WorldWideScience

Sample records for medical applications radioaktive

  1. Radioactive implants for medical applications; Radioaktive Implantate fuer medizinische Anwendungen

    Energy Technology Data Exchange (ETDEWEB)

    Schubert, M.

    2008-07-01

    The long-term success of surgery is often diminished by excessive wound healing, which makes another intervention necessary. Locally applied radionuclides with short range radiation can prevent such benign hyperproliferation. As pure electron emitter with a half-life of 14.3 days and a mean energy of 694.9 keV (E{sub max}=1710.48 keV) {sup 32}P is a suitable radionuclide which can be produced from the stable {sup 31}P by the capture of thermal neutrons (1 x 10{sup 14} /s/cm{sup 2}) in a nuclear reactor. After a typical irradiation time (14 days) the ratio of {sup 32}P to {sup 31}P is 1.4 x 10{sup -5} to 1. Implants made of polymer and/or bioabsorbable material functioning as a carrier of the radioactive emitter allow - as opposed to metallic implants - for new applications for this type of radiotherapy. In this thesis a manufacturing method for previously not available organic, radioactive implants has been developed and a corresponding dosimetry system has been established. By means of ion implantation, {sup 32}P ions with up to 180 keV can be shot some 100 nm deep into organic implant materials. For a typical dose (15 Gy over 7 days, 1 mm distance from the implant) an activity of 75 kBq is needed corresponding to 1.3 x 10{sup 11} {sup 32}P ions. The sputter ion gun, which has been optimized for this application, creates an ion beam with high beam current (> 14 {mu}A P{sup -}) and low emittance (< 4 {pi} mm mrad {radical}(MeV)). Because of the good beam quality also small implants (<1 mm{sup 2}) can be manufactured with high efficiency. The unintentionally co-implanted portion of molecules and nuclides of the same mass (e.g. {sup 31}PH, {sup 16}O{sub 2} and {sup 32}S) could be reduced from approximately 500 to 50 by an improvement of the isotope selection at {sup 32}P beam creation. Hence, in comparison with the best hitherto existing implantation methods, the radiation dose of the implant could be reduced by an order of magnitude. With regard to the beta

  2. Medical Applications

    OpenAIRE

    Biscari, C.; Falbo, L.

    2016-01-01

    The use of accelerators for medical applications has evolved from initial experimentation to turn-key devices commonly operating in hospitals. New applications are continuously being developed around the world, and the hadrontherapy facilities of the newest generation are placed at the frontier between industrial production and advanced R&D. An introduction to the different medical application accelerators is followed by a description of the hadrontherapy facilities, with special emphasis on ...

  3. Medical Applications

    CERN Document Server

    Biscari, C.

    2014-12-19

    The use of accelerators for medical applications has evolved from initial experimentation to turn-key devices commonly operating in hospitals. New applications are continuously being developed around the world, and the hadrontherapy facilities of the newest generation are placed at the frontier between industrial production and advanced R&D. An introduction to the different medical application accelerators is followed by a description of the hadrontherapy facilities, with special emphasis on CNAO, and the report closes with a brief outlook on the future of this field.

  4. Medical Applications

    International Nuclear Information System (INIS)

    Biscari, C; Falbo, L

    2014-01-01

    The use of accelerators for medical applications has evolved from initial experimentation to turn-key devices commonly operating in hospitals. New applications are continuously being developed around the world, and the hadrontherapy facilities of the newest generation are placed at the frontier between industrial production and advanced R&D. An introduction to the different medical application accelerators is followed by a description of the hadrontherapy facilities, with special emphasis on CNAO, and the report closes with a brief outlook on the future of this field

  5. Medical applications of accelerators

    CERN Document Server

    Rossi, Sandro

    1998-01-01

    At Present, about five thousands accelerators are devoted to biomedical applications. They are mainly used in radiotherapy, research and medical radioisotopes production. In this framework oncological hadron-therapy deserves particular attention since it represents a field in rapid evolution thanks to the joint efforts of laboratories with long experiences in particle physics. It is the case of CERN where the design of an optimised synchrotron for medical applications has been pursued. These lectures present these activities with particular attention to the new developments which are scientifically interesting and/or economically promising.

  6. Medical applications of cyclotrons

    International Nuclear Information System (INIS)

    Jean, R.; Fauchet, M.

    1978-01-01

    Isochronous cyclotrons used to accelerate different charged particles (protons, deuterons, alphas...) at variable energies, have important medical applications, for neutron teletherapy, in vivo or in vitro activation analysis or production of short-lived radioisotopes for nuclear medicine. The characteristics of the cyclotron presently available are described for these three applications (low energy 'compact' cyclotrons, cyclotrons of intermediate and high energies), and their advantages are discussed from the points of view of the medical requirements, the financial investments and the results obtained. (orig.) [de

  7. Medical applications of colloids

    CERN Document Server

    Matijevic, Egon

    2008-01-01

    The first book of its type on the medical and biomedical applications of colloids, although there are some related titles on different topicsDiscusses the effects of uniform particles in drug formulations and releaseEvaluates particle transport and deposition in the human body.

  8. Microfluidics for medical applications

    NARCIS (Netherlands)

    van den Berg, Albert; van den Berg, A.; Segerink, L.I.; Segerink, Loes Irene; Unknown, [Unknown

    2015-01-01

    Lab-on-a-chip devices for point of care diagnostics have been present in clinics for several years now. Alongside their continual development, research is underway to bring the organs and tissue on-a-chip to the patient, amongst other medical applications of microfluidics. This book provides the

  9. Radioisotopes for medical applications

    International Nuclear Information System (INIS)

    Carr, S.

    1998-01-01

    For more than 3 decades, the Australian Nuclear Science and Technology Organisation has been the country's main supplier of radioisotopes for medical applications. The use of radioisotopes in medicine has revolutionised the diagnosis, management and treatment of many serious diseases such as cancer, heart disease and stroke. It is also beginning to play a key role in neurological disorders such as Parkinson and Alzheimers disease and epilepsy. More recently there has been considerable growth in the application of nuclear medicine to treat sport-related injuries - especially wrist, ankle and knees where more common techniques do not always enable accurate diagnosis. Australia is a recognised leader in nuclear medicine. This can be partially attributed to the close relationship between ANSTO and the medical community in providing opportunities to develop and evaluate new agents to support more effective patient care. A list of commercial isotopes produced in the reactor or the cyclotron and used in medical applications is given. Nuclear medicine plays an important role in the clinical environment and the timely supply of radioisotopes is a key element. ANSTO will continue to be the premier supplier of currently available and developing isotopes to support the health and well being of the Australian community

  10. Radioisotopes for medical applications

    Energy Technology Data Exchange (ETDEWEB)

    Carr, S. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia). Radiopharmaceuticals Division

    1998-03-01

    For more than 3 decades, the Australian Nuclear Science and Technology Organisation has been the country`s main supplier of radioisotopes for medical applications. The use of radioisotopes in medicine has revolutionised the diagnosis, management and treatment of many serious diseases such as cancer, heart disease and stroke. It is also beginning to play a key role in neurological disorders such as Parkinson and Alzheimers disease and epilepsy. More recently there has been considerable growth in the application of nuclear medicine to treat sport-related injuries - especially wrist, ankle and knees where more common techniques do not always enable accurate diagnosis. Australia is a recognised leader in nuclear medicine. This can be partially attributed to the close relationship between ANSTO and the medical community in providing opportunities to develop and evaluate new agents to support more effective patient care. A list of commercial isotopes produced in the reactor or the cyclotron and used in medical applications is given. Nuclear medicine plays an important role in the clinical environment and the timely supply of radioisotopes is a key element. ANSTO will continue to be the premier supplier of currently available and developing isotopes to support the health and well being of the Australian community 2 tabs., 1 fig.

  11. Radiotracers for medical applications

    International Nuclear Information System (INIS)

    Rayudu, G.A.S.

    1983-01-01

    This book discusses the medical applications of radiotracers. Diagnostic uses and pharmacokinetics of isotopes and radiopharmaceuticals is emphasized. The volume one covers the following topics: Radiohalogenated compounds, including radioiodine; Tc-labeled compounds; and in-house prepared radiopharmaceuticals. The charge particle range vs. energy in every element is tabulated for protons for cyclotrons users. Discussions are also provided on nonimaging radiotracer methods; /sup 11/C, /sup 13/N, /sup 15/O, /sup 67/Ga. /sup 111/In, /sup 75/Se, /sup 123m/Te compounds; radioactive noble gases; and miscellaneous radiotracers for imaging. Vol. II: Pertinent nuclear science data such as radiation dosimetry, radionuclide production modes, radionuclides for therapy, human experimentation regulations and consent forms, and radiotracer laboratory designs are presented. 272 pp., 7 x 10, 1983, ISBN-0-8493-6016-1

  12. Medical application of EPR

    International Nuclear Information System (INIS)

    Eichhoff, Uwe; Hoefer, Peter

    2015-01-01

    Selected applications of continuous-wave EPR in medicine are reviewed. This includes detection of reactive oxygen and nitrogen species, pH measurements and oxymetry. Applications of EPR imaging are demonstrated on selected examples and future developments to faster imaging methods are discussed

  13. Accelerator development for medical applications

    International Nuclear Information System (INIS)

    Tanabe, Eiji

    2007-01-01

    Electron linear accelerators have been widely used in medical applications, especially in radiation therapy for cancer treatment. There are more than 7,000 medical electron linear accelerators in the world, treating over 250,000 patients per day. This paper reviews the current status of accelerator applications and technologies in radiation therapy, and presents the anticipated requirements for advanced radiation therapy technology in the foreseeable future. (author)

  14. Advanced Accelerators for Medical Applications

    Science.gov (United States)

    Uesaka, Mitsuru; Koyama, Kazuyoshi

    We review advanced accelerators for medical applications with respect to the following key technologies: (i) higher RF electron linear accelerator (hereafter “linac”); (ii) optimization of alignment for the proton linac, cyclotron and synchrotron; (iii) superconducting magnet; (iv) laser technology. Advanced accelerators for medical applications are categorized into two groups. The first group consists of compact medical linacs with high RF, cyclotrons and synchrotrons downsized by optimization of alignment and superconducting magnets. The second group comprises laser-based acceleration systems aimed of medical applications in the future. Laser plasma electron/ion accelerating systems for cancer therapy and laser dielectric accelerating systems for radiation biology are mentioned. Since the second group has important potential for a compact system, the current status of the established energy and intensity and of the required stability are given.

  15. Medical application of radioisotopes

    International Nuclear Information System (INIS)

    Choi, Chang Woon; Lim, S. M.; Kim, E. H.

    2000-05-01

    In this project, we studied following subjects: 1. Clinical research for radionuclide therapy 2. Development of in vitro assay method with radioisotope 3. Development of binary therapy; Boron neutron capture therapy and photodynamic therapy 4. Development of diagnostic methods in radionuclide imaging. The results can be applied for the following objectives: 1) Radionuclide therapy will be applied in clinical practice to treat the cancer patients or other diseases in multi-center trial 2) The newly developed monoclonal antibodies and biomolecules can be used in biology, chemistry or other basic life science research 3) The new methods for the analysis of therapeutic effects, such as dosimetry, and quantitative analysis methods of radioactivity, can be applied in basic research, such as radiation oncology and radiation biology 4) The result of the project will be expected to develop the new radioimmunoassay for drug monitoring following the clinical experiments 5) Boron porphyrin has been successfully labeled with iodine. This enables the pharmacodynamic study of the boron compound in human body 6) A method to evaluate the biological effect of neutrons on tumor cells has been developed 7) The establishment of macro- and microscopic dose assessment using alpha-track autoradiography 8) Clinical application of PDT in bladder cancers, oropharyngeal cancer and skin cancer 9) Radionuclide imaging of estrogen receptor in breast cancer, lipid metabolism, gene therapy, cancers, brain function and heart disease

  16. Medical application of radioisotopes

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Chang Woon; Lim, S M; Kim, E H [and others

    2000-05-01

    In this project, we studied following subjects: 1. Clinical research for radionuclide therapy 2. Development of in vitro assay method with radioisotope 3. Development of binary therapy; Boron neutron capture therapy and photodynamic therapy 4. Development of diagnostic methods in radionuclide imaging. The results can be applied for the following objectives: (1) Radionuclide therapy will be applied in clinical practice to treat the cancer patients or other diseases in multi-center trial (2) The newly developed monoclonal antibodies and biomolecules can be used in biology, chemistry or other basic life science research (3) The new methods for the analysis of therapeutic effects, such as dosimetry, and quantitative analysis methods of radioactivity, can be applied in basic research, such as radiation oncology and radiation biology (4) The result of the project will be expected to develop the new radioimmunoassay for drug monitoring following the clinical experiments (5) Boron porphyrin has been successfully labeled with iodine. This enables the pharmacodynamic study of the boron compound in human body (6) A method to evaluate the biological effect of neutrons on tumor cells has been developed (7) The establishment of macro- and microscopic dose assessment using alpha-track autoradiography (8) Clinical application of PDT in bladder cancers, oropharyngeal cancer and skin cancer (9) Radionuclide imaging of estrogen receptor in breast cancer, lipid metabolism, gene therapy, cancers, brain function and heart disease.

  17. Medical applications of nanotechnology.

    Science.gov (United States)

    Zdrojewicz, Zygmunt; Waracki, Mateusz; Bugaj, Bartosz; Pypno, Damian; Cabała, Krzysztof

    2015-10-29

    Nanotechnologies are new areas of research focusing on affecting matter at the atomic and molecular levels. It is beyond doubt that modern medicine can benefit greatly from it; thus nanomedicine has become one of the main branches of nanotechnological research. Currently it focuses on developing new methods of preventing, diagnosing and treating various diseases. Nanomaterials show very high efficiency in destroying cancer cells and are already undergoing clinical trials. The results are so promising that nanomaterials might become an alternative to traditional cancer therapy, mostly due to the fact that they allow cancer cells to be targeted specifically and enable detailed imaging of tissues, making planning further therapy much easier. Nanoscience might also be a source of the needed breakthrough in the fight against atherosclerosis, since nanostructures may be used in both preventing and increasing the stability of atherosclerotic lesions. One area of interest is creating nanomaterials that are not only efficient, but also well tolerated by the human body. Other potential applications of nanotechnology in medicine include: nanoadjuvants with immunomodulatory properties used to deliver vaccine antigens; the nano-knife, an almost non-invasive method of destroying cancer cells with high voltage electricity; and carbon nanotubes, which are already a popular way of repairing damaged tissues and might be used to regenerate nerves in the future. The aim of this article is to outline the potential uses of nanotechnology in medicine. Original articles and reviews have been used to present the new developments and directions of studies.

  18. Medical applications of nanotechnology

    Directory of Open Access Journals (Sweden)

    Zygmunt Zdrojewicz

    2015-10-01

    Full Text Available Nanotechnologies are new areas of research focusing on affecting matter at the atomic and molecular levels. It is beyond doubt that modern medicine can benefit greatly from it; thus nanomedicine has become one of the main branches of nanotechnological research. Currently it focuses on developing new methods of preventing, diagnosing and treating various diseases. Nanomaterials show very high efficiency in destroying cancer cells and are already undergoing clinical trials. The results are so promising that nanomaterials might become an alternative to traditional cancer therapy, mostly due to the fact that they allow cancer cells to be targeted specifically and enable detailed imaging of tissues, making planning further therapy much easier. Nanoscience might also be a source of the needed breakthrough in the fight against atherosclerosis, since nanostructures may be used in both preventing and increasing the stability of atherosclerotic lesions. One area of interest is creating nanomaterials that are not only efficient, but also well tolerated by the human body. Other potential applications of nanotechnology in medicine include: nanoadjuvants with immunomodulatory properties used to deliver vaccine antigens; the nano-knife, an almost non-invasive method of destroying cancer cells with high voltage electricity; and carbon nanotubes, which are already a popular way of repairing damaged tissues and might be used to regenerate nerves in the future.The aim of this article is to outline the potential uses of nanotechnology in medicine. Original articles and reviews have been used to present the new developments and directions of studies.

  19. Medical, energetic, environmental applications

    International Nuclear Information System (INIS)

    2007-01-01

    The boron neutron capture therapy (BNCT) project at ENEA is mainly based on the TAPIRO experimental nuclear reactor and (more recently) also on the TRIGA reactor, both located at ENEA Casaccia. TAPIRO has two facilities: an epithermal column (EPIMED) constructed for research on deep tumours, such as glioblastoma, and a thermal column (HYTHOR) mainly used in collaboration with the Legnaro National Laboratory (LNL) of the National Institute of Nuclear Physics (INFN) and with the University of Padua for in vivo radiobiological studies and neutron microdosimetry. The feasibility of using the thermal column of the TRIGA reactor to treat explanted livers with BNCT is being studied. The collaboration with INFN Pavia and the University of Pavia on applying BNCT to lung tumours continued. In 2007 the final agreement from the Italian Agency for Environmental Protection and Technical Services (APAT) was obtained and the reactor operating conditions with the EPIMED facility were established. As described in the 2006 Progress Report, the epithermal neutron beam (neutron energy between 1 eV and 10 keV) entering the reactor hall has been shielded by a bunker of limited volume, appropriate for beam characterisation with the reactor operating at a maximum 10% of nominal power (5 kW). The use of nuclear power in space is technically feasible but, due to the remote risk of an accident at launch or in the event of an uncontrolled re-entry, it still remains politically unacceptable. Nevertheless, small and safe nuclear reactors could generate 30-60 kW of electrical power for a period of 10-15 years even in the case of a deep space mission, where conventional energy conversion devices are useless or inefficient. Furthermore, the standard space systems for electrical power generation (photoelectric conversion and radioactive thermal generator) are unable to sustain similar performances even in orbital conditions. A carefully designed nuclear reactor for space application could also be

  20. Radiation protection in medical applications

    International Nuclear Information System (INIS)

    Maldonado M, H.

    2008-12-01

    The justification of the practices is the fundamental principle on which rests the peaceful use of ionizing radiations. They actually contain as aspirations to improve the quality of people's lives, contributing to sustainable development through environmental protection, so that the sources security and the individuals protection will be conditions which are not and should can not be operated. For medical applications is a highly illustrative example of this, since both for the diagnosis and therapy, the goal is to achieve what is sought for the white tissue, secured the least possible damage to the neighboring tissues so that in turn reduce the negative effects for the patient. As a basis for achieving the above, it is essential to have qualified personnel in all areas incidents, for example users, workers, officials and staff members. There are a variety of specialists in the field of medical applications as, nuclear chemistry, nuclear engineering, radiation protection, medical physics, radiation physics and others. Among the human resource in the country must make up the majority are medical radiologists, highlighting gaps in the number of radiotherapy and nuclear medicine but specially in the medical physics, who is in some way from a special viewpoint of the formal school, new to the country. This is true for the number of facilities which are in the country. The radiation protection responsibilities in medical applications focus primarily on two figures: the radiology safety manager, who is primarily dedicated to the protection of occupationally exposed personnel and the public, and the medical physicist whose functions are geared towards the radiological protection of the patient. The principal legislation in the medical applications area has been enacted and is monitored by the Health Secretary and National Commission on Nuclear Safety and Safeguards, entities that have reached agreements to avoid overlap and over-regulation. Medical applications in the

  1. Medical isotope applications in Iceland

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1962-10-15

    About $ 12 000 worth of equipment and the services of an expert in the medical applications of radioisotopes were provided by IAEA to the Government of Iceland. The expert was primarily concerned with the establishment of a medical radioisotope laboratory at the State Hospital, Reykjavik. His specific tasks included the setting up of the equipment furnished by IAEA for radioactive measurements in medical work, the establishment of techniques for the routine uses of radioisotopes in medicine, and the training of personnel. The apparatus installed includes a well-type scintillation counter for small samples, a directional scintillation counter, and Geiger counters of different types. The laboratory is thus well equipped for nearly all the conventional applications of radioisotopes in medicine, except those involving very soft beta-ray emitting isotopes

  2. CERN's role in medical applications

    CERN Multimedia

    Antonella Del Rosso

    2014-01-01

    Last week, CERN hosted the first meeting of the International Strategy Committee for medical applications. This Committee will help CERN establish its roadmap in the field of research and development activities for medical applications. Here the CERN Bulletin speaks with the Chair of the Committee as he shares his expectations and his vision.   Dr Michael Baumann is the Director of the Radiation Oncology department at the Carl Gustav Carus University Hospital in Dresden and of the Institute for Radiooncology of the Helmholtz-Zentrum Dresden-Rossendorf (Germany). He has recently been appointed Chair of CERN’s International Strategy Committee for medical applications – the team of experts who will advise the CERN Medical Applications Study Group led by Steve Myers. “CERN has a tremendous record in physics and basic research,” says Baumann. “I think that it has a very important role in steering some of the R&D that cannot be done at universities ...

  3. Polyetheretherketone (PEEK) for medical applications.

    Science.gov (United States)

    Panayotov, Ivan Vladislavov; Orti, Valérie; Cuisinier, Frédéric; Yachouh, Jacques

    2016-07-01

    Polyetheretherketone (PEEK) is a polyaromatic semi-crystalline thermoplastic polymer with mechanical properties favorable for bio-medical applications. Polyetheretherketone forms: PEEK-LT1, PEEK-LT2, and PEEK-LT3 have already been applied in different surgical fields: spine surgery, orthopedic surgery, maxillo-facial surgery etc. Synthesis of PEEK composites broadens the physicochemical and mechanical properties of PEEK materials. To improve their osteoinductive and antimicrobial capabilities, different types of functionalization of PEEK surfaces and changes in PEEK structure were proposed. PEEK based materials are becoming an important group of biomaterials used for bone and cartilage replacement as well as in a large number of diverse medical fields. The current paper describes the structural changes and the surface functionalization of PEEK materials and their most common biomedical applications. The possibility to use these materials in 3D printing process could increase the scientific interest and their future development as well.

  4. Medical applications of synchrotron radiation

    International Nuclear Information System (INIS)

    Thomlinson, W.

    1992-01-01

    Ever since the first diagnostic X-ray was done in the United States on February 3, 1896, the application of ionizing radiation to the field of medicine has become incrasingly important. Both in clinical medicine and basic research the use of X-rays for diagnostic imaging and radiotherapy is now widespread. Radiography, angiography, CAT and PETT scanning, mammography, and nuclear medicine are all examples of technologies developed to image the human anatomy. In therapeutic applications, both external and internal sources of radiation are applied to the battle against cancer. The development of dedicated synchrotron radiation sources has allowed exciting advances to take place in many of these applications. The new sources provide tunable, high-intensity monochromatic beams over a wide range of energies which can be tailored to specific programmatic needs. This paper surveys those areas of medical research in which synchrotron radiation facilities are actively involved. (orig.)

  5. Medical applications of synchrotron radiation

    International Nuclear Information System (INIS)

    Thomlinson, W.

    1991-10-01

    Ever since the first diagnostic x-ray was done in the United States on February 3, 1896, the application of ionizing radiation to the field of medicine has become increasingly important. Both in clinical medicine and basic research the use of x-rays for diagnostic imaging and radiotherapy is now widespread. Radiography, angiography, CAT and PETT scanning, mammography, and nuclear medicine are all examples of technologies developed to image the human anatomy. In therapeutic applications, both external and internal sources of radiation are applied to the battle against cancer. The development of dedicated synchrotron radiation sources has allowed exciting advances to take place in many of these applications. The new sources provide tunable, high-intensity monochromatic beams over a wide range of energies which can be tailored to specific programmatic needs. This paper surveys those areas of medical research in which synchrotron radiation facilities are actively involved

  6. Nuclear data for medical applications

    International Nuclear Information System (INIS)

    Capote, Roberto

    2011-01-01

    Nuclear science plays an increasingly important role in medical applications, in particular the need for radioisotopes in both cancer therapy and diagnostic techniques is very well established. Over the previous thirty years, many laboratories have reported a significant body of experimental data relevant to medical radionuclide production, and international data centres have compiled most of these data. However, till late 90s no systematic effort had been devoted to their standardization and assembly. These needs are being addressed through three IAEA Coordinated Research Projects on Nuclear Data for the Production of Radionuclides that started in 1999. Monitor cross sections to be used in charged particle measurements have been also evaluated (see http://www-nds.iaea.org/medical/monitor reactions.html). A review of IAEA recommended cross sections for the production of medical radioisotopes will be presented. Theoretical modelling of nuclear reactions will be discussed both for nuclear data evaluation and validation. The role of the Recommended Input Parameter Library (RIPL) in defining the input for production codes like EMPIRE and TALYS will be highlighted. (author)

  7. Radiation hazards from medical applications

    International Nuclear Information System (INIS)

    Beekman, Z.M.

    1981-01-01

    An introduction is presented on the radiation hazards connected with biomedical radiography and nuclear medicine. The frequency of radiodiagnostic efforts was rather high in the Netherlands. This was reduced considerably by abolishing the thorax screening of the population. About diagnostic nuclear medicine less can be said because far fewer numerical data are available. An exposition of genetically and somatically significant doses and how to compute them is given. The drawing up of a profit versus risk evaluation for medical applications of ionizing radiations is recommended. (Auth.)

  8. Medical applications of radioactive material

    International Nuclear Information System (INIS)

    Seidel, C.W.

    1990-01-01

    Hospitals, clinics and other medical complexes are probably the most extensive users of radioactive solutions of Tc-99m, Tl-201, Ga-67, I-123, Xe-133 and radiopharmaceuticals as diagnostic tools to evaluate the dynamic function of various organs in the body, detect cancerous tumors, sites of infection or other bodily dysfunctions. Examples of monitoring blood flow to a stressed heart and to the brain of a cocaine addict are shown. Short-lived positron emitting radionuclides (C-11, N-13, O-15 and F-18) are produced right in a hospital. Other radionuclides are used as therapeutics to reduce tumor size or kill diseased cells. Radioimmunoassay (RIA) is another medical diagnostic tool that is useful in the early detection of the AIDS virus and cancer as well as many other illnesses. Biological researchers, using radioactive biological compounds, have developed many of todays medical diagnostic procedures. Most of the recent Nobel Laureates in the life sciences have used radiolabeled compounds in their research. A brief review of these applications with several examples is presented

  9. Radiation protection in medical applications

    International Nuclear Information System (INIS)

    Sacc, R.A.; Rubiolo, J.; Herrero, F.

    1998-01-01

    Full text: The goal of this paper is to identify the areas in which radiation protection is actually needed and the relative importance of protection measures. A correlation between the different medical applications of the ionizing radiations and the associated risks, mainly due to ignorance, has been a constant throughout the history of mankind. At the beginning, the accidents were originated in research nuclear laboratories working on the atomic bomb, while the incidents occurred in medical areas because of virtual ignorance of the harmful effects on humans. The 60's were characterized by the oil fever, which produced innumerable accidents due to the practice of industrial radiography; in the 70's the use of radiations on medical applications was intensified, to such and extent that a new type of victim appeared: the patient. Unfortunately, during 80's and 90's the number of accidents in different medical practices has increased, projecting the occurred in Zaragoza (Spain) on 1990 with a linear accelerator for radiotherapy treatments. In some developed countries, foreseeing the probability of producing biological effects as a result of different radiology practices, more strict security rules are adopted to guarantee the application of the three principles of the radioprotection: justification, optimization and limitation of individual dose. In this way, in the U.S.A., the Joint Commission on Accreditation of Health Care Organization (JCAHO), favors a vigilance politics in the different departments of Radiodiagnostic and Nuclear Medicine to secure an effective management in security, communications and quality control, in which the medical physicists play an important role. One of the requirements for example is to attach the value of entrance exposition dose in the radiological diagnostic report. So, the doses in the different organs are compared with the tabulated doses. Basically, a quality control programme is designed to minimize the risks for patients

  10. Developing the Medication Reminder Mobile Application "Seeb".

    Science.gov (United States)

    Saghaeiannejad-Isfahani, Sakineh; Ehteshami, Asghar; Savari, Ebtesam; Samimi, Ali

    2017-06-01

    Today, the structure of comprehensive health care emphasizes self-care more than therapy. Medication therapy is a strong instrument for therapy received through the health setting, especially in medication area. Error in medication administration has produced different problems and they cost billions of dollars every year. Regarding mobile phone extensions, we developed a local medication reminder mobile application called "Seeb" as a suitable solution for decreasing medication errors for Iranians. We conducted a mixed methods study in three Phases: 1) Comparative study of existing mobile applications; 2) developed its object-oriented model; 3) Developed the initial version of "Seeb" that was approved for production. This application was designed for the appropriate medication administration including time and dosages through: recording patient and medication data; scheduling patients' medication; and reporting medication administration on progress. "Seeb" has been designed in compliance with Iranian health information technologists and pharmacists requirements. It is expected to reduce medication error and improve patient adherence to medical prescriptions.

  11. Contemporary vascular smartphone medical applications.

    Science.gov (United States)

    Carter, Thomas; O'Neill, Stephen; Johns, Neil; Brady, Richard R W

    2013-08-01

    Use of smartphones and medical mHealth applications (apps) within the clinical environment provides a potential means for delivering elements of vascular care. This article reviews the contemporary availability of apps specifically themed to major vascular diseases and the opportunities and concerns regarding their integration into practice. Smartphone apps relating to major vascular diseases were identified from the app stores for the 6 most popular smartphone platforms, including iPhone, Android, Blackberry, Nokia, Windows, and Samsung. Search terms included peripheral artery (arterial) disease, varicose veins, aortic aneurysm, carotid artery disease, amputation, ulcers, hyperhydrosis, thoracic outlet syndrome, vascular malformation, and lymphatic disorders. Forty-nine vascular-themed apps were identified. Sixteen (33%) were free of charge. Fifteen apps (31%) had customer satisfaction ratings, but only 3 (6%) had greater than 100. Only 13 apps (27%) had documented medical professional involvement in their design or content. The integration of apps into the delivery of care has the potential to benefit vascular health care workers and patients. However, high-quality apps designed by clinicians with vascular expertise are currently lacking and represent an area of concern in the mHealth market. Improvement in the quality and reliability of these apps will require the development of robust regulation. Copyright © 2013 Elsevier Inc. All rights reserved.

  12. Medical applications of artificial intelligence

    CERN Document Server

    Agah, Arvin

    2013-01-01

    Enhanced, more reliable, and better understood than in the past, artificial intelligence (AI) systems can make providing healthcare more accurate, affordable, accessible, consistent, and efficient. However, AI technologies have not been as well integrated into medicine as predicted. In order to succeed, medical and computational scientists must develop hybrid systems that can effectively and efficiently integrate the experience of medical care professionals with capabilities of AI systems. After providing a general overview of artificial intelligence concepts, tools, and techniques, Medical Ap

  13. Extracurricular activities of medical school applicants

    Directory of Open Access Journals (Sweden)

    Sang Hyun Kim

    2016-06-01

    Full Text Available Purpose: The purpose of this study was to investigate medical school applicants’ involvements in extracurricular activities including medical volunteering/community services, nonmedical community services, club activities, leadership role, and research. Methods: Extracurricular characteristics were compared for 448 applicants (223 males and 225 females who applied to Kangwon Medical School in 2013 to 2014. Frequency analysis, chi-square test, and simple correlation were conducted with the collected data. Results: The 448 applicants participated in medical volunteer/community services (15.3%, nonmedical community services (39.8%, club activities (22.9%, club officials (10%, and research (13.4%. On average, applicants from foreign universities participated in 0.9 medical volunteer/community service, 0.8 nonmedical community service, 1.7 club activities, and 0.6 research work. On the other hand, applicants from domestic universities reported 0.2 medical volunteer/community service, 1.0 nonmedical community service, 0.7 club activity, and 0.3 research. Conclusion: Involvement in extracurricular activities was extensive for medical school applicants. Participation in extracurricular activities differed between applicants from foreign and domestic universities. Females consistently reported greater participation in extracurricular activities than males. The data can be helpful for admission committees to recruit well-rounded applicants and compare between applicants with similar academic backgrounds.

  14. Molecular biosensing for medical applications

    NARCIS (Netherlands)

    Prins, M.W.J.

    2015-01-01

    An important challenge in today’s societies is that life expectancy and the prevalence of chronic conditions are increasing. This puts pressure on the healthcare system and raises a demand for easy to use and cost-effective medical technologies in order to manage chronic conditions outside large

  15. Medical applications in a nuclear research centre

    International Nuclear Information System (INIS)

    Vanhavere, F.; Eggermont, G.

    2001-01-01

    In these days of public aversion to nuclear power, it can be important to point at the medical applications of ionising radiation. Not only the general public, but also the authorities and research centres have to be aware of these medical applications, which are not without risk for public health. Now that funding for nuclear research is declining, an opening to the medical world can give new opportunities to a nuclear research centre. A lot of research could be done where the tools developed for the nuclear power world are very useful. Even new applications for the research reactors like BNCT (boron neutron capture therapy) can be envisaged for the near future. In this contribution an overview will be given of the different techniques used in the medical world with ionising radiation. The specific example of the Belgian Nuclear Research Centre will be given where the mission statement was changed to include a certain number of medical research topics. (authors)

  16. Printing Technologies for Medical Applications.

    Science.gov (United States)

    Shafiee, Ashkan; Atala, Anthony

    2016-03-01

    Over the past 15 years, printers have been increasingly utilized for biomedical applications in various areas of medicine and tissue engineering. This review discusses the current and future applications of 3D bioprinting. Several 3D printing tools with broad applications from surgical planning to 3D models are being created, such as liver replicas and intermediate splints. Numerous researchers are exploring this technique to pattern cells or fabricate several different tissues and organs, such as blood vessels or cardiac patches. Current investigations in bioprinting applications are yielding further advances. As one of the fastest areas of industry expansion, 3D additive manufacturing will change techniques across biomedical applications, from research and testing models to surgical planning, device manufacturing, and tissue or organ replacement. Copyright © 2016. Published by Elsevier Ltd.

  17. Applications of VLSI circuits to medical imaging

    International Nuclear Information System (INIS)

    O'Donnell, M.

    1988-01-01

    In this paper the application of advanced VLSI circuits to medical imaging is explored. The relationship of both general purpose signal processing chips and custom devices to medical imaging is discussed using examples of fabricated chips. In addition, advanced CAD tools for silicon compilation are presented. Devices built with these tools represent a possible alternative to custom devices and general purpose signal processors for the next generation of medical imaging systems

  18. Applications of Particle Accelerators in Medical Physics

    OpenAIRE

    Cuttone, G

    2008-01-01

    Particle accelerators are often associated to high energy or nuclear physics. As well pointed out in literature [1] if we kindly analyse the number of installation worldwide we can easily note that about 50% is mainly devoted to medical applications (radiotherapy, medical radioisotopes production, biomedical research). Particle accelerators are also playing an important indirect role considering the improvement of the technical features of medical diagnostic. In fact the use of radionuclide f...

  19. Modeling Medical Services with Mobile Health Applications

    Directory of Open Access Journals (Sweden)

    Zhenfei Wang

    2018-01-01

    Full Text Available The rapid development of mobile health technology (m-Health provides unprecedented opportunities for improving health services. As the bridge between doctors and patients, mobile health applications enable patients to communicate with doctors through their smartphones, which is becoming more and more popular among people. To evaluate the influence of m-Health applications on the medical service market, we propose a medical service equilibrium model. The model can balance the supply of doctors and demand of patients and reflect possible options for both doctors and patients with or without m-Health applications in the medical service market. In the meantime, we analyze the behavior of patients and the activities of doctors to minimize patients’ full costs of healthcare and doctors’ futility. Then, we provide a resolution algorithm through mathematical reasoning. Lastly, based on artificially generated dataset, experiments are conducted to evaluate the medical services of m-Health applications.

  20. Calibration services for medical applications of radiation

    Energy Technology Data Exchange (ETDEWEB)

    DeWerd, L.A.

    1993-12-31

    Calibration services for the medical community applications of radiation involve measuring radiation precisely and having traceability to the National Institute of Standards and Technology (NIST). Radiation therapy applications involve the use of ionization chambers and electrometers for external beams and well-type ionization chamber systems as well as radioactive sources for brachytherapy. Diagnostic x-ray applications involve ionization chamber systems and devices to measure other parameters of the x-ray machine, such as non-invasive kVp meters. Calibration laboratories have been established to provide radiation calibration services while maintaining traceability to NIST. New radiation applications of the medical community spur investigation to provide the future calibration needs.

  1. Calibration services for medical applications of radiation

    International Nuclear Information System (INIS)

    DeWerd, L.A.

    1993-01-01

    Calibration services for the medical community applications of radiation involve measuring radiation precisely and having traceability to the National Institute of Standards and Technology (NIST). Radiation therapy applications involve the use of ionization chambers and electrometers for external beams and well-type ionization chamber systems as well as radioactive sources for brachytherapy. Diagnostic x-ray applications involve ionization chamber systems and devices to measure other parameters of the x-ray machine, such as non-invasive kVp meters. Calibration laboratories have been established to provide radiation calibration services while maintaining traceability to NIST. New radiation applications of the medical community spur investigation to provide the future calibration needs

  2. Seminar Pediatrics. Medical and Technical Applications

    International Nuclear Information System (INIS)

    Montivero, M.; Nespral, D.O.; Alak, Maria del Carmen

    2012-01-01

    The Association of Biology and Nuclear Medicine has organized the 'Seminar Pediatrics - Medical and Technical Applications', held in Buenos Aires in May 2012, in order to collaborate with the scientific growth of nuclear medicine in pediatrics. The main topics covered were: management of pediatric patients and medical application in childhood, dosimetry in pediatric nuclear medicine, scope of radioisotope - studies in nephrourological pathologies, PET in pediatrics, among others.

  3. [Standards in Medical Informatics: Fundamentals and Applications].

    Science.gov (United States)

    Suárez-Obando, Fernando; Camacho Sánchez, Jhon

    2013-09-01

    The use of computers in medical practice has enabled novel forms of communication to be developed in health care. The optimization of communication processes is achieved through the use of standards to harmonize the exchange of information and provide a common language for all those involved. This article describes the concept of a standard applied to medical informatics and its importance in the development of various applications, such as computational representation of medical knowledge, disease classification and coding systems, medical literature searches and integration of biological and clinical sciences. Copyright © 2013 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

  4. Reconfigurable Antenna for Medical Applications

    Directory of Open Access Journals (Sweden)

    Elizabeth RUFUS

    2009-12-01

    Full Text Available Microwave imaging systems offer much promise for biomedical applications such as cancer detection because of their good penetration, non invasive and non ionizing nature and low cost. The resolution is one of the major problems faced in such systems, which can be improved by applying signal processing techniques. The key element for the microwave imaging system is the antenna. This paper present a fractal antenna which has low profile, light weight and is easy to be fabricated. It has been successfully demonstrated to have multiband characteristics. The simulated results show that the proposed antenna has very good radiation characteristics suitable for imaging applications.

  5. Applications of Particle Accelerators in Medical Physics

    CERN Document Server

    Cuttone, G

    2008-01-01

    Particle accelerators are often associated to high energy or nuclear physics. As well pointed out in literature [1] if we kindly analyse the number of installation worldwide we can easily note that about 50% is mainly devoted to medical applications (radiotherapy, medical radioisotopes production, biomedical research). Particle accelerators are also playing an important indirect role considering the improvement of the technical features of medical diagnostic. In fact the use of radionuclide for advanced medical imaging is strongly increasing either in conventional radiography (CT and MRI) and also in nuclear medicine for Spect an PET imaging. In this paper role of particle accelerators for medical applications will be presented together with the main solutions applied.

  6. Biomagnetics and bioimaging for medical applications

    Energy Technology Data Exchange (ETDEWEB)

    Ueno, Shoogo [Department of Biomedical Engineering, Graduate School of Medicine, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-0033 (Japan)]. E-mail: ueno@medes.m.u-tokyo.ac.jp; Sekino, Masaki [Department of Biomedical Engineering, Graduate School of Medicine, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-0033 (Japan)

    2006-09-15

    This paper reviews medical applications of the recently developed techniques in biomagnetics and bioimaging such as transcranial magnetic stimulation, magnetoencephalography, magnetic resonance imaging, cancer therapy based on magnetic stimulation, and magnetic control of cell orientation and cell growth. These techniques are leading medicine and biology into a new horizon through the novel applications of magnetism.

  7. Biomagnetics and bioimaging for medical applications

    International Nuclear Information System (INIS)

    Ueno, Shoogo; Sekino, Masaki

    2006-01-01

    This paper reviews medical applications of the recently developed techniques in biomagnetics and bioimaging such as transcranial magnetic stimulation, magnetoencephalography, magnetic resonance imaging, cancer therapy based on magnetic stimulation, and magnetic control of cell orientation and cell growth. These techniques are leading medicine and biology into a new horizon through the novel applications of magnetism

  8. Medical applications of californium-252

    International Nuclear Information System (INIS)

    Oliver, G.D. Jr.

    1975-01-01

    Primarily, californium-252 sources have been utilized in medicine for the treatment of neoplastic lesions. For five years, a coordinated effort between several cancer research institutions and national laboratories has developed the necessary physics, radiobiology, and engineering skills to establish an evaluation program for californium. Several more years of combined effort are required before it is known whether californium therapy is as good as or better than conventional therapy with sources like radium. Recently, development of diagnostic applications of californium in medicine has received attention. Studies comparing neutron decay activation analysis versus prompt capture gamma ray analysis are in progress. A hopeful application of prompt analysis with reasonable quantities (200 μg) of californium is the elemental analysis of bone in the human body. (U.S.)

  9. Medical and biomedical applications of shock waves

    CERN Document Server

    Loske, Achim M

    2017-01-01

    This book provides current, comprehensive, and clear explanations of the physics behind medical and biomedical applications of shock waves. Extracorporeal shock wave lithotripsy is one of the greatest medical advances of our time, and its techniques and clinical devices are continuously evolving. Further research continues to improve the understanding of calculi fragmentation and tissue-damaging mechanisms. Shock waves are also used in orthopedics and traumatology. Possible applications in oncology, cardiology, dentistry, gene therapy, cell transfection, transformation of fungi and bacteria, as well as the inactivation of microorganisms are promising approaches for clinical treatment, industrial applications and research. Medical and Biomedical Applications of Shock Waves is useful as a guide for students, technicians and researchers working in universities and laboratories. Chemists, biologists, physicians and veterinarians, involved in research or clinical practice will find useful advice, but also engineer...

  10. Physics for Medical Imaging Applications

    CERN Document Server

    Caner, Alesssandra; Rahal, Ghita

    2007-01-01

    The book introduces the fundamental aspects of digital imaging and covers four main themes: Ultrasound techniques and imaging applications; Magnetic resonance and MPJ in hospital; Digital imaging with X-rays; and Emission tomography (PET and SPECT). Each of these topics is developed by analysing the underlying physics principles and their implementation, quality and safety aspects, clinical performance and recent advancements in the field. Some issues specific to the individual techniques are also treated, e.g. choice of radioisotopes or contrast agents, optimisation of data acquisition and st

  11. Current trend of robotics application in medical

    International Nuclear Information System (INIS)

    Olanrewaju, O A; Faieza, A A; Syakirah, K

    2013-01-01

    The applications of robotics in recent years has emerged beyond the field of manufacturing or industrial robots itself. Robotics applications are now widely used in medical, transport, underwater, entertainment and military sector. In medical field, these applications should be emphasized in view of the increasing challenges due to the variety of findings in the field of medicine which requires new inventions to ease work process. The objective of this review paper is to study and presents the past and on-going research in medical robotics with emphasis on rehabilitation (assistive care) and surgery robotics which are certainly the two main practical fields where robots application are commonly used presently. The study found that, rehabilitation and surgery robotics applications grow extensively with the finding of new invention, as well as research that is being undertaken and to be undertaken. The importance of medical robot in medical industry is intended to offer positive outcomes to assist human business through a complicated task that involves a long period, accuracy, focus and other routines that cannot be accomplished by human ability alone.

  12. Medical applications with synchrotron radiation in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Takeda, T.; Itai, Y. [Univ. of Tsukuba, Inst. of Clinical Medicine, Tsukuba (Japan); Hyodo, K.; Ando, M. [KEK, Tsukuba (Japan); Akatsuka, T. [Yamagata Univ., Faculty of Engineering, Yamagata (Japan); Uyama, C. [National Cardiovascular Centre, Suita (Japan)

    1998-05-01

    In Japan, various medical applications of synchrotron X-ray imaging, such as angiography, monochromatic X-ray computed tomography (CT), radiography and radiation therapy, are being developed. In particular, coronary arteriography (CAG) is quite an important clinical application of synchrotron radiation. Using a two-dimensional imaging method, the first human intravenous CAG was carried out at KEK in May 1996; however, further improvements of image quality are required in clinical practice. On the other hand, two-dimensional aortographic CAG revealed canine coronary arteries as clearly as those on selective CAG, and coronary arteries less than 0.2 mm in diameter. Among applications of synchrotron radiation to X-ray CT, phase-contrast X-ray CT and fluorescent X-ray CT are expected to be very interesting future applications of synchrotron radiation. For actual clinical applications of synchrotron radiation, a medical beamline and a laboratory are now being constructed at SPring-8 in Harima. 55 refs.

  13. Medical applications for biomaterials in Bolivia

    CERN Document Server

    Arias, Susan

    2015-01-01

    This book investigates the potential medical benefits natural biomaterials can offer in developing countries by analyzing the case of Bolivia. The book explores the medical and health related applications of Bolivian commodities: quinoa, barley, sugarcane, corn, sorghum and sunflower seeds. This book helps readers better understand some of the key health concerns facing countries like Bolivia and how naturally derived biomaterials and therapeutics could help substantially alleviate many of their problems.

  14. Medical applications for pharmacists using mobile devices.

    Science.gov (United States)

    Aungst, Timothy Dy

    2013-01-01

    Mobile devices (eg, smartphones, tablet computers) have become ubiquitous and subsequently there has been a growth in mobile applications (apps). Concurrently, mobile devices have been integrated into health care practice due to the availability and quality of medical apps. These mobile medical apps offer increased access to clinical references and point-of-care tools. However, there has been little identification of mobile medical apps suitable for the practice of pharmacy. To address the shortage of recommendations of mobile medical apps for pharmacists in daily practice. Mobile medical apps were identified via the iTunes and Google Play Stores via the "Medical" app categories and key word searches (eg, drug information, medical calculators). In addition, reviews provided by professional mobile medical app review websites were used to identify apps. Mobile medical apps were included if they had been updated in the previous 3 months, were available in the US, used evidence-based information or literature support, had dedicated app support, and demonstrated stability. Exclusion criteria included apps that were not available in English, had advertisement bias, used nonreferenced sources, were available only via an institution-only subscription, and were web-based portals. Twenty-seven mobile apps were identified and reviewed that involved general pharmacy practice, including apps that involved drug references, clinical references, medical calculators, laboratory references, news and continuing medical education, and productivity. Mobile medical apps have a variety of features that are beneficial to pharmacy practice. Individual clinicians should consider several characteristics of these apps to determine which are suitable to incorporate into their daily practice.

  15. Medical applications of electromagnetic fields

    Science.gov (United States)

    Lai, Henry C.; Singh, Narendra P.

    2010-04-01

    In this article, we describe two possible applications of low-intensity non-ionizing electromagnetic fields (EMF) for the treatment of malaria and cancer, respectively. In malaria treatment, a low-intensity extremely-low frequency magnetic field can be used to induce vibration of hemozoin, a super-paramagnetic polymer particle, inside malaria parasites. This disturbance could cause free radical and mechanical damages leading to the death of the parasite. This concept has been tested in vitro on malaria parasites and found to be effective. This may provide a low cost effective treatment for malaria infection in humans. The rationale for cancer treatment using low-intensity EMF is based on two concepts that have been well established in the literature: (1) low-intensity non-thermal EMF enhances cytotoxic free radicals via the iron-mediated Fenton reaction; and (2) cancer cells have higher amounts of free iron, thus are more susceptible to the cytotoxic effects of EMF. Since normal cells contain minimal amount of free iron, the effect would be selectively targeting cancer cells. Thus, no adverse side effect would be expected as in traditional chemotherapy and radiation therapy. This concept has also been tested on human cancer cell and normal cells in vitro and proved to be feasible.

  16. Medical applications of electromagnetic fields

    Energy Technology Data Exchange (ETDEWEB)

    Lai, Henry C; Singh, Narendra P, E-mail: hlai@u.washington.ed [Department of Bioengineering, University of Washington, Seattle, WA 98195-5061 (United States)

    2010-04-15

    In this article, we describe two possible applications of low-intensity non-ionizing electromagnetic fields (EMF) for the treatment of malaria and cancer, respectively. In malaria treatment, a low-intensity extremely-low frequency magnetic field can be used to induce vibration of hemozoin, a super-paramagnetic polymer particle, inside malaria parasites. This disturbance could cause free radical and mechanical damages leading to the death of the parasite. This concept has been tested in vitro on malaria parasites and found to be effective. This may provide a low cost effective treatment for malaria infection in humans. The rationale for cancer treatment using low-intensity EMF is based on two concepts that have been well established in the literature: (1) low-intensity non-thermal EMF enhances cytotoxic free radicals via the iron-mediated Fenton reaction; and (2) cancer cells have higher amounts of free iron, thus are more susceptible to the cytotoxic effects of EMF. Since normal cells contain minimal amount of free iron, the effect would be selectively targeting cancer cells. Thus, no adverse side effect would be expected as in traditional chemotherapy and radiation therapy. This concept has also been tested on human cancer cell and normal cells in vitro and proved to be feasible.

  17. Medical applications of electromagnetic fields

    International Nuclear Information System (INIS)

    Lai, Henry C; Singh, Narendra P

    2010-01-01

    In this article, we describe two possible applications of low-intensity non-ionizing electromagnetic fields (EMF) for the treatment of malaria and cancer, respectively. In malaria treatment, a low-intensity extremely-low frequency magnetic field can be used to induce vibration of hemozoin, a super-paramagnetic polymer particle, inside malaria parasites. This disturbance could cause free radical and mechanical damages leading to the death of the parasite. This concept has been tested in vitro on malaria parasites and found to be effective. This may provide a low cost effective treatment for malaria infection in humans. The rationale for cancer treatment using low-intensity EMF is based on two concepts that have been well established in the literature: (1) low-intensity non-thermal EMF enhances cytotoxic free radicals via the iron-mediated Fenton reaction; and (2) cancer cells have higher amounts of free iron, thus are more susceptible to the cytotoxic effects of EMF. Since normal cells contain minimal amount of free iron, the effect would be selectively targeting cancer cells. Thus, no adverse side effect would be expected as in traditional chemotherapy and radiation therapy. This concept has also been tested on human cancer cell and normal cells in vitro and proved to be feasible.

  18. Hydrogels and their medical applications

    Science.gov (United States)

    Rosiak, Janusz M.; Yoshii, Fumio

    1999-05-01

    Biomaterials play a key role in most approaches for engineering tissues as substitutes for functional replacement, for components of devices related to therapy and diagnosis, for drug delivery systems and supportive scaffolds for guided tissue growth. Modern biomaterials could be composed of various components, e.g. metals, ceramics, natural tissues, polymers. In this last group, the hydrogels, hydrophilic polymeric gels with requested biocompatibility and designed interaction with living surrounding seem to be one of the most promising group of biomaterials. Especially, if they are formed by means of ionizing radiation. In early 1950s, the pioneers of the radiation chemistry of polymers began some experiments with radiation crosslinking of hydrophilic polymers. However, hydrogels were analyzed mainly from the point of view of the phenomenon associated with radiation synthesis, with topology of network and relation between radiation parameters of the processes. Fundamental monographs on radiation polymer physics and chemistry written by A. Charlesby (Atomic Radition and polymers, Pergamon Press, Oxford, 1960) and A. Chapiro (Radiation Chemistry of Polymeric Systems, Interscience, New York, 1962) proceed from this time. The noticeable interest in the application of radiation techniques to obtain hydrogels for biomedical purposes began in the late sixties as a result of the papers and patents invented by Japanese and American scientists, headed by Kaetsu in Japan and Hoffman in USA. Immobilization of biologically active species in hydrogel matrices, their use as drug delivery systems and enzyme traps as well as the modification of material surfaces to improve biocompatibility and their ability to bond antigens and antibodies had been the main subjects of these investigations. In this article a brief summary of investigations on mechanism and kinetics of radiation formation of hydrogels as well as some examples of commercialized hydrogel biomaterials have been

  19. Hydrogels and their medical applications

    International Nuclear Information System (INIS)

    Rosiak, Janusz M.; Yoshii, Fumio

    1999-01-01

    Biomaterials play a key role in most approaches for engineering tissues as substitutes for functional replacement, for components of devices related to therapy and diagnosis, for drug delivery systems and supportive scaffolds for guided tissue growth. Modern biomaterials could be composed of various components, e.g. metals, ceramics, natural tissues, polymers. In this last group, the hydrogels, hydrophilic polymeric gels with requested biocompatibility and designed interaction with living surrounding seem to be one of the most promising group of biomaterials. Especially, if they are formed by means of ionizing radiation. In early 1950s, the pioneers of the radiation chemistry of polymers began some experiments with radiation crosslinking of hydrophilic polymers. However, hydrogels were analyzed mainly from the point of view of the phenomenon associated with radiation synthesis, with topology of network and relation between radiation parameters of the processes. Fundamental monographs on radiation polymer physics and chemistry written by A. Charlesby (Atomic Radition and polymers, Pergamon Press, Oxford, 1960) and A. Chapiro (Radiation Chemistry of Polymeric Systems, Interscience, New York, 1962) proceed from this time. The noticeable interest in the application of radiation techniques to obtain hydrogels for biomedical purposes began in the late sixties as a result of the papers and patents invented by Japanese and American scientists, headed by Kaetsu in Japan and Hoffman in USA. Immobilization of biologically active species in hydrogel matrices, their use as drug delivery systems and enzyme traps as well as the modification of material surfaces to improve biocompatibility and their ability to bond antigens and antibodies had been the main subjects of these investigations. In this article a brief summary of investigations on mechanism and kinetics of radiation formation of hydrogels as well as some examples of commercialized hydrogel biomaterials have been

  20. Functionalized Nanodiamonds for Biological and Medical Applications.

    Science.gov (United States)

    Lai, Lin; Barnard, Amanda S

    2015-02-01

    Nanodiamond is a promising material for biological and medical applications, owning to its relatively inexpensive and large-scale synthesis, unique structure, and superior optical properties. However, most biomedical applications, such as drug delivery and bio-imaging, are dependent upon the precise control of the surfaces, and can be significantly affected by the type, distribution and stability of chemical funtionalisations of the nanodiamond surface. In this paper, recent studies on nanodiamonds and their biomedical applications by conjugating with different chemicals are reviewed, while highlighting the critical importance of surface chemical states for various applications.

  1. Linacs for medical and industrial applications

    International Nuclear Information System (INIS)

    Hamm, R.W.

    1986-01-01

    Linear accelerators for medical and industrial applications have become an important commercial business. Microwave electron linacs for cancer radiation therapy and high-energy industrial radiography form the bulk of this market, but these, as well as induction linacs, are now being offered for radiation processing applications such as sterilization of disposable medical products, food preservation and material modifications. The radio frequency quadrupole (RFQ) linac has now made the ion linac also practical for commercial applications in medicine and industry, including radiation therapy, isotope production, neutron production, materials modification, and energy transfer processes. Ion linacs for several of these applications will soon be commercially available. The market for both ion and electron linacs is expected to significantly grow in several exciting and important areas

  2. 21 CFR 515.10 - Medicated feed mill license applications.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Medicated feed mill license applications. 515.10... (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS MEDICATED FEED MILL LICENSE Applications § 515.10 Medicated feed mill license applications. (a) Medicated feed mill license applications (Forms FDA 3448) may...

  3. Regulatory frameworks for mobile medical applications.

    Science.gov (United States)

    Censi, Federica; Mattei, Eugenio; Triventi, Michele; Calcagnini, Giovanni

    2015-05-01

    A mobile application (app) is a software program that runs on mobile communication devices such as a smartphone. The concept of a mobile medical app has gained popularity and diffusion but its reference regulatory context has raised discussion and concerns. Theoretically, a mobile app can be developed and uploaded easily by any person or entity. Thus, if an app can have some effects on the health of the users, it is mandatory to identify its reference regulatory context and the applicable prescriptions.

  4. Medical applications of diamond particles & surfaces

    OpenAIRE

    Roger J Narayan; Ryan D. Boehm; Anirudha V. Sumant

    2011-01-01

    Diamond has been considered for use in several medical applications due to its unique mechanical, chemical, optical, and biological properties. In this paper, methods for preparing synthetic diamond surfaces and particles are described. In addition, recent developments involving the use of diamond in prostheses, sensing, imaging, and drug delivery applications are reviewed. These developments suggest that diamond-containing structures will provide significant improvements in the diagnosis and...

  5. Medical image informatics infrastructure design and applications.

    Science.gov (United States)

    Huang, H K; Wong, S T; Pietka, E

    1997-01-01

    Picture archiving and communication systems (PACS) is a system integration of multimodality images and health information systems designed for improving the operation of a radiology department. As it evolves, PACS becomes a hospital image document management system with a voluminous image and related data file repository. A medical image informatics infrastructure can be designed to take advantage of existing data, providing PACS with add-on value for health care service, research, and education. A medical image informatics infrastructure (MIII) consists of the following components: medical images and associated data (including PACS database), image processing, data/knowledge base management, visualization, graphic user interface, communication networking, and application oriented software. This paper describes these components and their logical connection, and illustrates some applications based on the concept of the MIII.

  6. Preface book Microfluidics for medical applications

    NARCIS (Netherlands)

    van den Berg, Albert; Segerink, Loes Irene

    2015-01-01

    This book presents an overview of the major microfluidics techniques and platforms used for medicine and medical applications, providing the reader with an overview of the recent developments in this field. It is divided in three parts: (1) tissue and organs on-chip, (2) microfluidics for medicine

  7. Curve Matching with Applications in Medical Imaging

    DEFF Research Database (Denmark)

    Bauer, Martin; Bruveris, Martins; Harms, Philipp

    2015-01-01

    In the recent years, Riemannian shape analysis of curves and surfaces has found several applications in medical image analysis. In this paper we present a numerical discretization of second order Sobolev metrics on the space of regular curves in Euclidean space. This class of metrics has several...

  8. Medical applications of superconducting quantum interference devices

    International Nuclear Information System (INIS)

    Uehara, Gen

    2011-01-01

    SQUIDs (Superconducting Quantum Interference Devices) are applied to clinical areas and basic medical science fields because of their potential for measuring a minute magnetic signal from the human body. Magnetoencephalography, one of their applications, is used for the functional mapping of the brain cortex before surgery and the localization of focus of epilepsy. Recently, their applications to the early-stage detection of dementia and the localization of brain ischemia are suggested. Another application of SQUIDs is magnetospinography, which detects the conduction block in spinal cord signal propagation. (author)

  9. Measuring emotional intelligence of medical school applicants.

    Science.gov (United States)

    Carrothers, R M; Gregory, S W; Gallagher, T J

    2000-05-01

    To discuss the development, pilot testing, and analysis of a 34-item semantic differential instrument for measuring medical school applicants' emotional intelligence (the EI instrument). The authors analyzed data from the admission interviews of 147 1997 applicants to a six-year BS/MD program that is composed of three consortium universities. They compared the applicants' scores on traditional admission criteria (e.g., GPA and traditional interview assessments) with their scores on the EI instrument (which comprised five dimensions of emotional intelligence), breaking the data out by consortium university (each of which has its own educational ethos) and gender. They assessed the EI instrument's reliability and validity for assessing noncognitive personal and interpersonal qualities of medical school applicants. The five dimensions of emotional intelligence (maturity, compassion, morality, sociability, and calm disposition) indicated fair to excellent internal consistency: reliability coefficients were .66 to .95. Emotional intelligence as measured by the instrument was related to both being female and matriculating at the consortium university that has an educational ethos that values the social sciences and humanities. Based on this pilot study, the 34-item EI instrument demonstrates the ability to measure attributes that indicate desirable personal and interpersonal skills in medical school applicants.

