WorldWideScience

Sample records for measured program characteristics

  1. Sustained Implementation Support Scale: Validation of a Measure of Program Characteristics and Workplace Functioning for Sustained Program Implementation.

    Science.gov (United States)

    Hodge, Lauren M; Turner, Karen M T; Sanders, Matthew R; Filus, Ania

    2017-07-01

    An evaluation measure of enablers and inhibitors to sustained evidence-based program (EBP) implementation may provide a useful tool to enhance organizations' capacity. This paper outlines preliminary validation of such a measure. An expert informant and consumer feedback approach was used to tailor constructs from two existing measures assessing key domains associated with sustained implementation. Validity and reliability were evaluated for an inventory composed of five subscales: Program benefits, Program burden, Workplace support, Workplace cohesion, and Leadership style. Exploratory and confirmatory factor analysis with a sample of 593 Triple P-Positive Parenting Program-practitioners led to a 28-item scale with good reliability and good convergent, discriminant, and predictive validity. Practitioners sustaining implementation at least 3 years post-training were more likely to have supervision/peer support, reported higher levels of program benefit, workplace support, and positive leadership style, and lower program burden compared to practitioners who were non-sustainers.

  2. Computer programs for evaluation of turbulence characteristics from hot-wire measurements

    International Nuclear Information System (INIS)

    Vosahlo, L.

    1984-06-01

    This report describes the set of the computer programs for evaluation of the turbulent flow characteristics from hot-wire experimental data. Three different methods and, in addition, some variants are solved in these programs. This enables a comparison of the results obtained by these methods and the analysis of the influence of individual calculation parameters and calibration coefficients on the evaluated results. The results are printed in lucid numerical tables and written into files for further processing into graphs by plotting routines. (orig.) [de

  3. Measuring thermal neutron characteristics

    International Nuclear Information System (INIS)

    Johnstone, C.W.; Jacobson, L.A.

    1983-01-01

    A method for providing a background-compensated measurement of the level of inducted radiation within an earth formation is claimed. The formation is irradiated with a discrete burst of neutrons and the level of radiation in the formation measured. The level of background radiation is then measured. An average level of both measurements is obtained

  4. Measurement control program

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    A measurement control program for the model plant is described. The discussion includes the technical basis for such a program, the application of measurement control principles to each measurement, and the use of special experiments to estimate measurement error parameters for difficult-to-measure materials. The discussion also describes the statistical aspects of the program, and the documentation procedures used to record, maintain, and process the basic data. The purpose of the session is to enable participants to: (1) understand the criteria for this type of a measurement control program; (2) understand the kinds of physical standards required for the various measurement processes, e.g., weighing, analytical, NDA; (3) understand the need for and importance of a measurement control program; (4) understand the need for special experiments to provide an improved basis for the measurement of difficult-to-measure materials; (5) understand the general scope of the program's statistical aspects; and (6) understand the basis and scope of the documentation procedures

  5. Auditing measurement control programs

    International Nuclear Information System (INIS)

    Roberts, F.P.; Brouns, R.J.

    1979-10-01

    Requirements and a general procedure for auditing measurement control programs used in special nuclear material accounting are discussed. The areas of measurement control that need to be examined are discussed and a suggested checklist is included to assist in the preparation and performance of the audit

  6. Sport Management Graduate Programs: Characteristics of Effectiveness.

    Science.gov (United States)

    Li, Ming; And Others

    1994-01-01

    Reports a study that examined the characteristics that enable graduate sport management programs to achieve their objectives. Surveys of sport management educators found they agreed on 11 characteristics that indicated a sport management program's effectiveness. Respondents believed an effective program should produce sport managers, not…

  7. Program Director Participation in a Leadership and Management Skills Fellowship and Characteristics of Program Quality.

    Science.gov (United States)

    Carek, Peter J; Mims, Lisa D; Conry, Colleen M; Maxwell, Lisa; Greenwood, Vicki; Pugno, Perry A

    2015-01-01

    The association between a residency program director completing a leadership and management skills fellowship and characteristics of quality and innovation of his/her residency program has not been studied. Therefore, the aim of this study is to examine the association between a residency program director's completion of a specific fellowship addressing these skills (National Institute for Program Director Development or NIPDD) and characteristics of quality and innovation of the program they direct. Using information from the American Academy of Family Physicians (AAFP), National Resident Matching Program (NRMP) and FREIDA® program characteristics were obtained. Descriptive statistics were used to summarize the data. The relationship between programs with a NIPDD graduate as director and program quality measures and indicators of innovation was analyzed using both chi square and logistic regression. Initial analyses showed significant associations between the NIPDD graduate status of a program director and regional location, mean years of program director tenure, and the program's 5-year aggregate ABFM board pass rate from 2007--2011. After grouping the programs into tertiles, the regression model showed significant positive associations with programs offering international experiences and being a NIPDD graduate. Program director participation in a fellowship addressing leadership and management skills (ie, NIPDD) was found to be associated with higher pass rates of new graduates on a Board certification examination and predictive of programs being in the upper tertile of programs in terms of Board pass rates.

  8. Measurements of image characteristics of DSA installations

    International Nuclear Information System (INIS)

    Busch, H.P.; Strauss, L.G.; Freimarck, R.D.

    1984-01-01

    Measurements for quantifying the image characteristics were carried out on three DSA installations (DVI 1 - Philips, Angiotron - Siemens and DF 3000 - General Eletric). Contrast resolution was measured with a vessel phantom (General Electric) and spatial resolution with a lead grid. A further parameter was the dose entering the image intensifier. The Angiotron was used with an intensifier with 53 cm. diameter and the DF 3000 with temporal subtraction of the video images and the subtraction of dual energy images (hybrid technique). These measurements can be carried out quickly and easily and are a step towards standardisation of measurements of image characteristics of DSA installations. (orig.) [de

  9. Program Characteristics Influencing Allopathic Students' Residency Selection.

    Science.gov (United States)

    Stillman, Michael D; Miller, Karen Hughes; Ziegler, Craig H; Upadhyay, Ashish; Mitchell, Charlene K

    2016-04-01

    Medical students must consider many overt variables when entering the National Resident Matching Program. However, changes with the single graduate medical education accreditation system have caused a gap in knowledge about more subtle considerations, including what, if any, influence the presence of osteopathic physician (ie, DO) and international medical graduate (IMG) house officers has on allopathic students' residency program preferences. Program directors and selection committee members may assume students' implicit bias without substantiating evidence. To reexamine which program characteristics affect US-trained allopathic medical students' residency selection, and to determine whether the presence of DO and IMG house officers affects the program choices of allopathic medical students. Fourth-year medical students from 4 allopathic medical schools completed an online survey. The Pearson χ(2) statistic was used to compare demographic and program-specific traits that influence ranking decisions and to determine whether school type (private vs public), valuing a residency program's prestige, or interest in a competitive specialty dictated results. Qualitative data were analyzed using the Pandit variation of the Glaser and Strauss constant comparison. Surveys were completed by 323 of 577 students (56%). Students from private vs public institutions were more likely to value a program's prestige (160 [93%] vs 99 [72%]; P<.001) and research opportunities (114 [66%] vs 57 [42%]; P<.001), and they were less likely to consider their prospects of being accepted (98 [57%] vs 111 [81%]; P<.001). A total of 33 (10%) and 52 (16%) students reported that the presence of DO or IMG trainees, respectively, would influence their final residency selection, and these percentages were largely unchanged among students interested in programs' prestige or in entering a competitive specialty. Open-ended comments were generally optimistic about diversification of the physician

  10. The NRC measurement verification program

    International Nuclear Information System (INIS)

    Pham, T.N.; Ong, L.D.Y.

    1995-01-01

    A perspective is presented on the US Nuclear Regulatory Commission (NRC) approach for effectively monitoring the measurement methods and directly testing the capability and performance of licensee measurement systems. A main objective in material control and accounting (MC and A) inspection activities is to assure the accuracy and precision of the accounting system and the absence of potential process anomalies through overall accountability. The primary means of verification remains the NRC random sampling during routine safeguards inspections. This involves the independent testing of licensee measurement performance with statistical sampling plans for physical inventories, item control, and auditing. A prospective cost-effective alternative overcheck is also discussed in terms of an externally coordinated sample exchange or ''round robin'' program among participating fuel cycle facilities in order to verify the quality of measurement systems, i.e., to assure that analytical measurement results are free of bias

  11. A device for measuring electron beam characteristics

    Directory of Open Access Journals (Sweden)

    M. Andreev

    2017-01-01

    Full Text Available This paper presents a device intended for diagnostics of electron beams and the results obtained with this device. The device comprises a rotating double probe operating in conjunction with an automated probe signal collection and processing system. This provides for measuring and estimating the electron beam characteristics such as radius, current density, power density, convergence angle, and brightness.

  12. Measurement assurance program for FTIR analyses of deuterium oxide samples

    International Nuclear Information System (INIS)

    Johnson, S.R.; Clark, J.P.

    1997-01-01

    Analytical chemistry measurements require an installed criterion based assessment program to identify and control sources of error. This program should also gauge the uncertainty about the data. A self- assessment was performed of long established quality control practices against the characteristics of a comprehensive measurement assurance program. Opportunities for improvement were identified. This paper discusses the efforts to transform quality control practices into a complete measurement assurance program. The resulting program heightened the laboratory's confidence in the data it generated, by providing real-time statistical information to control and determine measurement quality

  13. Atmospheric Radiation Measurement Program plan

    International Nuclear Information System (INIS)

    1990-02-01

    In order to understand energy's role in anthropogenic global climate change, significant reliance is being placed on General Circulation Models (GCMs). A major goal is to foster the development of GCMs capable of predicting the timing and magnitude of greenhouse gas-induced global warming and the regional effects of such warming. The Atmospheric Radiation Measurement (ARM) Program will contribute to the Department of Energy goal by improving the treatment of cloud radiative forcing and feedbacks in GCMs. Two issues will be addressed: the radiation budget and its spectral dependence and the radiative and other properties of clouds. The experimental objective of the ARM Program is to characterize empirically the radiative processes in the Earth's atmosphere with improved resolution and accuracy. A key to this characterization is the effective treatment of cloud formation and cloud properties in GCMs. Through this characterization of radiative properties, it will be possible to understand both the forcing and feedback effects. 19 refs., 4 figs., 2 tabs

  14. Measurements of Aerosol Characteristics in Skocjan Caves

    International Nuclear Information System (INIS)

    Jovanovic, P.

    2013-01-01

    Measurements of radon concentration and radon progeny concentration (attached and unattached) have been performed in Skocjan caves. In the same time also aerosol concentration (PM 10 ), aerosol size distribution with ten stage Hauke impactor and Scanning Mobility Particle Sizer - SMPS have been performed. The idea was to find impact of outer air and visitors to the aerosol characteristics of cave air. Measurements with impactor have been implemented in summer and winter period, with SMPS only in summer period. Radon concentrations ranged in winter period in region from 500 to 1000 Bq/m 3 , equilibrium factor was about 55 %. In summer period radon concentration increased up to 10 kBq/m 3 , equilibrium factor was about 45 %, and unattached fraction went up to 20 %. Measurements of aerosol size distribution show lower aerosol sizes in winter season (around 1 μm) and bigger aerosol sizes in summer season (around 3 - 6 μm). We could not find good correlation between unattached fraction and aerosol size distribution. Also we could not find clear impact of visitors to the air characteristics in cave. Probably our measuring location was too close to the entrance and the impact of outer air was too high. We will repeat measurements deeper in cave to find better results.(author)

  15. Characteristic measurements of JRR-2 after modification

    International Nuclear Information System (INIS)

    1977-03-01

    JRR-2 was shut down in December 1973, to improve it in heavy water leakage from the metal packing between core tank and support ring, corrosion of the lower shielding plug, and fault in the control-rod mechanism. Modification was on a standing seal to stop heavy water leakage at the support ring, replacement of the reactor top shield, replacement of the control-rod mechanism, improvement of the helium system, improvement of the irradiated air system to reduce radioactive argon gas release from the stack. Works were completed in September 1975. Functional tests and characteristic measurements then followed, to show good results of the modification. Described are; modification, critical experiments, calibration of the control rods, reactor thermal power, measurements of the neutron flux distribution, core heavy water flow distribution, heavy water decomposition rate, helium leak rate and tritium concentration in the thermal shielding light water, radioactive argon gas release from the stack, and effect of the reactor top shield. (auth.)

  16. Characteristics quality system assurance of university programs

    Directory of Open Access Journals (Sweden)

    Lucian Ion Medar

    2011-03-01

    Full Text Available Quality assurance program of study requires time, dedication, effort, innovative thinking and creativity. Competitive research programs monitored by quality assurance system to create the desired results on the relationship between learning and teaching methods and assessment.

  17. Atmospheric Radiation Measurement Program Plan

    International Nuclear Information System (INIS)

    1990-02-01

    In order to understand energy's role in anthropogenic global climate change, significant reliance is being placed on General Circulation Models (GCMs). A major goal of the Department is to foster the development of GCMs capable of predicting the timing and magnitude of greenhouse gas-induced global warming and the regional effects of such warming. DOE research has revealed that cloud radiative feedback is the single most important effect determining the magnitude of possible climate responses to human activity. However, cloud radiative forcing and feedbacks are not understood at the levels needed for reliable climate prediction. The Atmospheric Radiation Measurement (ARM) Program will contribute to the DOE goal by improving the treatment of cloud radiative forcing and feedbacks in GCMs. Two issues will be addressed: the radiation budget and its spectral dependence and the radiative and other properties of clouds. Understanding cloud properties and how to predict them is critical because cloud properties may very well change as climate changes. The experimental objective of the ARM Program is to characterize empirically the radiative processes in the Earth's atmosphere with improved resolution and accuracy. A key to this characterization is the effective treatment of cloud formation and cloud properties in GCMs. Through this characterization of radiative properties, it will be possible to understand both the forcing and feedback effects. GCM modelers will then be able to better identify the best approaches to improved parameterizations of radiative transfer effects. This is expected to greatly improve the accuracy of long-term, GCM predictions and the efficacy of those predictions at the important regional scale, as the research community and DOE attempt to understand the effects of greenhouse gas emissions on the Earth's climate. 153 refs., 24 figs., 6 tabs

  18. Potential transportation demand management programs and measures

    Energy Technology Data Exchange (ETDEWEB)

    Litman, T. [Victoria Transport Policy Institute, Victoria, BC (Canada)

    1997-02-07

    The advantages of transportation demand management (TDM) programs were discussed. TDM includes several policies, programs and measures designed to change travel patterns. TDM programs include commute trip reductions, pricing policies, land use management strategies, and programs to support alternative modes of transportation such as public transit, carpooling, bicycling, walking and telecommuting. TDM programs are designed to reduce traffic congestion and air pollution. Some other TDM programs and measures include: enabling programs, alternative mode encouragement, driving disincentives, parking programs, marginalizing user costs, reducing automobile ownership, and land use management.

  19. NASA's Optical Measurement Program 2014

    Science.gov (United States)

    Cowardin, H.; Lederer, S.; Stansbery, G.; Seitzer, P.; Buckalew, B.; Abercromby, K.; Barker, E.

    2014-01-01

    The Optical Measurements Group (OMG) within the NASA Orbital Debris Program Office (ODPO) addresses U.S. National Space Policy goals by monitoring and characterizing debris. Since 2001, the OMG has used the Michigan Orbital Debris Survey Telescope (MODEST) at Cerro Tololo Inter-American Observatory (CTIO) in Chile for general orbital debris survey. The 0.6-m Schmidt MODEST provides calibrated astronomical data of GEO targets, both catalogued and uncatalogued debris, with excellent image quality. The data are utilized by the ODPO modeling group and are included in the Orbital Debris Engineering Model (ORDEM) v. 3.0. MODEST and the CTIO/SMARTS (Small and Moderate Aperture Research Telescope System) 0.9 m both acquire filter photometric data, as well as synchronously observing targets in selected optical filters. This information provides data used in material composition studies as well as longer orbital arc data on the same target, without time delay or bias from a rotating, tumbling, or spinning target. NASA, in collaboration with the University of Michigan, began using the twin 6.5-m Magellan telescopes at Las Campanas Observatory in Chile for deep imaging (Baade) and spectroscopic data (Clay) in 2011. Through the data acquired on Baade, debris have been detected that are 3 magnitudes fainter than detections with MODEST, while the data from Clay provide better resolved information used in material characterization analyses via selected bandpasses. To better characterize and model optical data, the Optical Measurements Center (OMC) at NASA/JSC has been in operation since 2005, resulting in a database of comparison laboratory data. The OMC is designed to emulate illumination conditions in space using equipment and techniques that parallel telescopic observations and source-target-sensor orientations. Lastly, the OMG is building the Meter Class Autonomous Telescope (MCAT) at Ascension Island. The 1.3-m telescope is designed to observe GEO and LEO targets, using a

  20. Measurement problem in PROGRAM UNIVERSE

    International Nuclear Information System (INIS)

    Noyes, H.P.; Gefwert, C.

    1984-12-01

    We present a discrete theory that meets the measurement problem in a new way. We generate a growing universe of bit strings, labeled by 2 127 + 136 strings organized by some representation of the closed, four level, combinatorial hierarchy, of bit-length N 139 greater than or equal to 139. The rest of the strings for each label, which grow in both length and number, are called addresses. The generating algorithm, called PROGRAM UNIVERSE, starts from a random choice between the two symbols ''0'' and ''1'' and grows (a) by discriminating between two randomly chosen strings and adjoining a novel result to the universe, or when the string so generated is not novel, by (b) adjoining a randomly chosen bit at the growing end of each string. We obtain, by appropriate definitions and interpretations, stable ''particles'' which satisfy the usual relativistic kinematics and quantized angular momentum without being localizable in a continuum space-time. The labeling scheme is congruent with the ''standard model'' of quarks and leptons with three generations, but for the problem at hand, the implementation of this aspect of the theory is unimportant. What matters most is that (a) these complicated ''particles'' have the periodicities familiar from relativistic ''deBroglie waves'' and resolve in a discrete way the ''wave-particle dualism'' and (b) can be ''touched'' by our discrete equivalent of ''soft photons'' in such a way as to follow, macroscopically, the usual Rutherford scattering trajectories with the associated bound states. Thus our theory could provide a discrete description of ''measurement'' in a way that allows no conceptual barrier between the ''micro'' and the ''macro'' worlds, if we are willing to base our physics on counting and exclude the ambiguities associated with the unobservable ''continuum''. 27 refs

  1. Measurement control program at model facility

    International Nuclear Information System (INIS)

    Schneider, R.A.

    1984-01-01

    A measurement control program for the model plant is described. The discussion includes the technical basis for such a program, the application of measurement control principles to each measurement, and the use of special experiments to estimate measurement error parameters for difficult-to-measure materials. The discussion also describes the statistical aspects of the program, and the documentation procedures used to record, maintain, and process the basic data

  2. Mitigation measures and programs in Hungary

    Energy Technology Data Exchange (ETDEWEB)

    Molnar, S. [Systemexpert Consulting Ltd., Budapest (Hungary)

    1996-12-31

    In Hungary there are four main governmental programs, which may result in a decrease of emissions of anthropogenic greenhouse gases (GHGs): (1) National program of energy efficiency improvement and energy conservation, (2) Afforestation program, (3) Volatile organic compounds (VOC) emission reduction program, and (4) Program to reduce the use of ozone depleting substances. These ambitious programs were launched in the beginning of the 90`s, but they have been slowed down because of budgetary problems. The comprehensive action plan for mitigation of GHG emissions should be based on these ongoing programs. These programs should be expanded by further measures and programs in order to fulfill the requirements of the FCCC. In the next sections the results and prospects of the above mentioned programs will be summarized. Also the results of the mitigation study supported by the U.S. Country Studies Program are included.

  3. Measurement control program for nuclear material accounting

    International Nuclear Information System (INIS)

    Brouns, R.J.; Roberts, F.P.; Merrill, J.A.; Brown, W.B.

    1980-06-01

    A measurement control program for nuclear material accounting monitors and controls the quality of the measurments of special nuclear material that are involved in material balances. The quality is monitored by collecting data from which the current precision and accuracy of measurements can be evaluated. The quality is controlled by evaluations, reviews, and other administrative measures for control of selection or design of facilities, equipment and measurement methods and the training and qualification of personnel who perform SNM measurements. This report describes the most important elements of a program by which management can monitor and control measurement quality

  4. Workforce Characteristics and Attitudes Regarding Participation in Worksite Wellness Programs.

    Science.gov (United States)

    Hall, Jennifer L; Kelly, Kevin M; Burmeister, Leon F; Merchant, James A

    2017-09-01

    To estimate workforce participation characteristics and employees' attitudes regarding participation in workplace wellness programs. Data from a statewide stratified random sample were used to compare small (workplaces to estimate participation in screening programs and likelihood of participation in workplace wellness programs. A telephone survey of employed Iowans registered to vote. Surveyed were 1171 employed Iowans registered to vote, ages 18 to 65. Among questionnaire survey modules were items from the Wellness Council of America Employee Needs and Interest Survey, the U.S. Census Bureau for employment documentation, and the World Health Organization Health and Work Performance Questionnaire for assessment of sickness absenteeism and presenteeism. Prevalence of participation in screening and wellness programs was analyzed by employment size and levels of likeliness to participate, and multivariable analyses of employee baseline characteristics regarding participation in screening programs and likelihood of participation in wellness programs was presented as top and bottom quartiles. Those employed in smaller workplaces participated less often in screening programs. Multivariable models identified male gender and those with an abnormal body mass index were associated with nonparticipation, while having a primary care physician was associated with participation. Very few items showed significant statistical difference in willingness to participate. Workforce characteristics and access to health care may influence participation in screening and wellness programs. Employment size is not a determining factor for willingness to participate in wellness programs.

  5. Aerial radiological measuring system program

    International Nuclear Information System (INIS)

    Doyle, J.F.; Boyns, P.K.

    1972-01-01

    The present ARMS aircraft has an effective survey time of four hours. Typical survey altitudes are 300 to 500 feet for terrain surveys and up to 20,000 feet for cloud tracks. A number of special airframe modifications have been made to accommodate the various sensor systems. The ARMS radiation measurement system consists of fourteen 4-inch diameter by 4-inch thick sodium iodide (NaI) detectors, a summing network for the detector signals, single and multichannel analyzers, analog computers, digital display and recording equipment, a doppler radar position computer, and strip chart recorders. Major subsystems include meteorology sensors, multispectral camera systems, and an infrared scanner for thermal mapping. Additional radiation detectors include an alpha spectrometer and a beta counter, used to count filter samples taken from a 150 cfm air sampler, which is a permanent part of the aircraft. A small lead shield houses a 1 / 2 -in. x 3-in. NaI crystal for beta and gamma counting of air filter samples. Several BF 3 neutron detectors are also available for neutron counting. The raw data from the gross gamma count and the gamma spectral measurements are permanently recorded on paper tape, and they must undergo reduction and analysis for final characterization of the radiological properties of the surveyed area. (U.S.)

  6. Measurement of the photometric characteristics of LEDs

    International Nuclear Information System (INIS)

    Nazarenko, L.A.; Zubkov, D.P.

    2015-01-01

    Proposed and implemented a method for measuring LEDs, which is based on self-calibration of the LED goniophotometer facility by using a trap-detector. Designed and manufactured automated goniophotometer, which provides a measurement of high power LEDs at a specified junction temperature. Designed and experimentally researched the photometer with a photometric sphere based diffuser, which meets all requirements of CIE for photometric measurements of LEDs

  7. Measurement of gradient magnetic field temporal characteristics

    International Nuclear Information System (INIS)

    Bartusek, K.; Jflek, B.

    1994-01-01

    We describe a technique of measuring the time dependence and field distortions of magnetic fields due to eddy currents (EC) produced by time-dependent magnetic field gradients. The EC measuring technique makes use of a large volume sample and selective RF excitation pulses and free induction decay (FID) (or a spin or gradient echo) to measure the out-of-phase component of the FID, which is proportional to γδB, i.e. the amount the signal is off resonance. The measuring technique is sensitive, easy to implement and interpret, and used for determining pre-emphasis compensation parameters

  8. Linking Measured Risk Aversion to Individual Characteristics.

    NARCIS (Netherlands)

    Hartog, J.; Ferrer-i-Carbonell, A.; Jonker, N.

    2002-01-01

    From the stated price of a specified lottery in three unrelated surveys we deduce individuals' Arrow-Pratt measure of risk aversion. We find that risk aversion indeed falls with income and wealth. Entrepreneurs are less risk averse than employees, civil servants are more risk averse than private

  9. Characteristics of a simple blackbody measurement system

    International Nuclear Information System (INIS)

    Fu, C.; Anger, N.H.; Kaehms, R.; Jaeger, K.B.

    1988-01-01

    An axially symmetric blackbody (BB) measurement system with a circular aperture and a circular detector is considered. The BB can be of a right circular conical shape, a right cylindrical shape, or a combination of these two shapes. Assuming that the BB is ideal, the power received by the detector is calculated. 8 references

  10. Programming the control of magnetic field measurements

    International Nuclear Information System (INIS)

    David, L.

    1998-01-01

    This paper gives a short review concerning the new NMR probe measurement control system. Then it presents the new program 'CYCLOCHAMP' attached to the magnetic field measurement which also allows to cycle the magnetic field inside the cyclotrons and to equilibrate it among the SSC sectors. (authors)

  11. Measuring Thermal Characteristics of Urban Landscapes

    Science.gov (United States)

    Luvall, Jeffrey C.; Quattrochi, Dale A.; Rickman, Doug L.

    1999-01-01

    The additional heating of the air over the city is the result of the replacement of naturally vegetated surfaces with those composed of asphalt, concrete, rooftops and other man-made materials. The temperatures of these artificial surfaces can be 20 to 40 C higher than vegetated surfaces. Materials such as asphalt store much of the sun's energy and remains hot long after sunset. This produces a dome of elevated air temperatures 5 to 8 C greater over the city, compared to the air temperatures over adjacent rural areas. This effect is called the "urban heat island". Urban landscapes are a complex mixture of vegetated and nonvegetated surfaces. It is difficult to take enough temperature measurements over a large city area to characterize the complexity of urban radiant surface temperature variability. However, the use of remotely sensed thermal data from airborne scanners are ideal for the task. In a study funded by NASA, a series of flights over Huntsville, Alabama were performed in September 1994 and over Atlanta, Georgia in May 1997. Analysis of thermal energy responses for specific or discrete surfaces typical of the urban landscape (e.g., asphalt, building rooftops, vegetation) requires measurements at a very fine spatial scale (i.e., urban forest in both mitigating the urban heat island effect, in making cities more aesthetically pleasing and more habitable environments, and in overall cooling of the community. In this presentation we will examine the techniques of analyzing remotely sensed data for measuring the effect of various urban surfaces on their contribution to the urban heat island effect.

  12. Measuring Thermal Characteristics of Urban Landscapes

    Science.gov (United States)

    Luvall, Jeffrey C.; Quattrochi, Dale A.; Rickman, Doug L.

    1999-01-01

    The additional heating of the air over the city is the result of the replacement of naturally vegetated surfaces with those composed of asphalt, concrete, rooftops and other man-made materials. The temperatures of these artificial surfaces can be 20 to 40 C higher than vegetated surfaces. Materials such as asphalt store much of the sun's energy and remains hot long after sunset. This produces a dome of elevated air temperatures 5 to 8 C greater over the city, compared to the air temperatures over adjacent rural areas. This effect is called the "urban heat island". Urban landscapes are a complex mixture of vegetated and nonvegetated surfaces. It is difficult to take enough temperature measurements over a large city area to characterize the complexity of urban radiant surface temperature variability. However, the use of remotely sensed thermal data from airborne scanners are ideal for the task. In a study funded by NASA, a series of flights over Huntsville, Alabama were performed in September 1994 and over Atlanta, Georgia in May 1997. Analysis of thermal energy responses for specific or discrete surfaces typical of the urban landscape (e.g., asphalt, building rooftops, vegetation) requires measurements at a very fine spatial scale (i.e., energy regimes. Additionally, very fine scale spatial resolution thermal infrared data, such as that obtained from aircraft, are very useful for demonstrating to planning officials, policy makers, and the general populace, what the benefits are of the urban forest in both mitigating the urban heat island effect, in making cities more aesthetically pleasing and more habitable environments, and in overall cooling of the community. In this presentation we will examine the techniques of analyzing remotely sensed data for measuring the effect of various urban surfaces on their contribution to the urban heat island effect.

  13. Measuring Student Transformation in Entrepreneurship Education Programs

    Directory of Open Access Journals (Sweden)

    Steven A. Gedeon

    2017-01-01

    Full Text Available This article describes how to measure student transformation primarily within a university entrepreneurship degree program. Student transformation is defined as changes in knowledge (“Head”, skills (“Hand”, and attitudinal (“Heart” learning outcomes. Following the institutional impact model, student transformation is the primary goal of education and all other program goals and aspects of quality desired by stakeholders are either input factors (professors, courses, facilities, support, etc. or output performance (number of startups, average starting salary, % employment, etc.. This goal-setting framework allows competing stakeholder quality expectations to be incorporated into a continuous process improvement (CPI model when establishing program goals. How to measure these goals to implement TQM methods is shown. Measuring student transformation as the central focus of a program promotes harmony among competing stakeholders and also provides a metric on which other program decisions (e.g., class size, assignments, and pedagogical technique may be based. Different stakeholders hold surprisingly different views on defining program quality. The proposed framework provides a useful way to bring these competing views into a CPI cycle to implement TQM requirements of accreditation. The specific entrepreneurial learning outcome goals described in the tables in this article may also be used directly by educators in nonaccredited programs and single courses/workshops or for other audiences.

  14. 47 CFR 2.1047 - Measurements required: Modulation characteristics.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Measurements required: Modulation characteristics. 2.1047 Section 2.1047 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL FREQUENCY... Certification § 2.1047 Measurements required: Modulation characteristics. (a) Voice modulated communication...

  15. Characteristics of Teachers Nominated for an Accelerated Principal Preparation Program

    Science.gov (United States)

    Rios, Steve J.; Reyes-Guerra, Daniel

    2012-01-01

    This article reports the initial evaluation results of a new accelerated, job-embedded principal preparation program funded by a Race to the Top Grant (U.S. Department of Education, 2012a) in Florida. Descriptive statistics, t-tests, and chi-square analyses were used to describe the characteristics of a group of potential applicants nominated to…

  16. Characteristics of Laser Flash Technique for Thermal Diffusivity Measurement

    Energy Technology Data Exchange (ETDEWEB)

    Park, D. G.; Kim, H. M.; Hong, G. P

    2008-08-15

    In relation to selection of thermal conductivity measurement technology, various thermal conductivity measurement technique are investigated for characteristics of each technique and it's measurable range. For the related laser flash techniques, various technical characteristics are reviewed and discussed. Especially, Parker adiabatic model are reviewed because of importance for basic theory of the thermal diffusivity determination. Finite pulse time effect, heat loss effect and non-uniform heating effect, which are main technical factors for laser flash technique, are considered. Finally, characteristics of constituent elements for laser flash measurement system are reviewed and investigated in detail.

  17. Personal circumstances and social characteristics as determinants of landholder participation in biodiversity conservation programs.

    Science.gov (United States)

    Moon, Katie; Marshall, Nadine; Cocklin, Chris

    2012-12-30

    Adequate conservation of biodiversity on private land remains elusive due, in part, to a failure to understand the personal circumstances and social characteristics of private landholders. Our aim was to identify those personal and social dimensions of landholders that might contribute to improved conservation policy and program design and, thereby, participation in private land conservation. We tested whether personal circumstances of landholders (e.g., lifestyle and wellbeing, information and knowledge, financial security) and social characteristics (e.g., attitudes, norms, and trust) would be important predictors of landholders' capacity and willingness to participate in biodiversity conservation programs. Forty-five participants and twenty-nine non-participants of biodiversity conservation programs in north Queensland, Australia, were surveyed to: 1) examine differences between their personal circumstances and social characteristics that may influence participation; and 2) explore whether personal circumstances and social characteristics were influenced by participation. The results revealed that, compared to participants, non-participants in conservation programs had significantly different personal circumstances and social characteristics for four of eight measured variables. Compared to participants, non-participants demonstrated a reduced capacity and willingness to participate in conservation programs. Participation did not appear to have a strong influence on participants' personal circumstances or social characteristics, and when social norms supported conservation, programs did not demonstrate additionality. Conservation policies that maintain or improve landholders' personal circumstances and that promote pro-environmental norms may result in increased participation and thereby conservation outcomes. Copyright © 2012 Elsevier Ltd. All rights reserved.

  18. Performance expectations of measurement control programs

    International Nuclear Information System (INIS)

    Hammond, G.A.

    1985-01-01

    The principal index for designing and assessing the effectiveness of safeguards is the sensitivity and reliability of gauging the true status of material balances involving material flows, transfers, inventories, and process holdup. The measurement system must not only be capable of characterizing the material for gradation or intensity of protection, but also be responsive to needs for detection and localization of losses, provide confirmation that no diversion has occurred, and help meet requirements for process control, health and safety. Consequently, the judicious application of a measurement control and quality assurance program is vital to a complete understanding of the capabilities and limitations of the measurement system including systematic and random components of error for weight, volume, sampling, chemical, isotopic, and nondestructive determinations of material quantities in each material balance area. This paper describes performance expectations or criteria for a measurement control program in terms of ''what'' is desired and ''why'', relative to safeguards and security objectives

  19. Measurement control program for new special recovery

    International Nuclear Information System (INIS)

    Hsue, S.T.; Campbell, K.; Barlich, G.

    1987-04-01

    This report summarizes the design of the measurement control (MC) program for the New Special Recovery facility. The MC program is divided into two levels. Level 1 MC checks are performed at the individual instrument computer and will always be functional even when the instrument-control computer is down. The level 1 MCs are divided into statistical checks for both bias and precision, and diagnostic checks. All the instruments are connected on line to an instrument-control computer to which the measurement results can be communicated. Level 2 MC analyses are performed at this computer. The analyses consist of control charts for bias and precision and statistical tests used as analytic supplements to the control charts. They provide the desired detection sensitivity and yet can be interpreted quickly and easily. Recommendations are also made in terms of the frequency of the tests, the standard used, and other operational aspects of the MC program. 16 refs., 11 figs., 10 tabs

  20. Method and device for measuring formation characteristics of geological formations

    International Nuclear Information System (INIS)

    Antkiw, S.; Murphy, R.D.

    1981-01-01

    A well-logging system is described which uses a pulsed neutron source and which by combining measurements of gamma spectra and neutron characteristics enables such parameters as salinity, porosity, water saturation, lithology and schistosity to be registered directly. (JIW)

  1. Fundamental characteristics of the QFP measured by the dc SQUID

    International Nuclear Information System (INIS)

    Shimizu, N.; Harada, Y.; Miyamoto, N.; Hosoya, M.; Goto, E.

    1989-01-01

    This paper describes the fundamental characteristics of the Quantum Flux Parametron (QFP) measured by a new method in which the output signals of the QFP are detected with a dc SQUID. The dc SQUID linearly and continuously converts the output current of the QFP to voltage, allowing the output signal of the QFP to be measured as the voltage of the dc SQUID. Thus, the fundamental characteristics of the QFP have been experimentally confirmed in detail

  2. Method and apparatus for measuring thermal neutron characteristics

    International Nuclear Information System (INIS)

    Johnstone, C.W.

