WorldWideScience

Sample records for mechanism lathrop wells

  1. Scoria Cone Construction Mechanism, Lathrop Wells Volcano, Southern Nevada

    Energy Technology Data Exchange (ETDEWEB)

    G. Valentine; D. Krier; F. Perry; G. Heiken

    2005-01-18

    Scoria cones are commonly assumed to have been constructed by the accumulation of ballistically-ejected clasts from discrete and relatively coarse-grained Strombolian bursts and subsequent avalanching such that the cone slopes are at or near the angle of repose for loose scoria. The cone at the hawaiitic Lathrop Wells volcano, southern Nevada, contains deposits that are consistent with the above processes during early cone-building phases; these early deposits are composed mainly of coarse lapilli and fluidal bombs and are partially welded, indicating relatively little cooling during flight. However, the bulk of the cone is comprised of relatively fine-grained (ash and lapilli), planar beds with no welding, even within a few tens of meters of the vent. This facies is consistent with deposition by direct fallout from sustained eruption columns of relatively well-fragmented material, primarily mantling cone slopes and with a lesser degree of avalanching than is commonly assumed. A laterally extensive fallout deposit (up to 20 km from the vent) is inferred to have formed contemporaneously with these later cone deposits. This additional mechanism for construction of scoria cones may also be important at other locations, particularly where the magmas are relatively high in volatile content and where conditions promote the formation of abundant microlites in the rising mafic magma.

  2. Geochemistry of the Lathrop Wells volcanic center

    Energy Technology Data Exchange (ETDEWEB)

    Perry, F.V.; Straub, K.T.

    1996-03-01

    Over 100 samples have been gathered from the Lathrop Wells volcanic center to assess different models of basalt petrogenesis and constrain the physical mechanisms of magma ascent in the Yucca Mountain region. Samples have been analyzed for major and trace-element chemistry, Nd, Sr and Ph isotopes, and mineral chemistry. All eruptive units contain olivine phenocrysts, but only the oldest eruptive units contain plagioclase phenocrysts. Compositions of minerals vary little between eruptive units. Geochemical data show that most of the eruptive units at Lathrop Wells defined by field criteria can be distinguished by major and trace-element chemistry. Normative compositions of basalts at Lathrop Wells correlate with stratigraphic position. The oldest basalts are primarily nepheline normative and the youngest basalts are exclusively hypersthene normative, indicating increasing silica saturation with time. Trace-element and major-element variations among eruptive units are statistically significant and support the conclusion that eruptive units at Lathrop Wells represent separate and independent magma batches. This conclusion indicates that magmas in the Yucca Mountain region ascend at preferred eruption sites rather than randomly.

  3. Eruptive and Geomorphic Processes at the Lathrop Wells Scoria Cone

    Energy Technology Data Exchange (ETDEWEB)

    G. Valentine; D.J. Krier; F.V. Perry; G. Heiken

    2006-08-03

    The {approx}80 ka Lathrop Wells volcano (southern Nevada, U.S.A.) preserves evidence for a range of explosive processes and emplacement mechanisms of pyroclastic deposits and lava fields in a small-volume basaltic center. Early cone building by Strombolian bursts was accompanied by development of a fan-like lava field reaching {approx}800 m distance from the cone, built upon a gently sloping surface. Lava flows carried rafts of cone deposits, which provide indirect evidence for cone facies in lieu of direct exposures in the active quarry. Subsequent activity was of a violent Strombolian nature, with many episodes of sustained eruption columns up to a few km in height. These deposited layers of scoria lapilli and ash in different directions depending upon wind direction at the time of a given episode, reaching up to {approx}20 km from the vent, and also produced the bulk of the scoria cone. Lava effusion migrated from south to north around the eastern base of the cone as accumulation of lavas successively reversed the topography at the base of the cone. Late lavas were emplaced during violent Strombolian activity and continued for some time after explosive eruptions had waned. Volumes of the eruptive products are: fallout--0.07 km{sup 3}, scoria cone--0.02 km{sup 3}, and lavas--0.03 km{sup 3}. Shallow-derived xenolith concentrations suggest an upper bound on average conduit diameter of {approx}21 m in the uppermost 335 m beneath the volcano. The volcano was constructed over a period of at least seven months with cone building occurring only during part of that time, based upon analogy with historical eruptions. Post-eruptive geomorphic evolution varied for the three main surface types that were produced by volcanic activity: (1) scoria cone, (2) low relief surfaces (including lavas) with abundant pyroclastic material, and (3) lavas with little pyroclastic material. The role of these different initial textures must be accounted for in estimating relative ages of

  4. 40Ar/39Ar Age of the Lathrop Wells Volcanic Center, Yucca Mountain, Nevada.

    Science.gov (United States)

    Turrin, B D; Champion, D; Fleck, R J

    1991-08-09

    Paleomagnetic and (40)Ar/(39)Ar analyses from the Lathrop Wells volcanic center, Nevada, indicate that two eruptive events have occurred there. The ages (136 +/- 8 and 141 +/- 9 thousand years ago) for these two events are analytically indistinguishable. The small angular difference (4.7 degrees ) between the paleomagnetic directions from these two events suggests they differ in age by only about 100 years. These ages are consistent with the chronology of the surficial geological units in the Yucca Mountain area. These results contradict earlier interpretations of the cinder-cone geomorphology and soil-profile data that suggest that at least five temporally discrete eruptive events occurred at Lathrop Wells approximately 20,000 years ago.

  5. DESERT PAVEMENTS AND SOILS ON BASALTIC PYROCLASTIC DEPOSITS AT LATHROP WELLS AND RED CONE VOLCANOES, SOUTHERN NEVADA ABSTRACT

    Energy Technology Data Exchange (ETDEWEB)

    G.A. Valentine; C.D. Harrington

    2005-08-26

    Formation of desert pavement and accretionary soils are intimately linked in arid environments such as the Mojave Desert. Well-sorted fallout scoria lapilli at Lathrop Wells (75-80 ky) and Red Cone ({approx}1 Ma) volcanoes (southern Nevada) formed an excellent starting material for pavement, allowing infiltration of eolian silt and fine sand that first clogs the pore space of underlying tephra and then aggrades and develops vesicular A (Av) horizons. Variations in original pyroclast sizes provide insight into minimum and maximum clast sizes that promote pavement and soil formation: pavement becomes ineffective when clasts can saltate under the strongest winds, while clasts larger than coarse lapilli are unable to form an interlocking pavement that promotes silt accumulation (necessary for Av development). Contrary to predictions that all pavements above altitudes of {approx}400 m would have been ''reset'' in their development after late Pleistocene vegetation advances (about 15 ka), the soils and pavements show clear differences in maturity between the two volcanoes. This indicates that either the pavements/soils develop slowly over many 10,000's of years and then are very stable, or that, if they are disrupted by vegetation advances, subsequent pavements are reestablished with successively more mature characteristics.

  6. DESERT PAVEMENTS AND SOILS ON BASALTIC PYROCLASTIC DEPOSITS AT LATHROP WELLS AND RED CONE VOLCANOES, SOUTHERN NEVADA

    Energy Technology Data Exchange (ETDEWEB)

    G.A. Valentine; C.D. Harrington

    2005-08-10

    Formation of desert pavement and accretionary soils are intimately linked in arid environments such as the Mojave Desert. Well-sorted fallout scoria lapilli at Lathrop Wells (75-80 ky) and Red Cone ({approx}1 Ma) volcanoes (southern Nevada) formed an excellent starting material for pavement, allowing infiltration of eolian silt and fine sand that first clogs the pore space of underlying tephra and then aggrades and develops vesicular A (Av) horizons. Variations in original pyroclast sizes provide insight into minimum and maximum clast sizes that promote pavement and soil formation: pavement becomes ineffective when clasts can saltate under the strongest winds, while clasts larger than coarse lapilli are unable to form an interlocking pavement that promotes silt accumulation (necessary for Av development). Contrary to predictions that all pavements above altitudes of {approx}400 m would have been ''reset'' in their development after late Pleistocene vegetation advances (about 15 ka), the soils and pavements show clear differences in maturity between the two volcanoes. This indicates that either the pavement soils develop slowly over many 10,000's of years and then are very stable, or that, if they are disrupted by vegetation advances, subsequent pavements are reestablished with successively more mature characteristics.

  7. Understanding cement mechanical behavior in SAGD wells

    Energy Technology Data Exchange (ETDEWEB)

    Xie, J.; Zahacy, T. A. [C-FER Technologies (Canada)

    2011-07-01

    In the heavy oil industry, the steam assisted gravity drainage process is often used to enhance oil recovery but it can cause cracks in the cement sheath. These cracks are the result of high steam temperatures and thermal expansion. In order to mitigate this risk, improved well designs are required. The aim of this paper is to present the mechanical behavior of the cement sheath during the heating phase. An analysis of the impact of design and operating parameters was conducted through thermal hydraulic and thermal mechanical analyses to assess cement integrity. These analyses were then performed on an example of an SAGD project in the southern part of the Athabasca oilsands region to assess the performance of the cement sheath. Results showed that potential damage to the cement can be reduced by slow heating and a lower Young's modulus cement blend. This paper makes recommendations for optimizing cement design in thermal recovery wells.

  8. Human radiation studies: Remembering the early years: Oral history of medical physicist Katherine L. Lathrop and physician Paul V. Harper, conducted January 26, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    This report provides a transcript of an interview with Ms. Katherine L. Lathrop and Dr. Paul V. Hopper by representatives of the DOE Office of Human Radiation Research. Ms. Lathrop and Dr. Hopper were chosen for this interview because of their long-standing interest and research experience in the development of nuclear medicine. After brief biographical sketches the researchers provide a broad and interesting description of their roles in the initial uses of many radiopharmaceuticals, their experiences in human experimentation, and interactions with many other pioneers in nuclear medicine.

  9. DESIGN AND MECHANICAL INTEGRITY OF CO2 INJECTION WELLS

    Directory of Open Access Journals (Sweden)

    Nediljka Gaurina-Međimurec

    2011-12-01

    Full Text Available Geologic Sequestration (GS is part of a process known as “carbon capture and storage (CCS” and represents the process of injecting CO2, into deep subsurface rock formations for long-term storage. For injecting of CO2 existing wells are used as well as new drilled wells. A well represents the most likely route for leakage of CO2 from geologic carbon sequestration. Maintaining mechanical integrity helps prevent the well and wellbore from becoming conduits for CO2 migration out of the injection zone. The typical components of a CO2 injection well are casing, tubing, cement, and packer. These components are relevant for maintaining mechanical integrity and ensuring CO2 does not migrate upwards from the injection zone into underground source of drinking water (USDW; therefore helping to ensure zonal isolation of the injected carbon dioxide. In order to have the safe underground storage of CO2 well integrity considerations should be present during all phases of well life including design phase, drilling, completion, injection, workover (service and abandonment. The paper describes well design, well integrity and mechanical integrity tests (MITs as a means of measuring the adequacy of the construction of the injection well and as a way to detect problems within the well system.

  10. Students' Conceptual Difficulties in Quantum Mechanics: Potential Well Problems

    Science.gov (United States)

    Ozcan, Ozgur; Didis, Nilufer; Tasar, Mehmet Fatih

    2009-01-01

    In this study, students' conceptual difficulties about some basic concepts in quantum mechanics like one-dimensional potential well problems and probability density of tunneling particles were identified. For this aim, a multiple choice instrument named Quantum Mechanics Conceptual Test has been developed by one of the researchers of this study…

  11. Students' Conceptual Difficulties in Quantum Mechanics: Potential Well Problems

    Science.gov (United States)

    Ozcan, Ozgur; Didis, Nilufer; Tasar, Mehmet Fatih

    2009-01-01

    In this study, students' conceptual difficulties about some basic concepts in quantum mechanics like one-dimensional potential well problems and probability density of tunneling particles were identified. For this aim, a multiple choice instrument named Quantum Mechanics Conceptual Test has been developed by one of the researchers of this study…

  12. Multi-Well Potentials in Quantum Mechanics and Stochastic Processes

    Directory of Open Access Journals (Sweden)

    Victor P. Berezovoj

    2010-12-01

    Full Text Available Using the formalism of extended N=4 supersymmetric quantum mechanics we consider the procedure of the construction of multi-well potentials. We demonstrate the form-invariance of Hamiltonians entering the supermultiplet, using the presented relation for integrals, which contain fundamental solutions. The possibility of partial N=4 supersymmetry breaking is determined. We also obtain exact forms of multi-well potentials, both symmetric and asymmetric, using the Hamiltonian of harmonic oscillator as initial. The modification of the shape of potentials due to variation of parameters is also discussed, as well as application of the obtained results to the study of tunneling processes. We consider the case of exact, as well as partially broken N=4 supersymmetry. The distinctive feature of obtained probability densities and potentials is a parametric freedom, which allows to substantially modify their shape. We obtain the expressions for probability densities under the generalization of the Ornstein-Uhlenbeck process.

  13. Mechanisms of formation damage in matrix-permeability geothermal wells

    Energy Technology Data Exchange (ETDEWEB)

    Bergosh, J.L.; Wiggins, R.B.; Enniss, D.O.

    1982-04-01

    Tests were conducted to determine mechanisms of formation damage that can occur in matrix permeability geothermal wells. Two types of cores were used in the testing, actual cores from the East Mesa Well 78-30RD and cores from a fairly uniform generic sandstone formation. Three different types of tests were run. The East Mesa cores were used in the testing of the sensitivity of core to filtrate chemistry. The tests began with the cores exposed to simulated East Mesa brine and then different filtrates were introduced and the effects of the fluid contrast on core permeability were measured. The East Mesa cores were also used in the second series of tests which tested formation sandstone cores were used in the third test series which investigated the effects of different sizes of entrained particles in the fluid. Tests were run with both single-particle sizes and distributions of particle mixes. In addition to the testing, core preparation techniques for simulating fracture permeability were evaluated. Three different fracture formation mechanisms were identified and compared. Measurement techniques for measuring fracture size and permeability were also developed.

  14. On the well-posedness of some mechanical variational problems

    Science.gov (United States)

    Royis, P.

    2006-03-01

    The paper aims to establish the existence and uniqueness of the solution of some variational problems constituting the basis of finite element modellings encountered in mechanics and civil engineering. And indeed, by expanding to the approximate problems coming from the space discretization, such theoretical results contribute to strengthen the robustness of the modelling softwares and the quality of their numerical results. More particularly, three kinds of mixed variational problems involving rheological non-linearities are considered here: the evolution problems of incompressible continua (solids or fluids) subjected to quasistatic small transformations, the problems of hydromechanical coupling and those coming from quasistatic large transformations of continua.

  15. Investigation of casing connection failure mechanisms in thermal wells

    Energy Technology Data Exchange (ETDEWEB)

    Xie, J. [C-FER Technologies, Edmonton, AB (Canada)

    2009-07-01

    Thermal well technologies use casing strings that consist of casing joints linked by threaded connections that are cemented over the wellbore's length in order to provide structural support and hydraulic isolation to the wellbore. Studies have demonstrated that over 80 per cent of uphole casing failures occur at the casing joint connections, and are caused by thread rupture or structural damage. This study discussed thermal well failures related to casing connection damage. Finite element analyses (FEA) were then conducted to consider various critical load conditions with a generic premium casing connection. The study considered structural integrity losses, fatigue, and leakage during connection installation. Results of the study were then used to optimize casing connection designs. The study showed that thermal cycle and curvature loading can have an impact on the structural and sealing performance of premium connections. Connection structural performance should be evaluated in order to determine appropriate designs for thermal well applications. It was concluded that the connection shoulder region is a critical area for material fatigue failure. 12 refs., 9 figs.

  16. The Double-Well Potential in Quantum Mechanics: A Simple, Numerically Exact Formulation

    Science.gov (United States)

    Jelic, V.; Marsiglio, F.

    2012-01-01

    The double-well potential is arguably one of the most important potentials in quantum mechanics, because the solution contains the notion of a state as a linear superposition of "classical" states, a concept which has become very important in quantum information theory. It is therefore desirable to have solutions to simple double-well potentials…

  17. The Double-Well Potential in Quantum Mechanics: A Simple, Numerically Exact Formulation

    Science.gov (United States)

    Jelic, V.; Marsiglio, F.

    2012-01-01

    The double-well potential is arguably one of the most important potentials in quantum mechanics, because the solution contains the notion of a state as a linear superposition of "classical" states, a concept which has become very important in quantum information theory. It is therefore desirable to have solutions to simple double-well potentials…

  18. Mechanical Analysis of the Down-Hole String in a Deep Well

    Institute of Scientific and Technical Information of China (English)

    HE Yu-fa; LIU Qing-you; ZHU Xiao-lan

    2010-01-01

    In a deep well, under high pressure and temperature, the force, deformation, and movement of the downhole string are very complicated. In this paper, based on the analysis of the working environment and load properties of the down-hole string in deep wells, the factors of high temperature, high pressure, and the complex structure of wells have been taken into consideration. The loads of the down-hole string, stability, back buckle configuration, dynamic characteristics, mechanical strength, and deformation have been systematically studied. On this basis, mechanical models of a down-hole string under different conditions have been established and software for aiding analysis has been developed. By using this software, deep well strings under different construction parameters can be simulated and analyzed, providing a theoretical basis and method for down-hole string assembly, as well as string down-hole construction and operation.

  19. Social capital and employee well-being : Disentangling intrapersonal and interpersonal selection and influence mechanisms

    NARCIS (Netherlands)

    Agneessens, F.; Wittek, R.P.M.

    2008-01-01

    We argue that sociological explanations proposed within the social capital framework to explain individual well-being are incomplete because they do not differentiate between interpersonal influence and selection mechanisms, on the one hand, and cognitive intra-personal processes. on the other. To t

  20. One-dimensional multiple-well oscillators: A time-dependent quantum mechanical approach

    Indian Academy of Sciences (India)

    Neetu Gupta; Amlan K Roy; B M Deb

    2002-10-01

    Time-dependent Schrödinger equation (TDSE) is solved numerically to calculate the ground- and first three excited-state energies, expectation values $\\langle x^{2j}\\rangle$, $j=1,2,\\ldots,6$ and probability densities of quantum mechanical multiple-well oscillators. An imaginary-time evolution technique, coupled with the minimization of energy expectation value to reach a global minimum, subject to orthogonality constraint (for excited states) has been employed. Pseudodegeneracy in symmetric, deep multiple-well potentials, probability densities and the effect of an asymmetry parameter on pseudodegeneracy are discussed.

  1. Scattering mechanisms in shallow undoped Si/SiGe quantum wells

    Directory of Open Access Journals (Sweden)

    D. Laroche

    2015-10-01

    Full Text Available We report the magneto-transport study and scattering mechanism analysis of a series of increasingly shallow Si/SiGe quantum wells with depth ranging from ∼ 100 nm to ∼ 10 nm away from the heterostructure surface. The peak mobility increases with depth, suggesting that charge centers near the oxide/semiconductor interface are the dominant scattering source. The power-law exponent of the electron mobility versus density curve, μ ∝ nα, is extracted as a function of the depth of the Si quantum well. At intermediate densities, the power-law dependence is characterized by α ∼ 2.3. At the highest achievable densities in the quantum wells buried at intermediate depth, an exponent α ∼ 5 is observed. We propose and show by simulations that this increase in the mobility dependence on the density can be explained by a non-equilibrium model where trapped electrons smooth out the potential landscape seen by the two-dimensional electron gas.

  2. Hydrolases Part I: Enzyme Mechanism, Selectivity and Control in the Synthesis of Well-Defined Polymers

    Science.gov (United States)

    Veld, Martijn A. J.; Palmans, Anja R. A.

    Lipases are highly activity in the polymerization of a range of monomers. Both ring-opening polymerization of cyclic esters and polycondensation reactions of AA-BB and AB monomers have been investigated in great detail. This paper reviews the increased understanding in enzymatic strategies for the production of well-defined polymers. Major advantages of enzymatic catalysts are the relatively mild reaction conditions, and the often-observed excellent regio-, chemo-, and enantioselectivity that allow for the direct preparation of functional materials. However, as a result of the monomer activation mechanism, polymers of low polydispersity and low quantitative degree of endgroup functionality are difficult to attain. A wide variety of (co)polymers have been synthesized and explored in a variety of applications using lipase catalysts.

  3. Perforated mechanism of a water line outlet tee pipe for an oil well drilling rig

    Directory of Open Access Journals (Sweden)

    Peng Cheng-hong

    2015-10-01

    Full Text Available A corroded tee pipe belonging to a 10-in new separator water line outlet installed in an offshore oil well drilling rig was investigated. The configuration of the large corroded pit had the shape of an imperfect horse's hoof with a completely corroded interior and a honeycomb-like cavity. There is a badly corroded pit at the welded seam at the joint connecting the tee pipe and flange. The material strength of the tee pipe meets the requirement of ASTM-A234 Gr. WPR, but its chemical composition does not meet the stipulated requirements. A deformed streamline structure or twin crystal in the ferrite phase can be seen near the surface or sub-surface of the perforated corrosion puncture edge. The micro-hardness is also different from that of the original material. The SEM results show that the puncture appears to have been a mode of quasi-cleavage fractures with secondary cracks along the direction of the crystal grain; thus, the failure has the features of mechanical and chemical corrosion. The corroded surface contains high amounts of O, C, and N, as well as S, Cl, Si, Na, Mg, Al, K, Ti, etc., all of which are corrosion products caused by sea water. The penetrating puncture hole at the turn of the tee pipe is likely the result of cavitation erosion accompanied by chemical/electrochemical corrosion, and the corrosion on the seam connecting the tee pipe and flange is likely the result of electrochemical corrosion.

  4. Distribution features, transport mechanism and destruction of cuttings bed in horizontal well

    Institute of Scientific and Technical Information of China (English)

    ZHU Xiao-hua; SUN Chao; TONG Hua

    2013-01-01

    In an effort to develop methods of solving the issue of cuttings bed in horizontal wells,a 3-D transient model is established to simulate the distribution features and the transport mechanism of cuttings bed.The CFD calculation results show that the cuttings at the cross-sectional area of the mutation location such as the drilling pipe connector would easily settle down to build up a cuttings bed and the transport performance of the cuttings in a horizontal well can only be improved to some extent by adjusting the working parameters without using any destruction tools for the cuttings bed,thus the issue of a cuttings bed can not be solved in general.Accordingly,a new approach to effectively prevent and actively destroy the cuttings bed by using the Cuttings Bed Impeller (CBI) is proposed,the sensitivity analysis of which is conducted to determine the optimal structural parameters and the best matched working parameters from a perspective of the wellbore cleaning.Results show that the use of the CBI produces a number of benefits,including the reduced drill string torque to avoid the stuck pipe incidents with corresponding improvement in hole quality,a shorter trip time,and less wear on the drill string,the top drive and the casing.This research offers theoretical guidelines for the design of destruction tools for the cuttings bed and for the wellbore cleaning control in the horizontal drilling.

  5. Research on Mechanisms of Steam Breakthrough and Profile Control Design for Steam Soaking Well

    Institute of Scientific and Technical Information of China (English)

    Liu Huiqing; Zhang Hongling; Wang Shulin; Wang Han; Bao Shucheng

    2006-01-01

    Scaled physical model tests for steam breakthrough were conducted based on the analysis of mechanisms and influence factors of steam breakthrough. Physical simulation results showed that at the initial steam breakthrough, preferential flow channels were formed in narrow sand packs and most residual oil left in these channels was immobile. This shortened the steam breakthrough time of follow-up steam flooding and decreased the increment of oil recovery efficiency. Steam breakthrough occurred easily for a smaller producer-injector spacing, and a bigger difference in physical properties between fluids and rock. Steam breakthrough is more likely to occur at a larger formation permeability (k), greater steam displacement velocity (u) and smaller producer-injector spacing (L). Steam breakthrough time is a function of the parameter group (uk/L), i.e. tb=3.2151 (uk/L) -0.5142. A non piston-like displacement model was built based on steam breakthrough observation for a steam stimulated well in the Jinglou Oilfield, Henan Oilfield Company. The steam volume swept in different directions could be obtained from inter-well permeability capacity and breakthrough angle, and the steam swept pore volume (SSPV) was also determined. Numerical simulation showed that steam sweep efficiency reached its peak value when a slug of profile control agent (slug size 10%-15% SSPV) was set at one half of the inter-well spacing. Field test with 12.5% SSPV of profile control agents in the Jinglou Oilfield achieved success in sealing breakthrough channels and good production performance of adjacent producers.

  6. Cellulose Nanofibers as a Modifier for Rheology, Curing and Mechanical Performance of Oil Well Cement

    Science.gov (United States)

    Sun, Xiuxuan; Wu, Qinglin; Lee, Sunyoung; Qing, Yan; Wu, Yiqiang

    2016-08-01

    The influence of nanocellulose on oil well cement (OWC) properties is not known in detail, despite recent advances in nanocellulose technology and its related composite materials. The effect of cellulose nanofibers (CNFs) on flow, hydration, morphology, and strength of OWC was investigated using a range of spectroscopic methods coupled with rheological modelling and strength analysis. The Vom-Berg model showed the best fitting result of the rheology data. The addition of CNFs increased the yield stress of OWC slurry and degree of hydration value of hydrated CNF-OWC composites. The flexural strength of hydrated OWC samples was increased by 20.7% at the CNF/OWC ratio of 0.04 wt%. Excessive addition of CNFs into OWC matrix had a detrimental effect on the mechanical properties of hydrated CNF-OWC composites. This phenomenon was attributed to the aggregation of CNFs as observed through coupled morphological and elemental analysis. This study demonstrates a sustainable reinforcing nano-material for use in cement-based formulations.

  7. Characterization of Rock Mechanical Properties Using Lab Tests and Numerical Interpretation Model of Well Logs

    Directory of Open Access Journals (Sweden)

    Hao Xu

    2016-01-01

    Full Text Available The tight gas reservoir in the fifth member of the Xujiahe formation contains heterogeneous interlayers of sandstone and shale that are low in both porosity and permeability. Elastic characteristics of sandstone and shale are analyzed in this study based on petrophysics tests. The tests indicate that sandstone and mudstone samples have different stress-strain relationships. The rock tends to exhibit elastic-plastic deformation. The compressive strength correlates with confinement pressure and elastic modulus. The results based on thin-bed log interpretation match dynamic Young’s modulus and Poisson’s ratio predicted by theory. The compressive strength is calculated from density, elastic impedance, and clay contents. The tensile strength is calibrated using compressive strength. Shear strength is calculated with an empirical formula. Finally, log interpretation of rock mechanical properties is performed on the fifth member of the Xujiahe formation. Natural fractures in downhole cores and rock microscopic failure in the samples in the cross section demonstrate that tensile fractures were primarily observed in sandstone, and shear fractures can be observed in both mudstone and sandstone. Based on different elasticity and plasticity of different rocks, as well as the characteristics of natural fractures, a fracture propagation model was built.

  8. Potential hydrologic characterization wells in Amargosa Valley

    Energy Technology Data Exchange (ETDEWEB)

    Lyles, B.; Mihevc, T.

    1994-09-01

    More than 500 domestic, agricultural, and monitoring wells were identified in the Amargosa Valley. From this list, 80 wells were identified as potential hydrologic characterization wells, in support of the US Department of Energy (DOE) Underground Test Area/Remedial Investigation and Feasibility Study (UGTA/RIFS). Previous hydrogeologic studies have shown that groundwater flow in the basin is complex and that aquifers may have little lateral continuity. Wells located more than 10 km or so from the Nevada Test Site (NTS) boundary may yield data that are difficult to correlate to sources from the NTS. Also, monitoring well locations should be chosen within the guidelines of a hydrologic conceptual model and monitoring plan. Since these do not exist at this time, recompletion recommendations will be restricted to wells relatively close (approximately 20 km) to the NTS boundary. Recompletion recommendations were made for two abandoned agricultural irrigation wells near the town of Amargosa Valley (previously Lathrop Wells), for two abandoned wildcat oil wells about 10 km southwest of Amargosa Valley, and for Test Well 5 (TW-5), about 10 km east of Amargosa Valley.

  9. A Preliminary Study on Mechanisms of Well Water Temperature Responses Based on the Modes of Stress Loading

    Institute of Scientific and Technical Information of China (English)

    Chen Daqing; Wan Yongfang

    2011-01-01

    Based on the studies of the predecessors, and contrasting the modes of stress loading with water level and water temperature response characteristics of a well-aquifer system, this paper draws a preliminary conclusion on the mechanisms of water temperature responses in a well caused by three modes of stress loading, i.e. gas escape, heat dispersion and cold water penetration mechanisms for elastic seismic wave stress loading; the fracture seepage mechanism for seismic wave stress loading and the hydrodynamic mechanism for earth tide stress loading and stress-dissipative heat mechanism for long period slow stress loading in the earthquake preparation stage. This paper illustrates the typical observation examples for each mode of stress loading and makes a preliminary study on their mechanisms.

  10. Building Trust and Feeling Well: Examining Intraindividual and Interpersonal Outcomes and Underlying Mechanisms of Listening

    Science.gov (United States)

    Lloyd, Karina J.; Boer, Diana; Kluger, Avraham N.; Voelpel, Sven C.

    2015-01-01

    We investigated perceived listening quality in relation to individual (self-clarity and emotional well-being) and dyadic variables (social attraction and trust). Specifically, we proposed that the link between perceived listening quality and emotional well-being is mediated by self-clarity, and that the link between perceived listening and trust…

  11. Building Trust and Feeling Well: Examining Intraindividual and Interpersonal Outcomes and Underlying Mechanisms of Listening

    Science.gov (United States)

    Lloyd, Karina J.; Boer, Diana; Kluger, Avraham N.; Voelpel, Sven C.

    2015-01-01

    We investigated perceived listening quality in relation to individual (self-clarity and emotional well-being) and dyadic variables (social attraction and trust). Specifically, we proposed that the link between perceived listening quality and emotional well-being is mediated by self-clarity, and that the link between perceived listening and trust…

  12. Tunable multicolor carbon dots prepared from well-defined polythiophene derivatives and their emission mechanism.

    Science.gov (United States)

    Guo, Liang; Ge, Jiechao; Liu, Weimin; Niu, Guangle; Jia, Qingyan; Wang, Hui; Wang, Pengfei

    2016-01-14

    Various functional precursors based on polythiophene derivatives are designed to prepare carbon dots (C-dots) with tunable emissions ranging from blue to near-infrared (NIR) at a single excitation wavelength (400 nm). The as-prepared C-dots demonstrate homogeneous size, superior optical properties, excellent water solubility, and low cytotoxicity. Thus, the C-dots are candidates for bio-imaging. A tunable photoluminescence mechanism is proposed to result from variations in the surface state and N content.

  13. Carrier localization mechanisms in InGaN/GaN quantum wells

    OpenAIRE

    Watson-Parris, D.; Godfrey, M. J.; Dawson, P.; Oliver, R. A.; Galtrey, M. J.; Kappers, M. J.; Humphreys, C J

    2010-01-01

    Localization lengths of the electrons and holes in InGaN/GaN quantum wells have been calculated using numerical solutions of the effective mass Schr\\"odinger equation. We have treated the distribution of indium atoms as random and found that the resultant fluctuations in alloy concentration can localize the carriers. By using a locally varying indium concentration function we have calculated the contribution to the potential energy of the carriers from band gap fluctuations, the deformation p...

  14. Characterization of reactive tracers for C-wells field experiments 1: Electrostatic sorption mechanism, lithium

    Energy Technology Data Exchange (ETDEWEB)

    Fuentes, H.R.; Polzer, W.L.; Essington, E.H.; Newman, B.D.

    1989-11-01

    Lithium (Li{sup +}) was introduced as lithium bromide (LiBr), as a retarded tracer for experiments in the C-wells complex at Yucca Mountain, Nevada Test Site, Nevada. The objective was to evaluate the potential of lithium to sorb predominately by physical forces. lithium was selected as a candidate tracer on the basis of high solubility, good chemical and biological stability, and relatively low sorptivity; lack of bioaccumulation and exclusion as a priority pollutant in pertinent federal environmental regulations; good analytical detectability and low natural background concentrations; and a low cost Laboratory experiments were performed with suspensions of Prow Pass cuttings from drill hole UE-25p{number_sign}1 at depths between 549 and 594 m in J-13 water at a pH of approximately 8 and in the temperature range of 25{degree}C to 45{degree}C. Batch equilibrium and kinetics experiments were performed; estimated thermodynamic constants, relative behavior between adsorption and desorption, and potentiometric studies provided information to infer the physical nature of lithium sorption.

  15. Social embeddedness as a mechanism for linking social cohesion to well-being among older adults: moderating effect of gender

    Directory of Open Access Journals (Sweden)

    Momtaz YA

    2014-05-01

    Full Text Available Yadollah Abolfathi Momtaz,1 Sharifah Azizah Haron,2 Rahimah Ibrahim,3 Tengku Aizan Hamid3 1Institute of Gerontology, Universiti Putra Malaysia, Serdang, Selangor, Malaysia; 2Institute of Gerontology, Department of Resource Management and Consumer Studies, Faculty of Human Ecology, Universiti Putra Malaysia, Serdang, Selangor, Malaysia; 3Institute of Gerontology, Department of Human Development and Family Studies, Faculty of Human Ecology, Universiti Putra Malaysia, Serdang, Selangor, Malaysia Background: The positive effect of social cohesion on well-being in older adults has been well documented. However, relatively few studies have attempted to understand the mechanisms by which social cohesion influences well-being. The main aim of the current study is to identify social pathways in which social cohesion may contribute to well-being. Methods: The data for this study (taken from 1,880 older adults, aged 60 years and older were drawn from a national survey conducted during 2008–2009. The survey employed a two-stage stratified sampling process for data collection. Structural equation modeling was used to test mediating and moderating analyses. Results: The proposed model documented a good fit to the data (GFI =98; CFI =0.99; RMSEA =0.04. The findings from bootstrap analysis and the Sobel test revealed that the impact of social cohesion on well-being is significantly mediated by social embeddedness (Z=5.62; P<0.001. Finally, the results of a multigroup analysis test showed that social cohesion influences well-being through the social embeddedness mechanism somewhat differently for older men than women. Conclusion: The findings of this study, in addition to supporting the importance of neighborhood social cohesion for the well-being of older adults, also provide evidence that the impact of social cohesion towards well-being is mediated through the mechanism of social embeddedness. Keywords: aged, social embeddedness, social cohesion, well-being

  16. Critical evaluation of the mechanical properties log (MPL) on a basal quartz well in the Caroline area

    Energy Technology Data Exchange (ETDEWEB)

    McLennan, J.D.; Elbel, J.; Mattheis, E.; Lindstrom, L.

    1982-01-01

    There is a need to quantify the in situ properties of barriers and pay zones in order to assess the potential for fracture containment and to optimize stimulation treatment design. A major testing program has been conducted jointly by Dome Petroleum Ltd., Dowell, and Schlumberger to compare laboratory-measured mechanical properties with those determined by well logging. The testing program was confined to the Basal Quartz Formation at a depth of ca 3,000 m, as it occurs in a Dome well in the Caroline area of Alberta. Laboratory testing included the determination of Young's modulus and Poisson's ratio at in situ temperature and stress conditions. The mechanical properties log was derived from the open-hole sonic log, and the in situ stresses were measured in the field. An attempt is made to explain the discrepancies on the basis of other known well data.

  17. Hydro-mechanical simulations of well abandonment at the Ketzin pilot site for CO2 storage verify wellbore system integrity

    Science.gov (United States)

    Unger, Victoria; Kempka, Thomas

    2015-04-01

    In geological underground utilisation, operating and abandoned wells have been identified as a main potential leakage pathways for reservoir fluids. In the scope of the well abandonment procedure currently carried out at the Ketzin pilot site for CO2 storage in Germany, a hydro-mechanical model was built to carry out a coupled analysis of the integrity in the entire wellbore system. The main aim of the present study was to assess the impacts of stress changes associated with CO2 injection as well as the cement backfill undertaken in the scope of well abandonment. A numerical model comprising cement sheaths, steel casings, tubing, multiple packers and wellbore annuli was implemented to enable a detailed representation of the entire wellbore system. The numerical model grid has a horizontal discretisation of 5 m x 5 m to focus on near wellbore effects, whereby element sizes increase with increasing distance from the wellbore. Vertical grid discretisation uses a tartan grid type over the entire model thickness of 1,500 m to ensure a sufficient discretisation of all wellbore system elements as well as of the reservoir unit. The total number of elements amounts to 210,672. Mechanical model parameters were taken from geological, drilling, logging and laboratory test data based on Ketzin pilot site-specific information as well as related literature (Kempka et al., 2014). The coupled calculations were performed using an elasto-plastic constitutive law, whereby an initial simulation run ensured a static mechanical equilibrium to represent the initial state before the start of CO2 injection. Thereto, gravitational load of the overburden rocks and pore pressure distribution following available well logs were integrated for initial model parameterisation including a normal faulting stress regime defined by a horizontal to vertical total stress ratio of 0.85. A correction accounting for the temperature and pressure dependent CO2 density was carried out in advance of each

  18. Well-Posedness of a fully coupled thermo-chemo-poroelastic system with applications to petroleum rock mechanics

    OpenAIRE

    Tetyana Malysheva; White, Luther W.

    2017-01-01

    We consider a system of fully coupled parabolic and elliptic equations constituting the general model of chemical thermo-poroelasticity for a fluid-saturated porous media. The main result of this paper is the developed well-posedness theory for the corresponding initial-boundary problem arising from petroleum rock mechanics applications. Using the proposed pseudo-decoupling method, we establish, subject to some natural assumptions imposed on matrices of diffusion coeff...

  19. Piezoelectric polymer foams: transducer mechanism and preparation as well as touch-sensor and ultrasonic-transducer properties

    Science.gov (United States)

    Wegener, M.

    2010-04-01

    Different materials provide a mechanical-electrical energy conversion and are thus interesting candidates for piezoelectric sensors and actuators. Beside ferroelectric ceramics and polymers, also polymer foams, so-called ferroelectrets, are developed as piezoelectric active materials. Their piezoelectricity originates from optimized structural and elastic-foam properties accompanied with an optimized charge trapping at the polymer layers within the foam structure. The piezoelectric activity arises if mechanical stimuli lead to a thickness variation of the electrically charged voids which results in an electrical signal between the connected electrodes on the film surfaces due to the change of internal electric fields. The concept of such a piezoelectric transducer was developed by investigating cellular polypropylene films with different foam structures and thus different elastic properties. Recently, ferroelectrets were prepared from other polymers following the same concept. Different kind of new foaming procedures are developed in order to broaden the range of usable materials as well as to optimize the adjustment of piezoelectric and ultrasonictransducer properties. The paper provides an overview about ferroelectrets, their underlying working mechanism as well as their preparation possibilities. In detail, piezoelectric properties of polypropylene ferroelectrets are described which are usable for pushbutton or touch-pad applications as well as in ultrasonic-transducer applications.

  20. Mechanism of production increasing of coalbed gas for the pinnate horizontal well and sensitivity effect of parameters on gas production

    Institute of Scientific and Technical Information of China (English)

    ZHANG Dongli; WANG Xinhai

    2005-01-01

    The mechanism of production increasing for the pinnate horizontal well is analyzed with the simulation technique. It is pointed out that the whole horizontal wellbore spreading widely and evenly in coal layers makes the stratum pressure drop evenly and fast, which increases the chance of desorption and diffusion and area controlled. This is the basic reason that the pinnate horizontal well can increase production. How such stratum parameters as permeability, Langmuir constants and adsorption time constant affect the gas production for the pinnate horizontal well is also studied with numerical simulations. Either for the vertical well or the pinnate horizontal well, bigger stratum permeability, steeper relative permeability curve, smaller residual gas saturation, higher gas content and stratum pressure are more favorable for gas production increasing. Langmuir constants decide the change of desorption quantity and influence the gas production through changing the extent of steep of isothermal adsorption curves in the pressure dropping area. The adsorption time constant only influences the time that gas production arrives at the maximum value for the vertical well, but it almost has no influence on the gas production for the pinnate horizontal well because the equivalent adsorption time constant is reduced.

  1. Noble gases identify the mechanisms of fugitive gas contamination in drinking-water wells overlying the Marcellus and Barnett Shales.

    Science.gov (United States)

    Darrah, Thomas H; Vengosh, Avner; Jackson, Robert B; Warner, Nathaniel R; Poreda, Robert J

    2014-09-30

    Horizontal drilling and hydraulic fracturing have enhanced energy production but raised concerns about drinking-water contamination and other environmental impacts. Identifying the sources and mechanisms of contamination can help improve the environmental and economic sustainability of shale-gas extraction. We analyzed 113 and 20 samples from drinking-water wells overlying the Marcellus and Barnett Shales, respectively, examining hydrocarbon abundance and isotopic compositions (e.g., C2H6/CH4, δ(13)C-CH4) and providing, to our knowledge, the first comprehensive analyses of noble gases and their isotopes (e.g., (4)He, (20)Ne, (36)Ar) in groundwater near shale-gas wells. We addressed two questions. (i) Are elevated levels of hydrocarbon gases in drinking-water aquifers near gas wells natural or anthropogenic? (ii) If fugitive gas contamination exists, what mechanisms cause it? Against a backdrop of naturally occurring salt- and gas-rich groundwater, we identified eight discrete clusters of fugitive gas contamination, seven in Pennsylvania and one in Texas that showed increased contamination through time. Where fugitive gas contamination occurred, the relative proportions of thermogenic hydrocarbon gas (e.g., CH4, (4)He) were significantly higher (P well failure. Noble gas data appear to rule out gas contamination by upward migration from depth through overlying geological strata triggered by horizontal drilling or hydraulic fracturing.

  2. Health, Well-Being and Coping Mechanism of BPO Shift Workers: Basis of a Proposed Development Plan

    Directory of Open Access Journals (Sweden)

    MADELYN ROUSELLE A. CRUZAT

    2014-04-01

    Full Text Available There are many studies with regard to problems caused by shift work, thus, shift workers are recently thinking about how to solve and implement behaviors that will reduce the problems caused by their work. The present study sought to determine the effects of shift work in a Business Process Outsourcing company in terms of shift workers health, Psychological well – being and their coping mechanisms and provide an Action Plan for training and development. A total number of 210 respondents who were administered Shift Work Index Questionnaire and were tabulated and analyzed using Factor Analysis, ANOVA and Post Hoc Analysis in Sheffe method. The overall results of the study showed that the level of coping mechanisms such as social, domestic, sleep routine and work performance suggests significant difference with the three groups of shift workers, thus, the hypothesis is rejected. However, health and well – being do not show significant difference as to the response of the three groups of shift workers, hence the hypothesis was supported. In lieu with other researches, it was determined that shift workers have their own coping strategies to deal with their problem and when it results to successful coping, it leads to restoration of physical and psychological well – being. When the coping skills are not adequate the stress may lead to negative physical and psychological well – being. The implications of Action Plan is that BPO Companies may develop and enhance trainings and development seminars and programs which involves Physical health activities, Psychological health programs and Coping Mechanism strategies to limit the problems encountered by shift workers.

  3. [The population's insurance protection as a mechanism responsible for provision of sanitary and epidemiological well-being].

    Science.gov (United States)

    Iarushin, S V

    2007-01-01

    The paper describes a principal scheme of insurance protection organization due to the negative human influences of environmental factors and industrial risks as one of the most effective mechanisms responsible for controlling sanitary-and-epidemiological well-being and human health. It also considers how a voluntary medical collective insurance program and a civil responsibility insurance one are being implemented due to unforeseen damages done to the population's health and how the quality and safety of goods (work, services) are controlled. Organizational, methodic, and normative legal approaches are proposed to developing the population's insurance protection system.

  4. QUANTUM MECHANICAL MODEL AND SIMULATION OF GaAs/AlGaAs QUANTUM WELL INFRARED PHOTODETECTOR-Ⅱ ELECTRICAL ASPECTS

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A complete quantum mechanical model for GaAs/AlGaAs quantum well infrared photodetectors(QWIPs) was presented. The photocurrent was investigated by the optical transition(absorption coefficient)between the ground state and the excited states due to the nonzero component of the radiation field along the sample growth direction. By studying the inter-diffusion of the Al atoms across the GaAs/AlGaAs heterointer faces, the mobility of the drift-diffusion carriers in the excited states was calculated. As a result, the measurement results of the dark current and the photocurrent spectra are explained theoretically.

  5. Well-Posedness of a fully coupled thermo-chemo-poroelastic system with applications to petroleum rock mechanics

    Directory of Open Access Journals (Sweden)

    Tetyana Malysheva

    2017-05-01

    Full Text Available We consider a system of fully coupled parabolic and elliptic equations constituting the general model of chemical thermo-poroelasticity for a fluid-saturated porous media. The main result of this paper is the developed well-posedness theory for the corresponding initial-boundary problem arising from petroleum rock mechanics applications. Using the proposed pseudo-decoupling method, we establish, subject to some natural assumptions imposed on matrices of diffusion coefficients, the existence, uniqueness, and continuous dependence on initial and boundary data of a weak solution to the problem. Numerical experiments confirm the applicability of the obtained well-posedness results for thermo-chemo-poroelastic models with real-data parameters.

  6. Nano-chemo-mechanical signature of conventional oil-well cement systems: Effects of elevated temperature and curing time

    Energy Technology Data Exchange (ETDEWEB)

    Krakowiak, Konrad J., E-mail: kjkrak@mit.edu [Civil and Environmental Engineering Department, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139-4307 (United States); Thomas, Jeffrey J., E-mail: JThomas39@slb.com [Schlumberger-Doll Research Center, 1 Hampshire St., Cambridge, MA 02139-1578 (United States); Musso, Simone, E-mail: SMusso@slb.com [Schlumberger-Doll Research Center, 1 Hampshire St., Cambridge, MA 02139-1578 (United States); James, Simon, E-mail: james6@slb.com [Schlumberger Riboud Product Center, 1 rue Henri Becquerel, Clamart 92140 (France); Akono, Ange-Therese, E-mail: aakono@illinois.edu [Civil and Environmental Engineering Department, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139-4307 (United States); Ulm, Franz-Josef, E-mail: ulm@mit.edu [Civil and Environmental Engineering Department, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139-4307 (United States)

    2015-01-15

    With ever more challenging (T,p) environments for cementing applications in oil and gas wells, there is a need to identify the fundamental mechanisms of fracture resistant oil well cements. We report results from a multi-technique investigation of behavior and properties of API class G cement and silica-enriched cement systems subjected to hydrothermal curing from 30 °C to 200 °C; including electron probe microanalysis, X-ray diffraction, thermogravimetry analysis, electron microscopy, neutron scattering (SANS), and fracture scratch testing. The results provide a new insight into the link between system chemistry, micro-texture and micro-fracture toughness. We suggest that the strong correlation found between chemically modulated specific surface and fracture resistance can explain the drop in fracture properties of neat oil-well cements at elevated temperatures; the fracture property enhancement in silica-rich cement systems, between 110° and 175 °C; and the drop in fracture properties of such systems through prolonged curing over 1 year at 200 °C.

  7. Investigating Arsenic Mobilization Mechanisms as well as Complexation Between Arsenic and Polysulfides Associated With a Bangladeshi Rice Paddy

    Science.gov (United States)

    Lin, T.; Kampalath, R.; Jay, J.

    2009-12-01

    The presence of arsenic in the groundwater has led to the largest environmental poisoning in history. Although it is a worldwide issue that affects numerous countries, including Taiwan, Bangladesh, India, China, Mexico, Peru, Australia, and the United States, the issue is of greatest concern in the West Bengal region. In the Ganges Delta, as many as 2 million people are diagnosed with arsenicosis each year. The World Health Organization (WHO) estimates 200,000 to 270,000 arsenic-induced cancer-related deaths in Bangladesh alone. More than 100 million people in the country consume groundwater that exceeds the WHO limit as 50% of the 8 million wells contain groundwater with more than 10 μg/L. Despite the tragic public health implications of this problem, we do not yet have a complete answer to the question of why dissolved arsenic concentrations are so high in the groundwater of the Ganges Delta. Since 1999, we have been intensively studying a field site in Munshiganj, Bangladesh with extremely high levels of arsenic in groundwater (up to 1.2 mg/L). Sediment cores were collected from two locations at the field site: 1) the rice paddy and 2) edge of a nearby irrigation pond. Recharge from irrigation ponds have recently been hypothesized to be an important site of arsenic mobilization. Recent work has proposed mineral dissolution under phosphorus-limited conditions as an important mechanism for arsenic mobilization. Using microcosms with paddy and pond sediment, we are comparing arsenic release via this mechanism with that resulting from reduction of iron hydroxides at our site. Concurrently, we are looking at enhanced solubility of As in the presence of polysulfides as the effects of elemental sulfur on As solubility have not been well researched. We hypothesize that the presence of elemental sulfur, and consequent formation of polysulfides, will substantially increase the solubility of orpiment in sulfidic water and that sorption of these complexes will

  8. Radiative recombination mechanisms in polar and non-polar InGaN/GaN quantum well LED structures

    Science.gov (United States)

    Badcock, T. J.; Ali, M.; Zhu, T.; Pristovsek, M.; Oliver, R. A.; Shields, A. J.

    2016-10-01

    We study the photoluminescence internal quantum efficiency (IQE) and recombination dynamics in a pair of polar and non-polar InGaN/GaN quantum well (QW) light-emitting diode (LED) structures as a function of excess carrier density and temperature. In the polar LED at 293 K, the variation of radiative and non-radiative lifetimes is well described by a modified ABC type model which accounts for the background carrier concentration in the QWs due to unintentional doping. As the temperature is reduced, the sensitivity of the radiative lifetime to excess carrier density becomes progressively weaker. We attribute this behaviour to the reduced mobility of the localised electrons and holes at low temperatures, resulting in a more monomolecular like radiative process. Thus we propose that in polar QWs, the degree of carrier localisation determines the sensitivity of the radiative lifetime to the excess carrier density. In the non-polar LED, the radiative lifetime is independent of excitation density at room temperature, consistent with a wholly excitonic recombination mechanism. These findings have significance for the interpretation of LED efficiency data within the context of the ABC recombination model.

  9. Effectiveness of ketogenic diet in pentylenetetrazol-induced and kindling rats as well as its potential mechanisms.

    Science.gov (United States)

    Wang, Shan; Ding, Yao; Ding, Xiao-Yan; Liu, Zhi-Rong; Shen, Chun-Hong; Jin, Bo; Guo, Yi; Wang, Shuang; Ding, Mei-Ping

    2016-02-12

    The effects and mechanisms of ketogenic diets (KD) are unclear. In this study, we aimed to reveal electrographic and behavioral thresholds in responses to the KD in pentylenetetrazol (PTZ)-induced seizures, as well as its antiepileptogenic effects on PTZ-kindling rats. Additionally, we investigated the potential link between KD and expression levels of two cation chloride co-transporters: K(+)-Cl(-) co-transporter 2 (KCC2) and Na(+)-K(+)-Cl(-) co-transporter 1 (NKCC1). The KD group had significantly higher electrographic thresholds than the control (ND) group for the first spike-and-wave, subcontinuous spike-and-wave, high amplitude spike-and-wave, and polyspikes both in the cortex and hippocampus. Compared to the ND group, the KD group had higher behavioral thresholds for behavioral absence, first jerk, first overt myoclonia, and generalized seizures. In the PTZ-kindling model, KD not only prolonged the latency of myoclonic and clonic convulsions, but shortened clonic and generalized duration. In addition, KD rats had higher KCC2 protein expression before kindling, during myoclonic jerks, and GTCS compared with ND rats. There were no significant differences in NKCC1 protein levels between both groups following the four-week dietary intervention without PTZ exposure (before kindling). Moreover, KD inhibited the upregulation of NKCC1 expression induced by kindling in myoclonic jerks and GTCS. Therefore, our findings demonstrated that KD had antiepileptic features in elevating thresholds to most electrographic and behavioral seizure patterns in PTZ-induced rats, as well as delaying the progression and alleviating the severity of seizure in PTZ-kindling model. The antiepileptogenic effects of KD may be attributed to its regulatory properties on KCC2 and NKCC1 protein expression.

  10. Preparation, formation mechanism and photoelectric properties of well-aligned CuSbS{sub 2} nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Shi, Liang, E-mail: sliang@ustc.edu.cn; Li, Yanan; Wu, Chunyan; Dai, Yumei

    2015-11-05

    Well-aligned CuSbS{sub 2} single crystalline nanowires array has been prepared via a solvothermal synthetic route. The as-prepared CuSbS{sub 2} nanowires are uniform with a growth direction perpendicular to the (101) planes. Porous anodic aluminum oxide was used as a morphology directing template and was found to play a significant role for the formation of single crystalline CuSbS{sub 2} nanowires. Thin film prepared from CuSbS{sub 2} nanowires displayed an obvious photoelectric response, suggesting its potential application as a low cost solar absorber material. A possible formation mechanism for the single crystalline CuSbS{sub 2} nanowires array is proposed. The structure, morphology, composition and optical absorption properties of the as-prepared CuSbS{sub 2} nanowires were characterized using X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectrometry and UV–Vis spectrophotometry. - Highlights: • Uniform CuSbS{sub 2} single crystalline nanowires array has been synthesized. • The bandgap of the as-prepared CuSbS{sub 2} nanowires is 1.45 eV. • CuSbS{sub 2} nanowires displayed an obvious photoelectric response. • The growth direction of CuSbS{sub 2} nanowires is perpendicular to (101) planes.

  11. The infinite well and Dirac delta function potentials as pedagogical, mathematical and physical models in quantum mechanics

    Science.gov (United States)

    Belloni, M.; Robinett, R. W.