  10. Optical Fibre Pressure Sensors in Medical Applications

    Directory of Open Access Journals (Sweden)

    Sven Poeggel

    2015-07-01

    Full Text Available This article is focused on reviewing the current state-of-the-art of optical fibre pressure sensors for medical applications. Optical fibres have inherent advantages due to their small size, immunity to electromagnetic interferences and their suitability for remote monitoring and multiplexing. The small dimensions of optical fibre-based pressure sensors, together with being lightweight and flexible, mean that they are minimally invasive for many medical applications and, thus, particularly suited to in vivo measurement. This means that the sensor can be placed directly inside a patient, e.g., for urodynamic and cardiovascular assessment. This paper presents an overview of the recent developments in optical fibre-based pressure measurements with particular reference to these application areas.

  11. Optical Fibre Pressure Sensors in Medical Applications.

    Science.gov (United States)

    Poeggel, Sven; Tosi, Daniele; Duraibabu, DineshBabu; Leen, Gabriel; McGrath, Deirdre; Lewis, Elfed

    2015-07-15

    This article is focused on reviewing the current state-of-the-art of optical fibre pressure sensors for medical applications. Optical fibres have inherent advantages due to their small size, immunity to electromagnetic interferences and their suitability for remote monitoring and multiplexing. The small dimensions of optical fibre-based pressure sensors, together with being lightweight and flexible, mean that they are minimally invasive for many medical applications and, thus, particularly suited to in vivo measurement. This means that the sensor can be placed directly inside a patient, e.g., for urodynamic and cardiovascular assessment. This paper presents an overview of the recent developments in optical fibre-based pressure measurements with particular reference to these application areas.

  12. Mammalian synthetic biology: emerging medical applications.

    Science.gov (United States)

    Kis, Zoltán; Pereira, Hugo Sant'Ana; Homma, Takayuki; Pedrigi, Ryan M; Krams, Rob

    2015-05-06

    In this review, we discuss new emerging medical applications of the rapidly evolving field of mammalian synthetic biology. We start with simple mammalian synthetic biological components and move towards more complex and therapy-oriented gene circuits. A comprehensive list of ON-OFF switches, categorized into transcriptional, post-transcriptional, translational and post-translational, is presented in the first sections. Subsequently, Boolean logic gates, synthetic mammalian oscillators and toggle switches will be described. Several synthetic gene networks are further reviewed in the medical applications section, including cancer therapy gene circuits, immuno-regulatory networks, among others. The final sections focus on the applicability of synthetic gene networks to drug discovery, drug delivery, receptor-activating gene circuits and mammalian biomanufacturing processes. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

  13. Optical Fibre Pressure Sensors in Medical Applications

    Science.gov (United States)

    Poeggel, Sven; Tosi, Daniele; Duraibabu, DineshBabu; Leen, Gabriel; McGrath, Deirdre; Lewis, Elfed

    2015-01-01

    This article is focused on reviewing the current state-of-the-art of optical fibre pressure sensors for medical applications. Optical fibres have inherent advantages due to their small size, immunity to electromagnetic interferences and their suitability for remote monitoring and multiplexing. The small dimensions of optical fibre-based pressure sensors, together with being lightweight and flexible, mean that they are minimally invasive for many medical applications and, thus, particularly suited to in vivo measurement. This means that the sensor can be placed directly inside a patient, e.g., for urodynamic and cardiovascular assessment. This paper presents an overview of the recent developments in optical fibre-based pressure measurements with particular reference to these application areas. PMID:26184228

  14. Ionizing radiations: medical and industrial applications

    International Nuclear Information System (INIS)

    Vidal, H.

    1994-01-01

    Medical diagnosis with X-rays is the best known use of ionizing radiations on account of its wide diffusion (about 57 500 units in France). Other medical applications of artificial radionuclides involving a smaller number of installations are also well known, i.e. gamma teletherapy (167 units), brachytherapy (119 units) or therapy using unsealed sources (257 units). The industrial uses of ionising radiation, the diversity of which is very large, are generally less well known. The use of X- and gamma rays for non-destructive testing or food preservation and the use of tracers have some notoriety, but few people know that radioactive sources are involved in the measurement of parameters controlling industrial processes. The number of persons authorized to hold, use and/or sell artificial radionuclides amounts to about 4 800, all applications included. Approximately 650 of them are involved in therapy and 500 in medical research. The aim of this paper, which is not exhaustive, is to review a few typical applications of radionuclides both in the medical and industrial fields. It also supplies data both on the number of people authorized to use each technique and the radionuclides involved. (author). 10 tabs

  15. Nuclear data for medical applications: an overview

    International Nuclear Information System (INIS)

    Qaim, S.M.

    2002-01-01

    A brief introduction to nuclear data in medicine is given. The choice of a radioisotope for medical application demands an accurate knowledge of radioactive decay data. Short-lived single photon and beta sup + -emitters are preferred for diagnostic investigations, and longer-lived corpuscular radiation emitting radioisotopes for endo radiotherapy. The nuclear reaction cross section data, on the other hand, are needed for optimising the production routes. Besides radioactive isotopes, the use of ionising radiation in therapy is discussed. External radiation therapy has achieved an important place in medicine. The role of nuclear data is briefly discussed; they are needed for radiation dose calculations. The hitherto rather neglected activation products in proton therapy are considered. The methodology of development of a nuclear data file for medical applications is outlined. (author)

  16. Nuclear data for medical applications: an overview

    International Nuclear Information System (INIS)

    Qaim, S.M.

    2001-01-01

    A brief introduction to nuclear data in medicine is given. The choice of a radioisotope for medical application demands an accurate knowledge of radioactive decay data. Short-lived single photon and β + -emitters are preferred for diagnostic investigations, and longer-lived corpuscular radiation emitting radioisotopes for endoradiotherapy. The nuclear reaction cross section data, on the other hand, are needed for optimising the production routes. Besides radioactive isotopes, the use of ionising radiation in therapy is discussed. External radiation therapy has achieved an important place in medicine. The role of nuclear data is briefly discussed; they are needed for radiation dose calculations. The hitherto rather neglected activation products in proton therapy are considered. The methodology of development of a nuclear data file for medical applications is outlined. (orig.)

  17. Magnetic nanoparticle design for medical application

    Czech Academy of Sciences Publication Activity Database

    Mornet, S.; Vasseur, S.; Grasset, F.; Veverka, Pavel; Goglio, G.; Demourgues, A.; Portier, J.; Pollert, Emil; Duguet, E.

    2006-01-01

    Roč. 34, - (2006), s. 237-247 ISSN 0079-6786 R&D Projects: GA AV ČR(CZ) 1QS100100553; GA AV ČR(CZ) KAN200200651 Institutional research plan: CEZ:AV0Z10100521 Keywords : magnetic nanoparticles * medical applications * magnetic resonance imaging * magnetic hyperthermia Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.500, year: 2006

  18. Medical imaging technology reviews and computational applications

    CERN Document Server

    Dewi, Dyah

    2015-01-01

    This book presents the latest research findings and reviews in the field of medical imaging technology, covering ultrasound diagnostics approaches for detecting osteoarthritis, breast carcinoma and cardiovascular conditions, image guided biopsy and segmentation techniques for detecting lung cancer, image fusion, and simulating fluid flows for cardiovascular applications. It offers a useful guide for students, lecturers and professional researchers in the fields of biomedical engineering and image processing.

  19. Nano materials for Medical and Dental Applications

    International Nuclear Information System (INIS)

    Yub Kwon, T.; Oh, D.S.; Narayanan, R.

    2015-01-01

    Welcome to this special issue. Nano science and nano technology concepts are applicable across all fields of science and a more widespread application of nano materials and nano technologies is imminent or already occurring in many areas, including health care. Today is scientists take those cutting-edge technologies and concepts and apply them to medicine and dentistry. They are finding a wide variety of ways to make medical and dental materials at the nano scale to take advantage of their enhanced physical and biological properties.The purpose of this special issue is to publish high-quality research papers as well as review articles addressing recent advances in the field of nano materials for medical and dental applications. A particular interest is given to papers exploring or discussing nano materials and nano technologies related to delivery system, bonding substitutes, and surface modification techniques applicable in these areas. For this special issue, several investigators were invited to contribute original research findings that can stimulate continuing efforts to understand the cutting-edge applications of nano materials in medicine and dentistry.

  20. The regulation of mobile medical applications.

    Science.gov (United States)

    Yetisen, Ali Kemal; Martinez-Hurtado, J L; da Cruz Vasconcellos, Fernando; Simsekler, M C Emre; Akram, Muhammad Safwan; Lowe, Christopher R

    2014-03-07

    The rapidly expanding number of mobile medical applications have the potential to transform the patient-healthcare provider relationship by improving the turnaround time and reducing costs. In September 2013, the U.S. Food and Drug Administration (FDA) issued guidance to regulate these applications and protect consumers by minimising the risks associated with their unintended use. This guidance distinguishes between the subset of mobile medical apps which may be subject to regulation and those that are not. The marketing claims of the application determine the intent. Areas of concern include compliance with regular updates of the operating systems and of the mobile medical apps themselves. In this article, we explain the essence of this FDA guidance by providing examples and evaluating the impact on academia, industry and other key stakeholders, such as patients and clinicians. Our assessment indicates that awareness and incorporation of the guidelines into product development can hasten the commercialisation and market entry process. Furthermore, potential obstacles have been discussed and directions for future development suggested.

  1. From Particle Physics to Medical Applications

    Science.gov (United States)

    Dosanjh, Manjit

    2017-06-01

    CERN is the world's largest particle physics research laboratory. Since it was established in 1954, it has made an outstanding contribution to our understanding of the fundamental particles and their interactions, and also to the technologies needed to analyse their properties and behaviour. The experimental challenges have pushed the performance of particle accelerators and detectors to the limits of our technical capabilities, and these groundbreaking technologies can also have a significant impact in applications beyond particle physics. In particular, the detectors developed for particle physics have led to improved techniques for medical imaging, while accelerator technologies lie at the heart of the irradiation methods that are widely used for treating cancer. Indeed, many important diagnostic and therapeutic techniques used by healthcare professionals are based either on basic physics principles or the technologies developed to carry out physics research. Ever since the discovery of x-rays by Roentgen in 1895, physics has been instrumental in the development of technologies in the biomedical domain, including the use of ionizing radiation for medical imaging and therapy. Some key examples that are explored in detail in this book include scanners based on positron emission tomography, as well as radiation therapy for cancer treatment. Even the collaborative model of particle physics is proving to be effective in catalysing multidisciplinary research for medical applications, ensuring that pioneering physics research is exploited for the benefit of all.

  2. Polymer Based Biosensors for Medical Applications

    DEFF Research Database (Denmark)

    Cherré, Solène; Rozlosnik, Noemi

    2015-01-01

    , environmental monitoring and food safety. The detected element varies from a single molecule (such as glucose), a biopolymer (such as DNA or a protein) to a whole organism (such as bacteria). Due to their easy use and possible miniaturization, biosensors have a high potential to come out of the lab...... and be available for use by everybody. To fulfil these purposes, polymers represent very appropriate materials. Many nano- and microfabrication methods for polymers are available, allowing a fast and cheap production of devices. This chapter will present the general concept of a biosensor in a first part......The objective of this chapter is to give an overview about the newest developments in biosensors made of polymers for medical applications. Biosensors are devices that can recognize and detect a target with high selectivity. They are widely used in many fields such as medical diagnostic...

  3. Attitudes of Medical Graduate and Undergraduate Students toward the Learning and Application of Medical Statistics

    Science.gov (United States)

    Wu, Yazhou; Zhang, Ling; Liu, Ling; Zhang, Yanqi; Liu, Xiaoyu; Yi, Dong

    2015-01-01

    It is clear that the teaching of medical statistics needs to be improved, yet areas for priority are unclear as medical students' learning and application of statistics at different levels is not well known. Our goal is to assess the attitudes of medical students toward the learning and application of medical statistics, and discover their…

  4. Optical polymers for laser medical applications

    Science.gov (United States)

    Sultanova, Nina G.; Kasarova, Stefka N.; Nikolov, Ivan D.

    2016-01-01

    In medicine, optical polymers are used not only in ophthalmology but in many laser surgical, diagnostic and therapeutic systems. The application in lens design is determined by their refractive and dispersive properties in the considered spectral region. We have used different measuring techniques to obtain precise refractometric data in the visible and near-infrared spectral regions. Dispersive, thermal and other important optical characteristics of polymers have been studied. Design of a plastic achromatic objective, used in a surgical stereo-microscope at 1064 nm laser wavelength, is accomplished. Geometrical and wavefront aberrations are calculated. Another example of application of polymers is the designed all-mirror apochromatic micro-lens, intended for superluminescent diode fiber coupling in medical systems.

  5. Portable mini gamma camera for medical applications

    CERN Document Server

    Porras, E; Benlloch, J M; El-Djalil-Kadi-Hanifi, M; López, S; Pavon, N; Ruiz, J A; Sánchez, F; Sebastiá, A

    2002-01-01

    A small, portable and low-cost gamma camera for medical applications has been developed and clinically tested. This camera, based on a scintillator crystal and a Position Sensitive Photo-Multiplier Tube, has a useful field of view of 4.6 cm diameter and provides 2.2 mm of intrinsic spatial resolution. Its mobility and light weight allow to reach the patient from any desired direction. This camera images small organs with high efficiency and so addresses the demand for devices of specific clinical applications. In this paper, we present the camera and briefly describe the procedures that have led us to choose its configuration and the image reconstruction method. The clinical tests and diagnostic capability are also presented and discussed.

  6. Synchrotron radiation applications in medical research

    International Nuclear Information System (INIS)

    Thomlinson, W.

    1995-01-01

    The medical projects employing synchrotron radiation as discussed in this paper are, for the most part, still in their infancies and no one can predict the direction in which they will develop. Both the basic research and applied medical programs are sure to be advanced at the new facilities coming on line, especially the ESRF and Spring- 8. However, success is not guaranteed. There is a lot of competition from advances in conventional imaging with the development of digital angiography, computed tomography, functional magnetic resonance imaging and ultrasound. The synchrotron programs will have to provide significant advantages over these modalities in order to be accepted by the medical profession. Advances in image processing and potentially the development of compact sources will be required in order to move the synchrotron developed imaging technologies into the clinical world. In any event, it can be expected that the images produced by the synchrotron technologies will establish ''gold standards'' to be targeted by conventional modalities. A lot more work needs to be done in order to bring synchrotron radiation therapy and surgery to the level of human studies and, subsequently, to clinical applications

  7. Responsibility structure in medical radiation applications

    International Nuclear Information System (INIS)

    Beekman, Z.M.

    1989-01-01

    The author discusses the various aspects of the responsibilities of physicians and clinical physicists with regard to radiation protection in medical applications of ionizing radiation. It becomes still clearer that the physician, who carries out the examination or the treatment, also has to bear the responsibility. this holds for the indication assessment as well as for optimization of the quality of the examination or treatment versus radiation burden of the patient, radiologic worker and thirds. Further it is clear that the physician in these will have to delegate specific tasks and responsibilities, whether or not in the elongated-arm construction. The clinical physicist is responsible in particular for the applications of the physical methods and watches the quality of the apparatus and methods used. As such he also is responsible for the technical workers, who take care of the preventive and corrective maintenance. The principal responsibility of the clinical physicist however lies in the field of standardization and calibration of medical-physical instruments. Besides this investigation into and development of new techniques, methods and apparatus come up, while also education and training of various profession groups involved need attention. (author). 6 refs.; 1 tab

  8. Liquid Marbles: From Industrial to Medical Applications

    Directory of Open Access Journals (Sweden)

    Roxana-Elena Avrămescu

    2018-05-01

    Full Text Available Liquid marbles are versatile structures demonstrating a pseudo-Leidenfrost wetting regime formed by encapsulating microscale volumes of liquid in a particle shell. The liquid core is completely separated from the exterior through air pockets. The external phase consists of hydrophobic particles, in most cases, or hydrophilic ones distributed as aggregates. Their interesting features arise from the double solid-fluid character. Thus, these interesting formations, also known as “dry waters”, have gained attention in surface science. This review paper summarizes a series of proposed formulations, fabrication techniques and properties, in correlation with already discovered and emerging applications. A short general review of the surface properties of powders (contact angle, superficial tension is proposed, followed by a presentation of liquid marbles’ properties (superficial characteristics, elasticity, self-propulsion etc.. Finally, applications of liquid marbles are discussed, mainly as helpful and yet to be exploited structures in the pharmaceutical and medical field. Innovative pharmaceutical forms (Pickering emulsions are also means of use taken into account as applications which need further investigation.

  9. Medical Applications of Laser Induced Breakdown Spectroscopy

    International Nuclear Information System (INIS)

    Pathak, A K; Rai, N K; Singh, Ankita; Rai, A K; Rai, Pradeep K; Rai, Pramod K

    2014-01-01

    Sedentary lifestyle of human beings has resulted in various diseases and in turn we require a potential tool that can be used to address various issues related to human health. Laser Induced Breakdown Spectroscopy (LIBS) is one such potential optical analytical tool that has become quite popular because of its distinctive features that include applicability to any type/phase of samples with almost no sample preparation. Several reports are available that discusses the capabilities of LIBS, suitable for various applications in different branches of science which cannot be addressed by traditional analytical methods but only few reports are available for the medical applications of LIBS. In the present work, LIBS has been implemented to understand the role of various elements in the formation of gallstones (formed under the empyema and mucocele state of gallbladder) samples along with patient history that were collected from Purvancal region of Uttar Pradesh, India. The occurrence statistics of gallstones under the present study reveal higher occurrence of gallstones in female patients. The gallstone occurrence was found more prevalent for those male patients who were having the habit of either tobacco chewing, smoking or drinking alcohols. This work further reports in-situ LIBS study of deciduous tooth and in-vivo LIBS study of human nail

  10. Aerosol generation and delivery in medical applications

    International Nuclear Information System (INIS)

    Soni, P.S.; Raghunath, B.

    1998-01-01

    It is well established that radioaerosol lung technique by inhalation is a very versatile technique in the evaluation of health effects and medical diagnostic applications, especially to detect chronic obstructive pulmonary diseases, their defence mechanism permeability and many others. Most important part of aerosol technology is to generate reproducibly stable diagnostic radioaerosols of known characteristics. Many compressed air atomisers are commercially available for generating aerosols but they have limited utility in aerosol inhalation, either because of large droplet size, low aerosol output or high airflow rates. There is clearly a need for a versatile and economical aerosol generation/inhalation system that can produce dry labelled aerosol particles with high deep lung delivery efficiency suitable for clinical studies. BARC (Bhabha Atomic Research Centre) has developed a dry aerosol generation/delivery system which operates on compressed air and generates dry polydisperse aerosols. This system is described along with an assessment of the aerosol characteristics and efficiency for diagnosis of various respiratory disorders

  11. From particle physics to medical applications

    CERN Document Server

    Dosanjh, Manjit

    2017-01-01

    CERN is the world's largest particle physics research laboratory. Since it was established in 1954, it has made an outstanding contribution to our understanding of the fundamental particles and their interactions, and also to the technologies needed to analyse their properties and behaviour. The experimental challenges have pushed the performance of particle accelerators and detectors to the limits of our technical capabilities, and these groundbreaking technologies can also have a significant impact in applications beyond particle physics. In particular, the detectors developed for particle physics have led to improved techniques for medical imaging, while accelerator technologies lie at the heart of the irradiation methods that are widely used for treating cancer. Indeed, many important diagnostic and therapeutic techniques used by healthcare professionals are based either on basic physics principles or the technologies developed to carry out physics research. Ever since the discovery of x-rays by Roentgen...

  12. Plasma treatment: A Novel Medical Application

    International Nuclear Information System (INIS)

    Boonyawan, Dheerawan

    2015-01-01

    Cold atmospheric plasma (CAP) for the medical treatment is a new field in plasma application, called plasma medicine. CAP contrains mix of excited atoms and molecules, UV photons, charged particles as well as reactive oxygen species (ROS) and reactive nitrogen species (RNS). Typical species in air CAPs are O 3 , OH, N x , and HNO x . Two cold atomospheric plasma devices were utiized (either in an indirect or a direct way) for the treatment of physiologically healthy volunterrs, The results show that CAP is effective againts chronic wound infections and/ or for skin treatment in clinical trials. The current developments in this field have fuelled the hope that CAP could be, and interesting new therapeutic apptoach in the treatment of cancer.

  13. Medical applications of infrared thermography: A review

    Science.gov (United States)

    Lahiri, B. B.; Bagavathiappan, S.; Jayakumar, T.; Philip, John

    2012-07-01

    Abnormal body temperature is a natural indicator of illness. Infrared thermography (IRT) is a fast, passive, non-contact and non-invasive alternative to conventional clinical thermometers for monitoring body temperature. Besides, IRT can also map body surface temperature remotely. Last five decades witnessed a steady increase in the utility of thermal imaging cameras to obtain correlations between the thermal physiology and skin temperature. IRT has been successfully used in diagnosis of breast cancer, diabetes neuropathy and peripheral vascular disorders. It has also been used to detect problems associated with gynecology, kidney transplantation, dermatology, heart, neonatal physiology, fever screening and brain imaging. With the advent of modern infrared cameras, data acquisition and processing techniques, it is now possible to have real time high resolution thermographic images, which is likely to surge further research in this field. The present efforts are focused on automatic analysis of temperature distribution of regions of interest and their statistical analysis for detection of abnormalities. This critical review focuses on advances in the area of medical IRT. The basics of IRT, essential theoretical background, the procedures adopted for various measurements and applications of IRT in various medical fields are discussed in this review. Besides background information is provided for beginners for better understanding of the subject.

  14. Fiber optic temperature sensors for medical applications

    Science.gov (United States)

    Schaafsma, David T.; Palmer, Gail; Bechtel, James H.

    2003-07-01

    Recent developments in fiber-optic sensor technology have demonstrated the utility of fiber-optic sensors for both medical and industrial applications. Fiber sensors based on fluorescent decay of rare earth doped materials allow rapid and accurate temperature measurement in challenging environments. Here we review the principles of operation of these sensors with a rare earth doped probe material and demonstrate why this material is an excellent choice for these types of sensors. The decay time technique allows accurate temperature determination from two measurements of the fluorescence intensity at a well-defined time interval. With this method, all instrumental and extraneous environmental effect will cancel, thus providing an accurate temperature measurement. Stability data will be presented for the fiber-optic probes. For medical applications, new breakthroughs in RF ablation technology and electro-surgical procedures are being introduced as alternative, less invasive treatment for removal of small tumors and for removal of plaque within arteries as a preventive treatment that avoids open heart surgery. The availability of small diameter temperature probes (230 microns or 450 microns in diameter) offers a whole new scope to temperature measurement. Accurate and reliable temperature monitoring during any laser treatment procedure or RF ablation at the surgical site is critical. Precise, NIST traceable reliable results are needed to prevent overheating or underheating during treatment. In addition, how interventional catheters are used in hyperthermia studies and the advantages to having flexible cables and multiple sensors are discussed. Preliminary data is given from an animal study where temperature was monitored in a pig during an RF study.

  15. BR2 reactor: medical and industrial applications

    International Nuclear Information System (INIS)

    Ponsard, B.

    2005-01-01

    The radioisotopes are produced for various applications in the nuclear medicine (diagnostic, therapy, palliation of metastatic bone pain), industry (radiography of welds, ...), agriculture (radiotracers, ...) and basic research. Due to the availability of high neutron fluxes (thermal neutron flux up to 10 15 n/cm 2 .s), the BR2 reactor is considered as a major facility through its contribution for a continuous supply of products such 99 Mo ( 99 mTc), 131 I, 133 Xe, 192 Ir, 186 Re, 153 Sm, 90 Y, 32 P, 188 W ( 188 Re), 203 Hg, 82 Br, 41 Ar, 125 I, 177 Lu, 89 Sr, 60 Co, 169 Yb, 147 Nd, and others. Neutron Transmutation Doped (NTD) silicon is produced for the semiconductor industry in the SIDONIE (Silicon Doping by Neutron Irradiation Experiment) facility, which is designed to continuously rotate and traverse the silicon through the neutron flux. These combined movements produce exceptional dopant homogeneity in batches of silicon measuring 4 and 5-inches in diameter by up to 750 mm in length. The main objectives of work performed were to provide a reliable and qualitative supply of radioisotopes and NTD-silicon to the customers in accordance with a quality system that has been certified to the requirements of the EN ISO 9001: 2000. This new Quality System Certificate has been obtained in November 2003 for the Production of radioisotopes for medical and industrial applications and the Production of Neutron Transmutation Doped (NTD) Silicon in the BR2 reactor

  16. Tunable white light source for medical applications

    Science.gov (United States)

    Blaszczak, Urszula J.; Gryko, Lukasz; Zajac, Andrzej

    2017-08-01

    Development of light-emitting diodes has brought new possibilities in many applications, especially in terms of flexible adjustment of light spectra. This feature is very useful in construction of many devices, for example for medical diagnosis and treatment. It was proved, that in some cases LEDs can easily replace lasers during therapy of cancer without reduction of efficiency of this process. On the other hand during diagnosis process LED-based constructions can provide unique ability to adjust the color temperature of the output light while maintaining high color rendering. It allows for optimum surface contrast and enhanced tissue differentiation at the operator site. In the paper we describe the construction of the tunable LED-based source designed for application in endoscopy. It was optimized from the point of view of the color rendition for 5 different correlated color temperatures (illuminant A, D55, D65, 3500K and 4500K) with the restriction of very high (>90) values of general and specific color rendering indexes (according to Ra method). The source is composed of 13 light-emitting diodes from visible region mounted on the common radiator and controlled by dedicated system. Spectra of the components are mixed and the spectra of output light is analyzed. On the basis of obtained spectra colorimetric parameters are calculated and compared with the results of theoretical analysis.

  17. [VR and AR Applications in Medical Practice and Education].

    Science.gov (United States)

    Hsieh, Min-Chai; Lin, Yu-Hsuan

    2017-12-01

    As technology advances, mobile devices have gradually turned into wearable devices. Furthermore, virtual reality (VR), augmented reality (AR), and mixed reality (MR) are being increasingly applied in medical fields such as medical education and training, surgical simulation, neurological rehabilitation, psychotherapy, and telemedicine. Research results demonstrate the ability of VR, AR, and MR to ameliorate the inconveniences that are often associated with traditional medical care, reduce incidents of medical malpractice caused by unskilled operations, and reduce the cost of medical education and training. What is more, the application of these technologies has enhanced the effectiveness of medical education and training, raised the level of diagnosis and treatment, improved the doctor-patient relationship, and boosted the efficiency of medical execution. The present study introduces VR, AR, and MR applications in medical practice and education with the aim of helping health professionals better understand the applications and use these technologies to improve the quality of medical care.

  18. Bioadhesives for internal medical applications: A review.

    Science.gov (United States)

    Zhu, Wenzhen; Chuah, Yon Jin; Wang, Dong-An

    2018-04-22

    Bioadhesives such as tissue adhesives, hemostatic agents, and tissue sealants have gained increasing popularity in different areas of clinical operations during the last three decades. Bioadhesives can be categorized into internal and external ones according to their application conditions. External bioadhesives are generally applied in topical medications such as wound closure and epidermal grafting. Internal bioadhesives are mainly used in intracorporal conditions with direct contact to internal environment including tissues, organs and body fluids, such as chronic organ leak repair and bleeding complication reduction. This review focuses on internal bioadhesives that, in contrast with external bioadhesives, emphasize much more on biocompatibility and adhesive ability to wet surfaces rather than on gluing time and intensity. The crosslinking mechanisms of present internal bioadhesives can be generally classified as follows: 1) chemical conjugation between reactive groups; 2) free radical polymerization by light or redox initiation; 3) biological or biochemical coupling with specificity; and 4) biomimetic adhesion inspired from natural phenomena. In this review, bioadhesive products of each class are summarized and discussed by comparing their designs, features, and applications as well as their prospects for future development. Despite the emergence of numerous novel bioadhesive formulations in recent years, thus far, the classification of internal and external bioadhesives has not been well defined and universally acknowledged. Many of the formulations have been proposed for treatment of several diseases even though they are not applicable for such conditions. This is because of the lack of a systematic standard or evaluation protocol during the development of a new adhesive product. In this review, the definition of internal and external bioadhesives is given for the first time, and with a focus on internal bioadhesives, the criteria of an ideal internal

  19. Medical Applications and Toxicities of Gallium Compounds

    Directory of Open Access Journals (Sweden)

    Christopher R. Chitambar

    2010-05-01

    Full Text Available Over the past two to three decades, gallium compounds have gained importance in the fields of medicine and electronics. In clinical medicine, radioactive gallium and stable gallium nitrate are used as diagnostic and therapeutic agents in cancer and disorders of calcium and bone metabolism. In addition, gallium compounds have displayed anti-inflammatory and immunosuppressive activity in animal models of human disease while more recent studies have shown that gallium compounds may function as antimicrobial agents against certain pathogens. In a totally different realm, the chemical properties of gallium arsenide have led to its use in the semiconductor industry. Gallium compounds, whether used medically or in the electronics field, have toxicities. Patients receiving gallium nitrate for the treatment of various diseases may benefit from such therapy, but knowledge of the therapeutic index of this drug is necessary to avoid clinical toxicities. Animals exposed to gallium arsenide display toxicities in certain organ systems suggesting that environmental risks may exist for individuals exposed to this compound in the workplace. Although the arsenic moiety of gallium arsenide appears to be mainly responsible for its pulmonary toxicity, gallium may contribute to some of the detrimental effects in other organs. The use of older and newer gallium compounds in clinical medicine may be advanced by a better understanding of their mechanisms of action, drug resistance, pharmacology, and side-effects. This review will discuss the medical applications of gallium and its mechanisms of action, the newer gallium compounds and future directions for development, and the toxicities of gallium compounds in current use.

  20. A study of RFID application impacts on medical safety.

    Science.gov (United States)

    Chang, She-I; Ou, Chin-Shyh; Ku, Cheng-Yuan; Yang, Morris

    2008-01-01

    With the international reform in medical management systems gaining ground worldwide, hospital management has gradually begun to shift its focus from providing expensive medical treatment to improving medical service quality and patient safety. In this study, we discuss the application of Radio Frequency Identification (RFID) and data integrating technology with the medical service, and examine whether or not this technology can enhance medical safety. We also discuss the possible benefits following the application of the RFID system. The findings show that the application of RFID to hospitals can actually generate benefits, which can be further divided into operational structure benefits, users' structure benefits, and organisational and environmental benefits. However, not all these benefits can achieve medical safety. Among them, only the operator and environmental benefits can play such roles. Nevertheless, the application of RFID can bring hospitals towards the integration of technology benefits and improved medical safety.

  1. Radioisotope Production for Medical and Physics Applications

    Science.gov (United States)

    Mausner, Leonard

    2012-10-01

    Radioisotopes are critical to the science and technology base of the US. Discoveries and applications made as a result of the availability of radioisotopes span widely from medicine, biology, physics, chemistry and homeland security. The clinical use of radioisotopes for medical diagnosis is the largest sector of use, with about 16 million procedures a year in the US. The use of ^99Mo/^99mTc generator and ^18F make up the majority, but ^201Tl, ^123I, ^111In, and ^67Ga are also used routinely to perform imaging of organ function. Application of radioisotopes for therapy is dominated by use of ^131I for thyroid malignancies, ^90Y for some solid tumors, and ^89Sr for bone cancer, but production of several more exotic species such as ^225Ac and ^211At are of significant current research interest. In physics ^225Ra is of interest for CP violation studies, and the actinides ^242Am, ^249Bk, and ^254Es are needed as targets for experiments to create superheavy elements. Large amounts of ^252Cf are needed as a fission source for the CARIBU experiment at ANL. The process of radioisotope production is multidisciplinary. Nuclear physics input based on nuclear reaction excitation function data is needed to choose an optimum target/projectile in order to maximize desired isotope production and minimize unwanted byproducts. Mechanical engineering is needed to address issues of target heating, induced mechanical stress and material compatibility of target and claddings. Radiochemists are involved as well since chemical separation to purify the desired final radioisotope product from the bulk target and impurities is also usually necessary. Most neutron rich species are produced at a few government and university reactors. Other radioisotopes are produced in cyclotrons in the commercial sector, university/hospital based facilities, and larger devices at the DOE labs. The landscape of US facilities, the techniques involved, and current supply challenges will be reviewed.

  2. Triplex DNA: Importance and its medical application

    Directory of Open Access Journals (Sweden)

    Noori Dalooei M

    1998-07-01

    Full Text Available Back in 1957, when investigators produced a triple-stranded form of DNA while studying synthetic nucleic acids, few researchers paid much attention to the discovery. However, triplex DNA was never entirely forgotton and especially since 1987 its structural and functional importance in biological systems as well as its medical applications and therapeutic potentional have been extensively studied. It was suggested that in triplex DNA, the third strand was hydrogen bonded and positioned in the major groove of the Watson-Crick duplex. Protein binding assays show that triplex formation by HR21ap inhibits Sp1 binding to the Ha-ras promoter. These results suggest that the triplex formation by the Ha-ras promoter targed oligonucleotide may provide a means to specifically inhibit transcription of this oncogene in vivo. Triplex DNA can disrupt gene transcriptions and can be used as of this oncogene in vivo. Triplex DNA can disrupt gene transcriptions and can be used as a new strategy for treating viral diseases, such as AIDS, by blocking virus reproduction. As discussed in this article, for a number of reasons, interest in oligonucleotide designed for triplex helices on dsDNA is being steadily increased (including their potential artificial repressors of gene expression, mediator of site specific DNA cleavage and therapeutic use for genetic diseases, cancer and diseases caused by viruses.

  3. Review of CdTe medical applications

    Energy Technology Data Exchange (ETDEWEB)

    Entine, G; Garcia, D A; Tow, D E

    1977-02-01

    CdTe sensors are now being used in several areas of nuclear medicine. CdTe probe technics, originally developed to study dental pathology in dog models, are being used clinically to diagnose venous thrombosis of the legs and to detect occult dental infections in patients scheduled for prosthetic cardiovascular and orthopedic surgery. Similar instrumentation is in use in animal research of myocardial infarction and synthetic tooth substitutes. Transmission technics have also been developed to diagnose pulmonary edema and to measure bone mineral changes in space flight. Investigations are also underway in the use of linear or two-dimensional arrays of CdTe gamma sensors for medical imaging. Economic considerations have slowed this work, but the technology appears to be available. Development of photoconductive CdTe X-ray detectors for scintigraphic scanners has also begun. Rapid detector improvement will be needed for success in this field, but the potential usefulness is very great. Together, the present application results are encouraging and wide use of CdTe detectors should occur within only a few years.

  4. An Evaluation of Free Medical Applications for Android Smartphones

    Directory of Open Access Journals (Sweden)

    Roxana D. CAPRAŞ

    2016-12-01

    Full Text Available ntroduction: The field of healthcare applications (apps currently holds potential to improve the daily medical practice by implementing evidence-based healthcare tools. The purpose of this study was to describe the main characteristics of Android-based healthcare applications available in Google Play and to identify those applications that are evidence-based. Methods: The study was undertaken between the 1st of July and the 30th of August 2016. An evaluation form was developed to characterize the healthcare apps available in Google Play retrieved for the following keywords: (medical apps and (evidence based medical apps respectively. Only the free apps were considered eligible for the purpose of our study. Besides the general characteristics, several criteria with regards to interactivity, functionality, esthetics, contents, benefits, as well as evidence-based aspects were considered. Results: A number of 147 healthcare apps were displayed based on the used keywords and were included in the analysis. 42 of them were excluded due to the need for payment, malfunction after installation or games/animations that used medical terms. The remaining 105 apps were then analyzed by the evaluation criteria established in the research protocol. This study shows that until this point, mobile medical applications are mostly designed for consumers or medical students and less for medical professionals. 2 medical application include evidence based medical information and 19 applications were developed in this direction. The majority of the applications were developed in USA. 60% of the analyzed applications have the capacity of improving the quality of medical care. Conclusions: We found only 2 "ideal" mobile medical applications that brought together all the requirements that every application designed for medical use should fulfill.

  5. Design Investigation on Applicable Mesh Structures for Medical Stent Applications

    Science.gov (United States)

    Asano, Shoji; He, Jianmei

    2017-11-01

    In recent years, utilization of medical stents is one of effective treatments for stenosis and occlusion occurring in a living body’s lumen indispensable for maintenance of human life such as superficial femoral artery (SFA) occlusion. However, there are concerns about the occurrence of fatigue fractures caused by stress concentrations, neointimal hyperplasia and the like due to the shape structure and the manufacturing method in the conventional stents, and a stent having high strength and high flexibility is required. Therefore, in this research, applicable mesh structures for medical stents based on the design concepts of high strength, high flexibility are interested to solve various problem of conventional stent. According to the shape and dimensions of SFA occlusion therapy stent and indwelling delivery catheter, shape design of the meshed stent are performed using 3-dimensional CAD software Solid Works first. Then analytical examination on storage characteristics and compression characteristics of such mesh structure applied stent models were carried out through finite element analysis software ANSYS Workbench. Meshed stent models with higher strength and higher flexibility with integral molding are investigated analytically. It was found that the storage characteristics and compression characteristics of meshed stent modles are highly dependent on the basic mesh shapes with same surface void ratio. Trade-off relationship between flexibility and storage characteristics is found exited, it is required to provide appropriate curvatures during basic mesh shape design.

  6. A special designed library for medical imaging applications

    International Nuclear Information System (INIS)

    Lymberopoulos, D.; Kotsopoulos, S.; Zoupas, V.; Yoldassis, N.; Spyropoulos, C.

    1994-01-01

    The present paper deals with a sophisticated and flexible library of medical purpose image processing routines. It contains modules for simple as well as advanced gray or colour image processing. This library offers powerful features for medical image processing and analysis applications, thus providing the physician with a means of analyzing and estimating medical images in order to accomplish their diagnostic procedures

  7. 78 FR 29390 - Applications; SHINE Medical Technologies, Inc.

    Science.gov (United States)

    2013-05-20

    ... NUCLEAR REGULATORY COMMISSION [Proj-0792; NRC-2013-0053] Applications; SHINE Medical Technologies... (ADAMS) Accession No. ML13088A192), SHINE Medical Technologies (SHINE) filed with the U.S. Nuclear... for a medical radioisotope production facility in Janesville, Wisconsin. An exemption from certain...

  8. Quality assurance in medical radiation applications. The medical and dental appointment

    International Nuclear Information System (INIS)

    Ernst-Elz, Andreas

    2017-01-01

    Medical radiation applications cause averaged over the German population an annual exposure of almost 2 mSv. Medical authorities have the assignment to assure and control the diagnostic and therapeutic quality of these applications and to provide recommendations for operators with respect to dose reductions and radiation protection, including guidance for radiotherapy planning aimed to questions of dose and therapy optimization.

  9. Nuclear energy and its medical application

    International Nuclear Information System (INIS)

    Jain, S.K.

    2010-01-01

    Ionising radiation is used in radiotherapy to treat cancer and to sterilise medical equipment because it destroys cells. Radioactive tracers are used in nuclear medicine because the ionising radiation it emits is easy to detect. There are three main uses of ionising radiation in medicine: treatment, diagnosis and sterilisation. Radiotherapy is used to treat cancers by irradiating them with ionising radiation. Radioactive tracers are used to diagnose and investigate several medical conditions. Ionising radiation is used to sterilise medical equipment as it kills germs and/or bacteria

  10. Light ion linacs for medical applications

    International Nuclear Information System (INIS)

    Bradbury, J.N.; Knapp, E.A.; Nagle, D.E.

    1975-01-01

    Recent advances in linear accelerator technology point to the feasibility of designing and developing practical medical linacs for producing protons, neutrons, or π mesons for the radiation therapy of cancer. Additional uses of such linacs could include radioisotope production and charged particle radiography. For widespread utilization medical linacs must exhibit reasonable cost, compactness, reliability, and simplicity of operation. Possible extensions of current accelerator technology which might provide these characteristics are discussed in connection with linac design, fabrication techniques, materials, power sources, injectors, and particle collection and delivery systems. Parameters for a medical proton linac for producing pions are listed. (U.S.)

  11. Brain-Computer Interfaces : Beyond Medical Applications

    NARCIS (Netherlands)

    Erp, J.B.F. van; Lotte, F.; Tangermann, M.

    2012-01-01

    Brain-computer interaction has already moved from assistive care to applications such as gaming. Improvements in usability, hardware, signal processing, and system integration should yield applications in other nonmedical areas.

  12. Application of stereo-imaging technology to medical field.

    Science.gov (United States)

    Nam, Kyoung Won; Park, Jeongyun; Kim, In Young; Kim, Kwang Gi

    2012-09-01

    There has been continuous development in the area of stereoscopic medical imaging devices, and many stereoscopic imaging devices have been realized and applied in the medical field. In this article, we review past and current trends pertaining to the application stereo-imaging technologies in the medical field. We describe the basic principles of stereo vision and visual issues related to it, including visual discomfort, binocular disparities, vergence-accommodation mismatch, and visual fatigue. We also present a brief history of medical applications of stereo-imaging techniques, examples of recently developed stereoscopic medical devices, and patent application trends as they pertain to stereo-imaging medical devices. Three-dimensional (3D) stereo-imaging technology can provide more realistic depth perception to the viewer than conventional two-dimensional imaging technology. Therefore, it allows for a more accurate understanding and analysis of the morphology of an object. Based on these advantages, the significance of stereoscopic imaging in the medical field increases in accordance with the increase in the number of laparoscopic surgeries, and stereo-imaging technology plays a key role in the diagnoses of the detailed morphologies of small biological specimens. The application of 3D stereo-imaging technology to the medical field will help improve surgical accuracy, reduce operation times, and enhance patient safety. Therefore, it is important to develop more enhanced stereoscopic medical devices.

  13. Application of accelerator in the medical aspects

    International Nuclear Information System (INIS)

    Shi Lisheng; Wang Bairong; Yang Zhongping

    2014-01-01

    In recent years, the human life span compared with before there is an obvious increase in. With the extension of life, cancer incidence is increasing, at the same time, the diagnosis and treatment of cancer has been the development of. Based on the review of the past and present situation of diagnosis and treatment of cancer, the accelerator and the future to introduce, divided into the accelerator treatment, cancer diagnosis, accelerator accelerator with radioactive isotopes, medical accelerator conditions and medical accelerator built five content. (authors)

  14. Medical Applications of Remote Electronic Browsing.

    Science.gov (United States)

    Chadwick, Joseph

    The purposes of this study are to identify and define viable remote browsing techniques and the requirements for an interactive medical information system that would permit the use of such techniques. The main emphasis is in the areas of: (1) remote viewing of page material; and (2) remote interrogation of fact banks with question-answering…

  15. Medical technology management: from planning to application.

    Science.gov (United States)

    David, Y; Jahnke, E

    2005-01-01

    Appropriate deployment of technological innovation contributes to improvement in the quality of healthcare delivered, the containment of cost, and access to the healthcare system. Hospitals have been allocating a significant portion of their resources to procuring and managing capital assets; they are continuously faced with demands for new medical equipment and are asked to manage existing inventory for which they are not well prepared. To objectively manage their investment, hospitals are developing medical technology management programs that need pertinent information and planning methodology for integrating new equipment into existing operations as well as for optimizing costs of ownership of all equipment. Clinical engineers can identify technological solutions based on the matching of new medical equipment with hospital's objectives. They can review their institution's overall technological position, determine strengths and weaknesses, develop equipment-selection criteria, supervise installations, train users and monitor post procurement performance to assure meeting of goals. This program, together with cost accounting analysis, will objectively guide the capital assets decision-making process. Cost accounting analysis is a multivariate function that includes determining the amount, based upon a strategic plan and financial resources, of funding to be allocated annually for medical equipment acquisition and replacement. Often this function works closely with clinical engineering to establish equipment useful life and prioritization of acquisition, upgrade, and replacement of inventory within budget confines and without conducting time consuming, individual financial capital project evaluations.

  16. Rapid molecular biosensing for medical applications

    NARCIS (Netherlands)

    Prins, M.W.J.

    2015-01-01

    An important challenge in today’s societies is that life expectancy and the prevalence of chronic conditions are increasing. This puts pressure on the healthcare system and raises a demand for easy to use and cost-effective medical technologies in order to manage chronic conditions outside large

  17. Biomedical hydrogels biochemistry, manufacture and medical applications

    CERN Document Server

    Rimmer, Steve

    2011-01-01

    Hydrogels are very important for biomedical applications because they can be chemically manipulated to alter and control the hydrogel's interaction with cells and tissues. Their flexibility and high water content is similar to that of natural tissue, making them extremely suitable for biomaterials applications. Biomedical hydrogels explores the diverse range and use of hydrogels, focusing on processing methods and novel applications in the field of implants and prostheses. Part one of this book concentrates on the processing of hydrogels, covering hydrogel swelling behaviour, superabsorbent cellulose-based hydrogels and regulation of novel hydrogel products, as well as chapters focusing on the structure and properties of hydrogels and different fabrication technologies. Part two covers existing and novel applications of hydrogels, including chapters on spinal disc and cartilage replacement implants, hydrogels for ophthalmic prostheses and hydrogels for wound healing applications. The role of hydrogels in imag...

  18. A special designed library for medical imaging applications

    Energy Technology Data Exchange (ETDEWEB)

    Lymberopoulos, D; Kotsopoulos, S; Zoupas, V; Yoldassis, N [Departmeent of Electrical Engineering, University of Patras, Patras 26 110 Greece (Greece); Spyropoulos, C [School of Medicine, Regional University Hospital, University of Patras, Patras 26 110 Greece (Greece)

    1994-12-31

    The present paper deals with a sophisticated and flexible library of medical purpose image processing routines. It contains modules for simple as well as advanced gray or colour image processing. This library offers powerful features for medical image processing and analysis applications, thus providing the physician with a means of analyzing and estimating medical images in order to accomplish their diagnostic procedures. 6 refs, 1 figs.

  19. Procedures for the medical application of research reactors (Appendix)

    International Nuclear Information System (INIS)

    Nishihara, H.; Kanda, K.

    2004-01-01

    The Kyoto University Reactor (KUR) is one of the four research reactors in Japan that are currently licensed for medical application, in addition to other research purposes. Taking the KUR as an example, legal and other procedures for using research reactors for boron neutron capture therapy (BNCT) are described, which are practiced in accordance with the 'Provisional Guideline Pertaining to Medical Irradiation by Accelerators and/or Reactors, other than defined by the Medical Service Act' of the Science Council of Japan

  20. An H-module linear actuator for medical equipment applications

    DEFF Research Database (Denmark)

    Liu, Xiao; Wu, Keyuan; ye, yunyue

    2012-01-01

    An H-module linear actuator (HMLA) is proposed in this paper for medical equipment applications. Compared to the existing linear actuators used in medical equipment, the proposed H-module linear actuator has much lower normal force, which makes use of an additional air-suspension system unnecessary...

  1. Neural networks: Application to medical imaging

    Science.gov (United States)

    Clarke, Laurence P.

    1994-01-01

    The research mission is the development of computer assisted diagnostic (CAD) methods for improved diagnosis of medical images including digital x-ray sensors and tomographic imaging modalities. The CAD algorithms include advanced methods for adaptive nonlinear filters for image noise suppression, hybrid wavelet methods for feature segmentation and enhancement, and high convergence neural networks for feature detection and VLSI implementation of neural networks for real time analysis. Other missions include (1) implementation of CAD methods on hospital based picture archiving computer systems (PACS) and information networks for central and remote diagnosis and (2) collaboration with defense and medical industry, NASA, and federal laboratories in the area of dual use technology conversion from defense or aerospace to medicine.

  2. Medical Engineering and Microneurosurgery: Application and Future.

    Science.gov (United States)

    Morita, Akio; Sora, Shigeo; Nakatomi, Hirofumi; Harada, Kanako; Sugita, Naohiko; Saito, Nobuhito; Mitsuishi, Mamoru

    2016-10-15

    Robotics and medical engineering can convert traditional surgery into digital and scientific procedures. Here, we describe our work to develop microsurgical robotic systems and apply engineering technology to assess microsurgical skills. With the collaboration of neurosurgeons and an engineering team, we have developed two types of microsurgical robotic systems. The first, the deep surgical systems, enable delicate surgical procedures such as vessel suturing in a deep and narrow space. The second type allows for super-fine surgical procedures such as anastomosing artificial vessels of 0.3 mm in diameter. Both systems are constructed with master and slave manipulator robots connected to local area networks. Robotic systems allowed for secure and accurate procedures in a deep surgical field. In cadaveric models, these systems showed a good potential of being useful in actual human surgeries, but mechanical refinements in thickness and durability are necessary for them to be established as clinical systems. The super-fine robotic system made the very intricate surgery possible and will be applied in clinical trials. Another trial included the digitization of surgical technique and scientific analysis of surgical skills. Robotic and human hand motions were analyzed in numerical fashion as we tried to define surgical skillfulness in a digital format. Engineered skill assessment is also feasible and should be useful for microsurgical training. Robotics and medical engineering should bring science into the surgical field and training of surgeons. Active collaboration between medical and engineering teams and academic and industry groups is mandatory to establish such medical systems to improve patient care.

  3. Medical applications of the nuclear energy

    International Nuclear Information System (INIS)

    Ugarte, Valentin E.

    2001-01-01

    The Nuclear Medicine School Foundation, in Mendoza (Argentina) was created in 1986 by the National Atomic Energy Commission (CNEA) and is supported by the Government of the Mendoza Province, the CNEA, and the National University of Cuyo. The main activities of the school are medical diagnosis using nuclear techniques and the training of physicians and technicians in nuclear medicine. Teletherapy and brachytherapy are also performed. The use of the PET is described in some detail

  4. 15 CFR Notes Applicable to State... - Notes applicable to State of Understanding related to Medical Equipment:

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Notes applicable to State of Understanding related to Medical Equipment: applicable Notes applicable to State of Understanding related to Medical Equipment: Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY,...

  5. Medical applications of synchrotron radiation. Ch. 10

    International Nuclear Information System (INIS)

    Giacomini, J.C.; Gordon, H.J.

    1991-01-01

    Synchrotron radiation has a number of properties which make it uniquely suited for medical diagnostic imaging. The radiation is intense and can be readily monochromatized. With these highly intense, mono-chromatized X-ray beams, iodine K-edge di-chromatography can yield images which greatly enhance the visualization of iodine containing structures. As this technology continues to improve, the possibility of performing diagnostic cardiac, neuroradiological, and other vascular examinations with minimally invasive peripheral venous injections of iodinated contrast agent becomes increasingly practical. (author). 10 refs.; 6 figs

  6. Medical applications of synchrotron radiation in Australia

    International Nuclear Information System (INIS)

    Lewis, R.A.

    2005-01-01

    The Australian synchrotron is being built at Monash University near Melbourne. The 3 GeV machine is well-suited to the mid X-ray region and will have nine beamlines in its initial phase. The high level of biomedical research in Australia has led to the demand for a beamline capable of supporting medical research in both imaging and therapy. The design features for a versatile imaging and hard X-ray beamline capable of operating in the energy range 10-120 keV are outlined here together with a short review of some of the science that is envisaged

  7. Viewpoints on Medical Image Processing: From Science to Application.

    Science.gov (United States)

    Deserno Né Lehmann, Thomas M; Handels, Heinz; Maier-Hein Né Fritzsche, Klaus H; Mersmann, Sven; Palm, Christoph; Tolxdorff, Thomas; Wagenknecht, Gudrun; Wittenberg, Thomas

    2013-05-01

    Medical image processing provides core innovation for medical imaging. This paper is focused on recent developments from science to applications analyzing the past fifteen years of history of the proceedings of the German annual meeting on medical image processing (BVM). Furthermore, some members of the program committee present their personal points of views: (i) multi-modality for imaging and diagnosis, (ii) analysis of diffusion-weighted imaging, (iii) model-based image analysis, (iv) registration of section images, (v) from images to information in digital endoscopy, and (vi) virtual reality and robotics. Medical imaging and medical image computing is seen as field of rapid development with clear trends to integrated applications in diagnostics, treatment planning and treatment.

  8. Viewpoints on Medical Image Processing: From Science to Application

    Science.gov (United States)

    Deserno (né Lehmann), Thomas M.; Handels, Heinz; Maier-Hein (né Fritzsche), Klaus H.; Mersmann, Sven; Palm, Christoph; Tolxdorff, Thomas; Wagenknecht, Gudrun; Wittenberg, Thomas

    2013-01-01

    Medical image processing provides core innovation for medical imaging. This paper is focused on recent developments from science to applications analyzing the past fifteen years of history of the proceedings of the German annual meeting on medical image processing (BVM). Furthermore, some members of the program committee present their personal points of views: (i) multi-modality for imaging and diagnosis, (ii) analysis of diffusion-weighted imaging, (iii) model-based image analysis, (iv) registration of section images, (v) from images to information in digital endoscopy, and (vi) virtual reality and robotics. Medical imaging and medical image computing is seen as field of rapid development with clear trends to integrated applications in diagnostics, treatment planning and treatment. PMID:24078804

  9. Medical and industrial application of radiation

    International Nuclear Information System (INIS)

    Ajayi, I.R.

    1999-01-01

    While dosimetry is not a radiation application, accurate dosage of radiation of utmost importance for all radiation applications. For both therapeutic and industrial applications it can be matter of life and death. For this reason, great efforts have been made to ensure that radiation dosages given to patients and used in all industrial applications are as near as possible to those prescribed. The World Health Organization (WHO) and the IAEA, together with many National Standard Laboratories and with the International Bureau of Weight and Measures, have been very active and successful during the last 20 years in ascertaining that normal cobalt-60 therapy unit. For this purpose, 63 Secondary Standard Dosimetry Laboratories have been established of which more than half are in developing countries. FRPS houses one of the Secondary Standard Dosimetry Laboratories. As accurate dosimetry is a prerequisite in radiotherapy, so it is in industrial exposures and all laboratories responsible for dosimetry have to make frequent intercomparisons with one of the Primary Standard Dosimetry Laboratories. The SSDL at FRPS hopes to commence this as soon as our new Harshaw 6600 TLD reader arrives. This has already been approved by the IAEA. Much high doses of radiation are used for some industrial applications, as discussed in a previous lecture, such as sterilization of rubber, and food preservation and newly developed techniques are being used for the assurance of the prescribed dose. IAEA provides assistance in this area also through the secondary standard dosimetry laboratories. The IAEA has a broad programme of assistance which includes the calibration of all instruments in the laboratories of the participants, be it for radiation protection, or high dose measurements

  10. 76 FR 50231 - Mobile Medical Applications Draft Guidance; Public Workshop

    Science.gov (United States)

    2011-08-12

    ... workshop discussion, a ``mobile medical app'' is a mobile application that meets the definition of ``device... applications are subject to regulation as devices when they meet the definition of a device in section 201(h... man * * * '' or ``* * * intended to affect the structure or any function of the body of man or other...

  11. Medical cyclotron basic concepts and its applications

    International Nuclear Information System (INIS)

    Kumar, Rajeev; Sonkawade, R.G.

    2012-01-01

    More than 3000 nuclides are known, of which approximately 2700 are radioactive, and rest are stable. The majority of radionuclides are artificially produced in the reactor and cyclotron. In a cyclotron, Charge particle such as proton, Deuteron, á (Alpha) particle, 3 He particles and so forth are accelerated in circular paths within the Dees under vacuum by means of an electromagnetic field. These accelerated particles can possess few KeV to several BeV of kinetic energy depending on the design of the cyclotron. At our setup we have an 11 MeV dual beam multi target cyclotron which is capable producing 11 C, 13 N, 15 O, 18 F and 2 F radioisotopes and all have been successfully produced and tested in our lab. Earlier cyclotrons were the best source of high-energy beams for nuclear physics experiments; several cyclotrons are still in use for this type of research. Cyclotrons can be used to treat cancer. Ion beams from cyclotrons can be used, as in proton therapy. The positron emitting isotopes are suitable for PET imaging. As discussed we are producing mainly Carbon-11, Nitrogen-13, Oxygen-15, and Fluorine-18: These are positron emitters used in PET for studying brain physiology and pathology, in particular for localizing epileptic focus, and in dementia, psychiatry and neuropharmacology studies. So these are having significant role in diagnosis of Oncological, Neurological and Cardiological disorder. More than ninety percent we are producing 18 F in FDG. 18 F in FDG (Flouro-Deoxy-glucose) has become very important in detection of cancers and the monitoring of progress in their treatment, using PET. Medical cyclotron is complex equipment requiring delicate handling by highly trained personnel. The aim of this article is to highlight few finer aspects of Medical cyclotron operation, including precautions for safety and smooth functioning of this sophisticated equipment. (author)

  12. Application state of radioisotopes for medical use

    International Nuclear Information System (INIS)

    Nakajima, Tomoyoshi

    1979-01-01

    Application of unsealed radioisotopes as radiopharmaceuticals has been increasing year by year with the development of nuclear medicine. As for the radioisotopes for in vivo use which are internally administered and are detected by external scanning, the consumption of Tc-99 m drugs has increased rapidly. The sales of radiopharmaceuticals for in vivo use including 131 I, etc. amounted to four billion Yen in 1977. The consumption of the isotopes used in vitro for radioimmunoassay has made more rapid increase, and the sales of radiopharmaceuticals for in vitro use amounted to seven billion Yen in 1977. Radiopharmaceuticals have been used in 1,134 institutes all over Japan in 1978. 534 among them have applied radiopharmaceuticals to both in vivo and in vitro uses. Radioactive wastes have been increasing with the application of these unsealed radiopharmaceuticals, and their disposal method should be examined as there is a limit in their storage. (Kobatake, H.)

  13. CT applications of medical computer graphics

    International Nuclear Information System (INIS)

    Rhodes, M.L.

    1985-01-01

    Few applications of computer graphics show as much promise and early success as that for CT. Unlike electron microscopy, ultrasound, business, military, and animation applications, CT image data are inherently digital. CT pictures can be processed directly by programs well established in the fields of computer graphics and digital image processing. Methods for reformatting digital pictures, enhancing structure shape, reducing image noise, and rendering three-dimensional (3D) scenes of anatomic structures have all become routine at many CT centers. In this chapter, the authors provide a brief introduction to computer graphics terms and techniques commonly applied to CT pictures and, when appropriate, to those showing promise for magnetic resonance images. Topics discussed here are image-processing options that are applied to digital images already constructed. In the final portion of this chapter techniques for ''slicing'' CT image data are presented, and geometric principles that describe the specification of oblique and curved images are outlined. Clinical examples are included

  14. Application of proton radiography to medical imaging

    International Nuclear Information System (INIS)

    Kramer, S.L.; Martin, R.L.; Moffett, D.R.; Colton, E.

    1977-12-01

    The use of charged particles for radiographic applications has been considered for some time, but progress has been impeded by the cost and availability of suitable accelerators. However, recent developments in technology could overcome these problems. A review is presented of the physical principles leading to an improvement in mass resolution per unit of absorbed dose for charged particle radiography relative to x-ray radiography. The quantitative comparisons between x-ray and proton radiographs presented here confirm this advantage. The implications of proton radiography on cancer detection, as well as future plans for developing a proton tomographic system, are discussed

  15. Anticholinesterases: Medical applications of neurochemical principles

    Energy Technology Data Exchange (ETDEWEB)

    Millard, C.B.; Broomfield, C.A.

    1995-12-31

    Cholinesterases form a family of serine esterases that arise in animals from at least two distinct genes. Multiple forms of these enzymes can be precisely localized and regulated by alternative mRNA splicing and by co- or posttranslational modifications. The high catalytic efficiency of the cholinesterases is quelled by certain very selective reversible and irreversible inhibitors. Owing largely to the important role of acetylcholine hydrolysis in neurotransmission, cholinesterase and its inhibitors have been studied extensively in vivo. In parallel, there has emerged an equally impressive enzyme chemistry literature. Cholinesterase inhibitors are used widely as pesticides; in this regard the compounds are beneficial with concomitant health risks. Poisoning by such compounds can result in an acute but usually manageable medical crisis and may damage the ONS and the PNS, as well as cardiac and skeletal muscle tissue. Some inhibitors have been useful for the treatment of glaucoma and myasthenia gravis, and others are in clinical trials as therapy for Alzheimer`s dementia. Concurrently, the most potent inhibitors have been developed as highly toxic chemical warfare agents. We review treatments and sequelae of exposure to selected anticholinesterases, especially organophosphorus compounds and carbamates, as they relate to recent progress in enzyme chemistry.

  16. Unjustified prenatal radiation exposure in medical applications

    International Nuclear Information System (INIS)

    Cardenas Herrera, J.; Lamadrid, A.I.; Garcia Lima, O.; Diaz Bernal, E.; Freixas, V.; Lopez Bejerano, G.; Sanchez, R.

