WorldWideScience

Sample records for mechanical properties related

  1. Mechanical properties of cellulose in orthopaedic devices and related environments.

    Science.gov (United States)

    Poustis, J; Baquey, C; Chauveaux, D

    1994-01-01

    The authors have undertaken a series of mechanical tests in order to assess the performance of regenerated cellulose under either static or dynamic conditions, and to evaluate its long-term behaviour under mechanical stress. In this respect, bending stiffness, resistance to compression, creep under compressive stress, in vitro and in vivo ageing and fatigue resistance were studied. It appears that this material demonstrates mechanical properties which depend upon its density, which is itself related to its water content. Moreover, this material is very stable under dynamic stress. This could be an interesting property for use in orthopaedic devices.

  2. Mechanical and hydraulic properties of rocks related to induced seismicity

    Science.gov (United States)

    Witherspoon, P.A.; Gale, J.E.

    1977-01-01

    Witherspoon, P.A. and Gale, J.E., 1977. Mechanical and hydraulic properties of rocks related to induced seismicity. Eng. Geol., 11(1): 23-55. The mechanical and hydraulic properties of fractured rocks are considered with regard to the role they play in induced seismicity. In many cases, the mechanical properties of fractures determine the stability of a rock mass. The problems of sampling and testing these rock discontinuities and interpreting their non-linear behavior are reviewed. Stick slip has been proposed as the failure mechanism in earthquake events. Because of the complex interactions that are inherent in the mechanical behavior of fractured rocks, there seems to be no simple way to combine the deformation characteristics of several sets of fractures when there are significant perturbations of existing conditions. Thus, the more important fractures must be treated as individual components in the rock mass. In considering the hydraulic properties, it has been customary to treat a fracture as a parallel-plate conduit and a number of mathematical models of fracture systems have adopted this approach. Non-steady flow in fractured systems has usually been based on a two-porosity model, which assumes the primary (intergranular) porosity contributes only to storage and the secondary (fracture) porosity contributes only to the overall conductivity. Using such a model, it has been found that the time required to achieve quasi-steady state flow in a fractured reservoir is one or two orders of magnitude greater than it is in a homogeneous system. In essentially all of this work, the assumption has generally been made that the fractures are rigid. However, it is clear from a review of the mechanical and hydraulic properties that not only are fractures easily deformed but they constitute the main flow paths in many rock masses. This means that one must consider the interaction of mechanical and hydraulic effects. A considerable amount of laboratory and field data is now

  3. Relating wood properties to handsheet porosity and mechanical strength

    CSIR Research Space (South Africa)

    Maharaj, S

    2006-11-01

    Full Text Available During chemical pulping for papermaking, individual fibres in wood are separated by dissolving the lignin layer cementing these together. The mechanical strength of the paper produced is influenced by the extent to which fibres make physical contact...

  4. Physicochemical properties of physical chitin hydrogels: modeling and relation with the mechanical properties.

    Science.gov (United States)

    Vachoud, L; Domard, A

    2001-01-01

    In this work, we were interested in the modeling of syneresis of physical chitin hydrogels by a mathematic law allowing us to predict the variation of the weight of the gel as a function of time. The variation of the weight of the gel during syneresis can be described by W(t)()/W(0) = (t(1/2) + (W(infinity)/W(0))t)/(t(1/2)) + t) where W(0), W(infinity), and W(t)() are the weights of the gel at the beginning of syneresis, for infinite time and for a time t, respectively. t(1/2) corresponds to the half-time of syneresis. W(infinity)/W(0) and t(1/2) were studied in relation with several parameters such as the ionic strength, pH, degree of acetylation of chitin and the initial concentration of polymer. The mechanical properties of chitin hydrogels maintained during syneresis in media of different pH's and ionic strengths were also investigated.

  5. Mechanical properties of the normal human cartilage-bone complex in relation to age

    DEFF Research Database (Denmark)

    Ding, Ming; Dalstra, M; Linde, F

    1998-01-01

    OBJECTIVE: This study investigates the age-related variations in the mechanical properties of the normal human tibial cartilage-bone complex and the relationships between cartilage and bone. DESIGN: A novel technique was applied to assess the mechanical properties of the cartilage and bone by means...... normal donors aged 16-83 years were tested in compression. The deformation was measured simultaneously in bone and cartilage to obtain the mechanical properties of both tissues. RESULTS: The stiffnesses and elastic energies of both cartilage and bone showed an initial increase, with maxima at 40 years......, followed by a steady decline. The viscoelastic energy was maximal at younger ages (16-29 years), followed by a steady decline. The energy absorption capacity did not vary with age. Stiffnesses and elastic energies were correlated significantly between cartilage and bone. CONCLUSIONS: The present study...

  6. Mechanical properties related to the microstructure of seven different fiber reinforced composite posts

    Science.gov (United States)

    Alonso de la Peña, Víctor; Caserío Valea, Martín; Guitián Rivera, Francisco

    2016-01-01

    PURPOSE The aim of this in vitro study was to evaluate the mechanical properties (bending strength and hardness) of seven different fiber reinforced composite posts, in relation to their microstructural characteristics. MATERIALS AND METHODS Two hundred eighty posts were divided into seven groups of 40, one group for each type of post analyzed. Within each group, 15 posts were subjected to three-point bending strength test, 15 to a microhardess meter for the Knoop hardness, and 10 to Scanning Electron Microscope in order to determine the diameter of the fibers and the percentage of fibers embedded in the matrix. To compare the flexural strength in relation to the type of fiber, matrix, and the hardness of the posts, a Kruskal-Wallis H test was used. The Jonckheere-Terpstra test was used to determine if the volume percent of fibers in the post influenced the bending strength. RESULTS The flexural strength and the hardness depended on the type of fibers that formed the post. The lower flexural strength of a post could be due to deficient bonding between the fiber and the resin matrix. CONCLUSION According to the results, other factors, besides the microstructural characteristics, may also influence the mechanical properties of the post. The feature that has more influence on the mechanical properties of the posts is the type of fiber. PMID:28018560

  7. The impact of relative humidity during electrospinning on the morphology and mechanical properties of nanofibers.

    Science.gov (United States)

    Pelipenko, Jan; Kristl, Julijana; Janković, Biljana; Baumgartner, Saša; Kocbek, Petra

    2013-11-01

    Electrospinning is an efficient and flexible method for nanofiber production, but it is influenced by many systemic, process, and environmental parameters that govern the electrospun product morphology. This study systematically investigates the influence of relative humidity (RH) on the electrospinning process. The results showed that the morphology of the electrospun product (shape and diameter) can be manipulated with precise regulation of RH during electrospinning. Because the diameter of nanofibers correlates with their rigidity, it was shown that RH control can lead to manipulation of material mechanical properties. Finally, based on the solution's rheological parameter-namely, phase shift angle-we were able to predict the loss of homogenous nanofiber structure in correlation with RH conditions during electrospinning. This research addresses the mechanism of RH impact on the electrospinning process and offers the background to exploit it in order to better control nanomaterial properties and alter its applicability.

  8. RELATION BETWEEN MECHANICAL PROPERTIES AND PYROLYSIS TEMPERATURE OF PHENOL FORMALDEHYDE RESIN FOR GAS SEPARATION MEMBRANES

    Directory of Open Access Journals (Sweden)

    MONIKA ŠUPOVÁ

    2012-03-01

    Full Text Available The aim of this paper has been to characterize the relation between the pyrolysis temperature of phenol-formaldehyde resin, the development of a porous structure, and the mechanical properties for the application of semipermeable membranes for gas separation. No previous study has dealt with this problem in its entirety. Phenol-formaldehyde resin showed an increasing trend toward micropore porosity in the temperature range from 500 till 1000°C, together with closure of mesopores and macropores. Samples cured and pyrolyzed at 1000°C pronounced hysteresis of desorption branch. The ultimate bending strength was measured using a four-point arrangement that is more suitable for measuring of brittle materials. The chevron notch technique was used for determination the fracture toughness. The results for mechanical properties indicated that phenol-formaldehyde resin pyrolyzates behaved similarly to ceramic materials. The data obtained for the material can be used for calculating the technical design of gas separation membranes.

  9. Intrinsic and extrinsic mechanical properties related to the differentiation of mesenchymal stem cells.

    Science.gov (United States)

    Lee, Jin-Ho; Park, Hun-Kuk; Kim, Kyung Sook

    2016-05-06

    Diverse intrinsic and extrinsic mechanical factors have a strong influence on the regulation of stem cell fate. In this work, we examined recent literature on the effects of mechanical environments on stem cells, especially on differentiation of mesenchymal stem cells (MSCs). We provide a brief review of intrinsic mechanical properties of single MSC and examined the correlation between the intrinsic mechanical property of MSC and the differentiation ability. The effects of extrinsic mechanical factors relevant to the differentiation of MSCs were considered separately. The effect of nanostructure and elasticity of the matrix on the differentiation of MSCs were summarized. Finally, we consider how the extrinsic mechanical properties transfer to MSCs and then how the effects on the intrinsic mechanical properties affect stem cell differentiation.

  10. Mechanical properties of geopolymer mortars in relation to their porous structure

    Directory of Open Access Journals (Sweden)

    Michaela Steinerova

    2011-12-01

    Full Text Available This research dealt with metakaolinite geopolymers of various textures controlled by the addition of a quartz sand in a range of 0–93 wt.%. Mechanical properties were measured to quantify the impact of changing composition on the specimen structure, aimed to the mixture optimizing. The compressive and flexural strengths, Young’s modulus and frost resistance were compared with structure parameters determined by mercury porosimetry. The resulting relations are discussed revealing varying control plots modifying the strengths and frost resistance. The existence of an interfacial transition zone caused by the interaction between the quartz aggregates and the geopolymer was verified to be positively affecting the composite strengths. It has been found that the material of the best mechanical properties underwent the maximal densification of the sand aggregates causing the approaching on the shortest distance with the condition of entirely coating by geopolymer gel. In this manner, the highest interface participation is represented on the composite structure. Besides the high strength, freezing resistance was conditioned by an at least 20% content (within the total porosity of 1-8 μm large mesopores.

  11. Mechanical properties and constitutive relations for tantalum and tantalum alloys under high-rate deformation

    Energy Technology Data Exchange (ETDEWEB)

    Chen, S.R.; Gray, G.T. III; Bingert, S.R. [Los Alamos National Lab., NM (United States). Materials Science and Technology Div.

    1996-05-01

    Tantalum and its alloys have received increased interest as a model bcc metal and for defense-related applications. The stress-strain behavior of several tantalums, possessing varied compositions and manufacturing histories, and tantalum alloyed with tungsten, was investigated as a function of temperature from {minus}196 C to 1,000 C, and strain rate from 10{sup {minus}3} s{sup {minus}1} to 8,000 s{sup {minus}1}. The yield stress for all the Ta-materials was found to be sensitive to the test temperature, the impurity and solute contents; however, the strain hardening remained very similar for various ``pure`` tantalums but increased with alloying. Powder-metallurgy (P/M) tantalum with various levels of oxygen content produced via different processing paths was also investigated. Similar mechanical properties compared to conventionally processed tantalums were achieved in the P/M Ta. This data suggests that the frequently observed inhomogeneities in the mechanical behavior of tantalum inherited from conventional processes can be overcome. Constitutive relations based upon the Johnson-Cook, the Zerilli-Armstrong, and the Mechanical Threshold Stress models were evaluated for all the Ta-based materials. Parameters were also fit for these models to a tantalum-bar material. Flow stresses of a Ta bar stock subjected to a large-strain deformation of {var_epsilon} = 1.85 via multiple upset forging were obtained. The capabilities and limitations of each model for large-strain applications are examined. The deformation mechanisms controlling high-rate plasticity in tantalum are revisited.

  12. Mechanical properties and constitutive relations for molybdenum under high-rate deformation

    Energy Technology Data Exchange (ETDEWEB)

    Chen, S.R.; Maudlin, P.J.; Gray, G.T. III

    1998-01-01

    Molybdenum and its alloys have received increased interest in recent years for ballistic applications. The stress-strain behavior of several molybdenums possessing various compositions, manufacturing sources, and the degree of pre-straining, were investigated as a function of temperature from 77 to 1,273 K, and strain rate from 10{sup {minus}3} s{sup {minus}1} to 8,000 s{sup {minus}1}. The yield stress was found to be sensitive to the test temperature and strain rate, however, the strain hardening remained rate-insensitive. The constitutive response of a powder-metallurgy molybdenum was also investigated; similar mechanical properties compared to conventionally wrought processed molybdenums were achieved. Constitutive relations based upon the Johnson-Cook, the Zerilli-Armstrong and the Mechanical Threshold Stress (MTS) models were evaluated and fit for the various Mo-based materials. The capabilities and limitations of each model for large-strain applications were examined. The differences between the three models are demonstrated using model comparisons to Taylor cylinder validation experiments.

  13. Mechanical properties of the triceps surae tendon and aponeurosis in relation to intensity of sport activity.

    Science.gov (United States)

    Arampatzis, Adamantios; Karamanidis, Kiros; Morey-Klapsing, Gaspar; De Monte, Gianpiero; Stafilidis, Savvas

    2007-01-01

    The purpose of the present study was to investigate whether the mechanical properties (i.e. force strain relationship) of the triceps surae tendon and aponeurosis relate to the performed sport activity in an intensity-dependent manner. This was done by comparing sprinters with endurance runners and subjects not active in sports. Sixty-six young male subjects (26+/-5 yr; 183+/-6 cm; 77.6+/-6.7 kg) participated in the study. Ten of these subjects were adults not active in sports, 28 were endurance runners and 28 sprinters. All subjects performed isometric maximal voluntary plantar flexion contractions (MVC) on a dynamometer. The distal aponeuroses of the gastrocnemius medialis (GM) was visualised by ultrasound during the MVC. The results showed that only the sprinters had higher normalised stiffness (relationship between tendon force and tendon strain) of the triceps surae tendon and aponeurosis and maximal calculated tendon forces than the endurance runners and the subjects not active in sports. Furthermore, including the data of all 66 examined participants tendon stiffness correlated significantly (r=0.817, Paponeurosis do not show a graded response to the intensity of the performed sport activity but rather remain at control level in a wide range of applied strains and that strain amplitude and/or frequency should exceed a given threshold in order to trigger additional adaptation effects. The results further indicate that subjects with higher muscle strength possibly increase the margin of tolerated mechanical loading of the tendon due to the greater stiffness of their triceps surae tendon and aponeurosis.

  14. Cell wall swelling, fracture mode, and the mechanical properties of cherry fruit skins are closely related.

    Science.gov (United States)

    Brüggenwirth, Martin; Knoche, Moritz

    2017-04-01

    Cell wall swelling, fracture mode (along the middle lamellae vs. across cell walls), stiffness, and pressure at fracture of the sweet cherry fruit skin are closely related. Skin cracking is a common phenomenon in many crops bearing fleshy fruit. The objectives were to investigate relationships between the mode of fracture, the extent of cell wall swelling, and the mechanical properties of the fruit skin using sweet cherry (Prunus avium) as a model. Cracking was induced by incubating whole fruit in deionised water or by fracturing exocarp segments (ESs) in biaxial tensile tests. The fracture mode of epidermal cells was investigated by light microscopy. In biaxial tensile tests, the anticlinal cell walls of the ES fractured predominantly across the cell walls (rather than along) and showed no cell wall swelling. In contrast, fruit incubated in water fractured predominantly along the anticlinal epidermal cell walls and the cell walls were swollen. Swelling of cell walls also occurred when ESs were incubated in malic acid, in hypertonic solutions of sucrose, or in water. Compared to the untreated controls, these treatments resulted in more frequent fractures along the cell walls, lower pressures at fracture (p fracture), and lower moduli of elasticity (E, i.e., less stiff). Conversely, compared to the untreated controls, incubating the ES in CaCl2 and in high concentrations of ethanol resulted in thinner cell walls, in less frequent fractures along the cell walls, higher E and p fracture. Our study demonstrates that fracture mode, stiffness, and pressure at fracture are closely related to cell wall swelling. A number of other factors, including cultivar, ripening stage, turgor, CaCl2, and malic acid, exert their effects only indirectly, i.e., by affecting cell wall swelling.

  15. Determination of Some Mechanical Properties of Almond Seed Related to Design of Food Processing Machines

    Directory of Open Access Journals (Sweden)

    M. O. Sunmonu

    2015-06-01

    Full Text Available In this study, some selected mechanical properties of red and white varieties of Almond seeds grown in Nigeria were determined using Testometric M500 – 100AT machine. The fracture force, compressive strength, deformation at yield for red varieties were 2679.40 ± 580.29 N, 408.70 ± 41.90 N/mm2 and 7.03 ± 0.65 mm respectively. The values obtained for the white varieties were 2843.90 ± 330.22 N, 396.20 ± 49.40 N/mm2, and 7.27 ± 0.46 mm. The determined engineering properties are vital for the design of postharvest handling and processing systems for Almond seeds as statistical test showed that there are significant differences (at 5% level between the engineering properties of the two seeds studied.

  16. The physical and mechanical properties of laterite gravels from southeastern Nigeria relative to their engineering performance

    Science.gov (United States)

    Okagbue, C. O.

    Laterite gravels are used extensively as aggregates for highway construction, concrete making and fills in SE Nigeria. This paper presents results of laboratory investigations carried out to evaluate the physical and mechanical properties of these gravels. High mechanical strength, as measured by aggregate crushing (AC), and Los Angeles abrasion (LAA) values were found to be significant factors controlling the performance. Results indicate that significant correlations exist between these and specific gravity, water absorption and angularity of the gravels. No clear distinction in physical and mechanical properties could be found between the laterite gravels formed over sandstones and shales, indicating perhaps that effects of parent rock on the physical and mechanical nature of laterite gravels is of secondary importance. It is proposed that laterite gravels with AC and LAA values in the range of 30-40% and 34-45%, respectively and 10% fines value of between 8 and 4 tonnes be used only for medium and light trafficked roads. Those with AC and LAA values of less than 30% and 34%, respectively and 10% fines value of greater than 8 tonnes can be used for heavily trafficked roads, provided that acceptable gradation, plasticity limits (on the fines) and other construction specifications are met.

  17. The Relation Between Collagen Fibril Kinematics and Mechanical Properties in the Mitral Valve Anterior Leaflet

    Energy Technology Data Exchange (ETDEWEB)

    Liao,J.; Yang, L.; Grashow, J.; Sacks, M.

    2007-01-01

    We have recently demonstrated that the mitral valve anterior leaflet (MVAL) exhibited minimal hysteresis, no strain rate sensitivity, stress relaxation but not creep (Grashow et al., 2006, Ann Biomed Eng., 34(2), pp. 315-325; Grashow et al., 2006, Ann Biomed. Eng., 34(10), pp. 1509-1518). However, the underlying structural basis for this unique quasi-elastic mechanical behavior is presently unknown. As collagen is the major structural component of the MVAL, we investigated the relation between collagen fibril kinematics (rotation and stretch) and tissue-level mechanical properties in the MVAL under biaxial loading using small angle X-ray scattering. A novel device was developed and utilized to perform simultaneous measurements of tissue level forces and strain under a planar biaxial loading state. Collagen fibril D-period strain ({epsilon}{sub D}) and the fibrillar angular distribution were measured under equibiaxial tension, creep, and stress relaxation to a peak tension of 90 N/m. Results indicated that, under equibiaxial tension, collagen fibril straining did not initiate until the end of the nonlinear region of the tissue-level stress-strain curve. At higher tissue tension levels, {epsilon}{sub D} increased linearly with increasing tension. Changes in the angular distribution of the collagen fibrils mainly occurred in the tissue toe region. Using {epsilon}{sub D}, the tangent modulus of collagen fibrils was estimated to be 95.5{+-}25.5 MPa, which was {approx}27 times higher than the tissue tensile tangent modulus of 3.58{+-}1.83 MPa. In creep tests performed at 90 N/m equibiaxial tension for 60 min, both tissue strain and D remained constant with no observable changes over the test length. In contrast, in stress relaxation tests performed for 90 min {epsilon}{sub D} was found to rapidly decrease in the first 10 min followed by a slower decay rate for the remainder of the test. Using a single exponential model, the time constant for the reduction in collagen

  18. Relation between the compaction rate and physical and mechanical properties of particleboards

    Directory of Open Access Journals (Sweden)

    Fabricio Moura Dias

    2005-09-01

    Full Text Available The compaction rate, the relation between the density of the wood panel and the density of the wood used for producing the particles, is an indicator of the product's densification. Among the various types of wood panels, particleboards are widely employed in the lumber industry, mainly for the furniture production. This paper presents a study of the relation between the compaction rate and the properties of tensile strength perpendicular to surface, Modulus of Rupture (MOR and Modulus of Elasticity (MOE obtained from a static bending test, thickness swelling and water absorption (2 and 24 hours. These properties were calculated according to the Brazilian ABNT, NBR 14810 standard. Particleboards were produced using the species Pinus elliotti and adhesive ureaformaldehyde. The relation was established by a multiple linear regression, and the most appropriate statistical models were determined. The estimated models indicate statistically significant effects of water absorption in 2 hours and MOR in the particleboards' compaction rate.

  19. Mineral Wool Macrostructure Parameter’s Relation with Product’s Mechanical Properties

    Directory of Open Access Journals (Sweden)

    Andrius BUSKA

    2016-05-01

    Full Text Available The experimental tests established the relations of rigid mineral wool products (with different structure macrostructure parameters with main their mechanical characteristic – compressibility. The products within the nominal density between 45 and 170 kg/m3 were analysed. Determined that strong functional relationship exists between the values of critical compressive stress and macrostructure parameters, density and organic content of mineral wool products, because the value of the multiple correlation coefficient equals 0.95. Using the obtained empirical equation is possible predict and calculate the mechanical behiaviour (compression stress of mineral wool slabs by using macrostructure parameters and other (density, organic content characteristics.

  20. Mechanical Properties of Transcription

    Science.gov (United States)

    Sevier, Stuart A.; Levine, Herbert

    2017-06-01

    The mechanical properties of transcription have recently been shown to play a central role in gene expression. However, a full physical characterization of this central biological process is lacking. In this Letter, we introduce a simple description of the basic physical elements of transcription where RNA elongation, RNA polymerase rotation, and DNA supercoiling are coupled. The resulting framework describes the relative amount of RNA polymerase rotation and DNA supercoiling that occurs during RNA elongation. Asymptotic behavior is derived and can be used to experimentally extract unknown mechanical parameters of transcription. Mechanical limits to transcription are incorporated through the addition of a DNA supercoiling-dependent RNA polymerase velocity. This addition can lead to transcriptional stalling and resulting implications for gene expression, chromatin structure and genome organization are discussed.

  1. Decorin expression is important for age-related changes in tendon structure and mechanical properties

    Science.gov (United States)

    Dunkman, Andrew A.; Buckley, Mark R.; Mienaltowski, Michael J.; Adams, Sheila M.; Thomas, Stephen J.; Satchell, Lauren; Kumar, Akash; Pathmanathan, Lydia; Beason, David P.; Iozzo, Renato V.; Birk, David E.; Soslowsky, Louis J.

    2013-01-01

    The aging population is at an increased risk of tendon injury and tendinopathy. Elucidating the molecular basis of tendon aging is crucial to understanding the age-related changes in structure and function in this vulnerable tissue. In this study, the structural and functional features of tendon aging are investigated. In addition, the roles of decorin and biglycan in the aging process were analyzed using transgenic mice at both mature and aged time points. Our hypothesis is that the increase in tendon injuries in the aging population is the result of altered structural properties that reduce the biomechanical function of the tendon and consequently increase susceptibility to injury. Decorin and biglycan are important regulators of tendon structure and therefore, we further hypothesized that decreased function in aged tendons is partly the result of altered decorin and biglycan expression. Biomechanical analyses of mature (day 150) and aged (day 570) patellar tendons revealed deteriorating viscoelastic properties with age. Histology and polarized light microscopy demonstrated decreased cellularity, alterations in tenocyte shape, and reduced collagen fiber alignment in the aged tendons. Ultrastructural analysis of fibril diameter distributions indicated an altered distribution in aged tendons with an increase of large diameter fibrils. Aged wild type tendons maintained expression of decorin which was associated with the structural and functional changes seen in aged tendons. Aged patellar tendons exhibited altered and generally inferior properties across multiple assays. However, decorin-null tendons exhibited significantly decreased effects of aging compared to the other genotypes. The amelioration of the functional deficits seen in the absence of decorin in aged tendons was associated with altered tendon fibril structure. Fibril diameter distributions in the decorin-null aged tendons were comparable to those observed in the mature wild type tendon with the absence

  2. Mechanical properties of viruses.

    Science.gov (United States)

    de Pablo, Pedro J; Mateu, Mauricio G

    2013-01-01

    Structural biology techniques have greatly contributed to unveil the relationships between structure, properties and functions of viruses. In recent years, classic structural approaches are being complemented by single-molecule techniques such as atomic force microscopy and optical tweezers to study physical properties and functions of viral particles that are not accessible to classic structural techniques. Among these features are mechanical properties such as stiffness, intrinsic elasticity, tensile strength and material fatigue. The field of virus mechanics is contributing to materials science by investigating some physical parameters of "soft" biological matter and biological nano-objects. Virus mechanics studies are also starting to unveil the biological implications of physical properties of viruses. Growing evidence indicate that viruses are subjected to internal and external forces, and that they may have adapted to withstand and even use those forces. This chapter describes what is known on the mechanical properties of virus particles, their structural determinants, and possible biological implications, of which several examples are provided.

  3. Changes in elbow joint's musculo-articular mechanical properties do not alter reaching-related action-perception coupling.

    Science.gov (United States)

    Daviaux, Yannick; Deschamps, Thibault; Cornu, Christophe

    2017-04-01

    Perception of action capabilities can be altered by changes in sensorimotor processes, as showed in previous works in populations dealing with regular and pathological sensorimotor deficits. Misestimating changes in performance ability could lead to risky behavior, injury, and/or reduced performance. However, the relationship between sensorimotor processes, the action-perception coupling, and the related anatomical structures is still a matter of debate. We investigated whether changes in the muscle-tendon system's mechanical properties experimentally induced by eccentric contractions could alter the action-perception coupling (APC) in a reaching-to-grasp task, in which the participants estimated the maximal distance they predicted that they would able to reach a glass. Based on their repartition, volunteers performed a conditioning session the first day: a series of isokinetic elbow extension in passive condition (control group, n = 11) or when performing elbow flexors eccentric contractions (eccentric group, n = 11). Performance estimates and actual performances in a reaching-to-grasp task were completed before, and immediately, 24 hours and 48 hours after the conditioning session. Alterations of musculo-articular mechanical properties were assessed through global joint stiffness (joint passive torque through load/unload cycles) and local stiffness (muscle elastography). The results showed that the APC related to reaching-to-grasp performance was not impacted by post-exercise changes in mechanical properties of the musculo-articular system. These findings emphasize the central dimension of sensorimotor processing instead of peripheral structures to investigate the APC for an altered sensorimotor environment.

  4. Relation of murine thoracic aortic structural and cellular changes with aging to passive and active mechanical properties.

    Science.gov (United States)

    Wheeler, Jason B; Mukherjee, Rupak; Stroud, Robert E; Jones, Jeffrey A; Ikonomidis, John S

    2015-02-25

    Maintenance of the structure and mechanical properties of the thoracic aorta contributes to aortic function and is dependent on the composition of the extracellular matrix and the cellular content within the aortic wall. Age-related alterations in the aorta include changes in cellular content and composition of the extracellular matrix; however, the precise roles of these age-related changes in altering aortic mechanical function are not well understood. Thoracic aortic rings from the descending segment were harvested from C57BL/6 mice aged 6 and 21 months. Thoracic aortic diameter and wall thickness were higher in the old mice. Cellular density was reduced in the medial layer of aortas from the old mice; concomitantly, collagen content was higher in old mice, but elastin content was similar between young and old mice. Stress relaxation, an index of compliance, was reduced in aortas from old mice and correlated with collagen fraction. Contractility of the aortic rings following potassium stimulation was reduced in old versus young mice. Furthermore, collagen gel contraction by aortic smooth muscle cells was reduced with age. These results demonstrate that numerous age-related structural changes occurred in the thoracic aorta and were related to alterations in mechanical properties. Aortic contractility decreased with age, likely because of a reduction in medial cell number in addition to a smooth muscle contractile deficit. Together, these unique findings provide evidence that the age-related changes in structure and mechanical function coalesce to provide an aortic substrate that may be predisposed to aortopathies. © 2015 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley Blackwell.

  5. Prediction of fish body's passive visco-elastic properties and related muscle mechanical performance in vivo during steady swimming

    Science.gov (United States)

    Zhang, Wei; Yu, YongLiang; Tong, BingGang

    2014-01-01

    For attaining the optimized locomotory performance of swimming fishes, both the passive visco-elastic properties of the fish body and the mechanical behavior of the active muscles should coordinate with the fish body's undulatory motion pattern. However, it is difficult to directly measure the visco-elastic constitutive relation and the muscular mechanical performance in vivo. In the present paper, a new approach based on the continuous beam model for steady swimming fish is proposed to predict the fish body's visco-elastic properties and the related muscle mechanical behavior in vivo. Given the lateral travelling-wave-like movement as the input condition, the required muscle force and the energy consumption are functions of the fish body's visco-elastic parameters, i.e. the Young's modulus E and the viscosity coefficient µ in the Kelvin model. After investigating the variations of the propagating speed of the required muscle force with the fish body's visco-elastic parameters, we analyze the impacts of the visco-elastic properties on the energy efficiencies, including the energy utilization ratios of each element of the kinematic chain in fish swimming and the overall efficiency. Under the constraints of reasonable wave speed of muscle activation and the physiological feasibility, the optimal design of the passive visco-elastic properties can be predicted aiming at maximizing the overall efficiency. The analysis is based on the small-amplitude steady swimming of the carangiform swimmer, with typical Reynolds number varying from 2.5×104 to 2.5×105, and the present results show that the non-dimensional Young's modulus is 112±34, and the non-dimensional viscosity coefficient is 13 approximately. In the present estimated ranges, the overall efficiency of the swimming fish is insensitive to the viscosity, and its magnitude is about 0.11±0.02, in the predicted range given by previous study.

  6. Moisture-related mechanical properties of softwood: 3D micromechanical modeling

    DEFF Research Database (Denmark)

    Qing, Hai; Mishnaevsky, Leon

    2009-01-01

    Computational micromechanical analysis of the influence of moisture, density and microstructure of latewood on its hydroelastic and shrinkage properties is carried out. The elastic properties of cell sublayers have been determined using the unit cell models as for fiber reinforced composites (two...... increase with increasing MFAs in layer S2, while the reverse is true in the transverse plane. The shrinkage coefficients of wood depend strongly on the shape of the hexagon-shaped cells. Wood density has a strong effect on both the Young’s modulus and the transverse Young’s modulus....

  7. Microstructure and mechanical properties relation in cold rolled Al 2024 alloy determined by X-ray line profile analysis

    Energy Technology Data Exchange (ETDEWEB)

    Mirzaei, M.; Roshan, M.R., E-mail: mammadroshan@yahoo.com; Jenabali Jahromi, S.A.

    2015-01-03

    Solution treated aluminum 2024 alloy sheets were subjected to rolling at room and cryogenic temperatures. Aging time and mechanical properties were evaluated by microhardness measurements and tensile test, respectively. Microstructural parameters were assessed by applying modified Williamson–Hall and modified Warren–Averbach methods to the X-ray diffraction patterns. Interestingly, the mechanical behavior of the different as-rolled and post-roll aged samples was in correlation with the sub-grain sizes and dislocation densities. The sub-grain sizes of the as-rolled samples were smaller than 40 nm, and the dislocation densities were larger than 7.7×10{sup 15} m{sup −2}, which is related to the high strength of the as-rolled samples. After aging treatment, the ductility of the rolled samples increased significantly, this was justified by the decline in the dislocation density.

  8. The interface bonding mechanism and related mechanical properties of Mg/Al compound materials fabricated by insert molding

    Energy Technology Data Exchange (ETDEWEB)

    Liu, J.C.; Hu, J.; Nie, X.Y. [State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083 (China); Li, H.X., E-mail: hxli@skl.ustb.edu.cn [State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083 (China); Du, Q. [SINTEF Materials and Chemistry, Trondheim (Norway); Zhang, J.S.; Zhuang, L.Z. [State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083 (China)

    2015-05-21

    To overcome the shortcomings of magnesium alloys such as low strength at an elevated temperature and poor corrosion resistance, the fabrication of Mg/Al compound materials has attracted more and more attention in the recent years. Among the various fabrication methods such as diffusion bonding, friction-stir welding, and fusion welding, insert molding technique has shown some advantages such as low production cost, short processing time and the ability of producing complex shape. However, there are only a few documents about this preparation method. In this paper, the corresponding study is carried out via inserting 6061 aluminum alloy into AZ31 magnesium alloy melt. The interface bonding mechanism and its mechanical behavior are investigated as well. It has been found that a good metallurgical bonding can be formed at the interface, which consists of three layers, i.e., Al{sub 3}Mg{sub 2}, Al{sub 12}Mg{sub 17}, and Al{sub 12}Mg{sub 17}+(Mg) eutectic structure. The average shear strength is 20 MPa, which is close to the reported shear strength of the samples prepared by other methods. This research provides a new insight for the fabrication of Mg/Al compound materials.

  9. The morphology of amputated human teeth and its relation to mechanical properties after restoration treatment

    Science.gov (United States)

    Gugger, Jonas; Krastl, Gabriel; Huser, Marius; Deyhle, Hans; Müller, Bert

    2010-09-01

    The increased susceptibility to fracture of root canal- and post-treated teeth is less affected by alterations of the dentin structure, but seems to crucially depend on the loss of coronal tooth substance. The surface, available for adhesion of the composite material in the root canal and in the coronal part of the tooth, is assumed to be of key importance for the fracture resistance. Thus, an appropriate three-dimensional method should be identified to determine the adhesive surface with necessary precision. For this purpose, severely decayed teeth were simulated decapitating clinical crowns. After root canal filling and post space preparation, impressions of the root canal and the amputation surface were obtained using silicone. Micro computed tomography scans of these impressions were acquired. For one selected specimen, an additional high-resolution scan was recorded at a synchrotron radiation source. Software of ImageLab served for the extraction of the amputation interface, the post surface and the post volume from the tomography data, which have been finally correlated with the Young's modulus and the maximal load derived from mechanical tests. The morphological parameters show a realistic relationship to the mechanical tests performed after the restoration treatments and are consequently important for improving the dental skills.

  10. Effects of drying temperature and relative humidity on the mechanical properties of amaranth flour films plasticized with glycerol

    Directory of Open Access Journals (Sweden)

    D. Tapia-Blácido

    2005-06-01

    Full Text Available Biofilms are made of biopolymers. In the casting technique, biofilms are obtained by the drying of a polymer suspension in the final stage of processing. The aim of the present paper was to analyze the effect of this drying process on the mechanical properties of films produced with amaranth flour. Variables considered include glycerol content (30, 35 and 40%, g/g dry flour and air-drying conditions (air temperatures of 30, 40 and 50ºC and relative humidities of 40, 55 and 70%. As amaranth flour films constitute a complex mixture of amylopectin and amylose as well as native protein and lipid, certain unexpected results were obtained. The toughest films were obtained at the lowest temperature and the lowest relative humidity (30ºC, 40%.

  11. Definition of Terms Relating to the Non-Ultimate Mechanical Properties of Polymers, VII.4

    OpenAIRE

    Kozak, D.; M. Lucić

    2009-01-01

    The basic definitions of terms related to the elastic and viscoelastic behaviour of different kinds of bulk polymers, which are often in everyday use, have been given clearly in this IUPAC Recommendations. The document gives basic explanations of physical quantities with corresponding mathematical expressions for elastic solids, such as stress tensor, deformation tensor, deformation gradient, deformation ratio, shear of an elastic solid etc., but also for viscoelastic liquids or solids, such ...

  12. Mechanical properties of ceramics

    CERN Document Server

    Pelleg, Joshua

    2014-01-01

    This book discusses the mechanical properties of ceramics and aims to provide both a solid background for undergraduate students, as well as serving as a text to bring practicing engineers up to date with the latest developments in this topic so they can use and apply these to their actual engineering work.  Generally, ceramics are made by moistening a mixture of clays, casting it into desired shapes and then firing it to a high temperature, a process known as 'vitrification'. The relatively late development of metallurgy was contingent on the availability of ceramics and the know-how to mold them into the appropriate forms. Because of the characteristics of ceramics, they offer great advantages over metals in specific applications in which hardness, wear resistance and chemical stability at high temperatures are essential. Clearly, modern ceramics manufacturing has come a long way from the early clay-processing fabrication method, and the last two decades have seen the development of sophisticated technique...

  13. Relation of martensite-retained austenite and its effect on microstructure and mechanical properties of the quenched and partitioned steels

    Institute of Scientific and Technical Information of China (English)

    WANG CunYu; CHANG Ying; LI XiaoDong; ZHAO KunMin; DONG Han

    2016-01-01

    A two-step quenching and partitioning (Q&P) treatment was applied to low-carbon alloy steels.The relation of initial martensite-retained austenite-fresh martensite and its effect on microstructure and mechanical properties were investigated by experiments.The results reveal that the volume fraction of retained austenite can reach the peak value of 17%,and the corresponding volume fractions of initial martensite and fresh martensite are 40% and 43%,respectively,when the tested steel is treated by initial quenching at 330℃,partitioning at 500℃ for 60s and final quenching to room temperature.Moreover,the micromorphologies of austenite and martensite become finer with the increasing of initial martensite fraction.The elongation is the highest when the volume fractions of initial martensite and retained austenite are 70% and 11%,respectively,meanwhile,the yield strength increases and tensile strength decreases gradually with the increase of initial martensite fraction,which proves that the mechanical properties including elongation,yield strength and tensile strength are based on the comprehensive effect of the retained austenite fraction,the finer microstructure and austenite stability.

  14. Relation between interfacial structure and mechanical properties in AlN/TiN bilayers investigated by EXAFS

    Energy Technology Data Exchange (ETDEWEB)

    Ersen, O. [Equipe de Recherche Mecanique, Materiaux et Procedes de Fabrication, 61, rue Albert Camus, F-68093 Mulhouse (France)]. E-mail: ovidiu.ersen@ipcms.u-strasbg.fr; Tuilier, M.-H. [Equipe de Recherche Mecanique, Materiaux et Procedes de Fabrication, 61, rue Albert Camus, F-68093 Mulhouse (France); Thobor-Keck, A. [Centre de Recherche sur les Ecoulements les Surfaces et les Transferts (UMR CNRS 6000), ITSFC, 4, place Tharradin, BP 71427, F-25211 Montbeliard (France); Rousselot, C. [Centre de Recherche sur les Ecoulements les Surfaces et les Transferts (UMR CNRS 6000), ITSFC, 4, place Tharradin, BP 71427, F-25211 Montbeliard (France); Cortes, R. [Laboratoire de Physique de la Matiere Condensee (UMR CNRS 7643), Ecole Polytechnique, F-91128 Palaiseau cedex (France)

    2005-06-01

    The relation between the mechanical properties and the structure of AlN/TiN bilayers prepared by reactive magnetron sputtering in the 600 nm range is investigated. Al and Ti K-edge extended X-ray absorption fine structure is used in order to determine the local order around Al and Ti by comparison with 300 nm thick AlN and TiN single layers. The use of this powerful local probe allows the evidence of intermixing between AlN and TiN deposited layers, which is suggested by glow discharge optical emission spectroscopy experiments. The effect of ionic bombardment applied at various steps of the deposition process is studied. The ionic bombardment applied during the deposit induces substantial changes in the absorption spectra that are assigned to a decrease of intermixing and an improvement of local order. Simulations of (Al, Ti)N ternary alloys Al and Ti K-edge absorption spectra for increasing mean occupation factors C {sub Ti} (C {sub Al}) of Ti(Al) substituting Al(Ti) in hexagonal AlN (cubic TiN) lattice are performed in order to determine the initial parameters for the fit of the experimental data. The refinements performed by using FEFFIT software demonstrate that an ionic bombardment applied during the deposition phase results in a significant reduction of the number of Al-Ti pairs within the bilayer and an improvement of the local order around Ti and Al, which is quantified by a decrease of the Debye-Waller parameters. This structural evolution is tentatively correlated with the improvement of mechanical properties of the bilayers.

  15. Mechanical Properties of Cells

    Science.gov (United States)

    Bradley, Robert; Becerril, Joseph; Jeevarajan, Anthony

    2007-01-01

    Many physiologic and pathologic processes alter the biomechanical properties of the tissue they affect, and these changes may be manifest at the single cell level. The normal and abnormal mechanical properties of a given cell type can be established with the aid of an atomic force microscope (AFM), nonetheless, consistency in the area of the tip has been a mayor limitation of using the AFM for quantitative measurements of mechanical properties. This project attempts to overcome this limitation by using materials with a known elastic modulus, which resembles the one of the cell, to create force-deformation curves to calculate the area of indentation by means of Hooke s Law (sigma = E(epsilon)), which states that stress (sigma) is proportional to the strain (epsilon) where the constant of proportionality, E, is called the Young s modulus, also referred as the elastic modulus. Hook s Law can be rearranged to find the area of indentation (Area= Force/ E(epsilon)), where the indentation force is defined by the means of the added mass spring calibration method.

  16. Mechanical Properties of Cells

    Science.gov (United States)

    Bradley, Robert; Becerril, Joseph; Jeevarajan, Anthony

    2007-01-01

    Many physiologic and pathologic processes alter the biomechanical properties of the tissue they affect, and these changes may be manifest at the single cell level. The normal and abnormal mechanical properties of a given cell type can be established with the aid of an atomic force microscope (AFM), nonetheless, consistency in the area of the tip has been a mayor limitation of using the AFM for quantitative measurements of mechanical properties. This project attempts to overcome this limitation by using materials with a known elastic modulus, which resembles the one of the cell, to create force-deformation curves to calculate the area of indentation by means of Hooke s Law (sigma = E(epsilon)), which states that stress (sigma) is proportional to the strain (epsilon) where the constant of proportionality, E, is called the Young s modulus, also referred as the elastic modulus. Hook s Law can be rearranged to find the area of indentation (Area= Force/ E(epsilon)), where the indentation force is defined by the means of the added mass spring calibration method.

  17. Microstructure and mechanical properties of hard zone in friction stir welded X80 pipeline steel relative to different heat input

    Energy Technology Data Exchange (ETDEWEB)

    Aydin, Hakan, E-mail: hakanay@uludag.edu.tr [Engineering and Architecture Faculty, Mechanical Engineering Department, Uludag University, 16059 Gorukle-Bursa (Turkey); Nelson, Tracy W. [Mechanical Engineering Department, Brigham Young University, 435 CTB, Provo, UT 84602 (United States)

    2013-12-01

    The study was conducted to investigate the microstructure and mechanical properties of the hard zone in friction stir welded X80 pipeline steel at different heat inputs. Microstructural analysis of the welds was carried out using optical microscopy, transmission electron microscopy, and microhardness. Heat input during friction stir welding process had a significant influence on the microstructure and mechanical properties in the hard zone along the advancing side of the weld nugget. Based on the results, the linear relationships between heat input and post-weld microstructures and mechanical properties in the hard zone of friction stir welded X80 steels were established. It can be concluded that with decrease in heat input the bainitic structure in the hard zone becomes finer and so hard zone strength increases.

  18. Synthesis and characterization of polyurethane/bentonite nanoclay based nanocomposites using different diisocyanates: relation between mechanical and thermal properties

    Science.gov (United States)

    Bocchio, Javier; Wittemberg, Víctor; Quagliano, Javier

    2017-05-01

    Polyurethanes (PUs) and polyurethane nanocomposites (PUNC) with bentonite nanoclay were prepared by the reaction of toluene-2,4-diisocyanate (TDI), dimeryl diisocyanate (DDI) and isophorone diisocyanate (IPDI) with two different polymers: hydroxyl terminated polybutadiene (HTPB) and polytetramethylene ether glycol (PTMEG), and the chains were further extended with 1,4-butanediol (1,4-BDO) to get final PUs and PUNCs. PUNCs were prepared by dispersing within the polymers a commercial and a synthesized bentonite nanoclay by mechanical dispersion. Mechanical properties showed that the addition of a small amount of nanoclay resulted in a significant increase in tensile strength and reduction in elongation at break (maximum increase of 2.3 and 5-times reduction, respectively, for a HTPB-TDI-BDO PUNCs). Thermal analysis revealed that the addition of nanoclays improved the thermal stability and increased decomposition temperature of PUNCs. We concluded that there is a positive correlation between mechanical and thermal properties as a result of nanoclay addition.

  19. Mechanical Properties of Composite Materials

    Directory of Open Access Journals (Sweden)

    Mitsuhiro Okayasu

    2014-10-01

    Full Text Available An examination has been made of the mechanical and failure properties of several composite materials, such as a short and a long carbon fiber reinforced plastic (short- and long-CFRP and metal based composite material. The short CFRP materials were used for a recycled CFRP which fabricated by the following process: the CFRP, consisting of epoxy resin with carbon fiber, is injected to a rectangular plate cavity after mixing with acrylonitrile butadiene styrene resin with different weight fractions of CFRP. The fatigue and ultimate tensile strength (UTS increased with increasing CFRP content. These correlations, however, break down, especially for tensile strength, as the CFPR content becomes more than 70%. Influence of sample temperature on the bending strength of the long-CFRP was investigated, and it appears that the strength slightly decreases with increasing the temperature, due to the weakness in the matrix. Broken fiber and pull-out or debonding between the fiber and matrix were related to the main failure of the short- and long-CFRP samples. Mechanical properties of metal based composite materials have been also investigated, where fiber-like high hardness CuAl2 structure is formed in aluminum matrix. Excellent mechanical properties were obtained in this alloy, e.g., the higher strength and the higher ductility, compared tothe same alloy without the fiber-like structure. There are strong anisotropic effects on the mechanical properties due to the fiber-like metal composite in a soft Al based matrix.

  20. Mechanical Properties of Materials

    CERN Document Server

    Pelleg, Joshua

    2013-01-01

    The subject of mechanical behavior has been in the front line of basic studies in engineering curricula for many years.  This textbook was written for engineering students with the aim of presenting, in a relatively simple manner, the basic concepts of mechanical behavior in solid materials. A second aim of the book is to guide students in their laboratory experiments by helping them to understand their observations in parallel with the lectures of their various courses; therefore the first chapter of the book is devoted to mechanical testing. Another aim of the book is to provide practicing engineers with basic help to bridge the gap of time that has passed from their graduation up to their actual involvement in engineering work. The book also serves as the basis for more advanced studies and seminars when pursuing courses on a graduate level. The content of this textbook and the topics discussed correspond to courses that are usually taught in universities and colleges all over the world, but with a differ...

  1. Mechanical Property of Foamed Metal

    Institute of Scientific and Technical Information of China (English)

    LIU Pei-sheng; SANG Hai-bo

    2004-01-01

    A comprehensive study on the mechanical behavior of foamed metals was demonstrated. The relationship among their mechanical properties, preparation method, porosity and the structure was briefly studied as well.

  2. Mechanical Properties of Niobium Cavities

    Energy Technology Data Exchange (ETDEWEB)

    Ciovati, Gianluigi [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Dhakal, Pashupati [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Matalevich, Joseph R. [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Myneni, Ganapati Rao [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States)

    2015-09-01

    The mechanical stability of bulk Nb cavity is an important aspect to be considered in relation to cavity material, geometry and treatments. Mechanical properties of Nb are typically obtained from uniaxial tensile tests of small samples. In this contribution we report the results of measurements of the resonant frequency and local strain along the contour of single-cell cavities made of ingot and fine-grain Nb of different purity subjected to increasing uniform differential pressure, up to 6 atm. Measurements have been done on cavities subjected to different heat treatments. Good agreement between finite element analysis simulations and experimental data in the elastic regime was obtained with a single set of values of Young’s modulus and Poisson’s ratio. The experimental results indicate that the yield strength of medium-purity ingot Nb cavities is higher than that of fine-grain, high-purity Nb.

  3. Analytical mechanics for relativity and quantum mechanics

    CERN Document Server

    Johns, Oliver Davis

    2011-01-01

    Analytical Mechanics for Relativity and Quantum Mechanics is an innovative and mathematically sound treatment of the foundations of analytical mechanics and the relation of classical mechanics to relativity and quantum theory. It is intended for use at the introductory graduate level. A distinguishing feature of the book is its integration of special relativity into teaching of classical mechanics. After a thorough review of the traditional theory, Part II of the book introduces extended Lagrangian and Hamiltonian methods that treat time as a transformable coordinate rather than the fixed parameter of Newtonian physics. Advanced topics such as covariant Langrangians and Hamiltonians, canonical transformations, and Hamilton-Jacobi methods are simplified by the use of this extended theory. And the definition of canonical transformation no longer excludes the Lorenz transformation of special relativity. This is also a book for those who study analytical mechanics to prepare for a critical exploration of quantum...

  4. Glaucoma-related Changes in the Mechanical Properties and Collagen Micro-architecture of the Human Sclera.

    Directory of Open Access Journals (Sweden)

    Baptiste Coudrillier

    Full Text Available The biomechanical behavior of the sclera determines the level of mechanical insult from intraocular pressure to the axons and tissues of the optic nerve head, as is of interest in glaucoma. In this study, we measure the collagen fiber structure and the strain response, and estimate the material properties of glaucomatous and normal human donor scleras.Twenty-two posterior scleras from normal and diagnosed glaucoma donors were obtained from an eyebank. Optic nerve cross-sections were graded to determine the presence of axon loss. The specimens were subjected to pressure-controlled inflation testing. Full-field displacement maps were measured by digital image correlation (DIC and spatially differentiated to compute surface strains. Maps of the collagen fiber structure across the posterior sclera of each inflated specimen were obtained using synchrotron wide-angle X-ray scattering (WAXS. Finite element (FE models of the posterior scleras, incorporating a specimen-specific representation of the collagen structure, were constructed from the DIC-measured geometry. An inverse finite element analysis was developed to estimate the stiffness of the collagen fiber and inter-fiber matrix.The differences between glaucoma and non-glaucoma eyes were small in magnitude. Sectorial variations of degree of fiber alignment and peripapillary scleral strain significantly differed between normal and diagnosed glaucoma specimens. Meridional strains were on average larger in diagnosed glaucoma eyes compared with normal specimens. Non-glaucoma specimens had on average the lowest matrix and fiber stiffness, followed by undamaged glaucoma eyes, and damaged glaucoma eyes but the differences in stiffness were not significant.The observed biomechanical and microstructural changes could be the result of tissue remodeling occuring in glaucoma and are likely to alter the mechanical environment of the optic nerve head and contribute to axonal damage.

  5. The mechanical properties of fast and slow skeletal muscles of the mouse in relation to their locomotory function.

    Science.gov (United States)

    James, R S; Altringham, J D; Goldspink, D F

    1995-02-01

    The mechanical properties of soleus and extensor digitorum longus (EDL) muscles from the mouse were studied using the work loop technique. Under optimum conditions, the EDL produced a maximum mean power output of 107 W kg-1 at a cycle frequency of 10 Hz. In comparison, the maximum mean power output of the soleus was 34 W kg-1 at 5 Hz cycle frequency. Video analysis of mice determined the stride frequency range to be from 2.87 Hz at a walk to 8.23 Hz at a flat-out gallop, with the trot-to-gallop transition occurring at 5.89 Hz. In vivo EDL electromyogram (EMG) activity is recorded primarily during shortening and the muscle operates in a power-generating mode. The soleus is close to isometric when EMG activity is recorded, but mechanical activity persists into the shortening phase. Both muscles are likely to operate over cycle frequency ranges just below, or at, those yielding maximal power. Soleus and EDL produced maximal power output in vitro when operating at mean sarcomere lengths of 2.58 microns and 2.71 microns respectively. These lengths are slightly above the plateau of the length-force curve predicted for rat leg muscle (2.3-2.5 microns). The sarcomere length ranges used in vivo by the soleus and EDL were determined, by fixing muscles in the extreme active positions predicted from video and cine analysis, to be 2.28-2.57 microns and 2.49-2.88 microns respectively. These ranges are both close to those shown to yield maximum power output in vitro and to the plateau of the sarcomere length-force curve.

  6. MECHANICAL PROPERTIES OF WROUGHT TUNGSTEN

    Science.gov (United States)

    Mechanical properties of wrought tungsten vol. II. Creep rupture test data from 1500 to 5000 F, and tensile test data from room temperature to 5000 F at various strain rates for tungsten sheet material.

  7. Phenotypic screening of Arabidopsis T-DNA insertion lines for cell wall mechanical properties revealed ANTHOCYANINLESS2, a cell wall-related gene.

    Science.gov (United States)

    Mabuchi, Atsushi; Soga, Kouichi; Wakabayashi, Kazuyuki; Hoson, Takayuki

    2016-02-01

    We performed a phenotypic screening of confirmed homozygous T-DNA insertion lines in Arabidopsis for cell wall extensibility, in an attempt to identify genes involved in the regulation of cell wall mechanical properties. Seedlings of each line were cultivated and the cell wall extensibility of their hypocotyls was measured with a tensile tester. Hypocotyls of lines with known cell wall-related genes showed higher or lower extensibility than those of the wild-type at high frequency, indicating that the protocol used was effective. In the first round of screening of randomly selected T-DNA insertion lines, we identified ANTHOCYANINLESS2 (ANL2), a gene involved in the regulation of cell wall mechanical properties. In the anl2 mutant, the cell wall extensibility of hypocotyls was significantly lower than that of the wild-type. Levels of cell wall polysaccharides per hypocotyl, particularly cellulose, increased in anl2. Microarray analysis showed that in anl2, expression levels of the major peroxidase genes also increased. Moreover, the activity of ionically wall-bound peroxidases clearly increased in anl2. The activation of peroxidases as well as the accumulation of cell wall polysaccharides may be involved in decreased cell wall extensibility. The approach employed in the present study could contribute to our understanding of the mechanisms underlying the regulation of cell wall mechanical properties.

  8. Mechanical Properties of Picea sitchensis

    DEFF Research Database (Denmark)

    Bräuner, Lise; Hoffmeyer, Preben; Poulsson, Lise

    2000-01-01

    the requirements at the same level as Danish grown Norway spruce. The study shows that Sitka spruce and Norway spruce of the same origin exhibit highly comparable mechanical properties. Key words: annual ring width, bending strength, characteristic strength, dry density, EN 338, INSTA 142, modulus of elasticity...

  9. Variation in the mechanical properties of flight feathers of the blackcap Sylvia atricapilla in relation to migration

    NARCIS (Netherlands)

    De la Hera, I.; Hedenström, A.; Pérez-Tris, J.; Tellería, J.L.

    2010-01-01

    Migration causes temporal and energetic constraints during plumage development, which can compromise feather structure and function. In turn, given the importance of a good quality of flight feathers in migratory movements, selection may have favoured the synthesis of feathers with better mechanical

  10. STRENGTH AND RELATED PROPERTIES OF WHITE FIR,

    Science.gov (United States)

    WOOD, PHYSICAL PROPERTIES, TREES, STRENGTH (PHYSIOLOGY), GROWTH(PHYSIOLOGY), MECHANICAL PROPERTIES, ELASTIC PROPERTIES, HARDNESS, TOUGHNESS, SHEAR STRESSES, COMPRESSIVE PROPERTIES, TABLES(DATA), CALIFORNIA, OREGON.

  11. On the Relative Relevance of Subject-Specific Geometries and Degeneration-Specific Mechanical Properties for the Study of Cell Death in Human Intervertebral Disk Models

    Science.gov (United States)

    Malandrino, Andrea; Pozo, José M.; Castro-Mateos, Isaac; Frangi, Alejandro F.; van Rijsbergen, Marc M.; Ito, Keita; Wilke, Hans-Joachim; Dao, Tien Tuan; Ho Ba Tho, Marie-Christine; Noailly, Jérôme

    2015-01-01

    Capturing patient- or condition-specific intervertebral disk (IVD) properties in finite element models is outmost important in order to explore how biomechanical and biophysical processes may interact in spine diseases. However, disk degenerative changes are often modeled through equations similar to those employed for healthy organs, which might not be valid. As for the simulated effects of degenerative changes, they likely depend on specific disk geometries. Accordingly, we explored the ability of continuum tissue models to simulate disk degenerative changes. We further used the results in order to assess the interplay between these simulated changes and particular IVD morphologies, in relation to disk cell nutrition, a potentially important factor in disk tissue regulation. A protocol to derive patient-specific computational models from clinical images was applied to different spine specimens. In vitro, IVD creep tests were used to optimize poro-hyperelastic input material parameters in these models, in function of the IVD degeneration grade. The use of condition-specific tissue model parameters in the specimen-specific geometrical models was validated against independent kinematic measurements in vitro. Then, models were coupled to a transport-cell viability model in order to assess the respective effects of tissue degeneration and disk geometry on cell viability. While classic disk poro-mechanical models failed in representing known degenerative changes, additional simulation of tissue damage allowed model validation and gave degeneration-dependent material properties related to osmotic pressure and water loss, and to increased fibrosis. Surprisingly, nutrition-induced cell death was independent of the grade-dependent material properties, but was favored by increased diffusion distances in large IVDs. Our results suggest that in situ geometrical screening of IVD morphology might help to anticipate particular mechanisms of disk degeneration. PMID:25717471

  12. On the relative relevance of subject-specific geometries and degeneration-specific mechanical properties for the study of cell death in human intervertebral disk models.

    Science.gov (United States)

    Malandrino, Andrea; Pozo, José M; Castro-Mateos, Isaac; Frangi, Alejandro F; van Rijsbergen, Marc M; Ito, Keita; Wilke, Hans-Joachim; Dao, Tien Tuan; Ho Ba Tho, Marie-Christine; Noailly, Jérôme

    2015-01-01

    Capturing patient- or condition-specific intervertebral disk (IVD) properties in finite element models is outmost important in order to explore how biomechanical and biophysical processes may interact in spine diseases. However, disk degenerative changes are often modeled through equations similar to those employed for healthy organs, which might not be valid. As for the simulated effects of degenerative changes, they likely depend on specific disk geometries. Accordingly, we explored the ability of continuum tissue models to simulate disk degenerative changes. We further used the results in order to assess the interplay between these simulated changes and particular IVD morphologies, in relation to disk cell nutrition, a potentially important factor in disk tissue regulation. A protocol to derive patient-specific computational models from clinical images was applied to different spine specimens. In vitro, IVD creep tests were used to optimize poro-hyperelastic input material parameters in these models, in function of the IVD degeneration grade. The use of condition-specific tissue model parameters in the specimen-specific geometrical models was validated against independent kinematic measurements in vitro. Then, models were coupled to a transport-cell viability model in order to assess the respective effects of tissue degeneration and disk geometry on cell viability. While classic disk poro-mechanical models failed in representing known degenerative changes, additional simulation of tissue damage allowed model validation and gave degeneration-dependent material properties related to osmotic pressure and water loss, and to increased fibrosis. Surprisingly, nutrition-induced cell death was independent of the grade-dependent material properties, but was favored by increased diffusion distances in large IVDs. Our results suggest that in situ geometrical screening of IVD morphology might help to anticipate particular mechanisms of disk degeneration.

  13. Mechanical properties of graphene nanoribbons

    Energy Technology Data Exchange (ETDEWEB)

    Faccio, Ricardo; Pardo, Helena; Goyenola, Cecilia; Mombru, Alvaro W [Crystallography, Solid State and Materials Laboratory (Cryssmat-Lab), DETEMA, Facultad de Quimica, Universidad de la Republica, Avenida General Flores 2124, PO Box 1157, Montevideo (Uruguay); Denis, Pablo A [Computational Nanotechnology, DETEMA, Facultad de Quimica, Universidad de la Republica, Avenida General Flores 2124, CC 1157, 11800 Montevideo (Uruguay)], E-mail: rfaccio@fq.edu.uy

    2009-07-15

    Herein, we investigate the structural, electronic and mechanical properties of zigzag graphene nanoribbons in the presence of stress by applying density functional theory within the GGA-PBE (generalized gradient approximation-Perdew-Burke-Ernzerhof) approximation. The uniaxial stress is applied along the periodic direction, allowing a unitary deformation in the range of {+-} 0.02%. The mechanical properties show a linear response within that range while a nonlinear dependence is found for higher strain. The most relevant results indicate that Young's modulus is considerable higher than those determined for graphene and carbon nanotubes. The geometrical reconstruction of the C-C bonds at the edges hardens the nanostructure. The features of the electronic structure are not sensitive to strain in this linear elastic regime, suggesting the potential for using carbon nanostructures in nano-electronic devices in the near future.

  14. Mechanical properties of organic nanofibers

    DEFF Research Database (Denmark)

    Kjelstrup-Hansen, Jakob; Hansen, Ole; Rubahn, H.R.

    2006-01-01

    Intrinsic elastic and inelastic mechanical Properties of individual, self-assembled, quasi-single-crystalline para-hexaphenylene nanofibers supported on substrates with different hydrophobicities are investigated as well as the interplay between the fibers and the underlying substrates. We find f...... on a silicon substrate with a low-adhesion coating, whereas such motion on a noncoated substrate is limited to very short (sub-micrometer) nanofiber pieces due to strong adhesive forces....

  15. Mechanical properties of collagen fibrils

    OpenAIRE

    Wenger, M. P. E.; Bozec, L.; Horton, M. A.; Mesquida, P

    2007-01-01

    The formation of collagen fibers from staggered subfibrils still lacks a universally accepted model. Determining the mechanical properties of single collagen fibrils ( diameter 50 - 200 nm) provides new insights into collagen structure. In this work, the reduced modulus of collagen was measured by nanoindentation using atomic force microscopy. For individual type 1 collagen fibrils from rat tail, the modulus was found to be in the range from 5 GPa to 11.5 GPa ( in air and at room temperature)...

  16. Mechanical Properties of Flexographic Prints

    Directory of Open Access Journals (Sweden)

    Simona Grigaliūnienė

    2014-02-01

    Full Text Available Mechanical properties of paper and flexographic prints madewith different anilox rollers were investigated experimentally.Flexographic prints roughness, breaking force and folding resistancevalues were determined. The results showed that foldingresistance is bigger for machine direction prints than for crossmachine direction prints. Flexographic prints on cardboardsfolding resistance values are different for machine direction andcross machine direction. It was determined that roughness offlexographic prints increases with the amount of ink on aniloxroller. Results were explained by the ink water influence.

  17. Stainless Steel Microstructure and Mechanical Properties Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Switzner, Nathan T

    2010-06-01

    A nitrogen strengthened 21-6-9 stainless steel plate was spinformed into hemispherical test shapes. A battery of laboratory tests was used to characterize the hemispheres. The laboratory tests show that near the pole (axis) of a spinformed hemisphere the yield strength is the lowest because this area endures the least “cold-work” strengthening, i.e., the least deformation. The characterization indicated that stress-relief annealing spinformed stainless steel hemispheres does not degrade mechanical properties. Stress-relief annealing reduces residual stresses while maintaining relatively high mechanical properties. Full annealing completely eliminates residual stresses, but reduces yield strength by about 30%.

  18. On the electronic nature of silicon and germanium based oxynitrides and their related mechanical, optical and vibrational properties as obtained from DFT and DFPT

    KAUST Repository

    Goumri-Said, Souraya

    2012-02-01

    Electronic structure, bonding and optical properties of the orthorhombic oxynitrides Si 2N 2O and Ge 2N 2O are studied using the density function theory as implemented in pseudo-potential plane wave and full-potential (linearized) augmented plane wave plus local orbitals methods. Generalized gradient approximation is employed in order to determine the band gap energy. Indeed, the Si 2N 2O exhibits a large direct gap whereas Ge 2N 2O have an indirect one. Bonding is analyzed via the charge densities and Mulliken population, where the role of oxygen is investigated. The analysis of the elastic constants show the mechanical stability of both oxynitrides. Their bulk and shear modulus are slightly smaller than those reported on nitrides semiconductors due to the oxygen presence. The optical properties, namely the dielectric function, optical reflectivity, refractive index and electron energy loss, are reported for radiation up to 30 eV. The phonon dispersion relation, zone-center optical mode frequency, density of phonon states are calculated using the density functional perturbed theory. Thermodynamic properties of Si 2N 2O and Ge 2N 2O, such as heat capacity and Debye temperature, are given for reference. Our study suggests that Si 2N 2O and Ge 2N 2O could be a promising potential materials for applications in the microelectronics and optoelectronics areas of research. © 2011 Elsevier B.V. All rights reserved.

  19. Mechanisms of nitrate capture in biochar: Are they related to biochar properties, post-treatment and soil environment?

    Science.gov (United States)

    Cimo, Giulia; Haller, Andreas; Spokas, Kurt; Novak, Jeff; Ippolito, Jim; Löhnertz, Otmar; Kammann, Claudia

    2017-04-01

    we found (7)that this captured nitrate was well protected against leaching, (8)that repeated drying-wetting cycles increased nitrate capture, with the amount protected against leaching remaining more or less constant; and (9) that an organic "coating" (or application of the nitrate in an organic solution, here: black tea) increased biochars' capability of nitrate capture. Our results thus underline that the phenomenon of nitrate capture is not purely due to ionic mechanisms but may partly rely on physical interactions and the pore structure of the biochar. Acknowledgement: JC acknowledges funding by the COST action TD1107 (short term scientific mission), CK acknowledges the financial support of DFG grant no. Ka3442/1-1 and of the HMWK Hessia funded OptiChar4EcoVin project. 1-Haider, G., Steffens, D., Müller, C. & Kammann, C. I. Standard extraction methods may underestimate nitrate stocks captured by field aged biochar. J. Environ. Qual. 45, 1196-1204 (2016). 2-Kammann, C. I. et al. Plant growth improvement mediated by nitrate capture in co-composted biochar. Scientific Reports 5, doi: 10.1038/srep11080 (2015). 3-Haider, G., Steffens, D., Moser, G., Müller, C. & Kammann, C. I. Biochar reduced nitrate leaching and improved soil moisture content without yield improvements in a four-year field study. Agri. Ecosys. Environ. 237, 80-94 (2017).