    2014-07-01

    The infinite square well and the attractive Dirac delta function potentials are arguably two of the most widely used models of one-dimensional bound-state systems in quantum mechanics. These models frequently appear in the research literature and are staples in the teaching of quantum theory on all levels. We review the history, mathematical properties, and visualization of these models, their many variations, and their applications to physical systems. For the ISW and the attractive DDF potentials, Eq. (4) implies, as expected, that energy eigenfunctions will have a kink-a discontinuous first derivative at the location of the infinite jump(s) in the potentials. However, the large |p| behavior of the momentum-space energy eigenfunction given by Eq. (5) will be |ϕ(p)|∝1/p2. Therefore for the ISW and the attractive DDF potentials, expectation value of p will be finite, but even powers of p higher than 2 will not lead to convergent integrals. This analysis proves that despite the kinks in the ISW and attractive DDF eigenfunctions, is finite, and therefore yield appropriate solutions to the Schrödinger equation.The existence of power-law ‘tails’ of a momentum distribution as indicated in Eq. (5) in the case of ‘less than perfect’ potentials [41], including a 1/p2 power-law dependence for a singular potential (such as the DDF form) may seem a mathematical artifact, but we note two explicit realizations of exactly this type of behavior in well-studied quantum systems.As noted below (in Section 6.2) the momentum-space energy eigenfunction of the ground state of one of the most familiar (and singular) potentials, namely that of the Coulomb problem, is given by ϕ1,0,0(p)=√{8p0/π}p0/2 where p0=ħ/a0 with a0 the Bohr radius. This prediction for the p-dependence of the hydrogen ground state momentum-space distribution was verified by Weigold [42] and collaborators with measurements taken out to p-values beyond 1.4p0; well out onto the power-law

  12. Determination of mechanical damage from wells under oil and gas flow condition; Determinacao de dano mecanico em pocos sob condicao de escoamento de oleo e gas

    Energy Technology Data Exchange (ETDEWEB)

    Marques, J. B.D. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Trevisan, O. V. [Universidade Estadual de Campinas (UNICAMP), SP (Brazil)

    2008-07-01

    The well bore effect is one of the most difficult variables obtained from well test analysis under two-phase condition. The presence of the gas in a well inserted in reservoir, which operates under gas drive solution, hinders the development of the analytical model to determine the mechanical damage. It is one of the reasons of the using the single phase well test analysis methodologies become suitable to the multiphase cases. The determination of the well bore effect is justified; therefore it is possible to work over in the well in order to determinate the real potential productive. The main objective of this work is to reevaluate a method of determination of the mechanical damage gotten from a well test under two-phase condition. In this work a simplified model of reservoir simulation is constructed in a commercial simulator in order to validate the methodology. The refinement of the blocks near to the well adopted in the simulation is a good representation of the well mechanical damage which occurs in a homogeneous reservoir. The types of well test analysis used in this work are two: drawdown and buildup test. The results gotten for this methodology, as will be shown, are excellent quality and the model of simulation presented here can be used for other analytical methods studies in order to determinate the mechanical damage or other variable of the reservoir. (author)

  13. The mechanisms for linear polarization loss of in-plane photoluminescence of InGaAs/GaAs quantum well and quantum dot structures

    NARCIS (Netherlands)

    Aleshkin, VY; Zvonkov, BN; Malkina, IG; Chernov, AL; Romanov, YA

    1999-01-01

    The mechanisms for linear polarization loss of photoluminescence from quantum wells and quantum dots in InGaAs/GaAs structures observed from cleavages have been investigated. It is found that the mechanisms for polarization loss of in-plane photoluminescence are different for OD and 2D hole states.

  14. [Advances of the mechanism study on berberine in the control of blood glucose and lipid as well as metabolism disorders].

    Science.gov (United States)

    Shen, Ning; Li, Cai-Na; Huan, Yi; Shen, Zhu-Fang

    2010-06-01

    Berberine, an isoquinoline alkaloid isolated from some Chinese medicinal herbs such as Coptidis rhizoma, has been used for the treatment of diarrhea and other gastrointestinal infections as an antibacterial drug in Chinese medicine. In recent years, it was reported to have beneficial effects on the metabolism disorders states of diabetes. The mechanisms involve many aspects of the diabetes, including regulating the blood cholesterol and triglyceride, lowering blood glucose, ameliorating the insulin resistant state and influencing the function of the pancreatic beta cell.

  15. Scattering mechanisms of highest-mobility InAs /AlxGa1 -xSb quantum wells

    Science.gov (United States)

    Tschirky, T.; Mueller, S.; Lehner, Ch. A.; Fält, S.; Ihn, T.; Ensslin, K.; Wegscheider, W.

    2017-03-01

    We study molecular beam epitaxially grown undoped AlxGa1 -xSb /InAs/AlSb quantum wells with different buffer and barrier designs and varying quantum well width. The highest mobilities were achieved with Al0.33Ga0.67Sb buffers and lower barriers and a quantum well width of 24 nm. These quasi-single-interface InAs/AlSb quantum well devices reached a gate-tuned mobility of 2.4 ×106cm2 /V s at a density of 1 ×1012cm-2 and 1.3 K. In Hall bar devices boundary scattering is found to strongly influence the mobility determination in this mobility regime. Ionized background impurity scattering at low electron densities, device boundary scattering at intermediate electron densities, and intersubband scattering at high electron densities were identified as the most likely dominant scattering processes. Ringlike structures in the Landau fan can be explained using a single-particle model of crossing Landau levels.

  16. Mechanical and chemical processes affecting the chalk during burial, insights from combined reflection seismics, well data and field work

    DEFF Research Database (Denmark)

    Moreau, Julien; Boussaha, Myriam; Thibault, Nicolas Rudolph;

    2014-01-01

    and cores analyses, respectively.However, few sites allow to combine all the different scale of observation for chalk diagenesis. Onshore and offshore high resolution seismics, two fully cored >350 m wells with wireline logging tools and very high quality exposures from a coastal cliff and a quarry form...

  17. EPR and EOM studies in well samples from some Venezuelan oil fields: possible mechanisms of magnetic authigenesis

    Science.gov (United States)

    Aldana, M.; Díaz, M.; Costanzo-Alvarez, V.; Jiménez, S. M.; Sequera, P.

    2003-04-01

    In the last few years we have conducted Electron Paramagnetic Resonance (EPR) and Magnetic Susceptibility (MS) studies in drilling fines, from near-surface levels, from producer and non-producer wells. These studies were aimed at examining a possible causal relationship between magnetic contrasts and underlying hydrocarbons. In this work we have extended these studies to some new wells, trying to identify the possible origin (microbial and/or thermochemical) of the observed anomalies. Together with EPR and MS studies, quantification of extractable organic matter (EOM) has been also performed. The samples were pulverized and split into two aliquots. One aliquot was treated with chloroform in order to separate de EOM and obtain the sample without EOM and the EOM itself. The other aliquot was not solvent extracted. The EOM was quantified and EPR measurements were performed on both aliquots in order to determine the organic matter free radical concentration (OMFRC). The treatments performed allow identifying whether the OMFRC belongs to the EOM or to the total organic matter (TOM). Asphaltenes tend to be the major components in highly biodegraded crude oils. Then the presence of OMFRC belonging to the TOM or to the EOM could indicate a possible microbial or thermochemical origin, respectively, of the detected MS anomalies. We have found OMFRC and EOM anomalies only at the producer wells, in the same zone where MS anomalies, associated with the presence of spherical aggregates of magnetic minerals, were observed. For some of these wells our results indicate the solely presence of free radicals of kerogen at OMFRC anomalous level. In fact, the EOM of these wells has no EPR signal and precipitation of asphaltene in n-heptane was not observed. In other instances, free radicals of kerogen and asphaltenes and precipitation of asphaltene from the EOM in n-heptane was observed. In the former case we suggest the existence of a reducing zone where thermochemical conditions are

  18. Mechanical and chemical processes affecting the chalk during burial, insights from combined reflection seismics, well data and field work

    DEFF Research Database (Denmark)

    Moreau, Julien; Boussaha, Myriam; Thibault, Nicolas Rudolph

    2014-01-01

    and cores analyses, respectively.However, few sites allow to combine all the different scale of observation for chalk diagenesis. Onshore and offshore high resolution seismics, two fully cored >350 m wells with wireline logging tools and very high quality exposures from a coastal cliff and a quarry form...... works have been performed with astronomical calibration based on stable isotope stratigraphy, wireline logs as well as several palaeontological proxies and detailed sedimentological analysis. Since a couple of decades, a specific kind of fractures has been described in the Chalk of Denmark, the so......-called hairline fractures. They have recently been interpreted as compaction bands associated with the pore collapse of the chalk. We have observed these fractures on the field and on the cores in specific intervals. At depth, these fractures are in genetic relation with the formation of some stylolithes...

  19. Underlying mechanisms for normal heat transport in one-dimensional anharmonic oscillator systems with a double-well interparticle interaction

    Science.gov (United States)

    Xiong, Daxing

    2016-04-01

    Previous studies have suggested a crossover from superdiffusive to normal heat transport in one-dimensional (1D) anharmonic oscillator systems with a double-well type interatomic interaction like V(ξ )=-{ξ2}/2+{ξ4}/4 , when the system temperature is varied. In order to better understand this unusual manner of thermal transport, here we perform a direct dynamics simulation to examine how the spreading processes of the three physical quantities, i.e. the heat, the total energy and the momentum, would depend on temperature. We find three main points that are worth noting. (i) The crossover from superdiffusive to normal heat transport is well verified from a new perspective of heat spread. (ii) The spreading of the total energy is found to be very distinct from heat diffusion, especially under some temperature regimes, energy is strongly localized, while heat can be superdiffusive. So one should take care to derive a general connection between the heat conduction and energy diffusion. (iii) In a narrow range of temperatures, the spreading of momentum implies clear unusual non-ballistic behaviors; however, such unusual transport of momentum cannot be directly related to the normal transport of heat. An analysis of phonon spectra suggests that one should also take the effects of phonon softening into account. All of these results may provide insights into establishing the connection between the macroscopic heat transport and the underlying dynamics in 1D systems.

  20. Experimental Study and Stabilization Mechanisms of Silica Nanoparticles Based Brine Mud with High Temperature Resistance for Horizontal Shale Gas Wells

    Directory of Open Access Journals (Sweden)

    Xian-yu Yang

    2015-01-01

    Full Text Available Previous studies showed that silica nanoparticles based fresh water drilling muds had good thermal stability up to 160°C; however its performance at high salt concentration was rather poor. Therefore, high performance silica nanoparticles based brine mud (NPBMs with high temperature resistance for horizontal shale gas wells was proposed. Thermal stability tests from ambient temperature to 180°C, along with pressure transmission tests and rheology analysis, were performed to evaluate comprehensive properties of the NPBMs. Results show that the NPBMs embody excellent salt tolerance and thermal resistance for their rheological parameters did not suffer significant fluctuation. Fluid loss of the NPBM-1 (4% NaCl plus 3% KCl at 180°C was only 7.6 mL while the NPBM-2 (10% NaCl plus 3% KCl had a fluid loss of 6.6 mL at 150°C. Low water activity and good lubricity of the NPBMs were beneficial to improve wellbore stability and reduce friction resistance. Pressure transmission tests on the NPBM-1 show that it can mitigate or even prevent the transmission of drilling mud pressure into shale thus improving wellbore stability. Additionally, optimal rheological models for the NPBM-1 and the NPBM-2 were Herschel-Bulkley model and Power Law model separately.

  1. Custom titanium sleeve for surgical treatment of mechanically assisted crevice corrosion in the well-fixed, noncontemporary stem in total hip arthroplasty

    Directory of Open Access Journals (Sweden)

    Thomas Leibiger

    2015-12-01

    Full Text Available Adverse local tissue reaction associated with total hip replacement may occur when mechanically assisted crevice corrosion occurs at metal-metal modular junctions in which at least one of the components is fabricated from cobalt-chromium alloy. Complete removal of components may be associated with significant morbidity; when components are well fixed and in acceptable position, it may be appropriate to consider modular rather than complete revision. We have diagnosed mechanically assisted crevice corrosion in total hip arthroplasty patients with noncontemporary but well-fixed femoral components and found that modular conversion to a ceramic femoral head to remove a source of CoCr corrosion and fretting products was only possible by having a custom titanium sleeve manufactured. Surgical implantation with a revision style Biolox ceramic head (CeramTec, Plochingen, Germany was then achieved.

  2. Formation and destruction mechanism as well as major controlling factors of the Silurian shale gas overpressure in the Sichuan Basin, China

    Directory of Open Access Journals (Sweden)

    Shuangjian Li

    2016-08-01

    Full Text Available Taking the Well JY1 and Well PY1 in the Eastern Sichuan Basin as examples, the formation mechanism of shale gas overpressure was studied by using the cross plot of acoustic versus density logging data. During the processes of hydrocarbon generation and the uplifting, the pressure evolution of fluids in shale gas layers was reconstructed by fluid inclusions and PVTSIM software. The major factors controlling the evolution of shale gas overpressure were established according to the study of fracture, the timing of the uplifting, and episodes of tectonic deformation. Our results showed that the main mechanism of overpressure in the Silurian shale gas reservoirs in the Sichuan Basin was the fluid expansion, which was caused by hydrocarbon generation. Since the Yanshanian, the strata were uplifted and fluid pressure generally showed a decreasing trend. However, due to the low compression rebound ratio of shale gas reservoir rocks, poor connectivity of reservoir rocks, and low content of formation water and so on, such factors made fluid pressure decrease, but these would not be enough to make up the effects of strata erosion resulting in a further increase in fluid pressure in shale gas reservoirs during the whole uplifting processes. Since the Yanshanian, the Well PY1 zone had been reconstructed by at least three episodes of tectonic movement. The initial timing of the uplifting is 130 Ma. Compared to the former, the Well JY1 zone was firstly uplifted at 90 Ma, which was weakly reconstructed. As a result, low-angle fractures and few high resistance fractures developed in the Well JY1, while high-angle fractures and many high resistance fractures developed in the Well PY1. In totality, the factors controlling the overpressure preservation in shale gas reservoirs during the late periods include timing of late uplifting, superposition and reconstruction of stress fields, and development of high-angle fractures.

  3. Geophysical Logs, Specific Capacity, and Water Quality of Four Wells at Rogers Mechanical (former Tate Andale) Property, North Penn Area 6 Superfund Site, Lansdale, Pennsylvania, 2006-07

    Science.gov (United States)

    Senior, Lisa A.; Bird, Philip H.

    2010-01-01

    As part of technical assistance to the U.S. Environmental Protection Agency (USEPA) in the remediation of properties on the North Penn Area 6 Superfund Site in Lansdale, Pa., the U.S. Geological Survey (USGS) in 2006-07 collected data in four monitor wells at the Rogers Mechanical (former Tate Andale) property. During this period, USGS collected and analyzed borehole geophysical and video logs of three new monitor wells (Rogers 4, Rogers 5, and Rogers 6) ranging in depth from 80 to 180 feet, a borehole video log and additional heatpulse-flowmeter measurements (to quantify vertical borehole flow) in one existing 100-foot deep well (Rogers 3S), and water-level data during development of two wells (Rogers 5 and Rogers 6) to determine specific capacity. USGS also summarized results of passive-diffusion bag sampling for volatile organic compounds (VOCs) in the four wells. These data were intended to help understand the groundwater system and the distribution of VOC contaminants in groundwater at the property.

  4. QUANTUM MECHANICAL MODEL AND SIMULATION OF GaAs/AlGaAs QUANTUM WELL INFRARED PHOTO-DETECTOR-Ⅰ OPTICAL ASPECTS

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A complete quantum mechanical model for GaAs/AlGaAs quantum well infrared photodetectors(QWIPs) is presented here. The model consisted of four parts: (1) Starting with the description of the electromagnetic field of the infrared radiation in the QWIP, effective component of the vector potential 〈|Az|〉 along the QWIP growth direction (z-axis) due to the optical diffraction grating was calculated. (2) From the wave transmissions and the occupations of the electronic states, it was discussed that the dark current in the QWIP is determined by the drift-diffusion current of carriers thermally excited from the ground sublevel in the quantum well to extended states above the barrier. (3) The photocurrent was investigated by the optical transition (absorption coefficient between the ground state to excited states due to the nonzero-〈|Az|〉 ). (4) By studying the inter-diffusion of the Al atoms across the GaAs/AlGaAs heterointerfaces,the mobility of the drift-diffusion carriers in the excited states was calculated, so the measurement results of the dark current and photocurrent spectra can be explained theoretically. With the complete quantum mechanical descriptions of (1-4), QWIP device design and optimization are possible.

  5. Promising Diabetes Therapy Based on the Molecular Mechanism for Glucose Toxicity: Usefulness of SGLT2 Inhibitors as well as Incretin-Related Drugs.

    Science.gov (United States)

    Kaneto, Hideaki; Obata, Atsushi; Shimoda, Masashi; Kimura, Tomohiko; Hirukawa, Hidenori; Okauchi, Seizo; Matsuoka, Taka-Aki; Kaku, Kohei

    2016-01-01

    Pancreatic β-cell dysfunction and insulin resistance are the main characteristics of type 2 diabetes. Chronic exposure of β-cells to hyperglycemia leads to the deterioration of β-cell function. Such phenomena are well known as pancreatic β-cell glucose toxicity. MafA, a strong transactivator of insulin gene, is particularly important for the maintenance of mature β-cell function, but its expression level is significantly reduced under diabetic conditions which is likely associated with β-cell failure. Reduction of incretin receptor expression level in β-cells in diabetes is also likely associated with β-cell failure. On the other hand, incretin-related drugs and sodium-glucose co-transporter 2 (SGLT2) inhibitors are promising diabetes therapy based on the mechanism for pancreatic β-cell glucose toxicity. Indeed, it was shown that incretin-related drugs exerted protective effects on β-cells through the augmentation of IRS-2 expression especially in the presence of pioglitazone. It was also shown that incretin-related drug and/or pioglitazone exerted more protective effects on β-cells at the early stage of diabetes compared to the advanced stage. SGLT2 inhibitors, new hypoglycemic agents, also exert beneficial effects for the protection of pancreatic β-cells as well as for the reduction of insulin resistance in various insulin target tissues. Taken together, it is important to select appropriate therapy based on the molecular mechanism for glucose toxicity.

  6. Flow and Meaningfulness as Mechanisms of Change in Self-Concept and Well-Being Following a Songwriting Intervention for People in the Early Phase of Neurorehabilitation.

    Science.gov (United States)

    Baker, Felicity Anne; Rickard, Nikki; Tamplin, Jeanette; Roddy, Chantal

    2015-01-01

    Anecdotal evidence suggests that songwriting assists people with spinal cord injury (SCI) or acquired brain injury (ABI) to explore threats to self-concept, yet studies that explore the mechanisms of change have not been reported. In a pilot study, we explored the correlations between changes in self-concept and well-being, with mechanisms of flow and meaningfulness of songwriting. Five people with ABI (all male) and 5 SCI (4 males, 1 female) (mean age 38.90 years, SD = 13.21), with an average 3 months post-injury, participated in a 12-session songwriting program that targeted examination of self-concept. Measures of self-concept, depression, anxiety, emotion regulation, affect, satisfaction with life, and flourishing were collected pre-, mid-, and post-intervention, and compared with repeated measures of flow and meaningfulness of songwriting. Medium effects were found for changes in self-concept (d = 0.557) and depression (d = 0.682) and approached a medium effect for negative affect (d = 0.491). Improvements in self-concept over time were associated with decreases in depression (r p = -0.874, n = 9, p positive affect (r p = + 0.731, n = 10, p positively correlated with positive changes to self-concept and well-being, whereas deriving high levels of meaning were associated with increased negative affect (r p = +0.68 p positively associated with enhanced well-being outcomes. However, the findings also suggest that people who find the songwriting process has strong meaning for them might be more likely to start accepting their emotions and as a result experience an increase in anxiety and depression, although full, mediated regression analyses with larger sample sizes are required to explore this further. Acknowledging their changed circumstances may nonetheless assist people with SCI and ABI to grieve their losses and facilitate the building of a healthy post-injured self-concept. We propose that there may be other

  7. Nanoscale effects on the thermal and mechanical properties of AlGaAs/GaAs quantum well laser diodes: influence on the catastrophic optical damage

    Science.gov (United States)

    Souto, Jorge; Pura, José Luis; Jiménez, Juan

    2017-06-01

    In this work we study the catastrophic optical damage (COD) of graded-index separate confinement heterostructure quantum well (QW) laser diodes based on AlGaAs/GaAs. The emphasis is placed on the impact that the nanoscale physical properties have on the operation and degradation of the active layers of these devices. When these laser diodes run in continuous-wave mode with high internal optical power densities, the QW and guide layers can experiment very intense local heating phenomena that lead to device failure. A thermo-mechanical model has been set up to study the mechanism of degradation. This model has been solved by applying finite element methods. A variety of physical factors related to the materials properties, which play a paramount role in the laser degradation process, have been considered. Among these, the reduced thicknesses of the QW and the guides lead to thermal conductivities smaller than the bulk figures, which are further reduced as extended defects develop in these layers. This results in a progressively deteriorating thermal management in the device. To the best of our knowledge, this model for laser diodes is the first one to have taken into account low scale mechanical effects that result in enhanced strengths in the structural layers. Moreover, the consequences of these conflicting size-dependent properties on the thermo-mechanical behaviour on the route to COD are examined. Subsequently, this approach opens the possibility of taking advantage of these properties in order to design robust diode lasers (or other types of power devices) in a controlled manner.

  8. Exploration of the inhibiting effect of Notch-1 blocker on tumor growth in osteosarcoma mouse models as well as related molecular mechanisms

    Institute of Scientific and Technical Information of China (English)

    Bin Zhou; Wei-Chun Guo

    2016-01-01

    Objective:To explore the inhibiting effect of Notch-1 blocker on tumor growth in osteosarcoma mouse models as well as related molecular mechanisms.Methods: SCID mice were selected as experimental subjects, and osteosarcoma mouse models were built through subcutaneous injection of osteosarcoma cells and divided into GSI group and PBS group who received GSI and PBS intervention respectively. 0 d, 5 d, 10 d, 15 d and 20 d after intervention, tumor tissue volume was detected; 20 d after intervention, the contents of pro-apoptosis, pro-proliferation and invasion-related molecules in tumor tissue were detected.Results: On the 0 d of intervention, tumor volume of GSI group was not significantly different from that of PBS group; 5 d, 10 d, 15 d and 20 d after intervention, tumor volume of GSI group was significantly lower than that of PBS group; 20 d after intervention, the contents of pro-proliferation molecules AEG-1, Orai1, STIM1, PAK5, RIPK4 andβ-catenin as well as invasion-promoting molecules Gab2, DLK1, Scr and B7-H3 in tumor tissue of GSI group were significantly lower than those of PBS group, and the contents of pro-apoptosis molecules RanBP9, PD-1, PD-L1 and PD-L2 as well as invasion-inhibiting molecules TIMP1 and TIMP2 were significantly higher than those of PBS group.Conclusion:Notch-1 blocker can inhibit tumor growth in osteosarcoma mouse models, and the molecular mechanisms involved in the process include reducing the generation of pro-proliferation molecules and invasion-promoting molecules and increasing the generation of pro-apoptosis and invasion-inhibiting molecules.

  9. THE ANALYSIS OF MATHEMATICAL MODELS OF MECHANICAL SPEED OF DRIVING FOR OPTIMIZATION OF PROCESS OF DRILLING OF OIL AND GAS WELLS

    Directory of Open Access Journals (Sweden)

    Tsоuprikov A. A.

    2015-03-01

    Full Text Available The analysis of models is carried out from a definition position for system of optimum control of drilling of basic mathematical model on which calculation of optimum regime parameters is possible. The main equation for management of process of drilling of wells is the mathematical model of mechanical speed of a driving as function from axial load of a chisel, the speed of rotation of a chisel and a consumption of boring solution for cleaning of a well of destroyed breed. Key parameter is axial load of a chisel; graphically dependence of speed of drilling on loading has S appearance - a figurative curve of Bingham which has a convex mathematical extremum. In the article, domestic and foreign models of drilling are considered; their schedules according to skilled data of conducting of wells are constructed. Models are sedate, i.e. reflect only a linear site of a curve of Bingham, data of trade drilling is well approximated with initial and linear sites of curves. Thus, on them it is possible to make only rational management of process, and the optimum mode exists only on border of range of definition of function. Only the A.A. Pogarsky model is suitable for optimum control, having a mathematical maximum and S-shaped form of a curve. All models depend on two parameters of management – load of a chisel and speeds of rotation of a chisel and don't consider the third on influence on drilling speed parameter - a consumption of boring solution. Therefore, Pogarsky's model was finished by inclusion in it in an explicit form of a consumption of boring solution. Check of model by means of the regression analysis of skilled data of drilling from official reports of drilling foremen showed its reliability for 71-99%. The model allows carrying out optimum control of drilling in the "axial load of a chisel" parameter

  10. Particle swarm approach based on quantum mechanics and harmonic oscillator potential well for economic load dispatch with valve-point effects

    Energy Technology Data Exchange (ETDEWEB)

    Santos Coelho, Leandro dos [Pontifical Catholic University of Parana, PUCPR Industrial and Systems Engineering Graduate Program, PPGEPS, Imaculada Conceicao, 1155, Zip code 80215-901, Curitiba, PR (Brazil)], E-mail: leandro.coelho@pucpr.br; Mariani, Viviana Cocco [Pontifical Catholic University of Parana, PUCPR Mechanical Engineering Graduate Program, PPGEM, Imaculada Conceicao, 1155, Zip code 80215-901, Curitiba, PR (Brazil)], E-mail: viviana.mariani@pucpr.br

    2008-11-15

    Particle swarm optimization (PSO) algorithm is population-based heuristic global search algorithm inspired by social behavior patterns of organisms that live and interact within large groups. The PSO is based on researches on swarms such as fish schooling and bird flocking. Inspired by the classical PSO method and quantum mechanics theories, this work presents a quantum-inspired version of the PSO (QPSO) using the harmonic oscillator potential well (HQPSO) to solve economic dispatch problems. A 13-units test system with incremental fuel cost function that takes into account the valve-point loading effects is used to illustrate the effectiveness of the proposed HQPSO method compared with the simulation results based on the classical PSO, the QPSO, and other optimization algorithms reported in the literature.

  11. Particle swarm approach based on quantum mechanics and harmonic oscillator potential well for economic load dispatch with valve-point effects

    Energy Technology Data Exchange (ETDEWEB)

    dos Santos Coelho, Leandro [Pontifical Catholic University of Parana, PUCPR Industrial and Systems Engineering Graduate Program, PPGEPS, Imaculada Conceicao, 1155, Zip code 80215-901, Curitiba, PR (Brazil); Mariani, Viviana Cocco [Pontifical Catholic University of Parana, PUCPR Mechanical Engineering Graduate Program, PPGEM, Imaculada Conceicao, 1155, Zip code 80215-901, Curitiba, PR (Brazil)

    2008-11-15

    Particle swarm optimization (PSO) algorithm is population-based heuristic global search algorithm inspired by social behavior patterns of organisms that live and interact within large groups. The PSO is based on researches on swarms such as fish schooling and bird flocking. Inspired by the classical PSO method and quantum mechanics theories, this work presents a quantum-inspired version of the PSO (QPSO) using the harmonic oscillator potential well (HQPSO) to solve economic dispatch problems. A 13-units test system with incremental fuel cost function that takes into account the valve-point loading effects is used to illustrate the effectiveness of the proposed HQPSO method compared with the simulation results based on the classical PSO, the QPSO, and other optimization algorithms reported in the literature. (author)

  12. Hanford wells

    Energy Technology Data Exchange (ETDEWEB)

    McGhan, V.L.; Damschen, D.W.

    1977-06-01

    The Hanford Site contains about 2200 wells constructed from pre-Hanford Works days to the present. As of June 1977, about 1900 wells still exist, and about 850 of these existing wells were drilled to the ground-water table. About 700 of these wells (including about 24 farm wells) still contain water. The others have become dry through infiltration of sediments or a general lowering of the water table in their vicinity. This report, providing the most complete documentation of wells in and adjacent to the Hanford Site, supersedes all previous compilations of Hanford wells.

  13. The mechanical characteristics of hybridised MDF from empty fruit bunch as well as kenaf following ATH treating and prepared by pre-polymerisation method

    Science.gov (United States)

    Redwan, Amamer; Badri, Khairiah Haji; Bahrum, Azizah

    2016-11-01

    Within this research a new, hybridised MDF (that is; medium-density fibreboard) was manufactured with the use of EFB (that is; empty fruit bunch); KF (that is; kenaf) as well as palm-based `pre-PU' which were used as the binding agent. There is one ratio of hybrid MDF from EFB and KF was produced which is EFB: KF, 50:50 while the ATH percentage of the entire amount of the resin was 5, 10 and 15%. At magnitudes that varied from 300-500µm, the hybridised EFB-KF mix was then augmented with ATH. The result of the ATH on the mechanical nature of the hybridised material was then assessed. Findings indicate that the control-version of the hybridised MDF was not as strong, with regard to its mechanical characteristics, when contrasted to those that were augmented and improved with ATH. Direct proportionality could be seen with regard to the Shore D hardness to the volume of the ATH used, with the Shore D increasing (to an extent of 12% in the case of the ATH volume in the MDF being increased). Additionally, the well dispersion of the ATH within and throughout the PU matrix of the cause of the greater impact-strength, modulus of rupture (MOR) and modulus of elasticity (MOE) seen whose values were seen to be in accordance with the magnitude of the ATH included. More exactingly, ATH proportionally at 5, 10 and 15% saw a relational increase in impact-strength at 7, 12 and 25%, respectively speaking. The greatest boost in MOR was 14%, being attributed to the ATH content at 15%.

  14. TREATMENT OF HYDROCARBON, ORGANIC RESIDUE AND PRODUCTION CHEMICAL DAMAGE MECHANISMS THROUGH THE APPLICATION OF CARBON DIOXIDE IN NATURAL GAS STORAGE WELLS

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence J. Pekot

    2004-06-30

    Two gas storage fields were studied for this project. Overisel field, operated by Consumer's Energy, is located near the town of Holland, Michigan. Huntsman Storage Unit, operated by Kinder Morgan, is located in Cheyenne County, Nebraska near the town of Sidney. Wells in both fields experienced declining performance over several years of their annual injection/production cycle. In both fields, the presence of hydrocarbons, organic materials or production chemicals was suspected as the cause of progressive formation damage leading to the performance decline. Core specimens and several material samples were collected from these two natural gas storage reservoirs. Laboratory studies were performed to characterize the samples that were believed to be representative of a reservoir damage mechanism previously identified as arising from the presence of hydrocarbons, organic residues or production chemicals. A series of laboratory experiments were performed to identify the sample materials, use these materials to damage the flow capacity of the core specimens and then attempt to remove or reduce the induced damage using either carbon dioxide or a mixture of carbon dioxide and other chemicals. Results of the experiments showed that pure carbon dioxide was effective in restoring flow capacity to the core specimens in several different settings. However, in settings involving asphaltines as the damage mechanism, both pure carbon dioxide and mixtures of carbon dioxide and other chemicals provided little effectiveness in damage removal.

  15. Control Mechanism of Rock Burst in the Floor of Roadway Driven along Next Goaf in Thick Coal Seam with Large Obliquity Angle in Deep Well

    Directory of Open Access Journals (Sweden)

    Yunhai Cheng

    2015-01-01

    Full Text Available This paper deals with the theoretical aspects combined with stress analysis over the floor strata of coal seam and the calculation model for the stress on the coal floor. Basically, this research presents the relevant results obtained for the rock burst prevention in the floor of roadway driven along next goaf in the exploitation of thick coal seam with large obliquity in deep well and rock burst tendency. The control mechanism of rock burst in the roadway driven along next goaf is revealed in the present work. That is, the danger of rock burst can be removed by changing the stress environment for the energy accumulation of the floor and by reducing the impact on the roadway floor from the strong dynamic pressure. This result can be profitable being used at the design stage of appropriate position of roadway undergoing rock burst tendency in similar conditions. Based on the analysis regarding the control mechanism, this paper presents a novel approach to the prevention of rock burst in roadway floor under the above conditions. That is, the return airway is placed within the goaf of the upper working face that can prevent the rock burst effectively. And in this way, mining without coal pillar in the thick coal seam with large obliquity and large burial depth (over a thousand meters is realized. Practice also proves that the rock burst in the floor of roadway driven along next goaf is controlled and solved.

  16. Well Spacing for Horizontal Wells

    Directory of Open Access Journals (Sweden)

    C.D.S. Keuengoua

    2011-06-01

    Full Text Available In the developing phase of a hydrocarbon reservoir and planning for drilling the production wells, it is necessary to drill the wells in an appropriate spacing to achieve maximum economic revenues during the reservoir life span. Well spacing which is the real location and interrelationship between producing oil or gas wells in an oil field is an important parameter. It is determined for the maximum ultimate production of a given reservoir and should be taken in consideration during well planning to avoid drilling of unnecessary wells. This study presents the concept of drainage area on horizontal well and horizontal productivity indices with different equations and their applications. A user friendly Excel Spreadsheet program was developed to calculate the productivity values of horizontal wells using three major available productivity equations. Also, the developed spreadsheet program was used to evaluate the effect of well spacing on the productivities of horizontal wells using productivity index approach and drainage area concept. It also helps to review the comparison between vertical and horizontal wells spacing based on drainage area concept. This program was validated, and then was used to study the effect of horizontal well length on the ratio of horizontal well productivity to vertical well productivity. The results show that higher ratio of horizontal well productivity to vertical well productivity values are obtained with increase length of the horizontal well. It is a very useful tool for making decision about the application of well spacing for horizontal wells.

  17. Hanford wells

    Energy Technology Data Exchange (ETDEWEB)

    McGhan, V.L.

    1989-06-01

    The Site Characterization and Assessment Section of the Geosciences Department at Pacific Northwest Laboratory (PNL) has compiled a list of wells located on or near the Hanford Site. Information has been updated on wells existing from the days before construction of the Hanford Works to the present. This work was funded by the US Department of Energy (DOE). The list of wells will be used by DOE contractors who need condensed, tabular information on well location, construction, and completion dates. This report does not include data on lithologic logs and ground-water contamination. Moreover, the completeness of this list is limited because of new well construction and existing well modifications, which are continually under way. Despite these limitations, this list represents the most complete description possible of data pertaining to wells on or adjacent to the Hanford Site. 7 refs., 1 fig., 2 tabs.

  18. Collagen based film with well epithelial and stromal regeneration as corneal repair materials: Improving mechanical property by crosslinking with citric acid

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Xuan; Liu, Yang; Li, Weichang; Long, Kai; Wang, Lin; Liu, Sa; Wang, Yingjun [School of Materials Science and Engineering, South China University of Technology, Guangzhou (China); National Engineering Research Center for Tissue Restoration and Reconstruction, Guangzhou (China); Ren, Li, E-mail: psliren@scut.edu.cn [School of Materials Science and Engineering, South China University of Technology, Guangzhou (China); National Engineering Research Center for Tissue Restoration and Reconstruction, Guangzhou (China)

    2015-10-01

    Corneal disease can lead to vision loss. It has become the second greatest cause of blindness in the world, and keratoplasty is considered as an effective treatment method. This paper presents the crosslinked collagen (Col)–citric acid (CA) films developed by making use of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS). The results showed that the Col–CA films had necessary optical performance, water content. The collagenase resistance of CA crosslinked films was superior to that of EDC crosslinked films. And CA5 film (Col:CA:EDC:NHS = 60:3:10:10) had the best mechanical properties. Cell experiments showed that CA5 film was non-cytotoxic and human corneal epithelial cells could proliferate well on the films. Lamellar keratoplasty showed that the CA5 film could be sutured in the rabbit eyes and was epithelialized completely in about 10 days, and the transparency was restored quickly in 30 ± 5 days. No inflammation and corneal neovascularization were observed at 6 months. Corneal stroma had been repaired; stromal cells and neo-stroma could be seen in the area of operation from the hematoxylin–eosin stained histologic sections and anterior segment optical coherence tomography images. These results indicated that Col–CA films were highly promising biomaterials that could be used in corneal tissue engineering and a variety of other tissue engineering applications. - Highlights: • Adding different amounts of citric acid could change the properties of films. • The crosslinked films had better mechanical property than non-modified films. • Crosslinked collagen–citric acid films could tolerate suture during operation. • The films showed good ability of epithelial and stromal repair.

  19. Reliability, failure modes, and degradation mechanisms in high power single- and multi-mode InGaAs-AlGaAs strained quantum well lasers

    Science.gov (United States)

    Sin, Yongkun; Presser, Nathan; Lingley, Zachary; Brodie, Miles; Foran, Brendan; Moss, Steven C.

    2016-03-01

    High power single-mode (SM) and multi-mode (MM) InGaAs-AlGaAs strained quantum well (QW) lasers are critical components for both telecommunications and potential space satellite communications systems. However, little has been reported on failure modes of state-of-the-art SM InGaAs-AlGaAs strained QW lasers although it is crucial to understand failure modes and underlying degradation mechanisms in developing these lasers that meet lifetime requirements for space satellite systems, where extremely high reliability of these lasers is required. Our present study addresses the aforementioned issues by performing long-term life tests under different test conditions followed by failure mode analysis (FMA) and physics of failure investigation. We performed long-term accelerated life-tests on state-of-the-art SM and MM InGaAs-AlGaAs strained QW lasers under ACC (automatic current control) mode. Our life-tests have accumulated over 25,000 test hours for SM lasers and over 35,000 test hours for MM lasers. FMA was performed on failed SM lasers using electron beam induced current (EBIC). This technique allowed us to identify failure types by observing dark line defects. All the SM failures we studied showed catastrophic and sudden degradation and all of these failures were bulk failures. Our group previously reported that bulk failure or COBD (catastrophic optical bulk damage) is the dominant failure mode of MM InGaAs-AlGaAs strained QW lasers. To the best of our knowledge, this is the first report demonstrating that the dominant failure mode of both SM and MM InGaAs-AlGaAs strained QW lasers is the bulk failure. Since degradation mechanisms responsible for COBD are still not well understood, we also employed other techniques including focused ion beam (FIB) processing and high-resolution TEM to further study dark line defects and dislocations in post-aged SM and MM lasers. Our long-term life test results and FMA results are reported.

  20. Hanford wells

    Energy Technology Data Exchange (ETDEWEB)

    Chamness, M.A.; Merz, J.K.

    1993-08-01

    Records describing wells located on or near the Hanford Site have been maintained by Pacific Northwest Laboratory and the operating contractor, Westinghouse Hanford Company. In support of the Ground-Water Surveillance Project, portions of the data contained in these records have been compiled into the following report, which is intended to be used by those needing a condensed, tabular summary of well location and basic construction information. The wells listed in this report were constructed over a period of time spanning almost 70 years. Data included in this report were retrieved from the Hanford Envirorunental Information System (HEIS) database and supplemented with information not yet entered into HEIS. While considerable effort has been made to obtain the most accurate and complete tabulations possible of the Hanford Site wells, omissions and errors may exist. This document does not include data on lithologic logs, ground-water analyses, or specific well completion details.

  1. Militantly Well

    DEFF Research Database (Denmark)

    Vigh, Henrik Erdman

    2015-01-01

    futures that transcend conflict engagement and wartime suffering for young militiamen. It clarifies the positive prospects that are expected to lie beyond the known horrors of war. Though conflict and warfare may provide strange points of departure for talking about well-being, imaginaries of happiness...... stand out from a background of hardship and are talked about in both a quite concrete way, as a lack of insecurity, as well as in an abstract way, as realization of social being. However, for most of the people I talk to, happiness remains elusive and evades their desperate attempts to grasp it....... It appears, as such, simultaneously to be what life is most profoundly about, as well as the dimension of it that constantly seems to avoid capture....

  2. Liver Wellness

    Science.gov (United States)

    ... can cause the liver to swell and not work well. Prevention: Hepatitis A vaccination is the best way to prevent HAV. Other ways to stop the spread of HAV are: • Always washing your hands with soap and warm water immediately after using the bathroom ...

  3. Wellness Matters

    Science.gov (United States)

    Arteaga, Brenda

    2011-01-01

    Creating a healthier school in today's world of budget cuts and seemingly endless to-do lists is not only possible, but it is also imperative. Beyond the health implications, one of the most compelling reasons for creating healthier schools is that wellness serves as a power booster for learning. Numerous studies have documented what educators…

  4. Wellness Matters

    Science.gov (United States)

    Arteaga, Brenda

    2011-01-01

    Creating a healthier school in today's world of budget cuts and seemingly endless to-do lists is not only possible, but it is also imperative. Beyond the health implications, one of the most compelling reasons for creating healthier schools is that wellness serves as a power booster for learning. Numerous studies have documented what educators…

  5. Werable wellness

    DEFF Research Database (Denmark)

    Rozycki, Bartosz

    2015-01-01

    We live in a world full of rush and a ‘relaxed state of being’ might increasingly play a role in today’s fast paced society to overcome contemporary stress and related illnesses such as burn-outs. The Sleephones concept is a wearable wellness device that aims to support relaxation by combing music...

  6. A Study on the Casing Wear Mechanism in Highly-deviated Well Drilling%大斜度井中套管磨损机理研究

    Institute of Scientific and Technical Information of China (English)

    练章华; 于浩; 刘永辉; 林铁军; 张强

    2016-01-01

    针对套管在大斜度井中的磨损失效,首先开展了套管的磨损实验研究,根据Dawson和White提出的基于能量损失的线性磨损模型以及本文的实验数据,获得了钻杆接头与套管的磨损系数。建立了钻杆接头与套管磨损机理研究的有限元模型,通过任意拉格朗日欧拉自适应网格划分,在数值模拟过程中可以对套管磨损的节点进行“实时调整”,并对网格单元做光滑处理,不断更新钻柱接头与套管的接触关系,对钻进过程中套管磨损机理进行了研究。在磨损后套管结构形状研究的基础上,开展了套管剩余抗挤强度的数值模拟研究,得到了套管的最大磨损深度随时间的变化关系,建立了套管剩余抗挤强度与最大磨损深度的关系,进而可以预测套管在某一累积磨损时间内套管的最大磨损深度和套管的剩余强度,为磨损套管的安全性评价提供了理论依据。%Aimed at studying the wear failure in the drilling process of highly-deviated well,this paper firstly carried out casing wear experiment research. According to the liner casing wear model based on the energy loss suggested by Dawson R and White J,and the experiment,the joint-casing wear coefficient is obtained. The finite element model of casing wear mechanism research is constructed using ABAQUS software. This paper uses the re-development user subroutine and Arbitrary Lagrange-Euler mesh. In the process of numerical simulation,the location of the wear node can be adjusted timely,the mesh element is smoothed,and the contact relations between joint and casing is altered continuously,which all contribute to the study on casing wear mechanism. Based on the shape of worn casing,the numerical simulation research is carried out to determine the remaining collapse strength,as a result of which,the relationship between the maximum wear depth and wear time is obtained. On this basis,the exact relationship

  7. Mechanical Behavior Simulation of the Packer Rubber of Deep Gas Well%深层气井封隔器胶筒力学行为仿真

    Institute of Scientific and Technical Information of China (English)

    丁亮亮; 练章华; 彭建云; 张宝; 曾努; 马亚琴

    2012-01-01

    Taking the RTTS packer commonly used in deep gas well testing operation as the object of study, the ANSYS software was adopted to establish the mechanical model for analyzing the large deformation contact problem of packer rubber nonlinear material. The law of force and deformation of the rubber after setting was studied. The sensitivity analysis of the effect of various structural parameters and material parameters on packer sealability was conducted. The simulation analysis shows that the longer the rubber, and the smaller the rubber hardness, the easier the rubber is set; the thinner and longer the rubber thickness, the smaller the rubber friction factor and the larger the contact force between rubber and casing. It is necessary to point out that there exists a medium thickness for the rubber to set most easily and a rubber hardness for the maximum contact force between rubber and casing inner wall. With the increase of friction factor, the contact force between rubber and casing inner wall decreases and the friction force rises.%以深层气井测试作业过程中常用的RTTS封隔器为对象,采用ANSYS软件建立了封隔器胶筒非线性材料大变形接触问题的力学模型,开展了坐封后胶筒的受力与变形规律研究,并对影响封隔器密封性能的各种结构参数和材料参数进行了敏感性分析。分析结果表明,胶筒高度越高、胶筒硬度越小,越易坐封;胶筒厚度越小、胶筒高度越高、胶筒摩擦因数越小,胶筒与套管间接触力越大。需要特别指出的是,存在一个胶筒坐封最容易的中等厚度,存在一个胶筒与套管内壁接触力最大的胶筒硬度,随着摩擦因数的增大,胶筒与套管内壁间接触力减小,摩擦力增大。

  8. Mechanics

    CERN Document Server

    Hartog, J P Den

    1961-01-01

    First published over 40 years ago, this work has achieved the status of a classic among introductory texts on mechanics. Den Hartog is known for his lively, discursive and often witty presentations of all the fundamental material of both statics and dynamics (and considerable more advanced material) in new, original ways that provide students with insights into mechanical relationships that other books do not always succeed in conveying. On the other hand, the work is so replete with engineering applications and actual design problems that it is as valuable as a reference to the practicing e

  9. TREATMENT OF HYDROCARBON, ORGANIC RESIDUE AND PRODUCTION CHEMICAL DAMAGE MECHANISMS THROUGH THE APPLICATION OF CARBON DIOXIDE IN NATURAL GAS STORAGE WELLS

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence J. Pekot; Ron Himes

    2004-05-31

    Core specimens and several material samples were collected from two natural gas storage reservoirs. Laboratory studies were performed to characterize the samples that were believed to be representative of a reservoir damage mechanism previously identified as arising from the presence of hydrocarbons, organic residues or production chemicals. A series of laboratory experiments were performed to identify the sample materials, use these materials to damage the flow capacity of the core specimens and then attempt to remove or reduce the induced damage using either carbon dioxide or a mixture of carbon dioxide and other chemicals. Results of the experiments showed that pure carbon dioxide was effective in restoring flow capacity to the core specimens in several different settings. However, in settings involving asphaltines as the damage mechanism, both pure carbon dioxide and mixtures of carbon dioxide and other chemicals provided little effectiveness in damage removal.

  10. A well-defined silica-supported aluminium alkyl through an unprecedented, consecutive two-step protonolysis–alkyl transfer mechanism

    KAUST Repository

    Pelletier, Jérémie

    2011-01-01

    Impregnation of [(AliBu3)(Et2O)] on partially dehydroxylated SBA-15 affords a mesoporous material bearing the well-defined single site surface aluminium species [(≡SiO)2Al(iBu)(Et 2O)]. © The Royal Society of Chemistry.

  11. Experimental Approach To Elucidating Damage Mechanisms In Cement-Well Casting-Host Rock Settings For Underground Storage of CO2

    Science.gov (United States)

    Li, C.; Jafari Azad, V.; Rodriguez, D.; Ideker, J.; Isgor, B.; Verba, C.

    2014-12-01

    During CO2 sequestration, wellbore cement could be vulnerable to high temperature and high pressure in underground storage settings. Wellbore alteration has been observed under supercritical CO2 exposure condition in previous experimental and field studies. One such study also showed that a reduction in both tensile and compressive strength when specimens were exposed to CO2-O2 gases at 50°C and 85°C as compared to specimens only exposed to CO2 gases; secondary mineral precipitation (SMP) and high temperature was speculated as the causes. In this study, experiments were designed to justify how different variables influenced SMP, and to quantify its effect on mechanical properties of Class H Portland cement. Chemical and mechanical alterations of Class H cement were investigated to verify the impact of SMP during this process. Cement prisms were investigated under different scenarios including influence of brine composition (simulated Mt. Simon basin), high temperature (up to 85 °C); high pressure (up to 4200psi); CO2 sequestration; CO2-O2 co-sequestration. Modulus of rupture and compressive strength of the cement prisms were tested under each scenario and several exposure durations. Initial results indicated that high temperature and synthetic brine composition had a negative influence on compressive strength. Pore solution analysis was conducted to examine the ionic exchange and geochemical alteration between the cement and brine. Specimens decreased in sodium and potassium, significantly increased in calcium, and slightly increased in sulfate after CO2 injected into system. Scanning electronic microscopy visually identified SMP and the alteration depth of specimens exposed to CO2 gas and CO2-O2 gases with time of exposure, respectively. The predicted degree of SMP, change of pore solution, and mechanic strength based on temperature, pressure, brine composition, and gas exposure conditions will be presented.

  12. Mechanics

    CERN Document Server

    Chester, W

    1979-01-01

    When I began to write this book, I originally had in mind the needs of university students in their first year. May aim was to keep the mathematics simple. No advanced techniques are used and there are no complicated applications. The emphasis is on an understanding of the basic ideas and problems which require expertise but do not contribute to this understanding are not discussed. How­ ever, the presentation is more sophisticated than might be considered appropri­ ate for someone with no previous knowledge of the subject so that, although it is developed from the beginning, some previous acquaintance with the elements of the subject would be an advantage. In addition, some familiarity with element­ ary calculus is assumed but not with the elementary theory of differential equations, although knowledge of the latter would again be an advantage. It is my opinion that mechanics is best introduced through the motion of a particle, with rigid body problems left until the subject is more fully developed. Howev...

  13. Degradation mechanisms in high-power multi-mode InGaAs-AlGaAs strained quantum well lasers for high-reliability applications

    Science.gov (United States)

    Sin, Yongkun; Presser, Nathan; Brodie, Miles; Lingley, Zachary; Foran, Brendan; Moss, Steven C.

    2015-03-01

    Laser diode manufacturers perform accelerated multi-cell lifetests to estimate lifetimes of lasers using an empirical model. Since state-of-the-art laser diodes typically require a long period of latency before they degrade, significant amount of stress is applied to the lasers to generate failures in relatively short test durations. A drawback of this approach is the lack of mean-time-to-failure data under intermediate and low stress conditions, leading to uncertainty in model parameters (especially optical power and current exponent) and potential overestimation of lifetimes at usage conditions. This approach is a concern especially for satellite communication systems where high reliability is required of lasers for long-term duration in the space environment. A number of groups have studied reliability and degradation processes in GaAs-based lasers, but none of these studies have yielded a reliability model based on the physics of failure. The lack of such a model is also a concern for space applications where complete understanding of degradation mechanisms is necessary. Our present study addresses the aforementioned issues by performing long-term lifetests under low stress conditions followed by failure mode analysis (FMA) and physics of failure investigation. We performed low-stress lifetests on both MBE- and MOCVD-grown broad-area InGaAs- AlGaAs strained QW lasers under ACC (automatic current control) mode to study low-stress degradation mechanisms. Our lifetests have accumulated over 36,000 test hours and FMA is performed on failures using our angle polishing technique followed by EL. This technique allows us to identify failure types by observing dark line defects through a window introduced in backside metal contacts. We also investigated degradation mechanisms in MOCVD-grown broad-area InGaAs-AlGaAs strained QW lasers using various FMA techniques. Since it is a challenge to control defect densities during the growth of laser structures, we chose to

  14. Contrasting regional and national mechanisms for predicting elevated arsenic in private wells across the United States using classification and regression trees.

    Science.gov (United States)

    Frederick, Logan; VanDerslice, James; Taddie, Marissa; Malecki, Kristen; Gregg, Josh; Faust, Nicholas; Johnson, William P

    2016-03-15

    Arsenic contamination in groundwater is a public health and environmental concern in the United States (U.S.) particularly where monitoring is not required under the Safe Water Drinking Act. Previous studies suggest the influence of regional mechanisms for arsenic mobilization into groundwater; however, no study has examined how influencing parameters change at a continental scale spanning multiple regions. We herein examine covariates for groundwater in the western, central and eastern U.S. regions representing mechanisms associated with arsenic concentrations exceeding the U.S. Environmental Protection Agency maximum contamination level (MCL) of 10 parts per billion (ppb). Statistically significant covariates were identified via classification and regression tree (CART) analysis, and included hydrometeorological and groundwater chemical parameters. The CART analyses were performed at two scales: national and regional; for which three physiographic regions located in the western (Payette Section and the Snake River Plain), central (Osage Plains of the Central Lowlands), and eastern (Embayed Section of the Coastal Plains) U.S. were examined. Validity of each of the three regional CART models was indicated by values >85% for the area under the receiver-operating characteristic curve. Aridity (precipitation minus potential evapotranspiration) was identified as the primary covariate associated with elevated arsenic at the national scale. At the regional scale, aridity and pH were the major covariates in the arid to semi-arid (western) region; whereas dissolved iron (taken to represent chemically reducing conditions) and pH were major covariates in the temperate (eastern) region, although additional important covariates emerged, including elevated phosphate. Analysis in the central U.S. region indicated that elevated arsenic concentrations were driven by a mixture of those observed in the western and eastern regions.

  15. `DSF' theory on mechanism of gushing anomaly in oil and water wells before an earthquake. I. Observation of gushing and causative hypothesis

    Science.gov (United States)

    Liu-qiao, Wang; Shan-yin, Li

    1989-04-01

    The gushing anomaly that occurs prior to an earthquake, a short-term abnormal phenomenon of common occurrence, is simply described here. It has been observed by an automatic recording float gauge that has continually operated for nine years at Wei-jiaquan No. 5 well in Miquan County of Xinjiang Province (XMW-5 well). During this period, four abnormal events have been recorded which show that the water level curve of the anomaly has a characteristic shape. By analysing the characteristic shape of the water level curve, we believed that an unknown rapidly varying stress field operated prior to an earthquake, thereby compressing the aquifer bed to cause an elastic deformation seepage-flow effect. Thus, a two-dimensional model of a radially unsteady seepage flow within a single aquifer bed, under variable tectonic stress, and with a rectangular pulse, was proposed. The abnormal water-level curve was then quantitatively synthesized on the basis of the above theory. The causative hypothesis (DSF) is based on the elastic deformation seepage-flow (DSF) theory.

  16. Tectonic uplift mechanism of the Goodenough and Fergusson Island gneiss domes, eastern Papua New Guinea: Constraints from seismic reflection and well data

    Science.gov (United States)

    Fitz, Guy; Mann, Paul

    2013-10-01

    The D'Entrecasteaux Island (DEI) gneiss domes are fault-bounded domes with ˜2.5 km of relief exposing ultrahigh-pressure (UHP) and high-pressure (HP) metamorphic gneisses and migmatites exhumed in an Oligocene-Miocene arc-continent collision and subduction zone subject to Late Miocene to Recent continental extension. To study the style of continental extension accompanying exhumation of the DEI gneiss domes, a grid of 1518 km of 2-D multichannel seismic (MCS) reflection data and well data is interpreted from the offshore areas surrounding the DEI, including the Trobriand basin and the Goodenough basin. The offshore study is combined with onshore geologic information to constrain the Oligocene to Recent tectonic evolution of the basins. MCS and well data are consistent with the Trobriand basin forming as a forearc basin caused by southward Miocene subduction at the Trobriand trench. At ˜8 Ma, the margin transitioned to an extensional tectonic environment. Since then, the Trobriand basin has subsided 1-2.5 km with few normal faults deforming the basin fill. South of the DEI, the Goodenough rift basin developed after extension began (˜8 Ma) with the hanging wall of the north-dipping Owen-Stanley normal fault bounding the southern margin of the basin. The lack of evidence of upper crustal extension accompanying subsidence in the Trobriand and Goodenough basins suggests depth-dependent lithospheric extension from 8 to 0 Ma has accompanied uplift of the DEI gneiss domes and supports schematic model of uplift of the DEI domes involving vertical exhumation of buoyant, postorogenic lower crust, far-field extension from slab rollback, and an inverted two-layer crustal density structure.

  17. 'New to me': changing patient understanding of psoriasis and identifying mechanisms of change. The Pso Well(®) patient materials mixed-methods feasibility study.

