Production of Fatty Acid-Derived Valuable Chemicals in Synthetic Microbes

International Nuclear Information System (INIS)

Yu, Ai-Qun; Pratomo Juwono, Nina Kurniasih; Leong, Susanna Su Jan; Chang, Matthew Wook

2014-01-01

Fatty acid derivatives, such as hydroxy fatty acids, fatty alcohols, fatty acid methyl/ethyl esters, and fatty alka(e)nes, have a wide range of industrial applications including plastics, lubricants, and fuels. Currently, these chemicals are obtained mainly through chemical synthesis, which is complex and costly, and their availability from natural biological sources is extremely limited. Metabolic engineering of microorganisms has provided a platform for effective production of these valuable biochemicals. Notably, synthetic biology-based metabolic engineering strategies have been extensively applied to refactor microorganisms for improved biochemical production. Here, we reviewed: (i) the current status of metabolic engineering of microbes that produce fatty acid-derived valuable chemicals, and (ii) the recent progress of synthetic biology approaches that assist metabolic engineering, such as mRNA secondary structure engineering, sensor-regulator system, regulatable expression system, ultrasensitive input/output control system, and computer science-based design of complex gene circuits. Furthermore, key challenges and strategies were discussed. Finally, we concluded that synthetic biology provides useful metabolic engineering strategies for economically viable production of fatty acid-derived valuable chemicals in engineered microbes.

Production of Fatty Acid-Derived Valuable Chemicals in Synthetic Microbes

Energy Technology Data Exchange (ETDEWEB)

Yu, Ai-Qun; Pratomo Juwono, Nina Kurniasih [Department of Biochemistry, Yong Loo Lin School of Medicine, National University of Singapore, Singapore (Singapore); Synthetic Biology Research Program, National University of Singapore, Singapore (Singapore); Leong, Susanna Su Jan [Department of Biochemistry, Yong Loo Lin School of Medicine, National University of Singapore, Singapore (Singapore); Synthetic Biology Research Program, National University of Singapore, Singapore (Singapore); Singapore Institute of Technology, Singapore (Singapore); Chang, Matthew Wook, E-mail: bchcmw@nus.edu.sg [Department of Biochemistry, Yong Loo Lin School of Medicine, National University of Singapore, Singapore (Singapore); Synthetic Biology Research Program, National University of Singapore, Singapore (Singapore)

2014-12-23

Fatty acid derivatives, such as hydroxy fatty acids, fatty alcohols, fatty acid methyl/ethyl esters, and fatty alka(e)nes, have a wide range of industrial applications including plastics, lubricants, and fuels. Currently, these chemicals are obtained mainly through chemical synthesis, which is complex and costly, and their availability from natural biological sources is extremely limited. Metabolic engineering of microorganisms has provided a platform for effective production of these valuable biochemicals. Notably, synthetic biology-based metabolic engineering strategies have been extensively applied to refactor microorganisms for improved biochemical production. Here, we reviewed: (i) the current status of metabolic engineering of microbes that produce fatty acid-derived valuable chemicals, and (ii) the recent progress of synthetic biology approaches that assist metabolic engineering, such as mRNA secondary structure engineering, sensor-regulator system, regulatable expression system, ultrasensitive input/output control system, and computer science-based design of complex gene circuits. Furthermore, key challenges and strategies were discussed. Finally, we concluded that synthetic biology provides useful metabolic engineering strategies for economically viable production of fatty acid-derived valuable chemicals in engineered microbes.

New Therapies Offer Valuable Options for Patients with Melanoma

Science.gov (United States)

Two phase III clinical trials of new therapies for patients with metastatic melanoma presented in June at the 2011 ASCO conference confirmed that vemurafenib and ipilimumab (Yervoy™) offer valuable new options for the disease.

A case report on inVALUABLE: insect value chain in a circular bioeconomy

DEFF Research Database (Denmark)

Heckmann, L.-H.; Andersen, J.L.; Eilenberg, J.

2018-01-01

partners span the entire value chain and include entrepreneurs, experts in biology, biotechnology, automation, processing and food tech and safety. This paper provides an overview of the goal, activities and some preliminary results obtained during the first year of the project.......The vision of inVALUABLE is to create a sustainable resource-efficient industry for animal production based on insects. inVALUABLE has focus on the R&D demand for scaling up production of insects in Denmark and assessing the application potential of particularly mealworms. The inVALUABLE consortium...

Animals as an indicator of carbon sequestration and valuable landscapes

Directory of Open Access Journals (Sweden)

Jan Szyszko

2011-05-01

Full Text Available Possibilities of the assessment of a landscape with the use of succession development stages, monitored with the value of the Mean Individual Biomass (MIB of carabid beetles and the occurrence of bird species are discussed on the basis of an example from Poland. Higher variability of the MIB value in space signifies a greater biodiversity. Apart from the variability of MIB, it is suggested to adopt the occurrence of the following animals as indicators, (in the order of importance, representing underlying valuable landscapes: black stork, lesser spotted eagle, white-tailed eagle, wolf, crane and white stork. The higher number of these species and their greater density indicate a higher value of the landscape for biodiversity and ecosystem services, especially carbon sequestration. All these indicators may be useful to assess measures for sustainable land use.

A Study on Brexit: Correlations and Tail Events Distribution of Liquidity Measures

OpenAIRE

Mingyuan Kong; Amin Salighehdar; Dragos Bozdog

2018-01-01

Liquidity describes the degree to which an asset or security can be quickly bought or sold in the market without affecting the asset's price. In this study, some of the existing liquidity measures are studied and analyzed during Brexit. We examine Utilities Select Sector SPDR Fund (Exchange-Traded Fund) components in this study. The time period covers June 16, 2016 to June 30, 2016 which includes Brexit event day. We use high-frequency tick level Trade data, Quote data, and Limit Order Book d...

Measured parental height in Turner syndrome-a valuable but underused diagnostic tool.

Science.gov (United States)

Ouarezki, Yasmine; Cizmecioglu, Filiz Mine; Mansour, Chourouk; Jones, Jeremy Huw; Gault, Emma Jane; Mason, Avril; Donaldson, Malcolm D C

2018-02-01

Early diagnosis of Turner syndrome (TS) is necessary to facilitate appropriate management, including growth promotion. Not all girls with TS have overt short stature, and comparison with parental height (Ht) is needed for appropriate evaluation. We examined both the prevalence and diagnostic sensitivity of measured parental Ht in a dedicated TS clinic between 1989 and 2013. Lower end of parental target range (LTR) was calculated as mid-parental Ht (correction factor 12.5 cm minus 8.5 cm) and converted to standard deviation scores (SDS) using UK 1990 data, then compared with patient Ht SDS at first accurate measurement aged > 1 year. Information was available in 172 girls of whom 142 (82.6%) were short at first measurement. However, both parents had been measured in only 94 girls (54.6%). In 92 of these girls age at measurement was 6.93 ± 3.9 years, Ht SDS vs LTR SDS - 2.63 ± 0.94 vs - 1.77 ± 0.81 (p Turner syndrome are short in relation to parental heights, with untreated final height approximately 20 cm below female population mean. • Measured parental height is more accurate than reported height. What is New: • In a dedicated Turner clinic, there was 85% sensitivity when comparing patient height standard deviation score at first accurate measurement beyond 1 year of age with the lower end of the parental target range standard deviation. • However, measured height in both parents had been recorded in only 54.6% of the Turner girls attending the clinic. This indicates the need to improve the quality of growth assessment in tertiary care.

Novel extractants with high selectivity for valuable metals in seawater. Calixarene derivatives

International Nuclear Information System (INIS)

Kakoi, Takahiko; Goto, Masahiro

1997-01-01

Seawater contains various valuable metals such as uranium and lithium. Therefore, attempts are being made to develop highly selective extractants which recognize target metal ions in reclaimed seawater. In this review, we have focused our study on the application of novel cyclic compound calixarene based extractants. A novel host compound calixarene, which is a cyclic compound connecting some phenol rings, is capable of forming several different extractant ring sizes and introducing various kinds of functional groups towards targeting of metal ions in seawater. Therefore, calixarene derivatives are capable of extracting valuable metals such as uranium, alkaline metals, heavy metals, rare earth metals and noble metals selectively by varying structural ring size and functional groups. The novel host compound calixarene has given promising results which line it up as a potential extractant for the separation of valuable metal ions in seawater. (author)

Field Trips as Valuable Learning Experiences in Geography Courses

Science.gov (United States)

Krakowka, Amy Richmond

2012-01-01

Field trips have been acknowledged as valuable learning experiences in geography. This article uses Kolb's (1984) experiential learning model to discuss how students learn and how field trips can help enhance learning. Using Kolb's experiential learning theory as a guide in the design of field trips helps ensure that field trips contribute to…

MVT a most valuable theorem

CERN Document Server

Smorynski, Craig

2017-01-01

This book is about the rise and supposed fall of the mean value theorem. It discusses the evolution of the theorem and the concepts behind it, how the theorem relates to other fundamental results in calculus, and modern re-evaluations of its role in the standard calculus course. The mean value theorem is one of the central results of calculus. It was called “the fundamental theorem of the differential calculus” because of its power to provide simple and rigorous proofs of basic results encountered in a first-year course in calculus. In mathematical terms, the book is a thorough treatment of this theorem and some related results in the field; in historical terms, it is not a history of calculus or mathematics, but a case study in both. MVT: A Most Valuable Theorem is aimed at those who teach calculus, especially those setting out to do so for the first time. It is also accessible to anyone who has finished the first semester of the standard course in the subject and will be of interest to undergraduate mat...

Assessment of Itakura Distance as a valuable feature for computer-aided classification of sleep stages.

Science.gov (United States)

Ebrahimi, F; Mikaili, M; Estrada, E; Nazeran, H

2007-01-01

Staging and detection of various states of sleep derived from EEG and other biomedical signals have proven to be very helpful in diagnosis, prognosis and remedy of various sleep related disorders. The time consuming and costly process of visual scoring of sleep stages by a specialist has always motivated researchers to develop an automatic sleep scoring system and the first step toward achieving this task is finding discriminating characteristics (or features) for each stage. A vast variety of these features and methods have been investigated in the sleep literature with different degrees of success. In this study, we investigated the performance of a newly introduced measure: the Itakura Distance (ID), as a similarity measure between EEG and EOG signals. This work demonstrated and further confirmed the outcomes of our previous research that the Itakura Distance serves as a valuable similarity measure to differentiate between different sleep stages.

Salt Lakes of the African Rift System: A Valuable Research ...

African Journals Online (AJOL)

Salt Lakes of the African Rift System: A Valuable Research Opportunity for Insight into Nature's Concenrtated Multi-Electrolyte Science. JYN Philip, DMS Mosha. Abstract. The Tanzanian rift system salt lakes present significant cultural, ecological, recreational and economical values. Beyond the wealth of minerals, resources ...

Holland bought Slovakian's emission quotas

International Nuclear Information System (INIS)

TREND

2003-01-01

It is not a direct trade but more an environmental investment. Dutch government decided to buy over 5 million tons of carbon dioxide emission quotas of Rumania, Hungary and Slovakia. But this is not a direct purchase; it is related to investments into major projects that would decrease emission of greenhouse gases in the mentioned countries. Holland will improve its emission balance set by Kyoto Protocol and 'on the other hand we will offer eastern European countries technologies they are missing,' explained the main objectives of Dutch environmental projects Erik Saat from Senter agency at Dutch Ministry of Economy. The Dutch agency has so far selected one project in Slovakia - absorption of methane gas on waste dumps of eight Slovak towns. This project in value of 5 million Euro will decrease the emission by an equivalent of 500 thousand tons of CO 2 . Slovak Ministry of Environment that has to approve these projects welcomes any activity that would lead to decreasing greenhouse gas pollution. Every three months Senter agency select the best projects submitted in order to fulfil the commitments resulting from Kyoto Protocol. (Author)

an assessment of timber trees producing valuable fruits and seeds ...

African Journals Online (AJOL)

User

It is observed that most of the timber trees producing valuable fruits and seeds have low ... sector of the economy by providing major raw materials (saw logs, ... the trees also produce industrial raw materials like latex, ... villagers while avoiding some of the ecological costs of ..... enzymes of rats with carbon tetrachloride.

Recovering valuable metals from recycled photovoltaic modules.

Science.gov (United States)

Yi, Youn Kyu; Kim, Hyun Soo; Tran, Tam; Hong, Sung Kil; Kim, Myong Jun

2014-07-01

Recovering valuable metals such as Si, Ag, Cu, and Al has become a pressing issue as end-of-life photovoltaic modules need to be recycled in the near future to meet legislative requirements in most countries. Of major interest is the recovery and recycling of high-purity silicon (> 99.9%) for the production of wafers and semiconductors. The value of Si in crystalline-type photovoltaic modules is estimated to be -$95/kW at the 2012 metal price. At the current installed capacity of 30 GW/yr, the metal value in the PV modules represents valuable resources that should be recovered in the future. The recycling of end-of-life photovoltaic modules would supply > 88,000 and 207,000 tpa Si by 2040 and 2050, respectively. This represents more than 50% of the required Si for module fabrication. Experimental testwork on crystalline Si modules could recover a > 99.98%-grade Si product by HNO3/NaOH leaching to remove Al, Ag, and Ti and other metal ions from the doped Si. A further pyrometallurgical smelting at 1520 degrees C using CaO-CaF2-SiO2 slag mixture to scavenge the residual metals after acid leaching could finally produce > 99.998%-grade Si. A process based on HNO3/NaOH leaching and subsequent smelting is proposed for recycling Si from rejected or recycled photovoltaic modules. Implications: The photovoltaic industry is considering options of recycling PV modules to recover metals such as Si, Ag, Cu, Al, and others used in the manufacturing of the PV cells. This is to retain its "green" image and to comply with current legislations in several countries. An evaluation of potential resources made available from PV wastes and the technologies used for processing these materials is therefore of significant importance to the industry. Of interest are the costs of processing and the potential revenues gained from recycling, which should determine the viability of economic recycling of PV modules in the future.

World`s Most Valuable Brand Resonation With Categories of Different Customer Needs

Directory of Open Access Journals (Sweden)

Kaspars VIKSNE

2017-09-01

Full Text Available One of the key performance indicators of brand success is its value. Brand value is an outcome of brand`s performance in market, and is largely depended from brand`s ability to satisfy certain customer needs. For the greatest success in the world`s market brand should resonate its ability to satisfy some of customer`s most universal needs. In this paper authors strives to find out which of the needs world`s most successful brands are resonating with. Therefore paper goal is to is to determine what customer needs world`s most valuable brands are primarily satisfying. First part of paper authors briefly evaluate Maslow theory of needs. In second part of paper authors identify main challenges of brand valuation, and briefly describe today`s most valuable brands. In third part of paper authors analyzes if resonating certain human need in brand makes it to be more valuable. In last part of paper authors summarizes the main findings and gives recommendations for better marketing practices to other brands whose owners have high market ambitions. In order to attain the paper`s goal, authors will use following research methods: Comparative analysis for comparing brands in different brand rankings; Content analysis for determining what need satisfaction brand advertisements resonate; Data analysis for quantify the results gathered from content analysis

The jet impingement cell: A valuable device for investigating CO{sub 2} corrosion

Energy Technology Data Exchange (ETDEWEB)

Kinsella, Brian; John, Douglas; Bailey, Stuart; De Marco, Roland [Western Australian Corrosion Research Group, School of Applied Chemistry, Curtin University of Technology, GPO Box U1987, Perth WA, 6845 (Australia)

2004-07-01

The jet impingement cell (JIC) is a valuable technique for the investigation of carbon dioxide corrosion of steel and its inhibition under high flow conditions or high wall shear stress. Despite the use of the JIC in corrosion testing laboratories not a great deal has been published on the design and calibration of these cells. In the evaluation of corrosion inhibitors, the type of corrosion and relative performance of the inhibitors depends on the metallurgy of the steel used to manufacture electrodes and measure the corrosion rate. This paper covers aspects of cell design and the determination of mass transfer and wall shear stress at electrodes used in the cell. The performance of different generic type corrosion inhibitors and their affect on the type of corrosion (i.e, uniform, pitting and crevice corrosion) is shown and discussed. (authors)

An alternative approach to recovering valuable metals from zinc phosphating sludge.

Science.gov (United States)

Kuo, Yi-Ming

2012-01-30

This study used a vitrification process (with good potential for commercialization) to recover valuable metals from Zn phosphating sludge. The involved vitrification process achieves two major goals: it transformed hazardous Zn phosphating sludge into inert slag and it concentrated Fe (83.5%) and Zn (92.8%) into ingot and fine particulate-phase material, respectively. The Fe content in the ingot was 278,000 mg/kg, making the ingot a potential raw material for iron making. The fine particulate-phase material (collected from flue gas) contained abundant Zn (544,000 mg/kg) in the form of ZnO. The content (67.7%) of ZnO was high, so it can be directly sold to refineries. The recovered coarse particulate-phase material, with insufficient amount of ZnO, can be recycled as a feeding material for Zn re-concentration. Therefore, the vitrification process can not only treat hazardous materials but also effectively recover valuable metals. Copyright © 2011 Elsevier B.V. All rights reserved.

Metagenomes provide valuable comparative information on soil microeukaryotes

DEFF Research Database (Denmark)

Jacquiod, Samuel Jehan Auguste; Stenbæk, Jonas; Santos, Susana

2016-01-01

has been identified. Our analyses suggest that publicly available metagenome data can provide valuable information on soil microeukaryotes for comparative purposes when handled appropriately, complementing the current view provided by ribosomal amplicon sequencing methods......., providing microbiologists with substantial amounts of accessible information. We took advantage of public metagenomes in order to investigate microeukaryote communities in a well characterized grassland soil. The data gathered allowed the evaluation of several factors impacting the community structure......, including the DNA extraction method, the database choice and also the annotation procedure. While most studies on soil microeukaryotes are based on sequencing of PCR-amplified taxonomic markers (18S rRNA genes, ITS regions), this work represents, to our knowledge, the first report based solely...

Mango (Mangifera indica L.) by-products and their valuable components: a review.

Science.gov (United States)

Jahurul, M H A; Zaidul, I S M; Ghafoor, Kashif; Al-Juhaimi, Fahad Y; Nyam, Kar-Lin; Norulaini, N A N; Sahena, F; Mohd Omar, A K

2015-09-15

The large amount of waste produced by the food industries causes serious environmental problems and also results in economic losses if not utilized effectively. Different research reports have revealed that food industry by-products can be good sources of potentially valuable bioactive compounds. As such, the mango juice industry uses only the edible portions of the mangoes, and a considerable amount of peels and seeds are discarded as industrial waste. These mango by-products come from the tropical or subtropical fruit processing industries. Mango by-products, especially seeds and peels, are considered to be cheap sources of valuable food and nutraceutical ingredients. The main uses of natural food ingredients derived from mango by-products are presented and discussed, and the mainstream sectors of application for these by-products, such as in the food, pharmaceutical, nutraceutical and cosmetic industries, are highlighted. Copyright © 2015 Elsevier Ltd. All rights reserved.

Valuable metals - recovery processes, current trends, and recycling strategies

Energy Technology Data Exchange (ETDEWEB)

Froehlich, Peter; Lorenz, Tom; Martin, Gunther; Brett, Beate; Bertau, Martin [Institut fuer Technische Chemie, TU Bergakademie Freiberg, Leipziger Strasse 29, 09599, Freiberg (Germany)

2017-03-01

This Review provides an overview of valuable metals, the supply of which has been classified as critical for Europe. Starting with a description of the current state of the art, novel approaches for their recovery from primary resources are presented as well as recycling processes. The focus lies on developments since 2005. Chemistry strategies which are used in metal recovery are summarized on the basis of the individual types of deposit and mineral. In addition, the economic importance as well as utilization of the metals is outlined. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

Extraction of toxic and valuable metals from foundry sands

International Nuclear Information System (INIS)

Vite T, J.

1996-01-01

There were extracted valuable metals from foundry sands such as: gold, platinum, silver, cobalt, germanium, nickel and zinc among others, as well as highly toxic metals such as chromium, lead, vanadium and arsenic. The extraction efficiency was up to 100% in some cases. For this reason there were obtained two patents at the United States, patent number 5,356,601, in October 1994, given for the developed process and patent number 5,376,000, in December 1994, obtained for the equipment employed. Therefore, the preliminary parameters for the installation of a pilot plant have also been developed. (Author)

VALUABLE AND ORIENTATION FOUNDATIONS OF EDUCATIONAL SYSTEM OF THE COUNTRY

OpenAIRE

Vladimir I. Zagvyazinsky

2016-01-01

The aim of the investigation is to show that in modern market conditions it is necessary to keep humanistic valuable and orientation installations of domestic education and not to allow its slipping on a line item of utilitarian, quickly achievable, but not long-term benefits. Theoretical significance. The author emphasizes value of forming of an ideal – harmonious development of the personality – and the collectivist beginnings for disclosure of potential of each school student, a student, a...

CORRELATION LINKS BETWEEN SOME ECONOMICALLY VALUABLE SIGNS IN BROCCOLI

Directory of Open Access Journals (Sweden)

E. A. Zablotskaya

2018-01-01

Full Text Available The study of the correlation relationship between the signs, the informativeness of the indicators makes it possible to conduct a preliminary assessment of the plants and more objectively to identify forms with high economically valuable characteristics. Their integrated assessment will identify the best source material for further selection. In literary sources, information on the correlation in broccoli between yields and its elements are not the same. The purpose of our study was to analyze the contingency of various traits and to identify significant correlation links between quantitative traits in broccoli hybrids (42 samples. They were obtained using doubled haploid lines (DH-line of early maturity at 2 planting dates (spring and summer. Studies were conducted in the Odintsovo district of the Moscow region in field experience in 2015, 2016. Significant influence on growth and development was provided by the developing weather conditions during the growing period. The fluctuation of humidification and temperature conditions differed significantly during the years of study and the time of planting, which is an important circumstance for analyzing the data obtained. Based on the results of the research, it was concluded that the value of the correlation coefficient and the strength of the correlation relationship between the characteristics (mass, diameter, head height, plant height, vegetation period are different and depend on the set of test specimens and growing conditions. A significant stable manifestation of positive correlation was revealed during all the years of research and the time of planting between the diameter and mass of the head (r = 0.45-0.96. The variability of the correlation of other economically valuable traits is marked. 

[Psychopathology and film: a valuable interaction?].

Science.gov (United States)

van Duppen, Z; Summa, M; Fuchs, T

2015-01-01

Film or film fragments are often used in psychopathology education. However, so far there have been very few articles that have discussed the benefits and limitations of using films to explain or illustrate psychopathology. Although numerous films involves psychopathology in varying degrees, it is not clear how we can use films for psychopathology education. To examine the advantages, limitations and possible methods of using film as a means of increasing our knowledge and understanding of psychiatric illnesses. We discuss five examples that illustrate the interaction of film and psychopathology. On the one hand we explain how the psychopathological concepts are used in each film and on the other hand we explain which aspects of each film are valuable aids for teaching psychopathology. The use of film makes it possible to introduce the following topics in psychopathological teaching programme: holistic psychiatric reasoning, phenomenology and the subjective experience, the recognition of psychopathological prototypes and the importance of context. There is undoubtedly an analogy between the method we have chosen for teaching psychopathology with the help of films and the holistic approach of the psychiatrist and his or her team. We believe psychopathology education can benefit from films and we would recommend our colleagues to use it in this way.

A field guide to valuable underwater aquatic plants of the Great Lakes

Science.gov (United States)

Schloesser, Donald W.

1986-01-01

Underwater plants are a valuable part of the Great Lakes ecosystem, providing food and shelter for aquatic animals. Aquatic plants also help stabilize sediments, thereby reducing shoreline erosion. Annual fall die-offs of underwater plants provide food and shelter for overwintering small aquatic animals such as insects, snails, and freshwater shrimp.

Effect of Acid Dissolution Conditions on Recovery of Valuable Metals from Used Plasma Display Panel Scrap

Directory of Open Access Journals (Sweden)

Kim Chan-Mi

2017-06-01

Full Text Available The objective of this particular study was to recover valuable metals from waste plasma display panels using high energy ball milling with subsequent acid dissolution. Dissolution of milled (PDP powder was studied in HCl, HNO3, and H2SO4 acidic solutions. The effects of dissolution acid, temperature, time, and PDP scrap powder to acid ratio on the leaching process were investigated and the most favorable conditions were found: (1 valuable metals (In, Ag, Mg were recovered from PDP powder in a mixture of concentrated hydrochloric acid (HCl:H2O = 50:50; (2 the optimal dissolution temperature and time for the valuable metals were found to be 60°C and 30 min, respectively; (3 the ideal PDP scrap powder to acid solution ratio was found to be 1:10. The proposed method was applied to the recovery of magnesium, silver, and indium with satisfactory results.

Using Psychodynamic Interaction as a Valuable Source of Information in Social Research

DEFF Research Database (Denmark)

Schmidt, Camilla

2012-01-01

This article will address the issue of using understandings of psychodynamic interrelations as a means to grasp how social and cultural dynamics are processed individually and collectively in narratives. I apply the two theoretically distinct concepts of inter- and intrasubjectivity to gain insight...... are valuable sources of information in understanding the process of becoming a social educator....

Industrial scale chromatographic separation of valuable compounds from biomass hydrolysates and side streams

Energy Technology Data Exchange (ETDEWEB)

Saari, P.

2011-06-15

Carbohydrates are composed of a number of various monosaccharides, glucose being the most abundant. Some of the monosaccharides are valuable compounds used in the food and pharmaceutical industries. They can be separated from biomass hydrolysates e.g. by chromatographic methods. In this thesis, chromatographic separation of valuable compounds using ion exchange resins was studied on an industrial scale. Of special interest were rare monosaccharides in biomass hydrolysates. A novel chromatographic separation process was developed for fucose, starting from pre-processed spent sulfite liquor. The core of the process consists of three chromatographic separations with different types of ion exchange resins. Chromatographic separation of galactose was tested with three biomass hydrolysates; lactose, gum arabic and hemicellulose hydrolysates. It was demonstrated that also galactose can be separated from complex carbohydrate mixtures. A recovery process for arabinose from citrus pectin liquid residual and for mannose from wood pulp hydrolysate were also developed and experimentally verified. In addition to monosaccharides, chromatographic separation of glycinebetaine from vinasse was examined with a hydrogen form weak acid cation exchange resin. The separation involves untypical peak formation depending, for example, on the pH and the cation composition. The retention mechanism was found to be hydrogen bonding between glycinebetaine and the resin. In the experimental part, all four resin types - strong acid cation, strong base anion, weak acid cation and weak base anion exchange resins - were used. In addition, adsorption equilibria data of seven monosaccharides and sucrose were measured with the resins in sodium and sulfate forms because such data have been lacking. It was found out that the isotherms of all sugars were linear under industrial conditions. A systematic method for conceptual process design and sequencing of chromatographic separation steps were developed

The Valuable Role of Measuring Serum Lipid Profile in Cancer Progression

Directory of Open Access Journals (Sweden)

Farahnaz Ghahremanfard

2015-09-01

Full Text Available Objective: Serum lipid levels are not only associated with etiology, but also with prognosis in cancer. To investigate this issue further, we aimed to evaluate the serum levels of lipids in association with the most important prognostic indicators in cancer patients at the start of chemotherapy. Methods: In a retrospective cross-sectional study, using existing medical records obtained from 2009–2014, the data of all incident cancer cases in Iranian patients referred to the Semnan oncology clinic for chemotherapy were analyzed. Data on demographics, cancer type, prognostic indicators (e.g. lymph node involvement, metastasis, and stage of disease, as well as the patient’s lipid profile were collected. We used multiple logistic regression models to show the relationship between prognosis indicators and lipid profile adjusting for age, gender, and type of cancer. Results: The data of 205 patients was gathered. We found a significant difference in the lipid profile between different types of cancers (breast, colon, gastric, and ovarian. With the exception of high-density lipoprotein levels in women, which were higher than in men, the means of other lipid profiles were similar between the genders. There was a significant association between higher levels of low-density lipoprotein (LDL >110mg/dL in the serum and metastasis (adjusted odds ratio=2.4, 95% CI 1.2–3.5. No significant association was reported between lipid profile and lymph nodes involvement and stage of the disease. Conclusion: Our study suggested a benefit of measuring serum levels of lipids for predicting cancer progression. Increased LDL levels can be considered a predictive factor for increasing the risk of metastasis.

The Consortium for the Valuation of Applications Benefits Linked with Earth Science (VALUABLES)

Science.gov (United States)

Kuwayama, Y.; Mabee, B.; Wulf Tregar, S.

2017-12-01

National and international organizations are placing greater emphasis on the societal and economic benefits that can be derived from applications of Earth observations, yet improvements are needed to connect to the decision processes that produce actions with direct societal benefits. There is a need to substantiate the benefits of Earth science applications in socially and economically meaningful terms in order to demonstrate return on investment and to prioritize investments across data products, modeling capabilities, and information systems. However, methods and techniques for quantifying the value proposition of Earth observations are currently not fully established. Furthermore, it has been challenging to communicate the value of these investments to audiences beyond the Earth science community. The Consortium for the Valuation of Applications Benefits Linked with Earth Science (VALUABLES), a cooperative agreement between Resources for the Future (RFF) and the National Aeronautics and Space Administration (NASA), has the goal of advancing methods for the valuation and communication of the applied benefits linked with Earth observations. The VALUABLES Consortium will focus on three pillars: (a) a research pillar that will apply existing and innovative methods to quantify the socioeconomic benefits of information from Earth observations; (b) a capacity building pillar to catalyze interdisciplinary linkages between Earth scientists and social scientists; and (c) a communications pillar that will convey the value of Earth observations to stakeholders in government, universities, the NGO community, and the interested public. In this presentation, we will describe ongoing and future activities of the VALUABLES Consortium, provide a brief overview of frameworks to quantify the socioeconomic value of Earth observations, and describe how Earth scientists and social scientist can get involved in the Consortium's activities.

PICKLED PUMPKIN IS VALUABLE FOOD PRODUCT

Directory of Open Access Journals (Sweden)

T. A. Sannikova

2017-01-01

Full Text Available One of the main directions of the food industry development is the production of functional food products. Changes in the human’s diet structure cause that none of population group does receive necessary amount of vitamins, macro and microelements in healthy routine diet. To solve this problem, food stuffs enhanced by different ingredients enable to improve the biological and food value. The pumpkin is a valuable source of such important substances as carotene and pectin. Addition of garlic and hot pepper ingredients to process of pumpkin pickling enables to enrich the products with carbohydrates, proteins, microelements, which have low or no content in the pumpkin fruit. Therefore, the study of the influence of the different quantities of garlic and hot pepper additions on chemical composition of finished product is very important. The influence of plant additions used on chemical composition of finished product had been well determined. It was shown that through increased doses of garlic and hot pepper ingredients as compared with control, the carotene and dry matter content then decreased by 1.16%-3.43% in pickled pumpkin, while the pectin content depended on added component. The highest pectin content, 0.71% was observed at addition of 10 g. garlic ingredient per 1 kg. of raw matter, that was 4.1 times higher than control. With increased addition of hot pepper ingredient the pectin accumulation was decreasing from 0.58% in control to 0.36% in variant 10g. per 1kg. of raw matter.

Inventory of species and cultivars potentially valuable for forest/biomass production

Energy Technology Data Exchange (ETDEWEB)

Lavoie, G

1981-01-01

To prepare a guide for experiments in mini-rotation or short rotation forest production, potentially valuable species and cultivars have been inventoried. In this text, 288 species are listed under 31 genera, 27 deciduous and 4 coniferous. This partial inventory was made for the Northern Hemisphere and different climates, ranging from the tropical zone to the cold temperate zone. To be included a species had to satisfy the following conditions: ease of established and rapid juvenile growth. The list of species and cultivars is given in alphabetical order. 55 references.

Regeneration of five commercially-valuable tree species after experimental logging in an Amazonian forest

Directory of Open Access Journals (Sweden)

Lima Albertina Pimentel

2002-01-01

Full Text Available This study investigated the regeneration variation of five commercially valuable tree species in relation to different intensities of felling in fourteen 4-ha plots in an area under experimental forest management. This experiment was carried out in a typical Amazonian tropical forest sample on "terra-firme," in Manaus (AM. Plots were logged 7 and 8 years (1987 and 1988, or 3 years (1993 before the study. All trees with height greater than 2 m, and diameter at breast height (DBH smaller than 10 cm were measured. Only Aniba hostmanniana, Ocotea aciphylla, Licaria pachycarpa, Eschweilera coriacea and Goupia glabra were sufficiently common for individual analyses. These species have high timber values in the local market. Eight years after logging, the species responded differently to logging intensities. The numbers of individuals of Goupia glabra and Aniba hostmanniana were positively related to the intensity of logging, while Ocotea aciphylla, Licaria pachycarpa, and Eschweilera coriacea showed no statistically significant response. In the most recently (1993 logged areas, Goupia glabra and Aniba hostmanniana had higher numbers of individuals than the control plots.

Valuable books from the library of Paul Gore (Identification and/or inventory of sources

Directory of Open Access Journals (Sweden)

Maria Danilov

2013-12-01

Full Text Available Paul Gore (1875-1927 - an outstanding figure of the socio-political, scientific and cultural life of Bessarabia at the beginning of 20th century, was also known among his contemporaries as a keen collector of old and rare books. Undoubtedly, the most valuable part of the library of Paul Gore consisted of books on the history of Bessarabia. Documents from the National Archives of the Republic of Moldova in Chişinău confirm that he inherited a large part of books from his father Gheorghe Gore (1839-1909. A study of the Paul Gore Fund at the National Archives of Romania in Bucharest gave us a lot of documentary evidence of the destiny of this Bessarabian noble library, which later became a property of the King Ferdinand Fund. However, the fate of its most valuable part - books on the history of Bessarabia, consisted of 651 units of the total number of 6456 volumes - is still unknown.

Sea Buckthorn Oil—A Valuable Source for Cosmeceuticals

Directory of Open Access Journals (Sweden)

Marijana Koskovac

2017-10-01

Full Text Available Sea buckthorn (Hippophae rhamnoides L., Elaeagnaceae. is a thorny shrub that has small, yellow to dark orange, soft, juicy berries. Due to hydrophilic and lipophilic ingredients, berries have been used as food and medicine. Sea buckthorn (SB oil derived from berries is a source of valuable ingredients for cosmeceuticals. The unique combination of SB oil ingredients, in qualitative and quantitative aspects, provides multiple benefits of SB oil for internal and external use. Externally, SB oil can be applied in both healthy and damaged skin (burns or skin damage of different etiology, as it has good wound healing properties. Due to the well-balanced content of fatty acids, carotenoids, and vitamins, SB oil may be incorporated in cosmeceuticals for dry, flaky, burned, irritated, or rapidly ageing skin. There have been more than 100 ingredients identified in SB oil, some of which are rare in the plant kingdom (e.g., the ratio of palmitoleic to γ-linolenic acid. This review discusses facts related to the origin and properties of SB oil that make it suitable for cosmeceutical formulation.

JCL roundtable: Future of the lipid laboratory: Choosing valuable measures among the lipoproteins (part 1).

Science.gov (United States)

Brown, William Virgil; Handelsman, Yehuda; Martin, Seth S; Morris, Pamela B

The measurement of cholesterol and triglycerides as indicators of metabolic disorders and most particularly of vascular disease risk has been of growing importance to physicians and epidemiologists over the past century. This was refocused on the lipoproteins, the specific packages in blood that carry these lipids, by John Gofman, MD, PhD, and Don Fredrickson, MD, more than 50 years ago. We continue to learn about the metabolism of these large molecular structures and their relationship to arteriosclerosis as new genetic and interventional studies are published. The clinical laboratory has evolved to provide more focused information with measures that can help us assess risk and target our therapy more effectively. In this roundtable discussion, I had the opportunity to talk with physicians who consider lipoprotein management to be central features of their practice every day. They personally care for patients with metabolic disorders in which the lipoproteins have caused disease or are predicted to do so. They are well-versed on the way that science is leading us in our field. I believe that you will learn from their view of current needs regarding lipoprotein measures and the changes that may derive from ongoing scientific studies in our field. Copyright © 2017 National Lipid Association. Published by Elsevier Inc. All rights reserved.

THE ECONOMIC SIGNIFICANCE OF CLOTH AND APPAREL: AN ANALYSIS OF GEORGE WASHINGTON’S SHIPPING RECEIPTS, 1754-1772

Directory of Open Access Journals (Sweden)

Wendy Lucas

2016-08-01

Full Text Available In eighteenth-century Virginia, textiles had great social and economic significance: a valuable resource and an excellent social signal (Spence, 1973. Textiles were costly to produce and purchase. We present a quantitative case study of George Washington’s commercial correspondence with his factors between 1754 and 1772. Textiles account for 32.9 percent of orders and 46.1 percent of total expenditure. Washington bought large volumes of these items and paid relatively high prices for them. Washington spent £1943 6s. 0d. on textiles over these years. On a per year basis, this spending was nearly nine times colonial annual average income over this period.

Maintaining and troubleshooting your 3D printer

CERN Document Server

Bell, Charles

2014-01-01

Maintaining and Troubleshooting Your 3D Printer by Charles Bell is your guide to keeping your 3D printer running through preventive maintenance, repair, and diagnosing and solving problems in 3D printing. If you've bought or built a 3D printer such as a MakerBot only to be confounded by jagged edges, corner lift, top layers that aren't solid, or any of a myriad of other problems that plague 3D printer enthusiasts, then here is the book to help you get past all that and recapture the joy of creative fabrication. The book also includes valuable tips for builders and those who want to modify the

Rice husk ash – A valuable reinforcement for high density polyethylene

International Nuclear Information System (INIS)

Ayswarya, E.P.; Vidya Francis, K.F.; Renju, V.S.; Thachil, Eby Thomas

2012-01-01

Highlights: ► RHA is formed from the incineration of rice husk. ► RHA is mainly a mixture of silica with various metallic compounds. ► RHA is a valuable reinforcing material for HDPE. ► RHA can be incorporated into HDPE by the melt blending process. ► The best mechanical properties are observed at 1.5% RHA and 15% compatibilizer. -- Abstract: This paper presents the results of a study on the use of rice husk ash (RHA) for property modification of high density polyethylene (HDPE). Rice husk is a waste product of the rice processing industry. It is used widely as a fuel which results in large quantities of RHA. Here, the characterization of RHA has been done with the help of X-ray diffraction (XRD), Inductively Coupled Plasma Atomic Emission Spectroscopy (ICPAES), light scattering based particle size analysis, Fourier transform infrared spectroscopy (FTIR) and Scanning Electron Microscope (SEM). Most reports suggest that RHA when blended directly with polymers without polar groups does not improve the properties of the polymer substantially. In this study RHA is blended with HDPE in the presence of a compatibilizer. The compatibilized HDPE-RHA blend has a tensile strength about 18% higher than that of virgin HDPE. The elongation-at-break is also higher for the compatibilized blend. TGA studies reveal that uncompatibilized as well as compatibilized HDPE-RHA composites have excellent thermal stability. The results prove that RHA is a valuable reinforcing material for HDPE and the environmental pollution arising from RHA can be eliminated in a profitable way by this technique.

Lacplesa Alus, Gutta bought by Nordic investors

Index Scriptorium Estoniae

2004-01-01

The danish Brewery Group ostis enamuse Läti õlletehase Lacplesa Alus aktsiatest, Lätis registreeritud Islandi kapitaliga firma Nordic Partners ostis mahlatootja Gutta. Lisa: Läti kaubamärgid, mis müüdud 2004. a.

Concept of an integrated waste economy represented on the example of recycling of valuable materials

Energy Technology Data Exchange (ETDEWEB)

Wender, H

1980-08-01

The historical development of waste elimination is discussed, followed by the waste problem in an environmental discussion, the possibilities of recycling within the framework of a waste industry, and the solution of the waste problem from a waste-economy viewpoint, including the definition of 'waste' and the grouping by types of waste, their amounts and increase rates, composition and valuable materials in community wastes with a review of waste technologies under waste-economy viewpoints. This is followed by a discussion of the sales possibilities for valuable components from mechanical sorting facilities, including used paper, old glass, hard substances, metals, plastics, succeeded by a comparative evaluation method, and the national economy aspect of the waste industry, with the savings effect in raw materials for different branches, effects on raw material reserves, the problem of dependence on imports, waste rates and living standard, and the importance of environmental instruments which are discussed in detail.

Digital Technology in the Visual Arts Classroom: An [un]Easy Partnership

Science.gov (United States)

Wilks, Judith; Cutcher, Alexandra; Wilks, Susan

2012-01-01

This article scrutinizes the dichotomy of the uneasy and easy partnerships that exist between digital technology and visual arts education. The claim that by putting computers into schools "we have bought 'one half of a product'... we've bought the infrastructure and the equipment but we haven't bought the educational…

The Marine Microalga, Heterosigma akashiwo, Converts Industrial Waste Gases into Valuable Biomass

Energy Technology Data Exchange (ETDEWEB)

Stewart, Jennifer J., E-mail: jen@udel.edu [College of Earth, Ocean, and Environment, University of Delaware, Lewes, DE (United States); Bianco, Colleen M. [Department of Microbiology, University of Illinois at Urbana-Champaign, Urbana, IL (United States); Miller, Katherine R. [Department of Chemistry, Salisbury University, Salisbury, MD (United States); Coyne, Kathryn J. [College of Earth, Ocean, and Environment, University of Delaware, Lewes, DE (United States)

2015-03-16

Heterosigma akashiwo is an excellent candidate for growth on industrial emissions since this alga has the ability to metabolize gaseous nitric oxide (NO) into cellular nitrogen via a novel chimeric protein (NR2-2/2HbN) and also tolerates wide fluctuations in temperature, salinity, and nutrient conditions. Here, we evaluated biomass productivity and composition, photosynthetic efficiency, and expression of NR2-2/2HbN for Heterosigma growing on simulated flue gas containing 12% CO{sub 2} and 150 ppm NO. Biomass productivity of Heterosigma more than doubled in flue gas conditions compared to controls, reflecting a 13-fold increase in carbohydrate and a 2-fold increase in protein productivity. Lipid productivity was not affected by flue gas and the valuable omega-3 fatty acids, eicosapentaenoic acid and docosahexaenoic acid, constituted up to 16% of total fatty acid methyl esters. Photochemical measurements indicated that photosynthesis in Heterosigma is not inhibited by high CO{sub 2} and NO concentrations, and increases in individual fatty acids in response to flue gas were driven by photosynthetic requirements. Growth rates and maximum cell densities of Heterosigma grown on simulated flue gas without supplemental nitrogen, along with a significant increase in NR2-2/2HbN transcript abundance in response to flue gas, demonstrated that nitrogen derived from NO gas is biologically available to support enhanced CO{sub 2} fixation. Together, these results illustrate the robustness of this alga for commercial-scale biomass production and bioremediation of industrial emissions.

The Marine Microalga, Heterosigma akashiwo, Converts Industrial Waste Gases into Valuable Biomass

International Nuclear Information System (INIS)

Stewart, Jennifer J.; Bianco, Colleen M.; Miller, Katherine R.; Coyne, Kathryn J.

2015-01-01

Heterosigma akashiwo is an excellent candidate for growth on industrial emissions since this alga has the ability to metabolize gaseous nitric oxide (NO) into cellular nitrogen via a novel chimeric protein (NR2-2/2HbN) and also tolerates wide fluctuations in temperature, salinity, and nutrient conditions. Here, we evaluated biomass productivity and composition, photosynthetic efficiency, and expression of NR2-2/2HbN for Heterosigma growing on simulated flue gas containing 12% CO 2 and 150 ppm NO. Biomass productivity of Heterosigma more than doubled in flue gas conditions compared to controls, reflecting a 13-fold increase in carbohydrate and a 2-fold increase in protein productivity. Lipid productivity was not affected by flue gas and the valuable omega-3 fatty acids, eicosapentaenoic acid and docosahexaenoic acid, constituted up to 16% of total fatty acid methyl esters. Photochemical measurements indicated that photosynthesis in Heterosigma is not inhibited by high CO 2 and NO concentrations, and increases in individual fatty acids in response to flue gas were driven by photosynthetic requirements. Growth rates and maximum cell densities of Heterosigma grown on simulated flue gas without supplemental nitrogen, along with a significant increase in NR2-2/2HbN transcript abundance in response to flue gas, demonstrated that nitrogen derived from NO gas is biologically available to support enhanced CO 2 fixation. Together, these results illustrate the robustness of this alga for commercial-scale biomass production and bioremediation of industrial emissions.

HISTORY AND WAYS OF FOUNDATION OF THE FUNDS OF VALUABLE AND RARE LITERATURE OF NATIONAL UNIVERSITY OF WATER AND ENVIROMENTAL ENGINEERING

Directory of Open Access Journals (Sweden)

А. В. Крива

2017-10-01

Full Text Available Fund of valuable and rare literature of the Scientific Library of National University of Water and Environmental Engineering enrols more than four thousand copies. The basis for its acquisition is the principle of general cultural, scientific and aesthetic significance. This fund is completed with all categories and types of national and foreign publications. It is also fulfilled with documents that have gained the status of unique sources and is related to the history of the university, and with directions of the corresponding profile of training of specialists in educational and research institution. According to the chronological principle, the fund of valuable and rare literature includes documents issued before 1945 and earlier. There are bookshops which reflect the history of the development of national and foreign science and technology and are reasonably valuable both for scientists and students. Here can be distinguished: unique book editions; separate courses in technical disciplines; multi-volume collections of scientific works; rare 19th-century textbooks; works of domestic and world classics of science and technology, as well as dictionaries and reference publications. The fund is arranged in a systematic alphabetical system. For the individual account of valuable and rare literature, “Card of rare and valuable documents” is conducted. The composition of the fund, as it receives, is displayed in the electronic catalog of the library. Recently, you can also read publications in the public repository of the educational institution.

Measuring School Contexts

Directory of Open Access Journals (Sweden)

Chandra L. Muller PhD

2015-11-01

Full Text Available This article describes issues in measuring school contexts with an eye toward understanding students’ experiences and outcomes. I begin with an overview of the conceptual underpinnings related to measuring contexts, briefly describe the initiatives at the National Center for Education Statistics to measure school contexts, and identify possible gaps in those initiatives that if filled could provide valuable new data for researchers. Next, I discuss new approaches and opportunities for measurement, and special considerations related to diverse populations and youth development. I conclude with recommendations for future priorities.

Current technologies and new insights for the recovery of high valuable compounds from fruits by-products.

Science.gov (United States)

Ferrentino, Giovanna; Asaduzzaman, Md; Scampicchio, Matteo Mario

2018-02-11

The recovery of high valuable compounds from food waste is becoming a tighten issue in food processing. The large amount of non-edible residues produced by food industries causes pollution, difficulties in the management, and economic loss. The waste produced during the transformation of fruits includes a huge amount of materials such as peels, seeds, and bagasse, whose disposal usually represents a problem. Research over the past 20 years revealed that many food wastes could serve as a source of potentially valuable bioactive compounds, such as antioxidants and vitamins with increasing scientific interest thanks to their beneficial effects on human health. The challenge for the recovery of these compounds is to find the most appropriate and environment friendly extraction technique able to achieve the maximum extraction yield without compromising the stability of the extracted products. Based on this scenario, the aim of the current review is twofold. The first is to give a brief overview of the most important bioactive compounds occurring in fruit wastes. The second is to describe the pro and cons of the most up-to-dated innovative and environment friendly extraction technologies that can be an alternative to the classical solvent extraction procedures for the recovery of valuable compounds from fruit processing. Furthermore, a final section will take into account published findings on the combination of some of these technologies to increase the extracts yields of bioactives.

Motivational interviewing: a valuable tool for the psychiatric advanced practice nurse.

Science.gov (United States)

Karzenowski, Abby; Puskar, Kathy

2011-01-01

Motivational Interviewing (MI) is well known and respected by many health care professionals. Developed by Miller and Rollnick (2002) , it is a way to promote behavior change from within and resolve ambivalence. MI is individualized and is most commonly used in the psychiatric setting; it is a valuable tool for the Psychiatric Advanced Nurse Practice Nurse. There are many resources that talk about what MI is and the principles used to apply it. However, there is little information about how to incorporate MI into a clinical case. This article provides a summary of articles related to MI and discusses two case studies using MI and why advanced practice nurses should use MI with their patients.

Hemodynamic exercise testing. A valuable tool in the selection of cardiac transplantation candidates.

Science.gov (United States)

Chomsky, D B; Lang, C C; Rayos, G H; Shyr, Y; Yeoh, T K; Pierson, R N; Davis, S F; Wilson, J R

1996-12-15

Peak exercise oxygen consumption (Vo2), a noninvasive index of peak exercise cardiac output (CO), is widely used to select candidates for heart transplantation. However, peak exercise Vo2 can be influenced by noncardiac factors such as deconditioning, motivation, or body composition and may yield misleading prognostic information. Direct measurement of the CO response to exercise may avoid this problem and more accurately predict prognosis. Hemodynamic and ventilatory responses to maximal treadmill exercise were measured in 185 ambulatory patients with chronic heart failure who had been referred for cardiac transplantation (mean left ventricular ejection fraction, 22 +/- 7%; mean peak Vo2, 12.9 +/- 3.0 mL. min-1.kg-1). CO response to exercise was normal in 83 patients and reduced in 102. By univariate analysis, patients with normal CO responses had a better 1-year survival rate (95%) than did those with reduced CO responses (72%) (P 14 mL.min-1.kg-1 (88%) was not different from that of patients with peak Vo2 of 10 mL.min-1.kg-1 (89%) (P < .0001). By Cox regression analysis, exercise CO response was the strongest independent predictor of survival (risk ratio, 4.3), with peak Vo2 dichotomized at 10 mL. min-1.kg-1 (risk ratio, 3.3) as the only other independent predictor. Patients with reduced CO responses and peak Vo2 of < or = 10 mL.min-1.kg-1 had an extremely poor 1-year survival rate (38%). Both CO response to exercise and peak exercise Vo2 provide valuable independent prognostic information in ambulatory patients with heart failure. These variables should be used in combination to select potential heart transplantation candidates.

Combined measurement of plasma cystatin C and low-density lipoprotein cholesterol: A valuable tool for evaluating progressive supranuclear palsy.

Science.gov (United States)

Weng, Ruihui; Wei, Xiaobo; Yu, Bin; Zhu, Shuzhen; Yang, Xiaohua; Xie, Fen; Zhang, Mahui; Jiang, Ying; Feng, Zhong-Ping; Sun, Hong-Shuo; Xia, Ying; Jin, Kunlin; Chan, Piu; Wang, Qing; Gao, Xiaoya

2018-07-01

Progressive supranuclear palsy (PSP) was previously thought as a cause of atypical Parkinsonism. Although Cystatin C (Cys C) and low-density cholesterol lipoprotein-C (LDL-C) are known to play critical roles in Parkinsonism, it is unknown whether they can be used as markers to distinguish PSP patients from healthy subjects and to determine disease severity. We conducted a cross-sectional study to determine plasma Cys C/HDL/LDL-C levels of 40 patients with PSP and 40 healthy age-matched controls. An extended battery of motor and neuropsychological tests, including the PSP-Rating Scale (PSPRS), the Non-Motor Symptoms Scale (NMSS), Geriatric Depression Scale (GDS) and Mini-Mental State Examination (MMSE), was used to evaluate the disease severity. Receiver operating characteristic (ROC) curves were adopted to assess the prognostic accuracy of Cys C/LDL-C levels in distinguishing PSP from healthy subjects. Patients with PSP exhibited significantly higher plasma levels of Cys C and lower LDL-C. The levels of plasma Cys C were positively and inversely correlated with the PSPRS/NMSS and MMSE scores, respectively. The LDL-C/HDL-C ratio was positively associated with PSPRS/NMSS and GDS scores. The ROC curve for the combination of Cys C and LDL-C yielded a better accuracy for distinguishing PSP from healthy subjects than the separate curves for each parameter. Plasma Cys C and LDL-C may be valuable screening tools for differentiating PSP from healthy subjects; while they could be useful for the PSP intensifies and severity evaluation. A better understanding of Cys C and LDL-C may yield insights into the pathogenesis of PSP. Copyright © 2018 Elsevier Ltd. All rights reserved.

A simple and valuable approach for measuring customer satisfaction.

Science.gov (United States)

Kinney, William C

2005-08-01

To determine the financial impact of poor customer satisfaction and the value of information gained from using a 1-question customer-satisfaction survey in a medical setting. A single-question customer-satisfaction survey was collected from customers presenting to an academic otolaryngology head and neck surgery outpatient clinic. The overall response rate was 25%, overall net promoter score was 67.3%, lowest net promoter score occurred on Wednesday and Friday, overall net potential referrals were 872, and potential lost revenue from dissatisfied customers equaled US 2.3 million dollars. A single-question customer-satisfaction survey may help identify areas of customer dissatisfaction that lead to a significant source of lost revenue. The competitive forces in today's health care environment require medical practices to address issues related to customer satisfaction.

Physico-Chemical Evaluation of Honey Fortified with Oleaginous Seeds

Directory of Open Access Journals (Sweden)

Ariana Bianca Velciov

2014-11-01

Full Text Available This research followed to achieve some natural-fortified food, based on honey and oleaginous fruits. Honey and oleaginous fruits are extremely valuable for human diet. With their rich nutrient content, new products obtained by mixing honey with seeds may be considered both traditional food with high nutritional value as well as fortified food. The samples were constituted from acacia flowers honey bought directly from the producer, to which were added various quantities of oleaginous fruits (seeds. Thus, we obtained 3 different types of fortified honey, using pumpkin seeds, sunflower seeds and hemp seeds. Samples obtained were stored in appropriate conditions. From these samples, were made analytical tests: ascorbic acid and humidity.

Recovery of valuable nitrogen compounds from agricultural liquid wastes: potential possibilities, bottlenecks and future technological challenges.

NARCIS (Netherlands)

Rulkens, W.H.; Klapwijk, A.; Willers, H.C.

1998-01-01

Agricultural liquid livestock wastes are an important potential source of valuable nitrogen-containing compounds such as ammonia and proteins. Large volumetric quantities of these wastes are produced in areas with a high livestock production density. Much technological research has been carried out

Hypnosis as a Valuable Tool for Surgical Procedures in the Oral and Maxillofacial Area.

Science.gov (United States)

Montenegro, Gil; Alves, Luiza; Zaninotto, Ana Luiza; Falcão, Denise Pinheiro; de Amorim, Rivadávio Fernandes Batista

2017-04-01

Hypnosis is a valuable tool in the management of patients who undergo surgical procedures in the maxillofacial complex, particularly in reducing and eliminating pain during surgery and aiding patients who have dental fear and are allergic to anesthesia. This case report demonstrates the efficacy of hypnosis in mitigating anxiety, bleeding, and pain during dental surgery without anesthesia during implant placement of tooth 14, the upper left first molar.

Deep cleaning of a metallurgical zinc leaching residue and recovery of valuable metals

Science.gov (United States)

Xing, Peng; Ma, Bao-zhong; Zeng, Peng; Wang, Cheng-yan; Wang, Ling; Zhang, Yong-lu; Chen, Yong-qiang; Wang, Shuo; Wang, Qiu-yin

2017-11-01

Huge quantities of zinc leaching residues (ZLRs) generated from zinc production are dumped continuously around the world and pose a potential environmental threat because of their considerable amounts of entrained heavy metals (mainly lead). Most ZLRs have not been properly treated and the valuable metals in them have not yet been effectively recovered. Herein, the deep cleaning of a ZLR and recovery of valuable metals via a hydrometallurgical route were investigated. The cleaning process consists of two essential stages: acid leaching followed by calcium chloride leaching. The optimum conditions for extracting zinc, copper, and indium by acid leaching were a sulfuric acid concentration of 200 g·L-1, a liquid/solid ratio of 4:1 (mL/g), a leaching time of 2 h, and a temperature of 90°C. For lead and silver extractions, the optimum conditions were a calcium chloride concentration of 400 g·L-1, a pH value of 1.0, a leaching time of 1 h, and a temperature of 30°C. After calcium chloride leaching, silver and lead were extracted out and the lead was finally recovered as electrolytic lead by electrowinning. The anglesite phase, which poses the greatest potential environmental hazard, was removed from the ZLR after deep cleaning, thus reducing the cost of environmental management of ZLRs. The treatment of chlorine and spent electrolyte generated in the process was discussed.

Energetical fly ashes – separation and utilization of metallic valuable components

Directory of Open Access Journals (Sweden)

Michalíková Františka

2000-12-01

Full Text Available In the contribution, methods of separating metals – Fe, Al, Ge from energetic wastes – fly ashes are presented along with further possibilities of utilization of particular valuable components for industrial purposes.In the contribution, properties of energetic wastes are presented influencing the contents, separability, and utilizability of metal-bearing valuable components. From among physical properties these are grain size distribution and surface area. Chemical properties are characterized by elements contained in combusted coal whose content after combustion is increased 2 to 4 times, depending on the content of ash and combustible matters in original coal. Mineralogical properties of energetic wastes are determined by the combustion process conditions in the course of which mineral novelties are produced in concentrations suitable for separation.In the contribution, methods of separation and utilization of metals such as Fe, Al, Ge are described. From literature information on the processing of Fe component, as well as from results of experiments made at the Department of Mineral Processing and Environmental Protection, Technical University of Kosice follows that the highest concentration and mass yield of the component can be obtained from black coal fly ashes produced in smelting boilers. The content of Al in Slovak energetic wastes is lower than the 30 % Al2O3 limit that conditions an economic technological processing. Only in the case of black coal fly ash from TEKO Kosice and EVO Vojany was the Al2O3 content of 32.93 %. Therefore, in an indirect way – by separating the residues of uncombusted coal and magnetite Fe – the content of Al in fly ash was increased.For Ge, a principle of selective sizing has been utilized.A complex utilization of energetic wastes, that is the separation of metallic components, elimination of particular metals and the subsequent treatment of nonmetallic residue, should be an effective solution in various

Permanent foresty plots: a potentially valuable teaching resource in undergraduate biology porgrams for the Caribbean

Science.gov (United States)

H. Valles; C.M.S. Carrington

2016-01-01

There has been a recent proposal to change the way that biology is taught and learned in undergraduate biology programs in the USA so that students develop a better understanding of science and the natural world. Here, we use this new, recommended teaching– learning framework to assert that permanent forestry plots could be a valuable tool to help develop biology...

Assessment of radioactivity controls performed by the IRSN on enamels pigmented by uranium and recommendations related to the use of radiation meters by the public; Bilan des controles de radioactivite effectues par l'IRSN sur des emaux pigmentes par de l'uranium et recommandations relatives a l'emploi de radiametres par des personnes du public

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-09-15

This information note reports the results of measurements performed by the IRSN on enamel pictures possessed by a Limoges inhabitant who bought a radiometer and measured an unusually high radioactivity level due to the presence of uranium-based yellow pigments. The performed measurements are described and the results are discussed in terms of radioactivity level and of radionuclide identification

Degs and degu operon from Bacillus-brevis: a combination that enhances the production of commercially valuable enzymes

CSIR Research Space (South Africa)

Louw, M

1995-05-01

Full Text Available A novel method has been developed for increasing the production of commercially valuable enzymes, such as proteases, beta-glucanases, alpha-amylases and levansucrase. It is dependent on two genes cloned from Bacillus brevis, expressed on a multicopy...

Technologies for Extracting Valuable Metals and Compounds from Geothermal Fluids

Energy Technology Data Exchange (ETDEWEB)

Harrison, Stephen [SIMBOL Materials

2014-04-30

Executive Summary Simbol Materials studied various methods of extracting valuable minerals from geothermal brines in the Imperial Valley of California, focusing on the extraction of lithium, manganese, zinc and potassium. New methods were explored for managing the potential impact of silica fouling on mineral extraction equipment, and for converting silica management by-products into commercial products.` Studies at the laboratory and bench scale focused on manganese, zinc and potassium extraction and the conversion of silica management by-products into valuable commercial products. The processes for extracting lithium and producing lithium carbonate and lithium hydroxide products were developed at the laboratory scale and scaled up to pilot-scale. Several sorbents designed to extract lithium as lithium chloride from geothermal brine were developed at the laboratory scale and subsequently scaled-up for testing in the lithium extraction pilot plant. Lithium The results of the lithium studies generated the confidence for Simbol to scale its process to commercial operation. The key steps of the process were demonstrated during its development at pilot scale: 1. Silica management. 2. Lithium extraction. 3. Purification. 4. Concentration. 5. Conversion into lithium hydroxide and lithium carbonate products. Results show that greater than 95% of the lithium can be extracted from geothermal brine as lithium chloride, and that the chemical yield in converting lithium chloride to lithium hydroxide and lithium carbonate products is greater than 90%. The product purity produced from the process is consistent with battery grade lithium carbonate and lithium hydroxide. Manganese and zinc Processes for the extraction of zinc and manganese from geothermal brine were developed. It was shown that they could be converted into zinc metal and electrolytic manganese dioxide after purification. These processes were evaluated for their economic potential, and at the present time Simbol

GC Analyses of Salvia Seeds as Valuable Essential Oil Source

Directory of Open Access Journals (Sweden)

Mouna Ben Taârit

2014-01-01

Full Text Available The essential oils of seeds of Salvia verbenaca, Salvia officinalis, and Salvia sclarea were obtained by hydrodistillation and analyzed by gas chromatography (GC and GC-mass spectrometry. The oil yields (w/w were 0.050, 0.047, and 0.045% in S. verbenaca, S. sclarea, and S. officinalis, respectively. Seventy-five compounds were identified. The essential oil composition of S. verbenaca seeds showed that over 57% of the detected compounds were oxygenated monoterpenes followed by sesquiterpenes (24.04% and labdane type diterpenes (5.61%. The main essential oil constituents were camphor (38.94%, caryophyllene oxide (7.28%, and 13-epi-manool (5.61%, while those of essential oil of S. officinalis were α-thujone (14.77%, camphor (13.08%, and 1,8-cineole (6.66%. In samples of S. sclarea, essential oil consists mainly of linalool (24.25%, α-thujene (7.48%, linalyl acetate (6.90%, germacrene-D (5.88%, bicyclogermacrene (4.29%, and α-copaene (4.08%. This variability leads to a large range of naturally occurring volatile compounds with valuable industrial and pharmaceutical outlets.