  20. On the Process-Related Rivet Microstructural Evolution, Material Flow and Mechanical Properties of Ti-6Al-4V/GFRP Friction-Riveted Joints

    Directory of Open Access Journals (Sweden)

    Natascha Z. Borba

    2017-02-01

    Full Text Available In the current work, process-related thermo-mechanical changes in the rivet microstructure, joint local and global mechanical properties, and their correlation with the rivet plastic deformation regime were investigated for Ti-6Al-4V (rivet and glass-fiber-reinforced polyester (GF-P friction-riveted joints of a single polymeric base plate. Joints displaying similar quasi-static mechanical performance to conventional bolted joints were selected for detailed characterization. The mechanical performance was assessed on lap shear specimens, whereby the friction-riveted joints were connected with AA2198 gussets. Two levels of energy input were used, resulting in process temperatures varying from 460 ± 130 °C to 758 ± 56 °C and fast cooling rates (178 ± 15 °C/s, 59 ± 15 °C/s. A complex final microstructure was identified in the rivet. Whereas equiaxial α-grains with β-phase precipitated in their grain boundaries were identified in the rivet heat-affected zone, refined α′ martensite, Widmanstätten structures and β-fleck domains were present in the plastically deformed rivet volume. The transition from equiaxed to acicular structures resulted in an increase of up to 24% in microhardness in comparison to the base material. A study on the rivet material flow through microtexture of the α-Ti phase and β-fleck orientation revealed a strong effect of shear stress and forging which induced simple shear deformation. By combining advanced microstructural analysis techniques with local mechanical testing and temperature measurement, the nature of the complex rivet plastic deformational regime could be determined.

  1. Mechanical properties of metal dihydrides

    Science.gov (United States)

    Schultz, Peter A.; Snow, Clark S.

    2016-03-01

    First-principles calculations are used to characterize the bulk elastic properties of cubic and tetragonal phase metal dihydrides, \\text{M}{{\\text{H}}2} {\\text{M}   =  Sc, Y, Ti, Zr, Hf, lanthanides} to gain insight into the mechanical properties that govern the aging behavior of rare-earth di-tritides as the constituent 3H, tritium, decays into 3He. As tritium decays, helium is inserted in the lattice, the helium migrates and collects into bubbles, that then can ultimately create sufficient internal pressure to rupture the material. The elastic properties of the materials are needed to construct effective mesoscale models of the process of bubble growth and fracture. Dihydrides of the scandium column and most of the rare-earths crystalize into a cubic phase, while dihydrides from the next column, Ti, Zr, and Hf, distort instead into the tetragonal phase, indicating incipient instabilities in the phase and potentially significant changes in elastic properties. We report the computed elastic properties of these dihydrides, and also investigate the off-stoichiometric phases as He or vacancies accumulate. As helium builds up in the cubic phase, the shear moduli greatly soften, converting to the tetragonal phase. Conversely, the tetragonal phases convert very quickly to cubic with the removal of H from the lattice, while the cubic phases show little change with removal of H. The source and magnitude of the numerical and physical uncertainties in the modeling are analyzed and quantified to establish the level of confidence that can be placed in the computational results, and this quantified confidence is used to justify using the results to augment and even supplant experimental measurements.

  2. Collagen thermal denaturation study for thermal angioplasty based on modified kinetic model: relation between the artery mechanical properties and collagen denaturation rate

    Science.gov (United States)

    Shimazaki, N.; Hayashi, T.; Kunio, M.; Arai, T.

    2010-02-01

    We have been developing the novel short-term heating angioplasty in which sufficient artery lumen-dilatation was attained with thermal softening of collagen fiber in artery wall. In the present study, we investigated on the relation between the mechanical properties of heated artery and thermal denaturation fractures of arterial collagen in ex vivo. We employed Lumry-Eyring model to estimate temperature- and time-dependent thermal denaturation fractures of arterial collagen fiber during heating. We made a kinetic model of arterial collagen thermal denaturation by adjustment of K and k in this model, those were the equilibrium constant of reversible denaturation and the rate constant of irreversible denaturation. Meanwhile we demonstrated that the change of reduced scattering coefficient of whole artery wall during heating reflected the reversible denaturation of the collagen in artery wall. Based on this phenomenon, the K was determined experimentally by backscattered light intensity measurement (at 633nm) of extracted porcine carotid artery during temperature elevation and descending (25°C-->80°C-->25°C). We employed the value of according to our earlier report in which the time-and temperature- dependent irreversible denaturation amount of the artery collagen fiber that was assessed by the artery birefringence. Then, the time- and temperature- dependent reversible (irreversible) denaturation fraction defined as the reversible ((irreversible) denatured collagen amount) / (total collagen amount) was calculated by the model. Thermo-mechanical analysis of artery wall was performed to compare the arterial mechanical behaviors (softening, shrinkage) during heating with the calculated denaturation fraction with the model. In any artery temperature condition in 70-80°, the irreversible denaturation fraction at which the artery thermal shrinkage started was estimated to be around 20%. On the other hand, the calculated irreversible denaturation fraction remained below

  3. Determination of Some Mechanical Properties of Almond Seed ...

    African Journals Online (AJOL)

    Determination of Some Mechanical Properties of Almond Seed Related to Design of Food ... Nigerian Journal of Technological Development ... The determined engineering properties are vital for the design of postharvest handling and ...

  4. Mechanical Properties of Nanocrystal Supercrystals

    Energy Technology Data Exchange (ETDEWEB)

    Tam, Enrico; Podsiadlo, Paul; Shevchenko, Elena; Ogletree, D. Frank; Delplancke-Ogletree, Marie-Paule; Ashby, Paul D.

    2009-12-30

    Colloidal nanocrystals attract significant interest due to their potential applications in electronic, magnetic, and optical devices. Nanocrystal supercrystals (NCSCs) are particularly appealing for their well ordered structure and homogeneity. The interactions between organic ligands that passivate the inorganic nanocrystal cores critically influence their self-organization into supercrystals, By investigating the mechanical properties of supercrystals, we can directly characterize the particle-particle interactions in a well-defined geometry, and gain insight into both the self-assembly process and the potential applications of nanocrystal supercrystals. Here we report nanoindentation studies of well ordered lead-sulfide (Pbs) nanocrystal supercrystals. Their modulus and hardness were found to be similar to soft polymers at 1.7 GPa and 70 MPa respectively and the fractures toughness was 39 KPa/m1/2, revealing the extremely brittle nature of these materials.

  5. Mechanical properties of polyethylene foils

    Directory of Open Access Journals (Sweden)

    Ľubomír KUBÍK

    2014-03-01

    Full Text Available The paper deals with the evaluation of the mechanical properties of the polyethylene foils such as the stress, strain, modulus of elasticity and stress and strain in the moment of breaking. The thin foils (50 mm which contained 91 % of polyethylene Bralen RA 2–63 and 9 % colored concentrate Maxithen were studied. Four sorts of foils were examined: Maxithen HP 1510 – white, Maxithen HP 231111 – yellow, Maxithen HP 533031 – blue and Maxithen HP 533 041 – violet. Longitudinal and transversal tensile properties were studied. The tensile behavior was monitored on the motorized test stand ANDILOG STENTOR 1000. The moduli of elasticity of longitudinal samples of polyethylene Bralen RA 2—63 foils achieved the values in the range from 222.73 MPa to 298.24 MPa and the transversal samples in the range 179.61 MPa to 270.41 MPa. The stress of longitudinal samples of polyethylene Bralen RA 2–63 foils in the moment of the rupture achieved the values in the range from 9.46 MPa to 13.33 MPa at the strain from 1.51 mm*mm–1 to 1.54 mm*mm–1 and the transversal samples in the range from 12.38 MPa to 15.54 MPa at the strain from 1.48 mm*mm–1 to 1.58 mm*mm–1.

  6. Mechanical properties of additively manufactured octagonal honeycombs.

    Science.gov (United States)

    Hedayati, R; Sadighi, M; Mohammadi-Aghdam, M; Zadpoor, A A

    2016-12-01

    Honeycomb structures have found numerous applications as structural and biomedical materials due to their favourable properties such as low weight, high stiffness, and porosity. Application of additive manufacturing and 3D printing techniques allows for manufacturing of honeycombs with arbitrary shape and wall thickness, opening the way for optimizing the mechanical and physical properties for specific applications. In this study, the mechanical properties of honeycomb structures with a new geometry, called octagonal honeycomb, were investigated using analytical, numerical, and experimental approaches. An additive manufacturing technique, namely fused deposition modelling, was used to fabricate the honeycomb from polylactic acid (PLA). The honeycombs structures were then mechanically tested under compression and the mechanical properties of the structures were determined. In addition, the Euler-Bernoulli and Timoshenko beam theories were used for deriving analytical relationships for elastic modulus, yield stress, Poisson's ratio, and buckling stress of this new design of honeycomb structures. Finite element models were also created to analyse the mechanical behaviour of the honeycombs computationally. The analytical solutions obtained using Timoshenko beam theory were close to computational results in terms of elastic modulus, Poisson's ratio and yield stress, especially for relative densities smaller than 25%. The analytical solutions based on the Timoshenko analytical solution and the computational results were in good agreement with experimental observations. Finally, the elastic properties of the proposed honeycomb structure were compared to those of other honeycomb structures such as square, triangular, hexagonal, mixed, diamond, and Kagome. The octagonal honeycomb showed yield stress and elastic modulus values very close to those of regular hexagonal honeycombs and lower than the other considered honeycombs.

  7. Age- and gender-related distribution of bone mineral density and mechanical properties of the proximal humerus; Alters- und geschlechtsabhaengige Knochenmineraldichteverteilung und mechanische Eigenschaften des proximalen Humerus

    Energy Technology Data Exchange (ETDEWEB)

    Lill, H.; Hepp, P.; Korner, J.; Josten, C. [Klinik fuer Unfall- und Wiederherstellungschirurgie, Univ. Leipzig (Germany); Gowin, W. [Center of Muscle and Bone Research, Klinik fuer Radiologie und Nuklearmedizin, Universitaetsklinikum Benjamin Franklin, Freie Univ. Berlin (Germany); Oestmann, J.W. [Klinik fuer Radiologie, Charite, Virchow-Klinikum, Humboldt Univ., Berlin (Germany); Haas, N.P.; Duda, G.N. [Klinik fuer Unfall- und Wiederherstellungschirurgie, Charite, Virchow-Klinikum Humboldt-Univ. Berlin (Germany)

    2002-12-01

    Purpose: To evaluate age- and gender-related mechanical properties and bone mineral density (BMD) of the proximal humerus at different levels and regions. Materials and methods: Mechanical indentation testing, DXA, QCT, pQCT and the radiogrammetry (Cortical Index, CI) were carried out in 70 freshly harvested humeri from 46 human cadavers (23 females, 23-males; median age 70.5 years). Results: In the female group, a high correlation between age and BMD was found ({rho}=0.62 to -0.70, p<0.01) with statistically significant differences between specimens of patients 69 years or younger, and 70 years or older (p<0.05). In the group of female specimens of age 70 years or older, BMD values were found to be significantly lower compared to their male counterparts (p<0.05). Regardless of the specimen's age, the highest BMD and bone strength were found in the proximal aspect and in the medial and dorsal regions of the proximal humerus. Conclusion: These findings provide an insight into the fracture mechanism of the proximal humerus and should be the basis for designing structure-oriented implants with improved implant-bone stability in osteoporotic patients. (orig.) [German] Ziel: Das Ziel der vorliegenden Studie war die alters- und geschlechtsspezifische Analyse der mechanischen Eigenschaften und der Knochenmineraldichte (BMD) des proximalen Humerus in verschiedenen Hoehen und Regionen. Methoden: Folgende Verfahren wurden angewandt: Mechanische Indentation Testung, DXA, QCT, pQCT und die Radiogrammetrie (Cortical Index, CI). Die Untersuchungen wurden an 70 frischen Humeri von 46 humanen Praeparaten (23 weiblich, 23 maennlich; Alter median: 70,5 Jahre) durchgefuehrt. Ergebnisse: In der Gruppe der weiblichen Humeri fand sich eine hohe Korrelation zwischen Alter und Knochenmineraldichte ({rho}=-0,62 to -0,70 p<0,01) mit statistisch signifikanten Unterschieden zwischen Praeparaten juenger als 69 Jahre und aelter als 70 Jahre (p<0.05). In der Gruppe der weiblichen Praeparate

  8. Mechanical Properties of Nanofilled Polypropylene Composites

    Directory of Open Access Journals (Sweden)

    Cristina-Elisabeta PELIN

    2015-06-01

    Full Text Available The paper presents a study concerning mechanical performance of thermoplastic nanocomposites based on isotactic polypropylene matrix, nanofilled with montmorillonite modified with quaternary ammonium salt and carboxyl functionalized carbon nanotubes, respectively, added in the same concentration relative to the matrix. The nanofilled and single polymer materials were obtained by simple melt compounding through extrusion process followed by injection molding into specific shape specimens for mechanical testing of the samples. Mechanical properties were evaluated by tensile and 3 point bending tests. In terms of modulus of elasticity, the results showed overall positive effects concerning the effect of nanofiller addition to the thermoplastic polymer. The fracture cross section of the tested specimens was characterized by FT-IR spectroscopy and SEM microscopy.

  9. Relating biophysical properties across scales.

    Science.gov (United States)

    Flenner, Elijah; Marga, Francoise; Neagu, Adrian; Kosztin, Ioan; Forgacs, Gabor

    2008-01-01

    A distinguishing feature of a multicellular living system is that it operates at various scales, from the intracellular to organismal. Genes and molecules set up the conditions for the physical processes to act, in particular to shape the embryo. As development continues the changes brought about by the physical processes lead to changes in gene expression. It is this coordinated interplay between genetic and generic (i.e., physical and chemical) processes that constitutes the modern understanding of early morphogenesis. It is natural to assume that in this multiscale process the smaller defines the larger. In case of biophysical properties, in particular, those at the subcellular level are expected to give rise to those at the tissue level and beyond. Indeed, the physical properties of tissues vary greatly from the liquid to solid. Very little is known at present on how tissue level properties are related to cell and subcellular properties. Modern measurement techniques provide quantitative results at both the intracellular and tissue level, but not on the connection between these. In the present work we outline a framework to address this connection. We specifically concentrate on the morphogenetic process of tissue fusion, by following the coalescence of two contiguous multicellular aggregates. The time evolution of this process can accurately be described by the theory of viscous liquids. We also study fusion by Monte Carlo simulations and a novel Cellular Particle Dynamics (CPD) model, which is similar to the earlier introduced Subcellular Element Model (SEM; Newman, 2005). Using the combination of experiments, theory and modeling we are able to relate the measured tissue level biophysical quantities to subcellular parameters. Our approach has validity beyond the particular morphogenetic process considered here and provides a general way to relate biophysical properties across scales.

  10. Research on mechanical properties of corn stalk

    Science.gov (United States)

    Zhang, Kaifei; He, Yujing; Zhang, Hongmei; Li, He

    2017-03-01

    Many domestic scholars have studied on straw utilization from lodging resistance, by breeding agricultural experts to optimization parameters, which selected by agricultural mechanical experts and efficient utilization after the harvest crush. Therefore, the study of the mechanical properties of corn stalks has great prospects. It can provide the basis for the design of agricultural machinery and comprehensive utilization of straw that study the relationship between the properties of the corn stalk and the mechanical properties. In this paper, the radial compression and bending mechanical properties of corn stalk was conducted by universal material testing machine, which contributes to the increase of corn crop and provides basis for the development of equipment.

  11. Relating Biophysical Properties Across Scales

    CERN Document Server

    Flenner, Elijah; Neagu, Adrian; Kosztin, Ioan; Forgacs, Gabor

    2007-01-01

    A distinguishing feature of a multicellular living system is that it operates at various scales, from the intracellular to organismal. Very little is known at present on how tissue level properties are related to cell and subcellular properties. Modern measurement techniques provide quantitative results at both the intracellular and tissue level, but not on the connection between these. In the present work we outline a framework to address this connection. We specifically concentrate on the morphogenetic process of tissue fusion, by following the coalescence of two contiguous multicellular aggregates. The time evolution of this process can accurately be described by the theory of viscous liquids. We also study fusion by Monte Carlo simulations and a novel Cellular Particle Dynamics (CPD) model, which is similar to the earlier introduced Subcellular Element Model (Newman, 2005). Using the combination of experiments, theory and modeling we are able to relate the measured tissue level biophysical quantities to s...

  12. Experimental study and constitutive modelling of the passive mechanical properties of the porcine carotid artery and its relation to histological analysis: Implications in animal cardiovascular device trials.

    Science.gov (United States)

    García, A; Peña, E; Laborda, A; Lostalé, F; De Gregorio, M A; Doblaré, M; Martínez, M A

    2011-07-01

    The present study focusses on the determination, comparison and constitutive modelling of the passive mechanical properties of the swine carotid artery over very long stretches in both proximal and distal regions. Special attention is paid to the histological and mechanical variations of these properties depending on the proximity to the heart. The results can have clinical relevance, especially in the research field of intravascular device design. Before the final clinical trials on humans, research in the vascular area is conducted on animal models, swine being the most common due to the similarities between the human and swine cardiovascular systems as well as the fact that the swine size is suitable for testing devices, in this case endovascular carotid systems. The design of devices usually involves numerical techniques, and an important feature is the appropriate modelling of the mechanical properties of the vessel. Fourteen carotid swine arteries were harvested just after sacrifice and cyclic uniaxial tension tests in longitudinal and circumferential directions were performed for distal and proximal samples. The stress-stretch curves obtained were fitted with a hyperelastic anisotropic model. Stress-free configuration states were also analyzed. Finally, human and swine samples were processed in a histological laboratory and images were used to quantify their microconstituents. The statistical analysis revealed significant differences between the mechanical behavior of proximal and distal locations in the circumferential but not in the longitudinal direction. Circumferential direction samples show clear differences both in residual stretches and tensile curves between the two locations, while the features of longitudinal specimens are independent of the axial position. The statistical analysis provides significant evidence of changes depending on the position of the sample, mainly in elastin and SMC quantification.

  13. Different mechanical properties in Seldinger guide wires

    Directory of Open Access Journals (Sweden)

    Wolfram Schummer

    2015-01-01

    Full Text Available Background and Aims: Most central venous catheters are placed using Seldinger guide wires. EN ISO 11070 is the guideline for testing guide wire flexing performance and tensile strength, and we can safely assume that guide wires in use meet these requirements. Unfortunately, EN ISO 11070 guidelines do not reflect the clinical requirements and we continue to see mechanical failures and their associated complications. Material and Methods: This in vitro study was performed in an accredited laboratory. With regard to flexing, we: (1 Established the minimum flexing performance needed to meet clinical requirements, (2 developed flexing performance tests which mimic clinical requirement, and (3 evaluated the mechanical properties of various guide wires relative to these requirements. With regard to tensile strength, we used the testing method prescribed in ISO 11070, but did not end the test at 5 Newton (N. We continued until the guide wire was damaged, or we reached maximum tractive force. We then did a wire-to-wire comparison. We examined two basic wire constructions, monofil and core and coil. Results: Tensile strength: All wires tested, except one, met EN ISO 11070 requirements for 5 N tensile strength. The mean of the wire types tested ranged from 15.06 N to 257.76 N. Flexing performance: None of the wires kinked. The monofil had no evidence of bending. Two core/coil wires displayed minor bending (angle 1.5°. All other wires displayed bending angles between 22.5° and 43.0°. Conclusion: We recommend that: (1 Clinicians use guide wires with high-end mechanical properties, (2 EN ISO 11070 incorporate our flexing test into their testing method, raise the flexing requirement to kink-proof, (3 and raise the tensile strength requirement to a minimum of 30 N, and (3 all manufacturers and suppliers be required to display mechanical properties of all guide wire, and guide wire kits sold.

  14. Enhancement of mechanical properties of 123 superconductors

    Science.gov (United States)

    Balachandran, Uthamalingam

    1995-01-01

    A composition and method of preparing YBa.sub.2 Cu.sub.3 O.sub.7-x superconductor. Addition of tin oxide containing compounds to YBCO superconductors results in substantial improvement of fracture toughness and other mechanical properties without affect on T.sub.c. About 5-20% additions give rise to substantially improved mechanical properties.

  15. Structural study of CuZr and Cu50Zr45Al5 metallic glasses in relation to their GFA and mechanical properties

    Energy Technology Data Exchange (ETDEWEB)

    Kaban, Ivan; Escher, Benjamin; Eckert, Juergen [TU Dresden, Institute of Materials Science (Germany); IFW Dresden, Institute for Complex Materials (Germany); Jovari, Pal [Institute for Solid State Physics and Optics, Budapest (Hungary); Webb, Adam; Regier, Tom [Canadian Light Source, Saskatoon (Canada); Beuneu, Brigitte [Laboratoire Leon Brillouin, CEA-Saclay (France); Kokotin, Valentin [ThyssenKrupp Steel Europe AG, Duisburg (Germany); Mattern, Norbert [IFW Dresden, Institute for Complex Materials (Germany)

    2014-07-01

    In this work we investigate the atomic structure of CuZr and Cu50Zr45Al5 metallic glasses in view of their glass-forming ability and mechanical properties. Using a combination of the state-of-the-art experimental techniques (synchrotron X-ray diffraction and absorption spectroscopy and neutron diffraction), reverse Monte-Carlo simulation and Molecular Dynamics modelling we have obtained partial pair distribution functions, coordination numbers and bond lengths for the glasses studied. Remarkable differences are found for the total as well as for the partial pair distributions in the CuZr and Cu50Zr45Al5 metallic glasses, especially for the Cu-Cu and Zr-Zr pairs at the second and higher coordination shells, suggesting important role of the medium-range order in the glass formation and in the mechanical behaviour.

  16. Changes in mechanical properties of the cuticle and lipid accumulation in relation to adult diapause in the bean bug, Riptortus clavatus.

    Science.gov (United States)

    Morita, A; Soga, K; Hoson, T; Kamisaka, S; Numata, H

    1999-03-01

    Photoperiodically controlled adult diapause in the bean bug, Riptortus clavatus (Thunberg) (Heteroptera: Alydidae) was due to suppression of corpus allatum activity under short-day conditions. The mechanical extensibility of the cuticle of the pronotum was significantly higher in nondiapause adults reared under long-day conditions than in diapause adults reared under short-day conditions. Furthermore, diapause adults accumulated significantly larger amount of lipids than nondiapause ones. It was then examined whether these two characteristics of adult diapause also depend on activity of the corpus allatum, by removal of the corpus allatum and transection of the nervi corporis allati. Even after these two kinds of surgery, adults responded to photoperiod and showed similar differences both in mechanical properties of the cuticle and in lipid content between long-day and short-day conditions. Therefore, inactivity of the corpus allatum is not responsible for the stiffer cuticle or higher lipid accumulation in diapause adults.

  17. Linking properties to microstructure through multiresolution mechanics

    Science.gov (United States)

    McVeigh, Cahal James

    The macroscale mechanical and physical properties of materials are inherently linked to the underlying microstructure. Traditional continuum mechanics theories have focused on approximating the heterogeneous microstructure as a continuum, which is conducive to a partial differential equation mathematical description. Although this makes large scale simulation of material much more efficient than modeling the detailed microstructure, the relationship between microstructure and macroscale properties becomes unclear. In order to perform computational materials design, material models must clearly relate the key underlying microstructural parameters (cause) to macroscale properties (effect). In this thesis, microstructure evolution and instability events are related to macroscale mechanical properties through a new multiresolution continuum analysis approach. The multiresolution nature of this theory allows prediction of the evolving magnitude and scale of deformation as a direct function of the changing microstructure. This is achieved via a two-pronged approach: (a) Constitutive models which track evolving microstructure are developed and calibrated to direct numerical simulations (DNS) of the microstructure. (b) The conventional homogenized continuum equations of motion are extended via a virtual power approach to include extra coupled microscale stresses and stress couples which are active at each characteristic length scale within the microstructure. The multiresolution approach is applied to model the fracture toughness of a cemented carbide, failure of a steel alloy under quasi-static loading conditions and the initiation and velocity of adiabatic shear bands under high speed dynamic loading. In each case the multiresolution analysis predicts the important scale effects which control the macroscale material response. The strain fields predicted in the multiresolution continuum analyses compare well to those observed in direct numerical simulations of the

  18. Densely crosslinked polycarbosiloxanes .2. Thermal and mechanical properties

    NARCIS (Netherlands)

    Flipsen, T.A C; Derks, R.; van der Vegt, H.A.; Stenekes, R.; Pennings, A.J; Hadziioannou, G

    1997-01-01

    The thermal and mechanical properties of two densely crosslinked polycarbosiloxane systems were investigated in relation to the molecular structure. The networks were prepared from functional branched prepolymers and crosslinked via a hydrosilylation curing reaction. The prepolymers having only viny

  19. Structure-Property Relations in Nonferrous Metals

    Science.gov (United States)

    Russell, Alan; Loong Lee, Kok

    2005-05-01

    A long-awaited text that fills the void in non-ferrous metallurgy literature While most undergraduate metallurgy textbooks focus on iron, the most commercially important metallic element, Structure-Property Relations in Nonferrous Metals is a comprehensive textbook covering the remaining eighty-two nonferrous metals. Designed to be readily accessible to materials engineering students at all academic levels, the text describes the relationships between the atomic-, crystal-, and micro-structures of nonferrous metals, and such physical behaviors as strength, ductility, electrical conductivity, and corrosion. In order to capture and retain students' interest, the authors maintain a strong focus on practical application. Each chapter supplements fundamental concepts with engaging examples from actual engineering case studies and industrial projects, directly relating content to real-world application. Part One describes the general concepts of crystal- and micro-structures and the implications of these structures for the mechanical, thermal, and electronic properties of nonferrous metals, intermetallic compounds, and metal matrix composites. Chapters focus on such relevant topics as: Point, line, and planar defects and their effects on a material's properties Dislocations and strengthening mechanisms Fracture and fatigue Strain rate effects and creep Deviations from classic crystallinity Processing methods Composites and intermetallic compounds Part Two builds on Part One by exploring how the concepts presented define the properties of a particular metallic element and its alloys, and how these properties contribute to the engineering uses of each nonferrous metal. An accompanying ftp site contains homework problems, appendices, bibliographies, and tables of data indicating the nations producing metallic elements and the quantities produced. Structure-Property Relations in Nonferrous Metals is a valuable reference for both students in undergraduate metallurgy courses

  20. Mechanical properties of 3D ceramic nanolattices

    Science.gov (United States)

    Meza, Lucas

    Developments in advanced nanoscale fabrication techniques have allowed for the creation of 3-dimensional hierarchical structural meta-materials that can be designed with arbitrary geometry. These structures can be made on length scales spanning multiple orders of magnitude, from tens of nanometers to hundreds of microns. The smallest features are controllable on length scales where materials have been shown to exhibit size effects in their mechanical properties. Combining novel nanoscale mechanical properties with a 3-dimensional architecture enables the creation of new classes of materials with tunable and unprecedented mechanical properties. We present the fabrication and mechanical deformation of hollow tube alumina nanolattices that were fabricated using two-photon lithography direct laser writing (DLW), atomic layer deposition (ALD), and oxygen plasma etching. Nanolattices were designed in a number of different geometries including octet-truss, octahedron, and 3D Kagome. Additionally, a number of structural parameters were varied including tube wall thickness (t) , tube major axis (a) , and unit cell size (L) . The resulting nanolattices had a range of densities from ρ = 4 to 250 mg/cm3. Uniaxial compression and cyclic loading tests were performed on the nanolattices to obtain the yield strength and modulus. In these tests, a marked change in the deformation response was observed when the wall thickness was reduced below 20nm; thick-walled nanolattices (t>20nm) underwent catastrophic, brittle failure, which transitioned to a gradual, ductile-like deformation as wall thickness was reduced. Thick-walled nanolattices also exhibited no recovery after compression, while thin-walled structures demonstrated notable recovery, with some recovering by 98% after compression to 50% strain and by 80% when compressed to 90% strain. Across all geometries, unit cell sizes, and wall thicknesses, we found a consistent power law relation between strength and modulus with

  1. Correlation between the mechanical and histological properties of liver tissue

    OpenAIRE

    Başdoğan, Çağatay; Yarpuzlu, Berkay; Ayyıldız, Mehmet; Tok, Olgu Enis; Aktaş, Ranan Gülhan

    2014-01-01

    In order to gain further insight into the mechanisms of tissue damage during the progression of liver diseases as well as the liver preservation for transplantation, an improved understanding of the relation between the mechanical and histological properties of liver is necessary. We suggest that this relation can only be established truly if the changes in the states of those properties are investigated dynamically as a function of post mortem time. In this regard, we first perform mechanica...

  2. Mechanical properties of C-5 epimerized alginates.

    Science.gov (United States)

    Mørch, Y A; Holtan, S; Donati, I; Strand, B L; Skjåk-Braek, G

    2008-09-01

    There is an increased need for alginate materials with both enhanced and controllable mechanical properties in the fields of food, pharmaceutical and specialty applications. In the present work, well-characterized algal polymers and mannuronan were enzymatically modified using C-5 epimerases converting mannuronic acid residues to guluronic acid in the polymer chain. Composition and sequential structure of controls and epimerized alginates were analyzed by (1)H NMR spectroscopy. Mechanical properties of Ca-alginate gels were further examined giving Young's modulus, syneresis, rupture strength, and elasticity of the gels. Both mechanical strength and elasticity of hydrogels could be improved and manipulated by epimerization. In particular, alternating sequences were found to play an important role for the final mechanical properties of alginate gels, and interestingly, a pure polyalternating sample resulted in gels with extremely high syneresis and rupture strength. In conclusion, enzymatic modification was shown to be a valuable tool in modifying the mechanical properties of alginates in a highly specific manner.

  3. Mechanical properties of nanoporous graphene membrane

    Science.gov (United States)

    Liu, Yilun; Chen, Xi

    2014-01-01

    Nanoporous graphene holds great promise in the application of filtration such as seawater desalination, gas separation, and ionic channels. In this paper, we study the mechanical properties of nanoporous graphene with different size, shape, and density of nanopore. The strength decreases as the size and porosity of the nanopore increases. However, the rough edges of the nanopore has significant influence to the strength where the blunt tip perpendicular to the loading direction has higher strength. The effective tensile modulus is only determined by porosity of the nanopore as ΔE ˜ -p0.64, while the strength is determined by the size, shape, and porosity of the nanopore, for the same type of nanopore the strength scales with the porosity as Δσs ˜ -p. In contrast, the effective fracture strain increases as porosity increases for small and moderate porosities. The work is a first study of the relation between mechanical properties and porosity of nanoporous graphene and is helpful to the design of high performance nanoporous graphene membrane.

  4. Mechanical properties of low dimensional materials

    Science.gov (United States)

    Saini, Deepika

    Recent advances in low dimensional materials (LDMs) have paved the way for unprecedented technological advancements. The drive to reduce the dimensions of electronics has compelled researchers to devise newer techniques to not only synthesize novel materials, but also tailor their properties. Although micro and nanomaterials have shown phenomenal electronic properties, their mechanical robustness and a thorough understanding of their structure-property relationship are critical for their use in practical applications. However, the challenges in probing these mechanical properties dramatically increase as their dimensions shrink, rendering the commonly used techniques inadequate. This dissertation focuses on developing techniques for accurate determination of elastic modulus of LDMs and their mechanical responses under tensile and shear stresses. Fibers with micron-sized diameters continuously undergo tensile and shear deformations through many phases of their processing and applications. Significant attention has been given to their tensile response and their structure-tensile properties relations are well understood, but the same cannot be said about their shear responses or the structure-shear properties. This is partly due to the lack of appropriate instruments that are capable of performing direct shear measurements. In an attempt to fill this void, this dissertation describes the design of an inexpensive tabletop instrument, referred to as the twister, which can measure the shear modulus (G) and other longitudinal shear properties of micron-sized individual fibers. An automated system applies a pre-determined twist to the fiber sample and measures the resulting torque using a sensitive optical detector. The accuracy of the instrument was verified by measuring G for high purity copper and tungsten fibers. Two industrially important fibers, IM7 carbon fiber and KevlarRTM 119, were found to have G = 17 and 2.4 GPa, respectively. In addition to measuring the shear

  5. A Study in Physical and Mechanical Properties of Hemp Fibres

    Directory of Open Access Journals (Sweden)

    Asim Shahzad

    2013-01-01

    Full Text Available This paper presents the results of the experiments undertaken to evaluate various physical and mechanical properties of hemp fibres. The study of these properties is vital for comparison with similar properties of synthetic fibres and for assessing hemp fibres’ suitability for use as reinforcement in composite materials. The properties of hemp fibres were found to be good enough to be used as reinforcement in composite materials. However, the issues of relatively high moisture content of fibres, variability in fibre properties, and relatively poor fibre/matrix interfacial strength were identified as factors that can reduce the efficiency with which these fibres can be utilised.

  6. Mechanical property characterization of intraply hybrid composites

    Science.gov (United States)

    Chamis, C. C.; Lark, R. F.; Sinclair, J. H.

    1979-01-01

    An investigation of the mechanical properties of intraply hybrids made from graphite fiber/epoxy matrix hybridized with secondary S-glass or Kevlar 49 fiber composites is presented. The specimen stress-strain behavior was determined, showing that mechanical properties of intraply hybrid composites can be measured with available methods such as the ten-degree off-axis test for intralaminar shear, and conventional tests for tensile, flexure, and Izod impact properties. The results also showed that combinations of high modulus graphite/S-glass/epoxy matrix composites exist which yield intraply hybrid laminates with the best 'balanced' properties, and that the translation efficiency of mechanical properties from the constituent composites to intraply hybrids may be assessed with a simple equation.

  7. Mechanical deformation mechanisms and properties of amyloid fibrils.

    Science.gov (United States)

    Choi, Bumjoon; Yoon, Gwonchan; Lee, Sang Woo; Eom, Kilho

    2015-01-14

    Amyloid fibrils have recently received attention due to their remarkable mechanical properties, which are highly correlated with their biological functions. We have studied the mechanical deformation mechanisms and properties of amyloid fibrils as a function of their length scales by using atomistic simulations. It is shown that the length of amyloid fibrils plays a role in their deformation and fracture mechanisms in such a way that the competition between shear and bending deformations is highly dependent on the fibril length, and that as the fibril length increases, so does the bending strength of the fibril while its shear strength decreases. The dependence of rupture force for amyloid fibrils on their length is elucidated using the Bell model, which suggests that the rupture force of the fibril is determined from the hydrogen bond rupture mechanism that critically depends on the fibril length. We have measured the toughness of amyloid fibrils, which is shown to depend on the fibril length. In particular, the toughness of the fibril with its length of ∼3 nm is estimated to be ∼30 kcal mol(-1) nm(-3), comparable to that of a spider silk crystal with its length of ∼2 nm. Moreover, we have shown the important effect of the pulling rate on the mechanical deformation mechanisms and properties of amyloid fibril. It is found that as the pulling rate increases, so does the contribution of the shear effect to the elastic deformation of the amyloid fibril with its length of deformation mechanism of the amyloid fibril with its length of >15 nm is almost independent of the pulling rate. Our study sheds light on the role of the length scale of amyloid fibrils and the pulling rate in their mechanical behaviors and properties, which may provide insights into how the excellent mechanical properties of protein fibrils can be determined.

  8. Some Mechanical Properties of Austempered Ductile Iron

    Science.gov (United States)

    Waanders, F. B.; Vorster, S. W.; Vorster, M. J.

    1998-12-01

    In the present investigation the influence of the microstructure, obtained after an austempering treatment in a "process window", on the mechanical properties of austempered ductile iron has been investigated. These properties include tensile strength, elongation and hardness. Conversion electron Mössbauer spectra (CEMS) were measured, after heat treatment.

  9. Some mechanical properties of austempered ductile iron

    Energy Technology Data Exchange (ETDEWEB)

    Waanders, F.B.; Vorster, S.W.; Vorster, M.V. [Potchefstroom Univ. (South Africa). Dept. of Metall. Eng.

    1997-12-01

    In the present investigation the influence of the microstructure, obtained after an austempering treatment in a ``process window``, on the mechanical properties of austempered ductile iron has been investigated. These properties include tensile strength, elongation and hardness. Conversion electron Moessbauer spectra (CEMS) were measured, after heat treatment. (orig.). 7 refs.

  10. Some Mechanical Properties of Austempered Ductile Iron

    Energy Technology Data Exchange (ETDEWEB)

    Waanders, F.B.; Vorster, S.W.; Vorster, M.J. [Potchefstroom University, Department of Metallurgical Engineering (South Africa)

    1998-12-15

    In the present investigation the influence of the microstructure, obtained after an austempering treatment in a 'process window', on the mechanical properties of austempered ductile iron has been investigated. These properties include tensile strength, elongation and hardness. Conversion electron Moessbauer spectra (CEMS) were measured, after heat treatment.

  11. Ultrasonic investigation of mechanical properties of double base rocket propellants

    NARCIS (Netherlands)

    Schroeff, J.A. van der; Boer, R.S. de

    1976-01-01

    For a series of double base rocket propellants and for poly-methylmethacrylate (PMMA) the longitudinal and transverse sound wave velocities are measured at a frequency of 0.351 MHz in t h e temperature range of −40°C to +60°C. The relations between these acoustic properties and mechanical properties

  12. Grain size dependent mechanical properties in nanophase materials

    Energy Technology Data Exchange (ETDEWEB)

    Siegel, R.W. [Argonne National Lab., IL (United States); Fougere, G.E. [Northwestern Univ., Evanston, IL (United States). Dept. of Materials Science and Engineering

    1995-02-01

    It has become possible in recent years to synthesize metals and ceramics under well controlled conditions with constituent grain structures on a manometer size scale (below 100 nm). These new materials have mechanical properties that are strongly grain-size dependent and often significantly different than those of their coarser grained counterparts. Nanophase metals tend to become stronger and ceramics are more easily deformed as grain size is reduced. The observed mechanical property changes appear to be related primarily to grain size limitations and the large percentage of atoms in grain boundary environments. A brief overview of our present knowledge about the grain-size dependent mechanical properties of nanophase materials is presented.

  13. Function-related adaptations of ultrastructure, mineral phase distribution and mechanical properties in the incisive cuticle of mandibles of Porcellio scaber Latreille, 1804.

    Science.gov (United States)

    Huber, Julia; Fabritius, Helge-Otto; Griesshaber, Erika; Ziegler, Andreas

    2014-10-01

    In terrestrial isopods the mandibles consist of a corpus carrying strong muscle tissue, and a pars incisiva (PI) that cuts dry leaves into smaller ingestible pieces. We studied the cuticle of the PI of Porcellio scaber in order to understand region-dependent differences in its ultrastructure, composition, and the resulting mechanical properties, employing several microscopic and analytical techniques as well as nanoindentation experiments. The cuticle of the incisive tip is not mineralized and consists of an unusually thick epicuticle containing thin fibrils, two subjacent cuticular layers, and a central core containing fibrils of different orientation, either longitudinal or circumferential. A thick epicuticle of the middle region just behind the tip projects long epicuticular extensions into the subjacent endocuticle, likely to prevent delamination. A distinct exocuticular layer is lacking in the middle region. Most chitin-protein fibrils within the endocuticle are oriented in parallel pointing towards the tip. Surprisingly, the middle region is mineralized by amorphous calcium phosphate (ACP) only. Near the base, ACP is successively replaced by amorphous calcium carbonate and calcite is restricted to a distal layer in the base. At the transition between middle and base, the epicuticle forms a hybrid material containing fibrils of the exocuticle. Nanoindentation experiments reveal an increase of the stiffness and hardness from the tip towards the base and significantly higher values on transversal in comparison to longitudinal planes. The results suggest that ultrastructure and composition are adapted for conveying high forces from a rather thin cutting edge to the stable base of the PI.

  14. Bone Mineral Densities and Mechanical Properties of Retrieved Femoral Bone Samples in relation to Bone Mineral Densities Measured in the Respective Patients

    Directory of Open Access Journals (Sweden)

    Yvonne Haba

    2012-01-01

    Full Text Available The bone mineral density (BMD of retrieved cancellous bone samples is compared to the BMD measured in vivo in the respective osteoarthritic patients. Furthermore, mechanical properties, in terms of structural modulus (Es and ultimate compression strength (σmax of the bone samples, are correlated to BMD data. Human femoral heads were retrieved from 13 osteoarthritic patients undergoing total hip replacement. Subsequently, the BMD of each bone sample was analysed using dual energy X-ray absorptiometry (DXA as well as ashing. Furthermore, BMDs of the proximal femur were analysed preoperatively in the respective patients by DXA. BMDs of the femoral neck and head showed a wide variation, from 1016±166 mg/cm2 to 1376±404 mg/cm2. BMDs of the bone samples measured by DXA and ashing yielded values of 315±199 mg/cm2 and 347±113 mg/cm3, respectively. Es and σmax amounted to 232±151 N/mm2 and 6.4±3.7 N/mm2. Significant correlation was found between the DXA and ashing data on the bone samples and the DXA data from the patients at the femoral head (r=0.85 and 0.79, resp.. Es correlated significantly with BMD in the patients and bone samples as well as the ashing data (r=0.79, r=0.82, and r=0.8, resp..

  15. bone mineral densities and mechanical properties of retrieved femoral bone samples in relation to bone mineral densities measured in the respective patients.

    Science.gov (United States)

    Haba, Yvonne; Skripitz, Ralf; Lindner, Tobias; Köckerling, Martin; Fritsche, Andreas; Mittelmeier, Wolfram; Bader, Rainer

    2012-01-01

    The bone mineral density (BMD) of retrieved cancellous bone samples is compared to the BMD measured in vivo in the respective osteoarthritic patients. Furthermore, mechanical properties, in terms of structural modulus (E(s)) and ultimate compression strength (σ(max)) of the bone samples, are correlated to BMD data. Human femoral heads were retrieved from 13 osteoarthritic patients undergoing total hip replacement. Subsequently, the BMD of each bone sample was analysed using dual energy X-ray absorptiometry (DXA) as well as ashing. Furthermore, BMDs of the proximal femur were analysed preoperatively in the respective patients by DXA. BMDs of the femoral neck and head showed a wide variation, from 1016 ± 166 mg/cm(2) to 1376 ± 404 mg/cm(2). BMDs of the bone samples measured by DXA and ashing yielded values of 315 ± 199 mg/cm(2) and 347 ± 113 mg/cm(3), respectively. E(s) and σ(max) amounted to 232 ± 151 N/mm(2) and 6.4 ± 3.7 N/mm(2). Significant correlation was found between the DXA and ashing data on the bone samples and the DXA data from the patients at the femoral head (r = 0.85 and 0.79, resp.). E(s) correlated significantly with BMD in the patients and bone samples as well as the ashing data (r = 0.79, r = 0.82, and r = 0.8, resp.).

  16. Mechanical properties of ceramic-polymer nanocomposites

    Directory of Open Access Journals (Sweden)

    2009-03-01

    Full Text Available Nano crystalline powders of Barium Sodium Niobate (BNN with the composition Ba3–2x Na4+x R Nb10 O30 with (R stands for rare earth = 0, x = 0 have been prepared by conventional ceramic technique. Barium Sodium Niobate can form a wide range of solid solutions, incorporating rare earth and alkali, alkaline earth elements with different compositions. The powder belonged to tungsten bronze type structure with tetragonal symmetry and lattice constants a = b = 1.2421 nm and c = 0.3903 nm. XRD (X-ray Diffraction SEM (Scanning Electron Microscope and AFM (Atomic Force Microscope studies revealed that the particle size is in the nanometer range. Composites are prepared by mixing powders of BNN with polystyrene at different volume fractions of the BNN. Melt mixing technique is carried out in a Brabender Plasticoder at a rotor speed of 60 rpm (rotations per minute for composite preparation. Mechanical properties such as stress-strain behavior, Young’s modulus, tensile strength, strain at break etc. are evaluated. Addition of filler enhances the mechanical properties of the polymer such as Young’s modulus and tensile strength. The composites showed the trend of perfect adhesion between the filler and the polymer. The filler particles are distributed relatively uniform fashion in all composites and the particles are almost spherical in shape with irregular boundaries. To explore more carefully the degree of interfacial adhesion between the two phases, the results are analyzed by using models featuring adhesion parameter. The experimental results are compared with theoretical predictions.

  17. Mechanical Properties of Crystalline Silicon Carbide Nanowires.

    Science.gov (United States)

    Zhang, Huan; Ding, Weiqiang; Aidun, Daryush K

    2015-02-01

    In this paper, the mechanical properties of crystalline silicon carbide nanowires, synthesized with a catalyst-free chemical vapor deposition method, were characterized with nanoscale tensile testing and mechanical resonance testing methods inside a scanning electron microscope. Tensile testing of individual silicon carbide nanowire was performed to determine the tensile properties of the material including the tensile strength, failure strain and Young's modulus. The silicon carbide nanowires were also excited to mechanical resonance in the scanning electron microscope vacuum chamber using mechanical excitation and electrical excitation methods, and the corresponding resonance frequencies were used to determine the Young's modulus of the material according to the simple beam theory. The Young's modulus values from tensile tests were in good agreement with the ones obtained from the mechanical resonance tests.

  18. SWCNT Composites, Interfacial Strength and Mechanical Properties

    DEFF Research Database (Denmark)

    Ma, Jing; Larsen, Mikael

    2013-01-01

    Abstract: Single-Walled Carbon Nanotubes (SWCNT) have despite the superior mechanical properties not fully lived up to the promise as reinforcement in SWCNT composites. The strain transfer from matrix to carbon nanotubes (CNT) is poorly understood and is caused by both fewer localized strong bond...... is applied to the composite materials. The effect of polymer matrix, modification and concentration of the CNTs are discussed. The strain transfer i.e. 2D band shift under tension is compared to the mechanical properties of the SWCNT composite material.......Abstract: Single-Walled Carbon Nanotubes (SWCNT) have despite the superior mechanical properties not fully lived up to the promise as reinforcement in SWCNT composites. The strain transfer from matrix to carbon nanotubes (CNT) is poorly understood and is caused by both fewer localized strong...

  19. Mechanical properties of nanoparticles: basics and applications

    Science.gov (United States)

    Guo, Dan; Xie, Guoxin; Luo, Jianbin

    2014-01-01

    The special mechanical properties of nanoparticles allow for novel applications in many fields, e.g., surface engineering, tribology and nanomanufacturing/nanofabrication. In this review, the basic physics of the relevant interfacial forces to nanoparticles and the main measuring techniques are briefly introduced first. Then, the theories and important results of the mechanical properties between nanoparticles or the nanoparticles acting on a surface, e.g., hardness, elastic modulus, adhesion and friction, as well as movement laws are surveyed. Afterwards, several of the main applications of nanoparticles as a result of their special mechanical properties, including lubricant additives, nanoparticles in nanomanufacturing and nanoparticle reinforced composite coating, are introduced. A brief summary and the future outlook are also given in the final part.

  20. Primitive object relations and mechanisms.

    Science.gov (United States)

    Rosenfeld, H

    1983-01-01

    In the first part of this paper I have concentrated on Melanie Klein's description of early infantile positive and negative object relations, which, in her view, start from birth onwards. I have also described the defences which arise in early infancy, which Melanie Klein stressed particularly in her papers in 1935 and 1946. I have discussed in greater detail those processes which Melanie Klein and others, including myself, have described under the term projective identification.

  1. Propriedades mecânicas de um sistema de osteossíntese de estabilidade relativa Mechanicals properties of an osteosynthesis system of relative stability

    Directory of Open Access Journals (Sweden)

    Alexandre Yoneda

    2008-01-01

    Full Text Available Neste trabalho foram estudadas as propriedades mecânicas de um novo sistema de osteossíntese metálica (SPS® - Sistema Pengo de Síntese por meio de ensaios mecânicos de flexão e torção. Os SPS® foram montados e fixados em bastões cilíndricos de madeira. Para os ensaios mecânicos foram adotados nove grupos de modelos em função dos três comprimentos de placas e das três distâncias de montagem entre as placas. Os ensaios de flexão foram realizados com o SPS® na posição lateral em relação ao eixo de movimentação da máquina de ensaios. Para os ensaios de torção não se adotou nenhuma posição específica do SPS®. Os resultados das propriedades de rigidez e da deflexão do SPS®, nos ensaios mecânicos de flexão e torção, tiveram a interferência das variantes números de furos nas placas e o espaço entre as placas, ou seja, quanto maior o número de furos nas placas e menor o espaço entre elas maior a rigidez e menor a deflexão. Conclui-se que a rigidez e a deflexão variaram proporcionalmente ao número de furos nas placas e ao espaço entre elas.In this study, the mechanical properties of a new metallic system for bone synthesis (SPS® - Synthesis Pengo System were investigated by means of flexion and torsion mechanical tests. The SPS® systems were assembled in cylindrical wood sticks using stainless steel cortical bolts. Nine groups of models were adopted for tests according to the three plate lengths and the three assembly distances. Flexion tests were performed with the SPS® systems positioned laterally to the assay machine's dislocation axis. For the torsion tests, the SPS® systems were placed in no specific position. The SPS® stiffness and deflection results obtained with the flexion and torsion mechanical tests were dependent on the number of holes on the plates and on the distance between the plates mounted in the wood stick, that is, the higher the number of holes and the shorter the distance between

  2. Determination of Mechanical Properties of Micromembranes with Compressive Residual Stress

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A novel model of a load-deflection method to determine the mechanical properties of micromembranes with compressive residual stress is described. Since thin film structures are frequently used in micro devices, characterisation of mechanical properties of thin films is desired by the design and fabrication of micromachines. In this paper, the mechanical properties of thin micromembranes under compressive stress are characterised, which are fabricated by bulk micromachining. The relation between the center deflection and the load pressure on a square membrane is deduced by modelling the membrane as an elastic plate having large deflection with clamped boundaries. According to the model, whether the membrane has initial deflection or not has no effect on the measurement result. The Young's modulus and residual stress are simultaneously determined. The mechanical properties of siliconoxide, silicon nitride membranes and composite membranes of polysilicon with silicon nitride are measured.

  3. Mechanical Properties of Plug Welds after Micro-Jet Cooling

    Directory of Open Access Journals (Sweden)

    Hadryś D.

    2016-12-01

    Full Text Available New technology of micro-jet welding could be regarded as a new way to improve mechanical properties of plug welds. The main purpose of that paper was analyzing of mechanical properties of plug welds made by MIG welding method with micro-jet cooling. The main way for it was comparison of plug welds made by MIG welding method with micro-jet cooling and plug welds made by ordinary MIG welding method. It is interesting for steel because higher amount of acicular ferrite (AF in weld metal deposit (WMD is obtained in MIG welding method with micro-jet cooling in relation to ordinary MIG welding method. This article presents the influence of the cooling medium and the number of micro-jet streams on mechanical properties of the welded joint. Mechanical properties were described by force which is necessary to destroy weld joint.

  4. Physical and mechanical properties of hemp seed

    Science.gov (United States)

    Taheri-Garavand, A.; Nassiri, A.; Gharibzahedi, S. M. T.

    2012-04-01

    The current study was conducted to investigate the effect of moisture content on the post-harvest physical and mechanical properties of hemp seed in the range of 5.39 to 27.12% d.b. Results showed that the effect of moisture content on the most physical properties of the grain was significant (Phemp seed was not significant. However, the moisture content effect on rupture force and energy was significant (Phemp seed were significant (P<0.05).

  5. Mechanical Properties of Ingot Nb Cavities

    Energy Technology Data Exchange (ETDEWEB)

    Ciovati, Gianluigi; Dhakal, Pashupati; Kneisel, Peter; Mammosser, John; Matalevich, Joseph; Rao Myneni, Ganapati

    2014-07-01

    This contribution presents the results of measurements of the resonant frequency and of strain along the contour of a single-cell cavity made of ingot Nb subjected to increasing uniform differential pressure, up to 6 atm. The data were used to infer mechanical properties of this material after cavity fabrication, by comparison with the results from simulation calculations done with ANSYS. The objective is to provide useful information about the mechanical properties of ingot Nb cavities which can be used in the design phase of SRF cavities intended to be built with this material.

  6. Microstructure, mechanical properties, bio-corrosion properties and antibacterial properties of Ti–Ag sintered alloys

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Mian [Key Lab. for Anisotropy and Texture of Materials, Education Ministry of China, Northeastern University, Shenyang 110819 (China); Zhang, Erlin, E-mail: zhangel@atm.neu.edu.cn [Key Lab. for Anisotropy and Texture of Materials, Education Ministry of China, Northeastern University, Shenyang 110819 (China); Zhang, Lan [State Key Laboratory for Mechanical Behavior of Materials, Xi' an Jiaotong University, Xi' an 710049 (China)

    2016-05-01

    In this research, Ag element was selected as an antibacterial agent to develop an antibacterial Ti–Ag alloy by a powder metallurgy. The microstructure, phase constitution, mechanical properties, corrosion resistance and antibacterial properties of the Ti–Ag sintered alloys have been systematically studied by X-ray diffraction (XRD), scanning electron microscope (SEM), compressive test, electrochemical measurements and antibacterial test. The effects of the Ag powder size and the Ag content on the antibacterial property and mechanical property as well as the anticorrosion property have been investigated. The microstructure results have shown that Ti–Ag phase, residual pure Ag and Ti were the mainly phases in Ti–Ag(S75) sintered alloy while Ti{sub 2}Ag was synthesized in Ti–Ag(S10) sintered alloy. The mechanical test indicated that Ti–Ag sintered alloy showed a much higher hardness and the compressive yield strength than cp-Ti but the mechanical properties were slightly reduced with the increase of Ag content. Electrochemical results showed that Ag powder size had a significant effect on the corrosion resistance of Ti–Ag sintered alloy. Ag content increased the corrosion resistance in a dose dependent way under a homogeneous microstructure. Antibacterial tests have demonstrated that antibacterial Ti–Ag alloy was successfully prepared. It was also shown that the Ag powder particle size and the Ag content influenced the antibacterial activity seriously. The reduction in the Ag powder size was benefit to the improvement in the antibacterial property and the Ag content has to be at least 3 wt.% in order to obtain a strong and stable antibacterial activity against Staphylococcus aureus bacteria. The bacterial mechanism was thought to be related to the Ti{sub 2}Ag and its distribution. - Highlights: • Ti–Ag alloy with up to 99% antibacterial rate was developed by powder metallurgy. • The effects of the Ag powder size and the Ag content on the

  7. Probing cell mechanical properties with microfluidic devices

    Science.gov (United States)

    Rowat, Amy

    2012-02-01

    Exploiting flow on the micron-scale is emerging as a method to probe cell mechanical properties with 10-1000x advances in throughput over existing technologies. The mechanical properties of cells and the cell nucleus are implicated in a wide range of biological contexts: for example, the ability of white blood cells to deform is central to immune response; and malignant cells show decreased stiffness compared to benign cells. We recently developed a microfluidic device to probe cell and nucleus mechanical properties: cells are forced to deform through a narrow constrictions in response to an applied pressure; flowing cells through a series of constrictions enables us to probe the ability of hundreds of cells to deform and relax during flow. By tuning the constriction width so it is narrower than the width of the cell nucleus, we can specifically probe the effects of nuclear physical properties on whole cell deformability. We show that the nucleus is the rate-limiting step in cell passage: inducing a change in its shape to a multilobed structure results in cells that transit more quickly; increased levels of lamin A, a nuclear protein that is key for nuclear shape and mechanical stability, impairs the passage of cells through constrictions. We are currently developing a new class of microfluidic devices to simultaneously probe the deformability of hundreds of cell samples in parallel. Using the same soft lithography techniques, membranes are fabricated to have well-defined pore distribution, width, length, and tortuosity. We design the membranes to interface with a multiwell plate, enabling simultaneous measurement of hundreds of different samples. Given the wide spectrum of diseases where altered cell and nucleus mechanical properties are implicated, such a platform has great potential, for example, to screen cells based on their mechanical phenotype against a library of drugs.

  8. Mechanical properties of thermoelectric lanthanum telluride from quantum mechanics

    Science.gov (United States)

    Li, Guodong; Aydemir, Umut; Wood, Max; Goddard, William A., III; Zhai, Pengcheng; Zhang, Qingjie; Snyder, G. Jeffrey

    2017-07-01

    Lanthanum telluride (La3Te4) is an n-type high-performance thermoelectric material in the high temperature range, but its mechanical properties remain unknown. Since we want robust mechanical properties for their integration into industrial applications, we report here quantum mechanics (QM) simulations to determine the ideal strength and deformation mechanisms of La3Te4 under pure shear deformations. Among all plausible shear deformation paths, we find that shearing along the (0 0 1)/ slip system has the lowest ideal shear strength of 0.99 GPa, making it the most likely slip system to be activated under pressure. We find that the long range La-Te ionic interactions play the predominant role in resisting shear deformation. To enhance the mechanical strength, we suggest improving the long ionic La-Te bond stiffness to strengthen the ionic La-Te framework in La3Te4 by a defect-engineering strategy, such as partial substitution of La by Ce or Pr having isotypic crystal structures. This work provides the fundamental information to understand the intrinsic mechanics of La3Te4.

  9. Microstructure and mechanical properties of MTG YBCO

    Science.gov (United States)

    Li, L. F.; Zhang, Z.; Jin, D.; Li, Y. Y.; Meriani, S.

    1997-08-01

    MTG (melt-texture-growth) samples were prepared by passing teh YBa2Cu3O7-x pellets (solid state reaction products) through a furnace with a temperature gradient of 15 °C for 5, 10 and 15 min, respectively. The Jc value, Vickers hardness and fracture toughness of the above samples were measured. And the results indicated that 211 precipitates can influence not only the critical current density, but also the mechanical properties According to microstructure analysis and fracture mechanics theory, the effects of 211 precipatates which can act as a toughening agent on mechanical gains were discussed in this paper.

  10. Mechanical properties of wet granular materials

    Energy Technology Data Exchange (ETDEWEB)

    Fournier, Z; Geromichalos, D; Herminghaus, S; Kohonen, M M; Mugele, F; Scheel, M; Schulz, M; Schulz, B; Schier, Ch; Seemann, R; Skudelny, A

    2005-03-09

    We elaborate on the impact of liquids upon the mechanical properties of granular materials. We find that most of the experimental and simulation results may be accounted for by a simple model assuming frictionless, spherical grains, with a hysteretic attractive interaction between neighbouring grains due to capillary forces.

  11. Nanostructured thin films and coatings mechanical properties

    CERN Document Server

    2010-01-01

    The first volume in "The Handbook of Nanostructured Thin Films and Coatings" set, this book concentrates on the mechanical properties, such as hardness, toughness, and adhesion, of thin films and coatings. It discusses processing, properties, and performance and provides a detailed analysis of theories and size effects. The book presents the fundamentals of hard and superhard nanocomposites and heterostructures, assesses fracture toughness and interfacial adhesion strength of thin films and hard nanocomposite coatings, and covers the processing and mechanical properties of hybrid sol-gel-derived nanocomposite coatings. It also uses nanomechanics to optimize coatings for cutting tools and explores various other coatings, such as diamond, metal-containing amorphous carbon nanostructured, and transition metal nitride-based nanolayered multilayer coatings.

  12. Improvement of mechanical properties of glass substrates

    Science.gov (United States)

    Karbay, Ismail Hakki Cengizhan; Budakoglu, Refika; Zayim, Esra Ozkan

    2015-12-01

    This paper aims to enhance the mechanical and optical properties of glass substrates with thin films by the sol-gel method. TiO2-SiO2 binary system and Ta2O5 were deposited on glass substrates with high transparency. Ring-on-ring flexure and scratch tests were the main mechanical characterization tests. Herein, we report that the thin films can be used to enhance the mechanical properties of the glass substrates efficiently and effectively. TiO2-SiO2 binary system shows more than two times and Ta2O5 thin films show nearly three times better ultimate strength in the ring-on-ring flexure test. Besides, Ta2O5 thin film samples show superior scratch resistance. Additionally, the finite element method was also used to check the conformity in the application of mechanical properties of composite materials. It is also worth noting that, the finite element method can be used to accurately analyze the mechanical stability of composite materials. The use of the finite element method can reduce the total number of experimental trials without losing reliability.

  13. Mechanical properties of lattice grid composites

    Institute of Scientific and Technical Information of China (English)

    Hualin Fan; Daining Fang; Fengnian Jin

    2008-01-01

    An equivalent continuum method only considering the stretching deformation of struts was used to study the in-plane stiffness and strength of planar lattice grid composite materials. The initial yield equations of lattices were deduced. Initial yield surfaces were depicted separately in different 3D and 2D stress spaces. The failure envelope is a polyhedron in 3D spaces and a polygon in 2D spaces. Each plane or line of the failure envelope is corresponding to the yield or buckling of a typical bar row. For lattices with more than three bar rows, subsequent yield of the other bar rowafter initial yield made the lattice achieve greater limit strength. The importance of the buckling strength of the grids was strengthened while the grids were relative sparse. The integration model of the method was used to study the nonlinear mechanical properties of strain hardening grids. It was shown that the integration equation could accurately model the complete stress-strain curves of the grids within small deformations.

  14. Mechanical Properties of Polymer Nano-composites

    Science.gov (United States)

    Srivastava, Iti

    Thermoset polymer composites are increasingly important in high-performance engineering industries due to their light-weight and high specific strength, finding cutting-edge applications such as aircraft fuselage material and automobile parts. Epoxy is the most widely employed thermoset polymer, but is brittle due to extensive cross-linking and notch sensitivity, necessitating mechanical property studies especially fracture toughness and fatigue resistance, to ameliorate the low crack resistance. Towards this end, various nano and micro fillers have been used with epoxy to form composite materials. Particularly for nano-fillers, the 1-100 nm scale dimensions lead to fascinating mechanical properties, oftentimes proving superior to the epoxy matrix. The chemical nature, topology, mechanical properties and geometry of the nano-fillers have a profound influence on nano-composite behavior and hence are studied in the context of enhancing properties and understanding reinforcement mechanisms in polymer matrix nano-composites. Using carbon nanotubes (CNTs) as polymer filler, uniquely results in both increased stiffness as well as toughness, leading to extensive research on their applications. Though CNTs-polymer nano-composites offer better mechanical properties, at high stress amplitude their fatigue resistance is lost. In this work covalent functionalization of CNTs has been found to have a profound impact on mechanical properties of the CNT-epoxy nano-composite. Amine treated CNTs were found to give rise to effective fatigue resistance throughout the whole range of stress intensity factor, in addition to significantly enhancing fracture toughness, ductility, Young's modulus and average hardness of the nano-composite by factors of 57%, 60%, 30% and 45% respectively over the matrix as a result of diminished localized cross-linking. Graphene, a one-atom-thick sheet of atoms is a carbon allotrope, which has garnered significant attention of the scientific community and is

  15. Food mechanical properties and dietary ecology.

    Science.gov (United States)

    Berthaume, Michael A

    2016-01-01

    Interdisciplinary research has benefitted the fields of anthropology and engineering for decades: a classic example being the application of material science to the field of feeding biomechanics. However, after decades of research, discordances have developed in how mechanical properties are defined, measured, calculated, and used due to disharmonies between and within fields. This is highlighted by "toughness," or energy release rate, the comparison of incomparable tests (i.e., the scissors and wedge tests), and the comparison of incomparable metrics (i.e., the stress and displacement-limited indices). Furthermore, while material scientists report on a myriad of mechanical properties, it is common for feeding biomechanics studies to report on just one (energy release rate) or two (energy release rate and Young's modulus), which may or may not be the most appropriate for understanding feeding mechanics. Here, I review portions of materials science important to feeding biomechanists, discussing some of the basic assumptions, tests, and measurements. Next, I provide an overview of what is mechanically important during feeding, and discuss the application of mechanical property tests to feeding biomechanics. I also explain how 1) toughness measures gathered with the scissors, wedge, razor, and/or punch and die tests on non-linearly elastic brittle materials are not mechanical properties, 2) scissors and wedge tests are not comparable and 3) the stress and displacement-limited indices are not comparable. Finally, I discuss what data gathered thus far can be best used for, and discuss the future of the field, urging researchers to challenge underlying assumptions in currently used methods to gain a better understanding between primate masticatory morphology and diet.

  16. A Novel Method of Mechanical Oxidation of CNT for Polymer Nanocomposite Application: Evaluation of Mechanical, Dynamic Mechanical, and Rheological Properties

    Directory of Open Access Journals (Sweden)

    Priyanka Pandey

    2014-01-01

    Full Text Available A new approach of oxidation of carbon nanotubes has been used to oxidize the CNTs. A comparative aspect of the mechanical oxidation and acid oxidation process has been established. FTIR analysis and titration method have shown the higher feasibility of the mechanical oxidation method to oxidize the CNTs. Comparatively less damage to the CNTs has been observed in case of mechanically oxidized as compared to acid oxidized CNTs. The mechanical properties of the nanocomposites reinforced with the acid oxidized CNT (ACNT and mechanically oxidized CNTs (McCNT were analyzed and relatively higher properties in the nanocomposites reinforced with McCNT were noticed. The less degree of entanglement in the McCNTs was noticed as compared to ACNTs. The dynamic mechanical analysis of the nanocomposites revealed much improved load transfer capability in the McCNT reinforced composites. Further, the rheological properties of the nanocomposites revealed the higher performance of McCNT reinforced composites.

  17. Mechanical Properties of Cellulose Microfiber Reinforced Polyolefin

    Science.gov (United States)

    Kobayashi, Satoshi; Yamada, Hiroyuki

    Cellulose microfiber (CeF) has been expected as a reinforcement of polymer because of its high modulus and strength and lower cost. In the present study, mechanical properties of CeF/polyolefin were investigated. Tensile modulus increased with increasing CeF content. On the other hand, tensile strength decreased. Fatigue properties were also investigated with acoustic emission measurement. Stiffness of the composites gradually decreased with loading. Drastic decrease in stiffness was observed just before the final fracture. Based on the Mori-Tanaka's theory, the method to calculate modulus of CeF were proposed to evaluate dispersion of CeF.

  18. The relationships between deformation mechanisms and mechanical properties of additively manufactured porous biomaterials.