    Science.gov (United States)

    Nelson, P A; Kane, K; Pearce, C J; Bundy, C; Chisholm, A; Hilton, R; Thorneloe, R; Young, H; Griffiths, C E M; Cordingley, L

    2017-09-01

    Psoriasis is an inflammatory long-term condition involving comorbidities, unhealthy lifestyle and significant life impact. Patients' understanding of psoriasis is limited and support lacking. The Common-Sense Model of Self-Regulation of Health and Illness emphasizes the role of illness and treatment beliefs on coping and self-management. New 'Pso Well(®) ' patient materials informed by the model, addressed psoriasis as a long-term condition, medication management and lifestyle behaviours. To investigate whether Pso Well(®) materials (i) broaden understanding of psoriasis without increasing anxiety; (ii) are acceptable; and (iii) comprise features that appear to effect change. The Revised Illness Perceptions Questionnaire (IPQ-R modified) and the Hospital Anxiety and Depression Scale (HADS) were administered in patients before and after intervention. Numerical rating scales assessed perceptions of change in understanding and anxiety resulting from engagement with the materials. Qualitative interviews explored acceptability and perceived 'active ingredients'. Fifty-five patients completed pre- and postintervention questionnaires (56% female; median age 59 years). Postintervention, a large effect size was indicated in two IPQ-R domains - illness coherence [t(55) = -3·48, P = 0·001 (two-tailed), η(2)  = 0·19] and personal control [t(55) = -2·98, P = 0·004 (two-tailed), η(2)  = 0·14] - and a medium effect in one, treatment control [t(55) = -2·08, P = 0·042 (two-tailed), η(2)  = 0·08]. HADS scores did not change. For numerical rating scales, 80% of participants reported increased understanding of psoriasis and none reported increased anxiety. Interviews with 19 patients indicated the materials were acceptable and usable. Factors reported to broaden understanding and promote engagement with self-management included linking of related disease aspects, personally relevant content and high-quality design. High-quality, theory-based psoriasis

  18. Evaluation of chemical and mechanical resistance of virgin and recycled poly (ethylene terephthalate and poly(methylene oxide when applied as gravel pack in petroleum wells

    Directory of Open Access Journals (Sweden)

    Alexandre Zacarias Ignácio Pereira

    2015-08-01

    Full Text Available AbstractNowadays more and more unexpected uses for common materials have been observed, especially when recycled polymers are concerned. In this work, the viability for application of virgin and recycled poly(ethylene terephthalate (PETvir and PETrec, respectively and also poly(methylene oxide (PMO as granular materials (gravel for gravel packing in sand control systems for unconsolidated sandstone reservoirs was studied. Polymer samples were tested in conditions similar to those observed in Campos Basin sandstone formations, in Brazilian Southwest (70 °C and 24.1 MPa. Samples were individually confined in roller cells with chemicals used in formation treatment: hydrochloric acid, pentapotassic DTPA salt (chelant Trilon CK and in a mixture of diesel, xylene and butyl glycol. Mass loss was measured and the changes in molecular mass verified by size exclusion chromatography (SEC. Physical shape and grain size distribution were verified by scanning electron microscopy (SEM and sieving tests. The effects over the polymeric gravel pack confinement resistance and permeability were evaluated using an API permeability cell. PMO proved to have a limited use, whereas PETrec and PETvir samples were not significantly affected, suggesting the viability of applying that recycled polymer in gravel packing for sand control in petroleum wells.

  19. Regional tectonic context, timing, and intrusion mechanism of gneiss domes, eastern Papua New Guinea, from offshore seismic reflection and well data

    Science.gov (United States)

    Fitz, G. G.; Mann, P.; Lavier, L. L.

    2011-12-01

    The D'Entrecasteaux Island (DEI) gneiss domes are fault-bounded topographic domes with ~2.5 km of relief exposing ultrahigh-pressure (UHP) and high-pressure (HP) metamorphic gneisses and migmatites that began to exhume ~8 Ma in a zone of continental extension 120 km west of the tip of the westward propagating Woodlark seafloor spreading. Two previous models for the origin and emplacement of the gneiss domes include: 1) the domes are metamorphic core complexes formed as footwall blocks on north-dipping, low-angle (Trobriand basin and the Goodenough basin. MCS and well data show the Trobriand basin initially formed as an asymmetrical Miocene forearc basin overlying the south-dipping Trobriand subduction zone that underwent a late Miocene (~11-9 Ma) inversion event that deformed and uplifted the basin's southern and northern margins. Since extension began 8 Ma, the Trobriand basin has evolved as a symmetrical sag basin with 1-3 km of subsidence and few normal faults deforming the upper crust. The Goodenough basin to the south of the Trobriand basin formed as an asymmetrical and southward-tilted half-graben whose master normal fault is the Owen-Stanley fault zone (OSFZ) along the southern edge of the basin. Reconstruction on this structure based on the geometry of faults in the hanging wall indicates a minimum slip on the order of 10 km along a listric fault plane shallowly dipping to the north. The western extension of the OSFZ dips 18 deg. to 24 deg. north along the northern edge of the Dayman dome; the eastern extension of the fault along the northern edge of the Moresby seamount dips 30 deg. north. We have also identified the Trobriand fault, a 60-km-long subaerial and submarine transfer fault connecting the OSFZ and the active Woodlark spreading center in the offshore seismic data. To understand continental extension at depth surrounding the DEI, upper crust extension determined through structural reconstructions is compared to lower crust extension predicted from

  20. Wellness as fairness.

    Science.gov (United States)

    Prilleltensky, Isaac

    2012-03-01

    I argue that distinct conditions of justice lead to diverse wellness outcomes through a series of psychosocial processes. Optimal conditions of justice, suboptimal conditions of justice, vulnerable conditions of injustice, and persisting conditions of injustice lead to thriving, coping, confronting, and suffering, respectively. The processes that mediate between optimal conditions of justice and thriving include the promotion of responsive conditions, the prevention of threats, individual pursuit, and avoidance of comparisons. The mechanisms that mediate between suboptimal conditions of justice and coping include resilience, adaptation, compensation, and downward comparisons. Critical experiences, critical consciousness, critical action, and righteous comparisons mediate between vulnerable conditions of injustice and confrontation with the system. Oppression, internalization, helplessness, and upward comparisons mediate between persisting conditions of injustice and suffering. These psychosocial processes operate within and across personal, interpersonal, organizational and community contexts. Different types of justice are hypothesized to influence well-being within each context. Intrapersonal injustice operates at the personal level, whereas distributive, procedural, relational, and developmental justice impact interpersonal well-being. At the organizational level, distributive, procedural, relational and informational justice influence well-being. Finally, at the community level, distributive, procedural, retributive, and cultural justice support community wellness. Data from a variety of sources support the suggested connections between justice and well-being.

  1. On the Innovation Mechanism of College Party Construction on the College Students'Subjective Well-being%基于大学生主观幸福感的党建创新机制研究

    Institute of Scientific and Technical Information of China (English)

    秦朗

    2015-01-01

    大学生主观幸福感的获得日渐成为高校党建工作关注的重点之一,高校从事党务和思想政治工作的人员应结合当代大学生的成长环境和信息获取方式,梳理大学生主观幸福感的形成机理,把组织的层级建设、党建工作的思想性和现实性及新媒体工具的有效运用结合起来,构建提升大学生主观幸福感的党建创新机制。%College students'subjective well -being is becoming one of the focal points of the Party building work in Colleges and universities ,Personnel engaged in the party and the ideological and political work in colleges and universities should building the innovation mechanism which can improve the college students'subjective well-being .In order to do it ,it should be necessary to know the contemporary college students'grow th environment and information acquisition , the formation mechanism of the college students'subjective well-being ,and to combine hierarchical organization construction with the new media tools .

  2. Well production decline

    Energy Technology Data Exchange (ETDEWEB)

    Cvetkovic, Branimir

    2008-12-15

    complementary to the reservoir simulation. More geology features should be considered to fully take advantage of the modelling findings. The starting point of the second modelling step concerns late time vertical-well responses or decline curves involving empirical solution of Arps type. This includes an investigation of well pressure responses for a rate decline of an Arps-type variable-rate of a wellbore for selected exponents, b. The modelling explores pressure wellbore responses during a variable-rate production, and the approach introduces a no-flow specified boundary that moves outwards from a wellbore axis with a predefined speed. For the specific speed of a no-flow moving boundary, the model generates pressure profiles causing the decline exponents, b. Known b values were selected and each of them was empirically derived through the inflow performance relationships to a drive mechanism. This modelling approach with analytically derived pressure solutions can be extended to a horizontal well. Furthermore, the continuously measured well rates and pressure models can be calibrated and verified. (Author)

  3. Quantum well lasers

    CERN Document Server

    Zory, Jr, Peter S; Kelley, Paul

    1993-01-01

    This book provides the information necessary for the reader to achieve a thorough understanding of all aspects of QW lasers - from the basic mechanism of optical gain, through the current technolgoical state of the art, to the future technologies of quantum wires and quantum dots. In view of the growing importance of QW lasers, this book should be read by all those with an active interest in laser science and technology, from the advanced student to the experienced laser scientist.* The first comprehensive book-length treatment of quantum well lasers* Provides a detailed treatment

  4. Well-defined crystallites autoclaved from the nitrate/NH{sub 4}OH reaction system as the precursor for (Y,Eu){sub 2}O{sub 3} red phosphor: Crystallization mechanism, phase and morphology control, and luminescent property

    Energy Technology Data Exchange (ETDEWEB)

    Zhu Qi [Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), School of Materials and Metallurgy, Northeastern University, Shenyang, Liaoning 110004 (China); Advanced Materials Processing Unit, National Institute for Materials Science, Sengen 1-2-1, Tsukuba, Ibaraki 305-0047 (Japan); Li Jiguang, E-mail: LI.Jiguang@nims.go.jp [Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), School of Materials and Metallurgy, Northeastern University, Shenyang, Liaoning 110004 (China); Advanced Materials Processing Unit, National Institute for Materials Science, Sengen 1-2-1, Tsukuba, Ibaraki 305-0047 (Japan); Ma, Renzhi; Sasaki, Takayoshi [World Premier International Center for Materials Nanoarchitectonics (MANA), National Institute for Materials Science, Namiki 1-1, Tsukuba, Ibaraki 305-0044 (Japan); Yang, Xiaojing [College of Chemistry, Beijing Normal University, Beijing 100875 (China); Li Xiaodong; Sun Xudong [Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), School of Materials and Metallurgy, Northeastern University, Shenyang, Liaoning 110004 (China); Sakka, Yoshio [Advanced Materials Processing Unit, National Institute for Materials Science, Sengen 1-2-1, Tsukuba, Ibaraki 305-0047 (Japan)

    2012-08-15

    Autoclaving the rare-earth nitrate/NH{sub 4}OH reaction system under the mild conditions of 120-200 Degree-Sign C and pH 6-13 have yielded four types of well-crystallized compounds with their distinctive crystal shapes, including Ln{sub 2}(OH){sub 5}NO{sub 3}{center_dot}nH{sub 2}O (Ln=Y and Eu) layered rare-earth hydroxide (hexagonal platelets), Ln{sub 4}O(OH){sub 9}NO{sub 3} oxy-hydroxyl nitrate (hexagonal prisms and microwires), Ln(OH){sub 2.94}(NO{sub 3}){sub 0.06}{center_dot}nH{sub 2}O hydroxyl nitrate (square nanoplates), and Ln(OH){sub 3} hydroxide (spindle-shaped microrods). The occurrence domains of the compounds are defined. Ammonium nitrate (NH{sub 4}NO{sub 3}) as a mineralizer effectively widens the formation domains of the NO{sub 3}{sup -} containing compounds while leads to larger crystals at the same time (up to 0.3 mm). Crystallization mechanisms of the compounds and the effects of NH{sub 4}NO{sub 3} were discussed. Optical properties (PLE/PL) of the four phases were characterized in detail and were interpreted from the different site symmetries of Eu{sup 3+}. The compounds convert to cubic-structured (Y{sub 0.95}Eu{sub 0.05}){sub 2}O{sub 3} by annealing at 600 Degree-Sign C while retaining their original crystal morphologies. The resultant phosphor oxides of diverse particle shapes exhibit differing optical properties, in terms of luminescent intensity, asymmetry factor of luminescence and fluorescence lifetime, and the underlying mechanism was discussed. - Graphical abstract: Well-defined crystallites of the various phases have been autoclaved from the nitrate/NH{sub 4}OH reaction system. Crystallization mechanisms of the compounds and the effects of NH{sub 4}NO{sub 3} were discussed. Highlights: Black-Right-Pointing-Pointer Well-defined crystallites of four phases have been hydrothermally synthesized. Black-Right-Pointing-Pointer The occurrence domains of the compounds are defined. Black-Right-Pointing-Pointer Crystallization mechanisms and the

  5. 地质构造对煤层气井产能的控制机理与规律%Control Mechanism and Law of Geological Structure Affected to Production Capacity of Coal Bed Methane Well

    Institute of Scientific and Technical Information of China (English)

    赵少磊; 朱炎铭; 曹新款; 王怀勐; 周友

    2012-01-01

    The paper discussed the control mechanism of the structure evolution and structural shape affected to the production capacity of the coal bed methane well. In combination with the practices in Fenzhuang Mining Area of Qinnan Area, the paper analyzed the control law of the geological structure to the distribution of the coal bed methane wells with different production capacity. The study showed that the structure evolution would control the full accumulation process of coal bed methane. The later structure shape would be critical impor- tant to the migration and storage of the coal bed methane. The two wings of the fold and the syncline core would have high methane content and the anticline core and the open fault nearby would have low methane content. The study on the Fanzhuang Mining Area showed that the production capacity of coal bed methane well would have a close relationship to the structure location. The high production wells main- ly distributed at the wings of the fold structure, the subordinate anticline core of synclinorium and the subordinate syncline core of anticli-norium and the average daily gas production could reach to 1 000-5 000 m^3. The low production coal bed methane well and the water production well mainly distributed at the subordinate anticline core of anticlinorium and around the normal faults and the average daily gas production would reach to less than 500 m^3.%探讨了构造演化与构造形态对煤层气井产能的控制机理,并结合沁南地区樊庄矿区实践,分析了构造对不同产能煤层气井分布的控制规律。研究表明:构造演化控制煤层气的整个成藏过程;后期构造形态对煤层气的运移和保存至关重要,褶曲两翼及向斜核部含气量高,背斜核部及开放性断层附近含气量低。同时对樊庄矿区研究表明:煤层气井产能与所处构造部位密切相关,高产井主要分布于褶曲构造翼部、复向斜的次级背斜核部及复背斜的次级向

  6. Mechanisms of free-surface breakup in vibration-induced liquid atomization

    Science.gov (United States)

    Vukasinovic, Bojan; Smith, Marc K.; Glezer, Ari

    2007-01-01

    The mechanisms of droplet formation that take place during vibration-induced drop atomization are investigated experimentally. Droplet ejection results from the breakup of transient liquid spikes that form following the localized collapse of free-surface waves. Breakup typically begins with capillary pinch-off of a droplet from the tip of the spike and can be followed by additional pinch-offs of satellite droplets if the corresponding capillary number is sufficiently small (e.g., in low-viscosity liquids). If the capillary number is increased (e.g., in viscous liquids), breakup first occurs near the base of the spike, with or without subsequent breakup of the detached, thread-like spike. The formation of these detached threads is governed by a breakup mechanism that is separated from the tip-dominated capillary pinch-off mechanism by an order of magnitude in terms of dimensionless driving frequency f*. The dependence of breakup time and unbroken spike length on fluid and driving parameters is established over a broad range of dimensionless driving frequencies (10-3Lathrop [Phys. Rev. Lett. 76, 1824 (1996)] derived for the onset of droplet ejection from Faraday waves. It is shown in the present study that the acceleration threshold in this limit scales like ac˜f4/3(σ/ρ)1/3.

  7. Well-being

    OpenAIRE

    Blatný, M. (Marek); Šolcová, I. (Iva)

    2015-01-01

    The chapter first discusses two essential theoretical concepts of well-being: subjective well-being and psychological well-being. Then the main findings on the links between well-being and socio-demographic variables are summarized. The main focus of the chapter is on the analysis of the links between personality and well-being. In agreement with the present views on personality domains, the relationships between well-being and personality traits, characteristic adaptations and personal narra...

  8. Dynamic reservoir well interaction

    NARCIS (Netherlands)

    Sturm, W.L.; Belfroid, S.P.C.; Wolfswinkel, O. van; Peters, M.C.A.M.; Verhelst, F.J.P.C.M.

    2004-01-01

    In order to develop smart well control systems for unstable oil wells, realistic modeling of the dynamics of the well is essential. Most dynamic well models use a semi-steady state inflow model to describe the inflow of oil and gas from the reservoir. On the other hand, reservoir models use steady s

  9. Application of the mechanical cutting technology for coiled tubing in Yong 25-11 well%连续油管机械切割技术在永25-11井的应用

    Institute of Scientific and Technical Information of China (English)

    刘海明; 叶红; 田明; 吴国洲; 肖宝军

    2014-01-01

    The methods,such as back-off on neutral point and explosive cutting,are commonly used to deal withФ73 mm stuck tubing inФ139.7 mm casing.The back-off technique has disadvantages of low efficiency,high labor intensity, and high workover cost.The explosive cutting,being easily affected by downhole deviation,and the dirt and scale adhere to tubing inwall,and the cutter tool can not run into the predetermined position,the effective cutting can not be implemented. To solve the problems,it was carried out the improvement of cutting technology of general mechanical internal cutter.By applying coiled tubing to transmit general machinery cutter tools,using hydraulic motor as power tools,the stuck tubing was successfully cut in Yong25-11 well,which can provide a new way for processing the stuck tubing.%处理139.7 mm套管内遇卡Ф73 mm油管的常用方法有中和点倒扣法和爆炸切割法,倒扣解卡方式效率低、劳动强度大、修井费用高;而爆炸切割法易受到井斜及油管内壁脏物、油污影响,切割弹往往下不到预定位置,无法实现有效切割。为解决现有工艺问题,对普通机械内割刀切割技术进行研究,改进传统机械内割刀切割技术,应用连续油管传输普通机械内割刀工具,采用液压马达作为动力工具,现场应用,成功切割永25-11井遇卡油管,为处理遇卡油管积累经验,提供新思路。

  10. Pulmonary mechanics during mechanical ventilation.

    Science.gov (United States)

    Henderson, William R; Sheel, A William

    2012-03-15

    The use of mechanical ventilation has become widespread in the management of hypoxic respiratory failure. Investigations of pulmonary mechanics in this clinical scenario have demonstrated that there are significant differences in compliance, resistance and gas flow when compared with normal subjects. This paper will review the mechanisms by which pulmonary mechanics are assessed in mechanically ventilated patients and will review how the data can be used for investigative research purposes as well as to inform rational ventilator management.

  11. well-being perspective

    African Journals Online (AJOL)

    well-being, namely: self-acceptance, personal growth, purpose in life, positive relations with others .... Sternberg, 2004] identifies the concepts of exploration and commitment from the work of ..... Clinical applications of well-being therapy.

  12. Total well dominated trees

    DEFF Research Database (Denmark)

    Finbow, Arthur; Frendrup, Allan; Vestergaard, Preben D.

    cardinality then G is a total well dominated graph. In this paper we study composition and decomposition of total well dominated trees. By a reversible process we prove that any total well dominated tree can both be reduced to and constructed from a family of three small trees....

  13. Well Integrity and Sealing in CO2 Sequestration Wells

    Science.gov (United States)

    Sweatman, R.; Santra, A.; Kulakofsky, D.

    2009-12-01

    CO2 sequestration is a cost-effective and safe way to help mitigate climate change. Sustained well integrity and zonal isolation of CO2 by cement for the required 1000 year trapping period may be challenging. Some researchers report that cement fails when exposed to CO2 leading to potential leakage into the atmosphere or other underground zones. Others show cement samples from 30-50 year old CO2 wells that maintain the well’s sealing integrity, even though carbonization was found. This presentation provides reasons likely for this disparity between research lab test results and actual well performance data along with best practices to provide efficient cement-based systems for maintaining CO2 containment in storage and EOR (enhanced oil recovery) reservoirs. This discussion includes the geochemical conditions surrounding wells and the positive, long-term effects on cement durability, sealing integrity, and the protection of well casing from CO2 induced corrosion. Also discussed are recent laboratory results testing cement samples surrounded by formation material treated at two different downhole conditions. In one case the cement specimens were treated with a 40% humid CO2 at 140°F and 2000 psi whereas in the second case they were treated with saturated CO2 in water at 200°F and 2000 psi for various time intervals. Results show that samples of carefully designed cement systems had carbonization without any sign of loss of mechanical or sealing integrity which could lead to zonal isolation and well integrity failures. We also will report on a new lab method proposed to determine CO2 sealing performance by cement in a relatively short time period compared to previous methods. In summary, we will discuss a comprehensive approach that may be taken to help ensure longer term effective well integrity and CO2 containment in new CO2 wells and remedial solutions for old wells and for plugging and abandoning wells.

  14. Well testing: interpretation methods

    Energy Technology Data Exchange (ETDEWEB)

    Bourdarot, G. [Elf Aquitaine, 92 - Courbevoie (France)

    1998-12-31

    This book presents the different methods to use for interpreting well tests: conventional methods, type curves, derivative, according to the type of reservoir limits (faults, channels, secant faults, constant pressure limits, closed reservoir) and the well configuration (partial penetration, inclined, fractured, horizontal or injection well). It indicates the method to be used in the case of more complex reservoirs (fissured reservoirs, two-layered reservoirs), interference tests or pulse tests and when fluid produced is gas or polyphasic. (authors) 60 refs.

  15. Well testing: interpretation methods

    Energy Technology Data Exchange (ETDEWEB)

    Bourdarot, G. (Elf Aquitaine, 92 - Courbevoie (France))

    1998-01-01

    This book presents the different methods to use for interpreting well tests: conventional methods, type curves, derivative, according to the type of reservoir limits (faults, channels, secant faults, constant pressure limits, closed reservoir) and the well configuration (partial penetration, inclined, fractured, horizontal or injection well). It indicates the method to be used in the case of more complex reservoirs (fissured reservoirs, two-layered reservoirs), interference tests or pulse tests and when fluid produced is gas or polyphasic. (authors) 60 refs.

  16. Wellness in Industry.

    Science.gov (United States)

    Hackleman, Karen T.; And Others

    1985-01-01

    Reports on efforts of three institutions in response to need for consumer health information: Health Education Center (promotes health in southwestern Pennsylvania), Tulsa City-County Library (Oklahoma), and Wellness Council of the Midlands (WELCOM) (promotes wellness at work site in Omaha, Nebraska, area). WELCOM's 62-item reference list is…

  17. Staying Well at Work.

    Science.gov (United States)

    Blai, Boris, Jr.

    Employee wellness directly affects business/industry operations and costs. When employees are helped and encouraged to stay well, this people-positive policy results in triple benefits: reduced worker absenteeism, increased employee productivity, and lower company expenditures for health costs. Health care programs at the worksite offer these…

  18. New challenges? Well, certainly!

    DEFF Research Database (Denmark)

    Lauridsen, Karen M.

    proficiency, but research as well as experience on the ground tells us that this is not enough. Everyone must learn to navigate in the multilingual and multicultural learning space because lecturers as well as students may come from different countries and cultures and therefore have different first languages...

  19. Water Treatment Technology - Wells.

    Science.gov (United States)

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on wells provides instructional materials for five competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on the following areas: dug, driven, and chilled wells, aquifer types, deep well…

  20. Provider Health and Wellness.

    Science.gov (United States)

    Nanda, Anil; Wasan, Anita; Sussman, James

    2017-07-19

    Provider health and wellness is a significant issue and can impact patient care, including patient satisfaction, quality of care, medical errors, malpractice risk, as well as provider and office staff turnover and early retirement. Health and wellness encompasses various areas including burnout, depression, divorce, and suicide and affects providers of all specialties and at all levels of training. Providers deal with many everyday stresses, including electronic health records, office politics, insurance and billing issues, dissatisfied patients, and their own personal and family issues. Approximately half of all physicians suffer from burnout, and the rate of burnout among physicians of all specialties is increasing. An important first step in dealing with burnout is recognition and then seeking assistance. Strategies to prevent and treat burnout include increasing provider resiliency as well as implementing practical changes in the everyday practice of medicine. There is currently very little data regarding health and wellness specifically in the field of allergy and immunology, and studies are necessary to determine the prevalence of burnout and related issues in this field. Many medical specialties as well as state and national medical associations have health and wellness committees and other resources, which are essential for providers. Health and wellness programs should be introduced early in a provider's training and continued throughout a provider's career. Copyright © 2017 American Academy of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

  1. The WELL Detector

    CERN Document Server

    Bellazzini, R; Brez, A; Gariano, G; Latronico, L; Lumb, N; Papanestis, A; Spandre, G; Massai, M M; Raffo, R; Spezziga, M A

    1999-01-01

    We introduce the WELL detector, a new type of position-sensitive gas proportional counter produced using advanced printed circuit board (PCB) technology. The WELL is based on a thin kapton foil, copp erclad on both sides. Charge amplifying micro-wells are etched into the first metal and kapton layers. These end on a micro-strip pattern which is defined on the second metal plane. The array of micr o-strips is used for read-out to obtain 1-D positional information. First results from our systematic assessment of this device are reported.

  2. Agricultural Drainage Well Intakes

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — Locations of surface intakes for registered agriculture drainage wells according to the database maintained by IDALS. Surface intakes were located from their...

  3. Optimizing well intervention routes

    Energy Technology Data Exchange (ETDEWEB)

    Paiva, Ronaldo O. [PETROBRAS S.A., Vitoria, ES (Brazil); Schiozer, Denis J.; Bordalo, Sergio N. [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica. Centro de Estudo do Petroleo (CEPETRO)]. E-mail: denis@dep.fem.unicamp.br; bordalo@dep.fem.unicamp.br

    2000-07-01

    This work presents a method for optimizing the itinerary of work over rigs, i.e., the search for the route of minimum total cost, and demonstrates the importance of the dynamics of reservoir behaviour. The total cost of a route includes the rig expenses (transport, assembly and operation), which are functions of time and distances, plus the losses of revenue in wells waiting for the rig, which are also dependent of time. A reservoir simulator is used to evaluate the monetary influence of the well shutdown on the present value of the production curve. Finally, search algorithms are employed to determine the route of minimal cost. The Simulated Annealing algorithm was also successful in optimizing the distribution of a list of wells among different work over rigs. The rational approach presented here is recommended for management teams as a standard procedure to define the priority of wells scheduled for work over. (author)

  4. Emotional Well-Being

    Science.gov (United States)

    ... Cancer Nutrition Information (AICR) Emotional Well-Being Patient Empowerment Support Get Answers To Your Questions Meet Patients ... with kidney cancer, you may wish to seek professional assistance. These services may be covered by your ...

  5. Well Logging Symposium News

    Institute of Scientific and Technical Information of China (English)

    Yang Chunsheng

    1996-01-01

    @@ ‘96 International Symposium on Well Logging Techniques for Oilfield Development under Waterflood was held on 17-21 September, 1996 in Beijing. The symdrew than 160 experts and scholars in the well logging circle from Russia,The United States, France, Britain, Indonesia and China. About 80 papers were presented duringthe symposium. Mr. Zhang Yongyi,Vice President of CNPC delivered the opening remarks.

  6. Method for the conversion of thermal energy into a mechanical rotation as well as a facility for carrying out the method. Verfahren zum Umwandeln von Waermeenergie in eine mechanische Drehbewegung sowie Vorrichtung zum Durchfuehren des Verfahrens

    Energy Technology Data Exchange (ETDEWEB)

    Adam, W.

    1991-01-31

    The invention is a newly developed method for concerting thermal energy into mechanical energy in form of a rotation. With this mehtod, a working fluid is heated to a first temperature in a chamber of a heater and driven with the pressurized working fluid of an internal combustion engine. With this method, the working fluid of the internal combustion engine is supplied to a cooling system in which the working fluid cooled to a second temperature smaller than the first temperature and from which the working fluid is supplied in a liquied form to the chamber of the heater.

  7. Geothermal Well Stimulation

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, D. A.; Morris, C. W.; Sinclair, A. R.; Hanold, R. J.; Vetter, O. J.

    1981-03-01

    The stimulation of geothermal wells presents some new and challenging problems. Formation temperatures in the 300-600 F range can be expected. The behavior of stimulation fluids, frac proppants, and equipment at these temperatures in a hostile brine environment must be carefully evaluated before performance expectations can be determined. In order to avoid possible damage to the producing horizon of the formation, high temperature chemical compatibility between the in situ materials and the stimulation materials must be verified. Perhaps most significant of all, in geothermal wells the required techniques must be capable of bringing about the production of very large amounts of fluid. This necessity for high flow rates represents a significant departure from conventional petroleum well stimulation and demands the creation of very high near-wellbore permeability and/or fractures with very high flow conductivity.

  8. Well Conductor Strain Monitoring

    Science.gov (United States)

    2014-05-06

    comply with a collection of information if it does not display a currently valid OMB control number. 1. REPORT DATE JUL 2014 2. REPORT TYPE 3. DATES...849,429; filed on June 26, 2013 by the inventor, Dr. Anthony Ruffa and entitled “ SUBSEA WELL CONDUCTOR STRAIN MONITORING”. STATEMENT OF

  9. Rural Wellness and Prevention

    Science.gov (United States)

    ... governors of U.S. states have implemented wellness and prevention programs in their states in the last few years. The programs generally promote healthy habits, understanding of risks associated with lifestyles, disease management practices, and regular physical activity. Worksites provide ...

  10. Live Your Life Well

    Science.gov (United States)

    ... Workplace Wellness Work-Life Balance Mental Illness and Work Support an Employee Workplace Bullying & Violence Signs of a Healthy Workplace ... you can thrive even in the face of stress. We want you to know that you can ... you focus at work, overcome obstacles, get along with the people around ...

  11. Hantush Well Function Revisited

    NARCIS (Netherlands)

    Veling, E.J.M.; Maas, C.

    2010-01-01

    In this paper we comment on some recent numerical and analytical work to evaluate the Hantush Well Function. We correct an expression found in a Comment by Nadarajah (J. of Hydrology, vol. 338, p. 152-153 (2007)) to a paper by Prodanoff et al. (J. of Hydrology, vol. 318, p. 173-183 (2006)). We subse

  12. Child Wellness and Happiness

    Science.gov (United States)

    Rettew, David C.

    2009-01-01

    Wellness and happiness should be considered in the clinical treatment of child and adolescent psychiatry, in addition with thinking about illness. Meanwhile, various studies on child and adolescent psychiatry,which includes an article from the "Journal of Happiness Studies," are discussed.

  13. The world's deepest well

    Science.gov (United States)

    Kozlovskii, E. A.

    1984-12-01

    A 12,000-meter-deep research well at Kola in the Soviet Arctic is discussed. A major objective of the well was to penetrate into the basement rock of basaltic composition, presumably marked by an abrupt increase in the velocity of the seismic waves. At Kola the shift occurs at 9000 meters. However, instead of the basalt expected below that depth, an anomalous zone of disaggregated metamorphic rock was found. Further in that zone abundant flows of hot, highly mineralized 'water of crystallization' were found. Flows of gas, including helium, hydrogen, nitrogen, methane, and other hydrocarbons, and carbon dioxide were observed at all levels, thus indicating the existence of active gas-water processes, which raises the prospect of new ore deposits. The well utilizes a 400- to 500-ton aluminum alloy drill string. Unlike conventional drilling, the bit is powered by a turbine driven by the high-pressure flow of the drilling mud at 250 atm, which eliminates the disabling stresses at the surface caused by the rotation of the entire string. This technology opens the possibility of drilling to the depths of 15 to 17 km. The well is expected to help improve the interpretation of the seismic data.

  14. Why Does Well

    Science.gov (United States)

    Sartorius, Tara Cady

    2010-01-01

    There is something disappointing about life. It is messy and out of control. It seems the more one tries to put life in order, the more ordering there is to do. The more one seeks explanations, the more confusing things become. Life's an impossible task. Maybe one should just give up. Or, then again, one might as well keep trying. It's this…

  15. Child Wellness and Happiness

    Science.gov (United States)

    Rettew, David C.

    2009-01-01

    Wellness and happiness should be considered in the clinical treatment of child and adolescent psychiatry, in addition with thinking about illness. Meanwhile, various studies on child and adolescent psychiatry,which includes an article from the "Journal of Happiness Studies," are discussed.

  16. ADVANCED CEMENTS FOR GEOTHERMAL WELLS

    Energy Technology Data Exchange (ETDEWEB)

    SUGAMA,T.

    2007-01-01

    Using the conventional well cements consisting of the calcium silicate hydrates (CaO-SiO{sub 2}-H{sub 2}O system) and calcium aluminum silicate hydrates (CaO-Al{sub 2}O{sub 3}-SiO{sub 2}-H{sub 2}O system) for the integrity of geothermal wells, the serious concern confronting the cementing industries was their poor performance in mechanically supporting the metallic well casing pipes and in mitigating the pipe's corrosion in very harsh geothermal reservoirs. These difficulties are particularly acute in two geological regions: One is the deep hot downhole area ({approx} 1700 m depth at temperatures of {approx} 320 C) that contains hyper saline water with high concentrations of CO{sub 2} (> 40,000 ppm) in conjunction with {approx} 100 ppm H{sub 2}S at a mild acid of pH {approx} 5.0; the other is the upper well region between the well's surface and {approx} 1000 m depth at temperatures up to 200 C. The specific environment of the latter region is characterized by highly concentrated H{sub 2}SO{sub 4} (pH < 1.5) brine containing at least 5000 ppm CO{sub 2}. When these conventional cements are emplaced in these harsh environments, their major shortcoming is their susceptibility to reactions with hot CO{sub 2} and H{sub 2}SO4, thereby causing their deterioration brought about by CO{sub 2}-catalyzed carbonation and acid-initiated erosion. Such degradation not only reduced rapidly the strength of cements, lowering the mechanical support of casing pipes, but also increased the extent of permeability of the brine through the cement layer, promoting the rate of the pipe's corrosion. Severely carbonated and acid eroded cements often impaired the integrity of a well in less than one year; in the worst cases, casings have collapsed within three months, leading to the need for costly and time-consuming repairs or redrilling operations. These were the reasons why the geothermal well drilling and cementing industries were concerned about using conventional well

  17. Method of treating wells

    Energy Technology Data Exchange (ETDEWEB)

    Knox, J.A.; Lasater, R.M.

    1966-11-22

    Chemical compositions and methods are provided for treating underground formations to render their surfaces water-repellent or preferentially oil-wettable. Previous methods have provided only temporary water-repellency because they do not actually act chemically with the reservoir rock. This improvement is obtained by using a treating agent which does not form a precipitate upon hydrolysis with water, such as a liquid organo-halogen- silane or its ester. A water-soluble anhydrous solvent which is nonreactive with the silane is used as a carrier. This method may be used for treating non-oil-bearing aquifers for increasing the flow rate of water, such as in water supply wells, or in water input rate, such as in water disposal wells. (10 claims)

  18. Quantum Wells in Photovoltaic Cells

    CERN Document Server

    Rohr, C; Ballard, I M; Bushnell, D B; Connolly, J P; Daukes, N J Ekins-; Barnham, K W J

    2016-01-01

    The fundamental efficiency limit of a single bandgap solar cell is about 31% at one sun with a bandgap of about Eg = 1.35 eV (1), determined by the trade-off of maximising current with a smaller bandgap and voltage with a larger bandgap. Multiple bandgaps can be introduced to absorb the broad solar spectrum more efficiently. This can be realised in multi- junction cells, for example, where two or more cells are stacked on top of each other either mechanically or monolithically connected by a tunnel junction. An alternative or complementary (see section 1.4) approach is the quantum well cell (QWC).

  19. Mechanical science

    CERN Document Server

    Bolton, W C

    2013-01-01

    This book gives comprehensive coverage of mechanical science for HNC/HND students taking mechanical engineering courses, including all topics likely to be covered in both years of such courses, as well as for first year undergraduate courses in mechanical engineering. It features 500 problems with answers and 200 worked examples. The third edition includes a new section on power transmission and an appendix on mathematics to help students with the basic notation of calculus and solution of differential equations.

  20. Drilling and well technology

    Energy Technology Data Exchange (ETDEWEB)

    Milheim, K. [Mining University Leoben Institute for Drilling Technology, (Austria)

    1996-12-31

    Over a billion dollars a year is lost by exploration and production companies drilling wells because of the lack of learn curve management (LMC) practices. This paper presents the importance of the LMC concept, what it is, why LMC has not yet been recognized as a major initiative for improving drilling cost performance. The paper discusses the different types of planning, problems with implementation of plans, the use and misuse of drilling results and data bases, and the lack of post analysis practices. The major point of the paper is to show the massive savings that can be achieved by valuing LMC, learning LMC and successfully implementing LMC. . 2 refs., 5 figs.

  1. WellBe手环

    Institute of Scientific and Technical Information of China (English)

    2016-01-01

    来认识一下WellBe,一只能随时探测你精神压力状态,并立即提供解决建议的手环。WellBe判断佩戴者心理压力的依据是内藏的光学心率计所提供的实时测量值,在统计过最容易使佩戴者产生心理压力的场合后,为其提供量身定制的压力释放方式——包括冥思、深呼吸、引导想象,或是个性化过的学习课程或音乐播放列表。而它采用的软木腕带材质也在作出拥抱大自然,告别紧张快节奏的日常生活的暗示。

  2. Modeling Quantum Well Lasers

    Directory of Open Access Journals (Sweden)

    Dan Alexandru Anghel

    2012-01-01

    Full Text Available In semiconductor laser modeling, a good mathematical model gives near-reality results. Three methods of modeling solutions from the rate equations are presented and analyzed. A method based on the rate equations modeled in Simulink to describe quantum well lasers was presented. For different signal types like step function, saw tooth and sinus used as input, a good response of the used equations is obtained. Circuit model resulting from one of the rate equations models is presented and simulated in SPICE. Results show a good modeling behavior. Numerical simulation in MathCad gives satisfactory results for the study of the transitory and dynamic operation at small level of the injection current. The obtained numerical results show the specific limits of each model, according to theoretical analysis. Based on these results, software can be built that integrates circuit simulation and other modeling methods for quantum well lasers to have a tool that model and analysis these devices from all points of view.

  3. Quantum well nonlinear microcavities

    Science.gov (United States)

    Oudar, J. L.; Kuszelewicz, R.; Sfez, B.; Pellat, D.; Azoulay, R.

    We report on recent progress in reducing the power threshold of all-optical bistable quantum well vertical microcavities. Significant improvements are achieved through an increase of the cavity finesse, together with a reduction of the device active layer thickness. A critical intensity of 5 μW/μm 2 has been observed on a microcavity of finesse 250, with a nonlinear medium of only 18 GaAs quantum wells of 10 nm thickness. Further improvements of the Bragg mirror quality resulted in a finesse of 700 and a power-lifetime product of 15 fJ/μm 2. Microresonator pixellation allows to obtain 2-dimensional arrays. A thermally-induced alloy-mixing technique is described, which produced a 110 meV carrier confinement energy, together with a refractive index change of -.012, averaged over the 2.6 μm nonlinear medium thickness. The resulting electrical and optical confinement is shown to improve the nonlinear characteristics, by limiting lateral carrier diffusion and light diffraction.

  4. 压力性生活事件对青少年主观幸福感的影响机制%The impact mechanism of stressful life events on adolescents' subjective well-being

    Institute of Scientific and Technical Information of China (English)

    傅俏俏; 叶宝娟; 温忠麟

    2012-01-01

    Based on the coping interaction model, stress-buffering hypothesis and stress-vulnerability hypothesis, we constructed a moderated mediating model in which coping style mediated the relationship between stressful life events and subjective well-being, and this mediating process was moderated by emotional intelligence. A total of 1670 adolescents were assessed by a set of tools including: an adolescent self-rating life events check list, a coping style questionnaire, an emotional intelligence scale, and a subjective well-being questionnaire. The results indicated that : ( 1 ) coping style mediated the effect of stressful life events on subjective well-being; (2) emotional intelligence moderated the effect of stressful life events on coping style: in the context of low stressful life events, adolescents with high levels of emotional intelligence performed better in coping style than those with low levels of emotional intelligence ; whereas in the context of high stressful life events, adolescents with high levels of emotional intelligence performed dose to even worse than those with low levels of emotional intelligence. As a conclusion, emotional intelligence is a stress vulnerable factor.%在应对的交互作用模式、压力缓冲与压力易损性假说基础上提出一个有调节的中介模型,探讨应对方式在青少年压力性生活事件与主观幸福感之间的中介效应,以及情绪智力的调节效应。被试为1670名青少年,研究工具包括青少年生活事件量表、特质应对方式问卷、情绪智力量表和主观幸福感问卷。结果显示:(1)应对方式在压力性生活事件与主观幸福感之间起部分中介作用。(2)情绪智力在压力性生活事件对应对方式的影响中起调节作用:在低压力性生活事件下,高情绪智力的青少年应对方式较好,在高压力性生活事件下,不论情绪智力如何,应对方式都不好。情绪智力是压力易损因子。

  5. Well maintenance evaluation.

    Energy Technology Data Exchange (ETDEWEB)

    McGhan, V.L.

    1978-10-01

    The ground-water monitoring program is an integral part of the total environmental surveillance program for the Hanford Site. Extensive ground-water data have been collected and studied over the past several decades. All of this data is, of course, dependent upon the quality of the ground-water sampling structures. A program to upgrade the quality of ground-water sampling was initiated in early 1974. That program also included changes to avoid cross-contamination of ground-water samples by installing permanently mounted individual pumps in many of the sampling wells. These two programs have resulted in increased reliability of both the ground-water samples and the analytical data. This basic quality assurance effort has provided a high level of confidence in ground-water surveillance. The current program is providing data with reliabilities not previously attainable.

  6. Geometric mechanics

    CERN Document Server

    Muniz Oliva, Waldyr

    2002-01-01

    Geometric Mechanics here means mechanics on a pseudo-riemannian manifold and the main goal is the study of some mechanical models and concepts, with emphasis on the intrinsic and geometric aspects arising in classical problems. The first seven chapters are written in the spirit of Newtonian Mechanics while the last two ones as well as two of the four appendices describe the foundations and some aspects of Special and General Relativity. All the material has a coordinate free presentation but, for the sake of motivation, many examples and exercises are included in order to exhibit the desirable flavor of physical applications.

  7. Abandoning wells working group

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The primary objective of this working group is to identify major technical, regulatory, and environmental issues that are relevant to the abandonment of offshore wellbores. Once the issues have been identified, the working group also has the objective of making recommendations or providing potential solutions for consideration. Areas for process improvement will be identified and {open_quotes}best practices{close_quotes} will be discussed and compared to {open_quotes}minimum standards.{close_quotes} The working group will primarily focus on wellbore abandonment in the Gulf of Mexico. However, workshop participants are encouraged to discuss international issues which may be relevant to wellbore abandonment practices in the Gulf of Mexico. The Abandoning Wells Group has identified several major areas for discussion that have concerns related to both operators and service companies performing wellbore abandonments in the Gulf of Mexico. The following broad topics were selected for the agenda: (1) MMS minimum requirements and state regulations. (2) Co-existence of best practices, new technology, and P & A economics. (3) Liability and environmental issues relating to wellbore abandonment.

  8. Geothermal Reservoir Well Stimulation Program: technology transfer

    Energy Technology Data Exchange (ETDEWEB)

    1980-05-01

    Each of the following types of well stimulation techniques are summarized and explained: hydraulic fracturing; thermal; mechanical, jetting, and drainhole drilling; explosive and implosive; and injection methods. Current stimulation techniques, stimulation techniques for geothermal wells, areas of needed investigation, and engineering calculations for various techniques. (MHR)

  9. Stimulation Technologies for Deep Well Completions

    Energy Technology Data Exchange (ETDEWEB)

    None

    2003-09-30

    The Department of Energy (DOE) is sponsoring the Deep Trek Program targeted at improving the economics of drilling and completing deep gas wells. Under the DOE program, Pinnacle Technologies is conducting a study to evaluate the stimulation of deep wells. The objective of the project is to assess U.S. deep well drilling & stimulation activity, review rock mechanics & fracture growth in deep, high pressure/temperature wells and evaluate stimulation technology in several key deep plays. An assessment of historical deep gas well drilling activity and forecast of future trends was completed during the first six months of the project; this segment of the project was covered in Technical Project Report No. 1. The second progress report covers the next six months of the project during which efforts were primarily split between summarizing rock mechanics and fracture growth in deep reservoirs and contacting operators about case studies of deep gas well stimulation.

  10. Phosphate based oil well cements

    Science.gov (United States)

    Natarajan, Ramkumar

    The main application of the cement in an oil well is to stabilize the steel casing in the borehole and protect it from corrosion. The cement is pumped through the borehole and is pushed upwards through the annulus between the casing and the formation. The cement will be exposed to temperature and pressure gradients of the borehole. Modified Portland cement that is being used presently has several shortcomings for borehole sealant. The setting of the Portland cement in permafrost regions is poor because the water in it will freeze even before the cement sets and because of high porosity and calcium oxide, a major ingredient it gets easily affected by the down hole gases such as carbon dioxide. The concept of phosphate bonded cements was born out of considerable work at Argonne National Laboratory (ANL) on their use in stabilization of radioactive and hazardous wastes. Novel cements were synthesized by an acid base reaction between a metal oxide and acid phosphate solution. The major objective of this research is to develop phosphate based oil well cements. We have used thermodynamics along with solution chemistry principles to select calcined magnesium oxide as candidate metal oxide for temperatures up to 200°F (93.3°C) and alumina for temperatures greater than 200°F (93.3°C). Solution chemistry helped us in selecting mono potassium phosphate as the acid component for temperatures less than 200°F (93.3°C) and phosphoric acid solution greater than 200°F (93.3°C). These phosphate cements have performance superior to common Portland well cements in providing suitable thickening time, better mechanical and physical properties.

  11. Respiratory mechanics

    CERN Document Server

    Wilson, Theodore A

    2016-01-01

    This book thoroughly covers each subfield of respiratory mechanics: pulmonary mechanics, the respiratory pump, and flow. It presents the current understanding of the field and serves as a guide to the scientific literature from the golden age of respiratory mechanics, 1960 - 2010. Specific topics covered include the contributions of surface tension and tissue forces to lung recoil, the gravitational deformation of the lung, and the interdependence forces that act on pulmonary airways and blood vessels. The geometry and kinematics of the ribs is also covered in detail, as well as the respiratory action of the external and internal intercostal muscles, the mechanics of the diaphragm, and the quantitative compartmental models of the chest wall is also described. Additionally, flow in the airways is covered thoroughly, including the wave-speed and viscous expiratory flow-limiting mechanisms; convection, diffusion and the stationary front; and the distribution of ventilation. This is an ideal book for respiratory ...

  12. Stimulation Technologies for Deep Well Completions

    Energy Technology Data Exchange (ETDEWEB)

    Stephen Wolhart

    2005-06-30

    The Department of Energy (DOE) is sponsoring the Deep Trek Program targeted at improving the economics of drilling and completing deep gas wells. Under the DOE program, Pinnacle Technologies conducted a study to evaluate the stimulation of deep wells. The objective of the project was to review U.S. deep well drilling and stimulation activity, review rock mechanics and fracture growth in deep, high-pressure/temperature wells and evaluate stimulation technology in several key deep plays. This report documents results from this project.

  13. Spin photocurrents in quantum wells

    CERN Document Server

    Ganichev, S D

    2003-01-01

    Spin photocurrents generated by homogeneous optical excitation with circularly polarized radiation in quantum wells (QWs) are reviewed. The absorption of circularly polarized light results in optical spin orientation due to the transfer of the angular momentum of photons to electrons of a two-dimensional electron gas. It is shown that in QWs belonging to one of the gyrotropic crystal classes a non-equilibrium spin polarization of uniformly distributed electrons causes a directed motion of electrons in the plane of the QW. A characteristic feature of this electric current, which occurs in unbiased samples, is that it reverses its direction upon changing the radiation helicity from left-handed to right-handed and vice versa. Two microscopic mechanisms are responsible for the occurrence of an electric current linked to a uniform spin polarization in a QW: the spin polarization-induced circular photogalvanic effect and the spin-galvanic effect. In both effects the current flow is driven by an asymmetric distribut...

  14. STIMULATION TECHNOLOGIES FOR DEEP WELL COMPLETIONS

    Energy Technology Data Exchange (ETDEWEB)

    Stephen Wolhart

    2003-06-01

    The Department of Energy (DOE) is sponsoring a Deep Trek Program targeted at improving the economics of drilling and completing deep gas wells. Under the DOE program, Pinnacle Technologies is conducting a project to evaluate the stimulation of deep wells. The objective of the project is to assess U.S. deep well drilling & stimulation activity, review rock mechanics & fracture growth in deep, high pressure/temperature wells and evaluate stimulation technology in several key deep plays. Phase 1 was recently completed and consisted of assessing deep gas well drilling activity (1995-2007) and an industry survey on deep gas well stimulation practices by region. Of the 29,000 oil, gas and dry holes drilled in 2002, about 300 were drilled in the deep well; 25% were dry, 50% were high temperature/high pressure completions and 25% were simply deep completions. South Texas has about 30% of these wells, Oklahoma 20%, Gulf of Mexico Shelf 15% and the Gulf Coast about 15%. The Rockies represent only 2% of deep drilling. Of the 60 operators who drill deep and HTHP wells, the top 20 drill almost 80% of the wells. Six operators drill half the U.S. deep wells. Deep drilling peaked at 425 wells in 1998 and fell to 250 in 1999. Drilling is expected to rise through 2004 after which drilling should cycle down as overall drilling declines.

  15. Engineering mechanics

    CERN Document Server

    Gross, Dietmar; Schröder, Jörg; Wall, Wolfgang A; Rajapakse, Nimal

    Statics is the first volume of a three-volume textbook on Engineering Mechanics. The authors, using a time-honoured straightforward and flexible approach, present the basic concepts and principles of mechanics in the clearest and simplest form possible to advanced undergraduate engineering students of various disciplines and different educational backgrounds. An important objective of this book is to develop problem solving skills in a systematic manner. Another aim of this volume is to provide engineering students as well as practising engineers with a solid foundation to help them bridge the gap between undergraduate studies on the one hand and advanced courses on mechanics and/or practical engineering problems on the other. The book contains numerous examples, along with their complete solutions. Emphasis is placed upon student participation in problem solving. The contents of the book correspond to the topics normally covered in courses on basic engineering mechanics at universities and colleges. Now in i...

  16. Private Well Water and Fluoride

    Science.gov (United States)

    ... well. What do I need to know about fluoride and groundwater from a well? Fluoride is present ... well has less than the recommended level of fluoride for preventing tooth decay? The recommended fluoride level ...

  17. Wave-packet dynamics in quantum wells

    DEFF Research Database (Denmark)

    Kuznetsov, A. V.; Sanders, G. D.; Stanton, C. J.

    1995-01-01

    It has been recently recognized that in bulk semiconductors the displacement current caused by ultrafast optical generation of ''polarized pairs'' in the applied de field is an important mechanism of charge transport in addition to the usual transport current. In quantum-well systems, this polari......It has been recently recognized that in bulk semiconductors the displacement current caused by ultrafast optical generation of ''polarized pairs'' in the applied de field is an important mechanism of charge transport in addition to the usual transport current. In quantum-well systems......, this polarized pair creation is thought to be the only source of photocurrent at the early stages of photoexcitation since the bulk like transport current is inhibited by the barriers. In this work we perform a full quantum-mechanical analysis of ultrafast optical excitation in a de-biased quantum well. We take...... larger than the well width (for long pulses and/or narrow wells), we recover the polarized pairs behavior of the photocurrent. For shorter pulses, when the coherence length becomes comparable to the well width, the photocurrent exhibits quantum beats. Finally, for very short pulses (around 10 fs) we find...

  18. Hanford well custodians. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Schatz, A.L.; Underwood, D.J.

    1995-02-02

    The Hanford Site Groundwater Protection Management Program recognized the need to integrate monitoring well activities in a centralized manner. A key factor to Hanford Site well integration was the need to clearly identify a responsible party for each of the wells. WHC was asked to identify all wells on site, the program(s) using each well, and the program ultimately responsible for the well. This report lists the custodian and user(s) for each Hanford well and supplies a comprehensive list of all decommissioned and orphaned wells on the Hanford Site. This is the first update to the original report released in December 1993.

  19. Well data summary sheets. Vol. 30. North Sea wells

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This thirtieth volume of the `Well Data Summary sheets` includes data from three recently released offshore wells from the North Sea. The two wells Amalie-1/1A and Skarv-1 are situated in the Danish Central Graben area. The Ida-1 well is one of a number of Danish North Sea wells situated outside the Central Graben (se also Volume 25). Minor corrections have been made since the first edition. The `Complete index of released wells` had been updated. Volume 27, 28 and 29 are regional volumes; volume 27 includes well data from Southern Jutland; volumes 28 and 29 cover well data from Northern Jutland. All data from released Danish North Sea wells are included in volumes 17-26 and 30. Data references are made to the revised volumes and not to the original published reference. (au)

  20. Dry Well Storage Facility conceptual design study

    Energy Technology Data Exchange (ETDEWEB)

    1979-02-01

    The Dry Well Storage Facility described is assumed to be located adjacent to or near a Spent Fuel Receiving and Packaging Facility and/or a Packaged Fuel Transfer Facility. Performance requirements, quality levels and codes and standards, schedule and methods of performance, special requirements, quality assurance program, and cost estimate are discussed. Appendices on major mechanical equipment and electric power requirements are included.

  1. Well data summary sheets. Vol. 33: North sea wells

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This 33rd volume of the `Well Data Summary sheets` includes data from seven recently released offshore wells from the North Sea. The wells Baron-2, S.E. Adda-1 and Skjold Flank-1 were presented in our `Well Data Summary Sheets, special volume`, published May 1, 1997. In volume 33, the wells Baron-2 and Skjold Flank-1 are updated with respect to information on sidewall cores. Information regarding all released well data, included in our well data summary sheets, are available on GEUS homepage: http://www.geus.dk/ or the departments homepage: http://www.geus.dk/departments/geol-info-data-centre/geoldata.htm/. A complete index of releases wells in volumes 17-33 is included. (au)

  2. Resonant Tunneling in Barrier-in-Well and Well-in-Well Structures

    Institute of Scientific and Technical Information of China (English)

    YAO Jiang-Hong; JIA Guo-Zhi; ZHANG Yan; LI Wei-Wu; SHU Yong-Chun; WANG Zhan-Guo; XU Jing-Jun

    2008-01-01

    @@ A Schr(o)dinger equation is solved numerically for a barrier in a quantum well and a quantum well in another well structure by the transfer matrix technique.Effect of structure parameters on the transmission probabilities is investigated in detail.The results suggest that symmetry plays an important role in the coupling effect between the quantum wells.The relationship between the width of the inner well and the resonant energy levels in well-in-well structures is also studied.It is found that the ground state energy and the second resonant energy decrease with increasing width of the inner well, while the first resonant energy remains constant.