    2001-01-01

    The exposure to the radiation ionising of pregnant women, frequently constitutes motive of preoccupation for the expectant mother and the medical professionals taken the responsibility with its attention. The protection of the embryo-fetus against the ionising radiation is of singular importance due to its special vulnerability to this agent. On the other hand the diagnosis or treatment with radiations ionising beneficial for the expectant mother, are only indirectly for the embryo-fetus that is exposed to a hazard without perceiving anything. The present paper presents the experience obtained in the clinical and dosimetric evaluation from twenty-one pregnant patients subjected to diverse radiodiagnostic procedures or nuclear medicine during the years 1999-2000. The obtained results evidence that 24% of the patients was subjected to procedures of nuclear medicine with diagnostic purposes. While the period of pregnancy of the patients ranged between 4 and 12 weeks, it could be concluded that in all the cases the doses received by the patients in the whole body did not exceed 2 mSv. When conjugating the period of pregnancy of the patients with the doses received, there is no evidence of significant risk for the embryo-fetus. Paradoxically the physicians of assistance suggested to their patients in all the cases to carry out the interruption of the pregnancy, demonstrating with this decision ignorance on the biological effects of the ionizing radiations during the prenatal exposures. (author)

  17. Production of Thallium 201 for medical applications

    International Nuclear Information System (INIS)

    Braghirolli, A.M.S.

    1981-12-01

    With the purpose of producing high purity carrier-free 201 Tl, for medical use, a production and separation method was developed using the CV-28 Cyclotron of the Nuclear Engineering Institute in Rio de Janeiro, Brazil. 201 Pb was produced by 24 MeV proton bombardment of natural Tl and allowed to decay to 201 Tl. In the separation process the target is dissolved in HNO 3 , the 201 Pb produced is separated by Fe(OH) 3 coprecipitation, and the Fe is latter separated by anion exchange. The 201 Pb is permited to decay during 32 hrs. 201 Tl is then separated from remaining Pb by anion exchange. The chemical separation is done in a remote processing cell using manipulators, tongs, electric and pneumatic systems. The thick target yield of 201 Pb is 1.7 mCi/μAhr. At the moment the production is restricted to 4 mCi of 201 Tl for each irradiation. (Author) [pt

  18. Structured alkali halides for medical applications

    International Nuclear Information System (INIS)

    Schmitt, B.; Fuchs, M.; Hell, E.; Knuepfer, W.; Hackenschmied, P.; Winnacker, A.

    2002-01-01

    Image plates based on storage phosphors are a major application of radiation defects in insulators. Storage phosphors absorb X-ray quanta creating trapped electron-hole pairs in the material. Optical stimulation of the electron causes recombination leading to light emission. Application of image plates requires an optimal compromise between resolution (represented by the modulation transfer function (MTF)) and sensitivity. In our paper we present a new solution of the problem of combining a high MTF with a high sensitivity by structuring the image plates in form of thin needles acting as light guides. This suppresses the lateral spread of light which is detrimental to resolution. As doped CsBr, e.g. CsBr:Ga [Physica Medica XV (1999) 301], can pose a good storage phosphor evaporated layers are of interest in computed radiography. Needle structured CsI:Tl is used as scintillator in direct radiography [IEEE Trans. Nucl. Sci. 45 (3) (1998)]. CsBr layers have been produced by evaporation in vacuum and in inert gas atmosphere varying pressure and temperature. The resulting structures are of fibrous or columnar nature being in good agreement with the zone model of Thornton [Ann. Rev. Mater. Sci. 7 (1977) 239]. A zone model for CsBr has been developed. Measurements on doped alkali halide image plates having needle structure show good MTF at high sensitivity making a significant progress in image plate technology

  19. Medical application of laser hair removal

    International Nuclear Information System (INIS)

    Fadlalla, Alwalled Hussein Ataalmannan

    2015-12-01

    The use of laser in medical treatment has become of paramount importance proportional to what has high therapeutic privileges such as speed and accuracy in penetrating tissues and high quality especially when used in hair removal which is the subject of our study, this laser operates cards may cause some change in the color of the skin when used in a manner that is correct ratio of the thermal impact force in the laser hair removal process, or if it is exposed directly to his eye. This study is a comparison between the physical properties of laser of lasers used in hair removal, according to previous studies to be the basis for the benefit of doctors who use lasers for hair removal. The aim of this study was to study the effect of laser hair removal using the Nd: YAG laser with a wavelength 1064 nm as well as the risks airing from the assessment. The aim of this study was to identify the appropriate laser energy that absorbed in the hair follicle with a dark color and the appropriate thermal effect occurs to vaporize the follicle cell, a 40 J/cm"2 is to be significant without side effects for healthy tissue. In this study doses for a few laser beam is considered when compared to previous studies. Laser danger to the patient during the operation increases with increasing laser energy emitted during treatment. Laser hair removal by the user and energy emitted by wavelength of the laser device also depends on the hair color and roughness as well as skin color. (Author)

  20. Surface pretreatments for medical application of adhesion

    Directory of Open Access Journals (Sweden)

    Weber Michael

    2003-09-01

    Full Text Available Abstract Medical implants and prostheses (artificial hips, tendono- and ligament plasties usually are multi-component systems that may be machined from one of three material classes: metals, plastics and ceramics. Typically, the body-sided bonding element is bone. The purpose of this contribution is to describe developments carried out to optimize the techniques , connecting prosthesis to bone, to be joined by an adhesive bone cement at their interface. Although bonding of organic polymers to inorganic or organic surfaces and to bone has a long history, there remains a serious obstacle in realizing long-term high-bonding strengths in the in vivo body environment of ever present high humidity. Therefore, different pretreatments, individually adapted to the actual combination of materials, are needed to assure long term adhesive strength and stability against hydrolysis. This pretreatment for metal alloys may be silica layering; for PE-plastics, a specific plasma activation; and for bone, amphiphilic layering systems such that the hydrophilic properties of bone become better adapted to the hydrophobic properties of the bone cement. Amphiphilic layering systems are related to those developed in dentistry for dentine bonding. Specific pretreatment can significantly increase bond strengths, particularly after long term immersion in water under conditions similar to those in the human body. The bond strength between bone and plastic for example can be increased by a factor approaching 50 (pealing work increasing from 30 N/m to 1500 N/m. This review article summarizes the multi-disciplined subject of adhesion and adhesives, considering the technology involved in the formation and mechanical performance of adhesives joints inside the human body.

  1. Some arachnidan peptides with potential medical application

    Directory of Open Access Journals (Sweden)

    ME De Lima

    2010-01-01

    Full Text Available The search for new active drugs that can alleviate or cure different diseases is a constant challenge to researchers in the biological area and to the pharmaceutical industry. Historically, research has focused on the study of substances from plants. More recently, however, animal venoms have been attracting attention and studies have been successful in addressing treatment of accidents. Furthermore, venoms and their toxins have been considered good tools for prospecting for new active drugs or models for new therapeutic drugs. In this review, we discuss some possibilities of using different toxins, especially those from arachnid venoms, which have shown some potential application in diseases involving pain, hypertension, epilepsy and erectile dysfunction. A new generation of drugs is likely to emerge from peptides, including those found in animal venoms.

  2. Applications of computational tools in biosciences and medical engineering

    CERN Document Server

    Altenbach, Holm

    2015-01-01

     This book presents the latest developments and applications of computational tools related to the biosciences and medical engineering. It also reports the findings of different multi-disciplinary research projects, for example, from the areas of scaffolds and synthetic bones, implants and medical devices, and medical materials. It is also shown that the application of computational tools often requires mathematical and experimental methods. Computational tools such as the finite element methods, computer-aided design and optimization as well as visualization techniques such as computed axial tomography open up completely new research fields that combine the fields of engineering and bio/medical. Nevertheless, there are still hurdles since both directions are based on quite different ways of education. Often even the “language” can vary from discipline to discipline.

  3. A clinician's artificial organ? Instant messaging applications in medical care.

    Science.gov (United States)

    Tazegul, Gokhan; Bozoglan, Humeyra; Ogut, Tahir S; Balcı, Mustafa K

    2017-09-15

    After the development of the first phone at the end of 19th century, communication technologies took a great leap forward in the 20th century. With the birth of the "smartphone" in the 21st century, communication technologies exponentially evolved and became an important part of our daily routine. Effective communications between clinicians is critical in medical care and miscommunications are a source of errors. Although telecommunication technologies have proliferated dramatically in the last decade, there is scarce evidence-based information on the use of this technology in medical care. For the purposes of medical communication, we can now consult each other about patients individually and within a group via instant messaging applications by using text messages, photos, audio messages and even videos. In this review, we examine the uses and drawbacks of instant messaging applications in medical communications.

  4. Present and perspective medical applications of microbial exopolysaccharides

    Directory of Open Access Journals (Sweden)

    Misu - Moscovici

    2015-09-01

    Full Text Available Microbial exopolysaccharides (EPS have found outstanding medical applications since the mid-twentieth century, with the first clinical trials on dextran solutions as plasma expanders. Other EPS entered medicine firstly as conventional pharmaceutical excipients (e.g., xanthan - as suspension stabilizer, or pullulan – in capsules and oral care products. Polysaccharides, initially obtained from plant or animal sources, became easily available for a wide range of applications, especially when they were commercially produced by microbial fermentation. Alginates are used as anti-reflux, dental impressions, or as matrix for tablets. Hyaluronic acid and derivatives are used in surgery, arthritis treatment or wound healing. Bacterial cellulose is applied in wound dressings or scaffolds for tissue engineering. The development of drug controlled-release systems and of micro- and nanoparticulated ones, has opened a new era of medical applications for biopolymers. EPS and their derivatives are well suited potentially non-toxic, biodegradable drug carriers. Such systems concern rating and targeting of controlled release. Their large area of applications is explained by the available manifold series of derivatives, whose useful properties can be thereby controlled. From matrix inclusion to conjugates, different systems have been designed to solubilize, and to assure stable transport in the body, target accumulation and variable rate-release of a drug substance. From controlled drug delivery, EPS potential applications expanded to vaccine adjuvants and diagnostic imaging systems. Other potential applications are related to the bioactive (immunomodulator, antitumor, antiviral characteristics of EPS. The numerous potential applications still wait to be developed into commercial pharmaceuticals and medical devices. Based on previous and recent results in important medical-pharmaceutical domains, one can undoubtedly state that EPS medical applications have a

  5. Wearable power Harvester for medical applications

    Directory of Open Access Journals (Sweden)

    Terlecka G.

    2014-01-01

    Full Text Available Intelligent biomedical clothes combine health problem prevention, comfort, convenience, entertainment and communication with fashion and make everyday life easier. Homecare and healthcare applications wireless, mobile networks and wireless sensors improve the existing monitoring capabilities especially for the elderly, children, chronically ill and also for athletes. Sensor nodes are generally battery-powered devices. Batteries add size, weight and inconvenience to portable electronic devices and require periodical replacement. Nowadays the human power is an alternative and attractive energy source. Energy, which is generated during routine and seemingly insignificant human motions, shows promise as an alternative to power embedded wireless, mobile networks and wireless sensors. This paper describes the prototype of a smart garment and offers several alternative integration places of generator's parts, which are based on the principle of operation of the electromagnetic generator. Seven variants of location are proposed, which are tested and analysed. During the research, analysis of the most optimal placement of generator's part in garment has been performed.

  6. Exploiting for medical and biological applications

    Science.gov (United States)

    Giano, Michael C.

    Biotherapeutics are an emerging class of drug composed of molecules ranging in sizes from peptides to large proteins. Due to their poor stability and mucosal membrane permeability, biotherapeutics are administered by a parenteral method (i.e., syringe, intravenous or intramuscular). Therapeutics delivered systemically often experience short half-lives. While, local administration may involve invasive surgical procedures and suffer from poor retention at the site of application. To compensate, the patient receives frequent doses of highly concentrated therapeutic. Unfortunately, the off-target side effects and discomfort associated with multiple injections results in poor patient compliance. Therefore, new delivery methods which can improve therapeutic retention, reduce the frequency of administration and may aid in decreasing the off-target side effects is a necessity. Hydrogels are a class of biomaterials that are gaining interests for tissue engineering and drug delivery applications. Hydrogel materials are defined as porous, 3-dimensional networks that are primarily composed of water. Generally, they are mechanically rigid, cytocompatible and easily chemically functionalized. Collectively, these properties make hydrogels fantastic candidates to perform as drug delivery depots. Current hydrogel delivery systems physically entrap the target therapeutic which is then subsequently released over time at the site of administration. The swelling and degradation of the material effect the diffusion of the therapy from the hydrogel, and therefore should be controlled. Although these strategies provide some regulation over therapeutic release, full control of the delivery is not achieved. Newer approaches are focused on designing hydrogels that exploit known interactions, covalently attach the therapy or respond to an external stimulus in an effort to gain improved control over the therapy's release. Unfortunately, the biotherapeutic is typically required to be chemically

  7. Applications of medical wireless LAN systems (MedLAN)

    OpenAIRE

    Banitsas, KA; Istepanian, RSH; Tachakra, S

    2002-01-01

    This is a post-peer-review, pre-copyedit version of an article published in Journal of Medical Marketing. The definitive publisher-authenticated version "Konstantinos A. Banitsas, R.S.H. Istepanian, Sapal Tachakra. Applications of medical Wireless LAN systems (MedLAN). Journal of Medical Marketing, Volume 2, Number 2, 1 January 2002 , pp. 136-142(7)" is available online at: http://www.ingentaconnect.com/content/pal/jomm/2002/00000002/00000002/art00008. In this paper the Wireless LAN (WLAN)...

  8. Graphical User Interfaces for Volume Rendering Applications in Medical Imaging

    OpenAIRE

    Lindfors, Lisa; Lindmark, Hanna

    2002-01-01

    Volume rendering applications are used in medical imaging in order to facilitate the analysis of three-dimensional image data. This study focuses on how to improve the usability of graphical user interfaces of these systems, by gathering user requirements. This is achieved by evaluations of existing systems, together with interviews and observations at clinics in Sweden that use volume rendering to some extent. The usability of the applications of today is not sufficient, according to the use...

  9. Research on medical applications of radioisotopes and radiation in Australia

    International Nuclear Information System (INIS)

    Hardy, C.J.

    1987-01-01

    The Australian Atomic Energy Commission (AAEC) produces and distributes commercially in Australia and abroad a range of radioisotopes and radiopharmaceuticals for medical applications. The AAEC carries out research and development on new and improved processes and procucts is collaboration with medical specialists in hospitals and research workers in other organisations. Examples of these processes and products are: a gel generator for production of 99m Tc; radiopharmaceuticals for diagnosis of tumours and brain disease and therapy for arthritis; 64 Cu for study of copper metabolism; and monoclonal antibodies for tumour diagnosis and therapy. New medical applications in Australia of neutron irradiation include the measurement of total body nitrogen and neutron capture in boron-labelled compounds in vivo for melanoma therapy. (author)

  10. Radioprotection in the medical applications of the ionizing radiations

    International Nuclear Information System (INIS)

    2001-01-01

    This publication presents information about of the radiological safety in the medical application of the ionizing radiation compiled in 11 chapter and 1 annex. The first four chapters are principally dedicated to technical uses in radioprotection, the external and internal irradiation and the biological radiation effects. The radioprotection principles, the individual monitoring techniques, and the radioprotection systems are developed afterwards in the followings three chapters. The second half of the document is dedicated entirely to the medical practices using ionizing radiations, specially to the radioprotection aspects in radiodiagnosis, nuclear medicine and radiotherapy. The final chapter is dedicated to radiological accidents happened worldwide in the field of the medical applications of the ionizing radiations. The annex, about of the regulatory area, established a set of standards, laws, decrees and other force regulations in radiological safety, related in radiodiagnosis, nuclear medicine and radiotherapy

  11. Multimedia Security System for Security and Medical Applications

    Science.gov (United States)

    Zhou, Yicong

    2010-01-01

    This dissertation introduces a new multimedia security system for the performance of object recognition and multimedia encryption in security and medical applications. The system embeds an enhancement and multimedia encryption process into the traditional recognition system in order to improve the efficiency and accuracy of object detection and…

  12. Medical application and its promotion of X-band linacs

    International Nuclear Information System (INIS)

    Uesaka, Mitsuru; Dobashi, Katsuhiro; Kaneyasu, Tatsuo

    2005-01-01

    This article presents the current status of the development of the monochromatic tunable hard X-ray source by the X-band linac and YAG leasers. New medical applications such as 2 colors CT and Drug Delivery System (DDS) are planned. Finally, the virtual laboratory for the distribution of the system to the society is discussed. (author)

  13. Virtual Reality in Psychological, Medical and Pedagogical Applications

    Science.gov (United States)

    Eichenberg, Christiane, Ed.

    2012-01-01

    This book has an aim to present latest applications, trends and developments of virtual reality technologies in three humanities disciplines: in medicine, psychology and pedagogy. Studies show that people in both educational as well as in the medical therapeutic range expect more and more that modern media are included in the corresponding demand…

  14. Trusted data management for Grid-based medical applications

    NARCIS (Netherlands)

    van 't Noordende, G.J.; Olabarriaga, S.D.; Koot, M.R.; de Laat, C.T.A.M.; Udoh, E.

    2011-01-01

    Existing Grid technology has been foremost designed with performance and scalability in mind. When using Grid infrastructure for medical applications, privacy and security considerations become paramount. Privacy aspects require a re-thinking of the design and implementation of common Grid

  15. Near-infrared spectroscopic tissue imaging for medical applications

    Science.gov (United States)

    Demos, Stavros [Livermore, CA; Staggs, Michael C [Tracy, CA

    2006-12-12

    Near infrared imaging using elastic light scattering and tissue autofluorescence are explored for medical applications. The approach involves imaging using cross-polarized elastic light scattering and tissue autofluorescence in the Near Infra-Red (NIR) coupled with image processing and inter-image operations to differentiate human tissue components.

  16. Integrated medication management in mHealth applications.

    Science.gov (United States)

    Ebner, Hubert; Modre-Osprian, Robert; Kastner, Peter; Schreier, Günter

    2014-01-01

    Continuous medication monitoring is essential for successful management of heart failure patients. Experiences with the recently established heart failure network HerzMobil Tirol show that medication monitoring limited to heart failure specific drugs could be insufficient, in particular for general practitioners. Additionally, some patients are confused about monitoring only part of their prescribed drugs. Sometimes medication will be changed without informing the responsible physician. As part of the upcoming Austrian electronic health record system ELGA, the eMedication system will collect prescription and dispensing data of drugs and these data will be accessible to authorized healthcare professionals on an inter-institutional level. Therefore, we propose two concepts on integrated medication management in mHealth applications that integrate ELGA eMedication and closed-loop mHealth-based telemonitoring. As a next step, we will implement these concepts and analyze--in a feasibility study--usability and practicability as well as legal aspects with respect to automatic data transfer from the ELGA eMedication service.

  17. Some advances in medical applications of low energy accelerators

    Science.gov (United States)

    Valković, V.; Moschini, G.

    1991-05-01

    Medical applications of low energy accelerators include: the use of nuclear analytical methods and procedures for laboratory studies and routine measurements; material productions and modifications to meet special requirements; radioisotope productions and their applications in radiopharmaceuticals as well as in positron emission tomography; and radiotherapy with ions, based on improved understanding of the interaction of charged particles with living tissue. Some of the recent advances in these fields are critically summarized. The plan for an improved charged particle facility in a hospital environment dedicated to applications in biology and medicine is presented.

  18. NASA technology utilization applications. [transfer of medical sciences

    Science.gov (United States)

    1973-01-01

    The work is reported from September 1972 through August 1973 by the Technology Applications Group of the Science Communication Division (SCD), formerly the Biological Sciences Communication Project (BSCP) in the Department of Medical and Public Affairs of the George Washington University. The work was supportive of many aspects of the NASA Technology Utilization program but in particular those dealing with Biomedical and Technology Application Teams, Applications Engineering projects, new technology reporting and documentation and transfer activities. Of particular interest are detailed reports on the progress of various hardware projects, and suggestions and criteria for the evaluation of candidate hardware projects. Finally some observations about the future expansion of the TU program are offered.

  19. Applications of artificial neural networks in medical science.

    Science.gov (United States)

    Patel, Jigneshkumar L; Goyal, Ramesh K

    2007-09-01

    Computer technology has been advanced tremendously and the interest has been increased for the potential use of 'Artificial Intelligence (AI)' in medicine and biological research. One of the most interesting and extensively studied branches of AI is the 'Artificial Neural Networks (ANNs)'. Basically, ANNs are the mathematical algorithms, generated by computers. ANNs learn from standard data and capture the knowledge contained in the data. Trained ANNs approach the functionality of small biological neural cluster in a very fundamental manner. They are the digitized model of biological brain and can detect complex nonlinear relationships between dependent as well as independent variables in a data where human brain may fail to detect. Nowadays, ANNs are widely used for medical applications in various disciplines of medicine especially in cardiology. ANNs have been extensively applied in diagnosis, electronic signal analysis, medical image analysis and radiology. ANNs have been used by many authors for modeling in medicine and clinical research. Applications of ANNs are increasing in pharmacoepidemiology and medical data mining. In this paper, authors have summarized various applications of ANNs in medical science.

  20. Imaging requirements for medical applications of additive manufacturing.

    Science.gov (United States)

    Huotilainen, Eero; Paloheimo, Markku; Salmi, Mika; Paloheimo, Kaija-Stiina; Björkstrand, Roy; Tuomi, Jukka; Markkola, Antti; Mäkitie, Antti

    2014-02-01

    Additive manufacturing (AM), formerly known as rapid prototyping, is steadily shifting its focus from industrial prototyping to medical applications as AM processes, bioadaptive materials, and medical imaging technologies develop, and the benefits of the techniques gain wider knowledge among clinicians. This article gives an overview of the main requirements for medical imaging affected by needs of AM, as well as provides a brief literature review from existing clinical cases concentrating especially on the kind of radiology they required. As an example application, a pair of CT images of the facial skull base was turned into 3D models in order to illustrate the significance of suitable imaging parameters. Additionally, the model was printed into a preoperative medical model with a popular AM device. Successful clinical cases of AM are recognized to rely heavily on efficient collaboration between various disciplines - notably operating surgeons, radiologists, and engineers. The single main requirement separating tangible model creation from traditional imaging objectives such as diagnostics and preoperative planning is the increased need for anatomical accuracy in all three spatial dimensions, but depending on the application, other specific requirements may be present as well. This article essentially intends to narrow the potential communication gap between radiologists and engineers who work with projects involving AM by showcasing the overlap between the two disciplines.

  1. Medical Applications at CERN and the ENLIGHT Network.

    Science.gov (United States)

    Dosanjh, Manjit; Cirilli, Manuela; Myers, Steve; Navin, Sparsh

    2016-01-01

    State-of-the-art techniques derived from particle accelerators, detectors, and physics computing are routinely used in clinical practice and medical research centers: from imaging technologies to dedicated accelerators for cancer therapy and nuclear medicine, simulations, and data analytics. Principles of particle physics themselves are the foundation of a cutting edge radiotherapy technique for cancer treatment: hadron therapy. This article is an overview of the involvement of CERN, the European Organization for Nuclear Research, in medical applications, with specific focus on hadron therapy. It also presents the history, achievements, and future scientific goals of the European Network for Light Ion Hadron Therapy, whose co-ordination office is at CERN.

  2. Integrated Medical Model Project - Overview and Summary of Historical Application

    Science.gov (United States)

    Myers, J.; Boley, L.; Butler, D.; Foy, M.; Goodenow, D.; Griffin, D.; Keenan, A.; Kerstman, E.; Melton, S.; McGuire, K.; hide

    2015-01-01

    Introduction: The Integrated Medical Model (IMM) Project represents one aspect of NASA's Human Research Program (HRP) to quantitatively assess medical risks to astronauts for existing operational missions as well as missions associated with future exploration and commercial space flight ventures. The IMM takes a probabilistic approach to assessing the likelihood and specific outcomes of one hundred medical conditions within the envelope of accepted space flight standards of care over a selectable range of mission capabilities. A specially developed Integrated Medical Evidence Database (iMED) maintains evidence-based, organizational knowledge across a variety of data sources. Since becoming operational in 2011, version 3.0 of the IMM, the supporting iMED, and the expertise of the IMM project team have contributed to a wide range of decision and informational processes for the space medical and human research community. This presentation provides an overview of the IMM conceptual architecture and range of application through examples of actual space flight community questions posed to the IMM project. Methods: Figure 1 [see document] illustrates the IMM modeling system and scenario process. As illustrated, the IMM computational architecture is based on Probabilistic Risk Assessment techniques. Nineteen assumptions and limitations define the IMM application domain. Scenario definitions include crew medical attributes and mission specific details. The IMM forecasts probabilities of loss of crew life (LOCL), evacuation (EVAC), quality time lost during the mission, number of medical resources utilized and the number and type of medical events by combining scenario information with in-flight, analog, and terrestrial medical information stored in the iMED. In addition, the metrics provide the integrated information necessary to estimate optimized in-flight medical kit contents under constraints of mass and volume or acceptable level of mission risk. Results and Conclusions

  3. Medical applications of model-based dynamic thermography

    Science.gov (United States)

    Nowakowski, Antoni; Kaczmarek, Mariusz; Ruminski, Jacek; Hryciuk, Marcin; Renkielska, Alicja; Grudzinski, Jacek; Siebert, Janusz; Jagielak, Dariusz; Rogowski, Jan; Roszak, Krzysztof; Stojek, Wojciech

    2001-03-01

    The proposal to use active thermography in medical diagnostics is promising in some applications concerning investigation of directly accessible parts of the human body. The combination of dynamic thermograms with thermal models of investigated structures gives attractive possibility to make internal structure reconstruction basing on different thermal properties of biological tissues. Measurements of temperature distribution synchronized with external light excitation allow registration of dynamic changes of local temperature dependent on heat exchange conditions. Preliminary results of active thermography applications in medicine are discussed. For skin and under- skin tissues an equivalent thermal model may be determined. For the assumed model its effective parameters may be reconstructed basing on the results of transient thermal processes. For known thermal diffusivity and conductivity of specific tissues the local thickness of a two or three layer structure may be calculated. Results of some medical cases as well as reference data of in vivo study on animals are presented. The method was also applied to evaluate the state of the human heart during the open chest cardio-surgical interventions. Reference studies of evoked heart infarct in pigs are referred, too. We see the proposed new in medical applications technique as a promising diagnostic tool. It is a fully non-invasive, clean, handy, fast and affordable method giving not only qualitative view of investigated surfaces but also an objective quantitative measurement result, accurate enough for many applications including fast screening of affected tissues.

  4. Synchrotrons and their applications in medical imaging and therapy

    International Nuclear Information System (INIS)

    Lewis, R.

    2004-01-01

    Full text: Australasia's first synchrotron is being built on the campus of Monash University near Melbourne. Is it of any relevance to the medical imaging and radiation therapy communities? The answer is an unequivocal yes. Synchrotrons overcome many of the problems with conventional X-ray sources and as a result make it possible to demonstrate extraordinary advances in both X-ray imaging and indeed in radio-therapy. Synchrotron imaging offers us a window into what is possible and the results are spectacular. Specific examples include lung images that reveal alveolar structure and computed tomography of single cells. For therapy treatments are being pioneered that seem to be effective on high grade gliomas. An overview of the status of medical applications using synchrotrons will be given and the proposed Australian medical imaging and therapy facilities will be described and some of the proposed research highlighted. Copyright (2004) Australasian College of Physical Scientists and Engineers in Medicine

  5. Medication-use evaluation with a Web application.

    Science.gov (United States)

    Burk, Muriel; Moore, Von; Glassman, Peter; Good, Chester B; Emmendorfer, Thomas; Leadholm, Thomas C; Cunningham, Francesca

    2013-12-15

    A Web-based application for coordinating medication-use evaluation (MUE) initiatives within the Veterans Affairs (VA) health care system is described. The MUE Tracker (MUET) software program was created to improve VA's ability to conduct national medication-related interventions throughout its network of 147 medical centers. MUET initiatives are centrally coordinated by the VA Center for Medication Safety (VAMedSAFE), which monitors the agency's integrated databases for indications of suboptimal prescribing or drug therapy monitoring and adverse treatment outcomes. When a pharmacovigilance signal is detected, VAMedSAFE identifies "trigger groups" of at-risk veterans and uploads patient lists to the secure MUET application, where locally designated personnel (typically pharmacists) can access and use the data to target risk-reduction efforts. Local data on patient-specific interventions are stored in a centralized database and regularly updated to enable tracking and reporting for surveillance and quality-improvement purposes; aggregated data can be further analyzed for provider education and benchmarking. In a three-year pilot project, the MUET program was found effective in promoting improved prescribing of erythropoiesis-stimulating agents (ESAs) and enhanced laboratory monitoring of ESA-treated patients in all specified trigger groups. The MUET initiative has since been expanded to target other high-risk drugs, and efforts are underway to refine the tool for broader utility. The MUET application has enabled the increased standardization of medication safety initiatives across the VA system and may serve as a useful model for the development of pharmacovigilance tools by other large integrated health care systems.

  6. RF linear accelerators for medical and industrial applications

    CERN Document Server

    Hanna, Samy

    2012-01-01

    This unique resource offers you a clear overview of medical and industrial accelerators. Using minimal mathematics, this book focuses on offering thorough explanations of basic concepts surrounding the operation of accelerators. you find well illustrated discussions designed to help you use accelerator-based systems in a safer, more productive, and more reliable manner.This practical book details the manufacturing process for producing accelerators for medical and industrial applications. You become knowledgeable about the commonly encountered real-world manufacturing issues and potential sources of defects which help you avoid costly production problems. From principles of operation and the role of accelerators in cancer radiation therapy, to manufacturing techniques and future trends in accelerator design and applications, this easy-to-comprehend volume quickly brings you up-to-speed with the critical concepts you need to understand for your work in the field.

  7. Sovereign immunity: Principles and application in medical malpractice.

    Science.gov (United States)

    Suk, Michael

    2012-05-01

    Tort law seeks accountability when parties engage in negligent conduct, and aims to compensate the victims of such conduct. An exception to this general rule governing medical negligence is the doctrine of sovereign immunity. Historically, individuals acting under the authority of the government or other sovereign entity had almost complete protection against tort liability. This article addressed the following: (1) the development of sovereign immunity in law, (2) the lasting impact of the Federal Tort Claims Act on sovereign immunity, and (3) the contemporary application of sovereign immunity to medical malpractice, using case examples from Virginia and Florida. I performed an Internet search to identify sources that addressed the concept of sovereign immunity, followed by a focused search for relevant articles in PubMed and LexisNexis, literature databases for medical and legal professionals, respectively. Historically, sovereign liability conferred absolute immunity from lawsuits in favor of the sovereign (ie, the government). Practical considerations in our democratic system have contributed to an evolution of this doctrine. Understanding sovereign immunity and its contemporary application are of value for any physician interested in the debate concerning medical malpractice in the United States. Under certain circumstances, physicians working as employees of the federal or state government may be protected against individual liability if the government is substituted as the defendant.

  8. Natural radioactive materials. We need/we use them; Natuerliche radioaktive Stoffe. Wir (ge-)brauchen sie

    Energy Technology Data Exchange (ETDEWEB)

    Klaus Flesch [Saechsisches Landesamt fuer Umwelt, Landwirtschaft und Geologie, Dresden (Germany). Strahlenschutz; Gellermann, Rainer [Nuclear Control and Consulting GmbH, Braunschweig (Germany); Heuel-Fabianek, Burkhard [Forschungszentrum Juelich (Germany); and others

    2017-04-01

    The articles in this edition present a small excerpt in the field of natural radioactive materials amongst others in the building industries, in the medical field or in scientific research. Due to the new radiation protection law, the natural occuring radioactive materials become more important to protect the general public.

  9. Medical applications of nuclear physics and heavy-ion beams

    International Nuclear Information System (INIS)

    Alonso, Jose R.

    2000-01-01

    Isotopes and accelerators, hallmarks of nuclear physics, are finding increasingly sophisticated and effective applications in the medical field. Diagnostic and therapeutic uses of radioisotopes are now a $10B/yr business worldwide, with over 10 million procedures and patient studies performed every year. This paper will discuss the use of isotopes for these applications. In addition, beams of protons and heavy ions are being more and more widely used clinically for treatment of malignancies. To be discussed here as well will be the rationale and techniques associated with charged-particle therapy, and the progress in implementation and optimization of these technologies for clinical use

  10. The application of accelerator for medical therapy in Indonesia

    International Nuclear Information System (INIS)

    Yunasfi; Mudjiono; Irwati, Dwi; Hanifa

    2003-01-01

    The study of the application of accelerator for medical therapy in Indonesia was carried out. Accelerator that used for therapy is an electron lintier accelerator (Linac) which can radiate electron beam and X-ray. This study shows that there are 8 unit of Linac distributed at 6 big hospitals in Indonesia, especially in Jakarta. This study also shows that radiotherapy facilities in Indonesia is un sufficient of. Therefore, providing radiotherapy facilities for hospitals, especially the big hospitals in Indonesia is necessary

  11. Ultra Wideband Wireless Body Area Network for Medical Applications

    Science.gov (United States)

    2010-04-01

    Medical Applications RTO-MP-HFM-182 42 - 11 z x y Tumour Fat Skin Chest Figure 8: A Simple Hemispherical Brest Model. Table 2...x y Tumour Fat Skin Chest wall  Glands Nipple Figure 9: A Comprehensive Hemispherical Brest Model. The base diameter of the breast is...34 in Proc. 2nd European Radar Conference (EuRAD), Paris , France, October 6–7, 2005, pp. 97–100. [38] M. Sugawara, K. Niki, H. Furuhata, S. Ohnishi

  12. Machine learning for epigenetics and future medical applications

    OpenAIRE

    Holder, Lawrence B.; Haque, M. Muksitul; Skinner, Michael K.

    2017-01-01

    ABSTRACT Understanding epigenetic processes holds immense promise for medical applications. Advances in Machine Learning (ML) are critical to realize this promise. Previous studies used epigenetic data sets associated with the germline transmission of epigenetic transgenerational inheritance of disease and novel ML approaches to predict genome-wide locations of critical epimutations. A combination of Active Learning (ACL) and Imbalanced Class Learning (ICL) was used to address past problems w...

  13. Data bank applications of a nuclear medical computer system

    International Nuclear Information System (INIS)

    Hale, T.I.; Jucker, A.; Haering, W.; Schmid, B.

    1980-01-01

    Computer systems in nuclear medicine are normally not used for data bank applications. A concept for a PDP-11-34 with RK 05 disc is presented, which serves the needs of data manipulations of a medium sized hospital including management of patient data, pharma stock control etc. besides specific use for nuclear medical work with absolute priority. The program is available upon request. (orig.) [de

  14. Modeling of bubble dynamics in relation to medical applications

    Energy Technology Data Exchange (ETDEWEB)

    Amendt, P.A.; London, R.A. [Lawrence Livermore National Lab., CA (United States); Strauss, M. [California Univ., Davis, CA (United States)]|[Israel Atomic Energy Commission, Beersheba (Israel). Nuclear Research Center-Negev] [and others

    1997-03-12

    In various pulsed-laser medical applications, strong stress transients can be generated in advance of vapor bubble formation. To better understand the evolution of stress transients and subsequent formation of vapor bubbles, two-dimensional simulations are presented in channel or cylindrical geometry with the LATIS (LAser TISsue) computer code. Differences with one-dimensional modeling are explored, and simulated experimental conditions for vapor bubble generation are presented and compared with data. 22 refs., 8 figs.

  15. Applications of nuclear technique in environmental and medical science

    International Nuclear Information System (INIS)

    Shi Xianfeng; Shen Hao; Liu Bo; Sun Minde; Yao Huiying; Zhou Shijun; Mi Yong

    2001-01-01

    The serious environmental pollution problem and application of the nuclear technique in environmental and medical sciences were discussed. The analysed results of the elemental distribution of particles in automobile exhaust, the aerosol particle of different size and the effect of Rare Earth on cells were reported. The authors can obtain some information related to element concentration. It offers a convenient method in inspecting the environmental pollution

  16. Modeling of bubble dynamics in relation to medical applications

    International Nuclear Information System (INIS)

    Amendt, P.A.; London, R.A.; Strauss, M.; Israel Atomic Energy Commission, Beersheba

    1997-01-01

    In various pulsed-laser medical applications, strong stress transients can be generated in advance of vapor bubble formation. To better understand the evolution of stress transients and subsequent formation of vapor bubbles, two-dimensional simulations are presented in channel or cylindrical geometry with the LATIS (LAser TISsue) computer code. Differences with one-dimensional modeling are explored, and simulated experimental conditions for vapor bubble generation are presented and compared with data. 22 refs., 8 figs

  17. Applications of Monte Carlo method in Medical Physics

    International Nuclear Information System (INIS)

    Diez Rios, A.; Labajos, M.

    1989-01-01

    The basic ideas of Monte Carlo techniques are presented. Random numbers and their generation by congruential methods, which underlie Monte Carlo calculations are shown. Monte Carlo techniques to solve integrals are discussed. The evaluation of a simple monodimensional integral with a known answer, by means of two different Monte Carlo approaches are discussed. The basic principles to simualate on a computer photon histories reduce variance and the current applications in Medical Physics are commented. (Author)

  18. Medical applications of atomic force microscopy and Raman spectroscopy.

    Science.gov (United States)

    Choi, Samjin; Jung, Gyeong Bok; Kim, Kyung Sook; Lee, Gi-Ja; Park, Hun-Kuk

    2014-01-01

    This paper reviews the recent research and application of atomic force microscopy (AFM) and Raman spectroscopy techniques, which are considered the multi-functional and powerful toolkits for probing the nanostructural, biomechanical and physicochemical properties of biomedical samples in medical science. We introduce briefly the basic principles of AFM and Raman spectroscopy, followed by diagnostic assessments of some selected diseases in biomedical applications using them, including mitochondria isolated from normal and ischemic hearts, hair fibers, individual cells, and human cortical bone. Finally, AFM and Raman spectroscopy applications to investigate the effects of pharmacotherapy, surgery, and medical device therapy in various medicines from cells to soft and hard tissues are discussed, including pharmacotherapy--paclitaxel on Ishikawa and HeLa cells, telmisartan on angiotensin II, mitomycin C on strabismus surgery and eye whitening surgery, and fluoride on primary teeth--and medical device therapy--collagen cross-linking treatment for the management of progressive keratoconus, radiofrequency treatment for skin rejuvenation, physical extracorporeal shockwave therapy for healing of Achilles tendinitis, orthodontic treatment, and toothbrushing time to minimize the loss of teeth after exposure to acidic drinks.

  19. How to identify, assess and utilise mobile medical applications in clinical practice.

    Science.gov (United States)

    Aungst, T D; Clauson, K A; Misra, S; Lewis, T L; Husain, I

    2014-02-01

    There are thousands of medical applications for mobile devices targeting use by healthcare professionals. However, several factors related to the structure of the existing market for medical applications create significant barriers preventing practitioners from effectively identifying mobile medical applications for individual professional use. To define existing market factors relevant to selection of medical applications and describe a framework to empower clinicians to identify, assess and utilise mobile medical applications in their own practice. Resources available on the Internet regarding mobile medical applications, guidelines and published research on mobile medical applications. Mobile application stores (e.g. iTunes, Google Play) are not effective means of identifying mobile medical applications. Users of mobile devices that desire to implement mobile medical applications into practice need to carefully assess individual applications prior to utilisation. Searching and identifying mobile medical applications requires clinicians to utilise multiple references to determine what application is best for their individual practice methods. This can be done with a cursory exploration of mobile application stores and then moving onto other available resources published in the literature or through Internet resources (e.g. blogs, medical websites, social media). Clinicians must also take steps to ensure that an identified mobile application can be integrated into practice after carefully reviewing it themselves. Clinicians seeking to identify mobile medical application for use in their individual practice should use a combination of app stores, published literature, web-based resources, and personal review to ensure safe and appropriate use. © 2014 John Wiley & Sons Ltd.

  20. [Non-medical applications for brain MRI: Ethical considerations].

    Science.gov (United States)

    Sarrazin, S; Fagot-Largeault, A; Leboyer, M; Houenou, J

    2015-04-01

    The recent neuroimaging techniques offer the possibility to better understand complex cognitive processes that are involved in mental disorders and thus have become cornerstone tools for research in psychiatry. The performances of functional magnetic resonance imaging are not limited to medical research and are used in non-medical fields. These recent applications represent new challenges for bioethics. In this article we aim at discussing the new ethical issues raised by the applications of the latest neuroimaging technologies to non-medical fields. We included a selection of peer-reviewed English medical articles after a search on NCBI Pubmed database and Google scholar from 2000 to 2013. We screened bibliographical tables for supplementary references. Websites of governmental French institutions implicated in ethical questions were also screened for governmental reports. Findings of brain areas supporting emotional responses and regulation have been used for marketing research, also called neuromarketing. The discovery of different brain activation patterns in antisocial disorder has led to changes in forensic psychiatry with the use of imaging techniques with unproven validity. Automated classification algorithms and multivariate statistical analyses of brain images have been applied to brain-reading techniques, aiming at predicting unconscious neural processes in humans. We finally report the current position of the French legislation recently revised and discuss the technical limits of such techniques. In the near future, brain imaging could find clinical applications in psychiatry as diagnostic or predictive tools. However, the latest advances in brain imaging are also used in non-scientific fields raising key ethical questions. Involvement of neuroscientists, psychiatrists, physicians but also of citizens in neuroethics discussions is crucial to challenge the risk of unregulated uses of brain imaging. Copyright © 2014 L’Encéphale, Paris. Published by

  1. Properties and medical applications of shape memory alloys.

    Science.gov (United States)

    Tarniţă, Daniela; Tarniţă, D N; Bîzdoacă, N; Mîndrilă, I; Vasilescu, Mirela

    2009-01-01

    One of the most known intelligent material is nitinol, which offers many functional advantages over conventional implantable alloys. Applications of SMA to the biomedical field have been successful because of their functional qualities, enhancing both the possibility and the execution of less invasive surgeries. The biocompatibility of these alloys is one of their most important features. Different applications exploit the shape memory effect (one-way or two-way) and the super elasticity, so that they can be employed in orthopedic and cardiovascular applications, as well as in the manufacture of new surgical tools. Therefore, one can say that smart materials, especially SMA, are becoming noticeable in the biomedical field. Super elastic NiTi has become a material of strategic importance as it allows to overcome a wide range of technical and design issues relating to the miniaturization of medical devices and the increasing trend for less invasive and therefore less traumatic procedures. This paper will consider just why the main properties of shape memory alloys hold so many opportunities for medical devices and will review a selection of current applications.

  2. Identification and Evaluation of Medical Translator Mobile Applications Using an Adapted APPLICATIONS Scoring System.

    Science.gov (United States)

    Khander, Amrin; Farag, Sara; Chen, Katherine T

    2017-12-22

    With an increasing number of patients requiring translator services, many providers are turning to mobile applications (apps) for assistance. However, there have been no published reviews of medical translator apps. To identify and evaluate medical translator mobile apps using an adapted APPLICATIONS scoring system. A list of apps was identified from the Apple iTunes and Google Play stores, using the search term, "medical translator." Apps not found on two different searches, not in an English-based platform, not used for translation, or not functional after purchase, were excluded. The remaining apps were evaluated using an adapted APPLICATIONS scoring system, which included both objective and subjective criteria. App comprehensiveness was a weighted score defined by the number of non-English languages included in each app relative to the proportion of non-English speakers in the United States. The Apple iTunes and Google Play stores. Medical translator apps identified using the search term "medical translator." Main Outcomes and Measures: Compilation of medical translator apps for provider usage. A total of 524 apps were initially found. After applying the exclusion criteria, 20 (8.2%) apps from the Google Play store and 26 (9.2%) apps from the Apple iTunes store remained for evaluation. The highest scoring apps, Canopy Medical Translator, Universal Doctor Speaker, and Vocre Translate, scored 13.5 out of 18.7 possible points. A large proportion of apps initially found did not function as medical translator apps. Using the APPLICATIONS scoring system, we have identified and evaluated medical translator apps for providers who care for non-English speaking patients.

  3. User Interface Design in Medical Distributed Web Applications.

    Science.gov (United States)

    Serban, Alexandru; Crisan-Vida, Mihaela; Mada, Leonard; Stoicu-Tivadar, Lacramioara

    2016-01-01

    User interfaces are important to facilitate easy learning and operating with an IT application especially in the medical world. An easy to use interface has to be simple and to customize the user needs and mode of operation. The technology in the background is an important tool to accomplish this. The present work aims to creating a web interface using specific technology (HTML table design combined with CSS3) to provide an optimized responsive interface for a complex web application. In the first phase, the current icMED web medical application layout is analyzed, and its structure is designed using specific tools, on source files. In the second phase, a new graphic adaptable interface to different mobile terminals is proposed, (using HTML table design (TD) and CSS3 method) that uses no source files, just lines of code for layout design, improving the interaction in terms of speed and simplicity. For a complex medical software application a new prototype layout was designed and developed using HTML tables. The method uses a CSS code with only CSS classes applied to one or multiple HTML table elements, instead of CSS styles that can be applied to just one DIV tag at once. The technique has the advantage of a simplified CSS code, and a better adaptability to different media resolutions compared to DIV-CSS style method. The presented work is a proof that adaptive web interfaces can be developed just using and combining different types of design methods and technologies, using HTML table design, resulting in a simpler to learn and use interface, suitable for healthcare services.

  4. Open-source software platform for medical image segmentation applications

    Science.gov (United States)

    Namías, R.; D'Amato, J. P.; del Fresno, M.

    2017-11-01

    Segmenting 2D and 3D images is a crucial and challenging problem in medical image analysis. Although several image segmentation algorithms have been proposed for different applications, no universal method currently exists. Moreover, their use is usually limited when detection of complex and multiple adjacent objects of interest is needed. In addition, the continually increasing volumes of medical imaging scans require more efficient segmentation software design and highly usable applications. In this context, we present an extension of our previous segmentation framework which allows the combination of existing explicit deformable models in an efficient and transparent way, handling simultaneously different segmentation strategies and interacting with a graphic user interface (GUI). We present the object-oriented design and the general architecture which consist of two layers: the GUI at the top layer, and the processing core filters at the bottom layer. We apply the framework for segmenting different real-case medical image scenarios on public available datasets including bladder and prostate segmentation from 2D MRI, and heart segmentation in 3D CT. Our experiments on these concrete problems show that this framework facilitates complex and multi-object segmentation goals while providing a fast prototyping open-source segmentation tool.

  5. Aliphatic polyesters for medical imaging and theranostic applications.

    Science.gov (United States)

    Nottelet, Benjamin; Darcos, Vincent; Coudane, Jean

    2015-11-01

    Medical imaging is a cornerstone of modern medicine. In that context the development of innovative imaging systems combining biomaterials and contrast agents (CAs)/imaging probes (IPs) for improved diagnostic and theranostic applications focuses intense research efforts. In particular, the classical aliphatic (co)polyesters poly(lactide) (PLA), poly(lactide-co-glycolide) (PLGA) and poly(ɛ-caprolactone) (PCL), attract much attention due to their long track record in the medical field. This review aims therefore at providing a state-of-the-art of polyester-based imaging systems. In a first section a rapid description of the various imaging modalities, including magnetic resonance imaging (MRI), optical imaging, computed tomography (CT), ultrasound (US) and radionuclide imaging (SPECT, PET) will be given. Then, the two main strategies used to combine the CAs/IPs and the polyesters will be discussed. In more detail we will first present the strategies relying on CAs/IPs encapsulation in nanoparticles, micelles, dendrimers or capsules. We will then present chemical modifications of polyesters backbones and/or polyester surfaces to yield macromolecular imaging agents. Finally, opportunities offered by these innovative systems will be illustrated with some recent examples in the fields of cell labeling, diagnostic or theranostic applications and medical devices. Copyright © 2015 Elsevier B.V. All rights reserved.

  6. Application of Learning Theories on Medical Imaging Education

    Directory of Open Access Journals (Sweden)

    Osama A. Mabrouk Kheiralla

    2018-05-01

    Full Text Available The main objective of the education process is that student must learn well rather than the educators to teach well. If radiologists get involved in the process of medical education, it is important for them to do it through sound knowledge of how students learn. Researches have proved that most of the teachers in the field of medical education including diagnostic imaging are actually doctors or technicians, who didn’t have an opportunity to study the basics of learning. Mostly they have gained their knowledge through watching other educators, and they mostly rely on their personal skills and experience in doing their job. This will hinder them from conveying knowledge in an effective and scientific way, and they will find themselves lagging away behind the latest advances in the field of medical education and educational research, which will lead to negative cognitive outcomes among learners. This article presents an overview of three of the most influential basic theories of learning, upon which many teachers rely in their practical applications, which must be considered by radiologist who act as medical educators.

  7. Quality assurance in medical radiation applications. The medical and dental appointment; Qualitaetssicherung bei medizinischen Strahlenanwendungen. Die aerztlichen und zahnaerztlichen Stellen

    Energy Technology Data Exchange (ETDEWEB)

    Ernst-Elz, Andreas [Ministerium fuer Energiewende, Landwirtschaft, Umwelt, Natur und Digitalisierung des Landes Schleswig-Holstein, Kiel (Germany)

    2017-07-01

    Medical radiation applications cause averaged over the German population an annual exposure of almost 2 mSv. Medical authorities have the assignment to assure and control the diagnostic and therapeutic quality of these applications and to provide recommendations for operators with respect to dose reductions and radiation protection, including guidance for radiotherapy planning aimed to questions of dose and therapy optimization.

  8. 21 CFR 515.11 - Supplemental medicated feed mill license applications.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Supplemental medicated feed mill license... SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS MEDICATED FEED MILL LICENSE Applications § 515.11 Supplemental medicated feed mill license applications. (a) After approval of a medicated feed...

  9. Application of the ICRP recommendations in medical radiation practice and in medical monitoring of workers

    International Nuclear Information System (INIS)

    Lafontaine, A.

    1979-01-01

    Medical exposure in connection with an existing or suspected illness may be made subject to the ICRP principles, but it must be realized that the dose limitation system cannot necessarily be applied when the individual at risk is the one benefiting from examination or treatment. Justification is the responsibility of the doctor prescribing the examination or treatment and/or of the person carrying it out. Optimization will be achieved by virtue of the rules imposed on doctors and by the requirements applicable to equipment and techniques. The same rules and requirements apply mutatis mutandis to check-ups, routine medical examinations, examinations for professional purposes, medico-legal examinations and medical research. In the last case ethical rules and criteria for the validity of the proposed research also need to be applied. Medical monitoring of workers must take the ICRP principles into account, but a qualified doctor should nevertheless be able to form his own judgement on the basis of his knowledge of different types of exposure (both to radiation and to other agents), to intervene in cases of accidental or planned exposure, and to gather data in order to evaluate the long-term effects and the consequences of occupational exposure in terms of doses to the public. Moreover, the doctor should inform the worker of his conclusions and recommendations. (author)

  10. Real-time image mosaicing for medical applications.

    Science.gov (United States)

    Loewke, Kevin E; Camarillo, David B; Jobst, Christopher A; Salisbury, J Kenneth

    2007-01-01

    In this paper we describe the development of a robotically-assisted image mosaicing system for medical applications. The processing occurs in real-time due to a fast initial image alignment provided by robotic position sensing. Near-field imaging, defined by relatively large camera motion, requires translations as well as pan and tilt orientations to be measured. To capture these measurements we use 5-d.o.f. sensing along with a hand-eye calibration to account for sensor offset. This sensor-based approach speeds up the mosaicing, eliminates cumulative errors, and readily handles arbitrary camera motions. Our results have produced visually satisfactory mosaics on a dental model but can be extended to other medical images.

  11. Ionizing radiation sources used in medical applications in Brazil

    International Nuclear Information System (INIS)

    Araujo, A.M.C.; Carlos, M.T.; Cruz, L.R.F.; Domingues, C.; Farias, J.T.; Ferreira, R.; Figueiredo, L.; Peixoto, J.E.; Oliveira, S.M.V.; Drexler, G.

    1991-02-01

    Preliminary data about ionizing radiation sources used in medical applications and obtained through a national programme by IRD/CNEN together with Brazilian health authorities are presented. The data presentation follows, as close as possible, recommendations given by the United Nations Scientific Committee on Effects of Atomic Radiation (UNSCEAR). This programme has two main aims: First: to contribute for research in the field of ionizing radiation effects and risks including information about equipment quality control and procedures adopted by professionals working in Radiation Medicine. Second: to investigate the radiation protection status in Brazil, in order to give assistance to Brazilian health authorities for planning regional radiation programmes and training programmes for medical staffs. (F.E.). 13 refs, 19 figs, 34 tabs

  12. Scanning Micromirror Platform Based on MEMS Technology for Medical Application

    Directory of Open Access Journals (Sweden)

    Eakkachai Pengwang

    2016-02-01

    Full Text Available This topical review discusses recent development and trends on scanning micromirrors for biomedical applications. This also includes a biomedical micro robot for precise manipulations in a limited volume. The characteristics of medical scanning micromirror are explained in general with the fundamental of microelectromechanical systems (MEMS for fabrication processes. Along with the explanations of mechanism and design, the principle of actuation are provided for general readers. In this review, several testing methodology and examples are described based on many types of actuators, such as, electrothermal actuators, electrostatic actuators, electromagnetic actuators, pneumatic actuators, and shape memory alloy. Moreover, this review provides description of the key fabrication processes and common materials in order to be a basic guideline for selecting micro-actuators. With recent developments on scanning micromirrors, performances of biomedical application are enhanced for higher resolution, high accuracy, and high dexterity. With further developments on integrations and control schemes, MEMS-based scanning micromirrors would be able to achieve a better performance for medical applications due to small size, ease in microfabrication, mass production, high scanning speed, low power consumption, mechanical stable, and integration compatibility.

  13. Access control based on attribute certificates for medical intranet applications.

    Science.gov (United States)

    Mavridis, I; Georgiadis, C; Pangalos, G; Khair, M

    2001-01-01

    Clinical information systems frequently use intranet and Internet technologies. However these technologies have emphasized sharing and not security, despite the sensitive and private nature of much health information. Digital certificates (electronic documents which recognize an entity or its attributes) can be used to control access in clinical intranet applications. To outline the need for access control in distributed clinical database systems, to describe the use of digital certificates and security policies, and to propose the architecture for a system using digital certificates, cryptography and security policy to control access to clinical intranet applications. We have previously developed a security policy, DIMEDAC (Distributed Medical Database Access Control), which is compatible with emerging public key and privilege management infrastructure. In our implementation approach we propose the use of digital certificates, to be used in conjunction with DIMEDAC. Our proposed access control system consists of two phases: the ways users gain their security credentials; and how these credentials are used to access medical data. Three types of digital certificates are used: identity certificates for authentication; attribute certificates for authorization; and access-rule certificates for propagation of access control policy. Once a user is identified and authenticated, subsequent access decisions are based on a combination of identity and attribute certificates, with access-rule certificates providing the policy framework. Access control in clinical intranet applications can be successfully and securely managed through the use of digital certificates and the DIMEDAC security policy.

  14. ``Low Power Wireless Technologies: An Approach to Medical Applications''

    Science.gov (United States)

    Bellido O., Francisco J.; González R., Miguel; Moreno M., Antonio; de La Cruz F, José Luis

    Wireless communication supposed a great both -quantitative and qualitative, jump in the management of the information, allowing the access and interchange of it without the need of a physical cable connection. The wireless transmission of voice and information has remained in constant evolution, arising new standards like BluetoothTM, WibreeTM or ZigbeeTM developed under the IEEE 802.15 norm. These newest wireless technologies are oriented to systems of communication of short-medium distance and optimized for a low cost and minor consume, becoming recognized as a flexible and reliable medium for data communications across a broad range of applications due to the potential that the wireless networks presents to operate in demanding environments providing clear advantages in cost, size, power, flexibility, and distributed intelligence. About the medical applications, the remote health or telecare (also called eHealth) is getting a bigger place into the manufacturers and medical companies, in order to incorporate products for assisted living and remote monitoring of health parameteres. At this point, the IEEE 1073, Personal Health Devices Working Group, stablish the framework for these kind of applications. Particularly, the 1073.3.X describes the physical and transport layers, where the new ultra low power short range wireless technologies can play a big role, providing solutions that allow the design of products which are particularly appropriate for monitor people’s health with interoperability requirements.

  15. Medical and surgical applications of space biosensor technology

    Science.gov (United States)

    Hines, J. W.

    1996-01-01

    Researchers in space life sciences are rapidly approaching a technology impasse. Many of the critical questions on the impact of spaceflight on living systems simply cannot be answered with the limited available technologies. Research subjects, particularly small animal models like the rat, must be allowed to function relatively untended and unrestrained for long periods to fully reflect the impact of microgravity and spaceflight on their behavior and physiology. These requirements preclude the use of present hard-wired instrumentation techniques and limited data acquisition systems. Implantable sensors and miniaturized biotelemetry are the only means of capturing the fundamental and critical data. This same biosensor and biotelemetry technology has direct application to Earth-based medicine and surgery. Continuous, on-line data acquisition and improved measurement capabilities combined with the ease and flexibility offered by automated, wireless, and portable instruments and data systems, should provide a boon to the health care industry. Playing a key role in this technology revolution is the Sensors 2000! (S2K!) Program at NASA Ames Research Center. S2K!, in collaboration with space life sciences researchers and managers, provides an integrated capability for sensor technology development and applications, including advanced biosensor technology development, spaceflight hardware development, and technology transfer and commercialization. S2K! is presently collaborating on several spaceflight projects with dual-use medical applications. One prime example is a collaboration with the Fetal Treatment Center (FTC) at the University of California at San Francisco. The goal is to develop and apply implantable chemical sensor and biotelemetry technology to continuously monitor fetal patients during extra-uterine surgery, replacement into the womb, through birth and beyond. Once validated for ground use, the method will be transitioned to spaceflight applications to

  16. Medical and surgical applications of space biosensor technology

    Science.gov (United States)

    Hines, John W.

    1996-02-01

    Researchers in space life sciences are rapidly approaching a technology impasse. Many of the critical questions on the impact of spaceflight on living systems simply cannot be answered with the limited available technologies. Research subjects, particularly small animal models like the rat, must be allowed to function relatively untended and unrestrained for long periods to fully reflect the impact of microgravity and spaceflight on their behavior and physiology. These requirements preclude the use of present hard-wired instrumentation techniques and limited data acquisition systems. Implantable sensors and miniaturized biotelemetry are the only means of capturing the fundamental and critical data. This same biosensor and biotelemetry technology has direct application to Earth-based medicine and surgery. Continuous, on-line data acquisition and improved measurement capabilities combined with the ease and flexibility offered by automated, wireless, and portable instruments and data systems, should provide a boon to the health care industry. Playing a key role in this technology revolution is the Sensors 2000! (S2K!) Program at NASA Ames Research Center. S2K!, in collaboration with space life sciences researchers and managers, provides an integrated capability for sensor technology development and applications, including advanced biosensor technology development, spaceflight hardware development, and technology transfer and commercialization. S2K! is presently collaborating on several spaceflight projects with dual-use medical applications. One prime example is a collaboration with the Fetal Treatment Center (FTC) at the University of California at San Francisco. The goal is to develop and apply implantable chemical sensor and biotelemetry technology to continuously monitor fetal patients during extra-uterine surgery, replacement into the womb, through birth and beyond. Once validated for ground use, the method will be transitioned to spaceflight applications to

  17. Smartphone application for mechanical quality assurance of medical linear accelerators.

    Science.gov (United States)

    Kim, Hwiyoung; Lee, Hyunseok; Park, Jong In; Choi, Chang Heon; Park, So-Yeon; Kim, Hee Jung; Kim, Young Suk; Ye, Sung-Joon

    2017-06-07

    Mechanical quality assurance (QA) of medical linear accelerators consists of time-consuming and human-error-prone procedures. We developed a smartphone application system for mechanical QA. The system consists of two smartphones: one attached to a gantry for obtaining real-time information on the mechanical parameters of the medical linear accelerator, and another displaying real-time information via a Bluetooth connection with the former. Motion sensors embedded in the smartphone were used to measure gantry and collimator rotations. Images taken by the smartphone's high-resolution camera were processed to evaluate accuracies of jaw-positioning, crosshair centering and source-to-surface distance (SSD). The application was developed using Android software development kit and OpenCV library. The accuracy and precision of the system was validated against an optical rotation stage and digital calipers, prior to routine QA measurements of five medical linear accelerators. The system accuracy and precision in measuring angles and lengths were determined to be 0.05  ±  0.05° and 0.25  ±  0.14 mm, respectively. The mean absolute errors (MAEs) in QA measurements of gantry and collimator rotation were 0.05  ±  0.04° and 0.05  ±  0.04°, respectively. The MAE in QA measurements of light field was 0.39  ±  0.36 mm. The MAEs in QA measurements of crosshair centering and SSD were 0.40  ±  0.35 mm and 0.41  ±  0.32 mm, respectively. In conclusion, most routine mechanical QA procedures could be performed using the smartphone application system with improved precision and within a shorter time-frame, while eliminating potential human errors.