    1983-01-01

    The thermal neutron decay characteristics of an earth formation are measured by detecting indications of the thermal neutron concentration in the formation during a selected set of two measurement intervals following irradiation of the formation with a burst of fast neutrons. These measurement intervals may comprise a sequence of time gates following a delay after the neutron burst. The duration of the neutron bursts, of the delay between the burst and the start of the sequence, and of the individual time gates, may all be adjusted by a common, selected one of a finite number of scale factor values. The set of two measurement intervals is selected from among a number of possible sets as a function of a previously measured value of the decay characteristic. Each measurement interval set is used over only a specific range of decay characteristic values for which it has been determined, in accordance with a previously established relationship between the decay characteristic value and a function of the thermal neutron concentration measurements for the set, to afford enhanced statistical accuracy in the measured value of the decay characteristic. (author)

  3. Limitations and corrections in measuring dynamic characteristics of structural systems

    International Nuclear Information System (INIS)

    Walter, P.L.

    1978-10-01

    The work deals with limitations encountered in measuring the dynamic characteristics of structural systems. Structural loading and response are measured by transducers possessing multiple resonant frequencies in their transfer function. In transient environments, the resultant signals from these transducers are shown to be analytically unpredictable in amplitude level and frequency content. Data recorded during nuclear effects simulation testing on structures are analyzed. Results of analysis can be generalized to any structure which encounters dynamic loading. Methods to improve the recorded data are described which can be implemented on a frequency selective basis during the measurement process. These improvements minimize data distortion attributable to the transfer characteristics of the measuring transducers

  4. Characteristics of LEADER program for rural development in Romania

    Directory of Open Access Journals (Sweden)

    Klára - Dalma POLGÁR (DESZKE

    2015-06-01

    Full Text Available The LEADER program is the fourth axis of European Agricultural Fund for Rural Development (EAFRD. The paper presents its time scheduling, the importance for development of the rural areas in European Union and in Romania, the measures of financing and its double role as a component fund of EAFRD, and also as a delivery mechanism for measures of the other three axes of EAFRD. The paper shows the way of implementing LEADER program in Romania, during 2007-2013. The state of implementing of the Romanian contribution from EAFRD is presented for the entire period and until the end of 2014.

  5. Channel Measurements and Characteristics for Cooperative Positioning Applications

    DEFF Research Database (Denmark)

    Wang, Wei; Steinböck, Gerhard; Jost, Thomas

    2012-01-01

    We have conducted an indoor channel measurement campaign to characterize the propagation channel for the development of cooperative positioning algorithms. The campaign focused particularly on the characteristics of multi-link channels with applications to positioning. In this contribution we...... present the measurement campaign and preliminary results on correlation characteristics of the received power. It is observed that the link-pair log power is uncorrelated. Moreover, the received log power can be modeled by realizations of independent Gaussian distributions for each link, based...... on the measured results....

  6. Characteristics of Volunteer Coaches in a Clinical Process Improvement Program.

    Science.gov (United States)

    Morley, Katharine E; Barysauskas, Constance M; Carballo, Victoria; Kalibatas, Orinta; Rao, Sandhya K; Jacobson, Joseph O; Cummings, Brian M

    The Partners Clinical Process Improvement Leadership Program provides quality improvement training for clinicians and administrators, utilizing graduates as volunteer peer coaches for mentorship. We sought to understand the factors associated with volunteer coach participation and gain insight into how to improve and sustain this program. Review of coach characteristics from course database and survey of frequent coaches. Out of 516 Partners Clinical Process Improvement Leadership Program graduates from March 2010 to June 2015, 117 (23%) individuals volunteered as coaches. Sixty-one (52%) individuals coached once, 31 (27%) coached twice, and 25 (21%) coached 3 or more times. There were statistically significant associations between coaching and occupation (P = .005), Partners Clinical Process Improvement Leadership Program course taken (P = .001), and course location (P = .007). Administrators were more likely to coach than physicians (odds ratio: 1.75, P = .04). Reasons for volunteering as a coach included further development of skills, desire to stay involved with program, and enjoying mentoring. Reasons for repeated coaching included maintaining quality improvement skills, expanding skills to a wider variety of projects, and networking. A peer graduate volunteer coach model is a viable strategy for interprofessional quality improvement mentorship. Strategies that support repeat coaching and engage clinicians should be promoted to ensure an experienced and diversified group of coaches.

  7. Characteristics associated with US Walk to School programs

    Directory of Open Access Journals (Sweden)

    Neelon Brian

    2007-12-01

    Full Text Available Abstract Participation in Walk to School (WTS programs has grown substantially in the US since its inception; however, no attempt has been made to systematically describe program use or factors associated with implementation of environment/policy changes. Objective Describe the characteristics of schools' WTS programs by level of implementation. Methods Representatives from 450 schools from 42 states completed a survey about their WTS program's infrastructure and activities, and perceived impact on walking to school. Level of implementation was determined from a single question to which respondents reported participation in WTS Day only (low, WTS Day and additional programs (medium, or making policy/environmental change (high. Results The final model showed number of community groups involved was positively associated with higher level of implementation (OR = 1.78, 95%CI = 1.44, 2.18, as was funding (OR = 1.56, 95%CI = 1.26, 1.92, years of participation (OR = 1.44, 95% CI = 1.23, 1.70, and use of a walkability assessment (OR = 3.22, 95%CI = 1.84, 5.64. Implementation level was modestly associated with increased walking (r = 0.18. Conclusion Strong community involvement, some funding, repeat participation, and environmental audits are associated with progms that adopt environmental/policy change, and seem to facilitate walking to school.

  8. Emotion Monitoring – Verification of Physiological Characteristics Measurement Procedures

    OpenAIRE

    Landowska Agnieszka

    2014-01-01

    This paper concerns measurement procedures on an emotion monitoring stand designed for tracking human emotions in the Human-Computer Interaction with physiological characteristics. The paper addresses the key problem of physiological measurements being disturbed by a motion typical for human-computer interaction such as keyboard typing or mouse movements. An original experiment is described, that aimed at practical evaluation of measurement procedures performed at the emotion monitoring stand...

  9. Environmental Measurements Laboratory program review, December 1983

    International Nuclear Information System (INIS)

    Volchok, H.L.; de Planque, G.

    1984-03-01

    This volume contains all of the written material that was submitted to the panel of Reviewers in advance of a Program Review conducted by the US Department of Energy, Office of Health and Environmental Research at the Environmental Measurements Laboratory (EML) December 7-9, 1983. In addition to a general introduction there are nineteen papers grouped into the five broad program categories covering all of the scientific and engineering projects of the Laboratory: Natural Radioactivity and Radiation, Anthropogenic Radioactivity and Radiation, Non-nuclear, Quality Assurance, and Development and Support. These short articles, for the most part, focus on the rationale for EML's involvement in each project, emphasizing their relevance to the EML and Department of Energy missions. Project results and their interpretation were presented at the Review and can be found in the material referenced in this volume

  10. Measurements of the Characteristics of Transparent Material Using Digital Holography

    Directory of Open Access Journals (Sweden)

    Ding Yu

    2013-01-01

    Full Text Available Digital holography is applied to measure the characteristics of transparent material. A digital hologram recording system to measure the surface of transparent material was established, and the digital holograms of transparent object were obtained in high quality. For postprocessing of hologram, the least-squares phase unwrapping algorithm was used in phase unwrapping, and the phase reconstruction image of transparent object was obtained. The information of material surfaces was measured and the characteristic was presented in 3D visualization. The validation experiment was conducted by NanoMap 500LS system; the results of validation experiment are well satisfied with the measurement by digital holography, which proved the feasibility of digital holographic technology as a good measurement tool for transparent material.

  11. Impacts of the proposed program approach on waste stream characteristics

    International Nuclear Information System (INIS)

    King, J.F.; Fleming, M.E.

    1995-01-01

    The evolution of the U.S. Department of Energy's Civilian Radioactive Waste Management System (CRWMS) over the past few years has led to significant changes in key system scenario assumption. This paper describes the effects of two recent changes on waste stream characteristics focusing primarily on repository impacts. First, the multi-purpose canister (MPC) concept has been included in the Program baseline. The change from a bare fuel system to one including an MPC-based system forces the fuel assemblies initially loaded together in MPCs to remain together throughout the system. Second, current system analyses also assume a system without a monitored retrievable storage (MRS), with the understanding that an MRS would be reincorporated if a site becomes available. Together these two changes have significant impacts on waste stream characteristics. Those two changes create a class of scenarios referred to generally as Program Approach (PA) scenarios. Scenarios based on the previously assumed system, bare fuel with an MRS, are referred to here as the Previous Reference (PR) system scenarios. The analysis compares scenarios with otherwise consistent assumptions and presents summary comparisons. The number of disposal containers and the waste heat output are determined for eight PA and PR scenarios

  12. Method for Measuring Small Nonlinearities of Electric Characteristics

    DEFF Research Database (Denmark)

    Guldbrandsen, Tom; Meyer, Niels I; Schjær-Jacobsen, Jørgen

    1965-01-01

    A method is described for measuring very small deviations from linearity in electric characteristics. The measurement is based on the harmonics generated by the nonlinear element when subjected to a sine wave signal. A special bridge circuit is used to balance out the undesired harmonics...... of the signal generator together with the first harmonic frequency. The set-up measures the small-signal value and the first and second derivative with respect to voltage. The detailed circuits are given for measuring nonlinearities in Ohmic and capacitive components. In the Ohmic case, a sensitivity...

  13. Heterodyne detector for measuring the characteristic of elliptically polarized microwaves

    DEFF Research Database (Denmark)

    Leipold, Frank; Nielsen, Stefan Kragh; Michelsen, Susanne

    2008-01-01

    In the present paper, a device is introduced, which is capable of determining the three characteristic parameters of elliptically polarized light (ellipticity, angle of ellipticity, and direction of rotation) for microwave radiation at a frequency of 110 GHz. The device consists of two perpendicu......In the present paper, a device is introduced, which is capable of determining the three characteristic parameters of elliptically polarized light (ellipticity, angle of ellipticity, and direction of rotation) for microwave radiation at a frequency of 110 GHz. The device consists of two...... be calculated. Results from measured and calculated wave characteristics of an elliptically polarized 110 GHz microwave beam for plasma heating launched into the TEXTOR-tokamak experiment are presented. Measurement and calculation are in good agreement. ©2008 American Institute of Physics...

  14. Research program with no ''measurement problem''

    International Nuclear Information System (INIS)

    Noyes, H.P.; Gefwert, C.; Manthey, M.J.

    1985-07-01

    The ''measurement problem'' of contemporary physics is met by recognizing that the physicist participates when constructing and when applying the theory consisting of the formulated formal and measurement criteria (the expressions and rules) providing the necessary conditions which allow him to compute and measure facts, yet retains objectivity by requiring that these criteria, rules and facts be in corroborative equilibrium. We construct the particulate states of quantum physics by a recursive program which incorporates the non-determinism born of communication between asynchronous processes over a shared memory. Their quantum numbers and coupling constants arise from the construction via the unique 4-level combinatorial hierarchy. The construction defines indivisible quantum events with the requisite supraluminal correlations, yet does not allow supraluminal communication. Measurement criteria incorporate c, h-bar, and m/sub p/ or (not ''and'') G. The resulting theory is discrete throughout, contains no infinities, and, as far as we have developed it, is in agreement with quantum mechanical and cosmological fact

  15. Important Characteristics in an MBA Program: The Perceptions of Online MBA Students

    Science.gov (United States)

    Rydzewski, Danielle N.; Eastman, Jacqueline K.; Bocchi, Joseph

    2010-01-01

    This study examines characteristics important to online MBA students and alumni. The study looks at what characteristics are important in an online MBA Program and if the level of importance of these characteristics varies by demographic variables. The study focuses on availability, program quality, program length, cost, and courses in the…

  16. Measurement of characteristic X-rays by positron impact

    International Nuclear Information System (INIS)

    Nagashima, Y.; Saito, F.; Itoh, Y.; Goto, A.; Hyodo, T.

    2004-01-01

    An X-ray detector with thin Si(Li) crystals has been fabricated and employed to detect the characteristic X-rays by positron impact. Use of thin detector crystals is essential for the measurements of the characteristic X-rays induced by positron impact. Otherwise the background produced in the crystals by the annihilation γ-rays is too large to isolate the X-ray peaks. The data has been analyzed to obtain the inner-shell ionization cross sections by positron impact. (orig.)

  17. Faculty diversity programs in U.S. medical schools and characteristics associated with higher faculty diversity.

    Science.gov (United States)

    Page, Kathleen Raquel; Castillo-Page, Laura; Wright, Scott M

    2011-10-01

    To describe diversity programs for racial and ethnic minority faculty in U.S. medical schools and identify characteristics associated with higher faculty diversity. The authors conducted a cross-sectional survey study of leaders of diversity programs at 106 U.S. MD-granting medical schools in 2010. Main outcome measures included African American and Latino faculty representation, with correlations to diversity program characteristics, minority medical student representation, and state demographics. Responses were obtained from 82 of the 106 institutions (77.4%). The majority of the respondents were deans, associate and assistant deans (68.3%), members of minority ethnic/racial background (65.9% African American, 14.7% Latino), and women (63.4%). The average time in the current position was 6.7 years, with approximately 50% effort devoted to the diversity program. Most programs targeted medical trainees and faculty (63.4%). A majority of programs received monetary support from their institutions (82.9%). In bivariate analysis, none of the program characteristics measured were associated with higher than the mean minority faculty representation in 2008 (3% African American and 4.2% Latino faculty). However, minority state demographics in 2008, and proportion of minority medical students a decade earlier, were significantly associated with minority faculty representation. Medical student diversity 10 years earlier was the strongest modifiable factor associated with faculty diversity. Our results support intervening early to strengthen the minority medical student pipeline to improve faculty diversity. Schools located in states with low minority representation may need to commit additional effort to realize institutional diversity.

  18. Variation in school health policies and programs by demographic characteristics of US schools, 2006.

    Science.gov (United States)

    Balaji, Alexandra B; Brener, Nancy D; McManus, Tim

    2010-12-01

    To identify whether school health policies and programs vary by demographic characteristics of schools, using data from the School Health Policies and Programs Study (SHPPS) 2006. This study updates a similar study conducted with SHPPS 2000 data and assesses several additional policies and programs measured for the first time in SHPPS 2006. SHPPS 2006 assessed the status of 8 components of the coordinated school health model using a nationally representative sample of public, Catholic, and private schools at the elementary, middle, and high school levels. Data were collected from school faculty and staff using computer-assisted personal interviews and then linked with extant data on school characteristics. Results from a series of regression analyses indicated that a number of school policies and programs varied by school type (public, Catholic, or private), urbanicity, school size, discretionary dollars per pupil, percentage of white students, percentage of students qualifying for free lunch funds, and, among high schools, percentage of college-bound students. Catholic and private schools, smaller schools, and those with low discretionary dollars per pupil did not have as many key school health policies and programs as did schools that were public, larger, and had higher discretionary dollars per pupil. However, no single type of school had all key components of a coordinated school health program in place. Although some categories of schools had fewer policies and programs in place, all had both strengths and weaknesses. Regardless of school characteristics, all schools have the potential to implement a quality school health program. © Published 2010. This article is a US Government work and is in the public domain in the USA.

  19. Measurement of Static Characteristics Pneumatic Motors with Elastic Working Elements

    Directory of Open Access Journals (Sweden)

    Kamil FOJTÁŠEK

    2012-06-01

    Full Text Available Into a category of pneumatic motors with elastic working parts belong air bellows, diaphragm motors and fluid muscles. All three types of these motors have some elastic part usually made of rubber. This part is deformed under the pressure of a compressed air or a mass load resulting in a final working effect. This paper deals with measuring of static characteristics of these motors.

  20. Characteristics of dosemeter types for skin dose measurements in practice

    International Nuclear Information System (INIS)

    Van, D. J.; Bosmans, H.; Marchal, G.; Wambersie, A.

    2005-01-01

    A growing number of papers report deterministic effects in the skin of patients who have undergone interventional radiological procedures. Dose measurements, and especially skin dose measurements, are therefore increasingly important. Methods and acceptable dosemeters are, however, not clearly defined. This paper is the result of a literature overview with regard to assessing the entrance skin dose during radiological examinations by putting a dosemeter on the patient's skin. The relevant intrinsic characteristics, as well as some examples of clinical use of the different detector types, are presented. In this respect, thermoluminescence, scintillation, semiconductor and film dosemeters are discussed and compared with respect to their practical use. (authors)

  1. Evaluation of pump characteristic from measurement of fast deceleration

    Directory of Open Access Journals (Sweden)

    Himr Daniel

    2015-01-01

    Full Text Available Article describes an experiment where a pump connected to the simple hydraulic circuit is decelerated. Since the deceleration is fast enough the operating point of the machine moves from the initial steady position to the breaking zone, turbine zone and back to the new steady position. A dependence of the specific energy and the torque on the flow rate was evaluated from the measurement of the input and output pressure, torque and rotational speed recorded during the deceleration. Obtained characteristic is much wider than curves obtained from regular measurement of steady state.

  2. Measurements on wave propagation characteristics of spiraling electron beams

    Science.gov (United States)

    Singh, A.; Getty, W. D.

    1976-01-01

    Dispersion characteristics of cyclotron-harmonic waves propagating on a neutralized spiraling electron beam immersed in a uniform axial magnetic field are studied experimentally. The experimental setup consisted of a vacuum system, an electron-gun corkscrew assembly which produces a 110-eV beam with the desired delta-function velocity distribution, a measurement region where a microwave signal is injected onto the beam to measure wavelengths, and a velocity analyzer for measuring the axial electron velocity. Results of wavelength measurements made at beam currents of 0.15, 1.0, and 2.0 mA are compared with calculated values, and undesirable effects produced by increasing the beam current are discussed. It is concluded that a suitable electron beam for studies of cyclotron-harmonic waves can be generated by the corkscrew device.

  3. Emotion Monitoring – Verification of Physiological Characteristics Measurement Procedures

    Directory of Open Access Journals (Sweden)

    Landowska Agnieszka

    2014-12-01

    Full Text Available This paper concerns measurement procedures on an emotion monitoring stand designed for tracking human emotions in the Human-Computer Interaction with physiological characteristics. The paper addresses the key problem of physiological measurements being disturbed by a motion typical for human-computer interaction such as keyboard typing or mouse movements. An original experiment is described, that aimed at practical evaluation of measurement procedures performed at the emotion monitoring stand constructed at GUT. Different locations of sensors were considered and evaluated for suitability and measurement precision in the Human- Computer Interaction monitoring. Alternative locations (ear lobes and forearms for skin conductance, blood volume pulse and temperature sensors were proposed and verified. Alternative locations proved correlation with traditional locations as well as lower sensitiveness to movements like typing or mouse moving, therefore they can make a better solution for monitoring the Human-Computer Interaction.

  4. Dermatology Residency Selection Criteria with an Emphasis on Program Characteristics: A National Program Director Survey

    Directory of Open Access Journals (Sweden)

    Farzam Gorouhi

    2014-01-01

    Full Text Available Background. Dermatology residency programs are relatively diverse in their resident selection process. The authors investigated the importance of 25 dermatology residency selection criteria focusing on differences in program directors’ (PDs’ perception based on specific program demographics. Methods. This cross-sectional nationwide observational survey utilized a 41-item questionnaire that was developed by literature search, brainstorming sessions, and online expert reviews. The data were analyzed utilizing the reliability test, two-step clustering, and K-means methods as well as other methods. The main purpose of this study was to investigate the differences in PDs’ perception regarding the importance of the selection criteria based on program demographics. Results. Ninety-five out of 114 PDs (83.3% responded to the survey. The top five criteria for dermatology residency selection were interview, letters of recommendation, United States Medical Licensing Examination Step I scores, medical school transcripts, and clinical rotations. The following criteria were preferentially ranked based on different program characteristics: “advanced degrees,” “interest in academics,” “reputation of undergraduate and medical school,” “prior unsuccessful attempts to match,” and “number of publications.” Conclusions. Our survey provides up-to-date factual data on dermatology PDs’ perception in this regard. Dermatology residency programs may find the reported data useful in further optimizing their residency selection process.

  5. THE INFLUENCE OF EXPERIMENTAL PROGRAM OF PHYSICAL EDUCATION ON MORPHOLOGICAL CHARACTERISTICS OF MALE PUPILS

    Directory of Open Access Journals (Sweden)

    Nevenka Zrnzević

    2008-08-01

    Full Text Available The research purpose was to determine the effects of the experimental program of physical education on morphological characteristics of male pupils from the first-grade of primary school. The experimental program was carried out on the sample of 50 male pupils of the primary schools in Leposavic and Zvecan, age of 7 years ± 6 months. Morphological characteristics were estimated according to 13 variables (body height, total arm length, leg length, biacromial diameter, biiliocristal diameter, wrist width, chest circum ference, upper arm circum ference, upper leg circum ference, triceps skin fold, subscapular skin fold, abdomen skin fold and body mass. The results of the research were processed through standard procedures and basic descriptive parameters were calculated, and variations were determined using multi-variable analysis of variance (MAN′s and uni-variable analysis of variance (AN′s. Multivariable analysis of variance showed a significant statistic difference in morphological characteristics showed at initial and final measuring. On the basis of the results and discussion, it can be concluded that the experimental program has statistically significant effects on the changes of some morphological characteristics.

  6. Considering genetic characteristics in German Holstein breeding programs.

    Science.gov (United States)

    Segelke, D; Täubert, H; Reinhardt, F; Thaller, G

    2016-01-01

    Recently, several research groups have demonstrated that several haplotypes may cause embryonic loss in the homozygous state. Up to now, carriers of genetic disorders were often excluded from mating, resulting in a decrease of genetic gain and a reduced number of sires available for the breeding program. Ongoing research is very likely to identify additional genetic defects causing embryonic loss and calf mortality by genotyping a large proportion of the female cattle population and sequencing key ancestors. Hence, a clear demand is present to develop a method combining selection against recessive defects (e.g., Holstein haplotypes HH1-HH5) with selection for economically beneficial traits (e.g., polled) for mating decisions. Our proposed method is a genetic index that accounts for the allele frequencies in the population and the economic value of the genetic characteristic without excluding carriers from breeding schemes. Fertility phenotypes from routine genetic evaluations were used to determine the economic value per embryo lost. Previous research has shown that embryo loss caused by HH1 and HH2 occurs later than the loss for HH3, HH4, and HH5. Therefore, an economic value of € 97 was used against HH1 and HH2 and € 70 against HH3, HH4, and HH5. For polled, € 7 per polled calf was considered. Minor allele frequencies of the defects ranged between 0.8 and 3.3%. The polled allele has a frequency of 4.1% in the German Holstein population. A genomic breeding program was simulated to study the effect of changing the selection criteria from assortative mating based on breeding values to selecting the females using the genetic index. Selection for a genetic index on the female path is a useful method to control the allele frequencies by reducing undesirable alleles and simultaneously increasing economical beneficial characteristics maintaining most of the genetic gain in production and functional traits. Additionally, we applied the genetic index to real data and

  7. Radon Measurement Proficiency (RMP) Program methods and devices

    International Nuclear Information System (INIS)

    Harrison, J.; Hoornbeek, J.; Jalbert, P.; Sensintaffar, E.; Hopper, R.

    1991-01-01

    The US EPA developed the voluntary Radon Measurement Proficiency Program in 1986 in response to a Federal and State need for measurement services firms to demonstrate their proficiency with radon measurement methods and devices. Since that time, the program has set basic standards for the radon measurement industry. The program has grown dramatically since its inception. In 1986, fewer than 50 companies participated in the program. By 1989, more than 5,000 companies were participating. Participants represent firms with an analytical capability as well as firms that rely upon another firm for analysis service. Since the beginning of the RMP Program, the Agency has learned a great deal about radon measurement methods and devices. This paper reviews the measurement devices used in the program and what the EPA has learned about them since the program's inception. Performance data from the RMP Program are used to highlight relevant findings

  8. Characteristic features of net information measures for constrained Coulomb potentials

    International Nuclear Information System (INIS)

    Patil, S H; Sen, K D; Watson, N A; Jr, H E Montgomery

    2007-01-01

    The dimensional analyses of the position and momentum variance based quantum mechanical Heisenberg uncertainty measure and the other useful net entropic information measures for the bound states of two constrained Coulomb potentials are reported for the first time. The potentials describe an electron moving in the central field due to a nucleus of charge Z with radius R defining the constraints as (a) the truncated potential given by -Z/(r n +R n ) 1/n , and (b) the radius of the impenetrable spherical wall. The net information measures for the two potentials are explicitly shown to be independent of the scaling of the set [Z, R] at a fixed value of ZR. Analytic proof is presented, for the first time, showing the presence of a characteristic extremum in the variation of the net information entropy as a function of the radius R with its location scaling as Z -1 . Numerical results are presented which support the validity of the scaling properties

  9. Research on characteristics measurement of infrared defect tester

    Science.gov (United States)

    Zhang, Ke-jia; Zhang, Bi-feng; Xiong, Li-min; Zhou, Tao-geng; Zhang, Jun-chao; Meng, Hai-feng; Cai, Chuan; He, Ying-wei; Li, Xiao-hui; Wang, Chang-shi

    2017-10-01

    Based on a testing method of spatial frequency response(SFR), a setup for characteristics measurements of the infrared defect tester,which can also be called electroluminescence tester(EL tester), a machine examining defects of photovoltaic (PV) panel, was built. The influences of focusing plane adjustments and infrared light box arrangements on resolution measurement of EL tester in full field of view were analyzed. For different types of EL testers, portable and fixed, testing methods and procedures were presented. Especially, a novel testing method for portable EL was claimed, which could do the work well without reference background. Based on method claimed and setup built, the resolutions of different types of EL testers were obtained and stable results were achieved. This setup is portable designed to meet online measurements requirements of PV industry.

  10. Effects of Program and Patient Characteristics on Retention of Drug Treatment Patients.

    Science.gov (United States)

    Hser, Yih-Ing; Joshi, Vandana; Maglione, Margaret; Chou, Chih Ping; Anglin, M. Douglas

    2001-01-01

    Studied the effects of program and patient characteristics on patient retention in residential, out-patient, and methadone maintenance drug treatment programs. Data for 26,047 patients in 87 programs show that threshold retention rates were generally low for all 3 program types, although program practice and service provision played important…

  11. The analysis of students' characteristics related to the achievement in the introduction course to programming

    OpenAIRE

    Habjan, Klaudija

    2016-01-01

    In this Master thesis we look into students' characteristics which impact their success at introductory programming course. We want to define characteristics which are connected to and positively correlate with success at introductory programming course. The majority of novice students studying Computing on the Two-subject teacher program at the Faculty of Education, University of Ljubljana experience programming for the first time in this introductory programming course. Every year, stude...

  12. Characteristics and Effects of a Statewide STEM Program

    Directory of Open Access Journals (Sweden)

    Jeffrey D. Weld

    2015-10-01

    Full Text Available A comprehensive statewide STEM (science, technology, engineering, mathematics reform initiative enters its fifth year in the U.S. state of Iowa. A significant proportion of the state’s pre K-12 students and teachers participate in one or more of the twenty programs offered, ranging from classroom curricular innovations to teacher professional development, and from community STEM festivals to career exploration events. An external, inter-university evaluation consortium measures annual progress of the initiative through the Iowa STEM Monitoring Project. Results show citizens to be increasingly aware of and supporting of STEM education; students to be increasingly interested in STEM as well as outperforming nonparticipating peers on state math and science tests; and teachers more confident and knowledgeable in teaching STEM. Iowa’s STEM initiative has garnered national acclaim though challenges remain with regard to expanding the participation of learners of diversity, as well as ensuring the long-term sustainability of the programs and structures that define Iowa’s statewide STEM initiative.

  13. Fundamental Characteristics For Building Dymanics Obtained From Microtremors Measurements.

    Science.gov (United States)

    Enomoto, T.; Abeki, N.; Kuramochi, D.; Lanuza, A.; Gonzalez, J.; Schmitz, M.; Navarro, M.

    We are performing the international joint research investigations for the seismic disaster mitigation in Metro Manila between Philippine and Japan from 1994, in Caracas between Venezuela and Japan from 1996 and also in Almeria and Granada between Spain and Japan from 1996. We have made the microtremor measurements at Reinforced Concrete (RC) buildings existed in these cities and evaluated the dynamical characteristics of RC buildings, natural period and damping factor. Even if it·fs necessary to have some discussions about the accuracy of microtremor measurement in order to evaluate the dynamical characteristics because of small amplitude range phenomena. However, the microtremor measurement method is a simple, low cost and realistic method in order to observe and investigate the actual dynamical behavior for obtaining the useful information in many countries. In these international joint research works, we settled the main object to the getting useful information of building dynamical characteristics for the seismic disaster mitigation. So, we observed microtremors at the top floor of several kinds of buildings which have the different conditions, for examples, existed place, building type, dimensional scale and number of stories etc. Then we realized the evaluation of natural period and responded damping factor of building depending on the building conditions as a statistical tendencies. In this paper, mainly we would like to present the investigated results of regression relationship between the natural period of RC building and the number of stories in Philippine and Venezuela, respectively. and also, we summarized the relationship between the natural period of RC building and damping factor considering the surrounding soil condition. We thought that these relations are reasonable and believable results in the small amplitude range evaluated from microtremors.

  14. Measurement of AC electrical characteristics of SSC superconducting dipole magnets

    International Nuclear Information System (INIS)

    Smedley, K.M.; Shafer, R.E.

    1992-01-01

    Experiments were conducted to measure the AC electrical characteristics of SSC superconducting dipole magnets over the frequency range of 0.1 Hz to 10 kHz. A magnet equivalent circuit representing the magnet DC inductance, eddy current losses, coil-to-ground and turn-to-turn capacitance, was synthesized from the experimental data. This magnet equivalent circuit can be used to predict the current ripple distribution along the superconducting magnet string and can provide dynamic information for the design of the collider current regulation loop

  15. Grain centre mapping - 3DXRD measurements of average grain characteristics

    DEFF Research Database (Denmark)

    Oddershede, Jette; Schmidt, Søren; Lyckegaard, Allan

    2014-01-01

    characteristics of each grain (such as their centre-of-mass positions, volumes, phases, orientations and/or elastic strain tensor components), while the exact locations of the grain boundaries are unknown. In the present chapter a detailed description of the setup and software for both grain centre mapping...... and the closely related boxscan method is given. Both validation experiments and applications for in situ studies of microstructural changes during plastic deformation and crack growth are given. Finally an outlook with special emphasis on coupling the measured results with modelling is given....

  16. Orbital Debris and NASA's Measurement Program

    Science.gov (United States)

    Africano, J. L.; Stansbery, E. G.

    2002-05-01

    Since the launch of Sputnik in 1957, the number of manmade objects in orbit around the Earth has dramatically increased. The United States Space Surveillance Network (SSN) tracks and maintains orbits on over nine thousand objects down to a limiting diameter of about ten centimeters. Unfortunately, active spacecraft are only a small percentage ( ~ 7%) of this population. The rest of the population is orbital debris or ``space junk" consisting of expended rocket bodies, dead payloads, bits and pieces from satellite launches, and fragments from satellite breakups. The number of these smaller orbital debris objects increases rapidly with decreasing size. It is estimated that there are at least 130,000 orbital debris objects between one and ten centimeters in diameter. Most objects smaller than 10 centimeters go untracked! As the orbital debris population grows, the risk to other orbiting objects, most importantly manned space vehicles, of a collision with a piece of debris also grows. The kinetic energy of a solid 1 cm aluminum sphere traveling at an orbital velocity of 10 km/sec is equivalent to a 400 lb. safe traveling at 60 mph. Fortunately, the volume of space in which the orbiting population resides is large, collisions are infrequent, but they do occur. The Space Shuttle often returns to earth with its windshield pocked with small pits or craters caused by collisions with very small, sub-millimeter-size pieces of debris (paint flakes, particles from solid rocket exhaust, etc.), and micrometeoroids. To get a more complete picture of the orbital-debris environment, NASA has been using both radar and optical techniques to monitor the orbital debris environment. This paper gives an overview of the orbital debris environment and NASA's measurement program.

  17. FFTF reactor-characterization program: gamma-ray measurements and shield characterization

    International Nuclear Information System (INIS)

    Bunch, W.L.; Moore, F.S. Jr.

    1983-02-01

    A series of experiments is to be made during the acceptance test program of the Fast Flux Test Facility (FFTF) to measure the gamma ray characteristics of the Fast Test Reactor (FTR) and to establish the performance characteristics of the reactor shield. These measurements are a part of the FFTF Reactor Characterization Program (RCP). Detailed plans have been developed for these experiments. During the initial phase of the Characteristics Program, which will be carried out in the In-Reactor Thimble (IRT), both active and passive measurement methods will be employed to obtain as much information concerning the gamma ray environment as is practical. More limited active gamma ray measurements also will be made in the Vibration Open Test Assembly (VOTA)

  18. Measuring Satisfaction in the Program Manager, Procuring Contracting Officer Relationship

    Science.gov (United States)

    1997-12-01

    Contracting Officer) and one of her customers (a U. S. Navy Program Manager ). From an examination of this relationship , the most appropriate criteria... Customer Satisfaction, Performance Measurement, Metrics, Contracting, Program Management 17. SECURITY CLASSIFICATION OF REPORT Unclassified...methodology for developing an instrument to measure the satisfaction of their customers , Navy Program Managers . The purpose of this thesis was to develop

  19. Measuring the impact of antimicrobial stewardship programs

    NARCIS (Netherlands)

    Dik, Jan-Willem H.; Hendrix, Ron; Poelman, Randy; Niesters, Hubert G.; Postma, Maarten J.; Sinha, Bhanu; Friedrich, Alexander W.

    Antimicrobial Stewardship Programs (ASPs) are being implemented worldwide to optimize antimicrobial therapy, and thereby improve patient safety and quality of care. Additionally, this should counteract resistance development. It is, however, vital that correct and timely diagnostics are performed in

  20. Characteristics of Programs for Children with Deaf-Blindness: Results of a National Survey.

    Science.gov (United States)

    Bullis, Michael; Otos, Maurine

    1988-01-01

    A national survey of state coordinators of specialized service programs for children with deaf-blindness examined program characteristics including administrative structure, teacher certification requirements, technical assistance, eligibility determination, educational placement, curricula/instructional settings, transition, and unmet educational…

  1. Portable diffusion battery. It's application to measuring aerosol size characteristics

    International Nuclear Information System (INIS)

    Sinclair, D.

    1972-01-01

    A miniature portable cluster-tube diffusion battery for measurement of the size and size distribution of submicron aerosols (1-100 nm) is described. A series of commercially available Collimated Holes Structures are mounted in sleeves with O-rings so that aerosol penetration can be measured at a number of outlets along the series. The CHS are stainless-steel discs of several different diameters and thicknesses, containing a large number of nearly circular holes. The actual length of the apparatus is about 2 ft but the equivalent length is 3.25 mi. Calculated curves of penetration versus particle size are used to evaluate size distribution and show that the equivalent size frequently reported from one measurement with a rectangular diffusion battery is practically meaningless. The value depends as much on the characteristics and mode of the operation of the diffusion battery as on the aerosol; the longer the battery and the lower the air flow, the greater the equivalent size will appear to be. Graphical plots of the cumulative size distribution of room aerosol and silver aerosol are illustrated for large battery and miniature battery measurements and appear to be in close agreement. Measurements on radon daughters in uranium mines with the miniature batteries show activity median diameters from 0.1 to 0.17 micron, with standard deviations from 2 to 4. Two similar measurements made in the laboratory on room air tagged with about 50 pCi/l radon daughters show activity median diameters of 0.15 and 0.17 micron, with geometric standard deviations of 2.2 and 2.6, respectively

  2. Effects of a Program for Improving Biomechanical Characteristics During Walking and Running in Children Who Are Obese.