    Science.gov (United States)

    Kadkhodapour, J; Montazerian, H; Darabi, A Ch; Zargarian, A; Schmauder, S

    2016-09-16

    Modulating deformation mechanism through manipulating morphological parameters of scaffold internal pore architecture provides potential to tailor the overall mechanical properties under physiological loadings. Whereas cells sense local strains, cell differentiation is also impressed by the elastic deformations. In this paper, structure-property relations were developed for Ti6-Al-4V scaffolds designed based on triply periodic minimal surfaces. 10mm cubic scaffolds composed of 5×5×5 unit cells formed of F-RD (bending dominated) and I-WP (stretching dominated) architectures were additively manufactured at different volume fractions and subjected to compressive tests. The first stages of deformation for stretching dominated structure, was accompanied by bilateral layer-by-layer failure of unit cells owing to the buckling of micro-struts, while for bending dominated structure, namely F-RD, global shearing bands appeared since the shearing failure of struts in the internal architecture. Promoted mechanical properties were found for stretching dominated structure since the global orientation of struts were parallel to loading direction while inclination of struts diminished specific properties for bending dominated structure. Moreover, elastic-plastic deformation was computationally studied by applying Johnson-Cook damage model to the voxel-based models in FE analysis. Scaling analysis was performed for mechanical properties with respect to the relative density thereby failure mechanism was correlated to the constants of power law describing mechanical properties.

  19. Laser welding of polymers, compatibility and mechanical properties

    DEFF Research Database (Denmark)

    Nielsen, Steen Erik; Strange, Marianne; Kristensen, Jens Klæstrup

    2013-01-01

    Laser welding of polymers is today a commonly used industrial technology. It has shown obvious advantages compared to e.g. adhesive bonding in terms of higher productivity, better quality and easiness for automation. The ongoing development of lasers tailored for polymer welding in coordination....... There is an increasing industrial interest in joining dissimilar polymers. To overcome the challenges involved increased focus is set on the understanding of joining mechanisms, morphology and molecular structure behavior. Also the understanding of resulting mechanical and thermal properties is presently subject...... for research and development. This paper presents some research results related to laser welding of various polymer materials, including weld compatibility investigations related to the joining of different polymers. Theory for bonding mechanisms, strength development, mechanical properties testing and other...

  20. Mechanical properties of intra-ocular lenses

    Science.gov (United States)

    Ehrmann, Klaus; Kim, Eon; Parel, Jean-Marie

    2008-02-01

    Cataract surgery usually involves the replacement of the natural crystalline lens with a rigid or foldable intraocular lens to restore clear vision for the patient. While great efforts have been placed on optimising the shape and optical characteristics of IOLs, little is know about the mechanical properties of these devices and how they interact with the capsular bag once implanted. Mechanical properties measurements were performed on 8 of the most commonly implanted IOLs using a custom build micro tensometer. Measurement data will be presented for the stiffness of the haptic elements, the buckling resistance of foldable IOLs, the dynamic behaviour of the different lens materials and the axial compressibility. The biggest difference between the lens types was found between one-piece and 3-piece lenses with respect to the flexibility of the haptic elements

  1. Mechanical properties of silicones for MEMS

    Science.gov (United States)

    Schneider, F.; Fellner, T.; Wilde, J.; Wallrabe, U.

    2008-06-01

    This paper focuses on the mechanical properties of polydimethylsiloxane (PDMS) relevant for microelectromechanical system (MEMS) applications. In view of the limited amount of published data, we analyzed the two products most commonly used in MEMS, namely RTV 615 from Bayer Silicones and Sylgard 184 from Dow Corning. With regard to mechanical properties, we focused on the dependence of the elastic modulus on the thinner concentration, temperature and strain rate. In addition, creep and thermal aging were analyzed. We conclude that the isotropic and constant elastic modulus has strong dependence on the hardening conditions. At high hardening temperatures and long hardening time, RTV 615 displays an elastic modulus of 1.91 MPa and Sylgard 184 of 2.60 MPa in a range up to 40% strain.

  2. Mechanical properties of functionalized carbon nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Z Q; Liu, B; Chen, Y L; Hwang, K C [FML, Department of Engineering Mechanics, Tsinghua University, Beijing 100084 (China); Jiang, H [Department of Mechanical and Aerospace Engineering, Arizona State University, Tempe, AZ 85287 (United States); Huang, Y [Department of Civil and Environmental Engineering, Northwestern University, Evanston, IL 60208 (United States)], E-mail: liubin@tsinghua.edu.cn, E-mail: y-huang@northwestern.edu

    2008-10-01

    Carbon nanotubes (CNTs) used to reinforce polymer matrix composites are functionalized to form covalent bonds with the polymer in order to enhance the CNT/polymer interfaces. These bonds destroy the perfect atomic structures of a CNT and degrade its mechanical properties. We use atomistic simulations to study the effect of hydrogenization on the mechanical properties of single-wall carbon nanotubes. The elastic modulus of CNTs gradually decreases with the increasing functionalization (percentage of C-H bonds). However, both the strength and ductility drop sharply at a small percentage of functionalization, reflecting their sensitivity to C-H bonds. The cluster C-H bonds forming two rings leads to a significant reduction in the strength and ductility. The effect of carbonization has essentially the same effect as hydrogenization.

  3. Mechanical Properties of Autoclaved Shell-aggregate

    Institute of Scientific and Technical Information of China (English)

    MA Hailong; CUI Chong; LI Xing; Pierre Chevrier; Vanessa Bouchart; TANG Feng

    2011-01-01

    Waste solid propylene oxide sludge(POS)and fly ash were used as main raw material to prepare propylene oxide sludge aggregate(POSA)under the condition of autoclaved(180 ℃,1.0 MPa)curing.Three different test methods namely cylinder compressive strength(CCS),individual aggregate compressive strength(IACS)and strength contribution rate(SCR)proposed were used to characterize the mechanical properties of the autoclaved POSA.POS shell-aggregate with SCR of 94% were prepared under the hydrothermal synthesis and autoclaved curing.The experimental results indicate that CCS and IACS have good consistency in characterizing mechanical properties of POSA.It is suggested that SCR not only can characterize the strength of POSA core,but also can reflect the effect of shell on the performance of POSA.By means of least square method,relationships between CCS and IACS,CCS and SCR,IACS and SCR were deduced.

  4. New approach of eggshell mechanical properties determinantion

    Directory of Open Access Journals (Sweden)

    Libor Severa

    2010-01-01

    Full Text Available The paper describes a new approach for determination of mechanical properties of hen’s eggshell. The suitability and applicability of a Berkovich indentation is discussed. The eggshells were tested in the area surrounding equator line. The deformation modes active during indentation have been examinined from the shape of load-displacement curves. According to measured dependencies, the eggshel shown an viscous-elastic deformation.The values of Young’s modulus E obtained from radial and tangential directions did not vary significantly. This fact shows on isotropic nature of eggshell structure. It was found that values of E do not significantly change neither around the cir­cum­fe­ren­ce of the equator. The values obtained within this research correspond to values reported in literature and obtained on macroscopic samples. Nanoindentation was found to be a precise and powerful tool, suitable for determining local variations of mechanical properties of eggshells.

  5. Mechanical Properties of Infrared Transmitting Materials

    Science.gov (United States)

    1978-01-01

    Theory of the Elasticity," 4th Edition, Dover Publ. Co., New York, N.Y., 1944. Marriott, J. B., and G. Rowden, "The Erosion of a Cobalt - Chromium Alloy...alumina (A1203), spinel (magnesium aluminate ), magnesia (MgO), yttria (Y203), as well as chemical vapor deposition (CVD) silicon carbide, CVD...known to be a problem. Because of their thermal and mechanical properties, alumina and magnesium aluminate (spinel) show, or can show, erosion

  6. Improvement of mechanical properties of chitosan film

    OpenAIRE

    Krkić, Nevena; Lazić, Vera; Šuput, Danijela

    2012-01-01

    This paper investigates the intensity of the influence which poly (ethylene oxide) and poly(ethylene glycol) additions have on the mechanical and structural properties of chitosan films. The films based on highly viscous and medium viscous chitosan were produced under laboratory conditions. Poly(ethylene oxide), with the average molecular weight of 100 000, and poly (ethylene glycol), with the average molecular weight of 400, were added to the films. The infrared spectrums of produced films w...

  7. Mechanical Properties of Palm Fiber Mattress

    Science.gov (United States)

    Li, Yu-Qian; Wu, Jia-Yu; Gu, Hao-Wei; Chen, Zong-Yong; Shi, Xiao-Bing; Liao, Ting-Mao; An, Cheng; Yuan, Hong; Liu, Ren-Huai

    2016-05-01

    Palm fiber mattress is increasingly accepted by many families. This study aims at evaluating the mechanical properties of palm fiber mattress. Two experiments were conduct to investigate the Young's modulus of palm fiber mattress in three directions. In addition, finite element models were established to characterize palm fiber mattress under uniform distributed pressure. Finally, results from finite element analysis are presented to illustrate that the thick mattress will stick with human body curve perfectly, which can support vertebral column effectively.

  8. Electrical properties of mechanically activated zinc oxide

    Directory of Open Access Journals (Sweden)

    Vojisavljević K.

    2006-01-01

    Full Text Available Microstructural properties of a commercial zinc oxide powder were modified by mechanical activation in a high-energy vibro-mill. The obtained powders were dry pressed and sintered at 1100°C for 2 h. The electrical properties of grain boundaries of obtained ZnO ceramics were studied using an ac impedance analyzer. For that purpose, the ac electrical response was measured in the temperature range from 23 to 240°C in order to determine the resistance and capacitance of grain boundaries. The activation energies of conduction were obtained using an Arrhenius equation. Donor densities were calculated from Mott-Schottky measurements. The influence of microstructure, types and concentrations of defects on electrical properties was discussed.

  9. Temperature dependence of poly(lactic acid) mechanical properties

    DEFF Research Database (Denmark)

    Zhou, Chengbo; Guo, Huilong; Li, Jingqing

    2016-01-01

    The mechanical properties of polymers are not only determined by their structures, but also related to the temperature field in which they are located. The yield behaviors, Young's modulus and structures of injection-molded poly(lactic acid) (PLA) samples after annealing at different temperatures...

  10. Mechanical Properties of Additively Manufactured Thick Honeycombs

    Directory of Open Access Journals (Sweden)

    Reza Hedayati

    2016-07-01

    Full Text Available Honeycombs resemble the structure of a number of natural and biological materials such as cancellous bone, wood, and cork. Thick honeycomb could be also used for energy absorption applications. Moreover, studying the mechanical behavior of honeycombs under in-plane loading could help understanding the mechanical behavior of more complex 3D tessellated structures such as porous biomaterials. In this paper, we study the mechanical behavior of thick honeycombs made using additive manufacturing techniques that allow for fabrication of honeycombs with arbitrary and precisely controlled thickness. Thick honeycombs with different wall thicknesses were produced from polylactic acid (PLA using fused deposition modelling, i.e., an additive manufacturing technique. The samples were mechanically tested in-plane under compression to determine their mechanical properties. We also obtained exact analytical solutions for the stiffness matrix of thick hexagonal honeycombs using both Euler-Bernoulli and Timoshenko beam theories. The stiffness matrix was then used to derive analytical relationships that describe the elastic modulus, yield stress, and Poisson’s ratio of thick honeycombs. Finite element models were also built for computational analysis of the mechanical behavior of thick honeycombs under compression. The mechanical properties obtained using our analytical relationships were compared with experimental observations and computational results as well as with analytical solutions available in the literature. It was found that the analytical solutions presented here are in good agreement with experimental and computational results even for very thick honeycombs, whereas the analytical solutions available in the literature show a large deviation from experimental observation, computational results, and our analytical solutions.

  11. Beyond Quantum Mechanics and General Relativity

    CERN Document Server

    Gregori, Andrea

    2010-01-01

    In this note I present the main ideas of my proposal about the theoretical framework that could underlie, and therefore "unify", Quantum Mechanics and Relativity, and I briefly summarize the implications and predictions.

  12. Measurements and Characterizations of Mechanical Properties of Human Skins

    Science.gov (United States)

    Song, Han Wook; Park, Yon Kyu

    A skin is an indispensible organ for humans because it contributes to metabolism using its own biochemical functions and protects the human body from external stimuli. Recently, mechanical properties such as a thickness, a friction and an elastic coefficient have been used as a decision index in the skin physiology and in the skin care market due to the increased awareness of wellbeing issues. In addition, the use of mechanical properties is known to have good discrimination ability in the classification of human constitutions, which are used in the field of an alternative medicine. In this study, a system that measures mechanical properties such as a friction and an elastic coefficient is designed. The equipment consists of a load cell type (manufactured by the authors) for the measurements of a friction coefficient, a decompression tube for the measurement of an elastic coefficient. Using the proposed system, the mechanical properties of human skins from different constitutions were compared, and the relative repeatability error for measurements of mechanical properties was determined to be less than 2%. Combining the inspection results of medical doctors in the field of an alternative medicine, we could conclude that the proposed system might be applicable to a quantitative constitutional diagnosis between human constitutions within an acceptable level of uncertainty.

  13. Mechanical Properties of Heavy Duty Epoxy Coatings

    OpenAIRE

    Reinoso Rodríguez, Rosa

    2013-01-01

    In a first stage, the composition of epoxy coatings is discussed with special focus on the mechanism of curing and the chemistry of curing agents and their advantages and downturns in prospect to their use in the manufacture of epoxy resins. Then literature on the causes of increased brittleness, cracking and degradation of epoxy resins was studied, especially in relation to evolution of the resins in the glassy state, hydrothermal aging and also in relation to chemical aging. ...

  14. On the mechanical properties of sintered metallic fibre structures

    Energy Technology Data Exchange (ETDEWEB)

    Veyhl, C., E-mail: Christoph.Veyhl@uon.edu.au [The University of Newcastle, School of Engineering, Centre for Mass and Thermal Transport in Engineering Materials, Callaghan, NSW 2308 (Australia); Fiedler, T., E-mail: Thomas.Fiedler@newcastle.edu.au [The University of Newcastle, School of Engineering, Centre for Mass and Thermal Transport in Engineering Materials, Callaghan, NSW 2308 (Australia); Jehring, U., E-mail: Ulrike.Jehring@ifam-dd.fraunhofer.de [Fraunhofer Institute for Manufacturing Technology and Advanced Materials, Branch Lab Dresden, 01277 Dresden, Winterbergstr. 28 (Germany); Andersen, O., E-mail: Olaf.Andersen@ifam-dd.fraunhofer.de [Fraunhofer Institute for Manufacturing Technology and Advanced Materials, Branch Lab Dresden, 01277 Dresden, Winterbergstr. 28 (Germany); Bernthaler, T., E-mail: Timo.Bernthaler@htw-aalen.de [University of Applied Sciences Aalen, Department of Surface Engineering and Materials Science, Faculty of Mechanical and Material Engineering, Beethovenstr. 1, 73430 Aalen (Germany); Belova, I.V., E-mail: Irina.Belova@newcastle.edu.au [The University of Newcastle, School of Engineering, Centre for Mass and Thermal Transport in Engineering Materials, Callaghan, NSW 2308 (Australia); Murch, G.E., E-mail: Graeme.Murch@newcastle.edu.au [The University of Newcastle, School of Engineering, Centre for Mass and Thermal Transport in Engineering Materials, Callaghan, NSW 2308 (Australia)

    2013-02-01

    The present study investigates mechanical properties of a novel sintered metallic fibre structure with different relative densities (i.e. 0.19, 0.27, and 0.46). The compressive mechanical properties Young's modulus, Poisson's ratio and 0.2% offset yield stress are determined. For this purpose, state of the art simulations are performed based on the real material structure using micro-computed tomography images. Computed results are compared with experimental uni-axial compression tests and good agreement between both methods is observed. Numerical analysis allows the investigation of directional dependence and mechanical anisotropy is observed to be governed by the fibre orientation. In addition, Young's modulus and 0.2% offset yield stress increase with rising relative density.

  15. Aggregate of nanoparticles: rheological and mechanical properties

    Directory of Open Access Journals (Sweden)

    Wang Yu

    2011-01-01

    Full Text Available Abstract The understanding of the rheological and mechanical properties of nanoparticle aggregates is important for the application of nanofillers in nanocompoistes. In this work, we report a rheological study on the rheological and mechanical properties of nano-silica agglomerates in the form of gel network mainly constructed by hydrogen bonds. The elastic model for rubber is modified to analyze the elastic behavior of the agglomerates. By this modified elastic model, the size of the network mesh can be estimated by the elastic modulus of the network which can be easily obtained by rheology. The stress to destroy the aggregates, i.e., the yield stress (σy , and the elastic modulus (G' of the network are found to be depended on the concentration of nano-silica (ϕ, wt.% with the power of 4.02 and 3.83, respectively. Via this concentration dependent behavior, we can extrapolate two important mechanical parameters for the agglomerates in a dense packing state (ϕ = 1: the shear modulus and the yield stress. Under large deformation (continuous shear flow, the network structure of the aggregates will experience destruction and reconstruction, which gives rise to fluctuations in the viscosity and a shear-thinning behavior.

  16. Design of monoliths through their mechanical properties.

    Science.gov (United States)

    Podgornik, Aleš; Savnik, Aleš; Jančar, Janez; Krajnc, Nika Lendero

    2014-03-14

    Chromatographic monoliths have several interesting properties making them attractive supports for analytics but also for purification, especially of large biomolecules and bioassemblies. Although many of monolith features were thoroughly investigated, there is no data available to predict how monolith mechanical properties affect its chromatographic performance. In this work, we investigated the effect of porosity, pore size and chemical modification on methacrylate monolith compression modulus. While a linear correlation between pore size and compression modulus was found, the effect of porosity was highly exponential. Through these correlations it was concluded that chemical modification affects monolith porosity without changing the monolith skeleton integrity. Mathematical model to describe the change of monolith permeability as a function of monolith compression modulus was derived and successfully validated for monoliths of different geometries and pore sizes. It enables the prediction of pressure drop increase due to monolith compressibility for any monolith structural characteristics, such as geometry, porosity, pore size or mobile phase properties like viscosity or flow rate, based solely on the data of compression modulus and structural data of non-compressed monolith. Furthermore, it enables simple determination of monolith pore size at which monolith compressibility is the smallest and the most robust performance is expected. Data of monolith compression modulus in combination with developed mathematical model can therefore be used for the prediction of monolith permeability during its implementation but also to accelerate the design of novel chromatographic monoliths with desired hydrodynamic properties for particular application.

  17. PICA Variants with Improved Mechanical Properties

    Science.gov (United States)

    Thornton, Jeremy; Ghandehari, Ehson M.; Fan, Wenhong; Stackpoole, Margaret; Chavez-Garcia, Jose

    2011-01-01

    Phenolic Impregnated Carbon Ablator (PICA) is a member of the family of Lightweight Ceramic Ablators (LCAs) and was developed at NASA Ames Research Center as a thermal protection system (TPS) material for the Stardust mission probe that entered the Earth s atmosphere faster than any other probe or vehicle to date. PICA, carbon fiberform base and phenolic polymer, shows excellent thermal insulative properties at heating rates from about 250 W/sq cm to 1000 W/sq cm. The density of standard PICA - 0.26 g/cu cm to 0.28 g/cu cm - can be changed by changing the concentration of the phenolic resin. By adding polymers to the phenolic resin before curing it is possible to significantly improve the mechanical properties of PICA without significantly increasing the density.

  18. Design and mechanical properties of insect cuticle.

    Science.gov (United States)

    Vincent, Julian F V; Wegst, Ulrike G K

    2004-07-01

    Since nearly all adult insects fly, the cuticle has to provide a very efficient and lightweight skeleton. Information is available about the mechanical properties of cuticle-Young's modulus of resilin is about 1 MPa, of soft cuticles about 1 kPa to 50 MPa, of sclerotised cuticles 1-20 GPa; Vicker's Hardness of sclerotised cuticle ranges between 25 and 80 kgf mm(-2); density is 1-1.3 kg m(-3)-and one of its components, chitin nanofibres, the Young's modulus of which is more than 150 GPa. Experiments based on fracture mechanics have not been performed although the layered structure probably provides some toughening. The structural performance of wings and legs has been measured, but our understanding of the importance of buckling is lacking: it can stiffen the structure (by elastic postbuckling in wings, for example) or be a failure mode. We know nothing of fatigue properties (yet, for instance, the insect wing must undergo millions of cycles, flexing or buckling on each cycle). The remarkable mechanical performance and efficiency of cuticle can be analysed and compared with those of other materials using material property charts and material indices. Presented in this paper are four: Young's modulus-density (stiffness per unit weight), specific Young's modulus-specific strength (elastic hinges, elastic energy storage per unit weight), toughness-Young's modulus (fracture resistance under various loading conditions), and hardness (wear resistance). In conjunction with a structural analysis of cuticle these charts help to understand the relevance of microstructure (fibre orientation effects in tendons, joints and sense organs, for example) and shape (including surface structure) of this fibrous composite for a given function. With modern techniques for analysis of structure and material, and emphasis on nanocomposites and self-assembly, insect cuticle should be the archetype for composites at all levels of scale.

  19. Mechanical properties of crepe paper and chickpaper

    Directory of Open Access Journals (Sweden)

    Ľubomír KUBÍK

    2016-06-01

    Full Text Available The paper deals with the evaluation of the mechanical properties of the crepe paper and chickpaper. The thickness of crepe paper was 300 m with the surface mass 150 g*m-2 and chickpaper paper thickness was 100 m with the surface mass 40 g*m-2. Crepe paper and chickpaper are usually used for chicken breeding. Longitudinal and transversal tensile properties were studied. The tensile behavior was monitored on the motorized test stand ANDILOG STENTOR 1000 (Andilog Technologies, Vitrolles, France.There were measured the tensile properties as modulus of elasticity, maximal elongation, maximal tensile force, tensile strengths, tensile index and strain at break of the longitudinal and transversal samples by testing paper strips. Mean values of the maximal elongation b of longitudinal chickpaper samples were three times smaller than maximal elongation of transversal samples. Mean values of maximal tensile force Ft, tensile strength btensile indexwand maximal strain at break T of longitudinal chickpaper samples were two times smaller than maximal quantities of transversal samples. Mean values of the tensile modulus of elasticity of longitudinal and transversal chickpaper samples were almost equal. Chickpaper mechanical properties in tension were different in the longitudinal and transversal direction of the original paper surface. Mean values of the maximal elongation b and maximal strain at break T of longitudinal crepe paper samples were sixty times smaller than maximal elongation and maximal strain at break of transversal samples. Mean values of maximal tensile force Ft, tensile strength bandtensile indexwof longitudinal crepe paper samples were fourth times smaller than maximal quantities of transversal samples. Mean values of the tensile modulus of elasticity of longitudinal samples of crepe paper were thirty eight times smaller than values of transversal samples.

  20. Analysis of Mechanical Properties for GEM Foil

    CERN Document Server

    Chin, Yuk Ming

    2016-01-01

    In view of new assembly technique of the GEM detector; in which three foils stack is stretched to get the uniform gaps among the foils. We studied the mechanical properties of the foil material. We conditioned the samples in different environments to make them extra dry and wet. As holes are the major source of the charge amplification their deformation can effect the detector performance. Therefore in our studies we also studied at which level of the stress the holes deformation is seen. These tensile and holes deformation studies can help to optimize the stress during detector assembly.

  1. Passive mechanical properties of ovine rumen tissue

    Science.gov (United States)

    Waite, Stephen J.; Cater, John E.; Walker, Cameron G.; Amirapu, Satya; Waghorn, Garry C.; Suresh, Vinod

    2016-05-01

    Mechanical and structural properties of ovine rumen tissue have been determined using uniaxial tensile testing of tissue from four animals at five rumen locations and two orientations. Animal and orientation did not have a significant effect on the stress-strain response, but there was a significant difference between rumen locations. Histological studies showed two orthogonal muscle layers in all regions except the reticulum, which has a more isotropic structure. A quasi-linear viscoelastic model was fitted to the relaxation stage for each region. Model predictions of the ramp stage had RMS errors of 13-24% and were within the range of the experimental data.

  2. Investigation on Mechanical Property of Seamless Pipe

    Institute of Scientific and Technical Information of China (English)

    ZHAO Li-ming; YANG Xiao-yong; LIU Ye

    2004-01-01

    The mechanical properties of the steel pipe rolled with continuously casting round billet after determining the chemical composition in steel were studied. The results show that the total reduction ratio should be higher than 5.2 when the line pipes of grade B, grade 20 and other general seamless pipe were rolled with continuously casting round billet. And the total reduction ratio should be higher than 10.2 and the grain size should be controlled more than grade 7 for casing of oil countryside tubular goods (OCTG).

  3. Photochromic properties and reaction mechanism of naphthopyran

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The photochromic properties and reaction mechanism of title compounds have been examined with steady method on compounds 3-phenyl-3-[3-methylbenzothiophene-2-yl]-3H- naphtho[2,1-b]pyran (1) and 3-phenyl-3-[benzofuran-2-yl]-3H-naphtho[2,1-b]pyran (2) and nanosecond laser flash photolysis techniques on compound 3-phenyl-3-[1,2-dimethylindol-3-yl]- 3H-naphtho[2,1-b]pyran (3). The influence of oxygen on transient spectra and decay kinetics of compound 3 has been investigated. Both excited singlet state and triplet state are involved in the photochromic mechanism of compound 3. The influence of molecular structure on photochromic behavior has been studied also. Decay kinetics indicated that the lifetime of colored forms of 1 and 2 were several orders of magnitude longer than that of 3.

  4. Photochromic properties and reaction mechanism of naphthopyran

    Institute of Scientific and Technical Information of China (English)

    潘桂兰; 魏景强; 朱爱平; 明阳福; 樊美公; 姚思德

    2001-01-01

    The photochromic properties and reaction mechanism of title compounds have been examined with steady method on compounds 3-phenyl-3-[3-methylbenzothiophene-2-yl]-3H-naphtho[2,1-b]pyran (1) and 3-phenyl-3-[benzofuran-2-yl]-3H-naphtho[2,1-b]pyran (2) and nanosecond laser flash photolysis techniques on compound 3-phenyl-3-[1,2-dimethylindol-3-yl]-3H-naphtho[2,1-b]pyran (3). The influence of oxygen on transient spectra and decay kinetics of compound 3 has been investigated. Both excited singlet state and triplet state are involved in the photochromic mechanism of compound 3. The influence of molecular structure on photochromic behavior has been studied also. Decay kinetics indicated that the lifetime of colored forms of 1 and 2 were several orders of magnitude longer than that of 3.

  5. Iatrogenic pneumothorax related to mechanical ventilation

    OpenAIRE

    2014-01-01

    Pneumothorax is a potentially lethal complication associated with mechanical ventilation. Most of the patients with pneumothorax from mechanical ventilation have underlying lung diseases; pneumothorax is rare in intubated patients with normal lungs. Tension pneumothorax is more common in ventilated patients with prompt recognition and treatment of pneumothorax being important to minimize morbidity and mortality. Underlying lung diseases are associated with ventilator-related pneumothorax with...

  6. Coronal Jet Plasma Properties and Acceleration Mechanisms

    Science.gov (United States)

    Farid, Samaiyah; Reeves, Kathy; Savcheva, Antonia; Soto, Natalia

    2017-08-01

    Coronal jets are transient eruptions of plasma typically characterized by aprominent long spire and a bright base, and sometimes accompanied by a small filament. Jets are thought to be produced by magnetic reconnection when small-scale bipolar magnetic fields emerge into an overlying coronal field or move into a locally unipolar region. Coronal jets are commonly divided into two categories: standard jets and blowout jets, and are found in both quiet and active regions. The plasma properties of jets vary across type and location, therefore understanding the underlying acceleration mechanisms are difficult to pin down. In this work, we examine both blow-out and standard jets using high resolution multi-wavelength data. Although reconnection is commonly accepted as the primary acceleration mechanism, we also consider the contribution chromospheric evaporation to jet formation. We use seven coronal channels from SDO/AIA , Hinode/XRT Be-thin and IRIS slit-jaw data. In addition, we separate the Fe-XVIII line from the SDO/94Å channel. We calculate plasma properties including velocity, Alfven speed, and density as a function of wavelength and Differential Emission Measure (DEM). Finally, we explore the magnetic topology of the jets using Coronal Modeling System (CMS) to construct potential and non-linear force free models based on the flux rope insertion method.

  7. Elastic properties and mechanical tension of graphene

    Science.gov (United States)

    Ramírez, R.; Herrero, C. P.

    2017-01-01

    Room-temperature simulations of graphene have been performed as a function of the mechanical tension of the layer. Finite-size effects are accurately reproduced by an acoustic dispersion law for the out-of-plane vibrations that, in the long-wave limit, behaves as ρ ω2=σ k2+κ k4 . The fluctuation tension σ is finite (˜0.1 N/m) even when the external mechanical tension vanishes. Transverse vibrations imply a duplicity in the definition of the elastic constants of the layer, as observables related to the real area of the surface may differ from those related to the in-plane projected area. This duplicity explains the variability of experimental data on the Young modulus of graphene based on electron spectroscopy, interferometric profilometry, and indentation experiments.

  8. Mechanical properties of the beetle elytron, a biological composite material

    Science.gov (United States)

    We determined the relationship between composition and mechanical properties of elytral (modified forewing) cuticle of the beetles Tribolium castaneum and Tenebrio molitor. Elytra of both species have similar mechanical properties at comparable stages of maturation (tanning). Shortly after adult ecl...

  9. Variability of the mechanical properties of bone, and its evolutionary consequences

    OpenAIRE

    Currey, John D.; Pitchford, Jonathan W; Paul D Baxter

    2006-01-01

    The relative variabilities (coefficient of variation (CV)) of 10 different mechanical properties of compact bone were determined from 2166 measurements. All measures of variability were made on a minimum of four specimens from any bone. Three pre-yield properties had a CV of about 12%. Six post-yield properties had CVs varying from 24 to 46%. Pre-yield properties increase as a function of mineral content, whereas post-yield properties decrease. These differences give insight into mechanical p...

  10. Mechanical Properties Comparing Composite Fiber Length to Amalgam

    Directory of Open Access Journals (Sweden)

    Richard C. Petersen

    2016-01-01

    Full Text Available Photocure fiber-reinforced composites (FRCs with varying chopped quartz-fiber lengths were incorporated into a dental photocure zirconia-silicate particulate-filled composite (PFC for mechanical test comparisons with a popular commercial spherical-particle amalgam. FRC lengths included 0.5-mm, 1.0 mm, 2.0 mm, and 3.0 mm all at a constant 28.2 volume percent. Four-point fully articulated fixtures were used according to American Standards Test Methods with sample dimensions of 2×2×50 mm3 across a 40 mm span to provide sufficient Euler flexural bending and prevent top-load compressive shear error. Mechanical properties for flexural strength, modulus, yield strength, resilience, work of fracture, critical strain energy release, critical stress intensity factor, and strain were obtained for comparison. Fiber length subsequently correlated with increasing all mechanical properties, p<1.1×10-5. Although the modulus was significantly statistically higher for amalgam than all composites, all FRCs and even the PFC had higher values than amalgam for all other mechanical properties. Because amalgams provide increased longevity during clinical use compared to the standard PFCs, modulus would appear to be a mechanical property that might sufficiently reduce margin interlaminar shear stress and strain-related microcracking that could reduce failure rates. Also, since FRCs were tested with all mechanical properties that statistically significantly increased over the PFC, new avenues for future development could be provided toward surpassing amalgam in clinical longevity.

  11. Environmental properties set cell mechanics and morphology

    Science.gov (United States)

    Janmey, Paul

    2012-02-01

    Many cell types are sensitive to mechanical signals that are produced either by application of exogenous force to their surfaces, or by the resistance that their surroundings place on forces generated by the cells themselves. Cell morphology, motility, proliferation, and protein expression all change in response to substrate stiffness. Changing the elastic moduli of substrates alters the formation of focal adhesions, the assembly of actin filaments into bundles, and the stability of intermediate filaments. The range of stiffness over which different primary cell types respond can vary over a wide range and generally reflects the elastic modulus of the tissue from which these cells were isolated. Mechanosensing depends on the type of adhesion receptor by which the cell binds, and therefore on both the molecular composition of the extracellular matrix and the nature of its link to the cytoskeleton. Many cell types can alter their own stiffness to match that of the substrate to which they adhere. The maximal elastic modulus that cells such as fibroblasts can attain is similar to that of crosslinked actin networks at the concentrations in the cell cortex. The precise mechanisms of mechanosensing are not well defined, but they presumably require an elastic connection between cell and substrate, mediated by transmembrane proteins. The viscoelastic properties of different extracellular matrices and cytoskeletal elements strongly influence the response of cells to mechanical signals, and the unusual non-linear elasticity of many biopolymer gels, characterized by strain-stiffening, leads to novel mechanisms by which cells alter their stiffness by engagement of molecular motors that produce internal stresses. Cell cortical elasticity is dominated by cytoskeletal polymer networks and can be modulated by internal tension. Simultaneous control of substrate stiffness and adhesive patterns suggests that stiffness sensing occurs on a length scale much larger than single molecular

  12. Tannins, peptic ulcers and related mechanisms.

    Science.gov (United States)

    de Jesus, Neyres Zinia Taveira; de Souza Falcão, Heloina; Gomes, Isis Fernandes; de Almeida Leite, Thiago Jose; de Morais Lima, Gedson Rodrigues; Barbosa-Filho, Jose Maria; Tavares, Josean Fechine; da Silva, Marcelo Sobral; de Athayde-Filho, Petrônio Filgueiras; Batista, Leonia Maria

    2012-01-01

    This review of the current literature aims to study correlations between the chemical structure and gastric anti-ulcer activity of tannins. Tannins are used in medicine primarily because of their astringent properties. These properties are due to the fact that tannins react with the tissue proteins with which they come into contact. In gastric ulcers, this tannin-protein complex layer protects the stomach by promoting greater resistance to chemical and mechanical injury or irritation. Moreover, in several experimental models of gastric ulcer, tannins have been shown to present antioxidant activity, promote tissue repair, exhibit anti Helicobacter pylori effects, and they are involved in gastrointestinal tract anti-inflammatory processes. The presence of tannins explains the anti-ulcer effects of many natural products.

  13. Tannins, Peptic Ulcers and Related Mechanisms

    Directory of Open Access Journals (Sweden)

    Leonia Maria Batista

    2012-03-01

    Full Text Available This review of the current literature aims to study correlations between the chemical structure and gastric anti-ulcer activity of tannins. Tannins are used in medicine primarily because of their astringent properties. These properties are due to the fact that tannins react with the tissue proteins with which they come into contact. In gastric ulcers, this tannin-protein complex layer protects the stomach by promoting greater resistance to chemical and mechanical injury or irritation. Moreover, in several experimental models of gastric ulcer, tannins have been shown to present antioxidant activity, promote tissue repair, exhibit anti Helicobacter pylori effects, and they are involved in gastrointestinal tract anti-inflammatory processes. The presence of tannins explains the anti-ulcer effects of many natural products.

  14. Chirality: a relational geometric-physical property.

    Science.gov (United States)

    Gerlach, Hans

    2013-11-01

    The definition of the term chirality by Lord Kelvin in 1893 and 1904 is analyzed by taking crystallography at that time into account. This shows clearly that chirality is a relational geometric-physical property, i.e., two relations between isometric objects are possible: homochiral or heterochiral. In scientific articles the relational term chirality is often mistaken for the two valued measure for the individual (absolute) sense of chirality, an arbitrary attributive term.

  15. Mechanical properties of stabilized artificial organic soil

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    In order to study the influence of organic matter on the mechanical properties of stabilized soil and the effect of XGL2005 on stabilizing organic soil,unconfined compressive strength tests were carried out.Test results indicated that the strength of stabilized soil decreased in the form of a logarithmic function as the organic matter content increased.In contrast,the strength increased in the form of a power function as the content of the stabilization agent increased.The strength of cement stabilized organic soil was reinforced greatly by adding the stabilizer XGL2005.Based on the law obtained from the test,a strength prediction model was established by regression analysis.The model included the influence of the curing time,the content of the cement,the organic matter content and the stabilization agent on the strength of stabilized soil.

  16. Mechanical Properties of Sheared Wet Granular Piles

    Science.gov (United States)

    Seemann, Ralf; Schaber, Marc; Karmakar, Somnath; Hippler, Anna-Lena; Scheel, Mario; di Michiel, Marco; Brinkmann, Martin

    2015-03-01

    The mechanical properties of dry and wet granulates are explored when being sheared with a parabolic profile at constant shear volume. The dissipated energy increase linearly with external pressure both for a wet and a dry granulate. However, the dissipated energy for wet a granulate has a finite value for the limiting case of vanishing external pressure and increases slower with external pressure compared to the dry granulate. Using a down sized version of the shear cell the reorganization of a granulate and liquid is additionally imaged in real time using x-ray micro-tomography. With the insight from x-ray tomography the contribution of the breaking capillary bridges to the dissipated energy can be analyzed. We could also shed light on the influence of dilatation effects on the dissipated energy upon inverting the shear direction.

  17. Mechanical properties of high-strength concrete

    Science.gov (United States)

    Mokhtarzadeh, Alireza

    This report summarizes an experimental program conducted to investigate production techniques and mechanical properties of high strength concrete in general and to provide recommendations for using these concretes in manufacturing precast/prestressed bridge girders. Test variables included total amount and composition of cementitious material (portland cement, fly ash, and silica fume), type and brand of cement, type of silica fume (dry densified and slurry), type and brand of high-range water-reducing admixture, type of aggregate, aggregate gradation, maximum aggregate size, and curing. Tests were conducted to determine the effects of these variables on changes in compressive strength and modulus of elasticity over time, splitting tensile strength, modulus of rupture, creep, shrinkage, and absorption potential (as an indirect indicator of permeability). Also investigated were the effects of test parameters such as mold size, mold material, and end condition. Over 6,300 specimens were cast from approximately 140 mixes over a period of 3 years.

  18. Conductive magnetorheological elastomer: fatigue dependent impedance-mechanic coupling properties

    Science.gov (United States)

    Wang, Yu; Xuan, Shouhu; Ge, Lin; Wen, Qianqian; Gong, Xinglong

    2017-01-01

    This work investigated the relationship between the impedance properties and dynamic mechanical properties of magnetorheological elastomers (MREs) under fatigue loading. The storage modulus and the impedance properties of MREs were highly influenced by the pressure and magnetic field. Under the same experimental condition, the two characteristics exhibited similar fatigue dependent change trends. When pressure was smaller than 10 N, the capacitance of MRE could be divided into four sections with the increase of the cyclic numbers. The relative equivalent circuit model was established to fit the experimental results of the impedance spectra. Each parameter of circuit element reflected the change of fatigue loading, relative microstructure of MRE, MRE-electrode interface layer, respectively. Based on the above analysis, the real-time and nondestructive impedance method was demonstrated to be high potential on detecting the fatigue of the MRE device.

  19. Consistency Relations for the Conformal Mechanism

    CERN Document Server

    Creminelli, Paolo; Khoury, Justin; Simonović, Marko

    2012-01-01

    We systematically derive the consistency relations associated to the non-linearly realized symmetries of theories with spontaneously broken conformal symmetry but with a linearly-realized de Sitter subalgebra. These identities relate (N+1)-point correlation functions with a soft external Goldstone to N-point functions. These relations have direct implications for the recently proposed conformal mechanism for generating density perturbations in the early universe. We study the observational consequences, in particular a novel one-loop contribution to the four-point function, relevant for the stochastic scale-dependent bias and CMB mu-distortion.

  20. Consistency relations for the conformal mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Creminelli, Paolo [Abdus Salam International Centre for Theoretical Physics, Strada Costiera 11, 34151, Trieste (Italy); Joyce, Austin; Khoury, Justin [Center for Particle Cosmology, Department of Physics and Astronomy, University of Pennsylvania, Philadelphia, PA 19104 (United States); Simonović, Marko, E-mail: creminel@ictp.it, E-mail: joyceau@sas.upenn.edu, E-mail: jkhoury@sas.upenn.edu, E-mail: marko.simonovic@sissa.it [SISSA, via Bonomea 265, 34136, Trieste (Italy)

    2013-04-01

    We systematically derive the consistency relations associated to the non-linearly realized symmetries of theories with spontaneously broken conformal symmetry but with a linearly-realized de Sitter subalgebra. These identities relate (N+1)-point correlation functions with a soft external Goldstone to N-point functions. These relations have direct implications for the recently proposed conformal mechanism for generating density perturbations in the early universe. We study the observational consequences, in particular a novel one-loop contribution to the four-point function, relevant for the stochastic scale-dependent bias and CMB μ-distortion.

  1. Mechanical Models of Fault-Related Folding

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, A. M.

    2003-01-09

    The subject of the proposed research is fault-related folding and ground deformation. The results are relevant to oil-producing structures throughout the world, to understanding of damage that has been observed along and near earthquake ruptures, and to earthquake-producing structures in California and other tectonically-active areas. The objectives of the proposed research were to provide both a unified, mechanical infrastructure for studies of fault-related foldings and to present the results in computer programs that have graphical users interfaces (GUIs) so that structural geologists and geophysicists can model a wide variety of fault-related folds (FaRFs).

  2. From continuum mechanics to general relativity

    CERN Document Server

    Boehmer, Christian G

    2014-01-01

    Using ideas from continuum mechanics we construct a theory of gravity. We show that this theory is equivalent to Einstein's theory of general relativity; it is also a much faster way of reaching general relativity than the conventional route. Our approach is simple and natural: we form a very general model and then apply two physical assumptions supported by experimental evidence. This easily reduces our construction to a model equivalent to general relativity. Finally, we suggest a simple way of modifying our theory to investigate non-standard space-time symmetries.

  3. Beyond relativity and quantum mechanics: space physics

    Science.gov (United States)

    Lindner, Henry H.

    2011-09-01

    Albert Einstein imposed an observer-based epistemology upon physics. Relativity and Quantum Mechanics limit physics to describing and modeling the observer's sensations and measurements. Their "underlying reality" consists only of ideas that serve to model the observer's experience. These positivistic models cannot be used to form physical theories of Cosmic phenomena. To do this, we must again remove the observer from the center of physics. When we relate motion to Cosmic space instead of to observers and we attempt to explain the causes of Cosmic phenomena, we are forced to admit that Cosmic space is a substance. We need a new physics of space. We can begin by replacing Relativity with a modified Lorentzian-Newtonian model of spatial flow, and Quantum Mechanics with a wave-based theory of light and electrons. Space physics will require the reinterpretation of all known phenomena, concepts, and mathematical models.

  4. Biodegradable compounds: Rheological, mechanical and thermal properties

    Science.gov (United States)

    Nobile, Maria Rossella; Lucia, G.; Santella, M.; Malinconico, M.; Cerruti, P.; Pantani, R.

    2015-12-01

    Recently great attention from industry has been focused on biodegradable polyesters derived from renewable resources. In particular, PLA has attracted great interest due to its high strength and high modulus and a good biocompatibility, however its brittleness and low heat distortion temperature (HDT) restrict its wide application. On the other hand, Poly(butylene succinate) (PBS) is a biodegradable polymer with a low tensile modulus but characterized by a high flexibility, excellent impact strength, good thermal and chemical resistance. In this work the two aliphatic biodegradable polyesters PBS and PLA were selected with the aim to obtain a biodegradable material for the industry of plastic cups and plates. PBS was also blended with a thermoplastic starch. Talc was also added to the compounds because of its low cost and its effectiveness in increasing the modulus and the HDT of polymers. The compounds were obtained by melt compounding in a single screw extruder and the rheological, mechanical and thermal properties were investigated. The properties of the two compounds were compared and it was found that the values of the tensile modulus and elongation at break measured for the PBS/PLA/Talc compound make it interesting for the production of disposable plates and cups. In terms of thermal resistance the compounds have HDTs high enough to contain hot food or beverages. The PLA/PBS/Talc compound can be, then, considered as biodegradable substitute for polystyrene for the production of disposable plates and cups for hot food and beverages.

  5. Thermo-mechanical behavior of bituminous mixtures at low temperatures. Links between the binder characteristics and the mix properties; Comportement thermomecanique des enrobes bitumeux a basses temperatures: relations entre les proprietes du liant et de l'enrobe

    Energy Technology Data Exchange (ETDEWEB)

    Olard, F.

    2003-10-01

    This thesis has been realized within the framework of a partnership between the Ecole Nationale des TPE, APPIA and EUROVIA. The company Total has also been associated to this project. The study deals with the thermo-mechanical behavior of bituminous materials at low temperatures. The aim is to establish the links between the characteristics of the binder and the properties of bituminous mixes at low temperatures, and to better understand the existing low-temperature parameters and criteria for binders (or to propose new ones), related to the in-situ behavior of bituminous mixtures. A large experimental campaign has been carried out so as to fulfill this goal. After a bibliographical study on the rheology and the thermo-mechanical properties of (pure or modified) binders, putties and mixes, the experimental campaign carried out both in the small strain domain and in the large strain domain, is presented. The low temperature behavior of binders has been evaluated with three common fundamental tests: i)the complex modulus determination, ii)the Bending Beam Rheometer and iii)the tensile strength at a constant strain rate and constant temperatures. A new three point bending test on pre-notched bitumen beams has also been developed at the ENTPE. The low-temperature fracture properties of bitumens were studied at constant temperatures and cross-head speeds considering the Linear Elastic Fracture Mechanics (LEFM) assumptions. The thermo-mechanical behavior of bituminous mixtures has been studied by performing i)complex modulus tests, ii)measurements of the coefficient of thermal dilatation and contraction, iii)tensile tests at constant temperatures and strain rates, and iv)Thermal Stress Restrained Specimen Tests. Apart from the determination of some pertinent links between binder and mix properties and discriminating characteristics with regard to the thermal cracking of bituminous mixes at low temperatures, the analysis has also consisted in modeling the behavior of

  6. Mechanical properties of dental restorative materials: relative contribution of laboratory tests Propriedades mecânicas dos materiais dentários restauradores: contribuição relativa dos ensaios laboratoriais

    Directory of Open Access Journals (Sweden)

    Linda Wang

    2003-09-01

    Full Text Available A wide variety of dental products that are launched on the market becomes the correct selection of these materials a difficult task. Although the mechanical properties do not necessarily represent their actual clinical performance, they are used to guide the effects of changes in their composition or processing on these properties. Also, these tests might help somehow the clinician to choose once comparisons between former formulations and new ones, as well as, with the leading brand, are highlighted by manufactures. This paper presents a review of the most important laboratory tests. In this manner, the knowledge of these tests will provide a critical opinion related to the properties of different dental materials.Uma grande variedade de produtos odontológicos que são lançados no mercado faz da seleção do material uma difícil tarefa. Apesar das propriedades mecânicas não representarem necessariamente o seu real desempenho clínico, os testes são utilizados para orientar os efeitos das alterações das composições do material ou a evolução das suas propriedades. Além disso, estas propriedades podem ajudar o clínico de alguma forma na seleção correta, uma vez que a comparação entre as formulações anteriores e as mais recentes, assim como as líderes de mercado são mais destacadas pelos fabricantes. Este artigo apresenta uma revisão dos testes laboratoriais mais importantes. Desta forma, o conhecimento destes ensaios fornecerá uma opinião crítica relacionada às propriedades dos diferentes materiais dentários.

  7. Structural and mechanical properties of mandibular condylar bone.

    Science.gov (United States)

    van Eijden, T M G J; van der Helm, P N; van Ruijven, L J; Mulder, L

    2006-01-01

    The trabecular bone of the mandibular condyle is structurally anisotropic and heterogeneous. We hypothesized that its apparent elastic moduli are also anisotropic and heterogeneous, and depend on trabecular density and orientation. Eleven condyles were scanned with a micro-CT system. Volumes of interest were selected for the construction of finite element models. We simulated compressive and shear tests to determine the principal mechanical directions and the apparent elastic moduli. Compressive moduli were relatively large in directions acting in the sagittal plane, and small in the mediolateral direction. The degree of mechanical anisotropy ranged from 4.7 to 10.8. Shear moduli were largest in the sagittal plane and smallest in the transverse plane. The magnitudes of the moduli varied with the condylar region and were proportional to the bone volume fraction. Furthermore, principal mechanical direction correlated significantly with principal structural direction. It was concluded that variation in trabecular structure coincides with variation in apparent mechanical properties.

  8. Comparison of mechanical properties of surface layers with use of nanoindentation and microindentation tests

    Directory of Open Access Journals (Sweden)

    M. Zeleňák

    2012-07-01

    Full Text Available The objective of the paper is a mutual comparison of different methods for evaluation of mechanical properties of surface layers. Mechanical properties were tested with the use of nanoindentation and microindentation tests. Different loads and constant deformation speed were used in both cases. For the evaluation of mechanical properties, the AISI 304 type Chromium-Nickel steel commonly used in mechanical engineering industry was tested. Knowledge of relations and differences between nano and micromechanical properties is necessary for understanding of mechanical processes continuously occurring in surface layers during cutting processes.

  9. Microstructure characteristics and mechanical properties of rheocasting 7075 aluminum alloy

    Directory of Open Access Journals (Sweden)

    Yang Bin

    2013-09-01

    Full Text Available The microstructure characteristics and mechanical properties of 7075 aluminum alloy produced by a new rheoforming technique, under as-cast and optimized heat treatment conditions, were investigated. The present rheoforming combined the innovatively developed rheocasting process, named as ICSPC (inverted cone-shaped pouring channel process, and the existing HPDC (high pressure die casting process. The experimental results show that the ICSPC can be used to prepare high quality semi-solid slurry for the subsequent die casting. Compared with conventional HPDC process, the ICSPC process can improve the microstructures and mechanical properties of the cast tensile samples. An optimized heat treatment results in significant improvement in ultimate tensile strength. However, the ductility of the samples, both under as-cast and optimized heat treatment conditions, are relatively poor.

  10. Mechanical properties of homogeneous nanofiber composites fabricated by electrospinning

    Science.gov (United States)

    Watanabe, Kentaro; Hotta, Atsushi

    2013-03-01

    A new composite that possesses uniformly dispersed polymeric nanofibers in different polymeric matrix was introduced by using electrospinning. Recently, nanofibers have been actively investigated for fillers for polymeric nano-composites to enhance the mechanical properties of the composites or to get highly functionalize polymer materials. Polyvinyl alcohol (PVA) nanofibers were selected as polymeric fillers and polydimethylsiloxane (PDMS) was used for polymeric matrix. Internally well-dispersed composites were fabricated by this new method, whereas rather anisotropic composites were also made by the traditional sandwich method. The morphology of the composites was analyzed by field emission scanning electron microscopy (FE-SEM). It was found that, in the new internally well-dispersed composites, PVA nanofibers existed from the both surfaces of the polymer matrix, uniformly dispersed in the composite. Isotropic mechanical properties were observed for internally well-dispersed composites, whereas relatively anisotropic characteristics could be observed for the traditionally-made composites.

  11. On the mechanical properties of selenite glass nanocomposites

    Science.gov (United States)

    Bar, Arun Kr.; Kundu, Ranadip; Roy, Debasish; Bhattacharya, Sanjib

    2016-05-01

    In this paper the room temperature micro-hardness of selenite glass-nanocomposites has been measured using a Vickers and Knoop micro hardness tester where the applied load varies from 0.01N to 0.98 N. A significant indentation size effect was observed for each sample at relatively low indentation test loads. The classical Meyer's law and the proportional specimen resistance model were used to analyze the micro-hardness behavior. It was found that the selenite glass-nanocomposite becomes harder with increasing CuI composition and the work hardening coefficient and mechanical properties like Young modulus, E, were also calculated. Our results open the way for the preparation, application and investigation of significant mechanical properties of new type of glass-nanocomposites.

  12. Mechanical properties of timber from wind damaged Norway spruce

    DEFF Research Database (Denmark)

    Hoffmeyer, Preben

    2003-01-01

    . The paper reports on a investigation of the relation between degree of damage and mechanical proper-ties of sawn timber from wind damaged Norway spruce. The project included about 250 bolts from wind damaged trees. The majority of bolts were cut to deliver a full-diameter plank containing the pith...... taken to bending failure and the relations between compression damage and bending strength and stiffness were established. The results showed that significant reductions of bending strength of dry timber are only caused by such wind induced compression damages that are easily recognised at a planed...

  13. Mechanical Properties and Failure of Biopolymers: Atomistic Reactions to Macroscale Response.

    Science.gov (United States)

    Jung, GangSeob; Qin, Zhao; Buehler, Markus J

    2015-01-01

    The behavior of chemical bonding under various mechanical loadings is an intriguing mechanochemical property of biological materials, and the property plays a critical role in determining their deformation and failure mechanisms. Because of their astonishing mechanical properties and roles in constituting the basis of a variety of physiologically relevant materials, biological protein materials have been intensively studied. Understanding the relation between chemical bond networks (structures) and their mechanical properties offers great possibilities to enable new materials design in nanotechnology and new medical treatments for human diseases. Here we focus on how the chemical bonds in biological systems affect mechanical properties and how they change during mechanical deformation and failure. Three representative cases of biomaterials related to the human diseases are discussed in case studies, including: amyloids, intermediate filaments, and collagen, each describing mechanochemical features and how they relate to the pathological conditions at multiple scales.

  14. Nondestructive measurement of esophageal biaxial mechanical properties utilizing sonometry

    Science.gov (United States)

    Aho, Johnathon M.; Qiang, Bo; Wigle, Dennis A.; Tschumperlin, Daniel J.; Urban, Matthew W.

    2016-07-01

    Malignant esophageal pathology typically requires resection of the esophagus and reconstruction to restore foregut continuity. Reconstruction options are limited and morbid. The esophagus represents a useful target for tissue engineering strategies based on relative simplicity in comparison to other organs. The ideal tissue engineered conduit would have sufficient and ideally matched mechanical tolerances to native esophageal tissue. Current methods for mechanical testing of esophageal tissues both in vivo and ex vivo are typically destructive, alter tissue conformation, ignore anisotropy, or are not able to be performed in fluid media. The aim of this study was to investigate biomechanical properties of swine esophageal tissues through nondestructive testing utilizing sonometry ex vivo. This method allows for biomechanical determination of tissue properties, particularly longitudinal and circumferential moduli and strain energy functions. The relative contribution of mucosal-submucosal layers and muscular layers are compared to composite esophagi. Swine thoracic esophageal tissues (n  =  15) were tested by pressure loading using a continuous pressure pump system to generate stress. Preconditioning of tissue was performed by pressure loading with the pump system and pre-straining the tissue to in vivo length before data was recorded. Sonometry using piezocrystals was utilized to determine longitudinal and circumferential strain on five composite esophagi. Similarly, five mucosa-submucosal and five muscular layers from thoracic esophagi were tested independently. This work on esophageal tissues is consistent with reported uniaxial and biaxial mechanical testing and reported results using strain energy theory and also provides high resolution displacements, preserves native architectural structure and allows assessment of biomechanical properties in fluid media. This method may be of use to characterize mechanical properties of tissue engineered esophageal

  15. Extracting nanobelt mechanical properties from nanoindentation

    Science.gov (United States)

    Zhang, Yin

    2010-06-01

    A three-spring-in-series model is proposed for the nanobelt (NB) indentation test. Compared with the previous two-spring-in-series model, which considers the bending stiffness of atomic force microscope cantilever and the indenter/NB contact stiffness, this model adds a third spring of the NB/substrate contact stiffness. NB is highly flexural due to its large aspect ratio of length to thickness. The bending and lift-off of NB form a localized contact with substrate, which makes the Oliver-Pharr method [W. C. Oliver and G. M. Pharr, J. Mater. Res. 7, 1564 (1992)] and Sneddon method [I. N. Sneddon, Int. J. Eng. Sci. 3, 47 (1965)] inappropriate for NB indentation test. Because the NB/substrate deformation may have significant impact on the force-indentation depth data obtained in experiment, the two-spring-in-series model can lead to erroneous predictions on the NB mechanical properties. NB in indentation test can be susceptible to the adhesion influence because of its large surface area to volume ratio. NB/substrate contact and adhesion can have direct and significant impact on the interpretation of experimental data. Through the three-spring-in-series model, the influence of NB/substrate contact and adhesion is analyzed and methods of reducing such influence are also suggested.

  16. Obesity-related hypertension: possible pathophysiological mechanisms.

    Science.gov (United States)

    Vaněčková, Ivana; Maletínská, Lenka; Behuliak, Michal; Nagelová, Veronika; Zicha, Josef; Kuneš, Jaroslav

    2014-12-01

    Hypertension is one of the major risk factors of cardiovascular diseases, but despite a century of clinical and basic research, the discrete etiology of this disease is still not fully understood. The same is true for obesity, which is recognized as a major global epidemic health problem nowadays. Obesity is associated with an increasing prevalence of the metabolic syndrome, a cluster of risk factors including hypertension, abdominal obesity, dyslipidemia, and hyperglycemia. Epidemiological studies have shown that excess weight gain predicts future development of hypertension, and the relationship between BMI and blood pressure (BP) appears to be almost linear in different populations. There is no doubt that obesity-related hypertension is a multifactorial and polygenic trait, and multiple potential pathogenetic mechanisms probably contribute to the development of higher BP in obese humans. These include hyperinsulinemia, activation of the renin-angiotensin-aldosterone system, sympathetic nervous system stimulation, abnormal levels of certain adipokines such as leptin, or cytokines acting at the vascular endothelial level. Moreover, some genetic and epigenetic mechanisms are also in play. Although the full manifestation of both hypertension and obesity occurs predominantly in adulthood, their roots can be traced back to early ontogeny. The detailed knowledge of alterations occurring in the organism of experimental animals during particular critical periods (developmental windows) could help to solve this phenomenon in humans and might facilitate the age-specific prevention of human obesity-related hypertension. In addition, better understanding of particular pathophysiological mechanisms might be useful in so-called personalized medicine.

  17. Mechanical properties of self-compacting concrete state-of-the-art report of the RILEM technical committee 228-MPS on mechanical properties of self-compacting concrete

    CERN Document Server

    Schutter, Geert

    2014-01-01

    The State-of-the-Art Report of RILEM Technical Committee 228-MPS on Mechanical properties of Self-Compacting Concrete (SCC) summarizes an extensive body of information related to mechanical properties and mechanical behaviour of SCC. Due attention is given to the fact that the composition of SCC varies significantly. A wide range of  mechanical properties are considered, including compressive strength, stress-strain relationship, tensile and flexural strengths, modulus of elasticity, shear strength, effect of elevated temperature, such as fire spalling and residual properties after fire, in-situ properties, creep, shrinkage, bond properties, and structural behaviour. A chapter on fibre-reinforced SCC is included, as well as a chapter on specialty SCC, such as light-weight SCC, heavy-weight SCC, preplaced aggregate SCC, special fibre reinforced SCC, and underwater concrete.

  18. Mechanics of advanced materials analysis of properties and performance

    CERN Document Server

    Matveenko, Valery

    2015-01-01

    The last decades have seen a large extension of types of materials employed in various applications. In many cases these materials demonstrate mechanical properties and performance that vary significantly from those of their traditional counterparts. Such uniqueness is sought – or even specially manufactured – to meet increased requirements on modern components and structures related to their specific use. As a result, mechanical behaviors of these materials under different loading and environmental conditions are outside the boundaries of traditional mechanics of materials, presupposing development of new characterization techniques, theoretical descriptions and numerical tools. The book presents interesting examples of recent developments in this area. Among the studied materials are bulk metallic glasses, metamaterials, special composites, piezoelectric smart structures, nonwovens, etc.

  19. Composition, structure and mechanical properties of several natural cellular materials

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The stem piths of sunflower, kaoliang and corn are natural cellular materials. In this paper, the contents of the compositions of these piths are determined and their cell shapes and structures are examined through scanning electron microscope (SEM) and optical microscope. Further research is conducted in the effects of the compositions and structures of the piths on the mechanical properties after testing the partial mechanical properties. The results show that the total cellulose, hemicelluloses and lignin content of each sample approaches 75% of the dry mass of its primary cell walls. With the fall of R value, a parameter relative to the contents of the main compositions, the flexibilities of the cellular piths descend while their stresses and rigidities increase. The basic cell shape making up the sunflower pith is approximately a tetrakaidehedron. The stem piths of kaoliang and corn are made up of cells close to hexangular prisms and a few tubular ones which can observably reinforce their mechanical properties in the axial directions.

  20. Epoxy Resin Based Composites, Mechanical and Tribological Properties: A Review

    Directory of Open Access Journals (Sweden)

    S.A. Bello

    2015-12-01

    Full Text Available High fuel consumption by automobile and aerospace vehicles built from legacy alloys has been a great challenge to global design and material engineers. This has called for researches into material development for the production of lighter materials of the same or even superior mechanical properties to the existing materials in this area of applications. This forms a part of efforts to achieve the global vision 2025 i.e to reduce the fuel consumption by automobile and aerospace vehicles by at least 75 %. Many researchers have identified advanced composites as suitable materials in this regard. Among the common matrices used for the development of advanced composites, epoxy resin has attained a dominance among its counterparts because of its excellent properties including chemical, thermal and electrical resistance properties, mechanical properties and dimensional stability. This review is a reflection of the extensive study on the currently ongoing research aimed at development of epoxy resin hybrid nanocomposites for engineering applications. In this paper, brief explanation has been given to different terms related to the research work and also, some previous works (in accordance with materials within authors’ reach in the area of the ongoing research have been reported.

  1. Unification of General Relativity and Quantum Mechanics

    CERN Document Server

    Widmer, H

    2005-01-01

    Physics cannot determine what mass is; it can only normalize it - by a given volume: one liter of water corresponds to one kilogram, and so does everything else that shows the same inertia or weight - whatever mass itself was. In the same manner physics is not able to explain inertia or gravity, or to specify the reasons for a constant speed of light, a fundament of special relativity, or the Einstein-De Broglie relations, the basis of quantum mechanics. Even its very core, the Schroedinger Equation, is introduced into the world of physics as a good guess. Would we picture the universe itself as a continuum in space-time all these questions are solved automatically.

  2. Structure and mechanical properties of austenitic steel after cold rolling

    Directory of Open Access Journals (Sweden)

    A. Kurc-Lisiecka

    2011-02-01

    Full Text Available Purpose: The aim of the paper is to determine the influence of the cold plastic deformation within the range 18-79% and heat treatment in a temperature range of 500 to 700°C on the microstructure and mechanical properties of austenitic stainless steel grade X5CrNi18-8.Design/methodology/approach: The investigations included observations of the microstructure on a light microscope, researches of mechanical properties in a static tensile test and hardness measurements made by Vickers’s method. The analysis of the phase composition was carried out on the basis of X-ray researches. Whereas, X-ray quantitative phase analysis was carried out by the Averbach Cohen method.Findings: Heat treatment of X5CrNi18-8 stainless steel in the range 500-700°C causes a significant decrease of the mechanical properties (Rm, Rp0.2 and increase of elongation (A. Hardness of investigated steel drops with decrease of cold working degree and increase of heat treatment temperature.Research limitations/implications: The analysis of the obtained results permits to state that the heat treatment causes an essential changes of the microstructure connected with fading of cold deformation. Heating of cold rolled austenitic stainless steels can cause a reverse transformation α’ → γ.Practical implications: Two-phase structure α’+γ of austenitic Cr-Ni steel in deformed state working at elevated temperature undergo a transformation. It significantly influences mechanical properties of steel. Austenite phase undergoes a recrystallization, while martensite α’ phase undergoes reverse transformation.Originality/value: The analytic dependence of the yield point of the investigated steel on the cold working degree in cold rolling process has been confirmed. Revealing this relation is of essential practical importance for the technology of sheetmetal forming of austenitic steel.

  3. Preon models, relativity, quantum mechanics and cosmology (I)

    CERN Document Server

    Gonzalez-Mestres, Luis

    2009-01-01

    Preons are hypothetic constituents of the standard particles. They were initially assumed to have basically similar properties to those of conventional matter. But this is not necessarily the case: the ultimate constituents of matter may feel a different space-time from that of special relativity and exhibit mechanical properties different from those predicted by standard quantum mechanics. They can also play an important cosmological role (inflation, dark matter, dark energy...). It is even not obvious that energy and momentum would have to be conserved in such a scenario. In this series of papers, we review the subject using the superbradyon model as an example, and suggest new ways to explore possible tests of the preon hypothesis.

  4. Relational mechanics as a gauge theory

    Science.gov (United States)

    Ferraro, Rafael

    2016-02-01

    Absolute space is eliminated from the body of mechanics by gauging translations and rotations in the Lagrangian of a classical system. The procedure implies the addition of compensating terms to the kinetic energy, in such a way that the resulting equations of motion are valid in any frame. The compensating terms provide inertial forces depending on the total momentum P, intrinsic angular momentum J and intrinsic inertia tensor I. Therefore, the privileged frames where Newton's equations are valid ( Newtonian frames) are completely determined by the matter distribution of the universe ( Machianization). At the Hamiltonian level, the gauge invariance leads to first class constraints that remove those degrees of freedom that make no sense once the absolute space has been eliminated. This reformulation of classical mechanics is entirely relational, since it is a dynamics for the distances between particles. It is also Machian, since the rotation of the rest of the universe produces centrifugal effects. It then provides a new perspective to consider the foundational ideas of general relativity, like Mach's principle and the weak equivalence principle. With regard to the concept of time, the absence of an absolute time is known to be a characteristic of parametrized systems. Furthermore, the scale invariance of those parametrized systems whose potentials are inversely proportional to the squared distances can be also gauged by introducing another compensating term associated with the intrinsic virial G ( shape-dynamics).

  5. Real-time observations of mechanical stimulus-induced enhancements of mechanical properties in osteoblast cells

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Xu; Liu Xiaoli; Sun Jialun [State Key Laboratory of Bioactive Materials, School of Physics, Nankai University, Tianjin 300073 (China); He Shuojie [State Key Laboratory of Bioactive Materials, School of Physics, Nankai University, Tianjin 300073 (China); Department of Physics, Pusan National University, Pusan (Korea, Republic of); Lee, Imshik [State Key Laboratory of Bioactive Materials, School of Physics, Nankai University, Tianjin 300073 (China)], E-mail: ilee@nankai.edu.cn2; Pak, Hyuk Kyu [Department of Physics, Pusan National University, Pusan (Korea, Republic of)

    2008-09-15

    Osteoblast, playing a key role in the pathophysiology of osteoporosis, is one of the mechanical stress sensitive cells. The effects of mechanical load-induced changes of mechanical properties in osteoblast cells were studied at real-time. Osteoblasts obtained from young Wister rats were exposed to mechanical loads in different frequencies and resting intervals generated by atomic force microscopy (AFM) probe tip and simultaneously measured the changes of the mechanical properties by AFM. The enhancement of the mechanical properties was observed and quantified by the increment of the apparent Young's modulus, E{sup *}. The observed mechanical property depended on the frequency of applied tapping loads. For the resting interval is 50 s, the mechanical load-induced enhancement of E{sup *}-values disappears. It seems that the enhanced mechanical property was recover able under no additional mechanical stimulus.

