Teaching the foundations of quantum mechanics in secondary school: a proposed conceptual structure

Directory of Open Access Journals (Sweden)

Maria de los Angeles Fanaro

2009-03-01

Full Text Available This paper is part of a doctoral thesis that investigates Basic Quantum Mechanics (QM teaching in high school. A Conceptual Structure of Reference (CSR based on the Path Integral Method of Feynman (1965 was rebuilt and a Proposed Conceptual Structure for Teaching (PCST (Otero, 2006, 2007 the basics of Quantum Mechanics at secondary school was designed, analysed and carried out. This PCST does not follow the historical route and it is complementary to the canonical formalism. The concepts: probability distribution, quantum system, x(t alternative, amplitude of probability, sum of probability amplitude, action, Planck's constant, and classic-quantum transition were rebuilt with the students. Mathematical formalism was avoided by using simulation software assistance. The Proposed Conceptual Structure for Teaching (PCST is described and some results from the test carried out by the class group are discussed. This information allows the analysis of the Conceptual Structure Effectively Reconstructed (CSER to be initiated with the students.

Haemodynamic improvement of older, previously replaced mechanical mitral valves by removal of the subvalvular pannus in redo cardiac surgery.

Science.gov (United States)

Kim, Jong Hun; Kim, Tae Youn; Choi, Jong Bum; Kuh, Ja Hong

2017-01-01

Patients requiring redo cardiac surgery for diseased heart valves other than mitral valves may show increased pressure gradients and reduced valve areas of previously placed mechanical mitral valves due to subvalvular pannus formation. We treated four women who had mechanical mitral valves inserted greater than or equal to 20 years earlier and who presented with circular pannus that protruded into the lower margin of the valve ring but did not impede leaflet motion. Pannus removal improved the haemodynamic function of the mitral valve. © The Author 2016. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

Erlotinib-induced rash spares previously irradiated skin

International Nuclear Information System (INIS)

Lips, Irene M.; Vonk, Ernest J.A.; Koster, Mariska E.Y.; Houwing, Ronald H.

2011-01-01

Erlotinib is an epidermal growth factor receptor inhibitor prescribed to patients with locally advanced or metastasized non-small cell lung carcinoma after failure of at least one earlier chemotherapy treatment. Approximately 75% of the patients treated with erlotinib develop acneiform skin rashes. A patient treated with erlotinib 3 months after finishing concomitant treatment with chemotherapy and radiotherapy for non-small cell lung cancer is presented. Unexpectedly, the part of the skin that had been included in his previously radiotherapy field was completely spared from the erlotinib-induced acneiform skin rash. The exact mechanism of erlotinib-induced rash sparing in previously irradiated skin is unclear. The underlying mechanism of this phenomenon needs to be explored further, because the number of patients being treated with a combination of both therapeutic modalities is increasing. The therapeutic effect of erlotinib in the area of the previously irradiated lesion should be assessed. (orig.)

Bistable Mechanisms for Space Applications.

Science.gov (United States)

Zirbel, Shannon A; Tolman, Kyler A; Trease, Brian P; Howell, Larry L

2016-01-01

Compliant bistable mechanisms are monolithic devices with two stable equilibrium positions separated by an unstable equilibrium position. They show promise in space applications as nonexplosive release mechanisms in deployment systems, thereby eliminating friction and improving the reliability and precision of those mechanical devices. This paper presents both analytical and numerical models that are used to predict bistable behavior and can be used to create bistable mechanisms in materials not previously feasible for compliant mechanisms. Materials compatible with space applications are evaluated for use as bistable mechanisms and prototypes are fabricated in three different materials. Pin-puller and cutter release mechanisms are proposed as potential space applications.

Modeling oscillatory dynamics in brain microcircuits as a way to help uncover neurological disease mechanisms: A proposal

Energy Technology Data Exchange (ETDEWEB)

Skinner, F. K. [Toronto Western Research Institute, University Health Network, Krembil Discovery Tower, Toronto Western Hospital, 60 Leonard Street, 7th floor, 7KD411, Toronto, Ontario M5T 2S8 (Canada); Department of Medicine (Neurology), University of Toronto, 200 Elizabeth Street, Toronto, Ontario M5G 2C4 (Canada); Department of Physiology, University of Toronto Medical Sciences Building, 3rd Floor, 1 King' s College Circle, Toronto, Ontario M5S 1A8 (Canada); Ferguson, K. A. [Toronto Western Research Institute, University Health Network, Krembil Discovery Tower, Toronto Western Hospital, 60 Leonard Street, 7th floor, 7KD411, Toronto, Ontario M5T 2S8 (Canada); Department of Physiology, University of Toronto Medical Sciences Building, 3rd Floor, 1 King' s College Circle, Toronto, Ontario M5S 1A8 (Canada)

2013-12-15

There is an undisputed need and requirement for theoretical and computational studies in Neuroscience today. Furthermore, it is clear that oscillatory dynamical output from brain networks is representative of various behavioural states, and it is becoming clear that one could consider these outputs as measures of normal and pathological brain states. Although mathematical modeling of oscillatory dynamics in the context of neurological disease exists, it is a highly challenging endeavour because of the many levels of organization in the nervous system. This challenge is coupled with the increasing knowledge of cellular specificity and network dysfunction that is associated with disease. Recently, whole hippocampus in vitro preparations from control animals have been shown to spontaneously express oscillatory activities. In addition, when using preparations derived from animal models of disease, these activities show particular alterations. These preparations present an opportunity to address challenges involved with using models to gain insight because of easier access to simultaneous cellular and network measurements, and pharmacological modulations. We propose that by developing and using models with direct links to experiment at multiple levels, which at least include cellular and microcircuit, a cycling can be set up and used to help us determine critical mechanisms underlying neurological disease. We illustrate our proposal using our previously developed inhibitory network models in the context of these whole hippocampus preparations and show the importance of having direct links at multiple levels.

Proposal of New Rewritable Printing Media Using Electrophoresis and Confirmation of Its Mechanism

Science.gov (United States)

Hoshino, Yasushi; Ogura, Masahiro; Sano, Takayuki

2004-10-01

A new rewritable printing media using electrophoresis and selective heating is proposed to contribute to the reduction in paper consumption by printers. The mechanism is that when a heated part of the rewritable media is melted, white particles in that part of the media are able to move by electrophoresis. The media is initialized by heating its entire surface under the condition of voltage application and imaging is carried out by selective heating under the condition of an applied reversed-polarity voltage. Using a mixture system of carnauba wax and particles coated with titanium oxide (TiO2), the feasibility of the mechanism is confirmed.

Polyamine modification by acrolein exclusively produces 1,5-diazacyclooctanes: a previously unrecognized mechanism for acrolein-mediated oxidative stress.

Science.gov (United States)

Tsutsui, Ayumi; Imamaki, Rie; Kitazume, Shinobu; Hanashima, Shinya; Yamaguchi, Yoshiki; Kaneda, Masato; Oishi, Shinya; Fujii, Nobutaka; Kurbangalieva, Almira; Taniguchi, Naoyuki; Tanaka, Katsunori

2014-07-28

Acrolein, a toxic unsaturated aldehyde generated as a result of oxidative stress, readily reacts with a variety of nucleophilic biomolecules. Polyamines, which produced acrolein in the presence of amine oxidase, were then found to react with acrolein to produce 1,5-diazacyclooctane, a previously unrecognized but significant downstream product of oxidative stress. Although diazacyclooctane formation effectively neutralized acrolein toxicity, the diazacyclooctane hydrogel produced through a sequential diazacyclooctane polymerization reaction was highly cytotoxic. This study suggests that diazacyclooctane formation is involved in the mechanism underlying acrolein-mediated oxidative stress.

Air rudder mechanism dynamics considering two elements:Joint clearance and link flexibility

Energy Technology Data Exchange (ETDEWEB)

Li, Yuntao; Quan, Qiquan; Li, He; Tang, Dewei; Li, Zhonghong; Fan, Wenyang; Deng, Zongquan [Harbin Institute of Technology, Harbin (China)

2017-07-15

Both the impact phenomenon in the clearance revolute joint and the link deformation will influence the dynamics of the air rudder transmission mechanism, which could reduce the flight quality of an aircraft. Given the effect of the two elements, a feasible simulation method with two improvements of previous methods is proposed to analyze the dynamic characteristics of the mechanism. In previous studies, the parameters of the contact force model in multi-body dynamics software were generally determined by experience, which may cause uncertainty in the calculation precision of the contact force. Furthermore, it is difficult to solve for the elastic link deformation in the practical mechanism using the available analytical methods due to the complicated section of the link. In this paper, a Continuous contact force (CCF) model was proposed and embedded in the ADAMS by developing a routine of the CCF model. Then, the flexible model was obtained by ANSYS to obtain the elastic link deformation. The experimental results indicate that the proposed simulation method can be effectively applied to predict the dynamic behavior of the mechanism.

Beneficial Microorganisms for Corals (BMC): Proposed Mechanisms for Coral Health and Resilience.

Science.gov (United States)

Peixoto, Raquel S; Rosado, Phillipe M; Leite, Deborah Catharine de Assis; Rosado, Alexandre S; Bourne, David G

2017-01-01

The symbiotic association between the coral animal and its endosymbiotic dinoflagellate partner Symbiodinium is central to the success of corals. However, an array of other microorganisms associated with coral (i.e., Bacteria, Archaea, Fungi, and viruses) have a complex and intricate role in maintaining homeostasis between corals and Symbiodinium . Corals are sensitive to shifts in the surrounding environmental conditions. One of the most widely reported responses of coral to stressful environmental conditions is bleaching. During this event, corals expel Symbiodinium cells from their gastrodermal tissues upon experiencing extended seawater temperatures above their thermal threshold. An array of other environmental stressors can also destabilize the coral microbiome, resulting in compromised health of the host, which may include disease and mortality in the worst scenario. However, the exact mechanisms by which the coral microbiome supports coral health and increases resilience are poorly understood. Earlier studies of coral microbiology proposed a coral probiotic hypothesis, wherein a dynamic relationship exists between corals and their symbiotic microorganisms, selecting for the coral holobiont that is best suited for the prevailing environmental conditions. Here, we discuss the microbial-host relationships within the coral holobiont, along with their potential roles in maintaining coral health. We propose the term BMC (Beneficial Microorganisms for Corals) to define (specific) symbionts that promote coral health. This term and concept are analogous to the term Plant Growth Promoting Rhizosphere (PGPR), which has been widely explored and manipulated in the agricultural industry for microorganisms that inhabit the rhizosphere and directly or indirectly promote plant growth and development through the production of regulatory signals, antibiotics and nutrients. Additionally, we propose and discuss the potential mechanisms of the effects of BMC on corals, suggesting

77 FR 32069 - Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel...

Science.gov (United States)

2012-05-31

... Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.) Airplanes AGENCY... previously held by Israel Aircraft Industries, Ltd.) Model Galaxy and Gulfstream 200 airplanes. This proposed... receive about this proposed AD. Discussion The Civil Aviation Authority of Israel (CAAI), which is the...

Trials and Tribulations: Student Approaches and Difficulties with Proposing Mechanisms Using the Electron-Pushing Formalism

Science.gov (United States)

Bhattacharyya, Gautam

2014-01-01

The skill of proposing mechanisms of reactions using the electron-pushing formalism (EPF) is not only of value to practicing organic chemists but it is also emphasized to students enrolled in organic chemistry courses at all levels. Several research studies in the past decade have documented the difficulties that undergraduate, and even graduate…

Discussion of a didactic proposal on quantum mechanics with secondary school students

Science.gov (United States)

Michelini, M.; Ragazzon, R.; Santi, L.; Stefanel, A.

2004-09-01

Within some research projects a proposal for the teaching of quantum mechanics in secondary school has been carried out, and some didactic material has been prepared in order to illustrate it, offering resources for its class experimentation (www.fisica.uniud.it/URDF/). In order to study in depth the critical points, which cause learning difficulties for the students in this field, a pilot activity was carried out for a restricted group of students with which the crucial points were discussed. Some interesting elements emerged, such as for example the fact that the major problems in understanding the concept of quantum state are linked to the meaning of incompatible observables.

Statistical mechanics and the evolution of polygenic quantitative traits

NARCIS (Netherlands)

Barton, N.H.; De Vladar, H.P.

The evolution of quantitative characters depends on the frequencies of the alleles involved, yet these frequencies cannot usually be measured. Previous groups have proposed an approximation to the dynamics of quantitative traits, based on an analogy with statistical mechanics. We present a modified

Numerical simulation of the shot peening process under previous loading conditions

International Nuclear Information System (INIS)

Romero-Ángeles, B; Urriolagoitia-Sosa, G; Torres-San Miguel, C R; Molina-Ballinas, A; Benítez-García, H A; Vargas-Bustos, J A; Urriolagoitia-Calderón, G

2015-01-01

This research presents a numerical simulation of the shot peening process and determines the residual stress field induced into a component with a previous loading history. The importance of this analysis is based on the fact that mechanical elements under shot peening are also subjected to manufacturing processes, which convert raw material into finished product. However, material is not provided in a virgin state, it has a previous loading history caused by the manner it is fabricated. This condition could alter some beneficial aspects of the residual stress induced by shot peening and could accelerate the crack nucleation and propagation progression. Studies were performed in beams subjected to strain hardening in tension (5ε y ) before shot peening was applied. Latter results were then compared in a numerical assessment of an induced residual stress field by shot peening carried out in a component (beam) without any previous loading history. In this paper, it is clearly shown the detrimental or beneficial effect that previous loading history can bring to the mechanical component and how it can be controlled to improve the mechanical behavior of the material

Quantum mechanics, relativity and casuality

International Nuclear Information System (INIS)

Tati, T.

1976-01-01

In quantum mechanics, the state is prepared by a measurement on a spacelike surface sigma. What is that determine the surface sigma on which the measurement prepares the stae. It si considered either a mechanism proper to the measuring process (apparatus) or a universal property of space-time. In the former case, problems arise, concerning casuality or conservation of probability due to the fact that the velocity of reduction of a wave packet is considered to exceed the light velocity. The theory of finite degree of freedom proposed previously belongs to the latter case. In this theory, the surface sigma is restricted to the hyper-plane perpendicular to a universal time-like vector governing casual relations. An experimental to discriminate between the above-mentioned two cases and to test the existence of the universal timelike vector is proposed

Quantum mechanics, relativity and causality

International Nuclear Information System (INIS)

Tati, Takao.

1975-07-01

In quantum mechanics, the state is prepared by a measurement on a space-like surface sigma. What is that determines the surface sigma on which the measurement prepares the state It is considered either a mechanism proper to the measuring process (apparatus) or a universal property of space-time. In the former case, problems arise, concerning causality or conservation of probability due to that the velocity of reduction of wave-packet is considered to exceed the light velocity. The theory of finite degree of freedom proposed previously belongs to the latter case. In this theory, the surface sigma is restricted to the hyper-plane perpendicular to a universal time-like vector governing causal relations. We propose an experiment to discriminate between the above-mentioned two cases and to test the existence of the universal time-like vector. (auth.)

Parametrization of Combined Quantum Mechanical and Molecular Mechanical Methods: Bond-Tuned Link Atoms

Directory of Open Access Journals (Sweden)

Xin-Ping Wu

2018-05-01

Full Text Available Combined quantum mechanical and molecular mechanical (QM/MM methods are the most powerful available methods for high-level treatments of subsystems of very large systems. The treatment of the QM−MM boundary strongly affects the accuracy of QM/MM calculations. For QM/MM calculations having covalent bonds cut by the QM−MM boundary, it has been proposed previously to use a scheme with system-specific tuned fluorine link atoms. Here, we propose a broadly parametrized scheme where the parameters of the tuned F link atoms depend only on the type of bond being cut. In the proposed new scheme, the F link atom is tuned for systems with a certain type of cut bond at the QM−MM boundary instead of for a specific target system, and the resulting link atoms are call bond-tuned link atoms. In principle, the bond-tuned link atoms can be as convenient as the popular H link atoms, and they are especially well adapted for high-throughput and accurate QM/MM calculations. Here, we present the parameters for several kinds of cut bonds along with a set of validation calculations that confirm that the proposed bond-tuned link-atom scheme can be as accurate as the system-specific tuned F link-atom scheme.

Parametrization of Combined Quantum Mechanical and Molecular Mechanical Methods: Bond-Tuned Link Atoms.

Science.gov (United States)

Wu, Xin-Ping; Gagliardi, Laura; Truhlar, Donald G

2018-05-30

Combined quantum mechanical and molecular mechanical (QM/MM) methods are the most powerful available methods for high-level treatments of subsystems of very large systems. The treatment of the QM-MM boundary strongly affects the accuracy of QM/MM calculations. For QM/MM calculations having covalent bonds cut by the QM-MM boundary, it has been proposed previously to use a scheme with system-specific tuned fluorine link atoms. Here, we propose a broadly parametrized scheme where the parameters of the tuned F link atoms depend only on the type of bond being cut. In the proposed new scheme, the F link atom is tuned for systems with a certain type of cut bond at the QM-MM boundary instead of for a specific target system, and the resulting link atoms are call bond-tuned link atoms. In principle, the bond-tuned link atoms can be as convenient as the popular H link atoms, and they are especially well adapted for high-throughput and accurate QM/MM calculations. Here, we present the parameters for several kinds of cut bonds along with a set of validation calculations that confirm that the proposed bond-tuned link-atom scheme can be as accurate as the system-specific tuned F link-atom scheme.

Activation of protein kinase C by elevation of glucose concentration: Proposal for a mechanism in the development of diabetic vascular complications

International Nuclear Information System (INIS)

Lee, Tianshing; Saltsman, K.A.; Ohashi, Hiromi; King, G.L.

1989-01-01

Hyperglycemia is believed to be the major cause of diabetic vascular complications involving both microvessels and arteries as in the retina, renal glomeruli, and aorta. It is unclear by which mechanism hyperglycemia is altering the metabolism and functions of vascular cells, although changes in nonenzymatic protein glycosylation and increases in cellular sorbitol levels have been postulated to be involved. Previously, the authors have reported that the elevation of extracellular glucose levels with cultured bovine retinal capillary endothelial cells causes an increase in protein kinase C (PKC) activity of the membranous pool with a parallel decrease in the cytosol without alteration of its total activity. Now they demonstrate that the mechanism for the activation of PKC is due to an enhanced de novo synthesis of diacylglycerol as indicated by a 2-fold increase of [ 14 C]diacylglycerol labeling from [ 14 C]glucose. The elevated diacylglycerol de novo synthesis is secondarily due to increased formation of precursors derived from glucose metabolism; this formation is enhanced by hyperglycemia as substantiated by elevated [ 3 H]glucose conversion into water. This effect of hyperglycemia on PKC is also observed in cultured aortic smooth muscle and endothelial cells and the retina and kidney of diabetic rats, but not in the brain. Since PKC in vascular cells has been shown to modulate hormone receptor turnover, neovascularization in vitro, and cell growth, they propose that this mechanism of enhancing the membranous PKC activities by hyperglycemia plays an important role in the development of diabetic vascular complications

Clinical neurofeedback: case studies, proposed mechanism, and implications for pediatric neurology practice.

Science.gov (United States)

Legarda, Stella B; McMahon, Doreen; Othmer, Siegfried; Othmer, Sue

2011-08-01

Trends in alternative medicine use by American health care consumers are rising substantially. Extensive literature exists reporting on the effectiveness of neurofeedback in the treatment of autism, closed head injury, insomnia, migraine, depression, attention deficit hyperactivity disorder, epilepsy, and posttraumatic stress disorder. We speculated that neurofeedback might serve as a therapeutic modality for patients with medically refractory neurological disorders and have begun referring patients to train with clinical neurofeedback practitioners. The modality is not always covered by insurance. Confident their child's medical and neurological needs would continue to be met, the parents of 3 children with epilepsy spectrum disorder decided to have their child train in the modality. The children's individual progress following neurofeedback are each presented here. A proposed mechanism and practice implications are discussed.

Development of Pipe Holding Mechanism for Pipe Inspection Robot Using Flexible Pneumatic Cylinder

Directory of Open Access Journals (Sweden)

Choi Kyujun

2016-01-01

Full Text Available A pipe inspection robot is useful to reduce the inspection cost. In the previous study, a novel pipe inspection robot using a flexible pneumatic cylinder that can move forward along to the pipe by changing the robot’s body naturally was proposed and tested. In this paper, to improve its mobility for a corner of a pipe, the thin pipe holding mechanism using pneumatic bellows was proposed and tested. As a result of its driving test, the holding performance of the mechanism was confirmed.

Mechanism of anterior-posterior polarity control in planarians

Energy Technology Data Exchange (ETDEWEB)

Lange, C.S.; Steele, V.E.

1978-01-01

The substance which inhibits brain formation in the regenerating planarian Dugesia etrusca was found to be a large molecule, at least in part protein, which electrophoreses as an electronegative moiety in pH 6.8 buffer. A model is presented, based on this finding and previous studies, which proposes an electrochemical mechanism for the control of polarity and possibly for the maintenance of tissue organization in planarians. It is proposed that a bioelectric field exists and moves the electronegative brain-inhibiting substance in a posterior direction, establishing polarity. This model explains the polarity reversal experiments using external fields and many of the previously unexplained classical planarian experiments. Data are presented demonstrating the existence, magnitude, and polarity of this bioelectric field, which is not greatly altered upon decapitation, all in accord with predictions of the model.

Burns caused by electronic vaping devices (e-cigarettes): A new classification proposal based on mechanisms.

Science.gov (United States)

Serror, K; Chaouat, M; Legrand, Matthieu M; Depret, F; Haddad, J; Malca, N; Mimoun, M; Boccara, D

2018-05-01

Introduction With more than 10 million of daily users, e-cigarettes encountered a great success. But in the past few years, the number of medical reports of injuries caused by the explosion of e-cigarettes has significantly increased. This article aims at reporting our series and reviewing the literature to propose a new classification based on the mechanisms of injuries related to e-cigarettes that can guide non-specialists and specialists in the management of these patients. Method We performed a retrospective review of our institutional burn database from June 2016 to July 2017 for injuries caused by or in the context of using an e-cigarette. The patients' demographics (age, gender), burn injury mechanisms, depth, localization, surface and interventions were described. Results Ten patients suffered from burns related to the use of e-cigarettes. The burns were located at the thigh (80%) and the hand (50%) with a mean surface of 3% of TBSA. Four different mechanisms could be described: Type A: thermal burns with flames due to the phenomenon of "thermal runaway", Type B: blasts lesions secondary to the explosion, Type C: chemical alkali burns caused by spreading of the electrolyte solution and Type D: thermal burns without flames due to overheating. These different mechanisms suggest specific surgical and non-surgical management. Conclusion Management of injuries sustained from e-cigarettes' explosions should be approached from the standpoint of mechanisms. Different mechanisms could be associated and should be considered in specific management. Copyright © 2017 Elsevier Ltd and ISBI. All rights reserved.

Alkylation induced cerebellar degeneration dependent on Aag and Parp1 does not occur via previously established cell death mechanisms.

Directory of Open Access Journals (Sweden)

Carrie M Margulies

Full Text Available Alkylating agents are ubiquitous in our internal and external environments, causing DNA damage that contributes to mutations and cell death that can result in aging, tissue degeneration and cancer. Repair of methylated DNA bases occurs primarily through the base excision repair (BER pathway, a multi-enzyme pathway initiated by the alkyladenine DNA glycosylase (Aag, also known as Mpg. Previous work demonstrated that mice treated with the alkylating agent methyl methanesulfonate (MMS undergo cerebellar degeneration in an Aag-dependent manner, whereby increased BER initiation by Aag causes increased tissue damage that is dependent on activation of poly (ADP-ribose polymerase 1 (Parp1. Here, we dissect the molecular mechanism of cerebellar granule neuron (CGN sensitivity to MMS using primary ex vivo neuronal cultures. We first established a high-throughput fluorescent imaging method to assess primary neuron sensitivity to treatment with DNA damaging agents. Next, we verified that the alkylation sensitivity of CGNs is an intrinsic phenotype that accurately recapitulates the in vivo dependency of alkylation-induced CGN cell death on Aag and Parp1 activity. Finally, we show that MMS-induced CGN toxicity is independent of all the cellular events that have previously been associated with Parp-mediated toxicity, including mitochondrial depolarization, AIF translocation, calcium fluxes, and NAD+ consumption. We therefore believe that further investigation is needed to adequately describe all varieties of Parp-mediated cell death.

Alkylation induced cerebellar degeneration dependent on Aag and Parp1 does not occur via previously established cell death mechanisms.

Science.gov (United States)

Margulies, Carrie M; Chaim, Isaac Alexander; Mazumder, Aprotim; Criscione, June; Samson, Leona D

2017-01-01

Alkylating agents are ubiquitous in our internal and external environments, causing DNA damage that contributes to mutations and cell death that can result in aging, tissue degeneration and cancer. Repair of methylated DNA bases occurs primarily through the base excision repair (BER) pathway, a multi-enzyme pathway initiated by the alkyladenine DNA glycosylase (Aag, also known as Mpg). Previous work demonstrated that mice treated with the alkylating agent methyl methanesulfonate (MMS) undergo cerebellar degeneration in an Aag-dependent manner, whereby increased BER initiation by Aag causes increased tissue damage that is dependent on activation of poly (ADP-ribose) polymerase 1 (Parp1). Here, we dissect the molecular mechanism of cerebellar granule neuron (CGN) sensitivity to MMS using primary ex vivo neuronal cultures. We first established a high-throughput fluorescent imaging method to assess primary neuron sensitivity to treatment with DNA damaging agents. Next, we verified that the alkylation sensitivity of CGNs is an intrinsic phenotype that accurately recapitulates the in vivo dependency of alkylation-induced CGN cell death on Aag and Parp1 activity. Finally, we show that MMS-induced CGN toxicity is independent of all the cellular events that have previously been associated with Parp-mediated toxicity, including mitochondrial depolarization, AIF translocation, calcium fluxes, and NAD+ consumption. We therefore believe that further investigation is needed to adequately describe all varieties of Parp-mediated cell death.

A literature review of coupled thermal-hydrologic-mechanical-chemical processes pertinent to the proposed high-level nuclear waste repository at Yucca Mountain

International Nuclear Information System (INIS)

Manteufel, R.D.; Ahola, M.P.; Turner, D.R.; Chowdhury, A.H.

1993-07-01

A literature review has been conducted to determine the state of knowledge available in the modeling of coupled thermal (T), hydrologic (H), mechanical (M), and chemical (C) processes relevant to the design and/or performance of the proposed high-level waste (HLW) repository at Yucca Mountain, Nevada. The review focuses on identifying coupling mechanisms between individual processes and assessing their importance (i.e., if the coupling is either important, potentially important, or negligible). The significance of considering THMC-coupled processes lies in whether or not the processes impact the design and/or performance objectives of the repository. A review, such as reported here, is useful in identifying which coupled effects will be important, hence which coupled effects will need to be investigated by the US Nuclear Regulatory Commission in order to assess the assumptions, data, analyses, and conclusions in the design and performance assessment of a geologic reposit''. Although this work stems from regulatory interest in the design of the geologic repository, it should be emphasized that the repository design implicitly considers all of the repository performance objectives, including those associated with the time after permanent closure. The scope of this review is considered beyond previous assessments in that it attempts with the current state-of-knowledge) to determine which couplings are important, and identify which computer codes are currently available to model coupled processes

A literature review of coupled thermal-hydrologic-mechanical-chemical processes pertinent to the proposed high-level nuclear waste repository at Yucca Mountain

Energy Technology Data Exchange (ETDEWEB)

Manteufel, R.D.; Ahola, M.P.; Turner, D.R.; Chowdhury, A.H. [Southwest Research Inst., San Antonio, TX (United States). Center for Nuclear Waste Regulatory Analyses

1993-07-01

A literature review has been conducted to determine the state of knowledge available in the modeling of coupled thermal (T), hydrologic (H), mechanical (M), and chemical (C) processes relevant to the design and/or performance of the proposed high-level waste (HLW) repository at Yucca Mountain, Nevada. The review focuses on identifying coupling mechanisms between individual processes and assessing their importance (i.e., if the coupling is either important, potentially important, or negligible). The significance of considering THMC-coupled processes lies in whether or not the processes impact the design and/or performance objectives of the repository. A review, such as reported here, is useful in identifying which coupled effects will be important, hence which coupled effects will need to be investigated by the US Nuclear Regulatory Commission in order to assess the assumptions, data, analyses, and conclusions in the design and performance assessment of a geologic reposit``. Although this work stems from regulatory interest in the design of the geologic repository, it should be emphasized that the repository design implicitly considers all of the repository performance objectives, including those associated with the time after permanent closure. The scope of this review is considered beyond previous assessments in that it attempts with the current state-of-knowledge) to determine which couplings are important, and identify which computer codes are currently available to model coupled processes.

Kidnapping Detection and Recognition in Previous Unknown Environment

Directory of Open Access Journals (Sweden)

Yang Tian

2017-01-01

Full Text Available An unaware event referred to as kidnapping makes the estimation result of localization incorrect. In a previous unknown environment, incorrect localization result causes incorrect mapping result in Simultaneous Localization and Mapping (SLAM by kidnapping. In this situation, the explored area and unexplored area are divided to make the kidnapping recovery difficult. To provide sufficient information on kidnapping, a framework to judge whether kidnapping has occurred and to identify the type of kidnapping with filter-based SLAM is proposed. The framework is called double kidnapping detection and recognition (DKDR by performing two checks before and after the “update” process with different metrics in real time. To explain one of the principles of DKDR, we describe a property of filter-based SLAM that corrects the mapping result of the environment using the current observations after the “update” process. Two classical filter-based SLAM algorithms, Extend Kalman Filter (EKF SLAM and Particle Filter (PF SLAM, are modified to show that DKDR can be simply and widely applied in existing filter-based SLAM algorithms. Furthermore, a technique to determine the adapted thresholds of metrics in real time without previous data is presented. Both simulated and experimental results demonstrate the validity and accuracy of the proposed method.

Dynamic Self-Healing Mechanism for Transactional Business Process

Directory of Open Access Journals (Sweden)

Yuhai Zhao

2015-01-01

Full Text Available It is clear that transactional behavior consistency is a prerequisite and basis for construction of a reliable services-based business application. However, in previous works, maintaining transactional consistency during exception handling was ignored. Maintaining transactional consistency requires functionality for rolling back some operations and revoking uploaded data. Replacing only the failed service will eventually lead to overall business application failure. In this study, we take fully into account the behavioral consistency of transactional services and propose two effective self-healing mechanisms for service-based applications. If a service enters into potential failure condition, a rescheduling mechanism is triggered to maintain consistent transactional behavior and to ensure reliable execution; if a service fails during execution, the compensation operation is triggered and the system will take action to ensure transactional behavior consistency. Meanwhile, cost-benefit analysis with compensation support is proposed to minimize the dynamic reselection cost. Finally, the experimental analysis shows that the proposed strategies can effectively guarantee the reliability of Web-based applications system.

Dynamic Matching Markets and the Deferred Acceptance Mechanism

DEFF Research Database (Denmark)

Kennes, John; Monte, Daniel; Tumennasan, Norovsambuu

In many dynamic matching markets, priorities depend on previous allocations. In such environments, agents on the proposing side can manipulate the period-by-period deferred acceptance (DA) mechanism. We show that the fraction of agents with incentives to manipulate the DA mechanism approaches zero...... as the market size increases. In addition, we provide a novel al- gorithm to calculate the percentage of markets that can be manipulated. Based on randomly generated data, we find that the DA becomes approximately non-manipulable when the schools capacity reaches 20. Our theoretical and simulation results...... together justify the implementation of the period-by-period DA mechanism in dynamic markets....

Active joint mechanism driven by multiple actuators made of flexible bags: a proposal of dual structural actuator.

Science.gov (United States)

Kimura, Hitoshi; Matsuzaki, Takuya; Kataoka, Mokutaro; Inou, Norio

2013-01-01

An actuator is required to change its speed and force depending on the situation. Using multiple actuators for one driving axis is one of the possible solutions; however, there is an associated problem of output power matching. This study proposes a new active joint mechanism using multiple actuators. Because the actuator is made of a flexible bag, it does not interfere with other actuators when it is depressurized. The proposed joint achieved coordinated motion of multiple actuators. This report also discusses a new actuator which has dual cylindrical structure. The cylinders are composed of flexible bags with different diameters. The joint torque is estimated based on the following factors: empirical formula for the flexible actuator torque, geometric relationship between the joint and the actuator, and the principle of virtual work. The prototype joint mechanism achieves coordinated motion of multiple actuators for one axis. With this motion, small inner actuator contributes high speed motion, whereas large outer actuator generates high torque. The performance of the prototype joint is examined by speed and torque measurements. The joint showed about 30% efficiency at 2.0 Nm load torque under 0.15 MPa air input.

77 FR 58323 - Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel...

Science.gov (United States)

2012-09-20

... Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.) Airplanes AGENCY... Previously Held by Israel Aircraft Industries, Ltd.) Model Gulfstream G150 airplanes. This proposed AD was.... Discussion The Civil Aviation Authority of Israel (CAAI), which is the aviation authority for Israel, has...

A Proposal of a Constitutive Description for Aluminium Alloys in Both Cold and Hot Working

Directory of Open Access Journals (Sweden)

Javier León

2016-10-01

Full Text Available The most important difficulties when the behaviour of a part that is subjected to external mechanical forces is simulated deal with the determination of both the material thermo-mechanical properties and its boundary conditions. The accuracy of the results obtained from the simulation is directly related to the knowledge of the flow stress curve. Therefore, the determination of a material flow rule which is valid for both a wide temperature range and different initial deformation conditions in the starting material presents a great deal of interest when simulation results close to the experimental values are required to be obtained. In this present study, a novel flow stress curve is proposed that is able to accurately predict the behaviour of both materials with no previous accumulated strain and materials that have been previously subjected to severe plastic deformation processes. Moreover, it is possible to use it both for hot and cold working. The results are analysed in a wide test temperature range, which varies from room temperature to 300 °C, and from material previously processed by angular channel extrusion or with no previous strain accumulated. It is shown that the flow rule proposed is effective to model the material behaviour in a wide temperature range and it makes it possible to take the recrystallization phenomena that appear in previously deformed materials into account. In addition, the results obtained are compared with those predicted by other flow rules that exist in the prior literature. Furthermore, the study is complemented with finite element simulations and with a comparison between simulation and experimental results.

Females use self-referent cues to avoid mating with previous mates

OpenAIRE

Ivy, Tracie M; Weddle, Carie B; Sakaluk, Scott K

2005-01-01

Females of many species mate repeatedly throughout their lives, often with many different males (polyandry). Females can secure genetic benefits by maximizing their diversity of mating partners, and might be expected, therefore, to forego matings with previous partners in favour of novel males. Indeed, a female preference for novel mating partners has been shown in several taxa, but the mechanism by which females distinguish between novel males and previous mates remains unknown. We show that...

Modeling and Proposed Molecular Mechanism of Hydroxyurea Through Docking and Molecular Dynamic Simulation to Curtail the Action of Ribonucleotide Reductase.

Science.gov (United States)

Iman, Maryam; Khansefid, Zeynab; Davood, Asghar

2016-01-01

Ribonucleotide Reductase (RNR) is an important anticancer chemotherapy target. It has main key role in DNA synthesis and cell growth. Therefore several RNR inhibitors, such as hydroxyurea, have entered the clinical trials. Based on our proposed mechanism, radical site of RNR protein reacts with hydroxyurea in which hydroxyurea is converted into its oxidized form compound III, and whereby the tyrosyl radical is converted into a normal tyrosine residue. In this study, docking and molecular dynamics simulations were used for proposed molecular mechanism of hydroxyurea in RNR inhibition as anticancer agent. The binding affinity of hydroxyurea and compound III to RNR was studied by docking method. The docking study was performed for the crystal structure of human RNR with the radical scavenger Hydroxyurea and its oxidized form to inhibit the human RNR. hydroxyurea and compound III bind at the active site with Tyr-176, which are essential for free radical formation. This helps to understand the functional aspects and also aids in the development of novel inhibitors for the human RNR2. To confirm the binding mode of inhibitors, the molecular dynamics (MD) simulations were performed using GROMACS 4.5.5, based upon the docked conformation of inhibitors. Both of the studied compounds stayed in the active site. The results of MD simulations confirmed the binding mode of ligands, accuracy of docking and the reliability of active conformations which were obtained by AutoDock. MD studies confirm our proposed mechanism in which compound III reacts with the active site residues specially Tyr-176, and inhibits the radical generation and subsequently inhibits the RNR enzyme.

Proposal for New Experimental Tests of the Bose-Einstein Condensation Mechanism for Low-Energy Nuclear Reaction and Transmutation Processes in Deuterium Loaded - and Nano-Scale Cavities

Science.gov (United States)

Kim, Yeong E.; Koltick, David S.; Reifenberger, Ronald G.; Zubarev, Alexander L.

2006-02-01

Most of experimental results of low-energy nuclear reaction (LENR) reported so far cannot be reproduced on demand. There have been persistent experimental results indicating that the LENR and transmutation processes in condensed matters (LENRTPCM) are surface phenomena rather than bulk phenomena. Recently proposed Bose-Einstein condensation (BEC) mechanism may provide a suitable theoretical description of the surface phenomena. New experiments are proposed and described for testing the BEC mechanism for LENR and transmutation processes in micro- and nano-scale traps. (1) We propose the use of micro- or nano-porous conducting materials as a cathode in electrolysis experiments with heavy water with or without Li in order to stabilize the active surface spots and to enhance the effect for the purpose of improving the reproducibility of excess heat generation and nuclear emission. (2) We propose new experimental tests of the BEC mechanism by measuring the pressure and temperature dependence of LENR events using deuterium gas and these deuterated metals with or without Li. If the LENRTPCM are surface phenomena, the proposed use of micro-/nano-scale porous materials is expected to enhance and scale up the LENRTPCM effects by many order of magnitude, and thus may lead to better reproductivity and theoretical understanding of the phenomena.

Predicting fruit consumption: the role of habits, previous behavior and mediation effects

NARCIS (Netherlands)

de Vries, H.; Eggers, S.M.; Lechner, L.; van Osch, L.; van Stralen, M.M.

2014-01-01

Background: This study assessed the role of habits and previous behavior in predicting fruit consumption as well as their additional predictive contribution besides socio-demographic and motivational factors. In the literature, habits are proposed as a stable construct that needs to be controlled

Mechanical and histological characterization of the abdominal muscle. A previous step to modelling hernia surgery.

Science.gov (United States)

Hernández, B; Peña, E; Pascual, G; Rodríguez, M; Calvo, B; Doblaré, M; Bellón, J M

2011-04-01

The aims of this study are to experimentally characterize the passive elastic behaviour of the rabbit abdominal wall and to develop a mechanical constitutive law which accurately reproduces the obtained experimental results. For this purpose, tissue samples from New Zealand White rabbits 2150±50 (g) were mechanically tested in vitro. Mechanical tests, consisting of uniaxial loading on tissue samples oriented along the craneo-caudal and the perpendicular directions, respectively, revealed the anisotropic non-linear mechanical behaviour of the abdominal tissues. Experiments were performed considering the composite muscle (including external oblique-EO, internal oblique-IO and transverse abdominis-TA muscle layers), as well as separated muscle layers (i.e., external oblique, and the bilayer formed by internal oblique and transverse abdominis). Both the EO muscle layer and the IO-TA bilayer demonstrated a stiffer behaviour along the transversal direction to muscle fibres than along the longitudinal one. The fibre arrangement was measured by means of a histological study which confirmed that collagen fibres are mainly responsible for the passive mechanical strength and stiffness. Furthermore, the degree of anisotropy of the abdominal composite muscle turned out to be less pronounced than those obtained while studying the EO and IO-TA separately. Moreover, a phenomenological constitutive law was used to capture the measured experimental curves. A Levenberg-Marquardt optimization algorithm was used to fit the model constants to reproduce the experimental curves. Copyright © 2010 Elsevier Ltd. All rights reserved.

Design of safety mechanism for an industrial manipulator based on passive compliance

International Nuclear Information System (INIS)

Kim, Hwi Su; Park, Jung Jun; Song, Jae Bok; Kyung, Jin Ho

2010-01-01

In recent years, collision safety between humans and robots has drawn much attention since human-robot cooperation is increasingly needed in various fields. Since positioning accuracy and collision safety are both important, an industrial manipulator should maintain very high stiffness for positioning accuracy in a normal situation, but exhibit very low stiffness when subjected to a collision force greater than the tolerance for human injury. To satisfy these requirements, we proposed in our previous research a safety mechanism composed of a linear spring and a double-slider mechanism for a service robot with a small payload. We modified this device to meet more stringent requirements for an industrial manipulator which usually has a payload higher than a service robot. Several experiments on static and dynamic collisions showed high stiffness of the safety mechanism in response to an external torque that was less than a predetermined threshold torque, but low stiffness that enabled absorption of the collision force when the external torque exceeded the threshold. Thus, positioning accuracy and collision safety were improved using the proposed design. Furthermore, a new safety criterion is suggested to verify the collision safety of a manipulator that uses the proposed safety mechanism

Assessing 15 proposals for promoting innovation and access to medicines globally.

Science.gov (United States)

Hoffman, Steven J; So, Karen

2014-01-01

There is widespread recognition that the existing global systems for innovation and access to medicines need reform. Billions of people do not have access to the medicines they need, and market failures prevent new drugs from being developed for diseases that primarily affect the global poor. The World Health Organization's Consultative Expert Working Group on Research and Development: Financing and Coordination (CEWG) analyzed numerous proposals for reform. The aim of this article is to build on these previous inquiries. We conducted a structured analysis that grouped proposals into five broad opportunities for global policy reform to help researchers and decision makers to meaningfully evaluate each proposal in comparison with similar proposals. Proposals were also analyzed along three important dimensions-potential health impact, financial implications, and political feasibility-further facilitating the comparison and application of this information. Upon analysis, no one solution was deemed a panacea, as many (often competing) considerations need to be taken into account. However, some proposals, particularly product development partnership and prizes, appeared more promising and feasible at this time and deserve further attention. More research is needed into the effectiveness of these mechanisms and their transferability across jurisdictions. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Deep Dyspareunia in Endometriosis: A Proposed Framework Based on Pain Mechanisms and Genito-Pelvic Pain Penetration Disorder.

Science.gov (United States)

Yong, Paul J

2017-10-01

Endometriosis is a common chronic disease affecting 1 in 10 women of reproductive age, with half of women with endometriosis experiencing deep dyspareunia. A review of research studies on endometriosis indicates a need for a validated question or questionnaire for deep dyspareunia. Moreover, placebo-controlled randomized trials have yet to demonstrate a clear benefit for traditional treatments of endometriosis for the outcome of deep dyspareunia. The reason some patients might not respond to traditional treatments is the multifactorial nature of deep dyspareunia in endometriosis, which can include comorbid conditions (eg, interstitial cystitis and bladder pain syndrome) and central sensitization underlying genito-pelvic pain penetration disorder. In general, there is a lack of a framework that integrates these multifactorial causes to provide a standardized approach to deep dyspareunia in endometriosis. To propose a clinical framework for deep dyspareunia based on a synthesis of pain mechanisms with genito-pelvic pain penetration disorder according to the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition. Narrative review after literature search with the terms (endometriosis AND dyspareunia) OR (dyspareunia AND deep) and after analysis of placebo-controlled randomized trials. Deep dyspareunia presence or absence or deep dyspareunia severity on a numeric rating scale or visual analog scale. Four types of deep dyspareunia are proposed in women with endometriosis: type I that is directly due to endometriosis; type II that is related to a comorbid condition; type III in which genito-pelvic pain penetration disorder is primary; and type IV that is secondary to a combination of types I to III. Four types of deep dyspareunia in endometriosis are proposed, which can be used as a framework in research studies and in clinical practice. Research trials could phenotype or stratify patients by each type. The framework also could give rise to more personalized

Females use self-referent cues to avoid mating with previous mates.

Science.gov (United States)

Ivy, Tracie M; Weddle, Carie B; Sakaluk, Scott K

2005-12-07

Females of many species mate repeatedly throughout their lives, often with many different males (polyandry). Females can secure genetic benefits by maximizing their diversity of mating partners, and might be expected, therefore, to forego matings with previous partners in favour of novel males. Indeed, a female preference for novel mating partners has been shown in several taxa, but the mechanism by which females distinguish between novel males and previous mates remains unknown. We show that female crickets (Gryllodes sigillatus) mark males with their own unique chemical signatures during mating, enabling females to recognize prior mates in subsequent encounters and to avoid remating with them. Because self-referent chemosensory cues provide females with a simple, but reliable mechanism of identifying individuals with whom they have mated without requiring any special cognitive ability, they may be a widespread means by which females across a broad range of animal mating systems maximize the genetic benefits of polyandry.

Proposal for new experimental tests of the Bose-Einstein condensation mechanism for low-energy nuclear reaction and transmutation processes in deuterium loaded micro- and nano-scale cavities

International Nuclear Information System (INIS)

Yeong, E. Kim; Koltick, David S.; Reifenberger, Ronald G.; Zubarev, Alexander L.

2006-01-01

Most of experimental results of low-energy nuclear reaction (LENR) reported so far cannot be reproduced on demand. There have been persistent. experimental results indicating that the LENR und transmutation processes in condensed matter (LENRTPCM) are surface phenomena rather than bulk phenomena. Recently, proposed Bose-Einstein condensation (BEC) mechanism may provide a suitable theoretical description of the surface phenomena. New experiments are proposed and described for testing the BEC mechanism for LENR and transmutation processes in micro- and nano-scale traps. (1) We propose the use of micro-or nano-porous conducting materials as a cathode in electrolysis experiments with heavy water with or without Li in order to stabilize the active surface spots and to enhance the effect for the purpose of improving the reproducibility of excess heat generation and nuclear emission. (2) We propose new experimental tests of the BEC mechanism by measuring the pressure and temperature dependence of LENR events using deuterium gas and those deuterated metals with or without Li. If the LENRTPCM are surface phenomena, the proposed use of micro-/nano-scale porous materials is expected to enhance and scale up the LENRTPCM effects by many orders of magnitude, and thus may lead to better reproducibility and theoretical understanding of the phenomena. (authors)

Proposal for new experimental tests of the Bose-Einstein condensation mechanism for low-energy nuclear reaction and transmutation processes in deuterium loaded micro- and nano-scale cavities

Energy Technology Data Exchange (ETDEWEB)

Yeong, E. Kim; Koltick, David S.; Reifenberger, Ronald G.; Zubarev, Alexander L. [Department of Phsysics, Purdue University, West Lafayette, IN 47907 (United States)

2006-07-01

Most of experimental results of low-energy nuclear reaction (LENR) reported so far cannot be reproduced on demand. There have been persistent. experimental results indicating that the LENR und transmutation processes in condensed matter (LENRTPCM) are surface phenomena rather than bulk phenomena. Recently, proposed Bose-Einstein condensation (BEC) mechanism may provide a suitable theoretical description of the surface phenomena. New experiments are proposed and described for testing the BEC mechanism for LENR and transmutation processes in micro- and nano-scale traps. (1) We propose the use of micro-or nano-porous conducting materials as a cathode in electrolysis experiments with heavy water with or without Li in order to stabilize the active surface spots and to enhance the effect for the purpose of improving the reproducibility of excess heat generation and nuclear emission. (2) We propose new experimental tests of the BEC mechanism by measuring the pressure and temperature dependence of LENR events using deuterium gas and those deuterated metals with or without Li. If the LENRTPCM are surface phenomena, the proposed use of micro-/nano-scale porous materials is expected to enhance and scale up the LENRTPCM effects by many orders of magnitude, and thus may lead to better reproducibility and theoretical understanding of the phenomena. (authors)

Mechanism of carrier-induced ferromagnetism in diluted magnetic semiconductors

International Nuclear Information System (INIS)

Takahashi, M.; Furukawa, N.; Kubo, K.

2004-01-01

Using the spin-polarized band obtained by applying the dynamical coherent potential approximation to a simple model, we have calculated the magnetization of Ga x Mn 1-x As as a function of the temperature for various values of carrier density. The result is consistent with the experimental observation, supporting the view previously proposed by us that the ferromagnetism is induced by the carriers in the bandtail through double-exchange-like mechanism

Penfield's prediction: a mechanism for deep brain stimulation

Directory of Open Access Journals (Sweden)

Richard W. Murrow

2014-10-01

Full Text Available (1Context: Despite its widespread use, the precise mechanism of action of Deep Brain Stimulation (DBS therapy remains unknown. The modern urgency to publish more and new data can obscure previously learned lessons by the giants who have preceded us and whose shoulders we now stand upon. Wilder Penfield extensively studied the effects of artificial electrical brain stimulation and his comments on the subject are still very relevant today. In particular, he noted two very different (and seemingly opposite effects of stimulation within the human brain. In some structures, artificial electrical stimulation has an effect which mimics ablation, while, in other structures, it produces a stimulatory effect on that tissue. (2Hypothesis:The hypothesis of this paper is fourfold. First, it proposes that some neural circuits are widely synchronized with other neural circuits, while some neural circuits are unsynchronized and operate independently. Second, it proposes that artificial high frequency electrical stimulation of a synchronized neural circuit results in an ablative effect, but artificial high frequency electrical stimulation of an unsynchronized neural circuit results in a stimulatory effect. Third, it suggests a part of the mechanism by which large scale physiologic synchronization of widely distributed independently processed information streams may occur. This may be the neural mechanism underlying Penfield’s centrencephalic system which he emphasized so many years ago. Fourth, it outlines the specific anatomic distribution of this physiologic synchronization, which Penfield has already clearly delineated as the distribution of his centrencephalic system. (3Evidence:This paper draws on a brief overview of previous theory regarding the mechanism of action of DBS and on historical, as well as widely known modern clinical data regarding the observed effects of stimulation delivered to various targets within the brain. Basic science in

Mechanism of prostatic urethroplasty with balloon catheter

International Nuclear Information System (INIS)

Castaneda, F.; Maynar, M.; Hulbert, J.

1988-01-01

A series of 60 patients have undergone prostatic urethroplasty with balloon catheters at our institution. The follow-up of these patients has ranged from more than 3 years to not less than 6 months. The preliminary results have been excellent, with a success rate of 75% in patients with predominant lateral lobe hypertrophy. This success rate drops to 25% in patients with predominant middle lobe hypertrophy. In previous communications the authors have proposed that the mechanism of prostatic urethral relief of obstruction is due to stretching of the prostatic capsule, tissue compression, and possible subsequent atrophy, as suggested by findings of transrectal US, MR imaging, voiding and retrograde urethrography, and urinary flow studies. Recent clinical information that has led to further animal research has shown that in addition to the previously supposed mechanism of action, separation of the prostatic lobes occurs by splitting of the anterior and posterior commissures of the prostatic gland tissue. This separation of the prostatic lobes is therefore the goal of the procedure. As more experience is gained, the already high success rate can probably be improved

Hormone profile in juvenile systemic lupus erythematosus with previous or current amenorrhea

NARCIS (Netherlands)

Silva, Clovis A.; Deen, Maria E. J.; Febronio, Marilia V.; Oliveira, Sheila K.; Terreri, Maria T.; Sacchetti, Silvana B.; Sztajnbok, Flavio R.; Marini, Roberto; Quintero, Maria V.; Bica, Blanca E.; Pereira, Rosa M.; Bonfa, Eloisa; Ferriani, Virginia P.; Robazzi, Teresa C.; Magalhaes, Claudia S.; Hilario, Maria O.

To identify the underlying mechanism of amenorrhea in juvenile systemic lupus erythematosus (JSLE) patients, thirty-five (11.7%) JSLE patients with current or previous amenorrhea were consecutively selected among the 298 post-menarche patients followed in 12 Brazilian pediatric rheumatology centers.

Structural basis for the catalytic mechanism of a proficient enzyme: Orotidine 5'-Monophosphate Decarboxylase

DEFF Research Database (Denmark)

Harris, Pernille Hanne; Poulsen, Jens-Christian Navarro; Jensen, Kaj Frank

2000-01-01

/ß-barrels with two shared active sites. The orientation of the orotate moiety of the substrate is unambiguously deduced from the structure, and previously proposed catalytic mechanisms involving protonation of O2 or O4 can be ruled out. The proximity of the OMP carboxylate group with Asp71 appears to be instrumental...

Transcriptomic analysis in a Drosophila model identifies previously implicated and novel pathways in the therapeutic mechanism in neuropsychiatric disorders

Directory of Open Access Journals (Sweden)

Priyanka eSingh

2011-03-01

Full Text Available We have taken advantage of a newly described Drosophila model to gain insights into the potential mechanism of antiepileptic drugs (AEDs, a group of drugs that are widely used in the treatment of several neurological and psychiatric conditions besides epilepsy. In the recently described Drosophila model that is inspired by pentylenetetrazole (PTZ induced kindling epileptogenesis in rodents, chronic PTZ treatment for seven days causes a decreased climbing speed and an altered CNS transcriptome, with the latter mimicking gene expression alterations reported in epileptogenesis. In the model, an increased climbing speed is further observed seven days after withdrawal from chronic PTZ. We used this post-PTZ withdrawal regime to identify potential AED mechanism. In this regime, treatment with each of the five AEDs tested, namely, ethosuximide (ETH, gabapentin (GBP, vigabatrin (VGB, sodium valproate (NaVP and levetiracetam (LEV, resulted in rescuing of the altered climbing behavior. The AEDs also normalized PTZ withdrawal induced transcriptomic perturbation in fly heads; whereas AED untreated flies showed a large number of up- and down-regulated genes which were enriched in several processes including gene expression and cell communication, the AED treated flies showed differential expression of only a small number of genes that did not enrich gene expression and cell communication processes. Gene expression and cell communication related upregulated genes in AED untreated flies overrepresented several pathways - spliceosome, RNA degradation, and ribosome in the former category, and inositol phosphate metabolism, phosphatidylinositol signaling, endocytosis and hedgehog signaling in the latter. Transcriptome remodeling effect of AEDs was overall confirmed by microarray clustering that clearly separated the profiles of AED treated and untreated flies. Besides being consistent with previously implicated pathways, our results provide evidence for a role of

Proposal of a high rigidity and high speed rotating mechanism using a new concept hydrodynamic bearing in X-ray tube for high speed computed tomography

International Nuclear Information System (INIS)

Hattori, Hitoshi; Fukushima, Harunobu; Yoshii, Yasuo; Nakamuta, Hironori; Iwase, Mitsuo; Kitade, Koichi

2009-01-01

In this paper, a high rigidity and high speed rotating mechanism using a new concept hydrodynamic bearing in X-ray tube for high speed computed tomography is proposed. In order to obtain both the stability and the high load carrying capacity, the hydrodynamic bearing lubricated by liquid metal (Gallium alloy), named as the hybrid hydrodynamic bearing generates the lubricating film by wedge effect on the plane region between the spiral grooves under high loading condition. The parallelism between the bearing and the rotating body can be secured by optimizing the rigidity distribution of stationary shaft in the proposed rotating mechanism. By carrying out the fundamental design by numerical analyses, it has been made clear that the hybrid hydrodynamic bearing and the rotating mechanism are suitable for the X-ray tube used in the CT with ever-increasingly scanning speed. (author)

A proposal of constitutive creep model for soft rock to be applied to numerical analysis for mechanical interaction in the underground facilities

International Nuclear Information System (INIS)

Sawada, Masataka; Okada, Tetsuji

2005-01-01

In the case that the underground facilities of high-level nuclear waste disposal are constructed in soft rock mass, it is predicted that time-dependent behavior of rock has an important role both on the stability of surrounding rock mass after excavation and on the super long-term stability of barrier system. Existing creep model that has been applied to excavation problems in electric power industry is not sufficient in order to evaluate long-term behavior of the facility constructed in soft rock mass. Therefore, it is necessary to develop an appropriate creep model for soft rock. In this research, we try to develop a prototype of numerical tool for evaluating the stability during and after the excavation and super long-term stability after back-filling. Firstly, a simple rheological model for time-dependent behavior of soft rock is proposed. It is the key feature of this model that two different types of rheological model can be selected in order to describe both failure and non-failure processes. Rock continues to deform until failure in the case where stress applied to the rock exceeds its residual strength, although deformation of the rock finally ceases in the other cases. The applicability of this model is investigated by comparing the calculated results with those in laboratory test results. The proposed model can describe the time-dependent and dilatancy behavior of mudstone of Tertiary period observed in the drained triaxial creep test. Next, we apply the proposed model to the problem of time-dependent behavior of rock mass around a deposition hole. Numerical simulation of excavation problem and long-term mechanical interaction between buffer material and surrounding rock mass is carried out using a hydrological - mechanical coupled FEM code that includes the proposed model. Several mechanical models can be selected in order to apply to the mechanical behavior of materials consisting of underground facility. The main results obtained from this simulation

An adaptive quantum mechanics/molecular mechanics method for the infrared spectrum of water: incorporation of the quantum effect between solute and solvent.