    Science.gov (United States)

    Steinberg, Nili; Rubinstein, Meron; Nemet, Dan; Ayalon, Moshe; Zeev, Aviva; Pantanowitz, Michal; Brosh, Tamar; Eliakim, Alon

    2017-10-01

    To investigate the influence of a weight-reduction program with locomotion-emphasis on improving biomechanical characteristics of children who are obese (OW). Ten children who are OW participated in a 6-month multidisciplinary childhood obesity management program (GRP1); another 10 children who are OW participated in the same multidisciplinary childhood obesity management program with additional locomotion-emphasis exercises for improving biomechanical characteristics (GRP2); and 10 control children who are OW with no intervention program. Outcomes were anthropometric measurements and temporal and foot pressure parameters. GRP2 had significantly improved foot pressure in the different walking/running speeds compared with GRP1. In the temporal parameters, pretests by speed by group interactions were significantly improved for GRP2 compared with GRP1. We found evidence to support beneficial effects of combined dietary and physical activity/locomotion-emphasis exercises on the movement characteristics of children who are OW.

  3. Measuring Satisfaction in the Program Manager, Procuring Contracting Officer Relationship

    National Research Council Canada - National Science Library

    Gray, John

    1997-01-01

    .... To comply with this Executive Order, Navy contracting offices require an effective methodology for developing an instrument to measure the satisfaction of their customers, Navy Program Managers...

  4. Measurement and Analysis of P2P IPTV Program Resource

    Directory of Open Access Journals (Sweden)

    Wenxian Wang

    2014-01-01

    Full Text Available With the rapid development of P2P technology, P2P IPTV applications have received more and more attention. And program resource distribution is very important to P2P IPTV applications. In order to collect IPTV program resources, a distributed multi-protocol crawler is proposed. And the crawler has collected more than 13 million pieces of information of IPTV programs from 2009 to 2012. In addition, the distribution of IPTV programs is independent and incompact, resulting in chaos of program names, which obstructs searching and organizing programs. Thus, we focus on characteristic analysis of program resources, including the distributions of length of program names, the entropy of the character types, and hierarchy depth of programs. These analyses reveal the disorderly naming conventions of P2P IPTV programs. The analysis results can help to purify and extract useful information from chaotic names for better retrieval and accelerate automatic sorting of program and establishment of IPTV repository. In order to represent popularity of programs and to predict user behavior and popularity of hot programs over a period, we also put forward an analytical model of hot programs.

  5. Measurement and analysis of P2P IPTV program resource.

    Science.gov (United States)

    Wang, Wenxian; Chen, Xingshu; Wang, Haizhou; Zhang, Qi; Wang, Cheng

    2014-01-01

    With the rapid development of P2P technology, P2P IPTV applications have received more and more attention. And program resource distribution is very important to P2P IPTV applications. In order to collect IPTV program resources, a distributed multi-protocol crawler is proposed. And the crawler has collected more than 13 million pieces of information of IPTV programs from 2009 to 2012. In addition, the distribution of IPTV programs is independent and incompact, resulting in chaos of program names, which obstructs searching and organizing programs. Thus, we focus on characteristic analysis of program resources, including the distributions of length of program names, the entropy of the character types, and hierarchy depth of programs. These analyses reveal the disorderly naming conventions of P2P IPTV programs. The analysis results can help to purify and extract useful information from chaotic names for better retrieval and accelerate automatic sorting of program and establishment of IPTV repository. In order to represent popularity of programs and to predict user behavior and popularity of hot programs over a period, we also put forward an analytical model of hot programs.

  6. Measurement control program for NDA instruments

    International Nuclear Information System (INIS)

    Hsue, S.T.; Marks, T.

    1983-01-01

    Measurement control checks for nondestructive assay instruments have been a constant and continuing concern at Los Alamos National Laboratory. This paper summarizes the evolution of the measurement control checks in the various high-resolution gamma systems we have developed. In-plant experiences with these systems and checks will be discussed. Based on these experiences, a set of measurement control checks is recommended for high-resolution gamma-ray systems

  7. Practical applications of the routine measuring program

    International Nuclear Information System (INIS)

    Busl, G.; Dehos, R.; Erl, S.; Kohl, R.; Pieper, H.; Winkovich, J.

    1989-01-01

    The colloquium participants were primarily concerned with discussing the tasks defined by Paragraph 3 of the Preventive Radiation Protection Act (StrVG). There are 23 papers in the proceedings focussing on the various tasks and their practical aspects, such as sampling, sample preparation, measurement and measuring techniques, data evaluation, and reporting and documentation. (HP) [de

  8. The influence of perceived characteristics of management development programs on employee outcomes.

    NARCIS (Netherlands)

    Ardts, J.C.A.; van der Velde, M.E.G.; Maurer, T.

    2010-01-01

    Employees’ perceptions of Management Development (MD) programs is the topic of this study. The purpose is to examine the influence of three important perceived characteristics of MD programs on relevant MD outcomes. The MD characteristics are: availability of role models, perceived control, and

  9. Characteristics of national and statewide health care-associated infection surveillance programs: A qualitative study.

    Science.gov (United States)

    Russo, Philip L; Havers, Sally M; Cheng, Allen C; Richards, Michael; Graves, Nicholas; Hall, Lisa

    2016-12-01

    There are many well-established national health care-associated infection surveillance programs (HAISPs). Although validation studies have described data quality, there is little research describing important characteristics of large HAISPs. The aim of this study was to broaden our understanding and identify key characteristics of large HAISPs. Semi-structured interviews were conducted with purposively selected leaders from national and state-based HAISPs. Interview data were analyzed following an interpretive description process. Seven semi-structured interviews were conducted over a 6-month period during 2014-2015. Analysis of the data generated 5 distinct characteristics of large HAISPs: (1) triggers: surveillance was initiated by government or a cooperative of like-minded people, (2) purpose: a clear purpose is needed and determines other surveillance mechanisms, (3) data measures: consistency is more important than accuracy, (4) processes: a balance exists between the volume of data collected and resources, and (5) implementation and maintenance: a central coordinating body is crucial for uniformity and support. National HAISPs are complex and affect a broad range of stakeholders. Although the overall goal of health care-associated infection surveillance is to reduce the incidence of health care-associated infection, there are many crucial factors to be considered in attaining this goal. The findings from this study will assist the development of new HAISPs and could be used as an adjunct to evaluate existing programs. Copyright © 2016 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

  10. Establishing a volumetric measurement control program

    International Nuclear Information System (INIS)

    Holt, S.H.; Jenkins, E.W.

    1993-01-01

    At the Savannah River Site (SRS), several facilities have nearly all their special nuclear material in solution and therefore, volume measurements play a key role in the accountability of these materials. Normally, facilities rely on frequent instrument calibrations, periodic tank calibrations and proper instrument configuration to ensure measurement control. At SRS, methods have been employed that go beyond these basic steps to monitor the volume measurement systems and provide real time indication of measurement control. These methods can be used to indicate if a tank requires recalibration, if there is a sampling problem, or if there is an instrument problem. The methods include: sample density comparison, in-tank to laboratory density comparison, redundant instrument comparison and tank to tank transfer comparison. This paper describes these methods and the generation of control charts to track these comparisons in real time

  11. Influence of school organizational characteristics on the outcomes of a school health promotion program.

    Science.gov (United States)

    Cullen, K W; Baranowski, T; Baranowski, J; Hebert, D; deMoor, C; Hearn, M D; Resnicow, K

    1999-11-01

    Researchers assessed the possible moderating effects of school organizational characteristics (school climate, school health, and job satisfaction) on outcomes of a teacher health behavior change program. Thirty-two public schools were matched and randomly assigned either to treatment or control conditions. Organizational, dietary, and physiologic data were collected from third to fifth grade teachers over three years. Treatment schools received a teacher wellness program for two years. Psychometrics of most organizational scales achieved acceptable levels of reliability. Mixed model analyses were conducted to test for moderating effects. Treatment schools with high organizational climate and health scores reported higher fruit and juice and vegetable consumption at Year 2 compared with intervention schools with low scores. Treatment schools with high job satisfaction scores reported higher fruit and juice and lower-fat food consumption at Year 3 compared with intervention schools with low scores. These measures may be used as a tool to assess the environment in which school health promotion programs are presented. Future interventions may need to be tailored to the organizational characteristics of schools.

  12. Computer Programs for Calculating and Plotting the Stability Characteristics of a Balloon Tethered in a Wind

    Science.gov (United States)

    Bennett, R. M.; Bland, S. R.; Redd, L. T.

    1973-01-01

    Computer programs for calculating the stability characteristics of a balloon tethered in a steady wind are presented. Equilibrium conditions, characteristic roots, and modal ratios are calculated for a range of discrete values of velocity for a fixed tether-line length. Separate programs are used: (1) to calculate longitudinal stability characteristics, (2) to calculate lateral stability characteristics, (3) to plot the characteristic roots versus velocity, (4) to plot the characteristic roots in root-locus form, (5) to plot the longitudinal modes of motion, and (6) to plot the lateral modes for motion. The basic equations, program listings, and the input and output data for sample cases are presented, with a brief discussion of the overall operation and limitations. The programs are based on a linearized, stability-derivative type of analysis, including balloon aerodynamics, apparent mass, buoyancy effects, and static forces which result from the tether line.

  13. Towards identifying programming expertise with the use of physiological measures

    DEFF Research Database (Denmark)

    Kontogiorgos, Dimosthenis; Manikas, Konstantinos

    2015-01-01

    In this position paper we propose means of measuring programming expertise on novice and expert programmers. Our approach is to measure the cognitive load of programmers while they assess Java/Python code in accordance with their experience in programming. Our hypothesis is that expert programmers...

  14. A Program to Generate a Particle Distribution from Emittance Measurements

    CERN Document Server

    Bouma, DS; Lallement, JB

    2010-01-01

    We have written a program to generate a particle distribution based on emittance measurements in x-x’ and y-y’. The accuracy of this program has been tested using real and constructed emittance measurements. Based on these tests, the distribution generated by the program can be used to accurately simulate the beam in multi-particle tracking codes, as an alternative to a Gaussian or uniform distribution.

  15. A Microfinance Program Targeting People Living with HIV in Uganda: Client Characteristics and Program Impact.

    Science.gov (United States)

    Linnemayr, Sebastian; Buzaalirwa, Lydia; Balya, James; Wagner, Glenn

    HIV has disproportionately affected economically vulnerable populations. HIV medical care, including antiretroviral therapy, successfully restores physical health but can be insufficient to achieve social and economic health. It may therefore be necessary to offer innovative economic support programs such as providing business training and microcredit tailored to people living with HIV/AIDS. However, microfinance institutions have shown reluctance to reach out to HIV-infected individuals, resulting in nongovernment and HIV care organizations providing these services. The authors investigate the baseline characteristics of a sample of medically stable clients in HIV care who are eligible for microcredit loans and evaluate their business and financial needs; the authors also analyze their repayment pattern and how their socioeconomic status changes after receipt of the program. The authors find that there is a significant unmet need for business capital for the sample under investigation, pointing toward the potentially beneficial role of providing microfinance and business training for clients in HIV care. HIV clients participating in the loans show high rates of repayment, and significant increases in (disposable) income, as well as profits and savings. The authors therefore encourage other HIV care providers to consider providing their clients with such loans.

  16. Software Programs Derive Measurements from Photographs

    Science.gov (United States)

    2012-01-01

    Even under the most unfortunate circumstances, NASA continues on a path of innovation. After the Space Shuttle Columbia reentered the atmosphere on February 1, 2003, it experienced a catastrophic failure, and the entire crew and vehicle were lost. For the two weeks prior to the accident, Columbia STS-107 was on a mission to perform physical, life, and space sciences research in the unique environment of microgravity. Following the accident, the remaining shuttles - Endeavor, Atlantis, and Discovery - were grounded, and an intense investigation ensued. The Columbia Accident Investigation Board spent nearly 7 months examining the cause of the accident and determining what would ensure a safe return to flight. To this end, investigators performed an extensive review down five analytic paths: aerodynamic, thermodynamic, sensor data timeline, debris reconstruction, and imaging. As part of the evaluation of all the available imagery from Columbia's ascent, orbit, and entry, investigators needed a new method for analyzing still video images to determine the size of the material that fell from Columbia, as well as the distance that the material traveled. John Lane, a scientist at Kennedy Space Center, devised a software program to calculate the unknown dimension of the material in the images, and soon after the investigation was complete, continued to enhance the technology. Eventually, the program that assisted in the Columbia investigation became available for licensing.

  17. Report of the supplementary measuring program Chernobyl

    International Nuclear Information System (INIS)

    Vaas, L.H.

    1988-06-01

    In this report, which is a continuation of the report of the Dutch Coordination Commission for measurement of Radioactivity and Xenobiotic materials (CCRX) ''Radioactive contamination in the Netherlands caused by the reactor accident in Chernobylsk'' of October 1986, the results are discussed of the supplementary measuring programme, till October 1st 1987, and a survey is given of the state of affairs with regard to the execution of the recommendations from the first Chernobylsk report. (H.W.). 53 refs.; 28 figs.; 50 tabs

  18. Toward Social Justice: The Characteristics of an Effective Mathematics Intervention Program for Urban Middle School Students

    Science.gov (United States)

    Bowens, Bryan D.; Warren, Susan R.

    2016-01-01

    This two-part investigation (a) assessed the impact of the Jaime Escalante Math Program (JEMP), a structured summer mathematics intervention program, on the math achievement of urban middle school students, (b) identified the characteristics of the program that the administrators and teachers perceived to contribute to student achievement, and (c)…

  19. Measurement problem in Program Universe. Revision

    International Nuclear Information System (INIS)

    Noyes, H.P.; Gefwert, C.; Manthey, M.J.

    1985-07-01

    The ''measurement problem'' of contemporary physics is in our view an artifact of its philosophical and mathematical underpinnings. We describe a new philosophical view of theory formation, rooted in Wittgenstein, and Bishop's and Martin-Loef's constructivity, which obviates such discussions. We present an unfinished, but very encouraging, theory which is compatible with this philosophical framework. The theory is based on the concepts of counting and combinatorics in the framework provided by the combinatorial hierarchy, a unique hierarchy of bit strings which interact by an operation called discrimination. Measurement criteria incorporate c, h-bar and m/sub p/ or (not ''and'') G. The resulting theory is discrete throughout, contains no infinities, and, as far as we have developed it, is in agreement with quantum mechanical and cosmological fact. 15 refs

  20. Measurement problem in Program Universe. Revision

    Science.gov (United States)

    Noyes, H. P.; Gefwert, C.; Manthey, M. J.

    1985-07-01

    The measurement problem of contemporary physics is in our view an artifact of its philosophical and mathematical underpinnings. We describe a new philosophical view of theory formation, rooted in Wittgenstein, and Bishop's and Martin-Loef's constructivity, which obviates such discussions. We present an unfinished, but very encouraging, theory which is compatible with this philosophical framework. The theory is based on the concepts of counting and combinatorics in the framework provided by the combinatorial hierarchy, a unique hierarchy of bit strings which interact by an operation called discrimination. Measurement criteria incorporate c, h-bar and m/sub p/ or (not and) G. The resulting theory is discrete throughout, contains no infinities, and, as far as we have developed it, is in agreement with quantum mechanical and cosmological fact.

  1. The Impact of Personal and Program Characteristics on the Placement of School Leadership Preparation Program Graduates in School Leader Positions

    Science.gov (United States)

    Fuller, Edward J.; Hollingworth, Liz; An, Brian P.

    2016-01-01

    Purpose: The purpose of this study is to examine the impact of personal and program characteristics on the placement of graduates of principal preparation programs in assistant principal, principal, and school leadership positions. Research Design: This study relies on Texas principal production data from 1993 through 2007 matched to employment…

  2. Characteristics of Information Systems and Business Informatics Study Programs

    Science.gov (United States)

    Helfert, Markus

    2011-01-01

    Over the last decade there is an intensive discussion within the Information Systems (IS) and Informatics community about the characteristics and identity of the discipline. Simultaneously with the discussion, there is an ongoing debate on essential skills and capabilities of IS and Business Informatics graduates as well as the profile of IS…

  3. Measurement of Two-Phase Flow Characteristics Under Microgravity Conditions

    Science.gov (United States)

    Keshock, E. G.; Lin, C. S.; Edwards, L. G.; Knapp, J.; Harrison, M. E.; Xhang, X.

    1999-01-01

    This paper describes the technical approach and initial results of a test program for studying two-phase annular flow under the simulated microgravity conditions of KC-135 aircraft flights. A helical coil flow channel orientation was utilized in order to circumvent the restrictions normally associated with drop tower or aircraft flight tests with respect to two-phase flow, namely spatial restrictions preventing channel lengths of sufficient size to accurately measure pressure drops. Additionally, the helical coil geometry is of interest in itself, considering that operating in a microgravity environment vastly simplifies the two-phase flows occurring in coiled flow channels under 1-g conditions for virtually any orientation. Pressure drop measurements were made across four stainless steel coil test sections, having a range of inside tube diameters (0.95 to 1.9 cm), coil diameters (25 - 50 cm), and length-to-diameter ratios (380 - 720). High-speed video photographic flow observations were made in the transparent straight sections immediately preceding and following the coil test sections. A transparent coil of tygon tubing of 1.9 cm inside diameter was also used to obtain flow visualization information within the coil itself. Initial test data has been obtained from one set of KC-135 flight tests, along with benchmark ground tests. Preliminary results appear to indicate that accurate pressure drop data is obtainable using a helical coil geometry that may be related to straight channel flow behavior. Also, video photographic results appear to indicate that the observed slug-annular flow regime transitions agree quite reasonably with the Dukler microgravity map.

  4. Workplace design: Conceptualizing and measuring workplace characteristics for motivation

    OpenAIRE

    Karanika-Murray, M.; Michaelides, George

    2015-01-01

    PURPOSE – Although both job design and its broader context are likely to drive motivation, little is known about the specific workplace characteristics that are important for motivation. The purpose of this paper is to present the Workplace Characteristics Model, which describes the workplace characteristics that can foster motivation, and the corresponding multilevel Workplace Design Questionnaire.\\ud \\ud DESIGN/METHODOLOGY/APPROACH – The model is configured as nine workplace attributes desc...

  5. 235U Holdup Measurement Program in support of facility shutdown

    International Nuclear Information System (INIS)

    Thomason, R.S.; Griffin, J.C.; Lien, O.G.; McElroy, R.D.

    1991-01-01

    In 1989, the Department of Energy directed shutdown of an enriched uranium processing facility at Savannah River Site. As part of the shutdown requirements, deinventory and cleanout of process equipment and nondestructive measurement of the remaining 235 U holdup were required. The holdup measurements had safeguards, accountability, and nuclear criticality safety significance; therefore, a technically defensible and well-documented holdup measurement program was needed. Appropriate standards were fabricated, measurement techniques were selected, and an aggressive schedule was followed. Early in the program, offsite experts reviewed the measurement program, and their recommendations were adopted. Contact and far-field methods were used for most measurements, but some process equipment required special attention. All holdup measurements were documented, and each report was subjected to internal peer review. Some measured values were checked against values obtained by other methods; agreement was generally good

  6. Development of a New Measurement for Team Communication Characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ar Ryum; Lee, Seung Woo; Kim, Hyoung Ju; Kang, Hyun Gook; Seong, Poong Hyun [KAIST, Daejeon (Korea, Republic of); Park, Jin Kyun [KAERI, Daejeon (Korea, Republic of)

    2011-08-15

    Operating crew which includes senior reactor operator (SRO), reactor operator (RO), turbine operator (TO), electrical operator (EO) and shift supervisor (SS) performs a task in main control room (MCR) in nuclear power plant. To perform a task adequately, each operator should not only carry out individual.s task but also cooperate with other operators. In this paper, a new measurement method based on Social Network Analysis (SNA) and speech act coding scheme for team communication characteristics is developed. Social network analysis describes structure and patters of relationships, and seeks to understand both their causes and consequences. It has two types of models which constitutes of graph models and matrix models. In the case of graph models, members of the network are represented as points or nodes, with lines (an arrow for directed model) drawn between pairs of nodes to show a relationship between them. In the case of matrix model, it presents a network in the form of an array of units arranged in row and columns. The row represents network members and the columns represent the same set of members in identical sequence of affiliation which is associated with members. In a cell of matrix model, one represents relationship between members and zero means no relationship. As a speech act coding scheme is the classification system of language act types that are embodied to concretize it, the contents of conversation may be classified in each type and applied to many areas. Using speech act coding scheme, the value in the cell of the matrix model and intensity of line of the graph model is counted. When social network analysis is extended, more information can be obtained such as direct or indirect relationship, team cohesion, team coordination, clique and etc. In this study, team communication characteristics are obtained using social network analysis. When the upper and lower is same, there is indirect relationship between members otherwise there is direct

  7. Development of a New Measurement for Team Communication Characteristics

    International Nuclear Information System (INIS)

    Kim, Ar Ryum; Lee, Seung Woo; Kim, Hyoung Ju; Kang, Hyun Gook; Seong, Poong Hyun; Park, Jin Kyun

    2011-01-01

    Operating crew which includes senior reactor operator (SRO), reactor operator (RO), turbine operator (TO), electrical operator (EO) and shift supervisor (SS) performs a task in main control room (MCR) in nuclear power plant. To perform a task adequately, each operator should not only carry out individual.s task but also cooperate with other operators. In this paper, a new measurement method based on Social Network Analysis (SNA) and speech act coding scheme for team communication characteristics is developed. Social network analysis describes structure and patters of relationships, and seeks to understand both their causes and consequences. It has two types of models which constitutes of graph models and matrix models. In the case of graph models, members of the network are represented as points or nodes, with lines (an arrow for directed model) drawn between pairs of nodes to show a relationship between them. In the case of matrix model, it presents a network in the form of an array of units arranged in row and columns. The row represents network members and the columns represent the same set of members in identical sequence of affiliation which is associated with members. In a cell of matrix model, one represents relationship between members and zero means no relationship. As a speech act coding scheme is the classification system of language act types that are embodied to concretize it, the contents of conversation may be classified in each type and applied to many areas. Using speech act coding scheme, the value in the cell of the matrix model and intensity of line of the graph model is counted. When social network analysis is extended, more information can be obtained such as direct or indirect relationship, team cohesion, team coordination, clique and etc. In this study, team communication characteristics are obtained using social network analysis. When the upper and lower is same, there is indirect relationship between members otherwise there is direct

  8. From mission to measures: performance measure development for a Teen Pregnancy Prevention Program.

    Science.gov (United States)

    Farb, Amy Feldman; Burrus, Barri; Wallace, Ina F; Wilson, Ellen K; Peele, John E

    2014-03-01

    The Office of Adolescent Health (OAH) sought to create a comprehensive set of performance measures to capture the performance of the Teen Pregnancy Prevention (TPP) program. This performance measurement system needed to provide measures that could be used internally (by both OAH and the TPP grantees) for management and program improvement as well as externally to communicate the program's progress to other interested stakeholders and Congress. This article describes the selected measures and outlines the considerations behind the TPP measurement development process. Issues faced, challenges encountered, and lessons learned have broad applicability for other federal agencies and, specifically, for TPP programs interested in assessing their own performance and progress. Published by Elsevier Inc.

  9. [Relationship between exercise adherence and personality characteristics in persons experienced in the Medical Fitness program].

    Science.gov (United States)

    Yamashita, Yuko; Seki, Nao; Umeda, Kimie; Tanabe, Naohito; Shinoda, Kunihiko; Konishi, Isamu; Sekiya, Akiyoshi; Sekii, Akiko; Ohta, Tamaki

    2017-01-01

    Objective We examined effective exercise adherence support methods for persons experienced in the Medical Fitness (MF) program to clarify the relation of personality traits with exercise adherence and the factors that improve exercise adherence.Methods Subjects were 283 adults who had registered as members in the MF program at an affiliate of Hospital A. We implemented an anonymous self-administered questionnaire by postal mail. Using the Japanese version of the Ten Item Personality Inventory (which contains 10 items that measure the Big Five personality traits), we evaluated the following characteristics: "Extraversion", "Agreeableness", "Conscientiousness", "Neuroticism", and "Openness". The subjects who reported exercising regularly at the time of survey were considered persons with subjective exercise adherence.Results In persons with subjective exercise adherence, "Conscientiousness" was significantly lower (P=0.003) among men and "Neuroticism" was significantly higher (P=0.018) among women when compared to persons with subjective exercise adherence. There was no correlation between the things that emphasize exercise adherence and "Conscientiousness" among men. There was a negative correlation between "can achieve goal" and "Neuroticism" among women.Conclusions It is essential to consider personality and gender differences when devising exercise adherence support measures for the MF program. Our results suggest that women with high neuroticism do not need "can achieve goal" to maintain their exercise habits; therefore, it is necessary to examine teaching methods that do not focus on only goal achievement as part of exercise adherence support for MF.

  10. Characteristics of Programs That Maximize Psychology Major Success

    Science.gov (United States)

    Stoloff, Michael L.; Good, Megan Rodgers; Smith, Kristen L.; Brewster, JoAnne

    2015-01-01

    We conducted a national survey of psychology department chairs, and, based on their responses, we concluded that psychology programs differ in the number of students enrolled in various types of classes; the degree of focus on each of the goals recommended by the "American Psychological Association (APA) Guidelines for an Undergraduate…

  11. The evolution of the State Children's Health Insurance Program (SCHIP) in New York: changing program features and enrollee characteristics.

    Science.gov (United States)

    Dick, Andrew W; Klein, Jonathan D; Shone, Laura P; Zwanziger, Jack; Yu, Hao; Szilagyi, Peter G

    2003-12-01

    . Cohort 1 included 2126 new CHPlus enrollees 0 to 13 years old who were enrolled for at least 9 months, stratified by geographic region. Cohort 2 included 1100 new SCHIP enrollees 0 to 13 years old who were enrolled for at least 9 months, stratified by geographic region, age, race, and ethnicity. Results were weighted to be representative of statewide CHPlus or SCHIP new enrollees who met the sampling criteria. Samples of age- and income-eligible children from New York State were drawn from the CPS and pooled and reweighted (1992-1994 and 1999-2001) to generate a comparison group of children targeted by CHPlus and SCHIP. Sociodemographic characteristics, race and ethnicity (white non-Hispanic, black non-Hispanic, and Hispanic), prior health insurance, health care access, and first source of information about the program. Weighted bivariate analyses (comparisons of means and rates) adjusted for the complex sampling design to compare measures between the 2 program cohorts and between the 2 CPS samples. We tested for equivalence by using chi2 statistics. As the program evolved from CHPlus to SCHIP, relatively more black and Hispanic children enrolled (9% to 30% black from 1994 to 2001, and 16% to 48% Hispanic), more New York City residents (46% to 69% from 1994 to 2001), more children with parents who had less than a high school education (10% to 25%), more children from lower income families (59% to 75% below 150% of the federal poverty level), and more children from families with parents not working (7% to 20%) enrolled. These socioeconomic and demographic changes were not reflected in the underlying age- and income-eligible population. A greater proportion of 2001 enrollees were uninsured for some time immediately before enrollment (57% to 76% had an uninsured gap), were insured by Medicaid during the year before enrollment (23% to 48%), and lacked a USC (5% to 14%). Although "word of mouth" was the most common means by which families heard about both programs, a greater

  12. Irradiation temperature measurements in the surveillance program

    International Nuclear Information System (INIS)

    Pav, T.; Krhounek, V.

    1991-01-01

    Evaluation of the diamond monitor method for the determination of the irradiation temperature in the surveillance programme of WWER-440 reactors is discussed. One of the difficulties with the practical application of the method is that the measured values of irradiation temperature are unlikely high. Using a thermodynamical model of the processes in the annealing of the irradiated diamond crystals, it was shown that experimental difficulties came from the principles of the method used. An analysis was performed of the thermal field inside the capsule of the surveillance chain in operational conditions, using the finite element method. The diamond monitor method was suggested to be eliminated from the surveillance programme and the use was proposed of the value of 273+-3 degC (as the most likely value) for the irradiation temperature of surveillance samples in WWER-440 reactors. (Z.S.). 3 tabs., 6 figs., 4 refs

  13. A review of characteristics and outcomes of Australia's undergraduate medical education rural immersion programs.

    Science.gov (United States)

    O'Sullivan, Belinda G; McGrail, Matthew R; Russell, Deborah; Chambers, Helen; Major, Laura

    2018-01-31

    A key strategy for increasing the supply of rural doctors is rurally located medical education. In 2000, Australia introduced a national policy to increase rural immersion for undergraduate medical students. This study aims to describe the characteristics and outcomes of the rural immersion programs that were implemented in Australian medical schools. Information about 19 immersion programs was sourced in 2016 via the grey and published literature. A scoping review of the published peer-reviewed studies via Ovid MEDLINE and Informit (2000-2016) and direct journal searching included studies that focused on outcomes of undergraduate rural immersion in Australian medical schools from 2000 to 2016. Programs varied widely by selection criteria and program design, offering between 1- and 6-year immersion. Based on 26 studies from 10 medical schools, rural immersion was positively associated with rural practice in the first postgraduate year (internship) and early career (first 10 years post-qualifying). Having a rural background increased the effects of rural immersion. Evidence suggested that longer duration of immersion also increases the uptake of rural work, including by metropolitan-background students, though overall there was limited evidence about the influence of different program designs. Most evidence was based on relatively weak, predominantly cross-sectional research designs and single-institution studies. Many had flaws including small sample sizes, studying internship outcomes only, inadequately controlling for confounding variables, not using metropolitan-trained controls and providing limited justification as to the postgraduate stage at which rural practice outcomes were measured. Australia's immersion programs are moderately associated with an increased rural supply of early career doctors although metropolitan-trained students contribute equal numbers to overall rural workforce capacity. More research is needed about the influence of student interest

  14. MEASURE CHARACTERISTICS OF MOTOR TESTS OF MOVEMENT FREQUENCY WITH STUDENT FROM MACEDONIA AND KOSOVO

    Directory of Open Access Journals (Sweden)

    Georgi Georgiev

    2014-06-01

    Full Text Available Introduction: The tests of good measure characteristics are a multiple matter of interest. They can be property used in the work of selecting young athletes as well as programming the physical activities and giving marks in classes. There are many authors who have conducted researches and established measure characteristics of motor tests. Measure characteristics are constantly an actual issue for research. This research was conducted with the aim of establishing and comparing the measure characteristics of the used motor tests of movement frequencies with 11-year-old students from Macedonia and Kosovo. Methods: The sample of respondents consists of 180 male students at the age of 11 (100 from Macedonia and 80 from Kosovo. They were tested with three composite motor tests to assess the movement frequency. For the obtained data there calculated: basic descriptive parameters, Pearson coefficient of correlation, factor analyse, Cronbach α and Spearman-Brown’s coefficients (Vincent, 2005. Results: On the based of the received results, it is obvious that regarding the three tests satisfactory measure characteristics are established (validity and reliability. Discussion: In kinesiology, by using motor tests, we indirectly form a concept about the motor abilities of the respondents. That is why, it is of great importance to use tests that have satisfactory measure characteristics. The used tests are recommended for application in assessing motor abilities’ movement frequency. The final results correspond to a great extent with the researches of Metikos et al, (1989, Georgiev (1996, 2007, Pireva (2013 and other. References: Georgiev G (1996. Definiranje na stepenot na faktorskata validnost, relijabilnost i drugi merni karakteristiki vo biomotorniot prostor kaj učenicite od dvata pola od 11-godišna vozrast. (Magisterski trud, Univerzitet “Sv. Kiril i Metodij”, Fakultet za fizička kultura, Skopje. Georgiev G (2007. Sport i nauka, 5, 224

  15. Status of beta measurement evaluation and upgrade program

    International Nuclear Information System (INIS)

    Swinth, K.L.

    1986-01-01

    In 1983, the US Department of Energy (DOE) initiated a program to evaluate and upgrade beta dosimetry capabilities at DOE and DOE-contractor facilities. The program has several elements which structure the development of improvements in beta measurement practices. In addition to Pacific Northwest Laboratory (PNL), universities, private corporations, and other DOE facilities are involved in the research efforts

  16. National radon measurement-proficiency program: Individual proficiency report

    International Nuclear Information System (INIS)

    1992-05-01

    In February 1986, the U.S. Environmental Protection Agency (EPA) established the Radon Measurement Proficiency (RMP) Program to assist the public in identifying organizations capable of providing reliable radon measurement services. In December 1991, EPA announced the new individual proficiency listing category in the RMP Program. Individuals applying for this new listing status must demonstrate knowledge of radon measurement fundamentals by passing a written proficiency examination, maintain affiliation with an RMP listed organization, and meet other program requirements. This report lists those individuals who have met the requirements of the RMP Program as of April 30, 1992. These requirements are designed to provide minimum proficiency criteria for individuals who provide radon measurement services on-site in a residential environment

  17. Measurement assurance program for LSC analyses of tritium samples

    International Nuclear Information System (INIS)

    Levi, G.D. Jr.; Clark, J.P.

    1997-01-01

    Liquid Scintillation Counting (LSC) for Tritium is done on 600 to 800 samples daily as part of a contamination control program at the Savannah River Site's Tritium Facilities. The tritium results from the LSCs are used: to release items as radiologically clean; to establish radiological control measures for workers; and to characterize waste. The following is a list of the sample matrices that are analyzed for tritium: filter paper smears, aqueous, oil, oily rags, ethylene glycol, ethyl alcohol, freon and mercury. Routine and special causes of variation in standards, counting equipment, environment, operators, counting times, samples, activity levels, etc. produce uncertainty in the LSC measurements. A comprehensive analytical process measurement assurance program such as JTIPMAP trademark has been implemented. The process measurement assurance program is being used to quantify and control many of the sources of variation and provide accurate estimates of the overall measurement uncertainty associated with the LSC measurements. The paper will describe LSC operations, process improvements, quality control and quality assurance programs along with future improvements associated with the implementation of the process measurement assurance program

  18. Relating Eye Activity Measures to Human Controller Remnant Characteristics

    NARCIS (Netherlands)

    Popovici, A; Zaal, P.M.T.; Pool, D.M.; Mulder, M.; Sawaragi, T

    2016-01-01

    This study attempts to partially explain the characteristics of the human perceptual remnant, following Levison’s representation of the remnant as an equivalent observation noise. Eye activity parameters are recorded using an eye tracker in two compensatory tracking tasks in which the visual

  19. Effect of a gymnastics program on sleep characteristics in pregnant women

    Directory of Open Access Journals (Sweden)

    Ildikó Kocsis

    2017-04-01

    Conclusion: The 10-week training program designed for pregnant women has an overall beneficial effect on sleep characteristics, not by improving them but by attenuating their general deterioration related to the progression of pregnancy. Our data strengthen the general recommendation regarding participation of pregnant women in specific exercise programs, mainly for maintaining their psycho-emotional and general well-being.

  20. Parent Involvement in Head Start Programs: The Role of Parent, Teacher and Classroom Characteristics

    Science.gov (United States)

    Castro, D.C.; Bryant, D.M.; Peisner-Feinberg, E.S.; Skinner, M.L.

    2004-01-01

    The purposes of this study were to determine the extent and types of parent involvement in Head Start programs, and to examine the relations between parent participation and family, teacher and classroom characteristics. Parents (n = 1131) and teachers (n = 59) from four Head Start programs participated. Data were gathered through volunteer logs,…

  1. Assessing errors related to characteristics of the items measured

    International Nuclear Information System (INIS)

    Liggett, W.

    1980-01-01

    Errors that are related to some intrinsic property of the items measured are often encountered in nuclear material accounting. An example is the error in nondestructive assay measurements caused by uncorrected matrix effects. Nuclear material accounting requires for each materials type one measurement method for which bounds on these errors can be determined. If such a method is available, a second method might be used to reduce costs or to improve precision. If the measurement error for the first method is longer-tailed than Gaussian, then precision might be improved by measuring all items by both methods. 8 refs

  2. Satellite data sets for the atmospheric radiation measurement (ARM) program

    Energy Technology Data Exchange (ETDEWEB)

    Shi, L.; Bernstein, R.L. [SeaSpace Corp., San Diego, CA (United States)

    1996-04-01

    This abstract describes the type of data obtained from satellite measurements in the Atmospheric Radiation Measurement (ARM) program. The data sets have been widely used by the ARM team to derive cloud-top altitude, cloud cover, snow and ice cover, surface temperature, water vapor, and wind, vertical profiles of temperature, and continuoous observations of weather needed to track and predict severe weather.