  6. Length-dependent mechanical properties of gold nanowires.

    Science.gov (United States)

    Han, Jing; Fang, Liang; Sun, Jiapeng; Han, Ying; Sun, Kun

    2012-12-01

    The well-known "size effect" is not only related to the diameter but also to the length of the small volume materials. It is unfortunate that the length effect on the mechanical behavior of nanowires is rarely explored in contrast to the intensive studies of the diameter effect. The present paper pays attention to the length-dependent mechanical properties of 〈111〉-oriented single crystal gold nanowires employing the large-scale molecular dynamics simulation. It is discovered that the ultrashort Au nanowires exhibit a new deformation and failure regime-high elongation and high strength. The constrained dislocation nucleation and transient dislocation slipping are observed as the dominant mechanism for such unique combination of high strength and high elongation. A mechanical model based on image force theory is developed to provide an insight to dislocation nucleation and capture the yield strength and nucleation site of first partial dislocation indicated by simulation results. Increasing the length of the nanowires, the ductile-to-brittle transition is confirmed. And the new explanation is suggested in the predict model of this transition. Inspired by the superior properties, a new approach to strengthen and toughen nanowires-hard/soft/hard sandwich structured nanowires is suggested. A preliminary evidence from the molecular dynamics simulation corroborates the present opinion.

  7. Mechanical Properties of Oil Palm Empty Fruit Bunch Fiber

    Science.gov (United States)

    Gunawan, Fergyanto E.; Homma, Hiroomi; Brodjonegoro, Satryo S.; Hudin, Afzer Bin Baseri; Zainuddin, Aryanti Binti

    In tropical countries such as Indonesia and Malaysia, the empty fruit bunches are wastes of the oil palm industry. The wastes are abundantly available and has reached a level that severely threats the environment. Therefore, it is a great need to find useful applications of those waste materials; but firstly, the mechanical properties of the EFB fiber should be quantified. In this work, a small tensile test machine is manufactured, and the tensile test is performed on the EFB fibers. The results show that the strength of the EFB fiber is strongly affected by the fiber diameter; however, the fiber strength is relatively low in comparison to other natural fibers.

  8. Mechanical properties of timber from wind damaged Norway spruce

    DEFF Research Database (Denmark)

    Hoffmeyer, Preben

    2003-01-01

    A storm may subject a tree to such bending stresses that extensive compression damage develops in the lee side. The tree may survive the wind load or it may be thrown. However, the damage is inherent and it may be of a magnitude to influence the mechanical properties of boards sawn from the stem...... taken to bending failure and the relations between compression damage and bending strength and stiffness were established. The results showed that significant reductions of bending strength of dry timber are only caused by such wind induced compression damages that are easily recognised at a planed...

  9. Mechanical properties of non-woven glass fiber geopolymer composites

    Science.gov (United States)

    Rieger, D.; Kadlec, J.; Pola, M.; Kovářík, T.; Franče, P.

    2017-02-01

    This experimental research focuses on mechanical properties of non-woven glass fabric composites bound by geopolymeric matrix. This study investigates the effect of different matrix composition and amount of granular filler on the mechanical properties of final composites. Matrix was selected as a metakaolin based geopolymer hardened by different amount of potassium silicate activator. The ceramic granular filler was added into the matrix for investigation of its impact on mechanical properties and workability. Prepared pastes were incorporated into the non-woven fabrics by hand roller and final composites were stacked layer by layer to final thickness. The early age hardening of prepared pastes were monitored by small amplitude dynamic rheology approach and after 28 days of hardening the mechanical properties were examined. The electron microscopy was used for detail description of microstructural properties. The imaging methods revealed good wettability of glass fibers by geopolymeric matrix and results of mechanical properties indicate usability of these materials for constructional applications.

  10. Experimental Analysis of Tensile Mechanical Properties of Sprayed FRP

    Directory of Open Access Journals (Sweden)

    Zhao Yang

    2016-01-01

    Full Text Available To study the tensile mechanical properties of sprayed FRP, 13 groups of specimens were tested through uniaxial tensile experiments, being analyzed about stress-strain curve, tensile strength, elastic modulus, breaking elongation, and other mechanical properties. Influencing factors on tensile mechanical properties of sprayed FRP such as fiber type, resin type, fiber volume ratio, fiber length, and composite thickness were studied in the paper too. The results show that both fiber type and resin type have an obvious influence on tensile mechanical properties of sprayed FRP. There will be a specific fiber volume ratio for sprayed FRP to obtain the best tensile mechanical property. The increase of fiber length can lead to better tensile performance, while that of composite thickness results in property degradation. The study can provide reference to popularization and application of sprayed FRP material used in structure reinforcement.

  11. Reciprocal relativity of noninertial frames: quantum mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Low, Stephen G [4301 Avenue D, Austin, Texas, 78751 (United States)

    2007-04-06

    Noninertial transformations on time-position-momentum-energy space {l_brace}t, q, p, e{r_brace} with invariant Born-Green metric ds{sup 2} = -dt{sup 2} + 1/c{sup 2} dq{sup 2} + 1/b{sup 2} (dp{sup 2} = 1/c{sup 2} de{sup 2}) and the symplectic metric -de and dt + dp and dq are studied. This U 1,3) group of transformations contains the Lorentz group as the inertial special case and, in the limit of small forces and velocities, reduces to the expected Hamilton transformations leaving invariant the symplectic metric and the nonrelativistic line element ds{sup 2} -dt{sup 2}. The U(1,3) transformations bound relative velocities by c and relative forces by b. Spacetime is no longer an invariant subspace but is relative to noninertial observer frames. In the limit of b {yields} {infinity}, spacetime is invariant. Born was lead to the metric by a concept of reciprocity between position and momentum degrees of freedom and for this reason we call this reciprocal relativity. For large b, such effects will almost certainly only manifest in a quantum regime. Wigner showed that special relativistic quantum mechanics follows from the projective representations of the inhomogeneous Lorentz group. Projective representations of a Lie group are equivalent to the unitary representations of its central extension. The same method of projective representations for the inhomogeneous U(1,3) group is used to define the quantum theory in the noninertial case. The central extension of the inhomogeneous U(1,3) group is the cover of the quaplectic group Q(1,3) U(1,3) x{sub s} H(4), H(4) is the Weyl-Heisenberg group. The H(4) group, and the associated Heisenberg commutation relations central to quantum mechanics, results directly from requiring projective representations. A set of second-order wave equations result from the representations of the Casimir operators.

  12. Thermodynamics and statistical mechanics. [thermodynamic properties of gases

    Science.gov (United States)

    1976-01-01

    The basic thermodynamic properties of gases are reviewed and the relations between them are derived from the first and second laws. The elements of statistical mechanics are then formulated and the partition function is derived. The classical form of the partition function is used to obtain the Maxwell-Boltzmann distribution of kinetic energies in the gas phase and the equipartition of energy theorem is given in its most general form. The thermodynamic properties are all derived as functions of the partition function. Quantum statistics are reviewed briefly and the differences between the Boltzmann distribution function for classical particles and the Fermi-Dirac and Bose-Einstein distributions for quantum particles are discussed.

  13. A review of mechanical and electromechanical properties of piezoelectric nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Espinosa, Horacio D.; Bernal, Rodrigo A.; Minary-Jolandan, Majid [Department of Mechanical Engineering, Northwestern University, Evanston, IL (United States)

    2012-09-04

    Piezoelectric nanowires are promising building blocks in nanoelectronic, sensing, actuation and nanogenerator systems. In spite of great progress in synthesis methods, quantitative mechanical and electromechanical characterization of these nanostructures is still limited. In this article, the state-of-the art in experimental and computational studies of mechanical and electromechanical properties of piezoelectric nanowires is reviewed with an emphasis on size effects. The review covers existing characterization and analysis methods and summarizes data reported in the literature. It also provides an assessment of research needs and opportunities. Throughout the discussion, the importance of coupling experimental and computational studies is highlighted. This is crucial for obtaining unambiguous size effects of nanowire properties, which truly reflect the effect of scaling rather than a particular synthesis route. We show that such a combined approach is critical to establish synthesis-structure-property relations that will pave the way for optimal usage of piezoelectric nanowires. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  14. Determination of Mechanical Properties of Microcapsules

    NARCIS (Netherlands)

    Sagis, L.M.C.

    2015-01-01

    Mechanical characterization methods can be important tools in optimizing the design of an encapsulation system. Food microcapsules can be subjected to considerable shear and extensional forces during their life cycle, and the shell of the capsules needs to be designed with sufficient mechanical stre

  15. Mechanical properties of tannin-based rigid foams undergoing compression

    Energy Technology Data Exchange (ETDEWEB)

    Celzard, A., E-mail: Alain.Celzard@enstib.uhp-nancy.fr [Institut Jean Lamour - UMR CNRS 7198, CNRS - Nancy-Universite - UPV-Metz, Departement Chimie et Physique des Solides et des Surfaces, ENSTIB, 27 rue du Merle Blanc, BP 1041, 88051 Epinal cedex 9 (France); Zhao, W. [Institut Jean Lamour - UMR CNRS 7198, CNRS - Nancy-Universite - UPV-Metz, Departement Chimie et Physique des Solides et des Surfaces, ENSTIB, 27 rue du Merle Blanc, BP 1041, 88051 Epinal cedex 9 (France); Pizzi, A. [ENSTIB-LERMAB, Nancy-University, 27 rue du Merle Blanc, BP 1041, 88051 Epinal cedex 9 (France); Fierro, V. [Institut Jean Lamour - UMR CNRS 7198, CNRS - Nancy-Universite - UPV-Metz, Departement Chimie et Physique des Solides et des Surfaces, ENSTIB, 27 rue du Merle Blanc, BP 1041, 88051 Epinal cedex 9 (France)

    2010-06-25

    The mechanical properties of a new class of extremely lightweight tannin-based materials, namely organic foams and their carbonaceous counterparts are detailed. Scaling laws are shown to describe correctly the observed behaviour. Information about the mechanical characteristics of the elementary forces acting within these solids is derived. It is suggested that organic materials present a rather bending-dominated behaviour and are partly plastic. On the contrary, carbon foams obtained by pyrolysis of the former present a fracture-dominated behaviour and are purely brittle. These conclusions are supported by the differences in the exponent describing the change of Young's modulus as a function of relative density, while that describing compressive strength is unchanged. Features of the densification strain also support such conclusions. Carbon foams of very low density may absorb high energy when compressed, making them valuable materials for crash protection.

  16. Laser welding of polymers, compatibility and mechanical properties

    DEFF Research Database (Denmark)

    Nielsen, Steen Erik; Strange, Marianne; Kristensen, Jens Klæstrup

    2013-01-01

    with the development of related absorbers added to the polymer materials provide the possibility of joining transparent and non-transparent materials. The automotive industry, the medical device industry and the electronic industry are just some of the areas where the technology is widely implemented......Laser welding of polymers is today a commonly used industrial technology. It has shown obvious advantages compared to e.g. adhesive bonding in terms of higher productivity, better quality and easiness for automation. The ongoing development of lasers tailored for polymer welding in coordination....... There is an increasing industrial interest in joining dissimilar polymers. To overcome the challenges involved increased focus is set on the understanding of joining mechanisms, morphology and molecular structure behavior. Also the understanding of resulting mechanical and thermal properties is presently subject...

  17. Mechanical properties of UV irradiated rat tail tendon (RTT) collagen.

    Science.gov (United States)

    Sionkowska, Alina; Wess, Tim

    2004-04-01

    The mechanical properties of RTT collagen tendon before and after UV irradiation have been investigated by mechanical testing (Instron). Air-dried tendon were submitted to treatment with UV irradiation (wavelength 254 nm) for different time intervals. The changes in such mechanical properties as breaking strength and percentage elongation have been investigated. The results have shown, that the mechanical properties of the tendon were greatly affected by time of UV irradiation. Ultimate tensile strength and ultimate percentage elongation decreased after UV irradiation of the tendon. Increasing UV irradiation leads to a decrease in Young's modulus of the tendon.

  18. Mechanical Properties of Degraded PMR-15 Resin

    Science.gov (United States)

    Tsuji, Luis C.

    2000-01-01

    Thermo-oxidative aging produces a nonuniform degradation state in PMR-15 resin. A surface layer, usually attributed to oxidative degradation, forms. This surface layer has different properties from the inner material. A set of material tests was designed to separate the properties of the oxidized surface layer from the properties of interior material. Test specimens were aged at 316 C in either air or nitrogen, for durations of up to 800 hr. The thickness of the oxidized surface layer in air aged specimens, and the shrinkage and coefficient of thermal expansion (CTE) of nitrogen aged specimens were measured directly. The nitrogen-aged specimens were assumed to have the same properties as the interior material in the air-aged specimens. Four-point-bend tests were performed to determine modulus of both the oxidized surface layer and the interior material. Bimaterial strip specimens consisting of oxidized surface material and unoxidized interior material were constructed and used to determine surface layer shrinkage and CTE. Results confirm that the surface layer and core materials have substantially different properties.

  19. Phonon spectrum, mechanical and thermophysical properties of thorium carbide

    Energy Technology Data Exchange (ETDEWEB)

    Pérez Daroca, D., E-mail: pdaroca@tandar.cnea.gov.ar [Gerencia de Investigación y Aplicaciones, Comisión Nacional de Energía Atómica (Argentina); Consejo Nacional de Investigaciones Cientı´ficas y Técnicas (Argentina); Jaroszewicz, S. [Gerencia de Investigación y Aplicaciones, Comisión Nacional de Energía Atómica (Argentina); Instituto de Tecnología Jorge A. Sabato, UNSAM-CNEA (Argentina); Llois, A.M. [Gerencia de Investigación y Aplicaciones, Comisión Nacional de Energía Atómica (Argentina); Consejo Nacional de Investigaciones Cientı´ficas y Técnicas (Argentina); Mosca, H.O. [Gerencia de Investigación y Aplicaciones, Comisión Nacional de Energía Atómica (Argentina); Instituto de Tecnología Jorge A. Sabato, UNSAM-CNEA (Argentina)

    2013-06-15

    In this work, we study, by means of density functional perturbation theory and the pseudopotential method, mechanical and thermophysical properties of thorium carbide. These properties are derived from the lattice dynamics in the quasi-harmonic approximation. The phonon spectrum of ThC presented in this article, to the best authors’ knowledge, have not been studied, neither experimentally, nor theoretically. We compare mechanical properties, volume thermal expansion and molar specific capacities with previous results and find a very good agreement.

  20. Compressive and tensile mechanical properties of the porcine nasal septum.

    Science.gov (United States)

    Al Dayeh, Ayman A; Herring, Susan W

    2014-01-03

    The expanding nasal septal cartilage is believed to create a force that powers midfacial growth. In addition, the nasal septum is postulated to act as a mechanical strut that prevents the structural collapse of the face under masticatory loads. Both roles imply that the septum is subject to complex biomechanical loads during growth and mastication. The purpose of this study was to measure the mechanical properties of the nasal septum to determine (1) whether the cartilage is mechanically capable of playing an active role in midfacial growth and in maintaining facial structural integrity and (2) if regional variation in mechanical properties is present that could support any of the postulated loading regimens. Porcine septal samples were loaded along the horizontal or vertical axes in compression and tension, using different loading rates that approximate the in vivo situation. Samples were loaded in random order to predefined strain points (2-10%) and strain was held for 30 or 120 seconds while relaxation stress was measured. Subsequently, samples were loaded until failure. Stiffness, relaxation stress and ultimate stress and strain were recorded. Results showed that the septum was stiffer, stronger and displayed a greater drop in relaxation stress in compression compared to tension. Under compression, the septum displayed non-linear behavior with greater stiffness and stress relaxation under faster loading rates and higher strain levels. Under tension, stiffness was not affected by strain level. Although regional variation was present, it did not strongly support any of the suggested loading patterns. Overall, results suggest that the septum might be mechanically capable of playing an active role in midfacial growth as evidenced by increased compressive residual stress with decreased loading rates. However, the low stiffness of the septum compared to surrounding bone does not support a strut role. The relatively low stiffness combined with high stress relaxation

  1. Study of UV fiber's mechanical properties

    Institute of Scientific and Technical Information of China (English)

    Feng TU; Xinwei QIAN; Deming LIU; Shuqiang ZHANG; Jie LUO; Tao DENG; Chen YANG; Jiangtao GUO

    2009-01-01

    A number of spectroscopic techniques make use of ultra violet (UV) absorbance and luminescence measurements to characterize materials, for use in medical/pharmaceutical applications, for forensic and sensor applications, and for remote detection or monitoring,especially for hazardous environments.Furthermore, many high-power applications in medicine and industry are looking forward to using UV wavelengths.The UV fiber's mechanical reliability has become one of the most crucial performances with longer length fiber being used.This paper reviews the researched evolvement of the normal single mode fiber's mechanical reliability.Based on the standard measure method of the normal fiber, the mechanical reliability of the UV fiber has been researched.The measurement results show the difference of mechanical reliability between the different doping composition UV fibers.

  2. Heritability of lumbar trabecular bone mechanical properties in baboons.

    Science.gov (United States)

    Havill, L M; Allen, M R; Bredbenner, T L; Burr, D B; Nicolella, D P; Turner, C H; Warren, D M; Mahaney, M C

    2010-03-01

    Genetic effects on mechanical properties have been demonstrated in rodents, but not confirmed in primates. Our aim was to quantify the proportion of variation in vertebral trabecular bone mechanical properties that is due to the effects of genes. L3 vertebrae were collected from 110 females and 46 male baboons (6-32 years old) from a single extended pedigree. Cranio-caudally oriented trabecular bone cores were scanned with microCT then tested in monotonic compression to determine apparent ultimate stress, modulus, and toughness. Age and sex effects and heritability (h(2)) were assessed using maximum likelihood-based variance components methods. Additive effects of genes on residual trait variance were significant for ultimate stress (h(2)=0.58), toughness (h(2)=0.64), and BV/TV (h(2)=0.55). When BV/TV was accounted for, the residual variance in ultimate stress accounted for by the additive effects of genes was no longer significant. Toughness, however, showed evidence of a non-BV/TV-related genetic effect. Overall, maximum stress and modulus show strong genetic effects that are nearly entirely due to bone volume. Toughness shows strong genetic effects related to bone volume and shows additional genetic effects (accounting for 10% of the total trait variance) that are independent of bone volume. These results support continued use of bone volume as a focal trait to identify genes related to skeletal fragility, but also show that other focal traits related to toughness and variation in the organic component of bone matrix will enhance our ability to find additional genes that are particularly relevant to fatigue-related fractures.

  3. Improvement of mechanical properties of steel sheet

    Institute of Scientific and Technical Information of China (English)

    Bashchenko; A.; P.; Knokhin; V.; G.; Beliavsky; P.; B.; Traino; A.; I.

    2005-01-01

    Consideration was given to some peculiarities of the resource-saving IDT-production that implements metallophysical principles of hot deformation effect upon the formation of martensite and perlite structures of alloy steels as well as upon their functional properties by way of DTT-cycling.

  4. Mechanical properties of short carbon/glass fiber reinforced high mechanical performance epoxy resins

    Institute of Scientific and Technical Information of China (English)

    张竞; 黄培

    2009-01-01

    To research the relationship between epoxy and fiber inherent property and mechanical properties of composite,we prepared a series of composites using three kinds of high mechanical performance epoxy resins as matrices and reinforced by the same volume fraction(5%)of short carbon and glass fiber.Their mechanical properties were investigated from the perspective of chemical structure and volume shrinkage ratio of epoxy.We analyzed their tensile strength and modulus based on the mixing rule and Halpin-Tsai eq...

  5. Mechanical Properties of Four Human Longbones.

    Science.gov (United States)

    1981-11-30

    Ultimate Properties of Compact Bone Tissue," J. Biomechanics, 1975, pp. 393-405. 41. Bass, William M., Human Osteology: A Laboratory and Field Manual of...bone’s proximal and distal epiphyses. Most of the measurements used can be found in the antropological literature [1, 2, 4, 5, 61. Those that cannot...using strain sensing load cells connected to j a manual switch and balance unit and digital display. The torque applied was inferred by the tensile

  6. On mechanical properties of planar flexure hinges of compliant mechanisms

    Directory of Open Access Journals (Sweden)

    F. Dirksen

    2011-06-01

    Full Text Available The synthesis of compliant mechanisms yield optimized topologies that combine several stiff parts with highly elastic flexure hinges. The hinges are often represented in finite element analysis by a single node (one-node hinge leaving doubts on the physical meaning as well as an uncertainty in the manufacturing process.

    To overcome this one-node hinge problem of optimized compliant mechanisms' topologies, one-node hinges need to be replaced by real flexure hinges providing desired deflection range and the ability to bear internal loads without failure. Therefore, several common types of planar flexure hinges with different geometries are characterized and categorized in this work providing a comprehensive guide with explicit analytical expressions to replace one-node hinges effectively.

    Analytical expressions on displacements, stresses, maximum elastic deformations, bending stiffness, center of rotation and first natural frequencies are derived in this work. Numerical simulations and experimental studies are performed validating the analytical results. More importance is given to practice-oriented flexure hinge types in terms of cost-saving manufacturability, i.e. circular notch type hinges and rectangular leaf type hinges.

  7. Towards the feasibility of using ultrasound to determine mechanical properties of tissues in a bioreactor

    Science.gov (United States)

    Mansour, Joseph M.; Gu, Di-Win Marine; Chung, Chen-Yuan; Heebner, Joseph; Althans, Jake; Abdalian, Sarah; Schluchter, Mark D.; Liu, Yiying; Welter, Jean F.

    2016-01-01

    Introduction Our ultimate goal is to non-destructively evaluate mechanical properties of tissue-engineered (TE) cartilage using ultrasound (US). We used agarose gels as surrogates for TE cartilage. Previously, we showed that mechanical properties measured using conventional methods were related to those measured using US, which suggested a way to non-destructively predict mechanical properties of samples with known volume fractions. In this study, we sought to determine whether the mechanical properties of samples, with unknown volume fractions could be predicted by US. Methods Aggregate moduli were calculated for hydrogels as a function of SOS, based on concentration and density using a poroelastic model. The data were used to train a statistical model, which we then used to predict volume fractions and mechanical properties of unknown samples. Young's and storage moduli were measured mechanically. Results The statistical model generally predicted the Young's moduli in compression to within mechanically measured value. We defined positive linear correlations between the aggregate modulus predicted from US and both the storage and Young's moduli determined from mechanical tests. Conclusions Mechanical properties of hydrogels with unknown volume fractions can be predicted successfully from US measurements. This method has the potential to predict mechanical properties of TE cartilage non-destructively in a bioreactor. PMID:25092421

  8. Mechanical Properties of Layered Hybrid Fiber Reinforced Concrete

    Institute of Scientific and Technical Information of China (English)

    YUAN Hai-qing; CHEN Jing-tao; ZHU Ji-dong

    2003-01-01

    To improve the mechanical properties of concrete,Layered Hybrid Fiber Reinforced Concrete (LHFRC) was developed in this paper.Through comparative tests,the effects of layered hybrid fibers on a series of mechanical properties of concrete were discussed.The mechanical properties include compressive strength,tensile strength,flexural strength,compressive stress-strain relationship,flexural toughness and cracking resistance of concrete.The testing results and analysis demonstrate that layered hybrid fibers can significantly improve the flexural strength,toughness and cracking resistance of concrete while the cost of concrete increases slightly.

  9. Mechanical and microwave absorbing properties of carbon-filled polyurethane.

    Science.gov (United States)

    Kucerová, Z; Zajícková, L; Bursíková, V; Kudrle, V; Eliás, M; Jasek, O; Synek, P; Matejková, J; Bursík, J

    2009-01-01

    Polyurethane (PU) matrix composites were prepared with various carbon fillers at different filler contents in order to investigate their structure, mechanical and microwave absorbing properties. As fillers, flat carbon microparticles, carbon microfibers and multiwalled carbon nanotubes (MWNT) were used. The microstructure of the composite was examined by scanning electron microscopy and transmission electron microscopy. Mechanical properties, namely universal hardness, plastic hardness, elastic modulus and creep were assessed by means of depth sensing indentation test. Mechanical properties of PU composite filled with different fillers were investigated and the composite always exhibited higher hardness, elastic modulus and creep resistance than un-filled PU. Influence of filler shape, content and dispersion was also investigated.

  10. Dependence of Glass Mechanical Properties on Thermal and Pressure History

    DEFF Research Database (Denmark)

    Smedskjær, Morten Mattrup; Bauchy, Mathieu

    -equilibrium material, the structure and properties of glass depend not only on its composition, but also on its thermal and pressure histories. Here we review our recent findings regarding the thermal and pressure history dependence of indentation-derived mechanical properties of oxide glasses.......Predicting the properties of new glasses prior to manufacturing is a topic attracting great industrial and scientific interest. Mechanical properties are currently of particular interest given the increasing demand for stronger, thinner, and more flexible glasses in recent years. However, as a non...

  11. IMPROVED PROCESSING FOR MICROSTRUCTURES AND MECHANICAL PROPERTIES OF A COMMERCIAL PIPELINE STEEL

    Institute of Scientific and Technical Information of China (English)

    Y.C. Wang; Y.S. Li; M.C. Zhao; K. Yang

    2005-01-01

    The transformation productions of hot-deformation simulation experiments were investigated us ing a Gleeble-1500 hot simulator for a commercial pipeline steel. Based on the investigation results, the improved thermo-mechanical control processing (TMCP) schedules containing a two stage multi-pass controlled rolling coupled with moderate cooling rates were applied to hot rolling experiments and acicular ferrite dominated microstructure was obtained. Microstructures and mechanical properties of hot rolled plates were related to TMCP processing, and regression equations describing the relation between processing parameters and mechanical properties in the current TMCP were developed, which could be used to predict mechanical properties of the experimental steel during commercially processing. It was found that with an increase in cooling rate after hot rolling, grain size in the microstructure became smaller, the amount of polyg onal ferrite decreased and acicular ferrite increased, and accordingly mechanical properties increased.

  12. The mechanical and strength properties of diamond.

    Science.gov (United States)

    Field, J E

    2012-12-01

    Diamond is an exciting material with many outstanding properties; see, for example Field J E (ed) 1979 The Properties of Diamond (London: Academic) and Field J E (ed) 1992 The Properties of Natural and Synthetic Diamond (London: Academic). It is pre-eminent as a gemstone, an industrial tool and as a material for solid state research. Since natural diamonds grew deep below the Earth's surface before their ejection to mineable levels, they also contain valuable information for geologists. The key to many of diamond's properties is the rigidity of its structure which explains, for example, its exceptional hardness and its high thermal conductivity. Since 1953, it has been possible to grow synthetic diamond. Before then, it was effectively only possible to have natural diamond, with a small number of these found in the vicinity of meteorite impacts. Techniques are now available to grow gem quality synthetic diamonds greater than 1 carat (0.2 g) using high temperatures and pressures (HTHP) similar to those found in nature. However, the costs are high, and the largest commercially available industrial diamonds are about 0.01 carat in weight or about 1 mm in linear dimension. The bulk of synthetic diamonds used industrially are 600 µm or less. Over 75% of diamond used for industrial purposes today is synthetic material. In recent years, there have been two significant developments. The first is the production of composites based on diamond; these materials have a significantly greater toughness than diamond while still maintaining very high hardness and reasonable thermal conductivity. The second is the production at low pressures by metastable growth using chemical vapour deposition techniques. Deposition onto non-diamond substrates was first demonstrated by Spitsyn et al 1981 J. Cryst. Growth 52 219-26 and confirmed by Matsumoto et al 1982 Japan J. Appl. Phys. 21 L183-5. These developments have added further to the versatility of diamond. Two other groups of

  13. Mechanical properties of bimetallic one-dimensional structures

    Science.gov (United States)

    Smelova, Ekaterina M.; Sitnikov, Ivan I.; Zelensky, Vladimir S.; Tsysar, Kseniya M.; Andreev, Valery G.; Vdovin, Vladimir A.; Saletsky, Alexander M.

    2016-12-01

    Mechanical properties of freestanding Au-Mn nanowires and Au-Mn nanowire on a Cu (110) substrate are studied with ab initio theoretical approach. The calculations were carried out using the software package Vienna Ab-initio Simulation Package (VASP), which is based on the density functional theory (DFT). It was shown that the breaking force (0.45nN) as well as the interatomic distance at a breaking point in bimetallic nanowire (3.0 Å) are higher than in one component Au wire (0.4 nN and 2.6Å respectively). Relative elongation of 15 % results in a fracture of bimetallic nanowire. We studied the mechanical response of the nanojunction in a form of three-atomic Au chain aligned vertically between two pyramidal gold electrodes and demonstrated that the breaking of nanocontact depends only the interaction between Au atoms in the chain and dependents slightly on the structure and properties of the atomic structure of the electrodes.

  14. Simultaneous spectrophotometric and mechanical property characterization of skin

    Science.gov (United States)

    Bunegin, Leonid; Moore, Jeffery B.

    2006-02-01

    Both reflectance spectroscopy and the determination Young's Modulus of skin have shown promise for identifying skin pathology. At present, these determinations are carried out using separate methodologies. This study demonstrates a new technology combining digital UV/VIS reflectance spectroscopy and vacuum aspiration for simultaneously determining the reflectance spectrum and mechanical properties of human skin tissue. A small hand held prototype device incorporating fiber-optic light guides into a vacuum channel was calibrated using various elastic materials subjected to increments of stress by vacuum from 0 to 25 in Hg. The intensity of a UV/VIS light beam reflected from the material at each vacuum increment was compared to the resulting material strain. The reflected beam was also spectrophotometrically analyzed. Skin types were similarly evaluated comparing normal and scar tissue and skin of various ages and coloration. An exponential relationship between reflected beam intensity and the amount of strain resulting from vacuum increments was observed. Young's Modulus (calculated from Aoki et. al equation) and spectra from normal skin and scar tissue were in agreement with previously published observations. Age related decreases in skin elasticity were also demonstrated. In the reflectance spectra, oxy and deoxy-hemoglobin absorbance bands were detected, becoming significantly enhanced at increased levels of vacuum. Melanin absorbance was also easily detected and appeared to correlate with skin coloration. Since superficial skin pathologies have characteristic spectroscopic and mechanical properties, this technique may provide a promising new approach for rapid, non-invasive method for the evaluation of skin lesions.

  15. Passive mechanical properties of legs from running insects.

    Science.gov (United States)

    Dudek, Daniel M; Full, Robert J

    2006-04-01

    While the dynamics of running arthropods have been modeled as a spring-mass system, no such structures have been discovered that store and return energy during bouncing. The hindleg of the cockroach Blaberus discoidalis is a good candidate for a passive, vertical leg spring because its vertically oriented joint axes of rotation limit the possibility of active movements and contributions of muscle properties. We oscillated passive legs while measuring force to determine the leg's dynamic, mechanical properties. The relative dimensionless stiffness of an individual cockroach leg was equal to that estimated for a single leg of a biped or quadruped. Leg resilience ranged from 60 to 75%, affording the possibility that the leg could function as a spring to store and return the mechanical energy required to lift and accelerate the center of mass. Because hysteresis was independent of oscillation frequency, we rejected the use of a Voigt model - a simple spring in parallel with a viscous damper. A hysteretic damping model fit the cockroach leg force-displacement data over a wide range of frequencies and displacement using just two parameters. Rather than simply acting as a spring to minimize energy, we hypothesize that legs must manage both energy storage and absorption for rapid running to be most effective.

  16. Mechanical and Electrical Properties of Aluminum/Epoxy Nanocomposites

    Science.gov (United States)

    Dong, Lina; Zhou, Wenying; Sui, Xuezhen; Wang, Zijun; Cai, Huiwu; Wu, Peng; Zhang, Yating; Zhou, Anning

    2016-11-01

    Surface-modified self-passivated aluminum (Al) nanoparticles were used for reinforcing epoxy (EP) resin, and the curing behavior, mechanical and electrical properties of the Al/EP nanocomposites were investigated. The incorporation of Al nanoparticles into EP significantly decreases the cure reaction enthalpy of the nancomposites, and the apparent activation energy of Al/EP systems is 64.96 kJ/mol. The coefficient of thermal expansion of the nanocomposites decreases with increasing the Al loading due to the strong interaction between the Al and the EP matrix. The storage modulus of the nanocomposites increases continuously with Al content, whereas, the glass transition temperature declines slightly. With increasing the Al content, the tensile modulus, flexural modulus and compressive modulus of the nanocomposites increase continuously compared with the neat one. The mechanical properties are improved by Al nanoparticles at low Al contents. The best overall dielectric and electrical performance are achieved about at 1 wt.% of Al concentration. The enhanced dielectric breakdown strength is mainly related to the insulating alumina shell on the surface of core Al and the strong interfacial interactions.

  17. Mechanical Properties of a Calcium Dietary Supplement, Calcium Fumarate Trihydrate.

    Science.gov (United States)

    Sun, Shijing; Henke, Sebastian; Wharmby, Michael T; Yeung, Hamish H-M; Li, Wei; Cheetham, Anthony K

    2015-12-07

    The mechanical properties of calcium fumarate trihydrate, a 1D coordination polymer considered for use as a calcium source for food and beverage enrichment, have been determined via nanoindentation and high-pressure X-ray diffraction with single crystals. The nanoindentation studies reveal that the elastic modulus (16.7-33.4 GPa, depending on crystallographic orientation), hardness (1.05-1.36 GPa), yield stress (0.70-0.90 GPa), and creep behavior (0.8-5.8 nm/s) can be rationalized in view of the anisotropic crystal structure; factors include the directionality of the inorganic Ca-O-Ca chain and hydrogen bonding, as well as the orientation of the fumarate ligands. High-pressure single-crystal X-ray diffraction studies show a bulk modulus of ∼ 20 GPa, which is indicative of elastic recovery intermediate between small molecule drug crystals and inorganic pharmaceutical ingredients. The combined use of nanoindentation and high-pressure X-ray diffraction techniques provides a complementary experimental approach for probing the critical mechanical properties related to tableting of these dietary supplements.

  18. Mechanical Properties of Intermediate Filament Proteins.

    Science.gov (United States)

    Charrier, Elisabeth E; Janmey, Paul A

    2016-01-01

    Purified intermediate filament (IF) proteins can be reassembled in vitro to produce polymers closely resembling those found in cells, and these filaments form viscoelastic gels. The cross-links holding IFs together in the network include specific bonds between polypeptides extending from the filament surface and ionic interactions mediated by divalent cations. IF networks exhibit striking nonlinear elasticity with stiffness, as quantified by shear modulus, increasing an order of magnitude as the networks are deformed to large strains resembling those that soft tissues undergo in vivo. Individual IFs can be stretched to more than two or three times their resting length without breaking. At least 10 different rheometric methods have been used to quantify the viscoelasticity of IF networks over a wide range of timescales and strain magnitudes. The mechanical roles of different classes of cytoplasmic IFs on mesenchymal and epithelial cells in culture have also been studied by an even wider range of microrheological methods. These studies have documented the effects on cell mechanics when IFs are genetically or pharmacologically disrupted or when normal or mutant IF proteins are exogenously expressed in cells. Consistent with in vitro rheology, the mechanical role of IFs is more apparent as cells are subjected to larger and more frequent deformations.

  19. Mechanical properties of alumina porcelain during heating

    Science.gov (United States)

    Šín, Peter; Podoba, Rudolf; ŠtubÅa, Igor; Trník, Anton

    2014-11-01

    The mechanical strength and Young's modulus of green alumina porcelain (50 wt. % of kaolin, 25 wt. % of Al2O3, and 25 wt. % of feldspar) were measured during heating up to 900 °C and 1100 °C, respectively. To this end, we used the three point-bending method and modulated force thermomechanical analysis (mf-TMA). The loss liberation - of the physically bound water (20 - 250 °C) strengthens the sample and Young's modulus increases its values significantly. The dehydroxylation that takes place in the range of 400 - 650 °C causes a slight decrease in Young's modulus. On the other hand, the mechanical strength slightly increases in this temperature range, although it has a sudden drop at 420 °C. Beyond the dehydroxylation range, above 650 °C, both Young's modulus and mechanical strength increase. Above 950 °C, a sharp increase of Young's modulus is caused by the solid-state sintering and the new structure created by the high-temperature reactions in metakaolinite.

  20. Mechanical Properties of Austenitic Stainless Steel Made by Additive Manufacturing.

    Science.gov (United States)

    Luecke, William E; Slotwinski, John A

    2014-01-01

    Using uniaxial tensile and hardness testing, we evaluated the variability and anisotropy of the mechanical properties of an austenitic stainless steel, UNS S17400, manufactured by an additive process, selective laser melting. Like wrought materials, the mechanical properties depend on the orientation introduced by the processing. The recommended stress-relief heat treatment increases the tensile strength, reduces the yield strength, and decreases the extent of the discontinuous yielding. The mechanical properties, assessed by hardness, are very uniform across the build plate, but the stress-relief heat treatment introduced a small non-uniformity that had no correlation to position on the build plate. Analysis of the mechanical property behavior resulted in four conclusions. (1) The within-build and build-to-build tensile properties of the UNS S17400 stainless steel are less repeatable than mature engineering structural alloys, but similar to other structural alloys made by additive manufacturing. (2) The anisotropy of the mechanical properties of the UNS S17400 material of this study is larger than that of mature structural alloys, but is similar to other structural alloys made by additive manufacturing. (3) The tensile mechanical properties of the UNS S17400 material fabricated by selective laser melting are very different from those of wrought, heat-treated 17-4PH stainless steel. (4) The large discontinuous yielding strain in all tests resulted from the formation and propagation of Lüders bands.

  1. Structural Properties and Mechanical Durability of Extruded Fish Feed

    DEFF Research Database (Denmark)

    Haubjerg, Anders Fjeldbo; Veje, Christian; Jørgensen, Bo Nørregaard;

    2015-01-01

    This article investigates the possible correlation between mechanical properties of fish feed pellets and their mechanical durability. Mechanical properties were obtained by texture profile analysis (TPA) and stress relaxation test (SRT) of different types of fish feed. The results were correlated...... against a conventional test of mechanical durability (DORIS, Durability On a Realistic, test). From SRT it was found that for achieving a high durability, pellets should be able to relax an applied force nonelastically. From TPA, it was found that a durable pellet should also be able to return its...

  2. Mechanical Properties of Semiconductors and Their Alloys

    Science.gov (United States)

    1992-02-01

    enough footing to warrant refereed publication. 14 3. FIRST-PRINCIPLES APPROACH TO THE PLASTIC PROPERTIES OF HIGH-TEMPERATURE ALLOYS 3.1 INTRODUCTION With...10.2 9.8 10.274 C" 8.036 8.3 3.5 8.013 drC =(a/4)[l+(l-) 2+P2]’. C11 11.1 11.30 C 0.54 0.51 0.53 0.51 A similar procedure can now be carried out to...In CP structure, the first values dAc and dRc are for those bonds along the (111)direction, and the second values are for those in the other three

  3. Statistical mechanics in the context of special relativity.

    Science.gov (United States)

    Kaniadakis, G

    2002-11-01

    In Ref. [Physica A 296, 405 (2001)], starting from the one parameter deformation of the exponential function exp(kappa)(x)=(sqrt[1+kappa(2)x(2)]+kappax)(1/kappa), a statistical mechanics has been constructed which reduces to the ordinary Boltzmann-Gibbs statistical mechanics as the deformation parameter kappa approaches to zero. The distribution f=exp(kappa)(-beta E+betamu) obtained within this statistical mechanics shows a power law tail and depends on the nonspecified parameter beta, containing all the information about the temperature of the system. On the other hand, the entropic form S(kappa)= integral d(3)p(c(kappa) f(1+kappa)+c(-kappa) f(1-kappa)), which after maximization produces the distribution f and reduces to the standard Boltzmann-Shannon entropy S0 as kappa-->0, contains the coefficient c(kappa) whose expression involves, beside the Boltzmann constant, another nonspecified parameter alpha. In the present effort we show that S(kappa) is the unique existing entropy obtained by a continuous deformation of S0 and preserving unaltered its fundamental properties of concavity, additivity, and extensivity. These properties of S(kappa) permit to determine unequivocally the values of the above mentioned parameters beta and alpha. Subsequently, we explain the origin of the deformation mechanism introduced by kappa and show that this deformation emerges naturally within the Einstein special relativity. Furthermore, we extend the theory in order to treat statistical systems in a time dependent and relativistic context. Then, we show that it is possible to determine in a self consistent scheme within the special relativity the values of the free parameter kappa which results to depend on the light speed c and reduces to zero as c--> infinity recovering in this way the ordinary statistical mechanics and thermodynamics. The statistical mechanics here presented, does not contain free parameters, preserves unaltered the mathematical and epistemological structure of

  4. Thermobimetals Mechanical Properties Produced by Explosive Welding with Rolling

    OpenAIRE

    Gulbin, V.; Kobelev, A.; Borissov, D.

    1997-01-01

    We used explosive welding with rolling to produce thermobimetals on the basis of beryllium bronze and alloys of nickel. It gave us possibility to obtain magnetic and non-magnetic thermobimetals possessing high physical and mechanical properties.

  5. Investigation of Mechanical Properties of Cryogenically Treated Music Wire

    CERN Document Server

    Heptonstall, A; Robertson, N A

    2015-01-01

    It has been reported that treating music wire (high carbon steel wire) by cooling to cryogenic temperatures can enhance its mechanical properties with particular reference to those properties important for musical performance. We use such wire for suspending many of the optics in Advanced LIGO, the upgrade to LIGO - the Laser Interferometric Gravitational-Wave Observatory. Two properties that particularly interest us are mechanical loss and breaking strength. A decrease in mechanical loss would directly reduce the thermal noise associated with the suspension, thus enhancing the noise performance of mirror suspensions within the detector. An increase in strength could allow thinner wire to be safely used, which would enhance the dilution factor of the suspension, again leading to lower suspension thermal noise. In this article we describe the results of an investigation into some of the mechanical properties of music wire, comparing untreated wire with the same wire which has been cryogenically treated. For th...

  6. Primate dietary ecology in the context of food mechanical properties.

    Science.gov (United States)

    Coiner-Collier, Susan; Scott, Robert S; Chalk-Wilayto, Janine; Cheyne, Susan M; Constantino, Paul; Dominy, Nathaniel J; Elgart, Alison A; Glowacka, Halszka; Loyola, Laura C; Ossi-Lupo, Kerry; Raguet-Schofield, Melissa; Talebi, Mauricio G; Sala, Enrico A; Sieradzy, Pawel; Taylor, Andrea B; Vinyard, Christopher J; Wright, Barth W; Yamashita, Nayuta; Lucas, Peter W; Vogel, Erin R

    2016-09-01

    Substantial variation exists in the mechanical properties of foods consumed by primate species. This variation is known to influence food selection and ingestion among non-human primates, yet no large-scale comparative study has examined the relationships between food mechanical properties and feeding strategies. Here, we present comparative data on the Young's modulus and fracture toughness of natural foods in the diets of 31 primate species. We use these data to examine the relationships between food mechanical properties and dietary quality, body mass, and feeding time. We also examine the relationship between food mechanical properties and categorical concepts of diet that are often used to infer food mechanical properties. We found that traditional dietary categories, such as folivory and frugivory, did not faithfully track food mechanical properties. Additionally, our estimate of dietary quality was not significantly correlated with either toughness or Young's modulus. We found a complex relationship among food mechanical properties, body mass, and feeding time, with a potential interaction between median toughness and body mass. The relationship between mean toughness and feeding time is straightforward: feeding time increases as toughness increases. However, when considering median toughness, the relationship with feeding time may depend upon body mass, such that smaller primates increase their feeding time in response to an increase in median dietary toughness, whereas larger primates may feed for shorter periods of time as toughness increases. Our results emphasize the need for additional studies quantifying the mechanical and chemical properties of primate diets so that they may be meaningfully compared to research on feeding behavior and jaw morphology.

  7. Microstructure and mechanical properties of neoprene montmorillonite nanocomposites

    Science.gov (United States)

    Yeh, Meng-Heng; Hwang, Weng-Sing; Cheng, Lin-Ri

    2007-03-01

    To investigate the microstructure and mechanical properties of neoprene-montmorillonite nanocomposite, three modified montmorillonite are used. An X-ray diffractometer is used to measure the corresponding change in d-spacing. Scanning electron microscopy is employed to investigate the morphology of the various composites. Transmission electron microscopy is employed to investigate the composite of montmorillonite and neoprene. The results indicate that the addition of montmorillonite enhances the mechanical properties of neoprene significantly.

  8. Dynamic mechanical properties of an inlay composite.

    Science.gov (United States)

    Dionysopoulos, P; Watts, D C

    1989-06-01

    A visible light-cured composite resin (Brilliant DI) has been studied over a wide range of temperature and frequency by a dynamic mechanical flexural method. The derived data of logarithmic modulus and loss tangent (tan delta) show considerable changes following a secondary-cure process applied to the material. This involved the application of heat and intense light with temperatures rising to 120 degrees C in 7 min. Following this oven-cure the resin phase exhibited enhanced stiffness with the activation-energy barrier for molecular motion at the glass-transition rising from 220 to 291 kJ/mol. This study clarifies the nature and extent of the internal molecular changes which may be produced in the fabrication of a composite inlay.

  9. Measuring the mechanical properties of molecular conformers

    Science.gov (United States)

    Jarvis, S. P.; Taylor, S.; Baran, J. D.; Champness, N. R.; Larsson, J. A.; Moriarty, P.

    2015-09-01

    Scanning probe-actuated single molecule manipulation has proven to be an exceptionally powerful tool for the systematic atomic-scale interrogation of molecular adsorbates. To date, however, the extent to which molecular conformation affects the force required to push or pull a single molecule has not been explored. Here we probe the mechanochemical response of two tetra(4-bromophenyl)porphyrin conformers using non-contact atomic force microscopy where we find a large difference between the lateral forces required for manipulation. Remarkably, despite sharing very similar adsorption characteristics, variations in the potential energy surface are capable of prohibiting probe-induced positioning of one conformer, while simultaneously permitting manipulation of the alternative conformational form. Our results are interpreted in the context of dispersion-corrected density functional theory calculations which reveal significant differences in the diffusion barriers for each conformer. These results demonstrate that conformational variation significantly modifies the mechanical response of even simple porpyhrins, potentially affecting many other flexible molecules.

  10. Dynamical Mechanical Properties for AD90 Alumina

    Institute of Scientific and Technical Information of China (English)

    REN Hui-lan; NING Jian-guo; LI Ping

    2007-01-01

    The dynamic response of polycrystalline alumina was investigated in the pressure range of 0 -13 GPa by planar impact experiments.Velocity interferometer system for any reflector(VISAR) was used to obtain free surface velocity profile and determine the Hugoniot elastic limit,and manganin gauges were employed to obtain the stress-time histories and determine Hugoniot curve.Both the free surface particle velocity profiles and Hugoniot curves indicate the dispersion of the "plastic" wave for alumina.With the measured stress histories,the complete histories of strain,particle velocity,specific volume and specific internal energy are gained by using path line principle of Lagrange analysis.The dynamic mechanical behaviors for alumina under impact loading are analyzed,such as nonlinear characteristic,strain rate dependence,dispersion and declination of shock wave in the material.

  11. Mechanical properties and network structure of wheat gluten foams.

    Science.gov (United States)

    Blomfeldt, Thomas O J; Kuktaite, Ramune; Johansson, Eva; Hedenqvist, Mikael S

    2011-05-09

    This Article reports the influence of the protein network structure on the mechanical properties of foams produced from commercial wheat gluten using freeze-drying. Foams were produced from alkaline aqueous solutions at various gluten concentrations with or without glycerol, modified with bacterial cellulose nanosized fibers, or both. The results showed that 20 wt % glycerol was sufficient for plasticization, yielding foams with low modulus and high strain recovery. It was found that when fibers were mixed into the foams, a small but insignificant increase in elastic modulus was achieved, and the foam structure became more homogeneous. SEM indicated that the compatibility between the fibers and the matrix was good, with fibers acting as bridges in the cell walls. IR spectroscopy and SE-HPLC revealed a relatively low degree of aggregation, which was highest in the presence of glycerol. Confocal laser scanning microscopy revealed distinct differences in HMW-glutenin subunits and gliadin distributions for all of the different samples.

  12. Ultrasound-based testing of tendon mechanical properties

    DEFF Research Database (Denmark)

    Seynnes, O R; Bojsen-Møller, J.; Albracht, K

    2015-01-01

    In the past 20 years, the use of ultrasound-based methods has become a standard approach to measure tendon mechanical properties in vivo. Yet the multitude of methodological approaches adopted by various research groups probably contribute to the large variability of reported values. The technique...... of obtaining and relating tendon deformation to tensile force in vivo has been applied differently, depending on practical constraints or scientific points of view. Divergence can be seen in 1) methodological considerations, such as the choice of anatomical features to scan and to track, force measurements....... In doing so, our aim is to provide the reader with a qualitative analysis of ultrasound-based techniques. Finally, a list of recommendations is proposed for a number of selected issues....

  13. Mechanical properties and rapid consolidation of binderless niobium carbide

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Byung-Ryang [Division of Advanced Materials Engineering and the Research Center of Industrial Technology, Engineering College, Chonbuk National University, JeonJu, Jeonbuk, 561-756 (Korea, Republic of); Woo, Kee-Do [Division of Advanced Materials Engineering and the Research Center of Industrial Technology, Engineering College, Chonbuk National University, JeonJu, Jeonbuk, 561-756 (Korea, Republic of); Department of Hydrogen and Fuel Cells Engineering, Specialized Graduate School, Chonbuk National University, 561-756 (Korea, Republic of); Yoon, Jin-Kook; Doh, Jung-Mann [Advanced Functional Materials Research Center, Korea Institute of Science and Technology, PO Box 131, Cheongryang, Seoul, 130-650 (Korea, Republic of); Shon, In-Jin [Division of Advanced Materials Engineering and the Research Center of Industrial Technology, Engineering College, Chonbuk National University, JeonJu, Jeonbuk, 561-756 (Korea, Republic of)], E-mail: ijshon@chonbuk.ac.kr

    2009-07-29

    The rapid sintering of NbC hard materials in a short time was investigated with a focus on the manufacturing potential of the high-frequency induction-heating sintering process. The advantage of this process is that it allows for very quick densification to near theoretical density. A dense pure NbC hard material with a relative density of up to 98% was produced within 2 min from heating sample by the simultaneous application of a pressure of 80 MPa and an induced current corresponding to 70% of the total output powder capacity (15 kW). The finer the initial NbC powder size, the higher the density and the better the mechanical properties. The fracture toughness and hardness values obtained were 7.0 MPa m{sup 1/2} and 2200 kg/mm{sup 2}, respectively.

  14. Characterization and modelling of the mechanical properties of mineral wool

    DEFF Research Database (Denmark)

    Chapelle, Lucie

    2016-01-01

    the comparison of individual characteristics of different mineral wool materials and provide simple descriptors of the 3D structure. All the methods described here are applied to glass wool and stone wool. By developing a FEM model including the real characteristic of the mineral wool fibre structure, the effect......Mineral wool designates a highly porous network of fibres drawn by spinning molten minerals. Traditionally, mineral wool products have found application as thermal and acoustic insulation of buildings. Recent concepts where mineral wool products are subjected to higher structural loads have emerged...... properties of mineral wool relate closely to the arrangement and characteristics of the fibres inside the material. Because of the complex architecture of mineral wool, the characterization and the understanding of the mechanism of deformations require a new methodology. In this PhD thesis, a methodology...

  15. Enhancement of Stainless Steel's Mechanical Properties via Carburizing Process

    Science.gov (United States)

    Ahmad, S.; Alias, S. K.; Abdullah, B.; Hafiz Mohd Bakri, Mohd.; Hafizuddin Jumadin, Muhammad; Mat Shah, Muhammad Amir

    2016-11-01

    Carburizing process is a method to disperse carbon into the steel surface in order to enhance its mechanical properties such as hardness and wear resistance. This paper study investigates the effect of carburizing temperature to the carbon dispersion layer in stainless steel. The standard AISI 304 stainless steel was carburized in two different temperatures which were 900°C and 950°C. The effect of carbon dispersion layers were observed and the results indicated that the increasing value of the average dispersion layer from 1.30 mm to 2.74 mm thickness was found to be related to increment of carburizing holding temperature . The increment of carbon thickness layer also resulted in improvement of hardness and tensile strength of carburized stainless steel.

  16. Mechanical and Morphological Properties of Nano Filler Polyester Composites

    Directory of Open Access Journals (Sweden)

    Bonnia Noor Najmi

    2016-01-01

    Full Text Available This research is focusing on mechanical and morphological properties of unsaturated polyester (UP reinforced with two different types of filler which is nano size clay Cloisite 30B (C30B and Carbon Black (CB. Samples were fabricated via hand lay-up and open molding technique. Percentages of Cloisite 30B & Carbon Black (CB used vary from 0, 2, 4, 6, 8 and 10 wt%. The mechanical properties were evaluated by impact, flexural and hardness testing. Result shows that the mechanical strength of C30B was better compare to CB filled composite. The combination of UP with C30B helps to improve the properties due to the high surface area of nanosize filler in the matrix. The result shows that increasing of filler content had increased mechanical properties of composites. Optimum percentage represent good mechanical properties are 4% for both fillers. SEM images showed that rough surface image indicate to agglomeration of filler in the matrix for CB sample and smooth surface image on C30B sample indicate to homogenous blending between filler and matrix polyester. SEM images proved that mechanical properties result indicate that C30B polyester composite is a good reinforcement compare to CB polyester composite.

  17. Mechanical properties of short-flax-fibre reinforced compounds

    NARCIS (Netherlands)

    Bos, H.L.; Müssig, J.; Oever, van den M.J.A.

    2006-01-01

    The mechanical properties of flax/polypropylene compounds, manufactured both with a batch kneading and an extrusion process were determined and compared with the properties of Natural fibre Mat Thermoplastic (NMT) composites. The fibre length and width distributions of the fibres from the compounds

  18. Mechanisms Responsible for Microwave Properties in High Performance Dielectric Materials

    Science.gov (United States)

    Zhang, Shengke

    Microwave properties of low-loss commercial dielectric materials are optimized by adding transition-metal dopants or alloying agents (i.e. Ni, Co, Mn) to tune the temperature coefficient of resonant frequency (tau f) to zero. This occurs as a result of the temperature dependence of dielectric constant offsetting the thermal expansion. At cryogenic temperatures, the microwave loss in these dielectric materials is dominated by electron paramagnetic resonance (EPR) loss, which results from the spin-excitations of d-shell electron spins in exchange-coupled clusters. We show that the origin of the observed magnetically-induced shifts in the dielectric resonator frequency originates from the same mechanism, as described by the Kramers-Kronig relations. The temperature coefficient of resonator frequency, tauf, is related to three material parameters according to the equation, tau f = - (½ tauepsilon + ½ taumu + alphaL), where tauepsilon, taumu , and alphaL are the temperature coefficient of dielectric constant, magnetic permeability, and lattice constant, respectively. Each of these parameters for dielectric materials of interest are measured experimentally. These results, in combination with density functional simulations, developed a much improved understanding of the fundamental mechanisms responsible for tau f. The same experimental methods have been used to characterize in-situ the physical nature and concentration of performance-degrading point defects in the dielectrics of superconducting planar microwave resonators.

  19. Surface modification, microstructure and mechanical properties of investment cast superalloy

    OpenAIRE

    M. Zielińska; Kubiak, K.; J. Sieniawski

    2009-01-01

    Purpose: The aim of this work is to determine physical and chemical properties of cobalt aluminate (CoAl2O4) modifiers produced by different companies and the influence of different types of modifiers on the grain size, the microstructure and mechanical properties of high temperature creep resisting superalloy René 77.Design/methodology/approach: The first stage of the research work took over the investigations of physical and chemical properties of cobalt aluminate manufactured by three diff...

  20. Prediction of mechanical properties for hexagonal boron nitride nanosheets using molecular mechanics model

    Energy Technology Data Exchange (ETDEWEB)

    Natsuki, Toshiaki [Shinshu University, Faculty of Textile Science and Technology, Ueda (Japan); Shinshu University, Institute of Carbon Science and Technology, Nagano (Japan); Natsuki, Jun [Shinshu University, Institute of Carbon Science and Technology, Nagano (Japan)

    2017-04-15

    Mechanical behaviors of nanomaterials are not easy to be evaluated in the laboratory because of their extremely small size and difficulty controlling. Thus, a suitable model for the estimation of the mechanical properties for nanomaterials becomes very important. In this study, the elastic properties of boron nitride (BN) nanosheets, including the elastic modulus, the shear modulus, and the Poisson's ratio, are predicted using a molecular mechanics model. The molecular mechanics force filed is established to directly incorporate the Morse potential function into the constitutive model of nanostructures. According to the molecular mechanics model, the chirality effect of hexagonal BN nanosheets on the elastic modulus is investigated through a closed-form solution. The simulated result shows that BN nanosheets exhibit an isotropic elastic property. The present analysis yields a set of very simple formulas and is able to be served as a good approximation on the mechanical properties for the BN nanosheets. (orig.)

  1. Mechanical and Thermophysical Properties of Cerium Monopnictides

    Science.gov (United States)

    Bhalla, Vyoma; Singh, Devraj; Jain, S. K.

    2016-03-01

    The ultrasonic attenuation due to phonon-phonon interaction, thermoelastic relaxation and dislocation damping mechanisms has been investigated in cerium monopnictides CeX (X: N, P, As, Sb and Bi) for longitudinal and shear waves along {third-order elastic constants of CeX have also been computed in the temperature range 0 K to 500 K using Coulomb and Born-Mayer potential upto second nearest neighbours. The computed values of these elastic constants have been applied to find out Young's moduli, bulk moduli, Breazeale's non-linearity parameters, Zener anisotropy, ultrasonic velocity, ultrasonic Grüneisen parameter, thermal relaxation time, acoustic coupling constants and ultrasonic attenuation. The fracture/toughness ratio is less than 1.75, which shows that the chosen materials are brittle in nature as found for other monopnictides. The drag coefficient acting on the motion of screw and edge dislocations due to shear and compressional phonon viscosities of the lattice have also been evaluated for both the longitudinal and shear waves. The thermoelastic loss and dislocation damping loss are negligible in comparison to loss due to Akhieser damping (phonon-phonon interaction). The obtained results for CeX are in qualitative agreement with other semi-metallic monopnictides.

  2. Porosity and mechanical properties of zirconium ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Buyakova, S., E-mail: sbuyakova@ispms.tsc.ru; Kulkov, S. [Tomsk State University (Russian Federation); Tomsk Polytechnic University (Russian Federation); Institute of Strength Physics and Materials Science RAS (Russian Federation); Sablina, T. [Institute of Strength Physics and Materials Science RAS (Russian Federation)

    2015-11-17

    Has been studied a porous ceramics obtained from ultra-fine powders. Porous ceramic ZrO{sub 2}(MgO), ZrO{sub 2}(Y{sub 2}O{sub 3}) powder was prepared by pressing and subsequent sintering of compacts homologous temperatures ranging from 0.63 to 0.56 during the isothermal holding duration of 1 to 5 hours. The porosity of ceramic samples was from 15 to 80%. The structure of the ceramic materials produced from plasma-sprayed ZrO{sub 2} powder was represented as a system of cell and rod structure elements. Cellular structure formed by stacking hollow powder particles can be easily seen at the images of fracture surfaces of obtained ceramics. There were three types of pores in ceramics: large cellular hollow spaces, small interparticle pores which are not filled with powder particles and the smallest pores in the shells of cells. The cells generally did not have regular shapes. The size of the interior of the cells many times exceeded the thickness of the walls which was a single-layer packing of ZrO{sub 2} grains. A distinctive feature of all deformation diagrams obtained in the experiment was their nonlinearity at low deformations which was described by the parabolic law. It was shown that the observed nonlinear elasticity for low deformation on deformation diagrams is due to mechanical instability of the cellular elements in the ceramic carcass.

  3. Mechanical Properties of Nanoscopic Lipid Domains.

    Science.gov (United States)

    Nickels, Jonathan D; Cheng, Xiaolin; Mostofian, Barmak; Stanley, Christopher; Lindner, Benjamin; Heberle, Frederick A; Perticaroli, Stefania; Feygenson, Mikhail; Egami, Takeshi; Standaert, Robert F; Smith, Jeremy C; Myles, Dean A A; Ohl, Michael; Katsaras, John

    2015-12-23

    The lipid raft hypothesis presents insights into how the cell membrane organizes proteins and lipids to accomplish its many vital functions. Yet basic questions remain about the physical mechanisms that lead to the formation, stability, and size of lipid rafts. As a result, much interest has been generated in the study of systems that contain similar lateral heterogeneities, or domains. In the current work we present an experimental approach that is capable of isolating the bending moduli of lipid domains. This is accomplished using neutron scattering and its unique sensitivity to the isotopes of hydrogen. Combining contrast matching approaches with inelastic neutron scattering, we isolate the bending modulus of ∼13 nm diameter domains residing in 60 nm unilamellar vesicles, whose lipid composition mimics the mammalian plasma membrane outer leaflet. Importantly, the bending modulus of the nanoscopic domains differs from the modulus of the continuous phase surrounding them. From additional structural measurements and all-atom simulations, we also determine that nanoscopic domains are in-register across the bilayer leaflets. Taken together, these results inform a number of theoretical models of domain/raft formation and highlight the fact that mismatches in bending modulus must be accounted for when explaining the emergence of lateral heterogeneities in lipid systems and biological membranes.

  4. Mechanical properties of lanthanum and yttrium chromites

    Energy Technology Data Exchange (ETDEWEB)

    Paulik, S.W.; Armstrong, T.R. [Pacific Northwest National Lab., Richland, WA (United States)

    1996-12-31

    In an operating high-temperature (1000{degrees}C) solid oxide fuel cell (SOFC), the interconnect separates the fuel (P(O{sub 2}){approx}10{sup -16} atm) and the oxidant (P(O2){approx}10{sup 0.2} atm), while being electrically conductive and connecting the cells in series. Such severe atmospheric and thermal demands greatly reduce the number of viable candidate materials. Only two materials, acceptor substituted lanthanum chromite and yttrium chromite, meet these severe requirements. In acceptor substituted chromites (Sr{sup 2+} or Ca{sup 2+} for La{sup 3+}), charge compensation is primarily electronic in oxidizing conditions (through the formation of Cr{sup 4+}). Under reducing conditions, ionic charge compensation becomes significant as the lattice becomes oxygen deficient. The formation of oxygen vacancies is accompanied by the reduction of Cr{sup 4+} ions to Cr{sup 3+} and a resultant lattice expansion. The lattice expansion observed in large chemical potential gradients is not desirable and has been found to result in greatly reduced mechanical strength.

  5. Autoclaving and clinical recycling: Effects on mechanical properties of orthodontic wires

    Directory of Open Access Journals (Sweden)

    M Oshagh

    2012-01-01

    Conclusion: Although recycle wires were softer than those of control group, relatively small differences and also various properties of available wires have obscured the clinical predictability of their application. There is seemingly no problem in terms of mechanical properties to recycle orthodontic wires.

  6. Embedding Properties Related to System Permutability

    Institute of Scientific and Technical Information of China (English)

    Tom Kimber

    2002-01-01

    A subgroup U of a finite solvable group G is system permutable in G if there is a Hall system ∑ of G such that US ≤ G for all S ∈∑. We introduce and investigate three properties, each apparently weaker than system permutability.We show that all three properties are equivalent to system permutability in a group of p-length at most 1 for each prime p, and they determine the same subgroup closed class as system permutability. We give an example to show that two of these properties are weaker than system permutability. For the third property,this is unresolved.

  7. In vitro indentation to determine the mechanical properties of epidermis

    NARCIS (Netherlands)

    Geerligs, M.; Van Breemen, L.; Peters, G.W.M.; Ackermans, P.A.J.; Baaijens,F.P.T.; Oomens, C.

    2011-01-01

    The lack of understanding of the mechanical behavior of the human skin layers makes the development of drug delivery using microneedles or microjets a challenging task. In particular, the key mechanical properties of the epidermis composed of stratum corneum and viable epidermis, should be better

  8. High temperature mechanical properties of iron aluminides

    Directory of Open Access Journals (Sweden)

    Morris, D. G.

    2001-04-01

    Full Text Available Considerable attention has been given to the iron aluminide family of intermetallics over the past years since they offer considerable potential as engineering materials for intermediate to high temperature applications, particularly in cases where extreme oxidation or corrosion resistance is required. Despite efforts at alloy development, however, high temperature strength remains low and creep resistance poor. Reasons for the poor high-temperature strength of iron aluminides will be discussed, based on the ordered crystal structure, the dislocation structure found in the material, and the mechanisms of dislocation pinning operating. Alternative ways of improving high temperature strength by microstructural modification and the inclusion of second phase particles will also be considered.

    Durante los últimos años se ha prestado mucha atención a la familia de intermetálicos Fe-Al, puesto que estos constituyen un considerable potencial como materiales de ingeniería en aplicaciones a temperaturas intermedias o altas, sobre todo en casos donde se necesita alta resistencia a la oxidación o corrosión. A pesar del considerable esfuerzo desarrollado para obtener aleaciones con mejores propiedades, su resistencia mecánica a alta temperatura no es muy elevada. Se discutirán los aspectos que contribuyen a la baja resistencia mecánica a temperatura elevada en función de la estructura de dislocaciones y los mecanismos de anclaje que operan en este intermetálico. Se considerarán, también, maneras alternativas para mejorar la resistencia a temperatura elevada mediante la modificación de la microestructura y la incorporación de partículas de segunda fase.