Science.gov (United States)

Watanabe, Hiroshi C; Banno, Misa; Sakurai, Minoru

2016-03-14

Quantum effects in solute-solvent interactions, such as the many-body effect and the dipole-induced dipole, are known to be critical factors influencing the infrared spectra of species in the liquid phase. For accurate spectrum evaluation, the surrounding solvent molecules, in addition to the solute of interest, should be treated using a quantum mechanical method. However, conventional quantum mechanics/molecular mechanics (QM/MM) methods cannot handle free QM solvent molecules during molecular dynamics (MD) simulation because of the diffusion problem. To deal with this problem, we have previously proposed an adaptive QM/MM "size-consistent multipartitioning (SCMP) method". In the present study, as the first application of the SCMP method, we demonstrate the reproduction of the infrared spectrum of liquid-phase water, and evaluate the quantum effect in comparison with conventional QM/MM simulations.

Virus spreading in wireless sensor networks with a medium access control mechanism

International Nuclear Information System (INIS)

Wang Ya-Qi; Yang Xiao-Yuan

2013-01-01

In this paper, an extended version of standard susceptible-infected (SI) model is proposed to consider the influence of a medium access control mechanism on virus spreading in wireless sensor networks. Theoretical analysis shows that the medium access control mechanism obviously reduces the density of infected nodes in the networks, which has been ignored in previous studies. It is also found that by increasing the network node density or node communication radius greatly increases the number of infected nodes. The theoretical results are confirmed by numerical simulations. (general)

Revisiting telegony : Offspring inherit an acquired characteristic of their mother's previous mate

NARCIS (Netherlands)

Crean, Angela J.; Kopps, Anna M.; Bonduriansky, Russell

2014-01-01

Newly discovered non-genetic mechanisms break the link between genes and inheritance, thereby also raising the possibility that previous mating partners could influence traits in offspring sired by subsequent males that mate with the same female (‘telegony’). In the fly Telostylinus angusticollis,

Neurobiochemical mechanisms of a ketogenic diet in refractory epilepsy

Directory of Open Access Journals (Sweden)

Patricia Azevedo de Lima

2014-12-01

Full Text Available A ketogenic diet is an important therapy used in the control of drug-refractory seizures. Many studies have shown that children and adolescents following ketogenic diets exhibit an over 50% reduction in seizure frequency, which is considered to be clinically relevant. These benefits are based on a diet containing high fat (approximately 90% fat for 24 months. This dietary model was proposed in the 1920s and has produced variable clinical responses. Previous studies have shown that the mechanisms underlying seizure control involve ketone bodies, which are produced by fatty acid oxidation. Although the pathways involved in the ketogenic diet are not entirely clear, the main effects of the production of ketone bodies appear to be neurotransmitter modulation and antioxidant effects on the brain. This review highlights the impacts of the ketogenic diet on the modulation of neurotransmitters, levels of biogenic monoamines and protective antioxidant mechanisms of neurons. In addition, future perspectives are proposed.

KSb(OH) samples previously treated with Co y - rays irradiated with neutrons

Energy Technology Data Exchange (ETDEWEB)

Facetti, J F [Asuncion Nacional Univ. (Paraguay). Inst. de Ciencias

1969-01-01

When Ksb (OH) samples previously treated with Co y - rays or crushed are irradiated with neutrons, the yield of Sb and the annealing mechanism are apparently modified by the pretreatment. In addition it is shown that metastable species of Sb are formed under irradiation.

77 FR 5998 - Airworthiness Directives; EADS CASA (Type Certificate Previously Held by Construcciones...

Science.gov (United States)

2012-02-07

... Airworthiness Directives; EADS CASA (Type Certificate Previously Held by Construcciones Aeronauticas, S.A... proposed to correct an unsafe condition for the specified products. The MCAI states: EADS-CASA received... address this condition, EADS-CASA has developed an engine condition control cable P/N 35-56382-0005 with...

Mechanisms for cytoplasmic organization: an overview.

Science.gov (United States)

Pagliaro, L

2000-01-01

One of the basic characteristics of life is the intrinsic organization of cytoplasm, yet we know surprisingly little about the manner in which cytoplasmic macromolecules are arranged. It is clear that cytoplasm is not the homogeneous "soup" it was once envisioned to be, but a comprehensive model for cytoplasmic organization is not available in modern cell biology. The premise of this volume is that phase separation in cytoplasm may play a role in organization at the subcellular level. Other mechanisms for non-membrane-bounded intracellular organization have previously been proposed. Some of these will be reviewed in this chapter. Multiple mechanisms, involving phase separation, specific intracellular targeting, formation of macromolecular complexes, and channeling, all could well contribute to cytoplasmic organization. Temporal and spatial organization, as well as composition, are likely to be important in defining the characteristics of cytoplasm.

Online payload estimation for the control of underactuated mechanical systems

International Nuclear Information System (INIS)

Lu, Yu Sheng; Chiu, Hua Hsu

2014-01-01

This paper presents a payload estimation scheme for underactuated robotic manipulators with passive joints that are not driven by actuators. In the proposed scheme, only the payload, which can be quite uncertain when a robot performs various tasks, is estimated, because the manipulator's electrical and other mechanical parameters are generally known in advance. In comparison to other adaptive schemes for underactuated robotic manipulators, the proposed scheme produces satisfactory transient performance and also reduces the computational burden in real-time implementation. The proposed estimation law is also based on the theory of Variable Structure Systems. In contrast to existing adaptation laws that have an integral form, the proposed law estimates uncertain payload using lowpass filtering of a switching signal that is always bounded, which avoids the parameter-drifting problem that is often encountered when using the previous integral laws. Real-time experiments are conducted using an inverted pendulum and the experimental results demonstrate the feasibility and effectiveness of the proposed scheme.

Experimental study and constitutive modeling of the viscoelastic mechanical properties of the human prolapsed vaginal tissue.

Science.gov (United States)

Peña, Estefania; Calvo, B; Martínez, M A; Martins, P; Mascarenhas, T; Jorge, R M N; Ferreira, A; Doblaré, M

2010-02-01

In this paper, the viscoelastic mechanical properties of vaginal tissue are investigated. Using previous results of the authors on the mechanical properties of biological soft tissues and newly experimental data from uniaxial tension tests, a new model for the viscoelastic mechanical properties of the human vaginal tissue is proposed. The structural model seems to be sufficiently accurate to guarantee its application to prediction of reliable stress distributions, and is suitable for finite element computations. The obtained results may be helpful in the design of surgical procedures with autologous tissue or prostheses.

Multiple bilateral lower limb fractures in a 2-year-old child: previously unreported injury with a unique mechanism

Directory of Open Access Journals (Sweden)

Anuj Jain

2014-10-01

Full Text Available 【Abstract】Fall from height is a common cause of unintentional injuries in children and accounts for 6% of all trauma-related childhood deaths, usually from head injury. We report a case of a 2-year-old child with multiple fractures of the bilateral lower limbs due to this reason. A child fell from a height of around 15 feet after toppling from a alcony. He developed multiple fractures involving the right femoral shaft, right distal femoral epiphysis (Salter Harris type 2, right distal metaphysis of the tibia and fi bula, and undisplaced Salter Harris type 2 epiphyseal injury of the left distal tibia. There were no head, abdominal or spinal injuries. The patient was taken into emergency operation theatre after initial management which consisted of intravenous fl uids, blood transfusion, and splintage of both lower limbs. Fracture of the femoral shaft was treated by closed reduction and fixation using two titanium elastic nails. Distal femoral physeal injury required open eduction and fixation with K wires. Distal tibia fractures were closely reduced and managed nonoperatively in both the lower limbs. All the fractures united in four weeks. At the last follow-up, the child had no disability and was able to perform daily ctivities comfortably. We also proposed the unique mechanism of injury in this report. Key words: Multiple bilateral lower limb fractures; Fall; Child

Post-traumatic stress disorder and head injury as a dual diagnosis: "islands" of memory as a mechanism.

Science.gov (United States)

King, N S

1997-01-01

This case study describes post-traumatic stress disorder (PTSD) and head injury after a road traffic accident involving a pedestrian. Previous studies have proposed two mechanisms by which this dual diagnosis may occur: (1) when post-traumatic amnesia and retrograde amnesia are small or non-existent and (2) when non-declarative memory systems for the traumatic event are in operation. This case study demonstrates a third mechanism--"islands" of memory within post-traumatic amnesia.

78 FR 52872 - Airworthiness Directives; 328 Support Services GmbH (Type Certificate Previously Held by AvCraft...

Science.gov (United States)

2013-08-27

... Services GmbH (Type Certificate Previously Held by AvCraft Aerospace GmbH; Fairchild Dornier GmbH; Dornier... certain 328 Support Services GmbH (Type Certificate Previously Held by AvCraft Aerospace GmbH; Fairchild... send any written relevant data, views, or arguments about this proposed AD. Send your comments to an...

Quantum physics, fuzzy sets and logic steps towards a many-valued interpretation of quantum mechanics

CERN Document Server

Pykacz, Jarosław

2015-01-01

This Brief presents steps towards elaborating a new interpretation of quantum mechanics based on a specific version of Łukasiewicz infinite-valued logic. It begins with a short survey of main interpretations of quantum mechanics already proposed, as well as various models of many-valued logics and previous attempts to apply them for the description of quantum phenomena. The prospective many-valued interpretation of quantum mechanics is soundly based on a theorem concerning the isomorphic representation of Birkhoff-von Neumann quantum logic in the form of a special Łukasiewicz infinite-valued logic endowed with partially defined conjunctions and disjunctions.

Mechanism of laser micro-adjustment

International Nuclear Information System (INIS)

Shen Hong

2008-01-01

Miniaturization is a requirement in engineering to produce competitive products in the field of optical and electronic industries. Laser micro-adjustment is a new and promising technology for sheet metal actuator systems. Efforts have been made to understand the mechanisms of metal plate forming using a laser heating source. Three mechanisms have been proposed for describing the laser forming processes in different scenarios, namely the temperature gradient mechanism (TGM), buckling mechanism and upsetting mechanism (UM). However, none of these mechanisms can fully describe the deformation mechanisms involved in laser micro-adjustment. Based on the thermal and elastoplastic analyses, a coupled TGM and UM are presented in this paper to illustrate the thermal mechanical behaviours of two-bridge actuators when applying a laser forming process. To validate the proposed coupling mechanism, numerical simulations are carried out and the corresponding results demonstrate the mechanism proposed. The mechanism of the micro-laser adjustment could be taken as a supplement to the laser forming process.

On the mechanism of hydrogen-promoted gold-catalyzed CO oxidation

KAUST Repository

Quinet, Elodie

2009-12-10

The kinetics of CO oxidation, H2 oxidation and preferential CO oxidation (PrOx) over Au/Al2O3 catalysts have been investigated. The catalysts with the smallest particles (∼2 nm) are the most active for all three reactions. As previously observed, the presence of H2 greatly promotes CO oxidation, which becomes faster than CO-free H2 oxidation at low temperature. From these results and on the basis of previous works, we propose a complete PrOx mechanism. The reaction involves Au-OOH, Au-OH and Au-H intermediates, also involved in H2 oxidation, and benefits from the presence of low-coordination sites. © 2009 Elsevier Inc. All rights reserved.

On the mechanism of hydrogen-promoted gold-catalyzed CO oxidation

KAUST Repository

Quinet, Elodie; Piccolo, Laurent; Morfin, Franck; Avenier, Priscilla; Diehl, Fabrice; Caps, Valerie; Rousset, Jean Luc

2009-01-01

The kinetics of CO oxidation, H2 oxidation and preferential CO oxidation (PrOx) over Au/Al2O3 catalysts have been investigated. The catalysts with the smallest particles (∼2 nm) are the most active for all three reactions. As previously observed, the presence of H2 greatly promotes CO oxidation, which becomes faster than CO-free H2 oxidation at low temperature. From these results and on the basis of previous works, we propose a complete PrOx mechanism. The reaction involves Au-OOH, Au-OH and Au-H intermediates, also involved in H2 oxidation, and benefits from the presence of low-coordination sites. © 2009 Elsevier Inc. All rights reserved.

Atomistic detailed mechanism and weak cation-conducting activity of HIV-1 Vpu revealed by free energy calculations.

Directory of Open Access Journals (Sweden)

Siladitya Padhi

Full Text Available The viral protein U (Vpu encoded by HIV-1 has been shown to assist in the detachment of virion particles from infected cells. Vpu forms cation-specific ion channels in host cells, and has been proposed as a potential drug target. An understanding of the mechanism of ion transport through Vpu is desirable, but remains limited because of the unavailability of an experimental structure of the channel. Using a structure of the pentameric form of Vpu--modeled and validated based on available experimental data--umbrella sampling molecular dynamics simulations (cumulative simulation time of more than 0.4 µs were employed to elucidate the energetics and the molecular mechanism of ion transport in Vpu. Free energy profiles corresponding to the permeation of Na+ and K+ were found to be similar to each other indicating lack of ion selection, consistent with previous experimental studies. The Ser23 residue is shown to enhance ion transport via two mechanisms: creating a weak binding site, and increasing the effective hydrophilic length of the channel, both of which have previously been hypothesized in experiments. A two-dimensional free energy landscape has been computed to model multiple ion permeation, based on which a mechanism for ion conduction is proposed. It is shown that only one ion can pass through the channel at a time. This, along with a stretch of hydrophobic residues in the transmembrane domain of Vpu, explains the slow kinetics of ion conduction. The results are consistent with previous conductance studies that showed Vpu to be a weakly conducting ion channel.

Some proposed mechanisms for internal cladding corrosion

International Nuclear Information System (INIS)

Bradbury, M.H.; Pickering, S.; Whitlow, W.H.

1977-01-01

In spite of extensive research during recent years, a comprehensive model for internal cladding corrosion in fast reactor oxide fuel pins has not yet been established. In this paper, a model is proposed which accounts for many of the features normally associated with this type of corrosion. The model is composed of a number of parts which describe the chronological sequence of events at the fuel/cladding interface. The corrosion reaction is visualised as being primarily chemical in character, involving the cladding steel, the fuel and the more aggressive fission products, notably caesium in the presence of oxygen. The model attempts to explain how corrosion starts, how it depends on the oxygen potential, why it occurs non-uniformly; also covered are phase changes within the cladding steel and morphological features such as the intergranular form of attack and the distribution of corrosion products in the fuel/cladding gap. (author)

Some proposed mechanisms for internal cladding corrosion

Energy Technology Data Exchange (ETDEWEB)

Bradbury, M H; Pickering, S; Whitlow, W H [EURATOM (United Kingdom)

1977-04-01

In spite of extensive research during recent years, a comprehensive model for internal cladding corrosion in fast reactor oxide fuel pins has not yet been established. In this paper, a model is proposed which accounts for many of the features normally associated with this type of corrosion. The model is composed of a number of parts which describe the chronological sequence of events at the fuel/cladding interface. The corrosion reaction is visualised as being primarily chemical in character, involving the cladding steel, the fuel and the more aggressive fission products, notably caesium in the presence of oxygen. The model attempts to explain how corrosion starts, how it depends on the oxygen potential, why it occurs non-uniformly; also covered are phase changes within the cladding steel and morphological features such as the intergranular form of attack and the distribution of corrosion products in the fuel/cladding gap. (author)

Proposal of measuring the mechanisms of nuclear excitation leading to fission with the ADONE jet-target tagged photon beam

International Nuclear Information System (INIS)

Lucherini, V.; Bianchi, N.; De Sanctis, E.; Guaraldo, C.; Levi Sandri, P.; Muccifora, V.; Polli, E.; Reolon, A.R.; Aiello, S.; De Filippo, E.; Lanzano', G.; Lo Nigro, S.; Milone, C.; Pagano, A.; Botvina, A.S.; Iljinov, A.S.; Mebel, M.V.

1990-01-01

The mechanisms of excitation with subsequent fission of heavy nuclei can be conveniently studied by means of photons, since this probe is able to interact deeply inside the nucleus. We propose the use of the (200-1200 MeV) tagged photon beam from the ADONE Jet Target in order to study the mass-energy and total momentum distributions of fission fragments, to obtain experimental information on the configurations (excitation energy and nucleonic composition) of produced compound nuclei and on their decay channels

Possible health effects of 50/60 Hz electric and magnetic fields: review of proposed mechanisms

International Nuclear Information System (INIS)

Wood, A.W.

1992-01-01

There is inconclusive evidence from both epidemiological and laboratory studies that fields similar to those produced by electrical power transmission lines may contribute to certain diseases including cancer. There are several objections to a hypothesis of a direct causative link, based on identifying a mechanism of interaction. One is that the energy density of the fields is several orders of magnitude smaller than that associated with random thermal motion in biological tissue. Secondly, the induced currents are many times smaller than endogenous currents associated with normal membrane processes. A comparison of current densities and characteristics associated with field-related phenomena such as electro sensitivity in species of fish, night-time melatonin depression in rodents, limb regeneration in amphibians and magnetophosphenes in humans reveals little that can be of use in determining a 'response metric'. Nevertheless, guide-lines for the general public are in fact based on this quantity, for immediate effects at least. Indeed, currents induced by the electric component of environmental 50 Hz fields are of similar magnitude to those induced by the magnetic component, yet epidemiological studies have identified surrogates of the latter as the significant exposure metric in relation to cancer incidence. Proposed mechanisms, many of which are still at the 'working hypothesis' stage, are compared with experimental evidence. Some conflict with epidemiological evidence, itself not strong, but becoming stronger, is apparent. 131 refs., 6 figs

Mechanical problem-solving strategies in Alzheimer's disease and semantic dementia.

Science.gov (United States)

Lesourd, Mathieu; Baumard, Josselin; Jarry, Christophe; Etcharry-Bouyx, Frédérique; Belliard, Serge; Moreaud, Olivier; Croisile, Bernard; Chauviré, Valérie; Granjon, Marine; Le Gall, Didier; Osiurak, François

2016-07-01

The goal of this study was to explore whether the tool-use disorders observed in Alzheimer's disease (AD) and semantic dementia (SD) are of the same nature as those observed in left brain-damaged (LBD) patients. Recent evidence indicates that LBD patients with apraxia of tool use encounter difficulties in solving mechanical problems, characterized by the absence of specific strategies. This pattern may show the presence of impaired mechanical knowledge, critical for both familiar and novel tool use. So, we explored the strategies followed by AD and SD patients in mechanical problem-solving tasks in order to determine whether mechanical knowledge is also impaired in these patients. We used a mechanical problem-solving task in both choice (i.e., several tools were proposed) and no-choice (i.e., only 1 tool was proposed) conditions. We analyzed quantitative data and strategy profiles. AD patients but not SD patients met difficulties in solving mechanical problem-solving tasks. However, the key finding is that AD patients, despite their difficulties, showed strategy profiles that are similar to that of SD patients or controls. Moreover, AD patients exhibited a strategy profile distinct from the one previously observed in LBD patients. Those observations lead us to consider that difficulties met by AD patients to solve mechanical problems or even to use familiar tools may not be caused by mechanical knowledge impairment per se. In broad terms, what we call apraxia of tool use in AD is certainly not the same as apraxia of tool use observed in LBD patients. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Investigations on colour dependent photo induced microactuation effect of FSMA and proposing suitable mechanisms to control the effect

Science.gov (United States)

Bagchi, A.; Sarkar, S.; Mukhopadhyay, P. K.

2018-02-01

Three different coloured focused laser beams were used to study the photo induced microactuation effect found in some ferromagnetic shape memory alloys. Besides trying to uncover the basic causes of this unique and as yet unexplained effect, these studies are to help find other conditions to further characterize the effect for practical use. In this study some mechanisms have been proposed to control the amplitude of actuation of the sample. Control of the actuation of the FSMA sample both linearly with the help of a continuously variable neutral density filter as well periodically with the help of a linear polarizer was achieved. Statistical analysis of the experimental data was also done by applying ANOVA studies on the data to conclusively provide evidence in support of the relationship between the actuation of the sample and the various controlling factors. This study is expected to pave the way to implement this property of the sample in fabricating and operating useful micro-mechanical systems in the near future.

On a proposal of superluminal communication

International Nuclear Information System (INIS)

Ghirardi, GianCarlo; Romano, Raffaele

2012-01-01

Recently, various new proposals of superluminal transmission of information have been suggested in the literature. Since the proposals make systematic use of recent formal and practical improvements in quantum mechanics, the old theorems proving the impossibility of such a performance must be adapted to the new scenario. In this communication, we consider some of the most challenging proposals of this kind and we show why they cannot work. (fast track communication)

An in-pipe mobile micromachine using fluid power. A mechanism adaptable to pipe diameters

International Nuclear Information System (INIS)

Yoshida, Kazuhiro; Yokota, Shinichi; Takahashi, Ken

2000-01-01

To realize micro maintenance robots for small diameter pipes of nuclear reactors and so on, high power in-pipe mobile micromachines have been required. The authors have proposed the bellows microactuator using fluid power and have tried to apply the actuators to in-pipe mobile micromachines. In the previous papers, some inchworm mobile machine prototypes with 25 mm in diameter are fabricated and the traveling performances are experimentally investigated. In this paper, to miniaturize the in-pipe mobile machine and to make it adaptable to pipe diameters, firstly, a simple rubber-tube actuator constrained with a coil-spring is proposed and the static characteristics are investigated. Secondly, a supporting mechanism which utilizes a toggle mechanism and is adaptable to pipe diameters is proposed and the supporting forces are investigated. Finally, an in-pipe mobile micromachine for pipe with 4 - 5 mm in diameter is fabricated and the maximum traveling velocity of 7 mm/s in both ahead and astern movements is experimentally verified. (author)

A novel mechatronic system for measuring end-point stiffness: mechanical design and preliminary tests.

Science.gov (United States)

Masia, L; Sandini, G; Morasso, P G

2011-01-01

Measuring arm stiffness is of great interest for many disciplines from biomechanics to medicine especially because modulation of impedance represents one of the main mechanism underlying control of movement and interaction with external environment. Previous works have proposed different methods to identify multijoint hand stiffness by using planar or even tridimensional haptic devices, but the associated computational burden makes them not easy to implement. We present a novel mechanism conceived for measuring multijoint planar stiffness by a single measurement and in a reduced execution time. A novel mechanical rotary device applies cyclic radial perturbation to human arm of a known displacement and the force is acquired by means of a 6-axes commercial load cell. The outcomes suggest that the system is not only reliable but allows obtaining a bi-dimensional estimation of arm stiffness in reduced amount of time and the results are comparable with those reported in previous researches. © 2011 IEEE

77 FR 15980 - Airworthiness Directives; Alpha Aviation Concept Limited (Type Certificate Previously Held by...

Science.gov (United States)

2012-03-19

... Concept Limited (Type Certificate Previously Held by Alpha Aviation Design Limited) Airplanes AGENCY... rulemaking (NPRM). SUMMARY: We propose to adopt a new airworthiness directive (AD) for Alpha Aviation Concept... condition on an aviation product. The MCAI describes the unsafe condition as oil lines fitted to affected...

76 FR 41432 - Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel...

Science.gov (United States)

2011-07-14

... Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.) Model Galaxy, Gulfstream... proposed AD. Discussion The Civil Aviation Authority (CAA), which is the aviation authority for Israel, has... Held by Israel Aircraft Industries, Ltd.): Docket No. FAA-2011-0716; Directorate Identifier 2011-NM-013...

75 FR 36296 - Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel...

Science.gov (United States)

2010-06-25

... Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel Aircraft... contact we receive about this proposed AD. Discussion The Civil Aviation Authority of Israel (CAAI), which is the aviation authority for Israel, has issued Israeli Airworthiness Directive 01-10-01-07R1, dated...

Aromatherapy and the central nerve system (CNS): therapeutic mechanism and its associated genes.

Science.gov (United States)

Lv, Xiao Nan; Liu, Zhu Jun; Zhang, Huan Jing; Tzeng, Chi Meng

2013-07-01

Molecular medical research on aromatherapy has been steadily increasing for use as an adjuvant therapy in managing psychiatric disorders and to examine its therapeutic mechanisms. Most studies, as well as clinically applied experience, have indicated that various essential oils, such as lavender, lemon and bergamot can help to relieve stress, anxiety, depression and other mood disorders. Most notably, inhalation of essential oils can communicate signals to the olfactory system and stimulate the brain to exert neurotransmitters (e.g. serotonin and dopamine) thereby further regulating mood. However, little research has been done on the molecular mechanisms underlying these effects, thus their mechanism of action remains ambiguous. Several hypotheses have been proposed regarding the therapeutic mechanism of depression. These have mainly centered on possible deficiencies in monoamines, neurotrophins, the neuroendocrine system, c-AMP, cation channels as well as neuroimmune interactions and epigenetics, however the precise mechanism or mechanisms related to depression have yet to be elucidated. In the current study, the effectiveness of aromatherapy for alleviating psychiatric disorders was examined using data collected from previously published studies and our unpublished data. A possible signaling pathway from olfactory system to the central nerve system and the associated key molecular elements of aromatherapy are also proposed.

Conceptual Foundations of Quantum Mechanics:. the Role of Evidence Theory, Quantum Sets, and Modal Logic

Science.gov (United States)

Resconi, Germano; Klir, George J.; Pessa, Eliano

Recognizing that syntactic and semantic structures of classical logic are not sufficient to understand the meaning of quantum phenomena, we propose in this paper a new interpretation of quantum mechanics based on evidence theory. The connection between these two theories is obtained through a new language, quantum set theory, built on a suggestion by J. Bell. Further, we give a modal logic interpretation of quantum mechanics and quantum set theory by using Kripke's semantics of modal logic based on the concept of possible worlds. This is grounded on previous work of a number of researchers (Resconi, Klir, Harmanec) who showed how to represent evidence theory and other uncertainty theories in terms of modal logic. Moreover, we also propose a reformulation of the many-worlds interpretation of quantum mechanics in terms of Kripke's semantics. We thus show how three different theories — quantum mechanics, evidence theory, and modal logic — are interrelated. This opens, on one hand, the way to new applications of quantum mechanics within domains different from the traditional ones, and, on the other hand, the possibility of building new generalizations of quantum mechanics itself.

Universal effect of dynamical reinforcement learning mechanism in spatial evolutionary games

International Nuclear Information System (INIS)

Zhang, Hai-Feng; Wu, Zhi-Xi; Wang, Bing-Hong

2012-01-01

One of the prototypical mechanisms in understanding the ubiquitous cooperation in social dilemma situations is the win–stay, lose–shift rule. In this work, a generalized win–stay, lose–shift learning model—a reinforcement learning model with dynamic aspiration level—is proposed to describe how humans adapt their social behaviors based on their social experiences. In the model, the players incorporate the information of the outcomes in previous rounds with time-dependent aspiration payoffs to regulate the probability of choosing cooperation. By investigating such a reinforcement learning rule in the spatial prisoner's dilemma game and public goods game, a most noteworthy viewpoint is that moderate greediness (i.e. moderate aspiration level) favors best the development and organization of collective cooperation. The generality of this observation is tested against different regulation strengths and different types of network of interaction as well. We also make comparisons with two recently proposed models to highlight the importance of the mechanism of adaptive aspiration level in supporting cooperation in structured populations

Use of the mechanical leech for successful zone I replantation.

Science.gov (United States)

Kim, Sang Wha; Han, Hyun Ho; Jung, Sung-No

2014-01-01

Replantation of zone I finger injuries remains a challenge, particularly if the fingertip was previously scarred or atrophied, which makes it difficult to secure a suitable vein at the amputation site. In cases of artery-only anastomosis, we propose using a mechanical leech technique to maintain sufficient venous outflow until the internal circulation regenerates. We applied this procedure to eight patients who had zone 1 amputations without veins that were suitable for anastomosis. Emergent surgery was performed and an artery-only anastomosis was created. As there were no veins available, we cut a branch of the central artery and anastomosed it with a 24-gauge angioneedle, which served as a conduit for venous drainage. The overall survival rate for zone I replantation using mechanical leech was 87.5% and the average time to maintain the mechanical leech was 5 days. The mechanical leech technique may serve as an alternative option for the management of venous congestion when no viable veins are available.

Use of the Mechanical Leech for Successful Zone I Replantation

Directory of Open Access Journals (Sweden)

Sang Wha Kim

2014-01-01

Full Text Available Replantation of zone I finger injuries remains a challenge, particularly if the fingertip was previously scarred or atrophied, which makes it difficult to secure a suitable vein at the amputation site. In cases of artery-only anastomosis, we propose using a mechanical leech technique to maintain sufficient venous outflow until the internal circulation regenerates. We applied this procedure to eight patients who had zone 1 amputations without veins that were suitable for anastomosis. Emergent surgery was performed and an artery-only anastomosis was created. As there were no veins available, we cut a branch of the central artery and anastomosed it with a 24-gauge angioneedle, which served as a conduit for venous drainage. The overall survival rate for zone I replantation using mechanical leech was 87.5% and the average time to maintain the mechanical leech was 5 days. The mechanical leech technique may serve as an alternative option for the management of venous congestion when no viable veins are available.

Explore the reaction mechanism of the Maillard reaction: a density functional theory study.

Science.gov (United States)

Ren, Ge-Rui; Zhao, Li-Jiang; Sun, Qiang; Xie, Hu-Jun; Lei, Qun-Fang; Fang, Wen-Jun

2015-05-01

The mechanism of Maillard reaction has been investigated by means of density functional theory calculations in the gaseous phase and aqueous solution. The Maillard reaction is a cascade of consecutive and parallel reaction. In the present model system study, glucose and glycine were taken as the initial reactants. On the basis of previous experimental results, the mechanisms of Maillard reaction have been proposed, and the possibility for the formation of different compounds have been evaluated through calculating the relative energy changes for different steps of reaction under different pH conditions. Our calculations reveal that the TS3 in Amadori rearrangement reaction is the rate-determining step of Maillard reaction with the activation barriers of about 66.7 and 68.8 kcal mol(-1) in the gaseous phase and aqueous solution, respectively. The calculation results are in good agreement with previous studies and could provide insights into the reaction mechanism of Maillard reaction, since experimental evaluation of the role of intermediates in the Maillard reaction is quite complicated.

Simultaneous Measurement of Multiple Mechanical Properties of Single Cells Using AFM by Indentation and Vibration.

Science.gov (United States)

Zhang, Chuang; Shi, Jialin; Wang, Wenxue; Xi, Ning; Wang, Yuechao; Liu, Lianqing

2017-12-01

The mechanical properties of cells, which are the main characteristics determining their physical performance and physiological functions, have been actively studied in the fields of cytobiology and biomedical engineering and for the development of medicines. In this study, an indentation-vibration-based method is proposed to simultaneously measure the mechanical properties of cells in situ, including cellular mass (m), elasticity (k), and viscosity (c). The proposed measurement method is implemented based on the principle of forced vibration stimulated by simple harmonic force using an atomic force microscope (AFM) system integrated with a piezoelectric transducer as the substrate vibrator. The corresponding theoretical model containing the three mechanical properties is derived and used to perform simulations and calculations. Living and fixed human embryonic kidney 293 (HEK 293) cells were subjected to indentation and vibration to measure and compare their mechanical parameters and verify the proposed approach. The results that the fixed sample cells are more viscous and elastic than the living sample cells and the measured mechanical properties of cell are consistent within, but not outside of the central region of the cell, are in accordance with the previous studies. This work provides an approach to simultaneous measurement of the multiple mechanical properties of single cells using an integrated AFM system based on the principle force vibration and thickness-corrected Hertz model. This study should contribute to progress in biomedical engineering, cytobiology, medicine, early diagnosis, specific therapy and cell-powered robots.

Quantum mechanics of time travel through post-selected teleportation

International Nuclear Information System (INIS)

Lloyd, Seth; Garcia-Patron, Raul; Maccone, Lorenzo; Giovannetti, Vittorio; Shikano, Yutaka

2011-01-01

This paper discusses the quantum mechanics of closed-timelike curves (CTCs) and of other potential methods for time travel. We analyze a specific proposal for such quantum time travel, the quantum description of CTCs based on post-selected teleportation (P-CTCs). We compare the theory of P-CTCs to previously proposed quantum theories of time travel: the theory is inequivalent to Deutsch's theory of CTCs, but it is consistent with path-integral approaches (which are the best suited for analyzing quantum-field theory in curved space-time). We derive the dynamical equations that a chronology-respecting system interacting with a CTC will experience. We discuss the possibility of time travel in the absence of general-relativistic closed-timelike curves, and investigate the implications of P-CTCs for enhancing the power of computation.

Atmospheric oxidation mechanism of toluene.

Science.gov (United States)

Wu, Runrun; Pan, Shanshan; Li, Yun; Wang, Liming

2014-06-26

The atmospheric oxidation mechanism of toluene initiated by OH radical addition is investigated by quantum chemistry calculations at M06-2X, G3MP2-RAD, and ROCBS-QB3 levels and by kinetics calculation by using transition state theory and unimolecular reaction theory coupled with master equation (RRKM-ME). The predicted branching ratios are 0.15, 0.59, 0.05, and 0.14 for OH additions to ipso, ortho, meta, and para positions (forming R1-R4 adducts), respectively. The fate of R2, R4, and R1 is investigated in detail. In the atmosphere, R2 reacts with O2 either by irreversible H-abstraction to form o-cresol (36%), or by reversible recombination to R2-1OO-syn and R2-3OO-syn, which subsequently cyclize to bicyclic radical R2-13OO-syn (64%). Similarly, R4 reacts with O2 with branching ratios of 61% for p-cresol and 39% for R4-35OO-syn, while reaction of R1 and O2 leads to R1-26OO-syn. RRKM-ME calculations show that the reactions of R2/R4 with O2 have reached their high-pressure limits at 760 Torr and the formation of R2-16O-3O-s is only important at low pressure, i.e., 5.4% at 100 Torr. The bicyclic radicals (R2-13OO-syn, R4-35OO-syn, and R1-26OO-syn) will recombine with O2 to produce bicyclic alkoxy radicals after reacting with NO. The bicyclic alkoxy radicals would break the ring to form products methylglyoxal/glyoxal (MGLY/GLY) and their corresponding coproducts butenedial/methyl-substituted butenedial as proposed in earlier studies. However, a new reaction pathway is found for the bicyclic alkoxy radicals, leading to products MGLY/GLY and 2,3-epoxybutandial/2-methyl-2,3-epoxybutandial. A new mechanism is proposed for the atmospheric oxidation mechanism of toluene based on current theoretical and previous theoretical and experimental results. The new mechanism predicts much lower yield of GLY and much higher yield of butenedial than other atmospheric models and recent experimental measurements. The new mechanism calls for detection of proposed products 2

Manufacturing of Nanostructured Rings from Previously ECAE-Processed AA5083 Alloy by Isothermal Forging

Directory of Open Access Journals (Sweden)

C. J. Luis

2013-01-01

Full Text Available The manufacturing of a functional hollow mechanical element or ring of the AA5083 alloy previously equal channel angular extrusion (ECAE processed, which presents a submicrometric microstructure, is dealt with. For this purpose, the design of two isothermal forging dies (preform and final shape is carried out using the design of experiments (DOE methodology. Moreover, after manufacturing the dies and carrying out tests so as to achieve real rings, the mechanical properties of these rings are analysed as well as their microstructure. Furthermore, a comparison between the different forged rings is made from ECAE-processed material subjected to different heat treatments, previous to the forging stage. On the other hand, the ring forging process is modelled through the use of finite element simulation in order to improve the die design and to study the force required for the isothermal forging, the damage value, and the strain the material predeformed by ECAE has undergone. With this present research work, it is intended to improve the knowledge about the mechanical properties of nanostructured material and the applicability of this material to industrial processes that allow the manufacturing of functional parts.

The Commission's proposal for a Directive on Double Taxation Dispute Resolution Mechanisms:Overcoming the final hurdle of juridical double taxation within the European Union?

OpenAIRE

Cerioni, Luca

2017-01-01

This article examines the Commission’s proposal for a Directive on Double Taxation Dispute Resolution Mechanisms, by highlighting interpretative issues that its wording may arise and by discussing the conditions under which it could manage to lead to the elimination of (juridical) double taxation within the EU.

Compliant Space Mechanisms

Data.gov (United States)

National Aeronautics and Space Administration — OBJECTIVES The proposed research will combine the areas of compliant mechanisms and space technology. Compliant mechanisms perform their function through the elastic...

Electric utility engineer`s FGD manual -- Volume 2: Major mechanical equipment; FGD proposal evaluations; Use of FGDPRISM in FGD system modification, proposal, evaluation, and design; FGD system case study. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-04

Part 2 of this manual provides the electric utility engineer with detailed technical information on some of the major mechanical equipment used in the FGD system. The objectives of Part 2 are the following: to provide the electric utility engineer with information on equipment that may be unfamiliar to him, including ball mills, vacuum filters, and mist eliminators; and to identify the unique technique considerations imposed by an FGD system on more familiar electric utility equipment such as fans, gas dampers, piping, valves, and pumps. Part 3 provides an overview of the recommended procedures for evaluating proposals received from FGD system vendors. The objectives are to provide procedures for evaluating the technical aspects of proposals, and to provide procedures for determining the total costs of proposals considering both initial capital costs and annual operating and maintenance costs. The primary objective of Part 4 of this manual is to provide the utility engineer who has a special interest in the capabilities of FGDPRISM [Flue Gas Desulfurization PRocess Integration and Simulation Model] with more detailed discussions of its uses, requirements, and limitations. Part 5 is a case study in using this manual in the preparation of a purchase specification and in the evaluation of proposals received from vendors. The objectives are to demonstrate how the information contained in Parts 1 and 2 can be used to improve the technical content of an FGD system purchase specification; to demonstrate how the techniques presented in Part 3 can be used to evaluate proposals received in response to the purchase specification; and to illustrate how the FGDPRISM computer program can be used to establish design parameters for the specification and evaluate vendor designs.

Reconstructing and deconstructing the self: Cognitive mechanisms in meditation practice

Science.gov (United States)

Dahl, Cortland J.; Lutz, Antoine; Davidson, Richard J.

2015-01-01

Scientific research highlights the central role of specific psychological processes, in particular those related to the self, in various forms of human suffering and flourishing. This view is shared by Buddhism and other contemplative and humanistic traditions, which have developed meditation practices to regulate these processes. Building on a previous paper in this journal, we propose a novel classification system that categorizes specific styles of meditation into attentional, constructive, and deconstructive families based on their primary cognitive mechanisms. We suggest that meta-awareness, perspective taking and cognitive reappraisal, and self-inquiry may be important mechanisms in specific families of meditation and that alterations in these processes may be used to target states of experiential fusion, maladaptive self-schema, and cognitive reification. PMID:26231761

Security Mechanism Based on Hospital Authentication Server for Secure Application of Implantable Medical Devices

Science.gov (United States)

2014-01-01

After two recent security attacks against implantable medical devices (IMDs) have been reported, the privacy and security risks of IMDs have been widely recognized in the medical device market and research community, since the malfunctioning of IMDs might endanger the patient's life. During the last few years, a lot of researches have been carried out to address the security-related issues of IMDs, including privacy, safety, and accessibility issues. A physician accesses IMD through an external device called a programmer, for diagnosis and treatment. Hence, cryptographic key management between IMD and programmer is important to enforce a strict access control. In this paper, a new security architecture for the security of IMDs is proposed, based on a 3-Tier security model, where the programmer interacts with a Hospital Authentication Server, to get permissions to access IMDs. The proposed security architecture greatly simplifies the key management between IMDs and programmers. Also proposed is a security mechanism to guarantee the authenticity of the patient data collected from IMD and the nonrepudiation of the physician's treatment based on it. The proposed architecture and mechanism are analyzed and compared with several previous works, in terms of security and performance. PMID:25276797

Security mechanism based on Hospital Authentication Server for secure application of implantable medical devices.

Science.gov (United States)

Park, Chang-Seop

2014-01-01

After two recent security attacks against implantable medical devices (IMDs) have been reported, the privacy and security risks of IMDs have been widely recognized in the medical device market and research community, since the malfunctioning of IMDs might endanger the patient's life. During the last few years, a lot of researches have been carried out to address the security-related issues of IMDs, including privacy, safety, and accessibility issues. A physician accesses IMD through an external device called a programmer, for diagnosis and treatment. Hence, cryptographic key management between IMD and programmer is important to enforce a strict access control. In this paper, a new security architecture for the security of IMDs is proposed, based on a 3-Tier security model, where the programmer interacts with a Hospital Authentication Server, to get permissions to access IMDs. The proposed security architecture greatly simplifies the key management between IMDs and programmers. Also proposed is a security mechanism to guarantee the authenticity of the patient data collected from IMD and the nonrepudiation of the physician's treatment based on it. The proposed architecture and mechanism are analyzed and compared with several previous works, in terms of security and performance.

Manganese mediated oxidation of progesterone in alkaline medium: Mechanism study and quantitative determination

International Nuclear Information System (INIS)

Shamsipur, Mojtaba; Pashabadi, Afshin; Taherpour, Avat; Bahrami, Kiumars; Sharghi, Hashem

2017-01-01

Highlights: • This is first report on oxidation of progesterone in alkaline medium using a new manganese (III) Schiff base complex. • Utilizing QM and MM, we modelled and interpreted the observed electrochemical behavior of complex on carbon and gold materials as platform. • The long term stability of proposed sensor is improved relative to previously reported immunosensors for P4. • A detailed mechanism was developed for the oxidation of P4. • The proposed sensor was applied to quantify P4 in cow’s milk. - Abstract: We report here a non-immunosensing approach for the electrocatalytic oxidation of progesterone (P4) in alkaline medium using a salen-type manganese Schiff base complex (Mn(III)-SB) as a suitable electrocatalyst. We explored the role of carbon surface at glassy carbon electrode (GCE) and gold surface at glassy carbon/gold nanoparticles modified electrode (GCE/AuNPs) on immobilization of the Mn(III)-SB complex using cyclic voltammetry (CV) and density functional theory (DFT) calculations. The GCE/Mn(III)-SB displayed a pair of small redox peaks attributed to Mn(II) ⇄ Mn(III) with a small peak-to-peak separation (ΔE p ), while GCE/AuNP/Mn(III)-SB displayed redox peaks with larger densities, but with a wider ΔE p . A combined molecular mechanics (MM) and quantum mechanics (QM) study were carried out to investigate the variation of surface configuration and energy barrier, when the Mn(III)-SB immobilization was modeled on GCE and GCE/Au surface. Cyclic voltammetry and hydrodynamic amperometry were used for the quantitative determination of P4. A limit of detection (LOD) of 11.4 nM was obtained using amperometry. The sensor retained 91% of its original response after 3 months, which is improved compared to previously reported P4 immunosensors. For the first time, a detailed mechanism for oxidation of P4 in alkaline medium was suggested. The proposed sensor was utilized to determine progesterone in milk samples.

A proposed mechanism for investigating the effect of porous silicon buffer layer on TiO{sub 2} nanorods growth

Energy Technology Data Exchange (ETDEWEB)

Rahmani, N. [Department of Physics, Alzahra University, Tehran, 1993893973 (Iran, Islamic Republic of); Dariani, R.S., E-mail: dariani@alzahra.ac.ir [Department of Physics, Alzahra University, Tehran, 1993893973 (Iran, Islamic Republic of); Rajabi, M. [Deparment of Advanced Materials and Renewable Energies, Iranian Research Organization for Science and Technology (IROST), Tehran 3353136846 (Iran, Islamic Republic of)

2016-03-15

Graphical abstract: - Highlights: • TiO{sub 2} nanorods (NRs) are synthesized on silicon and porous silicon (PS) substrates by hydrothermal method. • TiO{sub 2} NRs grown on PS substrates have a better growth compared to those grown on silicon. • Also increasing substrate porosity leads to an increase in density of the NRs. • We proposed a growth mechanism to explain how can control the local surface chemical potential. - Abstract: In this study, we have synthesized TiO{sub 2} nanorods (NRs) on silicon and porous silicon (PS) substrates by hydrothermal method. The PS substrates with different porosities were fabricated by electrochemical anodization on silicon. According to the field emission electron microscopy images, TiO{sub 2} NRs grown on PS substrates have a better growth compared to those grown on silicon. Also increasing substrate porosity leads to an increase in density of the NRs. Atomic force microscopy observation demonstrates that porous layer formation due to etching of silicon surface leads to an increase of its roughness. Results indicate surface roughness evolution with porosity increasing enhances TiO{sub 2} nucleation on substrate and thus increases TiO{sub 2} NRs density. We propose a growth mechanism to explain how we can control the local surface chemical potential and thus the nucleation and alignment of TiO{sub 2} NRs by surface roughness variation. Also, photoluminescence studies show a red-shift in band gap energy of NRs compared to that of common bulk TiO{sub 2}.

Mechanisms for catalytic carbon nanofiber growth studied by ab initio density functional theory calculations

DEFF Research Database (Denmark)

Abild-Pedersen, Frank; Nørskov, Jens Kehlet; Rostrup-Nielsen, Jens

2006-01-01

Mechanisms and energetics of graphene growth catalyzed by nickel nanoclusters were studied using ab initio density functional theory calculations. It is demonstrated that nickel step-edge sites act as the preferential growth centers for graphene layers on the nickel surface. Carbon is transported......, and it is argued how these processes may lead to different nanofiber structures. The proposed growth model is found to be in good agreement with previous findings....

HEART TRANSPLANTATION IN PATIENTS WITH PREVIOUS OPEN HEART SURGERY

Directory of Open Access Journals (Sweden)

R. Sh. Saitgareev

2016-01-01

Full Text Available Heart Transplantation (HTx to date remains the most effective and radical method of treatment of patients with end-stage heart failure. The defi cit of donor hearts is forcing to resort increasingly to the use of different longterm mechanical circulatory support systems, including as a «bridge» to the follow-up HTx. According to the ISHLT Registry the number of recipients underwent cardiopulmonary bypass surgery increased from 40% in the period from 2004 to 2008 to 49.6% for the period from 2009 to 2015. HTx performed in repeated patients, on the one hand, involves considerable technical diffi culties and high risks; on the other hand, there is often no alternative medical intervention to HTx, and if not dictated by absolute contradictions the denial of the surgery is equivalent to 100% mortality. This review summarizes the results of a number of published studies aimed at understanding the immediate and late results of HTx in patients, previously underwent open heart surgery. The effect of resternotomy during HTx and that of the specifi c features associated with its implementation in recipients previously operated on open heart, and its effects on the immediate and long-term survival were considered in this review. Results of studies analyzing the risk factors for perioperative complications in repeated recipients were also demonstrated. Separately, HTx risks after implantation of prolonged mechanical circulatory support systems were examined. The literature does not allow to clearly defi ning the impact factor of earlier performed open heart surgery on the course of perioperative period and on the prognosis of survival in recipients who underwent HTx. On the other hand, subject to the regular fl ow of HTx and the perioperative period the risks in this clinical situation are justifi ed as a long-term prognosis of recipients previously conducted open heart surgery and are comparable to those of patients who underwent primary HTx. Studies

A Proposed Molecular Mechanism of High-Dose Vitamin D3 Supplementation in Prevention and Treatment of Preeclampsia.

Science.gov (United States)

Zabul, Piotr; Wozniak, Michal; Slominski, Andrzej T; Preis, Krzysztof; Gorska, Magdalena; Korozan, Marek; Wieruszewski, Jan; Zmijewski, Michal A; Zabul, Ewa; Tuckey, Robert; Kuban-Jankowska, Alicja; Mickiewicz, Wieslawa; Knap, Narcyz

2015-06-09

A randomized prospective clinical study performed on a group of 74 pregnant women (43 presenting with severe preeclampsia) proved that urinary levels of 15-F(2t)-isoprostane were significantly higher in preeclamptic patients relative to the control (3.05 vs. 2.00 ng/mg creatinine). Surprisingly enough, plasma levels of 25-hydroxyvitamin D3 in both study groups were below the clinical reference range with no significant difference between the groups. In vitro study performed on isolated placental mitochondria and placental cell line showed that suicidal self-oxidation of cytochrome P450scc may lead to structural disintegration of heme, potentially contributing to enhancement of oxidative stress phenomena in the course of preeclampsia. As placental cytochrome P450scc pleiotropic activity is implicated in the metabolism of free radical mediated arachidonic acid derivatives as well as multiple Vitamin D3 hydroxylations and progesterone synthesis, we propose that Vitamin D3 might act as a competitive inhibitor of placental cytochrome P450scc preventing the production of lipid peroxides or excess progesterone synthesis, both of which may contribute to the etiopathogenesis of preeclampsia. The proposed molecular mechanism is in accord with the preliminary clinical observations on the surprisingly high efficacy of high-dose Vitamin D3 supplementation in prevention and treatment of preeclampsia.

A Truthful Incentive Mechanism for Online Recruitment in Mobile Crowd Sensing System

Directory of Open Access Journals (Sweden)

Xiao Chen

2017-01-01

Full Text Available We investigate emerging mobile crowd sensing (MCS systems, in which new cloud-based platforms sequentially allocate homogenous sensing jobs to dynamically-arriving users with uncertain service qualities. Given that human beings are selfish in nature, it is crucial yet challenging to design an efficient and truthful incentive mechanism to encourage users to participate. To address the challenge, we propose a novel truthful online auction mechanism that can efficiently learn to make irreversible online decisions on winner selections for new MCS systems without requiring previous knowledge of users. Moreover, we theoretically prove that our incentive possesses truthfulness, individual rationality and computational efficiency. Extensive simulation results under both real and synthetic traces demonstrate that our incentive mechanism can reduce the payment of the platform, increase the utility of the platform and social welfare.

A Truthful Incentive Mechanism for Online Recruitment in Mobile Crowd Sensing System.

Science.gov (United States)

Chen, Xiao; Liu, Min; Zhou, Yaqin; Li, Zhongcheng; Chen, Shuang; He, Xiangnan

2017-01-01

We investigate emerging mobile crowd sensing (MCS) systems, in which new cloud-based platforms sequentially allocate homogenous sensing jobs to dynamically-arriving users with uncertain service qualities. Given that human beings are selfish in nature, it is crucial yet challenging to design an efficient and truthful incentive mechanism to encourage users to participate. To address the challenge, we propose a novel truthful online auction mechanism that can efficiently learn to make irreversible online decisions on winner selections for new MCS systems without requiring previous knowledge of users. Moreover, we theoretically prove that our incentive possesses truthfulness, individual rationality and computational efficiency. Extensive simulation results under both real and synthetic traces demonstrate that our incentive mechanism can reduce the payment of the platform, increase the utility of the platform and social welfare.

Distinction between added-energy and phase-resetting mechanisms in non-invasively detected somatosensory evoked responses.

Science.gov (United States)

Fedele, T; Scheer, H-J; Burghoff, M; Waterstraat, G; Nikulin, V V; Curio, G

2013-01-01

Non-invasively recorded averaged event-related potentials (ERP) represent a convenient opportunity to investigate human brain perceptive and cognitive processes. Nevertheless, generative ERP mechanisms are still debated. Two previous approaches have been contested in the past: the added-energy model in which the response raises independently from the ongoing background activity, and the phase-reset model, based on stimulus-driven synchronization of oscillatory ongoing activity. Many criteria for the distinction of these two models have been proposed, but there is no definitive methodology to disentangle them, owing also to the limited information at the single trial level. Here, we propose a new approach combining low-noise EEG technology and multivariate decomposition techniques. We present theoretical analyses based on simulated data and identify in high-frequency somatosensory evoked responses an optimal target for the distinction between the two mechanisms.

PACMan to Help Sort Hubble Proposals

Science.gov (United States)

Kohler, Susanna

2017-04-01

Every year, astronomers submit over a thousand proposals requesting time on the Hubble Space Telescope (HST). Currently, humans must sort through each of these proposals by hand before sending them off for review. Could this burden be shifted to computers?A Problem of VolumeAstronomer Molly Peeples gathered stats on the HST submissions sent in last week for the upcoming HST Cycle 25 (the deadline was Friday night), relative to previous years. This years proposal round broke the record, with over 1200 proposals submitted in total for Cycle 25. [Molly Peeples]Each proposal cycle for HST time attracts on the order of 1100 proposals accounting for far more HST time than is available. The proposals are therefore carefully reviewed by around 150 international members of the astronomy community during a six-month process to select those with the highest scientific merit.Ideally, each proposal will be read by reviewers that have scientific expertise relevant to the proposal topic: if a proposal requests HST time to study star formation, for instance, then the reviewers assigned to it should have research expertise in star formation.How does this matching of proposals to reviewers occur? The current method relies on self-reported categorization of the submitted proposals. This is unreliable, however; proposals are often mis-categorized by submitters due to misunderstanding or ambiguous cases.As a result, the Science Policies Group at the Space Telescope Science Institute (STScI) which oversees the review of HST proposals must go through each of the proposals by hand and re-categorize them. The proposals are then matched to reviewers with self-declared expertise in the same category.With the number of HST proposals on the rise and the expectation that the upcoming James Webb Space Telescope (JWST) will elicit even more proposals for time than Hubble scientists at STScI and NASA are now asking: could the human hours necessary for this task be spared? Could a computer program

Order information coding in working memory: Review of behavioural studies and cognitive mechanisms

Directory of Open Access Journals (Sweden)

Barbara Dolenc

2014-06-01

Full Text Available Executive processes, such as coding for sequential order, are of extreme importance for higher-order cognitive tasks. One of the significant questions is, how order information is coded in working memory and what cognitive mechanisms and processes mediate it. The aim of this review paper is to summarize results of studies that explore whether order and item memory are two separable processes. Furthermore, we reviewed evidence for each of the proposed cognitive mechanism that might mediate order processing. Previous behavioural and neuroimaging data suggest different representation and processing of item and order information in working memory. Both information are maintained and recalled separately and this separation seems to hold for recognition as well as for recall. To explain the result of studies of order coding, numerous cognitive mechanisms were proposed. We focused on four different mechanisms by which order information might be coded and retrieved, namely inter-item associations, direct coding, hierarchical coding and magnitude coding. Each of the mechanisms can explain some of the aspect of order information coding, however none of them is able to explain all of the empirical findings. Due to its complex nature it is not surprising that a single mechanism has difficulties accounting for all the behavioral data and order memory may be more accurately characterized as the result of a set of mechanisms rather than a single one. Moreover, the findings beget a question of whether different types of memory for order information might exist.

Differential Evolution Algorithm with Self-Adaptive Population Resizing Mechanism

Directory of Open Access Journals (Sweden)

Xu Wang

2013-01-01

Full Text Available A differential evolution (DE algorithm with self-adaptive population resizing mechanism, SapsDE, is proposed to enhance the performance of DE by dynamically choosing one of two mutation strategies and tuning control parameters in a self-adaptive manner. More specifically, more appropriate mutation strategies along with its parameter settings can be determined adaptively according to the previous status at different stages of the evolution process. To verify the performance of SapsDE, 17 benchmark functions with a wide range of dimensions, and diverse complexities are used. Nonparametric statistical procedures were performed for multiple comparisons between the proposed algorithm and five well-known DE variants from the literature. Simulation results show that SapsDE is effective and efficient. It also exhibits much more superiorresultsthan the other five algorithms employed in the comparison in most of the cases.

DAPs: Deep Action Proposals for Action Understanding

KAUST Repository

Escorcia, Victor

2016-09-17

Object proposals have contributed significantly to recent advances in object understanding in images. Inspired by the success of this approach, we introduce Deep Action Proposals (DAPs), an effective and efficient algorithm for generating temporal action proposals from long videos. We show how to take advantage of the vast capacity of deep learning models and memory cells to retrieve from untrimmed videos temporal segments, which are likely to contain actions. A comprehensive evaluation indicates that our approach outperforms previous work on a large scale action benchmark, runs at 134 FPS making it practical for large-scale scenarios, and exhibits an appealing ability to generalize, i.e. to retrieve good quality temporal proposals of actions unseen in training.

Plant life extension and ageing mechanisms: an ANSALDO proposal for the application to Kozloduy NPPs

International Nuclear Information System (INIS)

Orlandi, S.; Macco, A.; Zanaboni, P.