  18. Radiation processed hydrogels (wound dressings) for medical applications

    International Nuclear Information System (INIS)

    Varshney, Lalit

    2004-01-01

    Thermal analysis plays an important role in study and development of hydrogel materials for medical applications. Thermal stability of the ingredients which is important from the point of manufacturing, rate of evaporation for shelf life evaluation, determination of gelation and temperature responsive temperatures, cooling behaviour, gel elasticity, radiation effects etc. can be studied using thermal analysis equipment like Differential scanning calorimetry (DSC), Thermo-gravimetric analysis (TGA) and thermo-mechanical analysis (TMA). In this use of these techniques in development, evaluation and quality control of hydrogel wound dressing is discussed

  19. Positron emitting radionuclides: manufacturing, labelling and examples of medical applications

    International Nuclear Information System (INIS)

    Comar, D.; Maziere, M.; Berger, G.; Crouzel, C.; Soussaline, F.; Kellershohn, C.

    1979-01-01

    The only radioisotopes of carbon, oxygen and nitrogen which can be used in medicine are positrons emitters. They may be incorporated in organic molecules and detected in vivo by quantitative emission tomography. The manufacture of these short lived radioisotopes need a cyclotron to be set up in a hospital. The main procedures for making these radioisotopes are described so as their incorporation in complex molecules. Some medical applications in the field of the brain blood-flow, and oxygen consumption, the cerebral amino-acids metabolism and the brain distribution of psychoactive drugs are described [fr

  20. Shape memory polymer cellular solid design for medical applications

    International Nuclear Information System (INIS)

    De Nardo, L; Bertoldi, S; Tanzi, M C; Farè, S; Haugen, H J

    2011-01-01

    Shape memory polymers (SMPs) are an emerging class of active materials whose response can be easily tailored via modifications of the molecular parameters and optimization of the transformation processes. In this work, we originally demonstrated that a correct coupling of polymer transformation processes (co-extrusion with chemical blowing agents, salt co-extrusion/particulate leaching, solvent casting/particulate leaching) and SMPs allows one to obtain porous structures with a broad spectrum of morphological properties resulting in tunable thermo-mechanical and shape recovery properties. Such a wide range of properties could fulfil the specifications of medical applications in which the use of SMP-based foams can be envisaged

  1. Application of object modeling technique to medical image retrieval system

    International Nuclear Information System (INIS)

    Teshima, Fumiaki; Abe, Takeshi

    1993-01-01

    This report describes the results of discussions on the object-oriented analysis methodology, which is one of the object-oriented paradigms. In particular, we considered application of the object modeling technique (OMT) to the analysis of a medical image retrieval system. The object-oriented methodology places emphasis on the construction of an abstract model from real-world entities. The effectiveness of and future improvements to OMT are discussed from the standpoint of the system's expandability. These discussions have elucidated that the methodology is sufficiently well-organized and practical to be applied to commercial products, provided that it is applied to the appropriate problem domain. (author)

  2. Affective computing and medical informatics: state of the art in emotion-aware medical applications.

    Science.gov (United States)

    Luneski, Andrej; Bamidis, Panagiotis D; Hitoglou-Antoniadou, Madga

    2008-01-01

    The area of affective computing has received significant attention by the research community over the last few years. In this paper we review the underlying principles in the field, in an effort to draw threads for possible future development within medical informatics. The approach is lead by considering the three main affective channels, namely, visual, audio/speech, and physiological in relation to e-health, emotional intelligence and e-learning. A discussion on the importance of past and present applications together with a prediction on future literature output is also provided.

  3. Mobile-Based Medical Health Application - Medi-Chat App

    Directory of Open Access Journals (Sweden)

    Mustapha Adamu Mohammed

    2017-05-01

    Full Text Available The aftermath of the development and implementation of the Android operating system and its associated Application Programming InterfacesAPI by Google culminated in the development more mobile device-enabled applications designed for our day-to-day businesses and personal use however in recent times we are experiencing a massive revolution in the use of mobile technology in the health sectors of our economy and this revolution is termed as Mobile Health Technology MHT.This new technological breakthrough has enabled the development of powerful android applications that enabled people tract and monitor the treat of heart and kidney related diseases as well as the monitoring and evaluation certain drug prescriptions. It has also changed the way we communicate with our specialist doctors from phone text to mobile-based communication. All these interventions provided by MHT have drastically increased the efficient and effective provision of health care delivery on one side and providing a common platform for prospective patients to easily interact with health professionals for medical advice and subsequent treatment of their diseases. Moreover In Ghana It would provide a much efficient and cost effective way of improving health-care methodologies in this 21st century which is characterized by information and communication technology. In this paper the main goal is to develop a mobile health application that provides common platform prospective patients and specialist doctors give free consultation and health tips on health related conditions thereby reducing the difficulty and challenges uncounted in accessing free medical health care at the already overburdened hospitals polyclinics and health centers in Ghana.

  4. The application of wiki technology in medical education.

    Science.gov (United States)

    Rasmussen, Andrew; Lewis, Melanie; White, Jonathan

    2013-01-01

    BACKGROUND, AIMS AND METHODS: Recent years have seen the introduction of web-based technologies such as the 'wiki', which is a webpage whose content can be edited in real time using a web browser. This article reviews the current state of knowledge about the use of wikis in education, and considers whether wiki technology has features that might prove useful in medical education. Advantages and challenges of the technology are discussed, and recommendations for use are provided. We believe that wiki technology offers a number of potential benefits for administrators, students and instructors, including the ability to share information online, to construct knowledge together, to facilitate collaboration and to enable social learning and peer feedback. We believe that with proper planning and instructional design, wiki technology can be usefully employed in medical education. We intend to continue to study the impact of wiki technology in our own programme, and we encourage others to evaluate the application of wiki technology in other areas of medical education.

  5. Features and application of wearable biosensors in medical care

    Directory of Open Access Journals (Sweden)

    Sima Ajami

    2015-01-01

    Full Text Available One of the new technologies in the field of health is wearable biosensor, which provides vital signs monitoring of patients, athletes, premature infants, children, psychiatric patients, people who need long-term care, elderly, and people in impassable regions far from health and medical services. The aim of this study was to explain features and applications of wearable biosensors in medical services. This was a narrative review study that done in 2015. Search conducted with the help of libraries, books, conference proceedings, through databases of Science Direct, PubMed, Proquest, Springer, and SID (Scientific Information Database. In our searches, we employed the following keywords and their combinations; vital sign monitoring, medical smart shirt, smart clothing, wearable biosensors, physiological monitoring system, remote detection systems, remote control health, and bio-monitoring system. The preliminary search resulted in 54 articles, which published between 2002 and 2015. After a careful analysis of the content of each paper, 41 sources selected based on their relevancy. Although the use of wearable in healthcare is still in an infant stage, it could have a magic effect on healthcare. Smart wearable in the technology industry for 2015 is one that is looking to be a big and profitable market. Wearable biosensors capable of continuous vital signs monitoring and feedback to the user will be significantly effective in timely prevention, diagnosis, treatment, and control of diseases.

  6. Pre-Medical Preparation in Microbiology among Applicants and Matriculants in Osteopathic Medical School in the United States.

    Science.gov (United States)

    Ramos, Raddy L; Guercio, Erik; Martinez, Luis R

    2017-01-01

    It is recognized that medical school curricula contain significant microbiology-related content as part of the training of future physicians who will be responsible stewards of antimicrobials. Surprisingly, osteopathic and allopathic medical schools do not require pre-medical microbiology coursework, and the extent to which medical students have completed microbiology coursework remains poorly understood. In this report, we show that fewer than 3% of applicants and matriculants to osteopathic medical school (OMS) have completed an undergraduate major or minor in microbiology, and fewer than 17% of applicants and matriculants to OMS have completed one or more microbiology-related courses. These data demonstrate limited pre-medical microbiology-related knowledge among osteopathic medical students, which may be associated with an increase in perceived stress when learning this content or during clinical rotations as well as a potential lack of interest in pursuing a career in infectious diseases.

  7. BOOK REVIEW: Light, Visible and Invisible and its Medical Applications

    Science.gov (United States)

    Newing, Angela

    2000-09-01

    This book is based on various lectures given by Professor Newing over the last few years covering the centenaries of the discovery of x-rays, radioactivity, the electron and radium. It is a splendid follow-up read after studying the more formal presentations in A-level textbooks. The theory of each technique is touched on and the reader is provided with a full list of references for deeper analysis. Intermittently within the text are paragraphs of historical and developmental details, illustrated by contemporary drawings and photographs. These passages, which appear in a different typeface, add greatly to the enjoyment of the book, but could be skipped by an impatient reader seeking to gain an appropriate review knowledge of the subject of medical radiation physics. The areas of physiological measurement and medical engineering are not covered, neither is medical computing. Chapters discuss the diagnostic and therapeutic applications of x-rays. Different methods of scanning are outlined and the appropriateness of techniques brought up-to-date. Treatment with ionizing radiations is expanded to touch on electron radiotherapy, neutron therapy and brachytherapy. Phototherapy and photochemotherapy are considered in the section on treatments using non-ionizing radiations. The story starts with evidence from the ancient worlds of Egypt and Greece, accelerating through the nineteenth and twentieth centuries to the many treatments around today. The laser is shown to be a versatile and exact tool, available in a complete range of wavelengths for different surgical uses. The scientific principles and current applications of nuclear medicine, ultrasound and MRI are described. For each type of procedure, the author includes comments on advantages, disadvantages and operational safety. Dosimetry and quality assurance are touched upon. The book reflects Professor Newing's enthusiasm for her role as a medical physicist both as practitioner and teacher. To any students studying

  8. Organic transistors with high thermal stability for medical applications.

    Science.gov (United States)

    Kuribara, Kazunori; Wang, He; Uchiyama, Naoya; Fukuda, Kenjiro; Yokota, Tomoyuki; Zschieschang, Ute; Jaye, Cherno; Fischer, Daniel; Klauk, Hagen; Yamamoto, Tatsuya; Takimiya, Kazuo; Ikeda, Masaaki; Kuwabara, Hirokazu; Sekitani, Tsuyoshi; Loo, Yueh-Lin; Someya, Takao

    2012-03-06

    The excellent mechanical flexibility of organic electronic devices is expected to open up a range of new application opportunities in electronics, such as flexible displays, robotic sensors, and biological and medical electronic applications. However, one of the major remaining issues for organic devices is their instability, especially their thermal instability, because low melting temperatures and large thermal expansion coefficients of organic materials cause thermal degradation. Here we demonstrate the fabrication of flexible thin-film transistors with excellent thermal stability and their viability for biomedical sterilization processes. The organic thin-film transistors comprise a high-mobility organic semiconductor, dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene, and thin gate dielectrics comprising a 2-nm-thick self-assembled monolayer and a 4-nm-thick aluminium oxide layer. The transistors exhibit a mobility of 1.2 cm(2) V(-1)s(-1) within a 2 V operation and are stable even after exposure to conditions typically used for medical sterilization.

  9. Energy minimization in medical image analysis: Methodologies and applications.

    Science.gov (United States)

    Zhao, Feng; Xie, Xianghua

    2016-02-01

    Energy minimization is of particular interest in medical image analysis. In the past two decades, a variety of optimization schemes have been developed. In this paper, we present a comprehensive survey of the state-of-the-art optimization approaches. These algorithms are mainly classified into two categories: continuous method and discrete method. The former includes Newton-Raphson method, gradient descent method, conjugate gradient method, proximal gradient method, coordinate descent method, and genetic algorithm-based method, while the latter covers graph cuts method, belief propagation method, tree-reweighted message passing method, linear programming method, maximum margin learning method, simulated annealing method, and iterated conditional modes method. We also discuss the minimal surface method, primal-dual method, and the multi-objective optimization method. In addition, we review several comparative studies that evaluate the performance of different minimization techniques in terms of accuracy, efficiency, or complexity. These optimization techniques are widely used in many medical applications, for example, image segmentation, registration, reconstruction, motion tracking, and compressed sensing. We thus give an overview on those applications as well. Copyright © 2015 John Wiley & Sons, Ltd.

  10. An overview on extremity dosimetry in medical applications

    International Nuclear Information System (INIS)

    Vanhavere, F.; Carinou, E.; Donadille, L.; Ginjaume, M.; Jankowski, J.; Rimpler, A.; Sans Merce, M.

    2008-01-01

    Some activities of EURADOS Working Group 9 (WG9) are presently funded by the European Commission (CONRAD project). The objective of WG9 is to promote and co-ordinate research activities for the assessment of occupational exposures to staff at workplaces in interventional radiology (IR) and nuclear medicine. For some of these applications, the skin of the fingers is the limiting organ for individual monitoring of external radiation. Therefore, sub-group 1 of WG9 deals with the use of extremity dosemeters in medical radiation fields. The wide variety of radiation field characteristics present in a medical environment together with the difficulties in measuring a local dose that is representative for the maximum skin dose, usually with one single detector, makes it difficult to perform accurate extremity dosimetry. Sub-group 1 worked out a thorough literature review on extremity dosimetry issues in diagnostic and therapeutic nuclear medicine and positron emission tomography, interventional radiology and interventional cardiology and brachytherapy. Some studies showed that the annual dose limits could be exceeded if the required protection measures are not taken, especially in nuclear medicine. The continuous progress in new applications and techniques requires an important effort in radiation protection and training. (authors)

  11. Hospital electronic medical record enterprise application strategies: do they matter?

    Science.gov (United States)

    Fareed, Naleef; Ozcan, Yasar A; DeShazo, Jonathan P

    2012-01-01

    Successful implementations and the ability to reap the benefits of electronic medical record (EMR) systems may be correlated with the type of enterprise application strategy that an administrator chooses when acquiring an EMR system. Moreover, identifying the most optimal enterprise application strategy is a task that may have important linkages with hospital performance. This study explored whether hospitals that have adopted differential EMR enterprise application strategies concomitantly differ in their overall efficiency. Specifically, the study examined whether hospitals with a single-vendor strategy had a higher likelihood of being efficient than those with a best-of-breed strategy and whether hospitals with a best-of-suite strategy had a higher probability of being efficient than those with best-of-breed or single-vendor strategies. A conceptual framework was used to formulate testable hypotheses. A retrospective cross-sectional approach using data envelopment analysis was used to obtain efficiency scores of hospitals by EMR enterprise application strategy. A Tobit regression analysis was then used to determine the probability of a hospital being inefficient as related to its EMR enterprise application strategy, while moderating for the hospital's EMR "implementation status" and controlling for hospital and market characteristics. The data envelopment analysis of hospitals suggested that only 32 hospitals were efficient in the study's sample of 2,171 hospitals. The results from the post hoc analysis showed partial support for the hypothesis that hospitals with a best-of-suite strategy were more likely to be efficient than those with a single-vendor strategy. This study underscores the importance of understanding the differences between the three strategies discussed in this article. On the basis of the findings, hospital administrators should consider the efficiency associations that a specific strategy may have compared with another prior to moving toward

  12. Access database application in medical treatment management platform

    International Nuclear Information System (INIS)

    Wu Qingming

    2014-01-01

    For timely, accurate and flexible access to medical expenses data, we applied Microsoft Access 2003 database management software, and we finished the establishment of a management platform for medical expenses. By developing management platform for medical expenses, overall hospital costs for medical expenses can be controlled to achieve a real-time monitoring of medical expenses. Using the Access database management platform for medical expenses not only changes the management model, but also promotes a sound management system for medical expenses. (authors)

  13. ELIMED, MEDical and multidisciplinary applications at ELI-Beamlines

    International Nuclear Information System (INIS)

    Schillaci, F; Anzalone, A; Cirrone, G A P; Cuttone, G; Musumarra, A; Pisciotta, P; Romano, F; Romano, F P; Carpinelli, M; Cutroneo, M; De Martinis, C; Giove, D; Korn, G; Maggiore, M; Margarone, D; Manti, L; Perozziello, F M; Petrovic, I; Ristic-Fira, A; Renis, M

    2014-01-01

    ELI-Beamlines is one of the pillars of the pan-European project ELI (Extreme Light Infrastructure). It will be an ultra high-intensity, high repetition-rate, femtosecond laser facility whose main goal is generation and applications of high-brightness X-ray sources and accelerated charged particles in different fields. Particular care will be devoted to the potential applicability of laser-driven ion beams for medical treatments of tumors. Indeed, such kind of beams show very interesting peculiarities and, moreover, laser-driven based accelerators can really represent a competitive alternative to conventional machines since they are expected to be more compact in size and less expensive. The ELIMED project was launched thanks to a collaboration established between FZU-ASCR (ELI-Beamlines) and INFN-LNS researchers. Several European institutes have already shown a great interest in the project aiming to explore the possibility to use laser-driven ion (mostly proton) beams for several applications with a particular regard for medical ones. To reach the project goal several tasks need to be fulfilled, starting from the optimization of laser-target interaction to dosimetric studies at the irradiation point at the end of a proper designed transport beam-line. Researchers from LNS have already developed and successfully tested a high-dispersive power Thomson Parabola Spectrometer, which is the first prototype of a more performing device to be used within the ELIMED project. Also a Magnetic Selection System able to produce a small pencil beam out of a wide energy distribution of ions produced in laser-target interaction has been realized and some preliminary work for its testing and characterization is in progress. In this contribution the status of the project will be reported together with a short description of the of the features of device recently developed.

  14. Smartphone application for mechanical quality assurance of medical linear accelerators

    Science.gov (United States)

    Kim, Hwiyoung; Lee, Hyunseok; In Park, Jong; Choi, Chang Heon; Park, So-Yeon; Kim, Hee Jung; Kim, Young Suk; Ye, Sung-Joon

    2017-06-01

    Mechanical quality assurance (QA) of medical linear accelerators consists of time-consuming and human-error-prone procedures. We developed a smartphone application system for mechanical QA. The system consists of two smartphones: one attached to a gantry for obtaining real-time information on the mechanical parameters of the medical linear accelerator, and another displaying real-time information via a Bluetooth connection with the former. Motion sensors embedded in the smartphone were used to measure gantry and collimator rotations. Images taken by the smartphone’s high-resolution camera were processed to evaluate accuracies of jaw-positioning, crosshair centering and source-to-surface distance (SSD). The application was developed using Android software development kit and OpenCV library. The accuracy and precision of the system was validated against an optical rotation stage and digital calipers, prior to routine QA measurements of five medical linear accelerators. The system accuracy and precision in measuring angles and lengths were determined to be 0.05  ±  0.05° and 0.25  ±  0.14 mm, respectively. The mean absolute errors (MAEs) in QA measurements of gantry and collimator rotation were 0.05  ±  0.04° and 0.05  ±  0.04°, respectively. The MAE in QA measurements of light field was 0.39  ±  0.36 mm. The MAEs in QA measurements of crosshair centering and SSD were 0.40  ±  0.35 mm and 0.41  ±  0.32 mm, respectively. In conclusion, most routine mechanical QA procedures could be performed using the smartphone application system with improved precision and within a shorter time-frame, while eliminating potential human errors.

  15. [Design and application of implantable medical device information management system].

    Science.gov (United States)

    Cao, Shaoping; Yin, Chunguang; Zhao, Zhenying

    2013-03-01

    Through the establishment of implantable medical device information management system, with the aid of the regional joint sharing of resources, we further enhance the implantable medical device traceability management level, strengthen quality management, control of medical risk.

  16. 78 FR 59038 - Mobile Medical Applications; Guidance for Industry and Food and Drug Administration Staff...

    Science.gov (United States)

    2013-09-25

    ... FDA intends to apply its regulatory oversight to only those mobile apps that are medical devices and...] Mobile Medical Applications; Guidance for Industry and Food and Drug Administration Staff; Availability...) is announcing the availability of the guidance entitled ``Mobile Medical Applications.'' The FDA is...

  17. Utilization of research reactors in universities and their medical applications

    International Nuclear Information System (INIS)

    Kanda, Keiji.

    1983-01-01

    In Japan, five research reactors and a critical assembly are operated by the universities. They are opened to all university researchers, the system of which is financially supported by the Ministry of Education, Culture and Science of the Japanese government. Usually KUR is operated eight cycles per year. One cycle consists of the following four week operation: 1. Mainly for researchers from other universities; 2. Mainly for researchers in the institute; 3. Mainly for beam experiment; 4. Sort time experiment. In the weeks of 1 ∼ 3 the KUR is operated continously from Tuesday morning to Friday evening. The experiment include studies on physics, chemistry, biology, medicine, engineering etc. Recently the medical application of research reactors has become popular in Japan. The new technique of the boron neutron capture thereby has been successfully applied to brain tumors and will be to melanoma (skin cancer) in near future. (author)

  18. CAS Accelerators for Medical Applications in Vösendorf, Austria

    CERN Multimedia

    CERN Accelerator School

    2015-01-01

    The CERN Accelerator School (CAS) and MedAustron jointly organised a course on Accelerators for Medical Applications in Vösendorf, Austria between 26 May and 5 June 2015. The course was held at the Eventhotel Pyramide on the outskirts of Vienna, and was attended by 76 participants from 29 countries, coming from as far away as Canada, China, Lithuania, Thailand, Ukraine and Russia.       The intensive programme comprised 37 lectures. The emphasis was on using charged particle beams for cancer therapy and the programme began by covering the way in which particles interact with biological material, how this translates into the dose needed for treatment and how this dose is best delivered. The different accelerator options for providing the particles needed were then presented in some detail. The production of radioisotopes and how these are used for diagnostics and therapy was also covered, together with a look at novel acceleration techniques that may play a role i...

  19. Persistent phosphors for painting, medical and biological applications

    International Nuclear Information System (INIS)

    Nazarov, M.

    2013-01-01

    Multiphase micro and nanoparticle persistent phosphors are synthesized and applied for different fields including painting, medical and biological investigations. A lot of examples show a broad range of applications of persistent luminescence from bulk materials to high tech products, especially in medicine. The development of high efficiency nanosized phosphor makes it possible to propose persistent materials as very good candidates for photodynamic therapy of cancer. An artificial block from slag, concrete, and sand covered with SrAl 2 O 4 :Eu 2+ , Dy 3+ based phosphor is prepared, and a new direction in biology for algae cultivation and artificial reef is discussed. For the first time, underwater luminescence is experimentally studied under real sea conditions. Bright blue-green long-lasting afterglow is registered at a depth of 5 m. The fishes are attracted by the light of the artificial reef. (author)

  20. Biocompatible yogurt carbon dots: evaluation of utilization for medical applications

    Science.gov (United States)

    Dinç, Saliha; Kara, Meryem; Demirel Kars, Meltem; Aykül, Fatmanur; Çiçekci, Hacer; Akkuş, Mehmet

    2017-09-01

    In this study, carbon dots (CDs) were produced from yogurt, a fermented milk product, via microwave-assisted process (800 W) in 30 min without using any additional chemical agents. Yogurt CDs had outstanding nitrogen and oxygen ratios. These dots were monodisperse and about 2 nm sized. The toxicological assessments of yogurt carbon dots in human cancer cells and normal epithelial cells and their fluorescence imaging in living cell system were carried out. Yogurt carbon dots had intense fluorescent signal under confocal microscopy and good fluorescence stability in living cell system. The resulting yogurt carbon dots exhibited high biocompatibility up to 7.1 mg/mL CD concentration which may find utilization in medical applications such as cellular tracking, imaging and drug delivery. Yogurt carbon dots have potential to be good diagnostic agents to visualize cancer cells which may be developed as a therapeutic carrier.

  1. Radiotracers in medical applications, vols 1-2

    International Nuclear Information System (INIS)

    Rayudu, G.V.S.

    1983-01-01

    These volumes will serve as a basis for instruction and reference for professionals such as radiopharmaceutical chemists, radiopharmacologists, radiopharmacists, radiobiochemists, and others involved in the medical applications of radiotracers. Vol. I: Topics include radiohalogenated compounds, including radioiodine; Tc-labeled compounds; and in-house prepared radiopharmaceuticals. The charge particle range vs. energy in every element is tabulated for protons for cyclotrons users. Discussions are also provided on nonimaging radiotracer methods; 11 C, 13 N, 15 O, 67 Ga. 111 In, 75 Se, /SUP 123m/ Te compounds; radioactive noble gases; and miscellaneous radiotracers for imaging. Vol. II: Pertinent nuclear science data such as radiation dosimetry, radionuclide production modes, radionuclides for therapy, human experimentation regulations and consent forms, and radiotracer laboratory designs are presented

  2. Medical beam monitor—Pre-clinical evaluation and future applications

    Science.gov (United States)

    Frais-Kölbl, Helmut; Griesmayer, Erich; Schreiner, Thomas; Georg, Dietmar; Pernegger, Heinz

    2007-10-01

    Future medical ion beam applications for cancer therapy which are based on scanning technology will require advanced beam diagnostics equipment. For a precise analysis of beam parameters we want to resolve time structures in the range of microseconds to nanoseconds. A prototype of an advanced beam monitor was developed by the University of Applied Sciences Wiener Neustadt and its research subsidiary Fotec in co-operation with CERN RD42, Ohio State University and the Jožef Stefan Institute in Ljubljana. The detector is based on polycrystalline Chemical Vapor Deposition (pCVD) diamond substrates and is equipped with readout electronics up to 2 GHz analog bandwidth. In this paper we present the design of the pCVD-detector system and results of tests performed in various particle accelerator based facilities. Measurements performed in clinical high energy photon beams agreed within 1.2% with results obtained by standard ionization chambers.

  3. Medical beam monitor—Pre-clinical evaluation and future applications

    CERN Document Server

    Frais-Kölbl, H; Schreiner, T; Georg, D; Pernegger, H

    2007-01-01

    Future medical ion beam applications for cancer therapy which are based on scanning technology will require advanced beam diagnostics equipment. For a precise analysis of beam parameters we want to resolve time structures in the range of microseconds to nanoseconds. A prototype of an advanced beam monitor was developed by the University of Applied Sciences Wiener Neustadt and its research subsidiary Fotec in co-operation with CERN RD42, Ohio State University and the Jožef Stefan Institute in Ljubljana. The detector is based on polycrystalline Chemical Vapor Deposition (pCVD) diamond substrates and is equipped with readout electronics up to 2 GHz analog bandwidth. In this paper we present the design of the pCVD-detector system and results of tests performed in various particle accelerator based facilities. Measurements performed in clinical high energy photon beams agreed within 1.2% with results obtained by standard ionization chambers.

  4. Impedimetric biosensors for medical applications current progress and challenges

    CERN Document Server

    Rushworth, Jo V; Goode, Jack A; Pike, Douglas J; Ahmed, Asif; Millner, Paul

    2014-01-01

    In this monograph, the authors discuss the current progress in the medical application of impedimetric biosensors, along with the key challenges in the field. First, a general overview of biosensor development, structure and function is presented, followed by a detailed discussion of impedimetric biosensors and the principles of electrochemical impedance spectroscopy. Next, the current state-of-the art in terms of the science and technology underpinning impedance-based biosensors is reviewed in detail. The layer-by-layer construction of impedimetric sensors is described, including the design of electrodes, their nano-modification, transducer surface functionalization and the attachment of different bioreceptors. The current challenges of translating lab-based biosensor platforms into commercially-available devices that function with real patient samples at the POC are presented; this includes a consideration of systems integration, microfluidics and biosensor regeneration. The final section of this monograph ...

  5. A triple GEM gamma camera for medical application

    Energy Technology Data Exchange (ETDEWEB)

    Anulli, F. [Laboratori Nazionali di Frascati INFN, Frascati (Italy); Balla, A. [Laboratori Nazionali di Frascati INFN, Frascati (Italy); Bencivenni, G. [Laboratori Nazionali di Frascati INFN, Frascati (Italy); Corradi, G. [Laboratori Nazionali di Frascati INFN, Frascati (Italy); D' Ambrosio, C. [Laboratori Nazionali di Frascati INFN, Frascati (Italy); Domenici, D. [Laboratori Nazionali di Frascati INFN, Frascati (Italy); Felici, G. [Laboratori Nazionali di Frascati INFN, Frascati (Italy); Gatta, M. [Laboratori Nazionali di Frascati INFN, Frascati (Italy); Morone, M.C. [Dipartimento di Biopatologia e Diagnostica per immagini, Universita di Roma Tor Vergata (Italy); INFN - Sezione di Roma Tor Vergata (Italy); Murtas, F. [Laboratori Nazionali di Frascati INFN, Frascati (Italy)]. E-mail: fabrizio.murtas@lnf.infn.it; Schillaci, O. [Dipartimento di Biopatologia e Diagnostica per immagini, Universita di Roma Tor Vergata (Italy)

    2007-03-01

    A Gamma Camera for medical applications 10x10cm{sup 2} has been built using a triple GEM chamber prototype. The photon converters placed in front of the three GEM foils, has been realized with different technologies. The chamber, High Voltage supplied with a new active divider made in Frascati, is readout through 64 pads, 1mm{sup 2} wide, organized in a row of 8cm long, with LHCb ASDQ chip. This Gamma Camera can be used both for X-ray movie and PET-SPECT imaging; this chamber prototype is placed in a scanner system, creating images of 8x8cm{sup 2}. Several measurements have been performed using phantom and radioactive sources of Tc99m(140keV) and Na22(511keV). Results on spatial resolution and image reconstruction are presented.

  6. Manufacturing radioactive material for medical, research and industrial applications

    International Nuclear Information System (INIS)

    Seidel, C.W.

    1992-01-01

    Hospitals, clinics and other medical complexes are among the most extensive users of radioactive material. Nuclear medicine uses radioactive solutions of Tc-99m, Tl-201, Ga-67, I-123, Xe-133 and other radiopharmaceuticals as diagnostic tools to evaluate dynamic functions of various organs in the body, detect cancerous tumors, sites of infection or other bodily dysfunctions. Examples of monitoring blood flow to the brain of a cocaine addict will be shown. Many different radionuclides are also produced for life science research and industrial applications. Some require long irradiations and are needed only periodically. Radiopharmaceutical manufactures look for reliable suppliers that can produce quality product at a reasonable cost. Worldwide production of the processed and unprocessed radionuclides and the enriched stable nuclides that are the target materials used in the accelerators and reactors around the world will be discussed. (author)

  7. Can We Trust Computational Modeling for Medical Applications?

    Science.gov (United States)

    Mulugeta, Lealem; Walton, Marlei; Nelson, Emily; Myers, Jerry

    2015-01-01

    Operations in extreme environments such as spaceflight pose human health risks that are currently not well understood and potentially unanticipated. In addition, there are limited clinical and research data to inform development and implementation of therapeutics for these unique health risks. In this light, NASA's Human Research Program (HRP) is leveraging biomedical computational models and simulations (M&S) to help inform, predict, assess and mitigate spaceflight health and performance risks, and enhance countermeasure development. To ensure that these M&S can be applied with confidence to the space environment, it is imperative to incorporate a rigorous verification, validation and credibility assessment (VV&C) processes to ensure that the computational tools are sufficiently reliable to answer questions within their intended use domain. In this presentation, we will discuss how NASA's Integrated Medical Model (IMM) and Digital Astronaut Project (DAP) have successfully adapted NASA's Standard for Models and Simulations, NASA-STD-7009 (7009) to achieve this goal. These VV&C methods are also being leveraged by organization such as the Food and Drug Administration (FDA), National Institute of Health (NIH) and the American Society of Mechanical Engineers (ASME) to establish new M&S VV&C standards and guidelines for healthcare applications. Similarly, we hope to provide some insight to the greater aerospace medicine community on how to develop and implement M&S with sufficient confidence to augment medical research and operations.

  8. Fluorine-18-labelled molecules: synthesis and application in medical imaging

    International Nuclear Information System (INIS)

    Dolle, F.; Perrio, C.; Barre, L.; Lasne, M.C.; Le Bars, D.

    2006-01-01

    Positron emission tomography (PET) is one of the more powerful available techniques for medical imaging. It relies on the use of molecules labelled with a positron emitter (β + ). Among those emitters, fluorine-18, available from a cyclotron, is a radionuclide of choice because of its relatively long-half-life (109.8 min) and the relatively low energy of the emitted-positron. The electrophilic form of fluorine-18 ([ 18 F]F 2 or reagents derived from [ 18 F]F 2 ) is mainly used for hydrogen or metal substitutions on aromatic or vinylic carbons. The presence of the stable isotope (fluorine-19) in the radiotracers limits their use in medical imaging. The nucleophilic form of fluorine-18 (alkaline mono-fluoride, K[ 18 F]F, the most used), obtained from irradiation of enriched water, is widely used in aliphatic and (hetero)aromatic substitutions for the synthesis of radiotracers with high specific radioactivity. Some examples of radio-fluorinated tracers used in PET are presented, as well as some of their in vivo applications in human. (authors)

  9. Medical robots in cardiac surgery - application and perspectives.

    Science.gov (United States)

    Kroczek, Karolina; Kroczek, Piotr; Nawrat, Zbigniew

    2017-03-01

    Medical robots offer new standards and opportunities for treatment. This paper presents a review of the literature and market information on the current situation and future perspectives for the applications of robots in cardiac surgery. Currently in the United States, only 10% of thoracic surgical procedures are conducted using robots, while globally this value remains below 1%. Cardiac and thoracic surgeons use robotic surgical systems increasingly often. The goal is to perform more than one hundred thousand minimally invasive robotic surgical procedures every year. A surgical robot can be used by surgical teams on a rotational basis. The market of surgical robots used for cardiovascular and lung surgery was worth 72.2 million dollars in 2014 and is anticipated to reach 2.2 billion dollars by 2021. The analysis shows that Poland should have more than 30 surgical robots. Moreover, Polish medical teams are ready for the introduction of several robots into the field of cardiac surgery. We hope that this market will accommodate the Polish Robin Heart robots as well.

  10. The origins of scientific cinematography and early medical applications.

    Science.gov (United States)

    Barboi, Alexandru C; Goetz, Christopher G; Musetoiu, Radu

    2004-06-08

    To examine the neurologic cinematographic contributions of Gheorghe Marinescu. Near the end of the 19th century, cinematography developed and was immediately recognized as a new technique applicable to medical documentation. After studying with several prominent European neurologists and deeply influenced by Jean-Martin Charcot, Marinescu returned to Bucharest in 1897 and applied moving picture techniques to the study of neurologic patients. The Romanian State Archives were researched for original Marinescu films, and related publications were translated from Romanian and French. Between 1899 and 1902, Marinescu perfected the use of cinematography as a research method in neurosciences and published five articles based on cinematographic documents. He focused his studies particularly on organic gait disorders, locomotor ataxia, and hysteria. He adapted Charcot's method of lining up several patients with the same disorder and showing them together to permit appreciation of archetypes and formes frustes. He decomposed the moving pictures into sequential tracings for publication. He documented treatment results with cases filmed before and after therapy. Processed and digitized excerpts of these films accompany this manuscript. Marinescu's cinematographic studies led to several original contributions in clinical neurology. Remaining film archives include examples of many neurologic diseases, his examination techniques, and the working medical environment of the young founder of the Romanian school of neurology.

  11. Laser Isotope Enrichment for Medical and Industrial Applications

    Energy Technology Data Exchange (ETDEWEB)

    Leonard Bond

    2006-07-01

    Laser Isotope Enrichment for Medical and Industrial Applications by Jeff Eerkens (University of Missouri), Jay Kunze (Idaho State University), and Leonard Bond (Idaho National Laboratory) The principal isotope enrichment business in the world is the enrichment of uranium for commercial power reactor fuels. However, there are a number of other needs for separated isotopes. Some examples are: 1) Pure isotopic targets for irradiation to produce medical radioisotopes. 2) Pure isotopes for semiconductors. 3) Low neutron capture isotopes for various uses in nuclear reactors. 4) Isotopes for industrial tracer/identification applications. Examples of interest to medicine are targets to produce radio-isotopes such as S-33, Mo-98, Mo-100, W-186, Sn-112; while for MRI diagnostics, the non-radioactive Xe-129 isotope is wanted. For super-semiconductor applications some desired industrial isotopes are Si-28, Ga-69, Ge-74, Se-80, Te-128, etc. An example of a low cross section isotope for use in reactors is Zn-68 as a corrosion inhibitor material in nuclear reactor primary systems. Neutron activation of Ar isotopes is of interest in industrial tracer and diagnostic applications (e.g. oil-logging). . In the past few years there has been a sufficient supply of isotopes in common demand, because of huge Russian stockpiles produced with old electromagnetic and centrifuge separators previously used for uranium enrichment. Production of specialized isotopes in the USA has been largely accomplished using old ”calutrons” (electromagnetic separators) at Oak Ridge National Laboratory. These methods of separating isotopes are rather energy inefficient. Use of lasers for isotope separation has been considered for many decades. None of the proposed methods have attained sufficient proof of principal status to be economically attractive to pursue commercially. Some of the authors have succeeded in separating sulfur isotopes using a rather new and different method, known as condensation

  12. Laser Isotope Enrichment for Medical and Industrial Applications

    International Nuclear Information System (INIS)

    Leonard Bond

    2006-01-01

    Laser Isotope Enrichment for Medical and Industrial Applications by Jeff Eerkens (University of Missouri), Jay Kunze (Idaho State University), and Leonard Bond (Idaho National Laboratory) The principal isotope enrichment business in the world is the enrichment of uranium for commercial power reactor fuels. However, there are a number of other needs for separated isotopes. Some examples are: (1) Pure isotopic targets for irradiation to produce medical radioisotopes. (2) Pure isotopes for semiconductors. (3) Low neutron capture isotopes for various uses in nuclear reactors. (4) Isotopes for industrial tracer/identification applications. Examples of interest to medicine are targets to produce radio-isotopes such as S-33, Mo-98, Mo-100, W-186, Sn-112; while for MRI diagnostics, the non-radioactive Xe-129 isotope is wanted. For super-semiconductor applications some desired industrial isotopes are Si-28, Ga-69, Ge-74, Se-80, Te-128, etc. An example of a low cross section isotope for use in reactors is Zn-68 as a corrosion inhibitor material in nuclear reactor primary systems. Neutron activation of Ar isotopes is of interest in industrial tracer and diagnostic applications (e.g. oil-logging). . In the past few years there has been a sufficient supply of isotopes in common demand, because of huge Russian stockpiles produced with old electromagnetic and centrifuge separators previously used for uranium enrichment. Production of specialized isotopes in the USA has been largely accomplished using old ''calutrons'' (electromagnetic separators) at Oak Ridge National Laboratory. These methods of separating isotopes are rather energy inefficient. Use of lasers for isotope separation has been considered for many decades. None of the proposed methods have attained sufficient proof of principal status to be economically attractive to pursue commercially. Some of the authors have succeeded in separating sulfur isotopes using a rather new and different method, known as condensation

  13. Medical Applications of the PHITS Code (3): User Assistance Program for Medical Physics Computation.

    Science.gov (United States)

    Furuta, Takuya; Hashimoto, Shintaro; Sato, Tatsuhiko

    2016-01-01

    DICOM2PHITS and PSFC4PHITS are user assistance programs for medical physics PHITS applications. DICOM2PHITS is a program to construct the voxel PHITS simulation geometry from patient CT DICOM image data by using a conversion table from CT number to material composition. PSFC4PHITS is a program to convert the IAEA phase-space file data to PHITS format to be used as a simulation source of PHITS. Both of the programs are useful for users who want to apply PHITS simulation to verification of the treatment planning of radiation therapy. We are now developing a program to convert dose distribution obtained by PHITS to DICOM RT-dose format. We also want to develop a program which is able to implement treatment information included in other DICOM files (RT-plan and RT-structure) as a future plan.

  14. Medical applications of multi-wire proportional chambers

    International Nuclear Information System (INIS)

    Reading, D.H.

    1976-05-01

    The adaption of Multi-Wire Proportional Chambers (MWPC) for medical applications has necessitated bi-dimensional readout. This is achieved by analysing signals induced onto the cathode planes. At a useful X-ray energy of 40 to 45 keV, just above the K absorption edge in Xenon, the efficiency and resolution are both optimized. Poor resolution events due to K shell fluorescent capture and Auger emission, or L shell photo-electron emission, may be rejected by using energy discrimination - resulting in approximately halving the efficiency to 8% for a 1.6 cm thick atmospheric pressure chamber, but with sub millimeter inherent resolution. This is still far inferior to film resolution, but the MWPC is useful when numbers are required for computation or retrieval. Short descriptions of the MWPC applications to bone density measurements and tomography are given. Its use when pressurized as a gamma camera is discussed, and it is concluded that it may prove useful as a portable special purpose camera, or as one with a very large area thus compensating for low efficiency. Developments with liquid filled chambers are given and also the promising positron imaging hybrid MWPC. (author)

  15. Machine learning for epigenetics and future medical applications.

    Science.gov (United States)

    Holder, Lawrence B; Haque, M Muksitul; Skinner, Michael K

    2017-07-03

    Understanding epigenetic processes holds immense promise for medical applications. Advances in Machine Learning (ML) are critical to realize this promise. Previous studies used epigenetic data sets associated with the germline transmission of epigenetic transgenerational inheritance of disease and novel ML approaches to predict genome-wide locations of critical epimutations. A combination of Active Learning (ACL) and Imbalanced Class Learning (ICL) was used to address past problems with ML to develop a more efficient feature selection process and address the imbalance problem in all genomic data sets. The power of this novel ML approach and our ability to predict epigenetic phenomena and associated disease is suggested. The current approach requires extensive computation of features over the genome. A promising new approach is to introduce Deep Learning (DL) for the generation and simultaneous computation of novel genomic features tuned to the classification task. This approach can be used with any genomic or biological data set applied to medicine. The application of molecular epigenetic data in advanced machine learning analysis to medicine is the focus of this review.

  16. Development of scintillation materials for medical imaging and other applications

    International Nuclear Information System (INIS)

    Melcher, C. L.

    2013-01-01

    Scintillation materials that produce pulses of visible light in response to the absorption of energetic photons, neutrons, and charged particles, are widely used in various applications that require the detection of radiation. The discovery and development of new scintillators has accelerated in recent years, due in large part to their importance in medical imaging as well as in security and high energy physics applications. Better understanding of fundamental scintillation mechanisms as well as the roles played by defects and impurities have aided the development of new high performance scintillators for both gamma-ray and neutron detection. Although single crystals continue to dominate gamma-ray based imaging techniques, composite materials and transparent optical ceramics potentially offer advantages in terms of both synthesis processes and scintillation performance. A number of promising scintillator candidates have been identified during the last few years, and several are currently being actively developed for commercial production. Purification and control of raw materials and cost effective crystal growth processes can present significant challenges to the development of practical new scintillation materials.

  17. Application of Irradiation. Application to polymer processing, exhaust gas treatment, sterilization of medical instruments and food

    Energy Technology Data Exchange (ETDEWEB)

    Sawai, Takeshi; Sawai, Teruko

    2000-03-01

    Many fields such as industry, agriculture, medical treatment and environment use radiation. This report explained some examples of irradiation applications. Radiation source is {sup 60}Co {gamma}-ray. Polymer industry use radiation for radiation curing (thermally stable polymer), tire, expanded polymer, radiation induced graft copolymerization and electron beam curing. On environmental conservation, radiation is used for elimination of NOx and SOx in exhaust combustion gas. In the medical treatment, radiation is applied to sterilization of medical instruments, that occupied about 50% volume, and blood for transfusion, which is only one method to prevent GVHD after transfusion. On agriculture, irradiation to spice, dry vegetable, frozen kitchen, potato and garlic are carried out in 30 countries. However, potato is only a kind food in Japan. Radiation breeding and pest control are put in practice. (S.Y.)

  18. Utilization of smart phones related medical applications among medical students at King Abdulaziz University, Jeddah: A cross-sectional study.

    Science.gov (United States)

    Sayedalamin, Zaid; Alshuaibi, Abdulaziz; Almutairi, Osama; Baghaffar, Mariam; Jameel, Tahir; Baig, Mukhtiar

    The present study explored the utility, attitude, and trends regarding Smartphone related Medical Applications (Apps) among medical students of King Abdulaziz University (KAU) Jeddah, Saudi Arabia (SA) and their perceptions of the impact of Medical Apps in their training activities. This survey was conducted at the Faculty of Medicine, Jeddah, and Rabigh campuses, KAU, Jeddah, SA. All participants were medical students of 2nd to 6th year. The data was collected by using an anonymous questionnaire regarding the perception of medical students about Medical Apps on the smart devices and the purpose of installation of the Apps. Additionally examined was the use of different Medical Apps by the students to investigate the impact of Medical Apps on the clinical training/practice. Data was analyzed on SPSS 21. The opinion of 330/460 medical students from all academic years was included in the study with a response rate of 72%. There were 170 (51.5%) males and 160 (48.5%) females with a mean age of 21.26±1.86 years. Almost all participating students 320 (97%) were well aware of Medical Apps for smart devices and 89.1% had installed different applications on their smart devices. The main usage was for either revision of courses (62.4%) or for looking up of medical information (67.3%), followed by preparing for a presentation (34.5%) and getting the medical news (32.1%). Regarding the impact of Medical Apps, most of the students considered these helpful in clinical decision-making, assisting in differential diagnosis, allowing faster access to Evidence-Based Medical practice, saving time and others. The practical use of these Apps was found to be minimal in medical students. Around 73% were occasional users of Medical Apps, and only 27% were using Medical Apps at least once a day. The regular use of Medical Apps on mobile devices is not common among medical students of KAU. Copyright © 2016 King Saud Bin Abdulaziz University for Health Sciences. Published by Elsevier Ltd

  19. Industrial and medical applications of accelerators with energies less than 20 MeV

    International Nuclear Information System (INIS)

    Duggan, J.L.

    1983-01-01

    In this paper the medical and industrial application of small accelerators is reviewed. Most of the material is taken from the Seventh Conference on the Application of Accelerators in Research and Industry, which was held in Denton, Texas in November of 1982. The areas covered include medical linacs, cyclotron design and production of medical radioisotopes, radiation processing, ion implantation for the metallurgical and semiconductor industries, oil and mineral exploration, trace, surface and bulk analysis, and unique accelerators for all of the above applications

  20. the realities surrounding the applicability of medical paternalism

    African Journals Online (AJOL)

    theories and arguments for and against medical paternalism, this study further ... situations yet the process of medical decision ... Poststgraduate School, Faculty of Law, University of Ilorin, Ilorin, Nigeria. ..... 'patient-centered' medicine now.

  1. Public Use of Mobile Medical Applications: A Case Study on Cloud-Based Medical Service of Taiwan.

    Science.gov (United States)

    Lu, Chen-Luan; Yan, Yu-Hua

    2016-01-01

    The use of smart mobile devices has been getting increasingly popular. The focus of this study is an attempt to explore the development of mobile medical App by medical centers and regional hospitals of Taiwan and the function of the App for comparison. The results show indicated that many hospitals developed Apps for the public for mobile medical service, of which 26 medical centers (100%) and 72 regional hospitals (84.7%) availed appointment making service via Apps. The result indicated variance at significant level (p < 0.01). There are 23 medical centers (88.5%) and 74 regional hospitals (87.1%) availed Apps for checking service progress. The result indicated insignificant variance level (p > 0.01). We can see that mobile medical service is gradually emerging as a vital issue. Yet, this is a new domain in medical service. With the mushrooming of medical applications in smart mobile devices, the medical service system is expected to be installed in these devices to enhance interactive mode of operation and inquiry services, such as medication and inquiries into physical examination results. By then, people can learn the status of their health with this system.

  2. [Application of information management system about medical equipment].

    Science.gov (United States)

    Hang, Jianjin; Zhang, Chaoqun; Wu, Xiang-Yang

    2011-05-01

    Based on the practice of workflow, information management system about medical equipment was developed and its functions such as gathering, browsing, inquiring and counting were introduced. With dynamic and complete case management of medical equipment, the system improved the management of medical equipment.

  3. PBAT based nanocomposites for medical and industrial applications

    International Nuclear Information System (INIS)

    Fukushima, Kikku; Wu, Meng-Hsiu; Bocchini, Sergio; Rasyida, Amaliya; Yang, Ming-Chien

    2012-01-01

    properties as compared to clays. ► Sepiolites show high potential for medical and industrial applications.

  4. PBAT based nanocomposites for medical and industrial applications

    Energy Technology Data Exchange (ETDEWEB)

    Fukushima, Kikku, E-mail: kikku81@gmail.com [Department of Materials Science and Engineering, National Taiwan University of Science and Technology, 43, Sec. 4, Keelung Rd., Taipei 10607, Taiwan (China); Wu, Meng-Hsiu [Department of Materials Science and Engineering, National Taiwan University of Science and Technology, 43, Sec. 4, Keelung Rd., Taipei 10607, Taiwan (China); Bocchini, Sergio [Dipartimento di Scienze dei Materiali ed Ingegneria Chimica, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino (Italy); Rasyida, Amaliya; Yang, Ming-Chien [Department of Materials Science and Engineering, National Taiwan University of Science and Technology, 43, Sec. 4, Keelung Rd., Taipei 10607, Taiwan (China)

    2012-08-01

    good biological safety. Black-Right-Pointing-Pointer Sepiolites brought the higher improvements in PBAT properties as compared to clays. Black-Right-Pointing-Pointer Sepiolites show high potential for medical and industrial applications.

  5. Lasers in medical applications: R and D mapping

    International Nuclear Information System (INIS)

    Deokattey, Sangeeta; Kalyane, V.L.; Kumar, Vijai; Phool Chand

    2001-10-01

    A study of the MEDLINE CDROM database, for the period 1969-2000 was undertaken. The purpose was, to identify core areas of research and development, in the field of applications of lasers to humans, along with other bibliometric indicators of research. A total of 34,833 records were retrieved, downloaded and analysed. The results indicate a steady increase in the number of publications every year, from 1970 onwards, with 1997 (2767 articles) and 1998 (2914 articles) being the most productive years. The most prolific contributors were J. Haut, with 95 publications to his credit, followed by M. Landthaler (82), G. Coscas (79), S.G. Bown (73) and P. Bjerring (70). Collaboration among the authors was high, with a maximum of 15 contributors observed in a few articles. The top ranking journal in the field was Ophthalmology, which published 769 articles starting from 1978. USA was way ahead as the country with the highest journal productivity (around 40% of the total number of records), followed by UK and Germany. A total of 103 articles were published from India. English was the preferred language of publication, with 75% of the records being published in English language. In the use of lasers for humans, maximum number of records were found for adult and middle aged populations. Research focussed on the eye and its various diseases. Lasers were found to be used for therapeutic purposes, in surgery and in the diagnosis of diseases. Carbon dioxide laser was most frequently used for medical applications. Though there were quite a few references on the adverse effects of lasers, the therapeutic effects far outweighed them. (author)

  6. Application of diagnostic reference levels in medical practice

    Energy Technology Data Exchange (ETDEWEB)

    Bourguignon, Michel [Faculty of Medicine of Paris, Deputy Director General, Nuclear Safety Authority (ASN), Paris (France)

    2006-07-01

    Diagnosis reference levels (D.R.L.) are defined in the Council Directive 97/43 EURATOM as 'Dose levels in medical radio diagnosis practices or in the case of radiopharmaceuticals, levels of activity, for typical examinations for groups of standards-sized patients or standards phantoms for broadly defined types of equipment. These levels are expected not to be exceeded for standard procedures when good and normal practice regarding diagnostic and technical performance is applied'. Thus D.R.L. apply only to diagnostic procedures and does not apply to radiotherapy. Radiation protection of patients is based on the application of 2 major radiation protection principles, justification and optimization. The justification principle must be respected first because the best way to protect the patient is not to carry a useless test. Radiation protection of the patient is a continuous process and local dose indicator values in the good range should not prevent the radiologist or nuclear medicine physician to continue to optimize their practice. (N.C.)

  7. Diversity, evolution and medical applications of insect antimicrobial peptides

    Science.gov (United States)

    Mylonakis, Eleftherios; Podsiadlowski, Lars; Muhammed, Maged

    2016-01-01

    Antimicrobial peptides (AMPs) are short proteins with antimicrobial activity. A large portion of known AMPs originate from insects, and the number and diversity of these molecules in different species varies considerably. Insect AMPs represent a potential source of alternative antibiotics to address the limitation of current antibiotics, which has been caused by the emergence and spread of multidrug-resistant pathogens. To get more insight into AMPs, we investigated the diversity and evolution of insect AMPs by mapping their phylogenetic distribution, allowing us to predict the evolutionary origins of selected AMP families and to identify evolutionarily conserved and taxon-specific families. Furthermore, we highlight the use of the nematode Caenorhabditis elegans as a whole-animal model in high-throughput screening methods to identify AMPs with efficacy against human pathogens, including Acinetobacter baumanii and methicillin-resistant Staphylococcus aureus. We also discuss the potential medical applications of AMPs, including their use as alternatives for conventional antibiotics in ectopic therapies, their combined use with antibiotics to restore the susceptibility of multidrug-resistant pathogens, and their use as templates for the rational design of peptidomimetic drugs that overcome the disadvantages of therapeutic peptides. The article is part of the themed issue ‘Evolutionary ecology of arthropod antimicrobial peptides’. PMID:27160593

  8. Learnings From the Pilot Implementation of Mobile Medical Milestones Application.

    Science.gov (United States)

    Page, Cristen P; Reid, Alfred; Coe, Catherine L; Carlough, Martha; Rosenbaum, Daryl; Beste, Janalynn; Fagan, Blake; Steinbacher, Erika; Jones, Geoffrey; Newton, Warren P

    2016-10-01

    Implementation of the educational milestones benefits from mobile technology that facilitates ready assessments in the clinical environment. We developed a point-of-care resident evaluation tool, the Mobile Medical Milestones Application (M3App), and piloted it in 8 North Carolina family medicine residency programs. We sought to examine variations we found in the use of the tool across programs and explored the experiences of program directors, faculty, and residents to better understand the perceived benefits and challenges of implementing the new tool. Residents and faculty completed presurveys and postsurveys about the tool and the evaluation process in their program. Program directors were interviewed individually. Interviews and open-ended survey responses were analyzed and coded using the constant comparative method, and responses were tabulated under themes. Common perceptions included increased data collection, enhanced efficiency, and increased perceived quality of the information gathered with the M3App. Residents appreciated the timely, high-quality feedback they received. Faculty reported becoming more comfortable with the tool over time, and a more favorable evaluation of the tool was associated with higher utilization. Program directors reported improvements in faculty knowledge of the milestones and resident satisfaction with feedback. Faculty and residents credited the M3App with improving the quality and efficiency of resident feedback. Residents appreciated the frequency, proximity, and specificity of feedback, and faculty reported the app improved their familiarity with the milestones. Implementation challenges included lack of a physician champion and competing demands on faculty time.

  9. Diversity, evolution and medical applications of insect antimicrobial peptides.

    Science.gov (United States)

    Mylonakis, Eleftherios; Podsiadlowski, Lars; Muhammed, Maged; Vilcinskas, Andreas

    2016-05-26

    Antimicrobial peptides (AMPs) are short proteins with antimicrobial activity. A large portion of known AMPs originate from insects, and the number and diversity of these molecules in different species varies considerably. Insect AMPs represent a potential source of alternative antibiotics to address the limitation of current antibiotics, which has been caused by the emergence and spread of multidrug-resistant pathogens. To get more insight into AMPs, we investigated the diversity and evolution of insect AMPs by mapping their phylogenetic distribution, allowing us to predict the evolutionary origins of selected AMP families and to identify evolutionarily conserved and taxon-specific families. Furthermore, we highlight the use of the nematode Caenorhabditis elegans as a whole-animal model in high-throughput screening methods to identify AMPs with efficacy against human pathogens, including Acinetobacter baumanii and methicillin-resistant Staphylococcus aureus We also discuss the potential medical applications of AMPs, including their use as alternatives for conventional antibiotics in ectopic therapies, their combined use with antibiotics to restore the susceptibility of multidrug-resistant pathogens, and their use as templates for the rational design of peptidomimetic drugs that overcome the disadvantages of therapeutic peptides.The article is part of the themed issue 'Evolutionary ecology of arthropod antimicrobial peptides'. © 2016 The Authors.

  10. Applications of wavelets in morphometric analysis of medical images

    Science.gov (United States)

    Davatzikos, Christos; Tao, Xiaodong; Shen, Dinggang

    2003-11-01

    Morphometric analysis of medical images is playing an increasingly important role in understanding brain structure and function, as well as in understanding the way in which these change during development, aging and pathology. This paper presents three wavelet-based methods with related applications in morphometric analysis of magnetic resonance (MR) brain images. The first method handles cases where very limited datasets are available for the training of statistical shape models in the deformable segmentation. The method is capable of capturing a larger range of shape variability than the standard active shape models (ASMs) can, by using the elegant spatial-frequency decomposition of the shape contours provided by wavelet transforms. The second method addresses the difficulty of finding correspondences in anatomical images, which is a key step in shape analysis and deformable registration. The detection of anatomical correspondences is completed by using wavelet-based attribute vectors as morphological signatures of voxels. The third method uses wavelets to characterize the morphological measurements obtained from all voxels in a brain image, and the entire set of wavelet coefficients is further used to build a brain classifier. Since the classification scheme operates in a very-high-dimensional space, it can determine subtle population differences with complex spatial patterns. Experimental results are provided to demonstrate the performance of the proposed methods.

  11. High performance graphics processors for medical imaging applications

    International Nuclear Information System (INIS)

    Goldwasser, S.M.; Reynolds, R.A.; Talton, D.A.; Walsh, E.S.

    1989-01-01

    This paper describes a family of high- performance graphics processors with special hardware for interactive visualization of 3D human anatomy. The basic architecture expands to multiple parallel processors, each processor using pipelined arithmetic and logical units for high-speed rendering of Computed Tomography (CT), Magnetic Resonance (MR) and Positron Emission Tomography (PET) data. User-selectable display alternatives include multiple 2D axial slices, reformatted images in sagittal or coronal planes and shaded 3D views. Special facilities support applications requiring color-coded display of multiple datasets (such as radiation therapy planning), or dynamic replay of time- varying volumetric data (such as cine-CT or gated MR studies of the beating heart). The current implementation is a single processor system which generates reformatted images in true real time (30 frames per second), and shaded 3D views in a few seconds per frame. It accepts full scale medical datasets in their native formats, so that minimal preprocessing delay exists between data acquisition and display

  12. Application of diagnostic reference levels in medical practice

    International Nuclear Information System (INIS)

    Bourguignon, Michel

    2006-01-01

    Diagnosis reference levels (D.R.L.) are defined in the Council Directive 97/43 EURATOM as 'Dose levels in medical radio diagnosis practices or in the case of radiopharmaceuticals, levels of activity, for typical examinations for groups of standards-sized patients or standards phantoms for broadly defined types of equipment. These levels are expected not to be exceeded for standard procedures when good and normal practice regarding diagnostic and technical performance is applied'. Thus D.R.L. apply only to diagnostic procedures and does not apply to radiotherapy. Radiation protection of patients is based on the application of 2 major radiation protection principles, justification and optimization. The justification principle must be respected first because the best way to protect the patient is not to carry a useless test. Radiation protection of the patient is a continuous process and local dose indicator values in the good range should not prevent the radiologist or nuclear medicine physician to continue to optimize their practice. (N.C.)