  3. Raft River well stimulation experiments: geothermal reservoir well stimulation program

    Energy Technology Data Exchange (ETDEWEB)

    1980-08-01

    The Geothermal Reservoir Well Stimulation Program (GRWSP) performed two field experiments at the Raft River KGRA in 1979. Wells RRGP-4 and RRGP-5 were selected for the hydraulic fracture stimulation treatments. The well selection process, fracture treatment design, field execution, stimulation results, and pre- and post-job evaluations are presented.

  4. Mechanical engineering education

    CERN Document Server

    Davim, J Paulo

    2012-01-01

    Mechanical Engineering is defined nowadays as a discipline "which involves the application of principles of physics, design, manufacturing and maintenance of mechanical systems". Recently, mechanical engineering has also focused on some cutting-edge subjects such as nanomechanics and nanotechnology, mechatronics and robotics, computational mechanics, biomechanics, alternative energies, as well as aspects related to sustainable mechanical engineering.This book covers mechanical engineering higher education with a particular emphasis on quality assurance and the improvement of academic

  5. A simple deep monitoring well dilution technique.

    Science.gov (United States)

    Rogiers, Bart; Labat, Serge; Gedeon, Matej; Vandersteen, Katrijn

    2015-04-01

    Well dilution techniques are well known and studied as one of the basic techniques to quantify groundwater fluxes. A typical well dilution test consists of the injection of a tracer, a mixing mechanism (e.g. water circulation with a pump) to achieve a homogeneous concentration distribution within the well, and monitoring of the evolution of tracer concentration with time. An apparent specific discharge can be obtained from such a test, and when details on the well construction are known, it can be converted into a specific discharge representative of the undisturbed aquifer. For deep wells however, the injection of tracer becomes less practical and the use of pumps for circulating and mixing the water becomes problematic. This is due to the limited pressure that common pumps can endure at the outlet, as well as the large volume of water that makes it difficult to achieve a homogeneous concentration, and the impracticalities of getting a lot of equipment to large depths in very small monitoring wells. Injection and monitoring of tracer at a specific depth omits several of the problems with deep wells. We present a very simple device that can be used to perform a dilution test at a specific depth in deep wells. The injection device consists of a PVC tube with a detachable rubber seal at its bottom. To minimize disturbance of the water column in the well, we integrated an EC sensor in this injection device, which enables us to use demineralized water or dissolved salts as a tracer. Once at the target depth, the PVC tube is retracted and the EC sensor and tracer become subject to groundwater flow. The device was tested on a shallow well, on which different types of dilution tests were performed. The results of the other tests agree well with the injection tube results. Finally, the device was used to perform a dilution test in a deep well in order to demonstrate the feasibility of the approach.

  6. Quantum mechanics

    CERN Document Server

    Rae, Alastair I M

    2007-01-01

    PREFACESINTRODUCTION The Photoelectric Effect The Compton Effect Line Spectra and Atomic Structure De Broglie Waves Wave-Particle Duality The Rest of This Book THE ONE-DIMENSIONAL SCHRÖDINGER EQUATIONS The Time-Dependent Schrödinger Equation The Time-Independent Schrödinger Equation Boundary ConditionsThe Infinite Square Well The Finite Square Well Quantum Mechanical Tunneling The Harmonic Oscillator THE THREE-DIMENSIONAL SCHRÖDINGER EQUATIONS The Wave Equations Separation in Cartesian Coordinates Separation in Spherical Polar Coordinates The Hydrogenic Atom THE BASIC POSTULATES OF QUANTUM MEC

  7. China's Wellness Revolution

    Institute of Scientific and Technical Information of China (English)

    MarkGodfrey

    2004-01-01

    SEVERAL years after its publication, the Wellness Revolution remains a cult best-selling book. Its writer, businessman and motivational speaker Paul Zane Pilzer, advised investors and ama-teur stock market players that "wellness" would be the next tril-

  8. Creating Wellness in Your Schools.

    Science.gov (United States)

    Tager, Mark J.

    1983-01-01

    Wellness programs emphasize positive motivation and usually include health awareness campaigns, behavior change programs, and cost containment strategies. Guides are offered for beginning wellness programs in school districts. (MLF)

  9. School wellness team best practices to promote wellness policy implementation.

    Science.gov (United States)

    Profili, Erika; Rubio, Diana S; Lane, Hannah G; Jaspers, Lea H; Lopes, Megan S; Black, Maureen M; Hager, Erin R

    2017-08-01

    Schools with wellness teams are more likely to implement federally mandated Local Wellness Policies (LWPs, Local Education Agency-level policies for healthy eating/physical activity). Best practices have been developed for wellness teams based on minimal empirical evidence. The purpose of this study is to determine, among schools with wellness teams, associations between LWP implementation and six wellness team best practices (individually and as a sum score). An online survey targeting Maryland school wellness leaders/administrators (52.4% response rate, 2012-2013 school year) was administered that included LWP implementation (17-item scale: categorized as no, low, and high implementation) and six wellness team best practices. Analyses included multi-level multinomial logistic regression. Wellness teams were present in 311/707 (44.0%) schools, with no (19.6%), low (36.0%), and high (44.4%) LWP implementation. A sum score representing active wellness teams (mean=2.6) included: setting healthy eating/physical activity goals (66.9%), informing the public of LWP activities (71.4%), meeting ≥4times/year (45.8%), and having school staff (46.9%), parent (25.4%), or student (14.8%) representation. In adjusted models, goal setting, meeting ≥4times/year, and student representation were associated with high LWP implementation. For every one-unit increase in active wellness team sum score, schools were 41% more likely to be in high versus no implementation (Likelihood Ratio=1.41, 95% C.I.=1.13, 1.76). In conclusion, wellness teams meeting best practices are more likely to implement LWPs. Interventions should focus on the formation of wellness teams with recommended composition/activities. Study findings provide support for wellness team recommendations stemming from the 2016 Healthy, Hunger-Free Kids Act final rule. Copyright © 2017. Published by Elsevier Inc.

  10. Insomnia and Well-Being

    Science.gov (United States)

    Hamilton, Nancy A.; Gallagher, Matthew W.; Preacher, Kristopher J.; Stevens, Natalie; Nelson, Christy A.; Karlson, Cynthia; McCurdy, Danyale

    2007-01-01

    Most Americans have occasional problems with insomnia. The relationship of insomnia to illness is well known. However, insomnia may also relate to lower levels of well-being. Although there are various definitions of well-being, one of the most clearly articulated and comprehensive models identifies 2 overarching constructs, psychological…

  11. 大学生的社会支持、孤独及自尊对主观幸福感的作用机制研究%The Mechanism of the Influence of Social Support, Loneliness, and Self-esteem on Subjective Well-being

    Institute of Scientific and Technical Information of China (English)

    孔风; 王庭照; 李彩娜; 和娟; 王瑾; 游旭群

    2012-01-01

    对389名大学生施测社会支持量表、自尊量表、社会与感情孤独量表及主观幸福感量表,以探讨孤独和自尊在社会支持与主观幸福感的关系中的作用。结果表明:(1)主观幸福感与社会支持、自尊、孤独呈显著相关。(2)路径分析表明,自尊、孤独分别在社会支持与主观幸福感之间起显著的中介作用。社会支持-自尊-孤独-主观幸福感的显著路径表明,这些变量间存在更为复杂的关系。这些结果对于大学生心理健康教育具有重要的意义。%Subjective well-being has been an important area of research in positive psychology, which reflects individuals' affective and cognitive evaluations of their lives. Numerous studies provide evidence for the positive relationship between social support and subjective well-being. In addition to such direct associations, a series of studies have further identified mediators to explain the underlying mechanisms of the link between social support and subjective well-being. Previous studies have corroborated self-esteem and lone liness as a mediators between social support and subjective well-being. And the more complicated relationships among these variables deserve much more attention from the researchers. In addition, the majority of the studies on early adults were conducted in western cultures. Re- searchers have agreed that it is necessary to examine the generalizability of the findings to other cultures. The current study was designed to test the concurrent mediating effects of self-esteem and loneliness for the relationship between social support and subjective well-being, which have been examined separately in previous studies, and the more complex relationships among these variables in Chinese culture. A total of 389 college students ( 129 boys and 260 girls) from two Chinese universities completed a survey that included the social support rating scale, the emotional and social

  12. Wellness as a worldwide phenomenon?

    Science.gov (United States)

    Elliott, Heather; Bernstein, Jennifer; Bowman, Diana M

    2014-10-01

    This article examines the concept of wellness through a comparative political economy and legal framework. It asks whether wellness, an increasingly defined term within US federal and state legislative instruments including, for example, the Patient Protection and Affordable Care Act, is primarily a US-centric phenomenon. Or is wellness, in its various different guises, a worldwide phenomenon? By focusing on three distinctly different jurisdictions - the United States, Germany, and Australia - this article examines wellness through the lens of employers, the health care system, employment and tort law, and the greater political economy. It notes that while improving employee health, well-being, and productivity is common across the three countries and their respective cultures, the focus on wellness as a distinct legal concept is unique to the United States. Copyright © 2014 by Duke University Press.

  13. Quantum Chaos and Statistical Mechanics

    OpenAIRE

    Srednicki, Mark

    1994-01-01

    We briefly review the well known connection between classical chaos and classical statistical mechanics, and the recently discovered connection between quantum chaos and quantum statistical mechanics.

  14. Well sealing via thermite reactions

    Energy Technology Data Exchange (ETDEWEB)

    Lowry, William Edward; Dunn, Sandra Dalvit

    2016-11-15

    A platform is formed in a well below a target plug zone by lowering a thermite reaction charge into the well and igniting it, whereby the products of the reaction are allowed to cool and expand to form a platform or support in the well. A main thermite reaction charge is placed above the platform and ignited to form a main sealing plug for the well. In some embodiments an upper plug is formed by igniting an upper thermite reaction charge above the main thermite reaction charge. The upper plug confines the products of ignition of the main thermite reaction charge.

  15. The new frontier of wellness.

    Science.gov (United States)

    Clark, Ann D

    2008-01-01

    Businesses should focus on a proactive solution to rising health care costs, using integrated wellness programs that emphasize condition management and total health and well-being. If corporations wish to remain competitive, profitable and successful in attracting and retaining topnotch talent from all generations, they are going to have to start investing in and thinking creatively about wellness offerings. Not only do wellness programs have a proven track record of success in reducing health care costs, they also resonate loud and clear with modern-day employees who are determined to work for a company that understands their needs and is willing to make progress with the employee's best interests in mind.

  16. Resonant Optical Absorption in Semiconductor Quantum Wells

    Institute of Scientific and Technical Information of China (English)

    YU Li-Yuan; CAO Jun-Cheng

    2004-01-01

    @@ We have calculated the intraband photon absorption coefficients of hot two-dimensional electrons interacting with polar-optical phonon modes in quantum wells. The dependence of the photon absorption coefficients on the photon wavelength λ is obtained both by using the quantum mechanical theory and by the balance-equation theory. It is found that the photon absorption spectrum displays a local resonant maximum, corresponding to LO energy, and the absorption peak vanishes with increasing the electronic temperature.

  17. Water Well Locations - MO 2012 Certified Wells (SHP)

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This data set provides information about wells that are certified by the State of Missouri. The parent data set is the Wellhead Information Management System (WIMS)...

  18. Community College Employee Wellness Programs

    Science.gov (United States)

    Thornton, L. Jay; Johnson, Sharon

    2010-01-01

    This paper describes the prevalence and characteristics of employee wellness programs in public community colleges accredited by the Southern Association of Colleges and Schools (SACS). A random sample of 250 public community colleges accredited by SACS was mailed a 46-item employee-wellness program survey. The survey solicited program information…

  19. Well test analysis for wells producing layered reservoirs with crossflow

    Energy Technology Data Exchange (ETDEWEB)

    Raghavan, R.; Prijambodo, R.; Reynolds, A.C.

    1985-06-01

    The pressure response of a well producing a two-layer reservoir with crossflow is examined. Virtually all studies on the response of a well in multilayered systems with crossflow claim that after a few hours of production these systems behave as if they are single-layer systems. In this study, the authors show that the flowing pressure response of a well at early times can be divided into three flow periods. The first period is one in which the reservoir behaves as if it were a stratified (no-crossflow) system. This period is followed by a transitional period. The response of the well during this period depends on the contrast in horizontal permeabilities and on the degree of communication between the layers. During the third period, the reservoir can be described by an equivalent single-layer system. An examination of the time ranges of the various flow periods indicates that, unless tests are designed properly, most of the interpretable pressure buildup data would be measured during the time the well response is influenced by the transitional period. The influence of the skin regions on the well response is examined. The significance of the estimate of the skin factor obtained from a pressure test is discussed. The authors show that the nature and the magnitude of the skin regions and the size of the reservoir determine the applicability of conventional semilog procedures to systems with interlayer communication.

  20. Financial Well-being in Active Ageing.

    Science.gov (United States)

    Rajola, Federico; Frigerio, Chiara; Parrichi, Monica

    2014-01-01

    In developed countries, economic and financial well-being is playing a crucial positive role in ageing and inclusion processes. Due to the complexity and pervasiveness of financial economy in the real life, more and more social as well as individual well-being are perceived as influenced by financial conditions. On the other hand, the demographic circumstances drive scholars as well as politicians to reflect on ageing dynamics. Bridging the two domains, the following research focuses on the role of the financial well-being as a mediating role of general well-being in elder people. The assumption is that elderly people have specific financial needs that sometimes are not covered by financial providers' offers. The motivation is mainly on the role of information asymmetries between elder consumers and financial institutions. On the dynamics of these asymmetries, the research will specifically investigate the role of financial literacy, as the ability of comprehension of elder people of their needs and of financial information. The applicative implication of this research work consists in finding the determinants of financial well-being for elders and the definition of their specific financial competencies, in order to 1) identify educational and regulatory guidelines for policy makers in charge of creating financial market transparency conditions, and to 2) support design of organizational mechanisms as well as financial product/services for this specific target of client. The following chapter presents preliminary explorative results of a survey delivered on 200 elder individuals (65-80 yrs.) leaving in Milan. Findings show that active elders consider the ability of managing personal wealth as one of the core determinant of well-being, although the economic and financial literacy is limited. Furthermore, the chapter proposes a research agenda for scholars interested in exploring the relationship between financial well-being and ageing.

  1. as well as, as well, might as well 之用法

    Institute of Scientific and Technical Information of China (English)

    盛艳明

    2009-01-01

    1. as well as =not only/just … but(also),但两者在意义上有不同之处:as well as 侧重前者,而not only /just…but (also)侧重后者,通常要理解为A as well as B=not only/just B but(also) A。如:

  2. Modeling multiaquifer wells with MODFLOW.

    Science.gov (United States)

    Neville, Christopher J; Tonkin, Matthew J

    2004-01-01

    Multiaquifer wells, i.e., wells that are open across more than one aquifer, can have a profound effect on the hydraulics of a ground water system. These wells change the physical system by establishing direct hydraulic links between otherwise isolated strata. Several methods are available to simulate multiaquifer wells in the context of comprehensive ground water flow simulators. In this paper, we review four methods to represent multiaquifer wells with the widely used code MODFLOW. These methods include a specialized code developed, but never formally released, by the U.S. Geological Survey (USGS), the Multi-Aquifer Well (MAW1) Package. An expanded implementation of the techniques in the MAW1 Package has been incorporated in the Multi-Node Well Package released recently by the USGS (Halford and Hanson 2002). We examine the performance of the methods in the context of a benchmarking study against the analytical solutions of Papadopulos (1966) and Sokol (1963). Our results demonstrate that results obtained with the MAW1 Package closely match exact solutions for pumping and nonpumping conditions, using both coarse and refined grids.

  3. THE PRODUCTIVITY OF WELL PATTERN WITH HORIZONTAL WELLS AND VERTICAL WELLS

    Institute of Scientific and Technical Information of China (English)

    Zhao Chun-sen; Cui Hai-qing; Song Wen-ling; Zhang Zhen

    2003-01-01

    The calculation of productivity and the choice of well pattern of mixed horizontal and vertical wells were discussed in this paper. Because the naturall drainage areas of horizontal wells are oval rather than circular, rectangular drainage well patterns should be adopted. Using pseudo 3-dimensional method and conformal transformation, the potential function of a row of horizontal wells was deduced. Using this function and the superposition principle, an analytical solution of the productivity for the rectangular mixed well pattern was given. Quantitative means for defining the shapes of the optimum pattern were developed in this paper by introducing two dimensionless parameters, the shape factor and dimensionless length of horizontal well. The formula for productvity was used to optimize the mixed well patterns. The curves of the optimized shape factor against dimensionless length of horizontal well were drawn. The results show that the pattern area and formation thickness have no effect on the optimal shape factors and can be applied to the design of development for oil fields.

  4. Well test analysis for Devonian-shale wells. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Serra, K.; Chen, C.C.; Yeh, N.S.; Ohaeri, C.; Reynolds, A.C.; Raghavan, R.

    1981-09-30

    This work presents broad interpretive rules for analyzing Devonian Shale Wells based on simulated drawdown and buildup tests. The report consists of four parts: (1) New Pressure Transient Analysis Methods for Naturally Fractured Reservoirs, (2) Pressure Transient Analysis Methods for Bounded Naturally Fractured Reservoirs, (3) Pressure Response at Observation Wells in Fractured Reservoirs, and (4) Unsteady Flow to a Well Produced at a Constant Pressure in a Fractured Reservoir. Each of these sections is an independent unit; that is, knowledge of the other sections, even though desirable, is not necessary to understand the material in a given section. The principal contribution of this work is the identification of a new flow regime during the early transient period. The discovery of this flow regime represents a major advance in our ability to analyze pressure transient tests. The identification of the new flow regime also explains the response of wells in fractured reservoirs that until now have been considered anomalous. Systematic procedures to analyze single well (drawdown and buildup) tests and multiwell (interference) tests are discussed.

  5. Session: Long Valley Exploratory Well

    Energy Technology Data Exchange (ETDEWEB)

    Tennyson, George P. Jr.; Finger, John T.; Eichelberger, John C.; Hickox, Charles E.

    1992-01-01

    This session at the Geothermal Energy Program Review X: Geothermal Energy and the Utility Market consisted of four presentations: ''Long Valley Exploratory Well - Summary'' by George P. Tennyson, Jr.; ''The Long Valley Well - Phase II Operations'' by John T. Finger; ''Geologic results from the Long Valley Exploratory Well'' by John C. Eichelberger; and ''A Model for Large-Scale Thermal Convection in the Long Valley Geothermal Region'' by Charles E. Hickox.

  6. “江蚁”群体工作幸福感的形成机理与提升策略%On the Formation Mechanism and Promoting Strategy of Work Well-being of Wuhan "Ant Tribe" Groups

    Institute of Scientific and Technical Information of China (English)

    夏季; 吴燕妮; 夏晶

    2011-01-01

    分析现阶段武汉"蚁族"群体(简称"江蚁")生活就业和工作幸福感状况,探讨"江蚁"工作幸福感的影响因素、形成机理和提升策略,以期改善"江蚁"的生活就业状况,促进武汉市城市和谐发展,提高武汉市企业人力资源管理水平。%This paper analyzed the present situation of life,employment and work well-being of Wuhan "ant tribe" groups,and discussed the influencing factors,formation mechanism and promotion strategy of their work well-being in order to improve the situation of life and employment of Wuhan "ant tribe" groups,promote the harmonious development of Wuhan city and improve enterprises′ human resources management in Wuhan.

  7. 7 Steps to Aging Well

    Science.gov (United States)

    ... Issue Past Issues Special Section 7 Steps to Aging Well Past Issues / Winter 2007 Table of Contents ... Exercise: A Guide from the National Institute on Aging is a publication from NIA that has strength, ...

  8. The well-being questionnaire

    DEFF Research Database (Denmark)

    Pouwer, F; Snoek, Frank J; Van Der Ploeg, Henk M

    2000-01-01

    analyses were conducted. Group B (N = 736) was split up into four subgroups of male or female patients with type 1 or type 2 diabetes. In these subgroups, confirmatory factor analyses were employed to test the model(s) developed in group A and the two models described in the literature (four-factor model......BACKGROUND: The Well-being Questionnaire (W-BQ) has been designed to measure psychological well-being in people with a chronic somatic illness and is recommended by the World Health Organization for widespread use. However, studies into the factor structure of this instrument are still limited....... This factor solution was stable across gender, type of diabetes and level of education. CONCLUSIONS: The best description of the factor structure of the Dutch translation of the W-BQ was given by a three-factor solution with 12 items (W-BQ12), measuring positive well-being (four items), negative well...

  9. Monitoring Animal Well-being

    DEFF Research Database (Denmark)

    Gronskyte, Ruta

    In recent years, animal well-being in industrial slaughterhouses has become a significant concern for consumers, farmers, and meat producers. Different groups have different interpretations of animal well-being. For the majority of consumers, animal well-being is highly influenced by their values......, it is common to mix pigs from different farmers in one area. Such mixing can cause fights between pigs, which can lead to additional stress or the animals being harmed. The unfamiliar environment also increases the animals’ stress levels. In some industrial slaughterhouses, up to 62,000 pigs per week...... are handled. Ensuring the well-being of such large numbers of pigs using only personnel is a complicated task. Video surveillance of humans has been widely used to ensure safety and order in multiple situations. Methods have been developed to detect individual actions or abnormal behavior in small groups...

  10. Wellness strategies for smaller businesses.

    Science.gov (United States)

    Neely, Marc

    2012-01-01

    While innovative smaller companies are implementing employee wellness programs, many smaller firms may point to a lack of resources, such as staffing and financial resources, to establish and sustain a wellness program. The uncertain economy and rising health care costs have caused many smaller businesses to focus on core business strategies to keep the doors open and the business going. However, innovative companies realize that building a culture of health is a long-term business strategy directly related to improving the bottom line. This article highlights one company's approach to wellness and the results of the company's programs. It also outlines the components of a successful wellness program and suggests practical implementation steps for smaller businesses.

  11. 产水气井井筒携砂机制及携砂能力评价试验与应用%Experimental study on mechanism and capability of sand-carrying in water-producing gas wells and its application

    Institute of Scientific and Technical Information of China (English)

    董长银; 陈新安; 阿雪庆; 陈宇; 康瑞鑫; 冯胜利

    2014-01-01

    对垂直井筒不同水气比和含砂体积分数下的气水砂三相流动机制及气水携砂能力进行系统的试验研究。通过试验得到单相气体携砂和气水携砂临界流速与砂粒径的定量关系和规律。根据试验数据揭示的气液携砂机制,建立不产水和产水气井的临界携砂流速模型,用于预测给定生产条件下的携砂条件和携砂能力,并提出考虑井筒携砂的新型气井综合协调曲线用于实际气井工况分析和制度调整。结果表明:一旦气井见水,气井携砂能力将比不产水条件下严重降低,气体流速和水气比是控制携砂动态的主要因素;随着水气比从零开始升高,流型依次为无携砂现象的泥状流、具有携砂能力的环雾流、段塞流,以及其他相同水气比条件下的气水两相流型;气液两相流要达到携砂条件,气体流速必须达到携液流速,并且液相流速要达到基本的单相液体携砂条件。%The gas-liquid-solid multi-phase flow in vertical wells was experimentally simulated to study the mechanism and capability of sand-carrying for gas wells with water production, in which the effects of gas and water flow rate, water-gas ratio (WGR) and sand volume fraction were investigated. Based on experimental results, the critical gas flow rate for sand-carry-ing and the relationship between the size of sands and gas and water flow rate were obtained. A sand-carrying evaluation mod-el for gas well with and without water production was developed. The model can be used to predict the critical gas flow rate for sand-carrying with various sand sizes and the maximum sand rate that can be carried by gas at a certain flow rate. A new integrated coordination chart was figured out for the evaluation of sand-carrying capability in gas wells with water and sand production. The results show that, once the well starts to produce water, its sand-carrying capability will be reduced com

  12. Statistical mechanics

    CERN Document Server

    Schwabl, Franz

    2006-01-01

    The completely revised new edition of the classical book on Statistical Mechanics covers the basic concepts of equilibrium and non-equilibrium statistical physics. In addition to a deductive approach to equilibrium statistics and thermodynamics based on a single hypothesis - the form of the microcanonical density matrix - this book treats the most important elements of non-equilibrium phenomena. Intermediate calculations are presented in complete detail. Problems at the end of each chapter help students to consolidate their understanding of the material. Beyond the fundamentals, this text demonstrates the breadth of the field and its great variety of applications. Modern areas such as renormalization group theory, percolation, stochastic equations of motion and their applications to critical dynamics, kinetic theories, as well as fundamental considerations of irreversibility, are discussed. The text will be useful for advanced students of physics and other natural sciences; a basic knowledge of quantum mechan...

  13. Potential of repeated polymer well treatments

    Energy Technology Data Exchange (ETDEWEB)

    Lakatos, I.; Lakatos-Szabo, J. (Hungarian Academy of Sciences, Budapest (Hungary)); Munkacsi, I.; Troemboeczki, S.

    1993-11-01

    This paper analyzes field results obtained by routine application of a polymer/silicate well treatment technique at the Algyo-2 field in Hungary. First, the reservoir is described briefly; then, the basic concept of the method is outlined. Reference is made to the multifunctioning chemical mechanism of gelation and the favorable rheological properties of the treating fluids that jointly result in a highly selective placement and an efficient permeability reduction in the target reservoir space. Application of the method 17 times in 16 producing wells yielded more than 90,000 Mg of incremental oil production. Typical well behaviors also are illustrated. Finally, the potential of repeated treatments is discussed, taking laboratory and field results into account.

  14. Quantum Well Infrared Photodetectors Physics and Applications

    CERN Document Server

    Schneider, Harald

    2007-01-01

    Addressed to both students as a learning text and scientists/engineers as a reference, this book discusses the physics and applications of quantum-well infrared photodetectors (QWIPs). It is assumed that the reader has a basic background in quantum mechanics, solid-state physics, and semiconductor devices. To make this book as widely accessible as possible, the treatment and presentation of the materials is simple and straightforward. The topics for the book were chosen by the following criteria: they must be well-established and understood; and they should have been, or potentially will be, used in practical applications. The monograph discusses most aspects relevant for the field but omits, at the same time, detailed discussions of specialized topics such as the valence-band quantum wells.

  15. Sediment–well interaction during depressurization

    KAUST Repository

    Shin, Hosung

    2016-10-05

    Depressurization gives rise to complex sediment–well interactions that may cause the failure of wells. The situation is aggravated when high depressurization is imposed on sediments subjected to an initially low effective stress, such as in gas production from hydrate accumulations in marine sediments. Sediment–well interaction is examined using a nonlinear finite element simulator. The hydro-mechanically coupled model represents the sediment as a Cam-Clay material, uses a continuous function to capture compressibility from low to high effective stress, and recognizes the dependency of hydraulic conductivity on void ratio. Results highlight the critical effect of hydro-mechanical coupling as compared to constant permeability models: A compact sediment shell develops against the screen, the depressurization zone is significantly smaller than the volume anticipated assuming constant permeability, settlement decreases, and the axial load on the well decreases; in the case of hydrates, gas production will be a small fraction of the mass estimated using a constant permeability model. High compressive axial forces develop in the casing within the production horizon, and the peak force can exceed the yield capacity of the casing and cause its collapse. Also tensile axial forces may develop in the casing above the production horizon as the sediment compacts in the depressurized zone and pulls down from the well. Well engineering should consider: slip joints to accommodate extensional displacement above the production zone, soft telescopic/sliding screen design to minimize the buildup of compressive axial force within the production horizon, and enlarged gravel pack to extend the size of the depressurized zone.

  16. All's Well That Ends Well: Shakespeare's treatment of anal fistula.

    Science.gov (United States)

    Cosman, B C

    1998-07-01

    Textual and contextual evidence suggests that the French king's fistula, a central plot device in Shakespeare's play All's Well That Ends Well, is a fistula-in-ano. Anal fistula was known to the lay public in Shakespeare's time. In addition, Shakespeare may have known of the anal fistula treatise of John Arderne, an ancestor on Shakespeare's mother's side. Shakespeare's use of anal fistula differs from all previous versions of the story, which first appeared in Boccaccio's Decameron and from its possible historical antecedent, the fistula of Charles V of France. This difference makes sense given the conventions of Elizabethan comedy, which included anal humor. It is also understandable when one looks at what wounds in different locations mean in European legend. In this light, it is not surprising that subsequent expurgations treat Boccaccio's and Shakespeare's fistulas differently, censoring only Shakespeare's. This reading has implications for the staging of All's Well That Ends Well, and for our view of the place of anal fistulas in cultural history.

  17. Key geologic factors and control mechanisms of water production and gas production divergences between CBM wells in Fanzhuang block%樊庄区块煤层气井产能差异的关键地质影响因素及其控制机理

    Institute of Scientific and Technical Information of China (English)

    刘世奇; 桑树勋; 李梦溪; 刘会虎; 黄华州; 张杰芳; 徐宏杰

    2013-01-01

    以樊庄区块16口煤层气井地质资料、排采资料为依据,分析了该区块煤层气井之间产水量和产气量差异的地质影响因素,并进一步探讨了这种差异的地质控制机理.研究结果表明:产水阶段,地下水流体势通过影响煤层水的流向和煤储层含水量控制煤层气井产水量,渗透率通过影响煤层水在储层中的流动能力控制煤层气井的产水量,煤储层渗透率与地下水流体势的负相关性促进了煤层气井之间产水量的差异;产气阶段,排水降压效果通过影响煤层气的解吸量及气、水两相的饱和度和相对渗透率控制煤层气井之间的产水量和产气量差异;另外,煤层气井连通后出现的气水分异现象,进一步促进了煤层气井之间产水量、产气量的差异.%Production characteristics of coal bed methane(CBM) wells in Fanzhuang block were studied. Geologic factors that affect divergences of water production and gas production between CBM wells were analyzed on the basis of geologic information and production data of 16 CBM wells. Geologic control mechanisms of the divergences were further studied. The results show that, in well dewatering stage, ground water fluid potential controls water production of CBM wells by affecting the flow directions of water and moisture content of coal bed reservoir. Permeability controls water production by affecting the flow capacity of water in coal bed. The negative correlation between ground water fluid potential and permeability accelerates the divergences of water production between CBM wells. In gas production stage, the decompression effect controls the divergences of water production and gas production by affecting the amount of de-sorption methane, saturation degree and effective permeability of water and gas in coal bed. If adjacent CBM wells are connected, gas/water separation in coal bed further accelerates the divergences of water production and gas production between CBM

  18. PRODUCTIVITY OF FRACTURED HORIZONTAL WELLS

    Directory of Open Access Journals (Sweden)

    Stjepan Antolović

    2009-12-01

    Full Text Available The interest and performance of horizontal drilling and completions has increased during the last two decades. Horizontal wells are advantageous compared to vertical wells in thin reservoirs, reservoirs with favorable vertical permeability and reservoirs with water and gas coning problems. In many reservoirs, the ratio of horizontal permeability to the vertical permeability is substantially larger than one and often is close to 10. Thus, these reservoirs are very good candidates for hydraulic fracturing. By hydraulic fracturing one or more fractures are created, which can be longitudinal or orthogonal. By that, flow is altered and it mostly conducts horizontally through reservoir toward horizontal wellbore. With this altered flow, fluid is produced faster, with less pressure loss by fluid unit of produced fluid. Some of the existing mathematical models to determine the productivity of multifractured horizontal wells are presented in this work (the paper is published in Croatian.

  19. Optimization of well field management

    DEFF Research Database (Denmark)

    Hansen, Annette Kirstine

    Groundwater is a limited but important resource for fresh water supply. Differ- ent conflicting objectives are important when operating a well field. This study investigates how the management of a well field can be improved with respect to different objectives simultaneously. A framework...... objectives. The sequential scheduling optimizes the management stepwise for daily time steps, and allows the final management to vary in time. The research shows that this method performs better than the constant scheduling when large variations in the hydrological conditions occur. This novel approach can...... multi-objective optimization framework has shown to be useful in optimizing the management of well fields, and it has successfully been applied to the two case studies, Hardhof and Søndersø waterworks. If the method is applied to all Danish waterworks it is estimated that 20-32 GWh/year could be saved...

  20. Quantum-Well Thermophotovoltaic Cells

    Science.gov (United States)

    Freudlich, Alex; Ignatiev, Alex

    2009-01-01

    Thermophotovoltaic cells containing multiple quantum wells have been invented as improved means of conversion of thermal to electrical energy. The semiconductor bandgaps of the quantum wells can be tailored to be narrower than those of prior thermophotovoltaic cells, thereby enabling the cells to convert energy from longer-wavelength photons that dominate the infrared-rich spectra of typical thermal sources with which these cells would be used. Moreover, in comparison with a conventional single-junction thermophotovoltaic cell, a cell containing multiple narrow-bandgap quantum wells according to the invention can convert energy from a wider range of wavelengths. Hence, the invention increases the achievable thermal-to-electrical energy-conversion efficiency. These thermophotovoltaic cells are expected to be especially useful for extracting electrical energy from combustion, waste-heat, and nuclear sources having temperatures in the approximate range from 1,000 to 1,500 C.

  1. Inhibiting scale in oil wells

    Energy Technology Data Exchange (ETDEWEB)

    D' Errico, M.J.; Adler, S.F.

    1972-09-27

    An oil well treatment is described to inhibit the formation of hard scale by precipitation from the oil well brine of scale-forming water insoluble sulfate, carbonate, and other salts. The process consists of incorporating into the oil well during a fracturing treatment, a fluid containing a solid polymeric material characterized by molecular weight in the range of 1,000 to 15,000 and a substantially linear structure, derived by the linear polymerization of at least one monoolefinically unsaturated compound through the olefinically unsaturated group. The linear structure has pendent groups, 50% of which are carboxy groups, the carboxy groups being neutralized with a sufficient proportion of at least one compound having a cation of a metal selected from alkaline earth metals, chromium, aluminum, iron, cobalt, zinc, nickel or copper to render the polymer soluble in water at 25$C to a concentration of not more than 50 ppm. (8 claims)

  2. Well test analysis for wells producing layered reservoirs with crossflow

    Energy Technology Data Exchange (ETDEWEB)

    Prijambodo, R.; Raghavan, R.; Reynolds, A.C.

    1981-01-01

    The pressure response of a well producing a two-layer reservoir with crossflow is examined. It is shown that the flowing pressure response of a well at early times can be divided into three flow periods. The first period is one in which the reservoir behaves as if it were a stratified system (no-crossflow). This period is followed by a transitional period. During the third period, the reservoir can be described by an equivalent single-layer system. The influence of the skin regions is presented. The significance of the estimate of the skin factor obtained from a pressure test is discussed. It is shown that the nature and magnitude of the skin regions and the size of the reservoir determine the applicability of procedures that are based on single-layer systems. 17 refs.

  3. Health and Wellness Policy Ethics

    Directory of Open Access Journals (Sweden)

    Frank J. Cavico

    2013-01-01

    Full Text Available This perspective is an ethical brief overview and examination of “wellness” policies in the modern workplace using practical examples and a general application of utilitarianism. Many employers are implementing policies that provide incentives to employees who lead a “healthy” lifestyle. The authors address how these policies could adversely affect “non-healthy” employees. There are a wide variety of ethical issues that impact wellness policies and practices in the workplace. The authors conclude that wellness programs can be ethical, while also providing a general reflective analysis of healthcare challenges in order to reflect on the externalities associated with such policies in the workplace.

  4. Health and Wellness Policy Ethics

    Science.gov (United States)

    Cavico, Frank J.; Mujtaba, Bahaudin G.

    2013-01-01

    This perspective is an ethical brief overview and examination of “wellness” policies in the modern workplace using practical examples and a general application of utilitarianism. Many employers are implementing policies that provide incentives to employees who lead a “healthy” lifestyle. The authors address how these policies could adversely affect “non-healthy” employees. There are a wide variety of ethical issues that impact wellness policies and practices in the workplace. The authors conclude that wellness programs can be ethical, while also providing a general reflective analysis of healthcare challenges in order to reflect on the externalities associated with such policies in the workplace. PMID:24596847

  5. Computing Flow through Well Screens Using an Embedded Well Technique

    Science.gov (United States)

    2015-08-01

    the three- dimensional (3D) groundwater (GW) flow simulation using the finite element (FE) method. BACKGROUND: Accurate estimation of flow rates...equations of the coupled GW/well system that include the 3D Richards equation for subsurface flow and a one- dimensional (1D) steady-state equation...fluxes from multi- dimensional finite element flow simulations. ERDC TN-SWWRP-10-4. Vicksburg, MS: U.S. Army Engineer Research and Development Center

  6. Nozzle Bricks and Well Bricks

    Institute of Scientific and Technical Information of China (English)

    Zhang Xiaohui; Peng Xigao

    2011-01-01

    1 Scope This standard specifies the classification,brand,technical requirements,test methods,inspection rules,marking,packing,transportation,storage,and quality certificate of nozzle bricks and well bricks.This standard is applicable to unfired and fired products.

  7. CCSD Well Logging Engineering Program

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    This paper introduces briefly the tasks and characteristics of China Continent Science Drilling (CCSD) Well Logging Engineering, the logging methods measured with CCSD, the quality control of original logging information, the logging plan of CCSD, the logging engineering management of CCSD,the logging interpretation and the results and reports made with CCSD.

  8. DRILL BITS FOR HORIZONTAL WELLS

    Directory of Open Access Journals (Sweden)

    Paolo Macini

    1996-12-01

    Full Text Available This paper underlines the importance of the correct drill bit application in horizontal wells. Afler the analysis of the peculiarities of horizontal wells and drainholes drilling techniques, advantages and disadvantages of the application of both roller cone and fixed cutters drill bits have been discussed. Also, a review of the potential specific featuries useful for a correct drill bit selection in horizontal small diameter holes has been highlighted. Drill bits for these special applications, whose importance is quickly increasing nowadays, should be characterised by a design capable to deliver a good penetration rate low WOB, and, at the same time, be able to withstand high RPM without premature cutting structure failure and undergauge. Formation properties will also determine the cutting structure type and the eventual specific features for additional gauge and shoulder protection.

  9. Implementing an effective wellness program

    Energy Technology Data Exchange (ETDEWEB)

    Dickson, N. [Bruce Power Inc., Toronto, ON (Canada)

    2004-07-01

    Bruce Power is one of the largest nuclear sites in the world, with more than 3,700 employees. The utility strives to be one of Canada's most dynamic and innovative teams. The values of Bruce Power include: safety first; profit through progress; openness; respect and recognition; and professional and personal integrity. With respect to health and safety, Bruce Power strives to have zero medically treated injuries. Details of the healthy workplace committee were presented as well as details of the health and wellness program. Charts of health and mental health screening strategies were presented. Other programs include: an excellent benefits package; flexible working hours; family care days; banked time; an electronic suggestion box; and station condition records. It was noted that there is a strong external focus on health and safety as well. Details of community involvement and sponsorship were presented, along with details of on-site fitness facilities and fitness membership subsidies. Details of the National Quality Institute certification were also provided, including physical environment; lifestyle behaviours; and psycho-social environment. The importance of strong leadership in encouraging feedback, team talk and continuous leadership development was emphasized. Strategies to strengthen leadership include new hiring criteria for managers; management days; first line manager academy; a mentoring program; and task observation and coaching. Communication strategies include articles in weekly newspapers; monthly safety meeting video segments; posters and electronic signs; and voice mail messages from the chief executive officer. Details of the Eat Smart and Weight Challenge certification were provided. The management at human resources faces the challenge of continual change, demographics, and the fact that wellness is difficult to measure. tabs., figs.

  10. Spacecraft Architecture and well being

    Science.gov (United States)

    Ören, Ayşe

    2016-07-01

    As we embark on a journey for new homes in the new worlds to lay solid foundations, we should consider not only the survival of frontiers but also well-being of those to live in zero gravity. As a versatile science, architecture encompasses abstract human needs as well. On our new different direction in the course of the Homo sapiens evolution, we can do this with designs addressing both our needs and senses. Well-being of humans can be achieved by creating environments supporting the cognitive and social stages in the evolution process. Space stations are going through their own evolution process. Any step taken can serve as a reference for further attempts. When studying the history of architecture, window designing is discussed in a later phase, which is the case for building a spaceship as well. We lean on the places we live both physically and metaphorically. The feeling of belonging is essential here, entailing trans-humanism, which is significant since the environment therein is like a dress comfortable enough to fit in, meeting needs without any burden. Utilizing the advent of technology, we can create moods and atmospheres to regulate night and day cycles, thus we can turn claustrophobic places into cozy or dream-like places. Senses provoke a psychological sensation going beyond cultural codes as they are rooted within consciousness, which allows designers to create a mood within a space that tells a story and evokes an emotional impact. Color, amount of light, sound and odor are not superficial. As much as intangible, they are real and powerful tools with a physical presence. Tapping into induction, we can solve a whole system based on a part thereof. Therefore, fractal designs may not yield good results unless used correctly in terms of design although they are functional, which makes geometric arrangement critical.

  11. The Mechanics of Mechanical Watches and Clocks

    CERN Document Server

    Du, Ruxu

    2013-01-01

    "The Mechanics of Mechanical Watches and Clocks" presents historical views and mathematical models of mechanical watches and clocks. Although now over six hundred years old, mechanical watches and clocks are still popular luxury items that fascinate many people around the world. However few have examined the theory of how they work as presented in this book. The illustrations and computer animations are unique and have never been published before. It will be of significant interest to researchers in mechanical engineering, watchmakers and clockmakers, as well as people who have an engineering background and are interested in mechanical watches and clocks. It will also inspire people in other fields of science and technology, such as mechanical engineering and electronics engineering, to advance their designs. Professor Ruxu Du works at the Chinese University of Hong Kong, China. Assistant Professor Longhan Xie works at the South China University of Technology, China.

  12. Characteristic Value Method of Well Test Analysis for Horizontal Gas Well

    Directory of Open Access Journals (Sweden)

    Xiao-Ping Li

    2014-01-01

    Full Text Available This paper presents a study of characteristic value method of well test analysis for horizontal gas well. Owing to the complicated seepage flow mechanism in horizontal gas well and the difficulty in the analysis of transient pressure test data, this paper establishes the mathematical models of well test analysis for horizontal gas well with different inner and outer boundary conditions. On the basis of obtaining the solutions of the mathematical models, several type curves are plotted with Stehfest inversion algorithm. For gas reservoir with closed outer boundary in vertical direction and infinite outer boundary in horizontal direction, while considering the effect of wellbore storage and skin effect, the pseudopressure behavior of the horizontal gas well can manifest four characteristic periods: pure wellbore storage period, early vertical radial flow period, early linear flow period, and late horizontal pseudoradial flow period. For gas reservoir with closed outer boundary both in vertical and horizontal directions, the pseudopressure behavior of the horizontal gas well adds the pseudosteady state flow period which appears after the boundary response. For gas reservoir with closed outer boundary in vertical direction and constant pressure outer boundary in horizontal direction, the pseudopressure behavior of the horizontal gas well adds the steady state flow period which appears after the boundary response. According to the characteristic lines which are manifested by pseudopressure derivative curve of each flow period, formulas are developed to obtain horizontal permeability, vertical permeability, skin factor, reservoir pressure, and pore volume of the gas reservoir, and thus the characteristic value method of well test analysis for horizontal gas well is established. Finally, the example study verifies that the new method is reliable. Characteristic value method of well test analysis for horizontal gas well makes the well test analysis

  13. Why Mathematics Works So Well

    CERN Document Server

    Yanofsky, Noson S

    2015-01-01

    A major question in philosophy of science involves the unreasonable effectiveness of mathematics in physics. Why should mathematics, created or discovered, with nothing empirical in mind be so perfectly suited to describe the laws of the physical universe? We review the well-known fact that the symmetries of the laws of physics are their defining properties. We show that there are similar symmetries of mathematical facts and that these symmetries are the defining properties of mathematics. By examining the symmetries of physics and mathematics, we show that the effectiveness is actually quite reasonable. In essence, we show that the regularities of physics are a subset of the regularities of mathematics.

  14. Excitons in asymmetric quantum wells

    Science.gov (United States)

    Grigoryev, P. S.; Kurdyubov, A. S.; Kuznetsova, M. S.; Ignatiev, I. V.; Efimov, Yu. P.; Eliseev, S. A.; Petrov, V. V.; Lovtcius, V. A.; Shapochkin, P. Yu.

    2016-09-01

    Resonance dielectric response of excitons is studied for the high-quality InGaAs/GaAs heterostructures with wide asymmetric quantum wells (QWs). To highlight effects of the QW asymmetry, we have grown and studied several heterostructures with nominally square QWs as well as with triangle-like QWs. Several quantum confined exciton states are experimentally observed as narrow exciton resonances. A standard approach for the phenomenological analysis of the profiles is generalized by introducing different phase shifts for the light waves reflected from the QWs at different exciton resonances. Good agreement of the phenomenological fit to the experimentally observed exciton spectra for high-quality structures allowed us to reliably obtain parameters of the exciton resonances: the exciton transition energies, the radiative broadenings, and the phase shifts. A direct numerical solution of the Schrödinger equation for the heavy-hole excitons in asymmetric QWs is used for microscopic modeling of the exciton resonances. Remarkable agreement with the experiment is achieved when the effect of indium segregation is taken into account. The segregation results in a modification of the potential profile, in particular, in an asymmetry of the nominally square QWs.

  15. Computer Security: Well fought, FP!

    CERN Multimedia

    Stefan Lueders, Computer Security Team

    2015-01-01

    We are used to spam and phishing emails. But at the end of last year, a very special email struck one of our colleagues in the FP Department.   An accountant was gently asked in an email from “Rolf.Heuer@cern.ch” to prepare a financial transaction - in the strictest confidence. A phone call from the beneficiary to the accountant was made in an attempt to support this request. Despite being instructed not to talk to anyone, the e-mail, the phone conversation and the circumstances were all so suspicious that our colleague consulted his hierarchy, the internal audit service and us. Well done, FP Department! This is a rare case of an attempt at “social engineering”, i.e. luring someone into doing something detrimental to the Organization. The e-mail was fake. While it appeared to come from “Rolf.Heuer@cern.ch”, it actually came from an alleged fraudster outside CERN. The e-mail and the phone call showed that he was well prepared and dire...

  16. Leak Path Development in CO2 Wells

    Science.gov (United States)

    Torsater, M.; Todorovic, J.; Opedal, N.; Lavrov, A.

    2014-12-01

    Wells have in numerous scientific works been denoted the "weak link" of safe and cost-efficient CO2 Capture and Storage (CCS). Whether they are active or abandoned, all wells are man-made intrusions into the storage reservoir with sealing abilities depending on degradable materials like steel and cement. If dense CO2 is allowed to expand (e.g. due to leakage) it will cool down its surroundings and cause strong thermal and mechanical loading on the wellbore. In addition, CO2 reacts chemically with rock, cement and steel. To ensure long-term underground containment, it is therefore necessary to study how, why, where and when leakage occurs along CO2wells. If cement bonding to rock or casing is poor, leak paths can form already during drilling and completion of the well. In the present work, we have mapped the bonding quality of cement-rock and cement-steel interfaces - and measured their resistance towards CO2 flow. This involved a large experimental matrix including different rocks, steels, cement types and well fluids. The bonding qualities were measured on composite cores using micro computed tomography (µ-CT), and CO2 was flooded through the samples to determine leakage rates. These were further compared to numerical simulations of leakage through the digitalized µ-CT core data, and CO2chemical interactions with the materials were mapped using electron microscopy. We also present a new laboratory set-up for measuring how well integrity is affected by downhole temperature variations - and we showcase some initial results. Our work concludes that leak path development in CO2 wells depends critically on the drilling fluids and presflushes/spacers chosen already during drilling and completion of a well. Fluid films residing on rock and casing surfaces strongly degrade the quality of cement bonding. The operation of the well is also important, as even slight thermal cycling (between 10°C and 95°C on casing) leads to significant de-bonding of the annular cement.

  17. Ultra Thin Quantum Well Materials

    Energy Technology Data Exchange (ETDEWEB)

    Dr Saeid Ghamaty

    2012-08-16

    This project has enabled Hi-Z technology Inc. (Hi-Z) to understand how to improve the thermoelectric properties of Si/SiGe Quantum Well Thermoelectric Materials. The research that was completed under this project has enabled Hi-Z Technology, Inc. (Hi-Z) to satisfy the project goal to understand how to improve thermoelectric conversion efficiency and reduce costs by fabricating ultra thin Si/SiGe quantum well (QW) materials and measuring their properties. In addition, Hi-Z gained critical new understanding on how thin film fabrication increases the silicon substrate's electrical conductivity, which is important new knowledge to develop critical material fabrication parameters. QW materials are constructed with alternate layers of an electrical conductor, SiGe and an electrical insulator, Si. Film thicknesses were varied, ranging from 2nm to 10nm where 10 nm was the original film thickness prior to this work. The optimum performance was determined at a Si and SiGe thickness of 4nm for an electrical current and heat flow parallel to the films, which was an important conclusion of this work. Essential new information was obtained on how the Si substrate electrical conductivity increases by up to an order of magnitude upon deposition of QW films. Test measurements and calculations are accurate and include both the quantum well and the substrate. The large increase in substrate electrical conductivity means that a larger portion of the electrical current passes through the substrate. The silicon substrate's increased electrical conductivity is due to inherent impurities and thermal donors which are activated during both molecular beam epitaxy and sputtering deposition of QW materials. Hi-Z's forward looking cost estimations based on future high performance QW modules, in which the best Seebeck coefficient and electrical resistivity are taken from separate samples predict that the electricity cost produced with a QW module could be achieved at <$0.35/W

  18. Well Monitoring System For EGS

    Energy Technology Data Exchange (ETDEWEB)

    Normann, Randy [Perma Works LLC, Pattonville, TX (United States); Glowka, Dave [Perma Works LLC, Pattonville, TX (United States); Normann, Charles [Perma Works LLC, Pattonville, TX (United States); Parker, James [Electrochemical Systems Inc, Knoxville, TN (United States); Caja, Josip [Electrochemical Systems Inc, Knoxville, TN (United States); Dustan, Don [Electrochemical Systems Inc, Knoxville, TN (United States); Caja, Mario [Electrochemical Systems Inc, Knoxville, TN (United States); Sariri, Kouros [Frequency Management Int. Inc., Huntington Beach, CA (United States); Beal, Craig [MajiQ Technologies Inc., Somerville, MA (United States)

    2017-02-26

    This grant is a collection of projects designed to move aircraft high temperature electronics technology into the geothermal industry. Randy Normann is the lead. He licensed the HT83SNL00 chip from Sandia National Labs. This chip enables aircraft developed electronics for work within a geothermal well logging tool. However, additional elements are needed to achieve commercially successful logging tools. These elements are offered by a strong list of industrial partners on this grant as: Electrochemical Systems Inc. for HT Rechargeable Batteries, Frequency Management Systems for 300C digital clock, Sandia National Labs for experts in high temperature solder, Honeywell Solid-State Electronics Center for reprogrammable high temperature memory. During the course of this project MagiQ Technologies for high temperature fiber optics.

  19. Biomedical wellness challenges and opportunities

    Science.gov (United States)

    Tangney, John F.

    2012-06-01

    The mission of ONR's Human and Bioengineered Systems Division is to direct, plan, foster, and encourage Science and Technology in cognitive science, computational neuroscience, bioscience and bio-mimetic technology, social/organizational science, training, human factors, and decision making as related to future Naval needs. This paper highlights current programs that contribute to future biomedical wellness needs in context of humanitarian assistance and disaster relief. ONR supports fundamental research and related technology demonstrations in several related areas, including biometrics and human activity recognition; cognitive sciences; computational neurosciences and bio-robotics; human factors, organizational design and decision research; social, cultural and behavioral modeling; and training, education and human performance. In context of a possible future with automated casualty evacuation, elements of current science and technology programs are illustrated.

  20. Puzzling Mechanisms

    Science.gov (United States)

    van Deventer, M. Oskar

    2009-01-01

    The basis of a good mechanical puzzle is often a puzzling mechanism. This article will introduce some new puzzling mechanisms, like two knots that engage like gears, a chain whose links can be interchanged, and flat gears that do not come apart. It illustrates how puzzling mechanisms can be transformed into real mechanical puzzles, e.g., by…

  1. Linking individual and organizational wellness.

    Science.gov (United States)

    Canosa, J F; Lewandowski, L M

    1993-09-01

    In addition to intervening when workers have substance abuse or stress problems, many hospital employee assistance programs (EAPs) now include a wellness component that emphasizes prevention and organizational wholeness. The EAP at St. Joseph's Hospital & Medical Center, Paterson, NJ, has taken a number of steps to improve its responsiveness to employees' needs and promote constructive organizational changes. To meet increasing requests for mental health services, St. Joseph's EAP implemented a short-term (up to 12 sessions) counseling program that focuses on problem-solving techniques. The EAP has also used feedback from clients to address organizational issues. For example, a survey that revealed differences between managers' and employees' perceptions of managers' leadership skills has led St. Joseph's to consider development of further workshops to train managers on how to be more effective leaders. And in response to complaints from nurses about a lack of communication with physicians, St. Joseph's invested $8,000 to implement nursing support groups and seminars to enhance nurse-physician collaboration. Additional EAP activities include consulting services for other corporations and help for employees in overcoming financial barriers to access to healthcare and social services. As budgets tighten, effective marketing of EAPs will be essential to their continued growth. In particular, EAP administrators must learn how to document the strategic and financial benefits of their programs.