1999-01-01

In the frame of extension of NPP's installations lifetime, ageing management has become a topical subject to obtain the items: - Evaluation of residual life of the plant through the investigation of the residual life of well identified Safety Related Equipment in the as built configuration; - Organization of identified representative equipment per typological Classes (as Piping Systems, Tanks, Valves, Pumps, Electrical Equipment, Pressurized Components) in order to define for each High Level Class a set of elementary families capable to have, within each family, a common ageing mechanism and methodological investigation and potential common on-line monitoring; Application of a consistent methodology for residual life evaluation at each High Level Class (and subsequent elementary family and group if any) in order to assess an integral approach to backfitting and ageing management, taking also into account the economical investment effort required to the utility. In this report, a technical proposal for the application of the ANSALDO standard methodology approach, applied to the re-evaluation of the Kozloduy NPP's (Unit 1 - to 4) is presented. (authors)

Continuum Mechanics

CERN Document Server

Romano, Antonio

2010-01-01

This book offers a broad overview of the potential of continuum mechanics to describe a wide range of macroscopic phenomena in real-world problems. Building on the fundamentals presented in the authors' previous book, Continuum Mechanics using Mathematica(R), this new work explores interesting models of continuum mechanics, with an emphasis on exploring the flexibility of their applications in a wide variety of fields.Specific topics, which have been chosen to show the power of continuum mechanics to characterize the experimental behavior of real phenomena, include: * various aspects of nonlin

Reconstructing and deconstructing the self: cognitive mechanisms in meditation practice.

Science.gov (United States)

Dahl, Cortland J; Lutz, Antoine; Davidson, Richard J

2015-09-01

Scientific research highlights the central role of specific psychological processes, in particular those related to the self, in various forms of human suffering and flourishing. This view is shared by Buddhism and other contemplative and humanistic traditions, which have developed meditation practices to regulate these processes. Building on a previous paper in this journal, we propose a novel classification system that categorizes specific styles of meditation into attentional, constructive, and deconstructive families based on their primary cognitive mechanisms. We suggest that meta-awareness, perspective taking and cognitive reappraisal, and self-inquiry may be important mechanisms in specific families of meditation and that alterations in these processes may be used to target states of experiential fusion, maladaptive self-schema, and cognitive reification. Copyright © 2015 Elsevier Ltd. All rights reserved.

A Proposed Molecular Mechanism of High-Dose Vitamin D3 Supplementation in Prevention and Treatment of Preeclampsia

Directory of Open Access Journals (Sweden)

Piotr Zabul

2015-06-01

Full Text Available A randomized prospective clinical study performed on a group of 74 pregnant women (43 presenting with severe preeclampsia proved that urinary levels of 15-F2t-isoprostane were significantly higher in preeclamptic patients relative to the control (3.05 vs. 2.00 ng/mg creatinine. Surprisingly enough, plasma levels of 25-hydroxyvitamin D3 in both study groups were below the clinical reference range with no significant difference between the groups. In vitro study performed on isolated placental mitochondria and placental cell line showed that suicidal self-oxidation of cytochrome P450scc may lead to structural disintegration of heme, potentially contributing to enhancement of oxidative stress phenomena in the course of preeclampsia. As placental cytochrome P450scc pleiotropic activity is implicated in the metabolism of free radical mediated arachidonic acid derivatives as well as multiple Vitamin D3 hydroxylations and progesterone synthesis, we propose that Vitamin D3 might act as a competitive inhibitor of placental cytochrome P450scc preventing the production of lipid peroxides or excess progesterone synthesis, both of which may contribute to the etiopathogenesis of preeclampsia. The proposed molecular mechanism is in accord with the preliminary clinical observations on the surprisingly high efficacy of high-dose Vitamin D3 supplementation in prevention and treatment of preeclampsia.

A damage mechanics based general purpose interface/contact element

Science.gov (United States)

Yan, Chengyong

Most of the microelectronics packaging structures consist of layered substrates connected with bonding materials, such as solder or epoxy. Predicting the thermomechanical behavior of these multilayered structures is a challenging task in electronic packaging engineering. In a layered structure the most complex part is always the interfaces between the strates. Simulating the thermo-mechanical behavior of such interfaces, is the main theme of this dissertation. The most commonly used solder material, Pb-Sn alloy, has a very low melting temperature 180sp°C, so that the material demonstrates a highly viscous behavior. And, creep usually dominates the failure mechanism. Hence, the theory of viscoplasticity is adapted to describe the constitutive behavior. In a multilayered assembly each layer has a different coefficient of thermal expansion. Under thermal cycling, due to heat dissipated from circuits, interfaces and interconnects experience low cycle fatigue. Presently, the state-of-the art damage mechanics model used for fatigue life predictions is based on Kachanov (1986) continuum damage model. This model uses plastic strain as a damage criterion. Since plastic strain is a stress path dependent value, the criterion does not yield unique damage values for the same state of stress. In this dissertation a new damage evolution equation based on the second law of thermodynamic is proposed. The new criterion is based on the entropy of the system and it yields unique damage values for all stress paths to the final state of stress. In the electronics industry, there is a strong desire to develop fatigue free interconnections. The proposed interface/contact element can also simulate the behavior of the fatigue free Z-direction thin film interconnections as well as traditional layered interconnects. The proposed interface element can simulate behavior of a bonded interface or unbonded sliding interface, also called contact element. The proposed element was verified against

Proteomic investigation of the mechanism controlling the Cyclin D-dependent Kinase

International Nuclear Information System (INIS)

Crescenzi, M.

2009-01-01

This project has been carried out accordingly to the original proposal and it has yielded significant scientific results with great therapeutic potential. Previous work from the PI's group has shown that the cyclin D-dependent kinase activity plays a critical role in the regulation of the post mitotic state of Terminally Differentiated (TD) cells. The first aim of the project was to unravel the molecular mechanisms that repress such kinase activity in TD cells. The use of complementary biochemistry and mass spectrometry techniques has allowed us to answer this question satisfactorily

A novel RF MEMS switch with novel mechanical structure modeling

International Nuclear Information System (INIS)

Chan, K Y; Ramer, R

2010-01-01

A novel RF MEMS contact-type switch for RF and microwave applications is presented. The switch is designed with special mechanical structures for stiffness enhancement. A method of using dimple lines to reduce the stress sensitivity of a beam is shown with complete mathematical modeling and finite element mechanical simulation. A complete mathematical model is developed for the proposed switch. Limited fabrication resolution and non-uniformities in layer thickness and stress were taken into consideration for this design, concomitantly with the preservation of device miniaturization and functionalities. The novel mechanical modeling of the switch leads to the estimation of the actuation voltage and shows simplification from previously published analysis. The measured actuation voltage and RF performance of the novel RF MEMS switch are also reported. The switch actuated at 20 V achieved better than 22 dB return loss and less than 0.7 dB insertion loss in on state from dc–40 GHz; it provided better than 30 dB isolation in off state

Nucleation mechanism for the direct graphite-to-diamond phase transition

Science.gov (United States)

Khaliullin, Rustam Z.; Eshet, Hagai; Kühne, Thomas D.; Behler, Jörg; Parrinello, Michele

2011-09-01

Graphite and diamond have comparable free energies, yet forming diamond from graphite in the absence of a catalyst requires pressures that are significantly higher than those at equilibrium coexistence. At lower temperatures, the formation of the metastable hexagonal polymorph of diamond is favoured instead of the more stable cubic diamond. These phenomena cannot be explained by the concerted mechanism suggested in previous theoretical studies. Using an ab initio quality neural-network potential, we carried out a large-scale study of the graphite-to-diamond transition assuming that it occurs through nucleation. The nucleation mechanism accounts for the observed phenomenology and reveals its microscopic origins. We demonstrate that the large lattice distortions that accompany the formation of diamond nuclei inhibit the phase transition at low pressure, and direct it towards the hexagonal diamond phase at higher pressure. The proposed nucleation mechanism should improve our understanding of structural transformations in a wide range of carbon-based materials.

An Optimal Design of Driving Mechanism in a 1 Degree of Freedom (d.o.f. Anthropomorphic Finger

Directory of Open Access Journals (Sweden)

M. Ceccarelli

2005-01-01

Full Text Available Mechanisms can be used in finger design to obtain suitable actuation systems and to give stiff robust behavior in grasping tasks. The design of driving mechanisms for fingers has been attached at LARM in Cassino with the aim to obtain one degree of freedom actuation for an anthropomorphic finger. The dimensional design of a finger-driving mechanism has been formulated as a multi-objective optimization problem by using evaluation criteria for fundamental characteristics regarding with finger motion, grasping equilibrium and force transmission. The feasibility of the herein proposed optimum design procedure for a finger-driving mechanism has been tested by numerical examples that have been also used to enhance a prototype previously built at LARM in Cassino.

Previous experience in manned space flight: A survey of human factors lessons learned

Science.gov (United States)

Chandlee, George O.; Woolford, Barbara

1993-01-01

Previous experience in manned space flight programs can be used to compile a data base of human factors lessons learned for the purpose of developing aids in the future design of inhabited spacecraft. The objectives are to gather information available from relevant sources, to develop a taxonomy of human factors data, and to produce a data base that can be used in the future for those people involved in the design of manned spacecraft operations. A study is currently underway at the Johnson Space Center with the objective of compiling, classifying, and summarizing relevant human factors data bearing on the lessons learned from previous manned space flights. The research reported defines sources of data, methods for collection, and proposes a classification for human factors data that may be a model for other human factors disciplines.

Security Mechanism Based on Hospital Authentication Server for Secure Application of Implantable Medical Devices

Directory of Open Access Journals (Sweden)

Chang-Seop Park

2014-01-01

Full Text Available After two recent security attacks against implantable medical devices (IMDs have been reported, the privacy and security risks of IMDs have been widely recognized in the medical device market and research community, since the malfunctioning of IMDs might endanger the patient’s life. During the last few years, a lot of researches have been carried out to address the security-related issues of IMDs, including privacy, safety, and accessibility issues. A physician accesses IMD through an external device called a programmer, for diagnosis and treatment. Hence, cryptographic key management between IMD and programmer is important to enforce a strict access control. In this paper, a new security architecture for the security of IMDs is proposed, based on a 3-Tier security model, where the programmer interacts with a Hospital Authentication Server, to get permissions to access IMDs. The proposed security architecture greatly simplifies the key management between IMDs and programmers. Also proposed is a security mechanism to guarantee the authenticity of the patient data collected from IMD and the nonrepudiation of the physician’s treatment based on it. The proposed architecture and mechanism are analyzed and compared with several previous works, in terms of security and performance.

Laparoscopy After Previous Laparotomy

Directory of Open Access Journals (Sweden)

Zulfo Godinjak

2006-11-01

Full Text Available Following the abdominal surgery, extensive adhesions often occur and they can cause difficulties during laparoscopic operations. However, previous laparotomy is not considered to be a contraindication for laparoscopy. The aim of this study is to present that an insertion of Veres needle in the region of umbilicus is a safe method for creating a pneumoperitoneum for laparoscopic operations after previous laparotomy. In the last three years, we have performed 144 laparoscopic operations in patients that previously underwent one or two laparotomies. Pathology of digestive system, genital organs, Cesarean Section or abdominal war injuries were the most common causes of previouslaparotomy. During those operations or during entering into abdominal cavity we have not experienced any complications, while in 7 patients we performed conversion to laparotomy following the diagnostic laparoscopy. In all patients an insertion of Veres needle and trocar insertion in the umbilical region was performed, namely a technique of closed laparoscopy. Not even in one patient adhesions in the region of umbilicus were found, and no abdominal organs were injured.

Perivalvular pannus and valve thrombosis: two concurrent mechanisms of mechanical valve prosthesis dysfunction.

Science.gov (United States)

Arnáiz-García, María Elena; González-Santos, Jose María; Bueno-Codoñer, María E; López-Rodríguez, Javier; Dalmau-Sorlí, María José; Arévalo-Abascal, Adolfo; Arribas-Jiménez, Antonio; Diego-Nieto, Alejandro; Rodríguez-Collado, Javier; Rodríguez-López, Jose María

2015-02-01

A 78-year-old woman was admitted to our institution with progressive dyspnea. She had previously been diagnosed with rheumatic heart disease and had undergone cardiac surgery for mechanical mitral valve replacement ten years previously. Transesophageal echocardiography revealed blockage of the mechanical prosthesis and the patient was scheduled for surgery, in which a thrombus was removed from the left atrial appendage. A partial thrombosis of the mechanical prosthesis and circumferential pannus overgrowth were concomitantly detected. Prosthetic heart valve blockage is a rare but life-threatening complication, the main causes of which are thrombosis and pannus formation. The two conditions are different but both are usually misdiagnosed. Two concurrent mechanisms of prosthesis blockage were found in this patient. Copyright © 2014 Sociedade Portuguesa de Cardiologia. Published by Elsevier España. All rights reserved.

A Channel Allocation Mechanism for Cellular Networks

Directory of Open Access Journals (Sweden)

Chi-Hua Chen

2017-04-01

Full Text Available In cellular networks, call blocking causes lower customer satisfaction and economic loss. Therefore, the channel allocation for call block avoidance is an important issue. This study proposes a mechanism that considers the real-time traffic information (e.g., traffic flow and vehicle speed and the user behavior (e.g., call inter-arrival time and call holding time to analyze the adaptable number of communication calls in the specific cell for channel allocation. In experiments about call block probabilities (CBP, this study simulated two cases that are the situations of the whole day and traffic accident. The simulation results show that all CBPs in the scenario of whole day are less than 21.5% by using the proposed mechanism, which is better than using the static channel allocation (SCA mechanism. Moreover, all CBPs in the scenario of traffic accidents are less than 16.5% by using the proposed mechanism, which is better than using the SCA mechanism. Therefore, the proposed mechanism can decrease the number of CBPs effectively.

Research on offense and defense technology for iOS kernel security mechanism

Science.gov (United States)

Chu, Sijun; Wu, Hao

2018-04-01

iOS is a strong and widely used mobile device system. It's annual profits make up about 90% of the total profits of all mobile phone brands. Though it is famous for its security, there have been many attacks on the iOS operating system, such as the Trident apt attack in 2016. So it is important to research the iOS security mechanism and understand its weaknesses and put forward targeted protection and security check framework. By studying these attacks and previous jailbreak tools, we can see that an attacker could only run a ROP code and gain kernel read and write permissions based on the ROP after exploiting kernel and user layer vulnerabilities. However, the iOS operating system is still protected by the code signing mechanism, the sandbox mechanism, and the not-writable mechanism of the system's disk area. This is far from the steady, long-lasting control that attackers expect. Before iOS 9, breaking these security mechanisms was usually done by modifying the kernel's important data structures and security mechanism code logic. However, after iOS 9, the kernel integrity protection mechanism was added to the 64-bit operating system and none of the previous methods were adapted to the new versions of iOS [1]. But this does not mean that attackers can not break through. Therefore, based on the analysis of the vulnerability of KPP security mechanism, this paper implements two possible breakthrough methods for kernel security mechanism for iOS9 and iOS10. Meanwhile, we propose a defense method based on kernel integrity detection and sensitive API call detection to defense breakthrough method mentioned above. And we make experiments to prove that this method can prevent and detect attack attempts or invaders effectively and timely.

Unraveling the Mechanisms of Manual Therapy: Modeling an Approach.

Science.gov (United States)

Bialosky, Joel E; Beneciuk, Jason M; Bishop, Mark D; Coronado, Rogelio A; Penza, Charles W; Simon, Corey B; George, Steven Z

2018-01-01

Synopsis Manual therapy interventions are popular among individual health care providers and their patients; however, systematic reviews do not strongly support their effectiveness. Small treatment effect sizes of manual therapy interventions may result from a "one-size-fits-all" approach to treatment. Mechanistic-based treatment approaches to manual therapy offer an intriguing alternative for identifying patients likely to respond to manual therapy. However, the current lack of knowledge of the mechanisms through which manual therapy interventions inhibit pain limits such an approach. The nature of manual therapy interventions further confounds such an approach, as the related mechanisms are likely a complex interaction of factors related to the patient, the provider, and the environment in which the intervention occurs. Therefore, a model to guide both study design and the interpretation of findings is necessary. We have previously proposed a model suggesting that the mechanical force from a manual therapy intervention results in systemic neurophysiological responses leading to pain inhibition. In this clinical commentary, we provide a narrative appraisal of the model and recommendations to advance the study of manual therapy mechanisms. J Orthop Sports Phys Ther 2018;48(1):8-18. doi:10.2519/jospt.2018.7476.

Exploring possible mechanisms of action for the nanotoxicity and protein binding of decorated nanotubes: interpretation of physicochemical properties from optimal QSAR models

International Nuclear Information System (INIS)

Esposito, Emilio Xavier; Hopfinger, Anton J.; Shao, Chi-Yu; Su, Bo-Han; Chen, Sing-Zuo; Tseng, Yufeng Jane

2015-01-01

Carbon nanotubes have become widely used in a variety of applications including biosensors and drug carriers. Therefore, the issue of carbon nanotube toxicity is increasingly an area of focus and concern. While previous studies have focused on the gross mechanisms of action relating to nanomaterials interacting with biological entities, this study proposes detailed mechanisms of action, relating to nanotoxicity, for a series of decorated (functionalized) carbon nanotube complexes based on previously reported QSAR models. Possible mechanisms of nanotoxicity for six endpoints (bovine serum albumin, carbonic anhydrase, chymotrypsin, hemoglobin along with cell viability and nitrogen oxide production) have been extracted from the corresponding optimized QSAR models. The molecular features relevant to each of the endpoint respective mechanism of action for the decorated nanotubes are also discussed. Based on the molecular information contained within the optimal QSAR models for each nanotoxicity endpoint, either the decorator attached to the nanotube is directly responsible for the expression of a particular activity, irrespective of the decorator's 3D-geometry and independent of the nanotube, or those decorators having structures that place the functional groups of the decorators as far as possible from the nanotube surface most strongly influence the biological activity. These molecular descriptors are further used to hypothesize specific interactions involved in the expression of each of the six biological endpoints. - Highlights: • Proposed toxicity mechanism of action for decorated nanotubes complexes • Discussion of the key molecular features for each endpoint's mechanism of action • Unique mechanisms of action for each of the six biological systems • Hypothesized mechanisms of action based on QSAR/QNAR predictive models

Exploring possible mechanisms of action for the nanotoxicity and protein binding of decorated nanotubes: interpretation of physicochemical properties from optimal QSAR models

Energy Technology Data Exchange (ETDEWEB)

Esposito, Emilio Xavier, E-mail: emilio@exeResearch.com [exeResearch, LLC, 32 University Drive, East Lansing, MI 48823 (United States); The Chem21 Group, Inc., 1780 Wilson Drive, Lake Forest, IL 60045 (United States); Hopfinger, Anton J., E-mail: hopfingr@gmail.com [The Chem21 Group, Inc., 1780 Wilson Drive, Lake Forest, IL 60045 (United States); College of Pharmacy MSC09 5360, 1 University of New Mexico, Albuquerque, NM, 87131 (United States); Shao, Chi-Yu [Graduate Institute of Biomedical Electronics and Bioinformatics, National Taiwan University, No. 1 Sec. 4, Roosevelt Road, Taipei 106, Taiwan (China); Su, Bo-Han [Department of Computer Science and Information Engineering, National Taiwan University, No. 1 Sec. 4, Roosevelt Road, Taipei 106, Taiwan (China); Chen, Sing-Zuo [Graduate Institute of Biomedical Electronics and Bioinformatics, National Taiwan University, No. 1 Sec. 4, Roosevelt Road, Taipei 106, Taiwan (China); Tseng, Yufeng Jane, E-mail: yjtseng@csie.ntu.edu.tw [Graduate Institute of Biomedical Electronics and Bioinformatics, National Taiwan University, No. 1 Sec. 4, Roosevelt Road, Taipei 106, Taiwan (China); Department of Computer Science and Information Engineering, National Taiwan University, No. 1 Sec. 4, Roosevelt Road, Taipei 106, Taiwan (China)

2015-10-01

Carbon nanotubes have become widely used in a variety of applications including biosensors and drug carriers. Therefore, the issue of carbon nanotube toxicity is increasingly an area of focus and concern. While previous studies have focused on the gross mechanisms of action relating to nanomaterials interacting with biological entities, this study proposes detailed mechanisms of action, relating to nanotoxicity, for a series of decorated (functionalized) carbon nanotube complexes based on previously reported QSAR models. Possible mechanisms of nanotoxicity for six endpoints (bovine serum albumin, carbonic anhydrase, chymotrypsin, hemoglobin along with cell viability and nitrogen oxide production) have been extracted from the corresponding optimized QSAR models. The molecular features relevant to each of the endpoint respective mechanism of action for the decorated nanotubes are also discussed. Based on the molecular information contained within the optimal QSAR models for each nanotoxicity endpoint, either the decorator attached to the nanotube is directly responsible for the expression of a particular activity, irrespective of the decorator's 3D-geometry and independent of the nanotube, or those decorators having structures that place the functional groups of the decorators as far as possible from the nanotube surface most strongly influence the biological activity. These molecular descriptors are further used to hypothesize specific interactions involved in the expression of each of the six biological endpoints. - Highlights: • Proposed toxicity mechanism of action for decorated nanotubes complexes • Discussion of the key molecular features for each endpoint's mechanism of action • Unique mechanisms of action for each of the six biological systems • Hypothesized mechanisms of action based on QSAR/QNAR predictive models.

Sectoral Market Mechanisms

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-07-01

This paper first reviews proposals for the design of sectoral and related market mechanisms currently debated, both in the UNFCCC negotiations, and in different domestic legislative contexts. Secondly, it addresses the possible principles and technical requirements that Parties may wish to consider as the foundations for further elaboration of the mechanisms. The third issue explored herein is domestic implementation of sectoral market mechanisms by host countries, incentives to move to new market mechanisms, as well as how the transition between current and future mechanisms could be managed.

New production mechanism for keV sterile neutrino Dark Matter by decays of frozen-in scalars

International Nuclear Information System (INIS)

Merle, Alexander; Niro, Viviana; Schmidt, Daniel

2014-01-01

We propose a new production mechanism for keV sterile neutrino Dark Matter. In our setting, we assume the existence of a scalar singlet particle which never entered thermal equilibrium in the early Universe, since it only couples to the Standard Model fields by a really small Higgs portal interaction. For suitable values of this coupling, the scalar can undergo the so-called freeze-in process, and in this way be efficiently produced in the early Universe. These scalars can then decay into keV sterile neutrinos and produce the correct Dark Matter abundance. While similar settings in which the scalar does enter thermal equilibrium and then freezes out have been studied previously, the mechanism proposed here is new and represents a versatile extension of the known case. We perform a detailed numerical calculation of the DM production using a set of coupled Boltzmann equations, and we illustrate the successful regions in the parameter space. Our production mechanism notably can even work in models where active-sterile mixing is completely absent

Preoperative screening: value of previous tests.

Science.gov (United States)

Macpherson, D S; Snow, R; Lofgren, R P

1990-12-15

To determine the frequency of tests done in the year before elective surgery that might substitute for preoperative screening tests and to determine the frequency of test results that change from a normal value to a value likely to alter perioperative management. Retrospective cohort analysis of computerized laboratory data (complete blood count, sodium, potassium, and creatinine levels, prothrombin time, and partial thromboplastin time). Urban tertiary care Veterans Affairs Hospital. Consecutive sample of 1109 patients who had elective surgery in 1988. At admission, 7549 preoperative tests were done, 47% of which duplicated tests performed in the previous year. Of 3096 previous results that were normal as defined by hospital reference range and done closest to the time of but before admission (median interval, 2 months), 13 (0.4%; 95% CI, 0.2% to 0.7%), repeat values were outside a range considered acceptable for surgery. Most of the abnormalities were predictable from the patient's history, and most were not noted in the medical record. Of 461 previous tests that were abnormal, 78 (17%; CI, 13% to 20%) repeat values at admission were outside a range considered acceptable for surgery (P less than 0.001, frequency of clinically important abnormalities of patients with normal previous results with those with abnormal previous results). Physicians evaluating patients preoperatively could safely substitute the previous test results analyzed in this study for preoperative screening tests if the previous tests are normal and no obvious indication for retesting is present.

The reaction mechanism for dehydration process catalyzed by type I dehydroquinate dehydratase from Gram-negative Salmonella enterica

Science.gov (United States)

Yao, Yuan; Li, Ze-Sheng

2012-01-01

The fundamental reaction mechanism for the dehydration process catalyzed by type I dehydroquinate dehydratase from Gram-negative Salmonella enterica has been studied by density functional theory calculations. The results indicate that the dehydration process undergoes a two-step cis-elimination mechanism, which is different from the previously proposed one. The catalytic roles of both the highly conserved residue His143 and the Schiff base formed between the substrate and Lys170 have also been elucidated. The structural and mechanistic insight presented here may direct the design of type I dehydroquinate dehydratase enzyme inhibitors as non-toxic antimicrobials, anti-fungals, and herbicides.

STRUCTURE OF ECONOMIC MECHANISM

Directory of Open Access Journals (Sweden)

L. I. Podderegina

2006-01-01

Full Text Available The paper considers and analyzes scientific approaches of economists to the essence and contents of the economic mechanism. Proposals for methodological formation of economic mechanism structure are substantiated in the paper.

Quantum Mechanics/Molecular Mechanics Modeling of Drug Metabolism

DEFF Research Database (Denmark)

Lonsdale, Richard; Fort, Rachel M; Rydberg, Patrik

2016-01-01

)-mexiletine in CYP1A2 with hybrid quantum mechanics/molecular mechanics (QM/MM) methods, providing a more detailed and realistic model. Multiple reaction barriers have been calculated at the QM(B3LYP-D)/MM(CHARMM27) level for the direct N-oxidation and H-abstraction/rebound mechanisms. Our calculated barriers......The mechanism of cytochrome P450(CYP)-catalyzed hydroxylation of primary amines is currently unclear and is relevant to drug metabolism; previous small model calculations have suggested two possible mechanisms: direct N-oxidation and H-abstraction/rebound. We have modeled the N-hydroxylation of (R...... indicate that the direct N-oxidation mechanism is preferred and proceeds via the doublet spin state of Compound I. Molecular dynamics simulations indicate that the presence of an ordered water molecule in the active site assists in the binding of mexiletine in the active site...

Modeling of the Reaction Mechanism of Enzymatic Radical C–C Coupling by Benzylsuccinate Synthase

Directory of Open Access Journals (Sweden)

Maciej Szaleniec

2016-04-01

Full Text Available Molecular modeling techniques and density functional theory calculations were performed to study the mechanism of enzymatic radical C–C coupling catalyzed by benzylsuccinate synthase (BSS. BSS has been identified as a glycyl radical enzyme that catalyzes the enantiospecific fumarate addition to toluene initiating its anaerobic metabolism in the denitrifying bacterium Thauera aromatica, and this reaction represents the general mechanism of toluene degradation in all known anaerobic degraders. In this work docking calculations, classical molecular dynamics (MD simulations, and DFT+D2 cluster modeling was employed to address the following questions: (i What mechanistic details of the BSS reaction yield the most probable molecular model? (ii What is the molecular basis of enantiospecificity of BSS? (iii Is the proposed mechanism consistent with experimental observations, such as an inversion of the stereochemistry of the benzylic protons, syn addition of toluene to fumarate, exclusive production of (R-benzylsuccinate as a product and a kinetic isotope effect (KIE ranging between 2 and 4? The quantum mechanics (QM modeling confirms that the previously proposed hypothetical mechanism is the most probable among several variants considered, although C–H activation and not C–C coupling turns out to be the rate limiting step. The enantiospecificity of the enzyme seems to be enforced by a thermodynamic preference for binding of fumarate in the pro(R orientation and reverse preference of benzyl radical attack on fumarate in pro(S pathway which results with prohibitively high energy barrier of the radical quenching. Finally, the proposed mechanism agrees with most of the experimental observations, although the calculated intrinsic KIE from the model (6.5 is still higher than the experimentally observed values (4.0 which suggests that both C–H activation and radical quenching may jointly be involved in the kinetic control of the reaction.

Attachment security as a mechanism linking foster care placement to improved mental health outcomes in previously institutionalized children.

Science.gov (United States)

McLaughlin, Katie A; Zeanah, Charles H; Fox, Nathan A; Nelson, Charles A

2012-01-01

Children reared in institutions experience elevated rates of psychiatric disorders. Inability to form a secure attachment relationship to a primary caregiver is posited to be a central mechanism in this association. We determined whether the ameliorative effect of a foster care (FC) intervention on internalizing disorders in previously institutionalized children was explained by the development of secure attachment among children placed in FC. Second we evaluated the role of lack of attachment in an institutionalized sample on the etiology of internalizing disorders within the context of a randomized trial. A sample of 136 children (aged 6-30 months) residing in institutions was recruited in Bucharest, Romania. Children were randomized to FC (n = 68) or to care as usual (CAU; n = 68). Foster parents were recruited, trained, and overseen by the investigative team. Attachment security at 42 months was assessed using the Strange Situation Procedure, and internalizing disorders at 54 months were assessed using the Preschool Age Psychiatric Assessment. Girls in FC had fewer internalizing disorders than girls in CAU (OR = 0.17, p = .006). The intervention had no effect on internalizing disorders in boys (OR = 0.47, p = .150). At 42 months, girls in FC were more likely to have secure attachment than girls in CAU (OR = 12.5, p security predicted lower rates of internalizing disorders in both sexes. Development of attachment security fully mediated intervention effects on internalizing disorders in girls. Placement into FC facilitated the development of secure attachment and prevented the onset of internalizing disorders in institutionalized girls. The differential effects of FC on attachment security in boys and girls explained gender differences in the intervention effects on psychopathology. Findings provide evidence for the critical role of disrupted attachment in the etiology of internalizing disorders in children exposed to institutionalization. © 2011 The Authors

AUCTION MECHANISMS FOR IMPLEMENTING TRADABLE NETWORK PERMIT MARKETS

Science.gov (United States)

Wada, Kentaro; Akamatsu, Takashi

This paper proposes a new auction mechanism for implementing the tradable network permit markets. Assuming that each user makes a trip from an origin to a destination along a path in a specific time period, we design an auction mechanism that enables each user to purchase a bundle of permits corresponding to a set of links in the user's preferred path. The objective of the proposed mechanism is to achieve a socially optimal state with minimal revelation of users' private information. In order to achieve this, the mechanism employs an evolutionary approach that has an auction phase and a path capacity adjustment phase, which are repeated on a day-to-day basis. We prove that the proposed mechanism has the following desirable properties: (1) truthful bidding is the dominant strategy for each user and (2) the proposed mechanism converges to an approximate socially optimal state in the sense that the achieved value of the social surplus reaches its maximum value when the number of users is large.

75 FR 60435 - Proposed Collection; Comment Request

Science.gov (United States)

2010-09-30

..., including through the use of automated collection techniques or other forms of information technology. DATES... 3502(c)(2)(A) of the Paperwork Reduction Act of 1995, the Chief of Naval Education and Training announces a proposed extension of a previously approved public information collection and seeks public...

High mechanical advantage design of six-bar Stephenson mechanism for servo mechanical presses

Directory of Open Access Journals (Sweden)

Jianguo Hu

2016-06-01

Full Text Available This article proposed a two-phase design scheme of Stephenson six-bar working mechanisms for servo mechanical presses with high mechanical advantage. In the qualitative design phase, first, a Stephenson six-bar mechanism with a slide was derived from Stephenson six-bar kinematic chains. Second, based on the instant center analysis method, the relationship between mechanical advantage and some special instant centers was founded, and accordingly a primary mechanism configuration with high mechanical advantage was designed qualitatively. Then, a parameterized prototype model was established, and the influences of design parameters toward slide kinematical characteristics were analyzed. In the quantitative design phase, a multi-objective optimization model, aiming at high mechanical advantage and dwelling characteristics, was built, and a case design was done to find optimal dimensions. Finally, simulations based on the software ADAMS were conducted to compare the transmission characteristics of the optimized working mechanism with that of slide-crank mechanism and symmetrical toggle mechanism, and an experimental press was made to validate the design scheme. The simulation and experiment results show that, compared with general working mechanisms, the Stephenson six-bar working mechanism has higher mechanical advantage and better dwelling characteristics, reducing capacities and costs of servo motors effectively.

Exploring the Proposed DSM-5 Criteria in a Clinical Sample

Science.gov (United States)

Taheri, Azin; Perry, Adrienne

2012-01-01

The proposed DSM-5 criteria for Autism Spectrum Disorder (ASD) depart substantially from the previous DSM-IV criteria. In this file review study of 131 children aged 2-12, previously diagnosed with either Autistic Disorder or Pervasive Developmental Disorder-Not Otherwise Specified (PDD-NOS), 63% met the new DSM-5 ASD criteria, including 81%…

Geometric Mechanics Reveals Optimal Complex Terrestrial Undulation Patterns

Science.gov (United States)

Gong, Chaohui; Astley, Henry; Schiebel, Perrin; Dai, Jin; Travers, Matthew; Goldman, Daniel; Choset, Howie; CMU Team; GT Team

Geometric mechanics offers useful tools for intuitively analyzing biological and robotic locomotion. However, utility of these tools were previously restricted to systems that have only two internal degrees of freedom and in uniform media. We show kinematics of complex locomotors that make intermittent contacts with substrates can be approximated as a linear combination of two shape bases, and can be represented using two variables. Therefore, the tools of geometric mechanics can be used to analyze motions of locomotors with many degrees of freedom. To demonstrate the proposed technique, we present studies on two different types of snake gaits which utilize combinations of waves in the horizontal and vertical planes: sidewinding (in the sidewinder rattlesnake C. cerastes) and lateral undulation (in the desert specialist snake C. occipitalis). C. cerastes moves by generating posteriorly traveling body waves in the horizontal and vertical directions, with a relative phase offset equal to +/-π/2 while C. occipitalismaintains a π/2 offset of a frequency doubled vertical wave. Geometric analysis reveals these coordination patterns enable optimal movement in the two different styles of undulatory terrestrial locomotion. More broadly, these examples demonstrate the utility of geometric mechanics in analyzing realistic biological and robotic locomotion.

A survey of energy conservation mechanisms for dynamic cluster based wireless sensor networks

International Nuclear Information System (INIS)

Enam, R.N.; Tahir, M.; Ahmed, S.; Qureshi, R.

2018-01-01

WSN (Wireless Sensor Network) is an emerging technology that has unlimited potential for numerous application areas including military, crisis management, environmental, transportation, medical, home/ city automations and smart spaces. But energy constrained nature of WSNs necessitates that their architecture and communicating protocols to be designed in an energy aware manner. Sensor data collection through clustering mechanisms has become a common strategy in WSN. This paper presents a survey report on the major perspectives with which energy conservation mechanisms has been proposed in dynamic cluster based WSNs so far. All the solutions discussed in this paper focus on the cluster based protocols only.We have covered a vast scale of existing energy efficient protocols and have categorized them in six categories. In the beginning of this paper the fundamentals of the energy constraint issues of WSNs have been discussed and an overview of the causes of energy consumptions at all layers of WSN has been given. Later in this paper several previously proposed energy efficient protocols of WSNs are presented. (author)

A Survey of Energy Conservation Mechanisms for Dynamic Cluster Based Wireless Sensor Networks

Directory of Open Access Journals (Sweden)

Rabia Noor Enam

2018-04-01

Full Text Available WSN (Wireless Sensor Network is an emerging technology that has unlimited potential for numerous application areas including military, crisis management, environmental, transportation, medical, home/ city automations and smart spaces. But energy constrained nature of WSNs necessitates that their architecture and communicating protocols to be designed in an energy aware manner. Sensor data collection through clustering mechanisms has become a common strategy in WSN. This paper presents a survey report on the major perspectives with which energy conservation mechanisms has been proposed in dynamic cluster based WSNs so far. All the solutions discussed in this paper focus on the cluster based protocols only.We have covered a vast scale of existing energy efficient protocols and have categorized them in six categories. In the beginning of this paper the fundamentals of the energy constraint issues of WSNs have been discussed and an overview of the causes of energy consumptions at all layers of WSN has been given. Later in this paper several previously proposed energy efficient protocols of WSNs are presented.

Electro-mechanical response of a 3D nerve bundle model to mechanical loads leading to axonal injury.

Science.gov (United States)

Cinelli, I; Destrade, M; Duffy, M; McHugh, P

2018-03-01

Traumatic brain injuries and damage are major causes of death and disability. We propose a 3D fully coupled electro-mechanical model of a nerve bundle to investigate the electrophysiological impairments due to trauma at the cellular level. The coupling is based on a thermal analogy of the neural electrical activity by using the finite element software Abaqus CAE 6.13-3. The model includes a real-time coupling, modulated threshold for spiking activation, and independent alteration of the electrical properties for each 3-layer fibre within a nerve bundle as a function of strain. Results of the coupled electro-mechanical model are validated with previously published experimental results of damaged axons. Here, the cases of compression and tension are simulated to induce (mild, moderate, and severe) damage at the nerve membrane of a nerve bundle, made of 4 fibres. Changes in strain, stress distribution, and neural activity are investigated for myelinated and unmyelinated nerve fibres, by considering the cases of an intact and of a traumatised nerve membrane. A fully coupled electro-mechanical modelling approach is established to provide insights into crucial aspects of neural activity at the cellular level due to traumatic brain injury. One of the key findings is the 3D distribution of residual stresses and strains at the membrane of each fibre due to mechanically induced electrophysiological impairments, and its impact on signal transmission. Copyright © 2017 John Wiley & Sons, Ltd.

Self-reported previous knee injury and low knee function increase knee injury risk in adolescent female football.

Science.gov (United States)

Clausen, M B; Tang, L; Zebis, M K; Krustrup, P; Hölmich, P; Wedderkopp, N; Andersen, L L; Christensen, K B; Møller, M; Thorborg, K

2016-08-01

Knee injuries are common in adolescent female football. Self-reported previous knee injury and low Knee injury and Osteoarthritis Outcome Score (KOOS) are proposed to predict future knee injuries, but evidence regarding this in adolescent female football is scarce. The aim of this study was to investigate self-reported previous knee injury and low KOOS subscale score as risk factors for future knee injuries in adolescent female football. A sample of 326 adolescent female football players, aged 15-18, without knee injury at baseline, were included. Data on self-reported previous knee injury and KOOS questionnaires were collected at baseline. Time-loss knee injuries and football exposures were reported weekly by answers to standardized text-message questions, followed by injury telephone interviews. A priori, self-reported previous knee injury and low KOOS subscale scores (female football. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Psychobiological mechanisms of exercise dependence.

Science.gov (United States)

Hamer, Mark; Karageorghis, Costas I

2007-01-01

Exercise dependence (ED) is characterised by an obsessive and unhealthy preoccupation with exercise. Previous research has focused largely on identifying behavioural aspects of ED, although the biological mechanisms remain unknown and are under researched. We review various ED hypotheses including affect regulation, anorexia analogue, sympathetic arousal and beta-endorphin. We also present a novel hypothesis pertaining to ED and interleukin (IL)-6, which combines previous hypotheses with literature from the field of psycho-neuroimmunology. We explore the notion that IL-6 provides a link from the periphery to the brain, which may mediate the underlying features of ED. We propose a conceptual model indicating that, in individuals prone to ED, exercise results in a transient reduction in negative affect, but concurrently results in excessive production of IL-6 and the activation of neuroendocrine pathways, which are associated with behavioural and psychological disturbances of exercise withdrawal. Our intention is for this model to serve as a basis for further research in the area of ED, which may eventually lead to the development of successful treatment strategies. Recent developments in methods to reliably assess these biological markers from blood and saliva samples should encourage such research to be undertaken in exercise settings.

Program of assessment of mechanical and corrosion mechanical properties of reactor internals materials due to operation conditions in WWERs

International Nuclear Information System (INIS)

Ruscak, M.; Zamboch, M.

1998-01-01

Reactor internals are subject to three principle operation influences: neutron and gamma irradiation, mechanical stresses, both static and dynamic, and coolant chemistry. Several cases of damage have been reported in previous years in both boiling and pressure water reactors. They are linked with the term of irradiation assisted stress corrosion cracking as a possible damage mechanism. In WWERs, the principal material used for reactor internals is austenitic titanium stabilized stainless steel 08Kh18N10T, however high strength steels are used as well. To assess the changes of mechanical properties and to determine whether sensitivity to intergranular cracking can be increased by high neutron fluences, the experimental program has been started. The goal is to assure safe operation of the internals as well as life management for all planned operation period. The program consists of tests of material properties, both mechanical and corrosion-mechanical. Detailed neutron fluxes calculation as well as stress and deformation calculations are part of the assessment. Model of change will be proposed in order to plan inspections of the facility. In situ measurements of internals will be used to monitor exact status of structure during operation. Tensile specimens manufactured from both base metal and model weld joint have been irradiated to the total fluences of 3-20 dpa. Changes of mechanical properties are tested by the tensile test, stress corrosion cracking tests are performed in the autoclave with water loop and active loading. Operation temperature, pressure and water chemistry are chosen for the tests. (author)

The mechanical environment modulates intracellular calcium oscillation activities of myofibroblasts.

Directory of Open Access Journals (Sweden)

Charles Godbout

Full Text Available Myofibroblast contraction is fundamental in the excessive tissue remodeling that is characteristic of fibrotic tissue contractures. Tissue remodeling during development of fibrosis leads to gradually increasing stiffness of the extracellular matrix. We propose that this increased stiffness positively feeds back on the contractile activities of myofibroblasts. We have previously shown that cycles of contraction directly correlate with periodic intracellular calcium oscillations in cultured myofibroblasts. We analyze cytosolic calcium dynamics using fluorescent calcium indicators to evaluate the possible impact of mechanical stress on myofibroblast contractile activity. To modulate extracellular mechanics, we seeded primary rat subcutaneous myofibroblasts on silicone substrates and into collagen gels of different elastic modulus. We modulated cell stress by cell growth on differently adhesive culture substrates, by restricting cell spreading area on micro-printed adhesive islands, and depolymerizing actin with Cytochalasin D. In general, calcium oscillation frequencies in myofibroblasts increased with increasing mechanical challenge. These results provide new insight on how changing mechanical conditions for myofibroblasts are encoded in calcium oscillations and possibly explain how reparative cells adapt their contractile behavior to the stresses occurring in normal and pathological tissue repair.

Numerical modelling of ductile damage mechanics coupled with an unconventional plasticity model

Directory of Open Access Journals (Sweden)

R. Fincato

2016-10-01

Full Text Available Ductility in metals includes the material’s capability to tolerate plastic deformations before partial or total degradation of its mechanical properties. Modelling this parameter is important in structure and component design because it can be used to estimate material failure under a generic multi-axial stress state. Previous work has attempted to provide accurate descriptions of the mechanical property degradation resulting from the formation, growth, and coalescence of microvoids in the medium. Experimentally, ductile damage is inherently linked with the accumulation of plastic strain; therefore, coupling damage and elastoplasticity is necessary for describing this phenomenon accurately. In this paper, we combine the approach proposed by Lemaitre with the features of an unconventional plasticity model, the extended subloading surface model, to predict material fatigue even for loading conditions below the yield stress

Mechanisms for radiation damage in DNA

International Nuclear Information System (INIS)

Sevilla, M.D.

1987-01-01

Several mechanisms are proposed for radiation damage to DNA and its constituents, and a series of experiments utilizing electron spin resonance spectrometry have been used to test the proposed mechanisms. In the past we have concentrated chiefly on investigating irradiated systems of DNA constituents. In this year's effort we have concentrated on radiation effects on DNA itself. In addition studies of radiation effects on lipids and model compounds have been performed which shed light on the only other proposed site for cell kill, the membrane

Comparability of estimating energy rebound effect should be based on uniform mechanism and benchmark: A reply to Du and Lin

International Nuclear Information System (INIS)

Li, Chengyu; Shao, Shuai; Yang, Lili; Yu, Mingliang

2016-01-01

Du and Lin (2015) argued that the estimation model of the economy-wide energy rebound effect proposed by Shao et al. (2014) should be revised and provided an alternative approach, which they considered to be more consistent with the definition of the rebound effect. However, in this comment, we do not find a valid correction or modification to our original model, because their criticism logic does not originate from the corresponding mechanism in Shao et al. (2014), and their estimation formula has a different benchmark with ours. Moreover, their data samples were also different from ours, generating the incomparable results, and there are some irrational results in the comment. Even based on different estimation formulas in the two studies and using the same estimation method and data sample, the comparison results show that the problem of the estimation formula in our previous study which they claimed does not really exist. We argue that this comment is not consistent with the principle of the rebound effect. Actually, their work can be only regarded as proposing an alternative approach for the estimate of the rebound effect. Therefore, their argument is not enough to overturn our previous study. - Highlights: • A reply to Du and Lin (2015), who questioned our previous study, is provided. • Their criticism logic does not originate from our corresponding mechanism. • Their estimation formula has a different benchmark with ours. • Different data samples in the two papers make their results incomparable. • Their argument is not enough to overturn our previous study.

Robust Position Control of Electro-mechanical Systems

OpenAIRE

Rong Mei; Mou Chen

2013-01-01

In this work, the robust position control scheme is proposed for the electro-mechanical system using the disturbance observer and backstepping control method. To the external unknown load of the electro-mechanical system, the nonlinear disturbance observer is given to estimate the external unknown load. Combining the output of the developed nonlinear disturbance observer with backstepping technology, the robust position control scheme is proposed for the electro-mechanical system. The stabili...

Design Optimization of Steering Mechanisms for Articulated Off-Road Vehicles Based on Genetic Algorithms

Directory of Open Access Journals (Sweden)

Chen Zhou

2018-02-01

Full Text Available Two cylinders arranged symmetrically on a frame have become a major form of steering mechanism for articulated off-road vehicles (AORVs. However, the differences of stroke and arm lead to pressure fluctuation, vibration noise, and a waste of torque. In this paper, the differences of stroke and arm are reduced based on a genetic algorithm (GA. First, the mathematical model of the steering mechanism is put forward. Then, the difference of stroke and arm are optimized using a GA. Finally, a FW50GLwheel loader is used as an example to demonstrate the proposed GA-based optimization method, and its effectiveness is verified by means of automatic dynamic analysis of mechanical systems (ADAMS. The stroke difference of the steering hydraulic cylinders was reduced by 92% and the arm difference reached a decrease of 78% through GA optimization, in comparison with unoptimized structures. The simulation result shows that the steering mechanism optimized by GA behaved better than by previous methods.

Space Creation Mechanism during the Expansion of Universe

Directory of Open Access Journals (Sweden)

Emre Dil

2016-01-01

Full Text Available We propose a novel mechanism related to the expansion of universe. Recently Verlinde’s proposal has been applied to the deformed bosons being a candidate for the dark energy constituents, since the negative pressure of the deformed bosons. The expansion of universe is dependent on the dark energy and implies a creation of space; we admit that the space creation mechanism is related to the deformed bosons and so is the dark energy. In order to relate the dark energy and the mechanism for creation of space, we consider Verlinde’s proposal including the Holographic principle for emergence of space, which was recently applied to the deformed bosons. To check the validity of our mechanism, we calculate the ratio of the size of universe before and after the expansion and compare the results with the observational data. We find that the results are consistent with each other and infer that the proposed mechanism works correctly.

Multiresolution molecular mechanics: Surface effects in nanoscale materials

Energy Technology Data Exchange (ETDEWEB)

Yang, Qingcheng, E-mail: qiy9@pitt.edu; To, Albert C., E-mail: albertto@pitt.edu

2017-05-01

Surface effects have been observed to contribute significantly to the mechanical response of nanoscale structures. The newly proposed energy-based coarse-grained atomistic method Multiresolution Molecular Mechanics (MMM) (Yang, To (2015), ) is applied to capture surface effect for nanosized structures by designing a surface summation rule SR{sup S} within the framework of MMM. Combined with previously proposed bulk summation rule SR{sup B}, the MMM summation rule SR{sup MMM} is completed. SR{sup S} and SR{sup B} are consistently formed within SR{sup MMM} for general finite element shape functions. Analogous to quadrature rules in finite element method (FEM), the key idea to the good performance of SR{sup MMM} lies in that the order or distribution of energy for coarse-grained atomistic model is mathematically derived such that the number, position and weight of quadrature-type (sampling) atoms can be determined. Mathematically, the derived energy distribution of surface area is different from that of bulk region. Physically, the difference is due to the fact that surface atoms lack neighboring bonding. As such, SR{sup S} and SR{sup B} are employed for surface and bulk domains, respectively. Two- and three-dimensional numerical examples using the respective 4-node bilinear quadrilateral, 8-node quadratic quadrilateral and 8-node hexahedral meshes are employed to verify and validate the proposed approach. It is shown that MMM with SR{sup MMM} accurately captures corner, edge and surface effects with less 0.3% degrees of freedom of the original atomistic system, compared against full atomistic simulation. The effectiveness of SR{sup MMM} with respect to high order element is also demonstrated by employing the 8-node quadratic quadrilateral to solve a beam bending problem considering surface effect. In addition, the introduced sampling error with SR{sup MMM} that is analogous to numerical integration error with quadrature rule in FEM is very small. - Highlights: �

Underestimation of Severity of Previous Whiplash Injuries

Science.gov (United States)

Naqui, SZH; Lovell, SJ; Lovell, ME

2008-01-01

INTRODUCTION We noted a report that more significant symptoms may be expressed after second whiplash injuries by a suggested cumulative effect, including degeneration. We wondered if patients were underestimating the severity of their earlier injury. PATIENTS AND METHODS We studied recent medicolegal reports, to assess subjects with a second whiplash injury. They had been asked whether their earlier injury was worse, the same or lesser in severity. RESULTS From the study cohort, 101 patients (87%) felt that they had fully recovered from their first injury and 15 (13%) had not. Seventy-six subjects considered their first injury of lesser severity, 24 worse and 16 the same. Of the 24 that felt the violence of their first accident was worse, only 8 had worse symptoms, and 16 felt their symptoms were mainly the same or less than their symptoms from their second injury. Statistical analysis of the data revealed that the proportion of those claiming a difference who said the previous injury was lesser was 76% (95% CI 66–84%). The observed proportion with a lesser injury was considerably higher than the 50% anticipated. CONCLUSIONS We feel that subjects may underestimate the severity of an earlier injury and associated symptoms. Reasons for this may include secondary gain rather than any proposed cumulative effect. PMID:18201501

On Galilean covariant quantum mechanics

International Nuclear Information System (INIS)

Horzela, A.; Kapuscik, E.; Kempczynski, J.; Joint Inst. for Nuclear Research, Dubna

1991-08-01

Formalism exhibiting the Galilean covariance of wave mechanics is proposed. A new notion of quantum mechanical forces is introduced. The formalism is illustrated on the example of the harmonic oscillator. (author)

A potential mechanism for allometric trabecular bone scaling in terrestrial mammals.

Science.gov (United States)

Christen, Patrik; Ito, Keita; van Rietbergen, Bert

2015-03-01

Trabecular bone microstructural parameters, including trabecular thickness, spacing, and number, have been reported to scale with animal size with negative allometry, whereas bone volume fraction is animal size-invariant in terrestrial mammals. As for the majority of scaling patterns described in animals, its underlying mechanism is unknown. However, it has also been found that osteocyte density is inversely related to animal size, possibly adapted to metabolic rate, which shows a negative relationship as well. In addition, the signalling reach of osteocytes is limited by the extent of the lacuno-canalicular network, depending on trabecular dimensions and thus also on animal size. Here we propose animal size-dependent variations in osteocyte density and their signalling influence distance as a potential mechanism for negative allometric trabecular bone scaling in terrestrial mammals. Using an established and tested computational model of bone modelling and remodelling, we run simulations with different osteocyte densities and influence distances mimicking six terrestrial mammals covering a large range of body masses. Simulated trabecular structures revealed negative allometric scaling for trabecular thickness, spacing, and number, constant bone volume fraction, and bone turnover rates inversely related to animal size. These results are in agreement with previous observations supporting our proposal of osteocyte density and influence distance variation as a potential mechanism for negative allometric trabecular bone scaling in terrestrial mammals. The inverse relationship between bone turnover rates and animal size further indicates that trabecular bone scaling may be linked to metabolic rather than mechanical adaptations. © 2015 Anatomical Society.

Technical-evaluation report on the proposed technical-specification changes for the inservice surveillance of safety-related hydraulic and mechanical snubbers at the Millstone Nuclear Power Station, Unit 2 (Docket No. 50-336)

International Nuclear Information System (INIS)

Selan, J.C.

1983-01-01

This report documents the technical evaluation of the proposed Technical Specification changes to Limiting Conditions for Operation, Surveillance Requirements and Bases for safety-related hydraulic and mechanical snubbers at the Millstone Nuclear Power Station, Unit 2. The evaluation is to determine whether the proposed Technical Specifications are in conformance with the model Standard Technical Specification set forth by the NRC. A check list, Appendix A of this report, compares the licensee's submittal with the NRC requirements and includes Proposed Resolution of the Deviations

A Mechanism for Anonymous Credit Card Systems

Science.gov (United States)

Tamura, Shinsuke; Yanase, Tatsuro

This paper proposes a mechanism for anonymous credit card systems, in which each credit card holder can conceal individual transactions from the credit card company, while enabling the credit card company to calculate the total expenditures of transactions of individual card holders during specified periods, and to identify card holders who executed dishonest transactions. Based on three existing mechanisms, i.e. anonymous authentication, blind signature and secure statistical data gathering, together with implicit transaction links proposed here, the proposed mechanism enables development of anonymous credit card systems without assuming any absolutely trustworthy entity like tamper resistant devices or organizations faithful both to the credit card company and card holders.

Mechanisms for radiation damage in DNA. Progress report, November 1, 1978-October 31, 1979

International Nuclear Information System (INIS)

Sevilla, M.D.

1979-07-01

Several mechanisms for radiation damage to DNA constituents and DNA are proposed, and a series of experiments utilizing electron spin resonance spectrometry to test the proposed mechanisms are detailed. In the past we have concentrated chiefly on the direct affect of radiation on DNA. We are currently investigating systems of DNA constituents and peptides which may shed light on indirect effects. Studies which have been completed during the past year include: (1) studies of γ-irradiated N-acetyl amino acids and peptide solutions at 77 0 K; and (2) studies of barriers to hindered rotation in peptide radicals. Studies in which progress has been made in this past year include: (1) π cations produced in DNA bases by hydroxyl radical attack; and (2) studies of spin transfer in γ-Irradiated nucleoside-peptide solutions. These studies have shown that: (1) frozen aqueous solutions provide a suitable matrix for γ irradiation studies; (2) γ-irradiated peptides in frozen aqueous solutions follow chemistry expected from previous studies; and (3) π cations of DNA base can be produced by hydroxyl radical attack

Methodological proposal for the analysis of user participation mechanisms in online media

Directory of Open Access Journals (Sweden)

Jaime Alonso, Ph.D.

2012-01-01

Full Text Available This paper presents the results of an analysis of user participation mechanisms, particularly those based in Web 2.0 technologies and applications, based on a sample of fourteen relevant Spanish online media, including the websites of newspapers, radio stations, and television channels. This analysis was conducted in October and November 2010 as part of the research subproject La evolución de los cibermedios en el marco de la convergencia digital. Tecnología y distribución (The evolution of online media in the context of digital convergence. Tecnology and distribution. The study is based on a taxonomy of the different user participation mechanisms, which distinguishes between those that are integrated within the media’s news sections and those that are independent spaces. The analysis also examines the form in which these mechanisms are managed by the media in function of the role they are assigned. Finally, the study aims to compare the different online media and to show examples and trends in the field of user participation.

Vibrating Wingstroke Mechanism, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — This proposed work will develop a new method and mechanism for generating wing stroke motion of any shape and orientation. The mechanism will provide power, lift and...

Role of the reacting free radicals on the antioxidant mechanism of curcumin

Energy Technology Data Exchange (ETDEWEB)

Galano, Annia, E-mail: agalano@prodigy.net.mx [Universidad Autonoma Metropolitana-Iztapalapa, Departamento de Quimica, Area de Quimica Analitica, San Rafael Atlixco 186, Col. Vicentina, Iztapalapa, C.P. 09340, Mexico D.F. (Mexico); Alvarez-Diduk, Ruslan; Ramirez-Silva, Maria Teresa; Alarcon-Angeles, Georgina; Rojas-Hernandez, Alberto [Universidad Autonoma Metropolitana-Iztapalapa, Departamento de Quimica, Area de Quimica Analitica, San Rafael Atlixco 186, Col. Vicentina, Iztapalapa, C.P. 09340, Mexico D.F. (Mexico)

2009-09-18

Density functional theory is used to study the antioxidant mechanism of curcumin. Five different mechanisms are considered: single electron transfer (SET), radical adduct formation (RAF), H atom transfer from neutral curcumin (HAT), H atom transfer from deprotonated curcumin (HAT-D), and sequential proton loss electron transfer (SPLET). The influence of the environment is investigated for polar and non-polar surroundings. The apparent contradictions among previous experimental results are explained by the role of the nature of the reacting free radical on the relative importance of the above mentioned mechanism. It is proposed that the curcumin + DPPH reaction actually takes place mainly through the SPLET mechanism, while the reaction with {sup {center_dot}}OCH{sub 3}, and likely with other alkoxyl radicals, is governed by the HAT mechanism. Branching ratios for the {sup {center_dot}}OCH{sub 3} + curcumin reaction are reported for the first time. The calculated overall rate constants for this reaction are 1.16 x 10{sup 10} (benzene) and 5.52 x 10{sup 9} (water) L mol{sup -1} s{sup -1}. The role of phenolic groups on the antioxidant activity of curcumin has been experimentally confirmed.

