WorldWideScience

Sample records for mechanical workshop environment

  1. the impacts of auto-mechanic workshops on the environment of ...

    African Journals Online (AJOL)

    Aladesida

    The extents of groundwater and soil pollution arising from auto-mechanic ..... Conductivity is the ability of a solution to pass electric .... processes used at an auto-mechanic workshop, which ... Levels of Heavy Metals in Top Soils of Motor. Parks ...

  2. Characterization of aerosol particles in a mechanical workshop environment

    International Nuclear Information System (INIS)

    Matsuyama, S.; Ishii, K.; Yamazaki, H.; Kikuchi, Y.; Fujiwara, M.; Kawamura, Y.; Yamanaka, K.; Watanabe, M.; Tsuboi, S.; Pelicon, P.; Zitnik, M.

    2008-01-01

    Indoor aerosols are directly affecting human lives. Especially aerosols in workshops, factories, and laboratories, where many chemical substances are used in treatment and production processes, might contain toxic elements: special care must be taken to alleviate air pollution and assure a clean breathing environment for the workers. For this study, size segregated aerosol particle sampling with a cascade impactor was performed in the machine workshop of Jozef Stefan Institute. The samples, collected during weekdays and weekend were analyzed with a microbeam facility at Tohoku University. Bulk PIXE analysis with scanning over the whole sample area was conducted along with multimodal microanalysis with microscopic scanning. Using bulk analysis, high concentrations of Pb and Ba were detected on weekend days, which was related to the removal of an old white paint from the furniture. On weekdays, concentrations of W and of soil origin elements increased, probably because of the machine operations and worker movements. At the same time high concentration of sulfur was detected. A microscopic multimodal analysis shows that it stems from a lubricant oil vapor. The combination of bulk and microanalysis of the size selected samples is an effective approach to aerosol characterization in the working environment. (author)

  3. Mechanisms of Copper Corrosion in Aqueous Environments. A report from the Swedish National Council for Nuclear Waste's scientific workshop, on November 16, 2009

    International Nuclear Information System (INIS)

    2010-01-01

    In 2010 the Swedish Nuclear Fuel and Waste Management Company, SKB, plans to submit its license application for the final repository of spent nuclear fuel. The proposed method is the so-called KBS-3 method and implies placing the spent nuclear fuel in copper canisters, surrounded by a buffer of bentonite clay, at 500 m depth in the bedrock. The site selected by SKB to host the repository is located in the municipality of Oesthammar on the Swedish east coast. The copper canister plays a key role in the design of the repository for spent nuclear fuel in Sweden. The long-term physical and chemical stability of copper in aqueous environments is fundamental for the safety evolution of the proposed disposal concept. However, the corrosion resistance of copper has been questioned by results obtained under anoxic conditions in aqueous solution. These observations caused some head-lines in the Swedish newspapers as well as public and political concerns. Consequently, the Swedish National Council for Nuclear Waste organized a scientific workshop on the issue 'Mechanisms of Copper Corrosion in Aqueous Environments'. The purpose of the workshop was to address the fundamental understanding of the corrosion characteristics of copper regarding oxygen-free environments, and to identify what additional information is needed to assess the validity of the proposed corrosion mechanism and its implication on the containment of spent nuclear fuel in a copper canister. This seminar report is based on the presentations and discussions at the workshop. It also includes written statements by the members of the expert panel

  4. International lighting in controlled environments workshop: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    Lighting is a central and critical aspect of control in environmental research for plant research and is gaining recognition as a significant factor to control carefully for animal and human research. Thus this workshop was convened to reevaluate the technology that is available today and to work toward developing guidelines for the most effective use of lighting in controlled environments with emphasis on lighting for plants but also to initiate interest in the development of improved guidelines for human and animal research. There are a number of established guidelines for lighting in human and animal environments. Development of new lighting guidelines is necessary for three reasons: (1) recent scientific discoveries show that in addition to supporting the sensation of vision, light has profound nonvisual biological and behavioral effects in both animals and humans; (2) federal regulations (EPACT 1992) are requiring all indoor environments to become more energy efficient with a specific emphasis on energy conservation in lighting; (3) lighting engineers and manufacturers have developed a wealth of new light sources and lighting products that can be applied in animal and human environments. The workshop was aimed at bringing together plant scientists and physical scientists to interact in the discussions. It involved participation of biological scientists involved in studying mechanisms of light reactions and those involved in utilizing lighting for production of plants and maintenance of animals in controlled environments. It included participation of physical scientists from universities and government involved in research as well as those from industry involved in producing lamps and in construction of controlled growth facilities. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  5. Mechanisms of Copper Corrosion in Aqueous Environments. A report from the Swedish National Council for Nuclear Waste's scientific workshop, on November 16, 2009

    Energy Technology Data Exchange (ETDEWEB)

    2010-07-01

    In 2010 the Swedish Nuclear Fuel and Waste Management Company, SKB, plans to submit its license application for the final repository of spent nuclear fuel. The proposed method is the so-called KBS-3 method and implies placing the spent nuclear fuel in copper canisters, surrounded by a buffer of bentonite clay, at 500 m depth in the bedrock. The site selected by SKB to host the repository is located in the municipality of Oesthammar on the Swedish east coast. The copper canister plays a key role in the design of the repository for spent nuclear fuel in Sweden. The long-term physical and chemical stability of copper in aqueous environments is fundamental for the safety evolution of the proposed disposal concept. However, the corrosion resistance of copper has been questioned by results obtained under anoxic conditions in aqueous solution. These observations caused some head-lines in the Swedish newspapers as well as public and political concerns. Consequently, the Swedish National Council for Nuclear Waste organized a scientific workshop on the issue 'Mechanisms of Copper Corrosion in Aqueous Environments'. The purpose of the workshop was to address the fundamental understanding of the corrosion characteristics of copper regarding oxygen-free environments, and to identify what additional information is needed to assess the validity of the proposed corrosion mechanism and its implication on the containment of spent nuclear fuel in a copper canister. This seminar report is based on the presentations and discussions at the workshop. It also includes written statements by the members of the expert panel

  6. Workshop III: Improving the Workplace Environment

    Science.gov (United States)

    Gledhill, Igle; Butcher, Gillian

    2015-12-01

    Research has shown that companies with more diversity and a better workplace perform better. So what makes a good workplace in physics, where women and men can work to their full potential? In the Improving the Workplace Environment workshop of the 5th IUPAP International Conference on Women in Physics, participants heard about initiatives taking place in Canada, the UK, Japan, and India to improve the workplace environment and shared good practices from around the world. Some of the less tangible aspects of the workplace environment, such as unconscious bias and accumulation of advantage and disadvantage, were explored.

  7. Designing persuasive interactive environments : a hands-on workshop to explore interactivity and persuasion in design

    NARCIS (Netherlands)

    Rozendaal, Marco; Bekker, Tilde; Vermeeren, Arnold; Kanis, Marije; Aprile, Walter; van der Helm, Aadjan; Middendorf, Wouter

    2012-01-01

    Ambient Intelligent environments are interactive environments that sense human behaviour and can respond intelligently. This workshop explores how interactive environments can be designed with persuasive quality, influencing human experience and behaviour. The workshop follows a

  8. Assessment of trace metals using lichen transplant from automobile mechanic workshop in Ile-Ife metropolis, Nigeria.

    Science.gov (United States)

    Odiwe, Anthony I; Adesanwo, Adeyemi T J; Olowoyo, Joshua O; Raimi, Idris O

    2014-04-01

    The level of air pollution around the automobile mechanic workshops has been generally overlooked. This study, examined the level of trace metals in automobile mechanic workshops and the suitability of using transplanted lichen thalli of Lepraria incana for measuring air pollution in such areas. Samples of the lichen thalli were transplanted into seven different sites and were attached to the bark of trees at each site. The samples were harvested from the sites after 3-month exposure. Concentrations of Pb, Cu, Cd, Fe, Zn, and S content were determined using an atomic absorption spectrophotometer. Results showed that there was a significant difference in the trace metals concentrations across the sites (p trend in the concentration of these heavy metals suggests that activities in these workshops might become a major source of certain heavy metals in the environment and if the pollution activities persist, it might become worrisome over time.

  9. Virtual Learning Environment for Interactive Engagement with Advanced Quantum Mechanics

    Science.gov (United States)

    Pedersen, Mads Kock; Skyum, Birk; Heck, Robert; Müller, Romain; Bason, Mark; Lieberoth, Andreas; Sherson, Jacob F.

    2016-06-01

    A virtual learning environment can engage university students in the learning process in ways that the traditional lectures and lab formats cannot. We present our virtual learning environment StudentResearcher, which incorporates simulations, multiple-choice quizzes, video lectures, and gamification into a learning path for quantum mechanics at the advanced university level. StudentResearcher is built upon the experiences gathered from workshops with the citizen science game Quantum Moves at the high-school and university level, where the games were used extensively to illustrate the basic concepts of quantum mechanics. The first test of this new virtual learning environment was a 2014 course in advanced quantum mechanics at Aarhus University with 47 enrolled students. We found increased learning for the students who were more active on the platform independent of their previous performances.

  10. Workshop on rock mechanics issues in repository design and performance assessment

    International Nuclear Information System (INIS)

    1996-04-01

    The Center for Nuclear Waste Regulatory Analyses organized and hosted a workshop on ''Rock Mechanics Issues in Repository Design and Performance Assessment'' on behalf its sponsor the U.S. Nuclear Regulatory Commission (NRC). This workshop was held on September 19- 20, 1994 at the Holiday Inn Crowne Plaza, Rockville, Maryland. The objectives of the workshop were to stimulate exchange of technical information among parties actively investigating rock mechanics issues relevant to the proposed high-level waste repository at Yucca Mountain and identify/confirm rock mechanics issues important to repository design and performance assessment The workshop contained three technical sessions and two panel discussions. The participants included technical and research staffs representing the NRC and the Department of Energy and their contractors, as well as researchers from the academic, commercial, and international technical communities. These proceedings include most of the technical papers presented in the technical sessions and the transcripts for the two panel discussions

  11. Delivery Mechanisms for Rural Electrification. A report from a workshop

    Energy Technology Data Exchange (ETDEWEB)

    Gullberg, Monica; Ilskog, Elisabeth; Arvidson, Anders; Katyega, Maneno (eds.)

    2004-04-01

    The workshop was attended by 28 participants from Kenya, Mozambique South Africa, Sweden, Tanzania, Uganda, Zambia and Zimbabwe, representing energy service providers (private, public and cooperative), consumer groups, public energy authorities, researchers, consultants, NGOs and the Swedish International Development Cooperation Agency. The topic of the workshop was how different types of electricity delivery mechanisms - i.e. the combination of an energy supply technology and the organisation managing it - can support rural development. Which energy services have high priority for rural development? What are the appropriate delivery mechanisms? How can the expansion of different delivery mechanisms be supported and made to work efficiently? These are some of the key questions that were discussed in the workshop. The objectives of the workshop were to share experiences and develop a better understanding of existing and potential energy delivery mechanisms that contribute to development in rural areas in Eastern and Southern Africa. The workshop was targeted at, amongst others, the authorities which are in the process of being formed, or have recently been formed, to take charge of rural electrification such as the Rural Electrification Agencies and Rural Electrification Funds. Four case studies were presented and discussed to provide an introduction to the topic, and concrete examples of different delivery mechanisms were given to inspire the workshop discussions. Focus group discussions were used to explore the participants perceptions and experience of: (i) what rural development is, (ii) what role energy plays in rural development, (iii) which energy services are important for rural development, (iv) which delivery mechanisms are used and appropriate for different situations of energy service delivery in rural areas, and (v) what the institutional framework requirements are for delivering different types of energy services and supporting different types of

  12. PHOTOVOLTAICS AND THE ENVIRONMENT 1998. REPORT ON THE WORKSHOP PHOTOVOLTAICS AND THE ENVIRONMENT 1999

    Energy Technology Data Exchange (ETDEWEB)

    FTHENAKIS,V.; ZWEIBEL,K.; MOSKOWITZ,P.

    1999-02-01

    The objective of the workshop ``Photovoltaics and the Environment'' was to bring together PV manufacturers and industry analysts to define EH and S issues related to the large-scale commercialization of PV technologies.

  13. Virtual learning environment for interactive engagement with advanced quantum mechanics

    Directory of Open Access Journals (Sweden)

    Mads Kock Pedersen

    2016-04-01

    Full Text Available A virtual learning environment can engage university students in the learning process in ways that the traditional lectures and lab formats cannot. We present our virtual learning environment StudentResearcher, which incorporates simulations, multiple-choice quizzes, video lectures, and gamification into a learning path for quantum mechanics at the advanced university level. StudentResearcher is built upon the experiences gathered from workshops with the citizen science game Quantum Moves at the high-school and university level, where the games were used extensively to illustrate the basic concepts of quantum mechanics. The first test of this new virtual learning environment was a 2014 course in advanced quantum mechanics at Aarhus University with 47 enrolled students. We found increased learning for the students who were more active on the platform independent of their previous performances.

  14. Workshop on rock mechanics issues in repository design and performance assessment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    The Center for Nuclear Waste Regulatory Analyses organized and hosted a workshop on ``Rock Mechanics Issues in Repository Design and Performance Assessment`` on behalf its sponsor the U.S. Nuclear Regulatory Commission (NRC). This workshop was held on September 19- 20, 1994 at the Holiday Inn Crowne Plaza, Rockville, Maryland. The objectives of the workshop were to stimulate exchange of technical information among parties actively investigating rock mechanics issues relevant to the proposed high-level waste repository at Yucca Mountain and identify/confirm rock mechanics issues important to repository design and performance assessment The workshop contained three technical sessions and two panel discussions. The participants included technical and research staffs representing the NRC and the Department of Energy and their contractors, as well as researchers from the academic, commercial, and international technical communities. These proceedings include most of the technical papers presented in the technical sessions and the transcripts for the two panel discussions. Selected papers have been indexed separately for inclusion the Energy Science and Technology Database.

  15. Evaluating a Gender Diversity Workshop to Promote Positive Learning Environments

    Science.gov (United States)

    Burford, James; Lucassen, Mathijs F. G.; Hamilton, Thomas

    2017-01-01

    Drawing on data from an Aotearoa/New Zealand study of more than 230 secondary students, this article evaluates the potential of a 60-min gender diversity workshop to address bullying and promote positive environments for learning. Students completed pre- and postworkshop questionnaires. The authors used descriptive statistics to summarize results…

  16. PREFACE: International Workshop on Statistical-Mechanical Informatics 2008 (IW-SMI 2008)

    Science.gov (United States)

    Hayashi, Masahito; Inoue, Jun-ichi; Kabashima, Yoshiyuki; Tanaka, Kazuyuki

    2009-01-01

    Statistical mechanical informatics (SMI) is an approach that applies physics to information science, in which many-body problems in information processing are tackled using statistical mechanics methods. In the last decade, the use of SMI has resulted in great advances in research into classical information processing, in particular, theories of information and communications, probabilistic inference and combinatorial optimization problems. It is expected that the success of SMI can be extended to quantum systems. The importance of many-body problems is also being recognized in quantum information theory (QIT), for which quantification of entanglement of bipartite systems has recently been almost completely established after considerable effort. SMI and QIT are sufficiently well developed that it is now appropriate to consider applying SMI to quantum systems and developing many-body theory in QIT. This combination of SMI and QIT is highly likely to contribute significantly to the development of both research fields. The International Workshop on Statistical-Mechanical Informatics has been organized in response to this situation. This workshop, held at Sendai International Conference Center, Sendai, Japan, 14-17 September 2008, and sponsored by the Grant-in-Aid for Scientific Research on Priority Areas `Deepening and Expansion of Statistical Mechanical Informatics (DEX-SMI)' (Head investigator: Yoshiyuki Kabashima, Tokyo Institute of Technology) (Project http://dex-smi.sp.dis.titech.ac.jp/DEX-SMI), was intended to provide leading researchers with strong interdisciplinary interests in QIT and SMI with the opportunity to engage in intensive discussions. The aim of the workshop was to expand SMI to quantum systems and QIT research on quantum (entangled) many-body systems, to discuss possible future directions, and to offer researchers the opportunity to exchange ideas that may lead to joint research initiatives. We would like to thank the contributors of the workshop

  17. A Virtual World Workshop Environment for Learning Agile Software Development Techniques

    Science.gov (United States)

    Parsons, David; Stockdale, Rosemary

    2012-01-01

    Multi-User Virtual Environments (MUVEs) are the subject of increasing interest for educators and trainers. This article reports on a longitudinal project that seeks to establish a virtual agile software development workshop hosted in the Open Wonderland MUVE, designed to help learners to understand the basic principles of some core agile software…

  18. Proceedings of Arcom Doctoral Workshop Research Methodology

    OpenAIRE

    Scott, Lloyd

    2018-01-01

    Editorial Editorial Welcome to this special doctoral workshop on Research Methodology which forms part of what is now a well-established support mechanism for researchers in the discipline of the Built Environment and more particularly construction management. The ARCOM doctoral series, around now for some seventeen years, has addressed many of the diverse research areas that PhD researchers in the discipline have chosen to focus on in their doctoral journey. This doctoral workshop has as ...

  19. Workshop on the leaching mechanisms of nuclear-waste forms, October 27-28, 1981. Summary report

    International Nuclear Information System (INIS)

    Mendel, J.E.

    1982-04-01

    The purpose of this informal workshop was to initiate the program and achieve the following goals: (1) acquaint laboratory investigators (data generators) with the needs of the mathematical modelers (data users). Session I was devoted to a tutorial by D.D. Jackson, mathematical modeler for the leaching mechanisms program, on PROTOCOL, a general case waste form leaching model; (2) define important testing parameters, based on the present state of knowledge. To achieve this, a number of important testing parameters were identified for special discussion in Session II; (3) develop an understanding of the interrelationships between the activities of leaching mechanisms program participants, and begin definition of the specific role of each participant in the overall program; and (4) establish good communication between the leaching mechanisms program and related programs, particularly the waste form leaching program at the Savannah River Laboratory (SRL) and the various Nuclear Waste Terminal Storage (NWTS) waste package programs. The agenda for the workshop is attached as Appendix A; a list of attendees is in Appendix B. Because this workshop was devoted to preliminary planning for the leaching mechanisms program, the presentations and discussions were purposely kept informal. This report represents a synopsis of the proceedings that has been prepared by the leaching mechanisms coordinator and reviewed by the workshop participants

  20. EDITORIAL: The 19th MicroMechanics Europe Workshop (MME 2008) The 19th MicroMechanics Europe Workshop (MME 2008)

    Science.gov (United States)

    Schnakenberg, Uwe

    2009-07-01

    This special issue of Journal of Micromechanics and Microengineering is devoted to the 19th MicroMechanics Europe Workshop (MME 08), which took place at the RWTH Aachen University, Aachen, Germany, from 28-30 September, 2008. The workshop is a well recognized and established European event in the field of micro system technology using thin-film technologies for creating micro components, micro sensors, micro actuators, and micro systems. The first MME Workshop was held 1989 in Enschede (The Netherlands) and continued 1990 in Berlin (Germany), 1992 in Leuven (Belgium), and then was held annually in Neuchâtel (Switzerland), Pisa (Italy), Copenhagen (Denmark), Barcelona (Spain), Southampton (UK), Ulvik in Hardanger (Norway), Gif-sur-Yvette (France), Uppsala (Sweden), Cork (Ireland), Sinaia (Romania), Delft (The Netherlands), Leuven (Belgium), Göteborg (Sweden), Southampton (UK), and in Guimarães (Portugal). The two day workshop was attended by 180 delegates from 26 countries all over Europe and from Armenia, Austria, Bulgaria, Canada, China, Cuba, Iran, Japan, Korea, Malaysia, Taiwan, Turkey, and the United States of America. A total of 97 papers were accepted for presentation and there were a further five keynote presentations. I am proud to present 22 high-quality papers from MME 2008 selected for their novelty and relevance to Journal of Micromechanics and Microengineering. All the papers went through the regular reviewing procedure of IOP Publishing. I am eternally grateful to all the referees for their excellent work. I would also like to extend my thanks to the members of the Programme Committee of MME 2008, Dr Reinoud Wolffenbuttel, Professor José Higino Correia, and Dr Patrick Pons for pre-selection of the papers as well as to Professor Robert Puers for advice on the final selection of papers. My thanks also go to Dr Ian Forbes of IOP Publishing for managing the entire process and to the editorial staff of Journal of Micromechanics and Microengineering. I

  1. ICMS Workshop on Differential Geometry and Continuum Mechanics

    CERN Document Server

    Grinfeld, Michael; Knops, R

    2015-01-01

    This book examines the exciting interface between differential geometry and continuum mechanics, now recognised as being of increasing technological significance. Topics discussed include isometric embeddings in differential geometry and the relation with microstructure in nonlinear elasticity, the use of manifolds in the description of microstructure in continuum mechanics, experimental measurement of microstructure, defects, dislocations, surface energies, and nematic liquid crystals. Compensated compactness in partial differential equations is also treated. The volume is intended for specialists and non-specialists in pure and applied geometry, continuum mechanics, theoretical physics, materials and engineering sciences, and partial differential equations. It will also be of interest to postdoctoral scientists and advanced postgraduate research students. These proceedings include revised written versions of the majority of papers presented by leading experts at the ICMS Edinburgh Workshop on Differential G...

  2. Workshop: Market Mechanisms and Incentives: Applications to Environmental Policy (2006-part 2)

    Science.gov (United States)

    Two-day workshop co-sponsored by EPA's National Center for Environmental Economics and National Center for Environmental Research - research presented on EPA programs and discussed pending legislation related to market mechanisms and incentives.

  3. Workshop: Market Mechanisms and Incentives: Applications to Environmental Policy (2003-part 1)

    Science.gov (United States)

    Two-day workshop co-sponsored by EPA's National Center for Environmental Economics and National Center for Environmental Research - research presented on EPA programs and discussed pending legislation related to market mechanisms and incentives.

  4. Second workshop of I.A.G./A.I.G. SEDIBUD - Sediment Budgets in Cold Environments: Sediment fluxes and sediment budgets in changing high-latitude and high-altitude cold environments

    Energy Technology Data Exchange (ETDEWEB)

    Beylich, Achim A; Lamoureux, Scott F; Decaulne, Armelle

    2007-07-01

    This Second Workshop of the I.A.G./A.I.G. Working Group SEDIBUD (Sediment Budgets in Cold Environments) builds on four previous ESF SEDIFLUX Science Meetings held in Saudarkrokur (Iceland) in June 2004, Clermont-Ferrand (France) in January 2005, Durham (UK) in December 2005 and Trondheim (Norway) in the end of October/beginning of November 2006. A first kick-off Meeting of the new I.A.G./A.I.G. SEDIBUD Workshop. The theme of this Second I.A.G./A.I.G. SEDIBUD Workshop is Sediment FLuxes and Sediment Budgets in Changing High-Latitude Cold Environments. The Workshop is split between scientific paper and poster presentations, presentation and discussion of SEDIBUD key test sites, discussions within defined work groups and guided field trip to Kaerkevagge. This workshop will address the key aim of SEDIBUD to discuss Source-to-Sink-Fluxes and Sediment Budgets in Changing Cold Environments. Major emphasis will be given to consequences of climate change, scaling issues and source-to-sink correlations. Central issues will be presentation and discussion of the SEDIFLUX Manual (First Edition), the selection of SEDIBUD key test sites, the discussion and development of further ideas to extend the scientific activities within SEDIBUD in a global framework.(auth)

  5. Assessing the Effects of Mechanic Activities on Uyo Air Environment ...

    African Journals Online (AJOL)

    Prior to the advancement of science and technology, our air was fresh, and wholesome. Expansion in the economic sector one of which is mechanic workshops brought along with it advantages and disadvantages, one of which is air pollution. Activities carried out in these workshops included engine repairs, paneling, open ...

  6. Engineered Barrier System - Mechanical Integrity of KBS-3 Spent Fuel Canisters. Report from a Workshop. Synthesis and extended abstracts

    Energy Technology Data Exchange (ETDEWEB)

    2007-09-15

    SKI is preparing to review the license applications being developed by the Swedish Nuclear Fuel and Waste Management Company (SKB) for a final repository for the geological disposal of spent nuclear fuel in the year 2009. As part of its preparation, SKI is conducting a series of technical workshops on key aspects of the Engineered Barrier System (EBS). The workshop reported here mainly dealt with the mechanical integrity of KBS-3 spent fuel canisters. This included assessment and review of various loading conditions, structural integrity models and mechanical properties of the copper shell and the cast iron insert. Degradation mechanisms such as stress corrosion cracking and brittle creep fracture were also briefly addressed. Previous workshops have addressed the overall concept for long-term integrity of the EBS, the manufacturing, testing and QA of the EBS, the performance confirmation for the EBS, long-term stability of the buffer and the backfill, corrosion properties of copper canisters and the spent fuel dissolution and source term modelling. The goal of ongoing review work in connection of the workshop series is to achieve a comprehensive overview of all aspects of SKB's EBS and spent fuel work prior to the handling of the forthcoming license application. This report aims to summarise the issues discussed at the workshop and to extract the essential viewpoints that have been expressed. The report is not a comprehensive record of all the discussions at the workshop, and individual statements made by workshop participants should be regarded as personal opinions rather than SKI viewpoints. Results from the EBS workshops series will be used as one important basis in future review work. This reports includes in addition to the workshop synthesis, questions to SKB identified prior to the workshop, and extended abstracts for introductory presentations

  7. 6th COSTAM/SFRR (ASEAN/Malaysia) International Workshop on Micronutrients, Oxidative Stress, and the Environment.

    Science.gov (United States)

    Nesaretnam, Kalanithi; Sies, Helmut

    2006-01-01

    The 6(th) COSTAM/SFRR (ASEAN/Malaysia) workshop, "Micronutrients, Oxidative Stress, and the Environment," was held from June 29 to July 2 at Holiday Inn Damai Beach Resort in Kuching, Sarawak. Two hundred twenty participants from 17 countries presented recent advances on natural antioxidants in the area of oxidative stress and molecular aspects of nutrition. Natural products and research are an important program in academic institutions and are experiencing unprecedented interest and growth by the scientific community and public health authorities. Progress is being driven by better understanding of the molecular mechanisms of the relation between oxidative stress and micronutrient action. The gathering of scientists from around the world was fruitful, and we hope that future work will be developed by the formal and informal interactions that took place in this beautiful tropical setting.

  8. Report of the Orientation Workshop

    DEFF Research Database (Denmark)

    Nunez, Heilyn Camacho; Buus, Lillian; Ogange, Betty

    2014-01-01

    This Orientation Workshops is part of MAAGART project. The workshop is divided in three parts: 1) pre-Orientation Workshop stage, 2) Face-to-Face stage and 3) post-Orientation stage. Pre and post stages will be developed online. All the activities will take place in a virtual learning environment...... created for this purpose. Participants will receive all the information about how to access the virtual learning environment (Moodle) prior to the pre-orientation workshop. In this report we cover only the two first stages. Jørgen Bang, as a part of the Community of Practice activity, will be facilitating...

  9. System Software and Tools for High Performance Computing Environments: A report on the findings of the Pasadena Workshop, April 14--16, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Sterling, T. [Universities Space Research Association, Washington, DC (United States); Messina, P. [Jet Propulsion Lab., Pasadena, CA (United States); Chen, M. [Yale Univ., New Haven, CT (United States)] [and others

    1993-04-01

    The Pasadena Workshop on System Software and Tools for High Performance Computing Environments was held at the Jet Propulsion Laboratory from April 14 through April 16, 1992. The workshop was sponsored by a number of Federal agencies committed to the advancement of high performance computing (HPC) both as a means to advance their respective missions and as a national resource to enhance American productivity and competitiveness. Over a hundred experts in related fields from industry, academia, and government were invited to participate in this effort to assess the current status of software technology in support of HPC systems. The overall objectives of the workshop were to understand the requirements and current limitations of HPC software technology and to contribute to a basis for establishing new directions in research and development for software technology in HPC environments. This report includes reports written by the participants of the workshop`s seven working groups. Materials presented at the workshop are reproduced in appendices. Additional chapters summarize the findings and analyze their implications for future directions in HPC software technology development.

  10. Proceedings: 1991 EPRI workshop on secondary-side intergranular corrosion mechanisms

    International Nuclear Information System (INIS)

    Partridge, M.J.; Zemitis, W.S.

    1992-08-01

    A workshop on ''Secondary-Side Intergranular Corrosion Mechanisms'' was organized by EPRI as an effort to give those working in this area an opportunity to share their results, ideas, and plans. Topics covered included: (1) caustic induced intergranular attack/stress corrosion cracking (IGA/IGSCC), (2) plant experience, (3) boric acid as an IGA/IGSCC remedial measure, (4) lead induced IGA/IGSCC, and (5) acid induced IGA/IGSCC

  11. Materials Characterization Center workshop on leaching mechanisms of nuclear waste forms, May 19-21, 1982, Gaithersburg, Maryland. Summary report

    Energy Technology Data Exchange (ETDEWEB)

    Mendel, J.E. (comp.)

    1982-08-01

    This is a report of the second workshop on the leaching mechanism of nuclear waste forms, which was held at Geithersburg, Maryland, May 19-21, 1982. The first session of the workshop was devoted to progress reports by participants in the leaching mechanisms program. These progress reports, as prepared by the participants, are given in Section 3.0. The goal of the remainder of the workshop was to exchange information on the development of repository-relevant leach testing techniques, often called interactions testing. To this end, a wide spectrum of investigators, many of whose work is sponsored by DOE's Nuclear Waste Terminal Storage (NWTS) project, made presentations at the workshop. These presentations were a significant and beneficial part of the workshop and are summarized in Sections 4.0, 5.0 and 6.0 according to the workshop agenda topics. In many cases, the presenters provided a written version of their presentation which has been included verbatim; in the other cases, the workshop chairman has supplied a brief synopsis. Twenty-one papers have been abstracted and indexed for inclusion in the data base.

  12. Proceedings of the NASA workshop on atomic oxygen effects

    International Nuclear Information System (INIS)

    Brinza, D.E.

    1987-06-01

    A workshop was held to address the scientific issues concerning the effects of atomic oxygen on materials in the low Earth orbital (LEO) environment. The program included 18 invited speakers plus contributed posters covering topics such as LEO spaceflight experiments, interaction mechanisms, and atomic oxygen source development. Discussion sessions were also held to organize a test program to evaluate atomic oxygen exposure facilities. The key issues raised in the workshop were: (1) the need to develop a reliable predictive model of the effects of long-term exposure of materials to the LEO environment; (2) the ability of ground-based exposure facilities to provide useful data for development of durable materials; and (3) accurate determination of the composition of the LEO environment. These proceedings include the invited papers, the abstracts for the contributed posters, and an account of the test program discussion sessions

  13. NATO Advanced Research Workshop on the Mechanisms of Reactions of Organometallic Compounds with Surfaces

    CERN Document Server

    Williams, J

    1989-01-01

    A NATO Advanced Research Workshop on the "Mechanisms of Reactions of Organometallic Compounds with Surfaces" was held in St. Andrews, Scotland in June 1988. Many of the leading international researchers in this area were present at the workshop and all made oral presentations of their results. In addition, significant amounts of time were set aside for Round Table discussions, in which smaller groups considered the current status of mechanistic knowledge, identified areas of dispute or disagreement, and proposed experiments that need to be carried out to resolve such disputes so as to advance our understanding of this important research area. All the papers presented at the workshop are collected in this volume, together with summaries of the conclusions reached at the Round Table discussions. The workshop could not have taken place without financial support from NATO, and donations were also received from Associated Octel, Ltd., STC Ltd., and Epichem Ltd., for which the organisers are very grateful. The orga...

  14. NATO Advanced Research Workshop, 19-22 May 1997: Rapid Method for Monitoring the Environment for Biological Hazards

    National Research Council Canada - National Science Library

    1997-01-01

    The NATO Advanced Research Workshop met for the purpose of bringing to light rapid methods for monitoring the environment for biological hazards such as biological warfare agents, naturally occurring...

  15. Collaborative Problem-Solving Environments; Proceedings for the Workshop CPSEs for Scientific Research, San Diego, California, June 20 to July 1, 1999

    Energy Technology Data Exchange (ETDEWEB)

    Chin, George

    1999-01-11

    A workshop on collaborative problem-solving environments (CPSEs) was held June 29 through July 1, 1999, in San Diego, California. The workshop was sponsored by the U.S. Department of Energy and the High Performance Network Applications Team of the Large Scale Networking Working Group. The workshop brought together researchers and developers from industry, academia, and government to identify, define, and discuss future directions in collaboration and problem-solving technologies in support of scientific research.

  16. Summary review of rock mechanics workshop on radioactive waste disposal

    International Nuclear Information System (INIS)

    Carter, N.L.; Goodman, R.E.; Merrill, R.H.

    1977-01-01

    Presentations, critiques and recommendations for the disposal of commercial radioactive waste based upon an analysis of the information presented at the Rock Mechanics Review/Workshop, Denver, Colorado, December 16-17, 1976 are summarized. The workshop, comprised of both formal and informal sessions, with about 50 participants, was hosted by RE/SPEC Inc. and Dr. Paul F. Gnirk, President and was sponsored by the Office of Waste Isolation (OWI), led by Dr. William C. McClain. The panel of reviewers, responsible for this report, consisted of Neville L. Carter, Richard E. Goodman, and Robert H. Merrill. These panel members were selected not only on the basis of their experience in various aspects of Rock Mechanics and Mining Engineering but also because they have had no previous active participation in problems concerning disposal of radioactive waste. By way of a general comment, the review panel was very favorably impressed with the Rock Mechanics research efforts, supported by OWI, on this problem and with the level of technical competence of those carrying out the research. Despite the rather preliminary nature of the results presented and the youth of the program itself, it is clear that the essential ingredients for a successful program are at hand, especially as regards disposal in natural salt formations. These include laboratory studies of appropriate rock deformation, numerical analyses of thermal and mechanical stresses around openings, and in situ field tests. We shall comment on each of these three major areas in turn. We shall then offer recommendations for their improvement, and, finally, we shall make more general recommendations for future considerations of the OWI radioactive waste disposal program

  17. Report on the SNL/AWE/NSF international workshop on joint mechanics, Dartington, United Kingdom, 2729 April 2009.

    Energy Technology Data Exchange (ETDEWEB)

    Ewins, David J. (University of Bristol, UK); Bergman, Lawrence A. (University of Illinois, Urbana, IL); Segalman, Daniel Joseph

    2010-08-01

    The SNL/AWE joint mechanics workshop, held in Dartington Hall, Totnes, Devon, UK 26-29 April 2009 was a follow up to another international joints workshop held in Arlington, Virginia, in October 2006. The preceding workshop focused on identifying what length scales and interactions would be necessary to provide a scientific basis for analyzing and understanding joint mechanics from the atomistic scale on upward. In contrast, the workshop discussed in this report, focused much more on identification and development of methods at longer length scales that can have a nearer term impact on engineering analysis, design, and prediction of the dynamics of jointed structures. Also, the 2009 meeting employed less technical presentation and more break out sessions for developing focused strategies than was the case with the early workshop. Several 'challenges' were identified and assignments were made to teams to develop approaches to address those challenges.

  18. Gene-Environment Interplay in Common Complex Diseases: Forging an Integrative Model—Recommendations From an NIH Workshop

    Science.gov (United States)

    Bookman, Ebony B.; McAllister, Kimberly; Gillanders, Elizabeth; Wanke, Kay; Balshaw, David; Rutter, Joni; Reedy, Jill; Shaughnessy, Daniel; Agurs-Collins, Tanya; Paltoo, Dina; Atienza, Audie; Bierut, Laura; Kraft, Peter; Fallin, M. Daniele; Perera, Frederica; Turkheimer, Eric; Boardman, Jason; Marazita, Mary L.; Rappaport, Stephen M.; Boerwinkle, Eric; Suomi, Stephen J.; Caporaso, Neil E.; Hertz-Picciotto, Irva; Jacobson, Kristen C.; Lowe, William L.; Goldman, Lynn R.; Duggal, Priya; Gunnar, Megan R.; Manolio, Teri A.; Green, Eric D.; Olster, Deborah H.; Birnbaum, Linda S.

    2011-01-01

    Although it is recognized that many common complex diseases are a result of multiple genetic and environmental risk factors, studies of gene-environment interaction remain a challenge and have had limited success to date. Given the current state-of-the-science, NIH sought input on ways to accelerate investigations of gene-environment interplay in health and disease by inviting experts from a variety of disciplines to give advice about the future direction of gene-environment interaction studies. Participants of the NIH Gene-Environment Interplay Workshop agreed that there is a need for continued emphasis on studies of the interplay between genetic and environmental factors in disease and that studies need to be designed around a multifaceted approach to reflect differences in diseases, exposure attributes, and pertinent stages of human development. The participants indicated that both targeted and agnostic approaches have strengths and weaknesses for evaluating main effects of genetic and environmental factors and their interactions. The unique perspectives represented at the workshop allowed the exploration of diverse study designs and analytical strategies, and conveyed the need for an interdisciplinary approach including data sharing, and data harmonization to fully explore gene-environment interactions. Further, participants also emphasized the continued need for high-quality measures of environmental exposures and new genomic technologies in ongoing and new studies. PMID:21308768

  19. Designing ee-Learning Environments: Lessons from an Online Workshop

    Science.gov (United States)

    Godwin, Lindsey; Kaplan, Soren

    2008-01-01

    Based on their work leading three experiential, online workshops with over 180 participants from around the world, Lindsey Godwin and Soren Kaplan share reflections on designing and conducting successful ee-learning courses. The workshops sought to translate a popular face-to-face seminar in appreciative inquiry, an increasingly popular…

  20. Workshop proceedings: "We are the Olifants" - Key stakeholder workshop for the Upper Olifants River study

    CSIR Research Space (South Africa)

    Funke, Nicola S

    2013-03-31

    Full Text Available Project Leader, Natural Resources and the Environment Council for Scientific and Industrial Research March 2013 Workshop Proceedings Page v EXECUTIVE SUMMARY The Upper Olifants Key Stakeholder Workshop took place at the CSIR Knowledge...

  1. Enabling a Secure Environment for Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) Transactions : April 2012 Public Workshop Proceedings

    Science.gov (United States)

    2012-06-08

    This report provides a summary and overview of the Public Workshop entitled, Enabling a Secure Environment for Vehicle-to-Vehicle and Vehicle-to-Infrastructure Transactions, presented by USDOT. The workshop took place on April 19-20, 2012 at th...

  2. Dynamic defense workshop :

    Energy Technology Data Exchange (ETDEWEB)

    Crosby, Sean Michael; Doak, Justin E.; Haas, Jason Juedes.; Helinski, Ryan; Lamb, Christopher C.

    2013-02-01

    On September 5th and 6th, 2012, the Dynamic Defense Workshop: From Research to Practice brought together researchers from academia, industry, and Sandia with the goals of increasing collaboration between Sandia National Laboratories and external organizations, de ning and un- derstanding dynamic, or moving target, defense concepts and directions, and gaining a greater understanding of the state of the art for dynamic defense. Through the workshop, we broadened and re ned our de nition and understanding, identi ed new approaches to inherent challenges, and de ned principles of dynamic defense. Half of the workshop was devoted to presentations of current state-of-the-art work. Presentation topics included areas such as the failure of current defenses, threats, techniques, goals of dynamic defense, theory, foundations of dynamic defense, future directions and open research questions related to dynamic defense. The remainder of the workshop was discussion, which was broken down into sessions on de ning challenges, applications to host or mobile environments, applications to enterprise network environments, exploring research and operational taxonomies, and determining how to apply scienti c rigor to and investigating the eld of dynamic defense.

  3. NATO Advanced Research Workshop on Methods and Mechanisms for Producing Ions from Large Molecules

    CERN Document Server

    Ens, Werner

    1991-01-01

    A NATO Advanced Research Workshop on Methods and Mechanisms for Producing Ions from Large Molecules was held at Minaki Lodge, Minaki, Ontario, Canada, from 24 to 28 June 1990. The workshop was hosted by the time-of-flight group of the Department of Physics at the University of Manitoba, and was attended by 64 invited participants from around the world. Twenty-nine invited talks were given and 19 papers were presented as posters. Of the 48 contributions, 38 are included in these proceedings. The conference was organized to study the rapidly changing field of mass spectrometry of biomolecules. Particle-induced desorption (especially with MeV particles) has been the most effective method of producing molecular ions from biomolecules. An important part of the workshop was devoted to recent developments in this field, particularly to progress in understanding the fundamentals of the desorption process. In this respect, the meeting was similar to previous conferences in Marburg, FRG (1978); Paris, F (1980); Uppsala...

  4. EDITORIAL: Selected papers from the 22nd MicroMechanics and Microsystems Europe Workshop (MME 2011) Selected papers from the 22nd MicroMechanics and Microsystems Europe Workshop (MME 2011)

    Science.gov (United States)

    Ohlckers, Per

    2012-07-01

    three-axis gyroscopes as the most recent 'killer' application. Regardless of application, low cost, high performance and high reliability seem to give us the winning hand leaving competing technology platforms in the dust, for instance in automotive applications. First, I would like to thank the authors of the selected papers for each of their individual excellent contributions. My gratitude also goes to my fellow members in the programme committee (Leon Abelmann, Marin Hill and Martin Hoffmann) for their devotion in the selection of invited speakers and submitted papers, as well as the anonymous JMM reviewers for their careful selection of the final 13 papers included here. Last, but not least, it has been an honour and pleasure for me to collaborate with the editorial staff of Journal of Micromechanics and Microengineering, with the selected best papers presented at MME 2011 included in this special section. This collaboration will continue also for MME 2012, and hopefully also for many future MME workshops. References [1] Morante J R 1997 Preface J. Micromech. Microeng. 7 [2] Evans A G R 1998 Preface J. Micromech. Microeng. 8 [3] Ohlckers P 1999 Introduction J. Micromech. Microeng. 9 [4] Bosseboeuf A 2000 Editorial J. Micromech. Microeng. 10 [5] Hill M 2002 Preface J. Micromech. Microeng. 12 [6] Dascalu D and Muller A 2003 Preface J. Micromech. Microeng. 13 [7] Wolffenbuttel R F 2004 14th Micromechanics Europe Workshop (MME 2003) J. Micromech. Microeng. 14 [8] Puers R 2005 15th European Workshop on Micromechanics (MME 2004) J. Micromech. Microeng. 15 [9] Enoksson P 2006 16th European Workshop on Micromechanics (MME 2005) J. Micromech. Microeng. 16 [10] Morgan H 2007 The 17th European Workshop on Micromechanics (MME 2006) J. Micromech. Microeng. 17 [11] Correia J H 2008 The 18th European Workshop on Micromechanics (MME 2007) J. Micromech. Microeng. 18 060201 [12] Schnakenberg U 2009 The 19th MicroMechanics Europe Workshop (MME 2008) J. Micromech. Microeng. 19 070201

  5. Fruit and vegetable environment, policy, and pricing workshop: introduction to the conference proceedings.

    Science.gov (United States)

    Seymour, Jennifer D; Fenley, Mary Ann; Yaroch, Amy Lazarus; Khan, Laura Kettel; Serdula, Mary

    2004-09-01

    Americans' consumption of fruits and vegetables has increased slightly over the last 10 years, but most people still do not meet the Dietary Guidelines recommendation to consume 5 to 9 servings per day. New and innovative strategies are needed if we are to significantly increase the mean population intake of fruits and vegetables. To help formulate such strategies as well as to evaluate evidence and identify research gaps, the American Cancer Society and the Centers for Disease Control and Prevention convened the Fruit and Vegetable Environment, Policy, and Pricing Workshop, which brought together experts in how environmental change, policy, and pricing affect fruit and vegetable consumption. The papers in this supplement consist of a review of environmental interventions to improve nutrition and papers covering pricing and consumer value and how fruit and vegetable consumption can be promoted at worksites, restaurants, grocery stores and other community settings, and schools. Conclusions from the workshop were that existing intervention strategies need to be evaluated, promising example programs need to be disseminated, and new innovative interventions and programs need to be created and evaluated.

  6. Brainstorming workshop: Improving the section's effectiveness within the organization

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-28

    In response to changing priorities at Ontario Hydro which led to a reduction in the volume of traditional work, the Mechanical Testing and Development Section of Ontario Hydro's Research Division organized a workshop to discuss ways to adapt to the new situation. Ontario Hydro's priorities have shifted away from building new supply and toward improving nuclear plant availability, demand management and non-utility generation, the environment, and the refurbishment of existing facilities. The Research Division must operate in this environment like a business, since it does not have an exclusively assigned mandate. The division has internal and external competitors, operates under financial and staff restraints, and lacks a plan for the future. Recommendations arising from the workshop discussions are outlined in the areas of promotion, potential work areas, existing work areas, and productivity. Major recommendations include establishing a committee to attract work, providing seed money for new work areas, advertising the Section's services and capabilities, and implementing a Section-wide quality program. 1 fig.

  7. Workshop on Two-Phase Fluid Behavior in a Space Environment

    Science.gov (United States)

    Swanson, Theodore D. (Editor); Juhasz, AL (Editor); Long, W. Russ (Editor); Ottenstein, Laura (Editor)

    1989-01-01

    The Workshop was successful in achieving its main objective of identifying a large number of technical issues relating to the design of two-phase systems for space applications. The principal concern expressed was the need for verified analytical tools that will allow an engineer to confidently design a system to a known degree of accuracy. New and improved materials, for such applications as thermal storage and as heat transfer fluids, were also identified as major needs. In addition to these research efforts, a number of specific hardware needs were identified which will require development. These include heat pumps, low weight radiators, advanced heat pipes, stability enhancement devices, high heat flux evaporators, and liquid/vapor separators. Also identified was the need for a centralized source of reliable, up-to-date information on two-phase flow in a space environment.

  8. Evaluation of airborne lead levels in storage battery workshops and some welding environments in Kumasi metropolis in Ghana.

    Science.gov (United States)

    Dartey, E; Adimado, A A; Agyarko, K

    2010-05-01

    Airborne lead levels were assessed in nine workshops, three each from battery, electronic repair, and welding sources within the Kumasi Metropolis in Ghana. Samples were collected at 0, 2.5, and 5.0 m away from the emission source at the workshops during working hours and another at 5.0 m during break hours. Airborne lead particulates were collected and analyzed using the filter membrane technique and flame atomic absorption spectrophotometry, respectively. There were significant differences (p lead levels from the workshops. Workshop 3b produced the highest significant values of air lead concentrations of 2,820.31 +/- 53.89, 2,406.74 +/- 71.87, 754.55 +/- 72.52, and 549.01 +/- 67.30 microg/m(3) at distances of 0, 2.5, 5.0, and 5.0 m (break-time measurement), respectively, while workshop 1w significantly produced the lowest air lead concentration values of 261.06 +/- 21.60, 190.92 +/- 36.90, 86.43 +/- 16.26, and 61.05 +/- 3.88 microg/m(3) at distances of 0, 2.5, 5.0, and 5.0 m (break-time measurement), respectively. The air lead levels reduced with distance from emission source at the workshops. At all the distances of measurement at working hours, the airborne lead levels were higher than the World Health Organization standard of 50 microg/m(3) and exceeded the threshold limit values of 100 to 150 microg/m(3) recommended in most jurisdictions. Workers and people in the immediate environs were exposed to air lead levels that were too high by most international standards, thus posing a serious threat to their health.

  9. Providing a computing environment for a high energy physics workshop

    International Nuclear Information System (INIS)

    Nicholls, J.

    1991-03-01

    Although computing facilities have been provided at conferences and workshops remote from the hose institution for some years, the equipment provided has rarely been capable of providing for much more than simple editing and electronic mail over leased lines. This presentation describes the pioneering effort involved by the Computing Department/Division at Fermilab in providing a local computing facility with world-wide networking capability for the Physics at Fermilab in the 1990's workshop held in Breckenridge, Colorado, in August 1989, as well as the enhanced facilities provided for the 1990 Summer Study on High Energy Physics at Snowmass, Colorado, in June/July 1990. Issues discussed include type and sizing of the facilities, advance preparations, shipping, on-site support, as well as an evaluation of the value of the facility to the workshop participants

  10. Report of a workshop on environment and health. Evaluating European air quality research and translating priorities into actions 19-20 January 2009

    International Nuclear Information System (INIS)

    Taalman, R.; Rushton, E.; Minsavage, G.

    2010-11-01

    Scientists, academics, regulators, and representatives of industry and non-governmental organizations from some 18 countries around the world convened at the Bedford Hotel and Congress Centre, Brussels, Belgium on January 19-20, 2009 to participate in a Workshop on Environment and Health: Evaluating European Air Quality Research and Translating Priorities into Actions. The Workshop was organized by CONCAWE with contributions from the European Commission.s DG Research, Session Chairpersons and other distinguished presenters. The workshop provided scientific updates in a number of key areas including toxicology, epidemiology and exposure assessment of airborne pollutants. Invited platform presentations and submitted posters followed by facilitated discussions amongst participants resulted in a series of recommendations which are summarized in the present report.

  11. NIAID, NIEHS, NHLBI, and MCAN Workshop Report: The indoor environment and childhood asthma-implications for home environmental intervention in asthma prevention and management.

    Science.gov (United States)

    Gold, Diane R; Adamkiewicz, Gary; Arshad, Syed Hasan; Celedón, Juan C; Chapman, Martin D; Chew, Ginger L; Cook, Donald N; Custovic, Adnan; Gehring, Ulrike; Gern, James E; Johnson, Christine C; Kennedy, Suzanne; Koutrakis, Petros; Leaderer, Brian; Mitchell, Herman; Litonjua, Augusto A; Mueller, Geoffrey A; O'Connor, George T; Ownby, Dennis; Phipatanakul, Wanda; Persky, Victoria; Perzanowski, Matthew S; Ramsey, Clare D; Salo, Päivi M; Schwaninger, Julie M; Sordillo, Joanne E; Spira, Avrum; Suglia, Shakira F; Togias, Alkis; Zeldin, Darryl C; Matsui, Elizabeth C

    2017-10-01

    Environmental exposures have been recognized as critical in the initiation and exacerbation of asthma, one of the most common chronic childhood diseases. The National Institute of Allergy and Infectious Diseases; National Institute of Environmental Health Sciences; National Heart, Lung, and Blood Institute; and Merck Childhood Asthma Network sponsored a joint workshop to discuss the current state of science with respect to the indoor environment and its effects on the development and morbidity of childhood asthma. The workshop included US and international experts with backgrounds in allergy/allergens, immunology, asthma, environmental health, environmental exposures and pollutants, epidemiology, public health, and bioinformatics. Workshop participants provided new insights into the biologic properties of indoor exposures, indoor exposure assessment, and exposure reduction techniques. This informed a primary focus of the workshop: to critically review trials and research relevant to the prevention or control of asthma through environmental intervention. The participants identified important limitations and gaps in scientific methodologies and knowledge and proposed and prioritized areas for future research. The group reviewed socioeconomic and structural challenges to changing environmental exposure and offered recommendations for creative study design to overcome these challenges in trials to improve asthma management. The recommendations of this workshop can serve as guidance for future research in the study of the indoor environment and on environmental interventions as they pertain to the prevention and management of asthma and airway allergies. Published by Elsevier Inc.

  12. Summary Report for National Aeronautics Space Administration (NASA) and Centro Para Prevencao da Poluicao (C3P) 2011 International Workshop on Environment and Alternative Energy

    Science.gov (United States)

    Greene, Brian

    2011-01-01

    The C3P &. NASA International Workshop on Environment and Alternative Energy was held on November 15-18, 2011 at the European Space Agency (ESA)'s Research and Technology Centre (ESTEC) in Noordwijk, The Netherlands. The theme of the workshop was "Global Collaboration in Environmental and Alternative Energy Strategies". The workshop was held at ESTEC's conference center. More than 110 individuals from eleven countries attended the workshop. For the first time since the inception of NASA-C3P workshops, a full day was dedicated to a student session. Fifteen students from around the globe gave oral presentations along with poster displays relating to the latest technologies in environmental and alternative energy strategies. Judges from NASA, C3P and ESA awarded plaques to the top three students. In addition to the students, thirty eight U.S. and international subject matter experts presented on the following general environmental-related topics: (1) Hazardous materials management and substitution in support of space operations (2) Emerging renewable and alternative energy technologies (3) Sustainable development and redevelopment (4) Remediation technologies and strategies The workshop also included a panel discussion on the topic of the challenges of operating installations across borders. Throughout the workshop, attendees heard about the scope of environmental and energy challenges that industry and governments face. They heard about technologies for increasing energy efficiency and increasing use of renewable energy. They learned about ways companies and government agencies are using materials, processes, goods and services in a manner more respectful with the environment and in compliance with health and safety rules. The concept of partnerships and their inherent benefits was evidenced throughout the workshop. Partnering is a key aspect of sustainability because sustainable development is complicated. Through formal presentations and side discussions, attendees

  13. Streaming Visual Analytics Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    Cook, Kristin A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burtner, Edwin R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kritzstein, Brian P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Brisbois, Brooke R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Mitson, Anna E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-03-31

    How can we best enable users to understand complex emerging events and make appropriate assessments from streaming data? This was the central question addressed at a three-day workshop on streaming visual analytics. This workshop was organized by Pacific Northwest National Laboratory for a government sponsor. It brought together forty researchers and subject matter experts from government, industry, and academia. This report summarizes the outcomes from that workshop. It describes elements of the vision for a streaming visual analytic environment and set of important research directions needed to achieve this vision. Streaming data analysis is in many ways the analysis and understanding of change. However, current visual analytics systems usually focus on static data collections, meaning that dynamically changing conditions are not appropriately addressed. The envisioned mixed-initiative streaming visual analytics environment creates a collaboration between the analyst and the system to support the analysis process. It raises the level of discourse from low-level data records to higher-level concepts. The system supports the analyst’s rapid orientation and reorientation as situations change. It provides an environment to support the analyst’s critical thinking. It infers tasks and interests based on the analyst’s interactions. The system works as both an assistant and a devil’s advocate, finding relevant data and alerts as well as considering alternative hypotheses. Finally, the system supports sharing of findings with others. Making such an environment a reality requires research in several areas. The workshop discussions focused on four broad areas: support for critical thinking, visual representation of change, mixed-initiative analysis, and the use of narratives for analysis and communication.

  14. Iterative Prototyping of Strategy Implementation Workshop Design

    DEFF Research Database (Denmark)

    Kryger, Anders

    2018-01-01

    Purpose: The purpose of this paper is to demonstrate how a strategy implementation workshop design can be developed and tested while minimizing the time spent on developing the design. Design/methodology/approach: This multiple case study at a diesel engine company shows how iterative prototyping...... can be used to structure the design process of a strategy implementation workshop. Findings: Strategy implementation workshop design can be developed in resource-constrained environments through iterative prototyping of the workshop design. Each workshop iteration can generate value in its own right...... draw on his/her experience as well as add to his/her knowledge base. Originality/value: Introducing iterative prototyping in an organizational context can facilitate fast yet structured development of a rigorous workshop design. Strategy consultants are provided with empirical examples of how...

  15. Collaboration tools for the global accelerator network Workshop Report

    CERN Document Server

    Agarwal, D; Olson, J

    2002-01-01

    The concept of a ''Global Accelerator Network'' (GAN) has been put forward as a means for inter-regional collaboration in the operation of internationally constructed and operated frontier accelerator facilities. A workshop was held to allow representatives of the accelerator community and of the collaboratory development community to meet and discuss collaboration tools for the GAN environment. This workshop, called the Collaboration Tools for the Global Accelerator Network (GAN) Workshop, was held on August 26, 2002 at Lawrence Berkeley National Laboratory. The goal was to provide input about collaboration tools in general and to provide a strawman for the GAN collaborative tools environment. The participants at the workshop represented accelerator physicists, high-energy physicists, operations, technology tool developers, and social scientists that study scientific collaboration.

  16. Collaboration tools for the global accelerator network: Workshop Report

    International Nuclear Information System (INIS)

    Agarwal, Deborah; Olson, Gary; Olson, Judy

    2002-01-01

    The concept of a ''Global Accelerator Network'' (GAN) has been put forward as a means for inter-regional collaboration in the operation of internationally constructed and operated frontier accelerator facilities. A workshop was held to allow representatives of the accelerator community and of the collaboratory development community to meet and discuss collaboration tools for the GAN environment. This workshop, called the Collaboration Tools for the Global Accelerator Network (GAN) Workshop, was held on August 26, 2002 at Lawrence Berkeley National Laboratory. The goal was to provide input about collaboration tools in general and to provide a strawman for the GAN collaborative tools environment. The participants at the workshop represented accelerator physicists, high-energy physicists, operations, technology tool developers, and social scientists that study scientific collaboration

  17. Proceedings of the 36. annual aquatic toxicity workshop

    International Nuclear Information System (INIS)

    Martel, L.; Triffault-Bouchet, G.; Fournier, M.; Campbell, P.G.C.; Pellerin, J.; Lacroix, E.; Burridge, L.E.

    2010-01-01

    This workshop was held to discuss topics related to aquatic and environmental toxicology. Principles, issues, and recent innovations in aquatic toxicology were reviewed. New developments in environmental monitoring were discussed, as well as issues related to environmental regulation. The workshop was attended by a range of stakeholders from governments, universities, and industry. The sessions were entitled: legacy contaminants 1 organics; nanotoxicology; environmental effects monitoring; oil sands; BFR and other emerging contaminants; biomarkers; neuro and endocrine disrupting compounds; remediation of degraded aquatic environments; legacy contaminants 2 hydrocarbons; waterborne and diet-borne metals; water and sediment standards and criteria; pesticides; amphibians and wildlife toxicology; cyanobacteria; amphibians and wildlife toxicology 2; environmental risk assessment; genomics, protemics, and metabolomics; contamination in the Saguenay-St. Lawrence Marine park; legacy contaminants 3 organics and metals; community level indicators; toxicity tests; toxicity mechanisms; areas of concern; general aquatic toxicology; general legacy contaminants; emerging contaminants; cyanobacteria; amphibians and wildlife toxicology 1; omics in aquatic ecotoxicology; organism or population level indicators; and toxicity tests. The workshop featured 250 presentations, of which 24 have been catalogued separately for inclusion in this database. tabs., figs.