A study on the fusion reactor - Study of ICRF coupling in the KAIST tokamak plasma

Energy Technology Data Exchange (ETDEWEB)

Choi, Duk In; Chang, Hong Young; Lee, Sun Chil; Jun, Sang Jin; Kwon, Gi Chung; Seo, Sung Hun; Heo, Sung Hoi; You, Kwang Il; Song, Soo Bin; Lee, Sung Chul; Kim, Min Chul; Lee, Chan Hui [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1996-09-01

Research objectives are to design and fabricate the antenna, measure t property of absorption transmitted to the plasma, and research the physical phenomena about the ICRF coupling, Main heating method is ohmic heating at the KAIST tokamak. The power of the plasma produced by ohmic heating is about 100 kW. Because the toroidal field is 5 {approx} 8 kG, the RF system`s output power is about 10 kW and frequency range is 7 {approx} 30 MHz. In the first year, a 1 kW RF preamplifier was bought. In this year, a CW 2 kW RF main amp. and RF power monitoring system was bought. In the research on antenna, we study the method how to measure electric field emitted from antenna using piezo elements. The matching network composed of two VVC (35 kV), 100 {approx} 1000 pF match firmly up to 50 kW power. We studied the measurement method of antenna impedance theoretically, and measured power efficiency and antenna impedance in the helicon plasma. 32 refs., 5 tabs., 29 figs. (author)

Trust as a valuable strategic variable in the food industry: different types of trust and their implementation

NARCIS (Netherlands)

Lindgreen, A.

2003-01-01

Although it is often suggested that trust is an important construct in relationship marketing, there is only little empirical evidence of how, if at all, trust may be used as a valuable strategic variable. In the 1990s, the international food industry faced a number of serious challenges, most

Whey-derived valuable products obtained by microbial fermentation.

Science.gov (United States)

Pescuma, Micaela; de Valdez, Graciela Font; Mozzi, Fernanda

2015-08-01

Whey, the main by-product of the cheese industry, is considered as an important pollutant due to its high chemical and biological oxygen demand. Whey, often considered as waste, has high nutritional value and can be used to obtain value-added products, although some of them need expensive enzymatic synthesis. An economical alternative to transform whey into valuable products is through bacterial or yeast fermentations and by accumulation during algae growth. Fermentative processes can be applied either to produce individual compounds or to formulate new foods and beverages. In the first case, a considerable amount of research has been directed to obtain biofuels able to replace those derived from petrol. In addition, the possibility of replacing petrol-derived plastics by biodegradable polymers synthesized during bacterial fermentation of whey has been sought. Further, the ability of different organisms to produce metabolites commonly used in the food and pharmaceutical industries (i.e., lactic acid, lactobionic acid, polysaccharides, etc.) using whey as growth substrate has been studied. On the other hand, new low-cost functional whey-based foods and beverages leveraging the high nutritional quality of whey have been formulated, highlighting the health-promoting effects of fermented whey-derived products. This review aims to gather the multiple uses of whey as sustainable raw material for the production of individual compounds, foods, and beverages by microbial fermentation. This is the first work to give an overview on the microbial transformation of whey as raw material into a large repertoire of industrially relevant foods and products.

Lobster processing by-products as valuable bioresource of marine functional ingredients, nutraceuticals, and pharmaceuticals.

Science.gov (United States)

Nguyen, Trung T; Barber, Andrew R; Corbin, Kendall; Zhang, Wei

2017-01-01

The worldwide annual production of lobster was 165,367 tons valued over $3.32 billion in 2004, but this figure rose up to 304,000 tons in 2012. Over half the volume of the worldwide lobster production has been processed to meet the rising global demand in diversified lobster products. Lobster processing generates a large amount of by-products (heads, shells, livers, and eggs) which account for 50-70% of the starting material. Continued production of these lobster processing by-products (LPBs) without corresponding process development for efficient utilization has led to disposal issues associated with costs and pollutions. This review presents the promising opportunities to maximize the utilization of LPBs by economic recovery of their valuable components to produce high value-added products. More than 50,000 tons of LPBs are globally generated, which costs lobster processing companies upward of about $7.5 million/year for disposal. This not only presents financial and environmental burdens to the lobster processors but also wastes a valuable bioresource. LPBs are rich in a range of high-value compounds such as proteins, chitin, lipids, minerals, and pigments. Extracts recovered from LPBs have been demonstrated to possess several functionalities and bioactivities, which are useful for numerous applications in water treatment, agriculture, food, nutraceutical, pharmaceutical products, and biomedicine. Although LPBs have been studied for recovery of valuable components, utilization of these materials for the large-scale production is still very limited. Extraction of lobster components using microwave, ultrasonic, and supercritical fluid extraction were found to be promising techniques that could be used for large-scale production. LPBs are rich in high-value compounds that are currently being underutilized. These compounds can be extracted for being used as functional ingredients, nutraceuticals, and pharmaceuticals in a wide range of commercial applications

The intrapreneur: A distinct and valuable role to be institutionalized and strategically managed

DEFF Research Database (Denmark)

Ashourizadeh, Shayegheh; Schøtt, Thomas

are distinct from routine employees and somewhat similar to entrepreneurs. Thereby intrapreneurs are a human resource that by developing new activities for their employer and also by creating new jobs is very valuable. – The rate of intrapreneurship among employees is higher in Denmark than in almost all other......, especially in Denmark, to adopt strategies for institutionalization and management of this human resource....... more frequently than routine employees are self-efficacious, opportunity-perceiving, risk-willing and role-modeling starters, have meaningful and autonomous jobs, and are satisfied with their jobs and salary, but also experience more stress in work; and in these job-characteristics intrapreneurs...

Enrichment of valuable elements from vanadium slag using superconducting HGMS technology

Energy Technology Data Exchange (ETDEWEB)

He, Sai; Yang, Chang Qiao; Li, Su Qin; Zhang, Chang Quan [School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing (China)

2017-03-15

Vanadium slags is a kind of vanadiferous solid waste from steelmaking process. It not only occupies land, pollutes environment, but also leads to waste of resources. Based on the difference of magnetic susceptibility of different particles caused by their chemical and physical properties from vanadium slag, a new technology, superconducting high gradient magnetic separation was investigated for separation and extraction of valuable substances from vanadium slag. The magnetic concentrate was obtained under optimal parameters, i.e., a particle size -200 mesh, a magnetic flux density of 0.8 T, a slurry concentration of 5 g/L, an amount of steel wools of 25 g and a slurry flow velocity of 2 L/min. The content of Fe{sub 2}O{sub 3} in concentrate could be increased from 39.6% to 55.0% and V2O5 from 2.5% to 4.0%, respectively. The recovery rate is up to 42.9%, and the vanadium slag has been effectively reused.

Collaborative Filtering: Fundamental Limits and Good Practices

Indian Academy of Sciences (India)

Shopping. Services. Travel. Events. Media. Social Network. Web Search: Long list of related items ... People who bought this also bought... •Google News: ... Suggests movies using rating matrix. •Facebook .... Number of rows, columns → ∞.

Conversion of waste polystyrene through catalytic degradation into valuable products

Energy Technology Data Exchange (ETDEWEB)

Shah, Jasmin; Jan, Muhammad Rasul; Adnan [University of Peshawar, Peshawar (Pakistan)

2014-08-15

Waste expanded polystyrene (EPS) represents a source of valuable chemical products like styrene and other aromatics. The catalytic degradation was carried out in a batch reactor with a mixture of polystyrene (PS) and catalyst at 450 .deg. C for 30 min in case of Mg and at 400 .deg. C for 2 h both for MgO and MgCO{sub 3} catalysts. At optimum degradation conditions, EPS was degraded into 82.20±3.80 wt%, 91.60±0.20 wt% and 81.80±0.53 wt% liquid with Mg, MgO and MgCO{sub 3} catalysts, respectively. The liquid products obtained were separated into different fractions by fractional distillation. The liquid fractions obtained with three catalysts were compared, and characterized using GC-MS. Maximum conversion of EPS into styrene monomer (66.6 wt%) was achieved with Mg catalyst, and an increase in selectivity of compounds was also observed. The major fraction at 145 .deg. C showed the properties of styrene monomer. The results showed that among the catalysts used, Mg was found to be the most effective catalyst for selective conversion into styrene monomer as value added product.

Option's value - Greek measures fluctuations and their consequences

Directory of Open Access Journals (Sweden)

Izabela Pruchnicka-Grabias

2004-01-01

Full Text Available Options are financial instruments that can be applied in many situations. Options buyers sell risk which is bought by their sellers who are obliged to reduce it as much as possible. It can be done by using hedging strategies based on Greek letters and options values analysis. The author proves that Greek letters are not constant during the time of option’s life. The paper shows to what extent they are influenced by such factors as risk free interest rate, volatility, underlying asset price and time to maturity. The conclusion is that options sellers must play an active role, i.e. follow fluctuations of all these parameters and modify their hedging portfolios regularly.

Electronic theses and dissertations: a review of this valuable resource for nurse scholars worldwide.

Science.gov (United States)

Goodfellow, L M

2009-06-01

A worldwide repository of electronic theses and dissertations (ETDs) could provide worldwide access to the most up-to-date research generated by masters and doctoral students. Until that international repository is established, it is possible to access some of these valuable knowledge resources. ETDs provide a technologically advanced medium with endless multimedia capabilities that far exceed the print and bound copies of theses and dissertations housed traditionally in individual university libraries. CURRENT USE: A growing trend exists for universities worldwide to require graduate students to submit theses or dissertations as electronic documents. However, nurse scholars underutilize ETDs, as evidenced by perusing bibliographic citation lists in many of the research journals. ETDs can be searched for and retrieved through several digital resources such as the Networked Digital Library of Theses and Dissertations (http://www.ndltd.org), ProQuest Dissertations and Theses (http://www.umi.com), the Australasian Digital Theses Program (http://adt.caul.edu.au/) and through individual university web sites and online catalogues. An international repository of ETDs benefits the community of nurse scholars in many ways. The ability to access recent graduate students' research electronically from anywhere in the world is advantageous. For scholars residing in developing countries, access to these ETDs may prove to be even more valuable. In some cases, ETDs are not available for worldwide access and can only be accessed through the university library from which the student graduated. Public access to university library ETD collections is not always permitted. Nurse scholars from both developing and developed countries could benefit from ETDs.

The cost of being valuable: predictors of extinction risk in marine invertebrates exploited as luxury seafood.

Science.gov (United States)

Purcell, Steven W; Polidoro, Beth A; Hamel, Jean-François; Gamboa, Ruth U; Mercier, Annie

2014-04-22

Extinction risk has been linked to biological and anthropogenic variables. Prediction of extinction risk in valuable fauna may not follow mainstream drivers when species are exploited for international markets. We use results from an International Union for Conservation of Nature Red List assessment of extinction risk in all 377 known species of sea cucumber within the order Aspidochirotida, many of which are exploited worldwide as luxury seafood for Asian markets. Extinction risk was primarily driven by high market value, compounded by accessibility and familiarity (well known) in the marketplace. Extinction risk in marine animals often relates closely to body size and small geographical range but our study shows a clear exception. Conservation must not lose sight of common species, especially those of high value. Greater human population density and poorer economies in the geographical ranges of endangered species illustrate that anthropogenic variables can also predict extinction risks in marine animals. Local-level regulatory measures must prevent opportunistic exploitation of high-value species. Trade agreements, for example CITES, may aid conservation but will depend on international technical support to low-income tropical countries. The high proportion of data deficient species also stresses a need for research on the ecology and population demographics of unglamorous invertebrates.

Smooth incidence maps give valuable insight into Q fever outbreaks in The Netherlands

Directory of Open Access Journals (Sweden)

Wim van der Hoek

2012-11-01

Full Text Available From 2007 through 2009, The Netherlands faced large outbreaks of human Q fever. Control measures focused primarily on dairy goat farms because these were implicated as the main source of infection for the surrounding population. However, in other countries, outbreaks have mainly been associated with non-dairy sheep and The Netherlands has many more sheep than goats. Therefore, a public discussion arose about the possible role of non-dairy (meat sheep in the outbreaks. To inform decision makers about the relative importance of different infection sources, we developed accurate and high-resolution incidence maps for detection of Q fever hot spots. In the high incidence area in the south of the country, full postal codes of notified Q fever patients with onset of illness in 2009, were georeferenced. Q fever cases (n = 1,740 were treated as a spatial point process. A 500 x 500 m grid was imposed over the area of interest. The number of cases and the population number were counted in each cell. The number of cases was modelled as an inhomogeneous Poisson process where the underlying incidence was estimated by 2-dimensional P-spline smoothing. Modelling of numbers of Q fever cases based on residential addresses and population size produced smooth incidence maps that clearly showed Q fever hotspots around infected dairy goat farms. No such increased incidence was noted around infected meat sheep farms. We conclude that smooth incidence maps of human notifications give valuable information about the Q fever epidemic and are a promising method to provide decision support for the control of other infectious diseases with an environmental source.

A quantum inspired model of radar range and range-rate measurements with applications to weak value measurements

Science.gov (United States)

Escalante, George

2017-05-01

Weak Value Measurements (WVMs) with pre- and post-selected quantum mechanical ensembles were proposed by Aharonov, Albert, and Vaidman in 1988 and have found numerous applications in both theoretical and applied physics. In the field of precision metrology, WVM techniques have been demonstrated and proven valuable as a means to shift, amplify, and detect signals and to make precise measurements of small effects in both quantum and classical systems, including: particle spin, the Spin-Hall effect of light, optical beam deflections, frequency shifts, field gradients, and many others. In principal, WVM amplification techniques are also possible in radar and could be a valuable tool for precision measurements. However, relatively limited research has been done in this area. This article presents a quantum-inspired model of radar range and range-rate measurements of arbitrary strength, including standard and pre- and post-selected measurements. The model is used to extend WVM amplification theory to radar, with the receive filter performing the post-selection role. It is shown that the description of range and range-rate measurements based on the quantum-mechanical measurement model and formalism produces the same results as the conventional approach used in radar based on signal processing and filtering of the reflected signal at the radar receiver. Numerical simulation results using simple point scatterrer configurations are presented, applying the quantum-inspired model of radar range and range-rate measurements that occur in the weak measurement regime. Potential applications and benefits of the quantum inspired approach to radar measurements are presented, including improved range and Doppler measurement resolution.

A Sustainable and Selective Roasting and Water-Leaching Process to Simultaneously Extract Valuable Metals from Low-Grade Ni-Cu Matte

Science.gov (United States)

Cui, Fuhui; Mu, Wenning; Wang, Shuai; Xin, Haixia; Xu, Qian; Zhai, Yuchun

2018-03-01

Due to stringent environmental requirements and the complex occurrence of valuable metals, traditional pyrometallurgical methods are unsuitable for treating low-grade nickel-copper matte. A clean and sustainable two-stage sulfating roasting and water-leaching process was used to simultaneously extract valuable metals from low-grade nickel-copper matte. Ammonium and sodium sulfate were used as sulfating agents. The first roasting temperature, mass ratio of ammonium sulfate to matte, roasting time, dosage of sodium sulfate, second roasting temperature and leaching temperature were studied. Under optimal conditions, 98.89% of Ni, 97.48% of Cu and 95.82% of Co, but only 1.34% of Fe, were extracted. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to reveal the sulfating mechanism during the roasting process.

Whole body measurements in Bavarian school children

International Nuclear Information System (INIS)

Schmier, H.; Berg, D.

1992-12-01

On behalf of the Bavarian State Ministry for State Development and Environmental Affairs measurements were conducted using the whole body counters at the Institute for Radiation Hygiene (of the Federal Office for Radiation Protection), and the Institute for Radiation Biology (of the GSF Research Centre for Environment and Health). Between September 1988 and July 1990 about 1600 school children from all over Bavaria were investigated for incorporated radiocesium. The aim of these measurements was to evaluate the whole body activity due to regionally differing soil contaminations in Bavaria following the accident in the nuclear power plant in Chernobyl and to assess the effective dose from an intake of radionuclides for the pupils by comparing the results of their WBC measurements with those of reference groups of children which underwent WBC examinations at regular intervals at both institutes since the middle of the year 1986. The results of the WBC measurements of those pupils who had not eaten mushrooms in the days before the measurement are in good agreement with the results of comparative measurements in children living in the regions of Munich and Frankfurt-am-Main. Based on these results an effective dose of 0,2 mSv for the Munich region children and of 0,1 mSv for Nothern Bavarian children can be derived. For children living in the highest contaminated region of Bavaria, i.e. the counties adjacent to the Alps, no comparable reference group results are available, but the amount of incorporated radiocesium is only twice that for pupils in the Munich region. The mean value for the specific activity of radiocesium in South Bavarian school children who consumed mushrooms was found to be twice the value of pupils who did not. This is also true for that group of children whose parents had bought allegedly low contaminated foodstuffs. Other effecs of nutrition habits on the specific whole body activity could not be found. (orig.) [de

"Make or buy" decisions in the production of health care goods and services: new insights from institutional economics and organizational theory.

Science.gov (United States)

Preker, A. S.; Harding, A.; Travis, P.

2000-01-01

A central theme of recent health care reforms has been a redefinition of the roles of the state and private providers. With a view to helping governments to arrive at more rational "make or buy" decisions on health care goods and services, we propose a conceptual framework in which a combination of institutional economics and organizational theory is used to examine the core production activities in the health sector. Empirical evidence from actual production modalities is also taken into consideration. We conclude that most inputs for the health sector, with the exception of human resources and knowledge, can be efficiently produced by and bought from the private sector. In the health services of low-income countries most dispersed production forms, e.g. ambulatory care, are already provided by the private sector (non-profit and for-profit). These valuable resources are often ignored by the public sector. The problems of measurability and contestability associated with expensive, complex and concentrated production forms such as hospital care require a stronger regulatory environment and skilled contracting mechanisms before governments can rely on obtaining these services from the private sector. Subsidiary activities within the production process can often be unbundled and outsourced. PMID:10916915

Activating Processes in the Brand Communication of Valuable Brands on the example of Coca-Cola.

OpenAIRE

Pöhler, Marie-Luise

2017-01-01

Everyone in the world, from the streets of Paris to the villages in Africa, knows the logo with the white letters that are written on a bright red background. Coca-Cola was introduced in 1886. In that year, only nine glasses of the soda drink were sold per day. So how did the little company from Atlanta become the world’s most valuable and popular soft drink? One of the company’s secrets is its emotional and memorable advertising strategies. Therefore, this thesis explains and analyzes ho...

The impact of endpoint measures in rheumatoid arthritis clinical trials

NARCIS (Netherlands)

van der Heide, A.; Jacobs, J. W.; Dinant, H. J.; Bijlsma, J. W.

1992-01-01

In clinical trials on the effectiveness of disease-modifying antirheumatic drugs (DMARDs) in patients with rheumatoid arthritis (RA), it is common to apply a large number of endpoint measures. This practice has several disadvantages. To determine which endpoint measures are most valuable, reports of

The cost of being valuable: predictors of extinction risk in marine invertebrates exploited as luxury seafood

OpenAIRE

Purcell, Steven W.; Polidoro, Beth A.; Hamel, Jean-François; Gamboa, Ruth U.; Mercier, Annie

2014-01-01

Extinction risk has been linked to biological and anthropogenic variables. Prediction of extinction risk in valuable fauna may not follow mainstream drivers when species are exploited for international markets. We use results from an International Union for Conservation of Nature Red List assessment of extinction risk in all 377 known species of sea cucumber within the order Aspidochirotida, many of which are exploited worldwide as luxury seafood for Asian markets. Extinction risk was primari...

Workload measurement: diagnostic imaging

Energy Technology Data Exchange (ETDEWEB)

Nuss, Wayne [The Prince Charles Hospital, Chermside, QLD (Australia). Dept. of Medical Imaging

1993-06-01

Departments of medical imaging, as with many other service departments in the health industry, are being asked to develop performance indicators. No longer are they assured that annual budget allocations will be forthcoming without justification or some output measurement indicators that will substantiate a claim for a reasonable share of resources. The human resource is the most valuable and the most expensive to any department. This paper provides a brief overview of the research and implementation of a radiographer workload measurement system that was commenced in the Brisbane North Health Region. 2 refs., 10 tabs.

Determination of commercially valuable characteristics of plant varieties for energetic use during the state examination

Directory of Open Access Journals (Sweden)

В. В. Баликіна

2014-12-01

Full Text Available The analysis of commercially valuable indices of plant varieties for energetic use was carried out and the necessity to determine energetic indices during the state scientific-and-technical examination is substantiated. In order to explain the requirements for registration of new varieties of energy crops concerning the defi nition of indices of ability for distribution, the collection of species and hybrid forms of willow was used. Factors that prove the economic and environmental advantages of energy willow cultivation for biofuel are specifi ed.

A pilot study to measure levels of selected elements in Thai foods by instrumental neutron activation analysis

International Nuclear Information System (INIS)

Laoharojanaphand, S.; Busamongkol, A.; Permnamtip, V.; Judprasong, K.; Chatt, A.

2012-01-01

A pilot study was carried out to evaluate the scope of instrumental neutron activation analysis (INAA) for measuring the levels of selected elements in a few commonly consumed food items in Thailand. Several varieties of rice, beans, aquatic food items, vegetables and soybean products were bought from major distribution centers in Bangkok, Thailand. Samples were prepared according to the protocols prescribed by the nutritionist for food compositional analysis. Levels of As, Br, Ca, Cd, Cl, Cr, Cu, Fe, K, Mg, Mn, and Zn were measured by INAA using the irradiation and counting facilities available at the Thai Research Reactor with the maximum in-core thermal neutron flux of 3 x 10 13 cm -2 s -1 of the Thailand Institute of Nuclear Technology in Bangkok. Selenium was determined by cyclic INAA using the Dalhousie University SLOWPOKE-2 Reactor facilities in Halifax, Canada at a thermal neutron flux of 2.5 x 10 11 cm -2 s -1 . Both cooked and uncooked foods were analyzed. The elemental composition of food products was found to depend significantly on the raw material as well as the preparation technique. (author)

Aequorin chimeras as valuable tool in the measurement of Ca2+ concentration during cadmium injury

International Nuclear Information System (INIS)

Biagioli, M.; Pinton, P.; Scudiero, R.; Ragghianti, M.; Bucci, S.; Rizzuto, R.

2005-01-01

The ability of cadmium to disrupt calcium homeostasis has been known since a long time, but the precise cellular targets of its toxic action are still debated. A great problem in the interpretation of data has been associated with the ability of cadmium to strongly bind traditional calcium probes. Aequorin, the well-characterized calcium-sensitive photoprotein, was used as intracellular calcium indicator during cadmium injury in NIH 3T3 murine fibroblasts. NIH 3T3 cells were transfected with a cDNA construct containing aequorin fused to a truncated glutamate receptor, which directs the probe to the outer surface of intracellular membranes. At first, we tested if different cadmium concentrations were able to modify the rate of light emission by aequorin showing that cadmium concentrations 2+ /Ca 2+ interference. To directly investigate the role of Cd 2+ in Ca 2+ homeostasis, we have started to selectively measure the free Ca 2+ concentration in different cell compartments. Here, we report that cadmium reduces the transient free calcium signal after stimulation of cells with bradykinin. Further studies are in progress to clarify the role of mitochondria and endoplasmic reticulum in cadmium-induced alterations of Ca 2+ homeostasis in order to link signal transduction modifications with the onset of apoptosis induced by cadmium exposure

Valuable Nutrients and Functional Bioactives in Different Parts of Olive (Olea europaea L.)—A Review

Science.gov (United States)

Ghanbari, Rahele; Anwar, Farooq; Alkharfy, Khalid M.; Gilani, Anwarul-Hassan; Saari, Nazamid

2012-01-01

The Olive tree (Olea europaea L.), a native of the Mediterranean basin and parts of Asia, is now widely cultivated in many other parts of the world for production of olive oil and table olives. Olive is a rich source of valuable nutrients and bioactives of medicinal and therapeutic interest. Olive fruit contains appreciable concentration, 1–3% of fresh pulp weight, of hydrophilic (phenolic acids, phenolic alchohols, flavonoids and secoiridoids) and lipophilic (cresols) phenolic compounds that are known to possess multiple biological activities such as antioxidant, anticarcinogenic, antiinflammatory, antimicrobial, antihypertensive, antidyslipidemic, cardiotonic, laxative, and antiplatelet. Other important compounds present in olive fruit are pectin, organic acids, and pigments. Virgin olive oil (VOO), extracted mechanically from the fruit, is also very popular for its nutritive and health-promoting potential, especially against cardiovascular disorders due to the presence of high levels of monounsaturates and other valuable minor components such as phenolics, phytosterols, tocopherols, carotenoids, chlorophyll and squalene. The cultivar, area of production, harvest time, and the processing techniques employed are some of the factors shown to influence the composition of olive fruit and olive oil. This review focuses comprehensively on the nutrients and high-value bioactives profile as well as medicinal and functional aspects of different parts of olives and its byproducts. Various factors affecting the composition of this food commodity of medicinal value are also discussed. PMID:22489153

Consumer acceptance of irradiated food products: an apple marketing study

International Nuclear Information System (INIS)

Terry, D.E.; Tabor, R.L.

1990-01-01

This study was exploratory in nature, with emphasis on initial purchases and not repeat purchases or long-term loyalties to either irradiated or non-irradiated produce. The investigation involved the actual sale of irradiated and non-irradiated apples to consumers. Limited information about the process was provided, and apples were sold at roadside stands. Prices for the irradiated apples were varied while the price for the non-irradiated apples was held constant. Of these 228 West-Central Missouri shoppers, 101 (44%) bought no irradiated apples, 86 (38%) bought only irradiated apples, and 41 (18%) bought some of both types, Results of probit regressions indicated three significant independent variables. There was an inverse relationship between the price of irradiated apples and the probability of purchasing irradiated apples. There was a positive relationship between the purchasers’ educational level and the probability of purchasing irradiated apples. Predicted probabilities for belonging to categories in probit models were computed. Depending on particular equation specification, correctly placed were approximately 70 percent of the purchasers of the two categories--bought only non-irradiated apples, or bought some of both irradiated and non-irradiated apples or only irradiated apples. This study suggests that consumers may be interested in food irradiation as a possible alternative or supplement to current preservation techniques

Recycled Cell Phones - A Treasure Trove of Valuable Metals

Science.gov (United States)

Sullivan, Daniel E.

2006-01-01

This U.S. Geological Survey (USGS) Fact Sheet examines the potential value of recycling the metals found in obsolete cell phones. Cell phones seem ubiquitous in the United States and commonplace throughout most of the world. There were approximately 1 billion cell phones in use worldwide in 2002. In the United States, the number of cell phone subscribers increased from 340,000 in 1985 to 180 million in 2004. Worldwide, cell phone sales have increased from slightly more than 100 million units per year in 1997 to an estimated 779 million units per year in 2005. Cell phone sales are projected to exceed 1 billion units per year in 2009, with an estimated 2.6 billion cell phones in use by the end of that year. The U.S. Environmental Protection Agency estimated that, by 2005, as many as 130 million cell phones would be retired annually in the United States. The nonprofit organization INFORM, Inc., anticipated that, by 2005, a total of 500 million obsolete cell phones would have accumulated in consumers' desk drawers, store rooms, or other storage, awaiting disposal. Typically, cell phones are used for only 1 1/2 years before being replaced. Less than 1 percent of the millions of cell phones retired and discarded annually are recycled. When large numbers of cell phones become obsolete, large quantities of valuable metals end up either in storage or in landfills. The amount of metals potentially recoverable would make a significant addition to total metals recovered from recycling in the United States and would supplement virgin metals derived from mining.

Resource specialization, customer orientation, and firm performance: an empirical investigation of valuable resources

DEFF Research Database (Denmark)

Sørensen, Hans Eibe

2011-01-01

This study contributes to the strategic marketing research by empirically investigating the role of customer orientation in explaining how firms leverage their specialized but vulnerable resources. The aim is thus to explore a subset of the means by which resources become valuable to the firm...... – the first criterion for a strategic resource. Hypotheses are developed and tested using CEO questionnaire responses from a sample of manufacturing firms and census accounting data. The results show that there is a strong link between industry-specific resources and return on assets for firms with high...... levels of customer orientation. We also report that firm-specific resources are unrelated to firm performance and that a customer orientation – investigated in isolation, may be detrimental to firm performance. Research and managerial implications are discussed....

Evaluation of measures of urinary albumin excretion

NARCIS (Netherlands)

Gansevoort, Ronald T.; Brinkman, Jacoline; Bakker, Stephan J. L.; De Jong, Paul E.; de Zeeuw, Dick

2006-01-01

Albuminuria has recently drawn much attention as a valuable risk marker for cardiovascular and renal disease progression. Albuminuria can be measured and expressed in several ways: 1) in a spot morning urine sample as urinary albumin concentration (mg/liter) or albumin:creatinine ratio (mg/mmol) and

Recovery of valuable metals from polymetallic mine tailings by natural microbial consortium.

Science.gov (United States)

Vardanyan, Narine; Sevoyan, Garegin; Navasardyan, Taron; Vardanyan, Arevik

2018-05-28

Possibilities for the recovery of non-ferrous and precious metals from Kapan polymetallic mine tailings (Armenia) were studied. The aim of this paper was to study the possibilities of bioleaching of samples of concentrated tailings by the natural microbial consortium of drainage water. The extent of extraction of metals from the samples of concentrated tailings by natural microbial consortium reached 41-55% and 53-73% for copper and zinc, respectively. Metal leaching efficiencies of pure culture Leptospirillum ferrooxidans Teg were higher, namely 47-93% and 73-81% for copper and zinc, respectively. The content of gold in solid phase of tailings increased about 7-16% and 2-9% after bio-oxidation process by L. ferrooxidans Teg and natural microbial consortium, respectively. It was shown that bioleaching of the samples of tailings could be performed using the natural consortium of drainage water. However, to increase the intensity of the recovery of valuable metals, natural consortium of drainage water combined with iron-oxidizing L. ferrooxidans Teg has been proposed.

A Pilot Study on Measuring Customer’s Satisfaction Level

Directory of Open Access Journals (Sweden)

Vide Boltez

2013-01-01

Full Text Available RQ: Determine the level of customer satisfaction of a company’s products and services to obtain information on needed improvements.Purpose: The purpose of measuring customer’s satisfaction level is to obtain information directly from the final buyer that bought our product. The next step is to analyze the information obtained and to take the results into consideration to improve the working process in production and in other departments of the company.Method: The method used for the pilot study to measure customer satisfaction was a short questionnaire that was given to 10 customers of our product and 10 completed questionnaires were obtained.Results: The results showed the level of satisfaction of final buyers of roof tiles and roofs that the company has achieved through their products and services. The results facilitate the production, logistics, purchasing and sales department to obtain information on positive satisfaction levels and areas that need change. At the same time, the final buyer was identified (i.e., name, surname, address, and so forth, which up until now had not been.Organization: The organization will save time and money in the future, because it will continuously measure customer satisfaction to improve production and other departments in the organization towards creating satisfied customers.Society: Final buyers of roofs are, and will be, more satisfied with their decisions, because the organization carries out after-sales satisfaction levels.Originality: The research was original, because up to this date the organization has not conducted research in such a manner.Limitations: The pilot study used 10 completed questionnaires that represent a very small sample to make any generalizations.

Election malpractice in students union government of Nnamdi ...

African Journals Online (AJOL)

Results also showed the preventive measures of election malpractices to include amongst others that votes should not be bought with money or gift items; the electoral body should be well trained and continued to be trained and materials for elections must be adequate and distributed on time. The implications of the study ...

Determination of Mercury in Fish: A Low-Cost Implementation of Cold-Vapor Atomic Absorbance for the Undergraduate Environmental Chemistry Laboratory

Science.gov (United States)

Niece, Brian K.; Hauri, James F.

2013-01-01

Mercury is a known neurotoxin that is particularly harmful to children and unborn fetuses. Consumption of contaminated fish is one major route of mercury exposure. This laboratory experiment gives students an opportunity to measure mercury concentrations in store-bought seafood and compare the results to suggested exposure limits. The U.S.…

Cine MR CSF flow study in hydrocephalus: What are the valuable parmeters?

International Nuclear Information System (INIS)

Choi, Hye Young; Kim, Myung Hyun

1997-01-01

To evaluate the changes in diagnosis of intracranial cerebrospinal fluid (CSF) dynamics in the hydrocephalus, we studied the various parameters of cine phase contrast (PC) magnetic resonance (MR) CSF flow images in cases of acutely progressive hydrocephalus, comparing them with those in normal CSF circulation. The MR images were obtained with a 1.5T (GE Signa, GE Medical Systems, Milwaukee, USA) unit using the 2 dimensional cine PC sequence with peripheral gating and gradient recalled echo imaging in ten cases of non-obstructive hydrocephalus(NOH), three of obstructive hydrocephalus(OH), and ten controls. The time-echo time-flip angle employed were 50 to 80 msec-11 to 15 msec-12 to 15 degrees. Temporal velocity information relating to cervical pericord CSF spaces, third and fourth ventricles, and the aqueduct were plotted as wave forms which were then analyzed for configuration, amplitude parameters(Vmax, Vmin, Vdif), and temporal parameters(R-S, R-SMV, R-D, R-DMV). The statistical significance of each parameter was examined using the paired t-test. All patients with OH underwent endoscopic third ventriculostomy, whereas all with NOH underwent shunting procedures. In five ROIs, distinct reproducible configuration features were obtained at aqueduct and cervical pericord spaces, but not at ventricular levels. We determined the statistically significant differences between controls and hydrocephalus patients using temporal, rather than amplitude parameters. In NOH, the graph showed R-DMV shortening (p<0.01) at the anterior cervical pericord space. In OH, there were R-DMV shortening (p<0.05) was seen at the anterior cervical pericord space, and R-DMV shortening (p<0.02) at the posterior cervical pericord space. In one case of OH, a typical change of configuration, mirror image, was obtained at aqueduct level, and in all OH cases, the level of obstruction could be determined. The results of cine PC MR CSF flow study may be valuable for points for determining the level

A statistical analysis of the freshness of postharvest leafy vegetables with application of water based on chlorophyll fluorescence measurement

Directory of Open Access Journals (Sweden)

Yichen Qiu

2017-12-01

Full Text Available Vegetable freshness is very important for both restaurant and home consumers. In market, sellers frequently apply water to leafy vegetables to make them not lose weight and look fresh; however, these vegetables may not be stored for a long time as they appear. After a time limit, they may be quickly rotten. It is thus meaningful to investigate early and simple detection tools to measure leafy vegetable freshness while they are frequently applied water in selling. In this work, three types of newly harvested leafy vegetables were bought from a local farmer market and stored in the air with room temperature and roots submerging in water. Chlorophyll a fluorescence (ChlF from the vegetables was measured each half a day for three days. The obtained ChlF data were analyzed statistically and the correlation of ChlF parameters and vegetable freshness/storage time was obtained. The k-mean classification was also performed. It is found that Fo, Fj, Fm/Fo, and Fv/Fm can be used as an early detection tool to differentiate the freshness of leafy vegetables on which water is constantly applied in storage without visible difference. Keywords: Vegetable freshness, Chlorophyll fluorescence, Food measurement

Rabeto plus: a valuable drug for managing functional dyspepsia.

Science.gov (United States)

Ghosh, Asim; Halder, Susanta; Mandal, Sanjoy; Mandal, Arpan; Basu, Mitali; Dabholkar, Pareen

2008-11-01

The aim of the study was to evaluate and document the efficacy and tolerability of rabeto plus (FDC of rabeprazole and itopride) in management of functional dyspepsia. It was an open, prospective, non-comparative, multidose study. The patients with functional dyspepsia (NERD or non-erosive reflux disease) attending OPD of a leading, tertiary care, teaching hospital in West Bengal (BS Medical College, Bankura) were inducted in the study. A total of 46 adult patients of either sex with functional dyspepsia and a clinical diagnosis of NERD were given 1 capsule of rabeto plus before breakfast, for up to 4 weeks. Primary efficacy variables were relief from symptoms of heartburn, nausea, vomiting, waterbrash and fullness. Secondary efficacy variables were global assessment of efficacy and toleration by patients and treating physicians. The tolerability was assessed on the basis of record of spontaneously reported adverse events with their nature, intensity and outcome. Out of 55 patients enrolled in the study, 46 completed the study as planned, while 9 patients were lost to follow-up (dropped). Most patients reported near total symptom relief by the end of study. Total symptom score showed remarkable and significant improvement from baseline to end of the study. Importantly, none of the patients reported any side-effect. All participants tolerated the drug well. Moreover, response to study drug was rated as excellent or good by over 93% patients and their treating physicians. This means that 9 out 10 patients receiving rabeto plus reported desired symptom relief from dyspepsia. Thus it was concluded that rabeto plus is a valuable drug for treatment of functional dyspepsia or NERD.

Multiple Social Networks, Data Models and Measures for

DEFF Research Database (Denmark)

Magnani, Matteo; Rossi, Luca

2017-01-01

Multiple Social Network Analysis is a discipline defining models, measures, methodologies, and algorithms to study multiple social networks together as a single social system. It is particularly valuable when the networks are interconnected, e.g., the same actors are present in more than one...

The Beer Lambert Law Measurement Made Easy

Science.gov (United States)

Onorato, Pasquale; Gratton, Luigi M.; Polesell, Marta; Salmoiraghi, Alessandro; Oss, Stefano

2018-01-01

We propose the use of a smartphone based apparatus as a valuable tool for investigating the optical absorption of a material and to verify the exponential decay predicted by Beer's law. The very simple experimental activities presented here, suitable for undergraduate students, allows one to measure the material transmittance including its…

Ice sheet anisotropy measured with polarimetric ice sounding radar

DEFF Research Database (Denmark)

Dall, Jørgen

2010-01-01

For polar ice sheets, valuable stress and strain information can be deduced from crystal orientation fabrics (COF) and their prevailing c-axis alignment. Polarimetric radio echo sounding is a promising technique to measure the anisotropic electromagnetic propagation and reflection properties asso...

Process for the extraction of valuable products from coals, pitches, mineral oils, and the like

Energy Technology Data Exchange (ETDEWEB)

1936-06-05

A process is described for the treating of coke, lignite, peat, etc., and mineral oils with the help of hydrogen or other reducing gases and under pressure to recover valuable hydrocarbons, characterized by the carbonaceous substances and the reducing gas coming together already heated totally or in part at least from 350/sup 0/C to the temperature necessary for the reaction. The substances to be treated becoming extracted in the form of paste or liquid from the reaction chamber and then returned to it and being reacted outside the reaction zone in the presence of the reducing gases at the temperature necessary for the reaction.

FAMILY THOUGHT IN THE RUSSIAN LANGUAGE MODEL OF THE WORLD: HISTORY OF THE VALUABLE RELATION TO A FAMILY ACCORDING TO RUSSIAN

Directory of Open Access Journals (Sweden)

G. S. Samoylova

2016-01-01

Full Text Available The article consider the structure of a word meaning a family in diachronic aspect. The valuable attitude towards concept «family» is characteristic of the entire periods in the history of Russian, and transformation of semantics of the word concept is insignificant. The central idea in definition of a family in modern Russian is the idea of spiritual proximity of people, the close emotional relations. The word is actively used in figurative sense for expression of estimated meanings. In a different way there is a history of values of the terms of relationship entering a theme group «family». In modern Russian these words cease to express a positive emotional assessment at the use in relation to not relatives. According to authors, it demonstrates change of valuable reference points in a modern language picture of the world.

Line lessons: Enbridge's Northern Line provides valuable information

Energy Technology Data Exchange (ETDEWEB)

Ross, E.

2000-02-01

Experiences gained from the 14-year old Norman Wells crude oil pipeline in the Northwest Territories may provide operators with valuable insights in natural gas pipeline developments in northern Canada. The Norman Wells line is the first and only long-distance pipeline in North America buried in permafrost and has proven to be a veritable laboratory on pipeline behaviour in extremely cold climates which also happen to be discontinuous at the same time. The line was built by Enbridge with a 'limit state' design, i e. it was built to move within the permafrost within certain limits, the amount of movement depending upon the area in which the line was built. This technology, which is still cutting edge, allows the pipeline to react to the freeze-thaw cycle without being affected by the heaving and resettling. The knowledge gained from the Norman Wells Line has come in very useful in the more recent AltaGas Services project transporting natural gas from a nearby well into the the town of Inuvik. Enbridge also contributed to the development of various pipeline inspection tools such as the 'Geopig' which travels within the pipeline and can pinpoint the location of problems practically within a matter of inches, and the 'Rolligon' an amphibious vehicle with five-foot diameter rubber tires that displaces only two pounds per square inch, leaving barely a track as it travels along the right-of-way during times other than winter.

Optimal provisioning strategies for slow moving spare parts with small lead times

NARCIS (Netherlands)

Teunter, R.H.; Klein Haneveld, W.K.

When an expensive piece of equipment is bought, spare parts can often be bought at a reduced price. A decision must be made about the initial provisioning of spare parts. Furthermore, if at a certain time the stock drops to zero, because a number of failures have occurred, a decision must be made

Measurement cross sections for radioisotopes production

International Nuclear Information System (INIS)

Garrido, E.

2011-01-01

New radioactive isotopes for nuclear medicine can be produced using particle accelerators. This is one goal of Arronax, a high energy - 70 MeV - high intensity - 2*350 μA - cyclotron set up in Nantes. A priority list was established containing β - - 47 Sc, 67 Cu - β + - 44 Sc, 64 Cu, 82 Sr/ 82 Rb, 68 Ge/ 68 Ga - and α emitters - 211 At. Among these radioisotopes, the Scandium 47 and the Copper 67 have a strong interest in targeted therapy. The optimization of their productions required a good knowledge of their cross-sections but also of all the contaminants created during irradiation. We launched on Arronax a program to measure these production cross-sections using the Stacked-Foils' technique. It consists in irradiating several groups of foils - target, monitor and degrader foils - and in measuring the produced isotopes by γ-spectrometry. The monitor - nat Cu or nat Ni - is used to correct beam loss whereas degrader foils are used to lower beam energy. We chose to study the nat Ti(p,X) 47 Sc and 68 Zn(p,2p) 67 Cu reactions. Targets are respectively natural Titanium foil - bought from Goodfellow - and enriched Zinc 68 deposited on Silver. In the latter case, Zn targets were prepared in-house - electroplating of 68 Zn - and a chemical separation between Copper and Gallium isotopes has to be made before γ counting. Cross-section values for more than 40 different reactions cross-sections have been obtained from 18 MeV to 68 MeV. A comparison with the Talys code is systematically done. Several parameters of theoretical models have been studied and we found that is not possible to reproduce faithfully all the cross-sections with a given set of parameters. (author)

Recovery of valuable products from the raffinate of uranium and thorium pilot-plant

International Nuclear Information System (INIS)

Martins, E.A.J.

1990-01-01

IPEN-CNEN/SP has being very active in refining yellow cake to pure ammonium diuranate which is converted to uranium trioxide, uranium dioxide, uranium tetra-and hexa-fluoride in sequential way. The technology of the thorium purification and its conversion to nuclear grade products has been a practice since several years as well. For both elements the major waste to be worked is the raffinate from purification via TBP-varsol in pulsed columns. In this paper the actual processing technology is reviewed with special emphasis on the recovery of valuable products, mainly nitric acid, ammonium nitrate, uranium, thorium and rare earth elements. Ammonium nitrate from the precipitation of uranium diuranate is of good quality, being radioactivity and uranium-free, and recommended to be applied as fertilizer. In conclusion the main effort is to maximize the recycle and reuse of the above mentioned chemicals. (author)

Measuring mid-rapidity multiplicity in PHOBOS

Science.gov (United States)

Iordanova, Aneta; Back, B. B.; Baker, M. D.; Ballintijn, M.; Barton, D. S.; Betts, R. R.; Bickley, A. A.; Bindel, R.; Busza, W.; Carroll, A.; Chai, Z.; Decowski, M. P.; García, E.; Gburek, T.; George, N.; Gulbrandsen, K.; Halliwell, C.; Hamblen, J.; Hauer, M.; Henderson, C.; Hofman, D. J.; Hollis, R. S.; Holynski, R.; Holzman, B.; Iordanova, A.; Johnson, E.; Kane, J. L.; Khan, N.; Kulinich, P.; Kuo, C. M.; Lin, W. T.; Manly, S.; Mignerey, A. C.; Nouicer, R.; Olszewski, A.; Pak, R.; Reed, C.; Roland, C.; Roland, G.; Sagerer, J.; Seals, H.; Sedykh, I.; Smith, C. E.; Stankiewicz, M. A.; Steinberg, P.; Stephans, G. S. F.; Sukhanov, A.; Tonjes, M. B.; Trzupek, A.; Vale, C.; van Nieuwenhuizen, G. J.; Vaurynovich, S. S.; Verdier, R.; Veres, G. I.; Wenger, E.; Wolfs, F. L. H.; Wosiek, B.; Wozniak, K.; Wyslouch, B.; PHOBOS Collaboration

2005-01-01

Several techniques have been developed by PHOBOS for measuring the multiplicity of charged particles produced in Au + Au collisions. We will discuss one of these techniques (the 'Tracklet' method) which utilizes two-hit tracks which intersect at the reconstructed collision vertex position. The physics that comes from these measurements can give valuable insight into the underlying mechanisms of particle production over a center of mass energy range of surdSNN = 19.6 GeV to the maximum RHIC energy of surdSNN = 200 GeV.

Recovery of Palm Oil and Valuable Material from Oil Palm Empty Fruit Bunch by Sub-critical Water.

Science.gov (United States)

Ahmad Kurnin, Nor Azrin; Shah Ismail, Mohd Halim; Yoshida, Hiroyuki; Izhar, Shamsul

2016-01-01

Oil palm empty fruit bunch (EFB) is one of the solid wastes produced in huge volume by palm oil mill. Whilst it still contains valuable oil, approximately 22.6 million tons is generated annually and treated as solid waste. In this work, sub-critical water (sub-cw) was used to extract oil, sugar and tar from spikelet of EFB. The spikelet was treated with sub-cw between 180-280°C and a reaction time of 2 and 5 minutes. The highest yield of oil was 0.075 g-oil/g-dry EFB, obtained at 240°C and reaction time of 5 minutes. Astonishingly, oil that was extracted through this method was 84.5% of that obtained through Soxhlet method using hexane. Yield of oil extracted was strongly affected by the reaction temperature and time. Higher reaction temperature induces the dielectric constant of water towards the non-polar properties of solvent; thus increases the oil extraction capability. Meanwhile, the highest yield of sugar was 0.20 g-sugar/g-dry EFB obtained at 220°C. At this temperature, the ion product of water is high enough to enable maximum sub-critical water hydrolysis reaction. This study showed that oil and other valuable material can be recovered using water at sub-critical condition, and most attractive without the use of harmful organic solvent.

Kidney Paired Donation and the "Valuable Consideration" Problem: The Experiences of Australia, Canada, and the United States.

Science.gov (United States)

Toews, Maeghan; Giancaspro, Mark; Richards, Bernadette; Ferrari, Paolo

2017-09-01

As organ donation rates remain unable to meet the needs of individuals waiting for transplants, it is necessary to identify reasons for this shortage and develop solutions to address it. The introduction of kidney paired donation (KPD) programs represents one such innovation that has become a valuable tool in donation systems around the world. Although KPD has been successful in increasing kidney donation and transplantation, there are lingering questions about its legality. Donation through KPD is done in exchange for-and with the expectation of-a reciprocal kidney donation and transplantation. It is this reciprocity that has caused concern about whether KPD complies with existing law. Organ donation systems around the world are almost universally structured to legally prohibit the commercial exchange of organs. Australia, Canada, and the United States have accomplished this goal by prohibiting the exchange of an organ for "valuable consideration," which is a legal term that has not historically been limited to monetary exchange. Whether or not KPD programs violate this legislative prohibition will depend on the specific legislative provision being considered, and the legal system and case law of the particular jurisdiction in question. This article compares the experiences of Australia, Canada, and the United States in determining the legality of KPD and highlights the need for legal clarity and flexibility as donation and transplantation systems continue to evolve.

Acquisitions as lotteries? : The selection of target-firm risk and its impact on merger outcomes

NARCIS (Netherlands)

Schneider, C.A.R.; Spalt, Oliver

2017-01-01

From 1987 to 2008, riskier firms were more likely to be taken over. Yet, on average, the acquirer declined in value by 2.8% when it bought a "risky target" (the third tercile, having an annualized idiosyncratic volatility of 61% or more), but only by 0.6% when it bought a "safe target" (the first

Consumer Brand Choice: Money Allocation as a Function of Brand Reinforcing Attributes

Science.gov (United States)

Oliveira-Castro, Jorge M.; Foxall, Gordon R.; Wells, Victoria K.

2010-01-01

Previous applications of the matching law to the analysis of consumer brand choice have shown that the amount of money spent purchasing a favorite brand tends to match the quantity bought of the favorite brand divided by the quantity bought of all other brands. Although these results suggest matching between spending and purchased quantity,…

Interferon-γ, a valuable surrogate marker of Plasmodium falciparum pre-erythrocytic stages protective immunity

Directory of Open Access Journals (Sweden)

BenMohamed Lbachir

2011-02-01

Full Text Available Abstract Immunity against the pre-erythrocytic stages of malaria is the most promising, as it is strong and fully sterilizing. Yet, the underlying immune effectors against the human Plasmodium falciparum pre-erythrocytic stages remain surprisingly poorly known and have been little explored, which in turn prevents any rational vaccine progress. Evidence that has been gathered in vitro and in vivo, in higher primates and in humans, is reviewed here, emphasizing the significant role of IFN-γ, either as a critical immune mediator or at least as a valuable surrogate marker of protection. One may hope that these results will trigger investigations in volunteers immunized either by optimally irradiated or over-irradiated sporozoites, to quickly delineate better surrogates of protection, which are essential for the development of a successful malaria vaccine.

Statistical sampling for holdup measurement

International Nuclear Information System (INIS)

Picard, R.R.; Pillay, K.K.S.

1986-01-01

Nuclear materials holdup is a serious problem in many operating facilities. Estimating amounts of holdup is important for materials accounting and, sometimes, for process safety. Clearly, measuring holdup in all pieces of equipment is not a viable option in terms of time, money, and radiation exposure to personnel. Furthermore, 100% measurement is not only impractical but unnecessary for developing estimated values. Principles of statistical sampling are valuable in the design of cost effective holdup monitoring plans and in qualifying uncertainties in holdup estimates. The purpose of this paper is to describe those principles and to illustrate their use

The Beer Lambert law measurement made easy

Science.gov (United States)

Onorato, Pasquale; Gratton, Luigi M.; Polesello, Marta; Salmoiraghi, Alessandro; Oss, Stefano

2018-05-01

We propose the use of a smartphone based apparatus as a valuable tool for investigating the optical absorption of a material and to verify the exponential decay predicted by Beer’s law. The very simple experimental activities presented here, suitable for undergraduate students, allows one to measure the material transmittance including its dependence on the incident radiation wavelength.

Cashew nut shell liquid, a valuable raw material for generating semiconductive polyaniline nanofibers

Directory of Open Access Journals (Sweden)

Raiane Valenti Gonçalves

2018-03-01

Full Text Available Abstract Cashew nut shell liquid (CNSL is an abundant and renewable by-product of the cashew nut industry. It appears to be a valuable raw material for generating semiconductive polyaniline (PAni nanomaterial with enhanced thermal stability and well-defined nanofiber morphology following a polymerization dispersion process. This study confirms that CNSL acts as a soft template during PAni synthesis, leading to an improvement in the nanofiber aspect. CNSL also improves the thermal stability of the PAni nanomaterial. Moreover, CNSL is an effective surfactant that promotes and stabilizes the dispersion of PAni nanofibers within water, allowing the more ecofriendly preparation of PAni nanomaterial by substituting the commonly used organic solvent with aqueous media. Finally, although CNSL promotes the formation of the conductive emeraldine salt form of PAni, increasing CNSL concentrations appear to plasticize the PAni polymer, leading to reduced electrical conductivity. However, this reduction is not detrimental, and PAni nanofibers remain semiconductive even under high CNSL concentrations.

Undecylenic acid: a valuable and physiologically active renewable building block from castor oil.

Science.gov (United States)

Van der Steen, Marijke; Stevens, Christian V

2009-01-01

A lot of attention is currently being paid to the transition to a biobased economy. In this movement, most efforts concentrate on the development of bioenergy applications including bioethanol, biodiesel, thermochemical conversion of biomass, and others. However, in the energy sector other nonbiomass alternatives are known, whereas no valuable alternatives are available when thinking about chemical building blocks. Therefore, it is also essential to develop new routes for the synthesis of bio-based chemicals and materials derived thereof. Such intermediates can originate either from plants or from animals. Castor oil is a non-edible oil extracted from the seeds of the castor bean plant Ricinus communis (Euphorbiaceae), which grows in tropical and subtropical areas. Globally, around one million tons of castor seeds are produced every year, the leading producing areas being India, PR China, and Brazil.2 10-Undecenoic acid or undecylenic acid is a fatty acid derived from castor oil that, owing to its bifunctional nature, has many possibilities to develop sustainable applications.

Professional regulation: a potentially valuable tool in responding to "stem cell tourism".

Science.gov (United States)

Zarzeczny, Amy; Caulfield, Timothy; Ogbogu, Ubaka; Bell, Peter; Crooks, Valorie A; Kamenova, Kalina; Master, Zubin; Rachul, Christen; Snyder, Jeremy; Toews, Maeghan; Zoeller, Sonja

2014-09-09

The growing international market for unproven stem cell-based interventions advertised on a direct-to-consumer basis over the internet ("stem cell tourism") is a source of concern because of the risks it presents to patients as well as their supporters, domestic health care systems, and the stem cell research field. Emerging responses such as public and health provider-focused education and national regulatory efforts are encouraging, but the market continues to grow. Physicians play a number of roles in the stem cell tourism market and, in many jurisdictions, are members of a regulated profession. In this article, we consider the use of professional regulation to address physician involvement in stem cell tourism. Although it is not without its limitations, professional regulation is a potentially valuable tool that can be employed in response to problematic types of physician involvement in the stem cell tourism market. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Recovery of valuable products in liquid effluents from uranium and thorium pilot units

International Nuclear Information System (INIS)

Jardim, E.A.; Abrao, A.

1988-01-01

IPEN-CNEN/SP has being very active in refining yellowcake to pure ammonium diuranate which is converted to uranium trioxide, uranium dioxide, uranium tetra- and hexafluoride in a sequential way. The technology of the thorium purification and its conversion to nuclear grade products has been a practice since several years as well. For both elements the major waste to be worked is the refinate from the solvent extraction column where uranium and thorium are purified via TBP-varsol in pulsed columns. In this paper the actual processing technology is reviewed with special emphasis on the recovery of valuable products, mainly nitric acid and ammonium nitrate. Distilled nitric acid and the final sulfuric acid as residue are recycle. Ammonium nitrate from the precipitation of uranium diuranate is of good quality, being radioactivity and uranium-free, and recommended to be applied as fertilizer. In conclusion the main effort is to maximise the recycle and reuse of the abovementioned chemicals. (author) [pt

Problems of Legal Regulation of Criminal Responsibility for Illegal Plunder and Circulation of Especially Valuable Strains of Cattle

Directory of Open Access Journals (Sweden)

Bavsun M. V.

2014-10-01

Full Text Available The article deals with the disputable issues in legal regulation of criminal responsibility for plunder and circulation of especially valuable strains of wild cattle, acting as a subject of legal and criminal protection, Art. 258.1 of the RF CC (Criminal Code of the Russian Federation. As a conclusion the author offers the variant of proposals for improvement of legislative construction of the norm considered on the ground of the analysis conducted

VALUABLE AND ORIENTATION FOUNDATIONS OF EDUCATIONAL SYSTEM OF THE COUNTRY

Directory of Open Access Journals (Sweden)

Vladimir I. Zagvyazinsky

2016-01-01

Full Text Available The aim of the investigation is to show that in modern market conditions it is necessary to keep humanistic valuable and orientation installations of domestic education and not to allow its slipping on a line item of utilitarian, quickly achievable, but not long-term benefits. Theoretical significance. The author emphasizes value of forming of an ideal – harmonious development of the personality – and the collectivist beginnings for disclosure of potential of each school student, a student, a worker, a specialist; also the author emphasizes on requirement of the stimulating, but not strictly regulated management of education. It is proved that copying of the western model of consecutive individualization of education without preserving the collectivist beginning is unacceptable in training, especially in educational process. In more general, strategic foreshortening this means that parity of the problem resolution of economy and the social sphere with which it is impossible to cope without support and educational development and first of all education, it is especially important during the periods of economic crises and stagnation for providing an exit from a crisis state on the basis of the advancing preparation and rational use of the personnel which neatly are considered as a human capital. Practical significance. Resources and positive tendencies in a development of education, especially elite, and also educational systems of some territories, including the Tyumen region where traditions of the enthusiasts-pioneers mastering the remote territories of oil and gas fields remain are shown. 

Reactor Gamma Heat Measurements with Calorimeters and Thermoluminescence Dosimeters

DEFF Research Database (Denmark)

Haack, Karsten; Majborn, Benny

1973-01-01

Intercomparison measurements of reactor γ-ray heating were carried out with calorimeters and thermoluminescence dosimeters. Within the measurement uncertainties the two methods yield coincident results. In the actual measurement range thermoluminescence dosimeters are less accurate than calorimet......Intercomparison measurements of reactor γ-ray heating were carried out with calorimeters and thermoluminescence dosimeters. Within the measurement uncertainties the two methods yield coincident results. In the actual measurement range thermoluminescence dosimeters are less accurate than...... calorimeters, but possess advantages such as a small probe size and the possibility of making simultaneous measurements at many different positions. Hence, thermoluminescence dosimeters may constitute a valuable supplement to calorimeters for reactor γ-ray heating measurements....

Using Psychodynamic Interaction as a Valuable Source of Information in Social Research

Directory of Open Access Journals (Sweden)

Camilla Schmidt

2012-11-01

Full Text Available This article will address the issue of using understandings of psychodynamic interrelations as a means to grasp how social and cultural dynamics are processed individually and collectively in narratives. I apply the two theoretically distinct concepts of inter- and intrasubjectivity to gain insight into how social and cultural dynamics are processed as subjective experiences and reflected in the interrelational space created in narrative interviews with trainee social educators. By using a combination of interactionist theory and psychosocial theory in the analysis of an interview with a student of social education, I demonstrate how the often conflicting demands and expectations are being played out in the interrelational tension between the researcher (myself and the interviewee or narrator. In a confrontation with “inner” expectations and concerns regarding a future profession and one’s ability to cope, and the “outer” socially and culturally embedded discourses as they are played out in the objectives of self-development and education, the narrative about a forthcoming internship is filled with tension and contradiction. In this article I will demonstrate how such tensions and contradictions are valuable sources of information in understanding the process of becoming a social educator.

Production of Valuables Organic Acids from Organic Wastes with Hydrothermal Treatment Process

Directory of Open Access Journals (Sweden)

Muhammad Faisal

2009-06-01

Full Text Available This article reports production of valuables organic acids from the hydrothermal treatment of representative organic wastes and compounds (i. e. domestic sludge, proteinaceous, cellulosic and plastic wastes with or without oxidant (H2O2. Organic acids such as acetic, formic, propionic, succinic and lactic acids were obtained in significant amounts. At 623 K (16.5 MPa, acetic acid of about 26 mg/g-dry waste fish entrails was obtained. This increased to 42 mg/g dry waste fish entrails in the presence of H2O2. Experiments on glucose to represent cellulosic wastes were also carried out, getting acetic acid of about 29 mg/g-glucose. The study was extended to terephthalic acid and glyceraldehyde, reaction intermediates of hydrothermal treatment of PET plastic wastes and glucose, respectively. Studies on temperature dependence of formation of organic acids showed thermal stability of acetic acid, whereas, formic acid decomposed readily under hydrothermal conditions. In general, results demonstrated that the presence of oxidants favored formation of organic acids with acetic acid being the major product. Keywords: hydrothermal treatment, organic acids, organic wastes, oxidant, supercritical water oxidation

Computation and measurement of air temperature distribution of an industrial melt blowing die

Directory of Open Access Journals (Sweden)

Wu Li-Li

2014-01-01

Full Text Available The air flow field of the dual slot die on an HDF-6D melt blowing non-woven equipment is computed numerically. A temperature measurement system is built to measure air temperatures. The computation results tally with the measured results proving the correctness of the computation. The results have great valuable significance in the actual melt blowing production.

