A numerical formulation using unstructured grids for modeling two-phase flows in porous media considering heterogeneities and capillarity effects

International Nuclear Information System (INIS)

Hurtado, F.S.V.; Maliska, C.R.

2005-01-01

This paper briefly describes a two-dimensional numerical formulation using unstructured grids, developed for simulating two-phase immiscible displacements in porous media. The Element-based Finite Volume Method (EbFVM) is used for discretizing the model differential equations. (authors)

A numerical formulation using unstructured grids for modeling two-phase flows in porous media considering heterogeneities and capillarity effects

Energy Technology Data Exchange (ETDEWEB)

Hurtado, F.S.V.; Maliska, C.R. [Santa Catarina Federal Univ., Computational Fluid Dynamics Lab., Mechanical Engineering Dept., Florianopolis, SC (Brazil)

2005-07-01

This paper briefly describes a two-dimensional numerical formulation using unstructured grids, developed for simulating two-phase immiscible displacements in porous media. The Element-based Finite Volume Method (EbFVM) is used for discretizing the model differential equations. (authors)

Numerical modeling of bubble dynamics in viscoelastic media with relaxation

Science.gov (United States)

Warnez, M. T.; Johnsen, E.

2015-06-01

Cavitation occurs in a variety of non-Newtonian fluids and viscoelastic materials. The large-amplitude volumetric oscillations of cavitation bubbles give rise to high temperatures and pressures at collapse, as well as induce large and rapid deformation of the surroundings. In this work, we develop a comprehensive numerical framework for spherical bubble dynamics in isotropic media obeying a wide range of viscoelastic constitutive relationships. Our numerical approach solves the compressible Keller-Miksis equation with full thermal effects (inside and outside the bubble) when coupled to a highly generalized constitutive relationship (which allows Newtonian, Kelvin-Voigt, Zener, linear Maxwell, upper-convected Maxwell, Jeffreys, Oldroyd-B, Giesekus, and Phan-Thien-Tanner models). For the latter two models, partial differential equations (PDEs) must be solved in the surrounding medium; for the remaining models, we show that the PDEs can be reduced to ordinary differential equations. To solve the general constitutive PDEs, we present a Chebyshev spectral collocation method, which is robust even for violent collapse. Combining this numerical approach with theoretical analysis, we simulate bubble dynamics in various viscoelastic media to determine the impact of relaxation time, a constitutive parameter, on the associated physics. Relaxation time is found to increase bubble growth and permit rebounds driven purely by residual stresses in the surroundings. Different regimes of oscillations occur depending on the relaxation time.

Numerical heat transfer analysis of transcritical hydrocarbon fuel flow in a tube partially filled with porous media

Directory of Open Access Journals (Sweden)

Jiang Yuguang

2016-01-01

Full Text Available Hydrocarbon fuel has been widely used in air-breathing scramjets and liquid rocket engines as coolant and propellant. However, possible heat transfer deterioration and threats from local high heat flux area in scramjet make heat transfer enhancement essential. In this work, 2-D steady numerical simulation was carried out to study different schemes of heat transfer enhancement based on a partially filled porous media in a tube. Both boundary and central layouts were analyzed and effects of gradient porous media were also compared. The results show that heat transfer in the transcritical area is enhanced at least 3 times with the current configuration compared to the clear tube. Besides, the proper use of gradient porous media also enhances the heat transfer compared to homogenous porous media, which could help to avoid possible over-temperature in the thermal protection.

Mathematical and numerical modeling considerations for radionuclide ion migration in porous media

International Nuclear Information System (INIS)

Treadway, A.H.

1984-04-01

The equations governing radionuclide transport in sorbing, porous media are presented using phenomenological coefficients. Both equilibrium controlled and simple rate controlled chemistry are summarized. Several simplified models are discussed. Finally, various numerical problems are considered. 25 references

Progress in electrical impedance imaging of binary media: 1: Analytical and numerical methods

International Nuclear Information System (INIS)

Ovacik, Levent; Lin Jentai; Jones, Owen C.

1998-01-01

This is the first of two papers summarizing the use of electrical impedance excitation/measurement for producing cross sectional images of the distribution of insulating media imbedded in conducting media. This computed tomographic approach finds the distribution of electrical properties of an electric field which minimizes in the least squares sense the difference between measured and computed boundary response to excitation. In this paper we briefly review the basic analytical methods developed for this system. We then extend these methods to three dimensions, add a method for preconditioning voltages for error correction, describe methods for optimizing the resolution of a target by providing optimal excitation patterns and then describe the overall numerical sensitivity. The second paper then demonstrates the ability of this system to image multiple, separate, differently-sized two-dimensional or three-dimensional targets with demonstrated linear sensitivity of over 30:1 with maximum possible linear sensitivity of one part in 1300 based on our ability to distinguish variations from a homogeneous background. (author)

Formulation and numerical analysis of nonisothermal multiphase flow in porous media

International Nuclear Information System (INIS)

Martinez, M.J.

1995-06-01

A mathematical formulation is presented for describing the transport of air, water and energy through porous media. The development follows a continuum mechanics approach. The theory assumes the existence of various average macroscopic variables which describe the state of the system. Balance equations for mass and energy are formulated in terms of these macroscopic variables. The system is supplemented with constitutive equations relating fluxes to the state variables, and with transport property specifications. Specification of various mixing rules and thermodynamic relations completes the system of equations. A numerical simulation scheme, employing the method of lines, is described for one-dimensional flow. The numerical method is demonstrated on sample problems involving nonisothermal flow of air and water. The implementation is verified by comparison with existing numerical solutions

Event-based user classification in Weibo media.

Science.gov (United States)

Guo, Liang; Wang, Wendong; Cheng, Shiduan; Que, Xirong

2014-01-01

Weibo media, known as the real-time microblogging services, has attracted massive attention and support from social network users. Weibo platform offers an opportunity for people to access information and changes the way people acquire and disseminate information significantly. Meanwhile, it enables people to respond to the social events in a more convenient way. Much of the information in Weibo media is related to some events. Users who post different contents, and exert different behavior or attitude may lead to different contribution to the specific event. Therefore, classifying the large amount of uncategorized social circles generated in Weibo media automatically from the perspective of events has been a promising task. Under this circumstance, in order to effectively organize and manage the huge amounts of users, thereby further managing their contents, we address the task of user classification in a more granular, event-based approach in this paper. By analyzing real data collected from Sina Weibo, we investigate the Weibo properties and utilize both content information and social network information to classify the numerous users into four primary groups: celebrities, organizations/media accounts, grassroots stars, and ordinary individuals. The experiments results show that our method identifies the user categories accurately.

Numerical Integration of the Transport Equation For Infinite Homogeneous Media

Energy Technology Data Exchange (ETDEWEB)

Haakansson, Rune

1962-01-15

The transport equation for neutrons in infinite homogeneous media is solved by direct numerical integration. Accounts are taken to the anisotropy and the inelastic scattering. The integration has been performed by means of the trapezoidal rule and the length of the energy intervals are constant in lethargy scale. The machine used is a Ferranti Mercury computer. Results are given for water, heavy water, aluminium water mixture and iron-aluminium-water mixture.

Numerical methods and inversion algorithms in reservoir simulation based on front tracking

Energy Technology Data Exchange (ETDEWEB)

Haugse, Vidar

1999-04-01

This thesis uses front tracking to analyse laboratory experiments on multiphase flow in porous media. New methods for parameter estimation for two- and three-phase relative permeability experiments have been developed. Up scaling of heterogeneous and stochastic porous media is analysed. Numerical methods based on front tracking is developed and analysed. Such methods are efficient for problems involving steep changes in the physical quantities. Multi-dimensional problems are solved by combining front tracking with dimensional splitting. A method for adaptive grid refinement is developed.

Numerical investigation of vapor–liquid heat and mass transfer in porous media

International Nuclear Information System (INIS)

Xin, Chengyun; Rao, Zhonghao; You, Xinyu; Song, Zhengchang; Han, Dongtai

2014-01-01

Highlights: • The heat and mass transfer behaviors in porous media was investigated. • A modified separate flow model (MSFM) was developed. • The influence of heat flux direction on heat and fluid flow behaviors is great. • The saturation profile is weakly discontinuous on the phase interface. • A countercurrent flow exists in two-phase region. - Abstract: A modified separate flow model (MSFM) is developed to numerically investigate the heat and mass transfer behaviors in porous media in this paper. In the MSFM, the effects of capillarity, liquid phase change, nonisothermal two-phase region and the local thermal non-equilibrium (LTNE) are considered. The vapor and liquid velocities are both converted into intermediate variables in the simulations and conveniently convergent solutions are obtained because a special upwind scheme for the convection or boiling heat transfer source and variable convergence factors are simultaneously employed. Two typical numerical examples with a one-dimension model of porous media are studied that the high heat fluxes are vertical and parallel to the fluid flow direction, respectively. And the results indicated that the influence of heat flux direction on heat and fluid flow behaviors in porous media is great. The nonisothermal phenomenon in the two-phase region is obvious for the former while the LTNE phenomenon is remarkable in the two-phase region for the latter. The results also showed several similar behaviors that the saturation profile is weakly discontinuous on the phase interface and a countercurrent flow exists in two-phase region

Event-Based User Classification in Weibo Media

Directory of Open Access Journals (Sweden)

Liang Guo

2014-01-01

Full Text Available Weibo media, known as the real-time microblogging services, has attracted massive attention and support from social network users. Weibo platform offers an opportunity for people to access information and changes the way people acquire and disseminate information significantly. Meanwhile, it enables people to respond to the social events in a more convenient way. Much of the information in Weibo media is related to some events. Users who post different contents, and exert different behavior or attitude may lead to different contribution to the specific event. Therefore, classifying the large amount of uncategorized social circles generated in Weibo media automatically from the perspective of events has been a promising task. Under this circumstance, in order to effectively organize and manage the huge amounts of users, thereby further managing their contents, we address the task of user classification in a more granular, event-based approach in this paper. By analyzing real data collected from Sina Weibo, we investigate the Weibo properties and utilize both content information and social network information to classify the numerous users into four primary groups: celebrities, organizations/media accounts, grassroots stars, and ordinary individuals. The experiments results show that our method identifies the user categories accurately.

Fate and Transport of Nanoparticles in Porous Media: A Numerical Study

Science.gov (United States)

Taghavy, Amir

Understanding the transport characteristics of NPs in natural soil systems is essential to revealing their potential impact on the food chain and groundwater. In addition, many nanotechnology-based remedial measures require effective transport of NPs through soil, which necessitates accurate understanding of their transport and retention behavior. Based upon the conceptual knowledge of environmental behavior of NPs, mathematical models can be developed to represent the coupling of processes that govern the fate of NPs in subsurface, serving as effective tools for risk assessment and/or design of remedial strategies. This work presents an innovative hybrid Eulerian-Lagrangian modeling technique for simulating the simultaneous reactive transport of nanoparticles (NPs) and dissolved constituents in porous media. Governing mechanisms considered in the conceptual model include particle-soil grain, particle-particle, particle-dissolved constituents, and particle- oil/water interface interactions. The main advantage of this technique, compared to conventional Eulerian models, lies in its ability to address non-uniformity in physicochemical particle characteristics. The developed numerical simulator was applied to investigate the fate and transport of NPs in a number of practical problems relevant to the subsurface environment. These problems included: (1) reductive dechlorination of chlorinated solvents by zero-valent iron nanoparticles (nZVI) in dense non-aqueous phase liquid (DNAPL) source zones; (2) reactive transport of dissolving silver nanoparticles (nAg) and the dissolved silver ions; (3) particle-particle interactions and their effects on the particle-soil grain interactions; and (4) influence of particle-oil/water interface interactions on NP transport in porous media.

A mass conservative numerical solution of vertical water flow and mass transport equations in unsaturated porous media

International Nuclear Information System (INIS)

Lim, S.C.; Lee, K.J.

1993-01-01

The Galerkin finite element method is used to solve the problem of one-dimensional, vertical flow of water and mass transport of conservative-nonconservative solutes in unsaturated porous media. Numerical approximations based on different forms of the governing equation, although they are equivalent in continuous forms, can result in remarkably different solutions in an unsaturated flow problem. Solutions given by a simple Galerkin method based on the h-based Richards equation yield a large mass balance error and an underestimation of the infiltration depth. With the employment of the ROMV (restoration of main variable) concept in the discretization step, the mass conservative numerical solution algorithm for water flow has been derived. The resulting computational schemes for water flow and mass transport are applied to sandy soil. The ROMV method shows good mass conservation in water flow analysis, whereas it seems to have a minor effect on mass transport. However, it may relax the time-step size restriction and so ensure an improved calculation output. (author)

Experimental and AI-based numerical modeling of contaminant transport in porous media

Science.gov (United States)

Nourani, Vahid; Mousavi, Shahram; Sadikoglu, Fahreddin; Singh, Vijay P.

2017-10-01

This study developed a new hybrid artificial intelligence (AI)-meshless approach for modeling contaminant transport in porous media. The key innovation of the proposed approach is that both black box and physically-based models are combined for modeling contaminant transport. The effectiveness of the approach was evaluated using experimental and real world data. Artificial neural network (ANN) and adaptive neuro-fuzzy inference system (ANFIS) were calibrated to predict temporal contaminant concentrations (CCs), and the effect of noisy and de-noised data on the model performance was evaluated. Then, considering the predicted CCs at test points (TPs, in experimental study) and piezometers (in Myandoab plain) as interior conditions, the multiquadric radial basis function (MQ-RBF), as a meshless approach which solves partial differential equation (PDE) of contaminant transport in porous media, was employed to estimate the CC values at any point within the study area where there was no TP or piezometer. Optimal values of the dispersion coefficient in the advection-dispersion PDE and shape coefficient of MQ-RBF were determined using the imperialist competitive algorithm. In temporal contaminant transport modeling, de-noised data enhanced the performance of ANN and ANFIS methods in terms of the determination coefficient, up to 6 and 5%, respectively, in the experimental study and up to 39 and 18%, respectively, in the field study. Results showed that the efficiency of ANFIS-meshless model was more than ANN-meshless model up to 2 and 13% in the experimental and field studies, respectively.

Numerical Upscaling of Solute Transport in Fractured Porous Media Based on Flow Aligned Blocks

Science.gov (United States)

Leube, P.; Nowak, W.; Sanchez-Vila, X.

2013-12-01

High-contrast or fractured-porous media (FPM) pose one of the largest unresolved challenges for simulating large hydrogeological systems. The high contrast in advective transport between fast conduits and low-permeability rock matrix, including complex mass transfer processes, leads to the typical complex characteristics of early bulk arrivals and long tailings. Adequate direct representation of FPM requires enormous numerical resolutions. For large scales, e.g. the catchment scale, and when allowing for uncertainty in the fracture network architecture or in matrix properties, computational costs quickly reach an intractable level. In such cases, multi-scale simulation techniques have become useful tools. They allow decreasing the complexity of models by aggregating and transferring their parameters to coarser scales and so drastically reduce the computational costs. However, these advantages come at a loss of detail and accuracy. In this work, we develop and test a new multi-scale or upscaled modeling approach based on block upscaling. The novelty is that individual blocks are defined by and aligned with the local flow coordinates. We choose a multi-rate mass transfer (MRMT) model to represent the remaining sub-block non-Fickian behavior within these blocks on the coarse scale. To make the scale transition simple and to save computational costs, we capture sub-block features by temporal moments (TM) of block-wise particle arrival times to be matched with the MRMT model. By predicting spatial mass distributions of injected tracers in a synthetic test scenario, our coarse-scale solution matches reasonably well with the corresponding fine-scale reference solution. For predicting higher TM-orders (such as arrival time and effective dispersion), the prediction accuracy steadily decreases. This is compensated to some extent by the MRMT model. If the MRMT model becomes too complex, it loses its effect. We also found that prediction accuracy is sensitive to the choice of

Numerical modelling of two phase flow with hysteresis in heterogeneous porous media

Energy Technology Data Exchange (ETDEWEB)

Abreu, E. [Instituto Nacional de Matematica Pura e Aplicada (IMPA), Rio de Janeiro, RJ (Brazil); Furtado, F.; Pereira, F. [University of Wyoming, Laramie, WY (United States). Dept. of Mathematicsatics; Souza, G. [Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil)

2008-07-01

Numerical simulators are necessary for the understanding of multiphase flow in porous media in order to optimize hydrocarbon recovery. In this work, the immiscible flow of two incompressible phases, a problem very common in waterflooding of petroleum reservoirs, is considered and numerical simulation techniques are presented. The system of equations which describe this type of flow form a coupled, highly nonlinear system of time-dependent partial differential equations (PDEs). The equation for the saturation of the invading fluid is a convection-dominated, degenerate parabolic PDE whose solutions typically exhibit sharp fronts (i.e., internal layers with strong gradients) and is very difficult to approximate numerically. It is well known that accurate modeling of convective and diffusive processes is one of the most daunting tasks in the numerical approximation of PDEs. Particularly difficult is the case where convection dominates diffusion. Specifically, we consider the injection problem for a model of two-phase (water/oil) flow in a core sample of porous rock, taking into account hysteresis effects in the relative permeability of the oil phase. (author)

THC-MP: High performance numerical simulation of reactive transport and multiphase flow in porous media

Science.gov (United States)

Wei, Xiaohui; Li, Weishan; Tian, Hailong; Li, Hongliang; Xu, Haixiao; Xu, Tianfu

2015-07-01

The numerical simulation of multiphase flow and reactive transport in the porous media on complex subsurface problem is a computationally intensive application. To meet the increasingly computational requirements, this paper presents a parallel computing method and architecture. Derived from TOUGHREACT that is a well-established code for simulating subsurface multi-phase flow and reactive transport problems, we developed a high performance computing THC-MP based on massive parallel computer, which extends greatly on the computational capability for the original code. The domain decomposition method was applied to the coupled numerical computing procedure in the THC-MP. We designed the distributed data structure, implemented the data initialization and exchange between the computing nodes and the core solving module using the hybrid parallel iterative and direct solver. Numerical accuracy of the THC-MP was verified through a CO2 injection-induced reactive transport problem by comparing the results obtained from the parallel computing and sequential computing (original code). Execution efficiency and code scalability were examined through field scale carbon sequestration applications on the multicore cluster. The results demonstrate successfully the enhanced performance using the THC-MP on parallel computing facilities.

An implicit numerical model for multicomponent compressible two-phase flow in porous media

Science.gov (United States)

Zidane, Ali; Firoozabadi, Abbas

2015-11-01

We introduce a new implicit approach to model multicomponent compressible two-phase flow in porous media with species transfer between the phases. In the implicit discretization of the species transport equation in our formulation we calculate for the first time the derivative of the molar concentration of component i in phase α (cα, i) with respect to the total molar concentration (ci) under the conditions of a constant volume V and temperature T. The species transport equation is discretized by the finite volume (FV) method. The fluxes are calculated based on powerful features of the mixed finite element (MFE) method which provides the pressure at grid-cell interfaces in addition to the pressure at the grid-cell center. The efficiency of the proposed model is demonstrated by comparing our results with three existing implicit compositional models. Our algorithm has low numerical dispersion despite the fact it is based on first-order space discretization. The proposed algorithm is very robust.

THE EFFECT OF THE PICTORIAL NUMERIC CARD MEDIA TOWARD IMPROVEMENT OF THE SUMMATION COMPUTATION ABILITY FOR STUDENT WITH INTELLECTUAL DISSABILITY

OpenAIRE

Isna Nur Hikmah; Usep Kustiawan

2016-01-01

The reseach’s purpose was to analyze the effect of picture numeric card media toward improvement of the summation computation ability for student with intellectual disability of grade IV in SDLB. Data collected was analyzed with experiment technique and single subject research A-B design. Research result showed that: after being analyzed between condition overlap persentase was 0%. Thus, it could be concluded that there was effect of pictorial numeric card media toward summation computation a...

Numerical Methods for Forward and Inverse Problems in Discontinuous Media

Energy Technology Data Exchange (ETDEWEB)

Chartier, Timothy P.

2011-03-08

The research emphasis under this grant's funding is in the area of algebraic multigrid methods. The research has two main branches: 1) exploring interdisciplinary applications in which algebraic multigrid can make an impact and 2) extending the scope of algebraic multigrid methods with algorithmic improvements that are based in strong analysis.The work in interdisciplinary applications falls primarily in the field of biomedical imaging. Work under this grant demonstrated the effectiveness and robustness of multigrid for solving linear systems that result from highly heterogeneous finite element method models of the human head. The results in this work also give promise to medical advances possible with software that may be developed. Research to extend the scope of algebraic multigrid has been focused in several areas. In collaboration with researchers at the University of Colorado, Lawrence Livermore National Laboratory, and Los Alamos National Laboratory, the PI developed an adaptive multigrid with subcycling via complementary grids. This method has very cheap computing costs per iterate and is showing promise as a preconditioner for conjugate gradient. Recent work with Los Alamos National Laboratory concentrates on developing algorithms that take advantage of the recent advances in adaptive multigrid research. The results of the various efforts in this research could ultimately have direct use and impact to researchers for a wide variety of applications, including, astrophysics, neuroscience, contaminant transport in porous media, bi-domain heart modeling, modeling of tumor growth, and flow in heterogeneous porous media. This work has already led to basic advances in computational mathematics and numerical linear algebra and will continue to do so into the future.

Numerical Simulation of Cylindrical Solitary Waves in Periodic Media

KAUST Repository

Quezada de Luna, Manuel; Ketcheson, David I.

2013-01-01

We study the behavior of nonlinear waves in a two-dimensional medium with density and stress relation that vary periodically in space. Efficient approximate Riemann solvers are developed for the corresponding variable-coefficient first-order hyperbolic system. We present direct numerical simulations of this multiscale problem, focused on the propagation of a single localized perturbation in media with strongly varying impedance. For the conditions studied, we find little evidence of shock formation. Instead, solutions consist primarily of solitary waves. These solitary waves are observed to be stable over long times and to interact in a manner approximately like solitons. The system considered has no dispersive terms; these solitary waves arise due to the material heterogeneity, which leads to strong reflections and effective dispersion.

Numerical Simulation of Cylindrical Solitary Waves in Periodic Media

KAUST Repository

Quezada de Luna, Manuel

2013-07-14

We study the behavior of nonlinear waves in a two-dimensional medium with density and stress relation that vary periodically in space. Efficient approximate Riemann solvers are developed for the corresponding variable-coefficient first-order hyperbolic system. We present direct numerical simulations of this multiscale problem, focused on the propagation of a single localized perturbation in media with strongly varying impedance. For the conditions studied, we find little evidence of shock formation. Instead, solutions consist primarily of solitary waves. These solitary waves are observed to be stable over long times and to interact in a manner approximately like solitons. The system considered has no dispersive terms; these solitary waves arise due to the material heterogeneity, which leads to strong reflections and effective dispersion.

A conservative numerical scheme for modeling nonlinear acoustic propagation in thermoviscous homogeneous media

Science.gov (United States)

Diaz, Manuel A.; Solovchuk, Maxim A.; Sheu, Tony W. H.

2018-06-01

A nonlinear system of partial differential equations capable of describing the nonlinear propagation and attenuation of finite amplitude perturbations in thermoviscous media is presented. This system constitutes a full nonlinear wave model that has been formulated in the conservation form. Initially, this model is investigated analytically in the inviscid limit where it has been found that the resulting flux function fulfills the Lax-Wendroff theorem, and the scheme can match the solutions of the Westervelt and Burgers equations numerically. Here, high-order numerical descriptions of strongly nonlinear wave propagations become of great interest. For that matter we consider finite difference formulations of the weighted essentially non-oscillatory (WENO) schemes associated with explicit strong stability preserving Runge-Kutta (SSP-RK) time integration methods. Although this strategy is known to be computationally demanding, it is found to be effective when implemented to be solved in graphical processing units (GPUs). As we consider wave propagations in unbounded domains, perfectly matching layers (PML) have been also considered in this work. The proposed system model is validated and illustrated by using one- and two-dimensional benchmark test cases proposed in the literature for nonlinear acoustic propagation in homogeneous thermoviscous media.

A numerical study of steady-state two-phase flow in porous media

Energy Technology Data Exchange (ETDEWEB)

Knudsen, Henning Arendt

2002-07-01

pore scale. Although, the possible two-phase flow systems in nature and laboratory differ with respect to the properties of the media and the flowing phases, it is possible to include main features of these systems into a simple model. Thus, having created a simulator on pore scale for these systems, it is possible to use computer power to extract information that is generally valid. The aims of this thesis is to extract such information from numerical simulations. It is important to keep in mind that the conclusions that are presented in the paper section are based on numerical work, and should be verified by experiments. (author)

Numerical modeling of contaminant transport in fractured porous media using mixed finite-element and finitevolume methods

KAUST Repository

Dong, Chen; Sun, Shuyu; Taylor, Glenn A.

2011-01-01

A mathematical model for contaminant species passing through fractured porous media is presented. In the numerical model, we combine two locally conservative methods; i.e., the mixed finite-element (MFE) method and the finite-volume method. Adaptive

THE EFFECT OF THE PICTORIAL NUMERIC CARD MEDIA TOWARD IMPROVEMENT OF THE SUMMATION COMPUTATION ABILITY FOR STUDENT WITH INTELLECTUAL DISSABILITY

Directory of Open Access Journals (Sweden)

Isna Nur Hikmah

2016-12-01

Full Text Available The reseach’s purpose was to analyze the effect of picture numeric card media toward improvement of the summation computation ability for student with intellectual disability of grade IV in SDLB. Data collected was analyzed with experiment technique and single subject research A-B design. Research result showed that: after being analyzed between condition overlap persentase was 0%. Thus, it could be concluded that there was effect of pictorial numeric card media toward summation computation ability of student with intellectual disability

Quantum-dot based nanothermometry in optical plasmonic recording media

International Nuclear Information System (INIS)

Maestro, Laura Martinez; Zhang, Qiming; Li, Xiangping; Gu, Min; Jaque, Daniel

2014-01-01

We report on the direct experimental determination of the temperature increment caused by laser irradiation in a optical recording media constituted by a polymeric film in which gold nanorods have been incorporated. The incorporation of CdSe quantum dots in the recording media allowed for single beam thermal reading of the on-focus temperature from a simple analysis of the two-photon excited fluorescence of quantum dots. Experimental results have been compared with numerical simulations revealing an excellent agreement and opening a promising avenue for further understanding and optimization of optical writing processes and media

A numerical study of capillary and viscous drainage in porous media

Energy Technology Data Exchange (ETDEWEB)

Aker, Eyvind

1999-07-01

Fluid flow in porous media is an important field of study in several contexts, for instance oil recovery and hydrology. This thesis concentrates on the flow properties when one fluid displaces another fluid in a network of pores and throats. It considers the scale where individual pores enter the description. A network model is used to simulate the displacement process. The model describes the pores and throats by means of a square lattice of cylindrical tubes. The thesis examines the interplay between the pressure build up in the fluids and the displacement structure during drainage. The network model is also used to study the stabilisation mechanisms when a stable front develops. It is found, neglecting gravity, that the capillary pressure between two points along the front varies almost linearly as a function of height separation in the direction of the displacement. The thesis presents an alternative view on the displacement process based on the observation that nonwetting fluid flows in separate strands along the front where wetting fluid is displaced. Based on numerical simulations, it is concluded that earlier theories that do not include the effect of nonwetting fluid flowing in strands are incompatible with drainage when strands dominate the displacement process.

Numerical Simulation of Density-Driven Flow and Heat Transport Processes in Porous Media Using the Network Method

Directory of Open Access Journals (Sweden)

Manuel Cánovas

2017-09-01

Full Text Available Density-driven flow and heat transport processes in 2-D porous media scenarios are governed by coupled, non-linear, partial differential equations that normally have to be solved numerically. In the present work, a model based on the network method simulation is designed and applied to simulate these processes, providing steady state patterns that demonstrate its computational power and reliability. The design is relatively simple and needs very few rules. Two applications in which heat is transported by natural convection in confined and saturated media are studied: slender boxes heated from below (a kind of Bénard problem and partially heated horizontal plates in rectangular domains (the Elder problem. The streamfunction and temperature patterns show that the results are coherent with those of other authors: steady state patterns and heat transfer depend both on the Rayleigh number and on the characteristic Darcy velocity derived from the values of the hydrological, thermal and geometrical parameters of the problems.

Numerical simulation of the impact of water-air fronts on radionuclides plumes in heterogeneous media

International Nuclear Information System (INIS)

Aquino, J.; Francisco, A.S.; Pereira, F.; Amaral Souto, H.P.

2004-01-01

The goal of this paper is to investigate the interaction of water-air fronts with radionuclide plumes in unsaturated heterogeneous porous media. This problem is modeled by a system of equations that describes both the water-air flow and the radionuclide transport. The water-air problem is solved numerically by a mixed finite element combined with a non-oscillatory central difference scheme. For the radionuclide transport equation we use the Modified Method of Characteristics (MMOC). We present the results of numerical simulations for heterogeneous permeability fields taking into account sorption effects. (author)

Seismic wave propagation in heterogeneous multiphasic media: numerical modelling, sensibility and inversion of poro-elastic parameters

International Nuclear Information System (INIS)

Dupuy, B.

2011-11-01

Seismic wave propagation in multiphasic porous media have various environmental (natural risks, geotechnics, groundwater pollutions...) and resources (aquifers, oil and gas, CO 2 storage...) issues. When seismic waves are crossing a given material, they are distorted and thus contain information on fluid and solid phases. This work focuses on the characteristics of seismic waves propagating in multiphasic media, from the physical complex description to the parameter characterisation by inversion, including 2D numerical modelling of the wave propagation. The first part consists in the description of the physics of multiphasic media (each phase and their interactions), using several up-scaling methods, in order to obtain an equivalent mesoscale medium defined by seven parameters. Thus, in simple porosity saturated media and in complex media (double porosity, patchy saturation, visco-poro-elasticity), I can compute seismic wave propagation without any approximation. Indeed, I use a frequency-space domain for the numerical method, which allows to consider all the frequency dependent terms. The spatial discretization employs a discontinuous finite elements method (discontinuous Galerkin), which allows to take into account complex interfaces.The computation of the seismic attributes (velocities and attenuations) of complex porous media shows strong variations in respect with the frequency. Waveforms, computed without approximation, are strongly different if we take into account the full description of the medium or an homogenisation by averages. The last part of this work deals with the poro-elastic parameters characterisation by inversion. For this, I develop a two-steps method: the first one consists in a classical inversion (tomography, full waveform inversion) of seismograms data to obtain macro-scale parameters (seismic attributes). The second step allows to recover, from the macro-scale parameters, the poro-elastic micro-scale properties. This down-scaling step

Media approach to gender-based violence

Directory of Open Access Journals (Sweden)

Mršević Zorica

2012-01-01

Full Text Available The author grounds her research and the latter analysis on continually conducted daily press-clipping of seven main printed daily newspapers and two main electronic media in Serbia, within the three years period (2009 - 2011. An analysis of media reports on gender based violence, with particular focus on the most frequent domestic violence cases within the two years period, 2010 to 2011 is presented. As the best of media reports on gender based violence, the author stressed out its „whistle blower“ role - media are the main source of information on cases, dimensions and forms of gender based violence. Also the worse moments of media reporting in the mentioned period are presented - when the violence was justified or when reality is deformed by presenting these cases as romantic love stories. For example, in 2010 the worst was reporting on the „Pajčin/Kapisoda“ case, while in 2011 it was the „Ponjiger“ case. In the end, the author also warned on the worrysome fact of sudden dissapearance of media reports on partners’ murdering their wives after the last such report published in mid-october 2011, which could mean that now we have a new problem of diminished freedom of media.

Solution of stochastic media transport problems using a numerical quadrature-based method

International Nuclear Information System (INIS)

Pautz, S. D.; Franke, B. C.; Prinja, A. K.; Olson, A. J.

2013-01-01

We present a new conceptual framework for analyzing transport problems in random media. We decompose such problems into stratified subproblems according to the number of material pseudo-interfaces within realizations. For a given subproblem we assign pseudo-interface locations in each realization according to product quadrature rules, which allows us to deterministically generate a fixed number of realizations. Quadrature integration of the solutions of these realizations thus approximately solves each subproblem; the weighted superposition of solutions of the subproblems approximately solves the general stochastic media transport problem. We revisit some benchmark problems to determine the accuracy and efficiency of this approach in comparison to randomly generated realizations. We find that this method is very accurate and fast when the number of pseudo-interfaces in a problem is generally low, but that these advantages quickly degrade as the number of pseudo-interfaces increases. (authors)

Matrix-oriented implementation for the numerical solution of the partial differential equations governing flows and transport in porous media

KAUST Repository

Sun, Shuyu

2012-09-01

In this paper we introduce a new technique for the numerical solution of the various partial differential equations governing flow and transport phenomena in porous media. This method is proposed to be used in high level programming languages like MATLAB, Python, etc., which show to be more efficient for certain mathematical operations than for others. The proposed technique utilizes those operations in which these programming languages are efficient the most and keeps away as much as possible from those inefficient, time-consuming operations. In particular, this technique is based on the minimization of using multiple indices looping operations by reshaping the unknown variables into one-dimensional column vectors and performing the numerical operations using shifting matrices. The cell-centered information as well as the face-centered information are shifted to the adjacent face-center and cell-center, respectively. This enables the difference equations to be done for all the cells at once using matrix operations rather than within loops. Furthermore, for results post-processing, the face-center information can further be mapped to the physical grid nodes for contour plotting and stream lines constructions. In this work we apply this technique to flow and transport phenomena in porous media. © 2012 Elsevier Ltd.

Water transport in gas diffusion media for PEM fuel cells. Experimental and numerical investigation

Energy Technology Data Exchange (ETDEWEB)

Roth, Joerg

2010-08-20

The water flux in partially saturated hydrophobic carbon fibre paper for polymer electrolyte membrane fuel cell applications is investigated and compared with the frequently used constitutive two-phase flow model based on Darcy's law. Further, the first steps towards a math-based material design for gas diffusion media are explored in this thesis. Two self-developed ex-situ experiments to investigate the liquid water transport are introduced. The first is a newly developed buoyancy-based measurement of the pressuresaturation relationship on thin porous material with an accuracy of 0.5 kPa for the pressure and {+-} 5% for the saturation. The second experiment measures the pressure drop in dependence of flow rates down to magnitudes of {mu}L/s across the partially saturated thin porous material. This flow rate is relevant for the fuel cell application. The liquid water transport through Toray 060 carbon fibre paper, impregnated with 7% and 10% PTFE is investigated at wet and dry boundary conditions. The experiments are also accompanied by analytical and numerical free surface modelling with the consideration of the material morphology and liquid-solid interaction. The imbibing and draining cases of an arrangement of six fibres at varying solid-liquid interaction and boundary conditions are studied with 'Surface Evolver'. In order to evaluate the findings of ex-situ and modelling work for applicability to water transport in fuel cell operation, the technique of nuclear magnetic resonance (NMR) imaging is assessed. The focus is on the visualisation of 2D and 3D water distribution in the operating fuel cell. The compatibility of the NMR experiment with fuel cell operation in relation to material selection, operating temperature, and current density is addressed. NMR imaging is employed for different current densities, stoichiometries, and fuel cell arrangements. The fuel cell arrangements differ by the cathode diffusion medium. Plain, hydrophobic, and

OpenGeoSys: An open-source initiative for numerical simulation of thermo-hydro-mechanical/chemical (THM/C) processes in porous media

DEFF Research Database (Denmark)

Kolditz, O.; Bauer, S.; Bilke, L.

In this paper we describe the OpenGeoSys (OGS) project, which is a scientific open-source initiative for numerical simulation of thermo-hydro-mechanical/chemical processes in porous media. The basic concept is to provide a flexible numerical framework (using primarily the Finite Element Method (FEM...

Territoriality and Consumption Behaviour with Location-based Media

DEFF Research Database (Denmark)

Tussyadiah, Iis

2012-01-01

The development in location-based mobile media has led to the popularity of its use for place experiences. This study explored the concept of territoriality, which is suggested as the underlying human behaviour that influences consumers’ mobility and experience stimulated by the social gaming...... feature of location-based media. From an exploratory investigation with a series of focus group discussions with users of location-based media, this study observed the activities of territorial tagging for the purposes of territorial claim and defence to gain and maintain the perceived territorial control...... over resources and rewards attached to certain places. The ability of location-based media to make the physical territory to interact with informational devices enables territorial behaviour to manifest in the consumption of local establishments, making location-based media a powerful tool...

A residual-based a posteriori error estimator for single-phase Darcy flow in fractured porous media

KAUST Repository

Chen, Huangxin

2016-12-09

In this paper we develop an a posteriori error estimator for a mixed finite element method for single-phase Darcy flow in a two-dimensional fractured porous media. The discrete fracture model is applied to model the fractures by one-dimensional fractures in a two-dimensional domain. We consider Raviart–Thomas mixed finite element method for the approximation of the coupled Darcy flows in the fractures and the surrounding porous media. We derive a robust residual-based a posteriori error estimator for the problem with non-intersecting fractures. The reliability and efficiency of the a posteriori error estimator are established for the error measured in an energy norm. Numerical results verifying the robustness of the proposed a posteriori error estimator are given. Moreover, our numerical results indicate that the a posteriori error estimator also works well for the problem with intersecting fractures.

A numerical study of transient mass transport through a circular hole connecting two semi-infinite media

International Nuclear Information System (INIS)

DePaoli, D.W.; Scott, T.C.

1993-01-01

A numerical model of transient diffusive mass transfer through a circular hole that connects two semi-infinite media was used as a means of determining potential effects of waste container penetrations on the release of immobilized contaminants into the environment. The finite difference model as developed necessarily includes treatment of mass transport in both the waste and surrounding medium and allows calculation of release rates for cases with and without preferential adsorption and differing diffusivities of the two media. The dimensionless contaminant release rate was found to vary over several orders of magnitude depending on the product of the ratio of the distribution coefficient and the media diffusivities only. As would be intuitively expected, partitioning favoring the surrounding medium and higher relative waste medium diffusivity cause higher transport rates. There was definitely no unexpected enhancement in the release rate in the case of perforations over that of an uncontained waste form

Image-based modeling of flow and reactive transport in porous media

Science.gov (United States)

Qin, Chao-Zhong; Hoang, Tuong; Verhoosel, Clemens V.; Harald van Brummelen, E.; Wijshoff, Herman M. A.

2017-04-01

Due to the availability of powerful computational resources and high-resolution acquisition of material structures, image-based modeling has become an important tool in studying pore-scale flow and transport processes in porous media [Scheibe et al., 2015]. It is also playing an important role in the upscaling study for developing macroscale porous media models. Usually, the pore structure of a porous medium is directly discretized by the voxels obtained from visualization techniques (e.g. micro CT scanning), which can avoid the complex generation of computational mesh. However, this discretization may considerably overestimate the interfacial areas between solid walls and pore spaces. As a result, it could impact the numerical predictions of reactive transport and immiscible two-phase flow. In this work, two types of image-based models are used to study single-phase flow and reactive transport in a porous medium of sintered glass beads. One model is from a well-established voxel-based simulation tool. The other is based on the mixed isogeometric finite cell method [Hoang et al., 2016], which has been implemented in the open source Nutils (http://www.nutils.org). The finite cell method can be used in combination with isogeometric analysis to enable the higher-order discretization of problems on complex volumetric domains. A particularly interesting application of this immersed simulation technique is image-based analysis, where the geometry is smoothly approximated by segmentation of a B-spline level set approximation of scan data [Verhoosel et al., 2015]. Through a number of case studies by the two models, we will show the advantages and disadvantages of each model in modeling single-phase flow and reactive transport in porous media. Particularly, we will highlight the importance of preserving high-resolution interfaces between solid walls and pore spaces in image-based modeling of porous media. References Hoang, T., C. V. Verhoosel, F. Auricchio, E. H. van

A numerical homogenization method for heterogeneous, anisotropic elastic media based on multiscale theory

KAUST Repository

Gao, Kai; Chung, Eric T.; Gibson, Richard L.; Fu, Shubin; Efendiev, Yalchin R.

2015-01-01

The development of reliable methods for upscaling fine-scale models of elastic media has long been an important topic for rock physics and applied seismology. Several effective medium theories have been developed to provide elastic parameters

Finger-Based Numerical Skills Link Fine Motor Skills to Numerical Development in Preschoolers.

Science.gov (United States)

Suggate, Sebastian; Stoeger, Heidrun; Fischer, Ursula

2017-12-01

Previous studies investigating the association between fine-motor skills (FMS) and mathematical skills have lacked specificity. In this study, we test whether an FMS link to numerical skills is due to the involvement of finger representations in early mathematics. We gave 81 pre-schoolers (mean age of 4 years, 9 months) a set of FMS measures and numerical tasks with and without a specific finger focus. Additionally, we used receptive vocabulary and chronological age as control measures. FMS linked more closely to finger-based than to nonfinger-based numerical skills even after accounting for the control variables. Moreover, the relationship between FMS and numerical skill was entirely mediated by finger-based numerical skills. We concluded that FMS are closely related to early numerical skill development through finger-based numerical counting that aids the acquisition of mathematical mental representations.

Semantic-based framework for personalised ambient media

NARCIS (Netherlands)

Aroyo, L.M.; Bellekens, P.; Björkman, M.; Houben, G.J

2008-01-01

The paper proposes a semantic-based metadata framework for personalised interaction with TV media in a connected home context. Our approach allows the current home media centres to go beyond the simple concept of electronic programme guides and to offer the users a personalised media experience in

Development of Numerical Technique to Analyze the Flow Characteristics of Porous Media Using Lattice Boltzmann Method

Energy Technology Data Exchange (ETDEWEB)

Kim, Hyung Min [Kyonggi Univ., Suwon (Korea, Republic of)

2016-11-15

The performance of proton exchange membrane fuel cells (PEMFC) is strongly related to the water flow and accumulation in the gas diffusion layer (GDL) and catalyst layer. Understanding the behavior of fluid from the characteristics of the media is crucial for the improvement of the performance and design of the GDL. In this paper, a numerical method is proposed to calculate the design parameters of the GDL, i.e., permeability, tortuosity, and effective diffusivity. The fluid flow in a channel filled with randomly packed hard spheres is simulated to validate the method. The flow simulation was performed by lattice Boltzmann method with bounce back condition for the solid volume fraction in the porous media, with different values of porosities. Permeability, which affects the flow, was calculated from the average pressure drop and the velocity in the porous media. Tortuosity, calculated by the ratio the average path length of the randomly injected massless particles to the thickness of the porous media, and the resultant effective diffusivity were in good agreement with the theoretical model. The suggested method can be used to calculate the parameters of real GDL accurately without any modification.

Matrix-oriented implementation for the numerical solution of the partial differential equations governing flows and transport in porous media

KAUST Repository

Sun, Shuyu; Salama, Amgad; El-Amin, Mohamed

2012-01-01

In this paper we introduce a new technique for the numerical solution of the various partial differential equations governing flow and transport phenomena in porous media. This method is proposed to be used in high level programming languages like

FOLDER: A numerical tool to simulate the development of structures in layered media

Science.gov (United States)

Adamuszek, Marta; Dabrowski, Marcin; Schmid, Daniel W.

2015-04-01

FOLDER is a numerical toolbox for modelling deformation in layered media during layer parallel shortening or extension in two dimensions. FOLDER builds on MILAMIN [1], a finite element method based mechanical solver, with a range of utilities included from the MUTILS package [2]. Numerical mesh is generated using the Triangle software [3]. The toolbox includes features that allow for: 1) designing complex structures such as multi-layer stacks, 2) accurately simulating large-strain deformation of linear and non-linear viscous materials, 3) post-processing of various physical fields such as velocity (total and perturbing), rate of deformation, finite strain, stress, deviatoric stress, pressure, apparent viscosity. FOLDER is designed to ensure maximum flexibility to configure model geometry, define material parameters, specify range of numerical parameters in simulations and choose the plotting options. FOLDER is an open source MATLAB application and comes with a user friendly graphical interface. The toolbox additionally comprises an educational application that illustrates various analytical solutions of growth rates calculated for the cases of folding and necking of a single layer with interfaces perturbed with a single sinusoidal waveform. We further derive two novel analytical expressions for the growth rate in the cases of folding and necking of a linear viscous layer embedded in a linear viscous medium of a finite thickness. We use FOLDER to test the accuracy of single-layer folding simulations using various 1) spatial and temporal resolutions, 2) time integration schemes, and 3) iterative algorithms for non-linear materials. The accuracy of the numerical results is quantified by: 1) comparing them to analytical solution, if available, or 2) running convergence tests. As a result, we provide a map of the most optimal choice of grid size, time step, and number of iterations to keep the results of the numerical simulations below a given error for a given time

Numerical investigations of two-phase flow with dynamic capillary pressure in porous media via a moving mesh method

Science.gov (United States)

Zhang, Hong; Zegeling, Paul Andries

2017-09-01

Motivated by observations of saturation overshoot, this paper investigates numerical modeling of two-phase flow in porous media incorporating dynamic capillary pressure. The effects of the dynamic capillary coefficient, the infiltrating flux rate and the initial and boundary values are systematically studied using a traveling wave ansatz and efficient numerical methods. The traveling wave solutions may exhibit monotonic, non-monotonic or plateau-shaped behavior. Special attention is paid to the non-monotonic profiles. The traveling wave results are confirmed by numerically solving the partial differential equation using an accurate adaptive moving mesh solver. Comparisons between the computed solutions using the Brooks-Corey model and the laboratory measurements of saturation overshoot verify the effectiveness of our approach.

Media Culture 2020: Collaborative Teaching and Blended Learning Using Social Media and Cloud-Based Technologies

Science.gov (United States)

Vickers, Richard; Field, James; Melakoski, Cai

2015-01-01

In 2013 five universities from across Europe undertook an innovative project "Media Culture 2020", combining skills and forces to develop new practices that would face the challenge of the convergence of digital media, taking full advantage of social media and cloud-based technologies. The aim of the Media Culture 2020 project was to…

A modeling and numerical algorithm for thermoporomechanics in multiple porosity media for naturally fractured reservoirs

Science.gov (United States)

Kim, J.; Sonnenthal, E. L.; Rutqvist, J.

2011-12-01

Rigorous modeling of coupling between fluid, heat, and geomechanics (thermo-poro-mechanics), in fractured porous media is one of the important and difficult topics in geothermal reservoir simulation, because the physics are highly nonlinear and strongly coupled. Coupled fluid/heat flow and geomechanics are investigated using the multiple interacting continua (MINC) method as applied to naturally fractured media. In this study, we generalize constitutive relations for the isothermal elastic dual porosity model proposed by Berryman (2002) to those for the non-isothermal elastic/elastoplastic multiple porosity model, and derive the coupling coefficients of coupled fluid/heat flow and geomechanics and constraints of the coefficients. When the off-diagonal terms of the total compressibility matrix for the flow problem are zero, the upscaled drained bulk modulus for geomechanics becomes the harmonic average of drained bulk moduli of the multiple continua. In this case, the drained elastic/elastoplastic moduli for mechanics are determined by a combination of the drained moduli and volume fractions in multiple porosity materials. We also determine a relation between local strains of all multiple porosity materials in a gridblock and the global strain of the gridblock, from which we can track local and global elastic/plastic variables. For elastoplasticity, the return mapping is performed for all multiple porosity materials in the gridblock. For numerical implementation, we employ and extend the fixed-stress sequential method of the single porosity model to coupled fluid/heat flow and geomechanics in multiple porosity systems, because it provides numerical stability and high accuracy. This sequential scheme can be easily implemented by using a porosity function and its corresponding porosity correction, making use of the existing robust flow and geomechanics simulators. We implemented the proposed modeling and numerical algorithm to the reaction transport simulator

A numerical method for a model of two-phase flow in a coupled free flow and porous media system

KAUST Repository

Chen, Jie; Sun, Shuyu; Wang, Xiaoping

2014-01-01

In this article, we study two-phase fluid flow in coupled free flow and porous media regions. The model consists of coupled Cahn-Hilliard and Navier-Stokes equations in the free fluid region and the two-phase Darcy law in the porous medium region. We propose a Robin-Robin domain decomposition method for the coupled Navier-Stokes and Darcy system with the generalized Beavers-Joseph-Saffman condition on the interface between the free flow and the porous media regions. Numerical examples are presented to illustrate the effectiveness of this method. © 2014 Elsevier Inc.

A numerical method for a model of two-phase flow in a coupled free flow and porous media system

KAUST Repository

Chen, Jie

2014-07-01

In this article, we study two-phase fluid flow in coupled free flow and porous media regions. The model consists of coupled Cahn-Hilliard and Navier-Stokes equations in the free fluid region and the two-phase Darcy law in the porous medium region. We propose a Robin-Robin domain decomposition method for the coupled Navier-Stokes and Darcy system with the generalized Beavers-Joseph-Saffman condition on the interface between the free flow and the porous media regions. Numerical examples are presented to illustrate the effectiveness of this method. © 2014 Elsevier Inc.

Nephrogenic systemic fibrosis and gadolinium-based contrast media

DEFF Research Database (Denmark)

Thomsen, Henrik S; Morcos, Sameh K; Almén, Torsten

2012-01-01

PURPOSE: To update the guidelines of the Contrast Media Safety Committee (CMSC) of the European Society of Urogenital Radiology (ESUR) on nephrogenic systemic fibrosis and gadolinium-based contrast media. AREAS COVERED: Topics reviewed include the history, clinical features and prevalence of neph...... guidelines regarding gadolinium contrast agents minimises the risk of NSF • Potential long-term harm from gadolinium accumulation in the body is discussed.......PURPOSE: To update the guidelines of the Contrast Media Safety Committee (CMSC) of the European Society of Urogenital Radiology (ESUR) on nephrogenic systemic fibrosis and gadolinium-based contrast media. AREAS COVERED: Topics reviewed include the history, clinical features and prevalence...... of nephrogenic systemic fibrosis and the current understanding of its pathophysiology. The risk factors for NSF are discussed and prophylactic measures are recommended. The stability of the different gadolinium-based contrast media and the potential long-term effects of gadolinium in the body have also been...

Numerical Study of Frequency-dependent Seismoelectric Coupling in Partially-saturated Porous Media

Directory of Open Access Journals (Sweden)

Djuraev Ulugbek

2017-01-01

Full Text Available The seismoelectric phenomenon associated with propagation of seismic waves in fluid-saturated porous media has been studied for many decades. The method has a great potential to monitor subsurface fluid saturation changes associated with production of hydrocarbons. Frequency of the seismic source has a significant impact on measurement of the seismoelectric effects. In this paper, the effects of seismic wave frequency and water saturation on the seismoelectric response of a partially-saturated porous media is studied numerically. The conversion of seismic wave to electromagnetic wave was modelled by extending the theoretically developed seismoelectric coupling coefficient equation. We assumed constant values of pore radius and zeta-potential of 80 micrometers and 48 microvolts, respectively. Our calculations of the coupling coefficient were conducted at various water saturation values in the frequency range of 10 kHz to 150 kHz. The results show that the seismoelectric coupling is frequency-dependent and decreases exponentially when frequency increases. Similar trend is seen when water saturation is varied at different frequencies. However, when water saturation is less than about 0.6, the effect of frequency is significant. On the other hand, when the water saturation is greater than 0.6, the coupling coefficient shows monotonous trend when water saturation is increased at constant frequency.