  18. Workshop: Community Based Environmental Decision Making, Proceedings of the Fifth Workshop in the Environmental Policy and Economics Workshop Series (2000)

    Science.gov (United States)

    Proceedings from a one-day workshop cosponsored by US EPA Office of Economy and Environment and National Center for Environmental Research and the National Science Foundation Decision, Risk,and Management Science Program on community-based decision making

  19. Workshop on high power ICH antenna designs for high density tokamaks

    International Nuclear Information System (INIS)

    Aamodt, R.E.

    1990-01-01

    A workshop in high power ICH antenna designs for high density tokamaks was held in Boulder, Colorado on January 31 through February 2, 1990. The purposes of the workshop were to: (1) review the data base relevant to the high power heating of high density tokamaks; (2) identify the important issues which need to be addressed in order to ensure the success of the ICRF programs on CIT and Alcator C-MOD; and (3) recommend approaches for resolving the issues in a timely realistic manner. Some specific performance goals for the antenna system define a successful design effort. Simply stated these goals are: couple the specified power per antenna into the desired ion species; produce no more than an acceptable level of rf auxiliary power induced impurities; and have a mechanical structure which safely survives the thermal, mechanical and radiation stresses in the relevant environment. These goals are intimately coupled and difficult tradeoffs between scientific and engineering constraints have to be made

  20. Complex Flow: Workshop Report; January 17-18, 2012, University of Colorado, Boulder

    Energy Technology Data Exchange (ETDEWEB)

    2012-06-01

    The Department of Energy's Wind Program organized a two-day workshop designed to examine complex wind flow into and out of the wind farm environment and the resulting impacts on the mechanical workings of individual wind turbines. An improved understanding of these processes will subsequently drive down the risk involved for wind energy developers, financiers, and owner/operators, thus driving down the cost of energy.

  1. Second Workshop on Mechatronic Systems

    CERN Document Server

    Choley, Jean-Yves; Chaari, Fakher; Jarraya, Abdessalem; Haddar, Mohamed

    2014-01-01

    The book offers a snapshot of the state-of-art in the field of model-based mechatronic system design. It covers topics including machine design and optimization, predictive systems in manufacturing networks, and the development of software for modeling and simulation of processes, which are supplemented by practical case studies. The book is a collection of fifteen selected contributions presented during the Workshop on Mechatronic Systems, held on March 17-19, 2014, in Mahdia, Tunisia. The workshop was jointly organized by the Laboratory of Mechanics Modeling and Production (LA2MP) of the National School of Engineers Sfax, Tunisia, and the Laboratory for Mechanical Systems and Materials Engineering (LISMMA) of Higher Institute of Mechanics (SUPMECA), Paris, France.

  2. National Postirradiation Examination Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    Schulthess, Jason L

    2011-06-01

    A National Post-Irradiation-Examination (PIE) Workshop was held March 29-30, 2011, in Washington D.C., stimulated by the DOE Acting Assistant Secretary for Nuclear Energy approval on January 31, 2011 of the “Mission Need Statement for Advanced Post-Irradiation Examination Capability”. As stated in the Mission Need, “A better understanding of nuclear fuels and material performance in the nuclear environment, at the nanoscale and lower, is critical to the development of innovative fuels and materials required for tomorrow’s nuclear energy systems.” (2011) Developing an advanced post-irradiation capability is the most important thing we can do to advance nuclear energy as an option to meeting national energy goals. Understanding the behavior of fuels and materials in a nuclear reactor irradiation environment is the limiting factor in nuclear plant safety, longevity, efficiency, and economics. The National PIE Workshop is part of fulfilling or addressing Department of Energy (DOE) missions in safe and publically acceptable nuclear energy. Several presentations were given during the opening of the workshop. Generally speaking, these presentations established that we cannot continue to rely on others in the world to provide the capabilities we need to move forward with nuclear energy technology. These presentations also generally identified the need for increased microstructural understanding of fuels and materials to be coupled with modeling and simulation, and increased accessibility and infrastructure to facilitate the interaction between national laboratories and participating organizations. The overall results of the work of the presenters and panels was distilled into four primary needs 1. Understanding material changes in the extreme nuclear environment at the nanoscale. Nanoscale studies have significant importance due to the mechanisms that cause materials to degrade, which actually occur on the nanoscale. 2. Enabling additional proficiency in

  3. Proceedings of the 14. workshop of the Committee on River Ice Processes and the Environment : hydraulics of ice covered rivers

    International Nuclear Information System (INIS)

    Morse, B.; Bergeron, N.; Gauthier, Y.

    2007-01-01

    Ice processes play a significant role in the hydrologic regime of Canadian rivers. The Committee on River Ice Processes and the Environment (CRIPE) identifies high-priority topics for research and development and promotes research programs at Canadian colleges and universities. This workshop reviewed the hydraulic aspects of river ice phenomena in an effort to clarify the effects of ice cover on river flow characteristics. Other issues of concern were also discussed, notably ice formation, ice jams, winter operation of hydroelectric power plants, environmental aspects of river ice, and climate change. The workshop featured 12 poster sessions and 40 presentations, of which 5 have been catalogued separately for inclusion in this database. refs., tabs., figs

  4. Highlights of the Workshop

    Science.gov (United States)

    Noor, Ahmed K.

    1997-01-01

    Economic stresses are forcing many industries to reduce cost and time-to-market, and to insert emerging technologies into their products. Engineers are asked to design faster, ever more complex systems. Hence, there is a need for novel design paradigms and effective design tools to reduce the design and development times. Several computational tools and facilities have been developed to support the design process. Some of these are described in subsequent presentations. The focus of the workshop is on the computational tools and facilities which have high potential for use in future design environment for aerospace systems. The outline for the introductory remarks is given. First, the characteristics and design drivers for future aerospace systems are outlined; second, simulation-based design environment, and some of its key modules are described; third, the vision for the next-generation design environment being planned by NASA, the UVA ACT Center and JPL is presented. The anticipated major benefits of the planned environment are listed; fourth, some of the government-supported programs related to simulation-based design are listed; and fifth, the objectives and format of the workshop are presented.

  5. Complex Flow Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-05-01

    This report documents findings from a workshop on the impacts of complex wind flows in and out of wind turbine environments, the research needs, and the challenges of meteorological and engineering modeling at regional, wind plant, and wind turbine scales.

  6. Advanced Training Technologies and Learning Environments

    Science.gov (United States)

    Noor, Ahmed K. (Compiler); Malone, John B. (Compiler)

    1999-01-01

    This document contains the proceedings of the Workshop on Advanced Training Technologies and Learning Environments held at NASA Langley Research Center, Hampton, Virginia, March 9-10, 1999. The workshop was jointly sponsored by the University of Virginia's Center for Advanced Computational Technology and NASA. Workshop attendees were from NASA, other government agencies, industry, and universities. The objective of the workshop was to assess the status and effectiveness of different advanced training technologies and learning environments.

  7. The future of nuclear weapons in Europe workshop summary

    International Nuclear Information System (INIS)

    Larsen, J.A.; Garrity, P.J.

    1991-12-01

    A summary is presented of a workshop that addressed the future of nuclear weapons in Europe. The workshop topics included the evolving European security environment; the Soviet Union, Eastern Europe, and nuclear weapons; the United States, NATO, and nuclear weapons; and Western Europe and nuclear weapons. The workshop, held at Los Alamos July 26, 1991, was sponsored by the Center for National Security Studies of the Los Alamos National Laboratory

  8. ARCSACC '99: Workshop Proceedings

    International Nuclear Information System (INIS)

    Nahir, M.; Biggar, K.

    1999-01-01

    The assessment and remediation of contaminated sites in cold and Arctic environments is an area of increasing concern, primarily because of the unique problems associated with northern regions. Not only the obvious effects of the cold temperatures on the operation of many systems, but also remedial effectiveness of measures under extreme cold conditions are of interest. Accordingly, this workshop was organized to provide a means of exchange of information among people responsible for cleaning-up contaminated sites in cold and Arctic environments, researchers, and providers of remediation services with experience in dealing with such conditions. Speakers at the workshop addressed problems concerning risk assessment and site characterization, contaminant migration in permafrost, contamination caused by mining and associated clean-up problems, assessed bioremediation as a means of contaminant control, reviewed various remediation technologies and techniques, and presented a number of bioremediation case studies. refs., tabs., figs

  9. International workshop on scientific bases for decision making after a radioactive contamination of an urban environment. Book of abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    This workshop aims to discuss the most important aspects of scientific bases for decision making after a radioactive contamination in urban environment and to identify some scientific, social and economic open questions. Papers explaining in more details the principles of intervention, computational capabilities and measurements after a contamination of urban areas are presented. A review on practical experiences from Chernobyl and Goiania accidents is also included.

  10. International workshop on scientific bases for decision making after a radioactive contamination of an urban environment. Book of abstracts

    International Nuclear Information System (INIS)

    1994-01-01

    This workshop aims to discuss the most important aspects of scientific bases for decision making after a radioactive contamination in urban environment and to identify some scientific, social and economic open questions. Papers explaining in more details the principles of intervention, computational capabilities and measurements after a contamination of urban areas are presented. A review on practical experiences from Chernobyl and Goiania accidents is also included

  11. What future for nuclear power? Workshop report

    International Nuclear Information System (INIS)

    1998-01-01

    A Workshop on this highly controversial subject, organized by the Energy and Environment Programme of the RIIA, was held on 10th November 1997 at Green College, Oxford. The meeting was attended by some forty people from eight countries, coming from the nuclear and electricity generating industry, governments, research organizations, academic institutions, environmental pressure groups and inter-governmental organizations. In addition, subsequent to this Workshop, there have been a number of smaller, more informal discussions on various aspects of the subject. This paper summarizes the main conclusions arising from the Workshop and from these later discussions

  12. NASA Laser Light Scattering Advanced Technology Development Workshop, 1988

    Science.gov (United States)

    Meyer, William V. (Editor)

    1989-01-01

    The major objective of the workshop was to explore the capabilities of existing and prospective laser light scattering hardware and to assess user requirements and needs for a laser light scattering instrument in a reduced gravity environment. The workshop addressed experimental needs and stressed hardware development.

  13. Workshop on Indian Chemical Industry: perspectives on safety, cleaner production and environment production

    NARCIS (Netherlands)

    Ham, J.M.

    1996-01-01

    A Workshop on "Indian Chemical Industry: Perspectives on Safety, Cleaner Production and Environmental Protection" was held on 3, 4 and 5 January 1996, in Bombay, India. The main objective of the workshop, which was organised jointly by the Government of India, UNIDO/UNDP and the Indian Chemical

  14. Proceedings of the Third International Workshop on Jointed Structures.

    Energy Technology Data Exchange (ETDEWEB)

    Starr, Michael James; Brake, Matthew Robert; Segalman, Daniel Joseph; Bergman, Lawrence A.; Ewins, David J.

    2013-08-01

    The Third International Workshop on Jointed Structures was held from August 16th to 17th, 2012, in Chicago Illinois, following the ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Thirty two researchers from both the United States and international locations convened to discuss the recent progress of mechanical joints related research and associated efforts in addition to developing a roadmap for the challenges to be addressed over the next five to ten years. These proceedings from the workshop include the minutes of the discussions and follow up from the 2009 workshop [1], presentations, and outcomes of the workshop. Specifically, twelve challenges were formulated from the discussions at the workshop, which focus on developing a better understanding of uncertainty and variability in jointed structures, incorporating high fidelity models of joints in simulations that are tractable/efficient, motivating a new generation of researchers and funding agents as to the importance of joint mechanics research, and developing new insights into the physical phenomena that give rise to energy dissipation in jointed structures. The ultimate goal of these research efforts is to develop a predictive model of joint mechanics.

  15. CCME Climate Change Indicators -- Workshop Report

    International Nuclear Information System (INIS)

    2000-01-01

    In an effort to give Canadians a better understanding of the climate change issue, in 1999 the Canadian Council of Ministers of the Environment (CCME) established a Project Working Group to identify and assemble a set of climate change indicators that is scientifically valid, useful and meaningful to the public. To ensure the widest possible participation of experts from all parts of the country the Project Working Group convened a two-day workshop in Toronto to take place on the 6th and 7th of November 2000. The outcome of the workshop, summarized in this report, resulted in a 'Made in Canada' framework of indicators for climate change impacts, divided into five categories: physical environment, personal health and safety, jobs and economic well-being, social and community well-being, and eco-system health. The report contains highlights of the discussions. There are seven appendices containing, respectively, a series of pre-workshop suggestions for indicators (Appendix A), the workshop agenda and backgrounder (Appendix B), a list of participants (Appendix C), presentation slides on the Canada country study (Appendix D), existing and proposed climate change indicators (Appendix E), presentation slides on communication issues (Appendix F), and notes summarizing small group discussions, including assessment of the level of interest demonstrated and opinions expressed by group members about the utility and value of each of the proposed indicators (Appendix G)

  16. Risk Management Techniques and Practice Workshop Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    Quinn, T; Zosel, M

    2008-12-02

    vendor technical or business problems. HPC, by its very nature, is an exercise in multi-level risk management. Every aspect of stewarding HPCCs into the petascale era, from identification of the program drivers to the details of procurement actions and simulation environment component deployments, represents unprecedented challenges and requires effective risk management. The fundamental purpose of this workshop was to go beyond risk management processes as such and learn how to weave effective risk management practices, techniques, and methods into all aspects of migrating HPCCs into the next generation of leadership computing systems. This workshop was a follow-on to the Petascale System Integration Workshop hosted by Lawrence Berkeley National Laboratory (LBNL)/NERSC last year. It was intended to leverage and extend the risk management experience of the participants by looking for common best practices and unique processes that have been especially successful. This workshop assessed the effectiveness of tools and techniques that are or could be helpful in HPCC risk management, with a special emphasis on how practice meets process. As the saying goes: 'In theory, there is no difference between theory and practice. In practice there is'. Finally, the workshop brought together a network of experts who shared information as technology moves into the petascale era and beyond.

  17. The Astronomy Workshop

    Science.gov (United States)

    Hamilton, D. P.; Asbury, M. L.; Proctor, A.

    2001-12-01

    The Astronomy Workshop (http://janus.astro.umd.edu) is an interactive online astronomy resource developed, and maintained at the University of Maryland, for use by students, educators and the general public. The Astronomy Workshop has been extensively tested and used successfully at many different levels, including High School and Junior High School science classes, University introductory astronomy courses, and University intermediate and advanced astronomy courses. Some topics currently covered in the Astronomy Workshop are: Animated Orbits of Planets and Moons: The orbits of the nine planets and 91 known planetary satellites are shown in animated, to-scale drawings. The orbiting bodies move at their correct relative speeds about their parent, which is rendered as an attractive, to-scale gif image. Solar System Collisions: This most popular of our applications shows what happens when an asteroid or comet with user-defined size and speed impacts a given planet. The program calculates many effects, including the country impacted (if Earth is the target), energy of the explosion, crater size, magnitude of the planetquake generated. It also displays a relevant image (e.g. terrestrial crater, lunar crater, etc.). Planetary and Satellite Data Calculators: These tools allow the user to easily calculate physical data for all of the planets or satellites simultaneously, making comparison very easy. Orbital Simulations: These tools allow the student to investigate different aspects of the three-body problem of celestial mechanics. Astronomy Workshop Bulletin Board: Get innovative teaching ideas and read about in-class experiences with the Astronomy Workshop. Share your ideas with other educators by posting on the Bulletin Board. Funding for the Astronomy Workshop is provided by the National Science Foundation.

  18. Workshop: High-performance coatings for internal combustion engines; Workshop: Hochleistungsschichten fuer Verbrennungsmotoren

    Energy Technology Data Exchange (ETDEWEB)

    Blau, W. [Foerdergemeinschaft Duenne Schichten e.V., Dresden (Germany). Transferzentrum Oberflaechen- und Schichttechnologie; Lugscheider, E. [Technische Hochschule Aachen (Germany). Lehr- und Forschungsgebiet Werkstoffwissenschaften; Suchentrunk, R. (comps.) [DaimlerChrysler Aerospace AG (Dasa), Muenchen (Germany)

    1999-07-01

    Progress in vehicles is closely related to progress in materials. Engine components must withstand high thermal, corrosive and mechanical loads. The workshop focused on the coating and boundary layer treatment of components especially of piston engines, although gas turbine technology was gone into as well. [German] Fortschritte in der Verkehrstechnik sind oft eng mit Fortschritten in der Werkstofftechnik verknuepft. Besonders hoch sind die Anforderungen hinsichtlich thermischer, korrosiver und mechanischer Belastbarkeit bei Bauteilen von Verbrennungsmotoren. Der Workshop widmet sich ausschliesslich dem Teilgebiet die Beschichtung und Randschichtbehandlung von Bauteilen. Kolbenmotoren stehen im Mittelpunkt, Querverbindungen zur Gasturbinentechnik werden angesprochen. (orig./AKF)

  19. Fusion environment sensitive flow and fracture processes

    International Nuclear Information System (INIS)

    1980-01-01

    As a planning activity, the objectives of the workshop were to list, prioritize and milestone the activities necessary to understand, interpret and control the mechanical behavior of candidate fusion reactor alloys. Emphasis was placed on flow and fracture processes which are unique to the fusion environment since the national fusion materials program must evaluate these effects without assistance from other reactor programs

  20. 75 FR 70015 - External Defibrillators; Public Workshop

    Science.gov (United States)

    2010-11-16

    ... different environments (hospital, community, home)? 4. What features of next generation devices can be... present written material or to make oral presentations at the public workshop, please call the contact...

  1. PREFACE: First International Workshop on Nonequilibrium Processes in Plasma Physics and Studies of Environment

    Science.gov (United States)

    Petrović, Z. Lj; Malović, G.; Tasić, M.; Nikitović, Ž.

    2007-06-01

    This volume is a collection of papers associated with a series of invited lectures presented at the First Workshop on Nonequilibrium processes in Plasma Physics and studies of Environment that was held at Mt Kopaonik in August 2006. The workshop originated as a part of the FP6 COE 026328 which had the basic aim of promoting centers of excellence in Western Balkan countries, to facilitate dissemination of their results and to help them establish themselves in the broader arena of European and international science. So the best way to achieve all those goals was to prepare a workshop associated with the local conference SPIG (Symposium on Physics of Ionized Gases) where the participants could attend sessions in which the host Laboratory presented progress reports and papers and thereby gain a full perspective of our results. At the same time this allowed participants in the COE the opportunity to compare their results with the results of external speakers and to gain new perspectives and knowledge. The program of the workshop was augmented by inviting some of our colleagues who visited the COE in recent years or have an active collaboration with a participating member. In that respect this volume is not only a proceedings of the workshop but a collection of papers related to the topic of the workshop: Non-equilibrium phenomena in plasmas and in the science of our environment. The idea is to offer review articles either summarizing a broader area of published or about to be published work or to give overviews showing preliminary results of the works in progress. The refereeing of the papers consisted of two parts, first in selection of the invitees and second in checking the submitted manuscripts. The papers were refereed to the standard of the Journal. As the program of the COE covers a wide area of topics from application of plasmas in nano- electronics to monitoring and removal of pollutants in the atmosphere, so the program of the workshop covered an even broader

  2. Virtual Environments 2005

    DEFF Research Database (Denmark)

    This book contains the proceedings of the joint 9th International Immersive Projection Technologies Workshop and the 11th EUROGRAPHICS Virtual Environments Workshop (IPTEGVE). The event was held in Aalborg, Denmark the 6. and 7. October 2005. It was organized at the VR Media Lab, Aalborg University...

  3. First Canadian workshop on engineering structural integrity : CWESI. Proceedings

    International Nuclear Information System (INIS)

    2002-01-01

    The First Canadian Workshop on Engineering Structural Integrity (CWESI) was held on October 16 and 17, 2002, in Toronto, Canada. The purpose of the Workshop was to review strategies for ESI in a number of key industries, and to attempt to plot a course for co-operation in ESI activities and implementation of ESI initiatives in Canadian industry, together with support for appropriate educational, research and development activities. The Workshop consisted of presentations by speakers from a number of industries. Presentations focused on in-service experience under service conditions related to the Canadian environment. This Workshop was attended by practising structural integrity engineers, managers with the responsibility for delivery of safe and reliable operation, and researchers in the structural integrity area

  4. Writing Workshop as Carnival: Reflections on an Alternative Learning Environment.

    Science.gov (United States)

    Lensmire, Timothy J.

    Mikhail Bakhtin's understanding of the medieval carnival--a time when life is turned upside down, social hierarchies are lifted, and the lines between performer and participant are blurred--provides a useful framework for understanding both liberatory and potentially threatening aspects of writing workshops in elementary schools. An experimental…

  5. Report of the workshop on Aviation Safety/Automation Program

    Science.gov (United States)

    Morello, Samuel A. (Editor)

    1990-01-01

    As part of NASA's responsibility to encourage and facilitate active exchange of information and ideas among members of the aviation community, an Aviation Safety/Automation workshop was organized and sponsored by the Flight Management Division of NASA Langley Research Center. The one-day workshop was held on October 10, 1989, at the Sheraton Beach Inn and Conference Center in Virginia Beach, Virginia. Participants were invited from industry, government, and universities to discuss critical questions and issues concerning the rapid introduction and utilization of advanced computer-based technology into the flight deck and air traffic controller workstation environments. The workshop was attended by approximately 30 discipline experts, automation and human factors researchers, and research and development managers. The goal of the workshop was to address major issues identified by the NASA Aviation Safety/Automation Program. Here, the results of the workshop are documented. The ideas, thoughts, and concepts were developed by the workshop participants. The findings, however, have been synthesized into a final report primarily by the NASA researchers.

  6. Environmental radioactive monitoring, evaluation and protection in luminous workshops of a factory

    International Nuclear Information System (INIS)

    Dai Hanbin; Xiang Ming; Tan Jianzu

    2009-01-01

    Fluorescent technique is often used to display instrumental indicator in the dark environment. Luminous workshops of a factory smear and depict the glassware by means of fluorescent power with adulterated radioactive matter. Because of adulterated radioactive matters such as 226 Ra, 40 K emit alpha-ray,beta-ray and gamma-ray, while they decay spontaneously, and high dose or cumulative radiation can damage human body in different degrees. Therefore, any radioactive damage to human body caused by over-safety dose should be prevented strictly during the working. To ensure health and safety of working staff in luminous workshop and the public, it is necessary to regularly have radioactive monitoring and evaluation to luminous workshop and its surrounding environment. Through the environment radioactive monitoring, the authors analyze its environmental radioactive level,and try to find out the possible problems so as to propose some protective measures for personal health. (authors)

  7. Proceedings of the Workshop on near-field phenomena in geologic repositories for radioactive waste

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    Prediction of the behaviour of radioactive waste and the geologic host medium is a complex problem, involving an understanding of many chemical and physical phenomena. Topics covered by this Workshop include rock mechanics in stressed and heated conditions; thermally induced groundwater flow in fractured rock; chemical changes to rock surfaces associated with groundwater and changes in the thermal and chemical environment; the chemical solubilities and sorption properties of radionuclides; and the long-term integrity of containers and packaging for radioactive waste.

  8. The 4th ATLAS Physics Workshop in Athens: The discussions, social events, environment, atmosphere, etc.

    CERN Multimedia

    Kawagoe, K

    Over 220 people attended the 4th Atlas Software Workshop in Athens, Greece, a place with a history of thousands of years of scientific achievement. The workshop was hosted by the University of Athens, the National Technical University of Athens, and the Aristotle University of Thessalonki. The venue for the meeting was the newly opened Conference Center of the Physics Department of the University of Athens which featured very comfortable plush red chairs (too comfortable for some of the more jet-lagged workshop participants!). Fig.1. Participants gathering in front of the Conference Center. The workshop schedule was structured to allow plenty of time during breaks for the many lively discussions that developed from the presentations. Ample supplies of coffee, juice, and cookies fueled the discussions. Discussions continued over lunches featuring Greek Salads and other tasty fare. The food was so good that one speaker offered the meal tickets as prize for answering a quiz at the end of her talk! The w...

  9. 1994 DOE Technical Standards Program Workshop: Proceedings

    International Nuclear Information System (INIS)

    Spellman, D.J.

    1994-01-01

    The DOE Technical Standards Program has been structured to provide guidance and assistance for the development, adoption, and use of voluntary standards within the Department. OMB Circular A-119, ''Federal Participation in the Development and Use of Voluntary Standards'' establishes the policy to be followed in working with voluntary standards bodies, and in adopting and using voluntary standards whenever feasible. The DOE Technical Standards Program is consistent with this policy and is dedicated to the task of promoting its implementation. The theme of this year's workshop is ''Standards Initiatives in Environmental Management fostering the development and use of industry standards for safe, environmentally responsible operations.'' The objective of the workshop is to increase the participant's awareness of the standardization activities taking place nationally and internationally and the impact of these activities on their efforts, and to facilitate the exchange of experiences, processes, and tools for implementing the program. Workshop sessions will include presentations by industry and Government notables in the environment, safety, and health arena with ample opportunity for everyone to ask questions and share experiences. There will be a breakout session which will concentrate on resolution of issues arising from the implementation of the DOE Technical Standards Program and a plenary session to discuss the plans developed by the breakout groups. Many organizations provide services and products which support the development, processing, distribution, and retrieval of standards. Those organizations listed at the end of the agenda will have exhibits available for your perusal throughout the workshop. Last year's workshop was very successful in stimulating an understanding of an interest in the standards program. This year, we hope to build on that success and provide an environment for the synergism of ideas to enhance the program and advance its implementation

  10. Simulation of mechanical shock environments

    International Nuclear Information System (INIS)

    Lalanne, Christian.

    1975-07-01

    Shocks can produce a severe mechanical environment which must be taken into account when designing and developing new equipments. After some mathematical (Laplace and Fourier transforms) and mechanical recalls (response of a one degree freedom system to a sinusoidal excitation), different analysis methods are compared, these methods being the most used now to compare relative severities of tests and establish specifications. A few chapter deal with the different properties of simple, easy to produce, shock shapes. Then some now-in-use programmators or shock-machines specifications are shown. A final chapter concerns acceleration transducers [fr

  11. 77 FR 31371 - Public Workshop: Privacy Compliance Workshop

    Science.gov (United States)

    2012-05-25

    ... presentations, including the privacy compliance fundamentals, privacy and data security, and the privacy... DEPARTMENT OF HOMELAND SECURITY Office of the Secretary Public Workshop: Privacy Compliance... Homeland Security Privacy Office will host a public workshop, ``Privacy Compliance Workshop.'' DATES: The...

  12. WE-AB-206-03: Workshop

    International Nuclear Information System (INIS)

    Lu, Z.

    2016-01-01

    The involvement of medical physicists in diagnostic ultrasound imaging service is increasing due to QC and accreditation requirements. The goal of this ultrasound hands-on workshop is to demonstrate quality control (QC) testing in diagnostic ultrasound and to provide updates in ACR ultrasound accreditation requirements. The first half of this workshop will include two presentations reviewing diagnostic ultrasound QA/QC and ACR ultrasound accreditation requirements. The second half of the workshop will include live demonstrations of basic QC tests. An array of ultrasound testing phantoms and ultrasound scanners will be available for attendees to learn diagnostic ultrasound QC in a hands-on environment with live demonstrations and on-site instructors. The targeted attendees are medical physicists in diagnostic imaging. Learning Objectives: Gain familiarity with common elements of a QA/QC program for diagnostic ultrasound imaging dentify QC tools available for testing diagnostic ultrasound systems and learn how to use these tools Learn ACR ultrasound accreditation requirements Jennifer Walter is an employee of American College of Radiology on Ultrasound Accreditation.

  13. Workshops som forskningsmetode

    OpenAIRE

    Ørngreen, Rikke; Levinsen, Karin Tweddell

    2017-01-01

    This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice, and workshops as a research methodology. Focusing primarily on the latter, this paper presents five studies on upper secondary and higher education teachers’ professional development and on teaching and learnin...

  14. Report on the SNL/NSF International Workshop on Joint Mechanics, Arlington, Virginia, 16-18 October 2006.

    Energy Technology Data Exchange (ETDEWEB)

    Ewins, David J. (Imperial College, London England, UK); Bergman, Lawrence A. (University of Illinois, Urbana, IL); Segalman, Daniel Joseph

    2007-11-01

    The NSF/SNL joint mechanics workshop, held in Arlington, Virginia, 16-18 October, 2006, attempted to assess the current state of the art for modeling joint mechanics for the purpose of structural dynamics calculation, to identify the underlying physics issues that must be addressed to advance the field, and to propose a path forward. Distinguished participants from several countries representing research communities that focus on very different length and time scales identified multiple challenges in bridging those scales. Additionally, two complementary points of view were developed for addressing those challenges. The first approach - the 'bottom-up' perspective - attempts to bridge scales by starting from the smallest length scale and working up. The other approach starts at the length scale of application and attempts to deduce mechanics at smaller length scales through reconciliation with laboratory observation. Because interface physics is a limiting element of predictive simulation in defense and transportation, this issue will be of continuing importance for the foreseeable future.

  15. Selected papers from the 23rd MicroMechanics and Microsystems Europe Workshop (MME 2012) (Ilmenau, Germany, September 9-12, 2012)

    Science.gov (United States)

    Hoffmann, Martin

    2013-07-01

    In September 2012, the 23rd MicroMechanics Europe Workshop (MME) took place in Ilmenau, Germany. With about 120 participants from 20 countries and 76 accepted presentations, the workshop series turned out to be a successful platform for young scientists to present their work to our scientific community. Traditionally, the interaction is an important aspect of this workshop: while short presentations introduce the posters, an extended poster session allows intensive discussion which is quite useful to the participants. The discussion very often extends into the breaks and the evening events. It is also encouraging for them that the best presentations are selected and invited to submit a full paper to this journal. Thanks to the support of IOP Publishing, this next logical step to present work to the scientific world is made possible. In this issue, you can find the best papers that have been selected by a committee during the workshop taking the written workshop contribution, the poster and the presentation into account. Again, all areas of micromechanics from new technology developments up to systems integration were presented at the workshop at different levels of completion. The selected papers present those results which are almost complete. Nevertheless, it is nice to see that in some cases topics grow over the years from 'nice ideas' to realized system concepts. And although this is the 23rd workshop, it is clear that micromechanics is a topic that is not running short of new ideas. First, I would like to thank the authors of the selected papers for each of their individual excellent contributions. My gratitude also goes to my fellow members in the programme committee (Per Ohlckers, Martin Hill and Sami Franssila) for their cooperation in the selection of invited speakers and submitted papers, as well as the anonymous Journal of Micromechanics and Microengineering (JMM) reviewers for their careful selection of the final papers presented here. Last, but not

  16. 2nd Conference on Mechanisms, Transmissions and Applications

    CERN Document Server

    Pinto, Charles; Lovasz, Erwin-Christian

    2014-01-01

    The Second Conference on Mechanisms, Transmissions and Applications - MeTrApp 2013 was organised by the Mechanical Engineering Department of the University of the Basque Country (Spain) under the patronage of the IFToMM Technical Committees Linkages and Mechanical Controls and Micromachines and the Spanish Association of Mechanical Engineering.  The aim of the workshop was to bring together researchers, scientists, industry experts and students to provide, in a friendly and stimulating environment, the opportunity to exchange know-how and promote collaboration in the field of Mechanism and Machine Science.  The topics treated in this volume are mechanism and machine design, biomechanics, mechanical transmissions, mechatronics, computational and experimental methods, dynamics of mechanisms and micromechanisms and microactuators.

  17. The Future of Nonproliferation in a Changed and Changing Environment: A Workshop Summary

    International Nuclear Information System (INIS)

    Dreicer, M.

    2016-01-01

    The Center for Global Security Research and Global Security Principal Directorate at Lawrence Livermore National Laboratory convened a workshop in July 2016 to consider ''The Future of Nonproliferation in a Changed and Changing Security Environment.'' We took a broad view of nonproliferation, encompassing not just the treaty regime but also arms control, threat reduction, counter-roliferation, and countering nuclear terrorism. We gathered a group of approximately 60 experts from the technical, academic, political, defense and think tank communities and asked them what and how much can reasonably be accomplished in each of these areas in the 5 to 10 years ahead. Discussion was on a not-for-attribution basis. This document provides a summary of key insights and lessons learned, and is provided to help stimulate broader public discussion of these issues. It is a collection of ideas as informally discussed and debated among a group of experts. The ideas reported here are the personal views of individual experts and should not be attributed to Lawrence Livermore National Laboratory.

  18. The Future of Nonproliferation in a Changed and Changing Environment: A Workshop Summary

    Energy Technology Data Exchange (ETDEWEB)

    Dreicer, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-08-30

    The Center for Global Security Research and Global Security Principal Directorate at Lawrence Livermore National Laboratory convened a workshop in July 2016 to consider “The Future of Nonproliferation in a Changed and Changing Security Environment.” We took a broad view of nonproliferation, encompassing not just the treaty regime but also arms control, threat reduction, counter-­proliferation, and countering nuclear terrorism. We gathered a group of approximately 60 experts from the technical, academic, political, defense and think tank communities and asked them what—and how much—can reasonably be accomplished in each of these areas in the 5 to 10 years ahead. Discussion was on a not-­for-­attribution basis. This document provides a summary of key insights and lessons learned, and is provided to help stimulate broader public discussion of these issues. It is a collection of ideas as informally discussed and debated among a group of experts. The ideas reported here are the personal views of individual experts and should not be attributed to Lawrence Livermore National Laboratory.

  19. HTTR workshop (workshop on hydrogen production technology)

    International Nuclear Information System (INIS)

    Shiina, Yasuaki; Takizuka, Takakazu

    2004-12-01

    Various research and development efforts have been performed to solve the global energy and environmental problems caused by large consumption of fossil fuels. Research activities on advanced hydrogen production technology by the use of nuclear heat from high temperature gas cooled reactors, for example, have been flourished in universities, research institutes and companies in many countries. The Department of HTTR Project and the Department of Advanced Nuclear Heat Technology of JAERI held the HTTR Workshop (Workshop on Hydrogen Production Technology) on July 5 and 6, 2004 to grasp the present status of R and D about the technology of HTGR and the nuclear hydrogen production in the world and to discuss about necessity of the nuclear hydrogen production and technical problems for the future development of the technology. More than 110 participants attended the Workshop including foreign participants from USA, France, Korea, Germany, Canada and United Kingdom. In the Workshop, the presentations were made on such topics as R and D programs for nuclear energy and hydrogen production technologies by thermo-chemical or other processes. Also, the possibility of the nuclear hydrogen production in the future society was discussed. The workshop showed that the R and D for the hydrogen production by the thermo-chemical process has been performed in many countries. The workshop affirmed that nuclear hydrogen production could be one of the competitive supplier of hydrogen in the future. The second HTTR Workshop will be held in the autumn next year. (author)

  20. EML indoor radon workshop, 1982

    International Nuclear Information System (INIS)

    George, A.C.; Lowder, W.; Fisenne, I.; Knutson, E.O.; Hinchliffe, L.

    1983-07-01

    A workshop on indoor radon, held at the Environmental Measurements Laboratory (EML) on November 30 and December 1, 1982, covered recent developments in radon daughter research and development. Thirty papers were presented dealing with standardization and quality assurance measurement methods, surveys, measurements strategy, physical mechanisms of radon and radon daughter transport and development of guidance standards for indoor exposures. The workshop concluded with a planning session that identified the following needs: (1) national and international intercomparisons of techniques for measuring radon and radon daughter concentrations, working level and radon exhalation flux density; (2) development and refinement of practical measurement techniques for thoron and its daughter products; (3) quantitative definition of the sources of indoor radon and the mechanisms of transport into structures; (4) better knowledge of the physical properties of radon daughters; (5) more complete and accurate data on the population exposure to radon, which can only be met by broadly based surveys; and (6) more international cooperation and information exchange among countries with major research programs

  1. Building Strong Geoscience Departments Through the Visiting Workshop Program

    Science.gov (United States)

    Ormand, C. J.; Manduca, C. A.; Macdonald, H.; Bralower, T. J.; Clemens-Knott, D.; Doser, D. I.; Feiss, P. G.; Rhodes, D. D.; Richardson, R. M.; Savina, M. E.

    2011-12-01

    The Building Strong Geoscience Departments project focuses on helping geoscience departments adapt and prosper in a changing and challenging environment. From 2005-2009, the project offered workshop programs on topics such as student recruitment, program assessment, preparing students for the workforce, and strengthening geoscience programs. Participants shared their departments' challenges and successes. Building on best practices and most promising strategies from these workshops and on workshop leaders' experiences, from 2009-2011 the project ran a visiting workshop program, bringing workshops to 18 individual departments. Two major strengths of the visiting workshop format are that it engages the entire department in the program, fostering a sense of shared ownership and vision, and that it focuses on each department's unique situation. Departments applied to have a visiting workshop, and the process was highly competitive. Selected departments chose from a list of topics developed through the prior workshops: curriculum and program design, program elements beyond the curriculum, recruiting students, preparing students for the workforce, and program assessment. Two of our workshop leaders worked with each department to customize and deliver the 1-2 day programs on campus. Each workshop incorporated exercises to facilitate active departmental discussions, presentations incorporating concrete examples drawn from the leaders' experience and from the collective experiences of the geoscience community, and action planning to scaffold implementation. All workshops also incorporated information on building departmental consensus and assessing departmental efforts. The Building Strong Geoscience Departments website complements the workshops with extensive examples from the geoscience community. Of the 201 participants in the visiting workshop program, 140 completed an end of workshop evaluation survey with an overall satisfaction rating of 8.8 out of a possible 10

  2. 21st Century Kinematics : The 2012 NSF Workshop

    CERN Document Server

    2013-01-01

    21st Century Kinematics focuses on algebraic problems in the analysis and synthesis of mechanisms and robots, compliant mechanisms, cable-driven systems and protein kinematics. The specialist contributors provide the background for a series of presentations at the 2012 NSF Workshop. The text shows how the analysis and design of innovative mechanical systems yield increasingly complex systems of polynomials, characteristic of those systems. In doing so, takes advantage of increasingly sophisticated computational tools developed for numerical algebraic geometry and demonstrates the now routine derivation of polynomial systems dwarfing the landmark problems of even the recent past. The 21st Century Kinematics workshop echoes the NSF-supported 1963 Yale Mechanisms Teachers Conference that taught a generation of university educators the fundamental principles of kinematic theory. As such these proceedings will be provide admirable supporting theory for a graduate course in modern kinematics and should be of consid...

  3. Workshop on indoor air quality research needs

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    Workshop participants report on indoor air quality research needs including the monitoring of indoor air quality, report of the instrumentation subgroup of indoor air quality, health effects, and the report of the control technology session. Risk analysis studies addressing indoor environments were also summarized. (DLS)

  4. Workshop on indoor air quality research needs

    International Nuclear Information System (INIS)

    1980-01-01

    Workshop participants report on indoor air quality research needs including the monitoring of indoor air quality, report of the instrumentation subgroup of indoor air quality, health effects, and the report of the control technology session. Risk analysis studies addressing indoor environments were also summarized

  5. The Second International Workshop on Bioprinting, Biopatterning and Bioassembly.

    Science.gov (United States)

    Mironov, Vladimir

    2005-08-01

    The Second International Workshop on Bioprinting, Biopatterning and Bioassembly was held at the Medical University of South Carolina (MUSC), located in the beautiful, historic city of Charleston. The workshop attracted > 50 participants from 10 different countries, including mechanical and chemical engineers, molecular, cell and developmental biologists, biophysicists, mathematicians, clinicians, humanists and artists. Bioprinting can be defined as computer-aided, automatic, layer-by-layer deposition, transfer and patterning of biologically relevant materials. The workshop goal was to gather the world's experts and leaders, present the latest results, assess future trends, explore new applications, and promote international collaborations and academic-industrial partnerships. The workshop demonstrated the multidisciplinary and global character of ongoing efforts in the development of bioprinting technology, galvanised an evolving community of bioprintists, and demonstrated feasibility as well as strong potential for a broad spectrum of applications of bioprinting technology. The Third International Workshop on Bioprinting, Biopatterning and Bioassembly is planned for Japan in 2006.

  6. Lighting Assessment in Knitting Workshop in Yazd

    Directory of Open Access Journals (Sweden)

    A Barkhordari

    2016-01-01

    Full Text Available Introduction: The sense of sight is one of the most vital human senses and help the environment gets most of its information. Whatever one's job is more subtle, more work will be given brightness. Good lighting, increase work efficiency and general physiological effects on people's moods. The relationship between low and high frequency illumination accidents there Methods: This study was conducted in 10 workshops in Yazd home knitting. Due to maximize natural lighting measurements in June and November this year took place in cloudy days. Thus, in both seasons overall lighting, natural and artificial, were evaluated. That, in order to measure all the natural light, artificial light sources (lamps and the measurements were off by clarifying re-lamp, the overall lighting (natural and artificial were measured. In order to measure the general lighting provided by the Illuminating Engineering society and stop the pattern surfaces were used. The workshops with less than standard lighting conditions were identified and interventions to improve the brightness of the workshops were measured again. Results: Average, minimum and maximum overall brightness of spring workshops 4 and 6 respectively, with values of 67/278 and 53/452 is a luxury. Workshops values 5 and 2 47/184 and 43/218 minimum and maximum luxury in order to be daylight in spring. Conclusions: The majority of the studied weaving Workshops lighting was good, with measures such as proper installation and periodic cleaning and dust lamps, replacement lamps burned by use of fluorescent ambient lighting conditions can be improved.

  7. Marine Ecological Environment Management Based on Ecological Compensation Mechanisms

    Directory of Open Access Journals (Sweden)

    Qunzhen Qu

    2016-12-01

    Full Text Available The level of marine environmental management is a key factor in the successful implementation of marine power strategies. The improvement in management levels of marine environments requires innovation in marine management. In other words, the transformation of marine environmental management into marine ecological environment management must be done in order to achieve sustainable development of the marine economy. As an environmental economic policy that combines both administrative and market measures, ecological compensation mechanisms have significant advantages in marine ecological environment management. Based on the study of the current development of ecological compensation mechanisms in China, through the analysis of the connotation of marine ecological civilization, existing marine ecological protection practices and marine environmental management methods, this paper posits that the current marine ecological environment management in China should be established on the basis of ecological compensation mechanisms. At present, a lack of laws and regulations for overall marine ecological environment management is the key factor restricting the practice of marine ecological environment management. Therefore, it is necessary to explore the current path of marine ecological environment management in China from the perspective of the construction of legal system of ecological compensation law, the establishment of ecological compensation fees, ecological taxes and ecological compensation fund systems, and the clear status for a marine ecological management and supervision body.

  8. International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines

    CERN Document Server

    Belyaev, Alexander; Krommer, Michael

    2017-01-01

    The papers in this volume present and discuss the frontiers in the mechanics of controlled machines and structures. They are based on papers presented at the International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines held in Vienna in September 2015. The workshop continues a series of international workshops held in Linz (2008) and St. Petersburg (2010).

  9. NASA-LaRc Flight-Critical Digital Systems Technology Workshop

    Science.gov (United States)

    Meissner, C. W., Jr. (Editor); Dunham, J. R. (Editor); Crim, G. (Editor)

    1989-01-01

    The outcome is documented of a Flight-Critical Digital Systems Technology Workshop held at NASA-Langley December 13 to 15 1988. The purpose of the workshop was to elicit the aerospace industry's view of the issues which must be addressed for the practical realization of flight-critical digital systems. The workshop was divided into three parts: an overview session; three half-day meetings of seven working groups addressing aeronautical and space requirements, system design for validation, failure modes, system modeling, reliable software, and flight test; and a half-day summary of the research issues presented by the working group chairmen. Issues that generated the most consensus across the workshop were: (1) the lack of effective design and validation methods with support tools to enable engineering of highly-integrated, flight-critical digital systems, and (2) the lack of high quality laboratory and field data on system failures especially due to electromagnetic environment (EME).

  10. Diversity in Action workshop | 14 June | Business Center Technoparc

    CERN Multimedia

    2016-01-01

    After two years, five successful editions and plenty of positive feedback, we are happy to announce the 7th edition of our Diversity in Action workshop.   Tuesday 14 June 2016 – 8.30 a.m. - 12.30 p.m. Crêt Neige (Business Center Technoparc) Seize the opportunity and participate in this half-day interactive workshop designed to explore the meaning and importance of diversity at CERN. Using participative multi-media methods and study cases from the CERN work environment, this workshop will provide participants with insights into the different dimensions of diversity, help to develop greater sensitivity to differences, explore ways to recognise and overcome biases and thereby strengthen our tradition of inclusiveness at CERN. “For me it was a great opportunity to talk about diversity issues with other people at CERN who I would have never met otherwise," says Alex Brown, who participated in the 3rd edition of the workshop. "The ...

  11. International magnetic pulse compression workshop: (Proceedings)

    Energy Technology Data Exchange (ETDEWEB)

    Kirbie, H.C.; Newton, M.A.; Siemens, P.D.

    1991-04-01

    A few individuals have tried to broaden the understanding of specific and salient pulsed-power topics. One such attempt is this documentation of a workshop on magnetic switching as it applies primarily to pulse compression (power transformation), affording a truly international perspective by its participants under the initiative and leadership of Hugh Kirbie and Mark Newton of the Lawrence Livermore National Laboratory (LLNL) and supported by other interested organizations. During the course of the Workshop at Granlibakken, a great deal of information was amassed and a keen insight into both the problems and opportunities as to the use of this switching approach was developed. The segmented workshop format proved ideal for identifying key aspects affecting optimum performance in a variety of applications. Individual groups of experts addressed network and system modeling, magnetic materials, power conditioning, core cooling and dielectrics, and finally circuits and application. At the end, they came together to consolidate their input and formulate the workshop's conclusions, identifying roadblocks or suggesting research projects, particularly as they apply to magnetic switching's trump card--its high-average-power-handling capability (at least on a burst-mode basis). The workshop was especially productive both in the quality and quantity of information transfer in an environment conducive to a free and open exchange of ideas. We will not delve into the organization proper of this meeting, rather we wish to commend to the interested reader this volume, which provides the definitive and most up-to-date compilation on the subject of magnetic pulse compression from underlying principles to current state of the art as well as the prognosis for the future of magnetic pulse compression as a consensus of the workshop's organizers and participants.

  12. International magnetic pulse compression workshop: [Proceedings

    International Nuclear Information System (INIS)

    Kirbie, H.C.; Newton, M.A.; Siemens, P.D.

    1991-04-01

    A few individuals have tried to broaden the understanding of specific and salient pulsed-power topics. One such attempt is this documentation of a workshop on magnetic switching as it applies primarily to pulse compression (power transformation), affording a truly international perspective by its participants under the initiative and leadership of Hugh Kirbie and Mark Newton of the Lawrence Livermore National Laboratory (LLNL) and supported by other interested organizations. During the course of the Workshop at Granlibakken, a great deal of information was amassed and a keen insight into both the problems and opportunities as to the use of this switching approach was developed. The segmented workshop format proved ideal for identifying key aspects affecting optimum performance in a variety of applications. Individual groups of experts addressed network and system modeling, magnetic materials, power conditioning, core cooling and dielectrics, and finally circuits and application. At the end, they came together to consolidate their input and formulate the workshop's conclusions, identifying roadblocks or suggesting research projects, particularly as they apply to magnetic switching's trump card--its high-average-power-handling capability (at least on a burst-mode basis). The workshop was especially productive both in the quality and quantity of information transfer in an environment conducive to a free and open exchange of ideas. We will not delve into the organization proper of this meeting, rather we wish to commend to the interested reader this volume, which provides the definitive and most up-to-date compilation on the subject of magnetic pulse compression from underlying principles to current state of the art as well as the prognosis for the future of magnetic pulse compression as a consensus of the workshop's organizers and participants

  13. A Tale Of 160 Scientists, Three Applications, a Workshop and a Cloud

    Science.gov (United States)

    Berriman, G. B.; Brinkworth, C.; Gelino, D.; Wittman, D. K.; Deelman, E.; Juve, G.; Rynge, M.; Kinney, J.

    2013-10-01

    The NASA Exoplanet Science Institute (NExScI) hosts the annual Sagan Workshops, thematic meetings aimed at introducing researchers to the latest tools and methodologies in exoplanet research. The theme of the Summer 2012 workshop, held from July 23 to July 27 at Caltech, was to explore the use of exoplanet light curves to study planetary system architectures and atmospheres. A major part of the workshop was to use hands-on sessions to instruct attendees in the use of three open source tools for the analysis of light curves, especially from the Kepler mission. Each hands-on session involved the 160 attendees using their laptops to follow step-by-step tutorials given by experts. One of the applications, PyKE, is a suite of Python tools designed to reduce and analyze Kepler light curves; these tools can be invoked from the Unix command line or a GUI in PyRAF. The Transit Analysis Package (TAP) uses Markov Chain Monte Carlo (MCMC) techniques to fit light curves under the Interactive Data Language (IDL) environment, and Transit Timing Variations (TTV) uses IDL tools and Java-based GUIs to confirm and detect exoplanets from timing variations in light curve fitting. Rather than attempt to run these diverse applications on the inevitable wide range of environments on attendees laptops, they were run instead on the Amazon Elastic Cloud 2 (EC2). The cloud offers features ideal for this type of short term need: computing and storage services are made available on demand for as long as needed, and a processing environment can be customized and replicated as needed. The cloud environment included an NFS file server virtual machine (VM), 20 client VMs for use by attendees, and a VM to enable ftp downloads of the attendees' results. The file server was configured with a 1 TB Elastic Block Storage (EBS) volume (network-attached storage mounted as a device) containing the application software and attendees home directories. The clients were configured to mount the applications and

  14. ASCR Workshop on Quantum Computing for Science

    Energy Technology Data Exchange (ETDEWEB)

    Aspuru-Guzik, Alan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Van Dam, Wim [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Farhi, Edward [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gaitan, Frank [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Humble, Travis [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jordan, Stephen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Landahl, Andrew J [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Love, Peter [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lucas, Robert [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Preskill, John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Muller, Richard P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Svore, Krysta [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wiebe, Nathan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Williams, Carl [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-06-01

    This report details the findings of the DOE ASCR Workshop on Quantum Computing for Science that was organized to assess the viability of quantum computing technologies to meet the computational requirements of the DOE’s science and energy mission, and to identify the potential impact of quantum technologies. The workshop was held on February 17-18, 2015, in Bethesda, MD, to solicit input from members of the quantum computing community. The workshop considered models of quantum computation and programming environments, physical science applications relevant to DOE's science mission as well as quantum simulation, and applied mathematics topics including potential quantum algorithms for linear algebra, graph theory, and machine learning. This report summarizes these perspectives into an outlook on the opportunities for quantum computing to impact problems relevant to the DOE’s mission as well as the additional research required to bring quantum computing to the point where it can have such impact.

  15. Imaging Sciences Workshop Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Candy, J.V.

    1996-11-21

    This report contains the proceedings of the Imaging Sciences Workshop sponsored by C.A.S.LS., the Center for Advanced Signal & Image Sciences. The Center, established primarily to provide a forum where researchers can freely exchange ideas on the signal and image sciences in a comfortable intellectual environment, has grown over the last two years with the opening of a Reference Library (located in Building 272). The Technical Program for the 1996 Workshop include a variety of efforts in the Imaging Sciences including applications in the Microwave Imaging, highlighted by the Micro-Impulse Radar (MIR) system invented at LLNL, as well as other applications in this area. Special sessions organized by various individuals in Speech, Acoustic Ocean Imaging, Radar Ocean Imaging, Ultrasonic Imaging, and Optical Imaging discuss various applica- tions of real world problems. For the more theoretical, sessions on Imaging Algorithms and Computed Tomography were organized as well as for the more pragmatic featuring a session on Imaging Systems.

  16. Asian-American Communications: In-School Staff Workshops, 1991-92. Final Evaluation Report. OREA Report.

    Science.gov (United States)

    Zhang, Zenin

    The In-School Staff Workshops project run by Asian-American Communications was evaluated in its fourth year. The project provided various workshops for staff on Asian American and Asian cultures, intercultural communications, and strategies for helping Asian American students adjust to their new social and educational environments. The project…

  17. Wind Turbine Drivetrain Reliability Collaborative Workshop: A Recap

    Energy Technology Data Exchange (ETDEWEB)

    Keller, Jonathan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sheng, Shuangwen [National Renewable Energy Lab. (NREL), Golden, CO (United States); Cotrell, Jason [National Renewable Energy Lab. (NREL), Golden, CO (United States); Greco, Aaron [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-08-01

    The Wind Turbine Drivetrain Reliability Collaborative Workshop was convened by the National Renewable Energy Laboratory (NREL), Argonne National Laboratory, and the U.S. Department of Energy to explore the state of the art in wind turbine drivetrain mechanical system reliability as well as research and development (R&D) challenges that if solved could have significant benefits. The workshop was held at the Research Support Facility on NREL's main campus in Golden, Colorado, from February 16-17, 2016. More than 120 attendees participated from industry, academia, and government. Plenary presentations covered wind turbine drivetrain design, testing, and analysis; tribology -- the science and engineering of interacting surfaces in relative motion -- and failure modes; and condition monitoring and data analytics. In addition to the presentations, workshops were held in each of these areas to discuss R&D challenges. This report serves as a summary of the presentations, workshops, and conclusions on R&D challenges in wind turbine drivetrain reliability.

  18. 3D-TRANS-2003, Workshop on Common Tools and Interfaces for Radiation Transport Codes

    International Nuclear Information System (INIS)

    2004-01-01

    Description: Contents proceedings of Workshop on Common Tools and Interfaces for Deterministic Radiation Transport, for Monte Carlo and Hybrid Codes with a proposal to develop the following: GERALD - A General Environment for Radiation Analysis and Design. GERALD intends to create a unifying software environment where the user can define, solve and analyse a nuclear radiation transport problem using available numerical tools seamlessly. This environment will serve many purposes: teaching, research, industrial needs. It will also help to preserve the existing analytical and numerical knowledge base. This could represent a significant step towards solving the legacy problem. This activity should contribute to attracting young engineers to nuclear science and engineering and contribute to competence and knowledge preservation and management. This proposal was made at the on Workshop on C ommon Tools and Interfaces for Deterministic Radiation Transport, for Monte Carlo and Hybrid Codes , held from 25-26 September 2003 in connection with the conference SNA-2003. A first success with the development of such tools was achieved with the BOT3P2.0 and 3.0 codes providing an easy procedure and mechanism for defining and displaying 3D geometries and materials both in the form of refineable meshes for deterministic codes or Monte Carlo geometries consistent with deterministic models. Advanced SUSD: Improved tools for Sensitivity/Uncertainty Analysis. The development of tools for the analysis and estimation of sensitivities and uncertainties in calculations, or their propagation through complex computational schemes, in the field of neutronics, thermal hydraulics and also thermo-mechanics is of increasing importance for research and engineering applications. These tools allow establishing better margins for engineering designs and for the safe operation of nuclear facilities. Such tools are not sufficiently developed, but their need is increasingly evident in many activities

  19. Electro-Mechanical Systems for Extreme Space Environments

    Science.gov (United States)

    Mojarradi, Mohammad M.; Tyler, Tony R.; Abel, Phillip B.; Levanas, Greg

    2011-01-01

    Exploration beyond low earth orbit presents challenges for hardware that must operate in extreme environments. The current state of the art is to isolate and provide heating for sensitive hardware in order to survive. However, this protection results in penalties of weight and power for the spacecraft. This is particularly true for electro-mechanical based technology such as electronics, actuators and sensors. Especially when considering distributed electronics, many electro-mechanical systems need to be located in appendage type locations, making it much harder to protect from the extreme environments. The purpose of this paper to describe the advances made in the area of developing electro-mechanical technology to survive these environments with minimal protection. The Jet Propulsion Lab (JPL), the Glenn Research Center (GRC), the Langley Research Center (LaRC), and Aeroflex, Inc. over the last few years have worked to develop and test electro-mechanical hardware that will meet the stringent environmental demands of the moon, and which can also be leveraged for other challenging space exploration missions. Prototype actuators and electronics have been built and tested. Brushless DC actuators designed by Aeroflex, Inc have been tested with interface temperatures as low as 14 degrees Kelvin. Testing of the Aeroflex design has shown that a brushless DC motor with a single stage planetary gearbox can operate in low temperature environments for at least 120 million cycles (measured at motor) if long life is considered as part of the design. A motor control distributed electronics concept developed by JPL was built and operated at temperatures as low as -160 C, with many components still operational down to -245 C. Testing identified the components not capable of meeting the low temperature goal of -230 C. This distributed controller is universal in design with the ability to control different types of motors and read many different types of sensors. The controller

  20. Proceedings of the fifteenth international workshop on ceramic breeder blanket interactions

    International Nuclear Information System (INIS)

    Tanigawa, Hisashi; Enoeda, Mikio

    2010-03-01

    This report is the Proceedings of 'the Fifteenth International Workshop on Ceramic Breeder Blanket Interactions' which was held as a workshop on ceramic breeders Under the IEA Implementing Agreement on the Nuclear Technology of Fusion Reactors. This workshop was held in Sapporo, Japan on 3-4, Sept. 2009. Twenty six participants from EU, Japan, India, Russia and USA attended the workshop. The scope of the workshop included 1) evolutions in ceramic breeder blanket design, 2) progress in ceramic breeder material development, 3) irradiation testing, 4) breeder material properties, 5) out-of-pile pebble bed experiment, 6) modeling of the thermal, mechanical and tritium transfer behavior of pebble beds and 7) interfacing issues of solid breeder blanket development. By this workshop, advance of key technologies for solid breeder blanket development was shared among the participants. Also, desired direction of further investigation and development was recognized. The 20 of the presented papers are indexed individually. (J.P.N.)

  1. Proceedings of the fifteenth international workshop on ceramic breeder blanket interactions

    Energy Technology Data Exchange (ETDEWEB)

    Tanigawa, Hisashi; Enoeda, Mikio [Japan Atomic Energy Agency, Fusion Research and Development Directorate, Naka, Ibaraki (Japan)

    2010-03-15

    This report is the Proceedings of 'the Fifteenth International Workshop on Ceramic Breeder Blanket Interactions' which was held as a workshop on ceramic breeders Under the IEA Implementing Agreement on the Nuclear Technology of Fusion Reactors. This workshop was held in Sapporo, Japan on 3-4, Sept. 2009. Twenty six participants from EU, Japan, India, Russia and USA attended the workshop. The scope of the workshop included 1) evolutions in ceramic breeder blanket design, 2) progress in ceramic breeder material development, 3) irradiation testing, 4) breeder material properties, 5) out-of-pile pebble bed experiment, 6) modeling of the thermal, mechanical and tritium transfer behavior of pebble beds and 7) interfacing issues of solid breeder blanket development. By this workshop, advance of key technologies for solid breeder blanket development was shared among the participants. Also, desired direction of further investigation and development was recognized. The 20 of the presented papers are indexed individually. (J.P.N.)

