WorldWideScience

Sample records for mediante sensores remotos

  1. Desarrollo de un sensor de temperatura remoto basado en la radiación infrarroja

    Díaz García, Abraham de los Ángeles

    2012-01-01

    Este proyecto fin de carrera se centra en el estudio y diseño de un sensor de temperatura remoto. El objetivo principal del proyecto es desarrollar un dispositivo capaz de obtener la temperatura de un objeto situado a una cierta distancia, conocida su emisividad y la radiación infrarroja emitida por éste. Además, se plantea dentro de este proyecto el estudio de los principios básicos de termometría infrarroja y la clasificación de los distintos tipos de termopilas en el mercado atendiendo a s...

  2. Sistema de monitorización de equipos remotos mediante dispositivos Android

    Cruz Sánchez, Mario

    2015-01-01

    Este proyecto describe el desarrollo práctico de un sistema de telecontrol y tele medida basado en dispositivos Android. Dispondremos de varios equipos autónomos equipados con un módem GPRS, un receptor GPS y dos entradas analógicas para medir dos magnitudes variables. Estos equipos enviarán datos a un servidor que los almacenará en una base de datos. A través de dispositivos Android se podrán hacer lecturas de las mediciones de cada sensor en tiempo real y mostrar informes de ...

  3. Estimación de evapotranspiración real en trigo con distintas condiciones de estrés hídrico: aplicación de modelos y sensores remotos

    Iglesias, María del Rosario

    2016-01-01

    Tesis (Magister en Aplicaciones Espaciales de Alerta y Respuesta Temprana a Emergencias)--Universidad Nacional de Córdoba, Facultad de Matemática, Astronomía y Física, 2016. Maestría conjunta con el Instituto de Altos Estudios Espaciales "Mario Gulich"-CONAE El objetivo principal de esta tesis es estimar la evapotranspiración real de un cultivo de trigo, mediante modelos semiempírico, que incorporan datos de sensores remotos y de sensores meteorológicos a campo. También, se corroboró la...

  4. Integración de dispositivos físicos en un laboratorio remoto de control mediante diferentes plataformas: Labview, Matlab y C/C++

    R. Costa-Castelló

    2010-01-01

    Full Text Available Resumen: Los laboratorios remotos de control posibilitan la realización de prácticas con equipos físicos reales que se encuentran ubicados en entornos remotos siendo accesibles por parte de los alumnos en cualquier instante de tiempo y desde cualquier lugar con conexión a Internet. En este artículo se presenta un conjunto de dispositivos físicos incorporados dentro de una esquema global de laboratorios remotos (AutomatL@bs que posibilitan la realización de prácticas a distancia con estos dispositivos. El rasgo principal común a estos dispositivos consiste en que posibilitan la actuación con sistemas físicos remotos para la realización de prácticas de control clásico con los mismos. Se prestará una especial atención a las diferentes posibilidades de comunicación entre la herramienta visual que dispone el usuario para su interconexión basada en Easy Java Simulations, y la conexión directa con los dispositivos físicos ubicados en los laboratorios remotos. Estos sistemas se han empleado para la realización de prácticas dentro del sistema AutomatL@bs desde el curso 1997/98. Palabras clave: Educación en Control, Laboratorio remoto, Laboratorio virtual, Control remoto, Control PID, Técnicas de Laboratorio

  5. PATRONES ESPECTRALES MULTI-ANGULARES DE CLASES GLOBALES DE COBERTURAS DEL SUELO USANDO, EL SENSOR REMOTO POLDER-1

    Fernando Paz

    2015-04-01

    Full Text Available El uso de información espectral multi-angular de sensores remotos en plataformas espaciales tiene el potencial de discriminar clases de coberturas del suelo y otras aplicaciones. En este trabajo se explora el uso de la base del sensor POLDER-1(fuera de operación en la plataforma ADEOS, el cual permitió obtener hasta 14 mediciones multi-angulares de un mismo pixel. La base de datos fue analizada ajustando un modelo de la función de distribución bidireccional de las reflectancias (BRDF en las bandas centradas en 443, 565, 670, 765 y 865 micrómetros, para diferentes clases de cobertura del suelo del sistema GLC2000 y así analizar el potencial de usar información multi-angular para discriminar clases de cobertura. Los resultados mostraron los mejores ajustes en las bandas 765 y 865, seguidos por las bandas 565 y 670 y, finalmente, los peores ajustes se dieron en la banda 443. Los errores de ajuste pueden ser interpretados por problemas en la corrección atmosférica asociada a los aerosoles troposféricos (mayores efectos en las bandas del visible. Con el modelo de la BRDF ajustado, que usa un solo parámetro (G, se analizó su uso para discriminar clases de cobertura, resultando que la banda 670, seguida por la 443, mostraron un mayor potencial, con una precisión aceptable, de realizar una clasificación de coberturas del suelo.

  6. Teleoperación de un vehículo remoto en un medio de acceso inalámbrico mediante el uso de una interfaz háptica Remote vehicle teleoperation through a haptic interface

    Arys Carrasquilla Batista

    2012-11-01

    Full Text Available La teleoperación permite que el ser humano pueda llevar a cabo ciertas tareas en lugares muy lejanos, de difícil acceso o de condiciones hostiles para la presencia de un operador. Con este proyecto se logró teleoperar un vehículo remoto por medio del protocolo de comunicación Bluetooth, para lo cual se adaptó una interfaz háptica (Novint Falcon. Desde la interfaz, el operador puede enviar la consigna de movimiento y, además, obtener sensaciones conforme a la información de los sensores incluidos al sistema. Como vehículo remoto se utilizó un Lego Mindstorms con capacidad de comunicación Bluetooth, al cual se incorporó un sensor de contacto y otro de ultrasonido con el fin de percibir en la interfaz háptica la retroalimentación de fuerzas. A una computadora estándar se le dio capacidad de comunicación Bluetooth por medio de un adaptador USB, desde la cual se ejecuta un programa creado en C++ para controlar las acciones de la interfaz háptica, enviar los comandos de movimiento al vehículo y recibir la información de los sensores, la cual reproduce sensaciones al operador.Teleoperation allows human beings to carry out certain tasks in places far away, inaccessible or with hostile conditions for the presence of an operator. In this project a remote vehicle is teleoperated using a bluetooth wireless connection, to accomplish this an haptic interface (Novint Falcon was used. The operator can give movement instructions to the vehicle and obtain sensations, according to the information received from the sensors connected to the system. The remote vehicle was a Lego Mindstorms with bluetooth communication capabilities, a touch sensor and ultrasonic sensor were included in order to perceive reflection of forces through the haptic interface. A USB adapter for bluetooth communication was added to a standard computer; a program in C++ is executed over this computer to control the haptic interface, send movement commands to the vehicle and

  7. Rodalización mediante sistemas de información geográfica y sensores remotos

    Rene González Murguía

    2012-02-01

    Full Text Available Este trabajo de investigación se realizó en el ejido Pueblo Nuevo, estado de Durango, México. El objetivo es establecer una metodología para modelar y crear la división dasocrática de zonas forestales hasta nivel de subrodal. Para ello se utilizó información topográfica del Instituto Nacional de Estadística, Geografía e Informática (INEGI escala 1:50 000 y una imagen de satélite Landsat-ETM+ del 8 de abril del 2000. A partir de la información topográfica se generó un modelo digital de elevación con resolución espacial de 15 x 15 m, y se modelaron cuencas, subcuencas, microcuencas, submicrocuencas y cauces. La imagen Landsat-ETM+ fue remuestreada a 15 x 15 m con ayuda de la imagen pancromática para obtener mayor resolución espacial. Se clasificó la imagen por medio de estadísticas supervisadas con trabajo de campo para mapear los diferentes tipos de comunidades vegetales y usos de suelo. Se digitalizaron los rodales actuales creados por los prestadores de servicios técnicos forestales del ejido para su comparación. A partir del modelo digital de elevación se generaron los modelos de pendientes y exposición, para buscar asociación comparativa con los polígonos de rodales actuales. Se comparó la distribución de comunidades vegetales clasificadas contra el modelo de exposición para determinar patrones preferenciales de distribución. Los rodales modelados fueron obtenidos de la integración de las submicrocuencas modeladas y del modelo de patrones preferenciales de distribución de la vegetación. Y los subrodales fueron generados de la integración de los rodales modelados y de la clasificación de tipos de vegetación de la imagen Landsat-ETM+.

  8. Teledetección de Gases mediante Sensores Infrarrojo (IR)

    López Martínez, Fernando

    2008-01-01

    El LIR- UC3M, Laboratorio de Sensores IR de la Universidad Carlos III, ha desarrollado técnicas de análisis multi e hiperespectral IR para la teledetección de gases. Ofrece el diseño de sensores específicos para determinar la presencia de gases y su concentración. La práctica totalidad de los gases (CO2, CO, NO2, O3, HC o NH, etc.) implicados en la seguridad industrial, ambiental o militar pueden ser detectados. Se busca empresas o centros interesados en el uso de sensores de aplicación e...

  9. Aplicaciones y retos del sensado remoto hiperespectral en la geología colombiana

    Ariolfo Camacho-Velasco

    2015-09-01

    Full Text Available El Sensado Remoto (SR es una técnica que permite captar información de una escena sin entrar en contacto físico con ella, mediante el empleo de sensores ubicados, principalmente, en plataformas aéreas, los cuales captan información en diferentes rangos del espectro electromagnético, incluyendo el visible (VIS, el cercano al infrarrojo (NIR y el de ondas cortas del infrarrojo (SWIR. Teniendo en cuenta que cada material presente en una escena tiene características espectrales diferentes, es posible, a través del análisis de las firmas espectrales, realizar su identificación o clasificación mediante algoritmos. Las Imágenes Hiperespectrales (HSI captadas por sensores remotos en cientos de bandas espectrales son de importancia en áreas como la geología, la mineralogía, la agronomía y la ecología, entre otras; sin embargo, el gran volumen de literatura dispersa en diferentes líneas (SR, HSI y geología dificulta su acceso y análisis. Este trabajo presenta un compendio de conceptos, principios básicos y fundamentos matemáticos del SR, e incluye investigaciones y tendencias de él, destacando su desarrollo y sus retos en Colombia, y un caso de uso de HSI en la geología colombiana, cuyas evaluaciones muestran la capacidad de detección del sensor hiperespectral Hyperion, ubicado en el satélite EO-1, para el mapeo geológico en un sitio de prueba al noroccidente del municipio de Girón, departamento de Santander. Los resultados de las evaluaciones son satisfactorios; espectralmente, el coeficiente de correlación fue alto y la relación espacial entre la firma espectral obtenida y la geología conocida del área fue aceptable y correspondió al análisis de Difracción de Rayos X (DRX realizado a muestras tomadas del área de estudio.

  10. Diseño de un laboratorio remoto de robots y procesos de manufactura industriales

    Rafael Castillo Ortega

    2013-12-01

    Full Text Available El presente artículo aborda el diseño de un Laboratorio Remoto de Robots y Procesos de Manufactura Industriales. Primero se presenta el estado del arte y después se expone una propuesta que consiste en acceder por software al escritorio remoto de las PC que controlan dichos dispositivos y también acceder por hardware a un dispositivo diseñado para manipular el Teach pendant (consola de programación de los robots industriales para su programación sin modificar tanto el software propietario como el hardware original de cada equipo. Se utilizó un servidor web tipo LAMP programado con software libre para la administración del uso de los equipos; la retroalimentación de los usuarios remotos se realizó mediante monitoreo con cámaras IP.

  11. CLASIFICACIÓN NO SUPERVISADA DE COBERTURAS VEGETALES SOBRE IMÁGENES DIGITALES DE SENSORES REMOTOS: “LANDSAT - ETM+” NONSUPERVISED CLASSIFICATION OF VEGETABLE COVERS ON DIGITAL IMAGES OF REMOTE SENSORS: "LANDSAT - ETM+"

    Mauricio Arango Gutiérrez

    2005-06-01

    Full Text Available La diversidad de especies vegetales presentes en Colombia y la falta de inventario sobre ellas hace pensar en un proceso que facilite la labor de los investigadores en estas disciplinas. Los sensores remotos satelitales como el LANDSAT ETM+ y las técnicas de inteligencia artificial no supervisadas, como los Self-Organizing Maps - SOM, podrían proveer una alternativa viable para avanzar en la obtención rápida de información que corresponda a zonas con diferentes coberturas vegetales presentes en la geografía nacional. La zona propuesta para el caso en estudio fue clasificada de forma supervisada por el método de máxima similitud en otro trabajo de investigación en ciencias forestales y se discriminaron ocho tipos de coberturas vegetales. Esta información sirvió como patrón de medida para evaluar el desempeño de los clasificadores no supervisados ISODATA y SOM. Sin embargo, la información que proveen las imágenes debió ser depurada previamente de acuerdo a los criterios de uso y calidad de los datos de manera que se utilizara la información adecuada para estos métodos no supervisados. Para esto se recurrió a varios conceptos como las estadísticas de las imágenes, el comportamiento espectral de las comunidades vegetales, las características del sensor y la divergencia promedio que permitieron definir las mejores bandas y sus combinaciones. Sobre éstas se aplicó el concepto de análisis de componentes principales que permitió reducir el número de datos conservando un gran porcentaje de la información. Sobre estos datos depurados se aplicaron las técnicas no supervisadas modificando algunos parámetros que pudieran mostrar una mejor convergencia de los métodos. Los resultados obtenidos se compararon con la clasificación supervisada a través de matrices de confusión y se concluye que no hay una buena convergencia de los métodos de clasificación no supervisada con este proceso para el caso de las coberturas vegetales

  12. Un Banco de Pruebas Remoto para Experimentación en Robótica Ubicua

    Adrián Jiménez-González

    2014-01-01

    Full Text Available Resumen: La escasez de herramientas experimentales adecuadas ha sido señalada como un factor crítico en el desarrollo de la robótica ubícua. Este artículo describe un banco de pruebas remoto para experimentación en robótica ubicua integrando robots con redes inalámbricas de sensores. El banco de pruebas está compuesto por 5 robots Pioneer 3-AT, por una red de cámaras y por una red inalámbrica de sensores, todos ellos equipados con una amplia variedad de sensores. La arquitectura del banco de pruebas permite una gran diversidad de esquemas de cooperación entre sus elementos abstrayendo sus particularidades y capacidades sensoriales, computacionales y de comunicaciones. Permite ejecutar experimentos con distintos grados de descentralización. El banco de pruebas, instalado en la Escuela Técnica Superior de Ingeniería de la Universidad de Sevilla, es abierto y hace posible el acceso de forma remota mediante una interfaz gráfica intuitiva. Abstract: The lack of adequate experimental tools has been highligh- ted as a major critical issue in the development of ubiquitous ro- botics integrating mobile robots and wireless sensor networks. This paper describes a remotely operated testbed for ubiquitous robotics experimentation. It is currently comprised of 5 Pio- neer 3-AT robots, a camera network and a wireless sensor net- work WSN, each equipped with widespread off-the-shelf sen- sors. The testbed architecture allows wide variety of coopera- tion schemes among its elements, abstracting their particula- rities and sensory, computational and communication capabi- lities. It also allows performing experiments with different de- grees of decentralization. The testbed, currently deployed in the School of Engineering at the University of Seville, is open and can be accessed remotely through a friendly graphical user in- terface. Palabras clave: Bancos de pruebas, robótica ubicua, redes inalámbricas de sensores, Keywords: testbeds, networked

  13. Infraestructura para laboratorios de acceso remoto

    López Luro, Francisco

    2009-01-01

    Full Text Available Las tecnologías de Internet permiten el uso de sistemas de software distribuido para el acceso en forma remota a laboratorios físicos y virtuales, para llevar a cabo actividades de investigación experimental a distancia. A partir de los marcos teóricos que definen los estructurantes de los laboratorios, los implementadores de laboratorios de acceso remoto deben diseñar y desarrollar arquitecturas de servicios que permitan un acceso flexible y controlado. Este trabajo define una infraestructura para la implementación de aplicaciones para el acceso remoto a laboratorios físicos y virtuales y para la gestión de los mismos. Se presentan conceptos que permiten extender la modalidad tradicional de conexión con un dispositivo, para llevar adelante actividades prácticas de laboratorio colaborativas y concurrentes.

  14. Alarma activada por control remoto selectivo.

    Eguíluz Morán, Luis Ignacio; Lara Santillán, Pedro María; Mañana Canteli, Mario

    1995-01-01

    La finalidad de esta invención consiste en disponer de una alarma que bien evite el robo de objetos ligeros y portátiles por el procedimiento que se conoce como "del tirón" --es decir, arrebatar algo y salir corriendo--, bien permita identificar un equipaje entre otros. La originalidad del dispositivo reside en la activación/desactivación del dispositivo de sonido por control remoto, así como la posibilidad de seleccionar el sonido de salida dependiendo de su finalidad. Se reivindica como de ...

  15. Experiencia de Uso de un Laboratorio Remoto de Control

    Nourdine Aliane

    2010-01-01

    Full Text Available Resumen: En los últimos años, hemos asistido a un desarrollo significativo de los laboratorios remotos. Su integración en el ámbito académico ofrece muchas ventajas desde el punto de vista logístico, pero también conlleva un impacto substancial desde el punto de vistas pedagógico. En este trabajo se presenta una experiencia de utilización de un laboratorio remoto de control, cuyo objetivo es mostrar el alcance de la experimentación remota desde el punto de vista de los alumnos así como desde la perspectiva del profesor. Palabras clave: Laboratorios Remotos, Ingeniería de Control, Educación

  16. DESARROLLO TECNOLÓGICO DE LOS LABORATORIOS REMOTOS DE ESTRUCTURAS E INGENIERÍA SÍSMICA Y DINÁMICA ESTRUCTURAL

    John Anderson Sandoval Moreno

    2008-01-01

    Full Text Available Este documento presenta el diseño y automatización de dos Laboratorios Remotos manejados virtualmente a través de Internet: Laboratorio Remoto de Estructuras y Laboratorio Remoto de Ingeniería Sísmica y Dinámica Estructural; el laboratorio de estructuras consta de 3 módulos correspondientes al Módulo de Estabilidad, Módulo de Resistencia de Materiales y Módulo del Marco Universal. El módulo de dinámica estructural es una mesa vibratoria que a través de un sistema de control reproducediferentes movimientos como sismos, impulsos y vibraciones armónicas y permite realizar ensayos con pequeñas estructuras modelo. A cada módulo se le adicionaron actuadores y sensores electrónicos de desplazamiento, aceleración, y fuerza, una tarjeta de adquisición de datos para enviar y recibir señales y comunicar el hardware de experimentación con el computador asociado; los cuales se interconectan a un Servidor Central que recibe a los usuarios y autoriza el acceso al móduloexperimental adecuado gracias a la interconexión de estos equipos por medio de un switch. Además, se presenta la estructura general de las interfaces de experimentación y el procedimiento realizado por el estudiante para utilizar los laboratorios remotos.

  17. Controlo remoto de condições ambientais

    Valente, Bruno Alexandre Loureiro

    2009-01-01

    Relatório de projecto no âmbito de Bolsa Universidade de Lisboa/Fundação Amadeu Dias (2008/2009) Universidade de Lisboa, Faculdade de Ciências, LASIGE Foi tomado em conta neste projecto o desafio de oferecer um serviço remoto de domótica. Assumindo que a maioria das pessoas não têm tempo para pensar nelas mesmo nem no mundo que as rodeiam e que desejam uma forma fácil e eficiente de controlar as suas casas foi criada uma aplicação que lhes desse a oportunidade de desfrutarem...

  18. Interfaz Hombre-Máquina mediante un Sensor de Posición sin contacto por Infrarojos

    García García, Juan Carlos; Christensen, Henrik Vie; Mazo Quintas, Manuel

    2005-01-01

    of the user, so that the field of view is not limited. Tests on a wheelchair have shown that the system is functioning in real life, and that the vehicle can be driven at normal speeds in a simple and natural way. The behaviour of the sensor and the generated commands are fully programmable, so it can...

  19. Controle Remoto: principio de funcionamento (parte 1 de 2

    Marisa Almeida Cavalcante

    2013-10-01

    Full Text Available http://dx.doi.org/10.5007/2175-7941.2013v30n3p554 Este trabalho tem como principal objetivo a difusão da utilização do micro-controlador Arduino, no ensino e aprendizagem de Física Moderna. Para isso, elaboramos uma sequência didática com o objetivo de explorar o funcionamento de controles remoto. Esta sequência será apresentada em dois módulos; o primeiro deles destinado ao estudo dos fenômenos físicos envolvidos na transmissão de sinais sem fio por meio de radiação infravermelha e, que será objeto desta 1ª parte do artigo. O segundo módulo destinado à compreensão do modelo associado à lógica e interpretação dos sinais pelo receptor infravermelho. Para este último, atividades são desenvolvidas acoplando o receptor IR da serie PNA4601M ao micro-controlador Arduino, que interpreta e executa ações a partir dos códigos recebidos. Todos os experimentos propostos nestes módulos visam tornar possível a compreensão não apenas do funcionamento de um controle remoto, mas de todo o processo de comunicação envolvido e dos diferentes comandos/códigos advindos de cada tecla. Pretendemos, com isso, explorar conceitos de física a partir de instrumentos e aplicações tecnológicas presentes no dia a dia dos estudantes, tornando as aulas de Física mais dinâmicas e motivadoras.

  20. O SENSORIAMENTO REMOTO E A CARTOGRAFIA COMO INSTRUMENTOS PEDAGÓGICOS NO ENSINO DE GEOGRAFIA

    Ana Letícia Silva Ferreira

    2016-03-01

    procedures, literature surveys were made, choose the scope and level of education as well as the preparation of work proposals. During the research it is noticed the interest and the ease with which students have to learn to cartography (deployment modes: punctual, linear and zonal when made an approach through remote sensing images (interpretation patterns, managing to get a better understanding of the geographical space. We conclude that combining the knowledge of remote sensing and mapping in the context of teaching allows students better know their place, become familiar with the vertical view, do interrelations between issues and to develop the field of cartographic language.   Keywords: Geography Teaching; Geotechnology; Cartography; Elementary School.   LA TELEDETECCIÓN Y LA CARTOGRAFÍA COMO HERRAMIENTA EDUCATIVA EN LA ENSEÑANZA DE LA GEOGRAFIA   RESUMEN Sensores remotos y mapeo son campos de conocimiento geográfico y, como tal, no ellos o negligencia debe disociarse de su existencia, como se observa comúnmente en las escuelas primarias. El estudiante del siglo XXI es por excelencia una tecnología dominante nacido. El propósito de este artículo es demostrar cómo se puede utilizar la teledetección y la cartografía como herramienta para mejorar la calidad de la geografía componente curricular en el nivel fundamental. Entre los procedimientos metodológicos, se realizaron exámenes de la bibliografía, seleccionar el alcance y el nivel de educación, y la preparación de propuestas de trabajo. Durante la investigación es evidente el interés y la facilidad con la que los estudiantes tienen que aprender a la cartografía (modos de implementación: puntual, lineal y zonal, cuando se hace una aproximación a través de imágenes de teledetección (patrones de interpretación la gestión para obtener una mejor comprensión del espacio geográfico. Se concluye que la combinación de los conocimientos de la teledetección y la cartografía en el contexto de la

  1. Redes neurais artificiais auto-organizáveis na classificação não-supervisionada de imagens multiespectrais de sensoriamento remoto

    Christopher Silva de Pádua

    2016-01-01

    O uso de imagens provenientes de sensores remotos, tal como sistemas acoplados em aviões e satélites, é cada vez mais frequente, uma vez que permite o monitoramento continuo e periódico ao longo do tempo por meio de diversas observações de uma mesma região, por vezes ampla ou de difícil acesso. Essa ferramenta tem se mostrado importante e significativa em aplicações como o mapeamento de solo e fronteiras; acompanhamento de áreas de desmatamento, queimadas e de produção agrícola. Para gerar re...

  2. Clasificación en tiempo real de materias primas mediante un sensor espectroscópico de imagen y técnicas lineales de procesado de datos

    García Allende, Pilar Beatriz; Conde Portilla, Olga María; Mirapeix Serrano, Jesús María; Cubillas de Cos, Ana María; López Higuera, José Miguel

    2007-01-01

    RESUMEN: En este artículo se presenta un nuevo método de procesado de imágenes hiperespectrales capturadas mediante un sensor espectroscópico de imagen. Basado en un algoritmo de clasificación lineal, permite mejorar las restricciones de tiempo real que planteaba un sistema de clasificación de materia prima diseñado previamente. El procesado de datos consta de dos bloques: compresión de características e interpretación de las mismas. La compresión se realiza empleando Análisis de Componentes ...

  3. Monitorización de deformaciones y temperaturas en la estructura de un túnel artificial de alta velocidad mediante sensores ópticos puntuales, de longitud y distribuidos

    Torres, B.

    2015-06-01

    Full Text Available Structural Health Monitoring (SHM is presently having a great development. Strains and temperatures are usually the key parameters to be monitored due to their relevance when explaining structural behavior. Several types of sensors are used in SHM, but fiber optic sensors are especially interesting due to their advantages with respect to conventional sensors. In this paper, the monitoring of a high-speed train tunnel recently built in Spain using three types of fiber optic sensors developed by the authors is shown. Results given by the sensors are compared to those provided by a theoretical model built using FEM. Comparison of measurements and theoretical results confirms that the sensors reproduced remarkably well the general patterns of the tunnel structural behavior, even when strains are relatively small (around 5 με. Finally, the paper discusses the behavior of the sensors, their measurements and their field of application which is useful for researchers and practitioners.La monitorización de estructuras es una rama de la ingeniería estructural que está captando mucha atención actualmente. Las deformaciones y temperaturas son, habitualmente, los parámetros monitorizados porque son los que mejor representan el comportamiento estructural. De todos los tipos de sensores existentes, los basados en fibra óptica resultan especialmente interesantes debido a sus ventajas comparativas sobre los sensores convencionales. En este artículo se presentan los trabajos de monitorización de la estructura de un túnel artificial de Alta Velocidad construido en Mogente (España mediante tres tipos de sensores ópticos desarrollados por los autores. Los resultados de los sensores se comparan con los proporcionados por un modelo teórico de elementos finitos. Esta comparación confirma que los sensores reproducen notablemente bien la pauta general de comportamiento de la estructura, incluso con pequeños niveles de deformación (5με. Por último, el

  4. Diseño de Laboratorios Virtuales y/o Remotos. Un Caso Práctico

    J.M. Andújar Márquez

    2010-01-01

    Full Text Available Resumen: En este articulo se realiza un analisis sobre las formas de acceso a los recursos experimentales de un laboratorio universitario (presencial o remoto a traves de Internet, asi como de los propios elementos y/o sistemas para realizar los experimentos, los cuales pueden ser virtuales (simulados en un ordenador o fisicos tangibles (tradicionalmente usados en las practicas presenciales. A partir de aqui, se proponen unas pautas de diseno de laboratorios de acceso remoto con control de sistemas fisicos a traves de instrumentos virtuales. Como caso practico de aplicacion se presenta un proyecto educativo y de investigacion: el Laboratorio de Ensayo de Robots (LER, que dirigido a la ensenanza en Automatica, esta siendo llevado a cabo por profesores y alumnos de grado y posgrado de la Universidad de Huelva. Palabras clave: Educacion en Automatica, E-learning, Instrumento Remoto, Instrumento Virtual, Laboratorio Remoto, Laboratorio Virtual, Robotica

  5. SISTEMA DE MONITOREO AGRÍCOLA MEDIANTE REDES INALÁMBRICAS DE SENSORES PARA EL MONITOREO DE VARIABLES AMBIENTALES – SISMOAGRO

    Mayerly Ríos Marín

    2016-09-01

    Full Text Available En este artículo se presenta la implementación de una red inalámbrica de sensores que permite monitorear el comportamiento de variables ambientales, tales como la temperatura ambiente, humedad relativa y radiación solar, para cultivos agrícolas. Esta red está constituida por nodos sensores, los cuales realizaran las mediciones; estos están conectados a través del protocolo ZigBee (IEEE 802.15.4 con un nodo coordinador (estación base el cual haciendo uso de la tecnología GSM/GPRS (Global System for Mobile Communications / General Packet Radio Service envía la información recolectada por los nodos sensores hasta el servidor Web. El servidor gestiona el monitoreo de los sensores, los cuales son visibles en una aplicación Web, la cual permite mostrar la información capturada por la red de forma amigable y entendible al usuario final.

  6. Web-LABAI: Laboratorio Remoto de Automatización Industrial

    Francisco De La Cruz F.

    2010-01-01

    Full Text Available Resumen: Este trabajo presenta un laboratorio remoto que permite a los alumnos interactuar y realizar, desde Internet, prácticas de automatización y control de procesos. Se desarrolló un sistema Hardware-Software que permite monitorizar y controlar variables, remotamente desde una pagina Web, de la maqueta de un proceso industrial localizado en el Laboratorio de Automatización Industrial del Departamento de Ingeniería Electrónica de la Universidad Politécnica “Antonio José de Sucre”, UNEXPO, Barquisimeto, Venezuela. La interacción de un computador servidor, un Controlador Lógico Programable o PLC y una cámara IP permite el control y monitorización remota de una maqueta que simula un proceso de fabricación de alimentos. El software está constituido por una aplicación Servidor y una aplicación Cliente. La primera contiene un Servidor Modbus TCP/IP, embebido en el PLC, y un Servidor Web, que aloja una página Web a través de la cual los usuarios accederán al laboratorio remoto. La aplicación Cliente se compone de un conjunto de applets de JAVA que permite controlar y monitorizar el sistema, y además visualizar el proceso en tiempo real a través de la cámara IP. Palabras clave: Automatización, Laboratorio Remoto, Controlador Lógico Programable, Control en Tiempo Real, Ayudas educativas

  7. Sistema de detección de fugas en tiempo real en presas de materiales sueltos mediante sensores distribuidos en fibra óptica

    O. Muñoz

    2016-04-01

    Full Text Available El presente trabajo pretende analizar el uso de fibra óptica como sensor de temperatura distribuido para la detección de posibles fugas en presas de materiales sueltos. El uso de esta técnica permite complementar los sistemas de auscultación  normalmente utilizados mejorando la monitorización de las zonas críticas de la infraestructura. Este tipo de sistema de monitorización en tiempo real ha sido implementado en dos casos reales, (presa de Soto-Terroba y recrecimiento de la presa de Yesa. Finalmente este trabajo quiere proporcionar una visión práctica sobre esta nueva técnica implementada y en particular sobre los criterios de selección de materiales y las precauciones necesarias a la hora del despliegue del elemento sensor.

  8. ANÁLISIS DE LOS SECRETOS COMPARTIDOS PARA LA AUTENTICACIÓN DE NODOS EN LAS WIRELESS SENSOR NETWORKS MEDIANTE EL ALGORITMO DE SHAMIR

    Miguel Alfredo Acedo Arias

    2008-01-01

    Full Text Available Una nueva generación de redes está naciendo a partir de la evolución de dispositivos móviles de comunicación y de la convergencia de las diferentes tecnologías de redes en Internet. Estas son las denominadas redes Ad hoc, cuyas características imponen retos en el enrutamiento, administración eficiente de energía, seguridad, aplicaciones y estandarización. Las WSN (Wireless Sensor Network son una clase especial de redes Ad hoc, en las que se manejan poblaciones numerosas de dispositivos sensores, describiendo topologías en malla dinámicas. Estas redes igual que Internet son objeto de múltiples ataques de suplantación de identidad realizados por usuarios maliciosos que persiguen objetivos diversos. En este artículo se presenta un protocolo de autenticación de nodos basado en el esquema de secretos compartidos de Shamir para una red de WSN con una población alta de nodos.

  9. UTILIZACIÓN DE SENSORES REMOTOS PARA EL ESTUDIO DE UN ECOSISTEMA LACUSTRE

    Marisa Cogliati

    2006-12-01

    Full Text Available La distribución de sustancias disueltas, nutrientes, microorganismos y plancton es influenciada por la circulación del agua en los lagos, por lo que el adecuado conocimiento de los movimientos del agua adquiere importancia en la caracterización de ecosistemas lacustres ya que además, inciden en la distribución del calor entre las distintas capas del lago. Una de las características más importantes del lago es su estructura térmica. El contenido de calor del cuerpo de agua es de vital importancia en los estudios de la calidad de agua en lagos. El metabolismo y el comportamiento de los organismos acuáticos están directamente relacionados con la temperatura del agua.

  10. Los docentes investigadores de la Facultad de Filosofía y Humanidades de la Universidad Nacional de Córdoba como usuarios remotos de bibliotecas universitarias The Teacher Researchers Belong to the Facultad de Filosofía y Humanidades of the Universidad Nacional de Córdoba as Remote Users of the University Libraries

    María Carmen Ladrón de Guevara

    2012-06-01

    Full Text Available Se presentan los resultados de la investigación "Los docentes investigadores de la Facultad de Filosofía y Humanidades (FFyH de la Universidad Nacional de Córdoba (UNC como usuarios remotos de bibliotecas universitarias". La misma tuvo como objetivos conocer si los docentes investigadores de la FFyH son usuarios remotos de las bibliotecas universitarias e identificar sus hábitos y conductas en relación con el uso de la Web, lo que ayudará a construir un perfil de esta tipología de usuarios para poder satisfacer sus necesidades de información. Mediante el análisis de los datos obtenidos, se pudo reconocer la situación de los docentes investigadores de la Facultad en cuanto a la integración y apropiación que han tenido de Internet por medio de diferentes herramientas y servicios remotos brindados, especialmente por la biblioteca de la FFyH.The results of the research "The teacher researchers belong to the Facultad de Filosofía y Humanidades (FFyH of the Universidad Nacional de Cordoba (UNC as remote users of the university libraries" are outlined. The aims of the research are to know if the PHS teacher researchers are remote users of the university libraries and to identify their habits and behaviors related to the use of the Web. This research will allow building a user profile in order to satisfy their information needs. The analysis of the information obtained revealed the teacher researchers situation about their integration and appropriation of the Internet, especially those remote tools and services offered by the PHS library.

  11. Acceso remoto seguro a cuentas de usuario utilizando plataformas de virtualización

    Walter Fuertes, Maritza Enríquez y Diego Veloz

    2011-05-01

    Full Text Available En  las  universidades  persiste  el  problema  de  la subutilización de recursos tecnológicos; sin embargo, sesigue  incurriendo en gastos por adquisición de servidores,hardware  y  software. Frente  a  este  escenario,  en  laindustria se han venido desarrollando las tecnologías devirtualización, que ahorran energía y costos de inversiónde hardware. En  consecuencia,  el  artículo propone  elacceso remoto seguro a cuentas de usuario en un servidoruniversitario  virtualizado;  para  llevarlo  a  cabo  sediseñaron  e  implementaron  varias  topologías  deexperimentación, utilizando Virtual Box 3.1.3 y VMwareServer 2.0.2,  y  se  evaluaron diversas  tecnologías  deconexiones remotas seguras, bajo  idénticas condicionesy parámetros de  comprobación. En  cada  topología  seevaluó el rendimiento del servidor, el performance y  laseguridad  de  la  red  en  producción. Los  resultadosmuestran  la  funcionalidad  de  este  proyecto  deinvestigación  que  facilita  el  acceso  remoto  seguro deusuarios a los recursos informáticos universitarios.

  12. Laboratorio remoto para la enseñanza de la programación de un robot industrial

    Carlos Ariza L.

    2011-06-01

    Full Text Available El presente artículo describe la evolución del desarrollo y funcionamiento de un laboratorio remoto para la enseñanza de la automatización. Por medio de una aplicación Web, un software de acceso remoto que permite una conexión multiusuario independiente y archivos que contienen código con comandos del símbolo del sistema. Con esto se logra administrar el laboratorio evitando conflictos de uso entre los usuarios. Con este desarrollo se busca incrementar el tiempo de productividad y eliminar las restricciones de espacio y tiempo para la utilización de un robot manipulador de tipo industrial.

  13. Recuperación de la biomasa mediante la sucesión secundaria, Cordillera Central de los Andes, Colombia

    Jorge Ignacio del Valle

    2011-09-01

    Full Text Available En bosques secundarios premontanos tropicales es escasa la información sobre el tiempo requerido para recuperar la biomasa aérea y subterránea de los primarios. Por lo tanto, establecimos 33 parcelas de 0.1ha entre 550 y 1 700m en bosques secundarios que cubrían estadios serales de 3 a 36 años y estimamos la biomasa de las plantas y de las raíces gruesas con ecuaciones locales. Así como la biomasa de las pasturas y barbechos por cosecha de 54 y 18 parcelas, respectivamente. También se calculó la edad de las parcelas con informantes locales, sensores remotos, C14 y anillos de crecimiento. En cada parcela medimos la biomasa aérea viva por hectárea (Bav y la de las raíces gruesas por hectárea (Brg. Modelamos la Bav y Brg en función de la edad mediante la ecuación de von Bertalanfy con asíntotas de 247t/ha (Bav y 66t/ha (Brg resultantes de la medición de 33 parcelas de 0.1ha en los bosques primarios. Con la razón Brg/Bav=f(t estimamos 87 años para que los bosques secundarios recuperen la Bav existente en los primarios y 217 años para recuperar la Brg. La tasa máxima de crecimiento instantáneo de la Bav fue 6.95t/ha/año a los 10 años y la tasa media máxima de crecimiento 6.26t/ha/año a los 17 años. La media ponderada de la tasa de crecimiento absoluto de la Bav alcanzó 4.57t/ha/año y la relativa 10% anual. La razón Brg/Bav inicialmente aumenta muy aceleradamente hasta 4-5 años (25%, luego disminuye hasta 25 años (18% para luego incrementar hasta 26.7

  14. Sensors

    Pigorsch, Enrico

    1997-01-01

    This is the 5th edition of the Metra Martech Directory "EUROPEAN CENTRES OF EXPERTISE - SENSORS." The entries represent a survey of European sensors development. The new edition contains 425 detailed profiles of companies and research institutions in 22 countries. This is reflected in the diversity of sensors development programmes described, from sensors for physical parameters to biosensors and intelligent sensor systems. We do not claim that all European organisations developing sensors are included, but this is a good cross section from an invited list of participants. If you see gaps or omissions, or would like your organisation to be included, please send details. The data base invites the formation of effective joint ventures by identifying and providing access to specific areas in which organisations offer collaboration. This issue is recognised to be of great importance and most entrants include details of collaboration offered and sought. We hope the directory on Sensors will help you to find the ri...

  15. Sensors

    Jensen, H. [PBI-Dansensor A/S (Denmark); Toft Soerensen, O. [Risoe National Lab., Materials Research Dept. (Denmark)

    1999-10-01

    A new type of ceramic oxygen sensors based on semiconducting oxides was developed in this project. The advantage of these sensors compared to standard ZrO{sub 2} sensors is that they do not require a reference gas and that they can be produced in small sizes. The sensor design and the techniques developed for production of these sensors are judged suitable by the participating industry for a niche production of a new generation of oxygen sensors. Materials research on new oxygen ion conducting conductors both for applications in oxygen sensors and in fuel was also performed in this project and finally a new process was developed for fabrication of ceramic tubes by dip-coating. (EHS)

  16. Micromecanizado mediante láseres de femtosegundos de cerámicas LTCC. Fabricación de microcalentadores para un sensor de monóxido de carbono

    Gómez, David

    2007-08-01

    Full Text Available In present work, the processability of LTCC (Low Temperature Co-fired Ceramics by means of femtosecond laser ablation is shown. This kind of material, with a clear technological interest in the development of microsensors, possesses a high mechanical fragility in the sintered state and, consequently, contact methods for micromaching (micromilling, microgrinding, etc. lead to fracture or the appearance of microcracks. The paper has been structured in two different parts. Firstly, a detailed study of the process has been performed, obtaining the fundamental parameters, as ablation threshold and incubation factor and a parametrization of width and height of microchannels as a function of fluence and feedrate. Afterwards, these results have allowed the fabrication of simple structures as boxes, passing-through holes and 21/2D structures. Finally, the technological interest of the material and the process is shown. This way, microheaters in LTCC have been fabricated as initial stage of a carbon monoxide chemoresistive sensor. The system allows the heating of a 1mm x 1mm area up to 490ºC with almost no heat dissipation to the surrounding area.

    El presente trabajo pretende mostrar la procesabilidad de cerámicas de baja temperatura de sinterizado, LTCC (Low Temperature Co-fired Ceramics mediante ablación láser con pulsos ultracortos (femtosegundos. Este tipo de material, de indudable interés tecnológico en el desarrollo de microsensores, presenta una alta fragilidad en el estado sinterizado, por lo que la utilización de métodos de contacto (fresado, torneado, etc. para su mecanizado conduce a la fractura o la aparición de microgrietas y desconchamientos. El trabajo ha sido dividido en dos partes bien diferenciadas. Primeramente, se ha realizado un estudio del proceso, obteniéndose los parámetros fundamentales (el umbral de ablación y el coeficiente de incubación y se ha procedido a una parametrización de la anchura y altura de

  17. Arquitectura de un laboratorio remoto desde el enfoque de la formación de ingenieros en ead

    Harold Esneider Pérez Waltero

    2015-10-01

    Full Text Available La Educación Abierta y a Distancia, EaD, soportada en las Tecnologías de la Información y la Comunicación TIC, se proyecta como una de las mejores alternativas para responder de manera pertinente al nuevo contexto de globalización, en procura de generar una sociedad incluyente, desarrollada y competitiva. Sin embargo, es necesario avanzar en el desarrollo de recursos tecnológicos que permitan garantizar procesos formativos de calidad a nivel de Ingeniería bajo esta modalidad, dado que aún persistencuestionamientos al respecto. Son varios los aspectos que se pueden abordar para evidenciar la calidad con la que se puede desarrollar un proceso de formación soportado en las Tecnología de la Informacióny la Comunicación, TIC. Uno de los aspectos estructurales en el proceso formativo de ingenieros en esta metodología, es la práctica de laboratorio; desde esta perspectiva se plantea un escenario real de práctica,aunque remoto, denominado Laboratorio de Acceso Remoto o Laboratorio Remoto (LR. En este sentido, lo que se plantea es el diseño de una arquitectura a nivel de ingeniería para LR, que elimine la barrera de espacio y tiempo, reduzca costos en infraestructura y tenga un mayor grado de universalidad en el acceso, sin sacrificar la calidad que demanda el ejercicio riguroso de la práctica de laboratorios en la formación del Ingeniero.

  18. plataforma cloud computing como infraestructura tecnológica para laboratorios virtuales, remotos y adaptativos

    Frey Alfonso Santamaría Buitrago,

    2016-01-01

    RESUMO Hoje em dia, as instituições de ensino superior estão a desenvolver processo de ensino apoiado em campus virtual, em sala de aula e blended learning; bem como a internacionalização do ensino cria novos desafios, tais como: a criação de redes de investigação, espaços de trabalho compartilhados, laboratórios virtuais e remotos, entre outros; apostando em sistemas de produção, publicação e distribuição de conteúdos digitais educativos que permitem a partilha de conhecimentos e material educativo. Esta proposta pretende potenciar o desenvolvimento de ecossistemas experimentação acadêmicos abertos, reutilizáveis e interoperáveis, através da concepção de um quadro ea integração tecnológica orientada para a implementação de laboratórios virtuais operados e tele, com base em IMS Learning Tools Interoperability ® (LTI® padrão . Isso, combinado com a caracterização de um conjunto de métodos e tecnologias aplicáveis ao desenvolvimento de laboratórios operados virtuais e tele, identificando o seu âmbito e critérios técnicos, a fim de oferecer serviços de informática em ambientes acadêmicos através da Internet e que permite uma alta escalabilidade e flexibilidade na modificar o dimensionamento do serviço, pesquisa acadêmica e científica, apoiada em padrões abertos, arquiteturas, tecnologias, ferramentas e aplicativos.

  19. Gestión del acceso remoto a kits de laboratorio de prácticas CISCO

    Domínguez Parrón, Borja

    2016-01-01

    El presente trabajo está enfocado a facilitar la realización de prácticas con equipamiento de laboratorio físico en remoto, gestionando el acceso a los diferentes equipos de forma exclusiva para un alumno o grupo de alumnos. Este trabajo pretende contribuir a la realización de prácticas por parte de los alumnos, ofreciéndoles la posibilidad de realizar prácticas con equipamiento real, pero eliminando las dificultades inherentes al acceso físico a dicho laboratorio. La Escuela dispone de do...

  20. DESARROLLO DE PROTOTIPO DE MÁQUINA INTELIGENTE DE FERTIRIEGO DE CONTROL REMOTO Y BAJO COSTO EN LA REGIÓN LAMBAYEQUE

    Ramírez Lora, Víctor; RITEC Riegos Tecnificados, Chiclayo, Perú; Fuentes Alcántara, Antonio Junior; RITEC Riegos Tecnificados, Chiclayo, Perú; Fuentes Alcántara, Susana Elizabeth; RITEC Riegos Tecnificados, Chiclayo, Perú

    2016-01-01

    El prototipo de máquina inteligente de fertiriego de control remoto y bajo costo desarrollado por la empresa RITEC Riegos Tecnificados E.I.R.L. optimiza el proceso de control y monitoreo remoto de inyección de nutrientes y ácidos en un sistema de riego tecnificado. El desarrollo de este prototipo identificó oportunidades y limitaciones en la confección de productos de alta tecnología para el sector agrícola en la región Lambayeque. El prototipo está compuesto de un hardware electrónico de baj...

  1. Sensor

    Gleeson, Helen; Dierking, Ingo; Grieve, Bruce; Woodyatt, Christopher; Brimicombe, Paul

    2015-01-01

    An electrical temperature sensor (10) comprises a liquid crystalline material (12). First and second electrically conductive contacts (14), (16), having a spaced relationship there between, contact the liquid crystalline material (12). An electric property measuring device is electrically connected to the first and second contacts (14), (16) and is arranged to measure an electric property of the liquid crystalline material (12). The liquid crystalline material (12) has a transition temperatur...

  2. Pizarra Virtual Compartida Websockets; una solución para trabajo remoto colaborativo

    Xavier Sotomayor

    2017-02-01

    Full Text Available La Pizarra Virtual Compartida Websockets, PVCW, es un sistema para trabajo compartido que habilita a sus usuarios a colaborar de manera remota, en línea y en tiempo real. El sistema proporciona una pizarra virtual que actúa como un espacio de trabajo en el cual las interacciones de cualquier participante se sincronizan automática e inmediatamente con los demás. En el lado servidor el sistema se implementa mediante la Java Enterprise Edition utilizando la tecnología WebSockets. En el lado cliente no es necesario efectuar ninguno tipo de instalación dado que cualquier browser de nueva generación que soporte WebSockets mediante Javascript, sea en dispositivos de escritorio o móviles, es capaz de integrarse a una sesión de trabajo. Esta configuración permite a los usuarios, dibujar a mano alzada, utilizar figuras geométricas de base y cuadros de texto; pueden guardar una pizarra, cargarla nuevamente en cualquier momento y editar su contenido; adicionalmente se habilita una herramienta de chat que brinda un espacio complementario para añadir explicaciones contextuales a la sesión, todo en un entorno colaborativo.

  3. Sensoriamento remoto da vegetação: evolução e estado-da-arte = Remote sensing of vegetation: evolution and state of the art

    Laerte Guimarães Ferreira

    2008-10-01

    Full Text Available Levantamentos sistemáticos da cobertura vegetal no Brasil, à escala desemidetalhe, incluem aqueles realizados no âmbito dos projetos Radam e Radambrasil, no período de 1971 a 1977, tendo por base imagens de radar aerotransportadas e, mais recentemente, os mapeamentos, com base em imagens Landsat 7 ETM+, dos remanescentes da cobertura vegetal nos biomas brasileiros (projeto MMA/PROBIO, concluídos em 2006. Nestes pouco mais de 30 anos, muitas mudanças ocorreram, tanto na cobertura vegetal do país quanto no sensoriamento remoto orbital. Neste artigo de revisão, apresentamos, do ponto de vista conceitual e tecnológico, a evolução e o estado-da-arte dos sistemas sensorese discutimos algumas das técnicas mais utilizadas para decodificar (ex. em parâmetros biofísicos etc. e classificar a resposta espectral da vegetação. Da mesma forma, apresentamos as principais iniciativas, históricas ou em curso, voltadas ao monitoramento da cobertura vegetal dos biomas brasileiros.Systematic surveys of the vegetative cover in Brazil include the semi-detailed mappings conducted within the scope of the Radam and Radambrasil projects, between 1971 and 1977, based on side-looking airborne radar images, and more recently, the assessments, based on Landsat 7 ETM+ imagery, of the remnant vegetation cover of the Brazilian biomes (MMA/PROBIO, finished in 2006. In a little more than 30 years, many changes have occurred, both in vegetation cover as well as in orbital remote sensing. In this review article,we discuss, from a conceptual and technological perspective, the evolution and the state of the art of imager sensors, as well as some of the enhancement techniques utilized for decoding (e.g., in biophysical parameters, etc. and classifying the spectral response ofvegetation. Likewise, we present the main current (pioneering initiatives for land cover monitoring of the Brazilian biomes.

  4. Operación de un PLC Mediante un PDA Vía ZIGBEE

    Juan Zuluaga-Botero

    2015-07-01

    Full Text Available En este artículo se muestra la parte preliminar de interconexión de un módulo ZigBee con un Asistente Digital Personal (PDA a través de la red del Sistema de telefonía Móvil Global (GSM, para aplicación futura de comunicación con un Controlador Lógico Programable (PLC. Esta aplicación permite realizar monitoreo y control del sistema, de manera remota y con dispositivos móviles siendo el alcance del proyecto de investigación. Para este proyecto inicialmente se realizan comunicaciones que permiten empalmar las tecnologías de las redes de telefonía móvil celular con la red ZigBee, haciendo una interfaz transparente para el usuario, presentando dichos resultados en este artículo. Para esto se trabaja con tramas de datos básicas a través de la red de telefonía móvil celular, mediante mensajería corta recibida por el puerto serial del Zigbee remoto, utilizando microcontroladores para el control de los módulos que conforman esta parte del sistema de comunicación, estableciendo la interfaz con el dispositivo móvil o Smartphone vía Zigbee.

  5. CONSTRUÇÃO DE SÉRIES TEMPORAIS DE EVAPOTRANSPIRAÇÃO REAL POR SENSORIAMENTO REMOTO USANDO REGRESSÃO LINEAR: ESTUDO DE CASO NA BACIA DO RIO PRETO –DF

    Morris Scherer Warren

    2012-10-01

    Full Text Available Estimativas remotas de evapotranspiração real têm sido utilizadas no monitoramento do balanço hídrico de bacias hidrográficas. Diferentes métodos têm sido empregados para a estimativa da evapotranspiração por sensoriamento remoto, incluindo métodos de bases físicas que utilizam a equação de balanço de energia. Mas o processamento da equação de balanço de energia é complexo e operacionalmente não eficiente. O objetivo do presente artigo é apresentar um procedimento que utiliza regressão linear para estimar a evapotranspiração real em diferentes imagens do sensor Moderate Resolution Imaging Spectroradiometer (MODIS, tornando mais ágil a construção de uma série temporal de evapotranspiração. A utilização de regressão linear, conjuntamente com o emprego da equação de balanço de energia em uma imagem de referência, se mostrou um procedimento viável, com erro máximo de 6% em todas as imagens analisadas.

  6. Estudio del efecto térmico de espacios verdes urbanos del árido con sensores remotos

    Alejandra Kurbán

    2015-12-01

    Full Text Available Se estudia el efecto térmico estacional de los espacios verdes urbanos en una ciudad de zona árida (San Juan, Argentina, a través del procesamiento de imágenes satelitales multiespectrales tipo LANDSAT 5 TM+ correspondientes al año 2011. La temperatura del aire se obtiene con el método TvX a partir de un muestreo amplio de relaciones entre el índice normalizado de vegetación NDVI y la temperatura de superficie. Los datos térmicos se combinan con registros de una estación meteorológica ubicada en el centro de la ciudad. Se cuantifican dichos datos y se relacionan con las bandas urbanas características de la ciudad y la isla de calor estacional, esta última obtenida del procesamiento de las mismas imágenes satelitales de 2011. Los resultados convalidan y amplían los conseguidos a partir de un previo trabajo de campo in situ, respecto al efecto bioclimático de los espacios verdes en sus ambientes urbanos áridos. Se verifica, finalmente, la eficiencia del uso de la teledetección para estudios urbanos, cuyos alcances puedan aplicarse al diseño urbano bioclimático.

  7. Administración de sensores remotos a través de microServidores Web

    Caballero, Raúl M.; Loyarte, Horacio; Maggiolo, Gustavo Daniel; Pfarher, Iván; Reula, Germán

    2006-01-01

    Las tecnologías de la información y las comunicaciones han avanzado en forma notable en los últimos tiempos, siendo el paradigma de Internet el emblema de este desarrollo. Es posible hoy operar dispositivos a distancia en base a las tecnologías integradas de la electrónica, Internet y la ingeniería de software. Estas nuevas tecnologías permiten en nuestros días pensar en operaciones remotas de instrumentos y dispositivos utilizados en medicina, control de procesos, sensado de variables ambien...

  8. Utilização de sensoriamento remoto em análises de albedo e temperatura de superfície em Londrina - PR: contribuições para estudos de ilha de calor urbana

    Nancy Laura Rios Gamarra

    2014-12-01

    Full Text Available Este trabalho avaliou o albedo (αs e a temperatura de superfície continental (Tsup provenientes de sensoriamento remoto, e a temperatura do ar (Tar medida in situ no intuito de caracterizar a Ilha de Calor Urbana (ICU na cidade de Londrina (Paraná. Foram utilizados dados de αs e Tsup obtidos do sensor MODIS, e medições in situ de Tar realizadas entre junho e agosto de 2011 por sensores meteorológicos instalados em 13 locais na cidade. Os dados de αs e Tsup foram utilizados para calcular um índice de urbanização (IU na região e posteriormente comparado com Tar. A análise dos dados de αs e Tsup foi consistente com as medições in situ, evidenciando sua aplicabilidade na avaliação espaço-temporal de fenômenos acoplados continente-atmosfera, tais como a ICU. A mancha urbana da cidade de Londrina apresentou valores de IU compreendido entre 18 e 20, bem maiores que as áreas mais vegetadas (14 - 16. Nesse sentido, o IU demonstrou-se ser uma metodologia útil para representar a evolução espaço-temporal de áreas urbanas, o que pode propiciar uma avaliação detalhada do impacto da mudança de cobertura de solo no clima local e regional. Além disso, os resultados indicam que dados obtidos via satélite podem auxiliar grandemente na quantificação da ICU, quando dados in situ estiverem indisponíveis.

  9. Remote Control of TJ-II Diagnostics; Control Remoto de Diagnosticos del Dispositivo TJ-II

    Lopez Sanchez, A.; Vega, J.; Montoro, A.; Encabo, J.

    2001-07-01

    The present paper is about the design and development of ten remote control diagnostic systems used in the study of plasma fusion in the TJ-II device installed at CIEMAT. This development goes from the definition of sensors and devices necessary in carrying out these remote controls, to its assembly, wiring, development of electronic circuits inserted between sensors and PLC, development of programs for these PLC, connections and administration of the real time automation network, and later development of the necessary programs via the appropriate software tools for web access through a navigator to a specific web page, allowing visual and real time access over the auxiliary systems that make up all the diagnostics. (Author)

  10. Validación de requisitos funcionales de un Laboratorio Virtual Remoto como apoyo al blended learning

    Javier Gamo Aranda

    2015-01-01

    Full Text Available Esta investigación analiza los requisitos detectados entre estudiantes y profesores de enseñanzas científico-técnicas, sobre el diseño y funcionalidad de una futura plataforma web que implemente un Laboratorio Virtual Remoto (VRL. El VRL actualmente está en fase de diseño, y pretende servir como complemento a la enseñanza experimental en el laboratorio presencial, en las áreas de Óptica y Fotónica. A tal fin, se han diseñado dos cuestionarios (para profesores y estudiantes, respectivamente, con el fin de recabar las necesidades y expectativas de ambos colectivos, en el uso y contenidos de la plataforma virtual. Los cuestionarios se han editado en inglés y español , su contenido ha sido validado previamente por expertos nacionales e internacionales en ciencias, ingeniería y educación, y se han distribuido en línea entre estudiantes y profesores de universidades españolas y extranjeras. El trabajo detalla la estructura de los cuestionarios, la valoración de los expertos sobre su contenido, el análisis de fiabilidad realizado, los resultados obtenidos en la cumplimentación por profesores y estudiantes, y la discusión de dichos resultados, realizada con la ayuda de un grupo de expertos.