  2. 绥中36-1油田油管腐蚀产物及土酸酸蚀特征研究%A Study of the Corrosion Product and Its Mechanism of Suizhong 36-1 Oilfield Well Tubes

    Institute of Scientific and Technical Information of China (English)

    唐洪明; 黎菁; 赵峰; 张旭阳; 张健; 向问陶; 周薇

    2011-01-01

    用扫描电镜、能谱分析和X-射线衍射仪等测试方法,对比分析了绥中36-1油田典型井J13井油管土酸处理前后的腐蚀结垢产物.结果表明,土酸处理前的腐蚀结垢产物主要元素为Fe、O、S、C,次要元素为Ca、Mg、Si,X-射线衍射分析矿物为黄铁矿、含镁方解石、菱铁矿,电镜下观察腐蚀产物中广泛存在着海绵状及珊瑚状硫化物.土酸常温浸泡腐蚀产物2 h后,酸蚀率为13.1%,垢样表层基本不舍Ca、Mg等元素,富含Fe、O、S等元素,其矿物成分为Fe(OH)3、Fe2O3、FeS等,晶形完好的莓状氧化铁及氢氧化铁小球经酸化后被部分溶蚀,酸处理后的残余物主要为非晶质或隐晶质.腐蚀机理为:SRB将硫酸根离子作为有机物代谢产物的最终电子受体,少量的被还原成硫,大部分以硫化氢(H2S)形式放出,在其代谢过程中对油井油管造成腐蚀.%The corrosion product of J13 well tubes was analyzed by XRD, EDS and ESEM.The main elements of the scale before mud acid treatment were Fe、O、S、C, and semi-elements were Ca、Mg、Si.The results of X-ray diffraction showed that the main contents of mineral were pyrite, magnesium calcite and siderite.SEM test showed that sulfide shapes like cavernous or coralliform widely existed in the corrosion products.The etching rate was of 13.1% after 2hrs acid treatment.The surface of acidification products didn' t contain Ca、Mg, but were rich of Fe、O、S, which should be Fe( OH)3、Fe2O3 、FeS.The globule of well crystalline iron oxide and ferric hydroxide were partly dissolved during acidification, thus the residue were mainly amorphous or cryptocrystalline.The mechanism of corrosion was that SRB were anaerobic bacteria which took sulfate ions as the final electron acceptor of organic metabolites, transferred a small amount of them to sulfur, and released most of them in form of hydrogen sulfide (H2S).In the course of metabolism, SRB caused the corrosion of oilfield well

  3. How well can centenarians hear?

    Science.gov (United States)

    Mao, Zhongping; Zhao, Lijun; Pu, Lichun; Wang, Mingxiao; Zhang, Qian; He, David Z Z

    2013-01-01

    With advancements in modern medicine and significant improvements in life conditions in the past four decades, the elderly population is rapidly expanding. There is a growing number of those aged 100 years and older. While many changes in the human body occur with physiological aging, as many as 35% to 50% of the population aged 65 to 75 years have presbycusis. Presbycusis is a progressive sensorineural hearing loss that occurs as people get older. There are many studies of the prevalence of age-related hearing loss in the United States, Europe, and Asia. However, no audiological assessment of the population aged 100 years and older has been done. Therefore, it is not clear how well centenarians can hear. We measured middle ear impedance, pure-tone behavioral thresholds, and distortion-product otoacoustic emission from 74 centenarians living in the city of Shaoxing, China, to evaluate their middle and inner ear functions. We show that most centenarian listeners had an "As" type tympanogram, suggesting reduced static compliance of the tympanic membrane. Hearing threshold tests using pure-tone audiometry show that all centenarian subjects had varying degrees of hearing loss. More than 90% suffered from moderate to severe (41 to 80 dB) hearing loss below 2,000 Hz, and profound (>81 dB) hearing loss at 4,000 and 8,000 Hz. Otoacoustic emission, which is generated by the active process of cochlear outer hair cells, was undetectable in the majority of listeners. Our study shows the extent and severity of hearing loss in the centenarian population and represents the first audiological assessment of their middle and inner ear functions.

  4. How well can centenarians hear?

    Directory of Open Access Journals (Sweden)

    Zhongping Mao

    Full Text Available With advancements in modern medicine and significant improvements in life conditions in the past four decades, the elderly population is rapidly expanding. There is a growing number of those aged 100 years and older. While many changes in the human body occur with physiological aging, as many as 35% to 50% of the population aged 65 to 75 years have presbycusis. Presbycusis is a progressive sensorineural hearing loss that occurs as people get older. There are many studies of the prevalence of age-related hearing loss in the United States, Europe, and Asia. However, no audiological assessment of the population aged 100 years and older has been done. Therefore, it is not clear how well centenarians can hear. We measured middle ear impedance, pure-tone behavioral thresholds, and distortion-product otoacoustic emission from 74 centenarians living in the city of Shaoxing, China, to evaluate their middle and inner ear functions. We show that most centenarian listeners had an "As" type tympanogram, suggesting reduced static compliance of the tympanic membrane. Hearing threshold tests using pure-tone audiometry show that all centenarian subjects had varying degrees of hearing loss. More than 90% suffered from moderate to severe (41 to 80 dB hearing loss below 2,000 Hz, and profound (>81 dB hearing loss at 4,000 and 8,000 Hz. Otoacoustic emission, which is generated by the active process of cochlear outer hair cells, was undetectable in the majority of listeners. Our study shows the extent and severity of hearing loss in the centenarian population and represents the first audiological assessment of their middle and inner ear functions.

  5. Sectoral Market Mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    This paper first reviews proposals for the design of sectoral and related market mechanisms currently debated, both in the UNFCCC negotiations, and in different domestic legislative contexts. Secondly, it addresses the possible principles and technical requirements that Parties may wish to consider as the foundations for further elaboration of the mechanisms. The third issue explored herein is domestic implementation of sectoral market mechanisms by host countries, incentives to move to new market mechanisms, as well as how the transition between current and future mechanisms could be managed.

  6. Testing geopressured geothermal reservoirs in existing wells. Wells of Opportunity Program final contract report, 1980-1981

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    The geopressured-geothermal candidates for the Wells of Opportunity program were located by the screening of published information on oil industry activity and through direct contact with the oil and gas operators. This process resulted in the recommendation to the DOE of 33 candidate wells for the program. Seven of the 33 recommended wells were accepted for testing. Of these seven wells, six were actually tested. The first well, the No. 1 Kennedy, was acquired but not tested. The seventh well, the No. 1 Godchaux, was abandoned due to mechanical problems during re-entry. The well search activities, which culminated in the acceptance by the DOE of 7 recommended wells, were substantial. A total of 90,270 well reports were reviewed, leading to 1990 wells selected for thorough geological analysis. All of the reservoirs tested in this program have been restricted by one or more faults or permeability barriers. A comprehensive discussion of test results is presented.

  7. Cell mechanics: a dialogue

    Science.gov (United States)

    Tao, Jiaxiang; Li, Yizeng; Vig, Dhruv K.; Sun, Sean X.

    2017-03-01

    Under the microscope, eukaryotic animal cells can adopt a variety of different shapes and sizes. These cells also move and deform, and the physical mechanisms driving these movements and shape changes are important in fundamental cell biology, tissue mechanics, as well as disease biology. This article reviews some of the basic mechanical concepts in cells, emphasizing continuum mechanics description of cytoskeletal networks and hydrodynamic flows across the cell membrane. We discuss how cells can generate movement and shape changes by controlling mass fluxes at the cell boundary. These mass fluxes can come from polymerization/depolymerization of actin cytoskeleton, as well as osmotic and hydraulic pressure-driven flow of water across the cell membrane. By combining hydraulic pressure control with force balance conditions at the cell surface, we discuss a quantitative mechanism of cell shape and volume control. The broad consequences of this model on cell mechanosensation and tissue mechanics are outlined.

  8. Coherent excitonic nonlinearity versus inhomogeneous broadening in single quantum wells

    DEFF Research Database (Denmark)

    Langbein, Wolfgang Werner; Borri, Paola; Hvam, Jørn Märcher;

    1998-01-01

    The coherent response of excitons in semiconductor nanostructures, as measured in four wave mixing (FWM) experiments, depends strongly on the inhomogeneous broadening of the exciton transition. We investigate GaAs-AlGaAs single quantum wells (SQW) of 4 nm to 25 nm well width. Two main mechanisms...

  9. Continuum mechanics

    CERN Document Server

    Spencer, A J M

    2004-01-01

    The mechanics of fluids and the mechanics of solids represent the two major areas of physics and applied mathematics that meet in continuum mechanics, a field that forms the foundation of civil and mechanical engineering. This unified approach to the teaching of fluid and solid mechanics focuses on the general mechanical principles that apply to all materials. Students who have familiarized themselves with the basic principles can go on to specialize in any of the different branches of continuum mechanics. This text opens with introductory chapters on matrix algebra, vectors and Cartesian ten

  10. Physics of strained quantum well lasers

    CERN Document Server

    Loehr, John P

    1998-01-01

    When this publisher offered me the opportunity to \\\\Tite a book, some six years ago, I did not hesitate to say yes. I had just spent the last four years of graduate school struggling to understand the physics of strained quantum well lasers, and it seemed to me the whole experience was much more difficult that it should have been. For although many of the results I needed were easy to locate, the underlying physical premises and intervening steps were not. If only I had a book providing the derivations, I could have absorbed them and gone on my way. Such a book lies before you. It provides a unified and self-contained descrip­ tion of the essential physics of strained quantum well lasers, starting from first principles whenever feasible. The presentation I have chosen requires only the standard introductory background in quantum mechanics, solid state physics, and electromagnetics expected of entering graduate students in physics or elec­ trical engineering. A single undergraduate course in each of these su...

  11. Mechanical Systems, Classical Models

    CERN Document Server

    Teodorescu, Petre P

    2009-01-01

    This third volume completes the Work Mechanical Systems, Classical Models. The first two volumes dealt with particle dynamics and with discrete and continuous mechanical systems. The present volume studies analytical mechanics. Topics like Lagrangian and Hamiltonian mechanics, the Hamilton-Jacobi method, and a study of systems with separate variables are thoroughly discussed. Also included are variational principles and canonical transformations, integral invariants and exterior differential calculus, and particular attention is given to non-holonomic mechanical systems. The author explains in detail all important aspects of the science of mechanics, regarded as a natural science, and shows how they are useful in understanding important natural phenomena and solving problems of interest in applied and engineering sciences. Professor Teodorescu has spent more than fifty years as a Professor of Mechanics at the University of Bucharest and this book relies on the extensive literature on the subject as well as th...

  12. Mechanical Systems, Classical Models

    CERN Document Server

    Teodorescu, Petre P

    2007-01-01

    All phenomena in nature are characterized by motion; this is an essential property of matter, having infinitely many aspects. Motion can be mechanical, physical, chemical or biological, leading to various sciences of nature, mechanics being one of them. Mechanics deals with the objective laws of mechanical motion of bodies, the simplest form of motion. In the study of a science of nature mathematics plays an important role. Mechanics is the first science of nature which was expressed in terms of mathematics by considering various mathematical models, associated to phenomena of the surrounding nature. Thus, its development was influenced by the use of a strong mathematical tool; on the other hand, we must observe that mechanics also influenced the introduction and the development of many mathematical notions. In this respect, the guideline of the present book is precisely the mathematical model of mechanics. A special accent is put on the solving methodology as well as on the mathematical tools used; vectors, ...

  13. Mechanical Property of Foamed Metal

    Institute of Scientific and Technical Information of China (English)

    LIU Pei-sheng; SANG Hai-bo

    2004-01-01

    A comprehensive study on the mechanical behavior of foamed metals was demonstrated. The relationship among their mechanical properties, preparation method, porosity and the structure was briefly studied as well.

  14. Well log characterization of natural gas hydrates

    Science.gov (United States)

    Collett, Timothy S.; Lee, Myung W.

    2011-01-01

    In the last 25 years we have seen significant advancements in the use of downhole well logging tools to acquire detailed information on the occurrence of gas hydrate in nature: From an early start of using wireline electrical resistivity and acoustic logs to identify gas hydrate occurrences in wells drilled in Arctic permafrost environments to today where wireline and advanced logging-while-drilling tools are routinely used to examine the petrophysical nature of gas hydrate reservoirs and the distribution and concentration of gas hydrates within various complex reservoir systems. The most established and well known use of downhole log data in gas hydrate research is the use of electrical resistivity and acoustic velocity data (both compressional- and shear-wave data) to make estimates of gas hydrate content (i.e., reservoir saturations) in various sediment types and geologic settings. New downhole logging tools designed to make directionally oriented acoustic and propagation resistivity log measurements have provided the data needed to analyze the acoustic and electrical anisotropic properties of both highly inter-bedded and fracture dominated gas hydrate reservoirs. Advancements in nuclear-magnetic-resonance (NMR) logging and wireline formation testing have also allowed for the characterization of gas hydrate at the pore scale. Integrated NMR and formation testing studies from northern Canada and Alaska have yielded valuable insight into how gas hydrates are physically distributed in sediments and the occurrence and nature of pore fluids (i.e., free-water along with clay and capillary bound water) in gas-hydrate-bearing reservoirs. Information on the distribution of gas hydrate at the pore scale has provided invaluable insight on the mechanisms controlling the formation and occurrence of gas hydrate in nature along with data on gas hydrate reservoir properties (i.e., permeabilities) needed to accurately predict gas production rates for various gas hydrate

  15. Engineering quantum mechanics

    CERN Document Server

    Ahn, Doyeol

    2011-01-01

    A clear introduction to quantum mechanics concepts Quantum mechanics has become an essential tool for modern engineering, particularly due to the recent developments in quantum computing as well as the rapid progress in optoelectronic devices. Engineering Quantum Mechanics explains the fundamentals of this exciting field, providing broad coverage of both traditional areas such as semiconductor and laser physics as well as relatively new yet fast-growing areas such as quantum computation and quantum information technology. The book begins with basic quantum mechanics, reviewing measurements and probability, Dirac formulation, the uncertainty principle, harmonic oscillator, angular momentum eigenstates, and perturbation theory. Then, quantum statistical mechanics is explored, from second quantization and density operators to coherent and squeezed states, coherent interactions between atoms and fields, and the Jaynes-Cummings model. From there, the book moves into elementary and modern applications, discussing s...

  16. Mechanical design

    CERN Document Server

    Risitano, Antonino

    2011-01-01

    METHODOLOGICAL STATEMENT OF ENGINEERING DESIGNApproaches to product design and developmentMechanical design and environmental requirementsPROPERTIES OF ENGINEERING MATERIALSMaterials for mechanical designCharacterization of metalsStress conditionsFatigue of materialsOptimum material selection in mechanical designDESIGN OF MECHANICAL COMPONENTS AND SYSTEMSFailure theoriesHertz theoryLubrificationShafts and bearingsSplines and keysSpringsFlexible machine elementsSpur gearsPress and shrink fitsPressure tubesCouplingsClutchesBrakes

  17. Mechanical Kinesiology.

    Science.gov (United States)

    Barham, Jerry N.

    Mechanical kinesiology is defined as a study of the mechanical factors affecting human movement, i.e., applying the physical laws of mechanics to the study of human motor behavior. This textbook on the subject is divided into thirty lessons. Each lesson is organized into three parts: a part on the text proper; a part entitled "study…

  18. Mechanisms Design

    DEFF Research Database (Denmark)

    Restrepo-Giraldo, John Dairo

    2006-01-01

    Most products and machines involve some kind of controlled movement. From window casements to DVD players, from harbor cranes to the shears to prune your garden, all these machines require mechanisms to move. This course intends to provide the analytical and conceptual tools to design such mechan......Most products and machines involve some kind of controlled movement. From window casements to DVD players, from harbor cranes to the shears to prune your garden, all these machines require mechanisms to move. This course intends to provide the analytical and conceptual tools to design...... using criteria such as size, performance parameters, operation environment, etc. Content: Understanding Mechanisms Design (2 weeks) Definitions, mechanisms representations, kinematic diagrams, the four bar linkage, mobility, applications of mechanisms, types of mechanisms, special mechanisms, the design......: equations for various mechanisms. At the end of this module you will be able to analyze existing mechanisms and to describe their movement. Designing mechanisms (7 weeks) Type synthesis and dimensional synthesis, function generation, path generation, three precision points in multi-loop mechanisms...

  19. Production Well Performance Enhancement using Sonication Technology

    Energy Technology Data Exchange (ETDEWEB)

    Adewumi, Michael A; Ityokumbul, M Thaddeus; Watson, Robert W; Eltohami, Eltohami; Farias, Mario; Heckman, Glenn; Houlihan, Brendan; Karoor, Samata Prakash; Miller, Bruce G; Mohammed, Nazia; Olanrewaju, Johnson; Ozdemir, Mine; Rejepov, Dautmamed; Sadegh, Abdallah A; Quammie, Kevin E; Zaghloul, Jose; Hughes, W Jack; Montgomery, Thomas C

    2005-12-31

    The objective of this project was to develop a sonic well performance enhancement technology that focused on near wellbore formation damage. In order to successfully achieve this objective, a three-year project was defined. The entire project was broken into four tasks. The overall objective of all this was to foster a better understanding of the mechanisms involved in sonic energy interactions with fluid flow in porous media and adapt such knowledge for field applications. The fours tasks are: • Laboratory studies • Mathematical modeling • Sonic tool design and development • Field demonstration The project was designed to be completed in three years; however, due to budget cuts, support was only provided for the first year, and hence the full objective of the project could not be accomplished. This report summarizes what was accomplished with the support provided by the US Department of Energy. Experiments performed focused on determining the inception of cavitation, studying thermal dissipation under cavitation conditions, investigating sonic energy interactions with glass beads and oil, and studying the effects of sonication on crude oil properties. Our findings show that the voltage threshold for onset of cavitation is independent of transducer-hydrophone separation distance. In addition, thermal dissipation under cavitation conditions contributed to the mobilization of deposited paraffins and waxes. Our preliminary laboratory experiments suggest that waxes are mobilized when the fluid temperature approaches 40°C. Experiments were conducted that provided insights into the interactions between sonic wave and the fluid contained in the porous media. Most of these studies were carried out in a slim-tube apparatus. A numerical model was developed for simulating the effect of sonication in the nearwellbore region. The numerical model developed was validated using a number of standard testbed problems. However, actual application of the model for scale

  20. Discrete mechanics

    CERN Document Server

    Caltagirone, Jean-Paul

    2014-01-01

    This book presents the fundamental principles of mechanics to re-establish the equations of Discrete Mechanics. It introduces physics and thermodynamics associated to the physical modeling.  The development and the complementarity of sciences lead to review today the old concepts that were the basis for the development of continuum mechanics. The differential geometry is used to review the conservation laws of mechanics. For instance, this formalism requires a different location of vector and scalar quantities in space. The equations of Discrete Mechanics form a system of equations where the H

  1. An exactly soluble model of a shallow double well

    Energy Technology Data Exchange (ETDEWEB)

    Muñoz-Vega, R., E-mail: rodrigo.munoz@uacm.edu.mx [Universidad Autónoma de la Ciudad de México, Centro Histórico, Fray Servando Teresa de Mier 92, Col. Centro, Del. Cuauhtémoc, México DF, CP 06080 (Mexico); López-Chávez, E., E-mail: elopezc@hotmail.com [Universidad Autónoma de la Ciudad de México, Centro Histórico, Fray Servando Teresa de Mier 92, Col. Centro, Del. Cuauhtémoc, México DF, CP 06080 (Mexico); Salinas-Hernández, E., E-mail: esalinas@ipn.mx [ESCOM-IPN, Av Juan de Dios Bátiz s/n, Unidad Profesional Adolfo López Mateos, Col Lindavista, Del G A Madero, México DF, CP 07738 (Mexico); Flores-Godoy, J.-J., E-mail: job.flores@ibero.mx [Departamento de Física y Matemáticas, Universidad Iberoamericana, Prol. Paseo de la Reforma 880, Col Lomas de Santa Fe, Del A Obregón, México DF, CP 01219 (Mexico); Fernández-Anaya, G., E-mail: guillermo.fernandez@ibero.com [Departamento de Física y Matemáticas, Universidad Iberoamericana, Prol. Paseo de la Reforma 880, Col Lomas de Santa Fe, Del A Obregón, México DF, CP 01219 (Mexico)

    2014-06-13

    Shallow one-dimensional double-well potentials appear in atomic and molecular physics and other fields. Unlike the “deep” wells of macroscopic quantum coherent systems, shallow double wells need not present low-lying two-level systems. We argue that this feature, the absence of a low-lying two-level system in certain shallow double wells, may allow the finding of new test grounds for quantum mechanics in mesoscopic systems. We illustrate the above ideas with a family of shallow double wells obtained from reflectionless potentials through the Darboux–Bäcklund transform. - Highlights: • We present double wells not conforming to the low-lying two-state system model. • Models similar to ours appear in atomic and molecular physics. • Here there is no classically prohibited region between wells. • The ground probability is peaked at the position of classical unstable equilibrium in this models.

  2. Nonholonomic mechanics and control

    CERN Document Server

    Murray, RM

    2015-01-01

    This book explores some of the connections between control theory and geometric mechanics; that is, control theory is linked with a geometric view of classical mechanics in both its Lagrangian and Hamiltonian formulations and in particular with the theory of mechanical systems subject to motion constraints. The synthesis of the topic is appropriate as there is a particularly rich connection between mechanics and nonlinear control theory. The book provides a unified treatment of nonlinear control theory and constrained mechanical systems and illustrates the elegant mathematics behind many simple, interesting, and useful mechanical examples. It is intended for graduate students who wish to learn this subject and researchers in the area who want to enhance their techniques. The book contains sections focusing on physical examples and elementary terms, as well as theoretical sections that use sophisticated analysis and geometry. The first four chapters offer preliminaries and background information, while the...

  3. Multistability in planar liquid crystal wells

    KAUST Repository

    Luo, Chong

    2012-06-08

    A planar bistable liquid crystal device, reported in Tsakonas, is modeled within the Landau-de Gennes theory for nematic liquid crystals. This planar device consists of an array of square micrometer-sized wells. We obtain six different classes of equilibrium profiles and these profiles are classified as diagonal or rotated solutions. In the strong anchoring case, we propose a Dirichlet boundary condition that mimics the experimentally imposed tangent boundary conditions. In the weak anchoring case, we present a suitable surface energy and study the multiplicity of solutions as a function of the anchoring strength. We find that diagonal solutions exist for all values of the anchoring strength W≥0, while rotated solutions only exist for W≥W c>0, where W c is a critical anchoring strength that has been computed numerically. We propose a dynamic model for the switching mechanisms based on only dielectric effects. For sufficiently strong external electric fields, we numerically demonstrate diagonal-to-rotated and rotated-to-diagonal switching by allowing for variable anchoring strength across the domain boundary. © 2012 American Physical Society.

  4. Mechanical Design

    Energy Technology Data Exchange (ETDEWEB)

    Shook, Richard; /Marquette U. /SLAC

    2010-08-25

    The particle beam of the SXR (soft x-ray) beam line in the LCLS (Linac Coherent Light Source) has a high intensity in order to penetrate through samples at the atomic level. However, the intensity is so high that many experiments fail because of severe damage. To correct this issue, attenuators are put into the beam line to reduce this intensity to a level suitable for experimentation. Attenuation is defined as 'the gradual loss in intensity of any flux through a medium' by [1]. It is found that Beryllium and Boron Carbide can survive the intensity of the beam. At very thin films, both of these materials work very well as filters for reducing the beam intensity. Using a total of 12 filters, the first 9 being made of Beryllium and the rest made of Boron Carbide, the beam's energy range of photons can be attenuated between 800 eV and 9000 eV. The design of the filters allows attenuation for different beam intensities so that experiments can obtain different intensities from the beam if desired. The step of attenuation varies, but is relative to the thickness of the filter as a power function of 2. A relationship for this is f(n) = x{sub 0}2{sup n} where n is the step of attenuation desired and x{sub 0} is the initial thickness of the material. To allow for this desired variation, a mechanism must be designed within the test chamber. This is visualized using a 3D computer aided design modeling tool known as Solid Edge.

  5. Spatially indirect excitons in coupled quantum wells

    Energy Technology Data Exchange (ETDEWEB)

    Lai, Chih-Wei Eddy [Univ. of California, Berkeley, CA (United States)

    2004-03-01

    Microscopic quantum phenomena such as interference or phase coherence between different quantum states are rarely manifest in macroscopic systems due to a lack of significant correlation between different states. An exciton system is one candidate for observation of possible quantum collective effects. In the dilute limit, excitons in semiconductors behave as bosons and are expected to undergo Bose-Einstein condensation (BEC) at a temperature several orders of magnitude higher than for atomic BEC because of their light mass. Furthermore, well-developed modern semiconductor technologies offer flexible manipulations of an exciton system. Realization of BEC in solid-state systems can thus provide new opportunities for macroscopic quantum coherence research. In semiconductor coupled quantum wells (CQW) under across-well static electric field, excitons exist as separately confined electron-hole pairs. These spatially indirect excitons exhibit a radiative recombination time much longer than their thermal relaxation time a unique feature in direct band gap semiconductor based structures. Their mutual repulsive dipole interaction further stabilizes the exciton system at low temperature and screens in-plane disorder more effectively. All these features make indirect excitons in CQW a promising system to search for quantum collective effects. Properties of indirect excitons in CQW have been analyzed and investigated extensively. The experimental results based on time-integrated or time-resolved spatially-resolved photoluminescence (PL) spectroscopy and imaging are reported in two categories. (i) Generic indirect exciton systems: general properties of indirect excitons such as the dependence of exciton energy and lifetime on electric fields and densities were examined. (ii) Quasi-two-dimensional confined exciton systems: highly statistically degenerate exciton systems containing more than tens of thousands of excitons within areas as small as (10 micrometer)2 were

  6. Wind Energy Guide.

    Science.gov (United States)

    Harrison, David

    The booklet, intended for students and other visitors to the Lathrop E. Smith Environmental Education Center (Rockville, Maryland), explains how windmills work and their economic and environmental advantages. The history of windmills in Europe and Asia is briefly described, as well as the history of windmills and wind generators (for electricity)…

  7. Advanced concepts in quantum mechanics

    CERN Document Server

    Esposito, Giampiero; Miele, Gennaro; Sudarshan, George

    2015-01-01

    Introducing a geometric view of fundamental physics, starting from quantum mechanics and its experimental foundations, this book is ideal for advanced undergraduate and graduate students in quantum mechanics and mathematical physics. Focusing on structural issues and geometric ideas, this book guides readers from the concepts of classical mechanics to those of quantum mechanics. The book features an original presentation of classical mechanics, with the choice of topics motivated by the subsequent development of quantum mechanics, especially wave equations, Poisson brackets and harmonic oscillators. It also presents new treatments of waves and particles and the symmetries in quantum mechanics, as well as extensive coverage of the experimental foundations.

  8. Polymer-cement geothermal-well-completion materials. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Zeldin, A.N.; Kukacka, L.E.

    1980-07-01

    A program to develop high-temperature polymer cements was performed. Several formulations based on organic and semi-inorganic binders were evaluated on the basis of mechanical and thermal stability, and thickening time. Two optimized systems exhibited properties exceeding those required for use in geothermal wells. Both systems were selected for continued evaluation at the National Bureau of Standards and contingent upon the results, for field testing in geothermal wells.

  9. Discrete Quantum Mechanics

    OpenAIRE

    Odake, Satoru; Sasaki, Ryu

    2011-01-01

    A comprehensive review of the discrete quantum mechanics with the pure imaginary shifts and the real shifts is presented in parallel with the corresponding results in the ordinary quantum mechanics. The main subjects to be covered are the factorised Hamiltonians, the general structure of the solution spaces of the Schroedinger equation (Crum's theorem and its modification), the shape invariance, the exact solvability in the Schroedinger picture as well as in the Heisenberg picture, the creati...

  10. Elementary Nonrelativistic Quantum Mechanics

    CERN Document Server

    Rosu, H C

    2000-01-01

    This is a graduate course on elementary quantum mechanics written for the benefit of undergraduate and graduate students. It is the English version of physics/0003106, which I did at the suggestion of several students from different countries. The topics included refer to the postulates of quantum mechanics, one-dimensional barriers and wells, angular momentum and spin, WKB method, harmonic oscillator, hydrogen atom, quantum scattering, and partial waves

  11. Mechanical Service; Service Mechanique

    Energy Technology Data Exchange (ETDEWEB)

    Alliaume, T.; Benoit, A.; Bonin, H.; Ducimetiere, D.; Essertaize, D.; Gelin, G.; Guillot, G.; Lemoine, C.; Mabo, J.C.; Mounier, F.; Tissot, S.; Verdier, G. [Inst. de Physique Nucleaire, Lyon-1 Univ., 69 - Villeurbanne (France)

    1998-12-31

    The service studies the mechanical part of the experiment or detectors used by the physics groups in collaboration with the physicists, engineers and the technicians of the experiment assistance group as well as with other technical groups. The mechanical service was implied in the following projects: CMS, VIRGO (the IGISOL ion guide chamber), PIAFE, NA50 (reaction chamber, metallic cluster source), ORION, SICANE, EDELWEISS II 2 figs.

  12. Fracture Mechanics

    CERN Document Server

    Zehnder, Alan T

    2012-01-01

    Fracture mechanics is a vast and growing field. This book develops the basic elements needed for both fracture research and engineering practice. The emphasis is on continuum mechanics models for energy flows and crack-tip stress- and deformation fields in elastic and elastic-plastic materials. In addition to a brief discussion of computational fracture methods, the text includes practical sections on fracture criteria, fracture toughness testing, and methods for measuring stress intensity factors and energy release rates. Class-tested at Cornell, this book is designed for students, researchers and practitioners interested in understanding and contributing to a diverse and vital field of knowledge. Alan Zehnder joined the faculty at Cornell University in 1988. Since then he has served in a number of leadership roles including Chair of the Department of Theoretical and Applied Mechanics, and Director of the Sibley School of Mechanical and Aerospace Engineering.  He teaches applied mechanics and his research t...

  13. College mechanics

    CERN Document Server

    Şengül, Caner

    2016-01-01

    College Mechanics QueBank has been designed to be different, enthusiastic, interesting and helpful to you. Therefore, it is not just a test bank about mechanics but also it is like a compass in order to find your way in mechanics Each chapter in this book is put in an order to follow a hierarchy of the mechanics topics; from vectors to simple harmonic motion. Throughout the book there are many multiple choice and long answer questions for you to solve. They have been created for YGS, LYS, SAT, IB or other standardized exams in the world because mechanics has no boundaries and so Physics has no country. Learn the main principle of each chapter and explore the daily life applications. Then you can start to solve the questions by planning a problem solving method carefully. Finally, enjoy solving the questions and discover the meachanics of the universe once more.

  14. Quantum mechanics

    CERN Document Server

    Rae, Alastair I M

    2016-01-01

    A Thorough Update of One of the Most Highly Regarded Textbooks on Quantum Mechanics Continuing to offer an exceptionally clear, up-to-date treatment of the subject, Quantum Mechanics, Sixth Edition explains the concepts of quantum mechanics for undergraduate students in physics and related disciplines and provides the foundation necessary for other specialized courses. This sixth edition builds on its highly praised predecessors to make the text even more accessible to a wider audience. It is now divided into five parts that separately cover broad topics suitable for any general course on quantum mechanics. New to the Sixth Edition * Three chapters that review prerequisite physics and mathematics, laying out the notation, formalism, and physical basis necessary for the rest of the book * Short descriptions of numerous applications relevant to the physics discussed, giving students a brief look at what quantum mechanics has made possible industrially and scientifically * Additional end-of-chapter problems with...

  15. Quantum well intermixing for photonic integrated circuits

    Science.gov (United States)

    Sun, Xiaolan

    2007-12-01

    In this thesis, several aspects of GaAsSb/AlSb multiple quantum well (MQW) heterostructures have been studied. First, it was shown that the GaAsSb MQWs with a direct band gap near 1.5 mum at room temperature could be monolithically integrated with AlGaSb/AlSb or AlGaAsSb/AlAsSb Bragg mirrors, which can be applied to Vertical Cavity Surface Emitting Lasers (VCSELs). Secondly, an enhanced photoluminescence from GaAsSb MQWs was reported. The photoluminescence strength increased dramatically with arsenic fraction as conjectured. The peak photoluminescence from GaAs0.31Sb 0.69 was 208 times larger than that from GaSb. Thirdly, the strong photoluminescence from GaAsSb MQWs and the direct nature of the band gap near 1.5 mum at room temperature make the material favorable for intermixing studies. The samples were treated with ion implantation followed by rapid thermal annealing (RTA). A band gap blueshift as large as 198 nm was achieved with a modest ion dose and moderate annealing temperature. Photoluminescence strength for implanted samples generally increased with the annealing temperature. The energy blueshift was attributed to the interdiffusion of both the group III and group V sublattices. Finally, based on the interesting properties of GaAsSb MQWs, including the direct band gap near 1.5 mum, strong photoluminescence, a wide range of wavelength (1300--1500 nm) due to ion implantation-induced quantum well intermixing (QWI), and subpicosecond spin relaxation reported by Hall et al, we proposed to explore the possibilities for ultra-fast optical switching by investigating spin dynamics in semiconductor optical amplifiers (SOAs) containing InGaAs and GaSb MQWs. For circularly polarized pump and probe waves, the numerical simulation on the modal indices showed that the difference between the effective refractive index of the TE and TM modes was quite large, on the order of 0.03, resulting in a significant phase mismatch in a traveling length larger than 28 mum. Thus the

  16. Agency, Values, and Well-Being: A Human Development Model

    Science.gov (United States)

    Welzel, Christian; Inglehart, Ronald

    2010-01-01

    This paper argues that feelings of agency are linked to human well-being through a sequence of adaptive mechanisms that promote human development, once existential conditions become permissive. In the first part, we elaborate on the evolutionary logic of this model and outline why an evolutionary perspective is helpful to understand changes in…

  17. Minimal length uncertainty relation and gravitational quantum well

    NARCIS (Netherlands)

    Brau, F.; Buisseret, F.

    2006-01-01

    The dynamics of a particle in a gravitational quantum well is studied in the context of nonrelativistic quantum mechanics with a particular deformation of a two-dimensional Heisenberg algebra. This deformation yields a new short-distance structure characterized by a finite minimal uncertainty in pos

  18. Quantum mechanics for pedestrians

    CERN Document Server

    Pade, Jochen

    2014-01-01

    This book provides an introduction into the fundamentals of non-relativistic quantum mechanics. In Part 1, the essential principles are developed. Applications and extensions of the formalism can be found in Part 2. The book includes not only material that is presented in traditional textbooks on quantum mechanics, but also discusses in detail current issues such as interaction-free quantum measurements, neutrino oscillations, various topics in the field of quantum information as well as fundamental problems and epistemological questions, such as the measurement problem, entanglement, Bell's inequality, decoherence, and the realism debate. A chapter on current interpretations of quantum mechanics concludes the book. To develop quickly and clearly the main principles of quantum mechanics and its mathematical formulation, there is a systematic change between wave mechanics and algebraic representation in the first chapters. The required mathematical tools are introduced step by step. Moreover, the appendix coll...

  19. 77 FR 25587 - Anchorage Regulations; Wells, ME

    Science.gov (United States)

    2012-05-01

    ... SECURITY Coast Guard 33 CFR Part 110 RIN 1625-AA01 Anchorage Regulations; Wells, ME AGENCY: Coast Guard... three special anchorage areas in Wells Harbor, Wells, Maine, through a published final rule. The Marine.... Viewing Comments and Documents To view comments, as well as documents mentioned in this preamble as...

  20. 76 FR 52599 - Anchorage Regulations; Wells, ME

    Science.gov (United States)

    2011-08-23

    ... SECURITY Coast Guard 33 CFR Part 110 RIN 1625-AA01 Anchorage Regulations; Wells, ME AGENCY: Coast Guard... special anchorage areas in Wells Harbor, Wells, Maine. This proposed action is necessary to facilitate... in length. This action is intended to increase the safety of life and property in Wells...

  1. 25 CFR 227.23 - Wells.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Wells. 227.23 Section 227.23 Indians BUREAU OF INDIAN... RESERVATION, WYOMING, FOR OIL AND GAS MINING Operations § 227.23 Wells. The lessee shall agree (a) to drill and produce all wells necessary to offset or protect the leased land from drainage by wells...

  2. 25 CFR 213.32 - Wells.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Wells. 213.32 Section 213.32 Indians BUREAU OF INDIAN... CIVILIZED TRIBES, OKLAHOMA, FOR MINING Operations § 213.32 Wells. The lessee shall agree (a) to drill and produce all wells necessary to offset or protect the leased land from drainage by wells on adjoining...

  3. Mechanics classical and quantum

    CERN Document Server

    Taylor, T T

    2015-01-01

    Mechanics: Classical and Quantum explains the principles of quantum mechanics via the medium of analytical mechanics. The book describes Schrodinger's formulation, the Hamilton-Jacobi equation, and the Lagrangian formulation. The author discusses the Harmonic Oscillator, the generalized coordinates, velocities, as well as the application of the Lagrangian formulation to systems that are partially or entirely electromagnetic in character under certain conditions. The book examines waves on a string under tension, the isothermal cavity radiation, and the Rayleigh-Jeans result pertaining to the e

  4. Mechanism of Gravity Impulse

    Institute of Scientific and Technical Information of China (English)

    WU Ning

    2006-01-01

    It is well known that energy-momentum is the source of gravitational field. For a long time, it is generally believed that only stars with huge masses can generate strong gravitational field. Based on the unified theory of gravitational interactions and electromagnetic interactions, a new mechanism of the generation of gravitational field is studied. According to this mechanism, in some special conditions, electromagnetic energy can be directly converted into gravitational energy, and strong gravitational field can be generated without massive stars. Gravity impulse found in experiments is generated by this mechanism.

  5. Simple simulation for electron energy levels in geometrical potential wells

    CERN Document Server

    Pengpan, Teparksorn

    2008-01-01

    An octopus program is demonstrated to generate electron energy levels in three-dimensional geometrical potential wells. The wells are modeled to have shapes similar to cone, pyramid and truncated-pyramid. To simulate the electron energy levels in quantum mechanical scheme like the ones in parabolic band approximation scheme, the program is run initially to find a suitable electron mass fraction that can produce ground-state energies in the wells as close to those in quantum dots as possible and further to simulate excited-state energies. The programs also produce wavefunctions for exploring and determining their degeneracies and vibrational normal modes.

  6. A framework for exploring adolescent wellness.

    Science.gov (United States)

    Spurr, Shelley; Bally, Jill; Ogenchuk, Marcella; Walker, Keith

    2012-01-01

    This article presents and explains a "Framework for Exploring Adolescent Wellness" and outlines a research approach used to explore adolescent wellness specific to the discipline of nursing. The "Framework for Exploring Adolescent Wellness" assessed the concept of wellness through the perceptions of youth and sought to explain the relationship between adolescent well-being and development. A wellness survey was used to collect data from 280 youth, 16 to 20 years old, in two Western Canadian high schools. Their perceptions of wellness meant more to them than regular physical activity and healthy eating. The majority of youth suggested that psychological (89%), social (85%), and physical (80%) development made the most significant contribution to adolescent wellness. Slightly more than half the youth felt that spirituality (53%) contributed to their sense of wellness. These research findings indicate the need for an approach to adolescent nursing care that includes a high priority and greater visibility to the practice and philosophy of wellness.

  7. Recommender System for Personalised Wellness Therapy

    Directory of Open Access Journals (Sweden)

    Thean Pheng Lim

    2013-10-01

    Full Text Available rising costs and risks in health care have shifted the preference of individuals from health treatment to disease prevention. This prevention treatment is known as wellness. In recent years, the Internet has become a popular place for wellness-conscious users to search for wellness-related information and solutions. As the user community becomes more wellness conscious, service improvement is needed to help users find relevant personalised wellness solutions. Due to rapid development in the wellness market, users value convenient access to wellness services. Most wellness websites reflect common health informatics approaches; these amount to more than 70,000 sites worldwide. Thus, the wellness industry should improve its Internet services in order to provide better and more convenient customer service. This paper discusses the development of a wellness recommender system that would help users find and adapt suitable personalised wellness therapy treatments based on their individual needs. This paper introduces new approaches that enhance the convenience and quality of wellness information delivery on the Internet. The wellness recommendation task is performed using an Artificial Intelligence technique of hybrid case-based reasoning (HCBR. HCBR solves users’ current wellness problems by applying solutions from similar cases in the past. From the evaluation results for our prototype wellness recommendation system, we conclude that wellness consultants are using consistent wellness knowledge to recommend solutions for sample wellness cases generated through an online consultation form. Thus, the proposed model can be integrated into wellness websites to enable users to search for suitable personalized wellness therapy treatment based on their health condition.

  8. Control mechanisms for ecological-economic systems

    CERN Document Server

    Burkov, Vladimir N; Shchepkin, Alexander V

    2015-01-01

    This monograph presents and analyzes the optimization, game-theoretic and simulation models of control mechanisms for ecological-economic systems. It is devoted to integrated assessment mechanisms for total risks and losses, penalty mechanisms, risk payment mechanisms, financing and costs compensation mechanisms for risk level reduction, sales mechanisms for risk level quotas, audit mechanisms, mechanisms for expected losses reduction, economic motivation mechanisms, optimization mechanisms for regional environmental (risk level reduction) programs, and mechanisms for authorities' interests coordination. The book is aiming at undergraduate and postgraduate students, as well as at experts in mathematical modeling and control of ecological economic, socioeconomic and organizational systems.

  9. Quantum mechanics

    CERN Document Server

    Powell, John L

    2015-01-01

    Suitable for advanced undergraduates, this thorough text focuses on the role of symmetry operations and the essentially algebraic structure of quantum-mechanical theory. Based on courses in quantum mechanics taught by the authors, the treatment provides numerous problems that require applications of theory and serve to supplement the textual material.Starting with a historical introduction to the origins of quantum theory, the book advances to discussions of the foundations of wave mechanics, wave packets and the uncertainty principle, and an examination of the Schrödinger equation that includ

  10. Robot Mechanisms

    CERN Document Server

    Lenarcic, Jadran; Stanišić, Michael M

    2013-01-01

    This book provides a comprehensive introduction to the area of robot mechanisms, primarily considering industrial manipulators and humanoid arms. The book is intended for both teaching and self-study. Emphasis is given to the fundamentals of kinematic analysis and the design of robot mechanisms. The coverage of topics is untypical. The focus is on robot kinematics. The book creates a balance between theoretical and practical aspects in the development and application of robot mechanisms, and includes the latest achievements and trends in robot science and technology.

  11. Fluid mechanics

    CERN Document Server

    Kundu, Pijush K; Dowling, David R

    2011-01-01

    Fluid mechanics, the study of how fluids behave and interact under various forces and in various applied situations-whether in the liquid or gaseous state or both-is introduced and comprehensively covered in this widely adopted text. Revised and updated by Dr. David Dowling, Fluid Mechanics, 5e is suitable for both a first or second course in fluid mechanics at the graduate or advanced undergraduate level. Along with more than 100 new figures, the text has been reorganized and consolidated to provide a better flow and more cohesion of topics.Changes made to the

  12. Gauge mechanics

    CERN Document Server

    Mangiarotti, L

    1998-01-01

    This book presents in a unified way modern geometric methods in analytical mechanics based on the application of fibre bundles, jet manifold formalism and the related concept of connection. Non-relativistic mechanics is seen as a particular field theory over a one-dimensional base. In fact, the concept of connection is the major link throughout the book. In the gauge scheme of mechanics, connections appear as reference frames, dynamic equations, and in Lagrangian and Hamiltonian formalisms. Inertial forces, energy conservation laws and other phenomena related to reference frames are analyzed;

  13. Review of Well Operator Files for Hydraulically Fractured Oil and Gas Production Wells: Well Design and Construction Fact Sheet

    Science.gov (United States)

    EPA reviewed a statistically representative sample of oil and gas production wells reported by nine service companies to help understand the role of well design and construction practices preventing pathways for subsurface fluid movement.

  14. Design on hopping locomotion mechanism

    Institute of Scientific and Technical Information of China (English)

    LU Yong-kui; WU Yue-hua; YANG Jie; Hisayuki AOYAMA

    2005-01-01

    A new type of locomotion mechanism is introduced in this paper. With vibrating motors used in controling the movement of the hopping locomotion mechanism, the simple hopping locomotion mechanism had two motors, when the current went through the vertical motor, the vertical motor would vibrate to cause the mechanism to go forward, and when the current went through the horizontal motor, the mechanism will go around itself. A spring was added to the mechanism to change the natural frequency of the mechanism, when the frequency of the motor was equal to the natural frequency of the mechanism, the mechanism would hop resonantly. With the resonant hopping, the load of the mechanism was greatly enlarged, and some sensors could be added to the mechanism. Optical sensors were used to detect the infrared source, the current that went through the sensors related to the distance between the infrared light. Three optical sensors was put on the left, right and the front the mechanism, when the mechanism detect the special infrared source, it would turn itself to the light, and go forward to the light. The experiments of the mechanism shown that the mechanism could work well on different surfaces freely, and the resonant hopping locomotion mechanism with infrared sensors could move to the special light by automatic regulation. Experimental results and theoretical studies demonstrate that the innovative design for hopping locomotion mechanism is superior.

  15. Nitrogen Monitoring of West Hackberry 117 Cavern Wells

    Energy Technology Data Exchange (ETDEWEB)

    Bettin, Giorgia [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lord, David L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-02-01

    U.S. Strategic Petroleum Reserve (SPR) oil storage cavern West Hackberry 117 was tested under extended nitrogen monitoring following a successful mechanical integrity test in order to validate a newly developed hydrostatic column model to be used to differentiate between normal "tight" well behavior and small-leak behavior under nitrogen. High resolution wireline pressure and temperature data were collected during the test period and used in conjunction with the hydrostatic column model to predict the nitrogen/oil interface and the pressure along the entire fluid column from the bradenhead flange nominally at ground surface to bottom of brine pool. Results here and for other SPR caverns have shown that wells under long term nitrogen monitoring do not necessarily pressurize with a relative rate (P N2 /P brine) of 1. The theoretical relative pressure rate depends on the well configuration, pressure and the location of the nitrogen-oil interface and varies from well to well. For the case of WH117 the predicted rates were 0.73 for well A and 0.92 for well B. The measured relative pressurization rate for well B was consistent with the model prediction, while well A rate was found to be between 0.58-0.68. A number of possible reasons for the discrepancy between the model and measured rates of well A are possible. These include modeling inaccuracy, measurement inaccuracy or the possibility of the presence of a very small leak (below the latest calculated minimum detectable leak rate).

  16. Nitrogen Monitoring of West Hackberry 117 Cavern Wells.

    Energy Technology Data Exchange (ETDEWEB)

    Bettin, Giorgia; Lord, David

    2015-02-01

    U.S. Strategic Petroleum Reserve (SPR) oil storage cavern West Hackberry 117 was tested under extended nitrogen monitoring following a successful mechanical integrity test in order to validate a newly developed hydrostatic column model to be used to differentiate between normal "tight" well behavior and small-leak behavior under nitrogen. High resolution wireline pressure and temperature data were collected during the test period and used in conjunction with the hydrostatic column model to predict the nitrogen/oil interface and the pressure along the entire fluid column from the bradenhead flange nominally at ground surface to bottom of brine pool. Results here and for other SPR caverns have shown that wells under long term nitrogen monitoring do not necessarily pressurize with a relative rate (P N2 /P brine) of 1. The theoretical relative pressure rate depends on the well configuration, pressure and the location of the nitrogen-oil interface and varies from well to well. For the case of WH117 the predicted rates were 0.73 for well A and 0.92 for well B. The measured relative pressurization rate for well B was consistent with the model prediction, while well A rate was found to be between 0.58-0.68. A number of possible reasons for the discrepancy between the model and measured rates of well A are possible. These include modeling inaccuracy, measurement inaccuracy or the possibility of the presence of a very small leak (below the latest calculated minimum detectable leak rate).

  17. Optimization of horizontal well staggered patterns

    Institute of Scientific and Technical Information of China (English)

    Zhao Chunsen; Li Peijing; Guan Dan; Liu Qingjuan

    2008-01-01

    Staggered line-drive patterns are widely used in oilfields. In this paper, to optimize a staggered pattern of horizontal wells, a 3D problem was divided into two 2D (x-y plane and y-z plane) problems with the pseudo-3D method, conformal transformation and superposition principle. A productivity equation for a horizontal well was deduced, which can be used to optimize the well pattern. A relationship between the length of horizontal wells and the shape factor of well patterns was established. The result shows that optimized well patterns can improve oil production from horizontal wells. This provides a theoretical basis for horizontal well applications to the development of oilfieids, especially for overall development of oilfields by horizontal wells.

  18. Fracture mechanics

    CERN Document Server

    Perez, Nestor

    2017-01-01

    The second edition of this textbook includes a refined presentation of concepts in each chapter, additional examples; new problems and sections, such as conformal mapping and mechanical behavior of wood; while retaining all the features of the original book. The material included in this book is based upon the development of analytical and numerical procedures pertinent to particular fields of linear elastic fracture mechanics (LEFM) and plastic fracture mechanics (PFM), including mixed-mode-loading interaction. The mathematical approach undertaken herein is coupled with a brief review of several fracture theories available in cited references, along with many color images and figures. Dynamic fracture mechanics is included through the field of fatigue and Charpy impact testing. Explains computational and engineering approaches for solving crack-related problems using straightforward mathematics that facilitate comprehension of the physical meaning of crack growth processes; Expands computational understandin...

  19. Quantum Mechanics

    Science.gov (United States)

    Mandl, F.

    1992-07-01

    The Manchester Physics Series General Editors: D. J. Sandiford; F. Mandl; A. C. Phillips Department of Physics and Astronomy, University of Manchester Properties of Matter B. H. Flowers and E. Mendoza Optics Second Edition F. G. Smith and J. H. Thomson Statistical Physics Second Edition F. Mandl Electromagnetism Second Edition I. S. Grant and W. R. Phillips Statistics R. J. Barlow Solid State Physics Second Edition J. R. Hook and H. E. Hall Quantum Mechanics F. Mandl Particle Physics Second Edition B. R. Martin and G. Shaw The Physics of Stars Second Edition A. C. Phillips Computing for Scientists R. J. Barlow and A. R. Barnett Quantum Mechanics aims to teach those parts of the subject which every physicist should know. The object is to display the inherent structure of quantum mechanics, concentrating on general principles and on methods of wide applicability without taking them to their full generality. This book will equip students to follow quantum-mechanical arguments in books and scientific papers, and to cope with simple cases. To bring the subject to life, the theory is applied to the all-important field of atomic physics. No prior knowledge of quantum mechanics is assumed. However, it would help most readers to have met some elementary wave mechanics before. Primarily written for students, it should also be of interest to experimental research workers who require a good grasp of quantum mechanics without the full formalism needed by the professional theorist. Quantum Mechanics features: A flow diagram allowing topics to be studied in different orders or omitted altogether. Optional "starred" and highlighted sections containing more advanced and specialized material for the more ambitious reader. Sets of problems at the end of each chapter to help student understanding. Hints and solutions to the problems are given at the end of the book.

  20. Precision mechanics

    CERN Document Server

    Kittell, David

    1989-01-01

    David Kittell, the father of the discipline, Precision Mechanics, shares the foundation of this science with you in his highly practical and fun to read book, Precision Mechanics. Based on his highly acclaimed course by the same name, first taught at the Perkin-Elmer Technical institute in Norwalk, Connecticut, and later as a short course offered in such places as Bell Labs, SPIE, IEEE, NASA, and several national labs, you will find this book relevant and immediately useful.

  1. The finite square well: whatever is worth teaching at all is worth teaching well

    CERN Document Server

    Naqvi, K Razi

    2015-01-01

    A contemporary physicist would be hard put to agree entirely with the author of a 1959 textbook on quantum mechanics, who wrote: "A second simple, one-dimensional system, somewhat divorced from reality but illustrative of the principles of the theory, is a particle in a box with finite walls." Interest in this prototypic system has not diminished over the years, and is not likely to do so in the near future, because it has now been wedded to reality and seen as a paradigm for quantum wells and other nanosystems. The treatment of this topic in standard textbooks has changed little over the last few decades, and such changes as have come to our notice leave, in our opinion, much to be desired. The purpose of this article is to enable, even encourage, other teachers to give the finite square well the attention that it deserves; to this end, the authors provide a tutorial review that is more instructive and comprehensive than the accounts presented in numerous textbooks and dispensed in still more numerous online...

  2. Silicon Germanium Quantum Well Solar Cell Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Quantum-well structures embodied on single crystal silicon germanium drastically enhanced carrier mobilities.  The cell-to-cell circuits of quantum-well PV...

  3. Learning to Live Well with Celiac Disease

    Science.gov (United States)

    ... page please turn JavaScript on. Feature: Celiac Disease Learning to Live Well with Celiac Disease Past Issues / ... Symptoms, Diagnosis & Treatment / Four Inches and Seven Pounds… / Learning to Live Well with Celiac Disease / Living Gluten- ...

  4. Cutting the cost of well clusters

    Energy Technology Data Exchange (ETDEWEB)

    Esau, I.

    1995-09-01

    This article focuses on recent subsea systems based on satellite wells clustered around a central manifold instead of the conventional systems which use multiwell templates with integrated manifolds. Advantages of the Unitised Well Cluster developed by Sonsub are discussed. (UK)

  5. Predictors of wellness and American Indians.

    Science.gov (United States)

    Hodge, Felicia S; Nandy, Karabi

    2011-08-01

    Wellness is an important American Indian (AI) concept, understood as being in balance with one's body, mind, and environment. Wellness predictors are reported in this paper within the context of health. A cross-sectional randomized household survey of 457 AI adults at 13 rural health care sites in California was conducted. Measures included wellness perceptions, barriers, health status/health conditions, spirituality, cultural connectivity, high-risk behaviors and abuse history. Statistical analysis obtained the best predictive model for wellness. Predictors of wellness were general health status perception, participation in AI cultural practices and suicide ideation. Significant differences in wellness status were observed depending on experience of adverse events in childhood and adulthood (neglect, physical abuse, and sexual abuse). Cultural connectivity (speaking tribal language, participating in AI practices, and feeling connected to community) was also associated with perceptions of wellness. Recommendations are for culturally-appropriate education and interventions emphasizing community and cultural connectivity for improving wellness status.

  6. Welle tecnologia laser internationalization analysis US market

    OpenAIRE

    2016-01-01

    Welle Laser is a Brazilian company that manufactures marking and engraving machines mainly for large-scale industry segments providing solutions that help increase productivity. Welle laser has 60% market share in Brazil and decided to go internationally in 2015, mainly to increase revenues and diversify business risks. Welle opened an office in Switzerland and celebrated a contract with a Mexican company to distribute their machines in Mexico. The next step for Welle is expanding its operati...

  7. DETERMINING TRAVEL MOTIVATIONS OF WELLNESS TOURISM

    OpenAIRE

    Težak Damijanić, Ana; Šergo, Zdravko

    2013-01-01

    Wellness tourism is a relatively new form of tourism based on special interest of consumers. In order to create appropriate marketing strategy it is necessary to better understand travel motivation for this segment. The purpose of this paper is to explore travel motives in the context of wellness tourism. The aim of this paper is twofold: 1) to determine how well the general proposed structure of push and pull motivating factors applies to tourists who consider wellness services an important ...

  8. Study on the petroleum recovery technology: well testing analysis

    Energy Technology Data Exchange (ETDEWEB)

    Huh, Dae Gee; Kim, Se Joon; Kim, Hyun Tae [Korea Inst. of Geology Mining and Materials, Taejon (Korea, Republic of)

    1995-12-01

    Well testing is one of the most widely used tools to characterize reservoirs throughout the entire life of petroleum exploration and production. In this study, we first try to set up a procedure of computer aided well test analysis and then attempt to characterize potential reservoirs by performing well test analysis for some of the exploratory wells in the Korean continental shelf. A couple of gas well testing data already published in the literature were also analyzed and compared. First task was to analyze the drill stem test(DST) in KCS-1 gas well. The second analysis was also DST data on multi-rate gas wells. The third case is a Devonian shale reservoir. The final problem is a multi-rate drawdown test without early time pressure data. It is now possible to analyze insufficient well test data with less accuracy. One remark should be pointed out on multi-rate gas well testing. It is recommended to have variable skins rather than a constant skin because rate dependent skins due to turbulence of gas flow must be considered in addition to the mechanical skin. (author). 14 refs.