  13. Various dedicated imaging systems for routine nuclear medical applications

    International Nuclear Information System (INIS)

    Bela Kari; Tamas Gyorke; Erno Mako; Laszlo Nagy; Jozsef Turak; Oszkar Partos

    2004-01-01

    The most essential problems of nuclear medical imaging are resolution, signal/noise ratio (S/N) and sensitivity. Nowadays, the vast majority of the Anger system gamma cameras in clinical application are using parallel projection. The main problem of this projection method is the highly dependence of the image quality on the distance from the collimator surface as well as any improvement in the resolution with the distance -i.e. reduction of image blur- significantly reduces sensitivity. The aim of our research and development work was to create imaging geometry, collimator and detector constructions optimized to particular organs (brain, heart, thyroid), where it is simultaneously possible to increase the resolution and sensitivity. Main concept of the imaging geometry construction is based on the size, location and shape of a particular organ. In case of brain SPECT imaging a multiple head (4 heads in cylinder symmetric approximation) arrangement with extra high intrinsic resolution (<2.5 mm) dedicated detector design provide feasible solution for routine clinical application. The imaging system was essentially designed for Tc-99m and I-123 isotopes. The application field can be easily extended for functional small animal research and new born baby studies. Very positive feedbacks were received from both technical (stability and reproducibility of the technical parameters) and clinical sides in the past 2 years routine applications. A unique, novel conception ultra compact dedicated dual head SPECT system has been created only for 2D, 3D nuclear cardiac applications for Tc-99m and T1-201 labeled radio-pharmaceuticals. The two rectangular detectors (with <2.6 mm intrinsic resolution) are mounted fix in 90 degree geometry and move inside the special formed gantry arrangement. The unique and unusual gantry is designed to keep the detector heads as close as possible to the patient, while the patient is not exposed by any moving part. This special construction also

  14. 77 FR 13967 - Notice of Intent To Discontinue Use of Paper Applications for Airman Medical Certification

    Science.gov (United States)

    2012-03-08

    ... also in terms of the complex logistics and use of Agency resources involved. This burden becomes all... to record the results of the applicant's medical examination on the reverse side of application form...

  15. 21 CFR 515.20 - Approval of medicated feed mill license applications.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Approval of medicated feed mill license... SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS MEDICATED FEED MILL LICENSE Administrative Actions on Licenses § 515.20 Approval of medicated feed mill license applications. Within 90 days after an...

  16. 21 CFR 515.21 - Refusal to approve a medicated feed mill license application.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Refusal to approve a medicated feed mill license... SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS MEDICATED FEED MILL LICENSE Administrative Actions on Licenses § 515.21 Refusal to approve a medicated feed mill license application. (a) The...

  17. Design and Evaluation of a Medication Adherence Application with Communication for Seniors in Independent Living Communities.

    Science.gov (United States)

    Dasgupta, Dipanwita; Johnson, Reid A; Chaudhry, Beenish; Reeves, Kimberly G; Willaert, Patty; Chawla, Nitesh V

    2016-01-01

    Medication non-adherence is a pressing concern among seniors, leading to a lower quality of life and higher healthcare costs. While mobile applications provide a viable medium for medication management, their utility can be limited without tackling the specific needs of seniors and facilitating the active involvement of care providers. To address these limitations, we are developing a tablet-based application designed specifically for seniors to track their medications and a web portal for their care providers to track medication adherence. In collaboration with a local Aging in Place program, we conducted a three-month study with sixteen participants from an independent living facility. Our study found that the application helped participants to effectively track their medications and improved their sense of wellbeing. Our findings highlight the importance of catering to the needs of seniors and of involving care providers in this process, with specific recommendations for the development of future medication management applications.

  18. Summaries of fiscal year 1994 projects in medical applications and biophysical research

    International Nuclear Information System (INIS)

    1995-04-01

    This report provides information on the research supported in Fiscal Year 1994 by the Medical Applications and Biophysical Research Division of the Office of Health and Environmental Research. A brief statement of the scope of the following areas is presented: dosimetry; measurement science; radiological and chemical physics; structural biology; human genome; and medical applications. Summaries of the research projects in these categories are presented

  19. 28 CFR 552.26 - Medical attention in use of force and application of restraints incidents.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Medical attention in use of force and application of restraints incidents. 552.26 Section 552.26 Judicial Administration BUREAU OF PRISONS... § 552.26 Medical attention in use of force and application of restraints incidents. (a) In immediate use...

  20. Generation of high brightness x-ray source and its medical applications

    International Nuclear Information System (INIS)

    Fujii, Sadao; Muro, Mikio; Oku, Yasunari; Daido, Hiroyuki; Takahashi, Kenjiro

    2001-01-01

    Laser produced plasmas are one of the most feasible sources to be used for industrial applications, especially medical applications: Angiography, Protein crystallography, X-ray microscopy and XAFS. In the present paper, laser requirements are clarified for the medical and life science fields and then we estimate both the photon energy spectra and the number of photons based on Monte-Carlo simulation. (author)

  1. Systematic review on the effectiveness of augmented reality applications in medical training

    NARCIS (Netherlands)

    Barsom, E. Z.; Graafland, M.; Schijven, M. P.

    2016-01-01

    Computer-based applications are increasingly used to support the training of medical professionals. Augmented reality applications (ARAs) render an interactive virtual layer on top of reality. The use of ARAs is of real interest to medical education because they blend digital elements with the

  2. Advanced CerMet ceramic composites for medical applications.

    Science.gov (United States)

    Dittmer, Robert; Schaefer, Christian M; Fischer, Jean-Francois; Hausch, Ulrich; Troetzschel, Jens; Specht, Heiko

    2017-11-01

    Implantable active devices such as pacemakers are facing rigorous requirements. Because they reside within the body for years, materials applied in this surrounding must exhibit biocompatibility and extraordinary reliability. They also have to provide a number of functional properties. In this work we present a method that enables the realization of a highly complex profile of properties by means of a dual composite approach. Using multilayer technology, an electrical conductor is embedded into a ceramic matrix, thus, creating conductive paths that are insulated from each other. In addition to this macroscopically hybrid architecture, this approach features a second composite aspect: the conductor is not composed of a single metallic phase, but is a ceramic-metal mixture. Owing to its interpenetrating microstructure, this CerMet allows for a strong and hermetic integration of the conductor into the ceramic matrix otherwise impossible due to mismatch in thermal expansion. In fact, the CerMet ceramic composite exhibits a higher strength than the pure ceramic as revealed by a three-point bending test study. At the same time, the CerMet offers high and virtually metal-like conductor properties, enabling a down-scaling of the conductive paths to 150µm diameter and smaller. Furthermore, the described composite is biocompatible, non-magnetic, and chemically inert, which is vital for the application in active, implantable, medical devices. Beside the general fabrication route, we present the microstructural, functional, and mechanical properties of this newly developed class of dual composites. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Si and gaas pixel detectors for medical imaging applications

    International Nuclear Information System (INIS)

    Bisogni, M. G.

    2001-01-01

    As the use of digital radiographic equipment in the morphological imaging field is becoming the more and more diffuse, the research of new and more performing devices from public institutions and industrial companies is in constant progress. Most of these devices are based on solid-state detectors as X-ray sensors. Semiconductor pixel detectors, originally developed in the high energy physics environment, have been then proposed as digital detector for medical imaging applications. In this paper a digital single photon counting device, based on silicon and GaAs pixel detector, is presented. The detector is a thin slab of semiconductor crystal where an array of 64 by 64 square pixels, 170- m side, has been built on one side. The data read-out is performed by a VLSI integrated circuit named Photon Counting Chip (PCC), developed within the MEDIPIX collaboration. Each chip cell geometrically matches the sensor pixel. It contains a charge preamplifier, a threshold comparator and a 15 bits pseudo-random counter and it is coupled to the detector by means of bump bonding. Most important advantages of such system, with respect to a traditional X-rays film/screen device, are the wider linear dynamic range (3x104) and the higher performance in terms of MTF and DQE. Besides the single photon counting architecture allows to detect image contrasts lower than 3%. Electronics read-out performance as well as imaging capabilities of the digital device will be presented. Images of mammographic phantoms acquired with a standard Mammographic tube will be compared with radiographs obtained with traditional film/screen systems

  4. A flexible model for correlated medical costs, with application to medical expenditure panel survey data.

    Science.gov (United States)

    Chen, Jinsong; Liu, Lei; Shih, Ya-Chen T; Zhang, Daowen; Severini, Thomas A

    2016-03-15

    We propose a flexible model for correlated medical cost data with several appealing features. First, the mean function is partially linear. Second, the distributional form for the response is not specified. Third, the covariance structure of correlated medical costs has a semiparametric form. We use extended generalized estimating equations to simultaneously estimate all parameters of interest. B-splines are used to estimate unknown functions, and a modification to Akaike information criterion is proposed for selecting knots in spline bases. We apply the model to correlated medical costs in the Medical Expenditure Panel Survey dataset. Simulation studies are conducted to assess the performance of our method. Copyright © 2015 John Wiley & Sons, Ltd.

  5. Teleworks: a CSCW application for remote medical diagnosis support and teleconsultation.

    Science.gov (United States)

    Makris, L; Kamilatos, I; Kopsacheilis, E V; Strintzis, M G

    1998-06-01

    The present paper describes methods for the design of both synchronous and asynchronous computer-supported cooperative work (CSCW) procedures suitable for the medical application area and specifically for the purpose of medical teleconsultation and remote diagnosis support. The experimental implementation of a CSCW system built upon a PC/Windows platform is detailed as an example of a low-cost system suitable for adoption in a wide range of medical teleconsultation applications.

  6. [Research on the Application of Lean Management in Medical Consumables Material Logistics Management].

    Science.gov (United States)

    Yang, Chai; Zhang, Wei; Gu, Wei; Shen, Aizong

    2016-11-01

    Solve the problems of high cost, low utilization rate of resources, low medical care quality problem in medical consumables material logistics management for scientific of medical consumables management. Analysis of the problems existing in the domestic medical consumables material logistics management in hospital, based on lean management method, SPD(Supply, Processing, Distribution) for specific applications, combined HBOS(Hospital Business Operation System), HIS (Hospital Information System) system for medical consumables material management. Achieve the lean management in medical consumables material purchase, warehouse construction, push, clinical use and retrospect. Lean management in medical consumables material can effectively control the cost in logistics management, optimize the alocation of resources, liberate unnecessary time of medical staff, improve the quality of medical care. It is a scientific management method.

  7. Proposed medical applications of the National Accelerator Centre facilities

    International Nuclear Information System (INIS)

    Jones, D.T.L.

    1982-01-01

    The National Accelerator Centre is at present under construction at Faure, near Cape Town. The complex will house a 200 MeV separated-sector cyclotron which will provide high quality beams for nuclear physics and related diciplines as well as high intensity beams for medical use. The medical aspects catered for will include particle radiotherapy, isotope production and possibly proton radiography. A 30-bed hospital is to be constructed on the site. Building operations are well advanced and the medical facilities should be available for use by the end of 1984

  8. Medical judgement analogue studies with applications to spaceflight crew medical officer.

    Science.gov (United States)

    McCarroll, Michele L; Ahmed, Rami A; Schwartz, Alan; Gothard, Michael David; Atkinson, Steven Scott; Hughes, Patrick; Brito, Jose Cepeda; Assad, Lori; Myers, Jerry; George, Richard L

    2017-10-01

    The National Aeronautics and Space Administration (NASA) developed plans for potential emergency conditions from the Exploration Medical Conditions List. In an effort to mitigate conditions on the Exploration Medical Conditions List, NASA implemented a crew medical officer (CMO) designation for eligible astronauts. This pilot study aims to add knowledge that could be used in the Integrated Medical Model. An analogue population was recruited for two categories: administrative physicians (AP) representing the physician CMOs and technical professionals (TP) representing the non-physician CMOs. Participants completed four medical simulations focused on abdominal pain: cholecystitis (CH) and renal colic (RC) and chest pain: cardiac ischaemia (STEMI; ST-segment elevation myocardial infarction) and pneumothorax (PX). The Medical Judgment Metric (MJM) was used to evaluate medical decision making. There were no significant differences between the AP and TP groups in age, gender, race, ethnicity, education and baseline heart rate. Significant differences were noted in MJM average rater scores in AP versus TP in CH: 13.0 (±2.25), 4.5 (±0.48), p=<0.001; RC: 12.3 (±2.66), 4.8 (±0.94); STEMI: 12.1 (±3.33), 4.9 (±0.56); and PX: 13.5 (±2.53), 5.3 (±1.01), respectively. There could be a positive effect on crew health risk by having a physician CMO. The MJM demonstrated the ability to quantify medical judgement between the two analogue groups of spaceflight CMOs. Future studies should incorporate the MJM in a larger analogue population study to assess the medical risk for spaceflight crewmembers.

  9. [Study of the Application of Mobile Medical Technology in Construction of Grading Diagnosis and Treatment System].

    Science.gov (United States)

    Zhu, Wenwu; Shen, Yihong; Zhen, Hui; Yang, Xiaohe; Hu, Kai

    2018-02-08

    The combination of mobile medical technology and the grading diagnosis and treatment system (GDTS) can stimulate the allocation of medical resources, reduce medical cost and improve public health significantly. Firstly we summarize development features of mobile medical technology in foreign and domestic market, then we study the application model of mobile medical application in GDTS with field research data and analyzes its advantage and shortage. Finally, we propose four measures for further developing mobile medical application in the GDTS:the government departments should formulate policies and industry standards of products as soon as possible to meet requirement of market; service providers should take the hospitals as core role to achieve mutual benefit and win-win situation; take the daily monitoring of chronic diseases as an entry point to build profitable business model; enhance publicity to promote public health awareness.

  10. 15 year experience of tacrolimus application in medical practice

    Directory of Open Access Journals (Sweden)

    Y. S. Kondratyeva

    2016-01-01

    Full Text Available The review presents modern literature data on the use of tacrolimus in medical practice. The results of national and international research on the effectiveness and safety of the drug at various dermatoses are presented.

  11. Optical fiber sensors for medical applications: practical engineering considerations

    NARCIS (Netherlands)

    Heijmans, J.A.C.; Cheng, L.K.; Wieringa, F.P.

    2008-01-01

    The advantages of optical fibers as medical sensors are recognized world wide nowadays. Insensitivity to electromagnetic disturbances and relative small dimensions are the most well known properties. The advantages of fiber optic sensors are especially valuable within environments with high

  12. Accelerator for medical applications and electron acceleration by laser plasma

    International Nuclear Information System (INIS)

    Hosokai, Tomonao; Uesaka, Mitsuru

    2006-01-01

    In this article, the current status of radiation therapies in Japan and updated medical accelerators are reviewed. For medical use, there is a strong demand of a compact and flexible accelerator. At present, however, we have only two choices of the S-band linac with one or two rotation axis combined with the multi leaf collimator, or the X-band linac with a rather flexible robotic arm. In addition, the laser plasma cathode that is the second generation of the laser wake-field accelerator (LWFA) is studied as a high-quality electron source for medical use though it is still at the stage of the basic research. The potential of LWFA as medical accelerator near future is discussed based on updated results of laser plasma cathode experiment in Univ. of Tokyo. (author)

  13. The Efficacy, Safety and Applications of Medical Hypnosis.

    Science.gov (United States)

    Häuser, Winfried; Hagl, Maria; Schmierer, Albrecht; Hansen, Ernil

    2016-04-29

    The efficacy and safety of hypnotic techniques in somatic medicine, known as medical hypnosis, have not been supported to date by adequate scientific evidence. We systematically reviewed meta-analyses of randomized controlled trials (RCTs) of medical hypnosis. Relevant publications (January 2005 to June 2015) were sought in the Cochrane databases CDSR and DARE, and in PubMed. Meta-analyses involving at least 400 patients were included in the present analysis. Their methodological quality was assessed with AMSTAR (A Measurement Tool to Assess Systematic Reviews). An additional search was carried out in the CENTRAL and PubMed databases for RCTs of waking suggestion (therapeutic suggestion without formal trance induction) in somatic medicine. Out of the 391 publications retrieved, five were reports of metaanalyses that met our inclusion criteria. One of these meta-analyses was of high methodological quality; three were of moderate quality, and one was of poor quality. Hypnosis was superior to controls with respect to the reduction of pain and emotional stress during medical interventions (34 RCTs, 2597 patients) as well as the reduction of irritable bowel symptoms (8 RCTs, 464 patients). Two meta-analyses revealed no differences between hypnosis and control treatment with respect to the side effects and safety of treatment. The effect size of hypnosis on emotional stress during medical interventions was low in one meta-analysis, moderate in one, and high in one. The effect size on pain during medical interventions was low. Five RCTs indicated that waking suggestion is effective in medical procedures. Medical hypnosis is a safe and effective complementary technique for use in medical procedures and in the treatment of irritable bowel syndrome. Waking suggestions can be a component of effective doctor-patient communication in routine clinical situations.

  14. Medical physics. The application of physics to medicine

    International Nuclear Information System (INIS)

    Ka Weibo

    2002-01-01

    Physics has been applied to medicine for several hundred years, and has greatly spurred the development of medical science. Two important examples are medical imaging and radiation oncology. A review of the state-of-the-art of these two fields is presented for physicists. The combination of physics and medicine has not only provided advanced techniques for clinical diagnosis and treatment but has also advanced physics itself

  15. Application of Computer Simulation Modeling to Medication Administration Process Redesign

    OpenAIRE

    Huynh, Nathan; Snyder, Rita; Vidal, Jose M.; Tavakoli, Abbas S.; Cai, Bo

    2012-01-01

    The medication administration process (MAP) is one of the most high-risk processes in health care. MAP workflow redesign can precipitate both unanticipated and unintended consequences that can lead to new medication safety risks and workflow inefficiencies. Thus, it is necessary to have a tool to evaluate the impact of redesign approaches in advance of their clinical implementation. This paper discusses the development of an agent-based MAP computer simulation model that can be used to assess...

  16. Telelearning standards and their application in medical education.

    Science.gov (United States)

    Duplaga, Mariusz; Juszkiewicz, Krzysztof; Leszczuk, Mikolaj

    2004-01-01

    Medial education, both on the graduate and postgraduate levels, has become a real challenge nowadays. The volume of information in medical sciences grows so rapidly that many health professionals experience essential problems in keeping track of the state of the art in this domain. e-learning offers important advantages to medical education continuation due to its universal availability and opportunity for implementation of flexible patterns of training. An important trace of medical education is developing practical skills. Some examples of standardization efforts include: the CEN/ISSS Workshop on Learning Technology (WSLT), the Advanced Learning Infrastructure Consortium (ALIC), Education Network Australia (EdNA) and PROmoting Multimedia access to Education and Training in European Society (PROMETEUS). Sun Microsystems' support (Sun ONE, iPlanetTM ) for many of the above-mentioned standards is described as well. Development of a medical digital video library with recordings of invasive procedures incorporating additional information and commentary may improve the efficiency of the training process in interventional medicine. A digital video library enabling access to videos of interventional procedures performed in the area of thoracic medicine may be a valuable element for developing practical skills. The library has been filled with video resources recorded at the Department of Interventional Pulmonology; it enhances training options for pulmonologists and thoracic surgeons. The main focus was put on demonstration of bronchofiberoscopic and videothoracoscopic procedures. The opportunity to browse video recordings of procedures performed in the specific field also considerably enhances the options for training in other medical specialties. In the era of growing health consumer awareness, patients are also perceived as the target audience for medical digital libraries. As a case study of Computer-Based Training systems, the Medical Digital Video Library is

  17. [Application of advanced engineering technologies to medical and rehabilitation fields].

    Science.gov (United States)

    Fujie, Masakatsu

    2012-07-01

    The words "Japan syndrome" can now be heard increasingly through the media. Facing the approach of an elderly-dominated society, Robot Technology(RT)is expected to play an important role in Japan's medical, rehabilitation, and daily support fields. The industrial robot, which has already spread through the world with a great success in certain isolated environments by doing the work which is specialized for the thing with the hard known characteristic. By comparison, in the medical and rehabilitation fields, environments always change intricately, and individual characteristics differ from person to person. Furthermore, there are many times when a robot will be asked to directly interact with people. Moreover, the relation between a robot and a person turns into a relation which should involve contact flexibly according to a situation, and also turns into a relation which should avoid contact. In our group, we have so far developed practical rehabilitation and medical robots which can respond to difficulties such as environmental change and individual specificity. In developing rehabilitation robots, it is especially important to consider intuitive operability and individual differences. In addition, in developing medical robots, it is important to replace the experimental knowledge of surgeons to the mechanical quantitative properties. In this article, we introduce some practical examples of rehabilitation and medical robots interweaving several detailed technologies we have so far developed.

  18. [Mobile phone-computer wireless interactive graphics transmission technology and its medical application].

    Science.gov (United States)

    Huang, Shuo; Liu, Jing

    2010-05-01

    Application of clinical digital medical imaging has raised many tough issues to tackle, such as data storage, management, and information sharing. Here we investigated a mobile phone based medical image management system which is capable of achieving personal medical imaging information storage, management and comprehensive health information analysis. The technologies related to the management system spanning the wireless transmission technology, the technical capabilities of phone in mobile health care and management of mobile medical database were discussed. Taking medical infrared images transmission between phone and computer as an example, the working principle of the present system was demonstrated.

  19. Emerging applications of fluorescence spectroscopy in medical microbiology field.

    Science.gov (United States)

    Shahzad, Aamir; Köhler, Gottfried; Knapp, Martin; Gaubitzer, Erwin; Puchinger, Martin; Edetsberger, Michael

    2009-11-26

    There are many diagnostic techniques and methods available for diagnosis of medically important microorganisms like bacteria, viruses, fungi and parasites. But, almost all these techniques and methods have some limitations or inconvenience. Most of these techniques are laborious, time consuming and with chances of false positive or false negative results. It warrants the need of a diagnostic technique which can overcome these limitations and problems. At present, there is emerging trend to use Fluorescence spectroscopy as a diagnostic as well as research tool in many fields of medical sciences. Here, we will critically discuss research studies which propose that Fluorescence spectroscopy may be an excellent diagnostic as well as excellent research tool in medical microbiology field with high sensitivity and specificity.

  20. Emerging applications of fluorescence spectroscopy in medical microbiology field

    Directory of Open Access Journals (Sweden)

    Gaubitzer Erwin

    2009-11-01

    Full Text Available Abstract There are many diagnostic techniques and methods available for diagnosis of medically important microorganisms like bacteria, viruses, fungi and parasites. But, almost all these techniques and methods have some limitations or inconvenience. Most of these techniques are laborious, time consuming and with chances of false positive or false negative results. It warrants the need of a diagnostic technique which can overcome these limitations and problems. At present, there is emerging trend to use Fluorescence spectroscopy as a diagnostic as well as research tool in many fields of medical sciences. Here, we will critically discuss research studies which propose that Fluorescence spectroscopy may be an excellent diagnostic as well as excellent research tool in medical microbiology field with high sensitivity and specificity.

  1. Medical simulation: Overview, and application to wound modelling and management

    Directory of Open Access Journals (Sweden)

    Dinker R Pai

    2012-01-01

    Full Text Available Simulation in medical education is progressing in leaps and bounds. The need for simulation in medical education and training is increasing because of a overall increase in the number of medical students vis-à-vis the availability of patients; b increasing awareness among patients of their rights and consequent increase in litigations and c tremendous improvement in simulation technology which makes simulation more and more realistic. Simulation in wound care can be divided into use of simulation in wound modelling (to test the effect of projectiles on the body and simulation for training in wound management. Though this science is still in its infancy, more and more researchers are now devising both low-technology and high-technology (virtual reality simulators in this field. It is believed that simulator training will eventually translate into better wound care in real patients, though this will be the subject of further research.

  2. Medical simulation: Overview, and application to wound modelling and management.

    Science.gov (United States)

    Pai, Dinker R; Singh, Simerjit

    2012-05-01

    Simulation in medical education is progressing in leaps and bounds. The need for simulation in medical education and training is increasing because of a) overall increase in the number of medical students vis-à-vis the availability of patients; b) increasing awareness among patients of their rights and consequent increase in litigations and c) tremendous improvement in simulation technology which makes simulation more and more realistic. Simulation in wound care can be divided into use of simulation in wound modelling (to test the effect of projectiles on the body) and simulation for training in wound management. Though this science is still in its infancy, more and more researchers are now devising both low-technology and high-technology (virtual reality) simulators in this field. It is believed that simulator training will eventually translate into better wound care in real patients, though this will be the subject of further research.

  3. Application of Computer Simulation Modeling to Medication Administration Process Redesign

    Directory of Open Access Journals (Sweden)

    Nathan Huynh

    2012-01-01

    Full Text Available The medication administration process (MAP is one of the most high-risk processes in health care. MAP workflow redesign can precipitate both unanticipated and unintended consequences that can lead to new medication safety risks and workflow inefficiencies. Thus, it is necessary to have a tool to evaluate the impact of redesign approaches in advance of their clinical implementation. This paper discusses the development of an agent-based MAP computer simulation model that can be used to assess the impact of MAP workflow redesign on MAP performance. The agent-based approach is adopted in order to capture Registered Nurse medication administration performance. The process of designing, developing, validating, and testing such a model is explained. Work is underway to collect MAP data in a hospital setting to provide more complex MAP observations to extend development of the model to better represent the complexity of MAP.

  4. Podcasting as a novel way to communicate with medical school applicants.

    Science.gov (United States)

    Ferguson, Benjamin D; Bister, Mary K; Krapec, Joni N

    2014-09-01

    Podcasting in medical education is becoming more widely used and may be a useful tool for communicating with applicants to medical school. Given recent trends in the popularity of podcasting and mobile media, we created a podcast to communicate more effectively with applicants to our medical school as well as with the broader premedical community. The purpose of this study was to characterize the listening habits and motivations of our audience and compare the podcast's benefits to those of other resources. We additionally sought to understand patterns by which our podcast was consumed by a premedical audience. We surveyed medical school applicants who interviewed at the University of Chicago Pritzker School of Medicine for matriculation in 2013. Forty-one percent of those surveyed had listened to the podcast prior to their interview. Only 12 % of listeners accessed the podcast using a mobile device. Ninety-two percent of listeners felt that it faithfully represented the medical school, and 81 % felt that listening would encourage the decision to matriculate. A majority of listeners responded that the podcast was more helpful than other traditional resources. This is the first use of podcasting in medical school admissions and represents a novel way to communicate with prospective students. Our findings demonstrate that podcasting can be an effective tool for communicating with applicants to medical school and highlight its usefulness in recruitment. This method of communication could be adopted by other medical schools to enhance the ways in which they inform their own prospective medical students.

  5. Perception Towards the Use of Smartphone Application (Apps to Enhance Medication Adherence Among Saudi Pediatrics

    Directory of Open Access Journals (Sweden)

    Renad Alsalamah

    2018-03-01

    Full Text Available Objectives: The aim of this study was to measure the importance of smartphone applications (Apps in medication adherence in children to help parents and caregivers in giving medication to children to maintain a good health and quality of life, and to improve current clinical practices in adherence to medications among Saudi pediatrics. Methodology: Cross sectional survey to Saudi Arabia population was conducted from March to April 2017(n=405. Data were collected, tabulated and analyzed using Survey Monkey. We present design requirements for building medication reminders that support the routine aspect of medication-taking by linking children’s concerns, (such as games on taking medications at time. Results: Of the 405 survey participants, the majority of participants 72.5% were not aware by applications of smart device that make easier to take medicines regularly. Eighty percent of participants preferred a mobile app to help their children take the medicine easily and regularly, and 39.8% of them thought that the child will interact with this game, the majority of them 88.6% don’t have any obstacle hinders the use of these updated applications. Fifty percent of them will encourage young patients, to use such applications (App to help them in their medication adherence. Conclusion: Nonadherence to medication is still represents a fundamental health care challenge. The presence of an application makes it easier for parents to give medication to their sick children. Most children love playing games, there is a high probability of their attachment to this application (App and it will promote children’s medication adherence. Key words: Patient adherence, Pediatric, Smartphone, Applications, Apps.

  6. Application essays and future performance in medical school: are they related?

    Science.gov (United States)

    Dong, Ting; Kay, Allen; Artino, Anthony R; Gilliland, William R; Waechter, Donna M; Cruess, David; DeZee, Kent J; Durning, Steven J

    2013-01-01

    There is a paucity of research on whether application essays are a valid indicator of medical students' future performance. The goal is to score medical school application essays systematically and examine the correlations between these essay scores and several indicators of student performance during medical school and internship. A journalist created a scoring rubric based on the journalism literature and scored 2 required essays of students admitted to our university in 1 year (N = 145). We picked 7 indicators of medical school and internship performance and correlated these measures with overall essay scores: preclinical medical school grade point average (GPA), clinical medical school GPA, cumulative medical school GPA, U.S. Medical Licensing Exam (USMLE) Step 1 and 2 scores, and scores on a program director's evaluation measuring intern professionalism and expertise. We then examined the Pearson and Spearman correlations between essay scores and the outcomes. Essay scores did not vary widely. American Medical College Application Service essay scores ranged from 3.3 to 4.5 (M = 4.11, SD = 0.15), and Uniformed Services University of the Health Sciences essay scores ranged from 2.9 to 4.5 (M = 4.09, SD = 0.17). None of the medical school or internship performance indicators was significantly correlated with the essay scores. These findings raise questions about the utility of matriculation essays, a resource-intensive admission requirement.

  7. The Medical Microrobot Control System Design via Fuzzy Logic Application

    Directory of Open Access Journals (Sweden)

    A. S. Yuschenko

    2014-01-01

    Full Text Available The aim of the investigation is the development of the instruments and technologies for diagnostics and treatment of tube-like human’s organs such as blood vessels and intestines. The medical microrobots may be applied to move along the tube-like organs by the same way as a worm. Such microrobots had been presented in some works in Russia and abroad among them is a project of BMSTU. The control system of the robot has to adapt the movement process to the peculiarity of the biology environment. The safety of the application of robotic device inside the human body is the main requirement to the construction.An experimental model of microrobot has three segments which contracting successively to ensure progressive movement of the device. The diameter of the robot is smaller than the same of the blood vessel. So it is pressed to the internal cover of the vessel by the special planes to avoid the thrombosis of the vessel. Every segment of robot contain three contact elements, pressure sensors and a regulator to control the pressure of the elements to the internal surface of the vessel. Aboard the robot is a micro-video camera has been mounted to inform the surgeon of the situation inside the vessel and other micro-devices. The supporting plates carry tens metric sensors to control the contact forces. The driver of the robot is of hydraulic type with physiologic solution to avoid the danger of embolism.Microrobot is a part of the robotic system including also a hydro-driver mounted in the stationary part of the system and intelligent interface of the operator. The surgeon-operator has opportunity to observe the inner surface of the vessel by the sensors mounted aboard the robot and to control the robot movement along the vessel. The construction of the microrobot has to guarantee the stable position of the robot in the moving blood flow and its movement inside the vessel without any damage of the inner surface.The peculiarity of the microrobot

  8. [Assessment of two applications of medication self-management in older patients. Qualitative study].

    Science.gov (United States)

    Carrillo, I; Guilabert, M; Pérez-Jover, V; Mira, J J

    2015-01-01

    The aging population and the growing use of technology are two realities of modern society. Developing tools to support medication self-management to polymedicated elderly may contribute to increase their safety. To know how patients polymedicated and older than 64 years manage dose their medication and assessment the utility of two medication self-management applications, specifically analyzing management systems, medication errors and positive and improvable aspects of each of the tools presented. Seven focal groups with 59 patients from associations and health departments were conducted. In such meetings, they received the applications and they were encouraged to use it. Then, a several group questions were asked them about their health status, how they managed their medication and their assessment about the applications. Most participants reported to use memory strategies to take correctly their medication. They assessed positively the applications although some of them showed resistance to incorporate it in their daily routine. The simple interface and ease of use were the characteristics of the applications most appreciated by patients. Is possible to foster among elderly patients the use of technological tools to support the proper administration of medications with purpose is to decrease errors and increase safety. When designing health applications is necessary to take into account the preferences of those who are targeted. Copyright © 2014 SECA. Published by Elsevier Espana. All rights reserved.

  9. Textile slow-release systems with medical applications

    NARCIS (Netherlands)

    ten Breteler, M.R.; Nierstrasz, Vincent; Warmoeskerken, Marinus

    2002-01-01

    In the development of medical drug delivery systems, attention has been increasingly focused on slow- or controlled delivery systems in order to achieve an optimal therapeutic effect. Since the administration of drugs often requires a defined or minimum effective dosage in the human body, more

  10. [Display technologies for augmented reality in medical applications].

    Science.gov (United States)

    Eck, Ulrich; Winkler, Alexander

    2018-04-01

    One of the main challenges for modern surgery is the effective use of the many available imaging modalities and diagnostic methods. Augmented reality systems can be used in the future to blend patient and planning information into the view of surgeons, which can improve the efficiency and safety of interventions. In this article we present five visualization methods to integrate augmented reality displays into medical procedures and the advantages and disadvantages are explained. Based on an extensive literature review the various existing approaches for integration of augmented reality displays into medical procedures are divided into five categories and the most important research results for each approach are presented. A large number of mixed and augmented reality solutions for medical interventions have been developed as research prototypes; however, only very few systems have been tested on patients. In order to integrate mixed and augmented reality displays into medical practice, highly specialized solutions need to be developed. Such systems must comply with the requirements with respect to accuracy, fidelity, ergonomics and seamless integration into the surgical workflow.

  11. USSTRIDE program is associated with competitive Black and Latino student applicants to medical school

    OpenAIRE

    Campbell, Kendall M.; Berne-Anderson, Thesla; Wang, Aihua; Dormeus, Guy; Rodríguez, José E.

    2014-01-01

    Purpose: We compared MCAT scores, grade point averages (GPAs), and medical school acceptance rates of Black and Latino students in an outreach program called Undergraduate Science Students Together Reaching Instructional Diversity and Excellence (USSTRIDE) to non-USSTRIDE students. We hypothesized that Black and Latino participants in USSTRIDE had higher acceptance rates to medical school, higher MCAT scores, and college GPAs when compared to other Black and Latino medical school applicants f...

  12. Radiation environmental impact assessment of the radioisotope's application on nuclear medical science

    International Nuclear Information System (INIS)

    Liu Hongshi

    2004-01-01

    The radiation environmental impact assessment of the radioisotope's application on nuclear medical science is introduced, including the assessment criteria, the assessment methods and the environmental impact assessment of three wastes emission. (authors)

  13. Proceedings of the tenth annual symposium on computer applications in medical care

    International Nuclear Information System (INIS)

    Orthner, H.F.

    1988-01-01

    This book covers the proceedings of the tenth annual symposium on Computer Applications in Medical Care. The papers include: Image processing in cardiovascular radiology and radiologic automated diagnosis (RAD)

  14. 77 FR 5213 - Medicare Program; Emergency Medical Treatment and Labor Act (EMTALA): Applicability to Hospital...

    Science.gov (United States)

    2012-02-02

    ... [CMS-1350-NC] RIN 0938-AQ51 Medicare Program; Emergency Medical Treatment and Labor Act (EMTALA... the applicability of the Emergency Medical Treatment and Labor Act (EMTALA) to hospital inpatients... available to persons without Federal government identification, commenters are encouraged to leave their...

  15. Iso-Surface Volume Rendering : speed and accuracy for medical applications

    NARCIS (Netherlands)

    Bosma, Marco

    2000-01-01

    This thesis describes the research on the accuracy and speed of different methods for the visualization of three-dimensional (3D)sets of (measured) data. In medical environments, these 3D datasets are generated by for instance CT and MRI scanners. The medical application makes special demands on the

  16. 78 FR 15974 - Importer of Controlled Substances, Notice of Application; Meridian Medical Technologies

    Science.gov (United States)

    2013-03-13

    ... DEPARTMENT OF JUSTICE Drug Enforcement Administration Importer of Controlled Substances, Notice of Application; Meridian Medical Technologies Pursuant to Title 21 Code of Federal Regulations 1301.34 (a), this is notice that on January 8, 2013, Meridian Medical Technologies, 2555 Hermelin Drive, St. Louis...

  17. 77 FR 19716 - Importer of Controlled Substances; Notice of Application Meridian Medical Technologies

    Science.gov (United States)

    2012-04-02

    ... DEPARTMENT OF JUSTICE Drug Enforcement Administration Importer of Controlled Substances; Notice of Application Meridian Medical Technologies Pursuant to 21 U.S.C. 958(i), the Attorney General shall, prior to... is notice that on January 4, 2012, Meridian Medical Technologies, 2555 Hermelin Drive, St. Louis...

  18. 78 FR 31563 - Ryan White HIV/AIDS Program Core Medical Services Waiver; Application Requirements

    Science.gov (United States)

    2013-05-24

    ... HIV/AIDS Program Core Medical Services Waiver; Application Requirements AGENCY: Health Resources and... Public Health Service Act, as amended by the Ryan White HIV/AIDS Treatment Extension Act of 2009 (Ryan... medical services, including antiretroviral drugs, for individuals with HIV/AIDS identified and eligible...

  19. Application of EGS and ETRAN to Problems in Medical Physics and Dosimetry

    CERN Document Server

    Nelson, W R

    1980-01-01

    The author looks at a few applications of Monte Carlo programs to problems of interest in medical physics and dosimetry. In particular, two areas are considered: 1) bremsstrahlung production from medical accelerators; 2) photon dosimetry at medium to low energies. (16 refs) .

  20. Technology update on fast plastic scintillators for medical applications

    International Nuclear Information System (INIS)

    Lyons, P.B.

    1977-01-01

    Plastic scintillators appear to have potential utility in three research areas related to nuclear medicine: (1) high count rate applications in general, (2) positron camera applications, and (3) positron source localization through measurement of relative arrival times of annihilation quanta at two co-linear detectors. These three areas of applicability depend on improvement in three specific areas of plastic scintillator technology: (a) development of plastics with very fast decay times, (b) development of plastics with greatly improved high energy photon detection efficiencies (high-Z loaded plastics), and (c) improvement of fast timing system capabilities. The three preceding areas of improvement are discussed

  1. Application of medical cases in general genetics teaching in universities.

    Science.gov (United States)

    He, Zhumei; Bie, Linsai; Li, Wei

    2018-01-20

    General genetics is a core course in life sciences, medicine, agriculture and other related fields. As one of the most fast-developing disciplines of life sciences in the 21th century, the influence of the genetics knowledge on daily life is expanding, especially on human health and reproduction. In order to make it easier for students to understand the profound principles of genetics and to better apply the theories to daily life, we have introduced appropriate medical cases in general genetics teaching and further extended them combined with theoretical basis of genetics. This approach will be beneficial to enhance students' abilities of genetic analysis and promote their enthusiasm to learn and master practical skills. In this paper, we enumerate medical cases related to the modern genetics teaching system to provide a reference for genetics teaching in general and normal universities.

  2. Applications of Novel Techniques to Health Foods, Medical and Agricultural Biotechnology

    OpenAIRE

    Baianu, I. C.; Lozano, P. R.; Prisecaru, V. I.; Lin, H. C.

    2004-01-01

    Selected applications of novel techniques in Agricultural Biotechnology, Health Food formulations and Medical Biotechnology are being reviewed with the aim of unraveling future developments and policy changes that are likely to open new niches for Biotechnology and prevent the shrinking or closing the existing ones. Amongst the selected novel techniques with applications to both Agricultural and Medical Biotechnology are: immobilized bacterial cells and enzymes, microencapsulation and liposom...

  3. Processing of hyperspectral medical images applications in dermatology using Matlab

    CERN Document Server

    Koprowski, Robert

    2017-01-01

    This book presents new methods of analyzing and processing hyperspectral medical images, which can be used in diagnostics, for example for dermatological images. The algorithms proposed are fully automatic and the results obtained are fully reproducible. Their operation was tested on a set of several thousands of hyperspectral images and they were implemented in Matlab. The presented source code can be used without licensing restrictions. This is a valuable resource for computer scientists, bioengineers, doctoral students, and dermatologists interested in contemporary analysis methods.

  4. Medical applications of accelerators at Tata Memorial Centre

    International Nuclear Information System (INIS)

    Dinshaw, K.A.

    2003-01-01

    The Tata Memorial Centre constitutes the national comprehensive cancer centre for the prevention, diagnosis, treatment and research on cancer. It is well equipped with sophisticated state-of-the-art equipment capable of delivering External Beam Radiotherapy (Ebert) and Brachytherapy. Nearly 400 patients receive Ebert daily at the institute from a team of highly skilled and dedicated radiation oncologists, medical physicists and technologists, making it one of the busiest centres in the country

  5. Multicore optical fiber grating array fabrication for medical sensing applications

    Science.gov (United States)

    Westbrook, Paul S.; Feder, K. S.; Kremp, T.; Taunay, T. F.; Monberg, E.; Puc, G.; Ortiz, R.

    2015-03-01

    In this work we report on a fiber grating fabrication platform suitable for parallel fabrication of Bragg grating arrays over arbitrary lengths of multicore optical fiber. Our system exploits UV transparent coatings and has precision fiber translation that allows for quasi-continuous grating fabrication. Our system is capable of both uniform and chirped fiber grating array spectra that can meet the demands of medical sensors including high speed, accuracy, robustness and small form factor.

  6. [Application of mind map in teaching of medical parasitology].

    Science.gov (United States)

    Zhou, Hong-Chang; Shao, Sheng-Wen; Xu, Bo-Ying

    2012-12-30

    To improve the teaching quality of medical parasitology, mind map, a simple and effective learning method, was introduced. The mind map of each chapter was drawn by teacher and distributed to students before the class. It was helpful for teacher to straighten out the teaching idea, and for students to grasp the important learning points, perfect the class notes and improve learning efficiency. The divergent characteristics of mind map can also help to develop the students' innovation ability.

  7. The role of electromagnetic separators in the production of radiotracers for bio-medical research and nuclear medical application

    CERN Document Server

    Beyer, Gerd-Jürgen

    2003-01-01

    With the growing complexity of positron emission tomography/single photon emission computed tomography imaging and the new developments in systemic radionuclide therapy there is a growing need for radioisotope preparations with higher radiochemical and radionuclidic purity that has not been achievable before. Especially important for the new applications is the specific activity of the radiotracer. Conventional methods in medical isotope production have reached their technical limitations. The role of isotope separators is discussed with examples of typical production and characterization experiments conducted at the ISOLDE and TRIUMF facilities. These preliminary experiments indicate that isotope separators have a definite role to play in the future for the production of radioisotopes for biomedical research and medical application.

  8. Application of medical cannabis in patients with the neurodegeneration disorders

    Directory of Open Access Journals (Sweden)

    Lidia Kotuła

    2014-04-01

    Full Text Available Medical cannabis is the dried flowers of the female Cannabis sativa L. plant. Cannabis contains a number of active elements, including dronabinol (THC and cannabidiol (CBD. Dronabinol is usually the main ingredient. The body’s own cannabinoid system has been identified. The discovery of this system, which comprises endocannabinoids and receptors, confirmed that cannabis has a positive effect on certain illnesses and conditions. Two types of cannabinoid receptors have been identified: CB1 and CB2 receptors. The first type CB1 is mostly found in the central nervous system, modulate pain. It also has an anti-emetic effect, and has influence on the memory and the motor system. The second type of receptors CB2 is peripheral, and it is primarily found in immune system cells and it is responsible for the immunomodulatory effects of cannabinoids. Medical cannabis can help in cases of the neurodegeneration disorders, for example Parkinson’s disease, Huntington’s Disease, Amyotrophic Lateral Sclerosis. Patients generally tolerate medical cannabis well.

  9. Effects of Sterilization Cycles on PEEK for Medical Device Application

    Science.gov (United States)

    Yap, Wai Teng; Foo, Soo Leong; Lee, Teck Kheng

    2018-01-01

    The effects of the sterilization process have been studied on medical grade thermoplastic polyetheretherketone (PEEK). For a reusable medical device, material reliability is an important parameter to decide its lifetime, as it will be subjected to the continuous steam sterilization process. A spring nature, clip component was selected out of a newly designed medical device (patented) to perform this reliability study. This clip component was sterilized for a predetermined number of cycles (2, 4, 6, 8, 10, 20…100) at 121 °C for 30 min. A significant decrease of ~20% in the compression force of the spring was observed after 30 cycles, and a ~6% decrease in the lateral dimension of the clip was observed after 50 cycles. No further significant change in the compression force or dimension was observed for the subsequent sterilization cycles. Vickers hardness and differential scanning calorimetry (DSC) techniques were used to characterize the effects of sterilization. DSC results exhibited no significant change in the degree of cure and melting behavior of PEEK before and after the sterilization. Hardness measurement exhibited an increase of ~49% in hardness after just 20 cycles. When an unsterilized sample was heated for repetitive cycles without the presence of moisture (121 °C, 10 and 20 cycles), only ~7% of the maximum change in hardness was observed. PMID:29466289

  10. Effects of Sterilization Cycles on PEEK for Medical Device Application.

    Science.gov (United States)

    Kumar, Amit; Yap, Wai Teng; Foo, Soo Leong; Lee, Teck Kheng

    2018-02-21

    The effects of the sterilization process have been studied on medical grade thermoplastic polyetheretherketone (PEEK). For a reusable medical device, material reliability is an important parameter to decide its lifetime, as it will be subjected to the continuous steam sterilization process. A spring nature, clip component was selected out of a newly designed medical device (patented) to perform this reliability study. This clip component was sterilized for a predetermined number of cycles (2, 4, 6, 8, 10, 20…100) at 121 °C for 30 min. A significant decrease of ~20% in the compression force of the spring was observed after 30 cycles, and a ~6% decrease in the lateral dimension of the clip was observed after 50 cycles. No further significant change in the compression force or dimension was observed for the subsequent sterilization cycles. Vickers hardness and differential scanning calorimetry (DSC) techniques were used to characterize the effects of sterilization. DSC results exhibited no significant change in the degree of cure and melting behavior of PEEK before and after the sterilization. Hardness measurement exhibited an increase of ~49% in hardness after just 20 cycles. When an unsterilized sample was heated for repetitive cycles without the presence of moisture (121 °C, 10 and 20 cycles), only ~7% of the maximum change in hardness was observed.

  11. [Design and application of medical electric leg-raising machine].

    Science.gov (United States)

    Liang, Jintang; Chen, Jinyuan; Zhao, Zixian; Lin, Jinfeng; Li, Juanhong; Zhong, Jingliang

    2017-08-01

    Passive leg raising is widely used in clinic, but it lacks of specialized mechanical raise equipment. It requires medical staff to raise leg by hand or requires a multi-functional bed to raise leg, which takes time and effort. Therefore we have developed a new medical electric leg-raising machine. The equipment has the following characteristics: simple structure, stable performance, easy operation, fast and effective, safe and comfortable. The height range of the lifter is 50-120 cm, the range of the angle of raising leg is 10degree angle-80degree angle, the maximum supporting weight is 40 kg. Because of raising the height of the lower limbs and making precise angle, this equipment can completely replace the traditional manner of lifting leg by hand with multi-functional bed to lift patients' leg and can reduce the physical exhaustion and time consumption of medical staff. It can change the settings at any time to meet the needs of the patient; can be applied to the testing of PLR and dynamically assessing the hemodynamics; can prevent deep vein thrombosis and some related complications of staying in bed; and the machine is easy to be cleaned and disinfected, which can effectively avoid hospital acquired infection and cross infection; and can also be applied to emergency rescue of various disasters and emergencies.

  12. Nano-Antenna For Terahertz (THz) Medical Imaging Applications

    Data.gov (United States)

    National Aeronautics and Space Administration — As a result of technological breakthroughs, research and applications in the Terahertz (THz) radiation system are experiencing explosive growth. The non-ionizing and...

  13. Medical Applications of Non-Medical Research: Applications Derived from BES-Supported Research and Research at BES Facilities

    Science.gov (United States)

    1998-07-01

    This publication contains stories that illustrate how the Office of Basic Energy Sciences (BES) research and major user facilities have impacted the medical sciences in the selected topical areas of disease diagnosis, treatment (including drug development, radiation therapy, and surgery), understanding, and prevention.

  14. The Most Common Smartphone Applications Used By Medical Students and Barriers of Using Them.

    Science.gov (United States)

    Jebraeily, Mohamad; Fazlollahi, Zahra Zare; Rahimi, Bahlol

    2017-12-01

    Medical knowledge is rapidly expanding and updating. It is very important that students can timely access to information and the latest scientific evidence without any time and place limitation. The smartphone is one of ICT tools that adopted greatly by healthcare professionals. Today, the most medical sciences universities have provided smartphone as an educational aid tool and acquisition licenses for medical apps resources in training of their students. This research was conducted to determine common smartphone applications among medical students of Urmia University of medical sciences and to identify barriers in using them. This research was a descriptive type of study carried out in 2016. Population of the study included 530 medical students completing the clinical course in Urmia University of Medical Sciences. Data were collected using researcher-developed questionnaire. The validity of it determined based on the view of experts and the reliability of it obtained by calculating the value of Cronbach's alpha (α = 0.82). 82.3% of the students had smartphone, which in terms of operating system the highest was related Andriod (53%) and iPhone (32%). The most common applications used often by medical students included Up to date, PubSearch, Calculate by QxMD, Epocrates and OMnio. Lack of accreditation of medical apps by valid health institutions (4.63), lack of support and update of applications by their developers (4.44), lack of adequate skill to use applications (4.25) are the most important barriers in using these applications among students. To assurance quality of medical apps, it seems very important that academic and healthcare organizations should be involved to develop and update the apps and also provided guidelines for accreditation of apps. It is recommended that for promotion of knowledge and skill of students provide essential educations.

  15. Medical Device Integrated Vital Signs Monitoring Application with Real-Time Clinical Decision Support.

    Science.gov (United States)

    Moqeem, Aasia; Baig, Mirza; Gholamhosseini, Hamid; Mirza, Farhaan; Lindén, Maria

    2018-01-01

    This research involves the design and development of a novel Android smartphone application for real-time vital signs monitoring and decision support. The proposed application integrates market available, wireless and Bluetooth connected medical devices for collecting vital signs. The medical device data collected by the app includes heart rate, oxygen saturation and electrocardiograph (ECG). The collated data is streamed/displayed on the smartphone in real-time. This application was designed by adopting six screens approach (6S) mobile development framework and focused on user-centered approach and considered clinicians-as-a-user. The clinical engagement, consultations, feedback and usability of the application in the everyday practices were considered critical from the initial phase of the design and development. Furthermore, the proposed application is capable to deliver rich clinical decision support in real-time using the integrated medical device data.

  16. Photon and electron interaction databases and their use in medical applications

    International Nuclear Information System (INIS)

    Cullen, D.E.

    1994-05-01

    This paper discusses the All Particle-Method photon and electron interaction, and atomic relaxation data bases, that were initially developed for use in medical applications. Currently these data bases are being used in both medical and industrial applications. The All Particle Method data bases are designed to allow modelling of individual collisions in as much detail as possible. Elastic scattering can be modelled as single, as opposed to multiple, scattering events. Ionization can be modelled at the atomic subshell level, to define which subshell was ionized, spectrum of the initially emitted electron, as well as the spectra of electron and photons emitted as the atom relaxes back to neutrality. These data bases are currently being used in applications involving rather small spatial regions, where detailed calculations of individual events are required. While initially designed for use in medical applications, these data bases are now being used in a variety of industrial applications, e.g., transport in microelectronics

  17. MediFrame: A Tablet Application to Plan, Inform, Remind and Sustain Older Adults Medication Intake

    DEFF Research Database (Denmark)

    Dalgaard, Lea Gulstav; Grönvall, Erik; Verdezoto, Nervo

    2013-01-01

    treatment or a specific condition. In this paper, we discuss experiences from designing the tablet-based application MediFrame. MediFrame is a personal medication management system to support older adults in non-clinical settings such as the home. The paper describes the user-centered design process...... and the resulting tablet application. We show how MediFrame can be used to support adherence in medical treatments through fieldwork informed use scenarios. Based on early qualitative feedback, we also discuss lessons learned and how designers can support a holistic medication experience for an older adult...

  18. Discussions in symposium 'neutron dosimetry in neutron fields - from detection techniques to medical applications'

    International Nuclear Information System (INIS)

    Tanimura, Y.; Sato, T.; Kumada, H.; Terunuma, T.; Sakae, T.; Harano, H.; Matsumoto, T.; Suzuki, T.; Matsufuji, N.

    2008-01-01

    Recently the traceability system (JCSS) of neutron standard based on the Japanese law 'Measurement Act' has been instituted. In addition, importance of the neutron dose evaluation has been increasing in not only the neutron capture medical treatment but also the proton or heavy particle therapy. Against such a background, a symposium 'Neutron dosimetry in neutron fields - From detection techniques to medical applications-' was held on March 29, 2008 and recent topics on the measuring instruments and their calibration, the traceability system, the simulation technique and the medical applications were introduced. This article summarizes the key points in the discussion at the symposium. (author)

  19. Synchrotron radiation applications in medical research at Brookhaven National Laboratory

    International Nuclear Information System (INIS)

    Thomlinson, W.

    1997-08-01

    In the relatively short time that synchrotrons have been available to the scientific community, their characteristic beams of UV and X-ray radiation have been applied to virtually all areas of medical science which use ionizing radiation. The ability to tune intense monochromatic beams over wide energy ranges clearly differentiates these sources from standard clinical and research tools. The tunable spectrum, high intrinsic collimation of the beams, polarization and intensity of the beams make possible in-vitro and in-vivo research and therapeutic programs not otherwise possible. From the beginning of research operation at the National Synchrotron Light Source (NSLS), many programs have been carrying out basic biomedical research. At first, the research was limited to in-vitro programs such as the x-ray microscope, circular dichroism, XAFS, protein crystallography, micro-tomography and fluorescence analysis. Later, as the coronary angiography program made plans to move its experimental phase from SSRL to the NSLS, it became clear that other in-vivo projects could also be carried out at the synchrotron. The development of SMERF (Synchrotron Medical Research Facility) on beamline X17 became the home not only for angiography but also for the MECT (Multiple Energy Computed Tomography) project for cerebral and vascular imaging. The high energy spectrum on X17 is necessary for the MRT (Microplanar Radiation Therapy) experiments. Experience with these programs and the existence of the Medical Programs Group at the NSLS led to the development of a program in synchrotron based mammography. A recent adaptation of the angiography hardware has made it possible to image human lungs (bronchography). Fig. 1 schematically depicts the broad range of active programs at the NSLS

  20. Industrial, agricultural, and medical applications of radiation metrology

    International Nuclear Information System (INIS)

    Hubbell, J.H.

    1987-01-01

    Photon and particle radiations (gamma rays, X-rays, bremsstrahlung, electrons and other charged particles, neutrons) from radioactive isotopes, X-ray tubes, and accelerators are now widely used in gauging, production control, and other monitoring and metrology devices where avoidance of mechanical contact is desirable. The general principles of radiation gauges, which rely on detection of radiation transmitted by the sample, or on detection of scattered or other secondary radiations produced in the sample, are discussed. Examples of such devices currently used in industrial, agricultural, and medical situations are presented, and some anticipated developments are mentioned. (author)

  1. Protection of workers during medical application of transcranial magnetic stimulation

    International Nuclear Information System (INIS)

    Mischke, Marian

    2017-01-01

    Transcranial magnetic stimulation (TMS) is used in various applications in medicine. TMS is accompanied by relevant exposures by (extremely) low frequency magnetic fields. The applications can pose a threat to workers' health and safety at work through direct and indirect effects. Since the end of last year, the EMFV has been published to specify the obligations of the employer in association to ''Arbeitsschutzgesetz'' with regards to electromagnetic fields. Based on conventional types of equipment for the TMS, a possible procedure is presented for the employer to fulfill his duties.

  2. Chemical treatment of radioactive liquid wastes from medical applications

    International Nuclear Information System (INIS)

    Castillo A, J.

    1995-01-01

    This work is a study about the treatment of the most important radioactive liquid wastes from medical usages, generated in medical institutions with nuclear medicine services. The radionuclides take in account are 32 P, 35 S, 125 I. The treatments developed and improved were specific chemical precipitations for each one of the radionuclides. This work involve to precipitate the radionuclide from the liquid waste, making a chemical compound insoluble in the aqueous phase, for this process the radionuclide stay in the precipitate, lifting the aqueous phase with a very low activity than the begin. The 32 P precipitated in form of Ca 3 32 P O 4 and Ca 2 H 32 P O 4 with a value for Decontamination Factor (DF) at the end of the treatment of 32. The 35 S was precipitated in form of Ba 35 SO 4 with a DF of 26. The 125 I was precipitated in Cu 125 I to obtain a DF of 24. The results of the treatments are between the limits given for the International Atomic Energy Agency and the 10 Code of Federal Regulation 20, for the safety release at the environment. (Author)

  3. The influence of labor market changes on first-time medical school applicant pools.

    Science.gov (United States)

    Cort, David A; Morrison, Emory

    2014-12-01

    To explore whether the number and composition of first-time applicants to U.S. MD-granting medical schools, which have fluctuated over the past 30 years, are related to changes in labor market strength, specifically the unemployment rate and wages. The authors merged time series data from 1980 through 2010 (inclusive) from five sources and used multivariate time series models to determine whether changes in labor market strength (and several other macro-level factors) were related to the number of the medical school applicants as reported by the American Medical College Application Service. Analyses were replicated across specific sex and race/ethnicity applicant pools. Two results surfaced in the analyses. First, the strength of the labor market was not influential in explaining changes in applicant pool sizes for all applicants, but was strongly influential in explaining changes for black and Hispanic males. Increases of $1,000 in prevailing median wages produced a 1.6% decrease in the white male applicant pool, while 1% increases in the unemployment rate were associated with 4.5% and 3.1% increases in, respectively, the black and Hispanic male applicant pools. Second, labor market strength was a more important determinant in applications from males than in applications from females. Although stakeholders cannot directly influence the overall economic market, they can plan and prepare for fewer applications from males, especially those who are black and Hispanic, when the labor market is strong.

  4. Multilevel Modeling and Policy Development: Guidelines and Applications to Medical Travel

    Science.gov (United States)

    Garcia-Garzon, Eduardo; Zhukovsky, Peter; Haller, Elisa; Plakolm, Sara; Fink, David; Petrova, Dafina; Mahalingam, Vaishali; Menezes, Igor G.; Ruggeri, Kai

    2016-01-01

    Medical travel has expanded rapidly in recent years, resulting in new markets and increased access to medical care. Whereas several studies investigated the motives of individuals seeking healthcare abroad, the conventional analytical approach is limited by substantial caveats. Classical techniques as found in the literature cannot provide sufficient insight due to the nested nature of data generated. The application of adequate analytical techniques, specifically multilevel modeling, is scarce to non-existent in the context of medical travel. This study introduces the guidelines for application of multilevel techniques in public health research by presenting an application of multilevel modeling in analyzing the decision-making patterns of potential medical travelers. Benefits and potential limitations are discussed. PMID:27252672

  5. The national institute of radiation hygiene and the medical application of radiation

    International Nuclear Information System (INIS)

    Baarli, J.

    1988-01-01

    This paper gives a review of the rules and regulations concerning medical application of radiation in Norway. It discusses the intention of the regulations, the way in which the regulations is applied and how the National Institute of Radiation Hygiene as the competent authority assures the application of the regulations. The paper furthermore gives an indication of the areas of radiation application in medicine and the number of location of X-ray equipment, nuclear medical laboratories, radiation therapy equipment, etc. The number of X-ray examinations in Norway per year are also given, together with their distribution among the various types of examinations. Summary results of a quality assurance investigation of nuclear medical laboratories are given, as well as the results of inspections of the various types of equipment used in medical diagnostics

  6. Multilevel Modeling and Policy Development: Guidelines and Applications to Medical Travel.

    Science.gov (United States)

    Garcia-Garzon, Eduardo; Zhukovsky, Peter; Haller, Elisa; Plakolm, Sara; Fink, David; Petrova, Dafina; Mahalingam, Vaishali; Menezes, Igor G; Ruggeri, Kai

    2016-01-01

    Medical travel has expanded rapidly in recent years, resulting in new markets and increased access to medical care. Whereas several studies investigated the motives of individuals seeking healthcare abroad, the conventional analytical approach is limited by substantial caveats. Classical techniques as found in the literature cannot provide sufficient insight due to the nested nature of data generated. The application of adequate analytical techniques, specifically multilevel modeling, is scarce to non-existent in the context of medical travel. This study introduces the guidelines for application of multilevel techniques in public health research by presenting an application of multilevel modeling in analyzing the decision-making patterns of potential medical travelers. Benefits and potential limitations are discussed.