Social media management and media environment

Directory of Open Access Journals (Sweden)

Šiđanin Iva

2012-01-01

Full Text Available The paper deals with the system of services that social media management can offer to a variety of users. As social media systems are emerging, social media management can strengthen teams in social media and help to manage numerous social channels and distribution of social information from one place. Social media management is a system of procedures that are used to manage the flow of information in the environment of social media. This involves connecting with social media like Facebook, Twitter, LinkedIn, Plaxo, Ecademy, YouTube and many others, then the aggregation and management of social data. Social media management services are analysed through various fields, such as managing multiple social media profiles, mail scheduling and filtering, reporting and analytics. Social media management enables managing personal business through social media, which contributes to a significant reduction in expenditures. The paper also discusses the importance of social media management in marketing activities and various forms of social promotion, which allow companies to easily reach their customers.

DEVELOPMENT OF A WEB-BASED PROXIMITY BASED MEDIA SHARING APPLICATION

OpenAIRE

Erol Ozan

2016-01-01

This article reports the development of Vissou, which is a location based web application that enables media recording and sharing among users who are in close proximity to each other. The application facilitates the automated hand-over of the recorded media files from one user to another. There are many social networking applications and web sites that provide digital media sharing and editing functionalities. What differentiates Vissou from other similar applications is the functions and us...

Managing Media: Segmenting Media Through Consumer Expectancies

Directory of Open Access Journals (Sweden)

Matt Eastin

2014-04-01

Full Text Available It has long been understood that consumers are motivated to media differently. However, given the lack of comparative model analysis, this assumption is without empirical validation, and thus, the orientation of segmentation from a media management perspective is without motivational grounds. Thus, evolving the literature on media consumption, the current study develops and compares models of media segmentation within the context of use. From this study, six models of media expectancies were constructed so that motivational differences between media (i.e., local and national newspapers, network and cable television, radio, and Internet could be observed. Utilizing higher order statistical analyses the data indicates differences across a model comparison approach for media motivations. Furthermore, these differences vary across numerous demographic factors. Results afford theoretical advancement within the literature of consumer media consumption as well as provide media planners’ insight into consumer choices.

Self-focusing in uniaxial gyrotropic media. Qualitative and numerical investigation

DEFF Research Database (Denmark)

Karpman, V.I.; Shagalov, A.G.

1992-01-01

We consider the self-focusing in uniaxial gyrotropic media at axially symmetric geometry, i.e., when the wave beam and the gyration vector g are parallel to the principal axis. Dissipation is neglected and the nonlinearity is of the Kerr type. It is shown that when g is directed along the wave no...... beam is formed. The results obtained are beyond the theory based on the nonlinear Schrodinger equation....

An Equation-Type Approach for the Numerical Solution of the Partial Differential Equations Governing Transport Phenomena in Porous Media

KAUST Repository

Sun, Shuyu

2012-06-02

A new technique for the numerical solution of the partial differential equations governing transport phenomena in porous media is introduced. In this technique, the governing equations as depicted from the physics of the problem are used without extra manipulations. In other words, there is no need to reduce the number of governing equations by some sort of mathematical manipulations. This technique enables the separation of the physics part of the problem and the solver part, which makes coding more robust and could be used in several other applications with little or no modifications (e.g., multi-phase flow in porous media). In this method, one abandons the need to construct the coefficient matrix for the pressure equation. Alternatively, the coefficients are automatically generated within the solver routine. We show examples of using this technique to solving several flow problems in porous media.

An Equation-Type Approach for the Numerical Solution of the Partial Differential Equations Governing Transport Phenomena in Porous Media

KAUST Repository

Sun, Shuyu; Salama, Amgad; El-Amin, Mohamed

2012-01-01

A new technique for the numerical solution of the partial differential equations governing transport phenomena in porous media is introduced. In this technique, the governing equations as depicted from the physics of the problem are used without extra manipulations. In other words, there is no need to reduce the number of governing equations by some sort of mathematical manipulations. This technique enables the separation of the physics part of the problem and the solver part, which makes coding more robust and could be used in several other applications with little or no modifications (e.g., multi-phase flow in porous media). In this method, one abandons the need to construct the coefficient matrix for the pressure equation. Alternatively, the coefficients are automatically generated within the solver routine. We show examples of using this technique to solving several flow problems in porous media.

PERANCANGAN WEB BASED LEARNING SEBAGAI MEDIA PEMBELAJARAN BERBASIS ICT

OpenAIRE

Ricky Firmansyah; Iis Saidah

2016-01-01

ABSTRACT The media is very important component of communication process. The effectiveness of media is very influential on extent to which a communication role will be accepted by the audience with fast and precise, or vice versa. E-Learning is present as ICT based learning media that allows students and teachers interact in different places. Web Based Learning (WBL) is used as one part of the E-Learning. This study focuses on designing web-based ICT as a learning medium that is used for ...

Upscaling of Constitutive Relations In Unsaturated Heterogeneous Porous Media

International Nuclear Information System (INIS)

Liu, H. H.; Bodvarsson, G. S.

2001-01-01

When numerical model are used for modeling field scale flow and transport processes in the subsurface, the problem of ''upscaling'' arises. Typical scales, corresponding to spatial resolutions of subsurface heterogeneity in numerical models, are generally much larger than the measurement scale of the parameters and physical processes involved. The upscaling problems is, then, one of assigning parameters to gridblock scale based on parameter values measured on small scales. The focus of this study is to develop an approach to determine large-scale (upscaled) constitutive relations (relationships among relative permeability, capillary pressure and saturation) from small-scale measurements for porous media for a range of air entry values that are typical for the tuff matrix in the unsaturated zone of Yucca Mountain. For porous media with large air entry values, capillary forces play a key role in determining spatial water distribution at large-scales. Therefore, a relatively uniform capillary pressure approximately exists even for a large gridblock scale under steady state flow conditions. Based on these reasoning, we developed formulations that relate upscaled constitutive relations to ones measured at core-scale. Numerical experiments with stochastically generated heterogeneous porous media were used to evaluate the upscaling formulations

High-order dynamic lattice method for seismic simulation in anisotropic media

Science.gov (United States)

Hu, Xiaolin; Jia, Xiaofeng

2018-03-01

The discrete particle-based dynamic lattice method (DLM) offers an approach to simulate elastic wave propagation in anisotropic media by calculating the anisotropic micromechanical interactions between these particles based on the directions of the bonds that connect them in the lattice. To build such a lattice, the media are discretized into particles. This discretization inevitably leads to numerical dispersion. The basic lattice unit used in the original DLM only includes interactions between the central particle and its nearest neighbours; therefore, it represents the first-order form of a particle lattice. The first-order lattice suffers from numerical dispersion compared with other numerical methods, such as high-order finite-difference methods, in terms of seismic wave simulation. Due to its unique way of discretizing the media, the particle-based DLM no longer solves elastic wave equations; this means that one cannot build a high-order DLM by simply creating a high-order discrete operator to better approximate a partial derivative operator. To build a high-order DLM, we carry out a thorough dispersion analysis of the method and discover that by adding more neighbouring particles into the lattice unit, the DLM will yield different spatial accuracy. According to the dispersion analysis, the high-order DLM presented here can adapt the requirement of spatial accuracy for seismic wave simulations. For any given spatial accuracy, we can design a corresponding high-order lattice unit to satisfy the accuracy requirement. Numerical tests show that the high-order DLM improves the accuracy of elastic wave simulation in anisotropic media.

Numerical simulation of two-phase multicomponent flow with reactive transport in porous media

International Nuclear Information System (INIS)

Vostrikov, Viatcheslav

2014-01-01

The subject of this thesis is the numerical simulation of water-gas flow in the subsurface together with chemical reactions. The subject has applications to various situations in environmental modeling, though we are mainly concerned with CO 2 storage in deep saline aquifers. In Carbon Capture and Storage studies, CO 2 is first captured from its sources of origin, transport in liquefied form and injected as gas under high pressure in deep saline aquifers. Numerical simulation is an essential tool to make sure that gaseous CO 2 will remain trapped for several hundreds or thousands of years. Several trapping mechanisms can be brought to bear to achieve this goal. Of particular interest in this thesis are solubility trapping (whereby gaseous CO 2 dissolves in the brine as it moves upward) and, on a longer term, mineral trapping (which causes CO 2 to react with the surrounding rock to form minerals such as calcite). Thus, understanding how CO 2 reacts chemically becomes an important issue for its long term fate. The thesis is composed of four chapters. The first chapter is an introduction to multicomponent two-phase flow in porous media, with or without chemical reactions. It presents a review of the existing literature, and gives an outline of the whole thesis. Chapter 2 presents a quantitative discussion of the physical and chemical phenomena involved, and of their mathematical modeling. The model we use is that of two-phase two-component flow in porous media, coupled to reactive transport. This model leads to a large set of partial differential equations, coupled to algebraic equations, describing the evolution of the concentration of each species at each grid point. A direct solution of this problem (a fully coupled solution) is possible, but presents many difficulties form the numerical point of view. Moreover, it makes it difficult to reuse codes already written, and validated, to simulate the simpler phenomena of (uncoupled) two-phase flow and reactive transport

Demographic-Based Content Analysis of Web-Based Health-Related Social Media.

Science.gov (United States)

Sadah, Shouq A; Shahbazi, Moloud; Wiley, Matthew T; Hristidis, Vagelis

2016-06-13

An increasing number of patients from diverse demographic groups share and search for health-related information on Web-based social media. However, little is known about the content of the posted information with respect to the users' demographics. The aims of this study were to analyze the content of Web-based health-related social media based on users' demographics to identify which health topics are discussed in which social media by which demographic groups and to help guide educational and research activities. We analyze 3 different types of health-related social media: (1) general Web-based social networks Twitter and Google+; (2) drug review websites; and (3) health Web forums, with a total of about 6 million users and 20 million posts. We analyzed the content of these posts based on the demographic group of their authors, in terms of sentiment and emotion, top distinctive terms, and top medical concepts. The results of this study are: (1) Pregnancy is the dominant topic for female users in drug review websites and health Web forums, whereas for male users, it is cardiac problems, HIV, and back pain, but this is not the case for Twitter; (2) younger users (0-17 years) mainly talk about attention-deficit hyperactivity disorder (ADHD) and depression-related drugs, users aged 35-44 years discuss about multiple sclerosis (MS) drugs, and middle-aged users (45-64 years) talk about alcohol and smoking; (3) users from the Northeast United States talk about physical disorders, whereas users from the West United States talk about mental disorders and addictive behaviors; (4) Users with higher writing level express less anger in their posts. We studied the popular topics and the sentiment based on users' demographics in Web-based health-related social media. Our results provide valuable information, which can help create targeted and effective educational campaigns and guide experts to reach the right users on Web-based social chatter.

Numerical study of steady/unsteady flow and heat transfer in porous media using a characteristics-based matrix-free implicit FV method on unstructured grids

International Nuclear Information System (INIS)

Chiem, Kok Siong; Zhao Yong

2004-01-01

In this study, a high-resolution characteristic-based finite-volume (FV) method on unstructured grids [Int. J. Numer. Method Eng. 50 (2001) 11; Int. J. Heat Fluid Flow 21 (2000) 432] is extended by a matrix-free implicit dual-time stepping scheme for the numerical simulation of steady and unsteady flow and heat transfer with porous media. The method has been used to study the characteristics of a complex problem: flow and heat transfer in a channel with multiple discrete porous blocks, which was originally proposed by Huang and Vafai [J. Thermophys. Heat Transfer 8 (3) (1994) 563]. In addition, flow and heat transfer in a channel partially or fully filled with porous layers and containing solid protruding blocks with constant heat flux on its lower surface are also investigated in details. Hydrodynamic and heat transfer results are reported for both steady and transient flow cases. In particular, the effects of Darcy and Reynolds numbers on heat transfer augmentation and pressure loss are studied. An in-depth discussion of the formation and variation of recirculation is presented and the existence of optimum porous insert is demonstrated. At high Reynolds numbers the flow in the porous channel exhibits a cyclic characteristics although unlike the non-porous channel flow, the cyclic vortex development is only restricted to a small area behind the last solid block, while temperature changes more slowly and does not exhibit cyclic variations over a long period of time. It is shown that for all the cases studied altering some parametric values can have significant and interesting effects on both flow pattern as well as heat transfer characteristics

An iterative fast sweeping based eikonal solver for tilted orthorhombic media

KAUST Repository

Waheed, Umair bin

2014-08-01

Computing first-arrival traveltimes of quasi-P waves in the presence of anisotropy is important for high-end near-surface modeling, microseismic-source localization, and fractured-reservoir characterization, and requires solving an anisotropic eikonal equation. Anisotropy deviating from elliptical anisotropy introduces higher-order nonlinearity into the eikonal equation, which makes solving the eikonal equation a challenge. We address this challenge by iteratively solving a sequence of simpler tilted elliptically anisotropic eikonal equations. At each iteration, the source function is updated to capture the effects of the higher order nonlinear terms. We use Aitken extrapolation to speed up the convergence rate of the iterative algorithm. The result is an algorithm for first-arrival traveltime computations in tilted anisotropic media. We demonstrate our method on tilted transversely isotropic media and tilted orthorhombic media. Our numerical tests demonstrate that the proposed method can match the first arrivals obtained by wavefield extrapolation, even for strong anisotropy and complex structures. Therefore, for the cases where oneor two-point ray tracing fails, our method may be a potential substitute for computing traveltimes. Our approach can be extended to anisotropic media with lower symmetries, such as monoclinic or even triclinic media.

An iterative fast sweeping based eikonal solver for tilted orthorhombic media

KAUST Repository

Waheed, Umair bin; Yarman, Can Evren; Flagg, Garret

2014-01-01

Computing first-arrival traveltimes of quasi-P waves in the presence of anisotropy is important for high-end near-surface modeling, microseismic-source localization, and fractured-reservoir characterization, and requires solving an anisotropic eikonal equation. Anisotropy deviating from elliptical anisotropy introduces higher-order nonlinearity into the eikonal equation, which makes solving the eikonal equation a challenge. We address this challenge by iteratively solving a sequence of simpler tilted elliptically anisotropic eikonal equations. At each iteration, the source function is updated to capture the effects of the higher order nonlinear terms. We use Aitken extrapolation to speed up the convergence rate of the iterative algorithm. The result is an algorithm for first-arrival traveltime computations in tilted anisotropic media. We demonstrate our method on tilted transversely isotropic media and tilted orthorhombic media. Our numerical tests demonstrate that the proposed method can match the first arrivals obtained by wavefield extrapolation, even for strong anisotropy and complex structures. Therefore, for the cases where oneor two-point ray tracing fails, our method may be a potential substitute for computing traveltimes. Our approach can be extended to anisotropic media with lower symmetries, such as monoclinic or even triclinic media.

Prospects and challenges for social media data in conservation science

Directory of Open Access Journals (Sweden)

Enrico eDi Minin

2015-09-01

Full Text Available Social media data have been extensively used in numerous fields of science, but examples of their use in conservation science are still very limited. In this paper, we propose a framework on how social media data could be useful for conservation science and practice. We present the commonly used social media platforms and discuss how their content could be providing new data and information for conservation science. Based on this, we discuss how future work in conservation science and practice would benefit from social media data.

A stable high-order perturbation of surfaces method for numerical simulation of diffraction problems in triply layered media

Energy Technology Data Exchange (ETDEWEB)

Hong, Youngjoon, E-mail: hongy@uic.edu; Nicholls, David P., E-mail: davidn@uic.edu

2017-02-01

The accurate numerical simulation of linear waves interacting with periodic layered media is a crucial capability in engineering applications. In this contribution we study the stable and high-order accurate numerical simulation of the interaction of linear, time-harmonic waves with a periodic, triply layered medium with irregular interfaces. In contrast with volumetric approaches, High-Order Perturbation of Surfaces (HOPS) algorithms are inexpensive interfacial methods which rapidly and recursively estimate scattering returns by perturbation of the interface shape. In comparison with Boundary Integral/Element Methods, the stable HOPS algorithm we describe here does not require specialized quadrature rules, periodization strategies, or the solution of dense non-symmetric positive definite linear systems. In addition, the algorithm is provably stable as opposed to other classical HOPS approaches. With numerical experiments we show the remarkable efficiency, fidelity, and accuracy one can achieve with an implementation of this algorithm.

Qualitative Characteristics of Memories for Real, Imagined, and Media-Based Events

Science.gov (United States)

Gordon, Ruthanna; Gerrig, Richard J.; Franklin, Nancy

2009-01-01

People's memories must be able to represent experiences with multiple types of origins--including the real world and our own imaginations, but also printed texts (prose-based media), movies, and television (screen-based media). This study was intended to identify cues that distinguish prose- and screen-based media memories from each other, as well…

A Numerical Model for Trickle Bed Reactors

Science.gov (United States)

Propp, Richard M.; Colella, Phillip; Crutchfield, William Y.; Day, Marcus S.

2000-12-01

Trickle bed reactors are governed by equations of flow in porous media such as Darcy's law and the conservation of mass. Our numerical method for solving these equations is based on a total-velocity splitting, sequential formulation which leads to an implicit pressure equation and a semi-implicit mass conservation equation. We use high-resolution finite-difference methods to discretize these equations. Our solution scheme extends previous work in modeling porous media flows in two ways. First, we incorporate physical effects due to capillary pressure, a nonlinear inlet boundary condition, spatial porosity variations, and inertial effects on phase mobilities. In particular, capillary forces introduce a parabolic component into the recast evolution equation, and the inertial effects give rise to hyperbolic nonconvexity. Second, we introduce a modification of the slope-limiting algorithm to prevent our numerical method from producing spurious shocks. We present a numerical algorithm for accommodating these difficulties, show the algorithm is second-order accurate, and demonstrate its performance on a number of simplified problems relevant to trickle bed reactor modeling.

Numerical Simulation of Damage during Forging with Superimposed Hydrostatic Pressure by Active Media

International Nuclear Information System (INIS)

Behrens, B.-A.; Hagen, T.; Roehr, S.; Sidhu, K. B.

2007-01-01

The effective reduction of energy consumption and a reasonable treatment of resources can be achieved by minimizing a component's weight using lightweight metals. In this context, aluminum alloys play a major role. Due to their material-sided restricted formability, the mentioned aluminum materials are difficult to form. The plasticity of a material is ascertained by its maximum forming limit. It is attained, when the deformation causes mechanical damage within the material. Damage of that sort is reached more rapidly, the greater the tensile strength rate in relation to total tension rate. A promising approach of handling these low ductile, high-strength aluminum alloys within a forming process, is forming with a synchronized superposition of comprehensive stress by active media such as by controlling oil pressure. The influence of superimposed hydrostatic pressure on the flow stress was analyzed as well as the formability for different procedures at different hydrostatic pressures and temperature levels. It was observed that flow stress is independent of superimposed hydrostatic pressure. Neither the superimposed pressure has an influence on the plastic deformation, nor does a pressure dependent material hardening due to increasing hydrostatic pressure take place. The formability increases with rising hydrostatic pressure. The relative gain at room temperature and increase of the superimposed pressure from 0 to 600 bar for tested materials was at least 140 % and max. 220 %. Therefore in this paper, based on these experimental observations, it is the intended to develop a numerical simulation in order to predict ductile damage that occurs in the bulk forging process with superimposed hydrostatic pressure based Lemaitre's damage model

A solution of coupled heat-moisture transfer in saturated-unsaturated media

International Nuclear Information System (INIS)

Geraminegad, M.; Saxena, S.K.

1985-01-01

Two formulations of coupled heat and mass flow in the porous media are presented and solved numerically using finite element method. This paper concludes that the formulation based on Phillip and de Vries better estimates heat flow, and, the non-linear behavior of soil parameters significantly affects heat and mass flow in the porous media

On the interpretation of double-packer tests in heterogeneous porous media: Numerical simulations using the stochastic continuum analogue

International Nuclear Information System (INIS)

Follin, S.

1992-12-01

Flow in fractured crystalline (hard) rocks is of interest in Sweden for assessing the postclosure radiological safety of a deep repository for high-level nuclear waste. For simulation of flow and mass transport in the far field different porous media concepts are often used, whereas discrete fracture/channel network concepts are often used for near-field simulations. Due to lack of data, it is generally necessary to have resort to single-hole double-packer test data for the far-field simulations, i.e., test data on a small scale are regularized in order to fit a comparatively coarser numerical discretization, which is governed by various computational constraints. In the present study the Monte Carlo method is used to investigate the relationship between the transmissivity value interpreted and the corresponding radius of influence in conjunction with single-hole double-packer tests in heterogeneous formations. The numerical flow domain is treated as a two-dimensional heterogeneous porous medium with a spatially varying diffusivity on 3 m scale. The Monte Carlo simulations demonstrate the sensitivity to the correlation range of a spatially varying diffusivity field. In contradiction to what is tacitly assumed in stochastic subsurface hydrology, the results show that the lateral support scale (e.g., the radius of influence) of transmissivity measurements in heterogeneous porous media is a random variable, which is affected by both the hydraulic and statistical characteristics. If these results are general, the traditional methods for scaling-up, assuming a constant lateral scale of support and a multi normal distribution, may lead to an underestimation of the persistence and connectivity of transmissive zones, particularly in highly heterogeneous porous media

Numerical and experimental approaches to simulate soil clogging in porous media

Science.gov (United States)

Kanarska, Yuliya; LLNL Team

2012-11-01

Failure of a dam by erosion ranks among the most serious accidents in civil engineering. The best way to prevent internal erosion is using adequate granular filters in the transition areas where important hydraulic gradients can appear. In case of cracking and erosion, if the filter is capable of retaining the eroded particles, the crack will seal and the dam safety will be ensured. A finite element numerical solution of the Navier-Stokes equations for fluid flow together with Lagrange multiplier technique for solid particles was applied to the simulation of soil filtration. The numerical approach was validated through comparison of numerical simulations with the experimental results of base soil particle clogging in the filter layers performed at ERDC. The numerical simulation correctly predicted flow and pressure decay due to particle clogging. The base soil particle distribution was almost identical to those measured in the laboratory experiment. To get more precise understanding of the soil transport in granular filters we investigated sensitivity of particle clogging mechanisms to various aspects such as particle size ration, the amplitude of hydraulic gradient, particle concentration and contact properties. By averaging the results derived from the grain-scale simulations, we investigated how those factors affect the semi-empirical multiphase model parameters in the large-scale simulation tool. The Department of Homeland Security Science and Technology Directorate provided funding for this research.

Criteria for social media-based scholarship in health professions education.

Science.gov (United States)

Sherbino, Jonathan; Arora, Vineet M; Van Melle, Elaine; Rogers, Robert; Frank, Jason R; Holmboe, Eric S

2015-10-01

Social media are increasingly used in health professions education. How can innovations and research that incorporate social media applications be adjudicated as scholarship? To define the criteria for social media-based scholarship in health professions education. In 2014 the International Conference on Residency Education hosted a consensus conference of health professions educators with expertise in social media. An expert working group drafted consensus statements based on a literature review. Draft consensus statements were posted on an open interactive online platform 2 weeks prior to the conference. In-person and virtual (via Twitter) participants modified, added or deleted draft consensus statements in an iterative fashion during a facilitated 2 h session. Final consensus statements were unanimously endorsed. A review of the literature demonstrated no existing criteria for social media-based scholarship. The consensus of 52 health professions educators from 20 organisations in four countries defined four key features of social media-based scholarship. It must (1) be original; (2) advance the field of health professions education by building on theory, research or best practice; (3) be archived and disseminated; and (4) provide the health professions education community with the ability to comment on and provide feedback in a transparent fashion that informs wider discussion. Not all social media activities meet the standard of education scholarship. This paper clarifies the criteria, championing social media-based scholarship as a legitimate academic activity in health professions education. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Pore-scale study on flow and heat transfer in 3D reconstructed porous media using micro-tomography images

International Nuclear Information System (INIS)

Liu, Zhenyu; Wu, Huiying

2016-01-01

Highlights: • The complex porous domain has been reconstructed with the micro CT scan images. • Pore-scale numerical model based on LB method has been established. • The correlations for flow and heat transfer were derived from the predictions. • The numerical approach developed in this work is suitable for complex porous media. - Abstract: This paper presents the numerical study on fluid flow and heat transfer in reconstructed porous media at the pore-scale with the double-population thermal lattice Boltzmann (LB) method. The porous geometry was reconstructed using micro-tomography images from micro-CT scanner. The thermal LB model was numerically tested before simulation and a good agreement was achieved by compared with the existing results. The detailed distributions of velocity and temperature in complex pore spaces were obtained from the pore-scale simulation. The correlations for flow and heat transfer in the specific porous media sample were derived based on the numerical results. The numerical method established in this work provides a promising approach to predict pore-scale flow and heat transfer characteristics in reconstructed porous domain with real geometrical effect, which can be extended for the continuum modeling of the transport process in porous media at macro-scale.

A generalized multiscale finite element method for elastic wave propagation in fractured media

KAUST Repository

Chung, Eric T.

2016-02-26

In this paper, we consider elastic wave propagation in fractured media applying a linear-slip model to represent the effects of fractures on the wavefield. Fractured media, typically, are highly heterogeneous due to multiple length scales. Direct numerical simulations for wave propagation in highly heterogeneous fractured media can be computationally expensive and require some type of model reduction. We develop a multiscale model reduction technique that captures the complex nature of the media (heterogeneities and fractures) in the coarse scale system. The proposed method is based on the generalized multiscale finite element method, where the multiscale basis functions are constructed to capture the fine-scale information of the heterogeneous, fractured media and effectively reduce the degrees of freedom. These multiscale basis functions are coupled via the interior penalty discontinuous Galerkin method, which provides a block-diagonal mass matrix. The latter is needed for fast computation in an explicit time discretization, which is used in our simulations. Numerical results are presented to show the performance of the presented multiscale method for fractured media. We consider several cases where fractured media contain fractures of multiple lengths. Our numerical results show that the proposed reduced-order models can provide accurate approximations for the fine-scale solution.

A generalized multiscale finite element method for elastic wave propagation in fractured media

KAUST Repository

Chung, Eric T.; Efendiev, Yalchin R.; Gibson, Richard L.; Vasilyeva, Maria

2016-01-01

In this paper, we consider elastic wave propagation in fractured media applying a linear-slip model to represent the effects of fractures on the wavefield. Fractured media, typically, are highly heterogeneous due to multiple length scales. Direct numerical simulations for wave propagation in highly heterogeneous fractured media can be computationally expensive and require some type of model reduction. We develop a multiscale model reduction technique that captures the complex nature of the media (heterogeneities and fractures) in the coarse scale system. The proposed method is based on the generalized multiscale finite element method, where the multiscale basis functions are constructed to capture the fine-scale information of the heterogeneous, fractured media and effectively reduce the degrees of freedom. These multiscale basis functions are coupled via the interior penalty discontinuous Galerkin method, which provides a block-diagonal mass matrix. The latter is needed for fast computation in an explicit time discretization, which is used in our simulations. Numerical results are presented to show the performance of the presented multiscale method for fractured media. We consider several cases where fractured media contain fractures of multiple lengths. Our numerical results show that the proposed reduced-order models can provide accurate approximations for the fine-scale solution.

Web-Based Media Contents Editor for UCC Websites

Science.gov (United States)

Kim, Seoksoo

The purpose of this research is to "design web-based media contents editor for establishing UCC(User Created Contents)-based websites." The web-based editor features user-oriented interfaces and increased convenience, significantly different from previous off-line editors. It allows users to edit media contents online and can be effectively used for online promotion activities of enterprises and organizations. In addition to development of the editor, the research aims to support the entry of enterprises and public agencies to the online market by combining the technology with various UCC items.

Media advocacy: lessons from community experiences.

Science.gov (United States)

Jernigan, D H; Wright, P A

1996-01-01

Media advocacy is the strategic use of mass media and community organizing as a resource for advancing a social or public policy initiative. Across the United States, communities are using media advocacy to promote healthier public policies and environments. The U.S. Center for Substance Abuse Prevention commissioned numerous case studies of media advocacy on alcohol and tobacco issues in a diverse array of communities, including efforts in African-American and Latino communities or using computer-based electronic communication systems. The paper describes these efforts briefly, and summarizes lessons learned, including: media advocacy can lead to larger victories when used as a complement to community organizing in the context of a larger strategic vision for policy change; like policy advocacy, media advocacy is best done in the context of clear long-term goals; conscious framing, guiding the choice of spokespeople, visuals, and messages, can alter media coverage and public debate of health policies; advocates need to respect the media but also remember that they have power in relation to the media; and media advocacy is often controversial and not suited to every situation. The case studies show that media advocacy is a potent tool for public health workers, making an important contribution to campaigns to promote healthier public policies.

Laboratory and numerical investigations of kinetic interface sensitive tracers transport for immiscible two-phase flow porous media systems

Science.gov (United States)

Tatomir, Alexandru Bogdan A. C.; Sauter, Martin

2017-04-01

A number of theoretical approaches estimating the interfacial area between two fluid phases are available (Schaffer et al.,2013). Kinetic interface sensitive (KIS) tracers are used to describe the evolution of fluid-fluid interfaces advancing in two phase porous media systems (Tatomir et al., 2015). Initially developed to offer answers about the supercritical (sc)CO2 plume movement and the efficiency of trapping in geological carbon storage reservoirs, KIS tracers are tested in dynamic controlled laboratory conditions. N-octane and water, analogue to a scCO2 - brine system, are used. The KIS tracer is dissolved in n-octane, which is injected as the non-wetting phase in a fully water saturated porous media column. The porous system is made up of spherical glass beads with sizes of 100-250 μm. Subsequently, the KIS tracer follows a hydrolysis reaction over the n-octane - water interface resulting in an acid and phenol which are both water soluble. The fluid-fluid interfacial area is described numerically with the help of constitutive-relationships derived from the Brooks-Corey model. The specific interfacial area is determined numerically from pore scale calculations, or from different literature sources making use of pore network model calculations (Joekar-Niasar et al., 2008). This research describes the design of the laboratory setup and compares the break-through curves obtained with the forward model and in the laboratory experiment. Furthermore, first results are shown in the attempt to validate the immiscible two phase flow reactive transport numerical model with dynamic laboratory column experiments. Keywords: Fluid-fluid interfacial area, KIS tracers, model validation, CCS, geological storage of CO2

Numerical study of compositional compressible degenerate two-phase flow in saturated–unsaturated heterogeneous porous media

KAUST Repository

Saad, Ali S.; Saad, Bilal Mohammed; Saad, Mazen

2016-01-01

We study the convergence of a combined finite volume-nonconforming finite element scheme on general meshes for a partially miscible two-phase flow model in anisotropic porous media. This model includes capillary effects and exchange between the phases. The diffusion term, which can be anisotropic and heterogeneous, is discretized by piecewise linear nonconforming triangular finite elements. The other terms are discretized by means of a cell-centered finite volume scheme on a dual mesh. The relative permeability of each phase is decentered according to the sign of the velocity at the dual interface. The convergence of the scheme is proved thanks to an estimate on the two pressures which allows to show estimates on the discrete time and compactness results in the case of degenerate relative permeabilities. A key point in the scheme is to use particular averaging formula for the dissolution function arising in the diffusion term. We show also a simulation of hydrogen production in nuclear waste management. Numerical results are obtained by in-house numerical code. © 2015 Elsevier Ltd.

Numerical study of compositional compressible degenerate two-phase flow in saturated–unsaturated heterogeneous porous media

KAUST Repository

Saad, Ali S.

2016-01-02

We study the convergence of a combined finite volume-nonconforming finite element scheme on general meshes for a partially miscible two-phase flow model in anisotropic porous media. This model includes capillary effects and exchange between the phases. The diffusion term, which can be anisotropic and heterogeneous, is discretized by piecewise linear nonconforming triangular finite elements. The other terms are discretized by means of a cell-centered finite volume scheme on a dual mesh. The relative permeability of each phase is decentered according to the sign of the velocity at the dual interface. The convergence of the scheme is proved thanks to an estimate on the two pressures which allows to show estimates on the discrete time and compactness results in the case of degenerate relative permeabilities. A key point in the scheme is to use particular averaging formula for the dissolution function arising in the diffusion term. We show also a simulation of hydrogen production in nuclear waste management. Numerical results are obtained by in-house numerical code. © 2015 Elsevier Ltd.

Numerical modeling of contaminant transport in fractured porous media using mixed finite-element and finitevolume methods

KAUST Repository

Dong, Chen

2011-01-01

A mathematical model for contaminant species passing through fractured porous media is presented. In the numerical model, we combine two locally conservative methods; i.e., the mixed finite-element (MFE) method and the finite-volume method. Adaptive triangle mesh is used for effective treatment of the fractures. A hybrid MFE method is employed to provide an accurate approximation of velocity fields for both the fractures and matrix, which are crucial to the convection part of the transport equation. The finite-volume method and the standard MFE method are used to approximate the convection and dispersion terms, respectively. The temporary evolution for the pressure distributions, streamline fields, and concentration profiles are obtained for six different arrangements of fractures. The results clearly show the distorted concentration effects caused by the ordered and disordered (random) patterns of the fractures and illustrate the robustness and efficiency of the proposed numerical model. © 2011 by Begell House Inc.

A numerical study of super-resolution through fast 3D wideband algorithm for scattering in highly-heterogeneous media

KAUST Repository

Létourneau, Pierre-David

2016-09-19

We present a wideband fast algorithm capable of accurately computing the full numerical solution of the problem of acoustic scattering of waves by multiple finite-sized bodies such as spherical scatterers in three dimensions. By full solution, we mean that no assumption (e.g. Rayleigh scattering, geometrical optics, weak scattering, Born single scattering, etc.) is necessary regarding the properties of the scatterers, their distribution or the background medium. The algorithm is also fast in the sense that it scales linearly with the number of unknowns. We use this algorithm to study the phenomenon of super-resolution in time-reversal refocusing in highly-scattering media recently observed experimentally (Lemoult et al., 2011), and provide numerical arguments towards the fact that such a phenomenon can be explained through a homogenization theory.

Iodine-based contrast media, multiple myeloma and monoclonal gammopathies

DEFF Research Database (Denmark)

Stacul, Fulvio; Bertolotto, Michele; Thomsen, Henrik S

2018-01-01

OBJECTIVES: Many radiologists and clinicians still consider multiple myeloma (MM) and monoclonal gammopathies (MG) a contraindication for using iodine-based contrast media. The ESUR Contrast Media Safety Committee performed a systematic review of the incidence of post-contrast acute kidney injury...

A Numerical Study of Quantization-Based Integrators

Directory of Open Access Journals (Sweden)

Barros Fernando

2014-01-01

Full Text Available Adaptive step size solvers are nowadays considered fundamental to achieve efficient ODE integration. While, traditionally, ODE solvers have been designed based on discrete time machines, new approaches based on discrete event systems have been proposed. Quantization provides an efficient integration technique based on signal threshold crossing, leading to independent and modular solvers communicating through discrete events. These solvers can benefit from the large body of knowledge on discrete event simulation techniques, like parallelization, to obtain efficient numerical integration. In this paper we introduce new solvers based on quantization and adaptive sampling techniques. Preliminary numerical results comparing these solvers are presented.

A numerical model for density-and-viscosity-dependent flows in two-dimensional variably saturated porous media

Science.gov (United States)

Boufadel, Michel C.; Suidan, Makram T.; Venosa, Albert D.

1999-04-01

We present a formulation for water flow and solute transport in two-dimensional variably saturated media that accounts for the effects of the solute on water density and viscosity. The governing equations are cast in a dimensionless form that depends on six dimensionless groups of parameters. These equations are discretized in space using the Galerkin finite element formulation and integrated in time using the backward Euler scheme with mass lumping. The modified Picard method is used to linearize the water flow equation. The resulting numerical model, the MARUN model, is verified by comparison to published numerical results. It is then used to investigate beach hydraulics at seawater concentration (about 30 g l -1) in the context of nutrients delivery for bioremediation of oil spills on beaches. Numerical simulations that we conducted in a rectangular section of a hypothetical beach revealed that buoyancy in the unsaturated zone is significant in soils that are fine textured, with low anisotropy ratio, and/or exhibiting low physical dispersion. In such situations, application of dissolved nutrients to a contaminated beach in a freshwater solution is superior to their application in a seawater solution. Concentration-engendered viscosity effects were negligible with respect to concentration-engendered density effects for the cases that we considered.

Developing an Android Based Application as Balinese Shadow Puppet Educational Media

Directory of Open Access Journals (Sweden)

Gede Doni Agustina

2017-04-01

Full Text Available Instead of being a barrier in preserving the culture, the development of technology is supposed to be an effective strategy of cultural preservation and protection. Modern and update technology provides an effective media of culture campaign. This study presented the development process of an android based Balinese shadow puppet educational media as both an effective learning media and a strategy to preserve Balinese shadow puppet. This study was categorized as research and development. The media was developed by using waterfall model and implemented by using the Lua Programming language with editor and Corona SDK simulator.  The collected data were the users’ response to the developed media resulted from questionnaires. The user’s response to the media was categorized as positive. Based on the results of this study, the media were equipped with well operated features and functions and user friendly interface.

Digital media in Serbia: Uses and risks

Directory of Open Access Journals (Sweden)

Radojković Miroljub

2017-01-01

Full Text Available This article presents the overview of the distribution and consequences of the use of digital media in Serbia based on the systematization of the answers to four research questions. By the opinion of the author, when we say digital media, we should consider at least five types of institutions. These are: all mass media that have done convergence with digital, information-communication technology; electronic media that have switched to program diffusion through 'Internet protocol'; web sites and portals which fulfill the legal norms to become mass media; public announcements via blogs and posts by the individuals on social networks; and cultural institutions which improve interactions with their audience through Internet. The article lists the numerous advantages of digital media that are inevitably multiplied. On the other hand, the risks and menaces caused by this trend are also listed. In conclusion, it is ascertained that media and cultural institutions cannot just archive huge production of information and cultural and/or quasi cultural, artistic products, and that the burden of selection and responsibility falls on the shoulder of the users.

Theoretical and numerical study of thermo-hydro-mechanical damage in unsaturated porous media

International Nuclear Information System (INIS)

Arson, Ch.

2009-09-01

Nuclear waste disposals are designed in multi-phase porous media. A new damage model, formulated in independent state variables (net stress, suction and thermal stress), is proposed for such geo-materials. The damage variable is a second-order tensor, which principal values grow with tensile strains. The stress/strain relations are derived from a postulated expression of the free energy. The degraded rigidities are computed by applying the Principle of Equivalent Elastic Energy for each stress state variable. Cracking effects are taken into account in transfers by introducing internal length parameters in the expressions of moisture conductivities. The damage model has been implemented in Θ-Stock Finite Element code. The mechanical model has been validated by comparing numerical results to experimental data and theoretical predictions. The qualitative evolutions given by the model in the parametric studies performed on realistic complex configurations show good trends. (author)

Reduced-Order Direct Numerical Simulation of Solute Transport in Porous Media

Science.gov (United States)

Mehmani, Yashar; Tchelepi, Hamdi

2017-11-01

Pore-scale models are an important tool for analyzing fluid dynamics in porous materials (e.g., rocks, soils, fuel cells). Current direct numerical simulation (DNS) techniques, while very accurate, are computationally prohibitive for sample sizes that are statistically representative of the porous structure. Reduced-order approaches such as pore-network models (PNM) aim to approximate the pore-space geometry and physics to remedy this problem. Predictions from current techniques, however, have not always been successful. This work focuses on single-phase transport of a passive solute under advection-dominated regimes and delineates the minimum set of approximations that consistently produce accurate PNM predictions. Novel network extraction (discretization) and particle simulation techniques are developed and compared to high-fidelity DNS simulations for a wide range of micromodel heterogeneities and a single sphere pack. Moreover, common modeling assumptions in the literature are analyzed and shown that they can lead to first-order errors under advection-dominated regimes. This work has implications for optimizing material design and operations in manufactured (electrodes) and natural (rocks) porous media pertaining to energy systems. This work was supported by the Stanford University Petroleum Research Institute for Reservoir Simulation (SUPRI-B).

Pore size distribution effect on rarefied gas transport in porous media

Science.gov (United States)

Hori, Takuma; Yoshimoto, Yuta; Takagi, Shu; Kinefuchi, Ikuya

2017-11-01

Gas transport phenomena in porous media are known to strongly influence the performance of devices such as gas separation membranes and fuel cells. Knudsen diffusion is a dominant flow regime in these devices since they have nanoscale pores. Many experiments have shown that these porous media have complex structures and pore size distributions; thus, the diffusion coefficient in these media cannot be easily assessed. Previous studies have reported that the characteristic pore diameter of porous media can be defined in light of the pore size distribution; however, tortuosity factor, which is necessary for the evaluation of diffusion coefficient, is still unknown without gas transport measurements or simulations. Thus, the relation between pore size distributions and tortuosity factors is required to obtain the gas transport properties. We perform numerical simulations to prove the relation between them. Porous media are numerically constructed while satisfying given pore size distributions. Then, the mean-square displacement simulation is performed to obtain the tortuosity factors of the constructed porous media.. This paper is based on results obtained from a project commissioned by the New Energy and Industrial Development Organization (NEDO).

Developing android-based science instructional media to improve scientific literacy of junior high school students

Science.gov (United States)

Farida, I. I.; Jumadi; Wilujeng; Senam

2018-04-01

The aims of this study are: to develop android-based science instructional media and to reveal the characteristic, the quality, and the effectiveness of android-based science instructional media with global warming topic to increase junior high school students’ scientific literacy. This study is a development research. The instructional media were reviewed by a media expert, a material expert, science teachers, peer reviewers, and students. The data was collected using media evaluation questionnaires. The results of the study showed that: (1) the android-based science instructional media has characteristics including interesting visualization, easy to use, flexible, and practical, (2) the android-based science instructional media was appropriate for teaching, in terms of material evaluation aspects, media evaluation aspects, and based on student test results, and (3) the android-based science instructional media can effectively used for teaching.

Direct imaging of turbid media using long-time back-scattered photons, a numerical study

International Nuclear Information System (INIS)

Boulanger, Joan; Liu, Fengshan; El Akel, Azad; Charette, Andre

2006-01-01

Direct imaging is a convenient way to obtain information on the interior of a semi-transparent turbid material by non-invasive probing using laser beams. The major difficulty is linked to scattering which scrambles the directional information coming from the laser beam. It is found in this paper that the long-term multiple-scattered reflected photons may provide structural information on the inside of a material, which offers an interesting alternative to using information only from un-scattered or least-scattered photons as obtained from current direct imaging set-ups for thin media. Based on some observations on a non-homogeneous three layered 1-D slab irradiated by a laser pulse, a direct probing methodology making use of the long-term back-scattered photons is illustrated to recover inclusions positions in a turbid 2-D medium. First, the numerical model is presented. Second, an extended parametrical study is conducted on 1-D homogeneous and non-homogeneous slabs with different laser pulse durations. It is found that the reflected asymptotic logarithmic slope carries information about the presence of the inclusion and that short laser pulses are not necessary since only the decaying parts of the remanent optical signature is important. Longer laser pulses allow a higher level of energy injection and signal to noise ratio. Third, those observations are used for the probing of a 2-D non-homogeneous phantom. (author)

The necessity of a media literacy module within journalism or media studies curricula

OpenAIRE

Fidelia Van der Linde

2011-01-01

Media today is more omnipresent covering all aspects of society, ranging from historical to topical to social and political, thereby forming an integral part of people’s lives. In the South African context, the introduction of democracy, coupled with numerous global technological developments, has dramatically altered the media landscape rendering it more liberal with an increased exponential content. In most democratic countries media literacy education is considered the preferred alternativ...

Credit risk evaluation based on social media.

Science.gov (United States)

Yang, Yang; Gu, Jing; Zhou, Zongfang

2016-07-01

Social media has been playing an increasingly important role in the sharing of individuals' opinions on many financial issues, including credit risk in investment decisions. This paper analyzes whether these opinions, which are transmitted through social media, can accurately predict enterprises' future credit risk. We consider financial statements oriented evaluation results based on logit and probit approaches as the benchmarks. We then conduct textual analysis to retrieve both posts and their corresponding commentaries published on two of the most popular social media platforms for financial investors in China. Professional advice from financial analysts is also investigated in this paper. We surprisingly find that the opinions extracted from both posts and commentaries surpass opinions of analysts in terms of credit risk prediction. Copyright © 2015 Elsevier Inc. All rights reserved.

Comparison of numerical dispersion for finite-difference algorithms in transversely isotropic media with a vertical symmetry axis

International Nuclear Information System (INIS)

Liang, Wen-Quan; Wang, Yan-Fei; Yang, Chang-Chun

2015-01-01

Numerical simulation of the wave equation is widely used to synthesize seismograms theoretically and is also the basis of the reverse time migration and full waveform inversion. For the finite difference methods, grid dispersion often exists because of the discretization of the time and the spatial derivatives in the wave equation. How to suppress the grid dispersion is therefore a key problem for finite difference (FD) approaches. The FD operators for the space derivatives are usually obtained in the space domain. However, the wave equations are discretized in the time and space directions simultaneously. So it would be better to design the FD operators in the time–space domain. We improved the time–space domain method for obtaining the FD operators in an acoustic vertically transversely isotropic (VTI) media so as to cover a much wider range of frequencies. Dispersion analysis and seismic numerical simulation demonstrate the effectiveness of the proposed method. (paper)

Transport phenomena in porous media

CERN Document Server

Ingham, Derek B

1998-01-01

Research into thermal convection in porous media has substantially increased during recent years due to its numerous practical applications. These problems have attracted the attention of industrialists, engineers and scientists from many very diversified disciplines, such as applied mathematics, chemical, civil, environmental, mechanical and nuclear engineering, geothermal physics and food science. Thus, there is a wealth of information now available on convective processes in porous media and it is therefore appropriate and timely to undertake a new critical evaluation of this contemporary information. Transport Phenomena in Porous Media contains 17 chapters and represents the collective work of 27 of the world's leading experts, from 12 countries, in heat transfer in porous media. The recent intensive research in this area has substantially raised the expectations for numerous new practical applications and this makes the book a most timely addition to the existing literature. It includes recent major deve...

The Golden Ratio in Time-based Media

Directory of Open Access Journals (Sweden)

Emily Verba

2013-06-01

Full Text Available Measure and proportion manifest themselves in all areas of beauty and virtue.–Socrates Mathematics and visual communication share a long historical, symbiotic relationship. In their pursuit of achieving order and beauty, they find common ground through geometry. The golden ratio is a mathematic and aesthetic phenomenon inherent in nature that has consistently evoked sensory enjoyment since antiquity. It may be assumed that the manifestation of the golden ratio in nature accounts for human’s innate enjoyment of it. Throughout the ages, the conscious application of the golden ratio to proportions found in art, architecture, poetry, literature and musical composition has consistently evoked subconscious sensory pleasure. However, the application of the golden ratio to visual temporal proportion, or time-based media, has seldom been investigated. This thesis investigates various applications of the golden ratio as a mathematical framework for choreographing visually harmonious temporal compositions through time-based media. The proliferation of moving images we face on a daily basis is cause for great concern, as we have increasingly less free time in our days. Informative and pleasing images are buried in an avalanche of visual rubbish, constantly streaming into our physical and virtual worlds. Time-based media has the ability to expand and contract movement, thus directing the way viewers experience and spend their time. This investigation presupposes that editing moving images via increments of time determined by the golden ratio may streamline messages, isolating what is most symbolic and effectively communicative within a mathematical framework. A physiological and psychological benefit is created for viewers; there is no wasted time or space. Image-makers and visual communicators have a responsibility to create only that which is useful and/or aesthetically pleasing. An investigation into the temporal structure of time-based media, using

Fuel micro-mechanics: homogenization, cracking, granular media

International Nuclear Information System (INIS)

Monerie, Yann

2010-01-01

cracked media. Cracking: The main aim of this topic is the numerical simulation of multiple cracking of strongly heterogeneous media from their sound state to their fractured state. A method called 'Non Smooth Fracture Dynamics' is proposed. It is based on a cohesive-volume finite element model and on a non-regular dynamic multi-body management (implicit scheme). The main theoretical and practical difficulties of the cohesive-volume method are discussed in detail: non-uniqueness of solutions, instabilities, dependence on the mesh system, local diversity, and experimental identification of the cohesive properties. By combining this method with analytical and numerical homogenization techniques, a two-scale volume and surface approach is developed for the cracking of media with a property gradient: the effect of the spatial distribution of weakening inclusions on the macroscopic fracture criteria and on the tortuosity of crack paths is revealed. An intermediate result of this work is the statistical characterization of the representative elementary volumes in cracking and fracture. Granular media: This more recent topic includes the numerical and stochastic analysis of discrete media in the presence or absence of a fluid phase. For the numerical analysis, the non-regular dynamic multi-body method is used. In the case of an interstitial or surrounding fluid, this method is coupled with two other classes of method according to the inertial regime and the size of the system considered: porous medium methods (homogeneous fluid equivalent) or fictitious domain type (direct numerical simulation). These methods are confirmed on fluidization and sedimentation tests. For the analysis, some results are obtained for gravity flows: blocking statistic in silo configuration, compaction effects during undersea avalanches. (author)

Web-Based Media Literacy to Prevent Tobacco Use among High School Students

Science.gov (United States)

Phelps-Tschang, Jane S.; Miller, Elizabeth; Rice, Kristen; Primack, Brian A.

2015-01-01

Facilitator-led smoking media literacy (SML) programs have improved media literacy and reduced intention to smoke. However, these programs face limitations including high costs and barriers to standardization. We examined the efficacy of a Web-based media literacy program in improving smoking media literacy skills among adolescents. Sixty-six 9th…

Digital Media Stories for Persuasion

Science.gov (United States)

Leopold, Lisa

2010-01-01

Digital media story-telling (which enhances traditional oral story-telling with images, music, and text) has been a focus of recent scholarship for its potential to produce numerous educational benefits. Through digital media storytelling, students' imagination, creativity, critical thinking, writing, public speaking, and organizational or…

Streaming Media for Web Based Training.

Science.gov (United States)

Childers, Chad; Rizzo, Frank; Bangert, Linda

This paper discusses streaming media for World Wide Web-based training (WBT). The first section addresses WBT in the 21st century, including the Synchronized Multimedia Integration Language (SMIL) standard that allows multimedia content such as text, pictures, sound, and video to be synchronized for a coherent learning experience. The second…

A Social Media-Based Mindful Yoga Program for Pregnant Women in Taiwan.

Science.gov (United States)

Guo, Sophie Huey-Ming; Lee, Chia-Wen; Tsao, Chien-Ming; Hsing, Hung-Chun

2016-01-01

Social media, a communication tool, is increasingly used to facilitate the engagement of experts (such as a health provider) and other participants in a wide range of programs. However, social media requires study to elucidate its applications under women health-related conditions. This work develops a social media-based mindful yoga program for pregnant women, and delivers media content by ways of Facebook platform and DVD. The results of pilot testing revealed users' preference of using Facebook platform. Developing experience and uses' responses can provide valuable information for further implement socialmedia based interventions.

An open-source toolbox for multiphase flow in porous media

Science.gov (United States)

Horgue, P.; Soulaine, C.; Franc, J.; Guibert, R.; Debenest, G.