Is radiofrequency ablation of varicose veins a valuable option? A systematic review of the literature with a cost analysis.

Science.gov (United States)

Poder, Thomas G; Fisette, Jean-François; Bédard, Suzanne K; Despatis, Marc-Antoine

2018-04-01

Since the 1990s, new techniques for the treatment of varicose veins have emerged, including radiofrequency ablation (RFA) and laser treatment. We performed a study to compare the safety, efficacy and outcomes of RFA compared to those of open surgery and laser ablation for the treatment of varicose veins. We also carried out a cost analysis of RFA compared to open surgery to assess whether RFA could help free up operating room time by being performed in an outpatient context. We conducted a systematic literature review (publication date May 2010-September 2013 for articles in English, January 1991-September 2013 for those in French). We used several checklists to measure the quality of the studies. We also collected data on costing. The literature search identified 924 publications, of which 38 were retained for analysis: 15 literature reviews, 1 good-practice guideline and 22 new primary studies. The overall level of evidence was low to moderate owing to the limited sample sizes, lack of information on patient characteristics and lack of standardization of the outcome measures. However, the results obtained are consistent from study to study. In the short and medium term, RFA is considered as effective as open surgery or laser treatment (moderate level of evidence) and presents fewer major and minor complications than open surgery (low level of evidence). Radiofrequency ablation can be performed on an outpatient basis. We calculated that RFA would be about $110-$220 more expensive per patient than open surgery. Radiofrequency ablation is a valuable alternative to open surgery and would free up operating room time in a context of low accessibility.

Is radiofrequency ablation of varicose veins a valuable option? A systematic review of the literature with a cost analysis

Science.gov (United States)

Fisette, Jean-François; Bédard, Suzanne K.; Despatis, Marc-Antoine

2018-01-01

Background Since the 1990s, new techniques for the treatment of varicose veins have emerged, including radiofrequency ablation (RFA) and laser treatment. We performed a study to compare the safety, efficacy and outcomes of RFA compared to those of open surgery and laser ablation for the treatment of varicose veins. We also carried out a cost analysis of RFA compared to open surgery to assess whether RFA could help free up operating room time by being performed in an outpatient context. Methods We conducted a systematic literature review (publication date May 2010–September 2013 for articles in English, January 1991–September 2013 for those in French). We used several checklists to measure the quality of the studies. We also collected data on costing. Results The literature search identified 924 publications, of which 38 were retained for analysis: 15 literature reviews, 1 good-practice guideline and 22 new primary studies. The overall level of evidence was low to moderate owing to the limited sample sizes, lack of information on patient characteristics and lack of standardization of the outcome measures. However, the results obtained are consistent from study to study. In the short and medium term, RFA is considered as effective as open surgery or laser treatment (moderate level of evidence) and presents fewer major and minor complications than open surgery (low level of evidence). Radiofrequency ablation can be performed on an outpatient basis. We calculated that RFA would be about $110–$220 more expensive per patient than open surgery. Conclusion Radiofrequency ablation is a valuable alternative to open surgery and would free up operating room time in a context of low accessibility. PMID:29582749

Is the inferior vena cava diameter measured by bedside ultrasonography valuable in estimating the intravascular volume in patients with septic shock?

Directory of Open Access Journals (Sweden)

Mortaza Talebi Doluie

2016-07-01

Full Text Available Introduction:Resuscitation should be initiated immediately in shock. Early goal-directed therapy is an established algorithm for the resuscitation in septic shock. The first step is to maintain cardiac preload. Central venous pressure (CVP plays an important role in goal-directed therapy. Central venous catheterization is invasive and time-consuming in emergency conditions. There are some alternative and noninvasive methods for estimating the intravascular volume such as measuring the inferior vena cava (IVC diameter by ultrasonography. Methods: We searched PubMed, Google scholar, and Scopus databases with keywords (central venous pressure OR venous pressure OR CVP AND (ultrasonography OR sonography AND (sepsis OR septic shock AND (inferior vena cava OR IVC.Result: The search resulted in 2550 articles. The articles were appraised regarding the relevance, type of article, and statistical methods. Finally, 12 articles were selected. The number of patients was between 30 and 83 cases (mean age=57-67 years, intubated and non-intubated in each study. The IVC diameter was measured in respiratory cycle by bedside ultrasonography in longitudinal subxiphoid view and caval index was calculated, then they were compared with the CVP measured by central venous catheter.Discussion: CVP is an indicator of intravascular fluid status and right heart function. CVP measurement is an invasive method and of course with some complications. The IVC is the biggest vein of venous system with low-pressure; expansion of the vein reflects intravascular volume.Conclusion: It seems that IVC diameter measured by ultrasonography could be used as an alternative method for the determination of CVP in the emergency or critical patients.

Overview of the JYFLTRAP mass measurements and high-precision ...

Indian Academy of Sciences (India)

nuclei, the mass difference can be determined with much higher precision than would normally be possible since for the mass doublets the systematic uncertainties become ..... The two-neutron separation energies in N = 60 indicate the. 338 ... Masses of zinc isotopes (Z = 30) were measured up to 80Zn, providing valuable.

Professional Regulation: A Potentially Valuable Tool in Responding to “Stem Cell Tourism”

Directory of Open Access Journals (Sweden)

Amy Zarzeczny

2014-09-01

Full Text Available The growing international market for unproven stem cell-based interventions advertised on a direct-to-consumer basis over the internet (“stem cell tourism” is a source of concern because of the risks it presents to patients as well as their supporters, domestic health care systems, and the stem cell research field. Emerging responses such as public and health provider-focused education and national regulatory efforts are encouraging, but the market continues to grow. Physicians play a number of roles in the stem cell tourism market and, in many jurisdictions, are members of a regulated profession. In this article, we consider the use of professional regulation to address physician involvement in stem cell tourism. Although it is not without its limitations, professional regulation is a potentially valuable tool that can be employed in response to problematic types of physician involvement in the stem cell tourism market.

Challenge Measurements For Authentication

International Nuclear Information System (INIS)

Pitts, W. Karl

2009-01-01

Authentication of systems with an information barrier that protects sensitive information is difficult; in particular, the information barrier can allow a hidden switch to be implemented by the system fabricator and operator. The hidden switch is the operator's ability to subvert the measurement system and force it to produce a desired and false result. It is usually discussed in the context of an attribute measurement in which a faked item is presented in place of a real item regulated by an agreement, with the driving motivation being the ability to preserve a stock of valuable items. In simple terms, the hidden switch enables a shell game with assets, and the information barrier protects the switch. This presentation outlines challenge measurements that could be used to detect the implementation of a hidden switch and assist the authentication process.

Scala vestibuli insertion in cochlear implantation: a valuable alternative for cases with obstructed scala tympani.

Science.gov (United States)

Kiefer, J; Weber, A; Pfennigdorff, T; von Ilberg, C

2000-01-01

Insertion of a sufficient number of electrodes is important for a successful use of cochlear implants. We investigated the results of scala vestibuli insertion for cochlear implantation in cases of obstructed scala tympani. In a series of 200 cochlear implantations, scala vestibuli insertion was successfully performed in 4 cases with obstruction of the scala tympani. Etiologies included a temporal bone fracture, severe otosclerosis and malformations of the cochlea. The maximum insertion depth obtained via the scala vestibuli was 30 mm. Postoperative results were comparable to patients in whom conventional scala tympani insertion was performed. No adverse effects related to the site of insertion were observed. Scala vestibuli insertion offers a valuable alternative in cases of obstructed scala tympani that can be employed for a variety of etiologies. Copyright 2000 S. Karger AG, Basel

A GIS-based Spatial Decision Support System for environmentally valuable areas in the context of sustainable development of Poland

Science.gov (United States)

Kubacka, Marta

2013-04-01

The issue of spatial development, and thus proper environmental management and protection at naturally valuable areas is today considered a major hazard to the stability of the World ecological system. The increasing demand for areas with substantial environmental and landscape assets, incorrect spatial development, improper implementation of law as well as low citizen awareness bring about significant risk of irrevocable loss of naturally valuable areas. The elaboration of a Decision Support System in the form of collection of spatial data will facilitate solving complex problems concerning spatial development. The elaboration of a model utilizing a number of IT tools will boost the effectiveness of taking spatial decisions by decision-makers. Proper spatial data management becomes today a key element in management based on knowledge, namely sustainable development. Decision Support Systems are definied as model-based sets of procedures for processing data and judgments to assist a manager in his decision-making. The main purpose of the project was to elaborate the spatial decision support system for the Sieraków Landscape Park. A landscape park in Poland comprises a protected area due to environmental, historic and cultural values as well as landscape assets for the purpose of maintaining and popularizing these values in the conditions of sustainable development. It also defines the forms of protected area management and introduces bans concerning activity at these areas by means of the obligation to prepare and implement environmental protection plans by a director of the complex of landscape parks. As opposed to national parks and reserves, natural landscape parks are not the areas free from economic activity, thus agricultural lands, forest lands and other real properties located within the boundaries of natural landscape parks are subject to economic utilization Research area was subject to the analysis with respect to the implementation of investment

Measuring intellectual capital of national economies

OpenAIRE

Rađenović, Tamara; Krstić, Bojan

2017-01-01

The importance of intellectual capital for creating and sustaining competitive advantage of firms has been well established and confirmed in theory and practice. Intellectual resources proved to be the most valuable resources in the process of value creation for various stakeholders. Starting from 1980s onwards, both researchers and practitioners have focused on finding the best solution for measuring intellectual capital in order to enable efficient management and reporting on intellectual c...

Recovery of valuable products in the raffinate of the uranium and thorium pilot-plant

International Nuclear Information System (INIS)

Jardim, E.A.; Abrao, A.

1988-11-01

IPEN-CNEN/SP has being very active in refining yellowcake to pure ammonium diuranate which is converted to uranium trioxide, uranium dioxide, tetra - and hexafluoride in a sequential way. The technology of the thorium purification and its conversion to nuclear grade products has been a practice since several years as well. For both elements the major to be worked is the raffinate from the solvent extraction colum where and thorium are purified via TBP-varsol in pulsed columns. In this paper the actual processing technology is reviewed with special emphasis on the recovery of valuable products, mainly nitric acid and ammonium nitrate. Distilled nitric acid and the final sulfuric acid as residue are recycle. Ammonium nitrate from the precipitation of uranium diuranate is of good quality, being radioactivity and uranium - free, and recommended to be applied as fertilizer. In conclusion the main effort is to maximize the recycle and reuse of the above mentioned chemicals. (author) [pt

High-temperature ultrasonic measurements applied to directly heated samples

International Nuclear Information System (INIS)

Moore, R.I.; Taylor, R.E.

1984-01-01

High-temperature ultrasonic measurements of Young's modulus were made of graphite samples heated directly. The samples were cylindrical rods of the same geometry as that used in the multiproperty apparatus for simultaneous/consecutive measurements of a number of thermophysical properties to high temperatures. The samples were resonated in simple longitudinal vibration modes. Measurements were performed up to 2000 K. Incorporation of ultrasonic measurements of Young's modulus in the capabilities of the multiproperty apparatus is valuable because (i) ultrasonic measurements can be related to normal destructive measurements of this property; (ii) they can be used for screening materials or acceptance testing of specimens; (iii) they can be used to increase the understanding of thermophysical properties and property correlations. (author)

Measuring single-cell density.

Science.gov (United States)

Grover, William H; Bryan, Andrea K; Diez-Silva, Monica; Suresh, Subra; Higgins, John M; Manalis, Scott R

2011-07-05

We have used a microfluidic mass sensor to measure the density of single living cells. By weighing each cell in two fluids of different densities, our technique measures the single-cell mass, volume, and density of approximately 500 cells per hour with a density precision of 0.001 g mL(-1). We observe that the intrinsic cell-to-cell variation in density is nearly 100-fold smaller than the mass or volume variation. As a result, we can measure changes in cell density indicative of cellular processes that would be otherwise undetectable by mass or volume measurements. Here, we demonstrate this with four examples: identifying Plasmodium falciparum malaria-infected erythrocytes in a culture, distinguishing transfused blood cells from a patient's own blood, identifying irreversibly sickled cells in a sickle cell patient, and identifying leukemia cells in the early stages of responding to a drug treatment. These demonstrations suggest that the ability to measure single-cell density will provide valuable insights into cell state for a wide range of biological processes.

Model of purchase contract of the electric power produced by installations which valorize the domestic wastes or equivalent, at the exception of the installations using biogas, and subjected to the electric power purchase obligation. Established in the application of the article 5 from the decree of the 10 may 2001 and approved by the ministry charged with the electric power; Modele de contrat d'achat de l'energie electrique produite par les installations qui valorisent des dechets menagers ou assimiles, a l'exception des installations utilisant du biogaz, et beneficiant l'obligation d'achat d'electricite. Etablie en application de l'article 5 du decret du 10 mai 2001 et approuve par le Ministre charge de l'electricite

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The text of the contract is provided presenting the general conditions and specific conditions adapted to the installation characteristics of the electric power producer: contract object, connecting to the public network, producer installation, reciprocal agreements, measure and control of the energy and power, tariffs periods, price of the bought energy, taxes, payments, contract management, validity, suspension modification or avoidance of the contract. (A.L.B.)

Model of purchase contract of the electric power produced by installations which eliminate the crude or transformed animal wastes, and subjected to the electric power purchase obligation. Established in the application of the article 5 from the decree of the 10 may 2001 and approved by the ministry charged with the electric power; Modele de contrat d'achat de l'energie electrique produite par les installations qui eliminent des dechets animaux bruts ou transformes, et beneficiant l'obligation d'achat d'electricite. Etablie en application de l'article 5 du decret du 10 mai 2001 et approuve par le Ministre charge de l'electricite

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The text of the contract is provided presenting the general conditions and specific conditions adapted to the installation characteristics of the electric power producer: contract object, connecting to the public network, producer installation, reciprocal agreements, measure and control of the energy and power, tariffs periods, price of the bought energy, taxes, payments, contract management, validity, suspension modification or avoidance of the contract. (A.L.B.)

Model of purchase contract of the electric power produced by installations which use mainly the energy given by the combustion of non fossil matters of vegetable extraction, and subjected to the electric power purchase obligation. Established in the application of the article 5 from the decree of the 10 may 2001 and approved by the ministry charged with the electric power; Modele de contrat d'achat de l'energie electrique produite par les installations utilisant, a titre principal, l'energie degagee par la combustion de matieres non fossiles d'origine vegetale et beneficiant l'obligation d'achat d'electricite. Etablie en application de l'article 5 du decret du 10 mai 2001 et approuve par le Ministre charge de l'electricite

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The text of the contract is provided presenting the general conditions and specific conditions adapted to the installation characteristics of the electric power producer: contract object, connecting to the public network, producer installation, reciprocal agreements, measure and control of the energy and power, tariffs periods, price of the bought energy, taxes, payments, contract management, validity, suspension modification or avoidance of the contract. (A.L.B.)

Model of purchase contract of the electric power produced by installations using the hydraulic energy of lakes, rivers and seas and subjected to the electric power purchase obligation. Established in the application of the article 5 from the decree of the 10 may 2001 and approved by the ministry charged with the electric power; Modele de contrat d'achat de l'energie electrique produite par les installations utilisant l'energie hydraulique des lacs, cours d'eau et mers et beneficiant l'obligation d'achat d'electricite. Etablie en application de l'article 5 du decret du 10 mai 2001 et approuve par le Ministre charge de l'electricite

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The text of the contract is provided presenting the general conditions and specific conditions adapted to the installation characteristics of the electric power producer: contract object, connecting to the public network, producer installation, reciprocal agreements, measure and control of the energy and power, tariffs periods, price of the bought energy, taxes, payments, contract management, validity, suspension modification or avoidance of the contract. (A.L.B.)

Tropospheric Ozone Source Attribution in Southern California during Summer 2014 Based on Lidar Measurements and Model Simulations

Science.gov (United States)

Granados Munoz, Maria Jose; Johnson, Matthew S.; Leblanc, Thierry

2016-01-01

In the past decades, significant efforts have been made to increase tropospheric ozone long-term monitoring. A large number of ground-based, airborne and space-borne instruments are currently providing valuable data to contribute to better understand tropospheric ozone budget and variability. Nonetheless, most of these instruments provide in-situ surface and column-integrated data, whereas vertically resolved measurements are still scarce. Besides ozonesondes and aircraft, lidar measurements have proven to be valuable tropospheric ozone profilers. Using the measurements from the tropospheric ozone differential absorption lidar (DIAL) located at the JPL Table Mountain Facility, California, and the GEOS-Chem and GEOS-5 model outputs, the impact of the North American monsoon on tropospheric ozone during summer 2014 is investigated. The influence of the Monsoon lightning-induced NOx will be evaluated against other sources (e.g. local anthropogenic emissions and the stratosphere) using also complementary data such as backward-trajectories analysis, coincident water vapor lidar measurements, and surface ozone in-situ measurements.

INFORMATION – A VALUABLE ELEMENT IN THE MANAGEMENT SYSTEM OF THE MARKET ECONOMY

Directory of Open Access Journals (Sweden)

Ion SARBU

2015-12-01

Full Text Available News. The globalization process has been accelerated by the explosion of information technologies entering into the work of social, production and education enterprises. Thus, in terms of systemic approach, the company is not a production of goods or services tailored to market requirements, but is equally an information unit producing knowledge. Purpose. The fundamental feature of these processes is applied once that the primary element of information processing is generated always in the information system, the information processed and interpreted in its final form as a resource of the management system. Methods. The article exposed the theoretical and methodological organization of information system of market relations and the role of information as a valuable element of business processes. Results. In the modern knowledge-based economy, increasing information needs at all levels of economic units that generate the emergence of new information products, enhancement of the productive resource and service information and transporting it by modern computerized channels.Information as a productive resource and service as the raw material for creating an active instrument of scientific management and virtual education in Moldova.

Is anorectal endosonography valuable in dyschesia?

Science.gov (United States)

Van Outryve, S M; Van Outryve, M J; De Winter, B Y; Pelckmans, P A

2002-01-01

Aims: Dyschesia can be provoked by inappropriate defecation movements. The aim of this prospective study was to demonstrate dysfunction of the anal sphincter and/or the musculus (m.) puborectalis in patients with dyschesia using anorectal endosonography. Methods: Twenty consecutive patients with a medical history of dyschesia and a control group of 20 healthy subjects underwent linear anorectal endosonography (Toshiba models IUV 5060 and PVL-625 RT). In both groups, the dimensions of the anal sphincter and the m. puborectalis were measured at rest, and during voluntary squeezing and straining. Statistical analysis was performed within and between the two groups. Results: The anal sphincter became paradoxically shorter and/or thicker during straining (versus the resting state) in 85% of patients but in only 35% of control subjects. Changes in sphincter length were statistically significantly different (panismus”. PMID:12377809

Basic principles for measurement of intramuscular pressure

Science.gov (United States)

Hargens, A. R.; Ballard, R. E.

1995-01-01

We review historical and methodological approaches to measurements of intramuscular pressure (IMP) in humans. These techniques provide valuable measures of muscle tone and activity as well as diagnostic criteria for evaluation of exertional compartment syndrome. Although the wick and catheter techniques provide accurate measurements of IMP at rest, their value for exercise studies and diagnosis of exertional compartment syndrome is limited because of low frequency response and hydrostatic (static and inertial) pressure artifacts. Presently, most information on diagnosis of exertional compartment syndromes during dynamic exercise is available using the Myopress catheter. However, future research and clinical diagnosis using IMP can be optimized by the use of a miniature transducer-tipped catheter such as the Millar Mikro-tip.

Accurate micro Hall effect measurements on scribe line pads

DEFF Research Database (Denmark)

Østerberg, Frederik Westergaard; Petersen, Dirch Hjorth; Wang, Fei

2009-01-01

Hall mobility and sheet carrier density are important parameters to monitor in advanced semiconductor production. If micro Hall effect measurements are done on small pads in scribe lines, these parameters may be measured without using valuable test wafers. We report how Hall mobility can...... be extracted from micro four-point measurements performed on a rectangular pad. The dimension of the investigated pad is 400 × 430 ¿m2, and the probe pitches range from 20 ¿m to 50 ¿m. The Monte Carlo method is used to find the optimal way to perform the Hall measurement and extract Hall mobility most...

Interpretation of TLD data measured in the vicinity of nuclear power plants

International Nuclear Information System (INIS)

Czarnecki, J.; Baggenstos, M.; Schuler, J.; Voelkle, H.

1981-01-01

It is shown that incorporating the location-specific characteristics of natural radiation into the interpretation of the surrounding measurements makes some valuable contributions to the improvement of the measuring quality of thermoluminescent enviromental dosimetry. This brings the possibility to determine the net dose of the additional man-made radiations (e.g. caused by the nuclear power plant) with better accuracy. The authors propose a method of analysing the measured results which enables one to include the measured data from the evidence finding phase in the interpretation of the environment monitoring-TLD-measurement (orig./DG) [de

Classification of public lands valuable for geothermal steam and associated geothermal resources

Energy Technology Data Exchange (ETDEWEB)

Goodwin, L.H.; Haigler, L.B.; Rioux, R.L.; White, D.E.; Muffler, L.J.P.; Wayland, R.G.

1973-01-01

The Organic Act of 1879 (43 USC 31) that established the US Geological Survey provided, among other things, for the classification of the public lands and for the examination of the geological structure, mineral resources, and products of the national domain. In order to provide uniform executive action in classifying public lands, standards for determining which lands are valuable for mineral resources, for example, leasable mineral lands, or for other products are prepared by the US Geological Survey. This report presents the classification standards for determining which Federal lands are classifiable as geothermal steam and associated geothermal resources lands under the Geothermal Steam Act of 1970 (84 Stat. 1566). The concept of a geothermal resouces province is established for classification of lands for the purpose of retention in Federal ownership of rights to geothermal resources upon disposal of Federal lands. A geothermal resources province is defined as an area in which higher than normal temperatures are likely to occur with depth and in which there is a resonable possiblity of finding reservoir rocks that will yield steam or heated fluids to wells. The determination of a known geothermal resources area is made after careful evaluation of the available geologic, geochemical, and geophysical data and any evidence derived from nearby discoveries, competitive interests, and other indicia. The initial classification required by the Geothermal Steam Act of 1970 is presented.

Measurement of environmental tritium for isotope hydrology studies

International Nuclear Information System (INIS)

1973-01-01

The Section of Isotope Hydrology of the IAEA Division of Research and Laboratories gains valuable hydrological information from studies of the concentration of environmental tritium in precipitation, surface and groundwater samples from various sites around the world. This photo story shows the steps in the measurement of these very low levels of tritium in water as performed in the Isotope Hydrology Laboratory of the Agency. (author)

Valuable Virality

NARCIS (Netherlands)

Akpinar, E.; Berger, Jonah

2017-01-01

Given recent interest in social media, many brands now create content that they hope consumers will view and share with peers. While some campaigns indeed go “viral,” their value to the brand is limited if they do not boost brand evaluation or increase purchase. Consequently, a key question is how

Valuable Connections

DEFF Research Database (Denmark)

Kjærsgaard, Mette Gislev; Smith, Rachel Charlotte

2014-01-01

and blurred boundaries between physical, digital and hybrid contexts, as well as design, production and use, we might need to rethink the role of ethnography within design and business development. Perhaps the aim is less about ”getting closer” to user needs and real-life contexts, through familiarization......, mediation, advocacy and facilitation, as in conventional approaches to ethnography in user centred design, and more about creating a critical theoretically informed distance from which to perceive and reflect upon complex interconnections between people, technology, business and design, as well as our roles...

Valuable Connections

DEFF Research Database (Denmark)

Kjærsgaard, Mette Gislev; Smith, Rachel Charlotte

2014-01-01

, as well as design, production and use, we might need to rethink the role of ethnography within user centred design and business development. Here the challenge is less about ”getting closer” to user needs and real-life contexts, through familiarization, mediation, and facilitation, and more about creating...... a critical theoretically informed distance from which to perceive and reflect upon complex interconnections between people, technology, business and design, as well as our roles as researchers and designers within these....

Catalytic conversion of CO2 into valuable products

International Nuclear Information System (INIS)

Pham-Huu, C.; Ledoux, M.J.

2008-01-01

inertness the recovery of the active phase is extremely easy, i.e. acidic or basic washing, which reduce the cost investment of the process for the final spent catalyst disposal and the fully re-use of the support. The high thermal conductivity of the SiC support could also allow the reduction of the temperature loss during the reaction taken into account the high endothermicity of the reaction. The aim of the presentation is to report the synthesis and use of SiC-based catalyst for CO 2 reforming which allows the conversion of CO 2 into a more valuable products for further fuel processing via the Fischer-Tropsch synthesis

Why Do Gamers Buy 'Virtual Assets'? An Insight in to the Psychology Behind Purchase Behaviour

OpenAIRE

Griffiths, Jack V, Mark

2015-01-01

The present study investigated the phenomenon of buying ‘virtual assets’ for game avatars. Virtual Assets are items that are bought with real-world money for an avatar in-game; weapons, items, pets, mounts and skin customisations the most popular examples. Using Interpretative phenomenological analysis (IPA) six gamers that regularly bought in-game assets were interviewed. IPA was chosen because of its emphasis on lived experience, and each participant had subjective experiences of gaming...

Why do gamers buy 'virtual assets'? An insight in to the psychology behind purchase behaviour

OpenAIRE

Cleghorn, J; Griffiths, MD

2015-01-01

The present study investigated the phenomenon of buying 'virtual assets' for game avatars. Virtual Assets are items that are bought with real-world money for an avatar in-game. Weapons, items, pets, mounts and skin customisations are the most popular examples. Using a qualitative methodology - in this case Interpretative phenomenological analysis (IPA) - six gamers that regularly bought in - game assets were interviewed. IPA was chosen because of its emphasis on lived experience, and each par...

Application of high-resolution melting analysis for authenticity testing of valuable Dendrobium commercial products.

Science.gov (United States)

Dong, Xiaoman; Jiang, Chao; Yuan, Yuan; Peng, Daiyin; Luo, Yuqin; Zhao, Yuyang; Huang, Luqi

2018-01-01

The accurate identification of botanical origin in commercial products is important to ensure food authenticity and safety for consumers. The Dendrobium species have long been commercialised as functional food supplements and herbal medicines in Asia. Three valuable Dendrobium species, namely Dendrobium officinale, D. huoshanense and D. moniliforme, are often mutually adulterated in trade products in pursuit of higher profit. In this paper, a rapid and reliable semi-quantitative method for identifying the botanical origin of Dendrobium products in terminal markets was developed using high-resolution melting (HRM) analysis with specific primer pairs to target the trnL-F region. The HRM analysis method detected amounts of D. moniliforme adulterants as low as 1% in D. huoshanense or D. officinale products. The results have demonstrated that HRM analysis is a fast and effective tool for the differentiation of these Dendrobium species both for their authenticity as well as for the semi-quantitative determination of the purity of their processed products. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Benchmark referencing of neutron dosimetry measurements

International Nuclear Information System (INIS)

Eisenhauer, C.M.; Grundl, J.A.; Gilliam, D.M.; McGarry, E.D.; Spiegel, V.

1980-01-01

The concept of benchmark referencing involves interpretation of dosimetry measurements in applied neutron fields in terms of similar measurements in benchmark fields whose neutron spectra and intensity are well known. The main advantage of benchmark referencing is that it minimizes or eliminates many types of experimental uncertainties such as those associated with absolute detection efficiencies and cross sections. In this paper we consider the cavity external to the pressure vessel of a power reactor as an example of an applied field. The pressure vessel cavity is an accessible location for exploratory dosimetry measurements aimed at understanding embrittlement of pressure vessel steel. Comparisons with calculated predictions of neutron fluence and spectra in the cavity provide a valuable check of the computational methods used to estimate pressure vessel safety margins for pressure vessel lifetimes

Anastomotic leakage as an outcome measure for quality of colorectal cancer surgery

NARCIS (Netherlands)

Snijders, H. S.; Henneman, D.; van Leersum, N. L.; ten Berge, M.; Fiocco, M.; Karsten, T. M.; Havenga, K.; Wiggers, T.; Dekker, J. W.; Tollenaar, R. A. E. M.; Wouters, M. W. J. M.

Introduction When comparing mortality rates between hospitals to explore hospital performance, there is an important role for adjustment for differences in case-mix. Identifying outcome measures that are less influenced by differences in case-mix may be valuable. The main goal of this study was to

Measurement of oxygen consumption with the Cosmed K2: a comparative study

NARCIS (Netherlands)

Forkink, A.; Frings-Dresen, M. H.

1994-01-01

An instrument that accurately measures oxygen consumption (VO2) during field performance is valuable for investigations of physiological workload. Cosmed (Rome, Italy) has introduced such an instrument, the Cosmed K2. In this study the Cosmed K2 was compared with the Oxyconbeta (Jaeger, Breda, The

Hydroelectric plant turbine, stream and spillway flow measurement

Energy Technology Data Exchange (ETDEWEB)

Lampa, J.; Lemon, D.; Buermans, J. [ASL AQ Flow Inc., Sidney, BC (Canada)

2004-07-01

This presentation provided schematics of the turbine flow measurements and typical bulb installations at the Kootenay Canal and Wells hydroelectric power facilities in British Columbia. A typical arrangement for measuring stream flow using acoustic scintillation was also illustrated. Acoustic scintillation is portable, non-intrusive, suitable for short intakes, requires minimal maintenance and is cost effective and accurate. A comparison between current meters and acoustic scintillation was also presented. Stream flow measurement is valuable in evaluating downstream areas that are environmentally important for fish habitat. Stream flow measurement makes it possible to define circulation. The effects of any changes can be assessed by combining field measurements and numerical modelling. The presentation also demonstrated that computational fluid dynamics modelling appears promising in determining stream flow and turbulent flow at spillways. tabs., figs.

Measurement-theoretic foundations of time discounting in economics

OpenAIRE

Conrad Heilmann

2008-01-01

In economics, the concept of time discounting introduces weights on future goods to make these less valuable. Yet, both the conceptual motivation for time discounting and its specic functional form remain contested. To address these problems, this paper provides a measurement-theoretic framework of representation for time discounting. The representation theorem characterises time discounting factors by representations of time dierences. This general result can be interpreted with existing the...

MRT measurements of the CSF spaces in HIV associated cerebral atrophy

International Nuclear Information System (INIS)

Handwerker, M.; Krahe, T.; Klinker, H.; Schindler, R.

1992-01-01

The CSF volume of 45 patients with HIV infection was measured at various clinical stages and the results compared with 24 normals. 60% of all patients showed increased CSF spaces as an indication of cerebral atrophy. Serial measurements were particularly valuable during the early stages of atrophy since there is marked variation in the normal CSF volume. Conventional measurements, with the exception of the width of the third ventricle, were much less sensitive than these quantitative measurements. Classification of HIF infection according to the clinical stage was useful since CSF volume and volume increase correlated with the stage of HIV infection. (orig.) [de

High dose rate brachytherapy source measurement intercomparison.

Science.gov (United States)

Poder, Joel; Smith, Ryan L; Shelton, Nikki; Whitaker, May; Butler, Duncan; Haworth, Annette

2017-06-01

This work presents a comparison of air kerma rate (AKR) measurements performed by multiple radiotherapy centres for a single HDR 192 Ir source. Two separate groups (consisting of 15 centres) performed AKR measurements at one of two host centres in Australia. Each group travelled to one of the host centres and measured the AKR of a single 192 Ir source using their own equipment and local protocols. Results were compared to the 192 Ir source calibration certificate provided by the manufacturer by means of a ratio of measured to certified AKR. The comparisons showed remarkably consistent results with the maximum deviation in measurement from the decay-corrected source certificate value being 1.1%. The maximum percentage difference between any two measurements was less than 2%. The comparisons demonstrated the consistency of well-chambers used for 192 Ir AKR measurements in Australia, despite the lack of a local calibration service, and served as a valuable focal point for the exchange of ideas and dosimetry methods.

Measurement strategy for spatially encoded photonic qubits

International Nuclear Information System (INIS)

Solis-Prosser, M. A.; Neves, L.

2010-01-01

We propose a measurement strategy which can, probabilistically, reproduce the statistics of any observable for spatially encoded photonic qubits. It comprises the implementation of a two-outcome positive operator-valued measure followed by a detection in a fixed transverse position, making the displacement of the detection system unnecessary, unlike previous methods. This strategy generalizes a scheme recently demonstrated by one of us and co-workers, restricted to measurement of observables with equatorial eigenvectors only. The method presented here can be implemented with the current technology of programmable multipixel liquid-crystal displays. In addition, it can be straightforwardly extended to high-dimensional qudits and may be a valuable tool in optical implementations of quantum information protocols with spatial qubits and qudits.

Parasites as valuable stock markers for fisheries in Australasia, East Asia and the Pacific Islands.

Science.gov (United States)

Lester, R J G; Moore, B R

2015-01-01

Over 30 studies in Australasia, East Asia and the Pacific Islands region have collected and analysed parasite data to determine the ranges of individual fish, many leading to conclusions about stock delineation. Parasites used as biological tags have included both those known to have long residence times in the fish and those thought to be relatively transient. In many cases the parasitological conclusions have been supported by other methods especially analysis of the chemical constituents of otoliths, and to a lesser extent, genetic data. In analysing parasite data, authors have applied multiple different statistical methodologies, including summary statistics, and univariate and multivariate approaches. Recently, a growing number of researchers have found non-parametric methods, such as analysis of similarities and cluster analysis, to be valuable. Future studies into the residence times, life cycles and geographical distributions of parasites together with more robust analytical methods will yield much important information to clarify stock structures in the area.

MALDI TOF imaging mass spectrometry in clinical pathology: a valuable tool for cancer diagnostics (review).

Science.gov (United States)

Kriegsmann, Jörg; Kriegsmann, Mark; Casadonte, Rita

2015-03-01

Matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) imaging mass spectrometry (IMS) is an evolving technique in cancer diagnostics and combines the advantages of mass spectrometry (proteomics), detection of numerous molecules, and spatial resolution in histological tissue sections and cytological preparations. This method allows the detection of proteins, peptides, lipids, carbohydrates or glycoconjugates and small molecules.Formalin-fixed paraffin-embedded tissue can also be investigated by IMS, thus, this method seems to be an ideal tool for cancer diagnostics and biomarker discovery. It may add information to the identification of tumor margins and tumor heterogeneity. The technique allows tumor typing, especially identification of the tumor of origin in metastatic tissue, as well as grading and may provide prognostic information. IMS is a valuable method for the identification of biomarkers and can complement histology, immunohistology and molecular pathology in various fields of histopathological diagnostics, especially with regard to identification and grading of tumors.

Plasma turbulence measured by fast sweep reflectometry on Tore Supra

International Nuclear Information System (INIS)

Clairet, F.; Vermare, L.; Leclert, G.

2004-01-01

Traditionally devoted to electron density profile measurement we show that fast frequency sweeping reflectometry technique can bring valuable and innovative measurements onto plasma turbulence. While fast frequency sweeping technique is traditionally devoted to electron density radial profile measurements we show in this paper how we can handle the fluctuations of the reflected signal to recover plasma density fluctuation measurements with a high spatial and temporal resolution. Large size turbulence related to magneto-hydrodynamic (MHD) activity and the associated magnetic islands can be detected. The radial profile of the micro-turbulence, which is responsible for plasma anomalous transport processes, is experimentally determined through the fluctuation of the reflected phase signal. (authors)

Plasma turbulence measured by fast sweep reflectometry on Tore Supra

International Nuclear Information System (INIS)

Clairet, F.; Vermare, L.; Heuraux, S.; Leclert, G.

2004-01-01

Traditionally devoted to electron density profile measurement we show that fast frequency sweeping reflectometry technique can bring valuable and innovative measurements onto plasma turbulence. While fast frequency sweeping technique is traditionally devoted to electron density radial profile measurements we show in this paper how we can handle the fluctuations of the reflected signal to recover plasma density fluctuation measurements with a high spatial and temporal resolution. Large size turbulence related to magneto-hydrodynamic (MHD) activity and the associated magnetic islands can be detected. The radial profile of the micro-turbulence, which is responsible for plasma anomalous transport processes, is experimentally determined through the fluctuation of the reflected phase signal

Seasonal changes in chemical and mineralogical composition of sewage sludge incineration residues and their potential for metallic elements and valuable components recovery

Science.gov (United States)

Kasina, Monika; Kowalski, Piotr R.; Michalik, Marek

2017-04-01

collected in the spring 2016. The highest concentrations for most of the elements were measured in summer 2016 except for the Ca, Sn, Zn, Cd, Sb, and Ag which concentrations were the highest in the winter time 2015. Even though the seasonal changes in metallic and/or potentially valuable elements concentrations are visible their overall content is low. In addition they are dispersed within crystalline and amorphous phase, therefore it seems to be inappropriate to consider this material as a source of valuable elements. Due to high phosphorus content in the fly ash, equal to the low grade phosphorus ore, both in the form of phosphate minerals as well as dispersed within minerals can be treated as a potential source of this critical raw material. Acknowledgment: The study was supported by Polish National Science Centre. NCN grant No UMO-2014/15/B/ST10/04171

Purchasing power parity and interest parity in the laboratory

OpenAIRE

Fisher, Eric O'N.

2001-01-01

This paper analyzes purchasing power parity and uncovered interest parity in the laboratory. It finds strong evidence that purchasing power parity, covered interest parity, and uncovered interest parity hold. Subjects are endowed with an intrinsically useless (green) currency that can be used to purchase another useless (red) currency. Green goods can be bought only with green currency, and red goods can be bought only with red currency. The foreign exchange markets are organized as call mark...

Accurate mass measurements on neutron-deficient krypton isotopes

CERN Document Server

Rodríguez, D.; Äystö, J.; Beck, D.; Blaum, K.; Bollen, G.; Herfurth, F.; Jokinen, A.; Kellerbauer, A.; Kluge, H.-J.; Kolhinen, V.S.; Oinonen, M.; Sauvan, E.; Schwarz, S.

2006-01-01

The masses of $^{72–78,80,82,86}$Kr were measured directly with the ISOLTRAP Penning trap mass spectrometer at ISOLDE/CERN. For all these nuclides, the measurements yielded mass uncertainties below 10 keV. The ISOLTRAP mass values for $^{72–75}$Kr being more precise than the previous results obtained by means of other techniques, and thus completely determine the new values in the Atomic-Mass Evaluation. Besides the interest of these masses for nuclear astrophysics, nuclear structure studies, and Standard Model tests, these results constitute a valuable and accurate input to improve mass models. In this paper, we present the mass measurements and discuss the mass evaluation for these Kr isotopes.

Measurement of mortar permittivity during setting using a coplanar waveguide

International Nuclear Information System (INIS)

Juan-García, P; Torrents, J M

2010-01-01

A sensor based on a coplanar waveguide structure was designed to perform non-destructive tests for material characterization in which the measurement can be done only on one side of the sample. The measurements were compared with the impedance of a capacitor filled with the same material. The permittivity and insertion loss of the sensor showed valuable information about the setting process of a mortar slab during the first 28 days of the hardening process, and a good correlation between both measurements was obtained, so the proposed setup can be useful for structural surveillance and moisture detection in civil structures

Cursor Movement – a Valuable Indicator in Intelligent System Design

Directory of Open Access Journals (Sweden)

Versavia Ancusa

2017-07-01

Full Text Available Systems that react to emotional information allow for better satisfaction of the user’s needs, stated or otherwise. Special support should be built-in, in order to read and measure the timevariable user’s affective state. This paper presents how cursor movement can accurately measure two basic emotional states and introduces a way to measure the emotional flow graph of an application, which allows for better user design.

Health Care Quality: Measuring Obesity in Performance Frameworks.

Science.gov (United States)

Zvenyach, Tracy; Pickering, Matthew K

2017-08-01

Obesity affects over one-third of Americans and leads to several chronic and costly comorbid conditions. The national movement toward value-based care calls for a refocusing of efforts to address the US obesity epidemic. To help set the stage, the current landscape of obesity-specific quality measures was evaluated. Seven quality measure databases and nine professional societies were searched. Inclusion and exclusion criteria were applied. Measures were then classified by domain and by implementation in national public programs. Eleven obesity-specific quality measures in adults were identified (nine process and two outcome). Three measures received National Quality Forum (NQF) endorsement. Two measures were actively used within Centers for Medicare and Medicaid Services (CMS) programs. Only one measure was both NQF-endorsed and used by CMS. Limitations exist with respect to obesity-specific quality metrics. Such gaps provide opportunities for obesity care specialists to engage and offer valuable insights and pragmatic approaches toward quality measurement. © 2017 The Obesity Society.

Creating and Sustaining customer value for UK luxury brands

OpenAIRE

Chhuon, Celine

2007-01-01

The global market for luxury goods has witnessed a dramatic growth over the last 20 years. Traditionally bought by the Western elite they are now increasingly bought by middle- and lower-income earners as well as being sought by those in emerging Asian markets. For luxury brand owners there is a paradox inherent in the marketing of luxury goods, which reflects managers conflicting goals of striving to obtain high volume sales while maintaining exclusivity for their brands in the face of count...

Is Local Radiotherapy Still Valuable for Patients With Multiple Intrahepatic Hepatocellular Carcinomas?

International Nuclear Information System (INIS)

Koom, Woong Sub; Seong, Jinsil; Han, Kwang Hyub; Lee, Do Yun; Lee, Jong Tae

2010-01-01

Purpose: To investigate whether local radiotherapy (RT) is valuable for patients with multiple hepatocellular carcinomas (HCCs). Methods and Materials: From July 1992 to August 2006, 107 patients with unresectable HCC were treated with local RT after incomplete transcatheter arterial chemoembolization (TACE). The RT field included a main tumor with or without other tumor nodules, depending on the effectiveness of TACE. The median RT dose was 50.4Gy in conventional fractionation. Patients were categorized into four groups: Group 1, single tumor (39 patients); Group 2, multiple tumors within the RT field (25 patients); Group 3, controlled tumors out of the RT field (19 patients); and Group 4, tumors that remained viable out of the RT field (24 patients). Results: Group 1 showed the best survival rate (MST, 35 months; 2-year OS, 60%) and Group 4 the worst (MST, 5 months; 2-year OS, 16%). Group 2 and Group 3 showed similar survival (MST, 13 vs. 19 months; 2-year OS, 35% vs. 46%; p = 0.698). Significantly worse intrahepatic control in Group 4 was observed. The survival in Groups 2 and 3 (MST, 16 months) was significantly different from that in Group 4 (p = 0.004), and was marginally significant compared with that in Group 1 (p = 0.051). Conclusions: Local RT to the main tumor could be applicable in well-controlled intrahepatic tumors out of the RT field. Patients with viable intrahepatic tumors out of the RT field showed worse survival. In future clinical trials, these patients need to be excluded.

Neuro-critical care: a valuable placement during foundation and early neurosurgical training.

Science.gov (United States)

Dyson, Edward W; Kolias, Angelos G; Burnstein, Rowan M; Hutchinson, Peter J A; Garnett, Matthew R; Menon, David K; Trivedi, Rikin A

2014-10-01

Neurosciences critical care units (NCCUs) present a unique opportunity to junior trainees in neurosurgery as well as foundation trainees looking to gain experience in the management of critically ill patients with neurological conditions. Placements in NCCUs are undertaken in the early years of neurosurgical training or during neurosciences themed foundation programmes. We sought to quantify the educational benefits of such placements from the trainee perspective. Thirty-two trainees who had undertaken placements at Foundation Year 2 (FY2) to Specialty Trainee Year 3 (ST3) level between August 2009 and April 2013 were invited to take part in an online questionnaire survey. Competence in individual skills was self-rated on a ranked scale from one (never observed) to five (performed unsupervised) both before and after the placement. Trainees were also asked a series of questions pertaining to their ability to manage common neurosurgical conditions, as well as the perceived educational rigour of their placement. Twenty-three responses were received. Eighteen responses were from FY2s and seven were from ST1-3 level trainees. Following their placements, 100% of respondents felt better equipped to deal with neurosurgical and neurological emergencies and cranial trauma. Most felt better equipped to manage hydrocephalus (95.7%), polytrauma patients (95.7%), spontaneous intracranial haemorrhage (91.3%) and spinal trauma (82.6%). Significant increases were seen in experience in all practical skills assessed. These included central venous catheterisation (p training programme as well as in the Foundation Programme. This supports the incorporation of a four- to six-month NCCU rotation in early years training as educationally valuable.

Recovery of valuable metals from electroplating sludge with reducing additives via vitrification.

Science.gov (United States)

Huang, Ruth; Huang, Kuo-Lin; Lin, Zih-Yi; Wang, Jian-Wen; Lin, Chitsan; Kuo, Yi-Ming

2013-11-15

In this study, vitrification was applied to treat Ni-Cu electroplating sludge. The sludge was mixed with additives (limestone:cullet = 4:6) and then heated to 1450 °C. The cooled product could be separated into slag and ingot. An atomic absorption spectrometer was used to determine the metal levels of specimens and toxicity characteristic leaching procedure (TCLP) tests, whereas the crystalline and surface characteristics were examined using quantitative X-ray diffraction (XRD) analysis and scanning electron microscopy, respectively. With a glassy structure, the slag was mainly composed of Ca, Si, and Mg. The TCLP results of slags met the Taiwan regulated standards, suggesting that slag can be used for recycling purposes. With the aid of additives, the crystalline phase of slag was transformed form CaMgSiO4 into CsSiO3. The ingots were mainly composed of Ni (563,000-693,800 mg/kg), Cu (79,900-87,400 mg/kg), and Fe (35,000-43,600 mg/kg) (target metals) due the gravity separation during vitrification. At appropriate additives/sludge ratios (>0.2), >95% of target metals gathered in the ingot as a recoverable form (Ni-Fe alloy). The high Ni level of slag suggests that the ingot can be used as the raw materials for smelters or the additives for steel making. Therefore, the vitrification approach of this study is a promising technology to recover valuable metals from Ni-Cu electroplating sludge. Copyright © 2013 Elsevier Ltd. All rights reserved.

Recovery of valuable metals from waste cathode materials of spent lithium-ion batteries using mild phosphoric acid

Energy Technology Data Exchange (ETDEWEB)

Chen, Xiangping, E-mail: chenxiangping101@163.com [School of Environmental Science and Engineering, Shaanxi University of Science & Technology, Xi’an 710021 (China); College of Chemistry and Chemical Engineering, Central South University, Changsha 410083 (China); Ma, Hongrui, E-mail: mahr@sust.edu.cn [School of Environmental Science and Engineering, Shaanxi University of Science & Technology, Xi’an 710021 (China); Luo, Chuanbao; Zhou, Tao [College of Chemistry and Chemical Engineering, Central South University, Changsha 410083 (China)

2017-03-15

Graphical abstract: Cobalt can be directly recovered as Co{sub 3}(PO{sub 4}){sub 2} from waste LiCoO{sub 2} using H{sub 3}PO{sub 4} as leaching and precipitating agent. - Highlights: • Phosphoric acid was innovatively used as leaching and precipitating agent. • Over 99% Co and Li can be separated and recovered in a single leaching step. • Co and Li can be separated under mild conditions of 40 °C and 0.7 M H{sub 3}PO{sub 4}. • Activation energy values for Co and Li are 7.3 and 10.168 kJ/mol. • Cobalt phosphate (97.1% in purity) can be obtained as the leaching product. - Abstract: Sustainable recycling of valuable metals from spent lithium-ion batteries (LIBs) may be necessary to alleviate the depletion of strategic metal resources and potential risk of environmental pollution. Herein a hydrometallurgical process was proposed to explore the possibility for the recovery of valuable metals from the cathode materials (LiCoO{sub 2}) of spent LIBs using phosphoric acid as both leaching and precipitating agent under mild leaching conditions. According to the leaching results, over 99% Co can be separated and recovered as Co{sub 3}(PO{sub 4}){sub 2} in a short-cut process involved merely with leaching and filtrating, under the optimized leaching conditions of 40 °C (T), 60 min (t), 4 vol.% H{sub 2}O{sub 2}, 20 mL g{sup −1} (L/S) and 0.7 mol/L H{sub 3}PO{sub 4}. Then leaching kinetics was investigated based on the logarithmic rate kinetics model and the obtained results indicate that the leaching of Co and Li fits well with this model and the activation energies (Ea) for Co and Li are 7.3 and 10.2 kJ/mol, respectively. Finally, it can be discovered from characterization results that the obtained product is 97.1% pure cobalt phosphate (Co{sub 3}(PO{sub 4}){sub 2}).

Twelve years of fireworks market surveillance in France

OpenAIRE

Branka , Ruddy

2012-01-01

International audience; In the view of market surveillance, more than 4400 fireworks have been taken on the spot by sworn people or bought on the market in France since 1999 for inspection purposes. This paper presents the market surveillance sampling evolution during twelve years, carried out by the PYRO unit of the Accidental Risks Division of INERIS as testing body ; the related measures implemented : additional audits in importer plants, interlaboratory tests for guarantying the reliabili...

Assessment on the methods of measuring the tyre-road contact patch stresses

Science.gov (United States)

Anghelache, G.; Moisescu, A.-R.; Buretea, D.

2017-08-01

The paper reviews established and modern methods for investigating tri-axial stress distributions in the tyre-road contact patch. The authors used three methods of measuring stress distributions: strain gauge method; force sensing technique; acceleration measurements. Four prototypes of instrumented pins transducers involving mentioned measuring methods were developed. Data acquisitions of the contact patch stresses distributions were performed using each transducer with instrumented pin. The results are analysed and compared, underlining the advantages and drawbacks of each method. The experimental results indicate that the three methods are valuable.

Is staged external fixation a valuable strategy for war injuries to the limbs?

Science.gov (United States)

Lerner, Alexander; Fodor, Lucian; Soudry, Michael

2006-07-01

High-energy weapons or blast injuries usually result in substantial tissue damage and are serious medical and public health problems. We report our experience with staged external fixation for war injuries to the extremities. Forty-seven patients with 64 high-energy limb fractures caused by war weapons were retrospectively reviewed. The fractures were associated with severe soft tissue damage. There were 14 Gustilo-Anderson Type IIIA fractures, 40 Type IIIB fractures, and 10 Type IIIC fractures. Soft tissue débridement followed by axial realignment of the fractured bones with immediate skeletal stabilization using the AO/ASIF unilateral tubular external fixator was performed on the day of admission. The primary tubular fixators were exchanged 5 to 7 days later for Ilizarov frames. Delayed primary closure, skin grafts, or flaps were used for soft tissue coverage. The mean followup was 40 months, and the Ilizarov/hybrid external fixator was the definitive treatment in all patients. Bone union was achieved at an average of 8 months in 58 (90.6%) fractures. Three patients had nonunions and one patient required an amputation. Two patients were lost to followup. Staged external fixation is a valuable strategy for treatment of war injuries to the extremities. Therapeutic study, Level IV. See the Guidelines for Authors for a complete description of levels of evidence.

Lord Kelvin's atmospheric electricity measurements

Science.gov (United States)

Aplin, Karen; Harrison, R. Giles; Trainer, Matthew; Hough, James

2013-04-01

Lord Kelvin (William Thomson), one of the greatest Victorian scientists, made a substantial but little-recognised contribution to geophysics through his work on atmospheric electricity. He developed sensitive instrumentation for measuring the atmospheric electric field, including invention of a portable electrometer, which made mobile measurements possible for the first time. Kelvin's measurements of the atmospheric electric field in 1859, made during development of the portable electrometer, can be used to deduce the substantial levels of particulate pollution blown over the Scottish island of Arran from the industrial mainland. Kelvin was also testing the electrometer during the largest solar flare ever recorded, the "Carrington event" in the late summer of 1859. Subsequently, Lord Kelvin also developed a water dropper sensor, and employed photographic techniques for "incessant recording" of the atmospheric electric field, which led to the long series of measurements recorded at UK observatories for the remainder of the 19th and much of the 20th century. These data sets have been valuable in both studies of historical pollution and cosmic ray effects on atmospheric processes.

Catalytic pyrolysis of LDPE leads to valuable resource recovery and reduction of waste problems

Energy Technology Data Exchange (ETDEWEB)

Shah, Jasmin [Institute of Chemical Sciences, University of Peshawar, N.W.F.P. (Pakistan); Jan, M. Rasul [University of Malakand, Chakdara, N.W.F.P. (Pakistan); Mabood, Fazal [Department of Chemistry, University of Malakand, Chakdara, N.W.F.P. (Pakistan); Jabeen, Farah [Department of Chemistry, Sarhad University, N.W.F.P. (Pakistan)

2010-12-15

Recycling of waste polymers has become a necessity because huge piles of those polymers represent a threat to the environment. Used polymers are also a source of energy and valuable chemicals. Used low density polyethylenes (LDPE) were catalytically pyrolysed in a home assembled batch reactor under atmospheric pressure. For maximum conversion into chemicals which could be used for feedstock recovery optimum conditions like temperature, catalyst weight and reaction time were optimized. A wide range of acidic and basic catalysts like silica, calcium carbide, alumina, magnesium oxide, zinc oxide and homogeneous mixture of silica and alumina were tried for this purpose. Though CaC{sub 2} was better on the basis of reaction time, however the efficiency of conversion into liquid for SiO{sub 2} was found to be maximum at optimum conditions. These two catalysts could be picked up as suitable catalysts for catalytic pyrolysis of polyethylene. The results of the column separation using different solvents indicate that the oxide containing catalyst could be best suited for selective conversion into polar and aromatic products while CaC{sub 2} catalyst could be adopted for selective conversion into aliphatic products. The liquid product obtained from catalytic pyrolysis was also characterized by physical and chemical tests. Among the physical tests density, specific gravity, API gravity, viscosity, kinematic viscosity, aniline point, flash point, Watson characterization constant, freezing point, diesel index, refractive index, gross calorific value, Net calorific value and ASTM Distillation were determined according to IP and ASTM standard methods for fuel values. From the physical tests it was observed that the results for the liquid fractions are comparable with the standard results of physical tests for gasoline, kerosene and diesel fuel oil. From the Bromine water and KMnO{sub 4} tests it was observed that liquid obtained is a mixture of olefin and aromatic hydrocarbons

Measurements of traveling transition zone along a superconductor

International Nuclear Information System (INIS)

Lottin, J.C.; Miller, J.R.; Lue, J.W.; Dresner, L.

1978-01-01

The spatial variation of the temperature in a traveling superconducting-normal transition zone can provide valuable information on transient heat transfer in realistic coil conditions. In this paper, temperature wave curves are presented for several transport currents corresponding to propagation and recovery in a high magnetic field. The temperature profiles have been constructed in the form T = T (x + vt) by measuring the wave velocity and the temperature at one point as a function of time. The temperature is measured directly with differential thermocouples; simultaneous voltage measurements provide a continuous temperature reference in the current sharing region. Information is given about thermocouple calibration in the high magnetic field and about the temperature and magnetic field dependence of the thermal conductivity of the sample

Measurements of transuranic elements in the Mediterranean

International Nuclear Information System (INIS)

Ballestra, S.; Holm, E.; Fukai, R.

1976-01-01

In order to supplement the baseline data on the distribution of transuranic elements in the Mediterranean, which have already been reported, further measurements were carried out on sea water samples collected during 1974-75 cruises. In 1974 profile collections were conducted at a station approximately 50 km south of Monaco in addition to surface sampling at a few stations, while surface waters were taken from several stations covering wider regions of the western Mediterranean during the 1975 cruises. The measurement of 238 Pu as well as 241 Am were for the first time successful on the 1975 samples. These data are considered valuable as the basis for understanding transuranic biogeochemistry in the Mediterranean environment

Turbidimetry: Measurement of X- or γ-Absorption or Measurement of Natural Radioactivity?

International Nuclear Information System (INIS)

Courtois, G.; Anguenot, F.; Magloire, C.

1970-01-01

Turbidity may be measured by radioactive means on the basis of the two following methods: (a) measurement of X- or γ-absorption in a nuclear gauge, corresponding to a measurement of the density of the medium; (b) in-situ measurement of the natural radioactivity of the sediment in suspension. The authors used the two methods simultaneously: by constructing a prototype γ-absorption measuring gauge ( 241 Am) whose characteristics are described and by seeking to determine the true precision of such an apparatus (limit of precision approximately 1.5 g/1 ± 500 mg); carrying out in-situ measurements of natural radioactivity of sediment in suspension, in particular in estuaries (limit for the Loire approximately 0.7 g/l ± 250 mg). The advantages and disadvantages of each of these two methods are critically analysed. It would appear, in particular: that the natural radioactivity gauge is much less sensitive to local salinity and is a valuable tool in estuaries, of which there are many in Europe, of variable salinity and of generally high turbidity; that being robuster and simpler, it is less sensitive to different parameters (electronic drifts, geometric variations, etc. ). On the other hand, it must be calibrated for each site and periodically on the same site. Further, it can only be used in a clayey medium. Particulars are given for the use of each of these instruments. (author) [fr

Turbidimetry: Measurement of X- or γ-absorption or measurement of natural radioactivity?

International Nuclear Information System (INIS)

Courtois, G.; Anguenot, F.; Magloire, C.

1970-01-01

Turbidity may be measured by radioactive means on the basis of the two following methods: (a) measurement of X- or γ-absorption in a nuclear gauge, corresponding to a measurement of the density of the medium; (b) in-situ measurement of the natural radioactivity of the sediment in suspension. The authors used the two methods simultaneously: by constructing a prototype γ-absorption measuring gauge ( 241 Am) whose characteristics are described and by seeking to determine the true precision of such an apparatus (limit of precision approximately 1. 5 g/l ± 500 mg); carrying out in-situ measurements of natural radioactivity of sediment in suspension, in particular in estuaries (limit for the Loire approximately 0.7 g/l ± 250 mg). The advantages and disadvantages of each of these two methods are critically analysed. It would appear, in particular: that the natural radioactivity gauge is much less sensitive to local salinity and is a valuable tool in estuaries, of which there are many in Europe, of variable salinity and of generally high turbidity; that being robuster and simpler, it is less sensitive to different parameters (electronic drifts, geometric variations, etc.). On the other hand, it must be calibrated for each site and periodically on the same site. Further, it can only be used in a clayey medium. Particulars are given for the use of each of these instruments. (author) [fr

PHYTODIVERSITY AND PECULIARITIES OF RADIOACTIVE CONTAMINATION OF HERBALS AND OTHER ECONOMICALLY VALUABLE PLANT TYPES OF CHECHERSK DISTRICT OF GOMEL REGION BORDERING BRYANSK REGION OF RUSSIA

Directory of Open Access Journals (Sweden)

L. M. Sapegin

2012-01-01

Full Text Available 255 plant (herbals and economically valuable plants and 24 soil samples were taken from 4 investigated sites of Chechersk district for radiological analysis. The plants are presented by 33 species of 31 genera and 26 families. The rest 23 families included 1 species (3,0% each. There were 6 (18,2% tree species, 5 (15,1% shrubs and 1 (3,0% species of sub shrubs, 21 (63,6% species of grasses. Exceeding of 137Cs permissible concentration was found out for 21 (48,8% of 51 taken plant samples. Strontium accumulation changed from 343 Bk/kg to 14 Bk/kg. The research has shown that most part of radionuclides remain in the surface soil layers, which constitutes certain danger. Moreover 90Sr migration in soil takes place much quicker than 137Cs. All these facts show that the use of herbals and other economically valuable plants from the studied sites is possible only under compulsory radiological control.

Insect symbionts as valuable grist for the biotechnological mill: an alkaliphilic silkworm gut bacterium for efficient lactic acid production.