  2. Effect of Thermal Environment on the Mechanical Behaviors of Building Marble

    Directory of Open Access Journals (Sweden)

    Haijian Su

    2018-01-01

    Full Text Available High temperature and thermal environment can influence the mechanical properties of building materials worked in the civil engineering, for example, concrete, building rock, and steel. This paper examines standard cylindrical building marble specimens (Φ50 × 100 mm that were treated with high temperatures in two different thermal environments: vacuum (VE and airiness (AE. Uniaxial compression tests were also carried out on those specimens after heat treatment to study the effect that the thermal environment has on mechanical behaviors. With an increase in temperature, the mechanical behavior of marble in this study indicates a critical temperature of 600°C. Both the peak stress and elasticity modulus were larger for the VE than they were for the AE. The thermal environment has an obvious influence on the mechanical properties, especially at temperatures of 450∼750°C. The failure mode of marble specimens under uniaxial compression is mainly affected by the thermal environment at 600°C.

  3. Ninth International Workshop on Plant Membrane Biology

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    This report is a compilation of abstracts from papers which were discussed at a workshop on plant membrane biology. Topics include: plasma membrane ATP-ases; plant-environment interactions, membrane receptors; signal transduction; ion channel physiology; biophysics and molecular biology; vaculor H+ pumps; sugar carriers; membrane transport; and cellular structure and function.

  4. Varenna workshop report. Operational earthquake forecasting and decision making

    Directory of Open Access Journals (Sweden)

    Warner Marzocchi

    2015-09-01

    Full Text Available A workshop on Operational earthquake forecasting and decision making was convened in Varenna, Italy, on June 8-11, 2014, under the sponsorship of the EU FP 7 REAKT (Strategies and tools for Real-time EArthquake risK reducTion project, the Seismic Hazard Center at the Istituto Nazionale di Geofisica e Vulcanologia (INGV, and the Southern California Earthquake Center (SCEC. The main goal was to survey the interdisciplinary issues of operational earthquake forecasting (OEF, including the problems that OEF raises for decision making and risk communication. The workshop was attended by 64 researchers from universities, research centers, and governmental institutions in 11 countries. Participants and the workshop agenda are listed in the appendix.The workshop comprised six topical sessions structured around three main themes: the science of operational earthquake forecasting, decision making in a low-probability environment, and communicating hazard and risk. Each topic was introduced by a moderator and surveyed by a few invited speakers, who were then empaneled for an open discussion. The presentations were followed by poster sessions. During a wrap-up session on the last day, the reporters for each topical session summarized the main points that they had gleaned from the talks and open discussions. This report attempts to distill this workshop record into a brief overview of the workshop themes and to describe the range of opinions expressed during the discussions.

  5. Third International Workshop on Squeezed States and Uncertainty Relations

    Science.gov (United States)

    Han, D. (Editor); Kim, Y. S. (Editor); Rubin, Morton H. (Editor); Shih, Yan-Hua (Editor); Zachary, Woodford W. (Editor)

    1994-01-01

    The purpose of these workshops is to bring together an international selection of scientists to discuss the latest developments in Squeezed States in various branches of physics, and in the understanding of the foundations of quantum mechanics. At the third workshop, special attention was given to the influence that quantum optics is having on our understanding of quantum measurement theory. The fourth meeting in this series will be held in the People's Republic of China.

  6. PREFACE: Counting Complexity: An international workshop on statistical mechanics and combinatorics

    Science.gov (United States)

    de Gier, Jan; Warnaar, Ole

    2006-07-01

    On 10-15 July 2005 the conference `Counting Complexity: An international workshop on statistical mechanics and combinatorics' was held on Dunk Island, Queensland, Australia in celebration of Tony Guttmann's 60th birthday. Dunk Island provided the perfect setting for engaging in almost all of Tony's life-long passions: swimming, running, food, wine and, of course, plenty of mathematics and physics. The conference was attended by many of Tony's close scientific friends from all over the world, and most talks were presented by his past and present collaborators. This volume contains the proceedings of the meeting and consists of 24 refereed research papers in the fields of statistical mechanics, condensed matter physics and combinatorics. These papers provide an excellent illustration of the breadth and scope of Tony's work. The very first contribution, written by Stu Whittington, contains an overview of the many scientific achievements of Tony over the past 40 years in mathematics and physics. The organizing committee, consisting of Richard Brak, Aleks Owczarek, Jan de Gier, Emma Lockwood, Andrew Rechnitzer and Ole Warnaar, gratefully acknowledges the Australian Mathematical Society (AustMS), the Australian Mathematical Sciences Institute (AMSI), the ARC Centre of Excellence for Mathematics and Statistics of Complex Systems (MASCOS), the ARC Complex Open Systems Research Network (COSNet), the Institute of Physics (IOP) and the Department of Mathematics and Statistics of The University of Melbourne for financial support in organizing the conference. Tony, we hope that your future years in mathematics will be numerous. Count yourself lucky! Tony Guttman

  7. Developing workshop module of realistic mathematics education: Follow-up workshop

    Science.gov (United States)

    Palupi, E. L. W.; Khabibah, S.

    2018-01-01

    Realistic Mathematics Education (RME) is a learning approach which fits the aim of the curriculum. The success of RME in teaching mathematics concepts, triggering students’ interest in mathematics and teaching high order thinking skills to the students will make teachers start to learn RME. Hence, RME workshop is often offered and done. This study applied development model proposed by Plomp. Based on the study by RME team, there are three kinds of RME workshop: start-up workshop, follow-up workshop, and quality boost. However, there is no standardized or validated module which is used in that workshops. This study aims to develop a module of RME follow-up workshop which is valid and can be used. Plopm’s developmental model includes materials analysis, design, realization, implementation, and evaluation. Based on the validation, the developed module is valid. While field test shows that the module can be used effectively.

  8. Creating Fantastic PI Workshops

    Energy Technology Data Exchange (ETDEWEB)

    Biedermann, Laura B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Clark, Blythe G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Colbert, Rachel S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dagel, Amber Lynn [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gupta, Vipin P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hibbs, Michael R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Perkins, David Nikolaus [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); West, Roger Derek [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-10-01

    The goal of this SAND report is to provide guidance for other groups hosting workshops and peerto-peer learning events at Sandia. Thus this SAND report provides detail about our team structure, how we brainstormed workshop topics and developed the workshop structure. A Workshop “Nuts and Bolts” section provides our timeline and check-list for workshop activities. The survey section provides examples of the questions we asked and how we adapted the workshop in response to the feedback.

  9. Workshops Increase Students' Proficiency at Identifying General and APA-Style Writing Errors

    Science.gov (United States)

    Jorgensen, Terrence D.; Marek, Pam

    2013-01-01

    To determine the effectiveness of 20- to 30-min workshops on recognition of errors in American Psychological Association-style writing, 58 introductory psychology students attended one of the three workshops (on grammar, mechanics, or references) and completed error recognition tests (pretest, initial posttest, and three follow-up tests). As a…

  10. Workshop on High Power ICH Antenna Designs for High Density Tokamaks

    Science.gov (United States)

    Aamodt, R. E.

    1990-02-01

    A workshop in high power ICH antenna designs for high density tokamaks was held to: (1) review the data base relevant to the high power heating of high density tokamaks; (2) identify the important issues which need to be addressed in order to ensure the success of the ICRF programs on CIT and Alcator C-MOD; and (3) recommend approaches for resolving the issues in a timely realistic manner. Some specific performance goals for the antenna system define a successful design effort. Simply stated these goals are: couple the specified power per antenna into the desired ion species; produce no more than an acceptable level of RF auxiliary power induced impurities; and have a mechanical structure which safely survives the thermal, mechanical and radiation stresses in the relevant environment. These goals are intimately coupled and difficult tradeoffs between scientific and engineering constraints have to be made.

  11. Workshop Report On Sustainable Urban Development

    Science.gov (United States)

    Langhoff, Stephanie; Martin, Gary; Barone, Larry; Wagener, Wolfgang

    2010-01-01

    The key workshop goal was to explore and document how NASA technologies, such as remote sensing, climate modeling, and high-end computing and visualization along with NASA assets such as Earth Observing Satellites (EOS) and Unmanned Aerial Vehicles (UAVs) can contribute to creating and managing a sustainable urban environment. The focus was on the greater Bay Area, but many aspects of the workshop were applicable to urban management at the local, regional and global scales. A secondary goal was to help NASA better understand the problems facing urban managers and to make city leaders in the Bay Area more aware of NASA's capabilities. By bringing members of these two groups together we hope to see the beginnings of new collaborations between NASA and those faced with instituting sustainable urban management in Bay Area cities.

  12. Diversifying Geoscience by Preparing Faculty as Workshop Leaders to Promote Inclusive Teaching and Inclusive Geoscience Departments

    Science.gov (United States)

    Macdonald, H.; Manduca, C. A.; Beane, R. J.; Doser, D. I.; Ebanks, S. C.; Hodder, J.; McDaris, J. R.; Ormand, C. J.

    2017-12-01

    Efforts to broaden participation in the geosciences require that faculty implement inclusive practices in their teaching and their departments. Two national projects are building the capacity for faculty and departments to implement inclusive practices. The NAGT/InTeGrate Traveling Workshops Program (TWP) and the Supporting and Advancing Geoscience Education in Two-Year Colleges (SAGE 2YC) project each prepares a cadre of geoscience educators to lead workshops that provide opportunities for faculty and departments across the country to enhance their abilities to implement inclusive teaching practices and develop inclusive environments with the goal of increasing diversity in the geosciences. Both projects prepare faculty to design and lead interactive workshops that build on the research base, emphasize practical applications and strategies, enable participants to share their knowledge and experience, and include time for reflection and action planning. The curriculum common to both projects includes a framework of support for the whole student, supporting all students, data on diversity in the geosciences, and evidence-based strategies for inclusive teaching and developing inclusive environments that faculty and departments can implement. Other workshop topics include classroom strategies for engaging all students, addressing implicit bias and stereotype threat, and attracting diverse students to departments or programs and helping them thrive. Online resources for each project provide support beyond the workshops. The TWP brings together educators from different institutional types and experiences to develop materials and design a workshop offered to departments and organizations nationwide that request the workshop; the workshop leaders then customize the workshop for that audience. In SAGE 2YC, a team of leaders used relevant literature to develop workshop materials intended for re-use, and designed a workshop session for SAGE 2YC Faculty Change Agents, who

  13. Proceedings of the 1981 subseabed disposal program. Annual workshop

    International Nuclear Information System (INIS)

    1982-01-01

    The 1981 Annual Workshop was the twelfth meeting of the principal investigators and program management personnel participating in the Subseabed Disposal Program (SDP). The first workshop was held in June 1973, to address the development of a program (initially known as Ocean Basin Floors Program) to assess the deep sea disposal of nuclear wastes. Workshops were held semi-annually until late 1977. Since November 1977, the workshops have been conducted following the end of each fiscal year so that the program participants could review and critique the total scope of work. This volume contains a synopsis, as given by each Technical Program Coordinator, abstracts of each of the talks, and copies of the visual materials, as presented by each of the principal investigators, for each of the technical elements of the SDP for the fiscal year 1981. The talks were grouped under the following categories; general topics; site studies; thermal response studies; emplacement studies; systems analysis; chemical response studies; biological oceanography studies; physical oceanographic studies; instrumentation development; transportation studies; social environment; and international seabed disposal

  14. Proceedings of the 1981 subseabed disposal program. Annual workshop

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    The 1981 Annual Workshop was the twelfth meeting of the principal investigators and program management personnel participating in the Subseabed Disposal Program (SDP). The first workshop was held in June 1973, to address the development of a program (initially known as Ocean Basin Floors Program) to assess the deep sea disposal of nuclear wastes. Workshops were held semi-annually until late 1977. Since November 1977, the workshops have been conducted following the end of each fiscal year so that the program participants could review and critique the total scope of work. This volume contains a synopsis, as given by each Technical Program Coordinator, abstracts of each of the talks, and copies of the visual materials, as presented by each of the principal investigators, for each of the technical elements of the SDP for the fiscal year 1981. The talks were grouped under the following categories; general topics; site studies; thermal response studies; emplacement studies; systems analysis; chemical response studies; biological oceanography studies; physical oceanographic studies; instrumentation development; transportation studies; social environment; and international seabed disposal.

  15. 75 FR 16157 - Pharmaceutical Supply Chain; Public Workshop

    Science.gov (United States)

    2010-03-31

    ... supply of high quality, safe, and effective drug products and drug ingredients depends upon a series of... patients. Through a series of plenary sessions and working group breakout sessions, the workshop will... environment. Share improvements in programs and technology. Identify any barriers to securing the entire...

  16. Background Document for Workshop no.3 of Forest Carbon Management Workshop Series

    International Nuclear Information System (INIS)

    Griss, P.

    2002-01-01

    Pollution Probe has organized a series of workshops on forest carbon management (FCM) in Canada in order to examine the opportunities, policies and infrastructure for Canada. This report summarizes the events of the third workshop which explored the verification of carbon stocks in forests. It also incorporates the results of the first 2 workshops. There are substantial opportunities for greenhouse gas (GHG) emitters to obtain carbon credits through FCM. Canada, a proponent for the eligibility of FCM under the Kyoto Protocol, must develop these opportunities domestically although policies and infrastructure needed to support FCM activities are not yet clearly identified. The Kyoto Protocol allows developed countries to use international emissions trading to help meet emissions commitments. Details for emissions trading in Canada are still being negotiated and an effective forest-based methodology for carbon dioxide equivalent credit creation must be developed. This paper reviewed the role of forests in creating or canceling out removal units (RMUs) in deforestation, afforestation, reforestation, and forest management. From an FCM perspective, buyers of carbon credits have several choices in the development of their offset portfolio, including: (1) energy type versus carbon sinks, (2) forest sinks versus agricultural/soil sinks, (3) domestic projects versus international projects, and (4) Joint Implementation projects in developed countries versus Clean Development Mechanism projects in developing countries. tabs., figs., appendices

  17. Biopower Technical Strategy Workshop Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2010-12-01

    Biopower is electricity produced from a wide range of biomass (organic materials found in wood, plants, agricultural waste and other materials). Biomass is a base load renewable energy source with high availability for electricity production. To explore opportunities for biopower in the United States, the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy Biomass Program conducted the Biopower Technical Strategy Workshop in Denver, Colorado, on December 2–3, 2009. This report summarizes the results of the workshop, which focused on challenges to the expanded use of biopower and the possible solutions, including technology research, development, and demonstration (RD&D) as well as policies and other market transformation mechanisms.

  18. Report from the 6th Workshop on Extremely Large Databases

    Directory of Open Access Journals (Sweden)

    Daniel Liwei Wang

    2013-05-01

    Full Text Available Petascale data management and analysis remain one of the main unresolved challenges in today's computing. The 6th Extremely Large Databases workshop was convened alongside the XLDB conference to discuss the challenges in the health care, biology, and natural resources communities. The role of cloud computing, the dominance of file-based solutions in science applications, in-situ and predictive analysis, and commercial software use in academic environments were discussed in depth as well. This paper summarizes the discussions of this workshop.

  19. A technology-enhanced patient case workshop.

    Science.gov (United States)

    Pai, Vinita B; Kelley, Katherine A; Bellebaum, Katherine L

    2009-08-28

    To assess the impact of technology-based changes on student learning, skill development, and satisfaction in a patient-case workshop. A new workshop format for a course was adopted over a 3-year period. Students received and completed patient cases and obtained immediate performance feedback in class instead of preparing the case prior to class and waiting for instructors to grade and return their cases. The cases were designed and accessed via an online course management system. Student satisfaction was measured using end-of-course surveys. The impact of the technology-based changes on student learning, problem-solving, and critical-thinking skills was measured and compared between the 2 different course formats by assessing changes in examination responses. Three advantages to the new format were reported: real-life format in terms of time constraint for responses, a team learning environment, and expedient grading and feedback. Students overwhelmingly agreed that the new format should be continued. Students' examination scores improved significantly under the new format. The change in delivery of patient-case workshops to an online, real-time system was well accepted and resulted in enhanced learning, critical thinking, and problem-solving skills.

  20. Workshop on SHAring and Reusing architectural Knowledge: (SHARK 2011)

    NARCIS (Netherlands)

    Avgeriou, P.; Lago, P.; Kruchten, P.; Taylor, R.N.; Gall, H.; Medvidovic, N.

    2011-01-01

    Architectural Knowledge (AK) is defined as the integrated representation of the software architecture of a software-intensive system or family of systems along with architectural decisions and their rationale, external influence and the development environment. The SHARK workshop series focuses on

  1. The Efficient Use of Vector Computers with Emphasis on Computational Fluid Dynamics : a GAMM-Workshop

    CERN Document Server

    Gentzsch, Wolfgang

    1986-01-01

    The GAMM Committee for Numerical Methods in Fluid Mechanics organizes workshops which should bring together experts of a narrow field of computational fluid dynamics (CFD) to exchange ideas and experiences in order to speed-up the development in this field. In this sense it was suggested that a workshop should treat the solution of CFD problems on vector computers. Thus we organized a workshop with the title "The efficient use of vector computers with emphasis on computational fluid dynamics". The workshop took place at the Computing Centre of the University of Karlsruhe, March 13-15,1985. The participation had been restricted to 22 people of 7 countries. 18 papers have been presented. In the announcement of the workshop we wrote: "Fluid mechanics has actively stimulated the development of superfast vector computers like the CRAY's or CYBER 205. Now these computers on their turn stimulate the development of new algorithms which result in a high degree of vectorization (sca1ar/vectorized execution-time). But w...

  2. Motivational interviewing workshop in a virtual world: learning as avatars.

    Science.gov (United States)

    Shershneva, Marianna; Kim, Ji-Hye; Kear, Cynthia; Heyden, Robin; Heyden, Neil; Lee, Jay; Mitchell, Suzanne

    2014-04-01

    Limited research has been done to understand outcomes of continuing medical education offered in three-dimensional, immersive virtual worlds. We studied a case of a virtual world workshop on motivational interviewing (MI) applied to smoking cessation counseling and its educational impact. To facilitate content development and evaluation, we specified desired MI competencies. The workshop consisted of three sessions, which included lectures, practice with standardized patients, and chat interactions. Data were collected from 13 primary care physicians and residents through workshop observation, and pre- and 3-month post-workshop telephone/Skype interviews and interactions with standardized patients. Interactions with standardized patients were assessed by an expert using a validated MI tool and by standardized patients using a tool developed for this study. For 11 participants who attended two or three sessions, we conducted paired-samples t tests comparing mean differences between the competency scores before and after the workshop. Expert assessment showed significant improvement on six of seven MI competencies. All participants reported learning new knowledge and skills, and nine described incorporating new learning into their clinical practice. Practicing MI with standardized patients and/or observing others' practice appeared to be the most helpful workshop component. The evaluated workshop had positive impact on participants' competencies and practice as related to MI applied to smoking cessation counseling. Our findings support further exploration of three-dimensional virtual worlds as learning environments for continuing medical education.

  3. 1996 DOE technical standards program workshop: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOE representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.

  4. Eighth CW and High Average Power RF Workshop

    CERN Document Server

    2014-01-01

    We are pleased to announce the next Continuous Wave and High Average RF Power Workshop, CWRF2014, to take place at Hotel NH Trieste, Trieste, Italy from 13 to 16 May, 2014. This is the eighth in the CWRF workshop series and will be hosted by Elettra - Sincrotrone Trieste S.C.p.A. (www.elettra.eu). CWRF2014 will provide an opportunity for designers and users of CW and high average power RF systems to meet and interact in a convivial environment to share experiences and ideas on applications which utilize high-power klystrons, gridded tubes, combined solid-state architectures, high-voltage power supplies, high-voltage modulators, high-power combiners, circulators, cavities, power couplers and tuners. New ideas for high-power RF system upgrades and novel ways of RF power generation and distribution will also be discussed. CWRF2014 sessions will start on Tuesday morning and will conclude on Friday lunchtime. A visit to Elettra and FERMI will be organized during the workshop. ORGANIZING COMMITTEE (OC): Al...

  5. 11th International Workshop on Railway Noise

    CERN Document Server

    Anderson, David; Gautier, Pierre-Etienne; Iida, Masanobu; Nelson, James; Thompson, David; Tielkes, Thorsten; Towers, David; Vos, Paul

    2015-01-01

    The book reports on the 11th International Workshop on Railway Noise, held on 9 – 13 September, 2013, in Uddevalla, Sweden. The event, which was jointly organized by the Competence Centre Chalmers Railway Mechanics (CHARMEC) and the Departments of Applied Mechanics and Applied Acoustics at Chalmers University of Technology in Gothenburg, Sweden, covered a broad range of topics in the field of railway noise and vibration, including: prospects, legal regulations and perceptions; wheel and rail noise; prediction, measurements and monitoring; ground-borne vibration; squeal noise and structure-borne noise; and aerodynamic noise generated by high-speed trains. Further topics included: resilient track forms; grinding, corrugation and roughness; and interior noise and sound barriers. This book, which consists of a collection of peer-reviewed papers originally submitted to the workshop, not only provides readers with an overview of the latest developments in the field, but also offers scientists and engineers essent...

  6. Proceedings of the eleventh international workshop on ceramic breeder blanket interactions

    International Nuclear Information System (INIS)

    Enoeda, Mikio

    2004-07-01

    This report is the Proceedings of 'the Eleventh International Workshop on Ceramic Breeder Blanket Interactions' which was held as a workshop on ceramic breeders Under the IEA Implementing Agreement on the Nuclear Technology of Fusion Reactors, and the Japan-US Fusion Collaboration Framework. This workshop was held in Tokyo, Japan on December 15-17, 2003. About thirty experts from China, EU, Japan, Korea, Latvia, Russia and USA attended the workshop. The scope of the workshop included 1) evolutions in ceramic breeder blanket design, 2) progress in ceramic breeder material development, 3) irradiation testing, 4) breeder material properties, 5) out-of-pile pebble bed experiment, 6) modeling of the thermal, mechanical and tritium transfer behavior of pebble beds and 7) interfacing issues of solid breeder blanket. In the workshop, information exchange was performed for designs of solid breeder blankets and test blankets in EU, Russia and Japan, recent results of irradiation tests, HICU, EXOTIC-8 and the irradiation tests by IVV-2M, modeling study on tritium release behavior of Li 2 TiO 3 and so on, fabrication technology developments and characterization of the Li 2 TiO 3 and Li 4 SiO 4 pebbles, research on measurements and modeling of thermo-mechanical behaviors of Li 2 TiO 3 and Li 4 SiO 4 pebbles, and interfacing issues, such as, fabrication technology for blanket box structure, neutronics experiments of blanket mockups by fusion neutron source and tritium recovery system. The 26 of the presented papers are indexed individually. (J.P.N.)

  7. Report of the advanced neutron source (ANS) aluminum cladding corrosion workshop

    International Nuclear Information System (INIS)

    Hanson, G.H.; Gibson, G.W.; Griess, J.C.; Pawel, R.E.; Pace, N.E.; Ryskamp, J.M.

    1989-02-01

    The Advanced Neutron Source (ANS) Corrosion Workshop on aluminum cladding corrosion in reactor environments is summarized. The Workshop was held to examine the aluminum cladding oxidation studies being conducted in support of the ANS design. This report was written principally to provide a record of the ideas and judgments expressed by the workshop attendees. The ANS operating heat flux is significantly higher than that in existing reactors, and early experiments indicate that there may be an aluminum cladding oxidation problem unique to higher heat fluxes or associated cladding temperatures that, if not solved, may limit the operation of the ANS to unacceptably low power levels. A brief description of the information presented by each speaker is included along with a compilation of the most significant ideas and recommended research areas. The appendixes contain a copy of the workshop agenda and a list of attendees

  8. Workshops as a Research Methodology

    Science.gov (United States)

    Ørngreen, Rikke; Levinsen, Karin

    2017-01-01

    This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice, and workshops as a research methodology. Focusing primarily on…

  9. Proceedings of the workshop on negative ion formation and beam handling

    International Nuclear Information System (INIS)

    Takagi, A.; Mori, Y.

    1993-01-01

    The Workshop on Negative Ion Formation and Beam Handling was held at National Laboratory for High Energy Physics (KEK) on July 27 and 28. More than 40 participants attended the workshop. Negative ions and beams are becoming very useful and attractive in many fields of science, in particular in accelerator science and nuclear fusion and various types of negative ion sources have been developed so far. However, the fundamental mechanisms of negative ion generation in the ion sources and of beam formation are still not clear. This workshop aimed to discuss the problems on these points in details. (J.P.N.)

  10. Built Environment Wind Turbine Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Smith, J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Forsyth, T. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sinclair, K. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Oteri, F. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2012-11-01

    The market currently encourages BWT deployment before the technology is ready for full-scale commercialization. To address this issue, industry stakeholders convened a Rooftop and Built-Environment Wind Turbine Workshop on August 11 - 12, 2010, at the National Wind Technology Center, located at the U.S. Department of Energy’s National Renewable Energy Laboratory in Boulder, Colorado. This report summarizes the workshop.

  11. Telemedicine in Space Flight - Summary of a NASA Workshop

    Science.gov (United States)

    Barsten, K. N.; Watkins, S. D.; Otto, C.; Baumann, D. K.

    2011-01-01

    The Exploration Medical Capability Element of the Human Research Program at NASA Johnson Space Center hosted the Telemedicine Workshop in January 2011 to discuss the medical operational concept for a crewed mission to a near-Earth asteroid (NEA) and to identify areas for future work and collaboration. With the increased likelihood of a medical incident on a long duration exploration mission to a near-Earth asteroid, as well as the fact that there will likely be limited medical capabilities and resources available to diagnose and treat medical conditions, it is anticipated that a more structured use of telemedicine will become highly desirable. The workshop was convened to solicit expert opinion on current telemedicine practices and on medical care in remote environments. Workshop Objectives: The workshop brought together leaders in telemedicine and remote medicine from The University of Texas Medical Branch, Henry Ford Hospital, Ontario Telemedicine Network, U.S. Army Institute of Surgical Research, University of Miami, American Telemedicine Association, Doctors Without Borders, and the Pan American Health Organization. The primary objectives of the workshop were to document the medical operations concept for a crewed mission to a NEA, to determine gaps between current capabilities and the capabilities outlined in the operations concept, to identify research required to close these gaps, and to discuss potential collaborations with external-to-NASA organizations with similar challenges. Summary of Discussions and Conclusions: The discussions held during the workshop and the conclusions reached by the workshop participants were grouped into seven categories: Crew Medical Officers, Patient Area in Spacecraft, Training, Electronic Medical Records, Intelligent Care Systems, Consultation Protocols, Prophylactic Surgical Procedures, and Data Prioritization. The key points discussed under each category will be presented.

  12. Comedy workshop: an enjoyable way to develop multiple-choice questions.

    Science.gov (United States)

    Droegemueller, William; Gant, Norman; Brekken, Alvin; Webb, Lynn

    2005-01-01

    To describe an innovative method of developing multiple-choice items for a board certification examination. The development of appropriate multiple-choice items is definitely more of an art, rather than a science. The comedy workshop format for developing questions for a certification examination is similar to the process used by comedy writers composing scripts for television shows. This group format dramatically diminishes the frustrations faced by an individual question writer attempting to create items. The vast majority of our comedy workshop participants enjoy and prefer the comedy workshop format. It provides an ideal environment in which to teach and blend the talents of inexperienced and experienced question writers. This is a descriptive article, in which we suggest an innovative process in the art of creating multiple-choice items for a high-stakes examination.

  13. MOOC Design Workshop

    DEFF Research Database (Denmark)

    Nørgård, Rikke Toft; Mor, Yishay; Warburton, Steven

    2016-01-01

    For the last two years we have been running a series of successful MOOC design workshops. These workshops build on previous work in learning design and MOOC design patterns. The aim of these workshops is to aid practitioners in defining and conceptualising educational innovations (predominantly......, but not exclusively MOOCs) which are based on an empathic user-centered view of the target learners and teachers. In this paper, we share the main principles, patterns and resources of our workshops and present some initial results for their effectiveness...

  14. Assessing the Interactivity and Prescriptiveness of Faculty Professional Development Workshops: The Real-Time Professional Development Observation Tool

    Science.gov (United States)

    Olmstead, Alice; Turpen, Chandra

    2016-01-01

    Professional development workshops are one of the primary mechanisms used to help faculty improve their teaching, and draw in many STEM instructors every year. Although workshops serve a critical role in changing instructional practices within our community, we rarely assess workshops through careful consideration of how they engage faculty.…

  15. Peripheral Auditory Mechanisms

    CERN Document Server

    Hall, J; Hubbard, A; Neely, S; Tubis, A

    1986-01-01

    How weIl can we model experimental observations of the peripheral auditory system'? What theoretical predictions can we make that might be tested'? It was with these questions in mind that we organized the 1985 Mechanics of Hearing Workshop, to bring together auditory researchers to compare models with experimental observations. Tbe workshop forum was inspired by the very successful 1983 Mechanics of Hearing Workshop in Delft [1]. Boston University was chosen as the site of our meeting because of the Boston area's role as a center for hearing research in this country. We made a special effort at this meeting to attract students from around the world, because without students this field will not progress. Financial support for the workshop was provided in part by grant BNS- 8412878 from the National Science Foundation. Modeling is a traditional strategy in science and plays an important role in the scientific method. Models are the bridge between theory and experiment. Tbey test the assumptions made in experim...

  16. 77 FR 12313 - Food Labeling Workshop; Public Workshop

    Science.gov (United States)

    2012-02-29

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2012-N-0001] Food Labeling Workshop; Public Workshop AGENCY: Food and Drug Administration, HHS. ACTION: Notice of... District Office (DALDO), in collaboration with Oklahoma State University (OSU), Robert M. Kerr Food...

  17. 75 FR 29775 - Food Labeling Workshop; Public Workshop

    Science.gov (United States)

    2010-05-27

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES [Docket No. FDA-2010-N-0001] Food and Drug Administration Food Labeling Workshop; Public Workshop AGENCY: Food and Drug Administration, HHS. ACTION: Notice of...: Institute of Food Science & Engineering, University of Arkansas, 2650 North Young Ave., Fayetteville, AR...

  18. Beam instability Workshop - plenary sessions

    International Nuclear Information System (INIS)

    2001-01-01

    The purpose of this workshop was to provide a review of the mechanisms of limiting beam instabilities, their cures, including feedback, and beam measurement for synchrotron radiation light sources. 12 plenary sessions took place whose titles are: 1) challenging brilliance and lifetime issues with increasing currents; 2) limiting instabilities in multibunch; 3) experience from high currents in B factories; 4) longitudinal dynamics in high intensity/bunch; 5) Transverse instabilities for high intensity/bunch; 6) working group introduction from ESRF experience; 7) impedance modelling: simulations, minimization; 8) report on the broadband impedance measurements and modelling workshop; 9) feedback systems for synchrotron light sources; 10) beam instabilities diagnostics; 11) harmonic cavities: the pros and cons; and 12) experimental study of fast beam-ion instabilities at PLS. This document gathers the 12 articles that were presented during these sessions

  19. Beam instability Workshop - plenary sessions

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The purpose of this workshop was to provide a review of the mechanisms of limiting beam instabilities, their cures, including feedback, and beam measurement for synchrotron radiation light sources. 12 plenary sessions took place whose titles are: 1) challenging brilliance and lifetime issues with increasing currents; 2) limiting instabilities in multibunch; 3) experience from high currents in B factories; 4) longitudinal dynamics in high intensity/bunch; 5) Transverse instabilities for high intensity/bunch; 6) working group introduction from ESRF experience; 7) impedance modelling: simulations, minimization; 8) report on the broadband impedance measurements and modelling workshop; 9) feedback systems for synchrotron light sources; 10) beam instabilities diagnostics; 11) harmonic cavities: the pros and cons; and 12) experimental study of fast beam-ion instabilities at PLS. This document gathers the 12 articles that were presented during these sessions.

  20. Systems Engineering Workshops | Wind | NREL

    Science.gov (United States)

    Workshops Systems Engineering Workshops The Wind Energy Systems Engineering Workshop is a biennial topics relevant to systems engineering and the wind industry. The presentations and agendas are available for all of the Systems Engineering Workshops: The 1st NREL Wind Energy Systems Engineering Workshop

  1. Proceedings of the 3rd workshop on ion-beam-applied biology

    International Nuclear Information System (INIS)

    Matsuhashi, Shinpei; Suzui, Nobuo; Ishioka, Noriko S.

    2005-09-01

    In order to encourage research on biological application using ion beam at TIARA, we have had the workshop on ion beam applied biology at JAERI Takasaki every year since 2002. The 3rd workshop titled 'Future development of plant research using the positron imaging method - Understanding the plant functions through visualization images-' is held this year. The main topics of this workshop are introduction of the latest studies on the assimilation and transportation of nutrients by plant using positron imaging method. Further, related technologies of the positron imaging and prospect of positron imaging for is discussed. We hope this workshop popularizes positron imaging technology for plants, accelerates cooperation between industries, universities and governmental institutes and contributes future projects of understanding of the physiological functions of plants using the positron imaging method. This workshop was held on September 29th 2004, hosted by JAERI Takasaki and cooperated by The Japan Radioisotope Association, Japanese Society of Soil Science and Plant Nutrition. The Japanese Society of Plant Physiologists, Atomic Energy Society of Japan, The Japanese Society of Nuclear and Radiochemical Science and The Ion Beam Breeding Society. There were 85 participants from not only universities and laboratories but also private company developing the environment conservation technology, so on. Highly qualified presentations were given on biological studies with ion beam, on analysis of plant functions using the positron imaging method and on supporting technology for the positron imaging monitoring. Progress in the elucidation of plant functions is expected to develop the technologies for production of safe provisions and conservation of environment with plant. The 14 of the presented papers are indexed individually. (J.P.N.)

  2. A workshop on enhanced national capability for neutron scattering

    Energy Technology Data Exchange (ETDEWEB)

    Hurd, Alan J [Los Alamos National Laboratory; Rhyne, James J [Los Alamos National Laboratory; Lewis, Paul S [Los Alamos National Laboratory

    2009-01-01

    This two-day workshop will engage the international neutron scattering community to vet and improve the Lujan Center Strategic Plan 2007-2013 (SP07). Sponsored by the LANL SC Program Office and the University of California, the workshop will be hosted by LANSCE Professor Sunny Sinha (UCSD). Endorsement by the Spallation Neutron Source will be requested. The discussion will focus on the role that the Lujan Center will play in the national neutron scattering landscape assuming full utilization of beamlines, a refurbished LANSCE, and a 1.4-MW SNS. Because the Lujan Strategic Plan is intended to set the stage for the Signature Facility era at LANSCE, there will be some discussion of the long-pulse spallation source at Los Alamos. Breakout groups will cover several new instrument concepts, upgrades to present instruments, expanded sample environment capabilities, and a look to the future. The workshop is in keeping with a request by BES to update the Lujan strategic plan in coordination with the SNS and the broader neutron community. Workshop invitees will be drawn from the LANSCE User Group and a broad cross section of the US, European, and Pacific Rim neutron scattering research communities.

  3. Applied antineutrino physics workshop

    International Nuclear Information System (INIS)

    Lund, James C.

    2008-01-01

    This workshop is the fourth one of a series that includes the Neutrino Geophysics Conference at Honolulu, Hawaii, which I attended in 2005. This workshop was organized by the Astro-Particle and Cosmology laboratory in the recently opened Condoret building of the University of Paris. More information, including copies of the presentations, on the workshop is available on the website: www.apc.univ-paris7.fr/AAP2007/. The workshop aims at opening neutrino physics to various fields such that it can be applied in geosciences, nuclear industry (reactor and spent fuel monitoring) and non-proliferation. The workshop was attended by over 60 people from Europe, USA, Asia and Brazil. The meeting was also attended by representatives of the Comprehensive nuclear-Test Ban Treaty (CTBT) and the International Atomic Energy Agency (IAEA). The workshop also included a workshop dinner on board of a river boat sailing the Seine river

  4. Ecotoxicological test systems proceedings of a series of workshops

    Energy Technology Data Exchange (ETDEWEB)

    Hammons, A.S. (ed.)

    1981-06-01

    A series of six workshops was conducted by the Environmental Sciences Division, Oak Ridge National Laboratory, to identify laboratory methods and data evaluation techniques for predicting the environmental effects of chemical substances. Methods were evaluated for their potential for standardization and for use in the ecological hazard and risk assessment processes under the Toxic Substances Control Act. The workshops addressed assessment and policy requirements of multispecies toxicology test procedures, mathematical models useful in hazard and risk assessments, and methods for measuring effects of chemicals on terrestrial and aquatic population interactions and ecosystem properties. The workshops were primarily used as a mechanism to gather information about research in progress. This information was part of the data base used to prepare a critical review of laboratory methods for ecological toxicology.

  5. Ecotoxicological test systems proceedings of a series of workshops

    International Nuclear Information System (INIS)

    Hammons, A.S.

    1981-06-01

    A series of six workshops was conducted by the Environmental Sciences Division, Oak Ridge National Laboratory, to identify laboratory methods and data evaluation techniques for predicting the environmental effects of chemical substances. Methods were evaluated for their potential for standardization and for use in the ecological hazard and risk assessment processes under the Toxic Substances Control Act. The workshops addressed assessment and policy requirements of multispecies toxicology test procedures, mathematical models useful in hazard and risk assessments, and methods for measuring effects of chemicals on terrestrial and aquatic population interactions and ecosystem properties. The workshops were primarily used as a mechanism to gather information about research in progress. This information was part of the data base used to prepare a critical review of laboratory methods for ecological toxicology

  6. Experience of a workshop on communication skills in health professional education

    Directory of Open Access Journals (Sweden)

    Khalid U Al-Umran

    2009-01-01

    Full Text Available Background: The teaching of communication skills is gaining increasing attention. However, the opportunities for faculty development are limited. This study highlights an attempt by the Medical Education Unit, King Fahd Hospital of the University, Al-Khobar, to raise the awareness of faculty to this vital area by organizing a one-day workshop. Method: A one-day workshop was organized to improve the awareness of the participants to the role of communication skills such as doctor-patient interaction, breaking bad news, counseling and conflict management. In all, 168 participants consisting of faculty members, interns and students, both male and female participated. The sessions included interactive lectures, video demonstrations and role play. Results: The feedback from the participants indicated that the objectives of the workshop were largely realized. The presentations by speakers were of high quality. However, the participants wanted more small group activities and video-demonstrations that were relevant to the local environment. Conclusion: By and large, the one-day workshop was found to be a practical model for an initial attempt to raise awareness. Further work is needed to organize more intensive workshops on specific issues related to communication skills.

  7. Aging phenomena in gaseous detectors - perspectives from the 2001 workshop

    CERN Document Server

    Hohlmann, M; Tesch, N; Titov, M

    2002-01-01

    High-Energy Physics experiments are currently entering a new era which requires the operation of gaseous particle detectors at unprecedented high rates and integrated particle fluxes. Full functionality of such detectors over the lifetime of an experiment in a harsh radiation environment is of prime concern. New classes of gaseous detectors such as large-scale straw-type detectors, Micro-pattern Gas Detectors, and resistive plate chambers--each with their own specific aging characteristics--have evolved since the first workshop on wire chamber aging was held at LBL, Berkeley in 1986. The 2001 workshop provided a forum to review the progress since 1986 in understanding aging effects and to exchange recent experiences. A summary of the main results reported at the 2001 workshop is presented providing a systematic review of aging effects in state-of-the-art detectors.

  8. Peer-Review Writing Workshops in College Courses: Students’ Perspectives about Online and Classroom Based Workshops

    Directory of Open Access Journals (Sweden)

    Erin B. Jensen

    2016-11-01

    Full Text Available Peer-review workshops are commonly used in writing courses as a way for students to give their peers feedback as well as help their own writing. Most of the research on peer-review workshops focuses on workshops held in traditional in-person courses, with less research on peer-review workshops held online. Students in a freshman writing course experienced both a classroom based writing workshop and an online workshop and then took a survey about their experiences. The majority of the students preferred the online writing workshop because of the convenience of the workshop and being able to post anonymous reviews. Students whom preferred the traditional in-person writing workshop liked being able to talk with their peers about their papers. This research article focuses on the students’ responses and experiences with traditional and online peer-reviews.

  9. Workshop on Seismic Performance of Underground Facilities: proceedings

    International Nuclear Information System (INIS)

    Marine, I.W.

    1982-01-01

    A workshop entitled Seismic Performance of Underground Facilities was held in Augusta, GA, February 11-13, 1981. The Workshop was organized and conducted by The Savannah River Laboratory of E.I. du Pont de Nemours and Co. and was sponsored by The Department of Energy and The Office of Nuclear Waste Isolation of Battelle. The objective of the Workshop was to review and assess the state of the science of determining and predicting damage to underground facilities from earthquakes, with particular emphasis on the ultimate goal of developing criteria for siting and design of mined geologic nuclear waste repositories. The Workshop consisted of a day of presentations in the categories of Introduction, Data Collection and Analysis, Modeling, and Design. The second day consisted of assessments of the science by subgroups in the subjects of Seismology; Rock Mechanics and Hydrology; Modeling; Licensing, Siting, and Tectonics; and Design. Most Scientists in attendance believed that enough was known of the subsurface effects of earthquakes to proceed with site selection, design, and licensing of a waste repository. There was, however, recognition of several items of research that would enhance the understanding of the subsurface effects of seismicity

  10. Automatic creation of simulation configuration. The SIPA workshop: SWORD

    International Nuclear Information System (INIS)

    Oudot, G.; Valembois, A.

    1994-01-01

    SWORD (Software Workshop Oriented towards Research and Development) is not only a software management system but also and mainly a software development system. The SWORD workshop is organised in hierarchical levels: (1) the automatic or manual creation of elementary models based on FORTRAN ANSI standard language; these models have interface variables structured in so-called connection points; Automatic model generators are used for the simulation of standard, repeated equipment: HYTHERNET covers the simulation of hydraulic, thermal, chemistry and activity; CONTRONET covers the simulation of I and C system, i.e. logic, protection and control systems; The capture of system topology for both generators is carried out on a graphic workstation under CAD system, (2) The models assembly generator, in charge of linking models (via connection points) and organizing their calling sequence in order to create a simulation application, (3) The configurations in charge of creation of external environment and of links between models assembly and external environment (connection with control desk, plant computer system, safety parameter display etc.), (4) The configuration generator which exports the simulation configuration to the target machine and generates the appropriate command for compilations and link editions; The workshop Administration ensures management, consistency checks are carried out at each step with warnings generated when applicable, and automatic chaining of the appropriate commands according to engineer request are available. (orig.) (4 refs., 4 figs.)

  11. MO-AB-210-03: Workshop

    International Nuclear Information System (INIS)

    Lu, Z.

    2015-01-01

    The goal of this ultrasound hands-on workshop is to demonstrate advancements in high intensity focused ultrasound (HIFU) and to demonstrate quality control (QC) testing in diagnostic ultrasound. HIFU is a therapeutic modality that uses ultrasound waves as carriers of energy. HIFU is used to focus a beam of ultrasound energy into a small volume at specific target locations within the body. The focused beam causes localized high temperatures and produces a well-defined regions of necrosis. This completely non-invasive technology has great potential for tumor ablation and targeted drug delivery. At the workshop, attendees will see configurations, applications, and hands-on demonstrations with on-site instructors at separate stations. The involvement of medical physicists in diagnostic ultrasound imaging service is increasing due to QC and accreditation requirements. At the workshop, an array of ultrasound testing phantoms and ultrasound scanners will be provided for attendees to learn diagnostic ultrasound QC in a hands-on environment with live demonstrations of the techniques. Target audience: Medical physicists and other medical professionals in diagnostic imaging and radiation oncology with interest in high-intensity focused ultrasound and in diagnostic ultrasound QC. Learning Objectives: Learn ultrasound physics and safety for HIFU applications through live demonstrations Get an overview of the state-of-the art in HIFU technologies and equipment Gain familiarity with common elements of a quality control program for diagnostic ultrasound imaging Identify QC tools available for testing diagnostic ultrasound systems and learn how to use these tools List of supporting vendors for HIFU and diagnostic ultrasound QC hands-on workshop: Philips Healthcare Alpinion Medical Systems Verasonics, Inc Zonare Medical Systems, Inc Computerized Imaging Reference Systems (CIRS), Inc. GAMMEX, Inc., Cablon Medical BV Steffen Sammet: NIH/NCI grant 5R25CA132822, NIH/NINDS grant 5R25NS

  12. ICP-MS Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Carman, April J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Eiden, Gregory C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-11-01

    This is a short document that explains the materials that will be transmitted to LLNL and DNN HQ regarding the ICP-MS Workshop held at PNNL June 17-19th. The goal of the information is to pass on to LLNL information regarding the planning and preparations for the Workshop at PNNL in preparation of the SIMS workshop at LLNL.

  13. 78 FR 33849 - Battery-Powered Medical Devices Workshop: Challenges and Opportunities; Public Workshop; Request...

    Science.gov (United States)

    2013-06-05

    ... after the public workshop on the Internet at http://www.fda.gov/MedicalDevices/NewsEvents/Workshops..., compact, and mobile, the number of battery-powered medical devices will continue to increase. While many...] Battery-Powered Medical Devices Workshop: Challenges and Opportunities; Public Workshop; Request for...

  14. Machine Learning Technologies and Their Applications for Science and Engineering Domains Workshop -- Summary Report

    Science.gov (United States)

    Ambur, Manjula; Schwartz, Katherine G.; Mavris, Dimitri N.

    2016-01-01

    The fields of machine learning and big data analytics have made significant advances in recent years, which has created an environment where cross-fertilization of methods and collaborations can achieve previously unattainable outcomes. The Comprehensive Digital Transformation (CDT) Machine Learning and Big Data Analytics team planned a workshop at NASA Langley in August 2016 to unite leading experts the field of machine learning and NASA scientists and engineers. The primary goal for this workshop was to assess the state-of-the-art in this field, introduce these leading experts to the aerospace and science subject matter experts, and develop opportunities for collaboration. The workshop was held over a three day-period with lectures from 15 leading experts followed by significant interactive discussions. This report provides an overview of the 15 invited lectures and a summary of the key discussion topics that arose during both formal and informal discussion sections. Four key workshop themes were identified after the closure of the workshop and are also highlighted in the report. Furthermore, several workshop attendees provided their feedback on how they are already utilizing machine learning algorithms to advance their research, new methods they learned about during the workshop, and collaboration opportunities they identified during the workshop.

  15. SPERA Workshop on environmental radioactivity, and the Workshop on Radiological Aspects of the Rehabilitiation of Contaminated Sites, June 1996

    International Nuclear Information System (INIS)

    Matthews, M.

    1996-01-01

    Since its inception in 1991, the membership of the South Pacific Environmental Radioactivity Association (SPERA) has grown steadily, with over 50 members now enrolled. Both the attendance and quality of the biennial SPERA Workshops have increased as the organisation has matured, with each meeting building on the previous one; Dunedin 1992, Canberra 1994, and now SPERA96 in Darwin. Forty three people attended SPERA96, the majority from within Australia from government departments (mines, energy, human services, and health), mining companies, universities, ANSTO, ARL, ERISS, EPA, AGSO, and AIMS; together with participants from Chile, French Polynesia, Ireland, Japan and New Zealand. The Workshop had the theme of: The measurement of natural, technologically enhanced, and artificial radioactivity in the environment: methods, surveys, and applications. Such a general theme attracted a wide range of papers. (author)

  16. Mechanisms, Transmissions and Applications

    CERN Document Server

    Corves, Burkhard

    2012-01-01

    The first Workshop on Mechanisms, Transmissions and Applications -- MeTrApp-2011 was organized by the Mechatronics Department at the Mechanical Engineering Faculty, “Politehnica” University of Timisoara, Romania, under the patronage of the IFToMM Technical Committees Linkages and Mechanical Controls and Micromachines. The workshop brought together researchers and students who work in disciplines associated with mechanisms science and offered a great opportunity for scientists from all over the world to present their achievements, exchange innovative ideas and create solid international links, setting the trend for future developments in this important and creative field. The topics treated in this volume are mechanisms and machine design, mechanical transmissions, mechatronic and biomechanic applications, computational and experimental methods, history of mechanism and machine science and teaching methods.

  17. Proceedings of the fourth annual geothermal conference and workshop

    Energy Technology Data Exchange (ETDEWEB)

    1980-12-01

    Thirty-eight papers are included. One was indexed previously for EDB. Separate abstracts were prepared for thirty-three papers and two were listed by title. Reports of two workshop discussion groups on Achieving Technical Performance and Obtaining a License and Protecting the Environment were not abstracted for EDB. (MHR)

  18. Third EC/ISOE workshop on occupational exposure management at nuclear power plants

    International Nuclear Information System (INIS)

    Bone, Mike; Morris, Simon

    2002-01-01

    The third workshop was jointly sponsored by the IAEA and OECD Nuclear Energy Agency. It was organised by the European Commission Directorate-General for the Environment, Nuclear Safety and Civil Protection and the ISOE European Regional Technical Centre. The workshop provided a forum for Health Physics practitioners and operators to exchange information and experience on occupational exposure issues at Nuclear Power Plants (NPPs). There were approximately 130 participants of whom 63% were from utilities, 11% from contractors and 26% from regulatory bodies

  19. Workshop Proceedings

    DEFF Research Database (Denmark)

    2012-01-01

    , the main focus there is on spoken languages in their written and spoken forms. This series of workshops, however, offers a forum for researchers focussing on sign languages. For the third time, the workshop had sign language corpora as its main topic. This time, the focus was on the interaction between...... corpus and lexicon. More than half of the papers presented contribute to this topic. Once again, the papers at this workshop clearly identify the potentials of even closer cooperation between sign linguists and sign language engineers, and we think it is events like this that contribute a lot to a better...

  20. Mechanisms of radionuclide transition in natural environment

    International Nuclear Information System (INIS)

    Pacyna, J.

    1974-01-01

    Mechanisms of radionuclide transition in various elements of the environment have been dealt with in an ecological aspect. The knowledge of the radionuclide propagation tracks will make possible to ascertain precisely causes and effects of the radiation and to reduce the contamination value. Particular attention has been paid to test methods. (author)

  1. Workshop report

    African Journals Online (AJOL)

    abp

    2017-09-14

    Sep 14, 2017 ... health: report of first EQUIST training workshop in Nigeria .... The difference between the before and after measurements was ... After the administration of the pre-workshop questionnaire the ... represent Likert rating scale of 1-5 points, where 1point = grossly .... Procedures Manual for the "Evaluating.

  2. Annotating public fungal ITS sequences from the built environment according to the MIxS-Built Environment standard – a report from a May 23-24, 2016 workshop (Gothenburg, Sweden

    Directory of Open Access Journals (Sweden)

    Kessy Abarenkov

    2016-09-01

    Full Text Available Recent molecular studies have identified substantial fungal diversity in indoor environments. Fungi and fungal particles have been linked to a range of potentially unwanted effects in the built environment, including asthma, decay of building materials, and food spoilage. The study of the built mycobiome is hampered by a number of constraints, one of which is the poor state of the metadata annotation of fungal DNA sequences from the built environment in public databases. In order to enable precise interrogation of such data – for example, “retrieve all fungal sequences recovered from bathrooms” – a workshop was organized at the University of Gothenburg (May 23-24, 2016 to annotate public fungal barcode (ITS sequences according to the MIxS-Built Environment annotation standard (http://gensc.org/mixs/. The 36 participants assembled a total of 45,488 data points from the published literature, including the addition of 8,430 instances of countries of collection from a total of 83 countries, 5,801 instances of building types, and 3,876 instances of surface-air contaminants. The results were implemented in the UNITE database for molecular identification of fungi (http://unite.ut.ee and were shared with other online resources. Data obtained from human/animal pathogenic fungi will furthermore be verified on culture based metadata for subsequent inclusion in the ISHAM-ITS database (http://its.mycologylab.org.

  3. Mechanics and model-based control of advanced engineering systems

    CERN Document Server

    Irschik, Hans; Krommer, Michael

    2014-01-01

    Mechanics and Model-Based Control of Advanced Engineering Systems collects 32 contributions presented at the International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines, which took place in St. Petersburg, Russia in July 2012. The workshop continued a series of international workshops, which started with a Japan-Austria Joint Workshop on Mechanics and Model Based Control of Smart Materials and Structures and a Russia-Austria Joint Workshop on Advanced Dynamics and Model Based Control of Structures and Machines. In the present volume, 10 full-length papers based on presentations from Russia, 9 from Austria, 8 from Japan, 3 from Italy, one from Germany and one from Taiwan are included, which represent the state of the art in the field of mechanics and model based control, with particular emphasis on the application of advanced structures and machines.

  4. Technology Evaluation Workshop Report for Tank Waste Chemical Characterization

    International Nuclear Information System (INIS)

    Eberlein, S.J.

    1994-04-01

    A Tank Waste Chemical Characterization Technology Evaluation Workshop was held August 24--26, 1993. The workshop was intended to identify and evaluate technologies appropriate for the in situ and hot cell characterization of the chemical composition of Hanford waste tank materials. The participants were asked to identify technologies that show applicability to the needs and good prospects for deployment in the hot cell or tanks. They were also asked to identify the tasks required to pursue the development of specific technologies to deployment readiness. This report describes the findings of the workshop. Three focus areas were identified for detailed discussion: (1) elemental analysis, (2) molecular analysis, and (3) gas analysis. The technologies were restricted to those which do not require sample preparation. Attachment 1 contains the final workshop agenda and a complete list of attendees. An information package (Attachment 2) was provided to all participants in advance to provide information about the Hanford tank environment, needs, current characterization practices, potential deployment approaches, and the evaluation procedure. The participants also received a summary of potential technologies (Attachment 3). The workshop opened with a plenary session, describing the background and issues in more detail. Copies of these presentations are contained in Attachments 4, 5 and 6. This session was followed by breakout sessions in each of the three focus areas. The workshop closed with a plenary session where each focus group presented its findings. This report summarizes the findings of each of the focus groups. The evaluation criteria and information about specific technologies are tabulated at the end of each section in the report. The detailed notes from each focus group are contained in Attachments 7, 8 and 9

  5. Proceedings of the 4th KEK mechanical engineering workshop. Research and development on the technology of the X-band accelerator fabrication

    International Nuclear Information System (INIS)

    Ueno, Kenji

    2003-10-01

    The fourth KEK Mechanical Engineering Workshop was held on April 17, 2003. The main subject was ''The Research and Development on the Technology of the X-band Accelerator Fabrication'', which is a part of the collaboration work of Accelerator Laboratory, ACC and Mechanical Engineering Center, MEC based on the joint X-band accelerator research of KEK and SLAC. The main topic of study in FY 2002 was the problem analysis, and seeking its counter-measures about pitting generated over the inner-surface of the accelerator cavities through high field tests. Therefore, to analyze and develop counter-measures for these pittings, manufacturing of several kinds of test accelerators and conducting analytical tests for the surface of cells have been mainly undertaken by ACC and MEC. On the other hand, basic studies of the cutting and bonding processes have shown effective results for the future production process through corroboration work with academic and industrial fields. Related scientists and engineers from various fields participated in this workshop and presented their works. As a keynote speech, Prof. Hitoshi Yamamoto, belonging to Tohoku University, presented ''The physics on linear collider'', and Assistant Prof. Nobukazu Toge, belonging to ACC of KEK, presented ''The Linear Collider Accelerator''. Also, as an invitation speech, former Prof. Nobuteru Hitomi, former Head of MEC, who was the originator of this workshop, and one of the leaders in X-band accelerator fabrication, presented ''The promotion and survey of fabrication technology on X-band accelerator''. These speeches were very instructive, and presented a chance to think about the direction of R and D in our project. Twenty-four papers, ten from KEK, including the keynote speech, seven from universities and seven from industrial companies, were presented and discussed ardently. Among the discussion, there was an opinion that a fast pace to establish mass-production technology is a major requirement for the

  6. Arms control in space: workshop proceedings, Washington, DC, January 30-31, 1984

    International Nuclear Information System (INIS)

    1984-05-01

    In late 1982 and early 1983, the Subcommittee on Arms Control, Oceans, International Operations, and Environment of the Senate Committee on Foreign Relations held hearings on space weapons and arms control. To explore these issues further in a discussion format not easily achieved in hearings, Sen. Larry Pressler, Chairman of the Subcommittee, asked OTA to conduct a workshop focusing on antisatellite (ASAT) weapons as one aspect of space arms control. The workshop held in Washington, DC on January 30 and 31, 1984, provided an opportunity for technical, diplomatic, military, and policy-analysis experts to interact, think out loud, and build each other's ideas. The workshop was organized into six sessions, although issues involving anti-satellite weapons and arms control are not easily compartmentalized into distinct subject areas. Each session was introduced by a 10- or 15-minute informal oral presentation which set the stage for further discussion. This workshop proceedings volume is organized along the same divisions as the sessions, with some rearrangement

  7. Workshops as a Research Methodology

    DEFF Research Database (Denmark)

    Ørngreen, Rikke; Levinsen, Karin Tweddell

    2017-01-01

    , and workshops as a research methodology. Focusing primarily on the latter, this paper presents five studies on upper secondary and higher education teachers’ professional development and on teaching and learning through video conferencing. Through analysis and discussion of these studies’ findings, we argue......This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice...... that workshops provide a platform that can aid researchers in identifying and exploring relevant factors in a given domain by providing means for understanding complex work and knowledge processes that are supported by technology (for example, e-learning). The approach supports identifying factors...

  8. Proceedings of the 15. CRIPE workshop on the hydraulics of ice covered rivers

    Energy Technology Data Exchange (ETDEWEB)

    Hicks, F. [Alberta Univ., Edmonton, AB (Canada). Dept. of Civil and Environmental Engineering] (comp.)