2015-02-01

Multiphase flow in porous media provides a wide range of applications: from the environmental understanding (aquifer, site-pollution) to industrial process improvements (oil production, waste management). Modeling of such flows involves specific volume-averaged equations and therefore specific computational fluid dynamics (CFD) tools. In this work, we develop a toolbox for modeling multiphase flow in porous media with OpenFOAM®, an open-source platform for CFD. The underlying idea of this approach is to provide an easily adaptable tool that can be used in further studies to test new mathematical models or numerical methods. The package provides the most common effective properties models of the literature (relative permeability, capillary pressure) and specific boundary conditions related to porous media flows. To validate this package, solvers based on the IMplicit Pressure Explicit Saturation (IMPES) method are developed in the toolbox. The numerical validation is performed by comparison with analytical solutions on academic cases. Then, a satisfactory parallel efficiency of the solver is shown on a more complex configuration.

Teaching numerical methods with IPython notebooks and inquiry-based learning

KAUST Repository

Ketcheson, David I.

2014-01-01

A course in numerical methods should teach both the mathematical theory of numerical analysis and the craft of implementing numerical algorithms. The IPython notebook provides a single medium in which mathematics, explanations, executable code, and visualizations can be combined, and with which the student can interact in order to learn both the theory and the craft of numerical methods. The use of notebooks also lends itself naturally to inquiry-based learning methods. I discuss the motivation and practice of teaching a course based on the use of IPython notebooks and inquiry-based learning, including some specific practical aspects. The discussion is based on my experience teaching a Masters-level course in numerical analysis at King Abdullah University of Science and Technology (KAUST), but is intended to be useful for those who teach at other levels or in industry.

Comparative analysis of e-commerce and social media based trading in Indonesia

Science.gov (United States)

Sfenrianto; Wang, Gunawan; Abdul, Halim; Nurul, Fajar Ahmad

2017-09-01

The growth of social media and e-commerce recently has caused the unique phenomenon in Indonesia. That phenomenon is online trading using social media like Facebook, Blackberry messenger, Whatsapp, etc. This phenomenon attracts the researcher to know how to use social media to trade, not using e-commerce marketplace like Lazada, Tokopedia, Bukalapak. The aim of the research is to know the profiling of product and buyer in e-commerce and social media and to do the comparison of that 2 channels based on eight purchase decision factors. Research conducted by taking surveys involving 306 respondents. For product and buyer profiling, this study identifies profile base on sex, education, area, jobs and online trading channel. For e-commerce & social media comparison, this study use 8 factors made based on previous related studies. Finding related purchase decision comparisons are: online trust and usability are the factors influencing people to buy the product via e-commerce. While, marketing mix, and interactivity are the factors why people buy the product via social media.

Numerically calibrated model for propagation of a relativistic unmagnetized jet in dense media

Science.gov (United States)

Harrison, Richard; Gottlieb, Ore; Nakar, Ehud

2018-03-01

Relativistic jets reside in high-energy astrophysical systems of all scales. Their interaction with the surrounding media is critical as it determines the jet evolution, observable signature, and feedback on the environment. During its motion the interaction of the jet with the ambient media inflates a highly pressurized cocoon, which under certain conditions collimates the jet and strongly affects its propagation. Recently, Bromberg et al. (2011b) derived a general simplified (semi)analytic solution for the evolution of the jet and the cocoon in case of an unmagnetized jet that propagates in a medium with a range of density profiles. In this work we use a large suite of 2D and 3D relativistic hydrodynamic simulations in order to test the validity and accuracy of this model. We discuss the similarities and differences between the analytic model and numerical simulations and also, to some extent, between 2D and 3D simulations. Our main finding is that although the analytic model is highly simplified, it properly predicts the evolution of the main ingredients of the jet-cocoon system, including its temporal evolution and the transition between various regimes (e.g., collimated to uncollimated). The analytic solution predicts a jet head velocity that is faster by a factor of about 3 compared to the simulations, as long as the head velocity is Newtonian. We use the results of the simulations to calibrate the analytic model which significantly increases its accuracy. We provide an applet that calculates semi-analytically the propagation of a jet in an arbitrary density profile defined by the user at http://www.astro.tau.ac.il/ ore/propagation.html.

Numerically calibrated model for propagation of a relativistic unmagnetized jet in dense media

Science.gov (United States)

Harrison, Richard; Gottlieb, Ore; Nakar, Ehud

2018-06-01

Relativistic jets reside in high-energy astrophysical systems of all scales. Their interaction with the surrounding media is critical as it determines the jet evolution, observable signature, and feedback on the environment. During its motion, the interaction of the jet with the ambient media inflates a highly pressurized cocoon, which under certain conditions collimates the jet and strongly affects its propagation. Recently, Bromberg et al. derived a general simplified (semi-)analytic solution for the evolution of the jet and the cocoon in case of an unmagnetized jet that propagates in a medium with a range of density profiles. In this work we use a large suite of 2D and 3D relativistic hydrodynamic simulations in order to test the validity and accuracy of this model. We discuss the similarities and differences between the analytic model and numerical simulations and also, to some extent, between 2D and 3D simulations. Our main finding is that although the analytic model is highly simplified, it properly predicts the evolution of the main ingredients of the jet-cocoon system, including its temporal evolution and the transition between various regimes (e.g. collimated to uncollimated). The analytic solution predicts a jet head velocity that is faster by a factor of about 3 compared to the simulations, as long as the head velocity is Newtonian. We use the results of the simulations to calibrate the analytic model which significantly increases its accuracy. We provide an applet that calculates semi-analytically the propagation of a jet in an arbitrary density profile defined by the user at http://www.astro.tau.ac.il/˜ore/propagation.html.

An iterative, fast-sweeping-based eikonal solver for 3D tilted anisotropic media

KAUST Repository

Waheed, Umair bin; Yarman, Can Evren; Flagg, Garret

2015-01-01

Computation of first-arrival traveltimes for quasi-P waves in the presence of anisotropy is important for high-end near-surface modeling, microseismic-source localization, and fractured-reservoir characterization - and it requires solving an anisotropic eikonal equation. Anisotropy deviating from elliptical anisotropy introduces higher order nonlinearity into the eikonal equation, which makes solving the eikonal equation a challenge. We addressed this challenge by iteratively solving a sequence of simpler tilted elliptically anisotropic eikonal equations. At each iteration, the source function was updated to capture the effects of the higher order nonlinear terms. We used Aitken's extrapolation to speed up convergence rate of the iterative algorithm. The result is an algorithm for computing first-arrival traveltimes in tilted anisotropic media. We evaluated the applicability and usefulness of our method on tilted transversely isotropic media and tilted orthorhombic media. Our numerical tests determined that the proposed method matches the first arrivals obtained by wavefield extrapolation, even for strongly anisotropic and highly complex subsurface structures. Thus, for the cases where two-point ray tracing fails, our method can be a potential substitute for computing traveltimes. The approach presented here can be easily extended to compute first-arrival traveltimes for anisotropic media with lower symmetries, such as monoclinic or even the triclinic media.

An iterative, fast-sweeping-based eikonal solver for 3D tilted anisotropic media

KAUST Repository

Waheed, Umair bin

2015-03-30

Computation of first-arrival traveltimes for quasi-P waves in the presence of anisotropy is important for high-end near-surface modeling, microseismic-source localization, and fractured-reservoir characterization - and it requires solving an anisotropic eikonal equation. Anisotropy deviating from elliptical anisotropy introduces higher order nonlinearity into the eikonal equation, which makes solving the eikonal equation a challenge. We addressed this challenge by iteratively solving a sequence of simpler tilted elliptically anisotropic eikonal equations. At each iteration, the source function was updated to capture the effects of the higher order nonlinear terms. We used Aitken\\'s extrapolation to speed up convergence rate of the iterative algorithm. The result is an algorithm for computing first-arrival traveltimes in tilted anisotropic media. We evaluated the applicability and usefulness of our method on tilted transversely isotropic media and tilted orthorhombic media. Our numerical tests determined that the proposed method matches the first arrivals obtained by wavefield extrapolation, even for strongly anisotropic and highly complex subsurface structures. Thus, for the cases where two-point ray tracing fails, our method can be a potential substitute for computing traveltimes. The approach presented here can be easily extended to compute first-arrival traveltimes for anisotropic media with lower symmetries, such as monoclinic or even the triclinic media.

PERANCANGAN WEB BASED LEARNING SEBAGAI MEDIA PEMBELAJARAN BERBASIS ICT

Directory of Open Access Journals (Sweden)

Ricky Firmansyah

2016-09-01

Full Text Available ABSTRACT The media is very important component of communication process. The effectiveness of media is very influential on extent to which a communication role will be accepted by the audience with fast and precise, or vice versa. E-Learning is present as ICT based learning media that allows students and teachers interact in different places. Web Based Learning (WBL is used as one part of the E-Learning. This study focuses on designing web-based ICT as a learning medium that is used for students and teacher interaction media that equipped with learning material in content form that will be delivered. Students can learn about learning materials that submitted by teachers through the website anytime and anywhere as long as internet access is available, including taking a test in accordance with the time specified by the teacher. Waterfall method is used as a system development method implemented using the server-side web programming scripting like PHP MySQL. After using the system, questionnaire survey conducted on students and teachers. The results from this study is 71% of the number of students who complete the survey claimed that the system is easy and fun to use and 68% of the number of teachers who complete the survey claimed that this system is very assist with their work, especially in managing test scores. Keywords: design, e-learni

Lattice Boltzmann simulation of flow and heat transfer in random porous media constructed by simulated annealing algorithm

International Nuclear Information System (INIS)

Liu, Minghua; Shi, Yong; Yan, Jiashu; Yan, Yuying

2017-01-01

Highlights: • A numerical capability combining the lattice Boltzmann method with simulated annealing algorithm is developed. • Digitized representations of random porous media are constructed using limited but meaningful statistical descriptors. • Pore-scale flow and heat transfer information in random porous media is obtained by the lattice Boltzmann simulation. • The effective properties at the representative elementary volume scale are well specified using appropriate upscale averaging. - Abstract: In this article, the lattice Boltzmann (LB) method for transport phenomena is combined with the simulated annealing (SA) algorithm for digitized porous-medium construction to study flow and heat transfer in random porous media. Importantly, in contrast to previous studies which simplify porous media as arrays of regularly shaped objects or effective pore networks, the LB + SA method in this article can model statistically meaningful random porous structures in irregular morphology, and simulate pore-scale transport processes inside them. Pore-scale isothermal flow and heat conduction in a set of constructed random porous media characterized by statistical descriptors were then simulated through use of the LB + SA method. The corresponding averages over the computational volumes and the related effective transport properties were also computed based on these pore scale numerical results. Good agreement between the numerical results and theoretical predictions or experimental data on the representative elementary volume scale was found. The numerical simulations in this article demonstrate combination of the LB method with the SA algorithm is a viable and powerful numerical strategy for simulating transport phenomena in random porous media in complex geometries.

Numerical investigation of complex flooding schemes for surfactant polymer based enhanced oil recovery

Science.gov (United States)

Dutta, Sourav; Daripa, Prabir

2015-11-01

Surfactant-polymer flooding is a widely used method of chemical enhanced oil recovery (EOR) in which an array of complex fluids containing suitable and varying amounts of surfactant or polymer or both mixed with water is injected into the reservoir. This is an example of multiphase, multicomponent and multiphysics porous media flow which is characterized by the spontaneous formation of complex viscous fingering patterns and is modeled by a system of strongly coupled nonlinear partial differential equations with appropriate initial and boundary conditions. Here we propose and discuss a modern, hybrid method based on a combination of a discontinuous, multiscale finite element formulation and the method of characteristics to accurately solve the system. Several types of flooding schemes and rheological properties of the injected fluids are used to numerically study the effectiveness of various injection policies in minimizing the viscous fingering and maximizing oil recovery. Numerical simulations are also performed to investigate the effect of various other physical and model parameters such as heterogeneity, relative permeability and residual saturation on the quantities of interest like cumulative oil recovery, sweep efficiency, fingering intensity to name a few. Supported by the grant NPRP 08-777-1-141 from the Qatar National Research Fund (a member of The Qatar Foundation).

Community-based Ontology Development, Annotation and Discussion with MediaWiki extension Ontokiwi and Ontokiwi-based Ontobedia

Science.gov (United States)

Ong, Edison; He, Yongqun

2016-01-01

Hundreds of biological and biomedical ontologies have been developed to support data standardization, integration and analysis. Although ontologies are typically developed for community usage, community efforts in ontology development are limited. To support ontology visualization, distribution, and community-based annotation and development, we have developed Ontokiwi, an ontology extension to the MediaWiki software. Ontokiwi displays hierarchical classes and ontological axioms. Ontology classes and axioms can be edited and added using Ontokiwi form or MediaWiki source editor. Ontokiwi also inherits MediaWiki features such as Wikitext editing and version control. Based on the Ontokiwi/MediaWiki software package, we have developed Ontobedia, which targets to support community-based development and annotations of biological and biomedical ontologies. As demonstrations, we have loaded the Ontology of Adverse Events (OAE) and the Cell Line Ontology (CLO) into Ontobedia. Our studies showed that Ontobedia was able to achieve expected Ontokiwi features. PMID:27570653

Evidence-based management of otitis media: a 5S model approach.

Science.gov (United States)

Wasson, J D; Yung, M W

2015-02-01

The 5S model proposes five hierarchical levels (systems, summaries, synopses, syntheses and studies) of pre-appraised evidence to guide evidence-based practice. This review aimed to identify and summarise pre-appraised evidence at the highest available 5S level for the management of different subsets of otitis media: acute otitis media, otitis media with effusion, chronic suppurative otitis media and cholesteatoma in both adults and children. Data sources were pre-appraised evidence resources. Evidence freely available from sources at the highest available level of the 5S model were summarised for this review. System level evidence exists for acute otitis media and otitis media with effusion. Summary level evidence exists for recurrent acute otitis media and medical management of chronic suppurative otitis media. There is an absence of randomised controlled trials to prove the efficacy of surgical management of chronic suppurative otitis media and cholesteatoma. Until randomised controlled trial data are generated, consensus publications on the surgical management of chronic suppurative otitis media and cholesteatoma should be used to guide best practice.

Development of an Android-based Learning Media Application for Visually Impaired Students

Directory of Open Access Journals (Sweden)

Nurul Azmi

2017-06-01

Full Text Available This research aims to develop the English for Disability (EFORD application, on Android-based learning english media for Visually Impaired students and determine its based this on assessment of matter expert, media expert, special needs teacher and students. The research method adopted in this research is Research and Development (R&D. The development of this application through five phases: (1 Analysis of problems, through observation and interviews. (2 Collecting information as product planning / analysis of the needs of the media as required of blind children. (3 The design phase of products such as the manufacture of flow and storyboard navigation map.(4 Design validation phase form of an expert assessment of the media is developed. (5 testing products phase, such as assessment of the application by blind students. The results of this research is EFORD application which is feasible to be used as English learning media for visual impairment application based on assessment: 1Media expert it's obtained a percentage scored 95%, include for very worthy category, 2Subject matter, expert its obtained percentage scored 75% include for worthy category and 3 Special needs teacher it's obtained a percentage scored 83% include for very worthy category. Upon demonstration, students indicated the positive response of ≥ 70% in each indicator. Therefore English learning media with Android based application English for Disability (EFORD is very feasible to be used as an English learning media especially grammar and speaking English content for students of visual impairment for a number of reasons. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Extrude Hone deburring with X-base media

Energy Technology Data Exchange (ETDEWEB)

Gillespie, L.K.

1973-09-01

Small precision mechanisms must have burr-free, sharp-edged parts to operate well. Controlling the size of burrs can lower burr removal costs and improve edge repeatability. Study results indicated that with conventional tooling approaches, Extrude Hone deburring with x-base media removes more material from the hole than desired and is less repeatable than required on precision miniature parts. With this media, the process is most applicable to precision miniature parts with burrs less than 25.4 ..mu..m thick, allowable hole size changes equal to burr thickness, and allowable hole size repeatability of +-0.2 times the actual average hole size change.

Cloaks and antiobject-independent illusion optics based on illusion media

Science.gov (United States)

Li, Zhou; Zang, XiaoFei; Cai, Bin; Shi, Cheng; Zhu, YiMing

2013-11-01

Based on the transformation optics, we propose a new strategy of illusion media consisting of homogeneous and anisotropic materials. By utilizing the illusion media, invisible cloak is theoretically realized, in which objects covered with the illusion media could not be detected. The cloak here allows neither the propagation of light around the concealed region nor compensates the scattering field of object outside the media. What the cloak does is to shift the region into another place where outside the trace of light, so that objects in that region can disappear. Another application of the illusion media is to create the antiobject-independent illusion optics which means that two objects appear to be like some other objects of our choice. Finite element simulations for two-dimensional cases have been performed to prove these ideas.

Development of a numerical model for fluid-structure interaction analysis of flow through and around an aquaculture net cage

DEFF Research Database (Denmark)

Chen, Hao; Christensen, Erik Damgaard

2017-01-01

In the present work, we developed a numerical model for fluid-structure interaction analysis of flow through and around an aquaculture net cage. The numerical model is based on the coupling between the porous media model and the lumped mass structural model. A novel interface was implemented...

Computational models of the hydrodynamics of fractured-porous media

International Nuclear Information System (INIS)

Grandi, G.M.

1989-01-01

The prediction of the flow pattern in fractured-porous media has great importance in the assessment of the local thermohydrological effects of the siting of a nuclear waste repository, among many other technological applications. Computational models must be used due to the complexity of the different phenomena involved which restricts the use of analytical techniques. A new numerical method, based on the boundary-fitted finite-difference technique, is presented in this thesis. The boundaries are external (the boundary of the physical domain), and internal (which correspond to the fracture network). The inclusion of the discrete fracture representation in the volume that represents the porous medium is the difference between the usual approach and the present one. The numerical model has been used in the prediction of the flow pattern in several internationally recognized verification cases and to hypothetical problems of our interest. The results obtained proved that the numerical approach considered gives accurate and reliable predictions of the hydrodynamics of fractured-porous media, allowing its use for the above mentioned studies. (Author) [es

First-arrival traveltime computation for quasi-P waves in 2D transversely isotropic media using Fermat’s principle-based fast marching

Science.gov (United States)

Hu, Jiangtao; Cao, Junxing; Wang, Huazhong; Wang, Xingjian; Jiang, Xudong

2017-12-01

First-arrival traveltime computation for quasi-P waves in transversely isotropic (TI) media is the key component of tomography and depth migration. It is appealing to use the fast marching method in isotropic media as it efficiently computes traveltime along an expanding wavefront. It uses the finite difference method to solve the eikonal equation. However, applying the fast marching method in anisotropic media faces challenges because the anisotropy introduces additional nonlinearity in the eikonal equation and solving this nonlinear eikonal equation with the finite difference method is challenging. To address this problem, we present a Fermat’s principle-based fast marching method to compute traveltime in two-dimensional TI media. This method is applicable in both vertical and tilted TI (VTI and TTI) media. It computes traveltime along an expanding wavefront using Fermat’s principle instead of the eikonal equation. Thus, it does not suffer from the nonlinearity of the eikonal equation in TI media. To compute traveltime using Fermat’s principle, the explicit expression of group velocity in TI media is required to describe the ray propagation. The moveout approximation is adopted to obtain the explicit expression of group velocity. Numerical examples on both VTI and TTI models show that the traveltime contour obtained by the proposed method matches well with the wavefront from the wave equation. This shows that the proposed method could be used in depth migration and tomography.

Multi-scale simulation for homogenization of cement media

International Nuclear Information System (INIS)

Abballe, T.

2011-01-01

To solve diffusion problems on cement media, two scales must be taken into account: a fine scale, which describes the micrometers wide microstructures present in the media, and a work scale, which is usually a few meters long. Direct numerical simulations are almost impossible because of the huge computational resources (memory, CPU time) required to assess both scales at the same time. To overcome this problem, we present in this thesis multi-scale resolution methods using both Finite Volumes and Finite Elements, along with their efficient implementations. More precisely, we developed a multi-scale simulation tool which uses the SALOME platform to mesh domains and post-process data, and the parallel calculation code MPCube to solve problems. This SALOME/MPCube tool can solve automatically and efficiently multi-scale simulations. Parallel structure of computer clusters can be use to dispatch the more time-consuming tasks. We optimized most functions to account for cement media specificities. We presents numerical experiments on various cement media samples, e.g. mortar and cement paste. From these results, we manage to compute a numerical effective diffusivity of our cement media and to reconstruct a fine scale solution. (author) [fr

Fast optical recording media based on semiconductor nanostructures for image recording and processing

International Nuclear Information System (INIS)

Kasherininov, P. G.; Tomasov, A. A.

2008-01-01

Fast optical recording media based on semiconductor nanostructures (CdTe, GaAs) for image recording and processing with a speed to 10 6 cycle/s (which exceeds the speed of known recording media based on metal-insulator-semiconductor-(liquid crystal) (MIS-LC) structures by two to three orders of magnitude), a photosensitivity of 10 -2 V/cm 2 , and a spatial resolution of 5-10 (line pairs)/mm are developed. Operating principles of nanostructures as fast optical recording media and methods for reading images recorded in such media are described. Fast optical processors for recording images in incoherent light based on CdTe crystal nanostructures are implemented. The possibility of their application to fabricate image correlators is shown.

Design and implementation of streaming media server cluster based on FFMpeg.

Science.gov (United States)

Zhao, Hong; Zhou, Chun-long; Jin, Bao-zhao

2015-01-01

Poor performance and network congestion are commonly observed in the streaming media single server system. This paper proposes a scheme to construct a streaming media server cluster system based on FFMpeg. In this scheme, different users are distributed to different servers according to their locations and the balance among servers is maintained by the dynamic load-balancing algorithm based on active feedback. Furthermore, a service redirection algorithm is proposed to improve the transmission efficiency of streaming media data. The experiment results show that the server cluster system has significantly alleviated the network congestion and improved the performance in comparison with the single server system.

Design and Implementation of Streaming Media Server Cluster Based on FFMpeg

Science.gov (United States)

Zhao, Hong; Zhou, Chun-long; Jin, Bao-zhao

2015-01-01

Poor performance and network congestion are commonly observed in the streaming media single server system. This paper proposes a scheme to construct a streaming media server cluster system based on FFMpeg. In this scheme, different users are distributed to different servers according to their locations and the balance among servers is maintained by the dynamic load-balancing algorithm based on active feedback. Furthermore, a service redirection algorithm is proposed to improve the transmission efficiency of streaming media data. The experiment results show that the server cluster system has significantly alleviated the network congestion and improved the performance in comparison with the single server system. PMID:25734187

Exposure to BPA in Children—Media-Based and Biomonitoring-Based Approaches

Directory of Open Access Journals (Sweden)

Krista L.Y. Christensen

2014-04-01

Full Text Available Bisphenol A (BPA is used in numerous industrial and consumer product applications resulting in ubiquitous exposure. Children’s exposure is of particular concern because of evidence of developmental effects. Childhood exposure is estimated for different age groups in two ways. The “forward” approach uses information on BPA concentrations in food and other environmental media (air, water, etc. combined with average contact rates for each medium. The “backward” approach relies on urinary biomonitoring, extrapolating backward to the intake which would have led to the observed biomarker level. The forward analysis shows that BPA intakes are dominated by canned food consumption, and that intakes are higher for younger ages. Mean intake estimates ranged from ~125 ng/kg-day for 1 year-olds to ~73 ng/kg-day among 16–20 years olds. Biomonitoring-based intakes show the same trend of lower intakes for older children, with an estimate of 121 (median to 153 (mean ng/kg-day for 2–6 years, compared with 33 (median to 53–66 (mean ng/kg-day for 16–20 years. Infant intakes were estimated to range from ~46 to 137 ng/kg-day. Recognizing uncertainties and limitations, this analysis suggests that the “forward” and “backward” methods provide comparable results and identify canned foods as a potentially important source of BPA exposure for children.

Numerical and analytical assessment of radon diffusion in various media and potential of charcoal as radon detector

Science.gov (United States)

Rybalkin, Andrey

Numerical assessments of radon diffusion together with analytical estimates for short-time and long-time exposure were the first objective of this thesis with the goal to demonstrate how radon propagates in various media. Theoretical predictions were compared to numerical simulations, and obtained values of total radon activities inside each material match quite well with the analytical estimates. These estimates, for activated and nonactivated charcoal, were then used to evaluate the possibility of designing a charcoal system to be used as a radon detector. Another objective was to use nonactivated charcoal samples and measure the level of radon accumulation, and use these data to estimate radon diffusion and adsorption coefficients. The analytical approach was developed to estimate these values. Radon adsorption coefficient in nonactivated charcoal was found to be from 0.2 to 0.4 m3/kg. Radon diffusion coefficient for nonactivated charcoal is in the range of 1.2×10-11 to 5.1×10-10 m2/s in comparison to activated charcoal with adsorption coefficient of 4 m3/kg and diffusion coefficient of 1.43×10-9 m2/s. The third objective was to use GEANT4 numerical code to simulate decay of 238U series and 222Rn in an arbitrary soil sample. Based on that model, the goal was to provide a guideline for merging GEANT4 radioactive decay modeling with the diffusion of radon in a soil sample. It is known that radon can be used as an earthquake predictor by measuring its concentration in groundwater, or if possible, along the faults. Numerical simulations of radon migration by diffusion only were made to estimate how fast and how far radon can move along the fault strands. Among the known cases of successful correlations between radon concentration anomalies and earthquake are the 1966 Tashkent and 1976 Songpan-Pingwu earthquakes. Thus, an idea of radon monitoring along the Wasatch Fault, using system of activated/nonactivated charcoals together with solid state radon detectors is

Leveraging Social Media to Promote Evidence-Based Continuing Medical Education.

Science.gov (United States)

Flynn, Simone; Hebert, Paul; Korenstein, Deborah; Ryan, Mark; Jordan, William B; Keyhani, Salomeh

2017-01-01

New dissemination methods are needed to engage physicians in evidence-based continuing medical education (CME). To examine the effectiveness of social media in engaging physicians in non-industry-sponsored CME. We tested the effect of different media platforms (e-mail, Facebook, paid Facebook and Twitter), CME topics, and different "hooks" (e.g., Q&A, clinical pearl and best evidence) on driving clicks to a landing site featuring non-industry sponsored CME. We modelled the effects of social media platform, CME topic, and hook using negative binomial regression on clicks to a single landing site. We used clicks to landing site adjusted for exposure and message number to calculate rate ratios. To understand how physicians interact with CME content on social media, we also conducted interviews with 10 physicians. The National Physicians Alliance (NPA) membership. NPA e-mail recipients, Facebook followers and friends, and Twitter followers. Clicks to the NPA's CME landing site. On average, 4,544 recipients received each message. Messages generated a total of 592 clicks to the landing site, for a rate of 5.4 clicks per 1000 recipients exposed. There were 5.4 clicks from e-mail, 11.9 clicks from Facebook, 5.5 clicks from paid Facebook, and 6.9 clicks from Twitter to the landing site for 1000 physicians exposed to each of 4 selected CME modules. A Facebook post generated 2.3x as many clicks to the landing site as did an e-mail after controlling for participant exposure, hook type and CME topic (pmedia might not be a preferred vehicle for disseminating CME. Social media has a modest impact on driving traffic to evidence-based CME options. Facebook had a superior effect on driving physician web traffic to evidence-based CME compared to other social media platforms and email.

An Laudau-Lifschitz theory based algorithm on calculating post-buckling configuration of a rod buckling in elastic media

Science.gov (United States)

Huang, Shicheng; Tan, Likun; Hu, Nan; Grover, Hannah; Chu, Kevin; Chen, Zi

This reserach introduces a new numerical approach of calculating the post-buckling configuration of a thin rod embedded in elastic media. The theoretical base is the governing ODEs describing the balance of forces and moments, the length conservation, and the physics of bending and twisting by Laudau and Lifschitz. The numerical methods applied in the calculation are continuation method and Newton's method of iteration in combination with spectrum method. To the authors' knowledge, it is the first trial of directly applying the L-L theory to numerically studying the phenomenon of rod buckling in elastic medium. This method accounts for nonlinearity of geometry, thus is capable of calculating large deformation. The stability of this method is another advantage achieved by expressing the governing equations in a set of first-order derivative form. The wave length, amplitude, and decay effect all agree with the experiment without any further assumptions. This program can be applied to different occasions with varying stiffness of the elastic medai and rigidity of the rod.

Numerical Multilevel Upscaling for Incompressible Flow in Reservoir Simulation: An Element-based Algebraic Multigrid (AMGe) Approach

DEFF Research Database (Denmark)

Christensen, Max la Cour; Villa, Umberto; Engsig-Karup, Allan Peter

2017-01-01

associated with non-planar interfaces between agglomerates, the coarse velocity space has guaranteed approximation properties. The employed AMGe technique provides coarse spaces with desirable local mass conservation and stability properties analogous to the original pair of Raviart-Thomas and piecewise......We study the application of a finite element numerical upscaling technique to the incompressible two-phase porous media total velocity formulation. Specifically, an element agglomeration based Algebraic Multigrid (AMGe) technique with improved approximation proper ties [37] is used, for the first...... discontinuous polynomial spaces, resulting in strong mass conservation for the upscaled systems. Due to the guaranteed approximation properties and the generic nature of the AMGe method, recursive multilevel upscaling is automatically obtained. Furthermore, this technique works for both structured...

Numerical investigation into premixed hydrogen combustion within two-stage porous media burner of 1 kW solid oxide fuel cell system

Energy Technology Data Exchange (ETDEWEB)

Yen Tzu-Hsiang; Chen Bao-Dong [Refining and Manufacturing Research Institute, CPC Corporation, Chia-Yi City 60036, Taiwan (China); Hong Wen-Tang; Tsai Yu-Ching; Wang Hung-Yu; Huang Cheng-Nan; Lee Chien-Hsiung [Institute of Nuclear Energy Research Atomic Energy Council, Taoyuan County 32546, Taiwan (China)

2010-07-01

Numerical simulations are performed to analyze the combustion of the anode off-gas / cathode off-gas mixture within the two-stage porous media burner of a 1 kW solid oxide fuel cell (SOFC) system. In performing the simulations, the anode gas is assumed to be hydrogen and the combustion of the gas mixture is modeled using a turbulent flow model. The validity of the numerical model is confirmed by comparing the simulation results for the flame barrier temperature and the porous media temperature with the corresponding experimental results. Simulations are then performed to investigate the effects of the hydrogen content and the burner geometry on the temperature distribution within the burner and the corresponding operational range. It is shown that the maximum flame temperature increases with an increasing hydrogen content. In addition, it is found that the burner has an operational range of 1.2--6.5 kW when assigned its default geometry settings (i.e. a length and diameter of 0.17 m and 0.06 m, respectively), but increases to 2--9 kW and 2.6--11.5 kW when the length and diameter are increased by a factor of 1.5, respectively. Finally, the operational range increases to 3.5--16.5 kW when both the diameter and the length of the burner are increased by a factor of 1.5.

Numerical investigations of solute transport in bimodal porous media under dynamic boundary conditions

Science.gov (United States)

Cremer, Clemens; Neuweiler, Insa; Bechtold, Michel; Vanderborght, Jan

2016-04-01

behavior depends on the magnitude of the flow rates and hydraulic conductivity curves of the materials. Based on the unsaturated hydraulic conductivity at the intersection point of conductivity curves, we are able to define an estimate of flow rates at which the dynamic of the upper boundary condition significantly alters preferential flow paths through the system. If flow rates are low, with regard to the materials hydraulic conductivity at the intersection point, the influence of dynamic boundary conditions is small. If flow rates are in the range of the unsaturated hydraulic conductivity at intersection, solute is trapped in the fine material during upwards transport, which results in a more pronounced tailing. For flow rates exceeding the intersection conductivity, a redistribution at the soil surface can occur. References: Bechtold, M., S. Haber-Pohlmeier, J. Vanderborght, A. Pohlmeier, T.P.A. Ferré and H. Veerecken. 2011a. Near-surface solute redistribution during evaporation. Geophys. Res. Lett., 38, L17404, doi:10.1029/2011GL048147. Bechtold, M., J. Vanderborght, O. Ippisch and H. Vereecken. 2011b. Efficient random walk particle tracking algorithm for advective dispersive transport in media with discontinuous dispersion coefficients and water contents. Water Resour. Res., 47, W10526, doi: 10.1029/2010WR010267. Ippisch O., H.-J. Vogel and P. Bastian. 2006. Validity limits fort he van Genuchten-Mualem model and implications for parameter estimation and numerical simulation. Adv. Water Resour., 29, 1780-1789, doi: 10.1016/j.advwateres.2005.12.011. Lehmann, P. and D. Or. 2009. Evaporation and capillary coupling across vertical textural contrasts in porous media. Phys. Rev. E, 80, 046318, doi:10.1103/PhysRevE.80.046318.

Light Focusing through Scattering Media by Particle Swarm Optimization

International Nuclear Information System (INIS)

Huang Hui-Ling; Chen Zi-Yang; Sun Cun-Zhi; Liu Ji-Lin; Pu Ji-Xiong

2015-01-01

We demonstrate light focusing through scattering media by introducing particle swarm optimization for modulating the phase wavefront. Light refocusing is simulated numerically based on the angular spectrum method and the circular Gaussian distribution model of the scattering media. Experimentally, a spatial light modulator is used to control the phase of incident light, so as to make the scattered light converge to a focus. The influence of divided segments of input light and the effect of the number of iterations on light intensity enhancement are investigated. Simulation results are found to be in good agreement with the theoretical analysis for light refocusing. (paper)

Well test analysis in fractured media

Energy Technology Data Exchange (ETDEWEB)

Karasaki, K.

1987-04-01

The behavior of fracture systems under well test conditions and methods for analyzing well test data from fractured media are investigated. Several analytical models are developed to be used for analyzing well test data from fractured media. Numerical tools that may be used to simulate fluid flow in fractured media are also presented. Three types of composite models for constant flux tests are investigated. These models are based on the assumption that a fracture system under well test conditions may be represented by two concentric regions, one representing a small number of fractures that dominates flow near the well, and the other representing average conditions farther away from the well. Type curves are presented that can be used to find the flow parameters of these two regions and the extent of the inner concentric region. Several slug test models with different geometric conditions that may be present in fractured media are also investigated. A finite element model that can simulate transient fluid flow in fracture networks is used to study the behavior of various two-dimensional fracture systems under well test conditions. A mesh generator that can be used to model mass and heat flow in a fractured-porous media is presented.

A second order radiative transfer equation and its solution by meshless method with application to strongly inhomogeneous media

Energy Technology Data Exchange (ETDEWEB)

Zhao, J.M., E-mail: jmzhao@hit.edu.cn [School of Energy Science and Engineering, Harbin Institute of Technology, 92 West Dazhi Street, Harbin 150001, People' s Republic of China (China); Tan, J.Y., E-mail: tanjy@hit.edu.cn [School of Auto Engineering, Harbin Institute of Technology at Weihai, 2 West Wenhua Road, Weihai 264209, People' s Republic of China (China); Liu, L.H., E-mail: lhliu@hit.edu.cn [School of Energy Science and Engineering, Harbin Institute of Technology, 92 West Dazhi Street, Harbin 150001, People' s Republic of China (China); School of Auto Engineering, Harbin Institute of Technology at Weihai, 2 West Wenhua Road, Weihai 264209, People' s Republic of China (China)

2013-01-01

A new second order form of radiative transfer equation (named MSORTE) is proposed, which overcomes the singularity problem of a previously proposed second order radiative transfer equation [J.E. Morel, B.T. Adams, T. Noh, J.M. McGhee, T.M. Evans, T.J. Urbatsch, Spatial discretizations for self-adjoint forms of the radiative transfer equations, J. Comput. Phys. 214 (1) (2006) 12-40 (where it was termed SAAI), J.M. Zhao, L.H. Liu, Second order radiative transfer equation and its properties of numerical solution using finite element method, Numer. Heat Transfer B 51 (2007) 391-409] in dealing with inhomogeneous media where some locations have very small/zero extinction coefficient. The MSORTE contains a naturally introduced diffusion (or second order) term which provides better numerical property than the classic first order radiative transfer equation (RTE). The stability and convergence characteristics of the MSORTE discretized by central difference scheme is analyzed theoretically, and the better numerical stability of the second order form radiative transfer equations than the RTE when discretized by the central difference type method is proved. A collocation meshless method is developed based on the MSORTE to solve radiative transfer in inhomogeneous media. Several critical test cases are taken to verify the performance of the presented method. The collocation meshless method based on the MSORTE is demonstrated to be capable of stably and accurately solve radiative transfer in strongly inhomogeneous media, media with void region and even with discontinuous extinction coefficient.

Dispersive effects on multicomponent transport through porous media

Science.gov (United States)

Dutta, Sourav; Daripa, Prabir

2017-11-01

We use a hybrid numerical method to solve a global pressure based porous media flow model of chemical enhanced oil recovery. This is an extension of our recent work. The numerical method is based on the use of a discontinuous finite element method and the modified method of characteristics. The impact of molecular diffusion and mechanical dispersion on the evolution of scalar concentration distributions are studied through numerical simulations of various flooding schemes. The relative importance of the advective, capillary diffusive and dispersive fluxes are compared over different flow regimes defined in the parameter space of Capillary number, Peclet number, longitudinal and transverse dispersion coefficients. Such studies are relevant for the design of effective injection policies and determining optimal combinations of chemical components for improving recovery. This work has been possible due to financial support from the U.S. National Science Foundation Grant DMS-1522782.

Numerical Modeling of Anaerobic Microzones Development in Bulk Oxic Porous Media: An Assessment of Different Microzone Formation Processes

Science.gov (United States)

Roy Chowdhury, S.; Zarnetske, J. P.; Briggs, M. A.; Day-Lewis, F. D.; Singha, K.

2017-12-01

Soil and groundwater research indicates that unique biogeochemical "microzones" commonly form within bulk soil masses. The formation of these microzones at the pore-scale has been attributed to a number of causes, including variability of in situ carbon or nutrient sources, intrinsic physical conditions that lead to dual-porosity and mass transfer conditions, or microbial bioclogging of the porous media. Each of these causes, while documented in different porous media systems, potentially can lead to the presence of anaerobic pores residing in a bulk oxic domain. The relative role of these causes operating independently or in conjunction with each other to form microzones is not known. Here, we use a single numerical modeling framework to assess the relative roles of each process in creating anaerobic microzones. Using a two-dimensional pore-network model, coupled with a microbial growth model based on Monod kinetics, simulations were performed to explore the development of these anoxic microzones and their fate under a range of hydrologic, nutrient, and microbial conditions. Initial results parameterized for a stream-groundwater exchange environment (i.e., a hyporheic zone) indicate that external forcing of fluid flux in the domain is a key soil characteristic to anaerobic microzone development as fluid flux governs the nutrient flux. The initial amount of biomass present in the system also plays a major role in the development of the microzones. In terms of dominant in situ causes, the intrinsic physical structure of the local pore space is found to play the key role in development of anaerobic sites by regulating fluxes to reaction sites. Acknowledging and understanding the drivers of these microzones will improve the ability of multiple disciplines to measure and model reactive mass transport in soils and assess if they play a significant role for particular biogeochemical processes and ecosystem functions, such as denitrification and greenhouse gas production.

Validity of "Hi_Science" as instructional media based-android refer to experiential learning model

Science.gov (United States)

Qamariah, Jumadi, Senam, Wilujeng, Insih

2017-08-01

Hi_Science is instructional media based-android in learning science on material environmental pollution and global warming. This study is aimed: (a) to show the display of Hi_Science that will be applied in Junior High School, and (b) to describe the validity of Hi_Science. Hi_Science as instructional media created with colaboration of innovative learning model and development of technology at the current time. Learning media selected is based-android and collaborated with experiential learning model as an innovative learning model. Hi_Science had adapted student worksheet by Taufiq (2015). Student worksheet had very good category by two expert lecturers and two science teachers (Taufik, 2015). This student worksheet is refined and redeveloped in android as an instructional media which can be used by students for learning science not only in the classroom, but also at home. Therefore, student worksheet which has become instructional media based-android must be validated again. Hi_Science has been validated by two experts. The validation is based on assessment of meterials aspects and media aspects. The data collection was done by media assessment instrument. The result showed the assessment of material aspects has obtained the average value 4,72 with percentage of agreement 96,47%, that means Hi_Science on the material aspects is in excellent category or very valid category. The assessment of media aspects has obtained the average value 4,53 with percentage of agreement 98,70%, that means Hi_Science on the media aspects is in excellent category or very valid category. It was concluded that Hi_Science as instructional media can be applied in the junior high school.

Plant-based culture media: Efficiently support culturing rhizobacteria and correctly mirror their in-situ diversity.

Science.gov (United States)

Youssef, Hanan H; Hamza, Mervat A; Fayez, Mohamed; Mourad, Elhussein F; Saleh, Mohamed Y; Sarhan, Mohamed S; Suker, Ragab M; Eltahlawy, Asmaa A; Nemr, Rahma A; El-Tahan, Mahmod; Ruppel, Silke; Hegazi, Nabil A

2016-03-01

Our previous publications and the data presented here provide evidences on the ability of plant-based culture media to optimize the cultivability of rhizobacteria and to support their recovery from plant-soil environments. Compared to the tested chemically-synthetic culture media (e.g. nutrient agar and N-deficient combined-carbon sources media), slurry homogenates, crude saps, juices and powders of cactus (Opuntia ficus-indica) and succulent plants (Aloe vera and Aloe arborescens) were rich enough to support growth of rhizobacteria. Representative isolates of Enterobacter spp., Klebsiella spp., Bacillus spp. and Azospirillum spp. exhibited good growth on agar plates of such plant-based culture media. Cell growth and biomass production in liquid batch cultures were comparable to those reported with the synthetic culture media. In addition, the tested plant-based culture media efficiently recovered populations of rhizobacteria associated to plant roots. Culturable populations of >10(6)-10(8) cfu g(-1) were recovered from the ecto- and endo-rhizospheres of tested host plants. More than 100 endophytic culture-dependent isolates were secured and subjected to morphophysiological identification. Factor and cluster analyses indicated the unique community structure, on species, genera, class and phyla levels, of the culturable population recovered with plant-based culture media, being distinct from that obtained with the chemically-synthetic culture media. Proteobacteria were the dominant (78.8%) on plant-based agar culture medium compared to only 31% on nutrient agar, while Firmicutes prevailed on nutrient agar (69%) compared to the plant-based agar culture media (18.2%). Bacteroidetes, represented by Chryseobacterium indologenes, was only reported (3%) among the culturable rhizobacteria community of the plant-based agar culture medium.

Numerical Analysis of Multiscale Computations

CERN Document Server

Engquist, Björn; Tsai, Yen-Hsi R

2012-01-01

This book is a snapshot of current research in multiscale modeling, computations and applications. It covers fundamental mathematical theory, numerical algorithms as well as practical computational advice for analysing single and multiphysics models containing a variety of scales in time and space. Complex fluids, porous media flow and oscillatory dynamical systems are treated in some extra depth, as well as tools like analytical and numerical homogenization, and fast multipole method.

Media multitasking, attention, and distraction

DEFF Research Database (Denmark)

Aagaard, Jesper

2015-01-01

Students often multitask with technologies such as computers, laptops, tablets and smartphones during class. Unfortunately, numerous empirical studies firmly establish a significant drop in academic performance caused by this media multitasking. In this paper it is argued that cognitive studies may...... is necessary to account for the materiality of practice. Notions of embodied habits and technical mediation are introduced, and an example of a postphenomenological account of media multitasking is introduced. It is argued that this approach enables researchers to investigate media multitasking as it occurs...

Enhancing the numerical aperture of lenses using ZnO nanostructure-based turbid media

International Nuclear Information System (INIS)

Khokhra, Richa; Barman, Partha Bir; Kumar, Rajesh; Kumar, Manoj; Rawat, Nitin; Jang, Hwanchol; Lee, Heung-No

2013-01-01

Nanosheets, nanoparticles, and microstructures of ZnO were synthesized via a wet chemical method. ZnO films with a thickness of 44–46 μm were fabricated by spray coating, and these have been investigated for their potential use in turbid lens applications. A morphology-dependent comparative study of the transmittance of ZnO turbid films was conducted. Furthermore, these ZnO turbid films were used to enhance the numerical aperture (NA) of a Nikon objective lens. The variation in NA with different morphologies was explained using size-dependent scattering by the fabricated films. A maximum NA of around 1.971 of the objective lens with a turbid film of ZnO nanosheets was achieved. (paper)

Regeneration of Iron-based Adsorptive Media Used for Removing Arsenic from Groundwater

Science.gov (United States)

The journal article will describe batch and column regeneration tests and results that were conducted on six exhausted iron media products to determine whether an iron based media can be successfully regenerated and reused.

Iodine-based contrast media, multiple myeloma and monoclonal gammopathies: literature review and ESUR Contrast Media Safety Committee guidelines.

Science.gov (United States)

Stacul, Fulvio; Bertolotto, Michele; Thomsen, Henrik S; Pozzato, Gabriele; Ugolini, Donatella; Bellin, Marie-France; Bongartz, Georg; Clement, Olivier; Heinz-Peer, Gertraud; van der Molen, Aart; Reimer, Peter; Webb, Judith A W

2018-02-01

Many radiologists and clinicians still consider multiple myeloma (MM) and monoclonal gammopathies (MG) a contraindication for using iodine-based contrast media. The ESUR Contrast Media Safety Committee performed a systematic review of the incidence of post-contrast acute kidney injury (PC-AKI) in these patients. A systematic search in Medline and Scopus databases was performed for renal function deterioration studies in patients with MM or MG following administration of iodine-based contrast media. Data collection and analysis were performed according to the PRISMA statement 2009. Eligibility criteria and methods of analysis were specified in advance. Cohort and case-control studies reporting changes in renal function were included. Thirteen studies were selected that reported 824 iodine-based contrast medium administrations in 642 patients with MM or MG, in which 12 unconfounded cases of PC-AKI were found (1.6 %). The majority of patients had intravenous urography with high osmolality ionic contrast media after preparatory dehydration and purgation. MM and MG alone are not risk factors for PC-AKI. However, the risk of PC-AKI may become significant in dehydrated patients with impaired renal function. Hypercalcaemia may increase the risk of kidney damage, and should be corrected before contrast medium administration. Assessment for Bence-Jones proteinuria is not necessary. • Monoclonal gammopathies including multiple myeloma are a large spectrum of disorders. • In monoclonal gammopathy with normal renal function, PC-AKI risk is not increased. • Renal function is often reduced in myeloma, increasing the risk of PC-AKI. • Correction of hypercalcaemia is necessary in myeloma before iodine-based contrast medium administration. • Bence-Jones proteinuria assessment in myeloma is unnecessary before iodine-based contrast medium administration.

The Golden Ratio in Time-based Media

Directory of Open Access Journals (Sweden)

Emily Verba

2013-06-01

The proliferation of moving images we face on a daily basis is cause for great concern, as we have increasingly less free time in our days. Informative and pleasing images are buried in an avalanche of visual rubbish, constantly streaming into our physical and virtual worlds. Time-based media has the ability to expand and contract movement, thus directing the way viewers experience and spend their time. This investigation presupposes that editing moving images via increments of time determined by the golden ratio may streamline messages, isolating what is most symbolic and effectively communicative within a mathematical framework. A physiological and psychological benefit is created for viewers; there is no wasted time or space. Image-makers and visual communicators have a responsibility to create only that which is useful and/or aesthetically pleasing. An investigation into the temporal structure of time-based media, using mathematical algorithms derived from the golden ratio, has led to the aim of creating through it a viable solution for the implementation of visual communication messages in today's society.

A scalable variational inequality approach for flow through porous media models with pressure-dependent viscosity

Science.gov (United States)

Mapakshi, N. K.; Chang, J.; Nakshatrala, K. B.

2018-04-01

Mathematical models for flow through porous media typically enjoy the so-called maximum principles, which place bounds on the pressure field. It is highly desirable to preserve these bounds on the pressure field in predictive numerical simulations, that is, one needs to satisfy discrete maximum principles (DMP). Unfortunately, many of the existing formulations for flow through porous media models do not satisfy DMP. This paper presents a robust, scalable numerical formulation based on variational inequalities (VI), to model non-linear flows through heterogeneous, anisotropic porous media without violating DMP. VI is an optimization technique that places bounds on the numerical solutions of partial differential equations. To crystallize the ideas, a modification to Darcy equations by taking into account pressure-dependent viscosity will be discretized using the lowest-order Raviart-Thomas (RT0) and Variational Multi-scale (VMS) finite element formulations. It will be shown that these formulations violate DMP, and, in fact, these violations increase with an increase in anisotropy. It will be shown that the proposed VI-based formulation provides a viable route to enforce DMP. Moreover, it will be shown that the proposed formulation is scalable, and can work with any numerical discretization and weak form. A series of numerical benchmark problems are solved to demonstrate the effects of heterogeneity, anisotropy and non-linearity on DMP violations under the two chosen formulations (RT0 and VMS), and that of non-linearity on solver convergence for the proposed VI-based formulation. Parallel scalability on modern computational platforms will be illustrated through strong-scaling studies, which will prove the efficiency of the proposed formulation in a parallel setting. Algorithmic scalability as the problem size is scaled up will be demonstrated through novel static-scaling studies. The performed static-scaling studies can serve as a guide for users to be able to select

A case report on a severe anaphylaxis reaction to Gadolinium-based MR contrast media

Energy Technology Data Exchange (ETDEWEB)

Park, Juil; Kim, Tae Hyung; Park, Chang Min; Yoon, Soon Ho; Lee, Whal; Kang, Hye Ryun; Choi, Young Hun [Seoul National University Hospital, Seoul (Korea, Republic of)

2017-02-15

Acute hypersensitivity reactions to gadolinium-based magnetic resonance (MR) contrast media have been shown to have a much lower incidence and they are generally milder in terms of severity than acute adverse reactions associated with the use of iodinated contrast media for computed tomography scans. However, even though it is rare, a severe hypersensitivity reaction to MR contrast media can occur. Here we present the case of a 66-year-old woman who experienced a severe hypersensitivity reaction after administration of gadolinium-based contrast media without a previous history of allergies.

Numerical simulation of the transport phenomena due to sudden heating in porous media

Energy Technology Data Exchange (ETDEWEB)

Lei, S.Y.; Zheng, G.Y.; Wang, B.X.; Yang, R.G.; Xia, C.M.

1997-07-01

Such process as wet porous media suddenly heated by hot fluids frequently occurs in nature and in industrial applications. The three-variable simulation model was developed to predict violent transport phenomena due to sudden heating in porous media. Two sets of independent variables were applied to different regions in porous media in the simulation. For the wet zone, temperature, wet saturation and air pressure were used as the independent variables. For the dry zone, the independent variables were temperature, vapor pressure and air pressure. The model simulated two complicated transport processes in wet unsaturated porous media which is suddenly heated by melting metal or boiling water. The effect of the gas pressure is also investigated on the overall transport phenomena.