  7. Three-Dimensional Printing and Medical Imaging: A Review of the Methods and Applications.

    Science.gov (United States)

    Marro, Alessandro; Bandukwala, Taha; Mak, Walter

    2016-01-01

    The purpose of this article is to review recent innovations on the process and application of 3-dimensional (3D) printed objects from medical imaging data. Data for 3D printed medical models can be obtained from computed tomography, magnetic resonance imaging, and ultrasound using the Data Imaging and Communications in Medicine (DICOM) software. The data images are processed using segmentation and mesh generation tools and converted to a standard tessellation language (STL) file for printing. 3D printing technologies include stereolithography, selective laser sintering, inkjet, and fused-deposition modeling . 3D printed models have been used for preoperative planning of complex surgeries, the creation of custom prosthesis, and in the education and training of physicians. The application of medical imaging and 3D printers has been successful in providing solutions to many complex medical problems. As technology advances, its applications continue to grow in the future. Copyright © 2015 Mosby, Inc. All rights reserved.

  8. Genome editing: progress and challenges for medical applications

    Directory of Open Access Journals (Sweden)

    Dana Carroll

    2016-11-01

    Full Text Available Editorial summary The development of the CRISPR-Cas platform for genome editing has greatly simplified the process of making targeted genetic modifications. Applications of genome editing are expected to have a substantial impact on human therapies through the development of better animal models, new target discovery, and direct therapeutic intervention.

  9. Nanoparticles in medical applications – a direction of the future?

    Directory of Open Access Journals (Sweden)

    Anna Jung

    2014-06-01

    Full Text Available Methods of producing nanoparticles, called nanotechnologies, have inspired lively interest over the recent years due to the broad possibilities for application of nanoparticles in numerous fields, including electronics, information technology, biotechnology, medicine, pharmacy, cosmetology and others. Nanoparticles are defined as particles which may occur in various shapes and which have at least one dimension smaller than 100 nm. Depending on the process of creation we can differentiate between natural nanoparticles occurring in the environment and designed nanoparticles, which are man-made. Designed nanoparticles are characterised by special physical properties which make them suitable for biomedical applications, among others. An example of such an application is the use of silver nanocomposites, which in a micronised form display a strong bacteriostatic and bactericidal effect. Graphene, the latest achievement of nanotechnology with unique mechanical and physical properties, is another material which raises much interest among researchers. The dynamic development of numerous directions in modern technologies based on nanotechnologies is an indisputable sign of progress. The discovery of the unique properties of nanomaterials opens wide possibilities for numerous applications; however, it also requires comprehensive research to ensure they are safe to use.

  10. Computational Fluid Dynamics Methods and Their Applications in Medical Science

    Directory of Open Access Journals (Sweden)

    Kowalewski Wojciech

    2016-12-01

    Full Text Available As defined by the National Institutes of Health: “Biomedical engineering integrates physical, chemical, mathematical, and computational sciences and engineering principles to study biology, medicine, behavior, and health”. Many issues in this area are closely related to fluid dynamics. This paper provides an overview of the basic concepts concerning Computational Fluid Dynamics and its applications in medicine.

  11. Medical students' recognition and application of geriatrics principles in a new curriculum.

    Science.gov (United States)

    Nanda, Aman; Farrell, Timothy W; Shield, Renée R; Tomas, Maria; Campbell, Susan E; Wetle, Terrie

    2013-03-01

    Given the aging U.S. population, it is imperative that medical students recognize and apply geriatrics principles. To address this need, in 2006, the Warren Alpert Medical School of Brown University integrated geriatrics content into a new medical school curriculum. Preclinical and clinical medical students submitted written reflective journals in response to prompts regarding the geriatrics content of the new medical school curriculum, including their didactic and clinical experiences. An interdisciplinary team used a structured qualitative approach to identify themes, including the recognition and application of geriatrics principles. Thirty medical student journalers submitted 405 journal entries. Themes regarding students' emerging understanding of geriatrics principles included a growing understanding of geriatrics principles, recognition of the importance of psychosocial factors and patient preferences in caring for older adults, recognition of the complexities of treating older adults and application of geriatric principles to clinical situations, and understanding of physicians' roles in managing the care of older adults. Medical student reflective journaling allows medical educators to obtain timely feedback on curricular innovations and helps illuminate the process by which medical students learn to recognize and apply core geriatrics principles. © 2013, Copyright the Authors Journal compilation © 2013, The American Geriatrics Society.

  12. The evolution of cognitive load theory and its application to medical education

    NARCIS (Netherlands)

    Leppink, Jimmie; van den Heuvel, Angelique

    Cognitive Load Theory (CLT) has started to find more applications in medical education research. Unfortunately, misconceptions such as lower cognitive load always being beneficial to learning and the continued use of dated concepts and methods can result in improper applications of CLT principles in

  13. Update on Research and Application of Problem-Based Learning in Medical Science Education

    Science.gov (United States)

    Fan, Chuifeng; Jiang, Biying; Shi, Xiuying; Wang, Enhua; Li, Qingchang

    2018-01-01

    Problem-based learning (PBL) is a unique form of pedagogy dedicated to developing students' self-learning and clinical practice skills. After several decades of development, although applications vary, PBL has been recognized all over the world and implemented by many medical schools. This review summarizes and updates the application and study of…

  14. Ethical aspects of using medical social media in healthcare applications.

    Science.gov (United States)

    Denecke, Kerstin

    2014-01-01

    The advances in internet and mobile technologies and their increased use in healthcare led to the development of a new research field: health web science. Many research questions are addressed in that field, starting from analysing social-media data, to recruiting participants for clinical studies and monitoring the public health status. The information provided through this channel is unique in a sense that there is no other written source of experiences from patients and health carers. The increased usage and analysis of health web data poses questions on privacy, and ethics. Through a literature review, the current awareness on ethical issues in the context of public health monitoring and research using medical social media data is determined. Further, considerations on the topic were collected from members of the IMIA Social Media Working group.

  15. Accelerators for Medical Applications What is so Special?

    CERN Document Server

    Schippers, J.M.

    2016-01-01

    Specific requirements of accelerators for radiation therapy with protons or ions will be discussed. The focus will be on accelerator design, operational and formal aspects. We will discuss the special requirements to reach a high reliability for patient treatments as well as an accurate delivery of the dose at the correct position in the patient using modern techniques like pencil beam scanning. It will be shown that the requirements of the accelerated beam differ from those in a nuclear physics laboratory. The way of operating such a medical device requires not only operators, but also the possibility to have a safe machine operation by non accelerator specialists at different operating sites (treatment rooms). It will be shown that the organisation and role of the control/interlock system can be considered as being the most dedicated in a particle-therapy providing facility.

  16. Far infrared radiation (FIR): its biological effects and medical applications.

    Science.gov (United States)

    Vatansever, Fatma; Hamblin, Michael R

    2012-11-01

    Far infrared (FIR) radiation (λ = 3-100 μm) is a subdivision of the electromagnetic spectrum that has been investigated for biological effects. The goal of this review is to cover the use of a further sub-division (3- 12 μm) of this waveband, that has been observed in both in vitro and in vivo studies, to stimulate cells and tissue, and is considered a promising treatment modality for certain medical conditions. Technological advances have provided new techniques for delivering FIR radiation to the human body. Specialty lamps and saunas, delivering pure FIR radiation (eliminating completely the near and mid infrared bands), have became safe, effective, and widely used sources to generate therapeutic effects. Fibers impregnated with FIR emitting ceramic nanoparticles and woven into fabrics, are being used as garments and wraps to generate FIR radiation, and attain health benefits from its effects.

  17. ContextProvider: Context awareness for medical monitoring applications.

    Science.gov (United States)

    Mitchell, Michael; Meyers, Christopher; Wang, An-I Andy; Tyson, Gary

    2011-01-01

    Smartphones are sensor-rich and Internet-enabled. With their on-board sensors, web services, social media, and external biosensors, smartphones can provide contextual information about the device, user, and environment, thereby enabling the creation of rich, biologically driven applications. We introduce ContextProvider, a framework that offers a unified, query-able interface to contextual data on the device. Unlike other context-based frameworks, ContextProvider offers interactive user feedback, self-adaptive sensor polling, and minimal reliance on third-party infrastructure. ContextProvider also allows for rapid development of new context and bio-aware applications. Evaluation of ContextProvider shows the incorporation of an additional monitoring sensor into the framework with fewer than 100 lines of Java code. With adaptive sensor monitoring, power consumption per sensor can be reduced down to 1% overhead. Finally, through the use of context, accuracy of data interpretation can be improved by up to 80%.

  18. Carbon nanotubes: properties, synthesis, purification, and medical applications

    Science.gov (United States)

    2014-01-01

    Current discoveries of different forms of carbon nanostructures have motivated research on their applications in various fields. They hold promise for applications in medicine, gene, and drug delivery areas. Many different production methods for carbon nanotubes (CNTs) have been introduced; functionalization, filling, doping, and chemical modification have been achieved, and characterization, separation, and manipulation of individual CNTs are now possible. Parameters such as structure, surface area, surface charge, size distribution, surface chemistry, and agglomeration state as well as purity of the samples have considerable impact on the reactivity of carbon nanotubes. Otherwise, the strength and flexibility of carbon nanotubes make them of potential use in controlling other nanoscale structures, which suggests they will have a significant role in nanotechnology engineering. PMID:25170330

  19. Carbon nanotubes: properties, synthesis, purification, and medical applications

    Science.gov (United States)

    Eatemadi, Ali; Daraee, Hadis; Karimkhanloo, Hamzeh; Kouhi, Mohammad; Zarghami, Nosratollah; Akbarzadeh, Abolfazl; Abasi, Mozhgan; Hanifehpour, Younes; Joo, Sang Woo

    2014-08-01

    Current discoveries of different forms of carbon nanostructures have motivated research on their applications in various fields. They hold promise for applications in medicine, gene, and drug delivery areas. Many different production methods for carbon nanotubes (CNTs) have been introduced; functionalization, filling, doping, and chemical modification have been achieved, and characterization, separation, and manipulation of individual CNTs are now possible. Parameters such as structure, surface area, surface charge, size distribution, surface chemistry, and agglomeration state as well as purity of the samples have considerable impact on the reactivity of carbon nanotubes. Otherwise, the strength and flexibility of carbon nanotubes make them of potential use in controlling other nanoscale structures, which suggests they will have a significant role in nanotechnology engineering.

  20. Surface-enhanced Raman spectroscopy bioanalytical, biomolecular and medical applications

    CERN Document Server

    Procházka, Marek

    2016-01-01

    This book gives an overview of recent developments in RS and SERS for sensing and biosensing considering also limitations, possibilities and prospects of this technique. Raman scattering (RS) is a widely used vibrational technique providing highly specific molecular spectral patterns. A severe limitation for the application of this spectroscopic technique lies in the low cross section of RS. Surface-enhanced Raman scattering (SERS) spectroscopy overcomes this problem by 6-11 orders of magnitude enhancement compared with the standard RS for molecules in the close vicinity of certain rough metal surfaces. Thus, SERS combines molecular fingerprint specificity with potential single-molecule sensitivity. Due to the recent development of new SERS-active substrates, labeling and derivatization chemistry as well as new instrumentations, SERS became a very promising tool for many varied applications, including bioanalytical studies and sensing. Both intrinsic and extrinsic SERS biosensing schemes have been employed to...

  1. Review of Positive Psychology Applications in Clinical Medical Populations

    OpenAIRE

    Ann Macaskill

    2016-01-01

    This review examines the application of positive psychology concepts in physical health care contexts. Positive psychology aims to promote well-being in the general population. Studies identifying character strengths associated with well-being in healthy populations are numerous. Such strengths have been classified and Positive Psychology Interventions (PPIs) created to develop these strengths further in individuals. Positive psychology research is increasingly being undertaken in health care...

  2. Carbon nano tubes -Buckypaper- radiation studies for medical physics application

    Energy Technology Data Exchange (ETDEWEB)

    Alanazi, A.; Alkhorayef, M.; Dalton, A.; Bradley, D. A. [University of Surrey, Department of Physics, College for Nuclear and Radiation Physics, Guildford, Surrey GR2 7XH (United Kingdom); Alzimami, K. [King Saud University, Department of Radiological Sciences, P. O. Box 10219, Riyadh 11433 (Saudi Arabia); Abuhadi, N., E-mail: a.alanazi@surrey.ac.uk [Jazan University, Faculty of Medical Applied Sciences, Diagnostic Radiology Department, P. O. Box 114, Jazan (Saudi Arabia)

    2015-10-15

    Radiation dosimetry underpins safe and effective clinical applications of radiation. Many materials have been used to measure the radiation dose deposited in human tissue, their radiation response requiring the application of correction factors to account for various influencing factors, including sensitivity to dose and energy dependence. In regard to the latter, account needs to be taken of difference from the effective atomic number of human tissue, soft or calcified. Graphite ion chambers and semiconductor diode detectors have been used to make measurements in phantoms but these active devices represent a clear disadvantage when considered for in vivo dosimetry. In both circumstances, dosimeters with atomic number similar to human tissue are needed. Carbon nano tubes have properties that potentially meet the demand, requiring low voltage in active devices and an atomic number similar to adipose tissue. In this study, single-wall carbon nano tubes buckypaper has been used to measure the beta particle dose deposited from a strontium-90 source, the medium displaying thermoluminescence at potentially useful sensitivity. As an example, the samples show a clear response for a dose of 2 Gy. This finding suggests that carbon nano tubes can be used as a passive dosimeter specifically for the high levels of radiation exposures used in radiation therapy. Furthermore, the finding points towards further potential applications such as for space radiation measurements, not least because the medium satisfies a demand for light but strong materials of minimal capacitance. (Author)

  3. Carbon nano tubes -Buckypaper- radiation studies for medical physics application

    International Nuclear Information System (INIS)

    Alanazi, A.; Alkhorayef, M.; Dalton, A.; Bradley, D. A.; Alzimami, K.; Abuhadi, N.

    2015-10-01

    Radiation dosimetry underpins safe and effective clinical applications of radiation. Many materials have been used to measure the radiation dose deposited in human tissue, their radiation response requiring the application of correction factors to account for various influencing factors, including sensitivity to dose and energy dependence. In regard to the latter, account needs to be taken of difference from the effective atomic number of human tissue, soft or calcified. Graphite ion chambers and semiconductor diode detectors have been used to make measurements in phantoms but these active devices represent a clear disadvantage when considered for in vivo dosimetry. In both circumstances, dosimeters with atomic number similar to human tissue are needed. Carbon nano tubes have properties that potentially meet the demand, requiring low voltage in active devices and an atomic number similar to adipose tissue. In this study, single-wall carbon nano tubes buckypaper has been used to measure the beta particle dose deposited from a strontium-90 source, the medium displaying thermoluminescence at potentially useful sensitivity. As an example, the samples show a clear response for a dose of 2 Gy. This finding suggests that carbon nano tubes can be used as a passive dosimeter specifically for the high levels of radiation exposures used in radiation therapy. Furthermore, the finding points towards further potential applications such as for space radiation measurements, not least because the medium satisfies a demand for light but strong materials of minimal capacitance. (Author)

  4. User experience integrated life-style cloud-based medical application.

    Science.gov (United States)

    Serban, Alexandru; Lupşe, Oana Sorina; Stoicu-Tivadar, Lăcrămioara

    2015-01-01

    Having a modern application capable to automatically collect and process data from users, based on information and lifestyle answers is one of current challenges for researchers and medical science. The purpose of the current study is to integrate user experience design (UXD) in a cloud-based medical application to improve patient safety, quality of care and organizational efficiency. The process consists of collecting traditional and new data from patients and users using online questionnaires. A questionnaire dynamically asks questions about the user's current diet and lifestyle. After the user will introduce the data, the application will formulate a presumptive nutritional plan and will suggest different medical recommendations regarding a healthy lifestyle, and calculates a risk factor for diseases. This software application, by design and usability will be an efficient tool dedicated for fitness, nutrition and health professionals.

  5. Medical image registration algorithms assesment Bronze Standard application enactment on grids using the MOTEUR workflow engine

    CERN Document Server

    Glatard, T; Pennec, X

    2006-01-01

    Medical image registration is pre-processing needed for many medical image analysis procedures. A very large number of registration algorithms are available today, but their performance is often not known and very difficult to assess due to the lack of gold standard. The Bronze Standard algorithm is a very data and compute intensive statistical approach for quantifying registration algorithms accuracy. In this paper, we describe the Bronze Standard application and we discuss the need for grids to tackle such computations on medical image databases. We demonstrate MOTEUR, a service-based workflow engine optimized for dealing with data intensive applications. MOTEUR eases the enactment of the Bronze Standard and similar applications on the EGEE production grid infrastructure. It is a generic workflow engine, based on current standards and freely available, that can be used to instrument legacy application code at low cost.

  6. Silver nanoparticles: mechanism of antimicrobial action, synthesis, medical applications, and toxicity effects

    Science.gov (United States)

    Prabhu, Sukumaran; Poulose, Eldho K.

    2012-10-01

    Silver nanoparticles are nanoparticles of silver which are in the range of 1 and 100 nm in size. Silver nanoparticles have unique properties which help in molecular diagnostics, in therapies, as well as in devices that are used in several medical procedures. The major methods used for silver nanoparticle synthesis are the physical and chemical methods. The problem with the chemical and physical methods is that the synthesis is expensive and can also have toxic substances absorbed onto them. To overcome this, the biological method provides a feasible alternative. The major biological systems involved in this are bacteria, fungi, and plant extracts. The major applications of silver nanoparticles in the medical field include diagnostic applications and therapeutic applications. In most of the therapeutic applications, it is the antimicrobial property that is being majorly explored, though the anti-inflammatory property has its fair share of applications. Though silver nanoparticles are rampantly used in many medical procedures and devices as well as in various biological fields, they have their drawbacks due to nanotoxicity. This review provides a comprehensive view on the mechanism of action, production, applications in the medical field, and the health and environmental concerns that are allegedly caused due to these nanoparticles. The focus is on effective and efficient synthesis of silver nanoparticles while exploring their various prospective applications besides trying to understand the current scenario in the debates on the toxicity concerns these nanoparticles pose.

  7. Deployment of a Grid-based Medical Imaging Application

    CERN Document Server

    Amendolia, S R; Frate, C; Gálvez, J; Hassan, W; Hauer, T; Manset, D; McClatchey, R; Odeh, M; Rogulin, D; Solomonides, T; Warren, R

    2005-01-01

    The MammoGrid project has deployed its Service-Oriented Architecture (SOA)-based Grid application in a real environment comprising actual participating hospitals. The resultant setup is currently being exploited to conduct rigorous in-house tests in the first phase before handing over the setup to the actual clinicians to get their feedback. This paper elaborates the deployment details and the experiences acquired during this phase of the project. Finally the strategy regarding migration to an upcoming middleware from EGEE project will be described. This paper concludes by highlighting some of the potential areas of future work.

  8. Management of the quality in medical applications with sealed sources

    International Nuclear Information System (INIS)

    Serrano F, A.K.; Araiza M, E.

    2003-01-01

    In this work a model of Quality management based on the ISO 9001:2000 that it includes the application of some established approaches by the IAEA 50-C/SG-Q standard is proposed, so that the different focuses from both standards are joined and achieved: the client satisfaction and certification of the quality system, and structure behavior, components and systems at secure form with a minimum of accidents. This model incorporates a program of radiological protection that emphasizes the installation of a safety culture, (Author)

  9. Development of medical application methods using radiation. Radionuclide therapy

    International Nuclear Information System (INIS)

    Choi, Chang Woon; Lim, S. M.; Kim, E.H.; Woo, K. S.; Chung, W. S.; Lim, S. J.; Choi, T. H.; Hong, S. W.; Chung, H. Y.; No, W. C.; Oh, B. H.; Hong, H. J.

    1999-04-01

    In this project, we studied following subjects: 1. development of monoclonal antibodies and radiopharmaceuticals 2. clinical applications of radionuclide therapy 3. radioimmunoguided surgery 4. prevention of restenosis with intracoronary radiation. The results can be applied for the following objectives: 1) radionuclide therapy will be applied in clinical practice to treat the cancer patients or other diseases in multi-center trial. 2) The newly developed monoclonal antibodies and biomolecules can be used in biology, chemistry or other basic life science research. 3) The new methods for the analysis of therapeutic effects, such as dosimetry, and quantitative analysis methods of radioactivity, can be applied in basic research, such as radiation oncology and radiation biology

  10. Development of medical application methods using radiation. Radionuclide therapy

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Chang Woon; Lim, S. M.; Kim, E.H.; Woo, K. S.; Chung, W. S.; Lim, S. J.; Choi, T. H.; Hong, S. W.; Chung, H. Y.; No, W. C. [Korea Atomic Energy Research Institute. Korea Cancer Center Hospital, Seoul, (Korea, Republic of); Oh, B. H. [Seoul National University. Hospital, Seoul (Korea, Republic of); Hong, H. J. [Antibody Engineering Research Unit, Taejon (Korea, Republic of)

    1999-04-01

    In this project, we studied following subjects: 1. development of monoclonal antibodies and radiopharmaceuticals 2. clinical applications of radionuclide therapy 3. radioimmunoguided surgery 4. prevention of restenosis with intracoronary radiation. The results can be applied for the following objectives: (1) radionuclide therapy will be applied in clinical practice to treat the cancer patients or other diseases in multi-center trial. (2) The newly developed monoclonal antibodies and biomolecules can be used in biology, chemistry or other basic life science research. (3) The new methods for the analysis of therapeutic effects, such as dosimetry, and quantitative analysis methods of radioactivity, can be applied in basic research, such as radiation oncology and radiation biology.

  11. Control measures in industrial and medical applications of radiation

    International Nuclear Information System (INIS)

    Akinloye, M. K.

    1999-01-01

    Radiation and radioactive substances are natural and permanent features of the environment; additionally the use of human made radiation is widespread. Sources of radiation are essential to modern health care, disposable medical supplies sterilized by intense radiation have been central to combating disease, radiology is a vital diagnostic tool and radiotherapy is commonly part of the treatment of malignancies. Nuclear techniques are in growing use in industry, agriculture, medicine and many fields of research, benefiting hundreds of millions of people and giving employment to millions of people in the related occupations, Irradiation is used around the world to preserve and reduce wastage and sterilization techniques have been used to eradicate disease carrying insects and pests. Industrial radiography is in routine use, for example to examine welds and detect cracks and help prevent the failure of engineered structures. It is also known that exposure to ionizing radiation can result to injuries that manifest themselves in the individual and his descendants. It is therefore imperative that the use of radiation sources be accompanied with the methods necessary for the prevention of the harmful effects of the radiation. These methods are referred to as control measures. Control measures that have been applied in establishments can be classified into physical control measures and administrative control measures. Physical control measures involve the technical aspects while administrative control measures augment physical measures. The guidelines and recommendations for the safe use of radiation and radioactive materials are provided through legislative and regulatory controls

  12. CVD diamonds as thermoluminescent detectors for medical applications

    International Nuclear Information System (INIS)

    Marczewska, B.; Olko, P.; Nesladek, M.; Waligorski, M.P.R.; Kerremans, Y.

    2002-01-01

    Diamond is believed to be a promising material for medical dosimetry due to its tissue equivalence, mechanical and radiation hardness, and lack of solubility in water or in disinfecting agents. A number of diamond samples, obtained under different growth conditions at Limburg University, using the chemical vapour deposition (CVD) technique, was tested as thermoluminescence dosemeters. Their TL glow curve, TL response after doses of gamma rays, fading, and so on were studied at dose levels and for radiation modalities typical for radiotherapy. The investigated CVD diamonds displayed sensitivity comparable with that of MTS-N (Li:Mg,Ti) detectors, signal stability (reproducibility after several readouts) below 10% (1 SD) and no fading was found four days after irradiation. A dedicated CVD diamond plate was grown, cut into 20 detector chips (3x3x0.5 mm) and used for measuring the dose-depth distribution at different depths in a water phantom, for 60 Co and six MV X ray radiotherapy beams. Due to the sensitivity of diamond to ambient light, it was difficult to achieve reproducibility comparable with that of standard LiF detectors. (author)

  13. Multiply charged carbon-ion production for medical application

    International Nuclear Information System (INIS)

    Kitagawa, A.; Muramatsu, M.; Sasaki, N.; Takasugi, W.; Wakaisami, S.; Biri, S.; Drentje, A. G.

    2008-01-01

    Over 3000 cancer patients have already been treated by the heavy-ion medical accelerator in Chiba at the National Institute of Radiological Sciences since 1994. The clinical results have clearly verified the effectiveness and safety of heavy-ion radiotherapy. The most important result has been to establish that the carbon ion is one of the most effective radiations for radiotherapy. The ion source is required to realize a stable beam with the same conditions for daily operation. However, the deposition of carbon ions on the wall of the plasma chamber is normally unavoidable. This causes an ''anti-wall-coating effect,'' i.e., a decreasing of the beam, especially for the higher charge-state ions due to the surface material of the wall. The ion source must be required to produce a sufficiently intense beam under the bad condition. Other problems were solved by improvements and maintenance, and thus we obtained enough reproducibility and stability along with decreased failures. We summarize our over 13 years of experience, and show the scope for further developments

  14. A quality-refinement process for medical imaging applications.

    Science.gov (United States)

    Neuhaus, J; Maleike, D; Nolden, M; Kenngott, H-G; Meinzer, H-P; Wolf, I

    2009-01-01

    To introduce and evaluate a process for refinement of software quality that is suitable to research groups. In order to avoid constraining researchers too much, the quality improvement process has to be designed carefully. The scope of this paper is to present and evaluate a process to advance quality aspects of existing research prototypes in order to make them ready for initial clinical studies. The proposed process is tailored for research environments and therefore more lightweight than traditional quality management processes. Focus on quality criteria that are important at the given stage of the software life cycle. Usage of tools that automate aspects of the process is emphasized. To evaluate the additional effort that comes along with the process, it was exemplarily applied for eight prototypical software modules for medical image processing. The introduced process has been applied to improve the quality of all prototypes so that they could be successfully used in clinical studies. The quality refinement yielded an average of 13 person days of additional effort per project. Overall, 107 bugs were found and resolved by applying the process. Careful selection of quality criteria and the usage of automated process tools lead to a lightweight quality refinement process suitable for scientific research groups that can be applied to ensure a successful transfer of technical software prototypes into clinical research workflows.

  15. Amorphous selenium based detectors for medical imaging applications

    Science.gov (United States)

    Mandal, Krishna C.; Kang, Sung H.; Choi, Michael; Jellison, Gerald E., Jr.

    2006-08-01

    We have developed and characterized large volume amorphous (a-) selenium (Se) stabilized alloys for room temperature medical imaging devices and high-energy physics detectors. The synthesis and preparation of well-defined and high quality a-Se (B, As, Cl) alloy materials have been conducted using a specially designed alloying reactor at EIC and installed in an argon atmosphere glove box. The alloy composition has been precisely controlled and optimized to ensure good device performance. The synthesis of large volume boron (B) doped (natural and isotopic 10B) a-Se (As, Cl) alloys has been carried out by thoroughly mixing vacuum distilled and zone-refined (ZR) Se with previously synthesized Se-As master alloys, Se-Cl master alloys and B. The synthesized a-Se (B, As, Cl) alloys have been characterized by x-ray diffraction (XRD), differential scanning calorimetry (DSC), Fourier transform infra-red spectroscopy (FTIR), x-ray photoelectron spectroscopy (XPS), inductively coupled plasma mass spectroscopy (ICP-MS), and detector testing. The a- Se alloys have shown high promise for x-ray detectors with its high dark resistivity (10 10-10 13 Ωcm), good charge transport properties, and cost-effective large area scalability. Details of various steps about detector fabrication and testing of these imaging devices are also presented.

  16. Designing protein-based biomaterials for medical applications.

    Science.gov (United States)

    Gagner, Jennifer E; Kim, Wookhyun; Chaikof, Elliot L

    2014-04-01

    Biomaterials produced by nature have been honed through billions of years, evolving exquisitely precise structure-function relationships that scientists strive to emulate. Advances in genetic engineering have facilitated extensive investigations to determine how changes in even a single peptide within a protein sequence can produce biomaterials with unique thermal, mechanical and biological properties. Elastin, a naturally occurring protein polymer, serves as a model protein to determine the relationship between specific structural elements and desirable material characteristics. The modular, repetitive nature of the protein facilitates the formation of well-defined secondary structures with the ability to self-assemble into complex three-dimensional architectures on a variety of length scales. Furthermore, many opportunities exist to incorporate other protein-based motifs and inorganic materials into recombinant protein-based materials, extending the range and usefulness of these materials in potential biomedical applications. Elastin-like polypeptides (ELPs) can be assembled into 3-D architectures with precise control over payload encapsulation, mechanical and thermal properties, as well as unique functionalization opportunities through both genetic and enzymatic means. An overview of current protein-based materials, their properties and uses in biomedicine will be provided, with a focus on the advantages of ELPs. Applications of these biomaterials as imaging and therapeutic delivery agents will be discussed. Finally, broader implications and future directions of these materials as diagnostic and therapeutic systems will be explored. Copyright © 2013 Elsevier Ltd. All rights reserved.

  17. Medical Application of Spirulina platensis Derived C-Phycocyanin

    Directory of Open Access Journals (Sweden)

    Qian Liu

    2016-01-01

    Full Text Available Along with the development of marine biological pharmaceutical research, high-effective and low-toxic drugs and functional foods isolated from marine organisms have become a new field of pharmacy and bromatology. The pharmacological actions, such as anti-inflammation, antioxidation, antitumor, immunological enhancement, and hepatorenal protection of C-phycocyanin (C-PC from Spirulina platensis, have been reported, and C-PC has important value of development and utilization either as drug or as functional food. There are many researches about the various pharmacological actions and mechanisms of C-PC, but related reports are only to some extent integrated deeply and accurately enough, which put some limitations to the further application of C-PC in medicine. Particularly, with the improvement of living standards and attention to health issues, C-PC being a functional food is preferred by more and more people. C-PC is easy to get, safe, and nontoxic; thus, it has a great potential of research and development as a drug or functional food. Here, the separation and purification, physicochemical properties, physiological and pharmacological activities, safety, and some applications are reviewed to provide relevant basis for the development of natural medicine and applied products.

  18. Biological effects and medical applications of infrared radiation.

    Science.gov (United States)

    Tsai, Shang-Ru; Hamblin, Michael R

    2017-05-01

    Infrared (IR) radiation is electromagnetic radiation with wavelengths between 760nm and 100,000nm. Low-level light therapy (LLLT) or photobiomodulation (PBM) therapy generally employs light at red and near-infrared wavelengths (600-100nm) to modulate biological activity. Many factors, conditions, and parameters influence the therapeutic effects of IR, including fluence, irradiance, treatment timing and repetition, pulsing, and wavelength. Increasing evidence suggests that IR can carry out photostimulation and photobiomodulation effects particularly benefiting neural stimulation, wound healing, and cancer treatment. Nerve cells respond particularly well to IR, which has been proposed for a range of neurostimulation and neuromodulation applications, and recent progress in neural stimulation and regeneration are discussed in this review. The applications of IR therapy have moved on rapidly in recent years. For example, IR therapy has been developed that does not actually require an external power source, such as IR-emitting materials, and garments that can be powered by body heat alone. Another area of interest is the possible involvement of solar IR radiation in photoaging or photorejuvenation as opposites sides of the coin, and whether sunscreens should protect against solar IR? A better understanding of new developments and biological implications of IR could help us to improve therapeutic effectiveness or develop new methods of PBM using IR wavelengths. Copyright © 2016. Published by Elsevier B.V.

  19. [Impact of a software application to improve medication reconciliation at hospital discharge].

    Science.gov (United States)

    Corral Baena, S; Garabito Sánchez, M J; Ruíz Rómero, M V; Vergara Díaz, M A; Martín Chacón, E R; Fernández Moyano, A

    2014-01-01

    To assess the impact of a software application to improve the quality of information concerning current patient medications and changes on the discharge report after hospitalization. To analyze the incidence of errors and to classify them. Quasi-experimental pre / post study with non-equivalent control group study. Medical patients at hospital discharge. implementation of a software application. Percentage of reconciled patient medication on discharge, and percentage of patients with more than one unjustified discrepancy. A total of 349 patients were assessed; 199 (pre-intervention phase) and 150 (post-intervention phase). Before the implementation of the application in 157 patients (78.8%) medication reconciliation had been completed; finding reconciliation errors in 99 (63.0%). The most frequent type of error, 339 (78.5%), was a missing dose or administration frequency information. After implementation, all the patient prescriptions were reconciled when the software was used. The percentage of patients with unjustified discrepancies decreased from 63.0% to 11.8% with the use of the application (psoftware application has been shown to improve the quality of the information on patient treatment on the hospital discharge report, but it is still necessary to continue development as a strategy for improving medication reconciliation. Copyright © 2014 SECA. Published by Elsevier Espana. All rights reserved.

  20. An evaluation on CT image acquisition method for medical VR applications

    Science.gov (United States)

    Jang, Seong-wook; Ko, Junho; Yoo, Yon-sik; Kim, Yoonsang

    2017-02-01

    Recent medical virtual reality (VR) applications to minimize re-operations are being studied for improvements in surgical efficiency and reduction of operation error. The CT image acquisition method considering three-dimensional (3D) modeling for medical VR applications is important, because the realistic model is required for the actual human organ. However, the research for medical VR applications has focused on 3D modeling techniques and utilized 3D models. In addition, research on a CT image acquisition method considering 3D modeling has never been reported. The conventional CT image acquisition method involves scanning a limited area of the lesion for the diagnosis of doctors once or twice. However, the medical VR application is required to acquire the CT image considering patients' various postures and a wider area than the lesion. A wider area than the lesion is required because of the necessary process of comparing bilateral sides for dyskinesia diagnosis of the shoulder, pelvis, and leg. Moreover, patients' various postures are required due to the different effects on the musculoskeletal system. Therefore, in this paper, we perform a comparative experiment on the acquired CT images considering image area (unilateral/bilateral) and patients' postures (neutral/abducted). CT images are acquired from 10 patients for the experiments, and the acquired CT images are evaluated based on the length per pixel and the morphological deviation. Finally, by comparing the experiment results, we evaluate the CT image acquisition method for medical VR applications.

  1. 21 CFR 515.25 - Revocation of order refusing to approve a medicated feed mill license application or suspending...

    Science.gov (United States)

    2010-04-01

    ... medicated feed mill license application or suspending or revoking a license. 515.25 Section 515.25 Food and..., FEEDS, AND RELATED PRODUCTS MEDICATED FEED MILL LICENSE Administrative Actions on Licenses § 515.25 Revocation of order refusing to approve a medicated feed mill license application or suspending or revoking a...

  2. Systematic review on the effectiveness of augmented reality applications in medical training.

    Science.gov (United States)

    Barsom, E Z; Graafland, M; Schijven, M P

    2016-10-01

    Computer-based applications are increasingly used to support the training of medical professionals. Augmented reality applications (ARAs) render an interactive virtual layer on top of reality. The use of ARAs is of real interest to medical education because they blend digital elements with the physical learning environment. This will result in new educational opportunities. The aim of this systematic review is to investigate to which extent augmented reality applications are currently used to validly support medical professionals training. PubMed, Embase, INSPEC and PsychInfo were searched using predefined inclusion criteria for relevant articles up to August 2015. All study types were considered eligible. Articles concerning AR applications used to train or educate medical professionals were evaluated. Twenty-seven studies were found relevant, describing a total of seven augmented reality applications. Applications were assigned to three different categories. The first category is directed toward laparoscopic surgical training, the second category toward mixed reality training of neurosurgical procedures and the third category toward training echocardiography. Statistical pooling of data could not be performed due to heterogeneity of study designs. Face-, construct- and concurrent validity was proven for two applications directed at laparoscopic training, face- and construct validity for neurosurgical procedures and face-, content- and construct validity in echocardiography training. In the literature, none of the ARAs completed a full validation process for the purpose of use. Augmented reality applications that support blended learning in medical training have gained public and scientific interest. In order to be of value, applications must be able to transfer information to the user. Although promising, the literature to date is lacking to support such evidence.

  3. Radioactive ion beams for biomedical research and nuclear medical application

    CERN Document Server

    Beyer, Gerd-Jürgen

    2002-01-01

    The ISOLDE facility at CERN is the world leading on On-Line Isotope Separator installation. The main aspects which makes ISOLDE produced radio-isotopes such valuable for use in biomedical research are: the availability of exotic or uncommon radioisotopes, the high purity and the ion beam quality. A short overview on research strategies, on experimental work and application of ISOLDE produced radionuclides used in the field of biomedicine over a period of more than 2 decades will be given. Special attention will be directed to the radio- lanthanides, because they can be seen as one single element providing the unique possibility to study systematically relationships between molecule parameters and a biological response without changes in the basic tracer molecule. Among those radionuclides we find any radiation properties we wish (single photon emission) suitable for SPECT, positron emission suitable for positron emission tomography (PET), alpha -, beta /sup -/- and Auger electron emission. (21 refs).

  4. Radioactive indicators in biology and their medical applications

    International Nuclear Information System (INIS)

    Morel, F.

    1950-12-01

    This talk was given at the society of promotion of the national industry on December 1, 1949. The report is a pre-print of an article published in L'Industrie Nationale no.2 (1950). It presents the state-of-the-art of the use of artificial radioisotopes in biology and medicine: 1 - definitions (isotopes, decay, radiation emission); 2 - modalities of the use of radioisotopes in biology: basic instrumentation (Geiger-Mueller counter, counting techniques, photography, auto-histo-radiography); 3 - applications in physiology (digestive absorption, excretion, vascular exchanges, tracer techniques) and biochemistry (metabolism, thyroxine synthesis and fixation indicators, tracer techniques for drugs); 4 - radiotherapy, internal and external irradiation. (J.S.)

  5. State of the art in medical applications using non-thermal atmospheric pressure plasma

    Science.gov (United States)

    Tanaka, Hiromasa; Ishikawa, Kenji; Mizuno, Masaaki; Toyokuni, Shinya; Kajiyama, Hiroaki; Kikkawa, Fumitaka; Metelmann, Hans-Robert; Hori, Masaru

    2017-12-01

    Plasma medical science is a novel interdisciplinary field that combines studies on plasma science and medical science, with the anticipation that understanding the scientific principles governing plasma medical science will lead to innovations in the field. Non-thermal atmospheric pressure plasma has been used for medical treatments, such as for cancer, blood coagulation, and wound healing. The interactions that occur between plasma and cells/tissues have been analyzed extensively. Direct and indirect treatment of cells with plasma has broadened the applications of non-thermal atmospheric pressure plasma in medicine. Examples of indirect treatment include plasma-assisted immune-therapy and plasma-activated medium. Controlling intracellular redox balance may be key in plasma cancer treatment. Animal studies are required to test the effectiveness and safety of these treatments for future clinical applications.

  6. Datenschutz- und Medizinprodukterecht bei Ubiquitous Computing-Anwendungen im Gesundheitssektor / Data protection and medical product law with respect to medical ubiquitous computing applications

    Directory of Open Access Journals (Sweden)

    Skistims, Hendrik

    2011-01-01

    Full Text Available With respect to ubiquitous computing there is a great potential of application, particularly in medicine and health care. This work deals with the legal problems which ubiquitous computing is facing in these areas. At the beginning, issues with respect to data protection and professional secrecy are treated. Afterwards the problem of applicability of medical product law for medical ubiquitous computing applications as well as the resulting requirements for manufactures, operators and users will be discussed.

  7. Country status of application, manufacturing and sterilization of single-use medical products

    International Nuclear Information System (INIS)

    Norimah Yusof

    1986-01-01

    The paper reviews the current status of application of single-use medical products in Malaysia. The status of their manufacturing and sterilization is also discussed. The increasing production of such items calls for a more reliable and efficient sterilization technique in particular, radiation sterilization. In line with the demand and the effort to increase local production of medical products, UTN would be providing irradiation service together with research and development in this particular field by 1988. (author)

  8. Radiation protection requirements for medical application of ionizing radiation in the Republic of Macedonia

    International Nuclear Information System (INIS)

    Nestoroska, Svetlana; Angelovski, Goran; Shahin, Nuzi

    2010-01-01

    In this paper, the regulatory infrastructure in radiation protection in the Republic of Macedonia is presented. The national radiation protection requirements for the medical application of ionizing radiation are reviewed for both occupational exposed persons and patients undergoing a medical treatment with ionizing radiation and their compliance with the international standards is considered. The gaps identified on the national level are presented and steps for overcoming such gaps are analyzed.(Author)

  9. Field-testing the new DECtalk PC system for medical applications

    Science.gov (United States)

    Grams, R. R.; Smillov, A.; Li, B.

    1992-01-01

    Synthesized human speech has now reached a new level of performance. With the introduction of DEC's new DECtalk PC, the small system developer will have a very powerful tool for creative design. It has been our privilege to be involved in the beta-testing of this new device and to add a medical dictionary which covers a wide range of medical terminology. With the inherent board level understanding of speech synthesis and the medical dictionary, it is now possible to provide full digital speech output for all medical files and terms. The application of these tools will cover a wide range of options for the future and allow a new dimension in dealing with the complex user interface experienced in medical practice.

  10. Medical imaging education in biomedical engineering curriculum: courseware development and application through a hybrid teaching model.

    Science.gov (United States)

    Zhao, Weizhao; Li, Xiping; Chen, Hairong; Manns, Fabrice

    2012-01-01

    Medical Imaging is a key training component in Biomedical Engineering programs. Medical imaging education is interdisciplinary training, involving physics, mathematics, chemistry, electrical engineering, computer engineering, and applications in biology and medicine. Seeking an efficient teaching method for instructors and an effective learning environment for students has long been a goal for medical imaging education. By the support of NSF grants, we developed the medical imaging teaching software (MITS) and associated dynamic assessment tracking system (DATS). The MITS/DATS system has been applied to junior and senior medical imaging classes through a hybrid teaching model. The results show that student's learning gain improved, particularly in concept understanding and simulation project completion. The results also indicate disparities in subjective perception between junior and senior classes. Three institutions are collaborating to expand the courseware system and plan to apply it to different class settings.

  11. Differential barometric-based positioning technique for indoor elevation measurement in IoT medical applications.

    Science.gov (United States)

    Wang, Hua; Wen, Yingyou; Zhao, Dazhe

    2017-07-20

    Medical applications have begun to benefit from Internet of Things (IoT) technology through the introduction of wearable devices. Several medical applications require accurate patient location as various changes affect pressure parameters inside the body. This study aims to develop a system to measure indoor altitude for IoT medical applications. We propose a differential barometric-based positioning system to estimate the altitude between a reference sensor and a localizing sensor connected to the human body. The differential barometric altimetry model is introduced to estimate indoor elevations and eliminate environmental artifacts. In addition, a Gaussian filter processing is adopted to remove noise from the elevation measurements. The proposed system is then investigated through extensive experiments, using various evaluation criteria. The results indicate that the proposed system yielded good accuracy with reduced implementation complexity and fewer costs. The proposed system is resilient compared to other indoor localization approaches, even when numerous environmental artifacts in indoor environments are present.

  12. Ethics of emergent information and communication technology applications in humanitarian medical assistance.

    Science.gov (United States)

    Hunt, Matthew; Pringle, John; Christen, Markus; Eckenwiler, Lisa; Schwartz, Lisa; Davé, Anushree

    2016-07-01

    New applications of information and communication technology (ICT) are shaping the way we understand and provide humanitarian medical assistance in situations of disaster, disease outbreak or conflict. Each new crisis appears to be accompanied by advancements in humanitarian technology, leading to significant improvements in the humanitarian aid sector. However, ICTs raise ethical questions that warrant attention. Focusing on the context of humanitarian medical assistance, we review key domains of ICT innovation. We then discuss ethical challenges and uncertainties associated with the development and application of new ICTs in humanitarian medical assistance, including avoiding harm, ensuring privacy and security, responding to inequalities, demonstrating respect, protecting relationships, and addressing expectations. In doing so, we emphasize the centrality of ethics in humanitarian ICT design, application and evaluation. © The Author 2016. Published by Oxford University Press on behalf of Royal Society of Tropical Medicine and Hygiene. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  13. Visual servoing in medical robotics: a survey. Part II: tomographic imaging modalities--techniques and applications.

    Science.gov (United States)

    Azizian, Mahdi; Najmaei, Nima; Khoshnam, Mahta; Patel, Rajni

    2015-03-01

    Intraoperative application of tomographic imaging techniques provides a means of visual servoing for objects beneath the surface of organs. The focus of this survey is on therapeutic and diagnostic medical applications where tomographic imaging is used in visual servoing. To this end, a comprehensive search of the electronic databases was completed for the period 2000-2013. Existing techniques and products are categorized and studied, based on the imaging modality and their medical applications. This part complements Part I of the survey, which covers visual servoing techniques using endoscopic imaging and direct vision. The main challenges in using visual servoing based on tomographic images have been identified. 'Supervised automation of medical robotics' is found to be a major trend in this field and ultrasound is the most commonly used tomographic modality for visual servoing. Copyright © 2014 John Wiley & Sons, Ltd.

  14. Development of Porous Piezoceramics for Medical and Sensor Applications

    Directory of Open Access Journals (Sweden)

    Erling Ringgaard

    2015-12-01

    Full Text Available The use of porosity to modify the functional properties of piezoelectric ceramics is well known in the scientific literature as well as by the industry, and porous ceramic can be seen as a 2-phase composite. In the present work, examples are given of applications where controlled porosity is exploited in order to optimise the dielectric, piezoelectric and acoustic properties of the piezoceramics. For the optimisation efforts it is important to note that the thickness coupling coefficient kt will be maximised for some non-zero value of the porosity that could be above 20%. On the other hand, with a good approximation, the acoustic velocity decreases linearly with increasing porosity, which is obviously also the case for the density. Consequently, the acoustic impedance shows a rather strong decrease with porosity, and in practice a reduction of more than 50% may be obtained for an engineered porous ceramic. The significance of the acoustic impedance is associated with the transmission of acoustic signals through the interface between the piezoceramic and some medium of propagation, but when the porous ceramic is used as a substrate for a piezoceramic thick film, the attenuation may be equally important. In the case of open porosity it is possible to introduce a liquid into the pores, and examples of modifying the properties in this way are given.

  15. Medical and radiobiological applications at the research reactor TRIGA Mainz

    International Nuclear Information System (INIS)

    Hampel, G.; Grunewald, C.; Kratz, J.-V.; Schmitz, T.; Schutz, C.; Werner, S.; Appelman, K.; Moss, R.; Blaickner, M.; Nawroth, T.; Otto, G.; Schmidberger, H.

    2010-01-01

    At the University of Mainz, Germany, a boron neutron capture therapy (BNCT) project has been started with the aim to expand and advance the research on the basis of the TAOrMINA protocol for the BNCT treatment of liver metastases of colorectal cancer. Irradiations take place at the TRIGA Mark II reactor. Biological and clinical research and surgery take place at the University and its hospital of Mainz. Both are situated in close vicinity to each other, which is an ideal situation for BNCT treatment, as similarly performed in Pavia, in 2001 and 2003. The application of BNCT to auto-transplanted organs requires development in the methodology, as well as regard to the irradiation facility and is part of the complex, interdisciplinary treatment process. The additional high surgical risk of auto-transplantation is only justified when a therapeutic benefit can be achieved. A BNCT protocol including explantation and conservation of the organ, neutron irradiation and re-implantation is logistically a very challenging task. Within the last years, research on all scientific, clinical and logistical aspects for the therapy has been performed. This includes work on computational modelling for the irradiation facility, tissue and blood analysis, radiation biology, dosimetry and surgery. Most recently, a clinical study on boron uptake in both healthy and tumour tissue of the liver and issues regarding dosimetry has been started, as well as a series of cell-biology experiments to obtain concrete results on the relative biological effectiveness (RBE) of ionizing radiation in liver tissue. (author)

  16. A Medical Application of Nuclear Physics: Particle Radiotherapy with Protons

    Science.gov (United States)

    Farr, Jonathan B.

    2006-10-01

    Since the discovery of radiation, applications have been made to medicine. The advent of higher energy particle accelerators in the second half of the twentieth century enabled modern tele-therapy using relatively high energy x-rays and particles. Today mega-voltage (MV) x-rays are the most common modality of delivering high doses of potentially life saving radiation to a wide variety of disease, mostly malignant cancers. However, the maximum radiation dose that can be delivered is always limited by the effects to critical surrounding biologic structures. In many cases, due to their physical properties, ``heavy'' particle radiotherapy with protons and light ions may provide an advantage in this respect over MV x-rays allowing either a higher dose of radiation to be delivered to the volume or, for the same dose, reducing the concomitant damage to critical structures. This motivation, together with recent advances in particle therapy systems that are making the technology more readily available, is serving to grow the field of particle therapy. In particular, treatment with fast protons is becoming more widespread with over 20 facilities operating worldwide and more under construction. This presentation will provide an introduction to heavy particle therapy and additional details specifically on proton therapy.

  17. Properties of titanium-alloyed DLC layers for medical applications

    Science.gov (United States)

    Joska, Ludek; Fojt, Jaroslav; Cvrcek, Ladislav; Brezina, Vitezslav

    2014-01-01

    DLC-type layers offer a good potential for application in medicine, due to their excellent tribological properties, chemical resistance, and bio-inert character. The presented study has verified the possibility of alloying DLC layers with titanium, with coatings containing three levels of titanium concentration prepared. Titanium was present on the surface mainly in the form of oxides. Its increasing concentration led to increased presence of titanium carbide as well. The behavior of the studied systems was stable during exposure in a physiological saline solution. Electrochemical impedance spectra practically did not change with time. Alloying, however, changed the electrochemical behavior of coated systems in a significant way: from inert surface mediating only exchange reactions of the environment in the case of unalloyed DLC layers to a response corresponding rather to a passive surface in the case of alloyed specimens. The effect of DLC layers alloying with titanium was tested by the interaction with a simulated body fluid, during which precipitation of a compound containing calcium and phosphorus - basic components of the bone apatite - occurred on all doped specimens, in contrast to pure DLC. The results of the specimens' surface colonization with cells test proved the positive effect of titanium in the case of specimens with a medium and highest content of this element. PMID:25093457

  18. Fabrication of intense neutron sources for medical applications

    International Nuclear Information System (INIS)

    Boulogne, A.R.; Walker, V.W.

    1975-01-01

    Simulated sources containing 252 Cf equivalents of 0.1 to 1.0 milligrams were prepared. Samarium was used as the simulant in a modified chemical plating technique similar to that used to prepare palladium-californium oxide cermet for industrial applications. The length of the platinum-10 percent iridium doubly encapsulated source with its protective sheath is 0.545 in. (14.1 mm). Outside dia of the source, including its sheath, is 0.109 in. (2.8 mm). Existing ''Brachytrons'' can accommodate this source form. This capsule system will withstand internal gas pressures from helium due to alpha decay and fission gases from a 1 mg 252 Cf source after ten years if the source is subjected to a maximum temperature of 800 0 C, the theoretical temperature of an accidental fire. Under these conditions the safety factor is 3. The capsule system is being tested with tracer amounts of 252 Cf to ensure that it will withstand adverse service conditions as well as tests specified for Special Form Materials. (auth)

  19. Coating of gold nanoparticles for medical application: UV-VIS

    Science.gov (United States)

    Martínez Espinosa, Juan Carlos; Ramírez, Nayem Amtanus Chequer; Funes Oliva, Luis Enrique; Córdova Fraga, Teodoro; Bernal Alvarado, Jesús; Reyes Pablo, Aldelmo; Núñez, Anita Rosa Elvira

    2014-11-01

    The use of nanostructured materials has gained strength in recent years in the biomedical area; new applications such as the detection of components in living cells have been used in pharmaceutical area, specifically to study the interaction of various antitumor drugs in living tissues, the detection of genes that are closely related to some type of cancer, as well as the detections of protein biomarkers for diseases also have been studied in various research laboratories around of the world. In this work, we characterize the variation of the absorbance of gold nanoparticles (GNPs) coated with different concentration of Bovine Serum Albumin (BSA) protein. We use GNPS of 60 nm of the trademark-TED PELLA, the BSA protein trademark of Sigma Aldrich and based on that proposed protocol by Chithrani et al., 2009 with purposes to obtain an alternative model to determine the optimal stability of the nanoparticles coated with the protein. The colloidal solutions were prepared with BSA at different concentrations (0.25, 0.5, 0.75 and 1% M/V), and were centrifuged at 15,000 rpm for 90 minutes (centrifuge Model Z383K) and a constant temperature of 25 °C. All the spectra sets were obtained within the range from 400 to 700 nm using an UV-VIS spectrophotometer (Thermo Scientific Model 51118650). The results showed a R2 of 0.99 for an exponential curve correlation between the concentration of BSA, and the absorbance measured. We found at higher concentrations of BSA, there is a decrease in the intensity of the absorption spectra in the plasmon resonance. This preliminary model obtained can be used in the stabilization of gold nanoparticles with different proteins of biomedical interest in future experiments and support for functionalization of GNPs with specific membrane markers.

  20. Medical application of in vivo neutron activation analysis

    International Nuclear Information System (INIS)

    Cohn, S.H.; Ellis, K.J.; Vartsky, D.; Zanzi, I.; Aloia, J.F.

    1978-01-01

    The clinical usefulness of total body neutron activation analysis (TBNAA) was clearly established at an IAEA panel meeting in Vienna in 1972. It is best demonstrated by the studies involving the measurement of total-body calcium. This measurement provides data useful for the diagnosis and management of metabolic bone disorders. It should be emphasized, however, that while most of the applications to date have involved calcium and phosphorus, the measurement of sodium, chlorine and nitrogen also appear to be useful clinically. Total-body calcium measurements utilizing TBNAA have been used in studies of osteoporosis to establish absolute and relative deficits of calcium in patients with this disease in comparison to a normal contrast population. Changes in total-body calcium (skeletal mass) have also been useful for quantitating the efficacy of various therapies in osteoporosis. Serial measurements over periods of years provide long-term balance data by direct measurement with a higher precision (+- 2%) than is possible by the use of any other technique. In the renal osteodystrophy observed in patients with renal failure, disorders of both calcium and phosphorus, as well as electrolyte disturbances, have been studied. The measure of total-body levels of these elements gives the clinician useful data upon which to design dialysis therapy. The measurement of bone changes in endocrine dysfunction has been studied, particularly in patients with thyroid and parathyroid disorders. In parathyroidectomy, the measurement of total-body calcium, post-operatively, can indicate the degree of bone resorption. Skeletal metabolism and body composition in acromegaly and Cushing's disease have also been investigated by TBNAA. Levels of cadmium in liver and kidney have also been measured in-vivo by prompt-gamma neutron activation and associated with hypertension, emphysema and cigarette smoking

  1. Medical application of in vivo neutron activation analysis

    Energy Technology Data Exchange (ETDEWEB)

    Cohn, S.H.; Ellis, K.J.; Vartsky, D.; Zanzi, I.; Aloia, J.F.

    1978-01-01

    The clinical usefulness of total body neutron activation analysis (TBNAA) was clearly established at an IAEA panel meeting in Vienna in 1972. It is best demonstrated by the studies involving the measurement of total-body calcium. This measurement provides data useful for the diagnosis and management of metabolic bone disorders. It should be emphasized, however, that while most of the applications to date have involved calcium and phosphorus, the measurement of sodium, chlorine and nitrogen also appear to be useful clinically. Total-body calcium measurements utilizing TBNAA have been used in studies of osteoporosis to establish absolute and relative deficits of calcium in patients with this disease in comparison to a normal contrast population. Changes in total-body calcium (skeletal mass) have also been useful for quantitating the efficacy of various therapies in osteoporosis. Serial measurements over periods of years provide long-term balance data by direct measurement with a higher precision (+- 2%) than is possible by the use of any other technique. In the renal osteodystrophy observed in patients with renal failure, disorders of both calcium and phosphorus, as well as electrolyte disturbances, have been studied. The measure of total-body levels of these elements gives the clinician useful data upon which to design dialysis therapy. The measurement of bone changes in endocrine dysfunction has been studied, particularly in patients with thyroid and parathyroid disorders. In parathyroidectomy, the measurement of total-body calcium, post-operatively, can indicate the degree of bone resorption. Skeletal metabolism and body composition in acromegaly and Cushing's disease have also been investigated by TBNAA. Levels of cadmium in liver and kidney have also been measured in-vivo by prompt-gamma neutron activation and associated with hypertension, emphysema and cigarette smoking.

  2. Report on Workshop 'Radiation protection of the 'consumer' of medical irradiation applications'

    International Nuclear Information System (INIS)

    Geus, W.W.A.A.

    1989-01-01

    The Main division Radioactivity and Applications of Radiation of the Dutch Department of Welfare, Public Health and Culture has organized a 'workshop' on the protection of the patient ( or consumer) in medical applications of radiation. The EG guideline of september 3rd 1984 'In behalf of assessment of fundamental measures with regard to radiation protection of persons who are examined or treated medically' and the advice of the National Council for Public Health brought out thereabout in april 1988, served as background of the contributions and discussions presented in this collection. (H.W.). Refs.; figs.; tabs

  3. [Application Progress of Three-dimensional Laser Scanning Technology in Medical Surface Mapping].

    Science.gov (United States)

    Zhang, Yonghong; Hou, He; Han, Yuchuan; Wang, Ning; Zhang, Ying; Zhu, Xianfeng; Wang, Mingshi

    2016-04-01

    The booming three-dimensional laser scanning technology can efficiently and effectively get spatial three-dimensional coordinates of the detected object surface and reconstruct the image at high speed,high precision and large capacity of information.Non-radiation,non-contact and the ability of visualization make it increasingly popular in three-dimensional surface medical mapping.This paper reviews the applications and developments of three-dimensional laser scanning technology in medical field,especially in stomatology,plastic surgery and orthopedics.Furthermore,the paper also discusses the application prospects in the future as well as the biomedical engineering problems it would encounter with.

  4. [Medical school admission test at the University of Goettingen - which applicants will benefit?].

    Science.gov (United States)

    Simmenroth-Nayda, Anne; Meskauskas, Erik; Burckhardt, Gerhard; Görlich, Yvonne

    2014-01-01

    Medical schools in Germany may select 60% of the student applicants through their own admission tests. The influence of the school-leaving examination grades (EGs) in each of the procedural steps is controversial. At Goettingen Medical School, we combine a structured interview and a communicative skills assessment. We analysed how many applicants succeeded in our admission test, compared to a model which only takes EGs into account. Admission scores were transferred into SPSS-21. Sociodemographic data were submitted by the Stiftung Hochschulstart. Besides descriptive statistics, we used Pearson-correlation and means comparisons (t-test, analysis of variance). 221 applicants (EGs 1.0-1.9) were invited in the winter semester 2013/14 and 222 applicants (EGs 1.1-1.8) in the summer semester 2014. The proportion of women was 68% (winter) and 74% (summer). Sixteen and 37 applicants had a medical vocational training and performed slightly better. The analysis showed that our test was gender neutral. EGs did not correlate with interviews or skills assessment. Despite a two-fold impact of EGs, 26 (winter) and 44 (summer) of the overall 181 applicants had EGs of 1.4 -1.9, which would have been too low for admission otherwise. If EGs were only considered once, 40 (winter) and 59 (summer) applicants would have succeeded. Copyright © 2014. Published by Elsevier GmbH.

  5. Medical imaging in clinical applications algorithmic and computer-based approaches

    CERN Document Server

    Bhateja, Vikrant; Hassanien, Aboul

    2016-01-01

    This volume comprises of 21 selected chapters, including two overview chapters devoted to abdominal imaging in clinical applications supported computer aided diagnosis approaches as well as different techniques for solving the pectoral muscle extraction problem in the preprocessing part of the CAD systems for detecting breast cancer in its early stage using digital mammograms. The aim of this book is to stimulate further research in medical imaging applications based algorithmic and computer based approaches and utilize them in real-world clinical applications. The book is divided into four parts, Part-I: Clinical Applications of Medical Imaging, Part-II: Classification and clustering, Part-III: Computer Aided Diagnosis (CAD) Tools and Case Studies and Part-IV: Bio-inspiring based Computer Aided diagnosis techniques. .