  11. Sensoriamento remoto multifonte aplicado na detecção do fitoplâncton em águas interiores

    Rejane E. Cicerelli

    2015-03-01

    Full Text Available Florações de fitoplanctôn podem constituir em riscos à saúde humana e biota aquática, sendo necessários o monitoramento da comunidade fitoplanctônica e a adoção de mecanismos visando à prevenção de sua ocorrência. Neste contexto métodos tradicionais de monitoramento podem ser mais efetivos se complementados por abordagens que utilizam as propriedades ópticas dos pigmentos fitoplanctônicos por meio do Sensoriamento Remoto. Com o objetivo de avaliar o potencial de dados espectrais multifonte na detecção remota do fitoplâncton, foi selecionada uma área de estudo no reservatório de Nova Avanhandava, SP, caracterizada por intensa atividade agrícola no seu entorno. Para esta análise foram adquiridos dados hiperespectrais em campo e imagens multiespectrais Modis e RapidEye, os quais foram relacionados a variáveis limnológicas indicadoras do comportamento fitoplanctônico; clorofila a e ficocianina. Os resultados mostram que imagens multiespectrais permitem uma avaliação da biomassa fitoplanctônica pela clorofila a; contudo, para ficocianina, pigmento fitoplanctônico diagnóstico da presença de cianobactérias, dados mais refinados são necessários, tais como os hiperespectrais.

  12. Estimativa do balanço de radiação por sensoriamento remoto de diferentes ssos de solo so sudoeste da Amazônia Brasileira / Estimative of radiation balance by remote sensing of different soil uses in the brazilian southern amazon

    Luiz Carlos da Silva

    2016-09-01

    Full Text Available Mudanças no uso do solo têm motivado pesquisas sobre a dinâmica de trocas radiativas e energéticas na Amazônia Brasileira que, por sua vez, geram demanda destas informações de superfície em escalas espaciais e temporais. Enquanto a medição destas trocas em torres micrometeorológicas fornece resultados pontuais, o sensoriamento remoto apresenta resultados acurados e de baixo custo para estimá-las em escala regional. Este estudo objetivou avaliar a distribuição espacial e temporal de estimativas de saldo de radiação e parâmetros biofísicos por sensoriamento remoto de diferentes usos do solo no sudoeste da Amazônia Brasileira. Foram selecionadas 04 áreas de solo coberto por floresta amazônica natural, floresta amazônica manejada, sistema silvipastoril e pastagem. O saldo de radiação, NDVI, índice de área foliar, albedo e temperatura radiométrica foram estimados pelo algoritmo SEBAL, usando imagens do sensor TM do satélite Landsat 5 em julho de 2009, 2010 e 2011. O NDVI, IAF, albedo e saldo de radiação apresentaram maiores valores na floresta natural, seguida por floresta manejada, sistema silvipastoril e pastagem. A temperatura radiométrica da superfície apresentou maiores valores para o sistema silvipastoril seguido por pastagem, floresta natural e floresta manejada.

  13. MÉTODOS DE SENSORIAMENTO REMOTO APLICADOS À GEOMORFOLOGIA - METHODS IN REMOTESENSING APPLY IN GEOMORPHOLOGY

    Thiago Morato de Carvalho

    2007-12-01

    Full Text Available The mean of this papper is to present the methodology used by SRTM products, like an essential tool toproducts in geomorphology. The mapping of Goiás State and Brasília D.C. from SIEG-GOIAS was usedlike example. The SRTM products were obtained by sensor SIR-C/X-SAR (Spaceborn Imaging RadarC-band/X-band Synthetic Aperture Radar on board of Endeavour space shuttle, during 2000, to mappingthe relief topography just the 80º. N an S parallels. The results showed which the SRTM images have agood utility to geomorphologic mappings in small and middle scales, like this application in the Goiás state,Brazil.

  14. Monitorización de la Condición Física de Personas en Espacios Confinados Mediante Etiquetas RFID con Sensores y Redes Inalámbricas Eficientes

    Javier G. -Escribano

    2011-10-01

    Full Text Available Resumen: La situación y la condición física de los trabajadores que realizan su labor en el interior de ciertos espacios confinados o peligrosos es una información muy importante. Las empresas de seguridad laboral consideran crucial obtener tal información para poder observar y determinar los riesgos potenciales a los que el personal puede estar sometido. Los sistemas que se han venido utilizando no incluyen en la mayoría de los casos la monitorización personalizada de cada individuo. En este trabajo se ha diseñado un sistema basado en “Wireless Sensor Networks” energéticamente eficientes y RFID para conseguir el posicionamiento y la monitorización de personas que trabajan en el interior de espacios confinados potencialmente peligrosos. El sistema diseñado es capaz de identificar a cada trabajador, localizarlo y enviar datos relativos a su situación física tanto si éste se encuentra en un espacio libre como cerrado. Además, en situaciones de emergencia como caídas libres o pérdidas del conocimiento, el sistema envía una alarma. Los resultados demuestran que la utilización de este sistema permite conocer en tiempo real, y de forma energéticamente eficiente, la posición de cada trabajador, y analizar el riesgo potencial al que el mismo se expone en cada momento. Al mismo tiempo, en caso de emergencia, el sistema permite una mayor rapidez en la intervención ya que por un lado, se sabe dónde y porqué se ha producido la alarma; y por otro, se conocen las condiciones físicas del trabajador en ese momento. Palabras clave: Acelerómetros, Sistemas de Emergencia, Control Automático, Redes, Ingeniería de Sistemas, Algoritmos de Enrutamiento, Transceptores, Telecomunicaciones

  15. Análisis y monitoreo remoto de las variables ambientales en un entorno indoor, por medio de un dispositivo móvil con android

    Diego Felipe Prieto Morales

    2015-10-01

    Full Text Available La implementación de técnicas de automatización en el desarrollo de actividades en la vida cotidiana, ha permitido elaborar sistemas orientados a mejorar el confort en el interior de las estructuras habitadas por personas, permitiendo estudiar variables ambientales como la temperatura, humedad e intensidad de luz. Entre las temáticas con mayor interés en investigación, se encuentra la domótica, la cual integra la necesidad de proporcionar seguridad, gestión energética y bienestar en el mismo. En el presente artículo, se expone los resultados obtenidos del análisis y control remoto de las variables ambientales en el interior de un prototipo de un apartamento. Los resultados obtenidos se orientaron a mejorar las condiciones de hospedaje y seguridad, en entornos cotidianos de la población urbana y de este modo realizar un monitoreo remoto por medio de un dispositivo móvil con sistema operativo Android.

  16. ALGORITMOS DE APRENDIZAGEM DE MÁQUINA E VARIÁVEIS DE SENSORIAMENTO REMOTO PARA O MAPEAMENTO DA CAFEICULTURA

    Carolina Gusmão Souza

    Full Text Available A cafeicultura é uma das principais culturas agrícolas do Brasil e realizar o mapeamento e monitoramento desta cultura é fundamental para conhecer sua distribuição espacial. Porém, mapear estas áreas utilizando imagens de Sensoriamento Remoto não é uma tarefa fácil. Sendo assim, este trabalho foi realizado com o objetivo de comparar o uso de diferentes variáveis e algoritmos de classificação para o mapeamento de áreas cafeeiras. O trabalho foi desenvolvido em três áreas diferentes, que são bastante significativas na produção de café. Foram utilizados 5 algoritmos de aprendizagem de máquinas e 7 combinações de variáveis: espectrais, texturais e geométricas, associadas ao processo de classificação. Um total de 105 classificações foram realizadas, 35 classificações para cada uma das áreas. As classificações que não usaram variáveis espectrais não resultaram em bons índices de acurácia. Nas três áreas, o algoritmo que apresentou as melhores acurácias foi o Support vector machine, com acurácia global de 85,33% em Araguari, 87% em Carmo de Minas e 88,33% em Três Pontas. Os piores resultados foram encontrados com o algoritmo Random Forest em Araguari, com acurácia global de 76,66% e com o Naive Bayes em Carmo de Minas e Três Pontas, com 76% e 82% de acerto. Nas três áreas, variáveis texturais, quando associadas às espectrais, melhoraram a acurácia da classificação. O SVM apresentou o melhor desempenho para as três áreas

  17. USO DE FERRAMENTAS DA INTERNET NO ENSINO DO SENSORIAMENTO REMOTO NO CURSO DE GRADUAÇÃO EM ENGENHARIA AGRÍCOLA

    Edilberto Bezerra de Sousa

    Full Text Available RESUMO Esta pesquisa consistiu no desenvolvimento de uma metodologia de ensino, a partir da utilização de ferramentas da INTERNET, para a disciplina de Sensoriamento Remoto I, ministrada no DEAg (Departamento de Engenharia Agrícola da UFPB (Universidade Federal da Paraíba e está vinculada ao programa da UFPB para informatização de disciplinas dos cursos de Engenharia. Nesta metodologia são abordados todos os tópicos do seu programa. Na abordagem, apesar de ser dirigida aos cursos de Engenharia Agrícola, os temas básicos e aplicações são de interesse de diversos cursos de engenharia e áreas afins. A deficiência de material didático básico para dar suporte a tal disciplina é muito grande, principalmente nos cursos de Engenharia Agrícola, que tratam de um segmento específico relacionado aos Recursos Naturais, o que motivou a realização deste trabalho que, certamente, preencherá a lacuna de um material didático ilustrado e com várias aplicações na Engenharia Agrícola. Nesta pesquisa constatou-se que a utilização da informática nos seus mais diversos modos é uma experiência que, além de estimular e familiarizar o aluno ao uso de novas ferramentas de trabalho, permite formar um engenheiro melhor preparado para as novas necessidades do mercado de trabalho. Verificou-se ainda que a metodologia de ensino desenvolvida nesta pesquisa mostrou-se eficaz no aprendizado do conteúdo da disciplina Sensoriamento Remoto I, ministrada no curso de graduação em Engenharia Agrícola da UFPB.

  18. Monitorización de un lecho fluidizado mediante acelerometría

    Velasco Fernández, Mario

    2013-01-01

    El presente proyecto estudiará la posibilidad de monitorizar un reactor químico mediante sensores de vibración. Actualmente, no se realiza este tipo de monitorización sobre reactores químicos, y los estudios realizados al respecto son escasos. Se tratarán de establecer las posibles equivalencias entre las medidas realizadas con sensores de presión y de vibración. Para ello se realizará la monitorización de un modelo de reactor a escala, del laboratorio de la Universidad, utilizand...

  19. Recuperación de la biomasa mediante la sucesión secundaria, Cordillera Central de los Andes, Colombia

    Jorge Ignacio del Valle

    2011-09-01

    Full Text Available En bosques secundarios premontanos tropicales es escasa la información sobre el tiempo requerido para recuperar la biomasa aérea y subterránea de los primarios. Por lo tanto, establecimos 33 parcelas de 0.1ha entre 550 y 1 700m en bosques secundarios que cubrían estadios serales de 3 a 36 años y estimamos la biomasa de las plantas y de las raíces gruesas con ecuaciones locales. Así como la biomasa de las pasturas y barbechos por cosecha de 54 y 18 parcelas, respectivamente. También se calculó la edad de las parcelas con informantes locales, sensores remotos, C14 y anillos de crecimiento. En cada parcela medimos la biomasa aérea viva por hectárea (Bav y la de las raíces gruesas por hectárea (Brg. Modelamos la Bav y Brg en función de la edad mediante la ecuación de von Bertalanfy con asíntotas de 247t/ha (Bav y 66t/ha (Brg resultantes de la medición de 33 parcelas de 0.1ha en los bosques primarios. Con la razón Brg/Bav=f(t estimamos 87 años para que los bosques secundarios recuperen la Bav existente en los primarios y 217 años para recuperar la Brg. La tasa máxima de crecimiento instantáneo de la Bav fue 6.95t/ha/año a los 10 años y la tasa media máxima de crecimiento 6.26t/ha/año a los 17 años. La media ponderada de la tasa de crecimiento absoluto de la Bav alcanzó 4.57t/ha/año y la relativa 10% anual. La razón Brg/Bav inicialmente aumenta muy aceleradamente hasta 4-5 años (25%, luego disminuye hasta 25 años (18% para luego incrementar hasta 26.7Biomass recovery through secondary succession in the Cordillera Central de los Andes, Colombia. Estimations on biomass recovery rates by secondary tropical forests are needed to understand the complex tropical succession, and their importance on CO2 capture, to offset the warming of the planet. We conducted the study in the Porce River Canyon between 550 and 1 700m.a.s.l. covering tropical and premontane moist belts. We established 33 temporary plots of 50mx20m in secondary

  20. Sensoriamento remoto como subsídio à modelagem do balanço energético superficial

    Vassiliki Terezinha Galvão Boulomytis

    2010-09-01

    Full Text Available O balanço energético superficial interfere no funcionamento do sistema terrestre através da relação existente entre a água e a energia solar e do modo como ocorre o seu processo de partição. Para a sua estimativa, modelagens vêm sendo realizadas utilizando-se de um ou mais sensores com diferentes resoluções, a fim de se obter dados com resoluções temporal e espacial adequadas a uma escala local. Neste estudo serão apresentados modelos para estimar a evapotranspiração e outros parâmetros biofísicos através do balanço energético superficial com a utilização dos sensores MODIS e AMSR-E.

  1. APLICACIÓN DE SENSORES REMOTOS EN EL ANÁLISIS DE LA FRAGMENTACIÓN DEL PAISAJE EN CUCHILLAS DE LA ZARCA, MÉXICO

    Gerardo Daniel de León Mata

    2013-08-01

    Full Text Available Se analizó la estructura y composición del paisaje del Área Prioritaria para laConservación de Pastizales (APCP Cuchillas de la Zarca, determinando su afectación por los procesos de fragmentación. Se generó una clasificación supervisada y un análisis de fragmentación en el periodo del año 2008 al 2011. El análisis espectral permitió definir con claridad seis clases, donde el ecosistema mayormente representado es el de pastizal natural con un 41.6% del área total. El análisis de fragmentación de las métricas del paisaje generadas muestra un proceso gradual de fragmentación. Un aumento en el número de fragmentos totales en función del tiempo confirma el proceso de fragmentación en la zona, mientrasque para el tamaño medio de los parches se observa una disminución, lo que indica que los parches grandes fueron fragmentados o divididos. Aunado a lo anterior, los índices de Shannon y Simpson presentan una tendencia ascendente (0.66 a 0.89, (0.68 a 0.82, indicando el aumento de fragmentos en el tiempo.  La exactitud global de las clasificaciones evaluadas en el periodo 2008 – 2011 muestra una alta precisiónque fluctuó del 91 al 94%, mientras que el índice discreto multivariado Kappa presento una variación de 0.90 al 0.93.

  2. Sensado de variables mediante terminal Android

    Altaba Rosas, Mar

    2017-01-01

    El presente documento describe los procesos de diseño y desarrollo de un sistema que, a través de una aplicación móvil, sirve como dispositivo para el registro de la actividad cardíaca del paciente, mediante la obtención del electrocardiograma (ECG), y que permite detectar irregularidades para posteriormente, en caso que fuera necesario, poder enviar los datos adquiridos al profesional sanitario pertinente para que éste los analice. El sistema tiene dos componentes diferenciados, por un lado,...

  3. Reconciliando modularidad y eficiencia mediante atajos

    Marco Gómez, Jordi; Franch Gutiérrez, Javier

    1997-01-01

    Se presenta en este artículo una propuesta para el desarrollo de programas eficientes en el marco de la programación con tipos abstractos de datos (TAD), con el objetivo de respetar la estructura modular de los programas propia de este ámbito. La propuesta se centra en el concepto de atajo como camino eficiente de acceso a los datos, alternativo al acceso mediante las operaciones propias del TAD, y se desarrolla sobre un TAD concreto, el almacén de elementos. La definición de los atajos es al...

  4. Diagnóstico en linea de un motor de encendido provocado Hyundai Accent DOHC 1.5L mediante herramientas de aprendizaje y clasificación a través del análisis de la señal del sensor de oxígeno de banda corta

    Barreto Cajamarca, Christian Xavier; Zhunio Lituma, Luis Patricio

    2017-01-01

    En este trabajo se realizó un algoritmo de clasificación para un conjunto de fallas de un motor de combustión interna de encendido provocado, interviniendo en los sistemas de encendido y alimentación, esto se logró mediante el pretratamiento de los datos utilizando análisis de componentes principales y máquinas de soporte vectorial para el proceso de entrenamiento. Obteniendo resultados de precisión en la clasificación superiores a 90% en cada una de las clases. In this work, a classificat...

  5. Desarrollo de una aplicación iOS para el manejo remoto de un sistema de control

    Iglesias Arias, Jorge

    2015-01-01

    En los países desarrollados el Internet de las Cosas (IoT) ya es una realidad. El mundo físico y el digital cada vez están más unidos, gracias a la reducción del tamaño, el descenso del coste de los sensores, la posibilidad de disponer de una conexión a Internet en todo momento y al desarrollo de las aplicaciones, que ponen en uso la gran cantidad de información generada por todos los objetos conectados. Los campos de aplicación del IoT son muy variados, lo que otorga grandes oportunidades...

  6. Modelo de la geometría sol-sensor en la reflectancia de la vegetación: validación a nivel satelital.

    Medrano Ruedaflores, Edgardo Rafael

    2013-01-01

    Las observaciones de la superficie terrestre realizadas por sensores remotos a bordo de plataformas satelitales, pueden ser utilizadas para caracterizar los procesos que ocurren en el sistema suelo-vegetación-atmósfera. Los datos adquiridos desde distintos ángulos de observación son una fuente de información adicional a la ofrecida por las variaciones espectrales, espaciales y temporales detectadas por estos instrumentos. Una de las aplicaciones donde ha cobrado relevancia el uso de esta cuar...

  7. IDENTIFICAÇÃO DE ILHAS DE CALOR POR MEIO DE SENSORIAMENTO REMOTO: ESTUDO DE CASO NO MUNICÍPIO DE GOIÂNIA – GO/2001

    Diego Tarley Ferreira Nascimento

    2009-06-01

    Full Text Available No presente trabalho são utilizadas técnicas de sensoriamento remoto para identificação e análise do fenômeno de ilhas de calor em Goiânia-GO, tendo como recorte temporal o ano de 2001. Foi utilizada a proposta metodológica de Monteiro (1976, do Sistema de Clima Urbano – SCU, em particular o subsistema Termodinâmico, visando proceder a uma análise do funcionamento, desempenho e organização do fenômeno de ilhas de calor. A elaboração do trabalho baseou-se na classificação da cobertura do solo e em um mapeamento do campo térmico do município de Goiânia, por meio das imagens das bandas 3, 4, 5 e 6 (banda termal do Landsat 7, nas quais foram considerados como instrumentos de análise: a urbanização, as características geoecológicas (topografia e o sistema meteorológico (clima regional. Os resultados demonstram que o fenômeno de ilha de calor é constatado no município de Goiânia, havendo diferenças de temperatura de até 10°C entre a área urbana e a rural do município, sendo possível caracterizar determinados usos antrópicos (classes de cobertura do solo e intervalos altimétricos como potencializadores de maiores valores de temperatura.

  8. Evapotranspiração e estimativa da água consumida em perímetro irrigado do Semiárido brasileiro por sensoriamento remoto

    Bernardo Barbosa da Silva

    2012-09-01

    Full Text Available O objetivo deste trabalho foi mapear a evapotranspiração real (ETr e determinar o volume de água utilizado no projeto de irrigação de São Gonçalo, PB, no Semiárido brasileiro, com auxílio do sensoriamento remoto. Foram adquiridas imagens TM/Landsat 5 da área em estudo, em 2008, que foram utilizadas na obtenção dos mapas temáticos da ETr diária. Selecionaram-se dois pomares de coqueiro‑anão para validação dos resultados da evapotranspiração obtida com o "surface energy balance algorithm for land" (ET Sebal e com o método FAO‑56 (ET FAO. Para determinação da ET FAO, utilizou-se o produto entre o coeficiente de cultura, o coeficiente de ajuste e a evapotranspiração de referência. As diferenças obtidas, com uso das duas técnicas, resultaram em raiz do erro quadrado médio, erro relativo médio e erro absoluto médio iguais a 0,53 mm, 9,46% e 0,43 mm, respectivamente. Nas áreas irrigadas, a ETr representou 85% do saldo de radiação e, nas de sequeiro, apenas 12,5%. O mapeamento da ETr delimitou claramente as áreas irrigadas das de sequeiro, bem como as diferenças existentes no interior do perímetro irrigado do projeto em investigação. O volume de água empregado no projeto de irrigação representa, somente no período de julho a dezembro, mais de 60% da capacidade do açude de São Gonçalo.

  9. Classificação orientada a objeto de imagens de sensoriamento remoto em estudos epidemiológicos sobre leishmaniose visceral em área urbana

    Andréa Sobral de Almeida

    2014-08-01

    Full Text Available Neste estudo, explorou-se o uso da classificação orientada a objeto de imagens de sensoriamento remoto em estudos epidemiológicos sobre leishmaniose visceral (LV em áreas urbanas. A classificação orientada a objeto foi aplicada a cenas Landsat 5 TM da cidade de Teresina, Piauí, Brasil, para obtenção de informações ambientais e temperatura. Para o período de 1993-1996, a taxa de incidência de LV nos setores censitários da cidade foi positivamente correlacionada com a área do setor censitário coberta por vegetação densa, rasteira e solo exposto e negativamente com a área coberta por água e áreas densamente ocupadas. No período de 2001-2006, foram encontradas correlações positivas com vegetação densa, rasteira, solo exposto e áreas densamente ocupadas e negativas com áreas urbanas com alguma vegetação. A temperatura da superfície terrestre foi negativamente associada à incidência de LV nos dois períodos. A classificação orientada a objeto pode ser útil para caracterizar paisagens associadas à ocorrência da LV em áreas urbanas e delimitar áreas de risco para definição de prioridades na implementação de intervenções.

  10. "Estimativa da produção primária e biomassa fitoplanctônica através de sensoriamento remoto da cor do oceano e dados in situ na Costa Sudeste Brasileira"

    Milton Kampel

    2003-01-01

    A biomassa e a produtividade primária fitoplanctônica da costa sudeste foram estimadas através de sensoriamento remoto da cor do oceano e dados in situ. Foram realizados quatro cruzeiros hidrográficos sazonais de mesoescala nas regiões de plataforma e talude continental durante os verões e invernos de 2001 e 2002. Com a descrição das características hidrográficas e distribuições de nutrientes inorgânicos dissolvidos, complementada pela análise de imagens orbitais (AVHRR e SeaWiFS), foi possív...

  11. Sensoriamento Remoto com VANTs: uma nova possibilidade para a aquisição de geoinformações

    Henrique Lima de Sousa

    2017-07-01

    Full Text Available Os Veículos Aéreos Não Tripulados (VANTs – ou Drones, como conhecidos popularmente – estão cada vez mais em alta, como se pode notar na excitação do mercado geoinformacional. Muitas são as possibilidades de aplicações oferecidas, com os mais diversos tipos de modelos e sensores. Contudo, não se pode negar que ainda existem dúvidas com relação aos reais ganhos ao optar por esta plataforma. Refletindo acerca dessas incógnitas, já é possível encontrar pesquisas que buscam respostas ou confirmações técnico-científicas sobre o que é exposto comercialmente. Seguindo, então, o mesmo raciocínio, este trabalho avaliou o quão de fato já é viável o emprego desses equipamentos para aquisição de geoinformações, seus ganhos e seus desafios (até o momento, a partir de uma revisão da literatura e também de uma análise da qualidade posicional – que apresentou resultados positivos – de um projeto piloto realizado com imagens adquiridas por uma Aeronave Remotamente Pilotada (ARP em Portugal.

  12. COMPARTIMENTAÇÃO GEOMORFOLÓGICA E MORFOTECTÔNICA DO GRÁBEN DO CARIATÁ, PARAÍBA, A PARTIR DE IMAGEAMENTO REMOTO

    Bruno Azevedo Cavalcanti Tavares

    2014-12-01

    Full Text Available Desde a sua identificação, a unidade geomórfica Gráben do Cariatá se tornou se fundamental importância para a interpretação do cenário morfotectônico regional no contexto do rebordo leste do nordeste do Brasil, desafiando algumas hipóteses prévias sobre a evolução geomórfica do piemonte do planalto da Borborema. Neste sentido faz-se necessário refinar o conhecimento referente à história geomórfica do gráben, de seus preenchimentos sedimentares, unidades pedo-estratigráficas e controles lito-estruturais sobre as associações de formas de relevo. Um estudo desta ordem pode lançar luz sobre a evolução dos compartimentos escalonados que antecedem a escarpa da Borborema e suas implicações sob pontos de vista páleo-climáticos e neotectônicos, a partir de abordagens que prescindam da utilização do conceito das superfícies regionais de aplainamento. A combinação de Modelos digitais do terreno e imagens de satélite propiciaram uma modelagem mais precisa da área de estudo, sendo uma importante ferramenta para a análise da influencia da neotectônica sobre a compartimentação do relevo. Desse modo, feições como escarpas, facetas triangulares, anfiteatros de erosão e vales lineares foram identificados a partir de técnicas de sensoriamento remoto e estão estritamente ligadas às linhas de reativação de falhas no gráben. A rede de drenagem principal da área de estudo, o rio Paraíba, também está influenciada pela dinâmica morfotectônica, o que se faz explicitar a partir de uma incisão de maior ordem em determinados setores, resultando mesmo no abandono da antiga planície sob a forma de terraços erosivos.

  13. Sensores electroquímicos basados en nanomateriales de carbono

    Remesal García, Lucía

    2017-01-01

    Caracterización de tres sensores basados en materiales de nanocarbono mediante el análisis de diferentes compuestos. El objetivo del proyecto ha sido analizar que sensor es el más sensible para detectar los compuestos electroactivos en soluciones. Se han utilizado tres tipos diferentes de sensores: Electrodo de carbono modificado con nanotubos de carbono (CNT), Electrodo de carbono modificado con Nanofibras de carbono grafitizadas (CNF) y Electrodo de carbono modificado con grafeno (GPH). El ...

  14. Monitoraggio in continuo di strutture e del territorio mediante la tecnologia GNSS

    Poluzzi, Luca

    2016-01-01

    Al giorno d’oggi, la tecnologia GNSS può essere uno strumento utile, non solo in ambito di navigazione, ma anche per applicazioni di posizionamento di precisione come il monitoraggio di strutture o del territorio. Questa tecnica permette un controllo in continuo, anche da remoto, e ha un costo relativamente basso sia per quanto riguarda le strumentazioni che per gli aspetti di materializzazione e mantenimento. Nell’ottica di utilizzare la tecnologia GNSS per applicazioni di monitoraggio, il p...

  15. Taste sensor; Mikaku sensor

    Toko, K. [Kyushu University, Fukuoka (Japan)

    1998-03-05

    This paper introduces a taste sensor having a lipid/polymer membrane to work as a receptor of taste substances. The paper describes the following matters: this sensor uses a hollow polyvinyl chloride rod filled with KCl aqueous solution, and placed with silver and silver chloride wires, whose cross section is affixed with a lipid/polymer membrane as a lipid membrane electrode to identify taste from seven or eight kinds of response patterns of electric potential output from the lipid/polymer membrane; measurements of different substances presenting acidic taste, salty taste, bitter taste, sweet taste and flavor by using this sensor identified clearly each taste (similar response is shown to a similar taste even if the substances are different); different responses are indicated on different brands of beers; from the result of measuring a great variety of mineral waters, a possibility was suggested that this taste sensor could be used for water quality monitoring sensors; and application of this taste sensor may be expected as a maturation control sensor for Japanese sake (wine) and miso (bean paste) manufacturing. 2 figs., 1 tab.

  16. Gestão agroecológica de microbacias hidrográficas através de técnicas de geoprocessamento e sensoriamento remoto: caso Fazenda Pantanoso

    Santos Fioravante Jaekel dos

    2004-01-01

    Full Text Available O manejo sustentado de agroecossistemas passa pelo planejamento de uso dos mesmos, para o que necessita serem avaliados os recursos naturais e as condições sociais, culturais e econômicas dos habitantes. Técnicas de geoprocessamento e sensoriamento remoto, que permitem avaliar os recursos de grandes áreas e anexá-los a bancos de dados georreferenciados, foram utilizados para caracterizar o meio físico e planejar o uso da fazenda El Pantanoso, Departamento de Cerro Largo, Uruguai. Dados topográficos, planialtimétricos, de solo e uso atual, foram usados para gerar os planos de informação: mapa base, modelo numérico do terreno, declividade, solos, aptidão de uso agrícola dos solos, uso atual, zoneamento ambiental e conflitos de uso. A pesquisa mostra que a região apresenta Planossolos, Argissolos, Chernossolos, Vertissolos, Organossolos, Neossolos e Gleissolos e que os mesmos apresentam ampla faixa de aptidão de uso, o que facilita seu zoneamento ambiental. Considerando-se que a tradicional pecuária desenvolvida nas áreas de topografia ondulada e arroz nas várzeas, constitui o uso adequado dos solos, então lavouras de arroz encontradas ao longo dos sistemas de drenagem, onde deveria ser mantida a vegetação ciliar natural, constitui o principal conflito de uso relacionado ao zoneamento ambiental da região. O geoprocessamento e sensoriamento remoto mostraram-se eficientes no planejamento de uso da Fazenda Pantanoso.

  17. Lidar fluoro sensor measurements of pine trees affected by the Blastophagus destruens Wollaston in the Frascati ENEA centre; Monitoraggio mediante lidar fluorosensore di piante di pino domestico attaccate dal coleottero Scolitide Blastofago Distruttore (Blastophagus Destruens W.) al centro ENEA di Frascati

    Barbini, R.; Colao, F.; Fantoni, R.; Palucci, A.; Ribezzo, S. [ENEA, Centro Ricerche Frascati, Rome (Italy). Dip. Innovazione; Cinti, S. [Osservatorio per le Malattie delle Piante, Regione Lazio, Rome (Italy); Paparatti, B. [Tuscia Univ., Viterbo (Italy). Dip. Protezione delle Piante, Sez. Entomologia

    1996-10-01

    The lidar fluoro sensor available at ENEA-Frascati has been used for a series of laboratory measurements to monitor the health of pine trees (Pinus Pinea L.) cut branches. The present campaign has been carried out in the Frascati Research Center to investigate pine plants affected by a parasite (Blastophagus destruens Wollaston), and to follow the effects of the phyto-chemical substances used in the therapy. The laboratory tests have been carried on during the first week of therapy and in the following months. A probe laser has been used to measure the chlorophyll LIF (laser induced fluorescence) signals at 690 nm, before and after switching on either a saturating actinic lamp or an intense laser pulse. The detected induction curves supplied us with information on the plant photosynthetic activity and on its time adaptation to the light exposure.

  18. Ambient Sensors

    Börner, Dirk; Specht, Marcus

    2014-01-01

    This software sketches comprise two custom-built ambient sensors, i.e. a noise and a movement sensor. Both sensors measure an ambient value and process the values to a color gradient (green > yellow > red). The sensors were built using the Processing 1.5.1 development environment. Available under

  19. DISEÑO DE UNA APLICACIÓN ADAPTATIVA PARA MONITOREO REMOTO A TRAVÉS DE TECNOLOGÍAS MÓVILES

    Andrés Barragán

    2012-05-01

    Full Text Available Se presentan las consideraciones asociadas al diseño de una aplicación móvil que permita mediante una interfaz sencilla y amigable con el usuario, la supervisión de diferentes procesos a nivel residencial y/o de industria. Si bien las consideraciones de diseño expuestas pueden ser aplicadas de manera general al monitoreo de procesos residenciales y/o industriales, la temática expuesta se encuentra enfocada al consumo de energía eléctrica, bien sea a nivel residencial o corporativo. Se contempla el uso de la aplicación por parte de diferentes usuarios, según diferentes configuraciones de sitios y perfiles que se encuentren habilitadas. Así mismo la aplicación toma en consideración el acceso a la configu¬ración de parámetros por parte del Administrador, desde una interfaz Web. Tales elementos son incluidos en el diseño tomando en consideración metodologías de desarrollo de software de amplia aceptación en la industria.

  20. IMPORTÂNCIA DE REMANESCENTES FLORESTAIS PARA CONSERVAÇÃO DA BIODIVERSIDADE: ESTUDO DE CASO NA MATA ATLÂNTICA EM SERGIPE ATRAVÉS DE SENSORIAMENTO REMOTO

    André Luiz Conceição Santos, Celso Morato de Carvalho, Thiago Morato de Carvalho

    2014-07-01

    Full Text Available São discutidos aspectos relevantes sobre fragmentos florestados para a conservação da biodiversidade e especificamente são analisados 403 remanescentes florestais (31.000 ha na mata atlântica de Sergipe através de sensoriamento remoto com base em imagens Spot 5 e fotografias aéreas. Os remanescentes foram categorizados em cinco grupamentos: i Santa Luzia do Itanhy-Estância, ii Aracaju-São Cristóvão-Itabaiana, iii Rosário do Catete, iv Japaratuba, v Pacatuba-Japoatã. A maioria dos fragmentos variou entre 17 – 70 ha; os grupamentos entre Aracaju e Santa Luzia do Itanhy estão entre os maiores. A conectividade entre os fragmentos variou entre 2-19 km; as distâncias médias entre fragmentos variaram em torno de 1 km. Os índices de circularidade variaram entre 0,006-0,31, mostrando prevalência de fragmentos com bordas irregulares.

  1. Attention Sensor

    Börner, Dirk; Kalz, Marco; Specht, Marcus

    2014-01-01

    This software sketch was used in the context of an experiment for the PhD project “Ambient Learning Displays”. The sketch comprises a custom-built attention sensor. The sensor measured (during the experiment) whether a participant looked at and thus attended a public display. The sensor was built

  2. Sensor Virtual Adaptable de Concentración de Etanol para Fermentadores Industriales

    Martínez, Boris; Herrera, Francisco; Peralta, Luis

    2009-01-01

    Resumen: Los sistemas de control emplean sensores para observar el estado del proceso y tomar decisiones. En ocasiones, se necesita estimar las variables del proceso pues el sensor adecuado no existe, es prohibitivamente costoso o las mediciones son difíciles de realizar. Una solución consiste en inferir las variables no medidas a partir de otras variables mediante sensores virtuales o sensores por software (soft-sensors). En los procesos de fermentación alcohólica, la medición de la concentr...

  3. Diseño e implementación de un sistema domótico remoto vía GSM para el Hotel San Miguel

    Oña Chipuxi, Rosa Yadira

    2015-01-01

    At present there is a constant technological advancement, security has seen the need to innovate alarm systems that exist in the market, So that is necessary the creation of a general system in which developed the construction of a home automation system using the GSM technology. The goal of this project is the analysis, design and implementation of a prototype home automation remote via GSM for Hotel San Miguel, able to activate the alarm when a sensor to send a signal informing the possi...

  4. Monitorización del consumo eléctrico con sensores Waspmote

    Moreno Martín, Fernando

    2015-01-01

    El proyecto consiste en la monitorización del consumo eléctrico de los electrodomésticos de un hogar mediante dispositivos de bajo coste. A este fin se ha seleccionado una plataforma modular open source para construir redes de sensores inalámbricas: Waspmote. Para ello se ha desarrollado una aplicación para esta plataforma que permite tomar muestras de corriente por medio de un sensor y trasmitirlas mediante una red WAN a un ordenador en donde se almacenarán. Así mismo se ha implemen...

  5. Sensors, Volume 4, Thermal Sensors

    Scholz, Jorg; Ricolfi, Teresio

    1996-12-01

    'Sensors' is the first self-contained series to deal with the whole area of sensors. It describes general aspects, technical and physical fundamentals, construction, function, applications and developments of the various types of sensors. This volume describes the construction and applicational aspects of thermal sensors while presenting a rigorous treatment of the underlying physical principles. It provides a unique overview of the various categories of sensors as well as of specific groups, e.g. temperature sensors (resistance thermometers, thermocouples, and radiation thermometers), noise and acoustic thermometers, heat-flow and mass-flow sensors. Specific facettes of applications are presented by specialists from different fields including process control, automotive technology and cryogenics. This volume is an indispensable reference work and text book for both specialists and newcomers, researchers and developers.

  6. Gas Sensor

    Luebke, Ryan

    2015-01-22

    A gas sensor using a metal organic framework material can be fully integrated with related circuitry on a single substrate. In an on-chip application, the gas sensor can result in an area-efficient fully integrated gas sensor solution. In one aspect, a gas sensor can include a first gas sensing region including a first pair of electrodes, and a first gas sensitive material proximate to the first pair of electrodes, wherein the first gas sensitive material includes a first metal organic framework material.

  7. Gas Sensor

    Luebke, Ryan; Eddaoudi, Mohamed; Omran, Hesham; Belmabkhout, Youssef; Shekhah, Osama; Salama, Khaled N.

    2015-01-01

    A gas sensor using a metal organic framework material can be fully integrated with related circuitry on a single substrate. In an on-chip application, the gas sensor can result in an area-efficient fully integrated gas sensor solution. In one aspect, a gas sensor can include a first gas sensing region including a first pair of electrodes, and a first gas sensitive material proximate to the first pair of electrodes, wherein the first gas sensitive material includes a first metal organic framework material.

  8. Sensor web

    Delin, Kevin A. (Inventor); Jackson, Shannon P. (Inventor)

    2011-01-01

    A Sensor Web formed of a number of different sensor pods. Each of the sensor pods include a clock which is synchronized with a master clock so that all of the sensor pods in the Web have a synchronized clock. The synchronization is carried out by first using a coarse synchronization which takes less power, and subsequently carrying out a fine synchronization to make a fine sync of all the pods on the Web. After the synchronization, the pods ping their neighbors to determine which pods are listening and responded, and then only listen during time slots corresponding to those pods which respond.

  9. Aplicación de servicios web estándares para el monitoreo hidrometeorológico automático, integrando información de sensores diversos usando ontologías

    Jaime Veintimilla-Reyes

    2018-03-01

    Full Text Available El actual avance tecnológico mundial y el crecimiento e las comunicaciones, ha hecho necesario que la información que generan diferentes dispositivos, en especial aquellos que disponen de sensores, esté disponible de forma inmediata para poder dar respuestas y/o soluciones dependiendo de los eventos que pudieran presentarse. El desarrollo de esta área en los últimos años ha provocado la aparición de dispositivos con sensores de tipos y marcas heterogéneas. El presente artículo presenta una propuesta de arquitectura que integra varios servicios web estándares para la recopilación, organización, y almacenamiento de la información proveniente de sensores hidrometeorológicos. Igualmente se propone la aplicación de servicios para el control remoto de los sensores y para la gestión de eventos y generación de alertas. Todos estos servicios web forman parte del estándar Sensor Web Enablement (SWE. Considerando la diversidad en las estaciones y sensores hidrometeorológicos que típicamente se encuentra en una red de monitoreo, se propone en este artículo la aplicación de ontologías para homogenizar e integrar la información proveniente de sensores de diferentes tipos y fabricantes.

  10. Parâmetros biofísicos obtidos por sensoriamento remoto em região semiárida do estado do Rio Grande do Norte, Brasil

    Joel M. Bezerra

    2014-01-01

    Full Text Available Apesar de ser o único bioma brasileiro cujos limites estão restritos ao território nacional, pouca atenção tem sido dada à conservação da diversificada paisagem da Caatinga. Em virtude da carência de dados de campo para monitorar os parâmetros biofísicos da Caatinga em região semiárida do Nordeste brasileiro, este trabalho teve como objetivo avaliar a dinâmica espaço-temporal por meio de técnicas e produtos de Sensoriamento Remoto. A área de estudo compreendeu a Unidade de Conservação do Parque Nacional da Furna Feia e suas adjacências, situada entre os municípios de Mossoró e Baraúna (RN, Brasil. Utilizaram-se seis imagens orbitais do TM LANDSAT 5, órbita 216 e ponto 63, no período de 2007 a 2010. Com auxílio da ferramenta Sistema de Informação Geográfica se implementaram os algoritmos com geração das cartas temáticas expressando a variabilidade dos parâmetros de albedo da superfície, NDVI e temperatura de superfície. Os resultados obtidos não só foram consistentes com dados da literatura para os diferentes usos do solo e variações climáticas. Além de demonstrar o potencial das geotecnologias, a compreensão da dinâmica dos padrões espaciais e temporais dos processos biofísicos de interação solo-planta-atmosfera da Caatinga no Semiárido.

  11. ANÁLISE DA DISTRIBUIÇÃO ESPAÇO-TEMPORAL DA CHUVA, NA MESORREGIÃO METROPOLITANA DE BELÉM-PARÁ: CONTRIBUIÇÕES DA TÉCNICA DE SENSORIAMENTO REMOTO

    Marcos Ronielly Silva Santos

    2017-06-01

    Full Text Available A identificação dos montantes de chuva para uma região corrobora para a gestão eficiente das politicas públicas e o desenvolvimento social, econômico e ambiental dos centros urbanos.  A mesorregião metropolitana de Belém detém a maior concentração populacional e urbana da Amazônia Oriental, apresentando elevados índices pluviômetros durante todo o ano. Neste contexto o presente trabalho visa identificar a distribuição temporal e espacial da precipitação na mesorregião metropolitana de Belém e associa-la aos principais sistemas precipitantes que atuam na região. Para isto se utilizou o sensoriamento remoto por meio da técnica do CPC MORPHing technique (CMORPH com resolução temporal de 30 min e espacial de 8/8 km. A partir da técnica empregada foram gerados mapas da distribuição têmporo-espacial da chuva com as médias mensais para os dozes meses do ano, decorrentes dos acumulados do período de Jan/2000 a Dez/2010. Os resultados mostram que há uma grande variação temporal e espacial da chuva na mesorregião evidenciando de modo satisfatório a sazonalidade regional da precipitação, com altos índices durante o período chuvoso e baixos índices no período menos chuvoso. Trabalhos que visem à interdisciplinaridade podem contribuir de forma eficaz para estruturação das ciências ambientais e para a tomada de decisões.

  12. Variação da Cobertura do Solo no Pantanal de 2000 a 2015 por Sensoriamento Remoto com Software e Dados Gratuitos

    Poliana Neves Peres

    2016-04-01

    Full Text Available Devido à grande importância ambiental e diante do avanço das atividades agropastoris no Pantanal, o presente estudo tem como objetivo analisar as modificações ocorridas na cobertura do solo na região, considerada uma das áreas mais ricas em biodiversidade do planeta. O trabalho justifica-se na relevância da preservação do Pantanal, já que este desempenha papel importantíssimo na manutenção de tal biodiversidade. Sendo a pecuária a base da economia local, e sabendo que é a atividade que mais promove o desmatamento, deve-se redobrar o monitoramento para garantir a conservação e prever possíveis impactos na vegetação. Assim, para a realização deste trabalho utilizaram-se imagens do satélite TERRA, sensor MODIS, as quais estão disponíveis de forma gratuita na rede, utilizando-se também dados de NDVI (índice de vegetação da diferença normalizada, produto MOD13Q1, do mesmo sensor e também gratuito, de dois anos distintos – 2000 e 2015. Tais dados foram analisados no SIG (sistemas de informações geográficas livre e gratuito QGIS versão 2.8 (QGIS Development Team, 2015, onde através de composições falsa-cor multitemporais e de reclassificação verificou-se a mudança na cobertura do solo do Pantanal entre os dois anos. O resultado apresentou a redução de 28,8% de vegetação arbóreo-arbustiva e o aumento de 11,6% de vegetação rasteira (campos ou pastagens. É interessante destacar que a metodologia utilizada neste trabalho é passível de ser aplicada em outros locais sem custo, visto que não houve a necessidade de gastos com compra de imagens e softwares.

  13. Reingeniería del proceso productivo empresarial mediante la incorporación de propuestas del campo de internet de las cosas.

    CLIMENT PASCUAL, RAFAEL

    2015-01-01

    [ES] Nuevas tecnologías afectan a los sistemas empresariales. Una de estas tendencias se dirige hacia el concepto de empresa sensible (Sensing Enterprise), donde la empresa recibe información en tiempo real sobre su entorno, un entorno que es "global" por la naturaleza (mediante tweets, sensores de información, RFID o GPS como ejemplos) y alimenta constantemente su proceso de toma de decisiones, pudiendo este estar controlado por los "sujetos" (es decir, los seres humanos), o por los "objetos...

  14. Chemical sensors

    Hubbard, C.W.; Gordon, R.L.

    1987-05-01

    The revolution in analytical chemistry promised by recent developments in the field of chemical sensors has potential for significant positive impact on both research and production activities conducted by and for the Department of Energy. Analyses which were, in the past, performed only with a roomful of expensive equipment can now be performed with miniature solid-state electronic devices or small optical probes. Progress in the development of chemical sensors has been rapid, and the field is currently growing at a great rate. In accordance, Pacific Northwest Laboratory initiated a survey of recent literature so that contributors to active programs in research on analytical methods could be made aware of principles and applications of this new technology. This report presents the results of that survey. The sensors discussed here are divided into three types: micro solid-state devices, optical sensors, and piezoelectric crystal devices. The report is divided into three corresponding sections. The first section, ''Micro Solid-State Devices,'' discusses the design, operation, and application of electronic sensors that are produced in much the same way as standard solid-state electronic devices. The second section, ''Optrodes,'' covers the design and operation of chemical sensors that use fiber optics to detect chemically induced changes in optical properties. The final section, ''Piezoelectric Crystal Detectors,'' discusses two types of chemical sensors that depend on the changes in the properties of an oscillating piezoelectric crystal to detect the presence of certain materials. Advantages and disadvantages of each type of sensor are summarized in each section

  15. Identificación, caracterización y dinámica de las geoformas glaciales y periglaciales en la Cordillera de los Andes a través de sensores remotos

    Falaschi, Daniel

    2015-01-01

    El presente trabajo de Tesis Doctoral tuvo el objetivo de estudiar los glaciares y glaciares de escombros en tres regiones montañosas a lo largo de la Cordillera de los Andes Argentina: Monte San Lorenzo (Provincia de Santa Cruz), Volcán Domuyo (Provincia de Neuquén), y Nevados de Cachi (Provincia de Salta). Cada uno de estos sitios presenta características climáticas propias, representativas de tres porciones particulares de los Andes: Andes Patagónicos Meridionales, Andes Centrales Meridion...

  16. Seguimiento de trayectorias tridimensionales de un quadrotor mediante control PVA

    Silvia Estellés Martínez

    2014-01-01

    Full Text Available Resumen: Este trabajo presenta el modelado de un quadrotor como un sistema multicuerpo llevado a cabo mediante el software Vehicle- Sim, en el que los diferentes componentes del sistema son descritos mediante una estructura paterno-filial señalando las restricciones físicas entre ellos. Los modelos estructural y aerodinámico han sido desarrollados mediante este software, ampliamente utilizado en la simulación del comportamiento dinámico de vehículos.Sobre el modelo resultante se he desarrollado un algoritmo de control basado en la metodologia PVA con la finalidad de obtener un seguimiento de trayectoria mediante acciones de control suaves. Empleando la metodología convencional de control PVA no es posible estabilizar el vehículo en todos los rangos de posicionamiento lateral (y y longitudinal (x. En este artículo los autores muestran como esta limitación en el diseño de una estrategia de control PVA convencional es solventada con una modificación consistente en sustituir los parámetros constantes del PVA clásico por funciones dependientes del desplazamiento.El sistema de control es implementado para adecuarse a los requerimientos de las actuaciones y se diseña sobre la plataforma de simulación multidominio Simulink. Con la finalidad de obtener una importante mejora en la respuesta de posicionamiento, se im- plementa un generador de trayectorias continuas.Una vez que el modelo es desarrollado y el sistema de control implementado, los autores presentan el modelo matemático y los resultados de las simulaciones realizadas. Éstas validan el empleo tanto de la metodología de control PVA aplicada, como de la alimentación de trayectorias predefinidas, no sólo para la posición, sino también para la velocidad y aceleración. Abstract: In this work the authors present the modelling of a quadrotor as a multibody system carried out with the software VehicleSim, in which the different

  17. Lqr Robusto Mediante Incertidumbre Acotada En Los Datos

    C. Ramos

    2007-07-01

    Full Text Available Resumen: En este trabajo se presenta el sintonizado del Regulador Lineal Cuadrático (LQR mediante la técnica de incertidumbre acotada en los datos o Bounded Data Uncertainties (BDU con el fin de mejorar la robustez del sistema, planteándose como un Min-Max donde se busca la mejor solución en el peor escenario posible. Así se ofrece un nuevo método guiado de ajuste del LQR, considerando los límites de la incertidumbre. La aplicación a sistemas multidimensionales no es trivial, pues presenta la forma de un Two-Point Boundary Value Problem (TPBVP, el cual se resuelve iterativamente. : Técnicas Minimax, Regularización, Método de Control LQR, Robustez, Incertidumbre, Ecuaciones Matriciales de Riccati, Problema de Valor Límite, Sistemas Multidimensionales

  18. Caracterización a impacto de caucho reciclado mediante elementos finitos

    Escribano Castro, Ane

    2015-01-01

    Análisis de caucho reciclado de manera hiperelástica mediante métodos de ajuste de Mínimos Cuadrados con programa MATLAB y Curve fitting mediante ANSYS. Para la parte viscoelástica se usa Algoritmo de Optimicación con MATLAB. Comprobación de resultados y fiabilidad.

  19. Correspondência eficiente de descritores SIFT para construção de mapas densos de pontos homólogos em imagens de sensoriamento remoto

    Marcelo Teixeira Silveira

    Full Text Available Métodos automáticos de localização de pontos homólogos em imagens digitais baseados em área, combinados com técnicas de crescimento de região, são capazes de produzir uma malha densa e exata de pontos homólogos. Entretanto, o processo de crescimento de região pode ser interrompido em regiões da imagem, cuja paralaxe no eixo horizontal apresenta variação abrupta. Essa situação geralmente é causada por uma descontinuidade na superfície ou espaço-objeto imageado, tal como um prédio numa cena urbana ou um paredão de exploração de uma mina a céu aberto. Nesses casos, novos pares de pontos homólogos (sementes devem ser introduzidos, normalmente por um operador humano, a partir dos quais o processo é reiniciado. Dependendo do tipo da imagem utilizada e da estrutura 3D da região mapeada, a intervenção humana pode ser considerável. Uma alternativa totalmente automatizada em que se combinam as técnicas SIFT (Scale Invariant Feature Transform, pareamento por mínimos quadrados e crescimento de região foi proposta anteriormente pelos autores. O presente trabalho apresenta uma extensão a essa técnica. Basicamente, propõem-se alterações na etapa de correspondência do SIFT, que exploram características de estereogramas produzidos por sensores aéreos e orbitais. Avaliações experimentais demonstram que as modificações propostas trazem dois tipos de benefícios. Em primeiro lugar, obtém-se um aumento do número de pontos homólogos encontrados, sem aumento correspondente na proporção de falsas correspondências. Em segundo lugar, a carga computacional é reduzida substancialmente.

  20. Automotive sensors

    Marek, Jiri; Illing, Matthias

    2003-01-01

    Sensors are an essential component of most electronic systems in the car. They deliver input parameters for comfort features, engine and emission control as well as for the active and passive safety systems. New technologies such as silicon micromachining play an important role for the introduction of these sensors in all vehicle classes. The importance and use of these sensor technologies in today"s automotive applications will be shown in this article. Finally an outlook on important current developments and new functions in the car will be given.

  1. Piezoceramic Sensors

    Sharapov, Valeriy

    2011-01-01

    This book presents the latest and complete information about various types of piezosensors. A sensor is a converter of the measured physical size to an electric signal. Piezoelectric transducers and sensors are based on piezoelectric effects. They have proven to be versatile tools for the measurement of various processes. They are used for quality assurance, process control and for research and development in many different industries. In each area of application specific requirements to the parameters of transducers and sensors are developed. This book presents the fundamentals, technical des

  2. Prediction of soil chemical attributes using optical remote sensing=Predição de atributos químicos do solo utilizando sensoriamento remoto ótico.

    José Alexandre Melo Demattê

    2011-10-01

    Full Text Available Soil fertility variability management is one of the pioneering and important areas in which Precision Agriculture has been commercially applied. Consequently, the objective of this work was to predict soil chemical attributes through spectral responses. The 1,000 ha study area used for this report was located in Uberlândia, Minas Gerais State, Brazil. Thirty sampling points were established, at which the soil was collected at 3 different depths. The samples were chemically and physically analyzed and the radiometric data obtained in the 400 – 2500 nm range. Multiple regression equations were generated for sum of bases, cation exchange capacity, base saturation, aluminum saturation, pH, P, K, Ca, Mg, Al, and H, all using 60 soil samples. H, Al, m%, and pH were found to have R2 values less than 0.50. Equations with an R2 > 0.50 for the other attributes were tested for the 30 unknown soil samples, and the estimated values were obtained. These values were then compared with those determined by conventional analysis. The coefficients of correlation were higher than 50% for all attributes except P and V%. Results indicated that determining chemical attributes with models that are specific for the region is feasible. Uma das primeiras e mais importantes áreas nas quais a Agricultura de Precisão está sendo comercialmente aplicada é o manejo da variabilidade da fertilidade do solo. Desta forma, o objetivo deste trabalho foi predizer o teor dos atributos químicos do solo através da sua resposta espectral. A área de estudo de 1000 ha localiza-se em Uberlândia, Estado de Minas Gerais. Estabeleceu-se 30 pontos de amostragem nos quais o solo foi coletado em 3 profundidades. As amostras foram analisadas química e fisicamente e, os dados radiométricos obtidos com um sensor em laboratório na faixa de 400 – 2500 nm. Equações de regressão múltipla foram geradas para soma de bases, CTC, saturação por bases, saturação por alumínio, pH, P, K

  3. Optischer Sensor

    Brandenburg, A.; Hutter, F.; Edelhaeuser, R.

    1992-01-01

    WO 2010040565 A1 UPAB: 20100506 NOVELTY - The integrated optical sensor comprises a first waveguide (4), a second waveguide (5) optically coupled to the first waveguide via a directional coupler, a substrate, which carries the first and the second waveguides, a single waveguide coupled with a light source, and an output waveguide coupled with a light-sensitive element. The sensor has a functional surface in the region of the directional coupler for depositing or deposition of the substance to...

  4. Wireless sensor

    Lamberti, Vincent E.; Howell, JR, Layton N.; Mee, David K.; Sepaniak, Michael J.

    2016-02-09

    Disclosed is a sensor for detecting a target material. The sensor includes a ferromagnetic metal and a molecular recognition reagent coupled to the ferromagnetic metal. The molecular recognition reagent is operable to expand upon exposure to vapor or liquid from the target material such that the molecular recognition reagent changes a tensile stress upon the ferromagnetic metal. The target material is detected based on changes in the magnetic switching characteristics of the ferromagnetic metal caused by the changes in the tensile stress.