  9. Mechanical and biological properties of keratose biomaterials.

    Science.gov (United States)

    de Guzman, Roche C; Merrill, Michelle R; Richter, Jillian R; Hamzi, Rawad I; Greengauz-Roberts, Olga K; Van Dyke, Mark E

    2011-11-01

    The oxidized form of extractable human hair keratin proteins, commonly referred to as keratose, is gaining interest as a biomaterial for multiple tissue engineering studies including those directed toward peripheral nerve, spinal cord, skin, and bone regeneration. Unlike its disulfide cross-linked counterpart, kerateine, keratose does not possess a covalently cross-linked network structure and consequently displays substantially different characteristics. In order to understand its mode(s) of action and potential for clinical translatability, detailed characterization of the composition, physical properties, and biological responses of keratose biomaterials are needed. Keratose was obtained from end-cut human hair fibers by peracetic acid treatment, followed by base extraction, and subsequent dialysis. Analysis of lyophilized keratose powder determined that it contains 99% proteins by mass with amino acid content similar to human hair cortex. Metallic elements were also found in minute quantities. Protein oxidation led to disulfide bond cleavage and drastic reduction of free thiols due to conversion of sulfhydryl to sulfonic acid, chain fragmentation, and amino acid modifications. Mass spectrometry identified the major protein constituents as a heterogeneous mixture of 15 hair keratins (type I: K31-35 and K37-39, and type II: K81-86) with small amounts of epithelial keratins which exist in monomeric, dimeric, multimeric, and even degraded forms. Re-hydration with PBS enabled molecular assembly into an elastic solid-like hydrogel. Highly-porous scaffolds formed by lyophilization of the gel had the compression behavior of a cellular foam material and reverted back to gel upon wetting. Cytotoxicity assays showed that the EC50 for various cell lines were attained at 8-10 mg/mL keratose, indicating the non-toxic nature of the material. Implantation in mouse subcutaneous tissue pockets demonstrated that keratose resorption follows a rectangular hyperbolic regression

  10. Mechanical properties of branched actin filaments

    CERN Document Server

    Razbin, Mohammadhosein; Benetatos, Panayotis; Zippelius, Annette

    2015-01-01

    Cells moving on a two dimensional substrate generate motion by polymerizing actin filament networks inside a flat membrane protrusion. New filaments are generated by branching off existing ones, giving rise to branched network structures. We investigate the force-extension relation of branched filaments, grafted on an elastic structure at one end and pushing with the free ends against the leading edge cell membrane. Single filaments are modeled as worm-like chains, whose thermal bending fluctuations are restricted by the leading edge cell membrane, resulting in an effective force. Branching can increase the stiffness considerably; however the effect depends on branch point position and filament orientation, being most pronounced for intermediate tilt angles and intermediate branch point positions. We describe filament networks without cross-linkers to focus on the effect of branching. We use randomly positioned branch points, as generated in the process of treadmilling, and orientation distributions as measur...

  11. Mechanical Properties and Durability of "Waterless Concrete"

    Science.gov (United States)

    Toutanji, Houssam; Grugel, Richard N.

    2008-01-01

    Waterless concrete consists of molten elementary sulfur and aggregate. The aggregates in lunar environment will be lunar rocks and soil. Sulfur is present on the Moon in Troilite soil (FeS) and by oxidation soil iron and sulfur can be produced. Iron can be used to reinforce the sulfur concrete. Sulfur concrete specimens were cycled between liquid nitrogen (approximately 191 C) and room temperature (approximately 21 C) to simulate exposure to a lunar environment. Cycled and control specimens were subsequently tested in compression at room temperatures (approximately 21 C) and approximately 101 C. Test results showed that due to temperature cycling, compressive strength of cycled specimens was 20% of those non-cycled. Microscopic examination of the fracture surfaces from the cycled samples showed clear de-bonding of the sulfur from the aggregate material whereas it was seen well bonded in those non-cycled. This reduction in strength can be attributed to the large differences in thermal coefficients of expansion of the materials constituting the concrete which promoted cracking. Similar sulfur concrete mixtures were strengthened with short and long glass fibers. The glass fibers from lunar regolith simulant was melted in a 25 cc Pt-Rh crucible in a Sybron Thermoline high temperature MoSi2 furnace at melting temperatures of 1450 to 1600 C for times of 30 min to 1 hour. Glass fibers were cast from the melt into graphite crucibles and were annealed for a couple of hours at 600 C. Glass fibers and small rods were pulled from the melt. The glass melt wets the ceramic rod and long continuous glass fibers were easily hand drawn. The glass fibers were immediately coated with a protective polymer to maintain the mechanical strength. The glass fibers were used to reinforce sulfur concrete plated to improve the flexural strength of the sulfur concrete. Prisms beams strengthened with glass fibers were tested in 4-point bending test. Beams strengthened with glass fiber showed to

  12. Mechanical Properties and Durability of "Waterless Concrete"

    Science.gov (United States)

    Toutanji, Houssam; Grugel, Richard N.

    2008-01-01

    Waterless concrete consists of molten elementary sulfur and aggregate. The aggregates in lunar environment will be lunar rocks and soil. Sulfur is present on the Moon in Troilite soil (FeS) and by oxidation soil iron and sulfur can be produced. Iron can be used to reinforce the sulfur concrete. Sulfur concrete specimens were cycled between liquid nitrogen (approximately 191 C) and room temperature (approximately 21 C) to simulate exposure to a lunar environment. Cycled and control specimens were subsequently tested in compression at room temperatures (approximately 21 C) and approximately 101 C. Test results showed that due to temperature cycling, compressive strength of cycled specimens was 20% of those non-cycled. Microscopic examination of the fracture surfaces from the cycled samples showed clear de-bonding of the sulfur from the aggregate material whereas it was seen well bonded in those non-cycled. This reduction in strength can be attributed to the large differences in thermal coefficients of expansion of the materials constituting the concrete which promoted cracking. Similar sulfur concrete mixtures were strengthened with short and long glass fibers. The glass fibers from lunar regolith simulant was melted in a 25 cc Pt-Rh crucible in a Sybron Thermoline high temperature MoSi2 furnace at melting temperatures of 1450 to 1600 C for times of 30 min to 1 hour. Glass fibers were cast from the melt into graphite crucibles and were annealed for a couple of hours at 600 C. Glass fibers and small rods were pulled from the melt. The glass melt wets the ceramic rod and long continuous glass fibers were easily hand drawn. The glass fibers were immediately coated with a protective polymer to maintain the mechanical strength. The glass fibers were used to reinforce sulfur concrete plated to improve the flexural strength of the sulfur concrete. Prisms beams strengthened with glass fibers were tested in 4-point bending test. Beams strengthened with glass fiber showed to

  13. Mechanical Properties of Graphene Nanoplatelet/Carbon Fiber/Epoxy Hybrid Composites: Multiscale Modeling and Experiments

    Science.gov (United States)

    Hadden, C. M.; Klimek-McDonald, D. R.; Pineda, E. J.; King, J. A.; Reichanadter, A. M.; Miskioglu, I.; Gowtham, S.; Odegard, G. M.

    2015-01-01

    Because of the relatively high specific mechanical properties of carbon fiber/epoxy composite materials, they are often used as structural components in aerospace applications. Graphene nanoplatelets (GNPs) can be added to the epoxy matrix to improve the overall mechanical properties of the composite. The resulting GNP/carbon fiber/epoxy hybrid composites have been studied using multiscale modeling to determine the influence of GNP volume fraction, epoxy crosslink density, and GNP dispersion on the mechanical performance. The hierarchical multiscale modeling approach developed herein includes Molecular Dynamics (MD) and micromechanical modeling, and it is validated with experimental testing of the same hybrid composite material system. The results indicate that the multiscale modeling approach is accurate and provides physical insight into the composite mechanical behavior. Also, the results quantify the substantial impact of GNP volume fraction and dispersion on the transverse mechanical properties of the hybrid composite, while the effect on the axial properties is shown to be insignificant.

  14. Mechanical Properties of Graphene Nanoplatelet Carbon Fiber Epoxy Hybrid Composites: Multiscale Modeling and Experiments

    Science.gov (United States)

    Hadden, Cameron M.; Klimek-McDonald, Danielle R.; Pineda, Evan J.; King, Julie A.; Reichanadter, Alex M.; Miskioglu, Ibrahim; Gowtham, S.; Odegard, Gregory M.

    2015-01-01

    Because of the relatively high specific mechanical properties of carbon fiber/epoxy composite materials, they are often used as structural components in aerospace applications. Graphene nanoplatelets (GNPs) can be added to the epoxy matrix to improve the overall mechanical properties of the composite. The resulting GNP/carbon fiber/epoxy hybrid composites have been studied using multiscale modeling to determine the influence of GNP volume fraction, epoxy crosslink density, and GNP dispersion on the mechanical performance. The hierarchical multiscale modeling approach developed herein includes Molecular Dynamics (MD) and micromechanical modeling, and it is validated with experimental testing of the same hybrid composite material system. The results indicate that the multiscale modeling approach is accurate and provides physical insight into the composite mechanical behavior. Also, the results quantify the substantial impact of GNP volume fraction and dispersion on the transverse mechanical properties of the hybrid composite, while the effect on the axial properties is shown to be insignificant.

  15. Lithophysal Rock Mass Mechanical Properties of the Repository Host Horizon

    Energy Technology Data Exchange (ETDEWEB)

    D. Rigby

    2004-11-10

    The purpose of this calculation is to develop estimates of key mechanical properties for the lithophysal rock masses of the Topopah Spring Tuff (Tpt) within the repository host horizon, including their uncertainties and spatial variability. The mechanical properties to be characterized include an elastic parameter, Young's modulus, and a strength parameter, uniaxial compressive strength. Since lithophysal porosity is used as a surrogate property to develop the distributions of the mechanical properties, an estimate of the distribution of lithophysal porosity is also developed. The resulting characterizations of rock parameters are important for supporting the subsurface design, developing the preclosure safety analysis, and assessing the postclosure performance of the repository (e.g., drift degradation and modeling of rockfall impacts on engineered barrier system components).

  16. Nuclearity Related Properties in Operator Systems

    CERN Document Server

    Kavruk, Ali Samil

    2011-01-01

    Some recent research on the tensor products of operator systems and ensuing nuclearity properties in this setting raised many stability problems. In this paper we examine the preservation of these nuclearity properties including exactness, local liftibility and double commutant expectation property under basic algebraic operations such as quotient, duality, coproducts and tensor products. We show that, in the ?finite dimensional case, exactness and lifting property are dual pairs, that is, an operator system $S$ is exact if and only if the dual operator system $S^d$ has the lifting property. Moreover, the lifting property is preserved under quotients by null subspaces. Again in the finite dimensional case we prove that every operator system has k-lifting property in the sense that whenever $f:S -> A/I$ is a ucp map, where A is a C*-algebra and I is an ideal, then $f$ possess a unital k-positive lift on A, for every k. This property provides a novel proof of a classical result of Smith and Ward on the preserva...

  17. Compressive and tensile mechanical properties of the porcine nasal septum

    OpenAIRE

    Al Dayeh, Ayman A.; HERRING, SUSAN W.

    2013-01-01

    The expanding nasal septal cartilage is believed to create a force that powers midfacial growth. In addition, the nasal septum is postulated to act as a mechanical strut that prevents the structural collapse of the face under masticatory loads. Both roles imply that the septum is subject to complex biomechanical loads during growth and mastication. The purpose of this study was to measure the mechanical properties of the nasal septum to determine (1) whether the cartilage is mechanically capa...

  18. Mechanical Properties of Isotactic Polypropylene Modified with Thermoplastic Potato Starch

    Science.gov (United States)

    Knitter, M.; Dobrzyńska-Mizera, M.

    2015-05-01

    In this paper selected mechanical properties of isotactic polypropylene (iPP) modified with potato starch have been presented. Thermoplastic starch (TPS) used as a modifier in the study was produced from potato starch modified with glycerol. Isotactic polypropylene/thermoplastic potato starch composites (iPP/TPS) that contained 10, 30, 50 wt.% of modified starch were examined using dynamic mechanical-thermal analysis, static tensile, Brinell hardness, and Charpy impact test. The studies indicated a distinct influence of a filler content on the mechanical properties of composites in comparison with non-modified polypropylene.

  19. Mechanical and Morphological Properties of Nano Filler Polyester Composites

    OpenAIRE

    Bonnia Noor Najmi; Redzuan Aein Afina; Shuhaimeen Nurul Shakirah

    2016-01-01

    This research is focusing on mechanical and morphological properties of unsaturated polyester (UP) reinforced with two different types of filler which is nano size clay Cloisite 30B (C30B) and Carbon Black (CB). Samples were fabricated via hand lay-up and open molding technique. Percentages of Cloisite 30B & Carbon Black (CB) used vary from 0, 2, 4, 6, 8 and 10 wt%. The mechanical properties were evaluated by impact, flexural and hardness testing. Result shows that the mechanical strength of ...

  20. Effect of vitro preservation on mechanical properties of brain tissue

    Science.gov (United States)

    Zhang, Wei; Liu, Yi-fan; Liu, Li-fu; Niu, Ying; Ma, Jian-li; Wu, Cheng-wei

    2017-05-01

    To develop the protective devices for preventing traumatic brain injuries, it requires the accurate characterization of the mechanical properties of brain tissue. For this, it necessary to elucidate the effect of vitro preservation on the mechanical performance of brain tissue as usually the measurements are carried out in vitro. In this paper, the thermal behavior of brain tissue preserved for various period of time was first investigated and the mechanical properties were also measured. Both reveals the deterioration with prolonged preservation duration. The observations of brain tissue slices indicates the brain tissue experiences karyorrhexis and karyorrhexis in sequence, which accounts for the deterioration phenomena.

  1. Antimicrobial Properties of α-MSH and Related Synthetic Melanocortins

    Directory of Open Access Journals (Sweden)

    A. Catania

    2006-01-01

    Full Text Available The natural antimicrobial peptides are ancient host defense effector molecules, present in organisms across the evolutionary spectrum. Several properties of α-melanocyte stimulating hormone (α-MSH suggested that it could be a natural antimicrobial peptide. α-MSH is a primordial peptide that appeared during the Paleozoic era, long before adaptive immunity developed and, like natural antimicrobial molecules, is produced by barrier epithelia, immunocytes, and within the central nervous system. α-MSH was discovered to have antimicrobial activity against two representative pathogens, Staphylococcus aureus and Candida albicans. The candidacidal influences of α-MSH appeared to be mediated by increases in cell cyclic adenosine monophosphate (cAMP. The cAMP-inducing capacity of α-MSH likely interferes with the yeast's own regulatory mechanisms of this essential signaling pathway. It is remarkable that this mechanism of action in yeast mimics the influences of α-MSH in mammalian cells in which the peptide binds to G-protein-linked melanocortin receptors, activates adenylyl cyclase, and increases cAMP. When considering that most of the natural antimicrobial peptides enhance the local inflammatory reaction, the anti-inflammatory and antipyretic effects of α-MSH confer unique properties to this molecule relative to other natural antimicrobial molecules. Synthetic derivatives, chemically stable and resistant to enzymatic degradation, could form the basis for novel therapies that combine anti-inflammatory and antimicrobial properties.

  2. Mechanical properties of canine patella-ligament-tibia segment.

    Science.gov (United States)

    Biskup, Jeffery; Freeman, Andy; Camisa, Will; Innes, John; Conzemius, Michael

    2014-02-01

    To test the ex vivo mechanical properties of canine patella-ligament-tibia (PLT) segment and establish the relationship between donor size and PLT dimensions to the mechanical properties of PLT grafts. Ex vivo mechanical testing study. Canine PLT segments (n = 21 dogs; 42 PLT). Morphometric measurements of PLT segments were taken from computed tomography (CT) images and compared with results obtained using calipers. PLT were tested to failure at a rate of 100% length/s. Mechanical properties and failure mode were recorded. PLT width and thickness (P 25 kg were similar to those reported for the cranial cruciate ligament (CCL) suggesting that the PLT may be a suitable allograft for CCL replacement. © Copyright 2013 by The American College of Veterinary Surgeons.

  3. Non-linear static and dynamic mechanical properties and constitutive relation of sponge rubber%海绵橡胶非线性静动态力学特性和本构关系

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

      针对海绵橡胶的物理特性展开了准静态单轴压缩实验和分离式Hopkinson压杆动态压缩实验,得到海绵橡胶材料的应力-应变曲线,并对材料的应变率效应及材料的变形和破坏特性进行深入分析,在此基础上给出材料的动静态本构关系。结果表明:海绵橡胶材料在准静态加载下,应变大于0.3时,应力-应变曲线才开始偏离坐标轴,表现出非线性特征;在冲击载荷下,海绵橡胶的应变率效应并不明显。%Quasi⁃static uniaxial compression test and SHPB dynamic compression experiments were carried out on the physical properties of sponge rubber. Basic mechanical parameters and stress ⁃ strain curve of the rubber were obtained through experiments. The static and dynamic constitutive model was presented based on necessary analysis of deformation behavior of materials,strain rate effects and destruction properties. The results show that under quasi⁃static loading with strain more than 0.3,stress⁃strain curve begins to be off the coordinate axis and appears the nonlinear property;strain rate effect is not obvious under shock loading with the increase of strain rate.

  4. Muscle - tendon unit mechanical and morphological properties and sprint performance.

    Science.gov (United States)

    Stafilidis, Savvas; Arampatzis, Adamantios

    2007-07-01

    The objective of this study was to determine whether sprint performance is related to the mechanical (elongation - force relationship of the tendon and aponeurosis, muscle strength) and morphological (fascicle length, pennation angle, muscle thickness) properties of the quadriceps femoris and triceps surae muscle - tendon units. Two groups of sprinters (slow, n = 11; fast, n = 17) performed maximal isometric knee extension and plantar flexion contractions on a dynamometer at 11 different muscle - tendon unit lengths. Elongation of the tendon and aponeurosis of the gastrocnemius medialis and the vastus lateralis was measured using ultrasonography. We observed no significant differences in maximal joint moments at the ankle and knee joints or morphological properties of the gastrocnemius medialis and vastus lateralis between groups (P > 0.05). The fast group exhibited greater elongation of the vastus lateralis tendon and aponeurosis at a given tendon force, and greater maximal elongation of the vastus lateralis tendon and aponeurosis during maximum voluntary contraction (P aponeurosis showed a significant correlation with 100-m sprint times (r = -0.567, P = 0.003). For the elongation - force relationship at the gastrocnemius medialis tendon and aponeurosis, the two groups recorded similar values. It is suggested that the greater elongation of the vastus lateralis tendon and aponeurosis of the fast group benefits energy storage and return as well as the shortening velocity of the muscle - tendon unit.

  5. Antioxidant Property of Jobelyn as the Possible Mechanism Underlying

    Directory of Open Access Journals (Sweden)

    Solomon Umukoro

    2013-01-01

    Full Text Available   Introduction: Amnesia or loss of memory is the cardinal hallmark of Alzheimer’s disease (AD, a progressive neurodegenerative disorder associated with ageing process. Although, AD had been discovered over a century ago, drugs which could cure or halt the progression of the disease are yet to see the light of the day. However, there has been a growing interest in the use of phytomedicines with multipronged mechanisms of action that could target various aspects of the pathologies of AD. Jobelyn (JB is a potent antioxidant African polyherbal formulation with active components that have been acclaimed to show neuroprotection. T his investigation was carried out to evaluate whether JB has anti-amnesic and antioxidant activities.   Methods: The alteration of alternation behavior in the Y-maze paradigm was utilized as the test for memory function in mice. The effect of JB on a cetylcholinesterase (AChE activity, malondialdehyde (MDA level and the concentrations of glutathione (GSH in the frontal cortex and hippocampus were assessed in rats as means of providing insight into the mechanism underlying its anti-amnesic activity. The animals were given JB (1, 2.5 or 5mg/kg, i.p. daily for 7 days before the biochemical assays or test for memory functions were carried out.   Results: JB was found to produce a significant increase in the level of alternation behavior compared with the control, suggesting anti-amnesic activity. Also, JB reversed the memory impairment induced by scopolamine, which further indicates anti-amnesic property. Furthermore, JB demonstrated a significant inhibition of MDA formation in the frontal cortex and hippocampus of rats, indicating antioxidant property. In addition, it increased the defense armory of the brain tissues, as it significantly increased the concentrations of GSH in the frontal cortex and hippocampus of rats. However, JB did not demonstrate any inhibitory effect against AChE activity in the frontal cortex and

  6. RELATIONAL MECHANISMS IN INNOVATION CO-CREATION

    Directory of Open Access Journals (Sweden)

    Rodica Boier

    2014-12-01

    Full Text Available Increasingly, producers and customers establish relationships to mutually undertake the development of an innovative product. Consequently, it will be always of interest for an innovative company to know the degree to which different related suppliers are willing to form partnerships by participating in its new product development process. Several managerial implications flow from the link between relationship marketing and innovation processes, ranging from tactical product-related decisions to strategic competitor-related decisions, usually made in a relatively short period of time. Dedicated customer relationship systems track the interactions with customers and improve the flow of ideas for new products. When trying to develop long-term customer relationships, the ability to provide superior value to stakeholders is a must. Through carefully conducted relationships, customers are linked with the innovation company during the entire innovation process, and create a space for mutual understanding, learning and value co-creation. In order to co-create business value through online, also combined with offline innovation-related activities, customer orientation should be implemented throughout the organization – its culture, their systems, including the whole range of interactions.

  7. Hydroxyapatite reinforced collagen scaffolds with improved architecture and mechanical properties.

    Science.gov (United States)

    Kane, Robert J; Weiss-Bilka, Holly E; Meagher, Matthew J; Liu, Yongxing; Gargac, Joshua A; Niebur, Glen L; Wagner, Diane R; Roeder, Ryan K

    2015-04-01

    Hydroxyapatite (HA) reinforced collagen scaffolds have shown promise for synthetic bone graft substitutes and tissue engineering scaffolds. Freeze-dried HA-collagen scaffolds are readily fabricated and have exhibited osteogenicity in vivo, but are limited by an inherent scaffold architecture that results in a relatively small pore size and weak mechanical properties. In order to overcome these limitations, HA-collagen scaffolds were prepared by compression molding HA reinforcements and paraffin microspheres within a suspension of concentrated collagen fibrils (∼ 180 mg/mL), cross-linking the collagen matrix, and leaching the paraffin porogen. HA-collagen scaffolds exhibited an architecture with high porosity (85-90%), interconnected pores ∼ 300-400 μm in size, and struts ∼ 3-100 μm in thickness containing 0-80 vol% HA whisker or powder reinforcements. HA reinforcement enabled a compressive modulus of up to ∼ 1 MPa, which was an order of magnitude greater than unreinforced collagen scaffolds. The compressive modulus was also at least one order of magnitude greater than comparable freeze-dried HA-collagen scaffolds and two orders of magnitude greater than absorbable collagen sponges used clinically. Moreover, scaffolds reinforced with up to 60 vol% HA exhibited fully recoverable elastic deformation upon loading to 50% compressive strain for at least 100,000 cycles. Thus, the scaffold mechanical properties were well-suited for surgical handling, fixation, and bearing osteogenic loads during bone regeneration. The scaffold architecture, permeability, and composition were shown to be conducive to the infiltration and differentiation of adipose-derive stromal cells in vitro. Acellular scaffolds were demonstrated to induce angiogenesis and osteogenesis after subcutaneous ectopic implantation by recruiting endogenous cell populations, suggesting that the scaffolds were osteoinductive.

  8. Hollow polyelectrolyte multilayer tubes: mechanical properties and shape changes.

    Science.gov (United States)

    Mueller, Renate; Daehne, Lars; Fery, Andreas

    2007-07-26

    In this paper, novel hollow polyelectrolyte multilayer tubes from poly(diallyldimethylammonium chloride) (PDADMAC), poly(styrene sulfonate) (PSS), and poly(allylamine hydrochloride) (PAH) were prepared: Readily available glass fiber templates are coated with polyelectrolytes using the layer-by-layer technique, followed by subsequent fiber dissolution. Depending on the composition of the polymeric multilayer, stable hollow tubes or tubes showing a pearling instability are observed. This instability corresponds to the Rayleigh instability and is a consequence of an increased mobility of the polyelectrolyte chains within the multilayer. The well-defined stable tubes were characterized with fluorescence microscopy, confocal laser scanning microscopy, and atomic force microscopy (AFM). The tubes were found to be remarkably free of defects, which results in an impermeable tube wall for even low molecular weight molecules. The mechanical properties of the tubes were determined with AFM force spectroscopy in water, and because continuum mechanical models apply, the Young's modulus of the wall material was determined. Additionally, scaling relations for the dependency of tube stiffness on diameter and wall thickness were validated. Because both parameters can be experimentally controlled by our approach, the deformability of the tubes can be varied over a broad range and adjusted for the particular needs.

  9. Metal Additive Manufacturing: A Review of Mechanical Properties

    Science.gov (United States)

    Lewandowski, John J.; Seifi, Mohsen

    2016-07-01

    This article reviews published data on the mechanical properties of additively manufactured metallic materials. The additive manufacturing techniques utilized to generate samples covered in this review include powder bed fusion (e.g., EBM, SLM, DMLS) and directed energy deposition (e.g., LENS, EBF3). Although only a limited number of metallic alloy systems are currently available for additive manufacturing (e.g., Ti-6Al-4V, TiAl, stainless steel, Inconel 625/718, and Al-Si-10Mg), the bulk of the published mechanical properties information has been generated on Ti-6Al-4V. However, summary tables for published mechanical properties and/or key figures are included for each of the alloys listed above, grouped by the additive technique used to generate the data. Published values for mechanical properties obtained from hardness, tension/compression, fracture toughness, fatigue crack growth, and high cycle fatigue are included for as-built, heat-treated, and/or HIP conditions, when available. The effects of test orientation/build direction on properties, when available, are also provided, along with discussion of the potential source(s) (e.g., texture, microstructure changes, defects) of anisotropy in properties. Recommendations for additional work are also provided.

  10. Relating tensile properties with flexural properties in SHCC

    NARCIS (Netherlands)

    Qian, S.; Li, V.C.; Zhou, J.

    2010-01-01

    Strain hardening cementitious composites (SHCCs) have seen increasing field applications in past decade, yet existing quality control test methods for tensile properties are sometime difficult to implement. This paper presents a new simple inverse method for quality control of tensile strain

  11. Relating tensile properties with flexural properties in SHCC

    NARCIS (Netherlands)

    Qian, S.; Li, V.C.; Zhou, J.

    2010-01-01

    Strain hardening cementitious composites (SHCCs) have seen increasing field applications in past decade, yet existing quality control test methods for tensile properties are sometime difficult to implement. This paper presents a new simple inverse method for quality control of tensile strain capacit

  12. Evolved Mechanisms Versus Underlying Conditional Relations

    Directory of Open Access Journals (Sweden)

    Astorga Miguel López

    2015-03-01

    Full Text Available The social contracts theory claims that, in social exchange circumstances, human reasoning is not necessarily led by logic, but by certain evolved mental mechanisms that are useful for catching offenders. An emblematic experiment carried out with the intention to prove this thesis is the first experiment described by Fiddick, Cosmides, and Tooby in their paper of 2000. Lopez Astorga has questioned that experiment claiming that its results depend on an underlying conditional logical form not taken into account by Fiddick, Cosmides, and Tooby. In this paper, I propose an explanation alternative to that of Lopez Astorga, which does not depend on logical forms and is based on the mental models theory. Thus, I conclude that this other alternative explanation is one more proof that the experiment in question does not demonstrate the fundamental thesis of the social contracts theory.

  13. Mechanical, Thermal and Dynamic Mechanical Properties of PP/GF/xGnP Nanocomposites

    Science.gov (United States)

    Ashenai Ghasemi, F.; Ghorbani, A.; Ghasemi, I.

    2017-03-01

    The mechanical, thermal, and dynamic mechanical properties of ternary nanocomposites based on polypropylene, short glass fibers, and exfoliated graphene nanoplatelets were studied. To investigate the mechanical properties, uniaxial tensile and Charpy impact tests were carried out. To study the crystallinity of the compositions, a DSC test was performed. A dynamic mechanical analysis was used to characterize the storage modulus and loss factor (tan δ). The morphology of the composites was studied by a scanning electron microscope (SEM). The results obtained are presented in tables and graphics.

  14. Finite Element Simulation of the Mechanical Properties of Mineralized Biomaterials

    Science.gov (United States)

    Yuan, Fang

    Mineralized biomaterials are natural composite materials with both biomineral and biopolymer phases. They have attracted intense attention in the past decades, due to their outstanding mechanical properties and great potential as future materials. Such exceptional properties are believed to be attributed to their complex structures. Therefore, two different mineralized biomaterials (bone and sea urchin spine) were studied mainly by the finite element method and their structure-mechanical properties relationships were investigated. The research on bone was performed with a bottom-up approach. We focused on the nanoscale level structure-properties relationship first: the models of mineralized collagen fibril, consisting of hydroxyapatite platelets aligned within a collagen matrix, were created and the importance of the parameters defining its structure and constituent properties was evaluated. With the elastic model well established, the long-term mechanical behavior at nanoscale level was studied. The viscoelastic properties of undamaged collagen phase were deduced from low-irradiation-dosage creep measurements, then different damage scenarios were evaluated to explain the evolution of phase strains with larger irradiation dosage. The higher level structure-properties relationship of bone was simulated by two different approaches: 1) Assuming the macroscopic composite strain was comparable to nanoscale fibrillar strain, then based on nanoscale model, the macroscopic distributions of nanoscale phase strains were investigated; 2) Considering the structural complexity of bone at several length scales, the effective properties from lower scales were applied as the input properties at higher scales, and the elastic properties at each level were investigated. The computational results were validated by experimental data obtained by synchrotron X-ray diffraction and show the mechanical properties of bone are greatly influenced by its structure. The research on sea urchin

  15. Relationships among the structural topology, bond strength, and mechanical properties of single-walled aluminosilicate nanotubes.

    Science.gov (United States)

    Liou, Kai-Hsin; Tsou, Nien-Ti; Kang, Dun-Yen

    2015-10-21

    Carbon nanotubes (CNTs) are regarded as small but strong due to their nanoscale microstructure and high mechanical strength (Young's modulus exceeds 1000 GPa). A longstanding question has been whether there exist other nanotube materials with mechanical properties as good as those of CNTs. In this study, we investigated the mechanical properties of single-walled aluminosilicate nanotubes (AlSiNTs) using a multiscale computational method and then conducted a comparison with single-walled carbon nanotubes (SWCNTs). By comparing the potential energy estimated from molecular and macroscopic material mechanics, we were able to model the chemical bonds as beam elements for the nanoscale continuum modeling. This method allowed for simulated mechanical tests (tensile, bending, and torsion) with minimum computational resources for deducing their Young's modulus and shear modulus. The proposed approach also enabled the creation of hypothetical nanotubes to elucidate the relative contributions of bond strength and nanotube structural topology to overall nanotube mechanical strength. Our results indicated that it is the structural topology rather than bond strength that dominates the mechanical properties of the nanotubes. Finally, we investigated the relationship between the structural topology and the mechanical properties by analyzing the von Mises stress distribution in the nanotubes. The proposed methodology proved effective in rationalizing differences in the mechanical properties of AlSiNTs and SWCNTs. Furthermore, this approach could be applied to the exploration of new high-strength nanotube materials.

  16. Microfibrous silver-coated polymeric scaffolds with tunable mechanical properties

    KAUST Repository

    Kalakonda, Parvathalu.

    2017-07-07

    Electrospun scaffolds of poly(glycerol sebacate)/poly(ε-caprolactone) (PGS/PCL) have been used for engineered tissues due to their desirable thermal and mechanical properties as well as their tunable degradability. In this paper, we fabricated micro-fibrous scaffolds from a composite of PGS/PCL using a standard electrospinning method and coated them with silver (Ag). The low temperature coating method prevented substrate melting and the Ag coating decreases the pore size and increases the diameter of fibers which resulted in enhanced thermal and mechanical properties. We further compared the mechanical properties of the composite fibrous scaffolds with different thicknesses of Ag coated scaffolds. The composite fibrous scaffold with a 275 nm Ag coating showed higher tensile modulus (E) and ultimate tensile strength (UTS) without any post-processing treatment. Lastly, potential controlled release of the Ag coating from the composite fibrous scaffolds could present interesting biomedical applications.

  17. [Classification and several mechanical properties of core composite resins].

    Science.gov (United States)

    Yamada, T; Hosoda, H; Tsurugai, T

    1990-03-01

    According to the classification proposed by Hosoda, six core resins could be divided into two categories on the basis of the elemental composition and size distribution of filler particles by SEM observation and EDX analysis. Furthermore, several mechanical properties of the resins were determined. The following facts were found: Bell Feel Core, Clearfil Core, Clearfil PhotoCore, Core Max, and Core Max II resins were classified as a semihybrid resin, and Microrest Core resin as a hybrid type resin. The elements detected in the resins by the EDX were Si, Zr, Al, Ba and La. The mechanical properties of the resins were shown to be highly stable at one day or one week after curing. The mechanical properties of the resins suggest that the subsequent crown preparation and impression taking should be postponed until the next appointment.

  18. Mechanical properties of rice husk flour reinforced epoxy biocomposite

    Directory of Open Access Journals (Sweden)

    Neeraj Bisht

    2015-06-01

    Full Text Available A bio-composite reinforced with rice husk flour in epoxy resin has been developed. The effect of fibre treatment and weight percentage of rice husk on the mechanical properties was studied and compared with wood dust reinforced epoxy composite. It was observed that addition of rice husk as filler is detrimental to almost all the mechanical properties. About 51% and 26.8% decrease in ultimate strength and Young’s Modulus for 40 wt% untreated rice husk reinforcement was observed. The corresponding decrease in flexural strength and flexural modulus was 51%. Similar trend was also observed in hardness and impact strength. However the mechanical properties of rice husk reinforced biocomposites are found to be superior than wood dust reinforced epoxy composite. SEM microscopy was also done to corroborate the results.

  19. Mechanical Properties Of Calcium Carbonate Crystallization Of Chitin Reinforced Polymer

    Directory of Open Access Journals (Sweden)

    Michael Ikpi Ofem

    2015-08-01

    Full Text Available ABSTRACT Chitin whiskers and CaCO3 were reinforced with Polyacrylic acid. Mechanical and thermal properties were characterised. The effect of CaCO3 growth on the mechanical properties of chitin whiskers reinforced Polyacrylic acid indicated that better mechanical properties can be achieved at chitin content of 3 wt when compared with neat PAA. The growth of CaCO3 on CHWPAA composite increased the melting endotherm of CHWPAACaCO3 composite when compared with CHWPAA composite. As an indication of increase in thermal stability the final weight loss at the end of decomposition for all composites was between 20 and 37 far below the 78 for the CHWPAA composite and 84 for the pure PAA .

  20. Pressing Speed, Specific Pressure and Mechanical Properties of Aluminium Cast

    Directory of Open Access Journals (Sweden)

    Gaspar S.

    2016-06-01

    Full Text Available Recent research in the process of aluminum alloy die castings production, which is nowadays deeply implemented into the rapidly growing automobile, shipping and aircraft industries, is aimed at increasing the useful qualitative properties of the die casting in order to obtain its high mechanical properties at acceptable economic cost. Problem of technological factors of high pressure die casting has been a subject of worldwide research (EU, US, Japan, etc.. The final performance properties of die castings are subjected to a large number of technological factors. The main technological factors of high pressure die casting are as follows: plunger pressing speed, specific (increase pressure, mold temperature as well as alloy temperature. The contribution discusses the impact of the plunger pressing speed and specific (increase pressure on the mechanical properties of the casting aluminum alloy.

  1. Tribological properties and lubricating mechanisms of Cu nanoparticles in lubricant

    Institute of Scientific and Technical Information of China (English)

    YU He-long; XU Yi; SHI Pei-jing; XU Bin-shi; WANG Xiao-li; LIU Qian

    2008-01-01

    Wear and friction properties of surface modified Cu nanoparticles as 50CC oil additive were studied.The effect of temperature on tribological properties of Cu nanoparticles was investigated on a four-ball tester.The morphologies,typical element distribution and chemical states of the worn surfaces were characterized by SEM,EDS and XPS,respectively.In order to further investigate the tribological mechanism of Cu nanoparticles,a nano-indentation tester was utilized to measure the micro mechanical Properties of the worn surface.The results indicate that the higher me oil temperature applied,the better the tribological properties of Cu nanoparticles are.It can be inferred that a thin copper protective film with lower elastic modulus and hardness is formed on the wom surface,which results in the good tribological performances of Cu nanoparticles,especially when the Oil temperature is higher.

  2. Microstructure engineering from metallic powder blends for enhanced mechanical properties

    Science.gov (United States)

    Langlois, P.; Fagnon, N.; Dirras, G.

    2010-07-01

    The present work focuses on the transformation of high-purity Ni powder blends of controlled volume fractions (40 and 60 %) of nanometre-sized (100 nm) and micrometre-sized (544 nm) particles into bulk samples as part of a strategy for producing ultrafine-grained materials usefully exhibiting both strength and ductility. The process involved cold isostatic pressing at 1.5 GPa and sintering. The resulting bulk samples had relative densities near 95 %, were texture-free, and exhibited two different grain size distributions with an average value of 600 ± 30 nm. The mechanical properties were investigated by compression and microhardness tests, both at room temperature, and compared to the behaviour of a sample processed from micrometre-sized powder only. Samples prepared from the blends exhibited high yield stresses of 440 and 550 MPa after compression, and they did sustain work hardening. Tests conducted before and after compression up to 50 % deformation showed the same relative amount of hardness increase around 20 %, which was three times lower than that of the monolithic sample for which a decrease of the average grain size close to 26 % was measured.

  3. Microstructure engineering from metallic powder blends for enhanced mechanical properties

    Energy Technology Data Exchange (ETDEWEB)

    Langlois, P; Fagnon, N [LIMHP, Universite Paris 13, CNRS, Institut Galilee, 99 av. J.-B. Clement, 93430 Villetaneuse (France); Dirras, G, E-mail: dirras@univ-paris13.f [LPMTM, Universite Paris 13, CNRS, Institut Galilee, 99 av. J.-B. Clement, 93430 Villetaneuse (France)

    2010-07-01

    The present work focuses on the transformation of high-purity Ni powder blends of controlled volume fractions (40 and 60 %) of nanometre-sized (100 nm) and micrometre-sized (544 nm) particles into bulk samples as part of a strategy for producing ultrafine-grained materials usefully exhibiting both strength and ductility. The process involved cold isostatic pressing at 1.5 GPa and sintering. The resulting bulk samples had relative densities near 95 %, were texture-free, and exhibited two different grain size distributions with an average value of 600 {+-} 30 nm. The mechanical properties were investigated by compression and microhardness tests, both at room temperature, and compared to the behaviour of a sample processed from micrometre-sized powder only. Samples prepared from the blends exhibited high yield stresses of 440 and 550 MPa after compression, and they did sustain work hardening. Tests conducted before and after compression up to 50 % deformation showed the same relative amount of hardness increase around 20 %, which was three times lower than that of the monolithic sample for which a decrease of the average grain size close to 26 % was measured.

  4. Structure–mechanics property relationship of waste derived biochars

    Energy Technology Data Exchange (ETDEWEB)

    Das, Oisik, E-mail: odas566@aucklanduni.ac.nz [Department of Civil and Environmental Engineering, University of Auckland, Auckland 1142 (New Zealand); Sarmah, Ajit K., E-mail: a.sarmah@auckland.ac.nz [Department of Civil and Environmental Engineering, University of Auckland, Auckland 1142 (New Zealand); Bhattacharyya, Debes, E-mail: d.bhattacharyya@auckland.ac.nz [Department of Mechanical Engineering, Center for Advanced Composite Materials, University of Auckland, Auckland 1142 (New Zealand)

    2015-12-15

    The widespread applications of biochar in agriculture and environmental remediation made the scientific community ignore its mechanical properties. Hence, to examine the scope of biochar's structural applications, its mechanical properties have been investigated in this paper through nanoindentation technique. Seven waste derived biochars, made under different pyrolysis conditions and from diverse feedstocks, were studied via nanoindentation, infrared spectroscopy, X–ray crystallography, thermogravimetry, and electron microscopy. Following this, an attempt was made to correlate the biochars' hardness/modulus with reaction conditions and their chemical properties. The pine wood biochar made at 900 °C and 60 min residence time was found to have the highest hardness and elastic modulus of 4.29 and 25.01 GPa, respectively. It was shown that a combination of higher heat treatment (≥ 500 °C) temperature and longer residence time (~ 60 min) increases the values of hardness and modulus. It was further realized that pyrolysis temperature was a more dominant factor than residence time in determining the final mechanical properties of biochar particles. The degree of aromaticity and crystallinity of the biochar were also correlated with higher values of hardness and modulus. - Highlights: • Characterization was done on waste based biochars which included nanoindentation. • Pine saw dust biochar made at 900 °C for 60 min had highest hardness/modulus. • Combination of temperature/residence time affect biochar's mechanical propertie.s • Aromaticity and crystallinity positively affected biochar's mechanical properties.

  5. Cryogenic mechanical property testing system directly cooled by G-M cryocooler

    Science.gov (United States)

    Huang, R. J.; Liu, Q.; Li, L. F.; Gong, L. H.; Liu, H. M.; Xu, D.

    2014-01-01

    Cryogenic mechanical properties are generally considered to be some of the most important parameters in cryogenic engineering. Therefore, it is very important to test and investigate mechanical properties at low temperatures. Most systems for cryogenic mechanical property testing are cooled using liquid nitrogen (300 K-77 K) or liquid helium (77 K-4.2 K). As we know, liquid helium is relatively rare and thus expensive. In this study, to attain accurate and stable intermediate temperatures and reduce testing cost, a cryogenic mechanical property testing system cooled by a G-M cryocooler was studied and developed. In this system, the sample can be cooled down to 10.5 K after about 10 hours of running. The tension, bending and compression testing (load range up to 50 kN) can be carried out.

  6. Mechanical properties of various two-dimensional silicon carbide sheets: An atomistic study

    Science.gov (United States)

    Nguyen, Danh-Truong; Le, Minh-Quy

    2016-10-01

    We investigate through molecular dynamics finite element method with Tersoff potential the mechanical properties of 13 SimCn sheets under uniaxial tension in the armchair and zigzag directions. It is found that the presence and dispersion of silicon atoms in SimCn sheets affect strongly the mechanical properties and the anisotropy of these sheets. The Young's modulus and fracture stress of the SimCn sheet decrease in general when the silicon concentration increases from 0 to 0.2. In contrast, the mechanical properties (Young's modulus, fracture stress, and fracture strain) increase slightly when the silicon concentration increases from 0.3 to 0.5 due to an increase of the degree of dispersion of silicon atoms in the SimCn sheet. The mechanical properties of the sheet are relatively high when the silicon concentration is low or silicon atoms are well dispersed.

  7. A comparative study on the synthesis mechanism, bioactivity and mechanical properties of three silicate bioceramics.

    Science.gov (United States)

    Najafinezhad, Aliakbar; Abdellahi, Majid; Ghayour, Hamid; Soheily, Ali; Chami, Akbar; Khandan, Amirsalar

    2017-03-01

    In the present study three akermanite (Ca2MgSi2O7), diopside (CaMgSi2O6) and baghdadite (Ca3ZrSi2O9) applicable bioceramics were synthesized via a sol-gel based method. The combination of sol-gel method and the raw materials used in this study presents a new route for the synthesis of the mentioned bioceramics. By the use of thermal analysis, the mechanisms occurred during the synthesis of these bioceramics were investigated. The differences in the structural density and their relation with the degradation rate and mechanical properties of all three ceramics were studied. In vitro bioactivity and apatite formation mechanisms of the samples soaked in the simulated body fluid were considered. The results showed that baghdadite as a Zr-containing material has a more dense structure in comparison with the other ceramics, which leads to a lower degradation rate and also lower bioactivity. There were also main differences between akermanite and diopside as Mg-containing ceramics. Diopside showed a structure with lower porosity content compared to the akermanite samples which resulted in the lower degradation rate and higher compressive strength. Copyright © 2016 Elsevier B.V. All rights reserved.

  8. Characterization of some physicist, mechanics and chemistries properties in the banana (Musa spp.)

    OpenAIRE

    Carlos Modesto Martínez Hernández; Tania de la Caridad Bermúdez Camacho

    2016-01-01

    The present work approaches the study of some physical-mechanical and chemical properties of the banana (Musa spp.). For its investigation, they took samples in the Municipal Company of Cultivos Varios, municipality Taguasco, provinces of Sancti-Spíritus. They were carried out rehearsals related to some physical, mechanical and chemical variables as: pH, oBrix, total regular acids, static coefficients of friction and mechanical impact damages deal with the established norms. The objective of ...

  9. Physical and mechanical properties of nanoreinforced particleboard composites

    OpenAIRE

    Candan,Zeki; AKBULUT, Turgay

    2015-01-01

    Novel composite materials having desired performance properties can be developed by nanotechnology. The major objective of this research was to produce nanomaterial- reinforced particleboard composites with enhanced physical and mechanical performance. Urea formaldehyde adhesive used to produce particleboard composites was reinforced with nanoSiO2, nanoAl2O3, and nanoZnO at loading level of 0%, 1%, and 3%. To evaluate physical properties density, thickness swelling, water absorption, and equi...

  10. Mechanical properties of micron and nanodimentional metal films

    Directory of Open Access Journals (Sweden)

    I.Yu. Protsenko

    2010-01-01

    Full Text Available The mechanical and strain resistivity properties data for bulk condensates and nanodimentional films at the elastic and plastic deformation was analyzed. The experimental results of strain resistivity properties of one-layer (Fe, Cr, Pd and Pt and two-layer (Fe/Cr, Cu/Cr and Pd/Fe films, in particular, dependence of the deformation at the transition from elastic to plastic deformation from thickness was presented.

  11. The effect of composition on mechanical properties of brushite cements.

    Science.gov (United States)

    Engstrand, Johanna; Persson, Cecilia; Engqvist, Håkan

    2014-01-01

    Due to a fast setting reaction, good biological properties, and easily available starting materials, there has been extensive research within the field of brushite cements as bone replacing material. However, the fast setting of brushite cement gives them intrinsically low mechanical properties due to the poor crystal compaction during setting. To improve this, many additives such as citric acid, pyrophosphates, and glycolic acid have been added to the cement paste to retard the crystal growth. Furthermore, the incorporation of a filler material could improve the mechanical properties when used in the correct amounts. In this study, the effect of the addition of the two retardants, disodium dihydrogen pyrophosphate and citric acid, together with the addition of β-TCP filler particles, on the mechanical properties of a brushite cement was investigated. The results showed that the addition of low amounts of a filler (up to 10%) can have large effects on the mechanical properties. Furthermore, the addition of citric acid to the liquid phase makes it possible to use lower liquid-to-powder ratios (L/P), which strongly affects the strength of the cements. The maximal compressive strength (41.8MPa) was found for a composition with a molar ratio of 45:55 between monocalcium phosphate monohydrate and beta-tricalcium phosphate, an L/P of 0.25ml/g and a citric acid concentration of 0.5M in the liquid phase.

  12. Mechanical properties of natural fibre reinforced polymer composites

    Indian Academy of Sciences (India)

    A S Singha; Vijay Kumar Thakur

    2008-10-01

    During the last few years, natural fibres have received much more attention than ever before from the research community all over the world. These natural fibres offer a number of advantages over traditional synthetic fibres. In the present communication, a study on the synthesis and mechanical properties of new series of green composites involving Hibiscus sabdariffa fibre as a reinforcing material in urea–formaldehyde (UF) resin based polymer matrix has been reported. Static mechanical properties of randomly oriented intimately mixed Hibiscus sabdariffa fibre reinforced polymer composites such as tensile, compressive and wear properties were investigated as a function of fibre loading. Initially urea–formaldehyde resin prepared was subjected to evaluation of its optimum mechanical properties. Then reinforcing of the resin with Hibiscus sabdariffa fibre was accomplished in three different forms: particle size, short fibre and long fibre by employing optimized resin. Present work reveals that mechanical properties such as tensile strength, compressive strength and wear resistance etc of the urea–formaldehyde resin increases to considerable extent when reinforced with the fibre. Thermal (TGA/DTA/DTG) and morphological studies (SEM) of the resin and biocomposites have also been carried out.

  13. Investigation of mechanical properties of cryogenically treated music wire

    Science.gov (United States)

    Heptonstall, A.; Waller, M.; Robertson, N. A.

    2015-08-01

    It has been reported that treating music wire (high carbon steel wire) by cooling to cryogenic temperatures can enhance its mechanical properties with particular reference to those properties important for musical performance. We use such wire for suspending many of the optics in Advanced LIGO, the upgrade to LIGO—the Laser Interferometric Gravitational-Wave Observatory. Two properties that particularly interest us are mechanical loss and breaking strength. A decrease in mechanical loss would directly reduce the thermal noise associated with the suspension, thus enhancing the noise performance of mirror suspensions within the detector. An increase in strength could allow thinner wire to be safely used, which would enhance the dilution factor of the suspension, again leading to lower suspension thermal noise. In this article, we describe the results of an investigation into some of the mechanical properties of music wire, comparing untreated wire with the same wire which has been cryogenically treated. For the samples we studied, we conclude that there is no significant difference in the properties of interest for application in gravitational wave detectors.

  14. The mechanism and properties of acid-coagulated milk gels

    Directory of Open Access Journals (Sweden)

    Chanokphat Phadungath

    2005-03-01

    Full Text Available Acid-coagulated milk products such as fresh acid-coagulated cheese varieties and yogurt areimportant dairy food products. However, little is known regarding the mechanisms involved in gel formation, physical properties of acid gels, and the effects of processing variables such as heat treatment and gelation temperature on the important physical properties of acid milk gels. This paper reviews the modern concepts of possible mechanisms involved in the formation of particle milk gel aggregation, along with recent developments including the use of techniques such as dynamic low amplitude oscillatory rheology to observe the gel formation process, and confocal laser scanning microscopy to monitor gel microstructure.

  15. Structures and Mechanical Properties of PVC/Na+- Montmorillonite Nanocomposites

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Poly (vinyl chloride)/Na+-montmorillonite (PVC/MMT) nanocomposites with different MMT contents were prepared via melt blending. Wide-angle X-ray diffraction (WAXD) and transmission electron microscopy (TEM) were used to characterize the structures. Effects of MMT content on the mechanical properties were also studied. It is found that PVC molecular chains can intercalate into the gallery of MMT layers during melt blending process, the stiffness and toughness of the composites are improved simultaneously within 0.5~7wt% MMT content, and the transparency and mechanical properties decrease as MMT content further increases.

  16. Computer simulations of the mechanical properties of metals

    DEFF Research Database (Denmark)

    Schiøtz, Jakob; Vegge, Tejs

    1999-01-01

    Atomic-scale computer simulations can be used to gain a better understanding of the mechanical properties of materials. In this paper we demonstrate how this can be done in the case of nanocrystalline copper, and give a brief overview of how simulations may be extended to larger length scales....... Nanocrystline metals are metals with grain sizes in the nanometre range, they have a number of technologically interesting properties such as much increased hardness and yield strength. Our simulations show that the deformation mechanisms are different in these materials than in coarse-grained materials...

  17. The factors influencing microstructure and mechanical properties of ADI

    Directory of Open Access Journals (Sweden)

    A. Vaško

    2009-01-01

    Full Text Available The paper deals with the influence of different conditions of isothermal heat treatment on microstructure and mechanical properties of austempered ductile iron (ADI. Different temperature of isothermal transformation of austenite and different holding time at this temperature were used for heat treatment of specimens. The microstructure of specimens after casting and after heat treatment was evaluated by STN EN ISO 945 and by image analysis (using Lucia software. Mechanical properties were evaluated by the tensile test, the Rockwell hardness test and fatigue tests.

  18. Structural, mechanical and thermodynamic properties of ZrO2 polymorphs by first-principles calculation

    Science.gov (United States)

    Liang, Zuozhong; Wang, Wei; Zhang, Min; Wu, Fei; Chen, Jian-Feng; Xue, Chunyu; Zhao, Hong

    2017-04-01

    The structural, mechanical and thermodynamic properties of ZrO2 polymorphs (namely, monoclinic (P21/c), tetragonal (P42/nmc), cubic (Fm 3 bar m), and orthorhombic (Pbca and Pnma)) are investigated systematically by employing DFT functionals (LDA, PBE and PW91). It is found that the structural parameters of ZrO2 polymorphs calculated by PBE and PW91 functionals are highly consistent with previous experiments with low absolute relative error (ARE). Moreover, all considered structures are mechanically stable according to the Born-Huang criterion and the PBE and PW91 functionals are more accurate than the LDA functional in predicting mechanical and thermodynamic properties. Significantly, we described mechanical and thermodynamic properties of ZrO2 polymorphs by introducing the charge density difference of related surfaces, which provides a better understanding of different behaviors of elastic constants (Cij) in various crystal structures of ZrO2.

  19. The role of focal adhesion kinase in the regulation of cellular mechanical properties

    Science.gov (United States)

    Mierke, Claudia Tanja

    2013-12-01

    The regulation of mechanical properties is necessary for cell invasion into connective tissue or intra- and extravasation through the endothelium of blood or lymph vessels. Cell invasion is important for the regulation of many healthy processes such as immune response reactions and wound healing. In addition, cell invasion plays a role in disease-related processes such as tumor metastasis and autoimmune responses. Until now the role of focal adhesion kinase (FAK) in regulating mechanical properties of cells and its impact on cell invasion efficiency is still not well known. Thus, this review focuses on mechanical properties regulated by FAK in comparison to the mechano-regulating protein vinculin. Moreover, it points out the connection between cancer cell invasion and metastasis and FAK by showing that FAK regulates cellular mechanical properties required for cellular motility. Furthermore, it sheds light on the indirect interaction of FAK with vinculin by binding to paxillin, which then impairs the binding of paxillin to vinculin. In addition, this review emphasizes whether FAK fulfills regulatory functions similar to vinculin. In particular, it discusses the differences and the similarities between FAK and vinculin in regulating the biomechanical properties of cells. Finally, this paper highlights that both focal adhesion proteins, vinculin and FAK, synergize their functions to regulate the mechanical properties of cells such as stiffness and contractile forces. Subsequently, these mechanical properties determine cellular invasiveness into tissues and provide a source sink for future drug developments to inhibit excessive cell invasion and hence, metastases formation.

  20. Characterization of High Temperature Mechanical Properties Using Laser Ultrasound

    Energy Technology Data Exchange (ETDEWEB)

    David Hurley; Stephen Reese; Farhad Farzbod; Rory Kennedy

    2012-05-01

    Mechanical properties are controlled to a large degree by defect structures such as dislocations and grain boundaries. These microstructural features involve a perturbation of the perfect crystal lattice (i.e. strain fields). Viewed in this context, high frequency strain waves (i.e. ultrasound) provide a natural choice to study microstructure mediated mechanical properties. In this presentation we use laser ultrasound to probe mechanical properties of materials. This approach utilizes lasers to excite and detect ultrasonic waves, and as a consequence has unique advantages over other methods—it is noncontacting, requires no couplant or invasive sample preparation (other than that used in metallurgical analysis), and has the demonstrated capability to probe microstructure on a micron scale. Laser techniques are highly reproducible enabling sophisticated, microstructurally informed data analysis. Since light is being used for generation and detection of the ultrasonic wave, the specimen being examined is not mechanically coupled to the transducer. As a result, laser ultrasound can be carried out remotely, an especially attractive characteristic for in situ measurements in severe environments. Several examples involving laser ultrasound to measure mechanical properties in high temperature environments will be presented. Emphasis will be place on understanding the role of grain microstructure.

  1. Mechanical properties of carbon fiber composites for applications in space

    Science.gov (United States)

    Hana, P.; Inneman, A.; Daniel, V.; Sieger, L.; Petru, M.

    2015-01-01

    This article describes method of measurement mechanical properties of carbon fiber composites in space. New material structures are specifically designed for use on space satellites. Composite structures will be exposed to cosmic radiation in Earth orbit on board of a '2U CubeSat' satellite. Piezoelectric ceramic sensors are used for detection mechanical vibrations of composite test strip. A great deal of attention is paid to signal processing using 8-bit microcontroler. Fast Fourier Transformation is used. Fundamental harmonic frequencies and damping from on-board measurements will serve as the input data for terrestrial data processing. The other step of elaboration data is creation of the physical model for evaluating mechanical properties of Carbon composite - Piezoelectric ceramic system. Evaluation of anisotropic mechanical properties of piezoelectric ceramics is an interesting secondary outcome of the investigation. Extreme changes in temperature and the effect of cosmic rays will affect the mechanical properties and durability of the material used for the external construction of satellites. Comparative terrestrial measurements will be performed.

  2. Physical and mechanical properties of Tunisian women hair.

    Science.gov (United States)

    Sayahi, E; Harizi, T; Msahli, S; Sakli, F

    2016-10-01

    Mechanical analysis of human hair may provide the dermatologists with several markers of considerable diagnostic importance. The aim of this study was to analyse the physical and mechanical properties of Tunisian women's hair. Surface characteristics were determined with scanning electron microscopy (SEM). Mechanical properties were studied using the Miniature Tensile Tester Model 675 (MTT675), and the Fibre Dimensional Analysis Unit Model 765 (FDAS765) of Dia-Stron, UK, was used to measure the cross-sectional area. The cross-sectional area, stress at break, strain at break, elastic modulus and total work were 4643.21 ± 817 μm(2) , 201 ± 11.26 MPa, 47.3 ± 3.6%, 3.1 ± 0.16 GPa, and 9 ± 2.2 mJ, respectively. The effects of the factors 'hair curliness' and 'age' on the physical and mechanical properties were studied. The cross-sectional area and the break load are influenced by the factors 'age' and 'curl type', whereas Young's modulus shows a significant dependency only on the age. Tunisian women hair presented good mechanical properties as shown by a greater breaking stress and higher breaking strain. Both curl type and age are important factors to consider when evaluating the behaviour of hair. © 2016 Society of Cosmetic Scientists and the Société Française de Cosmétologie.

  3. Influence of Moisture on Mechanical Properties of Cellulose Insulation Paper

    Science.gov (United States)

    Wang, Y. Y.; Tian, M.; Xu, H. X.; Fan, P.

    2014-01-01

    This paper aims to investigate the impact of moisture on mechanical properties of insulation paper. According to the molecular modeling approach proposed by Theodorou, the amorphous cellulose models of insulation paper with different moisture contents were built up to calculate mechanical parameters and hydrogen bond networks. And relevant conclusions could be drawn through further analysis on these calculation results: water molecules can destroy hydrogen bond network between the neighboring cellulose molecules, which might be responsible for the significant decrease of Young's modulus and other mechanical parameters, while no appreciable effect of intramolecular hydrogen bonds on mechanical properties was detected. Thus tensile tests were also carried out to study the moisture influence on the Young's modulus, by which the result of the simulation was approved.

  4. Role of mismatch in mechanical properties in cancer cell migration

    Science.gov (United States)

    Butcher, Julian; Das, Moumita

    2014-03-01

    Recent experiments suggest that the mechanical stiffness of cells and their interaction with their surroundings undergo remarkable changes during tumor progression. An intriguing experimental result in this area suggests that the mismatch in the elasticity and adhesive properties between cancer cells and cells that have not yet transformed may lead to enhanced cancer cell motility in a binary cell population. Motivated by this, we study the mechanical response and dynamics of a binary system of active and deformable particles using Langevin Dynamics simulations. We characterize their motility by studying particle trajectories, mean square displacements and correlation functions. Our study may provide an understanding of the interplay of mechanical and statistical mechanical properties underlying the enhanced motility of cancer cells during metastasis. This work was partially supported by a D-RIG grant from the College of Science at Rochester Institute of Technology.

  5. Mechanics of extended masses in general relativity

    CERN Document Server

    Harte, Abraham I

    2011-01-01

    The "external" or "bulk" motion of extended bodies is studied in general relativity. Material objects of arbitrary shape, spin, internal composition, and velocity are allowed as long as the metric remains near a vacuum solution (with a possible cosmological constant). Under this restriction, physically reasonable linear and angular momenta are proposed that evolve as though they were the momenta of an extended test body moving in an effective vacuum metric. This result holds to all multipole orders. The portion of the physical metric that does not directly affect the motion is a slightly generalized form of the Detweiler-Whiting S-field originally introduced in the context of self-force. This serves only to (finitely) renormalize the "bare" multipole moments of the object's stress-energy tensor. The MiSaTaQu expression for the gravitational self-force is recovered as a simple application. A gravitational self-torque is obtained as well. Lastly, a certain exact result is derived that may provide a basis for un...

  6. Effect of entanglements on mechanical properties of glassy polymers

    Science.gov (United States)

    Hoy, Robert Scott

    Glass forming polymers are of great industrial importance and scientific interest because of their unique mechanical properties, which arise from the connectivity and random-walk-like structure of the constituent chains. In this thesis I study the relation of entanglements to the mechanical properties of model polymer glasses and brushes using molecular dynamics simulations. We perform extensive studies of glassy strain hardening, which stabilizes polymers against strain localization and fracture. Fundamental inconsistencies in existing entropic models of strain hardening imply that our understanding of its microscopic origins is far from complete. The dependence of stress on strain and entanglement density is consistent with experiment and entropic models. However, many of the assumptions of these models are totally inconsistent with our simulation results. The dependence on temperature, rate and interaction strength can be understood as reflecting changes in the plastic flow stress rather than a network entropy. A substantial energetic contribution to the stress rises rapidly as segments between entanglements are pulled taut. The thermal component of stress is less sensitive to entanglements, mostly irreversible, and directly related to the rate of local plastic arrangements. The deformation of the entanglement network is not affine to the macroscopic stretch. Entangled and unentangled chains show the same strain hardening when plotted against the microscopic chain orientation rather than the macroscopic strain. The entropic back stress responsible for shape recovery arises from chain orientation rather than entanglement. We also present some other results unrelated to strain hardening. We analyze the entanglement of polymer brushes embedded in long-chain melts and in implicit good and theta solvents. The melt-embedded brushes are more self-entangled than those in the solvents. The degree of self-entanglement of the brushes in the solvents follows a simple

  7. Can percolation model describe the evolution of mechanical properties of compacts of binary systems?

    Science.gov (United States)

    Evesque, Pierre; Busignies, Virginie; Porion, Patrice; Leclerc, Bernard; Tchoreloff, Pierre

    2009-06-01

    In pharmaceutical field, the percolation theory is used to describe the change of tablet's properties with the relative density. It defines critical tablet densities from which the mechanical properties start to change. The exponent in the law is expected to be universal for a mechanical property and numerical values are proposed in the literature. In this work, the percolation model was applied to the tensile strength and the reduced modulus of elasticity of three compacted pharmaceutical excipients. This work showed that the exponent seems not universal and that the model must be used carefully.

  8. Effect of quenching techniques on the mechanical properties of low carbon structural steel

    Directory of Open Access Journals (Sweden)

    K. Miernik

    2010-07-01

    Full Text Available The paper presents the results of the impact of incomplete quenching technique on the mechanical properties of low carbon structural steel.Significant influence of the heating method to the α + γ field was observed on the strength and plasticity after hardening process. The best combination of mechanical properties was obtained for the 3th technique consisting of pre-heating the material to the austenite field, next cooling to the appropriate temperature in the α + γ and hardening from that dual phase region. The high level of toughness with relatively high strength were observed, compared to the properties obtained for the two other ways to quench annealing (incomplete hardening.

  9. Mechanical Properties Prediction of the Mechanical Clinching Joints Based on Genetic Algorithm and BP Neural Network

    Institute of Scientific and Technical Information of China (English)

    LONG Jiangqi; LAN Fengchong; CHEN Jiqing; YU Ping

    2009-01-01

    For optimal design of mechanical clinching steel-aluminum joints, the back propagation (BP) neural network is used to research the mapping relationship between joining technique parameters including sheet thickness, sheet hardness, joint bottom diameter etc., and mechanical properties of shearing and peeling in order to investigate joining technology between various material plates in the steel-aluminum hybrid structure car body. Genetic algorithm (GA) is adopted to optimize the back-propagation neural network connection weights. The training and validating samples are made by the BTM(R) Tog-L-Loc system with different technologic parameters. The training samples' parameters and the corresponding joints' mechanical properties are supplied to the artificial neural network (ANN) for training. The validating samples' experimental data is used for checking up the prediction outputs. The calculation results show that GA can improve the model's prediction precision and generalization ability of BP neural network. The comparative analysis between the experimental data and the prediction outputs shows that ANN prediction models after training can effectively predict the mechanical properties of mechanical clinching joints and prove the feasibility and reliability of the intelligent neural networks system when used in the mechanical properties prediction of mechanical clinching joints. The prediction results can be used for a reference in the design of mechanical clinching steel-aluminum joints.

  10. COMPUTER NUMERICAL SIMULATION OF MECHANICAL PROPERTIES OF TUNGSTEN HEAVY ALLOYS

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    A microstructure model of tungsten heavy alloys has been developed. On the basis of the model and several assumptions, the macro-mechanical properties of 90 W heavy alloy under quasi-static tensile deformation and the effects of microstructural parameters (mechanical properties of the matrix phase and tungsten content) on them have been analyzed by computer numerical simulation. The mechanical properties of the alloy have been found to be dependent on the mechanical parameters of the matrix phase. As the elastic modulus and yield strength of the matrix phase increase, the tensile strength of the alloy increases, while the elongation decreases. If the mechanical parameters except the tensile strength of the matrix phase are constant, both the tensile strength and the elongation of the alloy increase linearly with the increase of tensile strength of the matrix phase. The properties of the alloy are very sensitive to the hardening modulus of the matrix phase. As the hardening modulus increases, both the tensile strength and the elongation of the alloy exponentially decrease. The elongation of the alloys monotonically decreases with the increase of tungsten content, while the decrease of tensile strength is not monotonic. When the tungsten content < 85 %, the strength of tungsten heavy alloys increases with the increase of tungsten content, while decreases when the tungsten content >85 %. The maximum of tensile strength of the alloys appears at the tungsten content of 85 %. The results showed that the binder phase with a higher strength and a lower hardening modulus is advantageous to obtaining an optimum combination of mechanical properties of tungsten heavy alloys.

  11. Selective laser melting of titanium alloy: investigation of mechanical properties and microstructure

    Science.gov (United States)

    Agapovichev, A. V.; Kokareva, V. V.; Smelov, V. G.; Sotov, A. V.

    2016-11-01

    This article presents the mechanical properties and microstructure of titanium alloy after selective laser melting (SLM). Titanium alloys are ideal material for selective laser melting (SLM), because they are expensive and difficult to machinery using traditional technologies. The application of SLM in the biomedical area has been slow due to the stringent performance criteria and concerns related to personification and part quality. In this article we focused on the manufacture by SLM and determination of microstructure and mechanical properties of titanium alloy (Ti Grade 2 Powder) using tensile tests and X-ray diffraction. The results reveal that the alloy exhibits a pronounced the homogeneous microstructure and high mechanical strength.