    2009-07-01

    This workshop focused on the hydraulic aspects of river ice phenomena and the effects of ice cover on flow characteristics. Ice processes play a large role in the hydrologic regime of Canadian rivers and are related to the life cycle of aquatic, terrestrial, and avian species. The most serious impacts of river ice occur during ice-jam flooding, affecting the winter operation of hydroelectric power plants and sometimes resulting in the loss of property and human life. The conference addressed these concerns as well as environmental aspects of river ice, and climatic change. The Committee on River Ice Processes and the Environment (CRIPE) identifies high-priority topics for research and development and promotes research programs at Canadian colleges and universities. In addition to a poster session, the workshop included sessions on ice measurement; freeze-up and frazil; ice processes and the environment; ice hydraulics; ice and river regulation; ice jams and breakup forecasting; ice and infrastructure; and remote sensing. The workshop featured 35 presentations, of which 3 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  9. Proceedings of the 15. CRIPE workshop on the hydraulics of ice covered rivers

    International Nuclear Information System (INIS)

    Hicks, F.

    2009-01-01

    This workshop focused on the hydraulic aspects of river ice phenomena and the effects of ice cover on flow characteristics. Ice processes play a large role in the hydrologic regime of Canadian rivers and are related to the life cycle of aquatic, terrestrial, and avian species. The most serious impacts of river ice occur during ice-jam flooding, affecting the winter operation of hydroelectric power plants and sometimes resulting in the loss of property and human life. The conference addressed these concerns as well as environmental aspects of river ice, and climatic change. The Committee on River Ice Processes and the Environment (CRIPE) identifies high-priority topics for research and development and promotes research programs at Canadian colleges and universities. In addition to a poster session, the workshop included sessions on ice measurement; freeze-up and frazil; ice processes and the environment; ice hydraulics; ice and river regulation; ice jams and breakup forecasting; ice and infrastructure; and remote sensing. The workshop featured 35 presentations, of which 3 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  10. International on Workshop Advances in Laboratory Testing & Modelling of Soils and Shales

    CERN Document Server

    Laloui, Lyesse

    2017-01-01

    In this spirit, the ATMSS International Workshop “Advances in Laboratory Testing & Modelling of Soils and Shales” (Villars-sur-Ollon, Switzerland; 18-20 January 2017) has been organized to promote the exchange of ideas, experience and state of the art among major experts active in the field of experimental testing and modelling of soils and shales. The Workshop has been organized under the auspices of the Technical Committees TC-101 “Laboratory Testing”, TC-106 “Unsaturated Soils” and TC-308 “Energy Geotechnics” of the International Society of Soil Mechanics and Geotechnical Engineering. This volume contains the invited keynote and feature lectures, as well as the papers that have been presented at the Workshop. The topics of the lectures and papers cover a wide range of theoretical and experimental research, including unsaturated behaviour of soils and shales, multiphysical testing of geomaterials, hydro–mechanical behaviour of shales and stiff clays, the geomechanical behaviour of the ...

  11. Isolation of bacteria from mechanic workshops' soil environment ...

    African Journals Online (AJOL)

    isolation of Bacillus Stearothermophilus (8.3%) and Cyanobacteria (1.7%) from the sites sampled. The number of viable bacterial growth of B. Stearothermophilus and Cyanobacteria were enumerated and expressed in colony forming units. Agbani had bacteria densities of 5 x 104, 1.25 x 104 and 6.25 x 105 from the three ...

  12. Isolation of bacteria from mechanic workshops' soil environment ...

    African Journals Online (AJOL)

    PRECIOUS

    2009-11-16

    Nov 16, 2009 ... Key words: Used engine oil, contaminated soil, pollution. INTRODUCTION. Environmental pollution with petroleum and petroleum products (complex mixture of hydrocarbons) has been recognized as one of the most serious current problems especially when associated with accidental spills on large-scale.

  13. Workshop meeting

    International Nuclear Information System (INIS)

    Veland, Oeystein

    2004-04-01

    1-2 September 2003 the Halden Project arranged a workshop on 'Innovative Human-System Interfaces and their Evaluation'. This topic is new in the HRP 2003-2005 programme, and it is important to get feedback from member organizations to the work that is being performed in Halden. It is also essential that relevant activities and experiences in this area from the member organizations are shared with the Halden staff and other HRP members. Altogether 25 persons attended the workshop. The workshop had a mixture of presentations and discussions, and was chaired by Dominique Pirus of EDF, France. Day one focused on the HRP/IFE activities on Human-System Interface design, including Function-oriented displays, Ecological Interface Design, Task-oriented displays, as well as work on innovative display solutions for the oil and gas domain. There were also presentations of relevant work in France, Japan and the Czech Republic. The main focus of day two was the verification and validation of human-system interfaces, with presentations of work at HRP on Human-Centered Validation, Criteria-Based System Validation, and Control Room Verification and Validation. The chairman concluded that it was a successful workshop, although one could have had more time for discussions. The Halden Project got valuable feedback and viewpoints on this new topic during the workshop, and will consider all recommendations related to the future work in this area. (Author)

  14. Educating for diversity: an evaluation of a sexuality diversity workshop to address secondary school bullying.

    Science.gov (United States)

    Lucassen, Mathijs F G; Burford, James

    2015-10-01

    To evaluate the potential of a 60-minute sexuality diversity workshop to address bullying in secondary schools. Students completed pre- and post-workshop questionnaires. Descriptive statistics were used to summarise results with pre- to immediate post-workshop changes compared using t-tests. Thematic analysis was used to analyse open-ended questionnaire responses. We had 229 students (mean age 13.7 years) attending 10 workshops participate in the study. Three-quarters of students thought the workshop would reduce bullying in schools, and over 95% of the participants thought that other secondary schools should offer the workshop. There was a significant increase in valuing (p bullying/mocking' of sexuality-diverse students; however, many individual students reported a desire to be supportive of their sexuality-diverse peers. Sexuality-based bullying is commonplace in secondary schools. This form of bullying is associated with depression and suicide attempts. Reducing sexuality-based bullying is very likely to have a positive impact on the mental health of young people. Brief workshops, as a part of a wider suite of interventions, have some potential to create safer school environments. © The Royal Australian and New Zealand College of Psychiatrists 2015.

  15. Conference on Hamiltonian Systems and Celestial Mechanics 2014 & Workshop on Virus Dynamics and Evolution : Extended Abstracts Spring 2014

    CERN Document Server

    Cors, Josep; Llibre, Jaume; Korobeinikov, Andrei

    2015-01-01

    The two parts of the present volume contain extended conference abstracts corresponding to selected talks given by participants at the "Conference on Hamiltonian Systems and Celestial Mechanics 2014" (HAMSYS2014) (15 abstracts) and at the "Workshop on Virus Dynamics and Evolution" (12 abstracts), both held at the Centre de Recerca Matemàtica (CRM) in Barcelona from June 2nd to 6th, 2014, and from June 23th to 27th, 2014, respectively. Most of them are brief articles, containing preliminary presentations of new results not yet published in regular research journals. The articles are the result of a direct collaboration between active researchers in the area after working in a dynamic and productive atmosphere. The first part is about Central Configurations, Periodic Orbits and Hamiltonian Systems with applications to Celestial Mechanics – a very modern and active field of research. The second part is dedicated to mathematical methods applied to viral dynamics and evolution. Mathematical modelling of biologi...

  16. Fifth International Workshop on Sharing and Reusing Architectural Knowledge (SHARK 2010)

    NARCIS (Netherlands)

    Lago, Patricia; Avgeriou, Paris; Kruchten, Philippe

    2010-01-01

    Architectural Knowledge (AK) is defined as the integrated representation of the software architecture of a software-intensive system or family of systems along with architectural decisions and their rationale, external influence and the development environment. The SHARK workshop series focuses on

  17. Results of an adaptive environmental assessment modeling workshop concerning potential impacts of drilling muds and cuttings on the marine environment

    Science.gov (United States)

    Auble, Gregor T.; Andrews, Austin K.; Ellison, Richard A.; Hamilton, David B.; Johnson, Richard A.; Roelle, James E.; Marmorek, David R.

    1983-01-01

    Drilling fluids or "muds" are essential components of modern drilling operations. They provide integrity for the well bore, a medium for removal of formation cuttings, and lubrication and cooling of the drill bit and pipe. The modeling workshop described in this report was conducted September 14-18, 1981 in Gulf Breeze, Florida to consider potential impacts of discharged drilling muds and cuttings on the marine environment. The broad goals of the workshop were synthesis of information on fate and effects, identification of general relationships between drilling fluids and the marine environment, and identification of site-specific variables likely to determine impacts of drilling muds and cuttings in various marine sites. The workshop was structured around construction of a model simulating fate and effects of discharges from a single rig into open water areas of the Gulf of Mexico, and discussion of factors that might produce different fate and effects in enclosed areas such as bays and estuaries. The simulation model was composed of four connected submodels. A Discharge/Fate submodel dealt with the discharge characteristics of the rig and the subsequent fate of discharged material. Three effects submodels then calculated biological responses at distances away from the rig for the water column, soft bottom benthos (assuming the rig was located over a soft bottom environment), and hard bottom benthos (assuming the rig was located over a hard bottom environment). The model focused on direct linkages between the discharge and various organisms rather than on how the marine ecosystem itself is interconnected. Behavior of the simulation model indicated relatively localized effects of drilling muds and cuttings discharged from a single platform into open water areas. Water column fate and effects were dominated by rapid dilution. Effects from deposition of spent mud and cuttings were spatially limited with relatively rapid recovery, especially in soft bottom benthic

  18. Environmental Learning Workshop: Lichen as Biological Indicator of Air Quality and Impact on Secondary Students' Performance

    Science.gov (United States)

    Samsudin, Mohd Wahid; Daik, Rusli; Abas, Azlan; Meerah, T. Subahan Mohd; Halim, Lilia

    2013-01-01

    In this study, the learning of science outside the classroom is believe to be an added value to science learning as well as it offers students to interact with the environment. This study presents data obtained from two days' workshop on Lichen as Biological Indicator for Air Quality. The aim of the workshop is for the students to gain an…

  19. Proceedings of the 3rd international workshop on radiation effects on semiconductor devices for space application

    International Nuclear Information System (INIS)

    1998-10-01

    This publication is the collection of the paper presented at the title workshop. The main purpose of the workshop is to bring the chance for exchange of information between scientists and engineers who work in the field of research and development of semiconductor devices used in strong radiation environment in space. The 27 of the presented papers are indexed individually. (J.P.N.)

  20. Workshop on Friction: Understanding and Addressing Students' Difficulties in Learning Science through a Hermeneutical Perspective

    Science.gov (United States)

    Ha, Sangwoo; Lee, Gyoungho; Kalman, Calvin S.

    2013-01-01

    Hermeneutics is useful in science and science education by emphasizing the process of understanding. The purpose of this study was to construct a workshop based upon hermeneutical principles and to interpret students' learning in the workshop through a hermeneutical perspective. When considering the history of Newtonian mechanics, it could be…

  1. Proceedings of the 1979 workshop on beam current limitations in storage rings, July 16-27, 1979

    International Nuclear Information System (INIS)

    Pellegrini, C.

    1979-01-01

    The Workshop on Beam Current Limitations in Storage Rings was held at Brookhaven National Laboratory from July 16 to 27, 1979. The purpose of this Workshop was to discuss the physical mechanisms limiting the beam current or current density in accelerators or storage rings. Many of these machines are now being built or planned for a variety of applications, such as colliding beam experiments, synchrotron light production, heavy ion beams. This diversity was reflected in the Workshop and in the papers which have been contributed to these Proceedings. The twenty-one papers from the workshop were incorporated individually in the data base

  2. Summary of Workshop on InP: Status and Prospects

    Science.gov (United States)

    Walters, R. J.; Weinberg, I.

    1994-01-01

    The primary objective of most of the programs in InP solar cells is the development of the most radiation hard solar cell technology. In the workshop, it was generally agreed that the goal is a cell which displays high radiation tolerance in a radiation environment equivalent to a 1 MeV electron fluence of about 10(exp 16)/sq cm. Furthermore, it is desired that the radiation response of the cell be essentially flat out to this fluence - i.e. that the power output of the cell not decrease from its beginning of life (BOL) value in this radiation environment. It was also agreed in the workshop that the manufacturability of InP solar cells needs to be improved. In particular, since InP wafers are relatively dense and brittle, alternative substrates need to be developed. Research on hetero-epitaxial InP cells grown on Si, Ge, and GaAs substrates is currently underway. The ultimate goal is to develop hetero-epitaxial InP solar cells using a cheap, strong, and lightweight substrate.

  3. STREAM2016: Streaming Requirements, Experience, Applications and Middleware Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Fox, Geoffrey [Indiana Univ., Bloomington, IN (United States); Jha, Shantenu [Rutgers Univ., New Brunswick, NJ (United States); Ramakrishnan, Lavanya [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-10-01

    The Department of Energy (DOE) Office of Science (SC) facilities including accelerators, light sources and neutron sources and sensors that study, the environment, and the atmosphere, are producing streaming data that needs to be analyzed for next-generation scientific discoveries. There has been an explosion of new research and technologies for stream analytics arising from the academic and private sectors. However, there has been no corresponding effort in either documenting the critical research opportunities or building a community that can create and foster productive collaborations. The two-part workshop series, STREAM: Streaming Requirements, Experience, Applications and Middleware Workshop (STREAM2015 and STREAM2016), were conducted to bring the community together and identify gaps and future efforts needed by both NSF and DOE. This report describes the discussions, outcomes and conclusions from STREAM2016: Streaming Requirements, Experience, Applications and Middleware Workshop, the second of these workshops held on March 22-23, 2016 in Tysons, VA. STREAM2016 focused on the Department of Energy (DOE) applications, computational and experimental facilities, as well software systems. Thus, the role of “streaming and steering” as a critical mode of connecting the experimental and computing facilities was pervasive through the workshop. Given the overlap in interests and challenges with industry, the workshop had significant presence from several innovative companies and major contributors. The requirements that drive the proposed research directions, identified in this report, show an important opportunity for building competitive research and development program around streaming data. These findings and recommendations are consistent with vision outlined in NRC Frontiers of Data and National Strategic Computing Initiative (NCSI) [1, 2]. The discussions from the workshop are captured as topic areas covered in this report's sections. The report

  4. 2007 Lunar Regolith Simulant Workshop Overview

    Science.gov (United States)

    McLemore, Carole A.; Fikes, John C.; Howell, Joe T.

    2007-01-01

    The National Aeronautics and Space Administration (NASA) vision has as a cornerstone, the establishment of an Outpost on the Moon. This Lunar Outpost will eventually provide the necessary planning, technology development, and training for a manned mission to Mars in the future. As part of the overall activity, NASA is conducting Earth-based research and advancing technologies to a Technology Readiness Level (TRL) 6 maturity under the Exploration Technology Development Program that will be incorporated into the Constellation Project as well as other projects. All aspects of the Lunar environment, including the Lunar regolith and its properties, are important in understanding the long-term impacts to hardware, scientific instruments, and humans prior to returning to the Moon and living on the Moon. With the goal of reducing risk to humans and hardware and increasing mission success on the Lunar surface, it is vital that terrestrial investigations including both development and verification testing have access to Lunar-like environments. The Marshall Space Flight Center (MSFC) is supporting this endeavor by developing, characterizing, and producing Lunar simulants in addition to analyzing existing simulants for appropriate applications. A Lunar Regolith Simulant Workshop was conducted by MSFC in Huntsville, Alabama, in October 2007. The purpose of the Workshop was to bring together simulant developers, simulant users, and program and project managers from ETDP and Constellation with the goals of understanding users' simulant needs and their applications. A status of current simulant developments such as the JSC-1A (Mare Type Simulant) and the NASA/U.S. Geological Survey Lunar Highlands-Type Pilot Simulant (NU-LHT-1 M) was provided. The method for evaluating simulants, performed via Figures of Merit (FoMs) algorithms, was presented and a demonstration was provided. The four FoM properties currently being assessed are: size, shape, density, and composition. Some of the

  5. 15th Cluster workshop

    CERN Document Server

    Laakso, Harri; Escoubet, C. Philippe; The Cluster Active Archive : Studying the Earth’s Space Plasma Environment

    2010-01-01

    Since the year 2000 the ESA Cluster mission has been investigating the small-scale structures and processes of the Earth's plasma environment, such as those involved in the interaction between the solar wind and the magnetospheric plasma, in global magnetotail dynamics, in cross-tail currents, and in the formation and dynamics of the neutral line and of plasmoids. This book contains presentations made at the 15th Cluster workshop held in March 2008. It also presents several articles about the Cluster Active Archive and its datasets, a few overview papers on the Cluster mission, and articles reporting on scientific findings on the solar wind, the magnetosheath, the magnetopause and the magnetotail.

  6. European Workshop on High Order Nonlinear Numerical Schemes for Evolutionary PDEs

    CERN Document Server

    Beaugendre, Héloïse; Congedo, Pietro; Dobrzynski, Cécile; Perrier, Vincent; Ricchiuto, Mario

    2014-01-01

    This book collects papers presented during the European Workshop on High Order Nonlinear Numerical Methods for Evolutionary PDEs (HONOM 2013) that was held at INRIA Bordeaux Sud-Ouest, Talence, France in March, 2013. The central topic is high order methods for compressible fluid dynamics. In the workshop, and in this proceedings, greater emphasis is placed on the numerical than the theoretical aspects of this scientific field. The range of topics is broad, extending through algorithm design, accuracy, large scale computing, complex geometries, discontinuous Galerkin, finite element methods, Lagrangian hydrodynamics, finite difference methods and applications and uncertainty quantification. These techniques find practical applications in such fields as fluid mechanics, magnetohydrodynamics, nonlinear solid mechanics, and others for which genuinely nonlinear methods are needed.

  7. 2014 Penn State Bioinorganic Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Golbeck, John [Pennsylvania State Univ., State College, PA (United States)

    2015-10-01

    The 3rd Penn State Bioinorganic Workshop took place in early June 2014 and was combined with the 3rd Penn State Frontiers in Metallobiochemistry Symposium. The workshop was even larger than the 2nd Penn State Bioinorganic Workshop we offered in 2012. It had even more participants (162 rather than 123 in 2012). Like the 2012 workshop, the 2014 workshop had three parts. The first part consisted of 16 90-minute lectures presented by faculty experts on the topic of their expertise (see below). Based on the suggestions from the 2012 workshop, we have recorded all 16 lectures professionally and make them available to the entire bioinorganic community via online streaming. In addition, hard copies of the recordings are available as backup.

  8. INDICO Workshop

    CERN Multimedia

    CERN. Geneva; Fabbrichesi, Marco

    2004-01-01

    The INtegrated DIgital COnferencing EU project has finished building a complete software solution to facilitate the MANAGEMENT OF CONFERENCES, workshops, schools or simple meetings from their announcement to their archival. Everybody involved in the organization of events is welcome to join this workshop, in order to understand the scope of the project and to see demonstrations of the various features.

  9. Preface to COAST 2016 innovators' workshop on personalized and precision orthodontic therapy.

    Science.gov (United States)

    Nickel, J C; Covell, D A; Frazier-Bowers, S A; Kapila, S; Huja, S S; Iwasaki, L R

    2017-06-01

    A second focused workshop explored how to transfer novel findings into clinical orthodontic practice. Participants met in West Palm Beach (Florida, USA), on 9-11 September 2016 for the Consortium for Orthodontic Advances in Science and Technology 2016 Innovators' Workshop (COAST). Approximately 65 registered attendees considered and discussed information from 27 to 34 speakers, 8 to 15 poster presenters and four lunch-hour focus group leaders. The innovators' workshops were organized according to five themed sessions. The aims of the discussion sessions were to identify the following: i) the strength and impact of the evidenced-based discoveries, ii) required steps to enable further development and iii) required steps to translate these new discoveries into orthodontic practice. The role of gene-environment interactions that underlie complex craniofacial traits was the focus of several sessions. It was agreed that diverse approaches are called for, such as (i) large-scale collaborative efforts for future genetic studies of complex traits; (ii) deep genome sequencing to address the issues of isolated mutations; (iii) quantifying epigenetic-environmental variables in diverse areas myofascial pain, alveolar remodelling and mandibular growth. Common needs identified from the themed sessions were multiscale/multispecies modelling and experimentation using controlled and quantified mechanics and translation of the findings in bone biology between species. Panel discussions led to the consensus that a consortium approach to establish standards for intra-oral scanning and 3D imaging should be initiated. Current and emerging technologies still require supported research to translate new findings from the laboratory to orthodontic practice. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  10. Mechanical properties of recycled concrete in marine environment.

    Science.gov (United States)

    Wang, Jianxiu; Huang, Tianrong; Liu, Xiaotian; Wu, Pengcheng; Guo, Zhiying

    2013-01-01

    Experimental work was carried out to develop information about mechanical properties of recycled concrete (RC) in marine environment. By using the seawater and dry-wet circulation to simulate the marine environment, specimens of RC were tested with different replacement percentages of 0%, 30%, and 60% after immersing in seawater for 4, 8, 12, and 16 months, respectively. Based on the analysis of the stress-strain curves (SSCs) and compressive strength, it is revealed that RC' peak value and elastic modulus decreased with the increase of replacement percentage and corroding time in marine environment. And the failure of recycled concrete was speeded up with more obvious cracks and larger angles of 65° to 85° in the surface when compared with normal concrete. Finally, the grey model (GM) with equal time intervals was constructed to investigate the law of compressive strength of recycled concrete in marine environment, and it is found that the GM is accurate and feasible for the prediction of RC compressive strength in marine environment.

  11. An AHP-based evaluation method for teacher training workshop on information and communication technology.

    Science.gov (United States)

    Lucas, Rochelle Irene; Promentilla, Michael Angelo; Ubando, Aristotle; Tan, Raymond Girard; Aviso, Kathleen; Yu, Krista Danielle

    2017-08-01

    The emergence of information and communication technology (ICT) has created opportunities for enhancing the learning process at different educational levels. However, its potential benefits can only be fully realized if teachers are properly trained to utilize such tools. The rapid evolution of ICT also necessitates rigorous assessment of training programs by participants. Thus, this study proposes an evaluation framework based on the Analytic Hierarchy Process (AHP) to systematically evaluate such workshops designed for teachers. The evaluation model is decomposed hierarchically into four main criteria namely: (1) workshop design, (2) quality of content of the workshop, (3) quality of delivery of the content of the workshop, and the (4) relevance of the workshop. These criteria are further disaggregated into 24 sub-indicators to measure the effectiveness of the workshop as perceived by the participants based on their own expectations. This framework is applied to a case study of ICT workshops done in the Philippines. In this case, relevance of the workshop is found to be the most important main criterion identified by the participants, particularly on the new ICT knowledge that promotes teachers' professional growth and development. The workshop evaluation index (WEI) is also proposed as a metric to support decision-making by providing a mechanism for benchmarking performance, tracking improvement over time, and developing strategies for the design and improvement of training programs or workshops on ICT for teachers. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Proceedings of the workshop on research needs in toxicology

    International Nuclear Information System (INIS)

    Myers, D.K.; Osborne, R.V.

    1988-05-01

    A workshop on the theme 'Research Needs in Toxicology' was held at the Chalk River laboratories in November 1987. A program in toxicological protection aims to develop a fundamental and unified understanding of the behaviour of toxic agents in the environment and workplace, and of the consequent effects on human health. This understanding is necessary so that risks from such agents can be assessed quantitatively and realistically. These assessments, together with consideration of economic and social factors, provide a sound basis for decisions made to safeguard health. Where are the gaps in our current knowledge and ability to make such assessments? What research is needed? In these workshop proceedings, a number of eminent toxicologists from Canada and the U.S.A. discuss these questions

  13. Canadian Site Visit and Workshop - Summary and International Perspective

    International Nuclear Information System (INIS)

    2003-01-01

    The third workshop of the OECD/NEA Forum on Stakeholder Confidence (FSC) was hosted by Natural Resources Canada (NRCan) for three days in Ottawa, following a one-day visit of the Port Hope area which included meetings with community representatives and project managers and a tour of low-level waste management facilities. The Ottawa workshop examined social concerns regarding radioactive waste management: what the concerns are, how they are identified, and how they can be addressed. Sixty-nine people attended the workshop from fourteen countries and forty-five organizations. They ranged from representatives of municipal governments, non-governmental organizations and private citizens to government policy makers, regulators, implementers, consultants and university, social and media researchers. The participants included stakeholders in large-scale industrial projects (both nuclear and nonnuclear) and stakeholders directly affected by nuclear projects. About one half came from FSC member organisations; the remainders were Canadian stakeholders. The workshop was structured with five half-day sessions. The opening half-day described Canadian policy and the regulatory environment for radioactive waste management and the two central case studies for the workshop: the Port Hope Area Initiative and the Nuclear Fuel Waste Act. Three sessions addressed the topics 'What are the social concerns?', 'How to address social concerns?' and 'Development opportunities for communities'. Each of the sessions began with plenary presentations by five stakeholders. These 'stakeholder voices' were followed by roundtable discussions. The participants were divided into eight tables, each including a mix of Canadian and other attendees. Each table discussed a set of pre-defined questions under the direction of a facilitator/Rapporteur. The discussions from each round table were reported in a follow-up plenary. The final half-day of the workshop was

  14. The QED Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Pieper, G.W.

    1994-07-01

    On May 18--20, 1994, Argonne National Laboratory hosted the QED Workshop. The workshop was supported by special funding from the Office of Naval Research. The purpose of the workshop was to assemble of a group of researchers to consider whether it is desirable and feasible to build a proof-checked encyclopedia of mathematics, with an associated facility for theorem proving and proof checking. Among the projects represented were Coq, Eves, HOL, ILF, Imps, MathPert, Mizar, NQTHM, NuPrl, OTTER, Proof Pad, Qu-Prolog, and RRL. Although the content of the QED project is highly technical rigorously proof-checked mathematics of all sorts the discussions at the workshop were rarely technical. No prepared talks or papers were given. Instead, the discussions focused primarily on such political, sociological, practical, and aesthetic questions, such as Why do it? Who are the customers? How can one get mathematicians interested? What sort of interfaces are desirable? The most important conclusion of the workshop was that QED is an idea worthy pursuing, a statement with which virtually all the participants agreed. In this document, the authors capture some of the discussions and outline suggestions for the start of a QED scientific community.

  15. Environmentally assisted cracking mechanisms in repository environments

    International Nuclear Information System (INIS)

    Mills, W.J.

    1987-02-01

    This paper assesses how environmentally assisted cracking (EAC) mechanisms in candidate container materials can be identified to enhance the accuracy of long-term projections of performance in the repository. In low and intermediate strength steels, the role of the two principal mechanisms, slip dissolution/film rupture (SD/FR) and hydrogen embrittlement (HE), is a very complex and controversial issue. No unanimity exists concerning the operative cracking mechanisms, and there is no unique or rigorous approach that would be persuasive in selecting an appropriate model. Both of the proposed mechanisms have common rate controlling processes such as surface adsorption rate, passivation rate, and oxidation rupture rate, which makes it difficult to identify the operative mechanism. Development of a quantitative model for predicting environmental effects for low-carbon steels in repository environments would provide a theoretical basis for assuring the long-term structural integrity of waste-package containment. To date, only one quantitative model has been developed. The agreement between predicted and observed behavior suggests that SD/FR processes control the environmental acceleration in crack growth rates for this class of materials. Deviations from predicted behavior due to HE effects should be uncovered experimentally. 59 refs., 4 figs., 4 tabs

  16. Stakeholder successes in global environmental management. Report of workshop

    Energy Technology Data Exchange (ETDEWEB)

    Welp, M. (ed.)

    2001-04-01

    The workshop had two main objectives: (a) to identify stakeholders who have perspectives and knowledge needed to develop good solutions to global change problems and to create long lasting, stable relationships with them and (b) to learn about the participants' perceptions of global change problems, future expectations and their views on global change research. For this purpose the workshop was organised around 'success stories', which provided a stimulus for discussion. Presentations were given by people from organisations that have a pioneering role, for example in emission trading, in linking paper consumption with forest management by forest certification and in creating sustainable investment mechanisms. (orig.)

  17. Stakeholder successes in global environmental management. Report of workshop

    Energy Technology Data Exchange (ETDEWEB)

    Welp, M [ed.

    2001-04-01

    The workshop had two main objectives: (a) to identify stakeholders who have perspectives and knowledge needed to develop good solutions to global change problems and to create long lasting, stable relationships with them and (b) to learn about the participants' perceptions of global change problems, future expectations and their views on global change research. For this purpose the workshop was organised around 'success stories', which provided a stimulus for discussion. Presentations were given by people from organisations that have a pioneering role, for example in emission trading, in linking paper consumption with forest management by forest certification and in creating sustainable investment mechanisms. (orig.)

  18. Air-Based Remediation Workshop - Section 8 Air-Based Remediation Technology Selection Logic

    Science.gov (United States)

    Pursuant to the EPA-AIT Implementing Arrangement 7 for Technical Environmental Collaboration, Activity 11 "Remediation of Contaminated Sites," the USEPA Office of International Affairs Organized a Forced Air Remediation Workshop in Taipei to deliver expert training to the Environ...

  19. [Health education at the health workshops of Cahors: challenges].

    Science.gov (United States)

    Théry, Céline

    2013-01-01

    There have been significant developments in health education over recent years. Focusing on France, the purpose of this paper is to examine the role of health education in reducing social inequalities based on the example of the Atelier santé ville de Cahors (Cahors Health Workshop). The paper addresses the following questions: What are the results and outcomes of the workshop? What kind of health education issues are at stake in the territorial approach to policy-making in an urban context? We examined the methods underlying the health education measures taken in the Cahors Health Workshop, which involve project-based approaches and the promotion of community health. Health education aimed at improving health is central to issues such as listening and speaking, the development of autonomy and the responsibilization of urban actors. Based on a rigorous methodology and the underlying values, health education in the Cahors Health Workshop places local residents, elected representatives and health professionals at the heart of the health care process (from the diagnostic process to the assessment process) and contributes to the reduction of social inequalities in health while facilitating access to information and health care. The goal of health education is to encourage individuals to be responsible for their own health in order to empower them to make informed choices adapted to the demands of their environment.

  20. Psychosocial mechanisms linking the social environment to mental health in African Americans

    Science.gov (United States)

    Resource-poor social environments predict poor health, but the mechanisms and processes linking the social environment to psychological health and well-being remain unclear. This study explored psychosocial mediators of the association between the social environment and mental health in African Amer...

  1. Seventeenth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Cook, J.W. (Stanford Geothermal Program)

    1992-01-31

    PREFACE The Seventeenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 29-31, 1992. There were one hundred sixteen registered participants which equaled the attendance last year. Participants were from seven foreign countries: Italy, Japan, United Kingdom, France, Belgium, Mexico and New Zealand. Performance of many geothermal fields outside the United States was described in the papers. The Workshop Banquet Speaker was Dr. Raffaele Cataldi. Dr. Cataldi gave a talk on the highlights of his geothermal career. The Stanford Geothermal Program Reservoir Engineering Award for Excellence in Development of Geothermal Energy was awarded to Dr. Cataldi. Dr. Frank Miller presented the award at the banquet. Thirty-eight papers were presented at the Workshop with two papers submitted for publication only. Dr. Roland Horne opened the meeting and the key note speaker was J.E. ''Ted'' Mock who discussed the DOE Geothermal R. & D. Program. The talk focused on aiding long-term, cost effective private resource development. Technical papers were organized in twelve sessions concerning: geochemistry, hot dry rock, injection, geysers, modeling, and reservoir mechanics. Session chairmen were major contributors to the program and we thank: Sabodh Garg., Jim Lovekin, Jim Combs, Ben Barker, Marcel Lippmann, Glenn Horton, Steve Enedy, and John Counsil. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Ted Sumida, and Terri A. Ramey who also produces the Proceedings Volumes for publication. We owe a great deal of thanks to our students who operate audiovisual equipment and to Francois Groff who coordinated the meeting arrangements for the Workshop. Henry J. Ramey, Jr. Roland N. Horne Frank G. Miller Paul Kruger William E. Brigham Jean W. Cook -vii

  2. [Clinical and communication simulation workshop for fellows in gastroenterology: the trainees' perspective].

    Science.gov (United States)

    Lang, Alon; Melzer, Ehud; Bar-Meir, Simon; Eliakim, Rami; Ziv, Amitai

    2006-11-01

    The continuing development in computer-based medical simulators provides an ideal platform for simulator-assisted training programs for medical trainees. Computer-based endoscopic simulators provide a virtual reality environment for training endoscopic procedures. This study illustrates the use of a comprehensive training model combining the use of endoscopic simulators with simulated (actor) patients (SP). To evaluate the effectiveness of a comprehensive simulation workshop from the trainee perspective. Four case studies were developed with emphasis on communication skills. Three workshops with 10 fellows in each were conducted. During each workshop the trainees spent half of the time in SP case studies and the remaining half working with computerized endoscopic simulators with continuous guidance by an expert endoscopist. Questionnaires were completed by the fellows at the end of the workshop. Seventy percent of the fellows felt that the endoscopic simulator was close or very close to reality for gastroscopy and 63% for colonoscopy. Eighty eight percent thought the close guidance was important for the learning process with the simulator. Eighty percent felt that the case studies were an important learning experience for risk management. Further evaluation of multi-modality simulation workshops in gastroenterologist training is needed to identify how best to incorporate this form of instruction into training for gastroenterologists.

  3. Workshop V: Cultural Perception and Bias/Science Practice and Ethics

    Science.gov (United States)

    Chuan, Kwek Leong; Lin, Jauyn Grace; Pierron-Bohnes, Veronique; Dawson, Silvina Ponce

    2015-12-01

    Despite the objectivity of science, the local work environment affects the daily activities of scientists. Differences in cultural perception can affect female scientists in the workplace directly. The pressure currently exerted on researchers, on the other hand, is altering how science is practiced and seems to affect women and men differently. In this paper we summarize the discussions that took place on this topic in Workshop V of the 5th IUPAP International Conference on Women in Physics. We present some of the results of the 2010 Global Survey of Physicists analyzed by region and data from France and Taiwan. We also include the recommendations that were formulated at the end of the workshop.

  4. A visualization environment for supercomputing-based applications in computational mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Pavlakos, C.J.; Schoof, L.A.; Mareda, J.F.

    1993-06-01

    In this paper, we characterize a visualization environment that has been designed and prototyped for a large community of scientists and engineers, with an emphasis in superconducting-based computational mechanics. The proposed environment makes use of a visualization server concept to provide effective, interactive visualization to the user`s desktop. Benefits of using the visualization server approach are discussed. Some thoughts regarding desirable features for visualization server hardware architectures are also addressed. A brief discussion of the software environment is included. The paper concludes by summarizing certain observations which we have made regarding the implementation of such visualization environments.

  5. Report and supporting documentation of the workshop on the effects of environmental variation on the survival of larval pelagic fishes. IOC workshop report No. 28

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    This report is the result of a workshop held from 21 April to 5 May 1980 at the Instituto del Mar del Peru (IMARPE) under contract from the Food and Agriculture Organization of the United Nations. The topic of the workshop was the effects of environmental variation on the survival of eggs and larvae of pelagic fishes. The emphasis of this workshop was limited to exploration of the conditions, modes and mechanisms which allow larval fish to survive and grow to adulthood in order to be utilized by mankind. In the long run, the results of this and subsequent efforts will depend upon which of two things is basically true: (1) important events in the early life history of fish may be usefully described in terms of a few measurable parameters or (2) any attempt to describe (model) the mechanisms of complex biological-environmental-behavioural interactions of an organism in an uncontrolled ecological niche is futile. The major discussions during the workshop centered on the descriptions of existing larval survival models which were developed from energetic principles based on laboratory and field studies; the conceptual and practical studies of environmental properties of oceanic current systems which support major commercial resources; the available physical oceanographic models for describing and analytically evaluation stabilizing and mixing processes; and the development of requirements for a generalized model of the interaction of the physical and biological processes which might lead to qualitative forecasts of recruitment, given that this might be an important objective in some fisheries.

  6. Environment assisted degradation mechanisms in aluminum-lithium alloys

    Science.gov (United States)

    Gangloff, Richard P.; Stoner, Glenn E.; Swanson, Robert E.

    1988-01-01

    Section 1 of this report records the progress achieved on NASA-LaRC Grant NAG-1-745 (Environment Assisted Degradation Mechanisms in Al-Li Alloys), and is based on research conducted during the period April 1 to November 30, 1987. A discussion of work proposed for the project's second year is included. Section 2 provides an overview of the need for research on the mechanisms of environmental-mechanical degradation of advanced aerospace alloys based on aluminum and lithium. This research is to provide NASA with the basis necessary to permit metallurgical optimization of alloy performance and engineering design with respect to damage tolerance, long term durability and reliability. Section 3 reports on damage localization mechanisms in aqueous chloride corrosion fatigue of aluminum-lithium alloys. Section 4 reports on progress made on measurements and mechanisms of localized aqueous corrosion in aluminum-lithium alloys. Section 5 provides a detailed technical proposal for research on environmental degradation of Al-Li alloys, and the effect of hydrogen in this.

  7. 1st Workshop on Eye Tracking and Visualization

    CERN Document Server

    Chuang, Lewis; Fisher, Brian; Schmidt, Albrecht; Weiskopf, Daniel

    2017-01-01

    This book discusses research, methods, and recent developments in the interdisciplinary field that spans research in visualization, eye tracking, human-computer interaction, and psychology. It presents extended versions of papers from the First Workshop on Eye Tracking and Visualization (ETVIS), which was organized as a workshop of the IEEE VIS Conference 2015. Topics include visualization and visual analytics of eye-tracking data, metrics and cognitive models, eye-tracking experiments in the context of visualization interfaces, and eye tracking in 3D and immersive environments. The extended ETVIS papers are complemented by a chapter offering an overview of visualization approaches for analyzing eye-tracking data and a chapter that discusses electrooculography (EOG) as an alternative of acquiring information about eye movements. Covering scientific visualization, information visualization, and visual analytics, this book is a valuable resource for eye-tracking researchers within the visualization community.

  8. Alternate fusion fuels workshop

    International Nuclear Information System (INIS)

    1981-06-01

    The workshop was organized to focus on a specific confinement scheme: the tokamak. The workshop was divided into two parts: systems and physics. The topics discussed in the systems session were narrowly focused on systems and engineering considerations in the tokamak geometry. The workshop participants reviewed the status of system studies, trade-offs between d-t and d-d based reactors and engineering problems associated with the design of a high-temperature, high-field reactor utilizing advanced fuels. In the physics session issues were discussed dealing with high-beta stability, synchrotron losses and transport in alternate fuel systems. The agenda for the workshop is attached

  9. The Third ATLAS ROD Workshop

    CERN Multimedia

    Poggioli, L.

    A new-style Workshop After two successful ATLAS ROD Workshops dedicated to the ROD hardware and held at the Geneva University in 1998 and in 2000, a new style Workshop took place at LAPP in Annecy on November 14-15, 2002. This time the Workshop was fully dedicated to the ROD-TDAQ integration and software in view of the near future integration activities of the final RODs for the detector assembly and commissioning. More precisely, the aim of this workshop was to get from the sub-detectors the parameters needed for T-DAQ, as well as status and plans from ROD builders. On the other hand, what was decided and assumed had to be stated (like EB decisions and URDs), and also support plans. The Workshop gathered about 70 participants from all ATLAS sub-detectors and the T-DAQ community. The quite dense agenda allowed nevertheless for many lively discussions, and for a dinner in the old town of Annecy. The Sessions The Workshop was organized in five main sessions: Assumptions and recommendations Sub-de...

  10. 77 FR 8324 - Applications for the Environment: Real-Time Information Synthesis (AERIS) User Needs Workshop...

    Science.gov (United States)

    2012-02-14

    ... (AERIS) User Needs Workshop; Notice of Public Meeting AGENCY: Research and Innovative Technology... transformative capabilities of wireless technology to make surface transportation safer, smarter, and greener... significant environmental benefits. The AERIS Transformative Concepts include: (1) Eco-signal operations, (2...

  11. Climate change mitigation in Asia and financing Mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    Shukla, P.R.; Deo, P. [eds.

    1998-12-01

    The three primary objectives of the conference, which was organized by the UNEP Collaborating Centre on Energy and Environment (UCCEE) in conjunction with the Environment Department of the World Bank, at Goa in India from May 4 to 6, 1998, were: 1) to share the GHG mitigation experiences from Asian developing countries; 2) to disseminate the standard methodological approach for mitigation analysis developed by UNEP and its applications in different countries; and 3) assess the role and efficacy of financial mechanisms and to, specifically, seek feedback on the Prototype Carbon Fund proposed by the World Bank. Follwing these objectives, the workshop presentations and discussions were structured in three parts. In the first part, participants from eleven Asian developing countries made presentations that were followed by discussions. The second part included the presentations by the experts from UCCEE, UNFCCC and other invited experts who presented the mitigation methodology and the issues and experiences relating to various co-operative implementation mechanisms. The third part included the presentations by the World Bank representatives on the Prototype Carbon Fund and the discussions on financial mechanisms. (EG)

  12. Emergency response workers workshop

    International Nuclear Information System (INIS)

    Agapeev, S.A.; Glukhikh, E.N.; Tyurin, R.L.

    2012-01-01

    A training workshop entitled Current issues and potential improvements in Rosatom Corporation emergency prevention and response system was held in May-June, 2012. The workshop combined theoretical training with full-scale practical exercise that demonstrated the existing innovative capabilities for radiation reconnaissance, diving equipment and robotics, aircraft, emergency response and rescue hardware and machinery. This paper describes the activities carried out during the workshop [ru

  13. Sixth Computational Biomechanics for Medicine Workshop

    CERN Document Server

    Nielsen, Poul MF; Miller, Karol; Computational Biomechanics for Medicine : Deformation and Flow

    2012-01-01

    One of the greatest challenges for mechanical engineers is to extend the success of computational mechanics to fields outside traditional engineering, in particular to biology, biomedical sciences, and medicine. This book is an opportunity for computational biomechanics specialists to present and exchange opinions on the opportunities of applying their techniques to computer-integrated medicine. Computational Biomechanics for Medicine: Deformation and Flow collects the papers from the Sixth Computational Biomechanics for Medicine Workshop held in Toronto in conjunction with the Medical Image Computing and Computer Assisted Intervention conference. The topics covered include: medical image analysis, image-guided surgery, surgical simulation, surgical intervention planning, disease prognosis and diagnostics, injury mechanism analysis, implant and prostheses design, and medical robotics.

  14. 2015 Inverter Workshop | Photovoltaic Research | NREL

    Science.gov (United States)

    Inverter Workshop 2015 Inverter Workshop Wednesday, February 25, 2015 Chair: Jack Flicker In about inverters. This workshop represented a follow-on to the inverter workshops that Sandia National conversations between module and inverter experts. Agenda For a detailed schedule of the day's events, access

  15. First International Workshop on Grid Simulator Testing of Wind Turbine Drivetrains: Workshop Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Gevorgian, V.; Link, H.; McDade, M.; Mander, A.; Fox, J. C.; Rigas, N.

    2013-11-01

    This report summarizes the proceedings of the First International Workshop on Grid Simulator Testing of Wind Turbine Drivetrains, held from June 13 to 14, 2013, at the National Renewable Energy Laboratory's National Wind Technology Center, located south of Boulder, Colorado. The workshop was sponsored by the U.S. Department of Energy and cohosted by the National Renewable Energy Laboratory and Clemson University under ongoing collaboration via a cooperative research and development agreement. The purpose of the workshop was to provide a forum to discuss the research, testing needs, and state-of-the-art apparatuses involved in grid compliance testing of utility-scale wind turbine generators. This includes both dynamometer testing of wind turbine drivetrains ('ground testing') and field testing grid-connected wind turbines. Four sessions followed by discussions in which all attendees of the workshop were encouraged to participate comprised the workshop.

  16. PREFACE: 5th International Workshop DICE2010: Space-Time-Matter - Current Issues in Quantum Mechanics and Beyond

    Science.gov (United States)

    Diósi, Lajos; Elze, Hans-Thomas; Fronzoni, Leone; Halliwell, Jonathan; Prati, Enrico; Vitiello, Giuseppe; Yearsley, James

    2011-07-01

    These proceedings present the Invited Lectures and Contributed Papers of the Fifth International Workshop on Decoherence, Information, Complexity and Entropy - DICE 2010, held at Castello Pasquini, Castiglioncello (Tuscany), 13-17 September 2010. These proceedings are intended to document the stimulating exchange of ideas at this conference for both the interested public and the wider scientific community, as well as for the participants. The number of participants attending this series of meetings has been growing steadily, which reflects its increasing attraction. Our intention to bring together leading researchers, advanced students, and renowned scholars from various areas in order to stimulate new ideas and their exchange across the borders of specialization seems to bear fruit. In this way, the series of meetings has continued successfully from the beginning with DICE 2002 [1], followed by DICE 2004 [2], DICE 2006 [3], and DICE 2008 [4], uniting more than 100 participants representing almost 30 countries worldwide. It has been a great honour and inspiration to have Professor Luc Montagnier (Nobel Prize for Medicine 2008) from the World Foundation for AIDS Research and Prevention with us, who presented the lecture DNA waves and water (included in this volume). The discussions took place under the wider theme Space-Time-Matter - current issues in quantum mechanics and beyond in the very pleasant and inspiring atmosphere of Castello Pasquini, which - with its beautiful surroundings, overlooking the Tuscany coast - hosted the conference very successfully for the second time. The five-day program was grouped according to the following topics: Gravity and Quantum Mechanics Quantum Coherent Processes in Biology / Many-Body Systems From Quantum Foundations to Particle Physics The Deep Structure of Spacetime Quantum - Relativity - Cosmology A Public Roundtable Discussion formed an integral part of the program under the theme Sull' Onda Della Coerenza" - le nuove

  17. Informal Workshop on Burial and Mobility Modeling of Munitions in the Underwater Environment

    Science.gov (United States)

    2014-12-01

    Engineers (USACE) funding (e.g., HEC - RAS – http://www.hec.usace.army.mil/software/ hec - ras /). 4.3. Near Field Versus Far Field Near field...Naval Research PI – Principal Investigator PMRF – Pacific Missile Range Facility RAS – Risk Assessment System RI – Remedial Investigation SERDP...concept for the prototype Risk Assessment System ( RAS ) links output from a probabilistic SERDP REPORT – INFORMAL WORKSHOP ON BURIAL AND MOBILITY

  18. Virtual Workshop Experiences for Faculty: Lessons Learned from On the Cutting Edge

    Science.gov (United States)

    McDaris, J. R.; Kirk, K. B.; Mogk, D. W.; Bruckner, M. Z.

    2010-12-01

    access. In terms of best practices, the most important lesson learned is the need to make the experience as “real” as possible so that participants stay engaged and feel connected to the workshop experience. This can be accomplished by making the presentations interactive, continued leader participation in threaded discussions and break out groups, and providing multiple channels for contribution and participation. Despite some initial hesitation in jumping into a virtual environment, participants gained experience and became more comfortable with collaboration via online technologies. Participants had access to their own scientific and instructional materials at their home offices, and as a result could design and complete new teaching resources more effectively during the workshop. Peer review of new instructional resources was also completed during the workshop, and virtual networks were established to support continuing work. Online workshops can be used to effectively minimize costs, extend participation, build and sustain community networks, and develop thematic collections of instructional resources and activities. Based on the success of the 2010 workshops, more online workshops are planned for the coming years.

  19. Tandem mirror theory workshop

    International Nuclear Information System (INIS)

    1981-05-01

    The workshop was divided into three sections which were constituted according to subject matter: RF Heating, MHD Equilibrium and Stability, and Transport and Microstability. An overview from Livermore's point of view was given at the beginning of each session. Each session was assigned a secretary to take notes. These notes have been used in preparing this report on the workshop. The report includes the activities, conclusions, and recommendations of the workshop

  20. International cooperation workshop. Regional workshop for CTBTO international cooperation: Africa

    International Nuclear Information System (INIS)

    1999-08-01

    Pursuant to the 1999 programme of work, and following the International Cooperation Workshop held in Vienna, Austria, in 1998, the Provisional Technical Secretariat (PTS) of the Preparatory Commission for the CTBTO (Prep Com) held a regional Workshop for CTBTO International Cooperation in Cairo. The purpose of the workshop was to identify how and by what means the Africa region can promote international cooperation in CTBT verification related technologies, and how the region can benefit from and contribute to Prep Com activity. PTS staff briefed the 40 participants from 22 African States who attended the Workshop on general aspects, including costs, of the establishment and operation of the CTBT verification system, including its four monitoring technologies. Participants were informed on opportunities for local institutions in the establishment of monitoring stations and on possible support for national and regional data centres. National experts presented their research and development activities and reviewed existing experiences on bi/multi-lateral cooperation. The main points of the discussion focused on the need to engage governments to advance signature/ratification, and further training opportunities for African states

  1. 75 FR 58411 - Center for Veterinary Medicine eSubmitter Workshop; Public Workshop; Request for Comments

    Science.gov (United States)

    2010-09-24

    ...] Center for Veterinary Medicine eSubmitter Workshop; Public Workshop; Request for Comments AGENCY: Food... Drug Administration (FDA) is announcing a public workshop entitled: ``Center for Veterinary Medicine... be emailed to all registrants. Contact Person: Charles Andres, Center for Veterinary Medicine (HFV...

  2. Flipping the Online Classroom with Web 2.0: The Asynchronous Workshop

    Science.gov (United States)

    Cummings, Lance

    2016-01-01

    This article examines how Web 2.0 technologies can be used to "flip" the online classroom by creating asynchronous workshops in social environments where immediacy and social presence can be maximized. Using experience teaching several communication and writing classes in Google Apps (Google+, Google Hangouts, Google Drive, etc.), I…

  3. Network workshop

    DEFF Research Database (Denmark)

    Bruun, Jesper; Evans, Robert Harry

    2014-01-01

    This paper describes the background for, realisation of and author reflections on a network workshop held at ESERA2013. As a new research area in science education, networks offer a unique opportunity to visualise and find patterns and relationships in complicated social or academic network data....... These include student relations and interactions and epistemic and linguistic networks of words, concepts and actions. Network methodology has already found use in science education research. However, while networks hold the potential for new insights, they have not yet found wide use in the science education...... research community. With this workshop, participants were offered a way into network science based on authentic educational research data. The workshop was constructed as an inquiry lesson with emphasis on user autonomy. Learning activities had participants choose to work with one of two cases of networks...

  4. Strategic Leaders Adapting to the Future Environment: Department of State Senior Leader Workshop. Volume 02-03

    National Research Council Canada - National Science Library

    Wimbish, Bill

    2003-01-01

    The purpose of the workshop was to provide participants an opportunity to first review and examine current strategic leadership theories and concepts and how the Army develops and trains its officer...

  5. Workshop report: US-China workshop on smart structures and smart systems

    Science.gov (United States)

    Tomizuka, Masayoshi

    2006-03-01

    A Joint U.S.-China workshop on the topic of Integrated Sensing Systems, Mechatronics and Smart Structures Technologies was held in Jinan, China in October 2005 to evaluate the current status of research and education in the topic areas in the United States and China, to identify critical and strategic research and educational issues of mutual interest, and to identify joint research projects and potential research teams for collaborative research activities. The workshop included a series of presentations by leading researchers and educators from the United States and China and group discussions on the workshop objectives.

  6. Performance Tests of a Mechanical Pump in Sodium Environment

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Chungho; Kim, Jong-Man; Ko, Yung Joo; Kim, Byeongyeon; Cho, Youngil; Jung, Min-Hwan; Gam, Da-Young; Lee, Yong Bum; Jeong, Ji-Young; Kim, Jong-Bum [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    Water is often selected as a surrogate test fluid because it is not only cheap, easily available and easy to handle but also its important hydraulic properties (density and kinematic viscosity) are very similar to that of the sodium. Nevertheless, to ensure the performance, safety, and operability of major components before its installation in the SFR, a series of demonstration experiments of some components in sodium environment should be positively necessary. So, SFR NSSS System Design Division of Korea Atomic Energy Research Institute (KAERI) built various sodium experimental facilities, especially STELLA-1 in 2012. STELLA-1 (Sodium inTegral Effect test Loop for safety simuLation and Assessment) is a large-scale separated effect test facility for demonstrating the thermal-hydraulic performances of major components such as a Sodium-to-Sodium heat exchanger (DHX), Sodium-to-Air heat exchanger (AHX) of the decay heat removal system, and mechanical sodium pump of the primary heat transport system (PHTS). The mechanical pump in-sodium performance test was successfully performed with good reproducibility of the experiment and data to compare hydraulic characteristic of a mechanical pump in-water was collected. In effect of temperature variation on the pump pressure head, reduction of pump pressure head at 250℃ by 0.57% of that of 300℃ maybe the result of an increase in sodium viscosity by 13.6% according to operating temperature decrease by 50℃. Also, we confirmed that the more flywheel weight, the longer halving time and the more initial flow rate when the pump seized, the shorter halving time. The results of the mechanical pump performance test data in sodium environment will be used to compare with that of the in water environment after the evaluation of measurement uncertainty for tests.

  7. Innovative confinement concepts workshop

    International Nuclear Information System (INIS)

    Kirkpatrick, R.C.

    1998-01-01

    The Innovative Confinement Concepts Workshop occurred in California during the week preceding the Second Symposium on Current Trends in International Fusion Research. An informal report was made to the Second Symposium. A summary of the Workshop concluded that some very promising ideas were presented, that innovative concept development is a central element of the restructured US DOE. Fusion Energy Sciences program, and that the Workshop should promote real scientific progress in fusion

  8. IPCC workshop on impacts of ocean acidification on marine biology and ecosystems. Workshop report

    Energy Technology Data Exchange (ETDEWEB)

    Field, C.B.; Barros, V.; Stocker, T.F.; Dahe, Q.; Mach, K.J.; Plattner, G.-K.; Mastrandrea, M.D.; Tignor, M.; Ebi, K.L.

    2011-09-15

    Understanding the effects of increasing atmospheric CO{sub 2} concentrations on ocean chemistry, commonly termed ocean acidification, as well as associated impacts on marine biology and ecosystems, is an important component of scientific knowledge about global change. The Fifth Assessment Report (AR5) of the Intergovernmental Panel on Climate Change (IPCC) will include comprehensive coverage of ocean acidification and its impacts, including potential feedbacks to the climate system. To support ongoing AR5 assessment efforts, Working Group II and Working Group I (WGII and WGI) of the IPCC held a joint Workshop on Impacts of Ocean Acidification on Marine Biology and Ecosystems in Okinawa, Japan, from 17 to 19 January 2011. The workshop convened experts from the scientific community, including WGII and WGI AR5 authors and review editors, to synthesise scientific understanding of changes in ocean chemistry due to increased CO{sub 2} and of impacts of this changing chemistry on marine organisms, ecosystems, and ecosystem services. This workshop report summarises the scientific content and perspectives presented and discussed during the workshop. It provides syntheses of these perspectives for the workshop's core topics: (i) the changing chemistry of the oceans, (ii) impacts of ocean acidification for individual organisms, and (iii) scaling up responses from individual organisms to ecosystems. It also presents summaries of workshop discussions of key cross-cutting themes, ranging from detection and attribution of ocean acidification and its impacts to understanding ocean acidification in the context of other stressors on marine systems. Additionally, the workshop report includes extended abstracts for keynote and poster presentations at the workshop. (Author)

  9. Improving the workplace environment

    CSIR Research Space (South Africa)

    Gledhill, Irvy MA

    2014-08-01

    Full Text Available Research has shown that companies with more diversity and a better workplace perform better. So what makes a good workplace in physics, where women and men can work to their full potential? In the Improving the Workplace Environment workshop...

  10. Proceedings of the National Training Workshop on Neonatal Hypothyroidism Screening

    International Nuclear Information System (INIS)

    Osifo, B.O.A.

    2002-05-01

    The National Training Workshop on Neonatal Hypothyroidism screening project was conceived in 2000 and was held at the University of Ibadan from May 5 - May 8, 2002. The National Neonatal Hypothyroidism Screening project is a Technical Cooperation Project between the International Atomic Energy Agency and the Federal Government of Nigeria. The Workshop was organized to raise the awareness to the Health related professionals and Policy makers on the importance of screening for Neonatal Hypothyroidism in our country. Neonatal Hypothyroidism is a result of lack of the thyroid hormones in the neonates and this is mostly due to iodine deficiency in our environment - both in the soil and water. This lack of thyroid hormones in the neonates if not treated leads to a serious disease known as Cretinism. Cretinism affects both the mental and physical developments of these children. This Training Workshop focussed on the importance of the Screening programme for all urgent treatment. The Workshop also showed clearly that lack of care and treatment of such neonates in Nigeria so as to identify the neonates that need urgent treatment. The Workshop also showed clearly that lack of care and treatment of such neonates would have a profound detrimental effect on the social and economical development of Nigeria. The spread of Iodine Deficiency in our country is nation wide. It is not based on political zoning system. Rather, Cretinism is a problem in our country and the participants are convinced that it can be prevented by the support of the Federal Government in the form of the provision of Transportation for the three centres in the country - Ibadan, Jos and Port-Harcourt, for collection of blood specimens and regular Counterpart Funding for this IAEA project. The organizers of this Workshop will like to express their sincere thanks to International Atomic Energy Agency who not only supplies all the equipment and reagents for this national project but also funded this National

  11. Workshop on Subcritical Neutron Production

    International Nuclear Information System (INIS)

    Walter Sadowski; Roald Sagdeev

    2006-01-01

    Executive Summary of the Workshop on Subcritical Neutron Production A workshop on Subcritical Neutron Production was sponsored by the East-West Center of the University of Maryland on October 11-13, 2004. The subject of the workshop was the application of subcritical neutrons to transmutation of actinides. The workshop was attended by members of the fission, accelerator and fusion communities. Papers on the state of development of neutron production by accelerators, fusion devices, and fission reactors were presented. Discussions were held on the potential of these technologies to solve the problems of spent nuclear waste storage and nuclear non-proliferation presented by current and future nuclear power reactors. A list of participants including their affiliation and their E-Mail addresses is attached. The workshop concluded that the technologies, presently available or under development, hold out the exciting possibility of improving the environmental quality and long term energy resources of nuclear power while strengthening proliferation resistance. The workshop participants agreed on the following statements. The workshop considered a number of technologies to deal with spent nuclear fuels and current actinide inventories. The conclusion was reached that substantial increase in nuclear power production will require that the issue of spent nuclear fuel be resolved. The Workshop concluded that 14 MeV fusion neutrons can be used to destroy nuclear reactor by-products, some of which would otherwise have to be stored for geologic periods of time. The production of 14 MeV neutrons is based on existing fusion technologies at different research institutions in several countries around the world. At the present time this technology is used to produce 14 MeV neutrons in JET. More development work will be required, however, to bring fusion technology to the level where it can be used for actinide burning on an industrial scale. The workshop concluded that the potential

  12. Promoting interdisciplinarity through an intensive entrepreneurship education post-graduate workshop

    DEFF Research Database (Denmark)

    McDonald, Sharyn; Gertsen, Frank; Rosenstand, Claus Andreas Foss

    2018-01-01

    the pedagogical challenge of interdisciplinary learning. Design/methodology/approach – This paper adopts a case-based approach. The case subject is Aalborg University that founded an intensive entrepreneurial education workshop that incorporates a problem-based learning (PBL) approach. This paper evaluates...... the program design, development, and replication plus compares the motives and subsequent experiences between workshop participants in Denmark and Australia. Findings – The findings of this case study validate the centrality of entrepreneurship education as a discipline which has the capacity to unite staff...... an engaging program that unlocks untapped creative potential among students from diverse cultures and multiple disciplines. Overall, this research contributes toward the body of knowledge examining student engagement and the delivery of PBL activities within an interdisciplinary learning environment....