Analysis of Dynamic Fracture Compliance Based on Poroelastic Theory - Part II: Results of Numerical and Experimental Tests

Science.gov (United States)

Wang, Ding; Ding, Pin-bo; Ba, Jing

2018-03-01

In Part I, a dynamic fracture compliance model (DFCM) was derived based on the poroelastic theory. The normal compliance of fractures is frequency-dependent and closely associated with the connectivity of porous media. In this paper, we first compare the DFCM with previous fractured media theories in the literature in a full frequency range. Furthermore, experimental tests are performed on synthetic rock specimens, and the DFCM is compared with the experimental data in the ultrasonic frequency band. Synthetic rock specimens saturated with water have more realistic mineral compositions and pore structures relative to previous works in comparison with natural reservoir rocks. The fracture/pore geometrical and physical parameters can be controlled to replicate approximately those of natural rocks. P- and S-wave anisotropy characteristics with different fracture and pore properties are calculated and numerical results are compared with experimental data. Although the measurement frequency is relatively high, the results of DFCM are appropriate for explaining the experimental data. The characteristic frequency of fluid pressure equilibration calculated based on the specimen parameters is not substantially less than the measurement frequency. In the dynamic fracture model, the wave-induced fluid flow behavior is an important factor for the fracture-wave interaction process, which differs from the models at the high-frequency limits, for instance, Hudson's un-relaxed model.

European media law

NARCIS (Netherlands)

Castendyk, O.; Dommering, E.; Scheuer, A.

2008-01-01

European Union legislation concerning electronic communications media is firmly established as an essential part of the law in the field in Europe. From relevant provisions of the European Convention of Human Rights and the EC Treaty to numerous directives, the most recent being the Audiovisual

Peace journalism and radical media ethics

Directory of Open Access Journals (Sweden)

Marta Natalia Lukacovic

2016-10-01

Full Text Available The radical characteristics of peace journalism position it as a model that expands the current understandings of normative media theory. Peace journalism echoes the most innovative calls of media ethicists, such as the proposition of radical media ethics. This idea asserts the necessity to expand media ethics to better fit the globalized and democratized media landscape, which is enabled by contemporary new media technologies. Essentially a global shift, among professionals as well as regular citizen-communicators, should advance towards conflict sensitivity in order to transcend the culturally violent elements of covering conflicts. Similar efforts will bring numerous challenges, however, these efforts are tremendously worthwhile with their potential to assist the creation of more peace-prone global societies.

Physicochemical and numerical modeling of electrokinetics in inhomogenous matrices

DEFF Research Database (Denmark)

Paz-Garcia, Juan Manuel

A physicochemical model has been proposed based on the Nernst-Planck-Poisson system. The model includes the transport of water through the porous media, the monitoring of the degree of saturation, the pH value and the porosity throughout the domain; and a comprehensive set of chemical and electrochemical reactions...... is mainly based on a finite elements method for the integration of the transient system of partial differential equations coupled with a Newton-Raphson method for computing chemical equilibrium. During the development of the proposed physicochemical and numerical model, different electrokinetic systems have...

Numerical modeling for flame dynamics and combustion processes in a two-sectional porous burner with a detailed chemistry

Energy Technology Data Exchange (ETDEWEB)

Shin, Young Jun; Kim, Yong Mo [Hanyang University, Seoul (Korea, Republic of)

2014-11-15

A two-dimensional model with the detailed chemistry and variable transport properties has been applied to numerically investigate the combustion processes and flame dynamics in the bilayer porous burner. To account for the velocity transition and diffusion influenced by solid matrix, porosity terms are included in the governing equations. Heat transfer coefficient is calculated by Nusselt number to reflect the effect of gas velocity, pore diameter, and material properties. The detailed chemistry is based on GRI 2.11. Numerical results indicate that the present approach is capable of the essential features of the premixed combustion in the porous media in terms of the precise flame structure, pollutant formation, and stabilization characteristics. In this bilayer porous burner, the heat transferred from the downstream flame zone is conducted to the upstream flame region through the solid matrix. This heat transfer process through the solid matrix substantially influences the flame structure and stabilization characteristics in the porous media. The predicted results are compared with experimental data in terms of temperature for gaseous mixture and solid matrix, CO and NO emission level. Based on numerical results, a precise comparison has been made for the freely propagating premixed flames and the premixed flames with a porous media for various inlet velocities.

Comparison of GPU-Based Numerous Particles Simulation and Experiment

International Nuclear Information System (INIS)

Park, Sang Wook; Jun, Chul Woong; Sohn, Jeong Hyun; Lee, Jae Wook

2014-01-01

The dynamic behavior of numerous grains interacting with each other can be easily observed. In this study, this dynamic behavior was analyzed based on the contact between numerous grains. The discrete element method was used for analyzing the dynamic behavior of each particle and the neighboring-cell algorithm was employed for detecting their contact. The Hertzian and tangential sliding friction contact models were used for calculating the contact force acting between the particles. A GPU-based parallel program was developed for conducting the computer simulation and calculating the numerous contacts. The dam break experiment was performed to verify the simulation results. The reliability of the program was verified by comparing the results of the simulation with those of the experiment

Enteric virus removal inactivation by coal-based media

Energy Technology Data Exchange (ETDEWEB)

Gupta, A.; Chaudhuri, M. [Indian Institute of Technology, Kanpur (India). Dept. of Civil Engineering

1995-02-01

Four coal-based media, viz. alum-pretreated or ferric hydroxide-impregnated Giridih bituminous coal and lignite (alum-GBC, Fe-GBC; alum-lignite and Fe-Lignite) were laboratory tested to assess their potential in removing/inactivating enteric viruses in water. Batch-sorption screening tests, employing a poliovirus-spiked canal water, indicated high poliovirus sorption by Fe-GBC and alum-GBC in a short contact time of 5 min. Based on the results of further batch-sorption tests, using silver incorporated media (alum/Ag-GBC, alum-GBC-Ag and Fe-GBC-Ag), as well as aesthetic water quality consideration and previous findings on removal of coliforms and turbidity, alum/Ag-GBC, alum-GBC and alum-GBC-AG were included in downflow column studies employing poliovirus-spiked canal water. All three media showed potential in removing/inactivating enteric viruses. In a separate column study employing a joint challenge of poliovirus and rotavirus, alum/Ag-GBC removed 59.3-86.5% of the viruses along with more than 99% reduction in indigenous heterotrophic bacteria. Alum/silver-pretreated bituminous coal medium appears promising for use in household water filters in rural areas of the developing world. However, improved medium preparation to further enhance its efficiency is needed; also, its efficacy in removing/inactivating indigenous enteric bacteria, viruses and protozoa has to be ensured and practicalities or economics of application need to be considered.

America’s Battle for Media Democracy: The Triumph of Corporate Libertarianism and the Future of Media Reform

Directory of Open Access Journals (Sweden)

Victor Pickard

2014-11-01

Full Text Available This contribution is a recording of the CAMRI research seminar held at the University of Westminster on November 19, 2014, in which Victor Pickard presented his book "America’s Battle for Media Democracy: The Triumph of Corporate Libertarianism and the Future of Media Reform": http://www.cambridge.org/gb/academic/subjects/politics-international-relations/american-government-politics-and-policy/americas-battle-media-democracy-triumph-corporate-libertarianism-and-future-media-reform Why do American media have so few public interest regulations? How did the American media system become dominated by a few corporations, and why are structural problems like market failures routinely avoided in media policy discourse? By tracing the answers to many of these questions back to media policy battles in the 1940s, Victor Pickard explains how this happened and why it matters today. Drawing from extensive archival research, the book uncovers the American media system’s historical roots and normative foundations. His book charts the rise and fall of a forgotten media reform movement to recover alternatives and paths not taken. As much about the present and future as it is about the past, the book proposes policies for remaking media based on democratic values for the digital age. Victor Pickard is an assistant professor at the Annenberg School for Communication at the University of Pennsylvania. Previously he taught media studies at NYU and the University of Virginia, and he worked on media policy in Washington, D.C. as a Senior Research Fellow at the media reform organization Free Press, the public policy think tank the New America Foundation, and Congresswoman Diane Watson’s office. He has published numerous journal articles and book chapters on the history and political economy of media institutions and media reform activism. His op-eds on media policy debates and the future of journalism have appeared in news outlets like The Guardian, The Seattle

Potentials of Social Media as Media Facility of Tourism Promotion Based on Community Participation

OpenAIRE

Romadhan, Mohammad Insan; Rusmana, Dewi Sri Andika

2018-01-01

The potential of social media as a media of tourism promotion is vastly massive. Nevertheless, the problem is on how to get social media can be widely known and has abundant followers for the publicized content could be accepted by the crowd. Normally, social media of a tourism promotion is integrated with conventional media like television, radio and newspapers. What if a region does not have large funds to interact with the conventional media, such issue be overcome with community participa...

Recruiting Pregnant Patients for Survey Research: A Head to Head Comparison of Social Media-Based Versus Clinic-Based Approaches.

Science.gov (United States)

Admon, Lindsay; Haefner, Jessica K; Kolenic, Giselle E; Chang, Tammy; Davis, Matthew M; Moniz, Michelle H

2016-12-21

Recruiting a diverse sample of pregnant women for clinical research is a challenging but crucial task for improving obstetric services and maternal and child health outcomes. To compare the feasibility and cost of recruiting pregnant women for survey research using social media-based and clinic-based approaches. Advertisements were used to recruit pregnant women from the social media website Facebook. In-person methods were used to recruit pregnant women from the outpatient clinic of a large, tertiary care center. In both approaches, potential respondents were invited to participate in a 15-minute Web-based survey. Each recruitment method was monitored for 1 month. Using bivariate statistics, we compared the number, demographic characteristics, and health characteristics of women recruited and the cost per completed survey for each recruitment method. The social media-based approach recruited 1178 women and the clinic-based approach recruited 219 women. A higher proportion of subjects recruited through social media identified as African American (29.4%, 207/705 vs 11.2%, 20/179), reported household incomes social media had earned a college degree (21.3%, 153/717 vs 62.3%, 114/183) and were married or in a domestic partnership (45.7%, 330/722 vs 72.1%, 132/183; all PSocial media-based recruitment costs were US $14.63 per completed survey, compared with US $23.51 for clinic-based recruitment. Web-based recruitment through a social networking platform is a feasible, inexpensive, and rapid means of recruiting a large, diverse sample of pregnant women for survey research. ©Lindsay Admon, Jessica K Haefner, Giselle E Kolenic, Tammy Chang, Matthew M Davis, Michelle H Moniz. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 21.12.2016.

Modeling of flow in faulted and fractured media

Energy Technology Data Exchange (ETDEWEB)

Oeian, Erlend

2004-03-01

The work on this thesis has been done as part of a collaborative and inter disciplinary effort to improve the understanding of oil recovery mechanisms in fractured reservoirs. This project has been organized as a Strategic University Program (SUP) at the University of Bergen, Norway. The complex geometries of fractured reservoirs combined with flow of several fluid phases lead to difficult mathematical and numerical problems. In an effort to try to decrease the gap between the geological description and numerical modeling capabilities, new techniques are required. Thus, the main objective has been to improve the ATHENA flow simulator and utilize it within a fault modeling context. Specifically, an implicit treatment of the advection dominated mass transport equations within a domain decomposition based local grid refinement framework has been implemented. Since large computational tasks may arise, the implicit formulation has also been included in a parallel version of the code. Within the current limits of the simulator, appropriate up scaling techniques has also been considered. Part I of this thesis includes background material covering the basic geology of fractured porous media, the mathematical model behind the in-house flow simulator ATHENA and the additions implemented to approach simulation of flow through fractured and faulted porous media. In Part II, a set of research papers stemming from Part I is presented. A brief outline of the thesis follows below. In Chapt. 1 important aspects of the geological description and physical parameters of fractured and faulted porous media is presented. Based on this the scope of this thesis is specified having numerical issues and consequences in mind. Then, in Chapt. 2, the mathematical model and discretizations in the flow simulator is given followed by the derivation of the implicit mass transport formulation. In order to be fairly self-contained, most of the papers in Part II also includes the mathematical model

Modeling of flow in faulted and fractured media

Energy Technology Data Exchange (ETDEWEB)

Oeian, Erlend

2004-03-01

The work on this thesis has been done as part of a collaborative and inter disciplinary effort to improve the understanding of oil recovery mechanisms in fractured reservoirs. This project has been organized as a Strategic University Program (SUP) at the University of Bergen, Norway. The complex geometries of fractured reservoirs combined with flow of several fluid phases lead to difficult mathematical and numerical problems. In an effort to try to decrease the gap between the geological description and numerical modeling capabilities, new techniques are required. Thus, the main objective has been to improve the ATHENA flow simulator and utilize it within a fault modeling context. Specifically, an implicit treatment of the advection dominated mass transport equations within a domain decomposition based local grid refinement framework has been implemented. Since large computational tasks may arise, the implicit formulation has also been included in a parallel version of the code. Within the current limits of the simulator, appropriate up scaling techniques has also been considered. Part I of this thesis includes background material covering the basic geology of fractured porous media, the mathematical model behind the in-house flow simulator ATHENA and the additions implemented to approach simulation of flow through fractured and faulted porous media. In Part II, a set of research papers stemming from Part I is presented. A brief outline of the thesis follows below. In Chapt. 1 important aspects of the geological description and physical parameters of fractured and faulted porous media is presented. Based on this the scope of this thesis is specified having numerical issues and consequences in mind. Then, in Chapt. 2, the mathematical model and discretizations in the flow simulator is given followed by the derivation of the implicit mass transport formulation. In order to be fairly self-contained, most of the papers in Part II also includes the mathematical model

Prevalence and Correlates of Screen-Based Media Use among Youths with Autism Spectrum Disorders

OpenAIRE

Mazurek, Micah O.; Shattuck, Paul T.; Wagner, Mary; Cooper, Benjamin P.

2012-01-01

Anecdotal reports indicate that individuals with autism spectrum disorders (ASD) are often preoccupied with television, computers, and video games (screen-based media). However, few studies have examined this issue. The current study examined screen-based media use among a large, nationally representative sample of youths participating in the National Longitudinal Transition Study – 2 (NLTS2). The majority of youths with ASD (64.2%) spent most of their free time using non-social media (televi...

Increasing Student’s Correspondence Course Study Result with Development of Adobe Flash Android-Based Media

Directory of Open Access Journals (Sweden)

Devi Artha Bonita

2017-09-01

Full Text Available The purpose of this study is to produce an Adobe Flash-based Android learning media on subjects that have tested the feasibility of the media through validation testing increased students result. This type of research is research and development (R&D. This product is validated by material experts, media experts, and small groups and have been tasted in the experimental class. The results showed the development of Adobe Flash-based learning media Android is a significant improvement of students result.

Study of numerical schemes for two-phase flow in porous media for any meshes: application to storage of nuclear waste

International Nuclear Information System (INIS)

Angelini, O.

2010-01-01

The two-phase flow in porous media is a complex phenomenon and which relate to many industrial problems. EDF works on the feasibility and the safety of a storage in deep geologic layer of nuclear waste. In this domain the simulation of the two-phase flow in porous media is particularly important in at least three domains: first of all during the phase of ventilation of the galleries of the storage which could de-saturate the rock and so modify its properties, but also during the phase of re-saturation of the materials and finally during the arrival of the water on the metal parts contained in the storage which will then involve phenomena of corrosion and a hydrogen release. In this context, EDF wishes to obtain robust numerical methods without restrictive condition on the mesh. This work is dedicated at first to the development of the finite volume scheme SUSHI (Scheme Using Stabilization and Hybrid Interfaces) in the code of mechanics of EDF, Code Aster in order to simulate the two-phase flow in porous media. This scheme was developed in 2D and in 3D. At the same time a new formulation which allows to simulate in a uniform way the flows in saturated and unsaturated porous media for miscible and immiscible problems is proposed. Various studies simulating difficulties related to the problems of the storage of nuclear waste in deep geological layers were study. We can quote the study of a bi-material which advances the capillary re-balancing of a material by an other one possessing properties and initial very heterogeneous conditions in saturation. We will also quote the study of the injection of hydrogen in an porous media initially saturated in pure water which is proposed by the benchmark 'two-phase Flow' proposed by the GNR MOMAS. This study had for objective to bring to light the good treatment of the appearance of a phase in a saturated porous media and thus the relevance of our new formulation to study with a way unified a problem of saturated flow and a

Coupled poroelastic waves and electromagnetic fields in layered media : Theory, Modeling, and Interferometric Synthesis

NARCIS (Netherlands)

Grobbe, N.

2016-01-01

In this thesis, I study coupled poroelastic waves and electromagnetic fields in layered media. The focus is two-fold:
1. Increase the theoretical and physical understanding of the seismo-electromagnetic phenomenon by analytically-based numerical modeling.
2. Investigate the potential of

Media Literacy in Times of Media Divides

Directory of Open Access Journals (Sweden)

Kaja Žuran

2013-12-01

Full Text Available We live in a post-modern society, an information society, a society based around knowledge and participation, and above all in a media society. In a media culture where media holds a dominant position, we cannot overlook the emerging idea of a ‘media divide’ within the frame of media education, media literate individuals and the expansion of the traditional concept of media literacy. Firstly, we are in an era of technological revolution, and it is time to consider the meaning and function of media and how we experience it in our everyday life. Secondly, as a society we are subject to intense media invasion and we all need to learn how to use it to our benefit and apply a critical and autonomous perspective towards selecting media content. Otherwise the media divide between the media literate and illiterate will widen; but is there even a chance to overcome the supposed divide between those who are formally media educated and those who are not?

Factors explaining user loyalty in a social media-based brand community

Directory of Open Access Journals (Sweden)

Louis M. Potgieter

2017-02-01

Full Text Available Background: Marketers are interested in taking advantage of the capabilities of social media-based brand communities to develop long-term relationships with their customers. This research investigated the usage of a South African Facebook page to understand user attitudes and attendant pressures on users related to social norms and user loyalty. Objectives: The research investigated the extent to which perceived value, service quality and social factors influenced the customer’s intention to continue using a global motor vehicle firm’s social media-based online brand community (OBC. Method: We used an online voluntary survey to collect data from social media-based brand community members. In total, 303 responses were collected over a period of 4 weeks from a population of 3100 members. We analysed the relationship between trust, perceived responsiveness, perceived usefulness, perceived ease of use, social norms and the members’ intention to continue using the firm’s OBC. 293 usable observations were subjected to descriptive, correlation and regression analysis. Results: The age of the respondents varied from 18 to 58 years with a mean age of 32 years. Of these, 60% were men and 40% women. About 86.7% of the respondents reported having at least some form of tertiary education. The results of the multiple regression analysis indicate that service quality factors such as trust (25.5% and social influence factors such as social norms (12.5% explain a greater part of the variance in OBC continuance intention compared with utility factors such as perceived usefulness (18.2%. The effects for responsiveness and ease of use were not statistically significant. Conclusion: Social media-based brand communities are playing an important role in enhancing the overall trust relationship, value offering, sociality, knowledge and information sharing between customers and firms. Practitioners should note that the loyalty of customers using a firm�

Interaction between molecular complexes in dispersive media

International Nuclear Information System (INIS)

Banagas, E.A.; Manykin, E.A.

1987-01-01

The interaction between molecular complexes in different dispersive media with local and nonlocal screening is investigated theoretically. On the basis of results of numerical analysis on a computer, the dependence of the coupled-system spectrum and the interaction energy of the polarized modes on the characteristic parameters of the dispersive media is considered

Looking to the future of new media in health marketing: deriving propositions based on traditional theories.

Science.gov (United States)

Della, Lindsay J; Eroglu, Dogan; Bernhardt, Jay M; Edgerton, Erin; Nall, Janice

2008-01-01

Market trend data show that the media marketplace continues to rapidly evolve. Recent research shows that substantial portions of the U.S. media population are "new media" users. Today, more than ever before, media consumers are exposed to multiple media at the same point in time, encouraged to participate in media content generation, and challenged to learn, access, and use the new media that are continually entering the market. These media trends have strong implications for how consumers of health information access, process, and retain health-related knowledge. In this article we review traditional information processing models and theories of interpersonal and mass media access and consumption. We make several theory-based propositions for how traditional information processing and media consumption concepts will function as new media usage continues to increase. These propositions are supported by new media usage data from the Centers for Disease Control and Prevention's entry into the new media market (e.g., podcasting, virtual events, blogging, and webinars). Based on these propositions, we conclude by presenting both opportunities and challenges that public health communicators and marketers will face in the future.

Simulating Seismic Wave Propagation in Viscoelastic Media with an Irregular Free Surface

Science.gov (United States)

Liu, Xiaobo; Chen, Jingyi; Zhao, Zhencong; Lan, Haiqiang; Liu, Fuping

2018-05-01

In seismic numerical simulations of wave propagation, it is very important for us to consider surface topography and attenuation, which both have large effects (e.g., wave diffractions, conversion, amplitude/phase change) on seismic imaging and inversion. An irregular free surface provides significant information for interpreting the characteristics of seismic wave propagation in areas with rugged or rapidly varying topography, and viscoelastic media are a better representation of the earth's properties than acoustic/elastic media. In this study, we develop an approach for seismic wavefield simulation in 2D viscoelastic isotropic media with an irregular free surface. Based on the boundary-conforming grid method, the 2D time-domain second-order viscoelastic isotropic equations and irregular free surface boundary conditions are transferred from a Cartesian coordinate system to a curvilinear coordinate system. Finite difference operators with second-order accuracy are applied to discretize the viscoelastic wave equations and the irregular free surface in the curvilinear coordinate system. In addition, we select the convolutional perfectly matched layer boundary condition in order to effectively suppress artificial reflections from the edges of the model. The snapshot and seismogram results from numerical tests show that our algorithm successfully simulates seismic wavefields (e.g., P-wave, Rayleigh wave and converted waves) in viscoelastic isotropic media with an irregular free surface.

Pseudospectral modeling and dispersion analysis of Rayleigh waves in viscoelastic media

Science.gov (United States)

Zhang, K.; Luo, Y.; Xia, J.; Chen, C.

2011-01-01

Multichannel Analysis of Surface Waves (MASW) is one of the most widely used techniques in environmental and engineering geophysics to determine shear-wave velocities and dynamic properties, which is based on the elastic layered system theory. Wave propagation in the Earth, however, has been recognized as viscoelastic and the propagation of Rayleigh waves presents substantial differences in viscoelastic media as compared with elastic media. Therefore, it is necessary to carry out numerical simulation and dispersion analysis of Rayleigh waves in viscoelastic media to better understand Rayleigh-wave behaviors in the real world. We apply a pseudospectral method to the calculation of the spatial derivatives using a Chebyshev difference operator in the vertical direction and a Fourier difference operator in the horizontal direction based on the velocity-stress elastodynamic equations and relations of linear viscoelastic solids. This approach stretches the spatial discrete grid to have a minimum grid size near the free surface so that high accuracy and resolution are achieved at the free surface, which allows an effective incorporation of the free surface boundary conditions since the Chebyshev method is nonperiodic. We first use an elastic homogeneous half-space model to demonstrate the accuracy of the pseudospectral method comparing with the analytical solution, and verify the correctness of the numerical modeling results for a viscoelastic half-space comparing the phase velocities of Rayleigh wave between the theoretical values and the dispersive image generated by high-resolution linear Radon transform. We then simulate three types of two-layer models to analyze dispersive-energy characteristics for near-surface applications. Results demonstrate that the phase velocity of Rayleigh waves in viscoelastic media is relatively higher than in elastic media and the fundamental mode increases by 10-16% when the frequency is above 10. Hz due to the velocity dispersion of P

The social media manifesto: a comprehensive review of the impact of social media on emergency management.

Science.gov (United States)

Crowe, Adam

2011-02-01

Over the past five years, social media have impacted emergency management and disaster response in numerous ways. The emergency management professional must begin to accept this impact not as an arbitrary consequence of an uncontrolled disaster, but rather as a tool to help coordinate, manage and facilitate a safe and expected response during emergencies and disasters. This paper will explain the power and purpose of social media as well as how social media systems have equalised capabilities for all levels and sizes of government. Moreover, this paper will also highlight the social media systems that are being used as operational tools as well as what the future holds. Lastly, common implementation challenges will be discussed through a look at systematic approaches to applying social media in emergency management as a positive and valuable tool.

A multiscale MD-FE model of diffusion in composite media with internal surface interaction based on numerical homogenization procedure.

Science.gov (United States)

Kojic, M; Milosevic, M; Kojic, N; Kim, K; Ferrari, M; Ziemys, A

2014-02-01

Mass transport by diffusion within composite materials may depend not only on internal microstructural geometry, but also on the chemical interactions between the transported substance and the material of the microstructure. Retrospectively, there is a gap in methods and theory to connect material microstructure properties with macroscale continuum diffusion characteristics. Here we present a new hierarchical multiscale model for diffusion within composite materials that couples material microstructural geometry and interactions between diffusing particles and the material matrix. This model, which bridges molecular dynamics (MD) and the finite element (FE) method, is employed to construct a continuum diffusion model based on a novel numerical homogenization procedure. The procedure is general and robust for evaluating constitutive material parameters of the continuum model. These parameters include the traditional bulk diffusion coefficients and, additionally, the distances from the solid surface accounting for surface interaction effects. We implemented our models to glucose diffusion through the following two geometrical/material configurations: tightly packed silica nanospheres, and a complex fibrous structure surrounding nanospheres. Then, rhodamine 6G diffusion analysis through an aga-rose gel network was performed, followed by a model validation using our experimental results. The microstructural model, numerical homogenization and continuum model offer a new platform for modeling and predicting mass diffusion through complex biological environment and within composite materials that are used in a wide range of applications, like drug delivery and nanoporous catalysts.

Explaining the use of text-based communication media: an examination of three theories of media use.

Science.gov (United States)

Park, Namkee; Chung, Jae Eun; Lee, Seungyoon

2012-07-01

The present study examined the factors associated with individuals' use of three different text-based communication media: e-mail, cell-phone texting, and Facebook Wall postings. Three theoretical perspectives, including media richness theory, uses and gratifications, and perceived network effects, were examined. Using data from a survey of college students (N=280), the study found that the theoretical constructs from these theories play different roles when applied to different technologies. The results suggest that a simultaneous consideration of technological attributes, users' motivations, and social circumstances in which users select and use the technology is useful for fully understanding the dynamics of the selection and the use of a given technology.

Parallel numerical modeling of hybrid-dimensional compositional non-isothermal Darcy flows in fractured porous media

Science.gov (United States)

Xing, F.; Masson, R.; Lopez, S.

2017-09-01

This paper introduces a new discrete fracture model accounting for non-isothermal compositional multiphase Darcy flows and complex networks of fractures with intersecting, immersed and non-immersed fractures. The so called hybrid-dimensional model using a 2D model in the fractures coupled with a 3D model in the matrix is first derived rigorously starting from the equi-dimensional matrix fracture model. Then, it is discretized using a fully implicit time integration combined with the Vertex Approximate Gradient (VAG) finite volume scheme which is adapted to polyhedral meshes and anisotropic heterogeneous media. The fully coupled systems are assembled and solved in parallel using the Single Program Multiple Data (SPMD) paradigm with one layer of ghost cells. This strategy allows for a local assembly of the discrete systems. An efficient preconditioner is implemented to solve the linear systems at each time step and each Newton type iteration of the simulation. The numerical efficiency of our approach is assessed on different meshes, fracture networks, and physical settings in terms of parallel scalability, nonlinear convergence and linear convergence.

Decoupled equations for reverse time migration in tilted transversely isotropic media

KAUST Repository

Zhan, Ge; Pestana, Reynam C.; Stoffa, Paul L.

2012-01-01

Conventional modeling and migration for tilted transversely isotropic (TTI) media may suffer from numerical instabilities and shear wave artifacts due to the coupling of the P-wave and SV-wave modes in the TTI coupled equations. Starting with the separated P- and SV-phase velocity expressions for vertical transversely isotropic (VTI) media, we extend these decoupled equations for modeling and reverse time migration (RTM) in acoustic TTI media. Compared with the TTI coupled equations published in the geophysical literature, the new TTI decoupled equations provide a more stable solution due to the complete separation of the P-wave and SV-wave modes. The pseudospectral method is the most convenient method to implement these equations due to the form of wavenumber expressions and has the added benefit of being highly accurate and thus avoiding numerical dispersion. The rapid expansion method (REM) in time is employed to produce a broad band numerically stable time evolution of the wavefields. Synthetic results validate the proposed TTI decoupled equations and show that modeling and RTM in TTI media with the decoupled equations remain numerically stable even for models with strong anisotropy and sharp contrasts. © 2012 Society of Exploration Geophysicists.

Decoupled equations for reverse time migration in tilted transversely isotropic media

KAUST Repository

Zhan, Ge

2012-03-01

Conventional modeling and migration for tilted transversely isotropic (TTI) media may suffer from numerical instabilities and shear wave artifacts due to the coupling of the P-wave and SV-wave modes in the TTI coupled equations. Starting with the separated P- and SV-phase velocity expressions for vertical transversely isotropic (VTI) media, we extend these decoupled equations for modeling and reverse time migration (RTM) in acoustic TTI media. Compared with the TTI coupled equations published in the geophysical literature, the new TTI decoupled equations provide a more stable solution due to the complete separation of the P-wave and SV-wave modes. The pseudospectral method is the most convenient method to implement these equations due to the form of wavenumber expressions and has the added benefit of being highly accurate and thus avoiding numerical dispersion. The rapid expansion method (REM) in time is employed to produce a broad band numerically stable time evolution of the wavefields. Synthetic results validate the proposed TTI decoupled equations and show that modeling and RTM in TTI media with the decoupled equations remain numerically stable even for models with strong anisotropy and sharp contrasts. © 2012 Society of Exploration Geophysicists.

Physics-based hybrid method for multiscale transport in porous media

Science.gov (United States)

Yousefzadeh, Mehrdad; Battiato, Ilenia

2017-09-01

Despite advancements in the development of multiscale models for flow and reactive transport in porous media, the accurate, efficient and physics-based coupling of multiple scales in hybrid models remains a major theoretical and computational challenge. Improving the predictivity of macroscale predictions by means of multiscale algorithms relative to classical at-scale models is the primary motivation for the development of multiscale simulators. Yet, very few are the quantitative studies that explicitly address the predictive capability of multiscale coupling algorithms as it is still generally not possible to have a priori estimates of the errors that are present when complex flow processes are modeled. We develop a nonintrusive pore-/continuum-scale hybrid model whose coupling error is bounded by the upscaling error, i.e. we build a predictive tightly coupled multiscale scheme. This is accomplished by slightly enlarging the subdomain where continuum-scale equations are locally invalid and analytically defining physics-based coupling conditions at the interfaces separating the two computational sub-domains, while enforcing state variable and flux continuity. The proposed multiscale coupling approach retains the advantages of domain decomposition approaches, including the use of existing solvers for each subdomain, while it gains flexibility in the choice of the numerical discretization method and maintains the coupling errors bounded by the upscaling error. We implement the coupling in finite volumes and test the proposed method by modeling flow and transport through a reactive channel and past an array of heterogeneously reactive cylinders.

Economic Learning Media Development Based on Local Locality

Science.gov (United States)

Hadi, Rizali; Supriyanto; Hasanah, Mahmudah

2017-01-01

This study aims to describe the learning medium of economic education at senior High School in Banjarmasin with media based on local wisdom. This research uses qualitative method as developed by Miles & Huberman, starting from data collection, data reduction data display, and then made conclusion. Data were collected in the order of Basic…

PROXY-BASED PATCHING STREAM TRANSMISSION STRATEGY IN MOBILE STREAMING MEDIA SYSTEM

Institute of Scientific and Technical Information of China (English)

Liao Jianxin; Lei Zhengxiong; Ma Xutao; Zhu Xiaomin

2006-01-01

A mobile transmission strategy, PMPatching (Proxy-based Mobile Patching) transmission strategy is proposed, it applies to the proxy-based mobile streaming media system in Wideband Code Division Multiple Access (WCDMA) network. Performance of the whole system can be improved by using patching stream to transmit anterior part of the suffix that had been played back, and by batching all the demands for the suffix arrived in prefix period and patching stream transmission threshold period. Experimental results show that this strategy can efficiently reduce average network transmission cost and number of channels consumed in central streaming media server.

Numerical modeling of macrodispersion in heterogeneous media: a comparison of multi-Gaussian and non-multi-Gaussian models

Science.gov (United States)

Wen, Xian-Huan; Gómez-Hernández, J. Jaime

1998-03-01

The macrodispersion of an inert solute in a 2-D heterogeneous porous media is estimated numerically in a series of fields of varying heterogeneity. Four different random function (RF) models are used to model log-transmissivity (ln T) spatial variability, and for each of these models, ln T variance is varied from 0.1 to 2.0. The four RF models share the same univariate Gaussian histogram and the same isotropic covariance, but differ from one another in terms of the spatial connectivity patterns at extreme transmissivity values. More specifically, model A is a multivariate Gaussian model for which, by definition, extreme values (both high and low) are spatially uncorrelated. The other three models are non-multi-Gaussian: model B with high connectivity of high extreme values, model C with high connectivity of low extreme values, and model D with high connectivities of both high and low extreme values. Residence time distributions (RTDs) and macrodispersivities (longitudinal and transverse) are computed on ln T fields corresponding to the different RF models, for two different flow directions and at several scales. They are compared with each other, as well as with predicted values based on first-order analytical results. Numerically derived RTDs and macrodispersivities for the multi-Gaussian model are in good agreement with analytically derived values using first-order theories for log-transmissivity variance up to 2.0. The results from the non-multi-Gaussian models differ from each other and deviate largely from the multi-Gaussian results even when ln T variance is small. RTDs in non-multi-Gaussian realizations with high connectivity at high extreme values display earlier breakthrough than in multi-Gaussian realizations, whereas later breakthrough and longer tails are observed for RTDs from non-multi-Gaussian realizations with high connectivity at low extreme values. Longitudinal macrodispersivities in the non-multi-Gaussian realizations are, in general, larger than

Numerical simulation and comparison of nonlinear self-focusing based on iteration and ray tracing

Science.gov (United States)

Li, Xiaotong; Chen, Hao; Wang, Weiwei; Ruan, Wangchao; Zhang, Luwei; Cen, Zhaofeng

2017-05-01

Self-focusing is observed in nonlinear materials owing to the interaction between laser and matter when laser beam propagates. Some of numerical simulation strategies such as the beam propagation method (BPM) based on nonlinear Schrödinger equation and ray tracing method based on Fermat's principle have applied to simulate the self-focusing process. In this paper we present an iteration nonlinear ray tracing method in that the nonlinear material is also cut into massive slices just like the existing approaches, but instead of paraxial approximation and split-step Fourier transform, a large quantity of sampled real rays are traced step by step through the system with changing refractive index and laser intensity by iteration. In this process a smooth treatment is employed to generate a laser density distribution at each slice to decrease the error caused by the under-sampling. The characteristics of this method is that the nonlinear refractive indices of the points on current slice are calculated by iteration so as to solve the problem of unknown parameters in the material caused by the causal relationship between laser intensity and nonlinear refractive index. Compared with the beam propagation method, this algorithm is more suitable for engineering application with lower time complexity, and has the calculation capacity for numerical simulation of self-focusing process in the systems including both of linear and nonlinear optical media. If the sampled rays are traced with their complex amplitudes and light paths or phases, it will be possible to simulate the superposition effects of different beam. At the end of the paper, the advantages and disadvantages of this algorithm are discussed.

Complex transfers in porous media: some physical and numerical approaches

International Nuclear Information System (INIS)

Maugis, P.

2006-06-01

The feasibility and safety of nuclear waste storage containers is studied. The thermodynamics of water/air flow is described and applied, via a simplified numerical model, to a simple experimental apparatus yielding heat pipe effect. The 2D influence of deterministic boundary conditions is important on kinematics and transport. Dispersivity depends on the nonuniform flow type and integrates the often marginal Gaussian part of plume spreading. A new algorithm, based on jump locality and recalibration, avoids the small bias induced by inter-cell diffusive jumps. Several algorithms modeling transport of decaying, soluble, sorbing, or precipitating species are compared. Stability and precision criteria are analyzed. Up-stream over-precipitation and negative down-stream concentrations are observed for high solubility contrasts. (author)

Numerical model CCC

International Nuclear Information System (INIS)

Bodvarsson, G.S.; Lippmann, M.J.

1980-01-01

The computer program CCC (conduction-convection-consolidation), developed at Lawrence Berkeley Laboratory, solves numerically the heat and mass flow equations for a fully saturated medium, and computes one-dimensional consolidation of the simulated systems. The model employs the Integrated Finite Difference Method (IFDM) in discretizing the saturated medium and formulating the governing equations. The sets of equations are solved either by an iterative solution technique (old version) or an efficient sparse solver (new version). The deformation of the medium is calculated using the one-dimensional consolidation theory of Terzaghi. In this paper, the numerical code is described, validation examples given and areas of application discussed. Several example problems involving flow through fractured media are also presented

Web-based Media at European Universities: Systems, Usage, and Motivation

DEFF Research Database (Denmark)

Godsk, Mikkel

2009-01-01

This paper presents the results of two surveys analyzing the usage of and the systems available for web-based media at European universities, and how the teachers can be motivated to increase their usage of such materials in their teaching practice. The surveys were carried out April-May 2009 among...... obvious. The surveys also show that many teachers are already using web-based media in their teaching practice and by addressing some of their teaching circumstances it would be possible to increase the usage even further. Based on these results the paper presents five initiatives to motivate the teachers...

Modeling heterogeneous unsaturated porous media flow at Yucca Mountain

International Nuclear Information System (INIS)

Robey, T.H.

1994-01-01

Geologic systems are inherently heterogeneous and this heterogeneity can have a significant impact on unsaturated flow through porous media. Most previous efforts to model groundwater flow through Yucca Mountain have used stratigraphic units with homogeneous properties. However, modeling heterogeneous porous and fractured tuff in a more realistic manner requires numerical methods for generating heterogeneous simulations of the media, scaling of material properties from core scale to computational scale, and flow modeling that allows channeling. The Yucca Mountain test case of the INTRAVAL project is used to test the numerical approaches. Geostatistics is used to generate more realistic representations of the stratigraphic units and heterogeneity within units is generated using sampling from property distributions. Scaling problems are reduced using an adaptive grid that minimizes heterogeneity within each flow element. A flow code based on the dual mixed-finite-element method that allows for heterogeneity and channeling is employed. In the Yucca Mountain test case, the simulated volumetric water contents matched the measured values at drill hole USW UZ-16 except in the nonwelded portion of Prow Pass

The role of social media in schizophrenia: evaluating risks, benefits, and potential.

Science.gov (United States)

Torous, John; Keshavan, Matcheri

2016-05-01

Patients with schizophrenia suffer from numerous social problems often because of negative symptoms of the illness and impairments in social cognition. Social media and social networks now offer a novel tool to engage and help patients navigate and potentially improve social functioning. In this review, we aim to explore how impaired neural networks in schizophrenia impair social functioning, examine the evidence base for social networks and social media to help in the role, consider the evidence for current risks and benefits of use, and discuss the future of social media and social networks for schizophrenia. Patients with schizophrenia are increasingly connected to and engaged with social media. There is strong evidence that they own, use, and accept digital tools like smartphones and already use social media services like Facebook at high rates, especially among those who are younger. Less is known about the clinical risks and benefits of social media use in schizophrenia, although there are increasingly more social networking platforms being designed specifically for those with mental illness. Social media tools have the potential to offer a plethora of new services to patients with schizophrenia, although the clinical evidence base for such is still nascent. It is important to ensure that both clinicians and patients are aware of and educated about the risks of using social media. Going forward, it is likely that social media will have an expanding role in care, with social media offering new pathways to address negative symptoms and impairments in social cognition in schizophrenia.

Bivariational calculations for radiation transfer in an inhomogeneous participating media

International Nuclear Information System (INIS)

El Wakil, S.A.; Machali, H.M.; Haggag, M.H.; Attia, M.T.

1986-07-01

Equations for radiation transfer are obtained for dispersive media with space dependent albedo. Bivariational bound principle is used to calculate the reflection and transmission coefficients for such media. Numerical results are given and compared. (author)

Numerical modeling of Gaussian beam propagation and diffraction in inhomogeneous media based on the complex eikonal equation

Science.gov (United States)

Huang, Xingguo; Sun, Hui

2018-05-01

Gaussian beam is an important complex geometrical optical technology for modeling seismic wave propagation and diffraction in the subsurface with complex geological structure. Current methods for Gaussian beam modeling rely on the dynamic ray tracing and the evanescent wave tracking. However, the dynamic ray tracing method is based on the paraxial ray approximation and the evanescent wave tracking method cannot describe strongly evanescent fields. This leads to inaccuracy of the computed wave fields in the region with a strong inhomogeneous medium. To address this problem, we compute Gaussian beam wave fields using the complex phase by directly solving the complex eikonal equation. In this method, the fast marching method, which is widely used for phase calculation, is combined with Gauss-Newton optimization algorithm to obtain the complex phase at the regular grid points. The main theoretical challenge in combination of this method with Gaussian beam modeling is to address the irregular boundary near the curved central ray. To cope with this challenge, we present the non-uniform finite difference operator and a modified fast marching method. The numerical results confirm the proposed approach.

Synthesis CNTs Particle Based Abrasive Media for Abrasive Flow Machining Process

International Nuclear Information System (INIS)

Kumar, Sonu; Walia, R.S; Dhull, S.; Murtaza, Q.; Tyagi, P. K.

2016-01-01

Abrasive flow machining (AFM) is a modem fine finishing process used for intricate and internal finishing of components or parts. It is based on flowing of viscoelastic abrasive media over the surface to be fine finished. The abrasive media is the important parameter in the AFM process because of its ability to accurately abrade the predefined area along it flow path. In this study, an attempt is made to develop a new abrasive, alumina with Carbon nanotubes (CNTs) in viscoelastic medium. CNT s in house produced through chemical vapour deposition technique and characterize through TEM. Performance evaluation of the new abrasive media is carried out by increasing content of CNT s with fixed extrusion pressure, viscosity of media and media flow rate as process parameters and surface finish improvement and material removal as process responses in AFM setup. Significantly improvement has been observed in material removal and maximum improvement of 100% has been observed in the surface finish on the inner cylindrical surface of the cast iron work piece. (paper)

Palladium-based nanocatalysts for alcohol electrooxidation in alkaline media

CSIR Research Space (South Africa)

Modibedi, RM

2013-01-01

Full Text Available in the electrocatalytic oxidation of alcohols in alkaline media compared to platinum catalysts. Recent efforts have focused on the discovery of palladium-based electrocatalysts with little or no platinum for oxygen reduction reaction (ORR). This chapter is an overview...

Numerical modeling of two-phase binary fluid mixing using mixed finite elements

KAUST Repository

Sun, Shuyu

2012-07-27

Diffusion coefficients of dense gases in liquids can be measured by considering two-phase binary nonequilibrium fluid mixing in a closed cell with a fixed volume. This process is based on convection and diffusion in each phase. Numerical simulation of the mixing often requires accurate algorithms. In this paper, we design two efficient numerical methods for simulating the mixing of two-phase binary fluids in one-dimensional, highly permeable media. Mathematical model for isothermal compositional two-phase flow in porous media is established based on Darcy\\'s law, material balance, local thermodynamic equilibrium for the phases, and diffusion across the phases. The time-lag and operator-splitting techniques are used to decompose each convection-diffusion equation into two steps: diffusion step and convection step. The Mixed finite element (MFE) method is used for diffusion equation because it can achieve a high-order and stable approximation of both the scalar variable and the diffusive fluxes across grid-cell interfaces. We employ the characteristic finite element method with moving mesh to track the liquid-gas interface. Based on the above schemes, we propose two methods: single-domain and two-domain methods. The main difference between two methods is that the two-domain method utilizes the assumption of sharp interface between two fluid phases, while the single-domain method allows fractional saturation level. Two-domain method treats the gas domain and the liquid domain separately. Because liquid-gas interface moves with time, the two-domain method needs work with a moving mesh. On the other hand, the single-domain method allows the use of a fixed mesh. We derive the formulas to compute the diffusive flux for MFE in both methods. The single-domain method is extended to multiple dimensions. Numerical results indicate that both methods can accurately describe the evolution of the pressure and liquid level. © 2012 Springer Science+Business Media B.V.

From continuum analytical description to discrete numerical modelling of localized fluidization in granular media

Directory of Open Access Journals (Sweden)

Puig i Montellà Eduard

2017-01-01

Full Text Available We present analytical and numerical results on localized fluidization within a granular layer subjected to a local injection of fluid. As the injection rate increases the three different regimes previously reported in the literature are recovered: homogeneous expansion of the bed, fluidized cavity in which fluidization starts developing above the injection area, and finally the chimney of fluidized grains when the fluidization zone reaches the free surface. The analytical approach is at the continuum scale, based on Darcy’s law and Therzaghi’s effective stress principle. It provides a good description of the phenomenon as long as the porosity of the granular assembly remains relatively homogeneous. The numerical approach is at the particle scale based on the coupled DEM-PFV method. It tackles the more heterogeneous situations which occur at larger injection rates. A direct link is evidenced between the occurrence of the different regimes of fluidization and the injection aperture. Finally, the merging of chimneys in case of two injection points is investigated.

The Takeoff of Social Media in Tourism

DEFF Research Database (Denmark)

Hvass, Kristian Anders; Munar, Ana Maria

2012-01-01

Over the years, online marketing has grown in importance in the tourism industry. This media space offers companies throughout the tourism value system numerous marketing tools, one of the most recent being social media. Social media allows companies to interact directly with customers via various...... Internet platforms and monitor and interact with customer opinions and evaluations of services. This exploratory article studies the travel portion of the tourism experience through airlines’ use of social media on two social media platforms for a 6-month time period. The social media content posted...... by airlines is analyzed and categorized according to the promotional marketing mix. In addition, the authors propose four categories to describe the overall communicative behavior. Among the results, it is shown that there is a lack of strategic perspective among airlines’ utilization of social media...

Modeling of Multicomponent Diffusions and Natural Convection in Unfractured and Fractured Media by Discontinuous Galerkin and Mixed Methods

KAUST Repository

Hoteit, Hussein; Firoozabadi, Abbas

2017-01-01

Computation of the distribution of species in hydrocarbon reservoirs from diffusions (thermal, molecular, and pressure) and natural convection is an important step in reservoir initialization. Current methods, which are mainly based on the conventional finite difference approach, may not be numerically efficient in fractured and other media with complex heterogeneities. In this work, the discontinuous Galerkin (DG) method combined with the mixed finite element (MFE) method is used for the calculation of compositional variation in fractured hydrocarbon reservoirs. The use of unstructured gridding allows efficient computations for fractured media when the crossflow equilibrium concept is invoked. The DG method has less numerical dispersion than the upwind finite difference (FD) methods. The MFE method ensures continuity of fluxes at the interface of the grid elements. We also use the local discontinuous Galerkin (LDG) method instead of the MFE calculate the diffusion fluxes. Results from several numerical examples are presented to demonstrate the efficiency, robustness, and accuracy of the model. Various features of convection and diffusion in homogeneous, layered, and fractured media are also discussed.

Modeling of Multicomponent Diffusions and Natural Convection in Unfractured and Fractured Media by Discontinuous Galerkin and Mixed Methods

KAUST Repository

Hoteit, Hussein

2017-12-29

Computation of the distribution of species in hydrocarbon reservoirs from diffusions (thermal, molecular, and pressure) and natural convection is an important step in reservoir initialization. Current methods, which are mainly based on the conventional finite difference approach, may not be numerically efficient in fractured and other media with complex heterogeneities. In this work, the discontinuous Galerkin (DG) method combined with the mixed finite element (MFE) method is used for the calculation of compositional variation in fractured hydrocarbon reservoirs. The use of unstructured gridding allows efficient computations for fractured media when the crossflow equilibrium concept is invoked. The DG method has less numerical dispersion than the upwind finite difference (FD) methods. The MFE method ensures continuity of fluxes at the interface of the grid elements. We also use the local discontinuous Galerkin (LDG) method instead of the MFE calculate the diffusion fluxes. Results from several numerical examples are presented to demonstrate the efficiency, robustness, and accuracy of the model. Various features of convection and diffusion in homogeneous, layered, and fractured media are also discussed.

Numerical research of two-phase flow in fractured-porous media based on discrete fracture fetwork model

Science.gov (United States)

Pyatkov, A. A.; Kosyakov, V. P.; Rodionov, S. P.; Botalov, A. Y.

2018-03-01

In this work was the study of the processes of isothermal and non-isothermal flow of high viscosity oil in a fractured-porous reservoir. The numerical experiment was done using our own reservoir simulator with the possibility of modeling of fluid motion in conditions of non-isothermal processes and long fractures in the formation.

LP II--A GOAL PROGRAMMING MODEL FOR MEDIA.

Science.gov (United States)

CHARNES, A.; AND OTHERS

A GOAL PROGRAMING MODEL FOR SELECTING MEDIA IS PRESENTED WHICH ALTERS THE OBJECTIVE AND EXTENDS PREVIOUS MEDIA MODELS BY ACCOUNTING FOR CUMULATIVE DUPLICATING AUDIENCES OVER A VARIETY OF TIME PERIODS. THIS PERMITS DETAILED CONTROL OF THE DISTRIBUTION OF MESSAGE FREQUENCIES DIRECTED AT EACH OF NUMEROUS MARKETING TARGETS OVER A SEQUENCE OF…

Social Media Misuse in the United States Army

Science.gov (United States)

2016-06-10

phenomenon for the Army and it will increase as more Soldiers in the millennial generation communicate through social media as well as use numerous...social media . Soldiers and leaders must also understand the punitive actions that could result from not upholding the Army values and ethics resulting...browsing a social media network’s community page in 2014 when she came upon a video that she found offensive and sexist. In one scene of the video

High-order FDTD methods for transverse electromagnetic systems in dispersive inhomogeneous media.

Science.gov (United States)

Zhao, Shan

2011-08-15

This Letter introduces a novel finite-difference time-domain (FDTD) formulation for solving transverse electromagnetic systems in dispersive media. Based on the auxiliary differential equation approach, the Debye dispersion model is coupled with Maxwell's equations to derive a supplementary ordinary differential equation for describing the regularity changes in electromagnetic fields at the dispersive interface. The resulting time-dependent jump conditions are rigorously enforced in the FDTD discretization by means of the matched interface and boundary scheme. High-order convergences are numerically achieved for the first time in the literature in the FDTD simulations of dispersive inhomogeneous media. © 2011 Optical Society of America

Transmutation of planar media singularities in a conformal cloak.

Science.gov (United States)

Liu, Yichao; Mukhtar, Musawwadah; Ma, Yungui; Ong, C K

2013-11-01

Invisibility cloaking based on optical transformation involves materials singularity at the branch cut points. Many interesting optical devices, such as the Eaton lens, also require planar media index singularities in their implementation. We show a method to transmute two singularities simultaneously into harmless topological defects formed by anisotropic permittivity and permeability tensors. Numerical simulation is performed to verify the functionality of the transmuted conformal cloak consisting of two kissing Maxwell fish eyes.

A multiscale MD–FE model of diffusion in composite media with internal surface interaction based on numerical homogenization procedure

Science.gov (United States)

Kojic, M.; Milosevic, M.; Kojic, N.; Kim, K.; Ferrari, M.; Ziemys, A.