  5. Ciclo de vida da família e desmatamento na Amazônia: combinando informações de sensoriamento remoto com dados primários

    Marcellus Marques Caldas

    2003-12-01

    Full Text Available Este artigo examina as relações entre as características sociodemográficas das famílias de pequenos produtores na Amazônia e a hipótese do ciclo de vida no processo de tomada de decisão de desmatar. A análise foi conduzida combinando informações de sensoriamento remoto e de sistema de informações geográficas com dados primários de 153 pequenos produtores estabelecidos ao longo da rodovia Transamazônica. Análises de regressões foram efetuadas juntamente com testes de autocorrelação espacial. Os resultados levaram à conclusão de que as características sociodemográficas das famílias, bem como fatores institucionais e de mercado, influenciam a tomada de decisão de uso da terra. Esses resultados permitem concluir ainda que, apesar de não serem muito populares entre os cientistas sociais brasileiros, os dados obtidos através das imagens de satélite podem ser muito úteis neste tipo de estudo. Além disso, a pesquisa aqui apresentada indica que dados sociodemográficos da família, bem como os de mercado, podem resultar em problemas de má especificação do modelo. O mesmo se aplica a modelos que não incorporem análises espaciais.This paper examines the relationships between the sociodemographic characteristics of small settlers in the Brazilian Amazon and the life cycle hypothesis in the process of deforestation. The analysis was conducted combining remote sensing and geographic data with primary data of 153 small settlers along the Transamazon Highway. Regression analyses and spatial autocorrelation tests were conducted. The results from the empirical model indicate that sociodemographic characteristics of households, as well as institutional and market factors, affect the land use decision. Although remotely sensed information are not yet very popular among Brazilian social scientists, these results confirm that they can be very useful for this kind of study. Furthermore, the research presented by this paper strongly

  6. Procedimiento de estabilizacion de mercurio liquido mediante cemento polimerico de azufre,via sulfuro de mercurio

    López Gómez, Félix Antonio; López-Delgado, Aurora; Alguacil, Francisco José; Alonso Gámez, Manuel

    2009-01-01

    Procedimiento para la estabilización de mercurio líquido mediante la obtención de cementos poliméricos de azufre que comprende: (a) transformación del mercurio líquido en sulfuro de mercurio (metacinabrio) mediante reacción química, en condiciones estequiométricas, entre el mercurio y el azufre elemental; y (b) obtención de cemento polimérico de azufre mediante la incorporación el sulfuro de mercurio obtenido en la etapa anterior, en una mezcla estable constituida por áridos, azufre elemental...

  7. Radiation sensor

    Brown, W.L.; Geronime, R.L.

    1977-01-01

    Radiation sensor and thermocouple, respectively, which can be used for reactor in-core instrumentation. The radiation sensor consists of an inconel conductor wire and rhodium emitter wire, the thermocouple of two intertwined alumel or chromel wires. Both are arranged in the center of a metal tube relative to which they are separated by an insulator made of SiO 2 fibers. This insulator is first introduced as a loose fabric between the radiation sensor and the thermocouple, respectively, and the metal tube and then compacted to a density of 35-73% of pure SiO 2 by drawing the tube. There is no need for soldering or welding. The insulation resistivity at room temperature ist between 10 14 and 10 15 ohms. (ORU) [de

  8. Water Sensors

    1992-01-01

    Mike Morris, former Associate Director of STAC, formed pHish Doctor, Inc. to develop and sell a pH monitor for home aquariums. The monitor, or pHish Doctor, consists of a sensor strip and color chart that continually measures pH levels in an aquarium. This is important because when the level gets too high, ammonia excreted by fish is highly toxic; at low pH, bacteria that normally break down waste products stop functioning. Sales have run into the tens of thousands of dollars. A NASA Tech Brief Technical Support Package later led to a salt water version of the system and a DoE Small Business Innovation Research (SBIR) grant for development of a sensor for sea buoys. The company, now known as Ocean Optics, Inc., is currently studying the effects of carbon dioxide buildup as well as exploring other commercial applications for the fiber optic sensor.

  9. Practical Use Technique of Sensor

    Hwang, Gyu Seop

    1985-11-01

    This book tells of practical use technology of sensor, introducing the recent trend of sensor for electronic industry, IC temperature sensor, radiation temperature sensor of surface acoustic wave, optical fiber temperature sensor, a polyelectrolyte film humidity sensor, semiconductor pressure sensor for industrial instrumentation, silicon integration pressure sensor, thick film humidity sensor and its application, photo sensor reflection type, and color sensor. It also deals with sensor for FA, sensor for a robot and sensor for the chemical industry.

  10. Practical Use Technique of Sensor

    Hwang, Gyu Seop

    1985-11-15

    This book tells of practical use technology of sensor, introducing the recent trend of sensor for electronic industry, IC temperature sensor, radiation temperature sensor of surface acoustic wave, optical fiber temperature sensor, a polyelectrolyte film humidity sensor, semiconductor pressure sensor for industrial instrumentation, silicon integration pressure sensor, thick film humidity sensor and its application, photo sensor reflection type, and color sensor. It also deals with sensor for FA, sensor for a robot and sensor for the chemical industry.

  11. Chemical sensor

    Rauh, R. David (Inventor)

    1990-01-01

    A sensor for detecting a chemical substance includes an insertion element having a structure which enables insertion of the chemical substance with a resulting change in the bulk electrical characteristics of the insertion element under conditions sufficient to permit effective insertion; the change in the bulk electrical characteristics of the insertion element is detected as an indication of the presence of the chemical substance.

  12. Load sensor

    Van den Ende, D.; Almeida, P.M.R.; Dingemans, T.J.; Van der Zwaag, S.

    2007-01-01

    The invention relates to a load sensor comprising a polymer matrix and a piezo-ceramic material such as PZT, em not bedded in the polymer matrix, which together form a compos not ite, wherein the polymer matrix is a liquid crystalline resin, and wherein the piezo-ceramic material is a PZT powder

  13. Gas sensor

    Schmid, Andreas K.; Mascaraque, Arantzazu; Santos, Benito; de la Figuera, Juan

    2014-09-09

    A gas sensor is described which incorporates a sensor stack comprising a first film layer of a ferromagnetic material, a spacer layer, and a second film layer of the ferromagnetic material. The first film layer is fabricated so that it exhibits a dependence of its magnetic anisotropy direction on the presence of a gas, That is, the orientation of the easy axis of magnetization will flip from out-of-plane to in-plane when the gas to be detected is present in sufficient concentration. By monitoring the change in resistance of the sensor stack when the orientation of the first layer's magnetization changes, and correlating that change with temperature one can determine both the identity and relative concentration of the detected gas. In one embodiment the stack sensor comprises a top ferromagnetic layer two mono layers thick of cobalt deposited upon a spacer layer of ruthenium, which in turn has a second layer of cobalt disposed on its other side, this second cobalt layer in contact with a programmable heater chip.

  14. Sazonalidade de variáveis biofísicas em regiões semiáridas pelo emprego do sensoriamento remoto Biophysics variables seasonality on surface in semiarid regions by using remote sensing

    Joseilson O. Rodrigues

    2009-09-01

    Full Text Available Para investigar alterações no albedo, no Índice de Vegetação por Diferença Normalizada (NDVI, no saldo de radiação e no fluxo de calor no solo, em decorrência do regime pluviométrico no semiárido cearense, desenvolveu-se um estudo na bacia do Rio Trussu - Ceará, empregando-se sensoriamento remoto. Foram utilizadas duas imagens Landsat 7 ETM+, datadas de 25-10-2000 e 24-7-2001, sendo as variáveis estimadas pelo emprego do algoritmo SEBAL (Surface Energy Balance Algorithms for Land. Os resultados mostraram que as variáveis investigadas apresentaram alterações entre as duas estações, sendo os maiores valores de albedo registrados na estação seca. O NDVI apresentou maior sensibilidade ao regime hídrico, mostrando alto potencial de recuperação da vegetação ao efeito da precipitação. As margens do Rio Trussu apresentaram NDVI superior a 0,39, sendo indicativo de preservação da mata ciliar. A vegetação da bacia mostrou alto poder resiliente expresso pelo incremento nos valores de NDVI para o ano de 2001. A estação chuvosa exerceu também influência marcante sobre o saldo de radiação e fluxo de calor no solo, confirmando o efeito da estação climática na modificação do balanço de energia sobre a bacia.To investigate the rainfall regime effects over the albedo, NDVI (normalized difference vegetation index, net radiation and soil heat flux in a semiarid region (Northeast of Brazil, a study in the Trussu watershed was developed by using remote sensing. The study focuses on two images (Landsat 7 ETM+ provided by Instituto Nacional de Pesquisas Espaciais (INPE, from October 25, 2000 and July 24, 2001, each of them having a different rainfall regime (dry and wet seasons. The images were analyzed by using the SEBAL algorithm (surface energy balance algorithm for land. The results showed that the amount of rainfall affected the investigated variables, and the highest values of albedo were registered during the dry season

  15. Estudio de los sensores táctiles artificiales aplicados a la robótica de agarre

    Pedreño Molina, Juan Luis; Guerrero González, Antonio; López Coronado, Juan

    2000-01-01

    En este Artículo se muestra un estudio comparativo del sistema sensorial humano y de su aplicación a un sistema de agarre robot, mediante las diferentes tipos de sensores artificiales y su respuesta a diversos estímulos externos. Se muestra una solución a partir de superficies táctiles artificiales, formadas por sensores piezorresistivos.

  16. Aprendizaje temprano de arquitectura sustentable mediante vistas interiores graduadas

    Adriana Edith Granero

    2014-06-01

    Full Text Available Lograr una arquitectura sustentable requiere, entre otros aspectos, incorporar consideraciones energéticas en etapas tempranas de los diseños arquitectónicos. Las definiciones ambientales involucran principalmente análisis numéricos y temporales, con un detalle de variables normalmente definidas en etapas avanzadas del trabajo proyectual, distantes de las resoluciones espaciales de la gestación inicial del diseño, especialmente durante el comienzo de la formación profesional. Se puede aplicar estos conocimientos técnicos en los alumnos, en etapas tempranas del proyecto, según las teorías de aprendizaje significativo y percepción, que sugieren capacidades de vinculación cognitiva, mediante tecnologías de información y simulaciones gráficas. Este artículo propone una secuencia de experiencias pedagógicas de integración, a partir de modelos para la resolución conjunta del diseño arquitectónico, que se enfoca en la elaboración de vistas espaciales graduadas según valores energéticos. Ello se ejemplifica con el dimensionamiento de vanos para iluminación natural en un recinto doméstico de trabajo, lo cual se relaciona con la privacidad y la visión exterior, como también con la comodidad y el consumo energético. El proceso se ensaya con grupos de estudiantes de arquitectura y a través de consultas con docentes y especialistas del área que reconocen una motivación significativa y de relación ambiental. Esta experiencia de integración gráfica implica una vinculación temprana de condiciones energéticas y espaciales, utilizable para la enseñanza y posterior desempeño profesional, que busca una arquitectura expresiva y ambientalmente responsable.

  17. Desarrollo de la lectura mediante estratégias integradoras

    Solé, Maira

    2005-06-01

    Full Text Available La lectura y la escritura son procesos que cada día ameritan nuevos cambios y transformaciones. La propuesta de un Proyecto Pedagógico Integrador, (Fraca 2003 desarrollado con éxito en algunas instituciones venezolanas, se perfila como una alternativa significativa para el desarrollo de estos elementos. La idea o núcleo central es la integración de las diferentes asignaturas curriculares y lograr una globalización partiendo de sus objetivos y contenidos programáticos. El eje pedagógico integrador le permite al docente, evidenciar con mayor prontitud los resultados mediante actividades prácticas de lectura y escritura. Así mismo combina elementos claves del aprendizaje ausbeliano: información previa, información nueva y construcción de la información definitiva o integrada. La puesta en ejecución de las estrategias integradoras, en esta ocasión por maestros en formación (UNEG, a diferentes niños de escuelas del Estado Bolívar (Venezuela, certificando cómo la lectura y la escritura pueden tener un espacio ideal y significativo en la instrucción actual. Solo se necesita la intención, creatividad, dinamismo e ingenio. The reading and the writing plows processes that every day they require new changes and transformations. The proposal of an Integrative Pedagogic Project, (Fraca 2003 developed with success in some Venezuelan institutions; it is profiled like a significant alternative for the development of these elements. The idea or central nucleus is the integration of the different curricular subjects and to achieve a globalization leaving of its objectives and programmatic contents. The integrative pedagogic axis allows to the educational one, to evidence with more readiness the results by means of practical activities of reading and it notarizes. Likewise it combines key elements of the learning ausbeliano: previous information, new information and construction of the definitive or integrated information. The operation of

  18. Semiconductor sensors

    Hartmann, Frank

    2011-01-01

    Semiconductor sensors have been around since the 1950s and today, every high energy physics experiment has one in its repertoire. In Lepton as well as Hadron colliders, silicon vertex and tracking detectors led to the most amazing physics and will continue doing so in the future. This contribution tries to depict the history of these devices exemplarily without being able to honor all important developments and installations. The current understanding of radiation damage mechanisms and recent R and D topics demonstrating the future challenges and possible technical solutions for the SLHC detectors are presented. Consequently semiconductor sensor candidates for an LHC upgrade and a future linear collider are also briefly introduced. The work presented here is a collage of the work of many individual silicon experts spread over several collaborations across the world.

  19. Load sensor

    Van den Ende, D.; Almeida, P.M.R.; Dingemans, T.J.; Van der Zwaag, S.

    2007-01-01

    The invention relates to a load sensor comprising a polymer matrix and a piezo-ceramic material such as PZT, em not bedded in the polymer matrix, which together form a compos not ite, wherein the polymer matrix is a liquid crystalline resin, and wherein the piezo-ceramic material is a PZT powder forming 30-60% by volume of the composite, and wherein the PZT powder forms 40-50% by volume of the composite.

  20. Image Sensor

    Jerram, Paul; Stefanov, Konstantin

    2017-01-01

    An image sensor of the type for providing charge multiplication by impact ionisation has plurality of multiplication elements. Each element is arranged to receive charge from photosensitive elements of an image area and each element comprises a sequence of electrodes to move charge along a transport path. Each of the electrodes has an edge defining a boundary with a first electrode, a maximum width across the charge transport path and a leading edge that defines a boundary with a second elect...

  1. Optischer Sensor

    Brandenburg, A.; Fischer, A.

    1995-01-01

    An optical sensor (1) comprising an integrated optical arrangement has a waveguide (4) and at least one defraction grating (5) arranged in this waveguide. Light can launched into the waveguide via the defraction grating. In the reflection area of defraction grating, part of the light is dispersed through the waveguide at the beam angle for which the launch conditions and thus the defraction in the waveguide are fulfilled, so that, at this angle, a dark line (14) occurs whose position is evalu...

  2. Gas sensor

    Dorogan, V.; Korotchenkov, Gh.; Vieru, T.; Prodan, I.

    2003-01-01

    The invention relates to the gas sensors on base of metal-oxide films (SnO, InO), which may be used for enviromental control, in the fireextinguishing systema etc. The gas includes an insulating substrate, an active layer, a resistive layer with ohmic contacts. The resistive layer has two or more regions with dofferent resistances , and on the active layer are two or more pairs of ohmic contacts

  3. AGRICULTURIZACION E IMPACTOS AMBIENTALES EN EL PARTIDO DE NECOCHEA, PROVINCIA DE BUENOS AIRES, ARGENTINA - AGRICULTURIZATION AND ENVIRONMENTAL IMPACTS IN NECOCHEA COUNTY, BUENOS AIRES, ARGENTINA

    Patricia Vazquez; Laura Zulaica; Belen Benavidez

    2017-01-01

    El modelo actual de producción agropecuaria de la región pampeana argentina, ha mostrado una tendencia a la agriculturización, con un efecto directo sobre la dinámica de los agroecosistemas, generando impactos ambientales con consecuencias sobre la base de los recursos naturales. Tomando el partido de Necochea inserto en la región, esta investigación propone analizar los cambios en el uso del suelo en dicho Partido entre 2003-2011, mediante sensores remotos, y estimar los impactos ambientales...

  4. Intrusion detection sensors

    Williams, J.D.

    1978-07-01

    Intrusion detection sensors are an integral part of most physical security systems. Under the sponsorship of the U.S. Department of Energy, Office of Safeguards and Security, Sandia Laboratories has conducted a survey of available intrusion detection sensors and has tested a number of different sensors. An overview of these sensors is provided. This overview includes (1) the operating principles of each type of sensor, (2) unique sensor characteristics, (3) desired sensor improvements which must be considered in planning an intrusion detection system, and (4) the site characteristics which affect the performance of both exterior and interior sensors. Techniques which have been developed to evaluate various intrusion detection sensors are also discussed

  5. Hydrogen sensor

    Duan, Yixiang; Jia, Quanxi; Cao, Wenqing

    2010-11-23

    A hydrogen sensor for detecting/quantitating hydrogen and hydrogen isotopes includes a sampling line and a microplasma generator that excites hydrogen from a gas sample and produces light emission from excited hydrogen. A power supply provides power to the microplasma generator, and a spectrometer generates an emission spectrum from the light emission. A programmable computer is adapted for determining whether or not the gas sample includes hydrogen, and for quantitating the amount of hydrogen and/or hydrogen isotopes are present in the gas sample.

  6. Ensayo no destructivo de soldaduras en pernos conectores mediante inspección acústica

    Aznar, A.; Cervera, J.; Ortiz, J.; Hernando, J. I.

    2012-01-01

    Los pernos conectores aportan múltiples ventajas de uso, entre las que se encuentra el elevado margen de seguridad que ofrecen sus soldaduras ejecutadas mediante arco eléctrico. Estas soldaduras, aunque ampliamente fiables, son difícilmente comprobadas mediante ensayos no destructivos. Aparte de la inspección visual, que aporta gran información sobre la calidad de ejecución de la soldadura, el resto de ensayos no destructivos (líquidos penetrantes, partículas magnéticas, ultrasonidos, radiogr...

  7. Modulación del crecimiento vertebral mediante electrocoagulación hemicircunferencial vertebral asistida

    Caballero García, Alberto

    2011-01-01

    Nuestro trabajo está basado en la posibilidad de controlar el desarrollo asimétrico de los cartílagos de crecimiento vertebral, mediante la realización de una fisiodesis hemivertebral, con electrocoagulación, videoasistida por toracoscópica. Se realizará en cinco niveles torácicos, con un abordaje anterior mínimamente invasivo. Por lo tanto, planteamos como hipótesis de trabajo que La destrucción de las fisis de crecimiento vertebral mediante electrocoagulación, videoasistida por vía toracosc...

  8. Modelado de un amortiguador magneto-reológico mediante EcosimPro

    Rodríguez Cadenas, Rubén

    2012-01-01

    El objetivo de este proyecto es la creación de una librería en la herramienta de modelado y simulación EcosimPro enfocada a amortiguadores magneto‐reológicos. El modelado y simulación mediante cualquier herramienta informática permite la obtención de datos y el desarrollo de componentes con un coste inferior al que habría que invertir mediante una experimentación real. Además, permite llevar el componente hasta el límite sin el riesgo de romperlo o dejarlo inutilizable. Por tanto, se puede de...

  9. Sensors for Entertainment.

    Lamberti, Fabrizio; Sanna, Andrea; Rokne, Jon

    2016-07-15

    Sensors are becoming ubiquitous in all areas of science, technology, and society. In this Special Issue on "Sensors for Entertainment", developments in progress and the current state of application scenarios for sensors in the field of entertainment is explored.

  10. Sensors for Entertainment

    Fabrizio Lamberti; Andrea Sanna; Jon Rokne

    2016-01-01

    Sensors are becoming ubiquitous in all areas of science, technology, and society. In this Special Issue on ?Sensors for Entertainment?, developments in progress and the current state of application scenarios for sensors in the field of entertainment is explored.

  11. Wireless sensor platform

    Joshi, Pooran C.; Killough, Stephen M.; Kuruganti, Phani Teja

    2017-08-08

    A wireless sensor platform and methods of manufacture are provided. The platform involves providing a plurality of wireless sensors, where each of the sensors is fabricated on flexible substrates using printing techniques and low temperature curing. Each of the sensors can include planar sensor elements and planar antennas defined using the printing and curing. Further, each of the sensors can include a communications system configured to encode the data from the sensors into a spread spectrum code sequence that is transmitted to a central computer(s) for use in monitoring an area associated with the sensors.

  12. ESTUDO COMPARATIVO ENTRE OS ÍNDICES NDVI OBTIDOS A PARTIR DOS SENSORES LANDSAT 5 - TM E RESOURCESAT - LISS III

    Cesar Vinícius Mendes Nery

    2013-07-01

    Full Text Available A importância das imagens de sensoriamento remoto para o monitoramento da cobertura vegetal é algo inegável. Por mais de três décadas a série Landsat tem fornecido imagens da terra, porém a partir de novembro de 2011 o satélite interrompeu a disponibilização de suas imagens para o monitoramento ambiental. Uma das alternativas de imagens ao Landsat têm sido as imagens do sensor LISS III a bordo do satélite indiano Resourcesat 1. O presente trabalho tem como área de estudo o município de Janaúba, por estar em uma área de transição de dois biomas, e o mesmo tem por objetivo comparar os dois sensores, o sensor TM que se encontra a bordo do satélite Landsat 5 e o sensor LISS III a bordo do satélite Resourcesat 1. Para esse estudo comparativo as imagens foram adquiridas do site do Instituto Nacional de Pesquisas Espaciais (INPE e seus valores de níveis digitais (ND foram convertidos em reflectância com correção atmosférica utilizando o método de correção DOS. Amostras de pixels das imagens índice foram coletadas para o estudo de correlação e ajuste de uma equação linear por meio da técnica de regressão. Utilizando a equação ajustada foram gerados dois mapas temáticos de ambos os sensores, sendo os mesmos comparados pelo teste estatístico Kappa. Os resultados mostraram uma forte correlação entre os valores de NDVI (0,81, sendo possível o ajuste de uma equação linear que expresse a forma dessa relação. O sensor TM, superestimou os valores de NDVI em relação ao sensor LISS III (Inclinação de 1,1035. O valor de Kappa para os mapas temáticos obtidos foi de 0,5894 e o índice de acerto foi de 98,81%, o que mostra uma boa similaridade entre eles. O sensor LISS III pode ser perfeitamente utilizado como alternativa ao Landsat 5.

  13. Método de eliminación de trihalometanos y/o contaminantes emergentes mediante plasma

    Erra Serrabasa, Pilar; Jover Comas, Eric; Molina Mansilla, Ricardo; Bertrán Serra, Enric; Bayona Termens, Josep María; Reyes Contreras, Carolina

    2009-01-01

    Método de eliminación de trihalometanos y/o contaminantes emergentes mediante plasma. Se describe un método de eliminación de trihalometanos y contaminantes refractarios en medios acuosos mediante la aplicación directa de plasma para conseguir la degradación de los compuestos contaminantes presentes en el agua.

  14. Establecer las condiciones necesarias para procesar materiales termoestables mediante el rotomoldeo

    Pérez O., Daniel

    2009-01-01

    En este trabajo se establecieron las condiciones necesarias para procesar materiales termoestables mediante la técnica de rotomoldeo, comenzando por el estudio de las condiciones de curado y viscosidad relativa, donde se evidenció una relación directa del porcentaje de catalizador en función del tiempo y la temperatura de polimerización.

  15. A modular optical sensor

    Conklin, John Albert

    This dissertation presents the design of a modular, fiber-optic sensor and the results obtained from testing the modular sensor. The modular fiber-optic sensor is constructed in such manner that the sensor diaphragm can be replaced with different configurations to detect numerous physical phenomena. Additionally, different fiber-optic detection systems can be attached to the sensor. Initially, the modular sensor was developed to be used by university of students to investigate realistic optical sensors and detection systems to prepare for advance studies of micro-optical mechanical systems (MOMS). The design accomplishes this by doing two things. First, the design significantly lowers the costs associated with studying optical sensors by modularizing the sensor design. Second, the sensor broadens the number of physical phenomena that students can apply optical sensing techniques to in a fiber optics sensor course. The dissertation is divided into seven chapters covering the historical development of fiber-optic sensors, a theoretical overview of fiber-optic sensors, the design, fabrication, and the testing of the modular sensor developed in the course of this work. Chapter 1 discusses, in detail, how this dissertation is organized and states the purpose of the dissertation. Chapter 2 presents an historical overview of the development of optical fibers, optical pressure sensors, and fibers, optical pressure sensors, and optical microphones. Chapter 3 reviews the theory of multi-fiber optic detection systems, optical microphones, and pressure sensors. Chapter 4 presents the design details of the modular, optical sensor. Chapter 5 delves into how the modular sensor is fabricated and how the detection systems are constructed. Chapter 6 presents the data collected from the microphone and pressure sensor configurations of the modular sensor. Finally, Chapter 7 discusses the data collected and draws conclusions about the design based on the data collected. Chapter 7 also

  16. Modelo computacional para o gerenciamento de dados e exames de pacientes para o acompanhamento remoto por meio de conferência multimídia Computational model for data and patients' exams management for remote follow-up by multimedia conferences

    Huei Diana Lee

    2010-12-01

    Full Text Available OBJETIVO: Desenvolver um modelo computacional para aquisição, gerenciamento e armazenamento de dados e exames de pacientes, e definir uma arquitetura de conferência multimídia para o acompanhamento remoto de exames. MATERIAIS E MÉTODOS: Definiu-se uma arquitetura computacional para a aquisição de exames a partir de equipamentos hospitalares, e para o armazenamento e gerenciamento de dados e exames de pacientes foram utilizados o servidor de aplicações Jboss, o sistema gerenciador de banco de dados MySQL, o servidor de páginas Apache e o framework Jboss-Seam para o desenvolvimento de aplicações. Para a conferência multimídia, foi aplicado um estudo de caso utilizando a arquitetura Openmeetings. RESULTADOS: Foram definidos modelos computacionais para o gerenciamento consistente e seguro de dados e exames de pacientes e estudou-se uma arquitetura para conferência multimídia. CONCLUSÃO: Os modelos computacionais, o protótipo implementado e a arquitetura de conferência multimídia avaliada poderão ser aplicados em situações reais da área médica, contribuindo para o acompanhamento remoto de pacientes.OBJECTIVE: To develop a computational model for acquisition, management and storing data and patients' exams, and to define a multimedia conference architecture to remote patients' follow-up. MATERIALS AND METHODS: A computational architecture was defined to acquire exams' information from hospital equipment and to store and manage patients' data and exams using the JBoss application server, the MySql database manager system, the Apache web page server and the Jboss Seam framework for application development. For multimedia conference, a case study using the Openmeetins architecture was performed. RESULTS: computational models intended to the consistent and safe management of data and patients' exams were defined and a multimedia conference architecture was studied. CONCLUSION: The computational models, the prototype developed and

  17. Integrated cryogenic sensors

    Juanarena, D.B.; Rao, M.G.

    1991-01-01

    Integrated cryogenic pressure-temperature, level-temperature, and flow-temperature sensors have several advantages over the conventional single parameter sensors. Such integrated sensors were not available until recently. Pressure Systems, Inc. (PSI) of Hampton, Virginia, has introduced precalibrated precision cryogenic pressure sensors at the Los Angeles Cryogenic Engineering Conference in 1989. Recently, PSI has successfully completed the development of integrated pressure-temperature and level-temperature sensors for use in the temperature range 1.5-375K. In this paper, performance characteristics of these integrated sensors are presented. Further, the effects of irradiation and magnetic fields on these integrated sensors are also reviewed

  18. EDITORIAL: Humidity sensors Humidity sensors

    Regtien, Paul P. L.

    2012-01-01

    produced at relatively low cost. Therefore, they find wide use in lots of applications. However, the method requires a material that possesses some conflicting properties: stable and reproducible relations between air humidity, moisture uptake and a specific property (for instance the length of a hair, the electrical impedance of the material), fast absorption and desorption of the water vapour (to obtain a short response time), small hysteresis, wide range of relative humidity (RH) and temperature-independent output (only responsive to RH). For these reasons, much research is done and is still going on to find suitable materials that combine high performance and low price. In this special feature, three of the four papers report on absorption sensors, all with different focus. Aziz et al describe experiments with newly developed materials. The surface structure is extensively studied, in view of its ability to rapidly absorb water vapour and exhibit a reproducible change in the resistance and capacitance of the device. Sanchez et al employ optical fibres coated with a thin moisture-absorbing layer as a sensitive humidity sensor. They have studied various coating materials and investigated the possibility of using changes in optical properties of the fibre (here the lossy mode resonance) due to a change in humidity of the surrounding air. The third paper, by Weremczuk et al, focuses on a cheap fabrication method for absorption-based humidity sensors. The inkjet technology appears to be suitable for mass fabrication of such sensors, which is demonstrated by extensive measurements of the electrical properties (resistance and capacitance) of the absorbing layers. Moreover, they have developed a model that describes the relation between humidity and the electrical parameters of the moisture-sensitive layer. Despite intensive research, absorption sensors still do not meet the requirements for high accuracy applications. The dew-point temperature method is more appropriate

  19. Sensor Virtual Adaptable de Concentración de Etanol para Fermentadores Industriales

    Boris Martínez

    2009-07-01

    Full Text Available Resumen: Los sistemas de control emplean sensores para observar el estado del proceso y tomar decisiones. En ocasiones, se necesita estimar las variables del proceso pues el sensor adecuado no existe, es prohibitivamente costoso o las mediciones son difíciles de realizar. Una solución consiste en inferir las variables no medidas a partir de otras variables mediante sensores virtuales o sensores por software (soft-sensors. En los procesos de fermentación alcohólica, la medición de la concentración del etanol es esencial. Sin embargo, no existen sensores baratos y confiables para medirla en línea ni existe una solución aceptada por todos del modelado de dicha variable. Además, las fermentaciones nunca son iguales pues los microorganismos son muy sensibles a pequeñas desviaciones en las variables involucradas. Por tanto, estos procesos requieren un sistema de estimación adaptable y altamente robusto. En este trabajo se presenta un sensor virtual adaptable para un proceso fermentativo de bioetanol empleando un modelo borroso evolutivo a partir de datos del proceso. Además, el modelo obtenido es compacto y presenta una estructura adecuada para su aplicación futura en estrategias de control, en aras de optimizar la productividad del proceso y disminuir los costos de producción. Palabras clave: bioetanol, procesos fermentativos, sensores virtuales o sensores software, sistemas adaptables, sistemas borrosos

  20. Application Of FA Sensor 2

    Park, Seon Ho

    1993-03-01

    This book introduces FA sensor from basic to making system, which includes light sensor like photo diode and photo transistor, photo electricity sensor, CCD type image sensor, MOS type image sensor, color sensor, cds cell, and optical fiber scope. It also deals with direct election position sensor such as proximity switch, differential motion, linear scale of photo electricity type, and magnet scale, rotary sensor with summary of rotary encoder, rotary encoder types and applications, flow sensor, and sensing technology.

  1. Sensors an introductory course

    Kalantar-zadeh, Kourosh

    2013-01-01

    Sensors: An Introductory Course provides an essential reference on the fundamentals of sensors. The book is designed to help readers in developing skills and the understanding required in order to implement a wide range of sensors that are commonly used in our daily lives. This book covers the basic concepts in the sensors field, including definitions and terminologies. The physical sensing effects are described, and devices which utilize these effects are presented. The most frequently used organic and inorganic sensors are introduced and the techniques for implementing them are discussed. This book: Provides a comprehensive representation of the most common sensors and can be used as a reference in relevant fields Presents learning materials in a concise and easy to understand manner Includes examples of how sensors are incorporated in real life measurements Contains detailed figures and schematics to assist in understanding the sensor performance Sensors: An Introductory Course is ideal for university stu...

  2. Coupled wave sensor technology

    Maki, M.C.

    1988-01-01

    Buried line guided radar sensors have been used successfully for a number of years to provide perimeter security for high value resources. This paper introduces a new complementary sensor advancement at Computing Devices termed 'coupled wave device technology' (CWD). It provides many of the inherent advantages of leakey cable sensors, such as terrain-following and the ability to discriminate between humans and small animals. It also is able to provide a high or wide detection zone, and allows the sensor to be mounted aerially and adjacent to a wall or fence. Several alternative sensors have been developed which include a single-line sensor, a dual-line hybrid sensor that combines the elements of ported coax and CWD technology, and a rapid-deployment portable sensor for temporary or mobile applications. A description of the technology, the sensors, and their characteristics is provided

  3. Smart Optoelectronic Sensors and Intelligent Sensor Systems

    Sergey Y. YURISH

    2012-03-01

    Full Text Available Light-to-frequency converters are widely used in various optoelectronic sensor systems. However, a further frequency-to-digital conversion is a bottleneck in such systems due to a broad frequency range of light-to-frequency converters’ outputs. This paper describes an effective OEM design approach, which can be used for smart and intelligent sensor systems design. The design is based on novel, multifunctional integrated circuit of Universal Sensors & Transducers Interface especially designed for such sensor applications. Experimental results have confirmed an efficiency of this approach and high metrological performances.

  4. Programación por metas Energía alternativa mediante biomasa.

    Guerrero Casas, Flor María

    2003-01-01

    Full Text Available En este trabajo se presenta un modelo multicriterio de localización de centrales de generación de energía eléctrica mediante biomasa. Los objetivos considerados son: (1 minimizar el coste total de la operación, (2 maximizar la producción de electricidad obtenida, (3 maximizar la distancia entre plantas, (4 maximizar la aceptación social y (5 establecer las plantas o ampliaciones en aquellos lugares donde exista una mayor predisposición por parte de las administraciones locales. Finalmente, se concluye con una aplicación práctica mediante programación por metas ponderadas para la región andaluza, considerando los residuos procedentes del olivar como fuente de energía.

  5. Towards Sensor Database Systems

    Bonnet, Philippe; Gehrke, Johannes; Seshadri, Praveen

    2001-01-01

    . These systems lack flexibility because data is extracted in a predefined way; also, they do not scale to a large number of devices because large volumes of raw data are transferred regardless of the queries that are submitted. In our new concept of sensor database system, queries dictate which data is extracted...... from the sensors. In this paper, we define the concept of sensor databases mixing stored data represented as relations and sensor data represented as time series. Each long-running query formulated over a sensor database defines a persistent view, which is maintained during a given time interval. We...... also describe the design and implementation of the COUGAR sensor database system....

  6. Flexible magnetoimpedance sensor

    Li, Bodong; Kavaldzhiev, Mincho; Kosel, Jü rgen

    2015-01-01

    Flexible magnetoimpedance (MI) sensors fabricated using a NiFe/Cu/NiFe tri-layer on Kapton substrate have been studied. A customized flexible microstrip transmission line was employed to investigate the MI sensors's magnetic field and frequency

  7. Air Sensor Toolbox

    Air Sensor Toolbox provides information to citizen scientists, researchers and developers interested in learning more about new lower-cost compact air sensor technologies and tools for measuring air quality.

  8. Invisible magnetic sensors

    Mach-Batlle, Rosa; Navau, Carles; Sanchez, Alvaro

    2018-04-01

    Sensing magnetic fields is essential in many applications in biomedicine, transportation, or smart cities. The distortion magnetic sensors create in response to the field they are detecting may hinder their use, for example, in applications requiring dense packaging of sensors or accurately shaped field distributions. For sensing electromagnetic waves, cloaking shells that reduce the scattering of sensors have been introduced. However, the problem of making a magnetic sensor undetectable remains unsolved. Here, we present a general strategy on how to make a sensor magnetically invisible while keeping its ability to sense. The sensor is rendered undetectable by surrounding it with a spherical shell having a tailored magnetic permeability. Our method can be applied to arbitrary shaped magnetic sensors in arbitrary magnetic fields. The invisibility can be made exact when the sensor is spherical and the probed field is uniform. A metasurface composed of superconducting pieces is presented as a practical realization of the ideal invisibility shell.

  9. Embedded sensor systems

    Agrawal, Dharma Prakash

    2017-01-01

    This inspiring textbook provides an introduction to wireless technologies for sensors, explores potential use of sensors for numerous applications, and utilizes probability theory and mathematical methods as a means of embedding sensors in system design. It discusses the need for synchronization and underlying limitations, inter-relation between given coverage and connectivity to number of sensors needed, and the use of geometrical distance to determine location of the base station for data collection and explore use of anchor nodes for relative position determination of sensors. The book explores energy conservation, communication using TCP, the need for clustering and data aggregation, and residual energy determination and energy harvesting. It covers key topics of sensor communication like mobile base stations and relay nodes, delay-tolerant sensor networks, and remote sensing and possible applications. The book defines routing methods and do performance evaluation for random and regular sensor topology an...

  10. Sensor Substrate Development

    National Aeronautics and Space Administration — Novel substrates, such as aerogels and porous, low density ceramics may increase the sensitivities of chemical reaction-based sensors for toxic vapors. These sensors...

  11. Digital Sensor Technology

    Ted Quinn; Jerry Mauck; Richard Bockhorst; Ken Thomas

    2013-07-01

    The nuclear industry has been slow to incorporate digital sensor technology into nuclear plant designs due to concerns with digital qualification issues. However, the benefits of digital sensor technology for nuclear plant instrumentation are substantial in terms of accuracy, reliability, availability, and maintainability. This report demonstrates these benefits in direct comparisons of digital and analog sensor applications. It also addresses the qualification issues that must be addressed in the application of digital sensor technology.

  12. Focus on image sensors

    Jos Gunsing; Daniël Telgen; Johan van Althuis; Jaap van de Loosdrecht; Mark Stappers; Peter Klijn

    2013-01-01

    Robots need sensors to operate properly. Using a single image sensor, various aspects of a robot operating in its environment can be measured or monitored. Over the past few years, image sensors have improved a lot: frame rate and resolution have increased, while prices have fallen. As a result,

  13. Multi-Sensor Architectures

    Hussain, Dil Muhammad Akbar; Ahmed, Zaki; Khan, M. Z.

    2012-01-01

    The use of multiple sensors typically requires the fusion of data from different type of sensors. The combined use of such a data has the potential to give an efficient, high quality and reliable estimation. Input data from different sensors allows the introduction of target attributes (target ty...

  14. Thermal flow micro sensors

    Elwenspoek, Michael Curt

    1999-01-01

    A review is given on sensors fabricated by silicon micromachining technology using the thermal domain for the measurement of fluid flow. Attention is paid especially to performance and geometry of the sensors. Three basic types of thermal flow sensors are discussed: anemometers, calorimetric flow

  15. Sensors for Entertainment

    Fabrizio Lamberti

    2016-07-01

    Full Text Available Sensors are becoming ubiquitous in all areas of science, technology, and society. In this Special Issue on “Sensors for Entertainment”, developments in progress and the current state of application scenarios for sensors in the field of entertainment is explored.

  16. Electric field sensor studies

    Griffith, R.D.; Parks, S.

    1977-01-01

    Above-ground intrusion sensors are reviewed briefly. Buried wire sensors are next considered; feasibility studies were conducted. A triangular system of an overhead transmitter wire exciting two buried sensor wires was developed and tested. It failed sometimes to detect a man making a broad jump. A differential receiver was developed to solve this problem

  17. Virtual Sensor Test Instrumentation

    Wang, Roy

    2011-01-01

    Virtual Sensor Test Instrumentation is based on the concept of smart sensor technology for testing with intelligence needed to perform sell-diagnosis of health, and to participate in a hierarchy of health determination at sensor, process, and system levels. A virtual sensor test instrumentation consists of five elements: (1) a common sensor interface, (2) microprocessor, (3) wireless interface, (4) signal conditioning and ADC/DAC (analog-to-digital conversion/ digital-to-analog conversion), and (5) onboard EEPROM (electrically erasable programmable read-only memory) for metadata storage and executable software to create powerful, scalable, reconfigurable, and reliable embedded and distributed test instruments. In order to maximize the efficient data conversion through the smart sensor node, plug-and-play functionality is required to interface with traditional sensors to enhance their identity and capabilities for data processing and communications. Virtual sensor test instrumentation can be accessible wirelessly via a Network Capable Application Processor (NCAP) or a Smart Transducer Interlace Module (STIM) that may be managed under real-time rule engines for mission-critical applications. The transducer senses the physical quantity being measured and converts it into an electrical signal. The signal is fed to an A/D converter, and is ready for use by the processor to execute functional transformation based on the sensor characteristics stored in a Transducer Electronic Data Sheet (TEDS). Virtual sensor test instrumentation is built upon an open-system architecture with standardized protocol modules/stacks to interface with industry standards and commonly used software. One major benefit for deploying the virtual sensor test instrumentation is the ability, through a plug-and-play common interface, to convert raw sensor data in either analog or digital form, to an IEEE 1451 standard-based smart sensor, which has instructions to program sensors for a wide variety of

  18. Discriminación de coberturas del suelo usando datos espectrales multi-angulares del sensor polder-1: alcances y limitaciones

    Fernando Paz Pellat

    2016-04-01

    Full Text Available La información espectral multi-angular (visión de un píxel desde diferentes ángulos de visión y con ángulos de iluminación solar diferentes obtenida de sensores remotos tiene potencial para una discriminación adecuada de clases de coberturas del suelo. De acuerdo con varios esfuerzos realizados para poder analizar la capacidad de discriminación de las clases de cobertura del suelo, se introduce un marco teórico-conceptual para el análisis de la información espectral, angular y temporal (tamaño de píxel fijo. En este trabajo se explora el uso del sensor POLDER-1. La base de datos fue analizada ajustando un modelo de la función de distribución bidireccional de las reflectancias (BRDF en las bandas espectrales disponibles, para diferentes clases de cobertura del suelo del sistema GLC2000. Los resultados experimentales muestran adecuados ajustes a nivel de píxeles y datos diarios. Con los parámetros ajustados del modelo de la BRDF se analizó el potencial de discriminación usando espacios espectrales de las bandas de la región del rojo e infrarrojo cercano, utilizando diferentes resoluciones temporales y espaciales (agrupación de píxeles. Los resultados mostraron alta confusión (traslapes de posición en espacios espectrales, detectándose limitaciones de dichos enfoques para el caso de confusiones debidas a mezclas de clases o causadas por la dinámica temporal de las mismas. Al final se define un esquema para aproximar la clasificación de la vegetación al acoplar la información disponible en los sensores ópticos y las clases que pueden ser discriminadas.

  19. Hydrostatic force sensor

    Evans, M.S.; Stoughton, R.S.; Kazerooni, H.

    1994-08-01

    This paper presents a theoretical and experimental investigation of a new kind of force sensor which detects forces by measuring an induced pressure change in a material of large Poisson's ratio. In this investigation we develop mathematical expressions for the sensor's sensitivity and bandwidth, and show that its sensitivity can be much larger and its bandwidth is usually smaller than those of existing strain-gage-type sensors. This force sensor is well-suited for measuring large but slowly varying forces. It can be installed in a space smaller than that required by existing sensors

  20. Multifuctional integrated sensors (MFISES).

    Homeijer, Brian D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Roozeboom, Clifton [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-10-01

    Many emerging IoT applications require sensing of multiple physical and environmental parameters for: completeness of information, measurement validation, unexpected demands, improved performance. For example, a typical outdoor weather station measures temperature, humidity, barometric pressure, light intensity, rainfall, wind speed and direction. Existing sensor technologies do not directly address the demand for cost, size, and power reduction in multi-paramater sensing applications. Industry sensor manufacturers have developed integrated sensor systems for inertial measurements that combine accelerometers, gyroscopes, and magnetometers, but do not address environmental sensing functionality. In existing research literature, a technology gap exists between the functionality of MEMS sensors and the real world applications of the sensors systems.

  1. Sensor mount assemblies and sensor assemblies

    Miller, David H [Redondo Beach, CA

    2012-04-10

    Sensor mount assemblies and sensor assemblies are provided. In an embodiment, by way of example only, a sensor mount assembly includes a busbar, a main body, a backing surface, and a first finger. The busbar has a first end and a second end. The main body is overmolded onto the busbar. The backing surface extends radially outwardly relative to the main body. The first finger extends axially from the backing surface, and the first finger has a first end, a second end, and a tooth. The first end of the first finger is disposed on the backing surface, and the tooth is formed on the second end of the first finger.

  2. Wireless Biological Electronic Sensors.

    Cui, Yue

    2017-10-09

    The development of wireless biological electronic sensors could open up significant advances for both fundamental studies and practical applications in a variety of areas, including medical diagnosis, environmental monitoring, and defense applications. One of the major challenges in the development of wireless bioelectronic sensors is the successful integration of biosensing units and wireless signal transducers. In recent years, there are a few types of wireless communication systems that have been integrated with biosensing systems to construct wireless bioelectronic sensors. To successfully construct wireless biological electronic sensors, there are several interesting questions: What types of biosensing transducers can be used in wireless bioelectronic sensors? What types of wireless systems can be integrated with biosensing transducers to construct wireless bioelectronic sensors? How are the electrical sensing signals generated and transmitted? This review will highlight the early attempts to address these questions in the development of wireless biological electronic sensors.

  3. MEMS optical sensor

    2013-01-01

    The present invention relates to an all-optical sensor utilizing effective index modulation of a waveguide and detection of a wavelength shift of reflected light and a force sensing system accommodating said optical sensor. One embodiment of the invention relates to a sensor system comprising...... at least one multimode light source, one or more optical sensors comprising a multimode sensor optical waveguide accommodating a distributed Bragg reflector, at least one transmitting optical waveguide for guiding light from said at least one light source to said one or more multimode sensor optical...... waveguides, a detector for measuring light reflected from said Bragg reflector in said one or more multimode sensor optical waveguides, and a data processor adapted for analyzing variations in the Bragg wavelength of at least one higher order mode of the reflected light....

  4. Estudo do Fenômeno da Ilha de Calor na Cidade de Manaus/AM: Um Estudo a Partir de Dados de Sensoriamento Remoto, Modelagem e Estações Meteorológicas

    Polari Batista Corrêa

    2016-06-01

    Full Text Available Resumo O fenômeno da ilha de calor (IC na cidade de Manaus foi estudado usando dados de modelagem do clima urbano com o modelo Weather Research and Forecasting (WRF e dados de estações meteorológicas. Foram usados os dados de temperatura da superfície (TS obtidos pelo sensor MODIS do satélite ambiental Aqua, produto MYD11A2 na resolução horizontal de 1 km por um 1 km para o período de 2002 a 2012 na cidade de Manaus para avaliar o processo de urbanização. Foi realizado um estudo de caso com as simulações de TS e de temperatura do ar (TA nos meses de agosto e setembro de 2009 que foram comparadas, respectivamente, com os dados de satélite e de estações meteorológicas. Identificou-se a distribuição espacial da TS na cidade, e as diferenças de TS entre a área urbana e a de floresta e entre a área urbana e de rios foram quantificadas. As diferenças de TS ao longo das faixas de longitude de 60,03° O a 59,97° O e de latitude de 3,09° S a −3,03° S foram analisadas com os dados do modelo WRF e do sensor MODIS. A intensidade da IC estimada com os dados de TA do modelo e de estações meteorológicas foram, em média, respectivamente de 1,87 °C e de 1,80 °C, consistentes com resultados anteriores. Portanto, a TA simulada pode ser usada para fins de estimar a intensidade da IC em Manaus.

  5. Digital Sensor Technology

    Thomas, Ken D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Quinn, Edward L. [Technology Resources, Dana Point, CA (United States); Mauck, Jerry L. [Technology Resources, Dana Point, CA (United States); Bockhorst, Richard M. [Technology Resources, Dana Point, CA (United States)

    2015-02-01

    The nuclear industry has been slow to incorporate digital sensor technology into nuclear plant designs due to concerns with digital qualification issues. However, the benefits of digital sensor technology for nuclear plant instrumentation are substantial in terms of accuracy and reliability. This paper, which refers to a final report issued in 2013, demonstrates these benefits in direct comparisons of digital and analog sensor applications. Improved accuracy results from the superior operating characteristics of digital sensors. These include improvements in sensor accuracy and drift and other related parameters which reduce total loop uncertainty and thereby increase safety and operating margins. An example instrument loop uncertainty calculation for a pressure sensor application is presented to illustrate these improvements. This is a side-by-side comparison of the instrument loop uncertainty for both an analog and a digital sensor in the same pressure measurement application. Similarly, improved sensor reliability is illustrated with a sample calculation for determining the probability of failure on demand, an industry standard reliability measure. This looks at equivalent analog and digital temperature sensors to draw the comparison. The results confirm substantial reliability improvement with the digital sensor, due in large part to ability to continuously monitor the health of a digital sensor such that problems can be immediately identified and corrected. This greatly reduces the likelihood of a latent failure condition of the sensor at the time of a design basis event. Notwithstanding the benefits of digital sensors, there are certain qualification issues that are inherent with digital technology and these are described in the report. One major qualification impediment for digital sensor implementation is software common cause failure (SCCF).

  6. HEAT Sensor: Harsh Environment Adaptable Thermionic Sensor

    Limb, Scott J. [Palo Alto Research Center, Palo Alto, CA (United States)

    2016-05-31

    This document is the final report for the “HARSH ENVIRONMENT ADAPTABLE THERMIONIC SENSOR” project under NETL’s Crosscutting contract DE-FE0013062. This report addresses sensors that can be made with thermionic thin films along with the required high temperature hermetic packaging process. These sensors can be placed in harsh high temperature environments and potentially be wireless and self-powered.

  7. Gluteoplastia tridimensional mediante distribución volumétrica precisa

    R. Alfonso Vallarta-Rodríguez

    Full Text Available Introducción y objetivo. La gluteoplastia mediante lipoinyección debe ser una cirugía segura que partiendo de una planificación adecuada, permita un aumento moderado enfatizando contornos y mejorando la forma natural de la región glútea. Debe permitir obtener resultados predecibles, duraderos y reproducibles, además de ser aplicable en una amplia variedad de pacientes. Presentamos un método de gluteoplastia de aumento sistematizada con lipoinyección que además de ser reproducible, permite obtener resultados consistentes, naturales y permanentes, distribuyendo estratégicamente volúmenes en cuadrantes. Pacientes y Método. Con mínima manipulación del lipoaspirado, infiltramos cantidades controladas en 9 cuadrantes en cada nalga. El cuadrante central representa la zona de máxima proyección y recibe la mitad del volumen. Denominamos zonas primarias a los 4 cuadrantes en los ejes X-Y, zonas que reciben el 40% del volumen infiltrado. Las zonas secundarias o menores corresponden a los cuadrantes situados entre los cuadrantes principales, y reciben el 10% del volumen total. Resultados. Entre 2008 y 2013 intervenimos a 75 pacientes para aumento y remodelación de glúteos con la técnica descrita, todas mujeres de 24 a 52 años. Las pacientes presentaron una convalecencia favorable y una satisfacción del 93%. Nueve pacientes presentaron seromas que se resolvieron mediante aspiración en consultorio. No se presentaron complicaciones mayores. Conclusiones. Presentamos un método de remodelación glútea mediante lipoinyección que, además de ofrecer excelentes resultados, predecibles, consistentes, naturales y permanentes, es lógico y reproducible.

  8. Desempeño de sensores de campo electrostático en sistemas de alerta de tormentas

    Aranguren Fino, Harby Daniel

    2011-01-01

    Esta tesis presenta un estudio operacional y científico de sensores de campo electrostático mediante el análisis de tormentas eléctricas en tres lugares: Colombia (2010), usando una estación de medida en Bogotá; Florida - EE.UU (2009), usando 31 sensores en el Kennedy Space Center - KSC y Navarra - España (2010), con 11 molinos de campo en parques eólicos. En total se analizaron cerca de 67000 medidas de variaciones de campo eléctrico producidas por rayos. En cada sitio se uso adicionalmente ...

  9. Control de la mano robot Inmoov-SR mediante casco NeuroSky Mindset

    Hernández Martínez, Antonio

    2017-01-01

    En este trabajo el objetivo es conseguir controlar los movimientos de apertura y cierre de la mano robot InMoov-SR conectada al brazo IRB120 de ABB mediante señales EEG, recogidas por medio del casco NeuroSky Mindset. Las señales son recogidas cuando el sujeto está en estado basal y cuando realiza movimiento con su mano y son procesadas con la ayuda de Matlab para de esta manera conseguir establecer las señales de control necesarias para activar la apertura o el cierre de la mano. Final...

  10. Protocolo de comunicación trabajador-robot mediante imágenes

    Castilla Berduque, José Angel

    2015-01-01

    La idea del proyecto viene del concepto de “fábricas del futuro”, donde las barreras entre robots y humanos se rompen para que la colaboración entre ambos sea como en un equipo. Para la realización de este proyecto se ha utilizado el brazo robótico IRB120 de la marca ABB de 6 Grados de libertad, Matlab y el software Robot Studio. El Objetivo principal de este proyecto es establecer el protocolo de comunicación trabajador-robot mediante imágenes. El trabajador debería poder ...

  11. Estudio mediante resonancia magnética de efectos pretransicionales en cristales líquidos

    Vaca Chavez, Fabián

    2002-01-01

    Tesis (Doctor en Física)--Universidad Nacional de Córdoba. Facultad de Matemática, Astronomía y Física, 2002. Se presenta el estudio mediante la técnica de Resonancia Magnética Nuclear de los efectos pretransicionales en diferentes fases de cristales líquidos termotrópicos y liotrópicos. Estos compuestos son materia de innumerables trabajos tanto teóricos como experimentales, debido a que son materiales extremadamente interesantes por sus aplicaciones tecnológicas, ópticas y biológicas. Se...

  12. Clasificación automática mediante la CDU con el procedimiento en cadena

    San Segundo Manuel, Rosa

    2002-01-01

    Actas de las I Jornadas de Tratamiento y Recuperación de Información (JOTRI), Valencia, España, 4-5 julio 2002 Se entiende por clasificación automática el proceso de agrupar según el contenido las referencias de los documentos o bien los propios documentos electróneos. Este proceso se realiza mediante programas capaces de comparar términos empleados utilizados en el documento. E incluso hay otras formas automáticas de clasificación que emplean procedimientos auto...

  13. Evaluacion de competencias mediante prácticas dirigidas sobre proyectos de edificación

    Castilla, Franciso; Castilla, Franciso; Sanz, David; González, Jesús; Pérez, Víctor

    2011-01-01

    La Búsqueda de herramientas eficaces para la evaluación de competencias transversales, comunes a diferentes asignaturas de un mismo plan de estudios, es uno de los pilares del nuevo Espacio Europeo de Educación Superior. El trabajo que aquí se presenta pretende mostrar las experiencias realizadas en primer curso del Grado en Ingeniería de Edificación en la Escuela Politécnica de Cuenca mediante prácticas dirigidas sobre edificios y proyectos de edificación. El objetivo principal es obtener...

  14. Control de costos mediante el análisis de valor ganado : caso aplicativo

    Prado Ponce, Eduard Javier; Prado Ponce, Eduard Javier; Prado Ponce, Eduard Javier

    2015-01-01

    El control de costos y el control de plazos son muy importantes ya que pueden dar como resultados informes que permitan aplicar planes correctivos e incluso preventivos si se analizan con suficiente antelación. Existen empresas que se dedican a la construcción de obras civiles, que actualmente carece de un proceso para la planificación y control en la ejecución de obra, debido a ello surge la necesidad de desarrollar una metodología que permita a la empresa optimizar sus recursos mediante ...

  15. Detección facial y reconocimiento anímico mediante las expresiones faciales

    BARTUAL GONZÁLEZ, RAQUEL

    2017-01-01

    The project is based on the software development elaborated with the program LabView. The mentioned program aims to detect people's faces in a video, as well as their genre and mood state. El proyecto se basa en el desarrollo de un software elaborado con el programa LabView. Dicho programa pretende detectar la cara de las personas en un vídeo, así como su género y su estado de ánimo. Bartual González, R. (2017). Detección facial y reconocimiento anímico mediante las expresiones faciales...

  16. Estabilización de Suelos mediante el empleo de Sales Cuaternarias

    Juan M. Junco del Pino

    2010-01-01

    El Mundo se dirige hacia el aprovechamiento de los Suelos mediante el desarrollo de nuevas técnicas y adaptarse a las condiciones del entorno resulta importante para la Ingeniería. El mejoramiento de los suelos abre nuevas posibilidades de ahorro que pueden llegar de 20 a 45 % respecto a los costos de construcción convencional. La Estabilización Química de Suelos consiste en el empleo de sustancias químicas con el objetivo de modificar las propiedades del suelo para hacerlo más denso o increm...

  17. Metalgoritmo de optimización combinatoria mediante la exploración de grafos.

    Pastor, Rafael

    1999-01-01

    Actualmente, aunque existen procedimientos específicos para resolver de forma óptima algunos problemas concretos de optimización combinatoria, la mayoría se deben solucionar con técnicas generales de exploración del espacio de soluciones, y más concretamente mediante procedimientos de exploración enumerativos en árboles y grafos de búsqueda.Se analizan los procedimientos de este tipo expuestos en la literatura, tanto en el área de la investigación operativa como en el de la inteligencia artif...

  18. Ensayo no destructivo de soldaduras en pernos conectores mediante inspección acústica

    Aznar, A.