  13. RESULTS FROM THE (1) DATA COLLECTION WORKSHOP, (2) MODELING WORKSHOP AND (3) DRILLING AND CORING METHODS WORKSHOP AS PART OF THE JOINT INDUSTRY PARTICIPATION (JIP) PROJECT TO CHARACTERIZE NATURAL GAS HYDRATES IN THE DEEPWATER GULF OF MEXICO

    Energy Technology Data Exchange (ETDEWEB)

    Stephen A. Holditch; Emrys Jones

    2002-09-01

    In 2000, Chevron began a project to learn how to characterize the natural gas hydrate deposits in the deepwater portions of the Gulf of Mexico. A Joint Industry Participation (JIP) group was formed in 2001, and a project partially funded by the U.S. Department of Energy (DOE) began in October 2001. The primary objective of this project is to develop technology and data to assist in the characterization of naturally occurring gas hydrates in the deepwater Gulf of Mexico. These naturally occurring gas hydrates can cause problems relating to drilling and production of oil and gas, as well as building and operating pipelines. Other objectives of this project are to better understand how natural gas hydrates can affect seafloor stability, to gather data that can be used to study climate change, and to determine how the results of this project can be used to assess if and how gas hydrates act as a trapping mechanism for shallow oil or gas reservoirs. As part of the project, three workshops were held. The first was a data collection workshop, held in Houston during March 14-15, 2002. The purpose of this workshop was to find out what data exist on gas hydrates and to begin making that data available to the JIP. The second and third workshop, on Geoscience and Reservoir Modeling, and Drilling and Coring Methods, respectively, were held simultaneously in Houston during May 9-10, 2002. The Modeling Workshop was conducted to find out what data the various engineers, scientists and geoscientists want the JIP to collect in both the field and the laboratory. The Drilling and Coring workshop was to begin making plans on how we can collect the data required by the project's principal investigators.

  14. IPHE Infrastructure Workshop Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    None

    2010-02-01

    This proceedings contains information from the IPHE Infrastructure Workshop, a two-day interactive workshop held on February 25-26, 2010, to explore the market implementation needs for hydrogen fueling station development.

  15. Reactor simulator development. Workshop material

    International Nuclear Information System (INIS)

    2001-01-01

    The International Atomic Energy Agency (IAEA) has established a programme in nuclear reactor simulation computer programs to assist its Member States in education and training. The objective is to provide, for a variety of advanced reactor types, insight and practice in reactor operational characteristics and their response to perturbations and accident situations. To achieve this, the IAEA arranges for the supply or development of simulation programs and training material, sponsors training courses and workshops, and distributes documentation and computer programs. This publication consists of course material for workshops on development of such reactor simulators. Participants in the workshops are provided with instruction and practice in the development of reactor simulation computer codes using a model development system that assembles integrated codes from a selection of pre-programmed and tested sub-components. This provides insight and understanding into the construction and assumptions of the codes that model the design and operational characteristics of various power reactor systems. The main objective is to demonstrate simple nuclear reactor dynamics with hands-on simulation experience. Using one of the modular development systems, CASSIM tm , a simple point kinetic reactor model is developed, followed by a model that simulates the Xenon/Iodine concentration on changes in reactor power. Lastly, an absorber and adjuster control rod, and a liquid zone model are developed to control reactivity. The built model is used to demonstrate reactor behavior in sub-critical, critical and supercritical states, and to observe the impact of malfunctions of various reactivity control mechanisms on reactor dynamics. Using a PHWR simulator, participants practice typical procedures for a reactor startup and approach to criticality. This workshop material consists of an introduction to systems used for developing reactor simulators, an overview of the dynamic simulation

  16. Applications of ion beam analysis workshop. Workshop handbook

    International Nuclear Information System (INIS)

    1995-01-01

    A workshop on applications of ion beam analysis was held at ANSTO, immediate prior to the IBMM-95 Conference in Canberra. It aims was to review developments and current status on use of ion beams for analysis, emphasizing the following aspects: fundamental ion beam research and secondary effects of ion beams; material sciences, geological, life sciences, environmental and industrial applications; computing codes for use in accelerator research; high energy heavy ion scattering and recoil; recent technological development using ion beams. The handbook contains the workshop's program, 29 abstracts and a list of participants

  17. EDITORIAL: The Fourth International Workshop on Microfactories (IWMF'04)

    Science.gov (United States)

    Chu, Jiaru; Maeda, Ryutaro

    2005-10-01

    This special section of Journal of Micromechanics and Microengineering is devoted to the fourth International Workshop on Microfactories. After the first three successful Workshops, which took place in Tsukuba, Japan in 1998, Fribourg, Switzerland in 2000 and Minneapolis, USA in 2002, the fourth (IWMF'04) was held in Shanghai, China on 15-17 October 2004. The concept of the `microfactory' and miniaturized production systems was first proposed by the Mechanical Engineering Laboratory in Japan who demonstrated the feasibility of downsizing energy-saving, distributed and eventually environmentally conscious manufacturing systems. There is incredible potential in reducing the physical scale of numerous processes related to the manufacture of many forms of future dense `mechatronic' products and in the manipulation of microscopic and nanoscopic objects and materials for the benefit of mankind. Small systems capable of these operations can be referred to as `microfactories'. A worldwide effort is currently underway to bring such microfactories to fruition. MEMS, MST and micromachines are regarded as synonyms, but they do not necessarily have the same meaning. In particular, differences can be found in their technological approaches. Roughly speaking, research and development in the USA is based primarily on surface or bulk silicon micromachining processes, and the ideal realization of MEMS seems to be the monolithic device. The European approach also focuses on integration between electronics and mechanics but, especially in connection with the development of `µTAS', it also demands the integration of non-mechanical components into the system. In Japan the approaches for MST are said to be rather less focused. Besides the above-mentioned `classical' microsystem technologies, down-scaling of conventional manufacturing methods, or non-silicon based device processing within this field, completely new technological methods are also considered as `microsystem technologies

  18. Not Your Typical Simulation Workshop: Using LEGOs to Train Medical Students on the Practice of Effective Communication.

    Science.gov (United States)

    Papanagnou, Dimitrios; Lee, Hyunjoo; Rodriguez, Carlos; Zhang, Xiao Chi C; Rudner, Joshua

    2018-01-21

    As students in the health professions transition from the classroom into the clinical environment, they will be expected to effectively communicate with their team members and their patients. Effective communication skills are essential to their ability to effectively contribute to their clinical team and the patient care they deliver. The authors propose an interactive workshop that can support students' deliberate practice of communication skills. The authors designed a simulation workshop that affords students the opportunity to practice their communication and peer-to-peer coaching skills. Using LEGOs, a one-hour workshop was conducted with medical students. Students were divided into groups of two. Each student took on a different role: teacher or builder. Teachers were tasked with instructing builders on how to construct a pre-made LEGO structure, not allowing builders to look at the structure. A group debriefing followed to evaluate the activity and explore the themes that emerged. Twenty first-year medical students and 25 fourth-year medical students participated in this activity. Most groups were successful in reproducing the pre-made structure. Groups that pre-briefed before building were most successful. Unsuccessful groups did not define orientation or direction in mutually understood terms, resulting in the creation of an incorrect mirror image of the structure - a common phenomenon seen during the teaching of procedures in the clinical learning environment. The workshop was well received. Students made requests to have similar sessions throughout their training to better support the development of effective communication skills. The workshop can easily be applied to other specialties to assist with procedural skills instruction or in workshops focusing on effective communication.

  19. Not Your Typical Simulation Workshop: Using LEGOs to Train Medical Students on the Practice of Effective Communication

    Science.gov (United States)

    Lee, Hyunjoo; Rodriguez, Carlos; Zhang, Xiao Chi C; Rudner, Joshua

    2018-01-01

    As students in the health professions transition from the classroom into the clinical environment, they will be expected to effectively communicate with their team members and their patients. Effective communication skills are essential to their ability to effectively contribute to their clinical team and the patient care they deliver. The authors propose an interactive workshop that can support students’ deliberate practice of communication skills. The authors designed a simulation workshop that affords students the opportunity to practice their communication and peer-to-peer coaching skills. Using LEGOs, a one-hour workshop was conducted with medical students. Students were divided into groups of two. Each student took on a different role: teacher or builder. Teachers were tasked with instructing builders on how to construct a pre-made LEGO structure, not allowing builders to look at the structure. A group debriefing followed to evaluate the activity and explore the themes that emerged. Twenty first-year medical students and 25 fourth-year medical students participated in this activity. Most groups were successful in reproducing the pre-made structure. Groups that pre-briefed before building were most successful. Unsuccessful groups did not define orientation or direction in mutually understood terms, resulting in the creation of an incorrect mirror image of the structure – a common phenomenon seen during the teaching of procedures in the clinical learning environment. The workshop was well received. Students made requests to have similar sessions throughout their training to better support the development of effective communication skills. The workshop can easily be applied to other specialties to assist with procedural skills instruction or in workshops focusing on effective communication. PMID:29568715

  20. Summer 1994 Computational Science Workshop. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    This report documents the work performed by the University of New Mexico Principal Investigators and Research Assistants while hosting the highly successful Summer 1994 Computational Sciences Workshop in Albuquerque on August 6--11, 1994. Included in this report is a final budget for the workshop, along with a summary of the participants` evaluation of the workshop. The workshop proceeding have been delivered under separate cover. In order to assist in the organization of future workshops, we have also included in this report detailed documentation of the pre- and post-workshop activities associated with this contract. Specifically, we have included a section that documents the advertising performed, along with the manner in which applications were handled. A complete list of the workshop participants in this section. Sample letters that were generated while dealing with various commercial entities and departments at the University are also included in a section dealing with workshop logistics. Finally, we have included a section in this report that deals with suggestions for future workshops.

  1. Proceedings from the technical workshop on near-field performance assessment for high-level waste

    International Nuclear Information System (INIS)

    Sellin, P.; Apted, M.; Gago, J.

    1991-12-01

    This report contains the proceedings of 'Technical workshop of near-filed performance assessment for high-level waste' held in Madrid October 15-17, 1990. It includes the invited presentations and summaries of the scientific discussions. The workshop covered several topics: * post-emplacement environment, * benchmarking of computer codes, * glass release, * spent-fuel release, * radionuclide solubility, * near-field transport processes, * coupled processes in the near-field, * integrated assessments, * sensitivity analyses and validation. There was an invited presentation on each topic followed by an extensive discussion. One of the points highlighted in the closing discussion of the workshop was the need for international cooperation in the field of near-field performance assessment. The general opinion was that this was best achieved in smaller groups discussing specific questions. (au) Separate abstracts were prepared for 9 papers in this volume

  2. Vulcano Workshop 2016

    CERN Document Server

    Mannocchi, G.; Morselli, A.; Trinchero, G.

    2016-01-01

    We announce the XVI Vulcano Workshop, which will be held from May 22nd to May 28th, 2016 in the Vulcano Island (Sicily, Italy). As in the past editions, the workshop will aim to gather people from High Energy Astrophysics and Particle Physics to discuss the most recent highlights in these fields. The workshop will cover the following topics: Astrophysics/Cosmology, Astrophysics/Gravity, Dark Matter, Particle Physics, Cosmic Rays, Gamma/Neutrino Astronomy, Neutrinos and Future Prospects. The scientific program will include several 30-minute review talks, to introduce the current problems, and 20-minute talks, giving new experimental and theoretical results. The participation is by invitation and limited to 80 people.

  3. Emerging and Future Computing Paradigms and Their Impact on the Research, Training, and Design Environments of the Aerospace Workforce

    Science.gov (United States)

    Noor, Ahmed K. (Compiler)

    2003-01-01

    The document contains the proceedings of the training workshop on Emerging and Future Computing Paradigms and their impact on the Research, Training and Design Environments of the Aerospace Workforce. The workshop was held at NASA Langley Research Center, Hampton, Virginia, March 18 and 19, 2003. The workshop was jointly sponsored by Old Dominion University and NASA. Workshop attendees came from NASA, other government agencies, industry and universities. The objectives of the workshop were to a) provide broad overviews of the diverse activities related to new computing paradigms, including grid computing, pervasive computing, high-productivity computing, and the IBM-led autonomic computing; and b) identify future directions for research that have high potential for future aerospace workforce environments. The format of the workshop included twenty-one, half-hour overview-type presentations and three exhibits by vendors.

  4. CEBAF/SURA 1985 Summer Workshop

    International Nuclear Information System (INIS)

    Crannel, H.

    1985-12-01

    The 1985 Summer Workshop began a new phase of planning for the experimental program at CEBAF. One goal of the Workshop was to define and describe options for equipping the CEBAF and stations with experimental equipment. Starting with an initial list of options which grew out of discussions during the Winter of 1984 and the Spring of 1985, the five working groups met during the Workshop and developed their final reports, included in these proceedings. The program of the Workshop consisted of invited talks on both theoretical and experimental topics, and working group meetings. The five working groups, include: Magnetic Spectrometers; Large Acceptance Detectors and Low Intensity Beams; Internal Targets; Positrons; Theory. These proceedings begin with an overview of CEBAF, and a report on progress made by the Magnetic Spectrometer and Internal Target Working Groups prior to the Workshop. The next part contains the invited talks, presented in the order which they were given during the week. The final reports of the five working groups follow this, and the proceedings conclude with papers contributed to the Workshop

  5. N Reactor Lessons Learned workshop

    International Nuclear Information System (INIS)

    Heaberlin, S.W.

    1993-07-01

    This report describes a workshop designed to introduce participants to a process, or model, for adapting LWR Safety Standards and Analysis Methods for use on rector designs significantly different than LWR. The focus of the workshop is on the ''Lessons Learned'' from the multi-year experience in the operation of N Reactor and the efforts to adapt the safety standards developed for commercial light water reactors to a graphite moderated, water cooled, channel type reactor. It must be recognized that the objective of the workshop is to introduce the participants to the operation of a non-LWR in a LWR regulatory world. The total scope of this topic would take weeks to provide a through overview. The objective of this workshop is to provide an introduction and hopefully establish a means to develop a longer term dialogue for technical exchange. This report provides outline of the workshop, a proposed schedule of the workshop, and a description of the tasks will be required to achieve successful completion of the project

  6. 2011 Marine Hydrokinetic Device Modeling Workshop: Final Report; March 1, 2011

    Energy Technology Data Exchange (ETDEWEB)

    Li, Y.; Reed, M.; Smith, B.

    2011-10-01

    This report summarizes the NREL Marine and Hydrokinetic Device Modeling Workshop. The objectives for the modeling workshop were to: (1) Review the designs of existing MHK device prototypes and discuss design and optimization procedures; (2) Assess the utility and limitations of modeling techniques and methods presently used for modeling MHK devices; (3) Assess the utility and limitations of modeling methods used in other areas, such as naval architecture and ocean engineering (e.g., oil & gas industry); and (4) Identify the necessary steps to link modeling with other important components that analyze MHK devices (e.g., tank testing, PTO design, mechanical design).

  7. The fourth international energy agency international workshop on beryllium technology for fusion

    International Nuclear Information System (INIS)

    Scaffidi-Argentina, F.; Longhurst, G.R.

    2000-01-01

    The main objective of the workshop was to support the advancement of the international development of fusion power through communication and dissemination of information on progress made in beryllium technology. This has been accomplished through presentation of original research on issues of current interest to the fusion beryllium community. The workshop was divided into ten technical sessions that addressed the following general topics: production and characterization, health and safety, forming and joining, chemical compatibility, thermal-mechanical properties, pebble bed behavior, high-heat-flux performance, irradiation effects, plasma-tritium interaction, and molten beryllium-bearing salts

  8. The fourth international energy agency international workshop on beryllium technology for fusion

    Energy Technology Data Exchange (ETDEWEB)

    Scaffidi-Argentina, F.; Longhurst, G.R.

    2000-05-01

    The main objective of the workshop was to support the advancement of the international development of fusion power through communication and dissemination of information on progress made in beryllium technology. This has been accomplished through presentation of original research on issues of current interest to the fusion beryllium community. The workshop was divided into ten technical sessions that addressed the following general topics: production and characterization, health and safety, forming and joining, chemical compatibility, thermal-mechanical properties, pebble bed behavior, high-heat-flux performance, irradiation effects, plasma-tritium interaction, and molten beryllium-bearing salts.

  9. EDITORIAL: 23rd International Laser Physics Workshop (LPHYS'14)

    Science.gov (United States)

    2015-03-01

    Dear Readers, The 23rd annual International Laser Physics Workshop, LPHYS'14, took place in the City of Sofia, Bulgaria. 361 participants from 35 countries attended the conference. It was hosted by the Institute of Electronics at the Bulgarian Academy of Sciences. This year's Workshop was dedicated to paying tribute to two major events: • 50th anniversary of 1964 Nobel Prize in physics, • 145th anniversary of the establishment of the Bulgarian Academy of Sciences. LPHYS'14 has been taken under the High Patronage of Rosen Plevneliev, President of the Republic of Bulgaria. The LPHYS'14 Steering Committee and the Advisory & Program Committee would like to extend their sincere gratitude to Professor Sanka Gateva (Co-Chair) and Professor Ekaterina Borisova (Head of the Local Organizing Committee) and to their team for the outstanding job performed in organizing, arranging, managing and putting in order the conference. Their combined efforts lead to a successful result. In this volume of Journal of Physics: Conference Series you will find selected proceedings of the Workshop in Sofia. Please make a note that the 24th annual International Laser Physics Workshop (LPHYS'15) will take place from August 21 to August 25, 2015 in the city of Shanghai, China hosted by Shanghai Institute of Optics and Fine Mechanics at the Chinese Academy of Sciences. With kind regards, Steering and Advisory & Program committees LPHYS'14

  10. Request for Travel Funds for Systems Radiation Biology Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Barcellos-Hoff, Mary Helen [NYU School of Medicine

    2014-03-22

    The 3rd International Systems Radiation Biology Workshop brought together the major European, US and Japanese research programs on radiation risk as well as selected experts representing systems biological approaches to discuss how the new methodologies could be best exploited for low dose research. A significant part of the workshop was devoted to discussions organised as breakout group sessions. To facilitate discussions number of participants was limited to 60 persons. To achieve the goals of this symposium in this international conference, support from DOE is vital. Hence, this proposal requested support in the amount of $15,000 to cover the travel expenses of international experts and radiation biology scientists from the United States. This supporting mechanism was clearly identified to the selected US participants as a conference support award from the DOE (See attached PDF). The workshop was an outstanding opportunity to strengthen interactions between leading experts in the emerging areas of radiation sciences, and will also provide opportunities for younger scientists to meet with experts and discuss their results. This workshop was designed to endorse active engagement in international collaboration. A major objective of this conference was to effectively communicate research results, in order to ensure that current thinking reflects sound science of radiation biology. Further, this international event addressed the use and success of scientific initiatives in radiation biology for policymakers, standard-setters, and the general public.

  11. International exchange project for the engineer exchange project (in coal mine technology area) in fiscal 1998. Overseas workshop; 1998 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Kaigai workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The international exchange project for the engineer exchange project (in coal mine technology area) in fiscal 1998, the 'Overseas workshop' has performed exchange in technologies with Australian coal mine engineers. The project refers to the Australian technological levels and needs in coal production, safety control and environment, as well as transfer of the Japanese coal mine technologies. This report summarizes the result of a survey on the engineer exchange project in the coal mine technology area and the possibility of joint researches. The 'overseas workshop' was held in November 1998 for two days in Brisbane City in QLD Province as the 'Japan-Australia coal technology workshop'. The 'Japan-Australia coal technology workshop' gave lectures in five sessions (the basic lecture, Japan-Australia high-speed excavation project, coal mine gas control project, exploration and resources, and development and experience of Japan). It also discussed two themes (mine safety management and rules, and greenhouse effect gases and coal mining). Two coal mines were visited thereafter to deepen the exchange with the Australian coal mine engineers. (NEDO)

  12. Abnormal Condition Monitoring of Workpieces Based on RFID for Wisdom Manufacturing Workshops

    Directory of Open Access Journals (Sweden)

    Cunji Zhang

    2015-12-01

    Full Text Available Radio Frequency Identification (RFID technology has been widely used in many fields. However, previous studies have mainly focused on product life cycle tracking, and there are few studies on real-time status monitoring of workpieces in manufacturing workshops. In this paper, a wisdom manufacturing model is introduced, a sensing-aware environment for a wisdom manufacturing workshop is constructed, and RFID event models are defined. A synthetic data cleaning method is applied to clean the raw RFID data. The Complex Event Processing (CEP technology is adopted to monitor abnormal conditions of workpieces in real time. The RFID data cleaning method and data mining technology are examined by simulation and physical experiments. The results show that the synthetic data cleaning method preprocesses data well. The CEP based on the Rifidi® Edge Server technology completed abnormal condition monitoring of workpieces in real time. This paper reveals the importance of RFID spatial and temporal data analysis in real-time status monitoring of workpieces in wisdom manufacturing workshops.

  13. Abnormal Condition Monitoring of Workpieces Based on RFID for Wisdom Manufacturing Workshops

    Science.gov (United States)

    Zhang, Cunji; Yao, Xifan; Zhang, Jianming

    2015-01-01

    Radio Frequency Identification (RFID) technology has been widely used in many fields. However, previous studies have mainly focused on product life cycle tracking, and there are few studies on real-time status monitoring of workpieces in manufacturing workshops. In this paper, a wisdom manufacturing model is introduced, a sensing-aware environment for a wisdom manufacturing workshop is constructed, and RFID event models are defined. A synthetic data cleaning method is applied to clean the raw RFID data. The Complex Event Processing (CEP) technology is adopted to monitor abnormal conditions of workpieces in real time. The RFID data cleaning method and data mining technology are examined by simulation and physical experiments. The results show that the synthetic data cleaning method preprocesses data well. The CEP based on the Rifidi® Edge Server technology completed abnormal condition monitoring of workpieces in real time. This paper reveals the importance of RFID spatial and temporal data analysis in real-time status monitoring of workpieces in wisdom manufacturing workshops. PMID:26633418

  14. Nuclear physics workshop

    International Nuclear Information System (INIS)

    1988-01-01

    This Workshop in Nuclear Physics related to the TANDAR, took place in Buenos Aires in April from 23 to 26, 1987, with attendance of foreign scientists. There were presented four seminars and a lot of studies which deal with the following fields: Nuclear Physics at medium energies, Nuclear Structure, Nuclear Reactions, Nuclear Matter, Instrumentation and Methodology for Nuclear Spectroscopy, Classical Physics, Quantum Mechanics and Field Theory. It must be emphasized that the Electrostatic Accelerator TANDAR allows to work with heavy ions of high energy, that opens a new field of work in PIXE (particle induced X-ray emission). This powerful analytic technique makes it possiblethe analysis of nearly all the elements of the periodic table with the same accuracy. (M.E.L.) [es

  15. Formation mechanisms of trichloromethyl-containing compounds in the terrestrial environment

    DEFF Research Database (Denmark)

    Breider, Florian; Albers, Christian Nyrop

    2015-01-01

    Natural trichloromethyl compounds present in the terrestrial environment are important contributors to chlorine in the lower atmosphere and may be also a cause for concern when high concentrations are detected in soils and groundwater. During the last decade our knowledge of the mechanisms involved...... of trichloromethyl compounds and then to compare these mechanisms with the much more comprehensive literature on the reactions occurring during chemical chlorination of organic material. It turns out that the reaction mechanisms during chemical chlorination are likely to be similar to those occurring naturally...

  16. Coherent structures in tokamak plasmas workshop: Proceedings

    International Nuclear Information System (INIS)

    Koniges, A.E.; Craddock, G.G.

    1992-08-01

    Coherent structures have the potential to impact a variety of theoretical and experimental aspects of tokamak plasma confinement. This includes the basic processes controlling plasma transport, propagation and efficiency of external mechanisms such as wave heating and the accuracy of plasma diagnostics. While the role of coherent structures in fluid dynamics is better understood, this is a new topic for consideration by plasma physicists. This informal workshop arose out of the need to identify the magnitude of structures in tokamaks and in doing so, to bring together for the first time the surprisingly large number of plasma researchers currently involved in work relating to coherent structures. The primary purpose of the workshop, in addition to the dissemination of information, was to develop formal and informal collaborations, set the stage for future formation of a coherent structures working group or focus area under the heading of the Tokamak Transport Task Force, and to evaluate the need for future workshops on coherent structures. The workshop was concentrated in four basic areas with a keynote talk in each area as well as 10 additional presentations. The issues of discussion in each of these areas was as follows: Theory - Develop a definition of structures and coherent as it applies to plasmas. Experiment - Review current experiments looking for structures in tokamaks, discuss experimental procedures for finding structures, discuss new experiments and techniques. Fluids - Determine how best to utilize the resource of information available from the fluids community both on the theoretical and experimental issues pertaining to coherent structures in plasmas. Computation - Discuss computational aspects of studying coherent structures in plasmas as they relate to both experimental detection and theoretical modeling

  17. Division of Mechanical Construction - Overview

    International Nuclear Information System (INIS)

    Halik, J.

    2000-01-01

    workshop posses CNC milling machine which can be used for machining of work-pieces up to 500 kg. The machine allows the following tool movements in particular axes: X -1000 mm, Y - 500 mm, Z - 500 mm; it is controlled by HEIDENHAIN 407 Control System, and ensures the accuracy and reproducibility of machining of 0.01 mm in each of the axis. In 1999 the Department of Mechanical Construction designed, manufactured and assembled an equipment for the following foreign laboratories: - Deutsches Elektronen Synchrotron, Hamburg, FRG; - Institute of Physics, Polish Academy of Science, Warszawa, Poland; - Jagiellonian University, Krakow, Poland; - Massachusetts Institute of Technology, Cambridge, Massachusetts, USA; - University of Rochester. Rochester, NY, USA; - Brookhaven National Laboratory, Upton, NY, USA. Besides the large designs and systems described below, some interesting works have been made for the departments of our Institute and other institutions: 1.Mechanical Structure for Time of Flight Wall for PHOBOS Experiment at Brookhaven National Laboratory. 2. The works for Cyclotron Section: In 1999 the following units of beam extraction channel of cyclotron AIC-144: - Magnetic channel I; - Magnetic channel II; - Magnetic channel III; - Devices for measurements magnetic field in the region of magnetic channels I, II and III, inside the cyclotron chamber; - Deflector I; - Deflector II; - Deflector III for extraction cyclotron beam outside the cyclotron chamber. 3. Manufacturing of mechanical elements of gradient coils. 4.Manufacturing of Anticoincidence Shielding for Low-Background Measurements of Radioactive Contamination of the Environment. 5. The upgrade of Luminosity Monitor for ZEUS Experiment at DESY. (author)

  18. Fiscal 1999 international engineer exchange project (Coal mining technology field). Overseas workshop (Australia); 1999 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Kaigai workshop (Goshu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This report summarizes the technology exchange with Australian coal mining engineers, the technical levels and needs on coal production, safety and environment in Australia, and the FS result on transfer of Japanese technologies, engineer exchange and joint research in a coal mining technology field. The overseas workshop (Australia) was held on Nov. 9, 1999 (Tues.) in Brisbane, Queensland. The Australia-Japan Technology Exchange Workshop on coal resources and coal mining technology includes 5 sessions (keynote address, trends and issues of coal resource development, coal resources and production technology, coal resources and safety technology, coal resources and environmental problems), and the open forum discussion on innovative technologies for coal mining. 6 Japanese specialists and 11 Australian specialists read papers. After the workshop, the participants visited Liddell Mine in New South Wales to master natural conditions, and production and safety technology levels of Australian coal mines, and to exchange various information with Australian coal mining engineers. (NEDO)

  19. Reports on the AAAI 1999 Workshop Program

    OpenAIRE

    Drabble, Brian; Chaudron, Laurent; Tessier, Catherine; Abu-Hakima, Sue; Willmott, Steven; Austin, Jim; Faltings, Boi; Freuder, Eugene C.; Friedrich, Gerhard; Freitas, Alex A.; Cortes, U.; Sanchez-Marre, M.; Aha, David W.; Becerra-Fernandez, Irma; Munoz-Avila, Hector

    2000-01-01

    The AAAI-99 Workshop Program (a part of the sixteenth national conference on artificial intelligence) was held in Orlando, Florida. The program included 16 workshops covering a wide range of topics in AI. Each workshop was limited to approximately 25 to 50 participants. Participation was by invitation from the workshop organizers. The workshops were Agent-Based Systems in the Business Context, Agents' Conflicts, Artificial Intelligence for Distributed Information Networking, Artificial Intell...

  20. PV radiometrics workshop proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Myers, D.R.

    1995-09-01

    This report documents presentations and discussions held at the Photovoltaics Radiometeric Measurements Workshop conducted at Vail, Colorado, on July 24 and 25, 1995. The workshop was sponsored and financed by the Photovoltaic Module and Systems Performance and Engineering Project managed by Richard DeBlasio, Principal Investigator. That project is a component of the National Renewable Energy Laboratory (NREL) Photovoltaic Research and Development Program, conducted by NREL for the US Department of Energy, through the NREL Photovoltaic Engineering and Applications Branch, managed by Roland Hulstrom. Separate abstracts have been prepared for articles from this workshop.

  1. Leadership Workshops for Adult Girl Scout Leaders

    Science.gov (United States)

    Lebofsky, Larry A.; McCarthy, Donald; DeVore, Edna; Harman, Pamela; Reaching Stars Team

    2016-10-01

    This year, the University of Arizona is conducting its first two Leadership Workshops for Girl Scout adult leaders. These workshops are being supported by a five-year NASA Collaborative Agreement, Reaching for the Stars: NASA Science for Girl Scouts (www.seti.org/GirlScoutStars), through the SETI Institute in collaboration with the University of Arizona, Girl Scouts of the USA (GSUSA), the Girl Scouts of Northern California, the Astronomical Society of the Pacific, and Aries Scientific, Inc. These workshops are an outgrowth of Astronomy Camp for Girl Scout Leaders, a 14-year "Train the Trainer" program funded by NASA through the James Webb Space Telescope's Near Infrared Camera (NIRCam) education and outreach team. We are continuing our long-term relationship with all Girl Scout Councils to engage girls and young women not only in science and math education, but also in the astronomical and technological concepts relating to NASA's scientific mission. Our training aligns with the GSUSA Journey: It's Your Planet-Love It! and introduces participants to some of the activities that are being developed by the Girl Scout Stars team for GSUSA's new space science badges for all Girl Scout levels being developed as a part of Reaching for the Stars: NASA Science for Girl Scouts.The workshops include hands-on activities in basic astronomy (night sky, stars, galaxies, optics, telescopes, etc.) as well as some more advanced concepts such as lookback time and the expansion of the Universe. Since the inception of our original Astronomy Camp in 2003, our team has grown to include nearly 280 adult leaders, staff, and volunteers from over 79 Councils in 43 states and the District of Columbia so they can, in turn, teach young women essential concepts in astronomy, the night sky environment, applied math, and engineering. Our workshops model what astronomers do by engaging participants in the process of science inquiry, while equipping adults to host astronomy-related programs with

  2. North Region ROW tool implementation workshop.

    Science.gov (United States)

    2010-08-02

    Welcome to the North Region ROW Tool Workshop. This workshop is funded under an implementation project sponsored by TxDOTs Research & Technology Implementation Office (RTI). This is the second of four regional workshops being planned for this summ...

  3. The first international workshop on "Advancement of POLarimetric Observations: calibration and improved aerosol retrievals": APOLO-2017

    Science.gov (United States)

    Dubovik, Oleg; Li, Zhengqiang; Mishchenko, Michael I.

    2018-06-01

    The international workshop on "Advancement of POLarimetric Observations: calibration and improved aerosol retrievals-2017" (APOLO-2017) took place in Hefei, China on 24 - 27 October 2017. This was the inaugural meeting of a planned series of workshops on satellite polarimetry aimed at addressing the rapidly growing interest of the scientific community in polarimetric remote-sensing observations from space. The workshop was held at the Anhui Institute of Optics and Fine Mechanics, Hefei, widely known for 15 years of experience in the development of research polarimetry sensors and for hosting the building in parallel of several orbital polarimeters.

  4. WORKSHOP: Stable particle motion

    International Nuclear Information System (INIS)

    Ruggiero, Alessandro G.

    1993-01-01

    Full text: Particle beam stability is crucial to any accelerator or collider, particularly big ones, such as Brookhaven's RHIC heavy ion collider and the larger SSC and LHC proton collider schemes. A workshop on the Stability of Particle Motion in Storage Rings held at Brookhaven in October dealt with the important issue of determining the short- and long-term stability of single particle motion in hadron storage rings and colliders, and explored new methods for ensuring it. In the quest for realistic environments, the imperfections of superconducting magnets and the effects of field modulation and noise were taken into account. The workshop was divided into three study groups: Short-Term Stability in storage rings, including chromatic and geometric effects and correction strategies; Long-Term Stability, including modulation and random noise effects and slow varying effects; and Methods for determining the stability of particle motion. The first two were run in parallel, but the third was attended by everyone. Each group considered analytical, computational and experimental methods, reviewing work done so far, comparing results and approaches and underlining outstanding issues. By resolving conflicts, it was possible to identify problems of common interest. The workshop reaffirmed the validity of methods proposed several years ago. Major breakthroughs have been in the rapid improvement of computer capacity and speed, in the development of more sophisticated mathematical packages, and in the introduction of more powerful analytic approaches. In a typical storage ring, a particle may be required to circulate for about a billion revolutions. While ten years ago it was only possible to predict accurately stability over about a thousand revolutions, it is now possible to predict over as many as one million turns. If this trend continues, in ten years it could become feasible to predict particle stability over the entire storage period. About ninety participants

  5. Experimental evaluation of the Skylab orbital workshop ventilation system concept

    Science.gov (United States)

    Allums, S. L.; Hastings, L. J.; Ralston, J. T.

    1972-01-01

    Extensive testing was conducted to evaluate the Orbital Workshop ventilation concept. Component tests were utilized to determine the relationship between operating characteristics at 1 and 0.34 atm. System tests were conducted at 1 atm within the Orbital Workshop full-scale mockup to assess delivered volumetric flow rate and compartment air velocities. Component tests with the Anemostat circular diffusers (plenum- and duct-mounted) demonstrated that the diffuser produced essentially equivalent airflow patterns and velocities in 1- and 0.34-atm environments. The tests also showed that the pressure drop across the diffuser could be scaled from 1 to 0.34 atm using the atmosphere pressure ratio. Fan tests indicated that the performance of a multiple, parallel-mounted fan cluster could be predicted by summing the single-fan flow rates at a given delta P.

  6. Proceedings of twelfth ISMAS symposium cum workshop on mass spectrometry

    International Nuclear Information System (INIS)

    Alamelu, D.; Jaison, P.G.; Aggarwal, S.K.

    2007-03-01

    Mass Spectrometry is an important analytical tool and has encompassed almost all branches of science and technology including Agricultural, biology, Chemistry, Earth sciences, environment, Forensic Science, Medical Sciences, Hydrology, Nuclear Technology, Oceanography, Physics etc. Recent advancements in the instrumentation of Mass Spectrometry have further strengthened its role for various applications. It is indeed a matter of great pleasure to present this special Issue of ISMAS Bulletin which is brought out on the occasion of the 12th ISMAS Symposium cum Workshop on Mass spectrometry (12th ISMAS-WS 2007) being held at Cidade-de-Goa, Dona Paula, Goa from March 25 to 30, 2007 in association with National Institute of Oceanography, Goa. This Symposium cum Workshop is co-sponsored by Scientific Departments of Government of India. Papers relevant to INIS are indexed separately

  7. Multidisciplinary workshops: learning to work together.

    Science.gov (United States)

    Fatchett, Anita; Taylor, Dawn

    2013-03-01

    Health and social care professional practice needs to move with the times and to respond to the ever-changing combination of health needs, economic realities and health-policy imperatives. A clear understanding of the variety of forces at play and the ability to marshal these to good effect by working in partnership with multidisciplinary colleagues and children/families is a must, not least in this time of economic austerity and ever-rising health inequalities, when vulnerable children's lives and complex family relationships and behaviours so easily become increasingly strained and challenged. This sad reality calls out for relevant joined-up solutions by all participants--an agenda so often called into question by court judgement after court judgement. The multidisciplinary workshops to be discussed have developed and changed over the past decade and provide a safe but realistic learning environment for students from health and social care backgrounds to experience the difficulties and barriers to good multidisciplinary working, to better understand others' perspectives and activities and consider and develop new and better practical strategies for working with multidisciplinary professional colleagues, children and families. All of the workshops are underpinned by specific discipline-focused theoretical work.

  8. Proceedings of the workshop on advanced thermal-hydraulic and neutronic codes: current and future applications

    International Nuclear Information System (INIS)

    2001-01-01

    An OECD Workshop on Advanced Thermal-Hydraulic and Neutronic Codes Applications was held from 10 to 13 April 2000, in Barcelona, Spain, sponsored by the Committee on the Safety of Nuclear Installations (CSNI) of the OECD Nuclear Energy Agency (NEA). It was organised in collaboration with the Spanish Nuclear Safety Council (CSN) and hosted by CSN and the Polytechnic University of Catalonia (UPC) in collaboration with the Spanish Electricity Association (UNESA). The objectives of the Workshop were to review the developments since the previous CSNI Workshop held in Annapolis [NEA/CSNI/ R(97)4; NUREG/CP-0159], to analyse the present status of maturity and remnant needs of thermal-hydraulic (TH) and neutronic system codes and methods, and finally to evaluate the role of these tools in the evolving regulatory environment. The Technical Sessions and Discussion Sessions covered the following topics: - Regulatory requirements for Best-Estimate (BE) code assessment; - Application of TH and neutronic codes for current safety issues; - Uncertainty analysis; - Needs for integral plant transient and accident analysis; - Simulators and fast running codes; - Advances in next generation TH and neutronic codes; - Future trends in physical modeling; - Long term plans for development of advanced codes. The focus of the Workshop was on system codes. An incursion was made, however, in the new field of applying Computational Fluid Dynamic (CFD) codes to nuclear safety analysis. As a general conclusion, the Barcelona Workshop can be considered representative of the progress towards the targets marked at Annapolis almost four years ago. The Annapolis Workshop had identified areas where further development and specific improvements were needed, among them: multi-field models, transport of interfacial area, 2D and 3D thermal-hydraulics, 3-D neutronics consistent with level of details of thermal-hydraulics. Recommendations issued at Annapolis included: developing small pilot/test codes for

  9. International exchange project for the engineer exchange project (in coal mine technology area) in fiscal 1998. Overseas workshop; 1998 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Kaigai workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The international exchange project for the engineer exchange project (in coal mine technology area) in fiscal 1998, the 'Overseas workshop' has performed exchange in technologies with Australian coal mine engineers. The project refers to the Australian technological levels and needs in coal production, safety control and environment, as well as transfer of the Japanese coal mine technologies. This report summarizes the result of a survey on the engineer exchange project in the coal mine technology area and the possibility of joint researches. The 'overseas workshop' was held in November 1998 for two days in Brisbane City in QLD Province as the 'Japan-Australia coal technology workshop'. The 'Japan-Australia coal technology workshop' gave lectures in five sessions (the basic lecture, Japan-Australia high-speed excavation project, coal mine gas control project, exploration and resources, and development and experience of Japan). It also discussed two themes (mine safety management and rules, and greenhouse effect gases and coal mining). Two coal mines were visited thereafter to deepen the exchange with the Australian coal mine engineers. (NEDO)

  10. Psychosocial Mechanisms Linking the Social Environment to Mental Health in African Americans.

    Science.gov (United States)

    Mama, Scherezade K; Li, Yisheng; Basen-Engquist, Karen; Lee, Rebecca E; Thompson, Deborah; Wetter, David W; Nguyen, Nga T; Reitzel, Lorraine R; McNeill, Lorna H

    2016-01-01

    Resource-poor social environments predict poor health, but the mechanisms and processes linking the social environment to psychological health and well-being remain unclear. This study explored psychosocial mediators of the association between the social environment and mental health in African American adults. African American men and women (n = 1467) completed questionnaires on the social environment, psychosocial factors (stress, depressive symptoms, and racial discrimination), and mental health. Multiple-mediator models were used to assess direct and indirect effects of the social environment on mental health. Low social status in the community (p health. Psychosocial factors significantly jointly mediated the relationship between the social environment and mental health in multiple-mediator models. Low social status and social support were associated with greater perceived stress, depressive symptoms, and perceived racial discrimination, which were associated with poor mental health. Results suggest the relationship between the social environment and mental health is mediated by psychosocial factors and revealed potential mechanisms through which social status and social support influence the mental health of African American men and women. Findings from this study provide insight into the differential effects of stress, depression and discrimination on mental health. Ecological approaches that aim to improve the social environment and psychosocial mediators may enhance health-related quality of life and reduce health disparities in African Americans.

  11. PREFACE: Galactic Center Workshop 2006

    Science.gov (United States)

    Schödel, Rainer; Bower, Geoffrey C.; Muno, Michael P.; Nayakshin, Sergei; Ott, Thomas

    2006-12-01

    stars in an environment that was previously thought hostile to star formation. Highlights of the GC Workshop 2002 in Kona were certainly the extraordinary evidence for the black hole nature of Sagittarius A* provided by the observation of orbits of individual stars around the central dark mass of the Milky Way, and the observations of short radiation outbreaks from Sgr A* in the X-ray regime, the so-called flares. These events with their variability on the minute time scale provided additional hard evidence for the black hole nature of Sgr A*. Also, the new observational capabilities provided by Chandraand XMMprovided spectacular new insights into the physics of the GC. With the black hole nature of Sagittarius A* now confirmed beyond reasonable doubt, theory and observation are zooming into ever smaller scales, trying to understand the exact physics behind the extreme under-luminosity (10-9 10-10 in terms of Eddington luminosity) of Sagittarius A*. Especially observations of the submm, NIR, and X-ray flares appear to be promising sources to analyze the accretion physics of Sagittarius A* near its event horizon. Some flares may carry the actual imprint of plasma moving at relativistic velocities near the last orbit of the black hole. Another topic that has moved into the focus of attention is star formation near the central black hole. One, possibly two, disks of young massive stars in the central half parsec, generally assumed hostile to star formation, challenge current theories of star formation. Through new infrared integral field spectrometers there is now strong evidence that the stars in the immediate environment of Sagittarius A*, the so-called S-stars are B-type main sequence stars. There are many hypothesis for their origin, but no model could yet provide entirely satisfactory explanations for their existence. A significant number of new telescopes and instruments access ever greater detail at all wavelengths. The continuing development of (sub

  12. Workshop on APEC virtual center for environmental technology exchange; APEC kankyo gijutsu koryu virtual center workshop hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    At the 'policy maker workshop of the virtual center of APEC technology exchange' held in November 1997 in Osaka, Japan, it was agreed to organize study groups to discuss the scope of information provided by the virtual center, and to make common the classification systems and retrieval functions. In addition, the necessity was confirmed on international cooperation to promote establishment of virtual centers in different countries and territories. On the first day, Professor Ueda at the Kyoto University gave the basic lecture entitled 'global environment preservation and environmental technology transfer: problems and prospects'. Mr. Dan, the workshop manager gave the basic proposal entitled 'the future directionality of environmental technology exchange inside the APEC territories by using Internet'. Based on the basic proposal made on the first day, reports and discussions were given in the following sessions, where confirmation was made on the future directions. S1: establishment of the virtual centers in other countries and territories; S2: assurance of interchangeability of classification systems and retrieval functions in providing information, and S3: presentation of examples of inter-territorial exchange and the future directionality. (NEDO)

  13. Workshop on APEC virtual center for environmental technology exchange; APEC kankyo gijutsu koryu virtual center workshop hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    At the 'policy maker workshop of the virtual center of APEC technology exchange' held in November 1997 in Osaka, Japan, it was agreed to organize study groups to discuss the scope of information provided by the virtual center, and to make common the classification systems and retrieval functions. In addition, the necessity was confirmed on international cooperation to promote establishment of virtual centers in different countries and territories. On the first day, Professor Ueda at the Kyoto University gave the basic lecture entitled 'global environment preservation and environmental technology transfer: problems and prospects'. Mr. Dan, the workshop manager gave the basic proposal entitled 'the future directionality of environmental technology exchange inside the APEC territories by using Internet'. Based on the basic proposal made on the first day, reports and discussions were given in the following sessions, where confirmation was made on the future directions. S1: establishment of the virtual centers in other countries and territories; S2: assurance of interchangeability of classification systems and retrieval functions in providing information, and S3: presentation of examples of inter-territorial exchange and the future directionality. (NEDO)

  14. Buildings energy efficiency in the Southeast. Summary of workshop: Report to attendees

    Energy Technology Data Exchange (ETDEWEB)

    1993-01-01

    In June 1992, energy service providers from around the Southeastern United States gathered at the Shenandoah Environment and Education Center of Georgia Power Company, to discuss issues related to energy efficiency buildings in the region. The meeting was organized by an ad hoc planning committee under the auspices of the Atlanta Support Office of the DOE. The objectives of the Workshop were to provide a forum for regional energy service providers to discuss matters of mutual concern and to identify issues of particular relevance to the Southeast. What characterizes energy use in the Southeast? Most lists would include rapid population growth, high temperatures and humidity, a large air conditioning load on utilities, a relatively clean environment, and regulatory processes that seek to keep energy prices low. There was less unanimity on what are the priority issues. No definitive list of priorities emerged from the workshop. Participants did identify several areas where work should be initiated: networking, training/certification/education, performance of technical measures, and studies of market forces/incentives/barriers. The most frequently mentioned context for these work areas was that of utility programs. Presentations given during the first morning provided attendees an overview of energy use in the region and of building energy conservation programs being implemented both by state agencies and by utilities. These were the base for breakout and plenary sessions in which attendees expressed their views on specific topics. The regional need mentioned most often at the workshop was for networking among energy service providers in the region. In this context, this report itself is a follow up action. Participants also requested a regional directory of energy program resources. DOE agreed to assemble a preliminary directory based upon input from workshop attendees. Because the response was quick and positive, a directory is part of this document.

  15. Summer workshops for high-school science teachers

    International Nuclear Information System (INIS)

    Young, H.H.; Kohl, J.

    1975-01-01

    A total of 52 summer workshops attended by over 1700 high-school science teachers have been given by 27 universities in the period of 1971 to 1974. These workshops are funded by ERDA to provide factual material through educational channels so that the public could obtain an informed perspective of the role of nuclear energy as an electrical power source. The workshops have included lectures, panel discussions, laboratories, and field trips, and have emphasized providing teachers with materials for use in their classrooms. Actual use of workshop material has been monitored through workshop reports, meetings, and visits. Participants have used their workshop experience for classroom presentations, talks to the public, and for assembly programs. The material developed and the experience of presenting it has proved valuable for the nuclear engineering faculty members giving the workshops. They have used their experience in other courses, for public lectures, and for other workshops. And they have gained personal experience in methods of dealing with the nuclear power controversy. A review of these workshops indicates that they offer at a reasonable cost a productive method of presenting factual information on the various solutions to the complex electrical generation problem

  16. Opening Session - Introductory remarks for Workshop on Accident Tolerant Fuel. OECD/NEA Workshop on Accident Tolerant Fuels, Workshop Expectations

    International Nuclear Information System (INIS)

    Dujardin, Thierry; Gulliford, Jim; Massara, Simone; Pasamehmetoglu, K.

    2013-01-01

    The workshop opened with the welcome address from Th. Dujardin (OECD/NEA), NEA Deputy Director. Th. Dujardin recalled the integrated NEA response to the dramatic Fukushima-Daiichi events performed by three standing technical committees: the Committee on Nuclear Regulatory Activities (CNRA), the Committee on the Safety of Nuclear Installations (CSNI) and the Committee on Radiation Protection and Public Health (CRPPH). J. Gulliford (OECD/NEA) placed the workshop in the context of the activities of the Nuclear Science Committee within the framework of the NEA response to Fukushima- Daiichi. K. Pasamehmetoglu (INL, US) explained the main goals of the workshop oriented towards defining requirements for selection among various options during the feasibility phase of the development process, and not towards identifying and proposing design solutions

  17. Reports on the 2015 AAAI Workshop Program

    OpenAIRE

    Albrecht, Stefano V.; Beck, J. Christopher; Buckeridge, David L.; Botea, Adi; Caragea, Cornelia; Chi, Chi-hung; Damoulas, Theodoros; Dilkina, Bistra; Eaton, Eric; Fazli, Pooyan; Ganzfried, Sam; Giles, C. Lee; Guillet, Sébastian; Holte, Robert; Hutter, Frank

    2015-01-01

    AAAI's 2015 Workshop Program was held Sunday and Monday, January 25–26, 2015 at the Hyatt Regency Austin Hotel in Austion, Texas, USA. The AAAI-15 workshop program included 15 workshops covering a wide range of topics in artificial intelligence. Most workshops were held on a single day. The titles of the workshops included AI and Ethics, AI for Cities, AI for Transportation: Advice, Interactivity and Actor Modeling, Algorithm Configuration, Artificial Intelligence Applied to Assistive Technol...

  18. NKS Workshop on Radioanalytical Chemistry - Final report

    DEFF Research Database (Denmark)

    The NKS-B workshop on radioanalytical chemistry was held 2-6th Sept 2013 at Risø, Denmark. There were a total of 49 persons participating in the workshop, including 32 young participants and 15 lecturers. The work-shop started with 3 days of lab practice followed by 1.5 day’s lectures by the expe......The NKS-B workshop on radioanalytical chemistry was held 2-6th Sept 2013 at Risø, Denmark. There were a total of 49 persons participating in the workshop, including 32 young participants and 15 lecturers. The work-shop started with 3 days of lab practice followed by 1.5 day’s lectures...

  19. 2017 Marine Hydrokinetic Instrumentation Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    Driscoll, Frederick R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Mauer, Erik [U.S. Department of Energy; Rieks, Jeff [Allegheny Science and Technologies

    2018-03-06

    The third Marine Hydrokinetic Instrumentation Workshop was held at Florida Atlantic University's Sea Tech Campus in Dania Beach, Florida, from February 28 to March 1, 2017. The workshop brought together 37 experts in marine energy measurement, testing, and technology development to present and discuss the instrumentation and data-processing needs of the marine energy industry. The workshop was comprised of a plenary session followed by two focused breakout sessions. The half-day plenary session reviewed findings from prior instrumentation workshops, presented research activities that aim to fill previously identified gaps, and had industry experts present the state of the marine energy measurement technologies. This report provides further detail on the workshop, objectives, and findings.

  20. Physics Analysis Tools Workshop Report

    CERN Multimedia

    Assamagan, K A

    A Physics Analysis Tools (PAT) workshop was held at the University of Tokyo in Tokyo Japan on May 15-19, 2006. Unlike the previous ones, this workshop brought together the core PAT developers and ATLAS users. The workshop was attended by 69 people from various institutions: Australia 5 Canada 1 China 6 CERN 4 Europe 7 Japan 32 Taiwan 3 USA 11 The agenda consisted of a 2-day tutorial for users, a 0.5-day user feedback discussion session between users and developers, and a 2-day core PAT workshop devoted to issues in Physics Analysis Tools activities. The tutorial, attended by users and developers, covered the following grounds: Event Selection with the TAG Event Selection Using the Athena-Aware NTuple Event Display Interactive Analysis within ATHENA Distributed Analysis Monte Carlo Truth Tools Trigger-Aware Analysis Event View By many accounts, the tutorial was useful. This workshop was the first time that the ATLAS Asia-Pacific community (Taiwan, Japan, China and Australia) go...

  1. 6th Workshop on Virtual Machines and Intermediate Languages (VMIL’12)

    NARCIS (Netherlands)

    Rajan, Hridesh; Hauptmann, Michael; Bockisch, Christoph; Blackburn, Steve

    2012-01-01

    The VMIL workshop is a forum for research in virtual machines and intermediate languages. It is dedicated to identifying programming mechanisms and constructs that are currently realized as code transformations or implemented in libraries but should rather be supported at VM level. Candidates for

  2. Systems Engineering 2010 Workshop | Wind | NREL

    Science.gov (United States)

    0 Workshop Systems Engineering 2010 Workshop The 1st NREL Wind Energy Systems Engineering Workshop of the system engineering model. In the middle of the model is optimization, metric tracking &M model, capital cost model, and balance of station. Systems engineering represents a holistic

  3. SPLASH'13 workshops summary

    DEFF Research Database (Denmark)

    Balzer, S.; Schultz, U. P.

    2013-01-01

    Following its long-standing tradition, SPLASH 2013 will host 19 high-quality workshops, allowing their participants to meet and discuss research questions with peers, to mature new and exciting ideas, and to build up communities and start new collaborations. SPLASH workshops complement the main t...

  4. 6th International Microbeam Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Dr Kevin M. Prise

    2004-01-01

    The extended abstracts which are submitted here present a summary of the proceedings of the 6th International Workshop/12th LH Gray Workshop: Microbeam Probes of Cellular Radiation Response, held at St. Catherine's College, University of Oxford, UK on March, 29th-31st, 2003. In 1993 the 4th LH Gray Workshop entitled ''Microbeam Probes of Cellular Radiation Response'' was held at the Gray Cancer Institute in Northwood. This was organized by Prof BD Michael, Dr M. Folkard and Dr KM Prise and brought together 40 participants interested in developing and applying new microbeam technology to problems in radiation biology (1). The workshop was an undoubted success and has spawned a series of subsequent workshops every two years. In the past, these workshops have been highly successful in bringing together groups interested in developing and applying micro-irradiation techniques to the study of cell and tissue damage by ionizing radiations. Following the first microbeam workshop, there has been a rapid growth in the number of centres developing radiobiology microbeams, or planning to do so and there are currently 15-20 worldwide. Much of the recent research using microbeams has used them to study low-dose effects and ''non-targeted'' responses such bystander effects, genomic instability and adaptive responses. The goal of the 6th workshop was to build on our knowledge of the development of microbeam approaches and the application to radiation biology in the future with the meeting stretching over a 3 day period. Over 80 participants reviewed the current state of radiobiology microbeam research worldwide and reported on new technological developments both in the fields of physics and biology.

  5. ETICS User feedback and Usability Workshop

    CERN Document Server

    Begin, Marc-Elian

    2007-01-01

    As ETICS is gaining momentum, its user community is growing. We now have over 15 projects (mainly Grid related) from different grid user communities; for example: gLite developers and integrators, high-level services developers (e.g. GridWay and DILIGENT). This workshop will provide an opportunity for exchange between the growing ETICS user community and ETICS developers. ETICS is powered by Grid middleware, via the NMI/Condor that ‘We're using the Grid to build the Grid’. This is why ETICS can claim The Grid allows ETICS users to transparently build and test complex software on a wide range of architecture, operating system and environments, in turn accelerating the ability for software to properly execute in heterogeneous environment like Grids. We are not yet able to run on the EGEE infrastructure, since we're missing an important element: virtualisation. As soon as we are able to ship with a build and test job a VM of the environment required for the job, we'll be able to exploit the full power of the...

  6. Light Water Reactor Pressure Vessel Surveillance Dosimetry Improvement Program. PSF Blind Test workshop minutes. Summary

    International Nuclear Information System (INIS)

    Guthrie, G.L.; Lippincott, E.P.; McGarry, E.D.

    1984-01-01

    A ''Blind Test'' workshop was held on April 9-11, 1984, at the Holiday Inn in Richland, WA. At the workshop, participant groups compared ''Blind'' calculations with existing data which was unavailable to them at the time the calculations were made. The purpose of the exercise was to allow each participant group to test the group's ability to predict ''in-wall'' mechanical property degradation for a simulated nuclear reactor pressure vessel irradiation

  7. Nuclear Innovation Workshops Report

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, John Howard [Idaho National Lab. (INL), Idaho Falls, ID (United States); Allen, Todd Randall [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hildebrandt, Philip Clay [Idaho National Lab. (INL), Idaho Falls, ID (United States); Baker, Suzanne Hobbs [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-09-01

    The Nuclear Innovation Workshops were held at six locations across the United States on March 3-5, 2015. The data collected during these workshops has been analyzed and sorted to bring out consistent themes toward enhancing innovation in nuclear energy. These themes include development of a test bed and demonstration platform, improved regulatory processes, improved communications, and increased public-private partnerships. This report contains a discussion of the workshops and resulting themes. Actionable steps are suggested at the end of the report. This revision has a small amount of the data in Appendix C removed in order to avoid potential confusion.

  8. Highlights and Comments from a Regulator's Workshop

    International Nuclear Information System (INIS)

    Jensen, Mikael

    2002-01-01

    Mikael Jensen (SSI, Sweden) presented the feedback of the regulatory workshop that took place in Sweden in September 2001, titled 'The Role of Future Society and Biosphere in Demonstrating Compliance with High-level Radioactive Waste Disposal Standards and Regulations'. The theme included questions such as how to meet regulatory compliance with an evolving biosphere and how will regulators judge compliance? During the Workshop, presentations were made from international regulatory aspects such as IAEA or ICRP. There were also very interesting country-by-country presentation such as the Finnish presentation by STUK which specifies limits on radionuclide releases from a repository after a thousand years or so. There appears to be a consensus on the relevance developing initiatives on the sustainable development, the protection of the environment and addressing long time scales. One technical aspects, the geosphere/biosphere interface, was viewed as a key issue for future study and analysis

  9. Growth reponses of eggplant and soybean seedlings to mechanical stress in greenhouse and outdoor environments

    Science.gov (United States)

    Latimer, J. G.; Pappas, T.; Mitchell, C. A.