  3. The New Brunswick Laboratory Safeguards Measurement Evaluation Program

    International Nuclear Information System (INIS)

    Cacic, C.G.; Trahey, N.M.; Zook, A.C.

    1987-01-01

    The New Brunswick Laboratory (NBL) has been tasked by the U.S. Department of Energy (DOE) Office of Safeguards and Security (OSS) to assess and evaluate the adequacy of measurement technology as applied to materials accounting in DOE nuclear facilities. The Safeguards Measurement Evaluation (SME) Program was developed as a means to monitor and evaluate the quality and effectiveness of accounting measurements by site, material balance area (MBA), or unit process. Phase I of the SME Program, initiated during 1985, involved evaluation of the primary accountability measurement methods at six DOE Defense Programs facilities: Savannah River Plant, Portsmouth Gaseous Diffusion Plant, Y-12 Plant, Rocky Flats Plant, Rockwell Hanford Operations, and NBL. Samples of uranyl nitrate solution, dried plutonium nitrates, and plutonium oxides were shipped to the participants for assay and isotopic abundance measurements. Resulting data are presented and evaluated as indicators of current state-of-the-practice accountability measurement methodology, deficiencies in materials accounting practices, and areas for possible assistance in upgrading measurement capabilities. Continuing expansion of the SME Program to include materials which are representative of specific accountability measurement points within the DOE complex is discussed

  4. A Methodology to Measure Synergy Among Energy-Efficiency Programs at the Program Participant Level

    Energy Technology Data Exchange (ETDEWEB)

    Tonn, B.E.

    2003-11-14

    This paper presents a methodology designed to measure synergy among energy-efficiency programs at the program participant level (e.g., households, firms). Three different definitions of synergy are provided: strong, moderate, and weak. Data to measure synergy can be collected through simple survey questions. Straightforward mathematical techniques can be used to estimate the three types of synergy and explore relative synergistic impacts of different subsets of programs. Empirical research is needed to test the concepts and methods and to establish quantitative expectations about synergistic relationships among programs. The market for new energy-efficient motors is the context used to illustrate all the concepts and methods in this paper.

  5. Survival analysis to explore the characteristics of employee assistance program (EAP) referrals that remain employed.

    Science.gov (United States)

    Macdonald, S; Albert, W; Maynard, M; French, P

    1989-02-01

    This study examined characteristics of referrals to employee assistance programs (EAP) associated with subsequent termination of employment. As well, relationships between characteristics of the referrals and program characteristics were explored. Longitudinal data were collected at several time periods for 163 referrals to EAPs from five organizations. Survival analysis was conducted to determine which variables were associated with termination of employment. Females, cohabitating couples, and employees who worked for the organization for 5 or more years were most likely to remain employed. One interesting finding was that people with alcohol problems were significantly more likely to be formal referrals.

  6. Summary of neutron measurements for the Viking Program

    International Nuclear Information System (INIS)

    Anderson, M.E.

    1975-01-01

    The results of neutron measurements for 238 Pu-fueled, 683-W (thermal) capsules fabricated for the Viking Program (Mars Lander) are presented. These results include, for each capsule, the total neutron emission rate and neutron multiplication and, for one capsule, the neutron energy spectrum. A precision long counter was used for the neutron emission rate measurements and a single stilbene crystal for the neutron spectrum measurement. (U.S.)

  7. Electronic surveillance systems in infection prevention: organizational support, program characteristics, and user satisfaction.

    Science.gov (United States)

    Grota, Patti G; Stone, Patricia W; Jordan, Sarah; Pogorzelska, Monika; Larson, Elaine

    2010-09-01

    The use of electronic surveillance systems (ESSs) is gradually increasing in infection prevention and control programs. Little is known about the characteristics of hospitals that have a ESS, user satisfaction with ESSs, and organizational support for implementation of ESSs. A total of 350 acute care hospitals in California were invited to participate in a Web-based survey; 207 hospitals (59%) agreed to participate. The survey included a description of infection prevention and control department staff, where and how they spent their time, a measure of organizational support for infection prevention and control, and reported experience with ESSs. Only 23% (44/192) of responding infection prevention and control departments had an ESS. No statistically significant difference was seen in how and where infection preventionists (IPs) who used an ESS and those who did not spend their time. The 2 significant predictors of whether an ESS was present were score on the Organizational Support Scale (odds ratio [OR], 1.10; 95% confidence interval [CI], 1.02-1.18) and hospital bed size (OR, 1.004; 95% CI, 1.00-1.007). Organizational support also was positively correlated with IP satisfaction with the ESS, as measured on the Computer Usability Scale (P = .02). Despite evidence that such systems may improve efficiency of data collection and potentially improve patient outcomes, ESSs remain relatively uncommon in infection prevention and control programs. Based on our findings, organizational support appears to be a major predictor of the presence, use, and satisfaction with ESSs in infection prevention and control programs.

  8. Electronic surveillance systems in infection prevention: Organizational support, program characteristics, and user satisfaction

    Science.gov (United States)

    Grota, Patti G.; Stone, Patricia W.; Jordan, Sarah; Pogorzelska, Monika; Larson, Elaine

    2012-01-01

    Background The use of electronic surveillance systems (ESSs) is gradually increasing in infection prevention and control programs. Little is known about the characteristics of hospitals that have a ESS, user satisfaction with ESSs, and organizational support for implementation of ESSs. Methods A total of 350 acute care hospitals in California were invited to participate in a Web-based survey; 207 hospitals (59%) agreed to participate. The survey included a description of infection prevention and control department staff, where and how they spent their time, a measure of organizational support for infection prevention and control, and reported experience with ESSs. Results Only 23% (44/192) of responding infection prevention and control departments had an ESS. No statistically significant difference was seen in how and where infection preventionists (IPs) who used an ESS and those who did not spend their time. The 2 significant predictors of whether an ESS was present were score on the Organizational Support Scale (odds ratio [OR], 1.10; 95% confidence interval [CI], 1.02-1.18) and hospital bed size (OR, 1.004; 95% CI, 1.00-1.007). Organizational support also was positively correlated with IP satisfaction with the ESS, as measured on the Computer Usability Scale (P = .02). Conclusion Despite evidence that such systems may improve efficiency of data collection and potentially improve patient outcomes, ESSs remain relatively uncommon in infection prevention and control programs. Based on our findings, organizational support appears to be a major predictor of the presence, use, and satisfaction with ESSs in infection prevention and control programs. PMID:20176411

  9. Social network analysis of public health programs to measure partnership.

    Science.gov (United States)

    Schoen, Martin W; Moreland-Russell, Sarah; Prewitt, Kim; Carothers, Bobbi J

    2014-12-01

    In order to prevent chronic diseases, community-based programs are encouraged to take an ecological approach to public health promotion and involve many diverse partners. Little is known about measuring partnership in implementing public health strategies. We collected data from 23 Missouri communities in early 2012 that received funding from three separate programs to prevent obesity and/or reduce tobacco use. While all of these funding programs encourage partnership, only the Social Innovation for Missouri (SIM) program included a focus on building community capacity and enhancing collaboration. Social network analysis techniques were used to understand contact and collaboration networks in community organizations. Measurements of average degree, density, degree centralization, and betweenness centralization were calculated for each network. Because of the various sizes of the networks, we conducted comparative analyses with and without adjustment for network size. SIM programs had increased measurements of average degree for partner collaboration and larger networks. When controlling for network size, SIM groups had higher measures of network density and lower measures of degree centralization and betweenness centralization. SIM collaboration networks were more dense and less centralized, indicating increased partnership. The methods described in this paper can be used to compare partnership in community networks of various sizes. Further research is necessary to define causal mechanisms of partnership development and their relationship to public health outcomes. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. 47 CFR 2.1513 - Measurements of modulation characteristics.

    Science.gov (United States)

    2010-10-01

    ... AND RADIO TREATY MATTERS; GENERAL RULES AND REGULATIONS FCC Procedure for Testing Class A, B and S... waveform. Step (3) Measure the period (T) of the waveform. The period is the time difference between the... results will be obtained. Step (3) Measure the maximum voltage (Vmax), and the minimum voltage (Vmin) for...

  11. Measurements, characteristics, and origin of new electromagnetic interference on magnetocardiographic measurements

    International Nuclear Information System (INIS)

    Gu Hong-Fang; Cai Wen-Yan; Wei Yu-Ke; Liu Zheng-Hao; Wang Qian; Wang Yue; Dai Yuan-Dong; Ma Ping

    2012-01-01

    In order to eliminate the influence of the large-amplitude magnetic field noise that has complicated magnetocardiographic studies since October 2009, we have performed high-accuracy measurement of the environmental magnetic field noise in the vicinity of Beijing Subway Line 4 using a three-component height T c radio frequency (rf) superconducting quantum interference device (SQUID). By analysing the spatial form and other characteristics of the time and the frequency domains and by calculating the circumferential magnetic field distribution based on a duel-end feeding system model, we reach the following conclusions: (i) the main source of magnetic field noise is the magnetic field generated by the subway trains, and (ii) the magnetic field interference results mainly from the imbalance between traction current and return rail current that is caused by the leakage current. (general)

  12. Statistical characteristics of surrogate data based on geophysical measurements

    Directory of Open Access Journals (Sweden)

    V. Venema

    2006-01-01

    Full Text Available In this study, the statistical properties of a range of measurements are compared with those of their surrogate time series. Seven different records are studied, amongst others, historical time series of mean daily temperature, daily rain sums and runoff from two rivers, and cloud measurements. Seven different algorithms are used to generate the surrogate time series. The best-known method is the iterative amplitude adjusted Fourier transform (IAAFT algorithm, which is able to reproduce the measured distribution as well as the power spectrum. Using this setup, the measurements and their surrogates are compared with respect to their power spectrum, increment distribution, structure functions, annual percentiles and return values. It is found that the surrogates that reproduce the power spectrum and the distribution of the measurements are able to closely match the increment distributions and the structure functions of the measurements, but this often does not hold for surrogates that only mimic the power spectrum of the measurement. However, even the best performing surrogates do not have asymmetric increment distributions, i.e., they cannot reproduce nonlinear dynamical processes that are asymmetric in time. Furthermore, we have found deviations of the structure functions on small scales.

  13. Measuring the diffusion of innovative health promotion programs.

    Science.gov (United States)

    Steckler, A; Goodman, R M; McLeroy, K R; Davis, S; Koch, G

    1992-01-01

    Once a health promotion program has proven to be effective in one or two initial settings, attempts may be made to transfer the program to new settings. One way to conceptualize the transference of health promotion programs from one locale to another is by considering the programs to be innovations that are being diffused. In this way, diffusion of innovation theory can be applied to guide the process of program transference. This article reports on the development of six questionnaires to measure the extent to which health promotion programs are successfully disseminated: Organizational Climate, Awareness-Concern, Rogers's Adoption Variables, Level of Use, Level of Success, and Level of Institutionalization. The instruments are being successfully used in a study of the diffusion of health promotion/tobacco prevention curricula to junior high schools in North Carolina. The instruments, which measure the four steps of the diffusion process, have construct validity since they were developed within existing theories and are derived from the work of previous researchers. No previous research has attempted to use instruments like these to measure sequentially the stages of the diffusion process.

  14. Instrument for the measuring magnetic field characteristics of induction acceleration

    International Nuclear Information System (INIS)

    Novikov, V.M.; Romasheva, P.I.

    1976-01-01

    An instrument for the measuring instantaneous values of variable and pulsed magnetic fields with an amplitide of 0.005-2.0 and duration of 5x10 -6 -2x10 -2 sec is described. Time resolution is not less than 0.5 musec, measuring accuracy is about 1%. Induction coils are used as sensors. A digital voltmeter serves as a secondary recorder

  15. Dependency between removal characteristics and defined measurement categories of pellets

    Science.gov (United States)

    Vogt, C.; Rohrbacher, M.; Rascher, R.; Sinzinger, S.

    2015-09-01

    Optical surfaces are usually machined by grinding and polishing. To achieve short polishing times it is necessary to grind with best possible form accuracy and with low sub surface damages. This is possible by using very fine grained grinding tools for the finishing process. These however often show time dependent properties regarding cutting ability in conjunction with tool wear. Fine grinding tools in the optics are often pellet-tools. For a successful grinding process the tools must show a constant self-sharpening performance. A constant, at least predictable wear and cutting behavior is crucial for a deterministic machining. This work describes a method to determine the characteristics of pellet grinding tools by tests conducted with a single pellet. We investigate the determination of the effective material removal rate and the derivation of the G-ratio. Especially the change from the newly dressed via the quasi-stationary to the worn status of the tool is described. By recording the achieved roughness with the single pellet it is possible to derive the roughness expect from a series pellet tool made of pellets with the same specification. From the results of these tests the usability of a pellet grinding tool for a specific grinding task can be determined without testing a comparably expensive serial tool. The results are verified by a production test with a serial tool under series conditions. The collected data can be stored and used in an appropriate data base for tool characteristics and be combined with useful applications.

  16. The efficacy of stuttering measurement training: evaluating two training programs.

    Science.gov (United States)

    Bainbridge, Lauren A; Stavros, Candace; Ebrahimian, Mineh; Wang, Yuedong; Ingham, Roger J

    2015-04-01

    Two stuttering measurement training programs currently used for training clinicians were evaluated for their efficacy in improving the accuracy of total stuttering event counting. Four groups, each with 12 randomly allocated participants, completed a pretest-posttest design training study. They were evaluated by their counts of stuttering events on eight 3-min audiovisual speech samples from adults and children who stutter. Stuttering judgment training involved use of either the Stuttering Measurement System (SMS), Stuttering Measurement Assessment and Training (SMAAT) programs, or no training. To test for the reliability of any training effect, SMS training was repeated with the 4th group. Both SMS-trained groups produced approximately 34% improvement, significantly better than no training or the SMAAT program. The SMAAT program produced a mixed result. The SMS program was shown to produce a "medium" effect size improvement in the accuracy of stuttering event counts, and this improvement was almost perfectly replicated in a 2nd group. Half of the SMAAT judges produced a 36% improvement in accuracy, but the other half showed no improvement. Additional studies are needed to demonstrate the durability of the reported improvements, but these positive effects justify the importance of stuttering measurement training.

  17. Innovation in HIV prevention: organizational and intervention characteristics affecting program adoption.

    Science.gov (United States)

    Miller, R L

    2001-08-01

    A multiple case study design was used to explore the organizational characteristics of community-based organizations that provide HIV prevention programs and the criteria these organizations employ when judging the merits of externally-developed HIV prevention programs. In-depth interviews were conducted with organizational representatives of 38 randomly-selected HIV prevention providers throughout Illinois. Results indicated that there were three main types of adopting organizations: adopters of entire programs, adopters of program components and practices, and adopters of common ideas. These three types of organizations were distinguished by their level of organizational commitment to HIV prevention, organizational resources, and level of organizational maturity. Narrative data from the interviews are used to describe the dimensions that underlie the organizations' program adoption criteria. The criteria of merit used by these organizations to evaluate prevention programs provide partial empirical support for existing theories of technology transfer. Implications for designing and disseminating HIV prevention programs are discussed.

  18. Characteristics of the wire biconical antenna used for EMC measurements

    Science.gov (United States)

    Austin, Brian A.; Fourie, Andre P. C.

    1991-08-01

    The characteristics of a wire biconical antenna that determine its antenna factor were computed by using the method of moments code NEC-2. A fairly extensive validation exercise was conducted from which a suitable computer model was derived. The input impedance, gain, and radiation patterns of the antenna were computed for special cases where the biconical antenna is used above a conducting ground plane for open-field EMC (electromagnetic compatibility) testing. The effects of height above the ground plane and polarization of the antenna on these parameters were found and the antenna factor was corrected for them. The current distribution along the antenna elements was also examined, and it was found that significant pattern distortion can occur at some frequencies when a horizontal wire biconical antenna is used close to the ground. These results will allow this broadband antenna to be used with confidence in applications where previously only resonant dipoles were specified.

  19. The KFA TierPET: Performance characteristics and measurements

    International Nuclear Information System (INIS)

    Weber, S.; Herzog, H.; Mueller-Gaertner, H.W.

    1996-01-01

    We will present first results of the KFA Tier-PET, a positron emission tomograph with flexible geometry dedicated to in vivo studies of small animals. The flexible geometry allows us to change between measurements with high spatial resolution and measurements with increased sensitivity at the cost of resolution. The detectors consist of yttrium aluminum perovskit scintillator arrays which are glued together from 20 x 20 optically isolated crystals, coupled to position sensitive photomultiplier tubes. The fundamental design features concerning crystal dimensions and detector arrangement have been simulated. Based on this data, the definite dimensional outline of the crystals was determined. The YAP:Ce matrix in combination with a position sensitive photomultiplier leads to a detector block with a high spatial resolution. In first measurements a system sensitivity of 1.8 kcps/μCi/ml has been evaluated for a detector-to-detector distance of 16 cm

  20. Measurement and characteristics of microbial biomass in forest soils

    International Nuclear Information System (INIS)

    Vance, E.D.

    1986-01-01

    The soil microbial biomass is the primary agent responsible for the breakdown and mineralization of soil organic matter and plays a major role in regulating nutrient availability to plants. In this study, methods for measuring biomass in soil were compared and tested in forest soils ranging in pH from 3.2 to 7.2. A good relationship between biomass C measured using the chloroform fumigation-incubation method and soil ATP or microbial biomass C by direct microscopy was found in soils at or above pH 4.2. The fumigation-incubation method consistently underestimated biomass C in soils below pH 4.2, however. Hypotheses for the breakdown of the fumigation-incubation method in strongly acid soils were tested by using an alterative fumigant, measuring the proportion of added 14 C labelled fungi and bacteria decomposed in fumigated soils (k/sub C/), and by studying the effect of large, non-fumigated soil inocula on the flush of respiration following fumigation. These studies indicated that the failure of the method in strongly acid soils was due to inhibited decomposition of non-microbial soil organic matter by the microbial recolonizing population following fumigation. A modified method for measuring biomass C by fumigation-incubation in acid soils is proposed

  1. Use of radioactive sources in measuring characteristics of snowpacks

    Science.gov (United States)

    Henry W. Anderson; Philip M. McDonald; Lloyd W. Gay

    1963-01-01

    Use of radioactive probes inserted in mountain snowpacks may make possible more accurate appraisal and prediction of snowmelt water. Commercially available gamma and neutron probes were tested for their ability to measure snow density, ice lenses, and the thermal quality of individual layers in the snowpack.

  2. Measurement of β-glucan and other nutritional characteristics in ...

    African Journals Online (AJOL)

    Maiara

    2013-10-23

    Oct 23, 2013 ... of moisture by drying at 105°C for 06h00, determination of fat content by ether ... Calcium, magnesium, copper, zinc and iron were measured in. Atomic Absorption ..... A photometric adaptation of Somogyi method for the.

  3. The "Test of Financial Literacy": Development and Measurement Characteristics

    Science.gov (United States)

    Walstad, William B.; Rebeck, Ken

    2017-01-01

    The "Test of Financial Literacy" (TFL) was created to measure the financial knowledge of high school students. Its content is based on the standards and benchmarks stated in the "National Standards for Financial Literacy" (Council for Economic Education 2013). The test development process involved extensive item writing and…

  4. Optimized Estimation of Surface Layer Characteristics from Profiling Measurements

    Directory of Open Access Journals (Sweden)

    Doreene Kang

    2016-01-01

    Full Text Available New sampling techniques such as tethered-balloon-based measurements or small unmanned aerial vehicles are capable of providing multiple profiles of the Marine Atmospheric Surface Layer (MASL in a short time period. It is desirable to obtain surface fluxes from these measurements, especially when direct flux measurements are difficult to obtain. The profiling data is different from the traditional mean profiles obtained at two or more fixed levels in the surface layer from which surface fluxes of momentum, sensible heat, and latent heat are derived based on Monin-Obukhov Similarity Theory (MOST. This research develops an improved method to derive surface fluxes and the corresponding MASL mean profiles of wind, temperature, and humidity with a least-squares optimization method using the profiling measurements. This approach allows the use of all available independent data. We use a weighted cost function based on the framework of MOST with the cost being optimized using a quasi-Newton method. This approach was applied to seven sets of data collected from the Monterey Bay. The derived fluxes and mean profiles show reasonable results. An empirical bias analysis is conducted using 1000 synthetic datasets to evaluate the robustness of the method.

  5. Development of an Experimental Measurement System for Human Error Characteristics and a Pilot Test

    International Nuclear Information System (INIS)

    Jang, Tong-Il; Lee, Hyun-Chul; Moon, Kwangsu

    2017-01-01

    Some items out of individual and team characteristics were partially selected, and a pilot test was performed to measure and evaluate them using the experimental measurement system of human error characteristics. It is one of the processes to produce input data to the Eco-DBMS. And also, through the pilot test, it was tried to take methods to measure and acquire the physiological data, and to develop data format and quantification methods for the database. In this study, a pilot test to measure the stress and the tension level, and team cognitive characteristics out of human error characteristics was performed using the human error characteristics measurement and experimental evaluation system. In an experiment measuring the stress level, physiological characteristics using EEG was measured in a simulated unexpected situation. As shown in results, although this experiment was pilot, it was validated that relevant results for evaluating human error coping effects of workers’ FFD management guidelines and unexpected situation against guidelines can be obtained. In following researches, additional experiments including other human error characteristics will be conducted. Furthermore, the human error characteristics measurement and experimental evaluation system will be utilized to validate various human error coping solutions such as human factors criteria, design, and guidelines as well as supplement the human error characteristics database.

  6. Measurement and verification of low income energy efficiency programs in Brazil: Methodological challenges

    Energy Technology Data Exchange (ETDEWEB)

    Martino Jannuzzi, Gilberto De; Rodrigues da Silva, Ana Lucia; Melo, Conrado Augustus de; Paccola, Jose Angelo; Dourado Maia Gomes, Rodolfo (State Univ. of Campinas, International Energy Initiative (Brazil))

    2009-07-01

    Electric utilities in Brazil are investing about 80 million dollars annually in low-income energy efficiency programs, about half of their total compulsory investments in end-use efficiency programs under current regulation. Since 2007 the regulator has enforced the need to provide evaluation plans for the programs delivered. This paper presents the measurement and verification (MandV) methodology that has been developed to accommodate the characteristics of lighting and refrigerator programs that have been introduced in the Brazilian urban and peri-urban slums. A combination of household surveys, end-use measurements and metering at the transformers and grid levels were performed before and after the program implementation. The methodology has to accommodate the dynamics, housing, electrical wiring and connections of the population as well as their ability to pay for the electricity and program participation. Results obtained in slums in Rio de Janeiro are presented. Impacts of the programs were evaluated in energy terms to households and utilities. Feedback from the evaluations performed also permitted the improvement in the design of new programs for low-income households.

  7. Association between proportion of US medical graduates and program characteristics in gastroenterology fellowships.

    Science.gov (United States)

    Atsawarungruangkit, Amporn

    2017-01-01

    Gastroenterology is one of the most competitive internal medicine fellowship. However, factors that associated with program competitiveness have not been documented. The objective of this study was to evaluate associations between characteristics of gastroenterology fellowship programs and their competitiveness through the proportion of US medical graduates for the academic year 2016/17. This study used a retrospective, cross-sectional design with data obtained from the American Medical Association. The proportion of US medical graduates in gastroenterology fellowships was used as an indicator of program competitiveness. Using both univariate and multivariate linear regression analyses, we analyzed the association between the proportion of medical graduates in each program and 27 program characteristics based on a significance level of 0.05. In total, 153 out of 171 gastroenterology fellowship programs satisfied the inclusion criteria. A multivariate analysis revealed that a higher proportion of US medical graduates was significantly associated with five program characteristics: that it was a university-based program (p < 0.001), the ratio of full-time paid faculty to fellow positions (p < 0.001), the proportion of females in the program (p = 0.002), location in the Pacific region (p = 0.039), and a non-smoker hiring policy (p = 0.042). Among the five significant factors, being university based, located in the Pacific, and having a non-smoker hiring policy were likely to remain unchanged over a long period. However, program directors and candidates should pay attention to equivalence between full-time paid faculty and fellowship positions, and the proportion of women in the program. The former indicates the level of supervision while the latter has become increasingly important owing to the higher proportion of women in medicine.

  8. Comparison of Flight Measured, Predicted and Wind Tunnel Measured Winglet Characteristics on a KC-135 Aircraft

    Science.gov (United States)

    Dodson, R. O., Jr.

    1982-01-01

    One of the objectives of the KC-135 Winglet Flight Research and Demonstration Program was to obtain experimental flight test data to verify the theoretical and wind tunnel winglet aerodynamic performance prediction methods. Good agreement between analytic, wind tunnel and flight test performance was obtained when the known differences between the tests and analyses were accounted for. The flight test measured fuel mileage improvements for a 0.78 Mach number was 3.1 percent at 8 x 10(5) pounds W/delta and 5.5 percent at 1.05 x 10(6) pounds W/delta. Correcting the flight measured data for surface pressure differences between wind tunnel and flight resulted in a fuel mileage improvement of 4.4 percent at 8 x 10(5) pounds W/delta and 7.2 percent at 1.05 x 10(6) pounds W/delta. The performance improvement obtained was within the wind tunnel test data obtained from two different wind tunnel models. The buffet boundary data obtained for the baseline configuration was in good agreement with previous established data. Buffet data for the 15 deg cant/-4 deg incidence configuration showed a slight improvement, while the 15 deg cant/-2 deg incidence and 0 deg cant/-4 deg incidence data showed a slight deterioration.

  9. Survey of engineering computational methods and experimental programs for estimating supersonic missile aerodynamic characteristics

    Science.gov (United States)

    Sawyer, W. C.; Allen, J. M.; Hernandez, G.; Dillenius, M. F. E.; Hemsch, M. J.

    1982-01-01

    This paper presents a survey of engineering computational methods and experimental programs used for estimating the aerodynamic characteristics of missile configurations. Emphasis is placed on those methods which are suitable for preliminary design of conventional and advanced concepts. An analysis of the technical approaches of the various methods is made in order to assess their suitability to estimate longitudinal and/or lateral-directional characteristics for different classes of missile configurations. Some comparisons between the predicted characteristics and experimental data are presented. These comparisons are made for a large variation in flow conditions and model attitude parameters. The paper also presents known experimental research programs developed for the specific purpose of validating analytical methods and extending the capability of data-base programs.

  10. Concept, characteristics, and applications of important electrical measuring techniques

    International Nuclear Information System (INIS)

    Amberg, C.; Czaika, N.; Andreae, G.

    1978-01-01

    In the field of electrical measuring techniques the investigations were concentrated on the transducers. We investigated the time-temperature behaviour of the following transducers: The weldable, fully encapsulated high temperature strain gauges, inductance and transformer displacement transducers, and weldable capacitive strain transducers with distance sensor. A literatur-review showing the state of techniques reference the influence of nuclear radiation was put together. (orig./HP) [de

  11. Development of methods for measuring materials nuclear characteristics, Phases, I, II, II and IV

    International Nuclear Information System (INIS)

    Maglic, R.

    1963-04-01

    This report contains the following phases of the project 'measurement of nuclear characteristics of reactor materials': nuclear performances of the neutron chopper; method for measuring total effective cross sections by transmission method on the chopper; review of methods for measuring activation cross sections; measurement of neutron spectra of the RA reactor and measurement of total effective cross section of gold by using the chopper

  12. The Efficacy of Stuttering Measurement Training: Evaluating Two Training Programs

    Science.gov (United States)

    Bainbridge, Lauren A.; Stavros, Candace; Ebrahimian, Mineh; Wang, Yuedong; Ingham, Roger J.

    2015-01-01

    Purpose: Two stuttering measurement training programs currently used for training clinicians were evaluated for their efficacy in improving the accuracy of total stuttering event counting. Method: Four groups, each with 12 randomly allocated participants, completed a pretest-posttest design training study. They were evaluated by their counts of…

  13. Corporate characteristics and worksite health promotion programs: survey findings from Fortune 500 companies.

    Science.gov (United States)

    Hollander, R B; Lengermann, J J

    1988-01-01

    A study was carried out to assess the nature and extent of worksite health promotion programs in Fortune 500 companies. Growth and interest in worksite health promotion continues at a remarkable rate. Fortune 500 firms are a good barometer of the state of the art of programs in work settings because these companies have large numbers of employees, an interest in cost savings, and expertise to invest in innovative efforts. Data collection consisted of questionnaires sent to the medical officer or Chief Executive Officer of all companies appearing on the 1984 Fortune 500 list. The following issues were addressed: whether companies offered worksite programs; what health promotion activities were provided in their programs; whether organizations had plans to start up or expand programs; what organizational support existed for programs (i.e. who pays, on whose time employees participate, when activities are offered, and what types of personnel are hired to staff programs); and whether these companies applied needs assessments, evaluation and cost analysis in their programs. Differences in these characteristics were examined in relation to the organizational variables of size (number of employees), Fortune 500 rank and type of industry (low-technology versus high-technology). The response rate for the survey was 49.4% (n = 247). Results of the study indicate a high level of health promotion activity in Fortune 500 firms. Out of the total group of respondents, two-thirds (n = 164) report having worksite programs and two-thirds of organizations with programs have plans to expand their health promotion offerings. One-third of responding organizations without programs planned to initiate them. The health promotion activities provided are numerous and varied, and within units that have programs rates of employee eligibility are reported to be high. However, the participation rates reported are appreciably lower. It is of special interest that, in general, the higher ranked

  14. Method and apparatus for measuring underground fluid flow characteristics

    International Nuclear Information System (INIS)

    Paap, H.J.; Richter, A.P.; Peelman, H.E.; Arnold, D.M.; Scot, H.D.

    1979-01-01

    This invention relates to the use of neutron activation techniques to measure the azimuth and speed of the horizontal fluid flow in earth formations in the vicinity of a well borehole and the analysis of the resultant gamma radiation based on count rate data obtained as functions of horizontal direction and time. The apparatus consisting of a sonde (a downhole well logging tool) equipped with a neutron source, a gamma detector and a rotatable shield with collimator slot and the data processing equipment located at the surface, are described. (UK)

  15. Management characteristics of successful public health programs: "Avahan" HIV prevention program in India.

    Science.gov (United States)

    Mabuchi, Shunsuke; Singh, Suneeta; Bishnu, Rituparna; Bennett, Sara

    2013-01-01

    This paper analyzes Avahan, an HIV prevention program in India, that achieved very rapid scale-up. The paper aims to (i) define the distinctive features of the management of Avahan, (ii) examine how the distinctive features relate to key constructs in management frameworks and (iii) investigate how the management approaches of Avahan contributed to the program's ability to scale-up rapidly while maintaining service quality. The Delphi method was used to identify the distinctive features of Avahan. Through three rounds of questions, 38 participants closely associated with Avahan were asked to identify and develop consensus on its distinctive features. These features were then mapped against the Baldrige Health Care Criteria for Performance Excellence to investigate how they related to important dimensions of management. A total of 17 distinctive features of Avahan were identified. These distinctive features emphasized the importance of data use and performance monitoring at all levels, especially combined with a flexible management style that facilitated local responsiveness to community, innovation and learning. The distinctive features comprehensively addressed the criteria for management excellence in the Baldridge framework. In the case of Avahan, the rigorous application of known management techniques to public health programs appears to have been an important factor in the successful scale-up of the program. Also, the Baldrige criteria seem applicable to health programs in low-income and middle-income countries; further applications would help test their robustness and utility in such contexts. Copyright © 2012 John Wiley & Sons, Ltd.

  16. A Method for Measuring Sludge Settling Characteristics in Turbulent Flows

    DEFF Research Database (Denmark)

    Rasmussen, Michael R.; Larsen, Torben

    1996-01-01

    A method for the determination of the settlilng velocity for sludge as a funktion of turbulence intensity and sludge concentration has been developed. The principle of the method is to continuously feed the top of a settling column with sludge so that a steady state and uniform concentration...... distribution occurs in the middle of the column. This eliminates time scale effects such as flocculation from the measurements, as the resulting settling velocity only can be found at steady state and uniform conditions. The method assumes that flocculated sludge settles faster than disintegratedsludge to make...... a mass balance involving concentration at the top and the middle of the column as well as the inlet sludge flow. The resulting mass balance is used to calculate a lokal settling velocity. The turbulence is introduced by an oscillating grid in the whole depth of the settling column. Settling velocities...

  17. Measurement and monitoring technologies are important SITE program component

    International Nuclear Information System (INIS)

    Anon.

    1988-01-01

    An ongoing component of the Superfund Innovative Technologies Evaluation (SITE) Program, managed by the US EPA at its Hazardous Waste Engineering Research Laboratory in Cincinnati, is the development and demonstration of new and innovative measurement and monitoring technologies that will be applicable to Superfund site characterization. There are four important roles for monitoring and measurement technologies at Superfund sites: (1) to assess the extent of contamination at a site, (2) to supply data and information to determine impacts to human health and the environment, (3) to supply data to select the appropriate remedial action, and (4) to monitor the success or effectiveness of the selected remedy. The Environmental Monitoring Systems Laboratory in Las Vegas, Nevada (EMSL-LV) has been supporting the development of improved measurement and monitoring techniques in conjunction with the SITE Program with a focus on two areas: Immunoassay for toxic substances and fiber optic sensing for in-situ analysis at Superfund sites

  18. A Comparison of Centralized and Decentralized Inservice Education Programs: Teacher Involvement, Program Characteristics, and Job Satisfaction.

    Science.gov (United States)

    Perez, Roberto

    Inservice programs that are likely to accomplish their objectives are characterized by: (1) differentiated training experiences; (2) teachers in active roles; (3) an emphasis on demonstration, supervised trials, and feedback; (4) sharing and mutual assistance; (5) activities linked to a general effort of the school; (6) teachers who choose goals…

  19. Evolution characteristics and application of diamondoids in coal measures

    Directory of Open Access Journals (Sweden)

    Chenchen Fang

    2016-02-01

    Full Text Available As diamondoids have been used to evaluate petroleum and source rocks widely; their origin, evolution, and distribution in petroleum as well as source rocks have attracted ever more attention. Having finished the pyrolysis simulation experiment of the coal measure mudrocks from Xujiahe Formation, Sichuan Basin, results indicated that with the equivalent vitrinite reflectance (EasyRo increasing, diamondoids experience generation (1.0%  1.5%. Throughout the simulation experiment, diamondoid parameters MAI, EAI, and TMAI-1 kept good relationships with maturity within the range of EasyRo 1.5%–2.5%, 1.0%–2.5%, and 1.5%–2.5% respectively, with all of the correlation coefficient (R2 being above 0.7844, this indicated that these parameters can be used to evaluate maturity at these ranges. In addition, the yield ratios A/D, MA/MD, DMA/DMD, and As/Ds also kept good relationships with maturity at the range of EasyRo 1.2%–2.5%, with all of the R2 above 0.9236, this indicated that these ratios can be used to evaluate maturity index at this range.

  20. INDRA: a program system for calculating the neutronics and photonics characteristics of a fusion reactor blanket

    International Nuclear Information System (INIS)

    Perry, R.T.; Gorenflo, H.; Daenner, W.

    1976-01-01

    INDRA is a program system for calculating the neutronics and photonics characteristics of fusion reactor blankets. It incorporates a total of 19 different codes and 5 large data libraries. 10 of the codes are available from the code distribution organizations. Some of them, however, have been slightly modified in order to permit a convenient transfer of information from one program module to the next. The remaining 9 programs have been prepared by the authors to complete the system with respect to flexibility and to facilitate the handling of the results. (orig./WBU) [de

  1. THE NUCLEAR MATERIAL MEASUREMENT PROGRAM PLAN FOR GOSATOMNADZOR OF RUSSIA

    International Nuclear Information System (INIS)

    Bokov, Dmitry; Byers, Kenneth R.