Science.gov (United States)

Liang, Xili; Sun, Chao; Chen, Bosheng; Du, Kaiqian; Yu, Ting; Luang-In, Vijitra; Lu, Xingmeng; Shao, Yongqi

2018-04-07

Insects constitute the most abundant and diverse animal class and act as hosts to an extraordinary variety of symbiotic microorganisms. These microbes living inside the insects play critical roles in host biology and are also valuable bioresources. Enterococcus mundtii EMB156, isolated from the larval gut (gut pH >10) of the model organism Bombyx mori (Lepidoptera: Bombycidae), efficiently produces lactic acid, an important metabolite for industrial production of bioplastic materials. E. mundtii EMB156 grows well under alkaline conditions and stably converts various carbon sources into lactic acid, offering advantages in downstream fermentative processes. High-yield lactic acid production can be achieved by the strain EMB156 from renewable biomass substrates under alkaline pretreatments. Single-molecule real-time (SMRT) sequencing technology revealed its 3.01 Mbp whole genome sequence. A total of 2956 protein-coding sequences, 65 tRNA genes, and 6 rRNA operons were predicted in the EMB156 chromosome. Remarkable genomic features responsible for lactic acid fermentation included key enzymes involved in the pentose phosphate (PP)/glycolytic pathway, and an alpha amylase and xylose isomerase were characterized in EMB156. This genomic information coincides with the phenotype of E. mundtii EMB156, reflecting its metabolic flexibility in efficient lactate fermentation, and established a foundation for future biotechnological application. Interestingly, enzyme activities of amylase were quite stable in high-pH broths, indicating a possible mechanism for strong EMB156 growth in an alkaline environment, thereby facilitating lactic acid production. Together, these findings implied that valuable lactic acid-producing bacteria can be discovered efficiently by screening under the extremely alkaline conditions, as exemplified by gut microbial symbionts of Lepidoptera insects.

Measuring Success in Your Fuels Program: From the Report Card to Valuable Learning

Science.gov (United States)

Paula Nasiatka; David Christenson

2006-01-01

How can a unit learn in everyday fuels programs and from program reviews? How can a unit move from living in the “report card” culture to discovering more effective ways to improve what it knows and how it learns? Six specific tasks are critical to organizational learning according to David A. Garvin of Harvard Business School. By engaging in these tasks a unit can...

A critical review of financial measures as reported in the Ontario hospital balanced scorecard.

Science.gov (United States)

Parkinson, John; Tsasis, Peter; Porporato, Marcela

2007-01-01

For Ontario hospitals in Canada, the Financial Performance and Condition measures in the Ontario hospital balanced scorecard are especially of interest since in the foreseeable future, they may be linked to provincial government funding decisions. However, we find that these measures lack valuable information on key attributes that affect organizational performance. We suggest changes that focus on key drivers of performance and reflect the operational realities of Ontario hospitals.

GMO quantification: valuable experience and insights for the future.

Science.gov (United States)

Milavec, Mojca; Dobnik, David; Yang, Litao; Zhang, Dabing; Gruden, Kristina; Zel, Jana

2014-10-01

Cultivation and marketing of genetically modified organisms (GMOs) have been unevenly adopted worldwide. To facilitate international trade and to provide information to consumers, labelling requirements have been set up in many countries. Quantitative real-time polymerase chain reaction (qPCR) is currently the method of choice for detection, identification and quantification of GMOs. This has been critically assessed and the requirements for the method performance have been set. Nevertheless, there are challenges that should still be highlighted, such as measuring the quantity and quality of DNA, and determining the qPCR efficiency, possible sequence mismatches, characteristics of taxon-specific genes and appropriate units of measurement, as these remain potential sources of measurement uncertainty. To overcome these problems and to cope with the continuous increase in the number and variety of GMOs, new approaches are needed. Statistical strategies of quantification have already been proposed and expanded with the development of digital PCR. The first attempts have been made to use new generation sequencing also for quantitative purposes, although accurate quantification of the contents of GMOs using this technology is still a challenge for the future, and especially for mixed samples. New approaches are needed also for the quantification of stacks, and for potential quantification of organisms produced by new plant breeding techniques.

Resultados da implantação de um algoritmo para terapia nutricional enteral em crianças e adolescentes com câncer Outcomes of the implementation of an enteral nutrition algorithm in children and adolescents with cancer

Directory of Open Access Journals (Sweden)

Adriana Garófolo

2010-10-01

industrializada reduziu o deficit nutricional, principalmente em desnutridos leves. Os resultados sugerem que a suplemento industrializado por sonda favoreceu a recuperação nutricional, principalmente com o uso mais prolongado.Objective This study aimed to describe the algorithm and the global results after its implementation. Methods This was a randomized clinical trial done with malnourished cancer patients. Follow-up followed an algorithm and patients with mild malnutrition were randomized to receive store-bought or homemade oral supplementation. The patients were reassessed after three, eight and twelve weeks. Depending on how the group supplemented with store-bought supplements responded, the supplementation was either continued orally, by tube-feeding or discontinued. The group receiving homemade supplementation either continued on it if the response was positive or received store-bought oral supplementation if the response was negative. The severely malnourished patients either received store-bought supplementation by feeding tube or orally, or it was discontinued if an adequate nutritional status was reached. The patients' responses to supplementation were determined by weight-for-height Z-scores, body mass indices, triceps skinfold thicknesses and circumferences. Results One hundred and seventeen out of 141 patients completed the first three weeks; 58 were severely malnourished and 59 were mildly malnourished. The nutritional status of 41% of the severely malnourished patients and 97% of the mildly malnourished patients receiving store-bought supplement orally improved. The nutritional status of 77% of the mildly malnourished patients receiving homemade supplement orally also improved. Of the 117 patients, 42 had to be tube-fed; of these, 23 accepted and 19 refused tube feeding and continued taking store-bought supplement orally. Consumption of store-bought supplement was higher in tube-fed patients than in orally-fed patients. Consumption also increased as orally

Leaching capacity of metals-metalloids and recovery of valuable materials from waste LCDs.

Science.gov (United States)

Savvilotidou, Vasiliki; Hahladakis, John N; Gidarakos, Evangelos

2015-11-01

The purpose of Directive 2012/19/EU which is related to WEEE (Waste Electrical and Electronic Equipment), also known as "e-waste", is to contribute to their sustainable production and consumption that would most possibly be achieved by their recovery, recycling and reuse. Under this perspective, the present study focused on the recovery of valuable materials, metals and metalloids from LCDs (Liquid Crystal Displays). Indium (In), arsenic (As) and stibium (Sb) were selected to be examined for their Leaching Capacity (R) from waste LCDs. Indium was selected mainly due to its rarity and preciousness, As due to its high toxicity and wide use in LCDs and Sb due to its recent application as arsenic's replacement to improve the optimal clarity of a LCD screen. The experimental procedure included disassembly of screens along with removal and recovery of polarizers via thermal shock, cutting, pulverization and digestion of the shredded material and finally leaching evaluation of the aforementioned elements. Leaching tests were conducted under various temperatures, using various solid:liquid (S/L) ratios and solvents (acid mixtures), to determine the optimal conditions for obtaining the maximum leaching capacities. The examined elements exhibited different leaching behaviors, mainly due to the considerable diversity in their inherent characteristic properties. Indium demonstrated the highest recovery percentages (approximately 60%), while the recovery of As and Sb was unsuccessful, obtaining poor leaching percentages (0.16% and 0.5%, respectively). Copyright © 2015 Elsevier Ltd. All rights reserved.

[A novel biologic electricity signal measurement based on neuron chip].

Science.gov (United States)

Lei, Yinsheng; Wang, Mingshi; Sun, Tongjing; Zhu, Qiang; Qin, Ran

2006-06-01

Neuron chip is a multiprocessor with three pipeline CPU; its communication protocol and control processor are integrated in effect to carry out the function of communication, control, attemper, I/O, etc. A novel biologic electronic signal measurement network system is composed of intelligent measurement nodes with neuron chip at the core. In this study, the electronic signals such as ECG, EEG, EMG and BOS can be synthetically measured by those intelligent nodes, and some valuable diagnostic messages are found. Wavelet transform is employed in this system to analyze various biologic electronic signals due to its strong time-frequency ability of decomposing signal local character. Better effect is gained. This paper introduces the hardware structure of network and intelligent measurement node, the measurement theory and the signal figure of data acquisition and processing.

Deformation Measurement Of Lumbar Vertebra By Holographic Interferometry

Science.gov (United States)

Matsumoto, Toshiro; Kojima, Arata; Ogawa, Ryoukei; Iwata, Koichi; Nagata, Ryo

1988-01-01

The mechanical properties of normal lumbar vertebra and one with the interarticular part cut off to simulate hemi-spondylolysis were measured by the double exposure holographic interferometry. In the normal lumbar vertebra, displacement due to the load applied to the inferior articular process was greater than that of superior articular process under the same load. The interarticular part was subjected to the high stress. From these points, one of the valuable data to consider the cause of spondylolysis was obtained.

Value of duplex scanning compared with angiography and pressure measurement in the assessment of aortoiliac arterial lesions

NARCIS (Netherlands)

Legemate, D. A.; Teeuwen, C.; Hoeneveld, H.; Eikelboom, B. C.

1991-01-01

To detect haemodynamically significant lesions in the aortoiliac arteries, invasive tests such as angiography and intra-arterial pressure measurement (IAPM) are considered valuable diagnostic tools. The value of duplex scanning as a direct non-invasive examination technique was prospectively

Measurement of the D0 WAMUS magnet inductance

International Nuclear Information System (INIS)

Kristalinski, A.; Hance, R.; Jaskierny, W.

1994-12-01

Historically, the term inductance, as it relates to magnets, has been relatively obscure at Fermilab. Confusion resulted from the typical engineering approach to the matter, whereby distinction may not have been made between analytical and beam line magnets; and distribution transformers. The latter always have a laminated core to reduce eddy currents which makes their inductance in a transitional state very close to that in a steady state. This is true only if the core material is not in saturation, which is once again the case for transformers; but not for magnets, especially the analytical ones. Based on the traditional ''transformer'' thinking, an incorrect method to measure magnet inductance was initially employed. The characteristics of a tank circuit including the magnet under test were observed. Then based on the resonant frequency and quality factor, the inductance was calculated. This method represents a very valuable tool for magnet testing where you can compare newly built magnets to a reference magnet and see if there is any difference. Although electrically correct, this method unfortunately does not reveal any valuable information which could be used to anticipate the magnet behavior under the normal working conditions. Another method of measuring inductance, based on a freewheeling discharge of the magnet, is also widely used in the Lab. To measure the inductance, a magnet is powered from a small power supply for up to 100 A to 200 A, then the power is turned off and the current decay in the magnet is recorded. Based on the dc resistance measurements and the magnet current decay data, one can determine the magnet inductance. In order to do so, the inductance is assumed to be constant and current decay is assumed to be exponential. To find out how well the effective inductance represents the real process taking place in the magnet was one of the purposes of the experiment

What Clinical Information Is Valuable to Doctors Using Mobile Electronic Medical Records and When?

Science.gov (United States)

Kim, Junetae; Lee, Yura; Lim, Sanghee; Kim, Jeong Hoon; Lee, Byungtae; Lee, Jae-Ho

2017-10-18

There has been a lack of understanding on what types of specific clinical information are most valuable for doctors to access through mobile-based electronic medical records (m-EMRs) and when they access such information. Furthermore, it has not been clearly discussed why the value of such information is high. The goal of this study was to investigate the types of clinical information that are most valuable to doctors to access through an m-EMR and when such information is accessed. Since 2010, an m-EMR has been used in a tertiary hospital in Seoul, South Korea. The usage logs of the m-EMR by doctors were gathered from March to December 2015. Descriptive analyses were conducted to explore the overall usage patterns of the m-EMR. To assess the value of the clinical information provided, the usage patterns of both the m-EMR and a hospital information system (HIS) were compared on an hourly basis. The peak usage times of the m-EMR were defined as continuous intervals having normalized usage values that are greater than 0.5. The usage logs were processed as an indicator representing specific clinical information using factor analysis. Random intercept logistic regression was used to explore the type of clinical information that is frequently accessed during the peak usage times. A total of 524,929 usage logs from 653 doctors (229 professors, 161 fellows, and 263 residents; mean age: 37.55 years; males: 415 [63.6%]) were analyzed. The highest average number of m-EMR usage logs (897) was by medical residents, whereas the lowest (292) was by surgical residents. The usage amount for three menus, namely inpatient list (47,096), lab results (38,508), and investigation list (25,336), accounted for 60.1% of the peak time usage. The HIS was used most frequently during regular hours (9:00 AM to 5:00 PM). The peak usage time of the m-EMR was early in the morning (6:00 AM to 10:00 AM), and the use of the m-EMR from early evening (5:00 PM) to midnight was higher than during regular

Direct Measurement of Photon Recoil from a Levitated Nanoparticle

Science.gov (United States)

Jain, Vijay; Gieseler, Jan; Moritz, Clemens; Dellago, Christoph; Quidant, Romain; Novotny, Lukas

2016-06-01

The momentum transfer between a photon and an object defines a fundamental limit for the precision with which the object can be measured. If the object oscillates at a frequency Ω0 , this measurement backaction adds quanta ℏΩ0 to the oscillator's energy at a rate Γrecoil, a process called photon recoil heating, and sets bounds to coherence times in cavity optomechanical systems. Here, we use an optically levitated nanoparticle in ultrahigh vacuum to directly measure Γrecoil. By means of a phase-sensitive feedback scheme, we cool the harmonic motion of the nanoparticle from ambient to microkelvin temperatures and measure its reheating rate under the influence of the radiation field. The recoil heating rate is measured for different particle sizes and for different excitation powers, without the need for cavity optics or cryogenic environments. The measurements are in quantitative agreement with theoretical predictions and provide valuable guidance for the realization of quantum ground-state cooling protocols and the measurement of ultrasmall forces.

Recovery of drinking water and valuable minerals from acid mine drainage using an integration of magnesite, lime, soda ash, CO(sub)2 and reverse osmosis treatment processes

CSIR Research Space (South Africa)

Masindi, Vhahangwele

2017-08-01

Full Text Available that drinking water, metals, gypsum, hydrated lime/limestone were recovered from the treatment process as valuable resources. This was confirmed by X-ray diffraction (XRD) and X-ray Fluorescence (XRF). Morphological properties of initial and recovered minerals...

Recovery of valuable chlorosilane intermediates by a novel waste conversion process. Technical report for phase IIIA (final) and phase IIIB (progress)

Energy Technology Data Exchange (ETDEWEB)

Anderson, K.E.

1998-10-01

From July 1994 through May 1998, direct process residue (DPR) hydrogenolysis has been studied in the laboratory, at a small Pilot Plant, and finally at a larger Pilot Plant within Dow Corning`s Carrollton, Kentucky plant. The system reacts filtered DPR with monomer at high temperature and pressure. The process demonstrates DPR conversion up to 86%. The reaction product contains high concentrations of valuable monomers such as dimethyldichlorosilane and methyldichlorosilane. A larger DPR hydrogenolysis reactor based on these results is being designed for operation in Europe at Dow Corning`s Barry, Wales site.

Educational measurement for applied researchers theory into practice

CERN Document Server

Wu, Margaret; Jen, Tsung-Hau

2016-01-01

This book is a valuable read for a diverse group of researchers and practitioners who analyze assessment data and construct test instruments. It focuses on the use of classical test theory (CTT) and item response theory (IRT), which are often required in the fields of psychology (e.g. for measuring psychological traits), health (e.g. for measuring the severity of disorders), and education (e.g. for measuring student performance), and makes these analytical tools accessible to a broader audience. Having taught assessment subjects to students from diverse backgrounds for a number of years, the three authors have a wealth of experience in presenting educational measurement topics, in-depth concepts and applications in an accessible format. As such, the book addresses the needs of readers who use CTT and IRT in their work but do not necessarily have an extensive mathematical background. The book also sheds light on common misconceptions in applying measurement models, and presents an integrated approach to differ...

Converting environmental risks to benefits by using spent coffee grounds (SCG) as a valuable resource.

Science.gov (United States)

Stylianou, Marinos; Agapiou, Agapios; Omirou, Michalis; Vyrides, Ioannis; Ioannides, Ioannis M; Maratheftis, Grivas; Fasoula, Dionysia

2018-06-02

Coffee is perhaps one of the most vital ingredients in humans' daily life in modern world. However, this causes the production of million tons of relevant wastes, i.e., plastic cups, aluminum capsules, coffee chaff (silver skin), and spent coffee grounds (SCG), all thrown untreated into landfills. It is estimated that 1 kg of instant coffee generates around 2 kg of wet SCG; a relatively unique organic waste stream, with little to no contamination, separated directly in the source by the coffee shops. The produced waste has been under researchers' microscope as a useful feedstock for a number of promising applications. SCG is considered a valuable, nutrients rich source of bioactive compounds (e.g., phenolics, flavonoids, carotenoids, lipids, chlorogenic and protocatechuic acid, melanoidins, diterpenes, xanthines, vitamin precursors, etc.) and a useful resource material in other processes (e.g., soil improver and compost, heavy metals absorbent, biochar, biodiesel, pellets, cosmetics, food, and deodorization products). This paper aims to provide a holistic approach for the SCG waste management, highlighting a series of processes and applications in environmental solutions, food industry, and agricultural sector. Thus, the latest developments and approaches of SCG waste management are reviewed and discussed.

Market Orientation within University Schools of Business: Can a Dynamical Systems Viewpoint Applied to a Non-Temporal Data Set Yield Valuable Insights for University Managers?

Science.gov (United States)

Cox, John C.; Webster, Robert L.; Hammond, Kevin L.

2009-01-01

This study investigates the use of using complexity theory--the study of nonlinear dynamical systems of which chaos and catastrophe theory are subsets--in the analysis of a non temporal data set to derive valuable insights into the functioning of university schools of business. The approach is unusual in that studies of nonlinearity in complex…

Identification of Factors Determining Market Value of the Most Valuable Football Players

Directory of Open Access Journals (Sweden)

Sebastian Majewski

2016-03-01

Full Text Available Purpose: The problem of identifying the most important determinants of the market value of football players is quite well described in the literature. There are many works that try to identify these factors. Some of them are focused on variables to make a set complete and others are on models and methods. The aim of this article is to present the variables influencing the valuation and to build an econometric model valuing footballers playing on the forward position, taking into consideration the assumptions of the econometric modelling. Such an approach indicates managers as other sources for obtaining information. Methodology: Econometric models were used to verify the hypothesis formulated in this research. The database was created on the basis of variables presented on the website www.transfermarkt. de that presents the values of the most valuable football players in the world playing on the forward position. The Gretl program was used in the research. Findings: The literature review showed that there are many independent variables having an impact on the value of the player. There are also many different models used to valuate footballers’ performance rights. The results of estimation of models in the research indicated that such factors as Canadian classification points adjusted the market value of the team and dummy variables describing “goodwill” (only for the best players had an impact on the market value of footballers’ performance rights. Limitations/implications: Information about different factors having an impact on football players’ market value could support the investment decision process of football managers. Originality/value: The results were part of a study concerning economics of sport, particularly processes of management of football clubs and valuation of intangible assets.

Location On Natural Valuable Areas As A Condition For The Development Of Enterprises Based On The Use Of Natural Resources – The Lublin Voivodeship (Poland

Directory of Open Access Journals (Sweden)

Zwolińska-Ligaj Magdalena

2015-05-01

Full Text Available The aim of the study is to identify opportunities and constraints of the development of companies whose business is based on the exploitation of natural resources resulting from their location in areas of natural value. The study area consisted of 40 municipalities. Five companies were selected for the study in each municipality. The study used the method of diagnostic survey using a questionnaire interview. The results obtained give rise to a finding that economic activity based on the use of local natural resources, taking into account the need to protect the natural environment, is a legitimate direction and an opportunity for the development of local economies of areas of natural value. However, given the limitations of economic activities in natural valuable areas, it requires support, mainly with information and finance. The most important limitations of economic activities in natural valuable areas include the lack of preferential financial instruments, difficulties of the investment process and the lack of financial compensation for profits lost due to the location.

History of satellite missions and measurements of the Earth Radiation Budget (1957-1984)

Science.gov (United States)

House, F. B.; Gruber, A.; Hunt, G. E.; Mecherikunnel, A. T.

1986-01-01

The history of satellite missions and their measurements of the earth radiation budget from the beginning of the space age until the present time are reviewed. The survey emphasizes the early struggle to develop instrument systems to monitor reflected shortwave and emitted long-wave exitances from the earth, and the problems associated with the interpretation of these observations from space. In some instances, valuable data sets were developed from satellite measurements whose instruments were not specifically designed for earth radiation budget observations.

Optimized Jasmonic Acid Production by Lasiodiplodia theobromae Reveals Formation of Valuable Plant Secondary Metabolites.

Directory of Open Access Journals (Sweden)

Felipe Eng

Full Text Available Jasmonic acid is a plant hormone that can be produced by the fungus Lasiodiplodia theobromae via submerged fermentation. From a biotechnological perspective jasmonic acid is a valuable feedstock as its derivatives serve as important ingredients in different cosmetic products and in the future it may be used for pharmaceutical applications. The objective of this work was to improve the production of jasmonic acid by L. theobromae strain 2334. We observed that jasmonic acid formation is dependent on the culture volume. Moreover, cultures grown in medium containing potassium nitrate as nitrogen source produced higher amounts of jasmonic acid than analogous cultures supplemented with ammonium nitrate. When cultivated under optimal conditions for jasmonic acid production, L. theobromae secreted several secondary metabolites known from plants into the medium. Among those we found 3-oxo-2-(pent-2-enyl-cyclopentane-1-butanoic acid (OPC-4 and hydroxy-jasmonic acid derivatives, respectively, suggesting that fungal jasmonate metabolism may involve similar reaction steps as that of plants. To characterize fungal growth and jasmonic acid-formation, we established a mathematical model describing both processes. This model may form the basis of industrial upscaling attempts. Importantly, it showed that jasmonic acid-formation is not associated to fungal growth. Therefore, this finding suggests that jasmonic acid, despite its enormous amount being produced upon fungal development, serves merely as secondary metabolite.

Neutron capture cross section measurements: case of lutetium isotopes

International Nuclear Information System (INIS)

Roig, O.; Meot, V.; Belier, G.

2011-01-01

The neutron radiative capture is a nuclear reaction that occurs in the presence of neutrons on all isotopes and on a wide energy range. The neutron capture range on Lutetium isotopes, presented here, illustrates the variety of measurements leading to the determination of cross sections. These measurements provide valuable fundamental data needed for the stockpile stewardship program, as well as for nuclear astrophysics and nuclear structure. Measurements, made in France or in United-States, involving complex detectors associated with very rare targets have significantly improved the international databases and validated models of nuclear reactions. We present results concerning the measurement of neutron radiative capture on Lu 173 , Lu 175 , Lu 176 and Lu 177m , the measurement of the probability of gamma emission in the substitution reaction Yb 174 (He 3 ,pγ)Lu 176 . The measurement of neutron cross sections on Lu 177m have permitted to highlight the process of super-elastic scattering

E-st@r-I experience: Valuable knowledge for improving the e-st@r-II design

Science.gov (United States)

Corpino, S.; Obiols-Rabasa, G.; Mozzillo, R.; Nichele, F.

2016-04-01

Many universities all over the world have now established hands-on education programs based on CubeSats. These small and cheap platforms are becoming more and more attractive also for other-than-educational missions, such as technology demonstration, science applications, and Earth observation. This new paradigm requires the development of adequate technology to increase CubeSat performance and mission reliability, because educationally-driven missions have often failed. In 2013 the ESA Education Office launched the Fly Your Satellite! Programme which aims at increasing CubeSat mission reliability through several actions: to improve design implementation, to define best practices for conducting the verification process, and to make the CubeSat community aware of the importance of verification. Within this framework, the CubeSat team at Politecnico di Torino developed the e-st@r-II CubeSat as follow-on of the e-st@r-I satellite, launched in 2012 on the VEGA Maiden Flight. E-st@r-I and e-st@r-II are both 1U satellites with educational and technology demonstration objectives: to give hands-on experience to university students and to test an active attitude determination and control system based on inertial and magnetic measurements with magnetic actuation. This paper describes the know-how gained thanks to the e-st@r-I mission, and how this heritage has been translated into the improvement of the new CubeSat in several areas and lifecycle phases. The CubeSat design has been reviewed to reduce the complexity of the assembly procedure and to deal with possible failures of the on-board computer, for example re-coding the software in the communications subsystem. New procedures have been designed and assessed for the verification campaign accordingly to ECSS rules and with the support of ESA specialists. Different operative modes have been implemented to handle some anomalies observed during the operations of the first satellite. A new version of the on-board software is

NO2 DOAS measurements from ground and space: comparison of ground based measurements and OMI data in Mexico City

Science.gov (United States)

Rivera, C.; Stremme, W.; Grutter, M.

2012-04-01

The combination of satellite data and ground based measurements can provide valuable information about atmospheric chemistry and air quality. In this work we present a comparison between measured ground based NO2 differential columns at the Universidad Nacional Autónoma de México (UNAM) in Mexico City, using the Differential Optical Absorption Spectroscopy (DOAS) technique and NO2 total columns measured by the Ozone Monitoring Instrument (OMI) onboard the Aura satellite using the same measurement technique. From these data, distribution maps of average NO2 above the Mexico basin were constructed and hot spots inside the city could be identified. In addition, a clear footprint was detected from the Tula industrial area, ~50 km northwest of Mexico City, where a refinery, a power plant and other industries are located. A less defined footprint was identified in the Cuernavaca basin, South of Mexico City, and the nearby cities of Toluca and Puebla do not present strong enhancements in the NO2 total columns. With this study we expect to cross-validate space and ground measurements and provide useful information for future studies.

Oxide thickness measurement for monitoring fuel performance at high burnup

International Nuclear Information System (INIS)

Jaeger, M.A.; Van Swam, L.F.P.; Brueck-Neufeld, K.

1991-01-01

For on-site monitoring of the fuel performance at high burnup, Advanced Nuclear Fuels uses the linear scan eddy current method to determine the oxide thickness of irradiated Zircaloy fuel cans. Direct digital data acquisition methods are employed to collect the data on magnetic storage media. This field-proven methodology allows oxide thickness measurements and rapid interpretation of the data during the reactor outages and makes it possible to immediately reinsert the assemblies for the next operating cycle. The accuracy of the poolside measurements and data acquisition/interpretation techniques have been verified through hot cell metallographic measurements of rods previously measured in the fuel pool. The accumulated data provide a valuable database against which oxide growth models have been benchmarked and allow for effective monitoring of fuel performance. (orig.) [de

HOMOLOGOUS MEASURES OF COGNITIVE FUNCTION IN HUMAN INFANTS AND LABORATORY ANIMALS TO IDENTIFY ENVIRONMENTAL HEALTH RISKS TO CHILDREN

Science.gov (United States)

The importance of including neurodevelopmental endpoints in environmental studies is clear. A validated measure of cognitive fucntion in human infants that also has a parallel test in laboratory animal studies will provide a valuable approach for largescale studies. Such a ho...

Tolerance analysis in manufacturing using process capability ratio with measurement uncertainty

DEFF Research Database (Denmark)

Mahshid, Rasoul; Mansourvar, Zahra; Hansen, Hans Nørgaard

2017-01-01

. In this paper, a new statistical analysis was applied to manufactured products to assess achieved tolerances when the process is known while using capability ratio and expanded uncertainty. The analysis has benefits for process planning, determining actual precision limits, process optimization, troubleshoot......Tolerance analysis provides valuable information regarding performance of manufacturing process. It allows determining the maximum possible variation of a quality feature in production. Previous researches have focused on application of tolerance analysis to the design of mechanical assemblies...... malfunctioning existing part. The capability measure is based on a number of measurements performed on part’s quality variable. Since the ratio relies on measurements, elimination of any possible error has notable negative impact on results. Therefore, measurement uncertainty was used in combination with process...

LTE and the evolution to 4G wireless design and measurement challenges

CERN Document Server

Rumney, Moray

2013-01-01

A practical guide to LTE design, test and measurement, this new edition has been updated to include the latest developments This book presents the latest details on LTE from a practical and technical perspective. Written by Agilent's measurement experts, it offers a valuable insight into LTE technology and its design and test challenges. Chapters cover the upper layer signaling and system architecture evolution (SAE). Basic concepts such as MIMO and SC-FDMA, the new uplink modulation scheme, are introduced and explained, and the authors look into the challenges of verifying the

Sustainable production of valuable compound 3-succinoyl-pyridine by genetically engineering Pseudomonas putida using the tobacco waste.

Science.gov (United States)

Wang, Weiwei; Xu, Ping; Tang, Hongzhi

2015-11-17

Treatment of solid and liquid tobacco wastes with high nicotine content remains a longstanding challenge. Here, we explored an environmentally friendly approach to replace tobacco waste disposal with resource recovery by genetically engineering Pseudomonas putida. The biosynthesis of 3-succinoyl-pyridine (SP), a precursor in the production of hypotensive agents, from the tobacco waste was developed using whole cells of the engineered Pseudomonas strain, S16dspm. Under optimal conditions in fed-batch biotransformation, the final concentrations of product SP reached 9.8 g/L and 8.9 g/L from aqueous nicotine solution and crude suspension of the tobacco waste, respectively. In addition, the crystal compound SP produced from aqueous nicotine of the tobacco waste in batch biotransformation was of high purity and its isolation yield on nicotine was 54.2%. This study shows a promising route for processing environmental wastes as raw materials in order to produce valuable compounds.

Comparison of different pretreatment methods for lignocellulosic materials. Part I: conversion of rye straw to valuable products.

Science.gov (United States)

Ingram, Thomas; Wörmeyer, Kai; Lima, Juan Carlos Ixcaraguá; Bockemühl, Vera; Antranikian, Garabed; Brunner, Gerd; Smirnova, Irina

2011-04-01

The conversion of lignocellulose to valuable products requires I: a fractionation of the major components hemicellulose, cellulose, and lignin, II: an efficient method to process these components to higher valued products. The present work compares liquid hot water (LHW) pretreatment to the soda pulping process and to the ethanol organosolv pretreatment using rye straw as a single lignocellulosic material. The organosolv pretreated rye straw was shown to require the lowest enzyme loading in order to achieve a complete saccharification of cellulose to glucose. At biomass loadings of up to 15% (w/w) cellulose conversion of LHW and organosolv pretreated lignocellulose was found to be almost equal. The soda pulping process shows lower carbohydrate and lignin recoveries compared to the other two processes. In combination with a detailed analysis of the different lignins obtained from the three pretreatment methods, this work gives an overview of the potential products from different pretreatment processes. Copyright © 2011 Elsevier Ltd. All rights reserved.

Environmental protection and recovery of valuable feedstocks using carbon containing adsorbents. Developments and trends of Bergbau-Forschung GmbH

Energy Technology Data Exchange (ETDEWEB)

Knoblauch, K; Richter, E

1986-06-01

Activated carbons, active cokes and carbon molecular sieves are used for regenerative processes for environmental protection and for processing of valuable feedstocks. Development of adsorption processes and their lay-out base on adsorption equilibria, adsorption kinetics, kinetics of desorption by heating, depressurization or purging not only as single steps but in the same combination as in the regenerative process. For example, some adsorption processes are described which are applied in pilot scale or industrially: Nitrogen production from air by pressure swing adsorption (PSA); Hydrogen production from coke oven gas by PSA; Upgrading of methane from biogas and from fire damp; Removal of hydrogen sulfide from biogas; Removal of sulfur dioxide and nitrogen oxides from flue gases and drinking water supply and waste water treatment.

The Utility of Curriculum-Based Measurement and Performance Assessment as Alternatives to Traditional Intelligence and Achievement Tests.

Science.gov (United States)

Elliott, Stephen N.; Fuchs, Lynn S.

1997-01-01

Curriculum-based measurement and performance assessments can provide valuable data for making special-education eligibility decisions. Reviews applied research on these assessment approaches and discusses the practical context of treatment validation and decisions about instructional services for students with diverse academic needs. (Author/JDM)

Control of asthma in real life: still a valuable goal?

Directory of Open Access Journals (Sweden)

Andriana I. Papaioannou

2015-06-01

Full Text Available Although studies show that control of asthma can be achieved in the majority of patients, surveys repeatedly show that this is not the case in real life. Important measures to implement in order to achieve asthma control are trained healthcare professionals, a good patient–doctor relationship, patient education, avoidance of exposure to triggers, personalised management and adherence to treatment. These measures help the majority of asthma patients but have not yet been widely implemented and there should be a concerted action for their implementation. Moreover, further and focused research is needed in severe/refractory asthma.

Evaluation of passive methods for measuring ozone in the European Alps

Energy Technology Data Exchange (ETDEWEB)

Hangartner, M. [Inst. of Applied Ergonomics and Hygiene, Zurich (Switzerland); Kirchner, M. [GSF Research Centre for Environment and Human Health, Neuherberg (Germany); Werner, H. [Munich Univ. (Germany). Inst. for Bioclimatology and Environmental Research

1995-12-31

Under the leadership of the GSF research centre, various research groups were invited to make their ozone and nitrogen oxide collection systems available for comparative testing. It was considered valuable to include not only well developed systems but also methods still under development. For the main comparative test 11 working groups with differing methods took part. Essentially the goal was to evaluate of the integrating ozone measuring methods as compared to continual ozone monitoring methods under field conditions. For this the various collection systems at 6 alpine continual measuring stations in Italy and Bavaria characterising different location types, were compared over 22 weeks

Measurement of the particle production properties in ATLAS

CERN Document Server

Bruni, Alessia; The ATLAS collaboration

2017-01-01

Measurements of the particle production properties with the ATLAS detector A correct modelling of the underlying event in proton-proton collisions is important for the proper simulation of kinematic distributions of high-energy collisions. The ATLAS collaboration extended previous studies at 7 TeV with a leading track or jet or Z boson by a new study at 13 TeV, measuring the number and transverse-momentum sum of charged particles as a function of pseudorapidity and azimuthal angle in dependence of the reconstructed leading track. These measurements are sensitive to the underlying-event as well as the onset of hard emissions. The results are compared to predictions of several MC generators. A similar comparison between measurements and MC generator predictions will be shown for the strange meson content in topquark pair events. Studies of particle correlations in high-energy collisions can provide valuable insights into the detailed understanding of the space-time geometry of the hadronization region. The ATLA...

COMPARABLE MEASURES OF COGNITIVE FUNCTION IN HUMAN INFANTS AND LABORATORY ANIMALS TO IDENTIFY ENVIRONMENTAL HEALTH RISKS TO CHILDREN

Science.gov (United States)

The importance of including neurodevelopmental end points in environmental studies is clear. A validated measure of cognitive function in human infants that also has a homologous or parallel test in laboratory animal studies will provide a valuable approach for large-scale studie...

Instrumental neutron activation analysis, a valuable link in chemical metrology

International Nuclear Information System (INIS)

Zeisler, R.; Lindstrom, R.M.; Greenberg, R.R.

2002-01-01

Instrumental neutron activation analysis (INAA) is sufficiently versatile to establish a direct link to the amount of substance determined. The inherent quality parameters of INAA, such as being virtually free of blank, having fully accountable effects of matrix and physical form, and operating over a huge range of amounts, allows the comparison of a mole (or its fraction) of a pure element with the amount of substance in the sample analyzed with the same direct relationship as a beam balance provides. Indeed, varieties of this approach are in common use in INAA in the comparator methods of quantitation. To eliminate possible perturbations of the traceability chain as they may occur in common INAA practice, experimental measurements have been set up that only involve the fraction of a mole of the element(s) of interest in form of the pure element, compound or certified standard and the unknown sample. This principle has been used in INAA measurements for certification value assignment of high temperature alloy SRMs. To further demonstrate the performance parameters of INAA, we selected the determination of chromium in SRM 1152a Stainless Steel by direct non-destructive comparison with the pure metal in form of crystalline chromium. The measurements were validated with weighed aliquots of SRM 3112a dried on filter paper pellets. The experimental results do not show deviations beyond the uncertainties of the SRMs (≤ 0.2 % relative), and the assessment of the uncertainty budget indicates that expanded uncertainties of ≤ 0.3 % are achievable. The measurements demonstrate that INAA can meet the CCQM definition of a primary ratio method of analysis

Distributed Strain Measurement along a Concrete Beam via Stimulated Brillouin Scattering in Optical Fibers

Directory of Open Access Journals (Sweden)

Romeo Bernini

2011-01-01

Full Text Available The structural strain measurement of tension and compression in a 4 m long concrete beam was demonstrated with a distributed fiber-optic sensor portable system based on Brillouin scattering. Strain measurements provided by the fiber-optic sensor permitted to detect the formation of a crack in the beam resulting from the external applied load. The sensor system is valuable for structural monitoring applications, enabling the long-term performance and health of structures to be efficiently monitored.

Leaching of valuable elements from thermal power plant bottom ash using a thermo-hydrometallurgical process.

Science.gov (United States)

Bojinova, Darinka; Teodosieva, Ralitsa

2016-06-01

The solid industrial wastes generated from thermal power plants (TPPs) can be considered as renewable secondary sources for recovery of valuable metals. This study presents the results from investigations that integrated a thermo-hydro-metallurgical method for treatment of bottom ash obtained from the Enel Maritsa East 3 TPP in Bulgaria. Leaching was performed with 20, 30 and 40 wt% sulphuric acid, respectively, in an autoclave at 100(o)C, 120(o)C and 140(o)C for 120, 240, 360 and 480 min, at a constant value of the liquid/solid ratio. After autoclaving, the samples (suspensions) were diluted with a constant value of water and stirring at 50(o)C for 60 min. On the basis of the experimental data the leaching efficiency (α) of the elements in the liquid phase after filtration was estimated. The leaching of aluminium increases significantly with increasing of the temperature, reaching the maximum value of 70 wt%. The highest leaching efficiency values for the other elements are as follows: Fe (86.4%), Ca (86.6%), Na (86.6%), Ni (83.3%) and Zn (83.3%). The maximum value of leaching for Mg, K, Mn, Cu and Cr is in the interval of 46-70%. © The Author(s) 2016.

Spiser vindrikkere sundere end øldrikkere?

DEFF Research Database (Denmark)

Johansen, Ditte; Friis, Karina; Skovenborg, Erik

2007-01-01

In a cross sectional study based on information on the number, type of item and total charge of 3(1/2) million transactions over a period of 6 months in various supermarkets in Denmark we examined whether people who buy wine also buy healthier food items than those who buy beer. We found that win...... buyers bought more olives, fruit and vegetables, poultry, cocking oil and low fat cheese, milk and meat than beer buyers who bought more ready cooked meals, sugar, cold cuts, chips, pork, butter or margarine, sausages, lamb and soft drinks than wine buyers....

Food buying habits of people who buy wine or beer: cross sectional study.

Science.gov (United States)

Johansen, Ditte; Friis, Karina; Skovenborg, Erik; Grønbaek, Morten

2006-03-04

To investigate whether people who buy wine buy healthier food items than those who buy beer. Cross sectional study. Supermarkets in Denmark. Data Information on number, type of item, and total charge from 3.5 million transactions over a period of six months. Wine buyers bought more olives, fruit and vegetables, poultry, cooking oil, and low fat cheese, milk, and meat than beer buyers. Beer buyers bought more ready cooked dishes, sugar, cold cuts, chips, pork, butter or margarine, sausages, lamb, and soft drinks than wine buyers. Wine buyers made more purchases of healthy food items than people who buy beer.

Pixel-Cluster Counting Luminosity Measurement in ATLAS

CERN Document Server

McCormack, William Patrick; The ATLAS collaboration

2016-01-01

A precision measurement of the delivered luminosity is a key component of the ATLAS physics program at the Large Hadron Collider (LHC). A fundamental ingredient of the strategy to control the systematic uncertainties affecting the absolute luminosity has been to compare the measurements of several luminometers, most of which use more than one counting technique. The level of consistency across the various methods provides valuable cross-checks as well as an estimate of the detector-related systematic uncertainties. This poster describes the development of a luminosity algorithm based on pixel-cluster counting in the recently installed ATLAS inner b-layer (IBL), using data recorded during the 2015 pp run at the LHC. The noise and background contamination of the luminosity-associated cluster count is minimized by a multi-component fit to the measured cluster-size distribution in the forward pixel modules of the IBL. The linearity, long-term stability and statistical precision of the cluster-counting method are ...

Pixel-Cluster Counting Luminosity Measurement In ATLAS

CERN Document Server

AUTHOR|(SzGeCERN)782710; The ATLAS collaboration

2017-01-01

A precision measurement of the delivered luminosity is a key component of the ATLAS physics program at the Large Hadron Collider (LHC). A fundamental ingredient of the strategy to control the systematic uncertainties affecting the absolute luminosity has been to compare the measure- ments of several luminometers, most of which use more than one counting technique. The level of consistency across the various methods provides valuable cross-checks as well as an estimate of the detector-related systematic uncertainties. This poster describes the development of a luminosity algorithm based on pixel-cluster counting in the recently installed ATLAS inner b-layer (IBL), using data recorded during the 2015 pp run at the LHC. The noise and background contamination of the luminosity-associated cluster count is minimized by a multi-component fit to the measured cluster-size distribution in the forward pixel modules of the IBL. The linearity, long-term stability and statistical precision of the cluster- counting method a...

Designing clinically valuable telehealth resources: processes to develop a community-based palliative care prototype.

Science.gov (United States)

Tieman, Jennifer Joy; Morgan, Deidre Diane; Swetenham, Kate; To, Timothy Hong Man; Currow, David Christopher

2014-09-04

Changing population demography and patterns of disease are increasing demands on the health system. Telehealth is seen as providing a mechanism to support community-based care, thus reducing pressure on hospital services and supporting consumer preferences for care in the home. This study examined the processes involved in developing a prototype telehealth intervention to support palliative care patients involved with a palliative care service living in the community. The challenges and considerations in developing the palliative care telehealth prototype were reviewed against the Center for eHealth Research (CeHRes) framework, a telehealth development model. The project activities to develop the prototype were specifically mapped against the model's first four phases: multidisciplinary project management, contextual inquiry, value specification, and design. This project has been developed as part of the Telehealth in the Home: Aged and Palliative Care in South Australia initiative. Significant issues were identified and subsequently addressed during concept and prototype development. The CeHRes approach highlighted the implicit diversity in views and opinions among participants and stakeholders and enabled issues to be considered, resolved, and incorporated during design through continuous engagement. The CeHRes model provided a mechanism that facilitated "better" solutions in the development of the palliative care prototype by addressing the inherent but potentially unrecognized differences in values and beliefs of participants. This collaboration enabled greater interaction and exchange among participants resulting in a more useful and clinically valuable telehealth prototype.

3D Blade Vibration Measurements on an 80 m Diameter Wind Turbine by Using Non-contact Remote Measurement Systems

Science.gov (United States)

Ozbek, Muammer; Rixen, Daniel J.

Non-contact optical measurement systems photogrammetry and laser interferometry are introduced as cost efficient alternatives to the conventional wind turbine/farm monitoring systems that are currently in use. The proposed techniques are proven to provide an accurate measurement of the dynamic behavior of a 2.5 MW—80 m diameter—wind turbine. Several measurements are taken on the test turbine by using 4 CCD cameras and 1 laser vibrometer and the response of the turbine is monitored from a distance of 220 m. The results of the infield tests and the corresponding analyses show that photogrammetry (also can be called as videogrammetry or computer vision technique) enable the 3D deformations of the rotor to be measured at 33 different points simultaneously with an average accuracy of ±25 mm, while the turbine is rotating. Several important turbine modes can also be extracted from the recorded data. Similarly, laser interferometry (used for the parked turbine only) provides very valuable information on the dynamic properties of the turbine structure. Twelve different turbine modes can be identified from the obtained response data.

Examining the Perceived Value of Integration of Earned Value Management with Risk Management-Based Performance Measurement Baseline

Science.gov (United States)

Shah, Akhtar H.

2014-01-01

Many projects fail despite the use of evidence-based project management practices such as Performance Measurement Baseline (PMB), Earned Value Management (EVM) and Risk Management (RM). Although previous researchers have found that integrated project management techniques could be more valuable than the same techniques used by themselves, these…

Spectroscopy applied to feed additives of the European Union Reference Laboratory: a valuable tool for traceability.

Science.gov (United States)

Omar, Jone; Slowikowski, Boleslaw; Boix, Ana; von Holst, Christoph

2017-08-01

Feed additives need to be authorised to be placed on the market according to Regulation (EU) No. 1831/2003. Next to laying down the procedural requirements, the regulation creates the European Union Reference Laboratory for Feed Additives (EURL-FA) and requires that applicants send samples to the EURL-FA. Once authorised, the characteristics of the marketed feed additives should correspond to those deposited in the sample bank of the EURL-FA. For this purpose, the submitted samples were subjected to near-infrared (NIR) and Raman spectroscopy for spectral characterisation. These techniques have the valuable potential of characterising the feed additives in a non-destructive manner without any complicated sample preparation. This paper describes the capability of spectroscopy for a rapid characterisation of products to establish whether specific authorisation criteria are met. This study is based on the analysis of feed additive samples from different categories and functional groups, namely products containing (1) selenium, (2) zinc and manganese, (3) vitamins and (4) essential oils such as oregano and thyme oil. The use of chemometrics turned out to be crucial, especially in cases where the differentiation of spectra by visual inspection was very difficult.

Microbial Leaching of Some Valuable Elements From Egyptian Phosphate Rock

International Nuclear Information System (INIS)

Kamal, H.M.; Hassanein, R.A.; Mahdy, H.M.A.; Mahmoud, K.F.; Abouzeid, M.A.

2012-01-01

Four phosphate rock samples representing different phosphate mineralization modes in Egypt were selected from Abu Tartar, Nile valley and Red sea areas. Factors affecting the phosphate rock solubilization and some of the contained valuable elements by Aspergillus niger, Penicillium sp. and Pseudomonas fluorescence, were studied with especial orientation towards the completion of phosphate rock samples solubilization especially die low grade one. Effect of nitrogen source type on leaching efficiency by Aspergillus niger when two nitrogen sources on the phosphate bioleaching efficiency, it is clear that the ammonium chloride is more favorable as nitrogen source than sodium nitrate in the bioleaching of phosphate rocks. When Aspergillus niger was applied under die following conditions: 50 g/1 of sucrose as a carbon source, 0.1 N of ammonium chloride as a nitrogen source, 10 days incubation period, 0.5% solid: liquid ratio for P 2 O 5 and 5% for U and REE and - 270 mesh of grain size. The optimum leaching of P 2 O 5 , U and REE from phosphate rock samples reached (23.27%, 17.4%, 11.4%, respectively), while at -60 mesh they reached to 16.58%, 28.9%, 30.2% respectively. The optimum conditions for the maximal leaching efficiencies of P 2 O 5 , U and REE when applying the Penicillium sp. from the phosphate rock samples were: 100 g/1 of sucrose as a carbon source for P 2 O 5 and U and 10 g/1 for REE, 7,15 and 10 days incubation period for P 2 O 5 , U and REE, respectively, 0.5% solid: liquid ratio for P 2 O 5 and 5% for U and REE. Finally, the application of phosphate rock samples grinded to -270 mesh of grain size for P 2 O 5 and (-60 to -140) for U and REE. The studied leaching efficiency of P 2 O 5 , U and REE gave at -270 mesh 33.66%, 24.3%, 15.9% respectively, while at -60 mesh they gave 33.76%, 26.7%, 17.8% and at -140 mesh gave 31.32%, 27.9%, 17.6%, respectively.The optimum conditions for the P 2 O 5 leaching efficiency when applying the Pseudomonas fluorescence were

Relaxation time measurements of white and grey matter in multiple sclerosis patients

International Nuclear Information System (INIS)

Rinck, P.A.; Appel, B.; Moens, E.; Academisch Ziekenhuis Middelheim, Antwerp

1987-01-01

In a patient population of some 450 with definite, probable, and possible multiple sclerosis referred to us for MRI, some 40 suffering from definite MS were chosen randomly for relaxation time measurements of plaque-free grey and white matter. T 1 values could not be used for diagnostic purposes owing to their broad standard deviation. Overall white matter T 2 was slightly higher in MS patients than in a non-MS population (94 ms versus 89 ms). Because these changes are not visible in MR images, relaxation time measurements may prove valuable for differential diagnosis. (orig.) [de

Application of a new importance measure for parametric uncertainty in PSA

International Nuclear Information System (INIS)

Poern, K.

1997-04-01

The traditional approach to uncertainty analysis in PSA, with propagation of basic event uncertainties through the PSA model, generates as an end product the uncertainty distribution of the top event frequency. This distribution, however, is not of much value for the decision maker. Most decisions are made under uncertainty. What the decision maker needs, to enhance the decision-making quality, is an adequate uncertainty importance measure that provides the decision maker with an indication of on what basic parameters it would be most valuable - as to the quality of the decision making in the specific situation - to procure more information. This paper will describe an application of a new measure of uncertainty importance that has been developed in the ongoing joint Nordic project NKS/RAK-1:3. The measure is called ''decision oriented'' because it is defined within a decision theoretic framework. It is defined as the expected value of a certain additional information about each basic parameter, and utilizes both the system structure and the complete uncertainty distributions of the basic parameters. The measure provides the analyst and the decision maker with a diagnostic information pointing to parameters on which more information would be most valuable to procure in order to enhance the decision-making quality. This uncertainty importance measure must not be confused with the more well-known, traditional importance measures of various kinds that are used to depict the contributions of each basic event or parameter (represented by point values) to the top event frequency. In this study the new measure is practically demonstrated through a real application on the top event: Water overflow through steam generator safety valves caused by steam generator tube rupture. This application object is one of the event sequences that the fore mentioned Nordic project has analysed with an integrated approach. The project has been funded by the Swedish Nuclear Power

The Stingless Bee Melipona solani Deposits a Signature Mixture and Methyl Oleate to Mark Valuable Food Sources.

Science.gov (United States)

Alavez-Rosas, David; Malo, Edi A; Guzmán, Miguel A; Sánchez-Guillén, Daniel; Villanueva-Gutiérrez, Rogel; Cruz-López, Leopoldo

2017-10-01

Stingless bees foraging for food improve recruitment by depositing chemical cues on valuable food sites or pheromone marks on vegetation. Using gas chromatography/mass spectrometry and bioassays, we showed that Melipona solani foragers leave a mixture composed mostly of long chain hydrocarbons from their abdominal cuticle plus methyl oleate from the labial gland as a scent mark on rich food sites. The composition of hydrocarbons was highly variable among individuals and varied in proportions, depending on the body part. A wide ratio of compounds present in different body parts of the bees elicited electroantennogram responses from foragers and these responses were dose dependent. Generally, in bioassays, these bees prefer to visit previously visited feeders and feeders marked with extracts from any body part of conspecifics. The mean number of visits to a feeder was enhanced when synthetic methyl oleate was added. We propose that this could be a case of multi-source odor marking, in which hydrocarbons, found in large abundance, act as a signature mixture with attraction enhanced through deposition of methyl oleate, which may indicate a rich food source.

Level and Contamination Assessment of Soil along an Expressway in an Ecologically Valuable Area in Central Poland.

Science.gov (United States)

Radziemska, Maja; Fronczyk, Joanna

2015-10-23

Express roads are a potential source of heavy metal contamination in the surrounding environment. The Warsaw Expressway (E30) is one of the busiest roads in the capital of Poland and cuts through the ecologically valuable area (Mazowiecki Natural Landscape Park). Soil samples were collected at distances of 0.5, 4.5 and 25 m from the expressway. The concentrations of cadmium (Cd), copper (Cu), nickel (Ni), lead (Pb), and zinc (Zn) were determined in the soils by the flame atomic absorption spectrometry method (FAAS). Soils located in the direct proximity of the analyzed stretch of road were found to have the highest values of pH and electrical conductivity (EC), which decreased along with an increase in the distance from the expressway. The contents of Cd, Cu and Zn were found to be higher than Polish national averages, whereas the average values of Ni and Pb were not exceeded. The pollution level was estimated based on the geo-accumulation index (Igeo), and the pollution index (PI). The results of Igeo and PI indexes revealed the following orders: Cu zinc, lead and cadmium.

Gasification biochar as a valuable by-product for carbon sequestration and soil amendment

International Nuclear Information System (INIS)

Hansen, Veronika; Müller-Stöver, Dorette; Ahrenfeldt, Jesper; Holm, Jens Kai; Henriksen, Ulrik Birk; Hauggaard-Nielsen, Henrik

2015-01-01

Thermal gasification of various biomass residues is a promising technology for combining bioenergy production with soil fertility management through the application of the resulting biochar as soil amendment. In this study, we investigated gasification biochar (GB) materials originating from two major global biomass fuels: straw gasification biochar (SGB) and wood gasification biochar (WGB), produced by a Low Temperature Circulating Fluidized Bed gasifier (LT-CFB) and a TwoStage gasifier, respectively, optimized for energy conversion. Stability of carbon in GB against microbial degradation was assessed in a short-term soil incubation study and compared to the traditional practice of direct incorporation of cereal straw. The GBs were chemically and physically characterized to evaluate their potential to improve soil quality parameters. After 110 days of incubation, about 3% of the added GB carbon was respired as CO 2 , compared to 80% of the straw carbon added. The stability of GB was also confirmed by low H/C and O/C atomic ratios with lowest values for WGB (H/C 0.12 and O/C 0.10). The soil application of GBs exhibited a liming effect increasing the soil pH from ca 8 to 9. Results from scanning electron microscopy and BET analyses showed high porosity and specific surface area of both GBs, indicating a high potential to increase important soil quality parameters such as soil structure, nutrient and water retention, especially for WGB. These results seem promising regarding the possibility to combine an efficient bioenergy production with various soil aspects such as carbon sequestration and soil quality improvements. - Highlights: • Biomass gasification can combine efficient bioenergy production with valuable biochar residuals for soil improvements. • The two investigated gasification biochars are recalcitrant indicating soil carbon sequestration potential. • Gasification biochars are potential soil improvers due to high specific surface area, liming effect

The Classroom Observation Schedule to Measure Intentional Communication (COSMIC): an observational measure of the intentional communication of children with autism in an unstructured classroom setting.

Science.gov (United States)

Pasco, Greg; Gordon, Rosanna K; Howlin, Patricia; Charman, Tony

2008-11-01

The Classroom Observation Schedule to Measure Intentional Communication (COSMIC) was devised to provide ecologically valid outcome measures for a communication-focused intervention trial. Ninety-one children with autism spectrum disorder aged 6 years 10 months (SD 16 months) were videoed during their everyday snack, teaching and free play activities. Inter-rater reliability was high and relevant items showed significant associations with comparable items from concurrent Autism Diagnostic Observation Schedule-Generic (Lord et al. 2000, J Autism Dev Disord 30(3):205-223) assessments. In a subsample of 28 children initial differences in rates of initiations, initiated speech/vocalisation and commenting were predictive of language and communication competence 15 months later. Results suggest that the use of observational measures of intentional communication in natural settings is a valuable assessment strategy for research and clinical practice.

Electronic resources of the rare books and valuable editions department of the Central Scientific Library of the V.N. Karazin Kharkiv National University: open access for research

Directory of Open Access Journals (Sweden)

І. К. Журавльова

2014-12-01

Full Text Available The article describes tasks that electronic collections of rare books fulfill: broad access for readers to rare and valuable editions providing, preservation of ensuring of the original. On the example of the electronic collection of the Central Scientific Library of the V.N. Karazin Kharkiv National University – «eScriptorium: electronic archive of rare books and manuscripts for research and education» the possibility of the full-text resources of the valuable editions using is shown. The principles of creation, structure, chronological frameworks, directions of adding the documents to the archive are represented. The perspectives of the project development are outlined as well as examples of the digital libraries of the European countries and Ukraine are provided, the actual task of preserving the originals of the rare books of the country is raised, the innovative approaches to serving users with electronic resources are considered. The evidences of cooperation of the Central Scientific Library of the V.N. Karazin Kharkiv National University with the largest world digital libraries: World Digital Library and Europeana are provided.

Real-world effectiveness of e-cigarettes when used to aid smoking cessation: a cross-sectional population study.

Science.gov (United States)

Brown, Jamie; Beard, Emma; Kotz, Daniel; Michie, Susan; West, Robert

2014-09-01

Electronic cigarettes (e-cigarettes) are rapidly increasing in popularity. Two randomized controlled trials have suggested that e-cigarettes can aid smoking cessation, but there are many factors that could influence their real-world effectiveness. This study aimed to assess, using an established methodology, the effectiveness of e-cigarettes when used to aid smoking cessation compared with nicotine replacement therapy (NRT) bought over-the-counter and with unaided quitting in the general population. A large cross-sectional survey of a representative sample of the English population. The study included 5863 adults who had smoked within the previous 12 months and made at least one quit attempt during that period with either an e-cigarette only (n = 464), NRT bought over-the-counter only (n = 1922) or no aid in their most recent quit attempt (n = 3477). The primary outcome was self-reported abstinence up to the time of the survey, adjusted for key potential confounders including nicotine dependence. E-cigarette users were more likely to report abstinence than either those who used NRT bought over-the-counter [odds ratio (OR) = 2.23, 95% confidence interval (CI) = 1.70-2.93, 20.0 versus 10.1%] or no aid (OR = 1.38, 95% CI = 1.08-1.76, 20.0 versus 15.4%). The adjusted odds of non-smoking in users of e-cigarettes were 1.63 (95% CI = 1.17-2.27) times higher compared with users of NRT bought over-the-counter and 1.61 (95% CI = 1.19-2.18) times higher compared with those using no aid. Among smokers who have attempted to stop without professional support, those who use e-cigarettes are more likely to report continued abstinence than those who used a licensed NRT product bought over-the-counter or no aid to cessation. This difference persists after adjusting for a range of smoker characteristics such as nicotine dependence. © 2014 The Authors. Addiction published by John Wiley & Sons Ltd on behalf of Society for the Study of Addiction.

Measuring Learning Outcomes. A Learner Perspective in Auditing Education

DEFF Research Database (Denmark)

Holm, Claus; Steenholdt, Niels

The ability to provide sensible measures for learning outcomes in accounting education is under increased scrutiny. In this paper we use a learner perspective in auditing education which reflects that some students taking accounting classes also are provided with on-the-job training in accounting...... is part of every day life within most accounting firms. Developing a sound on-the-job training environment is pivotal in the recruitment and design of supervision, and in the end for the expected "successrate" in retaining (valuable) employees. Prior research suggests that scripts or schemas provide...

Heterozygous CDKL5 Knockout Female Mice Are a Valuable Animal Model for CDKL5 Disorder

Directory of Open Access Journals (Sweden)

Claudia Fuchs

2018-01-01

Full Text Available CDKL5 disorder is a severe neurodevelopmental disorder caused by mutations in the X-linked CDKL5 (cyclin-dependent kinase-like five gene. CDKL5 disorder primarily affects girls and is characterized by early-onset epileptic seizures, gross motor impairment, intellectual disability, and autistic features. Although all CDKL5 female patients are heterozygous, the most valid disease-related model, the heterozygous female Cdkl5 knockout (Cdkl5 +/− mouse, has been little characterized. The lack of detailed behavioral profiling of this model remains a crucial gap that must be addressed in order to advance preclinical studies. Here, we provide a behavioral and molecular characterization of heterozygous Cdkl5 +/− mice. We found that Cdkl5 +/− mice reliably recapitulate several aspects of CDKL5 disorder, including autistic-like behaviors, defects in motor coordination and memory performance, and breathing abnormalities. These defects are associated with neuroanatomical alterations, such as reduced dendritic arborization and spine density of hippocampal neurons. Interestingly, Cdkl5 +/− mice show age-related alterations in protein kinase B (AKT and extracellular signal-regulated kinase (ERK signaling, two crucial signaling pathways involved in many neurodevelopmental processes. In conclusion, our study provides a comprehensive overview of neurobehavioral phenotypes of heterozygous female Cdkl5 +/− mice and demonstrates that the heterozygous female might be a valuable animal model in preclinical studies on CDKL5 disorder.

BENCHMARKING ORTEC ISOTOPIC MEASUREMENTS AND CALCULATIONS

Energy Technology Data Exchange (ETDEWEB)

Dewberry, R; Raymond Sigg, R; Vito Casella, V; Nitin Bhatt, N

2008-09-29

these cases the ISOTOPIC analysis program is especially valuable because it allows a rapid, defensible, reproducible analysis of radioactive content without tedious and repetitive experimental measurement of {gamma}-ray transmission through the sample and container at multiple photon energies. The ISOTOPIC analysis technique is also especially valuable in facility holdup measurements where the acquisition configuration does not fit the accepted generalized geometries where detector efficiencies have been solved exactly with good calculus. Generally in facility passive {gamma}-ray holdup measurements the acquisition geometry is only approximately reproducible, and the sample (object) is an extensive glovebox or HEPA filter component. In these cases accuracy of analyses is rarely possible, however demonstrating fissile Pu and U content within criticality safety guidelines yields valuable operating information. Demonstrating such content can be performed with broad assumptions and within broad factors (e.g. 2-8) of conservatism. The ISOTOPIC analysis program yields rapid defensible analyses of content within acceptable uncertainty and within acceptable conservatism without extensive repetitive experimental measurements. In addition to transmission correction determinations based on the mass and composition of objects, the ISOTOPIC program performs finite geometry corrections based on object shape and dimensions. These geometry corrections are based upon finite element summation to approximate exact closed form calculus. In this report we provide several benchmark comparisons to the same technique provided by the Canberra In Situ Object Counting System (ISOCS) and to the finite thickness calculations described by Russo in reference 10. This report describes the benchmark comparisons we have performed to demonstrate and to document that the ISOTOPIC analysis program yields the results we claim to our customers.