2014-01-01

Mass transport by diffusion within composite materials may depend not only on internal microstructural geometry, but also on the chemical interactions between the transported substance and the material of the microstructure. Retrospectively, there is a gap in methods and theory to connect material microstructure properties with macroscale continuum diffusion characteristics. Here we present a new hierarchical multiscale model for diffusion within composite materials that couples material microstructural geometry and interactions between diffusing particles and the material matrix. This model, which bridges molecular dynamics (MD) and the finite element (FE) method, is employed to construct a continuum diffusion model based on a novel numerical homogenization procedure. The procedure is general and robust for evaluating constitutive material parameters of the continuum model. These parameters include the traditional bulk diffusion coefficients and, additionally, the distances from the solid surface accounting for surface interaction effects. We implemented our models to glucose diffusion through the following two geometrical/material configurations: tightly packed silica nanospheres, and a complex fibrous structure surrounding nanospheres. Then, rhodamine 6G diffusion analysis through an aga-rose gel network was performed, followed by a model validation using our experimental results. The microstructural model, numerical homogenization and continuum model offer a new platform for modeling and predicting mass diffusion through complex biological environment and within composite materials that are used in a wide range of applications, like drug delivery and nanoporous catalysts. PMID:24578582

Numerical and experimental approaches to study soil transport and clogging in granular filters

Science.gov (United States)

Kanarska, Y.; Smith, J. J.; Ezzedine, S. M.; Lomov, I.; Glascoe, L. G.

2012-12-01

Failure of a dam by erosion ranks among the most serious accidents in civil engineering. The best way to prevent internal erosion is using adequate granular filters in the transition areas where important hydraulic gradients can appear. In case of cracking and erosion, if the filter is capable of retaining the eroded particles, the crack will seal and the dam safety will be ensured. Numerical modeling has proved to be a cost-effective tool for improving our understanding of physical processes. Traditionally, the consideration of flow and particle transport in porous media has focused on treating the media as continuum. Practical models typically address flow and transport based on the Darcy's law as a function of a pressure gradient and a medium-dependent permeability parameter. Additional macroscopic constitutes describe porosity, and permeability changes during the migration of a suspension through porous media. However, most of them rely on empirical correlations, which often need to be recalibrated for each application. Grain-scale modeling can be used to gain insight into scale dependence of continuum macroscale parameters. A finite element numerical solution of the Navier-Stokes equations for fluid flow together with Lagrange multiplier technique for solid particles was applied to the simulation of soil filtration in the filter layers of gravity dam. The numerical approach was validated through comparison of numerical simulations with the experimental results of base soil particle clogging in the filter layers performed at ERDC. The numerical simulation correctly predicted flow and pressure decay due to particle clogging. The base soil particle distribution was almost identical to those measured in the laboratory experiment. It is believed that the agreement between simulations and experimental data demonstrates the applicability of the proposed approach for prediction of the soil transport and clogging in embankment dams. To get more precise understanding of

Numerical study of criticality of the slab reactors with three regions in one-group transport theory

International Nuclear Information System (INIS)

Santos, A. dos.

1979-01-01

The criticality of slab reactors consisting of core, blanket, and reflector is studied numerically based on the singular-eigenfunction-expansion method in one-group transport theory. The purpose of this work is three-fold: (1) it is shown that the three-media problem can be converted, using a recently developed method, to a set of regular integral equations for the expansion coefficients, such that numerical solutions can be obtained for the first time based on an exact theory; (2) highly accurate numerical results that can serve as standards of comparison for various approximate methods are reported for representative sets of parameters; and (3) the accuracy of the P sub(N) approximation, one of the more often used methods, is analyzed compared to the exact results [pt

Adaptive moving grid methods for two-phase flow in porous media

KAUST Repository

Dong, Hao

2014-08-01

In this paper, we present an application of the moving mesh method for approximating numerical solutions of the two-phase flow model in porous media. The numerical schemes combine a mixed finite element method and a finite volume method, which can handle the nonlinearities of the governing equations in an efficient way. The adaptive moving grid method is then used to distribute more grid points near the sharp interfaces, which enables us to obtain accurate numerical solutions with fewer computational resources. The numerical experiments indicate that the proposed moving mesh strategy could be an effective way to approximate two-phase flows in porous media. © 2013 Elsevier B.V. All rights reserved.

Empowering file-based radio production through media asset management systems

Science.gov (United States)

Muylaert, Bjorn; Beckers, Tom

2006-10-01

In recent years, IT-based production and archiving of media has matured to a level which enables broadcasters to switch over from tape- or CD-based to file-based workflows for the production of their radio and television programs. This technology is essential for the future of broadcasters as it provides the flexibility and speed of execution the customer demands by enabling, among others, concurrent access and production, faster than real-time ingest, edit during ingest, centrally managed annotation and quality preservation of media. In terms of automation of program production, the radio department is the most advanced within the VRT, the Flemish broadcaster. Since a couple of years ago, the radio department has been working with digital equipment and producing its programs mainly on standard IT equipment. Historically, the shift from analogue to digital based production has been a step by step process initiated and coordinated by each radio station separately, resulting in a multitude of tools and metadata collections, some of them developed in-house, lacking integration. To make matters worse, each of those stations adopted a slightly different production methodology. The planned introduction of a company-wide Media Asset Management System allows a coordinated overhaul to a unified production architecture. Benefits include the centralized ingest and annotation of audio material and the uniform, integrated (in terms of IT infrastructure) workflow model. Needless to say, the ingest strategy, metadata management and integration with radio production systems play a major role in the level of success of any improvement effort. This paper presents a data model for audio-specific concepts relevant to radio production. It includes an investigation of ingest techniques and strategies. Cooperation with external, professional production tools is demonstrated through a use-case scenario: the integration of an existing, multi-track editing tool with a commercially available

The coulometric titration of acids and bases in dimethylsulfoxide media

NARCIS (Netherlands)

Bos, M.; IJpma, S.T.; Dahmen, E.A.M.F.

1976-01-01

The coulometric titration of 20–200 μeq of acids and bases in DMSO media is described. In the titration of bases, the electro-oxidation of hydrogen at a platinized platinum electrode is used as the source of protons. The conditions for 100 % current efficiency at this electrode are low current

A Preliminary Evaluation of a School-Based Media Education and Reduction Intervention.

Science.gov (United States)

Bickham, David S; Hswen, Yulin; Slaby, Ronald G; Rich, Michael

2018-06-01

While media education and reduction programs have been proposed to prevent adverse health and academic outcomes related to heavy electronic media use among school-aged children, few have been formally piloted and evaluated. We used a quasi-experimental design to evaluate the effectiveness of Take the Challenge (TtC), a school-based media education/reduction program for the primary prevention of sleep deprivation, dysfunctional social-emotional behaviors, and poor academic performance. Sixth- to eighth-grade students at a rural Midwestern U.S. middle school received the TtC program, while a similar school in the same district served as the comparison group. Health-related and academic measures were collected from students and teachers at both schools before and after the intervention. The primary outcome measure was student-reported electronic media use (television, video games, Internet). Secondary measures included student health behaviors (student-reported sleep, exercise, and outdoor play) and academic activities (teacher-reported homework and classroom performance). Compared to the comparison group, students receiving TtC slept more and reduced television viewing, background television time, after-school video gaming, and weekend Internet use. Teachers reported increases in the extent to which TtC students completed homework assignments and stayed on task in the classroom. Well-designed school-based programs such as TtC can reduce electronic media use among middle-school children and improve related health and academic outcomes.

Numerical simulation of mechanisms of deformation,failure and energy dissipation in porous rock media subjected to wave stresses

Institute of Scientific and Technical Information of China (English)

无

2010-01-01

The pore characteristics,mineral compositions,physical and mechanical properties of the subarkose sandstones were acquired by means of CT scan,X-ray diffraction and physical tests.A few physical models possessing the same pore characteristics and matrix properties but different porosities compared to the natural sandstones were developed.The 3D finite element models of the rock media with varied porosities were established based on the CT image processing of the physical models and the MIMICS software platform.The failure processes of the porous rock media loaded by the split Hopkinson pressure bar(SHPB) were simulated by satisfying the elastic wave propagation theory.The dynamic responses,stress transition,deformation and failure mechanisms of the porous rock media subjected to the wave stresses were analyzed.It is shown that an explicit and quantitative analysis of the stress,strain and deformation and failure mechanisms of porous rocks under the wave stresses can be achieved by using the developed 3D finite element models.With applied wave stresses of certain amplitude and velocity,no evident pore deformation was observed for the rock media with a porosity less than 15%.The deformation is dominantly the combination of microplasticity(shear strain),cracking(tensile strain) of matrix and coalescence of the cracked regions around pores.Shear stresses lead to microplasticity,while tensile stresses result in cracking of the matrix.Cracking and coalescence of the matrix elements in the neighborhood of pores resulted from the high transverse tensile stress or tensile strain which exceeded the threshold values.The simulation results of stress wave propagation,deformation and failure mechanisms and energy dissipation in porous rock media were in good agreement with the physical tests.The present study provides a reference for analyzing the intrinsic mechanisms of the complex dynamic response,stress transit mode,deformation and failure mechanisms and the disaster

The Use of Geometry Learning Media Based on Augmented Reality for Junior High School Students

Science.gov (United States)

Rohendi, D.; Septian, S.; Sutarno, H.

2018-02-01

Understanding the geometry especially of three-dimensional space is still considered difficult by some students. Therefore, a learning innovation is required to overcome students’ difficulties in learning geometry. In this research, we developed geometry learning media based on augmented reality in android flatform’s then it was implemented in teaching three-dimensional objects for some junior high school students to find out: how is the students response in using this new media in geometry and is this media can solve the student’s difficulties in understanding geometry concept. The results showed that the use of geometry learning media based on augmented reality in android flatform is able to get positive responses from the students in learning geometry concepts especially three-dimensional objects and students more easy to understand concept of diagonal in geometry than before using this media.

The thermal non-equilibrium porous media modelling for CFD study of woven wire matrix of a Stirling regenerator

International Nuclear Information System (INIS)

Costa, S.C.; Barreno, I.; Tutar, M.; Esnaola, J.A.; Barrutia, H.

2015-01-01

Highlights: • A numerical procedure to derive porous media’s coefficients is proposed. • The local thermal non-equilibrium porous media model is more suitable for regenerators. • The regenerator temperature profiles can be better fitted to a logarithmic curve. • The wound woven wire matrix provides lower performance compared to stacked. • The numerical characterization methodology is useful for the multi-D Stirling engine models. - Abstract: Different numerical methods can be applied to the analysis of the flow through the Stirling engine regenerator. One growing approach is to model the regenerator as porous medium to simulate and design the full Stirling engine in three-dimensional (3-D) manner. In general, the friction resistance coefficients and heat transfer coefficient are experimentally obtained to describe the flow and thermal non-equilibrium through a porous medium. A finite volume method (FVM) based non-thermal equilibrium porous media modelling approach characterizing the fluid flow and heat transfer in a representative small detailed flow domain of the woven wire matrix is proposed here to obtain the porous media coefficients without further requirement of experimental studies. The results are considered to be equivalent to those obtained from the detailed woven wire matrix for the pressure drop and heat transfer. Once the equivalence between the models is verified, this approach is extended to model oscillating regeneration cycles through a full size regenerator porous media for two different woven wire matrix configurations of stacked and wound types. The results suggest that the numerical modelling approach proposed here can be applied with confidence to model the regenerator as a porous media in the multi-dimensional (multi-D) simulations of Stirling engines

An efficient wave extrapolation method for anisotropic media with tilt

KAUST Repository

Waheed, Umair bin

2015-03-23

Wavefield extrapolation operators for elliptically anisotropic media offer significant cost reduction compared with that for the transversely isotropic case, particularly when the axis of symmetry exhibits tilt (from the vertical). However, elliptical anisotropy does not provide accurate wavefield representation or imaging for transversely isotropic media. Therefore, we propose effective elliptically anisotropic models that correctly capture the kinematic behaviour of wavefields for transversely isotropic media. Specifically, we compute source-dependent effective velocities for the elliptic medium using kinematic high-frequency representation of the transversely isotropic wavefield. The effective model allows us to use cheaper elliptic wave extrapolation operators. Despite the fact that the effective models are obtained by matching kinematics using high-frequency asymptotic, the resulting wavefield contains most of the critical wavefield components, including frequency dependency and caustics, if present, with reasonable accuracy. The methodology developed here offers a much better cost versus accuracy trade-off for wavefield computations in transversely isotropic media, particularly for media of low to moderate complexity. In addition, the wavefield solution is free from shear-wave artefacts as opposed to the conventional finite-difference-based transversely isotropic wave extrapolation scheme. We demonstrate these assertions through numerical tests on synthetic tilted transversely isotropic models.

An efficient wave extrapolation method for anisotropic media with tilt

KAUST Repository

Waheed, Umair bin; Alkhalifah, Tariq Ali

2015-01-01

Wavefield extrapolation operators for elliptically anisotropic media offer significant cost reduction compared with that for the transversely isotropic case, particularly when the axis of symmetry exhibits tilt (from the vertical). However, elliptical anisotropy does not provide accurate wavefield representation or imaging for transversely isotropic media. Therefore, we propose effective elliptically anisotropic models that correctly capture the kinematic behaviour of wavefields for transversely isotropic media. Specifically, we compute source-dependent effective velocities for the elliptic medium using kinematic high-frequency representation of the transversely isotropic wavefield. The effective model allows us to use cheaper elliptic wave extrapolation operators. Despite the fact that the effective models are obtained by matching kinematics using high-frequency asymptotic, the resulting wavefield contains most of the critical wavefield components, including frequency dependency and caustics, if present, with reasonable accuracy. The methodology developed here offers a much better cost versus accuracy trade-off for wavefield computations in transversely isotropic media, particularly for media of low to moderate complexity. In addition, the wavefield solution is free from shear-wave artefacts as opposed to the conventional finite-difference-based transversely isotropic wave extrapolation scheme. We demonstrate these assertions through numerical tests on synthetic tilted transversely isotropic models.

Designing the Game: How a Project-Based Media Production Program Approaches STEAM Career Readiness for Underrepresented Young Adults

Science.gov (United States)

Bass, Kristin M.; Hu Dahl, Ingrid; Panahandeh, Shirin

2016-12-01

Numerous studies have indicated a need for a diverse workforce that is more highly educated in STEM and ICT fields, and one that is capable of responding creatively to demands for continual innovation. This paper, in response, chronicles the implementation of the Digital Pathways (DP) program, a two-time ITEST recipient and an ongoing initiative of the Bay Area Video Coalition. DP has provided low-income, underrepresented minority young people with 180 contact hours of activities in digital media production to prepare them to pursue higher education and technology careers. A design-based research approach synthesizes staff interviews with student observations, interviews and artifacts to identify a set of generalizable best practices or design principles for empowering young people to move from being consumers of digital media to producers. These principles are illustrated with a case study of the 3D Animation and Gaming track from the second ITEST grant. Researchers argue for the importance of attending to the noncognitive elements of learning and illustrate ways in which instructors encouraged creative expression, personal agency, and collaboration through long-term projects. They also identify strategies for sustaining young people's participation through the establishment of a supportive community environment.

Media Influences on Suicidal Thoughts and Behaviors

DEFF Research Database (Denmark)

Pirkis, Jane E; Mok, Katherine; Robinson, Jo

2016-01-01

This chapter explores the influence of the media on suicidal thoughts and behaviors. Until recently, the vast majority of studies in this area were concerned with traditional forms of media like newspapers and television and looked at the potential for irresponsible reporting of suicide to lead....... The recent proliferation of pro-suicide websites has led to concerns that contagion effects may operate in newer media like the Internet, particularly with the advent of Web 2.0. There are numerous suicide prevention websites, which include educational, interactive, and social networking content. A body...

Effect of base media on the stability of annatto dye in industrial products

International Nuclear Information System (INIS)

Audetuyi, A.O.; Lajide, L.; Popoola, A.V.

2006-01-01

Colour stability of the versatile annatto dye was examined to monitor the effects of base media on industrial products. The dye was incorporated in two media, namely, palm kernel oil used in products such as body cream and soap, and paraffin wax used in shoe polish and household candle wax. These products were exposed to various light conditions for a specific period before assessment. The melting point of the dye was determined as 176-178 degree C with a molar absorptivity of 13,600 mol/sub -1/ cm/sub -1/ at 545 nm. It imparted its brilliant yellow/orange colouration in industrial products as the colour stability depends on the compounding base media of the products. Losses of beta-carotene was higher and faster in nonaqueous environment as paraffin wax showed low fastness rating values, than in the palm kernel oil based aqueous medium products. (author)

A new numerical approximation of the fractal ordinary differential equation

Science.gov (United States)

Atangana, Abdon; Jain, Sonal

2018-02-01

The concept of fractal medium is present in several real-world problems, for instance, in the geological formation that constitutes the well-known subsurface water called aquifers. However, attention has not been quite devoted to modeling for instance, the flow of a fluid within these media. We deem it important to remind the reader that the concept of fractal derivative is not to represent the fractal sharps but to describe the movement of the fluid within these media. Since this class of ordinary differential equations is highly complex to solve analytically, we present a novel numerical scheme that allows to solve fractal ordinary differential equations. Error analysis of the method is also presented. Application of the method and numerical approximation are presented for fractal order differential equation. The stability and the convergence of the numerical schemes are investigated in detail. Also some exact solutions of fractal order differential equations are presented and finally some numerical simulations are presented.

New detection systems of bacteria using highly selective media designed by SMART: selective medium-design algorithm restricted by two constraints.

Directory of Open Access Journals (Sweden)

Takeshi Kawanishi

Full Text Available Culturing is an indispensable technique in microbiological research, and culturing with selective media has played a crucial role in the detection of pathogenic microorganisms and the isolation of commercially useful microorganisms from environmental samples. Although numerous selective media have been developed in empirical studies, unintended microorganisms often grow on such media probably due to the enormous numbers of microorganisms in the environment. Here, we present a novel strategy for designing highly selective media based on two selective agents, a carbon source and antimicrobials. We named our strategy SMART for highly Selective Medium-design Algorithm Restricted by Two constraints. To test whether the SMART method is applicable to a wide range of microorganisms, we developed selective media for Burkholderia glumae, Acidovorax avenae, Pectobacterium carotovorum, Ralstonia solanacearum, and Xanthomonas campestris. The series of media developed by SMART specifically allowed growth of the targeted bacteria. Because these selective media exhibited high specificity for growth of the target bacteria compared to established selective media, we applied three notable detection technologies: paper-based, flow cytometry-based, and color change-based detection systems for target bacteria species. SMART facilitates not only the development of novel techniques for detecting specific bacteria, but also our understanding of the ecology and epidemiology of the targeted bacteria.

Coupled models in porous media: reactive transport and fractures

International Nuclear Information System (INIS)

Amir, L.

2008-12-01

This thesis deals with numerical simulation of coupled models for flow and transport in porous media. We present a new method for coupling chemical reactions and transport by using a Newton-Krylov method, and we also present a model of flow in fractured media, based on a domain decomposition method that takes into account the case of intersecting fractures. This study is composed of three parts: the first part contains an analysis, and implementation, of various numerical methods for discretizing advection-diffusion problems, in particular by using operator splitting methods. The second part is concerned with a fully coupled method for modeling transport and chemistry problems. The coupled transport-chemistry model is described, after discretization in time, by a system of nonlinear equations. The size of the system, namely the number of grid points times the number a chemical species, precludes a direct solution of the linear system. To alleviate this difficulty, we solve the system by a Newton-Krylov method, so as to avoid forming and factoring the Jacobian matrix. In the last part, we present a model of flow in 3D for intersecting fractures, by using a domain decomposition method. The fractures are treated as interfaces between sub-domains. We show existence and uniqueness of the solution, and we validate the model by numerical tests. (author)

Numerical modelling of multicomponent LNAPL dissolution kinetics ...

Indian Academy of Sciences (India)

subsequent removal of free phase liquid, still the organic compounds are present .... Since the flow through porous media is mainly restricted to the pore space ..... initial and boundary conditions for the numerical scheme are given in table 2.

QoE-Driven D2D Media Services Distribution Scheme in Cellular Networks

Directory of Open Access Journals (Sweden)

Mingkai Chen

2017-01-01

Full Text Available Device-to-device (D2D communication has been widely studied to improve network performance and considered as a potential technological component for the next generation communication. Considering the diverse users’ demand, Quality of Experience (QoE is recognized as a new degree of user’s satisfaction for media service transmissions in the wireless communication. Furthermore, we aim at promoting user’s Mean of Score (MOS value to quantify and analyze user’s QoE in the dynamic cellular networks. In this paper, we explore the heterogeneous media service distribution in D2D communications underlaying cellular networks to improve the total users’ QoE. We propose a novel media service scheme based on different QoE models that jointly solve the massive media content dissemination issue for cellular networks. Moreover, we also investigate the so-called Media Service Adaptive Update Scheme (MSAUS framework to maximize users’ QoE satisfaction and we derive the popularity and priority function of different media service QoE expression. Then, we further design Media Service Resource Allocation (MSRA algorithm to schedule limited cellular networks resource, which is based on the popularity function to optimize the total users’ QoE satisfaction and avoid D2D interference. In addition, numerical simulation results indicate that the proposed scheme is more effective in cellular network content delivery, which makes it suitable for various media service propagation.

Philosophy of Media: Is Violence Funny?

Directory of Open Access Journals (Sweden)

Divna Vuksanović

2018-05-01

Full Text Available In the text, from the angle of media philosophy, the relationship between the phenomenon of violence and entertainment in the age of the rule of media culture is re-examined. It first explores whether violence can be defined as violence at all when it comes to its presentation in the media; after the conclusion that in such cases it is always a matter of media transformed violence that goes into something else, the purpose of the massive appearance of violence in today’s media is investigated. In this context of inquiry, particular attention is drawn to the relationship between violence and entertainment that we encounter in the field of cinema and the video game industry.Asked why the entertainment industry uses violence in numerous media content, and whether violence is in itself fun, the answer is denied. Violence by itself can neither be fun; however, as a media product, it is highly profitable. That is why the world of entertainment today is flooded with violent content.

Theoretical and numerical investigations of sub-wavelength diffractive optical structures

DEFF Research Database (Denmark)

Dridi, Kim

2000-01-01

The work in this thesis concerns theoretical and numerical investigations of sub-wavelength diffractive optical structures, relying on advanced two-dimensional vectorial numerical models that have applications in Optics and Electromagnetics. Integrated Optics is predicted to play a major role......, such as in dielectric waveguides with gratings and periodic media or photonic crystal structures. The vectorial electromagnetic nature of light is therefore taken into account in the modeling of these diffractive structures. An electromagnetic vector-field model for optical components design based on the classical...... finite-difference time domain method and exact radiation integrals is implemented for the polarization where the electric field vector is perpendicular to the two dimentional plane of symmetry. The computational model solves the full vectorial time domain Maxwell equations with general sources...

A Numerical Approach to the Dynamic Response of the Deployment System during a Circular Cylinder Crossing through the Wave Zone

Directory of Open Access Journals (Sweden)

Xiaozhou Hu

2017-01-01

Full Text Available The dynamic response of the deployment system while deploying a circular cylinder crossing wave surface and the following submerging process are investigated numerically. The present numerical approach is based on the combination of solution methods of cable dynamics and computational fluid dynamics (CFD. For the implementation of the numerical approach, a cosimulation platform based on a CFD code and MATLAB is developed to study the fluid-solid interaction problem in the process. To generate regular waves, a numerical wave tank is built based on a piston-type wave generation method and a wave damping method applying porous media. Numerical simulations are performed based on the cosimulation platform. The sensitivities of cable tension, velocity, and acceleration of deployed body to different input parameters are investigated, including phase angles, wave heights, and periods of regular waves and deploying velocities, and the effects of those input parameters on dynamic responses of the deployment system are also discussed.

Digital Media-based Health Intervention on the promotion of Women's physical activity: a quasi-experimental study.

Science.gov (United States)

Peyman, Nooshin; Rezai-Rad, Majid; Tehrani, Hadi; Gholian-Aval, Mahdi; Vahedian-Shahroodi, Mohammad; Heidarian Miri, Hamid

2018-01-15

Technological advances have caused poor mobility and lower physical activity among humankind. This study was conducted to assess the impact of a digital media-based (multi-media, internet, and mobile phone) health intervention on promotion of women's physical activity. In this quasi-experimental study, 360 women were divided into case and control groups. The digital media-based educational intervention was conducted in two months in the case group electronically, using mail and Internet and telephone platforms. Physical activity was measured using International Physical Activity Questionnaire (IPAQ) that estimated women's physical activity rate in the previous week. Data was analyzed using descriptive and analytical statistics (ANOVA, chi-square, paired and independent t-tests) using SPSS 20. The mean score of knowledge, attitude and level of physical activity in the control group were not significantly different before and after the intervention. While in the case group, this difference before and after the intervention was significant (p digital media-based health education can be effective in improving health-based behavior such as physical activity. Therefore, it seems necessary to develop user-based strategies and strengthen the behavioral change theories and hypotheses based on digital media for effective influence on behavior. Iranian Registry of Clinical Trials (IRCT), IRCT20160619028529N5 . Registered December 24, 2017 [retrospectively registered].

Media Substitution in Advertising: A Spirited Case Study

OpenAIRE

Mark W. Frank

2006-01-01

This paper uses an unusually rich sample of liquor brands in the U.S. over the period 1994 to 2004 to test substitutability of advertising media. The liquor industry in the U.S. has experienced a substantial increase in case sales and advertising expenditures since the mid-1990s, raising numerous public policy concerns. Moreover, the mix of advertising media used by liquor brands also changed substantially following the industry’s decision in 1996 to begin using radio and television media. We...

Detection and migration of gases in geological media: Experiments and numerical simulations at the Roselend Natural Laboratory

International Nuclear Information System (INIS)

Guillon, S.

2013-01-01

Gas migration in rocks results from natural and artificial processes. Understanding gas migration matters for the Comprehensive Nuclear-Test-Ban Treaty (CTBT), to improve the detection of underground nuclear explosions by their radioactive gases. This work concerns many other fields in Earth Sciences, for fundamental as well as applied science. Issues in improving the detection and the understanding of gas migration in geological media are the following. What are the driving forces of gas migration from depth to the surface? How much of the gases produced at depth do arrive at the surface? Does this migration lead to temporal delays and dilution between production and breakthrough at the surface? To answer these questions, this thesis is dedicated to the identification of gas transport mechanisms in fractured rocks, from both field experiments and numerical simulations. The Roselend Natural Laboratory (French Alps) is a unique facility for studying gas transport in the unsaturated zone at the field scale, representative of natural processes. Parameters and external forcings have been determined. A tunnel and an isolated chamber, at 55 m depth, as well as boreholes at depth and at the surface, allow to monitor gases that are present in the rocks. Pneumatic properties of the rocks, permeability and porosity, were determined at scales ranging from 1 to 55 m, from both pneumatic injection tests and pressure monitoring as well as from computational studies of fluid flow and transport in porous media. Inverse modeling was used to quantify the associated uncertainties. The results underline the strong spatial heterogeneity of fractured media. The natural dynamics of three gases, CO 2 , SF 6 and 222 Rn, was monitored continuously for more than one year. The results, interpreted with numerical simulations, determined that the processes controlling the natural dynamics, or baseline, of gases are atmospheric pressure fluctuations and water movements. Such water movements also

A URI-based approach for addressing fragments of media resources on the Web

NARCIS (Netherlands)

E. Mannens; D. van Deursen; R. Troncy (Raphael); S. Pfeiffer; C. Parker (Conrad); Y. Lafon; A.J. Jansen (Jack); M. Hausenblas; R. van de Walle

2011-01-01

htmlabstractTo make media resources a prime citizen on the Web, we have to go beyond simply replicating digital media files. The Web is based on hyperlinks between Web resources, and that includes hyperlinking out of resources (e.g., from a word or an image within a Web page) as well as hyperlinking

Numerical Simulations of Urea Hydrolysis and Calcite Precipitation in Porous Media Using STOMP

International Nuclear Information System (INIS)

Guo, Luanjing; Huang, Hai; Hu, Bill X.

2010-01-01

Subsurface radionuclide and trace metal contaminants throughout the U.S. Department of Energy (DOE) complex pose one of DOE's greatest challenges for long-term stewardship. One promising in situ immobilization approach of these contaminants is engineered mineral (co)precipitation of calcite driven by urea hydrolysis that is catalyzed by enzyme urease. The tight nonlinear coupling among flow, transport, reaction and reaction-induced property changes of media of this approach was studied by reactive transport simulations with systematically increasing level of complexities of reaction network and physical/chemical heterogeneities using a numerical simulator named STOMP. Sensitivity studies on the reaction rates of both urea hydrolysis and calcite precipitation are performed via controlling urease enzyme concentration and precipitation rate constant according to the rate models employed. We have found that the rate of ureolysis is a dominating factor in the amount of precipitated mineral; however, the spatial distribution of the precipitates depends on both rates of ureolysis and calcite precipitation. A maximum 5% reduction in the porosity was observed within the simulation time period of 6 pore volumes in our 1-dimensional (1D) column simulations. When a low permeability inclusion is considered in the 2D simulations, the altered flow fields redistribute mineral forming constituents, leading to a distorted precipitation reaction front. The simulations also indicate that mineral precipitation occurs along the boundary of the low permeability zone, which implies that contaminants in the low permeability zone could be encapsulated and isolated from the flow paths.

Numerical methods in finance and economics a MATLAB-based introduction

CERN Document Server

Brandimarte, Paolo

2006-01-01

A state-of-the-art introduction to the powerful mathematical and statistical tools used in the field of financeThe use of mathematical models and numerical techniques is a practice employed by a growing number of applied mathematicians working on applications in finance. Reflecting this development, Numerical Methods in Finance and Economics: A MATLAB?-Based Introduction, Second Edition bridges the gap between financial theory and computational practice while showing readers how to utilize MATLAB?--the powerful numerical computing environment--for financial applications.The author provides an essential foundation in finance and numerical analysis in addition to background material for students from both engineering and economics perspectives. A wide range of topics is covered, including standard numerical analysis methods, Monte Carlo methods to simulate systems affected by significant uncertainty, and optimization methods to find an optimal set of decisions.Among this book''s most outstanding features is the...

Identification of suitable media based on hydroponic culture for production Zucchini squash

Directory of Open Access Journals (Sweden)

TP Suvo

2016-12-01

Full Text Available An experiment was conducted to identify the hydroponic culture based suitable media for the production of Zucchini Squash in the Biochemistry Laboratory, Patuakhali Science and Technology University, Dumki, Patuakhali, Bangladesh during 2014. Zucchini plant (Cucurbita pepo L. were grown in closed soilless systems to determine the effect of four different hydroponics media on plant growth, yield and nutrient contents (fruit moisture content, ascorbic acid content on fruit, fruit protein content, protein content in leaves. Three types of substrates (coconut husk, jute, cotton along with Hoagland solution were used in this experiment. Result revealed that media using Jute fiber showed significant effect on plant growth and nutritional values than the other media (media of cotton with Hoagland solution, coconut husk with Hoagland solution and only Hoagland solution. The plant grown using jute media showed the highest plant height (60.33 cm, number of leaves (17.33, yield (1.5 kg plant-1, fruit moisture content (97.33%, Ascorbic acid content in fruit (28.73 mg 100g-1, protein percentage in fruit (1.406% and percentage (1.326% in leaves than the other media. Therefore, with the controlled nutrient supply, less expense, less labor, no use of pesticides or fertilizer with controlled environment the use of jute fiber as a substrate with Hoagland solution can be an effective one.

Trust and Involvement in Tourism Social Media and Web-Based Travel Information Sources

DEFF Research Database (Denmark)

Munar, Ana Maria; KR. Steen Jacobsen, Jens

2013-01-01

-based information. The study also examines tourists' involvement in developing and sharing of virtual content. It critically analyses technological mediation through electronic word-of-mouth and involvement factors related to virtual dissemination of travel narratives. Moreover, the paper discusses information......While utilisation of electronic social media is increasingly relevant as tourism practices, there is still a deficiency of empirical research on tourists' creation and use of various types of online content. This study maps and explores Scandinavian tourists' perceptions of Web 1.0 and Web 2.......0 information sources and scrutinises influence of electronic social media on holidaymakers' information sharing, based on a summer season survey in the mature and well-known destination of Mallorca, Spain. Empirical evidence is presented on perceived trustworthiness of social media platforms and other Internet...

Numerical prediction of critical heat flux in nuclear fuel rod bundles with advanced three-fluid multidimensional porous media based model

International Nuclear Information System (INIS)

Zoran Stosic; Vladimir Stevanovic

2005-01-01

Full text of publication follows: The modern design of nuclear fuel rod bundles for Boiling Water Reactors (BWRs) is characterised with increased number of rods in the bundle, introduced part-length fuel rods and a water channel positioned along the bundle asymmetrically in regard to the centre of the bundle cross section. Such design causes significant spatial differences of volumetric heat flux, steam void fraction distribution, mass flux rate and other thermal-hydraulic parameters important for efficient cooling of nuclear fuel rods during normal steady-state and transient conditions. The prediction of the Critical Heat Flux (CHF) under these complex thermal-hydraulic conditions is of the prime importance for the safe and economic BWR operation. An efficient numerical method for the CHF prediction is developed based on the porous medium concept and multi-fluid two-phase flow models. Fuel rod bundle is observed as a porous medium with a two-phase flow through it. Coolant flow from the bundle entrance to the exit is characterised with the subsequent change of one-phase and several two-phase flow patterns. One fluid (one-phase) model is used for the prediction of liquid heating up in the bundle entrance region. Two-fluid modelling approach is applied to the bubbly and churn-turbulent vapour and liquid flows. Three-fluid modelling approach is applied to the annular flow pattern: liquid film on the rods wall, steam flow and droplets entrained in the steam stream. Every fluid stream in applied multi-fluid models is described with the mass, momentum and energy balance equations. Closure laws for the prediction of interfacial transfer processes are stated with the special emphasis on the prediction of the steam-water interface drag force, through the interface drag coefficient, and droplets entrainment and deposition rates for three-fluid annular flow model. The model implies non-equilibrium thermal and flow conditions. A new mechanistic approach for the CHF prediction

New media coming to Vumilia

DEFF Research Database (Denmark)

Gustafsson, Jessica

2017-01-01

with a steady increase in television ownership. Moreover, cheaper handsets in general, and smart phones in particular, have made Internet and social media available to a growing part of the Kenyan population. Kenya is often referred to as one of the countries on the African continent that is in the forefront....... Nonetheless, it is equally important to recognise that there are variations within this general urban/rural divide, as categories such as gender, age and class do influence people’s access to and use of media. Moreover, rural and urban areas are naturally connected in numerous ways and thus exchange between......In the last two decades, the media landscape has changed rapidly in Kenya. In the 1990s, the Kenyan media market was deregulated, resulting in a substantial increase of private FM stations and TV stations. In recent years, the enormous uptake of mobile telephones has taken place parallel...

Boiling in porous media

International Nuclear Information System (INIS)

1998-01-01

This conference day of the French society of thermal engineers was devoted to the analysis of heat transfers and fluid flows during boiling phenomena in porous media. This book of proceedings comprises 8 communications entitled: 'boiling in porous medium: effect of natural convection in the liquid zone'; 'numerical modeling of boiling in porous media using a 'dual-fluid' approach: asymmetrical characteristic of the phenomenon'; 'boiling during fluid flow in an induction heated porous column'; 'cooling of corium fragment beds during a severe accident. State of the art and the SILFIDE experimental project'; 'state of knowledge about the cooling of a particulates bed during a reactor accident'; 'mass transfer analysis inside a concrete slab during fire resistance tests'; 'heat transfers and boiling in porous media. Experimental analysis and modeling'; 'concrete in accidental situation - influence of boundary conditions (thermal, hydric) - case studies'. (J.S.)

Numerical Simulation on Hydromechanical Coupling in Porous Media Adopting Three-Dimensional Pore-Scale Model

Science.gov (United States)

Liu, Jianjun; Song, Rui; Cui, Mengmeng

2014-01-01

A novel approach of simulating hydromechanical coupling in pore-scale models of porous media is presented in this paper. Parameters of the sandstone samples, such as the stress-strain curve, Poisson's ratio, and permeability under different pore pressure and confining pressure, are tested in laboratory scale. The micro-CT scanner is employed to scan the samples for three-dimensional images, as input to construct the model. Accordingly, four physical models possessing the same pore and rock matrix characteristics as the natural sandstones are developed. Based on the micro-CT images, the three-dimensional finite element models of both rock matrix and pore space are established by MIMICS and ICEM software platform. Navier-Stokes equation and elastic constitutive equation are used as the mathematical model for simulation. A hydromechanical coupling analysis in pore-scale finite element model of porous media is simulated by ANSYS and CFX software. Hereby, permeability of sandstone samples under different pore pressure and confining pressure has been predicted. The simulation results agree well with the benchmark data. Through reproducing its stress state underground, the prediction accuracy of the porous rock permeability in pore-scale simulation is promoted. Consequently, the effects of pore pressure and confining pressure on permeability are revealed from the microscopic view. PMID:24955384

Peer-Based Social Media Features in Behavior Change Interventions: Systematic Review

Science.gov (United States)

Weal, Mark; Morrison, Leanne; Yardley, Lucy

2018-01-01

Background Incorporating social media features into digital behavior change interventions (DBCIs) has the potential to contribute positively to their success. However, the lack of clear design principles to describe and guide the use of these features in behavioral interventions limits cross-study comparisons of their uses and effects. Objective The aim of this study was to provide a systematic review of DBCIs targeting modifiable behavioral risk factors that have included social media features as part of their intervention infrastructure. A taxonomy of social media features is presented to inform the development, description, and evaluation of behavioral interventions. Methods Search terms were used in 8 databases to identify DBCIs that incorporated social media features and targeted tobacco smoking, diet and nutrition, physical activities, or alcohol consumption. The screening and review process was performed by 2 independent researchers. Results A total of 5264 articles were screened, and 143 articles describing a total of 134 studies were retained for full review. The majority of studies (70%) reported positive outcomes, followed by 28% finding no effects with regard to their respective objectives and hypothesis, and 2% of the studies found that their interventions had negative outcomes. Few studies reported on the association between the inclusion of social media features and intervention effect. A taxonomy of social media features used in behavioral interventions has been presented with 36 social media features organized under 7 high-level categories. The taxonomy has been used to guide the analysis of this review. Conclusions Although social media features are commonly included in DBCIs, there is an acute lack of information with respect to their effect on outcomes and a lack of clear guidance to inform the selection process based on the features’ suitability for the different behaviors. The proposed taxonomy along with the set of recommendations included

Cloud-Based Social Media Visual Analytics Disaster Response System, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — We propose a next-generation cloud-based social media visual analytics disaster response system that will enable decision-makers and first-responders to obtain...

A Comparative Analysis of User Preferences for for Major Internet Based Education Media in China

Science.gov (United States)

Wan, Chunyang; Jiang, Yanqing

2014-01-01

Internet based education media are developing at an amazing rate and being seen as an upstart that will likely take the place of traditional education means worldwide in the future. This paper presents the results of a comparative analysis on user preferences for four major categories of internet-based media used in China. In this paper, we first…

An algorithm for solving the optical problem for stratified anisotropic media

Energy Technology Data Exchange (ETDEWEB)

Palto, S P [Shubnikov Institute of Crystallography, Russian Academy of Sciences, Leninskii pr. 59, Moscow, 117333 (Russian Federation)

2001-04-01

An algorithm for solving the Maxwell equations for propagation of light through anisotropic stratified media is considered. The algorithm uses the Berreman matrices of order 4 x 4. In contrast to the numerical methods suggested by Berreman, the new method is exact. The Sylvester theorem for calculating functions of a matrix and the Laguerre method for determining eigenvalues provide the basis for an algorithm with an efficiency comparable to that of the algorithms based on analytic solutions, which exist only in the case of uniaxial media. The method suggested in this paper allows for the analysis of complex optical systems where the effects of biaxiality, magnetic anisotropy, and optical activity play an important role.

Direct Calculation of Permeability by High-Accurate Finite Difference and Numerical Integration Methods

KAUST Repository

Wang, Yi

2016-07-21

Velocity of fluid flow in underground porous media is 6~12 orders of magnitudes lower than that in pipelines. If numerical errors are not carefully controlled in this kind of simulations, high distortion of the final results may occur [1-4]. To fit the high accuracy demands of fluid flow simulations in porous media, traditional finite difference methods and numerical integration methods are discussed and corresponding high-accurate methods are developed. When applied to the direct calculation of full-tensor permeability for underground flow, the high-accurate finite difference method is confirmed to have numerical error as low as 10-5% while the high-accurate numerical integration method has numerical error around 0%. Thus, the approach combining the high-accurate finite difference and numerical integration methods is a reliable way to efficiently determine the characteristics of general full-tensor permeability such as maximum and minimum permeability components, principal direction and anisotropic ratio. Copyright © Global-Science Press 2016.

Developing group investigation-based book on numerical analysis to increase critical thinking student’s ability

Science.gov (United States)

Maharani, S.; Suprapto, E.

2018-03-01

Critical thinking is very important in Mathematics; it can make student more understanding mathematics concept. Critical thinking is also needed in numerical analysis. The Numerical analysis's book is not yet including critical thinking in them. This research aims to develop group investigation-based book on numerical analysis to increase critical thinking student’s ability, to know the quality of the group investigation-based book on numerical analysis is valid, practical, and effective. The research method is Research and Development (R&D) with the subject are 30 student college department of Mathematics education at Universitas PGRI Madiun. The development model used is 4-D modified to 3-D until the stage development. The type of data used is descriptive qualitative data. Instruments used are sheets of validation, test, and questionnaire. Development results indicate that group investigation-based book on numerical analysis in the category of valid a value 84.25%. Students response to the books very positive, so group investigation-based book on numerical analysis category practical, i.e., 86.00%. The use of group investigation-based book on numerical analysis has been meeting the completeness criteria classical learning that is 84.32 %. Based on research result of this study concluded that group investigation-based book on numerical analysis is feasible because it meets the criteria valid, practical, and effective. So, the book can be used by every mathematics academician. The next research can be observed that book based group investigation in other subjects.

Amalgamation of interacting light beamlets in Kerr-type media

DEFF Research Database (Denmark)

Christiansen, Peter Leth; Rasmussen, Kim; Berge, L

1997-01-01

The interaction of optical filaments in bulk self-focusing media is investigated theoretically and numerically. The nature of this interaction is shown to vary with the incident individual powers and relative phases of the beamlets. By means of virial arguments supported by numerical results it i...

Faith-Based Media Literacy Education: A Look at the Past with an Eye toward the Future

Science.gov (United States)

Iaquinto, Stephanie; Keeler, John

2012-01-01

This article addresses several fundamental questions about faith-based media literacy education in the United States, including how the assumptions, motivations, goals, and pedagogy of those Christians who are operating within a media literacy framework come together to create a unique approach to teaching media literacy. After briefly reviewing…

Contributions to the uncertainty management in numerical modelization: wave propagation in random media and analysis of computer experiments

International Nuclear Information System (INIS)

Iooss, B.

2009-01-01

The present document constitutes my Habilitation thesis report. It recalls my scientific activity of the twelve last years, since my PhD thesis until the works completed as a research engineer at CEA Cadarache. The two main chapters of this document correspond to two different research fields both referring to the uncertainty treatment in engineering problems. The first chapter establishes a synthesis of my work on high frequency wave propagation in random medium. It more specifically relates to the study of the statistical fluctuations of acoustic wave travel-times in random and/or turbulent media. The new results mainly concern the introduction of the velocity field statistical anisotropy in the analytical expressions of the travel-time statistical moments according to those of the velocity field. This work was primarily carried by requirements in geophysics (oil exploration and seismology). The second chapter is concerned by the probabilistic techniques to study the effect of input variables uncertainties in numerical models. My main applications in this chapter relate to the nuclear engineering domain which offers a large variety of uncertainty problems to be treated. First of all, a complete synthesis is carried out on the statistical methods of sensitivity analysis and global exploration of numerical models. The construction and the use of a meta-model (inexpensive mathematical function replacing an expensive computer code) are then illustrated by my work on the Gaussian process model (kriging). Two additional topics are finally approached: the high quantile estimation of a computer code output and the analysis of stochastic computer codes. We conclude this memory with some perspectives about the numerical simulation and the use of predictive models in industry. This context is extremely positive for future researches and application developments. (author)

Social Media for the Promotion of Holistic Self-Participatory Care: An Evidence Based Approach. Contribution of the IMIA Social Media Working Group.

Science.gov (United States)

Miron-Shatz, T; Hansen, M M; Grajales, F J; Martin-Sanchez, F; Bamidis, P D

2013-01-01

As health information is becoming increasingly accessible, social media offers ample opportunities to track, be informed, share and promote health. These authors explore how social media and holistic care may work together; more specifically however, our objective is to document, from different perspectives, how social networks have impacted, supported and helped sustain holistic self-participatory care. A literature review was performed to investigate the use of social media for promoting health in general and complementary alternative care. We also explore a case study of an intervention for improving the health of Greek senior citizens through digital and other means. The Health Belief Model provides a framework for assessing the benefits of social media interventions in promoting comprehensive participatory self-care. Some interventions are particularly effective when integrating social media with real-world encounters. Yet not all social media tools are evidence-based and efficacious. Interestingly, social media is also used to elicit patient ratings of treatments (e.g., for depression), often demonstrating the effectiveness of complementary treatments, such as yoga and mindfulness meditation. To facilitate the use of social media for the promotion of complementary alternative medicine through self-quantification, social connectedness and sharing of experiences, exploration of concrete and abstract ideas are presented here within. The main mechanisms by which social support may help improve health - emotional support, an ability to share experiences, and non-hierarchal roles, emphasizing reciprocity in giving and receiving support - are integral to social media and provide great hope for its effective use.

A Narrative Review of Social Media and Game-Based Nutrition Interventions Targeted at Young Adults.

Science.gov (United States)

Nour, Monica; Yeung, Sin Hang; Partridge, Stephanie; Allman-Farinelli, Margaret

2017-05-01

The increased popularity of social media and mobile gaming among young adults provides an opportunity for innovative nutrition programs. This review evaluated the efficacy of these strategies in interventions targeted at 18- to 35-year-olds. The protocol was guided by the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). Ten scientific databases, information technology conference proceedings, and gray literature were searched. Two reviewers conducted screening, data extraction, and quality assessments. Interventions were included if they used social media or electronic games. Comparisons were made pre- to post-intervention, or between intervention and control arms. Outcomes of interest included change in nutrition knowledge, attitudes, behavior, or weight and/or body composition. Eleven social media-based (randomized controlled trials [RCT] n=7) and six game-based [RCT n=1]) interventions were included. Overall quality of studies was low. Social media-based strategies included forum/blogs (n=5), Facebook (n=5), Twitter (n=1), YouTube (n=1), and chat rooms (n=1). Eight (RCT n=6) of 11 social media-based studies demonstrated improvements in outcomes. Findings suggested that social media may be more effective when combined with other strategies. Virtual reality games (n=3), web-based games (n=2), and a mobile application (n=1) were used in the gaming interventions. While a significant increase in knowledge was reported by three gaming studies (RCT=1), two used nonvalidated tools and longer-term measures of weight and behavioral outcomes were limited. The use of social media and gaming for nutrition promotion is in its infancy. Preliminary evidence suggests that these strategies have some utility for intervening with young adults. Further research using high-quality study designs is required, with measurement of outcomes over longer time periods. The systematic review protocol is registered with PROSPERO (registration number: CRD42015025427

The effective thermal conductivity of porous media based on statistical self-similarity

International Nuclear Information System (INIS)

Kou Jianlong; Wu Fengmin; Lu Hangjun; Xu Yousheng; Song Fuquan

2009-01-01

A fractal model is presented based on the thermal-electrical analogy technique and statistical self-similarity of fractal saturated porous media. A dimensionless effective thermal conductivity of saturated fractal porous media is studied by the relationship between the dimensionless effective thermal conductivity and the geometrical parameters of porous media with no empirical constant. Through this study, it is shown that the dimensionless effective thermal conductivity decreases with the increase of porosity (φ) and pore area fractal dimension (D f ) when k s /k g >1. The opposite trends is observed when k s /k g t ). The model predictions are compared with existing experimental data and the results show that they are in good agreement with existing experimental data.

Are the nonionic contrast media really safe

International Nuclear Information System (INIS)

Seyferth, W.; Zeitler, E.

1987-01-01

The authors used a wide variety of ionic and nonionic contrast media in 11,203 patient examinations (angiography, phlebography, CT). Data have been collected in prospective studies since 1982. The rate of mild side effects was reduced by a factor of 2 to 3 for all examinations when nonionic contrast media were used. Angiography may not be suitable for evaluating the safety of contrast media. Because of statistical requirements, the influence of nonionic media on the rate of severe side effects will not be known for some time. The side effects of nonionic contrast media were somewhat delayed, and differed from times reported in the literature: 29% of wide effects were noticed within 15 minutes and 71% between 25 minutes to 72 hours after the study. The final results of the study will have numerous consequences for patient treatment protocols

Media Representations of Breech Birth: A Prospective Analysis of Web-Based News Reports.

Science.gov (United States)

Petrovska, Karolina; Sheehan, Athena; Homer, Caroline S E

2017-07-01

Recent research has demonstrated that the media presentation of childbirth is highly medicalized, often portraying birth as risky and dramatic. Media representation of breech presentation and birth is unexplored in this context. This study aimed to explore the content and tone of news media reports relating to breech presentation and breech birth. Google alerts were created using the terms breech and breech birth in online English-language news sites over a 3-year period from January 1, 2013, to December 31, 2015. Alerts were received daily and filed for analysis, and data were analyzed to generate themes. A total of 138 web-based news reports were gathered from 9 countries. Five themes that arose from the data included the problem of breech presentation, the high drama of vaginal breech birth, the safe option of cesarean birth versus dangers of vaginal breech birth, the defiant mother versus the saintly mother, and vaginal breech birth and medical misadventure. Media reports in this study predominantly demonstrated negative views toward breech presentation and vaginal breech birth. Cesarean birth was portrayed as the safe option for breech birth, while vaginal breech birth was associated with poor outcomes. Media presentations may impact decision making about mode of birth for pregnant women with a breech fetus. Health care providers can play an important role in balancing the media depiction of planned vaginal breech birth by providing nonjudgmental, evidence-based information to such women to facilitate informed decision making for birth. © 2017 by the American College of Nurse-Midwives.

Internet-based media coverage on dengue in Sri Lanka between 2007 and 2015

Directory of Open Access Journals (Sweden)

Annelies Wilder-Smith

2016-05-01

Full Text Available Background: Internet-based media coverage to explore the extent of awareness of a disease and perceived severity of an outbreak at a national level can be used for early outbreak detection. Dengue has emerged as a major public health problem in Sri Lanka since 2009. Objective: To compare Internet references to dengue in Sri Lana with references to other diseases (malaria and influenza in Sri Lanka and to compare Internet references to dengue in Sri Lanka with notified cases of dengue in Sri Lanka. Design: We examined Internet-based news media articles on dengue queried from HealthMap for Sri Lanka, for the period January 2007 to November 2015. For comparative purposes, we compared hits on dengue with hits on influenza and malaria. Results: There were 565 hits on dengue between 2007 and 2015, with a rapid rise in 2009 and followed by a rising trend ever since. These hits were highly correlated with the national epidemiological trend of dengue. The volume of digital media coverage of dengue was much higher than of influenza and malaria. Conclusions: Dengue in Sri Lanka is receiving increasing media attention. Our findings underpin previous claims that digital media reports reflect national epidemiological trends, both in annual trends and inter-annual seasonal variation, thus acting as proxy biosurveillance to provide early warning and situation awareness of emerging infectious diseases.