    2003-01-01

    As the Russian State regulatory agency responsible for oversight of nuclear material control and accounting (MC and A), Gosatomnadzor of Russia determines the status of the MC and A programs at Russian facilites by testing the nuclear material inventory for accounting record accuracy. Currently, Gosatomnadzor is developing and implementing an approach to planning and conducting MC and A inspections using non-destructive assay (NDA) instruments that will provide for consistent application of MC and A measurement inspection objectives throughtout Russia. This Gosatomnadzor NDA Program Plan documents current NDA measurement capability in all regions of Gosatomnadzor; provides justification for upgrades to equipment, procedures and training; and defines the inspector-facility operator interface as it relates to NDA measurement equipment use. This plan covers a three-year measurement program cycle, but will be reviewed and updated annually to ensure that adequate inspection resources are available to meet the demands of the inspection schedule. This paper presents the elements of this plan and describes the process by which Gosatomnadzor ensures that its NDA instruments are effectively utilized, procedures are developed and certified, and inspection personnel are properly trained to provide assurance that Russian nuclear facilities are in compliance with Russian MC and A regulations.

  2. Certain Characteristics of iSchools Compared to Other LIS Programs

    Science.gov (United States)

    Wedgeworth, Robert

    2013-01-01

    This dissertation compares 17 iSchools and 36 other LIS schools that offer the ALA-accredited Master's degree program according to certain characteristics. The study compiles quantitative and qualitative data on 32 variables and sub-variables drawn from the schools' web sites, ALISE 2010 Statistical Report, and Elsevier's SCOPUS…

  3. Effects of Child Characteristics on the Outcomes of a Parent Support Program

    Science.gov (United States)

    Hudson, Alan; Reece, John; Cameron, Christine; Matthews, Jan

    2009-01-01

    Background: Previous research has reported on the effectiveness of the Signposts program for supporting families of children with an intellectual disability and difficult behaviour (Hudson et al., 2003; Hudson, Cameron, & Matthews, 2008). This paper reports on an investigation of the extent to which child characteristics moderate the…

  4. Effects of Cardio-Pilates Exercise Program on Physical Characteristics of Females

    Science.gov (United States)

    Sevimli, Dilek; Sanri, Murat

    2017-01-01

    Aim: This study aims to investigate the effects of four weeks cardio-Pilates exercise program on physical characteristics in females. Material and methods: The total 40 female participants were tested before and after four weeks regular exercise of 3 × 1 hr. sessions/week. Body height and weight, waist and hip circumferences, body fat percent and…

  5. The Effects of Academic Programs and Institutional Characteristics on Postgraduate Civic Engagement Behavior

    Science.gov (United States)

    Ishitani, Terry T.; McKitrick, Sean A.

    2013-01-01

    While monetary benefits from higher education are extensive, there appears to be an absence of empirical evidence on how higher education contributes to civic engagement behavior after college. This study investigated the relationship between college characteristics of students completing a bachelor's degree, such as academic programs and…

  6. A measurement evaluation program to support nuclear material control and accountability measurements in Brazilian laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Dias, Fabio C., E-mail: fabio@ird.gov.br [Comissao Nacional de Energia Nuclear (CNEN-RJ), Rio de Janeiro, RJ (Brazil); Mason, Peter, E-mail: peter.mason@ch.doe.gov [New Brunswick Laboratory (DOE/NBL), Argonne, IL (United States)

    2013-07-01

    A measurement evaluation program (MEP) is one of a number of valuable tools that analytical chemists can use to ensure that the data produced in the laboratory are fit for their intended purpose and consistent with expected performance values at a given time. As such, participation in a MEP is an important indicator of the quality of analytical data, and is recognized as such by independent regulatory and/or accreditation bodies. With the intent to implement such a program in Brazil, in November 2012 the Nuclear Energy Commission of Brazil (CNEN), with support from the Department of Energy of the United States' (US-DOE International Safeguards and Engagement Program), decided to initiate a technical cooperation project aiming at organizing a Safeguards Measurement Evaluation Program (SMEP) for Brazilian facilities. The project, entitled Action Sheet 23, was formalized under the terms of the Agreement between the US-DOE and the CNEN concerning research and development in nuclear material control, accountancy, verification, physical protection, and advanced containment and surveillance technologies for International Safeguards Applications. The work, jointly performed by the CNEN's Safeguards Laboratory (LASAL) and the New Brunswick Laboratory (NBL), has the objective to strengthen the traceability of accountability measurements and ensure adequate quality of safeguards measurements for facilities within Brazil, utilizing test samples characterized and provided by NBL. Recommendations to participants included measurement frequency, number of results per sample and format for reporting results using ISO methods for calculating and expressing measurement uncertainties. In this paper, we discuss the main steps taken by CNEN and NBL aiming at implementing such a program and the expected results, in particular the impact of uncertainty estimation on the evaluation of performance of each participant laboratory. The program is considered by Brazilian safeguards

  7. A measurement evaluation program to support nuclear material control and accountability measurements in Brazilian laboratories

    International Nuclear Information System (INIS)

    Dias, Fabio C.; Mason, Peter

    2013-01-01

    A measurement evaluation program (MEP) is one of a number of valuable tools that analytical chemists can use to ensure that the data produced in the laboratory are fit for their intended purpose and consistent with expected performance values at a given time. As such, participation in a MEP is an important indicator of the quality of analytical data, and is recognized as such by independent regulatory and/or accreditation bodies. With the intent to implement such a program in Brazil, in November 2012 the Nuclear Energy Commission of Brazil (CNEN), with support from the Department of Energy of the United States' (US-DOE International Safeguards and Engagement Program), decided to initiate a technical cooperation project aiming at organizing a Safeguards Measurement Evaluation Program (SMEP) for Brazilian facilities. The project, entitled Action Sheet 23, was formalized under the terms of the Agreement between the US-DOE and the CNEN concerning research and development in nuclear material control, accountancy, verification, physical protection, and advanced containment and surveillance technologies for International Safeguards Applications. The work, jointly performed by the CNEN's Safeguards Laboratory (LASAL) and the New Brunswick Laboratory (NBL), has the objective to strengthen the traceability of accountability measurements and ensure adequate quality of safeguards measurements for facilities within Brazil, utilizing test samples characterized and provided by NBL. Recommendations to participants included measurement frequency, number of results per sample and format for reporting results using ISO methods for calculating and expressing measurement uncertainties. In this paper, we discuss the main steps taken by CNEN and NBL aiming at implementing such a program and the expected results, in particular the impact of uncertainty estimation on the evaluation of performance of each participant laboratory. The program is considered by Brazilian safeguards authorities

  8. Classification of methods for measuring current-voltage characteristics of semiconductor devices

    Directory of Open Access Journals (Sweden)

    Iermolenko Ia. O.

    2014-06-01

    Full Text Available It is shown that computer systems for measuring current-voltage characteristics are very important for semiconductor devices production. The main criteria of efficiency of such systems are defined. It is shown that efficiency of such systems significantly depends on the methods for measuring current-voltage characteristics of semiconductor devices. The aim of this work is to analyze existing methods for measuring current-voltage characteristics of semiconductor devices and to create the classification of these methods in order to specify the most effective solutions in terms of defined criteria. To achieve this aim, the most common classifications of methods for measuring current-voltage characteristics of semiconductor devices and their main disadvantages are considered. Automated and manual, continuous, pulse, mixed, isothermal and isodynamic methods for measuring current-voltage characteristics are analyzed. As a result of the analysis and generalization of existing methods the next classification criteria are defined: the level of automation, the form of measurement signals, the condition of semiconductor device during the measurements, and the use of mathematical processing of the measurement results. With the use of these criteria the classification scheme of methods for measuring current-voltage characteristics of semiconductor devices is composed and the most effective methods are specified.

  9. Penempatan Optimal Phasor Measurement Unit (PMU) Dengan Integer Programming

    OpenAIRE

    Amrulloh, Yunan Helmy

    2013-01-01

    Phasor Measurement Unit (PMU) merupakan peralatan yang mampu memberikan pengukuran fasor tegangan dan arus secara real-time. PMU dapat digunakan untuk monitoring, proteksi dan kontrol pada sistem tenaga listrik. Tugas akhir ini membahas penempatan PMU secara optimal berdasarkan topologi jaringan sehingga sistem tenaga listrik dapat diobservasi. Penempatan optimal PMU dirumuskan sebagai masalah Binary Integer Programming (BIP) yang akan memberikan variabel dengan pilihan nilai (0,1) yang menu...

  10. Security Measures in Automated Assessment System for Programming Courses

    Directory of Open Access Journals (Sweden)

    Jana Šťastná

    2015-12-01

    Full Text Available A desirable characteristic of programming code assessment is to provide the learner the most appropriate information regarding the code functionality as well as a chance to improve. This can be hardly achieved in case the number of learners is high (500 or more. In this paper we address the problem of risky code testing and availability of an assessment platform Arena, dealing with potential security risks when providing an automated assessment for a large set of source code. Looking at students’ programs as if they were potentially malicious inspired us to investigate separated execution environments, used by security experts for secure software analysis. The results also show that availability issues of our assessment platform can be conveniently resolved with task queues. A special attention is paid to Docker, a virtual container ensuring no risky code can affect the assessment system security. The assessment platform Arena enables to regularly, effectively and securely assess students' source code in various programming courses. In addition to that it is a motivating factor and helps students to engage in the educational process.

  11. Association between postgraduate year 2 residency program characteristics and primary project publication.

    Science.gov (United States)

    Swanson, Joseph M; Shafeeq, Hira; Hammond, Drayton A; Li, Chenghui; Devlin, John W

    2018-03-15

    The association among residency program and research mentor characteristics, program director perceptions, and the publication of the primary research project for postgraduate year 2 (PGY2) graduates was assessed. Using a validated electronic survey, residency program directors (RPDs) of critical care PGY2 graduates were asked about primary research project publication success, program and research project mentor characteristics, and RPDs' perceptions surrounding project completion. All 55 RPDs surveyed responded; 44 (79%) reported being a research project mentor. PGY2 research project publications in 2011 and 2012 totaled 26 (37%) and 27 (35%), respectively. A significant relationship existed between research project publication and the number of residents in the program ( p project publication is important to their employer ( p projects versus no publications included the number of graduates in the PGY2 program (odds ratio [OR], 5.6; p project publication (OR, 10.2; p project versus no research projects was also independently associated with the RPD's perception that the employer valued research project publication (OR, 5.1; p = 0.04). A survey of RPDs of critical care PGY2 residents found that the number of PGY2 residents, the number of publications by the least experienced research mentor, and the perception that publishing the residents' research projects is important to the employer were independently associated with publication rates of residency research projects. Copyright © 2018 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

  12. Relating Therapist Characteristics to Client Engagement and the Therapeutic Alliance in an Adolescent Custodial Group Substance Misuse Treatment Program.

    Science.gov (United States)

    Daniels, Rachael Anne; Holdsworth, Emma; Tramontano, Carlo

    2017-07-29

    Client engagement in substance misuse treatment programs is directly associated with positive treatment outcomes. The nature of these programs means there are often difficulties engaging and retaining clients, but authors have consistently found a strong therapeutic alliance is associated with client engagement. While research has focused on the association between the alliance and engagement, the factors that influence the therapeutic alliance have received less attention. To examine therapists' characteristics, namely therapists' stress and empathy levels, as potential predictors of client engagement and the therapeutic alliance, within an adolescent substance misuse group treatment program. The sample included 84 adolescent clients and 14 therapists from a Secure Training Centre in England. Client engagement in the treatment program was observed, while self-reporting measures assessed the therapeutic alliance (client and therapist-rated), and therapists' stress and empathy levels. Multiple regression analysis revealed that therapists' stress levels negatively influenced the therapeutic alliance and had a curvilinear relationship with client engagement, indicating that stress is not exclusively negatively related to engagement. Although stress was found to negatively impact both cognitive and affective empathy, neither cognitive nor affective empathy were significantly related to client engagement or the therapeutic alliance. This study demonstrates the importance of therapist characteristics on client engagement and the therapeutic alliance. Within practice stress can have a positive impact on clients' engagement. Nevertheless, therapists may need additional support to deal with stress effectively. Therapists' empathy may too be fundamental to client engagement, but only it if is perceived by clients.

  13. The relationship between employer health insurance characteristics and the provision of employee assistance programs.

    Science.gov (United States)

    Zarkin, G A; Garfinkel, S A

    1994-01-01

    Workplace drug and alcohol abuse imposes substantial costs on employers. In response, employers have implemented a variety of programs to decrease substance abuse in the workplace, including drug testing, health and wellness programs, and employee assistance programs (EAPs). This paper focuses on the relationship between enterprises' organizational and health insurance characteristics and the firms' decisions to provide EAPs. Using data from the 1989 Survey of Health Insurance Plans (SHIP), sponsored by the Health Care Financing Administration (HCFA), we estimated the prevalence of EAPs by selected organizational and health insurance characteristics for those firms that offer health insurance to their workers. In addition, we estimated logistic models of the enterprises' decisions to provide EAPs as functions of the extent of state substance abuse and mental health insurance mandates, state-level demographic variables, and organizational and health insurance characteristics. Our results suggest that state mandates and demographic variables, as well as organizational and health insurance characteristics, are important explanatory variables of enterprises' decisions to provide EAPs.

  14. Characteristics of physical activity programs in the Brazilian primary health care system

    Directory of Open Access Journals (Sweden)

    Grace Angélica de Oliveira Gomes

    2014-10-01

    Full Text Available The aim of this study was to describe the characteristics of programs that promote physical activity in the public primary care system by region of Brazil, subject to the presence or absence of multidisciplinary primary care teams (NASF. We conducted a cross sectional and population-based telephone survey of the health unit coordinators from 1,251 health care units. Coordinators were asked about the presence and characteristics of physical activity programs. Four out of ten health units reported having a physical activity intervention program, the most common involving walking groups. Most of the activities were performed in the morning, once or twice a week, and in sessions of 30 minutes or more. Physical education professionals were primarily responsible for directing the activities. Interventions occurred in the health unit itself or in adjacent community spaces. In general, these characteristics were similar between units with or without NASF, but varied substantially across regions. These findings will guide future physical activity policies and programs within primary care in Brazil.

  15. Measurement of transient hydrodynamic characteristics of the reactor RA primary cooling system

    International Nuclear Information System (INIS)

    Jovic, L.; Majstorovic, D.; Zeljkovic, I.

    1987-01-01

    Experimental study of transient hydrodynamic characteristics of the research nuclear reactor RA by simultaneous measurements of fluid flow and pressure on several locations of the RA primary coolant system is done. Loss of electric power transient on the main circulation pumps is simulated. measurement methodology, data processing and results of measured data analysis are given. (author)

  16. Characteristics of long-period swells measured in the near shore regions of eastern Arabian Sea

    Digital Repository Service at National Institute of Oceanography (India)

    Johnson, G.; SanilKumar, V.; Amrutha, M.M.; Singh, J.

    Measured wave data covering two years simultaneously at 3 locations along the eastern Arabian Sea reveals the presence of long-period (peak wave period > 18 s) low-amplitude waves (significant wave height < 1 m) and the characteristics...

  17. Effectiveness of Human Research Protection Program Performance Measurements.

    Science.gov (United States)

    Tsan, Min-Fu; Nguyen, Yen

    2017-10-01

    We analyzed human research protection program performance metric data of all Department of Veterans Affairs research facilities obtained from 2010 to 2016. Among a total of 25 performance metrics, 21 (84%) showed improvement, four (16%) remained unchanged, and none deteriorated during the study period. The overall improvement from these 21 performance metrics was 81.1% ± 18.7% (mean ± SD), with a range of 30% to 100%. The four performance metrics that did not show improvement all had initial noncompliance/incidence rates of performance metrics that showed improvement ranged from 0.05% to 60%. However, of the 21 performance metrics that showed improvement, 10 had initial noncompliance/incidence rates of performance measurement is an effective tool in improving the performance of human research protection programs.

  18. Measuring quality of delivery in a substance use prevention program.

    Science.gov (United States)

    Giles, Steven; Jackson-Newsom, Julia; Pankratz, Melinda M; Hansen, William B; Ringwalt, Christopher L; Dusenbury, Linda

    2008-11-01

    The purpose of this study was to develop and validate an observation measure designed to capture teachers' use of interactive teaching skills within the delivery of the All Stars substance use prevention program. Coders counted the number of times teachers praised and encouraged students, accepted and used students' ideas, asked questions, self-disclosed personal anecdotes, and corrected student misbehavior. These teacher behaviors loaded on three factors: classroom management, acknowledgment, and student-centered methods. Classroom management was negatively related to student engagement. Acknowledgment was negatively related to students' normative beliefs. Student-centered methods were positively related to student idealism and normative beliefs, and marginally predicted decreases in student marijuana use. Editors' Strategic Implications: The authors provide a promising approach to studying pedagogical prevention approaches, and they also link teaching processes to student outcomes. This study of program delivery should be of general interest (i.e., not limited to substance use prevention) to practitioners and researchers.

  19. The design of laser atmosphere transmission characteristic measurement system based on virtual instrument

    Science.gov (United States)

    Zhang, Laixian; Sun, Huayan; Xu, Jiawen

    2010-10-01

    The laser atmosphere transmission characteristic affects the use of laser in engineering greatly. This paper designed a laser atmosphere transmission characteristic measurement system based on LabVIEW software, a product of NI. The system acquires laser spacial distribution by means of controlling NI image acquisition card and CCD through PCI, controls oscillograph to acquire laser time domain distribution through Ethernet and controls power meter to acquire energy of laser through RS-232. It processes the data acquired and analyses the laser atmosphere transmission characteristic using Matlab, which is powerful in data processing, through software interface. It provided a new way to study the laser atmosphere transmission characteristic.

  20. [Survey of methicillin-resistant Staphylococcus aureus control measures in hospitals participating in the VINCat program].

    Science.gov (United States)

    Sopena-Galindo, Nieves; Hornero-Lopez, Anna; Freixas-Sala, Núria; Bella-Cueto, Feliu; Pérez-Jové, Josefa; Limon-Cáceres, Enric; Gudiol-Munté, Francesc

    2016-01-01

    VINCat is a nosocomial infection surveillance program in hospitals in Catalonia. The aim of the study was to determine the surveillance and control measures of methicillin-resistant Staphylococcus aureus (MRSA) in these centres. An e-mail survey was carried out from January to March 2013 with questions related to the characteristics of the hospitals and their control measures for MRSA. A response was received from 53 hospitals (>500 beds: 7; 200-500 beds: 14;prevent MRSA in hospitals participating in the VINCat program. Most of the centres have an MRSA protocol, however compliance with it should be improved, especially in areas such as active detection on admission in patients at risk, hand hygiene adherence, cleaning frequency and optimising the use of antibiotics. Copyright © 2015 Elsevier España, S.L.U. and Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

  1. Measurement and evaluation of national family planning programs.

    Science.gov (United States)

    Mauldin, W P

    1967-03-01

    ) segura de traducir las estadísticas de servicio en práticas y tal vez aún datos sobre suministro comercial en datos sabre tasas de natalidad. Esto incluye, par ejemplo, los esfuerzos para consolidar observaciones coma "cinco años-mujer de usa de IUD, a 400 condones equivalen a la prevención de un nacimiento," y esfuerzos como los de Pakistán de calcular tasas coma "años de protección de una pareja contra el embarazo."In the belief that a decrease in the rate of population growth will increase economic development, more than ten countries have inaugurated family planning programs in the past fifteen years. To provide a model for measuring the immediate, intermediate, and long-term effects of any such program, the authors use the Taiwan evaluation.The model suggests that a good system of evaluation should include monthly statistics on (1) participants, who are grouped by characteristics; (2) the distribution of supplies, reported at first by the characteristics of recipients, but after by gross volume only; (3) family planning activities of private physicians to measure the catalytic effect on the private sector; (4) new contacts and amount of advertising in mass media; (5) costs broken down by areas and by cost categories; and (6) distribution of commercial supplies. In addition, the program should conduct 300-400 interviews every 6-12 months to learn the rates of continuation and the rates and reasons for discontinuation. Finally, a KAP survey should be conducted every two years.The administration of the evaluation should be close to the director for policy decisions and for the ultimate work of evaluation-the finding of new ways to measure the main goal of change in fertility by the translation of statistics on Services provided and commercial supplies into birth rate data.

  2. Performance measures in the earth observations commercialization applications program

    Science.gov (United States)

    Macauley, Molly K.

    1996-03-01

    Performance measures in the Earth Observations Commercialization Application Program (EOCAP) are key to its success and include net profitability; enhancements to industry productivity through generic innovations in industry practices, standards, and protocols; and documented contributions to public policy governing the newly developing remote sensing industry. Because EOCAP requires company co-funding, both parties to the agreement (the government and the corporate partner) have incentives to pursue these goals. Further strengthening progress towards these goals are requirements for business plans in the company's EOCAP proposal, detailed scrutiny given these plans during proposal selection, and regularly documented progress reports during project implementation.

  3. Trend Analysis to Measure The Effectiveness of the QA Program

    International Nuclear Information System (INIS)

    Mell, Martin A.

    1989-01-01

    This paper represents an approach to the development and use of a system for the evaluation of available information to recognize and deal with quality trends in the design, engineering, procurement and construction process. Selection, collection, analysis and reporting of data and information will be described. The Trend Analysis System is intended to identify, for line and management personnel, areas where improved compliance, revision of practices or procedures, or other appropriate systematic corrective action is warranted, and provides management with a measure of the overall effectiveness of the quality program

  4. Characteristic of critical and creative thinking of students of mathematics education study program

    Science.gov (United States)

    Rochmad; Agoestanto, A.; Kharis, M.

    2018-03-01

    Critical and creative thinking give important role in learning matematics for mathematics education students. This research to explored the characteristic of critical and creative thinking of students of mathematics study program in mathematics department. Critical thinking and creative thinking can be illustrated as two sides of a coin, which one is associated to the other. In elementary linear algebra courses, however, critical thinking can be seen as a foundation to build students’ creative thinking.

  5. Quality Characteristics of a Graduate Teacher Education Program in Graphic Communications: Results from a Delphi Research Study.

    Science.gov (United States)

    Clark, Aaron C.; Scales, Alice Y.

    2000-01-01

    Investigates characteristics of a quality program in graphic communications teacher education with involvement of professionals in the field. Uses the Delphi technique to achieve consensus on the characteristics that they felt compromised a good educational program for future graphics teachers. (Contains 27 references.) (Author/YDS)

  6. Automated measurement of bolometer line of sight alignment and characteristics for application in ITER

    Energy Technology Data Exchange (ETDEWEB)

    Penzel, Florian Olivier

    2015-07-01

    The line of sight (LOS) alignment and characteristic of a bolometer camera used in a fusion experiment is a crucial parameter for the measurement accuracy of the diagnostic. A robot based LOS measurement device has been developed which allows the fully automatic measurement of the two dimensional transmission function of a bolometer camera. It has been used to optimize camera prototypes for ITER and has been successfully operated in the fusion experiment ASDEX Upgrade in order to measure the LOS alignment.

  7. Advancing nursing leadership: a model for program implementation and measurement.

    Science.gov (United States)

    Omoike, Osei; Stratton, Karen M; Brooks, Beth A; Ohlson, Susan; Storfjell, Judy Lloyd

    2011-01-01

    Despite the abundant literature documenting the need for nurse management education and career development, only recently have professional standards been targeted for this group. Competency standards for nurse leaders repeatedly identify systems-level concepts including finance and budget, communication skills, strategic management, human resources management, change management, and computer technology skills. However, educational initiatives to meet these standards are still at the early stages and most nurse leaders continue to acquire knowledge and experience through "on-the-job" training. This article will illustrate the need for partnerships and collaboration between academia and hospitals to advance nursing leadership to the next century. In addition, a tool to measure the impact of a graduate certificate program in nursing administration on nurse leader competencies is presented. Overall, the certificate program has been successful in multiple ways; it has "graduated" almost 80 nurse leaders, improved participant competence in their role at the systems level, as well as providing an impetus for completion of a graduate degree post program.

  8. Large scale intender test program to measure sub gouge displacements

    Energy Technology Data Exchange (ETDEWEB)

    Been, Ken; Lopez, Juan [Golder Associates Inc, Houston, TX (United States); Sancio, Rodolfo [MMI Engineering Inc., Houston, TX (United States)

    2011-07-01

    The production of submarine pipelines in an offshore environment covered with ice is very challenging. Several precautions must be taken such as burying the pipelines to protect them from ice movement caused by gouging. The estimation of the subgouge displacements is a key factor in pipeline design for ice gouged environments. This paper investigated a method to measure subgouge displacements. An experimental program was implemented in an open field to produce large scale idealized gouges on engineered soil beds (sand and clay). The horizontal force required to produce the gouge, the subgouge displacements in the soil and the strain imposed by these displacements were monitored on a buried model pipeline. The results showed that for a given keel, the gouge depth was inversely proportional to undrained shear strength in clay. The subgouge displacements measured did not show a relationship with the gouge depth, width or soil density in sand and clay tests.

  9. An Imaging System for Automated Characteristic Length Measurement of Debrisat Fragments

    Science.gov (United States)

    Moraguez, Mathew; Patankar, Kunal; Fitz-Coy, Norman; Liou, J.-C.; Sorge, Marlon; Cowardin, Heather; Opiela, John; Krisko, Paula H.

    2015-01-01

    The debris fragments generated by DebriSat's hypervelocity impact test are currently being processed and characterized through an effort of NASA and USAF. The debris characteristics will be used to update satellite breakup models. In particular, the physical dimensions of the debris fragments must be measured to provide characteristic lengths for use in these models. Calipers and commercial 3D scanners were considered as measurement options, but an automated imaging system was ultimately developed to measure debris fragments. By automating the entire process, the measurement results are made repeatable and the human factor associated with calipers and 3D scanning is eliminated. Unlike using calipers to measure, the imaging system obtains non-contact measurements to avoid damaging delicate fragments. Furthermore, this fully automated measurement system minimizes fragment handling, which reduces the potential for fragment damage during the characterization process. In addition, the imaging system reduces the time required to determine the characteristic length of the debris fragment. In this way, the imaging system can measure the tens of thousands of DebriSat fragments at a rate of about six minutes per fragment, compared to hours per fragment in NASA's current 3D scanning measurement approach. The imaging system utilizes a space carving algorithm to generate a 3D point cloud of the article being measured and a custom developed algorithm then extracts the characteristic length from the point cloud. This paper describes the measurement process, results, challenges, and future work of the imaging system used for automated characteristic length measurement of DebriSat fragments.

  10. Participant characteristics associated with greater reductions in waist circumference during a four-month, pedometer-based, workplace health program.

    Science.gov (United States)

    Freak-Poli, Rosanne L A; Wolfe, Rory; Walls, Helen; Backholer, Kathryn; Peeters, Anna

    2011-10-25

    Workplace health programs have demonstrated improvements in a number of risk factors for chronic disease. However, there has been little investigation of participant characteristics that may be associated with change in risk factors during such programs. The aim of this paper is to identify participant characteristics associated with improved waist circumference (WC) following participation in a four-month, pedometer-based, physical activity, workplace health program. 762 adults employed in primarily sedentary occupations and voluntarily enrolled in a four-month workplace program aimed at increasing physical activity were recruited from ten Australian worksites in 2008. Seventy-nine percent returned at the end of the health program. Data included demographic, behavioural, anthropometric and biomedical measurements. WC change (before versus after) was assessed by multivariable linear and logistic regression analyses. Seven groupings of potential associated variables from baseline were sequentially added to build progressively larger regression models. Greater improvement in WC during the program was associated with having completed tertiary education, consuming two or less standard alcoholic beverages in one occasion in the twelve months prior to baseline, undertaking less baseline weekend sitting time and lower baseline total cholesterol. A greater WC at baseline was strongly associated with a greater improvement in WC. A sub-analysis in participants with a 'high-risk' baseline WC revealed that younger age, enrolling for reasons other than appearance, undertaking less weekend sitting time at baseline, eating two or more pieces of fruit per day at baseline, higher baseline physical functioning and lower baseline body mass index were associated with greater odds of moving to 'low risk' WC at the end of the program. While employees with 'high-risk' WC at baseline experienced the greatest improvements in WC, the other variables associated with greater WC improvement

  11. Participant characteristics associated with greater reductions in waist circumference during a four-month, pedometer-based, workplace health program

    Directory of Open Access Journals (Sweden)

    Freak-Poli Rosanne LA

    2011-10-01

    Full Text Available Abstract Background Workplace health programs have demonstrated improvements in a number of risk factors for chronic disease. However, there has been little investigation of participant characteristics that may be associated with change in risk factors during such programs. The aim of this paper is to identify participant characteristics associated with improved waist circumference (WC following participation in a four-month, pedometer-based, physical activity, workplace health program. Methods 762 adults employed in primarily sedentary occupations and voluntarily enrolled in a four-month workplace program aimed at increasing physical activity were recruited from ten Australian worksites in 2008. Seventy-nine percent returned at the end of the health program. Data included demographic, behavioural, anthropometric and biomedical measurements. WC change (before versus after was assessed by multivariable linear and logistic regression analyses. Seven groupings of potential associated variables from baseline were sequentially added to build progressively larger regression models. Results Greater improvement in WC during the program was associated with having completed tertiary education, consuming two or less standard alcoholic beverages in one occasion in the twelve months prior to baseline, undertaking less baseline weekend sitting time and lower baseline total cholesterol. A greater WC at baseline was strongly associated with a greater improvement in WC. A sub-analysis in participants with a 'high-risk' baseline WC revealed that younger age, enrolling for reasons other than appearance, undertaking less weekend sitting time at baseline, eating two or more pieces of fruit per day at baseline, higher baseline physical functioning and lower baseline body mass index were associated with greater odds of moving to 'low risk' WC at the end of the program. Conclusions While employees with 'high-risk' WC at baseline experienced the greatest improvements in

  12. Predictors of doctoral student success in professional psychology: characteristics of students, programs, and universities.

    Science.gov (United States)

    Graham, James M; Kim, Yang-Hyang

    2011-04-01

    In the face of the rising number of doctoral recipients in professional psychology, many have voiced concerns about the quality of nontraditional training programs. Past research suggests that, on a variety of outcomes, graduates from clinical PhD programs outperform graduates from clinical PsyD and, to a lesser extent, counseling PhD programs. We examine an aggregate archival dataset to determine whether student or university characteristics account for the differences in outcomes among programs. The data show meaningful differences in the outcomes of clinical PhD, PsyD, and counseling PhD programs. Furthermore, graduates from research-intensive universities perform better on the psychology licensure exam and are more likely to become American Board of Professional Psychology diplomates. The available data support the notion that the ability to conduct research is an essential component of graduate education. In this light, PsyD programs represent a unique opportunity to train students in the types of evaluation and outcomes assessments used by practicing psychologists. We discuss implications for graduate-level training in professional psychology. © 2011 Wiley Periodicals, Inc.

  13. The possible direct use of satellite radiance measurements by the Atmospheric Radiation Measurement Program

    International Nuclear Information System (INIS)

    1993-03-01

    The Atmospheric Radiation Measurement (ARM) Program is a major research program initiated by the Department of Energy to improve our understanding of radiative and cloud processes critical to predicting the Earth's climate and its changes. Central to this concept is the use of four to six intensively instrumented sites for long-term study and characterization of the processes of interest. The instrumentation suites will include ground-based, high-accuracy radiometers for measuring the short and longwave surface flux, as well as an extensive set of ground-and air-based instrumentation for characterizing the intervening atmospheric column. Satellite-based measurements are expected to play a very important role in providing top-of-the-atmosphere measurements. In this study, we examine the possibility of comparing ARM outputs directly with satellite measurements, thereby ensuring the independence of these two important data sets. Thus we focused on what do satellites really measure and how well do they measure it. On what can we do about the general lack of adequate visible channel calibration. On what is the best way for ARM to obtain near-real-time access to this unprocessed data. And on what is the optimum way for ARM to make use of satellite data

  14. Testing Measurement Invariance of the Students' Affective Characteristics Model across Gender Sub-Groups

    Science.gov (United States)

    Demir, Ergül

    2017-01-01

    In this study, the aim was to construct a significant structural measurement model comparing students' affective characteristics with their mathematic achievement. According to this model, the aim was to test the measurement invariances between gender sub-groups hierarchically. This study was conducted as basic and descriptive research. Secondary…

  15. Characteristics and correlation of various radiation measuring methods in spatial radiation measurement

    International Nuclear Information System (INIS)

    Yoneda, Kazuhiro; Tonouchi, Shigemasa

    1992-01-01

    When the survey of the state of natural radiation distribution was carried out, for the purpose of examining the useful measuring method, the comparison of the γ-ray dose rate calculated from survey meter method, in-situ measuring method and the measuring method by sampling soil was carried out. Between the in-situ measuring method and the survey meter method, the correlation Y=0.986X+5.73, r=0.903, n=18, P<0.01 was obtained, and the high correlation having the inclination of nearly 1 was shown. Between the survey meter method and the measuring method by sampling soil, the correlation Y=1.297X-10.30, r=0.966, n=20 P<0.01 was obtained, and the high correlation was shown, but as for the dose rate contribution, the disparities of 36% in U series, 6% in Th series and 20% in K-40 were observed. For the survey of the state of natural radiation distribution, the method of using in combination the survey meter method and the in-situ measuring method or the measuring method by sampling soil is suitable. (author)

  16. Atmospheric Radiation Measurement Program facilities newsletter, January 2001.; TOPICAL

    International Nuclear Information System (INIS)

    Holdridge, D. J.

    2001-01-01

    In the realm of global climate modeling, numerous variables affect the state of the atmosphere and climate. One important area is soil moisture and temperature. The ARM Program uses several types of instruments to gather soil moisture information. An example is the soil water and temperature system (SWATS). A SWATS is located at each of 21 extended facility sites within the CART site boundary. Each system is configured to measure soil moisture and temperature at eight distinct subsurface levels. A special set of probes used in the SWATS measures soil temperature, soil-water potential, and volumetric water content. Sensors are placed at eight different depths below the soil surface, starting at approximately 5 cm (2 in.) below the surface and ending as deep as 175 cm (69 in.). Each site has two identical sets of probes buried 1 m (3.3 ft) apart, to yield duplicate measurements as a quality control measure. At some sites, impenetrable soil or rock layers prevented installation of probes at the deeper levels. The sensors are connected to an electronic data logger that collects and stores the data. Communication equipment transfers data from the site. All of the electronic equipment is housed in a weatherproof enclosure mounted on a concrete slab

  17. THE MEASUREMENT BASES AND THE ANALYSIS OFTHOSE FOR QUALITATIVE CHARACTERISTICS OF FINANCIAL STATEMENTS

    OpenAIRE

    Hikmet Ulusan

    2008-01-01

    The measurement bases of assets and liabilities for financial reporting are basically included: historical cost, replacement cost, net realizable value, value in use, deprival value and fair value. The first part of this study deals with the measurement bases of assets and liabilities for financial reporting. In the second part, the measurement bases for the qualitative characteristics that determine the usefulness of information provided in financial statements areanalyzed.

  18. Monitoring system for accuracy and reliability characteristics of standard temperature measurements in WWER-440 reactors

    International Nuclear Information System (INIS)

    Stanc, S.; Repa, M.