Measurement of micro moulded parts by Computed Tomography and comparison to optical and tactile techniques

DEFF Research Database (Denmark)

Yagüe, J.A.; Tosello, Guido; Carmignato, S

2011-01-01

This paper focuses on dimensional verification of two micro-injection moulded components, selected from actual industrial productions, using CT metrological tools. In addition to CT scanning, also a tactile Coordinate Measuring Machine (CMM) with sub-micrometer uncertainty and an Optical Coordinate...... Measuring Machine (OCMM) allowing fast measurements suitable for in-line quality control were employed as validation instruments. The experimental work carried out and the analysis of the results provide valuable conclusions about the advantages and drawbacks of using CT metrology in comparison with CMM...... and OCMM when these techniques are employed for quality control of micro moulded parts....

A process to preserve valuable compounds and acquire essential oils from pomelo flavedo using a microwave irradiation treatment.

Science.gov (United States)

Liu, Zaizhi; Zu, Yuangang; Yang, Lei

2017-06-01

A microwave pretreatment method was developed to preserve pectin, naringin, and limonin contents in pomelo flavedo to allow for longer storage times and subsequent extraction of pomelo essential oil. In terms of the essential oil, microwave pretreatment performed better than hydrodistillation with respect to extraction efficiency (1.88±0.06% in 24min versus 1.91±0.08% in 240min), oxygenation fraction (48.59±1.32% versus 29.63±1.02%), energy consumption (0.15kWh versus 1.54kWh), and environmental impact (123.20g CO 2 versus 1232g CO 2 ). Microwave-pretreated samples retained higher amounts of pectin, naringin, and limonin compared with non-pretreated samples. No obvious change in the degree of pectin esterification was observed. This study shows that the proposed process is a promising methodology for both preserving valuable compounds in pomelo flavedo during storage and acquiring essential oils. Copyright © 2016 Elsevier Ltd. All rights reserved.

46th Annual meeting on nuclear technology (AMNT 2015). Key topic / Enhanced safety and operation excellence / Sustainable reactor operation management - safe, efficient, valuable

International Nuclear Information System (INIS)

Fischer, Erwin

2015-01-01

Summary report on the following Topical Session of the 46 th Annual Conference on Nuclear Technology (AMNT 2015) held in Berlin, 5 to 7 May 2015: - Sustainable Reactor Operation Management - Safe, Efficient, Valuable (Erwin Fischer) The other Sessions of the Key Topics - ''Outstanding Know-How and Sustainable Innovations'', - ''Enhanced Safety and Operation Excellence'' and - ''Decommissioning Experience and Waste Management Solutions'' have been covered in atw 7 (2015) and will be covered in further issues of atw.

Carbon footprint of SURFnet 2011

Energy Technology Data Exchange (ETDEWEB)

Kruithof, G.H.; Meulenhoff, P.J.

2012-04-15

SURFnet wants to account for its energy consumption, in a way that it can compare itself to other National Research and Education Networks (NRENs) in Europe. To that end, an assessment was held to account for the Greenhouse Gas (GHG) emission in 2010, according to the ISO 14064:2006 part 1 standard. The quantitative assessment is limited to Scope 1 (direct emissions) and Scope 2 (indirect emissions related to bought energy). Accounting for Scope 3 emissions (e.g. emissions related to the production of bought products, travel, waste) is not included in this assessment. Only a qualitative assessment of the GHG emissions in Scope 3 emissions was done.

DTI measurements for Alzheimer’s classification

Science.gov (United States)

Maggipinto, Tommaso; Bellotti, Roberto; Amoroso, Nicola; Diacono, Domenico; Donvito, Giacinto; Lella, Eufemia; Monaco, Alfonso; Antonella Scelsi, Marzia; Tangaro, Sabina; Disease Neuroimaging Initiative, Alzheimer's.

2017-03-01

Diffusion tensor imaging (DTI) is a promising imaging technique that provides insight into white matter microstructure integrity and it has greatly helped identifying white matter regions affected by Alzheimer’s disease (AD) in its early stages. DTI can therefore be a valuable source of information when designing machine-learning strategies to discriminate between healthy control (HC) subjects, AD patients and subjects with mild cognitive impairment (MCI). Nonetheless, several studies have reported so far conflicting results, especially because of the adoption of biased feature selection strategies. In this paper we firstly analyzed DTI scans of 150 subjects from the Alzheimer’s disease neuroimaging initiative (ADNI) database. We measured a significant effect of the feature selection bias on the classification performance (p-value  informative content provided by DTI measurements for AD classification. Classification performances and biological insight, concerning brain regions related to the disease, provided by cross-validation analysis were both confirmed on the independent test.

The Internet of Names: A DNS Big Dataset - Actively Measuring 50% of the Entire DNS Name Space, Every Day

NARCIS (Netherlands)

van Rijswijk, Roland M.; Jonker, Mattijs; Sperotto, Anna; Pras, Aiko

2015-01-01

The Domain Name System (DNS) is part of the core infrastructure of the Internet. Tracking changes in the DNS over time provides valuable information about the evolution of the Internet’s infrastructure. Until now, only one large-scale approach to perform these kinds of measurements existed, passive

Suplemento artesanal oral: uma proposta para recuperação nutricional de crianças e adolescentes com câncer Homemade oral supplement: a proposal for the nutritional recovery of children and adolescents with cancer

Directory of Open Access Journals (Sweden)

Fernanda Rodrigues Alves

2010-10-01

recuperação nutricional de pacientes oncológicos e uma opção para populações financeiramente desfavorecidas.Objective The aim of this study was to evaluate the impact of homemade oral supplements on the nutritional recovery of patients with mild or severe malnutrition or at nutritional risk. Methods Eight recipes of homemade oral supplements containing 30% to 35% of the total energy expenditure were proposed. The patients with severe malnutrition (group B received the oral supplement for 2 weeks and the others for 4 weeks (group A. Oral supplementation with homemade supplements was compared with oral supplementation with store-bought supplements, investigated earlier with a protocol with the same design. Results Homemade oral supplements contain much lower amounts of certain micronutrients but are five times cheaper than store-bought supplements. In group A, 88% of the patients taking homemade oral supplements and 84% of the patients taking store-bought supplements responded positively to supplementation. In group B, 22% of the patients taking homemade oral supplements and 25% of the patients taking store-bought supplements recovered. The difference was not significant. The impact of store-bought supplementation on the triceps skinfold thicknesses and arm circumferences of the patients in group A was greater than that obtained with homemade supplements. In group B, the effect on triceps skinfold thickness was not significant (p=0.16. Patients taking homemade or store-bought oral supplements presented similar protein and energy intakes and improvements in nutritional status. Only the body composition of patients in group A taking store-bought oral supplements was better. Conclusion The results obtained by this study suggest that the therapeutic use of homemade oral supplements is an alternative capable of promoting the nutritional recovery of cancer patients, especially those who cannot afford store-bought supplements.

Electron beam writing on semiconductors

International Nuclear Information System (INIS)

Bierhenke, H.; Kutzer, E.; Pascher, A.; Plitzner, H.; Rummel, P.; Siemens A.G., Muenchen; Siemens A.G., Muenchen

1979-08-01

Reported are the results of the 3 1/2 year research project 'Electron beam Writing on Semiconductors'. Work has been done in the field of direct wafer exposure techniques, and of mask making. Described are resist technology, setting up of a research device, exploration of alignment procedures, manufacturing of devices and their radiation influence. Furthermore, investigations and measurements of an electron beam machine bought for mask making purposes, the development of LSI-circuits with this machine, the software necessary and important developments of digital subsystems are reported. (orig.) [de

Investigation of a valuable biochemical indicator in radiotherapy. Pt. 2

International Nuclear Information System (INIS)

Horvath, M.; Geszti, O.; Benedek, E.; Farkas, J.; Reischl, G.

1979-01-01

The hemoglobin level of blood plasma is a sensitive tool in measuring radiation effects. Its value has increased in most of the cases during radiotherapy of cancer patients even applied at low doses. Haptoglobins behave similarly, the timedependent changes during radiotherapy are almost identical at both parameters. (orig.) [de

Theoretical orientation and therapists' attitudes to important components of therapy: a study based on the valuable elements in psychotherapy questionnaire.

Science.gov (United States)

Larsson, Billy P M; Kaldo, Viktor; Broberg, Anders G

2010-01-01

The authors describe the inception and subsequent testing of a questionnaire on attitudes regarding how psychotherapy ought to be pursued: the Valuable Elements in Psychotherapy Questionnaire (VEP-Q). A sample of 416 Swedish therapists (161 psychodynamic, 93 cognitive, 95 cognitive behavioral, and 67 integrative/eclectic) responded to the 17-item VEP-Q. A factor analysis of these items resulted in three subscales: PDT, CBT, and Common Factor, as validated by analyses of covariance. The internal consistency and test-retest reliability of the scales were excellent. In addition to theoretical orientation, variables such as gender and basic professional training influenced how respondents answered the VEP-Q. The authors conclude that the VEP-Q seems to be an appropriate instrument for describing similarities as well as differences among practitioners of various schools of psychotherapy.

Measuring the User Experience

Directory of Open Access Journals (Sweden)

Harry B. Santoso

2016-01-01

Full Text Available The aim of the current study is to develop an adapted version of User Experience Questionnaire (UEQ and evaluate a learning management system. Although there is a growing interest on User Experience, there are still limited resources (i.e. measurement tools or questionnaires available to measure user experience of any products, especially learning management systems. Two hundreds and thirteen computer science students participated and completed the adapted version of UEQ. In the study, the researchers used a learning management system named Student Centered e-Learning Environment (SCELE. Several types of learning materials are posted in SCELE such as audio files, simulations, PowerPoint slides, multimedia contents, and webpage links. Most of the lecturers use discussion forums in their courses to encourage students to participate in active learning setting. Staff and lecturers sometimes post academic-related announcements on the SCELE homepage. Two hundred thirteen students enrolled in Computer Science program were invited to evaluate the SCELE. This study will benefit UX practitioners, HCI educators, program and center of learning resources administrators, and learning management system developers. Findings of the present study may also be valuable for universities and high schools which are using computer-based learning environments.

Measurement of Thermal Radiation Properties of Solids

Science.gov (United States)

Richmond, J. C. (Editor)

1963-01-01

The overall objectives of the Symposium were to afford (1) an opportunity for workers in the field to describe the equipment and procedures currently in use for measuring thermal radiation properties of solids, (2) an opportunity for constructive criticism of the material presented, and (3) an open forum for discussion of mutual problems. It was also the hope of the sponsors that the published proceedings of the Symposium would serve as a valuable reference on measurement techniques for evaluating thermal radiation properties of solids, partic.ularly for those with limited experience in the field. Because of the strong dependence of emitted flux upon temperature, the program committee thought it advisable to devote the first session to a discussion of the problems of temperature measurement. All of the papers in Session I were presented at the request of and upon topics suggested by the Committee. Because of time and space limitations, it, was impossible to consider all temperature measurement problems that might arise--the objective was rather to call to the attention of the reader some of the problems that might be encountered, and to provide references that might provide solutions.

Measurement of flow characteristics of solid particles mixed with gas in pipelines

Energy Technology Data Exchange (ETDEWEB)

Siberev, S P; Nazarov, S I; Soldatkin, G I

1983-01-01

A mathematical model of the interaction of solid particles in a gas stream flowing through a pipeline comprises equations for the energy and material balances in the system and for force and energy interactions between the solid particles and transducers located within the pipeline. Soviet researchers confirmed that the average value of stress recorded by a transducer is proportional to the average kinetic energy of the particles; for a constant particle speed, the stress is proportional to the mass flow of the particles. The analysis and flow transducer measurements are valuable in measuring and controlling flowline sand and soil in natural gas transport from gas wells and undergound storage facilities.

Mobile Radiological Laboratories Intercomparison Measurements - Chernobyl

International Nuclear Information System (INIS)

Martincic, R.; Glavic-Cindro, D.; Korun, M.; Pucelj, B.; Vodenik, B.

2001-01-01

Full text: In last decade different institutions in European countries have organised periodic intercomparison exercises of mobile radiological laboratories to improve the preparedness of emergency monitoring teams. The 12th Regular Workshop on Mobile Radiological Laboratories was held in Exclusion Zone of the Chernobyl NPP, Ukraine from September 13 to September 18, 1999 under the acronym MORAL-12. The European Centre of Technological Safety (TESEC), Kiev, Ukraine and J. Stefan Institute, Ljubljana, Slovenia organised Intercomparison Measurements 99 jointly under the auspices of the International Atomic Energy Agency (IAEA). Nineteen teams from 9 countries and IAEA participated in the Workshop. Six field and personal and equipment contamination control exercises were prepared and conducted at two measuring sites with very different ambient dose rate levels. The Workshop pointed out that such exercises are very valuable for rapid, efficient and harmonised emergency response in case of nuclear or radiological emergency. The teams had an opportunity to test their ability to perform field measurements in the contaminated environment, and to report results on the spot, as well as to test their emergency preparedness and persistence. They gained new experiences for fieldwork under stress conditions. An overview and results of these intercomparison measurements are presented and lessons learned are discussed. (author)

Tolerance measurements on internal- and external-hexagon implants.

Science.gov (United States)

Braian, Michael; De Bruyn, Hugo; Fransson, Håkan; Christersson, Cecilia; Wennerberg, Ann

2014-01-01

To measure the horizontal machining tolerances of the interface between internal- and external-hexagon implants and analogs with corresponding components after delivery from the manufacturer. These values may be a valuable tool for evaluating increasing misfit caused by fabrication, processing, and wear. Seven implants and seven analogs with external- and internal-hexagon connections (Biomet 3i) with corresponding prefabricated gold cylinders and gold screws, prefabricated cylindric plastic cylinders, and laboratory screws were studied. One set of components from the external and internal groups was measured manually and digitally. Measurements from the test subjects were compared with identical measurements from the virtual model to obtain threshold values. The virtual model was then used to obtain optimally oriented cuts. The horizontal machining tolerances for castable plastic abutments on external implants were 12 ± 89 μm, and for internal implants they were 86 ± 47 μm. Tolerance measurements on prefabricated gold abutments for external implants were 44 ± 9 μm, and for internal implants they were 58 ± 28 μm. The groups with metallic components showed the smallest tolerance at external group and internal group. The prefabricated plastic cylinder groups ranged from external and internal connection.

3D-Printed specimens as a valuable tool in anatomy education: A pilot study.

Science.gov (United States)

Garas, Monique; Vaccarezza, Mauro; Newland, George; McVay-Doornbusch, Kylie; Hasani, Jamila

2018-06-06

Three-dimensional (3D) printing is a modern technique of creating 3D-printed models that allows reproduction of human structures from MRI and CT scans via fusion of multiple layers of resin materials. To assess feasibility of this innovative resource as anatomy educational tool, we conducted a preliminary study on Curtin University undergraduate students to investigate the use of 3D models for anatomy learning as a main goal, to assess the effectiveness of different specimen types during the sessions and personally preferred anatomy learning tools among students as secondary aim. The study consisted of a pre-test, exposure to test (anatomical test) and post-test survey. During pre-test, all participants (both without prior experience and experienced groups) were given a brief introduction on laboratory safety and study procedure thus participants were exposed to 3D, wet and plastinated specimens of the heart, shoulder and thigh to identify the pinned structures (anatomical test). Then, participants were provided a post-test survey containing five questions. In total, 23 participants completed the anatomical test and post-test survey. A larger number of participants (85%) achieved right answers for 3D models compared to wet and plastinated materials, 74% of population selected 3D models as the most usable tool for identification of pinned structures and 45% chose 3D models as their preferred method of anatomy learning. This preliminary small-size study affirms the feasibility of 3D-printed models as a valuable asset in anatomy learning and shows their capability to be used adjacent to cadaveric materials and other widely used tools in anatomy education. Copyright © 2018 Elsevier GmbH. All rights reserved.

Influence of measurement errors and estimated parameters on combustion diagnosis

International Nuclear Information System (INIS)

Payri, F.; Molina, S.; Martin, J.; Armas, O.

2006-01-01

Thermodynamic diagnosis models are valuable tools for the study of Diesel combustion. Inputs required by such models comprise measured mean and instantaneous variables, together with suitable values for adjustable parameters used in different submodels. In the case of measured variables, one may estimate the uncertainty associated with measurement errors; however, the influence of errors in model parameter estimation may not be so easily established on an experimental basis. In this paper, a simulated pressure cycle has been used along with known input parameters, so that any uncertainty in the inputs is avoided. Then, the influence of errors in measured variables and geometric and heat transmission parameters on the results of a diagnosis combustion model for direct injection diesel engines have been studied. This procedure allowed to establish the relative importance of these parameters and to set limits to the maximal errors of the model, accounting for both the maximal expected errors in the input parameters and the sensitivity of the model to those errors

Performance of different synchronization measures in real data: A case study on electroencephalographic signals

Science.gov (United States)

Quian Quiroga, R.; Kraskov, A.; Kreuz, T.; Grassberger, P.

2002-04-01

We study the synchronization between left and right hemisphere rat electroencephalographic (EEG) channels by using various synchronization measures, namely nonlinear interdependences, phase synchronizations, mutual information, cross correlation, and the coherence function. In passing we show a close relation between two recently proposed phase synchronization measures and we extend the definition of one of them. In three typical examples we observe that except mutual information, all these measures give a useful quantification that is hard to be guessed beforehand from the raw data. Despite their differences, results are qualitatively the same. Therefore, we claim that the applied measures are valuable for the study of synchronization in real data. Moreover, in the particular case of EEG signals their use as complementary variables could be of clinical relevance.

A computerized system to measure interproximal alveolar bone levels in epidemiologic, radiographic investigations. I

International Nuclear Information System (INIS)

Wouters, F.R.; Jon-And, C.; Frithiof, L.; Soeder, P.Oe.; Lavstedt, S.

1988-01-01

The aims of the study were to adapt a computerized system to epidemiologic conditions, for rapid full-mouth measurements of alveolar bone levels from X5-magnified periapical radiographs and to analyze the variations in measurement due to different system components. Full-mouth measurements of interproximal alveolar bone height in percentage of root and tooth lengths were completed within av average time of 15 min. per set of radiographs. An analysis of variance showed that the examiner variation in measurement of a linear scale distance was 0.02 mm. The measurement accuracy was different for different distances. Each distance (d) measured with this system should therefore be calibrated with the equation Y = -0.007 - 0.014 (log 3d - 1.50) where Y is the estimate of measurement accuracy. The present computerized system enabled rapid recordings and demonstrated good measurement precision and accuracy. These are valuable features in epidemiologic investigations

46{sup th} Annual meeting on nuclear technology (AMNT 2015). Key topic / Enhanced safety and operation excellence / Sustainable reactor operation management - safe, efficient, valuable

Energy Technology Data Exchange (ETDEWEB)

Fischer, Erwin [E.ON Kernkraft GmbH, Global Unit Next Generation, Hannover (Germany)

2015-08-15

Summary report on the following Topical Session of the 46{sup th} Annual Conference on Nuclear Technology (AMNT 2015) held in Berlin, 5 to 7 May 2015: - Sustainable Reactor Operation Management - Safe, Efficient, Valuable (Erwin Fischer) The other Sessions of the Key Topics - ''Outstanding Know-How and Sustainable Innovations'', - ''Enhanced Safety and Operation Excellence'' and - ''Decommissioning Experience and Waste Management Solutions'' have been covered in atw 7 (2015) and will be covered in further issues of atw.

Morphoanatomical and physicochemical profile of Piper callosum: valuable assessment for its quality control

Directory of Open Access Journals (Sweden)

Rolf J.F. Silva

Full Text Available ABSTRACT Piper callosum Ruiz & Pav., Piperaceae, popularly known as “elixir-paregórico” and “matricá” in Brazil, is used in folk medicine to treat gonorrhea, general pain, and digestive disorders, and has repellent, astringent, diuretic, depurative, and haemostatic properties. Despite the fact that this plant is sold as a traditional phytotherapeutic product, we did not find reports on its quality control. We, therefore, performed macroscopic, microscopic, histochemical, and physicochemical analyses using standard methods to establish botanical authentication and purity degree parameters for leaves and stem of this species in two forms: medicinal plant and herbal drug. We observed the size, shape, color, texture, fracture surface and transection characteristics, leaf venation patterns, and calluses are valuable diagnostic characters to identify the herbal drugs when they are not ground or powdered. Since medicinal plants and herbal drugs did not differ anatomically, the following key anatomical characters for P. callosum can be used for diagnostic purposes of both types raw plant materials: epicuticular wax and cuticular flanges patterns; collenchyma features; fibers in the midrib; arrangement pattern of the vascular bundles of the midrib and petiole; shape of the midrib, leaf margin, petiole, and stem; occurrence of raphides; and morphology of the starch grains. Acid lipids, essential oils, oleoresins, steroids, tannins and flavonoids were histochemically identified. Total ash (leaves: 11.25%; stem: 5.25%, sulphated ash (leaves: 68.02%; stem: 12.50%, acid-insoluble ash (leaves: 2.82%; stem: 0.27%, moisture (leaves: 8.60%; stem: 6.10%, loss on drying (leaves: 11.08%; stem: 8.58%, and pH (leaves: 5.57, stem: 5.28 values were determined. The order of analyzed metal levels in leaf and stem herbal drugs was Al > V > Cu > Mn > Cr > Ni. Similar levels of Cd and Co and low levels of Hg were found. The results obtained can be used as quality

MICROBIOLOGICAL ASSESSMENT OF MUSSELS (MYTILUS GALLOPROVINCIALIS FARMED AND COMMERCIALIZED IN CAMPANIA REGION

Directory of Open Access Journals (Sweden)

N. Costanzo

2011-01-01

Full Text Available Mytilus galloprovincialis is one of the most commonly consumed bivalve molluscs. Several samples of Mytilus galloprovincialis were collected from different sea farms or bought in retail shops and from irregular peddlers. Total Mesophilic and Psicrophilic Aerobic Bacteria, Enterobatteriacee, E. coli, Salmonella spp., Vibrio spp. and L. monocytogenes were researched following ISO methods and EU Regulations. In mussels taken from the farms the limits were higher than those established by EU Regulation 2073/2005 only in one sample for E.coli and one for Salmonella spp. The mussels bought in retail shops showed good results and no sample exceed the law limits. Only one sample collected from irregular peddlers showed high levels of E.coli.

Mould thermal monitoring: a window on the mould

Energy Technology Data Exchange (ETDEWEB)

Normanton, A.S.; Hewitt, P.N.; Hunter, N.S.; Scoones, D.; Harris, B.

2004-07-01

Corus R, D and T at Teesside Technology Centre has developed over a number of years a mould thermal monitoring (MTM) system based on an array of thermocouples in the mould copper plates. The system is installed on the Corus slab casters in the UK, on slab casters at Outokumpu (UK), Sidmar (Belgium) and Kosice (Slovakia) and, at the time of the 4th European Continuous Casting Conference, was also on the medium thickness slab caster at Tuscaloosa (USA), which was sold to Nucor in 2004. The MTM system was also under development on the thin slab caster at Trico (USA) before plant closure (subsequently bought by Nucor), and aspects are currently being developed on the Corus DSP (direct sheet plant) thin slab caster at IJmuiden (The Netherlands). While a prime function is detection and prevention of sticker type breakouts, the MTM system allows real time assessment of thermal conditions, provides a valuable input for online grading and, most important, enables modifications to mould powder practices to be assessed. The present paper briefly outlines recent developments to the MTM system and presents examples of the use of the system to assist mould powder developments. (author)

The concept of `work ability' from the view point of employers.

Science.gov (United States)

Jansson, Inger; Björklund, Anita; Perseius, Kent-Inge; Gunnarsson, A Birgitta

2015-01-01

Since work ability is manifested in working life and ``bought'' by employers, employers perceptions of the concept are important to understand. Studies have shown that people with health problems want to take part in the labour market, but experience difficulties in gaining access. Additionally, studies have demonstrated the doubt felt by employers when they consider hiring a person with a disability. The aim was to identify and characterise employers' conceptions of work ability. The study design was qualitative with a phenomenographic approach. Six male and six female employers from various workplaces and geographical areas in Sweden were interviewed. Three domains were identified: employees' contributions to work ability, employers' contributions to work ability and circumstances with limited work ability. Work ability was regarded as a tool in production and its output, production, was the main issue. The employees' commitment and interest could bridge other shortcomings. The employers highlighted their own contributions in shaping work ability in order to fit with work circumstances. Health problems were not the only limiting issues; other circumstances, such as individual characteristics and contextual factors, could limit work ability too. Knowing the importance of commitment and interest is valuable in work rehabilitation.

Anatomy education environment measurement inventory: A valid tool to measure the anatomy learning environment.

Science.gov (United States)

Hadie, Siti Nurma Hanim; Hassan, Asma'; Ismail, Zul Izhar Mohd; Asari, Mohd Asnizam; Khan, Aaijaz Ahmed; Kasim, Fazlina; Yusof, Nurul Aiman Mohd; Manan Sulong, Husnaida Abdul; Tg Muda, Tg Fatimah Murniwati; Arifin, Wan Nor; Yusoff, Muhamad Saiful Bahri

2017-09-01

Students' perceptions of the education environment influence their learning. Ever since the major medical curriculum reform, anatomy education has undergone several changes in terms of its curriculum, teaching modalities, learning resources, and assessment methods. By measuring students' perceptions concerning anatomy education environment, valuable information can be obtained to facilitate improvements in teaching and learning. Hence, it is important to use a valid inventory that specifically measures attributes of the anatomy education environment. In this study, a new 11-factor, 132-items Anatomy Education Environment Measurement Inventory (AEEMI) was developed using Delphi technique and was validated in a Malaysian public medical school. The inventory was found to have satisfactory content evidence (scale-level content validity index [total] = 0.646); good response process evidence (scale-level face validity index [total] = 0.867); and acceptable to high internal consistency, with the Raykov composite reliability estimates of the six factors are in the range of 0.604-0.876. The best fit model of the AEEMI is achieved with six domains and 25 items (X 2  = 415.67, P education environment in Malaysia. A concerted collaboration should be initiated toward developing a valid universal tool that, using the methods outlined in this study, measures the anatomy education environment across different institutions and countries. Anat Sci Educ 10: 423-432. © 2017 American Association of Anatomists. © 2017 American Association of Anatomists.

Internationalization Measures in Large Scale Research Projects

Science.gov (United States)

Soeding, Emanuel; Smith, Nancy

2017-04-01

Internationalization measures in Large Scale Research Projects Large scale research projects (LSRP) often serve as flagships used by universities or research institutions to demonstrate their performance and capability to stakeholders and other interested parties. As the global competition among universities for the recruitment of the brightest brains has increased, effective internationalization measures have become hot topics for universities and LSRP alike. Nevertheless, most projects and universities are challenged with little experience on how to conduct these measures and make internationalization an cost efficient and useful activity. Furthermore, those undertakings permanently have to be justified with the Project PIs as important, valuable tools to improve the capacity of the project and the research location. There are a variety of measures, suited to support universities in international recruitment. These include e.g. institutional partnerships, research marketing, a welcome culture, support for science mobility and an effective alumni strategy. These activities, although often conducted by different university entities, are interlocked and can be very powerful measures if interfaced in an effective way. On this poster we display a number of internationalization measures for various target groups, identify interfaces between project management, university administration, researchers and international partners to work together, exchange information and improve processes in order to be able to recruit, support and keep the brightest heads to your project.

A measurement of disorder in binary sequences

Science.gov (United States)

Gong, Longyan; Wang, Haihong; Cheng, Weiwen; Zhao, Shengmei

2015-03-01

We propose a complex quantity, AL, to characterize the degree of disorder of L-length binary symbolic sequences. As examples, we respectively apply it to typical random and deterministic sequences. One kind of random sequences is generated from a periodic binary sequence and the other is generated from the logistic map. The deterministic sequences are the Fibonacci and Thue-Morse sequences. In these analyzed sequences, we find that the modulus of AL, denoted by |AL | , is a (statistically) equivalent quantity to the Boltzmann entropy, the metric entropy, the conditional block entropy and/or other quantities, so it is a useful quantitative measure of disorder. It can be as a fruitful index to discern which sequence is more disordered. Moreover, there is one and only one value of |AL | for the overall disorder characteristics. It needs extremely low computational costs. It can be easily experimentally realized. From all these mentioned, we believe that the proposed measure of disorder is a valuable complement to existing ones in symbolic sequences.

Ice nucleating particles measured during the laboratory and field intercomparisons FIN-2 and FIN-3 by the diffusion chamber FRIDGE

Science.gov (United States)

Weber, Daniel; Schrod, Jann; Curtius, Joachim; Haunold, Werner; Thomson, Erik; Bingemer, Heinz

2016-04-01

The measurement of atmospheric ice nucleating particles (INP) is still challenging. In the absence of easily applicable INP standards the intercomparison of different methods during collaborative laboratory and field workshops is a valuable tool that can shine light on the performance of individual methods for the measurement of INP [1]. FIN-2 was conducted in March 2015 at the AIDA facility in Karlsruhe as an intercomparison of mobile instruments for measuring INP [2]. FIN-3 was a field campaign at the Desert Research Institutes Storm Peak Laboratory in Colorado in September 2015 [3]. The FRankfurt Ice nucleation Deposition freezinG Experiment (FRIDGE) participated in both experiments. FRIDGE measures ice nucleating particles by electrostatic precipitation of aerosol particles onto Si-wafers in a collection unit, followed by activation, growth, and optical detection of ice crystals on the substrate in an isostatic diffusion chamber [4,5]. We will present and discuss results of our measurements of deposition/condensation INP and of immersion INP with FRIDGE during FIN-2 and FIN-3. Acknowledgements: The valuable contributions of the FIN organizers and their institutions, and of the FIN Workshop Science team are gratefully acknowledged. Our work was supported by Deutsche Forschungsgemeinschaft (DFG) under the Research Unit FOR 1525 (INUIT) and the EU FP7-ENV- 2013 BACCHUS project under Grant Agreement 603445.

Dimensional measurement of micro-moulded parts by computed tomography

DEFF Research Database (Denmark)

Ontiveros, S.; Yagüe-Fabra, J.A.; Jiménez, R.

2012-01-01

Computed tomography (CT) is progressively assuming an important role in metrology applications and great efforts are being made in order to turn it into a reliable and standardized measuring technology. CT is typically used for non-destructive tests, but it is currently becoming very popular for ...... and the analysis of the results provide valuable conclusions about the advantages and drawbacks of using CT metrology in comparison with other measuring systems when these techniques are employed for the quality control of micro-moulded parts.......Computed tomography (CT) is progressively assuming an important role in metrology applications and great efforts are being made in order to turn it into a reliable and standardized measuring technology. CT is typically used for non-destructive tests, but it is currently becoming very popular...... for dimensional metrology applications due to its strategic advantages such as the capability of performing measurements on both the component's surface and volume, allowing inspection possibilities to otherwise non-accessible internal features. This paper focuses on the dimensional verification of two micro...

Consumers' price awareness at the point-of-selection

DEFF Research Database (Denmark)

Jensen, Birger Boutrup

This paper focuses on consumers' price information processing at the point-of-selection. Specifically, it updates past results of consumers' price awareness at the point-of-selection - applying both a price-recall and a price-recognition test - and tests hypotheses on potential determinants...... of consumers' price awareness at the point-of-selection. Both price-memory tests resulted in higher measured price awareness than in any of the past studies. Results also indicate that price recognition is not the most appropiate measure. Finally, a discriminant analysis shows that consumers who are aware...... of the price at the point-of-selection are more deal prone, more low-price prone, and bought a special-priced item. Implications are discussed....

Measuring Uranium Decay Rates for Advancement of Nuclear Forensics and Geochronology

Energy Technology Data Exchange (ETDEWEB)

Parsons-Davis, Tashi [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-10-31

Radioisotopic dating techniques are highly valuable tools for understanding the history of physical and chemical processes in materials related to planetary sciences and nuclear forensics, and rely on accurate knowledge of decay constants and their uncertainties. The decay constants of U-238 and U-235 are particularly important to Earth science, and often the measured values with lowest reported uncertainties are applied, although they have not been independently verified with similar precision. New direct measurements of the decay constants of U-238, Th-234, U-235, and U-234 were completed, using a range of analytical approaches. An overarching goal of the project was to ensure the quality of results, including metrological traceability to facilitate implementation across diverse disciplines. This report presents preliminary results of these experiments, as a few final measurements and calculations are still in progress.

Prices dip along with volume

International Nuclear Information System (INIS)

Anon.

1993-01-01

The summer doldrums took hold in July, with only eight deals taking place, four on the spot concentrates market, two in conversion and two in enrichment. Spot concentrates volume dropped by 23% to nearly 1.2 million lbs U308 equivalent, resulting in slight declines in NUKEM's restricted and unrestricted price ranges. There were four deals on the spot market in July, totaling nearly 1.2 million lbs U3O8 equivalent. One of the buyers, a US utility, bought low-enriched uranium containing up to 440,000 lbs equivalent. Two of the buyers, a European and a US utility, purchased nearly 580,000 lbs of concentrates, with most going to the European utility. And another US utility bought UF6 containing 149,000 lbs equivalent. As for new demand, four buyers - including the European and US utilities that bought concentrates, as well as an East European utility and a non-US producer - entered the market during the month seeking 1.4 million lbs equivalent. The latter two buyers, along with another European utility and another US utility, are now weighing offers for more than 2.2 million lbs U3O8 equivalent. Looking ahead, we anticipate that as many as 17 buyers may enter the market for nearly 5 million lbs equivalent

Monitoring network for doserate-measurements with wireless datatransmitting in Baden-Wuerttemberg

International Nuclear Information System (INIS)

Aures, R.; Wenzel, H.

2003-01-01

In the environment of the nuclear power plants Philippsburg, Obrigheim and Neckarwestheim in Baden-Wuerttemberg there is a monitoring network with 90 stations. They are measuring the gamma-dose rate. In the meantime these monitoring stations are nearly 20 years old and now it is time to substitute old technology by a new one. The aim is a mix of monitoring stations with phone wire- and wireless data transmission (Skylink). Thinkable is a part of 50 % of Skylink-tubes in the monitoring network and some for mobile performance. The main aspect of the planned substitution is a second independent way of data transmission. Normally there are no problems for data transmission. But in case of emergency the data transmissions which depends from phone wires could be delayed if there are too much dates. So the second way, the way of wireless data transmissions becomes important. The Landesanstalt fuer Umweltschutz in Karlsruhe has bought a complete system from the company Genitron in Frankfurt/Main. The system (Skylink) consists of the receiver and the does rate-monitoring stations. Such a system was tested successfully in a region with many mountains and deep valleys. Since July 2000 the Skylink-system is performed in the ''Nuclear power monitoring system'' (KFUe) in Baden-Wuerttemberg. The receiver is on the Koenigstuhl (630 m) near Heidelberg. This is a very good position to receive the wireless transmitted dates from every monitoring station (Skylink Gammatracer) of the monitoring network. Now there are 27 Skylink Gammatracer spread in the monitoring network. At time they are placed near the dose rate tubes of the old monitoring stations for comparing the dose rates and they are working with best results. (orig.)

Measuring brand loyalty in the pharmaceutical industry of South Africa / Hilde du Plooy

OpenAIRE

Du Plooy, Hilde

2012-01-01

Brands are recognised as one of the most valuable assets that a company can possess and therefore brands are key role-players in the business strategies of organisations. The rivalry amongst competitors in the pharmaceutical industry is fierce and companies should design their strategies in such a way in order to achieve competitive advantage. Brand loyalty is regarded as a powerful tool in the development of pharmaceutical brands. The main aim of this study was to measure b...

Measurements of pulmonary gas exchange efficiency using expired gas and oximetry: results in normal subjects.

Science.gov (United States)

West, John B; Wang, Daniel L; Prisk, G Kim

2018-04-01

We are developing a novel, noninvasive method for measuring the efficiency of pulmonary gas exchange in patients with lung disease. The patient wears an oximeter, and we measure the partial pressures of oxygen and carbon dioxide in inspired and expired gas using miniature analyzers. The arterial Po 2 is then calculated from the oximeter reading and the oxygen dissociation curve, using the end-tidal Pco 2 to allow for the Bohr effect. This calculation is only accurate when the oxygen saturation is ideal alveolar Po 2 minus the measured arterial Po 2 . That measurement requires an arterial blood sample. The present study suggests that this noninvasive procedure will be valuable in assessing the degree of impaired gas exchange in patients with lung disease.

New measurement capabilities of mass spectrometry in the nuclear fuel cycle

International Nuclear Information System (INIS)

Perrin, R.E.

1979-01-01

Three recent developments, when combined, have the potential for greatly improving accountability measurements in the nuclear fuel cycle. The techniques are particularly valuable when measuring the contents of vessels which are difficult to calibrate by weight or volume. Input dissolver accountability measurements, inparticular, benefit from the application of these techniques. Los Alamos Scientific Laboratory has developed the capability for isotopic analysis of U and Pu samples at the nanogram level with an accuracy of 0.1 relative %. The Central Bureau for Nuclear Materials Measurement in Geel, Belgium has developed the capability of preparing mixed, solid metal U and Pu spikes with an accuracy of better than 0.1 relative %. Idaho Nuclear Energy Laboratory and C.K. Mathews at Bhabha Atomic Research have demonstrated a technique for determining the ratio of sample size to total solution measured which is independent of both the weight and the volume of the solution being measured. The advantages and limitations of these techniques are discussed. An analytical scheme which takes advantage of the special features of these techniques is proposed. 4 refs

A decision-oriented measure of uncertainty importance for use in PSA

International Nuclear Information System (INIS)

Poern, Kurt

1997-01-01

For the interpretation of the results of probabilistic risk assessments it is important to have measures which identify the basic events that contribute most to the frequency of the top event but also to identify basic events that are the main contributors to the uncertainty in this frequency. Both types of measures, often called Importance Measure and Measure of Uncertainty Importance, respectively, have been the subject of interest for many researchers in the reliability field. The most frequent mode of uncertainty analysis in connection with probabilistic risk assessment has been to propagate the uncertainty of all model parameters up to an uncertainty distribution for the top event frequency. Various uncertainty importance measures have been proposed in order to point out the parameters that in some sense are the main contributors to the top event distribution. The new measure of uncertainty importance suggested here goes a step further in that it has been developed within a decision theory framework, thereby providing an indication of on what basic event it would be most valuable, from the decision-making point of view, to procure more information

The calculation, simulation, and measurement of longitudinal beam dynamics in electron injectors

International Nuclear Information System (INIS)

Dunham, B.; Liu, H.; Kazimi, R.

1997-01-01

Polarized electrons are a valuable commodity for nuclear physics research and every effort must be made to preserve them during transport Measurements of the beam emitted from the polarized source at the Thomas Jefferson National Accelerator Facility (Jefferson Lab) have shown a considerable bunch lengthening with increasing beam current. This lengthening leads to unacceptable loss as the beam passes through the injector chopping system. We present an application of the longitudinal envelope equation to describe the bunch lengthening and compare the results to measurements and simulations using PARMELA. In addition, a possible solution to the problem by adding a low power buncher to the beamline is described and initial results are shown

Effects of mixture and thinning in a tree farming valuable broadleaves plantation more than 20 years after the establishment.

Directory of Open Access Journals (Sweden)

Alessio Corazzesi

2010-12-01

Full Text Available The results of peduncolate Oak plantation trials where the Oak is mixed to wild Cherry and narrow-leaf Ash per line and per close mixture with different proportions (25% and 50% of N-fixing species (Black Locust and Italian Alder are described in the paper. The plantation, carried out in winter 1988-89, was framed into a reafforestation plan for spoil banks restoration. On a share of the plantation area, free thinnings foreseeing the release of about 70 target trees per hectare, were undertaken in 2001 and 2003; 21% and 27% of basal area were removed, respectively. In the latter trial, the crowns of target trees were completely isolated by felling all the surrounding trees. The performances of valuable timber broadleaves, the effects of intercropping and thinning on the growth of Oak target trees were analysed. Three inventories (2001, 2004 and 2008 and the annual monitoring of target trees growth were performed at the purpose. The two peduncolate Oak and narrow-leaf Ash trees showed the best performances among the set of valuable broadleaves, whilst wild cherry resulted not suited to local site conditions. A higher tree mortality occurred in the mixture with Black Locust. The mixture with both Nfixing species provided a stimulus to the Oak growth both in terms of dbh and tree height. Italian Alder resulted anyway less competitive and easy to manage, considering its progressive self-thinning, while Black Locust was aggressive enough to necessitate the control of its development by pollarding 7 years after the plantation. In the thinned plots, target trees showed significant diameter increments in comparison with control plots; maintaining year by year constant dbh increments of about 1 cm and crown’s diameter increment of about 50 cm. Intercropping with Italian Alder showed to be more effective than thinning on growth of the target trees. st1\\:*{behavior:url(#ieooui } /* Style Definitions */ table.MsoNormalTable {mso

Instrument to measure psychological contract violation in pharmacy students.

Science.gov (United States)

Spies, Alan R; Wilkin, Noel E; Bentley, John P; Bouldin, Alicia S; Wilson, Marvin C; Holmes, Erin R

2010-08-10

To adapt and evaluate an instrument that measures perceived psychological contract violations in pharmacy students by schools and colleges of pharmacy. A psychological contract violations measure was developed from existing literature and the 1997 ACPE Guidelines and pilot-tested with second-year pharmacy students at 2 schools of pharmacy. A revised measure then was administered to second-year pharmacy students at 6 schools of pharmacy. Using a 5-point Likert-type scale, participants were asked to indicate the level of obligations they received compared to what was promised by the school of pharmacy. Exploratory factor analysis on the psychological contract violations measure was conducted using principal components analysis resulting in 7 factors, which led to a revised measure with 26 items. Using a sample of 339 students, the proposed 7-factor measurement model was tested using confirmatory factor analysis. In general, the results supported the hypothesized model. The final 23-item scale demonstrated both reliability and validity. Some students perceived certain aspects of the psychological contract that exists with their school of pharmacy were being violated. The psychological contract violations measure may serve as a valuable tool in helping to identify areas where their students believe that schools/colleges of pharmacy have not fulfilled promised obligations.

Antenna Characterization for the JOLT Impulsive Radiator via Low-Voltage Measurements

Science.gov (United States)

Tyo, J. S.; Schoenberg, J. S. H.; Baum, C. E.; Prather, W. D.; Hackett, R.; Burger, J. W.; Farr, E. G.; Giri, D. V.; McLemore, D. P.

The JOLT system is a highly directive, impulse-like radiator. The antenna for JOLT is a 10-ft-diameter half-impulse radiating antenna (HIRA). JOLT was one of the first impulse radiating systems to employ a half IRA. For that reason, extensive measurements were made with a prototype, scale model HIRA in order to understand the performance of this class of antenna. In addition, a series of low-voltage antenna subsystem tests were performed with the full JOLT antenna before it was couple to the pulsed power and run at high voltage. The low-voltage measurements proved to be quite valuable, as an important manufacturing defect—a failure to mount the dish perpendicular to the ground plane—was identified and mitigated.

A sound and efficient measure of joint congruence.

Science.gov (United States)

Conconi, Michele; Castelli, Vincenzo Parenti

2014-09-01

In the medical world, the term "congruence" is used to describe by visual inspection how the articular surfaces mate each other, evaluating the joint capability to distribute an applied load from a purely geometrical perspective. Congruence is commonly employed for assessing articular physiology and for the comparison between normal and pathological states. A measure of it would thus represent a valuable clinical tool. Several approaches for the quantification of joint congruence have been proposed in the biomechanical literature, differing on how the articular contact is modeled. This makes it difficult to compare different measures. In particular, in previous articles a congruence measure has been presented which proved to be efficient and suitable for the clinical practice, but it was still empirically defined. This article aims at providing a sound theoretical support to this congruence measure by means of the Winkler elastic foundation contact model which, with respect to others, has the advantage to hold also for highly conforming surfaces as most of the human articulations are. First, the geometrical relation between the applied load and the resulting peak of pressure is analytically derived from the elastic foundation contact model, providing a theoretically sound approach to the definition of a congruence measure. Then, the capability of congruence measure to capture the same geometrical relation is shown. Finally, the reliability of congruence measure is discussed. © IMechE 2014.

Level and Contamination Assessment of Soil along an Expressway in an Ecologically Valuable Area in Central Poland

Directory of Open Access Journals (Sweden)

Maja Radziemska

2015-10-01

Full Text Available Express roads are a potential source of heavy metal contamination in the surrounding environment. The Warsaw Expressway (E30 is one of the busiest roads in the capital of Poland and cuts through the ecologically valuable area (Mazowiecki Natural Landscape Park. Soil samples were collected at distances of 0.5, 4.5 and 25 m from the expressway. The concentrations of cadmium (Cd, copper (Cu, nickel (Ni, lead (Pb, and zinc (Zn were determined in the soils by the flame atomic absorption spectrometry method (FAAS. Soils located in the direct proximity of the analyzed stretch of road were found to have the highest values of pH and electrical conductivity (EC, which decreased along with an increase in the distance from the expressway. The contents of Cd, Cu and Zn were found to be higher than Polish national averages, whereas the average values of Ni and Pb were not exceeded. The pollution level was estimated based on the geo-accumulation index (Igeo, and the pollution index (PI. The results of Igeo and PI indexes revealed the following orders: Cu < Zn < Ni < Cd < Pb and Cu < Ni < Cd < Zn < Pb, and comparison with geochemical background values showed higher concentration of zinc, lead and cadmium.

Practical and theoretical basis for performing redox-measurements in compacted bentonite. A literature survey

International Nuclear Information System (INIS)

Carlsson, T.; Muurinen, A.

2008-12-01

This report reviews the state-of-the-art with regard to redox measurements, especially in compacted water saturated bentonite, but also in natural systems like sediments and ground waters. Both theoretical and practical aspects of redox measurements are discussed, as well as some basic concepts like terminal electron-accepting processes (TEAPs) and oxidative capacity (OXC). The problems associated with the interpretation of measured electrode potentials are treated. Despite many practical and theoretical difficulties, redox measurements continue to be carried out by researchers all over the world. The over-all conclusion from the literature survey is that fruitful redox-measurements can be performed in compacted bentonite. Irrespective of whether the measured redox potentials are absolute or not, the use of electrodes provide a valuable tool for studying, e.g., long-term changes in the pore water of compacted bentonite and/or the diffusion of oxygen into a bentonite. (orig.)

Super-symmetric informationally complete measurements

Energy Technology Data Exchange (ETDEWEB)

Zhu, Huangjun, E-mail: hzhu@pitp.ca

2015-11-15

Symmetric informationally complete measurements (SICs in short) are highly symmetric structures in the Hilbert space. They possess many nice properties which render them an ideal candidate for fiducial measurements. The symmetry of SICs is intimately connected with the geometry of the quantum state space and also has profound implications for foundational studies. Here we explore those SICs that are most symmetric according to a natural criterion and show that all of them are covariant with respect to the Heisenberg–Weyl groups, which are characterized by the discrete analog of the canonical commutation relation. Moreover, their symmetry groups are subgroups of the Clifford groups. In particular, we prove that the SIC in dimension 2, the Hesse SIC in dimension 3, and the set of Hoggar lines in dimension 8 are the only three SICs up to unitary equivalence whose symmetry groups act transitively on pairs of SIC projectors. Our work not only provides valuable insight about SICs, Heisenberg–Weyl groups, and Clifford groups, but also offers a new approach and perspective for studying many other discrete symmetric structures behind finite state quantum mechanics, such as mutually unbiased bases and discrete Wigner functions.

Authentic, Original, and Valuable

DEFF Research Database (Denmark)

Tupasela, Aaro Mikael; Tamminen, Sakari

2015-01-01

The idea of genetic authenticity and origin has been an important issue within genetics for decades for scientific, political, and economic reasons. The question of where species and populations come from, as well as the linking of genetic traits to particular geographical locations, has resurfaced....... Using the case of human and non-human genetics to compare and contrast the various facets associated with genetic identity, we seek to develop a broader picture of the ways in which genetics plays an important role in stabilizing categories of origin....

Stop wasting valuable time.

Science.gov (United States)

Mankins, Michael C

2004-09-01

Companies routinely squander their most precious resource--the time of their top executives. In the typical company, senior executives meet to discuss strategy for only three hours a month. And that time is poorly spent in diffuse discussions never even meant to result in any decision. The price of misused executive time is high. Delayed strategic decisions lead to overlooked waste and high costs, harmful cost reductions, missed new product and business development opportunities, and poor long-term investments. But a few deceptively simple changes in the way top management teams set agendas and structure team meetings can make an enormous difference in their effectiveness. Efficient companies use seven techniques to make the most of the time their top executives spend together. They keep strategy meetings separate from meetings focused on operations. They explore issues through written communications before they meet, so that meeting time is used solely for reaching decisions. In setting agendas, they rank the importance of each item according to its potential to create value for the company. They seek to get issues not only on, but also off, the agenda quickly, keeping to a clear implementation timetable. They make sure they have considered all viable alternatives before deciding a course of action. They use a common language and methodology for reaching decisions. And they insist that, once a decision is made, they stick to it--that there be no more debate or mere grudging compliance. Once leadership teams get the basics right, they can make more fundamental changes in the way they work together. Strategy making can be transformed from a series of fragmented and unproductive events into a streamlined, effective, and continuing management dialogue. In companies that have done this, management meetings aren't a necessary evil; they're a source of real competitive advantage.

International Conference Automation : Challenges in Automation, Robotics and Measurement Techniques

CERN Document Server

Zieliński, Cezary; Kaliczyńska, Małgorzata

2016-01-01

This book presents the set of papers accepted for presentation at the International Conference Automation, held in Warsaw, 2-4 March of 2016. It presents the research results presented by top experts in the fields of industrial automation, control, robotics and measurement techniques. Each chapter presents a thorough analysis of a specific technical problem which is usually followed by numerical analysis, simulation, and description of results of implementation of the solution of a real world problem. The presented theoretical results, practical solutions and guidelines will be valuable for both researchers working in the area of engineering sciences and for practitioners solving industrial problems. .

Present and perspective roles of soft X-ray tomography in tokamak plasma position measurements

International Nuclear Information System (INIS)

Mlynar, J.; Duval, B.P.; Horacek, J.; Lister, J.B.

2003-01-01

This paper shows the importance and feasibility of real-time tomography in fusion experiments for the example of soft X-ray (SXR) position measurements. The requirement of non-magnetic real-time diagnostics in low frequencies for ITER is discussed. This is illustrated by recent results of rapid tomographic inversion of SXR measurements on tokamak TCV. Comparison with the magnetic reconstruction data has not only shown the valuable resolution capabilities of both techniques, but also revealed a slight dependence of magnetic measurements on toroidal magnetic field and an unnoticed drift of plasma position observer. A feasibility study using current hardware capacities for programmable real-time tomographic system with plasma position feedback output was carried out. A compact solution is found to be tractable opening wide perspectives for development

Attosecond physics attosecond measurements and control of physical systems

CERN Document Server

Torres, Ricardo; Zaïr, Amelle

2013-01-01

Attophysics is an emerging field in physics devoted to the study and characterization of matter dynamics in the sub-femtosecond time scale. This book gives coverage of a broad set of selected topics in this field, exciting by their novelty and their potential impact. The book is written review-like. It also includes fundamental chapters as introduction to the field for non-specialist physicists. The book is structured in four sections: basics, attosecond pulse technology, applications to measurements and control of physical processes and future perspectives. It is a valuable reference tool for researchers in the field as well as a concise introduction to non-specialist readers.

AATSR: global-change and surface-temperature measurements from Envisat

Science.gov (United States)

Llewellyn-Jones, D.; Edwards, M. C.; Mutlow, C. T.; Birks, A. R.; Barton, I. J.; Tait, H.

2001-02-01

The Advanced Along-Track Scanning Radiometer (AATSR) onboard ESA's Envisat spacecraft is designed to meet the challenging task of monitoring and detecting climate change. It builds on the success of its predecessor instruments on the ERS-1 and ERS-2 satellites, and will lead to a 15+ year record of precise and accurate global Sea-Surface Temperature (SST) measurements, thereby making a valuable contribution to the long-term climate record. With its high-accuracy, high-quality imagery and channels in the visible, near-infrared and thermal wavelengths, AATSR data will support many applications in addition to oceanographic and climate research, including a wide range of land-surface, cryosphere and atmospheric studies.

Information measures for terrain visualization

Science.gov (United States)

Bonaventura, Xavier; Sima, Aleksandra A.; Feixas, Miquel; Buckley, Simon J.; Sbert, Mateu; Howell, John A.

2017-02-01

Many quantitative and qualitative studies in geoscience research are based on digital elevation models (DEMs) and 3D surfaces to aid understanding of natural and anthropogenically-influenced topography. As well as their quantitative uses, the visual representation of DEMs can add valuable information for identifying and interpreting topographic features. However, choice of viewpoints and rendering styles may not always be intuitive, especially when terrain data are augmented with digital image texture. In this paper, an information-theoretic framework for object understanding is applied to terrain visualization and terrain view selection. From a visibility channel between a set of viewpoints and the component polygons of a 3D terrain model, we obtain three polygonal information measures. These measures are used to visualize the information associated with each polygon of the terrain model. In order to enhance the perception of the terrain's shape, we explore the effect of combining the calculated information measures with the supplementary digital image texture. From polygonal information, we also introduce a method to select a set of representative views of the terrain model. Finally, we evaluate the behaviour of the proposed techniques using example datasets. A publicly available framework for both the visualization and the view selection of a terrain has been created in order to provide the possibility to analyse any terrain model.

Potentials of raw and cooked walnuts (Tetracapidium conophorum) as sources of valuable nutrients for good health.

Science.gov (United States)

Moyib, O K; Falegbe, O; Moyib, F R

2015-12-01

The present study estimated nutrient composition of walnuts before and after cooking with respect to its potential as valuable source of nutrients for daily intake. Walnut fruits were purchased from five different markets in Ijebu-Ode local government area and its environs. The fruits samples were divided into two portions, labelled R (for raw) and C (cooked). The C samples were cooked at 100 degrees C for 1 hr and allowed to cool to room temperature. The seeds of both C and R samples were ground and analyzed for proximate, macro and micro minerals using methods of Association of Official Chemists. The results obtained showed that both raw and cooked walnuts are rich in fat, iron (Fe), manganese (Mn), and copper (Cu) in amounts that are within daily recommended intake per 100 g of walnut seeds. They also contained appreciable levels of protein, phosphorus (P), calcium (Ca), and magnesium (Mg) but with low content of moisture (MC), carbohydrate, fiber, sodium (Na) and potassium (K). Boiling significantly affected the levels of protein, carbohydrate, ash, moisture content, fat, nitrogen, calcium, sodium, copper, zinc, phosphorus, potassium, manganese and iron The study reveals that walnut is nutritious due to its appreciable level of protein and presence of various essential and macro minerals. Its low content of sodium and potassium is beneficiary in hypertensive condition as snack. The study suggests future bio-fortification of walnut with zinc, which may bring about a co-increase in Ca and protein content.

Delayed parenchymal transit during Tc-99m MAG3 renography is a valuable sign in diagnosing urinary obstruction in patients with early hydronephrosis

Energy Technology Data Exchange (ETDEWEB)

Lee, Won Woo; Moon, Dae Hyuk; Kim, Jae Seung; Ryu, Jin Sook; Lee, Hee Kyung [Ulsan University College of Medicine, Seoul (Korea, Republic of)

2002-10-01

Diuretic renography (DR) can be false negative with upper urinary tract obstruction due to low compliance of the renal pelvis. Delayed parenchymal transit (DPT) may be a valuable sign in case of false negative DR. We compared the diagnostic values of DR and DPT during Tc-99m MAG3 diuretic scan in adults with suspected unilateral obstructive uropathy. Fifty-four patients (male:female=30:24, age: 40.7{+-}15.5 yrs) who underwent Tc-99m MAG3 diuretic scan due to suspicious unilateral obstructive uropathy were analyzed. DR with a T{sub 1/2} of > 15 min was considered as positive for obstruction. DPT was considered to be present when there was delayed appearance of radioactivity in the renal pelvis and prolonged retention of radioactivity in the renal pelvis and prolonged retention of radioactivity in the renal parenchyma. The renal area ratio was defined as the ratio of pixel number of hydronephrotic after intervention, or aggravated hydronephrosis without intervention. Non-obstruction was defined as unchanged hydronephrosis over 6 months. Twenty-six renal units had obstruction and 28 no obstruction. The sensitivities of DR and DPT were 69% (18/26) and 50% (13/26) respectively. Two renal units with DPT but negative DR showed DPT had lower renal area ratio than 7 renal units without DPT (0.97{+-}0.20 vs 1.30{+-}0.41, p<0.05). Differential renal function was not significantly different between these groups. DPT correctly diagnosed all renal units with non-obstruction (specificity 100%), while the specificity of DR was 89% (25/28). DPT during Tc-99m MAG3 diuretic scan may be a valuable sign in diagnosing urinary obstruction especially in patients with false negative DR and early HN.

Delayed parenchymal transit during Tc-99m MAG3 renography is a valuable sign in diagnosing urinary obstruction in patients with early hydronephrosis

International Nuclear Information System (INIS)

Lee, Won Woo; Moon, Dae Hyuk; Kim, Jae Seung; Ryu, Jin Sook; Lee, Hee Kyung

2002-01-01

Diuretic renography (DR) can be false negative with upper urinary tract obstruction due to low compliance of the renal pelvis. Delayed parenchymal transit (DPT) may be a valuable sign in case of false negative DR. We compared the diagnostic values of DR and DPT during Tc-99m MAG3 diuretic scan in adults with suspected unilateral obstructive uropathy. Fifty-four patients (male:female=30:24, age: 40.7±15.5 yrs) who underwent Tc-99m MAG3 diuretic scan due to suspicious unilateral obstructive uropathy were analyzed. DR with a T 1/2 of > 15 min was considered as positive for obstruction. DPT was considered to be present when there was delayed appearance of radioactivity in the renal pelvis and prolonged retention of radioactivity in the renal pelvis and prolonged retention of radioactivity in the renal parenchyma. The renal area ratio was defined as the ratio of pixel number of hydronephrotic after intervention, or aggravated hydronephrosis without intervention. Non-obstruction was defined as unchanged hydronephrosis over 6 months. Twenty-six renal units had obstruction and 28 no obstruction. The sensitivities of DR and DPT were 69% (18/26) and 50% (13/26) respectively. Two renal units with DPT but negative DR showed DPT had lower renal area ratio than 7 renal units without DPT (0.97±0.20 vs 1.30±0.41, p<0.05). Differential renal function was not significantly different between these groups. DPT correctly diagnosed all renal units with non-obstruction (specificity 100%), while the specificity of DR was 89% (25/28). DPT during Tc-99m MAG3 diuretic scan may be a valuable sign in diagnosing urinary obstruction especially in patients with false negative DR and early HN

郑人买履(英文)

Institute of Scientific and Technical Information of China (English)

无

2001-01-01

To be like the man from Zheng who bought shoes. (To believe only in dogmas and ignore the objective reality). A man from the State of Zheng was going to the market to buy himself a pair of shoes.Before he left home, he measured his feet with a piece of string. He cut the sting to match the size of his foot. Then he got dressed and set off for the market. It was quite a long walk, and by the time he arrived, it was almost noon. He wasted no time in shopping for

Hotspot electron temperature from x-ray continuum measurements on the NIF

International Nuclear Information System (INIS)

Jarrott, L. C.; Benedetti, L. R.; Chen, H.; Izumi, N.; Khan, S. F.; Ma, T.; Nagel, S. R.; Landen, O. L.; Pak, A.; Patel, P. K.; Schneider, M.; Scott, H. A.

2016-01-01

We report on measurements of the electron temperature in the hotspot of inertially confined, layered, spherical implosions on the National Ignition Facility using a differential filtering diagnostic. Measurements of the DT and DD ion temperatures using neutron time-of-flight detectors are complicated by the contribution of hot spot motion to the peak width, which produce an apparent temperature higher than the thermal temperature. The electron temperature is not sensitive to this non-thermal velocity and is thus a valuable input to interpreting the stagnated hot spot conditions. Here we show that the current differential filtering diagnostic provides insufficient temperature resolution for the hot spot temperatures of interest. We then propose a new differential filter configuration utilizing larger pinhole size to increase spectral fluence, as well as thicker filtration. This new configuration will improve measurement uncertainty by more than a factor of three, allowing for a more accurate hotspot temperature.

Hotspot electron temperature from x-ray continuum measurements on the NIF

Science.gov (United States)

Jarrott, L. C.; Benedetti, L. R.; Chen, H.; Izumi, N.; Khan, S. F.; Ma, T.; Nagel, S. R.; Landen, O. L.; Pak, A.; Patel, P. K.; Schneider, M.; Scott, H. A.

2016-11-01

We report on measurements of the electron temperature in the hotspot of inertially confined, layered, spherical implosions on the National Ignition Facility using a differential filtering diagnostic. Measurements of the DT and DD ion temperatures using neutron time-of-flight detectors are complicated by the contribution of hot spot motion to the peak width, which produce an apparent temperature higher than the thermal temperature. The electron temperature is not sensitive to this non-thermal velocity and is thus a valuable input to interpreting the stagnated hot spot conditions. Here we show that the current differential filtering diagnostic provides insufficient temperature resolution for the hot spot temperatures of interest. We then propose a new differential filter configuration utilizing larger pinhole size to increase spectral fluence, as well as thicker filtration. This new configuration will improve measurement uncertainty by more than a factor of three, allowing for a more accurate hotspot temperature.