    1986-01-01

    Eggplant (Solanum melongena L. var. esculentum 'Burpee's Black Beauty') and soybean [Glycine max (L.) Merr. 'Wells II'] seedlings were assigned to a greenhouse or a windless or windy outdoor environment. Plants within each environment received either periodic seismic (shaking) or thigmic (flexing or rubbing) treatment, or were left undisturbed. Productivity (dry weight) and dimensional (leaf area and stem length) growth parameters generally were reduced more by mechanical stress in the greenhouse (soybean) or outdoor-windless environment (eggplant) than in the outdoor windy environment. Outdoor exposure enhanced both stem and leaf specific weights, whereas mechanical stress enhanced only leaf specific weight. Although both forms of controlled mechanical stress tended to reduce node and internode diameters of soybean, outdoor exposure increased stem diameter.

  10. IFPA Meeting 2013 Workshop Report II

    DEFF Research Database (Denmark)

    Ackerman, W E; Adamson, L; Carter, Anthony Michael

    2013-01-01

    Workshops are an important part of the IFPA annual meeting as they allow for discussion of specialized topics. At the IFPA meeting 2013 twelve themed workshops were presented, five of which are summarized in this report. These workshops related to various aspects of placental biology but collecti...

  11. IFPA meeting 2012 workshop report I

    DEFF Research Database (Denmark)

    Ackerman, W E; Carter, Anthony Michael; De Mestre, A M

    2013-01-01

    Workshops are an important part of the IFPA annual meeting as they allow for discussion of specialized topics. At IFPA meeting 2012 there were twelve themed workshops, three of which are summarized in this report. These workshops related to various aspects of placental biology but collectively...

  12. Randomized Trial of a Calling-Infused Career Workshop Incorporating Counselor Self-Disclosure

    Science.gov (United States)

    Dik, Bryan J.; Steger, Michael F.

    2008-01-01

    A randomized controlled trial was used to test (1) the efficacy of a two-session career development workshop for college student participants; (2) the effect of counselor self-disclosure on outcomes; and (3) the effect of infusing calling and vocation concepts on outcomes. Both standard (person-environment fit) and calling/vocation-infused…

  13. Evaluation of the Career Planning Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Gibson, L.W.

    1986-04-01

    People who apply to participate in this workshop appear to be genuinely interested in personal development. Participants reported that they were not very happy with several aspects of their jobs prior to the workshop. Predominant personality characteristics of the participants were shyness, communication anxiety, reserved style, cautiousness, moodiness, energetic, hard-working and analytical minded. Participants were favorably impressed with the workshop. One of the most potent ways that the workshop impacts participants is through improved self understanding and enhanced self-esteem. Many people did change jobs following the workshop. Of those who did not actually change jobs, almost half reported that they had modified their present job to achieve a better person-job fit. Participants did not report many changes in their routine behavior although they kept the supervisor more informed of their job activity. Current job satisfaction is good among the participants. Although the workshop is fairly expensive to provide, the long range benefits in terms of enhanced levels of performance far outweigh the costs.

  14. 1998 federal technical standards workshop: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-10-01

    The theme for the 1998 workshop was Standards Management -- A World of Change and Opportunities. The workshop`s goal was to further the implementation of the National Technology Transfer and Advancement Act of 1995 (Public Law 104-113) through the sharing of standards management success stories, lessons learned, and emerging initiatives within the Executive Branch of the Federal Government. The target audience for this workshop included agency/department and contractor personnel and representatives of standards developing organizations that either used technical standards in their work for the Federal Government of participated in standards writing/management activities in support of the missions and programs of Federal agencies/departments. As with previous standards workshops sponsored by the DOE, views on the technical subject areas under the workshop theme were solicited from and provided by agency Standards Executives and standards program managers, voluntary standards organizations, and the private sector. This report includes vugraphs of the presentations.

  15. Planetary Science Education - Workshop Concepts for Classrooms and Internships

    Science.gov (United States)

    Musiol, S.; Rosenberg, H.; Rohwer, G.; Balthasar, H.; van Gasselt, S.

    2014-12-01

    In Germany, education in astronomy and planetary sciences is limited to very few schools or universities and is actively pursued by only selected research groups. Our group is situated at the Freie Universität Berlin and we are actively involved in space missions such as Mars Express, Cassini in the Saturnian system, and DAWN at Vesta and Ceres. In order to enhance communication and establish a broader basis for building up knowledge on our solar-system neighborhood, we started to offer educational outreach in the form of workshops for groups of up to 20 students from primary/middle schools to high schools. Small group sizes guarantee practical, interactive, and dialog-based working environments as well as a high level of motivation. Several topical workshops have been designed which are targeted at different age groups and which consider different educational background settings. One workshop called "Impact craters on planets and moons" provides a group-oriented setting in which 3-4 students analyze spacecraft images showing diverse shapes of impact craters on planetary surfaces. It is targeted not only at promoting knowledge about processes on planetary surfaces but it also stimulates visual interpretation skills, 3D viewing and reading of map data. A second workshop "We plan a manned mission to Mars" aims at fostering practical team work by designing simple space mission scenarios which are solved within a team by collaboration and responsibility. A practical outdoor activity called "Everything rotates around the Sun" targets at developing a perception of absolute - but in particular relative - sizes, scales and dimensions of objects in our solar system. Yet another workshop "Craters, volcanoes and co. - become a geologist on Mars" was offered at the annual national "Girls' Day" aiming at motivating primary to middle school girls to deal with topics in classical natural sciences. Small groups investigated and interpreted geomorphologic features in image data of

  16. Proceedings of the Santa Fe workshop on electron effects

    International Nuclear Information System (INIS)

    Wang, T.S.; Jason, A.

    1998-01-01

    The Workshop was held under the sponsorship of the Spallation Neutron Source (SNS) Project to further project understanding of the effects and cause of the presence of electrons in proton accelerators. In particular, the fast instability seen in the Los Alamos Proton Storage Ring was the major topic of discussion since it limits the particles/pulse to the LANSCE target and could have an impact on the SNS Ring. This instability is believed due to the interaction of trapped electrons in the accumulated beam, i.e., an electron-proton or e-p instability. The first day of the workshop was occupied by invited talks that included a review of e-p instability theory, an overview of PSR observations, observations at other laboratories, reviews of electron-production mechanisms, theoretical studies on the PSR instability, and design issues of the SNS ring. For the second day, the workshop was organized into three working groups: a theory and computation group, a past-experiences and proposed-experiments group, and the SNS-design-strategy group. Their charter was to summarize previous work in their respective areas and to originate a course for future progress. The results of the working groups and the workshop were summarized in a joint session during the morning of the third day. These proceedings are a simple collection of the viewgraphs used as submitted to a member of the LANL secretarial staff by speakers

  17. FY 2000 international exchange project on exchanges of engineers - Coal mine technology field. Overseas workshop (China); 2000 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Kaigai workshop (Chugoku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of making technical exchanges with coal mine related engineers in China and surveying levels of coal production technology and the needs in China and possibilities of technology transfer from Japan, workshop was held and technical tours were made. On December 13, 2000, a workshop was held in China which was named 'Japan-China Joint Coal Project Workshop: Environment/Production/Security.' Participants were 112 including 16 from Japan and 96 from China. Subjects were as follows: subjects on coal resource and technical strategy in the 21st century, technical exchange project and technical development, Japan-China technical cooperation project, report on the operational situation of China Coal Industry Environmental Preservation Safety Training Center, Japan-China Joint Project on spontaneous combustion prevention technology, CMG recovery/utilization system joint demonstration project, Japan-China joint coal exploration project, Japan-China coal field geology joint exploration project, etc. (NEDO)

  18. ISEE-magnetopause observations - workshop results

    International Nuclear Information System (INIS)

    Paschmann, G.

    1982-01-01

    A brief history of ISEE magnetopause workshops held during 1977-1981 is presented, and an assessment of the activity of these workshops is made. Workshop results are surveyed, with attention given to magnetopause thickness and speed, large-scale reconnection, small-scale reconnection, magnetic field topology, plasma waves, boundary layer structure, surface waves, plasma origin, and the relationship between magnetopause and particle boundaries. Finally, a few topics that require particular attention in the future are mentioned

  19. IFPA meeting 2010 workshop report I

    DEFF Research Database (Denmark)

    Abad, C.; Antczak, D.F.; Carvalho, J.

    2011-01-01

    Workshops are an important part of the IFPA annual meeting. At IFPA Meeting 2010 there were twelve themed workshops, six of which are summarized in this report. 1. The immunology workshop focused on normal and pathological functions of the maternal immune system in pregnancy. 2. The transport wor...

  20. Psychosocial Mechanisms Linking the Social Environment to Mental Health in African Americans.

    Directory of Open Access Journals (Sweden)

    Scherezade K Mama

    Full Text Available Resource-poor social environments predict poor health, but the mechanisms and processes linking the social environment to psychological health and well-being remain unclear. This study explored psychosocial mediators of the association between the social environment and mental health in African American adults. African American men and women (n = 1467 completed questionnaires on the social environment, psychosocial factors (stress, depressive symptoms, and racial discrimination, and mental health. Multiple-mediator models were used to assess direct and indirect effects of the social environment on mental health. Low social status in the community (p < .001 and U.S. (p < .001 and low social support (p < .001 were associated with poor mental health. Psychosocial factors significantly jointly mediated the relationship between the social environment and mental health in multiple-mediator models. Low social status and social support were associated with greater perceived stress, depressive symptoms, and perceived racial discrimination, which were associated with poor mental health. Results suggest the relationship between the social environment and mental health is mediated by psychosocial factors and revealed potential mechanisms through which social status and social support influence the mental health of African American men and women. Findings from this study provide insight into the differential effects of stress, depression and discrimination on mental health. Ecological approaches that aim to improve the social environment and psychosocial mediators may enhance health-related quality of life and reduce health disparities in African Americans.

  1. Summary and report on four national environmental workshops

    Energy Technology Data Exchange (ETDEWEB)

    House, Peter W.

    1980-07-01

    Individual abstracts were prepared for the summaries of four workshops held during the last two years: (1) Integrated Assessment for Energy Related Environmental Standards Workshop - Berkeley, California, November 1978; (2) National Ecological Assessment Workshop - Savannah, Georgia, January 1979; (3) National/Regional Modelling Workshop - Reston, Virginia, May 1979; (4) Groundwater Workshop - Albuquerque, New Mexico, January 1980. (JGB)

  2. Workshop of medical physics

    International Nuclear Information System (INIS)

    1988-01-01

    This event was held in San Carlos de Bariloche, Argentine Republic from 14 th. through 18 th. November, 1988. A great part of the physicians in the area of medical physics participated in this workshop. This volume includes the papers presented at this Workshop of Medical Physics [es

  3. Workshops on Writing Science

    Indian Academy of Sciences (India)

    2017-09-30

    Sep 30, 2017 ... hands-on practice, feedback, mentoring and highly interactive sessions. The focus will be on work done as individuals and in teams. Maximum number of participants for the workshop is limited. The workshop is compulso- rily residential. Boarding and lodging free for selected candidates. Re-imbursement ...

  4. Proceedings of the workshop on 'anomalous electronic states and physical properties in high-temperature superconductors'

    International Nuclear Information System (INIS)

    Arai, Masatoshi; Kajimoto, Ryoichi

    2007-03-01

    A workshop entitled 'Anomalous Electronic States and Physical Properties in High-Temperature Superconductors' was held on November 7-8, 2006 at Institute for Materials Research, Tohoku University. In the workshop, leading scientists in the field of high-T c superconductivity, both experimentalists and theorists, gathered in a hall to report the recent progress of the study, clarify the problems to be solved, and discuss the future prospects. The workshop was jointly organized by Specially Promoted Research of MEXT, Development of the 4D Spaces Access Neutron Spectrometer and Elucidation of the Mechanism of Oxide High-T c Superconductivity' (repr. by M. Arai, JAEA) and by the Inter-university Cooperative Research Program of the Institute for Materials Research, Tohoku University, 'Anomalous Electronic States and Physical Properties in High-Temperature Superconductors' (repr. by T. Tohyama, Kyoto Univ.). This report includes abstracts and materials of the presentations in the workshop. (author)

  5. Review of the SLAC and Les Houches workshops

    International Nuclear Information System (INIS)

    Prescott, C.Y.

    1994-12-01

    Polarized Electron Source workshops have been held at varying intervals, beginning in 1983 when Charles Sinclair convened the first at SLAC. Since that time, three workshops were held in conjunction with the International Spin Symposia and two at other occasions. The increasing importance of polarized electron beams at accelerators has stimulated interest in these workshops. Two workshops have been held since the last International Spin Symposium in Nagoya. In 1993, a workshop was held at SLAC, and in 1994 at Les Houches, a polarized electron beam session was held as part of a polarized beam and targets workshop. This report summarizes highlights from the latter two workshops

  6. WALLTURB International Workshop

    CERN Document Server

    Jimenez, Javier; Marusic, Ivan

    2011-01-01

    This book brings together selected contributions from the WALLTURB workshop on ”Understanding and modelling of wall turbulence” held in Lille, France, on April 21st to 23rd 2009. This workshop was organized by the WALLTURB consortium, in order to present to the relevant scientific community the main results of the project and to stimulate scientific discussions around the subject of wall turbulence. The workshop reviewed the recent progress in theoretical, experimental and numerical approaches to wall turbulence. The problems of zero pressure gradient, adverse pressure gradient and separating turbulent boundary layers were addressed in detail with the three approaches, using the most advanced tools. This book is a milestone in the research field, thanks to the high level of the invited speakers and the involvement of the contributors and a testimony of the achievement of the WALLTURB project.

  7. NCSE's 13th National Conference on Disasters and Environment: Science, Preparedness and Resilience, Post Conference Follow-up Activities and Dissemination

    Energy Technology Data Exchange (ETDEWEB)

    Saundry, Peter [National Council for Science and the Environment, Washington, DC (United States); Johns Hopkins Univ., Baltimore, MD (United States); Kossak, Shelley [National Council for Science and the Environment, Washington, DC (United States)

    2014-04-29

    The National Council for Science and the Environment (NCSE) received $15,000 from the US Department of Energy to support post-conference activities of the 13th National Conference on the theme of Disasters and the Environment: Science, Preparedness and Resilience, held on January 15-17, 2013 at the Ronald Reagan Building and International Trade Center in Washington, DC. Over 1,000 participants from the scientific, emergency response, policy, conservation, and business communities, as well as federal and local government officials, and international entities attended the event. The conference developed actionable outcomes that constructively advance the science behind decision-making on environmental disasters, with an intended result of more prepared and resilient communities in light of a changing climate. Disasters and Environment topic was addressed through six organizing themes: Cascading Disasters; Intersection of the Built and Natural Environments; Disasters as Mechanisms of Ecosystem Change; Rethinking Recovery and Expanding the Vision of Mitigation; Human Behavior and its Consequences; and "No Regrets" Resilience. The program featured eight plenary sessions, 24 symposia and 23 breakout workshops and addressed pivotal issues surrounding disasters and environment including lifeline services, the energy, climate, hazard nexus, grid collapse, community vulnerability, and natural resource management. Sessions, symposia and workshops were conducted by over 200 distinguished thought leaders, scientists, government officials, policy experts and international speakers throughout the three day event. Following the conference, NCSE prepared a set of recommendations and results from the workshops and disseminated the results to universities, organizations and agencies, the business community. NCSE’s national dissemination involved organized several targeted trips and meetings to disseminate significant findings to key stakeholder groups.

  8. Belgian Workshop (November 2003) - Executive Summary and International Perspective

    International Nuclear Information System (INIS)

    2004-01-01

    delegates to learn about the history, the natural environment and the socio-economic circumstances of potential host communities, as well as the day-by-day experiences of local people, involved in the local partnerships Visits also provided for interactions and exchange between local stakeholders and the FSC community. During Day 3 the central theme of the workshop was addressed. Invited plenary speakers including local stakeholders and social scientists gave presentations on how to integrate multiple interests, values and knowledge into joint risk management. Presentations provided a background to subsequent round table discussions, which allowed local stakeholders and international delegates to interact and exchange in detail. On Day 4 morning a panel discussion took place which focused on the design of a repository and investigated how it could reflect a plurality of interests, values, and knowledge. The rest of Day 4 was devoted to the feedback by two thematic rapporteurs. They evaluated the meeting from two distinct perspectives: that of urban and regional development, and of participatory decision making. This Executive Summary gives an overview of the presentations and discussions that took place at the workshop and the community visits. The structure of the Executive Summary follows the structure of the workshop itself. Complementary to this Executive Summary and also provided with this document, is a NEA Secretariat's reflection aiming to place the main lessons of the workshop into an international perspective

  9. Designing Environment for Teaching Internet of Things

    Science.gov (United States)

    Simic, Konstantin; Vujin, Vladimir; Labus, Aleksandra; Stepanic, Ðorde; Stevanovic, Mladen

    2014-01-01

    One of the new topics taught at technical universities is Internet of Things. In this paper, a workshop for organizing a lab in academic environment for the subject Internet of Things is described. The architecture of the platform, scenario and a description of components used for creating the environment for learning Internet of things are also…

  10. Boiling water reactor simulator. Workshop material

    International Nuclear Information System (INIS)

    2003-01-01

    The International Atomic Energy Agency (IAEA) has established an activity in nuclear reactor simulation computer programs to assist its Member States in education. The objective is to provide, for a variety of advanced reactor types, insight and practice in their operational characteristics and their response to perturbations and accident situations. To achieve this, the IAEA arranges for the development and distribution of simulation programs and workshop material and sponsors workshops. The workshops are in two parts: techniques and tools for reactor simulator development; and the use of reactor simulators in education. Workshop material for the first part is covered in the IAEA publication: Training Course Series No. 12, 'Reactor Simulator Development' (2001). Course material for workshops using a WWER- 1000 simulator from the Moscow Engineering and Physics Institute, Russian Federation is presented in the IAEA publication: Training Course Series No. 21 'WWER-1000 Reactor Simulator' (2002). Course material for workshops using a pressurized water reactor (PWR) simulator developed by Cassiopeia Technologies Incorporated, Canada, is presented in the IAEA publication: Training Course Series No. 22 'Pressurized Water Reactor Simulator' (2003). This report consists of course material for workshops using a boiling water reactor (BWR) simulator. Cassiopeia Technologies Incorporated, developed the simulator and prepared this report for the IAEA

  11. Warehouse Sanitation Workshop Handbook.

    Science.gov (United States)

    Food and Drug Administration (DHHS/PHS), Washington, DC.

    This workshop handbook contains information and reference materials on proper food warehouse sanitation. The materials have been used at Food and Drug Administration (FDA) food warehouse sanitation workshops, and are selected by the FDA for use by food warehouse operators and for training warehouse sanitation employees. The handbook is divided…

  12. A computational environment for creating and testing reduced chemical kinetic mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    Montgomery, C.J.; Swensen, D.A.; Harding, T.V.; Cremer, M.A.; Bockelie, M.J. [Reaction Engineering International, Salt Lake City, UT (USA)

    2002-02-01

    This paper describes software called computer assisted reduced mechanism problem solving environment (CARM-PSE) that gives the engineer the ability to rapidly set up, run and examine large numbers of problems comparing detailed and reduced (approximate) chemistry. CARM-PSE integrates the automatic chemical mechanism reduction code CARM and the codes that simulate perfectly stirred reactors and plug flow reactors into a user-friendly computational environment. CARM-PSE gives the combustion engineer the ability to easily test chemical approximations over many hundreds of combinations of inputs in a multidimensional parameter space. The demonstration problems compare detailed and reduced chemical kinetic calculations for methane-air combustion, including nitrogen oxide formation, in a stirred reactor and selective non-catalytic reduction of NOx, in coal combustion flue gas.

  13. Cathedral outreach: student-led workshops for school curriculum enhancement in non-traditional environments

    Science.gov (United States)

    Posner, Matthew T.; Jantzen, Alexander; van Putten, Lieke D.; Ravagli, Andrea; Donko, Andrei L.; Soper, Nathan; Wong, Nicholas H. L.; John, Pearl V.

    2017-08-01

    Universities in the United Kingdom have been driven to work with a larger pool of potential students than just the more traditional student (middle-class white male), in order to tackle the widely-accepted skills-shortage in the fields of science, technology, engineering and mathematics (STEM), whilst honoring their commitment to fair access to higher education. Student-led outreach programs have contributed significantly to this drive. Two such programs run by postgraduate students at the University of Southampton are the Lightwave Roadshow and Southampton Accelerate!, which focus on photonics and particle physics, respectively. The program ambassadors have developed activities to enhance areas of the national curriculum through presenting fundamental physical sciences and their applications to optics and photonics research. The activities have benefitted significantly from investment from international organizations, such as SPIE, OSA and the IEEE Photonics Society, and UK research councils, in conjunction with university recruitment and outreach strategies. New partnerships have been formed to expand outreach programs to work in non-traditional environments to challenge stereotypes of scientists. This paper presents two case studies of collaboration with education learning centers at Salisbury Cathedral and Winchester Cathedral. The paper outlines workshops and shows developed for pupils aged 6-14 years (UK key stages 2-4) on the electromagnetic spectrum, particle physics, telecommunications and the human eye using a combination of readily obtainable items, hand-built kits and elements from the EYEST Photonics Explorer kit. The activities are interactive to stimulate learning through active participation, complement the UK national curriculum and link the themes of science with the non-traditional setting of a cathedral. We present methods to evaluate the impact of the activity and tools to obtain qualitative feedback for continual program improvement. We also

  14. Crop-water-environment models; selected papers to the workshop organized by the ICID Working Group on `Sustainable Crops and Water Use' at the occasion of the 16th Congress of the International Commission on Irrigation and Drainage at Cairo, Egypt

    NARCIS (Netherlands)

    Ragab, R.; El-Din El-Quosy, D.; Broek, van den B.J.; Pereira, L.S.

    1996-01-01

    The main aim of this workshop was to bring individuals and organizations together who contribute to the development and upgrading of crop-water-environment models. Twenty-four model papers were presented in three sessions: pesticides and nitrates, salinity, and crop water balance. Each presentation

  15. Academic excellence workshops in chemistry and physics

    Science.gov (United States)

    Mills, Susan Rose

    In the mid-1970's, Uri Treisman, at the University of California, Berkeley, developed an academic excellence workshop program that had important successes in increasing minority student achievement and persistence in calculus. The present dissertation research is an in-depth study of chemistry and physics workshops at the California State Polytechnic University, Pomona. Data for the first, longitudinal component of this study were obtained by tracking to Spring 1998 all workshop minority students, i.e., Latino, African American, and Native American workshop students, a random sample of non-workshop minority students, and a random sample of non-targeted students, i.e., Anglo and Asian students, enrolled in first-quarter General Chemistry or Physics during specific quarters of 1992 or 1993. Data for the second component were obtained by administering questionnaires, conducting interviews, and observing science students during Fall, 1996. Workshop participation was a significant predictor of first-quarter course grade for minority students in both chemistry and physics, while verbal and mathematics Scholastic Aptitude Test (SAT) scores were not significant predictors of beginning course grade for minority science students. The lack of predictive ability of the SAT and the importance of workshop participation in minority students' beginning science course performance are results with important implications for educators and students. In comparing pre-college achievement measures for workshop and non-targeted students, non-targeted students' mathematics SAT scores were significantly higher than chemistry and physics workshop students' scores. Nonetheless, workshop participation "leveled the field" as workshop and non-targeted students performed similarly in beginning science courses. Positive impacts of workshop participation on achievement, persistence, efficiency, social integration, and self-confidence support the continued and expanded funding of workshop programs

  16. 2016 FACET-II Science Workshop Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Hogan, Mark J., ed.

    2017-07-19

    The second in a series of FACET-II Science Workshops was held at SLAC National Accelerator Laboratory on October 17-19, 2016 [1]. The workshop drew thirty-five participants from eighteen different institutions including CERN, DESY, Ecole Polytechnique, FNAL, JAI, LBNL, LLNL, Radiabeam, Radiasoft, SLAC, Stony Brook, Strathclyde, Tech-X, Tsinghua, UC Boulder, UCLA and UT Austin. The 2015 workshop [2, 3] helped prioritize research directions for FACET-II. The 2016 workshop was focused on understanding what improvements are needed at the facility to support the next generation of experiments. All presentations are linked to the workshop website as a permanent record.

  17. VLLEEM-2 technical workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    In order to overcome the limits of the energy-environment models, and to benefit at the same time of their past experiences, the VLEEM project proposes a genuine approach and innovative modelling tools to assess the energy-environment systems over the very long term, which are based on the strengths of existing long term energy models, but focussed on two major objectives: to describe normative futures which fit with a set of overall constraints, like the stabilisation of the concentration of green-house gases in the atmosphere, or the stabilisation of the overall inventory of plutonium and minor actinides, etc...; to describe and formalize the association of causalities necessary to bring the system from the present situation to the targeted future, through a '' back-casting '' approach. This first technical workshop presents the state of the art of the different Work Programmes. WP1:Enhancement of the Conceptual framework. WP2: Data base on conventional demand/supply technologies. WP3: Complement and up-date technology monographs. WP4: Formalization and computing of final VLEEM submodels. WP5: Case study 2030, 2050, 2100. (A.L.B.)

  18. Li'l Red Schoolhouse workshops

    Science.gov (United States)

    1993-01-01

    Education specialists at Stennis conduct staff development workshops for elementary and secondary teachers of math, science and technology and other subjects as well as specialized workshops conducted in the NASA Li'l Red Schoolhouse.

  19. DESY: QCD workshop

    International Nuclear Information System (INIS)

    Ingelman, Gunnar

    1994-01-01

    The traditional annual DESY Theory Workshop highlights a topical theory sector. The most recent was under the motto 'Quantum Chromo-Dynamics' - QCD, the field theory of quarks and gluons. The organizers had arranged a programme covering most aspects of current QCD research. This time the workshop was followed by a topical meeting on 'QCD at HERA' to look at the electron-proton scattering experiments now in operation at DESY's new HERA collider

  20. Physics and Astronomy New Faculty Workshops: 20 Years of Workshops and 2000 Faculty

    Science.gov (United States)

    Hilborn, Robert

    Most college and university new faculty members start their teaching careers with almost no formal training in pedagogy. To address this issue, the American Association of Physics Teachers, the American Astronomical Society, and the American Physical Society have been offering since 1996 workshops for physics and astronomy new faculty members (and in recent years for experienced faculty members as well). The workshops introduce faculty members to a variety of interactive engagement teaching (IET) methods and the evidence for their effectiveness, embedded in a framework of general professional development. Currently the workshops engage about 50% of the new tenure-track hires in physics and astronomy. The workshops are quite successful in making the participants aware of IET methods and motivating them to implement them in their classes. However, about 1/3 of the participants stop using IET methods within a year or two. The faculty members cite (a) lack of time and energy to change, (b) content coverage concerns, and (c) difficulty getting students engaged as reasons for their discontinuance. To help overcome these barriers, we have introduced faculty online learning communities (FOLCs). The FOLCs provide peer support and advice through webinars and coaching from more experienced faculty members. Recommendations based on the workshops and the experiences of the participants can enhance the teaching effectiveness of future physics and astronomy faculty members. This work was supported in part by NSF Grant 1431638.

  1. Establishing Ozone Critical Levels II. UNECE Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    Karlsson, Per Erik; Sellden, Gun; Pleijel, Haakan [eds.

    2003-06-01

    This document is the final report from the workshop. It contains the overall summary of the conclusions from the workshop, the reports from the three working groups that were active during the workshop as well as all background papers presented at the workshop.

  2. 75 FR 28051 - Public Workshop: Pieces of Privacy

    Science.gov (United States)

    2010-05-19

    ... DEPARTMENT OF HOMELAND SECURITY Office of the Secretary Public Workshop: Pieces of Privacy AGENCY: Privacy Office, DHS. ACTION: Notice announcing public workshop. SUMMARY: The Department of Homeland Security Privacy Office will host a public workshop, ``Pieces of Privacy.'' DATES: The workshop will be...

  3. Atoms to Ecosystems: A Workshop for Science Journalists

    Science.gov (United States)

    Saltzman, J.; Bowman, C.; Brown, G. E.; Foster, A. L.; Nilsson, A.; Spormann, A. M.

    2006-12-01

    The Stanford Environmental Molecular Environmental Institute (EMSI) hosted a two-day workshop entitled "Atoms to Ecosystems: Effects of Contaminants on Humans & the Environment" for thirteen science journalists in June 2006. Reporters from local newspapers, freelance writers, and writers from university publications learned about the innovative research of four EMSI scientists and discussed the challenges of reporting on cutting-edge research. Through lectures, a lab tour, and discussions, the journalists and scientists had a very positive experience of learning from each other. The main topics were mercury, arsenic, and water, and the different approaches to understanding these important chemicals in our lives. The sessions on measuring the effect of cooking time on the concentration of mercury in ahi tuna and the challenges of creating a paradigm shift about the structure of water in the water community generated the most questions and conversations. Discussions focused on the challenges of reporting new discoveries; details, complexity, and generalities; reluctance and fears of scientists; and deadlines and the "so what?" factor in publishing. Scientists learned about that it is not always the importance of the story, but competition with other stories that can impact whether an editor chooses to publish a story. Press releases are very important, since most journalists don't have time to browse the science journals. Scientists are sometimes reluctant to talk with journalists because the reports often play out one angle, leave out the complexity of the issue, and may cause conflict with other scientists in the field. Journalists were asked to write a one-paragraph nugget at the end of the first day to assess their understanding of workshop material presented and to potentially submit to NSF. One day after the workshop, one participant published her writing sample in an online magazine. Overall, the journalists wrote that they were pleased with the workshop. They

  4. ATLAS TRT 2002 Workshop

    CERN Multimedia

    Capeans, M.

    Starting on 17th May, the ATLAS TRT 2002 Workshop was organised by Ken MacFarlane and his team at Hampton University, Virginia, USA. During a welcome break in the very dense workshop programme, the group enjoyed a half-day long boat trip along the waterways, offering a first-hand look at the history and heritage of this part of America. The attendance during the six-day workshop was about 50 people representing most of the collaborating institutes, although many Russian colleagues had stayed in their institutes to pursue the start-up of end-cap wheel production at PNPI and DUBNA. The meeting clearly showed that, during the year 2002, the TRT community is focusing on final design issues and module/wheel construction, while moving at the same time towards acceptance testing and integration, including the front-end electronics. The two main topics treated at the workshop were the preparation for beginning full production of the FE electronics, and the wire-joint problem that the US barrel colleagues have been fa...

  5. Enhancing student performance in introductory physics in topics related to electricity and magnetism through the use of voluntary workshops

    Science.gov (United States)

    DeSilva, L. Ajith; Pullen, Adam; Hasbun, J. E.

    2018-05-01

    This article examines the effect of voluntary workshops on students’ performance in a university for algebra-based introductory physics on the topics of electricity, magnetism and related areas. A workshop is an optional one-hour-per-week session that promotes a small group’s peer instruction and co-operative learning, in order to enhance the conceptual understanding of physical principles and to improve problem-solving skills. During the workshops, a small group of students were encouraged to exchange ideas in a co-operative learning environment. Most students enrolled were poorly motivated, underprepared, and did not possess the prerequisite mathematics needed. For those who attended workshops, the result of scores on a standardized conceptual survey in electricity and magnetism showed a pre-test-post-test gain of 21% in the number of correct responses. This is to be contrasted with a 5% increase for those students who did not attend workshops. Further, we present a breakdown of the final letter grades obtained by students who attended workshops versus those who did not. Since the introduction of the workshops (out of 374 students), 95% of those who attended made a ‘C’ or better in the course. This compares to only 50% of the students who did not attend workshops and making a ‘C’ or better. The workshops have been offered since the Fall of 2010, but analyzed data includes fourteen years of student letter grades from 2001 to 2014 in order to study the effects on the workshops of the D, F, or W grades (DFW rate). We report a 7% reduction of the DFW rates, which we attribute to the incorporation of the workshops. The workshops are easy to implement and relatively inexpensive, yet appear to be an effective instructional method that enhances the success of underprepared students.

  6. OECD/CSNI Workshop on Best Estimate Methods and Uncertainty Evaluations - Workshop Proceedings

    International Nuclear Information System (INIS)

    2013-01-01

    Best-Estimate Methods plus Uncertainty Evaluation are gaining increased interest in the licensing process. On the other hand, lessons learnt from the BEMUSE (NEA/CSNI/R(2011)3) and SM2A (NEA/CSNI/R(2011)3) benchmarks, progress of UAM benchmark, and answers to the WGAMA questionnaire on the Use of Best-Estimate Methodologies show that improvements of the present methods are necessary and new applications appear. The objective of this workshop is to provide a forum for a wide range of experts to exchange information in the area of best estimate analysis and uncertainty evaluation methods and address issues drawn-up from BEMUSE, UAM and SM2A activities. Both, improvement of existing methods and recent new developments are included. As a result of the workshop development, a set of recommendations, including lines for future activities were proposed. The organisation of the Workshop was divided into three parts: Opening session including key notes from OECD and IAEA representatives, Technical sessions, and a Wrap-up session. All sessions included a debate with participation from the audience constituted by 71 attendees. The workshop consisted of four technical sessions: a) Development achievements of BEPU methods and State of the Art: The objective of this session was to present the different approaches to deal with Best Estimate codes and uncertainties evaluations. A total of six papers were presented. One initial paper summarized the existing methods; the following open papers were focused on specific methods stressing their bases, peculiarities and advantages. As a result of the session a picture of the current State of the Art was obtained. b) International comparative activities: This session reviewed the set of international activities around the subject of BEPU methods benchmarking and development. From each of the activities a description of the objectives, development, main results, conclusions and recommendations (in case it is finalized) was presented. This

  7. Measurement Control Workshop Instructional Materials

    International Nuclear Information System (INIS)

    Gibbs, Philip; Crawford, Cary; McGinnis, Brent

    2014-01-01

    A workshop to teach the essential elements of an effective nuclear materials control and accountability (MC&A) programs are outlined, along with the modes of Instruction, and the roles and responsibilities of participants in the workshop.

  8. Measurement control workshop instructional materials

    Energy Technology Data Exchange (ETDEWEB)

    Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Crawford, Cary [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McGinnis, Brent [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Insolves LLC, Piketon, OH (United States)

    2014-04-01

    A workshop to teach the essential elements of an effective nuclear materials control and accountability (MC&A) programs are outlined, along with the modes of Instruction, and the roles and responsibilities of participants in the workshop.

  9. VMIL 2011 : the 5th Workshop on Virtual Machines and Intermediate Languages

    NARCIS (Netherlands)

    Rajan, Hridesh; Hauptmann, Michael; Bockisch, Christoph; Dyer, Robert

    2011-01-01

    The VMIL workshop is a forum for research in virtual machines and intermediate languages. It is dedicated to identifying programming mechanisms and constructs that are currently realized as code transformations or implemented in libraries but should rather be supported at VM level. Candidates for

  10. Proceedings of the First International Induced Gamma Emission Workshop

    International Nuclear Information System (INIS)

    Popescu, I.I.; Ur, C.A.

    1999-01-01

    The proceedings of the First International Induced Gamma Emission Workshop held on August 16-20, 1997 in Predeal, Romania contain 40 communications. These are bunched in the following 7 sections: 1. Opening session (8 papers); 2. Theory and Modelling (7 papers); 3. Pump Mechanisms (6 papers); 4. Pump Sources (3 papers); 5. Collective Effects (8 papers); 6. Nuclear Isomers (3 papers); 7. Moessbauer Effect (5 papers)

  11. Proceedings of the workshop on radioactivity associated with coal use

    International Nuclear Information System (INIS)

    1981-12-01

    A workshop on radioactivity in coal use was held on September 15 through 17, 1981, under the auspices of the US Department of Energy, Office of Environmental Programs, and the Los Alamos National Laboratory. The purpose of the workshop was to identify research issues associated with radioactivity resulting from the use of coal for electric power generation. The concensus of the 10 scientists participating in the workshop was that a moderate to strong need exists for research in solubility of fly ash in different fluids and for determination of radioactivity in construction materials. Several additional research issues were identified but were given a lower priority. Summaries of each presentation are included. Titles are: some effects of coal combustion on the radiation environment; radionuclides in western coal at Mound; low-level radiation in coals utilized and ashes produced at New York State electric utilities; radioactivity from coal use - where are the problems; chemistry of radionuclides in coal preparation; uranium daughters in natural atmospheric aerosols and coal-fired power plant emissions; possible contributions of coal extraction and utilization to radioactivity contributions in drinking water; and impact on water quality from radionuclides in coal. One paper has been abstracted separately for inclusion in the Energy Data Base

  12. Mechanical behaviour of austenitic stainless steels in inert environment and in hot chloride environment: influence of molybdenum addition

    International Nuclear Information System (INIS)

    Daret, Jacques

    1978-01-01

    This research thesis reports the study of the influence of molybdenum addition. It is based on an experimental method which brings to the fore correlations between mechanical and electrochemical parameters of the phenomenon of stress corrosion cracking of austenitic stainless steels. After having recalled some characteristics of dry corrosion and electrochemical corrosion, presented austenitic stainless steels (mechanical properties such as elastic modulus, yield strength, tensile strength, ultimate elongation, creep behaviour, inter-crystalline and pitting corrosion, stress corrosion cracking behaviour), the author addresses the stress corrosion cracking behaviour of these steels in chloride environment (general characteristics, parameters, proposes theories to explain stress corrosion cracking), reports the study of the influence of molybdenum in these steels, notably on corrosion resistance and on stress corrosion cracking. Experimental method and results are described and discussed: tensile tests and creep tests in inert environment, stress corrosion cracking test in chloride environment with analysis based either on corrosion potential evolution or on sample elongation evolution. Results are notably discussed in terms of crack situation within metal lattice, crack growth rate, and scanning electronic microscopy observations [fr

  13. Indonesian students' participation in an interprofessional learning workshop.

    Science.gov (United States)

    Ernawati, Desak Ketut; Lee, Ya Ping; Hughes, Jeffery

    2015-01-01

    Interprofessional learning activities, such as workshops allow students to learn from, with and about each other. This study assessed the impact on Indonesian health students' attitudes towards interprofessional education (IPE) from participating in a workshop on medication safety. The students attended a two-day IPE workshop on medication safety. Thirty-five (48.6%) students completed pre-/post-workshop surveys using a modified Readiness for Interprofessional Learning Scale (RIPLS) survey. The post-workshop survey also had a series of open-ended questions. Students' responses to each RIPLS statement pre-/post-workshop were compared, whilst their responses to open-ended questions in post-workshop survey were thematically analysed. Students reported positive attitudinal changes on statements of shared learning and teamwork sub-scale (Wilcoxon p value importance of teamwork and communication skills. This study found that learning with other health students through an IPE workshop improved medical, nursing and pharmacy students' attitudes towards the importance of shared learning, teamwork and communication in healthcare service.

  14. TPC workshop summary

    International Nuclear Information System (INIS)

    Nygren, D.R.

    1984-01-01

    The Time Projection Chamber (TPC) concept is now nearly ten years old and, as is evident in this workshop, is still evolving in many directions. From the liquid xenon TPC for double beta decay studies to the impressively large second generation TPC for the LEP experiment ALEPH, the surprising diversity of current applications is apparent. This workshop, the first to concentrate solely on the TPC has provided a most congenial and rewarding occasion for all TPC enthusiasts to share experience, results, and ideas

  15. t4 Workshop Report*

    Science.gov (United States)

    Kleensang, Andre; Maertens, Alexandra; Rosenberg, Michael; Fitzpatrick, Suzanne; Lamb, Justin; Auerbach, Scott; Brennan, Richard; Crofton, Kevin M.; Gordon, Ben; Fornace, Albert J.; Gaido, Kevin; Gerhold, David; Haw, Robin; Henney, Adriano; Ma’ayan, Avi; McBride, Mary; Monti, Stefano; Ochs, Michael F.; Pandey, Akhilesh; Sharan, Roded; Stierum, Rob; Tugendreich, Stuart; Willett, Catherine; Wittwehr, Clemens; Xia, Jianguo; Patton, Geoffrey W.; Arvidson, Kirk; Bouhifd, Mounir; Hogberg, Helena T.; Luechtefeld, Thomas; Smirnova, Lena; Zhao, Liang; Adeleye, Yeyejide; Kanehisa, Minoru; Carmichael, Paul; Andersen, Melvin E.; Hartung, Thomas

    2014-01-01

    Summary Despite wide-spread consensus on the need to transform toxicology and risk assessment in order to keep pace with technological and computational changes that have revolutionized the life sciences, there remains much work to be done to achieve the vision of toxicology based on a mechanistic foundation. A workshop was organized to explore one key aspect of this transformation – the development of Pathways of Toxicity (PoT) as a key tool for hazard identification based on systems biology. Several issues were discussed in depth in the workshop: The first was the challenge of formally defining the concept of a PoT as distinct from, but complementary to, other toxicological pathway concepts such as mode of action (MoA). The workshop came up with a preliminary definition of PoT as “A molecular definition of cellular processes shown to mediate adverse outcomes of toxicants”. It is further recognized that normal physiological pathways exist that maintain homeostasis and these, sufficiently perturbed, can become PoT. Second, the workshop sought to define the adequate public and commercial resources for PoT information, including data, visualization, analyses, tools, and use-cases, as well as the kinds of efforts that will be necessary to enable the creation of such a resource. Third, the workshop explored ways in which systems biology approaches could inform pathway annotation, and which resources are needed and available that can provide relevant PoT information to the diverse user communities. PMID:24127042

  16. Proceedings of the Inheritance Workshop at ECOOP 2002

    DEFF Research Database (Denmark)

    2002-01-01

    The Inheritance Workshop at ECOOP 2002, which took place on Tuesday, 11 June, was the first ECOOP workshop focusing on inheritance after the successful workshops in 1991 and 1992. The workshop was intended as a forum for designers and implementers of object-oriented languages, and for software de...

  17. Sheltered Workshops and Transition: Old Bottles, New Wine?

    Science.gov (United States)

    Coombe, Edmund

    This paper provides a historical overview of sheltered workshops and presents information about service innovations and mission expansion. The first workshop in the United States was the Perkins Institute, opened in 1837 for individuals with visual handicaps. This workshop was typical of "categorical" workshops that were established during this…

  18. Building Community Consensus for Earth Science Literacy Using an Online Workshop (Invited)

    Science.gov (United States)

    Wysession, M. E.; Tuddenham, P.; Taber, J.; Ladue, N.

    2009-12-01

    The Earth Science Literacy Principles, published in the spring of 2009, represented a community consensus about what all Americans should understand about Earth sciences. Central to its creation was a 2-week online workshop that involved participation by 350 Earth scientists and educators. The online workshop, hosted by The College of Exploration, was an excellent medium for incorporating the ideas and concerns of 350 people in near-real time. NSF tasked the Earth Science Literacy Initiative (ESLI) (www.earthscienceliteracy.org) with constructing a set of “Big Ideas” and “Supporting Concepts” that distilled the essential understandings of the GEO-EAR division of NSF. Because of the wide diversity of sub-fields involved (ranging from paleobiology to tectonics), finding a mechanism for incorporating many different views while retaining an organized structure was a challenge. The online workshop turned out to be ideal for this task. Though the 2-week asynchronous workshop was designed to replicate a 2-day in-person workshop, at the drawn-out pace of one hour of requested participation per day, in reality it was much more productive. Many aspects of an in-person workshop were replicated in the the online space. Plenary talks were presented in the main conference room via videos recorded just before or during the 2-week period. The workshop was structured with 150 invited participants and 200 observers. The participants had access to all of the rooms while the observers could see all rooms but could only chat in their own area, the Observation Café. Each breakout room had a moderator who attempted to guide discussion, including suggesting off-topic conversations be moved to the Earth Café. An organizing committee of about a dozen people teleconferenced daily, determining the goals or tasks for the participants for that day. This allowed for a high level of flexibility, with the workshop structure flowing in response to the results up to that point. The first

  19. Ninth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Gudmundsson, J.S. (Stanford Geothermal Program)

    1983-12-15

    The attendance at the Workshop was similar to last year's with 123 registered participants of which 22 represented 8 foreign countries. A record number of technical papers (about 60) were submitted for presentation at the Workshop. The Program Committee, therefore, decided to have several parallel sessions to accommodate most of the papers. This format proved unpopular and will not be repeated. Many of the participants felt that the Workshop lost some of its unique qualities by having parallel sessions. The Workshop has always been held near the middle of December during examination week at Stanford. This timing was reviewed in an open discussion at the Workshop. The Program Committee subsequently decided to move the Workshop to January. The Tenth Workshop will be held on January 22-24, 1985. The theme of the Workshop this year was ''field developments worldwide''. The Program Committee addressed this theme by encouraging participants to submit field development papers, and by inviting several international authorities to give presentations at the Workshop. Field developments in at least twelve countries were reported: China, El Salvador, France, Greece, Iceland, Italy, Japan, Kenya, Mexico, New Zealand, the Philippines, and the United States. There were 58 technical presentations at the Workshop, of which 4 were not made available for publication. Several authors submitted papers not presented at the Workshop. However, these are included in the 60 papers of these Proceedings. The introductory address was given by Ron Toms of the U.S. Department of Energy, and the banquet speaker was A1 Cooper of Chevron Resources Company. An important contribution was made to the Workshop by the chairmen of the technical sessions. Other than Stanford Geothermal Program faculty members, they included: Don White (Field Developments), Bill D'Olier (Hydrothermal Systems), Herman Dykstra (Well Testing), Karsten Pruess (Well Testing), John Counsil

  20. 5th International Workshop on Real-World Wireless Sensor Networks

    CERN Document Server

    Hu, Wen; Ferrari, Federico; Zimmerling, Marco; Mottola, Luca

    2014-01-01

    This edited book presents the results of the 5th Workshop on Real-world Wireless Sensor Networks (REALWSN). The purpose of this workshop  was to bring together researchers and practitioners working in the area of sensor networks, with focus on real-world experiments or deployments of wireless sensor networks. Included were, nonetheless, emerging forms of sensing such as those that leverage smart phones, Internet of Things, RFIDs, and robots. Indeed, when working with real-world experiments or deployments, many new or unforeseen issues may arise: the network environment may be composed of a variety of different technologies, leading to very heterogeneous network structures; software development for large scale networks poses new types of problems; the performance of prototype networks may differ significantly from the deployed system; whereas actual sensor network deployments may need a complex combination of autonomous and manual configuration. Furthermore, results obtained through simulation are typically n...

  1. Characteristics of welding fume aerosol investigated in three Swedish workshops

    International Nuclear Information System (INIS)

    Isaxon, C; Pagels, J; Gudmundsson, A; Bohgard, M; Asbach, C; John, A C; Kuhlbusch, T A J; Karlsson, J E; Kammer, R; Tinnerberg, H; Nielsen, J

    2009-01-01

    Potentially high human exposures to nanometer sized airborne particles occur due to welding and other thermal processes in industrial environments. Detailed field measurements of physical and chemical particle characteristics were performed in three work-shops in Sweden. Measurements were performed both in the plume 5-20 cm above the welding point and in the background air (more than 5 m away from the nearest known particle source). Particle number and mass concentrations were measured on-line. A low pressure impactor was used for size-resolved chemical particle composition. The in-plume measurements generated the chemical signatures for different welding processes. These signatures were then used to identify contributions from various processes to the particle concentrations in different size classes. The background number and mass concentrations increased by more than an order of magnitude during intense activities in the work-shops compared to low activities during breaks.

  2. Characteristics of welding fume aerosol investigated in three Swedish workshops

    Energy Technology Data Exchange (ETDEWEB)

    Isaxon, C; Pagels, J; Gudmundsson, A; Bohgard, M [Division of Ergonomics and Aerosol Technology (EAT), Lund University, Faculty of Engineering, PO Box 118, SE-221 00, Lund (Sweden); Asbach, C; John, A C; Kuhlbusch, T A J [Institute of Energy and Environmental Technology, (IUTA), Duisburg (Germany); Karlsson, J E; Kammer, R; Tinnerberg, H; Nielsen, J [Occupational and Environmental Health, Lund University, University Hospital, Lund (Sweden)

    2009-02-01

    Potentially high human exposures to nanometer sized airborne particles occur due to welding and other thermal processes in industrial environments. Detailed field measurements of physical and chemical particle characteristics were performed in three work-shops in Sweden. Measurements were performed both in the plume 5-20 cm above the welding point and in the background air (more than 5 m away from the nearest known particle source). Particle number and mass concentrations were measured on-line. A low pressure impactor was used for size-resolved chemical particle composition. The in-plume measurements generated the chemical signatures for different welding processes. These signatures were then used to identify contributions from various processes to the particle concentrations in different size classes. The background number and mass concentrations increased by more than an order of magnitude during intense activities in the work-shops compared to low activities during breaks.

  3. The ATLAS Electromagnetic Calorimeter Calibration Workshop

    CERN Multimedia

    Hong Ma; Isabelle Wingerter

    The ATLAS Electromagnetic Calorimeter Calibration Workshop took place at LAPP-Annecy from the 1st to the 3rd of October; 45 people attended the workshop. A detailed program was setup before the workshop. The agenda was organised around very focused presentations where questions were raised to allow arguments to be exchanged and answers to be proposed. The main topics were: Electronics calibration Handling of problematic channels Cluster level corrections for electrons and photons Absolute energy scale Streams for calibration samples Calibration constants processing Learning from commissioning Forty-five people attended the workshop. The workshop was on the whole lively and fruitful. Based on years of experience with test beam analysis and Monte Carlo simulation, and the recent operation of the detector in the commissioning, the methods to calibrate the electromagnetic calorimeter are well known. Some of the procedures are being exercised in the commisssioning, which have demonstrated the c...

  4. Summary of the PSI workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-03-01

    The PSI workshop had been held at JAERI-Naka, from March 15th to 16th, 2002. This workshop is held twice a year as the skull practice session to report the recent progress on the plasma - surface interactions of the experimental reactors such as ITER, JT-60, LHD, etc. and the development of the plasma facing components. There were 34 participants from the university and 18 participants from JAERI and 26 papers were presented. This booklet was published for the purpose of saving a record of this workshop performed in oral lecture form. (author)

  5. Silver nanoparticles in aquatic environments: Physiochemical behavior and antimicrobial mechanisms.

    Science.gov (United States)

    Zhang, Chiqian; Hu, Zhiqiang; Deng, Baolin

    2016-01-01

    Nanosilver (silver nanoparticles or AgNPs) has unique physiochemical properties and strong antimicrobial activities. This paper provides a comprehensive review of the physicochemical behavior (e.g., dissolution and aggregation) and antimicrobial mechanisms of nanosilver in aquatic environments. The inconsistency in calculating the Gibbs free energy of formation of nanosilver [ΔGf(AgNPs)] in aquatic environments highlights the research needed to carefully determine the thermodynamic stability of nanosilver. The dissolutive release of silver ion (Ag(+)) in the literature is often described using a pseudo-first-order kinetics, but the fit is generally poor. This paper proposes a two-stage model that could better predict silver ion release kinetics. The theoretical analysis suggests that nanosilver dissolution could occur under anoxic conditions and that nanosilver may be sulfidized to form silver sulfide (Ag2S) under strict anaerobic conditions, but more investigation with carefully-designed experiments is required to confirm the analysis. Although silver ion release is likely the main antimicrobial mechanism of nanosilver, the contributions of (ion-free) AgNPs and reactive oxygen species (ROS) generation to the overall toxicity of nanosilver must not be neglected. Several research directions are proposed to better understand the dissolution kinetics of nanosilver and its antimicrobial mechanisms under various aquatic environmental conditions. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Urbanist workshops between theory and practice: The importance of spatial and programme reference levels in the planning method

    OpenAIRE

    Gregor Čok

    2013-01-01

    One of the key characteristics of urban-architectural workshops as a soft planning method is above all the fact that the authors are free of burden of formal facts and reference levels of the local environment, which do not influence the concept and the working process. Within this framework, the workshop presents an opportunity for the creator to focus primarily on the core of the problem, and work creatively towards a substantiated professional solution. In addition to the basic ref...

  7. 8th International Workshop on Simulation

    CERN Document Server

    Rasch, Dieter; Melas, Viatcheslav; Moder, Karl; Statistics and simulation

    2018-01-01

    This volume features original contributions and invited review articles on mathematical statistics, statistical simulation and experimental design. The selected peer-reviewed contributions originate from the 8th International Workshop on Simulation held in Vienna in 2015. The book is intended for mathematical statisticians, Ph.D. students and statisticians working in medicine, engineering, pharmacy, psychology, agriculture and other related fields. The International Workshops on Simulation are devoted to statistical techniques in stochastic simulation, data collection, design of scientific experiments and studies representing broad areas of interest. The first 6 workshops took place in St. Petersburg, Russia, in 1994 – 2009 and the 7th workshop was held in Rimini, Italy, in 2013.

  8. Workshop Polli Talu Loomingulises Keskuses

    Index Scriptorium Estoniae

    2004-01-01

    MAP Intermedia Performance Collaboration'i (USA) workshop. Brendan McCall (liikumine), N. B. Aldrich (heli) ja Zach Poff (video) workshop tutvustab kolme kunstniku koostööd. Näidatakse ka multimeedia etendust, mis on külaliskunstnikel valminud Polli talus

  9. IFPA meeting 2009 workshops report

    DEFF Research Database (Denmark)

    Lash, G.E.; Burton, G.J.; Chamley, L.W.

    2010-01-01

    Workshops are an important part of the annual meeting of the International Federation of Placenta Associations (IFPA). At IFPA Meeting 2009 diverse topics were discussed in twelve themed workshops. Topics covered included: immune response to pregnancy; signaling between fetus and placenta...

  10. School Environment Handbook Part I: Overview and Workshop Activities.

    Science.gov (United States)

    Gillespie, Judith; And Others

    This handbook, produced by the School Environmental Impact Program (Indiana) was developed to improve school environments and to create more positive attitudes and behaviors in school participants (all those involved in the school and its environment). It is designed to help in the assessment of school conditions by individuals, groups, or school…

  11. Personal Learning Environments in Black and White

    NARCIS (Netherlands)

    Kalz, Marco

    2010-01-01

    Kalz, M. (2010, 22 January). Personal Learning Environments in Black and White. Presentation provided during the workshop "Informal Learning and the use of social software in veterinary medicine" of the Noviceproject (http://www.noviceproject.eu), Utrecht, The Netherlands.

  12. Final Scientific EFNUDAT Workshop

    CERN Multimedia

    CERN. Geneva

    2010-01-01

    The Final Scientific EFNUDAT Workshop - organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive.EFNUDAT website: http://www.efnudat.euTopics of interest include: Data evaluationCross section measurementsExperimental techniquesUncertainties and covariancesFission propertiesCurrent and future facilities  International Advisory Committee: C. Barreau (CENBG, France)T. Belgya (IKI KFKI, Hungary)E. Gonzalez (CIEMAT, Spain)F. Gunsing (CEA, France)F.-J. Hambsch (IRMM, Belgium)A. Junghans (FZD, Germany)R. Nolte (PTB, Germany)S. Pomp (TSL UU, Sweden) Workshop Organizing Committee: Enrico Chiaveri (Chairman)Marco CalvianiSamuel AndriamonjeEric BerthoumieuxCarlos GuerreroRoberto LositoVasilis Vlachoudis Workshop Assistant: Géraldine Jean

  13. Assessing the interactivity and prescriptiveness of faculty professional development workshops: The real-time professional development observation tool

    Science.gov (United States)

    Olmstead, Alice; Turpen, Chandra

    2016-12-01

    Professional development workshops are one of the primary mechanisms used to help faculty improve their teaching, and draw in many STEM instructors every year. Although workshops serve a critical role in changing instructional practices within our community, we rarely assess workshops through careful consideration of how they engage faculty. Initial evidence suggests that workshop leaders often overlook central tenets of education research that are well established in classroom contexts, such as the role of interactivity in enabling student learning [S. Freeman et al., Proc. Natl. Acad. Sci. U.S.A. 111, 8410 (2014)]. As such, there is a need to develop more robust, evidence-based models of how best to support faculty learning in professional development contexts, and to actively support workshop leaders in relating their design decisions to familiar ideas from other educational contexts. In response to these needs, we have developed an observation tool, the real-time professional development observation tool (R-PDOT), to document the form and focus of faculty engagement during workshops. In this paper, we describe the motivation and methodological considerations behind the development of the R-PDOT, justify our decisions to highlight particular aspects of workshop sessions, and demonstrate how the R-PDOT can be used to analyze three sessions from the Physics and Astronomy New Faculty Workshop. We also justify the accessibility and potential utility of the R-PDOT output as a reflective tool using preliminary data from interviews with workshop leaders, and consider the roles the R-PDOT could play in supporting future research on faculty professional development.

  14. Diagnostic Imaging Workshop

    International Nuclear Information System (INIS)

    Sociedad Argentina de Fisica Medica

    2012-01-01

    The American Association of Physicist in Medicine (AAPM), the International Organization for Medical Physics (IOMP) and the Argentina Society of Medical Physics (SAFIM) was organized the Diagnostic Imaging Workshop 2012, in the city of Buenos Aires, Argentina. This workshop was an oriented training and scientific exchange between professionals and technicians who work in medical physics, especially in the areas of diagnostic imaging, nuclear medicine and radiotherapy, with special emphasis on the use of multimodal imaging for radiation treatment, planning as well of quality assurance associates.

  15. Developing Financial Mechanisms for Long-Term Funding of Biodiversity Conservation

    OpenAIRE

    Jeri Larsen

    1993-01-01

    On March 12, 1992, the Regional Environment Divisions and the Global Environment Facility Administration in the Environment Department sponsored a one-day workshop. Conservation professionals, financial and legal specialists, and Bank operational staff involved with biodiversity, particularly Global Environment Facility (GEF) projects, gathered to discuss trust funds, endowments, and found...

  16. Collider workshop

    International Nuclear Information System (INIS)

    Anon.