    2012-09-01

    Full Text Available Headed studs are nowadays the standard steel-concrete connectors because of their competitive advantages. Firstly, they provide a high degree of safety thanks to semiautomatic electric arc welding. These welds are not suitable for typical non-destructive tests. The analytical study comprises several models. The first vibration modes have been obtained. The experimental research has developed first the measurement of the natural frequencies of 28 headed-studs in the sonic range. Then they have been tested by non-destructive and destructive tests. Finally theirs tests have been compared with their respective frequency measurements. A clear relationship between the measured frequencies and the lack of penetration of the welds has been established, that confirms the analytical prediction of this effect of the internal weld imperfections. Therefore, the feasibility of simple and absolutely non-destructive tests of welded studs by in site measurement of natural frequencies in the sonic range has been clearly established in this work.

    Los pernos conectores aportan múltiples ventajas de uso, entre las que se encuentra el elevado margen de seguridad que ofrecen sus soldaduras ejecutadas mediante arco eléctrico. Estas soldaduras, aunque ampliamente fiables, son difícilmente comprobadas mediante ensayos no destructivos. El presente estudio plantea la inspección de soldaduras de pernos conectores mediante su espectro acústico. Analíticamente, la investigación se ha centrado en el cálculo de los primeros modos propios de vibración. Experimentalmente se han medido las frecuencias propias de resonancia de 28 pernos, en los que posteriormente se han llevado a cabo ensayos tanto no destructivos como destructivos. Se ha obtenido, tanto teórica como experimentalmente, una relación entre la frecuencia de vibración de los pernos conectores y la calidad de la soldadura. Por ello se verifica la posibilidad de inspección de estas

  19. Tratamiento de un efluente textil mediante electrooxidación-Salix babylonica

    Sánchez Sánchez, Hilda Alejandra

    2016-01-01

    A nivel mundial, la industria textil es considerada una de las principales fuentes de descarga que afectan la calidad del agua debido al gran volumen que emplea en sus procesos y al uso de una amplia gama de colorantes sintéticos. En esta investigación se evaluó el tratamiento de un agua residual textil mediante un sistema acoplado de electrooxidación-Salix babylonica usando electrodos DDB. En el estudio, se construyó una celda electroquímica en batch, utilizando 5 electrodos paralelos vertic...

  20. Diseno e Implementación de un Sistema Automatizado para Control Remoto de Iluminación en Conformidad de la Tecnología INSTEON y Optimización del Sistema de Seguridad CCTV en el Edificio GIMPROMED

    Ronald Moreno

    2012-11-01

    Full Text Available El presente documento describe la implementación de un sistema automatizado y la optimización del sistema de seguridad CCTV (circuito cerrado de televisión para el edificio GIMPROMED. El sistema estará basado en la tecnología INSTEON y se orientara principalmente al control remoto de iluminación, y del equipo de climatización (aire acondicionado. La monitorización, supervisión y control del sistema se realizará a través de un software propietario desarrollado en lenguaje de programación de alto nivel JAVA, con un diseño personalizado y en base a los requerimientos del usuario. Los dispositivos del sistema automatizado serán seleccionados tomando en cuenta los tipos de cargas a controlar, el espacio físico disponible y la distribución de circuitos eléctricos. La optimización del circuito cerrado de televisión traerá consigo la implementación de un sistema flexible que permite integrar los dispositivos analógicos con las nuevas tecnologías existentes a fin de ofrecer una solución eficiente, robusta y flexible. En suma, este sistema, coadyuvará al desarrollo integral de la empresa, y proporcionara un ambiente productivo y eficiente a través de la automatización con el fin de brindar seguridad y respaldo a las personas que trabajan en ella.

  1. Compliant Tactile Sensors

    Torres-Jara, Eduardo R.

    2011-01-01

    Tactile sensors are currently being designed to sense interactions with human hands or pen-like interfaces. They are generally embedded in screens, keyboards, mousepads, and pushbuttons. However, they are not well fitted to sense interactions with all kinds of objects. A novel sensor was originally designed to investigate robotics manipulation where not only the contact with an object needs to be detected, but also where the object needs to be held and manipulated. This tactile sensor has been designed with features that allow it to sense a large variety of objects in human environments. The sensor is capable of detecting forces coming from any direction. As a result, this sensor delivers a force vector with three components. In contrast to most of the tactile sensors that are flat, this one sticks out from the surface so that it is likely to come in contact with objects. The sensor conforms to the object with which it interacts. This augments the contact's surface, consequently reducing the stress applied to the object. This feature makes the sensor ideal for grabbing objects and other applications that require compliance with objects. The operational range of the sensor allows it to operate well with objects found in peoples' daily life. The fabrication of this sensor is simple and inexpensive because of its compact mechanical configuration and reduced electronics. These features are convenient for mass production of individual sensors as well as dense arrays. The biologically inspired tactile sensor is sensitive to both normal and lateral forces, providing better feedback to the host robot about the object to be grabbed. It has a high sensitivity, enabling its use in manipulation fingers, which typically have low mechanical impedance in order to be very compliant. The construction of the sensor is simple, using inexpensive technologies like silicon rubber molding and standard stock electronics.

  2. Sensor for metal detection

    Kodzius, Rimantas

    2014-06-26

    NOVELTY - The sensor has a microfluidic flow channel that is provided with an inlet port, an outlet port, and a detection chamber. The detection chamber is provided with a group of sensing electrodes (4) having a working electrode (8), a counter electrode (9), and a reference electrode (10). A flow sensor is configured to measure flow in the channel. A temperature sensor (6) is configured to measure temperature in the channel (3). An electrical connection is configured to connect the sensor to a sensing device. USE - Sensor for detecting metal such as toxic metal in sample such as clinical sample such as stool, saliva, sputum, bronchial lavage, urine, vaginal swab, nasal swab, biopsy, tissue, tears, breath, blood, serum, plasma, cerebrospinal fluid, peritoneal fluid, pleural fluid, pericardial fluid, joint fluid, and amniotic fluid, water sample, food sample, air sample, and soil sample (all claimed). ADVANTAGE - The sensor for use with the portable analytical instrument is configured for detection of metalsin samples. The sensor can provide the excellent solution for on-site metal detection, including heavy metal detection. The sensors can provide significant advantages in higher throughput, lower cost, at the same time being less labor intensive and less dependent on individual skills. The disposable design of the sensor, the enhanced reliability and repeatability of measurements can be obtained. The sensors can be widely applied in various industries. DETAILED DESCRIPTION - INDEPENDENT CLAIMS are included for the following: (1) a system for detecting metal in sample; and (2) a method for using sensor for detecting metal in sample. DESCRIPTION OF DRAWING(S) - The drawing shows a schematic view of the sensor prototype. Channel (3) Sensing electrodes (4) Temperature sensor (6) Working electrode (8) Counter electrode (9) Reference electrode (10)

  3. Valoración de la dosis de diálisis mediante dialisancia iónica

    Rosa Caballero Barba

    2015-03-01

    Full Text Available Uno de los principales determinantes de la supervivencia de los pacientes en hemodiálisis es la dosis de la misma, las fórmulas comúnmente utilizadas son aquellas basadas en el modelo cinético de la urea. Sin embargo, debido a la necesidad de al menos dos muestras sanguíneas, su aplicabilidad a todas las sesiones de diálisis es bastante escasa. Actualmente casi todos los monitores de diálisis están provistos de sensores de dialisancia iónica, lo que nos permite obtener de forma indirecta y en tiempo real, información acerca del aclaramiento de urea en todas las sesiones de diálisis y sin necesidad de obtener muestras sanguíneas. Con el objetivo de evaluar la correlación que existe entre la dosis de diálisis medida por dialisancia iónica y aquella medida por cinética de Urea mediante la ecuación de KT/V monocompartimental de segunda generación según Daugirdas, diseñamos un estudio transversal que incluye 28 pacientes prevalentes de nuestra unidad de diálisis, obtuvimos datos de dosis de diálisis (aclaramiento, KT, KT/V por dialisancia iónica y el KT/V según fórmula de Daugirdas de segunda generación. La media de KT/V por dialisancia iónica fue de 1.79 ± 0.29 del KT/V según Daugirdas de 1.95 ± 0.35. En el análisis estadístico encontramos una importante correlación entre ambos métodos (R2 = 0.86 p< 0.001. Con los resultados de este estudio concluimos que la dialisancia iónica es una técnica útil para valorar la dosis de diálisis en nuestros pacientes y su uso debería generalizarse en las distintas unidades de diálisis.

  4. MITRE sensor layer prototype

    Duff, Francis; McGarry, Donald; Zasada, David; Foote, Scott

    2009-05-01

    The MITRE Sensor Layer Prototype is an initial design effort to enable every sensor to help create new capabilities through collaborative data sharing. By making both upstream (raw) and downstream (processed) sensor data visible, users can access the specific level, type, and quantities of data needed to create new data products that were never anticipated by the original designers of the individual sensors. The major characteristic that sets sensor data services apart from typical enterprise services is the volume (on the order of multiple terabytes) of raw data that can be generated by most sensors. Traditional tightly coupled processing approaches extract pre-determined information from the incoming raw sensor data, format it, and send it to predetermined users. The community is rapidly reaching the conclusion that tightly coupled sensor processing loses too much potentially critical information.1 Hence upstream (raw and partially processed) data must be extracted, rapidly archived, and advertised to the enterprise for unanticipated uses. The authors believe layered sensing net-centric integration can be achieved through a standardize-encapsulate-syndicateaggregate- manipulate-process paradigm. The Sensor Layer Prototype's technical approach focuses on implementing this proof of concept framework to make sensor data visible, accessible and useful to the enterprise. To achieve this, a "raw" data tap between physical transducers associated with sensor arrays and the embedded sensor signal processing hardware and software has been exploited. Second, we encapsulate and expose both raw and partially processed data to the enterprise within the context of a service-oriented architecture. Third, we advertise the presence of multiple types, and multiple layers of data through geographic-enabled Really Simple Syndication (GeoRSS) services. These GeoRSS feeds are aggregated, manipulated, and filtered by a feed aggregator. After filtering these feeds to bring just the type

  5. Capacitive chemical sensor

    Manginell, Ronald P; Moorman, Matthew W; Wheeler, David R

    2014-05-27

    A microfabricated capacitive chemical sensor can be used as an autonomous chemical sensor or as an analyte-sensitive chemical preconcentrator in a larger microanalytical system. The capacitive chemical sensor detects changes in sensing film dielectric properties, such as the dielectric constant, conductivity, or dimensionality. These changes result from the interaction of a target analyte with the sensing film. This capability provides a low-power, self-heating chemical sensor suitable for remote and unattended sensing applications. The capacitive chemical sensor also enables a smart, analyte-sensitive chemical preconcentrator. After sorption of the sample by the sensing film, the film can be rapidly heated to release the sample for further analysis. Therefore, the capacitive chemical sensor can optimize the sample collection time prior to release to enable the rapid and accurate analysis of analytes by a microanalytical system.

  6. The Ringcore Fluxgate Sensor

    Brauer, Peter

    1997-01-01

    A model describing the fundamental working principle of the "ringcore fluxgate sensor" is derived. The model is solely based on geometrical and measurable magnetic properties of the sensor and from this a number of fluxgate phenomenon can be described and estimated. The sensitivity of ringcore...... fluxgate sensors is measured for a large variety of geometries and is for all measurements found to fall between two limits obtained by the fluxgate model. The model is used to explain the zero field odd harmonic output of the fluxgate sensor, called the "feedthrough". By assuming a non ideal sensor...... with spatially distributed magnetization, the model predicts feedthrough signals which exactly reflects the measured signals. The non-linearities in a feedback compensated ringcore fluxgate sensors, called the "transverse field effect", can also be explained by the model. Measurements on stress annealed...

  7. Cryogenic microsize Hall sensors

    Kvitkovic, J.; Polak, M.

    1993-01-01

    Hall sensors have a variety of applications in magnetic field measurements. The active area of the Hall sensor does not play an important role in measuring of homogeneous magnetic field. Actually Hall sensors are widely used to measure profiles of magnetic fields produced by magnetization currents in samples of HTC superconductors, as well as of LTC ones. Similar techniques are used to measure magnetization of both HTC and LTC superconductors. In these cases Hall sensor operates in highly inhomogeneous magnetic fields. Because of that, Hall sensors with very small active area are required. We developed and tested Hall sensors with active area 100 μm x 100 μm - type M and 50 μm x 50 μm - type V. Here we report on the most imporant parameters of these units, as well as on their properties as differential magnetometer. (orig.)

  8. Clementine sensor suite

    Ledebuhr, A.G. [Lawrence Livermore National Lab., CA (United States)

    1994-11-15

    LLNL designed and built the suite of six miniaturized light-weight space-qualified sensors utilized in the Clementine mission. A major goal of the Clementine program was to demonstrate technologies originally developed for Ballistic Missile Defense Organization Programs. These sensors were modified to gather data from the moon. This overview presents each of these sensors and some preliminary on-orbit performance estimates. The basic subsystems of these sensors include optical baffles to reject off-axis stray light, light-weight ruggedized optical systems, filter wheel assemblies, radiation tolerant focal plane arrays, radiation hardened control and readout electronics and low mass and power mechanical cryogenic coolers for the infrared sensors. Descriptions of each sensor type are given along with design specifications, photographs and on-orbit data collected.

  9. Flexible magnetoimpedance sensor

    Li, Bodong

    2015-03-01

    Flexible magnetoimpedance (MI) sensors fabricated using a NiFe/Cu/NiFe tri-layer on Kapton substrate have been studied. A customized flexible microstrip transmission line was employed to investigate the MI sensors\\'s magnetic field and frequency responses and their dependence on the sensors\\'s deflection. For the first time, the impedance characteristic is obtained through reflection coefficient analysis over a wide range of frequencies from 0.1 MHz to 3 GHz and for deflections ranging from zero curvature to a radius of 7.2 cm. The sensor element maintains a high MI ratio of up to 90% and magnetic sensitivity of up to 9.2%/Oe over different bending curvatures. The relationship between the curvature and material composition is discussed based on the magnetostriction effect and stress simulations. The sensor\\'s large frequency range, simple fabrication process and high sensitivity provide a great potential for flexible electronics and wireless applications.

  10. Working Group Report: Sensors

    Artuso, M.; et al.,

    2013-10-18

    Sensors play a key role in detecting both charged particles and photons for all three frontiers in Particle Physics. The signals from an individual sensor that can be used include ionization deposited, phonons created, or light emitted from excitations of the material. The individual sensors are then typically arrayed for detection of individual particles or groups of particles. Mounting of new, ever higher performance experiments, often depend on advances in sensors in a range of performance characteristics. These performance metrics can include position resolution for passing particles, time resolution on particles impacting the sensor, and overall rate capabilities. In addition the feasible detector area and cost frequently provides a limit to what can be built and therefore is often another area where improvements are important. Finally, radiation tolerance is becoming a requirement in a broad array of devices. We present a status report on a broad category of sensors, including challenges for the future and work in progress to solve those challenges.

  11. Influence of Ce(III/Ce(IV - supplements on the Characteristics of Humidity Sensors with TiO2 Films Prepared via a Sol-gel Method

    Kozhukharov, S.

    2013-04-01

    Full Text Available Humidity sensors have been prepared via a sol-gel method to deposit TiO2 films with additions of Ce-compounds on alumina substrates, with interdigitated silver palladium electrodes. Observations by scanning electron microscopy (SEM were performed in order to determine the surface morphology of the respective layers. Structural and compositional characterization was done by X-ray diffraction analysis (XRD, and energy dispersive X-ray spectroscopy (EDX for investigation of the relation between the film structures and the parameters of the respective sensors. The influence of Ce-compounds on the electrical characteristics of the samples as humidity sensing elements has been evaluated by an impedance analyzer.Los sensores de humedad han sido desarrollados mediante el método sol-gel para depositar películas superficiales basadas en TiO2 con adiciones de compuestos de cerio sobre sustratos de corindón y electrodos de aleación de plata y paladio. Se han realizado observaciones mediante el Microscopio Electrónico de Barrido (MEB para determinar la morfología superficial de las capas respectivas. Las caracterizaciones de la estructura y composición han sido realizadas mediante Difracción de Rayos X (DRX y espectroscopía de dispersión energética de rayos X (EDERX, con el fin de investigar la relación entre la estructura de las capas y los parámetros de los sensores respectivos. La influencia de los compuestos de cerio sobre las características eléctricas de los sensores de humedad obtenidos se ha evaluado mediante el análisis de impedancia eléctrica.

  12. Predicción y simulación, mediante lógica difusa, de la temperatura de salida del arrabio en un horno alto

    Romero, Miguel Angel

    2000-02-01

    Full Text Available This work describes the development and further validation of a model devoted to blast furnace hot metal temperature forecast, based on Fuzzy logic principles. The model employs as input variables, the control variables of an actual blast furnace: Blast volume, moisture, coal injection, oxygen addition, etc. and it yields as a result the hot metal temperature with a forecast horizon of forty minutes. As far as the variables used to develop the model have been obtained from data supplied by an actual blast furnace sensors, it is necessary to properly analyze and handle such data. Especial attention was paid to data temporal correlation, fitting by interpolation the different sampling rates. In the training stage of the model the ANFIS (Adaptive Neuro-Fuzzy Inference System and the Subtractive Clustering algorithms have been used.

    El presente artículo describe el desarrollo y posterior validación de un modelo para predecir la temperatura del arrabio de un horno alto, basado en lógica difusa. El modelo emplea, como variables de entrada, las variables de control propias del horno: caudal de viento, humedad, inyección de carbón, adición de oxígeno, etc. y obtiene, como resultado, el valor de la temperatura del arrabio producido por el horno, con un horizonte de predicción de 40 min. Las variables empleadas para el desarrollo del modelo se obtuvieron de los datos suministrados por lo sensores de un horno alto real. Fue preciso analizar y tratar adecuadamente dichos datos antes de introducirlos en el modelo. Se prestó especial atención a la correlación temporal de los datos adecuando mediante interpolación los distintos períodos de muestreo. El modelo se entrenó utilizando dos tipos de algoritmos: un sistema de inferencia neuro-difuso adaptativo (ANFIS y el Agrupamiento Sustractivo.

  13. Contact stress sensor

    Kotovsky, Jack [Oakland, CA

    2012-02-07

    A contact stress sensor includes one or more MEMS fabricated sensor elements, where each sensor element of includes a thin non-recessed portion, a recessed portion and a pressure sensitive element adjacent to the recessed portion. An electric circuit is connected to the pressure sensitive element. The circuit includes a thermal compensator and a pressure signal circuit element configured to provide a signal upon movement of the pressure sensitive element.

  14. Transient multivariable sensor evaluation

    Vilim, Richard B.; Heifetz, Alexander

    2017-02-21

    A method and system for performing transient multivariable sensor evaluation. The method and system includes a computer system for identifying a model form, providing training measurement data, generating a basis vector, monitoring system data from sensor, loading the system data in a non-transient memory, performing an estimation to provide desired data and comparing the system data to the desired data and outputting an alarm for a defective sensor.

  15. Networked Sensor Arrays

    Tighe, R. J.

    2002-01-01

    A set of independent radiation sensors, coupled with real-time data telemetry, offers the opportunity to run correlation algorithms for the sensor array as well as to incorporate non-radiological data into the system. This may enhance the overall sensitivity of the sensors and provide an opportunity to project the location of a source within the array. In collaboration with Lawrence Livermore National Laboratory (LLNL) and Sandia National Laboratories (SNL), we have conducted field experiments to test a prototype system. Combining the outputs of a set of distributed sensors permits the correlation that the independent sensor outputs. Combined with additional information such as traffic patterns and velocities, this can reduce random/false detections and enhance detection capability. The principle components of such a system include: (1) A set of radiation sensors. These may be of varying type and complexity, including gamma and/or neutron detectors, gross count and spectral-capable sensors, and low to high energy-resolution sensors. (2) A set of non-radiation sensors. These may include sensors such as vehicle presence and imaging sensors. (3) A communications architecture for near real-time telemetry. Depending upon existing infrastructure and bandwidth requirements, this may be a radio or hard-wire based system. (4) A central command console to pole the sensors, correlate their output, and display the data in a meaningful form to the system operator. Both sensitivity and selectivity are important considerations when evaluating the performance of a detection system. Depending on the application, the optimization of sensitivity as well as the rejection of ''nuisance'' radioactive sources may or may not be critical

  16. Bioinspired Sensor Systems

    Manel del Valle

    2011-10-01

    Full Text Available This editorial summarizes and classifies the contributions presented by different authors to the special issue of the journal Sensors dedicated to Bioinspired Sensor Systems. From the coupling of sensor arrays or networks, plus computer processing abilities, new applications to mimic or to complement human senses are arising in the context of ambient intelligence. Principles used, and illustrative study cases have been presented permitting readers to grasp the current status of the field.

  17. Magnetic actuators and sensors

    Brauer, John R

    2014-01-01

    An accessible, comprehensive guide on magnetic actuators and sensors, this fully updated second edition of Magnetic Actuators and Sensors includes the latest advances, numerous worked calculations, illustrations, and real-life applications. Covering magnetics, actuators, sensors, and systems, with updates of new technologies and techniques, this exemplary learning tool emphasizes computer-aided design techniques, especially magnetic finite element analysis, commonly used by today's engineers. Detailed calculations, numerous illustrations, and discussions of discrepancies make this text an inva

  18. Perimeter intrusion sensors

    Eaton, M.J.

    1977-01-01

    To obtain an effective perimeter intrusion detection system requires careful sensor selection, procurement, and installation. The selection process involves a thorough understanding of the unique site features and how these features affect the performance of each type of sensor. It is necessary to develop procurement specifications to establish acceptable sensor performance limits. Careful explanation and inspection of critical installation dimensions is required during on-site construction. The implementation of these activities at a particular site is discussed

  19. Monitorización de Signos Vitales Mediante una Red de Dispositivos Móviles

    Daniel Cilio

    2013-11-01

    Full Text Available El desarrollo e implementación de diferentes proyectos tecnológicos, apoyados en el correspondiente conocimiento médico, pueden contribuir a resolver varios problemas del sector de la salud. Si bien en los últimos años se han realizado enormes esfuerzos para desarrollar tecnologías aplicables en ambientes clínicos, el desarrollo de tecnologías para atención médica domiciliar podría reducir la presión que agobia a los hospitales actualmente. En el presente proyecto se realiza el diseño e implementación de un sistema para monitorización de signos vitales, el cual mide la frecuencia cardiaca, la oxigenación sanguínea y la temperatura corporal de una persona. La información obtenida de cada signo vital es muestreada y procesada por una plataforma digital para posteriormente ser enviada mediante un módulo Bluetooth hacia un dispositivo móvil para su análisis y visualización. El prototipo fue evaluado mediante una batería de pruebas para medición de signos vitales en diferentes pacientes.

  20. Pronósticos de inflación mediante técnicas bayesianas

    Juan Diego Chavarría

    2015-11-01

    Full Text Available La efectividad de la política monetaria bajo un esquema de metas de inflación como el propuesto por el Banco Central de Costa Rica se basa en buena medida en el correcto y oportuno pronóstico de la inflación a corto y mediano plazo con el fin de diseñar de mejor forma las acciones de política monetaria. Así, el propósito de este trabajo es desarrollar una herramienta complementaria para elaborar pronósticos de inflación mediante un enfoque bayesiano. Para lo anterior se propone la utilización de la metodología Bayesian Model Averaging y de Weighted Average Least Squares. Los modelos de proyección especificados permitirían ampliar y complementar el análisis que se realiza actualmente con el Modelo Macroeconómico de Proyección Trimestral (MMPT del Banco Central de Costa Rica. Como resultado esta investigación muestra que, para datos de periodicidad mensual y a horizontes de pronóstico de 1 a 12 meses, es posible encontrar proyecciones mediante un proceso bayesiano que poseen una mayor capacidad predictiva en relación con aquellas producidas por un modelo autorregresivo.

  1. Principios básicos y aplicación del aprendizaje mediante tareas

    Estaire, Sheila

    2011-04-01

    Full Text Available En los últimos años el aprendizaje mediante tareas ha ido consolidándose como una nueva forma de enseñar y aprender lenguas extranjeras. Sin embargo existen una serie de aspectos prácticos relacionados con su aplicación en los que aún se puede profundizar. En este artículo, después de una introducción breve de algunos principios básicos, se discuten posibles procedimientos para determinar las tareas que constituyen el eje de un programa, así como para organizar el proceso de enseñanza / aprendizaje. A continuación se presentan diferentes modalidades de trabajo sobre los aspectos formales de la lengua, aspectos que es esencial tratar de forma rigurosa, minuciosa y sistemática. Este punto crucial se discute junto con una propuesta de estructura de curso que consta de dos componentes diferenciados. Por otra parte, los elementos innovadores del aprendizaje mediante tareas hacen imprescindible una gestión del aprendizaje también innovadora, aspecto que se trata en el último apartado a través de pautas metodológicas que potencian la eficacia de las tareas como instrumento de aprendizaje.

  2. Ahorro energético mediante estrategias de iluminación natural optimizadas

    Puigdomènech Franquesa, Joan

    1986-04-01

    Full Text Available Electrical charges in buildings and specially in those of commercial use, can be diminished by means of natural lighting strategies. Taking the climate features of our country into consideration, it is necessary to prevent the inconveniences caused by an en erg y excess in summer, so solar Controls are needed. The only practical way to achieve the suitable balance between thermal and light needs, so as to get a monthly or annual energetic balance optimization, is to operate with the computer. A programme with such characteristics is described here. Its application gives important sarings in non renouvable energy savings.Mediante estrategias de iluminación natural es posible disminuir las cargas eléctricas de los edificios y en especial los de uso comercial. Dadas las características climáticas de nuestro país es necesario prever los inconvenientes de un exceso de energía en verano, para lo cual es preciso disponer de controles solares. Encontrar el correcto equilibrio entre las necesidades térmicas y lumínicas en base a la optimización del balance energético mensual o anual es únicamente factible mediante el uso del ordenador. Un programa que responde a estas características es descrito en el presente trabajo, obteniéndose con su aplicación importantes ahorros en el consumo de energías no renovables.

  3. PROPUESTA DE CONEXIÓN DE ENTORNOS IPv6 MEDIANTE UN BACKBONE MPLS/IPv4

    Nancy Yaneth Gelvez García

    2013-09-01

    Full Text Available Las redes actuales MPLS/IPv4 presentan las ventajas de poder implementar ingeniería de tráfico, así como realizar diferenciación de flujos mediante clases de servicio (CoS frente a las redes con enrutamiento IP tradicional. En aras de aprovechar cualidades estratégicas durante la etapa de coexistencia entre IPv4 e IPv6 existen 4 métodos para proveer conectividad a islas IPv6 [1] remotas a través de una infraestructura de core MPLS con IPv4 nativo [2], sin embargo una de las formas que permite un rápida y fácil provisión de la misma dados los mínimos requisitos de configuración y de equipos es la de disponer túneles IPv6 en los enrutadores de acceso (CE de la red. No obstante, sus cuatro variantes (manual, GRE, 6to4 e IPv6 compatible IPv4 [3] resultan adecuadas o no según las características inherentes de la red a interconectar; por tanto este artículo presenta las ventajas y desventajas propias de la utilización de cada técnica de entunelamiento como resultado de la interconexión con los cuatro tipos de túneles de una red emulada mediante GNS3+Dynamips.

  4. Modelo de dinámica lateral de vehículo mediante bond graph

    Juan Carlos Parra Márquez

    2008-07-01

    Full Text Available Este trabajo presenta los resultados de la investigación, cuyo objetivo es obtener un modelo matemático que permita determinar la dinámica lateral de un vehículo mediante el uso de Bond Graph. Este modelo es válido para robótica móvil. Los análisis de comportamiento del modelo han sido probados con simulaciones típicas del movimiento lateral de un vehículo. Finalmente, este modelo ha sido obtenido e implementado mediante el software 20-Sim. This paper presents the results of a research whose objective was to find a mathematical model in order to determine the lateral dynamic of Vehicle by means of the use of Bond Graph. This model is valid also for mobile robotics. The analyses of behavior of the model were realized across typical simulations of a vehicle in lateral movement. Finally, this mathematical model was obtained and implemented across the software 20-Sim.

  5. DIMENSIONAMIENTO DE UN SISTEMA DE ENERGÍA TERMOSOLAR MEDIANTE EL USO DE UN MODELO

    Arturo Daniel Alarcón Rodríguez

    2004-01-01

    Full Text Available En el presente artículo se expone el método de dimensionamiento de sistemas termosolares mediante el uso de un modelo matemático. Este método es comúnmente usado debido que es simple, flexible pero a la vez muy potente. La simulación del sistema termosolar se realiza en base a un modelo matemático que describe los fenómenos térmicos que ocurren mediante un conjunto de ecuaciones diferenciales. Los parámetros que determinan el modelo son coeficientes de intercambio de calor entre los elementos del sistema, parámetros que representan las características de los componentes del sistema termosolar y parámetros que representan las condiciones en las que trabajará el sistema. Estos parámetros se determinan en base a recomendaciones de bibliografía, observaciones, mediciones de campo y correlaciones adecuadas. El uso de un modelo para el dimensionamiento de un sistema termosolar resulta una herramienta muy útil, ya que se adapta a distintas configuraciones de sistemas termosolares. Permite asimismo, tener una idea bastante aproximada del comportamiento del sistema termosolar en distintas condiciones de uso, la que sólo podría obtenerse a través de experimentos físicos complicados y por ende costosos.

  6. Smart sensors and systems

    Kyung, Chong-Min; Yasuura, Hiroto; Liu, Yongpan

    2015-01-01

     This book describes for readers technology used for effective sensing of our physical world and intelligent processing techniques for sensed information, which are essential to the success of Internet of Things (IoTs).  The authors provide a multidisciplinary view of sensor technology from MEMS, biological, chemical, and electrical domains and showcase smart sensor systems in real applications including smart home, transportation, medical, environmental, agricultural, etc.  Unlike earlier books on sensors, this book will provide a “global” view on smart sensors covering abstraction levels from device, circuit, systems, and algorithms.  .

  7. Dynamic Sensor Networks

    Schott, Brian

    2004-01-01

    ...: Declarative Languages and Execution Environment includes topographical soldier interface and a sensor network simulation environment for algorithm development, deployment planning, and operational support. Finally, Task 3...

  8. Palladium Nanoparticle Hydrogen Sensor

    I. Pavlovsky

    2006-12-01

    Full Text Available An innovative hydrogen sensor based on palladium (Pd nanoparticle networks is described in the article. Made by Applied Nanotech Inc. sensor has a fast response time, in the range of seconds, which is increased at 80 °C due to higher hydrogen diffusion rates into the palladium lattice. The low detection limit of the sensor is 10 ppm of H2, and the high limit is 40,000 ppm. This is 100% of a lowest flammability level of hydrogen. This range of sensitivities complies with the requirements that one would expect for a reliable hydrogen sensor.

  9. Smart and Intelligent Sensors

    Lansaw, John; Schmalzel, John; Figueroa, Jorge

    2009-01-01

    John C. Stennis Space Center (SSC) provides rocket engine propulsion testing for NASA's space programs. Since the development of the Space Shuttle, every Space Shuttle Main Engine (SSME) has undergone acceptance testing at SSC before going to Kennedy Space Center (KSC) for integration into the Space Shuttle. The SSME is a large cryogenic rocket engine that uses Liquid Hydrogen (LH2) as the fuel. As NASA moves to the new ARES V launch system, the main engines on the new vehicle, as well as the upper stage engine, are currently base lined to be cryogenic rocket engines that will also use LH2. The main rocket engines for the ARES V will be larger than the SSME, while the upper stage engine will be approximately half that size. As a result, significant quantities of hydrogen will be required during the development, testing, and operation of these rocket engines.Better approaches are needed to simplify sensor integration and help reduce life-cycle costs. 1.Smarter sensors. Sensor integration should be a matter of "plug-and-play" making sensors easier to add to a system. Sensors that implement new standards can help address this problem; for example, IEEE STD 1451.4 defines transducer electronic data sheet (TEDS) templates for commonly used sensors such as bridge elements and thermocouples. When a 1451.4 compliant smart sensor is connected to a system that can read the TEDS memory, all information needed to configure the data acquisition system can be uploaded. This reduces the amount of labor required and helps minimize configuration errors. 2.Intelligent sensors. Data received from a sensor be scaled, linearized; and converted to engineering units. Methods to reduce sensor processing overhead at the application node are needed. Smart sensors using low-cost microprocessors with integral data acquisition and communication support offer the means to add these capabilities. Once a processor is embedded, other features can be added; for example, intelligent sensors can make

  10. Microfabricated Formaldehyde Gas Sensors

    Karen C. Cheung

    2009-11-01

    Full Text Available Formaldehyde is a volatile organic compound that is widely used in textiles, paper, wood composites, and household materials. Formaldehyde will continuously outgas from manufactured wood products such as furniture, with adverse health effects resulting from prolonged low-level exposure. New, microfabricated sensors for formaldehyde have been developed to meet the need for portable, low-power gas detection. This paper reviews recent work including silicon microhotplates for metal oxide-based detection, enzyme-based electrochemical sensors, and nanowire-based sensors. This paper also investigates the promise of polymer-based sensors for low-temperature, low-power operation.

  11. Comparación del gasto energético en reposo determinado mediante calorimetría indirecta y estimado mediante fórmulas predictivas en mujeres con grados de obesidad I a III

    Alicia Parra-Carriedo; Loren Cherem-Cherem; Daniela Galindo-De Noriega; Mary Carmen Díaz-Gutiérrez; Ana Bertha Pérez-Lizaur; César Hernández-Guerrero

    2013-01-01

    Introducción: La determinación del gasto energético en reposo (GER) se calcula cotidianamente a partir de fórmulas predictivas aunque el resultado varía dependiendo de la población. Objetivo: Comparar la determinación del GER mediante calorimetría indirecta y mediante las ecuaciones Harris-Benedict (HB), Mifflin (MF), Organización Mundial de la Salud (OMS), "Institute of Medicine" (IOM), Fórmula Rápida (FR) y Valencia (VA) en mujeres con grados de obesidad I a III. Métodos: Mujeres adultas me...

  12. Microelectronic temperature sensor; silicon temperature sensor

    Beitner, M.; Kanert, W.; Reichert, H.

    1982-01-01

    The goal of this work was to develop a silicon temperature sensor with a sensitivity and a reliability as high and a tolerance as small as possible, for use in measurement and control. By employing the principle of spreading-resistance, using silicon doped by neutron transmutation, and trimming of the single wafer tolerances of resistance less than +- 5% can be obtained; overstress tests yielded a long-term stability better than 0.2%. Some applications show the advantageous use of this sensor. (orig.) [de

  13. Expansion of IFC model with structural sensors

    Rio, J.

    2013-06-01

    Full Text Available The instrumentation and structural health monitoring, SHM, of buildings is a growing field in the construction industry. The goal of this research work is to explore ways of modeling SHM systems, and the resulting data collected from buildings, in standard information management system such as Building Information Models, BIM. These models need to be stored in digital databases with structures suitable for the specific building related information. In this work the Industry Foundation Classes, IFC, data model was used. A case study is presented to assess the applicability of the present IFC standard as a tool to build a three-dimensional digital model of a real instrumented building, as well as some of the structural sensors and their results. The interoperability of the digital model was verified by using different modeling, viewing and analysis software tools. Limitations of the current IFC model were explored and extensions to the sensor classes are proposed.La instrumentación y monitorización de la salud estructural de edificios, SHM, es un campo creciente en la industria de la construcción. El objetivo del presente trabajo es estudiar la modelación de sistemas SHM tomados de edificios en un modelo digital BIM e la sua integración de datos. Estos modelos deben almacenarse en bases de datos con una estructura apropiada para albergar información específica relacionada con la construcción. En este trabajo se utilizó el estándar Industry Foundation Classes, IFC. Se presenta un estudio de caso para evaluar la norma IFC como herramienta para modelar un edificio real instrumentado, así como algunos sensores estruturales e sus resultados. La inter-operatividad de lo modelo digital se ha comprobado mediante el uso de diferentes herramientas de software de modelación, visualización y análisis. Se exploran además limitaciones del modelo IFC y se proponen extensiones de las clases de sensores.

  14. Medical Sensor Network Infrastructures

    Andersen, Jacob

    researchers have been developing power-efficient security mechanisms for sensor networks. However, most of this work ignores the special usability demands from the clinical use-scenarios: set-up must be fast, and key pre-distribution is problematic if disposable sensors are discarded after being used for only...

  15. Sensors in Education

    Van Rosmalen, Peter; Schneider, Jan; Börner, Dirk

    2014-01-01

    Sensors rapidly become available both for personal as well as scientific use. A wide range of applications exists for personal use e.g. safety in and around the house, sport, fitness and health. In this workshop we will explore how sensors are (can be) used in education. We start with an

  16. Nanophotonic Image Sensors.

    Chen, Qin; Hu, Xin; Wen, Long; Yu, Yan; Cumming, David R S

    2016-09-01

    The increasing miniaturization and resolution of image sensors bring challenges to conventional optical elements such as spectral filters and polarizers, the properties of which are determined mainly by the materials used, including dye polymers. Recent developments in spectral filtering and optical manipulating techniques based on nanophotonics have opened up the possibility of an alternative method to control light spectrally and spatially. By integrating these technologies into image sensors, it will become possible to achieve high compactness, improved process compatibility, robust stability and tunable functionality. In this Review, recent representative achievements on nanophotonic image sensors are presented and analyzed including image sensors with nanophotonic color filters and polarizers, metamaterial-based THz image sensors, filter-free nanowire image sensors and nanostructured-based multispectral image sensors. This novel combination of cutting edge photonics research and well-developed commercial products may not only lead to an important application of nanophotonics but also offer great potential for next generation image sensors beyond Moore's Law expectations. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Sensor technology foresight

    Andersen, Per Dannemand; Jørgensen, Birte Holst; Rasmussen, Birgitte

    2001-01-01

    heavily impacted by new sensor technology. It also appears that new sensor technology will affect food processing and the environment sector. Some impact is made on sectors such as agriculture, chemical engineering, domestic and otherappliances, security and defence, transport, and energy. Less impact...

  18. ALC Rooftop Sensor System

    2017-10-31

    Department of the Army position unless so designated by other authorized documents. Citation of manufacturer’s or trade names does not constitute an... Interior view of the new sensor box ...................................................... 3 Fig. 4 Interior of original sensor box...7 Fig. 10 Interior of fiber patch panel .................................................................. 7 Fig. 11

  19. Stretch Sensor Device

    2013-01-01

    The invention relates to a method for determining stretch values and movement of body parts, e.g. a foot, by analysing stretch data from a stretch sensor. By analysing data from the stretch sensor it is possible to determine stretch samples which are associated with particular motion phases...

  20. Magnetic sensor device

    2009-01-01

    The present invention provides a sensor device and a method for detg. the presence and/or amt. of target moieties in a sample fluid, the target moieties being labeled with magnetic or magnetizable objects. The sensor device comprises a magnetic field generating means adapted for applying a retention

  1. Aggregating Linked Sensor Data

    Stasch, Christoph; Schade, Sven; Llaves, Alejandro; Janowicz, K.; Bröring, Arne; Taylor, Kerry; Ayyagari, Arun; De Roure, David

    2011-01-01

    Sensor observations are usually oered in relation to a specific purpose, e.g., for reporting fine dust emissions, following strict procedures, and spatio-temporal scales. Consequently, the huge amount of data gathered by today's public and private sensor networks is most often not reused outside of

  2. Sensor Data Fusion

    Plascencia, Alfredo; Stepán, Petr

    2006-01-01

    The main contribution of this paper is to present a sensor fusion approach to scene environment mapping as part of a Sensor Data Fusion (SDF) architecture. This approach involves combined sonar array with stereo vision readings.  Sonar readings are interpreted using probability density functions...

  3. Multifunctional optical sensor

    2010-01-01

    The invention relates to a multifunctional optical sensor, having at least 2 areas which independently react to different input parameters, the sensor comprising a substrate and a polymeric layer comprising polymerized liquid crystal monomers having an ordered morphology, wherein the color, the

  4. Sensor Alerting Capability

    Henriksson, Jakob; Bermudez, Luis; Satapathy, Goutam

    2013-04-01

    There is a large amount of sensor data generated today by various sensors, from in-situ buoys to mobile underwater gliders. Providing sensor data to the users through standardized services, language and data model is the promise of OGC's Sensor Web Enablement (SWE) initiative. As the amount of data grows it is becoming difficult for data providers, planners and managers to ensure reliability of data and services and to monitor critical data changes. Intelligent Automation Inc. (IAI) is developing a net-centric alerting capability to address these issues. The capability is built on Sensor Observation Services (SOSs), which is used to collect and monitor sensor data. The alerts can be configured at the service level and at the sensor data level. For example it can alert for irregular data delivery events or a geo-temporal statistic of sensor data crossing a preset threshold. The capability provides multiple delivery mechanisms and protocols, including traditional techniques such as email and RSS. With this capability decision makers can monitor their assets and data streams, correct failures or be alerted about a coming phenomena.

  5. Electrocatalytic glucose sensor

    Gebhardt, U; Luft, G; Mund, K; Preidel, W; Richter, G J

    1983-01-01

    An artificial pancreas consists of an insulin depot, a dosage unit and a glucose sensor. The measurement of the actual glucose concentration in blood is still an unsolved problem. Two methods are described for an electrocatalytic glucose sensor. Under the interfering action of amino acids and urea in-vitro measurements show an error of between 10% and 20%.

  6. Manejo sostenible y sustentable de fincas productoras mediante procesos participativos en Sáchica, Boyacá

    Ángel Eduardo Ramírez-Amaya; Germán Gonzalo Hurtado

    2013-01-01

    Objetivo. Elaborar un proyecto de desarrollo sostenible y sustentable de fincas productoras mediante procesos participativos en el municipio de Sáchica, Boyacá. Materiales y métodos. La investigación se realizó con familias campesinas de la vereda Arrayán Alto, del municipio de Sáchica, Boyacá, mediante la metodología Investigación Acción Participativa (IAP), que se centra en la participación de las comunidades para elaborar propuestas concertadas con ellas. El trabajo se desarrolló en varias...

  7. La prueba obtenida mediante coacción y su inadmisibilidad ante la Corte Interamericana de Derechos Humanos

    Paúl Díaz, Álvaro

    2016-01-01

    La Corte Interamericana de Derechos Humanos efectúa un amplio análisis probatorio para determinar la ocurrencia de violaciones de derechos humanos. Ella tiende a ser muy flexible con la admisión de la prueba, sin perjuicio de ello estaría obligada a excluir confesiones obtenidas mediante coacción. En relación con esto, la Corte ha hecho afirmaciones que parecen propiciar la exclusión de toda prueba obtenida mediante coerción, y dar pie a la doctrina del fruto de árbol envenenado. Este artícul...

  8. Modelado del proceso de esterilización del hospital clínico universitario de Valladolid mediante diagramas IDEF

    Viñas del Hoyo, Víctor

    2015-01-01

    El principal objetivo de este trabajo de fin de grado es elaborar mediante diagramas IDEF, más concretamente el IDEFO, cuál sería el funcionamiento de la central de esterilización de nueva construcción del Hospital Clínico Universitario de Valladolid, mediante la gestión por procesos. Otros objetivos secundarios pero no menos importantes de este proyecto son:comprender el modelo de gestión por procesos e identificar los pasos que hay que seguir para implantarla correctamente. Ver y aprender ...

  9. Mapas de Entornos Mediante Navegacion Difusa y Sistema de Teleoperacion de una Plataforma Pioneer P3-DX

    Daniel Granda

    2013-11-01

    Full Text Available El presente proyecto describe el diseno e implementacion de aplicaciones de Teleoperacion, Adquisicion de Datos, Control Difuso de Velocidad y Mapeo de Entornos en 2D, para la plataforma movil Pioneer P3-DX mediante el uso de sonares, odometrıa y software libre GNU/Linux. El proyecto brinda una guıa para utilizar los conceptos de programacion en Python, que permite crear aplicaciones de manera versatil mediante el uso de librerıas como: GTK para el desarrollo del entorno grafico, PYFUZZY para el desarrollo del controlador difuso de velocidad y OPENCV para mostrar los mapas del entorno.

  10. Evapotranspiração real diária em sub-bacias do Paracatu, utilizando produtos do sensor Modis

    Evaldo de Paiva Lima

    2014-02-01

    Full Text Available A evapotranspiração define a perda total de água do sistema solo-planta para a atmosfera. Nas áreas agrícolas, particularmente onde se pratica algum tipo de irrigação, a determinação da evapotranspiração, por via de sensoriamento remoto, vem ganhando cada vez mais importância, pois possibilita identificar a eficiência com que a água tem sido utilizada. Nesse contexto, este trabalho tem o objetivo de determinar a evapotranspiração real diária (ETr diária, com a utilização de produtos do sensor MODIS, nas sub-bacias do Ribeirão Entre Ribeiros e Rio Preto, que ficam entre os Estados de Goiás e Minas Gerais. O SEBAL (Surface Energy Balance Algorithm for Land foi utilizado para a obtenção da ETr diária em quatro dias diferentes, no período de julho a outubro de 2007. Os resultados encontrados foram compatíveis com os citados em outras literaturas e a comparação entre a evapotranspiração, obtida pelo SEBAL, e a evapotranspiração da cultura (ETc demonstraram que esse algoritmo pode ser utilizado como boa opção para determinar, com a utilização de produtos do sensor MODIS, a evapotranspiração diária nas condições das sub-bacias do ribeirão Entre Ribeiros e rio Preto.

  11. Pressure Measurement Sensor

    1997-01-01

    FFPI Industries Inc. is the manufacturer of fiber-optic sensors that furnish accurate pressure measurements in internal combustion chambers. Such an assessment can help reduce pollution emitted by these engines. A chief component in the sensor owes its seven year- long development to Lewis Research Center funding to embed optical fibers and sensors in metal parts. NASA support to Texas A&M University played a critical role in developing this fiber optic technology and led to the formation of FFPI Industries and the production of fiber sensor products. The simple, rugged design of the sensor offers the potential for mass production at low cost. Widespread application of the new technology is forseen, from natural gas transmission, oil refining and electrical power generation to rail transport and the petrochemical paper product industry.

  12. An electrokinetic pressure sensor

    Kim, Dong-Kwon; Kim, Sung Jin; Kim, Duckjong

    2008-01-01

    A new concept for a micro pressure sensor is demonstrated. The pressure difference between the inlet and the outlet of glass nanochannels is obtained by measuring the electrokinetically generated electric potential. To demonstrate the proposed concept, experimental investigations are performed for 100 nm wide nanochannels with sodium chloride solutions having various concentrations. The proposed pressure sensor is able to measure the pressure difference within a 10% deviation from linearity. The sensitivity of the electrokinetic pressure sensor with 10 −5 M sodium chloride solution is 18.5 µV Pa −1 , which is one order of magnitude higher than that of typical diaphragm-based pressure sensors. A numerical model is presented for investigating the effects of the concentration and the channel width on the sensitivity of the electrokinetic pressure sensor. Numerical results show that the sensitivity increases as the concentration decreases and the channel width increases

  13. 2-Sensor Problem

    Michael Segal

    2004-11-01

    Full Text Available Abstract: Ad-hoc networks of sensor nodes are in general semi-permanently deployed. However, the topology of such networks continuously changes over time, due to the power of some sensors wearing out to new sensors being inserted into the network, or even due to designers moving sensors around during a network re-design phase (for example, in response to a change in the requirements of the network. In this paper, we address the problem of covering a given path by a limited number of sensors — in our case to two, and show its relation to the well-studied matrix multiplication problem.

  14. Fiber optic gas sensor

    Chen, Peng (Inventor); Buric, Michael P. (Inventor); Swinehart, Philip R. (Inventor); Maklad, Mokhtar S. (Inventor)

    2010-01-01

    A gas sensor includes an in-fiber resonant wavelength device provided in a fiber core at a first location. The fiber propagates a sensing light and a power light. A layer of a material is attached to the fiber at the first location. The material is able to absorb the gas at a temperature dependent gas absorption rate. The power light is used to heat the material and increases the gas absorption rate, thereby increasing sensor performance, especially at low temperatures. Further, a method is described of flash heating the gas sensor to absorb more of the gas, allowing the sensor to cool, thereby locking in the gas content of the sensor material, and taking the difference between the starting and ending resonant wavelengths as an indication of the concentration of the gas in the ambient atmosphere.

  15. Cryogenic, Absolute, High Pressure Sensor

    Chapman, John J. (Inventor); Shams. Qamar A. (Inventor); Powers, William T. (Inventor)

    2001-01-01

    A pressure sensor is provided for cryogenic, high pressure applications. A highly doped silicon piezoresistive pressure sensor is bonded to a silicon substrate in an absolute pressure sensing configuration. The absolute pressure sensor is bonded to an aluminum nitride substrate. Aluminum nitride has appropriate coefficient of thermal expansion for use with highly doped silicon at cryogenic temperatures. A group of sensors, either two sensors on two substrates or four sensors on a single substrate are packaged in a pressure vessel.

  16. Cryogenic High Pressure Sensor Module

    Chapman, John J. (Inventor); Shams, Qamar A. (Inventor); Powers, William T. (Inventor)

    1999-01-01

    A pressure sensor is provided for cryogenic, high pressure applications. A highly doped silicon piezoresistive pressure sensor is bonded to a silicon substrate in an absolute pressure sensing configuration. The absolute pressure sensor is bonded to an aluminum nitride substrate. Aluminum nitride has appropriate coefficient of thermal expansion for use with highly doped silicon at cryogenic temperatures. A group of sensors, either two sensors on two substrates or four sensors on a single substrate are packaged in a pressure vessel.

  17. Nanowire sensor, sensor array, and method for making the same

    Yun, Minhee (Inventor); Myung, Nosang (Inventor); Vasquez, Richard (Inventor); Homer, Margie (Inventor); Ryan, Margaret (Inventor); Yen, Shiao-Pin (Inventor); Fleurial, Jean-Pierre (Inventor); Bugga, Ratnakumar (Inventor); Choi, Daniel (Inventor); Goddard, William (Inventor)

    2012-01-01

    The present invention relates to a nanowire sensor and method for forming the same. More specifically, the nanowire sensor comprises at least one nanowire formed on a substrate, with a sensor receptor disposed on a surface of the nanowire, thereby forming a receptor-coated nanowire. The nanowire sensor can be arranged as a sensor sub-unit comprising a plurality of homogeneously receptor-coated nanowires. A plurality of sensor subunits can be formed to collectively comprise a nanowire sensor array. Each sensor subunit in the nanowire sensor array can be formed to sense a different stimulus, allowing a user to sense a plurality of stimuli. Additionally, each sensor subunit can be formed to sense the same stimuli through different aspects of the stimulus. The sensor array is fabricated through a variety of techniques, such as by creating nanopores on a substrate and electrodepositing nanowires within the nanopores.

  18. Handheld Broadband Electromagnetic UXO Sensor

    Won, I. J; San Filipo, William A; Marqusee, Jeffrey; Andrews, Anne; Robitaille, George; Fairbanks, Jeffrey; Overbay, Larry

    2005-01-01

    The broadband electromagnetic sensor improvement and demonstration undertaken in this project took the prototype GEM-3 and evolved it into an operational sensor with increased bandwidth and dynamic...

  19. Roadmap on optical sensors.

    Ferreira, Mário F S; Castro-Camus, Enrique; Ottaway, David J; López-Higuera, José Miguel; Feng, Xian; Jin, Wei; Jeong, Yoonchan; Picqué, Nathalie; Tong, Limin; Reinhard, Björn M; Pellegrino, Paul M; Méndez, Alexis; Diem, Max; Vollmer, Frank; Quan, Qimin

    2017-08-01

    Sensors are devices or systems able to detect, measure and convert magnitudes from any domain to an electrical one. Using light as a probe for optical sensing is one of the most efficient approaches for this purpose. The history of optical sensing using some methods based on absorbance, emissive and florescence properties date back to the 16th century. The field of optical sensors evolved during the following centuries, but it did not achieve maturity until the demonstration of the first laser in 1960. The unique properties of laser light become particularly important in the case of laser-based sensors, whose operation is entirely based upon the direct detection of laser light itself, without relying on any additional mediating device. However, compared with freely propagating light beams, artificially engineered optical fields are in increasing demand for probing samples with very small sizes and/or weak light-matter interaction. Optical fiber sensors constitute a subarea of optical sensors in which fiber technologies are employed. Different types of specialty and photonic crystal fibers provide improved performance and novel sensing concepts. Actually, structurization with wavelength or subwavelength feature size appears as the most efficient way to enhance sensor sensitivity and its detection limit. This leads to the area of micro- and nano-engineered optical sensors. It is expected that the combination of better fabrication techniques and new physical effects may open new and fascinating opportunities in this area. This roadmap on optical sensors addresses different technologies and application areas of the field. Fourteen contributions authored by experts from both industry and academia provide insights into the current state-of-the-art and the challenges faced by researchers currently. Two sections of this paper provide an overview of laser-based and frequency comb-based sensors. Three sections address the area of optical fiber sensors, encompassing both

  20. Roadmap on optical sensors

    Ferreira, Mário F. S.; Castro-Camus, Enrique; Ottaway, David J.; López-Higuera, José Miguel; Feng, Xian; Jin, Wei; Jeong, Yoonchan; Picqué, Nathalie; Tong, Limin; Reinhard, Björn M.; Pellegrino, Paul M.; Méndez, Alexis; Diem, Max; Vollmer, Frank; Quan, Qimin

    2017-08-01

    Sensors are devices or systems able to detect, measure and convert magnitudes from any domain to an electrical one. Using light as a probe for optical sensing is one of the most efficient approaches for this purpose. The history of optical sensing using some methods based on absorbance, emissive and florescence properties date back to the 16th century. The field of optical sensors evolved during the following centuries, but it did not achieve maturity until the demonstration of the first laser in 1960. The unique properties of laser light become particularly important in the case of laser-based sensors, whose operation is entirely based upon the direct detection of laser light itself, without relying on any additional mediating device. However, compared with freely propagating light beams, artificially engineered optical fields are in increasing demand for probing samples with very small sizes and/or weak light-matter interaction. Optical fiber sensors constitute a subarea of optical sensors in which fiber technologies are employed. Different types of specialty and photonic crystal fibers provide improved performance and novel sensing concepts. Actually, structurization with wavelength or subwavelength feature size appears as the most efficient way to enhance sensor sensitivity and its detection limit. This leads to the area of micro- and nano-engineered optical sensors. It is expected that the combination of better fabrication techniques and new physical effects may open new and fascinating opportunities in this area. This roadmap on optical sensors addresses different technologies and application areas of the field. Fourteen contributions authored by experts from both industry and academia provide insights into the current state-of-the-art and the challenges faced by researchers currently. Two sections of this paper provide an overview of laser-based and frequency comb-based sensors. Three sections address the area of optical fiber sensors, encompassing both

  1. Representación del Conocimiento en curriculo mediante esquemas preconceptuales

    Carlos Mario Zapata

    2011-09-01

    Full Text Available El concepto de currículo se torna más y más complejo en tanto aparecen nuevos estudios que lo complementan. Como consecuencia, los modelos que, gráfica o formalmente, tratan de representar el conocimiento alrededor del currículo se ocupan cada vez más de aspectos locales, de este modo le restan generalidad de comprensión. Por ello, en este artículo de investigación se realiza una revisión acerca de los diferentes enfoques del currículo a lo largo del siglo XX y de los modelos que representan este concepto. Finalmente, se propone una representación integradora de las diferentes visiones de currículo mediante los denominados esquemas preconceptuales, que consisten en diagramas para la representación del conocimiento cercanos al lenguaje natural

  2. CONTROL ROBUSTO DE UN SISTEMA MECÁNICO SIMPLE MEDIANTE UNA HERRAMIENTA GRAFICA

    LUINI HURTADO CORTÉS

    2010-01-01

    Full Text Available en este artículo se presenta el diseño de un controlador robusto para un sistema masaresorteamortiguador . Con el fin de realizar un diseño simple, se tomó en cuenta únicamente la incertidumbre en los parámetros de la planta. Los cálculos del problema se realizaron con una interfaz gráfica desarrollada para el diseño de controladores robustos, disponible para la Toolbox de Control Robusto de Matlab Ò . Se pretende que este ejercicio sirva como tutorial de introducción al análisis y diseño de sistemas de control robusto mediante el uso de la interfaz gráfica.