Hotspot electron temperature from x-ray continuum measurements on the NIF.

Science.gov (United States)

Jarrott, L C; Benedetti, L R; Chen, H; Izumi, N; Khan, S F; Ma, T; Nagel, S R; Landen, O L; Pak, A; Patel, P K; Schneider, M; Scott, H A

2016-11-01

We report on measurements of the electron temperature in the hotspot of inertially confined, layered, spherical implosions on the National Ignition Facility using a differential filtering diagnostic. Measurements of the DT and DD ion temperatures using neutron time-of-flight detectors are complicated by the contribution of hot spot motion to the peak width, which produce an apparent temperature higher than the thermal temperature. The electron temperature is not sensitive to this non-thermal velocity and is thus a valuable input to interpreting the stagnated hot spot conditions. Here we show that the current differential filtering diagnostic provides insufficient temperature resolution for the hot spot temperatures of interest. We then propose a new differential filter configuration utilizing larger pinhole size to increase spectral fluence, as well as thicker filtration. This new configuration will improve measurement uncertainty by more than a factor of three, allowing for a more accurate hotspot temperature.

Hotspot electron temperature from x-ray continuum measurements on the NIF

Energy Technology Data Exchange (ETDEWEB)

Jarrott, L. C., E-mail: jarrott1@llnl.gov; Benedetti, L. R.; Chen, H.; Izumi, N.; Khan, S. F.; Ma, T.; Nagel, S. R.; Landen, O. L.; Pak, A.; Patel, P. K.; Schneider, M.; Scott, H. A. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States)

2016-11-15

We report on measurements of the electron temperature in the hotspot of inertially confined, layered, spherical implosions on the National Ignition Facility using a differential filtering diagnostic. Measurements of the DT and DD ion temperatures using neutron time-of-flight detectors are complicated by the contribution of hot spot motion to the peak width, which produce an apparent temperature higher than the thermal temperature. The electron temperature is not sensitive to this non-thermal velocity and is thus a valuable input to interpreting the stagnated hot spot conditions. Here we show that the current differential filtering diagnostic provides insufficient temperature resolution for the hot spot temperatures of interest. We then propose a new differential filter configuration utilizing larger pinhole size to increase spectral fluence, as well as thicker filtration. This new configuration will improve measurement uncertainty by more than a factor of three, allowing for a more accurate hotspot temperature.

Nanosensors for label-free measurement of sodium ion fluxes of neuronal cells

Energy Technology Data Exchange (ETDEWEB)

Gebinoga, Michael, E-mail: michael.gebinoga@tu-ilmenau.de [ZIK MacroNano Microfluidics and Biosensors, Technical University Ilmenau, P.O. Box 100565, D-98684 Ilmenau (Germany); Silveira, Liele; Cimalla, Irina [ZIK MacroNano Microfluidics and Biosensors, Technical University Ilmenau, P.O. Box 100565, D-98684 Ilmenau (Germany); Dumitrescu, Andreea [University of Pennsylvania - School of Engineering and Applied Science, Philadelphia, PA 19104-6391 (United States); Kittler, Mario; Luebbers, Benedikt; Becker, Annette [ZIK MacroNano Microfluidics and Biosensors, Technical University Ilmenau, P.O. Box 100565, D-98684 Ilmenau (Germany); Lebedev, Vadim [Fraunhofer Institute for Solid State Physics, Tullastr. 7, D-79108 Freiburg (Germany); Schober, Andreas [ZIK MacroNano Microfluidics and Biosensors, Technical University Ilmenau, P.O. Box 100565, D-98684 Ilmenau (Germany)

2010-05-25

Novel nanosensors based on aluminium gallium nitrides (AlGaN/GaN) high electron mobility transistors have been of high interest during the last years, especially for their electrical characteristics as open gate field effect transistors. These nanosensors provide a valuable tool for high content screening in drug discovery, cell monitoring and liquid analyses focusing on applications of electrochemical detection technology. Our own measurements with these sensors confirm their pH sensitivity and in addition the possibility of detection of other ions in aqueous media. These measurements deal with the reactions of NG 108-15 (mouse neuroblastoma x rat glioma hybrid) neuronal cells in response to different acetylcholinesterase inhibitors. Our experimental approach shows some advantages. The first advantage is the label-free measurement of ion fluxes, and another advantage is the possibility non-destructively to estimate cell signals.

Nanosensors for label-free measurement of sodium ion fluxes of neuronal cells

International Nuclear Information System (INIS)

Gebinoga, Michael; Silveira, Liele; Cimalla, Irina; Dumitrescu, Andreea; Kittler, Mario; Luebbers, Benedikt; Becker, Annette; Lebedev, Vadim; Schober, Andreas

2010-01-01

Novel nanosensors based on aluminium gallium nitrides (AlGaN/GaN) high electron mobility transistors have been of high interest during the last years, especially for their electrical characteristics as open gate field effect transistors. These nanosensors provide a valuable tool for high content screening in drug discovery, cell monitoring and liquid analyses focusing on applications of electrochemical detection technology. Our own measurements with these sensors confirm their pH sensitivity and in addition the possibility of detection of other ions in aqueous media. These measurements deal with the reactions of NG 108-15 (mouse neuroblastoma x rat glioma hybrid) neuronal cells in response to different acetylcholinesterase inhibitors. Our experimental approach shows some advantages. The first advantage is the label-free measurement of ion fluxes, and another advantage is the possibility non-destructively to estimate cell signals.

Winter maintenance performance measure.

Science.gov (United States)

2016-01-01

The Winter Performance Index is a method of quantifying winter storm events and the DOTs response to them. : It is a valuable tool for evaluating the States maintenance practices, performing post-storm analysis, training : maintenance personnel...

AHP 47: UNCLE STON PA VISITS XI'AN

Directory of Open Access Journals (Sweden)

Sangs rgyas bkra shis སངས་རྒྱས་བཀྲ་ཤིས།

2017-04-01

Full Text Available Uncle Ston pa heard people talking about monks from his home community who visited such big cities as Beijing and Shanghai where they met many rich Chinese. They made a lot of money and then bought expensive cars and houses when they got back home. Uncle Ston pa thought about it and then decided to go to Zi ling by bus. When he arrived, he went to a store and bought an outfit of monk's clothes. By this time, he was very hungry and went to the area near the train station where many Tibetans operated businesses. He met a man he knew and said, "Hello! What are you doing here? Such a lucky coincidence to meet you here!"

Carbon footprint of SURFnet 2011

Energy Technology Data Exchange (ETDEWEB)

Meulenhoff, P.J.; Jansen, B.I.

2012-05-15

SURFnet wants to account for its energy consumption in a way that it can compare itself to other National Research and Education Networks (NRENs) in Europe. To that end, an assessment was held to account for the Greenhouse Gas (GHG) emission in 2011, according to the ISO 14064:2006 part 1 standard. SURFnet starting reporting on GHG emissions in 2010. The quantitative assessment is limited to Scope 1 (direct emissions) and Scope 2 (indirect emissions related to bought energy) and certain parts of Scope 3 emissions (e.g. emissions related to the production of bought products, travel, waste). The total GHG emission under Scope 1, Scope 2, and Scope 3 accounted for by SURFnet in 2011 is equal 1278 ton CO2-eq.

Effect of subliminal stimuli on consumer behavior: negative evidence.

Science.gov (United States)

George, S G; Jennings, L B

1975-12-01

The study corrected methodological weaknesses found in previous experiments designed to test the contentions of motivational research theorists that subliminal stimulation can affect buying behavior. The words "Hershey's Chocolate" were presented to a group of 18 experimental Ss below a forced-choice detection threshold. The 19 control Ss had a blank slide superimposed over the same background media. In a highly controlled buying situation neither experimental nor control Ss purchased Hershey's products, but on comparable chocolate products, the experimental Ss bought 5 and the control Ss, 3. A second study tested 15 experimental and 12 control Ss with the stimulus presented just below a recognition threshold. No experimental Ss bought Hershey's; two control Ss did. No support was found for the claims of motivational research theorists.

Introduction to metabolic genetic engineering for the production of valuable secondary metabolites in in vivo and in vitro plant systems.

Science.gov (United States)

Benedito, Vagner A; Modolo, Luzia V

2014-01-01

Plants are capable of producing a myriad of chemical compounds. While these compounds serve specific functions in the plant, many have surprising effects on the human body, often with positive action against diseases. These compounds are often difficult to synthesize ex vivo and require the coordinated and compartmentalized action of enzymes in living organisms. However, the amounts produced in whole plants are often small and restricted to single tissues of the plant or even cellular organelles, making their extraction an expensive process. Since most natural products used in therapeutics are specialized, secondary plant metabolites, we provide here an overview of the classification of the main classes of these compounds, with its biochemical pathways and how this information can be used to create efficient in and ex planta production pipelines to generate highly valuable compounds. Metabolic genetic engineering is introduced in light of physiological and genetic methods to enhance production of high-value plant secondary metabolites.

Being a valuable contributor on the frontline: The self-perception of staff in group homes for people with intellectual disability.

Science.gov (United States)

Quilliam, Claire; Bigby, Christine; Douglas, Jacinta

2018-05-01

Group home frontline staff have a critical role in implementing service policies, yet research typically examines implementation issues from an organisational perspective. The aim of this study was to explore the self-perception of frontline staff about their role in group homes for people with intellectual disability. Constructivist grounded theory methodology guided the study. Data were collected with frontline staff through semistructured interviews and participant observations. Coding and sorting methods were used to analyse participants' self-perception. Frontline staff felt they were valuable contributors who knew the service setting and residents well. Despite this staff felt powerless in their roles, excluded from organisational dialogue, stressed and exhausted. Frontline staff have critical insight into service implementation although disability service organisations may limit their capacity to contribute to this. Further action could explore new ways to better nurture frontline staff engagement in organisational dialogue. © 2017 The Authors Journal of Applied Research in Intellectual Disabilities Published by John Wiley & Sons Ltd.

Arterial Stiffness in Children: Pediatric Measurement and Considerations

Science.gov (United States)

Savant, Jonathan D.; Furth, Susan L.; Meyers, Kevin E.C.

2014-01-01

Background Arterial stiffness is a natural consequence of aging, accelerated in certain chronic conditions, and predictive of cardiovascular events in adults. Emerging research suggests the importance of arterial stiffness in pediatric populations. Methods There are different indices of arterial stiffness. The present manuscript focuses on carotid-femoral pulse wave velocity and pulse wave analysis, although other methodologies are discussed. Also reviewed are specific measurement considerations for pediatric populations and the literature describing arterial stiffness in children with certain chronic conditions (primary hypertension, obesity, diabetes, chronic kidney disease, hypercholesterolemia, genetic syndromes involving vasculopathy, and solid organ transplant recipients). Conclusions The measurement of arterial stiffness in children is feasible and, under controlled conditions, can give accurate information about the underlying state of the arteries. This potentially adds valuable information about the functionality of the cardiovascular system in children with a variety of chronic diseases well beyond that of the brachial artery blood pressure. PMID:26587447

Measurements of the {gamma}*p {yields} {Delta} reaction at low Q{sup 2}

Energy Technology Data Exchange (ETDEWEB)

Sparveris, N. [Temple University, Department of Physics, Philadelphia, Pennsylvania (United States); Stave, S.; Bernstein, A.M. [Massachusetts Institute of Technology, Department of Physics, Laboratory for Nuclear Science and Bates Linear Accelerator Center, Cambridge, Massachusetts (United States); Achenbach, P.; Ayerbe Gayoso, C.; Baumann, D.; Bernauer, J.; Boehm, R.; Botto, T.; Ding, M.; Distler, M.O.; Doria, L.; Friedrich, J.; Merkel, H.; Mueller, U.; Neuhausen, R.; Nungesser, L.; Piegsa, A.; Pochodzalla, J.; Seimetz, M.; Walcher, T.; Weis, M. [Johannes Gutenberg-Universitaet Mainz, Institut fuer Kernphysik, Mainz (Germany); Bosnar, D.; Makek, M. [University of Zagreb, Department of Physics, Zagreb (Croatia); Christopoulou, A.; Karabarbounis, A.; Papanicolas, C.N.; Stiliaris, S. [University of Athens, Institute of Accelerating Systems and Applications and Department of Physics, Athens (Greece); Dale, D. [University of Kentucky, Department of Physics and Astronomy, Lexington, Kentucky (United States); Nakagawa, I. [Radiation Laboratory, Saitama (Japan); Potokar, M.; Sirca, S. [University of Ljubljana, Institute Jozef Stefan, Ljubljana (Slovenia)

2013-10-15

We report new p(e, e'p){pi} measurements in the {Delta} {sup +}(1232) resonance at the low momentum transfer region utilizing the magnetic spectrometers of the A1 Collaboration at MAMI. The mesonic cloud dynamics are predicted to be dominant and appreciably changing in this region while the momentum transfer is sufficiently low to be able to test chiral effective field theory calculations. The results disagree with predictions of constituent quark models and are in reasonable agreement with dynamical calculations with pion cloud effects, chiral effective field theory and lattice calculations. The reported measurements suggest that improvement is required to the theoretical calculations and provide valuable input that will allow their refinements. (orig.)

78 FR 42988 - Self-Regulatory Organizations; New York Stock Exchange LLC; NYSE MKT LLC; Order Approving...

Science.gov (United States)

2013-07-18

... a Floor broker leave the Crowd before entering a liquidating order (selling what had been bought... address. For example, given the increasing automation of the Exchanges, the Commission believes that there...

Combining infrared- and green-laser stimulation sources in single-grain luminescence measurements of feldspar and quartz

DEFF Research Database (Denmark)

Duller, G.A.T.; Bøtter-Jensen, L.; Murray, A.S.

2003-01-01

A system designed for measurement of the optically stimulated luminescence (OSL) from individual sand-sized mineral grains has been constructed. Previously, this system was equipped only with a green laser emitting at 532 run, but now an infrared (IR) laser at 830 run has been added. It is now...... possible to interchangeably use the two laser sources for optical stimulation. This is especially valuable for the measurement of feldspars. The power density using the IR laser at the grain is similar to500 W cm(-2), and stimulation for 1 s reduces the OSL signal to near background level. Initial results...

How to Measure Quality of Service Using Unstructured Data Analysis: A General Method Design

Directory of Open Access Journals (Sweden)

Lucie Sperková,

2015-10-01

Full Text Available The aim of the paper is to design a general method usable for measuring the quality of the service from the customer’s point of view with the help of content analytics. Large amount of unstructured data is created by customers of the service. This data can provide a valuable feedback from the service usage. Customers talk among themselves about their experiences and feelings from consumption of the service. The design of the method is based on a systematic literature review in the area of the service quality and unstructured data analysis. Analytics and quality measurement models are collected and critically evaluated regarding their potential use for measuring IT service quality. The method can be used by IT service provider to measure and monitor service quality based on World-of-Mouth in order to continual service improvement.

Predicting clinical concussion measures at baseline based on motivation and academic profile.

Science.gov (United States)

Trinidad, Katrina J; Schmidt, Julianne D; Register-Mihalik, Johna K; Groff, Diane; Goto, Shiho; Guskiewicz, Kevin M

2013-11-01

The purpose of this study was to predict baseline neurocognitive and postural control performance using a measure of motivation, high school grade point average (hsGPA), and Scholastic Aptitude Test (SAT) score. Cross-sectional. Clinical research center. Eighty-eight National Collegiate Athletic Association Division I incoming student-athletes (freshman and transfers). Participants completed baseline clinical concussion measures, including a neurocognitive test battery (CNS Vital Signs), a balance assessment [Sensory Organization Test (SOT)], and motivation testing (Rey Dot Counting). Participants granted permission to access hsGPA and SAT total score. Standard scores for each CNS Vital Signs domain and SOT composite score. Baseline motivation, hsGPA, and SAT explained a small percentage of the variance of complex attention (11%), processing speed (12%), and composite SOT score (20%). Motivation, hsGPA, and total SAT score do not explain a significant amount of the variance in neurocognitive and postural control measures but may still be valuable to consider when interpreting neurocognitive and postural control measures.

Characterization of damaged composite laminates by an optical measurement of the displacement field

International Nuclear Information System (INIS)

Loukil, M S; Ayadi, Z; Varna, J

2012-01-01

The degradation of the elastic properties of composite laminates with intralaminar cracks is caused by reduced stress in the damaged layer which is mainly due to two parameters: the crack opening displacement (COD) and the crack sliding displacement (CSD). In this paper these parameters are measured experimentally providing laminate stiffness reduction models with valuable information for validation of used assumptions and for defining limits of their application. In particular, the displacement field on the edges of a [0/ +70 4 / −70 4 ] s glass fiber/epoxy laminate specimens with multiple intralaminar cracks is studied and the COD and CSD dependence on the applied mechanical load is measured. The specimen full-field displacement measurement is carried out using ESPI (Electronic Speckle Pattern Interferometry). By studying the displacement discontinuities, the crack face displacements were measured. A comparison between the COD and the CSD (for the same crack) is performed.

Estimation of road profile variability from measured vehicle responses

Science.gov (United States)

Fauriat, W.; Mattrand, C.; Gayton, N.; Beakou, A.; Cembrzynski, T.

2016-05-01

When assessing the statistical variability of fatigue loads acting throughout the life of a vehicle, the question of the variability of road roughness naturally arises, as both quantities are strongly related. For car manufacturers, gathering information on the environment in which vehicles evolve is a long and costly but necessary process to adapt their products to durability requirements. In the present paper, a data processing algorithm is proposed in order to estimate the road profiles covered by a given vehicle, from the dynamic responses measured on this vehicle. The algorithm based on Kalman filtering theory aims at solving a so-called inverse problem, in a stochastic framework. It is validated using experimental data obtained from simulations and real measurements. The proposed method is subsequently applied to extract valuable statistical information on road roughness from an existing load characterisation campaign carried out by Renault within one of its markets.

Healthy Checkout Lines: A Study in Urban Supermarkets.

Science.gov (United States)

Adjoian, Tamar; Dannefer, Rachel; Willingham, Craig; Brathwaite, Chantelle; Franklin, Sharraine

2017-09-01

To understand the impact of healthy checkouts in Bronx, New York City supermarkets. Consumer purchasing behavior was observed for 2 weeks in 2015. Three supermarkets in the South Bronx. A total of 2,131 adult shoppers (aged ≥18 years) who paid for their groceries at 1 of the selected study checkout lines. Two checkout lines were selected per store; 1 was converted to a healthy checkout and the other remained as it was (standard checkout). Data collectors observed consumer behavior at each line and recorded items purchased from checkout areas. Percentage of customers who purchase items from the checkout area; quantity and price of healthy and unhealthy items purchased from the healthy and standard checkout lines. Measures were analyzed by study condition using chi-square and t tests; significance was determined at α = .05. Only 4.0% of customers bought anything from the checkout area. A higher proportion of customers using the healthy vs standard checkout line bought healthy items (56.5% vs 20.5%; P < .001). When healthier products were available, the proportion of healthy purchases increased. Findings contribute to limited research on effectiveness of healthy checkouts in supermarkets. Similar interventions should expect an increase in healthy purchases from the checkout area, but limited overall impact. Copyright © 2017 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Measurement of trace emissions and combustion characteristics for a mass fire

International Nuclear Information System (INIS)

Susott, R.A.; Ward, D.E.; Babbitt, R.E.; Latham, D.J.

1991-01-01

Results are presented of a continuing study of research that was started in 1988. A new sampling system was designed to provide fire dynamics data from within the fire. This chapter describes the sampling system, the measurements it provided on one biomass fire, and some valuable parameters that can be calculated such as emission factors, combustion efficiency, and rate of fuel consumption. The large prescribed fire in Ontario, Canada, provided a practical test of this package that can be used to assess the application of the monitoring concept to a broad range of biomass fires. Measurements of wind vectors, temperature, and emissions of CO 2 , CO and particulates are reported for a 40-minute period from ignition through the critical period of maximum release of heat to the near extinction of the smoldering combustion phase

Assessment of different biomarkers provides valuable diagnostic standards in the evaluation of the risk of acute rejection.

Science.gov (United States)

Zheng, Jin; Ding, Xiaoming; Tian, Xiaohui; Jin, Zhankui; Pan, Xiaoming; Yan, Hang; Feng, Xinshun; Hou, Jun; Xiang, Heli; Ren, Li; Tian, Puxun; Xue, Wujun

2012-09-01

Acute rejection (AR) is a strong risk factor for chronic rejection in renal transplant recipients. Accurate and timely diagnosis of AR episodes is very important for disease control and prognosis. Therefore, objectively evaluated the immune status of patients is essential in the field of post-transplantation treatment. This longitudinal study investigated the usefulness of five biomarkers, human leukocyte antigen (HLA)-G5 and sCD30 level in sera, intracellular adenosine triphosphate (iATP) release level of CD4(+) T cells, and granzyme B/perforin expression in peripheral blood mononuclear cells (PBMCs) and biopsies, to detect AR and the resolution of biomarkers in a total of 84 cases of renal transplantation. The data demonstrated that recipients with clinical or biopsy proven rejection significantly increased iATP release level of CD4(+) T cells, and elevated sCD30 but lowered HLA-G5 level in sera compared with individuals with stable graft function. Expression levels of granzyme B and perforin were also elevated in PBMCs and graft biopsies of AR patients. Taken together, we identified that upregulation of sCD30, iATP, granzyme B, perforin, and downregulation of HLA-G5 could provide valuable diagnostic standards to identify those recipients in the risk of AR. And iATP may be a better biomarker than others for predicting the graft rejection episode.

Organic oxalate as leachant and precipitant for the recovery of valuable metals from spent lithium-ion batteries

International Nuclear Information System (INIS)

Sun Liang; Qiu Keqiang

2012-01-01

Graphical abstract: Display Omitted Highlights: ► Vacuum pyrolysis as a pretreatment was used to separate cathode material from aluminum foils. ► Cobalt and lithium can be leached using oxalate while cobalt can be directly precipitated as cobalt oxalate. ► Cobalt and lithium can be separated efficiently from each other only in the oxalate leaching process. ► High reaction efficiency of LiCoO 2 was obtained with oxalate. - Abstract: Spent lithium-ion batteries containing lots of strategic resources such as cobalt and lithium are considered as an attractive secondary resource. In this work, an environmentally compatible process based on vacuum pyrolysis, oxalate leaching and precipitation is applied to recover cobalt and lithium from spent lithium-ion batteries. Oxalate is introduced as leaching reagent meanwhile as precipitant which leaches and precipitates cobalt from LiCoO 2 and CoO directly as CoC 2 O 4 ·2H 2 O with 1.0 M oxalate solution at 80 °C and solid/liquid ratio of 50 g L −1 for 120 min. The reaction efficiency of more than 98% of LiCoO 2 can be achieved and cobalt and lithium can also be separated efficiently during the hydrometallurgical process. The combined process is simple and adequate for the recovery of valuable metals from spent lithium-ion batteries.

Germ cell transplantation using sexually competent fish: an approach for rapid propagation of endangered and valuable germlines.

Directory of Open Access Journals (Sweden)

Sullip K Majhi

Full Text Available The transplantation of germ cells into adult recipient gonads is a tool with wide applications in animal breeding and conservation of valuable and/or endangered species; it also provides a means for basic studies involving germ cell (GC proliferation and differentiation. Here we describe the establishment of a working model for xenogeneic germ cell transplantation (GCT in sexually competent fish. Spermatogonial cells isolated from juveniles of one species, the pejerrey Odontesthes bonariensis (Atherinopsidae, were surgically transplanted into the gonads of sexually mature Patagonian pejerrey O. hatcheri, which have been partially depleted of endogenous GCs by a combination of Busulfan (40 mg/kg and high water temperature (25 degrees C treatments. The observation of the donor cells' behavior showed that transplanted spermatogonial cells were able to recolonize the recipients' gonads and resume spermatogenesis within 6 months from the GCT. The presence of donor-derived gametes was confirmed by PCR in 20% of the surrogate O. hatcheri fathers at 6 months and crosses with O. bonariensis mothers produced hybrids and pure O. bonariensis, with donor-derived germline transmission rates of 1.2-13.3%. These findings indicate that transplantation of spermatogonial cells into sexually competent fish can shorten considerably the production time of donor-derived gametes and offspring and could play a vital role in germline conservation and propagation of valued and/or endangered fish species.

Instrumentation for localized measurements in two-phase flow conditions

International Nuclear Information System (INIS)

Neff, G.G.; Averill, R.H.; Shurts, S.W.

1979-01-01

Three types of instrumentation that have been developed by EG and G Idaho, Inc., and its predecessor, Aerojet Nuclear company, at the Idaho National Engineering Laboratory to investigate two-phase flow phenomenon in a nuclear reactor at the Loss-of-Fluid Test (LOFT) facility are discussed: (a) a combination drag disc-turbine transducer (DTT), (b) a multibeam nuclear hardened gamma densitometer system, and (c) a conductivity sensitive liquid level transducer (LLT). The DTT obtains data on the complex problem of two-phase flow conditions in the LOFT primary coolant system during a loss-os-coolant experiment (LOCE). The discussion of the DTT describes how a turbine, measuring coolant velocity, and a drag disc, measuring coolant momentum flux, can provide valuable mass flow data. The nuclear hardened gamma densitometer is used to obtain density and flow regime information for two-phase flow in the LOFT primary coolant system during a LOCE. The LLT is used to measure water and steam conditions within the LOFT reactor core during a LOCE. The LLT design and the type of data obtained are described

How Valuable is a Well-Crafted Design and Name Brand?

DEFF Research Database (Denmark)

Kristensen, Tore; Gabrielsen, Gorm; Zaichkowsky, Judith

2012-01-01

Preferences for similarly designed consumer products, evaluated blind and branded and also with and without prices, were tested in a consumer setting. The consumer's perceptual experience led to preference of the well-crafted high-priced option. This preference was enhanced by priming consumers w...... of choices using measures of inherent design acumen, prior experience, and purchasing behavior were largely unsuccessful.......Preferences for similarly designed consumer products, evaluated blind and branded and also with and without prices, were tested in a consumer setting. The consumer's perceptual experience led to preference of the well-crafted high-priced option. This preference was enhanced by priming consumers...

Inspiratory Capacity during Exercise: Measurement, Analysis, and Interpretation

Directory of Open Access Journals (Sweden)

Jordan A. Guenette

2013-01-01

Full Text Available Cardiopulmonary exercise testing (CPET is an established method for evaluating dyspnea and ventilatory abnormalities. Ventilatory reserve is typically assessed as the ratio of peak exercise ventilation to maximal voluntary ventilation. Unfortunately, this crude assessment provides limited data on the factors that limit the normal ventilatory response to exercise. Additional measurements can provide a more comprehensive evaluation of respiratory mechanical constraints during CPET (e.g., expiratory flow limitation and operating lung volumes. These measurements are directly dependent on an accurate assessment of inspiratory capacity (IC throughout rest and exercise. Despite the valuable insight that the IC provides, there are no established recommendations on how to perform the maneuver during exercise and how to analyze and interpret the data. Accordingly, the purpose of this manuscript is to comprehensively examine a number of methodological issues related to the measurement, analysis, and interpretation of the IC. We will also briefly discuss IC responses to exercise in health and disease and will consider how various therapeutic interventions influence the IC, particularly in patients with chronic obstructive pulmonary disease. Our main conclusion is that IC measurements are both reproducible and responsive to therapy and provide important information on the mechanisms of dyspnea and exercise limitation during CPET.

Performance measurement system for training simulators. Interim report

International Nuclear Information System (INIS)

Bockhold, G. Jr.; Roth, D.R.

1978-05-01

In the first project phase, the project team has designed, installed, and test run on the Browns Ferry nuclear power plant training simulator a performance measurement system capable of automatic recording of statistical information on operator actions and plant response. Key plant variables and operator actions were monitored and analyzed by the simulator computer for a selected set of four operating and casualty drills. The project has the following objectives: (1) To provide an empirical data base for statistical analysis of operator reliability and for allocation of safety and control functions between operators and automated controls; (2) To develop a method for evaluation of the effectiveness of control room designs and operating procedures; and (3) To develop a system for scoring aspects of operator performance to assist in training evaluations and to support operator selection research. The performance measurement system has shown potential for meeting the research objectives. However, the cost of training simulator time is high; to keep research program costs reasonable, the measurement system is being designed to be an integral part of operator training programs. In the pilot implementation, participating instructors judged the measurement system to be a valuable and objective extension of their abilities to monitor trainee performance

Feasible conversion of solid waste bauxite tailings into highly crystalline 4A zeolite with valuable application

Energy Technology Data Exchange (ETDEWEB)

Ma, Dongyang; Wang, Zhendong; Guo, Min [State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083 (China); Zhang, Mei, E-mail: zhangmei@ustb.edu.cn [State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083 (China); Liu, Jingbo [The Department of Chemistry, Texas A and M University-Kingsville, Kingsville, TX 78363 (United States); The Advanced Light Source, Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States)

2014-11-15

Highlights: • Concept to convert waste to valuable product is carried out in this study. • An industrially feasible and cost-effective approach was developed and optimized. • Highly crystalline and well-defined zeolite was produced under moderate conditions. • The zeolite derived from the bauxite tailings displayed high ion exchange capacity. • Bauxite tailings have potential application in heavy metal ions adsorbent. - Abstract: Bauxite tailings are a major type of solid wastes generated in the flotation process. The waste by-products caused significant environmental impact. To lessen this hazardous effect from poisonous mine tailings, a feasible and cost-effective solution was conceived and implemented. Our approach focused on reutilization of the bauxite tailings by converting it to 4A zeolite for reuse in diverse applications. Three steps were involved in the bauxite conversion: wet-chemistry, alkali fusion, and crystallization to remove impurities and to prepare porous 4A zeolite. It was found that the cubic 4A zeolite was single phase, in high purity, with high crystallinity and well-defined structure. Importantly, the 4A zeolite displayed maximum calcium ion exchange capacity averaged at 296 mg CaCO{sub 3}/g, comparable to commercially-available zeolite (310 mg CaCO{sub 3}/g) exchange capacity. Base on the optimal synthesis condition, the reaction yield of zeolite 4A from bauxite tailings achieved to about 38.43%, hence, this study will provide a new paradigm for remediation of bauxite tailings, further mitigating the environmental and health care concerns, particularly in the mainland of PR China.

Vacuum pyrolysis and hydrometallurgical process for the recovery of valuable metals from spent lithium-ion batteries

International Nuclear Information System (INIS)

Sun, Liang; Qiu, Keqiang

2011-01-01

Highlights: → The cathode active materials LiCoO 2 from spent lithium-ion batteries peeled completely from aluminum foils by vacuum pyrolysis and hydrometallurgical process. → The aluminum foils were excellent without damage after vacuum pyrolysis. → The pyrolysis products organic fluorine compounds from organic electrolyte and binder were collected and enriched. → High leaching efficiencies of cobalt and lithium were obtained with H 2 SO 4 and H 2 O 2 . - Abstract: Spent lithium-ion batteries contain lots of strategic resources such as cobalt and lithium together with other hazardous materials, which are considered as an attractive secondary resource and environmental contaminant. In this work, a novel process involving vacuum pyrolysis and hydrometallurgical technique was developed for the combined recovery of cobalt and lithium from spent lithium-ion batteries. The results of vacuum pyrolysis of cathode material showed that the cathode powder composing of LiCoO 2 and CoO peeled completely from aluminum foils under the following experimental conditions: temperature of 600 o C, vacuum evaporation time of 30 min, and residual gas pressure of 1.0 kPa. Over 99% of cobalt and lithium could be recovered from peeled cobalt lithium oxides with 2 M sulfuric acid leaching solution at 80 o C and solid/liquid ratio of 50 g L -1 for 60 min. This technology offers an efficient way to recycle valuable materials from spent lithium-ion batteries, and it is feasible to scale up and help to reduce the environmental pollution of spent lithium-ion batteries.

Vacuum pyrolysis and hydrometallurgical process for the recovery of valuable metals from spent lithium-ion batteries

Energy Technology Data Exchange (ETDEWEB)

Sun, Liang [College of Chemistry and Chemical Engineering, Central South University, Changsha 410083 (China); Key Laboratory of Resources Chemistry of Nonferrous Metals, Central South University, Ministry of Education of the People' s Republic of China (China); Qiu, Keqiang, E-mail: qiuwhs@sohu.com [College of Chemistry and Chemical Engineering, Central South University, Changsha 410083 (China); Key Laboratory of Resources Chemistry of Nonferrous Metals, Central South University, Ministry of Education of the People' s Republic of China (China)

2011-10-30

Highlights: {yields} The cathode active materials LiCoO{sub 2} from spent lithium-ion batteries peeled completely from aluminum foils by vacuum pyrolysis and hydrometallurgical process. {yields} The aluminum foils were excellent without damage after vacuum pyrolysis. {yields} The pyrolysis products organic fluorine compounds from organic electrolyte and binder were collected and enriched. {yields} High leaching efficiencies of cobalt and lithium were obtained with H{sub 2}SO{sub 4} and H{sub 2}O{sub 2}. - Abstract: Spent lithium-ion batteries contain lots of strategic resources such as cobalt and lithium together with other hazardous materials, which are considered as an attractive secondary resource and environmental contaminant. In this work, a novel process involving vacuum pyrolysis and hydrometallurgical technique was developed for the combined recovery of cobalt and lithium from spent lithium-ion batteries. The results of vacuum pyrolysis of cathode material showed that the cathode powder composing of LiCoO{sub 2} and CoO peeled completely from aluminum foils under the following experimental conditions: temperature of 600 {sup o}C, vacuum evaporation time of 30 min, and residual gas pressure of 1.0 kPa. Over 99% of cobalt and lithium could be recovered from peeled cobalt lithium oxides with 2 M sulfuric acid leaching solution at 80 {sup o}C and solid/liquid ratio of 50 g L{sup -1} for 60 min. This technology offers an efficient way to recycle valuable materials from spent lithium-ion batteries, and it is feasible to scale up and help to reduce the environmental pollution of spent lithium-ion batteries.

Feasible conversion of solid waste bauxite tailings into highly crystalline 4A zeolite with valuable application

International Nuclear Information System (INIS)

Ma, Dongyang; Wang, Zhendong; Guo, Min; Zhang, Mei; Liu, Jingbo

2014-01-01

Highlights: • Concept to convert waste to valuable product is carried out in this study. • An industrially feasible and cost-effective approach was developed and optimized. • Highly crystalline and well-defined zeolite was produced under moderate conditions. • The zeolite derived from the bauxite tailings displayed high ion exchange capacity. • Bauxite tailings have potential application in heavy metal ions adsorbent. - Abstract: Bauxite tailings are a major type of solid wastes generated in the flotation process. The waste by-products caused significant environmental impact. To lessen this hazardous effect from poisonous mine tailings, a feasible and cost-effective solution was conceived and implemented. Our approach focused on reutilization of the bauxite tailings by converting it to 4A zeolite for reuse in diverse applications. Three steps were involved in the bauxite conversion: wet-chemistry, alkali fusion, and crystallization to remove impurities and to prepare porous 4A zeolite. It was found that the cubic 4A zeolite was single phase, in high purity, with high crystallinity and well-defined structure. Importantly, the 4A zeolite displayed maximum calcium ion exchange capacity averaged at 296 mg CaCO 3 /g, comparable to commercially-available zeolite (310 mg CaCO 3 /g) exchange capacity. Base on the optimal synthesis condition, the reaction yield of zeolite 4A from bauxite tailings achieved to about 38.43%, hence, this study will provide a new paradigm for remediation of bauxite tailings, further mitigating the environmental and health care concerns, particularly in the mainland of PR China

Measuring the productivity of university research reactors

International Nuclear Information System (INIS)

Voth, M.H.

1989-01-01

University Research Reactors (URRs) on 33 campuses in the United States provide valuable contributions to academic instruction and research programs. In most cases, there are no alternative diagnostic techniques to supplant the need for a reactor and associated facilities. Since URRs constitute a major financial commitment, it is important that they be operated in a productive manner. Productivity may be defined as the sum of new knowledge generated, existing knowledge transferred to others, and analytical services provided to assist in the generation of new knowledge; another definition of productivity is this sum expressed as a function of the cost incurred. In either case, a consistent measurement is difficult and more qualitative than quantitative. A uniform reporting system has been proposed that defines simplified categories through which meaningful comparisons can be performed

Emergency contraception

Science.gov (United States)

Morning-after pill; Postcoital contraception; Birth control - emergency; Plan B; Family planning - emergency contraception ... IUD placed inside the uterus CHOICES FOR EMERGENCY CONTRACEPTION Two emergency contraceptive pills may be bought without a prescription. ...

Measuring the concentration of carboxylic acid groups in torrefied spruce wood.

Science.gov (United States)

Khazraie Shoulaifar, Tooran; Demartini, Nikolai; Ivaska, Ari; Fardim, Pedro; Hupa, Mikko

2012-11-01

Torrefaction is moderate thermal treatment (∼200-300°C) to improve the energy density, handling and storage properties of biomass fuels. In biomass, carboxylic sites are partially responsible for its hygroscopic. These sites are degraded to varying extents during torrefaction. In this paper, we apply methylene blue sorption and potentiometric titration to measure the concentration of carboxylic acid groups in spruce wood torrefied for 30min at temperatures between 180 and 300°C. The results from both methods were applicable and the values agreed well. A decrease in the equilibrium moisture content at different humidity was also measured for the torrefied wood samples, which is in good agreement with the decrease in carboxylic acid sites. Thus both methods offer a means of directly measuring the decomposition of carboxylic groups in biomass during torrefaction as a valuable parameter in evaluating the extent of torrefaction which provides new information to the chemical changes occurring during torrefaction. Copyright © 2012 Elsevier Ltd. All rights reserved.

A Framework for Measuring Low-Value Care.

Science.gov (United States)

Miller, George; Rhyan, Corwin; Beaudin-Seiler, Beth; Hughes-Cromwick, Paul

2018-04-01

It has been estimated that more than 30% of health care spending in the United States is wasteful, and that low-value care, which drives up costs unnecessarily while increasing patient risk, is a significant component of wasteful spending. To address the need for an ability to measure the magnitude of low-value care nationwide, identify the clinical services that are the greatest contributors to waste, and track progress toward eliminating low-value use of these services. Such an ability could provide valuable input to the efforts of policymakers and health systems to improve efficiency. We reviewed existing methods that could contribute to measuring low-value care and developed an integrated framework that combines multiple methods to comprehensively estimate and track the magnitude and principal sources of clinical waste. We also identified a process and needed research for implementing the framework. A comprehensive methodology for measuring and tracking low-value care in the United States would provide an important contribution toward reducing waste. Implementation of the framework described in this article appears feasible, and the proposed research program will allow moving incrementally toward full implementation while providing a near-term capability for measuring low-value care that can be enhanced over time. Copyright © 2018 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Polarization measurements for P-12C elastic scattering between 40-75 MeV

International Nuclear Information System (INIS)

Kato, S.; Okada, K.; Kondo, M.; Shimizu, A.; Hosono, K.; Saito, T.; Matsuoka, N.; Nagamachi, S.; Nisimura, K.; Tamura, N.

1980-01-01

Absolute values of the polarization in p- 12 C elastic scattering have been measured at 60.0 and 64.5 MeV at 47.5 0 in the laboratory system using a double scattering method and a method to measure an asymmetry with a polarized beam. The results are P(60.0 MeV, 47.5 0 ) = 0.965 +- 0.011 and P(64.5 MeV, 47.5 0 ) = 0.975 +- 0.011. Based on these values, the polarization measurements have been extended to the energy range from 40-75 MeV at several angles around 47.5 0 using the polarized proton beam and the energy degrader. Differential cross sections and polarizations from 15-115 0 are also presented at 65 MeV. These data will be valuable for the monitoring of beam polarization in this energy region. (orig.)

Measuring Welfare beyond GDP : 'Objective' and 'Subjective' Indicators in Sweden, 1968-2015

Directory of Open Access Journals (Sweden)

Christopher Kullenberg

2017-10-01

Full Text Available This article analyses a series of negotiations on how to measure welfare and quality of life in Sweden beyond economic indicators. It departs from a 2015 Government Official Report that advanced a strong recommendation to measure only 'objective indicators' of quality of life, rather than relying on what is referred to as 'subjective indicators' such as life satisfaction and happiness. The assertion of strictly 'objective' indicators falls back on a sociological perspective developed in the 1970s, which conceived of welfare as being measurable as 'levels of living', a framework that came to be called 'the Scandinavian model of welfare research'. However, in the mid-2000s, objective indicators were challenged scientifically by the emerging field of happiness studies, which also found political advocates in Sweden who argued that subjective indicators should become an integral part of measuring welfare. This tension between 'subjective' and 'objective' measurements resulted in a controversy between several actors about what should count as a valuable measurement of welfare. As a consequence, we argue that the creation of such value meters is closely intertwined with how welfare is defined, and by what measures welfare should be carried through.

How to measure employee satisfaction

International Nuclear Information System (INIS)

Castillejo, A.

1998-01-01

Competitiveness is impossible without satisfied employees. Excellent organisations base their success on customer loyalty, providing products and services which exceed expectations, which are always increasing. For this reason it is necessary to continually improve the organisation's performance and, therefore the activities which lead to this performance. This is not possible to do without the involvement and commitment of the persons carrying out the activities: employees. The presentation places employee satisfaction within the EFQM Business Excellent Model. The persons most adequate for improving the activities carried out by the organisation are those most familiar with them: employees. To bring this about it is necessary to develop capacities, provide tools necessary for improvement, and provide adequate motivation; indeed, satisfy them. In a society such as today's human resources are the most valuable asset. The aim of the presentation is to introduce the Coopers and Lybrand-Galdano model to measure employee satisfaction, based on the comparison of expectations and perceptions with respect to the organisation. (Author)

Gestalt psychotherapy in the outpatient treatment of borderline ...

African Journals Online (AJOL)

): ... psychotic reactions as well as self-destructive behaviour could also be experienced. ... level graduate program, moved out of her parents' home and bought her own ... effectiveness of cognitive behavior therapy for borderline personality ...

50 CFR 20.73 - Violation of foreign law.

Science.gov (United States)

2010-10-01

..., any migratory bird, or any part, nest, or egg of any such bird taken, bought, sold, transported... WILDLIFE AND PLANTS (CONTINUED) MIGRATORY BIRD HUNTING Federal, State, and Foreign Law § 20.73 Violation of...

Objective and subjective measures of fuel poverty

International Nuclear Information System (INIS)

Waddams Price, Catherine; Brazier, Karl; Wang, Wenjia

2012-01-01

As energy prices continue to rise to reflect the real cost of carbon, the numbers of households in fuel poverty is increasing rapidly. This paper uses a unique data set to explore one alternative measure of fuel poverty based on whether consumers feel able to afford their energy, similar to one introduced by the government a few years ago. We explore the links between an expenditure based and our subjective measure of fuel poverty and compare these differences with those between official measures. Amongst low income households, 28% spent more than a tenth of their income on energy in the home, and so would be likely to qualify as fuel poor under the most usual definition; but only 16% felt unable to afford sufficient energy to keep their homes warm. Amongst this group who felt they had difficulty in affording sufficient energy, less than half were ‘expenditure’ fuel poor. The paper argues that reintroduction of a self-reported measure by the government would be a valuable aid to policy development. - Highlights: ► Defines a subjective measure of fuel poverty (unable to afford heating). ► Fewer households feel fuel poor than meet the official definition of fuel poverty. ► Though they are positively related, different factors affect the two measures. ► Those on standard and prepayment metres more likely to feel fuel poor. ► Large families spend a higher proportion of income on energy but are no more likely to feel fuel poor.

Reflective measurement of water concentration using millimeter wave illumination

Science.gov (United States)

Sung, Shijun; Bennett, David; Taylor, Zachary; Bajwa, Neha; Tewari, Priyamvada; Maccabi, Ashkan; Culjat, Martin; Singh, Rahul; Grundfest, Warren

2011-04-01

THz and millimeter wave technology have shown the potential to become a valuable medical imaging tool because of its sensitivity to water and safe, non-ionizing photon energy. Using the high dielectric constant of water in these frequency bands, reflectionmode THz sensing systems can be employed to measure water content in a target with high sensitivity. This phenomenology may lead to the development of clinical systems to measure the hydration state of biological targets. Such measurements may be useful in fast and convenient diagnosis of conditions whose symptoms can be characterized by changes in water concentration such as skin burns, dehydration, or chemical exposure. To explore millimeter wave sensitivity to hydration, a reflectometry system is constructed to make water concentration measurements at 100 GHz, and the minimum detectable water concentration difference is measured. This system employs a 100 GHz Gunn diode source and Golay cell detector to perform point reflectivity measurements of a wetted polypropylene towel as it dries on a mass balance. A noise limited, minimum detectable concentration difference of less than 0.5% by mass can be detected in water concentrations ranging from 70% to 80%. This sensitivity is sufficient to detect hydration changes caused by many diseases and pathologies and may be useful in the future as a diagnostic tool for the assessment of burns and other surface pathologies.

Buying stolen goods: the ambiguity in trading consumer-to-consumer

DEFF Research Database (Denmark)

Kammersgaard, Tobias; Heinskou, Marie Bruvik; Demant, Jakob

2017-01-01

This study investigates the buying of stolen goods in Denmark. The study consists of a self-report survey based on a representative sample of the general Danish population (n = 2311) and six focus group interviews consisting of both informants experienced with buying stolen goods and of those...... with no experience (n = 37). The survey showed that 4.8% had bought stolen goods, while 15.7% were uncertain whether they had bought stolen goods. Young people, males, and unemployed were more likely to purchase stolen goods. No clear correlation between income and buying stolen goods was found. Focus groups suggest...... the buyers of stolen goods did not buy stolen goods because they could not afford legitimate products. We recommend targeting consumers not interested in buying stolen goods with information about how to avoid such activity....

Communication About the Selecta hot and cold drinks distributor

CERN Document Server

2007-01-01

The contract for the management of the Selecta hot and cold drinks distributors installed on the CERN site will expire on 19 December 2007. As a result, the Selecta credit-keys will no longer be active from this date onwards. Notices will be posted by Selecta on each device showing the date of its removal. As from 3 December 2007, Novae will gradually start installing new distributors. Credit-key top-up points will be installed in the following three locations: Building 513: keys may be bought from the distributor installed Building 60 next to the newspaper kiosk: keys on sale in the kiosk Building 33, on the ground floor: keys may be bought from the distributor installed. All the necessary operating instructions and tips will be indicated clearly on each machine. Restaurant Supervisory Committee

Communication About the Selecta hot and cold drinks distributor

CERN Document Server

FI Department

2007-01-01

The contract for the management of the Selecta hot and cold drinks distributors installed on the CERN site will expire on 19 December 2007. As a result, the Selecta credit-keys will no longer be active from this date onwards. Notices will be posted by Selecta on each device showing the date of its removal. As from 3 December 2007, Novae will gradually start installing new distributors. Credit-key top-up points will be installed in the following three locations: Building 513: keys may be bought from the distributor installed; Building 60 next to the newspaper kiosk: keys on sale in the kiosk; Building 33, on the ground floor: keys may be bought from the distributor installed. All the necessary operating instructions and tips will be indicated clearly on each machine. Restaurant Supervisory Committee

Matrix diffusion studies by electrical conductivity methods. Comparison between laboratory and in-situ measurements

International Nuclear Information System (INIS)

Ohlsson, Y.; Neretnieks, I.

1998-01-01

Traditional laboratory diffusion experiments in rock material are time consuming, and quite small samples are generally used. Electrical conductivity measurements, on the other hand, provide a fast means for examining transport properties in rock and allow measurements on larger samples as well. Laboratory measurements using electrical conductivity give results that compare well to those from traditional diffusion experiments. The measurement of the electrical resistivity in the rock surrounding a borehole is a standard method for the detection of water conducting fractures. If these data could be correlated to matrix diffusion properties, in-situ diffusion data from large areas could be obtained. This would be valuable because it would make it possible to obtain data very early in future investigations of potentially suitable sites for a repository. This study compares laboratory electrical conductivity measurements with in-situ resistivity measurements from a borehole at Aespoe. The laboratory samples consist mainly of Aespoe diorite and fine-grained granite and the rock surrounding the borehole of Aespoe diorite, Smaaland granite and fine-grained granite. The comparison shows good agreement between laboratory measurements and in-situ data

A measurement evaluation program to support nuclear material control and accountability measurements in Brazilian laboratories

International Nuclear Information System (INIS)

Dias, Fabio C.; Mason, Peter

2013-01-01

A measurement evaluation program (MEP) is one of a number of valuable tools that analytical chemists can use to ensure that the data produced in the laboratory are fit for their intended purpose and consistent with expected performance values at a given time. As such, participation in a MEP is an important indicator of the quality of analytical data, and is recognized as such by independent regulatory and/or accreditation bodies. With the intent to implement such a program in Brazil, in November 2012 the Nuclear Energy Commission of Brazil (CNEN), with support from the Department of Energy of the United States' (US-DOE International Safeguards and Engagement Program), decided to initiate a technical cooperation project aiming at organizing a Safeguards Measurement Evaluation Program (SMEP) for Brazilian facilities. The project, entitled Action Sheet 23, was formalized under the terms of the Agreement between the US-DOE and the CNEN concerning research and development in nuclear material control, accountancy, verification, physical protection, and advanced containment and surveillance technologies for International Safeguards Applications. The work, jointly performed by the CNEN's Safeguards Laboratory (LASAL) and the New Brunswick Laboratory (NBL), has the objective to strengthen the traceability of accountability measurements and ensure adequate quality of safeguards measurements for facilities within Brazil, utilizing test samples characterized and provided by NBL. Recommendations to participants included measurement frequency, number of results per sample and format for reporting results using ISO methods for calculating and expressing measurement uncertainties. In this paper, we discuss the main steps taken by CNEN and NBL aiming at implementing such a program and the expected results, in particular the impact of uncertainty estimation on the evaluation of performance of each participant laboratory. The program is considered by Brazilian safeguards authorities

A measurement evaluation program to support nuclear material control and accountability measurements in Brazilian laboratories

Energy Technology Data Exchange (ETDEWEB)

Dias, Fabio C., E-mail: fabio@ird.gov.br [Comissao Nacional de Energia Nuclear (CNEN-RJ), Rio de Janeiro, RJ (Brazil); Mason, Peter, E-mail: peter.mason@ch.doe.gov [New Brunswick Laboratory (DOE/NBL), Argonne, IL (United States)

2013-07-01

A measurement evaluation program (MEP) is one of a number of valuable tools that analytical chemists can use to ensure that the data produced in the laboratory are fit for their intended purpose and consistent with expected performance values at a given time. As such, participation in a MEP is an important indicator of the quality of analytical data, and is recognized as such by independent regulatory and/or accreditation bodies. With the intent to implement such a program in Brazil, in November 2012 the Nuclear Energy Commission of Brazil (CNEN), with support from the Department of Energy of the United States' (US-DOE International Safeguards and Engagement Program), decided to initiate a technical cooperation project aiming at organizing a Safeguards Measurement Evaluation Program (SMEP) for Brazilian facilities. The project, entitled Action Sheet 23, was formalized under the terms of the Agreement between the US-DOE and the CNEN concerning research and development in nuclear material control, accountancy, verification, physical protection, and advanced containment and surveillance technologies for International Safeguards Applications. The work, jointly performed by the CNEN's Safeguards Laboratory (LASAL) and the New Brunswick Laboratory (NBL), has the objective to strengthen the traceability of accountability measurements and ensure adequate quality of safeguards measurements for facilities within Brazil, utilizing test samples characterized and provided by NBL. Recommendations to participants included measurement frequency, number of results per sample and format for reporting results using ISO methods for calculating and expressing measurement uncertainties. In this paper, we discuss the main steps taken by CNEN and NBL aiming at implementing such a program and the expected results, in particular the impact of uncertainty estimation on the evaluation of performance of each participant laboratory. The program is considered by Brazilian safeguards

Sub-critical water as a green solvent for production of valuable materials from agricultural waste biomass: A review of recent work

Directory of Open Access Journals (Sweden)

A. Shitu

2015-07-01

Full Text Available Agricultural waste biomass generated from agricultural production and food processing industry are abundant, such as durian  peel, mango peel, corn straw, rice bran, corn shell, potato peel and many more. Due to low commercial value, these wastes are disposed in landfill, which if not managed properly may cause environmental problems. Currently, environmental laws and regulations pertaining to the pollution from agricultural waste streams by regulatory agencies are stringent and hence the application of toxic solvents during processing has become public concern. Recent development in valuable materials extraction from the decomposition of agricultural waste by sub-critical water treatment from the published literature was review. Physico-chemical characteristic (reaction temperature, reaction time and solid to liquid ratio of the sub-critical water affecting its yield were also reviewed. The utilization of biomass residue from agriculture, forest wood production and from food and feed processing industry may be an important alternative renewable energy supply. The paper also presents future research on sub-critical water.

Time-resolved UV-excited microarray reader for fluorescence energy transfer (FRET) measurements

Science.gov (United States)

Orellana, Adelina; Hokkanen, Ari P.; Pastinen, Tomi; Takkinen, Kristina; Soderlund, Hans

2001-05-01

Analytical systems based on immunochemistry are largely used in medical diagnostics and in biotechnology. There is a significant pressure to develop the present assay formats to become easier to use, faster, and less reagent consuming. Further developments towards high density array--like multianalyte measurement systems would be valuable. To this aim we have studied the applicability of fluorescence resonance energy transfer and time-resolved fluorescence resonance energy transfer in immunoassays on microspots and in microwells. We have used engineered recombinant antibodies detecting the pentameric protein CRP as a model analyte system, and tested different assay formats. We describe also the construction of a time-resolved scanning epifluorometer with which we could measure the FRET interaction between the slow fluorescence decay from europium chelates and its energy transfer to the rapidly decaying fluorophore Cy5.

Pelagic Dealer Commercial Landings Monitoring (HMS Dealers)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains summarized pounds of select pelagic fish species bought by selected federally permitted seafood dealers in the SE Region of the US mainland....

Chapter Two

African Journals Online (AJOL)

User

appreciation of Achebe's creative efforts and the novel's significance in the African literary ... understanding of intellectual culture is undisputable. ..... came his way, and it seldom did, he immediately bought gourds of palm-wine, called round.

A case study of Schizothorax species

African Journals Online (AJOL)

SAM

2014-04-09

Apr 9, 2014 ... Sample fishes were caught alive with an electric fisher and were also bought from the local fish markets. They were transported to ..... (Cyprinodontiformes, Osteichthyes) from the Mexican Plateau. Copeia 1972:728-756.

Full-automatic measurement of the ELSA working point with 'EPOS'

International Nuclear Information System (INIS)

Goetz, T.

1990-11-01

Two years ago the Bonn Electron Stretcher Accelerator ELSA came into operation. Although the control system proved to be a valuable tool for operating the machine, there did not exist any high level application software dealing with beam diagnostics, orbit measurement and closed orbit correction. To cover these main fields of machine physics, a new program 'EPOS' was implemented on top of the existing control system. EPOS integrates data aquisition, beam diagnostics, digitial signal processing and automation of measurement and control in one interactive environment. The system is equipped with a new, easy to use programming language for machine physics and data analysis. EPOS is based on X-windows and can generate high quality diagrams and printouts for all kinds of measured or simulated data. The design and implementation of EPOS is sketched in this document. Its functionality is demonstrated by performing automatic measurements of the ELSA tune with high precision. By using a special method for error correction, the obtained precision can be increased by approximately two orders of magnitude, compared to standard Fourier analysis techniques. The resulting tune values for standard ELSA operating modes are discussed in detail. (orig.) [de

Intraoperative mechanical measurement of bone quality with the DensiProbe.

Science.gov (United States)

Hoppe, Sven; Uhlmann, Michael; Schwyn, Robert; Suhm, Norbert; Benneker, Lorin M

2015-01-01

Reduced bone stock can result in fractures that mostly occur in the spine, distal radius, and proximal femur. In case of operative treatment, osteoporosis is associated with an increased failure rate. To estimate implant anchorage, mechanical methods seem to be promising to measure bone strength intraoperatively. It has been shown that the mechanical peak torque correlates with the local bone mineral density and screw failure load in hip, hindfoot, humerus, and spine in vitro. One device to measure mechanical peak torque is the DensiProbe (AO Research Institute, Davos, Switzerland). The device has shown its effectiveness in mechanical peak torque measurement in mechanical testing setups for the use in hip, hindfoot, and spine. In all studies, the correlation of mechanical torque measurement and local bone mineral density and screw failure load could be shown. It allows the surgeon to judge local bone strength intraoperatively directly at the region of interest and gives valuable information if additional augmentation is needed. We summarize methods of this new technique, its advantages and limitations, and give an overview of actual and possible future applications. Copyright © 2015 The International Society for Clinical Densitometry. Published by Elsevier Inc. All rights reserved.