  9. Innovativeness and Subjective Well-Being

    Science.gov (United States)

    Binder, Martin

    2013-01-01

    What are the effects of innovativeness on well-being? This paper argues that research on subjective well-being has progressed to a point where measures of subjective well-being (or: happiness) can usefully be employed to assess the welfare effects of innovative change. Based on a discussion of the prospects and pitfalls associated with subjective…

  10. Measuring Well-Being and Progress

    Science.gov (United States)

    D'Acci, Luca

    2011-01-01

    Well-being is becoming a concept which is more and more involved in any world development consideration. A large amount of work is being carried out to study measurements of well-being, including a more holistic vision on the development and welfare of a country. This paper proposes an idea of well-being and progress being in equilibrium with each…

  11. [Promoting "well-treatment" in medical imaging].

    Science.gov (United States)

    Renouf, Nicole; Llop, Marc

    2012-12-01

    A project to promote "well-treatment" has been initiated in the medical imaging department of a Parisian hospital. With the aim of promoting the well-being of the patient and developing shared values of empathy and respect, the members of this medico-technical team have undertaken to build a culture of "well-treatment" which respects the patient's dignity and rights.

  12. Innovativeness and Subjective Well-Being

    Science.gov (United States)

    Binder, Martin

    2013-01-01

    What are the effects of innovativeness on well-being? This paper argues that research on subjective well-being has progressed to a point where measures of subjective well-being (or: happiness) can usefully be employed to assess the welfare effects of innovative change. Based on a discussion of the prospects and pitfalls associated with subjective…

  13. Promoting Subjective Well-Being at Work

    Science.gov (United States)

    Russell, Joyce E. A.

    2008-01-01

    Research has clearly shown the relationship between subjective well-being and work performance, even though there is debate over the causality of that relationship (i.e., does subjective well-being cause higher work performance or does greater work performance lead to subjective well-being?). Regardless, researchers and practitioners would agree…

  14. Residential Mechanical Precooling

    Energy Technology Data Exchange (ETDEWEB)

    German, a. [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States); Hoeschele, M. [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States)

    2014-12-01

    This research conducted by the Alliance for Residential Building Innovation team evaluated mechanical air conditioner pre-cooling strategies in homes throughout the United States. EnergyPlus modeling evaluated two homes with different performance characteristics in seven climates. Results are applicable to new construction homes and most existing homes built in the last 10 years, as well as fairly efficient retrofitted homes.

  15. Statistical mechanics of pluripotency.

    Science.gov (United States)

    MacArthur, Ben D; Lemischka, Ihor R

    2013-08-01

    Recent reports using single-cell profiling have indicated a remarkably dynamic view of pluripotent stem cell identity. Here, we argue that the pluripotent state is not well defined at the single-cell level but rather is a statistical property of stem cell populations, amenable to analysis using the tools of statistical mechanics and information theory.

  16. Well integrity failure in the UK

    Science.gov (United States)

    Worrall, F.

    2015-12-01

    The aim of this study was to consider the potential legacy of increased onshore, unconventional gas production by examining the integrity of decommissioned, onshore, oil and gas wells in the UK. In the absence of a history of unconventional hydrocarbon exploitation in the UK, conventional onshore sites were considered and an examination of pollution incidents records had suggested that only a small fraction of operational, onshore wells could show integrity failures. A consideration of groundwater and surface water quality monitoring could find no regional impact of historic or current conventional oil and gas exploitation in the UK. As a more direct measure of well legacy this study considered the fugitive emissions of methane from former oil and gas wells onshore in the UK as a measure of well integrity. The survey considered 102 decommissioned (abandoned) wells from 4 different basins that were between 8 and 78 years old; all but one of these wells would be considered as having been decommissioned properly, i.e. wells cut, sealed and buried by soil cover to the extent that the well sites were being used for agriculture. For each well site the soil gas methane was analysed multiple times and assessed relative to a nearby control site of similar land-use and soil type. The results showed that of the 102 wells surveyed, 30% had soil gas CH4 at the soil surface that was significantly greater than their respective control. Conversely, 39% of well sites had significant lower surface soil gas CH4 concentrations than their respective control. We interpret elevated soil gas CH4 concentrations to be the result of well integrity failure, but do not know the source of the gas nor the route to the surface. Where elevated CH4 was detected it appears to have occurred within a decade of the well being decommissioned. The flux of CH4 from wells was 364 ± 677 kg CO2eq/well/yr with a 27% chance that any well would be a net sink of CH4 independent of well age. This flux is low

  17. Boys and girls who reason well mathematically.

    Science.gov (United States)

    Stanley, J C

    1993-01-01

    Since 1971 the Study of Mathematically Precocious Youth (SMPY) at Johns Hopkins University has pioneered in discovery of and provision of educational help for 12-year-old boys and girls who reason better mathematically than 99% of other 12-year-olds. SMPY originated widespread searches for such youths and special academic classes for them outside the regular school system. A regional talent search, verbal as well as mathematical, now covers all 50 states of the USA, and many varied residential summer programmes are offered across the country. These have provided educational facilitation for many thousands, and have encouraged greater curricular flexibility in schools and better articulation of in-school with out-of-school learning experiences. From the first talent search conducted by SMPY in 1972, it became obvious that boys tend to score considerably higher than girls on the College Board Scholastic Aptitude Test-Mathematical (SAT-M), a test intended mainly for college-bound 17- and 18-year-olds. This difference was reported in 1974 but attracted little attention until a controversial report in 1980 stimulated research on sex differences in various aspects of mathematics. Here I describe a study of sex differences over 10 years on 14 College Board high school achievement tests, which are taken (three usually) by bright 17- and 18-year-olds seeking admission to the USA's selective colleges and universities. Among the high scores on the European history test the ratio of males to females was greatest, 6:1. The next most sex-differentiating test was physics, 2.9:1, followed by elementary-level mathematics (mainly algebra and geometry), 2.5:1. Other ratios favouring males were, in 1991, chemistry (2.4:1), American history (2.1:1), biology (1.8:1), precalculus mathematics (1.6:1), Latin (1.6:1), French (1.4:1), modern Hebrew (1.1:1) and German (1.02:1). Tests in which more females were high scorers were literature (1.26:1), English composition (1.05:1) and Spanish (1

  18. Labor Capacity,Subjective Well-being and the Protection for the Weak Groups of the Young Migrant Labors---Lack of Protection Mechanism in Cities for the Vulnerable Generation of Migrant Workers%劳动能力、主观幸福感与新生代农民工弱势保护*--城市缺乏对弱势新生代农民工的保护机制

    Institute of Scientific and Technical Information of China (English)

    董明媛; 胡宏伟; 路红红

    2014-01-01

    伴随我国城市化进程加快,新生代农民工生活水平提高的同时幸福感问题凸显。调查分析发现,劳动能力较差者的主观幸福感较低,二者呈负相关,回归分析表明健康状况对其心理问题具有显著、稳健的负向影响,这进一步说明劳动能力较差是降低主观幸福感的重要原因。针对这一结论,立足弱势新生代农民工保护机制的构建,在劳动就业与社会保障等环节增加对这个群体的关怀以助于提升其劳动能力,进而增强其主观幸福感。%With the rapid urbanization in China,the living standard of the young migrant workers is improving while the happiness problem is prominent. Data analysis found that the young migrant labors with poorer labor ability have lower subjective well-being. There is a significant negative correlation between the two aspects and the regression analysis found that their healthy state has significant, steady and negative influence on the psychological problems. This further explained that poorer labor ability is the important reason for their low subjective well-being. Based on the weak protection mechanism,more attention should be paid to the young migrant labors on some aspects such as employment and social security in order to improve their labor ability. And then,this can contribute to improving their subjective well-being.

  19. On the Hydraulics of Flowing Horizontal Wells

    Science.gov (United States)

    Bian, A.; Zhan, H.

    2003-12-01

    A flowing horizontal well is a special type of horizontal well that does not have pumping/injecting facility. The discharge rate of a flowing horizontal well is controlled by the hydraulic gradient between the aquifer and the well and it generally varies with time if the hydraulic head of the aquifer is transient. This type of well has been used in landslide control, mining dewatering, water table control, underground water transportation through a horizontal tunnel, agricultural water drainage, and other applications. Flowing horizontal wells have quite different hydrodynamic characteristics from horizontal wells with fixed pumping or injecting rates because their discharge rates are functions of the aquifer hydraulic heads (Zhan et al, 2001; Zhan and Zlotnik, 2002). Hydraulics of flowing horizontal wells have rarely been studied although the hydraulics of flowing vertical wells have been extensively investigated before. The purpose of this paper is to obtain analytical solutions of groundwater flow to a flowing horizontal-well in a confined aquifer, in a water table aquifer without precipitation, and in a water table aquifer with precipitation. The functions of the flowing horizontal well discharge rates versus time will be obtained under above mentioned different aquifer conditions. The relationships of the aquifer hydraulic heads versus the discharge rates of the well will be investigated. The rate of water table decline due to the dewatering of the well will also be computed, and this solution is particularly useful for landslide control and mining dewatering. The theoretical solutions will be compared with results of experiments that will be conducted in the hydrological laboratory at Texas A&M University. Reference: Zhan, H., Wang, L.V., and Park, E, On the horizontal well pumping tests in the anisotropic confined aquifers, J. hydrol., 252, 37-50, 2001. Zhan, H., and Zlotnik, V. A., Groundwater flow to a horizontal or slanted well in an unconfined aquifer

  20. 货币政策房地产市场传导机制研究--基于SVAR模型的实证分析%Can the Monetary Transmission Mechanism Function Well in Chinese Housing Market--based on an SVAR model

    Institute of Scientific and Technical Information of China (English)

    王成

    2014-01-01

    基于2000-2013年房地产市场相关月度时间序列数据,构建货币政策房地产市场传导机制的理论框架,建立8个变量的结构向量自回归模型(SVAR)分析货币政策、房地产供给需求和消费投资等实体经济变量的相互关系,研究表明货币政策尤其是利率政策能显著影响房地产供给需求,但房地产需求对消费的正向冲击影响十分有限,对投资反而产生负向冲击。由此提出,利率政策应当关注房地产价格波动,避免房地产价格非理性上涨对宏观经济的负面影响。%This paper proposed a framework of the monetary transmission mechanism in housing market,based on an SVAR model of 8 variables,using the monthly time series data of Chinese housing market from 2000 to 2013,empirically tested the interaction of monetary policy,housing supply&demand,consumption and investment. The results show that,the interest policy can take an active effect on housing supply&demand,but housing demand gives an limited positive impulse to consumption,while giving a negative impulse to investment.To prevent the damage of irrational housing bubbles to economy,it is necessary to take housing prices fluctuating into the consideration of interest policy.

  1. Hydrocarbons associated with brines from geopressured wells

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-15

    Efforts to determine the concentration of the cryocondensates in fluids of the various USDOE Geopressured wells a function of production volume. The wells are visited monthly as they are operating and samples are reported taken cryogenically during each visit. A gas scrubbing system continuously sample the gas streams of the wells in the intergas scrubbing system continuously sample the gas streams of the wells in the intervals between visit. Results obtained are to correlated the production of the collected compounds with reservoir and well production characteristics.

  2. Well-being of young unemployed people

    OpenAIRE

    Takala, Johannes; Woge, Henok

    2017-01-01

    Purpose: The purpose of this Thesis was to find out how to promote health and well-being of young unemployed people. As well as to find out what is the well-being of young unemployed people in Finland based on researches made in Finland and internationally. This Thesis was done for RUORI project which aims to promote the well-being, health and employment of people. Aim: This Thesis was aimed for healthcare professionals and people interested in health and well-being of young unemployed. This ...

  3. Quantum mechanics

    CERN Document Server

    Fitzpatrick, Richard

    2015-01-01

    Quantum mechanics was developed during the first few decades of the twentieth century via a series of inspired guesses made by various physicists, including Planck, Einstein, Bohr, Schroedinger, Heisenberg, Pauli, and Dirac. All these scientists were trying to construct a self-consistent theory of microscopic dynamics that was compatible with experimental observations. The purpose of this book is to present quantum mechanics in a clear, concise, and systematic fashion, starting from the fundamental postulates, and developing the theory in as logical manner as possible. Topics covered in the book include the fundamental postulates of quantum mechanics, angular momentum, time-dependent and time-dependent perturbation theory, scattering theory, identical particles, and relativistic electron theory.

  4. Analytical mechanics

    CERN Document Server

    Helrich, Carl S

    2017-01-01

    This advanced undergraduate textbook begins with the Lagrangian formulation of Analytical Mechanics and then passes directly to the Hamiltonian formulation and the canonical equations, with constraints incorporated through Lagrange multipliers. Hamilton's Principle and the canonical equations remain the basis of the remainder of the text. Topics considered for applications include small oscillations, motion in electric and magnetic fields, and rigid body dynamics. The Hamilton-Jacobi approach is developed with special attention to the canonical transformation in order to provide a smooth and logical transition into the study of complex and chaotic systems. Finally the text has a careful treatment of relativistic mechanics and the requirement of Lorentz invariance. The text is enriched with an outline of the history of mechanics, which particularly outlines the importance of the work of Euler, Lagrange, Hamilton and Jacobi. Numerous exercises with solutions support the exceptionally clear and concise treatment...

  5. Quantum mechanics

    CERN Document Server

    Ghosh, P K

    2014-01-01

    Quantum mechanics, designed for advanced undergraduate and graduate students of physics, mathematics and chemistry, provides a concise yet self-contained introduction to the formal framework of quantum mechanics, its application to physical problems and the interpretation of the theory. Starting with a review of some of the necessary mathematics, the basic concepts are carefully developed in the text. After building a general formalism, detailed treatment of the standard material - the harmonic oscillator, the hydrogen atom, angular momentum theory, symmetry transformations, approximation methods, identical particle and many-particle systems, and scattering theory - is presented. The concluding chapter discusses the interpretation of quantum mechanics. Some of the important topics discussed in the book are the rigged Hilbert space, deformation quantization, path integrals, coherent states, geometric phases, decoherene, etc. This book is characterized by clarity and coherence of presentation.

  6. Direction of drilling wells. Wiercenie otworow kierunkowych

    Energy Technology Data Exchange (ETDEWEB)

    Szostak, L.

    1980-01-01

    In the example of the most widespread drilling of vertical wells, an examination is made of the mining-geological and technical-technological reasons and methods for evaluating the amount of their twisting. Methods are presented for stabilizing the drilling shaft, features of drilling vertical wells by turbodrills and groups of wells for freezing rocks. Characteristics are presented for the features of directional drilling, model profiles of directed wells, drilling of wells with assigned deviation of the face from the vertical axis. Possibilities are indicated for controlling the trajectory of movement of the face of the well with the rotary method of drilling, in particular, with the use of a deviating wedge, cement plug, etc., methods of drilling inclined wells on cased and uncased sections. Features are examined of creating and controlling the inclination of a well with the use of turbodrills of different design, technology of drilling and casing of multiple-face wells, drilling of a fan of wells from one position of the drilling unit, for example, with unfavorable relief of the earth's surface and drilling of offshore wells by using floating drilling units.

  7. Wave Mechanics or Wave Statistical Mechanics

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    By comparison between equations of motion of geometrical optics and that of classical statistical mechanics, this paper finds that there should be an analogy between geometrical optics and classical statistical mechanics instead of geometrical mechanics and classical mechanics. Furthermore, by comparison between the classical limit of quantum mechanics and classical statistical mechanics, it finds that classical limit of quantum mechanics is classical statistical mechanics not classical mechanics, hence it demonstrates that quantum mechanics is a natural generalization of classical statistical mechanics instead of classical mechanics. Thence quantum mechanics in its true appearance is a wave statistical mechanics instead of a wave mechanics.

  8. Computational mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Raboin, P J

    1998-01-01

    The Computational Mechanics thrust area is a vital and growing facet of the Mechanical Engineering Department at Lawrence Livermore National Laboratory (LLNL). This work supports the development of computational analysis tools in the areas of structural mechanics and heat transfer. Over 75 analysts depend on thrust area-supported software running on a variety of computing platforms to meet the demands of LLNL programs. Interactions with the Department of Defense (DOD) High Performance Computing and Modernization Program and the Defense Special Weapons Agency are of special importance as they support our ParaDyn project in its development of new parallel capabilities for DYNA3D. Working with DOD customers has been invaluable to driving this technology in directions mutually beneficial to the Department of Energy. Other projects associated with the Computational Mechanics thrust area include work with the Partnership for a New Generation Vehicle (PNGV) for ''Springback Predictability'' and with the Federal Aviation Administration (FAA) for the ''Development of Methodologies for Evaluating Containment and Mitigation of Uncontained Engine Debris.'' In this report for FY-97, there are five articles detailing three code development activities and two projects that synthesized new code capabilities with new analytic research in damage/failure and biomechanics. The article this year are: (1) Energy- and Momentum-Conserving Rigid-Body Contact for NIKE3D and DYNA3D; (2) Computational Modeling of Prosthetics: A New Approach to Implant Design; (3) Characterization of Laser-Induced Mechanical Failure Damage of Optical Components; (4) Parallel Algorithm Research for Solid Mechanics Applications Using Finite Element Analysis; and (5) An Accurate One-Step Elasto-Plasticity Algorithm for Shell Elements in DYNA3D.

  9. Mechanical instability

    CERN Document Server

    Krysinski, Tomasz

    2013-01-01

    This book presents a study of the stability of mechanical systems, i.e. their free response when they are removed from their position of equilibrium after a temporary disturbance. After reviewing the main analytical methods of the dynamical stability of systems, it highlights the fundamental difference in nature between the phenomena of forced resonance vibration of mechanical systems subjected to an imposed excitation and instabilities that characterize their free response. It specifically develops instabilities arising from the rotor-structure coupling, instability of control systems, the se

  10. Mechanical seals

    CERN Document Server

    Mayer, E

    1977-01-01

    Mechanical Seals, Third Edition is a source of practical information on the design and use of mechanical seals. Topics range from design fundamentals and test rigs to leakage, wear, friction and power, reliability, and special designs. This text is comprised of nine chapters; the first of which gives a general overview of seals, including various types of seals and their applications. Attention then turns to the fundamentals of seal design, with emphasis on six requirements that must be considered: sealing effectiveness, length of life, reliability, power consumption, space requirements, and c

  11. Soil mechanics

    Science.gov (United States)

    Mitchell, J. K.; Carrier, W. D., III; Houston, W. N.; Scott, R. F.; Bromwell, L. G.; Durgunoglu, H. T.; Hovland, H. J.; Treadwell, D. D.; Costes, N. C.

    1972-01-01

    Preliminary results are presented of an investigation of the physical and mechanical properties of lunar soil on the Descartes slopes, and the Cayley Plains in the vicinity of the LM for Apollo 16. The soil mechanics data were derived form (1) crew commentary and debriefings, (2) television, (3) lunar surface photography, (4) performance data and observations of interactions between soil and lunar roving vehicle, (5) drive-tube and deep drill samples, (6) sample characteristics, and (7) measurements using the SRP. The general characteristics, stratigraphy and variability are described along with the core samples, penetrometer test results, density, porosity and strength.

  12. Statistical mechanics

    CERN Document Server

    Davidson, Norman

    2003-01-01

    Clear and readable, this fine text assists students in achieving a grasp of the techniques and limitations of statistical mechanics. The treatment follows a logical progression from elementary to advanced theories, with careful attention to detail and mathematical development, and is sufficiently rigorous for introductory or intermediate graduate courses.Beginning with a study of the statistical mechanics of ideal gases and other systems of non-interacting particles, the text develops the theory in detail and applies it to the study of chemical equilibrium and the calculation of the thermody

  13. 八面河油田稠油热采井出砂机理及循环充填防砂工艺%On Mechanism of Sand Production of Thick Oil Thermal Production Wells and Circulation Pack Sand-Protection Technology

    Institute of Scientific and Technical Information of China (English)

    钱勇; 王天奇; 王圣晟; 方梦莉

    2011-01-01

    Two thickened oil blocks in Bamianhe Oilfield are weakly cemented lithogenous phase. Weak bonding is main reason for sand production in oil wells. Besides, steam-injection thermal drive has somewhat damaged reservoir and intensify the sand production. Circulation pack sand-protection technology, possessing secondary intercept filtering system which meets the requirement of both production capacity and control of sand production, features high intensity and long period of validity in sand protection in addition to its wide accommodation.%八面河油田两大稠油区块均为弱胶结成岩相。胶结疏松是造成油井出砂的主要原因,注蒸汽热采亦对储层造成了一定程度的伤害,加剧了油井的出砂。循环充填防砂工艺具有二级拦截过滤体系,较好兼顾了产能和控制出砂要求,防砂强度高,有效期长,工艺适应范围广。

  14. Applied mechanics of solids

    CERN Document Server

    Bower, Allan F

    2009-01-01

    Modern computer simulations make stress analysis easy. As they continue to replace classical mathematical methods of analysis, these software programs require users to have a solid understanding of the fundamental principles on which they are based. Develop Intuitive Ability to Identify and Avoid Physically Meaningless Predictions Applied Mechanics of Solids is a powerful tool for understanding how to take advantage of these revolutionary computer advances in the field of solid mechanics. Beginning with a description of the physical and mathematical laws that govern deformation in solids, the text presents modern constitutive equations, as well as analytical and computational methods of stress analysis and fracture mechanics. It also addresses the nonlinear theory of deformable rods, membranes, plates, and shells, and solutions to important boundary and initial value problems in solid mechanics. The author uses the step-by-step manner of a blackboard lecture to explain problem solving methods, often providing...

  15. Mechanical Enterogenesis - A Review

    Directory of Open Access Journals (Sweden)

    Rebecca Stark

    2012-01-01

    Full Text Available Mechanical enterogenesis is a novel method of lengthening pre-existing intestine with distractive force. The application of mechanical force on small intestine aims to induce cellular proliferation and ultimately increase bowel length. This has been investigated primarily for the treatment of short bowel syndrome (SBS. Research has been ongoing for well over a decade in this arena and a multitude of advances have been made, both in the understanding of the biology behind force induced cellular proliferation and in the basic mechanics of force delivery systems. Important experimental models have been developed for studying this phenomenon and the collaboration of engineers and medical researchers has lead to the design of several devices that successfully lengthen small intestine. This has catapulted the field forward and there may soon be a device suitable for medical use in humans. This review analyses the past, present and future of mechanical enterogenesis.

  16. Time in quantum mechanics

    CERN Document Server

    Mayato, R; Egusquiza, I

    2002-01-01

    The treatment of time in quantum mechanics is still an important and challenging open question in the foundation of the theory. This book describes the problems, and the attempts and achievements in defining, formalizing and measuring different time quantities in quantum theory, such as the parametric (clock) time, tunneling times, decay times, dwell times, delay times, arrival times or jump times. This multiauthored book, written as an introductory guide for the non-initiated as well as a useful source of information for the expert, covers many of the open questions. A brief historical overview is to be found in the introduction. It is followed by 12 chapters devoted to conceptual and theoretical investigations as well as experimental issues in quantum-mechanical time measurements. This unique monograph should attract physicists as well as philosophers of science working in the foundations of quantum physics.

  17. Piezo-Phototronic Effect in a Quantum Well Structure.

    Science.gov (United States)

    Huang, Xin; Du, Chunhua; Zhou, Yongli; Jiang, Chunyan; Pu, Xiong; Liu, Wei; Hu, Weiguo; Chen, Hong; Wang, Zhong Lin

    2016-05-24

    With enhancements in the performance of optoelectronic devices, the field of piezo-phototronics has attracted much attention, and several theoretical works have been reported based on semiclassical models. At present, the feature size of optoelectronic devices are rapidly shrinking toward several tens of nanometers, which results in the quantum confinement effect. Starting from the basic piezoelectricity equation, Schrödinger equation, Poisson equation, and Fermi's golden rule, a self-consistent theoretical model is proposed to study the piezo-phototronic effect in the framework of perturbation theory in quantum mechanics. The validity and universality of this model are well-proven with photoluminescence measurements in a single GaN/InGaN quantum well and multiple GaN/InGaN quantum wells. This study provides important insight into the working principle of nanoscale piezo-phototronic devices as well as guidance for the future device design.

  18. Mechanics of the Nucleus

    Science.gov (United States)

    Lammerding, Jan

    2015-01-01

    The nucleus is the distinguishing feature of eukaryotic cells. Until recently, it was often considered simply as a unique compartment containing the genetic information of the cell and associated machinery, without much attention to its structure and mechanical properties. This article provides compelling examples that illustrate how specific nuclear structures are associated with important cellular functions, and how defects in nuclear mechanics can cause a multitude of human diseases. During differentiation, embryonic stem cells modify their nuclear envelope composition and chromatin structure, resulting in stiffer nuclei that reflect decreased transcriptional plasticity. In contrast, neutrophils have evolved characteristic lobulated nuclei that increase their physical plasticity, enabling passage through narrow tissue spaces in their response to inflammation. Research on diverse cell types further demonstrates how induced nuclear deformations during cellular compression or stretch can modulate cellular function. Pathological examples of disturbed nuclear mechanics include the many diseases caused by mutations in the nuclear envelope proteins lamin A/C and associated proteins, as well as cancer cells that are often characterized by abnormal nuclear morphology. In this article, we will focus on determining the functional relationship between nuclear mechanics and cellular (dys-)function, describing the molecular changes associated with physiological and pathological examples, the resulting defects in nuclear mechanics, and the effects on cellular function. New insights into the close relationship between nuclear mechanics and cellular organization and function will yield a better understanding of normal biology and will offer new clues into therapeutic approaches to the various diseases associated with defective nuclear mechanics. PMID:23737203

  19. Fluid Mechanics.

    Science.gov (United States)

    Drazin, Philip

    1987-01-01

    Outlines the contents of Volume II of "Principia" by Sir Isaac Newton. Reviews the contributions of subsequent scientists to the physics of fluid dynamics. Discusses the treatment of fluid mechanics in physics curricula. Highlights a few of the problems of modern research in fluid dynamics. Shows that problems still remain. (CW)

  20. Classical Mechanics

    OpenAIRE

    Gallavotti, Giovanni

    2012-01-01

    This is the English version of a friendly graduate course on Classical Mechanics, containing about 80% of the material I covered during the January-June 1999 semester at IFUG in the Mexican city of Leon. For the Spanish version, see physics/9906066

  1. Fluid Mechanics.

    Science.gov (United States)

    Drazin, Philip

    1987-01-01

    Outlines the contents of Volume II of "Principia" by Sir Isaac Newton. Reviews the contributions of subsequent scientists to the physics of fluid dynamics. Discusses the treatment of fluid mechanics in physics curricula. Highlights a few of the problems of modern research in fluid dynamics. Shows that problems still remain. (CW)

  2. Understanding wellness center loyalty through lifestyle analysis.

    Science.gov (United States)

    Suresh, Satya; Ravichandran, Swathi; P, Ganesan

    2011-01-01

    Many changes taking place at a macro-level in Indian society along with the popularity of services that are native to India, such as Yoga and Ayurveda, have generated significant interest in wellness services. To assist wellness centers in gaining loyal clients, the goal of this study was to understand the influence of customer lifestyle factors on wellness center loyalty. The activities, interests, and opinions model was used to understand the lifestyles of wellness center clients. Data were collected from clients of five wellness centers. Regression results indicate that overworked individuals and those seeking a balance between work and family life would be the most loyal to wellness centers. Managerial implications of results are discussed.

  3. Well purge and sample apparatus and method

    Science.gov (United States)

    Schalla, Ronald; Smith, Ronald M.; Hall, Stephen H.; Smart, John E.; Gustafson, Gregg S.

    1995-01-01

    The present invention specifically permits purging and/or sampling of a well but only removing, at most, about 25% of the fluid volume compared to conventional methods and, at a minimum, removing none of the fluid volume from the well. The invention is an isolation assembly with a packer, pump and exhaust, that is inserted into the well. The isolation assembly is designed so that only a volume of fluid between the outside diameter of the isolation assembly and the inside diameter of the well over a fluid column height from the bottom of the well to the top of the active portion (lower annulus) is removed. The packer is positioned above the active portion thereby sealing the well and preventing any mixing or contamination of inlet fluid with fluid above the packer. Ports in the wall of the isolation assembly permit purging and sampling of the lower annulus along the height of the active portion.

  4. Evolving definitions of mental illness and wellness.

    Science.gov (United States)

    Manderscheid, Ronald W; Ryff, Carol D; Freeman, Elsie J; McKnight-Eily, Lela R; Dhingra, Satvinder; Strine, Tara W

    2010-01-01

    Understanding of the definitions of wellness and illness has changed from the mid-20th century to modern times, moving from a diagnosis-focused to a person-focused definition of mental illnesses, and from an "absence of disease" model to one that stresses positive psychological function for mental health. Currently, wellness refers to the degree to which one feels positive and enthusiastic about oneself and life, whereas illness refers to the presence of disease. These definitions apply to physical as well as mental illness and wellness. In this article, we build on the essential concepts of wellness and illness, discuss how these definitions have changed over time, and discuss their importance in the context of health reform and health care reform. Health reform refers to efforts focused on health, such as health promotion and the development of positive well-being. Health care reform refers to efforts focused on illness, such as treatment of disease and related rehabilitation efforts.

  5. Feasibility of EGS Well Control Systems

    Energy Technology Data Exchange (ETDEWEB)

    Norann, Randy A [Perma Works LLC; Darlow, Richard [GeoTek Energy LLC

    2015-02-03

    This report covers the 8th major objective listed in Grant DE-FG36-08GO18185. This objective takes the information and experience gained from the development of 300°C well monitoring system and applies them to concepts envisioned for future geothermal well control systems supporting EGS power production. This report covers a large number of instrumentation and control system engineering issues for EGS wells while also providing a window into existing technology to address those issues.

  6. Arsenic management through well modification and simulation

    Science.gov (United States)

    Halford, Keith J.; Stamos, Christina L.; Nishikawa, Tracy; Martin, Peter

    2010-01-01

    Arsenic concentrations can be managed with a relatively simple strategy of grouting instead of completely destroying a selected interval of well. The strategy of selective grouting was investigated in Antelope Valley, California, where groundwater supplies most of the water demand. Naturally occurring arsenic typically exceeds concentrations of 10 (mu or u)g/L in the water produced from these long-screened wells. The vertical distributions of arsenic concentrations in intervals of the aquifer contributing water to selected supply wells were characterized with depth-dependent water-quality sampling and flow logs. Arsenic primarily entered the lower half of the wells where lacustrine clay deposits and a deeper aquifer occurred. Five wells were modified by grouting from below the top of the lacustrine clay deposits to the bottom of the well, which reduced produced arsenic concentrations to less than 2 (mu or u)g/L in four of the five wells. Long-term viability of well modification and reduction of specific capacity was assessed for well 4-54 with AnalyzeHOLE, which creates and uses axisymmetric, radial MODFLOW models. Two radial models were calibrated to observed borehole flows, drawdowns, and transmissivity by estimating hydraulicconductivity values in the aquifer system and gravel packs of the original and modified wells. Lithology also constrained hydraulic-conductivity estimates as regularization observations. Well encrustations caused as much as 2 (mu or u)g/L increase in simulated arsenic concentration by reducing the contribution of flow from the aquifer system above the lacustrine clay deposits. Simulated arsenic concentrations in the modified well remained less than 3 (mu or u)g/L over a 20-year period.

  7. Hydrocarbons associated with brines from geopressured wells

    Energy Technology Data Exchange (ETDEWEB)

    1991-07-15

    The purpose of this research is to determine the concentration of the cryocondensates in fluids of the various USDOE Geopressured wells as a function of production volume. The wells are visited each month that they are operating and samples are to be taken cryogenically during each visit. A gas scrubbing system will continuously samples the gas streams of the wells in the intervals between visit. Collectors, exchanged daily by site personnel, are retrieved on each visit.

  8. Physician wellness: a missing quality indicator.

    Science.gov (United States)

    Wallace, Jean E; Lemaire, Jane B; Ghali, William A

    2009-11-14

    When physicians are unwell, the performance of health-care systems can be suboptimum. Physician wellness might not only benefit the individual physician, it could also be vital to the delivery of high-quality health care. We review the work stresses faced by physicians, the barriers to attending to wellness, and the consequences of unwell physicians to the individual and to health-care systems. We show that health systems should routinely measure physician wellness, and discuss the challenges associated with implementation.

  9. Producing oil wells; A steep downhill road

    Energy Technology Data Exchange (ETDEWEB)

    1990-02-01

    This paper discusses the effects of the drilling collapse of the past few years. Even with improved and relatively stable pricing, the severely impeded drilling climate-coupled with the continued decline of marginal wells-has caused a drop of 3.2{percent} in the total number of producing oil wells. Based on an annual survey of state and regional petroleum agencies, World Oil estimates that 603,365 oil wells are currently producing in the United States.

  10. Sexual well-being and physical disability

    OpenAIRE

    Lee, S.; Fenge, Lee-Ann

    2016-01-01

    The meaning of sexual well-being for physically disabled people is a little researched area of social work practice. The traditionally hidden nature of sexuality and sexual well-being in disability research means that practitioners have little evidence based guidance to help offer inclusive person-centred care. Because sexual well-being is a sensitive topic, and one which professionals can feel uncomfortable discussing, the absence of guidance reinforces the barriers to its inclusion in pract...

  11. Current-Enhanced Quantum Well Solar Cells

    Institute of Scientific and Technical Information of China (English)

    LOU Chao-Gang; SUN Qiang; XU Jun; ZHANG Xiao-Bing; LEI Wei; WANG Bao-Ping; CHEN Wen-Jun; QIAO Zai-Xiang

    2006-01-01

    We present the experimental results that demonstrate the enhancement of the short-circuit current of quantum well solar cells. The spectral response shows that the introduction of quantum wells extends the absorption spectrum of solar cells. The current densities under different truncated spectrums significantly increase, showing that quantum well solar cells are suitable to be the middle cells of GaInP/GaAs/Ge triple-junction solar cells to increase their overall conversion efficiency.

  12. Predictors of Wellness and American Indians

    OpenAIRE

    Hodge, Felicia S.; Nandy, Karabi

    2011-01-01

    Wellness is an important American Indian (AI) concept, understood as being in balance with one’s body, mind, and environment. Wellness predictors are reported in this paper within the context of health. A cross-sectional randomized household survey of 457 AI adults at 13 rural health care sites in California was conducted. Measures included wellness perceptions, barriers, health status/health conditions, spirituality, cultural connectivity, high-risk behaviors and abuse history. Statistical a...

  13. Ethylene oxidation in a well-stirred reactor

    Energy Technology Data Exchange (ETDEWEB)

    Marinov, N.M. [Lawrence Livermore National Lab., CA (United States); Malte, P.C. [Washington Univ., Seattle, WA (United States). Dept. of Mechanical Engineering

    1994-10-01

    The detailed ethylene oxidation data set of Thornton, obtained for a well-stirred reactor operated fuel-lean at atmospheric pressure and for temperatures of 1003K to 1253K, is used as a basis for the comparison of chemical kinetic mechanisms reported in the literature and for the development of a new ethylene oxidation mechanism. The mechanisms examined are those of Westbrook and Pitz and Dagaut et al. These mechanisms indicated that unusually large rates for the vinyl decomposition reaction are required to obtain agreement with the Thornton data set. A new ethylene oxidation mechanism is developed in order to overcome some of the drawbacks of the previous mechanisms. The new mechanism closely simulates the overall rate of loss of ethylene, and the concentation of CO, CO{sub 2}, H{sub 2}, CH{sub 2}O, C{sub 2}H{sub 2}, CH{sub 3}OH, CH{sub 4}, and C{sub 2}H{sub 6} measured for the stirred reactor. Predictions by this mechanism are dependent on a new high temperature vinyl oxidation route, C{sub 2}H{sub 3} + O{sub 2} = CH{sub 2}CHO + O with a k{sub C2H3+O2=CH2CHO+O}/k{sub C2H3+O2=CH2O+HCO} branching ratio of 1.20 at 1053K to 2.05 at 1253K. The branching ratio values were dependent upon the extent of fall-off for the C{sub 2}H{sub 3} + O{sub 2} = CH{sub 2}O + HCO reaction.

  14. The quantum spectra analysis of the circular billiards in wells

    Institute of Scientific and Technical Information of China (English)

    Zhang Yan-Hui; Zhang Li-Qin; Xu Xue-You; Ge Mei-Hua; Lin Sheng-Lu; Du Meng-Li

    2006-01-01

    We use a recently defined quantum spectral function and apply the method of closed-orbit theory to the 2D circular billiard system. The quantum spectra contain rich information of all classical orbits connecting two arbitrary points in the well. We study the correspondence between quantum spectra and classical orbits in the circular, 1/2 circular and 1/4 circular wells using the analytic and numerical methods. We find that the peak positions in the Fourier-transformed quantum spectra match accurately with the lengths of the classical orbits. These examples show evidently that semi-classical method provides a bridge between quantum and classical mechanics.

  15. Sand control systems used in completing wells

    Directory of Open Access Journals (Sweden)

    Gabriel Wittenberger

    2005-12-01

    Full Text Available Expandable Tubular Technology is transforming the face of well completion and construction. This technology provides: a substantially higher hydrocarbon production rates from the reservoir, a reduced well drilling and construction costs, new possibilities for previously unreachable or uneconomic reservoirs, and step a change towards the single diameter well. ESS (Expandable Sand Screen has an unrivalled performance worldwide for delivering a reliable sand control in a wide range of applications. Well costs typically cut by over 20 %, and the productivity increases up to 70 %.

  16. Characterization Well R-22 Geochemistry Report

    Energy Technology Data Exchange (ETDEWEB)

    Patrick Longmire

    2002-09-01

    This report provides analytical results for groundwater collected during four characterization-sampling rounds conducted at well R-22 from March 2001 through March 2002. Characterization well R-22 was sampled from March 6 through 13, 2001; June 19 through 26, 2001; November 30 through December 10, 2001; and February 27 through March 7, 2002. The goal of the characterization efforts was to assess the hydrochemistry and to determine whether or not contaminants are present in the regional aquifer in the vicinity of the well. A geochemical evaluation of the analytical results for the well is also presented in this report.

  17. Pyroelectric Quantum Well Energy Harvesters Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose the investigation of pyroelectric energy harvesters with enhanced efficiencies through quantum wells induced by a multilayer design.  Pyroelectric...

  18. Economic Shocks and Subjective Well-being

    DEFF Research Database (Denmark)

    Hariri, Jacob Gerner; Bjørnskov, Christian; Justesen, Mogens Kamp

    -treatment respondents, surveyed after the devaluation. Our estimates show that the devaluation had a large and significantly negative effect on individuals’ evaluations of subjective well-being. These results suggest that macroeconomic shocks, such as unanticipated currency devaluations, may have significant short......This paper examines how economic shocks affect individual well-being in developing countries. Using the case of a sudden and unanticipated currency devaluation in Botswana as a quasi-experiment, we examine how this monetary shock affects individuals’ evaluations of well-being. We do so by using......-term costs in the form of reductions in people’s sense of well-being....

  19. CEMENT SLURRIES FOR GEOTHERMAL WELLS CEMENTING

    Directory of Open Access Journals (Sweden)

    Nediljka Gaurina-Međimurec

    1994-12-01

    Full Text Available During a well cementing special place belongs to the cement slurry design. To ensure the best quality of cementing, a thorough understanding of well parameters is essential, as well as behaviour of cement slurry (especially at high temperatures and application of proven cementing techniques. Many cement jobs fail because of bad job planning. Well cementing without regarding what should be accomplished, can lead to well problems (channels in the cement, unwanted water, gas or fluid production, pipe corrosion and expensive well repairs. Cementing temperature conditions are important because bot-tomhole circulating temperatures affect slurry thickening time, arheology, set time and compressive strength development. Knowing the actual temperature which cement encounters during placement allows the selection of proper cementing materials for a specific application. Slurry design is affected by well depth, bottom hole circulating temperature and static temperature, type or drilling fluid, slurry density, pumping time, quality of mix water, fluid loss control, flow regime, settling and free water, quality of cement, dry or liquid additives, strength development, and quality of the lab cement testing and equipment. Most Portland cements and Class J cement have shown suitable performances in geot-hermal wells. Cement system designs for geothermal wells differ from those for conventional high temperature oil and gas wells in the exclusive use of silica flour instead of silica sand, and the avoidance of fly ash as an extender. In this paper, Portland cement behaviour at high temperatures is described. Cement slurry and set cement properties are also described. Published in literature, the composition of cement slurries which were tested in geothermal conditions and which obtained required compressive strength and water permeability are listed. As a case of our practice geothermal wells Velika Ciglena-1 and Velika Ciglena-la are described.

  20. New Achievements in Well Logging Technology

    Institute of Scientific and Technical Information of China (English)

    Tan Tingdong

    1996-01-01

    @@ In the first five years of 1990s, new achievements made in China's onshore well logging technology have enhanced the benefits of exploration and development for complex oil and gas reservoirs and have thus showed the trend of the development of China's well logging technology towards the end of this century.

  1. Doing Gender Well and Differently in Management

    Institute of Scientific and Technical Information of China (English)

    于英

    2014-01-01

    The purpose of this paper is to revisit theoretical positions on gender and the implications for gender in management by building upon current research on doing gender well and re-doing or undoing gender and argue that gender can be done well and differently through simultaneous, multiple enactments of femininity and masculinity.

  2. The Anatomy of Subjective Well-being

    NARCIS (Netherlands)

    Praag, van B.M.S.; Frijters, P.; Ferrer-i-Carbonell, A.

    2002-01-01

    This paper contributes to the literature on Subjective Well-Being by taking into account different aspects of life, called domains, such as health, financial situation, job, leisure, housing, and environment. We postulate a two-Iayer model where individual total Subjective Well-Being depends on the

  3. Well-covered graphs and factors

    DEFF Research Database (Denmark)

    Randerath, Bert; Vestergaard, Preben D.

    2006-01-01

    A maximum independent set of vertices in a graph is a set of pairwise nonadjacent vertices of largest cardinality α. Plummer defined a graph to be well-covered, if every independent set is contained in a maximum independent set of G. Every well-covered graph G without isolated vertices has a perf...

  4. Studying employee well-being : Moving forward

    NARCIS (Netherlands)

    Ilies, R.; Pluut, Helen; Aw, S.S.Y.

    2015-01-01

    In this article, we attempt to integrate the commentaries to our position paper on intra-individual models of employee well-being (EWB; Ilies, R., Aw, S. S. Y., & Pluut, H. (2015). Intraindividual models of employee well-being: What have we learned and where do we go from here? European Journal of

  5. Social Goals and Well-Being

    Science.gov (United States)

    King, Ronnel B.

    2017-01-01

    Students have various social reasons for doing well in school (social-academic goals). However, most studies have focused on competence-oriented achievement goals with little attention paid to social-academic goals. This study aims to examine the role of social-academic goals in students' general well-being (Study 1) and socioemotional functioning…

  6. Research on Preventive Wellness in the Netherlands

    NARCIS (Netherlands)

    dr. Angelique Lombarts; Jacques Vork

    2013-01-01

    Chapter 39 in Health, Tourism and Hospitality: Spas, Wellness and Medical Travel, 2nd Edition takes an in-depth and comprehensive look at the growing health, wellness and medical tourism sectors in a global context. The book analyses the history and development of the industries, the way in which

  7. Health Promotion and Wellness Staffing Methods

    Science.gov (United States)

    1999-06-01

    alone, nutrition intervention revealed an average saving of $4,075 per case annually (ADA, 1995; 1993). A summary of 32 literature reviews of wellness...commanders (L. Rowbotham, Chief, Nutrition Intervention & Wellness Branch, e-mail correspondence, April 1999). To implement this new concept, the providers and

  8. Well-Founded Belief and Perceptual Justification

    DEFF Research Database (Denmark)

    Broncano-Berrocal, Fernando

    2016-01-01

    According to Alan Millar, justified beliefs are well-founded beliefs. Millar cashes out the notion of well-foundedness in terms of having an adequate reason to believe something and believing it for that reason. To make his account of justified belief compatible with perceptual justification he a...

  9. Psychopolitical Literacy for Wellness and Justice

    Science.gov (United States)

    Prilleltensky, Isaac; Fox, Dennis R.

    2007-01-01

    Wellness and justice have attracted recent attention in psychology. Both within our discipline and within society at large, more needs to be done to elucidate the link between the two while taking into account the role of power and context. We suggest that wellness is achieved by the balanced and synergistic satisfaction of personal, relational,…

  10. Research on Preventive Wellness in the Netherlands

    NARCIS (Netherlands)

    Lombarts, Angelique; Vork, Jacques

    2013-01-01

    Chapter 39 in Health, Tourism and Hospitality: Spas, Wellness and Medical Travel, 2nd Edition takes an in-depth and comprehensive look at the growing health, wellness and medical tourism sectors in a global context. The book analyses the history and development of the industries, the way in which th

  11. ESSA's Well-Rounded Education. Special Report

    Science.gov (United States)

    Jones, Scott D.; Workman, Emily

    2016-01-01

    As questions regarding the Every Student Succeeds Act (ESSA) flow in to Education Commission of the States, one frequent inquiry is about the concept of a "well-rounded education," referenced more than 20 times and included within the majority of Titles in the Act. State education leaders want to know what constitutes a well-rounded…

  12. Statistical mechanics

    CERN Document Server

    Jana, Madhusudan

    2015-01-01

    Statistical mechanics is self sufficient, written in a lucid manner, keeping in mind the exam system of the universities. Need of study this subject and its relation to Thermodynamics is discussed in detail. Starting from Liouville theorem gradually, the Statistical Mechanics is developed thoroughly. All three types of Statistical distribution functions are derived separately with their periphery of applications and limitations. Non-interacting ideal Bose gas and Fermi gas are discussed thoroughly. Properties of Liquid He-II and the corresponding models have been depicted. White dwarfs and condensed matter physics, transport phenomenon - thermal and electrical conductivity, Hall effect, Magneto resistance, viscosity, diffusion, etc. are discussed. Basic understanding of Ising model is given to explain the phase transition. The book ends with a detailed coverage to the method of ensembles (namely Microcanonical, canonical and grand canonical) and their applications. Various numerical and conceptual problems ar...

  13. Residential mobility, well-being, and mortality.

    Science.gov (United States)

    Oishi, Shigehiro; Schimmack, Ulrich

    2010-06-01

    We tested the relation between residential mobility and well-being in a sample of 7,108 American adults who were followed for 10 years. The more residential moves participants had experienced as children, the lower the levels of well-being as adults. As predicted, however, the negative association between the number of residential moves and well-being was observed among introverts but not among extraverts. We further demonstrated that the negative association between residential mobility and well-being among introverts was explained by the relative lack of close social relationships. Finally, we found that introverts who had moved frequently as children were more likely to have died during the 10-year follow-up. Among extraverts, childhood residential mobility was unrelated to their mortality risk as adults. These findings indicate that residential moves can be a risk factor for introverts and that extraversion can be an interpersonal resource for social relationships and well-being in mobile societies.

  14. Work-related well-being

    Directory of Open Access Journals (Sweden)

    Melinda Soh

    2016-02-01

    Full Text Available This study aimed to investigate the different dimensions of well-being (namely, work engagement, job satisfaction, and psychological stress and possible predictors such as personality and perceived organizational support. A cross-sectional survey design was used, with a sample of 490 ambulance personnel in the United Kingdom. Significant correlations were found between the dimensions of job satisfaction, engagement, and stress. The results also supported a hierarchical model with job satisfaction, stress, and engagement loading onto one higher order factor of work well-being. Emotional stability and perceived organizational support were identified as significant predictors of well-being. The findings suggest the importance of measuring the work-related well-being of ambulance personnel holistically and present perceived organizational support as a possible area for interventions to improve well-being.

  15. Well-plate freeze-drying

    DEFF Research Database (Denmark)

    Trnka, Hjalte; Rantanen, Jukka; Grohganz, Holger

    2015-01-01

    due to increasing amount of amorphous matter in the samples was observed in both vials and well plates. Cake collapse was found to be representative in well plates and could be effectively quantified using image analysis. Reconstitution time was also found to be equal in all three platforms. Finally......Abstract Context: Freeze-drying in presence of excipients is a common practice to stabilize biomacromolecular formulations. The composition of this formulation is known to affect the quality of the final product. Objective: The aim of this study was to evaluate freeze-drying in well-plates...... as a high throughput platform for formulation screening of freeze-dried products. Methods: Model formulations consisting of mannitol, sucrose and bovine serum albumin were freeze-dried in brass well plates, plastic well plates and vials. Physical properties investigated were solid form, residual moisture...

  16. Well-faring Towards Uncertain Futures:

    DEFF Research Database (Denmark)

    Højlund, Susanne; Meinert, Lotte; Frederiksen, Martin Demant;

    2011-01-01

    The article explores how societal contexts create different possibilities for faring well towards the future for young marginalized people. Based on a comparative project including ethnographies from Brazil, Uganda, Georgia and Denmark the authors discuss well-faring as a time-oriented process...... based on individual as well as societal conditions. The article argues that in order to understand well-faring it is important to analyse how visions and strategies for the future are shaped in relation to local circumstances. Whether it is possible to envision the future as hopeless or hopeful......, as concrete or abstract or as dependent on family or state is a ma er of context. Well-faring is thus neither an individual nor a state project but must be analysed in a double perspective as an interplay between the two....

  17. Psychological wellness constructs: relationships and group differences

    Directory of Open Access Journals (Sweden)

    Liezl Gropp

    2007-03-01

    Full Text Available The objective of the study was to examine the relationships between several constructs that were hypothesised to be components underlying psychological wellness and to establish whether there were differences between managerial and non-managerial groups or between Black and White groups in respect of the wellness variables. The Personal Orientation Inventory (POI, Locus of Control Inventory (LOC, Sense of Coherence Scale (SOC, and the Bar-On EQ-I were administered to a random sample of 200 employees of a financial services company. Statistically significant differences were found between the groups on several of the wellness variables with the manager and White groups obtaining higher scores on these variables than their comparison groups. However, in respect of External Locus of Control, the non-manager and Black groups obtained the higher scores. Factor analytic results demonstrated that the wellness variables clustered in two correlated factors (r = 0,43 labeled psychological wellness and self-actualisation.

  18. Mechanical engineering

    CERN Document Server

    Darbyshire, Alan

    2010-01-01

    Alan Darbyshire's best-selling text book provides five-star high quality content to a potential audience of 13,000 engineering students. It explains the most popular specialist units of the Mechanical Engineering, Manufacturing Engineering and Operations & Maintenance Engineering pathways of the new 2010 BTEC National Engineering syllabus. This challenging textbook also features contributions from specialist lecturers, ensuring that no stone is left unturned.

  19. The Antikythera mechanism and the mechanical universe

    Science.gov (United States)

    Edmunds, M. G.

    2014-10-01

    How did our view of the Universe develop? By the mid-eighteenth century, a world view had developed of a system constrained by physical laws. These laws, if not entirely understood, showed regularity and could be handled mathematically to provide both explanation and prediction of celestial phenomena. Most of us have at least some hazy idea of the fundamental shift that came through the work of Copernicus, Kepler, Galileo and Newton. The idea of a 'Mechanical Universe' running rather like a clock tends to be associated with these sixteenth- and seventeenth-century pioneers. It remains a useful - and perhaps comforting - analogy. Yet, recent investigations based around the Antikythera Mechanism, an artefact from ancient Greece, reinforce a view that the 'Mechanical' conception has been around for a much longer time - indeed certainly as far back as the third century BC. The extent of mechanical design expertise existing around 100 BC as witnessed by the Antikythera Mechanism comes as a great surprise to most people. It is certainly a very ingenious device, often referred to as 'The World's First Computer' although it is really a sophisticated mechanical astronomical calculator with its functions pre-determined rather than programmable. In this review, the structure and functions of the Antikythera Mechanism are described. The astronomy, cosmology and technology inherent in the machine fit surprisingly well into the context of its contemporary Classical world. A strong claim will be made for the influence of such mechanisms on the development of astronomical and philosophical views, based on literary reference. There is evidence that the technology persisted until its spectacular and rather sudden re-appearance in Western Europe around 1300 AD. From then on it is not hard to chart a path through the astronomical clocks of the sixteenth century to Kepler's aim (expressed in a 1605 letter) to 'show that the heavenly machine is not a kind of divine, live being, but a

  20. Elementary Quantum Mechanics

    CERN Document Server

    Rosu, H C

    2000-01-01

    This is the first graduate course on elementary quantum mechanics in Internet written in Romanian for the benefit of Romanian speaking students (Romania and Moldova). It is a translation (with corrections) of the Spanish version of the course (physics/9808031, English translation is under consideration), which I did at the request of students of physics in Bucharest. The topics included refer to the postulates of quantum mechanics, one-dimensional barriers and wells, angular momentum and spin, WKB method, harmonic oscillator, hydrogen atom, quantum scattering, and partial waves

  1. Classical mechanics with Maxima

    CERN Document Server

    Timberlake, Todd Keene

    2016-01-01

    This book guides undergraduate students in the use of Maxima—a computer algebra system—in solving problems in classical mechanics. It functions well as a supplement to a typical classical mechanics textbook. When it comes to problems that are too difficult to solve by hand, computer algebra systems that can perform symbolic mathematical manipulations are a valuable tool. Maxima is particularly attractive in that it is open-source, multiple-platform software that students can download and install free of charge. Lessons learned and capabilities developed using Maxima are easily transferred to other, proprietary software.

  2. Mechanism of artificial heart

    CERN Document Server

    Yamane, Takashi

    2016-01-01

    This book first describes medical devices in relation to regenerative medicine before turning to a more specific topic: artificial heart technologies. Not only the pump mechanisms but also the bearing, motor mechanisms, and materials are described, including expert information. Design methods are described to enhance hemocompatibility: main concerns are reduction of blood cell damage and protein break, as well as prevention of blood clotting. Regulatory science from R&D to clinical trials is also discussed to verify the safety and efficacy of the devices.

  3. Mechanical graphene

    Science.gov (United States)

    Socolar, Joshua E. S.; Lubensky, Tom C.; Kane, Charles L.

    2017-02-01

    We present a model of a mechanical system with a vibrational mode spectrum identical to the spectrum of electronic excitations in a tight-binding model of graphene. The model consists of point masses connected by elastic couplings, called ‘tri-bonds’, that implement certain three-body interactions, which can be tuned by varying parameters that correspond to the relative hopping amplitudes on the different bond directions in graphene. In the mechanical model, this is accomplished by varying the location of a pivot point that determines the allowed rigid rotations of a single tri-bond. The infinite system constitutes a Maxwell lattice, with the number of degrees of freedom equal to the number of constraints imposed by the tri-bonds. We construct the equilibrium and compatibility matrices and analyze the model’s phase diagram, which includes spectra with Weyl points for some placements of the pivot and topologically polarized phases for others. We then discuss the edge modes and associated states of self stress for strips cut from the periodic lattice. Finally, we suggest a physical realization of the tri-bond, which allows access to parameter regimes not available to experiments on (strained) graphene and may be used to create other two-dimensional mechanical metamaterials with different spectral features.