The Newtonian form of wave mechanics

International Nuclear Information System (INIS)

Kapuscik, E.

1984-01-01

Following the general principles of both Newton's mechanics and quantum mechanics a new formulation of wave mechanics is proposed. The new basic equations do not contain physical parameters and admit a different interpretation of the Planck constant. (author)

SONOGRAPHIC PREDICTION OF SCAR DEHISCENCE IN WOMEN WITH PREVIOUS CAESAREAN SECTION

Directory of Open Access Journals (Sweden)

Shubhada Suhas Jajoo

2018-01-01

Full Text Available BACKGROUND Caesarean section (Sectio Caesarea is a surgical method for the completion of delivery. After various historical modifications of operative techniques, modern approach consists in the transverse dissection of the anterior wall of the uterus. The rate of vaginal birth after caesarean section was significantly reduced from year to year and the rate of repeated caesarean section is increased during the past 10 years. Evaluation of scar thickness is done by ultrasound, but it is still debatable size of thick scar that would be guiding “cut-off value” for the completion of the delivery method. To better assess the risk of uterine rupture, some authors have proposed sonographic measurement of lower uterine segment thickness near term assuming that there is an inverse correlation between LUS thickness and the risk of uterine scar defect. Therefore, this assessment for the management of women with prior CS may increase safety during labour by selecting women with the lowest risk of uterine rupture. The aim of the study is to study the diagnostic accuracy of sonographic measurements of the Lower Uterine Segment (LUS thickness near term in predicting uterine scar defects in women with prior Caesarean Section (CS. We aim to ascertain the best cut-off values for predicting uterine rupture. MATERIALS AND METHODS 100 antenatal women with history of previous one LSCS who come to attend antenatal clinic will be assessed for scar thickness by transabdominal ultrasonography and its correlation with intraoperative findings. This prospective longitudinal study was conducted for 1 year after IEC approval with inclusion criteria previous one LSCS. Exclusion criteria- 1 Previous myomectomy scar; 2 Previous 2 LSCS; 3 Previous hysterotomy scar. RESULTS Our findings indicate that there is a strong association between degree of LUS thinning measured near term and the risk of uterine scar defect at birth. In our study, optimal cut-off value for predicting

L-ALLIANCE: a mechanism for adaptive action selection in heterogeneous multi-robot teams

Energy Technology Data Exchange (ETDEWEB)

Parker, L.E.

1995-11-01

In practical applications of robotics, it is usually quite difficult, if not impossible, for the system designer to fully predict the environmental states in which the robots will operate. The complexity of the problem is further increased when dealing with teams of robots which themselves may be incompletely known and characterized in advance. It is thus highly desirable for robot teams to be able to adapt their performance during the mission due to changes in the environment, or to changes in other robot team members. In previous work, we introduced a behavior-based mechanism called the ALLIANCE architecture -- that facilitates the fault tolerant cooperative control of multi-robot teams. However, this previous work did not address the issue of how to dynamically update the control parameters during a mission to adapt to ongoing changes in the environment or in the robot team, and to ensure the efficiency of the collective team actions. In this paper, we address this issue by proposing the L-ALLIANCE mechanism, which defines an automated method whereby robots can use knowledge learned from previous experience to continually improve their collective action selection when working on missions composed of loosely coupled, discrete subtasks. This ability to dynamically update robotic control parameters provides a number of distinct advantages: it alleviates the need for human tuning of control parameters, it facilitates the use of custom-designed multi-robot teams for any given application, it improves the efficiency of the mission performance, and It allows robots to continually adapt their performance over time due to changes in the robot team and/or the environment. We describe the L-ALLIANCE mechanism, present the results of various alternative update strategies we investigated, present the formal model of the L-ALLIANCE mechanism, and present the results of a simple proof of concept implementation on a small team of heterogeneous mobile robots.

Technical-evaluation report on the proposed technical-specification changes for the inservice surveillance of safety-related hydraulic and mechanical snubbers at the James A. Fitzpatrick Nuclear Power Plant (Docket No. 50-333)

International Nuclear Information System (INIS)

Selan, J.C.

1983-01-01

This report documents the technical evaluation of the proposed Technical Specification changes to Limiting Conditions for Operation, Surveillance Requirements and Bases for safety-related hydraulic and mechanical snubbers at the James A. FitzPatrick Nuclear Power Plant. The evaluation is to determine whether the proposed Technical Specifications are in conformance with the model Standard Technical Specification set forth by the NRC. A check list, Appendix A of this report, compares the licensee's submittal with the NRC requirements and includes Proposed Resolution of the Deviations

Proposal of a resolution aiming at creating an inquiry commission about the conditions of formation and the evolution mechanisms of energy prices

International Nuclear Information System (INIS)

2008-01-01

The aim of this proposal is to create a commission with the following missions: 1 - defining the different elements which compose the prices of petroleum, gas, electricity and alternative energies; 2 - describing the mechanisms of their evolution; 3 - studying the impact for consumers of the European deregulation of energy markets; 4 - identifying the short- and medium-term manoeuvre margin of the public authority in the control of prices change effects on households budget; 5 - determining, by analysing other European country policies, the medium- and long-term means necessary to implement a policy of energy efficiency. (J.S.)

Hierarchical assembly strategy and multiscale structural origin of exceptional mechanical performance in nacre

Science.gov (United States)

Huang, Zaiwang

Nacre (mother of pearl) is a self-assembled hierarchical nanocomposite in possession of exquisite multiscale architecture and exceptional mechanical properties. Previous work has shown that the highly-ordered brick-mortar-like structure in nacre is assembled via epitaxial growth and the aragonite platelets are pure single-crystals. Our results challenge this conclusion and propose that nacre's individual aragonite platelets are constructed with highly-aligned aragonite nanoparticles mediated by screw dislocation and amorphous aggregation. The underlying physics mechanism why the aragonite nanoparticles choose highly-oriented attachment as its crystallization pathway is rationalized in terms of thermodynamics. The aragonite nanoparticle order-disorder transformation can be triggered by high temperature and mechanical deformation, which in turn confirms that the aragonite nanoparticles are basic building blocks for aragonite platelets. Particularly fascinating is the fracture toughness enhancement of nacre through exquisitely collecting mechanically inferior calcium carbonate (CaCO3) and biomolecules. The sandwich-like microarchitecture with a geometrically staggered arrangement can induce crack deflection along its biopolymer interface, thus significantly enhancing nacre's fracture toughness. Our new findings ambiguously demonstrate that, aside from crack deflection, the advancing crack can invade aragonite platelet, leaving a zigzag crack propagation pathway. These unexpected experimental observations disclose, for the first time, the inevitable structural role of aragonite platelets in enhancing nacre's fracture toughness. Simultaneously, the findings that the crack propagates in a zigzag manner within individual aragonite platelets overturn the previously well-established wisdom that considers aragonite platelets as brittle single-crystals. Moreover, we investigated the dynamical mechanical response of nacre under unixial compression. Our results show that the

The (neurocognitive mechanisms behind attention bias modification in anxiety: Proposals based on theoretical accounts of attentional bias

Directory of Open Access Journals (Sweden)

Alexandre eHeeren

2013-04-01

Full Text Available Recently, researchers have investigated the causal nature of attentional bias for threat (AB in the maintenance of anxiety disorders by experimentally manipulating it. They found that training anxious individuals to attend to nonthreat stimuli reduces AB, which, in turn, reduces anxiety. This effect supports the hypothesis that AB can causally impact the maintenance of anxiety. At a fundamental level, however, uncertainty still abounds regarding the nature of the processes that mediate this effect. In the present paper, we propose that two contrasting approaches may be derived from theoretical accounts of AB. According to a first class of models, called the valence-specific bias models, modifying AB requires the modification of valence-specific attentional selectivity. According to a second class of models, called the attention control models, modifying AB requires the modification of attention control, driven by the recruitment of the dorsolateral prefrontal cortex. We formulate a series of specific predictions, to provide suggestions to trial these two approaches one against the other. This knowledge is critical for understanding the mechanisms of AB in anxiety disorders, which bares important clinical implications.

A Proposed Solution to the Scholarly Communications Crisis

Science.gov (United States)

Schatzle, Chad

2005-01-01

After reviewing the history and parameters of the scholarly communications crisis, particularly in regard to skyrocketing prices for journals in the natural sciences, the author reviews and rejects previously attempted solutions. He then employs the principles of game theory in proposing a new solution to the crisis.

Bomb-Pulse Chlorine-36 At The Proposed Yucca Mountain Repository Horizon: An Investigation Of Previous Conflicting Results And Collection Of New Data

International Nuclear Information System (INIS)

J. Cizdziel

2006-01-01

Previous studies by scientists at Los Alamos National Laboratory (LANL) found elevated ratios of chlorine-36 to total chloride ( 36 Cl/Cl) in samples of rock collected from the Exploratory Studies Facility (ESF) and the Enhanced Characterization of the Repository Block (ECRB) at Yucca Mountain as the tunnels were excavated. The data were interpreted as an indication that fluids containing 'bomb-pulse' 36 Cl reached the repository horizon in the ∼50 years since the peak period of above-ground nuclear testing. Moreover, the data support the concept that so-called fast pathways for infiltration not only exist but are active, possibly through a combination of porous media, faults and/or other geologic features. Due to the significance of 36 Cl data to conceptual models of unsaturated zone flow and transport, the United States Geological Survey (USGS) was requested by the Department of Energy (DOE) to design and implement a study to validate the LANL findings. The USGS chose to drill new boreholes at select locations across zones where bomb-pulse ratios had previously been identified. The drill cores were analyzed at Lawrence Livermore National Laboratory (LLNL) for 36 Cl/Cl using both active and passive leaches, with the USGS/LLNL concluding that the active leach extracted too much rock-Cl and the passive leach did not show bomb-pulse ratios. Because consensus was not reached between the USGS/LLNL and LANL on several fundamental points, including the conceptual strategy for sampling, interpretation and use of tritium ( 3 H) data, and the importance and interpretation of blanks, in addition to the presence or absence of bomb-pulse 36 Cl, an evaluation by an independent entity, the University of Nevada, Las Vegas (UNLV), using new samples was initiated. This report is the result of that study. The overall objectives of the UNLV study were to investigate the source or sources of the conflicting results from the previous validation study, and to obtain additional data to

Maternal condition and previous reproduction interact to affect offspring sex in a wild mammal.

Science.gov (United States)

Douhard, Mathieu; Festa-Bianchet, Marco; Pelletier, Fanie

2016-08-01

Trivers and Willard proposed that offspring sex ratio should vary with maternal condition when condition, meant as maternal capacity to care, has different fitness consequences for sons and daughters. In polygynous and dimorphic species, mothers in good condition should preferentially produce sons, whereas mothers in poor condition should produce more daughters. Despite its logical appeal, support for this hypothesis has been inconsistent. Sex-ratio variation may be influenced by additional factors, such as environmental conditions and previous reproduction, which are often ignored in empirical studies. We analysed 39 years of data on bighorn sheep (Ovis canadensis) that fit all the assumptions of the Trivers-Willard hypothesis. Production of sons increased with maternal condition only for mothers that weaned a son the previous year. This relationship likely reflects a mother's ability to bear the higher reproductive costs of sons. The interaction between maternal condition and previous weaning success on the probability of producing a son was independent of the positive effect of paternal reproductive success. Maternal and paternal effects accounted for similar proportions of the variance in offspring sex. Maternal reproductive history should be considered in addition to current condition in studies of sex allocation. © 2016 The Author(s).

Mechanical stress-controlled tunable active frequency-selective surface

Science.gov (United States)

Huang, Bo-Cin; Hong, Jian-Wei; Lo, Cheng-Yao

2017-01-01

This study proposes a tunable active frequency-selective surface (AFSS) realized by mechanically expanding or contracting a split-ring resonator (SRR) array. The proposed AFSS transfers mechanical stress from its elastic substrate to the top of the SRR, thereby achieving electromagnetic (EM) modulation without the need for an additional external power supply, meeting the requirements for the target application: the invisibility cloak. The operating mechanism of the proposed AFSS differs from those of other AFSSs, supporting modulations in arbitrary frequencies in the target range. The proposed stress-controlled or strain-induced EM modulation proves the existence of an identical and linear relationship between the strain gradient and the frequency shift, implying its suitability for other EM modulation ranges and applications.

Hyponatraemia and hypothyroidism in a previously irradiated case of carcinoma of the tongue

International Nuclear Information System (INIS)

Nasser, N.A.; Lever, E.G.

1987-01-01

A case of squamous cell carcinoma of the tongue was complicated by post operative hyponatraemia. The criteria for the syndrome of inappropriate secretion of anti diuretic hormone, (ADH) (SIADH) were met but the patient remained hyponatraemic despite adequate treatment. The patient had previously received radical external radiotherapy to the neck and was found to be profoundly hypothyroid. Correction of the hypothyroid state led to clinical and biochemical recovery. The frequency of post-irradiation hypothyroidism and the possible mechanisms of hypothyroid-induced hyponatraemia are discussed. (author)

Abnormal flow behavior and necklace microstructure of powder metallurgy superalloys with previous particle boundaries (PPBs)

Energy Technology Data Exchange (ETDEWEB)

Ning, Yongquan, E-mail: luckyning@nwpu.edu.cn [School of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an 710072 (China); Zhou, Cong; Liang, Houquan [School of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an 710072 (China); Fu, M.W., E-mail: mmmwfu@polyu.edu.hk [Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong (China)

2016-01-15

Powder metallurgy (P/M) has been introduced as an innovative process to manufacture high performance components with fine, homogenous and segregation-free microstructure. Unfortunately, previous particle boundary (PPB) precipitated during the powder metallurgy process. Since undesirable PPB is detrimental to mechanical properties, hot extrusion or/and isothermal forging are needed. In present research, isothermal compression tests were conducted on P/M FGH4096 superalloys with typical PPBs. Abnormal flow behavior during high-speed deformation has been quantitatively investigated. Caused by the competition mechanism between work-hardening and dynamic-softening, abnormal flow behaves typical four stages (viz., work-hardening, stable, softening and steady). Microstructure observation for hardening or/and softening mechanism has been investigated. Meanwhile, necklace microstructure was observed by scanning electron microscope, and the grain fraction analysis was performed by using electron backscatter diffraction. Transmission electron microscopy was used for characterizing the boundary structure. Necklace microstructural mechanism for processing P/M superalloys has been developed, and the dynamic recrystallization model has also been conducted. Bulge–corrugation model is the primary nucleation mechanism for P/M superalloys with PPBs. When PPB is entirely covered with new grains, necklace microstructure has formed. Bulge–corrugation mechanism can repeatedly take place in the following necklace DRX.

Mechanism of Neurodegeneration Following Viral Infection

National Research Council Canada - National Science Library

Maheshwari, Radha

2001-01-01

The long term goal of this proposal is to delineate the mechanism(s) for neurodegeneration and neuropathogenesis following infection with a neurovirulent virus, Venezuelan equine encephalitis virus (VEE...

Mechanism of bonding and debonding using surface activated bonding method with Si intermediate layer

Science.gov (United States)

Takeuchi, Kai; Fujino, Masahisa; Matsumoto, Yoshiie; Suga, Tadatomo

2018-04-01

Techniques of handling thin and fragile substrates in a high-temperature process are highly required for the fabrication of semiconductor devices including thin film transistors (TFTs). In our previous study, we proposed applying the surface activated bonding (SAB) method using Si intermediate layers to the bonding and debonding of glass substrates. The SAB method has successfully bonded glass substrates at room temperature, and the substrates have been debonded after heating at 450 °C, in which TFTs are fabricated on thin glass substrates for LC display devices. In this study, we conducted the bonding and debonding of Si and glass in order to understand the mechanism in the proposed process. Si substrates are also successfully bonded to glass substrates at room temperature and debonded after heating at 450 °C using the proposed bonding process. By the composition analysis of bonding interfaces, it is clarified that the absorbed water on the glass forms interfacial voids and cause the decrease in bond strength.

Teletactile System Based on Mechanical Properties Estimation

Directory of Open Access Journals (Sweden)

Mauro M. Sette

2011-01-01

Full Text Available Tactile feedback is a major missing feature in minimally invasive procedures; it is an essential means of diagnosis and orientation during surgical procedures. Previous works have presented a remote palpation feedback system based on the coupling between a pressure sensor and a general haptic interface. Here a new approach is presented based on the direct estimation of the tissue mechanical properties and finally their presentation to the operator by means of a haptic interface. The approach presents different technical difficulties and some solutions are proposed: the implementation of a fast Young’s modulus estimation algorithm, the implementation of a real time finite element model, and finally the implementation of a stiffness estimation approach in order to guarantee the system’s stability. The work is concluded with an experimental evaluation of the whole system.

Mechanism of Selenium Loss in Copper Slag

Science.gov (United States)

Desai, Bhavin; Tathavadkar, Vilas; Basu, Somnath

2018-03-01

During smelting of copper sulfide concentrate, selenium is distributed between silica-saturated iron-silicate slag and copper-iron sulfide matte. The recovery coefficients of selenium between slag and matte were determined as a function of the initial concentration of selenium at 1523 K (1250 °C) under an inert atmosphere in a vertical tubular furnace. The initial concentration of selenium was varied by the addition of metallic selenium as well as selenium dioxide to the mixture of slag and matte. Analysis of the results indicated high affinity of selenium for matte. The apparent loss of selenium with the slag was attributed to the presence of selenium-enriched matte particles entrapped in the slag, rather than dissolved SeO2. The mechanisms proposed by previous investigators were discussed and also compared with the results of the present investigation.

Mechanism of Selenium Loss in Copper Slag

Science.gov (United States)

Desai, Bhavin; Tathavadkar, Vilas; Basu, Somnath

2018-06-01

During smelting of copper sulfide concentrate, selenium is distributed between silica-saturated iron-silicate slag and copper-iron sulfide matte. The recovery coefficients of selenium between slag and matte were determined as a function of the initial concentration of selenium at 1523 K (1250 °C) under an inert atmosphere in a vertical tubular furnace. The initial concentration of selenium was varied by the addition of metallic selenium as well as selenium dioxide to the mixture of slag and matte. Analysis of the results indicated high affinity of selenium for matte. The apparent loss of selenium with the slag was attributed to the presence of selenium-enriched matte particles entrapped in the slag, rather than dissolved SeO2. The mechanisms proposed by previous investigators were discussed and also compared with the results of the present investigation.

Energy storage and dispersion of surface acoustic waves trapped in a periodic array of mechanical resonators

DEFF Research Database (Denmark)

Dühring, Maria Bayard; Laude, Vincent; Khelif, Abdelkrim

2009-01-01

It has been shown previously that surface acoustic waves can be efficiently trapped and slowed by steep ridges on a piezoelectric substrate, giving rise to two families of shear-horizontal and vertically polarized surface waves. The mechanisms of energy storage and dispersion are explored by using...... the finite element method to model surface acoustic waves generated by high aspect ratio electrodes. A periodic model is proposed including a perfectly matched layer to simulate radiation conditions away from the sources, from which the modal distributions are found. The ratio of the mechanical energy...... confined to the electrode as compared to the total mechanical energy is calculated and is found to be increasing for increasing aspect ratio and to tend to a definite limit for the two families of surface waves. This observation is in support of the interpretation that high aspect ratio electrodes act...

Caribbean alternative energy programme project proposals

International Nuclear Information System (INIS)

1978-03-01

This is the third report to follow the Project Group Meeting on ALTERNATIVE ENERGY RESOURCES, Barbados, September, 1977. It consists of summaries of projects proposals identified at the Meeting. The first two reports have been previously circulated. The first CSC(77)AER-1 covers the background, proceedings and recommendations resulting from the meeting as well as containing a brief outline of the project proposals. The country papers and technical papers that were presented at the meeting or served as background material, form the second report, CSC(77)AER-2. Copies of the first two reports can be obtained on request to the Commonwealth Science Council. Projects with potential for making significant progress in the short term have been marked with an asterisk

Pricing Mechanism in Information Goods

OpenAIRE

Li, Xinming; Wang, Huaqing

2018-01-01

We study three pricing mechanisms' performance and their effects on the participants in the data industry from the data supply chain perspective. A win-win pricing strategy for the players in the data supply chain is proposed. We obtain analytical solutions in each pricing mechanism, including the decentralized and centralized pricing, Nash Bargaining pricing, and revenue sharing mechanism.

Localized palmar-plantar epidermal hyperplasia: a previously undefined dermatologic toxicity to sorafenib.

Science.gov (United States)

Beldner, Matthew; Jacobson, Michael; Burges, Gene E; Dewaay, Deborah; Maize, John C; Chaudhary, Uzair B

2007-10-01

The development of multitargeted tyrosine kinase inhibitors has provided significant advances in the treatment of renal cell carcinoma. This case describes initial therapy for managing renal cell cancer with the administration of sorafenib, a multitargeted tyrosine kinase inhibitor. We report the development of localized palmar-plantar epidermal hyperplasia, a rare but significant cutaneous adverse event from sorafenib therapy. Mild-to-moderate dermatologic toxicity from sorafenib has been well described in the literature. We also review the current knowledge and the proposed hypothesis for the development of cutaneous events related to tyrosine kinase inhibitors. This particular case represents a unique form of dermatologic toxicity to sorafenib that has not previously been described in the literature.

Technical-evaluation report on the proposed technical-specification changes for the inservice surveillance of safety-related hydraulic and mechanical snubbers at the Indian Point Nuclear Power Plant, Unit 3 (Docket No. 50-286)

International Nuclear Information System (INIS)

Selan, J.C.

1983-01-01

This report documents the technical evaluation of the proposed Technical Specification changes to Limiting Conditions for Operation, Surveillance Requirements and Bases for safety-related hydraulic and mechanical snubbers at the Indian Point Nuclear Power Plant, Unit 3. The evaluation is to determine whether the proposed Technical Specifications are in conformance with the model Standard Technical Specification set forth by the NRC. A check list, Appendix A of this report, compares the licensee's submittal with the NRC requirements and includes Proposed Resolution of the Deviations

Structure and mechanism of the ATPase that powers viral genome packaging.

Science.gov (United States)

Hilbert, Brendan J; Hayes, Janelle A; Stone, Nicholas P; Duffy, Caroline M; Sankaran, Banumathi; Kelch, Brian A

2015-07-21

Many viruses package their genomes into procapsids using an ATPase machine that is among the most powerful known biological motors. However, how this motor couples ATP hydrolysis to DNA translocation is still unknown. Here, we introduce a model system with unique properties for studying motor structure and mechanism. We describe crystal structures of the packaging motor ATPase domain that exhibit nucleotide-dependent conformational changes involving a large rotation of an entire subdomain. We also identify the arginine finger residue that catalyzes ATP hydrolysis in a neighboring motor subunit, illustrating that previous models for motor structure need revision. Our findings allow us to derive a structural model for the motor ring, which we validate using small-angle X-ray scattering and comparisons with previously published data. We illustrate the model's predictive power by identifying the motor's DNA-binding and assembly motifs. Finally, we integrate our results to propose a mechanistic model for DNA translocation by this molecular machine.

Damping Oriented Design of Thin-Walled Mechanical Components by Means of Multi-Layer Coating Technology

Directory of Open Access Journals (Sweden)

Giuseppe Catania

2018-02-01

Full Text Available The damping behaviour of multi-layer composite mechanical components, shown by recent research and application papers, is analyzed. A local dissipation mechanism, acting at the interface between any two different layers of the composite component, is taken into account, and a beam model, to be used for validating the known experimental results, is proposed. Multi-layer prismatic beams, consisting of a metal substrate and of some thin coated layers exhibiting variable stiffness and adherence properties, are considered in order to make it possible to study and validate this assumption. A dynamical model, based on a simple beam geometry but taking into account the previously introduced local dissipation mechanism and distributed visco-elastic constraints, is proposed. Some different application examples of specific multi-layer beams are considered, and some numerical examples concerning the beam free and forced response are described. The influence of the multilayer system parameters on the damping behaviour of the free and forced response of the composite beam is investigated by means of the definition of some damping estimators. Some effective multi-coating configurations, giving a relevant increase of the damping estimators of the coated structure with respect to the same uncoated structure, are obtained from the model simulation, and the results are critically discussed.

Final focus test beam alignment: A draft proposal

International Nuclear Information System (INIS)

Fischer, G.E.; Ruland, R.E.

1989-03-01

The Final Focus Test Beam is a transport line designed to transmit 50 GeV electron beams of SLC emittance (3 x 10 -10 radian-meters) straight through the central arm of the Beam Switchyard (BSY C line) with a final focus point out in the Research Yard but relatively near the end of the switchyard tunnel. The hardware, methods and procedures outlined in this proposal are dedicated to measuring the placement of mechanical objects with respect to certain defined geometric axes. We wish to emphasize that the very difficult problems of locating the effective magnetic axes of focusing elements, the effective electrical center of beam position monitors and even the effective axis of the incident beam relative to mechanical reference surfaces is outside the scope of this work. Further, this proposal is restricted to the act of measurement and does not consider the vital task of on-line mechanical repositioning of elements that will, in likelihood, be called upon during operation of the system. 16 refs., 16 figs., 4 tabs

The Effects of the Previous Outcome on Probabilistic Choice in Rats

Science.gov (United States)

Marshall, Andrew T.; Kirkpatrick, Kimberly

2014-01-01

This study examined the effects of previous outcomes on subsequent choices in a probabilistic-choice task. Twenty-four rats were trained to choose between a certain outcome (1 or 3 pellets) versus an uncertain outcome (3 or 9 pellets), delivered with a probability of .1, .33, .67, and .9 in different phases. Uncertain outcome choices increased with the probability of uncertain food. Additionally, uncertain choices increased with the probability of uncertain food following both certain-choice outcomes and unrewarded uncertain choices. However, following uncertain-choice food outcomes, there was a tendency to choose the uncertain outcome in all cases, indicating that the rats continued to “gamble” after successful uncertain choices, regardless of the overall probability or magnitude of food. A subsequent manipulation, in which the probability of uncertain food varied within each session as a function of the previous uncertain outcome, examined how the previous outcome and probability of uncertain food affected choice in a dynamic environment. Uncertain-choice behavior increased with the probability of uncertain food. The rats exhibited increased sensitivity to probability changes and a greater degree of win–stay/lose–shift behavior than in the static phase. Simulations of two sequential choice models were performed to explore the possible mechanisms of reward value computations. The simulation results supported an exponentially decaying value function that updated as a function of trial (rather than time). These results emphasize the importance of analyzing global and local factors in choice behavior and suggest avenues for the future development of sequential-choice models. PMID:23205915

Mechanics without mechanisms

Science.gov (United States)

Eisenthal, Joshua

2018-05-01

At the time of Heinrich Hertz's premature death in 1894, he was regarded as one of the leading scientists of his generation. However, the posthumous publication of his treatise in the foundations of physics, Principles of Mechanics, presents a curious historical situation. Although Hertz's book was widely praised and admired, it was also met with a general sense of dissatisfaction. Almost all of Hertz's contemporaries criticized Principles for the lack of any plausible way to construct a mechanism from the "hidden masses" that are particularly characteristic of Hertz's framework. This issue seemed especially glaring given the expectation that Hertz's work might lead to a model of the underlying workings of the ether. In this paper I seek an explanation for why Hertz seemed so unperturbed by the difficulties of constructing such a mechanism. In arriving at this explanation, I explore how the development of Hertz's image-theory of representation framed the project of Principles. The image-theory brings with it an austere view of the "essential content" of mechanics, only requiring a kind of structural isomorphism between symbolic representations and target phenomena. I argue that bringing this into view makes clear why Hertz felt no need to work out the kinds of mechanisms that many of his readers looked for. Furthermore, I argue that a crucial role of Hertz's hypothesis of hidden masses has been widely overlooked. Far from acting as a proposal for the underlying structure of the ether, I show that Hertz's hypothesis ruled out knowledge of such underlying structure.

Researchers Find a Mechanism for Schizophrenia

Science.gov (United States)

... issue Health Capsule Researchers Find a Mechanism for Schizophrenia En español Send us your comments Scientists uncovered a mechanism behind genetic variations previously linked to schizophrenia. The findings may lead to new clinical approaches. ...

The morphology and adhesion mechanism of Octopus vulgaris suckers.

Directory of Open Access Journals (Sweden)

Francesca Tramacere

Full Text Available The octopus sucker represents a fascinating natural system performing adhesion on different terrains and substrates. Octopuses use suckers to anchor the body to the substrate or to grasp, investigate and manipulate objects, just to mention a few of their functions. Our study focuses on the morphology and adhesion mechanism of suckers in Octopus vulgaris. We use three different techniques (MRI, ultrasonography, and histology and a 3D reconstruction approach to contribute knowledge on both morphology and functionality of the sucker structure in O. vulgaris. The results of our investigation are two-fold. First, we observe some morphological differences with respect to the octopus species previously studied (i.e., Octopus joubini, Octopus maya, Octopus bimaculoides/bimaculatus and Eledone cirrosa. In particular, in O. vulgaris the acetabular chamber, that is a hollow spherical cavity in other octopuses, shows an ellipsoidal cavity which roof has an important protuberance with surface roughness. Second, based on our findings, we propose a hypothesis on the sucker adhesion mechanism in O. vulgaris. We hypothesize that the process of continuous adhesion is achieved by sealing the orifice between acetabulum and infundibulum portions via the acetabular protuberance. We suggest this to take place while the infundibular part achieves a completely flat shape; and, by sustaining adhesion through preservation of sucker configuration. In vivo ultrasonographic recordings support our proposed adhesion model by showing the sucker in action. Such an underlying physical mechanism offers innovative potential cues for developing bioinspired artificial adhesion systems. Furthermore, we think that it could possibly represent a useful approach in order to investigate any potential difference in the ecology and in the performance of adhesion by different species.

The morphology and adhesion mechanism of Octopus vulgaris suckers.

Science.gov (United States)

Tramacere, Francesca; Beccai, Lucia; Kuba, Michael; Gozzi, Alessandro; Bifone, Angelo; Mazzolai, Barbara

2013-01-01

The octopus sucker represents a fascinating natural system performing adhesion on different terrains and substrates. Octopuses use suckers to anchor the body to the substrate or to grasp, investigate and manipulate objects, just to mention a few of their functions. Our study focuses on the morphology and adhesion mechanism of suckers in Octopus vulgaris. We use three different techniques (MRI, ultrasonography, and histology) and a 3D reconstruction approach to contribute knowledge on both morphology and functionality of the sucker structure in O. vulgaris. The results of our investigation are two-fold. First, we observe some morphological differences with respect to the octopus species previously studied (i.e., Octopus joubini, Octopus maya, Octopus bimaculoides/bimaculatus and Eledone cirrosa). In particular, in O. vulgaris the acetabular chamber, that is a hollow spherical cavity in other octopuses, shows an ellipsoidal cavity which roof has an important protuberance with surface roughness. Second, based on our findings, we propose a hypothesis on the sucker adhesion mechanism in O. vulgaris. We hypothesize that the process of continuous adhesion is achieved by sealing the orifice between acetabulum and infundibulum portions via the acetabular protuberance. We suggest this to take place while the infundibular part achieves a completely flat shape; and, by sustaining adhesion through preservation of sucker configuration. In vivo ultrasonographic recordings support our proposed adhesion model by showing the sucker in action. Such an underlying physical mechanism offers innovative potential cues for developing bioinspired artificial adhesion systems. Furthermore, we think that it could possibly represent a useful approach in order to investigate any potential difference in the ecology and in the performance of adhesion by different species.

Abrasive wear mechanisms and surface layer structure of refractory materials after mechanical working

International Nuclear Information System (INIS)

Milman, Y.V.; Lotsko, D.V.

1989-01-01

The mechanisms of abrasive wear and surface layer structure formation after different kinds of mechanical working are considered in terms of fracture and plastic deformation mechanisms for various refractory materials. The principles for classification of abrasive wear mechanisms are proposed, the four types of wear mechanisms are distinguished for various combinations of fractures and plastic deformation types. The concept of characteristic deformation temperature t * (knee temperature) is used. Detailed examples are given of investigating the surface layer structures in grinded crystals of sapphire and molybdenum. The amorphisation tendency of the thinnest surface layer while mechanical polishing is discussed separately. 19 refs., 11 figs., 2 tabs. (Author)

Optimization evaluation of cutting technology based on mechanical parts

Science.gov (United States)

Wang, Yu

2018-04-01

The relationship between the mechanical manufacturing process and the carbon emission is studied on the basis of the process of the mechanical manufacturing process. The formula of carbon emission calculation suitable for mechanical manufacturing process is derived. Based on this, a green evaluation method for cold machining process of mechanical parts is proposed. The application verification and data analysis of the proposed evaluation method are carried out by an example. The results show that there is a great relationship between the mechanical manufacturing process data and carbon emissions.

Experimental status of quaternionic quantum mechanics

International Nuclear Information System (INIS)

Brumby, S.P.; Joshi, G.C.

1995-01-01

Analysis of the logical foundations of quantum mechanics indicates the possibility of constructing a theory using quaternionic Hilbert spaces. Whether this mathematical structure reflects reality is a matter for experiment to decide. The only direct search for quaternionic quantum mechanics yet carried out is reviewed and is proposed to look for quaternionic effects in correlated multi-particle systems. It is also discussed how such experiments might distinguish between the several quaternionic models proposed in the literature. 21 refs

Operation analysis of a Chebyshev-Pantograph leg mechanism for a single DOF biped robot

Science.gov (United States)

Liang, Conghui; Ceccarelli, Marco; Takeda, Yukio

2012-12-01

In this paper, operation analysis of a Chebyshev-Pantograph leg mechanism is presented for a single degree of freedom (DOF) biped robot. The proposed leg mechanism is composed of a Chebyshev four-bar linkage and a pantograph mechanism. In contrast to general fully actuated anthropomorphic leg mechanisms, the proposed leg mechanism has peculiar features like compactness, low-cost, and easy-operation. Kinematic equations of the proposed leg mechanism are formulated for a computer oriented simulation. Simulation results show the operation performance of the proposed leg mechanism with suitable characteristics. A parametric study has been carried out to evaluate the operation performance as function of design parameters. A prototype of a single DOF biped robot equipped with two proposed leg mechanisms has been built at LARM (Laboratory of Robotics and Mechatronics). Experimental test shows practical feasible walking ability of the prototype, as well as drawbacks are discussed for the mechanical design.

The development and experimental validation of a reduced ternary kinetic mechanism for the auto-ignition at HCCI conditions, proposing a global reaction path for ternary gasoline surrogates

Energy Technology Data Exchange (ETDEWEB)

Machrafi, Hatim; Cavadias, Simeon; Amouroux, Jacques [UPMC Universite Paris 06, LGPPTS, Ecole Nationale Superieure de Chimie de Paris, 11, rue de Pierre et Marie Curie, 75005 Paris (France)

2009-02-15

To acquire a high amount of information of the behaviour of the Homogeneous Charge Compression Ignition (HCCI) auto-ignition process, a reduced surrogate mechanism has been composed out of reduced n-heptane, iso-octane and toluene mechanisms, containing 62 reactions and 49 species. This mechanism has been validated numerically in a 0D HCCI engine code against more detailed mechanisms (inlet temperature varying from 290 to 500 K, the equivalence ratio from 0.2 to 0.7 and the compression ratio from 8 to 18) and experimentally against experimental shock tube and rapid compression machine data from the literature at pressures between 9 and 55 bar and temperatures between 700 and 1400 K for several fuels: the pure compounds n-heptane, iso-octane and toluene as well as binary and ternary mixtures of these compounds. For this validation, stoichiometric mixtures and mixtures with an equivalence ratio of 0.5 are used. The experimental validation is extended by comparing the surrogate mechanism to experimental data from an HCCI engine. A global reaction pathway is proposed for the auto-ignition of a surrogate gasoline, using the surrogate mechanism, in order to show the interactions that the three compounds can have with one another during the auto-ignition of a ternary mixture. (author)

A set of genes previously implicated in the hypoxia response might be an important modulator in the rat ear tissue response to mechanical stretch

Directory of Open Access Journals (Sweden)

Orgill Dennis

2007-11-01

Full Text Available Abstract Background Wounds are increasingly important in our aging societies. Pathologies such as diabetes predispose patients to chronic wounds that can cause pain, infection, and amputation. The vacuum assisted closure device shows remarkable outcomes in wound healing. Its mechanism of action is unclear despite several hypotheses advanced. We previously hypothesized that micromechanical forces can heal wounds. To understand better the biological response of soft tissue to forces, rat ears in vivo were stretched and their gene expression patterns over time obtained. The absolute enrichment (AE algorithm that obtains a combined up and down regulated picture of the expression analysis was implemented. Results With the use of AE, the hypoxia gene set was the most important at a highly significant level. A co-expression network analysis showed that important co-regulated members of the hypoxia pathway include a glucose transporter (slc2a8, heme oxygenase, and nitric oxide synthase2 among others. Conclusion It appears that the hypoxia pathway may be an important modulator of response of soft tissue to forces. This finding gives us insights not only into the underlying biology, but also into clinical interventions that could be designed to mimic within wounded tissue the effects of forces without all the negative effects that forces themselves create.

Quark mass hierarchies from the universal seesaw mechanism

International Nuclear Information System (INIS)

Davidson, A.; Michel, L.; Sage, M.L.; Wali, K.C.

1994-01-01

The paper is an extension of the previous work based on the idea of a universal seesaw mechanism to explain the hierarchies in the fermion mass spectrum. A model is proposed within the framework of left-right symmetry with a minimal Higgs system and an axial U(1) symmetry imposed to distinguish the generations. Previous work was confined, for mathematical simplifications, to the case of nonsingular mass matrices. In the present paper, singular matrices are considered. A systematic perturbative technique is developed to display the mass eigenvalues in terms of the vacuum expectation values of the assumed Higgs multiplets. The model successfully correlates the mass hierarchies among the quarks to the assumed hierarchies in the vacuum expectation values without appealing to a hierarchy in the Yukawa-type fermion--Higgs-boson couplings. By considering a general Higgs potential appropriate to the model, we study its minimization and prove that there exists an open subdomain in the parameter space where the orbit of the lowest minima of the potential corresponds to the kind of hierarchy in the vacuum expectation values needed for the success of the model

Search for violations of quantum mechanics

International Nuclear Information System (INIS)

Ellis, J.; Hagelin, J.S.; Nanopoulos, D.V.; Srednicki, M.

1984-01-01

The treatment of quantum effects in gravitational fields indicates that pure states may evolve into mixed states, and Hawking has proposed modification of the axioms of field theory which incorporate the corresponding violation of quantum mechanics. In this paper we propose a modified hamiltonian equation of motion for density matrices and use it to interpret upper bounds on the violation of quantum mechanics in different phenomenological situations. We apply our formalism to the K 0 -anti K 0 system and to long baseline neutron interferometry experiments. In both cases we find upper bounds of about 2x10 -21 GeV on contributions to the single particle 'hamiltonian' which violate quantum mechanical coherence. We discuss how these limits might be improved in the future, and consider the relative significance of other successful tests of quantum mechanics. An appendix contains model estimates of the magnitude of effects violating quantum mechanics. (orig.)

Host epithelial cell invasion by Campylobacter jejuni: trigger or zipper mechanism?

Directory of Open Access Journals (Sweden)

Tadhg eÓ Cróinín

2012-03-01

Full Text Available Campylobacter jejuni, a spiral-shaped Gram-negative pathogen, is a highly frequent cause of gastrointestinal foodborne illness in humans worldwide. Clinical outcome of C. jejuni infections ranges from mild to severe diarrheal disease, and some other complications including reactive arthritis and Guillain–Barré syndrome. This review article highlights various C. jejuni pathogenicity factors, host cell determinants and proposed signaling mechanisms involved in human host cell invasion and their potential role in the development of C. jejuni-mediated disease. A model is presented which outlines the various important interactions of C. jejuni with the intestinal epithelium, and we discuss the pro’s and con’s for the zipper over the trigger mechanism of invasion. Future work should clarify the contradictory role of some previously identified factors, and should identify and characterize novel virulence determinants, which are crucial to provide fresh insights into the diversity of strategies employed by this pathogen to cause disease.

Gamification in online education: proposal for a participatory learning model

Directory of Open Access Journals (Sweden)

Fabiana Bigão Silva

2017-09-01

Full Text Available Empirical studies have suggested limitations on the form of application of gamification mechanics in the context of online education. These mechanics have been applied without reference to a theoretical model dedicated to this type of education. The objective of the paper is to propose a model for a gamified platform for online education that contributes to a more participatory learning, taking into account the different student profiles. Based on literature review about approaches to gamification systems design, a set of steps was followed in order to develop a generic model for a framework dedicated to online education. The model proposed is based on the Educational Gamification Design Principles proposed by Dicheva et al. (2015. The model may contribute to the promotion of participatory learning, taking into account the different student profiles. The results of such evaluation will be published in the future.

Hamiltonian mechanics limits microscopic engines

Science.gov (United States)

Anglin, James; Gilz, Lukas; Thesing, Eike

2015-05-01

We propose a definition of fully microscopic engines (micro-engines) in terms of pure mechanics, without reference to thermodynamics, equilibrium, or cycles imposed by external control, and without invoking ergodic theory. This definition is pragmatically based on the observation that what makes engines useful is energy transport across a large ratio of dynamical time scales. We then prove that classical and quantum mechanics set non-trivial limits-of different kinds-on how much of the energy that a micro-engine extracts from its fuel can be converted into work. Our results are not merely formal; they imply manageable design constraints on micro-engines. They also suggest the novel possibility that thermodynamics does not emerge from mechanics in macroscopic regimes, but rather represents the macroscopic limit of a generalized theory, valid on all scales, which governs the important phenomenon of energy transport across large time scale ratios. We propose experimental realizations of the dynamical mechanisms we identify, with trapped ions and in Bose-Einstein condensates (``motorized bright solitons'').

A fully rotational joint underactuated finger mechanism and its kinematics analysis

Directory of Open Access Journals (Sweden)

Wu Licheng

2016-09-01

Full Text Available The characteristic features of underactuated finger are compact structure, large grasping force, and simple operation. It has a wide application prospect in the fields of industrial robot, humanoid robot, human artificial limb, and space robot. A new type of fully rotating joint linkage-based underactuated mechanism is proposed, and a new method based on the law of minimum resistance is presented to realize the equivalent mechanism at different contact conditions of the finger and the kinematical analysis based on the equivalent mechanism. The kinematic equations and the limit moving position of the mechanism are derived using the proposed method. Finally, the numerical simulation is carried out by MATLAB program. The correctness and effectiveness of the proposed method are verified. The simulation results show that the proposed mechanism has a large grasp space and can achieve good grasp trajectory.

49 CFR 173.23 - Previously authorized packaging.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Previously authorized packaging. 173.23 Section... REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Preparation of Hazardous Materials for Transportation § 173.23 Previously authorized packaging. (a) When the regulations specify a packaging with a specification marking...

Understanding the mechanism of base development of HSQ

Energy Technology Data Exchange (ETDEWEB)

Kim, Jihoon; Chao, Weilun; Griedel, Brian; Liang, Xiaogan; Lewis, Mark; Hilken, Dawn; Olynick, Deirdre

2009-06-16

We study the dissolution mechanism of HSQ (hydrogen silsesquioxane) in base solutions with the addition of chloride salts to elucidate the development mechanism. Reaction mechanisms are proposed based on the dissolution mechanism of quartz. Development kinetics points to two dose-dependent development mechanisms. Considering ion sizes, both hydrated and non-hydrated, and ion exchange, we propose that a combination of a surface dominated reaction at higher doses and a matrix dominated reaction at lower doses accounts for the high development contrast with a NaOH base/NaCl salt mixture. The interplay between the hydrated and non-hydrated ion size leads to higher contrast developers, such as tetramethyl ammonium hydroxide (TMAH) with NaCl.

Insights into the Thiamine Diphosphate Enzyme Activation Mechanism: Computational Model for Transketolase Using a Quantum Mechanical/Molecular Mechanical Method.

Science.gov (United States)

Nauton, Lionel; Hélaine, Virgil; Théry, Vincent; Hecquet, Laurence

2016-04-12

We propose the first computational model for transketolase (TK), a thiamine diphosphate (ThDP)-dependent enzyme, using a quantum mechanical/molecular mechanical method on the basis of crystallographic TK structures from yeast and Escherichia coli, together with experimental kinetic data reported in the literature with wild-type and mutant TK. This model allowed us to define a new route for ThDP activation in the enzyme environment. We evidenced a strong interaction between ThDP and Glu418B of the TK active site, itself stabilized by Glu162A. The crucial point highlighted here is that deprotonation of ThDP C2 is not performed by ThDP N4' as reported in the literature, but by His481B, involving a HOH688A molecule bridge. Thus, ThDP N4' is converted from an amino form to an iminium form, ensuring the stabilization of the C2 carbanion or carbene. Finally, ThDP activation proceeds via an intermolecular process and not by an intramolecular one as reported in the literature. More generally, this proposed ThDP activation mechanism can be applied to some other ThDP-dependent enzymes and used to define the entire TK mechanism with donor and acceptor substrates more accurately.

Topology synthesis of large-displacement compliant mechanisms

DEFF Research Database (Denmark)

Pedersen, Claus B. Wittendorf; Buhl, Thomas; Sigmund, Ole

2001-01-01

This paper describes the use of topology optimization as a synthesis tool for the design of large-displacement compliant mechanisms. An objective function for the synthesis of large-displacement mechanisms is proposed together with a formulation for synthesis of path-generating compliant mechanisms...

22 CFR 40.91 - Certain aliens previously removed.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Certain aliens previously removed. 40.91... IMMIGRANTS UNDER THE IMMIGRATION AND NATIONALITY ACT, AS AMENDED Aliens Previously Removed § 40.91 Certain aliens previously removed. (a) 5-year bar. An alien who has been found inadmissible, whether as a result...

Working group inciting mechanisms

International Nuclear Information System (INIS)

Bureau, D.

2001-01-01

This document deals with the inciting mechanisms under consideration in the framework of the greenhouse effect fight. The advantages and disadvantages, the coherence of these mechanisms and their articulation with the taxation, have been specified. A whole evaluation of the various scenario, taking into account the implementing problems and the evolution in an international context, is proposed. (A.L.B.)

Statistical algebraic approach to quantum mechanics

International Nuclear Information System (INIS)

Slavnov, D.A.

2001-01-01

The scheme for plotting the quantum theory with application of the statistical algebraic approach is proposed. The noncommutative algebra elements (observed ones) and nonlinear functionals on this algebra (physical state) are used as the primary constituents. The latter ones are associated with the single-unit measurement results. Certain physical state groups are proposed to consider as quantum states of the standard quantum mechanics. It is shown that the mathematical apparatus of the standard quantum mechanics may be reproduced in such a scheme in full volume [ru

Filtering for distributed mechanical systems using position measurements: perspectives in medical imaging

International Nuclear Information System (INIS)

Moireau, Philippe; Chapelle, Dominique; Tallec, Patrick Le

2009-01-01

We propose an effective filtering methodology designed to perform estimation in a distributed mechanical system using position measurements. As in a previously introduced method, the filter is inspired by robust control feedback, but here we take full advantage of the estimation specificity to choose a feedback law that can act on displacements instead of velocities and still retain the same kind of dissipativity property which guarantees robustness. This is very valuable in many applications for which positions are more readily available than velocities, as in medical imaging. We provide an in-depth analysis of the proposed procedure, as well as detailed numerical assessments using a test problem inspired by cardiac biomechanics, as medical diagnosis assistance is an important perspective for this approach. The method is formulated first for measurements based on Lagrangian displacements, but we then derive a nonlinear extension allowing us to instead consider segmented images, which of course is even more relevant in medical applications

Conceptual foundations of quantum mechanics

International Nuclear Information System (INIS)

Shimony, A.

1989-01-01

Radical innovation in the quantum mechanical framework such as objective indefiniteness, objective chance, objective probability, potentiality, entanglement and quantum nonlocality are discussed and related to the standard formalism. Examples are given which though problematic in classical mechanics are simply explained with these new concepts. Evidence is presented that the conceptual innovations of quantum mechanics cannot be separated from its predictive power. Proposals for solving ''the reduction of the wave packet'' anomaly are presented. Further radical innovations in quantum mechanics are anticipated. (U.K.)

A new and efficient mechanism for spark ignition engines

International Nuclear Information System (INIS)

Shadloo, M.S.; Poultangari, R.; Abdollahzadeh Jamalabadi, M.Y.; Rashidi, M.M.

2015-01-01

Highlights: • A new slider–crank mechanism, with superior performance is presented. • Thermodynamic processes as well as vibration and internal forces have been modeled. • Comparison with the conventional four-stroke spark ignition engines is made. • Advantages and disadvantages of the proposed mechanism are discussed. - Abstract: In this paper a new symmetrical crank and slider mechanism is proposed and a zero dimensional model is utilized to study its combustion performance enhancement in a four-stroke spark ignition (SI) engine. The main features of this new mechanism are superior thermodynamic efficiency, lower internal frictions, and lower pollutants. Comparison is made between its performance and that of the conventional four-stroke SI engines. Presented mechanism is designed to provide better fuel consumption of internal combustion engines. These advantages over standard engine are achieved through synthesis of new mechanism. Numerical calculation have been performed for several cases of different mechanism parameters, compression ratio and engine speed. A comprehensive comparison between their thermodynamic processes as well as vibration and internal forces has been done. Calculated efficiency and power diagrams are plotted and compared with performance of a conventional SI engine. Advantages and disadvantages of the proposed mechanism are discussed in details

Mechanisms and coherences of robust design methodology: a robust design process proposal

DEFF Research Database (Denmark)

Göhler, Simon Moritz; Christensen, Martin Ebro; Howard, Thomas J.

2016-01-01

Although robust design (RD) methods are recognised as a way of developing mechanical products with consistent and predictable performance and quality, they do not experience widespread success in industry. One reason being the lack of a coherent RD process (RDP). In this contribution we analyse...

Security Analysis of Yeh-Tsai Security Mechanism

Science.gov (United States)

Yum, Dae Hyun; Shin, Jong Hoon; Lee, Pil Joong

Yeh and Tsai recently proposed an enhanced mobile commerce security mechanism. They modified the lightweight security mechanism due to Lam, Chung, Gu, and Sun to relieve the burden of mobile clients. However, this article shows that a malicious WAP gateway can successfully obtain the mobile client's PIN by sending a fake public key of a mobile commerce server and exploiting information leakage caused by addition operation. We also present a countermeasure against the proposed attack.

Study on a mechanical snubber with an adjustment mechanism for resisting force

International Nuclear Information System (INIS)

Ohmata, Kenichiro; Miyanaga, Hiroyuki.

1991-01-01

The mechanical snubber is an earthquakeproof device for a piping system under particular circumstances such as high temperature and radioactivity. It restrains the piping system by a strong resisting force during an earthquake. This strong force can cause elastic failure of grooves on a brake disk, where steel balls are placed. In this report, an improved mechanical snubber having an adjustment mechanism for resisting force is proposed in order to obtain a mechanical snubber which has almost the same restraint effect and less resisting force in comparison with a conventional mechanical snubber. The resisting force characteristics and the restraint effect of the improved mechanical snubber applied to a simple beam are discussed both numerically and experimentally. The digital simulations are carried out using the Continuous System Simulation Language (CSSL). (author)

Design process of the nanofluid injection mechanism in nuclear power plants

Directory of Open Access Journals (Sweden)

Bang In Choel

2011-01-01

Full Text Available Abstract Nanofluids, which are engineered suspensions of nanoparticles in a solvent such as water, have been found to show enhanced coolant properties such as higher critical heat flux and surface wettability at modest concentrations, which is a useful characteristic in nuclear power plants (NPPs. This study attempted to provide an example of engineering applications in NPPs using nanofluid technology. From these motivations, the conceptual designs of the emergency core cooling systems (ECCSs assisted by nanofluid injection mechanism were proposed after following a design framework to develop complex engineering systems. We focused on the analysis of functional requirements for integrating the conventional ECCSs and nanofluid injection mechanism without loss of performance and reliability. Three candidates of nanofluid-engineered ECCS proposed in previous researches were investigated by applying axiomatic design (AD in the manner of reverse engineering and it enabled to identify the compatibility of functional requirements and potential design vulnerabilities. The methods to enhance such vulnerabilities were referred from TRIZ and concretized for the ECCS of the Korean nuclear power plant. The results show a method to decouple the ECCS designs with the installation of a separate nanofluids injection tank adjacent to the safety injection tanks such that a low pH environment for nanofluids can be maintained at atmospheric pressure which is favorable for their injection in passive manner.

New insights into the binding and catalytic mechanisms of Bacillus thuringiensis lactonase: insights into B. thuringiensis AiiA mechanism.

Directory of Open Access Journals (Sweden)

Marc N Charendoff

Full Text Available The lactonase enzyme (AiiA produced by Bacillus thuringiensis serves to degrade autoinducer-1 (AI-1 signaling molecules in what is an evolved mechanism by which to compete with other bacteria. Bioassays have been previously performed to determine whether the AI-1 aliphatic tail lengths have any effect on AiiA's bioactivity, however, data to date are conflicting. Additionally, specific residue contributions to the catalytic activity of AiiA provide for some interesting questions. For example, it has been proposed that Y194 serves to provide an oxyanion hole to AI-1 which is curious given the fact the substrate spans two Zn(2+ ions. These ions might conceivably provide enough charge to promote both ligand stability and the carbonyl activation necessary to drive a nucleophilic attack. To investigate these questions, multiple molecular dynamics simulations were performed across a family of seven acylated homoserine lactones (AHL along with their associated intermediate and product states. Distance analyses and interaction energy analyses were performed to investigate current bioassay data. Our simulations are consistent with experimental studies showing that AiiA degrades AHLs in a tail length independent manner. However, the presence of the tail is required for activity. Also, the putative oxyanion hole function of Y194 toward the substrate is not observed in any of the reactant or product state simulation trajectories, but does seem to show efficacy in stabilizing the intermediate state. Last, we argue through ionization state analyses, that the proton shuttling necessary for catalytic activity might be mediated by both water and substrate-based intra-molecular proton transfer. Based on this argument, an alternate catalytic mechanism is proposed.

Assessment of proposed electromagnetic quantum vacuum energy extraction methods

OpenAIRE

Moddel, Garret

2009-01-01

In research articles and patents several methods have been proposed for the extraction of zero-point energy from the vacuum. None has been reliably demonstrated, but the proposals remain largely unchallenged. In this paper the feasibility of these methods is assessed in terms of underlying thermodynamics principles of equilibrium, detailed balance, and conservation laws. The methods are separated into three classes: nonlinear processing of the zero-point field, mechanical extraction using Cas...

Classification of the ejection mechanisms of charged macromolecules from liquid droplets.

Science.gov (United States)

Consta, Styliani; Malevanets, Anatoly

2013-01-28

The relation between the charge state of a macromolecule and its ejection mechanism from droplets is one of the important questions in electrospray ionization methods. In this article, effects of solvent-solute interaction on the manifestation of the charge induced instability in a droplet are examined. We studied the instabilities in a prototype system of a droplet comprised of charged poly(ethylene glycol) and methanol, acetonitrile, and water solvents. We observed instances of three, previously only conjectured, [S. Consta, J. Phys. Chem. B 114, 5263 (2010)] mechanisms of macroion ejection. The mechanism of ejection of charged macroion in methanol is reminiscent of "pearl" model in polymer physics. In acetonitrile droplets, the instability manifests through formation of solvent spines around the solvated macroion. In water, we find that the macroion is ejected from the droplet through contiguous extrusion of a part of the chain. The difference in the morphology of the instabilities is attributed to the interplay between forces arising from the macroion solvation energy and the surface energy of the droplet interface. For the contiguous extrusion of a charged macromolecule from a droplet, we demonstrate that the proposed mechanism leads to ejection of the macromolecule from droplets with sizes well below the Rayleigh limit. The ejected macromolecule may hold charge significantly higher than that suggested by prevailing theories. The simulations reveal new mechanisms of macroion evaporation that differ from conventional charge residue model and ion evaporation mechanisms.