  12. Microstructures and Mechanical Properties of Fe-Mn-(Al, Si) TRIP/TWIP Steels

    Institute of Scientific and Technical Information of China (English)

    DING Hua; TANG Zheng-You; LI Wei; WANG Mei; SONG Dan

    2006-01-01

    The mechanical properties and microstructure of two low carbon high manganese steels with 23.8% (No.1) and 33% (No.2) (mass percent) of manganese were investigated. The results showed that No.1 steel possesses high strength and high plasticity, and No.2 steel has a relatively high strength and extraordinary plasticity. The No.1 steel exhibits both TRIP (transformation induced plasticity) and TWIP (twin induced plasticity) effects during the deformation; while only TWIP effect appeared under the same deformation condition for No.2 steel. The comparison between the microstructures and mechanical properties of two steels was made, and the strengthening mechanisms were also analyzed.

  13. Mechanical properties of tricalcium phosphate-alumina composites

    Science.gov (United States)

    Sakka, S.; Ben Ayed, F.; Bouaziz, J.

    2012-02-01

    Tricalcium phosphate and alumina powder were mixed in order to elaborate biphasic ceramics composites. This study deals to produce bioceramics composites sintered at various temperatures for differents times. The characterization of samples, before and after the sintering process was investigated, using X-Ray diffraction, scanning electronic microscopy, 31P and 27Al nuclear magnetic resonance and differential thermal analysis. Mechanical properties of biphasic composites were studied using Brazilian test. The tricalcium phosphate - 75 wt% alumina composites mechanical resistance increased with sintered temperature. The mechanical resistance reach it's optimum value (8.6 MPa) at 1550°C for two hours.

  14. Comparative Study on Mechanical Properties between Pure and Recycled Polypropylenes

    Directory of Open Access Journals (Sweden)

    Ariadne L. Juwono

    2010-04-01

    Full Text Available Polypropylene (PP is one type of thermoplastics that is widely used in our daily activities. A combination of the high demand and the easiness of recycling process, the recycled PP has been generally applied. In this study, the structure and the mechanical properties of the as-received PPs, recycled PPs, and commercial recycled PPs were compared, especially for cloth hanger application. DSC test results showed that recycling process did not cause a significant change to the material's melting point, which stayed in a range of 160-163 oC. Meanwhile, FTIR test results showed that the commercial recycled PPs contained of Polyethylene (PE, which was not found in the as-received and the recycled PPs. Tensile and hardness tests demonstrated that there were no significant differences between the as-received and recycled PPs. In contrast, tensile test results of the commercial recycled PPs showed that the tensile strength, Young modulus and strain-at-break were lower than those of the as-received PPs by 22.1%, 8.1% and 65.7% respectively. The hardness test results of the commercial recycled PPs showed that the recycling process had a little effect on the material's hardness. These facts were supported by SEM observation on the surface that the contour of the commercial recycled PPs was relatively flatter and had smaller grain size than those of the as-received PPs. This indicated that the commercial recycled PPs were more brittle compared to the recycled PPs. To conclude, the recycled PPs have similar properties to the as-received PPs so that recycled PPs are suitable to be applied as cloth hanger application.

  15. Extrinsic Mechanisms Involved in Age-Related Defective Bone Formation

    DEFF Research Database (Denmark)

    Trinquier, Anne Marie-Pierre Emilie; Kassem, Moustapha

    2011-01-01

    the mechanisms involved in the age-related defective bone formation. Evidence Acquisition: The mechanisms discussed in this review are based on a PubMed search and knowledge of the authors in the field. Evidence Synthesis: Available basic and clinical studies indicate that multiple mechanisms are involved...

  16. Interspecific comparison of the mechanical properties of mussel byssus.

    Science.gov (United States)

    Brazee, Shanna L; Carrington, Emily

    2006-12-01

    Byssally tethered mussels are found in a variety of habitats, including rocky intertidal, salt marsh, subtidal, and hydrothermal vents. One key to the survival of mussels in these communities is a secure attachment, achieved by the production of byssal threads. Although many studies have detailed the unique biomechanical properties of byssal threads, only a few prevalent species have been examined. This study assesses the variation in the mechanical properties of byssus in a broad range of mussel species from diverse environments, including intertidal and subtidal Mytilus edulis, Modiolus modiolus, Geukensia demissa, Bathymodiolus thermophilus, and Dreissena polymorpha. A tensometer was used to measure quasi-static and dynamic mechanical properties of individual threads, and several aspects of morphology were quantified. The results indicate that thread mechanical properties vary among mussel species, and several novel properties were observed. For example, of the species examined, D. polymorpha threads were the strongest, stiffest, least resilient, and fastest to recover after partial deformation. Threads of M. modiolus were characterized by the presence of two distinct yield regions prior to tensile failure. This comparative study not only provides insight into the ecological limitations and evolution of mussels, but also suggests new models for the design of novel biomimetic polymers.

  17. Mechanical properties of titanium alloys with strengthened surface layers

    Directory of Open Access Journals (Sweden)

    I.M. Pohreliuk

    2011-12-01

    Full Text Available Influence of oxinitriding and boriding on the mechanical properties (ultimate strength to destruction at uniaxial tension, plasticity, tendency to delayed destruction, fatigue resistance at bending with rotation, fatigue life at lowcycle pure bending of titanium alloys is studied.

  18. THE RHEOLOGICAL PROPERTIES AND OUTBURST MECHANISM OF GASEOUS COAL

    Institute of Scientific and Technical Information of China (English)

    何学秋; 周世宁; 林柏泉

    1991-01-01

    Coal and methane outburst is one of the harmful disasters in coal mines. We have studied the rheological properties of gaseous coal in laboratory and obtained its rheological fracture principle. This principle can better explain and describe the outburst mechanism of gaseous coal. Thereby a rheological hypothesis of coal and methane outburst is put forward in this paper.

  19. assessment of some mechanical properties and microstructure of ...

    African Journals Online (AJOL)

    user

    the composites and those of the aluminium 6063 (AA6063) alloy. ... Key words: Composites, Periwinkle shell, Aluminum, Mechanical properties, Microstructure. 1. .... In this work, we evaluated the effect of particle size and ... Zr. V. Ca. Be. Average content. 0.0347. 0.0566. ... micro structural study. 3.

  20. Mechanical Properties, Purifying Techniques and Processing Methods of Metal Yttrium

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The mechanical properties of metal yttrium such as strength, plasticity, hardness and elasticity were introduced. The purifying techniques of yttrium were discussed in detail. The processing methods for metal yttrium including extruding, forging, rolling, wiredrawing and welding were also introduced. Finally, the potential use of yttrium and its alloys were prospected.

  1. IMPACT OF OIL ON THE MECHANICAL PROPERTIES OF SOIL SUBSIDENCE

    Directory of Open Access Journals (Sweden)

    Алексей Алексеевич Бурцев

    2016-08-01

    Full Text Available The paper studied the effect of oil content on the mechanical properties of soil subsidence - Ek modulus and compressibility factor m0, obtained in the laboratory with the help of artificial impregnation oil soil samples. A comparison of the above parameters with samples of the same soil in the natural and water-saturated conditions has been perfomed.

  2. Mechanical properties of porous, electrosprayed calcium phosphate coatings

    NARCIS (Netherlands)

    Leeuwenburgh, S.C.G.; Wolke, J.G.C.; Lommen, L.; Pooters, T.; Schoonman, J.; Jansen, J.A.

    2006-01-01

    Mechanical properties of calcium phosphate coatings (CaP), deposited using the electrostatic spray deposition (ESD) technique, have been characterized using a range of analytical techniques, including tensile testing (ASTM C633), fatigue testing (ASTM E855), and scratch testing using blunt and sharp

  3. Mechanical properties of short doughs and their corresponding biscuits.

    NARCIS (Netherlands)

    Baltsavias, A.

    1996-01-01

    The mechanical properties of short doughs of various composition were determined in small amplitude oscillatory experiments and in uniaxial compression. Regardless of composition, the linear region was very limited; beyond that, pronounced yielding and flow occurred. Conductimetry was also used to e

  4. Mechanical properties of hyaline and repair cartilage studied by nanoindentation.

    Science.gov (United States)

    Franke, O; Durst, K; Maier, V; Göken, M; Birkholz, T; Schneider, H; Hennig, F; Gelse, K

    2007-11-01

    Articular cartilage is a highly organized tissue that is well adapted to the functional demands in joints but difficult to replicate via tissue engineering or regeneration. Its viscoelastic properties allow cartilage to adapt to both slow and rapid mechanical loading. Several cartilage repair strategies that aim to restore tissue and protect it from further degeneration have been introduced. The key to their success is the quality of the newly formed tissue. In this study, periosteal cells loaded on a scaffold were used to repair large partial-thickness cartilage defects in the knee joint of miniature pigs. The repair cartilage was analyzed 26 weeks after surgery and compared both morphologically and mechanically with healthy hyaline cartilage. Contact stiffness, reduced modulus and hardness as key mechanical properties were examined in vitro by nanoindentation in phosphate-buffered saline at room temperature. In addition, the influence of tissue fixation with paraformaldehyde on the biomechanical properties was investigated. Although the repair process resulted in the formation of a stable fibrocartilaginous tissue, its contact stiffness was lower than that of hyaline cartilage by a factor of 10. Fixation with paraformaldehyde significantly increased the stiffness of cartilaginous tissue by one order of magnitude, and therefore, should not be used when studying biomechanical properties of cartilage. Our study suggests a sensitive method for measuring the contact stiffness of articular cartilage and demonstrates the importance of mechanical analysis for proper evaluation of the success of cartilage repair strategies.

  5. effects of sulphur addition on addition on and mechanical properties ...

    African Journals Online (AJOL)

    User

    on the microstructure and mechanical properties of sand cast been investigated in this .... Cu. Zn. Mn. Mg. Cr. B. 99.71. 0.045. -. 0.230. 0.002. 0.006. 0.001. 0.001. 0.001. 0.004 ..... Iron & Steel Making, MIR Publishers, Moscow,. 39. 1983. 40. 41.

  6. Switchable antimicrobial and antifouling hydrogels with enhanced mechanical properties.

    Science.gov (United States)

    Cao, Bin; Tang, Qiong; Li, Linlin; Humble, Jayson; Wu, Haiyan; Liu, Lingyun; Cheng, Gang

    2013-08-01

    New switchable hydrogels are developed. Under acidic conditions, hydrogels undergo self-cyclization and can catch and kill bacteria. Under neutral/basic conditions, hydrogels undergo ring-opening and can release killed bacterial cells and resist protein adsorption and bacterial attachment. Smart hydrogels also show a dramatically improved mechanical property, which is highly desired for biomedical applications.

  7. Sterilizing elastomeric chains without losing mechanical properties. Is it possible?

    Science.gov (United States)

    Pithon, Matheus Melo; Ferraz, Caio Souza; Rosa, Francine Cristina Silva; Rosa, Luciano Pereira

    2015-01-01

    OBJECTIVE: To investigate the effects of different sterilization/disinfection methods on the mechanical properties of orthodontic elastomeric chains. METHODS: Segments of elastomeric chains with 5 links each were sent for sterilization by cobalt 60 (Co60) (20 KGy) gamma ray technology. After the procedure, the elastomeric chains were contaminated with clinical samples of Streptococcus mutans. Subsequently, the elastomeric chains were submitted to sterilization/disinfection tests carried out by means of different methods, forming six study groups, as follows: Group 1 (control - without contamination), Group 2 (70°GL alcohol), Group 3 (autoclave), Group 4 (ultraviolet), Group 5 (peracetic acid) and Group 6 (glutaraldehyde). After sterilization/disinfection, the effectiveness of these methods, by Colony forming units per mL (CFU/mL), and the mechanical properties of the material were assessed. Student's t-test was used to assess the number of CFUs while ANOVA and Tukey's test were used to assess elastic strength. RESULTS: Ultraviolet treatment was not completely effective for sterilization. No loss of mechanical properties occurred with the use of the different sterilization methods (p > 0.05). CONCLUSION: Biological control of elastomeric chains does not affect their mechanical properties. PMID:26154462

  8. Mechanical properties of ultra-fine grained zirconia ceramics

    NARCIS (Netherlands)

    Theunissen, G.S.A.M.; Bouma, J.S.; Winnubst, A.J.A.; Burggraaf, A.J.

    1992-01-01

    The mechanical properties of tetragonal zirconia (TZP) materials doped with Y, Ce or Ti were studied as a function of temperature and grain size. Fine grained Y-TZP (grain size < 0.3 mgrm) shows values for fracture toughness and strength at room temperature, which are comparable with the coarse grai

  9. Theoretical Modeling of Mechanical Behavior and Release Properties of Microcapsules

    NARCIS (Netherlands)

    Sagis, L.M.C.

    2015-01-01

    Microcapsules in food often have a shell with a complex microstructure; the mechanical and structural properties of these shells affect the response of the capsules to deforming forces and the release kinetics of encapsulated components. In this chapter we will discuss a number of models which are t

  10. Influence of tempering temperature on mechanical properties of cast steels

    Directory of Open Access Journals (Sweden)

    G. Golański

    2008-12-01

    Full Text Available The paper presents results of research on the influence of tempering temperature on structure and mechanical properties of bainite hardened cast steel: G21CrMoV4 – 6 (L21HMF and G17CrMoV5 – 10 (L17HMF. Investigated cast steels were taken out from internal frames of steam turbines serviced for long time at elevated temperatures. Tempering of the investigated cast steel was carried out within the temperature range of 690 ÷ 730 C (G21CrMoV4 – 6 and 700 ÷ 740 C (G17CrMoV5 – 10. After tempering the cast steels were characterized by a structure of tempered lower bainite with numerous precipitations of carbides. Performed research of mechanical properties has shown that high temperatures of tempering of bainitic structure do not cause decrease of mechanical properties beneath the required minimum.oo It has also been proved that high-temperature tempering (>720 oC ensures high impact energy at the 20% decrease of mechanical properties.

  11. Sterilizing elastomeric chains without losing mechanical properties. Is it possible?

    Directory of Open Access Journals (Sweden)

    Matheus Melo Pithon

    2015-06-01

    Full Text Available OBJECTIVE: To investigate the effects of different sterilization/disinfection methods on the mechanical properties of orthodontic elastomeric chains. METHODS: Segments of elastomeric chains with 5 links each were sent for sterilization by cobalt 60 (Co60 (20 KGy gamma ray technology. After the procedure, the elastomeric chains were contaminated with clinical samples of Streptococcus mutans. Subsequently, the elastomeric chains were submitted to sterilization/disinfection tests carried out by means of different methods, forming six study groups, as follows: Group 1 (control - without contamination, Group 2 (70°GL alcohol, Group 3 (autoclave, Group 4 (ultraviolet, Group 5 (peracetic acid and Group 6 (glutaraldehyde. After sterilization/disinfection, the effectiveness of these methods, by Colony forming units per mL (CFU/mL, and the mechanical properties of the material were assessed. Student's t-test was used to assess the number of CFUs while ANOVA and Tukey's test were used to assess elastic strength. RESULTS: Ultraviolet treatment was not completely effective for sterilization. No loss of mechanical properties occurred with the use of the different sterilization methods (p > 0.05. CONCLUSION: Biological control of elastomeric chains does not affect their mechanical properties.

  12. Exploration of mechanisms underlying the strain-rate-dependent mechanical property of single chondrocytes

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Trung Dung; Gu, YuanTong, E-mail: yuantong.gu@qut.edu.au [School of Chemistry, Physics and Mechanical Engineering, Queensland University of Technology, Brisbane, Queensland (Australia)

    2014-05-05

    Based on the characterization by Atomic Force Microscopy, we report that the mechanical property of single chondrocytes has dependency on the strain-rates. By comparing the mechanical deformation responses and the Young's moduli of living and fixed chondrocytes at four different strain-rates, we explore the deformation mechanisms underlying this dependency property. We found that the strain-rate-dependent mechanical property of living cells is governed by both of the cellular cytoskeleton and the intracellular fluid when the fixed chondrocytes are mainly governed by their intracellular fluid, which is called the consolidation-dependent deformation behavior. Finally, we report that the porohyperelastic constitutive material model which can capture the consolidation-dependent behavior of both living and fixed chondrocytes is a potential candidature to study living cell biomechanics.

  13. Structure - property relations of high-temperature composite polymer matrices

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, R.J.; Jurek, R.J.; Larive, D.E. [Michigan Molecular Institute, Midland, MI (United States); Tung, C.M. [Northrop Corp., Hawthorne, CA (United States); Donnellan, T. [Naval Air Development Center, Warminster, PA (United States)

    1993-12-31

    The structure-deformation-failure mode-mechanical property relations of high-temperature thermoplastic polyimide and thermoset bismaleimide (BMI) polymeric matrices and their composites will be discussed. In the case of polyimides, the effects of test temperature, thermal history, strain rate, type of filler, and filler volume fraction on structure - property relations will be discussed. For BMIs we report systematic Fourier transform infrared spectroscopy and differential scanning calorimetry studies of the cure reactions as a function of chemical composition and time - temperature cure conditions and then describe the resultant cross-linked network structure based on our understanding of the cure reactions. The optimization of the BMI matrix toughness will be considered in terms of network structure and process-induced matrix microcracking. We also describe optimization of composite prepreg, lamination and postcure conditions based on cure kinetics, and their relationship to the BMI viscosity-time-temperature profiles. The critical processing-performance limitations of high-temperature polymer matrices will be critically discussed, and toughening approaches to address these limitations, such as toughness over a wide temperature range, will be presented. 7 refs., 2 figs., 1 tab.

  14. Matrix properties relating to stability analysis

    Energy Technology Data Exchange (ETDEWEB)

    Di Caprio, U. [ENEL s.p.a., Cologno Monzese (Italy)

    2001-03-01

    With reference to a multimachine power system are presented properties and conditions to be satisfied by matrices M, K, D (inertia coefficients, synchronizing coefficients and damping coefficients) in order that the system can be stable. The analysis is carried out with the assumption that the transfer-conductances are negligible while the damping effects (of the field and damper circuits) are taken into account. The formulation is general, i.e. it can be applied to any system with n degrees of freedom, subjected to conservative positional forces and to dissipative forces linearly dependent upon the speed. (author)

  15. Custom impression trays: Part I--Mechanical properties.

    Science.gov (United States)

    Breeding, L C; Dixon, D L; Moseley, J P

    1994-01-01

    Dimensional stability of custom impression trays is an important factor in determining the degree of accuracy achieved in forming a master cast. Such trays must remain stable over time and must not exhibit permanent deformation when a completed impression is removed from the oral cavity. Measurement of the mechanical properties allows comparison between various tray materials and is useful in interpreting data on stresses incurred during removal of the completed impression. In Part I of this three-part series, the various mechanical properties of five tray resins: one autopolymerizing polymethyl methacrylate, one light-polymerizing, and three brands of thermoplastic resins were recorded and compared. The thermoplastic resins studied in this investigation exhibited lower measured values for the strength and elastic modulus properties than the light-polymerizing resin and the autopolymerizing polymethyl methacrylate resin studied.

  16. Mechanical property determination of high conductivity metals and alloys

    Science.gov (United States)

    Harrod, D. L.; Vandergrift, E.; France, L.

    1973-01-01

    Pertinent mechanical properties of three high conductivity metals and alloys; namely, vacuum hot pressed grade S-200E beryllium, OFHC copper and beryllium-copper alloy no. 10 were determined. These materials were selected based on their possible use in rocket thrust chamber and nozzle hardware. They were procured in a form and condition similar to that which might be ordered for actual hardware fabrication. The mechanical properties measured include (1) tension and compression stress strain curves at constant strain rate (2) tensile and compressive creep, (3) tensile and compressive stress-relaxation behavior and (4) elastic properties. Tests were conducted over the temperature range of from 75 F to 1600 F. The resulting data is presented in both graphical and tabular form.

  17. Effect of graphene on mechanical properties of cement mortars

    Institute of Scientific and Technical Information of China (English)

    曹明莉; 张会霞; 张聪

    2016-01-01

    Functionalized graphene nano-sheets (FGN) of 0.01%−0.05% (mass fraction) were added to produce FGN-cement composites in the form of mortars. Flow properties, mechanical properties and microstructure of the cementitious material were then investigated. The results indicate that the addition of FGN decreases the fluidity slightly and improves mechanical properties of cement-based composites significantly. The highest strength is obtained with FGN content of 0.02% where the flexural strength and compressive strength at 28 days are 12.917 MPa and 52.42 MPa, respectively. Besides, scanning electron micrographs show that FGN can regulate formation of massive compact cross-linking structures and thermo gravimetric analysis indicates that FGN can accelerate the hydration reaction to increase the function of the composite effectively.

  18. Mechanical Properties of Single-Walled (5,5) Carbon Nanotubes with Vacancy Defects

    Institute of Scientific and Technical Information of China (English)

    YUAN Shi-Jun; KONG Yong; LI Fa-Shen

    2007-01-01

    First-principles simulation is used to investigate the structural and mechanical properties of vacancy defective single-walled (5,5) carbon nanotubes. The relations of the defect concentration, distribution and characteristic of defects to Young's modulus of nanotubes are quantitatively studied. It is found that each dangling-bond structure (per supercell) decreases Young's modulus of nanotube by 6.1% for symmetrical distribution cases. However the concentrative vacancy structure with saturated atoms has less influence on carbon nanotubes. It is suggested that the mechanical properties of carbon nanotubes depend strongly upon the structure and relative position of vacancies in a certain defect concentration.

  19. The Frame of Fixed Stars in Relational Mechanics

    Science.gov (United States)

    Ferraro, Rafael

    2016-10-01

    Relational mechanics is a gauge theory of classical mechanics whose laws do not govern the motion of individual particles but the evolution of the distances between particles. Its formulation gives a satisfactory answer to Leibniz's and Mach's criticisms of Newton's mechanics: relational mechanics does not rely on the idea of an absolute space. When describing the behavior of small subsystems with respect to the so called "fixed stars", relational mechanics basically agrees with Newtonian mechanics. However, those subsystems having huge angular momentum will deviate from the Newtonian behavior if they are described in the frame of fixed stars. Such subsystems naturally belong to the field of astronomy; they can be used to test the relational theory.

  20. Porcine bladder acellular matrix (ACM): protein expression, mechanical properties.

    Science.gov (United States)

    Farhat, Walid A; Chen, Jun; Haig, Jennifer; Antoon, Roula; Litman, Jessica; Sherman, Christopher; Derwin, Kathleen; Yeger, Herman

    2008-06-01

    Experimentally, porcine bladder acellular matrix (ACM) that mimics extracellular matrix has excellent potential as a bladder substitute. Herein we investigated the spatial localization and expression of different key cellular and extracellular proteins in the ACM; furthermore, we evaluated the inherent mechanical properties of the resultant ACM prior to implantation. Using a proprietary decellularization method, the DNA contents in both ACM and normal bladder were measured; in addition we used immunohistochemistry and western blots to quantify and localize the different cellular and extracellular components, and finally the mechanical testing was performed using a uniaxial mechanical testing machine. The mean DNA content in the ACM was significantly lower in the ACM compared to the bladder. Furthermore, the immunohistochemical and western blot analyses showed that collagen I and IV were preserved in the ACM, but possibly denatured collagen III in the ACM. Furthermore, elastin, laminin and fibronectin were mildly reduced in the ACM. Although the ACM did not exhibit nucleated cells, residual cellular components (actin, myosin, vimentin and others) were still present. There was, on the other hand, no significant difference in the mean stiffness between the ACM and the bladder. Although our decellularization method is effective in removing nuclear material from the bladder while maintaining its inherent mechanical properties, further work is mandatory to determine whether these residual DNA and cellular remnants would lead to any immune reaction, or if the mechanical properties of the ACM are preserved upon implantation and cellularization.

  1. Short-range mechanical properties of skeletal and cardiac muscles.

    Science.gov (United States)

    Campbell, Kenneth S

    2010-01-01

    Striated muscles are disproportionately stiff for small movements. This facet of their behavior can be demonstrated by measuring the force produced when the muscle is stretched more than about 1% of its initial length. When this is done, it can be seen that force rises rapidly during the initial phases of the movement and much less rapidly during the latter stages of the stretch. Experiments performed using chemically permeabilized skeletal and cardiac muscles show that the initial stiffness of the preparations increases in proportion with isometric force as the free Ca²(+) concentration in the bathing solution is raised from a minimal to a saturating value. This is strong evidence that the short-range mechanical properties of activated muscle result from stretching myosin cross-bridges that are attached between the thick and thin filaments. Relaxed intact muscles also exhibit short-range mechanical properties but the molecular mechanisms underlying this behavior are less clear. This chapter summarizes some of the interesting features of short-range mechanical properties in different types of muscle preparation, describes some of the likely underlying mechanisms and discusses the potential physiological significance of the behavior.

  2. Porcine bladder acellular matrix (ACM): protein expression, mechanical properties

    Energy Technology Data Exchange (ETDEWEB)

    Farhat, Walid A [Department of Surgery, Division of Urology, University of Toronto and Hospital for Sick Children, Toronto, ON M5G 1X8 (Canada); Chen Jun; Haig, Jennifer; Antoon, Roula; Litman, Jessica; Yeger, Herman [Department of Developmental and Stem Cell Biology, Research Institute, Hospital for Sick Children, Toronto, ON M5G 1X8 (Canada); Sherman, Christopher [Department of Anatomic Pathology, Sunnybrook and Women' s College Health Sciences Centre, Toronto, ON (Canada); Derwin, Kathleen [Department of Biomedical Engineering, Lerner Research Institute and Orthopaedic Research Center, Cleveland Clinic Foundation, Cleveland, OH (United States)], E-mail: walid.farhat@sickkids.ca

    2008-06-01

    Experimentally, porcine bladder acellular matrix (ACM) that mimics extracellular matrix has excellent potential as a bladder substitute. Herein we investigated the spatial localization and expression of different key cellular and extracellular proteins in the ACM; furthermore, we evaluated the inherent mechanical properties of the resultant ACM prior to implantation. Using a proprietary decellularization method, the DNA contents in both ACM and normal bladder were measured; in addition we used immunohistochemistry and western blots to quantify and localize the different cellular and extracellular components, and finally the mechanical testing was performed using a uniaxial mechanical testing machine. The mean DNA content in the ACM was significantly lower in the ACM compared to the bladder. Furthermore, the immunohistochemical and western blot analyses showed that collagen I and IV were preserved in the ACM, but possibly denatured collagen III in the ACM. Furthermore, elastin, laminin and fibronectin were mildly reduced in the ACM. Although the ACM did not exhibit nucleated cells, residual cellular components (actin, myosin, vimentin and others) were still present. There was, on the other hand, no significant difference in the mean stiffness between the ACM and the bladder. Although our decellularization method is effective in removing nuclear material from the bladder while maintaining its inherent mechanical properties, further work is mandatory to determine whether these residual DNA and cellular remnants would lead to any immune reaction, or if the mechanical properties of the ACM are preserved upon implantation and cellularization.

  3. Brillouin microspectroscopy of nanostructured biomaterials: photonics assisted tailoring mechanical properties

    Science.gov (United States)

    Meng, Zhaokai; Jaiswal, Manish K.; Chitrakar, Chandani; Thakur, Teena; Gaharwar, Akhilesh K.; Yakovlev, Vladislav V.

    2016-03-01

    Developing new biomaterials is essential for the next-generation of materials for bioenergy, bioelectronics, basic biology, medical diagnostics, cancer research, and regenerative medicine. Specifically, recent progress in nanotechnology has stimulated the development of multifunctional biomaterials for tissue engineering applications. The physical properties of nanocomposite biomaterials, including elasticity and viscosity, play key roles in controlling cell fate, which underlines therapeutic success. Conventional mechanical tests, including uniaxial compression and tension, dynamic mechanical analysis and shear rheology, require mechanical forces to be directly exerted onto the sample and therefore may not be suitable for in situ measurements or continuous monitoring of mechanical stiffness. In this study, we employ spontaneous Brillouin spectroscopy as a viscoelasticity-specific probing technique. We utilized a Brillouin spectrometer to characterize biomaterial's microscopic elasticity and correlated those with conventional mechanical tests (e.g., rheology).

  4. Mechanical properties of recycled PET fibers in concrete

    Directory of Open Access Journals (Sweden)

    Fernando Pelisser

    2012-08-01

    Full Text Available Fiber-reinforced concrete represents the current tendency to apply more efficient crack-resistant concrete. For instance, polyethylene terephthalate (PET is a polyester polymer obtained from recyclable bottles; it has been widely used to produce fibers to obtain cement-based products with improved properties. Therefore, this paper reports on an experimental study of recycled-bottle-PET fiber-reinforced concrete. Fibers with lengths of 10, 15 and 20 mm and volume fractions of 0.05, 0.18 and 0.30% related to the volume of the concrete were used. Physical and mechanical characterization of the concrete was performed, including the determination of compressive strength, flexural strength, Young's modulus and fracture toughness as well as analysis using mercury intrusion porosimetry (MIP and scanning electron microscopy (SEM. Flexure and impact tests were performed after 28 and 150 days. No significant effect of the fiber addition on the compressive strength and modulus of elasticity was observed. However, the Young's modulus was observed to decrease as the fiber volume increased. At 28 days, the concrete flexural toughness and impact resistance increased with the presence of PET fibers, except for the 0.05 vol.% sample. However, at 150 days, this improvement was no longer present due to recycled-bottle-PET fiber degradation in the alkaline concrete environment, as visualized by SEM observations. An increase in porosity also has occurred at 365 days for the fiber-reinforced concrete, as determined by MIP.

  5. Low dimensional silver nanostructures: synthesis, growth mechanism, properties and applications.

    Science.gov (United States)

    Jiang, Xuchuan; Yu, Aibing

    2010-12-01

    This work presents a review of the recent advances on the low-dimensional (LD) silver nanostructures (e.g., one-dimensional nanorods and nanowires, and two-dimensional nanoplates and nanodisks). First, the methods, either physical or chemical, for the synthesis of silver LD nanostructures are introduced. Then, the use is discussed of advanced experimental techniques (e.g., transmission electron microscope, high-resolution transmission electron microscope, scanning electron microscope, atomic force microscope, ultraviolet-visible and Raman spectra) and theoretical techniques at different time and length scales from quantum mechanics (e.g., ab initio simulation and density function theory) to molecular dynamics method for understanding the principles of governing particle growth, as well as discrete dipolar approximate method for understanding the optical properties of different shapes and sizes of silver LD nanostructures. Subsequently, the functional applications of the LD silver nanostructures in different areas such optical, electronic, and sensing, particularly for those related to surface plasma resonance are summarized based on the recent findings. Finally, some perspectives and comments for future investigation of silver nanostructures are also briefly discussed.

  6. COMPARISON OF MECHANICAL PROPERTIES OF DATE PALM FIBER- POLYETHYLENE COMPOSITE

    Directory of Open Access Journals (Sweden)

    Saeed Mahdavi

    2010-09-01

    Full Text Available Date Palm Fiber (DPF is one of the most available natural fibers in the Middle East, especially in Iran and the Persian Gulf region. This research provides a new insight into DPF, with consideration of morphological, chemical characteristics, and bulk density, as well as morphological and mechanical properties of DPF/HDPE wood plastic composite. There are three parts of date palm that are used for producing fiber, the trunk, rachis, and petiole. Results indicated that there is significant difference between trunk and petiole on fiber length but rachis has no significant differences relative to the other parts. The aspect ratios have significant differences among of three parts, with the highest and lowest values measured for the petiole and trunk, respectively. The chemical composition of various parts of the date palm tree differed significantly; with the highest amounts of cellulose and lignin content belong to rachis. Bulk density was measured for three parts of date palm, and the lowest amount was 0.082 g/cm3. The highest strengths were achieved in composites with 30 and 40% fiber content, depended on which original parts of the tree were used.

  7. Altered mechanical properties of the nucleus in disease.

    Science.gov (United States)

    Lombardi, Maria Lucia; Lammerding, Jan

    2010-01-01

    In eukaryotic cells, the nucleus is the largest and most rigid organelle. Therefore, its physical properties contribute critically to the biomechanical behavior of cells, e.g., during amoeboid migration or perfusion through narrow capillaries. Furthermore, it has been speculated that nuclear deformations could directly allow cells to sense mechanical stress, e.g., by modulating the access of specific transcription factors to their binding sites. Defects in nuclear mechanics have also been reported in a variety of muscular dystrophies caused by mutations in nuclear envelope proteins, indicating an important role in the maintenance of cells in mechanically stressed tissue. These findings have prompted the growing field of nuclear mechanics to develop advanced experimental methods to study the physical properties of the nucleus as a function of nuclear structure and organization, and to understand its role in physiology and disease. These experimental techniques include micropipette aspiration, atomic force microscopy of isolated nuclei, cellular strain and compression experiments, and microneedle manipulation of intact cells. These experiments have provided important insights into the mechanical behavior of the nucleus under physiological conditions, the distinct mechanical contributions of the nuclear lamina and interior, and how mutations in nuclear envelope proteins associated with a variety of human diseases can cause distinct alterations in the physical properties of the nucleus and contribute to the disease mechanism. Here, we provide a brief overview of the most common experimental techniques and their application and discuss the implication of their results on our current understanding of nuclear mechanics. Copyright (c) 2010 Elsevier Inc. All rights reserved.

  8. The mechanical properties of the human hip capsule ligaments.

    Science.gov (United States)

    Hewitt, John D; Glisson, Richard R; Guilak, Farshid; Vail, T Parker

    2002-01-01

    The human hip capsule is adapted to facilitate upright posture, joint stability, and ambulation, yet it routinely is excised in hip surgery without a full understanding of its mechanical contributions. The objective of this study was to provide information about the mechanical properties of the ligaments that form the hip capsule. Cadaver bone-ligament-bone specimens of the iliofemoral, ischiofemoral, and femoral arcuate ligaments were tested to failure in tension. The hip capsule was found to be an inhomogeneous structure and should be recognized as being composed of discrete constituent ligaments. The anterior ligaments, consisting of the 2 arms of the iliofemoral ligament, were much stronger than the posterior ischiofemoral ligament, withstanding greater force at failure and exhibiting greater stiffness. Knowledge of the anatomy and mechanical properties of the capsule may help the hip surgeon choose an appropriate surgical approach or repair strategy.

  9. Mechanical Properties of Materials with Nanometer Scale Microstructures

    Energy Technology Data Exchange (ETDEWEB)

    William D. Nix

    2004-10-31

    We have been engaged in research on the mechanical properties of materials with nanometer-scale microstructural dimensions. Our attention has been focused on studying the mechanical properties of thin films and interfaces and very small volumes of material. Because the dimensions of thin film samples are small (typically 1 mm in thickness, or less), specialized mechanical testing techniques based on nanoindentation, microbeam bending and dynamic vibration of micromachined structures have been developed and used. Here we report briefly on some of the results we have obtained over the past three years. We also give a summary of all of the dissertations, talks and publications completed on this grant during the past 15 years.

  10. Does pH influence soil hydro-mechanical properties?

    Science.gov (United States)

    Chaplain, V.; Défossez, P.; Delarue, G.; Dexter, A. R.; Richard, G.; Tessier, D.

    2009-04-01

    Does pH influence soil hydro-mechanical properties ? V. Chaplain1, P. Défossez2, G. Delarue1, A.R. Dexter3, G. Richard3 and D. Tessier1. 1 UR INRA PESSAC RD 10, F-78026 Versailles cedex 2 UMR INRA/URCA FARE, 2 Esplanade Roland Garros, BP 224 F-51686 Reims cedex 2 3 UR INRA Sols 2163 Avenue de la Pomme de Pin - CS 40001 ARDON F-45075 Orléans Cedex 2 Corresponding author : chaplain@versailles.inra.fr Structure of soils and its dynamic, physico-chemistry of the interface are of a great importance in the fate of organic pollutants because it governs the accessibility of pollutants to micro-organisms. The soil structure of soils is related to physical parameters (texture, density, water content) but the physico-chemical properties of the interface is not considered. In this study we performed hydro-mechanical measurements on soil samples taken from the 42-plot long-term experiment in Versailles. Indeed six plots were selected to cover a large range of pH values from acid (3.5) to alkaline (8.2) due to the repeated application of fertilizers. Soils were taken in the 0-20 cm and in the 30-35 cm layer out of the ploughed zone. All soils had similar texture and composition with low organic carbon. Therefore pH changes the surface charges and hydrophobicity that are implied in aggregation process. The two layers had the same pH values. The precompression stress Pc and the compression index Cc were derived from confined compression tests performed on remoulded soil samples (density 1.45 g/cm3) at saturation. Results shows that the precompression stress increased at pH lower than 4. In acid case, precompression stress was higher in subsoil. This increase of Pc was attributed to the hydrophobicity due in part to the condensation of charges probably sensitive to the humectation/dessication processes.

  11. Mechanical Properties of the TiAl IRIS Alloy

    Science.gov (United States)

    Voisin, Thomas; Monchoux, Jean-Philippe; Thomas, Marc; Deshayes, Christophe; Couret, Alain

    2016-12-01

    This paper presents a study of the mechanical properties at room and high temperature of the boron and tungsten containing IRIS alloy (Ti-48Al-2W-0.08B at. pct). This alloy was densified by Spark Plasma Sintering (SPS). The resultant microstructure consists of small lamellar colonies surrounded by γ regions containing B2 precipitates. Tensile tests are performed from room temperature to 1273 K (1000 °C). Creep properties are determined at 973 K (700 °C)/300 MPa, 1023 K (750 °C)/120 MPa, and 1023 K (750 °C)/200 MPa. The tensile strength and the creep resistance at high temperature are found to be very high compared to the data reported in the current literature while a plastic elongation of 1.6 pct is preserved at room temperature. A grain size dependence of both ductility and strength is highlighted at room temperature. The deformation mechanisms are studied by post-mortem analyses on deformed samples and by in situ straining experiments, both performed in a transmission electron microscope. In particular, a low mobility of non-screw segments of dislocations at room temperature and the activation of a mixed-climb mechanism during creep have been identified. The mechanical properties of this IRIS alloy processed by SPS are compared to those of other TiAl alloys developed for high-temperature structural applications as well as to those of similar tungsten containing alloys obtained by more conventional processing techniques. Finally, the relationships between mechanical properties and microstructural features together with the elementary deformation mechanisms are discussed.

  12. BOOK REVIEW: Advanced Mechanics and General Relativity Advanced Mechanics and General Relativity

    Science.gov (United States)

    Louko, Jorma

    2011-04-01

    Joel Franklin's textbook `Advanced Mechanics and General Relativity' comprises two partially overlapping, partially complementary introductory paths into general relativity at advanced undergraduate level. Path I starts with the Lagrangian and Hamiltonian formulations of Newtonian point particle motion, emphasising the action principle and the connection between symmetries and conservation laws. The concepts are then adapted to point particle motion in Minkowski space, introducing Lorentz transformations as symmetries of the action. There follows a focused development of tensor calculus, parallel transport and curvature, using examples from Newtonian mechanics and special relativity, culminating in the field equations of general relativity. The Schwarzschild solution is analysed, including a detailed discussion of the tidal forces on a radially infalling observer. Basics of gravitational radiation are examined, highlighting the similarities to and differences from electromagnetic radiation. The final topics in Path I are equatorial geodesics in Kerr and the motion of a relativistic string in Minkowski space. Path II starts by introducing scalar field theory on Minkowski space as a limit of point masses connected by springs, emphasising the action principle, conservation laws and the energy-momentum tensor. The action principle for electromagnetism is introduced, and the coupling of electromagnetism to a complex scalar field is developed in a detailed and pedagogical fashion. A free symmetric second-rank tensor field on Minkowski space is introduced, and the action principle of general relativity is recovered from coupling the second-rank tensor to its own energy-momentum tensor. Path II then merges with Path I and, supplanted with judicious early selections from Path I, can proceed to the Schwarzschild solution. The choice of material in each path is logical and focused. A notable example in Path I is that Lorentz transformations in Minkowki space are introduced

  13. Effects of Chemotherapy-Induced Alterations in Cell Mechanical Properties on Cancer Metastasis

    Science.gov (United States)

    Prathivadhi, Sruti; Ekpenyong, Andrew; Nichols, Michael; Taylor, Carolyn; Ning, Jianhao

    Biological cells can modulate their mechanical properties to suit their functions and in response to changes in their environment. Thus, mechanical phenotyping of cells has been employed for tracking stem cell differentiation, bacterial infection, cell death, etc. Malignant transformation of cells also involves changes in mechanical properties. However, the extent to which mechanical properties of cancer cells contribute to metastasis is not well understood. Yet, more than 90% of all cancer deaths are directly related to metastasis. Transit of cells through the microcirculation is one of the key features of metastasis. We hypothesize that cancer treatment regimens do inadvertently alter cell mechanical properties in ways that might promote cancer metastasis. We use a microfluidic microcirculation mimetic (MMM) platform which mimics the capillary constrictions of the pulmonary and peripheral microcirculation to determine if in-vivo-like mechanical stimuli can evoke different responses from cells subjected to various cancer drugs. In particular, we show that cancer cells treated with chemotherapeutic drugs such as daunorubicin, become more deformable at short timescales (0.1 s) and transit faster through the device. Our results are first steps in evaluating the pro- or anti-metastatic effects of chemotherapeutic drugs based on their induced alterations in cell mechanical properties.

  14. Mechanical properties of Municipal Solid Waste by SDMT

    Energy Technology Data Exchange (ETDEWEB)

    Castelli, Francesco, E-mail: francesco.castelli@unikore.it [Geotechnical Engineering, Faculty of Engineering and Architecture, Kore University of Enna, 94100 Enna (Italy); Maugeri, Michele [Geotechnical Engineering, Department of Civil and Environmental Engineering, University of Catania, 95125 Catania (Italy)

    2014-02-15

    Highlights: • The adoption of the SDMT for the measurements of MSW properties is proposed. • A comparison between SDMT results and laboratory tests was carried out. • A good reliability has been found in deriving waste properties by SDMT. • Results seems to be promising for the friction angle and Young’s modulus evaluation. - Abstract: In the paper the results of a geotechnical investigation carried on Municipal Solid Waste (MSW) materials retrieved from the “Cozzo Vuturo” landfill in the Enna area (Sicily, Italy) are reported and analyzed. Mechanical properties were determined both by in situ and laboratory large-scale one dimensional compression tests. While among in situ tests, Dilatomer Marchetti Tests (DMT) is used widely in measuring soil properties, the adoption of the DMT for the measurements of MSW properties has not often been documented in literature. To validate its applicability for the estimation of MSW properties, a comparison between the seismic dilatometer (SDMT) results and the waste properties evaluated by laboratory tests was carried out. Parameters for “fresh” and “degraded waste” have been evaluated. These preliminary results seems to be promising as concerns the assessment of the friction angle of waste and the evaluation of the S-wave in terms of shear wave velocity. Further studies are certainly required to obtain more representative values of the elastic parameters according to the SDMT measurements.

  15. Numerical Simulation of the Mechanical Properties and Failure of Heterogeneous Elasto-Plastic Materials

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A general numerical approach was developed to simulate the mechanical properties and the failure of heterogeneous elasto-plastic materials using statistical distributions of the material properties. An appropriate elastic-plastic constitutive relation is used to describe the material behavior and failure in each element, with a two-parameter Weibull distribution used to produce the initial heterogeneous material property variations. An adaptive incremental load-step is applied so that only one or a few elements (or integration points) change their status (i.e., from elastic to plastic, or from plastic to strain failure) within one load step. A failed element is then assigned a very small modulus to simulate the failure rather than removing it from the model, which keeps the continuity of the geometric mesh. The numerical results show that the model is suitable for simulating the effective mechanical properties and failure of heterogeneous materials with local elasto-plastic constitutive relations.

  16. Correlations Between Mechanical Properties of Steel Fiber Reinforced Concrete

    Directory of Open Access Journals (Sweden)

    Carrillo Julián

    2013-06-01

    Full Text Available Tension strength and post-cracking deformation capacities that exhibits steel fiber reinforced concrete (SFRC stimulate its use in elements governed by shear deformations. Aimed at developing design aids that promote the use of SFRC as web shear reinforcement of concrete walls for low-rise economic housing (LEH, an experimental study for describing the mechanical properties of SFRC was carried out. The experimental program included testing of 128 cylinder- and beam-type specimens. According to requirements specified by ACI-318, to thickness of walls used in LEH, and to results of previous studies, three Dramix fibers with length-diameter ratios of 55, 64 and 80 were selected. Fiber dosage was expressed in terms of the minimum fiber dosage specified by ACI-318 for replacing the minimum area of conventional shear reinforcement in beams (60 kg/m3. Therefore, five dosages were used: 0, 40, 45, 60 and 75 kg/m3. Mechanical properties of SFRC under compressive, tensile and flexural stresses were evaluated in this study. Based on trends of experimental results, numerical correlations for estimating both basic mechanical properties and properties that describe flexural performance of SFRC are proposed.

  17. Structure-mechanics property relationship of waste derived biochars.

    Science.gov (United States)

    Das, Oisik; Sarmah, Ajit K; Bhattacharyya, Debes

    2015-12-15

    The widespread applications of biochar in agriculture and environmental remediation made the scientific community ignore its mechanical properties. Hence, to examine the scope of biochar's structural applications, its mechanical properties have been investigated in this paper through nanoindentation technique. Seven waste derived biochars, made under different pyrolysis conditions and from diverse feedstocks, were studied via nanoindentation, infrared spectroscopy, X-ray crystallography, thermogravimetry, and electron microscopy. Following this, an attempt was made to correlate the biochars' hardness/modulus with reaction conditions and their chemical properties. The pine wood biochar made at 900°C and 60min residence time was found to have the highest hardness and elastic modulus of 4.29 and 25.01GPa, respectively. It was shown that a combination of higher heat treatment (≥500°C) temperature and longer residence time (~60min) increases the values of hardness and modulus. It was further realized that pyrolysis temperature was a more dominant factor than residence time in determining the final mechanical properties of biochar particles. The degree of aromaticity and crystallinity of the biochar were also correlated with higher values of hardness and modulus.

  18. Mechanical properties of several iron-nickel meteorites

    Energy Technology Data Exchange (ETDEWEB)

    Mulford, Roberta N [Los Alamos National Laboratory; El - Dasher, Bassem [LLNL

    2011-01-06

    Iron-nickel meteorites exhibit a unique lamellar microstructure, consisting of small regions with steep-iron-nickel composition gradients. The microstructure arises as a result of slow cooling in a planetary core or other large mass. The microstructure is further influenced by variable concentrations of other elements such as phosphorous which may have influenced cooling and phase separation. Mechanical properties of these composite structures have been investigated using Vickers and spherical indentation, x-ray fluorescence, and EBSD. Direct observation of mechanical properties in these highly structured materials provides a valuable supplement to bulk measurements, which frequently exhibit large variation in dynamic properties, even within a single sample. Previous studies of the mechanical properties of a typical iron-nickel meteorite, a Diablo Canyon specimen, indicated that the strength of the composite was higher by almost an order of magnitude than values obtained from laboratory-prepared specimens. This was ascribed to the extreme work-hardening evident in the EBSD measurements. Additional specimens from the Canyon Diablo fall (type IAB, coarse octahedrite) and several fine octahedrite meteorites, from the Muonionalusta meteorite (IVA) and Gibeon fall (IVA), have been examined to establish a range of error on the previously measured yield, to determine the extent to which deformation upon reentry contributes to yield, and to establish the degree to which the strength varies as a function of microstructure.

  19. Unique microstructure and excellent mechanical properties of ADI

    Directory of Open Access Journals (Sweden)

    Jincheng Liu

    2006-11-01

    Full Text Available Amongst the cast iron family, ADI has a unique microstructure and an excellent, optimised combination of mechanical properties. The main microstructure of ADI is ausferrite, which is a mixture ofextremely fine acicular ferrite and stable, high carbon austenite. There are two types of austenite in ADI:(1 the coarser and more equiaxed blocks of austenite between non-parallel acicular structures, which exist mainly in the last solidified area, and (2 the thin films of ustenite between the individual ferriteplatelets in the acicular structure. It is this unique microstructure, which gives ADI its excellent static and dynamic properties, and good low temperature impact toughness. The effect of microstructure on the mechanical properties is explained in more detail by examining the microstructure at the atomic scale. Considering the nanometer grain sizes, the unique microstructure, the excellent mechanical properties,good castability, (which enables near net shape components to be produced economically and in large volumes, and the fact that it can be 100% recycled, it is not overemphasized to call ADI a high-tech,nanometer and “green” material. ADI still has the potential to be further improved and its production and the number of applications for ADI will continue to grow, driven by the resultant cost savings over alternative materials.

  20. Unique microstructure and excellent mechanical properties of ADI

    Institute of Scientific and Technical Information of China (English)

    Jincheng Liu

    2006-01-01

    Amongst the cast iron family, ADI has a unique microstructure and an excellent, optimised combination of mechanical properties. The main microstructure of ADI is ausferrite, which is a mixture of extremely fine acicular ferrite and stable, high carbon austenite. There are two types of austenite in ADI:(1) the coarser and more equiaxed blocks of austenite between non-parallel acicular structures, which exist mainly in the last solidified area, and (2) the thin films of austenite between the individual ferrite platelets in the acicular structure. It is this unique microstructure, which gives ADI its excellent static and dynamic properties, and good low temperature impact toughness. The effect of microstructure on the mechanical properties is explained in more detail by examining the microstructure at the atomic scale.Considering the nanometer grain sizes the unique microstructure, the excellent mechanical properties,good castability, (which enables near net shape components to be produced economically and in large volumes), and the fact that it can be 100% recycled, it is not overemphasized to call ADI a high-tech,nanometer and "green" material. ADI still has the potential to be further improved and its production and the number of applications for ADI will continue to grow, driven by the resultant cost savings over altemative materials.

  1. Effect of equilibrium moisture content on barrier, mechanical and thermal properties of chitosan films.

    Science.gov (United States)

    Aguirre-Loredo, Rocío Yaneli; Rodríguez-Hernández, Adriana Inés; Morales-Sánchez, Eduardo; Gómez-Aldapa, Carlos Alberto; Velazquez, Gonzalo

    2016-04-01

    Water molecules modify the properties of biodegradable films obtained from hydrophilic materials. Most studies dealing with thermal, mechanical and barrier properties of hydrophilic films are carried out under one relative humidity (RH) condition. The objective of this work was to evaluate the effect of the moisture content on the thermal, mechanical and barrier properties of chitosan films under several RH conditions. Microclimates, obtained with saturated salt solutions were used for conditioning samples and the properties of the films were evaluated under each RH condition. Chitosan films absorbed up to 40% of moisture at the higher RH studied. The percentage of elongation and the water vapour permeability increased while tensile strength, Young's modulus and glass transition temperature decreased, when the moisture content increased. The results suggest that the water molecules plasticized the polymer matrix, changing the properties when the films were in contact with high RH environments.

  2. Borel Cardinal Invariant properties of countable Borel equivalence relations

    CERN Document Server

    Coskey, Samuel

    2011-01-01

    Boykin and Jackson recently introduced a property of countable Borel equivalence relations called Borel boundedness, which they showed is closely related to the unions problem for hyperfinite relations. In this paper, we introduce a family of properties of countable Borel equivalence relations which correspond to combinatorial cardinal invariants of the continuum in the same way that Borel boundedness corresponds to the bounding number $\\mathfrak{b}$. We analyze some of the basic behavior of these properties, showing for instance that the property corresponding to the splitting number $\\mathfrak{s}$ coincides with smoothness. We then settle many of the implication relationships between the properties; these relationships turn out to be closely related to (but not the same as) the Borel Tukey ordering on cardinal invariants.

  3. Mechanical properties of fibroblasts depend on level of cancer transformation.

    Science.gov (United States)

    Efremov, Yu M; Lomakina, M E; Bagrov, D V; Makhnovskiy, P I; Alexandrova, A Y; Kirpichnikov, M P; Shaitan, K V

    2014-05-01

    Recently, it was revealed that tumor cells are significantly softer than normal cells. Although this phenomenon is well known, it is connected with many questions which are still unanswered. Among these questions are the molecular mechanisms which cause the change in stiffness and the correlation between cell mechanical properties and their metastatic potential. We studied mechanical properties of cells with different levels of cancer transformation. Transformed cells in three systems with different transformation types (monooncogenic N-RAS, viral and cells of tumor origin) were characterized according to their morphology, actin cytoskeleton and focal adhesion organization. Transformation led to reduction of cell spreading and thus decreasing the cell area, disorganization of actin cytoskeleton, lack of actin stress fibers and decline in the number and size of focal adhesions. These alterations manifested in a varying degree depending on type of transformation. Force spectroscopy by atomic force microscopy with spherical probes was carried out to measure the Young's modulus of cells. In all cases the Young's moduli were fitted well by log-normal distribution. All the transformed cell lines were found to be 40-80% softer than the corresponding normal ones. For the cell system with a low level of transformation the difference in stiffness was less pronounced than for the two other systems. This suggests that cell mechanical properties change upon transformation, and acquisition of invasive capabilities is accompanied by significant softening.

  4. Mechanical properties and stabilities of α-boron monolayers.

    Science.gov (United States)

    Peng, Qing; Han, Liang; Wen, Xiaodong; Liu, Sheng; Chen, Zhongfang; Lian, Jie; De, Suvranu

    2015-01-21

    We investigate the mechanical properties and stabilities of planar α-boron monolayers under various large strains using density functional theory (DFT). α-Boron has a high in-plane stiffness, about 2/3 of that of graphene, which suggests that α-boron is four times as strong as iron. Potential profiles and stress-strain curves indicate that a free standing α-boron monolayer can sustain large tensile strains, up to 0.12, 0.16, and 0.18 for armchair, zigzag, and biaxial deformations, respectively. Third, fourth, and fifth order elastic constants are indispensable for accurate modeling of the mechanical properties under strains larger than 0.02, 0.06, and 0.08 respectively. Second order elastic constants, including in-plane stiffness, are predicted to monotonically increase with pressure, while the trend of Poisson's ratio is reversed. The surface sound speeds of both the compressional and shear waves increase with pressure. The ratio of these two sound speeds increases with the increase of pressure and converges to a value of 2.5. Our results imply that α-boron monolayers are mechanically stable under various large strains and have advanced mechanical properties - high strength and high flexibility.

  5. Property-Property relations: 22 degree and 9 degree discontinuities in the Arabian Sea

    Digital Repository Service at National Institute of Oceanography (India)

    Somasundar, K.; Rajendran, A.; DileepKumar, M.

    Property-property relations, mostly of conservative chemical parameters, are used in this attempt in tracing various discontinuities in the Arabian Sea and to reveal in situ processes together with potential temperature-salinity plots. Plots...

  6. Mechanical and tribological properties of ion beam-processed surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Kodali, Padma [Univ. of Maryland, College Park, MD (United States)

    1998-01-01

    The intent of this work was to broaden the applications of well-established surface modification techniques and to elucidate the various wear mechanisms that occur in sliding contact of ion-beam processed surfaces. The investigation included characterization and evaluation of coatings and modified surfaces synthesized by three surface engineering methods; namely, beam-line ion implantation, plasma-source ion implantation, and DC magnetron sputtering. Correlation among measured properties such as surface hardness, fracture toughness, and wear behavior was also examined. This dissertation focused on the following areas of research: (1) investigating the mechanical and tribological properties of mixed implantation of carbon and nitrogen into single crystal silicon by beam-line implantation; (2) characterizing the mechanical and tribological properties of diamond-like carbon (DLC) coatings processed by plasma source ion implantation; and (3) developing and evaluating metastable boron-carbon-nitrogen (BCN) compound coatings for mechanical and tribological properties. The surface hardness of a mixed carbon-nitrogen implant sample improved significantly compared to the unimplanted sample. However, the enhancement in the wear factor of this sample was found to be less significant than carbon-implanted samples. The presence of nitrogen might be responsible for the degraded wear behavior since nitrogen-implantation alone resulted in no improvement in the wear factor. DLC coatings have low friction, low wear factor, and high hardness. The fracture toughness of DLC coatings has been estimated for the first time. The wear mechanism in DLC coatings investigated with a ruby slider under a contact stress of 1 GPa was determined to be plastic deformation. The preliminary data on metastable BCN compound coatings indicated high friction, low wear factor, and high hardness.

  7. Exterior difference systems and invariance properties of discrete mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Xie Zheng; Xie Duanqiang; Li Hongbo [Center of Mathematical Sciences, Zhejiang University, Zhejiang 310027 (China); Key Laboratory of Mathematics Mechanization, Chinese Academy of Sciences, Beijing 100080 (China)], E-mail: lenozhengxie@yahoo.com.cn

    2008-06-27

    Invariance properties describe the fundamental physical laws in discrete mechanics. Can those properties be described in a geometric way? We investigate an exterior difference system called the discrete Euler-Lagrange system, whose solution has one-to-one correspondence with solutions of discrete Euler-Lagrange equations, and use it to define the first integrals. The preservation of the discrete symplectic form along the discrete Hamilton phase flows and the discrete Noether's theorem is also described in the language of difference forms.

  8. Structural and Mechanical Properties of Fluorinated SWCNTs: a DFT Study

    Directory of Open Access Journals (Sweden)

    I.K. Petrushenko

    2015-03-01

    Full Text Available This paper presents a study on structural and mechanical properties of a series of fluorinated armchair single-walled carbon nanotubes (SWCNTs by using density functional theory. At the PBE / SVP level, the data obtained compare well with experimental and theoretical studies. The results show that fluorination, in general, distort SWNCTs framework, but there exists the difference between ‘axial’ and ‘circumferential’ functionalization. It turns out that elastic properties diminish with increasing concentration of adsorbents, however, the fluorinated SWCNTs remain strong enough to be suitable for reinforcement of composites.

  9. The Structure, Functions, and Mechanical Properties of Keratin

    Science.gov (United States)

    McKittrick, J.; Chen, P.-Y.; Bodde, S. G.; Yang, W.; Novitskaya, E. E.; Meyers, M. A.

    2012-04-01

    Keratin is one of the most important structural proteins in nature and is widely found in the integument in vertebrates. It is classified into two types: α-helices and β-pleated sheets. Keratinized materials can be considered as fiber-reinforced composites consisting of crystalline intermediate filaments embedded in an amorphous protein matrix. They have a wide variety of morphologies and properties depending on different functions. Here, we review selected keratin-based materials, such as skin, hair, wool, quill, horn, hoof, feather, and beak, focusing on the structure-mechanical property-function relationships and finally give some insights on bioinspired composite design based on keratinized materials.

  10. The mechanical and tribological properties of UHMWPE loaded ALN after mechanical activation for joint replacements.

    Science.gov (United States)

    Gong, Kemeng; Qu, Shuxin; Liu, Yumei; Wang, Jing; Zhang, Yongchao; Jiang, Chongxi; Shen, Ru

    2016-08-01

    Ultra-high molecular weight polyethylene (UHMWPE) loaded with alendronate sodium (ALN) has tremendous potential as an orthopeadic biomaterial for joint replacements. However, poor mechanical and tribological properties of UHMWPE-ALN are still obstacle for further application. The purpose of this study was to investigate the effect and mechanism of mechanical activation on mechanical and tribological properties of 1wt% ALN-loaded UHMWPE (UHMWPE-ALN-ma). In this study, tensile test, small punch test and reciprocating sliding wear test were applied to characterize the mechanical and tribological properties of UHMWPE-ALN-ma. Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and Fourier transform infrared spectroscopy (FTIR) were employed to characterize UHMWPE-ALN-ma. Tensile test and small punch test showed that Young׳s modulus, tensile strength and work-to-failure (WTF) of UHMWPE-ALN-ma increased significantly compared to those of UHMWPE-ALN. The friction coefficients and wear factors of UHMWPE-ALN-ma both decreased significantly compared to those of UHMWPE-ALN. Mechanical activation obviously reduced type 1 (void) and type 2 (the disconnected and dislocated machining marks) fusion defects of UHMWPE-ALN-ma, which were revealed by SEM images of freeze fracture surfaces after etching and lateral surfaces of specimens after extension to fracture, respectively. It was attributed to peeled-off layers and chain scission of molecular chains of UHMWPE particles after mechanical activation, which were revealed by SEM images and FTIR spectra of UHMWPE-ALN-ma and UHMWPE-ALN, respectively. Moreover, EDS spectra revealed the more homogeneous distribution of ALN in UHMWPE-ALN-ma compared to that of UHMWPE-ALN. The present results showed that mechanical activation was a potential strategy to improve mechanical and tribological properties of UHMWPE-ALN-ma as an orthopeadic biomaterial for joint replacements.

  11. Remanence Properties and Magnetization Reversal Mechanism of Fe Nanowire Arrays

    Institute of Scientific and Technical Information of China (English)

    WANG Jian-Bo; LIU Qing-Fang; XUE De-Sheng; LI Fa-Shen

    2004-01-01

    @@ Remanence properties and magnetization reversal mechanism of Fe nanowire arrays with diameters 16 nm and130nm are studied. Isothermal remanent magnetization curves show that the contribution of irreversible magnetization decreases when the diameter changes from 16nm to 130nm. The remanence coercivities of these nanowires obtained in dc-demagnetization curve are about 2400 Oe and 800 Oe, respectively. The magnetization reversal mechanism is different in these two samples. For the nanowire array with diameter 16nm, both the nucleation and the pinning have effects on magnetization reversal mechanism, and the pinning field (about 2500Oe) is larger than the nucleation field (about 2200 Oe). However, for the nanowire array with diameter 130nm,the magnetization reversal mechanism is dominated by the pinning effect of domain walls.

  12. Bifurcation property and persistence of configurations for parallel mechanisms

    Institute of Scientific and Technical Information of China (English)

    王玉新; 王仪明; 刘学深

    2003-01-01

    The configuration of parallel mechanisms at the singularity position is uncertain. How to control the mechanism through the singularity position with a given configuration is one of the key problems of the robot controlling. In this paper the bifurcation property and persistence of configurations at the singularity position is investigated for 3-DOF parallel mechanisms. The dimension of the bifurcation equations is reduced by Liapunov-Schmidt reduction method. According to the strong equivalence condition, the normal form which is consistent with the bifurcation condition of the original equation is selected. Through universal unfolding of the bifurcation equation, the influences of the disturbance factors, such as the influence of length of the input component on the configuration persistence at the bifurcation position, are analyzed. Using this method we can obtain the bifurcation curve in which the configuration will be held when the mechanism passes through the singularity position. Therefore, the configuration is under control in this way.

  13. Evaluating mechanical properties and degradation of YTZP dental implants

    Energy Technology Data Exchange (ETDEWEB)

    Sevilla, Pablo, E-mail: pablo.sevilla@upc.edu [Biomaterials and Biomechanics Division, Department of Materials Science and Metallurgy, Technical University of Catalonia (Spain); Sandino, Clara; Arciniegas, Milena [Biomaterials and Biomechanics Division, Department of Materials Science and Metallurgy, Technical University of Catalonia (Spain); Martinez-Gomis, Jordi; Peraire, Maria [Department of Prosthodontics, Faculty of Odontology, University of Barcelona (Spain); Gil, Francisco Javier [Biomaterials and Biomechanics Division, Department of Materials Science and Metallurgy, Technical University of Catalonia (Spain)

    2010-01-01

    Lately new biomedical grade yttria stabilized zirconia (YTZP) dental implants have appeared in the implantology market. This material has better aesthetical properties than conventional titanium used for implants but long term behaviour of these new implants is not yet well known. The aim of this paper is to quantify the mechanical response of YTZP dental implants previously degraded under different time conditions and compare the toughness and fatigue strength with titanium implants. Mechanical response has been studied by means of mechanical testing following the ISO 14801 for Standards for dental implants and by finite element analysis. Accelerated hydrothermal degradation has been achieved by means of water vapour and studied by X-ray diffraction and nanoindentation tests. The results show that the degradation suffered by YTZP dental implants will not have a significant effect on the mechanical behaviour. Otherwise the fracture toughness of YTZP ceramics is still insufficient in certain implantation conditions.

  14. In-situ microfibrillar PP–PA6 composites: rheological, morphological and mechanical properties

    Indian Academy of Sciences (India)

    ALI SAFAEI; MAHMOOD MASOOMI; SEYED MOHAMMAD REZA RAZAVI

    2017-09-01

    In this study, the rheology, morphology and mechanical properties of microfibrillar composites based onpolypropylene reinforced with polyamide 6 (PA6) fibres have been investigated. Influence of different factors such as thePA6 composition and drawing ratio on the output of the extruder, and the compatibilizer composition on the properties ofthese composites, were investigated. The results of rheometric mechanical spectrometer rheological measurements and meltflow index (MFI) showed that the storage modulus, loss modulus and complex viscosity of the microfibrillar composites aredirectly related to the composition of PA6. It was also shown that the presence of compatibilizer was the main factor that ledto decrease of some properties including the storage modulus, loss modulus and complex viscosity and increase in the MFI.The results of mechanical tests on samples prepared with different drawing ratios showed that by increasing the drawing ratiofrom 3 to 5, the mechanical properties increase, while increasing draw ratio from 5 to 8 reduces the mechanical properties.With the increase in the composition of the polyamide phase, the tensile strength of microfibrillar composite compatible withpolypropylene-grafted-maleic anhydride initially increased; however, the tensile strength decreased with a high compositionof polyamide phase. Scanning electron microscope images also revealed that the presence of the compatibilizer in themicrofibrillar composites leads to decrease in the number of undeformed drops, while it reduces the micro-fibres diameter,which greatly improved the final properties of the composites.