  3. PROMOCIÓN DE LA LECTURA E IDENTIDAD DEPORTIVA MEDIANTE TEXTOS DE HISTORIA DEL DEPORTE

    José Guillermo Montero Quesada

    2016-04-01

    Full Text Available En el artículo se expone una experiencia de promoción de la lectura desarrollada mediante un proyecto conjunto de la Facultad de Cultura Física y la biblioteca de la Universidad de Las Tunas. Se fundamenta en aspectos teóricos de la promoción de la lectura y de la identidad deportiva, ambas variables tienen salida práctica en actividades donde confluyen diversas manifestaciones del arte y la literatura con la actividad física y el deporte. El objetivo del trabajo consiste en reflexionar en torno a la necesidad de asumir alternativas de cómo influir en la formación integral de los estudiantes universitarios de la carrera de Cultura Física, con énfasis en los conocimientos históricos y culturales.

  4. Predictor de Smith modificado mediante un modelo interno, robusto a perturbaciones externas no medibles.

    Fernando Castillo García

    2010-11-01

    Full Text Available Normal 0 21 false false false MicrosoftInternetExplorer4 Se propone una modificación de la estructura del predictor de Smith mediante un modelo interno que posibilita aumentar su rechazo al efecto de las per-turbaciones externas no medibles en comparación con la estructura clásica del predictor de Smith. Los resultados obtenidos se aplican en el diseño de un sistema de control del proceso de variación de la temperatura del jugo en los calentadores de una fábrica de azúcar. Los resultados de la simulación del sistema diseñado mostraron su efectividad y robustez en cuanto al rechazo de perturbaciones externas no medibles. Palabras claves: Predictor de Smith, predictor de Smith modificado, rechazo a perturbaciones externas no medibles, robustez de los sistemas de control.

  5. Fomento de la conciencia ambiental mediante el blog UNAECOLÓGICA

    Nereidy Velásquez

    2016-01-01

    Full Text Available El propósito del artículo es presentar una propuesta para fomentar la conciencia ambiental mediante el uso del blog. En este trabajo se organizaron los referentes teóricos relacionados con la educación ambiental y con la web, la cual constituye un espacio que ofrece información consistente y veraz sobre cualquier temática. El blog UNAECOLÓGICA es una propuesta que se crea con el fin de generar espacios para la comunicación, la interacción, la construcción del conocimiento ambiental y estimular en la comunidad unista la participación, la empatía y la solidaridad hacia su entorno.  Entre algunas de las secciones que presenta UNAECOLÓGICA, se encuentran: Notiambiente, Literambiente, Ecorelatos. Ecofrases, entre otras.

  6. DETECCIÓN Y AISLAMIENTO ROBUSTO DE FALLAS MEDIANTE OBSERVADORES CON ENTRADAS DESCONOCIDAS

    JUAN ANZUREZ MARÍN

    2009-01-01

    Full Text Available En el presente artículo se muestra una metodología de diseño de observadores con entradas desconocidas para la solución del problema de Detección de Fallas. La técnica propuesta se basa principalmente en la observación de señales de error conocidas como residuos, las cuales se obtienen mediante la diferencia entre la salida actual del sistema y la salida estimada. Un observador con entradas desconocidas tiene la particularidad de que su vector de error de estimación tiende a cero asintóticamente, sin considerar la presencia de las entradas desconocidas o perturbaciones en el sistema. El algoritmo de detección se aplica satisfactoriamente en un sistema hidráulico de nivel de líquido tanto en simulación como en tiempo real.

  7. Generación de nuevos significados, mediante la metonimia, en el parlache

    Juan Manuel Pérez Sánchez

    2009-04-01

    Full Text Available Reconociendo la incidencia del cambio semántico en el argot, se analiza aquí el papel de la metonimia como mecanismo de generación de nuevos significados en el argot juvenil de Medellín (Colombia, conocido como parlache. Como punto de partida, se delimita el concepto de argot y se clarifica lo que aquí se entiende por metonimia. Tras estas precisiones, se analiza una muestra de doce significados argóticos generados a partir de unidades ya existentes y mediante procesos metonímicos. Por último, como resultados, se observan tendencias dentro de la muestra en la utilización mayoritaria de ciertos tipos de metonimia. Así mismo, se vislumbra que en la muestra priman principios cognitivos universales como ''típico sobre atípico'', ''corporal sobre mental'', ''concreto sobre abstracto'', entre otros, a la hora de elegir los conceptos fuente.

  8. Medida de la dureza de sólidos mediante nanoindentación

    Alkorta, J.

    2005-10-01

    Full Text Available Hardness is not readily measurable by means of instrumented indentation since the value of the contact area depends on the pile-up or sink-in occurring near the contact surface of the sample. The most widespread method to estimate it by means of the loading/unloading curve of indentation, Oliver and Pharr’s method, deviates, in the extreme cases, up to a 25% from the real values since it only takes into account the elastic deflection. In this work, a new correction based on Oliver and Pharr’s method is proposed that agrees with the numerical calculations. Plastic hardening behaviour of the sample must be known to accurately estimate the contact area.

    La medida de la dureza mediante indentación con registro de carga y desplazamiento no es evidente, dada la incertidumbre sobre el tamaño de huella debido al levantamiento (pile-up o hundimiento (sink-in plásticos de la superficie de la muestra alrededor del indentador. El método más utilizado para la medida de la dureza mediante la curva de carga/descarga de indentación, el de Oliver y Pharr, sólo tiene en cuenta hundimiento elástico, por lo que el error en la medida de la dureza y el módulo de Young puede llegar hasta un 25% en los casos más extremos. En el presente trabajo se discute una posible corrección al método de Oliver y Pharr para una obtención más ajustada del área de contacto de la huella. Esta corrección requiere de un conocimiento a priori o a posteriori del comportamiento plástico del material.

  9. Semiconductor acceleration sensor

    Ueyanagi, Katsumichi; Kobayashi, Mitsuo; Goto, Tomoaki

    1996-09-01

    This paper reports a practical semiconductor acceleration sensor especially suited for automotive air bag systems. The acceleration sensor includes four beams arranged in a swastika structure. Two piezoresistors are formed on each beam. These eight piezoresistors constitute a Wheatstone bridge. The swastika structure of the sensing elements, an upper glass plate and a lower glass plate exhibit the squeeze film effect which enhances air dumping, by which the constituent silicon is prevented from breakdown. The present acceleration sensor has the following features. The acceleration force component perpendicular to the sensing direction can be cancelled. The cross-axis sensitivity is less than 3 percent. And, the erroneous offset caused by the differences between the thermal expansion coefficients of the constituent materials can be canceled. The high aspect ratio configuration realized by plasma etching facilitates reducing the dimensions and improving the sensitivity of the acceleration sensor. The present acceleration sensor is 3.9 mm by 3.9 mm in area and 1.2 mm in thickness. The present acceleration sensor can measure from -50 to +50 G with sensitivity of 0.275 mV/G and with non-linearity of less than 1 percent. The acceleration sensor withstands shock of 3000 G.

  10. Advanced Magnetoimpedance Sensors

    Li, Bodong

    2015-02-01

    This thesis is concerned with the advanced topics of thin film magnetoimpedance (MI) sensors. The author proposes and develops novel MI sensors that target on the challenges arising from emerging applications such as flexible electronics, passive wireless sensing, etc. In the study of flexible MI sensor, the investigated sensors of NiFe/Cu/NiFe tri-layersare fabricated on three flexible substrates having different surface roughness: Kapton, standard and premiumphotopaper. Sensitivity versus substrate roughness analysis is carried out for the selection of optimal substrate material. The high magnetic sensing performance is achieved by using Kapton substrate. Stress simulation, incorporated with the theory of magnetostriction effect, reveals the material composition of Ni/Fe being as a key factor of the stress dependent MI effect for the flexible MI sensors. In the development of MI-SAW device for passive wireless magnetic field sensing, NiFe/Cu/NiFe tri-layersand interdigital transducers(IDT) are designed and fabricated on a single piece of LiNbO3substrate, providing a high degree of integration and the advantage of standard microfabrication. The double-electrodeIDT has been utilized and proven to have an optimal sensing performance in comparison to the bi-directional IDT design. The optimized high frequency performance of the thin film MI sensor results in a MI-SAW passive wireless magnetic sensor with high magnetic sensitivity comparing to the MI microwire approach. Benefiting from the high degree of integration of the MI thin film element, in the following study, two additional sensing elements are integrated to the SAW device to have a multifunctional passive wireless sensor with extended temperature and humidity sensing capabilities. Analytical models havebeen developed to eliminate the crossovers of different sensing signals through additional reference IDTs, resulting in a multifunctional passive wireless sensor with the capability of detecting all three

  11. Micro Coriolis mass flow sensor with integrated resistive pressure sensors

    Groenesteijn, Jarno; Alveringh, Dennis; Schut, Thomas; Wiegerink, Remco J.; Sparreboom, Wouter; Lötters, Joost Conrad

    2017-01-01

    We report on novel resistive pressure sensors, integrated on-chip at the inlet- and outlet-channels of a micro Coriolis mass flow sensor. The pressure sensors can be used to measure the pressure drop over the Coriolis sensor which can be used to compensate pressure-dependent behaviour that might

  12. Resistive pressure sensors integrated with a Coriolis mass flow sensor

    Alveringh, Dennis; Schut, Thomas; Wiegerink, Remco J.; Sparreboom, Wouter; Lötters, Joost Conrad

    2017-01-01

    We report on a novel resistive pressure sensor that is completely integrated with a Coriolis mass flow sensor on one chip, without the need for extra fabrication steps or different materials. Two pressure sensors are placed in-line with the Coriolis sensor without requiring any changes to the fluid

  13. Consistent sensor, relay, and link selection in wireless sensor networks

    Arroyo Valles, M.D.R.; Simonetto, A.; Leus, G.J.T.

    2017-01-01

    In wireless sensor networks, where energy is scarce, it is inefficient to have all nodes active because they consume a non-negligible amount of battery. In this paper we consider the problem of jointly selecting sensors, relays and links in a wireless sensor network where the active sensors need

  14. Procedimiento para la obtención de levaduras vínicas superproductoras de manoproteínas mediante tecnologías no recombinantes

    Barcenilla Moraleda, José María; González Ramos, Daniel; Tabera, Laura; González García, Ramón

    2008-01-01

    Procedimiento para la obtención de levaduras vínicas superproductoras de manoproteínas mediante tecnologías no recombinantes. Procedimiento para obtener cepas de levaduras superproductoras de manoproteínas mediante la selección de mutantes resistentes a la toxina K9, cepas obtenibles por dicho procedimiento y usos.

  15. Urodynamic pressure sensor

    Moore, Thomas

    1991-01-01

    A transducer system was developed for measuring the closing pressure profile along the female urethra, which provides up to five sensors within the functional length of the urethra. This new development is an improvement over an earlier measurement method that has a smaller sensor area and was unable to respond to transient events. Three sensors were constructed; one of them was subjected to approximately eight hours of use in a clinical setting during which 576 data points were obtained. The complete instrument system, including the signal conditioning electronics, data acquisition unit, and the computer with its display and printer is described and illustrated.

  16. Electrocatalytic cermet sensor

    Shoemaker, Erika L.; Vogt, Michael C.

    1998-01-01

    A sensor for O.sub.2 and CO.sub.2 gases. The gas sensor includes a plurality of layers driven by a cyclic voltage to generate a unique plot characteristic of the gas in contact with the sensor. The plurality of layers includes an alumina substrate, a reference electrode source of anions, a lower electrical reference electrode of Pt coupled to the reference source of anions, a solid electrolyte containing tungsten and coupled to the lower reference electrode, a buffer layer for preventing flow of Pt ions into the solid electrolyte and an upper catalytically active Pt electrode coupled to the buffer layer.

  17. Sensors in Education

    Van Rosmalen, Peter; Schneider, Jan; Börner, Dirk

    2014-01-01

    Sensors rapidly become available both for personal as well as scientific use. A wide range of applications exists for personal use e.g. safety in and around the house, sport, fitness and health. In this workshop we will explore how sensors are (can be) used in education. We start with an introduction on sensors and their use, discuss the FP7 project METALOGUE (www.metalogue.eu), a Multi-perspective Multi-modal Dialogue system, and close with a hands-on and a discussion of the design of the Pr...

  18. Characterization of Pixel Sensors

    Oliveira, Felipe Ferraz

    2017-01-01

    It was commissioned at CERN ATLAS pixel group a fluorescence setup for characterization of pixel sensors. The idea is to measure the energies of different targets to calibrate your sensor. It was measured four matrices (80, 95, 98 and 106) of the Investigator1 sensor with different deep PW using copper, iron and titanium as target materials. The matrix 80 has a higher gain (0.065 ± 0.002) and matrix 106 has a better energy resolution (0.05 ± 0.04). The noise of the setup is around 3.6 mV .

  19. RADIOACTIVE MATERIALS SENSORS

    Mayo, Robert M.; Stephens, Daniel L.

    2009-01-01

    Providing technical means to detect, prevent, and reverse the threat of potential illicit use of radiological or nuclear materials is among the greatest challenges facing contemporary science and technology. In this short article, we provide brief description and overview of the state-of-the-art in sensor development for the detection of radioactive materials, as well as an identification of the technical needs and challenges faced by the detection community. We begin with a discussion of gamma-ray and neutron detectors and spectrometers, followed by a description of imaging sensors, active interrogation, and materials development, before closing with a brief discussion of the unique challenges posed in fielding sensor systems.

  20. Wireless passive radiation sensor

    Pfeifer, Kent B; Rumpf, Arthur N; Yelton, William G; Limmer, Steven J

    2013-12-03

    A novel measurement technique is employed using surface acoustic wave (SAW) devices, passive RF, and radiation-sensitive films to provide a wireless passive radiation sensor that requires no batteries, outside wiring, or regular maintenance. The sensor is small (<1 cm.sup.2), physically robust, and will operate unattended for decades. In addition, the sensor can be insensitive to measurement position and read distance due to a novel self-referencing technique eliminating the need to measure absolute responses that are dependent on RF transmitter location and power.

  1. Professional Android Sensor Programming

    Milette, Greg

    2012-01-01

    Learn to build human-interactive Android apps, starting with device sensors This book shows Android developers how to exploit the rich set of device sensors—locational, physical (temperature, pressure, light, acceleration, etc.), cameras, microphones, and speech recognition—in order to build fully human-interactive Android applications. Whether providing hands-free directions or checking your blood pressure, Professional Android Sensor Programming shows how to turn possibility into reality. The authors provide techniques that bridge the gap between accessing sensors and putting the

  2. The Geographical Information System for the Renewable Energies (SIGER) in Mexico; El Sistema de Informacion Geografica para las Energias Renovables (SIGER) en Mexico

    Miranda M, Ubaldo; Saldana F, Ricardo; Morales R, M. Flor [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2003-07-01

    At the moment, the geographic information systems GIS (SIG) are used in a great variety of areas of the knowledge. For example, it is common to see that the management of municipal networks, such as: potable water, drainage, etc., is made by means of these systems. Also, the analysis of the ground cover from information of remote sensors; or, the study of the spatial behavior of the diseases. [Spanish] Actualmente, los sistemas de informacion geografica (SIG) se emplean en una gran variedad de areas del conocimiento. Por ejemplo, es comun ver que la gestion de redes municipales, como son: agua potable, drenaje, etc., se haga mediante estos sistemas. Lo mismo el analisis de cobertura del suelo a partir de informacion de sensores remotos; o bien, el estudio del comportamiento espacial de las enfermedades.

  3. Surfactant Sensors in Biotechnology; Part 1 – Electrochemical Sensors

    Milan Sak-Bosnar

    2004-01-01

    Full Text Available An overview on electrochemical surfactant sensors is given with special attention to papers published since 1993. The importance of surfactants in modern biotechnology is stressed out. Electrochemical sensors are usually divided according to the measured physical quantity to potentiometric, amperometric, conductometric and impedimetric surfactant sensors. The last ones are very few. Potentiometric surfactant sensors are the most numerous due to their simplicity and versatility. They can be used either as end-point titration sensors or as direct EMF measurement sensors, in batch or flow-through mode. Some amperometric surfactant sensors are true biosensors that use microorganisms or living cells.

  4. Superficie específica de una bentonita mediante la adsorción de azul de metileno

    Pinzón Bello, Jorge Alejo

    2010-01-01

    Se estudió la determinación de la superficie específica de una bentonita colombiana, procedente del Valle del Cauca, mediante la adsorción de azul de metileno, a 298 K. Este método se comparó con el de la adsorción de nitrógeno a 77 K.

  5. Sensor employing internal reference electrode

    2013-01-01

    The present invention concerns a novel internal reference electrode as well as a novel sensing electrode for an improved internal reference oxygen sensor and the sensor employing same.......The present invention concerns a novel internal reference electrode as well as a novel sensing electrode for an improved internal reference oxygen sensor and the sensor employing same....

  6. Magnetic Nanocomposite Cilia Tactile Sensor

    Alfadhel, Ahmed

    2015-10-21

    A multifunctional biomimetic nanocomposite tactile sensor is developed that can detect shear and vertical forces, feel texture, and measure flow with extremely low power consumption. The sensor\\'s high performance is maintained within a wide operating range that can be easily adjusted. The concept works on rigid and flexible substrates and the sensors can be used in air or water without any modifications.

  7. Downhole pressure sensor

    Berdahl, C. M.

    1980-01-01

    Sensor remains accurate in spite of varying temperatures. Very accurate, sensitive, and stable downhole pressure measurements are needed for vaiety of reservoir engineering applications, such as deep petroleum reservoirs, especially gas reservoirs, and in areas of high geothermal gradient.

  8. Reconfigurable Sensor Monitoring System

    Alhorn, Dean C. (Inventor); Dutton, Kenneth R. (Inventor); Howard, David E. (Inventor); Smith, Dennis A. (Inventor)

    2017-01-01

    A reconfigurable sensor monitoring system includes software tunable filters, each of which is programmable to condition one type of analog signal. A processor coupled to the software tunable filters receives each type of analog signal so-conditioned.

  9. Sensor for metal detection

    Kodzius, Rimantas; Zhao, Guoqing

    2014-01-01

    fluid, peritoneal fluid, pleural fluid, pericardial fluid, joint fluid, and amniotic fluid, water sample, food sample, air sample, and soil sample (all claimed). ADVANTAGE - The sensor for use with the portable analytical instrument is configured

  10. Magnetic Nanocomposite Cilia Sensors

    Alfadhel, Ahmed

    2016-01-01

    Recent progress in the development of artificial skin concepts is a result of the increased demand for providing environment perception such as touch and flow sensing to robots, prosthetics and surgical tools. Tactile sensors are the essential

  11. Parachute Cord Tension Sensor

    National Aeronautics and Space Administration — To design and fabricate a light weight (few oz), very small (~2 inch length) parachute cord tension sensor demonstrator device.A major challenge for the CPAS (The...

  12. Modular sensor network node

    Davis, Jesse Harper Zehring [Berkeley, CA; Stark, Jr., Douglas Paul; Kershaw, Christopher Patrick [Hayward, CA; Kyker, Ronald Dean [Livermore, CA

    2008-06-10

    A distributed wireless sensor network node is disclosed. The wireless sensor network node includes a plurality of sensor modules coupled to a system bus and configured to sense a parameter. The parameter may be an object, an event or any other parameter. The node collects data representative of the parameter. The node also includes a communication module coupled to the system bus and configured to allow the node to communicate with other nodes. The node also includes a processing module coupled to the system bus and adapted to receive the data from the sensor module and operable to analyze the data. The node also includes a power module connected to the system bus and operable to generate a regulated voltage.

  13. Uncooled tunneling infrared sensor

    Kenny, Thomas W. (Inventor); Kaiser, William J. (Inventor); Podosek, Judith A. (Inventor); Vote, Erika C. (Inventor); Muller, Richard E. (Inventor); Maker, Paul D. (Inventor)

    1995-01-01

    An uncooled infrared tunneling sensor in which the only moving part is a diaphragm which is deflected into contact with a micromachined silicon tip electrode prepared by a novel lithographic process. Similarly prepared deflection electrodes employ electrostatic force to control the deflection of a silicon nitride, flat diaphragm membrane. The diaphragm exhibits a high resonant frequency which reduces the sensor's sensitivity to vibration. A high bandwidth feedback circuit controls the tunneling current by adjusting the deflection voltage to maintain a constant deflection of the membrane. The resulting infrared sensor can be miniaturized to pixel dimensions smaller than 100 .mu.m. An alternative embodiment is implemented using a corrugated membrane to permit large deflection without complicated clamping and high deflection voltages. The alternative embodiment also employs a pinhole aperture in a membrane to accommodate environmental temperature variation and a sealed chamber to eliminate environmental contamination of the tunneling electrodes and undesireable accoustic coupling to the sensor.

  14. Graphene Chemical Sensor Project

    National Aeronautics and Space Administration — Develop graphene based miniaturized chemical sensors that will be able to detect gaseous and volatile molecules with high sensitivity, good reproducibility and wide...

  15. Graphene Chemical Sensor

    National Aeronautics and Space Administration — Develop graphene based miniaturized chemical sensors that will be able to detect gaseous and volatile molecules with high sensitivity, good reproducibility and wide...

  16. Wearable Optical Sensors

    Ballard, Zachary S.; Ozcan, Aydogan

    2017-01-01

    The market for wearable sensors is predicted to grow to $5.5 billion by 2025, impacting global health in unprecedented ways. Optics and photonics will play a key role in the future of these wearable technologies, enabling highly sensitive

  17. Microsoft Kinect Sensor Evaluation

    Billie, Glennoah

    2011-01-01

    My summer project evaluates the Kinect game sensor input/output and its suitability to perform as part of a human interface for a spacecraft application. The primary objective is to evaluate, understand, and communicate the Kinect system's ability to sense and track fine (human) position and motion. The project will analyze the performance characteristics and capabilities of this game system hardware and its applicability for gross and fine motion tracking. The software development kit for the Kinect was also investigated and some experimentation has begun to understand its development environment. To better understand the software development of the Kinect game sensor, research in hacking communities has brought a better understanding of the potential for a wide range of personal computer (PC) application development. The project also entails the disassembly of the Kinect game sensor. This analysis would involve disassembling a sensor, photographing it, and identifying components and describing its operation.

  18. Magnetic Resonance Sensors

    Robert H. Morris

    2014-11-01

    Full Text Available Magnetic Resonance finds countless applications, from spectroscopy to imaging, routinely in almost all research and medical institutions across the globe. It is also becoming more frequently used for specific applications in which the whole instrument and system is designed for a dedicated application. With beginnings in borehole logging for the petro-chemical industry Magnetic Resonance sensors have been applied to fields as varied as online process monitoring for food manufacture and medical point of care diagnostics. This great diversity is seeing exciting developments in magnetic resonance sensing technology published in application specific journals where they are often not seen by the wider sensor community. It is clear that there is enormous interest in magnetic resonance sensors which represents a significant growth area. The aim of this special edition of Sensors was to address the wide distribution of relevant articles by providing a forum to disseminate cutting edge research in this field in a single open source publication.[...

  19. GAINT magnetoimpedance sensors

    Hauser, H.; Kraus, Luděk; Ripka, P.

    xx, - (2001), s. 28-32 ISSN 1094-6969 Institutional research plan: CEZ:AV0Z1010914 Keywords : wireless sensor * distant measurement of magnetic fields Subject RIV: BM - Solid Matter Physics ; Magnetism

  20. Thermal microphotonic sensor and sensor array

    Watts, Michael R [Albuquerque, NM; Shaw, Michael J [Tijeras, NM; Nielson, Gregory N [Albuquerque, NM; Lentine, Anthony L [Albuquerque, NM

    2010-02-23

    A thermal microphotonic sensor is disclosed for detecting infrared radiation using heat generated by the infrared radiation to shift the resonant frequency of an optical resonator (e.g. a ring resonator) to which the heat is coupled. The shift in the resonant frequency can be determined from light in an optical waveguide which is evanescently coupled to the optical resonator. An infrared absorber can be provided on the optical waveguide either as a coating or as a plate to aid in absorption of the infrared radiation. In some cases, a vertical resonant cavity can be formed about the infrared absorber to further increase the absorption of the infrared radiation. The sensor can be formed as a single device, or as an array for imaging the infrared radiation.

  1. Sensor for ionizable elements

    Berkey, E.; Reed, W.A. III; Hickam, W.M.

    1977-01-01

    Sensor to detect thermally ionizable elements or molucules in air, water vapour or oxygen or to be used as alkali leak detector in vacuum systems, e.g. in the pipe system of a liquid-metal cooled FBR. The sensor consists of an filament made of thorium-containing iridium as cathode with a temperature upto 1000 0 C and an anode sheet of molybdenum, nickel or stainless steal. (ORU) [de

  2. Organic magnetic field sensor

    McCamey, Dane; Boehme, Christoph

    2017-01-24

    An organic, spin-dependent magnetic field sensor (10) includes an active stack (12) having an organic material with a spin-dependence. The sensor (10) also includes a back electrical contact (14) electrically coupled to a back of the active stack (12) and a front electrical contact (16) electrically coupled to a front of the active stack (12). A magnetic field generator (18) is oriented so as to provide an oscillating magnetic field which penetrates the active stack (12).

  3. Novel PET sensors

    Cooper, C.R.

    2001-03-01

    This thesis describes the design, synthesis and evaluation of novel molecular sensors that utilize the phenomena of Photoinduced Electron Transfer (PET). PET design can be incorporated into molecules to allow them to selectively bind certain guest molecules. PET works by the modulation of electron potentials within a molecule. Binding events between a host and guest can, if designed suitably, change these potentials enough to cause a transfer of electronic charge within the molecular sensor. This event can be accurately and sensitively monitored by the use of ultra violet or fluorescence spectroscopy. A sensor molecule can be constructed by matching the guest to a suitable receptor site and incorporating this into a molecule containing a fluorophore with the correct electron potential characteristics. By using existing synthetic routes as well as exploiting new pathways these sensor molecules C n be constructed to contain a fluorophore separated from a guest receptor(s) by suitable spacers units. When put together these facets go to creating molecules that by design are sensitive and selective for certain guest molecules or functional groups. This methodology allows the synthetic chemist to rationally design and synthesise PET sensors, tailored to the needs of the guest. In this thesis the synthesis and evaluation of a novel PET sensors for D-glucosamine, disaccharides and fluoride is presented. It is believed that the novel sensors using the PET phenomenon presented in this thesis are a worthwhile extension of previous works undertaken by other groups around the world and shows new pathways to increasingly complex and sophisticated sensor molecular design. (author)

  4. Wireless radiation sensor

    Lamberti, Vincent E.; Howell, Jr, Layton N.; Mee, David K.; Kress, Reid L.

    2016-08-09

    Disclosed is a sensor for detecting radiation. The sensor includes a ferromagnetic metal and a radiation sensitive material coupled to the ferromagnetic metal. The radiation sensitive material is operable to change a tensile stress of the ferromagnetic metal upon exposure to radiation. The radiation is detected based on changes in the magnetic switching characteristics of the ferromagnetic metal caused by the changes in the tensile stress.

  5. Smart Sensors for Launch Vehicles

    Ray, Sabooj; Mathews, Sheeja; Abraham, Sheena; Pradeep, N.; Vinod, P.

    2017-12-01

    Smart Sensors bring a paradigm shift in the data acquisition mechanism adopted for launch vehicle telemetry system. The sensors integrate signal conditioners, digitizers and communication systems to give digital output from the measurement location. Multiple sensors communicate with a centralized node over a common digital data bus. An in-built microcontroller gives the sensor embedded intelligence to carry out corrective action for sensor inaccuracies. A smart pressure sensor has been realized and flight-proven to increase the reliability as well as simplicity in integration so as to obtain improved data output. Miniaturization is achieved by innovative packaging. This work discusses the construction, working and flight performance of such a sensor.

  6. Geographically distributed environmental sensor system

    French, Patrick; Veatch, Brad; O'Connor, Mike

    2006-10-03

    The present invention is directed to a sensor network that includes a number of sensor units and a base unit. The base station operates in a network discovery mode (in which network topology information is collected) in a data polling mode (in which sensed information is collected from selected sensory units). Each of the sensor units can include a number of features, including an anemometer, a rain gauge, a compass, a GPS receiver, a barometric pressure sensor, an air temperature sensor, a humidity sensor, a level, and a radiant temperature sensor.

  7. Flexible magnetoimpedance sensor

    Li, Bodong; Kavaldzhiev, Mincho N.; Kosel, Jürgen

    2015-01-01

    Flexible magnetoimpedance (MI) sensors fabricated using a NiFe/Cu/NiFe tri-layer on Kapton substrate have been studied. A customized flexible microstrip transmission line was employed to investigate the MI sensors's magnetic field and frequency responses and their dependence on the sensors's deflection. For the first time, the impedance characteristic is obtained through reflection coefficient analysis over a wide range of frequencies from 0.1 MHz to 3 GHz and for deflections ranging from zero curvature to a radius of 7.2 cm. The sensor element maintains a high MI ratio of up to 90% and magnetic sensitivity of up to 9.2%/Oe over different bending curvatures. The relationship between the curvature and material composition is discussed based on the magnetostriction effect and stress simulations. The sensor's large frequency range, simple fabrication process and high sensitivity provide a great potential for flexible electronics and wireless applications. - Highlights: • A flexible magnetoimpedance (MI) sensor is developed. • Studies are carried out using a flexible microstrip transmission line. • An MI ratio of up to 90% is obtained. • The effect of magnetostriction is studied

  8. Plataforma virtual para el análisis del rendimiento y la seguridad en redes de sensores inalámbricos

    Díaz Suárez, Álvaro

    2014-01-01

    En este trabajo se propone una plataforma virtual (Simulador de redes de sensores inalámbricas mediante software ejecutado en un PC) la cual integra simulación funcional de redes de sensores inalámbricas, integración de RTOS (Real-Time Operating System) y estimación de prestaciones (tiempo de ejecución y consumo), junto con la capacidad de simular de ataques. Además, el simulador ejecuta exactamente el mismo código que se ejecutará en el nodo físico y se generará exactamente el mismo tráfico ...

  9. Recubrimientos de TiN depositados mediante ACPVD sobre aleaciones de magnesio AM60

    Pichel, M.

    2013-06-01

    Full Text Available Magnesium alloys are reaching special interest due to their good specific properties, low cost and good manufacturing properties. However, their low hardness, wear and corrosion resistance limit their applications in certain sectors of industry. These drawbacks can be solved by applying hard ceramic coatings, such as nitrides or metal carbides. TiN is one of the most used coatings due to its high adhesion, hardness, low coefficient of friction and chemical stability. Physical vapor deposition by cathodic arc CAPVD, is a versatile technique, which uses low temperatures and high ionization energies, generating homogeneous coatings. To achieve coatings with high quality, a careful control of the manufacturing parameters is required, such as bias voltage, gas flow or intensity. This paper focuses on magnesium alloys, AM60, coated with TiN using physical vapor deposition cathodic arc technique (CAPVD at different intensity values (40A and 100A and surface preparation (grinding up to 4000 grit and polished to 3μm. It was included a final condition with an intermediate Al film. The samples were characterized by X-ray diffraction, roughness, optical microscopy and scanning electron.Las aleaciones de magnesio están alcanzando especial interés gracias a sus buenas propiedades específicas, bajo coste y buenas propiedades de moldeabilidad. No obstante su baja dureza, resistencia a desgaste y corrosión, limita sus aplicaciones en ciertos campos de la industria. Estos inconvenientes se pueden solucionar aplicando recubrimientos duros cerámicos, como nitruros o carburos metálicos. El TiN es uno de los más utilizados debido a su alta adherencia, dureza, bajo coeficiente de fricción y estabilidad química. La deposición física en fase vapor mediante arco catódico, ACPVD, es una técnica muy versátil, que emplea bajas temperaturas y altas energías de ionización, generando recubrimientos de bajo espesor, homogéneos y de calidad. Para alcanzar

  10. Semantically-Enabled Sensor Plug & Play for the Sensor Web

    Bröring, Arne; Maúe, Patrick; Janowicz, Krzysztof; Nüst, Daniel; Malewski, Christian

    2011-01-01

    Environmental sensors have continuously improved by becoming smaller, cheaper, and more intelligent over the past years. As consequence of these technological advancements, sensors are increasingly deployed to monitor our environment. The large variety of available sensor types with often incompatible protocols complicates the integration of sensors into observing systems. The standardized Web service interfaces and data encodings defined within OGC’s Sensor Web Enablement (SWE) framework make sensors available over the Web and hide the heterogeneous sensor protocols from applications. So far, the SWE framework does not describe how to integrate sensors on-the-fly with minimal human intervention. The driver software which enables access to sensors has to be implemented and the measured sensor data has to be manually mapped to the SWE models. In this article we introduce a Sensor Plug & Play infrastructure for the Sensor Web by combining (1) semantic matchmaking functionality, (2) a publish/subscribe mechanism underlying the SensorWeb, as well as (3) a model for the declarative description of sensor interfaces which serves as a generic driver mechanism. We implement and evaluate our approach by applying it to an oil spill scenario. The matchmaking is realized using existing ontologies and reasoning engines and provides a strong case for the semantic integration capabilities provided by Semantic Web research. PMID:22164033

  11. Tratamiento del polvo de aluminio mediante disolución acuosa

    López, F. A.

    2004-10-01

    Full Text Available Aluminium dust from aluminium remelting industry is a hazardous residue because of its high reactivity in the presence of water. In order to apply the new European Directive about landfill of waste, a study of its hydrolysis was carried out. The influence of temperature, time and pH on the hydrolysis of the aluminium dust was studied. The hydrolysed solids were characterized by XRD and AAS; in the aqueous solutions the pH and the ionic conductivity were determined. The evolved gases were analysed by mass spectrometry. The reactivity of the dust, before and after hydrolysis, was investigated by analysing the ammonia, hydrogen sulphide and metallic aluminium. By hydrolysis at 60 °C and 48 h a much lower reactive material was obtained which could be disposed with minimal environmental impact.

    El polvo de aluminio es un residuo generado en la metalurgia secundaria del aluminio y considerado peligroso como consecuencia de su elevada reactividad en presencia de humedad. Con objetivo de buscar un procedimiento de pretratamiento de dicho residuo, de acuerdo con la Directiva Europea sobre vertederos, se ha realizado el estudio del comportamiento del polvo de aluminio en medio acuoso. Para ello, se han analizado la influencia de la temperatura, el tiempo y el pH de reacción en su hidrólisis. Los sólidos hidrolizados se caracterizaron mediante EAA y DRX, mientras que en las soluciones acuosas resultantes se determinaron el pH y la conductividad iónica. Los gases liberados durante el proceso de hidrólisis se analizaron mediante espectrometría de masas. Asimismo, se ha determinado la reactividad del residuo antes y después de la hidrólisis, analizando amoniaco, sulfuro de hidrógeno y aluminio metálico. La hidrólisis, a 60 °C y después de 48 h, permite obtener material de muy baja reactividad que podría ser almacenado en vertedero.

  12. Estudio mediante afm de estructuras de silicalita para la separación de gases

    Prádanos, P.

    2004-02-01

    Full Text Available In this work, we study films of silicalite crystals used in gas separation processes. These crystals were obtained by hydrothermal synthesis during different times and using different gel composition. They were deposited on an alumina support growing in two preferential directions. Finally, the material was placed in a stove at 480ºC during 8 h in order to remove the structurant agent with heating and cooling rates of 0.5 y 2 ºC/min respectively. The resulting surfaces were analysed by atomic force microscopy (AFM in tapping mode in order to notice the deposition of the silicalite crystals in the indicated directions, and also to distinguish the evolution of the nuclei growth. At the same time, the porous structure of silicalite has been determined, leading to results in good agreement with those obtained by other techniques.

    En este trabajo se han estudiado láminas de silicalita con aplicación en los procesos de separación de gases. Dichas láminas se han depositado mediante síntesis hidrotermal durante distintos tiempos y usando varias composiciones en el gel precursor. La deposición se hizo sobre un soporte de alúmina con crecimiento preferencial en dos direcciones. Finalmente las láminas se calcinaron a 753 K durante 8 h para eliminar el agente estructurante, usando velocidades de calentamiento y enfriamiento de 0.5 y 1 K/min respectivamente. Las superficies resultantes se han analizado mediante microscopía de fuerza atómica en modo de contacto-intermitente (tapping con el fin de ver si efectivamente se ha conseguido depositar cristales de silicalita en las direcciones indicadas y seguir la evolución de crecimiento de los núcleos. Por otro lado, se ha determinado la estructura porosa de la silicalita comprobando que los resultados concuerdan con los obtenidos por otras técnicas.

  13. Microestructura y propiedades de capas de tribaloy T-800 depositadas mediante plaqueado láser

    Navas, C.

    2004-04-01

    Full Text Available The present work is based on obtaining Co based coatings (Tribaloy T-800 on plates of 18/8 stainless steel (AISI 304 by laser cladding technique. After the treatment, samples were characterized by optical and scanning electron microscopy with EDS analysis. The elemental composition of the coating was determined with a glow discharge lamp spectrometer (GDL. The study of the interface revealed a good adherence between the substrate and coating without substantial defects. For the laser cladded coatings, the microstructure was dendritic with a high degree of refinement and chemical homogeneity close to the original powder. The grain coarsening was observed in the overlapping zones due to the second heat treatment. Microhardness of the coatings reached 750 HV, a considerably higher value than the substrate hardness (200 HV. Also, the coating corrosion resistance in saline solutions had a great improvement.

    El presente trabajo se centra en la obtención de capas de aleación base Cobalto (Tribaloy T-800 sobre un sustrato de acero inoxidable 18/8 (AISI 304 mediante la técnica de plaqueado láser. Tras los tratamientos, se caracterizaron las probetas mediante microscopía óptica y electrónica de barrido con microanálisis (EDS. La composición elemental del recubrimiento se determinó en un espectrómetro de emisión óptica con fuente de excitación (GDL. El estudio de la interfase reveló una perfecta adherencia entre el recubrimiento y el material base, sin defectos apreciables. La microestructura de las capas depositadas es dendrítica con un alto grado de refinamiento y una homogeneidad química a lo largo del cordón y con valores muy próximos a los del polvo de partida. En las zonas de solape entre cordones, se observó un crecimiento del grano debido al segundo tratamiento térmico recibido. La microdureza de las capas alcanza los 750 HV, valor considerablemente superior al del sustrato (200 HV. Asimismo, se obtuvo una mejora

  14. Biodegradable Piezoelectric Force Sensor.

    Curry, Eli J; Ke, Kai; Chorsi, Meysam T; Wrobel, Kinga S; Miller, Albert N; Patel, Avi; Kim, Insoo; Feng, Jianlin; Yue, Lixia; Wu, Qian; Kuo, Chia-Ling; Lo, Kevin W-H; Laurencin, Cato T; Ilies, Horea; Purohit, Prashant K; Nguyen, Thanh D

    2018-01-30

    Measuring vital physiological pressures is important for monitoring health status, preventing the buildup of dangerous internal forces in impaired organs, and enabling novel approaches of using mechanical stimulation for tissue regeneration. Pressure sensors are often required to be implanted and directly integrated with native soft biological systems. Therefore, the devices should be flexible and at the same time biodegradable to avoid invasive removal surgery that can damage directly interfaced tissues. Despite recent achievements in degradable electronic devices, there is still a tremendous need to develop a force sensor which only relies on safe medical materials and requires no complex fabrication process to provide accurate information on important biophysiological forces. Here, we present a strategy for material processing, electromechanical analysis, device fabrication, and assessment of a piezoelectric Poly-l-lactide (PLLA) polymer to create a biodegradable, biocompatible piezoelectric force sensor, which only employs medical materials used commonly in Food and Drug Administration-approved implants, for the monitoring of biological forces. We show the sensor can precisely measure pressures in a wide range of 0-18 kPa and sustain a reliable performance for a period of 4 d in an aqueous environment. We also demonstrate this PLLA piezoelectric sensor can be implanted inside the abdominal cavity of a mouse to monitor the pressure of diaphragmatic contraction. This piezoelectric sensor offers an appealing alternative to present biodegradable electronic devices for the monitoring of intraorgan pressures. The sensor can be integrated with tissues and organs, forming self-sensing bionic systems to enable many exciting applications in regenerative medicine, drug delivery, and medical devices.

  15. Engineering workstation: Sensor modeling

    Pavel, M; Sweet, B.

    1993-01-01

    The purpose of the engineering workstation is to provide an environment for rapid prototyping and evaluation of fusion and image processing algorithms. Ideally, the algorithms are designed to optimize the extraction of information that is useful to a pilot for all phases of flight operations. Successful design of effective fusion algorithms depends on the ability to characterize both the information available from the sensors and the information useful to a pilot. The workstation is comprised of subsystems for simulation of sensor-generated images, image processing, image enhancement, and fusion algorithms. As such, the workstation can be used to implement and evaluate both short-term solutions and long-term solutions. The short-term solutions are being developed to enhance a pilot's situational awareness by providing information in addition to his direct vision. The long term solutions are aimed at the development of complete synthetic vision systems. One of the important functions of the engineering workstation is to simulate the images that would be generated by the sensors. The simulation system is designed to use the graphics modeling and rendering capabilities of various workstations manufactured by Silicon Graphics Inc. The workstation simulates various aspects of the sensor-generated images arising from phenomenology of the sensors. In addition, the workstation can be used to simulate a variety of impairments due to mechanical limitations of the sensor placement and due to the motion of the airplane. Although the simulation is currently not performed in real-time, sequences of individual frames can be processed, stored, and recorded in a video format. In that way, it is possible to examine the appearance of different dynamic sensor-generated and fused images.

  16. A Novel Optical Sensor Platform Designed for Wireless Sensor Networks

    Yang, Shuo; Zhou, Bochao; Sun, Tong; Grattan, Kenneth T V

    2013-01-01

    This paper presents a novel design of an optical sensor platform, enabling effective integration of a number of optical fibre ('wired') sensors with wireless sensor networks (WSNs). In this work, a fibre Bragg grating-based temperature sensor with low power consumption is specially designed as a sensing module and integrated successfully into a WSN, making full use of the advantages arising from both the advanced optical sensor designs and the powerful network functionalities resident in WSNs. The platform is expected to make an important impact on many applications, where either the conventional optical sensor designs or WSNs alone cannot meet the requirements.

  17. Integration of LIDAR, optical remotely sensed, and ancillary data for forest monitoring and Grizzly bear habitat characterization / Integração de LIDAR, sensores remotos óticos e dados auxiliares para o monitoramento fl orestal e caracterização do habitat dos ursos Grizzly

    Michael A. Wulder

    2008-09-01

    Full Text Available Forest management and reporting information needs are becomingincreasingly complex in Canada. Inclusion of timber and non-timber considerations for both management and reporting has resulted inopportunities for integration of data from differing sources to provide the desired information. Canada’s forested land-base is over 400million hectares in size and fulfi lls important ecological and economic functions. In this communication we describe how remotely senseddata and other available spatial data layers capture different forestcharacteristics and conditions, and how these varying data sources may be combined to provide otherwise unavailable information. For instance, light detection and ranging (LIDAR confers information regardingvertical forest structure; high spatial resolution imagery captures (indetail the horizontal distribution and arrangement of vegetation andvegetation conditions; and, moderate spatial resolution imagery providesconsistent wide-area depictions of forest conditions. Furthermore, coarsespatial resolution imagery, with a high temporal density, can be blended with data of a higher spatial resolution to generate moderate spatialresolution data with a high temporal density. These remotely sensed datasources, when combined with existing spatial data layers such as forest inventory and digital terrain models, provide useful information thatmay be used to address, through modelling, questions regarding forest condition, structure, and change. In this communication, we discuss the importance of data integration and ultimately, information generation, inthe context of Grizzly bear habitat characterization. Grizzly bear habitat in western Canada is currently undergoing pressure from a combination of anthropogenic activities and a widespread outbreak of mountain pine beetle, resulting in a variety of information needs, including: detailed depictions of horizontal and vertical vegetation structure over large areasto support bark beetle susceptibility mapping and habitat modelling;moderate spatial resolution data to capture changes in infestation conditions over time to support change detection and wall-to-wallmapping; and, coarse spatial resolution data to provide increased temporaldetail enabling capture of within-year alterations to Grizzly habitat.

  18. Sensor array signal processing

    Naidu, Prabhakar S

    2009-01-01

    Chapter One: An Overview of Wavefields 1.1 Types of Wavefields and the Governing Equations 1.2 Wavefield in open space 1.3 Wavefield in bounded space 1.4 Stochastic wavefield 1.5 Multipath propagation 1.6 Propagation through random medium 1.7 ExercisesChapter Two: Sensor Array Systems 2.1 Uniform linear array (ULA) 2.2 Planar array 2.3 Distributed sensor array 2.4 Broadband sensor array 2.5 Source and sensor arrays 2.6 Multi-component sensor array2.7 ExercisesChapter Three: Frequency Wavenumber Processing 3.1 Digital filters in the w-k domain 3.2 Mapping of 1D into 2D filters 3.3 Multichannel Wiener filters 3.4 Wiener filters for ULA and UCA 3.5 Predictive noise cancellation 3.6 Exercises Chapter Four: Source Localization: Frequency Wavenumber Spectrum4.1 Frequency wavenumber spectrum 4.2 Beamformation 4.3 Capon's w-k spectrum 4.4 Maximum entropy w-k spectrum 4.5 Doppler-Azimuth Processing4.6 ExercisesChapter Five: Source Localization: Subspace Methods 5.1 Subspace methods (Narrowband) 5.2 Subspace methods (B...

  19. Sensor Characteristics Reference Guide

    Cree, Johnathan V.; Dansu, A.; Fuhr, P.; Lanzisera, Steven M.; McIntyre, T.; Muehleisen, Ralph T.; Starke, M.; Banerjee, Pranab; Kuruganti, T.; Castello, C.

    2013-04-01

    The Buildings Technologies Office (BTO), within the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), is initiating a new program in Sensor and Controls. The vision of this program is: • Buildings operating automatically and continuously at peak energy efficiency over their lifetimes and interoperating effectively with the electric power grid. • Buildings that are self-configuring, self-commissioning, self-learning, self-diagnosing, self-healing, and self-transacting to enable continuous peak performance. • Lower overall building operating costs and higher asset valuation. The overarching goal is to capture 30% energy savings by enhanced management of energy consuming assets and systems through development of cost-effective sensors and controls. One step in achieving this vision is the publication of this Sensor Characteristics Reference Guide. The purpose of the guide is to inform building owners and operators of the current status, capabilities, and limitations of sensor technologies. It is hoped that this guide will aid in the design and procurement process and result in successful implementation of building sensor and control systems. DOE will also use this guide to identify research priorities, develop future specifications for potential market adoption, and provide market clarity through unbiased information

  20. Water quality sensor

    Ishizuka, Keiko; Takahashi, Masanori; Watanabe, Atsushi; Ibe, Hidefumi.

    1994-01-01

    The sensor of the present invention can directly measure oxygen/hydrogen peroxide concentrations in reactor water under radiation irradiation condition, and it has a long life time. Namely, an oxygen sensor comprises electrodes attached on both sides of high temperature/radiation resistant ion conductive material in which ions are sufficiently diffused within a temperature range of from a room temperature to 300degC. It has a performance for measuring electromotive force caused by the difference of a partial pressure between a reference gas and a gas to be measured contained in the high temperature/radiation resistant material. A hydrogen peroxide sensor has the oxygen sensor described above, to which a filter for causing decomposition of hydrogen peroxide is attached. The sensor of the present invention can directly measure oxygen/hydrogen peroxide concentrations in a reactor water of a BWR type reactor under high temperature/radiation irradiation condition. Accordingly, accurate water quality environment in the reactor water can be recognized. As a result, determination of incore corrosion environment is established thereby enabling to attain reactor integrity, safety and long life. (I.S.)

  1. DESULFURACIÓN DE RELAVE MEDIANTE LA FLOTACIÓN DE SULFUROS DE HIERRO

    Luis Valderrama Campusano

    2015-12-01

    Full Text Available En Chile la minería se desarrolla principalmente en  la concentración de cobre, molibdeno, oro y plata, mediante el proceso de flotación. Este genera grandes tonelajes de relaves que contienen diversas minerales, principalmente pirita. Dado que estos minerales se depositan en los tranques, estos pueden generar aguas ácidas; se propone como alternativa la desulfuración de los súlfuros por flotación. En una primera parte se estudió la flotabilidad de la pirita en un tubo Hallimond, utilizando como colector AP 404. Luego se realizaron pruebas de flotación a nivel de laboratorio en celda Denver D-12, utilizando pulpa de relave fresco de la etapa rougher de un circuito de flotación de cobre,  determinando el pH óptimo y dosificación de colector y espumantes. Pruebas de cinética de flotación permitieron determinar el tiempo óptimo de flotación tanto para la etapa rougher como  para la etapa scavenger. Se concluye que la flotación de los relaves sea una técnicamente factible su desulfuración,  obteniendo relaves que contienen  0,08% de pirita.

  2. Interoperabilidad en Sistemas Domóticos Mediante Pasarela Infrarrojos-ZigBee

    Gonzalo B. Asencio

    2011-10-01

    Full Text Available Resumen: La domótica consiste en la aplicación de técnicas provenientes de la automática industrial al hogar con objeto de ofrecer servicios que aporten, entre otras cosas, confort, seguridad y eficiencia energética a los usuarios. Hasta el momento la penetración de dichas técnicas en los hogares ha sido reducida. Una de las razones fundamentales de esta lenta transposición de técnicas de control al hogar es la dificultad de integración entre los diferentes sistemas presentes en el hogar. En este artículo se presenta un desarrollo encaminado a mejorar la integración de los sistemas domóticos con aquellos dispositivos que sean controlables mediante infrarrojos. En concreto se ha desarrollado una pasarela inalámbrica que permite a una red domótica el envío de tramas de infrarrojos. De esta manera se posibilita un despliegue rápido y económico de los nodos que sean necesarios para integrar dispositivos tales como los sistemas de aire acondicionado en una red domótica. Copyright c 2011 CEA. Publicado por Elsevier España, S.L. Todos los derechos reservados. Palabras clave: Control a través de redes de comunicación, Impacto social de la automática

  3. Galactosemia: Diagnóstico precoz mediante estudio enzimático

    Úrsula Carrillo Estrada

    2003-09-01

    Full Text Available Se presentan los resultados obtenidos del estudio realizado a un paciente masculino de 45 días de nacido, cuyo motivo de ingreso fue pérdida de peso, decaimiento, retraso psicomotor y crisis de hipoglucemia. Los síntomas comenzaron en el período neonatal y coincidieron con la introducción de la lactancia materna. En estudios realizados se constató en la orina la presencia de lactosa y galactosa. Se confirma el diagnóstico por estudio enzimático. La evolución clínica ha sido satisfactoria. El tratamiento dietético que excluía a los alimentos que contienen galactosa y lactosa fue de mucha importancia. Es el primer caso diagnosticado en Cuba mediante estudio enzimático.This paper presents the results of a study performed on a 45-day old male patient who was admitted to the hospital for weight loss, tiredness, psychomotor retardation and hypoglicemic crisis. The symptoms had begun in the neonatal period and had coincided with the introduction of breast feeding. The studies detected lactose and galactose in urine. The enzymatic study confirmed the diagnosis. The clinical recovery was satisfactory. The dietary treatment that excluded foods containing galactose and lactose was important and successful. He is the first case diagnosed on enzymatic study in Cuba.

  4. Prácticas educativas. Desarrollo de la lectura mediante estrategias integradoras

    Maira Solé

    2005-01-01

    Full Text Available La lectura y la escritura son procesos que cada día ameritan nuevos cambios y transformaciones. La propuesta de un Proyecto Pedagógico Integrador, (Fraca 2003 desarrollado con éxito en algunas instituciones venezolanas, se perfila como una alternativa significativa para el desarrollo de estos elementos. La idea o núcleo central es la integración de las diferentes asignaturas curriculares y lograr una globalización partiendo de sus objetivos y contenidos programáticos. El eje pedagógico integrador le permite al docente, evidenciar con mayor prontitud los resultados mediante actividades prácticas de lectura y escritura. Así mismo combina elementos claves del aprendizaje ausbeliano: información previa, información nueva y construcción de la información definitiva o integrada. La puesta en ejecución de las estrategias integradoras, en esta ocasión por maestros en formación (UNEG, a diferentes niños de escuelas del Estado Bolívar (Venezuela, certificando cómo la lectura y la escritura pueden tener un espacio ideal y significativo en la instrucción actual. Solo se necesita la intención, creatividad, dinamismo e ingenio.

  5. BIORREMEDIACIÓN DE UN SUELO CON DIESEL MEDIANTE EL USO DE MICROORGANISMOS AUTÓCTONOS

    ARRIETA RAMÍREZ OLGA MARIA

    2012-07-01

    Full Text Available En este estudio, se aisló y caracterizó bioquímica y molecularmente un consorcio bacteriano capaz de degradar los diferentes hidrocarburos presentes en un combustible diesel,conformado por los siguientes géneros: Enterobacter sp, Bacillus sp, Staphylococcus aureus, Sanguibacter soli, Arthrobacter sp y Flavobacterium sp, a partir de un suelo contaminado con diesel a escala de laboratorio, y tratado mediante 2 tecnologías de biorremediación: atenuación natural y bioestimulación. Se definió como parámetro de control la concentración de Hidrocarburos Totales del Petróleo (HTP y para el cual, se obtuvo una reducción en la concentración en un periodo de 4 meses de 36,86% para atenuación natural y 50,99% para bioestimulación. La medición de la eficiencia de remoción de hidrocarburos se cuantificó por cromatografía de gases acoplada a masas (GC-MS.

  6. Análisis de una columna desbutanizadora mediante técnica de perfilaje gamma

    Óscar Chaverri

    2007-05-01

    Full Text Available En este trabajo se reportan los resultados de un estudio, realizado mediante la técnica no destructiva de perfilaje por rayos gamma, de una columna desbutanizadora en una refinería de petróleo. Dicho estudio tuvo entre sus objetivos el de resaltar los beneficios que se derivan de la aplicación pacifica de la energía nuclear, en la determinación de problemas que afectan la eficiencia y seguridad de procesos industriales. En este caso particular, se inspeccionó parte de una torre para la destilación de petróleo, y se determinó la presencia de algunas pequeñas anomalías, aunque el funcionamiento de la columna era correcto y seguro. Cabe recalcar que,por tratarse de una técnica no destructiva y con la posibilidad de medir a través de la pared de la columna, el ensayo fue realizado sin necesidad de abrir la torre misma o de introducir personal técnico en su interior.

  7. Medida de similaridad entre imágenes de marcas de ganado mediante distribuciones de forma

    Germán Sánchez Torres

    2014-12-01

    Full Text Available Este documento reporta los resultados de una investigación orientada hacia el diseño de un método de tratamiento de imágenes digitales para la automatización de los procesos de registro y control de marcas de ganado requeridas por las regulaciones del sector ganadero en Colombia. El método permite automatizar los procesos de búsqueda y de comparación necesarios para garantizar la unicidad de las marcas dentro de un sistema asistido por computadora. Se inicia con la generación de un histograma estimado de la geometría de la marca, lo que permite comparar y detectar similitudes entre las figuras previamente almacenadas, mediante una métrica de similitud basada en la distancia de Minkowski. Los resultados obtenidos indican que el método es adecuado para realizar un proceso de discriminación de dichas imágenes, reducir las ambigüedades y garantizar la unicidad de los registros. Los resultados obtenidos y un análisis de su aplicación son reportados.

  8. Vigilancia del riesgo de ocurrencia de incendios forestales mediante estaciones meteorológicas de superficie

    I. M. Domínguez-Hurtado

    2008-01-01

    Full Text Available Para la estimación del riesgo de ocurrencia de incendios forestales se emplean diferentes variantes a nivel mundial, en este trabajo se propone un sistema de vigilancia para la detección del riesgo de ocurrencia de incendios forestales a partir de la información procedente de estaciones meteorológicas de superficie, debido básicamente a la carencia de salidas operativas diarias que evaluarán las condiciones de riesgo de fuegos a nivel nacional. Se emplearon los índices de Nesterov modificado y Monte Alegre, los cuales se estimaron a partir de los datos procedentes de las 68 estaciones meteorológicas de Cuba. A partir de dicha información se obtiene la salida mapificada diaria de cada uno de ellos, mediante la utilización de la técnica de interpolación bicubic spline. Se obtuvo un sistema operativo totalmente automatizado para la evaluación de las condiciones de riesgo de ocurrencia de incendios para Cuba, el cual brinda la posibilidad de completar y perfeccionar el sistema de vigilancia de fuegos, basado en la reducción de la escala temporal y el tratamiento de la información.