  4. Advanced Technologies For Stripper Gas Well Enhancement

    Energy Technology Data Exchange (ETDEWEB)

    Ronald J. MacDonald; Charles M. Boyer; Joseph H. Frantz Jr; Paul A. Zyglowicz

    2005-04-01

    Stripper gas and oil well operators frequently face a dilemma regarding maximizing production from low-productivity wells. With thousands of stripper wells in the United States covering extensive acreage, it is difficult to identify easily and efficiently marginal or underperforming wells. In addition, the magnitude of reviewing vast amounts of data places a strain on an operator's work force and financial resources. Schlumberger DCS, in cooperation with the National Energy Technology Laboratory (NETL) and the U.S. Department of Energy (DOE), has created software and developed in-house analysis methods to identify remediation potential in stripper wells relatively easily. This software is referred to as Stripper Well Analysis Remediation Methodology (SWARM). SWARM was beta-tested with data pertaining to two gas fields located in northwestern Pennsylvania and had notable results. Great Lakes Energy Partners, LLC (Great Lakes) and Belden & Blake Corporation (B&B) both operate wells in the first field studied. They provided data for 729 wells, and we estimated that 41 wells were candidates for remediation. However, for reasons unbeknownst to Schlumberger these wells were not budgeted for rework by the operators. The second field (Cooperstown) is located in Crawford, Venango, and Warren counties, Pa and has more than 2,200 wells operated by Great Lakes. This paper discusses in depth the successful results of a candidate recognition study of this area. We compared each well's historical production with that of its offsets and identified 339 underperformers before considering remediation costs, and 168 economically viable candidates based on restimulation costs of $50,000 per well. From this data, we prioritized a list based on the expected incremental recoverable gas and 10% discounted net present value (NPV). For this study, we calculated the incremental gas by subtracting the volumes forecasted after remediation from the production projected at its current

  5. Design and Analysis of a Quantum Well Light Emitting Triode.

    Science.gov (United States)

    Rajagopalan, Bharath

    1992-01-01

    We present, for the first time, the design and analysis of a novel, quantum well light emitting triode (QWLET), based on a bipolar junction transistor with a quantum well in the base. Modulation of the collector -base voltage controls the radiation emission from the quantum well by sweeping the space-charge region across the well. Detailed analysis is provided for an npn-Al_{.35 }Ga_{.65}As transistor with an undoped GaAs quantum well. Calculations indicate that modulation rates in excess of 1 GHz are possible. The switching-off process is limited by thermionic emission of majority carriers out of the well, whereas the turn -on is controlled by the recombination lifetime in the well. Our calculations reveal that the thermionic emission lifetime of these carriers is ~0.1 ns at an applied field of 5 times 10 ^4 V/cm, while the radiative lifetime is approximately 1-2 ns for carrier densities in excess of 10^{12} cm ^{-2} in the well. For material systems, or choice of parameters, where thermionic emission is insignificant, field induced tunneling of carriers out of the well is considered as a quenching mechanism. However, the tunneling lifetime is ~3.1 mus at a field of 1 times 10^5 V/cm, and therefore we propose a novel scheme to reduce this lifetime to ~3.3 ns through impurity assisted tunneling. Our calculated results also include a capture cross-section of 10^{-14} cm ^2 for carriers into the well, a B coefficient for radiative recombination of 2.4 times 10^{-10} cm ^3/s, and optical power generation of 0.15 muW per μm of length per mA of drive current and peaked at 855 nm. The voltage amplitude needed to modulate the radiation is on the order of 1 to 2 volts.

  6. Well test analysis in fractured media

    Energy Technology Data Exchange (ETDEWEB)

    Karasaki, K.

    1987-04-01

    The behavior of fracture systems under well test conditions and methods for analyzing well test data from fractured media are investigated. Several analytical models are developed to be used for analyzing well test data from fractured media. Numerical tools that may be used to simulate fluid flow in fractured media are also presented. Three types of composite models for constant flux tests are investigated. These models are based on the assumption that a fracture system under well test conditions may be represented by two concentric regions, one representing a small number of fractures that dominates flow near the well, and the other representing average conditions farther away from the well. Type curves are presented that can be used to find the flow parameters of these two regions and the extent of the inner concentric region. Several slug test models with different geometric conditions that may be present in fractured media are also investigated. A finite element model that can simulate transient fluid flow in fracture networks is used to study the behavior of various two-dimensional fracture systems under well test conditions. A mesh generator that can be used to model mass and heat flow in a fractured-porous media is presented.

  7. Well-being, capabilities and philosophical practice

    Directory of Open Access Journals (Sweden)

    Bulatović Aleksandra

    2014-01-01

    Full Text Available The concept of well being has become the main criterion to assess quality of life in contemporary society. Individual well-being describes the individual quality of life, while social well-being refers to quality of life in a society. Given that well-being has a multitude of dimensions, a unique definition of it is elusive to scholars. In this article social well-being is conceptualised as a dynamic process within the context set by social integration as one’s relationship to society and the community. This includes the quality of interaction between the individual and society and one’s ‘social actualisation’ understood as the realisation of one’s social capacities. Social actualisation also involves one’s ability to influence social processes and to benefit from social cohesion, which consists, in any society, of the quality, organisation and functioning of the social world. Hence the ability to impact society is an integral part of individual well being. This paper suggests that philosophical practice as a new paradigm in the humanities holds out promise for the improvement of both individual and social well-being. [Projekat Ministarstva nauke Republike Srbije, br. 47011: Crime in Serbia: Phenomenology, Risks and Possibilities for Social Intervention

  8. Magnetoluminescence characterization of quantum well structures

    Energy Technology Data Exchange (ETDEWEB)

    Jones, E.D.; Kurtz, S.R.

    1995-03-01

    Three applications of magnetic field effects upon the photoluminescence spectrum which provide unique information about semiconductor quantum well structures are presented. The first example shows data which provide a quantitative measure of both the conduction and valence-band the energy dispersion curves for an InGaAs/GaAs single-strained-quantum well and a GaAs/AlGaAs lattice-matched single quantum well. The second subject discusses magnetoluminescence data which provides a clear demonstration for the existence of spectral shifts related to ionized-impurity scattering and the third study involves infrared magnetoluminescence measurements on narrow bandgap semiconductor alloys and heterostructures.

  9. Reasons for using workplace wellness services

    DEFF Research Database (Denmark)

    Persson, Roger; Cleal, Bryan; Jakobsen, Mette Øllgaard

    2017-01-01

    the service at least three times (frequent users). Two items assessed the frequency of statements of justifications for using or not using the Wellness service. Associations between 32 demographic and psychosocial variables and use of the Wellness service were evaluated with unadjusted bivariate logistic......%). Of the 32 demographical and psychosocial variables included, 28 were associated with any use and 24 with frequent use. CONCLUSIONS: Use of the Wellness service appears to be driven by a complex configuration of factors that resist easy translation into practical advice. Non-participation was accounted...

  10. The nucleolus is well-posed

    Science.gov (United States)

    Fragnelli, Vito; Patrone, Fioravante; Torre, Anna

    2006-02-01

    The lexicographic order is not representable by a real-valued function, contrary to many other orders or preorders. So, standard tools and results for well-posed minimum problems cannot be used. We prove that under suitable hypotheses it is however possible to guarantee the well-posedness of a lexicographic minimum over a compact or convex set. This result allows us to prove that some game theoretical solution concepts, based on lexicographic order are well-posed: in particular, this is true for the nucleolus.

  11. Subsea building blocks for slender wells

    Energy Technology Data Exchange (ETDEWEB)

    Sabedotti, Sergio

    2010-07-01

    Reduce the Life Cycle Cost (LCC), IOR and improve HSE are fundamental aspects in future subsea field developments. The SBB (Subsea Building Blocks) is an R D effort from Statoil and Aker Solutions to investigate and develop new technology that can allow the industry to achieve these objectives. One important aspect of this initiative is well construction and reduced rig time for drilling, completion and intervention of subsea wells. To enable a slender system and increase the operational flexibility, well equipment (WH, XMT) has been analyzed and redesigned. (Author)

  12. Economic Shocks and Subjective Well-Being

    DEFF Research Database (Denmark)

    Hariri, Jacob Gerner; Bjørnskov, Christian; Justesen, Mogens Kamp

    This paper examines how economic shocks affect individual well-being in developing countries. Using the case of a sudden and unanticipated currency devaluation in Botswana as a quasi-experiment, we examine how this monetary shock affects individuals’ evaluations of well-being. We do so by using......-treatment respondents, surveyed after the devaluation. Our estimates show that the devaluation had a large and significantly negative effect on individuals’ evaluations of subjective well-being. These results suggest that macroeconomic shocks, such as unanticipated currency devaluations, may have significant short...

  13. Well Logging Equipment Updated in China

    Institute of Scientific and Technical Information of China (English)

    Xu Lili

    1996-01-01

    @@ As one of the ten principal disciplines in the petroleum industry, well logging has been developed for about 55years in China and is playing an increasingly important role in the country's oil and gas exploration and development.

  14. Personality dimensions and subjective well-being.

    Science.gov (United States)

    Chico Librán, Eliseo

    2006-05-01

    This work examines the association between personality dimensions (extraversion and neuroticism) and subjective well-being. Subjective well-being is associated both with extraversion and neuroticism, and currently, neuroticism is generally considered the more important. A total of 368 students from the University of Rovira i Virgili completed the Extraversion and Neuroticism subscales of the revised Eysenck Personality Questionnaire (Eysenck, Eysenck, and Barrett, 1985), the Satisfaction with Life Scale (SWLS; Diener, Emmons, Larsen, and Griffin, 1985), and the Positive and Negative Affect Scale (Watson, Clark, and Tellegen, 1988). Regression analyses revealed the personality variable of neuroticism as one of the most important correlates of subjective well-being. Regression analyses also showed that 44% of the variance of subjective well-being was accounted for by neuroticism, whereas extraversion only explained 8% of the variance.

  15. Detonator assembly for oil well perforating gun

    Energy Technology Data Exchange (ETDEWEB)

    Regalbuto, J.A.

    1981-02-18

    A safe/arm detonator assembly for use with an oil well perforating gun assembly has 2 housing members isolated from well-bore fluid which are rotatable from a safe position wherein a detonator and a booster are held out of alignment, to an armed position wherein the detonator and booster are moved into alignment. The detonator assembly is further arranged to be installed in a well perforating gun assembly such that the gun assembly may be transported with the detonator assembly in the safe position, and rotated to the armed position at the well site without disassembling the gun assembly. A safety pin may protrude from one of the housing members across a cavity between the members to cover and protect the booster from accidental detonation when the detonator assembly is in the safe position. The detonator and booster cavities may be held aligned by a detent ball. 16 claims.

  16. Age and occupational well-being.

    Science.gov (United States)

    Warr, P

    1992-03-01

    Two questions are examined through an investigation of 1,686 people employed in a wide range of jobs. First, is there a U-shaped relationship between age and occupational well-being, such that medium-aged workers report lower well-being than do both younger and older people? That pattern is found, in relationship to both job anxiety-contentment and job depression-enthusiasm. Second, can the observed associations between age and well-being be accounted for by 13 potentially explanatory factors, covering job position, job characteristics, work values, demographic factors, and family life cycle? After introducing these variables into stepwise regression equations, age remains significantly predictive of job well-being. Possible additional explanations of this positive association include other characteristics, an increasingly retrospective focus, and nonoccupational experiences.

  17. Living Well with Sickle Cell Disease

    Science.gov (United States)

    ... Information For... Media Policy Makers Living Well with Sickle Cell Disease Language: English Español (Spanish) Recommend on Facebook Tweet Share Compartir People with sickle cell disease can live full lives and enjoy most of ...

  18. Achievement Goals and Student Well-Being.

    Science.gov (United States)

    Kaplan; Maehr

    1999-10-01

    This study is concerned with the role that achievement goals may play in facilitating the psychological well-being of students. Specifically, we build on "goal theory" analysis of adaptive behavior in examining the relationship between task and ego goals, perceptions of school emphases on task and ego goals, and indices of well-being and disruptive behavior. Generally, task goals and perception of the school as emphasizing task goals were related to positive psychological well-being, and ego goals and perceiving the school as emphasizing ego goals were related to negative psychological well-being. This pattern was found for both African American and Euro-American students. However, path analyses pointed to possible different processes as operating for the African Americans and the Euro-Americans in the sample. Copyright 1999 Academic Press.

  19. Giardia and Drinking Water from Private Wells

    Science.gov (United States)

    ... type="submit" value="Submit" /> Healthy Water Home Giardia and Drinking Water from Private Wells Recommend on ... visit CDC's Giardia website. Where and how does Giardia get into drinking water? Millions of Giardia parasites ...

  20. RESERVOIR CHARACTERIZATION USING SEISMIC AND WELL ...

    African Journals Online (AJOL)

    Osondu

    2012-06-19

    Jun 19, 2012 ... Key words: Reservoir sand, Well log, Water saturation, Linear and Steiber. Introduction. Reservoir ... During analysis, seismic data can quantitatively predict ..... Wireline and Testing, Houston Texas, pp. 21 –. 89. Wan Qin ...

  1. MARGINAL EXPENSE OIL WELL WIRELESS SURVEILLANCE MEOWS

    Energy Technology Data Exchange (ETDEWEB)

    Mason M. Medizade; John R. Ridgely; Donald G. Nelson

    2004-11-01

    A marginal expense oil well wireless surveillance system to monitor system performance and production from rod-pumped wells in real time from wells operated by Vaquero Energy in the Edison Field, Main Area of Kern County in California has been successfully designed and field tested. The surveillance system includes a proprietary flow sensor, a programmable transmitting unit, a base receiver and receiving antenna, and a base station computer equipped with software to interpret the data. First, the system design is presented. Second, field data obtained from three wells is shown. Results of the study show that an effective, cost competitive, real-time wireless surveillance system can be introduced to oil fields across the United States and the world.

  2. DIRECTIONAL WELL TRAJECTORY DESIGN: THE THEORITICAL ...

    African Journals Online (AJOL)

    user

    2016-10-04

    Oct 4, 2016 ... economical application of both time and finance, as well as a ... pioneers to introduce mathematics into directional ..... Table : Determination of 'v' and 'm' Straight Azimuth departure course to Curved Azimuth departure course.

  3. San Bernardino National Wildlife Refuge Well 10

    Energy Technology Data Exchange (ETDEWEB)

    Ensminger, J.T.; Easterly, C.E.; Ketelle, R.H.; Quarles, H.; Wade, M.C.

    1999-12-01

    The U.S. Geological Survey (USGS), at the request of the U.S. Fish and Wildlife Service, evaluated the water production capacity of an artesian well in the San Bernardino National Wildlife Refuge, Arizona. Water from the well initially flows into a pond containing three federally threatened or endangered fish species, and water from this pond feeds an adjacent pond/wetland containing an endangered plant species.

  4. Well-Being, Science, and Philosophy

    DEFF Research Database (Denmark)

    Rodogno, Raffaele

    2014-01-01

    according to which it originates in the idea that philosophers take well-being to be a single and general concept, and argue instead that it is likely to be the result of the different theoretical constraints under which philosophy and empirical science respectively operate. Finally, I show...... that communication can be strengthened by developing the empirical articulations of philosophical theories of well-being, and sketch how to do just that....

  5. Overview - Be Smart. Be Well. STD Videos

    Centers for Disease Control (CDC) Podcasts

    2010-03-15

    This video, produced by Be Smart. Be Well., raises awareness of Sexually Transmitted Diseases (STDs): 1) What are they? 2) Why they matter? and, 3) What can I do about them? Footage courtesy of Be Smart. Be Well., featuring CDC's Dr. John Douglas, Division of Sexually Transmitted Disease Prevention.  Created: 3/15/2010 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP).   Date Released: 3/15/2010.

  6. Work and well-being in teams

    OpenAIRE

    Nielsen, Karina

    2003-01-01

    This thesis examines work and well-being in relationship to teamwork in two organisations employing professionals; one organising work in Japanese style teams and one with self-managing work teams. It offers a critique of current research on employee well-being in teams and outlines some ways forward for filling in the gaps in existing research. Using two case studies, the working conditions may be in teamwork organisations are investigated. Second, the moderating effects of teamwork on t...

  7. Psychological wellness constructs: relationships and group differences

    OpenAIRE

    Liezl Gropp; Dirk Geldenhuys; Deléne Visser

    2007-01-01

    The objective of the study was to examine the relationships between several constructs that were hypothesised to be components underlying psychological wellness and to establish whether there were differences between managerial and non-managerial groups or between Black and White groups in respect of the wellness variables. The Personal Orientation Inventory (POI), Locus of Control Inventory (LOC), Sense of Coherence Scale (SOC), and the Bar-On EQ-I were administered to a random sample of 20...

  8. Constructing a systems psychodynamic wellness model

    OpenAIRE

    Sanchen Henning; Frans Cilliers

    2012-01-01

    Orientation: The researchers constructed a Systems Psychodynamic Wellness Model (SPWM) by merging theory and concepts from systems psychodynamics and positive psychology. They then refined the model for application in organisations during a Listening Post (LP) that comprised experienced subject experts.Research purpose: The purpose of the research was to construct and refine the SPWM in order to understand psychological wellness at the individual, group and organisational levels.Motivation fo...

  9. Psychological wellness constructs: Relationships and group differences.

    OpenAIRE

    2007-01-01

    The objective of the study was to examine the relationships between several constructs that were hypothesised to be components underlying psychological wellness and to establish whether there were differences between managerial and non-managerial groups or between Black and White groups in respect of the wellness variables. The Personal Orientation Inventory (POI), Locus of Control Inventory (LOC), Sense of Coherence Scale (SOC), and the Bar-On EQ-I were administered to a random sample of 200...

  10. Evolving Definitions of Mental Illness and Wellness

    OpenAIRE

    Tara W. Strine, MPH; Satvinder Dhingra, MPH; Lela R. McKnight-Eily, PhD; Carol D. Ryff, PhD; Elsie J. Freeman, MD, MPH; Ronald W. Manderscheid, PhD

    2010-01-01

    Understanding of the definitions of wellness and illness has changed from the mid-20th century to modern times, moving from a diagnosis-focused to a person-focused definition of mental illnesses, and from an "absence of disease" model to one that stresses positive psychological function for mental health. Currently, wellness refers to the degree to which one feels positive and enthusiastic about oneself and life, whereas illness refers to the presence of disease. These definitions apply to ph...

  11. Understanding Well-being: Lessons for Leadership

    Science.gov (United States)

    2012-02-02

    Indicators for Well -Being Assessment- Oxford Poverty Development Initiative (Sammans, 2007) – Satisfaction with Life (Diener, Emmons, & Griffin, 1985...Physical, mental, and social health-related quality of life – Well -being/ satisfaction – Participation in common activities Health-Related Quality...either of two sets of subjective or psychological attributes: – life satisfaction , higher positive/lower negative affect, by self-assessment (the

  12. Quantum mechanics

    CERN Document Server

    Mandl, Franz

    1992-01-01

    The Manchester Physics Series General Editors: D. J. Sandiford; F. Mandl; A. C. Phillips Department of Physics and Astronomy, University of Manchester Properties of Matter B. H. Flowers and E. Mendoza Optics Second Edition F. G. Smith and J. H. Thomson Statistical Physics Second Edition F. Mandl Electromagnetism Second Edition I. S. Grant and W. R. Phillips Statistics R. J. Barlow Solid State Physics Second Edition J. R. Hook and H. E. Hall Quantum Mechanics F. Mandl Particle Physics Second Edition B. R. Martin and G. Shaw The Physics of Stars Second Edition A. C. Phillips Computing for Scient

  13. Quantum mechanics

    CERN Document Server

    Zagoskin, Alexandre

    2015-01-01

    Written by Dr Alexandre Zagoskin, who is a Reader at Loughborough University, Quantum Mechanics: A Complete Introduction is designed to give you everything you need to succeed, all in one place. It covers the key areas that students are expected to be confident in, outlining the basics in clear jargon-free English, and then providing added-value features like summaries of key ideas, and even lists of questions you might be asked in your exam. The book uses a structure that is designed to make quantum physics as accessible as possible - by starting with its similarities to Newtonian physics, ra

  14. Statistical mechanics

    CERN Document Server

    Sheffield, Scott

    2009-01-01

    In recent years, statistical mechanics has been increasingly recognized as a central domain of mathematics. Major developments include the Schramm-Loewner evolution, which describes two-dimensional phase transitions, random matrix theory, renormalization group theory and the fluctuations of random surfaces described by dimers. The lectures contained in this volume present an introduction to recent mathematical progress in these fields. They are designed for graduate students in mathematics with a strong background in analysis and probability. This book will be of particular interest to graduate students and researchers interested in modern aspects of probability, conformal field theory, percolation, random matrices and stochastic differential equations.

  15. Ground Water Quality of Selected Wells

    Directory of Open Access Journals (Sweden)

    Mosher R. Ahmed

    2013-05-01

    Full Text Available In order to characterize ground water quality in Zaweta district / Dohuk governorate, eight wells are selected to represent their water quality. Monthly samples are collected from the wells for the period from October 2005 to April 2006. The samples are tested for conductivity, total dissolved solids, pH, total hardness, chloride, alkalinity and nitrate according to the standard methods. The results of statistical analysis showed significant difference among the wells water quality in the measured parameters. Ground water quality of Zaweta district has high dissolved ions due to the nature of studied area rocks. Total dissolved solids of more than 1000 mg/l made the wells Gre-Qassroka, Kora and Swaratoka need to be treated to make taste palatable. Additionally high electrical conductivity and TDS made Zaweta ground water have a slight to moderate restriction to crop growth. The high alkalinity of Zaweta ground water indicated stabilized pH. The water quality of all the wells is found excessively hard. The nitrate concentration of Zaweta ground water ranged between 0.19-42.4 mg/l below the guidelines for WHO and the maximum nitrate concentration is recorded in Kora well .

  16. Evolving Definitions of Mental Illness and Wellness

    Directory of Open Access Journals (Sweden)

    Tara W. Strine, MPH

    2010-01-01

    Full Text Available Understanding of the definitions of wellness and illness has changed from the mid-20th century to modern times, moving from a diagnosis-focused to a person-focused definition of mental illnesses, and from an “absence of disease” model to one that stresses positive psychological function for mental health. Currently, wellness refers to the degree to which one feels positive and enthusiastic about oneself and life, whereas illness refers to the presence of disease. These definitions apply to physical as well as mental illness and wellness. In this article, we build on the essential concepts of wellness and illness, discuss how these definitions have changed over time, and discuss their importance in the context of health reform and health care reform. Health reform refers to efforts focused on health, such as health promotion and the development of positive well-being. Health care reform refers to efforts focused on illness, such as treatment of disease and related rehabilitation efforts.

  17. National accounts of subjective well-being.

    Science.gov (United States)

    Diener, Ed; Oishi, Shigehiro; Lucas, Richard E

    2015-04-01

    Diener (2000) proposed that National Accounts of Well-Being be created to complement existing economic and social indicators that reflect the quality of life in nations. These national accounts can provide valuable information to policymakers and other leaders. Systematic measurement of subjective well-being provides novel information about the quality of life in societies, and it allows for the accumulation of detailed information regarding the circumstances that are associated with high subjective well-being. Thus, accounts of subjective well-being can help decision makers evaluate policies that improve societies beyond economic development. Progress with well-being accounts has been notable: Prestigious scientific and international institutions have recommended the creation of such national accounts, and these recommendations have been adopted in some form in over 40 nations. In addition, increasing research into policy-relevant questions reveals the importance of the accounts for policy. Psychologists can enlarge their role in the formulation and adoption of policies by actively studying and using accounts of subjective well-being to evaluate and support the policies they believe are needed.

  18. Description of calls from private well owners to a national well water hotline, 2013.

    Science.gov (United States)

    Ridpath, Alison; Taylor, Ethel; Greenstreet, Charlene; Martens, Margaret; Wicke, Heather; Martin, Colleen

    2016-02-15

    Water Systems Council (WSC) is a national, non-profit organization providing education and resources to private household well owners. Since 2003, WSC has provided wellcare®, a toll-free telephone hotline to answer questions from the public regarding well stewardship. In order to identify knowledge gaps regarding well stewardship among private well owners, we obtained data from WSC and reviewed calls made during 2013 to wellcare®. WSC records data from each wellcare® call-including caller information, primary reason for call, main use of well water, and if they were calling about a cistern, private well, shared well, or spring. We searched for calls with key words indicating specific contaminants of interest and reviewed primary reasons for calls. Calls classified as primarily testing-related were further categorized depending on whether the caller asked about how to test well water or how to interpret testing results. During 2013, wellcare® received 1100 calls from private well owners who were residents of 48 states. Among these calls, 87 (8%) mentioned radon, 83 (8%) coliforms, 51 (5%) chemicals related to fracking, 34 (3%) arsenic, and 32 (3%) nitrates key words. Only 38% of private well owners reported conducting any well maintenance activities, such as inspecting, cleaning, repairing the well, or testing well water, during the previous 12 months. The primary reason for calls were related to well water testing (n=403), general information relating to wells (n=249), contaminants (n=229), and well water treatment (n=97). Among calls related to testing, 319 had questions about how to test their well water, and 33 had questions about how to interpret testing results. Calls from private well owners to the wellcare® Hotline during 2013 identified key knowledge gaps regarding well stewardship; well owners are generally not testing or maintaining their wells, have questions about well water testing treatment, and concerns about well water contaminants.

  19. Characterization Well R-7 Geochemistry Report

    Energy Technology Data Exchange (ETDEWEB)

    P.Longmire; F.Goff

    2002-12-01

    This report provides analytical results for four groundwater-sampling rounds conducted at characterization well R-7. The goal of the characterization efforts was to assess the hydrochemistry and to determine if contaminants from Technical Area (TA)-2 and TA-21 of the Los Alamos National Laboratory (LANL or the Laboratory) are present in the regional aquifer in the vicinity of the well. Figure 1.0-1 shows the well's location in the narrow upper part of Los Alamos Canyon, between the inactive Omega West reactor and the mouth of DP Canyon. Well R-7 is in an excellent location to characterize the hydrology and groundwater chemistry in both perched groundwater and the regional aquifer near sites of known Laboratory effluent release, including radionuclides and inorganic chemicals (Stone et al. 2002, 72717). The Risk Reduction and Environmental Stewardship-Remediation (RRES-R) Program (formerly the Environmental Restoration [ER] Project) installed well R-7 as part of groundwater investigations to satisfy requirements of the ''Hydrogeologic Workplan'' (LANL 1998, 59599) and to support the Laboratory's ''Groundwater Protection Management Program Plan'' (LANL 1996, 70215). Well R-7 was designed primarily to provide geochemical or water quality and hydrogeologic data for the regional aquifer within the Puye Formation. This report also presents a geochemical evaluation of the analytical results for well R-7 and provides hydrogeochemical interpretations using analytical results for groundwater samples collected at the well. Discussion of other hydrogeochemical data collected within the east-central portion of the Laboratory, however, is deferred until they can be evaluated in the context of sitewide information collected from other RRES and Hydrogeologic Workplan characterization wells (R-8A, R-9, and R-9i). Once all deep groundwater investigations in the east-central portion of the Laboratory are completed, geochemical and

  20. Ethylene oxidation chemistry in a well-stirred reactor

    Energy Technology Data Exchange (ETDEWEB)

    Marinov, N. [Lawrence Livermore National Lab., CA (United States); Malte, P. [Univ. of Washington, Seattle, WA (United States). Dept. of Mechanical Engineering

    1994-09-01

    Ethylene is an important intermediate in the combustion of methane, larger aliphatic hydrocarbons, and aromatics. Detailed fuel-lean C{sub 2}H{sub 4}H{sub 2}O/air well-stirred reactor data by Thornton were used to analyze reported combustion chemistry mechanisms and the development of this study`s ethylene oxidation mechanism. The data set had been obtained for the temperature range 1,003 to 1,253 K and ethylene-oxygen equivalence ratio range 0.086 to 0.103, at atmospheric pressure. Mechanisms were derived from reaction sets of Westbrook and Pitz, and Dagaut, Cathonnet and Boettner. Examination of each reported mechanism indicated unusually large kinetic rates for the vinyl decomposition reaction were used in order to obtain agreement with the Thornton data set. An ethylene oxidation model was developed in order to address the mechanistic problems of the previous models. This study`s mechanism well simulated the overall rate of ethylene oxidation and concentration profiles of CO, CO{sub 2}, H{sub 2}, CH{sub 2}O, C{sub 2}H{sub 2}, CH{sub 3}OH, CH{sub 4}, and C{sub 2}H{sub 6}. Successful predictions by the model were dependent on a new high temperature vinyl oxidation reaction route, C{sub 2}H{sub 3} + O{sub 2} = CH{sub 2}CHO + O with a branching ratio of 1.19--1.21 at 1,053 K to 1.63--2.47 at 1,253 K. The branching ratio values were dependent upon the extent of fall-off for the C{sub 2}H{sub 3} + O{sub 2} = CH{sub 2}O + HCO reaction. 132 refs.

  1. Computation in Classical Mechanics

    CERN Document Server

    Timberlake, Todd

    2007-01-01

    There is a growing consensus that physics majors need to learn computational skills, but many departments are still devoid of computation in their physics curriculum. Some departments may lack the resources or commitment to create a dedicated course or program in computational physics. One way around this difficulty is to include computation in a standard upper-level physics course. An intermediate classical mechanics course is particularly well suited for including computation. We discuss the ways we have used computation in our classical mechanics courses, focusing on how computational work can improve students' understanding of physics as well as their computational skills. We present examples of computational problems that serve these two purposes. In addition, we provide information about resources for instructors who would like to include computation in their courses.

  2. Mechanical Biological Treatment

    DEFF Research Database (Denmark)

    Bilitewski, B-; Oros, Christiane; Christensen, Thomas Højlund

    2011-01-01

    or residual waste (after some recyclables removed at the source). The concept was originally to reduce the amount of waste going to landfill, but MBT technologies are today also seen as plants recovering fuel as well as material fractions. As the name suggests the technology combines mechanical treatment......The basic processes and technologies of composting and anaerobic digestion, as described in the previous chapters, are usually used for specific or source-separated organic waste flows. However, in the 1990s mechanical biological waste treatment technologies (MBT) were developed for unsorted...... technologies (screens, sieves, magnets, etc.) with biological technologies (composting, anaerobic digestion). Two main technologies are available: Mechanical biological pretreatment (MBP), which first removes an RDF fraction and then biologically treats the remaining waste before most of it is landfilled...

  3. Crude oil burning mechanisms

    DEFF Research Database (Denmark)

    van Gelderen, Laurens; Malmquist, L.M.V.; Jomaas, Grunde

    2015-01-01

    In order to improve predictions for the burning efficiency and the residue composition of in-situ burning of crude oil, the burning mechanism of crude oil was studied in relation to the composition of its hydrocarbon mixture, before, during and after the burning. The surface temperature, flame...... to the predictions of four conceptual models that describe the burning mechanism of multicomponent fuels. Based on the comparisons, hydrocarbon liquids were found to be best described by the Equilibrium Flash Vaporization model, showing a constant gas composition and gasification rate. The multicomponent fuels...... followed the diffusion-limited gasification model, showing a change in the hydrocarbon composition of the fuel and its evaporating gases, as well as a decreasing gasification rate, as the burning progressed. This burning mechanism implies that the residue composition and burning efficiency mainly depend...

  4. Integrating function and mechanism.

    Science.gov (United States)

    McNamara, John M; Houston, Alasdair I

    2009-12-01

    Behavioural ecology often makes the assumption that animals can respond flexibly by adopting the optimal behaviour for each circumstance. However, as ethologists have long known, behaviour is determined by mechanisms that are not optimal in every circumstance. As we discuss here, we believe that it is necessary to integrate these separate traditions by considering the evolution of mechanisms, an approach referred to as 'Evo-mecho'. This integration is timely because there is a growing awareness of the importance of environmental complexity in shaping behaviour; there are established and effective computational procedures for simulating evolution and there is rapidly increasing knowledge of the neuronal basis of decision-making. Although behavioural ecologists have built complex models of optimal behaviour in simple environments, we argue that they need to focus on simple mechanisms that perform well in complex environments.

  5. Modeling of well drilling heating on crude oil using microwave

    Science.gov (United States)

    Muntini, Melania Suweni; Pramono, Yono Hadi; Yustiana

    2016-03-01

    As the world's oil reserves are dwindling, some researchers have been prompted to make a breakthrough to further improve the efficiency of exploration and production. One of the technologies used is heating the crude oil. This paper presents the modeling results of heat treatment on crude oil using microwave energy. Modeling is conducted by assuming that the diameter of the well is 11,16 cm, the heat source is applied on the surface of the well, and the cut-off frequency in the air and on crude oil are 1,56 GHz. and 0.91 GHz, respectively. The energy generated by the microwave radiation is converted into heat energy which is absorbed by the crude oil. Consequently, this energy increases the temperature of crude oil through a heat transfer mechanism. The results obtained showed that the temperature of crude oil is about 200°C at a depth of 62.5cm, and at a distance of 3 cm from the center of the well. Temperature along the well follows an exponential function, which is from the center of the well in the direction radially outward from the cylinder axis. It has been observed that the temperature decreases as measured from the well surface along the cylinder.

  6. Religion, Time Use, and Affective Well-Being

    Directory of Open Access Journals (Sweden)

    Chaeyoon Lim

    2016-08-01

    Full Text Available This study examines whether religious people experience more positive affect and less negative affect in everyday life and, if they do, whether it is because of the differences in how they allocate time to different activities or because they feel differently during similar activities. Using the well-being module from the 2010–13 American Time Use Survey (ATUS, I show that churchgoers enjoy a significantly higher level of affective well-being on Sunday than non-churchgoers do. The supplementary analysis of the Gallup Daily Poll data suggests that this higher level of affective well-being among churchgoers is found throughout the rest of the week as well. Further analyses of the ATUS demonstrate that about 40 percent of the affective well-being gap between churchgoers and non-churchgoers on Sunday can be explained by how they spend their time differently. Churchgoers spend more time on Sunday participating in pleasant activities shared with family members and friends than non-churchgoers do. More than half of the gap, however, remains unexplained, implying that it has to do with how they feel during similar activities rather than the activities in which they participate. I discuss the implications of these findings on the mechanisms underlying the link between religion and subjective well-being.

  7. Modeling of well drilling heating on crude oil using microwave

    Energy Technology Data Exchange (ETDEWEB)

    Muntini, Melania Suweni, E-mail: melania@physics.its.ac.id; Pramono, Yono Hadi; Yustiana [Physics Department, Institut Teknologi Sepuluh Nopember, Surabaya Kampus ITS, Sukolilo, Surabaya 60111 (Indonesia)

    2016-03-11

    As the world’s oil reserves are dwindling, some researchers have been prompted to make a breakthrough to further improve the efficiency of exploration and production. One of the technologies used is heating the crude oil. This paper presents the modeling results of heat treatment on crude oil using microwave energy. Modeling is conducted by assuming that the diameter of the well is 11,16 cm, the heat source is applied on the surface of the well, and the cut-off frequency in the air and on crude oil are 1,56 GHz. and 0.91 GHz, respectively. The energy generated by the microwave radiation is converted into heat energy which is absorbed by the crude oil. Consequently, this energy increases the temperature of crude oil through a heat transfer mechanism. The results obtained showed that the temperature of crude oil is about 200°C at a depth of 62.5cm, and at a distance of 3 cm from the center of the well. Temperature along the well follows an exponential function, which is from the center of the well in the direction radially outward from the cylinder axis. It has been observed that the temperature decreases as measured from the well surface along the cylinder.

  8. Selecting Aquifer Wells for Planned Gyroscopic Logging

    Energy Technology Data Exchange (ETDEWEB)

    Rohe, Michael James; Studley, Gregory Wayne

    2002-04-01

    Understanding the configuration of the eastern Snake River Plain aquifer's water table is made difficult, in part, due to borehole deviation in aquifer wells. A borehole has deviation if it is not vertical or straight. Deviation impairs the analysis of water table elevation measurements because it results in measurements that are greater than the true distance from the top of the well to the water table. Conceptual models of the water table configuration are important to environmental management decision-making at the INEEL; these models are based on measurements of depth to the water table taken from aquifer wells at or near the INEEL. When accurate data on the amount of deviation in any given borehole is acquired, then measurements of depth-to-water can be adjusted to reflect the true depth so more accurate conceptual models can be developed. Collection of additional borehole deviation data with gyroscopic logging is planned for selected wells to further our confidence in the quality of water level measurements. Selection of wells for the planned logging is based on qualitative and quantitative screening criteria. An existing data set from magnetic deviation logs was useful in establishing these criteria however, are considered less accurate than gyroscopic deviation logs under certain conditions. Population distributions for 128 aquifer wells with magnetic deviation data were used to establish three quantitative screening thresholds. Qualitative criteria consisted of administrative controls, accessibility issues, and drilling methods. Qualitative criteria eliminated all but 116 of the 337 aquifer wells, in the vicinity of the INEEL, that were initially examined in this screening effort. Of these, 72 have associated magnetic deviation data; 44 do not. Twenty-five (25) of the 72 wells with magnetic deviation data have deviation greater than one of the three quantitative screening thresholds. These 25 are recommended for the planned gyroscopic borehole deviation

  9. Constructing a systems psychodynamic wellness model

    Directory of Open Access Journals (Sweden)

    Sanchen Henning

    2012-01-01

    Full Text Available Orientation: The researchers constructed a Systems Psychodynamic Wellness Model (SPWM by merging theory and concepts from systems psychodynamics and positive psychology. They then refined the model for application in organisations during a Listening Post (LP that comprised experienced subject experts.Research purpose: The purpose of the research was to construct and refine the SPWM in order to understand psychological wellness at the individual, group and organisational levels.Motivation for the study: There is no psychological wellness model that integrates the principles of systems psychodynamics and positive psychology. Systems psychodynamics traditionally focuses on so-called negative behaviour whilst positive psychology tends to idealise positive behaviour. This research tried to merge these views in order to apply them to individual, group and organisational behaviour.Research design, approach and method: The researchers used qualitative, descriptive and conceptual research. They conducted an in-depth literature study to construct the model. They then refined it using the LP.Main findings: The researchers identified 39 themes. They categorised them into three different levels. Three first-level themes emerged as the highest level of integration: identity, hope and love. The nine second-level themes each consisted of three more themes. They were less complex and abstract than the first-level themes. The least complex 27 third-level themes followed.Practical/managerial implications: One can apply the SPWM as a qualitative diagnostic tool for understanding individual, group and organisational wellness and for consulting on systemic wellness.Contribution/value-add: The SPWM offers a model for understanding individual, group and organisational wellness and for consulting on systemic wellness.

  10. [Multiple mechanisms of depression].

    Science.gov (United States)

    Liu, Chun-Lin; Ruan, Ke-Feng; Gao, Jun-Wei; Wu, Fei; Zhang, Ji-Quan

    2013-08-01

    Depression is a grievous mental disease with an increasing high morbidity year by year and a serious social harm. The pathogenesises of depression is complicated and involves with multi-mechanisms and multi-organs. Recent studies demondtrate that in the nerval system and endocrine system there are many types of neurotransmitters and hormones, as well as their receptors, involved in depression. This paper reviews the research progress of depression in recent years.

  11. Riskfactors and underlying mechanisms

    OpenAIRE

    2015-01-01

    Childhood interpersonal traumatizations increase the risk for revictimizations as well as for psychological disorders like the posttraumatic stress disorder (PTSD). Different variables and mechanisms underlying revictimization are discussed in current literature. However, empiri-cal data on revictimization is poor and inconsistant. Guilt and shame following traumatic events are considered as risk factors for the development and persistence of PTSD. PTSD is frequently associated with trauma-re...

  12. Lifetime of Mechanical Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Leland, K.

    1999-07-01

    The gas plant at Kaarstoe was built as part of the Statpipe gas transport system and went on stream in 1985. In 1993 another line was routed from the Sleipner field to carry condensate, and the plant was extended accordingly. Today heavy additional supply- and export lines are under construction, and the plant is extended more than ever. The main role of the factory is to separate the raw gas into commercial products and to pump or ship it to the markets. The site covers a large number of well-known mechanical equipment. This presentation deals with piping, mechanical and structural disciplines. The lifetime of mechanical equipment is often difficult to predict as it depends on many factors, and the subject is complex. Mechanical equipment has been kept in-house, which provides detailed knowledge of the stages from a new to a 14 years old plant. The production regularity has always been very high, as required. The standard of the equipment is well kept, support systems are efficient, and human improvisation is extremely valuable.

  13. Conformal mechanics

    CERN Document Server

    Gonera, Joanna

    2012-01-01

    The SL(2,R) invariant Hamiltonian systems are discussed within the frame- work of the orbit method. It is shown that both dynamics and symmetry trans- formations are globally well-defined on phase space. The flexibility in the choice of time variable and Hamiltonian function described in the paper by de Alfaro et al. (Nuovo Cim. 34A (1976),569) is related to the nontrivial global structure of 1 + 0-dimensional space-time. The operational definition of time is discussed.

  14. Antibacterial activity of silver nanoparticles with different morphologies as well as their possible antibacterial mechanism

    Science.gov (United States)

    Hu, Guansong; Jin, Wenxiu; Chen, Qingyuan; Cai, Yuchun; Zhu, Qiuhua; Zhang, Wanzhong

    2016-10-01

    Silver nanoparticles (AgNPs) have good antibacterial activity and their morphologies have important influence on their activity. The relationship between their bactericidal property and morphology has not been studied thoroughly. Silver triangular nanoplates have basic {111} surface, nanospheres and nanocubes mainly have {100} planes, and nanorods have {100} side surfaces and {111} end facets. It was said that {111} crystal plane of AgNPs may play a prime role in antibacterial progress. Moreover, the antibacterial activity of nanocubes is not very clear when compared to nanoparticles with other morphologies. In this paper, we studied the antibacterial activity of nanocubes and attempted to confirm whether nanoparticles with {111} crystal facet truly had stronger antibacterial activity than other nanoparticles. We prepared four kinds of AgNPs and found silver triangle nanoplates had the best antibacterial activity, while nanospheres, nanocubes and short nanorods showed similar efficacy. It may provide a reference for safe application of AgNPs with different morphologies in the medical field.

  15. Entiat 4Mile WELLs Completion Report, 2006.

    Energy Technology Data Exchange (ETDEWEB)

    Malinowksi, Richard

    2007-01-01

    The Entiat 4-mile Wells (Entiat 4-mile) project is located in the Entiat subbasin and will benefit Upper Columbia steelhead, spring Chinook and bull trout. The goal of this project is to prevent juvenile fish from being diverted into an out-of-stream irrigation system and to eliminate impacts due to the annual maintenance of an instream pushup dam. The objectives include eliminating a surface irrigation diversion and replacing it with two wells, which will provide Bonneville Power Administration (BPA) and the Bureau of Reclamation (Reclamation) with a Federal Columbia River Power System (FCRPS) BiOp metric credit of one. Wells were chosen over a new fish screen based on biological benefits and costs. Long-term biological benefits are provided by completely eliminating the surface diversion and the potential for fish entrainment in a fish screen. Construction costs for a new fish screen were estimated at $150,000, which does not include other costs associated with implementing and maintaining a fish screening project. Construction costs for a well were estimated at $20,000 each. The diversion consisted of a pushup dam that diverted water into an off-channel pond. Water was then pumped into a pressurized system for irrigation. There are 3 different irrigators who used water from this surface diversion, and each has multiple water right claims totaling approximately 5 cfs. Current use was estimated at 300 gallons per minute (approximately 0.641 cfs). Some irrigated acreage was taken out of orchard production less than 5 years ago. Therefore, approximately 6.8 acre-feet will be put into the State of Washington Trust Water Right program. No water will be set aside for conservation savings. The construction of the two irrigation wells for three landowners was completed in September 2006. The Lower Well (Tippen/Wick) will produce up to 175 gpm while the Upper Well (Griffith) will produce up to 275 gpm during the irrigation season. The eight inch diameter wells were

  16. Computer analysis of digital well logs

    Science.gov (United States)

    Scott, James H.

    1984-01-01

    A comprehensive system of computer programs has been developed by the U.S. Geological Survey for analyzing digital well logs. The programs are operational on a minicomputer in a research well-logging truck, making it possible to analyze and replot the logs while at the field site. The minicomputer also serves as a controller of digitizers, counters, and recorders during acquisition of well logs. The analytical programs are coordinated with the data acquisition programs in a flexible system that allows the operator to make changes quickly and easily in program variables such as calibration coefficients, measurement units, and plotting scales. The programs are designed to analyze the following well-logging measurements: natural gamma-ray, neutron-neutron, dual-detector density with caliper, magnetic susceptibility, single-point resistance, self potential, resistivity (normal and Wenner configurations), induced polarization, temperature, sonic delta-t, and sonic amplitude. The computer programs are designed to make basic corrections for depth displacements, tool response characteristics, hole diameter, and borehole fluid effects (when applicable). Corrected well-log measurements are output to magnetic tape or plotter with measurement units transformed to petrophysical and chemical units of interest, such as grade of uranium mineralization in percent eU3O8, neutron porosity index in percent, and sonic velocity in kilometers per second.

  17. Well test analysis in fractured media

    Energy Technology Data Exchange (ETDEWEB)

    Karasaki, K.

    1986-04-01

    In this study the behavior of fracture systems under well test conditions and methods for analyzing well test data from fractured media are investigated. Several analytical models are developed to be used for analyzing well test data from fractured media. Numerical tools that may be used to simulate fluid flow in fractured media are also presented. Three types of composite models for constant flux tests are investigated. Several slug test models with different geometric conditions that may be present in fractured media are also investigated. A finite element model that can simulate transient fluid flow in fracture networks is used to study the behavior of various two-dimensional fracture systems under well test conditions. A mesh generator that can be used to model mass and heat flow in a fractured-porous media is presented. This model develops an explicit solution in the porous matrix as well as in the discrete fractures. Because the model does not require the assumptions of the conventional double porosity approach, it may be used to simulate cases where double porosity models fail.

  18. Religiosity and psychological well-being.

    Science.gov (United States)

    Leondari, Angeliki; Gialamas, Vasilios

    2009-08-01

    The aim of the present study was to investigate the relationship between religiosity and psychological well-being in a sample of Greek Orthodox Christians. Previous research has documented that personal devotion, participation in religious activities, and religious salience are positively associated with different criteria of psychological well-being. The sample (83 men and 280 women) with an age range from 18 to 48 years, was strongly skewed with respect to sex (77% female) and education level (95% were university students or university graduates). Religiosity was operationalized as church attendance, frequency of prayer and belief salience. In addition, a single item referring to beliefs about God was used. Depression, anxiety, loneliness, and general life satisfaction were selected as dependent variables because they reflect important dimensions of psychological well-being. Preliminary analyses showed that sex was significantly related to the three religiosity variables (church attendance, frequency of prayer, belief salience), with women being more religious than men. Consistent with previous research, correlations suggested that church attendance and belief salience were associated with better life satisfaction. The results of hierarchical regression analysis showed a significant positive association between anxiety and frequency of personal prayer. Finally, personal beliefs about God did not seem to relate to any of the psychological well-being measures. The results of the present study partially support the hypothesized association between religiosity and psychological well-being.

  19. Nonacid Reactive Solution for deep well stimulation

    Energy Technology Data Exchange (ETDEWEB)

    Pendergrass, J.; Bell, D.; Bishop, D.; Campbell, P.; Copeland, J.

    1984-04-01

    Certain formations in the Anardarko Basin have not responded well to acid-base cleanup or breakdown treatments. The use of a Nonacid Reactive Solution (NARS) for deep wells where both formation sensitivity and excessive corrosion of tubular goods present problems can produce improved well response. Laboratory analyses of the Morrow, Red Fork and Springer formations in the Anadarko Basin justify the use of NARS for stimulation treatments in these formations. Laboratory data and production results demonstrate that NARS can be used as an economical and effective method of mud removal in wells which are drilled with oil-base mud. Further studies investigate the effect of NARS on downhole tubular goods. Well histories in the three formations support the effectiveness of the fluid, and the variety of treatment designs dictated by the diverse formation characteristics demonstrates the versatility of NARS. By concentrating the study of rock lithologies, core and laboratory analyses, and production results, NARS can be used in breakdown and cleanup treatments more effectively than acid-base fluids in sensitive formations.

  20. A wellness software platform with smart wearable devices and the demonstration report for personal wellness management

    Science.gov (United States)

    Kang, Won-Seok; Son, Chang-Sik; Lee, Sangho; Choi, Rock-Hyun; Ha, Yeong-Mi

    2017-07-01

    In this paper, we introduce a wellness software platform, called WellnessHumanCare, is a semi-automatic wellness management software platform which has the functions of complex wellness data acquisition(mental, physical and environmental one) with smart wearable devices, complex wellness condition analysis, private-aware online/offline recommendation, real-time monitoring apps (Smartphone-based, Web-based) and so on and we has demonstrated a wellness management service with 79 participants (experimental group: 39, control group: 40) who has worked at experimental group (H Corp.) and control group (K Corp.), Korea and 3 months in order to show the efficiency of the WellnessHumanCare.

  1. Continuous circulation apparatus for air drilling well bore operations

    Energy Technology Data Exchange (ETDEWEB)

    Stallings, J.L.

    1982-02-16

    An apparatus is disclosed for maintaining a continuous supply of air pressure downhole during a well bore drilling operation, even during the addition of a pipe section to the drill string. It consists of a housing installed at the surface of the well at the position of the drilling equipment wherein the upper end of the drill string is separated from the drive mechanism in order that a new piece of drill pipe may be added to the drill string, a flapper or closure member pivotally secured within the housing normally held in an open position by the outer periphery of the drill string and spring urged in a direction toward the open end of the sleeve through which the drive mechanism passes when the drive mechanism has been backed off or removed for the addition of a section of pipe to the drill string, and a by-pass line in communication with the interior of the housing for directing air pressure from the air supply to the housing when the flapper member is in the closed position whereby the air pressure may be circulated downwardly through the drill string for maintaining the air circulation downhole during the entire drilling operation.

  2. Anisotropic Spin Splitting in Step Quantum Wells

    Institute of Scientific and Technical Information of China (English)

    HAO Ya-Fei; CHEN Yong-Hai; HAO Guo-Dong; WANG Zhan-Guo

    2009-01-01

    By the method of finite difference,the anisotropic spin splitting of the Alx Ga1-x As/GaAs/Aly Ga1-y As/Alx Ga1-x As step quantum wells (QWs) are theoretically investigated considering the interplay of the bulk inversion asymmetry and structure inversion asymmetry induced by step quantum well structure and external electric field.We demonstrate that the anisotropy of the total spin splitting can be controlled by the shape of the QWs and the external electric field.The interface related Rashba effect plays an important effect on the anisotropic spin splitting by influencing the magnitude of the spin splitting and the direction of electron spin.The Rashba spin splitting presents in the step quantum wells due to the interface related Rashba effect even without external electric field or magnetic field.

  3. Electronic Quantum Confinement in Cylindrical Potential Well

    CERN Document Server

    Baltenkov, A S

    2016-01-01

    The effects of quantum confinement on the momentum distribution of electrons confined within a cylindrical potential well have been analyzed. The motivation is to understand specific features of the momentum distribution of electrons when the electron behavior is completely controlled by the parameters of a non-isotropic potential cavity. It is shown that studying the solutions of the wave equation for an electron confined in a cylindrical potential well offers the possibility to analyze the confinement behavior of an electron executing one- or two-dimensional motion in the three-dimensional space within the framework of the same mathematical model. Some low-lying electronic states with different symmetries have been considered and the corresponding wave functions have been calculated; the behavior of their nodes and their peak positions with respect to the parameters of the cylindrical well has been analyzed. Additionally, the momentum distributions of electrons in these states have been calculated. The limi...

  4. Well testing of tight gas reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Jahanbani, A.; Aguilera, R. [Calgary Univ., AB (Canada)

    2008-07-01

    This paper discussed methods of evaluating tight gas sand reservoirs. Conventional well testing is not used in tight gas reservoirs due to their low permeability. Tight gas well testing techniques include pressure-dependent permeability testing; the estimation of pseudo--time at the average pressure of the region of influence; and supercharge effect testing. Pre-frac test analysis techniques were also discussed. Pressure-transient test designs were reviewed along with instantaneous source response methods for calculating influence functions. Impulse-fracture tests were discussed, as well as perforation inflow diagnostic testing. Perforation inflow tests provided reasonable estimates of reservoir parameters. Methods of determining pressure-dependent permeability data were discussed. After closure analysis (ACA) was used to analyze formation permeability. It was concluded that ACA can be coupled with pre-closure analysis to optimize fracture stimulation plans. The 22 refs., 17 figs.

  5. HORIZONTAL WELL DRILL-IN FLUIDS

    Directory of Open Access Journals (Sweden)

    Nediljka Gaurina-Međimurec

    1998-12-01

    Full Text Available Main objective of horizontal driling is to place a drain-hole for a long distance within the pay zone to enhance productivity or injectivity. In drilling horizontal wells, more serious problems appear than in drilling vertical wells. These problems are: poor hole cleaning, excessive torque and drag, hole filling, pipe stucking, wellbore instability, loss of circulation, formation damage, poor cement job, and difficulties at logging jobs. From that reason, successful drilling and production of horizontal well depends largely on the fluid used during drilling and completion phases. Several new fluids, that fulfill some or all of required properties (hole cleaning, cutting suspension, good lubrication, and relative low formation damage, are presented in this paper.

  6. Eating habits and subjective well-being

    DEFF Research Database (Denmark)

    Schnettler, Berta Lorena; Miranda, Horacio; Lobos, Germán

    2015-01-01

    The purpose of this study was to distinguish and characterize university student typologies according to their life satisfaction and satisfaction with their food-related life. An online survey was applied between June and August 2013 in five state universities in Chile, to 369 university students...... (mean age = 20.9 years, SD = 2.27). The survey included the Health-related Quality of Life Index-4 (HRQOL), Satisfaction with Life Scale (SWLS), Satisfaction with Food-related Life Scale (SWFL), as well as questions about the place of residence, importance of food for well-being, frequency of meals...... with higher levels of life satisfaction and satisfaction with food-related life live with their parents, eat at home more frequently, report fewer health problems, have healthful eating habits and consider food very important for their well-being. Although it is necessary to promote or improve the campaigns...

  7. Strained quantum well photovoltaic energy converter

    Science.gov (United States)

    Freundlich, Alexandre (Inventor); Renaud, Philippe (Inventor); Vilela, Mauro Francisco (Inventor); Bensaoula, Abdelhak (Inventor)

    1998-01-01

    An indium phosphide photovoltaic cell is provided where one or more quantum wells are introduced between the conventional p-conductivity and n-conductivity indium phosphide layer. The approach allows the cell to convert the light over a wider range of wavelengths than a conventional single junction cell and in particular convert efficiently transparency losses of the indium phosphide conventional cell. The approach hence may be used to increase the cell current output. A method of fabrication of photovoltaic devices is provided where ternary InAsP and InGaAs alloys are used as well material in the quantum well region and results in an increase of the cell current output.