  15. Nanoclay reinforced thermoplastic toughened epoxy hybrid syntactic foam: Surface morphology, mechanical and thermo mechanical properties

    Energy Technology Data Exchange (ETDEWEB)

    Asif, A. [Propellants and Special Chemicals Group, Propellants Polymers Chemicals and Materials Entity, Vikram Sarabhai Space Centre, Trivandrum 695022 (India); Rao, V. Lakshmana, E-mail: rao_vl@yahoo.co.in [Propellants and Special Chemicals Group, Propellants Polymers Chemicals and Materials Entity, Vikram Sarabhai Space Centre, Trivandrum 695022 (India); Ninan, K.N. [Propellants and Special Chemicals Group, Propellants Polymers Chemicals and Materials Entity, Vikram Sarabhai Space Centre, Trivandrum 695022 (India)

    2010-09-15

    Epoxy hybrid syntactic foams were prepared with diglycidyl ether of bisphenol A (DGEBA) epoxy resin, diamino diphenyl sulfone (DDS), hydroxyl terminated polyether ether ketone having pendant methyl group (PEEKMOH), microballoon and nanoclay. The density of the foam was maintained between 0.6 and 0.72 g/cc for all compositions. Fracture toughness, tensile, flexural and compressive properties of the foam were evaluated with respect to clay and PEEKMOH concentrations. Morphology by X-ray diffraction revealed that the clay particles within the epoxy resin were intercalated for all the compositions of the syntactic foam. Fracture toughness and mechanical properties of the syntactic foam were significantly improved by the addition of nanoclay. A further enhancement in fracture toughness and mechanical properties was observed by the addition of PEEKMOH. The hybrid epoxy syntactic foam thus prepared exhibited 58%, 77% and 38% improvement in compressive strength, percentage elongation and fracture toughness, respectively, compared to the neat epoxy syntactic foam. The specific mechanical properties were found to be higher for the epoxy hybrid syntactic foam containing 3 wt% nanoclay and 3 wt% of PEEKMOH combination. The storage and loss modulus of the syntactic foam were also increased by the addition of nanoclay and PEEKMOH. A marginal improvement in T{sub g} was observed with clay incorporated syntactic foam. SEM analysis revealed that increased microcracking, crack path deflection, matrix deformation, plastic deformation, rupture of microballoons and debonded microspheres influencing on fracture toughness and mechanical properties of epoxy hybrid syntactic foam.

  16. Mechanical properties of a collagen fibril under simulated degradation.

    Science.gov (United States)

    Malaspina, David C; Szleifer, Igal; Dhaher, Yasin

    2017-11-01

    Collagen fibrils are a very important component in most of the connective tissue in humans. An important process associated with several physiological and pathological states is the degradation of collagen. Collagen degradation is usually mediated by enzymatic and non-enzymatic processes. In this work we use molecular dynamics simulations to study the influence of simulated degradation on the mechanical properties of the collagen fibril. We applied tensile stress to the collagen fiber at different stages of degradation. We compared the difference in the fibril mechanical priorities due the removal of enzymatic crosslink, surface degradation and volumetric degradation. As anticipated, our results indicated that, regardless of the degradation scenario, fibril mechanical properties is reduced. The type of degradation mechanism (crosslink, surface or volumetric) expressed differential effect on the change in the fibril stiffness. Our simulation results showed dramatic change in the fibril stiffness with a small amount of degradation. This suggests that the hierarchical structure of the fibril is a key component for the toughness and is very sensitive to changes in the organization of the fibril. The overall results are intended to provide a theoretical framework for the understanding the mechanical behavior of collagen fibrils under degradation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Mechanical properties and thermal behaviour of LLDPE/MWNTs nanocomposites

    Directory of Open Access Journals (Sweden)

    Tai Jin-hua

    2012-12-01

    Full Text Available Multi-walled carbon nanotubes (MWNTs were incorporated into a linear low-density polyethylene (LLDPE matrix through using screw extrusion and injection technique. The effect of different weight percent loadings of MWNTs on the morphology, mechanical, and thermal of LLDPE/MWNTs nanocomposite had been investigated. It was found that, at low concentration of MWNTs, it could uniformly disperse into a linear low-density polyethylene matrix and provide LLDPE/MWNTs nanocomposites much improved mechanical properties. Thermal analysis showed that a clear improvement of thermal stability for LLDPE/MWNTs nanocomposites increased with increasing MWNTs content.

  18. International conference on Statistical Mechanics of Plasticity and Related Instabilities

    Science.gov (United States)

    2006-11-01

    The papers compiled in this volume are based on talks and posters given at the International Conference on "Statistical Mechanics of Plasticity and Related Instabilities", (SMPRI 2005), held at the Materials Research Center of the Indian Institute of Science, Bangalore, India, from August 29 to September 2, 2005. Our aim in organizing SMPRI 2005 was to promote and enhance interactions between researchers from the statistical physics, materials science and solid mechanics communities. While predicting the (macroscopic) deformation properties of materials is a classical topic of materials science and materials mechanics, statistical physicists have become increasingly interested in the collective processes which control the irreversible deformation of matter on microscopic and mesoscopic scales. The SMPRI 2005 meeting has been a forum for the exchange of concepts, research ideas, and results among these communities. We hope that the contributions contained in this proceedings volume will not only help to continue and deepen this exchange, but also to disseminate the results beyond the, necessarily limited, circle of the actual participants. We want to thank all contributors for the work in preparing their manuscripts. We are grateful to the institutions which have supported this conference, in particular the Asian Office for Aerospace Research and Developement (AOARD/AFOSR), the Jawaharlal Nehru Center for Advanced Scientific Research, the Indian Center for Scientific and Industrial Research, the Indian Defense Research and Developement Organization, The Abdus Salam International Center for Theoretical Physics, Italy, the Indian Institute of Science, in particular the Center for Condensed Matter Theory and Materials Reseach Center, the Department of Science and Technology, India, the Materials Research Society of India, and the Karnatake State Center for Science and Technology. We would also like to thank the staff and students of Materials Research Center, Indian

  19. Enhancing Microstructure and Mechanical Properties of AZ31-MWCNT Nanocomposites through Mechanical Alloying

    Directory of Open Access Journals (Sweden)

    J. Jayakumar

    2013-01-01

    Full Text Available Multiwall carbon nanotubes (MWCNTs reinforced Mg alloy AZ31 nanocomposites were fabricated by mechanical alloying and powder metallurgy technique. The reinforcement material MWCNTs were blended in three weight fractions (0.33%, 0.66%, and 1% with the matrix material AZ31 (Al-3%, zinc-1% rest Mg and blended through mechanical alloying using a high energy planetary ball mill. Specimens of monolithic AZ31 and AZ31-MWCNT composites were fabricated through powder metallurgy technique. The microstructure, density, hardness, porosity, ductility, and tensile properties of monolithic AZ31 and AZ31-MWCNT nano composites were characterized and compared. The characterization reveals significant reduction in CNT (carbon nanoTube agglomeration and enhancement in microstructure and mechanical properties due to mechanical alloying through ball milling.

  20. Response of mechanical properties of glasses to their chemical, thermal and mechanical histories

    DEFF Research Database (Denmark)

    Yue, Yuanzheng

    , surface, thermal history or excess entropy of the final glass state. Here I review recent progresses in understanding of the responses of mechanical properties of oxide glasses to the compositional variation, thermal history and mechanical deformation. The tensile strength, elastic modulus and hardness...... of glass fibers are dependent on the thermal history (measured as fictive temperature), tension, chemical composition and redox state. However, the fictive temperature affects the hardness of bulk glass in a complicated manner, i.e., the effect does not exhibit a clear regularity in the range...... and micro-cracks occurring during indentation of a glass is discussed briefly. Finally I describe the future perspectives and challenges in understanding responses of mechanical properties of oxide glasses to compositional variation, thermal history and mechanical deformation....

  1. Study on the Heat Insulation Property of Down Jackets in Relation to Down Content

    Institute of Scientific and Technical Information of China (English)

    LI Jun; WANG Yun-yi; ZHANG Wei-yuan

    2002-01-01

    Based on the heat transferring theory in the humanclothing-environment system, the heat insulation property and changing pattern of down jackets in relation to its down content is mainly dealt with.By the heatedmanikin testing and the mathematical analysis to the testing data the existence of the optimum down content is found.Furthermore the reason and mechanism of the relation between down content and clothing's heat insulation property are explained.

  2. A Review of the Mechanical Properties of Concrete Containing Biofillers

    Science.gov (United States)

    Ezdiani Mohamad, Mazizah; Mahmood, Ali A.; Min, Alicia Yik Yee; Khalid, Nur Hafizah A.

    2016-11-01

    Sustainable construction is a rapidly increasing research area. Investigators of all backgrounds are using industrial and agro wastes to replace Portland cement in concrete to reduce greenhouse emissions and the corresponding decline in general health. Many types of wastes have been used as cement replacements in concrete including: fly ash, slag and rice husk ash in addition to others. This study investigates the possibility of producing a sustainable approach to construction through the partial replacement of concrete using biofillers. This will be achieved by studying the physical and mechanical properties of two widely available biological wastes in Malaysia; eggshell and palm oil fuel ash (POFA). The mechanical properties tests that were studied and compared are the compression, tensile and flexural tests.

  3. Mechanical and Microstructural Properties of PTFE/Al/W System

    Science.gov (United States)

    Cai, Jing; Jiang, Fengchun; Vecchio, Kenneth S.; Meyers, Marc A.; Nesterenko, Vitali F.

    2007-12-01

    Mechanical and microstructural properties of high density PTFE/Al/W composites consisting of PTFE matrix, aluminum and tungsten particles were investigated. Three types of samples having different porosities and particle sizes of W with an identical weight ratio between PTFE, Al and W were fabricated by Cold Isostatic Pressing. The quasi-static and Hopkinson Bar compression tests were employed to investigate the mechanical properties of these materials. The results demonstrated that the porous PTFE/Al/W composite samples containing fine W particles have higher quasi-static and dynamic fracture stresses than higher density PTFE/Al/W samples containing coarse W particles. ESEM micrographs revealed that deformation occurred mainly in the PTFE matrix while metal particles remain undeformed. We observed nano-fibers of PTFE caused by high strain rate deformation.

  4. Effect of Natural Fillers on Mechanical Properties of GFRP Composites

    Directory of Open Access Journals (Sweden)

    Vikas Dhawan

    2013-01-01

    Full Text Available Fiber reinforced plastics (FRPs have replaced conventional engineering materials in many areas, especially in the field of automobiles and household applications. With the increasing demand, various modifications are being incorporated in the conventional FRPs for specific applications in order to reduce costs and achieve the quality standards. The present research endeavor is an attempt to study the effect of natural fillers on the mechanical characteristics of FRPs. Rice husk, wheat husk, and coconut coir have been used as natural fillers in glass fiber reinforced plastics (GFRPs. In order to study the effect of matrix on the properties of GFRPs, polyester and epoxy resins have been used. It has been found that natural fillers provide better results in polyester-based composites. Amongst the natural fillers, in general, the composites with coconut coir have better mechanical properties as compared to the other fillers in glass/epoxy composites.

  5. Mechanical properties of hot rolled 2519 aluminum alloy plate

    Institute of Scientific and Technical Information of China (English)

    彭大暑; 陈险峰; 林启权; 张辉

    2003-01-01

    The effects of differences of temper on mechanical properties of T6, T7 and T8 plates of aluminum alloy 2519 were studied. The stress corrosion cracking(SCC) sensitivity was evaluated with parameters such as Kσ and Kδ.Tensile tests were divided into two groups: one was performed on tensile specimens without pre-corrosion, the other was performed on tensile specimens which were pre-corroded in 3.5%NaCl+1%H2O2 solution at 25 ℃.The results show that SCC resistance of alloy 2519 ranks in the order of T8>T7>T6 and the mechanical properties rank in the order of T6>T8>T7. SEM fractographs of the failed specimen show that the SCC sensitivity can be determined by the distribution of the second phase particles and size and the shape of grains in the alloy.

  6. Dynamic Mechanical Properties of Bio-Polymer Graphite Thin Films

    Science.gov (United States)

    Saddam Kamarudin, M.; Rus, Anika Zafiah M.; Munirah Abdullah, Nur; Abdullah, M. F. L.

    2017-08-01

    Waste cooking oil is used as the main substances in producing graphite biopolymer thin films. Biopolymer is produce from the reaction of bio-monomer and cross linker with the ratio of 2:1 and addition of graphite with an increment of 2% through a slip casting method. The morphological surface properties of the samples are observed by using Scanning Electron Microscope (SEM). It is shown that the graphite particle is well mixed and homogenously dispersed in biopolymer matrix. Meanwhile, the mechanical response of materials by monitoring the change in the material properties in terms of frequency and temperature of the samples were determined using Dynamic Mechanical Analysis (DMA). The calculated cross-linked density of biopolymer composites revealed the increment of graphite particle loading at 8% gives highest results with 260.012 x 103 M/m3.

  7. Mechanical Properties of Plant Cell Walls Probed by Relaxation Spectra

    DEFF Research Database (Denmark)

    Hansen, Steen Laugesen; Ray, Peter Martin; Karlsson, Anders Ola

    2011-01-01

    Transformants and mutants with altered cell wall composition are expected to display a biomechanical phenotype due to the structural role of the cell wall. It is often quite difficult, however, to distinguish the mechanical behavior of a mutant's or transformant's cell walls from that of the wild...... type. This may be due to the plant’s ability to compensate for the wall modification or because the biophysical method that is often employed, determination of simple elastic modulus and breakstrength, lacks the resolving power necessary for detecting subtle mechanical phenotypes. Here, we apply...... a method, determination of relaxation spectra, which probes, and can separate, the viscoelastic properties of different cell wall components (i.e. those properties that depend on the elastic behavior of load-bearing wall polymers combined with viscous interactions between them). A computer program, Bayes...

  8. Short-term Mechanical Properties of Glass Ionomer Cement

    Institute of Scientific and Technical Information of China (English)

    TANG Sanbao; XU Dongxuan

    2009-01-01

    The setting reaction of glass ionomer cement was studied by analyzing and comparing the short-tem mechanical properties of set cement stored in silicone oil,air and distilled water respectively at different temperatures.For the set cement stored at 37℃,the strength of the sample in the air reached the maximum value after 24 h,then decreased to about 210 MPa and kept steady.The strength of the sample in water increased continuously and slowly,however,the increasing rate of sample stored in silicone oil was higher than that in the water.At 20℃,the increasing rate of compressive strength for sample in air was higher than those in silicone oil and water.The diffusion speed and maintenance of water has significant effects on the mechanical properties of glass ionomer cements.

  9. Mechanical Properties of Plant Cell Walls Probed by Relaxation Spectra

    DEFF Research Database (Denmark)

    Hansen, Steen Laugesen; Ray, Peter Martin; Karlsson, Anders Ola

    2011-01-01

    Transformants and mutants with altered cell wall composition are expected to display a biomechanical phenotype due to the structural role of the cell wall. It is often quite difficult, however, to distinguish the mechanical behavior of a mutant's or transformant's cell walls from that of the wild...... type. This may be due to the plant’s ability to compensate for the wall modification or because the biophysical method that is often employed, determination of simple elastic modulus and breakstrength, lacks the resolving power necessary for detecting subtle mechanical phenotypes. Here, we apply...... a method, determination of relaxation spectra, which probes, and can separate, the viscoelastic properties of different cell wall components (i.e. those properties that depend on the elastic behavior of load-bearing wall polymers combined with viscous interactions between them). A computer program, Bayes...

  10. Effect of elastic and plastic tensile mechanical loading on the magnetic properties of NGO electrical steel

    Science.gov (United States)

    Leuning, N.; Steentjes, S.; Schulte, M.; Bleck, W.; Hameyer, K.

    2016-11-01

    The magnetic properties of non-grain-oriented (NGO) electrical steels are highly susceptible to mechanical stresses, i.e., residual, external or thermal ones. For rotating electrical machines, mechanical stresses are inevitable and originate from different sources, e.g., material processing, machine manufacturing and operating conditions. The efficiency and specific losses are largely altered by different mechanical stress states. In this paper the effect of tensile stresses and plastic deformations on the magnetic properties of a 2.9 wt% Si electrical steel are studied. Particular attention is paid to the effect of magnetic anisotropy, i.e., the influence of the direction of applied mechanical stress with respect to the rolling direction. Due to mechanical stress, the induced anisotropy has to be evaluated as it is related to the stress-dependent magnetostriction constant and the grain alignment.

  11. Mechanical properties and microstructure of Fe3Al intermetallics fabricated by mechanical alloying and spark plasma sintering

    Institute of Scientific and Technical Information of China (English)

    HE Qing; JIA Cheng-chang; MENG Jie

    2006-01-01

    Fabrication technology and mechanical properties of the Fe3Al based alloys were studied by spark plasma sintering from elemental powders (Fe-30Al, volume fraction, %) and mechanically alloying powders. The mechanically alloying powders were processed by the high-energy ball milling the elemental mixture powders with the milling time of 5, 8 and 10 min, respectively. The spark plasma sintering process was performed under the pressure of 50 MPa at 1 050 ℃ for 5 min. The phase identification by X-ray diffraction presents the Fe reacts with Al completely during the processing time. The samples are nearly full density (e.g. the relative density of sinter of raw powder is 99%). The microstructure was observed by TEM. The mechanical properties were tested by three-point bending at room temperature in air. The results show that the mechanical properties are better (e.g. bend strength of 1 500 MPa ) than those of the ordinary Fe3Al casting.

  12. Mechanical properties of polymeric composites with carbon dioxide particles

    Science.gov (United States)

    Moskalyuk, O. A.; Samsonov, A. M.; Semenova, I. V.; Smirnova, V. E.; Yudin, V. E.

    2017-02-01

    Nanocomposites consisting of a polymethylmethacrylate or polystyrene matrix with embedded silicon dioxide nanoparticles surface-modified by silazanes have been prepared by melting technology. The influence of particles on viscoelastic properties of the nanocomposites has been studied using dynamic mechanical analysis. It has been revealed that the addition of 20 wt % of SiO2 raises the flexural modulus of the nanocomposites by 30%.

  13. Microstructure–mechanical property correlation of cryo rolled Zircaloy-4

    Energy Technology Data Exchange (ETDEWEB)

    Sarkar, Apu, E-mail: asarkar5@ncsu.edu; Murty, Korukonda L.

    2015-01-15

    The evolution of microstructure and the mechanical properties of cryo-rolled Zircaloy-4 were both investigated to understand the origin of the alloy’s strength processed at a cryogenic temperature. The correlation of dislocation density, grain size and yield stress of the rolled product indicated that an increase in dislocation density due to the suppression of dynamic recovery is the primary source of strengthening.

  14. Simulative calculation of bromo-polystyrene mechanical properties

    CERN Document Server

    Wang Chao; Tang Yong Jian

    2002-01-01

    The non-crystal model of polystyrene and bromo-polystyrene was established with the help of simulative software in the computer. DREIDING was chosen as force field and its parameters is modified according to the published data. Based on the calculation results and other published data the mechanism properties of polystyrene and bromo-polystyrene, such as bulk module, Yong's module and Poisson's ratios, were discussed

  15. Mechanical properties of D0 Run IIB silicon detector staves

    Energy Technology Data Exchange (ETDEWEB)

    Lanfranco, Giobatta; Fast, James; /Fermilab

    2001-06-01

    A proposed stave design for the D0 Run IIb silicon tracker outer layers featuring central cooling channels and a composite shell mechanical structure is evaluated for self-deflection and deflection due to external loads. This paper contains an introduction to the stave structure, a section devoted to composite lamina and laminate properties and finally a section discussing the beam deflections expected for assembled staves using these laminates.

  16. Microstructure characteristics and mechanical properties of rheocasting 7075 aluminum alloy

    OpenAIRE

    Yang Bin; Mao Weimin; Song Xiaojun

    2013-01-01

    The microstructure characteristics and mechanical properties of 7075 aluminum alloy produced by a new rheoforming technique, under as-cast and optimized heat treatment conditions, were investigated. The present rheoforming combined the innovatively developed rheocasting process, named as ICSPC (inverted cone-shaped pouring channel) process, and the existing HPDC (high pressure die casting) process. The experimental results show that the ICSPC can be used to prepare high quality semi-solid slu...

  17. Characterization of Mechanical Properties of Porcelain Tile Using Ultrasonics

    OpenAIRE

    KURAMA, Semra; Eren, Elif

    2012-01-01

    Ultrasound affords a very useful and versatile non-destructive method, using a large application area, for evaluating the microstructure and mechanical properties of materials. In this study, porcelain tiles were sintered at different temperatures to change their porosity. Following this, the time of flight of both longitudinal and shear waves was measured through the tile. The time of flight of ultrasonic waves was measured using a contact ultrasonic transducer operating on a pulse-echo mode...

  18. ORMOSIL thin films: tuning mechanical properties via a nanochemistry approach.

    Science.gov (United States)

    Palmisano, Giovanni; Le Bourhis, Eric; Ciriminna, Rosaria; Tranchida, Davide; Pagliaro, Mario

    2006-12-19

    The mechanical properties (hardness and elastic modulus) of organically modified silicate thin films can be finely tuned by varying the degree of alkylation and thus the fraction of six- and four-membered siloxane rings in the organosilica matrix. This opens the way to large tunability of parameters that are of crucial practical importance for films that are finding increasing application in numerous fields ranging from microelectronics to chemical sensing.

  19. The mechanical properties of density graded hemp/polyethylene composites

    Science.gov (United States)

    Dauvegis, Raphaël; Rodrigue, Denis

    2015-05-01

    In this work, the production and mechanical characterization of density graded biocomposites based on high density polyethylene and hemp fibres was performed. The effect of coupling agent addition (maleated polyethylene) and hemp content (0-30%) was studied to determine the effect of hemp distribution (graded content) inside the composite (uniform, linear, V and Λ). Tensile and flexural properties are reported to compare the structures, especially in terms of their stress-strain behaviors under tensile loading.

  20. Mechanical, elastic and thermodynamic properties of crystalline lithium silicides

    CERN Document Server

    Schwalbe, Sebastian; Trepte, Kai; Biedermann, Franziska; Mertens, Florian; Kortus, Jens

    2016-01-01

    We investigate crystalline thermodynamic stable lithium silicides phases (LixSiy) with density functional theory (DFT) and a force-field method based on modified embedded atoms (MEAM) and compare our results with experimental data. This work presents a fast and accurate framework to calculate thermodynamic properties of crystal structures with large unit cells with MEAM based on molecular dynamics (MD). Mechanical properties like the bulk modulus and the elastic constants are evaluated in addition to thermodynamic properties including the phonon density of states, the vibrational free energy and the isochoric/isobaric specific heat capacity for Li, Li12Si7, Li7Si3, Li13Si4, Li15Si4, Li21Si5, Li17Si4, Li22Si5 and Si. For a selected phase (Li13Si4) we study the effect of a temperature dependent phonon density of states and its effect on the isobaric heat capacity.

  1. Mechanical properties of carbynes investigated by ab initio total-energy calculations

    DEFF Research Database (Denmark)

    Castelli, Ivano E.; Salvestrini, Paolo; Manini, Nicola

    2012-01-01

    As sp carbon chains (carbynes) are relatively rigid molecular objects, can we exploit them as construction elements in nanomechanics? To answer this question, we investigate their remarkable mechanical properties by ab initio total-energy simulations. In particular, we evaluate their linear...

  2. Effect of track maintenance on mechanical properties of a dirt racetrack: a preliminary study.

    Science.gov (United States)

    Peterson, M L; McIlwraith, C W

    2008-09-01

    When Thoroughbred racehorses experience catastrophic injuries, the track surface is often discussed as a factor. The present study investigated the mechanical properties of the surface and found that significant changes in a track occur during routine maintenance. Questions regarding the relative importance of track variability and hardness require further investigation.

  3. Effect of the storage conditions on mechanical properties and microstructure of biodegradabel baked starch foams

    Science.gov (United States)

    Baked foam films were prepared from four sources of starch: corn, potato, tapioca and chayotextle, and stored at relative moisture conditions of 0 to 75% and at temperatures of 4 and 65 °C. Then, the structural and mechanical properties of the films were evaluated. The results showed that the source...

  4. Bismuth oxide based ceramics with improved electrical and mechanical properties: Part II. Structural and mechanical properties

    NARCIS (Netherlands)

    Kruidhof, H.; Seshan, K.; Velde, van de G.M.H.; Vries, de K.J.; Burggraaf, A.J.

    1988-01-01

    Coprecipitation as a method of preparation for bismuth oxides based ceramics yields relatively strong and machineable materials in comparison with the solid state reaction. Compositions within the system (1−x)Bi2O3|xEr2O3 containing up to twenty five mole percent of erbium oxide show a slow transiti

  5. Generalization of Classical Statistical Mechanics to Quantum Mechanics and Stable Property of Condensed Matter

    CERN Document Server

    Huang, Y C; Zhang, N

    2004-01-01

    Classical statistical average values are generally generalized to average values of quantum mechanics, it is discovered that quantum mechanics is direct generalization of classical statistical mechanics, and we generally deduce both a general new continuous eigenvalue equation and a general discrete eigenvalue equation in quantum mechanics, and discover that a eigenvalue of quantum mechanics is just an extreme value of an operator in possibility distribution, the eigenvalue f is just classical observable quantity. A general classical statistical uncertain relation is further given, the general classical statistical uncertain relation is generally generalized to quantum uncertainty principle, the two lost conditions in classical uncertain relation and quantum uncertainty principle, respectively, are found. We generally expound the relations among uncertainty principle, singularity and condensed matter stability, discover that quantum uncertainty principle prevents from the appearance of singularity of the elec...

  6. Structure and mechanical properties of Octopus vulgaris suckers.

    Science.gov (United States)

    Tramacere, Francesca; Kovalev, Alexander; Kleinteich, Thomas; Gorb, Stanislav N; Mazzolai, Barbara

    2014-02-06

    In this study, we investigate the morphology and mechanical features of Octopus vulgaris suckers, which may serve as a model for the creation of a new generation of attachment devices. Octopus suckers attach to a wide range of substrates in wet conditions, including rough surfaces. This amazing feature is made possible by the sucker's tissues, which are pliable to the substrate profile. Previous studies have described a peculiar internal structure that plays a fundamental role in the attachment and detachment processes of the sucker. In this work, we present a mechanical characterization of the tissues involved in the attachment process, which was performed using microindentation tests. We evaluated the elasticity modulus and viscoelastic parameters of the natural tissues (E ∼ 10 kPa) and measured the mechanical properties of some artificial materials that have previously been used in soft robotics. Such a comparison of biological prototypes and artificial material that mimics octopus-sucker tissue is crucial for the design of innovative artificial suction cups for use in wet environments. We conclude that the properties of the common elastomers that are generally used in soft robotics are quite dissimilar to the properties of biological suckers.

  7. Effect of hydrogen on mechanical properties of -titanium alloys

    Indian Academy of Sciences (India)

    H-J Christ; A Senemmar; M Decker; K Prüßner

    2003-06-01

    Conflicting opinions exist in the literature on the manner in which hydrogen influences the mechanical properties of -titanium alloys. This can be attributed to the -stabilizing effect of hydrogen in these materials leading to major changes in the microstructure as a result of hydrogen charging. The resulting (extrinsic) effect of hydrogen on the mechanical properties can possibly cover up the direct (intrinsic) influences. On the basis of experimentally determined thermodynamic and kinetic data regarding the interaction of hydrogen with -titanium alloys, hydrogen concentrations of up to 8 at.% were established in three commercial alloys by means of hydrogen charging from the gas phase. In order to separate intrinsic and extrinsic effects the charging was carried out during one step of the two-step heat treatment typical of metastable -titanium alloys, while the other step was performed in vacuum. The results on the single-phase condition represent the intrinsic hydrogen effect. Monotonic and cyclic strength increase at the expense of ductility with increasing hydrogen concentration. The brittle to ductile transition temperature shifts to higher values and the fatigue crack propagation threshold value decreases. The microstructure of the metastable, usually two-phase -titanium alloys is strongly affected by hydrogen, although the extent of this effect depends not only on the hydrogen concentration but also on the temperature of charging. This microstructural influence (extrinsic effect) changes the mechanical properties in the opposite direction as compared to the intrinsic hydrogen effect.

  8. Mechanical Properties of Calcium Fluoride-Based Composite Materials

    Science.gov (United States)

    Kleczewska, Joanna; Pryliński, Mariusz; Podlewska, Magdalena; Sokołowski, Jerzy; Łapińska, Barbara

    2016-01-01

    Aim of the study was to evaluate mechanical properties of light-curing composite materials modified with the addition of calcium fluoride. The study used one experimental light-curing composite material (ECM) and one commercially available flowable light-curing composite material (FA) that were modified with 0.5–5.0 wt% anhydrous calcium fluoride. Morphology of the samples and uniformity of CaF2 distribution were analyzed using Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS). Mechanical properties were tested after 24-hour storage of specimens in dry or wet conditions. Stored dry ECM enriched with 0.5–1.0 wt% CaF2 showed higher tensile strength values, while water storage of all modified ECM specimens decreased their tensile strength. The highest Vickers hardness tested after dry storage was observed for 2.5 wt% CaF2 content in ECM. The addition of 2.0–5.0 wt% CaF2 to FA caused significant decrease in tensile strength after dry storage and overall tensile strength decrease of modified FA specimens after water storage. The content of 2.0 wt% CaF2 in FA resulted in the highest Vickers hardness tested after wet storage. Commercially available composite material (FA), unmodified with fluoride addition, demonstrated overall significantly higher mechanical properties. PMID:28004001

  9. Mechanical Properties of Calcium Fluoride-Based Composite Materials

    Directory of Open Access Journals (Sweden)

    Monika Łukomska-Szymańska

    2016-01-01

    Full Text Available Aim of the study was to evaluate mechanical properties of light-curing composite materials modified with the addition of calcium fluoride. The study used one experimental light-curing composite material (ECM and one commercially available flowable light-curing composite material (FA that were modified with 0.5–5.0 wt% anhydrous calcium fluoride. Morphology of the samples and uniformity of CaF2 distribution were analyzed using Scanning Electron Microscopy (SEM and Energy Dispersive Spectroscopy (EDS. Mechanical properties were tested after 24-hour storage of specimens in dry or wet conditions. Stored dry ECM enriched with 0.5–1.0 wt% CaF2 showed higher tensile strength values, while water storage of all modified ECM specimens decreased their tensile strength. The highest Vickers hardness tested after dry storage was observed for 2.5 wt% CaF2 content in ECM. The addition of 2.0–5.0 wt% CaF2 to FA caused significant decrease in tensile strength after dry storage and overall tensile strength decrease of modified FA specimens after water storage. The content of 2.0 wt% CaF2 in FA resulted in the highest Vickers hardness tested after wet storage. Commercially available composite material (FA, unmodified with fluoride addition, demonstrated overall significantly higher mechanical properties.

  10. [Mechanical properties of wiredrawn Ag-Pd-Cu alloys].

    Science.gov (United States)

    Hasegawa, T; Miyagawa, Y; Nakamura, K

    1989-01-01

    Nine experimental Ag-Pd-Cu ternary alloys, containing 20-30 wt% Pd and 10-20 wt% Cu, were cast into rods 4.5 mm in diameter using an original vacuum/argon-pressure oxide-free casting technique. Test samples 2.0 mm in diameter were made from the rods by wire-drawing. After softening and hardening heat treatments, mechanical properties (modulus of elasticity, elastic limit, proof stress, tensile strength, elongation, and Vickers hardness) of the samples were measured to analyze the effects of composition and fifteen sets of correlations between the mechanical properties on the condition that few internal casting defects existed. After softening heat treatment, values of hardness and strength increased with increasing Cu and Pd contents, while they increased approximately with increasing Pd content after hardening heat treatment. After softening and hardening heat treatments, tensile strength ranged from 44.4 to 60.7 and from 68.1 to 89.1 kgf/mm2, respectively. Values of elongation were more than 10% even after hardening heat treatment. Fourteen out of fifteen correlation coefficients (r) were statistically significant (p less than 0.01). One of the regression lines derived was as follows. Tensile strength (kgf/mm2) = 9.1 +/- 0.305 Hv (r = 0.990) Moreover, the mechanical properties observed in this investigation were compared with those of ordinarily cast samples with the same compositions.

  11. Mechanical Properties of a Primary Cilium Measured by Resonant Oscillation

    Science.gov (United States)

    Resnick, Andrew

    Primary cilia are ubiquitous mammalian cellular substructures implicated in an ever-increasing number of regulatory pathways. The well-established `ciliary hypothesis' states that physical bending of the cilium (for example, due to fluid flow) initiates signaling cascades, yet the mechanical properties of the cilium remain incompletely measured, resulting in confusion regarding the biological significance of flow-induced ciliary mechanotransduction. In this work we measure the mechanical properties of a primary cilium by using an optical trap to induce resonant oscillation of the structure. Our data indicate 1), the primary cilium is not a simple cantilevered beam, 2), the base of the cilium may be modeled as a nonlinear rotatory spring, the linear spring constant `k' of the cilium base calculated to be (4.6 +/- 0.62)*10-12 N/rad and nonlinear spring constant ` α' to be (-1 +/- 0.34) *10-10 N/rad2 , and 3) the ciliary base may be an essential regulator of mechanotransduction signalling. Our method is also particularly suited to measure mechanical properties of nodal cilia, stereocilia, and motile cilia, anatomically similar structures with very different physiological functions.

  12. Relationships between supercontraction and mechanical properties of spider silk

    Science.gov (United States)

    Liu, Yi; Shao, Zhengzhong; Vollrath, Fritz

    2005-12-01

    Typical spider dragline silk tends to outperform other natural fibres and most man-made filaments. However, even small changes in spinning conditions can have large effects on the mechanical properties of a silk fibre as well as on its water uptake. Absorbed water leads to significant shrinkage in an unrestrained dragline fibre and reversibly converts the material into a rubber. This process is known as supercontraction and may be a functional adaptation for the silk's role in the spider's web. Supercontraction is thought to be controlled by specific motifs in the silk proteins and to be induced by the entropy-driven recoiling of molecular chains. In analogy, in man-made fibres thermal shrinkage induces changes in mechanical properties attributable to the entropy-driven disorientation of `unfrozen' molecular chains (as in polyethylene terephthalate) or the `broken' intermolecular hydrogen bonds (as in nylons). Here we show for Nephila major-ampullate silk how in a biological fibre the spinning conditions affect the interplay between shrinkage and mechanical characteristics. This interaction reveals design principles linking the exceptional properties of silk to its molecular orientation.

  13. Bulk Mechanical Properties of Single Walled Carbon Nanotube Electrodes

    Science.gov (United States)

    Giarra, Matthew; Landi, Brian; Cress, Cory; Raffaelle, Ryne

    2007-03-01

    The unique properties of single walled carbon nanotubes (SWNTs) make them especially well suited for use as electrodes in power devices such as lithium ion batteries, hydrogen fuel cells, solar cells, and supercapacitors. The performances of such devices are expected to be influenced, at least in part, by the mechanical properties of the SWNTs used in composites or in stand alone ``papers.'' Therefore, the elastic moduli and ultimate tensile strengths of SWNT papers were measured as functions of temperature, SWNT purity, SWNT length, and SWNT bundling. The SWNTs used to produce the papers were synthesized in an alexandrite laser vaporization reactor at 1100^oC and purified using conventional acid-reflux conditions. Characterization of the SWNTs was performed using SEM, BET, TGA, and optical and Raman spectroscopy. The purified material was filtered and dried to yield papers of bundled SWNTs which were analyzed using dynamic mechanical analysis (DMA). It was observed that the mechanical properties of acid-refluxed SWNT papers were significantly improved by controlled thermal oxidation and strain-hardening. Elastic moduli of SWNT papers were measured between 3 and 6 GPa. Ultimate (breaking) tensile stresses were measured between 45 and 90 MPa at 1-3% strain. These results and their implications in regard to potential applications in power devices will be discussed.

  14. Measurement of the Mechanical Properties of Intact Collagen Fibrils

    Science.gov (United States)

    Mercedes, H.; Heim, A.; Matthews, W. G.; Koob, T.

    2006-03-01

    Motivated by the genetic disorder Ehlers-Danlos syndrome (EDS), in which proper collagen synthesis is interrupted, we are investigating the structural and mechanical properties of collagen fibrils. The fibrous glycoprotein collagen is the most abundant protein found in the human body and plays a key role in the extracellular matrix of the connective tissue, the properties of which are altered in EDS. We have selected as our model system the collagen fibrils of the sea cucumber dermis, a naturally mutable tissue. This system allows us to work with native fibrils which have their proteoglycan complement intact, something that is not possible with reconstituted mammalian collagen fibrils. Using atomic force microscopy, we measure, as a function of the concentration of divalent cations, the fibril diameter, its response to force loading, and the changes in its rigidity. Through these experiments, we will shed light on the mechanisms which control the properties of the sea cucumber dermis and hope to help explain the altered connective tissue extracellular matrix properties associated with EDS.

  15. Optical-mechanical properties of diseased cells measured by interferometry

    Science.gov (United States)

    Shaked, Natan T.; Bishitz, Y.; Gabai, H.; Girshovitz, P.

    2013-04-01

    Interferometric phase microscopy (IPM) enables to obtain quantitative optical thickness profiles of transparent samples, including live cells in-vitro, and track them in time with sub-nanometer accuracy without any external labeling, contact or force application on the sample. The optical thickness measured by IPM is a multiplication between the cell integral refractive index differences and its physical thickness. Based on the time-dependent optical thickness profile, one can generate the optical thickness fluctuation map. For biological cells that are adhered to the surface, the variance of the physical thickness fluctuations in time is inversely proportional to the spring factor indicating on cell stiffness, where softer cells are expected fluctuating more than more rigid cells. For homogenous refractive index cells, such as red blood cells, we can calculate a map indicating on the cell stiffness per each spatial point on the cell. Therefore, it is possible to obtain novel diagnosis and monitoring tools for diseases changing the morphology and the mechanical properties of these cells such as malaria, certain types of anaemia and thalassemia. For cells with a complex refractive-index structure, such as cancer cells, decoupling refractive index and physical thickness is not possible in single-exposure mode. In these cases, we measure a closely related parameter, under the assumption that the refractive index does not change much within less than a second of measurement. Using these techniques, we lately found that cancer cells fluctuate significantly more than healthy cells, and that metastatic cancer cells fluctuate significantly more than primary cancer cells.

  16. Systematic characterization of porosity and mass transport and mechanical properties of porous polyurethane scaffolds.

    Science.gov (United States)

    Wang, Yu-Fu; Barrera, Carlos M; Dauer, Edward A; Gu, Weiyong; Andreopoulos, Fotios; Huang, C-Y Charles

    2017-01-01

    One of the key challenges in porous scaffold design is to create a porous structure with desired mechanical function and mass transport properties which support delivery of biofactors and development of function tissue substitute. In recent years, polyurethane (PU) has become one of the most popular biomaterials in various tissue engineering fields. However, there are no studies fully investigating the relations between porosity and both mass transport and mechanical properties of PU porous scaffolds. In this paper, we fabricated PU scaffolds by combining phase inversion and salt (sodium chloride) leaching methods. The tensile and compressive moduli were examined on PU scaffolds fabricated with different PU concentrations (25%, 20% and 15% w/v) and salt/PU weight ratios (9/1, 6/1, 3/1 and 0/1). The mass transport properties of PU scaffolds including hydraulic permeability and glucose diffusivity were also measured. Furthermore, the relationships between the porosity and mass transport and mechanical properties of porous PU scaffold were systemically investigated. The results demonstrated that porosity is a key parameter which governs both mass transport and mechanical properties of porous PU scaffolds. With similar pore sizes, the mass transport and mechanical properties of porous PU scaffold can be described as single functions of porosity regardless of initial PU concentration. The relationships between scaffold porosity and properties can be utilized to facilitate porous PU scaffold fabrication with specific mass transport and mechanical properties. The systematic approach established in this study can be applied to characterization of other biomaterials for scaffold design and fabrication.

  17. Mechanical properties of femoral trabecular bone in dogs

    Directory of Open Access Journals (Sweden)

    Nolte Ingo

    2005-03-01

    Full Text Available Abstract Background Studying mechanical properties of canine trabecular bone is important for a better understanding of fracture mechanics or bone disorders and is also needed for numerical simulation of canine femora. No detailed data about elastic moduli and degrees of anisotropy of canine femoral trabecular bone has been published so far, hence the purpose of this study was to measure the elastic modulus of trabecular bone in canine femoral heads by ultrasound testing and to assess whether assuming isotropy of the cancellous bone in femoral heads in dogs is a valid simplification. Methods From 8 euthanized dogs, both femora were obtained and cubic specimens were cut from the centre of the femoral head which were oriented along the main pressure and tension trajectories. The specimens were tested using a 100 MHz ultrasound transducer in all three orthogonal directions. The directional elastic moduli of trabecular bone tissue and degrees of anisotropy were calculated. Results The elastic modulus along principal bone trajectories was found to be 11.2 GPa ± 0.4, 10.5 ± 2.1 GPa and 10.5 ± 1.8 GPa, respectively. The mean density of the specimens was 1.40 ± 0.09 g/cm3. The degrees of anisotropy revealed a significant inverse relationship with specimen densities. No significant differences were found between the elastic moduli in x, y and z directions, suggesting an effective isotropy of trabecular bone tissue in canine femoral heads. Discussion This study presents detailed data about elastic moduli of trabecular bone tissue obtained from canine femoral heads. Limitations of the study are the relatively small number of animals investigated and the measurement of whole specimen densities instead of trabecular bone densities which might lead to an underestimation of Young's moduli. Publications on elastic moduli of trabecular bone tissue present results that are similar to our data. Conclusion This study provides data about directional elastic

  18. Mechanical properties of yttria-stabilized zirconia ceramics

    Science.gov (United States)

    Shirooyeh A, Mahmood R.

    Superplasticity is a well-known characteristic of Y2O 3-stabilized tetragonal zirconia (3Y-TZP) ceramic composites at elevated temperatures. The present investigation was originated to evaluate the potential of producing zirconia ceramics suitable for achieving superplasticity. High purity 3 mol% Y2O3-stabilized tetragonal zirconia (3Y-TZP) ceramic composites containing 20 wt% alumina were successfully consolidated by application of Cold Isostatic Pressing (CIP) followed by a subsequent sintering process. Constant-stress tensile creep experiments at elevated temperatures were conducted in order to examine plastic deformation behavior of the material. In addition to mechanical testing data, the microstructure observations confirmed superplastic properties of the ceramic composite. It is also known that in order to attain High Strain Rate Superplasticity (HSRS) in zirconia ceramics, it is essential to retain a stable fine-grained microstructure at high temperatures. Experiments have confirmed that adding a second soft phase such as spinel can facilitate to reach high strain-rate superplasticity in zirconia ceramics by suppressing grain growth during sintering process and enhancing cation diffusion. In the present investigation, homogenous 3Y-TZP ceramic composite powders containing 30 vol% MgAl2O4 spinel were successfully prepared through both physical-based and chemical-based methods. An electric current-activated method known as Spark Plasma Sintering (SPS) was employed for powder consolidation process. This is a very rapid electric current-activated sintering technique having a heating rate of 300 K/min. The powder preparation and consolidation steps were carried out over a wide range of conditions to ensure a homogenous nanocomposite. The experiments showed that fully-dense zirconia ceramics with an average initial grain size of the order of ˜100 nm can be sintered at the relatively low processing temperature of 1373 K in 10 min. In order to study the

  19. Mechanical Properties of Nonwoven Reinforced Thermoplastic Polyurethane Composites.

    Science.gov (United States)

    Tausif, Muhammad; Pliakas, Achilles; O'Haire, Tom; Goswami, Parikshit; Russell, Stephen J

    2017-06-05

    Reinforcement of flexible fibre reinforced plastic (FRP) composites with standard textile fibres is a potential low cost solution to less critical loading applications. The mechanical behaviour of FRPs based on mechanically bonded nonwoven preforms composed of either low or high modulus fibres in a thermoplastic polyurethane (TPU) matrix were compared following compression moulding. Nonwoven preform fibre compositions were selected from lyocell, polyethylene terephthalate (PET), polyamide (PA) as well as para-aramid fibres (polyphenylene terephthalamide; PPTA). Reinforcement with standard fibres manifold improved the tensile modulus and strength of the reinforced composites and the relationship between fibre, fabric and composite's mechanical properties was studied. The linear density of fibres and the punch density, a key process variable used to consolidate the nonwoven preform, were varied to study the influence on resulting FRP mechanical properties. In summary, increasing the strength and degree of consolidation of nonwoven preforms did not translate to an increase in the strength of resulting fibre reinforced TPU-composites. The TPU composite strength was mainly dependent upon constituent fibre stress-strain behaviour and fibre segment orientation distribution.

  20. Food mechanical properties in three sympatric species of Hapalemur in Ranomafana National Park, Madagascar.

    Science.gov (United States)

    Yamashita, Nayuta; Vinyard, Christopher J; Tan, Chia L

    2009-07-01

    We investigated mechanical dietary properties of sympatric bamboo lemurs, Hapalemur g. griseus, H. aureus, and H. (Prolemur) simus, in Ranomafana National Park, Madagascar. Each lemur species relies on bamboo, though previous behavioral observations found that they specialize on different parts of a common resource (Tan: Int J Primatol 20 1999 547-566; Tan: PhD dissertation 2000 State University of New York, Stony Brook). On the basis of these earlier behavioral ecology studies, we hypothesized that specialization on bamboo is related to differences in mechanical properties of specific parts. We quantified mechanical properties of individual plant parts from the diets of the bamboo lemur species using a portable tester. The diets of the Hapalemur spp. exhibited high levels of mechanical heterogeneity. The lemurs, however, could be segregated based on the most challenging (i.e., mechanically demanding) foods. Giant bamboo culm pith was the toughest and stiffest food eaten, and its sole lemur consumer, H. simus, had the most challenging diet. However, the mechanical dietary properties of H. simus and H. aureus overlapped considerably. In the cases where lemur species converged on the same bamboo part, the size of the part eaten increased with body size. Plant parts that were harvested orally but not necessarily masticated were the most demanding, indicating that food preparation may place significant loads on the masticatory apparatus. Finally, we describe how mechanical properties can influence feeding behavior. The elaborate procurement processes of H. simus feeding on culm pith and H. griseus and H. aureus feeding on young leaf bases are related to the toughnesses of protective coverings and the lemurs' exploitation of mechanical vulnerabilities in these plants.

  1. Investigation of Mechanical and Electrical Properties of Hybrid Composites Reinforced with Carbon Nanotubes and Micrometer-Sized Silica Particles

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Yun; You, Byeong Il; Ahn, Ji Ho; Lee, Gyo Woo [Chonbuk Nat’l Univ., Junju (Korea, Republic of)

    2016-12-15

    In this study, to enhance the electrical insulation of composite specimens in addition to the improved mechanical properties, the epoxy composite were reinforced with carbon nanotubes and silica particles. Tensile strength, Young's modulus, dynamic mechanical behavior, and electrical resistivity of the specimens were measured with varied contents of the two fillers. The mechanical and electrical properties were discussed, and the experimental results related to the mechanical properties of the specimens were compared with those from several micromechanics models. The hybrid composites specimens with 0.6 wt% of carbon nanotubes and 50 wt% of silica particles showed improved mechanical properties, with increase in tensile strength and Young's modulus up to 11% and 35%, respectively, with respect to those of the baseline specimen. The electrical conductivity of the composite specimens with carbon nanotubes filler also improved. Further, the electrical insulation of the hybrid composites specimens with the two fillers improved in addition to the improvement in mechanical properties.

  2. Relating FTS Catalyst Properties to Performance

    Science.gov (United States)

    Ma, Wenping; Ramana Rao Pendyala, Venkat; Gao, Pei; Jermwongratanachai, Thani; Jacobs, Gary; Davis, Burton H.

    2016-01-01

    During the reporting period June 23, 2011 to August 31, 2013, CAER researchers carried out research in two areas of fundamental importance to the topic of cobalt-based Fischer-Tropsch Synthesis (FTS): promoters and stability. The first area was research into possible substitute promoters that might be used to replace the expensive promoters (e.g., Pt, Re, and Ru) that are commonly used. To that end, three separate investigations were carried out. Due to the strong support interaction of ?-Al2O3 with cobalt, metal promoters are commonly added to commercial FTS catalysts to facilitate the reduction of cobalt oxides and thereby boost active surface cobalt metal sites. To date, the metal promoters examined have been those up to and including Group 11. Because two Group 11 promoters (i.e., Ag and Au) were identified to exhibit positive impacts on conversion, selectivity, or both, research was undertaken to explore metals in Groups 12 - 14. The three metals selected for this purpose were Cd, In, and Sn. At a higher loading of 25%Co on alumina, 1% addition of Cd, In, or Sn was found to-on average-facilitate reduction by promoting a heterogeneous distribution of cobalt consisting of larger lesser interacting cobalt clusters and smaller strongly interacting cobalt species. The lesser interacting species were identified in TPR profiles, where a sharp low temperature peak occurred for the reduction of larger, weakly interacting, CoO species. In XANES, the Cd, In, and Sn promoters were found to exist as oxides, whereas typical promoters (e.g., Re, Ru, Pt) were previously determined to exist in an metallic state in atomic coordination with cobalt. The larger cobalt clusters significantly decreased the active site density relative to the unpromoted 25%Co/Al2O3 catalyst. Decreasing the cobalt loading to 15%Co eliminated the large non-interacting species. The TPR peak for reduction of strongly interacting CoO in the Cd promoted catalyst occurred at a measurably lower temperature

  3. Mechanical properties and formation mechanisms of a wire of single gold atoms

    DEFF Research Database (Denmark)

    Rubio-Bollinger, G.; Bahn, Sune Rastad; Agrait, N.

    2001-01-01

    A scanning tunneling microscope supplemented with a force sensor is used to study the mechanical properties of a novel metallic nanostructure: a freely suspended chain of single gold atoms. We find that the bond strength of the nanowire is about twice that of a bulk metallic bond. We perform ab i...

  4. Symmetry and Relativity : From Classical Mechanics to Modern Particle Physics

    OpenAIRE

    Ajaltouni, Ziad,

    2014-01-01

    to be published in "Natural Science"; The aim of this review is highlighting the common aspects between Symmetry in Physics and the Relativity Theory, particularly Special Relativity. After a brief historical introduction, emphasis is put on the physical foundations of Relativity Theory and its essential role in the clarification of many issues related to fundamental symmetries. Several examples from classical mechanics to modern particle physics will be given and some open questions will be ...

  5. Mechanical properties testing and results for thermal barrier coatings

    Energy Technology Data Exchange (ETDEWEB)

    Cruse, T.A.; Johnsen, B.P.; Nagy, A.

    1995-10-01

    The paper reports on several years of mechanical testing of thermal barrier coatings. The test results were generated to support the development of durability models for the coatings in heat engine applications. The test data that are reviewed include modulus, static strength, and fatigue strength data. The test methods and results are discussed, along with the significant difficulties inherent in mechanical testing of thermal barrier coating materials. The materials include 7 percent wt. and 8 percent wt. yttria, partially stabilized zirconia as well as a cermet material. Both low pressure plasma spray and electron-beam physical vapor deposited coatings were tested. The data indicate the basic trends in the mechanical properties of the coatings over a wide range of isothermal conditions. Some of the trends are correlated with material density.

  6. Mechanical properties testing and results for thermal barrier coatings

    Science.gov (United States)

    Cruse, Thomas A.; Johnsen, B. P.; Nagy, Andrew

    1995-01-01

    The paper reports on several years of mechanical testing of thermal barrier coatings. The test results were generated to support the development of durability models for the coatings in heat engine applications. The test data that are reviewed include modulus, static strength, and fatigue strength data. The test methods and results are discussed, along with the significant difficulties inherent in mechanical testing of thermal barrier coating materials. The materials include 7 percent wt. and 8 percent wt. yttria, partially stabilized zirconia as well as a cermet material. Both low pressure plasma spray and electron-beam physical vapor deposited coatings were tested. The data indicate the basic trends in the mechanical properties of the coatings over a wide range of isothermal conditions. Some of the trends are correlated with material density.

  7. Characterisation of Dynamic Mechanical Properties of Resistance Welding Machines

    DEFF Research Database (Denmark)

    Wu, Pei; Zhang, Wenqi; Bay, Niels

    2005-01-01

    The dynamic mechanical properties of a resistance welding machine have significant influence on weld quality, which must be considered when simulating the welding process numerically. However, due to the complexity of the machine structure and the mutual coupling of components of the machine system...... characterizing the dynamic mechanical characteristics of resistance welding machines is suggested, and a test set-up is designed determining the basic, independent machine parameters required in the model. The model is verified by performing a series of mechanical tests as well as real projection welds......., it is very difficult to measure or calculate the basic, independent machine parameters required in a mathematical model of the machine dynamics, and no test method has so far been presented in literature, which can be applied directly in an industrial environment. In this paper, a mathematical model...

  8. Characterisation of Dynamic Mechanical Properties of Resistance Welding Machines

    DEFF Research Database (Denmark)

    Wu, Pei; Zhang, Wenqi; Bay, Niels

    2005-01-01

    The dynamic mechanical properties of a resistance welding machine have significant influence on weld quality, which must be considered when simulating the welding process numerically. However, due to the complexity of the machine structure and the mutual coupling of components of the machine system......, it is very difficult to measure or calculate the basic, independent machine parameters required in a mathematical model of the machine dynamics, and no test method has so far been presented in literature, which can be applied directly in an industrial environment. In this paper, a mathematical model...... characterizing the dynamic mechanical characteristics of resistance welding machines is suggested, and a test set-up is designed determining the basic, independent machine parameters required in the model. The model is verified by performing a series of mechanical tests as well as real projection welds....

  9. Spherical agglomerates of lactose with enhanced mechanical properties.

    Science.gov (United States)

    Lamešić, Dejan; Planinšek, Odon; Lavrič, Zoran; Ilić, Ilija

    2017-01-10

    The aim of this study was to prepare spherical agglomerates of lactose and to evaluate their physicochemical properties, flow properties, particle friability and compaction properties, and to compare them to commercially available types of lactose for direct compression (spray-dried, granulated and anhydrous β-lactose). Porous spherical agglomerates of α-lactose monohydrate with radially arranged prism-like primary particles were prepared exhibiting a high specific surface area. All types of lactose analysed had passable or better flow properties, except for anhydrous β-lactose, which had poor flowability. Particle friability was more pronounced in larger granulated lactose particles; however, particle structure was retained in all samples analysed. The mechanical properties of spherical agglomerates of lactose, in terms of compressibility, established with Walker analysis, and compactibility, established with a compactibility profile, were found to be superior to any commercially available types of lactose. Higher compactibility of spherical agglomerates of lactose is ascribed to significantly higher particle surface area due to a unique internal structure with higher susceptibility to fragmentation. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. The Effects of Weathering on Mechanical Properties of Glass Fiber Reinforced Plastics (Grp Materials

    Directory of Open Access Journals (Sweden)

    H. Abdullah

    2012-08-01

    Full Text Available Glass fiber reinforced plastics composite is extensively used as a structural material for pools, oil pipes and tanks because it has good corrosion resistance properties.  The effects of weathering on the mechanical properties of glass fiber reinforced plastics (GRP in the Sultanate of Oman have been studied.  The tensile and three point bend specimens were exposed to outdoor conditions (open atmosphere in sunlight and tested for various intervals of time.  It was observed that as the exposure time to sunlight, ultraviolet radiation and dust increases the mechanical properties of GRP materials decrease.  The effects of relative humidity (%RH on the mechanical properties were also studied. It was found that as the relative humidity increased in the atmosphere during the exposure time, the tensile strength, flexural strength and modulus of elasticity are lowered. This work has revealed that the decrease in the mechanical properties of GRP under weathering conditions is subjected to atmospheric conditions such as humidity, temperature, ultraviolet radiation and pollutant.Key Words: Weathering, Glass-Fiber Reinforced Plastics, Degradation

  11. Manufacturing of hydrogel biomaterials with controlled mechanical properties for tissue engineering applications.

    Science.gov (United States)

    Vedadghavami, Armin; Minooei, Farnaz; Mohammadi, Mohammad Hossein; Khetani, Sultan; Rezaei Kolahchi, Ahmad; Mashayekhan, Shohreh; Sanati-Nezhad, Amir

    2017-10-15

    Hydrogels have been recognized as crucial biomaterials in the field of tissue engineering, regenerative medicine, and drug delivery applications due to their specific characteristics. These biomaterials benefit from retaining a large amount of water, effective mass transfer, similarity to natural tissues and the ability to form different shapes. However, having relatively poor mechanical properties is a limiting factor associated with hydrogel biomaterials. Controlling the biomechanical properties of hydrogels is of paramount importance. In this work, firstly, mechanical characteristics of hydrogels and methods employed for characterizing these properties are explored. Subsequently, the most common approaches used for tuning mechanical properties of hydrogels including but are not limited to, interpenetrating polymer networks, nanocomposites, self-assembly techniques, and co-polymerization are discussed. The performance of different techniques used for tuning biomechanical properties of hydrogels is further compared. Such techniques involve lithography techniques for replication of tissues with complex mechanical profiles; microfluidic techniques applicable for generating gradients of mechanical properties in hydrogel biomaterials for engineering complex human tissues like intervertebral discs, osteochondral tissues, blood vessels and skin layers; and electrospinning techniques for synthesis of hybrid hydrogels and highly ordered fibers with tunable mechanical and biological properties. We finally discuss future perspectives and challenges for controlling biomimetic hydrogel materials possessing proper biomechanical properties. Hydrogels biomaterials are essential constituting components of engineered tissues with the applications in regenerative medicine and drug delivery. The mechanical properties of hydrogels play crucial roles in regulating the interactions between cells and extracellular matrix and directing the cells phenotype and genotype. Despite

  12. Determination of mechanical properties from depth-sensing indentation data and results of finite element modeling

    Science.gov (United States)

    Isaenkova, M. G.; Perlovich, Yu A.; Krymskaya, O. A.; Zhuk, D. I.

    2016-04-01

    3D finite element model of indentation process with Berkovich tip was created. Using this model with different type of test materials, several series of calculations were made. These calculations lead to determination of material behavior features during indentation. Relations between material properties and its behavior during instrumented indentation were used for construction of dimensionless functions required for development the calculation algorithm, suitable to determine mechanical properties of materials by results of the depth-sensing indentation. Results of mechanical properties determination using elaborated algorithm for AISI 1020 steel grade were compared to properties obtained with standard compression tests. These two results differ by less than 10% for yield stress that evidence of a good accuracy of the proposed technique.

  13. Lipschitz Properties in Variable Exponent Problems via Relative Rearrangement

    Institute of Scientific and Technical Information of China (English)

    Jean-Michel RAKOTOSON

    2010-01-01

    The author first studies the Lipschitz properties of the monotone and relative rearrangement mappings in variable exponent Lebesgue spaces completing the result given in[9].This paper is ended by establishing the Lipschitz properties for quasilinear problems with variable exponent when the right-hand side is in some dual spaces of a suitable Sobolev space associated to variable exponent.

  14. Hierarchical relationship between bone traits and mechanical properties in inbred mice.

    Science.gov (United States)

    Jepsen, Karl J; Akkus, Ozan J; Majeska, Robert J; Nadeau, Joseph H

    2003-02-01

    Osteoporotic fracture incidence and underlying risk factors like low peak bone mass are heritable, but the genetic basis of osteoporosis remains poorly understood. Based on beam theory, stating that mechanical properties of a structure depend on both the amount and quality of the constituent materials, we investigated the relationship between whole bone mechanical properties and a set of morphological and compositional traits in femurs of eight inbred mouse strains. K-means cluster analysis revealed that individual femora could be classified reliably according to genotype based on the combination of bone area (tissue amount), moment of inertia (tissue distribution), and ash content (tissue quality). This trait combination explained 66-88% of the inter-strain variability in four whole-bone mechanical properties that describe all aspects of the failure process, including measures of brittleness. Stiffness and maximum load were functionally associated with cortical area, while measures of brittleness were associated with ash content. In contrast, work-to-failure was not directly related to a single trait but depended on a combination of trait magnitudes. From these findings, which were entirely consistent with established mechanical theory, we developed a hierarchical paradigm relating the mechanical properties that define bone fragility with readily measurable phenotypic traits that exhibit strong heritability. This paradigm will help guide the search for genes that underlie fracture susceptibility and osteoporosis. Moreover, because the traits we examined are measurable with non-invasive means, this approach may also prove directly applicable to osteoporosis risk assessment.

  15. Prediction of mechanical properties of Al alloys with change of cooling rate

    Directory of Open Access Journals (Sweden)

    Quan-Zhi Dong

    2012-11-01

    Full Text Available The solidification process significantly affects the mechanical properties and there are lots of factors that affect the solidification process. Much progress has been made in the research on the effect of solidification on mechanical properties. Among them, the PF (Phase Field model and CA (Cellular Automata model are widely used as simulation methods which can predict nucleation and its growth, and the size and morphology of the grains during solidification. Although they can give accurate calculation results, it needs too much computational memory and calculation time. So it is difficult to apply the simulation to the real production process. In this study, a more practical simulation approach which can predict the mechanical properties of real aluminum alloys is proposed, by identifying through experiment the relationship between cooling rate and SDAS (Secondary Dendrite Arm Spacing and mechanical properties. The experimentally measured values and the values predicted by simulation have relatively small differences and the mechanical properties of a variety of Al alloys are expected to be predicted before casting through use of the simulation.

  16. Estimation of mechanical properties of single wall carbon nanotubes using molecular mechanics approach

    Indian Academy of Sciences (India)

    P Subba Rao; Sunil Anandatheertha; G Narayana Naik; G Gopalakrishnan

    2015-06-01

    Molecular mechanics based finite element analysis is adopted in the current work to evaluate the mechanical properties of Zigzag, Armchair and Chiral Single wall Carbon Nanotubes (SWCNT) of different diameters and chiralities. Three different types of atomic bonds, that is Carbon–Carbon covalent bond and two types of Carbon–Carbon van der Waals bonds are considered in the carbon nanotube system. The stiffness values of these bonds are calculated using the molecular potentials, namely Morse potential function and Lennard-Jones interaction potential function respectively and these stiffness’s are assigned to spring elements in the finite element model of the CNT. The geometry of CNT is built using a macro that is developed for the finite element analysis software. The finite element model of the CNT is constructed, appropriate boundary conditions are applied and the behavior of mechanical properties of CNT is studied.

  17. Mechanical properties of lunar regolith and lunar soil simulant

    Science.gov (United States)

    Perkins, Steven W.

    1989-01-01

    Through the Surveyor 3 and 7, and Apollo 11-17 missions a knowledge of the mechanical properties of Lunar regolith were gained. These properties, including material cohesion, friction, in-situ density, grain-size distribution and shape, and porosity, were determined by indirect means of trenching, penetration, and vane shear testing. Several of these properties were shown to be significantly different from those of terrestrial soils, such as an interlocking cohesion and tensile strength formed in the absence of moisture and particle cementation. To characterize the strength and deformation properties of Lunar regolith experiments have been conducted on a lunar soil simulant at various initial densities, fabric arrangements, and composition. These experiments included conventional triaxial compression and extension, direct tension, and combined tension-shear. Experiments have been conducted at low levels of effective confining stress. External conditions such as membrane induced confining stresses, end platten friction and material self weight have been shown to have a dramatic effect on the strength properties at low levels of confining stress. The solution has been to treat these external conditions and the specimen as a full-fledged boundary value problem rather than the idealized elemental cube of mechanics. Centrifuge modeling allows for the study of Lunar soil-structure interaction problems. In recent years centrifuge modeling has become an important tool for modeling processes that are dominated by gravity and for verifying analysis procedures and studying deformation and failure modes. Centrifuge modeling is well established for terrestrial enginering and applies equally as well to Lunar engineering. A brief review of the experiments is presented in graphic and outline form.

  18. Rock mechanics related to Jurassic underburden at Valdemar oil field

    DEFF Research Database (Denmark)

    Foged, Niels

    1999-01-01

    .It has been initiated as a feasibility study of the North Jens-1 core 12 taken in the top Jurassic clay shale as a test specimens for integrated petrological, mineralogical and rock mechanical studies. Following topics are studied:(1) Pore pressure generation due to conversion of organic matter...... and deformation properties of the clay shale using the actual core material or outcrop equivalents.(3) Flushing mechanisms for oil and gas from source rocks due to possibly very high pore water pressure creating unstable conditions in deeply burried sedimentsThere seems to be a need for integrating the knowledge...... in a number of geosciences to the benefit of common understanding of important reservoir mechanisms. Rock mechanics and geotechnical modelling might be key points for this understanding of reservoir geology and these may constitute a platform for future research in the maturing and migration from the Jurassic...

  19. Teaching Quantum Mechanical Commutation Relations via an Optical Experiment

    CERN Document Server

    Billur, A Alper; Bursal, Murat

    2015-01-01

    The quantum mechanical commutation relations, which are directly related to the Heisenberg uncertainty principle, have a crucial importance for understanding the quantum mechanics of students. During undergraduate level courses, the operator formalisms are generally given theoretically and it is documented that these abstract formalisms are usually misunderstood by the students. Based on the idea that quantum mechanical phenomena can be investigated via geometric optical tools, this study aims to introduce an experiment, where the quantum mechanical commutation relations are represented in a concrete way to provide students an easy and permanent learning. The experimental tools are chosen to be easily accessible and economic. The experiment introduced in this paper can be done with students or used as a demonstrative experiment in laboratory based or theory based courses requiring quantum physics content; particularly in physics, physics education and science education programs.

  20. PHYSICAL AND MECHANICAL PROPERTIES OF Araucaria angustifolia (Bertol. WOOD FOR THREE STRATUM PHYTOSOCIOLOGICAL

    Directory of Open Access Journals (Sweden)

    Rafael Beltrame

    2010-11-01

    Full Text Available The study of physical and mechanical properties of wood is essential for industrial use both in construction and the manufacture of furniture. Thus, the study aimed to determine the physical and mechanical properties of the Araucaria angustifolia wood in terms of three strata phytosociological. For this, 15 trees were felled, five belonging to the upper stratum, the middle stratum five and five for the lower strata. The trees were deployed for the preparation of specimens used for mechanical testing. In the mechanical characterization of the species assays were performed for impact resistance, static bending, compression axial and perpendicular to the fibers. As for the characterization of physical properties, determined the apparent specific gravity at 12% relative humidity for each extract. The results did not show significant differences in the tests of impact resistance and static bending to the strata phytosociological. As for the apparent specific gravity, compression axial and perpendicular there was a change in the values of propertiesbetween the strata phytosociological, is generally butter in the middle and upper strata. Therefore the physical and mechanical properties tend to present higher values these two strata. The data analysis allowed of Araucaria angustifolia wood has moderate mechanical strength when compared with other species studies.

  1. Mechanical properties of the porcine bile duct wall

    Directory of Open Access Journals (Sweden)

    Andersen Helle

    2004-07-01

    Full Text Available Abstract Background and Aim The function of the common bile duct is to transport bile from the liver and the gall bladder to the duodenum. Since the bile duct is a distensible tube consisting mainly of connective tissue, it is important to obtain data on the passive mechanical wall properties. The aims of this study were to study morphometric and biomechanical wall properties during distension of the bile duct. Methods Ten normal porcine common bile ducts were examined in vitro. A computer-controlled volume ramp infusion system with concomitant pressure recordings was constructed. A video camera provided simultaneous measurement of outer dimensions of the common bile duct. Wall stresses and strains were computed. Results The common bile duct length increased by 25% from 24.4 ± 1.8 mm at zero pressure to 30.5 ± 2.0 mm at 5 kPa (p (βε - 1. The circumferential stress-strain curve was shifted to the left when compared to the longitudinal stress-strain curve, i.e. the linear constants (α values were different (p 0.5. Conclusion The porcine bile duct exhibited nonlinear anisotropic mechanical properties.