  9. LA EXPERIENCIA DE UNA CLASE INTEGRADA MEDIANTE RESOLUCIÓN DE PROBLEMAS

    Fernanda Ortiz Rivera

    2014-05-01

    Full Text Available Es una experiencia en la Institución educativa Tomas Cipriano de Mosquera con estudiantes del ciclo noveno en una clase de ciencias naturales sobre el sentido de la audición, teniendo en cuenta integrar la biología  y la física  mediante el tema del órgano de la audición con el tema del sonido, en el marco de un enfoque didáctico por resolución de problemas, en el cual la pregunta problema central que se generó a los estudiantes, producto de consultar sus intereses, fue: ¿por qué se produce la sordera? Esta pregunta se realizó al comienzo y al final de la clase, mostrando de esta manera al final buenos resultados de aprendizaje en los estudiantes, ya que fueron construyendo  nociones, ideas y conceptos necesarios sobre el sonido con sus propiedades y cualidades; y la audición con las funciones y partes del oído, para poder resolver la pregunta central gracias a una secuencia didáctica de clase que construimos cuidadosamente en el que incluía experimentos, lecturas, explicaciones, materiales didácticos, entre otros, siendo así una clase muy activa y participativa, ya que el estudiante siempre fue el que llevo el papel principal de la clase.

  10. Autonomous sensor manager agents (ASMA)

    Osadciw, Lisa A.

    2004-04-01

    Autonomous sensor manager agents are presented as an algorithm to perform sensor management within a multisensor fusion network. The design of the hybrid ant system/particle swarm agents is described in detail with some insight into their performance. Although the algorithm is designed for the general sensor management problem, a simulation example involving 2 radar systems is presented. Algorithmic parameters are determined by the size of the region covered by the sensor network, the number of sensors, and the number of parameters to be selected. With straight forward modifications, this algorithm can be adapted for most sensor management problems.

  11. Introduction to optical fiber sensors

    Moukdad, S.

    1991-01-01

    Optical fiber sensors have many advantages over other types of sensors, for example: Low weight, immunity from EMI, electrical isolation, chemical passivity, and high sensitivity. In this seminar, a brief explanation of the optical fiber sensors, their use, and their advantages will be given. After, a description of the main optical fiber sensor components will be presented. Principles of some kinds of optical fiber sensors will be presented, and the principle of the fiber-optic rotation sensor and its realization will be discussed in some details, as well as its main applications. (author). 5 refs, 8 figs, 2 tabs

  12. Procedimiento de estabilización de mercurio líquido mediante cemento polimérico de azufre, vía sulfuro de mercurio.

    López-Delgado, Aurora; López Gómez, Félix Antonio; Alguacil, Francisco José; Alonso Gámez, Manuel

    2011-01-01

    Procedimiento de estabilización de mercurio líquido mediante cemento polimérico de azufre, vía sulfuro de mercurio. Procedimiento para la estabilización de mercurio líquido mediante la obtención de cementos poliméricos de azufre que comprende: (a) transformación del mercurio líquido en sulfuro de mercurio (metacinabrio) mediante reacción química, en condiciones estequiométricas, entre el mercurio y el azufre elemental; y (b) obtención de cemento polimérico de azufre me...

  13. Diseño mediante elementos finitos de componentes estructurales de un cuadricóptero para impresión 3D

    PARDO APARISI, IVÁN

    2016-01-01

    El trabajo tiene como objetivo diseñar componentes estructurales, mediante el método de elementos finitos, que serán utilizados en un dron de cuatro rotores (cuadricóptero). Una característica particular de este proyecto es que los componentes estructurales a diseñar serán fabricados mediante impresión 3D. Pardo Aparisi, I. (2016). Diseño mediante elementos finitos de componentes estructurales de un cuadricóptero para impresión 3D. http://hdl.handle.net/10251/75994. TFGM

  14. Modular chemiresistive sensor

    Alam, Maksudul M.; Sampathkumaran, Uma

    2018-02-20

    The present invention relates to a modular chemiresistive sensor. In particular, a modular chemiresistive sensor for hypergolic fuel and oxidizer leak detection, carbon dioxide monitoring and detection of disease biomarkers. The sensor preferably has two gold or platinum electrodes mounted on a silicon substrate where the electrodes are connected to a power source and are separated by a gap of 0.5 to 4.0 .mu.M. A polymer nanowire or carbon nanotube spans the gap between the electrodes and connects the electrodes electrically. The electrodes are further connected to a circuit board having a processor and data storage, where the processor can measure current and voltage values between the electrodes and compare the current and voltage values with current and voltage values stored in the data storage and assigned to particular concentrations of a pre-determined substance such as those listed above or a variety of other substances.

  15. Wireless sensor communications and internet connectivity for sensor networks

    Dunbar, M. [Crossbow Technology, Inc., San Jose, CA (United States)

    2001-07-01

    A wireless sensor network architecture is an integrated hardware/software solution that has the potential to change the way sensors are used in a virtually unlimited range of industries and applications. By leveraging Bluetooth wireless technology for low-cost, short-range radio links, wireless sensor networks such as CrossNet{sup TM} enable users to create wireless sensor networks. These wireless networks can link dozens or hundreds of sensors of disparate types and brands with data acquisition/analysis systems, such as handheld devices, internet-enabled laptop or desktop PCs. The overwhelming majority of sensor applications are hard-wired at present, and since wiring is often the most time-consuming, tedious, trouble-prone and expensive aspect of sensor applications, users in many fields will find compelling reasons to adopt the wireless sensor network solution. (orig.)

  16. Mechanoluminescent Contact Type Sensor

    A. K. Yefremov

    2017-01-01

    Full Text Available Mechanoluminescent sensing elements convert mechanical stress into optical radiation. Advantages of such sensors are the ability to generate an optical signal, solid-state, simple structure, and resistance to electromagnetic interference. Mechanoluminescent sensor implementations can possess the concentrated and distributed sensitivity, thereby allowing us to detect the field of mechanical stresses distributed across the area and in volume. Most modern semiconductor photo-detectors can detect mechanoluminescent radiation, so there are no difficulties to provide its detection when designing the mechanoluminescent sensing devices. Mechanoluminescent substances have especial sensitivity to shock loads, and this effect can be used to create a fuse the structure of which includes a target contact type sensor with a photosensitive actuator. The paper briefly describes the theoretical basics of mechanoluminiscence: a light signal emerges from the interaction of crystalline phosphor luminescence centers with electrically charged dislocations, moving due to the deformation of the crystal. A mathematical model of the mechanoluminescent conversion is represented as a functional interaction between parameters of the mechanical shock excitation and the sensor light emission. Examples of computing the optical mechanoluminescent output signal depending on the duration and peak level of impulse load are given. It is shown that the luminous flux, generated by mechanoluminescent sensing element when there is an ammunition-target collision causes the current emerging in photo-detector (photodiode that is sufficient for a typical actuator of the fuse train to operate. The potential possibility to create a contact target type sensor based on the light-sensitive mechanoluminescent sensor was proved by the calculation and simulation results.

  17. Diseño y prototipaje del álabe para un miniaerogenerador mediante impresión 3D

    Roy Mota, Andrea

    2017-01-01

    El objetivo de este proyecto consiste en el diseño de una maqueta de álabe para un mini aerogenerador y su posterior fabricación con PLA mediante la tecnología de impresión 3D no industrial. Para conseguirlo se creó una hoja de cálculo que torna la superficie del ala; se analizó la impresora 3D y se diseñó la estructura interna del aspa para dotarlo de resistencia según sus límites de impresión de la impresora mediante el programa Siemens Unigraphics NX10; se simularon los esfuerzos y a parti...

  18. Extracción de ADN de Trypanosoma cruzi mediante tratamiento con bromuro de hexadecil-trimetil-amonio

    Marcela Escalante

    1997-06-01

    Full Text Available En el presente trabajo se describe un método rápido, sencillo y eficaz para la obtención de ADN genómico de Trypanosoma cruzi, libre de impurezas y fácil de manipular. Dicho procedimiento se basa en la lisis del parásito con SDS y remoción de proteínas mediante la digestión con proteinasa K, seguida de la precipitación selectiva de carbohidratos y proteínas residuales con bromuro de hexadecil-trimetil-amonio (CTAB. Finalmente, el ADN se extrae con cloroformo: alcohol isoamílico y se recupera de la fase acuosa mediante precipitación con isopropanol.

  19. Control mediante modos deslizantes en tiempo discreto para el seguimiento de trayectorias de un robot móvil1

    P.A. Niño-Suárez

    2007-10-01

    Full Text Available Resumen: En este trabajo se presenta una estrategia de control en tiempo discreto para el seguimiento de trayectorias de un robot móvil tipo (2,0 controlado remotamente. La estrategia de control se desarrolló mediante un enfoque de modos deslizantes, considerando el modelo discreto exacto del vehículo en el cual se incluyen los efectos del retardo de transporte causado por la propagación de las señales sobre una red de comunicación. El esquema de control garantiza el seguimiento de trayectorias predeterminadas obteniéndose convergencia asintótica de los errores de seguimiento. La estrategia propuesta es evaluada mediante una serie de resultados por simulación. Palabras clave: Robot móvil, retardos de transporte, control en tiempo discreto, modos deslizantes

  20. Mining robotics sensors

    Green, JJ

    2011-07-01

    Full Text Available International Conference of CAD/CAM, Robotics & Factories of the Future (CARs&FOF 2011) 26-28 July 2-11, Kuala Lumpur, Malaysia Mining Robotics Sensors Perception Sensors on a Mine Safety Platform Green JJ1, Hlophe K2, Dickens J3, Teleka R4, Mathew Price5...-28 July 2-11, Kuala Lumpur, Malaysia visualization in confined, lightless environments, and thermography for assessing the safety and stability of hanging walls. Over the last decade approximately 200 miners have lost their lives per year in South...

  1. Magnetic nanocomposite sensor

    Alfadhel, Ahmed

    2016-05-06

    A magnetic nanocomposite device is described herein for a wide range of sensing applications. The device utilizes the permanent magnetic behavior of the nanowires to allow operation without the application of an additional magnetic field to magnetize the nanowires, which simplifies miniaturization and integration into microsystems. In5 addition, the nanocomposite benefits from the high elasticity and easy patterning of the polymer-based material, leading to a corrosion-resistant, flexible material that can be used to realize extreme sensitivity. In combination with magnetic sensor elements patterned underneath the nanocomposite, the nanocomposite device realizes highly sensitive and power efficient flexible artificial cilia sensors for flow measurement or tactile sensing.

  2. Wireless rechargeable sensor networks

    Yang, Yuanyuan

    2015-01-01

    This SpringerBrief provides a concise guide to applying wireless energy transfer techniques in traditional battery-powered sensor networks. It examines the benefits and challenges of wireless power including efficiency and reliability. The authors build a wireless rechargeable sensor networks from scratch and aim to provide perpetual network operation. Chapters cover a wide range of topics from the collection of energy information and recharge scheduling to joint design with typical sensing applications such as data gathering. Problems are approached using a natural combination of probability

  3. Self Calibrating Interferometric Sensor

    Sørensen, Henrik Schiøtt

    mask. The fabricated micro structures have been electroplated for later injection molding, showing the potential of the MIBD sensor to be mass produced with high reproducibility and sensitivity. In part three MIBD experiments on vital biological systems are described. Label–free binding studies of bio......This thesis deals with the development of an optical sensor based on micro interferometric backscatter detection (MIBD). A price effective, highly sensitive and ready for mass production platform is the goal of this project. The thesis covers three areas. The first part of the thesis deals...

  4. Heme Sensor Proteins*

    Girvan, Hazel M.; Munro, Andrew W.

    2013-01-01

    Heme is a prosthetic group best known for roles in oxygen transport, oxidative catalysis, and respiratory electron transport. Recent years have seen the roles of heme extended to sensors of gases such as O2 and NO and cell redox state, and as mediators of cellular responses to changes in intracellular levels of these gases. The importance of heme is further evident from identification of proteins that bind heme reversibly, using it as a signal, e.g. to regulate gene expression in circadian rhythm pathways and control heme synthesis itself. In this minireview, we explore the current knowledge of the diverse roles of heme sensor proteins. PMID:23539616

  5. Novel nanostructured oxygen sensor

    Boardman, Alan James

    New government regulations and industry requirements for medical oxygen sensors require the development of alternate materials and process optimization of primary sensor components. Current oxygen sensors are not compliant with the Restriction of Hazardous Substances (RoHS) Directive. This work focused on two areas. First, was finding suitable readily available materials for the sensor anodes. Second was optimizing the processing of the sensor cathode membrane for reduced delamination. Oxygen sensors were made using tin (Sn) and bismuth (Bi) electrodes, potassium hydroxide (KOH) and acetic acid (CH3COOH) electrolytes with platinum (Pt) and gold (Au) reference electrodes. Bi electrodes were fabricated by casting and pressing processes. Electrochemical characterization of the Sn and Bi electrodes was performed by Cyclic Voltammetry (CV), Electrochemical Impedance Spectroscopy (EIS) and sensing characterization per BSEN ISO 21647:2009 at various oxygen percentages, 0%, 20.9% and 100% oxygen levels with an automated test apparatus. The Sn anode with both electrolyte solutions showed good oxygen sensing properties and performance in a sensor. This system shows promise for replacement of Pb electrodes as required by the RoHS Directive. The Bi anode with Au cathode in both KOH and CH3COOH electrolytes showed acceptable performance and oxygen sensing properties. The Bi anodes fabricated by separate manufacturing methods demonstrated effectiveness for use in medical oxygen sensors. Gold thin films were prepared by magnetron sputtering on Flouroethylene Polymer (FEP) films. The FEP substrate temperature ranged from -77°C to 50°C. X-Ray Diffraction (XRD) and 4-point resistivity characterized the effects of substrate temperature to Au thin film particle size. XRD peak broadening and resistivity measurements showed a strong correlation of particle size to FEP substrate temperature. Particle size at 50°C was 594A and the -77°C particle size was 2.4 x 103A. Substrate

  6. Sensor Webs to Constellations

    Cole, M.

    2017-12-01

    Advanced technology plays a key role in enabling future Earth-observing missions needed for global monitoring and climate research. Rapid progress over the past decade and anticipated for the coming decades have diminished the size of some satellites while increasing the amount of data and required pace of integration and analysis. Sensor web developments provide correlations to constellations of smallsats. Reviewing current advances in sensor webs and requirements for constellations will improve planning, operations, and data management for future architectures of multiple satellites with a common mission goal.

  7. Protective head of sensors

    Liska, K.; Anton, P.

    1987-01-01

    The discovery concerns the protective heads of diagnostic assemblies of nuclear power plants for conductors of the sensors from the fuel and control parts of the said assemblies. A detailed description is presented of the design of the protective head which, as compared with the previous design, allows quick and simple assembly with reduced risk of damaging the sensors. The protective head may be used for diagnostic assemblies both in power and in research reactors and it will be used for WWER reactor assemblies. (A.K.). 3 figs

  8. SENSOR.awi.de: Management of heterogeneous platforms and sensors

    Koppe, Roland; Gerchow, Peter; Macario, Ana; Haas, Antonie; Schäfer-Neth, Christian; Rehmcke, Steven; Walter, Andreas; Düde, Tobias; Weidinger, Philipp; Schäfer, Angela; Pfeiffenberger, Hans

    2018-01-01

    SENSOR.awi.de is a component of our data flow framework designed to enable a semi-automated flow of sensor observations to archives (acronym O2A). The dramatic increase in the number and type of platforms and respective sensors operated by Alfred Wegener Institute along with complex project-driven requirements in terms of satellite communication, sensor monitoring, quality control and validation, processing pipelines, visualization, and archival under FAIR principles, led us to build a g...

  9. Proyectar con la naturaleza mediante la Metodología de los Estudios de Impacto Ambiental en ordenaciones residenciales

    Higueras García, Esther

    2013-01-01

    Proyectar con la naturaleza mediante la Metodología de los Estudios de Impacto Ambiental en ordenaciones residenciales .- Procedimiento de acción en la planificación ambiental .- Las técnicas de agregación de impactos .- Las afecciones de los planes de ordenación sobre el territorio. .- Las medidas preventivas y correctoras de planes .- Evaluación critica de los estudios de impacto ambiental

  10. Superficie específica de una bentonita mediante la adsorción de azul de metileno

    Jorge Alejo Pinzón Bello

    2010-07-01

    Full Text Available Se estudió la determinación de la superficie específica de una bentonita colombiana, procedente del Valle del Cauca, mediante la adsorción de azul de metileno, a 298 K. Este método se comparó con el de la adsorción de nitrógeno a 77 K.

  11. Simulación del perfil tensión-corriente para paneles solares mediante convertidor CC-CC reductor

    Muñoz Palaguachi, Henry Patricio; Patiño Guiracocha, Claudio Vinicio

    2017-01-01

    El desarrollo de este proyecto tiene como objetivo la reconstrucción del perfil tensión-corriente para paneles solares ante diferentes condiciones de funcionamiento al variar la temperatura e irradiancia. Este perfil se logra con el control de un convertidor reductor de tipo conmutado mediante controladores de corriente y tensión. In this work the emulation of voltage-current profiles for photovoltaic panels is developed for different operating conditions, specifically for variations in ir...

  12. Control y prevención de aludes mediante tecnologia dron

    Olive Roig, Bernat; Casanovas Crespo, Maria

    2018-01-01

    The proposal of control and prevention of avalanches using drone technology, arises with the idea of overcoming the challenges and the existing deficiencies, which make difficult the control and monitoring of snow avalanches, and that suppose a high risk for the safety of the affected areas. This purpose has been realized through a control system, formed by beacons equipped with ultrasonic and temperature sensors, which communicate with a drone that facilitates the information obtained on the c...

  13. Uso de Diferentes Sensores de Satélite na Discriminação de Alvos Naturais

    Gustavo Ferreira de Souza

    2016-01-01

    Full Text Available As particularidades nos instrumentos de sensoriamento remoto, mesmo quando possuem características semelhantes, torna as imagens geradas por estes, diferentes entre si. Visando isto, o objetivo do trabalho foi analisar a aplicabilidade e os limites de detecção na identificação de alvos naturais em diferentes imagens de satélites. A área de estudo está localizada no Estado de São Paulo dentro do Município de Onda Verde, os alvos naturais foram selecionados a partir de análises realizadas nas imagens e visita desses pontos em campo. Foram escolhidas áreas que apresentaram bom contraste com o entorno e fácil localização nas imagens de satélite. Para o processamento digital de imagem foi utilizado o software livre gvSIG. Neste estudo foram empregados dados de satélites de média resolução espacial como Landsat-5, CBERS-2B e IRS-P6, disponíveis na base de dados de domínio público do INPE (Instituto Nacional de Pesquisas Espaciais e imagens de alta resolução espacial dos satélites RapidEye e WorldView-2. Nos sensores de média resolução espacial, as menores resoluções espaciais dos sensores TM e LISS-3, não impediram a visualização dos alvos espectrais analisados, visto que, no CCD que possui uma maior resolução espacial, não foi possível a identificação dos alvos escolhidos. As imagens de alta resolução espacial RapidEye e WorldView apresentaram grande riqueza de detalhamento para a cobertura do solo, a isto atrela-se a alta resolução radiométrica desses satélites.

  14. Sensor Fusion-based Event Detection in Wireless Sensor Networks

    Bahrepour, M.; Meratnia, Nirvana; Havinga, Paul J.M.

    2009-01-01

    Recently, Wireless Sensor Networks (WSN) community has witnessed an application focus shift. Although, monitoring was the initial application of wireless sensor networks, in-network data processing and (near) real-time actuation capability have made wireless sensor networks suitable candidate for

  15. Semantic interoperability in sensor applications - making sense of sensor data

    Brandt, Paul; Basten, Twan; Stuijk, Sander; Bui, Vinh; de Clercq, Paul; Ferreira Pires, Luis; van Sinderen, Marten J.

    Much effort has been spent on the optimization of sensor networks, mainly concerning their performance and power efficiency. Furthermore, open communication protocols for the exchange of sensor data have been developed and widely adopted, making sensor data widely available for software

  16. Uso do sensoriamento remoto para estudar a influência de alterações ambientais na distribuição da malária na Amazônia brasileira Use of remote sensing to study the influence of environmental changes on malaria distribution in the Brazilian Amazon

    Cíntia Honório Vasconcelos

    2006-03-01

    Full Text Available A construção da hidroelétrica de Tucuruí, no sudeste do Estado do Pará, Brasil, em 1981, impôs grandes mudanças ambientais, desmatamentos e migração para a região. O objetivo deste trabalho é verificar a influência destas mudanças na ocorrência da malária no Município de Jacundá, Pará, Brasil, utilizando-se técnicas de sensoriamento remoto e sistemas de informações geográficas. Os parâmetros utilizados para a construção dos mapas foram: distância das estradas, classe agrossilvopastoril, distância de coleções hídricas (rios, igarapés e do reservatório e da área urbana do município. Neste estudo, verificou-se o caráter epidêmico da malária a partir da construção da barragem de Tucuruí. Sugere-se que o padrão sazonal da incidência está relacionado com o período de maior estabilidade das margens do reservatório e ocorrência de áreas alagadas, além de maior exposição de trabalhadores na época de colheita na região. Foi observado que a distribuição dos casos está relacionada com as formas de uso e ocupação da terra, principalmente em áreas de maior influência das estradas, locais onde se concentra grande parte da população.Construction of the Tucuruí hydroelectric dam in Southeast Pará State, Brazil, in 1981, caused enormous environmental changes, deforestation, and human migration to the region. This study focuses on the influence of these changes and the appearance of malaria in the municipality of Jacundá, Pará, using remote sensing and geographic information systems. The variables used to construct maps were distances from roads, farming areas, rivers, the dam, streams, and the urban area. This study confirmed the elevation of malaria to the epidemic level since the construction of the Tucuruí dam. The study suggests that a seasonal pattern of malaria incidence is associated with the flooding season and exposure of workers during harvest. Malaria cases were related to the form of

  17. Gait Analysis Using Wearable Sensors

    Tao, Weijun; Liu, Tao; Zheng, Rencheng; Feng, Hutian

    2012-01-01

    Gait analysis using wearable sensors is an inexpensive, convenient, and efficient manner of providing useful information for multiple health-related applications. As a clinical tool applied in the rehabilitation and diagnosis of medical conditions and sport activities, gait analysis using wearable sensors shows great prospects. The current paper reviews available wearable sensors and ambulatory gait analysis methods based on the various wearable sensors. After an introduction of the gait phases, the principles and features of wearable sensors used in gait analysis are provided. The gait analysis methods based on wearable sensors is divided into gait kinematics, gait kinetics, and electromyography. Studies on the current methods are reviewed, and applications in sports, rehabilitation, and clinical diagnosis are summarized separately. With the development of sensor technology and the analysis method, gait analysis using wearable sensors is expected to play an increasingly important role in clinical applications. PMID:22438763

  18. Bragg gratings: Optical microchip sensors

    Watts, Sam

    2010-07-01

    A direct UV writing technique that can create multiple Bragg gratings and waveguides in a planar silica-on-silicon chip is enabling sensing applications ranging from individual disposable sensors for biotechnology through to multiplexed sensor networks in pharmaceutical manufacturing.

  19. Sensor Validation using Bayesian Networks

    National Aeronautics and Space Administration — One of NASA’s key mission requirements is robust state estimation. Sensing, using a wide range of sensors and sensor fusion approaches, plays a central role in...

  20. Electric current sensors: a review

    Ripka, Pavel

    2010-01-01

    The review makes a brief overview of traditional methods of measurement of electric current and shows in more detail relatively new types of current sensors. These include Hall sensors with field concentrators, AMR current sensors, magneto-optical and superconducting current sensors. The influence of the magnetic core properties on the error of the current transformer shows why nanocrystalline materials are so advantageous for this application. Built-in CMOS current sensors are important tools for monitoring the health of integrated circuits. Of special industrial value are current clamps which can be installed without breaking the measured conductor. Parameters of current sensors are also discussed, including geometrical selectivity. This parameter specific for current sensors means the ability to suppress the influence of currents external to the sensor (including the position of the return conductor) and also suppress the influence on the position of the measured conductor with respect to the current. (topical review)

  1. Gait Analysis Using Wearable Sensors

    Hutian Feng

    2012-02-01

    Full Text Available Gait analysis using wearable sensors is an inexpensive, convenient, and efficient manner of providing useful information for multiple health-related applications. As a clinical tool applied in the rehabilitation and diagnosis of medical conditions and sport activities, gait analysis using wearable sensors shows great prospects. The current paper reviews available wearable sensors and ambulatory gait analysis methods based on the various wearable sensors. After an introduction of the gait phases, the principles and features of wearable sensors used in gait analysis are provided. The gait analysis methods based on wearable sensors is divided into gait kinematics, gait kinetics, and electromyography. Studies on the current methods are reviewed, and applications in sports, rehabilitation, and clinical diagnosis are summarized separately. With the development of sensor technology and the analysis method, gait analysis using wearable sensors is expected to play an increasingly important role in clinical applications.

  2. Polymer laser bio-sensors

    Kristensen, Anders; Vannahme, Christoph; Hermannsson, Pétur Gordon

    2014-01-01

    Organic dye based distributed feed-back lasers, featuring narrow linewidth and thus high quality spectral resolution, are used as highly sensitive refractive index sensors. The design, fabrication and application of the laser intra-cavity sensors are discussed....

  3. Micromecanizado de materiales cerámicos mediante láser de femtosegundo

    Moreno, P.

    2005-02-01

    Full Text Available In this work, we present the application of ultrashort and intense laser pulses (110 fs @ 1 kHz; up to 1.1 mJ/pulse to the micromachining of ceramics, specifically RubalitTM708S, a material based on alumina and widely used as a substrate in microelectronics. The mechanism for removing material is the so called direct ablation. It differs from thermal ablation of conventional lasers in the practically total absence of thermal effects which produces a remarkable increase of quality and precision of the machining. By means of an optical diffraction-based technique we find out the energy density threshold to work in the direct ablation regime. Adjusting the energy per pulse as well as the number of pulses, we are able to drill holes of the desired diameter and depth. In addition, processing is developed in air. We also demonstrate that high quality fs-laser micromachining is suitable for every ceramic, whatever the mechanical properties, with similar working parameters. In order to show this point, we have also processed sintered SiN, a material of wide-ranging interest in industry.

    En este trabajo presentamos la aplicación de pulsos láser ultracortos (110 fs @ 1 kHz; hasta 1.1 mJ/pulso al micromecanizado de materiales cerámicos, en concreto RubalitTM708S, un material compuesto principalmente de alúmina y empleado en la industria microelectrónica. El mecanismo de eliminación de material es la ablación directa, que difiere de la ablación térmica empleada por los láseres convencionales en la prácticamente total ausencia de efectos térmicos, lo que redunda en un aumento significativo de la precisión y calidad del mecanizado. Mediante técnicas basadas en la difracción óptica determinamos el umbral de energía necesario para que tenga lugar el proceso de ablación directa. Con ese dato y regulando la energía por pulso y el número de pulsos somos capaces de producir mecanizados del diámetro y profundidad deseados. Además, el

  4. Efecto de la adición de Ag en Bi-2212 texturado mediante laser

    Mora, M.

    2005-08-01

    Full Text Available The addition of Ag into Bi-2212 compounds has demonstrated to be a suitable method to improve both, the thermal and mechanical properties as well as the electrical ones. The final properties have been found to be in strong dependence of Ag content and the processing technique. In the present work the influence of Ag addition on Bi-2212 bulk materials grown from the melt, using a laser floating zone melting technique, has been studied. Samples with different Ag contents (0 to 40 wt.% were prepared for this work. The Bi-2212 + x wt.% Ag powders have been prepared by a sol-gel method via nitrates to assure total cation solution, small particle size and good homogeneity in the mixture. Cylindrical precursors, fabricated from these powders, were used as feed in a LFZ melting installation to obtain textured Bi-2212/Ag composites. The effect of the Ag addition on the microstructure is analysed as a function of Ag content. The changes on the microstructure are also correlated with the mechanical and superconducting properties.

    La incorporación de Ag en los compuestos de Bi-2212 ha demostrado ser un método adecuado para mejorar tanto las propiedades mecánicas, térmicas como eléctricas de estos materiales. Las propiedades finales dependen fuertemente de la cantidad de Ag añadida al sistema pero también del tipo de procesado que sufre. En el presente trabajo se realiza un estudio del efecto de la adición de Ag en materiales masivos Bi-2212 texturados mediante fusión zonal inducida por láser, con el objetivo de comprender el efecto de la adición de Ag en sistemas Bi-2212 que pasan totalmente por un fundido. Para ello se preparon muestras con diferentes contenidos en Ag (hasta el 40% en peso. Debido a la inmiscibilidad en estado sólido de la Ag y del Bi-2212, se ha utilizado un método de síntesis de estos materiales por medio de técnicas sol-gel para asegurar una buena homogeneidad y un tamaño de partícula reducido en la cerámica de

  5. Wireless smart shipboard sensor network

    Nozik, Andrew B.

    2005-01-01

    This thesis studies the feasibility of developing a smart shipboard sensor network. The objective of the thesis is to prove that sensors can be made smart by keeping calibration constants and other relevant data such as network information stored on the sensor and a server computer. Study will focus on the design and implementation of an Ipsil IP(micro)8930 microcontroller, which is then connected, by the standard TCP/IP implementation, to a network where the sensor information can be see...

  6. Security For Wireless Sensor Network

    Saurabh Singh,; Dr. Harsh Kumar Verma

    2011-01-01

    Wireless sensor network is highly vulnerable to attacks because it consists of various resourceconstrained devices with their low battery power, less memory, and associated low energy. Sensor nodescommunicate among themselves via wireless links. However, there are still a lot of unresolved issues in wireless sensor networks of which security is one of the hottest research issues. Sensor networks aredeployed in hostile environments. Environmental conditions along with resource-constraints give...

  7. Wearable bio and chemical sensors

    Coyle, Shirley; Curto, Vincenzo F.; Benito-Lopez, Fernando; Florea, Larisa; Diamond, Dermot

    2014-01-01

    Chemical and biochemical sensors have experienced tremendous growth in the past decade due to advances in material chemistry combined with the emergence of digital communication technologies and wireless sensor networks (WSNs) [1]. The emergence of wearable chemical and biochemical sensors is a relatively new concept that poses unique challenges to the field of wearable sensing. This is because chemical sensors have a more complex mode of operation, compared to physical transducers, in that t...

  8. Biomimetic Flow Sensors

    Casas, J.; Liu, Chang; Krijnen, Gijsbertus J.M.

    2012-01-01

    Biomimetic flow sensors are biologically inspired devices that measure the speed and direction of fluids. This survey starts by describing the role and functioning of airflow-sensing hairs in arthropods and in fishes, carries on with the biomimetic MEMS implementations, both for air and water flow

  9. Miniaturized wireless sensor network

    Lecointre , Aubin; Dragomirescu , Daniela; Dubuc , David; Grenier , Katia; Pons , Patrick; Aubert , Hervé; Müller , A.; Berthou , Pascal; Gayraud , Thierry; Plana , Robert

    2006-01-01

    This paper addresses an overview of the wireless sensor networks. It is shown that MEMS/NEMS technologies and SIP concept are well suited for advanced architectures. It is also shown analog architectures have to be compatible with digital signal techniques to develop smart network of microsystem.

  10. Flexible magnetoimpidence sensor

    Kavaldzhiev, Mincho

    2015-05-01

    Recently, flexible electronic devices have attracted increasing interest, due to the opportunities they promise for new applications such as wearable devices, where the components are required to flex during normal use[1]. In this light, different magnetic sensors, like microcoil, spin valve, giant magnetoresistance (GMR), magnetoimpedance (MI), have been studied previously on flexible substrates.

  11. Mining robotics sensors

    Green, JJ

    2012-04-01

    Full Text Available of threedimensional cameras (SR 4000 and XBOX Kinect) and a thermal imaging sensor (FLIR A300) in order to create 3d thermal models of narrow mining stopes. This information can be used in determining the risk of rockfall in an underground mine, which is a major...

  12. Distributed sensor networks

    Rubin, Donald B; Carlin, John B; Iyengar, S Sitharama; Brooks, Richard R; University, Clemson

    2014-01-01

    An Overview, S.S. Iyengar, Ankit Tandon, and R.R. BrooksMicrosensor Applications, David ShepherdA Taxonomy of Distributed Sensor Networks, Shivakumar Sastry and S.S. IyengarContrast with Traditional Systems, R.R. BrooksDigital Signal Processing Background, Yu Hen HuImage-Processing Background Lynne Grewe and Ben ShahshahaniObject Detection and Classification, Akbar M. SayeedParameter Estimation David FriedlanderTarget Tracking with Self-Organizing Distributed Sensors R.R. Brooks, C. Griffin, D.S. Friedlander, and J.D. KochCollaborative Signal and Information Processing: AnInformation-Directed Approach Feng Zhao, Jie Liu, Juan Liu, Leonidas Guibas, and James ReichEnvironmental Effects, David C. SwansonDetecting and Counteracting Atmospheric Effects Lynne L. GreweSignal Processing and Propagation for Aeroacoustic Sensor Networks, Richard J. Kozick, Brian M. Sadler, and D. Keith WilsonDistributed Multi-Target Detection in Sensor Networks Xiaoling Wang, Hairong Qi, and Steve BeckFoundations of Data Fusion f...

  13. Thick film hydrogen sensor

    Hoffheins, Barbara S.; Lauf, Robert J.

    1995-01-01

    A thick film hydrogen sensor element includes an essentially inert, electrically-insulating substrate having deposited thereon a thick film metallization forming at least two resistors. The metallization is a sintered composition of Pd and a sinterable binder such as glass frit. An essentially inert, electrically insulating, hydrogen impermeable passivation layer covers at least one of the resistors.

  14. Carbon dioxide sensor

    Dutta, Prabir K [Worthington, OH; Lee, Inhee [Columbus, OH; Akbar, Sheikh A [Hilliard, OH

    2011-11-15

    The present invention generally relates to carbon dioxide (CO.sub.2) sensors. In one embodiment, the present invention relates to a carbon dioxide (CO.sub.2) sensor that incorporates lithium phosphate (Li.sub.3PO.sub.4) as an electrolyte and sensing electrode comprising a combination of lithium carbonate (Li.sub.2CO.sub.3) and barium carbonate (BaCO.sub.3). In another embodiment, the present invention relates to a carbon dioxide (CO.sub.2) sensor has a reduced sensitivity to humidity due to a sensing electrode with a layered structure of lithium carbonate and barium carbonate. In still another embodiment, the present invention relates to a method of producing carbon dioxide (CO.sub.2) sensors having lithium phosphate (Li.sub.3PO.sub.4) as an electrolyte and sensing electrode comprising a combination of lithium carbonate (Li.sub.2CO.sub.3) and barium carbonate (BaCO.sub.3).

  15. Fiber Optic Chemical Sensors

    1993-10-01

    31, 1980. Koyama, Masao and Sato , Yuichi, "Improved Enzyme Sensor for Glucose with an Ultra-Filtration Membrane and Immobilized Glucose Oxidase...ion Process," American Laboratory, AVO, AIS, 54-59, 1989. Kaihara, Mikio ; Mametsuka, Hiroaki; Gunji, Naoki; Iwata, Hideo and Gohshi,, "New Dilution

  16. Virtual Sensor Web Architecture

    Bose, P.; Zimdars, A.; Hurlburt, N.; Doug, S.

    2006-12-01

    NASA envisions the development of smart sensor webs, intelligent and integrated observation network that harness distributed sensing assets, their associated continuous and complex data sets, and predictive observation processing mechanisms for timely, collaborative hazard mitigation and enhanced science productivity and reliability. This paper presents Virtual Sensor Web Infrastructure for Collaborative Science (VSICS) Architecture for sustained coordination of (numerical and distributed) model-based processing, closed-loop resource allocation, and observation planning. VSICS's key ideas include i) rich descriptions of sensors as services based on semantic markup languages like OWL and SensorML; ii) service-oriented workflow composition and repair for simple and ensemble models; event-driven workflow execution based on event-based and distributed workflow management mechanisms; and iii) development of autonomous model interaction management capabilities providing closed-loop control of collection resources driven by competing targeted observation needs. We present results from initial work on collaborative science processing involving distributed services (COSEC framework) that is being extended to create VSICS.

  17. Fast Air Temperature Sensors

    Hendricks, Elbert

    1998-01-01

    The note documents briefly work done on a newly developed sensor for making fast temperature measurements on the air flow in the intake ports of an SI engine and in the EGR input line. The work reviewed has been carried out in close cooperation with Civ. Ing. Michael Føns, the author (IAU...

  18. Wearable Optical Sensors

    Ballard, Zachary S.

    2017-07-12

    The market for wearable sensors is predicted to grow to $5.5 billion by 2025, impacting global health in unprecedented ways. Optics and photonics will play a key role in the future of these wearable technologies, enabling highly sensitive measurements of otherwise invisible information and parameters about our health and surrounding environment. Through the implementation of optical wearable technologies, such as heart rate, blood pressure, and glucose monitors, among others, individuals are becoming more empowered to generate a wealth of rich, multifaceted physiological and environmental data, making personalized medicine a reality. Furthermore, these technologies can also be implemented in hospitals, clinics, point-of-care offices, assisted living facilities or even in patients’ homes for real-time, remote patient monitoring, creating more expeditious as well as resource-efficient systems. Several key optical technologies make such sensors possible, including e.g., optical fiber textiles, colorimetric, plasmonic, and fluorometric sensors, as well as Organic Light Emitting Diode (OLED) and Organic Photo-Diode (OPD) technologies. These emerging technologies and platforms show great promise as basic sensing elements in future wearable devices and will be reviewed in this chapter along-side currently existing fully integrated wearable optical sensors.

  19. ISFET based enzyme sensors

    van der Schoot, Bart H.; Bergveld, Piet

    1987-01-01

    This paper reviews the results that have been reported on ISFET based enzyme sensors. The most important improvement that results from the application of ISFETs instead of glass membrane electrodes is in the method of fabrication. Problems with regard to the pH dependence of the response and the

  20. Wireless Sensor Networks Approach

    Perotti, Jose M.

    2003-01-01

    This viewgraph presentation provides information on hardware and software configurations for a network architecture for sensors. The hardware configuration uses a central station and remote stations. The software configuration uses the 'lost station' software algorithm. The presentation profiles a couple current examples of this network architecture in use.

  1. Cleaning of contaminated soils with hydrocarbons by biocell; Saneamiento de suelos contaminados con hidrocarburos mediante biopilas

    Iturbe-Arguelles, R.; Flores-Torres, C; Chavez-Lopez, C.; Roldan-Martin, A [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

    2002-03-01

    In 1990 the Instituto de Ingenieria de la UNAM, initiated an evaluation through the soil and groundwater sampling and a risk health assessment in a Mexican refinery. An extended area was found contaminated with hydrocarbons. This area requires a soil remediation, taking into account that some zones present more than 30 000 mg/kg of Total Petroleum Hydrocarbons (TPH). Biopile system was recommended as the best remediation method to diminish TPG and some poliaromathic hydrocarbons (PAH). Therefore an experimental biopile of 30 m3 was constructed with contaminated soil. After 22 weeks, results show more than 80 % of TPH and PAH remotion. [Spanish] El grupo de saneamiento de suelos y acuiferos del Instituto de Ingenieria de la UNAM, inicio en 1999 la evaluacion de la contaminacion del subsuelo de una refineria en una zona costera del pais, mediante el muestreo de 425 puntos a 1.5 m de profundidad y con el analisis de los siguientes parametros: hidrocarburos totales del petroleo (HTP), hidrocarburo poliaromaticos (HAP), diesel, gasolina, metilterbutileter (MTBE) y los metales hierro, vanadio, zinc, cadmio, cromo y plomo. Asimismo, se lleva a cabo una evaluacion de riesgo a la salud a fin de determinar los niveles de limpieza de las areas contaminadas. Una vez realizado el estudio se propuso probar a nivel piloto dos tecnicas de saneamiento para las areas contaminadas con valores superiores a 30 000 mg/Kg de http, o bien, para las zonas en donde la evaluacion de riesgo a la salud indica la existencia de riesgo para uno o mas compuestos. Las tecnicas propuesta son biopilas y lavado de suelos con surfactantes. En este trabajo se presenta la prueba piloto con biopilas, de la cual se obtuvo una eficiencia de remocion de http del 80 porciento con cinco meses de operacion. Se muestra las partes de una biopila y se dan los resultados de la biopila experimental en la refineria Francisco I. Madero.

  2. ESTIMACIÓN ROBUSTA DE MODELOS ADITIVOS MEDIANTE EL ALGORITMO DE BACKFITTING

    Luis P. Yapu Quispe

    2012-07-01

    Full Text Available En este trabajo se presenta un método de estimación y simulación de un modelo aditivo a dos variables mediante splines robustos, el método general puede ser aplicado con varias variables. El software utilizado para las simulaciones es S+ y se utiliza explícitamente la función smooth.splineRob en una implementación del algoritmo de backfitting. La función smooth.splineRob ha sido escrita en base al trabajo de Cantoni y Ronchetti [3], en el cual se pone énfasis en la selección robusta del parámetro de suavizamiento utilizando una versión robusta del Cp de Mallows, RCp, y de la validación cruzada, RCV. La existencia de datos extremos o no-normales en la parte estocástica de un modelo aditivo puede provocar una mala estimación del parámetro de suavizamiento, lo que tendrá influencia global en la estimación por splines. Para la etapa de simulación se realizan las estimaciones por splines clásicos y robustos (con estimación robusta del parámetro. La estimación obtenida es muy convincente pero el tiempo de ejecución del programa es relativamente elevado tanto para RCp y RCV, aun cuando, en ciertos casos, con pocas iteraciones robustas se obtienen ya resultados más útiles que la estimación clásica.

  3. Análisis del rendimiento academico mediante un modelo logit

    María del Carmen Ibarra

    2010-07-01

    Full Text Available Este trabajo analiza el rendimiento académico de los estudiantes de la Facultad de Ingeniería de la Universidad Nacional de Misiones; la población objetivo está conformada por los alumnos de las cohortes 1999 a 2003 (589 estudiantes. Se define al rendimiento académico como el promedio de materias aprobadas anualmente y mediante la técnica estadística multivariada de Regresión Logística, se determina la incidencia que tienen diferentes factores de índole personal, socioeconómica y académica. Los resultados obtenidos permiten concluir que las variables significativas del rendimiento académico son: el promedio de calificaciones del nivel medio, el tipo de Institución donde cursó estos estudios y el número de asignaturas aprobadas en el primer año de carrera, siendo este último factor el más relevante, destacando la importancia de esta primera etapa de la carrera en los posteriores resultados académicos del estudiante. The purpose of this work is to analyse the determining factors which influence students’ performance at university. The research has been carried out on five (5 engineering students’ cohorts (1999-2003 from Universidad Nacional de Misiones (UNaM and includes 589 students. The academic performance is defined as average subjects approved annually. By means of the Logistic Regression technique, we determine the impact of different personal, socioeconomic and academic factors. The main conclusion that can be drawn is that students’ performance, is related to the grade point average (GPA at high school, the kind of high school (public or private students had attended, and the number of passing subjects in their first year at university. The latter being the most important factor, emphasizing the importance of this first stage at the Universtity in the student’s academic performance.

  4. Método para el Modelado y Prueba de Diagramas de Actividades Mediante Redes de Petri

    Lionel Baquero Hernández

    2015-11-01

    Full Text Available Las redes de Petri son ideales para describir y estudiar sistemas que procesan información y con características concurrentes, asíncronas, distribuidas, paralelas, no determinísticas y/o estocásticas. . Sin embargo, la teoría clásica de estas redes se enfrenta al desafío de adecuarse a las nuevas necesidades de los sistemas informáticos que los ingenieros diseñan en la actualidad. Un diagrama de actividades representa una secuencia de actividades. Podría aplicarse a cualquier propósito, pero se considera especialmente útil para visualizar los flujos de trabajo y los procesos del negocio, o casos de uso. El presente trabajo se ha desarrollado con el objetivo de diseñar un método para el modelado y prueba de diagramas de actividades mediante redes de Petri. El método propuesto brinda una serie de pasos necesarios para modelar un diagrama de actividades con redes de Petri y a partir de dicha red obtener una representación matemática de la misma. Esta representación matemática se utiliza para con ella realizar una serie de operaciones basadas en el marcaje de la red que permiten realizar pruebas al diagrama. Este método es capaz de identificar errores comunes que se cometen en el modelado de los diagramas de actividades, lo cual se demostró a través del método de experimentación.

  5. Reconstrucción de defectos amplios en tronco mediante colgajo de perforante en piedra clave

    J. Aguilera-Sáez

    Full Text Available El colgajo en piedra clave (Keystone Perforator Island Flap KPIF, es un colgajo local fasciocutáneo en isla que no requiere identificación de perforantes, descrito por Behan en 2003, que permite el cierre en un único acto quirúrgico tanto del defecto como de la zona dadora sin precisar, generalmente, autoinjerto cutáneo. Nuestro objetivo es el mostrar la utilidad de este colgajo para la cobertura de defectos amplios en tronco. De los más de 120 casos realizados en nuestro Servicio con esta técnica sin tener en cuenta la localización del problema entre abril de 2011 y abril de 2013, presentamos 5 casos que, tras resección quirúrgica por diferentes etiologías, fueron los que presentaron defectos de cobertura de mayor tamaño en tronco (entre 10 y 25 cm de diámetro máximo que fueron solventados satisfactoriamente mediante el KPIF. En todos obtuvimos un cierre directo tanto de la zona del defecto como de la zona dadora, sin complicaciones durante el acto quirúrgico ni en el postoperatorio, con resultados estéticos óptimos, sin deformidades significativas ni alteraciones funcionales. Creemos que el KPIF es un colgajo óptimo para la cobertura de defectos amplios en el tronco ya que permite cubrir el defecto y hacer un cierre primario de la zona dadora generando poca morbilidad, con un buen resultado estético, con un corto tiempo quirúrgico y con un bajo coste.

  6. PoV-GAME: PUNTOS DE VISTA MEDIANTE JUEGOS PoV-GAME: VIEWPOINTS THROUGH GAMES

    Carlos Zapata-Jaramillo

    2012-06-01

    Full Text Available El desarrollo de proyectos de software considera importante la consistencia entre la información entregada por todos los interesados de una aplicación. En otras palabras, se procura llegar a acuerdos entre los diferentes puntos de vista de cada actor y llevarlos a cabo durante todo el proyecto. Con los métodos de enseñanza tradicionales se procura formar habilidades en este campo, pero no se afianzan mediante la práctica que, generalmente, se emplea para el aprendizaje en este campo. Por ello, en este artículo se propone ''PoV-GAME'', una nueva forma de ''jugar aprendiendo'', la cual busca fortalecer algunos conceptos básicos en la ingeniería de software como la consistencia en la información que se maneja a lo largo de un proyecto y afianzar la importancia de los puntos de vista en el desarrollo de un producto de software. Posteriormente, se analizan los resultados obtenidos luego de realizar el juego en diferentes grupos de estudiantes.Information for software applications is delivered by the stakeholders. Software development projects need consistency as an important aspect of such information. In other words, agreement among the different viewpoints must be reached in order to be implemented in the project. Well-known teaching methods try to create capabilities in this field, but they fail in reinforcing them in practice, which is commonly used for teaching in this field. Therefore, in this paper we propose ''PoV GAME'' a new way of ''play-to-learn''. We aim the reinforcement of some basic concepts about software engineering such as consistency in the information handled throughout the project, and the importance of viewpoints in the software product development. Subsequently, we analyze the results obtained after holding the game in several groups of students.

  7. Diagnóstico de Fallos en Sistemas Híbridos Mediante Anidamiento Latente de Fallos

    Orestes Llanes Santiago

    2010-09-01

    Full Text Available Normal 0 21 false false false ES-TRAD X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Este artículo presenta un nuevo enfoque para la detección y diagnóstico de fallos (SDDF en sistemas híbridos denominado de Anidamiento Latente de Fallos. La misma está basada en el uso de Redes de Petri Coloreadas (RdPCs que aportan su capacidad intrínseca de síntesis y de implementación en modelos realizables. Esta técnica se contrapone al clásico fenómeno de explosión combinacional que se produce mediante la utilización de metodologías basadas en Máquinas de Estados Finitos (MEFs.

  8. Caracterización microestructural de aleaciones base cobre obtenidas mediante molienda reactiva

    Palma, R.

    2010-06-01

    Full Text Available The micro and nanostructure of Cu-Al, Cu-V and Cu-Ti alloys produced by reactive milling were analyzed using X-ray diffraction (XRD and transmission electron microscopy (TEM. Samples with different milling times (t= 0, 10, 20 and 30 h were considered. The grain size, dislocation density and residual microstrain were evaluated form the XRD data using the Williamson-Hall and Klug-Alexander methods. The evolution of texture as a function of milling time was also studied using XRD. It was found, using TEM, that the grain size and dispersoid size were nanometric in all three alloys considered.

    Se analizó la micro y nano estructura de aleaciones Cu-Al, Cu-V y Cu-Ti obtenidas por molienda reactiva, mediante difracción de rayos X (XRD y microscopía electrónica de transmisión (TEM. Se consideraron muestras con distintos tiempos de molienda (t= 0, 10, 20 y 30 h. A partir de los datos XRD, usando los métodos de Williamson- Hall y Klug-Alexander, se evaluaron el tamaño de grano, la densidad de dislocaciones y la microdeformación residual; también se estudió la evolución de la textura de la matriz de cobre en función del tiempo de molienda. En los polvos molidos durante 30 h, de las tres aleaciones consideradas, se encontró, por TEM, que los tamaños de grano y de los dispersoides desarrollados son nanométricos.

  9. Tratamiento quirúrgico de las lesiones intradurales extramedulares mediante hemilaminectomía

    Villalonga, Juan F.; Cervio, Andrés

    2017-01-01

    Resumen Objetivo: Evaluar la utilidad de la hemilaminectomía como abordaje quirúrgico en pacientes con tumores intradurales-extramedulares. Material y métodos: Estudio descriptivo retrospectivo que incluye a 53 pacientes en los que se utilizó la hemilaminectomía como abordaje a tumores intradurales-extramedulares durante el periodo junio de 2006 a diciembre de 2015. Se analizaron datos demográficos, signo-sintomatología preoperatoria, características imagenológicas, hallazgos intraoperatorios, estirpe histológico y complicaciones post-quirúrgicas. El periodo de seguimiento promedio fue de 48.9 meses (6-120 meses). Resultados: Cincuenta y tres pacientes con tumores intradurales-extramedulares fueron intervenidos mediante hemilaminectomía. La serie incluyó 5 tumores cervicales, 24 dorsales y 24 lumbares. El análisis histológico reveló 28 neurinomas, 11 meningiomas, 7 ependimomas y 7 “lesiones varias”. En el 96% de los casos se efectuó una exéresis total sin causar déficit neurológico agregado. No se evidenció recidiva en ninguno de los casos durante el periodo de seguimiento. Conclusión: La hemilaminectomía constituye una vía efectiva para la resección de tumores intradurales-extramedulares lateralizados a nivel cervicodorsal. Mientras que a nivel lumbar esta técnica puede ser también útil en lesiones de línea media. PMID:29142776

  10. PREACONDICIONAMIENTO DE Pinus engelmannii Carr. MEDIANTE DÉFICIT DE RIEGO EN VIVERO

    Israel J. Ávila-Flores

    2014-01-01

    Full Text Available Con el objetivo de mejorar el preacondicionamiento de plántulas de Pinus engelmannii Carr. en vivero, se evaluaron tres frecuencias de riego: 48, 96 y 192 h. Las plántulas de ocho meses de edad se evaluaron durante 40 días. El ensayo se desarrolló en condiciones de invernadero en el vivero del Campo Experimental Valle del Guadiana del INIFAP. Los datos se analizaron mediante prueba de permutaciones. Los resultados muestran que el riego cada 48 h causó los mejores efectos en altura (7.70 cm, diámetro (4.38 mm, biomasa total (6.59 g e índice de calidad de Dickson (0.55. Por otro lado, el estrés hídrico originado por el tratamiento con riego cada 192 h (-1.22 MPa limitó el crecimiento de las plántulas; sin embargo, el índice de lignificación (26.63 fue significativa - mente mejor ( P = 0.0001 con esta frecuencia de riego. A pesar de haberse encontrado diferencias im - portantes ( P = 0.0001 en el potencial hídrico y en las variables morfológicas, no se encontró evidencia suficiente que permita definir un tratamiento absolutamente superior para mejorar el preacondiciona - miento de las plántulas en vivero. Por lo tanto, es recomendable evaluar dichos tratamientos durante mayor tiempo, además de evaluarlos en campo.

  11. Combate del moho gris (Botrytis cinerea de la fresa mediante Gliocladium roseum

    Néstor Chaves

    2004-01-01

    Full Text Available En la zona de Poasito de Alajuela, se evaluó la acción del antagonista Gliocladium roseum, en forma individual y en conjunto con los fungicidas empleados en la finca, para el combate de Botrytis cinerea en fresa; comparándose los resultados contra los obtenidos con el manejo comercial. Se empleó un diseño de bloques completos al azar con 4 repeticiones y se hicieron aplicaciones semanales del antagonista (a una concentración ³ 107 conidios ml-1 durante un período aproximado de 4 meses (julio-octubre del 2000. Se evaluó la incidencia de moho gris en condiciones de campo y poscosecha, así como el efecto de los fungicidas aplicados sobre la germinación de los conidios del antagonista, mediante una prueba in vitro. Se obtuvo un combate más efectivo de la enfermedad en condiciones de campo al emplear el biocontrolador sólo o en conjunto con los fungicidas, con respecto al manejo comercial que se hace de la misma. En poscosecha, el desempeño del antagonista fue estadísticamente igual al del combate químico. Estos resultados muestran que los fungicidas aplicados no afectan considerablemente al antagonista, lo que se corroboró con la prueba in vitro. Al emplear G. roseum para el combate de B. cinerea no sólo se logra combatir efectivamente a este, sino también el resto de los patógenos (Colletotrichum, Phytophthora, Rhizoctonia, Rhizopus,Alternaria, Fusarium, Verticillium y Penicillium, ya que el porcentaje de frutas sanas es mayor al integrar la acción del antagonista al manejo de enfermedades de la finca. Sin embargo, estas diferencias no son estadísticamente significativas. Por lo anterior se concluye que G. roseum constituye una posible alternativa de manejo integrado del moho gris en fresa.

  12. Estudio del crecimiento de Prioria copaifera (Caesalpinaceae mediante técnicas dendrocronológicas

    Jorge Andrés Giraldo Jiménez

    2011-12-01

    Full Text Available El cativo (Prioria copaifera G. forma bosques dominados por la especie llamados cativales. Durante más de 70 años el cativo ha sido la base principal de la industria maderera en el Darién colombiano, siendo, por su alta productividad y dominancia uno de los bosques tropicales más fáciles de ordenar sosteniblemente. El propósito de esta investigación es modelar el crecimiento del diámetro y el volumen del cativo en función de la edad así como las tasas instantáneas, medias y relativas, empleando anillos de crecimiento. La anualidad de los anillos se demostró usando el efecto de las bombas nucleares y mediante cofechado. Con base en los anillos de crecimiento radiales se modelo el crecimiento del diámetro y del volumen. Esta especie alcanza 40cm de diámetro en 90 años y presenta crecimiento medio de 0.31cm/año. El lapso vital de la especie es de aproximadamente 614 años. El incremento corriente anual máximo del volumen a los 90 años es 0.033m3/año, e iguala al incremento medio a los 145 años con 0.018m3/año. La tasa media de crecimiento absoluta es 0.021m3/año. Los resultados aquí obtenidos sirven como base técnica para el manejo sostenible de los cativales.