    1982-01-01

    The promise of initial results after the start of operations at CERN's SPS proton-antiproton collider and the prospects for high energy hadron collisions at Fermilab (Tevatron) and Brookhaven (ISABELLE) provided a timely impetus for the recent Topical Workshop on Forward Collider Physics', held at Madison, Wisconsin, from 10-12 December. It became the second such workshop to be held, the first having been in 1979 at the College de France, Paris. The 100 or so participants had the chance to hear preliminary results from the UA1, UA4 and UA5 experiments at the CERN SPS collider, together with other new data, including that from proton-antiproton runs at the CERN Intersecting Storage Rings

  17. Quality assurance mechanisms for the unregulated research environment.

    Science.gov (United States)

    Riedl, Denise Hanway; Dunn, Michael K

    2013-10-01

    Discussions on research quality and reproducibility are appearing in the pages of scientific journals with heightened significance and gaining media attention. Many institutions have developed guidelines to address the topic of quality in basic research, but questions remain about how best to implement and monitor compliance. Herein we present quality assurance (QA) mechanisms developed specifically for the unregulated discovery research environment to preempt growing concerns arising in both academia and industry for data-driven applications of biotechnology. Copyright © 2013 Elsevier Ltd. All rights reserved.

  18. A Workshop in Transcultural Nursing.

    Science.gov (United States)

    Stevenson, Thomas B.

    1986-01-01

    Describes an experimental, week-long interdisciplinary (i.e., nursing and anthropology) workshop on the relationship between health and culture conducted by Ohio University, Zanesville, in conjunction with the University of Toronto. Discusses program formulation, objectives, results, and suggestions for future workshops. (LAL)

  19. IFPA meeting 2008 workshops report

    DEFF Research Database (Denmark)

    Lash, G.E.; Ansari, T.; Bischof, P.

    2009-01-01

    Workshops are an important part of the IFPA annual meeting. At the IFPA meeting 2008 diverse topics were discussed in 12 themed workshops. Topics covered included: immunology of placentation; galectins and trophoblast invasion; signaling in implantation and invasion; markers to identify trophoblast...

  20. Presentation Skills Workshops for Nurses.

    Science.gov (United States)

    Kinn, S.; Kenyon, M.

    2002-01-01

    Workshops were held to prepare nurses (n=87) to present results of professional activities. One year after the course, 20 had made oral and 30 written presentations. The workshops increased their confidence and were considered practical, informal, and nonthreatening. (Contains 31 references.) (SK)

  1. Summary of experimental insertions workshop

    International Nuclear Information System (INIS)

    Sandweiss, J.; Month, M.

    1976-01-01

    An ISABELLE workshop of the summer 1976 series, which was held at Brookhaven August 16--20, focused on the design and utilization of the experimental insertions. The goals of the workshop are outlined, and a few general remarks about the results are presented

  2. Action research Toolkit II: The Scenario Workshop

    DEFF Research Database (Denmark)

    Rasmussen, Lauge Baungaard

    2003-01-01

    The article describes the scenario workshop within the action research paradigm. In addtion, the maina phases and the functions of the facilitator and the participants are outlined. Finally,it describes and analyses the experiences of using the scenario workshop in practice.......The article describes the scenario workshop within the action research paradigm. In addtion, the maina phases and the functions of the facilitator and the participants are outlined. Finally,it describes and analyses the experiences of using the scenario workshop in practice....

  3. International Workshop on Diagnostics for ITER

    CERN Document Server

    Gorini, Giuseppe; Sindoni, Elio

    1996-01-01

    This book of proceedings collects the papers presented at the Workshop on Diagnostics for ITER, held at Villa Monastero, Varenna (Italy), from August 28 to September 1, 1995. The Workshop was organised by the International School of Plasma Physics "Piero Caldirola. " Established in 1971, the ISPP has organised over fifty advanced courses and workshops on topics mainly related to plasma physics. In particular, courses and workshops on plasma diagnostics (previously held in 1975, 1978, 1982, 1986, and 1991) can be considered milestones in the history of this institution. Looking back at the proceedings of the previous meetings in Varenna, one can appreciate the rapid progress in the field of plasma diagnostics over the past 20 years. The 1995 workshop was co-organised by the Istituto di Fisica del Plasma of the National Research Council (CNR). In contrast to previous Varenna meetings on diagnostics, which have covered diagnostics in present-day tokamaks and which have had a substantial tutorial component, the 1...

  4. Workshop on Developing Safe Software

    International Nuclear Information System (INIS)

    Lawrence, J.D.

    1994-11-01

    The Workshop on Developing Safe Software was held July 22--23, 1992, at the Hotel del Coronado, San Diego, California. The purpose of the workshop was to have four world experts discuss among themselves software safety issues which are of interest to the US Nuclear Regulatory Commission. These issues concern the development of software systems for use in nuclear power plant protection systems. The workshop comprised four sessions. Wednesday morning, July 22, consisted of presentations from each of the four panel members. On Wednesday afternoon, the panel members went through a list of possible software development techniques and commented on them. The Thursday morning, July 23, session consisted of an extended discussion among the panel members and the observers from the NRC. A final session on Thursday afternoon consisted of a discussion among the NRC observers as to what was learned from the workshop

  5. Workshop on developing safe software

    International Nuclear Information System (INIS)

    Lawrence, J.D.

    1992-01-01

    The Workshop on Developing Safe Software was held July 22--23 at the Hotel del Coronado, San Diego, California. The purpose of the workshop was to have four world experts discuss among themselves software safety issues which are of interest to the U. S. Nuclear Regulatory Commission (NRC). These issues concern the development of software systems for use in nuclear power plant protection systems. The workshop comprised four sessions. Wednesday morning, July 22, consisted of presentations from each of the four panel members. On Wednesday afternoon, the panel members went through a list of possible software development techniques and commented on them. The Thursday morning, July 23, session consisted of an extended discussion among the panel members and the observers from the NRC. A final session on Thursday afternoon consisted of a discussion among the NRC observers as to what was teamed from the workshop

  6. Science Thought and Practices: A Professional Development Workshop on Teaching Scientific Reasoning, Mathematical Modeling and Data Analysis

    Science.gov (United States)

    Robbins, Dennis; Ford, K. E. Saavik

    2018-01-01

    The NSF-supported “AstroCom NYC” program, a collaboration of the City University of New York and the American Museum of Natural History (AMNH), has developed and offers hands-on workshops to undergraduate faculty on teaching science thought and practices. These professional development workshops emphasize a curriculum and pedagogical strategies that uses computers and other digital devices in a laboratory environment to teach students fundamental topics, including: proportional reasoning, control of variables thinking, experimental design, hypothesis testing, reasoning with data, and drawing conclusions from graphical displays. Topics addressed here are rarely taught in-depth during the formal undergraduate years and are frequently learned only after several apprenticeship research experiences. The goal of these workshops is to provide working and future faculty with an interactive experience in science learning and teaching using modern technological tools.

  7. PREFACE: MEM07: The 5th Annual Workshop on Mechanical and Electromagnetic Properties of Composite Superconductors (Princeton, NJ, USA, 21 24 August 2007)

    Science.gov (United States)

    Larbalestier, D. C.; Osamura, K.; Hampshire, D. P.

    2008-05-01

    MEM07 was the 5th international workshop concentrating on the mechanical and electrical properties of composite superconductors, which are the technological conductor forms from which practical superconducting devices are made. Such superconducting conductors respond to important challenges we currently face, especially those concerned with the proper management of the world's energy resources. Superconductivity provides a means to address the challenges in the generation, transmission and distribution, and use of energy. For energy generation, the ITER Fusion Tokomak (now underway in France) provides exciting new challenges for the whole superconductivity community, due to the enormous size and strong fields of the plasma confinement superconducting magnets that will form the largest and most powerful superconducting machine yet built. Significant attention was paid at MEM07 to the modeling, characterization, testing and validation of the high-amperage Nb3Sn cable-in-conduit conductors needed for ITER. As for electric energy industry uses, there was much discussion of both first generation (Bi,Pb)2Sr2Ca2Cu3Ox conductors and the rapidly emerging second generation coated conductors made from YBa2Cu37-x. High-performing, affordable conductors of these materials are vital for large capacity transmission cables, energy storage systems, fault current limiters, generators and motors—many prototypes of which are being pursued in technologically advanced countries. There is a broad consensus that the prototype stage for high-current-high-field superconducting applications is nearing its end and that large scale applications are technologically feasible. However full industrialization of large-scale superconducting technologies in electric utility applications will benefit from continuous improvement in critical current, lower ac loss, higher strength and other vital conductor properties. The establishment of optimal procedures for the system design accompanying scale

  8. Synchronization of workshops, using facilities planning

    Science.gov (United States)

    Zineb, Britel; Abdelghani, Cherkaoui

    2017-08-01

    In this paper, we will present a methodology used for the synchronization of two workshops of a sheet metal department. These two workshops have a supplier-customer relationship. The aim of the study is to synchronise the two workshops as a step towards creating a better material flow, reduced inventory and achieving Just in time and lean production. To achieve this, we used a different set of techniques: SMED, Facilities planning…

  9. Nuclear Energy Innovation Workshops. Executive Summary

    Energy Technology Data Exchange (ETDEWEB)

    Allen, Todd [Idaho National Lab. (INL), Idaho Falls, ID (United States); Jackson, John [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hildebrandt, Phil [Idaho National Lab. (INL), Idaho Falls, ID (United States); Baker, Suzy [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-06-01

    The nuclear energy innovation workshops were organized and conducted by INL on March 2-4, 2015 at the five NUC universities and Boise State University. The output from these workshops is summarized with particular attention to final summaries that were provided by technical leads at each of the workshops. The current revision includes 3-4 punctuation corrections and a correction of the month of release from May to June.

  10. International workshop on multimodal analyses enabling artificial agents in human-machine interaction (workshop summary)

    NARCIS (Netherlands)

    Böck, Ronald; Bonin, Francesca; Campbell, Nick; Poppe, R.W.

    2016-01-01

    In this paper a brief overview of the third workshop on Multimodal Analyses enabling Artificial Agents in Human-Machine Interaction. The paper is focussing on the main aspects intended to be discussed in the workshop reflecting the main scope of the papers presented during the meeting. The MA3HMI

  11. Business environment change and decision making mechanism of nuclear generators

    International Nuclear Information System (INIS)

    Yamashita, Hiroko

    2010-01-01

    Change magnitude of business environment for Japanese nuclear generators is significant. It is rapidly growing in the last several years. There are possibilities that the change might impact to management model of nuclear generators. In the paper, the impact to management model, especially, decision making mechanism of the generators is discussed. (author)

  12. Extended abstracts from the Coastal Habitats in Puget Sound (CHIPS) 2006 Workshop

    Science.gov (United States)

    Gelfenbaum, Guy R.; Fuentes, Tracy L.; Duda, Jeffrey J.; Grossman, Eric E.; Takesue, Renee K.

    2010-01-01

    covered a wide range of ongoing inter-disciplinary research, including studies of sediment geochemistry of aquatic environments, sediment budgets, tracking fish pathways, expansion of invasive forams, beach and nearshore sedimentary environments, using influence diagrams as a decision support tool, forage fish, submarine groundwater, and much, much more.The primary focus within these themes was on developing information on the physical, chemical, and biological processes, as well as the human dimensions, associated with the restoration or rehabilitation of the nearshore environment. The workshop was an excellent opportunity for USGS scientists and collaborators who are working on Puget Sound coastal habitats to present their preliminary findings, discuss upcoming research, and to identify opportunities for interdisciplinary collaboration.A compilation of extended abstracts from workshop participants, this proceedings volume serves as a useful reference for attendees of the workshop and for those unable to attend. Taken together, the abstracts in this report provide a view of the current status of USGS multidisciplinary research on Puget Sound coastal habitats.

  13. 11th International Workshop on Bifurcation and Degradation in Geomaterials dedicated to Hans Muhlhaus

    CERN Document Server

    Papanastasiou, Panos; Pasternak, Elena; Dyskin, Arcady

    2017-01-01

    This book contains the scientific contributions to the 11th International Workshop on Bifurcation and Degradation in Geomaterials (IWBDG) held in Limassol-Cyprus, May 21-25, 2017. The IWBDG series have grown in size and scope, since their inception 30 years ago in Germany, covering more and wider areas of geomaterials and geomechanics research including modern trends. The papers cover a wide range of topics including advances in instabilities, localized and diffuse failure, micromechanical, multiscale phenomena, multiphysics modeling and other related topics. This volume gathers a series of manuscript by brilliant international scholars who work on modern recent advances in experimental, theoretical and numerical methods. The theoretical and applied mechanics are linked successfully with engineering applications in traditional and in emerging fields, such as geomechanics for the energy and the environment. The quality of the contributed papers has benefited from the peer review process by expert referees. Thi...

  14. Next-generation sequencing: a challenge to meet the increasing demand for training workshops in Australia.

    Science.gov (United States)

    Watson-Haigh, Nathan S; Shang, Catherine A; Haimel, Matthias; Kostadima, Myrto; Loos, Remco; Deshpande, Nandan; Duesing, Konsta; Li, Xi; McGrath, Annette; McWilliam, Sean; Michnowicz, Simon; Moolhuijzen, Paula; Quenette, Steve; Revote, Jerico Nico De Leon; Tyagi, Sonika; Schneider, Maria V

    2013-09-01

    The widespread adoption of high-throughput next-generation sequencing (NGS) technology among the Australian life science research community is highlighting an urgent need to up-skill biologists in tools required for handling and analysing their NGS data. There is currently a shortage of cutting-edge bioinformatics training courses in Australia as a consequence of a scarcity of skilled trainers with time and funding to develop and deliver training courses. To address this, a consortium of Australian research organizations, including Bioplatforms Australia, the Commonwealth Scientific and Industrial Research Organisation and the Australian Bioinformatics Network, have been collaborating with EMBL-EBI training team. A group of Australian bioinformaticians attended the train-the-trainer workshop to improve training skills in developing and delivering bioinformatics workshop curriculum. A 2-day NGS workshop was jointly developed to provide hands-on knowledge and understanding of typical NGS data analysis workflows. The road show-style workshop was successfully delivered at five geographically distant venues in Australia using the newly established Australian NeCTAR Research Cloud. We highlight the challenges we had to overcome at different stages from design to delivery, including the establishment of an Australian bioinformatics training network and the computing infrastructure and resource development. A virtual machine image, workshop materials and scripts for configuring a machine with workshop contents have all been made available under a Creative Commons Attribution 3.0 Unported License. This means participants continue to have convenient access to an environment they had become familiar and bioinformatics trainers are able to access and reuse these resources.

  15. AAAI Workshop on Nonmonotonic Reasoning

    OpenAIRE

    Etherington, David

    1985-01-01

    On October 17-19 1984 a workshop on non-monotonic reasoning was held at Mohonk Mountain House, outside New Paltz, New York. The workshop was organized by Raymond Reiter and Bonnie Webber, and was sponsored by the Association for the Advancement of Artificial Intelligence.

  16. Pressurized water reactor simulator. Workshop material

    International Nuclear Information System (INIS)

    2003-01-01

    The International Atomic Energy Agency (IAEA) has established an activity in nuclear reactor simulation computer programs to assist its Member States in education. The objective is to provide, for a variety of advanced reactor types, insight and practice in their operational characteristics and their response to perturbations and accident situations. To achieve this, the IAEA arranges for the development and distribution of simulation programs and educational material and sponsors courses and workshops. The workshops are in two parts: techniques and tools for reactor simulator development; and the use of reactor simulators in education. Workshop material for the first part is covered in the IAEA Training Course Series No. 12, 'Reactor Simulator Development' (2001). Course material for workshops using a WWER- 1000 reactor department simulator from the Moscow Engineering and Physics Institute, the Russian Federation is presented in the IAEA Training Course Series No. 21 'WWER-1000 Reactor Simulator' (2002). Course material for workshops using a boiling water reactor simulator developed for the IAEA by Cassiopeia Technologies Incorporated of Canada (CTI) is presented in the IAEA publication: Training Course Series No.23 'Boiling Water Reactor Simulator' (2003). This report consists of course material for workshops using a pressurized water reactor simulator

  17. Advanced Computational Materials Science: Application to Fusion and Generation IV Fission Reactors (Workshop Report)

    Energy Technology Data Exchange (ETDEWEB)

    Stoller, RE

    2004-07-15

    The ''Workshop on Advanced Computational Materials Science: Application to Fusion and Generation IV Fission Reactors'' was convened to determine the degree to which an increased effort in modeling and simulation could help bridge the gap between the data that is needed to support the implementation of these advanced nuclear technologies and the data that can be obtained in available experimental facilities. The need to develop materials capable of performing in the severe operating environments expected in fusion and fission (Generation IV) reactors represents a significant challenge in materials science. There is a range of potential Gen-IV fission reactor design concepts and each concept has its own unique demands. Improved economic performance is a major goal of the Gen-IV designs. As a result, most designs call for significantly higher operating temperatures than the current generation of LWRs to obtain higher thermal efficiency. In many cases, the desired operating temperatures rule out the use of the structural alloys employed today. The very high operating temperature (up to 1000 C) associated with the NGNP is a prime example of an attractive new system that will require the development of new structural materials. Fusion power plants represent an even greater challenge to structural materials development and application. The operating temperatures, neutron exposure levels and thermo-mechanical stresses are comparable to or greater than those for proposed Gen-IV fission reactors. In addition, the transmutation products created in the structural materials by the high energy neutrons produced in the DT plasma can profoundly influence the microstructural evolution and mechanical behavior of these materials. Although the workshop addressed issues relevant to both Gen-IV and fusion reactor materials, much of the discussion focused on fusion; the same focus is reflected in this report. Most of the physical models and computational methods

  18. Outcomes of a Cross-Disciplinary Concussion Prevention and Diagnosis Workshop Series

    Directory of Open Access Journals (Sweden)

    Patrick Drane

    2018-02-01

    Full Text Available This paper reports the outcomes of a series of two Concussion Research Workshops held in Lowell, MA, USA. The workshop examined the state-of-the-art in concussion research, research challenges and the future directions of research within the following three core topic areas: (A Concussion Prevention Techniques & Technology, (B Concussion Diagnosis, and (C Treatment of Concussions. Concussions are a form of traumatic brain injury caused by an impact and are a growing concern among athletes and those who are involved with sports. Recent years have led to increasing awareness and research related to concussions with limited definitive understanding of the specific mechanism and pathology. Technology is beginning to take on an important role in the prevention, diagnosis and treatment of concussions. Currently, sensors provide data about the impact and the athlete. However, sensors and better protective equipment can enable an effective monitoring and thus protection of athletes. Only when a more definitive understanding of the injury mechanism is achieved, can sensors and protective equipment design contribute to effective monitoring and protection of athletes.

  19. Report on the final BRACElet workshop

    Directory of Open Access Journals (Sweden)

    Tony Clear

    Full Text Available This paper reports on the thirteenth and final BRACElet workshop. In this paper we provide a brief retrospective review of the workshops and the findings that have resulted from this multi-institutional multinational investigation into the teaching and learning of novice programmers. Subsequently we report on the work undertaken during the final workshop and then discuss future avenues for research that have evolved as a result of the BRACElet project.

  20. ONR Ocean Wave Dynamics Workshop

    Science.gov (United States)

    In anticipation of the start (in Fiscal Year 1988) of a new Office of Naval Research (ONR) Accelerated Research Initiative (ARI) on Ocean Surface Wave Dynamics, a workshop was held August 5-7, 1986, at Woods Hole, Mass., to discuss new ideas and directions of research. This new ARI on Ocean Surface Wave Dynamics is a 5-year effort that is organized by the ONR Physical Oceanography Program in cooperation with the ONR Fluid Mechanics Program and the Physical Oceanography Branch at the Naval Ocean Research and Development Activity (NORDA). The central theme is improvement of our understanding of the basic physics and dynamics of surface wave phenomena, with emphasis on the following areas: precise air-sea coupling mechanisms,dynamics of nonlinear wave-wave interaction under realistic environmental conditions,wave breaking and dissipation of energy,interaction between surface waves and upper ocean boundary layer dynamics, andsurface statistical and boundary layer coherent structures.

  1. Report on the second international workshop on residential radon: Workshop proceedings

    International Nuclear Information System (INIS)

    1991-07-01

    As a follow-on to the first International Workshop on Residential Radon Epidemiology held in Alexandria VA, on July 24-26, 1989, a Second Workshop was convened, in Alexandria, VA, July 22-23 1991, also under the auspices of the US Department of Energy and the Commission of European Communities. The Workshop, co-chaired by Jonathan Samet and Jan Stolwijk, was attended by 20 active participants from seven countries representing epidemiologic studies recently completed, currently in progress, or in the last stages of preparation. The studies reported on are being conducted in the United States, Canada, Sweden, the United Kingdom, France, Belgium, Germany and the Peoples' Republic of China. The invited presentations that initiated the Workshop focused on a number of methodological problems that have surfaced in the last few years. Among these were: (1) the difficulties in predicting indoor radon concentrations, based on geologic information, (discussed by Alan Tanner, formerly of the US Geologic Survey); (2) the relationships between indoor radon concentrations and building characteristics (discussed by Richard Sextro, Lawrence Berkeley Laboratory, USA); (3) the approaches to analysis of case-control studies in radon epidemiology (discussed by Sarah Darby, Imperial Cancer Research Fund, UK); (4) statistical approaches to error in measurements and missing data (discussed by Donna Spiegelman, Tufts University, USA); (5) preliminary results of a data pooling effort dealing with several different studies of residential radon epidemiology and the lessons to be drawn from this effort (discussed by Jay Lubin, US National Cancer Institute)

  2. Climate change mitigation in Asia and financing Mechanisms.Proceedings of a Regional Conference

    International Nuclear Information System (INIS)

    Shukla, P.R.; Deo, P.

    1998-12-01

    The three primary objectives of the conference, which was organized by the UNEP Collaborating Centre on Energy and Environment (UCCEE) in conjunction with the Environment Department of the World Bank, at Goa in India from May 4 to 6, 1998, were: 1) to share the GHG mitigation experiences from Asian developing countries; 2) to disseminate the standard methodological approach for mitigation analysis developed by UNEP and its applications in different countries; and 3) assess the role and efficacy of financial mechanisms and to, specifically, seek feedback on the Prototype Carbon Fund proposed by the World Bank. Follwing these objectives, the workshop presentations and discussions were structured in three parts. In the first part, participants from eleven Asian developing countries made presentations that were followed by discussions. The second part included the presentations by the experts from UCCEE, UNFCCC and other invited experts who presented the mitigation methodology and the issues and experiences relating to various co-operative implementation mechanisms. The third part included the presentations by the World Bank representatives on the Prototype Carbon Fund and the discussions on financial mechanisms. (EG)

  3. Physics Analysis Tools Workshop 2007

    CERN Multimedia

    Elizabeth Gallas,

    The ATLAS PAT (Physics Analysis Tools) group evaluates, develops and tests software tools for the analysis of physics data, consistent with the ATLAS analysis and event data models. Following on from earlier PAT workshops in London (2004), Tucson (2005) and Tokyo (2006), this year's workshop was hosted by the University of Bergen in Norway on April 23-28 with more than 60 participants. The workshop brought together PAT developers and users to discuss the available tools with an emphasis on preparing for data taking. At the start of the week, workshop participants, laptops and power converters in-hand, jumped headfirst into tutorials, learning how to become trigger-aware and how to use grid computing resources via the distributed analysis tools Panda and Ganga. The well organised tutorials were well attended and soon the network was humming, providing rapid results to the users and ample feedback to the developers. A mid-week break was provided by a relaxing and enjoyable cruise through the majestic Norwegia...

  4. 2nd Ralf Yorque Workshop

    CERN Document Server

    1985-01-01

    These are the proceedings of the Second R. Yorque Workshop on Resource Management which took place in Ashland, Oregon on July 23-25, 1984. The purpose of the workshop is to provide an informal atmosphere for the discussion of resource assessment and management problems. Each participant presented a one hour morning talk; afternoons were reserved for informal chatting. The workshop was successful in stimulating ideas and interaction. The papers by R. Deriso, R. Hilborn and C. Walters all address the same basic issue, so they are lumped together. Other than that, the order to the papers in this volume was determined in the same fashion as the order of speakers during the workshop -- by random draw. Marc Mangel Department of Mathematics University of California Davis, California June 1985 TABLE OF CONTENTS A General Theory for Fishery Modeling Jon Schnute Data Transformations in Regression Analysis with Applications to Stock-Recruitment Relationships David Ruppert and Raymond J. Carroll ••••••. •�...

  5. Proceedings of the workshop ''Decarbonisation. 100 % renewable energy and more''. A report to document the presentations and discussions during the course of the event

    International Nuclear Information System (INIS)

    Donat, Lena; Duwe, Matthias; Roberts, Ennid

    2016-01-01

    The workshop ''Decarbonisation - 100% Renewable Energy and more'', was held on 9 November 2015 in Berlin, hosted by the German Environment Agency and organised by Ecologic Institute. It offered a valuable opportunity for decision-makers, academia, business and civil society from EU Member States, to exchange ideas and lessons learned on the design and implementation of longterm decarbonisation strategies and discuss how industrialised nations, regions and cities can mitigate greenhouse gas emissions in various economic sectors. Workshop participants, Source: Ecologic Institute. The workshop generated important momentum for raising awareness on the topic and advancing the debate at EU level. This report gives an overview of the key presentations of the workshop and outcomes of the debate, clustered along the following topics: - Introduction: the case for action - National long-term strategies - Experience with implementation of national strategies - Local and regional examples The report's structure follows the internal logic and outline of the workshop agenda. Substituting for the presentations made on the day, it is made up of articles written by the original presenters, which contain the main facts and summarise their key messages. These are complemented by background and conclusions prepared by researchers from Ecologic Institute, the organisation that implemented the workshop on behalf of the German Environment Agency.

  6. Proceedings of the workshop ''Decarbonisation. 100 % renewable energy and more''. A report to document the presentations and discussions during the course of the event

    Energy Technology Data Exchange (ETDEWEB)

    Donat, Lena; Duwe, Matthias; Roberts, Ennid [Ecologic Institut fuer Internationale und Europaeische Umweltpolitik, Berlin (Germany)

    2016-04-15

    The workshop ''Decarbonisation - 100% Renewable Energy and more'', was held on 9 November 2015 in Berlin, hosted by the German Environment Agency and organised by Ecologic Institute. It offered a valuable opportunity for decision-makers, academia, business and civil society from EU Member States, to exchange ideas and lessons learned on the design and implementation of longterm decarbonisation strategies and discuss how industrialised nations, regions and cities can mitigate greenhouse gas emissions in various economic sectors. Workshop participants, Source: Ecologic Institute. The workshop generated important momentum for raising awareness on the topic and advancing the debate at EU level. This report gives an overview of the key presentations of the workshop and outcomes of the debate, clustered along the following topics: - Introduction: the case for action - National long-term strategies - Experience with implementation of national strategies - Local and regional examples The report's structure follows the internal logic and outline of the workshop agenda. Substituting for the presentations made on the day, it is made up of articles written by the original presenters, which contain the main facts and summarise their key messages. These are complemented by background and conclusions prepared by researchers from Ecologic Institute, the organisation that implemented the workshop on behalf of the German Environment Agency.

  7. Dose-dependent transitions in mechanisms of toxicity

    International Nuclear Information System (INIS)

    Slikker, William; Andersen, Melvin E.; Bogdanffy, Matthew S.; Bus, James S.; Cohen, Steven D.; Conolly, Rory B.; David, Raymond M.; Doerrer, Nancy G.; Dorman, David C.; Gaylor, David W.; Hattis, Dale; Rogers, John M.; Woodrow Setzer, R.; Swenberg, James A.; Wallace, Kendall

    2004-01-01

    Scientists and decision makers from all sectors agree that risk assessments should be based on the best available science. Several years ago, the Health and Environmental Sciences Institute (HESI), a global branch of the International Life Sciences Institute (ILSI), identified the need for better scientific understanding of dose-dependent transitions in mechanisms of toxicity as one avenue by which the best and latest science can be integrated into the decision making process. In July 2001, the HESI Project Committee on Dose-Dependent Transitions in Mechanisms of Toxicity established a group of academic, government, and industry scientists to engage in active technical discourse on the issue of dose-dependent transitions in mechanisms of toxicity. Over the next 18 months, case studies were examined. These case studies included acetaminophen, butadiene, ethylene glycol, formaldehyde, manganese, methylene chloride, the peroxisome proliferator-activated receptor, progesterone/hydroxyflutamide, propylene oxide, vinyl acetate, vinyl chloride, vinylidene chloride, and zinc (Slikker, W., Jr., Andersen, M.E., Bogdanffy, M.S., Bus, J.S., Cohen, S.D., Conolly, R.B., David, R.M., Doerrer, N.G., Dorman, D.C., Gaylor, D.W., Hattis, D., Rogers, J.M., Setzer, R.W., Swenberg, J.A., Wallace, K., 2004. Dose-dependent transitions in mechanisms of toxicity: case studies. Toxicol. Appl. Pharmacol. 201(3), 226-294 (this issue)). The HESI Project Committee sponsored two technical workshops in 2003. The first of these workshops took place on February 12-13, 2003, and was co-sponsored by the Agency for Toxic Substances and Disease Registry, the American Chemistry Council, the National Institute of Environmental Health Sciences, the Society of Toxicology, and the U.S. Environmental Protection Agency. Additional support was provided by Health Canada. Invited experts from government, academia, and industry provided scientific perspectives and recommendations at the workshop. The purpose of

  8. Results of a Wildlife Toxicology Workshop held by the Smithsonian Institution ? Identification and prioritization of problem statements

    Science.gov (United States)

    Grim, K.C.; Fairbrother, A.; Monfort, S.; Tan, S.; Rattner, B.A.; Gerould, S.; Beasley, V.; Aguirre, A.; Rowles, T.

    2007-01-01

    On March 13-15, 2007 nearly 50 scientists and administrators from the US and Canada participated in a Smithsonian-sponsored Wildlife Toxicology Workshop. Invitees were from academic, government, conservation and the private organizations and were selected to represent the diverse disciplines that encompass wildlife toxicology. The workshop addressed scientific and policy issues, strengths and weaknesses of current research strategies, interdisciplinary and science-based approaches in the study of complex contaminant issues, mechanisms for disseminating data to policy-makers, and the development of a partner network to meet the challenges facing wildlife toxicology over the next decade. Prior to the meeting, participants were asked to submit issues they deemed to be of highest concern which shaped four thematic groups for discussion: Wildlife Toxicology in Education, Risk Assessment, Multiple Stressors/Complex Mixtures, and Sub-Lethal to Population-Level Effects. From these discussion groups, 18 problem statements were developed and prioritized outlining what were deemed the most important issues to address now and into the future. Along with each problem statement participants developed potential solutions and action steps geared to move each issue forward. The workshop served as a stepping stone for action in the field of wildlife toxicology. These problem statements and the resulting action items are presented to the inter-disciplinary wildlife toxicology community for adoption, and future work and action items in these areas are encouraged. The workshop outcome looks to generate conversation and collaboration that will lead to the development of innovative research, future mechanisms for funding, workshops, working groups, and listserves within the wildlife toxicology community.

  9. Nineteenth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Horne, R.J.; Kruger, P.; Miller, F.G.; Brigham, W.E.; Cook, J.W. (Stanford Geothermal Program)

    1994-01-20

    PREFACE The Nineteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 18-20, 1994. This workshop opened on a sad note because of the death of Prof. Henry J. Ramey, Jr. on November 19, 1993. Hank had been fighting leukemia for a long time and finally lost the battle. Many of the workshop participants were present for the celebration of his life on January 21 at Stanford's Memorial Church. Hank was one of the founders of the Stanford Geothermal Program and the Geothermal Reservoir Engineering Workshop. His energy, kindness, quick wit, and knowledge will long be missed at future workshops. Following the Preface we have included a copy of the Memorial Resolution passed by the Stanford University Senate. There were one hundred and four registered participants. Participants were from ten foreign countries: Costa Rica, England, Iceland, Italy, Japan, Kenya, Mexico, New Zealand, Philippines and Turkey. Workshop papers described the performance of fourteen geothermal fields outside the United States. Roland N. Home opened the meeting and welcomed the visitors to the campus. The key note speaker was J.E. ''Ted'' Mock who gave a presentation about the future of geothermal development. The banquet speaker was Jesus Rivera and he spoke about Energy Sources of Central American Countries. Forty two papers were presented at the Workshop. Technical papers were organized in twelve sessions concerning: sciences, injection, production, modeling, and adsorption. Session chairmen are an important part of the workshop and our thanks go to: John Counsil, Mark Walters, Dave Duchane, David Faulder, Gudmundur Bodvarsson, Jim Lovekin, Joel Renner, and Iraj Ershaghi. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Ted Sumida, and Terri A. Ramey who also produces the Proceedings Volumes for publication. We owe a great deal of thanks to our students who

  10. Workshop on Accelerators for Heavy Ion Fusion: Summary Report of the Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Seidl, P.A.; Barnard, J.J.

    2011-04-29

    The Workshop on Accelerators for Heavy Ion Fusion was held at Lawrence Berkeley National Laboratory May 23-26, 2011. The workshop began with plenary sessions to review the state of the art in HIF (heavy ion fusion), followed by parallel working groups, and concluded with a plenary session to review the results. There were five working groups: IFE (inertial fusion energy) targets, RF approach to HIF, induction accelerator approach to HIF, chamber and driver interface, ion sources and injectors.

  11. Elevated blood lead levels from exposure via a radiator workshop.

    Science.gov (United States)

    Treble, R G; Thompson, T S; Morton, D N

    1998-04-01

    Elevated lead levels were discovered in blood samples collected from family members where both the father and the mother worked in a radiator repair workshop. The father and mother were found to have blood lead levels of 2.0 and 0.5 mumol/L (41.7 and 10.4 micrograms/dL), respectively. The father's blood lead level was just below the Canadian occupational health and safety intervention level (2.5 mumol/L or 52.1 micrograms/dL). The two children had blood lead levels of 1.0 and 0.8 mumol/L (20.8 and 16.7 micrograms/dL), both of which are in excess of the recommended guideline for intervention in the case of children (0.5 mumol/L or 10.4 micrograms/dL). The exposure of the two children was possibly due to a combination of pathways including exposure at the workshop itself during visits and also the transportation of lead-containing dust to the home environment.

  12. Industrial Fuel Flexibility Workshop

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2006-09-01

    On September 28, 2006, in Washington, DC, ITP and Booz Allen Hamilton conducted a fuel flexibility workshop with attendance from various stakeholder groups. Workshop participants included representatives from the petrochemical, refining, food and beverage, steel and metals, pulp and paper, cement and glass manufacturing industries; as well as representatives from industrial boiler manufacturers, technology providers, energy and waste service providers, the federal government and national laboratories, and developers and financiers.

  13. Hydrogen Technology Education Workshop Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    None

    2002-12-01

    This document outlines activities for educating key target audiences, as suggested by workshop participants. Held December 4-5, 2002, the Hydrogen Technology Education Workshop kicked off a new education effort coordinated by the Hydrogen, Fuel Cells, & Infrastructure Technologies Program of the Office of Energy Efficiency and Renewable Energy.

  14. Beta Cell Workshop 2013 Kyoto

    DEFF Research Database (Denmark)

    Heller, R Scott; Madsen, Ole D; Nielsen, Jens Høiriis

    2013-01-01

    The very modern Kyoto International Conference Center provided the site for the 8th workshop on Beta cells on April 23-26, 2013. The preceding workshops were held in Boston, USA (1991); Kyoto, Japan (1994); Helsingør, Denmark (1997); Helsinki, Finland (2003); El Perello, Spain (2006); Peebles...

  15. Dynamic Processes in Biology, Chemistry, and Materials Science: Opportunities for UltraFast Transmission Electron Microscopy - Workshop Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Kabius, Bernd C.; Browning, Nigel D.; Thevuthasan, Suntharampillai; Diehl, Barbara L.; Stach, Eric A.

    2012-07-25

    This report summarizes a 2011 workshop that addressed the potential role of rapid, time-resolved electron microscopy measurements in accelerating the solution of important scientific and technical problems. A series of U.S. Department of Energy (DOE) and National Academy of Science workshops have highlighted the critical role advanced research tools play in addressing scientific challenges relevant to biology, sustainable energy, and technologies that will fuel economic development without degrading our environment. Among the specific capability needs for advancing science and technology are tools that extract more detailed information in realistic environments (in situ or operando) at extreme conditions (pressure and temperature) and as a function of time (dynamic and time-dependent). One of the DOE workshops, Future Science Needs and Opportunities for Electron Scattering: Next Generation Instrumentation and Beyond, specifically addressed the importance of electron-based characterization methods for a wide range of energy-relevant Grand Scientific Challenges. Boosted by the electron optical advancement in the last decade, a diversity of in situ capabilities already is available in many laboratories. The obvious remaining major capability gap in electron microscopy is in the ability to make these direct in situ observations over a broad spectrum of fast (µs) to ultrafast (picosecond [ps] and faster) temporal regimes. In an effort to address current capability gaps, EMSL, the Environmental Molecular Sciences Laboratory, organized an Ultrafast Electron Microscopy Workshop, held June 14-15, 2011, with the primary goal to identify the scientific needs that could be met by creating a facility capable of a strongly improved time resolution with integrated in situ capabilities. The workshop brought together more than 40 leading scientists involved in applying and/or advancing electron microscopy to address important scientific problems of relevance to DOE’s research

  16. The ROS Workshop

    CERN Multimedia

    Francis, D.

    The first week of February saw the taking place of the ReadOut Subsystem (ROS) workshop. The ROS is the subsystem of the Trigger, DAQ & DCS project which receives and buffers data from the detector ReadOut Drivers (RODs). On request it then provides a subset of this buffered data, the so-called Regions of Interest (RoI), to the Level 2 trigger. Using the subsequent Level 2 trigger decision, the ROS either removes the buffered event data from its buffers or sends the full event data to the Event Filter for further processing. The workshop took place over a four-day period at a location in the Jura. The average daily attendance was twenty people, which mainly represented the five main ATLAS institutes currently engaged in this Trigger, DAQ & DCS activity. The aim of the workshop was to bring to an end the current prototyping activities in this area and launch the next, final, phase of prototyping. This new phase of prototyping will build on the successful activities of the previous phase and will focus...

  17. Radiation effects on materials in high-radiation environments

    International Nuclear Information System (INIS)

    Weber, W.J.; Mansur, L.K.; Clinard, F.W. Jr.; Parkin, D.M.

    1991-01-01

    A workshop on Radiation Effects on Materials in High-Radiation Environments was held in Salt Lake City, Utah (USA) from August 13 to 15, 1990 under the auspices of the Division of Materials Sciences, Office of Basic Energy Sciences, US Department of Energy. The workshop focused on ceramics, alloys, and intermetallics and covered research needs and capabilities, recent experimental data, theory, and computer simulations. It was concluded that there is clearly a continuing scientific and technological need for fundamental knowledge on the underlying causes of radiation-induced property changes in materials. Furthermore, the success of many current and emerging nuclear-related technologies critically depend on renewed support for basic radiation-effects research, irradiation facilities, and training of scientists. The highlights of the workshop are reviewed and specific recommendations are made regarding research needs. (orig.)

  18. International Workshop on Linear Colliders 2010

    CERN Multimedia

    CERN. Geneva

    2010-01-01

    IWLC2010 International Workshop on Linear Colliders 2010ECFA-CLIC-ILC joint meeting: Monday 18 October - Friday 22 October 2010Venue: CERN and CICG (International Conference Centre Geneva, Switzerland) This year, the International Workshop on Linear Colliders organized by the European Committee for Future Accelerators (ECFA) will study the physics, detectors and accelerator complex of a linear collider covering both CLIC and ILC options.Contact Workshop Secretariat  IWLC2010 is hosted by CERN

  19. Replacing lecture with peer-led workshops improves student learning.

    Science.gov (United States)

    Preszler, Ralph W

    2009-01-01

    Peer-facilitated workshops enhanced interactivity in our introductory biology course, which led to increased student engagement and learning. A majority of students preferred attending two lectures and a workshop each week over attending three weekly lectures. In the workshops, students worked in small cooperative groups as they solved challenging problems, evaluated case studies, and participated in activities designed to improve their general learning skills. Students in the workshop version of the course scored higher on exam questions recycled from preworkshop semesters. Grades were higher over three workshop semesters in comparison with the seven preworkshop semesters. Although males and females benefited from workshops, there was a larger improvement of grades and increased retention by female students; although underrepresented minority (URM) and non-URM students benefited from workshops, there was a larger improvement of grades by URM students. As well as improving student performance and retention, the addition of interactive workshops also improved the quality of student learning: Student scores on exam questions that required higher-level thinking increased from preworkshop to workshop semesters.

  20. 76 FR 58281 - Magnetic Resonance Imaging Safety; Public Workshop

    Science.gov (United States)

    2011-09-20

    ...] Magnetic Resonance Imaging Safety; Public Workshop AGENCY: Food and Drug Administration, HHS. ACTION... announcing a public workshop entitled: ``Magnetic Resonance Imaging (MRI) Safety Public Workshop.'' The purpose of the public workshop is to discuss factors affecting the safe use of magnetic resonance imaging...

  1. Report on the Imaging Workshop for the Genomes to Life Program, April 16-18, 2002

    Energy Technology Data Exchange (ETDEWEB)

    Colson, STEVEN

    2003-08-04

    This report is a result of the Imaging Workshop for the Genomes to Life (GTL) program held April 16-19, 2002, in Charlotte, North Carolina. The meeting was sponsored by the Office of Biological and Environmental Research and the Office of Advanced Scientific Computing Research of the U.S. Department of Energy's (DOE) Office of Science. The purpose of the workshop was to project a broad vision for future needs and determine the value of imaging to GTL program research. The workshop included four technical sessions with plenary lectures on biology and technology perspectives and technical presentations on needs and approaches as they related to the following areas of the GTL program: (1) Molecular machines (protein complexes); (2) Intracellular and cellular structure, function, and processes; (3) Multicellular: Monoclonal and heterogeneous multicellular systems, cell-cell signaling, and model systems; and (4) Cells in situ and in vivo: Bacteria in the natural environment, microenvironment, and in vivo systems.

  2. Rotational Seismology Workshop of February 2006

    Science.gov (United States)

    Evans, John R.; Cochard, A.; Graizer, Vladimir; Huang, Bor-Shouh; Hudnut, Kenneth W.; Hutt, Charles R.; Igel, H.; Lee, William H.K.; Liu, Chun-Chi; Majewski, Eugeniusz; Nigbor, Robert; Safak, Erdal; Savage, William U.; Schreiber, U.; Teisseyre, Roman; Trifunac, Mihailo; Wassermann, J.; Wu, Chien-Fu

    2007-01-01

    Introduction A successful workshop titled 'Measuring the Rotation Effects of Strong Ground Motion' was held simultaneously in Menlo Park and Pasadena via video conference on 16 February 2006. The purpose of the Workshop and this Report are to summarize existing data and theory and to explore future challenges for rotational seismology, including free-field strong motion, structural strong motion, and teleseismic motions. We also forged a consensus on the plan of work to be pursued by this international group in the near term. At this first workshop were 16 participants in Menlo Park, 13 in Pasadena, and a few on the telephone. It was organized by William H. K. Lee and John R. Evans and chaired by William U. Savage in Menlo Park and by Kenneth W. Hudnut in Pasadena. Its agenda is given in the Appendix. This workshop and efforts in Europe led to the creation of the International Working Group on Rotational Seismology (IWGoRS), an international volunteer group providing forums for exchange of ideas and data as well as hosting a series of Workshops and Special Sessions. IWGoRS created a Web site, backed by an FTP site, for distribution of materials related to rotational seismology. At present, the FTP site contains the 2006 Workshop agenda (also given in the Appendix below) and its PowerPoint presentations, as well as many papers (reasonable-only basis with permission of their authors), a comprehensive citations list, and related information. Eventually, the Web site will become the sole authoritative source for IWGoRS and shared information: http://www.rotational-seismology.org ftp://ehzftp.wr.usgs.gov/jrevans/IWGoRS_FTPsite/ With contributions from various authors during and after the 2006 Workshop, this Report proceeds from the theoretical bases for making rotational measurements (Graizer, Safak, Trifunac) through the available observations (Huang, Lee, Liu, Nigbor), proposed suites of measurements (Hudnut), a discussion of broadband teleseismic rotational

  3. Workshop for Early Career Geoscience Faculty: Providing resources and support for new faculty to succeed

    Science.gov (United States)

    Hill, T. M.; Beane, R. J.; Macdonald, H.; Manduca, C. A.; Tewksbury, B. J.; Allen-King, R. M.; Yuretich, R.; Richardson, R. M.; Ormand, C. J.

    2015-12-01

    A vital strategy to educate future geoscientists is to support faculty at the beginning of their careers, thus catalyzing a career-long impact on the early-career faculty and on their future students. New faculty members are at a pivotal stage in their careers as they step from being research-focused graduate students and post-doctoral scholars, under the guidance of advisors, towards launching independent careers as professors. New faculty commonly, and not unexpectedly, feel overwhelmed as they face challenges to establish themselves in a new environment, prepare new courses, begin new research, and develop a network of support. The workshop for Early Career Geoscience Faculty: Teaching, Research, and Managing Your Career has been offered annually in the U.S. since 1999. The workshop is currently offered through the National Association of Geoscience Teachers On the Cutting Edge professional development program with support from the NSF, AGU and GSA. This five-day workshop, with associated web resources, offers guidance for incorporating evidence-based teaching practices, developing a research program, and managing professional responsibilities in balance with personal lives. The workshop design includes plenary and concurrent sessions, individual consultations, and personalized feedback from workshop participants and leaders. Since 1999, more than 850 U.S. faculty have attended the Early Career Geoscience Faculty workshop. Participants span a wide range of geoscience disciplines, and are in faculty positions at two-year colleges, four-year colleges, comprehensive universities and research universities. The percentages of women (~50%) and underrepresented participants (~8%) are higher than in the general geoscience faculty population. Multiple participants each year are starting positions after receiving all or part of their education outside the U.S. Collectively, participants report that they are better prepared to move forward with their careers as a result of

  4. Geometric Methods in Physics : XXXIII Workshop

    CERN Document Server

    Bieliavsky, Pierre; Odzijewicz, Anatol; Schlichenmaier, Martin; Voronov, Theodore

    2015-01-01

    This book presents a selection of papers based on the XXXIII Białowieża Workshop on Geometric Methods in Physics, 2014. The Białowieża Workshops are among the most important meetings in the field and attract researchers from both mathematics and physics. The articles gathered here are mathematically rigorous and have important physical implications, addressing the application of geometry in classical and quantum physics. Despite their long tradition, the workshops remain at the cutting edge of ongoing research. For the last several years, each Białowieża Workshop has been followed by a School on Geometry and Physics, where advanced lectures for graduate students and young researchers are presented; some of the lectures are reproduced here. The unique atmosphere of the workshop and school is enhanced by its venue, framed by the natural beauty of the Białowieża forest in eastern Poland. The volume will be of interest to researchers and graduate students in mathematical physics, theoretical physics and m...

  5. Geometric Methods in Physics : XXXII Workshop

    CERN Document Server

    Bieliavsky, Pierre; Odesskii, Alexander; Odzijewicz, Anatol; Schlichenmaier, Martin; Voronov, Theodore; Geometric Methods in Physics

    2014-01-01

    The Białowieża Workshops on Geometric Methods in Physics, which are hosted in the unique setting of the Białowieża natural forest in Poland, are among the most important meetings in the field. Every year some 80 to 100 participants from both the mathematics and physics world join to discuss new developments and to exchange ideas. The current volume was produced on the occasion of the 32nd meeting in 2013. It is now becoming a tradition that the Workshop is followed by a School on Geometry and Physics, which consists of advanced lectures for graduate students and young researchers. Selected speakers at the 2013 Workshop were asked to contribute to this book, and their work was supplemented by additional review articles. The selection shows that, despite its now long tradition, the workshop remains at the cutting edge of research. The 2013 Workshop also celebrated the 75th birthday of Daniel Sternheimer, and on this occasion the discussion mainly focused on his contributions to mathematical physics such as ...

  6. Impact of Globalization on Sugarcane Pests, Biodiversity and the Environment: A Review of the 2009 Entomology Workshop

    Science.gov (United States)

    The 7th International Society of Sugar Cane Technologists (ISSCT) Entomology Workshop was held from 20 to 24 April 2009 in San Miguel de Tucumán, Argentina under the theme: “Impact of Globalization on Sugar Cane Pests, Biodiversity and the Environment”. Technical sessions held over three days were g...

  7. A Death Awareness Workshop: Theory, Application, and Results.

    Science.gov (United States)

    Whelan, W. Michael; Warren, William M.

    1980-01-01

    Describes an experimental death awareness workshop based on Kubler-Ross' theory. The effects of the workshop reveal cognitive and emotional changes indicating participants in the workshop to be moving towards an acceptance of death. (Author)

  8. Proceedings of the 1997 oil heat technology conference and workshop

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, R.J.

    1997-09-01

    This report documents the Proceedings of the 1997 Oil Heat Technology Conference and Workshop, held on April 3--4 at Brookhaven National Laboratory (BNL), and sponsored by the US Department of Energy--Office of Building Technologies, State and Community programs (DOE-BTS), in cooperation with the Petroleum Marketers Association of America (PMAA). This Conference is a key technology transfer activity supported by the ongoing Combustion Equipment Technology (Oil-Heat R and D) program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space-conditioning equipment. The objectives of the Conference were to: identify and evaluate the state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely: and foster cooperation among federal and industrial representatives with the common goal of sustained national economic growth and energy security via energy conservation. The 1997 Oil Technology Conference comprised: (a) five plenary sessions devoted to presentations and summations by public and private sector industry representatives from the US, and Canada, and (b) four workshops which focused on mainstream issues in oil-heating technology. This book contains 14 technical papers and four summaries from the workshops. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  9. A Portable Computer Security Workshop

    Science.gov (United States)

    Wagner, Paul J.; Phillips, Andrew T.

    2006-01-01

    We have developed a computer security workshop designed to instruct post-secondary instructors who want to start a course or laboratory exercise sequence in computer security. This workshop has also been used to provide computer security education to IT professionals and students. It is effective in communicating basic computer security principles…

  10. Secondary School Design: Workshop Crafts.

    Science.gov (United States)

    Department of Education and Science, London (England).

    Design features are described for school shop facilities. Some general requirements common to most workshops are discussed; and specific design information is provided for general woodwork, general metalwork, and combined wood and metalwork facilities. The grouping of the workshop crafts and their relation to other parts of the school are also…

  11. Flywheel energy storage workshop

    Energy Technology Data Exchange (ETDEWEB)

    O`Kain, D.; Carmack, J. [comps.

    1995-12-31

    Since the November 1993 Flywheel Workshop, there has been a major surge of interest in Flywheel Energy Storage. Numerous flywheel programs have been funded by the Advanced Research Projects Agency (ARPA), by the Department of Energy (DOE) through the Hybrid Vehicle Program, and by private investment. Several new prototype systems have been built and are being tested. The operational performance characteristics of flywheel energy storage are being recognized as attractive for a number of potential applications. Programs are underway to develop flywheels for cars, buses, boats, trains, satellites, and for electric utility applications such as power quality, uninterruptible power supplies, and load leveling. With the tremendous amount of flywheel activity during the last two years, this workshop should again provide an excellent opportunity for presentation of new information. This workshop is jointly sponsored by ARPA and DOE to provide a review of the status of current flywheel programs and to provide a forum for presentation of new flywheel technology. Technology areas of interest include flywheel applications, flywheel systems, design, materials, fabrication, assembly, safety & containment, ball bearings, magnetic bearings, motor/generators, power electronics, mounting systems, test procedures, and systems integration. Information from the workshop will help guide ARPA & DOE planning for future flywheel programs. This document is comprised of detailed viewgraphs.

  12. Final Technical Report: Electronic Structure Workshop (ES13)

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Shiwei [College of William and Mary, Williamsburg, VA (United States)

    2015-02-26

    The 25th Annual Workshop on Recent Developments in Electronic Structure Methods (ES2013) was successfully held at the College of William & Mary in Williamsburg VA on June 11-14, 2013. The workshop website is at http://es13.wm.edu/ , which contains updated information on the workshop and a permanent archive of the scientific contents. DOE's continued support has been instrumental to the success of the workshop.

  13. Writing for publication: institutional support provides an enabling environment.

    Science.gov (United States)

    Kramer, Beverley; Libhaber, Elena

    2016-04-18

    Due to the excessive service delivery loads in public hospitals supported by academic institutions in developing environments, researchers at these institutions have little time to develop scientific writing skills or to write up their research. It is imperative to expand the writing skills of researchers and train the next generation of health sciences academics in order to disseminate research findings. This study reports on the implementation of approaches for writing and publication and the extent of support to staff suffering from the overload of service delivery and of heavy teaching duties. Workshops in scientific writing and writing retreats were initiated and were offered to all staff. Feedback from participants of the writing skills workshops indicated that the workshops provided an injection of confidence and proficiency. Protected writing time resulted in 132 papers submitted to journals and 95 in preparation from 230 participants of the writing retreats over a two year period. Staff commended the off-site, collegial environment, which also supported future collaboration with new-found colleagues. This enabling environment facilitates not only the development of writing skills per se, but also the dissemination of the generated scientific knowledge. In addition, the training in writing skills of this generation will be of value in the training of future cohorts in countries with similar health care deliverables.

  14. EPA Workshop in Biddeford, Maine June 6-7 will Help Support Community Revitalization through Local Food Enterprises

    Science.gov (United States)

    Technical experts from the U.S. Environmental Protection Agency (EPA) will hold a workshop in Biddeford, Maine on June 6-7, intended to revitalize downtowns, boost the local economy, improve public health, and protect the environment through local food ent

  15. Roles of coastal laboratories in the implementation of the nation`s emerging priorities for research in the coastal zone: Workshop proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Malone, T.C. [ed.] [Maryland Univ., Cambridge, MD (United States). Horn Point Environmental Labs.; Brooks, A.S. [ed.] [Wisconsin Univ., Milwaukee, WI (United States). Center for Great Lakes Studies; Clegg, J.S. [ed.] [California Univ., Bodega Bay, CA (United States). Bodega Marine Lab.] [and others

    1995-12-31

    Rapid growth in the human population and related increases in consumption, depletion of natural resources, and environmental degradation are serious concerns for the quality of life and national security. Global change, biological diversity, and sustainable ecosystems were identified as priority areas of research based on their importance for the advance of the fundamental knowledge needed to manage for a sustainable biosphere. Demographic trends, global climate change, and patterns of contaminant release and transport suggest that the effects of human activity on the environment and on natural resources will be especially pronounced in the coastal zone. This report presents the results of a workshop organized by the National Association of Marine Laboratories (NAML) to evaluate the changing roles of coastal laboratories and to recommend mechanisms by which the community of coastal scientists can more effectively work together and with government agencies in defining priorities and implementing research programs that are responsive to national needs. The workshop is part of an ongoing effort to facilitate more integrated approaches to environmental research and the use of scientific information for the purposes of education and environmental management in the coastal zone.

  16. Summary of the CERN Workshop on Materials for Collimators and Beam Absorbers

    CERN Document Server

    Schmidt, R; Bertarelli, A; Ferrari, A; Weterings, W; Mokhov, N V

    2008-01-01

    The main focus of the workshop was on collimators and beam absorbers for (mainly) High Energy Hadron Accelerators, with the energy stored in the beams far above damage limit. The objective was to better understand the technological limits imposed by mechanisms related to beam impact on materials. The idea to organise this workshop came up during the High Intensity High Brightness Hadron Beams, ICFA-HB2006 in Japan [1]. The workshop was organised 3-5 September 2007 at CERN, with about 60 participants, including 20 from outside CERN. About 30 presentations were given [2]. The event was driven by the LHC challenge, with more than 360 MJoule stored in each proton beam. The entire beam or its fraction will interact with LHC collimators and beam absorbers, and with the LHC beam dump blocks. Collimators and beam absorbers are also of the interest for other labs and accelerators: - CERN: for the CNGS target, for SPS beam absorbers (extraction protection) and collimators for protecting the transfer line between SPS an...

  17. A stress management workshop improves residents' coping skills.

    Science.gov (United States)

    McCue, J D; Sachs, C L

    1991-11-01

    We describe the effectiveness of a stress management workshop designed for physicians. Of the 64 medicine, pediatrics, and medicine-pediatrics residents who agreed to participate in the workshop, the 43 who could be freed from clinical responsibilities constituted the intervention group; the 21 residents who could not be freed from clinical responsibilities were asked to be the nonintervention group. The ESSI Stress Systems Instrument and Maslach Burnout Inventory were administered to control subjects and workshop participants 2 weeks before and 6 weeks after the workshop. The half-day workshops taught management of the stresses of medical practice through: (1) learning and practicing interpersonal skills that increase the availability of social support; (2) prioritization of personal, work, and educational demands; (3) techniques to increase stamina and attend to self-care needs; (4) recognition and avoidance of maladaptive responses; and (5) positive outlook skills. Overall, the ESSI Stress Systems Instrument test scores for the workshop participants improved (+1.27), while the nonintervention group's mean scores declined (-0.65). All 21 individual ESSI Stress Systems Instrument scale items improved for the workshop, compared with eight of 21 items for the nonintervention group. The workshop group improved in the Maslach Burnout Inventory emotional exhaustion scale and deteriorated less than the nonintervention group in the depersonalization scale. We conclude that a modest, inexpensive stress management workshop was received positively, and can lead to significant short-term improvement in stress and burnout test scores for medicine and pediatrics residents.

  18. Buildings energy management program workshop design. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-12-01

    This document describes activities undertaken by Honeywell's Energy Resources Center for design and development of the format, content, and materials that were used in conducting 129 one-day energy management workshops for specific commercial business audiences. The Building Energy Management Workshop Program was part of a National Workshop Program that was intended to increase awareness of energy-related issues and to encourage energy-conservation actions on the part of commercial and industrial sectors. The total effort included executive conferences for chief executive officers and other senior management personnel; industrial energy-conservation workshops directed at plant management and engineering personnel; vanpooling workshops designed to inform and encourage business in implementing a vanpooling program for employees; and the building energy-management workshops specifically developed for managers, owners, and operators of office and retail facilities, restaurants, and supermarkets. The total program spanned nearly two years and reached approximately 2,500 participants from all parts of the U.S. A detailed followup evaluation is still being conducted to determine the impact of this program in terms of conservation action undertaken by workshop participants.