Genomic interrogation of mechanism(s) underlying cellular responses to toxicants

International Nuclear Information System (INIS)

Amin, Rupesh P.; Hamadeh, Hisham K.; Bushel, Pierre R.; Bennett, Lee; Afshari, Cynthia A.; Paules, Richard S.

2002-01-01

Assessment of the impact of xenobiotic exposure on human health and disease progression is complex. Knowledge of mode(s) of action, including mechanism(s) contributing to toxicity and disease progression, is valuable for evaluating compounds. Toxicogenomics, the subdiscipline which merges genomics with toxicology, holds the promise to contributing significantly toward the goal of elucidating mechanism(s) by studying genome-wide effects of xenobiotics. Global gene expression profiling, revolutionized by microarray technology and a crucial aspect of a toxicogenomic study, allows measuring transcriptional modulation of thousands of genes following exposure to a xenobiotic. We use our results from previous studies on compounds representing two different classes of xenobiotics (barbiturate and peroxisome proliferator) to discuss the application of computational approaches for analyzing microarray data to elucidate mechanism(s) underlying cellular responses to toxicants. In particular, our laboratory demonstrated that chemical-specific patterns of gene expression can be revealed using cDNA microarrays. Transcript profiling provides discrimination between classes of toxicants, as well as, genome-wide insight into mechanism(s) of toxicity and disease progression. Ultimately, the expectation is that novel approaches for predicting xenobiotic toxicity in humans will emerge from such information

A pneumatic cylinder driving polyhedron mobile mechanism

Science.gov (United States)

Ding, Wan; Kim, Sung-Chan; Yao, Yan-An

2012-03-01

A novel pneumatic cylinder driving polyhedron mobile mechanism is proposed in this paper. The mechanism is comprised of 5 tetrahedrons which includes a pneumatic cylinder in each edge. It locomotes by rolling and the rolling principle refers to the center of mass (CM) of the mechanism moved out of the supporting area and let it tip over through the controlling of the motion sequence of these cylinders. Firstly, the mathematical model is built to analysis the relation between the configuration and the CM of the mechanism. Then, a binary control strategy is developed to simplify and improve the control of this mobile mechanism. After that, dynamic simulation is performed to testify the analytical validity and feasibility of the rolling gaits. At last, a prototype is fabricated to achieve the rolling successfully to demonstrate the proposed concept.

A Proposed Mechanism for Development of CTE Following Concussive Events: Head Impact, Water Hammer Injury, Neurofilament Release, and Autoimmune Processes.

Science.gov (United States)

Kornguth, Steven; Rutledge, Neal; Perlaza, Gabe; Bray, James; Hardin, Allen

2017-12-19

During the past decade, there has been an increasing interest in early diagnosis and treatment of traumatic brain injuries (TBI) that lead to chronic traumatic encephalopathy (CTE). The subjects involved range from soldiers exposed to concussive injuries from improvised explosive devices (IEDs) to a significant number of athletes involved in repetitive high force impacts. Although the forces from IEDs are much greater by a magnitude than those from contact sports, the higher frequency associated with contact sports allows for more controlled assessment of the mechanism of action. In our study, we report findings in university-level women soccer athletes followed over a period of four and a half years from accession to graduation. Parameters investigated included T1-, T2-, and susceptibility-weighted magnetic resonance images (SWI), IMPACT (Immediate Post-Concussion Assessment and Cognitive Testing), and C3 Logix behavioral and physiological assessment measures. The MRI Studies show several significant findings: first, a marked increase in the width of sulci in the frontal to occipital cortices; second, an appearance of subtle hemorrhagic changes at the base of the sulci; third was a sustained reduction in total brain volume in several soccer players at a developmental time when brain growth is generally seen. Although all of the athletes successfully completed their college degree and none exhibited long term clinical deficits at the time of graduation, the changes documented by MRI represent a clue to the pathological mechanism following an injury paradigm. The authors propose that our findings and those of prior publications support a mechanism of injury in CTE caused by an autoimmune process associated with the release of neural proteins from nerve cells at the base of the sulcus from a water hammer injury effect. As evidence accumulates to support this hypothesis, there are pharmacological treatment strategies that may be able to mitigate the development of

Thermo-mechanical constitutive modeling of unsaturated clays based on the critical state concepts

Directory of Open Access Journals (Sweden)

Saeed Tourchi

2015-04-01

Full Text Available A thermo-mechanical constitutive model for unsaturated clays is constructed based on the existing model for saturated clays originally proposed by the authors. The saturated clays model was formulated in the framework of critical state soil mechanics and modified Cam-clay model. The existing model has been generalized to simulate the experimentally observed behavior of unsaturated clays by introducing Bishop's stress and suction as independent stress parameters and modifying the hardening rule and yield criterion to take into account the role of suction. Also, according to previous studies, an increase in temperature causes a reduction in specific volume. A reduction in suction (wetting for a given confining stress may induce an irreversible volumetric compression (collapse. Thus an increase in suction (drying raises a specific volume i.e. the movement of normal consolidation line (NCL to higher values of void ratio. However, some experimental data confirm the assumption that this reduction is dependent on the stress level of soil element. A generalized approach considering the effect of stress level on the magnitude of clays thermal dependency in compression plane is proposed in this study. The number of modeling parameters is kept to a minimum, and they all have clear physical interpretations, to facilitate the usefulness of model for practical applications. A step-by-step procedure used for parameter calibration is also described. The model is finally evaluated using a comprehensive set of experimental data for the thermo-mechanical behavior of unsaturated soils.

Proposed mechanism of thermoluminescence induced by UV light in the natural CaF2

International Nuclear Information System (INIS)

Las, W.C.

1976-01-01

The TL response of blue fluorite samples was measured as a function of exposure to 250 nm and 365 nm light. The TL response is linear in the low intensity region, becomes sublinear and has a maximum, decreasing afterwards for higher exposure intensities.The filled deep trap concentration, corresponding to the residual peak, was varied by annealing at different temperatures. The TL response maximum is proportional to this concentration. By exposing the sample to different light intensities a simultaneous decrease of the residual peak and increase of the lower temperature peaks was observed. This behavior suggests a charge transfer process from deep traps to shallow ones. A mathematical model based on this mechanism was proposed by Okuno and Watanabe in order to explain the experimental results. Besides the TL response curves, further data were obtained throughout a cycle of successive exposures to UV light. This experiment showed that the TL peak height presents two distinct decays as a function of the number of successive exposures. The decay is proportional to the probability of releasing charge from deep traps. The model above, however, didn't explain the experimental results. Two modifications were made: one, taking into account the retrapping probability, and the other considering the residual peak as composed of two peaks. From this latter assumption, it was possible to fit simultaneously the TL response curves and the residual peak decays, for 250 nm and 365 nm. The successive exposure curves, however, couldn't be explained in this way. The continuous decrease of the probability of charge release from deep traps as a function of the UV light intensity suggested a continuous distribution of energy levels for the residual peak. This last model fitted all 250 nm experimental data, and the glow curves of the residual peak [pt

Understanding the unbundled utility conservation bidding proposal

International Nuclear Information System (INIS)

Joskow, P.L.

1990-01-01

For several years regulatory advisers have been engaged in controversy about the propriety of integrating energy conservation measures into the total resource planning processes of electric utilities, and of proposed methods of doing so in the competitive supply procurement programs which have been initiated by some utilities. Two prominent economists conceived a method for doing this in competitive bidding programs and at the same time overcoming objections to previous proposals which were based on perceived violations of basic economic principles. They explained their concept and its operation in an article published here in June of last year. In this article another economist subjects the concept to further analysis, identifying its essential elements, and point to inevitable results of their application

A modelling of the mechanisms occurring during the atmospheric corrosion of iron

International Nuclear Information System (INIS)

Marechal, L.; Perrin, S.; Hoerle, S.; Mazaudier, F.; Dillmann, P.

2004-01-01

In order to predict the long-term corrosion of metallic containers in storage conditions, a modelling of atmospheric corrosion of iron is proposed. This modelling takes into account the mechanisms which occur during the three stages of a wet-dry cycle. During the wetting stage, the reduction of lepidocrocite (g-FeOOH), a constituent of the rust layer, is considered to be the rate-limiting step of the corrosion. During the second stage of the cycle, the wet period, the reduction of dissolved oxygen on the lepidocrocite, previously reduced, is controlling the mechanism. The amount of oxidized metal depends on the quantity of reduced lepidocrocite and also on the oxygen diffusion in the electrolyte and the rust layer. At the end of the cycle, the blocking of the anodic sites is considered to describe the extinction of electrochemical corrosion during the drying. It appears that each stage of the cycle depends mainly on the chemical and morphological properties of the rust layer. (authors)

A New Proposal for the Pathogenic Mechanism of Non-Coeliac/Non-Allergic Gluten/Wheat Sensitivity: Piecing Together the Puzzle of Recent Scientific Evidence

Directory of Open Access Journals (Sweden)

Valentina Leccioli

2017-11-01

Full Text Available Non-coeliac/non-allergic gluten/wheat sensitivity (NCG/WS is a gluten-related disorder, the pathogenesis of which remains unclear. Recently, the involvement of an increased intestinal permeability has been recognized in the onset of this clinical condition. However, mechanisms through which it takes place are still unclear. In this review, we attempt to uncover these mechanisms by providing, for the first time, an integrated vision of recent scientific literature, resulting in a new hypothesis about the pathogenic mechanisms involved in NCG/WS. According to this, the root cause of NCG/WS is a particular dysbiotic profile characterized by decreased butyrate-producing-Firmicutes and/or Bifidobacteria, leading to low levels of intestinal butyrate. Beyond a critical threshold of the latter, a chain reaction of events and vicious circles occurs, involving other protagonists such as microbial lipopolysaccharide (LPS, intestinal alkaline phosphatase (IAP and wheat α-amylase trypsin inhibitors (ATIs. NCG/WS is likely to be a multi-factor-onset disorder, probably transient and preventable, related to quality and balance of the diet, and not to the presence of gluten in itself. If future studies confirm our proposal, this would have important implications both for the definition of the disease, as well as for the prevention and therapeutic-nutritional management of individuals with NCG/WS.

Proposal of Ex-Vessel dosimetry for pressure vessel Atucha II

International Nuclear Information System (INIS)

Chiaraviglio, N.; Bazzana, S.

2013-01-01

Nuclear reactor dosimetry has the purpose of guarantee that changes in material mechanical properties of critical materials do not compromise the reactor safety. In PWR in which the top of the reactor vessel is open once a year, is possible to use Charpy specimens to measure the change in mechanical properties. Atucha II nuclear power plant is a reactor with on-line refueling so there is no access to the inside of the pressure vessel. Because of this, ex-vessel dosimetry must be performed and mechanical properties changes must be inferred from radiation damage estimations. This damage can be calculated using displacement per atom cross sections and a transport code such as MCNP. To increase results reliability it is proposed to make a neutron spectrum unfolding using activation dosimeters irradiated during one operation cycle of the power plant. In this work we present a dosimetry proposal for such end, made in base of unfolding procedures and experimental background. (author) [es

Adobe Boxes: Locating Object Proposals Using Object Adobes.

Science.gov (United States)

Fang, Zhiwen; Cao, Zhiguo; Xiao, Yang; Zhu, Lei; Yuan, Junsong

2016-09-01

Despite the previous efforts of object proposals, the detection rates of the existing approaches are still not satisfactory enough. To address this, we propose Adobe Boxes to efficiently locate the potential objects with fewer proposals, in terms of searching the object adobes that are the salient object parts easy to be perceived. Because of the visual difference between the object and its surroundings, an object adobe obtained from the local region has a high probability to be a part of an object, which is capable of depicting the locative information of the proto-object. Our approach comprises of three main procedures. First, the coarse object proposals are acquired by employing randomly sampled windows. Then, based on local-contrast analysis, the object adobes are identified within the enlarged bounding boxes that correspond to the coarse proposals. The final object proposals are obtained by converging the bounding boxes to tightly surround the object adobes. Meanwhile, our object adobes can also refine the detection rate of most state-of-the-art methods as a refinement approach. The extensive experiments on four challenging datasets (PASCAL VOC2007, VOC2010, VOC2012, and ILSVRC2014) demonstrate that the detection rate of our approach generally outperforms the state-of-the-art methods, especially with relatively small number of proposals. The average time consumed on one image is about 48 ms, which nearly meets the real-time requirement.

77 FR 43126 - Proposed Extension of Existing Collection; Comment Request

Science.gov (United States)

2012-07-23

..., reporting burden (time and financial resources) is minimized, collection instruments are clearly understood... used to furnish detailed reports to providers on the status of previously submitted bills. Type of...: Provider Enrollment Form (OWCP-1168). A copy of the proposed information collection request can be obtained...

Acceleration control system for semi-active in-car crib with joint application of regular and inverted pendulum mechanisms

International Nuclear Information System (INIS)

Kawashima, T

2016-01-01

To reduce the risk of injury to an infant in an in-car crib (or in a child safety bed) collision shock during a car crash, it is necessary to maintain a constant force acting on the crib below a certain allowable value. To realize this objective, we propose a semi-active in-car crib system with the joint application of regular and inverted pendulum mechanisms. The arms of the proposed crib system support the crib like a pendulum while the pendulum system itself is supported like an inverted pendulum by the arms. In addition, the friction torque of each arm is controlled using a brake mechanism that enables the proposed in-car crib to decrease the acceleration of the crib gradually and maintain it around the target value. This system not only reduces the impulsive force but also transfers the force to the infant's back using a spin control system, i.e., the impulse force acts is made to act perpendicularly on the crib. The spin control system was developed in our previous work. This work focuses on the acceleration control system. A semi-active control law with acceleration feedback is introduced, and the effectiveness of the system is demonstrated using numerical simulation and model experiment. (paper)

Acceleration control system for semi-active in-car crib with joint application of regular and inverted pendulum mechanisms

Science.gov (United States)

Kawashima, T.

2016-09-01

To reduce the risk of injury to an infant in an in-car crib (or in a child safety bed) collision shock during a car crash, it is necessary to maintain a constant force acting on the crib below a certain allowable value. To realize this objective, we propose a semi-active in-car crib system with the joint application of regular and inverted pendulum mechanisms. The arms of the proposed crib system support the crib like a pendulum while the pendulum system itself is supported like an inverted pendulum by the arms. In addition, the friction torque of each arm is controlled using a brake mechanism that enables the proposed in-car crib to decrease the acceleration of the crib gradually and maintain it around the target value. This system not only reduces the impulsive force but also transfers the force to the infant's back using a spin control system, i.e., the impulse force acts is made to act perpendicularly on the crib. The spin control system was developed in our previous work. This work focuses on the acceleration control system. A semi-active control law with acceleration feedback is introduced, and the effectiveness of the system is demonstrated using numerical simulation and model experiment.

Homicide and domestic violence. Are there different psychological profiles mediated by previous exerted on the victim?

Directory of Open Access Journals (Sweden)

Montserrat Yepes

2009-07-01

Full Text Available A sample of 46 men was evaluated with the DAPP (Questionnaire of Domestic Aggressor Psychological Profile. All were inmates convicted for various degrees of violence against their wives in different prisons. The sample was divided into three groups: homicides without previous violence against their wives (H (n=11, homicides with previous violence (VH (n=9 and domestic batterers without previous homicide attempts against their partners (B (n=26. The aim of the study was to analyze the possible existence of three different kinds of profiles and more specifically if it’s possible to obtain an independent profile for domestic homicides with previous episodes of violence against their wives. The results neither confirm the hypothesis as whole nor for the violent homicides. However, differences between groups were obtained in the admission and description of the facts, in the risk of future violence, in some sociodemographical characteristics (i.e., level of education, social status, in the couple relationship, in the dissatisfaction concerning the unachieved ideal woman, in the use of extreme physical force during the aggression, the time of the first aggression, the use of verbal threats during the aggression, explanation of the events to the family and the period of time between the beginning of the romantic relationship and the manifestation of violence. The implications of the results for the theoretical frameworks proposed and future research are discussed.

Effect of gradual ordering of Ge/Sb atoms on chemical bonding: A proposed mechanism for the formation of crystalline Ge2Sb2Te5

Science.gov (United States)

Singh, Janpreet; Singh, Gurinder; Kaura, Aman; Tripathi, S. K.

2018-04-01

Using first principle calculations, we study the atomic arrangement and bonding mechanism in the crystalline phase of Ge2Sb2Te5 (GST). It is found that the stability of GST depends on the gradual ordering of Ge/Sb atoms. The configurations with different concentration of Ge/Sb in layers have been analyzed by the partial density of state, electron localization function and Bader charge distribution. The s and p-states of Ge atom alter with different stacking configurations but there is no change in Sb and Te atom states. Our findings show that the bonding between Ge-Te is not only responsible for the stability of GST alloy but can also predict which composition can show generic features of phase change material. As the number of Ge atoms near to vacancy layer decreases, Ge donates more charge. A growth model has been proposed for the formation of crystalline phase which justifies the structure models proposed in the literature.

Interference coupling mechanisms in Silicon Strip Detectors - CMS tracker "wings" A learned lesson for SLHC

CERN Document Server

Arteche, F; Rivetta, C

2009-01-01

The identification of coupling mechanisms between noise sources and sensitive areas of the front-end electronics (FEE) in the previous CMS tracker sub-system is critical to optimize the design and integration of integrated circuits, sensors and power distribution circuitry for the proposed SLHC Silicon Strip Tracker systems. This paper presents a validated model of the noise sensitivity observed in the Silicon Strip Detector-FEE of the CMS tracker that allows quantifying both the impact of the noise coupling mechanisms and the system immunity against electromagnetic interferences. This model has been validated based on simulations using finite element models and immunity tests conducted on prototypes of the Silicon Tracker End-Caps (TEC) and Outer Barrel (TOB) systems. The results of these studies show important recommendations and criteria to be applied in the design of future detectors to increase the immunity against electromagnetic noise.

INVESTIGATION OF HOLOCENE FAULTING PROPOSED C-746-U LANDFILL EXPANSION

Energy Technology Data Exchange (ETDEWEB)

Lettis, William [William Lettis & Associates, Inc.

2006-07-01

This report presents the findings of a fault hazard investigation for the C-746-U landfill's proposed expansion located at the Department of Energy's (DOE) Paducah Gaseous Diffusion Plant (PGDP), in Paducah, Kentucky. The planned expansion is located directly north of the present-day C-746-U landfill. Previous geophysical studies within the PGDP site vicinity interpret possible northeast-striking faults beneath the proposed landfill expansion, although prior to this investigation the existence, locations, and ages of these inferred faults have not been confirmed through independent subsurface exploration. The purpose of this investigation is to assess whether or not Holocene-active fault displacement is present beneath the footprint of the proposed landfill expansion.

Survival rate of Plodia interpunctella (Lepidoptera: Pyralidae: On different states of wheat and rye kernels previously infested by beetle pests

Directory of Open Access Journals (Sweden)

Vukajlović Filip N.

2017-01-01

Full Text Available The present study was undertaken to determine survival rate of Plodia interpunctella (Hübner, 1813, reared on different mechanical states of Vizija winter wheat cultivar and Raša winter rye cultivar, previously infested with different beetle pests. Wheat was previously infested with Rhyzopertha dominica, Sitophilus granarius, Oryzaephilus surinamensis and Cryptolestes ferrugineus, while rye was infested only with O. surinamensis. Kernels were tested in three different mechanical states: (A whole undamaged kernels; (B kernels already damaged by pests and (C original storage kernels (mixture of B and C type. No P. interpunctella adult emerged on wheat kernels, while 36 adults developed on rye kernels. The highest abundance reached beetle species who fed with a mixture of kernels damaged by pests and whole undamaged kernels. Development and survival rate of five different storage insect pests depends on type of kernels and there exist significant survivorship correlations among them.

Cross-Layer Service Discovery Mechanism for OLSRv2 Mobile Ad Hoc Networks

Directory of Open Access Journals (Sweden)

M. Isabel Vara

2015-07-01

Full Text Available Service discovery plays an important role in mobile ad hoc networks (MANETs. The lack of central infrastructure, limited resources and high mobility make service discovery a challenging issue for this kind of network. This article proposes a new service discovery mechanism for discovering and advertising services integrated into the Optimized Link State Routing Protocol Version 2 (OLSRv2. In previous studies, we demonstrated the validity of a similar service discovery mechanism integrated into the previous version of OLSR (OLSRv1. In order to advertise services, we have added a new type-length-value structure (TLV to the OLSRv2 protocol, called service discovery message (SDM, according to the Generalized MANET Packet/Message Format defined in Request For Comments (RFC 5444. Each node in the ad hoc network only advertises its own services. The advertisement frequency is a user-configurable parameter, so that it can be modified depending on the user requirements. Each node maintains two service tables, one to store information about its own services and another one to store information about the services it discovers in the network. We present simulation results, that compare our service discovery integrated into OLSRv2 with the one defined for OLSRv1 and with the integration of service discovery in Ad hoc On-demand Distance Vector (AODV protocol, in terms of service discovery ratio, service latency and network overhead.

Cross-Layer Service Discovery Mechanism for OLSRv2 Mobile Ad Hoc Networks.

Science.gov (United States)

Vara, M Isabel; Campo, Celeste

2015-07-20

Service discovery plays an important role in mobile ad hoc networks (MANETs). The lack of central infrastructure, limited resources and high mobility make service discovery a challenging issue for this kind of network. This article proposes a new service discovery mechanism for discovering and advertising services integrated into the Optimized Link State Routing Protocol Version 2 (OLSRv2). In previous studies, we demonstrated the validity of a similar service discovery mechanism integrated into the previous version of OLSR (OLSRv1). In order to advertise services, we have added a new type-length-value structure (TLV) to the OLSRv2 protocol, called service discovery message (SDM), according to the Generalized MANET Packet/Message Format defined in Request For Comments (RFC) 5444. Each node in the ad hoc network only advertises its own services. The advertisement frequency is a user-configurable parameter, so that it can be modified depending on the user requirements. Each node maintains two service tables, one to store information about its own services and another one to store information about the services it discovers in the network. We present simulation results, that compare our service discovery integrated into OLSRv2 with the one defined for OLSRv1 and with the integration of service discovery in Ad hoc On-demand Distance Vector (AODV) protocol, in terms of service discovery ratio, service latency and network overhead.

Kaehler geometry and SUSY mechanics

International Nuclear Information System (INIS)

Bellucci, Stefano; Nersessian, Armen

2001-01-01

We present two examples of SUSY mechanics related with Kaehler geometry. The first system is the N = 4 supersymmetric one-dimensional sigma-model proposed in hep-th/0101065. Another system is the N = 2 SUSY mechanics whose phase space is the external algebra of an arbitrary Kaehler manifold. The relation of these models with antisymplectic geometry is discussed

A Novel Real-Time DDoS Attack Detection Mechanism Based on MDRA Algorithm in Big Data

Directory of Open Access Journals (Sweden)

Bin Jia

2016-01-01

Full Text Available In the wake of the rapid development and wide application of information technology and Internet, our society has come into the information explosion era. Meanwhile, it brings in new and severe challenges to the field of network attack behavior detection due to the explosive growth and high complexity of network traffic. Therefore, an effective and efficient detection mechanism that can detect attack behavior from large scale of network traffic plays an important role. In this paper, we focus on how to distinguish the attack traffic from normal data flows in Big Data and propose a novel real-time DDoS attack detection mechanism based on Multivariate Dimensionality Reduction Analysis (MDRA. In this mechanism, we first reduce the dimensionality of multiple characteristic variables in a network traffic record by Principal Component Analysis (PCA. Then, we analyze the correlation of the lower dimensional variables. Finally, the attack traffic can be differentiated from the normal traffic by MDRA and Mahalanobis distance (MD. Compared with previous research methods, our experimental results show that higher precision rate is achieved and it approximates to 100% in True Negative Rate (TNR for detection; CPU computing time is one-eightieth and memory resource consumption is one-third of the previous detection method based on Multivariate Correlation Analysis (MCA; computing complexity is constant.

Performance analysis and implementation of proposed mechanism for detection and prevention of security attacks in routing protocols of vehicular ad-hoc network (VANET

Directory of Open Access Journals (Sweden)

Parul Tyagi

2017-07-01

Full Text Available Next-generation communication networks have become widely popular as ad-hoc networks, broadly categorized as the mobile nodes based on mobile ad-hoc networks (MANET and the vehicular nodes based vehicular ad-hoc networks (VANET. VANET is aimed at maintaining safety to vehicle drivers by begin autonomous communication with the nearby vehicles. Each vehicle in the ad-hoc network performs as an intelligent mobile node characterized by high mobility and formation of dynamic networks. The ad-hoc networks are decentralized dynamic networks that need efficient and secure communication requirements due to the vehicles being persistently in motion. These networks are more susceptible to various attacks like Warm Hole attacks, denial of service attacks and Black Hole Attacks. The paper is a novel attempt to examine and investigate the security features of the routing protocols in VANET, applicability of AODV (Ad hoc On Demand protocol to detect and tackle a particular category of network attacks, known as the Black Hole Attacks. A new algorithm is proposed to enhance the security mechanism of AODV protocol and to introduce a mechanism to detect Black Hole Attacks and to prevent the network from such attacks in which source node stores all route replies in a look up table. This table stores the sequences of all route reply, arranged in ascending order using PUSH and POP operations. The priority is calculated based on sequence number and discard the RREP having presumably very high destination sequence number. The result show that proposed algorithm for detection and prevention of Black Hole Attack increases security in Intelligent Transportation System (ITS and reduces the effect of malicious node in the VANET. NCTUNs simulator is used in this research work.

Voice Coil Percussive Mechanism Concept for Hammer Drill

Science.gov (United States)

Okon, Avi

2009-01-01

A hammer drill design of a voice coil linear actuator, spring, linear bearings, and a hammer head was proposed. The voice coil actuator moves the hammer head to produce impact to the end of the drill bit. The spring is used to store energy on the retraction and to capture the rebound energy after each impact for use in the next impact. The maximum actuator stroke is 20 mm with the hammer mass being 200 grams. This unit can create impact energy of 0.4 J with 0.8 J being the maximum. This mechanism is less complex than previous devices meant for the same task, so it has less mass and less volume. Its impact rate and energy are easily tunable without changing major hardware components. The drill can be driven by two half-bridges. Heat is removed from the voice coil via CO2 conduction.

A Multistage Control Mechanism for Group-Based Machine-Type Communications in an LTE System

Directory of Open Access Journals (Sweden)

Wen-Chien Hung

2013-01-01

Full Text Available When machine-type communication (MTC devices perform the long-term evolution (LTE attach procedure without bit rate limitations, they may produce congestion in the core network. To prevent this congestion, the LTE standard suggests using group-based policing to regulate the maximum bit rate of all traffic generated by a group of MTC devices. However, previous studies on the access point name-aggregate maximum bit rate based on group-based policing are relatively limited. This study proposes a multistage control (MSC mechanism to process the operations of maximum bit rate allocation based on resource-use information. For performance evaluation, this study uses a Markov chain with to analyze MTC application in a 3GPP network. Traffic flow simulations in an LTE system indicate that the MSC mechanism is an effective bandwidth allocation method in an LTE system with MTC devices. Experimental results show that the MSC mechanism achieves a throughput 22.5% higher than that of the LTE standard model using the group-based policing, and it achieves a lower delay time and greater long-term fairness as well.

The mechanism of synchronization in feed-forward neuronal networks

International Nuclear Information System (INIS)

Goedeke, S; Diesmann, M

2008-01-01

Synchronization in feed-forward subnetworks of the brain has been proposed to explain the precisely timed spike patterns observed in experiments. While the attractor dynamics of these networks is now well understood, the underlying single neuron mechanisms remain unexplained. Previous attempts have captured the effects of the highly fluctuating membrane potential by relating spike intensity f(U) to the instantaneous voltage U generated by the input. This article shows that f is high during the rise and low during the decay of U(t), demonstrating that the U-dot-dependence of f, not refractoriness, is essential for synchronization. Moreover, the bifurcation scenario is quantitatively described by a simple f(U,U-dot) relationship. These findings suggest f(U,U-dot) as the relevant model class for the investigation of neural synchronization phenomena in a noisy environment

Impact of previously disadvantaged land-users on sustainable ...

African Journals Online (AJOL)

Impact of previously disadvantaged land-users on sustainable agricultural ... about previously disadvantaged land users involved in communal farming systems ... of input, capital, marketing, information and land use planning, with effect on ...

A proposal for a dipole-generated BLUF domain mechanism

Directory of Open Access Journals (Sweden)

Tilo eMathes

2015-11-01

Full Text Available The resting and signaling structures of the blue-light sensing using flavin (BLUF photoreceptor domains are still controversially debated due to differences in the molecular models obtained by crystal and NMR structures. Photocycles for the given preferred structural framework have been established, but a unifying picture combining experiment and theory remains elusive. We summarize present work on the AppA BLUF domain from both experiment and theory. We focus on IR and UV/vis spectra, and to what extent theory was able to reproduce experimental data and predict the structural changes upon formation of the signaling state. We find that the experimental observables can be theoretically reproduced employing any structural model, as long as the orientation of the signaling essential Gln63 and its tautomer state are a choice of the modeler. We also observe that few approaches are comparative, e.g. by considering all structures in the same context. Based on recent experimental findings and a few basic calculations, we suggest the possibility for a BLUF activation mechanism that only relies on electron transfer and its effect on the local electrostatics, not requiring an associated proton transfer. In this regard, we investigate the impact of dispersion correction on the interaction energies arising from weakly bound amino acids.

Santilli’s hadronic mechanics of formation of deuteron

International Nuclear Information System (INIS)

Dhondge, Sudhakar S.

2015-01-01

In the present communication a brief review of the structure of deuteron proposed by Professor Santilli [1, 2] and its physical properties have been presented. Although Deuteron is a simple molecule, quantum mechanics has been unable to explain its different properties like the spin, magnetic moment, binding energy, stability, charge radius, dipole moment, etc. However, the Hadronic Mechanics developed by Santilli and applied by him [1, 2] to deuteron has succeeded in explaining the above properties to the scientific satisfaction. Santilli proposed Deuteron as a three body system which could take care of all the insufficiencies of quantum mechanics

Media Accountability Systems: Models, proposals and outlooks

Directory of Open Access Journals (Sweden)

Luiz Martins da Silva

2007-06-01

Full Text Available This paper analyzes one of the basic actions of SOS-Imprensa, the mechanism to assure Media Accountability with the goal of proposing a synthesis of models for the Brazilian reality. The article aims to address the possibilities of creating and improving mechanisms to stimulate the democratic press process and to mark out and assure freedom of speech and personal rights with respect to the media. Based on the Press Social Responsibility Theory, the hypothesis is that the experiences analyzed (Communication Council, Press Council, Ombudsman and Readers Council are alternatives for accountability, mediation and arbitration, seeking visibility, trust and public support in favor of fairer media.

Three proposals to increase Australia's organ supply.

Science.gov (United States)

Isdale, William; Savulescu, Julian

2015-01-01

In 2008 the Australian Government introduced a national reform agenda to increase organ and tissue donation. Australia continues to perform poorly by international standards on measures of organ procurement, however. This paper outlines three proposals to improve donation rates and considers the empirical evidence available for each. A number of ethical objections frequently given to resist such proposals are also addressed. Firstly, it is recommended that Australia implement an 'opt-out' system of organ donation. Secondly, the existing veto rules should be changed to better protect the wishes of those who wish to donate. Finally, a numer of incentives should be offered to increase donation rates; these could include incentives of financial value, but also non-financial incentives such as prioritisation for the receipt of organs for previous donors.

Sensitivity Analysis of a Proposed Novel Opto-Nano-Mechanical Photodetector for Improving the Performance of LIDAR and Local Optical Sensors

International Nuclear Information System (INIS)

Berman, Gennady P; Bishop, Alan R; Chernobrod, Boris M; Hawley, Marilyn E; Brown, Geoffrey W

2006-01-01

We propose a novel approach to the development of a new generation of optical sensors with enhanced detection sensitivity for chemical species. The novelty comes from combining an extremely high Q cantilever sensor with an already well established very sensitive technique, frequency modulation (FM) spectroscopy. In existing implementations, this inherent sensitivity is limited by the inadequacy of current state-of-the-art electronic filters to differentiate the weak amplitude modulated (AM) signal from the inevitable high-frequency laser noise, a consequence of the deterioration in the quality factor with increasing frequency exhibited by these filters. Our approach combines FM techniques with the rapidly advancing technology of nano-mechanical resonator (cantilever) development. Here a cantilever functions as both a sensitive photodetector and a high-quality spectral or temporal filter. These ultra-low mass devices enable detection of the photon momentum rather than conventional detection by photon energy. At least one order of magnitude enhancement appears feasible with existing cantilever technology

Sensitivity Analysis of a Proposed Novel Opto-Nano-Mechanical Photodetector for Improving the Performance of LIDAR and Local Optical Sensors

Energy Technology Data Exchange (ETDEWEB)

Berman, Gennady P; Bishop, Alan R; Chernobrod, Boris M; Hawley, Marilyn E; Brown, Geoffrey W [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)

2006-05-15

We propose a novel approach to the development of a new generation of optical sensors with enhanced detection sensitivity for chemical species. The novelty comes from combining an extremely high Q cantilever sensor with an already well established very sensitive technique, frequency modulation (FM) spectroscopy. In existing implementations, this inherent sensitivity is limited by the inadequacy of current state-of-the-art electronic filters to differentiate the weak amplitude modulated (AM) signal from the inevitable high-frequency laser noise, a consequence of the deterioration in the quality factor with increasing frequency exhibited by these filters. Our approach combines FM techniques with the rapidly advancing technology of nano-mechanical resonator (cantilever) development. Here a cantilever functions as both a sensitive photodetector and a high-quality spectral or temporal filter. These ultra-low mass devices enable detection of the photon momentum rather than conventional detection by photon energy. At least one order of magnitude enhancement appears feasible with existing cantilever technology.

Mechanics of fiber reinforced materials

Science.gov (United States)

Sun, Huiyu

This dissertation is dedicated to mechanics of fiber reinforced materials and the woven reinforcement and composed of four parts of research: analytical characterization of the interfaces in laminated composites; micromechanics of braided composites; shear deformation, and Poisson's ratios of woven fabric reinforcements. A new approach to evaluate the mechanical characteristics of interfaces between composite laminae based on a modified laminate theory is proposed. By including an interface as a special lamina termed the "bonding-layer" in the analysis, the mechanical properties of the interfaces are obtained. A numerical illustration is given. For micro-mechanical properties of three-dimensionally braided composite materials, a new method via homogenization theory and incompatible multivariable FEM is developed. Results from the hybrid stress element approach compare more favorably with the experimental data than other existing numerical methods widely used. To evaluate the shearing properties for woven fabrics, a new mechanical model is proposed during the initial slip region. Analytical results show that this model provides better agreement with the experiments for both the initial shear modulus and the slipping angle than the existing models. Finally, another mechanical model for a woven fabric made of extensible yarns is employed to calculate the fabric Poisson's ratios. Theoretical results are compared with the available experimental data. A thorough examination on the influences of various mechanical properties of yarns and structural parameters of fabrics on the Poisson's ratios of a woven fabric is given at the end.

Continuous Biometric Authentication for Authorized Aircraft Personnel: A Proposed Design

National Research Council Canada - National Science Library

Carrillo, Cassandra

2003-01-01

.... The primary goal of this thesis is to propose a hypothetical design for the use of a non- intrusive mechanism on the flight deck of an aircraft to provide continuous or periodic authentication...

Determining root correspondence between previously and newly detected objects

Science.gov (United States)

Paglieroni, David W.; Beer, N Reginald

2014-06-17

A system that applies attribute and topology based change detection to networks of objects that were detected on previous scans of a structure, roadway, or area of interest. The attributes capture properties or characteristics of the previously detected objects, such as location, time of detection, size, elongation, orientation, etc. The topology of the network of previously detected objects is maintained in a constellation database that stores attributes of previously detected objects and implicitly captures the geometrical structure of the network. A change detection system detects change by comparing the attributes and topology of new objects detected on the latest scan to the constellation database of previously detected objects.

The effect of fast and slow motor unit activation on whole-muscle mechanical performance: the size principle may not pose a mechanical paradox.

Science.gov (United States)

Holt, N C; Wakeling, J M; Biewener, A A

2014-05-22

The output of skeletal muscle can be varied by selectively recruiting different motor units. However, our knowledge of muscle function is largely derived from muscle in which all motor units are activated. This discrepancy may limit our understanding of in vivo muscle function. Hence, this study aimed to characterize the mechanical properties of muscle with different motor unit activation. We determined the isometric properties and isotonic force-velocity relationship of rat plantaris muscles in situ with all of the muscle active, 30% of the muscle containing predominately slower motor units active or 20% of the muscle containing predominately faster motor units active. There was a significant effect of active motor unit type on isometric force rise time (p motor units were active than when either fast or slow motor units were selectively activated. We propose this is due to the greater relative effects of factors such as series compliance and muscle resistance to shortening during sub-maximal contractions. The findings presented here suggest that recruitment according to the size principle, where slow motor units are activated first and faster ones recruited as demand increases, may not pose a mechanical paradox, as has been previously suggested.

Classicality in quantum mechanics

Energy Technology Data Exchange (ETDEWEB)

Dreyer, Olaf [Theoretical Physics, Blackett Laboratory, Imperial College London, London, SW7 2AZ (United Kingdom)

2007-05-15

In this article we propose a solution to the measurement problem in quantum mechanics. We point out that the measurement problem can be traced to an a priori notion of classicality in the formulation of quantum mechanics. If this notion of classicality is dropped and instead classicality is defined in purely quantum mechanical terms the measurement problem can be avoided. We give such a definition of classicality. It identifies classicality as a property of large quantum system. We show how the probabilistic nature of quantum mechanics is a result of this notion of classicality. We also comment on what the implications of this view are for the search of a quantum theory of gravity.

Classicality in quantum mechanics

International Nuclear Information System (INIS)

Dreyer, Olaf

2007-01-01

In this article we propose a solution to the measurement problem in quantum mechanics. We point out that the measurement problem can be traced to an a priori notion of classicality in the formulation of quantum mechanics. If this notion of classicality is dropped and instead classicality is defined in purely quantum mechanical terms the measurement problem can be avoided. We give such a definition of classicality. It identifies classicality as a property of large quantum system. We show how the probabilistic nature of quantum mechanics is a result of this notion of classicality. We also comment on what the implications of this view are for the search of a quantum theory of gravity

Using molecular dynamics simulations and finite element method to study the mechanical properties of nanotube reinforced polyethylene and polyketone

Science.gov (United States)

Rouhi, S.; Alizadeh, Y.; Ansari, R.; Aryayi, M.

2015-09-01

Molecular dynamics simulations are used to study the mechanical behavior of single-walled carbon nanotube reinforced composites. Polyethylene and polyketone are selected as the polymer matrices. The effects of nanotube atomic structure and diameter on the mechanical properties of polymer matrix nanocomposites are investigated. It is shown that although adding nanotube to the polymer matrix raises the longitudinal elastic modulus significantly, the transverse tensile and shear moduli do not experience important change. As the previous finite element models could not be used for polymer matrices with the atom types other than carbon, molecular dynamics simulations are used to propose a finite element model which can be used for any polymer matrices. It is shown that this model can predict Young’s modulus with an acceptable accuracy.

Dynamic Symmetric Key Mobile Commerce Scheme Based on Self-Verified Mechanism

Directory of Open Access Journals (Sweden)

Jiachen Yang

2014-01-01

Full Text Available In terms of the security and efficiency of mobile e-commerce, the authors summarized the advantages and disadvantages of several related schemes, especially the self-verified mobile payment scheme based on the elliptic curve cryptosystem (ECC and then proposed a new type of dynamic symmetric key mobile commerce scheme based on self-verified mechanism. The authors analyzed the basic algorithm based on self-verified mechanisms and detailed the complete transaction process of the proposed scheme. The authors analyzed the payment scheme based on the security and high efficiency index. The analysis shows that the proposed scheme not only meets the high efficiency of mobile electronic payment premise, but also takes the security into account. The user confirmation mechanism at the end of the proposed scheme further strengthens the security of the proposed scheme. In brief, the proposed scheme is more efficient and practical than most of the existing schemes.

Transgenic Analysis of the Leishmania MAP Kinase MPK10 Reveals an Auto-inhibitory Mechanism Crucial for Stage-Regulated Activity and Parasite Viability

DEFF Research Database (Denmark)

Cayla, M.; Rachidi, N.; Leclercq, O.

2014-01-01

Protozoan pathogens of the genus Leishmania have evolved unique signaling mechanisms that can sense changes in the host environment and trigger adaptive stage differentiation essential for host cell infection. The signaling mechanisms underlying parasite development remain largely elusive even...... though Leishmania mitogen-activated protein kinases (MAPKs) have been linked previously to environmentally induced differentiation and virulence. Here, we unravel highly unusual regulatory mechanisms for Leishmania MAP kinase 10 (MPK10). Using a transgenic approach, we demonstrate that MPK10 is stage...... at position 395 that could be implicated in kinase regulation. Finally, we uncovered a feedback loop that limits MPK10 activity through dephosphorylation of the tyrosine residue of the TxY motif. Together our data reveal novel aspects of protein kinase regulation in Leishmania, and propose MPK10...

Structured Mechanical Collage.

Science.gov (United States)

Huang, Zhe; Wang, Jiang; Fu, Hongbo; Lau, Rynson W H

2014-07-01

We present a method to build 3D structured mechanical collages consisting of numerous elements from the database given artist-designed proxy models. The construction is guided by some graphic design principles, namely unity, variety and contrast. Our results are visually more pleasing than previous works as confirmed by a user study.

Mechanism of host substrate acetylation by a YopJ family effector.

Science.gov (United States)

Zhang, Zhi-Min; Ma, Ka-Wai; Gao, Linfeng; Hu, Zhenquan; Schwizer, Simon; Ma, Wenbo; Song, Jikui

2017-07-24

The Yersinia outer protein J (YopJ) family of bacterial effectors depends on a novel acetyltransferase domain to acetylate signalling proteins from plant and animal hosts. However, the underlying mechanism is unclear. Here, we report the crystal structures of PopP2, a YopJ effector produced by the plant pathogen Ralstonia solanacearum, in complex with inositol hexaphosphate (InsP 6 ), acetyl-coenzyme A (AcCoA) and/or substrate Resistance to Ralstonia solanacearum 1 (RRS1-R) WRKY . PopP2 recognizes the WRKYGQK motif of RRS1-R WRKY to position a targeted lysine in the active site for acetylation. Importantly, the PopP2-RRS1-R WRKY association is allosterically regulated by InsP 6 binding, suggesting a previously unidentified role of the eukaryote-specific cofactor in substrate interaction. Furthermore, we provide evidence for the reaction intermediate of PopP2-mediated acetylation, an acetyl-cysteine covalent adduct, lending direct support to the 'ping-pong'-like catalytic mechanism proposed for YopJ effectors. Our study provides critical mechanistic insights into the virulence activity of YopJ class of acetyltransferases.

Proposal of the penalty factor equations considering weld strength over-match

International Nuclear Information System (INIS)

Kim, Jong Sung; Jeong, Jae Wook; Lee, Kang Yong

2017-01-01

This paper proposes penalty factor equations that take into consideration the weld strength over-match given in the classified form similar to the revised equations presented in the Code Case N-779 via cyclic elastic-plastic finite element analysis. It was found that the Ke analysis data reflecting elastic follow-up can be consolidated by normalizing the primary-plus-secondary stress intensity ranges excluding the nonlinear thermal stress intensity component, S_n to over-match degree of yield strength, M_F. For the effect of over-match on K_n × K_v_"1, dispersion of the Kn × K_v analysis data can be sharply reduced by dividing total stress intensity range, excluding local thermal stresses, S_p_-_l_t by M_F. Finally, the proposed equations were applied to the weld between the safe end and the piping of a pressurizer surge nozzle in pressurized water reactors in order to calculate a cumulative usage factor. The cumulative usage factor was then compared with those derived by the previous K_e factor equations. The result shows that application of the proposed equations can significantly reduce conservatism of fatigue assessment using the previous K_e factor equations

Proposal of the Penalty Factor Equations Considering Weld Strength Over-Match

Directory of Open Access Journals (Sweden)

Jong-Sung Kim

2017-06-01

Full Text Available This paper proposes penalty factor equations that take into consideration the weld strength over-match given in the classified form similar to the revised equations presented in the Code Case N-779 via cyclic elastic-plastic finite element analysis. It was found that the Ke analysis data reflecting elastic follow-up can be consolidated by normalizing the primary-plus-secondary stress intensity ranges excluding the nonlinear thermal stress intensity component, Sn to over-match degree of yield strength, MF. For the effect of over-match on Kn × Κν, dispersion of the Kn × Κν analysis data can be sharply reduced by dividing total stress intensity range, excluding local thermal stresses, Sp-lt by MF. Finally, the proposed equations were applied to the weld between the safe end and the piping of a pressurizer surge nozzle in pressurized water reactors in order to calculate a cumulative usage factor. The cumulative usage factor was then compared with those derived by the previous Ke factor equations. The result shows that application of the proposed equations can significantly reduce conservatism of fatigue assessment using the previous Ke factor equations.

Kidney branching morphogenesis under the control of a ligand–receptor-based Turing mechanism

International Nuclear Information System (INIS)

Menshykau, Denis; Iber, Dagmar

2013-01-01

The main signalling proteins that control early kidney branching have been defined. Yet the underlying mechanism is still elusive. We have previously shown that a Schnakenberg-type Turing mechanism can recapitulate the branching and protein expression patterns in wild-type and mutant lungs, but it is unclear whether this mechanism would extend to other branched organs that are regulated by other proteins. Here, we show that the glial cell line-derived neurotrophic factor–RET regulatory interaction gives rise to a Schnakenberg-type Turing model that reproduces the observed budding of the ureteric bud from the Wolffian duct, its invasion into the mesenchyme and the observed branching pattern. The model also recapitulates all relevant protein expression patterns in wild-type and mutant mice. The lung and kidney models are both based on a particular receptor–ligand interaction and require (1) cooperative binding of ligand and receptor, (2) a lower diffusion coefficient for the receptor than for the ligand and (3) an increase in the receptor concentration in response to receptor–ligand binding (by enhanced transcription, more recycling or similar). These conditions are met also by other receptor–ligand systems. We propose that ligand–receptor-based Turing patterns represent a general mechanism to control branching morphogenesis and other developmental processes. (paper)

On the mechanism of high product selectivity for HCOOH using Pb in CO2 electroreduction.

Science.gov (United States)

Back, Seoin; Kim, Jun-Hyuk; Kim, Yong-Tae; Jung, Yousung

2016-04-14

While achieving high product selectivity is one of the major challenges of the CO2 electroreduction technology in general, Pb is one of the few examples with high selectivity that produces formic acid almost exclusively (versus H2, CO, or other byproducts). In this work, we study the mechanism of CO2 electroreduction reactions using Pb to understand the origin of high formic acid selectivity. In particular, we first assess the proton-assisted mechanism proposed in the literature using density functional calculations and find that it cannot fully explain the previous selectivity experiments for the Pb electrode. We then suggest an alternative proton-coupled-electron-transfer mechanism consistent with existing observations, and further validate a new mechanism by experimentally measuring and comparing the onset potentials for CO2 reduction vs. H2 production. We find that the origin of a high selectivity of the Pb catalyst for HCOOH production over CO and H2 lies in the strong O-affinitive and weak C-, H-affinitive characteristics of Pb, leading to the involvement of the *OCHO species as a key intermediate to produce HCOOH exclusively and preventing unwanted H2 production at the same time.

Theoretical physics 2 analytical mechanics

CERN Document Server

Nolting, Wolfgang

2016-01-01

This textbook offers a clear and comprehensive introduction to analytical mechanics, one of the core components of undergraduate physics courses.It follows on naturally from the previous volumes in this series, thus expanding the knowledge in classical mechanics. The book starts with a thorough introduction into Lagrangian mechanics, detailing the d’Alembert principle, Hamilton’s principle and conservation laws. It continues with an in-depth explanation of Hamiltonian mechanics, illustrated by canonical and Legendre transformation, the generalization to quantum mechanics through Poisson brackets and all relevant variational principles. Finally, the Hamilton-Jacobi theory and the transition to wave mechanics are presented in detail. Ideally suited to undergraduate students with some grounding in classical mechanics, the book is enhanced throughout with learning features such as boxed inserts and chapter summaries, with key mathematical derivations highlighted to aid understanding. The text is supported by ...

A Proposed Mechanism for Development of CTE Following Concussive Events: Head Impact, Water Hammer Injury, Neurofilament Release, and Autoimmune Processes

Directory of Open Access Journals (Sweden)

Steven Kornguth

2017-12-01

Full Text Available During the past decade, there has been an increasing interest in early diagnosis and treatment of traumatic brain injuries (TBI that lead to chronic traumatic encephalopathy (CTE. The subjects involved range from soldiers exposed to concussive injuries from improvised explosive devices (IEDs to a significant number of athletes involved in repetitive high force impacts. Although the forces from IEDs are much greater by a magnitude than those from contact sports, the higher frequency associated with contact sports allows for more controlled assessment of the mechanism of action. In our study, we report findings in university-level women soccer athletes followed over a period of four and a half years from accession to graduation. Parameters investigated included T1-, T2-, and susceptibility-weighted magnetic resonance images (SWI, IMPACT (Immediate Post-Concussion Assessment and Cognitive Testing, and C3 Logix behavioral and physiological assessment measures. The MRI Studies show several significant findings: first, a marked increase in the width of sulci in the frontal to occipital cortices; second, an appearance of subtle hemorrhagic changes at the base of the sulci; third was a sustained reduction in total brain volume in several soccer players at a developmental time when brain growth is generally seen. Although all of the athletes successfully completed their college degree and none exhibited long term clinical deficits at the time of graduation, the changes documented by MRI represent a clue to the pathological mechanism following an injury paradigm. The authors propose that our findings and those of prior publications support a mechanism of injury in CTE caused by an autoimmune process associated with the release of neural proteins from nerve cells at the base of the sulcus from a water hammer injury effect. As evidence accumulates to support this hypothesis, there are pharmacological treatment strategies that may be able to mitigate the

Weight gain following breast cancer diagnosis: Implication and proposed mechanisms

Science.gov (United States)

Makari-Judson, Grace; Braun, Barry; Jerry, D Joseph; Mertens, Wilson C

2014-01-01

Weight gain occurs in the majority of women following breast cancer treatment. An overview of studies describing weight gain amongst women treated with early to modern chemotherapy regimens is included. Populations at higher risk include women who are younger, closer to ideal body weight and who have been treated with chemotherapy. Weight gain ranges between 1 to 5 kg, and may be associated with change in body composition with gain in fat mass and loss in lean body mass. Women are unlikely to return to pre-diagnosis weight. Possible mechanisms including inactivity and metabolic changes are explored. Potential interventions are reviewed including exercise, dietary changes and pharmacologic agents. Although breast cancer prognosis does not appear to be significantly impacted, weight gain has negative consequences on quality of life and overall health. Future studies should explore change in body composition, metabolism and insulin resistance. Avoiding weight gain in breast cancer survivors following initial diagnosis and treatment should be encouraged. PMID:25114844

Review of the proposed materials of construction for the SBWR and AP600 advanced reactors

International Nuclear Information System (INIS)

Diercks, D.R.; Shack, W.J.; Chung, H.M.; Kassner, T.F.

1994-06-01

Two advanced light water reactor (LWR) concepts, namely the General Electric Simplified Boiling Water Reactor (SBWR) and the Westinghouse Advanced Passive 600 MWe Reactor (AP600), were reviewed in detail by Argonne National Laboratory. The objectives of these reviews were to (a) evaluate proposed advanced-reactor designs and the materials of construction for the safety systems, (b) identify all aging and environmentally related degradation mechanisms for the materials of construction, and (c) evaluate from the safety viewpoint the suitability of the proposed materials for the design application. Safety-related systems selected for review for these two LWRs included (a) reactor pressure vessel, (b) control rod drive system and reactor internals, (c) coolant pressure boundary, (d) engineered safety systems, (e) steam generators (AP600 only), (f) turbines, and (g) fuel storage and handling system. In addition, the use of cobalt-based alloys in these plants was reviewed. The selected materials for both reactors were generally sound, and no major selection errors were found. It was apparent that considerable thought had been given to the materials selection process, making use of lessons learned from previous LWR experience. The review resulted in the suggestion of alternate an possibly better materials choices in a number of cases, and several potential problem areas have been cited

Phytoplankton defence mechanisms: traits and trade-offs

DEFF Research Database (Denmark)

Pančić, Marina; Kiørboe, Thomas

2018-01-01

mechanisms in phytoplankton are diverse and include physiological (e.g. toxicity, bioluminescence), morphological (e.g. silica shell, colony formation), and behavioural (e.g. escape response) traits. However, the function of many of the proposed defence mechanisms remains elusive, and the costs and benefits...

Some speculations on a beginning of a causal unified model of relativity, gravitation and quantum mechanics

International Nuclear Information System (INIS)

Buonomano, V.; Engel, A.

1974-10-01

Some speculations on a causal model that seems to provide a common conceptual foundation for Relativity Gravitation and Quantum Mechanics are presented. The present approach is a unifying of three theories. The first being the repulsive theory of gravitational forces first proposed by Lesage in the eighteenth century. The second of these theories is the Brownian Motion Theory of Quantum Mechanics or Stocastic Mechanics which treats the non-deterministic Nature of Quantum Mechanics as being due to a Brownian motion of all objects. This Brownian motion being caused by the statistical variation in the graviton flux. The above two theories are unified with the Causal Theory of Special Relativity. Within the present context, the time dilations (and other effects) of Relativity are explained by assuming that the rate of a clock is a function of the total number or intensity of gravitons and the average frequency or energy of the gravitons that the clock receives. The Special Theory would then be the special case of the General Theory where the intensity is constant but the average frequency varies. In all the previous it is necessary to assume a particular model of the creation of the universe, namely the Big Bang Theory. This assumption gives us the existence of a preferred reference frame, the frame in which the Big Bang explosion was at rest. The above concepts of graviton distribution and real time dilations become meaningful by assuming the Big Bang Theory along with this preferred frame. An experimental test is proposed

Pseudospectra in non-Hermitian quantum mechanics

Science.gov (United States)

Krejčiřík, D.; Siegl, P.; Tater, M.; Viola, J.

2015-10-01

We propose giving the mathematical concept of the pseudospectrum a central role in quantum mechanics with non-Hermitian operators. We relate pseudospectral properties to quasi-Hermiticity, similarity to self-adjoint operators, and basis properties of eigenfunctions. The abstract results are illustrated by unexpected wild properties of operators familiar from PT -symmetric quantum mechanics.

Theoretical description of quantum mechanical permeation of graphene membranes by charged hydrogen isotopes

Science.gov (United States)

Mazzuca, James W.; Haut, Nathaniel K.

2018-06-01

It has been recently shown that in the presence of an applied voltage, hydrogen and deuterium nuclei can be separated from one another using graphene membranes as a nuclear sieve, resulting in a 10-fold enhancement in the concentration of the lighter isotope. While previous studies, both experimental and theoretical, have attributed this effect mostly to differences in vibrational zero point energy (ZPE) of the various isotopes near the membrane surface, we propose that multi-dimensional quantum mechanical tunneling of nuclei through the graphene membrane influences this proton permeation process in a fundamental way. We perform ring polymer molecular dynamics calculations in which we include both ZPE and tunneling effects of various hydrogen isotopes as they permeate the graphene membrane and compute rate constants across a range of temperatures near 300 K. While capturing the experimentally observed separation factor, our calculations indicate that the transverse motion of the various isotopes across the surface of the graphene membrane is an essential part of this sieving mechanism. An understanding of the multi-dimensional quantum mechanical nature of this process could serve to guide the design of other such isotopic enrichment processes for a variety of atomic and molecular species of interest.

Theoretical description of quantum mechanical permeation of graphene membranes by charged hydrogen isotopes.

Science.gov (United States)

Mazzuca, James W; Haut, Nathaniel K

2018-06-14

It has been recently shown that in the presence of an applied voltage, hydrogen and deuterium nuclei can be separated from one another using graphene membranes as a nuclear sieve, resulting in a 10-fold enhancement in the concentration of the lighter isotope. While previous studies, both experimental and theoretical, have attributed this effect mostly to differences in vibrational zero point energy (ZPE) of the various isotopes near the membrane surface, we propose that multi-dimensional quantum mechanical tunneling of nuclei through the graphene membrane influences this proton permeation process in a fundamental way. We perform ring polymer molecular dynamics calculations in which we include both ZPE and tunneling effects of various hydrogen isotopes as they permeate the graphene membrane and compute rate constants across a range of temperatures near 300 K. While capturing the experimentally observed separation factor, our calculations indicate that the transverse motion of the various isotopes across the surface of the graphene membrane is an essential part of this sieving mechanism. An understanding of the multi-dimensional quantum mechanical nature of this process could serve to guide the design of other such isotopic enrichment processes for a variety of atomic and molecular species of interest.