  13. Magnetic Nanocomposite Cilia Sensors

    Alfadhel, Ahmed

    2016-07-19

    Recent progress in the development of artificial skin concepts is a result of the increased demand for providing environment perception such as touch and flow sensing to robots, prosthetics and surgical tools. Tactile sensors are the essential components of artificial skins and attracted considerable attention that led to the development of different technologies for mimicking the complex sense of touch in humans. This dissertation work is devoted to the development of a bioinspired tactile sensing technology that imitates the extremely sensitive hair-like cilia receptors found in nature. The artificial cilia are fabricated from permanent magnetic, biocompatible and highly elastic nanocomposite material, and integrated on a giant magneto-impedance magnetic sensor to measure the stray field. A force that bends the cilia changes the stray field and is therefore detected with the magnetic sensor, providing high performance in terms of sensitivity, power consumption and versatility. The nanocomposite is made of Fe nanowires (NWs) incorporated into polydimethylsiloxane (PDMS). Fe NWs have a high remanent magnetization, due the shape anisotropy; thus, they are acting as permanent nano-magnets. This allows remote device operation and avoids the need for a magnetic field to magnetize the NWs, benefiting miniaturization and the possible range of applications. The magnetic properties of the nanocomposite can be easily tuned by modifying the NWs concentration or by aligning the NWs to define a magnetic anisotropy. Tactile sensors are realized on flexible and rigid substrates that can detect flow, vertical and shear forces statically and dynamically, with a high resolution and wide operating range. The advantage to operate the sensors in liquids and air has been utilized to measure flows in different fluids in a microfluidic channel. Various dynamic studies were conducted with the tactile sensor demonstrating the detection of moving objects or the texture of objects. Overall

  14. Emissive sensors and devices incorporating these sensors

    Swager, Timothy M; Zhang, Shi-Wei

    2013-02-05

    The present invention generally relates to luminescent and/or optically absorbing compositions and/or precursors to those compositions, including solid films incorporating these compositions/precursors, exhibiting increased luminescent lifetimes, quantum yields, enhanced stabilities and/or amplified emissions. The present invention also relates to sensors and methods for sensing analytes through luminescent and/or optically absorbing properties of these compositions and/or precursors. Examples of analytes detectable by the invention include electrophiles, alkylating agents, thionyl halides, and phosphate ester groups including phosphoryl halides, cyanides and thioates such as those found in certain chemical warfare agents. The present invention additionally relates to devices and methods for amplifying emissions, such as those produced using the above-described compositions and/or precursors, by incorporating the composition and/or precursor within a polymer having an energy migration pathway. In some cases, the compositions and/or precursors thereof include a compound capable of undergoing a cyclization reaction.

  15. Sensor system for web inspection

    Sleefe, Gerard E.; Rudnick, Thomas J.; Novak, James L.

    2002-01-01

    A system for electrically measuring variations over a flexible web has a capacitive sensor including spaced electrically conductive, transmit and receive electrodes mounted on a flexible substrate. The sensor is held against a flexible web with sufficient force to deflect the path of the web, which moves relative to the sensor.

  16. Interfacing Sensors To Micro Controllers

    Norain, Mohamed

    2018-01-01

    This lecture will cover the most common interface and interface techniques between sensors and microcontrollers. The presentation will introduce the pros and cons of each interface type including analogue, digital and serial output sensors. It will also cover the basic required electronics knowledge to help you in selecting and designing your next sensor to microcontroller interface.

  17. Interfacing Sensors To Micro Controllers

    Norain, Mohamed

    2018-01-15

    This lecture will cover the most common interface and interface techniques between sensors and microcontrollers. The presentation will introduce the pros and cons of each interface type including analogue, digital and serial output sensors. It will also cover the basic required electronics knowledge to help you in selecting and designing your next sensor to microcontroller interface.

  18. Micromachined pressure/flow-sensor

    Oosterbroek, R.E.; Lammerink, Theodorus S.J.; Berenschot, Johan W.; Krijnen, Gijsbertus J.M.; Elwenspoek, Michael Curt; van den Berg, Albert

    1999-01-01

    The micromechanical equivalent of a differential pressure flow-sensor, well known in macro mechanics, is discussed. Two separate pressure sensors are used for the device, enabling to measure both, pressure as well as volume flow-rate. An integrated sensor with capacitive read-out as well as a

  19. USGS VDP Infrasound Sensor Evaluation

    Slad, George William [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Merchant, Bion J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-10-01

    Sandia National Laboratories has tested and evaluated two infrasound sensors, the model VDP100 and VDP250, built in-house at the USGS Cascades Volcano Observatory. The purpose of the infrasound sensor evaluation was to determine a measured sensitivity, self-noise, dynamic range and nominal transfer function. Notable features of the VDP sensors include novel and durable construction and compact size.

  20. Smart Home Wireless Sensor Nodes

    Lynggaard, Per

    . This paper introduces an approach that considerably lowers the wireless sensor node power consumption and the amount of transmitted sensor events. It uses smart objects that include artificial intelligence to efficiently process the sensor event on location and thereby saves the costly wireless...

  1. Magnetic Nanocomposite Cilia Tactile Sensor

    Alfadhel, Ahmed; Kosel, Jü rgen

    2015-01-01

    A multifunctional biomimetic nanocomposite tactile sensor is developed that can detect shear and vertical forces, feel texture, and measure flow with extremely low power consumption. The sensor's high performance is maintained within a wide operating range that can be easily adjusted. The concept works on rigid and flexible substrates and the sensors can be used in air or water without any modifications.

  2. Micro Coriolis Gas Density Sensor

    Sparreboom, Wouter; Ratering, Gijs; Kruijswijk, Wim; van der Wouden, E.J.; Groenesteijn, Jarno; Lötters, Joost Conrad

    2017-01-01

    In this paper we report on gas density measurements using a micro Coriolis sensor. The technology to fabricate the sensor is based on surface channel technology. The measurement tube is freely suspended and has a wall thickness of only 1 micron. This renders the sensor extremely sensitive to changes

  3. Time-domain fiber loop ringdown sensor and sensor network

    Kaya, Malik

    Optical fibers have been mostly used in fiber optic communications, imaging optics, sensing technology, etc. Fiber optic sensors have gained increasing attention for scientific and structural health monitoring (SHM) applications. In this study, fiber loop ringdown (FLRD) sensors were fabricated for scientific, SHM, and sensor networking applications. FLRD biosensors were fabricated for both bulk refractive index (RI)- and surface RI-based DNA sensing and one type of bacteria sensing. Furthermore, the effect of glucose oxidase (GOD) immobilization at the sensor head on sensor performance was evaluated for both glucose and synthetic urine solutions with glucose concentration between 0.1% and 10%. Detection sensitivities of the glucose sensors were achieved as low as 0.05%. For chemical sensing, heavy water, ranging from 97% to 10%, and several elemental solutions were monitored by using the FLRD chemical sensors. Bulk index-based FLRD sensing showed that trace elements can be detected in deionized water. For physical sensing, water and cracking sensors were fabricated and embedded into concrete. A partially-etched single-mode fiber (SMF) was embedded into a concrete bar for water monitoring while a bare SMF without any treatment was directly embedded into another concrete bar for monitoring cracks. Furthermore, detection sensitivities of water and crack sensors were investigated as 10 ml water and 0.5 mm surface crack width, respectively. Additionally fiber loop ringdown-fiber Bragg grating temperature sensors were developed in the laboratory; two sensor units for water, crack, and temperature sensing were deployed into a concrete cube in a US Department of Energy test bed (Miami, FL). Multi-sensor applications in a real concrete structure were accomplished by testing the six FLRD sensors. As a final stage, a sensor network was assembled by multiplexing two or three FLRD sensors in series and parallel. Additionally, two FLRD sensors were combined in series and

  4. Wireless sensor network

    Perotti, Jose M.; Lucena, Angel R.; Mullenix, Pamela A.; Mata, Carlos T.

    2006-05-01

    Current and future requirements of aerospace sensors and transducers demand the design and development of a new family of sensing devices, with emphasis on reduced weight, power consumption, and physical size. This new generation of sensors and transducers will possess a certain degree of intelligence in order to provide the end user with critical data in a more efficient manner. Communication between networks of traditional or next-generation sensors can be accomplished by a Wireless Sensor Network (WSN) developed by NASA's Instrumentation Branch and ASRC Aerospace Corporation at Kennedy Space Center (KSC), consisting of at least one central station and several remote stations and their associated software. The central station is application-dependent and can be implemented on different computer hardware, including industrial, handheld, or PC-104 single-board computers, on a variety of operating systems: embedded Windows, Linux, VxWorks, etc. The central stations and remote stations share a similar radio frequency (RF) core module hardware that is modular in design. The main components of the remote stations are an RF core module, a sensor interface module, batteries, and a power management module. These modules are stackable, and a common bus provides the flexibility to stack other modules for additional memory, increased processing, etc. WSN can automatically reconfigure to an alternate frequency if interference is encountered during operation. In addition, the base station will autonomously search for a remote station that was perceived to be lost, using relay stations and alternate frequencies. Several wireless remote-station types were developed and tested in the laboratory to support different sensing technologies, such as resistive temperature devices, silicon diodes, strain gauges, pressure transducers, and hydrogen leak detectors.

  5. Electrodos de PVC/TTF-TCNQ modificados. Aplicación como sensores y biosensores electroquímicos

    Sánchez-Obrero, Guadalupe

    2013-01-01

    En este trabajo de Tesis Doctoral, se estudia el desarrollo de nuevos electrodos, basados en la modificación del electrodo compósito PVC/TTF-TCNQ, mediante nanopartículas de oro. Se pretende que estos nuevos electrodos sean susceptibles de ser empleados como sensores y/o biosensores electroquímicos, para la detección de analitos de interés. De ellos, se han elegido para su determinación la glucosa, el paracetamol y los compuestos fenólicos presentes en los vinos. La Tesis Doctoral está es...

  6. Instalación eléctrica de una vivienda unifamiliar aislada mediante suministro de energías renovables

    LOZANO VALLADOLID, FERNANDO

    2015-01-01

    [ES] Instalación eléctrica con grado de electrificación elevada de una vivienda unifamiliar aislada mediante suministro de energías renovables (solar, eólica, geotérmicas). Lozano Valladolid, F. (2015). Instalación eléctrica de una vivienda unifamiliar aislada mediante suministro de energías renovables. http://hdl.handle.net/10251/58751. TFGM

  7. Activity Recognition Invariant to Sensor Orientation with Wearable Motion Sensors.

    Yurtman, Aras; Barshan, Billur

    2017-08-09

    Most activity recognition studies that employ wearable sensors assume that the sensors are attached at pre-determined positions and orientations that do not change over time. Since this is not the case in practice, it is of interest to develop wearable systems that operate invariantly to sensor position and orientation. We focus on invariance to sensor orientation and develop two alternative transformations to remove the effect of absolute sensor orientation from the raw sensor data. We test the proposed methodology in activity recognition with four state-of-the-art classifiers using five publicly available datasets containing various types of human activities acquired by different sensor configurations. While the ordinary activity recognition system cannot handle incorrectly oriented sensors, the proposed transformations allow the sensors to be worn at any orientation at a given position on the body, and achieve nearly the same activity recognition performance as the ordinary system for which the sensor units are not rotatable. The proposed techniques can be applied to existing wearable systems without much effort, by simply transforming the time-domain sensor data at the pre-processing stage.

  8. Open Standards for Sensor Information Processing

    Pouchard, Line Catherine [ORNL; Poole, Stephen W [ORNL; Lothian, Josh [ORNL

    2009-07-01

    This document explores sensor standards, sensor data models, and computer sensor software in order to determine the specifications and data representation best suited for analyzing and monitoring computer system health using embedded sensor data. We review IEEE 1451, OGC Sensor Model Language and Transducer Model Language (TML), lm-sensors and Intelligent Platform Management Inititative (IPMI).

  9. CMOS Integrated Carbon Nanotube Sensor

    Perez, M. S.; Lerner, B.; Boselli, A.; Lamagna, A.; Obregon, P. D. Pareja; Julian, P. M.; Mandolesi, P. S.; Buffa, F. A.

    2009-01-01

    Recently carbon nanotubes (CNTs) have been gaining their importance as sensors for gases, temperature and chemicals. Advances in fabrication processes simplify the formation of CNT sensor on silicon substrate. We have integrated single wall carbon nanotubes (SWCNTs) with complementary metal oxide semiconductor process (CMOS) to produce a chip sensor system. The sensor prototype was designed and fabricated using a 0.30 um CMOS process. The main advantage is that the device has a voltage amplifier so the electrical measure can be taken and amplified inside the sensor. When the conductance of the SWCNTs varies in response to media changes, this is observed as a variation in the output tension accordingly.

  10. Crecimiento de películas delgadas de membranas de conducción iónica mediante la técnica PIMOCVD

    García, G.

    2004-04-01

    Full Text Available In this work, we describe the preparation of YSZ layers on porous and non-porous substrates using the Pulsed Injection MOCVD technique for solid electrolyte applications. In this technique, the vapour phase is obtained by injecting micro-droplets of the desired solution delivered from a container kept at room temperature into a heated evaporator connected to a deposition chamber. The droplet characteristics, volume, precursor concentration and injection frequency will control and determine the thickness and the microstructure of the layers. The system offers a high degree of repeatability of the liquid volume injected and thus a high reproducibility of the layers from low to high growth rates. This process has been optimised in order to obtain dense YSZ membranes to be used as solid electrolytes in SOFC, oxygen generators and oxygen sensors. Future work will consist in the preparation of anode-electrolyte-cathode multilayered devices. For this purpose, experimental parameters have been studied and optimised in order to obtain thin YSZ membranes on dense and porous substrates.

    En este trabajo se presentan los resultados preliminares sobre películas delgadas de YSZ obtenidas mediante la nueva técnica de MOCVD de inyección pulsada para su aplicación como electrolitos sólidos. La originalidad de esta técnica consiste en la preparación e introducción de la fase vapor que se realiza mediante la inyección pulsada de micro-gotas de la solución líquida, que contiene los precursores de los elementos a depositar, dentro de la zona de reacción. Las características de la gota: tamaño, concentración de la solución y frecuencia de inyección determinan el espesor y la micro-estructura de las capas obtenidas. Este método, además de muy reproducible, permite obtener fácilmente estructuras multicapas con bajos ritmos de crecimiento para epitaxias o con altos ritmos de crecimiento para la obtención de heteroestructuras. Se ha puesto a

  11. Characteristic evaluation of acoustic emission sensors

    Jung, Hyun Kyu; Joo, Y. S.; Lee, N. H

    2000-12-01

    This report introduces the various kinds of Acoustic Emission(AE) sensors as well as the basic principle of AE sensors in order to select AE sensor suitably. The described sensors include : high sensitivity sensor, broadband sensor, underwater sensor, miniature sensor, directional sensor, integral pre-amplifier sensor. Sensor has two critical aspects of reliability and repeatability. For the high reliability, sensor has to be calibrated in accordance with ASTM standard E 1106 which explains to measure the characteristics of AE sensor accurately. For investigating the degradation of AE sensor under the severe environment for example the high radiation condition, It is important to perform the repeatability test which is described in detail in according to the ASTM standard E 976. Two kinds of AE sensor applications are also summarized.

  12. Generación de patrones de costura a medida mediante Kinect y Makehuman

    Aldabaldetrecu Orús, Carla

    2016-01-01

    This document corresponds to the End of Bachelor's Project Report (Memoria del Proyecto de Fin de Grado), Generation of sewing patterns using the Kinect and MakeHuman, developed for the Faculty of Computer Engineering at the UPV-EHU university of Donostia-San Sebastián under Blanca Cases supervision, teacher at UPV-EHU University. The project consists in obtaining the measurements of someone by using the Kinect's depth sensor (which was previously achieved by Ibon Olabarria using only the...

  13. Discriminación entre strain y temperatura en un sistema BOTDA mediante redes neuronales artificiales

    Ruiz Lombera, Rubén; Piccolo, Arianna; Fuentes Cayón, Alberto; López Higuera, José Miguel; Mirapeix Serrano, Jesús María

    2017-01-01

    RESUMEN: En este artículo se propone el uso de un enfoque basado en inteligencia artificial, en particular en redes neuronales artificiales, para conseguir una discriminación automática en medidas de strain y temperatura en sistemas sensores distribuidos basados en la dispersión estimulada de Brillouin en fibra óptica, en particular en implementaciones BOTDA. ABSTRACT: We present in this paper the employment of artificial intelligence, in particular artificial neural networks, as a possibl...

  14. Advanced Wireless Sensor Nodes - MSFC

    Varnavas, Kosta; Richeson, Jeff

    2017-01-01

    NASA field center Marshall Space Flight Center (Huntsville, AL), has invested in advanced wireless sensor technology development. Developments for a wireless microcontroller back-end were primarily focused on the commercial Synapse Wireless family of devices. These devices have many useful features for NASA applications, good characteristics and the ability to be programmed Over-The-Air (OTA). The effort has focused on two widely used sensor types, mechanical strain gauges and thermal sensors. Mechanical strain gauges are used extensively in NASA structural testing and even on vehicle instrumentation systems. Additionally, thermal monitoring with many types of sensors is extensively used. These thermal sensors include thermocouples of all types, resistive temperature devices (RTDs), diodes and other thermal sensor types. The wireless thermal board will accommodate all of these types of sensor inputs to an analog front end. The analog front end on each of the sensors interfaces to the Synapse wireless microcontroller, based on the Atmel Atmega128 device. Once the analog sensor output data is digitized by the onboard analog to digital converter (A/D), the data is available for analysis, computation or transmission. Various hardware features allow custom embedded software to manage battery power to enhance battery life. This technology development fits nicely into using numerous additional sensor front ends, including some of the low-cost printed circuit board capacitive moisture content sensors currently being developed at Auburn University.

  15. Communications for unattended sensor networks

    Nemeroff, Jay L.; Angelini, Paul; Orpilla, Mont; Garcia, Luis; DiPierro, Stefano

    2004-07-01

    The future model of the US Army's Future Combat Systems (FCS) and the Future Force reflects a combat force that utilizes lighter armor protection than the current standard. Survival on the future battlefield will be increased by the use of advanced situational awareness provided by unattended tactical and urban sensors that detect, identify, and track enemy targets and threats. Successful implementation of these critical sensor fields requires the development of advanced sensors, sensor and data-fusion processors, and a specialized communications network. To ensure warfighter and asset survivability, the communications must be capable of near real-time dissemination of the sensor data using robust, secure, stealthy, and jam resistant links so that the proper and decisive action can be taken. Communications will be provided to a wide-array of mission-specific sensors that are capable of processing data from acoustic, magnetic, seismic, and/or Chemical, Biological, Radiological, and Nuclear (CBRN) sensors. Other, more powerful, sensor node configurations will be capable of fusing sensor data and intelligently collect and process data images from infrared or visual imaging cameras. The radio waveform and networking protocols being developed under the Soldier Level Integrated Communications Environment (SLICE) Soldier Radio Waveform (SRW) and the Networked Sensors for the Future Force Advanced Technology Demonstration are part of an effort to develop a common waveform family which will operate across multiple tactical domains including dismounted soldiers, ground sensor, munitions, missiles and robotics. These waveform technologies will ultimately be transitioned to the JTRS library, specifically the Cluster 5 requirement.

  16. retardo de transporte

    Paola Niño-Suárez

    2006-01-01

    Full Text Available En este trabajo se presenta la obtención del modelo exacto en tiempo discreto de un robot móvil tipo (2,0, bajo la consideración de la existencia de retardos de transporte en la señal de control, producidos por la propagación de las señales entre los sensores y actuadores del robot y el control remoto. El modelo obtenido es evaluado mediante simulación, comparando su desempeño con un modelo discreto aproximado que incluye también retardos de transporte y con el modelo en tiempo continuo del mismo sistema.

  17. SERS sensors for DVD platform

    Brøgger, Anna Line

    This Ph.D. thesis explores the engineering of a portable sensor system for detection of rare and small molecules. The Ph.D. project is part of the research project 'Multi-Sensor DVD platform' (MUSE), aiming to integrate different sensors on a rotating disc. The sensors are chosen to complement each...... other, creating more reliable and stable results for the end user. The rotating disc comprises microfluidic channels, which can be utilized for handling and manipulating liquid samples such as blood or water. The focus of this Ph.D. thesis, is on the integration of one specific sensor on a rotating disc....... The sensor is based upon surface enhanced Raman spectroscopy (SERS), which detects molecular vibrations. The aim of this thesis is to cover the different aspects of the sensor system. SERS substrates, consisting of nanopillars with gold or silver caps on top, have been fabricated by standard micro and nano...

  18. Microfabricated Chemical Gas Sensors and Sensor Arrays for Aerospace Applications

    Hunter, Gary W.

    2005-01-01

    Aerospace applications require the development of chemical sensors with capabilities beyond those of commercially available sensors. In particular, factors such as minimal sensor size, weight, and power consumption are particularly important. Development areas which have potential aerospace applications include launch vehicle leak detection, engine health monitoring, and fire detection. Sensor development for these applications is based on progress in three types of technology: 1) Micromachining and microfabrication (Microsystem) technology to fabricate miniaturized sensors; 2) The use of nanocrystalline materials to develop sensors with improved stability combined with higher sensitivity; 3) The development of high temperature semiconductors, especially silicon carbide. This presentation discusses the needs of space applications as well as the point-contact sensor technology and sensor arrays being developed to address these needs. Sensors to measure hydrogen, hydrocarbons, nitrogen oxides (NO,), carbon monoxide, oxygen, and carbon dioxide are being developed as well as arrays for leak, fire, and emissions detection. Demonstrations of the technology will also be discussed. It is concluded that microfabricated sensor technology has significant potential for use in a range of aerospace applications.

  19. Reputation-based secure sensor localization in wireless sensor networks.

    He, Jingsha; Xu, Jing; Zhu, Xingye; Zhang, Yuqiang; Zhang, Ting; Fu, Wanqing

    2014-01-01

    Location information of sensor nodes in wireless sensor networks (WSNs) is very important, for it makes information that is collected and reported by the sensor nodes spatially meaningful for applications. Since most current sensor localization schemes rely on location information that is provided by beacon nodes for the regular sensor nodes to locate themselves, the accuracy of localization depends on the accuracy of location information from the beacon nodes. Therefore, the security and reliability of the beacon nodes become critical in the localization of regular sensor nodes. In this paper, we propose a reputation-based security scheme for sensor localization to improve the security and the accuracy of sensor localization in hostile or untrusted environments. In our proposed scheme, the reputation of each beacon node is evaluated based on a reputation evaluation model so that regular sensor nodes can get credible location information from highly reputable beacon nodes to accomplish localization. We also perform a set of simulation experiments to demonstrate the effectiveness of the proposed reputation-based security scheme. And our simulation results show that the proposed security scheme can enhance the security and, hence, improve the accuracy of sensor localization in hostile or untrusted environments.

  20. Single Nanoparticle Plasmonic Sensors

    Manish Sriram

    2015-10-01

    Full Text Available The adoption of plasmonic nanomaterials in optical sensors, coupled with the advances in detection techniques, has opened the way for biosensing with single plasmonic particles. Single nanoparticle sensors offer the potential to analyse biochemical interactions at a single-molecule level, thereby allowing us to capture even more information than ensemble measurements. We introduce the concepts behind single nanoparticle sensing and how the localised surface plasmon resonances of these nanoparticles are dependent upon their materials, shape and size. Then we outline the different synthetic approaches, like citrate reduction, seed-mediated and seedless growth, that enable the synthesis of gold and silver nanospheres, nanorods, nanostars, nanoprisms and other nanostructures with tunable sizes. Further, we go into the aspects related to purification and functionalisation of nanoparticles, prior to the fabrication of sensing surfaces. Finally, the recent developments in single nanoparticle detection, spectroscopy and sensing applications are discussed.

  1. Obtención de Si3N4 mediante SHS

    Rodríguez, M. A.

    2003-04-01

    parámetros que definen la propia reacción. Con la información obtenida se propone el mecanismo predominante de la síntesis del Nitruro de Silicio mediante SHS.

  2. Efecto del argon en películas CNxHy depositadas mediante ECR-CVD

    Albella, J. M.

    2004-04-01

    Full Text Available Carbon nitride films have been deposited by ECR-CVD, from Ar/CH4/N2 gas mixtures with different methane concentrations. Infrared Spectroscopy (IRS and Elastic Recoil Detection Analysis (ERDA have been used for films characterisation and Optical Emission Spectroscopy (OES for plasma analysis. Argon concentration in the gas mixture controls the growth rate as well as the composition of the film. In the proposed model, argon plays a key role in the activation of methane molecules. Also, during the growth of the film, two processes may be considered: i Film formation and ii Etching of the growing surface. Changing the gas mixture composition affects both processes, which results in films with different composition and structure as well as different deposition rates.Se ha estudiado el efecto del argon durante el proceso de CVD asistido por un plasma ECR para la síntesis de películas de nitruro de carbono (CNxHy a partir de mezclas gaseosas Ar/CH4/N2 con diferente contenido de metano. Las películas depositadas han sido analizadas mediante espectroscopía infrarroja (IRS y ERDA (Elastic Recoil Detection Analysis, y el análisis del plasma ha sido realizado utilizando la técnica de espectroscopía de emisión óptica (OES. La velocidad de deposición y la composición de las películas depositadas se encuentran determinadas por la concentración de argon en la mezcla gaseosa. Se propone un modelo, según el cual el argon juega un papel fundamental como activador de las moléculas de metano. El modelo propuesto incluye dos procesos simultáneos durante el crecimiento de las capas : i formación de la capa y ii ataque de la superficie de crecimiento. Según la composición de la mezcla gaseosa se favorece uno u otro proceso, lo que conduce a velocidades de deposición diferentes así como a depósitos con diferente composición y estructura atómica.

  3. Standardizzazione isogravitá di un case-mix ospedaliero mediante Charlson index

    G. Messina

    2003-05-01

    Full Text Available

    Introduzione: la comorbidità è un importante fattore confondente negli studi epidemiologici valutativi dell’assistenza ospedaliera. Diversi strumenti di risk adjustment misurano la complessità della malattia, consentendo di correlarla al consumo di risorse assistenziali, agli esiti, nonchè di confrontare studi eseguiti in tempi e realtà diversi.

    Obiettivi: - Standardizzare per complessità casistica la mortalità dei pazienti assistiti da un grande ospedale; - Identificare le variabili in grado di migliorare la capacità predittiva di mortalità intraospedaliera (IM. Materiali e

    Metodi: sono state analizzate 40.801 schede di dimissione prodotte dal Policlinico Senese nel 2001. Sono stati studiati i tassi di IM specifici per Charlson Index Score (CSI: quest’ultimo considera 19 categorie di patologia e si basa sull’ ICD-IX-CM. Le variabili studiate mediante analisi bivariate e regressione logistica, sono state: CSI (codificato in 5 livelli 0, 1, 2, 3, 4, lunghezza del ricovero (LR, sesso ed età. Risultati: CSI è risultato associato con IM (p‹0.001. Sesso, età e LR sono risultati associati sia con CSI (p‹0.001 che IM (p‹0.001. Confrontando i 4 livelli di CSI con quello di riferimento (0, le seguenti Odds Ratio (OR di IM sono state trovate: Livello 1 verso livello 0 OR: 6.79 (p‹0.001, Livello 2 verso livello 0 OR: 15.8 (p‹0.001, Livello 3 verso livello 0 OR: 9.36 (p‹0.001, Livello 4 verso livello 0 OR: 7.4 (p‹0.001. La variabile sesso non è risultata aver un effetto confondente tra CSI e IM al contrario delle variabili LR ed età.

    Conclusioni: il CSI aiuta a valutare (predire il rischio di mortalità intraospedaliera, sebbene in modo non lineare. Abbiamo sempre rilevato valori più alti di mortalità confrontando i livelli 1, 2, 3, e 4 con quello di riferimento (0. In particolare il valore più alto lo ha raggiunto il secondo livello

  4. EDUCACIÓN MEDIANTE ENCICLOPEDIAS VISUALES TEMÁTICAS: INTYPEDIA UN CASO DE ÉXITO

    ALFONSO MUÑOZ MUÑOZ

    2013-01-01

    Full Text Available La presente investigación recoge una experiencia de innovación educativa que demuestra la utilidad de las enciclopedias visuales temáticas para la formación académica a través de Internet. Los objetivos de esta experiencia recaen en verificar si es posible crear enciclopedias visuales temáticas que mediante recursos audiovisuales permitan el aprendizaje de aspectos complejos de una manera asequible. Con el interés de obtener datos que permitan comprobar la idoneidad de este tipo de recursos formativos, se construye una enciclopedia visual temática centrada en aspectos de la seguridad de la información y protección de las comunicaciones digitales. Para el diseño de esta enciclopedia se considera una metodología de diseño basada en la definición de una temática de interés, tipo de aprendizaje, formato y calidad de las unidades temáticas, difusión y coste, etc. Esta enciclopedia visual, el proyecto Intypedia, novedoso a escala mundial, está compuesta por lecciones en vídeo de unos 12 minutos y material docente complementario. El lenguaje utilizado permite el correcto seguimiento de las lecciones tanto a expertos en seguridad como internautas en general. Por tanto, la calidad y claridad de estos contenidos se convierten en un valor añadido del proyecto. Los resultados derivados reflejan la utilidad de Intypedia. En 2 años de vida la enciclopedia recibe miles de visitas al mes y se ha convertido en una enciclopedia de referencia en Iberoamérica y en las redes sociales en las que está presente. Algunos de los resultados más importantes son: 232.786 reproducciones únicas de las lecciones, siendo los consumidores principalmente internautas, profesionales y técnicos de España, Iberoamérica y EE.UU.; más de 176.000 documentos descargados, en torno a los 2.100 seguidores uniendo las redes sociales y una visibilidad en Google con más de 40.000 entradas que enlazan al proyecto.

  5. Identificación de territorios críticos en salud materna mediante indicadores

    Marcos Paz Ballivián

    2002-07-01

    Full Text Available Objetivos. El Ministerio de Salud y Previsión Social de Bolivia convocó a principios de 2000 a varios expertos para que, a partir de la información disponible, elaboraran un método que permitiera identificar territorios críticos en un tema de por sí prioritario --la salud materna y neonatal-- y crear un mapa de la situación y de la capacidad instalada en las 112 provincias nacionales. En este estudio se describe el método utilizado. Métodos. Se crearon índices de la situación de salud y de la capacidad instalada. Los pasos seguidos en este proceso fueron los siguientes: 1 identificación de las variables incluidas en cada índice; 2 ponderación de las variables de cada índice; creación de una fórmula para cada índice; 4 elaboración de una planilla con los datos de cada provincia correspondientes a las variables elegidas y al valor porcentual provincial de cada índice, obtenido mediante la aplicación de la respectiva fórmula; 5 identificación de tres categorías continuas para cada índice, y 6 definición de la taxonomía. Resultados. De este modo, se obtuvo un mapa nacional de la situación de salud materna y de la capacidad instalada en cada una de las 112 provincias bolivianas, lo cual permitió seleccionar un número mínimo de provincias para realizar intervenciones conjuntas entre el Ministerio de Salud y Previsión Social y otras instituciones. Las 9 provincias seleccionadas tienen un total de 26 municipios que implican a 17 distritos sanitarios y concentran el 29% de la población del país, el 33% de las muertes maternas y el 35% de las defunciones neonatales tempranas estimadas. Conclusiones. Basándose en información disponible, el método utilizado proporcionó un mapa de la situación global, en este caso de la salud materna, de las 112 provincias de los 9 departamentos bolivianos que permite identificar territorios críticos para las intervenciones en materia de salud.

  6. Air pollution biomonitoring using terrestrial mosses; Il biomonitoraggio di pollutanti nell`aria mediante i muschi

    Cenci, R. M. [C.C.R. Ispra, Istituto dell`Ambiente, La Spezia (Italy); Palmieri, F.; Mousty, F. [U.S.L. n.5, La Spezia (Italy)

    1998-06-01

    The spatial-temporal concentration of elements harmful for life has been investigated using terrestrial mosses of the Hypnum cupressiforme species. The results obtained have been implemented with elements of soil collected in the same area, for a wider information. Concerning the mosses, the investigated elements are: Al, As, Cd, Co, Cr, Fe, Mn, Pb, Cu, Ti, V, and Zn. The elements investigated on soil samples, collected only once, are: As, Cd, Cr, Mn, Ni, Cu and Pb. The results obtained allowed to identify an area of about 100 Kmq, located North-West with regard to La Spezia city (Italy), where the concentrations are higher than the remaining area. In the smaller investigation area, a surface of 0,12 kmq was found where the fall out rate for Pb is 0,21 g m-2 y-1, a value three times greater than the maximal european value tested in Rumania area (Ruehling, 1994). Mosses, which are highly efficient indicators of atmospheric pollution, have permitted to identify anthropogenic polluted areas and to evaluate the fall out rate. [Italiano] Mediante l`utilizzo del muschio appartenente alla specie Hypnum cupressiforme e` stata valutata la distribuzione nello spazio e nel tempo della concentrazione di elementi dannosi per la salute dell`uomo. I dati raccolti sono stati ampliati analizzando campioni di suolo raccolti nelle medesime localita`. Complessivamente sono state approntate 32 stazioni. Dopo il posizionamento i talli di muschio venivano raccolti per tre volte con cadenza quadrimestrale. per quanto riguarda i muschi sono state integrate le concentrazioni dei seguenti elementi: Al, As, Cd, Co, Cr, Fe, Mn, Pb, Cu, Ti, V, e Zn. Nei suoli, raccolti una sola volta, l`elenco degli elementi e` stato il seguente: As, Cd, Cr, Mn, Ni, Cu e Pb. I risultati ottenuti hanno permesso l`identificazione di un`area di circa 100 kmq posta a Nord-Ovest della citta` di La Spezia, dove le concentrazioni di As, Co, Ni, Cu, Ti e V sono superiori rispetto alla restante area. Nella piccola area

  7. Intelligent Wireless Sensor Network

    Saeed, Bakhtiar I.; Mehrdadi, Bruce

    2010-01-01

    In recent years, there has been significant increase in utilisation of embedded-microcontrollers in broad range of applications extending from commercial products to industrial process system monitoring. Furthermore, improvements in speed, size and power consumption of microcontrollers with added wireless capabilities has provided new generation of applications. These include versatile and\\ud low cost solutions in wireless sensor networking applications such as wireless system monitoring and ...

  8. Vehicle Based Vector Sensor

    2015-09-28

    buoyant underwater vehicle with an interior space in which a length of said underwater vehicle is equal to one tenth of the acoustic wavelength...underwater vehicle with an interior space in which a length of said underwater vehicle is equal to one tenth of the acoustic wavelength; an...unmanned underwater vehicle that can function as an acoustic vector sensor. (2) Description of the Prior Art [0004] It is known that a propagating

  9. Wearable wireless photoplethysmography sensors

    Spigulis, Janis; Erts, Renars; Nikiforovs, Vladimirs; Kviesis-Kipge, Edgars

    2008-04-01

    Wearable health monitoring sensors may support early detection of abnormal conditions and prevention of their consequences. Recent designs of three wireless photoplethysmography monitoring devices embedded in hat, glove and sock, and connected to PC or mobile phone by means of the Bluetooth technology, are described. First results of distant monitoring of heart rate and pulse wave transit time using the newly developed devices are presented.

  10. Microparticle Flow Sensor

    Morrison, Dennis R.

    2005-01-01

    The microparticle flow sensor (MFS) is a system for identifying and counting microscopic particles entrained in a flowing liquid. The MFS includes a transparent, optoelectronically instrumented laminar-flow chamber (see figure) and a computer for processing instrument-readout data. The MFS could be used to count microparticles (including micro-organisms) in diverse applications -- for example, production of microcapsules, treatment of wastewater, pumping of industrial chemicals, and identification of ownership of liquid products.

  11. Permalloy GMI sensor

    Ripka, P.; Platil, A.; Kaspar, P.; Tipek, A.; Malatek, M.; Kraus, Luděk

    254-255, - (2003), s. 633-635 ISSN 0304-8853. [Soft Magnetic Material Conference ( SMM 15). Bilbao, 05.09.2001-07.09.2001] R&D Projects: GA MŠk ME 355 Grant - others:HPMF-CT-2000(XE) 00695 Institutional research plan: CEZ:AV0Z1010914 Keywords : magnetic sensors * GMI effect * magnetometer Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.910, year: 2003

  12. Análisis y Control de Sensores y Actuadores mediante la tarjeta de desarrollo EasyPIC Pro v7

    Encinas Elvira, Alberto

    2014-01-01

    En el proyecto descrito a continuación se va a realizar un programa para controlar una casa familiar domótica de una única planta con jardines. Para realizarlo se ha empleado un microcontrolador que se encargará de medir la temperatura interior y exterior de la casa, controlar el encendido y apagado de la calefacción en función de una serie de parámetros que programe el usuario (como la temperatura deseada o el coste máximo al mes que desea), controla el riego de hasta dos jardines separad...

  13. Sistema de monitorización mediante sensores en tiempo real de cultivos utilizando bases de datos no relacionales e inteligencia artificial

    El Mardi, Hind

    2016-01-01

    El trabajo que se muestra en este proyecto tiene su génesis en la observación de una necesidad planteada en el sector agroalimentario a nivel mundial y, más concretamente, en el sector primario de la agricultura. La agricultura, desde el punto de vista de la alimentación, es uno de los sectores clave para el desarrollo, no solo de los países, sino del propio equilibrio humano y medioambiental en el mundo. Este sector básico para la sociedad, puesto que supone la parte esencial de la alimen...

  14. Monitoreo de tráfico vehicular en sistemas V2I mediante el uso de una red inalámbrica de sensores

    Mario A. Ramirez Reyna; Mario E. Rivero Ángeles; Iclia Villordo Jimenez

    2014-01-01

    En un futuro cercano la mayoría de los sistemas automotores confiarán fuertemente en el intercambio de información entre vehículos o a la infraestructura, para mejorar las condiciones de manejo, incrementar la seguridad o simplemente intercambiar información entre los usuarios. Esta es la razón por la cual hoy en día la investigación y desarrollo de una Red Ad-Hoc Vehicular es muy importante. En este documento se presenta un diseño y análisis de una Red Ad-Hoc Vehicular (VAN...

  15. Control de calidad y seguridad de la carne y productos cárnicos curados mediante el uso de sensores enzimáticos

    HERNÁNDEZ CÁZARES, ALEIDA SELENE

    2011-01-01

    Inmediatamente después del sacrificio del animal, se inician en la carne un gran número de cambios bioquímicos que son críticos para definir el desarrollo de la calidad. La evaluación de algunos metabolitos derivados de estos procesos ha sido propuesta como método rápido y simple para determinar la calidad de la carne y de los productos cárnicos. Actualmente, la técnica más utilizada en la detección de estos compuestos es la cromatografía líquida de alta resolución (HPLC). Sin embargo, el cre...

  16. Monitoreo de tráfico vehicular en sistemas V2I mediante el uso de una red inalámbrica de sensores

    Mario A. Ramirez Reyna

    2014-01-01

    reporte de eventos. En el primero, la información del tráfico es transmitida exclusivamente entre los nodos en la WSN, mientras que el segundo método hace uso de los vehículos para retransmitir la información al concentrador. Los métodos propuestos son analizados en términos del consumo de energía y retardo promedio de reporte.

  17. Análisis del campo sonoro y la molestia de la contaminación acústica en ciudades mediante el uso de redes de sensores.

    Noriega Linares, Juan Emilio

    2017-01-01

    En la constante evolución en la que viven las ciudades actuales, la preocupación por la contaminación acústica y la concienciación sobre el ruido se han incrementado en los últimos años. El aumento de los niveles de contaminación acústica ha hecho que se ponga más atención en el ruido y sus efectos en las personas, y cómo éstas pueden estar de afectadas, ya no de manera directa con problemas de salud, pero sí en cómo el ruido afecta más subjetivamente de una manera negativa en la calidad de v...

  18. Piezoelectric cantilever sensors

    Shih, Wan Y. (Inventor); Shih, Wei-Heng (Inventor); Shen, Zuyan (Inventor)

    2008-01-01

    A piezoelectric cantilever with a non-piezoelectric, or piezoelectric tip useful as mass and viscosity sensors. The change in the cantilever mass can be accurately quantified by monitoring a resonance frequency shift of the cantilever. For bio-detection, antibodies or other specific receptors of target antigens may be immobilized on the cantilever surface, preferably on the non-piezoelectric tip. For chemical detection, high surface-area selective absorbent materials are coated on the cantilever tip. Binding of the target antigens or analytes to the cantilever surface increases the cantilever mass. Detection of target antigens or analytes is achieved by monitoring the cantilever's resonance frequency and determining the resonance frequency shift that is due to the mass of the adsorbed target antigens on the cantilever surface. The use of a piezoelectric unimorph cantilever allows both electrical actuation and electrical sensing. Incorporating a non-piezoelectric tip (14) enhances the sensitivity of the sensor. In addition, the piezoelectric cantilever can withstand damping in highly viscous liquids and can be used as a viscosity sensor in wide viscosity range.

  19. Flexible piezotronic strain sensor.

    Zhou, Jun; Gu, Yudong; Fei, Peng; Mai, Wenjie; Gao, Yifan; Yang, Rusen; Bao, Gang; Wang, Zhong Lin

    2008-09-01

    Strain sensors based on individual ZnO piezoelectric fine-wires (PFWs; nanowires, microwires) have been fabricated by a simple, reliable, and cost-effective technique. The electromechanical sensor device consists of a single electrically connected PFW that is placed on the outer surface of a flexible polystyrene (PS) substrate and bonded at its two ends. The entire device is fully packaged by a polydimethylsiloxane (PDMS) thin layer. The PFW has Schottky contacts at its two ends but with distinctly different barrier heights. The I- V characteristic is highly sensitive to strain mainly due to the change in Schottky barrier height (SBH), which scales linear with strain. The change in SBH is suggested owing to the strain induced band structure change and piezoelectric effect. The experimental data can be well-described by the thermionic emission-diffusion model. A gauge factor of as high as 1250 has been demonstrated, which is 25% higher than the best gauge factor demonstrated for carbon nanotubes. The strain sensor developed here has applications in strain and stress measurements in cell biology, biomedical sciences, MEMS devices, structure monitoring, and more.

  20. Thermosensitive gas flow sensor

    Berlicki, T.; Osadnik, S.; Prociow, E.

    1997-01-01

    Results of investigations on thermal gas flow sensor have been presented. The sensor consists of three thin film resistors Si+Ta. The circuit was designed in the form of two bridges; one of them serves for measurement of the heater temperature, the second one for the measurement of temperature difference of peripheral resistors. The measurement of output voltage versus the rate of nitrogen flow at various power levels dissipated at the heater and various temperatures have been made. The measurements were carried out in three versions; (a) at constant temperature of the heater, (b) at constant power dissipated in the heater, controlled by the power of the heater, (c) at constant temperature of the heater controlled by the power dissipated in the peripheral resistors of the sensor. Due to measurement range it is advantageous to stabilize the temperature of the heater, especially by means of the power supplied to the peripheral resistors. In this case the wider measurement range can be obtained. (author)

  1. Control de una antena sensora mediante la técnica de Input Shaping no lineal

    Daniel Feliu-Talegon

    2016-04-01

    Full Text Available Resumen: En la actualidad se usan barras flexibles junto a sensores de fuerza y par para detectar obstáculos en robótica móvil. Además se utilizan estos dispositivos para la detección de superficies y el reconocimiento de objetos. Estos dispositivos, llamados antenas sensoras, representan una estrategia de detección activa en la cual un sistema con servomotores mueve la antena hasta que golpea con un objeto. En ese instante, la información obtenida de los ángulos de los motores y la medida de los sensores de fuerza y par permiten saber la posición del punto de impacto con el objeto y suministran información valiosa sobre su superficie. Para mover la antena de manera rápida y precisa, este artículo propone un nuevo sistema de control en cadena abierta. La estrategia de control para reducir las vibraciones de la antena está basada en la técnica Input Shaping (IS. La antena realiza movimientos libres tanto azimutales como cenitales. Sin embargo, el movimiento cenital es claramente no lineal debido al efecto de la gravedad, el cual previene el uso de técnicas IS lineales. Por tanto, en este artículo se desarrolla un nuevo IS no lineal que tiene en cuenta el término de la gravedad. Los experimentos muestran la mejora en la reducción de la vibración del extremo para movimientos libres de la antena gracias a la técnica propuesta. Abstract: Flexible links combined with force and torque sensors can be used to detect obstacles in mobile robotics, as well as for surface and object recognition. These devices, called sensing antennae, perform an active sensing strategy in which a servomotor system moves the link back and forth until it hits an object. At this instant, information of the motor angles combined with force and torque measurements allow calculating the positions of the hitting points, which are valuable information about the object surface. In order to move the antenna fast and accurately, this article proposes a new open loop

  2. Diagnose nutricional com o uso de sensor óptico ativo em algodoeiro Nutritional diagnosis with the use of active optical sensor in cotton

    Anamari V. de A. Motomiya

    2012-11-01

    Full Text Available Este trabalho objetivou avaliar a resposta espectral do dossel de plantas à variação de doses de nitrogênio (N e sua relação com os teores foliares de N, índice de clorofila e produtividade na cultura do algodoeiro. O experimento foi conduzido em Chapadão do Sul, MS, no delineamento em blocos casualizados, com quatro repetições. Os tratamentos consistiram de cinco doses de N: 0, 30, 70, 110 e 150 kg ha-1, divididas em duas aplicações aos 28 e 41 dias após a emergência utilizando-se, como fonte, o fertilizante ureia. As maiores correlações dos índices de clorofila e do índice de vegetação por diferença normalizada com a produtividade foram observadas na quarta leitura, aos 56 dias após a emergência, indicando que neste período a produtividade já pode estar comprometida caso haja falhas no suprimento de N à cultura. Os resultados obtidos indicaram que o sensor se torna mais sensível à variação do teor foliar de N conforme a planta se desenvolve mas não quando ela atinge um alto índice de área foliar e começa a entrar em senescência. Concluiu-se, então, que o sensoriamento remoto ao nível terrestre permite estimar indiretamente a quantidade de N absorvido, o índice de clorofila e a produtividade do algodoeiro.This research aimed to evaluate the spectral response to variation of nitrogen levels and its relationship with leaf nitrogen, chlorophyll and yield in cotton crop. The experiment was conducted in Chapadão do Céu, MS, in a randomized block design with four replications. The treatments consisted of five N rates of 0, 30, 70, 110 and 150 kg ha-1, divided in two applications at 28 and 41 days after emergence, using urea fertilizer as a source. The highest correlations of the chlorophyll index and normalized difference vegetation index with yield were observed in the fourth observation, at 56 days after emergence, indicating that in this period, yield may already be compromised if there is shortage in the

  3. Síntesis de nitruro de titanio mediante láser y energía solar concentrada

    García, I.

    1998-04-01

    Full Text Available The possibility of the employment of solar energy concentrated by Fresnel lens is investigated in order to synthesize materials by gas-solid reaction. These first results are compared by two similar techniques as high power laser and xenon are lamp. The TiN coatings obtained with xenon are lamp and Fresnel lens are homogenous, without pores or defects, with a uniform thickness of about 6 μm for treatments of 2 min. The good quality of the TiN coating for all the testing conditions was confirmed by the x-ray diffraction measurements.

    Se presenta la utilización de la energía solar concentrada mediante lentes de Fresnel para la síntesis de materiales por reacción gas-sólido. Estos primeros resultados sobre nitruración superficial de titanio y aleaciones de titanio se comparan con los obtenidos con técnicas similares como el láser de alta potencia y la lámpara de descarga de xenón. Las capas de nitruro de titanio obtenidas mediante energía solar concentrada por lentes de Fresnel y lámpara de xenón son homogéneas, sin grietas ni defectos, y con un espesor uniforme de 6 μm en tiempos de sólo 2 min. La buena calidad de estas capas se confirma mediante difracción de rayos X.

  4. Porous Silicon Sensors- Elusive and Erudite

    H. Saha, Prof.

    2017-01-01

    Porous Silicon Sensors have been fabricated and tested successfully over the last few years as humidity sensors, vapour sensors, gas sensors, piezoresistive pressure sensors and bio- sensors. In each case it has displayed remarkably sensitivity, relatively low temperature operation and ease of fabrication. Brief description of fabrication and properties of all these types of different sensors is reported in this paper. The barriers of porous silicon like contact, non- uniformity, instability ...

  5. Análisis del yeso empleado en revestimientos exteriores mediante técnicas geológicas

    Sanz Arauz, David

    2011-01-01

    El presente trabajo se centra en el yeso fabricado en hornos tradicionales y empleado históricamente para la ejecución de revestimientos exteriores. Para ello se realiza un estudio documental y un trabajo experimental mediante técnicas geológicas. En el estudio documental se ha pasado revisión a la historia del yeso como material de construcción con especial atención a su empleo en revestimientos exteriores, desde la antigüedad hasta mitad del siglo XX, momento en el que la industrializaci...

  6. Estudio de la microestructura femoral de pacientes con coxartrosis y con fractura de cadera mediante micro-TAC

    Sainz-Aja Guerra, J.A.; Alonso, M.A.; Ferreño Blanco, D.; Pérez-Núñez, M.I.; Ruiz Martínez, E.; García-Ibarbia, C.; Casado del Prado, J.A.; Gutiérrez-Solana, F.; Riancho, J.A.

    2016-01-01

    La disminución de la densidad mineral ósea (DMO), es decir, del volumen de tejido óseo por unidad de volumen del esqueleto, es característica de la osteoporosis, mientras que se ha sugerido que la artrosis se acompaña de un aumento de la DMO a nivel local y sistémico. Para comprobar esta hipótesis analizamos mediante microTAC el hueso trabecular de la cabeza femoral de 10 pacientes con fractura de cadera y 9 con coxartrosis. El análisis no reveló diferencias significativas entre ambos grupos ...

  7. Estudio de una celda de fabricación flexible mediante la simulación de eventos discretos

    Sanz Lucero, Flavia

    2014-01-01

    En la actualidad las fábricas se ven afectadas por la alta competencia tanto nacional como internacional, y obligadas a mejorar sus procesos productivos para poder continuar siendo competitivas en un mercado cada vez más hostil. El presente proyecto trata de resolver una parte importante de esta mejora: la reducción de los tiempos improductivos o muertos, mediante la búsqueda de una secuencia óptima de alimentación en una celda de fabricación flexible compuesta por máquinas ali...

  8. Reducción de percloroetileno y cromo hexavalente mediante FE(0) y bioestimulación de microorganismos anaerobios

    VÁZQUEZ MORILLAS, Alethia; VACA MIER, Mabel; BELTRÁN VILLAVICENCIO, Margarita; LÓPEZ CALLEJAS, Raymundo; ÁLVAREZ, Pedro J

    2007-01-01

    En este trabajo se estudiaron las interacciones Fe-microorganismos simulando el entorno de una barrera reactiva permeable (BRP), para la reducción de percloroetileno (PCE) y cromo hexavalente en acuíferos contaminados. La bioestimulación de los microorganismos se llevó a cabo mediante la adición de un cosustrato para el desarrollo de las comunidades microbianas presentes de manera natural en el suelo. Se empleó un compuesto comercial que libera hidrógeno (HRC, por sus siglas en inglés) a tasa...

  9. Estudio de aleaciones amorfas Hf1-x Cux mediante correlaciones angulares perturbadas

    Damonte, Laura Cristina

    1988-01-01

    Con la intención de contribuir a un mejor entendimiento de la estructura atómica local en aleaciones del tipo MT-MT, en este trabajo de tesis se realiza un estudio, mediante la aplicación de la técnica TDPAC, sobre aleaciones amorfas Hf1-x Cux (x=0.33, 0.44, 0.50, 0.59) y sus contrapartes cristalinas. Muy pocos trabajos han sido publicados sobre este sistema. El objetivo general de este trabajo es analizar el orden local en estas aleaciones, su evolución con tratamientos térmicos (r...

  10. Protocolo para la producción de plantas dihaploides de trigo duro mediante cruzamientos con maíz

    García Llamas, Carmen

    2011-01-01

    El objetivo de este trabajo ha sido desarrollar un protocolo para producir plantas dihaploides de trigo duro, mediante cruzamientos con maíz, que permita acortar la duración de los programas de mejora de esta especie. Entre las variantes de este método se ha elegido el cultivo de tallos cortados, porque permite controlar las condiciones ambientales durante el desarrollo de los embriones y abaratar los costes de aplicación de las hormonas. Se han abordado y mejorado tres aspectos de esta técni...

  11. Refuerzo de puentes por cambio de esquema estructural: optimización mediante algoritmo genético

    Valenzuela, Matías A.; Casas Rius, Joan Ramon

    2011-01-01

    La presente comunicación entrega un estudio detallado del proceso constructivo y de tesado para el refuerzo de puentes con tipología longitudinal de vigas continuas convirtiéndolos en puentes en arco atirantado (tipo network). Se presentan las etapas básicas propuestas en aspectos de construcción, se establecen las hipótesis del estudio de tesado e implementa el método de tesado a partir de la optimización automatizada mediante algoritmos genéticos, definiendo criterios como: variables de ...

  12. Tratamiento de las osteitis diafisarias de tibia mediante sinostosis tibioperonea y resección ósea

    Fernández Sabaté, Alfons; Riu Labrador, R.; Moreta Munujos, D.; Cáceres Palou, Enrique

    1984-01-01

    El tratamiento de las osteítis crónicas de la diáfisis tibial obliga a menudo a practicar una amplia resección para alcanzar el tejido óseo sano y esta exigencia operatoria debilita la diáfisis. Para obviar la fractura operatoria o posterior por fatiga y para facilitar la resección sin temor se ha utilizado una táctica quirúrgica consistente en una solidarización tibioperonea que construye un residente eje en la pierna ya sea mediante injerto intertibioperoneo ya con peroné protibia de Zanoli...

  13. Sistema “Gestor Fiducia Fondos JEE” Mediante Servicios de Cloud Computing, Estudio de Factibilidad e Implementación

    Unda, Priscila; Coral, Henry; Marcillo, Diego

    2016-01-01

    Este proyecto presenta el estudio de factibilidad y el diseño e implementación del sistema “Gestor Fiducia Fondos JEE”, mediante servicios en la nube computacional. Para llevarlo a cabo, se realizó una evaluación técnica de tres importantes proveedores de nubes computacionales Amazon Ec2, Rackspace, y Terremark, valorando la calidad del soporte, costos, escalabilidad y usabilidad. Posteriormente, se realizó el diseño y definición de una infraestructura básica, media y superior que permita alb...

  14. Segmentación automática de noticias mediante procesamiento de formas prosódicas

    Mas Manchón, Lluís

    2014-01-01

    La segmentación automatizada de noticias en tiempo real es un problema que ha tenido un abordaje fundamentalmente lingüístico y de procesamiento de la señal en los últimos años. El trabajo que presentamos tiene un enfoque sustancialmente diferente: desde una perspectiva comunicológica, se toman las formas prosódicas típicas del discurso informativo y se intentan programar mediante el procesamiento cepstrum en el entorno Labview. Después de numerosas pruebas se fijan los diferentes parámetros ...

  15. Generación de escenarios de planificación de redes mediante técnicas OLAP

    Ramos García, Jesús

    2015-01-01

    RESUMEN: Debido a la gran cantidad de datos que a veces se tienen que manejar, es necesario el uso de herramientas que se encarguen de almacenar, reducir, extraer, analizar, procesar o modificar dichos datos de la forma más rápida y sencilla posible. Las bases de datos multidimensionales, con el nombre de cubo OLAP (On-Line Analytical Processing) se encargan de representar la información elegida de forma multidimensional, es decir, mediante cubos de varias dimensiones, haciendo que dicha info...

  16. Propuesta de mejora de habilidades sociales en niños con discapacidad intelectual mediante la terapia asistida por animales

    Bermejo Lorenzo, Julia

    2015-01-01

    Este Trabajo de Fin de Grado se centra en la aplicación práctica de un programa de mejora de la Educación Socioemocional, utilizando como herramienta innovadora la Terapia Asistida con Animales de Compañía, aplicándose a un caso real de un alumno con Parálisis Cerebral y Discapacidad Intelectual asociada. Los objetivos de las actividades están centrados en el desarrollo de la autoconciencia, el autocontrol, la conciencia social y la toma de decisiones responsables. Mediante este proyecto se p...