A SOCIAL MEDIA CAMPAIGN APPLICATION IN A MARKETING FIELD EXPERIENCE COURSE

OpenAIRE

Mine Ucok Hughes

2014-01-01

Most university students today use social media daily, are knowledgeable about a myriad of applications, and can navigate numerous platforms, such as Facebook and Twitter. Despite their affinity for social media, however, it is not clear whether or not they understand how social media can be used to create effective marketing strategies. This paper describes a social media assignment that was incorporated into a marketing field experience course for undergraduate students. The aim of the pape...

Harnessing the landscape of microbial culture media to predict new organism–media pairings

Science.gov (United States)

Oberhardt, Matthew A.; Zarecki, Raphy; Gronow, Sabine; Lang, Elke; Klenk, Hans-Peter; Gophna, Uri; Ruppin, Eytan

2015-01-01

Culturing microorganisms is a critical step in understanding and utilizing microbial life. Here we map the landscape of existing culture media by extracting natural-language media recipes into a Known Media Database (KOMODO), which includes >18,000 strain–media combinations, >3300 media variants and compound concentrations (the entire collection of the Leibniz Institute DSMZ repository). Using KOMODO, we show that although media are usually tuned for individual strains using biologically common salts, trace metals and vitamins/cofactors are the most differentiating components between defined media of strains within a genus. We leverage KOMODO to predict new organism–media pairings using a transitivity property (74% growth in new in vitro experiments) and a phylogeny-based collaborative filtering tool (83% growth in new in vitro experiments and stronger growth on predicted well-scored versus poorly scored media). These resources are integrated into a web-based platform that predicts media given an organism's 16S rDNA sequence, facilitating future cultivation efforts. PMID:26460590

Prediction of 222 Rn exhalation rates from phosphogypsum based stacks. Part II: preliminary numerical results

International Nuclear Information System (INIS)

Rabi, Jose A.; Mohamad, Abdulmajeed A.

2004-01-01

The first part of this paper proposes a steady-state 2-D model for 222 Rn transport in phosphogypsum stacks. In this second part, the dimensionless model equations are solved numerically with the help of an existing finite-volume simulator that has been successfully used to solve heat and mass transfer problems in porous media. As a test case, a rectangular shaped stack is considered in order to verify the ability of the proposed parametric approach to account for concurrent effects on the 222 Rn exhalation into the local atmosphere. Air flow is supposed to be strictly buoyancy driven and the ground is assumed to be impermeable to 222 Rn and at a higher temperature under the stack base. Dimensionless controlling parameters are set to representative values and results are presented for Grashof number in the range 10 6 ≤Gr≤ 10 8 , corresponding to very small to small temperature differences between incoming air and ground underneath the stack base. For the particular set of parameters and inasmuch as Gr increases, streamlines presented basically the same pattern while internal isotherms and iso concentration lines remained almost unchanged. Total average Sherwood number proved to be rather insensitive to Gr while total average Nusselt increased slightly with Gr. (author)

Awareness of media-based antitobacco messages among a community sample of LGBT individuals.

Science.gov (United States)

Matthews, Alicia K; Balsam, Kimberly; Hotton, Anna; Kuhns, Lisa; Li, Chien-Ching; Bowen, Deborah J

2014-11-01

Study objectives were to measure awareness of general antitobacco messages in LGBT-focused and general media outlets among LGBT (lesbian, gay, bisexual, and transgender) individuals and to examine associations between sociodemographic characteristics and awareness levels. Data were based on cross-sectional survey data from a racially diverse sample of participants (N = 726). Participants were primarily male (69.3%), with smaller percentages of female (21.8%) and transgender (8.9%). The median age was 31 years. A higher proportion of participants reported awareness of antitobacco messages in general media outlets compared to LGBT-specific media outlets. Awareness of antitobacco messages in general media was positively associated with current smoking and negatively associated with female gender and Latino ethnicity. Awareness of antitobacco messages in LGBT media was positively associated with younger age, current smoking, frequent reading of LGBT newspapers or magazines, and frequent attendance at LGBT bars and negatively associated with Latino ethnicity. Despite frequent readership, awareness of antitobacco messages in LGBT newspapers/magazines was quite low. We speculate that low awareness is related to the absence of antitobacco messages in LGBT-related media. LGBT-specific media outlets provide an important opportunity for future antitobacco campaigns. © 2014 Society for Public Health Education.

Combining In-School and Community-Based Media Efforts: Reducing Marijuana and Alcohol Uptake among Younger Adolescents

Science.gov (United States)

Slater, Michael D.; Kelly, Kathleen J.; Edwards, Ruth W.; Thurman, Pamela J.; Plested, Barbara A.; Keefe, Thomas J.; Lawrence, Frank R.; Henry, Kimberly L.

2006-01-01

This study tests the impact of an in-school mediated communication campaign based on social marketing principles, in combination with a participatory, community-based media effort, on marijuana, alcohol and tobacco uptake among middle-school students. Eight media treatment and eight control communities throughout the US were randomly assigned to…

Skull Base Osteomyelitis from Otitis Media Presenting as the Collet-Sicard Syndrome

Directory of Open Access Journals (Sweden)

Wong-Kein Low

2018-01-01

Full Text Available Skull base osteomyelitis can involve the jugular foramen and its associated cranial nerves resulting in specific clinical syndromes. The Collet-Sicard syndrome describes the clinical manifestations of palsies involving cranial nerves IX, X, XI, and XII. We present a rare atypical case of skull base osteomyelitis originating from infection of the middle ear and causing the Collet-Sicard syndrome. Caused by Pseudomonas aeruginosa and Klebsiella pneumoniae, this occurred in an elderly diabetic man subsequent to retention of a cotton swab in an ear with chronic suppurative otitis media. This case report illustrates the possibility of retained cotton swabs contributing to the development of otitis media, skull base osteomyelitis, and ultimately the Collet-Sicard syndrome in the ears of immune-compromised patients with chronically perforated eardrums.

The effect of numerical techniques on differential equation based chaotic generators

KAUST Repository

Zidan, Mohammed A.

2012-07-29

In this paper, we study the effect of the numerical solution accuracy on the digital implementation of differential chaos generators. Four systems are built on a Xilinx Virtex 4 FPGA using Euler, mid-point, and Runge-Kutta fourth order techniques. The twelve implementations are compared based on the FPGA used area, maximum throughput, maximum Lyapunov exponent, and autocorrelation confidence region. Based on circuit performance and the chaotic response of the different implementations, it was found that less complicated numerical solution has better chaotic response and higher throughput.

Simulation of DNAPL migration in heterogeneous translucent porous media based on estimation of representative elementary volume

Science.gov (United States)

Wu, Ming; Wu, Jianfeng; Wu, Jichun

2017-10-01

When the dense nonaqueous phase liquid (DNAPL) comes into the subsurface environment, its migration behavior is crucially affected by the permeability and entry pressure of subsurface porous media. A prerequisite for accurately simulating DNAPL migration in aquifers is then the determination of the permeability, entry pressure and corresponding representative elementary volumes (REV) of porous media. However, the permeability, entry pressure and corresponding representative elementary volumes (REV) are hard to determine clearly. This study utilizes the light transmission micro-tomography (LTM) method to determine the permeability and entry pressure of two dimensional (2D) translucent porous media and integrates the LTM with a criterion of relative gradient error to quantify the corresponding REV of porous media. As a result, the DNAPL migration in porous media might be accurately simulated by discretizing the model at the REV dimension. To validate the quantification methods, an experiment of perchloroethylene (PCE) migration is conducted in a two-dimensional heterogeneous bench-scale aquifer cell. Based on the quantifications of permeability, entry pressure and REV scales of 2D porous media determined by the LTM and relative gradient error, different models with different sizes of discretization grid are used to simulate the PCE migration. It is shown that the model based on REV size agrees well with the experimental results over the entire migration period including calibration, verification and validation processes. This helps to better understand the microstructures of porous media and achieve accurately simulating DNAPL migration in aquifers based on the REV estimation.

Combining in-school and community-based media efforts: reducing marijuana and alcohol uptake among younger adolescents.

Science.gov (United States)

Slater, Michael D; Kelly, Kathleen J; Edwards, Ruth W; Thurman, Pamela J; Plested, Barbara A; Keefe, Thomas J; Lawrence, Frank R; Henry, Kimberly L

2006-02-01

This study tests the impact of an in-school mediated communication campaign based on social marketing principles, in combination with a participatory, community-based media effort, on marijuana, alcohol and tobacco uptake among middle-school students. Eight media treatment and eight control communities throughout the US were randomly assigned to condition. Within both media treatment and media control communities, one school received a research-based prevention curriculum and one school did not, resulting in a crossed, split-plot design. Four waves of longitudinal data were collected over 2 years in each school and were analyzed using generalized linear mixed models to account for clustering effects. Youth in intervention communities (N = 4,216) showed fewer users at final post-test for marijuana [odds ratio (OR) = 0.50, P = 0.019], alcohol (OR = 0.40, P = 0.009) and cigarettes (OR = 0.49, P = 0.039), one-tailed. Growth trajectory results were significant for marijuana (P = 0.040), marginal for alcohol (P = 0.051) and non-significant for cigarettes (P = 0.114). Results suggest that an appropriately designed in-school and community-based media effort can reduce youth substance uptake. Effectiveness does not depend on the presence of an in-school prevention curriculum.

The Effect of Project Based Learning With Virtual Media Assistance on Student’s Creativity in Physics

Directory of Open Access Journals (Sweden)

Gunawan Gunawan

2017-06-01

Full Text Available Abstract: Physics learning should be able to provide opportunities for learners to be creative in understanding the things that learned. One of the efforts made to improve the quality of physics learning was to apply the model of project based learning with virtual media. This study aimed to examine the effect of virtual media-aided model toward students’ creativity. This quasi experimental study used pretest-posttest control group design. The research instrument used a verbal and figural creativity test which had been validated by experts. Hypothesis test used employed variance test. The increase in creativity was determined based on the results of the N-gain test. The results showed that there was an increase of students' creativity in both classes. The experiment class had a higher creativity increase than the control class. Verbal and figural creativity improved in both classes. Verbal creativity increased higher than figural creativity. This shows that the model of project based learning with virtual media that applied successfully improve the students’ creativity in physics learning. EFEKTIVITAS PENERAPAN MODEL PROJECT BASED LEARNING BERBANTUAN MEDIA VIRTUAL TERHADAP KREATIVITAS FISIKA PESERTA DIDIK Abstrak: Pembelajaran fisika seharusnya mampu memberikan peluang bagi peserta didik untuk berkreasi dalam memahami hal yang dipelajari. Salah satu upaya yang dilakukan untuk meningkatkan kualitas pembelajaran fisika adalah dengan menerapkan model project based learning berbantuan media virtual. Penelitian ini bertujuan menguji pengaruh model berbantuan media virtual terhadap kreativitas peserta didik. Penelitian kuasi eksperimen ini menggunakan pretest-posttest control group design. Instrumen penelitian menggunakan tes kreativitas verbal dan figural yang telah divalidasi oleh para ahli. Uji hipotesis menggunakan uji t polled varian. Peningkatan kreativitas ditentukan berdasarkan hasil uji N-gain. Hasil penelitian menunjukkan adanya

Peer-Based Social Media Features in Behavior Change Interventions: Systematic Review.

Science.gov (United States)

Elaheebocus, Sheik Mohammad Roushdat Ally; Weal, Mark; Morrison, Leanne; Yardley, Lucy

2018-02-22

Incorporating social media features into digital behavior change interventions (DBCIs) has the potential to contribute positively to their success. However, the lack of clear design principles to describe and guide the use of these features in behavioral interventions limits cross-study comparisons of their uses and effects. The aim of this study was to provide a systematic review of DBCIs targeting modifiable behavioral risk factors that have included social media features as part of their intervention infrastructure. A taxonomy of social media features is presented to inform the development, description, and evaluation of behavioral interventions. Search terms were used in 8 databases to identify DBCIs that incorporated social media features and targeted tobacco smoking, diet and nutrition, physical activities, or alcohol consumption. The screening and review process was performed by 2 independent researchers. A total of 5264 articles were screened, and 143 articles describing a total of 134 studies were retained for full review. The majority of studies (70%) reported positive outcomes, followed by 28% finding no effects with regard to their respective objectives and hypothesis, and 2% of the studies found that their interventions had negative outcomes. Few studies reported on the association between the inclusion of social media features and intervention effect. A taxonomy of social media features used in behavioral interventions has been presented with 36 social media features organized under 7 high-level categories. The taxonomy has been used to guide the analysis of this review. Although social media features are commonly included in DBCIs, there is an acute lack of information with respect to their effect on outcomes and a lack of clear guidance to inform the selection process based on the features' suitability for the different behaviors. The proposed taxonomy along with the set of recommendations included in this review will support future research aimed

Locative media

CERN Document Server

Wilken, Rowan

2014-01-01

Not only is locative media one of the fastest growing areas in digital technology, but questions of location and location-awareness are increasingly central to our contemporary engagements with online and mobile media, and indeed media and culture generally. This volume is a comprehensive account of the various location-based technologies, services, applications, and cultures, as media, with an aim to identify, inventory, explore, and critique their cultural, economic, political, social, and policy dimensions internationally. In particular, the collection is organized around the perception that the growth of locative media gives rise to a number of crucial questions concerning the areas of culture, economy, and policy.

Impacts of social media in restaurant businesses : A case study of restaurants based on Oulu region

OpenAIRE

Timilsina, Manoj

2017-01-01

Social media’s acceptance rate has been increasing day by day. All kinds of business are adopting social media as crucial tool for implementing business and marketing strategies. This research is done to highlight the impacts of social media in restaurants of Oulu based restaurants. The main objective of this thesis is to examine the impacts social media has in business and how social media is influencing business activities. Furthermore, this research provides a brief information of soci...

Measuring News Media Literacy

Science.gov (United States)

Maksl, Adam; Ashley, Seth; Craft, Stephanie

2015-01-01

News media literacy refers to the knowledge and motivations needed to identify and engage with journalism. This study measured levels of news media literacy among 500 teenagers using a new scale measure based on Potter's model of media literacy and adapted to news media specifically. The adapted model posits that news media literate individuals…

THE FREQUENCY OF USING SCREEN-BASED MEDIA AMONG CHILDREN AND ADOLESCENTS AND ITS IMPACT ON HEALTH-RELATED BEHAVIORS

Directory of Open Access Journals (Sweden)

Aleksandar Višnjić

2015-09-01

Full Text Available Screen-based media are becoming an increasingly important part of life for today’s children and adolescents. That is why our purpose was to review the literature published within the past 10 years regarding the use and impact of TV, video game, and computer /Internet on youth health outcomes including how they affect their psychosocial outcomes and physical well-being. Systematic literature search for and analysis of a variety of media used by children and adolescents from a public health perspective was done. Literature was reviewed from May to July 2014. Children and adolescents spend a great deal of time using screen-based media. This high overall electronic media use was associated with poorer behavior and health status. A large part of this younger generation’s social and emotional development is occurring while on the Internet and on cell phones. Screen-based media use was mutually associated, and the plural use of these media had stronger associations with unhealthy lifestyles and subjective health complaints. Various physical complaints, like obesity, backache and headache, neck-shoulder pain, and sleep disorders were also found significant. Children and adolescents are consumers, but also they are producers of social media. Public health professionals and society as a whole should increase health education on screen-based media consumption, by stimulating reasonable use and teaching youth to be critical. Parents can be most helpful if they understand the core issues and have strategies for dealing with them.

MODERN MEDIA EDUCATION MODELS

Directory of Open Access Journals (Sweden)

Alexander Fedorov

2011-03-01

Full Text Available The author supposed that media education models can be divided into the following groups:- educational-information models (the study of the theory, history, language of media culture, etc., based on the cultural, aesthetic, semiotic, socio-cultural theories of media education;- educational-ethical models (the study of moral, religions, philosophical problems relying on the ethic, religious, ideological, ecological, protectionist theories of media education;- pragmatic models (practical media technology training, based on the uses and gratifications and ‘practical’ theories of media education;- aesthetical models (aimed above all at the development of the artistic taste and enriching the skills of analysis of the best media culture examples. Relies on the aesthetical (art and cultural studies theory; - socio-cultural models (socio-cultural development of a creative personality as to the perception, imagination, visual memory, interpretation analysis, autonomic critical thinking, relying on the cultural studies, semiotic, ethic models of media education.

Speckle-learning-based object recognition through scattering media.

Science.gov (United States)

Ando, Takamasa; Horisaki, Ryoichi; Tanida, Jun

2015-12-28

We experimentally demonstrated object recognition through scattering media based on direct machine learning of a number of speckle intensity images. In the experiments, speckle intensity images of amplitude or phase objects on a spatial light modulator between scattering plates were captured by a camera. We used the support vector machine for binary classification of the captured speckle intensity images of face and non-face data. The experimental results showed that speckles are sufficient for machine learning.

A Numerical Matrix-Based method in Harmonic Studies in Wind Power Plants

DEFF Research Database (Denmark)

Dowlatabadi, Mohammadkazem Bakhshizadeh; Hjerrild, Jesper; Kocewiak, Łukasz Hubert

2016-01-01

In the low frequency range, there are some couplings between the positive- and negative-sequence small-signal impedances of the power converter due to the nonlinear and low bandwidth control loops such as the synchronization loop. In this paper, a new numerical method which also considers...... these couplings will be presented. The numerical data are advantageous to the parametric differential equations, because analysing the high order and complex transfer functions is very difficult, and finally one uses the numerical evaluation methods. This paper proposes a numerical matrix-based method, which...

Numerical analysis of a polysilicon-based resistive memory device

KAUST Repository

Berco, Dan; Chand, Umesh

2018-01-01

This study investigates a conductive bridge resistive memory device based on a Cu top electrode, 10-nm polysilicon resistive switching layer and a TiN bottom electrode, by numerical analysis for $$10^{3}$$103 programming and erase simulation cycles

A numerical solution of the equation of the computerized tomography and its application in astrophysics

International Nuclear Information System (INIS)

Krastev, A.; Nedialkov, J.

1983-01-01

A method for numerical solving the equation of the computerized tomography is proposed. The method, is based on the Cormack's formulae and is applied for studying media with central symmetry. The generalization for the nonsymmetric case does not lead to complications. The method is applied for the investigation of the density distribution of the Earth, the other planets and the Sun by means of neutrino experiments

Effective media models for unsaturated fractured rock: A field experiment

International Nuclear Information System (INIS)

Nicholl, M.J.; Glass, R.J.

1995-01-01

A thick unsaturated rock mass at Yucca Mountain is currently under consideration as a potential repository site for disposal of high level radioactive waste. In accordance with standard industry and scientific practices, abstract numerical models will be used to evaluate the potential for radionuclide release through the groundwater system. At this time, currently available conceptual models used to develop effective media properties are based primarily on simplistic considerations. The work presented here is part of an integrated effort to develop effective media models at the intermediate block scale (approximately 8-125m) through a combination of physical observations, numerical simulations and theoretical considerations. A multi-purpose field experiment designed and conducted as part of this integrated effort is described. Specific goals of this experimental investigation were to: (1) obtain fracture network data from Topopah Spring Tuff for use in block scale simulations; (2) identity positions of the network conducting flow under three different boundary conditions; (3) visualize preferential flow paths and small-scale flow structures; (4) collect samples for subsequent hydraulic testing and use in block-scale simulations; and (5) demonstrate the ability of Electrical Resistance Tomography (ERT) to delineate fluid distribution within fractured rock

Photography and Social Media Use in Community-Based Participatory Research with Youth: Ethical Considerations.

Science.gov (United States)

Kia-Keating, Maryam; Santacrose, Diana; Liu, Sabrina

2017-12-01

Community-based participatory researchers increasingly incorporate photography and social media into their work. Despite its relative infancy, social media has created a powerful network that allows individuals to convey messages quickly to a widespread audience. In addition to its potential benefits, the use of social media in research also carries risk, given the fast pace of exchanges, sharing of personal images and ideas in high accessibility, low privacy contexts and continually shifting options and upgrades. This article contributes to the literature examining ethical considerations for photography and social media use in community-based participatory research. We describe three key ethical dilemmas that we encountered during our participatory photography project with Latina/o youth: (a) use and content of images and risk; (b) incentives and coercion; and (c) social media activity and confidentiality. We provide our responses to these challenges, contextualized in theory and practice, and share lessons learned. We raise the question of how to contend with cultural shifts in boundaries and privacy. We propose that evaluating participant vulnerability versus potential empowerment may be more fitting than the standard approach of assessing risks and benefits. Finally, we recommend upholding the principles of participatory research by co-producing ethical practices with one's participants. © Society for Community Research and Action 2017.

Critical power for self-focusing of optical beam in absorbing media

Science.gov (United States)

Qi, Pengfei; Zhang, Lin; Lin, Lie; Zhang, Nan; Wang, Yan; Liu, Weiwei

2018-04-01

Self-focusing effects are of central importance for most nonlinear optical effects. The critical power for self-focusing is commonly investigated theoretically without considering a material’s absorption. Although this is practicable for various materials, investigating the critical power for self-focusing in media with non-negligible absorption is also necessary, because this is the situation usually met in practice. In this paper, the simple analytical expressions describing the relationships among incident power, absorption coefficient and focal position are provided by a simple physical model based on the Fermat principle. Expressions for the absorption dependent critical power are also derived; these can play important roles in experimental and applied research on self-focusing-related nonlinear optical phenomena in absorbing media. Numerical results, based on the nonlinear wave equation—and which can predict experimental results perfectly—are also presented, and agree quantitatively with the analytical results proposed in this paper.

Numerical realization of the variational method for generating self-trapped beams.

Science.gov (United States)

Duque, Erick I; Lopez-Aguayo, Servando; Malomed, Boris A

2018-03-19

We introduce a numerical variational method based on the Rayleigh-Ritz optimization principle for predicting two-dimensional self-trapped beams in nonlinear media. This technique overcomes the limitation of the traditional variational approximation in performing analytical Lagrangian integration and differentiation. Approximate soliton solutions of a generalized nonlinear Schrödinger equation are obtained, demonstrating robustness of the beams of various types (fundamental, vortices, multipoles, azimuthons) in the course of their propagation. The algorithm offers possibilities to produce more sophisticated soliton profiles in general nonlinear models.

Numerical realization of the variational method for generating self-trapped beams

Science.gov (United States)

Duque, Erick I.; Lopez-Aguayo, Servando; Malomed, Boris A.

2018-03-01

We introduce a numerical variational method based on the Rayleigh-Ritz optimization principle for predicting two-dimensional self-trapped beams in nonlinear media. This technique overcomes the limitation of the traditional variational approximation in performing analytical Lagrangian integration and differentiation. Approximate soliton solutions of a generalized nonlinear Schr\\"odinger equation are obtained, demonstrating robustness of the beams of various types (fundamental, vortices, multipoles, azimuthons) in the course of their propagation. The algorithm offers possibilities to produce more sophisticated soliton profiles in general nonlinear models.

Numerical simulation of ammonium dinitramide (ADN)-based non-toxic aerospace propellant decomposition and combustion in a monopropellant thruster

International Nuclear Information System (INIS)

Zhang, Tao; Li, Guoxiu; Yu, Yusong; Sun, Zuoyu; Wang, Meng; Chen, Jun

2014-01-01

Highlights: • Decomposition and combustion process of ADN-based thruster are studied. • Distribution of droplets is obtained during the process of spray hit on wire mesh. • Two temperature models are adopted to describe the heat transfer in porous media. • The influences brought by different mass flux and porosity are studied. - Abstract: Ammonium dinitramide (ADN) monopropellant is currently the most promising among all ‘green propellants’. In this paper, the decomposition and combustion process of liquid ADN-based ternary mixtures for propulsion are numerically studied. The R–R distribution model is used to study the initial boundary conditions of droplet distribution resulting from spray hit on a wire mesh based on PDA experiment. To simulate the heat-transfer characteristics between the gas–solid phases, a two-temperature porous medium model in a catalytic bed is used. An 11-species and 7-reactions chemistry model is used to study the catalytic and combustion processes. The final distribution of temperature, pressure, and other kinds of material component concentrations are obtained using the ADN thruster. The results of simulation conducted in the present study are well agree with previous experimental data, and the demonstration of the ADN thruster confirms that a good steady-state operation is achieved. The effects of spray inlet mass flux and porosity on monopropellant thruster performance are analyzed. The numerical results further show that a larger inlet mass flux results in better thruster performance and a catalytic bed porosity value of 0.5 can exhibit the best thruster performance. These findings can serve as a key reference for designing and testing non-toxic aerospace monopropellant thrusters

Adaptive moving grid methods for two-phase flow in porous media

KAUST Repository

Dong, Hao; Qiao, Zhonghua; Sun, Shuyu; Tang, Tao

2014-01-01

In this paper, we present an application of the moving mesh method for approximating numerical solutions of the two-phase flow model in porous media. The numerical schemes combine a mixed finite element method and a finite volume method, which can

The impact of a state-sponsored mass media campaign on use of telephone quitline and web-based cessation services.

Science.gov (United States)

Duke, Jennifer C; Mann, Nathan; Davis, Kevin C; MacMonegle, Anna; Allen, Jane; Porter, Lauren

2014-12-24

Most US smokers do not use evidence-based interventions as part of their quit attempts. Quitlines and Web-based treatments may contribute to reductions in population-level tobacco use if successfully promoted. Currently, few states implement sustained media campaigns to promote services and increase adult smoking cessation. This study examines the effects of Florida's tobacco cessation media campaign and a nationally funded media campaign on telephone quitline and Web-based registrations for cessation services from November 2010 through September 2013. We conducted multivariable analyses of weekly media-market-level target rating points (TRPs) and weekly registrations for cessation services through the Florida Quitline (1-877-U-CAN-NOW) or its Web-based cessation service, Web Coach (www.quitnow.net/florida). During 35 months, 141,221 tobacco users registered for cessation services through the Florida Quitline, and 53,513 registered through Web Coach. An increase in 100 weekly TRPs was associated with an increase of 7 weekly Florida Quitline registrants (β = 6.8, P Web Coach registrants (β = 1.7, P = .003) in an average media market. An increase in TRPs affected registrants from multiple demographic subgroups similarly. When state and national media campaigns aired simultaneously, approximately one-fifth of Florida's Quitline registrants came from the nationally advertised portal (1-800-QUIT-NOW). Sustained, state-sponsored media can increase the number of registrants to telephone quitlines and Web-based cessation services. Federally funded media campaigns can further increase the reach of state-sponsored cessation services.

Numerical studies on soliton propagation in the dielectric media by the nonlinear Lorentz computational model

International Nuclear Information System (INIS)

Abe, H.; Okuda, H.

1994-06-01

Soliton propagation in the dielectric media has been simulated by using the nonlinear Lorentz computational model, which was recently developed to study the propagation of electromagnetic waves in a linear and a nonlinear dielectric. The model is constructed by combining a microscopic model used in the semi-classical approximation for dielectric media and the particle model developed for the plasma simulations. The carrier wave frequency is retained in the simulation so that not only the envelope of the soliton but also its phase can be followed in time. It is shown that the model may be useful for studying pulse propagation in the dielectric media

ANALISIS CATEGORY ADVERTISING EXPENDITURE DAN CONSUMER MEDIA HABIT DI MEDIA TELEVISI DAN MEDIA CETAK

Directory of Open Access Journals (Sweden)

Zifwen Zifwen

2011-08-01

Full Text Available Normal 0 false false false MicrosoftInternetExplorer4 The purpose of the study is to identify the category of advertising expenditure and media habit on media advertising, especially on television and print ad such as newspapers, magazines and tabloids. The Data were collected  from Nielsen Media Research (NMR data base from a number of cities in Indonesia, such as Jakarta,Surabaya, Bandung, Semarang, Surabaya, Yogyakarta, Bali, Medan,Palembang and Makassar. There are three different type of data used to acquire the secondary data for the study: (1  Telescope (data collected for rating analysis January 1st, 2005 to March 31st, 2005, (2 Print scope (data collected from the readership of magazines, tabloids and newspaper January 1st, 2004 to December 31st, 2004 and (3 Ad quest (data collected from advertising expenditure for all categories. The data were collected, calculated and analyzed from January 1st, 2002 to December 31st, 2004. The purpose of the study is to uncover the trend of advertising budget from all categories on the television and print ads, in order to describe the consumption tendency of the people within advertising media. Index analysis and Biplot were used to analyze the data. Based on the result of advertising expenditure analysis of data, showing that all categories were completely different in the utilization of the media for advertisement. Some categories used mix media to support their campaign and others used a single media. Characteristic of the categories were strongly involved in the decision making in way of choosing and using the advertising media. The result of consumer media analysis found that the people habit were completely different and unique in media consumption. Different of age, sex and social economic status can create a different habit in term of hobbies and desire within the channel, programme, newspaper, magazines and the tabloids. Finally, to create an effective and efficient advertising activity

School-Based Smoking Prevention with Media Literacy: A Pilot Study

Science.gov (United States)

Bier, Melinda C.; Schmidt, Spring J.; Shields, David; Zwarun, Lara; Sherblom, Stephen; Pulley, Cynthia; Rucker, Billy

2011-01-01

School-based tobacco prevention programs have had limited success reducing smoking rates in the long term. Media literacy programs offer an innovative vehicle for delivery of potentially more efficacious anti-tobacco education. However, these programs have been neither widely implemented nor well evaluated. We conducted a pre-post evaluation of a…

Least-squares collocation meshless approach for radiative heat transfer in absorbing and scattering media

Science.gov (United States)

Liu, L. H.; Tan, J. Y.

2007-02-01

A least-squares collocation meshless method is employed for solving the radiative heat transfer in absorbing, emitting and scattering media. The least-squares collocation meshless method for radiative transfer is based on the discrete ordinates equation. A moving least-squares approximation is applied to construct the trial functions. Except for the collocation points which are used to construct the trial functions, a number of auxiliary points are also adopted to form the total residuals of the problem. The least-squares technique is used to obtain the solution of the problem by minimizing the summation of residuals of all collocation and auxiliary points. Three numerical examples are studied to illustrate the performance of this new solution method. The numerical results are compared with the other benchmark approximate solutions. By comparison, the results show that the least-squares collocation meshless method is efficient, accurate and stable, and can be used for solving the radiative heat transfer in absorbing, emitting and scattering media.

Least-squares collocation meshless approach for radiative heat transfer in absorbing and scattering media

International Nuclear Information System (INIS)

Liu, L.H.; Tan, J.Y.

2007-01-01

A least-squares collocation meshless method is employed for solving the radiative heat transfer in absorbing, emitting and scattering media. The least-squares collocation meshless method for radiative transfer is based on the discrete ordinates equation. A moving least-squares approximation is applied to construct the trial functions. Except for the collocation points which are used to construct the trial functions, a number of auxiliary points are also adopted to form the total residuals of the problem. The least-squares technique is used to obtain the solution of the problem by minimizing the summation of residuals of all collocation and auxiliary points. Three numerical examples are studied to illustrate the performance of this new solution method. The numerical results are compared with the other benchmark approximate solutions. By comparison, the results show that the least-squares collocation meshless method is efficient, accurate and stable, and can be used for solving the radiative heat transfer in absorbing, emitting and scattering media

Elastic full waveform inversion based on the homogenization method: theoretical framework and 2-D numerical illustrations

Science.gov (United States)

Capdeville, Yann; Métivier, Ludovic

2018-05-01

Seismic imaging is an efficient tool to investigate the Earth interior. Many of the different imaging techniques currently used, including the so-called full waveform inversion (FWI), are based on limited frequency band data. Such data are not sensitive to the true earth model, but to a smooth version of it. This smooth version can be related to the true model by the homogenization technique. Homogenization for wave propagation in deterministic media with no scale separation, such as geological media, has been recently developed. With such an asymptotic theory, it is possible to compute an effective medium valid for a given frequency band such that effective waveforms and true waveforms are the same up to a controlled error. In this work we make the link between limited frequency band inversion, mainly FWI, and homogenization. We establish the relation between a true model and an FWI result model. This relation is important for a proper interpretation of FWI images. We numerically illustrate, in the 2-D case, that an FWI result is at best the homogenized version of the true model. Moreover, it appears that the homogenized FWI model is quite independent of the FWI parametrization, as long as it has enough degrees of freedom. In particular, inverting for the full elastic tensor is, in each of our tests, always a good choice. We show how the homogenization can help to understand FWI behaviour and help to improve its robustness and convergence by efficiently constraining the solution space of the inverse problem.

Percolation in Heterogeneous Media

International Nuclear Information System (INIS)

Vocka, Radim

1999-01-01

This work is a theoretical reflection on the problematic of the modeling of heterogeneous media, that is on the way of their simple representation conserving their characteristic features. Two particular problems are addressed in this thesis. Firstly, we study the transport in porous media, that is in a heterogeneous media which structure is quenched. A pore space is represented in a simple way - a pore is symbolized as a tube of a given length and a given diameter. The fact that the correlations in the distribution of pore sizes are taken into account by a construction of a hierarchical network makes possible the modeling of porous media with a porosity distributed over several length scales. The transport in the hierarchical network shows qualitatively different phenomena from those observed in simpler models. A comparison of numerical results with experimental data shows that the hierarchical network gives a good qualitative representation of the structure of real porous media. Secondly, we study a problem of the transport in a heterogeneous media which structure is evolving during the time. The models where the evolution of the structure is not influenced by the transport are studied in detail. These models present a phase transition of the same nature as that observed on the percolation networks. We propose a new theoretical description of this transition, and we express critical exponents describing the evolution of the conductivity as a function of fundamental exponents of percolation theory. (author) [fr

Assessment of Students’ Familiarity, Adoption, and Use of Social Media in Bahrain.

OpenAIRE

Paliktzoglou, V.; Giousmpasoglou, Charalampos; Marinakou, Evangelia

2016-01-01

Social media is used in many higher education institutions for educational purposes in numerous new and innovative ways. However, in Bahrain the number of higher education students who are aware of and use social media is not clear. It was therefore necessary to conduct an empirical study that would investigate the students’ use of social media in higher education in Bahrain. Moreover, the actual adoption of social media in everyday learning situations still remain underexplored, especially i...

Evidence and evidence gaps in the treatment of Eustachian tube dysfunction and otitis media

Science.gov (United States)

Teschner, Magnus

2016-01-01

Evidence-based medicine is an approach to medical treatment intended to optimize patient-oriented decision-making on the basis of empirically proven effectiveness. For this purpose, a classification system has been established to categorize studies – and hence therapy options – in respect of associated evidence according to defined criteria. The Eustachian tube connects the nasopharynx with the middle ear cavity. Its key function is to ensure middle ear ventilation. Compromised ventilation results in inflammatory middle ear disorders. Numerous evidence-based therapy options are available for the treatment of impaired middle ear ventilation and otitis media, the main therapeutic approach being antibiotic treatment. More recent procedures such as balloon dilation of the Eustachian tube have also shown initial success but must undergo further evaluation with regard to evidence. There is, as yet, no evidence for some of the other long-established procedures. Owing to the multitude of variables, the classification of evidence levels for various treatment approaches calls for highly diversified assessment. Numerous evidence-based studies are therefore necessary in order to evaluate the evidence pertaining to existing and future therapy solutions for impaired middle ear ventilation and otitis media. If this need is addressed, a wealth of implications can be expected for therapeutic approaches in the years to come. PMID:28025605

Teaching Electronic Literacy A Concepts-Based Approach for School Library Media Specialists

CERN Document Server

Craver, Kathleen W

1997-01-01

School library media specialists will find this concepts-based approach to teaching electronic literacy an indispensable basic tool for instructing students and teachers. It provides step-by-step instruction on how to find and evaluate needed information from electronic databases and the Internet, how to formulate successful electronic search strategies and retrieve relevant results, and how to interpret and critically analyze search results. The chapters contain a suggested lesson plan and sample assignments for the school library media specialist to use in teaching electronic literacy skills

Using Logarithmic Fuzzy Preference Programming To Prioritization Social Media Utilization Based On Tourists’ Perspective

Directory of Open Access Journals (Sweden)

Balouchi Mina

2015-06-01

Full Text Available The advent of Web 2.0 or social media technologies gives travelers a chance to access quickly and conveniently to a mass of travel-related information. This study investigates the importance of social media in travel process in three different phases (pre-visit, on site, post-visit from the perspective of Iranian travelers. It is worthwhile to know the level of influence of social media on respondents’ travel behavior. Logarithmic fuzzy preference programming methodology is used in this article to determine the importance of social media usage in each phase of travel process and its subcategories. Fuzzy analytic hierarchy process methodology, based on Chang’s Fuzzy Extent Analysis is also used for the data analysis, then the results of these two methods are presented for comparison and better understanding. The results of this study suggest that the most usage of social media is on pre-visit phase while post-visit has the least usage. This study shows that Iranian travelers use social media mainly to share experiences (post-visit phase, get help in different circumstances and gain travel advice.

Numerical simulations and mathematical models of flows in complex geometries

DEFF Research Database (Denmark)

Hernandez Garcia, Anier

The research work of the present thesis was mainly aimed at exploiting one of the strengths of the Lattice Boltzmann methods, namely, the ability to handle complicated geometries to accurately simulate flows in complex geometries. In this thesis, we perform a very detailed theoretical analysis...... and through the Chapman-Enskog multi-scale expansion technique the dependence of the kinetic viscosity on each scheme is investigated. Seeking for optimal numerical schemes to eciently simulate a wide range of complex flows a variant of the finite element, off-lattice Boltzmann method [5], which uses...... the characteristic based integration is also implemented. Using the latter scheme, numerical simulations are conducted in flows of different complexities: flow in a (real) porous network and turbulent flows in ducts with wall irregularities. From the simulations of flows in porous media driven by pressure gradients...

Well test analysis in fractured media

Energy Technology Data Exchange (ETDEWEB)

Karasaki, K.

1986-04-01

In this study the behavior of fracture systems under well test conditions and methods for analyzing well test data from fractured media are investigated. Several analytical models are developed to be used for analyzing well test data from fractured media. Numerical tools that may be used to simulate fluid flow in fractured media are also presented. Three types of composite models for constant flux tests are investigated. Several slug test models with different geometric conditions that may be present in fractured media are also investigated. A finite element model that can simulate transient fluid flow in fracture networks is used to study the behavior of various two-dimensional fracture systems under well test conditions. A mesh generator that can be used to model mass and heat flow in a fractured-porous media is presented. This model develops an explicit solution in the porous matrix as well as in the discrete fractures. Because the model does not require the assumptions of the conventional double porosity approach, it may be used to simulate cases where double porosity models fail.

A Randomized Crossover Study of Web-Based Media Literacy to Prevent Smoking

Science.gov (United States)

Shensa, Ariel; Phelps-Tschang, Jane; Miller, Elizabeth; Primack, Brian A.

2016-01-01

Feasibly implemented Web-based smoking media literacy (SML) programs have been associated with improving SML skills among adolescents. However, prior evaluations have generally had weak experimental designs. We aimed to examine program efficacy using a more rigorous crossover design. Seventy-two ninth grade students completed a Web-based SML…

A literature survey on numerical heat transfer

Science.gov (United States)

Shih, T. M.

1982-12-01

Technical papers in the area of numerical heat transfer published from 1977 through 1981 are reviewed. The journals surveyed include: (1) ASME Journal of Heat Transfer, (2) International Journal of Heat and Mass Transfer, (3) AIAA Journal, (4) Numerical Heat Transfer, (5) Computers and Fluids, (6) International Journal for Numerical Methods in Engineering, (7) SIAM Journal of Numerical Analysis, and (8) Journal of Computational Physics. This survey excludes experimental work in heat transfer and numerical schemes that are not applied to equations governing heat transfer phenomena. The research work is categorized into the following areas: (A) conduction, (B) boundary-layer flows, (C) momentum and heat transfer in cavities, (D) turbulent flows, (E) convection around cylinders and spheres or within annuli, (F) numerical convective instability, (G) radiation, (H) combustion, (I) plumes, jets, and wakes, (J) heat transfer in porous media, (K) boiling, condensation, and two-phase flows, (L) developing and fully developed channel flows, (M) combined heat and mass transfer, (N) applications, (O) comparison and properties of numerical schemes, and (P) body-fitted coordinates and nonuniform grids.

Media Ecology

Directory of Open Access Journals (Sweden)

Marina Ašković

2015-05-01

Full Text Available Does the trend in which electronic media are gradually becoming extension of human body have to move towards full enslavement of a human and his personality, or the same human will unpredictably, with the aid of his personal media literacy, exit the whirls of media and technological censorships? Personality crisis is closely related to the crisis of language no matter how contradicted to global ideology of transnational transhumanism it may seem. Considering the fact that recent media presentations of the world are based on commercialization of environmentalism, philosophical and aesthetic thought appears as an important subject of ecology. As media mediates, the scenery of civilized living increasingly becomes more appealing even though it derives from commercial and political background. Consequently, the future of humanity depends by large on the philosophy of media. Media have to truly ecologise returning the humanum to its essence making it into the extension of the natural world.

Study on the gain media with four energy level model using two dimensional FDTD method

Energy Technology Data Exchange (ETDEWEB)

Wu, Bo; Sun, Bingbing; Xue, Hui; Xiao, Feng [Key Laboratory of Intelligent Computing and Signal Processing, Anhui University, Hefei 230039 (China); Huang, Zhixiang, E-mail: zxhuang@ahu.edu.cn [Key Laboratory of Intelligent Computing and Signal Processing, Anhui University, Hefei 230039 (China); Wu, Xianliang, E-mail: xlwu@ahu.edu.cn [Key Laboratory of Intelligent Computing and Signal Processing, Anhui University, Hefei 230039 (China); Department of Physics and Electronic Engineering, Hefei Normal University, Hefei 230061 (China)

2013-08-15

A four energy level model is applied to the gain media, which shows possible application to the complex metamaterials system due to its amplification effect. The coupled equations named polarization equation, rate equations of electronic population and Maxwell's equations are used to describe the coupling between the atoms and electromagnetic wave. Population inversion and lasing threshold are investigated using numerical simulations based on a novel finite-difference time-domain (FDTD) treatment of the optical field. The validations of the method are also tested. The numerical results show the good agreement with the classic lasing theory. Our numerical model can be used as an efficient design tool for investigating novel physical phenomena for new laser devices.

Field-based dynamic light scattering microscopy: theory and numerical analysis.

Science.gov (United States)

Joo, Chulmin; de Boer, Johannes F

2013-11-01

We present a theoretical framework for field-based dynamic light scattering microscopy based on a spectral-domain optical coherence phase microscopy (SD-OCPM) platform. SD-OCPM is an interferometric microscope capable of quantitative measurement of amplitude and phase of scattered light with high phase stability. Field-based dynamic light scattering (F-DLS) analysis allows for direct evaluation of complex-valued field autocorrelation function and measurement of localized diffusive and directional dynamic properties of biological and material samples with high spatial resolution. In order to gain insight into the information provided by F-DLS microscopy, theoretical and numerical analyses are performed to evaluate the effect of numerical aperture of the imaging optics. We demonstrate that sharp focusing of fields affects the measured diffusive and transport velocity, which leads to smaller values for the dynamic properties in the sample. An approach for accurately determining the dynamic properties of the samples is discussed.

Media Pembelajaran Global Warming

OpenAIRE

Tham, Fikri Jufri; Liliana, Liliana; Purba, Kristo Radion

2016-01-01

Computer based learning media is one of the media has an important role in learning. Learning media will be attractive when packaged through interactive media , such as interactive media created in paper manufacture " instructional media global warming" . The advantage gained is that it can increase knowledge, generally educate people to be more concerned about the environment , and also can be a means of entertainment. This application is focused to learn about global warming and packaged in...

Impact of European Media Education Strategies on Russian Media Education Development

Science.gov (United States)

Mikhaleva, Galina V.

2015-01-01

The article attempts to examine the impact of European media education theories and approaches on Russian media education evolution basing on a comparative analysis of Russian and European media literacy promotion strategies in the historical context. This influence resulted in the appearance and development of socio-cultural models of media…

Selection and Evaluation of Media for Behavioral Health Interventions Employing Critical Media Analysis.

Science.gov (United States)

Wilson, Patrick A; Cherenack, Emily M; Jadwin-Cakmak, Laura; Harper, Gary W

2018-01-01

Although a growing number of psychosocial health promotion interventions use the critical analysis of media to facilitate behavior change, no specific guidelines exist to assist researchers and practitioners in the selection and evaluation of culturally relevant media stimuli for intervention development. Mobilizing Our Voices for Empowerment is a critical consciousness-based health enhancement intervention for HIV-positive Black young gay/bisexual men that employs the critical analysis of popular media. In the process of developing and testing this intervention, feedback on media stimuli was collected from youth advisory board members (n = 8), focus group participants (n = 19), intervention participants (n = 40), and intervention facilitators (n = 6). A thematic analysis of qualitative data resulted in the identification of four key attributes of media stimuli and participants' responses to media stimuli that are important to consider when selecting and evaluating media stimuli for use in behavioral health interventions employing the critical analysis of media: comprehension, relevance, emotionality, and action. These four attributes are defined and presented as a framework for evaluating media, and adaptable tools are provided based on this framework to guide researchers and practitioners in the selection and evaluation of media for similar interventions.

Numerical analyses on the effect of capillary condensation on gas diffusivities in porous media

Science.gov (United States)

Yoshimoto, Yuta; Hori, Takuma; Kinefuchi, Ikuya; Takagi, Shu

2017-11-01

We investigate the effect of capillary condensation on gas diffusivities in porous media composed of randomly packed spheres with moderate wettability. Lattice density functional theory simulations successfully reproduce realistic adsorption/desorption isotherms and provide fluid density distributions inside the porous media. We find that capillary condensations lead to the occlusion of narrow pores because they preferentially occur at confined spaces surrounded by the solid walls. Consequently, the characteristic lengths of the partially wet structures are larger than those of the corresponding dry structures with the same porosities. Subsequent gas diffusion simulations exploiting the mean-square displacement method indicate that while effective diffusion coefficients significantly decrease in the presence of partially condensed liquids, they are larger than those in the dry structures with the same porosities. Most importantly, we find that the porosity-to-tortuosity ratio, which is a crucial parameter that determines the effective diffusion coefficient, can be reasonably related to the porosity even for the partially wet porous media.

Tropospheric and ionospheric media calibrations based on global navigation satellite system observation data

Science.gov (United States)

Feltens, Joachim; Bellei, Gabriele; Springer, Tim; Kints, Mark V.; Zandbergen, René; Budnik, Frank; Schönemann, Erik

2018-06-01

Context: Calibration of radiometric tracking data for effects in the Earth atmosphere is a crucial element in the field of deep-space orbit determination (OD). The troposphere can induce propagation delays in the order of several meters, the ionosphere up to the meter level for X-band signals and up to tens of meters, in extreme cases, for L-band ones. The use of media calibrations based on Global Navigation Satellite Systems (GNSS) measurement data can improve the accuracy of the radiometric observations modelling and, as a consequence, the quality of orbit determination solutions. Aims: ESOC Flight Dynamics employs ranging, Doppler and delta-DOR (Delta-Differential One-Way Ranging) data for the orbit determination of interplanetary spacecraft. Currently, the media calibrations for troposphere and ionosphere are either computed based on empirical models or, under mission specific agreements, provided by external parties such as the Jet Propulsion Laboratory (JPL) in Pasadena, California. In order to become independent from external models and sources, decision fell to establish a new in-house internal service to create these media calibrations based on GNSS measurements recorded at the ESA tracking sites and processed in-house by the ESOC Navigation Support Office with comparable accuracy and quality. Methods: For its concept, the new service was designed to be as much as possible depending on own data and resources and as less as possible depending on external models and data. Dedicated robust and simple algorithms, well suited for operational use, were worked out for that task. This paper describes the approach built up to realize this new in-house internal media calibration service. Results: Test results collected during three months of running the new media calibrations in quasi-operational mode indicate that GNSS-based tropospheric corrections can remove systematic signatures from the Doppler observations and biases from the range ones. For the ionosphere, a

A novel dissolution media for testing drug release from a nanostructured polysaccharide-based colon specific drug delivery system: an approach to alternative colon media

Directory of Open Access Journals (Sweden)

Kotla NG

2016-03-01

Full Text Available Niranjan G Kotla,1,2 Sima Singh,1,3 Balaji Maddiboyina,4 Omprakash Sunnapu,2 Thomas J Webster5,6 1School of Pharmaceutical Sciences, Lovely Professional University, Punjab, India; 2Technologies for the Advancement of Science, Institute for Stem Cell Biology and Regenerative Medicine, Bangalore, Karnataka, India; 3Department of Pharmaceutical Sciences, Birla Institute of Technology, Mesra, Ranchi, Jharkhand, India; 4Department of Pharmaceutics, Vishwabharathi College of Pharmaceutical Sciences, Guntur, Andhra Pradesh, India; 5Department of Chemical Engineering, Northeastern University, Boston, MA, USA; 6Center of Excellence for Advanced Materials Research, King Abdulaziz University, Jeddah, Saudi Arabia Abstract: The aim of this study was to develop a novel microbially triggered and animal-sparing dissolution method for testing of nanorough polysaccharide-based micron granules for colonic drug delivery. In this method, probiotic cultures of bacteria present in the colonic region were prepared and added to the dissolution media and compared with the performance of conventional dissolution methodologies (such as media with rat cecal and human fecal media. In this study, the predominant species (such as Bacteroides, Bifidobacterium, Lactobacillus species, Eubacterium and Streptococcus were cultured in 12% w/v skimmed milk powder and 5% w/v grade “A” honey. Approximately 1010–1011 colony forming units m/L of probiotic culture was added to the dissolution media to test the drug release of polysaccharide-based formulations. A USP dissolution apparatus I/II using a gradient pH dissolution method was used to evaluate drug release from formulations meant for colonic drug delivery. Drug release of guar gum/Eudragit FS30D coated 5-fluorouracil granules was assessed under gastric and small intestine conditions within a simulated colonic environment involving fermentation testing with the probiotic culture. The results with the probiotic system were

Collapse of Incoherent Light Beams in Inertial Bulk Kerr Media

DEFF Research Database (Denmark)

Bang, Ole; Edmundson, Darran; Królikowski, Wieslaw

1999-01-01

We use the coherent density function theory to show that partially coherent beams are unstable and may collapse in inertial bulk Kerr media. The threshold power for collapse, and its dependence on the degree of coherence, is found analytically and checked-numerically. The internal dynamics of the...... of the walk-off modes is illustrated for collapsing and diffracting partially coherent beams.......We use the coherent density function theory to show that partially coherent beams are unstable and may collapse in inertial bulk Kerr media. The threshold power for collapse, and its dependence on the degree of coherence, is found analytically and checked-numerically. The internal dynamics...