    2001-01-01

    Description of a monitoring system for accuracy and reliability characteristics of standard temperature measurements in WWER-440 reactors and benefits obtained from its use are shown in the presentation. As standard reactor temperature measurement, coolant temperature measurement at fuel assembly outlets and in loops, entered into the In-Reactor Control System , are considered. Such systems have been implemented at two V-230 reactors and are under implementation at other four V-213 reactors. (Authors)

  19. Characteristics and effects of suicide prevention programs: comparison between workplace and other settings.

    Science.gov (United States)

    Takada, Misato; Shima, Satoru

    2010-01-01

    The present study reviews the literature on suicide prevention programs conducted in the workplace and other settings, namely school, the community, medical facilities, jail, and the army, by conducting an electronic literature search of all articles published between 1967 and November 2007. From a total of 256 articles identified, various contents of suicide prevention programs were determined, and in 34 studies, the effect of programs was evaluated. A review of the literature reveals that the common contents of suicide prevention programs in the workplace and other settings are education and training of individuals, development of a support network, cooperation from internal and external resources, as well as education and training of managers and staff. Although the characteristic contents of suicide prevention programs at the workplace aimed at improving personnel management and health care, screening and care for high-risk individuals, as well as improvement of building structures, were not described. Although a reduction in undesirable attitudes and an increase in mental health knowledge and coping skills in the workplace are in agreement with findings in other settings, suicide rate, suicide-associated behavior, and depression, which were assessed in other settings, were not evaluated in the three studies targeting the workplace.

  20. Aiding troubled employees: the prevalence, cost, and characteristics of employee assistance programs in the United States.

    Science.gov (United States)

    Hartwell, T D; Steele, P; French, M T; Potter, F J; Rodman, N F; Zarkin, G A

    1996-06-01

    Employee assistance programs (EAPs) are job-based programs designed to identify and assist troubled employees. This study determines the prevalence, cost, and characteristics of these programs in the United States by worksite size, industry, and census region. A stratified national probability sample of more than 6400 private, nonagricultural US worksites with 50 or more full-time employees was contacted with a computer-assisted telephone interviewing protocol. More than 3200 worksites responded and were eligible, with a response rate of 90%. Approximately 33% of all private, nonagricultural worksites with 50 or more full-time employees currently offer EAP services to their employees, an 8.9% increase over 1985. These programs are more likely to be found in larger worksites and in the communications/utilities/transportation industries. The most popular model is an external provider, and the median annual cost per eligible employee for internal and external programs was $21.83 and $18.09, respectively. EAPs are becoming a more prevalent point of access to health care for workers with personal problems such as substance abuse, family problems, or emotional distress.

  1. The Impact of Prematriculation Admission Characteristics on Graduation Rates in an Accelerated Doctor of Pharmacy Program.

    Science.gov (United States)

    Steinberg, Michael; Morin, Anna K

    2015-10-25

    Objective. To evaluate the impact of admission characteristics on graduation in an accelerated doctor of pharmacy (PharmD) program. Methods. Selected prematriculation characteristics of students entering the graduation class years of 2009-2012 on the Worcester and Manchester campuses of MCPHS University were analyzed and compared for on-time graduation. Results. Eighty-two percent of evaluated students (699 of 852) graduated on time. Students who were most likely to graduate on-time attended a 4-year school, previously earned a bachelor's degree, had an overall prematriculation grade point average (GPA) greater than or equal to 3.6, and graduated in the spring just prior to matriculating to the university. Factors that reduced the likelihood of graduating on time were also identified. Work experience had a marginal impact on graduating on time. Conclusion. Although there is no certainty in college admission decisions, prematriculation characteristics can help predict the likelihood for academic success of students in an accelerated PharmD program.

  2. Sustainable Environmental Education: Conditions and Characteristics Needed for a Successfully Integrated Program in Public Elementary Schools

    Science.gov (United States)

    Rieckenberg, Cara Rae

    This case study investigated what conditions and characteristics contributed to a successful environmental education program within elementary schools of a school district where environmental education was the mandate. While research does exist on practical application of environmental education within schools, little if any literature has been written or research conducted on schools actually implementing environmental education to study what contributes to the successful implementation of the program. To study this issue, 24 participants from a Midwestern school district were interviewed, six of whom were principals of each of the six elementary schools included in the study. All participants were identified as champions of environmental education integration within their buildings due to leadership positions held focused on environmental education. Analysis of the data collected via interviews revealed findings that hindered the implementation of environmental education, findings that facilitated the implementation of environmental education, and findings that indicated an environmental education-focused culture existed within the schools. Conditions and characteristics found to contribute to the success of these school's environmental education programs include: professional development opportunities, administrative support, peer leadership opportunities and guidance, passion with the content and for the environment, comfort and confidence with the content, ease of activities and events that contribute to the culture and student success. Keywords: environmental education, integration, leadership, teachers as leaders.

  3. Penempatan Optimal Phasor Measurement Unit (PMU dengan Integer Programming

    Directory of Open Access Journals (Sweden)

    Yunan Helmy Amrulloh

    2013-09-01

    Full Text Available Phasor Measurement Unit (PMU merupakan peralatan yang mampu memberikan pengukuran fasor tegangan dan arus secara real-time. PMU dapat digunakan untuk monitoring, proteksi dan kontrol pada sistem tenaga listrik. Tugas akhir ini membahas penempatan PMU secara optimal berdasarkan topologi jaringan sehingga sistem tenaga listrik  dapat diobservasi. Penempatan optimal PMU dirumuskan sebagai masalah Binary Integer Programming (BIP yang akan memberikan variabel dengan pilihan nilai (0,1 yang menunjukkan tempat yang harus dipasang PMU. Dalam tugas akhir ini, BIP diterapkan untuk menyelesaikan masalah penempatan PMU secara optimal pada sistem tenaga listrik  Jawa-Bali 500 KV yang selanjutnya diterapkan dengan penambahan konsep incomplete observability. Hasil simulasi menunjukkan bahwa penerapan BIP pada sistem dengan incomplete observability memberikan jumlah PMU yang lebih sedikit dibandingkan dengan sistem tanpa konsep incomplete observability.

  4. Compensating for evanescent modes and estimating characteristic impedance in waveguide acoustic impedance measurements

    DEFF Research Database (Denmark)

    Nørgaard, Kren Rahbek; Fernandez Grande, Efren

    2017-01-01

    The ear-canal acoustic impedance and reflectance are useful for assessing conductive hearing disorders and calibrating stimulus levels in situ. However, such probe-based measurements are affected by errors due to the presence of evanescent modes and incorrect estimates or assumptions regarding...... characteristic impedance. This paper proposes a method to compensate for evanescent modes in measurements of acoustic impedance, reflectance, and sound pressure in waveguides, as well as estimating the characteristic impedance immediately in front of the probe. This is achieved by adjusting the characteristic...... impedance and subtracting an acoustic inertance from the measured impedance such that the non-causality in the reflectance is minimized in the frequency domain using the Hilbert transform. The method is thus capable of estimating plane-wave quantities of the sought-for parameters by supplying only...

  5. Dynamic Calibration and Verification Device of Measurement System for Dynamic Characteristic Coefficients of Sliding Bearing

    Science.gov (United States)

    Chen, Runlin; Wei, Yangyang; Shi, Zhaoyang; Yuan, Xiaoyang

    2016-01-01

    The identification accuracy of dynamic characteristics coefficients is difficult to guarantee because of the errors of the measurement system itself. A novel dynamic calibration method of measurement system for dynamic characteristics coefficients is proposed in this paper to eliminate the errors of the measurement system itself. Compared with the calibration method of suspension quality, this novel calibration method is different because the verification device is a spring-mass system, which can simulate the dynamic characteristics of sliding bearing. The verification device is built, and the calibration experiment is implemented in a wide frequency range, in which the bearing stiffness is simulated by the disc springs. The experimental results show that the amplitude errors of this measurement system are small in the frequency range of 10 Hz–100 Hz, and the phase errors increase along with the increasing of frequency. It is preliminarily verified by the simulated experiment of dynamic characteristics coefficients identification in the frequency range of 10 Hz–30 Hz that the calibration data in this frequency range can support the dynamic characteristics test of sliding bearing in this frequency range well. The bearing experiments in greater frequency ranges need higher manufacturing and installation precision of calibration device. Besides, the processes of calibration experiments should be improved. PMID:27483283

  6. Measurements of electrophysical characteristics of semiconductor structures with the use of microwave photonic crystals

    Energy Technology Data Exchange (ETDEWEB)

    Usanov, D. A., E-mail: UsanovDA@info.sgu.ru [Chernyshevsky National Research State University (Russian Federation); Nikitov, S. A. [Russian Academy of Sciences, Kotelnikov Institute of Radio Engineering and Electronics (Russian Federation); Skripal, A. V.; Ponomarev, D. V.; Latysheva, E. V. [Chernyshevsky National Research State University (Russian Federation)

    2016-12-15

    A method is proposed for the measurement of the electrophysical characteristics of semiconductor structures: the electrical conductivity of the n layer, which plays the role of substrate for a semiconductor structure, and the thickness and electrical conductivity of the strongly doped epitaxial n{sup +} layer. The method is based on the use of a one-dimensional microwave photonic crystal with a violation of periodicity containing the semiconductor structure under investigation. The characteristics of epitaxial gallium-arsenide structures consisting of an epitaxial layer and the semi-insulating substrate measured by this method are presented.

  7. Assessing the health, functional characteristics, and health needs of youth attending a noncategorical transition support program.

    Science.gov (United States)

    Woodward, Jason F; Swigonski, Nancy L; Ciccarelli, Mary R

    2012-09-01

    To assess the health, functional characteristics, and health care service needs of youth and young adults with special health care needs attending a comprehensive, noncategorical transition program. A self-administered survey was developed from national health surveys and clinical experience to assess concepts identified as important for successful transition to adulthood. Surveys were mailed to 198 parents of youth and young adults with special health care needs attending the transition clinic. Parents were asked about the youth's health, functional status, and health care services needed. The clinical database provided demographic and patient health characteristics. Results were compared against the 2005-2006 National Survey of Children with Special Health Care Needs. Forty-four percent of surveys were returned. Average age of youth was 17.5 (11-22) years old and diagnoses included cerebral palsy (36%), spina bifida (10%), developmental delay or Down syndrome (17%), and autism (6%). Most youth needed assistance with personal care (69%) and routine needs (91%) and used assistive devices (59%). Compared with the 2005-2006 National Survey of Children with Special Health Care Needs, parents reported higher needs for all services except mental health care and tobacco or substance use counseling. Forty three percent reported at least one unmet health need. Few parents reported the need for counseling on substance use (1%), sexual health screening (16%), nutrition (34%), and exercise (41%). Youth attending our transition program had more functional limitations, poorer reported health status, different diagnosis distribution, and higher levels of needed health services. Few parents identified needs for other recommended adolescent preventive services. Transition programs should assess patient health characteristics and service needs to design effective patient-centered services. Copyright © 2012 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All

  8. Neighborhood characteristics and lifestyle intervention outcomes: Results from the Special Diabetes Program for Indians.

    Science.gov (United States)

    Jiang, Luohua; Chang, Jenny; Beals, Janette; Bullock, Ann; Manson, Spero M

    2018-06-01

    Growing evidence reveals various neighborhood conditions are associated with the risk of developing type 2 diabetes. It is unknown, however, whether the effectiveness of diabetes prevention interventions is also influenced by neighborhood characteristics. The purpose of the current study is to examine the impact of neighborhood characteristics on the outcomes of a lifestyle intervention to prevent diabetes in American Indians and Alaska Natives (AI/ANs). Year 2000 US Census Tract data were linked with those from the Special Diabetes Program for Indians Diabetes Prevention Program (SDPI-DP), an evidence-based lifestyle intervention implemented in 36 AI/AN grantee sites across the US. A total of 3394 participants started the intervention between 01/01/2006 and 07/31/2009 and were followed by 07/31/2016. In 2016-2017, data analyses were conducted to evaluate the relationships of neighborhood characteristics with intervention outcomes, controlling for individual level socioeconomic status. AI/ANs from sites located in neighborhoods with higher median household income had 38% lower risk of developing diabetes than those from sites with lower neighborhood income (adjusted hazard ratio = 0.65, 95% CI: 0.47-0.90). Further, those from sites with higher neighborhood concentrations of AI/ANs achieved less BMI reduction and physical activity increase. Meanwhile, participants from sites with higher neighborhood level of vehicle occupancy made more improvement in BMI and diet. Lifestyle intervention effectiveness was not optimal when the intervention was implemented at sites with disadvantaged neighborhood characteristics. Meaningful improvements in socioeconomic and other neighborhood disadvantages of vulnerable populations could be important in stemming the global epidemic of diabetes. Copyright © 2018 Elsevier Inc. All rights reserved.

  9. A measurement system for large, complex software programs

    Science.gov (United States)

    Rone, Kyle Y.; Olson, Kitty M.; Davis, Nathan E.

    1994-01-01

    This paper describes measurement systems required to forecast, measure, and control activities for large, complex software development and support programs. Initial software cost and quality analysis provides the foundation for meaningful management decisions as a project evolves. In modeling the cost and quality of software systems, the relationship between the functionality, quality, cost, and schedule of the product must be considered. This explicit relationship is dictated by the criticality of the software being developed. This balance between cost and quality is a viable software engineering trade-off throughout the life cycle. Therefore, the ability to accurately estimate the cost and quality of software systems is essential to providing reliable software on time and within budget. Software cost models relate the product error rate to the percent of the project labor that is required for independent verification and validation. The criticality of the software determines which cost model is used to estimate the labor required to develop the software. Software quality models yield an expected error discovery rate based on the software size, criticality, software development environment, and the level of competence of the project and developers with respect to the processes being employed.

  10. CHARACTERISTICS OF GRADUATE ACCOUNTING PROGRAMS: AN ANALYSIS OF UNIVERSITIES IN ENGLISH-SPEAKING COUNTRIES

    Directory of Open Access Journals (Sweden)

    Sandra Rolim Ensslin

    2012-09-01

    Full Text Available The literature indicates there is a shortage of professors of accounting. For some researchers this lack is related to the high price paid to obtain an advanced degree in this area. According to the American Accounting Association (AAA, graduate programs need to be more attractive, less stressful and less expensive for students. Therefore, the objective of this study is to map the characteristics of the selection process, the courses offered and the requirements to obtain a master’s degree in accounting from universities located in English-speaking. This study can be classified as descriptive, with a theoretical-conceptual nature and a qualitative approach. We rely on secondary sources and apply inductive logic. The main results are that in the United States, 71% of the programs require candidates to have knowledge of accounting, finance, economics, taxes, statistics and mathematics; 75% of Australian universities require a minimum score on the TOEFL for foreign students, 20% have a minimum GPA and 10% require taking the GMAT; and no Canadian university requires a letter of recommendation. Regarding the purpose of the courses, 88% of the institutions that offer master programs in accounting focus on improved professional qualification of accountants. In Australia, 30% of the programs last 18 months, while in Canada this figure is 66% and in New Zealand, 50% of the programs last at least two years. With respect to the graduation requirements, 82% of the universities require between 4 and 9 mandatory disciplines. In conclusion, the master programs in the United States and United Kingdom are relatively more demanding with respect to the degree requirements than in the other countries investigated.

  11. A Nationally Scaled Telebehavioral Health Program for Chronic Pain: Characteristics, Goals, and Psychological Outcomes.

    Science.gov (United States)

    Mochari-Greenberger, Heidi; Peters, Aimee; Vue, Lee; Pande, Reena L

    2017-08-01

    Millions of U.S. adults suffer from chronic pain with a high prevalence of comorbid mental health issues. Telehealth-delivered behavioral therapy for chronic pain has been evaluated in the research setting. The purpose of this study was 1) to describe a nationally scaled, standardized, telebehavioral therapy program for patients with chronic pain and behavioral comorbidities, and 2) evaluate characteristics, goals, and psychosocial outcomes among program participants. This was mixed-methods retrospective cohort analysis among consecutive program graduates (mean age 53y; 24% male). The 8-week program was delivered by a licensed therapist and a behavior coach through telephone/secure video and tailored to each participant's behavioral health needs and goals. Participant chief complaints, behavioral goals, and mood triggers were abstracted by deidentified clinical record review using structured qualitative research methods. Depression, anxiety, and stress symptom data were collected at baseline and program graduation using the validated Depression Anxiety Stress Scales 21. Back pain (42%) and hip/leg/knee pain (28%) comprised the most common chief complaints. Pain management (44%) and weight loss (43%) were the most frequently cited goals. At baseline, approximately half of participants had elevated depression (59%), anxiety (54%), and/or stress (48%) scores. Triggers for depressed, anxious, or stressed mood included severe pain (47%), health concerns (46%), and interpersonal relationship challenges (45%). At graduation, significant improvement in median depression (-54%), anxiety (-50%), and stress (-33%) symptom scores was observed among those with non-normal baseline values (p health program for chronic pain experienced significant improvement in depression, anxiety, and stress symptoms and shared several complaints, goals, and mood triggers.

  12. Spreadsheet design and validation for characteristic limits determination in gross alpha and beta measurement

    International Nuclear Information System (INIS)

    Prado, Rodrigo G.P. do; Dalmazio, Ilza

    2013-01-01

    The identification and detection of ionizing radiation are essential requisites of radiation protection. Gross alpha and beta measurements are widely applied as a screening method in radiological characterization, environmental monitoring and industrial applications. As in any other analytical technique, test performance depends on the quality of instrumental measurements and reliability of calculations. Characteristic limits refer to three specific statistics, namely, decision threshold, detection limit and confidence interval, which are fundamental to ensuring the quality of determinations. This work describes a way to calculate characteristic limits for measurements of gross alpha and beta activity applying spreadsheets. The approach used for determination of decision threshold, detection limit and limits of the confidence interval, the mathematical expressions of measurands and uncertainty followed standards guidelines. A succinct overview of this approach and examples are presented and spreadsheets were validated using specific software. Furthermore, these spreadsheets could be used as tool to instruct beginner users of methods for ionizing radiation measurements. (author)

  13. Histological characteristics of the gonads of pig fetuses and their relationship with fetal anatomical measurements.

    Science.gov (United States)

    Pontelo, Thais Preisser; Miranda, José Rafael; Felix, Matheus Augusto Rodrigues; Pereira, Barbara Azevedo; da Silva, William Eduardo; Avelar, Gleide Fernandes; Mariano, Flávia Cristina Martins Queiroz; Guimarães, Gregório Corrêa; Zangeronimo, Márcio Gilberto

    2018-04-01

    The objective was to evaluate the histomorphometric characteristics of the testis and ovaries of pig fetuses at different gestational ages, as well as their correlation with some fetus measurements. Forty-four fetuses were separated for gender (male and female) and gestational age (50, 80 and 106days of gestation). After slaughter, fetuses had their body length, head and thoracic perimeters measured and their gonads submitted to histomorphometric analyses. The gonadal characteristics at different gestational ages were statistically compared, correlations with the fetal measurements were performed and equations to predict the gonadal characteristics from the fetal measurements were obtained. The testis weight logarithmically increased along pregnancy, whereas ovary weight increased in a linear manner. The cordonal length and number of Sertoli cells were positively correlated with the fetal measurements, being higher at 106days gestation, while the nuclear volume of these cells were negatively correlated. The total number of follicles was higher at day 80 and 106 of pregnancy. The number of oogonia decreased along the pregnancy, however, their nucleus size was increased. The number of follicles and volume of oogonia were positively correlated with the fetal measurements, while the number of oogonia was negatively correlated. Equations were obtained for the prediction of gonadal characteristics of fetuses. We concluded that in pigs testis cell proliferation, ovary development and histological organization was more pronounced during the final third of pregnancy. Fetal weight and size were strongly related to gonadal development, and can be used to estimate the histological characteristics of gonads. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Measurement and numerical simulation of a small centrifugal compressor characteristics at small or negative flow rate

    Science.gov (United States)

    Tsukamoto, Kaname; Okada, Mizuki; Inokuchi, Yuzo; Yamasaki, Nobuhiko; Yamagata, Akihiro

    2017-04-01

    For centrifugal compressors used in automotive turbochargers, the extension of the surge margin is demanded because of lower engine speed. In order to estimate the surge line exactly, it is required to acquire the compressor characteristics at small or negative flow rate. In this paper, measurement and numerical simulation of the characteristics at small or negative flow rate are carried out. In the measurement, an experimental facility with a valve immediately downstream of the compressor is used to suppress the surge. In the numerical work, a new boundary condition that specifies mass flow rate at the outlet boundary is used to simulate the characteristics around the zero flow rate region. Furthermore, flow field analyses at small or negative flow rate are performed with the numerical results. The separated and re-circulated flow fields are investigated by visualization to identify the origin of losses.

  15. 7 CFR 1484.72 - How is program effectiveness measured?

    Science.gov (United States)

    2010-01-01

    ... export sales achieved, including the ratio of additional export sales in relation to Cooperator program... findings and recommendations and proposes changes in program strategy or design as a result of the...

  16. Military Personnel: Performance Measures Needed to Determine How Well DOD’s Credentialing Program Helps Servicemembers

    Science.gov (United States)

    2016-10-01

    MILITARY PERSONNEL Performance Measures Needed to Determine How Well DOD’s Credentialing Program Helps Servicemembers...Measures Needed to Determine How Well DOD’s Credentialing Program Helps Servicemembers What GAO Found The Department of Defense (DOD) has taken steps to...establish the statutorily required credentialing program, but it has not developed performance measures to gauge the program’s effectiveness

  17. Performance Characteristics and Prediction of Bodyweight using Linear Body Measurements in Four Strains of Broiler Chicken

    OpenAIRE

    I. Udeh; J.O. Isikwenu and G. Ukughere

    2011-01-01

    The objectives of this study were to compare the performance characteristics of four strains of broiler chicken from 2 to 8 weeks of age and predict body weight of the broilers using linear body measurements. The four strains of broiler chicken used were Anak, Arbor Acre, Ross and Marshall. The parameters recorded were bodyweight, weight gain, total feed intake, feed conversion ratio, mortality and some linear body measurements (body length, body width, breast width, drumstick length, shank l...

  18. Atmospheric radiation measurement program facilities newsletter, September 2001.; TOPICAL

    International Nuclear Information System (INIS)

    Holdridge, D. J.

    2001-01-01

    Our Changing Climate-Is our climate really changing? How do we measure climate change? How can we predict what Earth's climate will be like for generations to come? One focus of the Atmospheric Radiation Measurement (ARM) Program is to improve scientific climate models enough to achieve reliable regional prediction of future climate. According to the Environmental Protection Agency (EPA), the global mean surface temperature has increased by 0.5-1.0 F since the late 19th century. The 20th century's 10 warmest years all occurred in the last 15 years of the century, with 1998 being the warmest year of record. The global mean surface temperature is measured by a network of temperature-sensing instruments distributed around the world, including ships, ocean buoys, and weather stations on land. The data from this network are retrieved and analyzed by various organizations, including the National Aeronautics and Space Administration, the National Oceanic and Atmospheric Administration, and the World Meteorological Organization. Worldwide temperature records date back to 1860. To reconstruct Earth's temperature history before 1860, scientists use limited temperature records, along with proxy indicators such as tree rings, pollen records, and analysis of air frozen in ancient ice. The solar energy received from the sun drives Earth's weather and climate. Some of this energy is reflected and filtered by the atmosphere, but most is absorbed by Earth's surface. The absorbed solar radiation warms the surface and is re-radiated as heat energy into the atmosphere. Some atmospheric gases, called greenhouse gases, trap some of the re-emitted heat, keeping the surface temperature regulated and suitable for sustaining life. Although the greenhouse effect is natural, some evidence indicates that human activities are producing increased levels of some greenhouse gases such as carbon dioxide, methane, and nitrous oxide. Scientists believe that the combustion of fossil fuels is

  19. Multispectral televisional measuring control of the ecological state of waterbodies on the characteristics macrophytes

    Science.gov (United States)

    Petruk, Vasil; Kvaternyuk, Sergii; Kozachuk, Anastasia; Sailarbek, Saltanat; Gromaszek, Konrad

    2015-12-01

    Improved methods for multispectral measuring television monitoring of the ecological state of water bodies on the characteristics of macrophytes groups to assess complex human impact on their environment. Integral assessment of water pollution is based on research products of higher aquatic plants and their communities by optical methods.

  20. Assessing reserve-building pursuits and person characteristics: psychometric validation of the Reserve-Building Measure

    NARCIS (Netherlands)

    Schwartz, Carolyn E.; Michael, Wesley; Zhang, Jie; Rapkin, Bruce D.; Sprangers, Mirjam A. G.

    2018-01-01

    A growing body of research suggests that regularly engaging in stimulating activities across multiple domains-physical, cultural, intellectual, communal, and spiritual-builds resilience. This project investigated the psychometric characteristics of the DeltaQuest Reserve-Building Measure for use in

  1. Atmospheric Radiation Measurement Program Science Plan. Current Status and Future Directions of the ARM Science Program

    Energy Technology Data Exchange (ETDEWEB)

    Ackerman, Thomas P.; Del Genio, Anthony D.; Ellingson, Robert G.; Ferrare, Richard A.; Klein, Steve A.; McFarquhar, Gregory M.; Lamb, Peter J.; Long, Charles M.; Verlinde, Johannes

    2004-10-30

    The Atmospheric Radiation Measurement (ARM) Program has matured into one of the key programs in the U.S. Climate Change Science Program. The ARM Program has achieved considerable scientific success in a broad range of activities, including site and instrument development, atmospheric radiative transfer, aerosol science, determination of cloud properties, cloud modeling, and cloud parameterization testing and development. The focus of ARM science has naturally shifted during the last few years to an increasing emphasis on modeling and parameterization studies to take advantage of the long time series of data now available. During the next 5 years, the principal focus of the ARM science program will be to: Maintain the data record at the fixed ARM sites for at least the next five years; Improve significantly our understanding of and ability to parameterize the 3-D cloud-radiation problem at scales from the local atmospheric column to the global climate model (GCM) grid square; Continue developing techniques to retrieve the properties of all clouds, with a special focus on ice clouds and mixed-phase clouds; Develop a focused research effort on the indirect aerosol problem that spans observations, physical models, and climate model parameterizations; Implement and evaluate an operational methodology to calculate broad-band heating rates in the atmospheric columns at the ARM sites; Develop and implement methodologies to use ARM data more effectively to test atmospheric models, both at the cloud-resolving model scale and the GCM scale; and, Use these methodologies to diagnose cloud parameterization performance and then refine these parameterizations to improve the accuracy of climate model simulations. In addition, the ARM Program is actively developing a new ARM Mobile Facility (AMF) that will be available for short deployments (several months to a year or more) in climatically important regions. The AMF will have much of the same instrumentation as the remote

  2. 76 FR 34385 - Program Integrity: Gainful Employment-Debt Measures

    Science.gov (United States)

    2011-06-13

    ... bachelor's and master's degree programs, and 20 years for programs that lead to a doctoral or first...-risk and underserved populations of students; and limit the growth of, and innovation in, new programs... and to society in general, nor that they would represent a poor financial risk. Sen. Rep. No. 758...

  3. Effects of an off-season conditioning program on the physical characteristics of adolescent rugby union players.

    Science.gov (United States)

    Smart, Daniel J; Gill, Nicholas D

    2013-03-01

    The aims of the study were to determine if a supervised off-season conditioning program enhanced gains in physical characteristics compared with the same program performed in an unsupervised manner and to establish the persistence of the physical changes after a 6-month unsupervised competition period. Forty-four provincial representative adolescent rugby union players (age, mean ± SD, 15.3 ± 1.3 years) participated in a 15-week off-season conditioning program either under supervision from an experienced strength and conditioning coach or unsupervised. Measures of body composition, strength, vertical jump, speed, and anaerobic and aerobic running performance were taken, before, immediately after, and 6 months after the conditioning. Post conditioning program the supervised group had greater improvements in all strength measures than the unsupervised group, with small, moderate and large differences between the groups\\x{2019} changes for chin-ups (9.1%; ± 11.6%), bench-press (16.9%; ± 11.7%) and box-squat (50.4%; ± 20.9%) estimated 1RM respectively. Both groups showed trivial increases in mass; however increases in fat free mass were small and trivial for supervised and unsupervised players respectively. Strength declined in the supervised group while the unsupervised group had small increases during the competition phase, resulting in only a small difference between the long-term changes in box-squat 1RM (15.9%; ± 13.2%). The supervised group had further small increases in fat free mass resulting in a small difference (2.4%; ± 2.7%) in the long-term changes. The postconditioning differences between the 2 groups may have been a result of increased adherence and the attainment of higher training loads during supervised training. The lack of differences in strength after the competition period indicates that supervision should be maintained to reduce substantial decrements in performance.

  4. Cervical Coupling Motion Characteristics in Healthy People Using a Wireless Inertial Measurement Unit

    Directory of Open Access Journals (Sweden)

    Hyunho Kim

    2013-01-01

    Full Text Available Objective. The objectives were to show the feasibility of a wireless microelectromechanical system inertial measurement unit (MEMS-IMU to assess the time-domain characteristics of cervical motion that are clinically useful to evaluate cervical spine movement. Methods. Cervical spine movements were measured in 18 subjects with wireless IMUs. All rotation data are presented in the Euler angle system. Amount of coupling motions was evaluated by calculating the average angle ratio and the maximum angle ratio of the coupling motion to the primary motion. Reliability is presented with intraclass correlation coefficients (ICC. Results. Entire time-domain characteristics of cervical motion were measured with developed MEMS-IMU system. Cervical range of motion (CROM and coupling motion range were measured with high ICCs. The acquired data and calculated parameters had similar tendency with the previous studies. Conclusions. We evaluated cervical motion with economic system using a wireless IMU of high reliability. We could directly measure the three-dimensional cervical motion in degrees in realtime. The characteristics measured by this system may provide a diagnostic basis for structural or functional dysfunction of cervical spine. This system is also useful to demonstrate the effectiveness of any intervention such as conventional medical treatment, and Korean medical treatment, exercise therapy.

  5. Body measurements and carcass characteristics correlation of Nellore young bulls finishidedED IN FEEDLOT

    Directory of Open Access Journals (Sweden)

    Bruna Laurindo Rosa

    2014-10-01

    Full Text Available In this work it was aimed to evaluate Pearson correlations between body measurements, carcass characteristics and production of 35 Nellore bulls, confined for 96 days, with 402±14.90 kg and 18 months old. Weightings, ultrasound images and 14 measurements were obtained at the beginning of each experimental period and before slaughter, totaling four weight ratings of ultrasound images and measurements per animal. For the evaluation of body measurements and ultrasound images with carcass traits the values from the last measurement were considered. The images were made along with weighing animals through a Scanner, and measurements with a tape measure and a zoométrica cane, and these were correlated with each other and with productive and carcass characteristics. For measures of loin eye area evaluated by ultrasonography, it were found positive correlations with body length (0.32, rump (0.36 and thigh (0.20; withers height (0.20 and pelviano contour (0.38 (P<0.05. Variables of hip height and chest, chest width and pin bones, and heart girth showed positive correlations with two or more productive traits of economic interest, such as slaughter weight, hot carcass weight and dressing percentage (P<0.05. Significant correlations were found for most of the variables studied. Linear body measurements such as length and height emerge as a tool that can be useful in the formation of more homogenous lots and to predict the point of slaughter, along with the weight of the animals.

  6. Residency program characteristics that are associated with pass rate of the American Board of Pediatrics certifying exam.

    Science.gov (United States)

    Atsawarungruangkit, Amporn

    2015-01-01

    The US is home to almost 200 pediatrics residency programs; despite this, there is little information about the relationship between program characteristics and performance in the American Board of Pediatrics (ABP) certifying exam. To evaluate the relationship between pass rate of the ABP certifying exam with the characteristics of categorical pediatrics residency programs. This retrospective, cross-sectional study used publicly available data from the ABP website and the Fellowship and Residency Electronic Interactive Database. All programs that reported pass rates were included. The analysis, comprising univariate and multivariate linear regression, involved determining how 69 factors (eg, general information, number of faculty and trainees, work schedule, educational environment) related to the pass rate. Of 199 programs, 194 reported pass rates. The univariate analysis revealed 20 program characteristics with P-values program characteristics: ratio of full-time equivalent paid faculty to positions, percentage of US medical graduates, and average hours per week of regularly scheduled lectures or conferences. Unlike in previous studies, location and program size were not significantly associated with the pass rate in this multivariate analysis. The finding regarding the ratio of full-time equivalent paid faculty to positions highlighted the benefits of a well-supervised training environment, while that regarding the percentage of US medical graduates indicated the necessity of high competition in residency programs. Finally, longer hours per week of regularly scheduled lectures or conferences were associated with better academic outcomes, both statistically and intuitively.

  7. Determinants of success in Shared Savings Programs: An analysis of ACO and market characteristics.

    Science.gov (United States)

    Ouayogodé, Mariétou H; Colla, Carrie H; Lewis, Valerie A

    2017-03-01

    Medicare's Accountable Care Organization (ACO) programs introduced shared savings to traditional Medicare, which allow providers who reduce health care costs for their patients to retain a percentage of the savings they generate. To examine ACO and market factors associated with superior financial performance in Medicare ACO programs. We obtained financial performance data from the Centers for Medicare and Medicaid Services (CMS); we derived market-level characteristics from Medicare claims; and we collected ACO characteristics from the National Survey of ACOs for 215 ACOs. We examined the association between ACO financial performance and ACO provider composition, leadership structure, beneficiary characteristics, risk bearing experience, quality and process improvement capabilities, physician performance management, market competition, CMS-assigned financial benchmark, and ACO contract start date. We examined two outcomes from Medicare ACOs' first performance year: savings per Medicare beneficiary and earning shared savings payments (a dichotomous variable). When modeling the ACO ability to save and earn shared savings payments, we estimated positive regression coefficients for a greater proportion of primary care providers in the ACO, more practicing physicians on the governing board, physician leadership, active engagement in reducing hospital re-admissions, a greater proportion of disabled Medicare beneficiaries assigned to the ACO, financial incentives offered to physicians, a larger financial benchmark, and greater ACO market penetration. No characteristic of organizational structure was significantly associated with both outcomes of savings per beneficiary and likelihood of achieving shared savings. ACO prior experience with risk-bearing contracts was positively correlated with savings and significantly increased the likelihood of receiving shared savings payments. In the first year, performance is quite heterogeneous, yet organizational structure does not

  8. Overview of the aerial radiological measuring system (ARMS) program

    International Nuclear Information System (INIS)

    Deal, L.J.; Doyle, J.F. III.

    1975-01-01

    Since 1960 EG and G, Inc. has developed and maintained for the U.S. Energy Research and Development Administration (ERDA) a state-of-the-art radiation surveillance program called the Aerial Radiological Measuring System (ARMS). Radiological surveys covering more than 300,000 square miles have been performed. In addition to the radiation detector gear, the system includes an inertial navigation system, radar altimeter, meteorological probes, air sampler, air sample analyzer, multispectral cameras, aerial mapping camera and infrared scanner. The recently improved data acquisition system, REDAR, records all inputs digitally on magnetic tape and is readily mounted in fixed-wing aircraft or helicopters. The data analysis system, REDAC, is mounted in a mobile processing laboratory which accompanies the aircraft on surveys. Radiation isopleth maps, both for gross counts and selected isotopes, can be prepared in the field. Special computer software enables the ARMS to detect changes of less than 1.0 μR/hr in exposure rates between successive surveys of a given site

  9. Science Plan for the Atmospheric Radiation Measurement Program (ARM)

    International Nuclear Information System (INIS)

    1996-02-01

    The purpose of this Atmospheric Radiation Measurement (ARM) Science Plan is to articulate the scientific issues driving the ARM Program, and to relate them to DOE's programmatic objectives for ARM, based on the experience and scientific progress gained over the past five years. ARM programmatic objectives are to: (1) Relate observed radiative fluxes and radiances in the atmosphere, spectrally resolved and as a function of position and time, to the temperature and composition of the atmosphere, specifically including water vapor and clouds, and to surface properties, and sample sufficient variety of situations so as to span a wide range of climatologically relevant possibilities; (2) develop and test parameterizations that can be used to accurately predict the radiative properties and to model the radiative interactions involving water vapor and clouds within the atmosphere, with the objective of incorporating these parameterizations into general circulation models. The primary observational methods remote sending and other observations at the surface, particularly remote sensing of clouds, water vapor and aerosols

  10. Measurement of ac electrical characteristics of SSC dipole magnets at Brookhaven

    International Nuclear Information System (INIS)

    Smedley, K.