  6. Security Issues in Healthcare Applications Using Wireless Medical Sensor Networks: A Survey

    OpenAIRE

    Hoon-Jae Lee; Pardeep Kumar

    2011-01-01

    Healthcare applications are considered as promising fields for wireless sensor networks, where patients can be monitored using wireless medical sensor networks (WMSNs). Current WMSN healthcare research trends focus on patient reliable communication, patient mobility, and energy-efficient routing, as a few examples. However, deploying new technologies in healthcare applications without considering security makes patient privacy vulnerable. Moreover, the physiological data of an individual are ...

  7. [Development and evaluation of the medical imaging distribution system with dynamic web application and clustering technology].

    Science.gov (United States)

    Yokohama, Noriya; Tsuchimoto, Tadashi; Oishi, Masamichi; Itou, Katsuya

    2007-01-20

    It has been noted that the downtime of medical informatics systems is often long. Many systems encounter downtimes of hours or even days, which can have a critical effect on daily operations. Such systems remain especially weak in the areas of database and medical imaging data. The scheme design shows the three-layer architecture of the system: application, database, and storage layers. The application layer uses the DICOM protocol (Digital Imaging and Communication in Medicine) and HTTP (Hyper Text Transport Protocol) with AJAX (Asynchronous JavaScript+XML). The database is designed to decentralize in parallel using cluster technology. Consequently, restoration of the database can be done not only with ease but also with improved retrieval speed. In the storage layer, a network RAID (Redundant Array of Independent Disks) system, it is possible to construct exabyte-scale parallel file systems that exploit storage spread. Development and evaluation of the test-bed has been successful in medical information data backup and recovery in a network environment. This paper presents a schematic design of the new medical informatics system that can be accommodated from a recovery and the dynamic Web application for medical imaging distribution using AJAX.

  8. HTC Vive MeVisLab integration via OpenVR for medical applications.

    Science.gov (United States)

    Egger, Jan; Gall, Markus; Wallner, Jürgen; Boechat, Pedro; Hann, Alexander; Li, Xing; Chen, Xiaojun; Schmalstieg, Dieter

    2017-01-01

    Virtual Reality, an immersive technology that replicates an environment via computer-simulated reality, gets a lot of attention in the entertainment industry. However, VR has also great potential in other areas, like the medical domain, Examples are intervention planning, training and simulation. This is especially of use in medical operations, where an aesthetic outcome is important, like for facial surgeries. Alas, importing medical data into Virtual Reality devices is not necessarily trivial, in particular, when a direct connection to a proprietary application is desired. Moreover, most researcher do not build their medical applications from scratch, but rather leverage platforms like MeVisLab, MITK, OsiriX or 3D Slicer. These platforms have in common that they use libraries like ITK and VTK, and provide a convenient graphical interface. However, ITK and VTK do not support Virtual Reality directly. In this study, the usage of a Virtual Reality device for medical data under the MeVisLab platform is presented. The OpenVR library is integrated into the MeVisLab platform, allowing a direct and uncomplicated usage of the head mounted display HTC Vive inside the MeVisLab platform. Medical data coming from other MeVisLab modules can directly be connected per drag-and-drop to the Virtual Reality module, rendering the data inside the HTC Vive for immersive virtual reality inspection.

  9. HTC Vive MeVisLab integration via OpenVR for medical applications.

    Directory of Open Access Journals (Sweden)

    Jan Egger

    Full Text Available Virtual Reality, an immersive technology that replicates an environment via computer-simulated reality, gets a lot of attention in the entertainment industry. However, VR has also great potential in other areas, like the medical domain, Examples are intervention planning, training and simulation. This is especially of use in medical operations, where an aesthetic outcome is important, like for facial surgeries. Alas, importing medical data into Virtual Reality devices is not necessarily trivial, in particular, when a direct connection to a proprietary application is desired. Moreover, most researcher do not build their medical applications from scratch, but rather leverage platforms like MeVisLab, MITK, OsiriX or 3D Slicer. These platforms have in common that they use libraries like ITK and VTK, and provide a convenient graphical interface. However, ITK and VTK do not support Virtual Reality directly. In this study, the usage of a Virtual Reality device for medical data under the MeVisLab platform is presented. The OpenVR library is integrated into the MeVisLab platform, allowing a direct and uncomplicated usage of the head mounted display HTC Vive inside the MeVisLab platform. Medical data coming from other MeVisLab modules can directly be connected per drag-and-drop to the Virtual Reality module, rendering the data inside the HTC Vive for immersive virtual reality inspection.

  10. A review on the application of medical infrared thermal imaging in hands

    Science.gov (United States)

    Sousa, Elsa; Vardasca, Ricardo; Teixeira, Sérgio; Seixas, Adérito; Mendes, Joaquim; Costa-Ferreira, António

    2017-09-01

    Infrared Thermal (IRT) imaging is a medical imaging modality to study skin temperature in real time, providing physiological information about the underlining structures. One of the most accessible body sites to be investigated using such imaging method is the hands, which can reflect valuable information about conditions affecting the upper limbs. The aim of this review is to acquaint the successful applications of IRT in the hands with a medical scope, opening horizons for future applications based in the achieved results. A systematic literature review was performed in order to assess in which applications medical IRT imaging was applied to the hands. The literature search was conducted in the reference databases: PubMed, Scopus and ISI Web of Science, making use of keywords (hand, thermography, infrared imaging, thermal imaging) combination that were present at the title and abstract. No temporal restriction was made. As a result, 4260 articles were identified, after removal of duplicates, 3224 articles remained and from first title and abstract filtering, a total of 388 articles were considered. After application of exclusion criteria (non-availability, non-clinical applications, reviews, case studies, written in other languages than English and using liquid crystal thermography), 146 articles were considered for this review. It can be verified that thermography provides useful diagnostic and monitoring information of conditions that directly or indirectly related to hands, as well as aiding in the treatment assessment. Trends and future challenges for IRT applications on hands are provided to stimulate researchers and clinicians to explore and address them.

  11. Radiation protection and dosimetry issues in the medical applications of ionizing radiation

    International Nuclear Information System (INIS)

    Vaz, Pedro

    2014-01-01

    The technological advances that occurred during the last few decades paved the way to the dissemination of CT-based procedures in radiology, to an increasing number of procedures in interventional radiology and cardiology as well as to new techniques and hybrid modalities in nuclear medicine and in radiotherapy. These technological advances encompass the exposure of patients and medical staff to unprecedentedly high dose values that are a cause for concern due to the potential detrimental effects of ionizing radiation to the human health. As a consequence, new issues and challenges in radiological protection and dosimetry in the medical applications of ionizing radiation have emerged. The scientific knowledge of the radiosensitivity of individuals as a function of age, gender and other factors has also contributed to raising the awareness of scientists, medical staff, regulators, decision makers and other stakeholders (including the patients and the public) for the need to correctly and accurately assess the radiation induced long-term health effects after medical exposure. Pediatric exposures and their late effects became a cause of great concern. The scientific communities of experts involved in the study of the biological effects of ionizing radiation have made a strong case about the need to undertake low dose radiation research and the International System of Radiological Protection is being challenged to address and incorporate issues such as the individual sensitivities, the shape of dose–response relationship and tissue sensitivity for cancer and non-cancer effects. Some of the answers to the radiation protection and dosimetry issues and challenges in the medical applications of ionizing radiation lie in computational studies using Monte Carlo or hybrid methods to model and simulate particle transport in the organs and tissues of the human body. The development of sophisticated Monte Carlo computer programs and voxel phantoms paves the way to an accurate

  12. 76 FR 43689 - Draft Guidance for Industry and Food and Drug Administration Staff; Mobile Medical Applications...

    Science.gov (United States)

    2011-07-21

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-D-0530] Draft Guidance for Industry and Food and Drug Administration Staff; Mobile Medical Applications; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug...

  13. Hard X-Ray Phase-Contrast Imaging for Medical Applications - Physicist's Dream or Radiologist's Mainstream?

    International Nuclear Information System (INIS)

    Wilkins, S. W.; Gureyev, T. E.; Mayo, S. C.; Nesterets, Ya. I.; Pogany, A.; Stevenson, A. W.; Paganin, D. M.

    2007-01-01

    We briefly review currently practiced methods of X-ray phase contrast imaging and consider some of their relative features, especially in regard to applicability to clinical medical studies. Various related technological issues and promising future areas of development are also briefly discussed

  14. Electrical aspects of argon micro-cell plasma with applications in bio-medical technology

    NARCIS (Netherlands)

    Horiuchi, Y.; Dijk, van J.; Makabe, T.

    2003-01-01

    Argon micro-cell plasma (MCP) is believed to be a viable tool for performing micro-surgery. The non-thermal nature of the discharge allows an effective treatment of pathological tissue without causing thermal damage to its surroundings. This bio-medical application imposes a number of design

  15. Medical applications of membranes: Drug delivery, artificial organs and tissue engineering

    NARCIS (Netherlands)

    Stamatialis, Dimitrios; Papenburg, B.J.; Girones nogue, Miriam; Saiful, S.; Bettahalli Narasimha, M.S.; Schmitmeier, Stephanie; Wessling, Matthias

    2008-01-01

    This paper covers the main medical applications of artificial membranes. Specific attention is given to drug delivery systems, artificial organs and tissue engineering which seem to dominate the interest of the membrane community this period. In all cases, the materials, methods and the current

  16. Nanotechnology in medical applications: state-of-the-art in materials and devices

    NARCIS (Netherlands)

    Roszek B; Jong WH de; Geertsma RE; BMT

    2005-01-01

    Nanotechnology is an extremely powerful emerging technology, which is expected to have a substantial impact on medical technology now and in the future. The potential impact of novel nanomedical applications on disease diagnosis, therapy, and prevention is foreseen to change health care in a

  17. Advances in solid state laser technology for space and medical applications

    Science.gov (United States)

    Byvik, C. E.; Buoncristiani, A. M.

    1988-01-01

    Recent developments in laser technology and their potential for medical applications are discussed. Gas discharge lasers, dye lasers, excimer lasers, Nd:YAG lasers, HF and DF lasers, and other commonly used lasers are briefly addressed. Emerging laser technology is examined, including diode-pumped lasers and other solid state lasers.

  18. The application of digital medical 3D printing technology on tumor operation

    Science.gov (United States)

    Chen, Jimin; Jiang, Yijian; Li, Yangsheng

    2016-04-01

    Digital medical 3D printing technology is a new hi-tech which combines traditional medical and digital design, computer science, bio technology and 3D print technology. At the present time there are four levels application: The printed 3D model is the first and simple application. The surgery makes use of the model to plan the processing before operation. The second is customized operation tools such as implant guide. It helps doctor to operate with special tools rather than the normal medical tools. The third level application of 3D printing in medical area is to print artificial bones or teeth to implant into human body. The big challenge is the fourth level which is to print organs with 3D printing technology. In this paper we introduced an application of 3D printing technology in tumor operation. We use 3D printing to print guide for invasion operation. Puncture needles were guided by printed guide in face tumors operation. It is concluded that this new type guide is dominantly advantageous.

  19. Proceedings of the ninth annual symposium on computer applications in medical care

    International Nuclear Information System (INIS)

    Ackerman, M.J.

    1985-01-01

    This book covers the proceedings of the ninth annual symposium on computer applications in medical care. Some topics covered are: Development of a portable report writer for radiology; A new CT - aided robotic stereotaxis system; and a local-area-network based oncology microcomputer system

  20. DOE Center of Excellence in Medical Laser Applications. Final report, December 1, 1994--November 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Jacques, S.L.

    1998-01-01

    An engineering network of collaborating medical laser laboratories are developing laser and optical technologies for medical diagnosis and therapy and are translating the engineering into medical centers in Portland OR, Houston TX, and Galveston TX. The Center includes the University of Texas M.D. Anderson Cancer Center, the University of Texas-Austin, Texas A and M University, Rice University, the University Texas Medical Branch-Galveston, Oregon Medical Laser Center (Providence St. Vincent Medical Center, Oregon Health Sciences University, and Oregon Graduate Institute, Portland, OR), and the University of Oregon. Diagnostics include reflectance, fluorescence, Raman IR, laser photoacoustics, optical coherence tomography, and several new video techniques for spectroscopy and imaging. Therapies include photocoagulation therapy, laser welding, pulsed laser ablation, and light-activated chemotherapy of cancer (photodynamic therapy, or PDT). Medical applications reaching the clinic include optical monitoring of hyperbilirubinemia in newborns, fluorescence detection of cervical dysplasia, laser thrombolysis of blood clots in heart attack and brain stroke, photothermal coagulant of benign prostate hyperplasia, and PDT for both veterinary and human cancer. New technologies include laser optoacoustic imaging of breast tumors and hemorrhage in head trauma and brain stroke, quality control monitoring of dosimetry during PDT for esophageal and lung cancer, polarization video reflectometry of skin cancer, laser welding of artificial tissue replacements, and feedback control of laser welding.

  1. Evaluation of critical thinking application in medical ultrasound practice among sonographers in south-eastern Nigeria

    International Nuclear Information System (INIS)

    Agwu, K.K.; Ogbu, S.O.I.; Okpara, E.

    2007-01-01

    Purpose: To investigate the application of critical thinking (CT) in medical ultrasound by sonographers in south-eastern Nigeria as a measure of the quality of practice. Methods: A semi-structured questionnaire based on six elements of CT was distributed to 82 sonographers selected through a simple random sampling. The questionnaire investigated the application of the elements of interpretation, analysis, evaluation, inference, explanation and self-regulation involved in CT by medical sonographers. The data for each respondent were categorized into age, experience and the elements of CT. Statistical analyses were done using mean and Spearman's Rank correlation. Results: The overall mean score of the practitioners on all the elements of CT application was 8.65 ± 6.76 against a total of 60. The application of CT did not show any correlation with age or clinical experience using Spearman's Rank correlation (r = -0.017; p > 0.05 and r = -0.086; p > 0.05, respectively). Conclusions: The results show that there is poor application of CT by medical sonographers in the locality which may impact negatively on the outcome of this diagnostic process. Increase in the number of formal training programmes in sonography and inclusion of CT skills in the curriculum are recommended

  2. Review of Cyclotrons for the Production of Radioactive Isotopes for Medical and Industrial Applications

    Science.gov (United States)

    Schmor, Paul

    2011-02-01

    Radioactive isotopes are used in a wide range of medical, biological, environmental and industrial applications. Cyclotrons are the primary tool for producing the shorter-lived, proton-rich radioisotopes currently used in a variety of medical applications. Although the primary use of the cyclotron-produced short-lived radioisotopes is in PET/CT (positron emission tomography/computed tomography) and SPECT (single photon emission computed tomography) diagnostic medical procedures, cyclotrons are also producing longer-lived isotopes for therapeutic procedures as well as for other industrial and applied science applications. Commercial suppliers of cyclotrons are responding by providing a range of cyclotrons in the energy range of 3-70MeV for the differing needs of the various applications. These cyclotrons generally have multiple beams servicing multiple targets. This review article presents some of the applications of the radioisotopes and provides a comparison of some of the capabilities of the various current cyclotrons. The use of nuclear medicine and the number of cyclotrons supplying the needed isotopes are increasing. It is expected that there will soon be a new generation of small "tabletop" cyclotrons providing patient doses on demand.

  3. The FLUKA Code: Developments and Challenges for High Energy and Medical Applications

    CERN Document Server

    Böhlen, T T; Chin, M P W; Fassò, A; Ferrari, A; Ortega, P G; Mairani, A; Sala, P R; Smirnov, G; Vlachoudis, V

    2014-01-01

    The FLUKA Monte Carlo code is used extensively at CERN for all beam-machine interactions, radioprotection calculations and facility design of forthcoming projects. Such needs require the code to be consistently reliable over the entire energy range (from MeV to TeV) for all projectiles (full suite of elementary particles and heavy ions). Outside CERN, among various applications worldwide, FLUKA serves as a core tool for the HIT and CNAO hadron-therapy facilities in Europe. Therefore, medical applications further impose stringent requirements in terms of reliability and predictive power, which demands constant refinement of sophisticated nuclear models and continuous code improvement. Some of the latest developments implemented in FLUKA are presented in this paper, with particular emphasis on issues and concerns pertaining to CERN and medical applications.

  4. Dissemination of medical applications of nuclear energy with virtual reality technology

    International Nuclear Information System (INIS)

    Botelho, Felipe M.; Oliveira, Beatriz A.R.

    2007-01-01

    This work makes use of Virtual Reality technology to disseminate medical applications of nuclear energy, with educational purposes. Virtual Reality is an effective learning tool, since navigation and interaction in virtual worlds can improve motivation in the learning process. With this technology, learning can be achieved in a clearer, joyful and more objective way. Among the existing medical applications of nuclear energy, this work focuses on the use of radiopharmaceuticals. The goal is to simulate this application in a virtual environment, for educational purposes, and to show the absorption of a radiopharmaceutical by the human body, during a diagnostics or treatment procedure. An example has been chosen, for Iodine radiopharmaceutical, which has affinity with the thyroid, and then concentrates in this organ. During the simulation, the concentration of the radioactive Iodine in the thyroid can be emphasized, and in the sequence, the virtual patient can be shown during the imaging procedure. (author)

  5. Medical applications: a database and characterization of apps in Apple iOS and Android platforms.

    Science.gov (United States)

    Seabrook, Heather J; Stromer, Julie N; Shevkenek, Cole; Bharwani, Aleem; de Grood, Jill; Ghali, William A

    2014-08-27

    Medical applications (apps) for smart phones and tablet computers are growing in number and are commonly used in healthcare. In this context, there is a need for a diverse community of app users, medical researchers, and app developers to better understand the app landscape. In mid-2012, we undertook an environmental scan and classification of the medical app landscape in the two dominant platforms by searching the medical category of the Apple iTunes and Google Play app download sites. We identified target audiences, functions, costs and content themes using app descriptions and captured these data in a database. We only included apps released or updated between October 1, 2011 and May 31, 2012, with a primary "medical" app store categorization, in English, that contained health or medical content. Our sample of Android apps was limited to the most popular apps in the medical category. Our final sample of Apple iOS (n = 4561) and Android (n = 293) apps illustrate a diverse medical app landscape. The proportion of Apple iOS apps for the public (35%) and for physicians (36%) is similar. Few Apple iOS apps specifically target nurses (3%). Within the Android apps, those targeting the public dominated in our sample (51%). The distribution of app functions is similar in both platforms with reference being the most common function. Most app functions and content themes vary considerably by target audience. Social media apps are more common for patients and the public, while conference apps target physicians. We characterized existing medical apps and illustrated their diversity in terms of target audience, main functions, cost and healthcare topic. The resulting app database is a resource for app users, app developers and health informatics researchers.

  6. Security Issues in Healthcare Applications Using Wireless Medical Sensor Networks: A Survey

    Directory of Open Access Journals (Sweden)

    Hoon-Jae Lee

    2011-12-01

    Full Text Available Healthcare applications are considered as promising fields for wireless sensor networks, where patients can be monitored using wireless medical sensor networks (WMSNs. Current WMSN healthcare research trends focus on patient reliable communication, patient mobility, and energy-efficient routing, as a few examples. However, deploying new technologies in healthcare applications without considering security makes patient privacy vulnerable. Moreover, the physiological data of an individual are highly sensitive. Therefore, security is a paramount requirement of healthcare applications, especially in the case of patient privacy, if the patient has an embarrassing disease. This paper discusses the security and privacy issues in healthcare application using WMSNs. We highlight some popular healthcare projects using wireless medical sensor networks, and discuss their security. Our aim is to instigate discussion on these critical issues since the success of healthcare application depends directly on patient security and privacy, for ethic as well as legal reasons. In addition, we discuss the issues with existing security mechanisms, and sketch out the important security requirements for such applications. In addition, the paper reviews existing schemes that have been recently proposed to provide security solutions in wireless healthcare scenarios. Finally, the paper ends up with a summary of open security research issues that need to be explored for future healthcare applications using WMSNs.

  7. Security issues in healthcare applications using wireless medical sensor networks: a survey.

    Science.gov (United States)

    Kumar, Pardeep; Lee, Hoon-Jae

    2012-01-01

    Healthcare applications are considered as promising fields for wireless sensor networks, where patients can be monitored using wireless medical sensor networks (WMSNs). Current WMSN healthcare research trends focus on patient reliable communication, patient mobility, and energy-efficient routing, as a few examples. However, deploying new technologies in healthcare applications without considering security makes patient privacy vulnerable. Moreover, the physiological data of an individual are highly sensitive. Therefore, security is a paramount requirement of healthcare applications, especially in the case of patient privacy, if the patient has an embarrassing disease. This paper discusses the security and privacy issues in healthcare application using WMSNs. We highlight some popular healthcare projects using wireless medical sensor networks, and discuss their security. Our aim is to instigate discussion on these critical issues since the success of healthcare application depends directly on patient security and privacy, for ethic as well as legal reasons. In addition, we discuss the issues with existing security mechanisms, and sketch out the important security requirements for such applications. In addition, the paper reviews existing schemes that have been recently proposed to provide security solutions in wireless healthcare scenarios. Finally, the paper ends up with a summary of open security research issues that need to be explored for future healthcare applications using WMSNs.

  8. A clean bill of health for CERN’s medical applications office

    CERN Multimedia

    2014-01-01

    Many of you will have had the opportunity to follow the seminar on medical applications given by two members of our new International Strategy Committee for medical applications on 20 November. This occasion gives me a good opportunity to take stock of what’s been achieved since we set up our office for medical applications under Steve Myers almost a year ago.   It’s already an impressive list of achievements, and one that’s poised to grow. The International Strategy Committee is perhaps the most visible part of it. Meeting for the first time last week, the Committee will help us focus and prioritise our efforts so we can extract the maximum benefit. The existence of the office itself is already a major step in this direction: today, instead of having seven separate medical initiatives at CERN, we have a single coordinated approach and each component benefits. Let’s take a look at the current state of progress. The study to develop LEIR into the OPENM...

  9. Usability Evaluation of An Electronic Medication Administration Record (eMAR) Application

    Science.gov (United States)

    Guo, J.; Iribarren, S.; Kapsandoy, S.; Perri, S.; Staggers, N.

    2011-01-01

    Background Electronic medication administration records (eMARs) have been widely used in recent years. However, formal usability evaluations are not yet available for these vendor applications, especially from the perspective of nurses, the largest group of eMAR users. Objective To conduct a formal usability evaluation of an implemented eMAR. Methods Four evaluators examined a commercial vendor eMAR using heuristic evaluation techniques. The evaluators defined seven tasks typical of eMAR use and independently evaluated the application. Consensus techniques were used to obtain 100% agreement of identified usability problems and severity ratings. Findings were reviewed with 5 clinical staff nurses and the Director of Clinical Informatics who verified findings with a small group of clinical nurses. Results Evaluators found 60 usability problems categorized into 233 heuristic violations. Match, Error, and Visibility heuristics were the most frequently violated. Administer Medication and Order and Modify Medications tasks had the highest number of heuristic violations and usability problems rated as major or catastrophic. Conclusion The high number of usability problems could impact the effectiveness, efficiency and satisfaction of nurses’ medication administration activities and may include concerns about patient safety. Usability is a joint responsibility between sites and vendors. We offer a call to action for usability evaluations at all sites and eMAR application redesign as necessary to improve the user experience and promote patient safety. PMID:23616871

  10. The electronic residency application service application can predict accreditation council for graduate medical education competency-based surgical resident performance.

    Science.gov (United States)

    Tolan, Amy M; Kaji, Amy H; Quach, Chi; Hines, O Joe; de Virgilio, Christian

    2010-01-01

    Program directors often struggle to determine which factors in the Electronic Residency Application Service (ERAS) application are important in the residency selection process. With the establishment of the Accreditation Council for Graduate Medical Education (ACGME) competencies, it would be important to know whether information available in the ERAS application can predict subsequent competency-based performance of general surgery residents. This study is a retrospective correlation of data points found in the ERAS application with core competency-based clinical rotation evaluations. ACGME competency-based evaluations as well as technical skills assessment from all rotations during residency were collected. The overall competency score was defined as an average of all 6 competencies and technical skills. A total of77 residents from two (one university and one community based university-affiliate) general surgery residency programs were included in the analysis. Receiving honors for many of the third year clerkships and AOA membership were associated with a number of the individual competencies. USMLE scores were predictive only of Medical Knowledge (p = 0.004). Factors associated with higher overall competency were female gender (p = 0.02), AOA (p = 0.06), overall number of honors received (p = 0.04), and honors in Ob/Gyn (p = 0.03) and Pediatrics (p = 0.05). Multivariable analysis showed honors in Ob/Gyn, female gender, older age, and total number of honors to be predictive of a number of individual core competencies. USMLE scores were only predictive of Medical Knowledge. The ERAS application is useful for predicting subsequent competency based performance in surgical residents. Receiving honors in the surgery clerkship, which has traditionally carried weight when evaluating a potential surgery resident, may not be as strong a predictor of future success. Copyright © 2010 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights

  11. Rough-fuzzy pattern recognition applications in bioinformatics and medical imaging

    CERN Document Server

    Maji, Pradipta

    2012-01-01

    Learn how to apply rough-fuzzy computing techniques to solve problems in bioinformatics and medical image processing Emphasizing applications in bioinformatics and medical image processing, this text offers a clear framework that enables readers to take advantage of the latest rough-fuzzy computing techniques to build working pattern recognition models. The authors explain step by step how to integrate rough sets with fuzzy sets in order to best manage the uncertainties in mining large data sets. Chapters are logically organized according to the major phases of pattern recognition systems dev

  12. A flexible mobile-device biosensing instrumentation platform for point-of-care medical diagnostics applications

    DEFF Research Database (Denmark)

    Patou, François; Pfreundt, Andrea; Zulfiqar, Azeem

    2014-01-01

    helping to address this challenge. Specifically, Lab-on-Chip (LoC) devices have a key role to play in the advent of Point-of-Care (PoC) medical applications, driving a shift of the medical diagnostics paradigm and the transition from a centralized, technical, high-throughput biological sample analysis...... programmable electrical readout from LoCs potentially comprehending varied transducers addressing different targeted biological markers. A smart-phone/tablet docking-station embeds the hardware interface necessary for the implementation of a smart-phone digital lock-in amplifier. The platform is tested...

  13. An Overview of Recent Application of Medical Infrared Thermography in Sports Medicine in Austria

    Directory of Open Access Journals (Sweden)

    Carolin Hildebrandt

    2010-05-01

    Full Text Available Medical infrared thermography (MIT is used for analyzing physiological functions related to skin temperature. Technological advances have made MIT a reliable medical measurement tool. This paper provides an overview of MIT´s technical requirements and usefulness in sports medicine, with a special focus on overuse and traumatic knee injuries. Case studies are used to illustrate the clinical applicability and limitations of MIT. It is concluded that MIT is a non-invasive, non-radiating, low cost detection tool which should be applied for pre-scanning athletes in sports medicine.

  14. Frontier of Advanced Accelerator Applications and Medical Treatments Using Nuclear Techniques. Abstract

    International Nuclear Information System (INIS)

    2015-01-01

    To address the challenges of research-based practice, developing advanced accelerator applications, and medical treatments using nuclear tecniqoes, researchers from Rajamakala University of Technology Lanna, Office of Atoms for Peace, and Chiang Mai University have joined in hosting this conference. Nuclear medicine, amedical specialty, diagnoses and treats diseases in a safe and painless way. Nuclear techniques can determine medical information that may otherwise be unavailable, require surgery, or necessitate more expensive and invasive diagnostic tests. Advance in nuclear techniques also offer the potential to detect abnormalities at earlier stages, leasding to earlier treatment and a more successful prognosis.

  15. [The Application of the Fault Tree Analysis Method in Medical Equipment Maintenance].

    Science.gov (United States)

    Liu, Hongbin

    2015-11-01

    In this paper, the traditional fault tree analysis method is presented, detailed instructions for its application characteristics in medical instrument maintenance is made. It is made significant changes when the traditional fault tree analysis method is introduced into the medical instrument maintenance: gave up the logic symbolic, logic analysis and calculation, gave up its complicated programs, and only keep its image and practical fault tree diagram, and the fault tree diagram there are also differences: the fault tree is no longer a logical tree but the thinking tree in troubleshooting, the definition of the fault tree's nodes is different, the composition of the fault tree's branches is also different.

  16. A qualitative analysis of statements on motivation of applicants for medical school.

    Science.gov (United States)

    Wouters, Anouk; Bakker, Anneke H; van Wijk, Inge J; Croiset, Gerda; Kusurkar, Rashmi A

    2014-09-23

    Selection committees try to ascertain that motivated students are selected for medical school. Self-determination theory stresses that the type of motivation is more important than the quantity of motivation. Autonomous motivation, compared to controlled motivation, in students leads to better learning outcomes. Applicants can express their motivation in written statements, a selection tool which has been found to elicit heterogeneous responses, hampering the comparison of applicants. This study investigates the content of applicants' statements on motivation for medical school in particular, the possibility to distinguish the type of motivation and the differences between selected and non-selected applicants. A thematic analysis was conducted on written statements on motivation (n = 96), collected as a part of the selection procedure for the graduate entry program for medicine and research at our institution. Themes were identified as motivation-related and motivation-unrelated (additional). The motivation-related themes were further classified as autonomous and controlled types of motivation. Group percentages for each theme were compared between selected and non-selected applicants using Chi-square test and Fisher exact test. Applicants mainly described reasons belonging to autonomous type of motivation and fewer reasons belonging to controlled type of motivation. Additional themes in the statements included previous work experience and academic qualifications, ambitions, expectations and descriptions of the program and profession, personal qualities, and personal history. Applicants used strong words to support their stories. The selected and non-selected applicants did not differ in their types of motivation. Non-selected applicants provided more descriptions of personal history than selected applicants (p motivation does not appear to distinguish between applicants in selection for medical school. Both selected and non-selected applicants reported

  17. Incorporation of web-based applications and online resources in undergraduate medical education in the Irish Republic. Can new changes be incorporated in the current medical curriculum?

    Science.gov (United States)

    Dhatt, Karanvir Singh; Kaliaperumal, Chandrasekaran

    2014-07-01

    Significant change has been happening in the introduction of technology in medical teaching all over the world. We aim to determine if the undergraduate medical students and teachers are open to incorporating changes in the current medical curriculum or if there is a need for the same in the Republic of Ireland. A cross-sectional study involving 202 participants of whom 152 were medical students and 50 medical professionals (teachers and hospital doctors) were carried out involving three different medical universities namely; University College Cork (UCC), University College Dublin (UCD), and National University of Ireland in Galway (NUIG). Participants were requested to answer a series of 15 questions designed incorporating various fields of technology necessary for the study. The data was collected and analyzed using Statistical Package for Social Sciences (SPSS) software to determine statistical significance. The participants overall had a positive attitude toward the utility of modern technology and web-based applications in current medical curriculum. Ninety-one percent of the participants preferred the introduction of modern technology into medical education and 7% were against the idea and a further 2% of them remained undecided. There seems to be a "technology gap" in the current undergraduate medical curriculum in Ireland. A large-scale study involving more participants from all the medical schools in Ireland is recommended. We believe, changes can be brought into the current medical teaching and learning to make the process more fruitful and successful.

  18. Effectiveness, tolerability and practical application of the newer generation anti-obesity medications

    Directory of Open Access Journals (Sweden)

    Jeffrey S MacDaniels

    2016-03-01

    Full Text Available Objective: Comparison of the efficacy and tolerability of five newer anti-obesity medications to guide clinical decision making, examining bupropion–naltrexone combination, liraglutide, lorcaserin, orlistat, and phentermine–topiramate combination. Methods: A brief literature review and internet search for high-powered, randomized and placebo-controlled drug trials was conducted. Drug trial information was established for five currently approved anti-obesity medications. Secondarily, a statistical comparison of medications through Number Needed to Treat (NNT and Number Needed to Harm (NNH analyses were attempted as a way to provide a clinical analysis across these varied medications. Finally, a commentary about clinical application is issued for each agent accounting for typical side-effects, serious side-effects, mechanism of action and ease of use. Results: All five agents are currently approved oral medications to lower weight. The NNT range was 3–12, and NNH range was 4–17. The agent with the best NNT is phentermine–topiramate combination (NNT=3 and the agent with the best NNH is bupropion–naltrexone combination (NNH=17. Conclusion: When considering each patient’s clinical presentation, knowledge of each drug’s mechanism of action, side-effect profile, efficacy, and NNT and NNH values can help in selecting an anti-obesity medication to augment his or her weight loss efforts.

  19. Formation and Development of the Pre-Professional Training System of Foreign Medical Applicants in Ukraine (Historical and Educational Aspect)

    Science.gov (United States)

    Proskurkina, Iana

    2014-01-01

    The growing number of foreign applicants looking forward to getting education in Ukrainian medical universities makes us find the ways how to improve and make effective the pre-professional training system of foreign medical applicants for further education. The article deals with the issues of the history of formation and development of the…

  20. Low-dosage helical CT applications for chest medical checkup and lung cancer screening

    International Nuclear Information System (INIS)

    Wang Ping; Cui Fa; Liang Huanqing; Zheng Minfei

    2005-01-01

    Objective: A discussion on low-dosage helical CT applications on chest medical checkup and lung cancer screening. Methods: On the 100 chest medical check up with three different of protocols, including standard-dosage (the tube current was 230 mAs) were compared with low-dose (tube current was 50 mAs or 30 mAs). Results: Low-dosage helical CT scan provides excellent images. In 100 chest medical checkup, 39 nodules or masses were revealed, enlarged lymph node was noted in 1 case; emphysema or bullae was demonstrated in 3 segments; thickening of bronchial wall was shown in 2 cases; and localized pleural thickening was found in 1 case. Conclusion: In chest checkup or lung cancer screening low-dosage helical CT (tube current 30 mAs) will not only guarantee image quality but also reduce the radiation dose during the examination. (authors)

  1. [Current teaching, learning and examination methods in medical education and potential applications in rehabilitative issues].

    Science.gov (United States)

    Schwarzkopf, S R; Morfeld, M; Gülich, M; Lay, W; Horn, K; Mau, W

    2007-04-01

    With introduction of the new Federal Medical Licensing Regulations (Approbationsordnung) in Germany, integrated teaching in "Rehabilitation, Physical Medicine, Naturopathic Treatment" (Querschnittsbereich Q12) has become obligatory for the first time. Furthermore, the new Regulations require the medical faculties in Germany to realize an innovative didactic orientation in teaching. This paper provides an overview of recent applications of teaching techniques and examination methods in medical education with special consideration of the new integrated course Q12 and further teaching methods related to rehabilitative issues. Problem-oriented learning (POL), problem-based learning (PBL), bedside teaching, eLearning, and the examination methods Objective Structured Clinical Examination (OSCE) and Triple Jump are in the focus. This overview is intended as the basis for subsequent publications of the Commission for Undergraduate and Postgraduate Training of the German Society of Rehabilitation Science (DGRW), which will present examples of innovative teaching material.

  2. Calibration and application of medical particle accelerators to space radiation experiments

    International Nuclear Information System (INIS)

    Ryu, Kwangsun; Park, Miyoung; Chae, Jangsoo; Yoon, Sangpil; Shin, Dongho

    2012-01-01

    In this paper, we introduce radioisotope facilities and medical particle accelerators that can be applied to space radiation experiments and the experimental conditions required by the space radiation experiments. Space radiation experiments on the ground are critical in determining the lifetimes of satellites and in choosing or preparing the appropriate electrical parts to assure the designated mission lifetime. Before the completion of building the 100-MeV proton linear accelerator in Gyeongju, or even after the completion, the currently existing proton accelerators for medical purposes could suggest an alternative plan. We have performed experiments to calibrate medical proton beam accelerators to investigate whether the beam conditions are suitable for applications to space radiation experiments. Based on the calibration results, we propose reference beam operation conditions for space radiation experiments.

  3. Peculiarities of medical sociology: application of social theories in analyzing health and medicine.

    Science.gov (United States)

    Kaminskas, Raimundas; Darulis, Zilvinas

    2007-01-01

    To reveal the peculiarities of medical sociology introducing the application of social theories in analyzing public health and medicine. Comparative and descriptive analysis of scientific references found and current situation. During the last decade of the 20th century, the discussions about the sociology of health and medicine as separate discipline and its practical applications became more active. Main factors determined the growing importance of discipline were institutionalization of medicine and health care, changing patterns in doctor-patient relationships, different health perceptions, understanding of the influence of social factors on health, cardinal changes in the area of health technologies, consumeristic attitude towards health, appearance of market relationships within health care, and other global phenomena. In sociology, usual social theories such as structural functionalism, conflict, symbolic interaction, poststructuralism, feminist often attempt to explain the changes within health care. There is a relation of medical sociology and other types of sociology having common areas with medicine and health being analyzed in the article; social theories and their application in the field of health and medicine are being introduced attempting to explain the ongoing social changes in both Lithuania and the world. More and more attention in various areas of medical activities is being paid to the social aspects (both individual and society levels) of these activities, and there is a shift from applied sociology towards medical one. Despite the cessations of the development of medical sociology as separate branch of sciences, the researches of recent years are demonstrating obvious approaching modern research issues and methods, which do exist in contemporary world. Such tendencies show the prompt approaching of the academic community of Lithuania the general scientific standards which are dominating in the globalization-effected world.

  4. USSTRIDE program is associated with competitive Black and Latino student applicants to medical school

    Directory of Open Access Journals (Sweden)

    Kendall M. Campbell

    2014-05-01

    Full Text Available Purpose: We compared MCAT scores, grade point averages (GPAs, and medical school acceptance rates of Black and Latino students in an outreach program called Undergraduate Science Students Together Reaching Instructional Diversity and Excellence (USSTRIDE to non-USSTRIDE students. We hypothesized that Black and Latino participants in USSTRIDE had higher acceptance rates to medical school, higher MCAT scores, and college GPAs when compared to other Black and Latino medical school applicants from our institution. Methods: The academic performance (GPAs and MCAT scores and acceptance and matriculation rate data on all Black and Latino Florida State University applicants to any medical school from 2008 to 2012 were collected from the AIS/AMCAS database and separated into two comparison groups (USSTRIDE vs. Non-USSTRIDE. Independent sample T-tests and chi-square analysis, Cohen's D test, and odds ratios were determined. Results: Average science GPA was 3.47 for USSTRIDE students (n=55 and 3.45 for non-USSTRIDE students (n=137, p=0.68, d=0.0652. Average cumulative GPA was 3.57 for USSTRIDE students and 3.54 for non-USSTRIDE students (p=0.45, d=0.121. Average MCAT score was 23 for USSTRIDE students and 25 for non-USSTRIDE students (p=0.02, d=0.378. Twenty-three percent of accepted USSTRIDE students and 29% of accepted non-USSTRIDE students had multiple acceptances (p=0.483, OR 1.38, 95% CI 0.52–3.88. Forty-nine percent of non-USSTRIDE students and 75% of USSTRIDE students matriculated in medical school (p=0.001, OR 3.13 95% CI 1.51–6.74. About 78.6% of USSTRIDE students matriculated at FSU's medical school compared to 36.2% of non-USSTRIDE students (p<0.01. Conclusions: USSTRIDE and non-USSTRIDE students had similar science and cumulative GPAs. USSTRIDE students' MCAT scores were lower but acceptance rates to medical school were higher. Participation in USSTRIDE is associated with increased acceptance rates for Black and Latino students to our

  5. Early-career researchers in medical applications @ CERN | 6 June | Main Auditorium

    CERN Multimedia

    2016-01-01

      Discover how technological advances for high-energy physics have become essential tools for modern medicine. CERN seeks to answer fundamental questions about the Universe, and this mission naturally contributes to advancing the frontiers of technology. State-of-the-art techniques developed for particle accelerators, detectors, and physics computing have applications beyond the high-energy physics community in the medical field. These applications now have an essential role in clinical practices and medical research centres: from imaging devices, accelerator-technology dedicated to cancer therapy, to simulations and data science tools. This knowledge transfer from the high energy physics community to innovation in other fields is an inherent component of CERN’s mission and culture. It fuels scientific collaboration and technological advances, and drives innovation. In addition, it motivates future generations of scientists, and contributes to the public awareness of the impact of fu...

  6. Relative risk analysis in regulating the use of radiation-emitting medical devices. A preliminary application

    Energy Technology Data Exchange (ETDEWEB)

    Jones, E.D.; Banks, W.W.; Altenbach, T.J.; Fischer, L.E. [Lawrence Livermore National Lab., CA (United States)

    1995-09-01

    This report describes a preliminary application of an analysis approach for assessing relative risks in the use of radiation- emitting medical devices. Results are presented on human-initiated actions and failure modes that are most likely to occur in the use of the Gamma Knife, a gamma irradiation therapy device. This effort represents an initial step in a US Nuclear Regulatory Commission (NRC) plan to evaluate the potential role of risk analysis in regulating the use of nuclear medical devices. For this preliminary application of risk assessment, the focus was to develop a basic process using existing techniques for identifying the most likely risk contributors and their relative importance. The approach taken developed relative risk rankings and profiles that incorporated the type and quality of data available and could present results in an easily understood form. This work was performed by the Lawrence Livermore National Laboratory for the NRC.

  7. Image-based electronic patient records for secured collaborative medical applications.

    Science.gov (United States)

    Zhang, Jianguo; Sun, Jianyong; Yang, Yuanyuan; Liang, Chenwen; Yao, Yihong; Cai, Weihua; Jin, Jin; Zhang, Guozhen; Sun, Kun

    2005-01-01

    We developed a Web-based system to interactively display image-based electronic patient records (EPR) for secured intranet and Internet collaborative medical applications. The system consists of four major components: EPR DICOM gateway (EPR-GW), Image-based EPR repository server (EPR-Server), Web Server and EPR DICOM viewer (EPR-Viewer). In the EPR-GW and EPR-Viewer, the security modules of Digital Signature and Authentication are integrated to perform the security processing on the EPR data with integrity and authenticity. The privacy of EPR in data communication and exchanging is provided by SSL/TLS-based secure communication. This presentation gave a new approach to create and manage image-based EPR from actual patient records, and also presented a way to use Web technology and DICOM standard to build an open architecture for collaborative medical applications.

  8. Introduction to the simulation with MCNP Monte Carlo code and its applications in Medical Physics

    International Nuclear Information System (INIS)

    Parreno Z, F.; Paucar J, R.; Picon C, C.

    1998-01-01

    The simulation by Monte Carlo is tool which Medical Physics counts with it for the development of its research, the interest by this tool is growing, as we may observe in the main scientific journals for the years 1995-1997 where more than 27 % of the papers treat over Monte Carlo and/or its applications in the radiation transport.In the Peruvian Institute of Nuclear Energy we are implementing and making use of the MCNP4 and EGS4 codes. In this work are presented the general features of the Monte Carlo method and its more useful applications in Medical Physics. Likewise, it is made a simulation of the calculation of isodose curves in an interstitial treatment with Ir-192 wires in a mammary gland carcinoma. (Author)

  9. Summaries of research projects for fiscal years 1996 and 1997, medical applications and biophysical research

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-01

    The Medical Applications and Biophysical Research Division of the Office of Biological and Environmental Research supports and manages research in several distinct areas of science and technology. The projects described in this book are grouped by the main budgetary areas: General Life Sciences (structural molecular biology), Medical Applications (primarily nuclear medicine) and Measurement Science (analytical chemistry instrumentation), Environmental Management Science Program, and the Small Business Innovation Research Program. The research funded by this division complements that of the other two divisions in the Office of Biological and Environmental Research (OBER): Health Effects and Life Sciences Research, and Environmental Sciences. Most of the OBER programs are planned and administered jointly by the staff of two or all three of the divisions. This summary book provides information on research supported in these program areas during Fiscal Years 1996 and 1997.

  10. Relative risk analysis in regulating the use of radiation-emitting medical devices. A preliminary application

    International Nuclear Information System (INIS)

    Jones, E.D.; Banks, W.W.; Altenbach, T.J.; Fischer, L.E.

    1995-09-01

    This report describes a preliminary application of an analysis approach for assessing relative risks in the use of radiation- emitting medical devices. Results are presented on human-initiated actions and failure modes that are most likely to occur in the use of the Gamma Knife, a gamma irradiation therapy device. This effort represents an initial step in a US Nuclear Regulatory Commission (NRC) plan to evaluate the potential role of risk analysis in regulating the use of nuclear medical devices. For this preliminary application of risk assessment, the focus was to develop a basic process using existing techniques for identifying the most likely risk contributors and their relative importance. The approach taken developed relative risk rankings and profiles that incorporated the type and quality of data available and could present results in an easily understood form. This work was performed by the Lawrence Livermore National Laboratory for the NRC

  11. Simulation training for medical emergencies in the dental setting using an inexpensive software application.

    Science.gov (United States)

    Kishimoto, N; Mukai, N; Honda, Y; Hirata, Y; Tanaka, M; Momota, Y

    2017-11-09

    Every dental provider needs to be educated about medical emergencies to provide safe dental care. Simulation training is available with simulators such as advanced life support manikins and robot patients. However, the purchase and development costs of these simulators are high. We have developed a simulation training course on medical emergencies using an inexpensive software application. The purpose of this study was to evaluate the educational effectiveness of this course. Fifty-one dental providers participated in this study from December 2014 to March 2015. Medical simulation software was used to simulate a patient's vital signs. We evaluated participants' ability to diagnose and treat vasovagal syncope or anaphylaxis with an evaluation sheet and conducted a questionnaire before and after the scenario-based simulation training. The median evaluation sheet score for vasovagal syncope increased significantly from 7/9 before to 9/9 after simulation training. The median score for anaphylaxis also increased significantly from 8/12 to 12/12 (P simulation training. This simulation course improved participants' ability to diagnose and treat medical emergencies and improved their confidence. This course can be offered inexpensively using a software application. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  12. E-SAP: efficient-strong authentication protocol for healthcare applications using wireless medical sensor networks.

    Science.gov (United States)

    Kumar, Pardeep; Lee, Sang-Gon; Lee, Hoon-Jae

    2012-01-01

    A wireless medical sensor network (WMSN) can sense humans' physiological signs without sacrificing patient comfort and transmit patient vital signs to health professionals' hand-held devices. The patient physiological data are highly sensitive and WMSNs are extremely vulnerable to many attacks. Therefore, it must be ensured that patients' medical signs are not exposed to unauthorized users. Consequently, strong user authentication is the main concern for the success and large scale deployment of WMSNs. In this regard, this paper presents an efficient, strong authentication protocol, named E-SAP, for healthcare application using WMSNs. The proposed E-SAP includes: (1) a two-factor (i.e., password and smartcard) professional authentication; (2) mutual authentication between the professional and the medical sensor; (3) symmetric encryption/decryption for providing message confidentiality; (4) establishment of a secure session key at the end of authentication; and (5) professionals can change their password. Further, the proposed protocol requires three message exchanges between the professional, medical sensor node and gateway node, and achieves efficiency (i.e., low computation and communication cost). Through the formal analysis, security analysis and performance analysis, we demonstrate that E-SAP is more secure against many practical attacks, and allows a tradeoff between the security and the performance cost for healthcare application using WMSNs.

  13. E-SAP: Efficient-Strong Authentication Protocol for Healthcare Applications Using Wireless Medical Sensor Networks

    Directory of Open Access Journals (Sweden)

    Hoon-Jae Lee

    2012-02-01

    Full Text Available A wireless medical sensor network (WMSN can sense humans’ physiological signs without sacrificing patient comfort and transmit patient vital signs to health professionals’ hand-held devices. The patient physiological data are highly sensitive and WMSNs are extremely vulnerable to many attacks. Therefore, it must be ensured that patients’ medical signs are not exposed to unauthorized users. Consequently, strong user authentication is the main concern for the success and large scale deployment of WMSNs. In this regard, this paper presents an efficient, strong authentication protocol, named E-SAP, for healthcare application using WMSNs. The proposed E-SAP includes: (1 a two-factor (i.e., password and smartcard professional authentication; (2 mutual authentication between the professional and the medical sensor; (3 symmetric encryption/decryption for providing message confidentiality; (4 establishment of a secure session key at the end of authentication; and (5 professionals can change their password. Further, the proposed protocol requires three message exchanges between the professional, medical sensor node and gateway node, and achieves efficiency (i.e., low computation and communication cost. Through the formal analysis, security analysis and performance analysis, we demonstrate that E-SAP is more secure against many practical attacks, and allows a tradeoff between the security and the performance cost for healthcare application using WMSNs.

  14. Unusual events in the use of radioactive material at medical applications

    International Nuclear Information System (INIS)

    Czarwinski, R.

    2002-01-01

    In the Federal Republic of Germany unusual events in the use of radioactive materials and in the operation of accelerators outside the nuclear sector are evaluated centrally and published annually. At that evaluation it can be distinguished between the medical and non-medical application of ionising radiation. Around 3000 user of radioactive materials are registered in medicine including research and teaching. That means approximately 25% of all users in Germany. Firstly an overview on the number of unusual events in the last ten years is given for medical applications like afterloading, gamma irradiation, nuclear medicine, radiation sources and accelerators. The analysis of the incidents in the considered medical areas resulted in two categories-human error and technical break down. The main causes for the incidents which could be analysed are presented in the paper. Additionally the radiation exposures resulting from the incidents are considered. The analysis of these unusual events enables in dependence of the known information lessons learned to avoid similar errors. This feedback will be offered. (Author)

  15. The Application of Use Case Modeling in Designing Medical Imaging Information Systems

    International Nuclear Information System (INIS)

    Safdari, Reza; Farzi, Jebraeil; Ghazisaeidi, Marjan; Mirzaee, Mahboobeh; Goodini, Azadeh

    2013-01-01

    Introduction. The essay at hand is aimed at examining the application of use case modeling in analyzing and designing information systems to support Medical Imaging services. Methods. The application of use case modeling in analyzing and designing health information systems was examined using electronic databases (Pubmed, Google scholar) resources and the characteristics of the modeling system and its effect on the development and design of the health information systems were analyzed. Results. Analyzing the subject indicated that Provident modeling of health information systems should provide for quick access to many health data resources in a way that patients' data can be used in order to expand distant services and comprehensive Medical Imaging advices. Also these experiences show that progress in the infrastructure development stages through gradual and repeated evolution process of user requirements is stronger and this can lead to a decline in the cycle of requirements engineering process in the design of Medical Imaging information systems. Conclusion. Use case modeling approach can be effective in directing the problems of health and Medical Imaging information systems towards understanding, focusing on the start and analysis, better planning, repetition, and control

  16. IEEE NSS 2008 Short Course: How to use the Grid for Physics and Medical Applications

    CERN Document Server

    Moscicki, J T; Lechner, A

    2008-01-01

    This course is intended to introduce the Grid technology to scientists and engineers with no experience in this field. Participants will gain practical skills on how to quickly make use of distributed computing resources for their applications. The class begins will an introduction to the Grid technology and an overview of existing Grid applications. A case study will show the details of a real medical Geant 4 simulation running on the Grid. Hands-on exercises will give practical experience with using the application oriented tools such as Ganga (http://cern.ch/ganga) and DIANE (http://cern.ch/diane) to support solving scientific problems. The participants will have an opportunity to get involved into using the Grid beyond the scope of the course and get further support for their applications.

  17. Summary Report of Consultants' Meeting on Auger Electron Emission Data Needs for Medical Applications

    International Nuclear Information System (INIS)

    Noy, Roberto Capote; Chung, Hyun Kyung; Bartschat, Klaus; Dong, Chenzhong; Jonsson, Per; Kibedi, Tibor; Kondev, Filip G.; Nikjoo, Hooshang; Palffy, Adriana

    2013-11-01

    A summary is given of a Consultants' Meeting on 'Auger Electron Emission Data Needs for Medical Applications'. Participants assessed and reviewed detailed atomic and nuclear data needs for a number of Auger emitters deemed as potentially suitable for applications in nuclear medicine and radiotherapy. Technical discussions are described in this report, along with recommendations for future work, along with recommendations for future work. Presentations by the consultants at the meeting are available at http://www-nds.iaea.org/index-meeting-crp/CM-Auger-2013/. (author)

  18. A qualitative analysis of statements on motivation of applicants for medical school

    OpenAIRE

    Wouters, Anouk; Bakker, Anneke H; van Wijk, Inge J; Croiset, Gerda; Kusurkar, Rashmi A

    2014-01-01

    Background Selection committees try to ascertain that motivated students are selected for medical school. Self-determination theory stresses that the type of motivation is more important than the quantity of motivation. Autonomous motivation, compared to controlled motivation, in students leads to better learning outcomes. Applicants can express their motivation in written statements, a selection tool which has been found to elicit heterogeneous responses, hampering the comparison of applican...

  19. A collaborative institutional model for integrating computer applications in the medical curriculum.

    OpenAIRE

    Friedman, C. P.; Oxford, G. S.; Juliano, E. L.

    1991-01-01

    The introduction and promotion of information technology in an established medical curriculum with existing academic and technical support structures poses a number of challenges. The UNC School of Medicine has developed the Taskforce on Educational Applications in Medicine (TEAM), to coordinate this effort. TEAM works as a confederation of existing research and support units with interests in computers and education, along with a core of interested faculty with curricular responsibilities. C...

  20. European union legislation in medical application of ionizing radiation and radiation protection

    International Nuclear Information System (INIS)

    Vanlic-Razumenic, N.; Pavlovic, R.; Plecas, I.

    1999-01-01

    The most important aspects of the latest EU legislation concerning medical application of ionizing radiation, with the special emphasis on nuclear medicine are presented in this paper. The EU member countries will start to apply this regulation on 13 th May 2000. Our legislation is already adjusted to IAEA standards and ICRP Recommendation. Those regulations are of special concerns in the Radioisotope Laboratory of The Vinca Institute of Nuclear Sciences. (author)

  1. An approach for access differentiation design in medical distributed applications built on databases.

    Science.gov (United States)

    Shoukourian, S K; Vasilyan, A M; Avagyan, A A; Shukurian, A K

    1999-01-01

    A formalized "top to bottom" design approach was described in [1] for distributed applications built on databases, which were considered as a medium between virtual and real user environments for a specific medical application. Merging different components within a unified distributed application posits new essential problems for software. Particularly protection tools, which are sufficient separately, become deficient during the integration due to specific additional links and relationships not considered formerly. E.g., it is impossible to protect a shared object in the virtual operating room using only DBMS protection tools, if the object is stored as a record in DB tables. The solution of the problem should be found only within the more general application framework. Appropriate tools are absent or unavailable. The present paper suggests a detailed outline of a design and testing toolset for access differentiation systems (ADS) in distributed medical applications which use databases. The appropriate formal model as well as tools for its mapping to a DMBS are suggested. Remote users connected via global networks are considered too.

  2. Nanodiamonds for Medical Applications: Interaction with Blood in Vitro and in Vivo.

    Science.gov (United States)

    Tsai, Lin-Wei; Lin, Yu-Chung; Perevedentseva, Elena; Lugovtsov, Andrei; Priezzhev, Alexander; Cheng, Chia-Liang

    2016-07-12

    Nanodiamonds (ND) have emerged to be a widely-discussed nanomaterial for their applications in biological studies and for medical diagnostics and treatment. The potentials have been successfully demonstrated in cellular and tissue models in vitro. For medical applications, further in vivo studies on various applications become important. One of the most challenging possibilities of ND biomedical application is controllable drug delivery and tracing. That usually assumes ND interaction with the blood system. In this work, we study ND interaction with rat blood and analyze how the ND surface modification and coating can optimize the ND interaction with the blood. It was found that adsorption of a low concentration of ND does not affect the oxygenation state of red blood cells (RBC). The obtained in vivo results are compared to the results of in vitro studies of nanodiamond interaction with rat and human blood and blood components, such as red blood cells and blood plasma. An in vivo animal model shows ND injected in blood attach to the RBC membrane and circulate with blood for more than 30 min; and ND do not stimulate an immune response by measurement of proinflammatory cytokine TNF-α with ND injected into mice via the caudal vein. The results further confirm nanodiamonds' safety in organisms, as well as the possibility of their application without complicating the blood's physiological conditions.

  3. Nanodiamonds for Medical Applications: Interaction with Blood in Vitro and in Vivo

    Directory of Open Access Journals (Sweden)

    Lin-Wei Tsai

    2016-07-01

    Full Text Available Nanodiamonds (ND have emerged to be a widely-discussed nanomaterial for their applications in biological studies and for medical diagnostics and treatment. The potentials have been successfully demonstrated in cellular and tissue models in vitro. For medical applications, further in vivo studies on various applications become important. One of the most challenging possibilities of ND biomedical application is controllable drug delivery and tracing. That usually assumes ND interaction with the blood system. In this work, we study ND interaction with rat blood and analyze how the ND surface modification and coating can optimize the ND interaction with the blood. It was found that adsorption of a low concentration of ND does not affect the oxygenation state of red blood cells (RBC. The obtained in vivo results are compared to the results of in vitro studies of nanodiamond interaction with rat and human blood and blood components, such as red blood cells and blood plasma. An in vivo animal model shows ND injected in blood attach to the RBC membrane and circulate with blood for more than 30 min; and ND do not stimulate an immune response by measurement of proinflammatory cytokine TNF-α with ND injected into mice via the caudal vein. The results further confirm nanodiamonds’ safety in organisms, as well as the possibility of their application without complicating the blood’s physiological conditions.

  4. THz waves: biological effects, industrial and medical; Les ondes THz: effets biologiques, applications industrielles et medicales

    Energy Technology Data Exchange (ETDEWEB)

    Coutaz, J.L.; Garet, F. [Universite de Savoie au Bourget du Lac, IMEP-LAHC, UMR CNRS 5130, 73 (France); Le Drean, Y.; Zhadobov, M. [Institut d' Electronique et des Telecommunications de Rennes, 35 (France); Veyret, B. [I.M.S., 33 - Pessac (France); Mounaix, P. [Laboratoire Ondes et Matiere d' Aquitaine, Universite de Bordeaux, 1 UMR 5798, 33 - Talence (France); Caumes, J.P. [ALPhANOV, 33 - Bordeaux (France); Gallot, G. [Ecole Polytechnique, Laboratoire d' Optique et Biosciences, CNRS UMR 7645, INSERM U696, 91 - Palaiseau (France); Gian Piero, Gallerano [ENEA, Frascati (Italy); Mouret, G. [Universite du Littoral Cote d' Opale - ULCO, 59 - Dunkerque (France); Guilpin, J.C. [Direction Generale de l' Aviation Civile, 94 - Bonneuil sur Marne (France)

    2011-07-01

    Following the debates about body scanners installed in airports for passengers security control, the non-ionizing radiations (NIR) section of the French radiation protection society (SFR) has organized a conference day to take stock of the present day knowledge about the physical aspects and the biological effects of this frequency range as well as about their medical, and industrial applications (both civil and military). This document gathers the slides of the available presentations: 1 - introduction and general considerations about THz waves, the THz physical phenomenon among NIR (J.L. Coutaz); 2 - interaction of millimeter waves with living material: from dosimetry to biological impacts (Y. Le Drean and M. Zhadobov); 3 - Tera-Hertz: standards and recommendations (B. Veyret); 4 - THz spectro-imaging technique: status and perspectives (P. Mounaix); 5 - THz technology: seeing the invisible? (J.P. Caumes); 6 - Tera-Hertz: biological and medical applications (G. Gallot); 7 - Biological applications of THz radiation: a review of events and a glance to the future (G.P. Gallerano); 8 - Industrial and military applications - liquids and solids detection in the THz domain (F. Garet); 9 - THz radiation and its civil and military applications - gas detection and quantifying (G. Mouret); 10 - Body scanners and civil aviation security (J.C. Guilpin, presentation not available). (J.S.)

  5. MO-A-9A-01: Innovation in Medical Physics Practice: 3D Printing Applications

    Energy Technology Data Exchange (ETDEWEB)

    Ehler, E [University of Minnesota, Minneapolis, MN (United States); Perks, J [UC Davis Medical Center, Sacramento, CA (United States); Rasmussen, K [East Carolina University, Greenville, NC (United States); Bakic, P [University of Pennsylvania, Philadelphia, PA (United States)

    2014-06-15

    3D printing, also called additive manufacturing, has great potential to advance the field of medicine. Many medical uses have been exhibited from facial reconstruction to the repair of pulmonary obstructions. The strength of 3D printing is to quickly convert a 3D computer model into a physical object. Medical use of 3D models is already ubiquitous with technologies such as computed tomography and magnetic resonance imaging. Thus tailoring 3D printing technology to medical functions has the potential to impact patient care. This session will discuss applications to the field of Medical Physics. Topics discussed will include introduction to 3D printing methods as well as examples of real-world uses of 3D printing spanning clinical and research practice in diagnostic imaging and radiation therapy. The session will also compare 3D printing to other manufacturing processes and discuss a variety of uses of 3D printing technology outside the field of Medical Physics. Learning Objectives: Understand the technologies available for 3D Printing Understand methods to generate 3D models Identify the benefits and drawbacks to rapid prototyping / 3D Printing Understand the potential issues related to clinical use of 3D Printing.