  8. Geothermal well drilling manual at Cerro Prieto

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez P., A.; Flores S., M.

    1982-08-10

    The objective of the drilling manual is to solve all problems directly related to drilling during the construction of a well. In this case, the topics dealt which are drilling fluids and hydraulics to be applied in the field to improve drilling progress, eliminate risks and achieve good well-completion. There are other topics that are applicable such as drill bits and the drilling string, which are closely linked to drilling progress. On this occasion drilling fluid and hydraulics programs are presented, in addition to a computing program for a Casio FX-502P calculator to be applied in the field to optimize hydraulics and in the analysis of hydraulics for development and exploration wells at their different intervals.

  9. WELL TESTING (YOUQIJING CESHI)

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Research of Theory & Method. Study on Analysis Method of the Continuous Monitoring Data of Low-Permeability Reservoir. 2012,21 ( 1 ).1 - 3 Lin Jia' en ( Xi' an Petroleum University), Wang Qian ( Yanchang Oilfield Co., Ltd. ) Based on analysis methods of the existed Fetkovieh and Blasingame production data, the non-Dare}, flow model of the circular bound- ary homogeneous reservoirs with vertical wells radial shed is built, and the typical curves of the Fetkovich and Blasingame in case of non-Dare}, flow are drawn. This analysis method of the continuous produetion data through the continuous monitoring production data of unclosing well can get the same interpretation results of reservoir from the we1 testing analysis of conventional closing well, which solves the applied problems of data analysis for a long time of continuous monitoring in low-permeability reservoir.

  10. Recurrent well-differentiated thyroid carcinoma.

    Science.gov (United States)

    Magarey, Matthew J R; Freeman, Jeremy L

    2013-07-01

    The incidence of Well-differentiated Thyroid Carcinoma (WDTC) has been increasing over the past several decades. Consequently, so has the incidence of recurrence, which ranges from 15% to 30%. Factors leading to increased risk of recurrence are well described. However, the impact of local and regional recurrence is not well understood, but distant recurrence dramatically reduces 10-year survival to 50%. Recurrent WDTC has several established options for treatment; Observation, Radioactive Iodine (RAI), Surgery and External Beam Radiotherapy (EBRT). Novel treatments such as radiofrequency ablation (RFA) and percutaneous ultrasound-guided ethanol injection (PUEI) are beginning to gain popularity and have promising early results. A review of the current literature, outcome measurements and a strategy for revision surgery within the central neck compartment are discussed within this manuscript.

  11. A Mathematical Model of Horizontal Wells Productivity and Well Testing Analysis

    OpenAIRE

    LU, Jing

    1998-01-01

    This thesis presents new productivity and well testing formulae of horizontal wells. Taking a horizontal well as a uniform line source, this thesis finds velocity potential formula and the productivity formulae for a horizontal well in an ellipsoid of revolution drainage volume by solving analytically the involved three-dimensional partial differential equations. These formulae can account for the advantages of horizontal wells, and they are more accurate than other f...

  12. Description of calls from private well owners to a national well water hotline, 2013

    Energy Technology Data Exchange (ETDEWEB)

    Ridpath, Alison, E-mail: etf4@cdc.gov [Centers for Disease Control and Prevention, 4770 Buford Hwy, NE, MS-F-60, Chamblee, GA 30341 (United States); Taylor, Ethel [Centers for Disease Control and Prevention, 4770 Buford Hwy, NE, MS-F-60, Chamblee, GA 30341 (United States); Greenstreet, Charlene; Martens, Margaret; Wicke, Heather [Water Systems Council, 1101 30th St NW, Washington, DC 20007 (United States); Martin, Colleen [Centers for Disease Control and Prevention, 4770 Buford Hwy, NE, MS-F-60, Chamblee, GA 30341 (United States)

    2016-02-15

    Water Systems Council (WSC) is a national, non-profit organization providing education and resources to private household well owners. Since 2003, WSC has provided wellcare®, a toll-free telephone hotline to answer questions from the public regarding well stewardship. In order to identify knowledge gaps regarding well stewardship among private well owners, we obtained data from WSC and reviewed calls made during 2013 to wellcare®. WSC records data from each wellcare® call—including caller information, primary reason for call, main use of well water, and if they were calling about a cistern, private well, shared well, or spring. We searched for calls with key words indicating specific contaminants of interest and reviewed primary reasons for calls. Calls classified as primarily testing-related were further categorized depending on whether the caller asked about how to test well water or how to interpret testing results. During 2013, wellcare® received 1100 calls from private well owners who were residents of 48 states. Among these calls, 87 (8%) mentioned radon, 83 (8%) coliforms, 51 (5%) chemicals related to fracking, 34 (3%) arsenic, and 32 (3%) nitrates key words. Only 38% of private well owners reported conducting any well maintenance activities, such as inspecting, cleaning, repairing the well, or testing well water, during the previous 12 months. The primary reason for calls were related to well water testing (n = 403), general information relating to wells (n = 249), contaminants (n = 229), and well water treatment (n = 97). Among calls related to testing, 319 had questions about how to test their well water, and 33 had questions about how to interpret testing results. Calls from private well owners to the wellcare® Hotline during 2013 identified key knowledge gaps regarding well stewardship; well owners are generally not testing or maintaining their wells, have questions about well water testing treatment, and concerns about well water contaminants

  13. Personal Well-Being among Spanish Adolescents

    Directory of Open Access Journals (Sweden)

    FERRAN CASAS

    2012-12-01

    Full Text Available Although results from several samples of 12 to 16-year-old adolescents in Catalonia (region of N.E. Spain, obtained andpublished between 1999 and 2012, suggesting a constant decrease in adolescents’ subjective well-being (SWB with age, untilnow no such data have been available for the general Spanish adolescent population. In this article we present results for arepresentative Spanish sample (N=5934, limited to students in the year of ESO (Educación Secundaria Obligatoria orCompulsory Secondary Education (mean age = 12.09. aims of this article are twofold: (a to validate an adaptationof the PWI for Spanish adolescents of around 12-years-old, which we will call PWI8adp; and (b to identify variables whichshow rences in children’s subjective well-being (SWB – using the PWI8adp as an indicator of SWB – whendichotomically comparing groups or categories of children. With this sample, among other we observe that Spanishadolescents scoring highest in subjective well-being tend to live in semi-urban environments, were born in Spain, have notrepeated a school year, live in only one family household, have two adults at home with paid employment, have parents withsecondary education or higher and have more material and cultural belongings at home compared to children with lower SWB.Furthermore, the adolescents with higher subjective well-being are those that never worry about money, think otherpeople treat them well, feel greater personal safety, feel they are listened to, report doing daily activities together with their family,do physical exercise or sport every day, have been told children have rights, have experienced fewer important recent changes intheir lives and feel their time is well organized.

  14. Soliton mechanics

    CERN Document Server

    Gunasekaran, Sharmila; Kunduri, Hari K

    2016-01-01

    The domain of outer communication of five-dimensional asymptotically flat stationary spacetimes may possess non-trivial 2-cycles (bubbles). Spacetimes containing such 2-cycles can have non-zero energy, angular momenta, and charge even in the absence of horizons. A mass variation formula has been established for spacetimes containing bubbles and possibly a black hole horizon. This `first law of black hole and soliton mechanics' contains new intensive and extensive quantities associated to each 2-cycle. We consider examples of such spacetimes for which we explicitly calculate these quantities and show how regularity is essential for the formulae relating them to hold. We also derive new explicit expressions for the angular momenta and charge for spacetimes containing solitons purely in terms of fluxes supporting the bubbles.

  15. Soliton mechanics

    Science.gov (United States)

    Gunasekaran, Sharmila; Hussain, Uzair; Kunduri, Hari K.

    2016-12-01

    The domain of outer communication of five-dimensional asymptotically flat stationary spacetimes may possess nontrivial 2-cycles (bubbles). Spacetimes containing such 2-cycles can have nonzero energy, angular momenta, and charge even in the absence of horizons. A mass variation formula has been established for spacetimes containing bubbles and possibly a black hole horizon. This "first law of black hole and soliton mechanics" contains new intensive and extensive quantities associated with each 2-cycle. We consider examples of such spacetimes for which we explicitly calculate these quantities and show how regularity is essential for the formulas relating them to hold. We also derive new explicit expressions for the angular momenta and charge for spacetimes containing solitons purely in terms of fluxes supporting the bubbles.

  16. Fracture mechanics

    Science.gov (United States)

    Shannon, John L., Jr.

    1986-01-01

    The application of fracture mechanics to the design of ceramic structures will require the precise measurement of crack growth and fracture resistance of these materials over their entire range of anticipated service temperatures and standardized test methods for making such measurements. The development of a standard test for measuring the plane strain fracture toughness is sought. Stress intensity factor coefficients were determined for three varieties of chevron-notch specimens, and fracture toughness measurements were made on silicon nitrides, silicon carbides, and aluminum oxides to assess the performance of each specimen variety. It was determined that silicon nitride and silicon carbides have flat crack growth resistance curves, but aluminum oxide does not. Additionally, batch-to-batch differences were noticed for the aluminum oxide. Experiments are continuing to explain the rising crack growth resistance and batch-to-batch variations for the aluminum oxide.

  17. Well data summary sheets. Vol. 25. North Sea Wells from outside the Central Graben area

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This twenty-fifth volume of the `Well Data Summary sheets` together with volumes twenty-three, twenty-four and twenty-six which have been prepared concurrently, includes data from wells in the Danish North Sea. With the exception of Alma-1x well in volume 26 and the Gert-4 well in volume 23, all the included wells have been released and can be found in the previous volumes (1-16). The primary purpose of producing these four volumes (23-26) has been to update the previously released wells and produce them in our new format. With the new volumes 23, 24, and 26 together with well data from volumes 17, 18, and 19, all released wells from the Danish Central Graben are updated in our new format. Volume 25 includes Danish North sea wells from outside the Central Graben area. The Ibenholt-1 well and the Felicia-1/1A well included in this regional volume were previously included in volumes 21 and 20 respectively. Minor corrections have been made since the first edition. The `Complete index of released wells` had been updated. Volume 27, 28 and 29 are regional volumes; volume 27 includes well data from Southern Jutland; volumes 28 and 29 cover well data from Northern Jutland. All data from released Danish North Sea wells are included in volumes 17-26 and 30. Data references are made to the revised volumes and not to the original published reference. (au)

  18. Pseudo energy wells in active systems

    CERN Document Server

    Sheshka, Raman; Truskinovsky, Lev

    2015-01-01

    Active stabilization in systems with zero or negative stiffness is an essential element of a wide variety of biological processes. We study a prototypical example of this phenomenon at a micro-scale and show how active rigidity, interpreted as a formation of a pseudo-well in the effective energy landscape, can be generated in an overdamped ratchet-type stochastic system. We link the transition from negative to positive rigidity with correlations in the noise and show that subtle differences in out-of-equilibrium driving may compromise the emergence of a pseudo-well.

  19. Recombination Dynamics in Quantum Well Semiconductor Structures

    Science.gov (United States)

    Fouquet, Julie Elizabeth

    Time-resolved and time-integrated photoluminescence as a function of excitation energy density have been observed in order to study recombination dynamics in GaAs/Al(,x)Ga(,1 -x)As quantum well structures. The study of room temperature photoluminescence from the molecular beam epitaxy (MBE) -grown multiple quantum well structure and photoluminescence peak energy as a function of tem- perature shows that room temperature recombination at excitation densities above the low 10('16) cm('-3) level is due to free carriers, not excitons. This is the first study of time-resolved photoluminescence of impurities in quantum wells; data taken at different emission wave- lengths at low temperatures shows that the impurity-related states at photon energies lower than the free exciton peaks luminesce much more slowly than the free exciton states. Results from a similar structure grown by metal -organic chemical vapor deposition (MOCVD) are explained by saturation of traps. An unusual increase in decay rate observed tens of nanoseconds after excitation is probably due to carriers falling out of the trap states. Since this is the first study of time-resolved photoluminescence of MOCVD-grown quantum well structures, this unusual behavior may be realted to the MOCVD growth process. Further investigations indi- cate that the traps are not active at low temperatures; they become active at approximately 150 K. The traps are probably associated with the (hetero)interfaces rather than the bulk Al(,x)Ga(,1-x)As material. The 34 K photoluminescence spectrum of this sample revealed a peak shifted down by approximately 36 meV from the main peak. Time-resolved and time-integrated photoluminescence results here show that this peak is not a stimulated phonon emission sideband, but rather is an due to an acceptor impurity, probably carbon. Photo- luminescence for excitation above and below the barrier bandgap shows that carriers are efficiently collected in the wells in both single and multiple

  20. Editorial: Well Documented Articles Achieve More Impact

    Directory of Open Access Journals (Sweden)

    Sönke Albers

    2009-05-01

    Full Text Available This issue offers for the first time supplementary material to articles. It consists of Excel files providing data the research is based on, calculation sheets, and optimization tools. Moreover, text files with pseudo code of algorithms and data of instances used for testing these algorithms as well as a video file with a demonstration of the use of a system in experiments are supplied for download. This material facilitates the understanding of the published articles and the replication of their findings to the benefit of scientific progress. And last but not least, such well documented articles will achieve much more impact.

  1. The power of integrating consumerism and wellness.

    Science.gov (United States)

    William, C Sharon; Tacker, Linh

    2010-01-01

    One aspect in our troubling economy that seems to be flourishing is the growing number of employers implementing consumer-driven health (CDH) plans and wellness programs. This article describes the primary areas of participant behavior that consumerism seeks to change and the fundamental factors a "consumer-focused" health care strategy must include. The authors outline issues employers must address when designing a successful incentive program and its accompanying communications strategy. A case study of a company that has a 70% enrollment rate in its CDH plans shows how an integrated consumerism and wellness strategy can slow the rate of health care cost increases for both the employee and employer.

  2. Photonic crystal slab quantum well infrared photodetector

    Science.gov (United States)

    Kalchmair, S.; Detz, H.; Cole, G. D.; Andrews, A. M.; Klang, P.; Nobile, M.; Gansch, R.; Ostermaier, C.; Schrenk, W.; Strasser, G.

    2011-01-01

    In this letter we present a quantum well infrared photodetector (QWIP), which is fabricated as a photonic crystal slab (PCS). With the PCS it is possible to enhance the absorption efficiency by increasing photon lifetime in the detector active region. To understand the optical properties of the device we simulate the PCS photonic band structure, which differs significantly from a real two-dimensional photonic crystal. By fabricating a PCS-QWIP with 100x less quantum well doping, compared to a standard QWIP, we are able to see strong absorption enhancement and sharp resonance peaks up to temperatures of 170 K.

  3. Mechanism of charity activity

    Directory of Open Access Journals (Sweden)

    Roman B. Golovkin

    2015-12-01

    Full Text Available Objective to establish the essential properties of the mechanism of charitable activities and to formulate the concept of quotmechanism of charitable activityquot. Methods the objective of the study is achieved using the complex of methods which are based on the interaction of dialectical and metaphysical analysis the epistemological properties of which allowed to reveal various aspects of the charitable activities mechanism functioning taking into account the principles of comprehensiveness complexity specificity and objectivity of the research. Results the rules are stated of using the term quotmechanismquot to characterize actions of state and law the essence of the charity mechanism is defined the definition of quotthe mechanism of charitable activity quot is formulated. Scientific novelty for the first time at theoretical level in legal science the definition of quotthe mechanism of charitable activityquot is formulated and its essential properties are set. Practical significance the research will contribute to improving the legal regulation in the field of philanthropy as well as to improving the efficiency and quality of charitable activity in the Russian Federation. nbsp

  4. Painful neuropathy: Mechanisms.

    Science.gov (United States)

    Lee-Kubli, Corinne A; Calcutt, Nigel A

    2014-01-01

    Painful neuropathy, like the other complications of diabetes, is a growing healthcare concern. Unfortunately, current treatments are of variable efficacy and do not target underlying pathogenic mechanisms, in part because these mechanisms are not well defined. Rat and mouse models of type 1 diabetes are frequently used to study diabetic neuropathy, with rats in particular being consistently reported to show allodynia and hyperalgesia. Models of type 2 diabetes are being used with increasing frequency, but the current literature on the progression of indices of neuropathic pain is variable and relatively few therapeutics have yet been developed in these models. While evidence for spontaneous pain in rodent models is sparse, measures of evoked mechanical, thermal and chemical pain can provide insight into the pathogenesis of the condition. The stocking and glove distribution of pain tantalizingly suggests that the generator site of neuropathic pain is found within the peripheral nervous system. However, emerging evidence demonstrates that amplification in the spinal cord, via spinal disinhibition and neuroinflammation, and also in the brain, via enhanced thalamic activity or decreased cortical inhibition, likely contribute to the pathogenesis of painful diabetic neuropathy. Several potential therapeutic strategies have emerged from preclinical studies, including prophylactic treatments that intervene against underlying mechanisms of disease, treatments that prevent gains of nociceptive function, treatments that suppress enhancements of nociceptive function, and treatments that impede normal nociceptive mechanisms. Ongoing challenges include unraveling the complexity of underlying pathogenic mechanisms, addressing the potential disconnect between the perceived location of pain and the actual pain generator and amplifier sites, and finding ways to identify which mechanisms operate in specific patients to allow rational and individualized choice of targeted therapies.

  5. Modern mechanical engineering research, development and education

    CERN Document Server

    2014-01-01

    This book covers modern subjects of mechanical engineering such as nanomechanics and nanotechnology, mechatronics and robotics, computational mechanics, biomechanics, alternative energies, sustainability as well as all aspects related with mechanical engineering education. The chapters help enhance the understanding of both the fundamentals of mechanical engineering and its application to the solution of problems in modern industry. This book is suitable for students, both in final undergraduate mechanical engineering courses or at the graduate level. It also serves as a useful reference for academics, mechanical engineering researchers, mechanical, materials and manufacturing engineers, professionals in related with mechanical engineering.

  6. Strength analysis of expandable tubulars for well applications

    Energy Technology Data Exchange (ETDEWEB)

    Aguiar, A.C.C. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil); Fonseca, C.E. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Netto, T.A. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE)

    2008-07-01

    Solid expandable tube technology has many advantages when compared to conventional wells. The expansion of tubes in situ allows developing reserves in many of the challenging scenarios found in oil industry, as pre-salt layer, HPHT wells, deep reservoirs, or ultra-deep water. Besides, this procedure has good compatibility with directional and horizontal wells and facilitates side-tracks operations. Although the expansion of tubes is very attractive, a better understanding of its influence on the tube mechanical strength is necessary. In this work, experimental tests and numerical analyses were performed in order to determine the effect of parameters such as diameter-to-thickness ratio and expansion rate on the collapse resistance of expandable tubes. An experimental apparatus was designed and built to reproduce full-scale tube expansion. Three 2 meter long specimens were expanded 10% their original diameters and subjected to hydrostatic pressure inside a vessel until collapse. Three non-expanded tubes were also tested for comparison. At the same time, non-linear numerical models were developed using the finite element method. After calibration, they were used to further analyze the mechanical behavior of solid expandable tubes and the influence of expansion on its resistance against collapse. (author)

  7. Unconventional neutron sources for oil well logging

    Energy Technology Data Exchange (ETDEWEB)

    Frankle, C.M., E-mail: cfrankle@lanl.gov; Dale, G.E.

    2013-09-21

    Americium–Beryllium (AmBe) radiological neutron sources have been widely used in the petroleum industry for well logging purposes. There is strong desire on the part of various governmental and regulatory bodies to find alternate sources due to the high activity and small size of AmBe sources. Other neutron sources are available, both radiological ({sup 252}Cf) and electronic accelerator driven (D–D and D–T). All of these, however, have substantially different neutron energy spectra from AmBe and thus cause significantly different responses in well logging tools. We report on simulations performed using unconventional sources and techniques to attempt to better replicate the porosity and carbon/oxygen ratio responses a well logging tool would see from AmBe neutrons. The AmBe response of these two types of tools is compared to the response from {sup 252}Cf, D–D, D–T, filtered D–T, and T–T sources. -- Highlights: • AmBe sources are widely used for well logging purposes. • Governmental bodies would prefer to minimize AmBe use. • Other neutron sources are available, both radiological and electronic. • Tritium–tritium spectrum neutrons have similar logging tool response to AmBe. • A tritium–tritium neutron generator may be a viable AmBe replacement.

  8. Spiritual Well-Being; Background [and] Issues.

    Science.gov (United States)

    Moberg, David O.; And Others

    This paper on Spiritual Well-Being provides information for leaders concerned with the problems of older people. The first four sections of the paper discuss: the need for religious organizations and society to develop and promote services and programs that will contribute to the spiritual needs of the elderly; goals proposed by previous groups…

  9. Dimensions of Subjective Well-Being.

    Science.gov (United States)

    Kapteyn, Arie; Lee, Jinkook; Tassot, Caroline; Vonkova, Hana; Zamarro, Gema

    We use two waves of a population based survey (the RAND American Life Panel) to investigate the relations between various evaluative and experienced well-being measures based on the English Longitudinal Study of Aging, the Gallup Wellbeing Index, and a 12-item hedonic well-being module of the Health and Retirement Study. In a randomized set-up we administered several versions of the survey with different response scales. Using factor analysis, we find that all evaluative measures load on the same factor, but the positive and negative experienced affect measures load on different factors. We find evidence of an effect of response scales on both the estimated number of underlying factors and their relations with demographics. We conclude that finer response scales allowing more nuanced answers offer more reliability. The relation of evaluative and experienced measures with demographics are very different; perhaps the most striking aspect is the lack of a consistent relation of experienced well-being measures with income, while evaluative well-being is strongly positively related with income.

  10. Animal behavior and well-being symposium

    NARCIS (Netherlands)

    Koolhaas, J.M.; Reenen, van C.G.

    2016-01-01

    This paper will argue that understanding animal welfare and the individual vulnerability to stress-related disease requires a fundamental understanding of functional individual variation as it occurs in nature as well as the underlying neurobiology and neuroendocrinology. Ecological studies in fe

  11. Simulating liquid loading in gas wells

    NARCIS (Netherlands)

    Schiferli, W.; Belfroid, S.P.C.; Savenko, S.; Veeken, C.A.M.; Hu, B.

    2010-01-01

    This paper describes work performed by the authors over the last several years to better understand the factors affecting the onset of liquid loading. To further improve the prediction of onset of liquid loading, efforts were undertaken to better model the process. Dedicated codes as well as a comme

  12. Well-differentiated liposarcoma of esophagus

    Institute of Scientific and Technical Information of China (English)

    YANG Bin; SHI Pei-zhi; LI Xiao; XU Ru-jun

    2006-01-01

    @@ Gastrointestinal liposarcoma is rare, and the esophagus is the. least common location at which this kind of liposarcoma may occur. We reported a patient with a well-differentiated liposarcoma of esophagus, and discussed the diagnostic utility of these imaging techniques in patient management.

  13. Well-Being on Planet Earth

    Directory of Open Access Journals (Sweden)

    Ed Diener

    2009-12-01

    Full Text Available The Gallup World Poll allows a look at how humanity is flourishing, based on the answers of survey respondents sampled from across the globe. Several conclusions are clear. First, how people are doing depends enormously on the society in which they live, and nations vary from doing very well to extremely poorly. In terms of subjective well-being, nations vary greatly, in both judgments of overall life and in positive and negative emotions. The best predictors of global life judgments were income and ownership of modern conveniences, whereas the best predictors of emotions were social factors such as the control of corruption and being able to count on others, and personal factors such as learning new things and being able to control one’s day. Thus, the answer to the question of whether money makes people happy must be qualified by the measure of well-being that is being used. It is proposed that systematic measures of well-being across and within nations would allow individuals, leaders, and policy makers to make better decisions.

  14. Persuasion = Stating and Arguing Claims Well

    Science.gov (United States)

    Lapp, Diane; Fisher, Douglas

    2012-01-01

    Inside a ninth-grade classroom, we witness one teacher's very intentional instructional attempts that resulted in her students being able to convey well-crafted reasoning and text-supported evidence to mount persuasive arguments. Through personal examples and Internet resources, the teacher concretized pathos, logos, and ethos. The teacher and…

  15. Well Leg Compartment Syndrome After Abdominal Surgery

    DEFF Research Database (Denmark)

    Christoffersen, Jens Krogh; Hove, Lars Dahlgaard; Mikkelsen, Kim Lyngby;

    2016-01-01

    BACKGROUND: Well leg compartment syndrome (WLCS) is a complication to abdominal surgery. We aimed to identify risk factors for and outcome of WLCS in Denmark and literature. METHODS: Prospectively collected claims to the Danish Patient Compensation Association (DPCA) concerning WLCS after abdominal...

  16. Well Waters Fluoride in Enugu, Nigeria

    Directory of Open Access Journals (Sweden)

    ISI Ogbu

    2012-03-01

    Full Text Available Abnormal fluoride levels in drinking water have been associated with adverse health effects. To determine the fluoride content of well waters in Enugu, southeastern Nigeria, water samples from 50 artisan wells chosen by multistage sampling procedure from the 5 zones of Enugu municipality were analyzed in duplicates for their fluoride content. The zonal mean values were 0.60, 0.70, 0.62, 0.62, and 0.63 mg/L for Abakpa Nike, Achara Layout, Obiagu/ Ogui, Trans Ekulu and Uwani, respectively (p<0.05. The mean value for the whole city was 0.63 mg/L. Although, the mean level of fluoride recorded in this study is currently within safe limits (1.5 mg/L, WHO 2011, it is important to monitor continuously the fluoride content of well waters in the municipality in view of the increasing industrial activities going on in the city and heavy reliance on well water for domestic purposes and the widespread use of consumer products containing fluoride.

  17. On the Importance of Well-Being

    DEFF Research Database (Denmark)

    Rodogno, Raffaele

    2008-01-01

    . This charge can be found in the recent work of both Joseph Raz and Thomas Scanlon. According to the latter the concept of well-being plays an unimportant role in an agent’s deliberation. As I will show, to claim this much is to undermine our initial claim; and to do that is to undermine some of the most...

  18. Economic Shocks and Subjective Well-Being

    DEFF Research Database (Denmark)

    Hariri, Jacob Gerner; Bjørnskov, Christian; Justesen, Mogens Kamp

    -treatment respondents, surveyed after the devaluation. Our estimates show that the devaluation had a large and significantly negative effect on individuals’ evaluations of subjective well-being. These results suggest that macroeconomic shocks, such as unanticipated currency devaluations, may have significant short...

  19. Mixed biexcitons in single quantum wells

    DEFF Research Database (Denmark)

    Wagner, Hans Peter; Langbein, Wolfgang Werner; Hvam, Jørn Märcher

    1999-01-01

    Biexcitonic complexes in a ZnSe single quantum well are investigated by spectrally resolved four-wave mixing (FWM). The formation of heavy-heavy-hole XXh and of mixed heavy-light-hole XXm biexcitons showing binding energies of Delta(h) = 4.8 meV and Delta(m)= 2.8 meV is identified by polarization...

  20. Well Spoken: Teaching Speaking to All Students

    Science.gov (United States)

    Palmer, Erik

    2011-01-01

    All teachers at all grade levels in all subjects have speaking assignments for students, but many teachers believe they don't know how to teach speaking, and many even fear public speaking themselves. In his new book, "Well Spoken", veteran teacher and education consultant Erik Palmer shares the art of teaching speaking in any classroom. Teachers…

  1. Well ARMed and FiRM

    DEFF Research Database (Denmark)

    Rasmussen, Kourosh Marjani; Zenios, Stavros A.

    2007-01-01

    of mortgage loans of a homeowner and apply it to data from the Danish market. Even in the presence of mortgage origination costs it is shown that most risk averse homeowners will do well to consider a diversified portfolio of both fixed (FRM) and adjustable (ARM) rate mortgages. This is particularly so if one...

  2. Lead and Drinking Water from Private Wells

    Science.gov (United States)

    ... submit” value=”Submit” /> Healthy Water Home Lead and Drinking Water from Private Wells Recommend on ... remove lead from my drinking water? What is lead? Lead is a naturally occurring bluish-gray metal ...

  3. Does Globalization Affect Human Well-Being?

    Science.gov (United States)

    Tsai, Ming-Chang

    2007-01-01

    The prevailing theorizing of globalization's influence of human well-being suggests to assess both the favorable and unfavorable outcomes. This study formulates a dialectical model, adopts a comprehensive globalization measure and uses a three-wave panel data during 1980-2000 to empirically test direct and indirect effects of global flows' human…

  4. African American Women Counselors, Wellness, and Spirituality

    Science.gov (United States)

    Knowles, Debora; Bryant, Rhonda M.

    2011-01-01

    Given their tremendous professional responsibilities, professional counselors face daunting challenges to remaining healthy and avoiding role stress and overload. This article explores the intersection of race, gender, wellness, and spirituality in the self-care of African American women counselors. The authors give particular attention to…

  5. Well Spoken: Teaching Speaking to All Students

    Science.gov (United States)

    Palmer, Erik

    2011-01-01

    All teachers at all grade levels in all subjects have speaking assignments for students, but many teachers believe they don't know how to teach speaking, and many even fear public speaking themselves. In his new book, "Well Spoken", veteran teacher and education consultant Erik Palmer shares the art of teaching speaking in any classroom. Teachers…

  6. Permanent downhole seismic sensors in flowing wells

    NARCIS (Netherlands)

    Jaques, P.; Ong, H.; Jupe, A.; Brown, I.; Jansenns, M.

    2003-01-01

    It is generally accepted that the 'Oilfield of the Future' will incorporate distributed permanent downhole seismic sensors in flowing wells. However the effectiveness of these sensors will be limited by the extent to which seismic signals can be discriminated, or de-coupled, from flow induced

  7. 76 FR 76295 - Anchorage Regulations; Wells, ME

    Science.gov (United States)

    2011-12-07

    ... rule, call or email Mr. John J. Mauro, Waterways Management Branch Chief, First Coast Guard District; telephone (617) 223-8355, email John.J.Mauro@uscg.mil . If you have questions on viewing or submitting... placed well within the anchorage areas so that no portion of the hull or rigging will at any time...

  8. Towards Understanding Methane Emissions from Abandoned Wells

    Science.gov (United States)

    Reconciliation of large-scale top-down methane measurements and bottom-up inventories requires complete accounting of source types. Methane emissions from abandoned oil and gas wells is an area of uncertainty. This presentation reviews progress to characterize the potential inv...

  9. Promoting wellness of peer providers through coaching.

    Science.gov (United States)

    Brice, George H; Swarbrick, Margaret A; Gill, Kenneth J

    2014-01-01

    Peer wellness coaching is workforce innovation that empowers individuals with mental and substance use disorders to achieve recovery. This article briefly describes how this approach can help peer providers develop self-care skills to improve job tenure and promote satisfaction. Promising results of this new approach are presented.

  10. Career Construction and Subjective Well-Being

    Science.gov (United States)

    Hartung, Paul J.; Taber, Brian J.

    2008-01-01

    Experienced happiness and reported life contentment represent cardinal elements of subjective well-being (SWB). Achieving happiness and contentment with work and other domains, such as love, play, and community, constitute fundamental life goals. Career construction offers a developmental theory of vocational behavior and a career assessment and…

  11. Psychopolitical Validity: Power, Culture, and Wellness

    Science.gov (United States)

    Fisher, Adrian T.; Sonn, Christopher C.

    2008-01-01

    In this commentary, the authors review and critique Prilleltensky's model of psychopolitical validity and wellness. Although the overt recognition of power, oppression, and political forces are viewed most favorably, cautions are also given. Of most importance is the way in which his model is based in an undeclared North American model of…

  12. Spectroscopy of GaAs quantum wells

    Energy Technology Data Exchange (ETDEWEB)

    West, L.C.

    1985-07-01

    A new type of optical dipole transition in GaAs quantum wells has been observed. The dipole occurs between two envelope states of the conduction band electron wavefunction, and is called a quantum well envelope state transition (QWEST). The QWEST is observed by infrared absorption in three different samples with quantum well thicknesses 65, 82, and 92 A and resonant energies of 152, 121, and 108 MeV, respectively. The oscillator strength is found to have values of over 12, in good agreement with prediction. The linewidths are seen as narrow as 10 MeV at room temperature and 7 MeV at low temperature, thus proving a narrow line resonance can indeed occur between transitions of free electrons. Techniques for the proper growth of these quantum well samples to enable observation of the QWEST have also been found using (AlGa)As compounds. This QWEST is considered to be an ideal material for an all optical digital computer. The QWEST can be made frequency matched to the inexpensive Carbon Dioxide laser with an infrared wavelength of 10 microns. The nonlinearity and fast relaxation time of the QWEST indicate a logic element with a subpicosecond switch time can be built in the near future, with a power level which will eventually be limited only by the noise from a lack of quanta to above approximately 10 microwatts. 64 refs., 35 figs., 6 tabs.

  13. Does Globalization Affect Human Well-Being?

    Science.gov (United States)

    Tsai, Ming-Chang

    2007-01-01

    The prevailing theorizing of globalization's influence of human well-being suggests to assess both the favorable and unfavorable outcomes. This study formulates a dialectical model, adopts a comprehensive globalization measure and uses a three-wave panel data during 1980-2000 to empirically test direct and indirect effects of global flows' human…

  14. Global Developments, Markets, and Well-being

    NARCIS (Netherlands)

    Arce, A.M.G.

    2015-01-01

    The relationship among global development, markets, and well-being is an important theoretical and methodologicalassociation to address and analyze theoretical ways of ‘value framing and talking’ among experts, institutions, and people.These relations may take the forms of interfaces, dislocations,

  15. Cybernetic Wellness of the Youth: Psychological Aspect

    Science.gov (United States)

    Zinnatova, Mariya V.; Zeer, Evald F.; Zavyalova, Ekaterina V.; Sorokin, Vladimir ?.; Yudina, Marina S.

    2016-01-01

    The ever more growing relevance of the issue under evaluation is explained by the wide expansion of digital technology that leads to the necessity to ensure cybernetic wellness of the population, especially the young. The goal of this article is to detect the psychological peculiarities of the Internet dependence of the youth. The leading approach…

  16. Asphaltene precipitates in oil production wells

    DEFF Research Database (Denmark)

    Kleinitz, W,; Andersen, Simon Ivar

    1998-01-01

    At the beginning of production in a southern German oil field, flow blockage was observed during file initial stage of production from the oil wells. The hindrance was caused by the precipitation of asphaltenes in the proximity of the borehole and in the tubings. The precipitates were of solid...

  17. Soft sensing for gas-lift wells

    NARCIS (Netherlands)

    Bloemen, H.H.J.; Belfroid, S.P.C.; Sturm, W.L.; Verhelst, F.J.P.C.M.G.

    2006-01-01

    This paper considers the use of extended Kalman filtering as a soft-sensing technique for gas lift wells. This technique is deployed for the estimation of dynamic variables that are not directly measured. Possible applications are the estimation of flow rates from surface and downhole pressure measu

  18. Subjective Well-Being Around Retirement

    NARCIS (Netherlands)

    Abolhassani, Marzieh; Alessie, Rob

    2013-01-01

    This paper studies the effect of both retirement and unemployment on life satisfaction, using subjective satisfaction indicators from the German Socio-Economic Panel. Moreover, we analyze how accurate individuals anticipate changes in satisfaction around retirement, as well as the correlation betwee

  19. Homeownership and subjective well-being

    DEFF Research Database (Denmark)

    Bloze, Gintautas; Skak, Morten

    Favouring homeownership is an important part of housing policies in many countries. Although this may be explained by the preferences of the majority of voters, it may also be because homeownership is believed to have positive effects on individuals’ behaviour and welfare. Previous research seems...... and subjective well-being....

  20. Consortium for Petroleum & Natural Gas Stripper Wells

    Energy Technology Data Exchange (ETDEWEB)

    Morrison, Joel [Pennsylvania State Univ., University Park, PA (United States)

    2011-12-01

    The United States has more oil and gas wells than any other country. As of December 31, 2004, there were more than half a million producing oil wells in the United States. That is more than three times the combined total for the next three leaders: China, Canada, and Russia. The Stripper Well Consortium (SWC) is a partnership that includes domestic oil and gas producers, service and supply companies, trade associations, academia, the Department of Energy’s Strategic Center for Natural Gas and Oil (SCNGO) at the National Energy Technology Laboratory (NETL), and the New York State Energy Research and Development Authority (NYSERDA). The Consortium was established in 2000. This report serves as a final technical report for the SWC activities conducted over the May 1, 2004 to December 1, 2011 timeframe. During this timeframe, the SWC worked with 173 members in 29 states and three international countries, to focus on the development of new technologies to benefit the U.S. stripper well industry. SWC worked with NETL to develop a nationwide request-for-proposal (RFP) process to solicit proposals from the U.S. stripper well industry to develop and/or deploy new technologies that would assist small producers in improving the production performance of their stripper well operations. SWC conducted eight rounds of funding. A total of 132 proposals were received. The proposals were compiled and distributed to an industry-driven SWC executive council and program sponsors for review. Applicants were required to make a formal technical presentation to the SWC membership, executive council, and program sponsors. After reviewing the proposals and listening to the presentations, the executive council made their funding recommendations to program sponsors. A total of 64 projects were selected for funding, of which 59 were fully completed. Penn State then worked with grant awardees to issue a subcontract for their approved work. SWC organized and hosted a total of 14 meetings

  1. Well limit behaviors of term rewriting systems

    Institute of Scientific and Technical Information of China (English)

    MA Shilong; SUI Yuefei; XU Ke

    2007-01-01

    The limit behaviors of computations have not been fully explored.It is necessary to consider such limit behaviors when we consider the properties of infinite objects in computer science,such as infinite logic programs,the symbolic solutions of infinite polynomial equations.Usually,we can use finite objects to approximate infinite objects,and we should know what kinds of infinite objects are approximable and how to approximate them effectively.A sequence {Rκ:κω}of term rewriting systems has the well limit behavior if under the condition that the sequence has the Set-theoretic limit or the distance-based limit,the sequence {Th(Rκ):κ∈ω} of corresponding theoretic closures of Rκ has the set-theoretic or distance-based limit,and limκ→∞ Th(Rκ) is equal to the theoretic closure of the limit of {Rκ:κ∈ω).Two kinds of limits of term rewriting systems are considered:one is based on the set-theoretic limit,the other is on the distance-based limit.It is proved thatgiven a sequence {Rκ:κ∈ω) of term rewriting systems Rκ,if there is a well-founded ordering (-<) on terms such that every Rκ is (-<)-well-founded,and the set-theoretic limit of {Rκ:κ∈ω).exists,then {Rκ:κ∈ω).has the well limit behavior;and if (1) there is a well-founded ordering(-<)on terms such that every Rκ is(-<-well-founded,(2) there is a distance d on terms which is closed under substitutions and contexts and (3) {Rκ:κ∈ω).is Cauchy under d then {Rκ:κ∈ω).has the well limit behavior.The results are used to approximate the least Herbrand models of infinite Horn logic programs and real Horn logic programs,and the solutions and Cr(o)bner bases of (infinite) sets of real polynomials by sequences of (finite) sets of rational polynomials.

  2. WELL TESTING (YOUQIJING CESHI)

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Research of Theory & Method. Trilinear-Flow Well Test Model of Fractured Horizontal Well in Low Permeability Reservoir. 2011,20(5):1 ∽5 Yao Jun, Yin Xiuxing , Fan Dongyan, Sun Zhixue ( China Petroleum University (East China)) According to the characteristics of the threshold pressure gradient for low permeability reservoir, a mathematical model of tri-linear flow unsteady percolation for fractured horizontal well is established; then deduced from its analytical solution in Laplace space. Bottom hole pressure of fractured horizontal wells is got after considering wellbore storage and skin factor by Stehfest numerical inversion and Duhamel principle, finally discussing the influence factors of the bottom hole pressure of fractured horizontal wells . The study result showed that the threshold pressure gradient made the dimensionless pressure and its derivative curves go up in late time, the bigger the threshold pressure gradient , the higher the curve and the earlier the curve going up appears; the fractured conductivity mainly influence the appeared time of bilinear-flow; the fracture radial flow appears only when the fracture interspacing achieves some extent, and the larger the space is, the fracture radial flow lasts longer; storage capacity ratio co influences the hollow's width and depth of the pressure derivative curve , the smaller the co, the wider the deeper hollow; cross-flow coefficient ~, decides the position of hollow, the smaller the λ, the more right-hand the hollow; wellbore storage coefficient CD mainly affects the early freewheeling segment of the curve.

  3. Doublets and other allied well patterns

    Energy Technology Data Exchange (ETDEWEB)

    Brigham, W.E.

    1997-06-01

    Whenever a liquid is injected into an infinite reservoir containing liquid with the same flow properties, the equations of flow are well known. The pressures in such a system vary over time and distance (radius) in ways that depend on the formation and liquid flow properties. Such equations are well known--they form the basis for the voluminous well-testing literature in petroleum engineering and ground water hydrology. Suppose there are two wells--one an injector and one a producer--with identical rates. The behavior of this system can be calculated using superposition; which merely means that the results can be added independently of each other. When this is done, the remarkable result is that after a period of time there is a region that approaches steady state flow. Thereafter, the pressures and flow velocities in this region stay constant. The size of this region increases with time. This ``steady state`` characteristic can be used to solve a number of interesting and useful problems, both in heat transfer and in fluid flow. The heat transfer problems can be addressed because the equations are identical in form. A number of such problems are solved herein for doublet systems. In addition, concepts are presented to help solve other cases that flow logically from the problems solved herein. It is not necessary that only two wells be involved. It turns out that any time the total injection and production are equal, the system approaches steady state. This idea is also addressed in these notes. A number of useful multiwell cases are addressed to present the flavor of such solutions.

  4. Laboratory testing of novel sealant for leaky wells

    Energy Technology Data Exchange (ETDEWEB)

    Bibic, O. [EnCana Corp., Calgary, AB (Canada); Polikar, M. [Alberta Univ., Edmonton, AB (Canada); Boyd, J. [Seal-MastR Systems Ltd., Clagary, AB (Canada)

    2006-07-01

    Abandoned gas wells in western Canada often leak gas to the surface. An experimental study was conducted in order to determine the possibility of using an asphalt-in-water emulsion as sealant for abandoned leaky wells. This is considered a more efficient and cost-effective method to the conventional cement grout barrier. The study objective was to test this new sealant technology proposed by Seal-MastR and to examine the effect of those parameters affecting the placement and fixing of an emulsion in the near well bore matrix, thereby hindering the flow of water or gas. Two types of experiments were conducted as part of this study. The mechanism of the emulsion penetration into the porous matrix was studied making observations of the process in a transparent core holder. The process was investigated using a steel core holder that allows injection of the emulsion at actual well pressures. It was concluded that the asphalt-in-water emulsion technology can be used with success for sealing abandoned gas-leaking wells or water-producing formations. The study also proposed recommendations for field application and suggested areas for further research to improve the process, such as finding the optimum concentration for the surfactant solution pre-flush that would yield the highest penetration, and testing the emulsion in oil-wet or partially oil-wet formation. 4 refs., 3 tabs., 19 figs.

  5. Well-being and the complexity of poverty: A subjective well-being approach

    OpenAIRE

    Rojas, Mariano

    2004-01-01

    This investigation studies human well-being from a subjective well-being approach. On the basis of a Mexican database the investigation shows that there is a weak relationship between subjective well-being and indicators of well-being such as income and consumption. Therefore, subjective well-being provides additional useful information to study human well-being and, in consequence, poverty. Three reasons for the existence of a weak relationship are studied: First, the fact that a person is m...

  6. Respiratory fluid mechanics.

    Science.gov (United States)

    Grotberg, James B

    2011-02-01

    This article covers several aspects of respiratory fluid mechanics that have been actively investigated by our group over the years. For the most part, the topics involve two-phase flows in the respiratory system with applications to normal and diseased lungs, as well as therapeutic interventions. Specifically, the topics include liquid plug flow in airways and at airway bifurcations as it relates to surfactant, drug, gene, or stem cell delivery into the lung; liquid plug rupture and its damaging effects on underlying airway epithelial cells as well as a source of crackling sounds in the lung; airway closure from "capillary-elastic instabilities," as well as nonlinear stabilization from oscillatory core flow which we call the "oscillating butter knife;" liquid film, and surfactant dynamics in an oscillating alveolus and the steady streaming, and surfactant spreading on thin viscous films including our discovery of the Grotberg-Borgas-Gaver shock.

  7. Equine wellness care in ambulatory practice.

    Science.gov (United States)

    Sandoval, Claudia; True, Claudia

    2012-04-01

    Clients want dependable veterinary care and to understand how the services will benefit and meet their horse’s needs. Wellness visits provide ambulatory practitioners with great opportunities to strengthen the doctor-client-patient bond; effective communication with clients during wellness visits, where new literature or facts can be presented, can offer opportunities for demonstrating the value of having the veterinarian maintain a primary role in disease control. The criteria for selecting vaccines, interpreting FECs, and diagnosing dental pathology require the continued need for veterinary involvement. When providing wellness services, veterinarians should discuss those services, the reasons for them, as well as the possibility of adverse reactions. In so doing, the veterinarian is able to clearly distinguish himself or herself from a technician who is merely giving a "shot." Although some of these services can be performed by clients and lay professionals, the knowledge and training that veterinarians bring to these tasks add benefits to the horse beyond the services provided. For example, by targeting treatment and conveying the goals and limitations of FECs and deworming to clients, the speed at which anthelmintic resistance occurs will be diminished, and veterinarians will regain control over equine parasite management. Additional client education, such as demonstrating dental pathology to clients and how veterinary treatment benefits their horse, will not only improve the health of the horse further but also solidify the veterinarian’s role in preventative medicine. While all components of a wellness program were not detailed here, services such as nutritional consultation, blood work, and lameness evaluation should be offered based on the practice’s equine population. With the increasing population of geriatric horses, dentistry, nutrition, blood work, and lameness should be assessed annually or biannually. Each practice has its own set of criteria

  8. Umbilical mechanism

    Science.gov (United States)

    Barron, Daniel R. (Inventor); Jasulaitis, Vytas (Inventor); Morrill, Brion F. (Inventor)

    1995-01-01

    Apparatus is described for automatically mating a pair of connectors and protecting them prior to mating, which minimizes weight and uses relatively simple and reliable mechanisms. Lower and upper connectors (24, 26) are held in lower and upper parts (14, 16) of a housing, with the upper connector mounted on a carrier (32) that is motor driven to move down and mate the connectors. A pair of movable members (36, 38) serve as shields, as coarse alignment aids, and as force transmitters. The movable members are pivotally mounted at the bottom of the upper housing, and as the carrier moves down it pivots the members out of the way. The movable members have socket elements (116) that closely receive pin elements (120) on the lower housing part, to coarsely align the connectors and to react mating and unmating forces between the housings. The carrier has a pair of plate portions (60, 62) with slots (64), and the movable members have cam followers engaged with the slot walls, to move the members with precision. The carrier plate-like portions engage follower members (82) that pivot open lower shield parts (44, 46) covering the lower connector, which is mounted on four stacks of Belleville washers (142).

  9. INDEXING MECHANISM

    Science.gov (United States)

    Kock, L.J.

    1959-09-22

    A device is presented for loading and unloading fuel elements containing material fissionable by neutrons of thermal energy. The device comprises a combination of mechanical features Including a base, a lever pivotally attached to the base, an Indexing plate on the base parallel to the plane of lever rotation and having a plurality of apertures, the apertures being disposed In rows, each aperture having a keyway, an Index pin movably disposed to the plane of lever rotation and having a plurality of apertures, the apertures being disposed in rows, each aperture having a keyway, an index pin movably disposed on the lever normal to the plane rotation, a key on the pin, a sleeve on the lever spaced from and parallel to the index pin, a pair of pulleys and a cable disposed between them, an open collar rotatably attached to the sleeve and linked to one of the pulleys, a pin extending from the collar, and a bearing movably mounted in the sleeve and having at least two longitudinal grooves in the outside surface.

  10. Do Wellness Tourists Get Well? An Observational Study of Multiple Dimensions of Health and Well-Being After a Week-Long Retreat.

    Science.gov (United States)

    Cohen, Marc M; Elliott, Fiona; Oates, Liza; Schembri, Adrian; Mantri, Nitin

    2017-02-01

    Wellness retreats use many complementary and alternative therapies within a holistic residential setting, yet few studies have evaluated the effect of retreat experiences on multiple dimensions of health and well-being, and no published studies have reported health outcomes in wellness tourists. To assess the effect of a week-long wellness-retreat experience in wellness tourists. A longitudinal observational study with outcomes assessed upon arrival and departure and 6 weeks after the retreat. A rural health retreat in Queensland, Australia. A holistic, 1-week, residential, retreat experience that included many educational, therapeutic, and leisure activities and an organic, mostly plant-based diet. Multiple outcome measures were performed upon arrival and departure and 6 weeks after the retreat. These included anthropometric measures, urinary pesticide metabolites, a food and health symptom questionnaire, the Five Factor Wellness Inventory, the General Self Efficacy questionnaire, the Pittsburgh Insomnia Rating Scale, the Depression Anxiety Stress Scale, the Profile of Mood States, and the Cogstate cognitive function test battery. Statistically significant improvements (p < 0.05) were seen in almost all measures (n = 37) after 1 week and were sustained at 6 weeks (n = 17). There were statistically significant improvements (p < 0.001) in all anthropometric measures after 1 week, with reductions in abdominal girth (2.7 cm), weight (1.6 kg), and average systolic and diastolic pressure (-16.1 mmHg and -9.3 mmHg, respectively). Statistically significant improvements (p < 0.05) were also seen in psychological and health symptom measures. Urinary pesticide metabolites were detected in pooled urine samples before the retreat and were undetectable after the retreat. Retreat experiences can lead to substantial improvements in multiple dimensions of health and well-being that are maintained for 6 weeks. Further research that includes objective

  11. Oil Well Top Hole Locations, wells-08-2008, Published in 2008, Duchesne County.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Oil Well Top Hole Locations dataset, was produced all or in part from Other information as of 2008. It is described as 'wells-08-2008'. Data by this publisher...

  12. Oil Well Top Hole Locations, wells-4-2008, Published in 2008, Duchesne County.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Oil Well Top Hole Locations dataset, was produced all or in part from Other information as of 2008. It is described as 'wells-4-2008'. Data by this publisher...

  13. Well data summary sheets. Vol. 27. Released wells from southern Jylland

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This twenty-seventh volume of the `Well Data Summary sheets` includes data from wells in Southern Jutland. With the exception of Loegumkloster-2 all the included wells have been released and can be found in the previous volume (2,8,9,11,15 and 16). The primary purpose of producing this volume has been to update the previously released wells and produce them in our new format. Also this Volume 27 is one of several published or planned regional volumes including well data from onshore Denmark. Volumes 28 and 29 cover well data from Northern Jutland. All data from released Danish North Sea wells are in volumes 17-26 and 30. `Complete index of released wells in volumes 1-30` is included. Data references are made to the new revised volume and not to the original published reference. (au)

  14. Water Well Locations - MO 2010 Public Water System Wells Half-Mile Radius (SHP)

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This shapefile represents a one-half mile radius around public water system (PWS) wells. This data set does not include wells classified as plugged, observation,...

  15. Water Well Locations, Water wells, Published in unknown, Norton County Appraisal Office.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Water Well Locations dataset, was produced all or in part from Other information as of unknown. It is described as 'Water wells'. Data by this publisher are...

  16. Oil Well Top Hole Locations, Oil wells, Published in unknown, Norton County Appraisal Office.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Oil Well Top Hole Locations dataset, was produced all or in part from Other information as of unknown. It is described as 'Oil wells'. Data by this publisher...

  17. Dewatering gas wells with pneumatic pumping equipment

    Energy Technology Data Exchange (ETDEWEB)

    Nickell, R.L.

    1973-01-01

    El Paso Natural Gas Co. has been operating pumping units on gas wells since 1964. At present, the company operates some 69 pumping units in the E. Panhandle field in Texas and the S. Erick field in Oklahoma. Of these 6 are pneumatic units and the remainder is conventional beam type units powered by gas-fueled engines or electric motors. A graphical representation of the data obtained from the El Paso wells in which various lift facilities are installed is included. These data show initial cost, maintenance cost, and lift cost per barrel of (1) gas engine beam unit; (2) electric beam unit; (3) pneumatic unit; (4) gas lift; and (5) intermitter. While not a panacea for all dewatering ills, pneumatic pumping represents an economical tool which may be applied to a wide range of conditions.

  18. Valuation of Geothermal Wells on Real Property

    Energy Technology Data Exchange (ETDEWEB)

    Rafferty, Kevin

    2001-12-01

    The Geo-Heat Center is often contacted by individual property owners, real estate professionals and others for assistance in the evaluation of geothermal resources in real property transactions. This document is a summary of information on the methods we have suggested to approach this situation in the past. The first of these methods is employed in situations in which the geothermal resource is in use serving some application. The second approach is for situations in which there is a known well on the property but it is not currently in use. The information presented here does not address situations in which the property is underlain by suspected geothermal resources for which there is no surface manifestation or existing development. The information contained in this document is intended to address large capacity wells of the type that would be used for commercial geothermal applications.

  19. Life Events and Subjective Well-being

    DEFF Research Database (Denmark)

    Pedersen, Peder J.; Schmidt, Torben Dall

    2014-01-01

    The literature on Happiness and Subjective Well-Being (SWB) has been dominated by studies of the impact from income and labour market status - and the impact on happiness from changes in these determinants. It seems obvious to expect an impact from non-economic factors as well. In the present paper.......The first is the European Community Household Panel (ECHP) with data collected over 8 annual waves from 1994 to 2001 in 15 EU member countries. Observations are available for up to 15 countries with big differences in fertility levels, child care institutions and labour force participation for married women...... background factors. This presents a unique opportunity to combine the cross country perspective in the ECHP data with the possibility presented by the GSOEP of following the impact from giving birth over a significantly longer period including approximately 11.000 households....

  20. Forecasting the wellness of elderly through SNMS

    Science.gov (United States)

    Wu, Yuan; Li, Lingling; Ma, Chao; Li, Lian; Huang, Bingqing; Liu, Li

    2017-03-01

    Accurate and timely information collection is important for physicians to provide prompt and appropriate treatment for patients. In this paper, a smart nursing home monitoring system which can predict the health conditions of the elderly people who live in the nursing home is presented. A framework integrating temporal and spatial contextual information for evaluating the wellness of an elderly has been modeled. A novel activity detection process based on the location information collects by the RFID technology in performing essential daily activities has been designed and developed. A BP neural network is trained using the activity information of the elderly live in the nursing home, wellness models are tested and the results are encouraging.