A rare case of failed healing in previously burned skin after a secondary burns.

Science.gov (United States)

Goldie, Stephen J; Parsons, Shaun; Menezes, Hana; Ives, Andrew; Cleland, Heather

2017-01-01

Patients presenting with large surface area burns are common in our practice; however, patients with a secondary large burn on pre-existing burn scars and grafts are rare and not reported. We report on an unusual case of a patient sustaining a secondary large burn to areas previously injured by a burn from a different mechanism. We discuss the potential implications when managing a case like this and suggest potential biological reasons why the skin may behave differently. Our patient was a 33-year-old man who presented with a 5% TBSA burn on skin scarred by a previous 40% total body surface area (TBSA) burn and skin grafts. Initially assessed as superficial partial thickness in depth, the wounds were treated conservatively with dressings; however, they failed to heal and became infected requiring surgical management. Burns sustained in areas of previous burn scars and grafts may behave differently to normal patterns of healing, requiring more aggressive management and surgical intervention at an early stage.

Mechanical Biological Treatment

DEFF Research Database (Denmark)

Bilitewski, B-; Oros, Christiane; Christensen, Thomas Højlund

2011-01-01

The basic processes and technologies of composting and anaerobic digestion, as described in the previous chapters, are usually used for specific or source-separated organic waste flows. However, in the 1990s mechanical biological waste treatment technologies (MBT) were developed for unsorted...... or residual waste (after some recyclables removed at the source). The concept was originally to reduce the amount of waste going to landfill, but MBT technologies are today also seen as plants recovering fuel as well as material fractions. As the name suggests the technology combines mechanical treatment...... technologies (screens, sieves, magnets, etc.) with biological technologies (composting, anaerobic digestion). Two main technologies are available: Mechanical biological pretreatment (MBP), which first removes an RDF fraction and then biologically treats the remaining waste before most of it is landfilled...

Automatic electromagnetic valve for previous vacuum

International Nuclear Information System (INIS)

Granados, C. E.; Martin, F.

1959-01-01

A valve which permits the maintenance of an installation vacuum when electric current fails is described. It also lets the air in the previous vacuum bomb to prevent the oil ascending in the vacuum tubes. (Author)

Mechanisms and mechanics of porosity formation in ductile iron castings

Directory of Open Access Journals (Sweden)

M. Perzyk

2007-12-01

Full Text Available Shrinkage defects in ductile iron castings can be of two basic types: shrinkage cavities associated with the liquid contraction prior to the expansion period of the iron as well as the porosity, which may appear even if the liquid shrinkage is fully compensated. In the present paper two possible mechanisms of the porosity are presented and analyzed. The first one is the Karsay’s mechanism based on the secondary shrinkage concept. The second one is the mechanism acting during the expansion period of the iron, first suggested by Ohnaka and co-authors and essentially modified by the present authors. The mechanical interactions between casting and mould are determined for the both mechanisms. Their analysis leads to the conclusion, that porosity forms during expansion period of the melt. The direct cause is the negative pressure which appears in the central part of the casting due to the differences in expansion coefficients of the fast cooling surface layer and slow cooling inner region. Observations concerning feeding behavior of ductile iron castings, based on this mechanism, agree well with industrial practice. The secondary shrinkage is not only needless to induce the porosity, but the corresponding mechanism of its occurrence, proposed by Karsay, does not seem to be valid.

Distinctive distribution of lymphocytes in unruptured and previously untreated brain arteriovenous malformation

Directory of Open Access Journals (Sweden)

Yi Guo

2014-12-01

Full Text Available Aim: To test the hypothesis that lymphocyte infiltration in brain arteriovenous malformation (bAVM is not associated with iron deposition (indicator of micro-hemorrhage. Methods: Sections of unruptured, previously untreated bAVM specimens (n = 19 were stained immunohistochemically for T-lymphocytes (CD3 + , B-lymphocytes (CD20 + , plasma cells (CD138 + and macrophages (CD68 + . Iron deposition was assessed by hematoxylin and eosin and Prussian blue stains. Superficial temporal arteries (STA were used as control. Results: Both T-lymphocytes and macrophages were present in unruptured, previously untreated bAVM specimens, whereas few B cells and plasma cells were detected. Iron deposition was detected in 8 specimens (42%; 95% confidence intervals = 20-67%. The samples with iron deposition tended to have more macrophages than those without (666 ± 313 vs. 478 ± 174 cells/mm 2 ; P = 0.11. T-cells were clustered on the luminal side of the endothelial surface, on the vessel-wall, and in the perivascular regions. There was no correlation between T-lymphocyte load and iron deposition (P = 0.88. No macrophages and lymphocytes were detected in STA controls. Conclusion: T-lymphocytes were present in bAVM specimens. Unlike macrophages, the load and location of T-lymphocytes were not associated with iron deposition, suggesting the possibility of an independent cell-mediated immunological mechanism in bAVM pathogenesis.

Clinical presentation of acute coronary syndrome in patients previously treated with nitrates.

Science.gov (United States)

Latour-Pérez, Jaime; Gómez-Tello, Vicente; Fuset-Cabanes, María Paz; Balsa, Eva de Miguel; Sáez, Frutos Del Nogal; Orts, Francisco Javier Coves; Rodríguez, Carmen Martín; Pino-Izquierdo, Karel; Pesquera, María de la Concepción Pavía; Rodríguez, Antonio José Montón

2013-11-01

Several reports have suggested that nitrates limit acute ischaemic damage by a mechanism similar to preconditioning. This study aims to evaluate the effect of chronic oral nitrates on the clinical presentation and short-term outcomes of patients admitted with acute coronary syndrome (ACS). A retrospective cohort study was conducted in patients with ACS admitted to 62 acute care units from 2010 to 2011. A propensity score-matched samples analysis was performed. We analysed 3171 consecutive patients, of whom 298 (9.4%) were chronically treated with nitrates. Patients previously treated with nitrates had higher comorbidity and disease severity at admission, lower prevalence of ACS with ST elevation, lower troponin elevation, higher prevalence of initial Killip class 2-4 and higher hospital mortality. The propensity score-matched analysis confirmed that previous use of nitrates is independently associated with a lower prevalence of ST-elevation ACS [odds ratio (OR) 0.53, 95% confidence interval (CI) 0.36-0.78; P = 0.0014] and a lower troponin elevation (OR 0.61, 95% CI 0.41-0.92) but not with Killip class on admission (OR 1.18, 95% CI 0.83-1.67, P = 0.3697) or mortality (OR 0.71, 95% CI 0.37-1.38, P = 0.3196). The results support the hypothesis that nitrates have a protective effect on acute ischaemic injury.

Qualitative insights on fundamental mechanics

International Nuclear Information System (INIS)

Mardari, Ghenadie N

2007-01-01

The gap between classical mechanics and quantum mechanics has an important interpretive implication: the Universe must have an irreducible fundamental level, which determines the properties of matter at higher levels of organization. We show that the main parameters of any fundamental model must be theory-independent. Moreover, such models must also contain discrete identical entities with constant properties. These conclusions appear to support the work of Kaniadakis on subquantum mechanics. A qualitative analysis is offered to suggest compatibility with relevant phenomena, as well as to propose new means for verification

GRI proposes to hold the line on research program

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper reports that the Gas Research Institute has proposed a 1993 US research and development program totaling $201.8 million, the same level as the 1991 but down from $212.9 million this year. GRI filed the 1993 proposal and its 1993-97 R and D plan with the Federal Energy Regulatory Commission. If FERC approves the plan, interstate gas pipeline companies would support the GRI research by collecting a surcharge of 1.51 cents/Mcf on nondiscounted gas transactions and 8 cents/Mcf/month on uniform demand or reservations. The proposed budget is based on a revised funding mechanism FERC is considering for GRI. The research agency's general expanses and capital budget would remain at the 1992 level of $9.8 million

Effects of Mechanical Properties on Tumor Invasion: Insights from a Cellular Model

KAUST Repository

Li, YZ

2014-08-01

Understanding the regulating mechanism of tumor invasion is of crucial importance for both fundamental cancer research and clinical applications. Previous in vivo experiments have shown that invasive cancer cells dissociate from the primary tumor and invade into the stroma, forming an irregular invasive morphology. Although cell movements involved in tumor invasion are ultimately driven by mechanical forces of cell-cell interactions and tumor-host interactions, how these mechanical properties affect tumor invasion is still poorly understood. In this study, we use a recently developed two-dimensional cellular model to study the effects of mechanical properties on tumor invasion. We study the effects of cell-cell adhesions as well as the degree of degradation and stiffness of extracellular matrix (ECM). Our simulation results show that cell-cell adhesion relationship must be satisfied for tumor invasion. Increased adhesion to ECM and decreased adhesion among tumor cells result in invasive tumor behaviors. When this invasive behavior occurs, ECM plays an important role for both tumor morphology and the shape of invasive cancer cells. Increased stiffness and stronger degree of degradation of ECM promote tumor invasion, generating more aggressive tumor invasive morphologies. It can also generate irregular shape of invasive cancer cells, protruding towards ECM. The capability of our model suggests it a useful tool to study tumor invasion and might be used to propose optimal treatment in clinical applications.

Summary and synthesis: How to present a research proposal

Directory of Open Access Journals (Sweden)

Maninder Singh Setia

2017-01-01

Full Text Available This concluding module attempts to synthesize the key learning points discussed during the course of the previous ten sets of modules on methodology and biostatistics. The objective of this module is to discuss how to present a model research proposal, based on whatever was discussed in the preceding modules. The lynchpin of a research proposal is the protocol, and the key component of a protocol is the study design. However, one must not neglect the other areas, be it the project summary through which one catches the eyes of the reviewer of the proposal, or the background and the literature review, or the aims and objectives of the study. Two critical areas in the “methods” section that cannot be emphasized more are the sampling strategy and a formal estimation of sample size. Without a legitimate sample size, none of the conclusions based on the statistical analysis would be valid. Finally, the ethical parameters of the study should be well understood by the researchers, and that should get reflected in the proposal.

Summary and Synthesis: How to Present a Research Proposal.

Science.gov (United States)

Setia, Maninder Singh; Panda, Saumya

2017-01-01

This concluding module attempts to synthesize the key learning points discussed during the course of the previous ten sets of modules on methodology and biostatistics. The objective of this module is to discuss how to present a model research proposal, based on whatever was discussed in the preceding modules. The lynchpin of a research proposal is the protocol, and the key component of a protocol is the study design. However, one must not neglect the other areas, be it the project summary through which one catches the eyes of the reviewer of the proposal, or the background and the literature review, or the aims and objectives of the study. Two critical areas in the "methods" section that cannot be emphasized more are the sampling strategy and a formal estimation of sample size. Without a legitimate sample size, none of the conclusions based on the statistical analysis would be valid. Finally, the ethical parameters of the study should be well understood by the researchers, and that should get reflected in the proposal.

Attention: Reaction Time and Accuracy Reveal Different Mechanisms

Science.gov (United States)

Prinzmetal, William; McCool, Christin; Park, Samuel

2005-01-01

The authors propose that there are 2 different mechanisms whereby spatial cues capture attention. The voluntary mechanism is the strategic allocation of perceptual resources to the location most likely to contain the target. The involuntary mechanism is a reflexive orienting response that occurs even when the spatial cue does not indicate the…

Proposal to Search for Heavy Neutral Leptons at the SPS

CERN Document Server

Bonivento, W.; Dijkstra, H.; Egede, U.; Ferro-Luzzi, M.; Goddard, B.; Golutvin, A.; Gorbunov, D.; Jacobsson, R.; Panman, J.; Patel, M.; Ruchayskiy, O.; Ruf, T.; Serra, N.; Shaposhnikov, M.; Treille, D.; CERN. Geneva. SPS and PS Experiments Committee; SPSC

2013-01-01

A new fixed-target experiment at the CERN SPS accelerator is proposed that will use decays of charm mesons to search for Heavy Neutral Leptons (HNLs), which are right-handed partners of the Standard Model neutrinos. The existence of such particles is strongly motivated by theory, as they can simultaneously explain the baryon asymmetry of the Universe, account for the pattern of neutrino masses and oscillations and provide a Dark Matter candidate. Cosmological constraints on the properties of HNLs now indicate that the majority of the interesting parameter space for such particles was beyond the reach of the previous searches at the PS191, BEBC, CHARM, CCFR and NuTeV experiments. For HNLs with mass below 2 GeV, the proposed experiment will improve on the sensitivity of previous searches by four orders of magnitude and will cover a major fraction of the parameter space favoured by theoretical models. The experiment requires a 400 GeV proton beam from the SPS with a total of 2x10^20 protons on target, achie...

Proposal for modification to forward module design

International Nuclear Information System (INIS)

Lindsay, S.; Taylor, G.

2000-01-01

Concern for the baseline forward module thermal and mechanical viability has led to a proposed modification to the design described here. In view of the tight schedule to finalise the module design, proposed changes are constrained so that calculations and proto typing can be carried out without major changes to the key elements in the module. The following constraints were considered in the process of this work: 1. The hybrid contributes the bulk of the power to be removed from the module. 2. The temperature and its variation across the detector are the key specifications for the cooling design of the module. The hybrid temperature may impact via (secondary) convection and radiation heating, but its operation temperature is not assumed to be the major constraint. 3. The forward hybrid design is well advanced and represents a large effort that should be preserved. 4. The overall design of the module, in particular overall dimensions and placement of precision mounting points is well advanced. Assembly jigs based upon these dimensions are also advanced. The following problems are addressed by the current proposal: 1. The constraint of the small cooling point required to cool both the hybrid and the detector in the baseline is considered a serious limitation demanding high performance in the design and implementation of this contact in the baseline. 2. The small surface area of this contact is critical. Concerns that distortions of the block or relative distortions in the module between the detector and the hybrid, might further reduce the critical effective contact area, as well as possibly causing other problems, give further impetus to the proposed design modification. 3. Thermo-mechanical stress due to the cooling points at both ends of the module. 4. Lack of support of the hybrid near to the cable connectors. 5. Close proximity of the cooling pipe to the front-end electronics and the wire bonds. The proposal involves extending the hybrid substrate with two

Stress corrosion of alloy 600: mechanism proposition

International Nuclear Information System (INIS)

Magnin, T.

1993-01-01

A fissuring model by stress corrosion based on interactions corrosion-plasticity on the fissure top is proposed to describe the generally intergranular bursting of INCONEL 600 in the PWR. The calculation shows, and some observations check experimentally, that a pseudo intergranular cracking bound to the zigzag micro facets formation along the joints may be so that a completely intergranular bursting. This pseudo intergranular mode makes up a signature of the proposed mechanism. It may be suggested that it may exist one continuity mechanism between the trans and intergranular cracking by stress corrosion of ductile cubic centered faces materials. 2 figs

Environment assisted degradation mechanisms in aluminum-lithium alloys

Science.gov (United States)

Gangloff, Richard P.; Stoner, Glenn E.; Swanson, Robert E.

1988-01-01

Section 1 of this report records the progress achieved on NASA-LaRC Grant NAG-1-745 (Environment Assisted Degradation Mechanisms in Al-Li Alloys), and is based on research conducted during the period April 1 to November 30, 1987. A discussion of work proposed for the project's second year is included. Section 2 provides an overview of the need for research on the mechanisms of environmental-mechanical degradation of advanced aerospace alloys based on aluminum and lithium. This research is to provide NASA with the basis necessary to permit metallurgical optimization of alloy performance and engineering design with respect to damage tolerance, long term durability and reliability. Section 3 reports on damage localization mechanisms in aqueous chloride corrosion fatigue of aluminum-lithium alloys. Section 4 reports on progress made on measurements and mechanisms of localized aqueous corrosion in aluminum-lithium alloys. Section 5 provides a detailed technical proposal for research on environmental degradation of Al-Li alloys, and the effect of hydrogen in this.

Proposal of the penalty factor equations considering weld strength over-match

Energy Technology Data Exchange (ETDEWEB)

Kim, Jong Sung [Dept. of Nuclear Engineering, Sejong University, Seoul (Korea, Republic of); Jeong, Jae Wook [Korea Hydro and Nuclear Power Co., Ltd., Gyeongju (Korea, Republic of); Lee, Kang Yong [State Key Laboratory of Structural Analysis for Industrial Equipment, Dept. of Engineering Mechanics, Dalian University of Technology, Dalian (China)

2017-06-15

This paper proposes penalty factor equations that take into consideration the weld strength over-match given in the classified form similar to the revised equations presented in the Code Case N-779 via cyclic elastic-plastic finite element analysis. It was found that the Ke analysis data reflecting elastic follow-up can be consolidated by normalizing the primary-plus-secondary stress intensity ranges excluding the nonlinear thermal stress intensity component, S{sub n} to over-match degree of yield strength, M{sub F}. For the effect of over-match on K{sub n} × K{sub v{sup 1}}, dispersion of the Kn × K{sub v} analysis data can be sharply reduced by dividing total stress intensity range, excluding local thermal stresses, S{sub p-lt} by M{sub F}. Finally, the proposed equations were applied to the weld between the safe end and the piping of a pressurizer surge nozzle in pressurized water reactors in order to calculate a cumulative usage factor. The cumulative usage factor was then compared with those derived by the previous K{sub e} factor equations. The result shows that application of the proposed equations can significantly reduce conservatism of fatigue assessment using the previous K{sub e} factor equations.

Additional comments on 'A proposed method for measuring the electric dipole moment of the neutron using acceleration in an electric field gradient and ultracold neutron interferometry'

CERN Document Server

Lamoreaux, S K

1999-01-01

We have previously (Lamoreaux and Golub, Los Alamos archive (xxx) nucl-ex/9901007vs, Nucl. Instr. and Meth., 433 (1999)) presented an analysis, using classical, semi-classical and quantum mechanical tehniques, of the proposal of Freedman et al., (Nucl. Instr. and Meth., A 396 (1997) 181) to search for the neutron electric dipole moment by the use of acceleration of ultracold neutrons in an inhomogeneous electric field followed by amplification of the resulting displacement by several methods involving spin independent interactions (gravity) or reflection from curved (spin independent) mirrors. Following the appearance of some more recent comments (Peshkin, Los Alamos archive (xxx) nucl-ex/9903012 v2; Dombeck and Ringo, Nucl. Instr. and Meth., A 433 (1999)) it now seems reasonable to publish a revised version of our quantum mechanical treatment (Section 2 B of ) with a more detailed exposition.

Mechanics of oriented electrospun nanofibrous scaffolds for annulus fibrosus tissue engineering.

Science.gov (United States)

Nerurkar, Nandan L; Elliott, Dawn M; Mauck, Robert L

2007-08-01

Engineering a functional replacement for the annulus fibrosus (AF) of the intervertebral disc is contingent upon recapitulation of AF structure, composition, and mechanical properties. In this study, we propose a new paradigm for AF tissue engineering that focuses on the reconstitution of anatomic fiber architecture and uses constitutive modeling to evaluate construct function. A modified electrospinning technique was utilized to generate aligned nanofibrous polymer scaffolds for engineering the basic functional unit of the AF, a single lamella. Scaffolds were tested in uniaxial tension at multiple fiber orientations, demonstrating a nonlinear dependence of modulus on fiber angle that mimicked the nonlinearity and anisotropy of native AF. A homogenization model previously applied to native AF successfully described scaffold mechanical response, and parametric studies demonstrated that nonfibrillar matrix, along with fiber connectivity, are key contributors to tensile mechanics for engineered AF. We demonstrated that AF cells orient themselves along the aligned scaffolds and deposit matrix that contributes to construct mechanics under loading conditions relevant to the in vivo environment. The homogenization model was applied to cell-seeded constructs and provided quantitative measures for the evolution of matrix and interfibrillar interactions. Finally, the model demonstrated that at fiber angles of the AF (28 degrees -44 degrees ), engineered material behaved much like native tissue, suggesting that engineered constructs replicate the physiologic behavior of the single AF lamella. Constitutive modeling provides a powerful tool for analysis of engineered AF neo-tissue and native AF tissue alike, highlighting key mechanical design criteria for functional AF tissue engineering.

Work stressors and partner social undermining: Comparing negative affect and psychological detachment as mechanisms.

Science.gov (United States)

Meier, Laurenz L; Cho, Eunae

2018-05-14

With the mounting evidence that employees' work experiences spill over into the family domain and cross over to family members, it is important to understand the underlying mechanism through which work experiences affect the family domain and what factors may alleviate the adverse impact of work stress. Expanding previous research that mainly focused on the affect-based mechanism (negative affect), the present research investigated a resource-based mechanism (psychological detachment from work) in the relationship linking two work stressors (high workload and workplace incivility) with social undermining toward the partner at home. We also explored the relative strength of the mediating effects of the two mechanisms. In addition, we tested whether relationship satisfaction moderates the proposed effect of detachment on partner undermining. We tested these research questions using two studies with differing designs: a five-wave longitudinal study (N = 470) and a multisource study (N = 131). The results suggest that stressful work experiences affect the family domain via lack of detachment as well as negative affect, that the two pathways have comparable strength, and that high relationship satisfaction mitigates the negative effect of lack of detachment on partner undermining. In sum, this research extends the spillover-crossover model by establishing that poor psychological detachment from work during leisure time is an additional mechanism that links work and family. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Mechanical stability of heat-treated nanoporous anodic alumina subjected to repetitive mechanical deformation

Science.gov (United States)

Bankova, A.; Videkov, V.; Tzaneva, B.; Mitov, M.

2018-03-01

We report studies on the mechanical response and deformation behavior of heat-treated nanoporous anodic alumina using a micro-balance test and experimental test equipment especially designed for this purpose. AAO samples were characterized mechanically by a three-point bending test using a micro-analytical balance. The deformation behavior was studied by repetitive mechanical bending of the AAO membranes using an electronically controlled system. The nanoporous AAO structures were prepared electrochemically from Al sheet substrates using a two-step anodizing technique in oxalic acid followed by heat treatment at 700 °C in air. The morphological study of the aluminum oxide layer after the mechanical tests and mechanical deformation was conducted using scanning electron and optical microscopy, respectively. The experimental results showed that the techniques proposed are simple and accurate; they could, therefore, be combined to constitute a method for mechanical stability assessment of nanostructured AAO films, which are important structural components in the design of MEMS devices and sensors.

Selection of software for mechanical engineering undergraduates

International Nuclear Information System (INIS)

Cheah, C. T.; Yin, C. S.; Halim, T.; Naser, J.; Blicblau, A. S.

2016-01-01

A major problem with the undergraduate mechanical course is the limited exposure of students to software packages coupled with the long learning curve on the existing software packages. This work proposes the use of appropriate software packages for the entire mechanical engineering curriculum to ensure students get sufficient exposure real life design problems. A variety of software packages are highlighted as being suitable for undergraduate work in mechanical engineering, e.g. simultaneous non-linear equations; uncertainty analysis; 3-D modeling software with the FEA; analysis tools for the solution of problems in thermodynamics, fluid mechanics, mechanical system design, and solid mechanics.

Selection of software for mechanical engineering undergraduates

Energy Technology Data Exchange (ETDEWEB)

Cheah, C. T.; Yin, C. S.; Halim, T.; Naser, J.; Blicblau, A. S., E-mail: ablicblau@swin.edu.au [Swinburne University of Technology, Faculty of Science Engineering and Technology, PO Box 218 Hawthorn, Victoria, Australia, 3122 (Australia)

2016-07-12

A major problem with the undergraduate mechanical course is the limited exposure of students to software packages coupled with the long learning curve on the existing software packages. This work proposes the use of appropriate software packages for the entire mechanical engineering curriculum to ensure students get sufficient exposure real life design problems. A variety of software packages are highlighted as being suitable for undergraduate work in mechanical engineering, e.g. simultaneous non-linear equations; uncertainty analysis; 3-D modeling software with the FEA; analysis tools for the solution of problems in thermodynamics, fluid mechanics, mechanical system design, and solid mechanics.

The grant writer's handbook how to write a research proposal and succeed

CERN Document Server

Crawley, Gerard M

2016-01-01

The Grant Writer's Handbook: How to Write a Research Proposal and Succeed provides useful and practical advice on all aspects of proposal writing, including developing proposal ideas, drafting the proposal, dealing with referees, and budgeting. The authors base their advice on many years of experience writing and reviewing proposals in many different countries at various levels of scientific maturity. The book describes the numerous kinds of awards available from funding agencies, in particular large collaborative grants involving a number of investigators, and addresses the practical impact of a grant, which is often required of proposals. In addition, information is provided about selection of reviewers and the mechanics of organizing a research grant competition to give the proposal writer the necessary background information. The book includes key comments from a number of experts and is essential reading for anyone writing a research grant proposal.The Grant Writer's Handbook's companion website, featuri...

Stochastic mechanism of symmetry breaking

International Nuclear Information System (INIS)

Baseyan, H.Z.

1983-01-01

A new symmetry breaking mechanism conditioned by presence of random fields in vacuum is proposed. Massive Yang-Mills fields finally arise, that may be interpreted as ''macroscopic'' manifestation of the ''microscopic'' Yang-Mills massless theory

Medicare depreciation; useful life guidelines--HCFA. Proposed rule.

Science.gov (United States)

1982-09-30

We are proposing to amend Medicare regulations to clarify which useful life guidelines providers of health care services may use to determine the useful life of a depreciable asset for Medicare reimbursement purposes. Current regulations state that providers must utilize HHS useful life guidelines or, if none have been published by HHS, the American Hospital Association (AHA) useful life guidelines of 1973 or IRS guidelines. We are proposing to eliminate the reference to IRS guidelines because those previously acceptable for Medicare purposes are outdated and have been made obsolete by the IRS or by statutory change. We would also delete the specific reference to the 1973 AHA guidelines. In addition, we intend this amendment to clarify that certain tax legislation on accelerated depreciation, recently passed by Congress, does not apply to the Medicare program.

Exploring possible mechanisms of action for the nanotoxicity and protein binding of decorated nanotubes: interpretation of physicochemical properties from optimal QSAR models.

Science.gov (United States)

Esposito, Emilio Xavier; Hopfinger, Anton J; Shao, Chi-Yu; Su, Bo-Han; Chen, Sing-Zuo; Tseng, Yufeng Jane

2015-10-01

Carbon nanotubes have become widely used in a variety of applications including biosensors and drug carriers. Therefore, the issue of carbon nanotube toxicity is increasingly an area of focus and concern. While previous studies have focused on the gross mechanisms of action relating to nanomaterials interacting with biological entities, this study proposes detailed mechanisms of action, relating to nanotoxicity, for a series of decorated (functionalized) carbon nanotube complexes based on previously reported QSAR models. Possible mechanisms of nanotoxicity for six endpoints (bovine serum albumin, carbonic anhydrase, chymotrypsin, hemoglobin along with cell viability and nitrogen oxide production) have been extracted from the corresponding optimized QSAR models. The molecular features relevant to each of the endpoint respective mechanism of action for the decorated nanotubes are also discussed. Based on the molecular information contained within the optimal QSAR models for each nanotoxicity endpoint, either the decorator attached to the nanotube is directly responsible for the expression of a particular activity, irrespective of the decorator's 3D-geometry and independent of the nanotube, or those decorators having structures that place the functional groups of the decorators as far as possible from the nanotube surface most strongly influence the biological activity. These molecular descriptors are further used to hypothesize specific interactions involved in the expression of each of the six biological endpoints. Copyright © 2015 Elsevier Inc. All rights reserved.

Proposal to extract, process and export uranium from Jabiluka orebody No. 2. The Jabiluka proposal - Environmental assessment report

International Nuclear Information System (INIS)

1997-08-01

This report assesses the environmental impact of a proposal by Energy Resources of Australia Ltd (ERA) to establish an underground uranium mine with associated infrastructure at the Jabiluka Prospect, approximately 20 km north of Jabiru in the Northern Territory (NT). In accordance with the Environment Protection (Impact of Proposals) Act 1974 (EPIP Act) the Minister for Resources and Energy designated ERA as proponent in relation to prospective decisions to grant approvals for uranium exports from the Jabiluka mine under Regulation 11 of the Customs (Prohibited Exports) Regulations. The report reviews the draft Environmental Impact Statement (draft EIS), public comments on the draft EIS, and the proponent's responses to these comments in the Supplement to the draft EIS (the draft EIS plus the Supplement constitutes the final EIS). It also relies on information, comments and advice provided by areas within Environment Australia, other relevant Commonwealth agencies, Northern Territory Department of Lands, Planning and Environment (NTDLPE)(through the joint assessment process) and previous studies undertaken in the region

Proposal to extract, process and export uranium from Jabiluka orebody No. 2. The Jabiluka proposal - Environmental assessment report

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-08-01

This report assesses the environmental impact of a proposal by Energy Resources of Australia Ltd (ERA) to establish an underground uranium mine with associated infrastructure at the Jabiluka Prospect, approximately 20 km north of Jabiru in the Northern Territory (NT). In accordance with the Environment Protection (Impact of Proposals) Act 1974 (EPIP Act) the Minister for Resources and Energy designated ERA as proponent in relation to prospective decisions to grant approvals for uranium exports from the Jabiluka mine under Regulation 11 of the Customs (Prohibited Exports) Regulations. The report reviews the draft Environmental Impact Statement (draft EIS), public comments on the draft EIS, and the proponent`s responses to these comments in the Supplement to the draft EIS (the draft EIS plus the Supplement constitutes the final EIS). It also relies on information, comments and advice provided by areas within Environment Australia, other relevant Commonwealth agencies, Northern Territory Department of Lands, Planning and Environment (NTDLPE)(through the joint assessment process) and previous studies undertaken in the region

76 FR 45308 - Self-Regulatory Organizations; The NASDAQ Stock Market LLC; Order Granting Approval of Proposed...

Science.gov (United States)

2011-07-28

...-Regulatory Organizations; The NASDAQ Stock Market LLC; Order Granting Approval of Proposed Rule Change To... change should provide NOM Participants assistance in effectively managing their quotations. \\6\\ 15 U.S.C...,\\2\\ a proposed rule change to adopt a new risk monitor mechanism. The proposed rule change was...

Performance of different colour quality metrics proposed to CIE TC 1-91

OpenAIRE

Bhusal, Pramod; Dangol, Rajendra

2017-01-01

The main aim of the article is to find out the performance of different metrics proposed to CIE TC 1-91. Currently, six different indexes have been proposed to CIE TC 1-91: Colour Quality Scale (CQS), Feeling of Contrast Index (FCI), Memory colour rendering index (MCRI), Preference of skin (PS), Relative gamut area index (RGAI) and Illuminating Engineering society Method for evaluating light source colour rendition (IES TM-30). The evaluation and analysis are based on previously conducted exp...

Unified mechanism of alkali and alkaline earth catalyzed gasification reactions of carbon by CO2 and H2O

Science.gov (United States)

Chen, S.G.; Yang, R.T.

1997-01-01

From molecular orbital calculations, a unified mechanism is proposed for the gasification reactions of graphite by CO2 and H2O, both uncatalyzed and catalyzed by alkali and alkaline earth catalysts. In this mechanism, there are two types of oxygen intermediates that are bonded to the active edge carbon atoms: an in-plane semiquinone type, Cf(O), and an off-plane oxygen bonded to two saturated carbon atoms that are adjacent to the semiquinone species, C(O)Cf(O). The rate-limiting step is the decomposition of these intermediates by breaking the C-C bonds that are connected to Cf(O). A new rate equation is derived for the uncatalyzed reactions, and that for the catalyzed reactions is readily available from the proposed mechanism. The proposed mechanism can account for several unresolved experimental observations: TPD and TK (transient kinetics) desorption results of the catalyzed systems, the similar activation energies for the uncatalyzed and catalyzed reactions, and the relative activities of the alkali and alkaline earth elements. The net charge of the edge carbon active site is substantially changed by gaining electron density from the alkali or alkaline earth element (by forming C-O-M, where M stands for metal). The relative catalytic activities of these elements can be correlated with their abilities of donating electrons and changing the net charge of the edge carbon atom. As shown previously (Chen, S. G.; Yang, R. T. J. Catal. 1993, 141, 102), only clusters of the alkali compounds are active. This derives from the ability of the clusters to dissociate CO2 and H2O to form O atoms and the mobility of the dissociated O atoms facilitated by the clusters.

78 FR 44567 - Proposed Data Collections Submitted for Public Comment and Recommendations

Science.gov (United States)

2013-07-24

...), which have been proven to reduce tractor-rollovers, a leading cause of injury to agricultural workers...-important items were previously developed through review of relevant research studies. CDC proposes to... survey to the respondent organization; 2. Limited respondent perception of the demographic...

Time-dependent reliability sensitivity analysis of motion mechanisms

International Nuclear Information System (INIS)

Wei, Pengfei; Song, Jingwen; Lu, Zhenzhou; Yue, Zhufeng

2016-01-01

Reliability sensitivity analysis aims at identifying the source of structure/mechanism failure, and quantifying the effects of each random source or their distribution parameters on failure probability or reliability. In this paper, the time-dependent parametric reliability sensitivity (PRS) analysis as well as the global reliability sensitivity (GRS) analysis is introduced for the motion mechanisms. The PRS indices are defined as the partial derivatives of the time-dependent reliability w.r.t. the distribution parameters of each random input variable, and they quantify the effect of the small change of each distribution parameter on the time-dependent reliability. The GRS indices are defined for quantifying the individual, interaction and total contributions of the uncertainty in each random input variable to the time-dependent reliability. The envelope function method combined with the first order approximation of the motion error function is introduced for efficiently estimating the time-dependent PRS and GRS indices. Both the time-dependent PRS and GRS analysis techniques can be especially useful for reliability-based design. This significance of the proposed methods as well as the effectiveness of the envelope function method for estimating the time-dependent PRS and GRS indices are demonstrated with a four-bar mechanism and a car rack-and-pinion steering linkage. - Highlights: • Time-dependent parametric reliability sensitivity analysis is presented. • Time-dependent global reliability sensitivity analysis is presented for mechanisms. • The proposed method is especially useful for enhancing the kinematic reliability. • An envelope method is introduced for efficiently implementing the proposed methods. • The proposed method is demonstrated by two real planar mechanisms.

Improved Scheduling Mechanisms for Synchronous Information and Energy Transmission.

Science.gov (United States)

Qin, Danyang; Yang, Songxiang; Zhang, Yan; Ma, Jingya; Ding, Qun

2017-06-09

Wireless energy collecting technology can effectively reduce the network time overhead and prolong the wireless sensor network (WSN) lifetime. However, the traditional energy collecting technology cannot achieve the balance between ergodic channel capacity and average collected energy. In order to solve the problem of the network transmission efficiency and the limited energy of wireless devices, three improved scheduling mechanisms are proposed: improved signal noise ratio (SNR) scheduling mechanism (IS2M), improved N-SNR scheduling mechanism (INS2M) and an improved Equal Throughput scheduling mechanism (IETSM) for different channel conditions to improve the whole network performance. Meanwhile, the average collected energy of single users and the ergodic channel capacity of three scheduling mechanisms can be obtained through the order statistical theory in Rayleig, Ricean, Nakagami- m and Weibull fading channels. It is concluded that the proposed scheduling mechanisms can achieve better balance between energy collection and data transmission, so as to provide a new solution to realize synchronous information and energy transmission for WSNs.

On-Chip Method to Measure Mechanical Characteristics of a Single Cell by Using Moiré Fringe

Directory of Open Access Journals (Sweden)

Hirotaka Sugiura

2015-06-01

Full Text Available We propose a method to characterize the mechanical properties of cells using a robot-integrated microfluidic chip (robochip and microscopy. The microfluidic chip is designed to apply the specified deformations to a single detached cell using an on-chip actuator probe. The reaction force is simultaneously measured using an on-chip force sensor composed of a hollow folded beam and probe structure. In order to measure the cellular characteristics in further detail, a sub-pixel level of resolution of probe position is required. Therefore, we utilize the phase detection of moiré fringe. Using this method, the experimental resolution of the probe position reaches 42 nm. This is approximately ten times smaller than the optical wavelength, which is the limit of sharp imaging with a microscope. Calibration of the force sensor is also important in accurately measuring cellular reaction forces. We calibrated the spring constant from the frequency response, by the proposed sensing method of the probe position. As a representative of mechanical characteristics, we measured the elastic modulus of Madin-Darby Cannie Kidney (MDCK cells. In spite of the rigid spring constant, the resolution and sensitivity were twice that achieved in our previous study. Unique cellular characteristics can be elucidated by the improvements in sensing resolution and accuracy.

Secondary recurrent miscarriage is associated with previous male birth.

LENUS (Irish Health Repository)

Ooi, Poh Veh

2012-01-31

Secondary recurrent miscarriage (RM) is defined as three or more consecutive pregnancy losses after delivery of a viable infant. Previous reports suggest that a firstborn male child is associated with less favourable subsequent reproductive potential, possibly due to maternal immunisation against male-specific minor histocompatibility antigens. In a retrospective cohort study of 85 cases of secondary RM we aimed to determine if secondary RM was associated with (i) gender of previous child, maternal age, or duration of miscarriage history, and (ii) increased risk of pregnancy complications. Fifty-three women (62.0%; 53\\/85) gave birth to a male child prior to RM compared to 32 (38.0%; 32\\/85) who gave birth to a female child (p=0.002). The majority (91.7%; 78\\/85) had uncomplicated, term deliveries and normal birth weight neonates, with one quarter of the women previously delivered by Caesarean section. All had routine RM investigations and 19.0% (16\\/85) had an abnormal result. Fifty-seven women conceived again and 33.3% (19\\/57) miscarried, but there was no significant difference in failure rates between those with a previous male or female child (13\\/32 vs. 6\\/25, p=0.2). When patients with abnormal results were excluded, or when women with only one previous child were considered, there was still no difference in these rates. A previous male birth may be associated with an increased risk of secondary RM but numbers preclude concluding whether this increases recurrence risk. The suggested association with previous male birth provides a basis for further investigations at a molecular level.

Secondary recurrent miscarriage is associated with previous male birth.

LENUS (Irish Health Repository)

Ooi, Poh Veh

2011-01-01

Secondary recurrent miscarriage (RM) is defined as three or more consecutive pregnancy losses after delivery of a viable infant. Previous reports suggest that a firstborn male child is associated with less favourable subsequent reproductive potential, possibly due to maternal immunisation against male-specific minor histocompatibility antigens. In a retrospective cohort study of 85 cases of secondary RM we aimed to determine if secondary RM was associated with (i) gender of previous child, maternal age, or duration of miscarriage history, and (ii) increased risk of pregnancy complications. Fifty-three women (62.0%; 53\\/85) gave birth to a male child prior to RM compared to 32 (38.0%; 32\\/85) who gave birth to a female child (p=0.002). The majority (91.7%; 78\\/85) had uncomplicated, term deliveries and normal birth weight neonates, with one quarter of the women previously delivered by Caesarean section. All had routine RM investigations and 19.0% (16\\/85) had an abnormal result. Fifty-seven women conceived again and 33.3% (19\\/57) miscarried, but there was no significant difference in failure rates between those with a previous male or female child (13\\/32 vs. 6\\/25, p=0.2). When patients with abnormal results were excluded, or when women with only one previous child were considered, there was still no difference in these rates. A previous male birth may be associated with an increased risk of secondary RM but numbers preclude concluding whether this increases recurrence risk. The suggested association with previous male birth provides a basis for further investigations at a molecular level.

Synoptic-scale analysis of mechanisms driving surface chlorophyll dynamics in the North Atlantic

Directory of Open Access Journals (Sweden)

A. S. A. Ferreira

2015-06-01

Full Text Available Several hypotheses have been proposed for the onset of the spring phytoplankton bloom in the North Atlantic. Our main objective is to examine which bottom-up processes can best predict the annual increase in surface phytoplankton concentration in the North Atlantic by applying novel phenology algorithms to ocean colour data. We construct indicator fields and time series which, in various combinations, provide models consistent with the principle dynamics previously proposed. Using a multimodel inference approach, we investigate the evidence supporting these models and how it varies in space. We show that, in terms of bottom-up processes alone, there is a dominant physical mechanism, namely mixed-layer shoaling, that best predicts the interannual variation in the initial increase in surface chlorophyll across large sectors of the North Atlantic. We further show that different regions are governed by different physical phenomena and that wind-driven mixing is a common component, with either heat flux or light as triggers. We believe these findings to be relevant to the ongoing discussion on North Atlantic bloom onset.

Water Diffusion Mechanism in Carbon Nanotube and Polyamide Nanocomposite Reverse Osmosis Membranes: A Possible Percolation-Hopping Mechanism

Science.gov (United States)

Araki, Takumi; Cruz-Silva, Rodolfo; Tejima, Syogo; Ortiz-Medina, Josue; Morelos-Gomez, Aaron; Takeuchi, Kenji; Hayashi, Takuya; Terrones, Mauricio; Endo, Morinobu

2018-02-01

This paper is a contribution to the Physical Review Applied collection in memory of Mildred S. Dresselhaus. The mechanism of water diffusion across reverse osmosis nanocomposite membranes made of carbon nanotubes (CNTs) and aromatic polyamide is not completely understood despite its high potential for desalination applications. While most of the groups have proposed that superflow inside the CNT might positively impact the water flow across membranes, here we show theoretical evidence that this is not likely the case in composite membranes because CNTs are usually oriented parallel to the membrane surface, not to mention that sometimes the nanotube cores are occluded. Instead, we propose an oriented diffusion mechanism that explains the high water permeation by decreasing the diffusion path of water molecules across the membranes, even in the presence of CNTs that behave as impermeable objects. Finally, we provide a comprehensive description of the molecular dynamics occurring in water desalination membranes by considering the bond polarizability caused by dynamic charge transfer and explore the use of molecular-dynamics-derived stochastic diffusion simulations. The proposed water diffusion mechanism offers an alternative and most likely explanation for the high permeation phenomena observed in CNTs and PA nanocomposite membranes, and its understanding can be helpful to design the next generation of reverse osmosis desalination membranes.

Meta-analysis reveals host-dependent nitrogen recycling as a mechanism of symbiont control in Aiptasia

KAUST Repository

Cui, Guoxin

2018-02-22

The metabolic symbiosis with photosynthetic algae of the genus Symbiodinium allows corals to thrive in the oligotrophic environments of tropical seas. Many aspects of this relationship have been investigated using transcriptomic analyses in the emerging model organism Aiptasia. However, previous studies identified thousands of putatively symbiosis-related genes, making it difficult to disentangle symbiosis-induced responses from undesired experimental parameters. Using a meta-analysis approach, we identified a core set of 731 high-confidence symbiosis-associated genes that reveal host-dependent recycling of waste ammonium and amino acid synthesis as central processes in this relationship. Combining transcriptomic and metabolomic analyses, we show that symbiont-derived carbon enables host recycling of ammonium into nonessential amino acids. We propose that this provides a regulatory mechanism to control symbiont growth through a carbon-dependent negative feedback of nitrogen availability to the symbiont. The dependence of this mechanism on symbiont-derived carbon highlights the susceptibility of this symbiosis to changes in carbon translocation, as imposed by environmental stress.

75 FR 54654 - Agency Information Collection Activities; Proposals, Submissions, and Approvals

Science.gov (United States)

2010-09-08

... appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of.... Type of Review: Extension without change of a previously approved collection. Title of Collection.... Affected Public: Businesses or other for-profits, Federal Government. Total Estimated Number of Responses...

Variational principle in quantum mechanics

International Nuclear Information System (INIS)

Popiez, L.

1986-01-01

The variational principle in a standard, path integral formulation of quantum mechanics (as proposed by Dirac and Feynman) appears only in the context of a classical limit n to 0 and manifests itself through the method of abstract stationary phase. Symbolically it means that a probability amplitude averaged over trajectories denotes a classical evolution operator for points in a configuration space. There exists, however, the formulation of quantum dynamics in which variational priniple is one of basic postulates. It is explained that the translation between stochastic and quantum mechanics in this case can be understood as in Nelson's stochastic mechanics

Reoperative sentinel lymph node biopsy after previous mastectomy.

Science.gov (United States)

Karam, Amer; Stempel, Michelle; Cody, Hiram S; Port, Elisa R

2008-10-01

Sentinel lymph node (SLN) biopsy is the standard of care for axillary staging in breast cancer, but many clinical scenarios questioning the validity of SLN biopsy remain. Here we describe our experience with reoperative-SLN (re-SLN) biopsy after previous mastectomy. Review of the SLN database from September 1996 to December 2007 yielded 20 procedures done in the setting of previous mastectomy. SLN biopsy was performed using radioisotope with or without blue dye injection superior to the mastectomy incision, in the skin flap in all patients. In 17 of 20 patients (85%), re-SLN biopsy was performed for local or regional recurrence after mastectomy. Re-SLN biopsy was successful in 13 of 20 patients (65%) after previous mastectomy. Of the 13 patients, 2 had positive re-SLN, and completion axillary dissection was performed, with 1 having additional positive nodes. In the 11 patients with negative re-SLN, 2 patients underwent completion axillary dissection demonstrating additional negative nodes. One patient with a negative re-SLN experienced chest wall recurrence combined with axillary recurrence 11 months after re-SLN biopsy. All others remained free of local or axillary recurrence. Re-SLN biopsy was unsuccessful in 7 of 20 patients (35%). In three of seven patients, axillary dissection was performed, yielding positive nodes in two of the three. The remaining four of seven patients all had previous modified radical mastectomy, so underwent no additional axillary surgery. In this small series, re-SLN was successful after previous mastectomy, and this procedure may play some role when axillary staging is warranted after mastectomy.

A quantum mechanics/molecular mechanics study on the hydrolysis mechanism of New Delhi metallo-β-lactamase-1.

Science.gov (United States)

Zhu, Kongkai; Lu, Junyan; Liang, Zhongjie; Kong, Xiangqian; Ye, Fei; Jin, Lu; Geng, Heji; Chen, Yong; Zheng, Mingyue; Jiang, Hualiang; Li, Jun-Qian; Luo, Cheng

2013-03-01

New Delhi metallo-β-lactamase-1 (NDM-1) has emerged as a major global threat to human health for its rapid rate of dissemination and ability to make pathogenic microbes resistant to almost all known β-lactam antibiotics. In addition, effective NDM-1 inhibitors have not been identified to date. In spite of the plethora of structural and kinetic data available, the accurate molecular characteristics of and details on the enzymatic reaction of NDM-1 hydrolyzing β-lactam antibiotics remain incompletely understood. In this study, a combined computational approach including molecular docking, molecular dynamics simulations and quantum mechanics/molecular mechanics calculations was performed to characterize the catalytic mechanism of meropenem catalyzed by NDM-1. The quantum mechanics/molecular mechanics results indicate that the ionized D124 is beneficial to the cleavage of the C-N bond within the β-lactam ring. Meanwhile, it is energetically favorable to form an intermediate if no water molecule coordinates to Zn2. Moreover, according to the molecular dynamics results, the conserved residue K211 plays a pivotal role in substrate binding and catalysis, which is quite consistent with previous mutagenesis data. Our study provides detailed insights into the catalytic mechanism of NDM-1 hydrolyzing meropenem β-lactam antibiotics and offers clues for the discovery of new antibiotics against NDM-1 positive strains in clinical studies.

Quality-Aware Incentive Mechanism for Mobile Crowd Sensing

Directory of Open Access Journals (Sweden)

Ling-Yun Jiang

2017-01-01

Full Text Available Mobile crowd sensing (MCS is a novel sensing paradigm which can sense human-centered daily activities and the surrounding environment. The impact of mobility and selfishness of participants on the data reliability cannot be ignored in most mobile crowd sensing systems. To address this issue, we present a universal system model based on the reverse auction framework and formulate the problem as the Multiple Quality Multiple User Selection (MQMUS problem. The quality-aware incentive mechanism (QAIM is proposed to meet the quality requirement of data reliability. We demonstrate that the proposed incentive mechanism achieves the properties of computational efficiency, individual rationality, and truthfulness. And meanwhile, we evaluate the performance and validate the theoretical properties of our incentive mechanism through extensive simulation experiments.

77 FR 70176 - Previous Participation Certification

Science.gov (United States)

2012-11-23

... participants' previous participation in government programs and ensure that the past record is acceptable prior... information is designed to be 100 percent automated and digital submission of all data and certifications is... government programs and ensure that the past record is acceptable prior to granting approval to participate...

Experimental investigation of Popper’s proposed ghost-diffraction experiment

Science.gov (United States)

Bolduc, Eliot; Karimi, Ebrahim; Piché, Kevin; Leach, Jonathan; Boyd, Robert W.

2017-10-01

In an effort to challenge the Copenhagen interpretation of quantum mechanics, Karl Popper proposed an experiment involving spatially separated entangled particles. In this experiment, one of the particles passes through a very narrow slit, and thereby its position becomes well-defined. This particle therefore diffracts into a large divergence angle; this effect can be understood as a consequence of the Heisenberg uncertainty principle. Popper further argued that its entangled partner would become comparably localized in position, and that, according to his understanding of the Copenhagen interpretation of quantum mechanics, the ‘mere knowledge’ of the position of this particle would cause it also to diffract into a large divergence angle. Popper recognized that such behavior could violate the principle of causality in that the slit could be removed and the partner particle would be expected to respond instantaneously. Popper thus concluded that it was most likely the case that, in an actual experiment, the partner photon would not undergo increased diffractive spreading and thus that the Copenhagen interpretation is incorrect. Here, we report and analyze the results of an implementation of Popper’s proposal. We find that the partner beam does not undergo increased diffractive spreading. Our work helps to clarify the issues raised in Popper’s proposal, and it provides further insight into the nature of entanglement and its relation to the uncertainty principle as applied to correlated particles.

Efficient Nash Equilibrium Resource Allocation Based on Game Theory Mechanism in Cloud Computing by Using Auction.

Science.gov (United States)

Nezarat, Amin; Dastghaibifard, G H

2015-01-01

One of the most complex issues in the cloud computing environment is the problem of resource allocation so that, on one hand, the cloud provider expects the most profitability and, on the other hand, users also expect to have the best resources at their disposal considering the budget constraints and time. In most previous work conducted, heuristic and evolutionary approaches have been used to solve this problem. Nevertheless, since the nature of this environment is based on economic methods, using such methods can decrease response time and reducing the complexity of the problem. In this paper, an auction-based method is proposed which determines the auction winner by applying game theory mechanism and holding a repetitive game with incomplete information in a non-cooperative environment. In this method, users calculate suitable price bid with their objective function during several round and repetitions and send it to the auctioneer; and the auctioneer chooses the winning player based the suggested utility function. In the proposed method, the end point of the game is the Nash equilibrium point where players are no longer inclined to alter their bid for that resource and the final bid also satisfies the auctioneer's utility function. To prove the response space convexity, the Lagrange method is used and the proposed model is simulated in the cloudsim and the results are compared with previous work. At the end, it is concluded that this method converges to a response in a shorter time, provides the lowest service level agreement violations and the most utility to the provider.

An Approach to Implementing A Threshold Adjusting Mechanism in Very Complex Negotiations : A Preliminary Result

OpenAIRE

Fujita, Katsuhide; Ito, Takayuki; Hattori, Hiromitsu; Klein, Mark

2007-01-01

In this paper, we propose a threshold adjusting mechanism in very complex negotiations among software agents. The proposed mechanism can facilitate agents to reach an agreement while keeping their private information as much as possible. Multi-issue negotiation protocols have been studied widely and represent a promising field since most negotiation problems in the real world involve interdependent multiple issues. We have proposed negotiation protocols where a bidding-based mechanism is used...

A Cross-Layer Cooperation Mechanism of Wireless Networks Based on Game Theory

OpenAIRE

Chunsheng, Cui; Yongjian, Yang; Liping, Huang

2014-01-01

To meet the wireless network congestion control problem, we give a definition of congestion degree classification and propose a mechanism of directed cooperative path net, guided by the wireless network’s cross-layer design methods and node cooperation principles. Considering the virtual collision and “starved” phenomenon in congested networks, the QRD mechanism and channel competition mechanism QPCG are proposed, with introducing the game theory into the cross-layer design. Simulation result...

Transferring Data from Smartwatch to Smartphone through Mechanical Wave Propagation

Directory of Open Access Journals (Sweden)

Seung-Chan Kim

2015-08-01

Full Text Available Inspired by the mechanisms of bone conduction transmission, we present a novel sensor and actuation system that enables a smartwatch to securely communicate with a peripheral touch device, such as a smartphone. Our system regards hand structures as a mechanical waveguide that transmits particular signals through mechanical waves. As a signal, we used high-frequency vibrations (18.0–20.0 kHz so that users cannot sense the signals either tactually or audibly. To this end, we adopted a commercial surface transducer, which is originally developed as a bone-conduction actuator, for mechanical signal generation. At the receiver side, a piezoelement was adopted for picking up the transferred mechanical signals. Experimental results have shown that the proposed system can successfully transfer data using mechanical waves. We also validate dual-frequency actuations under which high-frequency signals (18.0–20.0 kHz are generated along with low-frequency (up to 250 Hz haptic vibrations. The proposed method has advantages in terms of security in that it does not reveal the signals outside the body, meaning that it is not possible for attackers to eavesdrop on the signals. To further illustrate the possible application spaces, we conclude with explorations of the proposed approach.

Transferring Data from Smartwatch to Smartphone through Mechanical Wave Propagation.

Science.gov (United States)

Kim, Seung-Chan; Lim, Soo-Chul

2015-08-28

Inspired by the mechanisms of bone conduction transmission, we present a novel sensor and actuation system that enables a smartwatch to securely communicate with a peripheral touch device, such as a smartphone. Our system regards hand structures as a mechanical waveguide that transmits particular signals through mechanical waves. As a signal, we used high-frequency vibrations (18.0-20.0 kHz) so that users cannot sense the signals either tactually or audibly. To this end, we adopted a commercial surface transducer, which is originally developed as a bone-conduction actuator, for mechanical signal generation. At the receiver side, a piezoelement was adopted for picking up the transferred mechanical signals. Experimental results have shown that the proposed system can successfully transfer data using mechanical waves. We also validate dual-frequency actuations under which high-frequency signals (18.0-20.0 kHz) are generated along with low-frequency (up to 250 Hz) haptic vibrations. The proposed method has advantages in terms of security in that it does not reveal the signals outside the body, meaning that it is not possible for attackers to eavesdrop on the signals. To further illustrate the possible application spaces, we conclude with explorations of the proposed approach.

An Effective Mechanism for Virtual Machine Placement using Aco in IAAS Cloud

Science.gov (United States)

Shenbaga Moorthy, Rajalakshmi; Fareentaj, U.; Divya, T. K.

2017-08-01

Cloud computing provides an effective way to dynamically provide numerous resources to meet customer demands. A major challenging problem for cloud providers is designing efficient mechanisms for optimal virtual machine Placement (OVMP). Such mechanisms enable the cloud providers to effectively utilize their available resources and obtain higher profits. In order to provide appropriate resources to the clients an optimal virtual machine placement algorithm is proposed. Virtual machine placement is NP-Hard problem. Such NP-Hard problem can be solved using heuristic algorithm. In this paper, Ant Colony Optimization based virtual machine placement is proposed. Our proposed system focuses on minimizing the cost spending in each plan for hosting virtual machines in a multiple cloud provider environment and the response time of each cloud provider is monitored periodically, in such a way to minimize delay in providing the resources to the users. The performance of the proposed algorithm is compared with greedy mechanism. The proposed algorithm is simulated in Eclipse IDE. The results clearly show that the proposed algorithm minimizes the cost, response time and also number of migrations.

Estimated conditional score function for missing mechanism model with nonignorable nonresponse

Institute of Scientific and Technical Information of China (English)

CUI Xia; ZHOU Yong

2017-01-01

Missing data mechanism often depends on the values of the responses,which leads to nonignorable nonresponses.In such a situation,inference based on approaches that ignore the missing data mechanism could not be valid.A crucial step is to model the nature of missingness.We specify a parametric model for missingness mechanism,and then propose a conditional score function approach for estimation.This approach imputes the score function by taking the conditional expectation of the score function for the missing data given the available information.Inference procedure is then followed by replacing unknown terms with the related nonparametric estimators based on the observed data.The proposed score function does not suffer from the non-identifiability problem,and the proposed estimator is shown to be consistent and asymptotically normal.We also construct a confidence region for the parameter of interest using empirical likelihood method.Simulation studies demonstrate that the proposed inference procedure performs well in many settings.We apply the proposed method to a data set from research in a growth hormone and exercise intervention study.