  19. Sixth international wind-diesel workshop

    International Nuclear Information System (INIS)

    1992-01-01

    At a workshop on hybrid wind/diesel power generation systems, papers were presented on international research programs, demonstration projects, wind/diesel deployment strategies and requirements, wind/diesel market development and economics, wind turbine design requirements, and wind/diesel models and analytical tools. Separate abstracts have been prepared for 11 papers from this workshop

  20. Sixth international wind-diesel workshop

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    At a workshop on hybrid wind/diesel power generation systems, papers were presented on international research programs, demonstration projects, wind/diesel deployment strategies and requirements, wind/diesel market development and economics, wind turbine design requirements, and wind/diesel models and analytical tools. Separate abstracts have been prepared for 11 papers from this workshop.

  1. Seeking the Tricorder: Report on Workshops on Advanced Technologies for Life Detection

    Science.gov (United States)

    Reiss-Bubenheim, D.; Boston, P. J.; Partridge, H.; Lindensmith, C.; Nadeau, J. L.

    2017-12-01

    There's great excitement about life prospects on icy fluid-containing moons orbiting our Solar System's gas giant planets, newly discovered planet candidates and continuing long-term interest in possible Mars life. The astrobiology/planetary research communities require advanced technologies to explore and study both Solar System bodies and exoplanets for evidence of life. The Tricorder Workshop, held at Ames Research Center May 19-20, 2017, explored technology topics focused on non-invasive or minimally invasive methods for life detection. The workshop goal was to tease out promising ideas for low TRL concepts for advanced life detection technologies that could be applied to the surface and near-subsurface of Mars and Ocean Worlds (such as Europa and Enceladus) dominated by icy terrain. The workshop technology focus centered on mid-to-far term instrument concepts or other enabling technologies (e.g. robotics, machine learning, etc.) primarily for landed missions, which could detect evidence of extant, extinct and/or "weird" life including the notion of "universal biosignatures". Emphasis was placed on simultaneous and serial sample measurements using a suite of instruments and technological approaches with planetary protection in mind. A follow-on workshop, held July 24 at Caltech, sought to develop a generic flowchart of in situ observations and measurements to provide sufficient information to determine if extant life is present in an environment. The process didn't require participant agreement as to definition of extant life, but instead developed agreement on necessary observations and instruments. The flowchart of measurements was designed to maximize the number of simultaneous observations on a single sample where possible, serializing where necessary, and finally dividing it into parts for the most destructive analyses at the end. Selected concepts from the workshops outlined in this poster provide those technology areas necessary to solicit and develop

  2. Workshop presentations

    International Nuclear Information System (INIS)

    Sanden, Per-Olof; Edland, Anne; Reiersen, Craig; Mullins, Peter; Ingemarsson, Karl-Fredrik; Bouchard, Andre; Watts, Germaine; Johnstone, John; Hollnagel, Erik; Ramberg, Patric; Reiman, Teemu

    2009-01-01

    An important part of the workshop was a series of invited presentations. The presentations were intended to both provide the participants with an understanding of various organisational approaches and activities as well as to stimulate the exchange of ideas during the small group discussion sessions. The presentation subjects ranged from current organisational regulations and licensee activities to new organisational research and the benefits of viewing organisations from a different perspective. There were more than a dozen invited presentations. The initial set of presentations gave the participants an overview of the background, structure, and aims of the workshop. This included a short presentation on the results from the regulatory responses to the pre-workshop survey. Representatives from four countries (Sweden, Canada, Finland, and the United Kingdom) expanded upon their survey responses with detailed presentations on both regulatory and licensee safety-related organisational activities in their countries. There were also presentations on new research concerning how to evaluate safety critical organisations and on a resilience engineering perspective to safety critical organisations. Below is the list of the presentations, the slides of which being available in Appendix 2: 1 - Workshop Welcome (Per-Olof Sanden); 2 - CSNI Working Group on Human and Organisational Factors (Craig Reiersen); 3 - Regulatory expectations on justification of suitability of licensee organisational structures, resources and competencies (Anne Edland); 4 - Justifying the suitability of licensee organisational structures, resources and competencies (Karl-Fredrik Ingemarsson); 5 - Nuclear Organisational Suitability in Canada (Andre Bouchard); 6 - Designing and Resourcing for Safety and Effectiveness (Germaine Watts); 7 - Organisational Suitability - What do you need and how do you know that you've got it? (Craig Reiersen); 8 - Suitability of Organisations - UK Regulator's View (Peter

  3. FCC-ee Physics workshop | 19-21 June 2014

    CERN Multimedia

    2014-01-01

    The 7th FCC-ee/TLEP workshop, the first after the FCC kick-off in February 2014, will be focused on physics and experiments.     It will take place on 19-21 June at CERN in the TH auditorium. The registration is open and the agenda is available on the indico web page: http://indico.cern.ch/event/313708/. You are all cordially invited to attend! This will be the first in a series of workshops that will lead us to the first FCC-ee physics milestone, a document defining the physics landscape and study plans, required for March 2015. More information can be found here. FCC-ee is a high-luminosity Z, W, Higgs and top factory, to be hosted in a 100km tunnel, possibly as the first step towards a 100 TeV pp collider FCC-hh. These two machines are being studied within the FCC design study. High precision, high statistics and a clean environment are the tools available in FCC-ee to shed light on the unknown physics that underlies present mysteries: dark matter, the baryon asymmetry of th...

  4. Exposure of the public and the environment to naturally occurring radioactive materials (NORMs) produced in health centers: workshop

    International Nuclear Information System (INIS)

    2012-01-01

    A workshop was held with the aim of developing the scientific and technical basis of radiological protection and safety. Presentations have included topics such as: radiological accidents in medical practices, criteria, dosimetric methods, medical exposure and radiological characterizations of natural origin [es

  5. PREFACE: Collapse Calderas Workshop

    Science.gov (United States)

    Gottsmann, Jo; Aguirre-Diaz, Gerardo

    2008-10-01

    Caldera-formation is one of the most awe-inspiring and powerful displays of nature's force. Resultant deposits may cover vast areas and significantly alter the immediate topography. Post-collapse activity may include resurgence, unrest, intra-caldera volcanism and potentially the start of a new magmatic cycle, perhaps eventually leading to renewed collapse. Since volcanoes and their eruptions are the surface manifestation of magmatic processes, calderas provide key insights into the generation and evolution of large-volume silicic magma bodies in the Earth's crust. Despite their potentially ferocious nature, calderas play a crucial role in modern society's life. Collapse calderas host essential economic deposits and supply power for many via the exploitation of geothermal reservoirs, and thus receive considerable scientific, economic and industrial attention. Calderas also attract millions of visitors world-wide with their spectacular scenic displays. To build on the outcomes of the 2005 calderas workshop in Tenerife (Spain) and to assess the most recent advances on caldera research, a follow-up meeting was proposed to be held in Mexico in 2008. This abstract volume presents contributions to the 2nd Calderas Workshop held at Hotel Misión La Muralla, Querétaro, Mexico, 19-25 October 2008. The title of the workshop `Reconstructing the evolution of collapse calderas: Magma storage, mobilisation and eruption' set the theme for five days of presentations and discussions, both at the venue as well as during visits to the surrounding calderas of Amealco, Amazcala and Huichapan. The multi-disciplinary workshop was attended by more than 40 scientist from North, Central and South America, Europe, Australia and Asia. Contributions covered five thematic topics: geology, geochemistry/petrology, structural analysis/modelling, geophysics, and hazards. The workshop was generously supported by the International Association of Volcanology and the Chemistry of The Earth's Interior

  6. International Workshop on Mathematical Modeling of Tumor-Immune Dynamics

    CERN Document Server

    Kim, Peter; Mallet, Dann

    2014-01-01

    This collection of papers offers a broad synopsis of state-of-the-art mathematical methods used in modeling the interaction between tumors and the immune system. These papers were presented at the four-day workshop on Mathematical Models of Tumor-Immune System Dynamics held in Sydney, Australia from January 7th to January 10th, 2013. The workshop brought together applied mathematicians, biologists, and clinicians actively working in the field of cancer immunology to share their current research and to increase awareness of the innovative mathematical tools that are applicable to the growing field of cancer immunology. Recent progress in cancer immunology and advances in immunotherapy suggest that the immune system plays a fundamental role in host defense against tumors and could be utilized to prevent or cure cancer. Although theoretical and experimental studies of tumor-immune system dynamics have a long history, there are still many unanswered questions about the mechanisms that govern the interaction betwe...

  7. IAEA INTOR workshop report, groups 2, 5, 7, 9, 10 and 15

    International Nuclear Information System (INIS)

    1980-02-01

    In order to prove scientific feasibility of magnetic confinement fusion, large fusion devices are under construction in several countries (JT-60 in Japan, T-15 in U.S.S.R., TFTR in U.S.A. and JET in EC). International Tokamak Reactor (INTOR) Workshop was organized by the International Atomic Energy Agency (IAEA) to identify roles, objectives and characteristics of the next generation fusion device. This report is a compilation of the home task reports of six groups on INTOR engineering aspects by Japan Atomic Energy Research Institute for workshop sessions 2 and 3 held in 1979. Tasks of the respective groups are group 2: first wall/blanket/shield, group 5: magnetics, group 7: systems integration and structure, group 9: assembly and remote maintenance, group 10: radiation shielding and personnel access, group 15: safety and environment. (author)

  8. Proceedings of DUPIC fuel workshop 97

    International Nuclear Information System (INIS)

    1997-07-01

    The researchers discuss the technical aspects of DUPIC fuel fabrication in the workshop as follows; 1) The DUPIC fuel development program in KAERI 2) AECL's progress in developing the DUPIC fuel fabrication process 3) Mechanical decladding 4) Nonproliferation and safeguards aspects of the DUPIC fuel cycle concept 5) Assessment of DUPIC fuel compatibility with CANDU-6 6) The development of combination software for spent PWR fuel to fabricate the homogeneous DUPIC fuel 7) Thermodynamic properties of the DUPIC fuel and its performance 8) Captural properties of cesium and ruthenium 9) A secondary fuel removal process : Plasma processing 10) Technology development for DUPIC process safeguards

  9. Proceedings of DUPIC fuel workshop 97

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    The researchers discuss the technical aspects of DUPIC fuel fabrication in the workshop as follows; (1) The DUPIC fuel development program in KAERI (2) AECL`s progress in developing the DUPIC fuel fabrication process (3) Mechanical decladding (4) Nonproliferation and safeguards aspects of the DUPIC fuel cycle concept (5) Assessment of DUPIC fuel compatibility with CANDU-6 (6) The development of combination software for spent PWR fuel to fabricate the homogeneous DUPIC fuel (7) Thermodynamic properties of the DUPIC fuel and its performance (8) Captural properties of cesium and ruthenium (9) A secondary fuel removal process : Plasma processing (10) Technology development for DUPIC process safeguards.

  10. Communication as a management task: Energy and environment. Lectures

    International Nuclear Information System (INIS)

    Jung. H.

    1993-01-01

    The energy utilities are working in an area of the community confronted by critical questions. The motto fo the 2nd IZE Communications Day proceedings was: 'Energy and the Environment - Public relations in the area of tension between Ecology and Economy'. It was a meeting of domestic and international business directors, politicians, public-relations specialists and journalists. The main concern of the lectures, discussions, workshops and conversation topics was how communication with the medium could be improved, thus enhancing their image in the press, on the radio and television. Top editors from the leading newspapers have strated and discussed their policy. A workshop case-study showed how readily the credibility and acceptance of the energy and environment sector could be improved through longterm, honest, dialogue-oriented and professional public relations work. (orig./UA) [de

  11. Market as microeconomic environment: Mechanisms and controversy

    Directory of Open Access Journals (Sweden)

    Brkić Ivana

    2017-01-01

    Full Text Available Contemporary microeconomic principles are based on market ideology. The paper presents the description of market mechanisms, as well as interpreted economic realities in their application. Although none of science stream excludes completely the efficiency and presence of other, it is disputed over the dominance of the market or the state within the economic processes. The gap between two doctrines: market self-regulation vs. state interventionism allows us to highlight the advantages and disadvantages of one and the other concept. The symbiosis of these two institutions - market and state - could give good results in the achievement of social goals, creating a welfare society, and thus deal with the problems of today: the degradation of an environment, the economic crisis and social inequality.

  12. Proceedings of the fifth workshop on containment integrity

    Energy Technology Data Exchange (ETDEWEB)

    Parks, M.B.; Hughey, C.E. [eds.] [Sandia National Labs., Albuquerque, NM (United States)

    1992-07-01

    The Fifth Workshop on Containment integrity was held in Washington, DC, on May 12--14, 1992. The purpose of these workshops is to provide an international forum for the exchange of information on performance of containments in nuclear power plants under severe accident loadings. Severe accident investigations of existing containment designs as well as future advanced containments were presented during the workshop. There were 145 participants at the workshop from 15 countries. Individual papers have been cataloged separately.

  13. Creative poetry workshop as a means to develop creativity and provide psychological security of a teacher

    Directory of Open Access Journals (Sweden)

    N.T. Oganesyan

    2013-07-01

    Full Text Available A creative approach to the implementation of the Federal state standard of general education implies a supportive psychologically safe learning environment, professional readiness of educators to teaching, expressed in creativity, emotional stability, as well as reflection. The teachers’ creativity and psychological stability level can be improved by the use of certain forms of work: training and creative poetry workshops. The results of the author's research suggest that participation in the poetry workshops stimulates reflection, increases stress resistance and creativity of teachers. Our approach allows us to consider the problem of stimulating the development of teachers’ personality as members of creative poetic process in theoretical and practice oriented perspective.

  14. Looking at biological community level to improve ecotoxicological assessment of freshwater sediments: report on a first French-Swiss workshop.

    Science.gov (United States)

    Pesce, Stéphane; Perceval, Olivier; Bonnineau, Chloé; Casado-Martinez, Carmen; Dabrin, Aymeric; Lyautey, Emilie; Naffrechoux, Emmanuel; Ferrari, Benoit J D

    2018-01-01

    The first French-Swiss workshop on ecotoxicology of freshwater sediment communities was co-organized by the French Research Institute of Science and Technology for Environment and Agriculture (Irstea) and the Swiss Centre for Applied Ecotoxicology (Ecotox Centre EAWAG-EPFL) in Villié-Morgon (Beaujolais Region, France) on April 27-28, 2017. The workshop brought together scientists working in different fields of expertise (ecotoxicologists, ecologists, environmental chemists…), environmental stakeholder groups and managers, as well as economic players (start-ups and consultancies) to better connect research needs of potential end-users with research outputs. The objectives of this workshop were (i) to establish the state of the art of research in the characterization of sediment contamination and in the evaluation of the effects on sediment-associated biological communities and ecosystem functioning and (ii) to give an overview of the French and Swiss regulations dealing with the assessment of contaminated sediments in freshwater ecosystems. The ultimate goal was to collectively identify research needs and knowledge gaps, as well as to highlight ways to improve the ecotoxicological assessment of sediments in freshwater environments by further considering the structure and functions of associated microbial and invertebrate communities.

  15. Workshop on the role of natural analogs in geologic disposal of high-level nuclear waste: Proceedings

    International Nuclear Information System (INIS)

    Kovach, L.A.; Murphy, W.M.

    1995-09-01

    A Workshop on the Role of Natural Analogs in Geologic Disposal of High-Level Nuclear Waste was held in San Antonio, Texas on July 22--25, 1991. The proceedings comprise seventeen papers submitted by participants at the workshop. A series of papers addresses the relation of natural analog studies to the regulation, performance assessment, and licensing of a geologic repository. Applications of reasoning by analogy are illustrated in papers on the role of natural analogs in studies of earthquakes, petroleum, and mineral exploration. A summary is provided of a recently completed, internationally coordinated natural analog study at Pocos de Caldas, Brazil. Papers also cover problems and applications of natural analog studies in four technical areas of nuclear waste management-. waste form and waste package, near-field processes and environment, far-field processes and environment, and volcanism and tectonics. Summaries of working group deliberations in these four technical areas provide reviews and proposals for natural analog applications. Individual papers have been cataloged separately

  16. Workshop on the role of natural analogs in geologic disposal of high-level nuclear waste: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Kovach, L.A. [ed.] [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Regulatory Applications; Murphy, W.M. [ed.] [Southwest Research Inst., San Antonio, TX (United States). Center for Nuclear Waste Regulatory Analyses

    1995-09-01

    A Workshop on the Role of Natural Analogs in Geologic Disposal of High-Level Nuclear Waste was held in San Antonio, Texas on July 22--25, 1991. The proceedings comprise seventeen papers submitted by participants at the workshop. A series of papers addresses the relation of natural analog studies to the regulation, performance assessment, and licensing of a geologic repository. Applications of reasoning by analogy are illustrated in papers on the role of natural analogs in studies of earthquakes, petroleum, and mineral exploration. A summary is provided of a recently completed, internationally coordinated natural analog study at Pocos de Caldas, Brazil. Papers also cover problems and applications of natural analog studies in four technical areas of nuclear waste management-. waste form and waste package, near-field processes and environment, far-field processes and environment, and volcanism and tectonics. Summaries of working group deliberations in these four technical areas provide reviews and proposals for natural analog applications. Individual papers have been cataloged separately.

  17. Precision mechanisms for optics in a vacuum cryogenic environment

    Science.gov (United States)

    Navarro, R.; Elswijk, E.; Tromp, N.; Kragt, J.; Kroes, G.; Hanenburg, H.; de Haan, M.; Schuil, M.; Teuwen, M.; Janssen, H.; Venema, L.

    2017-11-01

    To achieve superb stability in cryogenic optical systems, NOVA-ASTRON generally designs optical instruments on the basis of a 'no adjustments' philosophy. This means that in principle no corrections are possible after assembly. The alignment precision and consequently the performance of the instrument is guaranteed from the design, the tolerance analysis and the detailed knowledge of the material behavior and manufacturing process. This resulted in a higher degree of integrated optomechanical-cryogenic design with fewer parts, but with a higher part complexity. The 'no adjustments' strategy is successful because in the end the risk on instrument performance and project delays is much reduced. Astronomical instrument specifications have become more challenging over the years. Recent designs of the European Southern Observatory Very Large Telescope Interferometer (ESO VLTI) 4 Telescope combiner MATISSE include hundreds of optical components in a cryogenic environment. Despite the large number of optical components the alignment accuracy and stability requirements are in the order of nanometers. The 'no adjustments' philosophy would be too costly in this case, because all components would need to meet extremely tight manufacturing specifications. These specifications can be relaxed dramatically if cryogenic mechanisms are used for alignment. Several mechanisms have been developed: a tip-tilt mirror mechanism, an optical path distance mechanism, a slider mechanism, a bistable cryogenic shutter and a mirror mounting clip. Key aspects of these mechanisms are that the optical element and mechanism are combined in a compact single component, driven by e.g. self braking piezo actuators in order to hold position without power. The design, realization and test results of several mechanisms are presented in this paper.

  18. PS2004 Light-harvesting Systems Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Blankenship, Robert E.

    2005-01-01

    This special issue of the international scientific research journal Photosynthesis Research consists of 25 original peer-reviewed contributions from participants in the PS 2004 Lisht-Harvesting Systems Workshop. This workshop was held from 26-29, 2004 at Hotel Le Chantecler, Sainte-Adele, Quebec, Canada. The workshop was a satellite meeting of the XIII International Congress on Photosynthesis held August 29-September 3, 2004 in Montreal, Canada. The workshope dealt with all types of photosynthetic antenna systems and types of organisms, including anoxygenic photosynthetic bacteria, cyanobacteria, algae and higher plants, as well as in vitro studies of isolated pigments. This collection of papers is a good representation of the highly interdisciplinary nature of modern research on photosynthetic antenna complexes, utilizing techniques of advanced spectroscopy, biochemistry, molecular biology, synthetic chemistry and structural determination to understand these diverse and elegant molecular complexes.

  19. Biocorrosion rate and mechanism of metallic magnesium in model arterial environments

    Science.gov (United States)

    Bowen, Patrick K.

    A new paradigm in biomedical engineering calls for biologically active implants that are absorbed by the body over time. One popular application for this concept is in the engineering of endovascular stents that are delivered concurrently with balloon angioplasty. These devices enable the injured vessels to remain patent during healing, but are not needed for more than a few months after the procedure. Early studies of iron- and magnesium-based stents have concluded that magnesium is a potentially suitable base material for such a device; alloys can achieve acceptable mechanical properties and do not seem to harm the artery during degradation. Research done up to the onset of research contained in this dissertation, for the most part, failed to define realistic physiological corrosion mechanisms, and failed to correlate degradation rates between in vitro and in vivo environments. Six previously published works form the basis of this dissertation. The topics of these papers include (1) a method by which tensile testing may be applied to evaluate biomaterial degradation; (2) a suite of approaches that can be used to screen candidate absorbable magnesium biomaterials; (3) in vivo-in vitro environmental correlations based on mechanical behavior; (4) a similar correlation on the basis of penetration rate; (5) a mid-to-late stage physiological corrosion mechanism for magnesium in an arterial environment; and (6) the identification of corrosion products in degradable magnesium using transmission electron microscopy.

  20. Proceedings of the 6th US/German Workshop on Salt Repository Research, Design, and Operation

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Francis D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Steininger, Walter [Karlsruhe Inst. of Technology (KIT) (Germany); Bollingerfehr, Wilhelm [DBE Technology GmbH, Peine (Germany)

    2016-01-11

    The 6th US/German Workshop on Salt Repository Research, Design, and Operation was held in Dresden. Germany on September 7-9, 2015. Over seventy participants helped advance the technical basis for salt disposal of radioactive waste. The number of collaborative efforts continues to grow and to produce useful documentation, as well as to define the state of the art for research areas. These Proceedings are divided into Chapters, and a list of authors is included in the Acknowledgement Section. Also in this document are the Technical Agenda, List of Participants, Biographical Information, Abstracts, and Presentations. Proceedings of all workshops and other pertinent information are posted on websites hosted by Sandia National Laboratories and the Nuclear Energy Agency Salt Club. The US/German workshops provide continuity for long-term research, summarize and publish status of mature areas, and develop appropriate research by consensus in a workshop environment. As before, major areas and findings are highlighted, which constitute topical Chapters in these Proceedings. In total, the scientific breadth is substantial and while not all subject matter is elaborated into chapter format, all presentations and abstracts are published in this document. In the following Proceedings, six selected topics are developed in detail.

  1. Non-perturbative solution of a quantum mechanical oscillator interacting with a specific environment

    International Nuclear Information System (INIS)

    Badralexe, E.; Gupta, R.K.; Scheid, W.

    1984-01-01

    A quantum mechanical model of an oscillator interacting linearly with an environment is treated by the method of perturbation series expansion. For a special class of environments and interactions, the series is summed up to all orders. An integral equation for the time dependence of the coordinate operator of the oscillator is obtained, which is solved analytically by the method of Laplace transformations. General conditions are stated for a dissipative behaviour of the special class of environments considered. An example, which is widely applicable, is discussed. (author)

  2. The Cytoskeleton: Mechanical, Physical, and Biological Interactions

    Science.gov (United States)

    1996-01-01

    This workshop, entitled "The Cytoskeleton: Mechanical, Physical, and Biological Interactions," was sponsored by the Center for Advanced Studies in the Space Life Sciences at the Marine Biological Laboratory. This Center was established through a cooperative agreement between the MBL and the Life Sciences Division of the National Aeronautics and Space Administration. To achieve these goals, the Center sponsors a series of workshops on various topics in the life sciences. Elements of the cytoskeleton have been implicated in the effects of gravity on the growth of plants fungi. An intriguing finding in this regard is the report indicating that an integrin-like protein may be the gravireceptor in the internodal cells of Chara. Involvement of the cytoskeleton in cellular graviperception of the basidiomycete Flammulina velutipes has also been reported. Although the responses of mammalian cells to gravity are not well documented, it has been proposed that integrins can act as mechanochemical transducers in mammalian cells. Little is known about the integrated mechanical and physical properties of cytoplasm, this workshop would be the best place to begin developing interdisciplinary approaches to the effects of mechanical stresses on cells and their most likely responsive cytoplasmic elements- the fibrous proteins comprising the cytoskeleton.

  3. Connecting with the Arts: A Workshop for Middle Grades Teachers

    Science.gov (United States)

    Annenberg Media, 2005

    2005-01-01

    "Connecting with the Arts: A Workshop for Middle Grades Teachers" is a video workshop for middle school teachers of the arts and other subjects. The workshop includes eight hour-long video programs and a companion workshop guide and Web site. The workshop shows middle school teachers why and how to integrate the arts (dance, music, theatre, and…

  4. Influence Of Extension Education Workshop On Cabbage Growers ...

    African Journals Online (AJOL)

    Influence Of Extension Education Workshop On Cabbage Growers Awareness And Knowledge Of Ipm In Aghtapeh Town, Iran. ... A survey was conducted among 60 farmers in Karaj County that included 30 workshop participants, and 30 randomly selected farmers. The study found that workshop participants had ...

  5. Proceedings of 6th International Microbeam Workshop/12th L.H. Gray Workshop Microbeam Probes of Cellular Radiation Response

    International Nuclear Information System (INIS)

    Prise, Kevin M.

    2004-01-01

    The extended abstracts which are submitted here present a summary of the proceedings of the 6th International Workshop/12th LH Gray Workshop: Microbeam Probes of Cellular Radiation Response, held at St. Catherine's College, University of Oxford, UK on March, 29th-31st, 2003. In 1993 the 4th LH Gray Workshop entitled ''Microbeam Probes of Cellular Radiation Response'' was held at the Gray Cancer Institute in Northwood. This was organized by Prof BD Michael, Dr M. Folkard and Dr KM Prise and brought together 40 participants interested in developing and applying new microbeam technology to problems in radiation biology (1). The workshop was an undoubted success and has spawned a series of subsequent workshops every two years. In the past, these workshops have been highly successful in bringing together groups interested in developing and applying micro-irradiation techniques to the study of cell and tissue damage by ionizing radiations. Following the first microbeam workshop, there has been a rapid growth in the number of centres developing radiobiology microbeams, or planning to do so and there are currently 15-20 worldwide. Much of the recent research using microbeams has used them to study low-dose effects and ''non-targeted'' responses such bystander effects, genomic instability and adaptive responses. The goal of the 6th workshop was to build on our knowledge of the development of microbeam approaches and the application to radiation biology in the future with the meeting stretching over a 3 day period. Over 80 participants reviewed the current state of radiobiology microbeam research worldwide and reported on new technological developments both in the fields of physics and biology

  6. 2nd German-Japanese Workshop on Digital Signatures 1999: ATR (Advanced Telecommunications Research Institute International), Kyoto, 21st/22nd of September, 1999

    OpenAIRE

    Thielmann, H.; Mennicken, J.-B.

    2000-01-01

    This report contains the proceedings of a second German-Japanese Workshop on digital signatures held in Kyoto, September 21./22. 1999. The workshop aimed at legal, technical and economic aspects of digital signatures as a means to promote electronic commerce. Special attention was devoted to Identification and classification of requirements on the technical platform and requirements for international interoperability, Identification of legal requirements and other social environments that nee...

  7. Proceedings of the geosciences workshop

    Energy Technology Data Exchange (ETDEWEB)

    None

    1991-01-01

    The manuscripts in these proceedings represent current understanding of geologic issues associated with the Weldon Spring Site Remedial Action Project (WSSRAP). The Weldon Spring site is in St. Charles County, Missouri. The proceedings are the record of the information presented during the WSSRAP Geosciences Workshop conducted on February 21, 1991. The objective of the workshop and proceedings is to provide the public and scientific community with technical information that will facilitate a common understanding of the geology of the Weldon Spring site, of the studies that have been and will be conducted, and of the issues associated with current and planned activities at the site. This coverage of geologic topics is part of the US Department of Energy overall program to keep the public fully informed of the status of the project and to address public concerns as we clean up the site and work toward the eventual release of the property for use by this and future generations. Papers in these proceedings detail the geology and hydrology of the site. The mission of the WSSRAP derives from the US Department of Energy's Surplus Facilities Management Program. The WSSRAP will eliminate potential hazards to the public and the environment and make surplus real property available for other uses to the extent possible. This will be accomplished by conducting remedial actions which will place the quarry, the raffinate pits, the chemical plant, and the vicinity properties in a radiologically and chemically safe condition. The individual papers have been catalogued separately.

  8. A pilot study on occupational dynamics in the mechanical workshops and process plants of DAE organizations

    International Nuclear Information System (INIS)

    Basu, Jisnu

    2009-01-01

    There is an increasing interest on human factors with regard to safety management, particularly in specialized fields like in the nuclear research centers where one-size-fits-all approach may not be suitable as safety solutions. Safety failures occur due to maladjustment of human psychological and physiological functioning. The Demand-Control-Support model of psychological job stress is one of the popular methods for analyzing the factors related to occupational health. Job content questionnaires (JCQ) developed by Robert Karasek is a simple but effective tool to measure the psychological job demand, job control and support parameters. We have studied these psychological factors for technical staffs during the transitional period of technology upgradation in mechanical workshops and process plants at Variable Energy Cyclotron Centre (VECC) and Saha Institute of Nuclear Physics (SINP), Kolkata. In the present study the results of psychological demand etc. obtained from the survey at VECC and SINP are compared with the U.S. national scale. Some 'umbrella questions' have been added with the core questionnaires of JCQ to normalize it as per Indian realities. The Hindi version of JCQ was issued to the subjects for self assessment. A new scale, 'Psychosocial productivity' has been introduced to directly measure the stress free output capacity of a workstation. (author)

  9. Emerging methods and tools for environmental risk assessment, decision-making, and policy for nanomaterials: summary of NATO Advanced Research Workshop

    DEFF Research Database (Denmark)

    Linkov, I; Steevens, J; Adlakha-Hutcheon, G

    2009-01-01

    and the environment. A unique feature of this workshop was its interdisciplinary nature and focus on the practical needs of policy decision makers. Workshop presentations and discussion panels were structured along four main themes: technology and benefits, human health risk, environmental risk, and policy......Nanomaterials and their associated technologies hold promising opportunities for the development of new materials and applications in a wide variety of disciplines, including medicine, environmental remediation, waste treatment, and energy conservation. However, current information regarding...... the environmental effects and health risks associated with nanomaterials is limited and sometimes contradictory. This article summarizes the conclusions of a 2008 NATO workshop designed to evaluate the wide-scale implications (e.g., benefits, risks, and costs) of the use of nanomaterials on human health...

  10. CHDS Sponsors Critical Infrastructure Protection Workshop

    OpenAIRE

    Center for Homeland Defense and Security

    2008-01-01

    Center for Homeland Defense and Security, PRESS RELEASES The NPS Center for Homeland Defense and Security in partnership with the U.S. Department of Homeland Security recently hosted its first Critical Infrastructure Protection Workshop. The workshop brought together practitioners and...

  11. Workshops around the pillar system design computer program produced in SIMRAC project GAP334

    CSIR Research Space (South Africa)

    York, G

    2000-03-01

    Full Text Available with the actual Pillar System Design program. Four workshops were held, three in the Bushveld Complex, and one at the Conference Centre at CSIR Miningtek. The delegates comprised most of the industry rock mechanics practitioners who deal with pillar system design...

  12. High-Penetration Photovoltaics Standards and Codes Workshop, Denver, Colorado, May 20, 2010: Workshop Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Coddington, M.; Kroposki, B.; Basso, T.; Lynn, K.; Herig, C.; Bower, W.

    2010-09-01

    Effectively interconnecting high-level penetration of photovoltaic (PV) systems requires careful technical attention to ensuring compatibility with electric power systems. Standards, codes, and implementation have been cited as major impediments to widespread use of PV within electric power systems. On May 20, 2010, in Denver, Colorado, the National Renewable Energy Laboratory, in conjunction with the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE), held a workshop to examine the key technical issues and barriers associated with high PV penetration levels with an emphasis on codes and standards. This workshop included building upon results of the High Penetration of Photovoltaic (PV) Systems into the Distribution Grid workshop held in Ontario California on February 24-25, 2009, and upon the stimulating presentations of the diverse stakeholder presentations.

  13. Workshop I: Gender Studies

    Science.gov (United States)

    Hennessey, Eden; Kurup, Anitha; Meza-Montes, Lilia; Shastri, Prajval; Ghose, Shohini

    2015-12-01

    Participants in the Gender Studies workshop of the 5th IUPAP International Conference on Women in Physics discussed the gender question in science practice from a policy perspective, informed by investigations from the social science disciplines. The workshop's three sessions—"Equity and Education: Examining Gender Stigma in Science," "A Comparative Study of Women Scientists and Engineers: Experiences in India and the US," and "Toward Gender Equity Through Policy: Characterizing the Social Impact of Interventions—are summarized, and the resulting recommendations presented.

  14. Radiation effects in the environment

    Energy Technology Data Exchange (ETDEWEB)

    Begay, F.; Rosen, L.; Petersen, D.F.; Mason, C.; Travis, B. [Los Alamos National Lab., NM (United States); Yazzie, A. [Navajo Nation, Window Rock, AZ (United States). Dept. of History; Isaac, M.C.P.; Seaborg, G.T. [Lawrence Berkeley National Lab., CA (United States); Leavitt, C.P. [Univ. of New Mexico, Albuquerque, NM (United States). Dept. of Physics and Astronomy

    1999-04-01

    Although the Navajo possess substantial resource wealth-coal, gas, uranium, water-this potential wealth has been translated into limited permanent economic or political power. In fact, wealth or potential for wealth has often made the Navajo the victims of more powerful interests greedy for the assets under limited Navajo control. The primary focus for this education workshop on the radiation effects in the environment is to provide a forum where scientists from the nuclear science and technology community can share their knowledge toward the advancement and diffusion of nuclear science and technology issues for the Navajo public. The scientists will make an attempt to consider the following basic questions; what is science; what is mathematics; what is nuclear radiation? Seven papers are included in this report: Navajo view of radiation; Nuclear energy, national security and international stability; ABC`s of nuclear science; Nuclear medicine: 100 years in the making; Radon in the environment; Bicarbonate leaching of uranium; and Computational methods for subsurface flow and transport. The proceedings of this workshop will be used as a valuable reference materials in future workshops and K-14 classrooms in Navajo communities that need to improve basic understanding of nuclear science and technology issues. Results of the Begay-Stevens research has revealed the existence of strange and mysterious concepts in the Navajo Language of nature. With these research results Begay and Stevens prepared a lecture entitled The Physics of Laser Fusion in the Navajo language. This lecture has been delivered in numerous Navajo schools, and in universities and colleges in the US, Canada, and Alaska.

  15. How many EMA-workshops are needed to collect a representative sample of events in a hospital ward?

    DEFF Research Database (Denmark)

    Edwards, Kasper

    2017-01-01

    The effect modifier assessment (EMA) method (Edwards & Winkel, 2016) is a method for assessing the impact of an intervention and modifiers on a desired outcome e.g. improved work environment. The EMA-method captures events (a change in work) in a ward and for each event asses 1) impact on work...... and diverse tasks. This poses a problem when using the EMA-method and raises the research question of this abstract: How many EMA-workshops are needed to generate a representative collection of events in a ward? Methods Six EMA-workshops each with a full surgical team of six people was conducted in a heart...... on surgery. The ward was organized in three specialties: Heart surgery, Lung surgery and Child heart surgery. Events differed between specialties and therefor it was expected that saturation would be reached after minimum three workshops. The heart center is comparable to other surgical units...

  16. The second international workshop on enterprise security

    OpenAIRE

    Chang, V; Ramachandran, M; Yen, NN; Walters, RJ; Wills, G

    2016-01-01

    Welcome to our second international workshop on Enterprise Security as part of CloudCom 2015, Vancouver, Canada, November 30-December 3, 2015. The first international workshop held in Singapore has been a major success since then we have achieved greater team activities, research, and international collaborations as the major and significant outcome of our first workshop on this topic. Enterprise Security involves all business, products, governments, organization, and their contractors. This ...

  17. Validatie van risicogrenzen voor de bodem. Verslag van een workshop gericht op de opzet van een onderzoekprogramma

    NARCIS (Netherlands)

    Notenboom J; van Beelen P

    1992-01-01

    A workshop was organized June 10th last by the RIVM and the Directorate-General of Environmental Protection (Ministry of Housing, Physical Planning and Environment) on validation of ecotoxicological derived risk levels for soil ecosystems. The intention of the workschop was to give priorities and

  18. Ergonomics work stations decreases the health impairment and saves electrical energy at the woodworking workshop in Bali, Indonesia.

    Science.gov (United States)

    Sudiajeng, Lilik; Adiputra, Nyoman; Leibbrandt, Richard

    2012-12-01

    This research was conducted to assess the positive effect of the ergonomics work station on the health impairment and electrical energy usage at the woodworking workshop in Bali, Indonesia. Woodworking workshops are dangerous, particularly when they are used improperly. Workers are exposed to health hazards that cause health impairment and inefficiencies in their work conditions. A preliminary study at a woodworking workshop at the Bali State Polytechnic showed that the work station was not suitable to body size of the participants and caused awkward postures. In addition, there was also an inappropriate physical work environment. Both inappropriate work station and physical work environment caused participants to be less active and motivated. This paper reports on an experimental study into the effects of an ergonomic intervention at this workshop. The participants were 2 groups of male students with 10 participants in each group. The first group performed the task with the original work station as a control group, while the second group performed the task with the new work station. The study found a significant difference between groups (p work station decreased the working heart rate (16.7%), the total score of musculoskeletal disorders (17.3%), and the total score of psychological fatigue (21.5%). Furthermore, it also decreased the electrical energy usage (38.7%). This shows that an ergonomics intervention on work station decreased the health impairment and saved electrical energy usage. It also protected the workers from woodworking hazards and allowed participants to perform their tasks in healthy, safe, convenient and efficient work conditions.

  19. Special workshop on lung dosimetry

    International Nuclear Information System (INIS)

    Fisher, D.R.

    1983-01-01

    A Special Workshop on Lung Dosimetry was convened in Salt Lake City, Utah, on April 21-22, 1982, to stimulate the use of improved radiation dosimetry and to formulate a stronger basis for dose-response relationships for inhaled radionuclides. The two-day workshop was held in conjunction with the 30th Annual Meeting of the Radiation Research Society. Publication is planned

  20. Entrepreneurship Education: Workshops and Entrepreneurial Intentions

    Science.gov (United States)

    Pruett, Mark

    2012-01-01

    Using data collected from participants in an entrepreneurship education workshop series, the author examined the series' impact and tested a model of entrepreneurial intentions incorporating social and psychological factors. He found that entrepreneurial disposition and workshop participation significantly influenced intentions, exposure to role…

  1. Cleanroom Energy Efficiency Workshop Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Tschudi, Bill

    1999-03-15

    On March 15, 1999, Lawrence Berkeley National Laboratory hosted a workshop focused on energy efficiency in Cleanroom facilities. The workshop was held as part of a multiyear effort sponsored by the California Institute for Energy Efficiency, and the California Energy Commission. It is part of a project that concentrates on improving energy efficiency in Laboratory type facilities including cleanrooms. The project targets the broad market of laboratory and cleanroom facilities, and thus cross-cuts many different industries and institutions. This workshop was intended to raise awareness by sharing case study success stories, providing a forum for industry networking on energy issues, contributing LBNL expertise in research to date, determining barriers to implementation and possible solutions, and soliciting input for further research.

  2. Extreme Conditions Modeling Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    Coe, Ryan Geoffrey [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Neary, Vincent Sinclair [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Lawon, Michael J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Yu, Yi-Hsiang [National Renewable Energy Lab. (NREL), Golden, CO (United States); Weber, Jochem [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2014-07-01

    Sandia National Laboratories (SNL) and the National Renewable Energy Laboratory (NREL) hosted the Wave Energy Converter (WEC) Extreme Conditions Modeling (ECM) Workshop in Albuquerque, New Mexico on May 13–14, 2014. The objective of the workshop was to review the current state of knowledge on how to numerically and experimentally model WECs in extreme conditions (e.g. large ocean storms) and to suggest how national laboratory resources could be used to improve ECM methods for the benefit of the wave energy industry. More than 30 U.S. and European WEC experts from industry, academia, and national research institutes attended the workshop, which consisted of presentations from W EC developers, invited keynote presentations from subject matter experts, breakout sessions, and a final plenary session .

  3. Waterloo Workshop on Computer Algebra

    CERN Document Server

    Zima, Eugene; WWCA-2016; Advances in computer algebra : in honour of Sergei Abramov's' 70th birthday

    2018-01-01

    This book discusses the latest advances in algorithms for symbolic summation, factorization, symbolic-numeric linear algebra and linear functional equations. It presents a collection of papers on original research topics from the Waterloo Workshop on Computer Algebra (WWCA-2016), a satellite workshop of the International Symposium on Symbolic and Algebraic Computation (ISSAC’2016), which was held at Wilfrid Laurier University (Waterloo, Ontario, Canada) on July 23–24, 2016.   This workshop and the resulting book celebrate the 70th birthday of Sergei Abramov (Dorodnicyn Computing Centre of the Russian Academy of Sciences, Moscow), whose highly regarded and inspirational contributions to symbolic methods have become a crucial benchmark of computer algebra and have been broadly adopted by many Computer Algebra systems.

  4. Auroral Tomography Workshop, Proceedings

    International Nuclear Information System (INIS)

    Steen, Aa.

    1993-08-01

    In ionospheric and atmospheric physics the importance of multi-station imaging has grown as a consequence of the availability of scientific grade CCD cameras with digital output and affordable massive computing power. Tomographic inversion techniques are used in many different areas, e.g. medicine, plasma research and space physics. The tomography workshop was announced to gather a limited group of people interested in auroral tomography or tomographic inversion methods in general. ALIS (Auroral Large Imaging System) is a multi-station ground-based system developed primarily for three-dimensional auroral imaging, however other non-auroral objects can be studied with ALIS, e.g. stratospheric clouds. Several of the contributions in the workshop dealt with problems related to geometries similar to the ALIS-configuration. The Proceedings contain written contributions received either in abstract form or as full papers. The Proceedings also contain contributions intended for the Workshop but not presented due to the absence of the speaker. Separate abstracts have been prepared for 15 of the 17 papers

  5. Grid and Entrepreneurship Workshop

    CERN Multimedia

    2006-01-01

    The CERN openlab is organising a special workshop about Grid opportunities for entrepreneurship. This one-day event will provide an overview of what is involved in spin-off technology, with a special reference to the context of computing and data Grids. Lectures by experienced entrepreneurs will introduce the key concepts of entrepreneurship and review, in particular, the industrial potential of EGEE (the EU co-funded Enabling Grids for E-sciencE project, led by CERN). Case studies will be given by CEOs of European start-ups already active in the Grid and computing cluster area, and regional experts will provide an overview of efforts in several European regions to stimulate entrepreneurship. This workshop is designed to encourage students and researchers involved or interested in Grid technology to consider the entrepreneurial opportunities that this technology may create in the coming years. This workshop is organized as part of the CERN openlab student programme, which is co-sponsored by CERN, HP, ...

  6. Proceedings of the Workshop on software tools for distributed intelligent control systems

    Energy Technology Data Exchange (ETDEWEB)

    Herget, C.J. (ed.)

    1990-09-01

    The Workshop on Software Tools for Distributed Intelligent Control Systems was organized by Lawrence Livermore National Laboratory for the United States Army Headquarters Training and Doctrine Command and the Defense Advanced Research Projects Agency. The goals of the workshop were to the identify the current state of the art in tools which support control systems engineering design and implementation, identify research issues associated with writing software tools which would provide a design environment to assist engineers in multidisciplinary control design and implementation, formulate a potential investment strategy to resolve the research issues and develop public domain code which can form the core of more powerful engineering design tools, and recommend test cases to focus the software development process and test associated performance metrics. Recognizing that the development of software tools for distributed intelligent control systems will require a multidisciplinary effort, experts in systems engineering, control systems engineering, and compute science were invited to participate in the workshop. In particular, experts who could address the following topics were selected: operating systems, engineering data representation and manipulation, emerging standards for manufacturing data, mathematical foundations, coupling of symbolic and numerical computation, user interface, system identification, system representation at different levels of abstraction, system specification, system design, verification and validation, automatic code generation, and integration of modular, reusable code.

  7. PREFACE: International Workshop on Multi-Rate Processes and Hysteresis

    Science.gov (United States)

    Mortell, Michael P.; O'Malley, Robert E.; Pokrovskii, Alexei; Rachinskii, Dmitrii; Sobolev, Vladimir A.

    2008-07-01

    published as a special issue of Proceedings of the Russian Academy of Natural Sciences: Nonlinear dynamics of laser and reacting systems, and is available online at http://www.ins.ucc.ie/roh2002.htm. See further information at http://www.ins.ucc.ie/roh2002.htm Among the aims of these workshops were to bring together leading experts in singular perturbations and hysteresis phenomena in applied problems; to discuss important problems in areas such as reacting systems, semiconductor lasers, shock phenomena in economic modelling, fluid mechanics, etc with an emphasis on hysteresis and singular perturbations; to learn and to share modern techniques in areas of common interest. The `International Workshop on Multi-Rate Processes and Hysteresis' (University College Cork, Ireland, April 3-8, 2006) brought together more than 70 scientists (including more than 10 students), actively researching in the areas of dynamical systems with hysteresis and singular perturbations, to analyze those phenomena that occur in many industrial, physical and economic systems. The countries represented at the Workshop included Czech Republic, England, France, Germany, Hungary, Ireland, Israel, Italy, Poland, Romania, Russia, Scotland, South Africa, Switzerland and USA. All papers published in this volume of Journal of Physics: Conference Series have been peer reviewed through processes administered by the Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Publishing. The Workshop has been sponsored by Science Foundation Ireland (SFI), KE Consulting group, Drexel University, Philadelphia, USA, University College Cork (UCC), Boole Centre for Research in Informatics, UCC, Cork, School of Mathematical Sciences, UCC, Cork, Irish Mathematical Society, Tyndall National Institute, Cork, University of Limerick, Cork Institute of Technology, and Heineken. The supportive affiliation of the European Geophysics Society

  8. Thirteenth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Brigham, W.E.; Miller, F.G.; Cook, J.W. (Stanford Geothermal Program)

    1988-01-21

    PREFACE The Thirteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 19-21, 1988. Although 1987 continued to be difficult for the domestic geothermal industry, world-wide activities continued to expand. Two invited presentations on mature geothermal systems were a keynote of the meeting. Malcolm Grant presented a detailed review of Wairakei, New Zealand and highlighted plans for new development. G. Neri summarized experience on flow rate decline and well test analysis in Larderello, Italy. Attendance continued to be high with 128 registered participants. Eight foreign countries were represented: England, France, Iceland, Italy, New Zealand, Japan, Mexico and The Philippines. A discussion of future workshops produced a strong recommendation that the Stanford Workshop program continue for the future. There were forty-one technical presentations at the Workshop. All of these are published as papers in this Proceedings volume. Four technical papers not presented at the Workshop are also published. In addition to these forty five technical presentations or papers, the introductory address was given by Henry J. Ramey, Jr. from the Stanford Geothermal Program. The Workshop Banquet speaker was Gustavo Calderon from the Inter-American Development Bank. We thank him for sharing with the Workshop participants a description of the Bank???s operations in Costa Rica developing alternative energy resources, specifically Geothermal, to improve the country???s economic basis. His talk appears as a paper in the back of this volume. The chairmen of the technical sessions made an important contribution to the workshop. Other than Stanford faculty members they included: J. Combs, G. T. Cole, J. Counsil, A. Drenick, H. Dykstra, K. Goyal, P. Muffler, K. Pruess, and S. K. Sanyal. The Workshop was organized by the Stanford Geothermal Program faculty, staff and students. We would like to thank Marilyn King, Pat Oto, Terri Ramey, Bronwyn Jones

  9. Technology Requirements For In Situ Decommissioning Workshop Report

    International Nuclear Information System (INIS)

    Jannik, T.; Lee, P.; Gladden, J.; Langton, C.; Serrato, M.; Urland, C.; Reynolds, E.

    2009-01-01

    In recognition of the increasing attention being focused on In Situ Decommissioning (ISD or entombment) as an acceptable and beneficial decommissioning end state, the Department of Energy's (DOE) Office of Environmental Management (EM) is developing guidance for the implementation of ISD of excess facilities within the DOE complex. Consistent with the overarching DOE goals for increased personnel and environmental safety, reduced technical uncertainties and risks, and overall gains in efficiencies and effectiveness, EM's Office of Deactivation and Decommissioning and Facility Engineering (EM-23) initiated efforts to identify the technical barriers and technology development needs for the optimal implementation of ISD. Savannah River National Laboratory (SRNL), as the EM Corporate Laboratory, conducted an ISD Technology Needs Workshop to identify the technology needs at DOE sites. The overall goal of the workshop was to gain a full understanding of the specific ISD technical challenges, the technologies available, and those needing development. The ISD Workshop was held December 9-10, 2008 in Aiken, SC. Experienced decommissioning operations personnel from Richland Operations Office (RL), Idaho National Laboratory (INL) and Savannah River Site (SRS) along with scientists and engineers specific expertise were assembled to identify incremental and 'game changing' solutions to ISD technology challenges. The workshop and follow-up activities yielded 14 technology needs statements and the recommendation that EM-23 prioritize and pursue the following specific technology development and deployment actions. For each action, the recommended technology acquisition mechanisms (competitive solicitation (CS) or direct funding (TCR)) are provided. Activities that are time critical for ISD projects, or require unique capabilities that reside in the DOE Laboratory system will be funded directly to those institutions. Activities that have longer lead times and where the private

  10. Report on International Spaceborne Imaging Spectroscopy Technical Committee Calibration and Validation Workshop, National Environment Research Council Field Spectroscopy Facility, University of Edinburgh

    Science.gov (United States)

    Ong, C,; Mueller, A.; Thome, K.; Bachmann, M.; Czapla-Myers, J.; Holzwarth, S.; Khalsa, S. J.; Maclellan, C.; Malthus, T.; Nightingale, J.; hide

    2016-01-01

    Calibration and validation are fundamental for obtaining quantitative information from Earth Observation (EO) sensor data. Recognising this and the impending launch of at least five sensors in the next five years, the International Spaceborne Imaging Spectroscopy Technical Committee instigated a calibration and validation initiative. A workshop was conducted recently as part of this initiative with the objective of establishing a good practice framework for radiometric and spectral calibration and validation in support of spaceborne imaging spectroscopy missions. This paper presents the outcomes and recommendations for future work arising from the workshop.

  11. Exploring Programmatic Interoperability: Army Future Force Workshop

    National Research Council Canada - National Science Library

    Smith , II., James D; Meyers, B. C

    2005-01-01

    .... It describes the background and motivation for the workshop, provides a brief overview of the workshop activities, and highlights the key observations and conclusions obtained through the course...

  12. IAEA monitoring field trials workshop

    International Nuclear Information System (INIS)

    Ross, H.H.; Cooley, J.N.; Belew, W.L.

    1995-01-01

    Recent safeguards inspections in Iraq and elsewhere by the International Atomic Energy Agency (IAEA) have led to the supposition that environmental monitoring can aid in verifying declared and in detecting undeclared nuclear activities or operations. This assumption was most recently examined by the IAEA's Standing Advisory Group on Safeguards Implementation (SAGSI), in their reports to the IAEA Board of Governors. In their reports, SAGSI suggested that further assessment and development of environmental monitoring would be needed to fully evaluate its potential application to enhanced IAEA safeguards. Such an inquiry became part of the IAEA ''Programme 93+2'' assessment of measures to enhance IAEA safeguards. In March, 1994, the International Safeguards Group at Oak Ridge hosted an environmental monitoring field trial workshop for IAEA inspectors to train them in the techniques needed for effective environmental sampling. The workshop included both classroom lectures and actual field sampling exercises. The workshop was designed to emphasize the analytical infrastructure needed for an environmental program, practical sampling methods, and suggested procedures for properly planning a sampling campaign. Detailed techniques for swipe, vegetation, soil, biota, and water associated sampling were covered. The overall approach to the workshop, and observed results, are described

  13. Impressions from the 3rd Nordcode Seminar & Workshop

    DEFF Research Database (Denmark)

    Lenau, Torben Anker; Boelskifte, Per; Hansen, Claus Thorp

    2005-01-01

    This paper summarises the purpose and contents of the 3rd Nordcode Seminar and Workshop. First, the workshop assignments are described. Second, the paper briefly presents the topics of the keynote speeches and all presentations of the working papers that took place in the seminar.......This paper summarises the purpose and contents of the 3rd Nordcode Seminar and Workshop. First, the workshop assignments are described. Second, the paper briefly presents the topics of the keynote speeches and all presentations of the working papers that took place in the seminar....

  14. How to put on an ANS teachers' workshop

    International Nuclear Information System (INIS)

    Besmann, T.M.

    1991-01-01

    One of the most successful public outreach programs organized by the American Nuclear Society (ANS) has been the teachers' workshops. They are so highly thought of that a national meeting is considered incomplete without an attendant workshop. The workshops are also included in topical meetings, and a number are simply organized by local sections with no connection to a technical meeting. The accumulated experience with these workshops has now matured to where a set of reasonable guidelines can be established, although there are no guarantees of success or hard and fast rules

  15. PREFACE: EMAS 2013 Workshop: 13th European Workshop on Modern Developments and Applications in Microbeam Analysis

    Science.gov (United States)

    Llovet, Xavier, Dr; Matthews, Mr Michael B.; Brisset, François, Dr; Guimarães, Fernanda, Dr; Vieira, Professor Joaquim M., Dr

    2014-03-01

    This volume of the IOP Conference Series: Materials Science and Engineering contains papers from the 13th Workshop of the European Microbeam Analysis Society (EMAS) on Modern Developments and Applications in Microbeam Analysis which took place from the 12th to the 16th of May 2013 in the Centro de Congressos do Alfândega, Porto, Portugal. The primary aim of this series of workshops is to assess the state-of-the-art and reliability of microbeam analysis techniques. The workshops also provide a forum where students and young scientists starting out on a career in microbeam analysis can meet and discuss with the established experts. The workshops have a very specific format comprising invited plenary lectures by internationally recognized experts, poster presentations by the participants and round table discussions on the key topics led by specialists in the field. This workshop was organized in collaboration with LNEG - Laboratório Nacional de Energia e Geologia and SPMICROS - Sociedade Portuguesa de Microscopia. The technical programme included the following topics: electron probe microanalysis, future technologies, electron backscatter diffraction (EBSD), particle analysis, and applications. As at previous workshops there was also a special oral session for young scientists. The best presentation by a young scientist was awarded with an invitation to attend the 2014 Microscopy and Microanalysis meeting at Hartford, Connecticut. The prize went to Shirin Kaboli, of the Department of Metals and Materials Engineering of McGill University (Montréal, Canada), for her talk entitled ''Plastic deformation studies with electron channelling contrast imaging and electron backscattered diffraction''. The continuing relevance of the EMAS workshops and the high regard in which they are held internationally can be seen from the fact that 74 posters from 21 countries were on display at the meeting and that the participants came from as far away as Japan, Canada and the USA. A

  16. An Artificial Intelligence-Based Environment Quality Analysis System

    OpenAIRE

    Oprea , Mihaela; Iliadis , Lazaros

    2011-01-01

    Part 20: Informatics and Intelligent Systems Applications for Quality of Life information Services (ISQLIS) Workshop; International audience; The paper describes an environment quality analysis system based on a combination of some artificial intelligence techniques, artificial neural networks and rule-based expert systems. Two case studies of the system use are discussed: air pollution analysis and flood forecasting with their impact on the environment and on the population health. The syste...

  17. Customer/User Workshops in Product development

    DEFF Research Database (Denmark)

    Brandt, Eva; Binder, Thomas

    1997-01-01

    In a recent product development project, we have taken part in establishing and organising a series of workshops with a group of customers/users of a future product line through out the development project. The workshops is a kind of informal meetingplace for engineering, marketing, customers...... and discuss experiences with this kind of collaborative fora. We have tried to demonstrate that having an on-going dialogue with users/customers also during detailed design in not only a means to keep 'the voive of the customer alive'. We have found that the workshops have an important impact on securing...

  18. Workshop on accelerator magnet superconductors. Proceedings

    International Nuclear Information System (INIS)

    2004-01-01

    The workshop on accelerator magnet superconductors has gathered 102 registered participants from research laboratories, universities and industry. 8 European companies, active in superconducting materials and cables were present. This workshop has been organized to deal with the status of the world research and development on superconducting materials and cables for high field magnets (B > 10 T). The workshop has also reviewed the status of high temperature superconductors and transmission line cables for potential use in low field superconducting magnets for injectors and beam transfer lines, as well as cables for pulsed magnets that might be used in future hadron colliders or injectors

  19. Workshop on accelerator magnet superconductors. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The workshop on accelerator magnet superconductors has gathered 102 registered participants from research laboratories, universities and industry. 8 European companies, active in superconducting materials and cables were present. This workshop has been organized to deal with the status of the world research and development on superconducting materials and cables for high field magnets (B > 10 T). The workshop has also reviewed the status of high temperature superconductors and transmission line cables for potential use in low field superconducting magnets for injectors and beam transfer lines, as well as cables for pulsed magnets that might be used in future hadron colliders or injectors.

  20. WWER-1000 reactor simulator. Workshop material

    International Nuclear Information System (INIS)

    2003-01-01

    The International Atomic Energy Agency (IAEA) has established an activity in nuclear reactor simulation computer programs to assist its Member States in education. The objective is to provide, for a variety of advanced reactor types, insight and practice in their operational characteristics and their response to perturbations and accident situations. To achieve this, the IAEA arranges for the development and distribution of simulation programs and educational material and sponsors courses and workshops. The workshops are in two parts: techniques and tools for reactor simulator development; and the use of reactor simulators in education. Workshop material for the first part is covered in the IAEA publication: Training Course Series 12, 'Reactor Simulator Development' (2001). Course material for workshops using a pressurized water reactor (PWR) Simulator developed for the IAEA by Cassiopeia Technologies Inc. of Canada is presented in the IAEA publication: Training Course Series No. 22 'Pressurized Water Reactor Simulator' (2003) and Training Course Series No. 23 'Boiling Water Reactor Simulator' (2003). This report consists of course material for workshops using the WWER-1000 Reactor Department Simulator from the Moscow Engineering and Physics Institute, Russian Federation. N. V. Tikhonov and S. B. Vygovsky of the Moscow Engineering and Physics Institute prepared this report for the IAEA