Instructional Designers' Media Selection Practices for Distributed Problem-Based Learning Environments

Science.gov (United States)

Fells, Stephanie

2012-01-01

The design of online or distributed problem-based learning (dPBL) is a nascent, complex design problem. Instructional designers are challenged to effectively unite the constructivist principles of problem-based learning (PBL) with appropriate media in order to create quality dPBL environments. While computer-mediated communication (CMC) tools and…

Numerical simulation of distributed parameter processes

CERN Document Server

Colosi, Tiberiu; Unguresan, Mihaela-Ligia; Muresan, Vlad

2013-01-01

The present monograph defines, interprets and uses the matrix of partial derivatives of the state vector with applications for the study of some common categories of engineering. The book covers broad categories of processes that are formed by systems of partial derivative equations (PDEs), including systems of ordinary differential equations (ODEs). The work includes numerous applications specific to Systems Theory based on Mpdx, such as parallel, serial as well as feed-back connections for the processes defined by PDEs. For similar, more complex processes based on Mpdx with PDEs and ODEs as components, we have developed control schemes with PID effects for the propagation phenomena, in continuous media (spaces) or discontinuous ones (chemistry, power system, thermo-energetic) or in electro-mechanics (railway – traction) and so on. The monograph has a purely engineering focus and is intended for a target audience working in extremely diverse fields of application (propagation phenomena, diffusion, hydrodyn...

Event-Based Media Enrichment Using an Adaptive Probabilistic Hypergraph Model.

Science.gov (United States)

Liu, Xueliang; Wang, Meng; Yin, Bao-Cai; Huet, Benoit; Li, Xuelong

2015-11-01

Nowadays, with the continual development of digital capture technologies and social media services, a vast number of media documents are captured and shared online to help attendees record their experience during events. In this paper, we present a method combining semantic inference and multimodal analysis for automatically finding media content to illustrate events using an adaptive probabilistic hypergraph model. In this model, media items are taken as vertices in the weighted hypergraph and the task of enriching media to illustrate events is formulated as a ranking problem. In our method, each hyperedge is constructed using the K-nearest neighbors of a given media document. We also employ a probabilistic representation, which assigns each vertex to a hyperedge in a probabilistic way, to further exploit the correlation among media data. Furthermore, we optimize the hypergraph weights in a regularization framework, which is solved as a second-order cone problem. The approach is initiated by seed media and then used to rank the media documents using a transductive inference process. The results obtained from validating the approach on an event dataset collected from EventMedia demonstrate the effectiveness of the proposed approach.

A scalable delivery framework and a pricing model for streaming media with advertisements

Science.gov (United States)

Al-Hadrusi, Musab; Sarhan, Nabil J.

2008-01-01

This paper presents a delivery framework for streaming media with advertisements and an associated pricing model. The delivery model combines the benefits of periodic broadcasting and stream merging. The advertisements' revenues are used to subsidize the price of the media content. The pricing is determined based on the total ads' viewing time. Moreover, this paper presents an efficient ad allocation scheme and three modified scheduling policies that are well suited to the proposed delivery framework. Furthermore, we study the effectiveness of the delivery framework and various scheduling polices through extensive simulation in terms of numerous metrics, including customer defection probability, average number of ads viewed per client, price, arrival rate, profit, and revenue.

For Fit's Sake: A Norms-Based Approach to Healthy Behaviors Through Influence of Presumed Media Influence.

Science.gov (United States)

Ho, Shirley S; Lee, Edmund W J; Ng, Kaijie; Leong, Grace S H; Tham, Tiffany H M

2016-09-01

Based on the influence of presumed media influence (IPMI) model as the theoretical framework, this study examines how injunctive norms and personal norms mediate the influence of healthy lifestyle media messages on public intentions to engage in two types of healthy lifestyle behaviors-physical activity and healthy diet. Nationally representative data collected from 1,055 adults in Singapore demonstrate partial support for the key hypotheses that make up the extended IPMI model, highlighting the importance of a norms-based approach in health communication. Our results indicate that perceived media influence on others indirectly shaped public intentions to engage in healthy lifestyle behaviors through personal norms and attitude, providing partial theoretical support for the extended IPMI model. Practical implications for health communicators in designing health campaigns media messages to motivate the public to engage in healthy lifestyle are discussed.

Using Social Media to Promote Pre-Service Science Teachers' Practices of Socio-Scientific Issue (SSI) - Based Teaching

Science.gov (United States)

Pitiporntapin, Sasithep; Lankford, Deanna Marie

2015-01-01

This paper addresses using social media to promote pre-service science teachers' practices of Socio-Scientific Issue (SSI) based teaching in a science classroom setting. We designed our research in two phases. The first phase examined pre-service science teachers' perceptions about using social media to promote their SSI-based teaching. The…

A novel numerical approach for the solution of the problem of two-phase, immiscible flow in porous media: Application to LNAPL and DNAPL

KAUST Repository

Salama, Amgad

2012-06-17

The flow of two immiscible fluids in porous media is ubiquitous particularly in petroleum exploration and extraction. The displacement of one fluid by another immiscible with it represents a very important aspect in what is called enhanced oil recovery. Another example is related to the long-term sequestration of carbon dioxide, CO2 , in deep geologic formations. In this technique, supercritical CO2 is introduced into deep saline aquifer where it displaces the hosting fluid. Furthermore, very important classes of contaminants that are very slightly soluble in water and represent a huge concern if they get introduced to groundwater could basically be assumed immiscible. These are called light non-aqueous phase liquids (LNAPL) and dense non-aqueous phase liquids (DNAPL). All these applications necessitate that efficient algorithms be developed for the numerical solution of these problems. In this work we introduce the use of shifting matrices to numerically solving the problem of two-phase immiscible flows in the subsurface. We implement the cell-center finite difference method which discretizes the governing set of partial differential equations in conservative manner. Unlike traditional solution methodologies, which are based on performing the discretization on a generic cell and solve for all the cells within a loop, in this technique, the cell center information for all the cells are obtained all at once without loops using matrix oriented operations. This technique is significantly faster than the traditional looping algorithms, particularly for larger systems when coding using languages that require repeating interpretation each time a loop is called like Mat Lab, Python and the like. We apply this technique to the transport of LNAPL and DNAPL into a rectangular domain.

A novel dissolution media for testing drug release from a nanostructured polysaccharide-based colon specific drug delivery system: an approach to alternative colon media.

Science.gov (United States)

Kotla, Niranjan G; Singh, Sima; Maddiboyina, Balaji; Sunnapu, Omprakash; Webster, Thomas J

2016-01-01

The aim of this study was to develop a novel microbially triggered and animal-sparing dissolution method for testing of nanorough polysaccharide-based micron granules for colonic drug delivery. In this method, probiotic cultures of bacteria present in the colonic region were prepared and added to the dissolution media and compared with the performance of conventional dissolution methodologies (such as media with rat cecal and human fecal media). In this study, the predominant species (such as Bacteroides, Bifidobacterium, Lactobacillus species, Eubacterium and Streptococcus) were cultured in 12% w/v skimmed milk powder and 5% w/v grade "A" honey. Approximately 10(10)-10(11) colony forming units m/L of probiotic culture was added to the dissolution media to test the drug release of polysaccharide-based formulations. A USP dissolution apparatus I/II using a gradient pH dissolution method was used to evaluate drug release from formulations meant for colonic drug delivery. Drug release of guar gum/Eudragit FS30D coated 5-fluorouracil granules was assessed under gastric and small intestine conditions within a simulated colonic environment involving fermentation testing with the probiotic culture. The results with the probiotic system were comparable to those obtained from the rat cecal and human fecal-based fermentation model, thereby suggesting that a probiotic dissolution method can be successfully applied for drug release testing of any polysaccharide-based oral formulation meant for colonic delivery. As such, this study significantly adds to the nanostructured biomaterials' community by elucidating an easier assay for colonic drug delivery.

Improving estimates of subsurface gas transport in unsaturated fractured media using experimental Xe diffusion data and numerical methods

Science.gov (United States)

Ortiz, J. P.; Ortega, A. D.; Harp, D. R.; Boukhalfa, H.; Stauffer, P. H.

2017-12-01

Gas transport in unsaturated fractured media plays an important role in a variety of applications, including detection of underground nuclear explosions, transport from volatile contaminant plumes, shallow CO2 leakage from carbon sequestration sites, and methane leaks from hydraulic fracturing operations. Gas breakthrough times are highly sensitive to uncertainties associated with a variety of hydrogeologic parameters, including: rock type, fracture aperture, matrix permeability, porosity, and saturation. Furthermore, a couple simplifying assumptions are typically employed when representing fracture flow and transport. Aqueous phase transport is typically considered insignificant compared to gas phase transport in unsaturated fracture flow regimes, and an assumption of instantaneous dissolution/volatilization of radionuclide gas is commonly used to reduce computational expense. We conduct this research using a twofold approach that combines laboratory gas experimentation and numerical modeling to verify and refine these simplifying assumptions in our current models of gas transport. Using a gas diffusion cell, we are able to measure air pressure transmission through fractured tuff core samples while also measuring Xe gas breakthrough measured using a mass spectrometer. We can thus create synthetic barometric fluctuations akin to those observed in field tests and measure the associated gas flow through the fracture and matrix pore space for varying degrees of fluid saturation. We then attempt to reproduce the experimental results using numerical models in PLFOTRAN and FEHM codes to better understand the importance of different parameters and assumptions on gas transport. Our numerical approaches represent both single-phase gas flow with immobile water, as well as full multi-phase transport in order to test the validity of assuming immobile pore water. Our approaches also include the ability to simulate the reaction equilibrium kinetics of dissolution

Collaboration, Pedagogy, and Media: Short-Term Summer Programs Emphasize Project Based and Social Emotional Learning

Science.gov (United States)

Bowden, William R.

2015-01-01

Summer programs that experiment with combining media literacy and social-emotional learning can potentially affect students' academic performance. Based on a six-week program, working with rising eighth grade students in a low-income school district, this program allowed students to work on media projects while trying to develop stronger…

Procedural Media Representation

OpenAIRE

Henrysson, Anders

2002-01-01

We present a concept for using procedural techniques to represent media. Procedural methods allow us to represent digital media (2D images, 3D environments etc.) with very little information and to render it photo realistically. Since not all kind of content can be created procedurally, traditional media representations (bitmaps, polygons etc.) must be used as well. We have adopted an object-based media representation where an object can be represented either with a procedure or with its trad...

Use of Social Media for Professional Development by Health Care Professionals: A Cross-Sectional Web-Based Survey

Science.gov (United States)

2016-01-01

Background Social media can be used in health care settings to enhance professional networking and education; patient communication, care, and education; public health programs; organizational promotion; and research. Objective The aim of this study was to explore the use of social media networks for the purpose of professional development among health care professionals in Saudi Arabia using a purpose-designed Web-based survey. Methods A cross-sectional web-based survey was undertaken. A link to the survey was posted on the investigator’s personal social media accounts including Twitter, LinkedIn, and WhatsApp. Results A total of 231 health care professionals, who are generally social media users, participated in the study. Of these professionals, 70.6% (163/231) use social media for their professional development. The social media applications most frequently used, in the descending order, for professional development were Twitter, YouTube, Instagram, Facebook, Snapchat, and LinkedIn. The majority of respondents used social media for professional development irrespective of their age group, with the highest proportion seen in those aged 20-30 years. Social media were perceived as being most beneficial for professional development in terms of their impact on the domains of knowledge and problem solving and least helpful for enhancing clinical skills. Twitter was perceived as the most helpful type of social media for all domains listed. Respondents most frequently reported that social media were useful for professional development for the reasons of knowledge exchange and networking. Conclusions Social media are frequently used by health care professionals in Saudi Arabia for the purposes of professional development, with Twitter most frequently used for this purpose. These findings suggest that social media networks can be powerful tools for engaging health care professionals in their professional development. PMID:27731855

Use of Social Media for Professional Development by Health Care Professionals: A Cross-Sectional Web-Based Survey.

Science.gov (United States)

Alsobayel, Hana

2016-09-12

Social media can be used in health care settings to enhance professional networking and education; patient communication, care, and education; public health programs; organizational promotion; and research. The aim of this study was to explore the use of social media networks for the purpose of professional development among health care professionals in Saudi Arabia using a purpose-designed Web-based survey. A cross-sectional web-based survey was undertaken. A link to the survey was posted on the investigator's personal social media accounts including Twitter, LinkedIn, and WhatsApp. A total of 231 health care professionals, who are generally social media users, participated in the study. Of these professionals, 70.6% (163/231) use social media for their professional development. The social media applications most frequently used, in the descending order, for professional development were Twitter, YouTube, Instagram, Facebook, Snapchat, and LinkedIn. The majority of respondents used social media for professional development irrespective of their age group, with the highest proportion seen in those aged 20-30 years. Social media were perceived as being most beneficial for professional development in terms of their impact on the domains of knowledge and problem solving and least helpful for enhancing clinical skills. Twitter was perceived as the most helpful type of social media for all domains listed. Respondents most frequently reported that social media were useful for professional development for the reasons of knowledge exchange and networking. Social media are frequently used by health care professionals in Saudi Arabia for the purposes of professional development, with Twitter most frequently used for this purpose. These findings suggest that social media networks can be powerful tools for engaging health care professionals in their professional development.

Bedroom media: One risk factor for development.

Science.gov (United States)

Gentile, Douglas A; Berch, Olivia N; Choo, Hyekyung; Khoo, Angeline; Walsh, David A

2017-12-01

Mass media have numerous effects on children, ranging from influencing school performance to increased or reduced aggression. What we do not know, however, is how media availability in the bedroom moderates these effects. Although several researchers have suggested that bedroom media may influence outcomes by displacing other activities (the displacement hypothesis) or by changing the content of media consumed (the content hypothesis), these have rarely been tested directly. This study tested both hypotheses using several outcomes that are associated with bedroom media and some of the underlying mediating mechanisms. The hypotheses were tested using 3 longitudinal samples of varying methods, age, duration, and country. The results indicate that children who have bedroom media are likely to watch larger amounts of screen time which displaced important activities, such as reading and sleeping, which mediated later negative outcomes such as poor school performance. Bedroom media also influence risk for obesity and video game addiction. Children with bedroom media are also likely to be exposed to more media violence. The violent content increased normative beliefs about aggression, which increased physical aggression, providing support for the content hypothesis. This study demonstrates that media can have effects not just from what they show, but also because of what children are not exposed to. Bedroom media are therefore a robust risk factor for several aspects of child development. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Porous media fracturing dynamics: stepwise crack advancement and fluid pressure oscillations

Science.gov (United States)

Cao, Toan D.; Hussain, Fazle; Schrefler, Bernhard A.

2018-02-01

We present new results explaining why fracturing in saturated porous media is not smooth and continuous but is a distinct stepwise process concomitant with fluid pressure oscillations. All exact solutions and almost all numerical models yield smooth fracture advancement and fluid pressure evolution, while recent experimental results, mainly from the oil industry, observation from geophysics and a very few numerical results for the quasi-static case indeed reveal the stepwise phenomenon. We summarize first these new experiments and these few numerical solutions for the quasi-static case. Both mechanical loading and pressure driven fractures are considered because their behaviours differ in the direction of the pressure jumps. Then we explore stepwise crack tip advancement and pressure fluctuations in dynamic fracturing with a hydro-mechanical model of porous media based on the Hybrid Mixture Theory. Full dynamic analyses of examples dealing with both hydraulic fracturing and mechanical loading are presented. The stepwise fracture advancement is confirmed in the dynamic setting as well as in the pressure fluctuations, but there are substantial differences in the frequency contents of the pressure waves in the two loading cases. Comparison between the quasi-static and fully dynamic solutions reveals that the dynamic response gives much more information such as the type of pressure oscillations and related frequencies and should be applied whenever there is a doubt about inertia forces playing a role - the case in most fracturing events. In the absence of direct relevant dynamic tests on saturated media some experimental results on dynamic fracture in dry materials, a fast hydraulic fracturing test and observations from geophysics confirm qualitatively the obtained results such as the type of pressure oscillations and the substantial difference in the behaviour under the two loading cases.

GPU based numerical simulation of core shooting process

Directory of Open Access Journals (Sweden)

Yi-zhong Zhang

2017-11-01

Full Text Available Core shooting process is the most widely used technique to make sand cores and it plays an important role in the quality of sand cores. Although numerical simulation can hopefully optimize the core shooting process, research on numerical simulation of the core shooting process is very limited. Based on a two-fluid model (TFM and a kinetic-friction constitutive correlation, a program for 3D numerical simulation of the core shooting process has been developed and achieved good agreements with in-situ experiments. To match the needs of engineering applications, a graphics processing unit (GPU has also been used to improve the calculation efficiency. The parallel algorithm based on the Compute Unified Device Architecture (CUDA platform can significantly decrease computing time by multi-threaded GPU. In this work, the program accelerated by CUDA parallelization method was developed and the accuracy of the calculations was ensured by comparing with in-situ experimental results photographed by a high-speed camera. The design and optimization of the parallel algorithm were discussed. The simulation result of a sand core test-piece indicated the improvement of the calculation efficiency by GPU. The developed program has also been validated by in-situ experiments with a transparent core-box, a high-speed camera, and a pressure measuring system. The computing time of the parallel program was reduced by nearly 95% while the simulation result was still quite consistent with experimental data. The GPU parallelization method can successfully solve the problem of low computational efficiency of the 3D sand shooting simulation program, and thus the developed GPU program is appropriate for engineering applications.

Configuring Web-based Media for Communication in Dispersed Project Groups

DEFF Research Database (Denmark)

Scheepers, Rens; Nicolajsen, Hanne Westh

2006-01-01

meetings, telephone) are not always viable options. Instead, computer-based communication media such as email, project intranets and extranets become surrogate conduits for day-to-day project communication and exchange of project-related content. We examined the effect of different media configurations......We studied how project groups in a pharmaceutical organization communicate project content. The project groups are geographically dispersed, and operate in different time zones. In such project environments, synchronous or geographically bounded modes of communication channels (e.g., face to face...... on the nature of content created by the project groups. We found that configuration decisions, notably the responsibility for content provision and who had access to content, influenced medium choice and the nature of communication taking place via the medium. More substantive content resulted when content...

Exposure research going mobile: A smartphone-based measurement of media exposure to political information in a convergent media environment

NARCIS (Netherlands)

Ohme, J.; Albæk, E.; de Vreese, C.H.

2016-01-01

In today’s convergent media environment, media exposure becomes increasingly channel-independent and social media-bound, and media content is more frequently accessed on mobile devices. This calls for new approaches to measuring media exposure. This study applies an innovative approach to survey (n

Two compressible and immiscible flow in porous media: mathematical and numerical analysis

International Nuclear Information System (INIS)

Khalil, Z.

2010-01-01

The aim of this thesis is the study of Cauchy problem (existence of weak solutions) for three degenerate highly coupled parabolic systems modeling compressible immiscible flow in porous media. The motivation of this work is a benchmark of the GNR MoMaS, to study the impact of the gas flow due to the corrosion of ferrous materials in a radioactive waste storage site. This thesis is divided into three independent chapters. Firstly, we look at a problem modeling the flow of two immiscible phases and considering one phase is compressible and the other is incompressible (water/gas). Secondly, we consider the problem modeling two-compressible immiscible flow in porous media. An existence results for both problems established by a semi-discretization method. Finally, The fourth chapter is devoted to the construction and convergence of a multi-dimensional finite volume method (upwind scheme) for the gas-water model under the assumption that the gas density is a function of a global pressure. (author)

The relation between media promotions and service volume for a statewide tobacco quitline and a web-based cessation program

Directory of Open Access Journals (Sweden)

Schillo Barbara A

2011-12-01

Full Text Available Abstract Background This observational study assessed the relation between mass media campaigns and service volume for a statewide tobacco cessation quitline and stand-alone web-based cessation program. Methods Multivariate regression analysis was used to identify how weekly calls to a cessation quitline and weekly registrations to a web-based cessation program are related to levels of broadcast media, media campaigns, and media types, controlling for the impact of external and earned media events. Results There was a positive relation between weekly broadcast targeted rating points and the number of weekly calls to a cessation quitline and the number of weekly registrations to a web-based cessation program. Additionally, print secondhand smoke ads and online cessation ads were positively related to weekly quitline calls. Television and radio cessation ads and radio smoke-free law ads were positively related to web program registration levels. There was a positive relation between the number of web registrations and the number of calls to the cessation quitline, with increases in registrations to the web in 1 week corresponding to increases in calls to the quitline in the subsequent week. Web program registration levels were more highly influenced by earned media and other external events than were quitline call volumes. Conclusion Overall, broadcast advertising had a greater impact on registrations for the web program than calls to the quitline. Furthermore, registrations for the web program influenced calls to the quitline. These two findings suggest the evolving roles of web-based cessation programs and Internet-use practices should be considered when creating cessation programs and media campaigns to promote them. Additionally, because different types of media and campaigns were positively associated with calls to the quitline and web registrations, developing mass media campaigns that offer a variety of messages and communicate through

Propagation of hypergeometric Gaussian beams in strongly nonlocal nonlinear media

Science.gov (United States)

Tang, Bin; Bian, Lirong; Zhou, Xin; Chen, Kai

2018-01-01

Optical vortex beams have attracted lots of interest due to its potential application in image processing, optical trapping and optical communications, etc. In this work, we theoretically and numerically investigated the propagation properties of hypergeometric Gaussian (HyGG) beams in strongly nonlocal nonlinear media. Based on the Snyder-Mitchell model, analytical expressions for propagation of the HyGG beams in strongly nonlocal nonlinear media were obtained. The influence of input power and optical parameters on the evolutions of the beam width and radius of curvature is illustrated, respectively. The results show that the beam width and radius of curvature of the HyGG beams remain invariant, like a soliton when the input power is equal to the critical power. Otherwise, it varies periodically like a breather, which is the result of competition between the beam diffraction and nonlinearity of the medium.

Gas transport in porous media

CERN Document Server

Ho, Clifford K

2006-01-01

This book presents a compilation of state-of-the art studies on gas and vapor transport processes in porous and fractured media. A broad set of models and processes are presented, including advection/diffusion, the Dusty Gas Model, enhanced vapor diffusion, phase change, coupled processes, solid/vapor sorption, and vapor-pressure lowering. Numerous applications are also presented that illustrate these processes and models in current problems facing the scientific community. This book fills a gap in the general area of transport in porous and fractured media; an area that has historically been dominated by studies of liquid-phase flow and transport. This book identifies gas and vapor transport processes that may be important or dominant in various applications, and it exploits recent advances in computational modeling and experimental methods to present studies that distinguish the relative importance of various mechanisms of transport in complex media.

Fast optical detecting media based on semiconductor nanostructures for recording images obtained using charges of free photocarriers

International Nuclear Information System (INIS)

Kasherininov, P. G.; Tomasov, A. A.; Beregulin, E. V.

2011-01-01

Available published data on the properties of optical recording media based on semiconductor structures are reviewed. The principles of operation, structure, parameters, and the range of application for optical recording media based on MIS structures formed of photorefractive crystals with a thick layer of insulator and MIS structures with a liquid crystal as the insulator (the MIS LC modulators), as well as the effect of optical bistability in semiconductor structures (semiconductor MIS structures with nanodimensionally thin insulator (TI) layer, M(TI)S nanostructures). Special attention is paid to recording media based on the M(TI)S nanostructures promising for fast processing of highly informative images and to fabrication of optoelectronic correlators of images for noncoherent light.

The Arthur Interactive Media Study: Initial Findings From a Cross-Age Peer Mentoring and Digital Media-Based Character Development Program

Directory of Open Access Journals (Sweden)

Edmond P. Bowers

2016-05-01

Full Text Available In the midst of increasing emphasis on the inclusion of character education in both school and out-of-school time programs, digital technologies have become ubiquitous in these settings. Based on the potential of these technologies to enhance children’s character development, the Arthur Interactive Media (AIM study investigated if one specific unit or set of digital media-based activities engaged youth in discussions about character. First and second grade students were paired with 4th and 5th grade students, respectively, while engaging with an online interactive graphic novel (IGN about a character-relevant story based on the Arthur cartoon series. Teachers (n = 8 completed surveys about the AIM Unit, and conversations between cross-age peer dyads (n = 27 dyads during their engagement with the IGN were analyzed. Results indicated that teachers were very satisfied with the materials and reported that children were very engaged throughout. Analyses of children’s conversations indicated that children participated in character-relevant conversations involving humility, forgiveness, and future-mindedness while engaging with the IGN.

The Impact of an Art-Based Media Literacy Curriculum on the Leadership Self-Efficacy of Adolescent Girls

Science.gov (United States)

Keown, Emily Louise

2013-01-01

The purpose of this mixed methods study was to explore the impact of an arts-based media literacy program on the leadership efficacy of adolescent girls. The participants of this study were 19 middle school girls who participated in an after-school, arts-based media literacy curricula known as Project Girl. The group meetings were led by female…

Wave fields in real media wave propagation in anisotropic, anelastic, porous and electromagnetic media

CERN Document Server

Carcione, José M

2014-01-01

Authored by the internationally renowned José M. Carcione, Wave Fields in Real Media: Wave Propagation in Anisotropic, Anelastic, Porous and Electromagnetic Media examines the differences between an ideal and a real description of wave propagation, starting with the introduction of relevant stress-strain relations. The combination of this relation and the equations of momentum conservation lead to the equation of motion. The differential formulation is written in terms of memory variables, and Biot's theory is used to describe wave propagation in porous media. For each rheology, a plane-wave analysis is performed in order to understand the physics of wave propagation. This book contains a review of the main direct numerical methods for solving the equation of motion in the time and space domains. The emphasis is on geophysical applications for seismic exploration, but researchers in the fields of earthquake seismology, rock acoustics, and material science - including many branches of acoustics of fluids and ...

AR-KIO: Augmented Reality-based Application as Instructional Media on Input and Output Device Component.

Directory of Open Access Journals (Sweden)

Nur Hidayattur Rohmah

2017-12-01

Full Text Available The rapid technology development can be utilized in various fields, especially in education. For example, is augmented reality-based learning media. The learning media can be applied to all the subject matter, including the subject of input and output component devices. Based on the observations that already made, there are some problems such as there is no interactive learning media and limited props in the laboratory. Though the subject of input and output component devices require three-dimensional visualization, especially input output components that are difficult to find in the school environment. The purpose of this study is to determine the feasibility of instructional media applications that have been developed. The research method used is research development method. The tests conducted by media experts, content experts, users and smartphone devices with different specifications. Media expert testing using instruments that refer to aspects of the functionality of ISO 9126 with the percentage acquisition of 100%. Content expert testing using the instrument that refers aspects of learning design with the acquisition percentage of 88%. Meanwhile, user testing uses an instrument that refers to the usability aspect of ISO 9126 with a percentage gain of 83.4%. In addition, there are testing the software with android smartphone platform that has different specifications. The advantages of this application can run on a smartphone with minimum 512 MB RAM specs, Android OS Jelly Bean 4.3 and qHD screen resolution.

Seismic wave propagation in granular media

Science.gov (United States)

Tancredi, Gonzalo; López, Francisco; Gallot, Thomas; Ginares, Alejandro; Ortega, Henry; Sanchís, Johnny; Agriela, Adrián; Weatherley, Dion

2016-10-01

Asteroids and small bodies of the Solar System are thought to be agglomerates of irregular boulders, therefore cataloged as granular media. It is a consensus that many asteroids might be considered as rubble or gravel piles.Impacts on their surface could produce seismic waves which propagate in the interior of these bodies, thus causing modifications in the internal distribution of rocks and ejections of particles and dust, resulting in a cometary-type comma.We present experimental and numerical results on the study of propagation of impact-induced seismic waves in granular media, with special focus on behavior changes by increasing compression.For the experiment, we use an acrylic box filled with granular materials such as sand, gravel and glass spheres. Pressure inside the box is controlled by a movable side wall and measured with sensors. Impacts are created on the upper face of the box through a hole, ranging from free-falling spheres to gunshots. We put high-speed cameras outside the box to record the impact as well as piezoelectic sensors and accelerometers placed at several depths in the granular material to detect the seismic wave.Numerical simulations are performed with ESyS-Particle, a software that implements the Discrete Element Method. The experimental setting is reproduced in the numerical simulations using both individual spherical particles and agglomerates of spherical particles shaped as irregular boulders, according to rock models obtained with a 3D scanner. The numerical experiments also reproduces the force loading on one of the wall to vary the pressure inside the box.We are interested in the velocity, attenuation and energy transmission of the waves. These quantities are measured in the experiments and in the simulations. We study the dependance of these three parameters with characteristics like: impact speed, properties of the target material and the pressure in the media.These results are relevant to understand the outcomes of impacts in

An Exploration of Social Media Use among Multiply Minoritized LGBTQ Youth

Science.gov (United States)

Lucero, Alfie Leanna

2013-01-01

This study responds to a need for research in a fast-growing and significant area of study, that of exploring, understanding, and documenting the numerous ways that multiply marginalized LGBTQ youth between the ages of 14 and 17 use social media. The primary research question examined whether social media provide safe spaces for multiply…

On the the optical path length in various media

Science.gov (United States)

Hasbun, Javier

As light travels through a substance, the path it follows is a stationary path known as the optical path length (OPL) and Fermat's principle leads to Snell's law as well as the law of reflection. It is possible to apply the variational principle to obtain an Euler equation for the OPL. For a two layer media an analytic expression can be obtained that agrees with Snell's law. The concept is applied to more general media by solving the resulting Euler differential equation numerically. A Monte Carlo simulation method modified for the present systems is applied for comparison with the numerical results obtained by solving the OPL Euler equation. The approaches presented here are beneficial to enhance the understanding of light behavior in an undergraduate optics physics course.

The suite of analytical benchmarks for neutral particle transport in infinite isotropically scattering media

International Nuclear Information System (INIS)

Kornreich, D.E.; Ganapol, B.D.

1997-01-01

The linear Boltzmann equation for the transport of neutral particles is investigated with the objective of generating benchmark-quality evaluations of solutions for homogeneous infinite media. In all cases, the problems are stationary, of one energy group, and the scattering is isotropic. The solutions are generally obtained through the use of Fourier transform methods with the numerical inversions constructed from standard numerical techniques such as Gauss-Legendre quadrature, summation of infinite series, and convergence acceleration. Consideration of the suite of benchmarks in infinite homogeneous media begins with the standard one-dimensional problems: an isotropic point source, an isotropic planar source, and an isotropic infinite line source. The physical and mathematical relationships between these source configurations are investigated. The progression of complexity then leads to multidimensional problems with source configurations that also emit particles isotropically: the finite line source, the disk source, and the rectangular source. The scalar flux from the finite isotropic line and disk sources will have a two-dimensional spatial variation, whereas a finite rectangular source will have a three-dimensional variation in the scalar flux. Next, sources emitting particles anisotropically are considered. The most basic such source is the point beam giving rise to the Green's function, which is physically the most fundamental transport problem, yet may be constructed from the isotropic point source solution. Finally, the anisotropic plane and anisotropically emitting infinite line sources are considered. Thus, a firm theoretical and numerical base is established for the most fundamental neutral particle benchmarks in infinite homogeneous media

Renal function, nephrogenic systemic fibrosis and other adverse reactions associated with gadolinium-based contrast media.

Science.gov (United States)

Canga, Ana; Kislikova, Maria; Martínez-Gálvez, María; Arias, Mercedes; Fraga-Rivas, Patricia; Poyatos, Cecilio; de Francisco, Angel L M

2014-01-01

Nephrogenic systemic fibrosis is a fibrosing disorder that affects patients with impaired renal function and is associated with the administration of gadolinium-based contrast media used in MRI. Despite being in a group of drugs that were considered safe, report about this potentially serious adverse reaction was a turning point in the administration guidelines of these contrast media. There has been an attempt to establish safety parameters to identify patients with risk factors of renal failure. The close pharmacovigilance and strict observation of current regulations, with special attention being paid to the value of glomerular filtration, have reduced the published cases involving the use of gadolinium-based contrast media. In a meeting between radiologists and nephrologists we reviewed the most relevant aspects currently and recommendations for its prevention.

Studies of non-isothermal flow in saturated and partially saturated porous media

International Nuclear Information System (INIS)

Ho, C.K.; Maki, K.S.; Glass, R.J.

1993-01-01

Physical and numerical experiments have been performed to investigate the behavior of nonisothermal flow in two-dimensional saturated and partially saturated porous media. The physical experiments were performed to identify non-isothermal flow fields and temperature distributions in fully saturated, half-saturated, and residually saturated two-dimensional porous media with bottom heating and top cooling. Two counter-rotating liquid-phase convective cells were observed to develop in the saturated regions of all three cases. Gas-phase convection was also evidenced in the unsaturated regions of the partially saturated experiments. TOUGH2 numerical simulations of the saturated case were found to be strongly dependent on the assumed boundary conditions of the physical system. Models including heat losses through the boundaries of the test cell produced temperature and flow fields that were in better agreement with the observed temperature and flow fields than models that assumed insulated boundary conditions. A sensitivity analysis also showed that a reduction of the bulk permeability of the porous media in the numerical simulations depressed the effects of convection, flattening the temperature profiles across the test cell

Stable and high order accurate difference methods for the elastic wave equation in discontinuous media

KAUST Repository

Duru, Kenneth

2014-12-01

© 2014 Elsevier Inc. In this paper, we develop a stable and systematic procedure for numerical treatment of elastic waves in discontinuous and layered media. We consider both planar and curved interfaces where media parameters are allowed to be discontinuous. The key feature is the highly accurate and provably stable treatment of interfaces where media discontinuities arise. We discretize in space using high order accurate finite difference schemes that satisfy the summation by parts rule. Conditions at layer interfaces are imposed weakly using penalties. By deriving lower bounds of the penalty strength and constructing discrete energy estimates we prove time stability. We present numerical experiments in two space dimensions to illustrate the usefulness of the proposed method for simulations involving typical interface phenomena in elastic materials. The numerical experiments verify high order accuracy and time stability.

Synthesis of results of randomized controlled trials of contrast media

International Nuclear Information System (INIS)

Kinnison, M.L.; Powe, N.R.; Steinberg, E.P.

1988-01-01

The authors review 100 randomized controlled trials (RCTs) that examine the safety or efficacy of new low-osmolality contrast media (LOM) and focus on the 43 RCTs judged to be of the highest quality. These RCTs showed no consistent differences in nephrotoxicity between high- and low-osmolality contrast media. Certain cardiovascular parameters were altered less with low-osmolality agents during intracardiac injection, but the clinical significance of these differences in unclear. Heat and pain sensations occurred less often with low-osmolality contrast media. No differences were noted in the incidence of nausea, vomiting, urticaria, or bronchospasm. Even with numerous RCTs comparing these media, physicians still must make economically significant choices about contrast media without sufficient data about their relative safety

Flow in fissured porous media

International Nuclear Information System (INIS)

Stichel, Sabine

2014-01-01

The flow simulation in fissured porous media is of importance for hydro-geological applications like ground water contamination in the neighborhood of waste disposal sites, radioactive waste repositories, fossil fuel mining or underground CO2 storage facilities. The permeability within the fissures - that are preferred transport paths - could influence the flow profile. The anisotropic geometry and the excursive parameter changes produce enormous challenges to numerical methods. A low-dimensional approach is used to model then processes within the fissures, acceptable results were reached. Based on the properties of the fissure and flow parameters a criterion was defined that allows to judge whether the application of the low-dimensional approach is sufficient. A dimension-adapting approach is presented that allow the change tp a full-dimensional model according to the criterion.

Analysis of Plane-Parallel Electron Beam Propagation in Different Media by Numerical Simulation Methods

Science.gov (United States)

Miloichikova, I. A.; Bespalov, V. I.; Krasnykh, A. A.; Stuchebrov, S. G.; Cherepennikov, Yu. M.; Dusaev, R. R.

2018-04-01

Simulation by the Monte Carlo method is widely used to calculate the character of ionizing radiation interaction with substance. A wide variety of programs based on the given method allows users to choose the most suitable package for solving computational problems. In turn, it is important to know exactly restrictions of numerical systems to avoid gross errors. Results of estimation of the feasibility of application of the program PCLab (Computer Laboratory, version 9.9) for numerical simulation of the electron energy distribution absorbed in beryllium, aluminum, gold, and water for industrial, research, and clinical beams are presented. The data obtained using programs ITS and Geant4 being the most popular software packages for solving the given problems and the program PCLab are presented in the graphic form. A comparison and an analysis of the results obtained demonstrate the feasibility of application of the program PCLab for simulation of the absorbed energy distribution and dose of electrons in various materials for energies in the range 1-20 MeV.

Interactive learning media based on flash for basic electronic engineering development for SMK Negeri 1 Driyorejo - Gresik

Science.gov (United States)

Mandigo Anggana Raras, Gustav

2018-04-01

This research aims to produce a product in the form of flash based interactive learning media on a basic electronic engineering subject that reliable to be used and to know students’ responses about the media. The target of this research is X-TEI 1 class at SMK Negeri 1 Driyorejo – Gresik. The method used in this study is R&D that has been limited into seven stages only (1) potential and problems, (2) data collection, (3) product design, (4) product validation, (5) product revision, (6) field test, and (7) analysis and writing. The obtained result is interactive learning media named MELDASH. Validation process used to produce a valid interactive learning media. The result of media validation state that the interactive learning media has a 90.83% rating. Students’ responses to this interactive learning media is really good with 88.89% rating.

Parametric study of boiling heat transfer in porous media

International Nuclear Information System (INIS)

Shi, B.; Jones, B.G.; Pan, C.

1996-01-01

Detailed numerical modeling and parametric variation studies were conducted on boiling heat transfer processes in porous deposits with emphasis on applications associated with light water nuclear power reactor systems. The processes of boiling heat transfer in the porous corrosion deposits typically involve phase changes in finite volumetric regions in the porous media. The study examined such processes in two porous media configurations, without chimneys (homogeneous porous structures) and with chimneys (heterogeneous porous structures). A 1-D model and a 2-D model were developed to simulate two-phase flows with phase changes, without dry-out, inside the porous media for both structural configurations. For closure of the governing equations, an empirical correlation of the evaporation rate for phase changes inside the porous media was introduced. In addition, numerical algorithms were developed to solve the coupled nonlinear equations of mass, momentum, energy, capillary pressure, and evaporation rate. The distributions of temperature, thermodynamic saturation, liquid pressure, vapor pressure, liquid velocity, and vapor velocity were predicted. Furthermore, the effects of heat flux, system pressure, porosity, particle diameter, chimney population density, chimney radius, and crud thickness on the all superheat, critical heat flux, and minimum saturation were examined. The predictions were found to be in good agreement with the available experimental results

Exposure Research Going Mobile: A Smartphone-Based Measurement of Media Exposure to Political Information in a Convergent Media Environment

DEFF Research Database (Denmark)

Ohme, J.; Albaek, E.; H. de Vreese, C.

2016-01-01

platform modes. The study furthermore confirms limitations of mere usage time measurements of social media platforms in effects research and explores a range of actual content types that citizens encounter in social networks. It recommends more frequent use of mobile exposure measurements and argues...... for a content-related assessment of social media use in effects research. © 2016 Taylor & Francis.......In today’s convergent media environment, media exposure becomes increasingly channel-independent and social media-bound, and media content is more frequently accessed on mobile devices. This calls for new approaches to measuring media exposure. This study applies an innovative approach to survey (n...

Experimental and numerical investigations on freeze-drying of porous media with prebuilt porosity

Science.gov (United States)

Wang, Wei; Yang, Jing; Hu, Dapeng; Pan, Yanqiu; Wang, Shihao; Chen, Guohua

2018-05-01

Freeze-drying of initially porous frozen material was investigated aimed at improving the process economics by reducing drying time and raising productivity. Experimental results showed that freeze-drying can be significantly enhanced by the frozen material with prebuilt porosity, and about 31% of drying time can be saved compared with the conventionally solid frozen material under the tested operating conditions. A multiphase transport model was formulated based on the local mass non-equilibrium assumption. Numerical results showed excellent agreements between measured and predicted drying curves. Analyses of saturation and temperature profiles displayed that volumetric sublimation-desorption can occur for the initially porous frozen material.

Numerical solution of modified differential equations based on symmetry preservation.

Science.gov (United States)

Ozbenli, Ersin; Vedula, Prakash

2017-12-01

In this paper, we propose a method to construct invariant finite-difference schemes for solution of partial differential equations (PDEs) via consideration of modified forms of the underlying PDEs. The invariant schemes, which preserve Lie symmetries, are obtained based on the method of equivariant moving frames. While it is often difficult to construct invariant numerical schemes for PDEs due to complicated symmetry groups associated with cumbersome discrete variable transformations, we note that symmetries associated with more convenient transformations can often be obtained by appropriately modifying the original PDEs. In some cases, modifications to the original PDEs are also found to be useful in order to avoid trivial solutions that might arise from particular selections of moving frames. In our proposed method, modified forms of PDEs can be obtained either by addition of perturbation terms to the original PDEs or through defect correction procedures. These additional terms, whose primary purpose is to enable symmetries with more convenient transformations, are then removed from the system by considering moving frames for which these specific terms go to zero. Further, we explore selection of appropriate moving frames that result in improvement in accuracy of invariant numerical schemes based on modified PDEs. The proposed method is tested using the linear advection equation (in one- and two-dimensions) and the inviscid Burgers' equation. Results obtained for these tests cases indicate that numerical schemes derived from the proposed method perform significantly better than existing schemes not only by virtue of improvement in numerical accuracy but also due to preservation of qualitative properties or symmetries of the underlying differential equations.

The paradoxical moderating effect of body image investment on the impact of weight-based derogatory media.

Science.gov (United States)

Boersma, Katelyn E; Jarry, Josée L

2013-03-01

Weight-based derogatory media consist of derogation of celebrities for failing to meet the thin ideal. This study examined the impact of weight-based derogatory media on women's body satisfaction, appearance self-esteem, fear of negative appearance evaluation, and negative affect. Female undergraduates (N=240) were exposed to either tabloid-style pictures and articles derogating average size celebrities for gaining weight, or to the same images accompanied by neutral information. Women in the derogation condition reported greater fear of negative appearance evaluation than did women in the neutral media condition. Contrary to predictions, women low in maladaptive body image investment reported lower body satisfaction and appearance self-esteem in the derogatory media condition than they did in the neutral condition, while women high in maladaptive investment did not differ across conditions. Highly invested women's unexpected reaction may be understood as a defence against a threat to a valued domain of the self. Copyright © 2012 Elsevier Ltd. All rights reserved.

Effects of a brief school-based media literacy intervention on digital media use in adolescents: cluster randomized controlled trial.

Science.gov (United States)

Walther, Birte; Hanewinkel, Reiner; Morgenstern, Matthis

2014-09-01

The aim of this study was to evaluate the effects of a four-session school-based media literacy curriculum on adolescent computer gaming and Internet use behavior. The study comprised a cluster randomized controlled trial with three assessments (baseline, posttest, and 12-month follow-up). At baseline, a total of 2,303 sixth and seventh grade adolescents from 27 secondary schools were assessed. Of these, 1,843 (80%) could be reached at all three assessments (Mage=12.0 years; SD=0.83). Students of the intervention group received the media literacy program Vernetzte www.Welten ("Connected www.Worlds ") implemented by trained teachers during class time. The control group attended regular class. Main outcome measures were adolescents' computer gaming and Internet use: days per month, hours per day, and addictive use patterns. Parental media monitoring and rules at home were assessed as secondary outcomes. Results of multilevel growth-curve models revealed a significant intervention effect in terms of a lower increase in self-reported gaming frequency (β = -1.10 [95% CI -2.06, -0.13]), gaming time (β = -0.27 [95% CI -0.40, -0.14]), and proportion of excessive gamers (AOR=0.21 [95% CI 0.08, 0.57]) in the intervention group. There were also significant group-time interactions for the addictive gaming scale (β=-0.08 [95% CI -0.12, -0.04]), and the Internet Addiction Scale (β = -0.06 [95% CI -0.10, -0.01]). No effect was found for days and hours of Internet use or parental media behavior. The study shows that the program Vernetzte www.Welten can influence adolescents' media use behavior. Future research should address mediating and moderating variables of program effects.

ARS-Media for Excel: A Spreadsheet Tool for Calculating Media Recipes Based on Ion-Specific Constraints.

Science.gov (United States)

Niedz, Randall P

2016-01-01

ARS-Media for Excel is an ion solution calculator that uses "Microsoft Excel" to generate recipes of salts for complex ion mixtures specified by the user. Generating salt combinations (recipes) that result in pre-specified target ion values is a linear programming problem. Excel's Solver add-on solves the linear programming equation to generate a recipe. Calculating a mixture of salts to generate exact solutions of complex ionic mixtures is required for at least 2 types of problems- 1) formulating relevant ecological/biological ionic solutions such as those from a specific lake, soil, cell, tissue, or organ and, 2) designing ion confounding-free experiments to determine ion-specific effects where ions are treated as statistical factors. Using ARS-Media for Excel to solve these two problems is illustrated by 1) exactly reconstructing a soil solution representative of a loamy agricultural soil and, 2) constructing an ion-based experiment to determine the effects of substituting Na+ for K+ on the growth of a Valencia sweet orange nonembryogenic cell line.

ARS-Media for Excel: A Spreadsheet Tool for Calculating Media Recipes Based on Ion-Specific Constraints

Science.gov (United States)

Niedz, Randall P.

2016-01-01

ARS-Media for Excel is an ion solution calculator that uses “Microsoft Excel” to generate recipes of salts for complex ion mixtures specified by the user. Generating salt combinations (recipes) that result in pre-specified target ion values is a linear programming problem. Excel’s Solver add-on solves the linear programming equation to generate a recipe. Calculating a mixture of salts to generate exact solutions of complex ionic mixtures is required for at least 2 types of problems– 1) formulating relevant ecological/biological ionic solutions such as those from a specific lake, soil, cell, tissue, or organ and, 2) designing ion confounding-free experiments to determine ion-specific effects where ions are treated as statistical factors. Using ARS-Media for Excel to solve these two problems is illustrated by 1) exactly reconstructing a soil solution representative of a loamy agricultural soil and, 2) constructing an ion-based experiment to determine the effects of substituting Na+ for K+ on the growth of a Valencia sweet orange nonembryogenic cell line. PMID:27812202

Effect of Pore Size and Pore Connectivity on Unidirectional Capillary Penetration Kinetics in 3-D Porous Media using Direct Numerical Simulation

Science.gov (United States)

Fu, An; Palakurthi, Nikhil; Konangi, Santosh; Comer, Ken; Jog, Milind

2017-11-01

The physics of capillary flow is used widely in multiple fields. Lucas-Washburn equation is developed by using a single pore-sized capillary tube with continuous pore connection. Although this equation has been extended to describe the penetration kinetics into porous medium, multiple studies have indicated L-W does not accurately predict flow patterns in real porous media. In this study, the penetration kinetics including the effect of pore size and pore connectivity will be closely examined since they are expected to be the key factors effecting the penetration process. The Liquid wicking process is studied from a converging and diverging capillary tube to the complex virtual 3-D porous structures with Direct Numerical Simulation (DNS) using the Volume-Of-Fluid (VOF) method within the OpenFOAM CFD Solver. Additionally Porous Medium properties such as Permeability (k) , Tortuosity (τ) will be also analyzed.

An acoustic wave equation for pure P wave in 2D TTI media

KAUST Repository

Zhan, Ge; Pestana, Reynam C.; Stoffa, Paul L.

2011-01-01

In this paper, a pure P wave equation for an acoustic 2D TTI media is derived. Compared with conventional TTI coupled equations, the resulting equation is unconditionally stable due to the complete isolation of the SV wave mode. To avoid numerical dispersion and produce high quality images, the rapid expansion method REM is employed for numerical implementation. Synthetic results validate the proposed equation and show that it is a stable algorithm for modeling and reverse time migration RTM in a TTI media for any anisotropic parameter values. © 2011 Society of Exploration Geophysicists.

Optimal design of a composite space shield based on numerical simulations

International Nuclear Information System (INIS)

Son, Byung Jin; Yoo, Jeong Hoon; Lee, Min Hyung

2015-01-01

In this study, optimal design of a stuffed Whipple shield is proposed by using numerical simulations and new penetration criterion. The target model was selected based on the shield model used in the Columbus module of the international space station. Because experimental results can be obtained only in the low velocity region below 7 km/s, it is required to derive the Ballistic limit curve (BLC) in the high velocity region above 7 km/s by numerical simulation. AUTODYN-2D, the commercial hydro-code package, was used to simulate the nonlinear transient analysis for the hypervelocity impact. The Smoothed particle hydrodynamics (SPH) method was applied to projectile and bumper modeling to represent the debris cloud generated after the impact. Numerical simulation model and selected material properties were validated through a quantitative comparison between numerical and experimental results. A new criterion to determine whether the penetration occurs or not is proposed from kinetic energy analysis by numerical simulation in the velocity region over 7 km/s. The parameter optimization process was performed to improve the protection ability at a specific condition through the Design of experiment (DOE) method and the Response surface methodology (RSM). The performance of the proposed optimal design was numerically verified.

How does the mass media report and interpret radiation data? The results of media content analysis

Energy Technology Data Exchange (ETDEWEB)

Perko, T. [Belgian Nuclear Research Centre SCK.CEN, Institute for Environment Health and Safety (Belgium); Cantone, M.C. [University of Milano, Faculty of Medicine (Italy); Tomkiv, Y. [Norwegian University of Life Sciences (Norway); Prezelj, I. [University of Ljubljana, Faculty of Social Sciences (Slovenia); Gallego, E. [Universidad Politecnica de Madrid (Spain); Melekhova, E. [Russian Academy of Sciences in Moscow (Russian Federation)

2014-07-01

In communication with the general population, experts often provide quantitative information related to ionizing radiation, expressed with different units of radioactivity. However, quantitative information about radiation risks may be meaningful only to people who have the ability to comprehend basic numerical concepts and possess knowledge related to radiation. Thus, the media, as a bridge between experts and the general population, has to 'translate' quantitative information into a qualitative one. How successful and accurate are the mass media in this transformation of scientific results into publicly understandable information? Our research investigates media reporting on the concept of ionizing radiation in a case of nuclear emergencies. The presentation is focused on summarizing the 'lessons learned' from the use of radiation data in media reporting about the Fukushima nuclear accident. The in-depth media content analysis was conducted in twelve quality newspapers in Belgium, Slovenia, Italy, Spain, Norway and Russia using the same scientific methodology and analyzing the same time period. Preliminary results identified miss concepts of radiation data by media and even within emergency responders and decision makers. The research is a result of FP7 project Innovative integrated tools and platforms for radiological emergency preparedness and post-accident response in Europe - PREPARE and upgraded with a Russian experience. Document available in abstract form only. (authors)

A new media optimizer based on the mean-variance model

Directory of Open Access Journals (Sweden)

Pedro Jesus Fernandez

2007-01-01

Full Text Available In the financial markets, there is a well established portfolio optimization model called generalized mean-variance model (or generalized Markowitz model. This model considers that a typical investor, while expecting returns to be high, also expects returns to be as certain as possible. In this paper we introduce a new media optimization system based on the mean-variance model, a novel approach in media planning. After presenting the model in its full generality, we discuss possible advantages of the mean-variance paradigm, such as its flexibility in modeling the optimization problem, its ability of dealing with many media performance indices - satisfying most of the media plan needs - and, most important, the property of diversifying the media portfolios in a natural way, without the need to set up ad hoc constraints to enforce diversification.No mercado financeiro, existem modelos de otimização de portfólios já bem estabelecidos, denominados modelos de média-variância generalizados, ou modelos de Markowitz generalizados. Este modelo considera que um investidor típico, enquanto espera altos retornos, espera também que estes retornos sejam tão certos quanto possível. Neste artigo introduzimos um novo sistema otimizador de mídia baseado no modelo de média-variância, uma abordagem inovadora na área de planejamento de mídia. Após apresentar o modelo em sua máxima generalidade, discutimos possíveis vantagens do paradigma de média-variância, como sua flexibilidade na modelagem do problema de otimização, sua habilidade de lidar com vários índices de performance - satisfazendo a maioria dos requisitos de planejamento - e, o mais importante, a propriedade de diversificar os portfólios de mídia de uma forma natural, sem a necessidade de estipular restrições ad hoc para forçar a diversificação.