  17. Metodologías de análisis de túneles excavados con tuneladora mediante el programa Plaxis

    Alcahuaman Villanueva, Victor Abner

    2016-01-01

    El programa de elementos finitos Plaxis se ha convertido en una herramienta popular para diseñar y estudiar túneles excavados mediante máquinas tuneladoras. En el caso de túneles urbanos, los movimientos originados en la excavación son de gran importancia, y se ha observado que en función de la metodología de cálculo seguida en Plaxis los resultados pueden ser muy diferentes. La tesina pretende comparar las diversas metodologías disponibles y establecer criterios para su uso en casos reales....

  18. Distinción de especies del género Persea mediante RAPD e ISSR de ADN

    Reyes-Alemán, Juan Carlos; Valadez-Moctezuma, Ernestina; Simuta-Velázco, Lisandro; Barrientos-Priego, Alejandro Facundo; Gallegos-Vázquez, Clemente

    2013-01-01

    Con la finalidad de establecer bases para diferenciar parte de la diversidad genética de Persea y en especial del subgénero Persea resguardado en la colección nacional de germoplasma de aguacate de México, se estudiaron ocho especies (P. americana, P. steyermarkii, P. schiedeana, P. lingue, P. nubigena, P. floccosa, P. cinerascens y P. indica) con marcadores moleculares mediante las técnicas de RAPD e ISSR, donde los productos de PCR fueron separados en geles de acrilamida. Las huellas de ADN...

  19. Análisis comparativo de distintas toolkits para el reconocimiento biométrico de personas mediante voz

    Ruíz, Silvia; Miranda, Ernesto; Herlein, Mauro; Etchart, Graciela; Alvez, Carlos E.

    2017-01-01

    El objetivo de este trabajo es realizar un análisis comparativo de distintas toolkits para el reconocimiento biométrico de personas mediante voz. Hoy en día los sistemas de identificación de personas se han convertido en una necesidad para la sociedad. A medida que avanza la tecnología y la aplicación de la misma en entornos tanto de ocio como de seguridad, la evolución en desarrollo biométrico es muy grande. Los sistemas de identificación o verificación tradicionales (tarjetas o claves) se h...

  20. Generación de experiencias visuales en ciegos mediante estimulación táctil repetitiva

    Tomás Ortiz; Juan M. Santos

    2012-01-01

    Estudios recientes de nuestro laboratorio han establecido que se puede generar una activación estable del córtex visual en ciegos mediante entrenamiento táctil pasivo prolongado. Esta neuroplasticidad cortical se acompaña en un 40% de los participantes invidentes de sensaciones visuales, así como de una mayor rapidez en el reconocimiento táctil de información espacial tales como líneas, iconos o imágenes, y es crucial para su correcta interpretación. Estos hallazgos pueden ser útiles para el ...

  1. Detección de movimiento mediante técnicas radar CW-FM en banda W

    Vargas González, Daniel

    2014-01-01

    Aplicació de diverses tècniques de detecció i localització per detectar moviments amb un radar C2-FM que opera en banda W. [ANGLÈS] Integration of a SAR adquisition system using a FM-CW 94 GHz radar and test the system by different measurement campaigns with the aim of detecting micrometic displacements using a phase analysis of the recived signal [CASTELLÀ[ Integración de un sistema de adquisición SAR mediante el uso de un radar FM-CW a 94 GHz y probar la validez del mencionado sistema...

  2. Recubrimientos metálicos sobre alúmina mediante procesos de reducción autocatalítica

    Gómez de Salazar, J. M.

    2000-10-01

    Full Text Available In this work, a method for obtaining copper coating on alumina is described. One of the main applications for this coating is in the electronic industry, although it can be used as well as interlayer for dissimilar bonding between metals and alumina, both by solid state joining and by active brazing. The optimal activation conditions for the alumina using Ni salts and the influence of the surface preparation on the copper coating characteristic are described. The coating application is based on an autocatalithic reduction method. The influence of the deposition rate on the adherence of the copper coating has been studied as well. A kinetic study was carried out applying gravimetric and electrochemical methods. To obtaining coating with high adherence, it was necessary to apply heat treatments after the metallization process. The main objective of them was to achieve a chemical bond between the alumina substrate and the copper coating by formation of Al-Cu spinels, instead of the single mechanical bond.

    En el presente trabajo se describe un método de obtención de recubrimientos de cobre sobre un cerámico tenaz como es la alúmina. Una de sus principales aplicaciones se encuentra en la industria electrónica, aunque también puede ser empleado como intermediario en la fabricación de uniones disimilares entre un metal y un cerámico mediante técnicas de unión en estado sólido o en soldadura fuerte reactiva. Se describen las condiciones óptimas de activación de la alúmina mediante sales de Ni, y la influencia que posee la preparación superficial de este substrato (Al2O3 sobre las capas de Cu obtenidas. Este proceso se realiza mediante reducción autocatalítica, habiéndose estudiado como influye la velocidad de deposición sobre la adherencia de la capa de cobre. También se realizaron estudios cinéticos del proceso de recubrimiento mediante ensayos gravimétricos y electroquímicos. Con el fin de obtener recubrimientos que

  3. Control estadístico de la calidad de un servicio mediante Gráficas X y R

    Alberto Isaac Pierdant Rodríguez; Jesús Rodríguez Franco

    2009-01-01

    Las empresas y organismos públicos que proporcionan servicios en México no utilizan frecuentemente técnicas cuantitativas para el control de calidad de dicho servicio, por lo que este trabajo representa una propuesta de control de calidad mediante herramientas simples de control estadístico de calidad. Existen diversas técnicas cualitativas y pocas técnicas cuantitativas como las gráficas, que nos permiten determinar si la prestación de un servicio se encuentra bajo control; es decir, verific...

  4. Control de bacteriemia nosocomial pediátrica mediante un programa de cultivo de soluciones parenterales en uso

    Muñoz Juan M.; Macías Alejandro E.; Guerrero Francisco J.; Hernández Isabel; Medina Humberto; Vargas Enrique

    1999-01-01

    OBJETIVO. Dado que Klebsiella, Enterobacter y Serratia se multiplican en soluciones parenterales y son responsables de una elevada proporción de bacteriemias en los hospitales de México, se propone una estrategia de control mediante la vigilancia microbiológica de las soluciones en uso. MATERIAL Y MÉTODOS. Hospital de enseñanza de segundo nivel con 193 camas. Atiende principalmente pacientes de escasos recursos. En 1992 se inició la vigilancia de la esterilidad de las soluciones parenterales ...

  5. Teleoperación de un robot mindstorm mediante técnicas de visión artificial

    Méndez Rodríguez, Eduardo

    2011-01-01

    Las tres partes tratadas son la teleoperacióon (principalmente con comunicaciones mediante bluetooth), la visión arti cial para elementos móviles en tiempo real y proyectos realizados con el Mindstorm NXT. Hay que destacar que en los dos primeros campos hay innumerables aplicaciones debido a que ambos campos siguen hoy en día bajo invetigación en busca de lograr mejoras tecnológicas, también los proyectos con el Mindstorm están creciendo exponencialmente, mayormente debido a...

  6. Programa Antiestrés de Sincronización Cerebral mediante estimulación visual

    Riccardi Sabatier, Yanitza; Caraballo Pons, Isabel; Miyares Cao, Carlos Manuel; Lago Mendoza, Guillermo; Lauzán Álvarez, Efreín

    2014-01-01

    Se presenta un programa computarizado que permite la sincronización de las ondas cerebrales mediante una estimulación visual, a una frecuencia similar a la actividad eléctrica del cerebro en estado de sedación, lo cual favorece la disminución de los niveles de estrés en los pacientes que acuden al Centro de Histoterapia Placentaria para tratar las patologías de Vitiligo, Psoriasis y Alopecia Areata. La aplicación informática fue programada en lenguaje Delphi 7.0 y cuenta con dos módulos para ...

  7. Educación mediante enciclopedias visuales temáticas: INTYPEDIA un caso de éxito.

    Ramió Aguirre, Jorge; Muñoz Muñoz, Alfonso

    2013-01-01

    La presente investigación recoge una experiencia de innovación educativa que demuestra la utilidad de las enciclopedias visuales temáticas para la formación académica a través de Internet. Los objetivos de esta experiencia recaen en verificar si es posible crear enciclopedias visuales temáticas que mediante recursos audiovisuales permitan el aprendizaje de aspectos complejos de una manera asequible. Con el interés de obtener datos que permitan comprobar la idoneidad de este tipo de recursos f...

  8. Análisis del yeso empleado en revestimientos exteriores mediante técnicas geológicas

    Sanz Arauz, David

    2009-01-01

    El presente trabajo se centra en el yeso fabricado en hornos tradicionales y empleado históricamente para la ejecución de revestimientos exteriores. Para ello se realiza un estudio documental y un trabajo experimental mediante técnicas geológicas. En el estudio documental se ha pasado revisión a la historia del yeso como material de construcción con especial atención a su empleo en revestimientos exteriores, desde la antigüedad hasta mitad del siglo XX, momento en el que la industrializaci...

  9. Pronóstico del IPC de la Bolsa Mexicana de Valores Mediante el Uso de Reglas y Redes Neuronales

    Cázares Carrillo, Juan G.

    2004-01-01

    La presente investigación es un esfuerzo para el desarrollo de un pronosticador con resultados aceptables para el mercado de valores destinándose su uso como una herramienta de apoyo a la toma de decisiones financieras. El pronóstico se realiza mediante la identificación de patrones utilizando como herramientas técnicas de Inteligencia Artificial, específicamente Redes Neuronales de Retropropagación y Algoritmos Genéticos. Las principales aportaciones de la presente investigación son: la dete...

  10. Eliminación de contaminantes emergentes en aguas residuales mediante oxidación avanzada con ozono y ultrasonidos

    Abellán Soler, Manuel; Lardín Mifsut, Carlos; Morales Cavero, Eduardo; Pastor Alcañiz, Laura; Martínez Muro, Juan Luis; Santos Asensi, José María; Ibáñez Martínez, María; Hernández Hernández, Félix

    2013-01-01

    Algunos contaminantes emergentes, principalmente fármacos de diferentes clases así como drogas de abuso, pueden estar presentes en las aguas residuales urbanas, no siendo posible su eliminación mediante las técnicas convencionales de depuración. Se ha realizado un estudio en planta piloto en dos estaciones depuradoras de aguas residuales (EDAR), Font de la Pedra (Muro de Alcoy) y Molina de Segura (Murcia), con el fin de determinar la eficacia de eliminación de ciertos ...

  11. Índice para la evaluación de las reflexiones mediante análisis de la onda de pulso radial

    Gustavo J. Meschino

    2008-01-01

    Full Text Available En el presente trabajo se analiza la posibilidad de utilizar un parámetro obtenido del registro de la onda de pulso radial, el ancho de la onda sistólica, que es más sencillo de medir aún que el índice de aumentación radial y que complementaría a este último en la evaluación de la amplitud de la reflexión sistólica, directamente relacionada con el grado de disfunción endotelial y el fenómeno de aumentación aórtica.Se efectuó un estudio poblacional sobre 120 varones normotensos sanos con edades entre 17 y 65 años. Se obtuvo en ellos el registro de la onda de pulso radial en base al registro del movimiento de las paredes de la arteria mediante un sensor capacitivo aplicado sobre la zona de palpación del pulso. Cada registro se procesó y normalizó en amplitud y se calculó el índice de aumentación radial y el ancho de la onda sistólica al 50% de su altura máxima.Se halló que individuos con el mismo índice de aumentación poseían distintos valores de ancho de onda sistólica, lo cual evidencia distintos valores de amplitud de la onda reflejada. Ambos parámetros aumentaron con la edad y su correlación r resultó de 0,9.Se propone la utilización del ancho de la onda sistólica como un índice de envejecimiento alternativo, que permitiría evaluar el sistema arterial cuando la medición del índice de aumentación resultara dificultosa o la comparación entre individuos fuera ambigua.

  12. Deteccion de Chlamydia trachomatis en muestras uretrales mediante inmunofluorescencia directa Detecção de Chlamydia trachomatis em amostras uretrais mediante imunofluorescência direta Detection of Chlamydia trachomatis in urethral samples by means of direct immunofluorescence

    Myra Wilson Schuster

    1989-12-01

    Full Text Available Se estudiaron 82 pacientes con uretritis para la búsqueda de Chlamydia trachomatis mediante inmunofluorescencia directa, Neisscria gonorrhoeae, Mycoplastna y Ureaplasma mediante métodos estándar. Se encontró un 19,5% de Chlamydia trachomatis y en 11 de ellos (68,8% se encontró asociada a otras bacterias y estos pacientes presentó una secreción escasa-gelatinosa.Em 82 doentes com uretrite foi pesquisada a presença de Chlamydia trachomatis, utilizando a prova da imunofluorescência direta, e de Neisseria gonorrhoeae, Mycoplasma e Ureaplasma, utilizando os métodos padrões. Ch. trachomatis foi encontrada em 19,5% dos casos, sendo que em 11 deles (68,8% observou-se associação entre Chlamydia e as outras bactérias pesquisadas. Nesses pacientes observou-se presença de secreção uretral escassa e de aspecto gelatinoso.The presence of Chlamydia trachomatis was studied by the direct immunofluorescence test, as also was that of Neisseria gonorrhoeae, Mycoplasma and Ureaplasma by the standard methods, in 82 patients with urethral discharge. Ch. trachomatis was found in 19.5% (16 of the cases and in 11 of them (68.8% there was association with the other bacteria investigated. This eleven patients presented a scanty gelatinous discharge.

  13. A Piezoelectric Shear Stress Sensor

    Kim, Taeyang; Saini, Aditya; Kim, Jinwook; Gopalarathnam, Ashok; Zhu, Yong; Palmieri, Frank L.; Wohl, Christopher J.; Jiang, Xiaoning

    2016-01-01

    In this paper, a piezoelectric sensor with a floating element was developed for shear stress measurement. The piezoelectric sensor was designed to detect the pure shear stress suppressing effects of normal stress generated from the vortex lift-up by applying opposite poling vectors to the: piezoelectric elements. The sensor was first calibrated in the lab by applying shear forces and it showed high sensitivity to shear stress (=91.3 +/- 2.1 pC/Pa) due to the high piezoelectric coefficients of PMN-33%PT (d31=-1330 pC/N). The sensor also showed almost no sensitivity to normal stress (less than 1.2 pC/Pa) because of the electromechanical symmetry of the device. The usable frequency range of the sensor is 0-800 Hz. Keywords: Piezoelectric sensor, shear stress, floating element, electromechanical symmetry

  14. Low-noise Magnetic Sensors

    Kosel, Jü rgen; Sun, Jian

    2014-01-01

    Magnetic sensors are disclosed, as well as methods for fabricating and using the same. In some embodiments, an EMR effect sensor includes a semiconductor layer. In some embodiments, the EMR effect sensor may include a conductive layer substantially coupled to the semiconductor layer. In some embodiments, the EMR effect sensor may include a voltage lead coupled to the conductive layer. In some embodiments, the voltage lead may be configured to provide a voltage for measurement by a voltage measurement circuit. In some embodiments, the EMR effect sensor may include a second voltage lead coupled to the semiconductor layer. In some embodiments, the second voltage lead may be configured to provide a voltage for measurement by a voltage measurement circuit. Embodiments of a Hall effect sensor having the same or similar structure are also disclosed.

  15. Low-noise Magnetic Sensors

    Kosel, Jurgen

    2014-03-27

    Magnetic sensors are disclosed, as well as methods for fabricating and using the same. In some embodiments, an EMR effect sensor includes a semiconductor layer. In some embodiments, the EMR effect sensor may include a conductive layer substantially coupled to the semiconductor layer. In some embodiments, the EMR effect sensor may include a voltage lead coupled to the conductive layer. In some embodiments, the voltage lead may be configured to provide a voltage for measurement by a voltage measurement circuit. In some embodiments, the EMR effect sensor may include a second voltage lead coupled to the semiconductor layer. In some embodiments, the second voltage lead may be configured to provide a voltage for measurement by a voltage measurement circuit. Embodiments of a Hall effect sensor having the same or similar structure are also disclosed.

  16. OGC® Sensor Web Enablement Standards

    George Percivall

    2006-09-01

    Full Text Available This article provides a high-level overview of and architecture for the Open Geospatial Consortium (OGC standards activities that focus on sensors, sensor networks, and a concept called the “Sensor Web”. This OGC work area is known as Sensor Web Enablement (SWE. This article has been condensed from "OGC® Sensor Web Enablement: Overview And High Level Architecture," an OGC White Paper by Mike Botts, PhD, George Percivall, Carl Reed, PhD, and John Davidson which can be downloaded from http://www.opengeospatial.org/pt/15540. Readers interested in greater technical and architecture detail can download and read the OGC SWE Architecture Discussion Paper titled “The OGC Sensor Web Enablement Architecture” (OGC document 06-021r1, http://www.opengeospatial.org/pt/14140.

  17. -Net Approach to Sensor -Coverage

    Fusco Giordano

    2010-01-01

    Full Text Available Wireless sensors rely on battery power, and in many applications it is difficult or prohibitive to replace them. Hence, in order to prolongate the system's lifetime, some sensors can be kept inactive while others perform all the tasks. In this paper, we study the -coverage problem of activating the minimum number of sensors to ensure that every point in the area is covered by at least sensors. This ensures higher fault tolerance, robustness, and improves many operations, among which position detection and intrusion detection. The -coverage problem is trivially NP-complete, and hence we can only provide approximation algorithms. In this paper, we present an algorithm based on an extension of the classical -net technique. This method gives an -approximation, where is the number of sensors in an optimal solution. We do not make any particular assumption on the shape of the areas covered by each sensor, besides that they must be closed, connected, and without holes.

  18. Airborne Sensor Thermal Management Solution

    Ng, K. K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-06-03

    The customer wants to outfit aircraft (de Havilland Twin Otter) with optical sensors. In previous product generations the sensor line-of-sight direction was fixed – the sensor’s direction relied on the orientation of the aircraft. The next generation sensor will be packaged in a rotatable turret so that the line-of-sight is reasonably independent of the aircraft’s orientation. This turret will be mounted on a boom protruding from the side of the aircraft. The customer wants to outfit aircraft (de Havilland Twin Otter) with optical sensors. In previous product generations the sensor line-of-sight direction was fixed – the sensor’s direction relied on the orientation of the aircraft. The next generation sensor will be packaged in a rotatable turret so that the line-of-sight is reasonably independent of the aircraft’s orientation. This turret will be mounted on a boom protruding from the side of the aircraft.

  19. Micro-Mechanical Temperature Sensors

    Larsen, Tom

    Temperature is the most frequently measured physical quantity in the world. The field of thermometry is therefore constantly evolving towards better temperature sensors and better temperature measurements. The aim of this Ph.D. project was to improve an existing type of micro-mechanical temperature...... sensor or to develop a new one. Two types of micro-mechanical temperature sensors have been studied: Bilayer cantilevers and string-like beam resonators. Both sensor types utilize thermally generated stress. Bilayer cantilevers are frequently used as temperature sensors at the micro-scale, and the goal....... The reduced sensitivity was due to initial bending of the cantilevers and poor adhesion between the two cantilever materials. No further attempts were made to improve the sensitivity of bilayer cantilevers. The concept of using string-like resonators as temperature sensors has, for the first time, been...

  20. Wearable sensors for health monitoring

    Suciu, George; Butca, Cristina; Ochian, Adelina; Halunga, Simona

    2015-02-01

    In this paper we describe several wearable sensors, designed for monitoring the health condition of the patients, based on an experimental model. Wearable sensors enable long-term continuous physiological monitoring, which is important for the treatment and management of many chronic illnesses, neurological disorders, and mental health issues. The system is based on a wearable sensors network, which is connected to a computer or smartphone. The wearable sensor network integrates several wearable sensors that can measure different parameters such as body temperature, heart rate and carbon monoxide quantity from the air. After the portable sensors measuring parameter values, they are transmitted by microprocessor through the Bluetooth to the application developed on computer or smartphone, to be interpreted.

  1. Metal-clad waveguide sensors

    Skivesen, Nina

    This work concerns planar optical waveguide sensors for biosensing applications, with the focus on deep-probe sensing for micron-scale biological objects like bacteria and whole cells. In the last two decades planar metal-clad waveguides have been brieflyintroduced in the literature applied...... for various biosensing applications, however a thorough study of the sensor configurations has not been presented, but is the main subject of this thesis. Optical sensors are generally well suited for bio-sensing asthey show high sensitivity and give an immediate response for minute changes in the refractive...... index of a sample, due to the high sensitivity of optical bio-sensors detection of non-labeled biological objects can be performed. The majority of opticalsensors presented in the literature and commercially available optical sensors are based on evanescent wave sensing, however most of these sensors...

  2. Sensor Compendium - A Snowmass Whitepaper-

    Artuso, M. [Syracuse Univ., NY (United States); Battaglia, M. [Univ. of California, Santa Cruz, CA (United States); Bolla, G. [Purdue Univ., West Lafayette, IN (United States); Bortoletto, D. [Purdue Univ., West Lafayette, IN (United States); Caberera, B. [Stanford Univ., CA (United States); Carlstrom, J E [Univ. of Chicago, IL (United States); Argonne National Lab. (ANL), Argonne, IL (United States); Chang, C. L. [Univ. of Chicago, IL (United States); Argonne National Lab. (ANL), Argonne, IL (United States); Cooper, W. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Da Via, C. [Univ. of Manchester (United Kingdom); Demarteau, M. [Argonne National Lab. (ANL), Argonne, IL (United States); Fast, J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Frisch, H. [Univ. of Chicago, IL (United States), et al.

    2013-10-01

    Sensors play a key role in detecting both charged particles and photons for all three frontiers in Particle Physics. The signals from an individual sensor that can be used include ionization deposited, phonons created, or light emitted from excitations of the material. The individual sensors are then typically arrayed for detection of individual particles or groups of particles. Mounting of new, ever higher performance experiments, often depend on advances in sensors in a range of performance characteristics. These performance metrics can include position resolution for passing particles, time resolution on particles impacting the sensor, and overall rate capabilities. In addition the feasible detector area and cost frequently provides a limit to what can be built and therefore is often another area where improvements are important. Finally, radiation tolerance is becoming a requirement in a broad array of devices. We present a status report on a broad category of sensors, including challenges for the future and work in progress to solve those challenges.

  3. Fiber-optic seismic sensor

    Finch, G. W.; Udd, E.

    1985-01-01

    A vibration sensor is constructed by providing two preferably matched coils of fiber-optic material. When the sensor experiences vibration, a differential pressure is exerted on the two fiber coils. The differential pressure results in a variation in the relative optical path lengths between the two fibers so that light beams transmitted through the two fibers are differently delayed, the phase difference therebetween being a detectable indication of the vibration applied to the sensor

  4. Generating three-parameter sensor

    Filinyuk M. A.

    2014-08-01

    Full Text Available Generating sensors provide the possibility of getting remote information and its easy conversion into digital form. Typically, these are one-parameter sensors formed by combination of a primary transmitter (PT and a sine wave generator. Two-parameter sensors are not widely used as their implementation causes a problem with ambiguity output when measuring the PT. Nevertheless, the problem of creating miniature, thrifty multi-parameter RF sensors for different branches of science and industry remains relevant. Considering ways of designing RF sensors, we study the possibility of constructing a three-parameter microwave radio frequency range sensor, which is based on a two-stage three-parameter generalized immitance convertor (GIC. Resistive, inductive and capacitive PT are used as sensing elements. A mathematical model of the sensor, which describes the relation of the sensor parameters to the parameters of GIC and PT was developed. The basic parameters of the sensor, its transfer function and sensitivity were studied. It is shown that the maximum value of the power generated signal will be observed at a frequency of 175 MHz, and the frequency ranges depending on the parameters of the PT will be different. Research results and adequacy of the mathematical model were verified by the experiment. Error of the calculated dependences of the lasing frequency on PT parameters change, compared with the experimental data does not exceed 2 %. The relative sensitivity of the sensor based on two-stage GIC showed that for the resistive channel it is about 1.88, for the capacitive channel –1,54 and for the inductive channel –11,5. Thus, it becomes possible to increase the sensor sensitivity compared with the sensitivity of the PT almost 1,2—2 times, and by using the two stage GIC a multifunctional sensor is provided.

  5. Wireless Sensor Network Security Analysis

    Hemanta Kumar Kalita; Avijit Kar

    2009-01-01

    The emergence of sensor networks as one of the dominant technology trends in the coming decades hasposed numerous unique challenges to researchers. These networks are likely to be composed of hundreds,and potentially thousands of tiny sensor nodes, functioning autonomously, and in many cases, withoutaccess to renewable energy resources. Cost constraints and the need for ubiquitous, invisibledeployments will result in small sized, resource-constrained sensor nodes. While the set of challenges ...

  6. Wireless Sensor Network Safety Study

    M.Shankar; Dr.M.Sridar; Dr.M.Rajani

    2012-01-01

    Few security mechanisms in wireless sensor networks (WSNs) have been implemented, and even fewer have been applied in real deployments. The limited resources of each sensor node makes security in WSNs hard, as the tradeoff between security and practicality must be carefully considered. These complex systems include in their design different types of information and communication technology systems, such as wireless (mesh) sensor networks, to carry out control processes in real time. This fact...

  7. Irradiance sensors for solar systems

    Storch, A.; Schindl, J. [Oesterreichisches Forschungs- und Pruefzentrum Arsenal GesmbH, Vienna (Austria). Business Unit Renewable Energy

    2004-07-01

    The presented project surveyed the quality of irradiance sensors used for applications in solar systems. By analysing an outdoor measurement, the accuracies of ten commercially available irradiance sensors were evaluated, comparing their results to those of a calibrated Kipp and Zonen pyranometer CM21. Furthermore, as a simple method for improving the quality of the results, for each sensor an irradiance-calibration was carried out and examined for its effectiveness. (orig.)

  8. MEMS Bragg grating force sensor

    Reck, Kasper; Thomsen, Erik Vilain; Hansen, Ole

    2011-01-01

    We present modeling, design, fabrication and characterization of a new type of all-optical frequency modulated MEMS force sensor based on a mechanically amplified double clamped waveguide beam structure with integrated Bragg grating. The sensor is ideally suited for force measurements in harsh...... environments and for remote and distributed sensing and has a measured sensitivity of -14 nm/N, which is several times higher than what is obtained in conventional fiber Bragg grating force sensors. © 2011 Optical Society of America....

  9. Estudio del crecimiento de Prioria copaifera (Caesalpinaceae mediante técnicas dendrocronológicas

    Jorge Andrés Giraldo Jiménez

    2011-12-01

    Full Text Available El cativo (Prioria copaifera G. forma bosques dominados por la especie llamados cativales. Durante más de 70 años el cativo ha sido la base principal de la industria maderera en el Darién colombiano, siendo, por su alta productividad y dominancia uno de los bosques tropicales más fáciles de ordenar sosteniblemente. El propósito de esta investigación es modelar el crecimiento del diámetro y el volumen del cativo en función de la edad así como las tasas instantáneas, medias y relativas, empleando anillos de crecimiento. La anualidad de los anillos se demostró usando el efecto de las bombas nucleares y mediante cofechado. Con base en los anillos de crecimiento radiales se modelo el crecimiento del diámetro y del volumen. Esta especie alcanza 40cm de diámetro en 90 años y presenta crecimiento medio de 0.31cm/año. El lapso vital de la especie es de aproximadamente 614 años. El incremento corriente anual máximo del volumen a los 90 años es 0.033m3/año, e iguala al incremento medio a los 145 años con 0.018m3/año. La tasa media de crecimiento absoluta es 0.021m3/año. Los resultados aquí obtenidos sirven como base técnica para el manejo sostenible de los cativales.A growth study of Prioria copaifera (Caesalpinaceae using dendrochronological techniques. The Cativo (Prioria copaifera forms very homogeneous forests called cativales in the flooded plains of some rivers from Costa Rica to Colombia. For over 70 years Cativo has been the main base of the timber industry in the Colombian Darien area. Because of high productivity and high-dominance of Cativo trees, they represent one of the most prone tropical forests for sustainable forest management. The objective of this research is to model diameter and timber volume growth and growth rates (absolute, mean and relative of Cativo as a function of age, using tree ring data derived from dendrochronologycal techniques. We evaluated the annual nature of the tree rings by radiocarbon

  10. Tribología de recubrimientos Cermet/NiCrBSi depositados mediante HVOF

    Guilemany, J. M.

    2004-04-01

    Full Text Available This work consists on a deep tribological study of the WX system composed by a mechanical blend in different compositions of NiCrBSi and WC-12Co powders: 20% NiCrBSi (W2, 40% NiCrBSi (W4 y 60% NiCrBSi (W6. The coatings have been obtained by high velocity oxy-fuel process (HVOF. The measurements made by Ball-On-Disk test are: the friction coefficient is lower than 0.5 and the exchanged energy between the counterparts is under 10 KJ. To quantify the friction wear rate, the volume loss and the track depth, Scanning White Light Interferometry and SEM have been used. The track depth is proportional to the amount of NiCrBSi. A higher percentage of WC-12Co increases the friction wear resistance and decreases the abrasion wear rate (Rubber Wheel test. In all the coatings studied, no diffusion processes are found between the mixed phases, the adhesion between the coatings and the substrate is excellent, the porosity level is below 2% and an increase of microhardness of the coating due to a strengthening of the matrix produced by impacts of solid particles, takes place.

    El trabajo consta de un completo estudio tribológico del sistema WX que consiste en la mezcla mecánica de WC-12Co y NiCrBSi en diferentes proporciones: 20% NiCrBSi (W2, 40% NiCrBSi (W4 y 60% NiCrBSi (W6. Los recubrimientos se han obtenido por proyección térmica de alta velocidad (HVOF. Para todos los sistemas, el coeficiente de fricción es menor que 0.5 y la energía intercambiada entre el par friccionante y el recubrimiento es inferior a 10 KJ. Para cuantificar el desgaste por fricción se han utilizado la profundidad de la huella y el volumen perdido durante el ensayo, obtenidos mediante Interferometría de Barrido de Luz Blanca (SLWI y SEM. La profundidad de la huella sigue una evolución directamente proporcional al contenido en NiCrBSi. Un mayor contenido en WC-12Co aumenta la resistencia al desgaste por fricción y disminuye la velocidad de desgaste por abrasión (ensayo

  11. Falácia naturalista e naturalismo moral: do é ao deve mediante o quero

    Adriano Naves de Brito

    2010-06-01

    Full Text Available O objetivo deste texto é discutir alguns argumentos contra a aceitação da falácia naturalista. Pretende-se mostrar aspectos que parecem corretos na argumentação dos que recusam aquela falácia, e, a despeito de seus acertos, demonstrar que estão fundamentalmente errados. O eixo para este desfecho é a reformulação da falácia em termos da recusa da implicação entre o ser e o querer. Espera-se, assim, tornar mais claras as relações - e a ausência delas - entre verdade e moral, bem como abrir espaço para a defesa de um naturalismo moral não comprometido com a existência de fatos morais. Este texto está dividido em cinco partes. Na primeira, apresenta-se a falácia naturalista de acordo com Moore; na segunda, distingue-se essa entre as formulações de Moore e de Hume; na terceira, apresentam-se objeções à interdição da passagem do "é" ao "deve" e se formulam respostas a essas objeções; na quarta, reapresenta-se o problema da interdição entre "é" e "deve" e se focaliza uma solução alternativa a ele mediante o querer; e, finalmente, na quinta parte, elaboram-se algumas conclusões acerca do naturalismo e do realismo na moral.This article aims to discuss some arguments against the acceptance of the naturalistic fallacy. It intends to demonstrate that some aspects, which seem to be correct in the argumentation of those who refuse that fallacy, are, despite their pertinence in some points, fundamentally imprecise. In order to reach this outcome, the fallacy is reformulated in terms of the refuse of the implication between "being" and "the will". Therefore, it pretends to clarify the relations - and their absence - between truth and morality as well as enable a defense of a moral naturalism disengaged from the existence of moral facts. This text is divided in five parts. In the first one, I show the naturalistic fallacy according to Moore; in the second part, a distinction between Moore's and Hume's formulations of the

  12. An Introduction to LANL Mixed Potential Sensors

    Mukundan, Rangachary [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brosha, Eric Lanich [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kreller, Cortney [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-01-26

    These are slides for a webinar given on the topics of an introduction to LANL mixed potential sensors. Topics include the history of LANL electrochemical sensor work, an introduction to mixed potential sensors, LANL uniqueness, and an application of LANL mixed potential sensors. The summary is as follows: Improved understanding of the mixed-potential sensor mechanism (factors controlling the sensor response identified), sensor design optimized to maximize sensor sensitivity and durability (porous electrolyte/dense electrodes), electrodes selected for various specific applications (CO, HC, H2), sensor operating parameters optimized for improved gas selectivity (NOx, NH3).

  13. High Resolution Flexible Tactile Sensors

    Drimus, Alin; Bilberg, Arne

    2011-01-01

    both spatial distribution of pressure and dynamic events such as contact, release of contact and slip. Data acquisition and object recognition applications are described and it is proposed that such a sensor could be used in robotic grippers to improve object recognition, manipulation of objects......This paper describes the development of a tactile sensor for robotics inspired by the human sense of touch. It consists of two parts: a static tactile array sensor based on piezoresistive rubber and a dynamic sensor based on piezoelectric PVDF film. The combination of these two layers addresses...

  14. JSC Wireless Sensor Network Update

    Wagner, Robert

    2010-01-01

    Sensor nodes composed of three basic components... radio module: COTS radio module implementing standardized WSN protocol; treated as WSN modem by main board main board: contains application processor (TI MSP430 microcontroller), memory, power supply; responsible for sensor data acquisition, pre-processing, and task scheduling; re-used in every application with growing library of embedded C code sensor card: contains application-specific sensors, data conditioning hardware, and any advanced hardware not built into main board (DSPs, faster A/D, etc.); requires (re-) development for each application.

  15. Sensor Applications and Data Validation

    Wiley, John

    2008-01-01

    The mechanical configuration of automobiles have changed marginally while improvements in sensors and control have dramatically improved engine efficiency, reliability and useful life. The aviation industry has also taken advantage of sensors and control systems to reduce operational costs. Sensors and high fidelity control systems fly planes at levels of performance beyond human capability. Sophisticated environmental controls allow a greater level of comfort and efficiency in our homes. Sensors have given the medical field a better understanding of the human body and the environment in which we live.

  16. Fiber-Optic Sensor Facility

    Federal Laboratory Consortium — FUNCTION: Constructs and evaluates fiber-optic sensors for a variety of measurands. These measurands include acoustic, pressure, magnetic, and electric field as well...

  17. Photon-counting image sensors

    Teranishi, Nobukazu; Theuwissen, Albert; Stoppa, David; Charbon, Edoardo

    2017-01-01

    The field of photon-counting image sensors is advancing rapidly with the development of various solid-state image sensor technologies including single photon avalanche detectors (SPADs) and deep-sub-electron read noise CMOS image sensor pixels. This foundational platform technology will enable opportunities for new imaging modalities and instrumentation for science and industry, as well as new consumer applications. Papers discussing various photon-counting image sensor technologies and selected new applications are presented in this all-invited Special Issue.

  18. Network compensation for missing sensors

    Ahumada, Albert J., Jr.; Mulligan, Jeffrey B.

    1991-01-01

    A network learning translation invariance algorithm to compute interpolation functions is presented. This algorithm with one fixed receptive field can construct a linear transformation compensating for gain changes, sensor position jitter, and sensor loss when there are enough remaining sensors to adequately sample the input images. However, when the images are undersampled and complete compensation is not possible, the algorithm need to be modified. For moderate sensor losses, the algorithm works if the transformation weight adjustment is restricted to the weights to output units affected by the loss.

  19. Sensor Network Motes:

    Leopold, Martin

    requirements on price and performance, and shows great potential for using sensor networks. Throughout the project we let the application requirements guide our design choices, leading us to push the technologies further to meet the specific goal of the application. In this dissertation, we attack two key...... areas related to the design of this solution. We found the current state of the art within performance evaluation to be inadequate and that the moving to the next generation platforms is being held back by practical issues in porting existing software. We have taken a pragmatic, experimental approach...

  20. Bolt Shear Force Sensor

    2015-03-12

    0030] FIG. 7 is an isometric view of a deformable ring of the bolt shear force sensor of the present invention with an optical Attorney Docket No...102587 9 of 19 fiber having Bragg gratings wound around the ring; [0031] FIG. 8 is an isometric view of the deformable ring with wire strain... strength . [0047] Once the joint is subjected to an external load (see force arrows “F” and “F/2”); any frictional resistance to slip is overcome and

  1. Fluorescent sensor for mercury

    Wang, Zidong [Urbana, IL; Lee, Jung Heon [Evanston, IL; Lu, Yi [Champaign, IL

    2011-11-22

    The present invention provides a sensor for detecting mercury, comprising: a first polynucleotide, comprising a first region, and a second region, a second polynucleotide, a third polynucleotide, a fluorophore, and a quencher, wherein the third polynucleotide is optionally linked to the second region; the fluorophore is linked to the first polynucleotide and the quencher is linked to the second polynucleotide, or the fluorophore is linked to the second polynucleotide and the quencher is linked to the first polynucleotide; the first region and the second region hybridize to the second polynucleotide; and the second region binds to the third polynucleotide in the presence of Hg.sup.2+ ions.

  2. Chemoresistive gas sensor

    Hirschfeld, T.B.

    1987-06-23

    A chemoresistive gas sensor is provided which has improved sensitivity. A layer of organic semiconductor is disposed between two electrodes which, in turn, are connected to a voltage source. High conductivity material is dispersed within the layer of organic semiconductor in the form of very small particles, or islands. The average interisland spacing is selected so that the predominant mode of current flow is by way of electron funneling. Adsorption of gaseous contaminant onto the layer of organic semiconductor modulates the tunneling current in a quantitative manner. 2 figs.

  3. Airborne Laser Polarization Sensor

    Kalshoven, James, Jr.; Dabney, Philip

    1991-01-01

    Instrument measures polarization characteristics of Earth at three wavelengths. Airborne Laser Polarization Sensor (ALPS) measures optical polarization characteristics of land surface. Designed to be flown at altitudes of approximately 300 m to minimize any polarizing or depolarizing effects of intervening atmosphere and to look along nadir to minimize any effects depending on look angle. Data from measurements used in conjunction with data from ground surveys and aircraft-mounted video recorders to refine mathematical models used in interpretation of higher-altitude polarimetric measurements of reflected sunlight.

  4. Fixture For Mounting A Pressure Sensor

    Cagle, Christopher M.

    1995-01-01

    Fixture for mounting pressure sensor in aerodynamic model simplifies task of removal and replacement of sensor in event sensor becomes damaged. Makes it unnecessary to dismantle model. Also minimizes any change in aerodynamic characteristics of model in event of replacement. Removable pressure sensor installed in fixture in wall of model. Wires from sensor pass through channel under surface.

  5. Modificación de la personalidad mediante una terapia cognitivo-conductual de afrontamiento al estrés

    Julia Linares-Ortiz

    2014-01-01

    Full Text Available El objetivo de este estudio ha sido comprobar la posibilidad de modulación de variables de personalidad (tales como algunos de los Cinco Grandes Factores, o la personalidad resistente a través de la aplicación de un programa de afrontamiento del estrés. Para ello, han participado 26 personas del ámbito universitario con alto estrés percibido, distribuidas en dos grupos (grupo de tratamiento y grupo de control. Los instrumentos de evaluación seleccionados se clasificaron en dos grupos: variables psicológicas y emocionales y variables de personalidad. Los resultados encontrados mediantes un ANOVA de medidas repetidas mostraron que existía interacción momento x grupo en las variables optimismo, extraversión y responsabilidad, correspondientes al Modelo de los Cinco Grandes Factores, mostrando un incremento de las puntuaciones en estas variables en el grupo terapia y no encontrándose dicha interacción en el grupo control. Las puntuaciones en los componentes de neuroticismo, amabilidad, apertura a la experiencia y personalidad resistente no se modificaron en ninguno de los dos grupos. Este estudio apoya la idea de que modificando determinados parámetros emocionales relacionados con el estrés mediante terapia cognitivo-conductual se pueden ver modulados algunos factores de personalidad.

  6. DETECCIÓN DEL DISCO ÓPTICO EN RETINOGRAFÍAS MEDIANTE UNA ESTRATEGIA EVOLUTIVA (µ+λ

    Germán Sánchez Torres

    Full Text Available En este artículo se presenta un procedimiento para la detección del disco óptico (DO en retinografías, mediante un algoritmo evolutivo. El procedimiento tiene dos etapas principales: la detección gruesa de la posición del DO y el refinamiento de los bordes del contorno. La detección gruesa ubica la posición del DO mediante un algoritmo evolutivo, cuyos individuos tienen como función objetivo la cantidad de píxeles brillantes y el número de bordes de la red de conductos sanguíneos, contenidos dentro de una circunferencia. La etapa de refinamiento aplica un procedimiento geométrico, para deformar el círculo inicial, ajustando el borde de éste con la posición del píxel de mayor variación en dirección al vector normal. El procedimiento fue evaluado empleando los repositorios públicos STARE y DIAREDB, procesando imágenes de pacientes sanos y con alteraciones de las retina, generadas por la presencia de retinopatía diabética. Los resultados experimentales muestran que el método propuesto puede identificar la posición del disco óptico en retinografías con una precisión cercana al 96 %.

  7. Detección Molecular de Toxinas Termoestable y Termolabil de Escherichia coli mediante Hibridación

    Isabel Arias B

    2002-10-01

    Full Text Available Objetivos: Identificar mediante el método de hibridización por colony blot las toxinas de Escherichia coli enterotoxigénica y relacionar los resultados con los serotipos encontrados. Materiales y métodos: se evaluaron todas las cepas de E. Coli recolectadas en el Hospital de Emergencias Pediátricas de Lima durante los meses de diciembre de 1998 - abril 1999. Se usaron dos sendas de ADN que identificaban el gen de la toxina termolábil (LT y el de la toxina termoestable (ST Para la detección de los serotipos se usaron 22 antisueros de diferentes categorías de E. coli. Resultados: se encontraron 233 cepas de E. coli, 27,9% de E. coli poseían el gen LT, 3,0% el gen ST y 1,3% tenían ambos. Conclusiones: los serotipos y la presencia de los genes LT y ST no necesariamente tienen relación, demostrándose que la identificación serológica es importante en el estudio epidemiológico de diarreas causadas por E. coli debiéndose confirmar la identificación de las categorías patogénicas mediante la detección de factores de virulencia.

  8. EL APRENDIZAJE DE LOS CONCEPTOS DE FUERZAS INTERMOLECULARES E INTRAMOLECULARES MEDIANTE LA MODELIZACIÓN DIDÁCTICA

    CHRISTIAN FERNNEY GIRALDO MACÍAS

    2013-07-01

    Full Text Available La modelización está siendo usada para la enseñanza y el aprendizaje en las Ciencias Naturales en diferentes contextos y para atender a diferentes problemáticas. En este caso será utilizada para explorar y analizar la relevancia que puede tener su uso en el aprendizaje de los conceptos Fuerzas Intramoleculares e Intermolecualres, partiendo de la aplicación de una serie de actividades basadas en el Ciclo Didáctico (Jorba y Sanmartí, 1996. Los datos se discuten mediante tres aspectos principales: las ideas previas de los estudiantes, el trabajo con nuevo material (nuevos conceptos, experimentos sencillos y uso de herramientas informáticas y los argumentos finales, mediante el uso de situaciones problemas. Los resultados muestran, como los estudiantes (14 y 16 años de edad evidencian un progreso conceptual al argumentar con mayor claridad las situaciones problema abordadas en el transcurso del trabajo y en la construcción de modelos más cercanos al campo científico.

  9. Manejo sostenible y sustentable de fincas productoras mediante procesos participativos en Sáchica, Boyacá

    Ángel Eduardo Ramírez-Amaya

    2013-07-01

    Full Text Available Objetivo. Elaborar un proyecto de desarrollo sostenible y sustentable de fincas productoras mediante procesos participativos en el municipio de Sáchica, Boyacá. Materiales y métodos. La investigación se realizó con familias campesinas de la vereda Arrayán Alto, del municipio de Sáchica, Boyacá, mediante la metodología Investigación Acción Participativa (IAP, que se centra en la participación de las comunidades para elaborar propuestas concertadas con ellas. El trabajo se desarrolló en varias fases, que incluyeron un diagnóstico socioeconómico de las familias, capacitaciones y concientización en temas relacionados con la agricultura ecológica y de granjas integrales. Resultados. Se elaboró un plan de trabajo que permitió la construcción de un documento final que ha servido para el apoyo logístico o económico de las entidades gubernamentales locales para la instalación y plantación técnica del cultivo de gulupa con familias de la vereda Arrayán Alto.

  10. Producción de biodiesel de aceite crudo de palma mediante catálisis heterogénea

    Fernando Cardeño

    2010-01-01

    Full Text Available Se estudió la producción de biodiesel de aceite crudo de palma mediante el uso de catalizadores heterogéneos ácidos y básicos para las etapas de preesterificación y transesterificación respectivamente. La pre-esterificación es necesaria para aceites con una acidez superior al 4% de ácidos grasos libres, ya que se evitan los problemas asociados con la formación de jabones. En ambas reacciones las variables analizadas fueron el tipo de catalizador, la temperatura y el tiempo. Se analizó la conversión del aceite a metilésteres usando cromatografía gaseosa y la estabilidad de los catalizadores mediante su reutilización. En la etapa de pre-esterificación se encontró que catalizadores ácidos del tipo resinas de poliestireno sulfonadas presentan conversiones superiores al 87% estabilidad para la esterificación de los ácidos grasos libres. Para la transesterificación se estudiaron como catalizadores heterogéneos, el carbonato de potasio libre y soportado en una matriz polimérica, obteniéndose con ambos conversiones superiores a 95 % de biodiesel; con el uso del soporte polimérico se disminuyó la velocidad de disolución de carbonato de potasio, permitiendo su reutilización hasta 10 reutilizaciones.

  11. Valoración de las aguas residuales mediante procedimientos analíticos y biológicos

    M. Carballo

    2002-06-01

    Full Text Available Ciertos procedimientos, basados en aproximaciones analíticas y biológicas, están demostrando ser útiles en la valoración del riesgo de las aguas residuales urbanas procedentes de las Plantas de Tratamiento. Estos efluentes, considerados “mezclas complejas”, compuestos por sustancias de muy diferente naturaleza, origen y características toxicológicas y medio ambientales, requieren una valoración realista. Con el fin de colaborar al conocimiento de una parte de la realidad de nuestro país, presentamos un estudio sobre once depuradoras urbanas en las que se ha realizado un perfil de compuestos orgánicos y una valoración toxicológica mediante tests de toxicidad agudos, crónicos, de estrogenicidad, mutagenicidad y teratogenia. Los resultados muestran que 7 efluentes presentan toxicidad aguda, 3 toxicidad crónica y 4 estrogenicidad. Destacamos el hecho de que los 4 efluentes que presentan estrogenicidad, poseen al menos 3 de las sustancias estrogénicas detectadas mediante el perfil cromatográfico. Este tipo de consideraciones nos hace reflexionar sobre la necesidad de incorporar este tipo de metodologías para disponer de un conocimiento más realista de estas situaciones.

  12. Dynamic Sensor Network Reprogramming using SensorScheme

    Evers, L.; Havinga, Paul J.M.; Kuper, Jan

    2007-01-01

    Building wireless sensor network applications is a challenging task, and it has become apparent that it is crucial for many sensor networks to be able to load or update the application after deployment. Since communication is a scarce resource and costly in terms of energy, it is important to

  13. Extending lifetime of wireless sensor networks using multi-sensor ...

    SOUMITRA DAS

    In this paper a multi-sensor data fusion approach for wireless sensor network based on bayesian methods and ant colony ... niques for efficiently routing the data from source to the BS ... Literature review ... efficient scheduling and lot more to increase the lifetime of ... Nature-inspired algorithms such as ACO algorithms have.

  14. Temperature Sensors Integrated into a CMOS Image Sensor

    Abarca Prouza, A.N.; Xie, S.; Markenhof, Jules; Theuwissen, A.J.P.

    2017-01-01

    In this work, a novel approach is presented for measuring relative temperature variations inside the pixel array of a CMOS image sensor itself. This approach can give important information when compensation for dark (current) fixed pattern noise (FPN) is needed. The test image sensor consists of

  15. Graphene Electronic Tattoo Sensors.

    Kabiri Ameri, Shideh; Ho, Rebecca; Jang, Hongwoo; Tao, Li; Wang, Youhua; Wang, Liu; Schnyer, David M; Akinwande, Deji; Lu, Nanshu

    2017-08-22

    Tattoo-like epidermal sensors are an emerging class of truly wearable electronics, owing to their thinness and softness. While most of them are based on thin metal films, a silicon membrane, or nanoparticle-based printable inks, we report sub-micrometer thick, multimodal electronic tattoo sensors that are made of graphene. The graphene electronic tattoo (GET) is designed as filamentary serpentines and fabricated by a cost- and time-effective "wet transfer, dry patterning" method. It has a total thickness of 463 ± 30 nm, an optical transparency of ∼85%, and a stretchability of more than 40%. The GET can be directly laminated on human skin just like a temporary tattoo and can fully conform to the microscopic morphology of the surface of skin via just van der Waals forces. The open-mesh structure of the GET makes it breathable and its stiffness negligible. A bare GET is able to stay attached to skin for several hours without fracture or delamination. With liquid bandage coverage, a GET may stay functional on the skin for up to several days. As a dry electrode, GET-skin interface impedance is on par with medically used silver/silver-chloride (Ag/AgCl) gel electrodes, while offering superior comfort, mobility, and reliability. GET has been successfully applied to measure electrocardiogram (ECG), electromyogram (EMG), electroencephalogram (EEG), skin temperature, and skin hydration.

  16. Echosonography with proximity sensors

    Thaisiam, W; Laithong, T; Meekhun, S; Chaiwathyothin, N; Thanlarp, P; Danworaphong, S

    2013-01-01

    We propose the use of a commercial ultrasonic proximity sensor kit for profiling an altitude-varying surface by employing echosonography. The proximity sensor kit, two identical transducers together with its dedicated operating circuit, is used as a profiler for the construction of an image. Ultrasonic pulses are emitted from one of the transducers and received by the other. The time duration between the pulses allows us to determine the traveling distance of each pulse. In the experiment, the circuit is used with the addition of two copper wires for directing the outgoing and incoming signals to an oscilloscope. The time of flight of ultrasonic pulses can thus be determined. Square grids of 5 × 5 cm 2 are made from fishing lines, forming pixels in the image. The grids are designed to hold the detection unit in place, about 30 cm above a flat surface. The surface to be imaged is constructed to be height varying and placed on the flat surface underneath the grids. Our result shows that an image of the profiled surface can be created by varying the location of the detection unit along the grid. We also investigate the deviation in relation to the time of flight of the ultrasonic pulse. Such an experiment should be valuable for conveying the concept of ultrasonic imaging to physical and medical science undergraduate students. Due to its simplicity, the setup could be made in any undergraduate laboratory relatively inexpensively and it requires no complex parts. The results illustrate the concept of echosonography. (paper)

  17. Fiber Sensor Technology Today

    Hotate, Kazuo

    2006-08-01

    Fiber sensor technologies are overviewed. Since the early 1970s, this field has been developed, on the basis of the same devices and photonic principles as fiber communication technologies. Besides simple configurations, in which the fiber acts only as a data transmission line, sophisticated configurations have also been developed, in which the fiber is used as a device to realize unique sensing mechanisms. The fiber optic gyroscope (FOG) is a good example, and has been developed as an absolute rotation sensor used, for example, for navigation and/or attitude control applications. Compared with traditional spinning-mass gyroscopes, the FOG has advantages, such as a short warming-up time, a light weight, and easy handling. A Japanese satellite, which was launched in August 2005 with a mission to observe the aurora, is controlled with a FOG. The FOG has also been used in consumer applications, such as the camera stabilizer, radio-controlled (RC) helicopter navigation, and the control of humanoid robots. Recently, distributed and multiplexed sensing schemes, in particular, have been studied and developed, in which a long fiber acts like a “nerve” for feeling the strain and/or the temperature distribution along the fiber. Performances of artificial nerve systems have markedly improved within the last couple of years, in spatial resolution and measurement speed. By embedding the “fiber-optic nerve system” in aircraft wings, bridges and tall buildings, these materials and structures can sense damage to prevent disasters.

  18. SQUID position sensor development

    Torii, Rodney

    1996-11-01

    I describe the development of an inductance position sensor for the STEP (satellite test of the equivalence principle) accelerometer. I have measured the inductance (with an experimental error of 0.5%) of a single-turn thin-film niobium pick-up coil as a function of the distance from a thin-film niobium disc (both at 4.2 K and superconducting). The circular pick-up coil had a diameter of 4 cm with a track width of 0264-9381/13/11A/022/img1. The disc (mock test mass) had a diameter of 4 cm. The distance range between the coil and disc was set by the range of a low-temperature differential capacitance sensor: 0 - 2 mm with a resolution of 0264-9381/13/11A/022/img2. The full range of the low-temperature translation stage was 0 - 4 mm. The inductance was measured using an LCR meter in a four-wire configuration. The measured inductance was compared to the inductance of a circular loop above a superconducting plane. Due to the fact that the thin-film disc is of finite size, the calculation differed from experiment by as much as 12%. I have also calculated the inductance by segmenting the thin-film niobium disc into 500 concentric rings (each with a width of 0264-9381/13/11A/022/img3). A discrepancy between calculation and experiment of approximately 3% was found.

  19. Modelo para estimativa do potencial produtivo em trigo e cevada por meio do sensor GreenSeeker Model for yield potential estimation in wheat and barley using the GreenSeeker sensor

    Daniel S. Grohs

    2009-03-01

    Full Text Available Áreas com diferentes potenciais de rendimento dentro de uma lavoura necessitam ser manejadas separadamente, para fins de aplicação da adubação nitrogenada em cobertura. O equipamento baseado em sensoriamento remoto terrestre (GreenSeeker é um dos instrumentos utilizados para separar diferentes zonas de manejo. Para fazer isso, o sensor permite a definição de classes para estimar o potencial produtivo de forma ágil, precisa e em tempo real. Com o instrumento, foi desenvolvido um modelo para estimativa do potencial produtivo em trigo e cevada, correlacionando o Índice de Vegetação por Diferença Normalizada (NDVI com a biomassa seca acumulada na parte aérea, por ocasião da emissão da sexta folha do colmo principal. A base do modelo foi a formação de classes de potencial produtivo correspondentes a zonas específicas de manejo da lavoura. Essas classes não necessitam ser específicas para diferentes cultivares e/ou espécies, visto que não se detectaram diferenças que justificassem a formação de grupos para elas. As superfícies de fundo (resíduos de restevas de soja e milho tiveram efeitos significativos nas leituras do sensor. O modelo continua válido mesmo se as leituras de NDVI forem feitas antes ou após o período recomendado para tal, podendo ser ajustado com sub ou superestimação. As análises de variabilidade espacial, futuramente, podem avaliar se, as zonas de potencial produtivo estimadas pelas classes de NDVI propostas pelo modelo, correspondem à flutuação espacial da biomassa, doses de N aplicadas e rendimento de grãos.Areas with different yield potential within a field need to be managed separately as for nitrogen application in small grain cereals. Terrestrial remote sensing-based equipment such as the GreenSeeker sensor is one of the tools available to handle different management zones. To do this, the sensor allows the definition of classes to estimate yield potential. A model which correlated the

  20. Ana?lisis cinemático de la marcha en pacientes con pie zambo tratados mediante el me?todo de Ponseti frente a la te?cnica quiru?rgica de liberacio?n posterior

    Ferrando, A.; Salom Taverner, M.; Page, A.

    2018-01-01

    El objetivo principal de este proyecto consiste en valorar la evolución de la marcha en niños en edad preadolescente tratados mediante el método de Ponseti frente a los tratados mediante liberación posterior a partir de técnicas de valoración de la marcha mediante análisis biomecánico. Material y Métodos Estudio retrospectivo de casos y controles aprobado por el comité de ética. Grupo 1: 28 niños (39 pies) tratados mediante liberación posterior. Grupo 2: 18 pacientes (31 pies) tratados median...