Absolute luminosity measurements with the LHCb detector at the LHC

CERN Document Server

Aaij, R; Adinolfi, M; Adrover, C; Affolder, A; Ajaltouni, Z; Albrecht, J; Alessio, F; Alexander, M; Alkhazov, G; Alvarez Cartelle, P; Alves, A A; Amato, S; Amhis, Y; Anderson, J; Appleby, R B; Aquines Gutierrez, O; Archilli, F; Arrabito, L; Artamonov, A; Artuso, M; Aslanides, E; Auriemma, G; Bachmann, S; Back, J J; Bailey, D S; Balagura, V; Baldini, W; Barlow, R J; Barschel, C; Barsuk, S; Barter, W; Bates, A; Bauer, C; Bauer, Th; Bay, A; Bediaga, I; Belous, K; Belyaev, I; Ben-Haim, E; Benayoun, M; Bencivenni, G; Benson, S; Benton, J; Bernet, R; Bettler, M-O; van Beuzekom, M; Bien, A; Bifani, S; Bizzeti, A; Bjørnstad, P M; Blake, T; Blanc, F; Blanks, C; Blouw, J; Blusk, S; Bobrov, A; Bocci, V; Bondar, A; Bondar, N; Bonivento, W; Borghi, S; Borgia, A; Bowcock, T J V; Bozzi, C; Brambach, T; van den Brand, J; Bressieux, J; Brett, D; Brisbane, S; Britsch, M; Britton, T; Brook, N H; Brown, H; Büchler-Germann, A; Burducea, I; Bursche, A; Buytaert, J; Cadeddu, S; Caicedo Carvajal, J M; Callot, O; Calvi, M; Calvo Gomez, M; Camboni, A; Campana, P; Carbone, A; Carboni, G; Cardinale, R; Cardini, A; Carson, L; Carvalho Akiba, K; Casse, G; Cattaneo, M; Charles, M; Charpentier, Ph; Chiapolini, N; Ciba, K; Cid Vidal, X; Ciezarek, G; Clarke, P E L; Clemencic, M; Cliff, H V; Closier, J; Coca, C; Coco, V; Cogan, J; Collins, P; Constantin, F; Conti, G; Contu, A; Cook, A; Coombes, M; Corti, G; Cowan, G A; Currie, R; D'Almagne, B; D'Ambrosio, C; David, P; De Bonis, I; De Capua, S; De Cian, M; De Lorenzi, F; De Miranda, J M; De Paula, L; De Simone, P; Decamp, D; Deckenhoff, M; Degaudenzi, H; Deissenroth, M; Del Buono, L; Deplano, C; Deschamps, O; Dettori, F; Dickens, J; Dijkstra, H; Diniz Batista, P; Donleavy, S; Dordei, F; Dosil Suárez, A; Dossett, D; Dovbnya, A; Dupertuis, F; Dzhelyadin, R; Eames, C; Easo, S; Egede, U; Egorychev, V; Eidelman, S; van Eijk, D; Eisele, F; Eisenhardt, S; Ekelhof, R; Eklund, L; Elsasser, Ch; d'Enterria, D G; Esperante Pereira, D; Estève, L; Falabella, A; Fanchini, E; Färber, C; Fardell, G; Farinelli, C; Farry, S; Fave, V; Fernandez Albor, V; Ferro-Luzzi, M; Filippov, S; Fitzpatrick, C; Fontana, M; Fontanelli, F; Forty, R; Frank, M; Frei, C; Frosini, M; Furcas, S; Gallas Torreira, A; Galli, D; Gandelman, M; Gandini, P; Gao, Y; Garnier, J-C; Garofoli, J; Garra Tico, J; Garrido, L; Gaspar, C; Gauvin, N; Gersabeck, M; Gershon, T; Ghez, Ph; Gibson, V; Gligorov, V V; Göbel, C; Golubkov, D; Golutvin, A; Gomes, A; Gordon, H; Grabalosa Gándara, M; Graciani Diaz, R; Granado Cardoso, L A; Graugés, E; Graziani, G; Grecu, A; Gregson, S; Gui, B; Gushchin, E; Guz, Yu; Gys, T; Haefeli, G; Haen, C; Haines, S C; Hampson, T; Hansmann-Menzemer, S; Harji, R; Harnew, N; Harrison, J; Harrison, P F; He, J; Heijne, V; Hennessy, K; Henrard, P; Hernando Morata, J A; van Herwijnen, E; Hicks, E; Hofmann, W; Holubyev, K; Hopchev, P; Hulsbergen, W; Hunt, P; Huse, T; Huston, R S; Hutchcroft, D; Hynds, D; Iakovenko, V; Ilten, P; Imong, J; Jacobsson, R; Jaeger, A; Jahjah Hussein, M; Jans, E; Jansen, F; Jaton, P; Jean-Marie, B; Jing, F; John, M; Johnson, D; Jones, C R; Jost, B; Kandybei, S; Karacson, M; Karbach, T M; Keaveney, J; Kerzel, U; Ketel, T; Keune, A; Khanji, B; Kim, Y M; Knecht, M; Koblitz, S; Koppenburg, P; Kozlinskiy, A; Kravchuk, L; Kreplin, K; Kreps, M; Krocker, G; Krokovny, P; Kruse, F; Kruzelecki, K; Kucharczyk, M; Kukulak, S; Kumar, R; Kvaratskheliya, T; La Thi, V N; Lacarrere, D; Lafferty, G; Lai, A; Lambert, D; Lambert, R W; Lanciotti, E; Lanfranchi, G; Langenbruch, C; Latham, T; Le Gac, R; van Leerdam, J; Lees, J-P; Lefèvre, R; Leflat, A; Lefrançois, J; Leroy, O; Lesiak, T; Li, L; Li Gioi, L; Lieng, M; Liles, M; Lindner, R; Linn, C; Liu, B; Liu, G; Lopes, J H; Lopez Asamar, E; Lopez-March, N; Luisier, J; Machefert, F; Machikhiliyan, I V; Maciuc, F; Maev, O; Magnin, J; Malde, S; Mamunur, R M D; Manca, G; Mancinelli, G; Mangiafave, N; Marconi, U; Märki, R; Marks, J; Martellotti, G; Martens, A; Martin, L; Martín Sánchez, A; Martinez Santos, D; Massafferri, A; Matev, R; Mathe, Z; Matteuzzi, C; Matveev, M; Maurice, E; Maynard, B; Mazurov, A; McGregor, G; McNulty, R; Mclean, C; Meissner, M; Merk, M; Merkel, J; Messi, R; Miglioranzi, S; Milanes, D A; Minard, M-N; Monteil, S; Moran, D; Morawski, P; Mountain, R; Mous, I; Muheim, F; Müller, K; Muresan, R; Muryn, B; Musy, M; Mylroie-Smith, J; Naik, P; Nakada, T; Nandakumar, R; Nardulli, J; Nasteva, I; Nedos, M; Needham, M; Neufeld, N; Nguyen-Mau, C; Nicol, M; Nies, S; Niess, V; Nikitin, N; Oblakowska-Mucha, A; Obraztsov, V; Oggero, S; Ogilvy, S; Okhrimenko, O; Oldeman, R; Orlandea, M; Otalora Goicochea, J M; Owen, P; Pal, B; Palacios, J; Palutan, M; Panman, J; Papanestis, A; Pappagallo, M; Parkes, C; Parkinson, C J; Passaleva, G; Patel, G D; Patel, M; Paterson, S K; Patrick, G N; Patrignani, C; Pavel-Nicorescu, C; Pazos Alvarez, A; Pellegrino, A; Penso, G; Pepe Altarelli, M; Perazzini, S; Perego, D L; Perez Trigo, E; Pérez-Calero Yzquierdo, A; Perret, P; Perrin-Terrin, M; Pessina, G; Petrella, A; Petrolini, A; Pie Valls, B; Pietrzyk, B; Pilar, T; Pinci, D; Plackett, R; Playfer, S; Plo Casasus, M; Polok, G; Poluektov, A; Polycarpo, E; Popov, D; Popovici, B; Potterat, C; Powell, A; du Pree, T; Prisciandaro, J; Pugatch, V; Puig Navarro, A; Qian, W; Rademacker, J H; Rakotomiaramanana, B; Rangel, M S; Raniuk, I; Raven, G; Redford, S; Reid, M M; dos Reis, A C; Ricciardi, S; Rinnert, K; Roa Romero, D A; Robbe, P; Rodrigues, E; Rodrigues, F; Rodriguez Perez, P; Rogers, G J; Roiser, S; Romanovsky, V; Rouvinet, J; Ruf, T; Ruiz, H; Sabatino, G; Saborido Silva, J J; Sagidova, N; Sail, P; Saitta, B; Salzmann, C; Sannino, M; Santacesaria, R; Santamarina Rios, C; Santinelli, R; Santovetti, E; Sapunov, M; Sarti, A; Satriano, C; Satta, A; Savrie, M; Savrina, D; Schaack, P; Schiller, M; Schleich, S; Schmelling, M; Schmidt, B; Schneider, O; Schopper, A; Schune, M -H; Schwemmer, R; Sciubba, A; Seco, M; Semennikov, A; Senderowska, K; Sepp, I; Serra, N; Serrano, J; Seyfert, P; Shao, B; Shapkin, M; Shapoval, I; Shatalov, P; Shcheglov, Y; Shears, T; Shekhtman, L; Shevchenko, O; Shevchenko, V; Shires, A; Silva Coutinho, R; Skottowe, H P; Skwarnicki, T; Smith, A C; Smith, N A; Sobczak, K; Soler, F J P; Solomin, A; Soomro, F; Souza De Paula, B; Spaan, B; Sparkes, A; Spradlin, P; Stagni, F; Stahl, S; Steinkamp, O; Stoica, S; Stone, S; Storaci, B; Straticiuc, M; Straumann, U; Styles, N; Subbiah, V K; Swientek, S; Szczekowski, M; Szczypka, P; Szumlak, T; T'Jampens, S; Teodorescu, E; Teubert, F; Thomas, C; Thomas, E; van Tilburg, J; Tisserand, V; Tobin, M; Topp-Joergensen, S; Tran, M T; Tsaregorodtsev, A; Tuning, N; Ubeda Garcia, M; Ukleja, A; Urquijo, P; Uwer, U; Vagnoni, V; Valenti, G; Vazquez Gomez, R; Vazquez Regueiro, P; Vecchi, S; Velthuis, J J; Veltri, M; Vervink, K; Viaud, B; Videau, I; Vilasis-Cardona, X; Visniakov, J; Vollhardt, A; Voong, D; Vorobyev, A; Voss, H; Wacker, K; Wandernoth, S; Wang, J; Ward, D R; Webber, A D; Websdale, D; Whitehead, M; Wiedner, D; Wiggers, L; Wilkinson, G; Williams, M P; Williams, M; Wilson, F F; Wishahi, J; Witek, M; Witzeling, W; Wotton, S A; Wyllie, K; Xie, Y; Xing, F; Yang, Z; Young, R; Yushchenko, O; Zavertyaev, M; Zhang, F; Zhang, L; Zhang, W C; Zhang, Y; Zhelezov, A; Zhong, L; Zverev, E; Zvyagin, A

2012-01-01

Absolute luminosity measurements are of general interest for colliding-beam experiments at storage rings. These measurements are necessary to determine the absolute cross-sections of reaction processes and are valuable to quantify the performance of the accelerator. LHCb has applied two methods to determine the absolute scale of its luminosity measurements for proton-proton collisions at the LHC with a centre-of-mass energy of 7 TeV. In addition to the classic ``van der Meer scan'' method a novel technique has been developed which makes use of direct imaging of the individual beams using beam-gas and beam-beam interactions. This beam imaging method is made possible by the high resolution of the LHCb vertex detector and the close proximity of the detector to the beams, and allows beam parameters such as positions, angles and widths to be determined. The results of the two methods have comparable precision and are in good agreement. Combining the two methods, an overall precision of 3.5\\% in the absolute lumi...

Phytochemical Screening: Antioxidant and Antibacterial Properties of Potamogeton Species in Order to Obtain Valuable Feed Additives.

Science.gov (United States)

Lupoae, Paul; Cristea, Victor; Borda, Daniela; Lupoae, Mariana; Gurau, Gabriela; Dinica, Rodica Mihaela

2015-01-01

The alcoholic extracts from three submerged perennial plants Potamogeton crispus L., P. pusillus L. and P. pectinatus L. were analyzed by gas chromatography-mass spectrometry coupled with solid phase microextraction (SPME-GC/MS) and by High Performance Liquid Chromatography (HPLC) and their volatile fingerprint and polyphenols composition was mutually compared. Twenty-nine chemical compounds were detected and identified in ethanolic and methanolic extracts; the highest abundance (over 5%) in descending order, was detected for 9,9-dimethyl-8,10- dioxapentacyclo (5,3,0(2,5) 0(3,5,)0 (3,6) decane (21.65%), phenol 2,6 bis (1,1 dimethyletyl) 4-1-methylpropil (20.8%), pentadecanoic acid (14.3%), 2-(5-chloro-2-Methoxyphenyl) pyrrole (8.66%), propanedioic (malonic) acid 2-(4-methylphenyl) sulfonyl ethylidene (5.77%), 2 hydroxy-3 tert butyl-5-isopropyl-6 methyl phenyl ketone (5.76%). The highest total polyphenols and flavonoids content was found in the methanolic extract of P. crispus (112.5±0.5 mg tannic acid/g dry extract; 64.2±1.2 mg quercitin/g dry extract). Antioxidant activities (2,2-difenil-1-picrilhidrazil, hydrogen peroxide and reducing power assays) of obtained extracts are comparable with the standard compounds, butylated hydroxytoluene, rutin and ascorbic acid. Antibacterial efficiency of methanolic extracts was notably demonstrated against Gram negative (Escherichia coli, Enterobacter hormaechei) and Gram positive bacteria (Enterococcus casseliflavus). The data reported for the first time for Romanian Potamogeton species, provides extensive support for the chemical investigations of these plants of the aquatic anthropogene ecosystems in order to obtain valuable bioadditives for animal feed and/or pharmaceutical/food industry.

Decision-Making Styles of Young Chinese, Motswana and ...

African Journals Online (AJOL)

BlignautAS

ISSN 0378-5254 Journal of Family Ecology and Consumer Sciences, Vol 34, 2006. Decision-Making Styles of ... significantly influences shopping behaviour. Four dis- ..... Apparel is a high- involvement shopping item that is often bought for its.

Quantitative measurements of in-cylinder gas composition in a controlled auto-ignition combustion engine

Science.gov (United States)

Zhao, H.; Zhang, S.

2008-01-01

One of the most effective means to achieve controlled auto-ignition (CAI) combustion in a gasoline engine is by the residual gas trapping method. The amount of residual gas and mixture composition have significant effects on the subsequent combustion process and engine emissions. In order to obtain quantitative measurements of in-cylinder residual gas concentration and air/fuel ratio, a spontaneous Raman scattering (SRS) system has been developed recently. The optimized optical SRS setups are presented and discussed. The temperature effect on the SRS measurement is considered and a method has been developed to correct for the overestimated values due to the temperature effect. Simultaneous measurements of O2, H2O, CO2 and fuel were obtained throughout the intake, compression, combustion and expansion strokes. It shows that the SRS can provide valuable data on this process in a CAI combustion engine.

Quantitative measurements of in-cylinder gas composition in a controlled auto-ignition combustion engine

International Nuclear Information System (INIS)

Zhao, H; Zhang, S

2008-01-01

One of the most effective means to achieve controlled auto-ignition (CAI) combustion in a gasoline engine is by the residual gas trapping method. The amount of residual gas and mixture composition have significant effects on the subsequent combustion process and engine emissions. In order to obtain quantitative measurements of in-cylinder residual gas concentration and air/fuel ratio, a spontaneous Raman scattering (SRS) system has been developed recently. The optimized optical SRS setups are presented and discussed. The temperature effect on the SRS measurement is considered and a method has been developed to correct for the overestimated values due to the temperature effect. Simultaneous measurements of O 2 , H 2 O, CO 2 and fuel were obtained throughout the intake, compression, combustion and expansion strokes. It shows that the SRS can provide valuable data on this process in a CAI combustion engine

Interdisciplinary measurements in a spectrum of applications related to frontier technologies

International Nuclear Information System (INIS)

Raj, Baldev

2016-01-01

Measurements are fascinating and valuable pursuits made visible by Galileo Faraday, Michelson, etc. Galileo inspires to do relevant well designed measurements to get insights of phenomena and mechanisms. The judicious choice of measurements in technology is based on usefulness, time required for measurements, cost and effectiveness in correlations with relevant properties and performance criteria. A single measurement technique and methodology is rarely adequate for the purpose and thus multi-measurement techniques and correlations through breaking the silos of techniques and disciplines is practiced for challenging problems posed to experts for solutions. Science, innovation and laboratory measurements with correlations pursued by the author in electromagnetic and acoustic domains are described with illustrative examples. In the laboratory, non-destructive measurements research problems were chosen based on commitment to enhance sensitivity, selectivity and establishing correlations. The sensors and equipment developed by the author, signal analysis and imaging approaches, and new correlations are the focus of the presentation. Author highlights but does not restrict the presentation to research works in advanced steels and zirconium based alloys for nuclear energy. Microstructures (grain size, texture, precipitates, etc.) defects (dislocation cracks, etc.) and residual stresses were characterized and measured to enable high value performance assessments. The author gained expertise for solutions through collaboration with experts in design, manufacturing, mechanics and mechanical metallurgy, physical metallurgy, corrosion, science and technology, end-users and regulatory bodies, etc.

Measuring discharge with acoustic Doppler current profilers from a moving boat

Science.gov (United States)

Mueller, David S.; Wagner, Chad R.; Rehmel, Michael S.; Oberg, Kevin A.; Rainville, Francois

2013-01-01

The use of acoustic Doppler current profilers (ADCPs) from a moving boat is now a commonly used method for measuring streamflow. The technology and methods for making ADCP-based discharge measurements are different from the technology and methods used to make traditional discharge measurements with mechanical meters. Although the ADCP is a valuable tool for measuring streamflow, it is only accurate when used with appropriate techniques. This report presents guidance on the use of ADCPs for measuring streamflow; this guidance is based on the experience of U.S. Geological Survey employees and published reports, papers, and memorandums of the U.S. Geological Survey. The guidance is presented in a logical progression, from predeployment planning, to field data collection, and finally to post processing of the collected data. Acoustic Doppler technology and the instruments currently (2013) available also are discussed to highlight the advantages and limitations of the technology. More in-depth, technical explanations of how an ADCP measures streamflow and what to do when measuring in moving-bed conditions are presented in the appendixes. ADCP users need to know the proper procedures for measuring discharge from a moving boat and why those procedures are required, so that when the user encounters unusual field conditions, the procedures can be adapted without sacrificing the accuracy of the streamflow-measurement data.

Instrumentation-related uncertainty of reflectance and transmittance measurements with a two-channel spectrophotometer.

Science.gov (United States)

Peest, Christian; Schinke, Carsten; Brendel, Rolf; Schmidt, Jan; Bothe, Karsten

2017-01-01

Spectrophotometers are operated in numerous fields of science and industry for a variety of applications. In order to provide confidence for the measured data, analyzing the associated uncertainty is valuable. However, the uncertainty of the measurement results is often unknown or reduced to sample-related contributions. In this paper, we describe our approach for the systematic determination of the measurement uncertainty of the commercially available two-channel spectrophotometer Agilent Cary 5000 in accordance with the Guide to the expression of uncertainty in measurements. We focus on the instrumentation-related uncertainty contributions rather than the specific application and thus outline a general procedure which can be adapted for other instruments. Moreover, we discover a systematic signal deviation due to the inertia of the measurement amplifier and develop and apply a correction procedure. Thereby we increase the usable dynamic range of the instrument by more than one order of magnitude. We present methods for the quantification of the uncertainty contributions and combine them into an uncertainty budget for the device.

Monte Carlo Studies of two Different Conversion Layers for Neutron Measurements with Medipix Silicon Detector.

CERN Document Server

Larsen, Andreas

2013-01-01

In 2007 the ventilation system of CNGS failed and investigations showed that the failure was due to Single Event Upset (SEU). Since then there has been increased interest in studies of neutron flux, that can potentially cause SEU. Two Medipix detectors have previously been installed in the CMS cavern on a test basis and have shown to work as intended[1]. More Medipix detectors will be installed to provide high resolution measurements of the particle flux in the vicinity of the CMS, focusing on measurements of the neutron flux. The measurements will provide an important basis to know what precautions to take to avoid another failure due to SEU. The measurements will also constitute a valuably reference to the FLUKA simulations of the general flux in the CMS cavern, that can potentially lead to important corrections of the simulations. Furthermore, measurements from the Medipix detectors will act as a cross check on the hadronic forward detector radiation monitoring system (HF radmon). Bonnos spheres are alread...

Looking back on a half century of repeat magnetic measurements in France

Science.gov (United States)

Alexandrescu, Mioara Mandea; Gilder, Stuart; Courtillot, Vincent; Le Mouël, Jean Louis; Gilbert, Daniel

Birds do it. Bees do it. And with the discovery of lodestone over 2200 years ago, humans too could incorporate the Earth's magnetic field into their daily lives. Some of the oldest applications for tracking the magnetic field were in land and sea navigation. Magnetic field measurements quickly became an important economic factor in world trade, with documented use dating from the 11th century in China.The measurements are important in other applications as well. For example, rapid field variations are generated by solar activity and its interaction with the terrestrial environment. Large magnetic storms can disrupt satellite operation, communication systems, power transmission networks, and so forth [Campbell, 1997].Geomagnetism also provides a unique opportunity to explore the Earth's outer core, which is mostly liquid (molten) iron, where the field is generated. Field measurements can also yield valuable insights into the location of mineral deposits and aid in applications in the petroleum industry.

A high-stability non-contact dilatometer for low-amplitude temperature-modulated measurements

Energy Technology Data Exchange (ETDEWEB)

Luckabauer, Martin; Sprengel, Wolfgang; Würschum, Roland [Institute of Materials Physics, Graz University of Technology, A-8010 Graz (Austria)

2016-07-15

Temperature modulated thermophysical measurements can deliver valuable insights into the phase transformation behavior of many different materials. While especially for non-metallic systems at low temperatures numerous powerful methods exist, no high-temperature device suitable for modulated measurements of bulk metallic alloy samples is available for routine use. In this work a dilatometer for temperature modulated isothermal and non-isothermal measurements in the temperature range from room temperature to 1300 K is presented. The length measuring system is based on a two-beam Michelson laser interferometer with an incremental resolution of 20 pm. The non-contact measurement principle allows for resolving sinusoidal length change signals with amplitudes in the sub-500 nm range and physically decouples the length measuring system from the temperature modulation and heating control. To demonstrate the low-amplitude capabilities, results for the thermal expansion of nickel for two different modulation frequencies are presented. These results prove that the novel method can be used to routinely resolve length-change signals of metallic samples with temperature amplitudes well below 1 K. This high resolution in combination with the non-contact measurement principle significantly extends the application range of modulated dilatometry towards high-stability phase transformation measurements on complex alloys.

A critical discourse analysis of the attitudes of occupational therapists and physiotherapists towards the systematic use of standardised outcome measurement

DEFF Research Database (Denmark)

Jaeger Pedersen, Tonny; Kaae Kristensen, Hanne

2016-01-01

PURPOSE: To investigate discourses relating to the implementation of standardised outcome measurement within rehabilitation practise. METHOD: It is a critical discourse analysis of texts in professional occupational therapist (OT) and physiotherapist (PT) journals, along with transcriptions from ......, deliberate and conscious reflections in local settings are needed. It is necessary to go beyond normal and familiar professional reflections. To this end, newcomers' opinions are valuable....

Determinants of Trade Credit: A Preliminary Analysis on Construction Sector

Directory of Open Access Journals (Sweden)

Nicoleta Barbuta-Misu

2016-07-01

Full Text Available This paper introduces a preliminary analysis of the correlations between trade credit and some selected measures of financial performance for a sample of 958 firms acting in the construction sector. The examined period covers 2004-2013. The sample derived from Amadeus database contains firms that have sold and bought on credit. Results showed that larger firms offered and used more credit than counterparties. Firms offered and used in same time credit, but not in same level. Firms with higher return on assets and profit margin used and offered less credit from suppliers, respectively to clients. Moreover, more liquid firms used less trade payables.

Measures of agreement between computation and experiment:validation metrics.

Energy Technology Data Exchange (ETDEWEB)

Barone, Matthew Franklin; Oberkampf, William Louis

2005-08-01

With the increasing role of computational modeling in engineering design, performance estimation, and safety assessment, improved methods are needed for comparing computational results and experimental measurements. Traditional methods of graphically comparing computational and experimental results, though valuable, are essentially qualitative. Computable measures are needed that can quantitatively compare computational and experimental results over a range of input, or control, variables and sharpen assessment of computational accuracy. This type of measure has been recently referred to as a validation metric. We discuss various features that we believe should be incorporated in a validation metric and also features that should be excluded. We develop a new validation metric that is based on the statistical concept of confidence intervals. Using this fundamental concept, we construct two specific metrics: one that requires interpolation of experimental data and one that requires regression (curve fitting) of experimental data. We apply the metrics to three example problems: thermal decomposition of a polyurethane foam, a turbulent buoyant plume of helium, and compressibility effects on the growth rate of a turbulent free-shear layer. We discuss how the present metrics are easily interpretable for assessing computational model accuracy, as well as the impact of experimental measurement uncertainty on the accuracy assessment.

Measuring the surgical 'learning curve': methods, variables and competency.

Science.gov (United States)

Khan, Nuzhath; Abboudi, Hamid; Khan, Mohammed Shamim; Dasgupta, Prokar; Ahmed, Kamran

2014-03-01

To describe how learning curves are measured and what procedural variables are used to establish a 'learning curve' (LC). To assess whether LCs are a valuable measure of competency. A review of the surgical literature pertaining to LCs was conducted using the Medline and OVID databases. Variables should be fully defined and when possible, patient-specific variables should be used. Trainee's prior experience and level of supervision should be quantified; the case mix and complexity should ideally be constant. Logistic regression may be used to control for confounding variables. Ideally, a learning plateau should reach a predefined/expert-derived competency level, which should be fully defined. When the group splitting method is used, smaller cohorts should be used in order to narrow the range of the LC. Simulation technology and competence-based objective assessments may be used in training and assessment in LC studies. Measuring the surgical LC has potential benefits for patient safety and surgical education. However, standardisation in the methods and variables used to measure LCs is required. Confounding variables, such as participant's prior experience, case mix, difficulty of procedures and level of supervision, should be controlled. Competency and expert performance should be fully defined. © 2013 The Authors. BJU International © 2013 BJU International.

Towards quantitative measurements of relaxation times and other parameters in the brain

International Nuclear Information System (INIS)

Tofts, P.S.; Du Boulay, E.P.G.H.

1990-01-01

The nature and physical significance of the relaxation times T1 and T2 and of proton density are described. Methods of measuring T1 and T2 are discussed with emphasis on the establishment of precision and the maintenance of accuracy. Reported standards of success are briefly reviewed. We expect sensitivities of the order of 1% to be achievable in serial studies. Although early hopes of disease diagnosis by tissue characterisation were not realised, strict scientific method and careful calibration have made it pracitcable to apply relaxation time measurement to research into disease process. Serial measurements in patients and correlation with similar studies in animal models, biopsy results and autopsy material taken together have provided new knowledge about cerebral oedema, water compartmentation, alcoholism and the natural history of multiple sclerosis. There are prospects of using measurement to monitor treatment in other diseases with diffuse brain abnormalities invisible on the usual images. Secondarily derived parameters and notably the quantification of blood-brain barrier defect after injection of Gadolinium-DTPA also offer prospects of valuable data. (orig.)

A SOFTWARE TOOL TO COMPARE MEASURED AND SIMULATED BUILDING ENERGY PERFORMANCE DATA

Energy Technology Data Exchange (ETDEWEB)

Maile, Tobias; Bazjanac, Vladimir; O' Donnell, James; Garr, Matthew

2011-11-01

Building energy performance is often inadequate when compared to design goals. To link design goals to actual operation one can compare measured with simulated energy performance data. Our previously developed comparison approach is the Energy Performance Comparison Methodology (EPCM), which enables the identification of performance problems based on a comparison of measured and simulated performance data. In context of this method, we developed a software tool that provides graphing and data processing capabilities of the two performance data sets. The software tool called SEE IT (Stanford Energy Efficiency Information Tool) eliminates the need for manual generation of data plots and data reformatting. SEE IT makes the generation of time series, scatter and carpet plots independent of the source of data (measured or simulated) and provides a valuable tool for comparing measurements with simulation results. SEE IT also allows assigning data points on a predefined building object hierarchy and supports different versions of simulated performance data. This paper briefly introduces the EPCM, describes the SEE IT tool and illustrates its use in the context of a building case study.

Local and global recoding methods for anonymizing set-valued data

KAUST Repository

Terrovitis, Manolis; Mamoulis, Nikos; Kalnis, Panos

2010-01-01

In this paper, we study the problem of protecting privacy in the publication of set-valued data. Consider a collection of supermarket transactions that contains detailed information about items bought together by individuals. Even after removing all

Furniture for a Technology-Infused School.

Science.gov (United States)

Fickes, Michael

1998-01-01

Discusses how one New Mexico school district weighed the choices in selecting and purchasing computer furniture for its classrooms. The purchasing process is described, as well as the types of, and reasons for, the furniture bought. (GR)

Enforcing Competition Rules in South Africa

International Development Research Centre (IDRC) Digital Library (Canada)

The smallest independent spaza-shop bought cigarettes manufactured by a company in ..... occasioned a flurry of tut-tutting, the production of purchase requisitions to be ...... Thankfully, the furniture consultants did not attempt to design a table ...

3D Facial Similarity Measure Based on Geodesic Network and Curvatures

Directory of Open Access Journals (Sweden)

Junli Zhao

2014-01-01

Full Text Available Automated 3D facial similarity measure is a challenging and valuable research topic in anthropology and computer graphics. It is widely used in various fields, such as criminal investigation, kinship confirmation, and face recognition. This paper proposes a 3D facial similarity measure method based on a combination of geodesic and curvature features. Firstly, a geodesic network is generated for each face with geodesics and iso-geodesics determined and these network points are adopted as the correspondence across face models. Then, four metrics associated with curvatures, that is, the mean curvature, Gaussian curvature, shape index, and curvedness, are computed for each network point by using a weighted average of its neighborhood points. Finally, correlation coefficients according to these metrics are computed, respectively, as the similarity measures between two 3D face models. Experiments of different persons’ 3D facial models and different 3D facial models of the same person are implemented and compared with a subjective face similarity study. The results show that the geodesic network plays an important role in 3D facial similarity measure. The similarity measure defined by shape index is consistent with human’s subjective evaluation basically, and it can measure the 3D face similarity more objectively than the other indices.

Breast composition: Measurement and clinical use

International Nuclear Information System (INIS)

Ekpo, E.U.; Hogg, P.; Highnam, R.; McEntee, M.F.

2015-01-01

Breast density is a measure of the extent of radiodense fibroglandular tissue in the breast. The risk of developing breast cancer and the risk of missing cancer at screening rise with higher breast density. In this paper, the historical background to breast density measurement is outlined and current evidence based practice is explained. The relevance of breast density knowledge to mammographic practice and image interpretation is considered in the light of clinical assessment and notification of mammographic breast density (MBD). The current work also discusses risk stratification for decision-making regarding screening frequency and better modalities for earlier detection of breast cancer in the dense breast. Automated volumetric approaches are explained while ultrasound, digital breast tomosynthesis, molecular breast imaging, and magnetic resonance imaging are introduced as valuable adjuncts to digital mammography for imaging the dense breast. The work concludes on the important note that screened women should be notified of their breast density, and such notification should be accompanied with clear and adequate information about breast density and cancer risk, strategies associated with lower MBD, as well as best screening intervals and pathways for women with dense breasts. Adoption of these strategies may be crucial to early detection and treatment of cancer and improving survival from the disease. - Highlights: • Breast density is associated with breast cancer risk and interval breast cancer. • Breast density can be measured manually or automatically. • Radiographic exposure factors impact on breast density measurements. • Dense breast often require imaging with three-dimensional modalities. • National breast density data could enable breast cancer risk stratification.

Monochromatic Measurements of the JPSS-1 VIIRS Polarization Sensitivity

Science.gov (United States)

McIntire, Jeff; Moyer, David; Brown, Steven W.; Lykke, Keith R.; Waluschka, Eugene; Oudrari, Hassan; Xiong, Xiaoxiong

2016-01-01

Polarization sensitivity is a critical property that must be characterized for spaceborne remote sensing instruments designed to measure reflected solar radiation. Broadband testing of the first Joint Polar-orbiting Satellite System (JPSS-1) Visible Infrared Imaging Radiometer Suite (VIIRS) showed unexpectedly large polarization sensitivities for the bluest bands on VIIRS (centered between 400 and 600 nm). Subsequent ray trace modeling indicated that large diattenuation on the edges of the bandpass for these spectral bands was the driver behind these large sensitivities. Additional testing using the National Institute of Standards and Technologies Traveling Spectral Irradiance and Radiance Responsivity Calibrations Using Uniform Sources was added to the test program to verify and enhance the model. The testing was limited in scope to two spectral bands at two scan angles; nonetheless, this additional testing provided valuable insight into the polarization sensitivity. Analysis has shown that the derived diattenuation agreed with the broadband measurements to within an absolute difference of about0.4 and that the ray trace model reproduced the general features of the measured data. Additionally, by deriving the spectral responsivity, the linear diattenuation is shown to be explicitly dependent on the changes in bandwidth with polarization state.

Scintillometry for Evaporation Measurements - Between Pragmatism and Perfectionism

Science.gov (United States)

Thiermann, V.

2007-12-01

During the last twenty years, scintillometers have been discovered as powerful tools for the measurement of turbulent heat exchanges in meteorology and related sciences, such as hydrology and agriculture. A rapidly growing number of scintillometer installations access energy balances and determine evaporation over large spatial scales. Scientists target at refining satellite remote sensing schemes and optimizing irrigation to save valuable water resources. Short-path and long-path scintillometers are available with their distinct features, capabilities and applications. The ability of scintillometers to measure path averaged turbulence at high temporal resolution resulted in data sets delivering striking evidence of the particular advantages of the scintillation method. The theory, however, is quite complex and there are still areas of uncertainty. More experimental and theoretical efforts are required or being done to improve our knowledge about turbulence spectra near the dissipation range, about optical scattering in strong turbulence, about similarity relations and about the effect of inhomogeneities and entrainment on scintillation measurements. Instrumental design is being improved with respect to the accuracy of the physical parameters involved, the implementation of new theoretical findings and methods, as well as the optimization of user interfaces to facilitate set-up and operation. Scintillometry fascinates and has gained wide acceptance. Today, even with a long list of questions still remaining open, an overwhelming amount of impressive measurement results satisfies every pragmatic and challenges every perfectionist.

Measurements of scattering processes in negative ion-atom collisions: Progress report, 1 September 1988--31 August 1989

International Nuclear Information System (INIS)

Kvale, T.J.

1989-01-01

The main emphasis of this research effort is the simultaneous study of several of the scattering processes that occur in negative ion-atom collisions. These include: elastic scattering, target excitation/ionization, single electron detachment, and double electron detachment. The measurements will provide absolute total and differential cross sections for the aforementioned processes. These are extremely valuable in providing stringent tests of the approximations used in the various theoretical calculations. This period covers the first year of the grant and the vast majority of the activity was directed toward construction of the apparatus needed to carry out the proposed measurements. Progress toward these goals are summarized. 2 refs., 1 fig

Radioisotope Sample Measurement Techniques in Medicine and Biology. Proceedings of the Symposium on Radioisotope Sample Measurement Techniques

International Nuclear Information System (INIS)

1965-01-01

nominated by 31 Member States of the Agency, and three international organizations. It is hoped that the Proceedings of this Symposium will be a valuable guide to all those concerned with special problems of radioisotope sample measurement techniques

GBEP pilot Ghana. Very valuable and successful - a follow-up is suggested. Conclusions and recommendations

Energy Technology Data Exchange (ETDEWEB)

Hanekamp, E.; Vissers, P.; De Lint, S. [Partners for Innovation, Amsterdam (Netherlands)

2013-02-15

The Global Bio-Energy Partnership (GBEP) has developed a set of 24 sustainability indicators applicable to all forms of bio-energy and aimed at voluntary use by national governments. The GBEP indicators enable governments to assess the bio-energy sector and to develop new policies related to sustainable bio-energy production and use. These indicators have been piloted in Ghana. Modern bio-energy is a big opportunity for the region, which is why NL Agency adopted and supported the pilot, together with the Global Bio-Energy Partnership (GBEP). The pilot project also was supported by the ECOWAS Regional Centre for Renewable Energy and Energy Efficiency (ECREEE) and has been coordinated by the Council for Scientific and Industrial Research (CSIR). The Ghana Energy Commission took the responsibility to involve policymakers. Partners for Innovation was commissioned by NL Agency to provide technical assistance for the pilot. The main aims of the project are: (a) Enhancing the capacity of the host country Ghana (and ECOWAS) to use the GBEP indicators as a tool for assessing the sustainability of its bio-energy sector and/or developing sustainable bio-energy policies; (b) Learning lessons on how to apply the indicators and how to enhance their practicality as a tool for policymakers and giving this as feedback to the GBEP community. Three Ghanaian research institutes (CSIR-FORIG, CSIR-IIR and UG-ISSER) have studied 11 out of the 24 GBEP indicators in the pilot. The pilot has been a success: the 24 sustainability criteria appear to be very valuable for Ghana. As such the indicators provide, also for other governments, a practical tool to assess sustainability of biomass sectors and policies. The report also shows important insights on data availability and quality, and on the applicability of the GBEP indicators in Ghana. The final report provides concrete recommendations on: (1) How Ghana can proceed with the GBEP sustainability indicators; and (2) The lessons learned for

Pharmacy customers' knowledge of side effects of purchased medicines in Mexico.

Science.gov (United States)

Wirtz, Veronika J; Taxis, Katja; Dreser, Anahi

2009-01-01

To analyse pharmacy customers' knowledge and information sources about side effects of medicines they purchased and factors associated with this knowledge. Cross-sectional survey and semi-structured interviews with customers of 52 randomly selected community pharmacies in Morelos state, Mexico. Customers were included if they were older than 18 years, bought at least one drug either with or without medical prescription, and agreed to take part in the survey. Data were analysed using a multinomial logistic regression model. A total of 1445 customers buying 1946 drugs were surveyed (age 42.9 +/- 15.7 years, 56.9% female); 627 (59%) of 1055 customers who purchased prescription-only medicines (POM) did so without a prescription. Of all customers interviewed, 172 (11.9%) affirmed that the bought medicine(s) could cause harm. Only half of those (87 or 6%) were able to identify correctly at least one side effect of the purchased medicines. The majority received the information about side effects from a physician. Customers in semirural areas knew less about side effects (odds ratio: 0.26; 95% CI: 0.11-0.61; P = 0.00); whereas customers buying medicines for chronic pain, hypertension or diabetes knew more (odds ratio 2.63; 95% CI: 1.44-4.80; P = 0.00). The overall majority of customers did not know that medicines they bought could be harmful. This is particularly alarming because they frequently used POM without consulting a physician.

Regional cerebral blood flow measurements using noninvasive 133Xe clearance method in children

International Nuclear Information System (INIS)

Nishimoto, Hiroshi; Maeda, Koji; Kagawa, Yukihide; Morozumi, Kunihiko; Hashimoto, Manami; Tsubokawa, Takashi.

1985-01-01

The noninvasive 133-Xe clearance method of estimating rCBF has been widely used in adult clinical studies. It is safe, noninvasive and reproducible, and has provided valuable insight into adult cerebrovascular pathophysiology. However, in children, this technique has not been used to measure rCBF for some fundamental problems. This study was performed to clarify these fundamental problems for applications of noninvasive 133-Xe clearance technique to children. The results showed that three fundamental problems concerning; (1) volume of dead spaces in airway circuits of the system, (2) increasing of look-through phenomenon and (3) correction methods for recirculated 133-Xe and airway artifacts to estimate rCBF are important for applications to children. These problems should be improved to measure as correct rCBF in children as in adults. (author)

Dual-Function Electrocatalytic and Macroporous Hollow-Fiber Cathode for Converting Waste Streams to Valuable Resources Using Microbial Electrochemical Systems

KAUST Repository

Katuri, Krishna; Kalathil, Shafeer; Ragab, Ala'a; Bian, Bin; AlQahtani, Manal Faisal; Pant, Deepak; Saikaly, Pascal

2018-01-01

Dual-function electrocatalytic and macroporous hollow-fiber cathodes are recently proposed as promising advanced material for maximizing the conversion of waste streams such as wastewater and waste CO2 to valuable resources (e.g., clean freshwater, energy, value-added chemicals) in microbial electrochemical systems. The first part of this progress report reviews recent developments in this type of cathode architecture for the simultaneous recovery of clean freshwater and energy from wastewater. Critical insights are provided on suitable materials for fabricating these cathodes, as well as addressing some challenges in the fabrication process with proposed strategies to overcome them. The second and complementary part of the progress report highlights how the unique features of this cathode architecture can solve one of the intrinsic bottlenecks (gas-liquid mass transfer limitation) in the application of microbial electrochemical systems for CO2 reduction to value-added products. Strategies to further improve the availability of CO2 to microbial catalysts on the cathode are proposed. The importance of understanding microbe-cathode interactions, as well as electron transfer mechanisms at the cathode-cell and cell-cell interface to better design dual-function macroporous hollow-fiber cathodes, is critically discussed with insights on how the choice of material is important in facilitating direct electron transfer versus mediated electron transfer.

Dual-Function Electrocatalytic and Macroporous Hollow-Fiber Cathode for Converting Waste Streams to Valuable Resources Using Microbial Electrochemical Systems

KAUST Repository

Katuri, Krishna

2018-04-30

Dual-function electrocatalytic and macroporous hollow-fiber cathodes are recently proposed as promising advanced material for maximizing the conversion of waste streams such as wastewater and waste CO2 to valuable resources (e.g., clean freshwater, energy, value-added chemicals) in microbial electrochemical systems. The first part of this progress report reviews recent developments in this type of cathode architecture for the simultaneous recovery of clean freshwater and energy from wastewater. Critical insights are provided on suitable materials for fabricating these cathodes, as well as addressing some challenges in the fabrication process with proposed strategies to overcome them. The second and complementary part of the progress report highlights how the unique features of this cathode architecture can solve one of the intrinsic bottlenecks (gas-liquid mass transfer limitation) in the application of microbial electrochemical systems for CO2 reduction to value-added products. Strategies to further improve the availability of CO2 to microbial catalysts on the cathode are proposed. The importance of understanding microbe-cathode interactions, as well as electron transfer mechanisms at the cathode-cell and cell-cell interface to better design dual-function macroporous hollow-fiber cathodes, is critically discussed with insights on how the choice of material is important in facilitating direct electron transfer versus mediated electron transfer.

Students perceive healthcare as a valuable learning environment when accepted as a part of the workplace community.

Science.gov (United States)

Hägg-Martinell, Ann; Hult, Håkan; Henriksson, Peter; Kiessling, Anna

2014-01-01

The healthcare system is complex and the education of medical and nursing students is not always a priority within it. However, education offered at the point of care provides students with opportunities to apply knowledge, and to develop the necessary skills and attitudes needed to practice their future profession. The major objective of this study was to identify students' views of generic aspects of the healthcare environment that influences their progress towards professional competence. We collected free text answers of 75 medical students and 23 nursing students who had completed an extensive questionnaire concerning their learning in clinical wards. In order to obtain richer data and a deeper understanding, we also interviewed a purposive sample of students. Qualitative content analysis was conducted. We identified three themes: (1) How management, planning and organising for learning enabled content and learning activities to relate to the syllabus and workplace, and how this management influenced space and resources for supervision and learning; (2) Workplace culture elucidated how hierarchies and communication affected student learning and influenced their professional development and (3) Learning a profession illustrated the importance of supervisors' approaches to students, their enthusiasm and ability to build relationships, and their feedback to students on performance. From a student perspective, a valuable learning environment is characterised as one where management, planning and organising are aligned and support learning. Students experience a professional growth when the community of practice accepts them, and competent and enthusiastic supervisors give them opportunities to interact with patients and to develop their own responsibilities.

Measuring HIV-related stigma among healthcare providers: a systematic review.

Science.gov (United States)

Alexandra Marshall, S; Brewington, Krista M; Kathryn Allison, M; Haynes, Tiffany F; Zaller, Nickolas D

2017-11-01

In the United States, HIV-related stigma in the healthcare setting is known to affect the utilization of prevention and treatment services. Multiple HIV/AIDS stigma scales have been developed to assess the attitudes and behaviors of the general population in the U.S. towards people living with HIV/AIDS, but fewer scales have been developed to assess HIV-related stigma among healthcare providers. This systematic review aimed to identify and evaluate the measurement tools used to assess HIV stigma among healthcare providers in the U.S. The five studies selected quantitatively assessed the perceived HIV stigma among healthcare providers from the patient or provider perspective, included HIV stigma as a primary outcome, and were conducted in the U.S. These five studies used adapted forms of four HIV stigma scales. No standardized measure was identified. Assessment of HIV stigma among providers is valuable to better understand how this phenomenon may impact health outcomes and to inform interventions aiming to improve healthcare delivery and utilization.

Communication About the Selecta hot and cold drinks distributor

CERN Multimedia

2007-01-01

The contract for the management of the Selecta hot and cold drinks distributors installed on the CERN site will expire on 19 December 2007. As a result, the Selecta credit-keys will no longer be active from this date onwards. Notices will be posted by Selecta on each device showing the date of its removal. As from 3 December 2007, Novae will gradually start installing new distributors. Credit-key top-up points will be installed in the following three locations: -\tBuilding 513: keys may be bought from the distributor installed -\tBuilding 60 next to the newspaper kiosk: keys on sale in the kiosk - Building 33, on the ground floor: keys may be bought from the distributor installed. All the necessary operating instructions and tips will be indicated clearly on each machine. Restaurant Supervisory Committee

Thermal treatment and ammoniacal leaching for the recovery of valuable metals from spent lithium-ion batteries.

Science.gov (United States)

Chen, Yongming; Liu, Nannan; Hu, Fang; Ye, Longgang; Xi, Yan; Yang, Shenghai

2018-05-01

The recycling of spent commercial lithium-ion batteries (LIBs) generates numerous environmental and economic benefits. In this research, a thermal treatment-ammoniacal leaching process is proposed to recover valuable metals from cathode active powder. Based on the thermal behavior by TG-DSC analysis, the cathode active powder is calcined at 300 °C and 550 °C in air atmosphere, and the crystalline phase characterization indicates that a new phase of Co 3 O 4 appears in the cathode active powder calcined at 550 °C, which signifies that the layer structure of LiCoO 2 collapses. The valence of manganese increases to form Li 4 Mn 5 O 12 in spinel structure of LiMn 2 O 4 . Using calcined cathode powder as feed material, ammoniacal leaching is carried out in (NH 4 ) 2 SO 4 -(NH 4 ) 2 SO 3 solution. Under the optimum conditions, Ni, Co, Mn and Li can be completely leached out with efficiencies of 98%, 81%, 92% and 98%, respectively. However, with the increase of ammonia concentration, the leaching efficiency of Mn decreases dramatically to 4% due to the formation of double salts. It is found that Co and Mn can be precipitated into residues in the form of (NH 4 ) 2 Co(SO 4 ) 2 ·H 2 O, (NH 4 ) 2 Mn(SO 3 ) 2 ·H 2 O and (NH 4 ) 2 Mn(SO 4 ) 2 ·6H 2 O under different leaching parameters. Based on the corresponding relationship between the leaching efficiency and phase evolution of object element, selective leaching can be achieved by controlling the formation of double salts. Copyright © 2018 Elsevier Ltd. All rights reserved.

Cardiomyocyte H9c2 cells present a valuable alternative to fish lethal testing for azoxystrobin

International Nuclear Information System (INIS)

Rodrigues, Elsa T.; Pardal, Miguel Â.; Laizé, Vincent; Cancela, M. Leonor; Oliveira, Paulo J.; Serafim, Teresa L.

2015-01-01

The present study aims at identifying, among six mammalian and fish cell lines, a sensitive cell line whose in vitro median inhibitory concentration (IC_5_0) better matches the in vivo short-term Sparus aurata median lethal concentration (LC_5_0). IC_5_0_s and LC_5_0 were assessed after exposure to the widely used fungicide azoxystrobin (AZX). Statistical results were relevant for most cell lines after 48 h of AZX exposure, being H9c2 the most sensitive cells, as well as the ones which provided the best prediction of fish toxicity, with a LC_5_0_,_9_6_h/IC_5_0_,_4_8_h = 0.581. H9c2 cell proliferation upon 72 h of AZX exposure revealed a LC_5_0_,_9_6_h/IC_5_0_,_7_2_h = 0.998. Therefore, identical absolute sensitivities were attained for both in vitro and in vivo assays. To conclude, the H9c2 cell-based assay is reliable and represents a suitable ethical alternative to conventional fish assays for AZX, and could be used to get valuable insights into the toxic effects of other pesticides. - Highlights: • Fish toxicity data are still considered standard information in ecotoxicology. • Alternatives to animal testing have become an important topic of research. • Cell-based assays are currently a promising in vitro alternative. • Comparative studies to accelerate the validation of cell-based methods are required. • H9c2 cell line proved to produce in vitro reliable toxicity results for azoxystrobin. - The application of cell-based assays for environmental toxicity studies would greatly reduce the number of fish needed for toxicity testing without any loss of reliability.

Research on uncertainty evaluation measure and method of voltage sag severity

Science.gov (United States)

Liu, X. N.; Wei, J.; Ye, S. Y.; Chen, B.; Long, C.

2018-01-01

Voltage sag is an inevitable serious problem of power quality in power system. This paper focuses on a general summarization and reviews on the concepts, indices and evaluation methods about voltage sag severity. Considering the complexity and uncertainty of influencing factors, damage degree, the characteristics and requirements of voltage sag severity in the power source-network-load sides, the measure concepts and their existing conditions, evaluation indices and methods of voltage sag severity have been analyzed. Current evaluation techniques, such as stochastic theory, fuzzy logic, as well as their fusion, are reviewed in detail. An index system about voltage sag severity is provided for comprehensive study. The main aim of this paper is to propose thought and method of severity research based on advanced uncertainty theory and uncertainty measure. This study may be considered as a valuable guide for researchers who are interested in the domain of voltage sag severity.

Using global magnetospheric models for simulation and interpretation of Swarm external field measurements

DEFF Research Database (Denmark)

Moretto, T.; Vennerstrøm, Susanne; Olsen, Nils

2006-01-01

simulated external contributions relevant for internal field modeling. These have proven very valuable for the design and planning of the up-coming multi-satellite Swarm mission. In addition, a real event simulation was carried out for a moderately active time interval when observations from the Orsted...... it consistently underestimates the dayside region 2 currents and overestimates the horizontal ionospheric closure currents in the dayside polar cap. Furthermore, with this example we illustrate the great benefit of utilizing the global model for the interpretation of Swarm external field observations and......, likewise, the potential of using Swarm measurements to test and improve the global model....

Extreme Design Loads Calibration of Offshore Wind Turbine Blades through Real Time Measurements

DEFF Research Database (Denmark)

Natarajan, Anand; Vesth, Allan; Lamata, Rebeca Rivera

2014-01-01

Blade Root flap and Edge moments are measured on the blades of a 3.6MW offshore wind turbine in normal operation. Ten minute maxima of the measurements are sampled to determine the extreme blade root flap moment, edge moment and resultant moment over six month duration. A random subset of the mea......Blade Root flap and Edge moments are measured on the blades of a 3.6MW offshore wind turbine in normal operation. Ten minute maxima of the measurements are sampled to determine the extreme blade root flap moment, edge moment and resultant moment over six month duration. A random subset...... of the measurements over a week is taken as input to stochastic load extrapolation whereby the one year extrapolated design extreme is obtained, which are then compared with the maximum extremes obtained from direct measurements over a six month period to validate the magnification in the load levels for the blade...... root flap moment, edge moment obtained by extrapolation. The validation yields valuable information on prescribing the slope of the local extrapolation curve at each mean wind speed. As an alternative to determining the contemporaneous loads for each primary extrapolated load, the blade root resultant...

A survey of temporal data mining

Indian Academy of Sciences (India)

other subtle relationships in the data using a combination of techniques from ... stamped list of items bought by customers lends itself to data mining analysis that ...... Frequent episode mining can be used here as part of an alarm management.

75 FR 45654 - Notice of Intent to Repatriate a Cultural Item: Taylor Museum of the Colorado Springs Fine Arts...

Science.gov (United States)

2010-08-03

... the definition of object of cultural patrimony under 25 U.S.C. 3001. This notice is published as part... traditional Haida longhouse in Alaska. The pole was bought by a man from Los Angeles around 1908. The pole and...

Hypospadias repair

Science.gov (United States)

... before the procedure. Always tell the provider: What medicines your child is taking Drugs, herbs, and vitamins your child ... you bought without a prescription Any allergies your child has to medicine, latex, tape, or skin cleaner Ask the child's ...

A measurement perspective on affirmative action in U.S. medical education

Directory of Open Access Journals (Sweden)

Clarence D. Kreiter

2013-04-01

Full Text Available Background: The U.S. Supreme Court has recently heard another affirmative action case, and similar programs to promote equitable representation in higher education are being debated and enacted around the world. Understanding the empirical and quantitative research conducted over the last 50 years is important in designing effective and fair initiatives related to affirmative action in medical education. Unfortunately, the quantitative measurement research relevant to affirmative action is poorly documented in the scholarly journals that serve medical education. Methods: This research organizes and documents the measurement literature relevant to enacting affirmative action within the medical school environment, and should be valuable for informing future actions. It provides summaries of those areas where the research evidence is strong and highlights areas where more research evidence is needed. To structure the presentation, 10 topic areas are identified in the form of research questions. Results: Measurement evidence related to these questions is reviewed and summarized to provide evidence-based answers. Conclusions: These answers should provide a useful foundation for making important decisions regarding the use of racial diversity initiatives in medical education.

On-line stable isotope measurements during plant and soil gas exchange

International Nuclear Information System (INIS)

Yakir, D.

2001-01-01

Recent techniques for on-line stable isotope measurements during plant and soil exchange of CO 2 and/or water vapor are briefly reviewed. For CO 2 , these techniques provide means for on-line measurements of isotopic discrimination during CO 2 exchange by leaves in the laboratory and in the field, of isotopic discrimination during soil respiration and during soil-atmosphere CO 2 exchange, and of isotopic discrimination in O 2 during plant respiration. For water vapor, these techniques provide means to measure oxygen isotopic composition of water vapor during leaf transpiration and for the analysis of sub microliter condensed water vapor samples. Most of these techniques involve on-line sampling of CO 2 and water vapor from a dynamic, intact soil or plant system. In the laboratory, these systems also allow on-line isotopic analysis by continuous-flow isotope ratio mass spectrometry. The information obtained with these on-line techniques is becoming increasingly valuable, and often critical, for ecophysiologial research and in the study of biosphere-atmosphere interactions. (author)

Segmentation of images for gingival growth measurement

Science.gov (United States)

Kim, Dong-Il; Wilson, Joseph N.

1992-12-01

The ability to measure gingival volume growth from dental casts would provide a valuable resource for periodontists. This problem is attractive from a computer vision standpoint due to the complexities of data acquisition, segmentation of gingival and tooth surfaces and boundaries, and extraction of features (such as tooth axes) to help solve the correspondence problem for multiple casts. In this paper, a structured light 3-D range finder is used to collect raw data. The most complicated subtask is that of detecting discontinuities such as the gingival margin. Discontinuity detection is hindered both by cast anomalies (such as bubbles and holes generated during the process of dental impression) and by the subtle nature of the discontinuities themselves. First, we discuss an approach to segmenting a dental cast into tooth and gingival units using depth and orientation discontinuities. The visible cast surface is reconstructed by obtaining the minimum of a parameterized functional. The first derivative of the energy functional (which corresponds to the Euler-Lagrange equation) is solved using the multigrid methods. both orientation and depth discontinuities are detected by adding a discrete discontinuity functional to the energy functional. The principal axes and boundaries of the teeth provide the information necessary to determine the region to be measured in estimating gingival growth. Finally, voxels corresponding to growth regions are counted to measure the target volume.

MEASUREMENT: ACCOUNTING FOR RELIABILITY IN PERFORMANCE ESTIMATES.

Science.gov (United States)

Waterman, Brian; Sutter, Robert; Burroughs, Thomas; Dunagan, W Claiborne

2014-01-01

When evaluating physician performance measures, physician leaders are faced with the quandary of determining whether departures from expected physician performance measurements represent a true signal or random error. This uncertainty impedes the physician leader's ability and confidence to take appropriate performance improvement actions based on physician performance measurements. Incorporating reliability adjustment into physician performance measurement is a valuable way of reducing the impact of random error in the measurements, such as those caused by small sample sizes. Consequently, the physician executive has more confidence that the results represent true performance and is positioned to make better physician performance improvement decisions. Applying reliability adjustment to physician-level performance data is relatively new. As others have noted previously, it's important to keep in mind that reliability adjustment adds significant complexity to the production, interpretation and utilization of results. Furthermore, the methods explored in this case study only scratch the surface of the range of available Bayesian methods that can be used for reliability adjustment; further study is needed to test and compare these methods in practice and to examine important extensions for handling specialty-specific concerns (e.g., average case volumes, which have been shown to be important in cardiac surgery outcomes). Moreover, it's important to note that the provider group average as a basis for shrinkage is one of several possible choices that could be employed in practice and deserves further exploration in future research. With these caveats, our results demonstrate that incorporating reliability adjustment into physician performance measurements is feasible and can notably reduce the incidence of "real" signals relative to what one would expect to see using more traditional approaches. A physician leader who is interested in catalyzing performance improvement

A Multi-objective PMU Placement Method Considering Observability and Measurement Redundancy using ABC Algorithm

Directory of Open Access Journals (Sweden)

KULANTHAISAMY, A.

2014-05-01

Full Text Available This paper presents a Multi- objective Optimal Placement of Phasor Measurement Units (MOPP method in large electric transmission systems. It is proposed for minimizing the number of Phasor Measurement Units (PMUs for complete system observability and maximizing the measurement redundancy of the system, simultaneously. The measurement redundancy means that number of times a bus is able to monitor more than once by PMUs set. A higher level of measurement redundancy can maximize the total system observability and it is desirable for a reliable power system state estimation. Therefore, simultaneous optimization of the two conflicting objectives are performed using a binary coded Artificial Bee Colony (ABC algorithm. The complete observability of the power system is first prepared and then, single line loss contingency condition is considered to the main model. The efficiency of the proposed method is validated on IEEE 14, 30, 57 and 118 bus test systems. The valuable approach of ABC algorithm is demonstrated in finding the optimal number of PMUs and their locations by comparing the performance with earlier works.

Measured Polarized Spectral Responsivity of JPSS J1 VIIRS Using the NIST T-SIRCUS

Science.gov (United States)

McIntire, Jeff; Young, James B.; Moyer, David; Waluschka, Eugene; Xiong, Xiaoxiong

2015-01-01

Recent pre-launch measurements performed on the Joint Polar Satellite System (JPSS) J1 Visible Infrared Imaging Radiometer Suite (VIIRS) using the National Institute of Standards and Technology (NIST) Traveling Spectral Irradiance and Radiance Responsivity Calibrations Using Uniform Sources (T-SIRCUS) monochromatic source have provided wavelength dependent polarization sensitivity for select spectral bands and viewing conditions. Measurements were made at a number of input linear polarization states (twelve in total) and initially at thirteen wavelengths across the bandpass (later expanded to seventeen for some cases). Using the source radiance information collected by an external monitor, a spectral responsivity function was constructed for each input linear polarization state. Additionally, an unpolarized spectral responsivity function was derived from these polarized measurements. An investigation of how the centroid, bandwidth, and detector responsivity vary with polarization state was weighted by two model input spectra to simulate both ground measurements as well as expected on-orbit conditions. These measurements will enhance our understanding of VIIRS polarization sensitivity, improve the design for future flight models, and provide valuable data to enhance product quality in the post-launch phase.

Refining Measures for Assessing Problematic/Addictive Digital Gaming Use in Clinical and Research Settings.

Science.gov (United States)

Faust, Kyle; Faust, David

2015-08-12

Problematic or addictive digital gaming (including all types of electronic devices) can and has had extremely adverse impacts on the lives of many individuals across the world. The understanding of this phenomenon, and the effectiveness of treatment design and monitoring, can be improved considerably by continuing refinement of assessment tools. The present article briefly overviews tools designed to measure problematic or addictive use of digital gaming, the vast majority of which are founded on the Diagnostic and Statistical Manual of Mental Disorders (DSM) criteria for other addictive disorders, such as pathological gambling. Although adapting DSM content and strategies for measuring problematic digital gaming has proven valuable, there are some potential issues with this approach. We discuss the strengths and limitations of current methods for measuring problematic or addictive gaming and provide various recommendations that might help in enhancing or supplementing existing tools, or in developing new and even more effective tools.

Measurement of 37Ar to support technology for On-Site Inspection under the Comprehensive Nuclear-Test-BanTreaty

Science.gov (United States)

Aalseth, C. E.; Day, A. R.; Haas, D. A.; Hoppe, E. W.; Hyronimus, B. J.; Keillor, M. E.; Mace, E. K.; Orrell, J. L.; Seifert, A.; Woods, V. T.

2011-10-01

On-Site Inspection (OSI) is a key component of the verification regime for the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Measurements of radionuclide isotopes created by an underground nuclear explosion are a valuable signature of a Treaty violation. Argon-37 is produced by neutron interaction with calcium in soil, 40Ca( n, α) 37Ar. For OSI, the 35-day half-life of 37Ar provides both high specific activity and sufficient time for completion of an inspection before decay limits sensitivity. This paper presents a low-background internal-source gas proportional counter with an 37Ar measurement sensitivity level equivalent to 45 mBq/SCM in wholeair.

An Automated and Continuous Plant Weight Measurement System for Plant Factory.

Science.gov (United States)

Chen, Wei-Tai; Yeh, Yu-Hui F; Liu, Ting-Yu; Lin, Ta-Te

2016-01-01

In plant factories, plants are usually cultivated in nutrient solution under a controllable environment. Plant quality and growth are closely monitored and precisely controlled. For plant growth evaluation, plant weight is an important and commonly used indicator. Traditional plant weight measurements are destructive and laborious. In order to measure and record the plant weight during plant growth, an automated measurement system was designed and developed herein. The weight measurement system comprises a weight measurement device and an imaging system. The weight measurement device consists of a top disk, a bottom disk, a plant holder and a load cell. The load cell with a resolution of 0.1 g converts the plant weight on the plant holder disk to an analog electrical signal for a precise measurement. The top disk and bottom disk are designed to be durable for different plant sizes, so plant weight can be measured continuously throughout the whole growth period, without hindering plant growth. The results show that plant weights measured by the weight measurement device are highly correlated with the weights estimated by the stereo-vision imaging system; hence, plant weight can be measured by either method. The weight growth of selected vegetables growing in the National Taiwan University plant factory were monitored and measured using our automated plant growth weight measurement system. The experimental results demonstrate the functionality, stability and durability of this system. The information gathered by this weight system can be valuable and beneficial for hydroponic plants monitoring research and agricultural research applications.

An Automated and Continuous Plant Weight Measurement System for Plant Factory

Directory of Open Access Journals (Sweden)

Wei-Tai eChen

2016-03-01

Full Text Available In plant factories, plants are usually cultivated in nutrient solution under a controllable environment. Plant quality and growth are closely monitored and precisely controlled. For plant growth evaluation, plant weight is an important and commonly used indicator. Traditional plant weight measurements are destructive and laborious. In order to measure and record the plant weight during plant growth, an automated measurement system was designed and developed herein. The weight measurement system comprises a weight measurement device and an imaging system. The weight measurement device consists of a top disk, a bottom disk, a plant holder and a load cell. The load cell with a resolution of 0.1 g converts the plant weight on the plant holder disk to an analogue electrical signal for a precise measurement. The top disk and bottom disk are designed to be durable for different plant sizes, so plant weight can be measured continuously throughout the whole growth period, without hindering plant growth. The results show that plant weights measured by the weight measurement device are highly correlated with the weights estimated by the stereo-vision imaging system; hence, plant weight can be measured by either method. The weight growth of selected vegetables growing in the National Taiwan University plant factory were monitored and measured using our automated plant growth weight measurement system. The experimental results demonstrate the functionality, stability and durability of this system. The information gathered by this weight system can be valuable and beneficial for hydroponic plants monitoring research and agricultural research applications.

When demand accelerates demand : Trailing the bandwagon

NARCIS (Netherlands)

van Herpen, E.; Pieters, R.; Zeelenberg, M.