Factors controlling alkalisalt deposition in recovery boiler- release mechanisms

Energy Technology Data Exchange (ETDEWEB)

McKeough, P.; Kylloenen, H.; Kurkela, M. [VTT Energy, Espoo (Finland). Process Technology Group

1996-12-01

As part of a cooperative effort to develop a model to describe the behaviour of inorganic compounds in kraft recovery boilers, an experimental investigation of the release of sulphur during black liquor pyrolysis has been undertaken. Previous to these studies, the mechanisms of sulphur release and the reasons for the observed effects of process conditions on sulphur release were very poorly understood. On the basis of the experimental results, the main reactions leading to sulphur release have been elucidated with a fair degree of certainty. Logical explanations for the variations of sulphur release with temperature and with liquor solids content have been proposed. The influence of pressure has been investigated in order to gain insights into the effects of mass transfer on the sulphur-release rate. In the near future, the research will be aimed at generating the kinetic data necessary for modelling the release of sulphur in the recovery furnace. (author)

Concept of consciousness in the context of quantum mechanics

International Nuclear Information System (INIS)

Menskii, Mikhail B

2005-01-01

Conceptual problems of the quantum theory of measurement are considered, which are embodied in well-known paradoxes and in Bell's inequalities. Arguments are advanced in favor of the viewpoint that these problems may hardly be solved without direct inclusion of the observer's consciousness in the theoretical description of a quantum measurement. Discussed in this connection is the so-called many-worlds interpretation of quantum mechanics proposed by Everett, as is the extension of Everett's concept, which consists in the assumption that separating the quantum state components corresponding to alternative measurements is not only associated with the observer's consciousness but is completely identified with it. This approach is shown to open up qualitatively new avenues for the unification of physics and psychology and, more broadly, of the sciences and the humanities. This may lead to an extension of the theory of consciousness and shed light on significant and previously misunderstood phenomena in the sphere of consciousness. (reviews of topical problems)

Development and validation of a reduced combined biodiesel–diesel reaction mechanism

DEFF Research Database (Denmark)

Ng, Hoon Kiat; Gan, Suyin; Ng, Jo-Han

2013-01-01

In this study, a compact combined biodiesel–diesel (CBD) reaction mechanism for diesel engine simulations is proposed through the combination of three component mechanisms using a chemical class-based approach. The proposed mechanism comprises the reaction mechanisms of methyl crotonate (MC...... to characterise the combustion of fossil diesel. Here, the MC and MB mechanisms are reduced before integrating with a compact n-heptane mechanism. CHEMKIN-PRO is used as the solver for the zero-dimensional, closed homogenous reactor with a constant volume in this study. In the first phase, the mechanisms of MC...... ranging from initial temperatures of 750–1350 K, pressures of 40–60 bar and equivalence ratios of 0.4–1.5. The mechanism is generally found to accurately predict the timing and duration of ID for the combustion of each surrogate fuel. This model is also shown to be feasible for use with multidimensional...

The Proposed Heating and Cooling System in the CH2 Building and Its Impact on Occupant Productivity

Directory of Open Access Journals (Sweden)

Lu Aye

2012-11-01

Full Text Available Melbourne's climatic conditions demand that its buildings require both heating and cooling systems. In a multi-storey office building , however, cooling requirements will dominate. How the internal space is cooled and ventilation air is delivered will significantly impact on occupant comfort. This paper discusses the heating and cooling systems proposed for the CH2building. The paper critiques the proposed systems against previous experience, both internationally and in Australia. While the heating system employs proven technologies, less established techniques are proposed for the cooling system. Air movement in the shower towers, for example, is to be naturally induced and this has not always been successful elsewhere. Phase change material for storage of "coolth" does not appear to have been demonstrated previously in a commercial building, so the effectiveness of the proposed system is uncertain. A conventional absorption chiller backs up the untried elements of the cooling system, so that ultimately occupant comfort should not be compromised .

Mechanism of the Enhancement of the Bohr Effect in Mammalian Hemoglobins by Diphosphoglycerate

Science.gov (United States)

Riggs, Austen

1971-01-01

The number of protons released from several mammalian hemoglobins as a consequence of oxygenation is greater in the presence of low concentrations of 2,3-diphosphoglycerate than in its absence. A mechanism for this enhancement of proton release is proposed. The basis of this mechanism is that 2,3-diphosphoglycerate binds primarily between the protonated α-NH2 terminal groups of the two β chains in deoxyhemoglobin. This binding will shift the ionization equilibria in favor of the protonation of the deoxyhemoglobin. Partial release of 2,3-diphosphoglycerate upon oxygenation of the hemoglobin is then accompanied by a release of protons. The apparent enthalpy of diphosphoglycerate binding appears to be close to zero. The previously reported temperature dependence appears to be due entirely to the associated protonation reaction. If only a single diphosphoglycerate binding site is assumed, the intrinsic association constant is estimated to be 3.9 × 105 M-1 for deoxyhemoglobin and 1.05 × 104 M-1 for oxyhemoglobin at 20°C in 0.1 M NaCl. PMID:5289365

Pyridine-pyrimidine amides that prevent HGF-induced epithelial scattering by two distinct mechanisms.

Science.gov (United States)

Siddiqui-Jain, Adam; Hoj, Jacob P; Hargiss, J Blade; Hoj, Taylor H; Payne, Carter J; Ritchie, Collin A; Herron, Steven R; Quinn, Colette; Schuler, Jeffrey T; Hansen, Marc D H

2017-09-01

Stimulation of cultured epithelial cells with scatter factor/hepatocyte growth factor (HGF) results in individual cells detaching and assuming a migratory and invasive phenotype. Epithelial scattering recapitulates cancer progression and studies have implicated HGF signaling as a driver of cancer metastasis. Inhibitors of HGF signaling have been proposed to act as anti-cancer agents. We previously screened a small molecule library for compounds that block HGF-induced epithelial scattering. Most hits identified in this screen exhibit anti-mitotic properties. Here we assess the biological mechanism of a compound that blocks HGF-induced scattering with limited anti-mitotic activity. Analogs of this compound have one of two distinct activities: inhibiting either cell migration or cell proliferation with cell cycle arrest in G2/M. Each activity bears unique structure-activity relationships. The mechanism of action of anti-mitotic compounds is by inhibition of microtubule polymerization; these compounds entropically and enthalpically bind tubulin in the colchicine binding site, generating a conformational change in the tubulin dimer. Copyright © 2017 Elsevier Ltd. All rights reserved.

Mechanism of the enhancement of the Bohr effect in mammalian hemoglobins by diphosphoglycerate.

Science.gov (United States)

Riggs, A

1971-09-01

The number of protons released from several mammalian hemoglobins as a consequence of oxygenation is greater in the presence of low concentrations of 2,3-diphosphoglycerate than in its absence. A mechanism for this enhancement of proton release is proposed. The basis of this mechanism is that 2,3-diphosphoglycerate binds primarily between the protonated alpha-NH(2) terminal groups of the two beta chains in deoxyhemoglobin. This binding will shift the ionization equilibria in favor of the protonation of the deoxyhemoglobin. Partial release of 2,3-diphosphoglycerate upon oxygenation of the hemoglobin is then accompanied by a release of protons. The apparent enthalpy of diphosphoglycerate binding appears to be close to zero. The previously reported temperature dependence appears to be due entirely to the associated protonation reaction. If only a single diphosphoglycerate binding site is assumed, the intrinsic association constant is estimated to be 3.9 x 10(5) M(-1) for deoxyhemoglobin and 1.05 x 10(4) M(-1) for oxyhemoglobin at 20 degrees C in 0.1 M NaCl.

[Evaluation of new and emerging health technologies. Proposal for classification].

Science.gov (United States)

Prados-Torres, J D; Vidal-España, F; Barnestein-Fonseca, P; Gallo-García, C; Irastorza-Aldasoro, A; Leiva-Fernández, F

2011-01-01

Review and develop a proposal for the classification of health technologies (HT) evaluated by the Health Technology Assessment Agencies (HTAA). Peer review of AETS of the previous proposed classification of HT. Analysis of their input and suggestions for amendments. Construction of a new classification. Pilot study with physicians. Andalusian Public Health System. Spanish HTAA. Experts from HTAA. Tutors of family medicine residents. HT Update classification previously made by the research team. Peer review by Spanish HTAA. Qualitative and quantitative analysis of responses. Construction of a new and pilot study based on 12 evaluation reports of the HTAA. We obtained 11 thematic categories that are classified into 6 major head groups: 1, prevention technology; 2, diagnostic technology; 3, therapeutic technologies; 4, diagnostic and therapeutic technologies; 5, organizational technology, and 6, knowledge management and quality of care. In the pilot there was a good concordance in the classification of 8 of the 12 reports reviewed by physicians. Experts agree on 11 thematic categories of HT. A new classification of HT with double entry (Nature and purpose of HT) is proposed. APPLICABILITY: According to experts, the classification of the work of the HTAA may represent a useful tool to transfer and manage knowledge. Moreover, an adequate classification of the HTAA reports would help clinicians and other potential users to locate them and this can facilitate their dissemination. Copyright © 2010 SECA. Published by Elsevier Espana. All rights reserved.

Evaluating the reliability of multi-body mechanisms: A method considering the uncertainties of dynamic performance

International Nuclear Information System (INIS)

Wu, Jianing; Yan, Shaoze; Zuo, Ming J.

2016-01-01

Mechanism reliability is defined as the ability of a certain mechanism to maintain output accuracy under specified conditions. Mechanism reliability is generally assessed by the classical direct probability method (DPM) derived from the first order second moment (FOSM) method. The DPM relies strongly on the analytical form of the dynamic solution so it is not applicable to multi-body mechanisms that have only numerical solutions. In this paper, an indirect probability model (IPM) is proposed for mechanism reliability evaluation of multi-body mechanisms. IPM combines the dynamic equation, degradation function and Kaplan–Meier estimator to evaluate mechanism reliability comprehensively. Furthermore, to reduce the amount of computation in practical applications, the IPM is simplified into the indirect probability step model (IPSM). A case study of a crank–slider mechanism with clearance is investigated. Results show that relative errors between the theoretical and experimental results of mechanism reliability are less than 5%, demonstrating the effectiveness of the proposed method. - Highlights: • An indirect probability model (IPM) is proposed for mechanism reliability evaluation. • The dynamic equation, degradation function and Kaplan–Meier estimator are used. • Then the simplified form of indirect probability model is proposed. • The experimental results agree well with the predicted results.

Authenticity in the Teaching of ESP: An Evaluation Proposal

Directory of Open Access Journals (Sweden)

María Luisa Pérez Cañado

2015-10-01

Full Text Available Although authentic materials are a very rich source for the selection of teaching materials in the field of ESP (English for Specific Purposes in general and of Business English in particular, the ultimate purpose should be authentic communication between the text (oral or written and its recipient as a result of the interpretation brought to the text by the latter. To speak of authenticity implies therefore a dual focus: that of “authentic material” and that of “authenticity”. The literature in the field is vast and deserves an in-depth analysis, as in many cases the previous terms are treated as synonyms. Thus, an original proposal for the evaluation of authenticity is called for, an aspect rarely considered in the evaluation of teaching materials. This proposal will build upon a review of the literature on authenticity, as well as on the most important proposals for the evaluation of teaching materials. The proposal set forth in this paper is completed with a checklist which integrates the consideration of the inherent characteristics in the material being evaluated, together with the teacher’s view on this score.

On the proposed second law paradox in a nonzero floating potential

International Nuclear Information System (INIS)

Cruden, Brett A.

2001-01-01

A second law paradox was previously proposed for a plasma contained within an infinite blackbody. The proposed second law paradox was dependent on the plasma having a nonzero floating potential [D. P. Sheehan and J. D. Means, Phys. Plasmas 5, 2469 (1998)]. This work demonstrates that a nonzero floating potential is indicative of some energy contained within the plasma that can be withdrawn from the plasma without violation of the second law. Furthermore, it is shown from the probe theory that the plasma in this hypothetical configuration must have a floating potential of zero at steady state

Assessment of the proposed decontamination and waste treatment facility at LLNL

International Nuclear Information System (INIS)

Cohen, J.J.

1987-01-01

To provide a centralized decontamination and waste treatment facility (DWTF) at LLNL, the construction of a new installation has been planned. Objectives for this new facility were to replace obsolete, structurally and environmentally sub-marginal liquid and solid waste process facilities and decontamination facility and to bring these facilities into compliance with existing federal, state and local regulations as well as DOE orders. In a previous study, SAIC conducted a preliminary review and evaluation of existing facilities at LLNL and cost effectiveness of the proposed DWTF. This document reports on a detailed review of specific aspects of the proposed DWTF

Fluid mechanics fundamentals and applications

CERN Document Server

Cengel, Yunus

2013-01-01

Cengel and Cimbala's Fluid Mechanics Fundamentals and Applications, communicates directly with tomorrow's engineers in a simple yet precise manner. The text covers the basic principles and equations of fluid mechanics in the context of numerous and diverse real-world engineering examples. The text helps students develop an intuitive understanding of fluid mechanics by emphasizing the physics, using figures, numerous photographs and visual aids to reinforce the physics. The highly visual approach enhances the learning of Fluid mechanics by students. This text distinguishes itself from others by the way the material is presented - in a progressive order from simple to more difficult, building each chapter upon foundations laid down in previous chapters. In this way, even the traditionally challenging aspects of fluid mechanics can be learned effectively. McGraw-Hill is also proud to offer ConnectPlus powered by Maple with the third edition of Cengel/Cimbabla, Fluid Mechanics. This innovative and powerful new sy...

[Prevalence of previously diagnosed diabetes mellitus in Mexico.

Science.gov (United States)

Rojas-Martínez, Rosalba; Basto-Abreu, Ana; Aguilar-Salinas, Carlos A; Zárate-Rojas, Emiliano; Villalpando, Salvador; Barrientos-Gutiérrez, Tonatiuh

2018-01-01

To compare the prevalence of previously diagnosed diabetes in 2016 with previous national surveys and to describe treatment and its complications. Mexico's national surveys Ensa 2000, Ensanut 2006, 2012 and 2016 were used. For 2016, logistic regression models and measures of central tendency and dispersion were obtained. The prevalence of previously diagnosed diabetes in 2016 was 9.4%. The increase of 2.2% relative to 2012 was not significant and only observed in patients older than 60 years. While preventive measures have increased, the access to medical treatment and lifestyle has not changed. The treatment has been modified, with an increase in insulin and decrease in hypoglycaemic agents. Population aging, lack of screening actions and the increase in diabetes complications will lead to an increase on the burden of disease. Policy measures targeting primary and secondary prevention of diabetes are crucial.

Modeling and optimization of a novel two-axis mirror-scanning mechanism driven by piezoelectric actuators

International Nuclear Information System (INIS)

Jing, Zijian; Xu, Minglong; Feng, Bo

2015-01-01

Mirror-scanning mechanisms are a key component in optical systems for diverse applications. However, the applications of existing piezoelectric scanners are limited due to their small angular travels. To overcome this problem, a novel two-axis mirror-scanning mechanism, which consists of a two-axis tip-tilt flexure mechanism and a set of piezoelectric actuators, is proposed in this paper. The focus of this research is on the design, theoretical modeling, and optimization of the piezoelectric-driven mechanism, with the goal of achieving large angular travels in a compact size. The design of the two-axis tip-tilt flexure mechanism is based on two nonuniform beams, which translate the limited linear output displacements of the piezoelectric actuators into large output angles. To exactly predict the angular travels, we built a voltage-angle model that characterizes the relationship between the input voltages to the piezoelectric actuators and the output angles of the piezoelectric-driven mechanism. Using this analytical model, the optimization is performed to improve the angular travels. A prototype of the mirror-scanning mechanism is fabricated based on the optimization results, and experiments are implemented to test the two-axis output angles. The experimental result shows that the angular travels of the scanner achieve more than 50 mrad, and the error between the analytical model and the experiment is about 11%. This error is much smaller than the error for the model built using the previous method because the influence of the stiffness of the mechanical structure on the deformation of the piezoelectric stack is considered in the voltage-angle model. (paper)

Mechanisms controlling the impact of multi-year drought on mountain hydrology.

Science.gov (United States)

Bales, Roger C; Goulden, Michael L; Hunsaker, Carolyn T; Conklin, Martha H; Hartsough, Peter C; O'Geen, Anthony T; Hopmans, Jan W; Safeeq, Mohammad

2018-01-12

Mountain runoff ultimately reflects the difference between precipitation (P) and evapotranspiration (ET), as modulated by biogeophysical mechanisms that intensify or alleviate drought impacts. These modulating mechanisms are seldom measured and not fully understood. The impact of the warm 2012-15 California drought on the heavily instrumented Kings River basin provides an extraordinary opportunity to enumerate four mechanisms that controlled the impact of drought on mountain hydrology. Two mechanisms intensified the impact: (i) evaporative processes have first access to local precipitation, which decreased the fractional allocation of P to runoff in 2012-15 and reduced P-ET by 30% relative to previous years, and (ii) 2012-15 was 1 °C warmer than the previous decade, which increased ET relative to previous years and reduced P-ET by 5%. The other two mechanisms alleviated the impact: (iii) spatial heterogeneity and the continuing supply of runoff from higher elevations increased 2012-15 P-ET by 10% relative to that expected for a homogenous basin, and iv) drought-associated dieback and wildfire thinned the forest and decreased ET, which increased 2016 P-ET by 15%. These mechanisms are all important and may offset each other; analyses that neglect one or more will over or underestimate the impact of drought and warming on mountain runoff.

75 FR 2102 - Endangered and Threatened Wildlife and Plants; Proposed Rule To List the Shovelnose Sturgeon as...

Science.gov (United States)

2010-01-14

... receive public comments on the proposal. If you have previously submitted comments, please do not resubmit... on the length of written comments submitted to us. If you have any questions concerning the [[Page...; Proposed Rule To List the Shovelnose Sturgeon as Threatened Due to Similarity of Appearance AGENCY: Fish...

Mechanical core coupling and reactors stability

International Nuclear Information System (INIS)

Suarez Antola, R.

2006-01-01

Structural parts of nuclear reactors are complex mechanical systems, able to vibrate with a set of proper frequencies when suitably excited. Cyclical variations in the strain state of the materials, including density perturbations, are produced. This periodic changes may affect reactor reactivity. But a variation in reactivity affects reactor thermal power, thus modifying the temperature field of the abovementiones materials. If the variation in temperature fields is fast enough, thermal-mechanical coupling may produce fast variations in strain states, and this, at its turn, modifies the reactivity, and so on. This coupling between mechanical vibrations of the structure and the materials of the core, with power oscillations of the reactor, not only may not be excluded a priori, but it seems that it has been present in some stage of the incidents or accidents that happened during the development of nuclear reactor technology. The purpose of the present communication is: (a) To review and generalize some mathematical models that were proposed in order to describe thermal-mechanical coupling in nuclear reactors. (b) To discuss some conditions in which significant instabilities could arise, including large amplitude power oscillations coupled with mechanical vibrations whose amplitudes are too small to be excluded by conventional criteria of mechanical design. Enough Certain aspects of thr physical safety of nuclear power reactors, that are objected by people that opposes to the renaissance of nucleoelectric generation, are discussed in the framework of the mathematical model proposed in this paper [es

Action spectrum and mechanisms of UV radiation-induced injury in lupus erythematosus

International Nuclear Information System (INIS)

Kochevar, I.E.

1985-01-01

Photosensitivity associated with lupus erythematosus (LE) is well established. The photobiologic basis for this abnormal response to ultraviolet radiation, however, has not been determined. This paper summarizes the criteria for elucidating possible photobiologic mechanisms and reviews the literature relevant to the mechanism of photosensitivity in LE. In patients with LE, photosensitivity to wavelengths shorter than 320 nm has been demonstrated; wavelengths longer than 320 nm have not been adequately evaluated. DNA is a possible chromophore for photosensitivity below 320 nm. UV irradiation of skin produces thymine photodimers in DNA. UV-irradiated DNA is more antigenic than native DNA and the antigenicity of UV-irradiated DNA has been proposed, but not proven, to be involved in the development of clinical lesions. UV irradiation of mice previously injected with anti-UV-DNA antibodies produces Ig deposition and complement fixation that appears to be similar to the changes seen in lupus lesions. Antibodies to UV-irradiated DNA occur in the serum of LE patients although a correlation between antibody titers and photosensitivity was not observed. Defective repair of UV-induced DNA damage does not appear to be a mechanism for the photosensitivity in LE. Other mechanisms must also be considered. The chromophore for photosensitivity induced by wavelengths longer than 320 nm has not been investigated in vivo. In vitro studies indicate that 360-400 nm radiation activates a photosensitizing compound in the lymphocytes and serum of LE patients and causes chromosomal aberrations and cell death. The mechanism appears to involve superoxide anion

A Poroelasticity Theory Approach to Study the Mechanisms Leading to Elevated Interstitial Fluid Pressure in Solid Tumours.

Science.gov (United States)

Burazin, Andrijana; Drapaca, Corina S; Tenti, Giuseppe; Sivaloganathan, Siv

2018-05-01

Although the mechanisms responsible for elevated interstitial fluid pressure (IFP) in tumours remain obscure, it seems clear that high IFP represents a barrier to drug delivery (since the resulting adverse pressure gradient implies a reduction in the driving force for transvascular exchange of both fluid and macromolecules). R. Jain and co-workers studied this problem, and although the conclusions drawn from their idealized mathematical models offered useful insights into the causes of elevated IFP, they by no means gave a definitive explanation for this phenomenon. In this paper, we use poroelasticity theory to also develop a macroscopic mathematical model to describe the time evolution of a solid tumour, but focus our attention on the mechanisms responsible for the rise of the IFP, from that for a healthy interstitium to that measured in malignant tumours. In particular, we discuss a number of possible time scales suggested by our mathematical model and propose a tumour-dependent time scale that leads to results in agreement with experimental observations. We apply our mathematical model to simulate the effect of "vascular normalization" (as proposed by Jain in Nat Med 7:987-989, 2001) on the IFP profile and discuss and contrast our conclusions with those of previous work in the literature.

Metaphor and hyperassociativity: the imagination mechanisms behind emotion assimilation in sleep and dreaming.

Science.gov (United States)

Malinowski, Josie E; Horton, Caroline L

2015-01-01

In this paper we propose an emotion assimilation function of sleep and dreaming. We offer explanations both for the mechanisms by which waking-life memories are initially selected for processing during sleep, and for the mechanisms by which those memories are subsequently transformed during sleep. We propose that emotions act as a marker for information to be selectively processed during sleep, including consolidation into long term memory structures and integration into pre-existing memory networks; that dreaming reflects these emotion assimilation processes; and that the associations between memory fragments activated during sleep give rise to measureable elements of dream metaphor and hyperassociativity. The latter are a direct reflection, and the phenomenological experience, of emotional memory assimilation processes occurring during sleep. While many theories previously have posited a role for emotion processing and/or emotional memory consolidation during sleep and dreaming, sleep theories often do not take enough account of important dream science data, yet dream research, when conducted systematically and under ideal conditions, can greatly enhance theorizing around the functions of sleep. Similarly, dream theories often fail to consider the implications of sleep-dependent memory research, which can augment our understanding of dream functioning. Here, we offer a synthesized view, taking detailed account of both sleep and dream data and theories. We draw on extensive literature from sleep and dream experiments and theories, including often-overlooked data from dream science which we believe reflects sleep phenomenology, to bring together important ideas and findings from both domains.

Proposal of 'modular heliotron'

International Nuclear Information System (INIS)

Yamazaki, Kozo.

1993-11-01

A new modular helical configuration named 'Modular Heliotron' with clean and efficient helical magnetic divertor is proposed as an extension of the present conventional design of the continuous helical coil system. The sectored helical coils on one plane of the torus and the sectored returning vertical field coils on the other plane are combined. This coil system produces magnetic surfaces nearly equivalent to those of the l=2 helical system with one-pair poloidal coils, and overcomes the defects of construction and maintenance difficulties of the continuous coil systems. This concept satisfies the compatibility between the coil modularity and the sufficient divertor-space utilization, different from previous modular coil designs. The allowable length of the gap between each modular coil is clarified to keep good magnetic surfaces. Typical examples of the reactor coil configuration are described as an extension of the LHD (Large Helical Device) configuration. (author)

Proposal of 'Modular Heliotron'

International Nuclear Information System (INIS)

Yamazaki, Kozo

1994-01-01

A new modular helical system named 'Modular Heliotron' with clean and efficient helical magnetic divertor is proposed as an extension of the present conventional design of the continuous helical coil system. The sectored helical coils on one plane of the torus and the sectored returning vertical field coils on the other plane are combined. This coil system produces magnetic surfaces nearly equivalent to those of the l=2 helical system with one-pair poloidal coils, and overcomes the defects of construction and maintenance difficulties of the continuous coil systems. This concept satisfies the compatibility between the coil modularity and the sufficient divertor-space utilization, different from previous modular coil designs. The allowable length of the gap between each modular coil is clarified to keep good magnetic surfaces. Typical examples of the reactor coil configuration are described as an extension of the LHD (Large Helical Device) configuration. (author)

Identification of the Scale of Changes in Personnel Motivation Techniques at Mechanical-Engineering Enterprises

Directory of Open Access Journals (Sweden)

Melnyk Olga G.

2016-02-01

Full Text Available The method for identification of the scale of changes in personnel motivation techniques at mechanical-engineering enterprises based on structural and logical sequence of implementation of relevant stages (identification of the mission, strategy and objectives of the enterprise; forecasting the development of the enterprise business environment; SWOT-analysis of actual motivation techniques, deciding on the scale of changes in motivation techniques, choosing providers for changing personnel motivation techniques, choosing an alternative to changing motivation techniques, implementation of changes in motivation techniques; control over changes in motivation techniques. It has been substantiated that the improved method enables providing a systematic and analytical justification for management decisionmaking in this field and choosing the best for the mechanical-engineering enterprise scale and variant of changes in motivation techniques. The method for identification of the scale of changes in motivation techniques at mechanical-engineering enterprises takes into account the previous, current and prospective character. Firstly, the approach is based on considering the past state in the motivational sphere of the mechanical-engineering enterprise; secondly, the method involves identifying the current state of personnel motivation techniques; thirdly, within the method framework the prospective, which is manifested in strategic vision of the enterprise development as well as in forecasting the development of its business environment, is taken into account. The advantage of the proposed method is that the level of its specification may vary depending on the set goals, resource constraints and necessity. Among other things, this method allows integrating various formalized and non-formalized causal relationships in the sphere of personnel motivation at machine-building enterprises and management of relevant processes. This creates preconditions for a

Theoretical Proposal for the Whole Phosphate Diester Hydrolysis Mechanism Promoted by a Catalytic Promiscuous Dinuclear Copper(II) Complex.

Science.gov (United States)

Esteves, Lucas F; Rey, Nicolás A; Dos Santos, Hélio F; Costa, Luiz Antônio S

2016-03-21

The catalytic mechanism that involves the cleavage of the phosphate diester model BDNPP (bis(2,4-dinitrophenyl) phosphate) catalyzed through a dinuclear copper complex is investigated in the current study. The metal complex was originally designed to catalyze catechol oxidation, and it showed an interesting catalytic promiscuity case in biomimetic systems. The current study investigates two different reaction mechanisms through quantum mechanics calculations in the gas phase, and it also includes the solvent effect through PCM (polarizable continuum model) single-point calculations using water as solvent. Two mechanisms are presented in order to fully describe the phosphate diester hydrolysis. Mechanism 1 is of the S(N)2 type, which involves the direct attack of the μ-OH bridge between the two copper(II) ions toward the phosphorus center, whereas mechanism 2 is the process in which hydrolysis takes place through proton transfer between the oxygen atom in the bridging hydroxo ligand and the other oxygen atom in the phosphate model. Actually, the present theoretical study shows two possible reaction paths in mechanism 1. Its first reaction path (p1) involves a proton transfer that occurs immediately after the hydrolytic cleavage, so that the proton transfer is the rate-determining step, which is followed by the entry of two water molecules. Its second reaction path (p2) consists of the entry of two water molecules right after the hydrolytic cleavage, but with no proton transfer; thus, hydrolytic cleavage is the rate-limiting step. The most likely catalytic path occurs in mechanism 1, following the second reaction path (p2), since it involves the lowest free energy activation barrier (ΔG(⧧) = 23.7 kcal mol(-1), in aqueous solution). A kinetic analysis showed that the experimental k(obs) value of 1.7 × 10(-5) s(-1) agrees with the calculated value k1 = 2.6 × 10(-5) s(-1); the concerted mechanism is kinetically favorable. The KIE (kinetic isotope effect) analysis

A Redundancy Mechanism Design for Hall-Based Electronic Current Transformers

Directory of Open Access Journals (Sweden)

Kun-Long Chen

2017-03-01

Full Text Available Traditional current transformers (CTs suffer from DC and AC saturation and remanent magnetization in many industrial applications. Moreover, the drawbacks of traditional CTs, such as closed iron cores, bulky volume, and heavy weight, further limit the development of an intelligent power protection system. In order to compensate for these drawbacks, we proposed a novel current measurement method by using Hall sensors, which is called the Hall-effect current transformer (HCT. The existing commercial Hall sensors are electronic components, so the reliability of the HCT is normally worse than that of the traditional CT. Therefore, our study proposes a redundancy mechanism for the HCT to strengthen its reliability. With multiple sensor modules, the method has the ability to improve the accuracy of the HCT as well. Additionally, the proposed redundancy mechanism monitoring system provides a condition-based maintenance for the HCT. We verify our method with both simulations and an experimental test. The results demonstrate that the proposed HCT with a redundancy mechanism can almost achieve Class 0.2 for measuring CTs according to IEC Standard 60044-8.

GEOMETRIZATION OF NONHOLONOMIC MECHANICAL SYSTEMS AND THEIR SOLVABILITY

Institute of Scientific and Technical Information of China (English)

慕小武; 郭仲衡

1990-01-01

A new geometrization approach to nonholonomic mechanical systems is proposed and a series of solvability conditions under the proposed geometric frame are given. The proposed frame differs essentially from Hermann’s. The limitations of Hermann’s frame are also discussed. It is shown that a system under Hermann’s frame is solvable only if its constraints are given by natural conservation laws of the corresponding constraint-free system.

A Pareto Optimal Auction Mechanism for Carbon Emission Rights

Directory of Open Access Journals (Sweden)

Mingxi Wang

2014-01-01

Full Text Available The carbon emission rights do not fit well into the framework of existing multi-item auction mechanisms because of their own unique features. This paper proposes a new auction mechanism which converges to a unique Pareto optimal equilibrium in a finite number of periods. In the proposed auction mechanism, the assignment outcome is Pareto efficient and the carbon emission rights’ resources are efficiently used. For commercial application and theoretical completeness, both discrete and continuous markets—represented by discrete and continuous bid prices, respectively—are examined, and the results show the existence of a Pareto optimal equilibrium under the constraint of individual rationality. With no ties, the Pareto optimal equilibrium can be further proven to be unique.

On the Mechanism of Berberine-INF55 (5-Nitro-2-phenylindole) Hybrid Antibacterials.

Science.gov (United States)

Dolla, Naveen K; Chen, Chao; Larkins-Ford, Jonah; Rajamuthiah, Rajmohan; Jagadeesan, Sakthimala; Conery, Annie L; Ausubel, Frederick M; Mylonakis, Eleftherios; Bremner, John B; Lewis, Kim; Kelso, Michael J

Berberine-INF55 hybrids are a promising class of antibacterials that combine berberine and the NorA multidrug resistance pump inhibitor INF55 (5-nitro-2-phenylindole) together in one molecule via a chemically stable linkage. Previous studies demonstrated the potential of these compounds for countering efflux-mediated antibacterial drug resistance but they didn't establish whether the compounds function as originally intended, i.e. with the berberine moiety providing antibacterial activity and the attached INF55 component independently blocking multidrug resistance pumps, thereby enhancing the activity of berberine by reducing its efflux. We hypothesised that if the proposed mechanism is correct, then hybrids carrying more potent INF55 pump inhibitor structures should show enhanced antibacterial effects relative to those bearing weaker inhibitors. Two INF55 analogues showing graded reductions in NorA inhibitory activity compared with INF55 were identified and their corresponding berberine-INF55 hybrids carrying equivalent INF55 inhibitor structures synthesised. Multiple assays comparing the antibacterial effects of the hybrids and their corresponding berberine-INF55 analogue combinations showed that the three hybrids all show very similar activities, leading us to conclude that the antibacterial mechanism(s) of berberine-INF55 hybrids is different from berberine-INF55 combinations.

Quantum mechanics as total physical theory

International Nuclear Information System (INIS)

Slavnov, D.A.

2002-01-01

It is shown that the principles of the total physical theory and conclusions of the standard quantum mechanics are not at such an antagonistic variance as it is usually accepted. The axioms, which make it possible to plot the renewed mathematical scheme of the quantum mechanics are formulated within the frames of the algebraic approach. The above scheme includes the standard mathematical apparatus of the quantum mechanics. Simultaneously there exists the mathematical object, which adequately describes the individual experiment. The examples of applying the proposed scheme is presented [ru

Acoustic emission generated by dislocation mechanisms during the deformation of metals

International Nuclear Information System (INIS)

Heiple, C.R.

1978-01-01

Acoustic emission is a transient elastic wave generated by the rapid release of energy within a material. A wide variety of mechanisms have been proposed as possible sources of acoustic emission. Proposed mechanisms have included crack propagation, precipitate fracture, twin formation, martensite formation, dislocation motion and/or multiplication. This paper is concerned with acoustic emission generated by dislocation mechanisms operating during plastic deformation. Twinning and martensitic phase transformations are excluded even though dislocation motion is involved in the nucleation and growth of twins and the growth of martensite

Acoustic emission generated by dislocation mechanisms during the deformation of metals

Energy Technology Data Exchange (ETDEWEB)

Heiple, C.R.

1978-01-01

Acoustic emission is a transient elastic wave generated by the rapid release of energy within a material. A wide variety of mechanisms have been proposed as possible sources of acoustic emission. Proposed mechanisms have included crack propagation, precipitate fracture, twin formation, martensite formation, dislocation motion and/or multiplication. This paper is concerned with acoustic emission generated by dislocation mechanisms operating during plastic deformation. Twinning and martensitic phase transformations are excluded even though dislocation motion is involved in the nucleation and growth of twins and the growth of martensite.

Mechanical integration studies for the CLIC vertex and inner tracking detectors

CERN Document Server

Villarejo Bermudez, M.A.; Gerwig, H.

2015-01-01

Since the publication of the CLIC Conceptual Design Report, work has proceeded in order to establish a preliminary mechanical design for the innermost CLIC detector region. This note proposes a design for the main Carbon-Fibre Reinforced Polymer (CFRP) structural elements of the inner detectors, for the beam pipe and their supports. It also describes an assembly sequence for the integration of the sensors and the mechanical components. Mechanical simulations of different structural elements and a material budget estimation are appended. Details of a proposed cabling layout for all the subdetectors are included.

On the proposed new funding framework - a trajectory for growth or ...

African Journals Online (AJOL)

In essence, the funding framework although advocating a new trajectory towards sustainable growth, paradoxically appears to lead historically disadvantaged technikons towards negative entropy. This article explores the implications of the proposed funding mechanism on technikon research outputs and highlights the ...

Microstructural characterization and formation mechanism of 21° top facets of ZnO-based nanowall structures

Energy Technology Data Exchange (ETDEWEB)

Lee, Ju Ho [Reliability Technology Research Institute, Korea Electronics Technology Institute (KETI), 68 Yatap-dong, Bundang-gu, Seongnam 463-816 (Korea, Republic of); Kim, Dong Chan [OLED Research Team 2, Samsung Mobile Display, San 24 Nonseo-dong, Giheung-gu, Yongin 446-711 (Korea, Republic of); Kim, Sang Yun [Department of Materials Science and Engineering, KAIST and Center for Nanomaterials and Chemical Reactions, IBS, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Choi, SungSoon [Reliability Technology Research Institute, Korea Electronics Technology Institute (KETI), 68 Yatap-dong, Bundang-gu, Seongnam 463-816 (Korea, Republic of); Lee, Kwan-Hun [Electronics and Communication Engineering, Kwangwoon University, 447-1 Wolgye-dong, Nowon-gu, Seoul 139-701 (Korea, Republic of); Lee, Jeong Yong, E-mail: j.y.lee@kaist.ac.kr [Department of Materials Science and Engineering, KAIST and Center for Nanomaterials and Chemical Reactions, IBS, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Koun Cho, Hyung, E-mail: chohk@skku.edu [School of Advanced Materials Science and Engineering, Sungkyunkwan University, 300 Cheoncheon-dong, Jangan-gu, Suwon, Gyeonggi-do 440-746 (Korea, Republic of)

2013-03-01

This study reports the microstructural characterization and formation mechanism of the 21° top facets of ZnO-based nanowall structures. The ZnO-based nanowall structures reported previously by many other research groups have {112"¯0} planes as major planes and top facets with a specific angle in common, irrespective of the growth techniques and growth conditions. These nanowalls were found to exist between two adjacent nanowires with a c-axis preferred orientation, and the atoms at the junction of the nanowalls and nanowires perfectly coincided with each other at an atomic level, without any defects. The top facets of the nanowalls showed periodically stepped surfaces and were identified as {011"¯5} planes, which were perpendicular to the {112"¯0} major planes. On the basis of the microstructural characterization of the synthesized ZnO-based nanowall structures, the formation mechanism and atomic structure model of the 21° top facets of the nanowall structures are proposed.

Mechanism of supply chain coordination cased on dynamic capability framework-the mediating role of manufacturing capabilities

Directory of Open Access Journals (Sweden)

Tiantian Gao

2014-10-01

Full Text Available Purpose: A critical issue has been absent from the conversation on supply chain coordination: how supply chain coordination influence the enterprise performance. This research proposes a new vision to research the performance mechanism of supply chain coordination capability as a dynamic capability. Manufacturing capabilities are existed as mediating role. Design/methodology/approach: Data from International Manufacturing Strategy Survey in 2009 is used to verify the mediating model by hierarchical regression analysis. Findings: The results show that supply chain coordination impacts the enterprise performance positively and indirect impacts the enterprise performance through quality, cost, flexibility. Research implications: This study presents an overview of the impact of supply chain coordination and manufacturing capabilities on enterprise performance, giving grasp for further research of the relationships that exist between them. Originality/value: This finding integrates insights from previous research in dynamic capability framework and supply chain management into a generalization and extension of the performance mechanism in manufacturing enterprises.

Convergent Double Auction Mechanism for a Prosumers’ Decentralized Smart Grid

Directory of Open Access Journals (Sweden)

Tadahiro Taniguchi

2015-10-01

Full Text Available In this paper, we propose a novel automated double auction mechanism called convergent linear function submission-based double-auction (CLFS-DA for a prosumers’ decentralized smart grid. The target decentralized smart grid is a regional electricity network that consists of many prosumers that have a battery and a renewable energy-based generator, such as photovoltaic cells. In the proposed double-auction mechanism, each intelligent software agent representing each prosumer submits linear demand and supply functions to an automated regional electricity market where they are registered. It is proven that the CLFS-DA mechanism is guaranteed to obtain one of the global optimal price profiles in addition to it achieving an exact balance between demand and supply, even through the learning period. The proof of convergence is provided on the basis of the theory of LFS-DA, which gives a clear bridge between a function submission-based double auction and a dual decomposition (DD-based real-time pricing procedure. The performance of the proposed mechanism is demonstrated numerically through a simulation experiment.

A Resource Sharing Mechanism for Sustainable Production in the Garment Industry

Directory of Open Access Journals (Sweden)

Ke Ma

2017-12-01

Full Text Available With the development of mass customization, the traditional garment production model needs to be optimized to have a more sustainable structure. To meet demand for flexibility, low-cost, and high-efficiency, an innovative resource sharing mechanism was proposed in this paper to form a new sustainable type of garment production. Different from the individual production in traditional models, the new mechanism involves resources being shared among various manufacturers. The tradeoff between positive and negative effects of the proposed mechanism is a key issue for sustainable production. In the present study, an overall sustainable index, integrating four production performance indicators, was defined on the basis of an Analytical Network Process to assess various production scenarios. According to the discrete-event simulation results of the different scenarios, we found that garment manufacturers could obtain comprehensive improvements in sustainable production by implementing the proposed resource sharing mechanism under the threshold of an increasing production failure rate.

Surface scattering mechanisms of tantalum nitride thin film resistor.

Science.gov (United States)

Chen, Huey-Ru; Chen, Ying-Chung; Chang, Ting-Chang; Chang, Kuan-Chang; Tsai, Tsung-Ming; Chu, Tian-Jian; Shih, Chih-Cheng; Chuang, Nai-Chuan; Wang, Kao-Yuan

2014-01-01

In this letter, we utilize an electrical analysis method to develop a TaN thin film resistor with a stricter spec and near-zero temperature coefficient of resistance (TCR) for car-used electronic applications. Simultaneously, we also propose a physical mechanism mode to explain the origin of near-zero TCR for the TaN thin film resistor (TFR). Through current fitting, the carrier conduction mechanism of the TaN TFR changes from hopping to surface scattering and finally to ohmic conduction for different TaN TFRs with different TaN microstructures. Experimental data of current-voltage measurement under successive increasing temperature confirm the conduction mechanism transition. A model of TaN grain boundary isolation ability is eventually proposed to influence the carrier transport in the TaN thin film resistor, which causes different current conduction mechanisms.

Mechanism of information resources knowledge

Directory of Open Access Journals (Sweden)

A. M. Izmailov

2016-01-01

Full Text Available Modern vector of development of the economy is quite different from previous periods, which in it turn is reflected in the strategic state documents generated including the Government of Russia. In particular, it should be noted that to date, the state defined the vector of development defined as an innovative and socially oriented. Given the level of technical and technological progress and its impact on the realities of the present time it is necessary to pay attention to enhance the relevance and significance of information in the development of modern society. The article analyzes the degree of influence of information and knowledge in modern economic processes taking place in society. The analysis is based on the study of scientific works of modern scientists specializing in the study of information problems and knowledge economy. The main trends in the development of the information society status related primarily to the expansion of data, as well as strengthening the role of progressive information technologies to reduce the role of the geographical factor of resistance in sharing knowledge. The authors defined the essence of information knowledge environment, as well as the marked characteristics form the spectrum of features inherent to the modern information environment. The analysis of the concept of «information knowledge resource» (IKR, which is a synthesis of three terms: information, knowledge, resources, and refined his interpretation. IKR designated role in shaping the knowledge economy. Presents specific features which have knowledge information and resources, among which stands out: intangibility, immeasurable, non-exclusive use. The paper presents a model of the PSI, based on the transformation of information into knowledge under the influence of certain factors that could affect the quality of the resulting knowledge. Also in the proposed IKR management mechanism as a central element of organizational change

Planning Mechanisms for Regional Electric Power Supply System Development

Directory of Open Access Journals (Sweden)

Evgeniy Anatolyevich Malyshev

2015-12-01

Full Text Available Key problems of the regional electric power supply systems are examined. These problems result from a lack of regulated interaction mechanisms for uniting the different entities’ resources aimed at the realization of investment activities. One of the main problems of the power supply industry is physical and moral aging of both generating and networking equipment. In the article, the necessity of management system formation to control the development of power sector has been proved. The deficiencies of the modern investment procedure in power companies are described. The absence of continuity between the regional and local strategic planning documents and investment planning of a power company has been found out. The possibility to develop a new mechanism for attracting investment has been proposed. The regulation of joint activities to implement the development program for the regional power supply industry has been proposed. The management system to develop the Russian power industry has been proposed. The comparative analysis of generating capacity development mechanisms has been carried out, such as capacity supply agreement (CSA, investment support mechanism (ISM, and long-term power market (LPM. The interaction procedure of the planning of the power supply infrastructure development has been described. The mechanism connecting the state sectoral and regional planning and corporate planning of power supply infrastructure development has been proposed. The regional aspects of industrial policy and its legislative support have been considered. To successfully implement the public-private-partnership (PPP projects, it is necessary to create the effective PPP model within the federal and regional legislation framework; to develop the financial model providing the recoverability of investments; to provide a mutually beneficial cooperation between executive bodies and private investors. The possibility to apply the PPP mechanism for regional

Mechanics

CERN Document Server

Chester, W

1979-01-01

When I began to write this book, I originally had in mind the needs of university students in their first year. May aim was to keep the mathematics simple. No advanced techniques are used and there are no complicated applications. The emphasis is on an understanding of the basic ideas and problems which require expertise but do not contribute to this understanding are not discussed. How­ ever, the presentation is more sophisticated than might be considered appropri­ ate for someone with no previous knowledge of the subject so that, although it is developed from the beginning, some previous acquaintance with the elements of the subject would be an advantage. In addition, some familiarity with element­ ary calculus is assumed but not with the elementary theory of differential equations, although knowledge of the latter would again be an advantage. It is my opinion that mechanics is best introduced through the motion of a particle, with rigid body problems left until the subject is more fully developed. Howev...

Quantum-mechanical calculation of carrier distribution in MOS accumulation and strong inversion layers

Directory of Open Access Journals (Sweden)

Chien-Wei Lee

2013-10-01

Full Text Available We derive a statistical physics model of two-dimensional electron gas (2DEG and propose an accurate approximation method for calculating the quantum-mechanical effects of metal-oxide-semiconductor (MOS structure in accumulation and strong inversion regions. We use an exponential surface potential approximation in solving the quantization energy levels and derive the function of density of states in 2D to 3D transition region by applying uncertainty principle and Schrödinger equation in k-space. The simulation results show that our approximation method and theory of density of states solve the two major problems of previous researches: the non-negligible error caused by the linear potential approximation and the inconsistency of density of states and carrier distribution in 2D to 3D transition region.

Preference and strategy in proposer's prosocial giving in the ultimatum game.

Science.gov (United States)

Inaba, Misato; Inoue, Yumi; Akutsu, Satoshi; Takahashi, Nobuyuki; Yamagishi, Toshio

2018-01-01

The accumulation of findings that most responders in the ultimatum game reject unfair offers provides evidence that humans are driven by social preferences such as preferences for fairness and prosociality. On the other hand, if and how the proposer's behavior is affected by social preferences remains unelucidated. We addressed this question for the first time by manipulating the knowledge that the proposer had about the responder's belief concerning the intentionality of the proposer. In a new game called the "ultimatum game with ambiguous intentions of the proposer (UGAMB)," we made the intentionality of the proposer ambiguous to the recipient. We expected and found that the proposer would make more unfair offers in this new game than in the standard ultimatum game. This expectation can be derived from either the preference-based model or the strategy model of the proposer's giving decision. The additional finding that more unfair giving in the UGAMB was not mediated by the proposer's expectation that the recipient would be more willing to accept unfair offers provided support for the preference-based model. Using a psychological measure of cognitive control, the preference-based model received additional support through a conceptual replication of the previous finding that cognitive control of intuitive drive for prosociality in the dictator game, rather than mind reading in the ultimatum game, is responsible for the difference in giving between the two games.

Tolerance Optimization for Mechanisms with Lubricated Joints

International Nuclear Information System (INIS)

Choi, J.-H.; Lee, S.J.; Choi, D.-H.

1998-01-01

This paper addresses an analytical approach to tolerance optimization for planar mechanisms with lubricated joints based on mechanical error analysis. The mobility method is applied to consider the lubrication effects at joints and planar mechanisms are stochastically defined by using the clearance vector model for mechanical error analysis. The uncertainties considered in the analysis are tolerances on link lengths and radial clearances and these are selected as design variables. To show the validity of the proposed method for mechanical error analysis, it is applied to two examples, and the results obtained are compared with those of Monte Carlo simulations. Based on the mechanical error analysis, tolerance optimizations are applied to the examples

Teaching Classical Mechanics using Smartphones

OpenAIRE

Chevrier, Joel; Madani, Laya; Ledenmat, Simon; Bsiesy, Ahmad

2012-01-01

Using a personal computer and a smartphone, iMecaProf is a software that provides a complete teaching environment for practicals associated to a Classical Mechanics course. iMecaProf proposes a visual, real time and interactive representation of data transmitted by a smartphone using the formalism of Classical Mechanics. Using smartphones is more than using a set of sensors. iMecaProf shows students that important concepts of physics they here learn, are necessary to control daily life smartp...

Word learning mechanisms.

Science.gov (United States)

He, Angela Xiaoxue; Arunachalam, Sudha

2017-07-01

How do children acquire the meanings of words? Many word learning mechanisms have been proposed to guide learners through this challenging task. Despite the availability of rich information in the learner's linguistic and extralinguistic input, the word-learning task is insurmountable without such mechanisms for filtering through and utilizing that information. Different kinds of words, such as nouns denoting object concepts and verbs denoting event concepts, require to some extent different kinds of information and, therefore, access to different kinds of mechanisms. We review some of these mechanisms to examine the relationship between the input that is available to learners and learners' intake of that input-that is, the organized, interpreted, and stored representations they form. We discuss how learners segment individual words from the speech stream and identify their grammatical categories, how they identify the concepts denoted by these words, and how they refine their initial representations of word meanings. WIREs Cogn Sci 2017, 8:e1435. doi: 10.1002/wcs.1435 This article is categorized under: Linguistics > Language Acquisition Psychology > Language. © 2017 Wiley Periodicals, Inc.

A high-resolution gene expression atlas of epistasis between gene-specific transcription factors exposes potential mechanisms for genetic interactions.

Science.gov (United States)

Sameith, Katrin; Amini, Saman; Groot Koerkamp, Marian J A; van Leenen, Dik; Brok, Mariel; Brabers, Nathalie; Lijnzaad, Philip; van Hooff, Sander R; Benschop, Joris J; Lenstra, Tineke L; Apweiler, Eva; van Wageningen, Sake; Snel, Berend; Holstege, Frank C P; Kemmeren, Patrick

2015-12-23

Genetic interactions, or non-additive effects between genes, play a crucial role in many cellular processes and disease. Which mechanisms underlie these genetic interactions has hardly been characterized. Understanding the molecular basis of genetic interactions is crucial in deciphering pathway organization and understanding the relationship between genotype, phenotype and disease. To investigate the nature of genetic interactions between gene-specific transcription factors (GSTFs) in Saccharomyces cerevisiae, we systematically analyzed 72 GSTF pairs by gene expression profiling double and single deletion mutants. These pairs were selected through previously published growth-based genetic interactions as well as through similarity in DNA binding properties. The result is a high-resolution atlas of gene expression-based genetic interactions that provides systems-level insight into GSTF epistasis. The atlas confirms known genetic interactions and exposes new ones. Importantly, the data can be used to investigate mechanisms that underlie individual genetic interactions. Two molecular mechanisms are proposed, "buffering by induced dependency" and "alleviation by derepression". These mechanisms indicate how negative genetic interactions can occur between seemingly unrelated parallel pathways and how positive genetic interactions can indirectly expose parallel rather than same-pathway relationships. The focus on GSTFs is important for understanding the transcription regulatory network of yeast as it uncovers details behind many redundancy relationships, some of which are completely new. In addition, the study provides general insight into the complex nature of epistasis and proposes mechanistic models for genetic interactions, the majority of which do not fall into easily recognizable within- or between-pathway relationships.

75 FR 76056 - FEDERAL REGISTER CITATION OF PREVIOUS ANNOUNCEMENT:

Science.gov (United States)

2010-12-07

... SECURITIES AND EXCHANGE COMMISSION Sunshine Act Meeting FEDERAL REGISTER CITATION OF PREVIOUS ANNOUNCEMENT: STATUS: Closed meeting. PLACE: 100 F Street, NE., Washington, DC. DATE AND TIME OF PREVIOUSLY ANNOUNCED MEETING: Thursday, December 9, 2010 at 2 p.m. CHANGE IN THE MEETING: Time change. The closed...

Quantum chemical study of the mechanism of action of vitamin K epoxide reductase (VKOR)

Science.gov (United States)

Deerfield, David, II; Davis, Charles H.; Wymore, Troy; Stafford, Darrel W.; Pedersen, Lee G.

Possible model, but simplistic, mechanisms for the action of vitamin K epoxide reductase (VKOR) are investigated with quantum mechanical methods (B3LYP/6-311G**). The geometries of proposed model intermediates in the mechanisms are energy optimized. Finally, the energetics of the proposed (pseudo-enzymatic) pathways are compared. We find that the several pathways are all energetically feasible. These results will be useful for designing quantum mechanical/molecular mechanical method (QM/MM) studies of the enzymatic pathway once three-dimensional structural data are determined and available for VKOR.

Sampling Molecular Conformers in Solution with Quantum Mechanical Accuracy at a Nearly Molecular-Mechanics Cost.

Science.gov (United States)

Rosa, Marta; Micciarelli, Marco; Laio, Alessandro; Baroni, Stefano

2016-09-13

We introduce a method to evaluate the relative populations of different conformers of molecular species in solution, aiming at quantum mechanical accuracy, while keeping the computational cost at a nearly molecular-mechanics level. This goal is achieved by combining long classical molecular-dynamics simulations to sample the free-energy landscape of the system, advanced clustering techniques to identify the most relevant conformers, and thermodynamic perturbation theory to correct the resulting populations, using quantum-mechanical energies from density functional theory. A quantitative criterion for assessing the accuracy thus achieved is proposed. The resulting methodology is demonstrated in the specific case of cyanin (cyanidin-3-glucoside) in water solution.

Implant breast reconstruction after salvage mastectomy in previously irradiated patients.

Science.gov (United States)

Persichetti, Paolo; Cagli, Barbara; Simone, Pierfranco; Cogliandro, Annalisa; Fortunato, Lucio; Altomare, Vittorio; Trodella, Lucio

2009-04-01

The most common surgical approach in case of local tumor recurrence after quadrantectomy and radiotherapy is salvage mastectomy. Breast reconstruction is the subsequent phase of the treatment and the plastic surgeon has to operate on previously irradiated and manipulated tissues. The medical literature highlights that breast reconstruction with tissue expanders is not a pursuable option, considering previous radiotherapy a contraindication. The purpose of this retrospective study is to evaluate the influence of previous radiotherapy on 2-stage breast reconstruction (tissue expander/implant). Only patients with analogous timing of radiation therapy and the same demolitive and reconstructive procedures were recruited. The results of this study prove that, after salvage mastectomy in previously irradiated patients, implant reconstruction is still possible. Further comparative studies are, of course, advisable to draw any conclusion on the possibility to perform implant reconstruction in previously irradiated patients.

28 CFR 10.5 - Incorporation of papers previously filed.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Incorporation of papers previously filed... CARRYING ON ACTIVITIES WITHIN THE UNITED STATES Registration Statement § 10.5 Incorporation of papers previously filed. Papers and documents already filed with the Attorney General pursuant to the said act and...

Extended quantum mechanics

International Nuclear Information System (INIS)

Pavel Bona

2000-01-01

The work can be considered as an essay on mathematical and conceptual structure of nonrelativistic quantum mechanics which is related here to some other (more general, but also to more special and 'approximative') theories. Quantum mechanics is here primarily reformulated in an equivalent form of a Poisson system on the phase space consisting of density matrices, where the 'observables', as well as 'symmetry generators' are represented by a specific type of real valued (densely defined) functions, namely the usual quantum expectations of corresponding selfjoint operators. It is shown in this paper that inclusion of additional ('nonlinear') symmetry generators (i. e. 'Hamiltonians') into this reformulation of (linear) quantum mechanics leads to a considerable extension of the theory: two kinds of quantum 'mixed states' should be distinguished, and operator - valued functions of density matrices should be used in the role of 'nonlinear observables'. A general framework for physical theories is obtained in this way: By different choices of the sets of 'nonlinear observables' we obtain, as special cases, e.g. classical mechanics on homogeneous spaces of kinematical symmetry groups, standard (linear) quantum mechanics, or nonlinear extensions of quantum mechanics; also various 'quasiclassical approximations' to quantum mechanics are all sub theories of the presented extension of quantum mechanics - a version of the extended quantum mechanics. A general interpretation scheme of extended quantum mechanics extending the usual statistical interpretation of quantum mechanics is also proposed. Eventually, extended quantum mechanics is shown to be (included into) a C * -algebraic (hence linear) quantum theory. Mathematical formulation of these theories is presented. The presentation includes an analysis of problems connected with differentiation on infinite-dimensional manifolds, as well as a solution of some problems connected with the work with only densely defined unbounded

Design proposal for ultimate shear strength of tapered steel plate girders

Directory of Open Access Journals (Sweden)

A. Bedynek

2017-03-01

Full Text Available Numerous experimental and numerical studies on prismatic plate girders subjected to shear can be found in the literature. However, the real structures are frequently designed as non-uniform structural elements. The main objective of the research is the development of a new proposal for the calculation of the ultimate shear resistance of tapered steel plate girders taking into account the specific behaviour of such members. A new mechanical model is presented in the paper and it is used to show the differences between the behaviour of uniform and tapered web panels subjected to shear. EN 1993-1-5 design specifications for the determination of the shear strength for rectangular plates are improved in order to assess the shear strength of tapered elements. Numerical studies carried out on tapered steel plate girders subjected to shear lead to confirm the suitability of the mechanical model and the proposed design expression.