  2. Mechanical properties of thermoplastic composites reinforced with Entada Mannii fibre

    Directory of Open Access Journals (Sweden)

    Oluwayomi BALOGUN

    2017-06-01

    Full Text Available The mechanical properties and fracture mechanisms of thermoplastic composites reinforced with Entada mannii fibres was investigated. Polypropylene reinforced with 1, 3, 5, and 7 wt% KOH treated and untreated Entada mannii fibres were processed using a compression moulding machine. The tensile properties, impact strength, and flexural properties of the composites were evaluated while the tensile fracture surface morphology was examined using scanning electron microscopy. The results show that reinforcing polypropylene with Entada mannii fibres resulted in improvement of the tensile strength and elastic modulus. This improvement is remarkable for 5 wt% KOH treated Entada mannii fibre reinforced composites by 28 % increase as compared with the unreinforced polypropylene. The composites reinforced with Entada mannii fibres also had impact strength values of 70 % higher than the unreinforced polypropylene. However, the polypropylene reinforced with 5 and 7wt% KOH treated fibres exhibited significantly higher flexural strength and Young’s modulus by 53% and 52% increase as compared with the unreinforced polypropylene. The fracture surface of the polypropylene composites reinforced with untreated Entada mannii fibres were characterized by fibre debonding, fibre pull-out and matrix yielding while less voids and fibre pull-outs are observed in the composites reinforced with KOH treated Entada mannii fibres. v

  3. Measurement of Mechanical Properties of Cantilever Shaped Materials

    Directory of Open Access Journals (Sweden)

    Thomas Thundat

    2008-05-01

    Full Text Available Microcantilevers were first introduced as imaging probes in Atomic Force Microscopy (AFM due to their extremely high sensitivity in measuring surface forces. The versatility of these probes, however, allows the sensing and measurement of a host of mechanical properties of various materials. Sensor parameters such as resonance frequency, quality factor, amplitude of vibration and bending due to a differential stress can all be simultaneously determined for a cantilever. When measuring the mechanical properties of materials, identifying and discerning the most influential parameters responsible for the observed changes in the cantilever response are important. We will, therefore, discuss the effects of various force fields such as those induced by mass loading, residual stress, internal friction of the material, and other changes in the mechanical properties of the microcantilevers. Methods to measure variations in temperature, pressure, or molecular adsorption of water molecules are also discussed. Often these effects occur simultaneously, increasing the number of parameters that need to be concurrently measured to ensure the reliability of the sensors. We therefore systematically investigate the geometric and environmental effects on cantilever measurements including the chemical nature of the underlying interactions. To address the geometric effects we have considered cantilevers with a rectangular or circular cross section. The chemical nature is addressed by using cantilevers fabricated with metals and/or dielectrics. Selective chemical etching, swelling or changes in Young’s modulus of the surface were investigated by means of polymeric and inorganic coatings. Finally to address the effect of the environment in which the cantilever operates, the Knudsen number was determined to characterize the molecule-cantilever collisions. Also bimaterial cantilevers with high thermal sensitivity were used to discern the effect of temperature

  4. Investigation on mechanical properties of basalt composite fabrics (experiment study

    Directory of Open Access Journals (Sweden)

    Talebi Mazraehshahi H.

    2010-06-01

    Full Text Available To fully appreciate the role and application of composite materials to structures, correct understanding of mechanical behaviors required for selection of optimum material. Fabric reinforced composites are composed of a matrix that is reinforced with pliable fabric, glass fabric is most popular reinforcement for different application specially in aircraft structure, although other fabric material are also used. At this study new fabric material called basalt with epoxy resin introduced and mechanical behaviors of this material investigated from view point of testing. For this study two type of fabric with different thickness used. Comparison between this composite reinforcement with popular reinforcement as carbon, glass, kevlar performed. To determine mechanical properties of epoxy based basalt fabric following test procedure performed : 1. Tensile testing according to ASTM D3039 in 0° and 90° direction to find ultimate strength in tension and shear, modulus of elasticity, elangation and ultimate strain. 2. Compression testing according to EN 2850 ultimate compression strength and maximum deformation under compression loading. 3. Shear testing according to ASTM D3518-94 to find in plane shear response of polymer matrix composites materials. 4. Predict flexural properties of sandwich construction which manufactured from basalt facing with PVC foam core according to ASTM C393-94. Material strength properties must be based on enough tests of material to meet the test procedure specifications [1]. For this reason six specimens were manufactured for testing and the tests were performed on them using an INSTRON machine model 5582. In the study, the effect of percent of resin in basalt reinforced composite was investigated. Also the weights of the ballast based composites with different percent of resin were measured with conventional composites. As the weight is an important parameter in aerospace industry when the designer wants to replace one

  5. Investigation of texture, microstructure, and mechanical properties of a magnesium-lanthanum alloy after thermo-mechanical processing

    Energy Technology Data Exchange (ETDEWEB)

    Elfiad, Djazia; Bourezg, Yousf Islem; Bradai, Djamel [USTHB, Algiers (Algeria). Faculty of Physics; Azzeddine, Hiba [USTHB, Algiers (Algeria). Faculty of Physics; M' sila Univ. (Algeria). Dept. of Physics

    2016-04-15

    The texture, microstructure, and mechanical properties of Mg-1.33La (wt.%) alloy after hot rolling and cold plane strain compression were investigated by using X-ray diffraction, optical microscopy, and micro-hardness measurements. This thermo-mechanical processing resulted in a relative weakening of the texture that was mainly a basal type. The microstructures after hot rolling and cold plane strain compression revealed the presence of a second phase (Mg{sub 17}La{sub 2}), mostly at grain boundaries. Twins were profuse, and their morphologies were quite different after hot rolling and cold plane strain compression. The Mg-1.33La (wt.%) alloy exhibited good room temperature formability and an increase in strength. The alloy's hardness increased with increasing deformation strain. Such properties were explained by the effect of both the Mg{sub 17}La{sub 2} phase precipitation and the sample's texture.

  6. The Green-Kubo formula and the Onsager reciprocity relations in quantum statistical mechanics

    CERN Document Server

    Jaksic, V; Pillet, C

    2005-01-01

    We study linear response theory in the general framework of algebraic quantum statistical mechanics and prove the Green-Kubo formula and the Onsager reciprocity relations for heat fluxes generated by temperature differentials. Our derivation is axiomatic and the key assumptions concern ergodic properties of non-equilibrium steady states.

  7. Bioprinting of hybrid tissue constructs with tailorable mechanical properties

    Energy Technology Data Exchange (ETDEWEB)

    Schuurman, W; Khristov, V; Pot, M W; Dhert, W J A; Malda, J [Department of Orthopaedics, University Medical Center Utrecht (Netherlands); Van Weeren, P R, E-mail: j.malda@umcutrecht.nl [Faculty of Veterinary Sciences, Department of Equine Sciences, Utrecht University (Netherlands)

    2011-06-15

    Tissue/organ printing aims to recapitulate the intrinsic complexity of native tissues. For a number of tissues, in particular those of musculoskeletal origin, adequate mechanical characteristics are an important prerequisite for their initial handling and stability, as well as long-lasting functioning. Hence, organized implants, possessing mechanical characteristics similar to the native tissue, may result in improved clinical outcomes of regenerative approaches. Using a bioprinter, grafts were constructed by alternate deposition of thermoplastic fibers and (cell-laden) hydrogels. Constructs of different shapes and sizes were manufactured and mechanical properties, as well as cell viability, were assessed. This approach yields novel organized viable hybrid constructs, which possess favorable mechanical characteristics, within the same range as those of native tissues. Moreover, the approach allows the use of multiple hydrogels and can thus produce constructs containing multiple cell types or bioactive factors. Furthermore, since the hydrogel is supported by the thermoplastic material, a broader range of hydrogel types can be used compared to bioprinting of hydrogels alone. In conclusion, we present an innovative and versatile approach for bioprinting, yielding constructs of which the mechanical stiffness provided by thermoplastic polymers can potentially be tailored, and combined specific cell placement patterns of multiple cell types embedded in a wide range of hydrogels. (communication)

  8. Microstructural and Mechanical Properties of Alkali Activated Colombian Raw Materials

    Directory of Open Access Journals (Sweden)

    Maria Criado

    2016-03-01

    Full Text Available Microstructural and mechanical properties of alkali activated binders based on blends of Colombian granulated blast furnace slag (GBFS and fly ash (FA were investigated. The synthesis of alkali activated binders was conducted at 85 °C for 24 h with different slag/fly ash ratios (100:0, 80:20, 60:40, 40:60, 20:80, and 0:100. Mineralogical and microstructural characterization was carried out by means of X-ray diffraction (XRD, Fourier transform infrared spectroscopy (FTIR, Scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX and Nuclear magnetic resonance (NMR. Mechanical properties were evaluated through the compressive strength, modulus of elasticity and Poisson’s ratio. The results show that two different reaction products were detected in the slag/fly ash mixtures, a calcium silicate hydrate with Al in its structure (C-A-S-H gel and a sodium aluminosilicate hydrate (N-A-S-H gel with higher number of polymerized species and low content in Ca. It was found that with the increase of the amount of added slag, the amount of C-A-S-H gel increased and the amount of N-A-S-H gel decreased. The matrix was more dense and compact with almost absence of pores. The predominance of slag affected positively the compressive strength, Young’s modulus and Poisson’s ratio, with 80% slag and 20% fly ash concrete being the best mechanical performance blend.

  9. Atomic vacancies significantly degrade the mechanical properties of phosphorene

    Science.gov (United States)

    Sha, Zhen-Dong; Pei, Qing-Xiang; Zhang, Ying-Yan; Zhang, Yong-Wei

    2016-08-01

    Due to low formation energies, it is very easy to create atomic defects in phosphorene during its fabrication process. How these atomic defects affect its mechanical behavior, however, remain unknown. Here, we report on a systematic study of the effect of atomic vacancies on the mechanical properties and failure behavior of phosphorene using molecular dynamics simulations. It is found that atomic vacancies induce local stress concentration and cause early bond-breaking, leading to a significant degradation of the mechanical properties of the material. More specifically, a 2% concentration of randomly distributed mono-vacancies is able to reduce the fracture strength by ∼40%. An increase in temperature from 10 to 400 K can further deteriorate the fracture strength by ∼60%. The fracture strength of defective phosphorene is also found to be affected by defect distribution. When the defects are patterned in a line, the reduction in fracture strength greatly depends on the tilt angle and the loading direction. Furthermore, we find that di-vacancies cause an even larger reduction in fracture strength than mono-vacancies when the loading is in an armchair direction. These findings provide important guidelines for the structural design of phosphorene in future applications.

  10. Study on Thermal and Mechanical Properties of EPDM Insulation

    Science.gov (United States)

    Zhang, Zhong-Shui; Xu, Jin-Sheng; Chen, Xiong; Jiang, Jing

    As the most common insulation material of solid rocket motors, thermal and mechanical properties of ethylene propylene diene monomer (EPDM) composite are inspected in the study. Referring to the results of thermogravimetric analysis (TGA), composition and morphology of EPDM composite in different thermal degradation degree are investigated by scanning electron microscope (SEM) to inspect the mechanism of thermal insulation. Mechanical properties of EPDM composite in the state of pyrolysis are investigated by uniaxial tensile tests. At the state of initial pyrolysis, composite belongs to the category of hyperelastic-viscoelastic material. The tendency of tensile strength increased and elongation decreased with increasing of heating temperature. Composite behaves as the linear rule at the state of late pyrolysis, which belongs to the category of bittle. The elasticity modulus of curves are almost the same while the heating temperature ranges from 200°C to 300°C, and then gradually go down. The tensile strength of pyrolytic material reach the highest at the heating temperature of 300°C, and the virgin material has the largest elongation.

  11. Dynamic viscoelastic properties of collagen gels with high mechanical strength.

    Science.gov (United States)

    Mori, Hideki; Shimizu, Kousuke; Hara, Masayuki

    2013-08-01

    We developed a new method for the preparation of mechanically strong collagen gels by combining successively basic gel formation, followed by 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) cross-linking and lyophilization. Gels cross-linked three times with this method showed stronger mechanical properties (G': 3730±2060 Pa, G″: 288±35 Pa) than a conventional gel that was sequentially cross-linked with EDC once (G': 226±70 Pa, G″: 21±4.4 Pa), but not as strong as the same gel with heating for 30 min at 80°C (G': 7010±830 Pa, G″: 288±35 Pa) reported in our previous paper. The conventional collagen gel was cross-linked with EDC once, heated once, and then subjected twice to a lyophilization-gel formation-cross-linking cycle to give three-cycled gel 2. This gel had the strongest mechanical properties (G': 40,200±18,000 Pa, G″: 3090±1400 Pa, Young's modulus: 0.197±0.069 MPa) of the gels tested. These promising results suggest possible applications of the gels as scaffolds in tissue engineering research.

  12. Mechanical properties of metallic nanowires using tight-binding model

    Science.gov (United States)

    Aish, Mohammed; Starostenkov, Mikhail

    2016-01-01

    The mechanical properties of Nickel nanowires have been studied at different temperatures using molecular dynamics simulations. Molecular Dynamics (MD) simulations have been carried out on pure Nickel (Ni) crystal with face-centered cubic (FCC) lattice upon application of uniaxial tension at nanolevel with a speed of 20 m/s. The deformation corresponds to the direction . To the calculated block of crystal, free boundary conditions are applied in the directions , . A many body interatomic potential for Ni within the second moment approximation of the tight binding model (the Cleri-Rosato potentials) was employed to carry out three dimensional molecular dynamics simulations. MD simulation used to investigate the effect of temperature of Ni nanowire on the nature of deformation and fracture. Temperature effect on the extension property of metal nanowire is discussed in detail. The mechanical strengths and the mechanical strain of the nanowires decrease linearly with the increasing temperature. The feature of deformation energy can be divided into four regions: quasi-elastic, plastic, flow and failure. Experiments have shown that when the temperature increases the yielding stress decreases, the first stage of deformation was narrowed, and the second stage was widened. The results showed that breaking position depended on temperature.

  13. Mechanical properties for irradiated face-centred cubic nanocrystalline metals

    Science.gov (United States)

    Xiao, X. Z.; Song, D. K.; Chu, H. J.; Xue, J. M.; Duan, H. L.

    2015-01-01

    In this paper, a self-consistent plasticity theory is proposed to model the mechanical behaviours of irradiated face-centred cubic nanocrystalline metals. At the grain level, a tensorial crystal model with both irradiation and grain size effects is applied for the grain interior (GI), whereas both grain boundary (GB) sliding with irradiation effect and GB diffusion are considered in modelling the behaviours of GBs. The elastic-viscoplastic self-consistent method with considering grain size distribution is developed to transit the microscopic behaviour of individual grains to the macroscopic properties of nanocrystals (NCs). The proposed theory is applied to model the mechanical properties of irradiated NC copper, and the feasibility and efficiency have been validated by comparing with experimental data. Numerical results show that: (i) irradiation-induced defects can lead to irradiation hardening in the GIs, but the hardening effect decreases with the grain size due to the increasing absorption of defects by GBs. Meanwhile, the absorbed defects would make the GBs softer than the unirradiated case. (ii) There exists a critical grain size for irradiated NC metals, which separates the grain size into the irradiation hardening dominant region (above the critical size) and irradiation softening dominant region (below the critical size). (iii) The distribution of grain size has a significant influence on the mechanical behaviours of both irradiated and unirradiated NCs. The proposed model can offer a valid theoretical foundation to study the irradiation effect on NC materials. PMID:27547091

  14. On the Mechanical Properties of Chiral Carbon Nanotubes

    Directory of Open Access Journals (Sweden)

    Mahnaz Zakeri

    2013-12-01

    Full Text Available Carbon nanotubes (CNTs are specific structures with valuable characteristics. In general, the structure of each nanotube is defined by a unique chiral vector. In this paper, different structures of short single-walled CNTs are simulated and their mechanical properties are determined using finite element method. For this aim, a simple algorithm is presented which is able to model the geometry of single-walled CNTs with any desired structure based on nano-scale continuum mechanics approach. By changing the chiral angle from 0 to 30 degree for constant length to radius ratio, the effect of nanotube chirality on its mechanical properties is evaluated. It is observed that the tensile modulus of CNTs changes between 0.93-1.02 TPa for different structures, and it can be higher for chiral structures than zigzag and armchair ones. Also, for different chiral angles, the bending modulus changes between 0.76-0.82 TPa, while the torsional modulus varies in the range of 0.283-0.301TPa.

  15. Structure-mechanical function relations at nano-scale in heat-affected human dental tissue.

    Science.gov (United States)

    Sui, Tan; Sandholzer, Michael A; Le Bourhis, Eric; Baimpas, Nikolaos; Landini, Gabriel; Korsunsky, Alexander M

    2014-04-01

    The knowledge of the mechanical properties of dental materials related to their hierarchical structure is essential for understanding and predicting the effect of microstructural alterations on the performance of dental tissues in the context of forensic and archaeological investigation as well as laser irradiation treatment of caries. So far, few studies have focused on the nano-scale structure-mechanical function relations of human teeth altered by chemical or thermal treatment. The response of dental tissues to thermal treatment is thought to be strongly affected by the mineral crystallite size, their spatial arrangement and preferred orientation. In this study, synchrotron-based small and wide angle X-ray scattering (SAXS/WAXS) techniques were used to investigate the micro-structural alterations (mean crystalline thickness, crystal perfection and degree of alignment) of heat-affected dentine and enamel in human dental teeth. Additionally, nanoindentation mapping was applied to detect the spatial and temperature-dependent nano-mechanical properties variation. The SAXS/WAXS results revealed that the mean crystalline thickness distribution in dentine was more uniform compared with that in enamel. Although in general the mean crystalline thickness increased both in dentine and enamel as the temperature increased, the local structural variations gradually reduced. Meanwhile, the hardness and reduced modulus in enamel decreased as the temperature increased, while for dentine, the tendency reversed at high temperature. The analysis of the correlation between the ultrastructure and mechanical properties coupled with the effect of temperature demonstrates the effect of mean thickness and orientation on the local variation of mechanical property. This structural-mechanical property alteration is likely to be due to changes of HAp crystallites, thus dentine and enamel exhibit different responses at different temperatures. Our results enable an improved understanding of

  16. Injectability and mechanical properties of magnesium phosphate cements.

    Science.gov (United States)

    Moseke, Claus; Saratsis, Vasileios; Gbureck, Uwe

    2011-12-01

    Up to now magnesium phosphate cements are mainly being utilized in wastewater treatment due to their adsorptive properties. Recently they also have been shown to have a high potential as degradable biocements for application as replacement materials for bone defects. In comparison to degradable calcium phosphate cements they have the advantage of setting at neutral pH, which is favorable in biological environment. In this study two parameters of the cement composition, namely powder-to-liquid ratio (PLR) and citrate content, were varied in order to optimize the injectability properties of the cement paste and the mechanical properties of the reaction product. These properties were determined by means of testing setting time and temperature, paste viscosity, and injectability as well as phase composition and compressive strength of the set cements. Best results were obtained, when the cements were prepared with a PLR of 2.5 and a binder liquid consisting of an aqueous solution of 3 mol/l diammonium hydrogen phosphate and 0.5 mol/l diammonium citrate.

  17. Glass Fiber Reinforced Polypropylene Mechanical Properties Enhancement by Adhesion Improvement

    Directory of Open Access Journals (Sweden)

    Mariana Etcheverry

    2012-06-01

    Full Text Available Glass fibers (GF are the reinforcement agent most used in polypropylene (PP based composites, as they have good balance between properties and costs. However, their final properties are mainly determined by the strength and stability of the polymer-fiber interphase. Fibers do not act as an effective reinforcing material when the adhesion is weak. Also, the adhesion between phases can be easily degraded in aggressive environmental conditions such as high temperatures and/or elevated moisture, and by the stress fields to which the material may be exposed. Many efforts have been done to improve polymer-glass fiber adhesion by compatibility enhancement. The most used techniques include modifications in glass surface, polymer matrix and/or both. However, the results obtained do not show a good costs/properties improvement relationship. The aim of this work is to perform an accurate analysis regarding methods for GF/PP adhesion improvement and to propose a new route based on PP in-situ polymerization onto fibers. This route involves the modification of fibers with an aluminum alkyl and hydroxy-α-olefin and from there to enable the growth of the PP chains using direct metallocenic copolymerization. The adhesion improvements were further proved by fragmentation test, as well as by mechanical properties measurements. The strength and toughness increases three times and the interfacial strength duplicates in PP/GF composites prepared with in-situ polymerized fibers.

  18. Mechanical Properties of non-accreting Neutron Star Crusts

    CERN Document Server

    Hoffman, Kelsey

    2012-01-01

    The mechanical properties of a neutron star crust, such as breaking strain and shear modulus, have implications for the detection of gravitational waves from a neutron star as well as bursts from Soft Gamma-ray Repeaters (SGRs). These properties are calculated here for three different crustal compositions for a non-accreting neutron star that results from three different cooling histories, as well as for a pure iron crust. A simple shear is simulated using molecular dynamics to the crustal compositions by deforming the simulation box. The breaking strain and shear modulus are found to be similar in the four cases, with a breaking strain of ~0.1 and a shear modulus of ~10^{30} dyne cm^{-2} at a density of \\rho = 10^{14} g cm^{-3} for simulations with an initially perfect BCC lattice. With these crustal properties and the observed properties of {PSR J2124-3358} the predicted strain amplitude of gravitational waves for a maximally deformed crust is found to be greater than the observational upper limits from LIG...

  19. Mechanical Properties of Fiber Reinforced Lightweight Concrete Containing Surfactant

    Directory of Open Access Journals (Sweden)

    Yoo-Jae Kim

    2010-01-01

    Full Text Available Fiber reinforced aerated lightweight concrete (FALC was developed to reduce concrete's density and to improve its fire resistance, thermal conductivity, and energy absorption. Compression tests were performed to determine basic properties of FALC. The primary independent variables were the types and volume fraction of fibers, and the amount of air in the concrete. Polypropylene and carbon fibers were investigated at 0, 1, 2, 3, and 4% volume ratios. The lightweight aggregate used was made of expanded clay. A self-compaction agent was used to reduce the water-cement ratio and keep good workability. A surfactant was also added to introduce air into the concrete. This study provides basic information regarding the mechanical properties of FALC and compares FALC with fiber reinforced lightweight concrete. The properties investigated include the unit weight, uniaxial compressive strength, modulus of elasticity, and toughness index. Based on the properties, a stress-strain prediction model was proposed. It was demonstrated that the proposed model accurately predicts the stress-strain behavior of FALC.

  20. Investigation of tribological and mechanical properties of metal bearings

    Indian Academy of Sciences (India)

    Bekir Sadik Ünlü

    2009-08-01

    Copper, aluminum and tin–lead based alloys are widely used as journal bearing materials in tribological applications. Bronze and brass are widely used as journal bearing materials for copper based alloys. Zamacs find applications as journal bearing materials for zinc based alloys, while duralumines are chosen as journal bearing materials for aluminum based alloys. In addition, white metals are widely used as journal bearing materials for tin–lead based alloys. These alloys ensure properties expected from journal bearings. In this study, tribological and mechanical properties of these journal bearings manufactured by metals were investigated. SAE 1050 steel shaft was used as counter abrader. Experiments were carried out in every 30 min for a total of 150 min by using radial journal bearing wear test rig.

  1. Mechanical and Tribological Properties of Carbon-Based Graded Coatings

    Directory of Open Access Journals (Sweden)

    M. Kot

    2016-01-01

    Full Text Available The paper presents research on coatings with advanced architecture, composed of a Cr/Cr2N ceramic/metal multilayer and graded carbon layers with varying properties from Cr/a-C:H to a-C:N. The microstructure of the coatings was analysed using transmission electron microscopy and Energy Dispersive Spectroscopy, the mechanical properties were tested by nanoindentation, spherical indentation, and scratch testing, and tribological tests were also conducted. The proper selection of subsequent layers in graded coatings allowed high hardness and fracture resistance to be obtained as well as good adhesion to multilayers. Moreover, these coatings have higher wear resistance than single coatings and a friction coefficient equal to 0.25.

  2. Ferrosilt (Red Mud): Geotechnical Properties and Soil Mechanical Considerations

    Science.gov (United States)

    Jenny, F. C.

    The disposal of ferrosilt tailings creates problems because of the rather unusual geotechnical properties. Ferrosilt samples from three different bauxites were tested in connection with the alumina plant project in Wilhelmshaven (West Germany). The results of these laboratory tests explain various ferrosilt slides experienced during the past. Should ferrosilt be utilized for application where better physical qualities of the material are required it is possible to separate the coarser fraction from the finer fractions by using cyclons. The soil mechanical properties of the coarser fraction — called ferrosilt-sand — is of much better quality than the ferrosilt proper. On the other hand the quality of the finder fractions is not much inferior to the ferrosilt.

  3. Estimation of mechanical properties of nanomaterials using artificial intelligence methods

    Science.gov (United States)

    Vijayaraghavan, V.; Garg, A.; Wong, C. H.; Tai, K.

    2014-09-01

    Computational modeling tools such as molecular dynamics (MD), ab initio, finite element modeling or continuum mechanics models have been extensively applied to study the properties of carbon nanotubes (CNTs) based on given input variables such as temperature, geometry and defects. Artificial intelligence techniques can be used to further complement the application of numerical methods in characterizing the properties of CNTs. In this paper, we have introduced the application of multi-gene genetic programming (MGGP) and support vector regression to formulate the mathematical relationship between the compressive strength of CNTs and input variables such as temperature and diameter. The predictions of compressive strength of CNTs made by these models are compared to those generated using MD simulations. The results indicate that MGGP method can be deployed as a powerful method for predicting the compressive strength of the carbon nanotubes.

  4. Low-temperature mechanical properties of glass/epoxy laminates

    Science.gov (United States)

    Reed, R. P.; Madhukar, M.; Thaicharoenporn, B.; Martovetsky, N. N.

    2014-01-01

    Selected mechanical properties of glass/epoxy laminate candidates for use in the electrical turn and ground insulation of the ITER Central solenoid (CS) modules were measured. Short-beam shear and flexural tests have been conducted on various E-glass cloth weaves/epoxy laminates at 295 and 77 K. Types of glass weave include 1581, 7500, 7781, and 38050, which represent both satin and plain weaves. The epoxy, planned for use for vacuum-pressure impregnation of the CS module, consists of an anhydride-cured bisphenol F resin system. Inter-laminar shear strength, flexural elastic modulus, and flexural strength have been measured. The data indicate that these properties are dependent on the volume percent of glass. Short-beam shear strength was measured as a function of the span-to-thickness ratio for all laminates at 77 K. Comprehensive fractography was conducted to obtain the failure mode of each short-beam shear test sample.

  5. Quantum Mechanical Version of z-Transform Related to Eigenkets of Boson Creation Operator

    Institute of Scientific and Technical Information of China (English)

    FANHong-Yi; FULiang; A.Wiinsche

    2004-01-01

    Using the completeness relation composed of the coherent state and of the eigenket of bosonic creation operator, we establish a one-to-one correspondence between the z-transform and the quantum-mechanical transform from the representation by number states |n) to the representation by coherent states |(z)) (Bargmann representation).In this way, the quantum-mechanical version of the various properties of z-transform are obtained and the operators for embodying these properties in the Fock space are derived, which may find applications in quantum states engineering.

  6. Mechanical properties of several Fe-Ni meteorites

    Energy Technology Data Exchange (ETDEWEB)

    Mulford, Roberta N [Los Alamos National Laboratory; El - Dasher, Bassem [LLNL

    2010-10-28

    The strength and elastic constants of meteorites are of increasing interest as predictions of meteorite impacts on earth come within the realm of possibility. In addition, meteorite impacts on extraterrestrial bodies provide an excellent sampling tool for evaluation of planetary compositions and properties. Fe-Ni meteorites provide a well-defined group of materials of fairly uniform composition. Iron-nickel meteorites exhibit a unique lamellar microstructure, a Widmanstatten structure, consisting of small regions with steep-iron-nickel composition gradients. This microstructure is found in the Fe-Ni system only in meteorites, and is believed to arise as a result of slow cooling in a planetary core or other large mass. Meteorites with compositions consisting of between 5 and 17% nickel in iron are termed 'octahedrite,' and further characterized according to the width of the Ni-poor kamacite bands; 'fine,' (0.2-0.5 mm) 'medium,' (0.5-1.3 mm) and 'coarse,' (1.5-3.3 mm). Many meteorites have inclusions and structures indicating that the material has been shocked at some point early in its evolution. Several Iron-nickel meteorites have been examined using Vickers and spherical indentation, x-ray fluorescence, and EBSD. Direct observation of mechanical properties in these highly structured materials provides a valuable supplement to bulk measurements, which frequently exhibit large variation in dynamic properties, even within a single sample. Previous studies of the mechanical properties of a typical iron-nickel meteorite, a Diablo Canyon specimen, indicated that the strength of the composite was higher by almost an order of magnitude than values obtained from laboratory-prepared specimens. Additional meteorite specimens have been examined to establish a range of error on the previously measured yield, to determine the extent to which deformation upon re-entry contributes to yield, and to establish the degree to which the strength

  7. Scanning Probe Evaluation of Electronic, Mechanical and Structural Material Properties

    Science.gov (United States)

    Virwani, Kumar

    2011-03-01

    We present atomic force microscopy (AFM) studies of a range of properties from three different classes of materials: mixed ionic electronic conductors, low-k dielectrics, and polymer-coated magnetic nanoparticles. (1) Mixed ionic electronic conductors are being investigated as novel diodes to drive phase-change memory elements. Their current-voltage characteristics are measured with direct-current and pulsed-mode conductive AFM (C-AFM). The challenges to reliability of the C-AFM method include the electrical integrity of the probe, the sample and the contacts, and the minimization of path capacitance. The role of C-AFM in the optimization of these electro-active materials will be presented. (2) Low dielectric constant (low-k) materials are used in microprocessors as interlayer insulators, a role directly affected by their mechanical performance. The mechanical properties of nanoporous silicate low-k thin films are investigated in a comparative study of nanomechanics measured by AFM and by traditional nanoindentation. Both methods are still undergoing refinement as reliable analytical tools for determining nanomechanical properties. We will focus on AFM, the faster of the two methods, and its developmental challenges of probe shape, cantilever force constant, machine compliance and calibration standards. (3) Magnetic nanoparticles are being explored for their use in patterned media for magnetic storage. Current methods for visualizing the core-shell structure of polymer-coated magnetic nanoparticles include dye-staining the polymer shell to provide contrast in transmission electron microscopy. AFM-based fast force-volume measurements provide direct visualization of the hard metal oxide core within the soft polymer shell based on structural property differences. In particular, the monitoring of adhesion and deformation between the AFM tip and the nanoparticle, particle-by-particle, provides a reliable qualitative tool to visualize core-shell contrast without the use

  8. Genetic and environmental modification of the mechanical properties of wood

    Science.gov (United States)

    Sederoff, R.; Allona, I.; Whetten, R.

    1996-02-01

    Wood is one of the nation's leading raw materials and is used for a wide variety of products, either directly as wood, or as derived materials in pulp and paper. Wood is a biological material and evolved to provide mechanical support and water transport to the early plants that conquered the land. Wood is a tissue that results from the differentiation and programmed cell death of cells that derive from a tissue known as the vascular cambium. The vascular cambium is a thin cylinder of undifferentiated tissue in plant stems and roots that gives rise to several different cell types. Cells that differentiate on the internal side of the cambium form xylem, a tissue composed in major part, of long thin cells that die leaving a network of interconnected cell walls that serve to transport water and to provide mechanical support for the woody plant. The shape and chemical composition of the cells in xylem are well suited for these functions. The structure of cells in xylem determines the mechanical properties of the wood because of the strength derived from the reinforced matrix of the wall. The hydrophobic phenolic surface of the inside of the cell walls is essential to maintain surface tension upon which water transport is based and to resist decay caused by microorganisms. The properties of wood derived from the function of xylem also determine its structural and chemical properties as wood and paper products. Therefore, the physical and chemical properties of wood and paper products also depend on the morphology and composition of the cells from which they are derived. Wood (xylem cell walls) is an anisotropic material, a composite of lignocellulose. It is a matrix of cellulose microfibrils, complexed with hemicelluloses, (carbohydrate polymers which contain sugars other than glucose, both pentoses and hexoses), embedded together in a phenolic matrix of lignin. The high tensile strength of wood in the longitudinal direction, is due to the structure of cellulose and the

  9. Porosity and mechanical properties of porous titanium fabricated by gelcasting

    Institute of Scientific and Technical Information of China (English)

    LI Yan; GUO Zhimeng; HAO Junjie; REN Shubin

    2008-01-01

    Porous Ti compacts with large size and complex shape for biomedical applications were fabricated in the porosity range from 40.5% to 53.8% by controlling gelcasting parameters and sintering conditions. The experimental results show that the total porosity and open porosity of porous titanium compacts gelcast from the Ti slurry with 34 vol.% solid loading and sintered at 1100℃ for 1.5h are 46.5% and 40.7%, respectively, and the mechanical properties are as follows: compressive strength 158.6MPa and Young's modulus 8.5GPa, which are similar to those of human cortical bone and appropriate for implanting purpose.

  10. Microstructure and mechanical properties of neutron irradiated beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Ishitsuka, E.; Kawamura, H. [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Terai, T.; Tanaka, S.

    1998-01-01

    Microstructure and mechanical properties of the neutron irradiated beryllium with total fast neutron fluences of 1.3 - 4.3 x 10{sup 21} n/cm{sup 2} (E>1 MeV) at 327 - 616degC were studied. Swelling increased by high irradiation temperature, high fluence, and by the small grain size and high impurity. Obvious decreasing of the fracture stress was observed in the bending test and in small grain specimens which had many helium bubbles on the grain boundary. Decreasing of the fracture stress for small grain specimens was presumably caused by crack propagation on the grain boundaries which weekend by helium bubbles. (author)

  11. Mechanical Properties of Heat Exchanger Tube Materials at Elevated Temperatures

    Science.gov (United States)

    Kahl, Sören; Zajac, Jozefa; Ekström, Hans-Erik

    Since automotive heat exchangers are operated at elevated temperatures and under varying pressures, both static and dynamic mechanical properties should be known at the relevant temperatures. We have collected elevated-temperature tensile test data, elevated-temperature stress amplitude-fatigue life data, and creep-rupture data in a systematic fashion over the past years. For thin, soft, and braze-simulated heat exchanger tube materials tested inside closed furnaces, none of the well-established methods for crack detection and observation can be applied. In our contribution, we present a simple statistical method to estimate the time required for crack initiation.

  12. Mechanical and electrical properties of polycarbonate nanotube buckypaper composite sheets

    Energy Technology Data Exchange (ETDEWEB)

    Pham, Giang T; Park, Young-Bin; Wang Shiren; Liang Zhiyong; Wang Ben; Zhang, Chuck [High-Performance Materials Institute (HPMI), Department of Industrial and Manufacturing Engineering, Florida A and M University, Florida State University College of Engineering, 2525 Pottsdamer Street, Tallahassee, FL 32310-6046 (United States); Funchess, Percy; Kramer, Leslie [Lockheed Martin Missiles and Fire Control-Orlando, Orlando, FL 32819-8907 (United States)], E-mail: gte640q@yahoo.com

    2008-08-13

    The thermogravimetric, mechanical, and electrical properties of composite sheets produced by infiltrating single-wall carbon nanotube films (also known as 'buckypapers') with polycarbonate solution were characterized. The composite sheets showed improved stiffness and toughness, while the electrical conductivity decreased, as compared to a neat buckypaper. In addition, polycarbonate/buckypaper composite sheets showed higher resistance to handling and processing damages. Experimental results suggest the viability of the infiltration process as a means to toughen buckypapers and to fabricate polymer/carbon nanotube composites having high nanotube concentration and controlled nanotube structure.

  13. Mechanical and structural properties of sputtered Ni/Ti multilayers

    Energy Technology Data Exchange (ETDEWEB)

    Senthil Kumar, M.; Boeni, P.; Tixier, S.; Clemens, D.; Horisberger, M. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1997-09-01

    Ni/Ti bilayers have been prepared by dc-magnetron sputtering in order to study their mechanical and structural properties. A remarkable reduction of stress is observed when the Ni layers are sputtered reactively in argon with a high partial pressure of air. The high angle x-ray diffraction studies show a tendency towards amorphisation of the Ni layers with increasing air flow. The low angle measurements indicate a substantial reduction of interdiffusion resulting in smoother interfaces with increasing air content. (author) 2 figs., 2 refs.

  14. MICROSTRUCTURE AND MECHANICAL PROPERTIES OF NOVEL 718 SUPERALLOY

    Institute of Scientific and Technical Information of China (English)

    J.H. Du; X.D. Lü; J.L. Qu; Q. Deng; J.Y. Zhuang; Z.Y. Zhong

    2006-01-01

    Recently, a novel 718 superalloy with remarkable structural stability at 680℃ has been designed and fabricated by CISRI (Central Iron and Steel Research Institute) etc. Phase identification of novel 718 alloy under the above-mentioned heat-treatment condition was performed using optical microscopy (OM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Results show that the novel 718 alloy has outstanding structural stability at 680℃. The novel 718alloy possess excellent structural stability and good mechanical properties, which is attributed to y-phase strengthening and also to the specific sandwich structure of the γ′ + γ" strengthening phase.

  15. Mechanical Properties Optimization of Fiber Reinforced Foam Concrete

    Directory of Open Access Journals (Sweden)

    Yu Lei

    2016-01-01

    Full Text Available 3 factors including fiber kind, fiber content and fiber mix-ability are selected to optimizing mechanical properties of foam concrete. By orthogonal experiment design, compression and flexural stress and strain of specimens from different fiber added ways were test. Range analysis and factor levels analysis show the best fiber added way. Test shows that fiber content is the most important factor to flexural stress. Next one is fiber kind and the third is fiber mix-ability. Fiber kind is the most important factor to stress curves. Fiber is not good for compression strength but good for flexural strength.

  16. Electronic, mechanical and dielectric properties of silicane under tensile strain

    Energy Technology Data Exchange (ETDEWEB)

    Jamdagni, Pooja, E-mail: j.poojaa1228@gmail.com; Sharma, Munish; Ahluwalia, P. K. [Physics Department, Himachal Pradesh University, Shimla, Himachal Pradesh, India 171005 (India); Kumar, Ashok [Physics Department, Panjab University, Chandigarh, India, 160014 (India); Thakur, Anil [Physics Department, Govt. Collage Solan, Himachal Pradesh, India,173212 (India)

    2015-05-15

    The electronic, mechanical and dielectric properties of fully hydrogenated silicene i.e. silicane in stable configuration are studied by means of density functional theory based calculations. The band gap of silicane monolayer can be flexibly reduced to zero when subjected to bi-axial tensile strain, leading to semi-conducting to metallic transition, whereas the static dielectric constant for in-plane polarization increases monotonically with increasing strain. Also the EEL function show the red shift in resonance peak with tensile strain. Our results offer useful insight for the application of silicane monolayer in nano-optical and electronics devices.

  17. Physical and Mechanical Properties of Sorghum Grains (Sorghum Vulgare)

    OpenAIRE

    2016-01-01

    The physical and mechanical properties of sorghum grains (sorghum vulgare) were studied at varying moisture contents of 13%, 20% and 30% (w.b). The four varieties of sorghum grains studied include; Dura, Guinea, Faterita and Kafir. Results indicate that the size ranges were 3.94mm - 4.83mm for Dura variety; 3.75mm - 4.54mm for Guinea variety; 3.21mm - 4.42mm for Kafir variety and 2.70mm - 4.14mm for Faterita variety. Irregularities in the shapes of the grains were observed but all approximate...

  18. Influence of Carbonation on Mechanical Properties of Concrete

    Institute of Scientific and Technical Information of China (English)

    梁发云; 陈龙珠; 李检保

    2003-01-01

    As one of the most important factors that determine the lifespan of a reinforced concrete structure, car-bonation not only corrodes the reinforcing steel, but also changes the mechanical properties of concrete. For betterunderstanding the performance of carbonated concrete structure, it is necessary to study the mechanical propertiesof carbonated concrete. The strees-strain relationship of carbonated concrete was analyzed on the basis of experi-ments. The specimens were made by means of accelerated carbonation and then compressed on the testing ma-chine. Some very important characteristics of carbonated concrete were revealed by the testing results. In addition,a useful constitutive model of carbonated concrete, which proved to be suitable for analyzing carbonated concretemembers, was established in this research.

  19. Hydrodynamic interaction induced mechanical properties of SGF reinforced polyethersulfone

    Science.gov (United States)

    Munirathnamma, L. M.; Ningaraju, S.; Kumar, K. V. Aneesh; Ravikumar, H. B.

    2016-05-01

    In order to explore the effect of short glass fiber (SGF) reinforcement on the mechanical properties of Polyethersulfone (PES), short glass fibers of different proportion (10 - 40 wt %) are reinforced into PES matrix. The free volume distribution of SGFR-PES composites derived from CONTIN-PALS2 program exhibits the narrow full width at half maximum (FWHM). This is attributed to the improved adhesion resulted by the hydrodynamic interaction between the polymeric chains of PES matrix and SGF. The hydrodynamic interaction parameter (h) decreases as a function of SGF wt% and becomes more negative for 40 wt% SGFR-PES composites suggest the generation of excess friction at the interface. This improves the adhesion between the polymeric chains of PES matrix and SGF and hence the mechanical strength of the SGFR-PES composites.

  20. Structural and mechanical properties of Laponite-PEG hybrid films.

    Science.gov (United States)

    Shikinaka, Kazuhiro; Aizawa, Kazuto; Murakami, Yoshihiko; Osada, Yoshihito; Tokita, Masatoshi; Watanabe, Junji; Shigehara, Kiyotaka

    2012-03-01

    Inorganic/organic hybrids were obtained by the sol-gel type organic modification reaction of Laponite sidewalls with poly(ethylene glycol) (PEG) bearing alkoxysiloxy terminal functionality. By casting an aqueous dispersion of the hybrid, the flexible and transparent hybrid films were obtained. Regardless of the inorganic/organic component ratio, the hybrid film had the ordered structure of Laponite in-plane flat arrays. The mechanical strength of hybrid films was drastically improved by the presence of cross-linking among alkoxysilyl functionalities of PEG terminals and the absence of PEG crystallines. Hybrid films, especially those that consisted of PEG with short chain, showed good mechanical properties that originate from quasi-homogeneous dispersion of components due to anchoring of PEG terminal to Laponite sidewall and interaction of PEG to Laponite surface.

  1. Ab initio investigation of the mechanical properties of copper

    Institute of Scientific and Technical Information of China (English)

    Liu Yue-Lin; Gui Li-Jiang; Jin Shuo

    2012-01-01

    Employing the ab initio total energy method based on the density functional theory with the generalized gradient approximation,we have systematically investigated the theoretical mechanical properties of copper (Cu).The theoretical tensile strengths are calculated to be 25.3 GPa,5.9 GPa,and 37.6 GPa for the fcc Cu single crystal in the [001],[110],and [111] directions,respectively.Among the three directions,the [110] direction is the weakest one due to the occurrence of structure transition at the lower strain and the weakest interaction of atoms between the (110) planes,while the [111] direction is the strongest direction because of the strongest interaction of atoms between the (111) planes.In terms of the elastic constants of Cu single crystal,we also estimate some mechanical quantities of polycrystalline Cu,including bulk modulus B,shear modulus G,Young's modulus Ep,and Poisson's ratio v.

  2. Carbon nanotube heterojunctions: unusual deformations and mechanical vibration properties

    Science.gov (United States)

    Scarpa, F.; Narojczyk, J.; Wojciechowski, K. W.; Inman, D. J.

    2011-04-01

    The mechanical deformation and dynamics properties of single wall carbon nanotube heterojunctions (HJ) oscillators are investigated using an hybrid finite element atomistic-continuum approach. The nanotube HJs provide a peculiar deformation pattern, with combined bending and axial stretching of carbon nanotubes (CNTs), and a broad agreement of their axial stiffness with spring series continuum mechanics and existing molecular dynamics (MD) simulations. We show also peculiar distributions of the natural frequencies and modes of the hetero-junctions compared to classical single-wall nanotube configurations, and the mass-sensor capability of (5,5)-(10,10) SWCNT HJ structures, with frequency shifts highly depending on the heterojunction section subjected to the mass loading.

  3. Microstructure and Mechanical Properties of Graphene Oxide/Copper Composites

    Directory of Open Access Journals (Sweden)

    HONG Qi-hu

    2016-09-01

    Full Text Available Graphene oxide/copper (GO/Cu composites were successfully synthesized through the ball milling and vacuum hot press sintering process. The morphologies of the mixture powders, and the microstructure and mechanical properties of GO/Cu composites were investigated by OM, SEM, XRD, hardness tester and electronic universal testing machine, respectively. The results show that the GO/Cu composites are compact. Graphene oxide with flake morphology is uniformly dispersed and well consolidated with copper matrix. When the mass fraction of graphene oxide is 0.5%, the microhardness and compress strength at RT reach up to 63HV and 276MPa, increased by 8.6% and 28%, respectively. The strengthening mechanism is load transfer effect, dislocation strengthening and fine crystal reinforcing.

  4. The humidity sensing properties and mechanism of strontium-hexaferrite

    CERN Document Server

    Zhang, Hui-Feng; Shao, Gang-Qin; Gao, Zhen-Sheng; Liu, Jin-Hua; Girish, H -N

    2016-01-01

    The humidity sensing properties of n-type strontium-hexaferrite semiconductors are investigated at room temperature. The involved materials include hexaferrites of pure Z-type (Sr3Co2Fe24O41) and X-type (Sr2Co2Fe28O46) / W-type (SrCo2Fe16O27) mixture, in which Fe3+ / Fe2+ ions have different lattice sites. The contact and reactions between water and material surface are demonstrated considering the formation of oxide ion vacancy, singly-ionized / fully-ionized oxide ion vacancy, and the chemisorbed / physisorbed / condensed water. An impedance spectra model is proposed considering the material-electrode interface, interior material, grain boundary, absorbed water and Warburg response. The mechanism of electronic coupled with protonic conduction and humidity sensing mechanism are explained.

  5. Macroporous hydrogels with tailored morphology and mechanical properties

    Science.gov (United States)

    Bignotti, Fabio; Agnelli, Silvia; Baldi, Francesco; Sartore, Luciana; Peroni, Isabella

    2016-05-01

    In this work it is shown that hydroxyethylcellulose (HEC) can be employed for preparing macroporous polyacrylamide (PAAm) hydrogels with tailored morphology and mechanical properties. By changing the HEC content in the reaction mixture hydrogels with different pore sizes and degrees of interconnectivity can be synthesized. The equilibrium swelling ratio in 0.1 M NaCl increases with the amount of HEC employed. Tensile tests run on equilibrated hydrogels show that these materials behave as rubber-like materials. Their mechanical stiffness decreases regularly as the amount of HEC, and therefore their porosity, is increased. A more complex trend is observed for elongation and stress at break, which display a maximum at intermediate contents of HEC.

  6. Mechanical Properties of Man-Made Mineral glass fibres

    DEFF Research Database (Denmark)

    Lund, Majbritt Deichgræber; Yue, Yuanzheng

    ; man-made mineral glass fibres. The basaltic melt is prevented from crystallizing due to the high cooling rate, forming the mineral glass wool fibres. Basaltic mineral wool fibres are of high interest in industry due to their good chemical durability and excellent heat and sound insulation properties...... and hence they are used for insulation products. In spite of those advantages, man made mineral wool fibres still show a certain degree of brittleness, which limits the further improvement of man made mineral wool fibres for both transportation and application. Therefore, a reduction in the brittleness...... of man made mineral wool fibres, and an improvement of the mechanical performances of man made mineral wool fibres are an evitable task for us. To do so, it is important to look into the fracture behaviour and its connection to the mechanical strength. In order to improve the understanding...

  7. Mechanical properties of silver matrix composites reinfroced with ceramic particles

    Directory of Open Access Journals (Sweden)

    J. Śleziona

    2006-04-01

    Full Text Available Purpose: Silver, silver alloys, as well as silver matrix based composites have been well known and applied in the electrotechnical and electronics industry for several decades. For many applications in electrotechnology, including electric contacts and brushes, unreinforced sliver alloys do not meet the requirements concerning mainly durability and wear resistance, first of all to tribological and electroerosive wear. These wear processes may be prevented by introducing to silver reinforcement particles and alloys. The target of the research included basic mechanical properties determination of the silver matrix composites reinforced with ceramic particles, manufactured with the use of suspension methods.Design/methodology/approach: In the presented paper the authors demonstrate possibilities of manufacturing of silver matrix composites on the way of casting technology utilization.Findings: The results of the research prove that applied suspension technology, based on introducing of agglomerated foundry alloy which is the carrier for reinforcement particles (SiC lub Al2O3 allows to produce in an effective and, what is important, in an economically attractive way, sliver alloys based composites.Research limitations/implications: The researches on the structure of manufactured composites and their mechanical properties that are presented in the paper prove the possibilities of mechanical mixing technology application for producing mechanical and stable connection between silver matrix and ceramic particles of aluminium oxide and silicon carbide.Originality/value: The manufacturing of this type of composites is based most of all on the utilization of powder metallurgy techniques. However the obtained results of the research prove that there is a possibility of silver matrix composites forming in the casting and plastic working processes. Extrusion process carried out in the hydraulic press KOBO has its favourably influence on ceramic reinforcement

  8. Restricting the ageing degradation of the mechanical properties of gamma irradiated UHMWPE using MWCNTs.

    Science.gov (United States)

    Rama Sreekanth, P S; Kanagaraj, S

    2013-05-01

    Property degradation of the medical grade polymers after gamma irradiation is the primary concern that limits longevity of them. Though the conventional antioxidant material helps to reduce the degradation but it limits the degree of crosslinking of the polymer. The objective of the present work is to study the influence of multi walled carbon nanotubes (MWCNTs) on restricting the degradation of mechanical properties of medical grade ultra high molecular weight polyethylene (UHMWPE) after its irradiation. UHMWPE was reinforced by chemically treated MWCNTs at different concentrations such as 0.5, 1.0, 1.5, and 2.0 wt%. The test samples were then subjected to Co⁶⁰ gamma irradiation with an integral dose of 25, 50, 75 and 100 kGy in air. The mechanical properties of irradiated samples were evaluated within 10 days, 60 and 120 days after irradiation. It was observed that the mechanical properties of virgin UHMWPE and nanocomposites were enhanced immediately after irradiation but they were found to be reduced at later stages. It was also observed that the presence of MWCNTs limited the ageing degradation of the mechanical properties of UHMWPE. Raman spectroscopic and TEM studies confirmed the formation of irradiation induced defects on the MWCNTs. Electron spin resonance studies showed that the relative radical intensity of virgin UHWMPE was reduced significantly with an increase of MWCNTs concentration confirming the radical scavenging ability of them. It is concluded that MWCNTs restricted the ageing degradation of irradiated UHMWPE.

  9. Influence of cross-link structure, density and mechanical properties in the mesoscale deformation mechanisms of collagen fibrils.

    Science.gov (United States)

    Depalle, Baptiste; Qin, Zhao; Shefelbine, Sandra J; Buehler, Markus J

    2015-12-01

    Collagen is a ubiquitous protein with remarkable mechanical properties. It is highly elastic, shows large fracture strength and enables substantial energy dissipation during deformation. Most of the connective tissue in humans consists of collagen fibrils composed of a staggered array of tropocollagen molecules, which are connected by intermolecular cross-links. In this study, we report a three-dimensional coarse-grained model of collagen and analyze the influence of enzymatic cross-links on the mechanics of collagen fibrils. Two representatives immature and mature cross-links are implemented in the mesoscale model using a bottom-up approach. By varying the number, type and mechanical properties of cross-links in the fibrils and performing tensile test on the models, we systematically investigate the deformation mechanisms of cross-linked collagen fibrils. We find that cross-linked fibrils exhibit a three phase behavior, which agrees closer with experimental results than what was obtained using previous models. The fibril mechanical response is characterized by: (i) an initial elastic deformation corresponding to the collagen molecule uncoiling, (ii) a linear regime dominated by molecule sliding and (iii) the second stiffer elastic regime related to the stretching of the backbone of the tropocollagen molecules until the fibril ruptures. Our results suggest that both cross-link density and type dictate the stiffness of large deformation regime by increasing the number of interconnected molecules while cross-links mechanical properties determine the failure strain and strength of the fibril. These findings reveal that cross-links play an essential role in creating an interconnected fibrillar material of tunable toughness and strength.

  10. Mechanical properties of monocrystalline and polycrystalline monolayer black phosphorus

    Science.gov (United States)

    Cao, Pinqiang; Wu, Jianyang; Zhang, Zhisen; Ning, Fulong

    2017-01-01

    The mechanical properties of monocrystalline and polycrystalline monolayer black phosphorus (MBP) are systematically investigated using classic molecular dynamic simulations. For monocrystalline MBP, it is found that the shear strain rate, sample dimensions, temperature, atomic vacancies and applied statistical ensemble affect the shear behaviour. The wrinkled morphology is closely connected with the direction of the in-plane shear, dimensions of the samples, and applied ensembles. Particularly, small samples subjected to loading/unloading of the shear deformation along the armchair direction demonstrate a clear mechanical hysteresis loop. For polycrystalline MBP, the maximum shear stress as a function of the average grain size follows an inverse pseudo Hall-Petch type relationship under an isothermal-isobaric (NPT) ensemble, whereas under a canonical (NVT) ensemble, the maximum shear stress of polycrystalline MBP exhibits a ‘flipped’ behaviour. Furthermore, polycrystalline MBP subjected to uniaxial tension also exhibits a strongly grain size-dependent mechanical response, and it can fail by brittle intergranular and transgranular fractures because of its weaker grain boundary structures and the direction-dependent edge energy, respectively. These findings provide useful insight into the mechanical design of BP for nanoelectronic devices.

  11. Dynamic thermo-mechanical properties of various flowable resin composites

    Science.gov (United States)

    Balthazard, Rémy; Vincent, Marin; Dahoun, Abdessellam; Mortier, Eric

    2016-01-01

    Background This study compared the storage modulus (E’), the loss modulus (E’’) and the loss tangent (tan δ) of various flowable resin composites. Material and Methods Grandio Flow (GRF), GrandioSo Heavy Flow (GHF), Filtek Supreme XTE (XTE) and Filtek Bulk Fill (BUL) flowable resins and Clinpro Sealant (CLI) ultra-flowable pit and fissure sealant resin were used. 25 samples were tested using a dynamical mechanical thermal analysis system in bending mode. Measurements were taken within a temperature range of 10 to 55°C. The results were statistically analyzed using mixed-effect and repeated-measure analysis of variance followed by paired multiple comparisons. Results For all the materials, the E’ values decrease with temperature, whereas the tan δ values increase. Irrespective of the temperature, GHF and GRF present E’ and E’’ values significantly higher than all the other materials and CLI presents values significantly lower than all the other materials. Observation of the values for all the materials reveals a linear progression of the tan δ values with temperature. Conclusions A variation in temperature within a physiological range generates modifications in mechanical properties without damaging the material, however. Filler content in volume terms appears to be the crucial parameter in the mechanical behavior of tested materials. Key words:Dynamic mechanical thermal analysis, elastic modulus, filler content, flowable resin composites, loss modulus, loss tangent. PMID:27957266

  12. Properties and mechanisms of olfactory learning and memory.

    Science.gov (United States)

    Tong, Michelle T; Peace, Shane T; Cleland, Thomas A

    2014-01-01

    Memories are dynamic physical phenomena with psychometric forms as well as characteristic timescales. Most of our understanding of the cellular mechanisms underlying the neurophysiology of memory, however, derives from one-trial learning paradigms that, while powerful, do not fully embody the gradual, representational, and statistical aspects of cumulative learning. The early olfactory system-particularly olfactory bulb-comprises a reasonably well-understood and experimentally accessible neuronal network with intrinsic plasticity that underlies both one-trial (adult aversive, neonatal) and cumulative (adult appetitive) odor learning. These olfactory circuits employ many of the same molecular and structural mechanisms of memory as, for example, hippocampal circuits following inhibitory avoidance conditioning, but the temporal sequences of post-conditioning molecular events are likely to differ owing to the need to incorporate new information from ongoing learning events into the evolving memory trace. Moreover, the shapes of acquired odor representations, and their gradual transformation over the course of cumulative learning, also can be directly measured, adding an additional representational dimension to the traditional metrics of memory strength and persistence. In this review, we describe some established molecular and structural mechanisms of memory with a focus on the timecourses of post-conditioning molecular processes. We describe the properties of odor learning intrinsic to the olfactory bulb and review the utility of the olfactory system of adult rodents as a memory system in which to study the cellular mechanisms of cumulative learning.

  13. Properties and mechanisms of olfactory learning and memory

    Directory of Open Access Journals (Sweden)

    Michelle T Tong

    2014-07-01

    Full Text Available Memories are dynamic physical phenomena with psychometric forms as well as characteristic timescales. Most of our understanding of the cellular mechanisms underlying the neurophysiology of memory, however, derives from one-trial learning paradigms that, while powerful, do not fully embody the gradual, representational, and statistical aspects of cumulative learning. The early olfactory system -- particularly olfactory bulb -- comprises a reasonably well-understood and experimentally accessible neuronal network with intrinsic plasticity that underlies both one-trial (adult aversive, neonatal and cumulative (adult appetitive odor learning. These olfactory circuits employ many of the same molecular and structural mechanisms of memory as, for example, hippocampal circuits following inhibitory avoidance conditioning, but the temporal sequences of post-conditioning molecular events are likely to differ owing to the need to incorporate new information from ongoing learning events into the evolving memory trace. Moreover, the shapes of acquired odor representations, and their gradual transformation over the course of cumulative learning, also can be directly measured, adding an additional representational dimension to the traditional metrics of memory strength and persistence. In this review, we describe some established molecular and structural mechanisms of memory with a focus on the timecourses of post-conditioning molecular processes. We describe the properties of odor learning intrinsic to the olfactory bulb and review the utility of the olfactory system of adult rodents as a memory system in which to study the cellular mechanisms of cumulative learning.

  14. Mechanical properties of organic semiconductors for mechanically stable and intrinsically stretchable solar cells (Conference Presentation)

    Science.gov (United States)

    Lipomi, Darren J.

    2016-09-01

    This presentation describes my group's efforts to understand the molecular and microstructural basis for the mechanical properties of organic semiconductors for organic photovoltaic (OPV) devices. Our work is motivated by two goals. The first goal is to mitigate mechanical forms of degradation of printed modules during roll-to-roll fabrication, installation, and environmental forces—i.e., wind, rain, snow, and thermal expansion and contraction. Mechanical stability is a prerequisite for inexpensive processing on flexible substrates: to encapsulate devices in glass is to surrender this advantage. The second goal is to enable the next generation of ultra-flexible and stretchable solar cells for collapsible, portable, and wearable applications, and as low-cost sources of energy—"solar tarps"—for disaster relief and for the developing world. It may seem that organic semiconductors, due to their carbon framework, are already sufficiently compliant for these applications. We have found, however, that the mechanical properties (stiffness and brittleness) occupy a wide range of values, and can be difficult to predict from molecular structure alone. We are developing an experimental and theoretical framework for how one can combine favorable charge-transport properties and mechanical compliance in organic semiconductor films. In particular, we have explored the roles of the backbone, alkyl side chain, microstructural order, the glass transition, molecular packing with fullerenes, plasticizing effects of additives, extent of separation of [60]PCBM and [70]PCBM, structural randomness in low-bandgap polymers, and reinforcement by encapsulation, on the mechanical compliance. We are exploring the applicability of semi-empirical "back-of-the-envelope" models, along with multi-scale molecular dynamics simulations, with the ultimate goal of designing electroactive organic materials whose mechanical properties can be dialed-in. We have used the insights we have developed to

  15. Increased Mechanical Properties Through the Addition of Zr to GRCop-84

    Science.gov (United States)

    Ellis, David L.; Lerch, Bradley A.

    2011-01-01

    GRCop-84 (Cu-8 at.% Cr-4 at.% Nb) has shown exceptional mechanical properties above 932 F (773 K). However, its properties below 932 F (773 K) are inferior to precipitation strengthened alloys such as Cu-Cr, Cu-Zr and Cu-Cr-Zr when they are in the fully aged, hard-drawn condition. It has been noted that the addition of small amounts of Zr, typically 0.1 wt.% to 0.5 wt.%, can greatly enhance the mechanical properties of copper-based alloys. Limited testing was conducted upon GRCop-84 with an addition of 0.4 wt.% Zr to determine its tensile, creep and low cycle fatigue (LCF) properties. Very large increases in strength (up to 68%) and ductility (up to 123%) were observed at both room temperature and 932 F (773 K). Creep properties at 932 F (773 K) demonstrated more than an order of magnitude decrease in the creep rate relative to unmodified GRCop-84 with a corresponding order of magnitude increase in creep life. Limited LCF testing showed that the modified alloy had a comparable LCF life at room temperature, but it was capable of sustaining a much higher load. While more testing and composition optimization are required, the addition of Zr to GRCop-84 has shown clear benefits to mechanical properties.

  16. Tensors the mathematics of relativity and continuum mechanics

    CERN Document Server

    Das, A J

    2007-01-01

    Tensors: The Mathematics of Relativity Theory and Continuum Mechanics, by Anadijiban Das, emerged from courses taught over the years at the University College of Dublin, Carnegie-Mellon University and Simon Fraser University. This book will serve readers well as a modern introduction to the theories of tensor algebra and tensor analysis. Throughout Tensors, examples and worked-out problems are furnished from the theory of relativity and continuum mechanics. Topics covered in this book include, but are not limited to: -tensor algebra -differential manifold -tensor analysis -differential forms -connection forms -curvature tensors -Riemannian and pseudo-Riemannian manifolds The extensive presentation of the mathematical tools, examples and problems make the book a unique text for the pursuit of both the mathematical relativity theory and continuum mechanics.

  17. Inflammation and Epidural-Related Maternal Fever: Proposed Mechanisms.

    Science.gov (United States)

    Sultan, Pervez; David, Anna L; Fernando, Roshan; Ackland, Gareth L

    2016-05-01

    Intrapartum fever is associated with excessive maternal interventions as well as higher neonatal morbidity. Epidural-related maternal fever (ERMF) contributes to the development of intrapartum fever. The mechanism(s) for ERMF has remained elusive. Here, we consider how inflammatory mechanisms may be modulated by local anesthetic agents and their relevance to ERMF. We also critically reappraise the clinical data with regard to emerging concepts that explain how anesthetic drug-induced metabolic dysfunction, with or without activation of the inflammasome, might trigger the release of nonpathogenic, inflammatory molecules (danger-associated molecular patterns) likely to underlie ERMF.

  18. Scaling relations for galaxy clusters: Properties and evolution

    NARCIS (Netherlands)

    Giodini, S.; Lovisari, L.; Pointecouteau, E.; Ettori, S.; Reiprich, T.H.; Hoekstra, H.

    2013-01-01

    Well-calibrated scaling relations between the observable properties and the total masses of clusters of galaxies are important for understanding the physical processes that give rise to these relations. They are also a critical ingredient for studies that aim to constrain cosmological parameters usi

  19. Mechanical Properties and Transformation Behavior of NiTiNb Shape Memory Alloys

    Institute of Scientific and Technical Information of China (English)

    Liu Wei; Zhao Xinqing

    2009-01-01

    NiTiNb shape memory alloys have attracted much attention in pipe coupling or sealing system because of their large transformation hysteresis upon a proper pre-deformation. In order to clarify the effects of adding Nb on the mechanical properties as well as the transformation behavior of NiTiNb shape memory alloys, Ni_(47)Ti_(44)Nb_9 and Ni_(49.8)Ti_(45.2)Nb_5 alloys with different microstructures but with similar martensitic transformation start temperature, are prepared. Comparative studies on the microstructures, mechanical properties and transformation characteristics are conducted by means of scanning electron microscopy (SEM), phase transformation measurements and mechanical property tests. It is found that Ni_(47)Ti_(44)Nb_9 and Ni49.8Ti45.2Nb5 alloys possess similar transformation hysteresis in the as-annealed state. However, the presence of Nb and its status exerts important effects on the mechanical properties, especially the yield strength and the yield behavior of the alloys. Ni_(49.8)Ti_(45.2)Nb_5 alloy exhibits remarkable increase in the yield strength than the Ni_(47)Ti_(44)Nb_9 alloy. The transformation hysteresis of both alloys under pre-deformation is characterized and the relative mechanism is discussed.

  20. Hypothesised mechanisms of swimming-related death: a systematic review.

    Science.gov (United States)

    Asplund, Chad A; Creswell, Lawrence L

    2016-11-01

    Recent reports from triathlon and competitive open-water swimming indicate that these events have higher rates of death compared with other forms of endurance sport. The potential causal mechanism for swimming-related death is unclear. To examine available studies on the hypothesised mechanisms of swimming-related death to determine the most likely aetiologies. MEDLINE, EMBASE and the Cochrane Database of Systematic Reviews (1950 to present) were searched, yielding 1950 potential results, which after title and citation reviews were reduced to 83 possible reports. Studies included discussed mechanisms of death during swimming in humans, and were Level 4 evidence or higher. A total of 17 studies (366 total swimmers) were included for further analysis: 5 investigating hyperthermia/hypothermia, 7 examining cardiac mechanisms and responses, and 5 determining the presence of pulmonary edema. The studies provide inconsistent and limited-quality or disease-oriented evidence that make definitive conclusions difficult. The available evidence is limited but may suggest that cardiac arrhythmias are the most likely aetiology of swimming-related death. While symptoms of pulmonary edema may occur during swimming, current evidence does not support swimming-induced pulmonary edema as a frequent cause of swimming-related death, nor is there evidence to link hypothermia or hyperthermia as a causal mechanism. Further higher level studies are needed. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.