  6. MO-A-9A-01: Innovation in Medical Physics Practice: 3D Printing Applications

    International Nuclear Information System (INIS)

    Ehler, E; Perks, J; Rasmussen, K; Bakic, P

    2014-01-01

    3D printing, also called additive manufacturing, has great potential to advance the field of medicine. Many medical uses have been exhibited from facial reconstruction to the repair of pulmonary obstructions. The strength of 3D printing is to quickly convert a 3D computer model into a physical object. Medical use of 3D models is already ubiquitous with technologies such as computed tomography and magnetic resonance imaging. Thus tailoring 3D printing technology to medical functions has the potential to impact patient care. This session will discuss applications to the field of Medical Physics. Topics discussed will include introduction to 3D printing methods as well as examples of real-world uses of 3D printing spanning clinical and research practice in diagnostic imaging and radiation therapy. The session will also compare 3D printing to other manufacturing processes and discuss a variety of uses of 3D printing technology outside the field of Medical Physics. Learning Objectives: Understand the technologies available for 3D Printing Understand methods to generate 3D models Identify the benefits and drawbacks to rapid prototyping / 3D Printing Understand the potential issues related to clinical use of 3D Printing

  7. Examining the application of Web 2.0 in medical-related organisations.

    Science.gov (United States)

    Chu, Samuel Kai Wah; Woo, Matsuko; King, Ronnel B; Choi, Stephen; Cheng, Miffy; Koo, Peggy

    2012-03-01

    This study surveyed Web 2.0 application in three types of selected health or medical-related organisations such as university medical libraries, hospitals and non-profit medical-related organisations. Thirty organisations participated in an online survey on the perceived purposes, benefits and difficulties in using Web 2.0. A phone interview was further conducted with eight organisations (26.7%) to collect information on the use of Web 2.0. Data were analysed using both quantitative and qualitative approaches. Results showed that knowledge and information sharing and the provision of a better communication platform were rated as the main purposes of using Web 2.0. Time constraints and low staff engagement were the most highly rated difficulties. In addition, most participants found Web 2.0 to be beneficial to their organisations. Medical-related organisations that adopted Web 2.0 technologies have found them useful, with benefits outweighing the difficulties in the long run. The implications of this study are discussed to help medical-related organisations make decisions regarding the use of Web 2.0 technologies. © 2011 The authors. Health Information and Libraries Journal © 2011 Health Libraries Group.

  8. Health professionals as mobile content creators: teaching medical students to develop mHealth applications.

    Science.gov (United States)

    Masters, Ken

    2014-10-01

    Patient access to health information and patient-provider communication is integral to medicine, and can be facilitated by mobile applications ("apps"). Traditionally, student training in mobile Health (mHealth) has focussed on health professionals as consumers of information, with negative impacts on the quality and value of medical apps. This study focuses on teaching medical students to develop their own medical apps. At Sultan Qaboos University, Oman, an app development environment, iBuildApp, was taught to medical students and used to develop their first apps. Students were surveyed on their perceptions of the project. Of the 166 students, 107 (64.5%) completed the survey. There was an increase in the perceived need for such learning, apps were aimed primarily at patients, and previous programming experience was the strongest influencer of a positive experience. A majority (77.6%) wanted more sophisticated development environments in spite of their apparent struggles. The impact of previous experience is similar to other studies; the perceived value and focus on patient apps is indicative of an awareness of patients' use of the devices not reflected in all literature. It is possible to teach medical students the fundamentals of app design so that they may contribute to app development in the future.

  9. Admission Control Over Internet of Vehicles Attached With Medical Sensors for Ubiquitous Healthcare Applications.

    Science.gov (United States)

    Lin, Di; Labeau, Fabrice; Yao, Yuanzhe; Vasilakos, Athanasios V; Tang, Yu

    2016-07-01

    Wireless technologies and vehicle-mounted or wearable medical sensors are pervasive to support ubiquitous healthcare applications. However, a critical issue of using wireless communications under a healthcare scenario rests at the electromagnetic interference (EMI) caused by radio frequency transmission. A high level of EMI may lead to a critical malfunction of medical sensors, and in such a scenario, a few users who are not transmitting emergency data could be required to reduce their transmit power or even temporarily disconnect from the network in order to guarantee the normal operation of medical sensors as well as the transmission of emergency data. In this paper, we propose a joint power and admission control algorithm to schedule the users' transmission of medical data. The objective of this algorithm is to minimize the number of users who are forced to disconnect from the network while keeping the EMI on medical sensors at an acceptable level. We show that a fixed point of proposed algorithm always exists, and at the fixed point, our proposed algorithm can minimize the number of low-priority users who are required to disconnect from the network. Numerical results illustrate that the proposed algorithm can achieve robust performance against the variations of mobile hospital environments.

  10. Application of a latent variables model for the medical images analysis

    International Nuclear Information System (INIS)

    Campos S, Y.; Ruiz C, S.

    2008-01-01

    In recent years the technological advance has allowed the significant advance in diverse research fields, the medicine has not been exempt of this technology and the use of this technology has allowed a significant advance in the equipment that are used to obtain medical images. The quantity of information that is generated with this equipment has grown in exponential form and it is a difficult task to carry out a quantitative analysis of the data also the manipulation of big quantities of information makes the medical images analysis a complicated task. It is in fact this complexity what motivates this work where one of the main objectives is the analysis of techniques that allow to work with the complexity of the data generated with medical equipment. Likewise, it is wanted to illustrate an application of the peaceful uses of the nuclear energy to treat a medical problem where the diagnostic it depends essentially on the current medical equipment to give an appropriate treatment to the patients. (Author)

  11. 42. Science week: Laser Science and applications, Aleppo (SY), 2-4 Nov 2002, Book two: Laser science and medical laser applications

    International Nuclear Information System (INIS)

    2005-01-01

    This publication includes the papers presented at the 42nd science week of the Supreme Council of Sciences, held in Aleppo (Syria) from 2-4 November 2002. This proceedings is published in three books covering laser science and applications and in particular on material studies and medical uses. Part two covers medical applications, Part three on applications of laser in material sciences, while Part one is for contents and the proceedings program

  12. Polysaccharide-Based Materials Associated with or Coordinated to Gold Nanoparticles: Synthesis and Medical Application.

    Science.gov (United States)

    Facchi, Débora P; da Cruz, Joziel A; Bonafé, Elton G; Pereira, Antonio G B; Fajardo, André R; Venter, Sandro A S; Monteiro, Johny P; Muniz, Edvani C; Martins, Alessandro F

    2017-01-01

    Gold nanoparticles (AuNPs) have enormous potential for application in imaging, diagnosis, and therapies in the medical field. AuNPs are renowned for their localized surface plasmon resonance (LSPR) properties, large surface area, and biocompatibility with body fluids. Further, AuNPs have featured prominently in new methodologies for cancer treatments, like photothermal and imaging therapies. Although AuNPs present enormous potential for application in the medical field, their instability under physiological conditions prevents further uses. However, this limitation may be overcome by associating AuNPs with biopolymers. To the best of our knowledge, a revision paper rationalizing the structure/property relationship and applications of AuNPspolysaccharide composites in the medical field has not been published yet. This manuscript discusses the most relevant aspects and state-of-art concepts surrounding the synthesis of AuNPs based on green chemistry and their association with polysaccharides that can efficiently function both as stabilizing and reducing agents of Au nanoparticles. Even more, polysaccharide devices may inhibit non-specific interactions between AuNPs and biological macromolecules, suppressing unsuitable "protein corona" formations on AuNP surfaces, thereby increasing the potential of AuNP composites of being employing as drug delivery matrices and wound-healing devices as well as in photothermal/ imaging purposes for cancer treatments and biosensors. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  13. MCNP6 simulation of reactions of interest to FRIB, medical, and space applications

    International Nuclear Information System (INIS)

    Mashnik, Stepan G.

    2015-01-01

    The latest production-version of the Los Alamos Monte Carlo N-Particle transport code MCNP6 has been used to simulate a variety of particle-nucleus and nucleus-nucleus reactions of academic and applied interest to research subjects at the Facility for Rare Isotope Beams (FRIB), medical isotope production, space-radiation shielding, cosmic-ray propagation, and accelerator applications, including several reactions induced by radioactive isotopes, analyzing production of both stable and radioactive residual nuclei. Here, we discuss examples of validation and verification of MCNP6 by comparing with recent neutron spectra measured at the Heavy Ion Medical Accelerator in Chiba, Japan; spectra of light fragments from several reactions measured recently at GANIL, France; INFN Laboratori Nazionali del Sud, Catania, Italy; COSY of the Jülich Research Center, Germany; and cross sections of products from several reactions measured lately at GSI, Darmstadt, Germany; ITEP, Moscow, Russia; and, LANSCE, LANL, Los Alamos, U.S.A. As a rule, MCNP6 provides quite good predictions for most of the reactions we analyzed so far, allowing us to conclude that it can be used as a reliable and useful simulation tool for various applications for FRIB, medical, and space applications involving stable and radioactive isotopes. (author)

  14. Application countermeasures of non-incineration technologies for medical waste treatment in China.

    Science.gov (United States)

    Chen, Yang; Ding, Qiong; Yang, Xiaoling; Peng, Zhengyou; Xu, Diandou; Feng, Qinzhong

    2013-12-01

    By the end of 2012, there were 272 modern, high-standard, centralized medical waste disposal facilities operating in various cities in China. Among these facilities nearly 50% are non-incineration treatment facilities, including the technologies of high temperature steam, chemical disinfection and microwave. Each of the non-incineration technologies has its advantages and disadvantages, and any single technology cannot offer a panacea because of the complexity of medical waste disposal. Although non-incineration treatment of medical waste can avoid the release of polychlorinated dibenzo-p-dioxins/dibenzofurans, it is still necessary to decide how to best meet the local waste management needs while minimizing the impact on the environment and public health. There is still a long way to go to establish the sustainable application and management mode of non-incineration technologies. Based on the analysis of typical non-incineration process, pollutant release, and the current tendency for technology application and development at home and abroad, this article recommends the application countermeasures of non-incineration technologies as the best available techniques and best environmental practices in China.

  15. An Overview of Mechanical Properties and Material Modeling of Polylactide (PLA) for Medical Applications.

    Science.gov (United States)

    Bergström, Jörgen S; Hayman, Danika

    2016-02-01

    This article provides an overview of the connection between the microstructural state and the mechanical response of various bioresorbable polylactide (PLA) devices for medical applications. PLLA is currently the most commonly used material for bioresorbable stents and sutures, and its use is increasing in many other medical applications. The non-linear mechanical response of PLLA, due in part to its low glass transition temperature (T g ≈ 60 °C), is highly sensitive to the molecular weight and molecular orientation field, the degree of crystallinity, and the physical aging time. These microstructural parameters can be tailored for specific applications using different resin formulations and processing conditions. The stress-strain, deformation, and degradation response of a bioresorbable medical device is also strongly dependent on the time history of applied loads and boundary conditions. All of these factors can be incorporated into a suitable constitutive model that captures the multiple physics that are involved in the device response. Currently developed constitutive models already provide powerful computations simulation tools, and more progress in this area is expected to occur in the coming years.

  16. 医疗移动应用程序评价%Evaluation on medical mobile applications

    Institute of Scientific and Technical Information of China (English)

    李骁; 方振威; 林阳

    2015-01-01

    目的:评价市场上主流医疗移动应用程序的功能,分析其易用性及可能存在的问题。方法检索中国区ITunes Store和Google Play Store,将纳入的移动应用程序按功能进行分析。结果共纳入6款移动应用程序,其中3款为集成功能类(用药助手,用药参考,集博),3款为单一功能类(临床指南,医学计算公式,检验助手)。功能包含药品信息、医学计算、药物相互作用、临床用药指南、药品资讯、患者指导及化验值标准范围。单一功能类应用程序在数据信息的数量、文献资料的广度及内容的深度上优于集成功能类。集成功能类应用程序中,用药助手具备全面的药物信息解读;用药参考可定制本院处方集,使处方信息个性化,并提供快捷的药物审查;集博从药品说明书的角度出发,突出其法律地位。结论医疗移动程序功能全面、使用便捷,可以为医务工作者提供一定的参考;但各软件数据来源各异,缺乏统一的标准,其权威性和准确性尚需进一步验证。%Objective To evaluate the functions of medical mobile applications in market, and analyze the availability and potential pro-blems, and to provide reference for medical practitioners.Methods The search for medical applications was conducted in China region of iTunes Store and Google Play Store, and the eligible applications were analyzed in the light of their functions.Results Six medical applications were concluded after screening in terms of the criteria of inclusion and exclusion, in which three of them belong to the category of integrated functions and the rest single function.Functions of the medical applica-tions involved at least one of the following elements:medicine informa-tion, medicine calculation, medicine interactions, clinical guide, medi-cine advertisement, patient′s guidance and standard range of laboratory values.Applications with single

  17. Medical decision support and medical informatics education: roots, methods and applications in czechoslovakia and the czech republic.

    Science.gov (United States)

    Zvárová, Jana

    2013-01-01

    The paper describes the history of medical informatics in Czechoslovakia and the Czech Republic. It focuses on the topics of medical informatics education and decision support methods and systems. Several conferences held in Czechoslovakia and in the Czech Republic organized in cooperation with IMIA or EFMI are described. Support of European Union and Czech agencies in several European and national projects focused on medical informatics topics highly contributed to medical informatics development in Czechoslovakia and the Czech Republic and to the establishment of the European Center for Medical Informatics, Statistics and Epidemiology as the joint workplace of Charles University in Prague and Academy of Sciences of the Czech Republic in 1994.

  18. A Review on the 3D Printing of Functional Structures for Medical Phantoms and Regenerated Tissue and Organ Applications

    Directory of Open Access Journals (Sweden)

    Kan Wang

    2017-10-01

    Full Text Available Medical models, or “phantoms,” have been widely used for medical training and for doctor-patient interactions. They are increasingly used for surgical planning, medical computational models, algorithm verification and validation, and medical devices development. Such new applications demand high-fidelity, patient-specific, tissue-mimicking medical phantoms that can not only closely emulate the geometric structures of human organs, but also possess the properties and functions of the organ structure. With the rapid advancement of three-dimensional (3D printing and 3D bioprinting technologies, many researchers have explored the use of these additive manufacturing techniques to fabricate functional medical phantoms for various applications. This paper reviews the applications of these 3D printing and 3D bioprinting technologies for the fabrication of functional medical phantoms and bio-structures. This review specifically discusses the state of the art along with new developments and trends in 3D printed functional medical phantoms (i.e., tissue-mimicking medical phantoms, radiologically relevant medical phantoms, and physiological medical phantoms and 3D bio-printed structures (i.e., hybrid scaffolding materials, convertible scaffolds, and integrated sensors for regenerated tissues and organs.

  19. USSTRIDE program is associated with competitive Black and Latino student applicants to medical school.

    Science.gov (United States)

    Campbell, Kendall M; Berne-Anderson, Thesla; Wang, Aihua; Dormeus, Guy; Rodríguez, José E

    2014-01-01

    We compared MCAT scores, grade point averages (GPAs), and medical school acceptance rates of Black and Latino students in an outreach program called Undergraduate Science Students Together Reaching Instructional Diversity and Excellence (USSTRIDE) to non-USSTRIDE students. We hypothesized that Black and Latino participants in USSTRIDE had higher acceptance rates to medical school, higher MCAT scores, and college GPAs when compared to other Black and Latino medical school applicants from our institution. The academic performance (GPAs and MCAT scores) and acceptance and matriculation rate data on all Black and Latino Florida State University applicants to any medical school from 2008 to 2012 were collected from the AIS/AMCAS database and separated into two comparison groups (USSTRIDE vs. Non-USSTRIDE). Independent sample T-tests and chi-square analysis, Cohen's D test, and odds ratios were determined. Average science GPA was 3.47 for USSTRIDE students (n=55) and 3.45 for non-USSTRIDE students (n=137, p=0.68, d=0.0652). Average cumulative GPA was 3.57 for USSTRIDE students and 3.54 for non-USSTRIDE students (p=0.45, d=0.121). Average MCAT score was 23 for USSTRIDE students and 25 for non-USSTRIDE students (p=0.02, d=0.378). Twenty-three percent of accepted USSTRIDE students and 29% of accepted non-USSTRIDE students had multiple acceptances (p=0.483, OR 1.38, 95% CI 0.52-3.88). Forty-nine percent of non-USSTRIDE students and 75% of USSTRIDE students matriculated in medical school (p=0.001, OR 3.13 95% CI 1.51-6.74). About 78.6% of USSTRIDE students matriculated at FSU's medical school compared to 36.2% of non-USSTRIDE students (pLatino students to our medical school. This finding is true for other medical schools as USSTRIDE students are as likely as non-USSTRIDE students to have multiple acceptances.

  20. Smart sensors and systems innovations for medical, environmental, and IoT applications

    CERN Document Server

    Yasuura, Hiroto; Liu, Yongpan; Lin, Youn-Long

    2017-01-01

    This book describes the technology used for effective sensing of our physical world and intelligent processing techniques for sensed information, which are essential to the success of Internet of Things (IoT). The authors provide a multidisciplinary view of sensor technology from materials, process, circuits, and big data domains and showcase smart sensor systems in real applications including smart home, transportation, medical, environmental, agricultural, etc. Unlike earlier books on sensors, this book provides a “global” view on smart sensors covering abstraction levels from device, circuit, systems, and algorithms. Profiles active research on smart sensors based on CMOS microelectronics; Describes applications of sensors and sensor systems in cyber physical systems, the social information infrastructure in our modern world; Includes coverage of a variety of related information technologies supporting the application of sensors; Discusses the integration of computation, networking, actuation, database...

  1. Metal nanoparticles (other than gold or silver) prepared using plant extracts for medical applications

    Science.gov (United States)

    Pasca, Roxana-Diana; Santa, Szabolcs; Racz, Levente Zsolt; Racz, Csaba Pal

    2016-12-01

    There are many modalities to prepare metal nanoparticles, but the reducing of the metal ions with plant extracts is one of the most promising because it is considerate less toxic for the environment, suitable for the use of those nanoparticles in vivo and not very expensive. Various metal ions have been already studied such as: cobalt, copper, iron, platinum, palladium, zinc, indium, manganese and mercury and the number of plant extracts used is continuously increasing. The prepared systems were characterized afterwards with a great number of methods of investigation: both spectroscopic (especially UV-Vis spectroscopy) and microscopic (in principal, electron microscopy-TEM) methods. The applications of the metal nanoparticles obtained are diverse and not completely known, but the medical applications of such nanoparticles occupy a central place, due to their nontoxic components, but some diverse industrial applications do not have to be forgotten.

  2. A novel classification and online platform for planning and documentation of medical applications of additive manufacturing.

    Science.gov (United States)

    Tuomi, Jukka; Paloheimo, Kaija-Stiina; Vehviläinen, Juho; Björkstrand, Roy; Salmi, Mika; Huotilainen, Eero; Kontio, Risto; Rouse, Stephen; Gibson, Ian; Mäkitie, Antti A

    2014-12-01

    Additive manufacturing technologies are widely used in industrial settings and now increasingly also in several areas of medicine. Various techniques and numerous types of materials are used for these applications. There is a clear need to unify and harmonize the patterns of their use worldwide. We present a 5-class system to aid planning of these applications and related scientific work as well as communication between various actors involved in this field. An online, matrix-based platform and a database were developed for planning and documentation of various solutions. This platform will help the medical community to structurally develop both research innovations and clinical applications of additive manufacturing. The online platform can be accessed through http://www.medicalam.info. © The Author(s) 2014.

  3. Unique identification code for medical fundus images using blood vessel pattern for tele-ophthalmology applications.

    Science.gov (United States)

    Singh, Anushikha; Dutta, Malay Kishore; Sharma, Dilip Kumar

    2016-10-01

    Identification of fundus images during transmission and storage in database for tele-ophthalmology applications is an important issue in modern era. The proposed work presents a novel accurate method for generation of unique identification code for identification of fundus images for tele-ophthalmology applications and storage in databases. Unlike existing methods of steganography and watermarking, this method does not tamper the medical image as nothing is embedded in this approach and there is no loss of medical information. Strategic combination of unique blood vessel pattern and patient ID is considered for generation of unique identification code for the digital fundus images. Segmented blood vessel pattern near the optic disc is strategically combined with patient ID for generation of a unique identification code for the image. The proposed method of medical image identification is tested on the publically available DRIVE and MESSIDOR database of fundus image and results are encouraging. Experimental results indicate the uniqueness of identification code and lossless recovery of patient identity from unique identification code for integrity verification of fundus images. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  4. Principles for new optical techniques in medical diagnostics for mHealth applications

    Science.gov (United States)

    Balsam, Joshua Michael

    Medical diagnostics is a critical element of effective medical treatment. However, many modern and emerging diagnostic technologies are not affordable or compatible with the needs and conditions found in low-income and middle-income countries and regions. Resource-poor areas require low-cost, robust, easy-to-use, and portable diagnostics devices compatible with telemedicine (i.e. mHealth) that can be adapted to meet diverse medical needs. Many suitable devices will need to be based on optical technologies, which are used for many types of biological analyses. This dissertation describes the fabrication and detection principles for several low-cost optical technologies for mHealth applications including: (1) a webcam based multi-wavelength fluorescence plate reader, (2) a lens-free optical detector used for the detection of Botulinum A neurotoxin activity, (3) a low cost micro-array reader that allows the performance of typical fluorescence based assays demonstrated for the detection of the toxin staphylococcal enterotoxin (SEB), and (4) a wide-field flow cytometer for high throughput detection of fluorescently labeled rare cells. This dissertation discusses how these technologies can be harnessed using readily available consumer electronics components such as webcams, cell phones, CCD cameras, LEDs, and laser diodes. There are challenges in developing devices with sufficient sensitivity and specificity, and approaches are presented to overcoming these challenges to create optical detectors that can serve as low cost medical diagnostics in resource-poor settings for mHealth.

  5. Do US Medical Licensing Applications Treat Mental and Physical Illness Equivalently?

    Science.gov (United States)

    Gold, Katherine J; Shih, Elizabeth R; Goldman, Edward B; Schwenk, Thomas L

    2017-06-01

    State medical licensing boards are responsible for evaluating physician impairment. Given the stigma generated by mental health issues among physicians and in the medical training culture, we were interested in whether states asked about mental and physical health conditions differently and whether questions focused on current impairment. Two authors reviewed physician medical licensing applications for US physicians seeking first-time licensing in 2013 in the 50 states and the District of Columbia. Questions about physical and mental health, as well as substance abuse, were identified and coded as to whether or not they asked about diagnosis and/or treatment or limited the questions to conditions causing physician impairment. Forty-three (84%) states asked questions about mental health conditions, 43 (84%) about physical health conditions, and 47 (92%) about substance use. States were more likely to ask for history of treatment and prior hospitalization for mental health and substance use, compared with physical health disorders. Among states asking about mental health, just 23 (53%) limited all questions to disorders causing functional impairment and just 6 (14%) limited to current problems. While most state medical licensing boards ask about mental health conditions or treatment, only half limited queries to disorders causing impairment. Differences in how state licensing boards assess mental health raise important ethical and legal questions about assessing physician ability to practice and may discourage treatment for physicians who might otherwise benefit from appropriate care.

  6. Failure modes and effects criticality analysis and accelerated life testing of LEDs for medical applications

    Science.gov (United States)

    Sawant, M.; Christou, A.

    2012-12-01

    While use of LEDs in Fiber Optics and lighting applications is common, their use in medical diagnostic applications is not very extensive. Since the precise value of light intensity will be used to interpret patient results, understanding failure modes [1-4] is very important. We used the Failure Modes and Effects Criticality Analysis (FMECA) tool to identify the critical failure modes of the LEDs. FMECA involves identification of various failure modes, their effects on the system (LED optical output in this context), their frequency of occurrence, severity and the criticality of the failure modes. The competing failure modes/mechanisms were degradation of: active layer (where electron-hole recombination occurs to emit light), electrodes (provides electrical contact to the semiconductor chip), Indium Tin Oxide (ITO) surface layer (used to improve current spreading and light extraction), plastic encapsulation (protective polymer layer) and packaging failures (bond wires, heat sink separation). A FMECA table is constructed and the criticality is calculated by estimating the failure effect probability (β), failure mode ratio (α), failure rate (λ) and the operating time. Once the critical failure modes were identified, the next steps were generation of prior time to failure distribution and comparing with our accelerated life test data. To generate the prior distributions, data and results from previous investigations were utilized [5-33] where reliability test results of similar LEDs were reported. From the graphs or tabular data, we extracted the time required for the optical power output to reach 80% of its initial value. This is our failure criterion for the medical diagnostic application. Analysis of published data for different LED materials (AlGaInP, GaN, AlGaAs), the Semiconductor Structures (DH, MQW) and the mode of testing (DC, Pulsed) was carried out. The data was categorized according to the materials system and LED structure such as AlGaInP-DH-DC, Al

  7. Radioactive indicators in biology and their medical applications; Indicateurs radioactifs en biologie et leurs applications medicales

    Energy Technology Data Exchange (ETDEWEB)

    Morel, F

    1950-12-01

    This talk was given at the society of promotion of the national industry on December 1, 1949. The report is a pre-print of an article published in L'Industrie Nationale no.2 (1950). It presents the state-of-the-art of the use of artificial radioisotopes in biology and medicine: 1 - definitions (isotopes, decay, radiation emission); 2 - modalities of the use of radioisotopes in biology: basic instrumentation (Geiger-Mueller counter, counting techniques, photography, auto-histo-radiography); 3 - applications in physiology (digestive absorption, excretion, vascular exchanges, tracer techniques) and biochemistry (metabolism, thyroxine synthesis and fixation indicators, tracer techniques for drugs); 4 - radiotherapy, internal and external irradiation. (J.S.)

  8. Bespoke automation of medical workforce rostering using Google’s free cloud applications

    Directory of Open Access Journals (Sweden)

    Peter Benjamin Michael Thomas

    2017-12-01

    Full Text Available Background: Providing safe and consistent care requires optimal deployment of medical staff. Ensuring this happens is a significant administrative burden due to complex working patterns. Objective: To describe a pilot feasibility study of the automation of medical duty rostering in a busy tertiary Ophthalmology department. Methods: A cloud based web application was created using Google’s free cloud services. Users access the system via a website which hosts live rosters, and use electronic forms to submit requests which are automatically handled by Google App Scripts. Results: Over a 2-year period (8/2014-6/2016, the system processed 563 leave requests and 300 on call swaps automatically. 3,300 emails and 1,000 forms were automatically generated. User satisfaction was 100% (n=24. Discussion: Many time consuming aspects of roster management were automated with significant time savings to all parties, allowing increased clinical time for doctors involved in administration. Planning for safe staffing levels was supported.

  9. Simulations of X-ray synchrotron beams using the EGS4 code system in medical applications

    International Nuclear Information System (INIS)

    Orion, I.; Henn, A.; Sagi, I.; Dilmanian, F.A.; Pena, L.; Rosenfeld, A.B.

    2001-01-01

    X-ray synchrotron beams are commonly used in biological and medical research. The availability of intense, polarized low-energy photons from the synchrotron beams provides a high dose transfer to biological materials. The EGS4 code system, which includes the photoelectron angular distribution, electron motion inside a magnetic field, and the LSCAT package, found to be the appropriate Monte Carlo code for synchrotron-produced X-ray simulations. The LSCAT package was developed in 1995 for the EGS4 code to contain the routines to simulate the linear polarization, the bound Compton, and the incoherent scattering functions. Three medical applications were demonstrated using the EGS4 Monte Carlo code as a proficient simulation code system for the synchrotron low-energy X-ray source. (orig.)

  10. Nuclear Data for Medical Applications – Recent Developments and Future Requirements

    International Nuclear Information System (INIS)

    Nichols, A.L.; Capote, R.

    2014-01-01

    Cancer treatment represents a major economic and medical issue because of the extensive incidence of the disease worldwide, with a particularly large rate of increase to be found in developing countries. Over the previous twenty years, the International Atomic Energy Agency (IAEA) has dedicated a series of investigations towards identifying and quantifying the production routes and decay characteristics of radioisotopes judged to be of existing and emerging importance in nuclear medicine and radiotherapy. Both the recommendations formulated during the course of these technical debates and the results of recently completed and on-going IAEA coordinated research projects are focused towards the successful evolution of improvements in nuclear data for medical applications throughout the early 21 st century

  11. New trends in medical and service robots theory and integrated applications

    CERN Document Server

    Bleuler, Hannes; Rodic, Aleksandar; Vaida, Calin; Pisla, Adrian; First International Workshop on Medical and Service Robots

    2014-01-01

    This book contains mainly the selected papers of the First International Workshop on Medical and Service Robots, held in Cluj-Napoca, Romania, in 2012. The high quality of the scientific contributions is the result of a rigorous selection and improvement based on the participants’ exchange of opinions and extensive peer-review. This process has led to the publishing of the present collection of 16 independent valuable contributions and points of view and not as standard symposium or conference proceedings.  The addressed issues are: Computational Kinematics, Mechanism Design, Linkages and Manipulators, Mechanisms for Biomechanics, Mechanics of Robots, Control Issues for Mechanical Systems, Novel Designs, Teaching Methods, all of these being concentrated around robotic systems for medical and service applications.  The results are of interest to researchers and professional practitioners as well as to Ph.D. students in the field of mechanical and electrical engineering.  This volume marks the start of a s...

  12. Radiological protection, safety and security issues in the industrial and medical applications of radiation sources

    Science.gov (United States)

    Vaz, Pedro

    2015-11-01

    The use of radiation sources, namely radioactive sealed or unsealed sources and particle accelerators and beams is ubiquitous in the industrial and medical applications of ionizing radiation. Besides radiological protection of the workers, members of the public and patients in routine situations, the use of radiation sources involves several aspects associated to the mitigation of radiological or nuclear accidents and associated emergency situations. On the other hand, during the last decade security issues became burning issues due to the potential malevolent uses of radioactive sources for the perpetration of terrorist acts using RDD (Radiological Dispersal Devices), RED (Radiation Exposure Devices) or IND (Improvised Nuclear Devices). A stringent set of international legally and non-legally binding instruments, regulations, conventions and treaties regulate nowadays the use of radioactive sources. In this paper, a review of the radiological protection issues associated to the use of radiation sources in the industrial and medical applications of ionizing radiation is performed. The associated radiation safety issues and the prevention and mitigation of incidents and accidents are discussed. A comprehensive discussion of the security issues associated to the global use of radiation sources for the aforementioned applications and the inherent radiation detection requirements will be presented. Scientific, technical, legal, ethical, socio-economic issues are put forward and discussed.

  13. Development of optical FBG force measurement system for the medical application

    Science.gov (United States)

    Song, Hoseok; Kim, Kiyoung; Suh, Jungwook; Lee, Jungju

    2010-03-01

    Haptic feedback plays a very important role in medical surgery. In minimally invasive surgery (MIS), however, very long and stiff bar of instruments take haptic feeling away from the surgeon. In minimally invasive robotic surgery (MIRS), moreover, haptic feelings are totally eliminated. Previous researchers have reported that the absence of force feedback increased the average force magnitude applied to the tissue by at least 50%, and increased the peakforce magnitude by at least a factor of two. Therefore, it is very important to provide haptic information in MIRS. Recently, many sensors are being developed for MIS or MIRS, but they have some obstacles in their application to real situations of medical surgery. The most critical problems are size limit and sterilizability. Optical fiber sensors are one of the most suitable sensors for this environment. Especially, optical fiber Bragg grating (FBG) sensor has one additional advantage than the other optical fiber sensors. FBG sensor is not influenced by intensity of light source. In this paper, we would like to present the initial results of study on the application of the FBG sensor to measure reflected forces in MIRS environments and then suggest the possibility of successful application to the MIRS systems.

  14. Multimedia applications in nursing curriculum: the process of producing streaming videos for medication administration skills.

    Science.gov (United States)

    Sowan, Azizeh K

    2014-07-01

    Streaming videos (SVs) are commonly used multimedia applications in clinical health education. However, there are several negative aspects related to the production and delivery of SVs. Only a few published studies have included sufficient descriptions of the videos and the production process and design innovations. This paper describes the production of innovative SVs for medication administration skills for undergraduate nursing students at a public university in Jordan and focuses on the ethical and cultural issues in producing this type of learning resource. The curriculum development committee approved the modification of educational techniques for medication administration procedures to include SVs within an interactive web-based learning environment. The production process of the videos adhered to established principles for "protecting patients' rights when filming and recording" and included: preproduction, production and postproduction phases. Medication administration skills were videotaped in a skills laboratory where they are usually taught to students and also in a hospital setting with real patients. The lab videos included critical points and Do's and Don'ts and the hospital videos fostered real-world practices. The range of time of the videos was reasonable to eliminate technical difficulty in access. Eight SVs were produced that covered different types of the medication administration skills. The production of SVs required the collaborative efforts of experts in IT, multimedia, nursing and informatics educators, and nursing care providers. Results showed that the videos were well-perceived by students, and the instructors who taught the course. The process of producing the videos in this project can be used as a valuable framework for schools considering utilizing multimedia applications in teaching. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  15. Design and Implementation of a Laser-Based Ammonia Breath Sensor for Medical Applications

    KAUST Repository

    Owen, Kyle

    2012-06-01

    Laser-based sensors can be used as non-invasive monitoring tools to measure parts per billion (ppb) levels of trace gases. Ammonia sensors are useful for applications in environmental pollutant monitoring, atmospheric and combustion kinetic studies, and medical diagnostics. This sensor was specifically designed to measure ammonia in exhaled breath to be used as a medical diagnostic and monitoring tool, however, it can also be extended for use in other applications. Although ammonia is a naturally occurring species in exhaled breath, abnormally elevated levels can be an indication of adverse medical conditions. Laser-based breath diagnostics have many benefits since they are cost effective, non-invasive, painless, real time monitors. They have the potential to improve the quality of medical care by replacing currently used blood tests and providing immediate feedback to physicians. This sensor utilizes a Quantum Cascade Laser and Wavelength Modulation Spectroscopy with second harmonic normalized by first harmonic detection in a 76 m multi-pass absorption cell to measure ppb levels of ammonia with improved sensitivity over previous sensors. Initial measurements to determine the ammonia absorption line parameters were performed using direct absorption spectroscopy. This is the first experimental study of the ammonia absorption line transitions near 1103.46 cm1 with absorption spectroscopy. The linestrengths were measured with uncertainties less than 10%. The collisional broadening coefficients for each of the ammonia lines with nitrogen, oxygen, water vapor, and carbon dioxide were also measured, many of which had uncertainties less than 5%. The sensor was characterized to show a detectability limit of 10 ppb with an uncertainty of less than 5% at typical breath ammonia levels. Initial breath test results showed that some of the patients with chronic kidney disease had elevated ammonia levels while others had ammonia levels in the same range as expected for healthy

  16. Establishment and application of medication error classification standards in nursing care based on the International Classification of Patient Safety

    Directory of Open Access Journals (Sweden)

    Xiao-Ping Zhu

    2014-09-01

    Conclusion: Application of this classification system will help nursing administrators to accurately detect system- and process-related defects leading to medication errors, and enable the factors to be targeted to improve the level of patient safety management.

  17. A continuous usability evaluation of an electronic medication administration record application.

    Science.gov (United States)

    Vicente Oliveros, Noelia; Gramage Caro, Teresa; Pérez Menéndez-Conde, Covadonga; Álvarez-Diaz, Ana María; Martín-Aragón Álvarez, Sagrario; Bermejo Vicedo, Teresa; Delgado Silveira, Eva

    2017-12-01

    The complexity of an electronic medication administration record (eMAR) has been underestimated by most designers in the past. Usability issues, such as poorly designed user application flow in eMAR, are therefore of vital importance, since they can have a negative impact on nursing activities and result in poor outcomes. The purpose of this study was to evaluate the usability of an eMAR application during its development. A usability evaluation was conducted during the development of the eMAR application. Two usability methods were used: a heuristic evaluation complemented by usability testing. Each eMAR application version provided by the vendor was evaluated by 2 hospital pharmacists, who applied the heuristic method. They reviewed the eMAR tasks, detected usability problems and their heuristic violations, and rated the severity of the usability problems. Usability testing was used to assess the final application version by observing how 3 nurses interacted with the application. Thirty-four versions were assessed before the eMAR application was considered usable. During the heuristic evaluation, the usability problems decreased from 46 unique usability problems in version 1 (V1) to 9 in version 34 (V34). In V1, usability problems were categorized into 154 heuristic violations, which decreased to 27 in V34. The average severity rating also decreased from major usability problem (2.96) to no problem (0.23). During usability testing, the 3 nurses did not encounter new usability problems. A thorough heuristic evaluation is a good method for obtaining a usable eMAR application. This evaluation points key areas for improvement and decreases usability problems and their severity. © 2017 John Wiley & Sons, Ltd.

  18. An evaluation of organic light emitting diode monitors for medical applications: great timing, but luminance artifacts.

    Science.gov (United States)

    Elze, Tobias; Taylor, Christopher; Bex, Peter J

    2013-09-01

    implications for applicability to medical imaging.

  19. Handling limited datasets with neural networks in medical applications: A small-data approach.

    Science.gov (United States)

    Shaikhina, Torgyn; Khovanova, Natalia A

    2017-01-01

    Single-centre studies in medical domain are often characterised by limited samples due to the complexity and high costs of patient data collection. Machine learning methods for regression modelling of small datasets (less than 10 observations per predictor variable) remain scarce. Our work bridges this gap by developing a novel framework for application of artificial neural networks (NNs) for regression tasks involving small medical datasets. In order to address the sporadic fluctuations and validation issues that appear in regression NNs trained on small datasets, the method of multiple runs and surrogate data analysis were proposed in this work. The approach was compared to the state-of-the-art ensemble NNs; the effect of dataset size on NN performance was also investigated. The proposed framework was applied for the prediction of compressive strength (CS) of femoral trabecular bone in patients suffering from severe osteoarthritis. The NN model was able to estimate the CS of osteoarthritic trabecular bone from its structural and biological properties with a standard error of 0.85MPa. When evaluated on independent test samples, the NN achieved accuracy of 98.3%, outperforming an ensemble NN model by 11%. We reproduce this result on CS data of another porous solid (concrete) and demonstrate that the proposed framework allows for an NN modelled with as few as 56 samples to generalise on 300 independent test samples with 86.5% accuracy, which is comparable to the performance of an NN developed with 18 times larger dataset (1030 samples). The significance of this work is two-fold: the practical application allows for non-destructive prediction of bone fracture risk, while the novel methodology extends beyond the task considered in this study and provides a general framework for application of regression NNs to medical problems characterised by limited dataset sizes. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

  20. Development of a high resolution voxelised head phantom for medical physics applications.

    Science.gov (United States)

    Giacometti, V; Guatelli, S; Bazalova-Carter, M; Rosenfeld, A B; Schulte, R W

    2017-01-01

    Computational anthropomorphic phantoms have become an important investigation tool for medical imaging and dosimetry for radiotherapy and radiation protection. The development of computational phantoms with realistic anatomical features contribute significantly to the development of novel methods in medical physics. For many applications, it is desirable that such computational phantoms have a real-world physical counterpart in order to verify the obtained results. In this work, we report the development of a voxelised phantom, the HIGH_RES_HEAD, modelling a paediatric head based on the commercial phantom 715-HN (CIRS). HIGH_RES_HEAD is unique for its anatomical details and high spatial resolution (0.18×0.18mm 2 pixel size). The development of such a phantom was required to investigate the performance of a new proton computed tomography (pCT) system, in terms of detector technology and image reconstruction algorithms. The HIGH_RES_HEAD was used in an ad-hoc Geant4 simulation modelling the pCT system. The simulation application was previously validated with respect to experimental results. When compared to a standard spatial resolution voxelised phantom of the same paediatric head, it was shown that in pCT reconstruction studies, the use of the HIGH_RES_HEAD translates into a reduction from 2% to 0.7% of the average relative stopping power difference between experimental and simulated results thus improving the overall quality of the head phantom simulation. The HIGH_RES_HEAD can also be used for other medical physics applications such as treatment planning studies. A second version of the voxelised phantom was created that contains a prototypic base of skull tumour and surrounding organs at risk. Copyright © 2017 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

  1. ANALYSIS OF ELASTIC DEFORMATION OF BRAIDED TUBULAR STRUCTURES FOR MEDICAL APPLICATIONS

    Directory of Open Access Journals (Sweden)

    Mehmet Emin YÜKSEKKAYA

    2001-02-01

    Full Text Available In this study, self-expanding stents were fabricated and analyzed. These stents are in the form of 3-D tubular braided structures made of polymeric materials. This type of structures is used in medicine to open clogged artheries and veins by exerting radial force. The amount of radial force exerted into the membrane should not give any damage to the veins. Therefore, the geometry of the three dimensional tubular braided fabric is analyzed to give an optimum radial force for medical applications.

  2. Mechanical and corrosion properties of binary Mg–Dy alloys for medical applications

    International Nuclear Information System (INIS)

    Yang Lei; Huang Yuanding; Peng Qiuming; Feyerabend, Frank; Kainer, Karl Ulrich; Willumeit, Regine; Hort, Norbert

    2011-01-01

    Microstructure, mechanical and corrosion properties of binary magnesium–dysprosium (Mg-5, 10, 15, 20 wt.% Dy) alloys were investigated for medical applications. In the as-cast condition, the distribution of Dy is quite inhomogeneous. Mg–10Dy alloy exhibits a moderate tensile and compression yield strength, and the best elongation and corrosion resistance. After T4 (solutionizing) treatment, the distribution of Dy becomes homogeneous. The tensile and compression yield strength of all Mg–Dy alloys decreases. The elongation remains unchanged, while the corrosion resistance is largely improved after T4 treatment.

  3. Mechanical and corrosion properties of binary Mg-Dy alloys for medical applications

    Energy Technology Data Exchange (ETDEWEB)

    Yang Lei, E-mail: lei.yang@hzg.de [Helmholtz-Zentrum Geesthacht, Institute of Materials Research, Max-Planck-Str. 1, D-21502 Geesthacht (Germany); Yuanding, Huang; Qiuming, Peng; Feyerabend, Frank; Kainer, Karl Ulrich; Willumeit, Regine; Hort, Norbert [Helmholtz-Zentrum Geesthacht, Institute of Materials Research, Max-Planck-Str. 1, D-21502 Geesthacht (Germany)

    2011-12-15

    Microstructure, mechanical and corrosion properties of binary magnesium-dysprosium (Mg-5, 10, 15, 20 wt.% Dy) alloys were investigated for medical applications. In the as-cast condition, the distribution of Dy is quite inhomogeneous. Mg-10Dy alloy exhibits a moderate tensile and compression yield strength, and the best elongation and corrosion resistance. After T4 (solutionizing) treatment, the distribution of Dy becomes homogeneous. The tensile and compression yield strength of all Mg-Dy alloys decreases. The elongation remains unchanged, while the corrosion resistance is largely improved after T4 treatment.

  4. Potential medical applications of the plasma focus in the radioisotope production for PET imaging

    International Nuclear Information System (INIS)

    Roshan, M.V.; Razaghi, S.; Asghari, F.; Rawat, R.S.; Springham, S.V.; Lee, P.; Lee, S.; Tan, T.L.

    2014-01-01

    Devices other than the accelerators are desired to be investigated for generating high energy particles to induce nuclear reaction and positron emission tomography (PET) producing radioisotopes. The experimental data of plasma focus devices (PF) are studied and the activity scaling law for External Solid Target (EST) activation is established. Based on the scaling law and the techniques to enhance the radioisotopes production, the feasibility of generating the required activity for PET imaging is studied. - Highlights: • Short lived radioisotopes for PET imaging are produced in plasma focus device. • The scaling law of the activity induced with plasma focus energy is established. • The potential medical applications of plasma focus are studied

  5. Current Trends on Medical and Pharmaceutical Applications of Inkjet Printing Technology.

    Science.gov (United States)

    Scoutaris, Nicolaos; Ross, Steven; Douroumis, Dennis

    2016-08-01

    Inkjet printing is an attractive material deposition and patterning technology that has received significant attention in the recent years. It has been exploited for novel applications including high throughput screening, pharmaceutical formulations, medical devices and implants. Moreover, inkjet printing has been implemented in cutting-edge 3D-printing healthcare areas such as tissue engineering and regenerative medicine. Recent inkjet advances enabled 3D printing of artificial cartilage and skin, or cell constructs for transplantation therapies. In the coming years inkjet printing is anticipated to revolutionize personalized medicine and push the innovation portfolio by offering new paths in patient - specific treatments.

  6. [Ten years retrospective review of the application of digital medical technology in general surgery in China].

    Science.gov (United States)

    Fang, C H; Lau, Y Y; Zhou, W P; Cai, W

    2017-12-01

    Digital medical technology is a powerful tool which has forcefully promoted the development of general surgery in China. In this article, we reviews the application status of three-dimensional visualization and three-dimensional printing technology in general surgery, introduces the development situation of surgical navigation guided by optical and electromagnetic technology and preliminary attempt to combined with mixed reality applied to complicated hepatectomy, looks ahead the development direction of digital medicine in the era of artificial intelligence and big data on behalf of surgical robot and radiomics. Surgeons should proactively master these advanced techniques and accelerate the innovative development of general surgery in China.

  7. [The application of forensic medical knowledge for the reconstruction of historical events].

    Science.gov (United States)

    Kovalev, A V; Molin, Yu A; Gorshkov, A N; Smolyanitsky, A G; Mazurova, E A; Vorontsov, G A

    2015-01-01

    The objective of the present study was to summarize the results of many year investigations on the application of forensic medical methods and experience for the reconstruction of historical events including identification of the ancient Russian saints' hallows and statesmen's remains, elucidation of the genuine causes of death of the members of the Russian Imperial House of Romanovs based on the recently discovered archival materials, restoration of the character of the injuries suffered by Aleksander II, M.I. Kutuzov, P. Demidov, G. Gapon., and G. Rasputin, the attribution A.S. Pushkin's memorial belongings based on the biological traces, and the like.

  8. High-quality laser-accelerated ion beams for medical applications

    Energy Technology Data Exchange (ETDEWEB)

    Harman, Zoltan; Keitel, Christoph H. [Max-Planck-Institut fuer Kernphysik, Heidelberg (Germany); Salamin, Yousef I. [Max-Planck-Institut fuer Kernphysik, Heidelberg (Germany); American University of Sharjah (United Arab Emirates)

    2009-07-01

    Cancer radiation therapy requires accelerated ion beams of high energy sharpness and a narrow spatial profile. As shown recently, linearly and radially polarized, tightly focused and thus extremely strong laser beams should permit the direct acceleration of light atomic nuclei up to energies that may offer the potentiality for medical applications. Radially polarized beams have better emittance than their linearly polarized counterparts. We put forward the direct laser acceleration of ions, once the refocusing of ion beams by external fields is solved or radially polarized laser pulses of sufficient power can be generated.

  9. High-dimensional data: p >> n in mathematical statistics and bio-medical applications

    OpenAIRE

    Van De Geer, Sara A.; Van Houwelingen, Hans C.

    2004-01-01

    The workshop 'High-dimensional data: p >> n in mathematical statistics and bio-medical applications' was held at the Lorentz Center in Leiden from 9 to 20 September 2002. This special issue of Bernoulli contains a selection of papers presented at that workshop. ¶ The introduction of high-throughput micro-array technology to measure gene-expression levels and the publication of the pioneering paper by Golub et al. (1999) has brought to life a whole new branch of data analysis under the name of...

  10. Preliminary Investigation of Poly-Ether-Ether-Ketone Based on Fused Deposition Modeling for Medical Applications

    Directory of Open Access Journals (Sweden)

    Feng Zhao

    2018-02-01

    Full Text Available Poly-ether-ether-ketone (PEEK fabricated by fused deposition modeling for medical applications was evaluated in terms of mechanical strength and in vitro cytotoxicity in this study. Orthogonal experiments were firstly designed to investigate the significant factors on tensile strength. Nozzle temperature, platform temperature, and the filament diameter were tightly controlled for improved mechanical strength performance. These sensitive parameters affected the interlayer bonding and solid condition in the samples. Fourier transform infrared (FTIR spectrometry analysis was secondly conducted to compare the functional groups in PEEK granules, filaments, and printed parts. In vitro cytotoxicity test was carried out at last, and no toxic substances were introduced during the printing process.

  11. Study on the Application Mode and Legal Protection of Green Materials in Medical-Nursing Combined Building

    Science.gov (United States)

    Zhiyong, Xian

    2017-09-01

    In the context of green development, green materials are the future trend of Medical-Nursing Combined building. This paper summarizes the concept and types of green building materials. Then, on the basis of existing research, it constructs the green material system framework of Medical-Nursing Combined building, puts forward the application mode of green building materials, and studies the policy and legal protection of green material application.

  12. Stabilization and fabrication of microbubbles: applications for medical purposes and functional materials.

    Science.gov (United States)

    Lee, Mina; Lee, Eun Yeol; Lee, Daeyeon; Park, Bum Jun

    2015-03-21

    Microbubbles with diameters ranging from a few micrometers to tens of micrometers have garnered significant attention in various applications including food processing, water treatment, enhanced oil recovery, surface cleaning, medical purposes, and material preparation fields with versatile functionalities. A variety of techniques have been developed to prepare microbubbles, such as ultrasonication, excimer laser ablation, high shear emulsification, membrane emulsification, an inkjet printing method, electrohydrodynamic atomization, template layer-by-layer deposition, and microfluidics. Generated bubbles should be immediately stabilized via the adsorption of stabilizing materials (e.g., surfactants, lipids, proteins, and solid particles) onto the gas-liquid interface to lower the interfacial tension. Such adsorption of stabilizers prevents coalescence between the microbubbles and also suppresses gas dissolution and resulting disproportionation caused by the presence of the Laplace overpressure across the gas-liquid interface. Herein, we comprehensively review three important topics of microbubbles: stabilization, fabrication, and applications.

  13. ELIMED: MEDICAL APPLICATION AT ELI-BEAMLINES. STATUS OF THE COLLABORATION AND FIRST RESULTS

    Directory of Open Access Journals (Sweden)

    Francesco Schillaci

    2014-08-01

    Full Text Available ELI-Beamlines is one of the four pillars of the ELI (Extreme Light Infrastructure pan-European project. It will be an ultrahigh-intensity, high repetition-rate, femtosecond laser facility whose main goal is to generate and apply high-brightness X-ray sources and accelerated charged particles. In particular, medical applications are treated by the ELIMED task force, which has been launched by collaboration between ELI and INFN researchers. ELIMED aims to demonstrate the clinical applicability of laser accelerated ions. In this article, the state of the ELIMED project and the first scientific results are reported. The design and realisation of a preliminary beam handling system and of an advanced spectrometer for diagnostics of high energy (multi-MeV laser-accelerated ion beams will also be briefly presented.

  14. New non-cognitive procedures for medical applicant selection: a qualitative analysis in one school.

    Science.gov (United States)

    Katz, Sara; Vinker, Shlomo

    2014-11-07

    Recent data have called into question the reliability and predictive validity of standard admission procedures to medical schools. Eliciting non-cognitive attributes of medical school applicants using qualitative tools and methods has thus become a major challenge. 299 applicants aged 18-25 formed the research group. A set of six research tools was developed in addition to the two existing ones. These included: a portfolio task, an intuitive task, a cognitive task, a personal task, an open self-efficacy questionnaire and field-notes. The criteria-based methodology design used constant comparative analysis and grounded theory techniques to produce a personal attributes profile per participant, scored on a 5-point scale holistic rubric. Qualitative validity of data gathering was checked by comparing the profiles elicited from the existing interview against the profiles elicited from the other tools, and by comparing two profiles of each of the applicants who handed in two portfolio tasks. Qualitative validity of data analysis was checked by comparing researcher results with those of an external rater (n =10). Differences between aggregated profile groups were checked by the Npar Wilcoxon Signed Ranks Test and by Spearman Rank Order Correlation Test. All subjects gave written informed consent to their participation. Privacy was protected by using code numbers. A concept map of 12 personal attributes emerged, the core constructs of which were motivation, sociability and cognition. A personal profile was elicited. Inter-rater agreement was 83.3%. Differences between groups by aggregated profiles were found significant (p < .05, p < .01, p < .001).A random sample of sixth year students (n = 12) underwent the same admission procedure as the research group. Rank order was different; and arrogance was a new construct elicited in the sixth year group. This study suggests a broadening of the methodology for selecting medical school applicants. This methodology

  15. High-performance floating-point image computing workstation for medical applications

    Science.gov (United States)

    Mills, Karl S.; Wong, Gilman K.; Kim, Yongmin

    1990-07-01

    The medical imaging field relies increasingly on imaging and graphics techniques in diverse applications with needs similar to (or more stringent than) those of the military, industrial and scientific communities. However, most image processing and graphics systems available for use in medical imaging today are either expensive, specialized, or in most cases both. High performance imaging and graphics workstations which can provide real-time results for a number of applications, while maintaining affordability and flexibility, can facilitate the application of digital image computing techniques in many different areas. This paper describes the hardware and software architecture of a medium-cost floating-point image processing and display subsystem for the NeXT computer, and its applications as a medical imaging workstation. Medical imaging applications of the workstation include use in a Picture Archiving and Communications System (PACS), in multimodal image processing and 3-D graphics workstation for a broad range of imaging modalities, and as an electronic alternator utilizing its multiple monitor display capability and large and fast frame buffer. The subsystem provides a 2048 x 2048 x 32-bit frame buffer (16 Mbytes of image storage) and supports both 8-bit gray scale and 32-bit true color images. When used to display 8-bit gray scale images, up to four different 256-color palettes may be used for each of four 2K x 2K x 8-bit image frames. Three of these image frames can be used simultaneously to provide pixel selectable region of interest display. A 1280 x 1024 pixel screen with 1: 1 aspect ratio can be windowed into the frame buffer for display of any portion of the processed image or images. In addition, the system provides hardware support for integer zoom and an 82-color cursor. This subsystem is implemented on an add-in board occupying a single slot in the NeXT computer. Up to three boards may be added to the NeXT for multiple display capability (e

  16. A dual use case study of space technologies for terrestrial medical applications (Conference Presentation)

    Science.gov (United States)

    Cozmuta, Ioana

    2017-05-01

    Many challenges exist in understanding the human body as a whole, its adaptability, its resilience, its immunological response, its healing and regeneration power. New knowledge is usually obtained by exploring unique conditions and environments and space is one such variable. Primarily, these attributes have been studied in space for the purpose of understanding the effect of the space environment on long duration space travel. However a myriad of lessons learned have emerged that are important for terrestrial medicine problems such as cardiovascular changes, intracranial pressure changes, vision changes, reduced immunity, etc. For medical study purposes, the changes induced by the space environment on the human body are in general fast and predictable; they persist while in the space environment but also revert to the initial pre-flight healthy state upon return to Earth. This provides a unique cycle to study wellness and disease prediction as well as to develop more effective countermeasures for the benefit of people on earth. At a scientific level, the environment of space can be used to develop new lines of investigations and new knowledge to push the terrestrial state of the art (i.e. study of phase diagrams, identification of new system's states, etc). Moreover, the specialized requirements for space medicine have driven advances in terrestrial medical technologies in areas such as monitoring, diagnostic, prevention and treatment. This talk will provide an overview of compelling examples in key areas of interest for terrestrial medical applications.

  17. Evaluation of HVS models in the application of medical image quality assessment

    Science.gov (United States)

    Zhang, L.; Cavaro-Menard, C.; Le Callet, P.

    2012-03-01

    In this study, four of the most widely used Human Visual System (HVS) models are applied on Magnetic Resonance (MR) images for signal detection task. Their performances are evaluated against gold standard derived from radiologists' majority decision. The task-based image quality assessment requires taking into account the human perception specificities, for which various HVS models have been proposed. However to our knowledge, no work was conducted to evaluate and compare the suitability of these models with respect to the assessment of medical image qualities. This pioneering study investigates the performances of different HVS models on medical images in terms of approximation to radiologist performance. We propose to score the performance of each HVS model using the AUC (Area Under the receiver operating characteristic Curve) and its variance estimate as the figure of merit. The radiologists' majority decision is used as gold standard so that the estimated AUC measures the distance between the HVS model and the radiologist perception. To calculate the variance estimate of AUC, we adopted the one-shot method that is independent of the HVS model's output range. The results of this study will help to provide arguments to the application of some HVS model on our future medical image quality assessment metric.

  18. Using a Java Dynamic Tree to manage the terminology in a suite of medical applications.

    Science.gov (United States)

    Yang, K; Evens, M W; Trace, D A

    2008-01-01

    Now that the National Library of Medicine has made SNOMED-CT widely available, we are trying to manage the terminology of a whole suite of medical applications and map our terminology into that in SNOMED. This paper describes the design and implementation of the Java Dynamic Tree that provides structure to our medical terminology and explains how it functions as the core of our system. The tree was designed to reflect the stages in a patient interview, so it contains components for identifying the patient and the provider, a large set of chief complaints, review of systems, physical examination, several history modules, medications, laboratory tests, imaging, and special procedures. The tree is mirrored in a commercial DBMS, which also stores multi-encounter patient data, disorder patterns for our Bayesian diagnostic system, and the data and rules for other expert systems. The DBMS facilitates the import and export of large terminology files. Our Java Dynamic Tree allows the health care provider to view the entire terminology along with the structure that supports it, as well as the mechanism for the generation of progress notes and other documents, in terms of a single hierarchical structure. Changes in terminology can be propagated through the system under the control of the expert. The import/ export facility has been a major help by replacing our original terminology by the terminology in SNOMED-CT.

  19. Algorithms for Image Analysis and Combination of Pattern Classifiers with Application to Medical Diagnosis

    Science.gov (United States)

    Georgiou, Harris

    2009-10-01

    Medical Informatics and the application of modern signal processing in the assistance of the diagnostic process in medical imaging is one of the more recent and active research areas today. This thesis addresses a variety of issues related to the general problem of medical image analysis, specifically in mammography, and presents a series of algorithms and design approaches for all the intermediate levels of a modern system for computer-aided diagnosis (CAD). The diagnostic problem is analyzed with a systematic approach, first defining the imaging characteristics and features that are relevant to probable pathology in mammo-grams. Next, these features are quantified and fused into new, integrated radio-logical systems that exhibit embedded digital signal processing, in order to improve the final result and minimize the radiological dose for the patient. In a higher level, special algorithms are designed for detecting and encoding these clinically interest-ing imaging features, in order to be used as input to advanced pattern classifiers and machine learning models. Finally, these approaches are extended in multi-classifier models under the scope of Game Theory and optimum collective deci-sion, in order to produce efficient solutions for combining classifiers with minimum computational costs for advanced diagnostic systems. The material covered in this thesis is related to a total of 18 published papers, 6 in scientific journals and 12 in international conferences.

  20. Smart Medical Systems with Application to Nutrition and Fitness in Space

    Science.gov (United States)

    Soller, Babs R.; Cabrera, Marco; Smith, Scott M.; Sutton, Jeffrey P.

    2002-01-01

    Smart medical systems are being developed to allow medical treatments to address alterations in chemical and physiological status in real time. In a smart medical system sensor arrays assess subject status, which are interpreted by computer processors which analyze multiple inputs and recommend treatment interventions. The response of the subject to the treatment is again assessed by the sensor arrays, closing the loop. An early form of "smart medicine" has been practiced in space to assess nutrition. Nutrient levels are assessed with food frequency questionnaires, which are interpreted by flight surgeons to recommend in-flight alterations in diet. In the future, sensor arrays will directly probe body chemistry. Near infrared spectroscopy can be used to noninvasively measure several blood and tissue parameters which are important in the assessment of nutrition and fitness. In particular, this technology can be used to measure blood hematocrit and interstitial fluid pH. The noninvasive measurement of interstitial pH is discussed as a surrogate for blood lactate measurement for the development and real-time assessment of exercise protocols in space. Earth-based application of these sensors are also described.