2009-01-01

Consumers generally prefer scarce products, which has been related to their exclusiveness. Currently scarce products, however, are not necessarily exclusive, but could be scarce because many other consumers previously bought them. We propose that consumers also prefer scarce products in this

When demand accelerates demand: Trailing the bandwagon

NARCIS (Netherlands)

Herpen, van E.; Pieters, F.G.M.; Zeelenberg, M.

2009-01-01

Consumers generally prefer scarce products, which has been related to their exclusiveness. Currently scarce products, however, are not necessarily exclusive, but could be scarce because many other consumers previously bought them. We propose that consumers also prefer scarce products in this

Antimicrobial activity of Xylopia aethiopica, Aframomum melegueta ...

African Journals Online (AJOL)

uwerhiavwe

2013-03-28

Mar 28, 2013 ... Moderately ripped orange fruits were bought from new market in .... the spice extract with other safe treatments such as car- ... 49(7):2019-2023. ... Tech. Rep. 67. Nwinyi OC, Nwodo CS, Olayinka AO, Ikpo CO, Ogunniran KO ...

Determination of multi element levels in leaves and herbal teas from ...

African Journals Online (AJOL)

, Sr and Zn) contained in 18 herbal tea samples that had been bought from local markets where different parts of plants (leaves or flowers) are consumed especially for medical purposes in Turkey by ICP-OES. The validity of the analytical ...

09 Odhiambo 03.pmd

African Journals Online (AJOL)

hond

2007-04-07

Apr 7, 2007 ... businesses and industries and departed, the government bought some .... those like Maina and Meja who try to live by the moral expectations of the society .... Most importantly, though, they touch on the issue of the alienated ...

A novel noninvasive method for measuring fatigability of the quadriceps muscle in noncooperating healthy subjects

DEFF Research Database (Denmark)

Poulsen, Jesper Brøndum; Rose, Martin Høyer; Møller, Kirsten

2015-01-01

days, nonvoluntary isometric contractions (twitch and tetanic) of the quadriceps femoris muscle evoked by transcutaneous electrical muscle stimulation were recorded in twelve healthy adults. For tetanic contractions, the Fatigue Index (ratio of peak torque values) and the slope of the regression line...... of peak torque values were primary outcome measures. For twitch contractions, maximum peak torque and rise time were calculated. Relative (intraclass correlation, ICC3.1) and absolute (standard error of measurement, SEM) reliability were assessed and minimum detectable change was calculated using a 95...... fatigability of the quadriceps muscle produces reliable results in healthy subjects and may provide valuable data on quantitative changes in muscle working capacity and treatment effects in patients who are incapable of producing voluntary muscle contractions....

SO2 plume height retrieval from direct fitting of GOME-2 backscattered radiance measurements

Science.gov (United States)

van Gent, J.; Spurr, R.; Theys, N.; Lerot, C.; Brenot, H.; Van Roozendael, M.

2012-04-01

The use of satellite measurements for SO2 monitoring has become an important aspect in the support of aviation control. Satellite measurements are sometimes the only information available on SO2 concentrations from volcanic eruption events. The detection of SO2 can furthermore serve as a proxy for the presence of volcanic ash that poses a possible hazard to air traffic. In that respect, knowledge of both the total vertical column amount and the effective altitude of the volcanic SO2 plume is valuable information to air traffic control. The Belgian Institute for Space Aeronomy (BIRA-IASB) hosts the ESA-funded Support to Aviation Control Service (SACS). This system provides Volcanic Ash Advisory Centers (VAACs) worldwide with near real-time SO2 and volcanic ash data, derived from measurements from space. We present results from our algorithm for the simultaneous retrieval of total vertical columns of O3 and SO2 and effective SO2 plume height from GOME-2 backscattered radiance measurements. The algorithm is an extension to the GODFIT direct fitting algorithm, initially developed at BIRA-IASB for the derivation of improved total ozone columns from satellite data. The algorithm uses parameterized vertical SO2 profiles which allow for the derivation of the peak height of the SO2 plume, along with the trace gas total column amounts. To illustrate the applicability of the method, we present three case studies on recent volcanic eruptions: Merapi (2010), Grímsvotn (2011), and Nabro (2011). The derived SO2 plume altitude values are validated with the trajectory model FLEXPART and with aerosol altitude estimations from the CALIOP instrument on-board the NASA A-train CALIPSO platform. We find that the effective plume height can be obtained with a precision as fine as 1 km for moderate and strong volcanic events. Since this is valuable information for air traffic, we aim at incorporating the plume height information in the SACS system.

A compact low energy multibeam gamma-ray densitometer for pipe-flow measurements

International Nuclear Information System (INIS)

Tjugum, Stein-Arild; Frieling, Joop; Johansen, Geir Anton

2002-01-01

A compact low-energy multibeam gamma-ray densitometer for oil/water/gas pipe-flow measurement has been built at the University of Bergen. The instrument consists of one Am-241 source and three detectors, all collimated and embedded in the pipe wall. Only the 59.5 keV radiation energy of the source is utilized. Two of the detectors measure transmitted radiation across the pipe flow, and one measure scattered radiation at a 90 degree sign angle. The purpose of the multibeam measurement geometry is to acquire flow regime information and to reduce the flow regime dependency of the gas volume fraction (GVF) measurements. The measurement of scattered radiation enables the dual modality densitometry (DMD) measurement principle to be exploited. Its basic principle is to combine the measurement of scattered and transmitted radiation in order to obtain salinity independent GVF measurements. The salinity dependency is otherwise strongly significant when using low-energy radiation. It is also possible to measure the salinity by using this principle. The instrument is a laboratory prototype, and it has been used for characterising the measurement principle and to test different detector alternatives. The testing of the instrument includes static tests on plastic phantoms, tests on simulated water/gas flow and three phase flow loop tests. Both the multibeam measurement principle and the DMD principle have been verified to provide valuable information. This paper presents the physics behind, experimental results and an evaluation of the system

More valuable as petrochemical feedstock

International Nuclear Information System (INIS)

Ramachandran, R.

2005-01-01

The problems facing the North American petrochemical industry were discussed with particular reference to the fact that high North American prices present a challenge to competitiveness in a globally traded market. A background of Dow Canada was provided, including details of its upgrading of natural gas liquids that would otherwise be combusted for electrical power generation. The value of the petrochemical industry was outlined, with details of employment, manufacturing output and exports. Alberta's relationship to the natural gas industry was reviewed. The role of petrochemicals as a nexus for bridging the resource sector with manufacturing, retail and transportation was discussed. The historic correlation between world Gross Domestic Product (GDP) and ethylene demand was presented. It was noted that the petrochemical industry currently competes with power generators for smaller volumes of natural gas liquids. As a highly energy intensive industry, inequities in gas pipeline haul charges and even small increases in gas prices has compromised the success of the petrochemical industry. It was noted that while crude oil is a globally traded commodity, natural gas liquids are generally traded at a more localized level, and factors that helped build the petrochemical industry and are now inhibiting growth. Ethane is the primary feedstock in the petrochemical industry. High natural gas prices affected the industry on two levels: volatility in a weakening industry and higher prices on primary feedstocks. It was estimated that changes in current trends were likely to take place in 5 to 10 years, following Northern gas developments. It was estimated that more than 50 per cent of new capacity investment in ethylene plants would take place in the Middle East in the next 5 years. No new plants are planned in Canada. It was concluded that low-cost feedstock advantages, as well as alternative feedstocks and the sustainment of a healthy industry are necessary for the petrochemical industry's near-term future success. It was also noted that Alberta's hydrocarbon resources are strong enough to support a growing petrochemical industry. It was cautioned that using Alberta's gas to extract oil was not a prudent use of resource. Rather, energy conservation and increased gas supply would restore Alberta's competitive advantages. It was also emphasized that policies that increase the supply of natural gas by enabling exploration are necessary. tabs, figs

Discrete choice experiments to measure consumer preferences for health and healthcare.

Science.gov (United States)

Viney, Rosalie; Lancsar, Emily; Louviere, Jordan

2002-08-01

To investigate the impact of health policies on individual well-being, estimate the value to society of new interventions or policies, or predict demand for healthcare, we need information about individuals' preferences. Economists usually use market-based data to analyze preferences, but such data are limited in the healthcare context. Discrete choice experiments are a potentially valuable tool for elicitation and analysis of preferences and thus, for economic analysis of health and health programs. This paper reviews the use of discrete choice experiments to measure consumers' preferences for health and healthcare. The paper provides an overview of the approach and discusses issues that arise when using discrete choice experiments to assess individuals' preferences for health and healthcare.

A method for measuring fatty acid oxidation in C. elegans

DEFF Research Database (Denmark)

Elle, Ida Coordt; Rødkær, Steven Vestergaard; Fredens, Julius

2012-01-01

The nematode C. elegans has during the past decade proven to be a valuable model organism to identify and examine molecular mechanisms regulating lipid storage and metabolism. While the primary approach has been to identify genes and pathways conferring alterations in lipid accumulation, only a few...... recent studies have recognized the central role of fatty acid degradation in cellular lipid homeostasis. In the present study, we show how complete oxidation of fatty acids can be determined in live C. elegans by examining oxidation of tritium-labeled fatty acids to tritiated H2O that can be measured......, the present methodology can be used to delineate the role of specific genes and pathways in the regulation of β-oxidation in C. elegans....

Techniques for measuring red cell, platelet, and WBC survival

International Nuclear Information System (INIS)

Mayer, K.; Freeman, J.E.

1986-01-01

Blood cell survival studies yield valuable information concerning production and destruction of cells circulating in the bloodstream. Methodologies for the measurement of red cell survival include nonisotopic methods such as differential agglutination and hemolysis. The isotopic label may be radioactive or, if not, will require availability of a mass spectrograph. These methods fall into two categories, one where red cells of all ages are labeled ( 51 Cr, DFP32, etc.) and those employing a cohort label of newly formed cells ( 14 C glycine, 75 Se methionine, etc.). Interpretation of results for methodology employed and mechanism of destruction, random or by senescence, are discussed. A similar approach is presented for platelet and leukocyte survival studies. The inherent difficulties and complications of sequestration, storage, and margination of these cells are emphasized and discussed. 38 references

A theoretical study of the possibilities for localization of anomalous density distribution in rock by means of underground cosmic ray muon intensity measurements

International Nuclear Information System (INIS)

Jacobsson, L.; Joensson, G.; Kristiansson, K.; Malmqvist, L.

1977-05-01

The possibilities for in situ rock density determinations by means of sub-surface cosmic ray muon intensity measurements have been studied. The calculations are based on an hypothetical scintillation counter telescope intended for registration in a gallery. It is shown that fairly accurate density measurements are possible and that a certain spatial resolution can be achieved. The measurements are only influenced by the density distribution in the forward direction which can make the muon technique valuable in connection with gravity measurements. Different prospecting situations have been studied. It is found that in certain prospecting situations the accuracy needed for the indication of a massive ore body can be reached within an acceptable registration period. (Auth.)

Coping with radiation measurement in Hippo area of Marumori Town, Miyagi Prefecture

International Nuclear Information System (INIS)

Yoshizawa, Takeshi

2013-01-01

The series is to report how general people, who are not at all radiological experts, have faced and understood the problems and tasks of radiation given by the Fukushima Daiichi Nuclear Power Plant Accident (Mar. 2011). The section 1 reports the process of its title and present status of the Hippo area. The area localizes at the most southern zone of Miyagi prefecture, borders on Fukushima and is 50 km distant from the Plant. Rapidly after the Accident, they required the precise measurement of ambient dose in the area, but it was 2 months later that it was conducted by Marumori Town office. The dose was found to much exceed 1 mc-Sv/h, being far higher than the dose reported by Miyagi prefecture. The monitoring was restricted at ten-odd fixed sites in the area as large as 75 km 2 , which was unsatisfactory for all residents who lived in houses scattered among hills. Accordingly, the author's area association bought GM-counters through internet, lent them, and also made a map of dose distribution at 137 spots along the roads covering the whole area to be passed out to all houses in July. This conceivably helped for them to learn their positioning in the radiation environment and how to live. In addition, the association could get (July 2012) an instrument (ATOMTEX, AT1320A, made in Belarus) for food monitoring on donations from past and present residents as the Town office, where the monitoring had been done, was too far from the area and had refused the economical assistance. The use of the machine was (still, is) difficult, and the speculation of data, sometimes more: however, the food monitoring is now essential for residents to live safely and easily. The author thinks that self-help is not desirable and hopes the wider means should be taken beyond the administrative border. (T.T.)

Comparative study of chance coincidence correction in measuring 223Ra and 224Ra by delay coincidence method

International Nuclear Information System (INIS)

Yan Yongjun; Huang Derong; Zhou Jianliang; Qiu Shoukang

2013-01-01

The delay coincidence measurement of 220 Rn and 219 Rn has been proved to be a valid indirect method for measuring 224 Ra and 223 Ra extracted from natural water, which can provide valuable information on estuarine/ocean mixing, submarine groundwater discharge, and water/soil interactions. In practical operation chance coincidence correction must be considered, mostly Moore's correction method, but Moore's and Giffin's methods were incomplete in some ways. In this paper the modification (method 1) and a new chance coincidence correction formula (method 2) were provided. Experiments results are presented to demonstrate the conclusions. The results show that precision is improved while counting rate is less than 70 min- 1 . (authors)

A New, Noninvasive Method of Measuring Impaired Pulmonary Gas Exchange in Lung Disease: An Outpatient Study.

Science.gov (United States)

West, John B; Crouch, Daniel R; Fine, Janelle M; Makadia, Dipen; Wang, Daniel L; Prisk, G Kim

2018-02-13

It would be valuable to have a noninvasive method of measuring impaired pulmonary gas exchange in patients with lung disease and thus reduce the need for repeated arterial punctures. This study reports the results of using a new test in a group of outpatients attending a pulmonary clinic. Inspired and expired partial pressure of oxygen (PO 2 ) and Pco 2 are continually measured by small, rapidly responding analyzers. The arterial PO 2 is calculated from the oximeter blood oxygen saturation level and the oxygen dissociation curve. The PO 2 difference between the end-tidal gas and the calculated arterial value is called the oxygen deficit. Studies on 17 patients with a variety of pulmonary diseases are reported. The mean ± SE oxygen deficit was 48.7 ± 3.1 mm Hg. This finding can be contrasted with a mean oxygen deficit of 4.0 ± 0.88 mm Hg in a group of 31 normal subjects who were previously studied (P gas in determining ventilation-perfusion ratio inequality. This factor is largely ignored in the classic index of impaired pulmonary gas exchange using the ideal alveolar PO 2 to calculate the alveolar-arterial oxygen gradient. The results previously reported in normal subjects and the present studies suggest that this new noninvasive test will be valuable in assessing abnormal gas exchange in the clinical setting. Copyright © 2018 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.

Measurement of Physical and Hydraulic Properties of Organic Soil Using Computed Tomographic Imagery

Science.gov (United States)

Blais, K. E.; Quinton, W. L.; Heck, R. J.; Price, J. S.; Schmidt, M. G.

2005-12-01

The Lower Liard River valley is located within the continental northern boreal region and the zone of discontinuous permafrost. Lying in the centre of the Mackenzie basin, this valley is an extensive flat headwater region with a high density of open water and peatlands. Several standard methods of measuring the physical properties of organic soils exist, although many of them have several drawbacks that limit their use. Organic soils, in particular, have unique properties that require special attention to ensure that the measured hydrological characteristics are represented as they exist in nature. The goal of this research was to devise an improved method of analyzing and measuring the physical and hydraulic properties of organic soil using MicroCT imagery. Specifically, this research seeks to determine if two and three-dimensional images of peat can be used to accurately characterize air-filled porosity, active porosity, pore size distribution, pore saturated area and capillarity of porous Sphagnum cells. Results indicate that measurements derived from these images are consistent with current literature. They also suggest that this non-destructive method is a valuable tool for measuring peat physical and hydraulic properties and that there is potential for additional research using CT technology.

On-Site Measurements for Voltage Unbalance Studies Associated with the AC Railway Operation

DEFF Research Database (Denmark)

Stamatopoulos, Athanasios; Silva, Filipe Miguel Faria da; Bak, Claus Leth

2017-01-01

unbalance with regards to traction loads has been augmented since the decision to expand the electric railway. Towards this direction, and on the occasion of a newly built electrified line, voltage unbalance measurements were carried out and are presented in this paper. The information from the extracted......On-site measurements in Electrical Power Systems can provide valuable information about the performance of the network and also, can be of great assistance to the validation and assessment of simulation models developed for power system studies. Lately, the noticeable increase of non......-conventional types of loads, such as the AC railway, has raised concerns regarding the secure operation of power transmission networks. This renders the monitoring and reporting of various aspects of system’s power quality even more necessary. For the Danish transmission grid, in particular, the relevance of voltage...

Which Criteria are More Valuable in Defining Hemodynamic Significance of Patent Ductus Arteriosus in Premature Infants? Respiratory or Echocardiographic?

Directory of Open Access Journals (Sweden)

İrfan Oğuz Şahin

2017-03-01

Full Text Available Aim: Patent ductus arteriosus (PDA is a frequent health problem in premature infants. Pharmacologic closure is recommended only for hemodynamically significant PDA (hsPDA that is defined according to the clinical and echocardiographic criteria. The aim of this study was to explore the value of commonly used criteria in defining hsPDA and predicting the required number of courses of ibuprofen treatment to close PDA in premature infants. Methods: Sixty premature infants with a gestational age of ≤33 weeks were evaluated prospectively. Clinical and echocardiographic criteria [O2 requirement, ductus diameter (DD and left atrial-to-aortic root diameter ratio (LA:Ao] were used to define hsPDA. Clinical improvement after pharmacologic closure of PDA and association between the criteria and required number of ibuprofen courses were investigated. Results: O2 requirement decreased by PDA closure but was not different between patients with hsPDA and the others with PDA. Also, O2 requirement was not found to be associated with required number of ibuprofen courses. DD and LA:Ao were greater in patients with hsPDA. DD was found to be associated with required number of courses of ibuprofen treatment. Conclusion: Although there was an improvement in O2 requirement with PDA closure, echocardiographic criteria were found to be more valuable in defining hsPDA. DD should also be used to estimate the duration of treatment.

Direct mass measurements of light neutron-rich nuclei using fast recoil spectrometers

International Nuclear Information System (INIS)

Vieira, D.J.; Wouters, J.M.

1987-01-01

Extensive new mass measurement capabilities have evolved with the development of recoil spectrometers. In the Z = 3 to 9 neutron-rich region alone, 12 neutron-rich nuclei have been determined for the first time by the fast-recoil direct mass measurement method. A recent experiment using the TOFI spectrometer illustrates this technique. A systematic investigation of nuclei that lie along or near the neutron-drip line has provided a valuable first glimpse into the nuclear structure of such nuclei. No evidence for a large single-particle energy gap at N = 14 is observed; however, a change in the two-neutron separation model calculations, and is interpreted in terms of the smaller 1s/sub 1/2/ - 1s/sub 1/2/ interaction compared to that of the 0d/sub 5/2/ - 0d/sub 5/2/ neutron-neutron interaction. 18 refs., 7 figs., 1 tab

Electrochemistry in light water reactors reference electrodes, measurement, corrosion and tribocorrosion issues

CERN Document Server

Bosch, R -W; Celis, Jean-Pierre

2007-01-01

There has long been a need for effective methods of measuring corrosion within light water nuclear reactors. This important volume discusses key issues surrounding the development of high temperature reference electrodes and other electrochemical techniques. The book is divided into three parts with part one reviewing the latest developments in the use of reference electrode technology in both pressurised water and boiling water reactors. Parts two and three cover different types of corrosion and tribocorrosion and ways they can be measured using such techniques as electrochemical impedance spectroscopy. Topics covered across the book include in-pile testing, modelling techniques and the tribocorrosion behaviour of stainless steel under reactor conditions. Electrochemistry in light water reactors is a valuable reference for all those concerned with corrosion problems in this key technology for the power industry. Discusses key issues surrounding the development of high temperature reference eletrodes A valuab...

Videodefaecography combined with measurement of the anorectal angle and of perineal descent

International Nuclear Information System (INIS)

Skomorowska, E.; Henrichsen, S.; Christiansen, J.; Hegedues, V.; Glostrup Sygehus, Copenhagen

1987-01-01

Cineradiographic defaecography combined with measurement of the anorectal angle and descent of the pelvic floor is proposed. The method used in 73 women gave valuable information in 48 patients who complained of anal incompetence, rectal tenesmus, and chronic constipation. In these patients, high and low rectal intussusception, rectocele, and pathologic movement of the pelvic floor were detected. Some of these phenomena could only be diagnosed by the radiologic method here described. Quantitations of the anorectal angle and descent of the pelvic floor placed the group with constipation halfway between normal individuals and those with anal incompetence. The value of this finding is discussed. Recent improvements in anorectal surgery often make videodefaecography decisive for the choice of the optimal operative method. Therefore, videodefaecography together with measurement of the anorectal angle and pelvic floor descent is recommended whenever anorectal surgery for correction of functional disturbances is contemplated. (orig.)

Climate change : observations on the potential role of carbon offsets in climate change legislation

Science.gov (United States)

2009-03-05

Currently, carbon offsets are generated, bought, and sold in two types of markets. In markets such as the United States, which does not have binding limits on emissions, the market is referred to as a voluntary market. Conversely, in the European Uni...

攀岩——最值得考虑的事%Mountain climbing——best to think it through

Institute of Scientific and Technical Information of China (English)

无

2007-01-01

@@ As I sank, knee-deep, into another snowdrift two things simultaneously(自然地) occurred to (发生)me. Firstly, my boots, which I bought for ￡25 from asports discount shop on Oxford Street, were definitely not water-proof (防水).

Finding a Balance between the Dimensions of Economy and Art——The numerous postures of Chinese dance in the era of consumption

Institute of Scientific and Technical Information of China (English)

WangSen[1

2016-01-01

In the era of consumption, dance as well as other arts has become merchandise that can be bought, sold or exchanged freely. When various dancing works quietly intrude into our life, they also imperceptibly bring about an abrupt and absurd sense of alienation.

Staking a Claim in Cambodia's Highlands

International Development Research Centre (IDRC) Digital Library (Canada)

Logging trucks were soon rumbling in. So were settlers and migrants displaced from other areas, as well as business people who rapidly bought land to grow plantation and ... Not only is the forest one of their main sources of food and income ...

Effects of fermentation conditions on valuable products of ethanolic fungus Mucor indicus

Directory of Open Access Journals (Sweden)

Shabnam Sharifyazd

2017-11-01

Conclusions: It is not possible to have the maximum amounts of the products simultaneously. The fermentation conditions and composition of culture media determine the product yields. Carbon source type and the addition of nitrogen source are among the most influencing factors on the product yields. Moreover, all measured products were made with higher yields in cultivation on glucose, except glucosamine, which was produced with higher yields on xylose.

The Internet of Names: A DNS Big Dataset - Actively Measuring 50% of the Entire DNS Name Space, Every Day

OpenAIRE

van Rijswijk, Roland M.; Jonker, Mattijs; Sperotto, Anna; Pras, Aiko

2015-01-01

The Domain Name System (DNS) is part of the core infrastructure of the Internet. Tracking changes in the DNS over time provides valuable information about the evolution of the Internet’s infrastructure. Until now, only one large-scale approach to perform these kinds of measurements existed, passive DNS (pDNS). While pDNS is useful for applications like tracing security incidents, it does not provide sufficient information to reliably track DNS changes over time. We use a complementary approac...

Ab Interno Trabeculectomy With the Trabectome as a Valuable Therapeutic Option for Failed Filtering Blebs.

Science.gov (United States)

Wecker, Thomas; Neuburger, Matthias; Bryniok, Laura; Bruder, Kathrin; Luebke, Jan; Anton, Alexandra; Jordan, Jens F

2016-09-01

. The number of necessary IOP lowering medication drops at first, but seems to reach preoperative values after 20 months of follow-up. Trabectome surgery should be considered as a valuable escape procedure for patients with failed filtering blebs and uncontrolled IOP.

Refining Measures for Assessing Problematic/Addictive Digital Gaming Use in Clinical and Research Settings

Directory of Open Access Journals (Sweden)

Kyle Faust

2015-08-01

Full Text Available Problematic or addictive digital gaming (including all types of electronic devices can and has had extremely adverse impacts on the lives of many individuals across the world. The understanding of this phenomenon, and the effectiveness of treatment design and monitoring, can be improved considerably by continuing refinement of assessment tools. The present article briefly overviews tools designed to measure problematic or addictive use of digital gaming, the vast majority of which are founded on the Diagnostic and Statistical Manual of Mental Disorders (DSM criteria for other addictive disorders, such as pathological gambling. Although adapting DSM content and strategies for measuring problematic digital gaming has proven valuable, there are some potential issues with this approach. We discuss the strengths and limitations of current methods for measuring problematic or addictive gaming and provide various recommendations that might help in enhancing or supplementing existing tools, or in developing new and even more effective tools.

Improved method for measurement of dietary fiber as non-starch polysaccharides in plant foods.

Science.gov (United States)

Englyst, H N; Cummings, J H

1988-01-01

A method is described that allows rapid estimation of total, soluble, and insoluble dietary fiber as the non-starch polysaccharides (NSP) in plant foods. It is a modification of an earlier, more complex procedure. Starch is completely removed enzymatically, and NSP is measured as the sum of its constituent sugars released by acid hydrolysis. The sugars may, in turn, be measured by gas chromatography (GC), giving values for individual monosaccharides, or more rapidly by colorimetry. Both GC and colorimetry are suitable for routine measurement of total, soluble, and insoluble dietary fiber in cereals, fruits, and vegetables. Values obtained are not affected by food processing so the dietary fiber content of various processed foods and mixed diets can be calculated simply from knowing the amount in the raw materials. The additional information obtained by GC analysis is valuable in the interpretation of physiological studies and in epidemiology where disease is related to type and amount of dietary fiber.

Modified ultrafast thermometer UFT-M and temperature measurements during Physics of Stratocumulus Top (POST

Directory of Open Access Journals (Sweden)

W. Kumala

2013-08-01

Full Text Available A modified UFT-M version of the ultrafast airborne thermometer UFT, aimed at in-cloud temperature measurements, was designed for the Physics of Stratocumulus Top (POST field campaign. Improvements in its construction resulted in the sensor's increased reliability, which provided valuable measurements in 15 of the 17 flights. Oversampling the data allowed for the effective correction of the artefacts resulting from the interference with electromagnetic transmissions from on-board avionic systems and the thermal noise resulting from the sensor construction. The UFT-M records, when averaged to the 1.4 and 55 m resolutions, compared to the similar records of a thermometer in a Rosemount housing, indicate that the housing distorts even low-resolution airborne temperature measurements. Data collected with the UFT-M during the course of POST characterise the thermal structure of stratocumulus and capping inversion with the maximum resolution of ~1 cm. In this paper, examples of UFT-M records are presented and discussed.

Multiscale Pore Throat Network Reconstruction of Tight Porous Media Constrained by Mercury Intrusion Capillary Pressure and Nuclear Magnetic Resonance Measurements

Science.gov (United States)

Xu, R.; Prodanovic, M.

2017-12-01

Due to the low porosity and permeability of tight porous media, hydrocarbon productivity strongly depends on the pore structure. Effective characterization of pore/throat sizes and reconstruction of their connectivity in tight porous media remains challenging. Having a representative pore throat network, however, is valuable for calculation of other petrophysical properties such as permeability, which is time-consuming and costly to obtain by experimental measurements. Due to a wide range of length scales encountered, a combination of experimental methods is usually required to obtain a comprehensive picture of the pore-body and pore-throat size distributions. In this work, we combine mercury intrusion capillary pressure (MICP) and nuclear magnetic resonance (NMR) measurements by percolation theory to derive pore-body size distribution, following the work by Daigle et al. (2015). However, in their work, the actual pore-throat sizes and the distribution of coordination numbers are not well-defined. To compensate for that, we build a 3D unstructured two-scale pore throat network model initialized by the measured porosity and the calculated pore-body size distributions, with a tunable pore-throat size and coordination number distribution, which we further determine by matching the capillary pressure vs. saturation curve from MICP measurement, based on the fact that the mercury intrusion process is controlled by both the pore/throat size distributions and the connectivity of the pore system. We validate our model by characterizing several core samples from tight Middle East carbonate, and use the network model to predict the apparent permeability of the samples under single phase fluid flow condition. Results show that the permeability we get is in reasonable agreement with the Coreval experimental measurements. The pore throat network we get can be used to further calculate relative permeability curves and simulate multiphase flow behavior, which will provide valuable

X-ray beam hardening correction for measuring density in linear accelerator industrial computed tomography

International Nuclear Information System (INIS)

Zhou Rifeng; Wang Jue; Chen Weimin

2009-01-01

Due to X-ray attenuation being approximately proportional to material density, it is possible to measure the inner density through Industrial Computed Tomography (ICT) images accurately. In practice, however, a number of factors including the non-linear effects of beam hardening and diffuse scattered radiation complicate the quantitative measurement of density variations in materials. This paper is based on the linearization method of beam hardening correction, and uses polynomial fitting coefficient which is obtained by the curvature of iron polychromatic beam data to fit other materials. Through theoretical deduction, the paper proves that the density measure error is less than 2% if using pre-filters to make the spectrum of linear accelerator range mainly 0.3 MeV to 3 MeV. Experiment had been set up at an ICT system with a 9 MeV electron linear accelerator. The result is satisfactory. This technique makes the beam hardening correction easy and simple, and it is valuable for measuring the ICT density and making use of the CT images to recognize materials. (authors)

Active landslide monitoring using remote sensing data, GPS measurements and cameras on board UAV

Science.gov (United States)

Nikolakopoulos, Konstantinos G.; Kavoura, Katerina; Depountis, Nikolaos; Argyropoulos, Nikolaos; Koukouvelas, Ioannis; Sabatakakis, Nikolaos

2015-10-01

An active landslide can be monitored using many different methods: Classical geotechnical measurements like inclinometer, topographical survey measurements with total stations or GPS and photogrammetric techniques using airphotos or high resolution satellite images. As the cost of the aerial photo campaign and the acquisition of very high resolution satellite data is quite expensive the use of cameras on board UAV could be an identical solution. Small UAVs (Unmanned Aerial Vehicles) have started their development as expensive toys but they currently became a very valuable tool in remote sensing monitoring of small areas. The purpose of this work is to demonstrate a cheap but effective solution for an active landslide monitoring. We present the first experimental results of the synergistic use of UAV, GPS measurements and remote sensing data. A six-rotor aircraft with a total weight of 6 kg carrying two small cameras has been used. Very accurate digital airphotos, high accuracy DSM, DGPS measurements and the data captured from the UAV are combined and the results are presented in the current study.

Essential oils (EOs), pressurized liquid extracts (PLE) and carbon dioxide supercritical fluid extracts (SFE-CO2) from Algerian Thymus munbyanus as valuable sources of antioxidants to be used on an industrial level.

Science.gov (United States)

Bendif, Hamdi; Adouni, Khaoula; Miara, Mohamed Djamel; Baranauskienė, Renata; Kraujalis, Paulius; Venskutonis, Petras Rimantas; Nabavi, Seyed Mohammad; Maggi, Filippo

2018-09-15

The aim of this study was to demonstrate the potential of extracts from Algerian Thymus munbyanus as a valuable source of antioxidants for use on an industrial level. To this end, a study was conducted on the composition and antioxidant activities of essential oils (EOs), pressurized liquid extracts (PLE) and supercritical fluid extracts (SFE-CO 2 ) obtained from Thymus munbyanus subsp. coloratus (TMC) and subsp. munbyanus (TMM). EOs and SFE-CO 2 extracts were analysed by GC-FID and GC×GC-TOFMS revealing significant differences. A successive extraction of the solid SFE-CO 2 residue by PLE extraction with solvents of increasing polarity such as acetone, ethanol and water, was carried out. The extracts were evaluated for total phenolic content by Folin-Ciocalteu assay, while the antioxidant power was assessed by DPPH, FRAP, and ORAC assays. SFE-CO 2 extracts were also analysed for their tocopherol content. The antioxidant activity of PLE extracts was found to be higher than that of SFE-CO 2 extracts, and this increased with solvent polarity (water > ethanol > acetone). Overall, these results support the use of T. munbyanus as a valuable source of substances to be used on an industrial level as preservative agents. Copyright © 2018 Elsevier Ltd. All rights reserved.

Converting the organic fraction of solid waste from the city of Abu Dhabi to valuable products via dark fermentation--Economic and energy assessment.

Science.gov (United States)

Bonk, Fabian; Bastidas-Oyanedel, Juan-Rodrigo; Schmidt, Jens Ejbye

2015-06-01

Landfilling the organic fraction of municipal solid waste (OFMSW) leads to greenhouse gas emissions and loss of valuable resources. Sustainable and cost efficient solutions need to be developed to solve this problem. This study evaluates the feasibility of using dark fermentation (DF) to convert the OFMSW to volatile fatty acids (VFAs), fertilizer and H2. The VFAs in the DF effluent can be used directly as substrate for subsequent bioprocesses or purified from the effluent for industrial use. DF of the OFMSW in Abu Dhabi will be economically sustainable once VFA purification can be accomplished on large scale for less than 15USD/m(3)(effluent). With a VFA minimum selling price of 330 USD/tCOD, DF provides a competitive carbon source to sugar. Furthermore, DF is likely to use less energy than conventional processes that produce VFAs, fertilizer and H2. This makes DF of OFMSW a promising waste treatment technology and biorefinery platform. Copyright © 2015 Elsevier Ltd. All rights reserved.

«THE HIDDEN PEDAGOGY» AS MEANS OF CULTURAL COMMUNICATION AND VALUABLE AND ECONOMIC SOCIALIZATION (ACCORDING TO MATERIALS OF THE VIRTUAL MUSEUM OF GERMANY

Directory of Open Access Journals (Sweden)

Olga Dmitrievna Fedotova

2015-12-01

Full Text Available In this article the problems of using the factors of the forming influence operating outside the standard educational environment in the open sociocultural practice are considered. The characteristic is given to the concept «the hidden pedagogy» which is introduced into scientific circulation abroad at two levels – as the conceptual metaphor and theoretical conceptualization fixing spheres of influence of informal education. It is shown that acquaintance with exhibits expands the idea of visitors of the economic, cultural and valuable orientations dominating in the past on the basis of the analysis of an exposition of the virtual museum of the bookmarks presented in Internet space by collectors from Germany. It is shown that the bookmark for pupils advertizing the examples of behavior directed on accumulation, saving is an indirect, but effective factor of the forming influence. The characteristic of activity of financial institutions and school savings banks on formation of economic installations of the adult and young population is given.

Consumption of single cigarettes and quitting behavior: A longitudinal analysis of Mexican smokers

Science.gov (United States)

2011-01-01

Background Previous cross-sectional research has suggested single cigarettes could either promote or inhibit consumption. The present study aimed to assess the effects of single cigarette availability and consumption on downstream quit behavior. Methods We analyzed population-based, longitudinal data from adult smokers who participated in the 2008 and 2010 administrations of the International Tobacco Control Policy Evaluation Survey in Mexico. Results At baseline, 30% of smokers saw single cigarettes for sale on a daily basis, 17% bought singles at their last purchase, and 7% bought singles daily. Smokers who most frequently purchased singles, both in general and specifically to control their consumption, were no more likely to attempt to quit over the 14 month follow-up period than those who did not purchase singles. Frequency of buying singles to reduce consumption had a non-monotonic association with being quit at followup. The odds of being quit was only statistically significant when comparing those who had not bought singles to reduce consumption with those who had done so on a more irregular basis (AOR = 2.30; 95% CI 1.19, 4.45), whereas those who did so more regularly were no more likely to be quit at followup. Frequency of self-reported urges to smoke upon seeing singles for sale was unassociated with either quit attempts or being quit at followup. Conclusions These results suggest that the relationship between singles consumption and quit behavior is complex, with no clear evidence that singles either promote or inhibit downstream quit behavior. PMID:21352526

Consumption of single cigarettes and quitting behavior: A longitudinal analysis of Mexican smokers

Directory of Open Access Journals (Sweden)

Barnoya Joaquin

2011-02-01

Full Text Available Abstract Background Previous cross-sectional research has suggested single cigarettes could either promote or inhibit consumption. The present study aimed to assess the effects of single cigarette availability and consumption on downstream quit behavior. Methods We analyzed population-based, longitudinal data from adult smokers who participated in the 2008 and 2010 administrations of the International Tobacco Control Policy Evaluation Survey in Mexico. Results At baseline, 30% of smokers saw single cigarettes for sale on a daily basis, 17% bought singles at their last purchase, and 7% bought singles daily. Smokers who most frequently purchased singles, both in general and specifically to control their consumption, were no more likely to attempt to quit over the 14 month follow-up period than those who did not purchase singles. Frequency of buying singles to reduce consumption had a non-monotonic association with being quit at followup. The odds of being quit was only statistically significant when comparing those who had not bought singles to reduce consumption with those who had done so on a more irregular basis (AOR = 2.30; 95% CI 1.19, 4.45, whereas those who did so more regularly were no more likely to be quit at followup. Frequency of self-reported urges to smoke upon seeing singles for sale was unassociated with either quit attempts or being quit at followup. Conclusions These results suggest that the relationship between singles consumption and quit behavior is complex, with no clear evidence that singles either promote or inhibit downstream quit behavior.

Eddy Current Flow Measurements in the FFTF

Energy Technology Data Exchange (ETDEWEB)

Nielsen, Deborah L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Polzin, David L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Omberg, Ronald P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Makenas, Bruce J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2017-02-02

The Fast Flux Test Facility (FFTF) is the most recent liquid metal reactor (LMR) to be designed, constructed, and operated by the U.S. Department of Energy (DOE). The 400-MWt sodium-cooled, fast-neutron flux reactor plant was designed for irradiation testing of nuclear reactor fuels and materials for liquid metal fast breeder reactors. Following shut down of the Clinch River Breeder Reactor Plant (CRBRP) project in 1983, FFTF continued to play a key role in providing a test bed for demonstrating performance of advanced fuel designs and demonstrating operation, maintenance, and safety of advanced liquid metal reactors. The FFTF Program provides valuable information for potential follow-on reactor projects in the areas of plant system and component design, component fabrication, fuel design and performance, prototype testing, site construction, and reactor control and operations. This report provides HEDL-TC-1344, “ECFM Flow Measurements in the FFTF Using Phase-Sensitive Detectors”, March 1979.

Organic reductants based leaching: A sustainable process for the recovery of valuable metals from spent lithium ion batteries.

Science.gov (United States)

Chen, Xiangping; Guo, Chunxiu; Ma, Hongrui; Li, Jiazhu; Zhou, Tao; Cao, Ling; Kang, Duozhi

2018-05-01

It is significant to recover metal values from spent lithium ion batteries (LIBs) for the alleviation or prevention of potential risks towards environmental pollution and public health, as well as for the conservation of valuable metals. Herein a hydrometallurgical process was proposed to explore the possibility for the leaching of different metals from waste cathodic materials (LiCoO 2 ) of spent LIBs using organics as reductant in sulfuric acid medium. According to the leaching results, about 98% Co and 96% Li can be leached under the optimal experimental conditions of reaction temperature - 95 °C, reaction time - 120 min, reductive agent dosage - 0.4 g/g, slurry density - 25 g/L, concentration of sulfuric acid-3 mol/L in H 2 SO 4  + glucose leaching system. Similar results (96% Co and 100% Li) can be obtained in H 2 SO 4  + sucrose leaching system under optimized leaching conditions. Despite a complete leaching of Li (∼100%), only 54% Co can be dissolved in the H 2 SO 4  + cellulose leaching system under optimized leaching conditions. Finally, different characterization methods, including UV-Vis, FT-IR, SEM and XRD, were employed for the tentative exploration of reductive leaching reactions using organic as reductant in sulfuric acid medium. All the leaching and characterization results confirm that both glucose and sucrose are effective reductants during leaching, while cellulose should be further degraded to organics with low molecular weights to achieve a satisfactory leaching performance. Copyright © 2018 Elsevier Ltd. All rights reserved.

Model-assisted measurements of suspension-feeding flow velocities.

Science.gov (United States)

Du Clos, Kevin T; Jones, Ian T; Carrier, Tyler J; Brady, Damian C; Jumars, Peter A

2017-06-01

Benthic marine suspension feeders provide an important link between benthic and pelagic ecosystems. The strength of this link is determined by suspension-feeding rates. Many studies have measured suspension-feeding rates using indirect clearance-rate methods, which are based on the depletion of suspended particles. Direct methods that measure the flow of water itself are less common, but they can be more broadly applied because, unlike indirect methods, direct methods are not affected by properties of the cleared particles. We present pumping rates for three species of suspension feeders, the clams Mya arenaria and Mercenaria mercenaria and the tunicate Ciona intestinalis , measured using a direct method based on particle image velocimetry (PIV). Past uses of PIV in suspension-feeding studies have been limited by strong laser reflections that interfere with velocity measurements proximate to the siphon. We used a new approach based on fitting PIV-based velocity profile measurements to theoretical profiles from computational fluid dynamic (CFD) models, which allowed us to calculate inhalant siphon Reynolds numbers ( Re ). We used these inhalant Re and measurements of siphon diameters to calculate exhalant Re , pumping rates, and mean inlet and outlet velocities. For the three species studied, inhalant Re ranged from 8 to 520, and exhalant Re ranged from 15 to 1073. Volumetric pumping rates ranged from 1.7 to 7.4 l h -1 for M . arenaria , 0.3 to 3.6 l h -1 for M . m ercenaria and 0.07 to 0.97 l h -1 for C . intestinalis We also used CFD models based on measured pumping rates to calculate capture regions, which reveal the spatial extent of pumped water. Combining PIV data with CFD models may be a valuable approach for future suspension-feeding studies. © 2017. Published by The Company of Biologists Ltd.

Cheese whey valorisation: Production of valuable gaseous and liquid chemicals from lactose by aqueous phase reforming

International Nuclear Information System (INIS)

Remón, J.; Ruiz, J.; Oliva, M.; García, L.; Arauzo, J.

2016-01-01

Highlights: • Aqueous phase reforming: a promising strategy for cheese whey valorisation. • In-depth understanding of the effect of the operating conditions on the process. • Process optimisation for the selective production of valuable gas and liquid products. • High P, T, lactose concentration and spatial time favour gas production. • High T, low spatial time and the use of diluted solutions maximise liquids production. - Abstract: Cheese effluent management has become an important issue owing to its high biochemical oxygen demand and chemical oxygen demand values. Given this scenario, this work addresses the valorisation of lactose (the largest organic constituent of this waste) by aqueous phase reforming, analysing the influence of the most important operating variables (temperature, pressure, lactose concentration and mass of catalyst/lactose mass flow rate ratio) as well as optimising the process for the production of either gaseous or liquid value-added chemicals. The carbon converted into gas, liquid and solid products varied as follows: 5–41%, 33–97% and 0–59%, respectively. The gas phase was made up of a mixture of H_2 (8–58 vol.%), CO_2 (33–85 vol.%), CO (0–15 vol.%) and CH_4 (0–14 vol.%). The liquid phase consisted of a mixture of aldehydes: 0–11%, carboxylic acids: 0–22%, monohydric alcohols: 0–23%, polyhydric-alcohols: 0–48%, C3-ketones: 4–100%, C4-ketones: 0–18%, cyclic-ketones: 0–15% and furans: 0–85%. H_2 production is favoured at high pressure, elevated temperature, employing a high amount of catalyst and a concentrated lactose solution. Liquid production is preferential using diluted lactose solutions. At high pressure, the production of C3-ketones is preferential using a high temperature and a low amount of catalyst, while a medium temperature and a high amount of catalyst favours the production of furans. The production of alcohols is preferential using medium temperature and pressure and a low amount of

Agrobacterium rhizogenes-mediated transformation of Superroot-derived Lotus corniculatus plants: a valuable tool for functional genomics

Directory of Open Access Journals (Sweden)

Liu Wei

2009-06-01

reach 92% based on GUS detection. The combination of the highly efficient transformation and the regeneration system of Superroot provides a valuable tool for functional genomics studies in L. corniculatus.

Radio Frequency Identification

Indian Academy of Sciences (India)

When I bought a car recently, I saw an RFID tag stuck to the windshield ..... is available, electronic sensor circuits can be added to the tag and the processor in the ... Decryption would be normally done by a back-end computer attached to the ...

High School Timetabling: Modeling and solving a large number of cases in Denmark

DEFF Research Database (Denmark)

Sørensen, Matias; Stidsen, Thomas Riis

2012-01-01

for high school administration (available only for Danish high schools), which includes an embedded application for creating a weekly timetable. Currently, 230 high schools are customers of Lectio, and 191 have bought access to the timetabling software. This constitutes the majority of high schools...

Mida tähendab meile holokaust? : võrdlevalt Ameerikast ja Eestist / Anton Weiss-Wendt

Index Scriptorium Estoniae

Weiss-Wendt, Anton

2001-01-01

Holokausti tähendusele pühendatud Ameerikas hiljuti ilmunud raamatutest : Novick, Peter. Holocaust in American Life ; Cole, Tim. Selling the Holocaust: from Auschwitz to Schindler. How history is Bought, Packaged, and Sold ; Finkelstein, Norman. The Holocaust Industry: Reflection on the Exploitation of Jewish Suffering

Contribution to the knowledge of the genera Muntiacus and Arctogalidia in the Indo-Australian Archipelago (Mammalia, Cervidae & Viverridae)

NARCIS (Netherlands)

Bemmel, van A.C.V.

1952-01-01

As I have pointed out before, big game animals are very scarce in Museum collections. Many treatises are based on material from Zoological gardens, changed by captivity and often from unknown origin, from collections of frontlets, skulls and other trophies, bought haphazardly during expeditions

Science Smiles

Indian Academy of Sciences (India)

Page 1. Science Smiles. RKLaxman. I bought the plot to build my office. But the activists would not let me touch anything lest it should upset the ecological balance here. R -E-SO-N-A-N-C-E -, -Fe-b-ru-ary-19-9-S -----~-------------

ROBERT NOZICK'S ENTITLEMENT THEORY OF JUSTICE: A ...

African Journals Online (AJOL)

Dean SPGS NAU

assumption that a person's endowments are arbitrary from a moral point of view, because .... The clearest issue is the fact that he does not base this to the right to life and there ... bought by a mobile service company and the workers of the call.

攀岩——最值得考虑的事

Institute of Scientific and Technical Information of China (English)

无

2007-01-01

As I sank, knee-deep, into another snowdrift two things simultaneously(自然地) occurred to (发生)me. Firstly, my boots, which I bought for ￡25 from asports discount shop on Oxford Street, were definitely not water-proof (防水).……

Ictalurus punctatus

African Journals Online (AJOL)

user

PLGA microspheres vaccine by double emulsion evaporation maltophilia. It was prepared to support the completion of the .... of the polyving alcohol (PVA bought from SIGMA) solution and churn by 1100 r/min, evaporating under ordinary temperature ...... turtle pond water quality. In Shanghai Fisheries University, Shanghai.

Awaking the Public Sector with Strategic Corporate Philanthropy: Revitalizing the Public Servant's Organizational Knowledge, Innovative Capability, and Commitment

Science.gov (United States)

Jackson, Janese Marie

2011-01-01

Given the perils of today's dynamic and resource-constrained environment, intellectual capital has become a source of competitive advantage for public sector organizations. Composed of three elements--organizational knowledge, innovative capability, and organizational commitment--intellectual capital is an asset that cannot simply be bought or…

Possible barriers to the advancement of women to leadership ...

African Journals Online (AJOL)

new models for the greater management of education for the purposes of institutional .... that women lack role-models and peers in leadership positions; .... benefit of all its inhabitants. ..... chattels, bought and sold like other market commodities. ..... children are often characterised as aggressive, disruptive, bothersome.

Wavelength Measurements of Ni L-shell Lines between 9 and 15 A

Science.gov (United States)

Gu, Ming F.; Beiersdorfer, P.; Brown, G. V.; Chen, H.; Thorn, D. B.; Kahn, S. M.

2006-09-01

We present accurate wavelength measurements of nikel L-shell X-ray lines resulting from Δ n ≥ 1 transitions (mostly, 2 - 3 transitions) between 9 and 15 Å. We have used the electron beam ion trap, SuperEBIT, at the Lawrence Livermore National Laboratory and a flat field grating spectrometer to record the spectra. Most significant emission lines of Ni XIX -- XXVI in our spectral coverage are identified. The resulting data set provides valuable input in the analyses of high resolution X-ray spectra of stellar coronae sources, including the Sun. This work was performed under the auspices of U.S. DOE contract No. W-7405-Eng-48, and supported by NASA APRA Grant NAG5-5419.

Increased self-diffusion of brain water in hydrocephalus measured by MR imaging

DEFF Research Database (Denmark)

Gideon, P; Thomsen, C; Gjerris, F

1994-01-01

We used MR imaging to measure the apparent brain water self-diffusion in 5 patients with normal pressure hydrocephalus (NPH), in 2 patients with high pressure hydrocephalus (HPH), and in 8 age-matched controls. In all patients with NPH significant elevations of the apparent diffusion coefficients...... white matter, and in one patient reexamined one year after surgery, ADCs were unchanged in nearly all brain regions. The increased ADC values in hydrocephalus patients may be caused by factors such as changes in myelin-associated bound water, increased Virchow-Robin spaces, and increased extracellular...... brain water fraction. For further studies of brain water diffusion in hydrocephalus patients, echo-planar imaging techniques with imaging times of a few seconds may be valuable....

Application of a Biodegradable Lubricant in a Diesel Vehicle

DEFF Research Database (Denmark)

Schramm, Jesper

2003-01-01

The IEA Advanced Motor Fuels Agreement has initiated this project concerning the application of biodegradable lubricants to diesel and gasoline type vehicles. Emission measurements on a chassis dynamometer were carried out. The purpose of these measurements was to compare the emissions of CO, CO2......, NOx, THC, PM, lubricant-SOF and PAH from one diesel and one gasoline type vehicle using biodegradable lubricants and conventional lubricants. This paper describes the results of the experiments with the diesel type vehicle only. Lubricant consumption and fuel consumption are other important parameters...... that have been evaluated during the experiments. Both vehicle types were operated on conventional crude oil based fuels and alternative fuels. The diesel vehicle was operated on conventional diesel fuel from a Danish fuel station, low sulfur diesel from Sweden and biodiesel, which was bought at a fuel...

Recovery Of Valuable Metals In Tin-Based Anodic Slimes By Carbothermic Reaction

OpenAIRE

Han Chulwoong; Kim Young-Min; Son Seong Ho; Choi Hanshin; Kim Tae Bum; Kim Yong Hwan

2015-01-01

This study investigated the recovery of anodic slimes by carbothermic reaction in the temperature range of 973~1,273K and amount of carbon as a function of time. Tin anodic slime samples were collected from the bottom of the electrolytic cells during the electro-refining of tin. The anodic slimes are consisted of high concentrated tin, silver, copper and lead oxides. The kinetics of reduction were determined by means of the weight-loss measurement technique. In order to understand in detail o...

Modelled impacts of mitigation measures on greenhouse gas emissions from Finnish agriculture up to 2020

Directory of Open Access Journals (Sweden)

K. REGINA

2008-12-01

Full Text Available Emission scenarios based on integrated quantitative modelling are a valuable tool in planning strategies for greenhouse gas mitigation. By estimating the potential of individual mitigation measures to reduce greenhouse gas emissions, resources can be targeted to the most promising policy measures. This paper reports two agricultural emission scenarios for Finland up to year 2020, one baseline scenario (Scenario 1 based on the projected agricultural production levels determined by markets and agricultural policy and one with selected mitigation measures included (Scenario 2. Measures selected for the analysis consisted of 1 keeping agricultural area at the current level, 2 decreasing the proportion of organic soils, 3 increasing the proportion of grass cultivation on organic soils and 4 supporting biogas production on farms. Starting from 2005, the emissions of nitrous oxide and methane from agriculture would decrease 2.3% in Scenario 1 by 2020 whereas the respective decrease would be 11.5% in Scenario 2. According to the results, mitigation measures targeted to cultivation of organic soils have the largest potential to reduce the emissions. Such measures would include reducing the area of cultivated organic soils and increasing the proportion of perennial crops on the remaining area.

Measurement of the polarization correlation coefficient in elastic pp scattering at 610 MeV

International Nuclear Information System (INIS)

Borisov, N.S.; Glonti, L.N.; Kazarinov, M.Yu.

1977-01-01

The polarization correlation coefficient Csub(nn) for elastic pp scattering at 610+-10 MeV was measured for four scattering angles: 40, 67, 78 and 90 deg (c.m.s.). A polarized proton beam with a maximum polarization of 0.39+-0.02 and a polarized proton target of the frozen type were used. The maximum polarization of the target was 0.97+-0.04. The experimental procedure is described in detail. The Csub(nn) measured are compared with the results of a phase analysis and the findings at 575 MeV obtained elsewhere. The Csub(nn) coefficients are shown to be valuable to discriminate alternative solutions of the phase analysis. The polarized proton targets of the frozen type, no accounting the complexity of their design, are emphasized to be rather reliable and convenient devices for conducting experiments at accelerators

Applied use of cardiac and respiration measures: practical considerations and precautions.

Science.gov (United States)

Wilson, G F

1992-11-01

Cardiac and respiratory measures can be successfully applied to "real world" environments and these measures have certain advantages over both performance and subjective measures that are typically used to monitor operator state and workload. However, because of large differences between laboratory and "real world" environments one must utilize caution in directly applying laboratory data and theories to the day-to-day world environment. While most workers are highly over-trained in their jobs, laboratory subjects are often under-trained in the cognitive tasks that are used to study cognitive activity. It is possible that a substantial portion of experimental effects reported in laboratory studies is due to learning effects. In addition, relatively small changes in cardiac and respiration measures are reported to experimental manipulations in the laboratory while a much larger range of changes are reported in "real world" environments. These differences highlight questions about laboratory/real world similarities and the need to develop a database of actual work environment data. A third area of concern is the relative lack of control over the experimental situation that is the case with most applied research. The possible confounding of changes due to cognitive and physical activity levels is a major concern and strategies for overcoming these problems are suggested. The potential for valuable contributions by cardiac and respiratory measures to applied research make overcoming these difficulties worthwhile.

Measurements of plume geometry and argon-41 radiation field at the BR1 reactor in Mol, Belgium

International Nuclear Information System (INIS)

Drews, M.; Joergensen, H.; Lauritzen, Bent; Mikkelsen, T.; Aage, H.K.; Korsbech, U.; Bargholz, K.; Rojas-Palma, C.; Ammel, R. van

2002-02-01

An atmospheric dispersion experiment was conducted using a visible tracer along with the routine releases of 41 Ar from the BR1 air-cooled research reactor in Mol. In the experiment, simultaneous measurements of the radiation field from the 41 Ar decay, the meteorology, the 41 Ar source term and plume geometry were performed. The visible tracer was injected into the reactor emission stack, and the plume cross section determined by Lidar scanning of the released aerosols. The data collected in the exercise provide a valuable resource for atmospheric dispersion and dose rate modeling. (au)

Measurement of spin pumping voltage separated from extrinsic microwave effects

International Nuclear Information System (INIS)

Iguchi, Ryo; Saitoh, Eiji

2017-01-01

Conversions between spin and charge currents are core technologies in recent spintronics. In this article, we provide methods for estimating inverse spin Hall effects (ISHEs) induced by using microwave-driven spin pumping (SP) as a spin-current generator. ISHE and SP induce an electromotive force at the ferromagnetic or spin-wave resonance, which offers a valuable electric method of studying spin physics in materials. At the resonance, a microwave for exciting the magnetization dynamics induces an additional electromotive force via rf-current rectification and thermoelectric effects. We discuss methods of separating the signals generated from such extrinsic microwave effects by controlling sample structures and configurations. These methods are helpful in performing accurate measurements on ISHE induced by SP, enabling quantitative studies on the conversion between spin and charge currents on various kinds of materials. (author)

Overview of the In-Flight Experimentations and Measurements on the IXV Experimental Vehicle

Science.gov (United States)

Cosson, E.; Giusto, S.; Del Vecchio, A.; Mancuso, S.

2009-01-01

After an assessment and then a trade-off of all the passenger experiments proposed by different partners within Europe, a selection of Core Experiments to be embarked on-board IXV to fulfil the Mission and System Requirements has been made. Some Passenger Experiments have also been identified to be potentially embarked, provided it is compatible with the system allocations, since they could bring valuable additional in-flight data. All those experiments include Thermal Protection System (TPS) experiments (including innovative TPS materials), AeroThermoDynamic (ATD) experiments and Health Monitoring System (HMS) experiments. Aside the previously mentioned experiments, a specific Vehicle Model Identification experiment (VMI) aims at validating in-flight the mathematical models of flight dynamics for a gliding re-entry vehicle. This paper also presents a preliminary version of the in- flight measurement plan, encompassing both conventional instrumentation and advanced sensors or even innovative measurement techniques.

Multimodal assessment of visual attention using the Bethesda Eye & Attention Measure (BEAM).

Science.gov (United States)

Ettenhofer, Mark L; Hershaw, Jamie N; Barry, David M

2016-01-01

Computerized cognitive tests measuring manual response time (RT) and errors are often used in the assessment of visual attention. Evidence suggests that saccadic RT and errors may also provide valuable information about attention. This study was conducted to examine a novel approach to multimodal assessment of visual attention incorporating concurrent measurements of saccadic eye movements and manual responses. A computerized cognitive task, the Bethesda Eye & Attention Measure (BEAM) v.34, was designed to evaluate key attention networks through concurrent measurement of saccadic and manual RT and inhibition errors. Results from a community sample of n = 54 adults were analyzed to examine effects of BEAM attention cues on manual and saccadic RT and inhibition errors, internal reliability of BEAM metrics, relationships between parallel saccadic and manual metrics, and relationships of BEAM metrics to demographic characteristics. Effects of BEAM attention cues (alerting, orienting, interference, gap, and no-go signals) were consistent with previous literature examining key attention processes. However, corresponding saccadic and manual measurements were weakly related to each other, and only manual measurements were related to estimated verbal intelligence or years of education. This study provides preliminary support for the feasibility of multimodal assessment of visual attention using the BEAM. Results suggest that BEAM saccadic and manual metrics provide divergent measurements. Additional research will be needed to obtain comprehensive normative data, to cross-validate BEAM measurements with other indicators of neural and cognitive function, and to evaluate the utility of these metrics within clinical populations of interest.

Filtering for distributed mechanical systems using position measurements: perspectives in medical imaging

International Nuclear Information System (INIS)

Moireau, Philippe; Chapelle, Dominique; Tallec, Patrick Le

2009-01-01

We propose an effective filtering methodology designed to perform estimation in a distributed mechanical system using position measurements. As in a previously introduced method, the filter is inspired by robust control feedback, but here we take full advantage of the estimation specificity to choose a feedback law that can act on displacements instead of velocities and still retain the same kind of dissipativity property which guarantees robustness. This is very valuable in many applications for which positions are more readily available than velocities, as in medical imaging. We provide an in-depth analysis of the proposed procedure, as well as detailed numerical assessments using a test problem inspired by cardiac biomechanics, as medical diagnosis assistance is an important perspective for this approach. The method is formulated first for measurements based on Lagrangian displacements, but we then derive a nonlinear extension allowing us to instead consider segmented images, which of course is even more relevant in medical applications

EDITORIAL: Precision Measurement Technology at the 56th International Scientific Colloquium in Ilmenau Precision Measurement Technology at the 56th International Scientific Colloquium in Ilmenau

Science.gov (United States)

Manske, E.; Froehlich, T.

2012-07-01

The 56th International Scientific Colloquium was held from 12th to 16th September 2011 at the Ilmenau University of Technology in Germany. This event was organized by the Faculty of Mechanical Engineering under the title: 'Innovation in Mechanical Engineering—Shaping the Future' and was intended to reflect the entire scope of modern mechanical engineering. In three main topics many research areas, all involving innovative mechanical engineering, were addressed, especially in the fields of Precision Engineering and Precision Measurement Technology, Mechatronics and Ambient-Assisted Living and Systems Technology. The participants were scientists from 21 countries, and 166 presentations were given. This special issue of Measurement Science and Technology presents selected contributions on 'Precision Engineering and Precision Measurement Technology'. Over three days the conference participants discussed novel scientific results in two sessions. The main topics of these sessions were: Measurement and Sensor Technology Process measurement Laser measurement Force measurement Weighing technology Temperature measurement Measurement dynamics and Nanopositioning and Nanomeasuring Technology Nanopositioning and nanomeasuring machines Nanometrology Probes and tools Mechanical design Signal processing Control and visualization in NPM devices Significant research results from the Collaborative Research Centre SFB 622 'Nanopositioning and Nanomeasuring Machines' funded by the German Research Foundation (DFG) were presented as part of this topic. As the Chairmen, our special thanks are due to the International Programme Committee, the Organization Committee and the conference speakers as well as colleagues from the Institute of Process Measurement and Sensor Technology who helped make the conference a success. We would like to thank all the authors for their contributions, the referees for their time spent reviewing the contributions and their valuable comments, and the whole