    1992-04-01

    The SSC collider is designed to have circumference of 87 km. The superconducting magnets along the collider ring are grouped into ten sectors. Each sector, a string of average length of 8.7 km,m is powered by one power source located near the center of the sector. Because of the alternating-current (ac) electrical characteristics of the magnets, the power supply ripple currents and transients form a time and space distribution in the magnet string which affects particle motions. Additionally, since the power supply load is a magnet string, the current regulation loop design is highly dependent upon the ac electrical characteristics of the magnets. A means is needed to accurately determine the ac electrical characteristics of the superconducting magnets. The ac characteristics of magnets will be used to predict the ripple distribution of the long string of superconducting magnets. Magnet ac characteristics can also provide necessary information for the regulation loop design. This paper presents a method for measuring the ac characteristics of superconducting magnets. Two collider dipole magnets, one superconducting and one at room temperature, were tested at Brookhaven National Lab

  11. Six sigma: program characteristics in eleven companies located in the metropolitan region of Porto Alegre

    Directory of Open Access Journals (Sweden)

    Jaqueline Terezinha Martins Correa Rodrigues

    2012-01-01

    Full Text Available Six Sigma combines managerial factors with statistical tools and is deployed in many enterprises today. Rio Grande do Sul is a Brazilian state that has a great industrialization, especially in the metropolitan area of Porto Alegre. Some of these industries have deployed the Six Sigma program. The aim of this paper is to present characteristics of the Six Sigma program in companies located in this region, through an exploratory study. A literature review subsidized the development of the questionnaire. Eleven companies participated of research in July and August 2008. It used statistical tools and qualitative analysis to analyze the results. Most of the companies that participated is classified as large and uses the DMAIC method to implement Six Sigma. The principal cause of program implementation was process improvement. In only one company the Six Sigma is implemented in all sectors, including administrative areas. Another result is the lack of clearly criteria for defining the career of Belts and the discrepancy of academic formation of these specialists.

  12. Examination of Student, Program, and Institutional Support Characteristics That Relate to PGA Golf Management Students' Intent to Persist

    Science.gov (United States)

    Cain, Christopher

    2013-01-01

    The examination of student (entry characteristics, academic performance, career goals, and interaction with peers and faculty), program (programmatic interventions, academic major, and learning communities), and institutional support characteristics (financial aid and residence) that relate to cohort intent to persist are studied among 490 PGA…

  13. Characteristics and measurement of supersonic projectile shock waves by a 32-microphone ring array

    Science.gov (United States)

    Chang, Ho; Wu, Yan-Chyuan; Tsung, Tsing-Tshih

    2011-08-01

    This paper discusses about the characteristics of supersonic projectile shock wave in muzzle region during firing of high explosive anti-tank (HEAT) and high explosive (HE) projectiles. HEAT projectiles are fired horizontally at a muzzle velocity of Mach 3.5 from a medium caliber tank gun equipped with a newly designed multi-perforated muzzle brake, whereas HE projectiles are fired at elevation angles at a muzzle velocity of Mach 2 from a large caliber howitzer equipped with a newly designed double-baffle muzzle brake. In the near field, pressure signatures of the N-wave generated from projectiles are measured by 32-microphone ring array wrapped by cotton sheath. Records measured by the microphone array are used to demonstrate several key characteristics of the shock wave of supersonic projectile. All measurements made in this study can be a significant reference for developing guns, tanks, or the chassis of fighting vehicles.

  14. Investigation on coupling error characteristics in angular rate matching based ship deformation measurement approach

    Science.gov (United States)

    Yang, Shuai; Wu, Wei; Wang, Xingshu; Xu, Zhiguang

    2018-01-01

    The coupling error in the measurement of ship hull deformation can significantly influence the attitude accuracy of the shipborne weapons and equipments. It is therefore important to study the characteristics of the coupling error. In this paper, an comprehensive investigation on the coupling error is reported, which has a potential of deducting the coupling error in the future. Firstly, the causes and characteristics of the coupling error are analyzed theoretically based on the basic theory of measuring ship deformation. Then, simulations are conducted for verifying the correctness of the theoretical analysis. Simulation results show that the cross-correlation between dynamic flexure and ship angular motion leads to the coupling error in measuring ship deformation, and coupling error increases with the correlation value between them. All the simulation results coincide with the theoretical analysis.

  15. Measuring the Dynamic Characteristics of a Low Specific Speed Pump—Turbine Model

    Directory of Open Access Journals (Sweden)

    Eve Cathrin Walseth

    2016-03-01

    Full Text Available This paper presents results from an experiment performed to obtain the dynamic characteristics of a reversible pump-turbine model. The characteristics were measured in an open loop system where the turbine initially was run on low rotational speed before the generator was disconnected allowing the turbine to go towards runaway. The measurements show that the turbine experience damped oscillations in pressure, speed and flow rate around runaway corresponding with presented stability criterion in published literature. Results from the experiment is reproduced by means of transient simulations. A one dimensional analytical turbine model for representation of the pump-turbine is used in the calculations. The simulations show that it is possible to reproduce the physics in the measurement by using a simple analytical model for the pump-turbine as long as the inertia of the water masses in the turbine are modeled correctly.

  16. Method and device for optimizing the measurements of the damping characteristics of therman neutrons

    International Nuclear Information System (INIS)

    Jacobson, L.A.; Johnstone, C.W.

    1978-01-01

    The borehole probe consists of a pulsed neutron generator and two detectors installed at different distances from the generator. The decay or damping characteristics of the thermal neutrons in a ground formation are measured by picking up indications of the concentration of thermal neutrons in the formation during a set of two measuring intervals offer irradiation. These measuring intervals consist of a sequence of discrete time gates. The time gates are subdivided into groups of progressive periods of time. The time delay between the pulses and the beginning of the sequence is adjusted by means of a selected scale factor value. (DG) [de

  17. Characteristics and Outcomes of an Innovative Train-in-Place Residency Program.

    Science.gov (United States)

    Green-McKenzie, Judith; Emmett, Edward A

    2017-10-01

    Physicians who make a midcareer specialty change may find their options for formal training are limited. Here, we describe a train-in-place program, with measureable outcomes, created to train midcareer physicians who desire formal training in occupational medicine. We evaluated educational outcomes from a novel residency program for midcareer physicians seeking formal training and board certification in occupational medicine. Physicians train in place at selected clinical training sites where they practice, and participate in 18 visits to the primary training site over a 2-year period. Program components include competency-based training structured around rotations, mentored projects, and periodic auditing visits to train-in-site locations by program faculty. Main outcome measures are achievement of Accreditation Council for Graduate Medical Education Occupational Medicine Milestones, American College of Occupational and Environmental Medicine competencies, performance on the American College of Preventive Medicine examinations, diversity in selection, placement of graduates, and the number of graduates who remain in the field. Since inception of this program in 1997, there have been 109 graduates who comprise 7.2% of new American Board of Preventive Medicine diplomates over the past decade. Graduates scored competitively on the certifying examination, achieved all milestones, expressed satisfaction with training, and are geographically dispersed, representing every US region. Most practice outside the 25 largest standard metropolitan statistical areas. More than 95% have remained in the field. Training in place is an effective approach to provide midcareer physicians seeking comprehensive skills and board certification in occupational medicine formal training, and may be adaptable to other specialties.

  18. [Design of a program for the positive development of schoolchildren and characteristics of participants (Medellin, Colombia)].

    Science.gov (United States)

    Hernández, Dora María; Duque, Luis Fernando; Restrepo, Alexandra

    2014-01-01

    The design of the program for the promotion of personal potential and prevention of risky health behaviors in school-aged children, PILAS! Better Adults, Better Kids, was based on local and international evidence on programs for the prevention of school-based violence. The program offers a training process for parents and teachers through active methodologies and advice (provided for 10 months) based on topics that encourage individual child development and the delegitimization of violence in everyday interactions. A total of 306 teachers, 800 parents and 12,800 children benefited from the program. An initial measurement was conducted using a scale ranging from 0 to 100 in a sample of 1751 children. The results showed an average of 80 in the children's social skills, but caregivers reported high levels of aggression. Communication and supervision failures were found among parents, as well as punishment practices through psychological and physical aggression. Another finding was low social cohesion in the neighborhood. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

  19. Teacher Incentive Pay Programs in the United States: Union Influence and District Characteristics

    Directory of Open Access Journals (Sweden)

    Guodong Liang

    2015-06-01

    Full Text Available This study examined the characteristics of teacher incentive pay programs in the United States. Using the 2007–08 SASS data set, it found an inverse relationship between union influence and districts’ incentive pay offerings. Large and ethnically diverse districts in urban areas that did not meet the requirements for Adequate Yearly Progress as defined under the No Child Left Behind Act are more likely to offer a larger number of economic incentives. Although rural districts are likely to reward teachers in hard-to-staff schools, they are not more likely to reward teachers who are certified by the National Board or who teach in the subject areas of shortage, nor are they more likely to offer multiple financial incentives.

  20. Design and construction of an instrument for measuring thermistor electrical characteristic

    International Nuclear Information System (INIS)

    Budiono; Yudi Herdiana

    2007-01-01

    In this work an instrument for measuring the electrical characteristic of thermistor has been designed and constructed. The instrument was constructed from main components i.e. a micro controller AT89C51, 3 ADC-0804, a LM35 temperature sensor and IC MAX 232. The IC MAX 232 component is used to connect the micro controller to the personal computer serially by using RS-232 standard. While ADC-0804 was used to convert the analog data (DC voltage) to the digital one so that the data was readable by the micro controller. Digital data from 3 ADC-0804 circuit which have been read by the micro controller was sent directly to the personal computer. The data from the measurement which have been stored in the personal computer was then processed to know the value of temperature and measured thermistor resistance. The processed data could be either stored in a data base or displayed in a monitor or printed in the form of table data and in the form a graph of thermistor resistance as the function of temperature. The result of measurement from measuring instrument of the characteristic of thermistor electric's had been made, being compared by measuring calibrated instrument, the deviation is about 0.33 %. (author)

  1. Analysis of polarization characteristics of plant canopies using ground-based remote sensing measurements

    International Nuclear Information System (INIS)

    Sid’ko, A.F.; Botvich, I.Yu.; Pisman, T.I.; Shevyrnogov, A.P.

    2014-01-01

    The paper presents results and analysis of a study on polarized characteristics of the reflectance factor of different plant canopies under field conditions, using optical remote sensing techniques. Polarization characteristics were recorded from the elevated work platform at heights of 10–18 m in June and July. Measurements were performed using a double-beam spectrophotometer with a polarized light filter attachment, within the spectral range from 400 to 820 nm. The viewing zenith angle was below 20 degree. Birch (Betila pubescens), pine (Pinus sylvestris L.), wheat (Triticum acstivum) [L.] crops, corn (Zea mays L. ssp. mays) crops, and various grass canopies were used in this study. The following polarization characteristics were studied: the reflectance factor of the canopy with the polarizer adjusted to transmit the maximum and minimum amounts of light (R max and R min ), polarized component of the reflectance factor (R q ), and the degree of polarization (P). Wheat, corn, and grass canopies have higher R max and R min values than forest plants. The R q and P values are higher for the birch than for the pine within the wavelength range between 430 and 740 nm. The study shows that polarization characteristics of plant canopies may be used as an effective means of decoding remote sensing data. - Highlights: • The reflection and polarization properties of plant were studied. • The compiled electronic database of the spectrophotometric information of plant. • Polarization characteristics are a source of useful data on the state of plants

  2. Characteristics of Antimicrobial Stewardship Programs at Veterans Affairs Hospitals: Results of a Nationwide Survey.

    Science.gov (United States)

    Chou, Ann F; Graber, Christopher J; Jones, Makoto; Zhang, Yue; Goetz, Matthew Bidwell; Madaras-Kelly, Karl; Samore, Matthew; Kelly, Allison; Glassman, Peter A

    2016-06-01

    BACKGROUND Antimicrobial stewardship programs (ASPs) are variably implemented. OBJECTIVE To characterize variations of antimicrobial stewardship structure and practices across all inpatient Veterans Affairs facilities in 2012 and correlate key characteristics with antimicrobial usage. DESIGN A web-based survey regarding stewardship activities was administered to each facility's designated contact. Bivariate associations between facility characteristics and inpatient antimicrobial use during 2012 were determined. SETTING Total of 130 Veterans Affairs facilities with inpatient services. RESULTS Of 130 responding facilities, 29 (22%) had a formal policy establishing an ASP, and 12 (9%) had an approved ASP business plan. Antimicrobial stewardship teams were present in 49 facilities (38%); 34 teams included a clinical pharmacist with formal infectious diseases (ID) training. Stewardship activities varied across facilities, including development of yearly antibiograms (122 [94%]), formulary restrictions (120 [92%]), stop orders for antimicrobial duration (98 [75%]), and written clinical pathways for specific conditions (96 [74%]). Decreased antimicrobial usage was associated with having at least 1 full-time ID physician (P=.03), an ID fellowship program (P=.003), and a clinical pharmacist with formal ID training (P=.006) as well as frequency of systematic patient-level reviews of antimicrobial use (P=.01) and having a policy to address antimicrobial use in the context of Clostridium difficile infection (P=.01). Stop orders for antimicrobial duration were associated with increased use (P=.03). CONCLUSIONS ASP-related activities varied considerably. Decreased antibiotic use appeared related to ID presence and certain select practices. Further statistical assessments may help optimize antimicrobial practices. Infect Control Hosp Epidemiol 2016;37:647-654.

  3. Measurement of tonal-noise characteristics and periodic flow structure around NACA0018 airfoil

    Energy Technology Data Exchange (ETDEWEB)

    Nakano, T.; Fujisawa, N. [Niigata University, Department Mechanical Engineering, Niigata (Japan); Lee, S. [Inha University, Department Mechanical Engineering, Incheon (Korea)

    2006-03-15

    The characteristics of tonal noise and the variations of flow structure around NACA0018 airfoil in a uniform flow are studied by means of simultaneous measurement of noise and velocity field by particle-image velocimetry to understand the generation mechanism of tonal noise. Measurements are made on the noise characteristics, the phase-averaged velocity field with respect to the noise signal, and the cross-correlation contour of velocity fluctuations and noise signal. These experimental results indicate that the tonal noise is generated from the periodic vortex structure on the pressure surface of the airfoil near the trailing edge of the airfoil. It is found that the vortex structure is highly correlated with the noise signal, which indicates the presence of noise-source distribution on the pressure surface. The vorticity distribution on the pressure surface breaks down near the trailing edge of the airfoil and forms a staggered vortex street in the wake of the airfoil. (orig.)

  4. Acoustic Signal Characteristics Measured with the LAMBDA III During CHURCH STROKE III

    Science.gov (United States)

    1980-09-15

    analysis. Dr. William M. Carey and Dr. Richard Doolittle participated in various stages of acquisition, processing and analysis of the information...reported herein. Drs. Carey , Doolittle and Mr. Gereben are the authors of this report. (U) This report: Acoustic Signal Characteristics Measured with... Tortugas Terrace and the East Yucatan Channel,the Catoche Tongue and the Eastern region of the Gulf of Mexico. (U) The exercise was conducted by the Long

  5. Usage of performance measurement and evaluation systems : the impact of evaluator characteristics

    OpenAIRE

    Gelderman, Maarten

    1998-01-01

    This paper discusses the relation between characteristics of the evaluating manager and the way performance measurement and evaluation information is used. First a discussion is provided about the dependent variable. It is recognized that categorization into archetypes (e.g., evaluative styles) is unsatisfactory. Instead the information content/emphasis dimensions financial-non- financial, quantitative-qualitative, process-outcome, past-future and external-internal, along with the dimension f...

  6. Assessing reserve-building pursuits and person characteristics: psychometric validation of the Reserve-Building Measure.

    Science.gov (United States)

    Schwartz, Carolyn E; Michael, Wesley; Zhang, Jie; Rapkin, Bruce D; Sprangers, Mirjam A G

    2018-02-01

    A growing body of research suggests that regularly engaging in stimulating activities across multiple domains-physical, cultural, intellectual, communal, and spiritual-builds resilience. This project investigated the psychometric characteristics of the DeltaQuest Reserve-Building Measure for use in prospective research. The study included Rare Patient Voice panel participants. The web-based survey included the Reserve-Building Measure with one-week re-test, measures of quality of life (QOL) and well-being (PROMIS General Health; NeuroQOL Cognitive Function and Positive Affect & Well-Being short-forms; Ryff Environmental Mastery subscale); and the Big Five Inventory-10 personality measure. Classical test theory and item response theory (IRT) analyses investigated psychometric characteristics of the Reserve-Building Measure. This North American sample (n = 592) included both patients and caregivers [mean age = 44, SD 19)]. Psychometric analyses revealed distinct subscales measuring current reserve-building activities (Active in the World, Games, Outdoors, Creative, Religious/Spiritual, Exercise, Inner Life, Shopping/Cooking, Passive Media Consumption,), past reserve-building activities (Childhood Activities, Achievement), and reserve-related person-factors (Perseverance, Current and Past Social Support, and Work Value). Test-retest stability (n = 101) was moderately high for 11 of 15 subscales (ICC range 0.78-0.99); four were below 0.59 indicating a need for further refinement. IRT analyses supported the item functioning of all subscales. Correlational analyses suggest the measure's subscales tap distinct constructs (range r = 0.11-0.46) which are not redundant with QOL, well-being, or personality (range r = 0.11-0.48). The Reserve-Building Measure provides a measure of activities and person-factors related to reserve that may potentially be useful in prospective research.

  7. Measuring learning, student engagement, and program effectiveness: a strategic process.

    Science.gov (United States)

    Jantzi, Julie; Austin, Connie

    2005-01-01

    What if there was an effective way to address the age-old question from students, "Why do we have to do this assignment?" And from faculty, "How do we know our students are really learning?" And from administrators, "How will we demonstrate to our peers, our accrediting agencies, and other program stakeholders that our programs are educationally effective?" As it undertook a curriculum redesign, faculty in a baccalaureate school of nursing developed a 9-step process for curriculum implementation. The authors discuss how they applied the 9 steps strategically, positioning the program for 2 successful accreditation self-studies and concurrently addressing, with greater confidence, some of these age-old questions.

  8. [Classification and characteristics of interval cancers in the Principality of Asturias's Breast Cancer Screening Program].

    Science.gov (United States)

    Prieto García, M A; Delgado Sevillano, R; Baldó Sierra, C; González Díaz, E; López Secades, A; Llavona Amor, J A; Vidal Marín, B

    2013-09-01

    To review and classify the interval cancers found in the Principality of Asturias's Breast Cancer Screening Program (PDPCM). A secondary objective was to determine the histological characteristics, size, and stage of the interval cancers at the time of diagnosis. We included the interval cancers in the PDPCM in the period 2003-2007. Interval cancers were classified according to the breast cancer screening program protocol, with double reading without consensus, without blinding, with arbitration. Mammograms were interpreted by 10 radiologists in the PDPCM. A total of 33.7% of the interval cancers could not be classified; of the interval cancers that could be classified, 40.67% were labeled true interval cancers, 31.4% were labeled false negatives on screening, 23.7% had minimal signs, and 4.23% were considered occult. A total of 70% of the interval cancers were diagnosed in the year of the period between screening examinations and 71.7% were diagnosed after subsequent screening. A total of 76.9% were invasive ductal carcinomas, 61.1% were stage II when detected, and 78.7% were larger than 10mm when detected. The rate of interval cancers and the rate of false negatives in the PDPCM are higher than those recommended in the European guidelines. Interval cancers are diagnosed later than the tumors detected at screening. Studying interval cancers provides significant training for the radiologists in the PDPCM. Copyright © 2011 SERAM. Published by Elsevier Espana. All rights reserved.

  9. Comparison of characteristics between frequent participants and non-participants in screening program for stomach cancer.

    Science.gov (United States)

    Fukao, A; Hisamichi, S; Komatsu, S; Shimizu, H; Satoh, H; Nakatsuka, H; Watanabe, T; Fujisaku, S; Ichinowatari, Y; Kuroda, S

    1992-04-01

    To clarify the differences in characteristics between participants and non-participants in the screening program for stomach cancer, life-style and medical histories were compared among 20, 169 subjects who lived in an urban area (Sendai) and a rural area (Wakuya and Tajiri) in Miyagi Prefecture, Japan. All subjects were classified into three groups according to the frequency of participation in the screening program during the last 5 years; i.e., frequent participating group (FPG) for 4 or 5 times, reference group (RG) for 1-3 times and non-participating group (NPG) for 0 times. Subjects in the FPG consumed more milk and green-yellow vegetable whereas those in the NPG consumed less these foods. The age-adjusted proportions of present smokers were higher in the NPG but lower in the FPG significantly. The proportions of subjects who had parental histories of all cancers and stomach cancer and past history of gastro-duodenal ulcer were higher in the FPG and lower in the NPG. To control influences among the variables a stepwise multiple regression analysis was done, and it revealed that smoking and parental history of cancers were strong predictors to explain the frequency of participation.

  10. Ground-Based Photometric Measurements HAES Program Support.

    Science.gov (United States)

    1979-01-31

    A3, A-, E, F (J) Spatial structure of optical irregularities from F (K) Auroral electric fields from G, (BI, 132) ( L ) Pederson and Hall...investigator on this program was Mr. R. D. Sears. Also contributing significantly to the program were D. R. Hillendahl and G. Rogers . We acknowledge the...WBM experiment 57 23 Plot of height-integrated Pederson conductivities versus horizontal distance from Chatanika zenith for WBM experiment 58 24

  11. Detailed Characteristics of Radiation Belt Electrons Revealed by CSSWE/REPTile Measurements

    Science.gov (United States)

    Zhang, K.; Li, X.; Schiller, Q.; Gerhardt, D. T.; Millan, R. M.

    2016-12-01

    The outer radiation belt electrons are highly dynamic. We study the detailed characteristics of the relativistic electrons in the outer belt using measurements from the Colorado Student Space Weather Experiment (CSSWE) mission, a low Earth orbit Cubesat, which transverses the radiation belt four times in one orbit ( 1.5 hr) and has the advantage of measuring the dynamic activities of the electrons including their rapid precipitations. Among the features of the relativistic electrons, we show the measured electron distribution as a function of geomagnetic activities and local magnetic field strength. Moreover, a specific precipitation band, which happened on 19 Jan 2013, is investigated based on the conjunctive measurement of CSSWE and the Balloon Array for Radiation belt Relativistic Electron Losses (BARREL). In this precipitation band event, the net loss of the 0.58 1.63 MeV electrons (L=3.5 6) is estimated to account for 6.84% of the total electron content.

  12. Analysis of Generator Oscillation Characteristics Based on Multiple Synchronized Phasor Measurements

    Science.gov (United States)

    Hashiguchi, Takuhei; Yoshimoto, Masamichi; Mitani, Yasunori; Saeki, Osamu; Tsuji, Kiichiro

    In recent years, there has been considerable interest in the on-line measurement, such as observation of power system dynamics and evaluation of machine parameters. On-line methods are particularly attractive since the machine’s service need not be interrupted and parameter estimation is performed by processing measurements obtained during the normal operation of the machine. Authors placed PMU (Phasor Measurement Unit) connected to 100V outlets in some Universities in the 60Hz power system and examine oscillation characteristics in power system. PMU is synchronized based on the global positioning system (GPS) and measured data are transmitted via Internet. This paper describes an application of PMU for generator oscillation analysis. The purpose of this paper is to show methods for processing phase difference and to estimate damping coeffcient and natural angular frequency from phase difference at steady state.

  13. Disaster Characteristics and Mitigation Measures of Huge Glacial Debris Flows along the Sichuan-Tibet Railway

    Science.gov (United States)

    Liu, Jinfeng; You, Yong; Zhang, Guangze; Wang, Dong; Chen, Jiangang; Chen, Huayong

    2017-04-01

    The Ranwu-Tongmai section of the Sichuan-Tibet Railway passes through the Palongzangbu River basin which locates in the southeast Qinghai-Tibetan Plateau. Due to widely distributed maritime glacier in this area, the huge glacier debris flows are very developed. Consequently, the disastrous glacier debris flows with huge scale (106-108 m3 for one debris flow event) and damage become one of the key influencing factors for the route alignment of the Sichuan-Tibet Railway. The research on disaster characteristics and mitigation measures of huge glacial debris flows in the study area were conducted by the remote sensing interpretation, field investigation, parameter calculation and numerical simulation. Firstly, the distribution of the glaciers, glacier lakes and glacier debris flows were identified and classified; and the disaster characteristics for the huge glacier debris flow were analyzed and summarized. Secondly, the dynamic parameters including the flood peak discharge, debris flow peak discharge, velocity, total volume of a single debris flow event were calculated. Based on the disaster characteristics and the spatial relation with the railway, some mitigation principles and measures were proposed. Finally, the Guxiang Gully, where a huge glacier debris flow with 2*108m3 in volume occurred in 1953, was selected as a typical case to analyze its disaster characteristics and mitigation measures. The interpretation results show that the glacier area is about 970 km2 which accounts for 19% of the total study area. 130 glacier lakes and 102 glacier debris flows were identified and classified. The Sichuan-Tibet Railway passes through 43 glacier debris flows in the study area. The specific disaster characteristics were analyzed and corresponding mitigation measures were proposed for the route selection of the railway. For the Guxiang Gully, a numerical simulation to simulate the deposition condition at the alluvial fan was conducted. the simulation results show that the

  14. Customisation and Desirable Characteristics of a Standard Method of Measurement for Building Works in Ghana

    Directory of Open Access Journals (Sweden)

    Gabriel Nani

    2012-11-01

    Full Text Available This paper reports a study that identified andcategorised the modifications to the 5thEdition of the British Standard Method ofMeasurement (SMM5 of building works inGhana. Typical modifications involved ‘costinsignificant items’, ‘minor labour items’,‘custom units of measurement’, ‘methodrelated items’, ‘combinable items’,‘subordinate items’, and ‘items of minorinformative impact’. It was also observed thatthe desirable characteristics/ qualities ofstandard methods of measurement (SMM ofbuilding work were noteworthy, since theyprovide insight into the nature of a SMMrequired for the construction industry inGhana.The research reviewed available literature,various SMMs and bills of quantities (BQs.The relevance of the modifications andSMM characteristics identified wasconfirmed by a survey of the opinions ofprofessional quantity surveyors conductedthrough a carefully designed questionnaire.Inferences from the opinion survey formedthe basis for grouping both SMMmodifications found and the desired qualitiesof a SMM for Ghana.Survey respondents confirmed all theidentified modifications to the British SMM,except for the elimination of items of minorinformative impact. It was held that allinformation was relevant in measurement.Desirable characteristics of a SMM were ratedin decreasing order of relevance as: easylocation of items; cost significance; simplicity;thoroughness; ease of cost analysis; goodpractice; conciseness; adoptability; precision;industry practice; stakeholders’ opinion;custom classification; regional relevance; andinclusion of jargon. It was noted that therelevance of these characteristics may varyform one region to the other as a result oftechnological, cultural and legal differences.However, the desired SMM characteristicswere recommended as fundamental indeveloping an appropriate SMM for Ghana.

  15. A qualitative assessment of program characteristics for preventing secondary conditions in individuals with fetal alcohol spectrum disorders.

    Science.gov (United States)

    Patrenko, Christie L M; Tahir, Naira; Mahoney, Erin C; Chin, Nancy P

    2014-01-01

    Fetal alcohol spectrum disorders (FASD) are a major public health problem that affects 2 to 5 percent of the population. Individuals with FASD are at high risk for secondary conditions, such as mental health problems, school disruptions, and trouble with the law. Evidence-based intervention programs are needed to prevent and treat secondary conditions in this population. The purpose of this study was to identify intervention program characteristics for preventing secondary conditions in individuals with FASD from the perspectives of parents and service providers. This qualitative study utilized a phenomenological approach to identify program characteristics for preventing secondary conditions. Twenty-five parents of children (ages 3 to 33) with FASD and 18 service providers participated in focus groups or individual interviews. Data was systematically analyzed using a framework approach. Themes did not differ by participant type. Participants emphasized five primary characteristics of intervention programs for individuals with FASD. Programs need to 1) be available to individuals across the lifespan, 2) have a prevention focus, 3) be individualized, 4) be comprehensive, and 5) be coordinated across systems and developmental stages. Participants discussed a variety of specific intervention strategies for each developmental stage and setting. Program characteristics identified in this study are consistent with a positive behavior support framework. This framework is discussed in the context of research on existing interventions for individuals with FASD, and recommendations for future intervention development and evaluation are highlighted.

  16. Identification of characteristic frequencies of damaged railway tracks using field hammer test measurements

    Science.gov (United States)

    Oregui, M.; Li, Z.; Dollevoet, R.

    2015-03-01

    In this paper, the feasibility of the Frequency Response Function (FRF)-based statistical method to identify the characteristic frequencies of railway track defects is studied. The method compares a damaged track state to a healthy state based on non-destructive field hammer test measurements. First, a study is carried out to investigate the repeatability of hammer tests in railway tracks. By changing the excitation and measurement locations it is shown that the variability introduced by the test process is negligible. Second, following the concepts of control charts employed in process monitoring, a method to define an approximate healthy state is introduced by using hammer test measurements at locations without visual damage. Then, the feasibility study includes an investigation into squats (i.e. a major type of rail surface defect) of varying severity. The identified frequency ranges related to squats agree with those found in an extensively validated vehicle-borne detection system. Therefore, the FRF-based statistical method in combination with the non-destructive hammer test measurements has the potential to be employed to identify the characteristic frequencies of damaged conditions in railway tracks in the frequency range of 300-3000 Hz.

  17. In situ real-time measurement of physical characteristics of airborne bacterial particles

    Science.gov (United States)

    Jung, Jae Hee; Lee, Jung Eun

    2013-12-01

    Bioaerosols, including aerosolized bacteria, viruses, and fungi, are associated with public health and environmental problems. One promising control method to reduce the harmful effects of bioaerosols is thermal inactivation via a continuous-flow high-temperature short-time (HTST) system. However, variations in bioaerosol physical characteristics - for example, the particle size and shape - during the continuous-flow inactivation process can change the transport properties in the air, which can affect particle deposition in the human respiratory system or the filtration efficiency of ventilation systems. Real-time particle monitoring techniques are a desirable alternative to the time-consuming process of microscopic analysis that is conventionally used in sampling and particle characterization. Here, we report in situ real-time optical scattering measurements of the physical characteristics of airborne bacteria particles following an HTST process in a continuous-flow system. Our results demonstrate that the aerodynamic diameter of bacterial aerosols decreases when exposed to a high-temperature environment, and that the shape of the bacterial cells is significantly altered. These variations in physical characteristics using optical scattering measurements were found to be in agreement with the results of scanning electron microscopy analysis.

  18. Validity of self-reported periodontal measures, demographic characteristics and systemic medical conditions.

    Science.gov (United States)

    Chatzopoulos, Georgios S; Cisneros, Alejandro; Sanchez, Miguel; Lunos, Scott; Wolff, Larry F

    2018-04-06

    The objective of the present study was to assess self-reported periodontal screening questions, demographic characteristics, systemic medical conditions and tobacco use for predicting periodontal disease among individuals seeking dental therapy in a university dental clinic. In this retrospective study, a total of 4,890 randomly selected dental charts were evaluated from among patients who had attended the University of Minnesota School of Dentistry clinics for treatment. Radiographic bone loss measurements were utilized to assess the severity of periodontal disease. Demographic characteristics as well as medical history of the patients were also recorded. Five self-reported periodontal screening questions were included with the range of answers limited to Yes/No. Generalized logit models were used to assess the association between bone loss and the predictors. The sample mean age was 54.1 years and included 52.6% males and 14.9% smokers with a mean number of missing teeth of 3.5. Self-reported tooth mobility, history of "gum treatment" and the importance to keep the teeth as well as age, tobacco use and cancer were statistically significant (p brushing", gender, diabetes, anxiety and arthritis. Self-reported periodontal screening questions as well as demographic characteristics, smoking and systemic medical conditions were significant predictors of periodontal disease and they could be used as valid, economical and practical measures. This article is protected by copyright. All rights reserved. © 2018 American Academy of Periodontology.

  19. Comparing a telephone- and a group-delivered diabetes prevention program: Characteristics of engaged and non-engaged postpartum mothers with a history of gestational diabetes.

    Science.gov (United States)

    Lim, Siew; Dunbar, James A; Versace, Vincent L; Janus, Edward; Wildey, Carol; Skinner, Timothy; O'Reilly, Sharleen

    2017-04-01

    To explore the acceptability of a telephone- or a group-delivered diabetes prevention program for women with previous gestational diabetes and to compare the characteristics associated with program engagement. Postpartum women participated in a lifestyle modification program delivered by telephone (n=33) or group format (n=284). Semi-structured interviews on barriers and enablers to program engagement (defined as completing≥80% sessions) were conducted before (Group) and after (Group and Telephone) interventions. The Health Action Process Approach theory was used as the framework for inquiry. Psychological measures were compared between engagement subgroups before and after group-delivered intervention. In the telephone-delivered program 82% participants met the engagement criteria compared with 38% for the group-delivered program. Engaged participants (Group) had significantly higher risk perception, outcome expectancy, and activity self-efficacy at baseline (P<0.05). There was a greater decrease in body weight (-1.45±3.9 vs -0.26±3.5, P=0.024) and waist circumference (-3.56±5.1 vs -1.24±5.3, P=0.002) for engaged vs non-engaged participants following group program completion. Telephone delivery was associated with greater engagement in postpartum women. Engagement was associated with greater reduction in weight and waist circumference. Further studies are required to confirm the effectiveness of telephone-delivered program for diabetes prevention in postpartum women. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Thermal surface characteristics of coal fires 1 results of in-situ measurements

    Science.gov (United States)

    Zhang, Jianzhong; Kuenzer, Claudia

    2007-12-01

    Natural underground coal fires are fires in coal seams occurring subsurface. The fires are ignited through a process named spontaneous combustion, which occurs based on a natural reaction but is usually triggered through human interaction. Coal mining activities expose coal to the air. This leads to the exothermal oxidation of the carbon in the coal with the air's oxygen to CO 2 and - under certain circumstances - to spontaneous combustion. Coal fires occur in many countries world wide - however, currently the Chinese coal mining industry faces the biggest problems with coal fires. Coal fires destroy the valuable resource coal and furthermore lead to many environmental degradation phenomena such as the deterioration of surrounding vegetation, land subsidence and the emission of toxic gasses (CO, N 2O). They additionally contribute to the emission of green house relevant gasses such as CO 2 and CH 4 to the atmosphere. In this paper we present thermal characteristics of coal fires as measured in-situ during a field campaign to the Wuda coal fire area in south-central Inner Mongolia, China. Thermal characteristics include temperature anomaly measurements at the surface, spatial surface temperature profiles of fire areas and unaffected background areas, diurnal temperature profiles, and temperature measurements inside of coal fire induced cracks in the overlying bedrock. For all the measurements the effects of uneven solar heating through influences of slope and aspect are considered. Our findings show that coal fires result in strong or subtle thermal surface anomalies. Especially the latter can easily be influenced by heating of the surrounding background material through solar influences. Temperature variation of background rocks with different albedo, slope, aspect or vegetation cover can substantially influence the detectability of thermal anomalies. In the worst case coal fire related thermal anomalies can be completely masked by solar patterns during the daytime

  1. Figures of merit for measuring aging management program effectiveness

    International Nuclear Information System (INIS)

    Knudson, R.; Sciacca, F.; Walsh, R.; Zigler, G.