The Circulation of Scientific Articles in the Sphere of Web-Based Media: Citation Practices, Communities of Interests and Local Ties.

Science.gov (United States)

Lefebvre, Muriel; Renard, Julie

2016-01-01

On 5th December 2012, a scientific article reviewing a change in the feeding behaviour of the European catfish, one of the largest freshwater fish, was published in the American scientific journal, PLOS ONE, an open access journal, which also allows the mass publication of pictures and videos. Within a few days following the publication of this article, it was relayed by numerous web sites and generated a media craze. In this paper, we analyse the circulation of this scientific information in the sphere of Web-based media during the two months following its publication, by revealing the citation mechanisms of the original article and the logic of the Internet users participating in its diffusion. In addition, since the circulation of its informational content travelled beyond linguistic and geographical boundaries, we chose to compare the citation modalities and intertextual relationships of documents in the three countries where the article spread the most widely, namely: France, the United States and Great Britain. Even though our study shows that the media circulation of scientific papers operates in a traditional way, the intertextual analysis underlines the grand variety of participants (such as journalists, non-scientists, fishermen, technology enthusiasts and Internet users) involved in the diffusion of this information, each of them mobilizing different intertextual strategies, according to their various targets. They all transformed, reformulated and appropriated the scientific information according to their own, unique interests. This study also emphasizes the importance of journalistic websites as opinion relays. They were the first diffusers involved in spreading the information but this role was rarely acknowledged by the Internet users - through citations, for example. In contrast, we observed that amateurs' communities (communities of practices and communities of interest of fishermen or of buzz fans), which only became involved in a second temporal

Comparison of NMR simulations of porous media derived from analytical and voxelized representations.

Science.gov (United States)

Jin, Guodong; Torres-Verdín, Carlos; Toumelin, Emmanuel

2009-10-01

We develop and compare two formulations of the random-walk method, grain-based and voxel-based, to simulate the nuclear-magnetic-resonance (NMR) response of fluids contained in various models of porous media. The grain-based approach uses a spherical grain pack as input, where the solid surface is analytically defined without an approximation. In the voxel-based approach, the input is a computer-tomography or computer-generated image of reconstructed porous media. Implementation of the two approaches is largely the same, except for the representation of porous media. For comparison, both approaches are applied to various analytical and digitized models of porous media: isolated spherical pore, simple cubic packing of spheres, and random packings of monodisperse and polydisperse spheres. We find that spin magnetization decays much faster in the digitized models than in their analytical counterparts. The difference in decay rate relates to the overestimation of surface area due to the discretization of the sample; it cannot be eliminated even if the voxel size decreases. However, once considering the effect of surface-area increase in the simulation of surface relaxation, good quantitative agreement is found between the two approaches. Different grain or pore shapes entail different rates of increase of surface area, whereupon we emphasize that the value of the "surface-area-corrected" coefficient may not be universal. Using an example of X-ray-CT image of Fontainebleau rock sample, we show that voxel size has a significant effect on the calculated surface area and, therefore, on the numerically simulated magnetization response.

Pure Quasi-P-wave calculation in transversely isotropic media using a hybrid method

KAUST Repository

Wu, Zedong

2018-04-12

The acoustic approximation for anisotropic media is widely used in current industry imaging and inversion algorithms mainly because P-waves constitute the majority of the energy recorded in seismic exploration. The resulting acoustic formulas tend to be simpler, resulting in more efficient implementations, and depend on fewer medium parameters. However, conventional solutions of the acoustic wave equation with higher-order derivatives suffer from shear wave artifacts. Thus, we derive a new acoustic wave equation for wave propagation in transversely isotropic (TI) media, which is based on a partially separable approximation of the dispersion relation for TI media and free of shear wave artifacts. Even though our resulting equation is not a partial differential equation, it is still a linear equation. Thus, we propose to implement this equation efficiently by combining the finite difference approximation with spectral evaluation of the space-independent parts. The resulting algorithm provides solutions without the constrain of ε ≥ δ. Numerical tests demonstrate the effectiveness of the approach.

Pure Quasi-P-wave calculation in transversely isotropic media using a hybrid method

KAUST Repository

Wu, Zedong; Liu, Hongwei; Alkhalifah, Tariq Ali

2018-01-01

The acoustic approximation for anisotropic media is widely used in current industry imaging and inversion algorithms mainly because P-waves constitute the majority of the energy recorded in seismic exploration. The resulting acoustic formulas tend to be simpler, resulting in more efficient implementations, and depend on fewer medium parameters. However, conventional solutions of the acoustic wave equation with higher-order derivatives suffer from shear wave artifacts. Thus, we derive a new acoustic wave equation for wave propagation in transversely isotropic (TI) media, which is based on a partially separable approximation of the dispersion relation for TI media and free of shear wave artifacts. Even though our resulting equation is not a partial differential equation, it is still a linear equation. Thus, we propose to implement this equation efficiently by combining the finite difference approximation with spectral evaluation of the space-independent parts. The resulting algorithm provides solutions without the constrain of ε ≥ δ. Numerical tests demonstrate the effectiveness of the approach.

Multiphase flow in porous media using CFD

DEFF Research Database (Denmark)

Hemmingsen, Casper Schytte; Walther, Jens Honore

. This approach is widely used for single phase flow, but not for multiphase flow in porous media. This might be due to the complexity of introducing relative permeability and capillary pressure in the CFD solver.The introduction of relative permeability and capillary pressure may cause numerical instabilities...

Stability Analysis of Algebraic Reconstruction for Immersed Boundary Methods with Application in Flow and Transport in Porous Media

Science.gov (United States)

Yousefzadeh, M.; Battiato, I.

2017-12-01

Flow and reactive transport problems in porous media often involve complex geometries with stationary or evolving boundaries due to absorption and dissolution processes. Grid based methods (e.g. finite volume, finite element, etc.) are a vital tool for studying these problems. Yet, implementing these methods requires one to answer a very first question of what type of grid is to be used. Among different possible answers, Cartesian grids are one of the most attractive options as they possess simple discretization stencil and are usually straightforward to generate at roughly no computational cost. The Immersed Boundary Method, a Cartesian based methodology, maintains most of the useful features of the structured grids while exhibiting a high-level resilience in dealing with complex geometries. These features make it increasingly more attractive to model transport in evolving porous media as the cost of grid generation reduces greatly. Yet, stability issues and severe time-step restriction due to explicit-time implementation combined with limited studies on the implementation of Neumann (constant flux) and linear and non-linear Robin (e.g. reaction) boundary conditions (BCs) have significantly limited the applicability of IBMs to transport in porous media. We have developed an implicit IBM capable of handling all types of BCs and addressed some numerical issues, including unconditional stability criteria, compactness and reduction of spurious oscillations near the immersed boundary. We tested the method for several transport and flow scenarios, including dissolution processes in porous media, and demonstrate its capabilities. Successful validation against both experimental and numerical data has been carried out.

Experimental and numerical investigations on flame stability of methane/air mixtures in mesoscale combustors filled with fibrous porous media

International Nuclear Information System (INIS)

Liu, Yi; Ning, Daoguan; Fan, Aiwu; Yao, Hong

2016-01-01

Highlights: • Flame stability in mesoscale channels with fibrous porous media was investigated. • Standing combustion waves were observed in the channels of 6-mm and 5-mm diameter. • The standing combustion wave was not observed in the channel with a diameter of 4 mm. • Flame velocity was inversely proportional to equivalence ratio and channel diameter. • A sharp drop in the efficiency was seen for the 4-mm channel due to wall quenching. - Abstract: Flame stability of methane/air mixtures in mesoscale channels with different diameters (6 mm, 5 mm and 4 mm) filled with fibrous porous media was experimentally investigated. Standing combustion waves (namely, stationary flame) are observed under low inlet velocity and high equivalence ratio conditions. Moreover, the standing wave regime becomes narrower as the channel diameter is reduced from 6 mm to 5 mm and vanishes for the 4-mm channel. For a fixed equivalence ratio, the flame length becomes shorter at a smaller channel or a less inlet velocity. Regarding the downstream propagating wave, its propagation velocity increases with the decrease of channel diameter. Splitting flame appears at large inlet velocities. Besides, at low equivalence ratios, the downstream propagating flames grow into small flame balls and can survive until the channel exit. Numerical results demonstrate that for a smaller channel, although the total heat loss rate is reduced, its heat loss ratio is increased, which leads to a lower wall temperature level and the flame is quenched out near the wall. The combustion efficiency is decreased significantly for the 4-mm channel due to fuel leakage from the near-wall “dead space”.

The Media Mixer

DEFF Research Database (Denmark)

Vestergaard, Vitus; Mortensen, Christian Hviid

2011-01-01

content. The media content is created by the user in the museum's physical environment, but it can be mixed with material from web archives. It is the intention that the users learn about media through participatory and creative processes with media where the borders between producing, playing......We explore how remixing and content sharing can be used as a means for user participation in a digital museum age. Remix culture is seen as a culture that allows and encourages the production of derivative works; works that are based on already existing works. This cultural practice thrives...... throughout the Internet, most notably on web 2.0 sites like YouTube. The Media Museum has embraced the remix paradigm with the development of an interactive media experience centre called the Media Mixer. Here the museum users can produce, deconstruct, reconstruct and finally publish and share digital media...

Internal Social Media

DEFF Research Database (Denmark)

Madsen, Vibeke Thøis

2018-01-01

Internal social media is a web-based communication arena that provides all organizational members with a communication opportunity. The media has emerged in organizations since 2004, and is increasingly seen as a way of giving employees a voice in organizations which can benefit the organization...... in terms of knowledge sharing, collaboration, and employee participation and engagement. The first wave of studies of internal social media was primarily from an information-systems perspective and focused more on its adoption, its affordances, and the outcome of its introduction. The second wave...... of studies was more concerned with studying the dynamics of communication on internal social media, in order to understand coworkers as strategic communicators and how communication on internal social media can constitute the organization. With a successful introduction of internal social media, coworkers...

Tracing the Spatial-Temporal Evolution of Events Based on Social Media Data

Directory of Open Access Journals (Sweden)

Xiaolu Zhou

2017-03-01

Full Text Available Social media data provide a great opportunity to investigate event flow in cities. Despite the advantages of social media data in these investigations, the data heterogeneity and big data size pose challenges to researchers seeking to identify useful information about events from the raw data. In addition, few studies have used social media posts to capture how events develop in space and time. This paper demonstrates an efficient approach based on machine learning and geovisualization to identify events and trace the development of these events in real-time. We conducted an empirical study to delineate the temporal and spatial evolution of a natural event (heavy precipitation and a social event (Pope Francis’ visit to the US in the New York City—Washington, DC regions. By investigating multiple features of Twitter data (message, author, time, and geographic location information, this paper demonstrates how voluntary local knowledge from tweets can be used to depict city dynamics, discover spatiotemporal characteristics of events, and convey real-time information.

A data-driven model for influenza transmission incorporating media effects.

Science.gov (United States)

Mitchell, Lewis; Ross, Joshua V

2016-10-01

Numerous studies have attempted to model the effect of mass media on the transmission of diseases such as influenza; however, quantitative data on media engagement has until recently been difficult to obtain. With the recent explosion of 'big data' coming from online social media and the like, large volumes of data on a population's engagement with mass media during an epidemic are becoming available to researchers. In this study, we combine an online dataset comprising millions of shared messages relating to influenza with traditional surveillance data on flu activity to suggest a functional form for the relationship between the two. Using this data, we present a simple deterministic model for influenza dynamics incorporating media effects, and show that such a model helps explain the dynamics of historical influenza outbreaks. Furthermore, through model selection we show that the proposed media function fits historical data better than other media functions proposed in earlier studies.

Numerical modeling of the radiative transfer in a turbid medium using the synthetic iteration.

Science.gov (United States)

Budak, Vladimir P; Kaloshin, Gennady A; Shagalov, Oleg V; Zheltov, Victor S

2015-07-27

In this paper we propose the fast, but the accurate algorithm for numerical modeling of light fields in the turbid media slab. For the numerical solution of the radiative transfer equation (RTE) it is required its discretization based on the elimination of the solution anisotropic part and the replacement of the scattering integral by a finite sum. The solution regular part is determined numerically. A good choice of the method of the solution anisotropic part elimination determines the high convergence of the algorithm in the mean square metric. The method of synthetic iterations can be used to improve the convergence in the uniform metric. A significant increase in the solution accuracy with the use of synthetic iterations allows applying the two-stream approximation for the regular part determination. This approach permits to generalize the proposed method in the case of an arbitrary 3D geometry of the medium.

Scaffolding Teachers Integrate Social Media into a Problem-Based Learning Approach?

Science.gov (United States)

Buus, Lillian

2012-01-01

At Aalborg University (AAU) we are known to work with problem-based learning (PBL) in a particular way designated "The Aalborg PBL model." In PBL the focus is on participant control, knowledge sharing, collaboration among participants, which makes it interesting to consider the integration of social media in the learning that takes…

Social Media in IS Literature

DEFF Research Database (Denmark)

Dyrby, Signe

2013-01-01

The phenomenon of ‘digital living’ is to a high extent influenced by the introduction of new media into society. Especially, social media are affecting the digital world of today and are setting the agenda for social connectedness in private, public and commercial networks. Based in an initial...... desire to explore a research agenda for the workings of social media in network structures a look into the literature on social media within the field of Information Systems sparked an interest in exploring a new research perspective for social media. Reviewing the IS literature it is apparent...... that the perspective of the ‘media’ as an artifact of social media has been neglected in existing literature. Based in this, this paper proposes research possibilities for investigating the ‘media’ of social media as well as some theoretical considerations that could aid the investigation. Finally, potential outcomes...

Soil remediation by heat injection: Experiments and numerical modelling

Energy Technology Data Exchange (ETDEWEB)

Betz, C.; Emmert, M.; Faerber, A. [Univ. of Stuttgart (Germany)] [and others

1995-03-01

In order to understand physical processes of thermally enhanced soil vapor extraction methods in porous media the isothermal, multiphase formulation for the numerical model MUFTE will be extended by a non-isothermal, multiphase-multicomponent formulation. In order to verify the numerical model, comparison with analytical solutions for well defined problems will be carried out. To identify relevant processes and their interactions, the results of the simulation will be compared with well controlled experiments with sophisticated measurement equipment in three different scales. The aim is to compare the different numerical solution techniques namely Finite Element versus Integral Finite Difference technique as implemented in MUFTE and TOUGH2 [9] respectively.

Modern Media Education Models

Science.gov (United States)

Fedorov, Alexander

2011-01-01

The author supposed that media education models can be divided into the following groups: (1) educational-information models (the study of the theory, history, language of media culture, etc.), based on the cultural, aesthetic, semiotic, socio-cultural theories of media education; (2) educational-ethical models (the study of moral, religions,…

Adaptive mesh refinement and multilevel iteration for multiphase, multicomponent flow in porous media

Energy Technology Data Exchange (ETDEWEB)

Hornung, R.D. [Duke Univ., Durham, NC (United States)

1996-12-31

An adaptive local mesh refinement (AMR) algorithm originally developed for unsteady gas dynamics is extended to multi-phase flow in porous media. Within the AMR framework, we combine specialized numerical methods to treat the different aspects of the partial differential equations. Multi-level iteration and domain decomposition techniques are incorporated to accommodate elliptic/parabolic behavior. High-resolution shock capturing schemes are used in the time integration of the hyperbolic mass conservation equations. When combined with AMR, these numerical schemes provide high resolution locally in a more efficient manner than if they were applied on a uniformly fine computational mesh. We will discuss the interplay of physical, mathematical, and numerical concerns in the application of adaptive mesh refinement to flow in porous media problems of practical interest.

Media activism as movement?: collective identity formation in the World Forum of Free Media

OpenAIRE

Stephansen, Hilde C.

2017-01-01

More than simply tools used by social movements to reach other substantive aims, media are increasingly becoming subjects of activism. This article contributes to advancing understanding of such media-focused activism through a case study of the World Forum of Free Media, a thematic forum for media activists and media advocacy organisations linked to the World Social Forum. Based on qualitative research conducted between 2008 and 2016 -including participant observation, in-depth interviews an...

Electro-chemo-hydro-mechanical coupling in clayey media

International Nuclear Information System (INIS)

Lemaire, Th.

2004-12-01

The aim of this study is to understand coupled phenomena that occur in swelling porous materials like clays. Electro-chemo-hydro-mechanical contributions are taken into account to analyze transfers in such minerals. In a first part, a general discussion is proposed to introduce mineralogical and physico- chemical considerations of clayey media. An important objective of this chapter is to show the crucial role of the microstructure. In a second part is presented an imbibition test in a MX80 bentonite powder. The hydraulic diffusivity versus water content curve's decrease is explained thanks to a double porosity model that shows the progressive collapse of meso-pores due to swelling effects at the micro-scale. Thus a multi-scale analysis is necessary to well describe clayey media behaviour. The third chapter exposes such a multi-scale modelling (periodic homogenization). It is based on the double-layer theory and introduces an innovative concept of virtual electrolyte solution. First numerical results are given in a simple geometry (parallel platelets). In the next part are proposed numerical simulations of two kinds: response of the system to a chemical gradient and simulation of electro-osmosis. The end of this chapter puts into relief the necessity to integrate pH effects in the model. In the last part, chemical surface exchanges are incorporated in the modelling to understand pH and ionic force roles in electro-osmotic process. (author)

Hybrid monitoring scheme for end-to-end performance enhancement of multicast-based real-time media

Science.gov (United States)

Park, Ju-Won; Kim, JongWon

2004-10-01

As real-time media applications based on IP multicast networks spread widely, end-to-end QoS (quality of service) provisioning for these applications have become very important. To guarantee the end-to-end QoS of multi-party media applications, it is essential to monitor the time-varying status of both network metrics (i.e., delay, jitter and loss) and system metrics (i.e., CPU and memory utilization). In this paper, targeting the multicast-enabled AG (Access Grid) a next-generation group collaboration tool based on multi-party media services, the applicability of hybrid monitoring scheme that combines active and passive monitoring is investigated. The active monitoring measures network-layer metrics (i.e., network condition) with probe packets while the passive monitoring checks both application-layer metrics (i.e., user traffic condition by analyzing RTCP packets) and system metrics. By comparing these hybrid results, we attempt to pinpoint the causes of performance degradation and explore corresponding reactions to improve the end-to-end performance. The experimental results show that the proposed hybrid monitoring can provide useful information to coordinate the performance improvement of multi-party real-time media applications.

Calculating qP-wave traveltimes in 2-D TTI media by high-order fast sweeping methods with a numerical quartic equation solver

Science.gov (United States)

Han, Song; Zhang, Wei; Zhang, Jie

2017-09-01

A fast sweeping method (FSM) determines the first arrival traveltimes of seismic waves by sweeping the velocity model in different directions meanwhile applying a local solver. It is an efficient way to numerically solve Hamilton-Jacobi equations for traveltime calculations. In this study, we develop an improved FSM to calculate the first arrival traveltimes of quasi-P (qP) waves in 2-D tilted transversely isotropic (TTI) media. A local solver utilizes the coupled slowness surface of qP and quasi-SV (qSV) waves to form a quartic equation, and solve it numerically to obtain possible traveltimes of qP-wave. The proposed quartic solver utilizes Fermat's principle to limit the range of the possible solution, then uses the bisection procedure to efficiently determine the real roots. With causality enforced during sweepings, our FSM converges fast in a few iterations, and the exact number depending on the complexity of the velocity model. To improve the accuracy, we employ high-order finite difference schemes and derive the second-order formulae. There is no weak anisotropy assumption, and no approximation is made to the complex slowness surface of qP-wave. In comparison to the traveltimes calculated by a horizontal slowness shooting method, the validity and accuracy of our FSM is demonstrated.

GIS-based two-dimensional numerical simulation of rainfall-induced debris flow

Directory of Open Access Journals (Sweden)

C. Wang

2008-02-01

Full Text Available This paper aims to present a useful numerical method to simulate the propagation and deposition of debris flow across the three dimensional complex terrain. A depth-averaged two-dimensional numerical model is developed, in which the debris and water mixture is assumed to be continuous, incompressible, unsteady flow. The model is based on the continuity equations and Navier-Stokes equations. Raster grid networks of digital elevation model in GIS provide a uniform grid system to describe complex topography. As the raster grid can be used as the finite difference mesh, the continuity and momentum equations are solved numerically using the finite difference method. The numerical model is applied to simulate the rainfall-induced debris flow occurred in 20 July 2003, in Minamata City of southern Kyushu, Japan. The simulation reproduces the propagation and deposition and the results are in good agreement with the field investigation. The synthesis of numerical method and GIS makes possible the solution of debris flow over a realistic terrain, and can be used to estimate the flow range, and to define potentially hazardous areas for homes and road section.

Solution of the porous media equation by Adomian's decomposition method

International Nuclear Information System (INIS)

Pamuk, Serdal

2005-01-01

The particular exact solutions of the porous media equation that usually occurs in nonlinear problems of heat and mass transfer, and in biological systems are obtained using Adomian's decomposition method. Also, numerical comparison of particular solutions in the decomposition method indicate that there is a very good agreement between the numerical solutions and particular exact solutions in terms of efficiency and accuracy

Understanding Citizenship, Understanding Social Media? The effects of digital media on citizenship understanding and political participation

DEFF Research Database (Denmark)

Ohme, Jakob; Albæk, Erik

Is there a connection between increased use of digital media and changing patterns of political participation? This study tests how use of online media for different purposes (social interaction, creative expression, online news use, social media news use) is related to three types of political...... participation. It examines whether mobilizing effects are partly indirect due to different understandings of citizenship (dutiful, optional, individual, collective) that may be fostered by digital media use. The study is based on a survey of a sample of the Danish population (n=1322), including data from two...... online survey waves and a smartphone-based media diary that documents respondents’ social media use. Results indicate support for a new pathway to participation, but the relationship depends on whether citizens are socialized in a digital media environment....

Influence of Culture Media on Microbial Fingerprints Using Raman Spectroscopy

OpenAIRE

Mlyn?rikov?, Katar?na; Samek, Ota; Bernatov?, Silvie; R??i?ka, Filip; Je?ek, Jan; H?ronikov?, Andrea; ?iler, Martin; Zem?nek, Pavel; Hol?, Veronika

2015-01-01

Raman spectroscopy has a broad range of applications across numerous scientific fields, including microbiology. Our work here monitors the influence of culture media on the Raman spectra of clinically important microorganisms (Escherichia coli, Staphylococcus aureus, Staphylococcus epidermidis and Candida albicans). Choosing an adequate medium may enhance the reproducibility of the method as well as simplifying the data processing and the evaluation. We tested four different media per organis...

Normalized inverse characterization of sound absorbing rigid porous media.

Science.gov (United States)

Zieliński, Tomasz G

2015-06-01

This paper presents a methodology for the inverse characterization of sound absorbing rigid porous media, based on standard measurements of the surface acoustic impedance of a porous sample. The model parameters need to be normalized to have a robust identification procedure which fits the model-predicted impedance curves with the measured ones. Such a normalization provides a substitute set of dimensionless (normalized) parameters unambiguously related to the original model parameters. Moreover, two scaling frequencies are introduced, however, they are not additional parameters and for different, yet reasonable, assumptions of their values, the identification procedure should eventually lead to the same solution. The proposed identification technique uses measured and computed impedance curves for a porous sample not only in the standard configuration, that is, set to the rigid termination piston in an impedance tube, but also with air gaps of known thicknesses between the sample and the piston. Therefore, all necessary analytical formulas for sound propagation in double-layered media are provided. The methodology is illustrated by one numerical test and by two examples based on the experimental measurements of the acoustic impedance and absorption of porous ceramic samples of different thicknesses and a sample of polyurethane foam.

New insights into designing metallacarborane based room temperature hydrogen storage media.

Science.gov (United States)

Bora, Pankaj Lochan; Singh, Abhishek K

2013-10-28

Metallacarboranes are promising towards realizing room temperature hydrogen storage media because of the presence of both transition metal and carbon atoms. In metallacarborane clusters, the transition metal adsorbs hydrogen molecules and carbon can link these clusters to form metal organic framework, which can serve as a complete storage medium. Using first principles density functional calculations, we chalk out the underlying principles of designing an efficient metallacarborane based hydrogen storage media. The storage capacity of hydrogen depends upon the number of available transition metal d-orbitals, number of carbons, and dopant atoms in the cluster. These factors control the amount of charge transfer from metal to the cluster, thereby affecting the number of adsorbed hydrogen molecules. This correlation between the charge transfer and storage capacity is general in nature, and can be applied to designing efficient hydrogen storage systems. Following this strategy, a search for the best metallacarborane was carried out in which Sc based monocarborane was found to be the most promising H2 sorbent material with a 9 wt.% of reversible storage at ambient pressure and temperature.

Microwave radiative transfer intercomparison study for 3-D dichroic media

International Nuclear Information System (INIS)

Battaglia, A.; Davis, C.P.; Emde, C.; Simmer, C.

2007-01-01

Three different numerical methods capable of solving the radiative transfer of microwave radiation within 3-D dichroic media are compared. A case study, represented by an intense rain shaft populated by perfectly oriented oblate raindrops, is analysed in detail, including a discussion of the behaviour of all four Stokes components. Results demonstrate an acceptable agreement between all Monte Carlo methods. The method based on a discrete ordinates scheme agrees only qualitatively with the Monte Carlo outputs. Because of its lower computational cost the backward Monte Carlo technique based on importance sampling represents the most efficient way to face passive microwave radiative transfer problems related to optically thick 3-D structured clouds including non-spherical preferentially oriented hydrometeors

Numerical methods for characterization of synchrotron radiation based on the Wigner function method

Directory of Open Access Journals (Sweden)

Takashi Tanaka

2014-06-01

Full Text Available Numerical characterization of synchrotron radiation based on the Wigner function method is explored in order to accurately evaluate the light source performance. A number of numerical methods to compute the Wigner functions for typical synchrotron radiation sources such as bending magnets, undulators and wigglers, are presented, which significantly improve the computation efficiency and reduce the total computation time. As a practical example of the numerical characterization, optimization of betatron functions to maximize the brilliance of undulator radiation is discussed.

Numerical prediction and measurement of optoacoustic signals generated in PVA-H tissue phantoms

Science.gov (United States)

Melchert, Oliver; Blumenröther, Elias; Wollweber, Merve; Roth, Bernhard

2018-01-01

We present numerical simulations of optoacoustic (OA) signals, complementing laboratory experiments on melanin doped polyvinyl alcohol hydrogel (PVA-H) tissue phantoms. We review the computational approach to model the underlying mechanisms, i.e. optical absorption of laser energy and acoustic propagation of mechanical stress, geared toward experiments that involve absorbing media with homogeneous acoustic properties. We apply the numerical procedure to predict signals observed in the acoustic near- and farfield in both, forward and backward detection mode, in PVA-H tissue phantoms (i.e. an elastic solid). Further, we report on verification tests of our research code based on OA experiments on dye solution (i.e. a liquid) detailed in the literature and benchmark our 3D procedure via limiting cases described in terms of effectively 1D theoretical approaches.

Coupled electric and transport phenomena in porous media

NARCIS (Netherlands)

Li, Shuai

2014-01-01

The coupled electrical and transport properties of clay-containing porous media are the topics of interest in this study. Both experimental and numerical (pore network modeling) techniques are employed to gain insight into the macro-scale interaction between electrical and solute transport phenomena

Evaluation of a school-based violence prevention media literacy curriculum.

Science.gov (United States)

Fingar, Kathryn R; Jolls, Tessa

2014-06-01

Evaluate whether Beyond Blame, a violence prevention media literacy curriculum, is associated with improved knowledge, beliefs and behaviours related to media use and aggression. Using a quasi-experimental design, from 2007 to 2008, teachers from schools across Southern California administered the curriculum with or without training or served as controls. Students were tested before and after the curriculum was implemented, and during the fall semester of the next academic year. Multivariate hierarchical regression was used to compare changes from baseline to follow-up between the intervention and control groups. Compared with controls, at the first post-test, students in the trained and untrained groups reported increased knowledge of five core concepts/key questions of media literacy, increased self-rated exposure to media violence, as well as stronger beliefs that media violence affects viewers and that people can protect themselves by watching less. Regarding behaviours, controls were more likely to report ≥8 h of media consumption at the second post-test than at baseline (OR=2.11; 95% CI 1.13 to 3.97), pushing or shoving another student (OR=2.16; 95% CI 1.16 to 4.02) and threatening to hit or hurt someone (OR=2.32; 95% CI 1.13 to 4.78). In comparison, there was no increase in these behaviours in the trained and untrained groups. This study suggests media literacy can be feasibly integrated into schools as an approach to improving critical analysis of media, media consumption and aggression. Changing the way youth engage media may impact many aspects of health, and an important next step will be to apply this framework to other topics. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

On POD-based Deflation Vectors for DPCG applied to porous media problems

NARCIS (Netherlands)

Diaz Cortes, G.B.; Vuik, C.; Jansen, J.D.

2018-01-01

We study fast and robust iterative solvers for large systems of linear equations resulting from simulation of flow trough strongly heterogeneous porous media. We propose the use of preconditioning and deflation techniques, based on information obtained frfrom the system, to reduce the time spent in

Direct and inverse scattering for viscoelastic media

International Nuclear Information System (INIS)

Ammicht, E.; Corones, J.P.; Krueger, R.J.

1987-01-01

A time domain approach to direct and inverse scattering problems for one-dimensional viscoelastic media is presented. Such media can be characterized as having a constitutive relation between stress and strain which involves the past history of the strain through a memory function, the relaxation modulus. In the approach in this article, the relaxation modulus of a material is shown to be related to the reflection properties of the material. This relation provides a constructive algorithm for direct and inverse scattering problems. A numerical implementation of this algorithm is tested on several problems involving realistic relaxation moduli

Numerical study of natural convection in porous media (metals) using Lattice Boltzmann Method (LBM)

Energy Technology Data Exchange (ETDEWEB)

Zhao, C.Y., E-mail: c.y.zhao@warwick.ac.u [School of Engineering, University of Warwick, Coventry CV4 7AL (United Kingdom); School of Energy and Power Engineering, Xi' an Jiaotong University, Xi' an, Shaanxi 710049 (China); Dai, L.N.; Tang, G.H.; Qu, Z.G.; Li, Z.Y. [School of Energy and Power Engineering, Xi' an Jiaotong University, Xi' an, Shaanxi 710049 (China)

2010-10-15

A thermal lattice BGK model with doubled populations is proposed to simulate the two-dimensional natural convection flow in porous media (porous metals). The accuracy of this method is validated by the benchmark solutions. The detailed flow and heat transfer at the pore level are revealed. The effects of pore density (cell size) and porosity on the natural convection are examined. Also the effect of porous media configuration (shape) on natural convection is investigated. The results showed that the overall heat transfer will be enhanced by lowering the porosity and cell size. The square porous medium can have a higher heat transfer performance than spheres due to the strong flow mixing and more surface area.

Dynamic imaging through turbid media based on digital holography.

Science.gov (United States)

Li, Shiping; Zhong, Jingang

2014-03-01

Imaging through turbid media using visible or IR light instead of harmful x ray is still a challenging problem, especially in dynamic imaging. A method of dynamic imaging through turbid media using digital holography is presented. In order to match the coherence length between the dynamic object wave and the reference wave, a cw laser is used. To solve the problem of difficult focusing in imaging through turbid media, an autofocus technology is applied. To further enhance the image contrast, a spatial filtering technique is used. A description of digital holography and experiments of imaging the objects hidden in turbid media are presented. The experimental result shows that dynamic images of the objects can be achieved by the use of digital holography.

An assessment of first-order stochastic dispersion theories in porous media

Science.gov (United States)

Chin, David A.

1997-12-01

Random realizations of three-dimensional exponentially correlated hydraulic conductivity fields are used in a finite-difference numerical flow model to calculate the mean and covariance of the corresponding Lagrangian-velocity fields. The dispersivity of the porous medium is then determined from the Lagrangian-velocity statistics using the Taylor definition. This estimation procedure is exact, except for numerical errors, and the results are used to assess the accuracy of various first-order dispersion theories in both isotropic and anisotropic porous media. The results show that the Dagan theory is by far the most robust in both isotropic and anisotropic media, producing accurate values of the principal dispersivity components for σy as high as 1.0, In the case of anisotropic media where the flow is at an angle to the principal axis of hydraulic conductivity, it is shown that the dispersivity tensor is rotated away from the flow direction in the non-Fickian phase, but eventually coincides with the flow direction in the Fickian phase.

Migration of radionuclide through two-layered geologic media

International Nuclear Information System (INIS)

Nakayama, Shinichi; Takagi, Ikuji; Nakai, Kunihiro; Higashi, Kunio

1984-01-01

For the safety assessment of geologic disposal of high-level radioactive wastes, an analytical solution was obtained for one-dimensional migration of radionuclide through two-layered geologic media without dispersion. By applying it to geologic media composed of granite and soil layers, the effect of interlayer boundary on the discharge profile of radionuclides in decay chains into biological environment is examined. The time-space profiles of radionuclides in the vicinity of interlayer boundary are much complicated as shown in the results of calculation. Those profiles in case that the groundwater flows through granite followed by soil are quite different from those in case that the groundwater flows through soil followed by granite. Each of complicated dependence of profiles on time and space can be physically explained. The characteristic profiles in the vicinity of interlayer boundary have not been discussed previously. Recently, numerical computer codes has been developed to apply to much more realistic geologic situations. However, the numerical accuracies of the codes are necessary to be confirmed. This is achieved by comparing computational results with results from analytical solutions. The analytical solution presented will serve as a bench-mark for numerical accuracy. (author)

Fast Near-Field Calculation for Volume Integral Equations for Layered Media

DEFF Research Database (Denmark)

Kim, Oleksiy S.; Meincke, Peter; Breinbjerg, Olav

2005-01-01

. Afterwards, the scattered electric field can be easily computed at a regular rectangular grid on any horizontal plane us-ing a 2-dimensional FFT. This approach provides significant speedup in the near-field calculation in comparison to a straightforward numerical evaluation of the ra-diation integral since......An efficient technique based on the Fast Fourier Transform (FFT) for calculating near-field scattering by dielectric objects in layered media is presented. A higher or-der method of moments technique is employed to solve the volume integral equation for the unknown induced volume current density...

Islam and Media Representations

Directory of Open Access Journals (Sweden)

Mohamed Bensalah

2006-04-01

Full Text Available For the author of this article, the media’s treatment of Islam has raised numerous polymorphous questions and debates. Reactivated by the great scares of current events, the issue, though an ancient one, calls many things into question. By way of introduction, the author tries to analyse the complex processes of elaboration and perception of the representations that have prevailed during the past century. In referring to the semantic decoding of the abundant colonial literature and iconography, the author strives to translate the extreme xenophobic tensions and the identity crystallisations associated with the current media orchestration of Islam, both in theWest and the East. He then evokes the excesses of the media that are found at the origin of many amalgams wisely maintained between Islam, Islamism and Islamic terrorism, underscoring their duplicity and their willingness to put themselves, consciously, in service to deceivers and directors of awareness, who are very active at the heart of the politico-media sphere. After levelling a severe accusation against the harmful drifts of the media, especially in times of crisis and war, the author concludes by asserting that these tools of communication, once they are freed of their masks and invective apparatuses, can be re-appropriated by new words and bya true communication between peoples and cultures.

Effective ellipsoidal models for wavefield extrapolation in tilted orthorhombic media

KAUST Repository

Waheed, Umair Bin

2016-04-22

Wavefield computations using the ellipsoidally anisotropic extrapolation operator offer significant cost reduction compared to that for the orthorhombic case, especially when the symmetry planes are tilted and/or rotated. However, ellipsoidal anisotropy does not provide accurate wavefield representation or imaging for media of orthorhombic symmetry. Therefore, we propose the use of ‘effective ellipsoidally anisotropic’ models that correctly capture the kinematic behaviour of wavefields for tilted orthorhombic (TOR) media. We compute effective velocities for the ellipsoidally anisotropic medium using kinematic high-frequency representation of the TOR wavefield, obtained by solving the TOR eikonal equation. The effective model allows us to use the cheaper ellipsoidally anisotropic wave extrapolation operators. Although the effective models are obtained by kinematic matching using high-frequency asymptotic, the resulting wavefield contains most of the critical wavefield components, including frequency dependency and caustics, if present, with reasonable accuracy. The proposed methodology offers a much better cost versus accuracy trade-off for wavefield computations in TOR media, particularly for media of low to moderate anisotropic strength. Furthermore, the computed wavefield solution is free from shear-wave artefacts as opposed to the conventional finite-difference based TOR wave extrapolation scheme. We demonstrate applicability and usefulness of our formulation through numerical tests on synthetic TOR models. © 2016 Institute of Geophysics of the ASCR, v.v.i

Transient two-dimensional flow in porous media

International Nuclear Information System (INIS)

Sharpe, L. Jr.

1979-01-01

The transient flow of an isothermal ideal gas from the cavity formed by an underground nuclear explosion is investigated. A two-dimensional finite element method is used in analyzing the gas flow. Numerical results of the pressure distribution are obtained for both the stemming column and the surrounding porous media

[Development of an evidence-based media campaign to promote walking among physically inactive women and increased physical activity among adults].

Science.gov (United States)

Escalon, Hélène; Serry, Anne-Juliette; Nguyen-Thanh, Viêt; Vuillemin, Anne; Oppert, Jean-Michel; Sarrazin, Philippe; Verlhiac, Jean-Francois; Salanave, Benoît; Simon, Chantal; Tausan, Simona; Dailly, Olivier; Arwidson, Pierre

2016-06-08

This paper demonstrates the feasibility of developing a multimodal media campaign-based intervention to promote physical activity using theory, evidence and media campaign construction expertise. An evaluation of this media campaign and its various components is the next stage of this work..

Developing Social Media-Based Suicide Prevention Messages in Partnership With Young People: Exploratory Study.

Science.gov (United States)

Robinson, Jo; Bailey, Eleanor; Hetrick, Sarah; Paix, Steve; O'Donnell, Matt; Cox, Georgina; Ftanou, Maria; Skehan, Jaelea

2017-10-04

Social media is increasingly being used by young people for health-related issues, including communicating about suicide. Due to the concerns about causing distress or inducing suicidal thoughts or behaviors, to date young people neither have been engaged in the development of social media-based suicide prevention interventions nor have interventions focused on educating young people about safe ways to communicate about suicide online. Given the potential that social media holds to deliver messages to vast numbers of people across space and time and the fact that young people often prefer to seek help from their friends and peers, safely educating and engaging young people to develop suicide prevention messages that can be delivered via social media is an obvious next step. The objectives of this study were to (1) provide education to a small number of secondary school students about safe ways to communicate about suicide via social media; (2) engage the same young people in the development of a suite of social media-based suicide prevention multimedia messages; (3) assess the impact of this on participants; and (4) assess the acceptability and safety of the messages developed. This study involved two phases. In phase 1, 20 participants recruited from two schools took part in an 8- to 10-week program during which they were provided with psychoeducation about mental health and suicide, including how to talk safely about suicide online, and they were then supported to design and develop their own media messages. These participants completed an evaluation questionnaire at the conclusion of the program. In phase 2, a larger group of participants (n=69), recruited via an opt-in process, viewed the media messages and completed a short questionnaire about each one. Participants in phase 1 enjoyed the program and reported that they learned new skills, such as how to talk safely about suicide online, and felt more able to provide emotional support to others (16/20, 80%). No

Haters Phenomena in Social Media

OpenAIRE

Pradipta, Angga; Lailiyah, S.Sos, M.I.Kom, Nuriyatul

2016-01-01

Social media is internet-basic media, functioned as interaction media room based on multimedia technology. And social media created some effects. One of the negative effects of social media is haters phenomena. Haters are a person who easily said dirty words, harass, and humiliate to others. This phenomena causes anxiety—especially in Indonesia, even the Government issued public policy and letter of regulation about this phenomena, through Paragraph 27 verse (3) IT Constitution, Paragraph 45 ...

Suicide in the media: a quantitative review of studies based on non-fictional stories.

Science.gov (United States)

Stack, Steven

2005-04-01

Research on the effect of suicide stories in the media on suicide in the real world has been marked by much debate and inconsistent findings. Recent narrative reviews have suggested that research based on nonfictional models is more apt to uncover imitative effects than research based on fictional models. There is, however, substantial variation in media effects within the research restricted to nonfictional accounts of suicide. The present analysis provides some explanations of the variation in findings in the work on nonfictional media. Logistic regression techniques applied to 419 findings from 55 studies determined that: (1) studies measuring the presence of either an entertainment or political celebrity were 5.27 times more likely to find a copycat effect, (2) studies focusing on stories that stressed negative definitions of suicide were 99% less likely to report a copycat effect, (3) research based on television stories (which receive less coverage than print stories) were 79% less likely to find a copycat effect, and (4) studies focusing on female suicide were 4.89 times more likely to report a copycat effect than other studies. The full logistic regression model correctly classified 77.3% of the findings from the 55 studies. Methodological differences among studies are associated with discrepancies in their results.

Multi-Scale Coupling Between Monte Carlo Molecular Simulation and Darcy-Scale Flow in Porous Media

KAUST Repository

Saad, Ahmed Mohamed

2016-06-01

In this work, an efficient coupling between Monte Carlo (MC) molecular simulation and Darcy-scale flow in porous media is presented. The cell centered finite difference method with non-uniform rectangular mesh were used to discretize the simulation domain and solve the governing equations. To speed up the MC simulations, we implemented a recently developed scheme that quickly generates MC Markov chains out of pre-computed ones, based on the reweighting and reconstruction algorithm. This method astonishingly reduces the required computational times by MC simulations from hours to seconds. To demonstrate the strength of the proposed coupling in terms of computational time efficiency and numerical accuracy in fluid properties, various numerical experiments covering different compressible single-phase flow scenarios were conducted. The novelty in the introduced scheme is in allowing an efficient coupling of the molecular scale and the Darcy\\'s one in reservoir simulators. This leads to an accurate description of thermodynamic behavior of the simulated reservoir fluids; consequently enhancing the confidence in the flow predictions in porous media.

The Media Mixer

DEFF Research Database (Denmark)

Vestergaard, Vitus; Mortensen, Christian Hviid

In recent years many museums have experimented with different approaches to involving users through digital media. We explore how remixing and content sharing can be used as a means for user participation. Remix culture is seen as a culture that allows and encourages the production of derivative...... works; works that are based on already existing works. This cultural practice thrives throughout the Internet, most notably on web2.0 sites like YouTube. The Media Museum has embraced the remix paradigm with the development of an interactive media experience centre called the Media Mixer. Here...... the museum users can produce, deconstruct, reconstruct and finally publish and share digital media content. The media content is created by the user in the museums physical environment, but it can be mixed with material from local or global archives. In that way the gap between the analogue and the digital...

Modeling of the write and read back performances of hexagonal Ba-ferrite particulate media for high density tape recording

International Nuclear Information System (INIS)

Lee, Jehyun; Fuger, Markus; Fidler, Josef; Suess, Dieter; Schrefl, Thomas; Shimizu, Osamu

2010-01-01

In this study, the signal-to-noise ratio (SNR) performances of longitudinally, randomly, and perpendicularly oriented particles, based on hexagonal barium ferrite (h-BaFe) platelets with an average volume of 2400 nm 3 have been studied as a function of the recording head to media distance by numerical micromagnetic simulations. The distances from the write head to media and from the read head to media were varied independently. For a fixed read distance and varied writing distances, the SNR was decreasing in larger write distance. An optimum write distance of 40 and 50 nm was found for the longitudinally oriented media and the perpendicularly oriented media, respectively. The optimum write distance for longitudinally oriented media, 40 nm, resulted in the local minimum SNR for the perpendicularly oriented media. In most write distances the perpendicularly oriented media show the outstanding best performance, but near the write distance of 40 nm the longitudinally oriented media work as good as the perpendicularly oriented media. In a fixed write distance with various read distances, the SNR was almost constant in each media whereas the average signal amplitude was exponentially decayed in larger read head to media distance. The best SNR was found in the perpendicularly oriented media at write head to media distance d write =20 nm and read head to media distance d read =40 nm. The best SNR value is 11.9 and 24.4 dB in time domain and frequency domain, respectively.

Social media as an open-learning resource in medical education: current perspectives.

Science.gov (United States)

Sutherland, S; Jalali, A

2017-01-01

Numerous studies evaluate the use of social media as an open-learning resource in education, but there is a little published knowledge of empirical evidence that such open-learning resources produce educative outcomes, particularly with regard to student performance. This study undertook a systematic review of the published literature in medical education to determine the state of the evidence as to empirical studies that conduct an evaluation or research regarding social media and open-learning resources. The authors searched MEDLINE, ERIC, Embase, PubMed, Scopus, and Google Scholar from 2012 to 2017. This search included using keywords related to social media, medical education, research, and evaluation, while restricting the search to peer reviewed, English language articles only. To meet inclusion criteria, manuscripts had to employ evaluative methods and undertake empirical research. Empirical work designed to evaluate the impact of social media as an open-learning resource in medical education is limited as only 13 studies met inclusion criteria. The majority of these studies used undergraduate medical education as the backdrop to investigate open-learning resources, such as Facebook, Twitter, and YouTube. YouTube appears to have little educational value due to the unsupervised nature of content added on a daily basis. Overall, extant reviews have demonstrated that we know a considerable amount about social media use, although to date, its impacts remain unclear. There is a paucity of outcome-based, empirical studies assessing the impact of social media in medical education. The few empirical studies identified tend to focus on evaluating the affective outcomes of social media and medical education as opposed to understanding any linkages between social media and performance outcomes. Given the potential for social media use in medical education, more empirical evaluative studies are required to determine educational value.

A review of numerical simulation of hydrothermal systems.

Science.gov (United States)

Mercer, J.W.; Faust, C.R.

1979-01-01

Many advances in simulating single and two-phase fluid flow and heat transport in porous media have recently been made in conjunction with geothermal energy research. These numerical models reproduce system thermal and pressure behaviour and can be used for other heat-transport problems, such as high-level radioactive waste disposal and heat-storage projects. -Authors

Pengguna Media Interaktif Sebagai Kenyataan Maya: Studi Resepsi Khalayak Suarasurabaya.net Sebagai Media Interaktif

Directory of Open Access Journals (Sweden)

Ido Prijana Hadi

2011-07-01

, journalism and local media on the site of SuaraSurabaya.net and how to access subjective meanings that they have created based on t heir understanding on online media so far. The research is also interested in looking into user reception on information and communication technology based on its relevance with the selected theme namely discourses on global media in website of Radio Suara Surabaya.

The impact of media on a new product innovation diffusion: a mathematical model

Directory of Open Access Journals (Sweden)

Joydip Dhar

2015-05-01

to discuss the influence of media coverage in spreading and controlling of adopter of a particular product in a region. The model exhibits two equilibria:(i a adopter-free and (ii unique interior equilibrium. Stability analysis of the model shows that the adopter-free equilibrium is always locally asymptotically stable if the influence number of adopter $(R_0$, which depends on parameters of the system is less than unity. Otherwise if $R_0>1$, a unique interior equilibrium exists, it is locally asymptotically stable under some set of conditions. Further analytically and numerically it is observed that the region for backward bifurcation of adopter population increases with the decrease of the valid contact rate before media alert. Finally, numerically experimentations are presented to establish the effect of different media alert rate on adopter and non adopter population.

Combining numerical simulations with time-domain random walk for pathogen risk assessment in groundwater

Science.gov (United States)

Cvetkovic, V.; Molin, S.

2012-02-01

We present a methodology that combines numerical simulations of groundwater flow and advective transport in heterogeneous porous media with analytical retention models for computing the infection risk probability from pathogens in aquifers. The methodology is based on the analytical results presented in [1,2] for utilising the colloid filtration theory in a time-domain random walk framework. It is shown that in uniform flow, the results from the numerical simulations of advection yield comparable results as the analytical TDRW model for generating advection segments. It is shown that spatial variability of the attachment rate may be significant, however, it appears to affect risk in a different manner depending on if the flow is uniform or radially converging. In spite of the fact that numerous issues remain open regarding pathogen transport in aquifers on the field scale, the methodology presented here may be useful for screening purposes, and may also serve as a basis for future studies that would include greater complexity.

Children’s media use in Indonesia

NARCIS (Netherlands)

Hendriyani, [Unknown; Hollander, E.; d' Haenens, L.; Beentjes, J.W.J.

2012-01-01

This article explores how Indonesian children have integrated media into their daily lives: media ownership at home, media uses, and gratifications sought, are discussed, as is the way in which gender and social-status influence the children-media relationship. Survey data of Jakarta-based children

Using social media and machine learning to predict financial performance of a company

OpenAIRE

Forouzani, Sepehr

2016-01-01

Social media have recently become one of the most popular communicating form of media for numerous number of people. the text and posts shared on social media is widely used by researcher to analyze, study and relate them to various fields. In this master thesis, sentiment analysis has been performed on posts containing information about two companies that are shared on Twitter, and machine learning algorithms has been used to predict the financial performance of these companies.

How Are Scientists Using Social Media in the Workplace?

Directory of Open Access Journals (Sweden)

Kimberley Collins

Full Text Available Social media has created networked communication channels that facilitate interactions and allow information to proliferate within professional academic communities as well as in informal social circumstances. A significant contemporary discussion in the field of science communication is how scientists are using (or might use social media to communicate their research. This includes the role of social media in facilitating the exchange of knowledge internally within and among scientific communities, as well as externally for outreach to engage the public. This study investigates how a surveyed sample of 587 scientists from a variety of academic disciplines, but predominantly the academic life sciences, use social media to communicate internally and externally. Our results demonstrate that while social media usage has yet to be widely adopted, scientists in a variety of disciplines use these platforms to exchange scientific knowledge, generally via either Twitter, Facebook, LinkedIn, or blogs. Despite the low frequency of use, our work evidences that scientists perceive numerous potential advantages to using social media in the workplace. Our data provides a baseline from which to assess future trends in social media use within the science academy.

How Are Scientists Using Social Media in the Workplace?

Science.gov (United States)