The Kynurenine Pathway: a Proposed Mechanism Linking Diabetes and Periodontal Disease in Diabetic Patients

OpenAIRE

Rishabh Kapila; KS Nagesh; Asha R. Iyengar; Subash BV. Adiga

2011-01-01

Introduction: Diabetes mellitus is a metabolic disease characte-rized by dysregulation of carbohydrate, protein and lipid metabolism. Diabetes could result, in part, in activation of tryptophan metabolism. Diabetic patients are more susceptible to gingivitis and periodontitis than healthy subjects. The salivary kynurenine derivatives are also implicated in the onset and development of periodontal dis-ease in humans.The hypothesis: We propose that the tryptophan metabolites via kynurenine path...

The new proposal to the mechanism of superconductivity Part 1: principle

International Nuclear Information System (INIS)

Huang Shiming

2001-01-01

The concept of hulun electron and collective potential are proposed based on plenty of experimental facts. The superconductivity is due to the collective behavior of the hulun electron's ordered phases. At 0 K, all hulun electrons must be existed in ordered phases. All the solids containing hulun electrons will become superconductors as the temperature approaches to 0 K. The solids not containing hulun electrons will never become superconductors. For the solids containing only one hulun electron phase, phase change occurs only one time as the temperature rises up from 0 K, this is the first kind superconductors. The superconducting temperature TC is the temperature at which the phase change occurs. For solids containing two or more hulun electron phases, as temperature rises up from 0 K, the hulun electron phases's change will begin from the lowest stablized phase, then the higher. As long as there is just one hulun electron phase retaining in ordered state, the solids is still a superconductor. The superconducting transition temperature T C is the temperature at which the most stable hulun electron phase occurs phase change. This is the second kind superconductors

Proposed Model of Information Behaviour in Crisis: The Case of Hurricane Sandy

Science.gov (United States)

Lopatovska, Irene; Smiley, Bobby

2013-01-01

Introduction: The paper proposes a model of information behaviour in crisis. No previous model has attempted to integrate information resources, information behaviour and needs of the storm-affected communities within the temporal stages of a natural disaster. Method: The study was designed as autoethnography. The data were collected through a…

Mechanisms underlying the cardiac pacemaker: the role of SK4 calcium-activated potassium channels.

Science.gov (United States)

Weisbrod, David; Khun, Shiraz Haron; Bueno, Hanna; Peretz, Asher; Attali, Bernard

2016-01-01

The proper expression and function of the cardiac pacemaker is a critical feature of heart physiology. The sinoatrial node (SAN) in human right atrium generates an electrical stimulation approximately 70 times per minute, which propagates from a conductive network to the myocardium leading to chamber contractions during the systoles. Although the SAN and other nodal conductive structures were identified more than a century ago, the mechanisms involved in the generation of cardiac automaticity remain highly debated. In this short review, we survey the current data related to the development of the human cardiac conduction system and the various mechanisms that have been proposed to underlie the pacemaker activity. We also present the human embryonic stem cell-derived cardiomyocyte system, which is used as a model for studying the pacemaker. Finally, we describe our latest characterization of the previously unrecognized role of the SK4 Ca(2+)-activated K(+) channel conductance in pacemaker cells. By exquisitely balancing the inward currents during the diastolic depolarization, the SK4 channels appear to play a crucial role in human cardiac automaticity.

Proposal for quantum many-body simulation and torsional matter-wave interferometry with a levitated nanodiamond

Science.gov (United States)

Ma, Yue; Hoang, Thai M.; Gong, Ming; Li, Tongcang; Yin, Zhang-qi

2017-08-01

Hybrid spin-mechanical systems have great potential in sensing, macroscopic quantum mechanics, and quantum information science. In order to induce strong coupling between an electron spin and the center-of-mass motion of a mechanical oscillator, a large magnetic gradient usually is required, which is difficult to achieve. Here we show that strong coupling between the electron spin of a nitrogen-vacancy (NV) center and the torsional vibration of an optically levitated nanodiamond can be achieved in a uniform magnetic field. Thanks to the uniform magnetic field, multiple spins can strongly couple to the torsional vibration at the same time. We propose utilizing this coupling mechanism to realize the Lipkin-Meshkov-Glick (LMG) model by an ensemble of NV centers in a levitated nanodiamond. The quantum phase transition in the LMG model and finite number effects can be observed with this system. We also propose generating torsional superposition states and realizing torsional matter-wave interferometry with spin-torsional coupling.

Tunable optical nonreciprocity and a phonon-photon router in an optomechanical system with coupled mechanical and optical modes

Science.gov (United States)

Li, Guolong; Xiao, Xiao; Li, Yong; Wang, Xiaoguang

2018-02-01

We propose a multimode optomechanical system to realize tunable optical nonreciprocity that has the prospect of making an optical diode for information technology. The proposed model consists of two subsystems, each of which contains two optical cavities, injected with a classical field and a quantum signal via a 50:50 beam splitter, and a mechanical oscillator, coupled to both cavities via optomechanical coupling. Meanwhile two cavities and an oscillator in a subsystem are respectively coupled to their corresponding cavities and an oscillator in the other subsystem. Our scheme yields nonreciprocal effects at different frequencies with opposite directions, but each effective linear optomechanical coupling can be controlled by an independent classical one-frequency pump. With this setup one is able to apply quantum states with large fluctuations, which extends the scope of applicable quantum states, and exploit the independence of paths. Moreover, the optimal frequencies for nonreciprocal effects can be controlled by adjusting the relevant parameters. We also exhibit the path switching of two directions, from a mechanical input to two optical output channels, via tuning the signal frequency. In experiment, the considered scheme can be tuned to reach small damping rates of the oscillators relative to those of the cavities, which is more practical and requires less power than in previous schemes.

Incentive-Rewarding Mechanism for User-position Control in Mobile Services

Science.gov (United States)

Yoshino, Makoto; Sato, Kenichiro; Shinkuma, Ryoichi; Takahashi, Tatsuro

When the number of users in a service area increases in mobile multimedia services, no individual user can obtain satisfactory radio resources such as bandwidth and signal power because the resources are limited and shared. A solution for such a problem is user-position control. In the user-position control, the operator informs users of better communication areas (or spots) and navigates them to these positions. However, because of subjective costs caused by subjects moving from their original to a new position, they do not always attempt to move. To motivate users to contribute their resources in network services that require resource contributions for users, incentive-rewarding mechanisms have been proposed. However, there are no mechanisms that distribute rewards appropriately according to various subjective factors involving users. Furthermore, since the conventional mechanisms limit how rewards are paid, they are applicable only for the network service they targeted. In this paper, we propose a novel incentive-rewarding mechanism to solve these problems, using an external evaluator and interactive learning agents. We also investigated ways of appropriately controlling rewards based on user contributions and system service quality. We applied the proposed mechanism and reward control to the user-position control, and demonstrated its validity.

New mechanism for generating density perturbations from inflation

International Nuclear Information System (INIS)

Dvali, Gia; Gruzinov, Andrei; Zaldarriaga, Matias

2004-01-01

We propose a new mechanism to generate density perturbations in inflationary models. Spatial fluctuations in the decay rate of the inflaton field to ordinary matter lead to fluctuations in the reheating temperature. We argue that in most realistic models of inflation the coupling of the inflaton to normal matter is determined by the vacuum expectation values of fields in the theory. If those fields are light during inflation (this is a generic situation in the minimal models of supersymmetric inflation) they will fluctuate leading to density perturbations through the proposed mechanism. We show that these fluctuations could easily dominate over the ones generated through the standard mechanism. The new scenario has several consequences for inflation model building and observations. The proposed mechanism allows us to generate the observed level of density perturbations with a much lower scale of inflation and thus generically predicts a smaller level of gravitational waves. The relation between the slope of the spectrum of the produced density perturbations and the potential of the inflaton field is different from the standard relations obtained in the context of slow roll inflation. Because the field responsible for the fluctuations is not the inflaton, it can have significantly larger self-couplings and thus density perturbations could be non-Gaussian. The non-Gaussianity can be large enough to be detectable by CMB and large scale structure observations

No discrimination against previous mates in a sexually cannibalistic spider

Science.gov (United States)

Fromhage, Lutz; Schneider, Jutta M.

2005-09-01

In several animal species, females discriminate against previous mates in subsequent mating decisions, increasing the potential for multiple paternity. In spiders, female choice may take the form of selective sexual cannibalism, which has been shown to bias paternity in favor of particular males. If cannibalistic attacks function to restrict a male's paternity, females may have little interest to remate with males having survived such an attack. We therefore studied the possibility of female discrimination against previous mates in sexually cannibalistic Argiope bruennichi, where females almost always attack their mate at the onset of copulation. We compared mating latency and copulation duration of males having experienced a previous copulation either with the same or with a different female, but found no evidence for discrimination against previous mates. However, males copulated significantly shorter when inserting into a used, compared to a previously unused, genital pore of the female.

A proposed community reaction-wall facility at the JRC Ispra

Energy Technology Data Exchange (ETDEWEB)

Jones, P M; Donea, J [Commission of the European Communities, Joint Research Centre - Ispra Establishment Applied Mechanics Division, Ispra (Italy)

1988-07-01

The paper describes a large-size structural laboratory based on a reaction-wall facility proposed for the JRC Ispra establishment. It is foreseen that this will be used for large and full-scale testing of a wide variety of structures and components in the fields of civil/structural, mechanical, and geotechnical engineering. After briefly reviewing the background market research done to establish the needs for a large central facility in the Community, the main advantages and limitations of reaction-wall testing in comparison with other experimental techniques are summarized. The main characteristics of the proposed facility are then given followed by the identified fields of research in which significant tests can be performed. Finally, the proposed method of implementing an integral programme of work within the European Community member states is presented. (author)

A proposed community reaction-wall facility at the JRC Ispra

International Nuclear Information System (INIS)

Jones, P.M.; Donea, J.

1988-01-01

The paper describes a large-size structural laboratory based on a reaction-wall facility proposed for the JRC Ispra establishment. It is foreseen that this will be used for large and full-scale testing of a wide variety of structures and components in the fields of civil/structural, mechanical, and geotechnical engineering. After briefly reviewing the background market research done to establish the needs for a large central facility in the Community, the main advantages and limitations of reaction-wall testing in comparison with other experimental techniques are summarized. The main characteristics of the proposed facility are then given followed by the identified fields of research in which significant tests can be performed. Finally, the proposed method of implementing an integral programme of work within the European Community member states is presented. (author)

Dynamics of ozone layer under Serbia and solar activity: Previous statement

Directory of Open Access Journals (Sweden)

Ducić Vladan

2008-01-01

Full Text Available The aim of this paper is to identify ozone layer dynamics under Serbian area, as well as possible relations of change in stratospheric ozone concentration with some parameters of solar activity. During the period 1979-2005, the statistical decrease of ozone concentration was noticed under Serbian territory cumulatively for 24.5 DU (7.2%, apropos 9.4 DU (2.8% by decade. These changes are consistent with the changes in surrounding countries. From absolute minimum 1993, flexible trend of ozone layer pentad values validate hypotheses of its recovery. Correspondence of ozone thickness extreme period with Wolf's number and with the greatest volcanic eruptions shows that interannual variations of stratospheric ozone concentration are still in the function of natural factors above all, as are solar and volcanic activities. Investigation of larger number solar activity parameters shows statistically important antiphase synchronous between the number of polar faculae on the Sun and stratospheric ozone dynamics under Serbia. Respecting that relation between these two features until now isn't depicted, some possible causal mechanisms are proposed.

Nonlinear wave mechanics from classical dynamics and scale covariance

International Nuclear Information System (INIS)

Hammad, F.

2007-01-01

Nonlinear Schroedinger equations proposed by Kostin and by Doebner and Goldin are rederived from Nottale's prescription for obtaining quantum mechanics from classical mechanics in nondifferentiable spaces; i.e., from hydrodynamical concepts and scale covariance. Some soliton and plane wave solutions are discussed

Fast analytical model of MZI micro-opto-mechanical pressure sensor

Science.gov (United States)

Rochus, V.; Jansen, R.; Goyvaerts, J.; Neutens, P.; O’Callaghan, J.; Rottenberg, X.

2018-06-01

This paper presents a fast analytical procedure in order to design a micro-opto-mechanical pressure sensor (MOMPS) taking into account the mechanical nonlinearity and the optical losses. A realistic model of the photonic MZI is proposed, strongly coupled to a nonlinear mechanical model of the membrane. Based on the membrane dimensions, the residual stress, the position of the waveguide, the optical wavelength and the phase variation due to the opto-mechanical coupling, we derive an analytical model which allows us to predict the response of the total system. The effect of the nonlinearity and the losses on the total performance are carefully studied and measurements on fabricated devices are used to validate the model. Finally, a design procedure is proposed in order to realize fast design of this new type of pressure sensor.

Ear-body lift and a novel thrust generating mechanism revealed by the complex wake of brown long-eared bats (Plecotus auritus)

DEFF Research Database (Denmark)

Johansson, L Christoffer; Håkansson, Jonas; Jakobsen, Lasse

2016-01-01

. We also propose that the bats use a novel wing pitch mechanism at the end of the upstroke generating thrust at low speeds, which should provide effective pitch and yaw control. In addition, the wing tip vortices show a distinct spiraling pattern. The tip vortex of the previous wingbeat remains...... into the next wingbeat and rotates together with a newly formed tip vortex. Several smaller vortices, related to changes in circulation around the wing also spiral the tip vortex. Our results thus show a new level of complexity in bat wakes and suggest large eared bats are less aerodynamically limited than...

Soft-rigid interaction mechanism towards a lobster-inspired hybrid actuator

Science.gov (United States)

Chen, Yaohui; Wan, Fang; Wu, Tong; Song, Chaoyang

2018-01-01

Soft pneumatic actuators (SPAs) are intrinsically light-weight, compliant and therefore ideal to directly interact with humans and be implemented into wearable robotic devices. However, they also pose new challenges in describing and sensing their continuous deformation. In this paper, we propose a hybrid actuator design with bio-inspirations from the lobsters, which can generate reconfigurable bending movements through the internal soft chamber interacting with the external rigid shells. This design with joint and link structures enables us to exactly track its bending configurations that previously posed a significant challenge to soft robots. Analytic models are developed to illustrate the soft-rigid interaction mechanism with experimental validation. A robotic glove using hybrid actuators to assist grasping is assembled to illustrate their potentials in safe human-robot interactions. Considering all the design merits, our work presents a practical approach to the design of next-generation robots capable of achieving both good accuracy and compliance.

Formation of U(IV) Nanoparticles and Their Growth Mechanism in Mildly Acidic Aqueous Phases

Energy Technology Data Exchange (ETDEWEB)

Cha, Wan Sik; Kim, Sun Tae; Cho, Hye Ryun; Jung, Euo Chang [KAERI, Daejeon (Korea, Republic of)

2016-05-15

Previous studies suggest that U(IV) nanoparticle (NP) formation is one of key steps in mineralization or immobilization of uranium which can be mediated either by microbes or by abiotic geochemical reactions. Colloidal NPs in a groundwater system are potential carrier phases influencing RN migration in subsurface environment. However, the mechanism of U(IV) NP formation and the potential reaction intermediates during this solid phase formation process have not been elucidated in detail so far. In this study we attempted to examine the U(IV) nanoparticle formation reactions preceded by the hydrolysis of U{sup 4+} at different pHs, concentrations and temperatures. The kinetics of U(IV) NP formation from dissolved U(IV) species was monitored under mildly acidic conditions (pH 2 ∼ 3) mainly by using UV-Vis absorption spectrophotometry. Dynamic light scattering (DLS) analysis, nanoparticle tracking analysis (NTA) and transmission electron microscopy (TEM) were used to characterize the NPs produced during the reactions. The results demonstrate that the U(IV) NP formation process is very sensitive toward temperature variation. The main outcome of this study is the discovery of the autocatalytic nature of U(IV) NP formation from the supersaturated U(OH){sup 3+} solution in a mildly acidic aqueous solution. The structure of reaction intermediates is proposed to contain oxide linkage. In the presentation the proposed mechanism of the U(IV) NP formation reaction and the properties of primary NPs and their clusters will be discussed in detail.

Newton-Krylov-BDDC solvers for nonlinear cardiac mechanics

KAUST Repository

Pavarino, L.F.; Scacchi, S.; Zampini, Stefano

2015-01-01

The aim of this work is to design and study a Balancing Domain Decomposition by Constraints (BDDC) solver for the nonlinear elasticity system modeling the mechanical deformation of cardiac tissue. The contraction–relaxation process in the myocardium is induced by the generation and spread of the bioelectrical excitation throughout the tissue and it is mathematically described by the coupling of cardiac electro-mechanical models consisting of systems of partial and ordinary differential equations. In this study, the discretization of the electro-mechanical models is performed by Q1 finite elements in space and semi-implicit finite difference schemes in time, leading to the solution of a large-scale linear system for the bioelectrical potentials and a nonlinear system for the mechanical deformation at each time step of the simulation. The parallel mechanical solver proposed in this paper consists in solving the nonlinear system with a Newton-Krylov-BDDC method, based on the parallel solution of local mechanical problems and a coarse problem for the so-called primal unknowns. Three-dimensional parallel numerical tests on different machines show that the proposed parallel solver is scalable in the number of subdomains, quasi-optimal in the ratio of subdomain to mesh sizes, and robust with respect to tissue anisotropy.

Newton-Krylov-BDDC solvers for nonlinear cardiac mechanics

KAUST Repository

Pavarino, L.F.

2015-07-18

The aim of this work is to design and study a Balancing Domain Decomposition by Constraints (BDDC) solver for the nonlinear elasticity system modeling the mechanical deformation of cardiac tissue. The contraction–relaxation process in the myocardium is induced by the generation and spread of the bioelectrical excitation throughout the tissue and it is mathematically described by the coupling of cardiac electro-mechanical models consisting of systems of partial and ordinary differential equations. In this study, the discretization of the electro-mechanical models is performed by Q1 finite elements in space and semi-implicit finite difference schemes in time, leading to the solution of a large-scale linear system for the bioelectrical potentials and a nonlinear system for the mechanical deformation at each time step of the simulation. The parallel mechanical solver proposed in this paper consists in solving the nonlinear system with a Newton-Krylov-BDDC method, based on the parallel solution of local mechanical problems and a coarse problem for the so-called primal unknowns. Three-dimensional parallel numerical tests on different machines show that the proposed parallel solver is scalable in the number of subdomains, quasi-optimal in the ratio of subdomain to mesh sizes, and robust with respect to tissue anisotropy.

The Cyclic Mechanical and Fatigue Properties of Ferroanelastic Beta Prime Gold Cadmium. Ph.D. Thesis. Final Report

Science.gov (United States)

Karz, R. S.

1973-01-01

The fatigue behavior of beta prime Au1.05Cd0.95 alloy was investigated and found to be exceptional for certain orientations with lives of 10,000 to 1,000,000 cycles at total strain amplitudes above 0.05 not uncommon. Fatigue lives were influenced principally by the stress level which controlled the amount of plastic deformation, and stress fatigue resistance was low compared with most metals. Failure always exhibited brittle characteristics. An algorithm was devised to predict mechanical behavior from the twin system orientations and was found in good agreement with experiment for longitudinal strains above 0.04. The cyclic mechanical properties were examined, and a model for the behavior was proposed utilizing previous theories of the restoring force and the Peierls-Nabarro stress for twinning and new concepts. Gold-cadmium was found to have certain strain fatigue resistant applications, particularly in electronics where the alloy's high electrical conductivity is utilized.

Nanoantenna using mechanical resonance

KAUST Repository

Chang Hwa Lee,

2010-11-01

Nanoantenna using mechanical resonance vibration is made from an indium tin oxide (ITO) coated vertically aligned nanorod array. Only this structure works as a radio with demodulator without any electrical circuit using field emission phenomenon. A top-down fabrication method of an ITO coated nanorod array is proposed using a modified UV lithography. The received radio frequency and the resonance frequency of nanoantenna can be controlled by the fabrication condition through the height of a nanorod array. The modulated signals are received successfully with the transmission carrier wave frequency (248MHz) and the proposed nanoantenna is expected to be used in communication system for ultra small scale sensor. ©2010 IEEE.

A novel preterm respiratory mechanics active simulator to test the performances of neonatal pulmonary ventilators

Science.gov (United States)

Cappa, Paolo; Sciuto, Salvatore Andrea; Silvestri, Sergio

2002-06-01

A patient active simulator is proposed which is capable of reproducing values of the parameters of pulmonary mechanics of healthy newborns and preterm pathological infants. The implemented prototype is able to: (a) let the operator choose the respiratory pattern, times of apnea, episodes of cough, sobs, etc., (b) continuously regulate and control the parameters characterizing the pulmonary system; and, finally, (c) reproduce the attempt of breathing of a preterm infant. Taking into account both the limitation due to the chosen application field and the preliminary autocalibration phase automatically carried out by the proposed device, accuracy and reliability on the order of 1% is estimated. The previously indicated value has to be considered satisfactory in light of the field of application and the small values of the simulated parameters. Finally, the achieved metrological characteristics allow the described neonatal simulator to be adopted as a reference device to test performances of neonatal ventilators and, more specifically, to measure the time elapsed between the occurrence of a potentially dangerous condition to the patient and the activation of the corresponding alarm of the tested ventilator.

Subsequent childbirth after a previous traumatic birth.

Science.gov (United States)

Beck, Cheryl Tatano; Watson, Sue

2010-01-01

Nine percent of new mothers in the United States who participated in the Listening to Mothers II Postpartum Survey screened positive for meeting the Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition criteria for posttraumatic stress disorder after childbirth. Women who have had a traumatic birth experience report fewer subsequent children and a longer length of time before their second baby. Childbirth-related posttraumatic stress disorder impacts couples' physical relationship, communication, conflict, emotions, and bonding with their children. The purpose of this study was to describe the meaning of women's experiences of a subsequent childbirth after a previous traumatic birth. Phenomenology was the research design used. An international sample of 35 women participated in this Internet study. Women were asked, "Please describe in as much detail as you can remember your subsequent pregnancy, labor, and delivery following your previous traumatic birth." Colaizzi's phenomenological data analysis approach was used to analyze the stories of the 35 women. Data analysis yielded four themes: (a) riding the turbulent wave of panic during pregnancy; (b) strategizing: attempts to reclaim their body and complete the journey to motherhood; (c) bringing reverence to the birthing process and empowering women; and (d) still elusive: the longed-for healing birth experience. Subsequent childbirth after a previous birth trauma has the potential to either heal or retraumatize women. During pregnancy, women need permission and encouragement to grieve their prior traumatic births to help remove the burden of their invisible pain.

Space-Time Uncertainty and Cosmology: a Proposed Quantum Model of the Universe [ 245Kb

Directory of Open Access Journals (Sweden)

Tosto S.

2013-10-01

Full Text Available The paper introduces a cosmological model of the quantum universe. The aim of the model is (i to identify the possible mechanism that governs the matter/antimatter ratio existing in the universe and concurrently to propose (ii a reasonable growth mechanism of the universe and (iii a possible explanation of the dark energy. The concept of timespace uncertainty, on which is based the present quantum approach, has been proven able to bridge quantum mechanics and relativity.

Efficient Strategy for the Calculation of Solvation Free Energies in Water and Chloroform at the Quantum Mechanical/Molecular Mechanical Level.

Science.gov (United States)

Wang, Meiting; Li, Pengfei; Jia, Xiangyu; Liu, Wei; Shao, Yihan; Hu, Wenxin; Zheng, Jun; Brooks, Bernard R; Mei, Ye

2017-10-23

The partitioning of solute molecules between immiscible solvents with significantly different polarities is of great importance. The polarization between the solute and solvent molecules plays an essential role in determining the solubility of the solute, which makes computational studies utilizing molecular mechanics (MM) rather difficult. In contrast, quantum mechanics (QM) can provide more reliable predictions. In this work, the partition coefficients of the side chain analogs of some amino acids between water and chloroform were computed. The QM solvation free energies were calculated indirectly via a series of MM states using the multistate Bennett acceptance ratio (MBAR) and the MM-to-QM corrections were applied at the two endpoints using thermodynamic perturbation (TP). Previously, it has been shown (Jia et al. J. Chem. Theory Comput. 2016, 12, 499-511) that this method provides the minimal variance in the results without running QM simulations. However, if there is insufficient overlap in phase space between the MM and QM Hamiltonians, this method fails. In this work, we propose, for the first time, a quantity termed the reweighting entropy that serves as a metric for the reliability of the TP calculations. If the reweighting entropy is below a certain threshold (0.65 for the solvation free energy calculations in this work), this MM-to-QM correction should be avoided and two alternative methods can be employed by either introducing a semiempirical state or conducting nonequilibrium simulations. However, the results show that the QM methods are not guaranteed to yield better results than the MM methods. Further improvement of the QM methods are imperative, especially the treatment of the van der Waals and the electrostatic interactions between the QM region and the MM region in the first shell. We also propose a scheme for the calculation of the van der Waals parameters for the solute molecules in nonaqueous solvent, which improves the quality of the

Study on AE in Mechanical Seal Lift-off Recognition of Mechanical Main Shaft

Directory of Open Access Journals (Sweden)

Erqing Zhang

2014-06-01

Full Text Available For the problem of the determination of lift-off position and the measurement of end face thickness for mechanical seal more difficult, the method based on acoustic emission signal end face lift-off condition monitoring technology for mechanical seal was proposed. The electric eddy current sensor made direct measurement in the internal of mechanical seal device, and the acoustic emission sensor was fixed in the outside for indirect measurement. The acoustic emission signals were de-noised by wavelet threshold de-noising method. The representative energy features were selected by wavelet packet energy spectrum algorithm. It was established that the Radial Basis Function neural network model used for identification of the mechanical seal lift-off position, and the extracted wavelet energy features as its input. It was confirmed accurate and effective that the acoustic emission identification technology through comparing with the data detected by electric eddy current sensor. So using the acoustic emission technology realized the identification of the mechanical seal lift-off position of mechanical main shaft from inside to outside. It is convenient to be used and promotion in industrial field.

Mechanics from Newton's laws to deterministic chaos

CERN Document Server

Scheck, Florian

2018-01-01

This book covers all topics in mechanics from elementary Newtonian mechanics, the principles of canonical mechanics and rigid body mechanics to relativistic mechanics and nonlinear dynamics. It was among the first textbooks to include dynamical systems and deterministic chaos in due detail. As compared to the previous editions the present 6th edition is updated and revised with more explanations, additional examples and problems with solutions, together with new sections on applications in science.   Symmetries and invariance principles, the basic geometric aspects of mechanics as well as elements of continuum mechanics also play an important role. The book will enable the reader to develop general principles from which equations of motion follow, to understand the importance of canonical mechanics and of symmetries as a basis for quantum mechanics, and to get practice in using general theoretical concepts and tools that are essential for all branches of physics.   The book contains more than 150 problems ...

Performance of different metrics proposed to CIE TC 1-91

Directory of Open Access Journals (Sweden)

Pramod Bhusal

2017-12-01

Full Text Available The main aim of the article is to find out the performance of different metrics proposed to CIE TC 1-91. Currently, six different indexes have been proposed to CIE TC 1-91: Colour Quality Scale (CQS, Feeling of Contrast Index (FCI, Memory colour rendering index (MCRI, Preference of skin (PS, Relative gamut area index (RGAI and Illuminating Engineering society Method for evaluating light source colour rendition (IES TM-30. The evaluation and analysis are based on previously conducted experiment in lighting booth. The analysis showed the area based metric FCI was good subjective preference indicator. The subjective preference was measured in terms of naturalness of objects, colourfulness of colour checker chart, and the visual appearance of the lit scene in the booth.

Experiments and video analysis in classical mechanics

CERN Document Server

de Jesus, Vitor L B

2017-01-01

This book is an experimental physics textbook on classical mechanics focusing on the development of experimental skills by means of discussion of different aspects of the experimental setup and the assessment of common issues such as accuracy and graphical representation. The most important topics of an experimental physics course on mechanics are covered and the main concepts are explored in detail. Each chapter didactically connects the experiment and the theoretical models available to explain it. Real data from the proposed experiments are presented and a clear discussion over the theoretical models is given. Special attention is also dedicated to the experimental uncertainty of measurements and graphical representation of the results. In many of the experiments, the application of video analysis is proposed and compared with traditional methods.

Mechanisms of chemical vapor generation by aqueous tetrahydridoborate. Recent developments toward the definition of a more general reaction model

Science.gov (United States)

D'Ulivo, Alessandro

2016-05-01

A reaction model describing the reactivity of metal and semimetal species with aqueous tetrahydridoborate (THB) has been drawn taking into account the mechanism of chemical vapor generation (CVG) of hydrides, recent evidences on the mechanism of interference and formation of byproducts in arsane generation, and other evidences in the field of the synthesis of nanoparticles and catalytic hydrolysis of THB by metal nanoparticles. The new "non-analytical" reaction model is of more general validity than the previously described "analytical" reaction model for CVG. The non-analytical model is valid for reaction of a single analyte with THB and for conditions approaching those typically encountered in the synthesis of nanoparticles and macroprecipitates. It reduces to the previously proposed analytical model under conditions typically employed in CVG for trace analysis (analyte below the μM level, borane/analyte ≫ 103 mol/mol, no interference). The non-analytical reaction model is not able to explain all the interference effects observed in CVG, which can be achieved only by assuming the interaction among the species of reaction pathways of different analytical substrates. The reunification of CVG, the synthesis of nanoparticles by aqueous THB and the catalytic hydrolysis of THB inside a common frame contribute to rationalization of the complex reactivity of aqueous THB with metal and semimetal species.

Development and Validation of Chemical Kinetic Mechanism Reduction Scheme for Large-Scale Mechanisms

DEFF Research Database (Denmark)

Poon, Hiew Mun; Ng, Hoon Kiat; Gan, Suyin

2014-01-01

This work is an extension to a previously reported work on chemical kinetic mechanism reduction scheme for large-scale mechanisms. Here, Perfectly Stirred Reactor (PSR) was added as a criterion of data source for mechanism reduction instead of using only auto-ignition condition. As a result......) simulations were performed to study the spray combustion phenomena within a constant volume bomb. Both non-reacting and reacting conditions were applied in this study. Liquid and vapor penetration lengths were replicated for non-reacting diesel spray. For reacting diesel spray, both ignition delay and lift......-off length were simulated. The simulation results were then compared to the experimental data of Sandia National Laboratories and No. 2 Diesel Fuel (D2) was designated as the reference fuel. Both liquid and vapor penetrations for non-reacting condition were well-matched, while ignition delay was advanced...

A model of mechanical interactions between heart and lungs.

Science.gov (United States)

Fontecave Jallon, Julie; Abdulhay, Enas; Calabrese, Pascale; Baconnier, Pierre; Gumery, Pierre-Yves

2009-12-13

To study the mechanical interactions between heart, lungs and thorax, we propose a mathematical model combining a ventilatory neuromuscular model and a model of the cardiovascular system, as described by Smith et al. (Smith, Chase, Nokes, Shaw & Wake 2004 Med. Eng. Phys.26, 131-139. (doi:10.1016/j.medengphy.2003.10.001)). The respiratory model has been adapted from Thibault et al. (Thibault, Heyer, Benchetrit & Baconnier 2002 Acta Biotheor. 50, 269-279. (doi:10.1023/A:1022616701863)); using a Liénard oscillator, it allows the activity of the respiratory centres, the respiratory muscles and rib cage internal mechanics to be simulated. The minimal haemodynamic system model of Smith includes the heart, as well as the pulmonary and systemic circulation systems. These two modules interact mechanically by means of the pleural pressure, calculated in the mechanical respiratory system, and the intrathoracic blood volume, calculated in the cardiovascular model. The simulation by the proposed model provides results, first, close to experimental data, second, in agreement with the literature results and, finally, highlighting the presence of mechanical cardiorespiratory interactions.

A proposed general model of information behaviour.

Directory of Open Access Journals (Sweden)

2003-01-01

Full Text Available Presents a critical description of Wilson's (1996 global model of information behaviour and proposes major modification on the basis of research into information behaviour of managers, conducted in Poland. The theoretical analysis and research results suggest that Wilson's model has certain imperfections, both in its conceptual content, and in graphical presentation. The model, for example, cannot be used to describe managers' information behaviour, since managers basically are not the end users of external from organization or computerized information services, and they acquire information mainly through various intermediaries. Therefore, the model cannot be considered as a general model, applicable to every category of information users. The proposed new model encompasses the main concepts of Wilson's model, such as: person-in-context, three categories of intervening variables (individual, social and environmental, activating mechanisms, cyclic character of information behaviours, and the adoption of a multidisciplinary approach to explain them. However, the new model introduces several changes. They include: 1. identification of 'context' with the intervening variables; 2. immersion of the chain of information behaviour in the 'context', to indicate that the context variables influence behaviour at all stages of the process (identification of needs, looking for information, processing and using it; 3. stress is put on the fact that the activating mechanisms also can occur at all stages of the information acquisition process; 4. introduction of two basic strategies of looking for information: personally and/or using various intermediaries.

Structure and elevator mechanism of the Na+-citrate transporter CitS.

Science.gov (United States)

Lolkema, Juke S; Slotboom, Dirk Jan

2017-08-01

The recently determined crystal structure of the bacterial Na + -citrate symporter CitS provides unexpected structural and mechanistic insights. The protein has a fold that has not been seen in other proteins, but the oligomeric state, domain organization and proposed transport mechanism strongly resemble those of the sodium-dicarboxylate symporter vcINDY, and the putative exporters YdaH and MtrF, thus hinting at convergence in structure and function. CitS and the related proteins are predicted to translocate their substrates by an elevator-like mechanism, in which a compact transport domain slides up and down through the membrane while the dimerization domain is stably anchored. Here we review the large body of available biochemical data on CitS in the light of the new crystal structure. We show that the biochemical data are fully consistent with the proposed elevator mechanism, but also demonstrate that the current structural data cannot explain how strict coupling of citrate and Na + transport is achieved. We propose a testable model for the coupling mechanism. Copyright © 2016 Elsevier Ltd. All rights reserved.

A novel numerical approach for workspace determination of parallel mechanisms

Energy Technology Data Exchange (ETDEWEB)

Zhou, Yiqun; Niu, Junchuan; Liu, Zhihui; Zhang, Fuliang [Shandong University, Shandong (China)

2017-06-15

In this paper, a novel numerical approach is proposed for workspace determination of parallel mechanisms. Compared with the classical numerical approaches, this presented approach discretizes both location and orientation of the mechanism simultaneously, not only one of the two. This technique makes the presented numerical approach applicable in determining almost all types of workspaces, while traditional numerical approaches are only applicable in determining the constant orientation workspace and orientation workspace. The presented approach and its steps to determine the inclusive orientation workspace and total orientation workspace are described in detail. A lower-mobility parallel mechanism and a six-degrees-of-freedom Stewart platform are set as examples, the workspaces of these mechanisms are estimated and visualized by the proposed numerical approach. Furthermore, the efficiency of the presented approach is discussed. The examples show that the presented approach is applicable in determining the inclusive orientation workspace and total orientation workspace of parallel mechanisms with high efficiency.

Ex vivo stretch reveals altered mechanical properties of isolated dystrophin-deficient hearts.

Directory of Open Access Journals (Sweden)

Matthew S Barnabei

Full Text Available Duchenne muscular dystrophy (DMD is a progressive and fatal disease of muscle wasting caused by loss of the cytoskeletal protein dystrophin. In the heart, DMD results in progressive cardiomyopathy and dilation of the left ventricle through mechanisms that are not fully understood. Previous reports have shown that loss of dystrophin causes sarcolemmal instability and reduced mechanical compliance of isolated cardiac myocytes. To expand upon these findings, here we have subjected the left ventricles of dystrophin-deficient mdx hearts to mechanical stretch. Unexpectedly, isolated mdx hearts showed increased left ventricular (LV compliance compared to controls during stretch as LV volume was increased above normal end diastolic volume. During LV chamber distention, sarcomere lengths increased similarly in mdx and WT hearts despite greater excursions in volume of mdx hearts. This suggests that the mechanical properties of the intact heart cannot be modeled as a simple extrapolation of findings in single cardiac myocytes. To explain these findings, a model is proposed in which disruption of the dystrophin-glycoprotein complex perturbs cell-extracellular matrix contacts and promotes the apparent slippage of myocytes past each other during LV distension. In comparison, similar increases in LV compliance were obtained in isolated hearts from β-sarcoglycan-null and laminin-α(2 mutant mice, but not in dysferlin-null mice, suggesting that increased whole-organ compliance in mdx mice is a specific effect of disrupted cell-extracellular matrix contacts and not a general consequence of cardiomyopathy via membrane defect processes. Collectively, these findings suggest a novel and cell-death independent mechanism for the progressive pathological LV dilation that occurs in DMD.

Controlling chaos based on an adaptive adjustment mechanism

International Nuclear Information System (INIS)

Zheng Yongai

2006-01-01

In this paper, we extend the ideas and techniques developed by Huang [Huang W. Stabilizing nonlinear dynamical systems by an adaptive adjustment mechanism. Phys Rev E 2000;61:R1012-5] for controlling discrete-time chaotic system using adaptive adjustment mechanism to continuous-time chaotic system. Two control approaches, namely adaptive adjustment mechanism (AAM) and modified adaptive adjustment mechanism (MAAM), are investigated. In both case sufficient conditions for the stabilization of chaotic systems are given analytically. The simulation results on Chen chaotic system have verified the effectiveness of the proposed techniques

A General Case to Determine Dimensions and Their Tolerance Zones for the Thread Parts of Epicyclic Roller-Screw Mechanisms

Directory of Open Access Journals (Sweden)

D. S. Blinov

2017-01-01

Full Text Available The most important trend in the development of aerospace industry is to increase load capacity of mechanisms, assemblies, and parts without increasing their size and weight. The above is also true for widely used in aircrafts and the most promising up to date Epicyclic Roller-Screw Mechanisms (ERSM that convert rotational movement into translational one. Previously (in the article, it was proposed to increase the load capacity (approximately by 15% through reduction of included angle of ERSM threaded parts from 90° to 70°.However, such improvement of ERSM will change dimensions of the mechanism parts and its parameters and characteristics (efficiency factor, position of initial point of contact of the conjugated thread turns and parameters of their contact interaction, as well as kinematic parameters, which will require additional studies. If we take into account the priority of these studies, then surely we must begin with development of technique to determine dimensions of the ERSM main parts and their tolerance zones because we need drawings to manufacture and test the upgraded ERSM. We have developed a technique to calculate dimensions of the main parts of ERSM and associated tolerance zones that takes in to account the change of included angle of threaded parts of the mechanism and radius of circular arc according to which roller thread profile has been fulfilled. So the proposed technique is the general one in comparison with the previous ones.This technique uses various conditions and equations to determine dimensions of parts and associated tolerance zones. For example, a nut encircles a screw with rollers, and their dimensions form a closed dimension chain, in which the dimensions and associated tolerances must be such as to ensure ERSM assembling, on the one hand, and, on the other hand the backlash of the mechanism should be minimal to ensure high load capacity, kinematic accuracy, and rigidity of ERSM. We used the following

ER stress stimulates production of the key antimicrobial peptide, cathelicidin, by forming a previously unidentified intracellular S1P signaling complex.

Science.gov (United States)

Park, Kyungho; Ikushiro, Hiroko; Seo, Ho Seong; Shin, Kyong-Oh; Kim, Young Il; Kim, Jong Youl; Lee, Yong-Moon; Yano, Takato; Holleran, Walter M; Elias, Peter; Uchida, Yoshikazu

2016-03-08

We recently identified a previously unidentified sphingosine-1-phosphate (S1P) signaling mechanism that stimulates production of a key innate immune element, cathelicidin antimicrobial peptide (CAMP), in mammalian cells exposed to external perturbations, such as UVB irradiation and other oxidative stressors that provoke subapoptotic levels of endoplasmic reticulum (ER) stress, independent of the well-known vitamin D receptor-dependent mechanism. ER stress increases cellular ceramide and one of its distal metabolites, S1P, which activates NF-κB followed by C/EBPα activation, leading to CAMP production, but in a S1P receptor-independent fashion. We now show that S1P activates NF-κB through formation of a previously unidentified signaling complex, consisting of S1P, TRAF2, and RIP1 that further associates with three stress-responsive proteins; i.e., heat shock proteins (GRP94 and HSP90α) and IRE1α. S1P specifically interacts with the N-terminal domain of heat shock proteins. Because this ER stress-initiated mechanism is operative in both epithelial cells and macrophages, it appears to be a universal, highly conserved response, broadly protective against diverse external perturbations that lead to increased ER stress. Finally, these studies further illuminate how ER stress and S1P orchestrate critical stress-specific signals that regulate production of one protective response by stimulating production of the key innate immune element, CAMP.

Successive heterolytic cleavages of H2 achieve N2 splitting on silica-supported tantalum hydrides: A DFT proposed mechanism

KAUST Repository

Soláns, Xavier Luis

2012-07-02

DFT(B3PW91) calculations have been carried out to propose a pathway for the N2 cleavage by H2 in the presence of silica-supported tantalum hydride complexes [(≡ SiO)2TaHx] that forms [(≡SiO)2Ta(NH)(NH2)] (Science2007, 317, 1056). The calculations, performed on the cluster models {μ-O[(HO)2SiO] 2}TaH1 and {μ-O[(HO)2SiO] 2}TaH3, labelled as (≡SiO)2TaH x (x = 1, 3), show that the direct hydride transfers to coordinated N-based ligands in (≡SiO)2TaH(η2-N2) and (≡SiO)2TaH(η2-HNNH) have high energy barrier barriers. These high energy barriers are due in part to a lack of energetically accessible empty orbitals in the negatively charged N-based ligands. It is shown that a succession of proton transfers and reduction steps (hydride transfer or 2 electron reduction by way of dihydride reductive coupling) to the nitrogen-based ligands leads to more energetically accessible pathways. These proton transfers, which occur by way of heterolytic activation of H2, increase the electrophilicity of the resulting ligand (diazenido, N 2H-, and hydrazido, NHNH2-, respectively) that can thus accept a hydride with a moderate energy barrier. In the case of (≡SiO)2TaH(η2-HNNH), the H 2 molecule that is adding across the Ta-N bond is released after the hydride transfer step by heterolytic elimination from (≡SiO) 2TaH(NH2)2, suggesting that dihydrogen has a key role in assisting the final steps of the reaction without itself being consumed in the process. This partly accounts for the experimental observation that the addition of H2 is needed to convert an intermediate, identified as a diazenido complex [(≡SiO)2TaH(η 2-HNNH)] from its ν(N-H) stretching frequency of 3400 cm -1, to the final product. Throughout the proposed mechanism, the tantalum remains in its preferred high oxidation state and avoids redox-type reactions, which are more energetically demanding. © 2012 American Chemical Society.

Amorphization Mechanism of Icosahedral Platinum Clusters

International Nuclear Information System (INIS)

Apra, Edoardo; Baletto, Francesca; Ferrando, Riccardo; Fortunelli, Alessandro

2004-01-01

The amorphization mechanism of high-symmetry pt nanoclusters is investigated by a combination of Molecular Dynamics simulations and Density Functional calculations. A general mechanism for amorphization, involving rosette-like structural transformations at fivefold vertices, is proposed. IN the tosette, a fivefold vertex is transformed into a hexagonal ring. We show that for icosahedral Pt nanoclusters, this transformation is associated with an energy gain, so that their most favorable structures have a low symmetry even at icosahedral magic numbers

CFCC: A Covert Flows Confinement Mechanism for Virtual Machine Coalitions

Science.gov (United States)

Cheng, Ge; Jin, Hai; Zou, Deqing; Shi, Lei; Ohoussou, Alex K.

Normally, virtualization technology is adopted to construct the infrastructure of cloud computing environment. Resources are managed and organized dynamically through virtual machine (VM) coalitions in accordance with the requirements of applications. Enforcing mandatory access control (MAC) on the VM coalitions will greatly improve the security of VM-based cloud computing. However, the existing MAC models lack the mechanism to confine the covert flows and are hard to eliminate the convert channels. In this paper, we propose a covert flows confinement mechanism for virtual machine coalitions (CFCC), which introduces dynamic conflicts of interest based on the activity history of VMs, each of which is attached with a label. The proposed mechanism can be used to confine the covert flows between VMs in different coalitions. We implement a prototype system, evaluate its performance, and show that our mechanism is practical.

CROWN: A service grid middleware with trust management mechanism

Institute of Scientific and Technical Information of China (English)

HUAI Jinpeng; HU Chunming; LI Jianxin; SUN Hailong; WO Tianyu

2006-01-01

Based on a proposed Web service-based grid architecture, a service grid middleware system called CROWN is designed in this paper. As the two kernel points of the middleware, the overlay-based distributed grid resource management mechanism is proposed, and the policy-based distributed access control mechanism with the capability of automatic negotiation of the access control policy and trust management and negotiation is also discussed in this paper. Experience of CROWN testbed deployment and application development shows that the middleware can support the typical scenarios such as computing-intensive applications, data-intensive applications and mass information processing applications.

Previously unidentified changes in renal cell carcinoma gene expression identified by parametric analysis of microarray data

International Nuclear Information System (INIS)

Lenburg, Marc E; Liou, Louis S; Gerry, Norman P; Frampton, Garrett M; Cohen, Herbert T; Christman, Michael F

2003-01-01

Renal cell carcinoma is a common malignancy that often presents as a metastatic-disease for which there are no effective treatments. To gain insights into the mechanism of renal cell carcinogenesis, a number of genome-wide expression profiling studies have been performed. Surprisingly, there is very poor agreement among these studies as to which genes are differentially regulated. To better understand this lack of agreement we profiled renal cell tumor gene expression using genome-wide microarrays (45,000 probe sets) and compare our analysis to previous microarray studies. We hybridized total RNA isolated from renal cell tumors and adjacent normal tissue to Affymetrix U133A and U133B arrays. We removed samples with technical defects and removed probesets that failed to exhibit sequence-specific hybridization in any of the samples. We detected differential gene expression in the resulting dataset with parametric methods and identified keywords that are overrepresented in the differentially expressed genes with the Fisher-exact test. We identify 1,234 genes that are more than three-fold changed in renal tumors by t-test, 800 of which have not been previously reported to be altered in renal cell tumors. Of the only 37 genes that have been identified as being differentially expressed in three or more of five previous microarray studies of renal tumor gene expression, our analysis finds 33 of these genes (89%). A key to the sensitivity and power of our analysis is filtering out defective samples and genes that are not reliably detected. The widespread use of sample-wise voting schemes for detecting differential expression that do not control for false positives likely account for the poor overlap among previous studies. Among the many genes we identified using parametric methods that were not previously reported as being differentially expressed in renal cell tumors are several oncogenes and tumor suppressor genes that likely play important roles in renal cell

A Proposal of New Spherical Particle Modeling Method Based on Stochastic Sampling of Particle Locations in Monte Carlo Simulation

Energy Technology Data Exchange (ETDEWEB)

Kim, Song Hyun; Kim, Do Hyun; Kim, Jong Kyung [Hanyang Univ., Seoul (Korea, Republic of); Noh, Jea Man [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-10-15

To the high computational efficiency and user convenience, the implicit method had received attention; however, it is noted that the implicit method in the previous studies has low accuracy at high packing fraction. In this study, a new implicit method, which can be used at any packing fraction with high accuracy, is proposed. In this study, the implicit modeling method in the spherical particle distributed medium for using the MC simulation is proposed. A new concept in the spherical particle sampling was developed to solve the problems in the previous implicit methods. The sampling method was verified by simulating the sampling method in the infinite and finite medium. The results show that the particle implicit modeling with the proposed method was accurately performed in all packing fraction boundaries. It is expected that the proposed method can be efficiently utilized for the spherical particle distributed mediums, which are the fusion reactor blanket, VHTR reactors, and shielding analysis.

Characterization and modeling of mechanical behavior of quenching and partitioning steels

International Nuclear Information System (INIS)

Arlazarov, A.; Bouaziz, O.; Masse, J.P.; Kegel, F.

2015-01-01

Q and P annealing was applied to cold rolled carbon–manganese steel with Si. Q and P cycles with different partitioning temperature and time were simulated and the evolution of microstructure and mechanical properties was investigated. All the microstructures were composed of three constituents: partitioned martensite, laths of retained austenite and MA islands. Fine microstructure characterization confirmed that C diffusion plays an important role for the stabilization of retained austenite at room temperature and further TRIP effect during mechanical loading. Good compromise between yield strength (∼1200 MPa) and uniform elongation (∼11%) was found in the case of 400 °C partitioning for 300 s due to the enhanced mechanical stability of retained austenite. Evolution of microstructure and mechanical properties was discussed and some mechanisms were proposed to explain the observations. Mechanical model for the prediction of stress–strain curves of Q and P steels was proposed, based on the obtained experimental data. Accurate prediction of stress–strain curves using model was achieved

Characterization and modeling of mechanical behavior of quenching and partitioning steels

Energy Technology Data Exchange (ETDEWEB)

Arlazarov, A., E-mail: artem.arlazarov@arcelormittal.com [ArcelorMittal Global Research and Development, Voie Romaine-BP30320, 57283 Maizières-lès-Metz Cedex (France); Laboratoire d’Etude des Microstructures et de Mécanique des Matériaux (LEM3), CNRS UMR 7239, Université de Lorraine, 57012 Metz Cedex (France); Bouaziz, O. [ArcelorMittal Global Research and Development, Voie Romaine-BP30320, 57283 Maizières-lès-Metz Cedex (France); Laboratoire d’Etude des Microstructures et de Mécanique des Matériaux (LEM3), CNRS UMR 7239, Université de Lorraine, 57012 Metz Cedex (France); Masse, J.P.; Kegel, F. [ArcelorMittal Global Research and Development, Voie Romaine-BP30320, 57283 Maizières-lès-Metz Cedex (France)

2015-01-03

Q and P annealing was applied to cold rolled carbon–manganese steel with Si. Q and P cycles with different partitioning temperature and time were simulated and the evolution of microstructure and mechanical properties was investigated. All the microstructures were composed of three constituents: partitioned martensite, laths of retained austenite and MA islands. Fine microstructure characterization confirmed that C diffusion plays an important role for the stabilization of retained austenite at room temperature and further TRIP effect during mechanical loading. Good compromise between yield strength (∼1200 MPa) and uniform elongation (∼11%) was found in the case of 400 °C partitioning for 300 s due to the enhanced mechanical stability of retained austenite. Evolution of microstructure and mechanical properties was discussed and some mechanisms were proposed to explain the observations. Mechanical model for the prediction of stress–strain curves of Q and P steels was proposed, based on the obtained experimental data. Accurate prediction of stress–strain curves using model was achieved.

New proposal of mechanical reinforcement structures to annular REBaCuO bulk magnet for compact and cryogen-free NMR spectrometer

Science.gov (United States)

Fujishiro, H.; Takahashi, K.; Naito, T.; Yanagi, Y.; Itoh, Y.; Nakamura, T.

2018-07-01

We have proposed new reinforcement structures using an aluminum alloy ring to the annular REBaCuO bulks applicable to compact and cryogen-free 400 MHz (9.4 T) nuclear magnetic resonance (NMR) spectrometer using a numerical simulation of mechanical stress. The thermal compressive stress, σθcool, which was applied to the annular bulks during cooling due to the difference of thermal expansion coefficient between bulk and aluminum alloy, became fairly enhanced at the surface of the uppermost bulk for the new reinforcement structures, compared to the conventional reinforcement with the same height as the annular bulk, in which the compressive σθcool value was reduced. During field-cooled magnetization (FCM), the electromagnetic hoop stress, σθFCM, became the maximum at the innermost edge of the uppermost ring bulk at intermediate time step. The actual total hoop stress, σθ (= σθcool + σθFCM), due to both cooling and FCM processes was also analyzed and the new ring structures are fairly effective to reduce the σθ value and became lower than the fracture strength of the bulk. The new reinforcement structures have a possibility to avoid the fracture of the bulks and to realize a 400 MHz NMR spectrometer.

A proposal for evaluation method of crack growth due to cyclic overload for piping materials based on an elastic-plastic fracture mechanics parameter

International Nuclear Information System (INIS)

Yamaguchi, Yoshihito; Katsuyama, Jinya; Onizawa, Kunio; Li, Yinsheng; Sugino, Hideharu

2011-01-01

The magnitude of Niigata-ken Chuetsu-Oki earthquake in 2007 was beyond the assumed one provided in seismic design. Therefore it becomes an important issue to evaluate the crack growth behaviors due to the cyclic overload like large earthquake. Fatigue crack growth is usually evaluated by Paris's law using the range of stress intensity factor (ΔK). However, ΔK is inappropriate in a loading condition beyond small scale yielding. In this study, the crack growth behaviors for piping materials were investigated based on an elastic-plastic fracture mechanics parameter, J-integral. It was indicated that the crack growth due to the cyclic overload beyond small scale yielding could be the sum of fatigue and ductile crack growth. The retardation effect of excessive loading on the crack growth was observed after the loading. The modified Wheeler model using J-integral has been proposed for the prediction of retardation effect. Finally, an evaluation method for crack growth behaviors due to the cyclic overload is suggested. (author)

Previously unknown species of Aspergillus.

Science.gov (United States)

Gautier, M; Normand, A-C; Ranque, S

2016-08-01

The use of multi-locus DNA sequence analysis has led to the description of previously unknown 'cryptic' Aspergillus species, whereas classical morphology-based identification of Aspergillus remains limited to the section or species-complex level. The current literature highlights two main features concerning these 'cryptic' Aspergillus species. First, the prevalence of such species in clinical samples is relatively high compared with emergent filamentous fungal taxa such as Mucorales, Scedosporium or Fusarium. Second, it is clearly important to identify these species in the clinical laboratory because of the high frequency of antifungal drug-resistant isolates of such Aspergillus species. Matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS) has recently been shown to enable the identification of filamentous fungi with an accuracy similar to that of DNA sequence-based methods. As MALDI-TOF MS is well suited to the routine clinical laboratory workflow, it facilitates the identification of these 'cryptic' Aspergillus species at the routine mycology bench. The rapid establishment of enhanced filamentous fungi identification facilities will lead to a better understanding of the epidemiology and clinical importance of these emerging Aspergillus species. Based on routine MALDI-TOF MS-based identification results, we provide original insights into the key interpretation issues of a positive Aspergillus culture from a clinical sample. Which ubiquitous species that are frequently isolated from air samples are rarely involved in human invasive disease? Can both the species and the type of biological sample indicate Aspergillus carriage, colonization or infection in a patient? Highly accurate routine filamentous fungi identification is central to enhance the understanding of these previously unknown Aspergillus species, with a vital impact on further improved patient care. Copyright © 2016 European Society of Clinical Microbiology and

78 FR 13057 - Agency Information Collection Activities; Information Collection; IT Dashboard Feedback Mechanism

Science.gov (United States)

2013-02-26

... Information Collection Activities; Information Collection; IT Dashboard Feedback Mechanism AGENCY: Office of... previously approved information collection requirement regarding IT Dashboard Feedback Mechanism. DATES... Collection 3090- 0285, IT Dashboard Feedback Mechanism, by any of the following methods: Regulations.gov...

Modelling the influence of water content on the mechanical behaviour of Callovo-Oxfordian argillite

International Nuclear Information System (INIS)

Jia, Y.; Zhang, F.; Shao, J.F.

2010-01-01

part, after a brief the coupled elastoplastic damage model proposed by Jia et al. (2009), the time-dependant behaviour of argillite is incorporated in the previous model by using the unified approach. The influence of water content on the long term mechanical behaviour of argillite under different water contents is taken into account in the framework of partially saturated porous media. The proposed model is validated by simulation of a series of creep tests with different water content. Finally, the experiment performed on the hollow cylindrical sample is simulated and analyzed. The evolutions of deformations generated and mass of sample is goodly predicted by the simulations. The numerical results help us get a good understanding of the drying/wetting impact on the poro-mechanical behaviour of argillite. (authors)

A Novel Design Framework for Structures/Materials with Enhanced Mechanical Performance

Directory of Open Access Journals (Sweden)

Jie Liu

2018-04-01