    1991-01-01

    One of the requirements for nuclear plant license renewal may be the establishment and demonstration of an effective aging management program. An analysis of both qualitative and quantitative information will be required to define the contents of this aging management program. The authors propose two quantitative figures of merit, Mean Event Detection Frequency and Mean Renewal Rate, that can be used to compare the effectiveness of various inspection, surveillance, test, and monitoring (ISTM) activities for aging mitigation. An example showing the relative effectiveness of an enhanced Loose Parts Monitoring System with current ISTM activities for steam generators and reactor internals is provided. (author)

  2. "Hook"-calibration of GeneChip-microarrays: Chip characteristics and expression measures

    Directory of Open Access Journals (Sweden)

    Krohn Knut

    2008-08-01

    Full Text Available Abstract Background Microarray experiments rely on several critical steps that may introduce biases and uncertainty in downstream analyses. These steps include mRNA sample extraction, amplification and labelling, hybridization, and scanning causing chip-specific systematic variations on the raw intensity level. Also the chosen array-type and the up-to-dateness of the genomic information probed on the chip affect the quality of the expression measures. In the accompanying publication we presented theory and algorithm of the so-called hook method which aims at correcting expression data for systematic biases using a series of new chip characteristics. Results In this publication we summarize the essential chip characteristics provided by this method, analyze special benchmark experiments to estimate transcript related expression measures and illustrate the potency of the method to detect and to quantify the quality of a particular hybridization. It is shown that our single-chip approach provides expression measures responding linearly on changes of the transcript concentration over three orders of magnitude. In addition, the method calculates a detection call judging the relation between the signal and the detection limit of the particular measurement. The performance of the method in the context of different chip generations and probe set assignments is illustrated. The hook method characterizes the RNA-quality in terms of the 3'/5'-amplification bias and the sample-specific calling rate. We show that the proper judgement of these effects requires the disentanglement of non-specific and specific hybridization which, otherwise, can lead to misinterpretations of expression changes. The consequences of modifying probe/target interactions by either changing the labelling protocol or by substituting RNA by DNA targets are demonstrated. Conclusion The single-chip based hook-method provides accurate expression estimates and chip-summary characteristics

  3. Indoor measurement of photovoltaic device characteristics at varying irradiance, temperature and spectrum for energy rating

    International Nuclear Information System (INIS)

    Bliss, M; Betts, T R; Gottschalg, R

    2010-01-01

    The first three-dimensional performance matrix for use in photovoltaic (PV) energy rating is reported utilizing a novel energy rating solar simulator based on LEDs. Device characteristics are measured indoors at varying irradiance (G), temperature (T) and spectrum (E). This opens the possibility for a more accurate measurement system for energy yield prediction of PV devices, especially for devices with high spectral dependence such as wide bandgap solar cells as they take into account spectral changes in the light. The main aspects of the LED-based solar simulator used are briefly described. A measurement method is developed and detailed in the paper, which takes into account the current imperfections in the achievable spectrum. Measurement results for a crystalline silicon solar cell are used to demonstrate the measurement approach. An uncertainty analysis of the measurement system is given, resulting in an overall absolute uncertainty of 4.3% (coverage factor k = 2) in maximum power measurements at 765 W m −2 irradiance with scope for further improvements

  4. Military Families’ Perceptions of Neighborhood Characteristics Affecting Reintegration: Development of an Aggregate Measure

    Science.gov (United States)

    Beehler, Sarah; Ahern, Jennifer; Balmer, Brandi; Kuhlman, Jennifer

    2017-01-01

    This pilot study evaluated the validity and reliability of an Experience of Neighborhood (EON) measure developed to assess neighborhood characteristics that shape reintegration opportunities for returning service members and their families. A total of 91 post-9/11 veterans and spouses completed a survey administered at the Minnesota State Fair. Participants self-reported on their reintegration status (veterans), social functioning (spouses), social support, and mental health. EON factor structure, internal consistency reliability, and validity (discriminant, content, criterion) were analyzed. The EON measure showed adequate reliability, discriminant validity, and content validity. More work is needed to assess criterion validity because EON scores were not correlated with scores on a Census-based index used to measure quality of military neighborhoods. The EON may be useful in assessing broad local factors influencing health among returning veterans and spouses. More research is needed to understand geographic variation in neighborhood conditions and how those affect reintegration and mental health for military families. PMID:28936370

  5. Residential characteristics and radiofrequency electromagnetic field exposures from bedroom measurements in Germany

    DEFF Research Database (Denmark)

    Breckenkamp, J; Blettner, M; Schüz, J

    2012-01-01

    The objectives of this study were to assess total exposure to radiofrequency electromagnetic fields (RF-EMF) in bedrooms and the contribution of different radioservices (FM radio, analogue TV and DVB-T, TETRA, GSM900 downlink, GSM1800 downlink, UMTS downlink, DECT, and wireless LAN and blue tooth......) to the total exposure. Additional aims were to describe the proportion of measuring values above the detection limit of the dosimeters and to characterize the differences in exposure patterns associated with self-reported residential characteristics. Exposure to RF sources in bedrooms was measured using...... Antennessa(®) EME Spy 120 dosimeters in 1,348 households in Germany; 280 measures were available for each frequency band per household. Mean electrical field strengths and power flux densities were calculated. Power flux densities allow the calculation of proportions of different radioservices on total...

  6. Biopsychosocial Characteristics, Using a New Functional Measure of Balance, of an Elderly Population with CLBP

    Directory of Open Access Journals (Sweden)

    Ryan Hulla

    2016-08-01

    Full Text Available This study examined the biopsychosocial characteristics of chronic low back pain (CLBP in an understudied but increasingly larger part of the population: the elderly (i.e., 65 years and older. A new innovative physical functioning measure (postural control, which is a proxy for the common problem of slips and falls in the elderly was part of this biopsychosocial evaluation. Also, the National Institutes of Health (NIH-developed Patient-Reported Outcome Measurement Information System (PROMIS was also part of this comprehensive evaluation. Two demographically-matched groups of elderly participants were evaluated: one with CLBP (n = 24; and the other without (NCLBP, n = 24. Results revealed significant differences in most of these measures between the two groups, further confirming the importance of using a biopsychosocial approach for future studies of pain and postural control in the elderly.

  7. Experimental measurements of the ion cyclotron antennas' coupling and rf characteristics

    International Nuclear Information System (INIS)

    Hoffman, D.J.; Baity, F.W.; Becraft, W.R.; Caughman, J.B.O.; Owens, T.L.

    1985-01-01

    The rf coupling capabilities and characteristics of various antennas have been measured. The tested antenna configurations include the simple loop antenna operated at resonant lengths as used on Alcator-C, the cavity antenna proposed for Doublet III-D and the resonant double loop, asymmetric resonant double loop, and U-slot antennas. Models of the voltage, magnetic fields outside the structure, and current have been correlated with the measurements made on these antennas. From these measurements and from typical observations of ICRH coupling in tokamaks, we are studying power and frequency limitations on each antenna and the causes of the limitations. A comparison of the technology, performance, and power limitations of each type of antenna is presented

  8. A measurement control program for plutonium isotopic gamma-ray systems at the Rocky Flats Plant

    International Nuclear Information System (INIS)

    Fleissner, J.G.

    1986-01-01

    A sound measurement control (MC) program should be an integral part of every nondestructive assay measurement system used for the assay of special nuclear materials. This paper describes a measurement control program for plutonium isotopic composition measurements, using high-resolution gamma-ray spectroscopy, that has been implemented in the Analytical Laboratories and the Chemistry Standards Laboratory at the Rocky Flats Plant. This MC program emphasizes the standardization of data collection procedures along with the implementation of internal and external measurement control checks to provide the requisite measurement quality assurance

  9. A review of modern instrumental techniques for measurements of ice cream characteristics.

    Science.gov (United States)

    Bahram-Parvar, Maryam

    2015-12-01

    There is an increasing demand of the food industries and research institutes to have means of measurement allowing the characterization of foods. Ice cream, as a complex food system, consists of a frozen matrix containing air bubbles, fat globules, ice crystals, and an unfrozen serum phase. Some deficiencies in conventional methods for testing this product encourage the use of alternative techniques such as rheometry, spectroscopy, X-ray, electro-analytical techniques, ultrasound, and laser. Despite the development of novel instrumental applications in food science, use of some of them in ice cream testing is few, but has shown promising results. Developing the novel methods should increase our understanding of characteristics of ice cream and may allow online testing of the product. This review article discusses the potential of destructive and non-destructive methodologies in determining the quality and characteristics of ice cream and similar products. Copyright © 2015. Published by Elsevier Ltd.

  10. Equilibrium adsorption data from temperature-programmed desorption measurements

    NARCIS (Netherlands)

    Foeth, F.; Mugge, J.M.; van der Vaart, R.; van der Vaart, Rick; Bosch, H.; Reith, T.

    1996-01-01

    This work describes a novel method that enables the calculation of a series of adsorption isotherms basically from a single Temperature-Programmed Desorption (TPD) experiment. The basic idea is to saturate an adsorbent packed in a fixed bed at a certain feed concentration and temperature and to

  11. Computer programs for optical dendrometer measurements of standing tree profiles

    Science.gov (United States)

    Jacob R. Beard; Thomas G. Matney; Emily B. Schultz

    2015-01-01

    Tree profile equations are effective volume predictors. Diameter data for building these equations are collected from felled trees using diameter tapes and calipers or from standing trees using optical dendrometers. Developing and implementing a profile function from the collected data is a tedious and error prone task. This study created a computer program, Profile...

  12. Measuring Service Quality in Recreational Programs with SERVQUAL.

    Science.gov (United States)

    Bauch, Joel R.

    Many directors of college recreational programs are feeling pressure for increased accountability in the face of shrinking financial resources and increased demand for services. One method of providing that accountability and learning about the strengths and weaknesses of services offered is by assessing the level of client satisfaction. Developed…

  13. How Bigelow Laboratory Measured Broader Impacts: The Case Study of the Evaluation of the Keller BLOOM Program (Invited)

    Science.gov (United States)

    Fowler, R. A.; Repa, J.

    2010-12-01

    In this presentation we discuss the impetus for, the results of the short and long term effects, and the impacts of the Keller BLOOM Program, hosted by Bigelow Laboratory for Ocean Sciences of West Boothbay Harbor, Maine. Each May, for the last 21 years, 16 bright high school juniors, one from each county in Maine, have been invited to spend five days with the research scientists at the lab conducting and reporting research on the bottom layers of the ocean’s food chain: phytoplankton and zooplankton. Bigelow has chosen to evaluate BLOOM through a series of questionnaires delivered during the program, and long term tracking of participants after the program, in order to better understand the impact of the program on participants. The short term effect of the experience, measured at the end of the week, found that participants are able to: 1) develop testable research questions, 2) collect multiple water samples from a local estuary, 3) measure various characteristics of those samples with the sophisticated instruments in Bigelow’s labs assisted by their research scientists, 4) analyze and integrate the results from the various labs, and 5) present their findings to a non-scientific audience. To measure long term participation effects, a random sample of 40 of the 332 participants were interviewed resulting in the following findings: 100% attend college; 62% have STEM majors; 88% graduate from college; 57% pursue STEM careers; and 60% live and work in Maine. Bigelow scientists include a description of the BLOOM Program and the evaluation results in their NSF Broader Impacts statements to demonstrate that their research activities are being integrated into a successful STEM education program. Evaluation results are also used by Bigelow scientists and program administrators to refine program content and delivery, to promote the program to potential applicants, and to strengthen proposals to funding agencies when seeking financial support for BLOOM.

  14. Relationship of residency program characteristics with pass rate of the American Board of Internal Medicine certifying exam

    Directory of Open Access Journals (Sweden)

    Amporn Atsawarungruangkit

    2015-09-01

    Full Text Available Objectives: To evaluate the relationship between the pass rate of the American Board of Internal Medicine (ABIM certifying exam and the characteristics of residency programs. Methods: The study used a retrospective, cross-sectional design with publicly available data from the ABIM and the Fellowship and Residency Electronic Interactive Database. All categorical residency programs with reported pass rates were included. Using univariate and multivariate, linear regression analyses, I analyzed how 69 factors (e.g., location, general information, number of faculty and trainees, work schedule, educational environment are related to the pass rate. Results: Of 371 programs, only one region had a significantly different pass rate from the other regions; however, as no other characteristics were reported in this region, I excluded program location from further analysis. In the multivariate analysis, pass rate was significantly associated with four program characteristics: ratio of full-time equivalent paid faculty to positions, percentage of osteopathic doctors, formal mentoring program, and on-site child care (OCC. Numerous factors were not associated at all, including minimum exam scores, salary, vacation days, and average hours per week. Conclusions: As shown through the ratio of full-time equivalent paid faculty to positions and whether there was a formal mentoring program, a highly supervised training experience was strongly associated with the pass rate. In contrast, percentage of osteopathic doctors was inversely related to the pass rate. Programs with OCC significantly outperformed programs without OCC. This study suggested that enhancing supervision of training programs and offering parental support may help attract and produce competitive residents.

  15. A Study on Measurement Variations in Resonant Characteristics of Electrostatically Actuated MEMS Resonators

    Directory of Open Access Journals (Sweden)

    Faisal Iqbal

    2018-04-01

    Full Text Available Microelectromechanical systems (MEMS resonators require fast, accurate, and cost-effective testing for mass production. Among the different test methods, frequency domain analysis is one of the easiest and fastest. This paper presents the measurement uncertainties in electrostatically actuated MEMS resonators, using frequency domain analysis. The influence of the applied driving force was studied to evaluate the measurement variations in resonant characteristics, such as the natural frequency and the quality factor of the resonator. To quantify the measurement results, measurement system analysis (MSA was performed using the analysis of variance (ANOVA method. The results demonstrate that the resonant frequency ( f r is mostly affected by systematic error. However, the quality (Q factor strongly depends on the applied driving force. To reduce the measurement variations in Q factor, experiments were carried out to study the influence of DC and/or AC driving voltages on the resonator. The results reveal that measurement uncertainties in the quality factor were high for a small electrostatic force.

  16. Calibration of the geometrical characteristics of areal surface topography measuring instruments

    International Nuclear Information System (INIS)

    Giusca, C L; Leach, R K; Helery, F; Gutauskas, T

    2011-01-01

    The use of areal surface topography measuring instruments has increased significantly over the past ten years as industry starts to embrace the use of surface structuring to affect the function of a component. This has led to a range of areal surface topography measuring instruments being developed and becoming available commercially. For such instruments to be used as part of quality control during production, it is essential for them to be calibrated according to international standards. The ISO 25178 suite of specification standards on areal surface topography measurement presents a series of tests that can be used to calibrate the metrological characteristics of an areal surface topography measuring instrument. Calibration artefacts and test procedures have been developed that are compliant with ISO 25178. The material measures include crossed gratings, resolution artefacts and pseudorandom surfaces. Traceability is achieved through the NPL Areal Instrument - a primary stylus-based instrument that uses laser interferometers to measure the displacement of the stylus tip. Good practice guides on areal calibration have also been drafted for stylus instruments, coherence scanning interferometers, scanning confocal microscopes and focus variation instruments.

  17. The characteristics of energy-efficiency measures – a neglected dimension

    International Nuclear Information System (INIS)

    Fleiter, Tobias; Hirzel, Simon; Worrell, Ernst

    2012-01-01

    The diffusion of cost-effective energy-efficiency measures (EEMs) in firms is often surprisingly slow. This phenomenon is usually attributed to a variety of barriers which have been the focus of numerous studies over the last two decades. However, many studies treat EEMs homogenously and assume they have few inherent differences apart from their profitability. We argue that complementing such analyses by considering the characteristics of EEMs in a structured manner can enhance the understanding of EEM adoption. For this purpose, we suggest a classification scheme for EEMs in industry which aims to provide a better understanding of their adoption by industrial firms and to assist in selecting and designing energy-efficiency policies. The suggested classification scheme is derived from the literature on the adoption of EEMs and the related fields including the diffusion of innovations, eco-innovations and advanced manufacturing technology. Our proposed scheme includes 12 characteristics based on the relative advantage, the technical and the information context of the EEM. Applying this classification scheme to six example EEMs demonstrates that it can help to systematically explain why certain EEMs diffuse faster than others. Furthermore, it provides a basis for identifying policies able to increase the rate of adoption. - Highlights: ► The characteristics of energy-efficiency measures critically affect their adoption. ► We propose a classification for energy-efficiency measures in industry. ► It allows to draw conclusions on the adoption likelihood and intensity of barriers. ► As such it provides a basis for policy design and technology analysis.

  18. Measurement of starting characteristics of a remote area Darrieus wind turbine

    Energy Technology Data Exchange (ETDEWEB)

    Freere, P. [Monash University, Clayton (Australia). Dept. of Electrical Engineering; Moller, C.; Jespersen, R. [Danish Technical University, Copenhagen (Denmark). Dept. of Electrical Engineering

    1999-07-01

    A 17 kW Darrieus was constructed as a remote area power supply for an independent community outside Melbourne, Australia. After languishing for several years it was reconditioned, but found not to start at wind speeds up to 12 m/s. Therefore, the turbine was modelled by driving it with an electric motor at various rotational speeds over a range of wind speeds. Thus it was possible to measure the turbine starting characteristics, thereby indicating reasons for the turbine's lack of performance. (author)

  19. The Measurement of Spectral Characteristics and Composition of Radiation in Atlas with MEDIPIX2-USB Devices

    Science.gov (United States)

    Campbell, M.; Doležal, Z.; Greiffenberg, D.; Heijne, E.; Holy, T.; Idárraga, J.; Jakůbek, J.; Král, V.; Králík, M.; Lebel, C.; Leroy, C.; Llopart, X.; Lord, G.; Maneuski, D.; Ouellette, O.; Sochor, V.; Pospíšil, S.; Suk, M.; Tlustos, L.; Vykydal, Z.; Wilhelm, I.

    2008-06-01

    A network of devices to perform real-time measurements of the spectral characteristics and composition of radiation in the ATLAS detector and cavern during its operation is being built. This system of detectors will be a stand alone system fully capable of delivering real-time images of fluxes and spectral composition of different particle species including slow and fast neutrons. The devices are based on MEDIPIX2 pixel silicon detectors that will be operated via active USB cables and USB-Ethernet extenders through an Ethernet network by a PC located in the USA15 ATLAS control room. The installation of 14 devices inside ATLAS (detector and cavern) is in progress.

  20. The Measurement of Spectral Characteristics and Composition of Radiation in ATLAS with MEDIPIX2-USB Devices

    CERN Document Server

    Campbell, M.; Greiffenberg, D.; Heijne, E.; Holy, T.; Idárraga, J.; Jakubek, J.; Král, V.; Králík, M.; Lebel, C.; Leroy, C.; Llopart, X.; Lord, G.; Maneuski, D.; Ouellette, O.; Sochor, V.; Prospísil, S.; Suk, M; Tlustos, L.; Vykydal, Z.; Wilhelm, I.

    2008-01-01

    A network of devices to perform real-time measurements of the spectral characteristics and composition of radiation in the ATLAS detector and cavern during its operation is being built. This system of detectors will be a stand alone system fully capable of delivering real-time images of fluxes and spectral composition of different particle species including slow and fast neutrons. The devices are based on MEDIPIX2 pixel silicon detectors that will be operated via active USB cables and USB-Ethernet extenders through an Ethernet network by a PC located in the USA15 ATLAS control room. The installation of 14 devices inside ATLAS (detector and cavern) is in progress.

  1. Measurement of RF characteristics of magnetic alloys for an RF cavity of the accumulator cooler ring

    International Nuclear Information System (INIS)

    Watanabe, M.; Chiba, Y.; Katayama, T.; Koseki, T.; Ohtomo, K.; Tsutsui, H.

    2004-01-01

    The magnetic alloy (MA)-loaded RF cavity has been studied for an RF stacking system of the accumulator cooler ring (ACR). RF characteristics of several high-permeability MA cores were measured in the frequency range between 1 and 50 MHz. The effects of the cut-core configuration, cutting the core and leaving air gaps between two circular halves, were also investigated. The results show that the shunt impedance remains high and the appropriate inductance and Q-value can be obtained by increasing the gap width of the cut core in the frequency region of the ACR cavity

  2. Proportion and characteristics of patients who measure their blood pressure at home: Nationwide survey in Slovenia

    Directory of Open Access Journals (Sweden)

    Petek-Šter Marija

    2009-01-01

    Full Text Available Introduction. Home blood pressure monitoring has several advantages over blood pressure monitoring at a physician's office, and has become a useful instrument in the management of hypertension. Objective. To explore the rate and characteristics of patients who measure their blood pressure at home. Methods. A sample of 2,752 patients with diagnosis of essential arterial hypertension was selected from 12596 consecutive office visitors. Data of 2,639 patients was appropriate for analysis. The data concerning home blood pressure measurement and patients' characteristics were obtained from the patients' case histories. Results 1,835 (69.5% out of 2,639 patients measured their blood pressure at home. 1,284 (70.0% of home blood pressure patients had their own blood pressure measurement device. There were some important differences between these two groups: home blood pressure patients were more frequently male, of younger age, better educated, from urban area, mostly non-smokers, more likely to have diabetes mellitus and ischemic heart disease and had higher number of co-morbidities and were on other drugs beside antihypertensive medication. Using the logistic regression analysis we found that the most powerful predictors of home blood pressure monitoring had higher education level than primary school OR=1.80 (95% CI 1.37-2.37, non-smoking OR=2.16 (95% CI 1.40-3.33 and having a physician in urban area OR=1.32 (95% CI 1.02-1.71. Conclusion. Home blood pressure monitoring is popular in Slovenia. Patients who measured blood pressure at home were different from patients who did not. Younger age, higher education, non-smoking, having a physician in urban area and longer duration of hypertension were predictors of home blood pressure monitoring.

  3. Characteristics of Ambient Volatile Organic Compounds (VOCs) Measured in Shanghai, China

    Science.gov (United States)

    Cai, Chang-Jie; Geng, Fu-Hai; Tie, Xue-Xi; Yu, Qiong; Peng, Li; Zhou, Guang-Qiang

    2010-01-01

    To better understand the characteristics of ambient abundance of volatile organic compounds (VOCs) in Shanghai, one of the biggest metropolis of China, VOCs were measured with a gas chromatography system equipped with a mass-selective detector (GC/MSD) from July 2006 to February 2010. An intensive measurement campaign was conducted (eight samples per day with a 3 hour interval) during May 2009. The comparison of ambient VOCs collected in different regions of Shanghai shows that the concentrations are slightly higher in the busy commercial area (28.9 ppbv at Xujiaui) than in the urban administrative area (24.3 ppbv at Pudong). However, during the intensive measurement period, the concentrations in the large steel industrial area (28.7 ppbv at Baoshan) were much higher than in the urban administrative area (18 ppbv at Pudong), especially for alkanes, alkenes, and toluene. The seasonal variations of ambient VOC concentrations measured at the Xujiahui sampling site indicate that the VOC concentrations are significantly affected by meteorological conditions (such as wind direction and precipitation). In addition, although alkanes are the most abundant VOCs at the Xujiahui measurement site, the most important VOCs contributing to ozone formation potential (OFP) are aromatics, accounting for 57% of the total OFP. The diurnal variations of VOC concentrations show that VOC concentrations are higher on weekdays than in weekends at the Xujiahui sampling site, suggesting that traffic condition and human activities have important impacts on VOC emissions in Shanghai. The evidence also shows that the major sources of isoprene are mainly resulted from gasoline evaporation at a particular time (06:00–09:00) in the busy commercial area. The results gained from this study provide useful information for better understanding the characteristics of ambient VOCs and the sources of VOCs in Shanghai. PMID:22163629

  4. Characteristics of Ambient Volatile Organic Compounds (VOCs Measured in Shanghai, China

    Directory of Open Access Journals (Sweden)

    Guang-Qiang Zhou

    2010-08-01

    Full Text Available To better understand the characteristics of ambient abundance of volatile organic compounds (VOCs in Shanghai, one of the biggest metropolis of China, VOCs were measured with a gas chromatography system equipped with a mass-selective detector (GC/MSD from July 2006 to February 2010. An intensive measurement campaign was conducted (eight samples per day with a 3 hour interval during May 2009. The comparison of ambient VOCs collected in different regions of Shanghai shows that the concentrations are slightly higher in the busy commercial area (28.9 ppbv at Xujiaui than in the urban administrative area (24.3 ppbv at Pudong. However, during the intensive measurement period, the concentrations in the large steel industrial area (28.7 ppbv at Baoshan were much higher than in the urban administrative area (18 ppbv at Pudong, especially for alkanes, alkenes, and toluene. The seasonal variations of ambient VOC concentrations measured at the Xujiahui sampling site indicate that the VOC concentrations are significantly affected by meteorological conditions (such as wind direction and precipitation. In addition, although alkanes are the most abundant VOCs at the Xujiahui measurement site, the most important VOCs contributing to ozone formation potential (OFP are aromatics, accounting for 57% of the total OFP. The diurnal variations of VOC concentrations show that VOC concentrations are higher on weekdays than in weekends at the Xujiahui sampling site, suggesting that traffic condition and human activities have important impacts on VOC emissions in Shanghai. The evidence also shows that the major sources of isoprene are mainly resulted from gasoline evaporation at a particular time (06:00–09:00 in the busy commercial area. The results gained from this study provide useful information for better understanding the characteristics of ambient VOCs and the sources of VOCs in Shanghai.

  5. Transfer characteristics of optical profilers with respect to rectangular edge and step height measurement

    Science.gov (United States)

    Xie, Weichang; Hagemeier, Sebastian; Bischoff, Jörg; Mastylo, Rostyslav; Manske, Eberhard; Lehmann, Peter

    2017-06-01

    Optical profilers are mature instruments used in research and industry to study surface topography features. Although the corresponding standards are based on simple step height measurements, in practical applications these instruments are often used to study the fidelity of surface topography. In this context it is well-known that in certain situations a surface profile obtained by an optical profiler will differ from the real profile. With respect to practical applications such deviations often occur in the vicinity of steep walls and in cases of high aspect ratio. In this contribution we compare the transfer characteristics of different 3D optical profiler principles, namely white-light interferometry, focus sensing, and confocal microscopy. Experimental results demonstrate that the transfer characteristics do not only depend on the parameters of the optical measurement system (e. g. wavelength and coherence of light, numerical aperture, evaluated signal feature, polarization) but also on the properties of the measuring object such as step height, aspect ratio, material properties and homogeneity, rounding and steepness of the edges, surface roughness. As a result, typical artefacts such as batwings occur for certain parameter combinations, particularly at certain height-to-wavelength ratio (HWR) values. Understanding of the mechanisms behind these phenomena enables to reduce them by an appropriate parameter adaption. However, it is not only the edge artefacts, but also the position of an edge that may be changed due to the properties of the measuring object. In order to investigate the relevant effects theoretically, several models are introduced. These are based on either an extension of Richards-Wolf modeling or rigorous coupled wave analysis (RCWA). Although these models explain the experimental effects quite well they suffer from different limitations, so that a quantitative correspondence of theoretical modeling and experimental results is hard to achieve

  6. Measuring Perceptions of Engagement in Teamwork in Youth Development Programs

    Science.gov (United States)

    Cater, Melissa; Jones, Kimberly Y.

    2014-01-01

    The literature regarding teamwork has supported the idea that the key to improving team performance is to understand team processes. Early work within the realm of teamwork focused on quantifiable measures of team performance, like number of products developed. The measure of a successful team hinged on whether or not the team accomplished the end…

  7. The Calculated and Measured Performance Characteristics of a Heated-Wire Liquid-Water-Content Meter for Measuring Icing Severity

    Science.gov (United States)

    Neel, Carr B.; Steinmetz, Charles P.

    1952-01-01

    Ground tests have been made of an instrument which, when assembled in a more compact form for flight installation, could be used to obtain statistical flight data on the liquid-water content of icing clouds and to provide an indication of icing severity. The sensing element of the instrument consists of an electrically heated wire which is mounted in the air stream. The degree of cooling of the wire resulting from evaporation of the impinging water droplets is a measure. of the liquid-water content of the cloud. Determination of the value of the liquid-water content from the wire temperature at any instant requires a knowledge of the airspeed, altitude, and air temperature. An analysis was made of the temperature response of a heated wire exposed to an air stream containing water drops. Comparisons were made of the liquid-water content as measured with several heated wires and absorbent cylinders in an artificially produced cloud. For one of the wires, comparative tests were made with a rotating-disk icing-rate meter in an icing wind tunnel. From the test results, it was shown that an instrument for measuring the concentration of liquid water in an air stream can be built using an electrically heated wire of known temperatureresistance characteristics, and that the performance of such a device can be predicted using appropriate theory. Although an instrument in a form suitable for gathering statistical data in flight was not built, the practicability of constructing such an instrument was illustrated. The ground-test results indicated that a flight heated-wire instrument would be simple and durable, would respond rapidly to variations in liquid-water content, and could be used for the measurement of water content in clouds which are above freezing temperature, as well as in icing clouds.

  8. Building a Successful Communications Program Based on the Needs and Characteristics of the Affected Communities - 13152

    International Nuclear Information System (INIS)

    Herod, Judy; Mahabir, Alexandra; Holmes, Sandy

    2013-01-01

    Over 200 local residents streamed through the doors of the Port Hope Lions Centre to see the detailed plans for the historic low-level radioactive waste clean-up project about to take place in their community. The event had a congenial atmosphere as people walked through the hall taking in rows of display panels that explained each element of the project, asked questions of project staff stationed around the room and chatted with friends and neighbours over light refreshments. Later that year, the results of the Port Hope Area Initiative (PHAI) 10. annual public attitude survey revealed an all-time high in community awareness of the project (94%) and the highest levels of confidence (84%) recorded since surveying began. Today, as the PHAI transitions from a decade of scientific and technical studies to implementation, the success of its communications program - as evidenced by the above examples - offers room for cautious encouragement. The PHAI has spent the past 10 years developing relationships with the southern Ontario communities of Port Hope and Port Granby in preparation for Canada's largest low-level radioactive waste environmental restoration project. These relationships have been built around a strong understanding of the communities' individual needs and characteristics and on the PHAI's efforts to consider and respond to these needs. The successes of the past, as well as the lessons learned, will inform the next stage of communications as the projects move into waste excavation and transportation and building of the long-term waste management facilities. (authors)

  9. From Knowledge to Action: Tips for Encouraging and Measuring Program-Related Behavior Change

    Science.gov (United States)

    Chazdon, Scott; Horntvedt, Jody; Templin, Elizabeth

    2016-01-01

    It is challenging to document the behavior changes that result from Extension programming. This article describes an evaluation method we call the "action items method." Unlike other approaches for measuring behavior change, this method requires program participants to define their own action plans as part of a program and then asks them…

  10. 75 FR 6673 - Expert Meeting on Measurement Criteria for Children's Health Insurance Program; Reauthorization...

    Science.gov (United States)

    2010-02-10

    ... on Measurement Criteria for Children's Health Insurance Program; Reauthorization Act Pediatric... enacted in the Children's Health Insurance Program Reauthorization Act (CHIPRA). DATES: The meeting will...) reauthorized the Child Health Insurance Program (CHIP) originally established in 1997, and in Title IV of the...

  11. Usage of I++ Simulator to Program Coordinate Measuring Machines when Common Programming Methods are difficult to apply

    Directory of Open Access Journals (Sweden)

    Gąska A.

    2014-02-01

    Full Text Available Nowadays, simulators facilitate tasks performed daily by the engineers of different branches, including coordinate metrologists. Sometimes it is difficult or almost impossible to program a Coordinate Measuring Machine (CMM using standard methods. This happens, for example, during measurements of nano elements or in cases when measurements are performed on high-precision (accurate measuring machines which work in strictly air-conditioned spaces and the presence of the operator in such room during the programming of CMM could cause an increase in temperature, which in turn could make it necessary to wait some time until conditions stabilize. This article describes functioning of a simulator and its usage during Coordinate Measuring Machine programming in the latter situation. Article also describes a general process of programming CMMs which ensures the correct machine performance after starting the program on a real machine. As an example proving the presented considerations, measurement of exemplary workpiece, which was performed on the machine working in the strictly air-conditioned room, was described

  12. Measuring the Effects of Virtual Pair Programming in an Introductory Programming Java Course

    Science.gov (United States)

    Zacharis, N. Z.

    2011-01-01

    This study investigated the effectiveness of virtual pair programming (VPP) on student performance and satisfaction in an introductory Java course. Students used online tools that integrated desktop sharing and real-time communication, and the metrics examined showed that VPP is an acceptable alternative to individual programming experience.…

  13. Our Continuing Program of Optical Color Measurements of Centaurs and KBOs

    Science.gov (United States)

    Romanishin, W.; Tegler, S. C.; Consolmagno, G. J.

    2012-05-01

    We report on our continuing program of BVR color measurement of Centaurs and KBOs. Most of our measurements have been made with the Vatican Advanced Technology Telescope (VATT). We report of new colors obtained through October 2011.

  14. Sustainable Materials Management: U.S. State Data Measurement Sharing Program

    Science.gov (United States)

    The State Data Measurement Sharing Program (SMP) is an online reporting, information sharing, and measurement tool that allows U.S. states to share a wide range of information about waste, recycling, and composting.

  15. Methodology, Measurement and Analysis of Flow Table Update Characteristics in Hardware OpenFlow Switches

    KAUST Repository

    Kuźniar, Maciej

    2018-02-15

    Software-Defined Networking (SDN) and OpenFlow are actively being standardized and deployed. These deployments rely on switches that come from various vendors and differ in terms of performance and available features. Understanding these differences and performance characteristics is essential for ensuring successful and safe deployments.We propose a systematic methodology for SDN switch performance analysis and devise a series of experiments based on this methodology. The methodology relies on sending a stream of rule updates, while relying on both observing the control plane view as reported by the switch and probing the data plane state to determine switch characteristics by comparing these views. We measure, report and explain the performance characteristics of flow table updates in six hardware OpenFlow switches. Our results describing rule update rates can help SDN designers make their controllers efficient. Further, we also highlight differences between the OpenFlow specification and its implementations, that if ignored, pose a serious threat to network security and correctness.

  16. Gait characteristics of individuals with multiple sclerosis before and after a 6-month aerobic training program.

    Science.gov (United States)

    Rodgers, M M; Mulcare, J A; King, D L; Mathews, T; Gupta, S C; Glaser, R M

    1999-07-01

    Individuals who have multiple sclerosis (MS) typically experience problems with physical activities such as walking, resulting from the combined effects of skeletal muscle weakness, sensory disturbances, spasticity, gait ataxia, and reduction in aerobic capacity. The aim of this study was to determine whether a 6-mo exercise program designed for aerobic conditioning might also affect gait abnormalities in individuals with MS. Subjects included 18 individuals with MS who presented a range of disability. Passive range of motion (PROM) in the lower limbs was measured and gait analyzed before and after exercise conditioning. Three-dimensional kinematics, ground reaction forces (GRF), and electromyographic information were acquired as subjects walked at self-selected velocities. Hip PROM increased following conditioning. Mean walking velocity, cadence, and posterior shear GRF (push-off force) decreased. During walking, maximum ankle dorsiflexion decreased and ankle plantarflexion increased. Total knee flexion/extension range during the walking cycle decreased slightly as did maximum hip extension. Results suggest this 6-mo training program had minimal effect on gait abnormalities.

  17. Measurements of isocenter path characteristics of the gantry rotation axis with a smartphone application

    International Nuclear Information System (INIS)

    Schiefer, H.; Peters, S.; Plasswilm, L.; Ingulfsen, N.; Kluckert, J.

    2015-01-01

    Purpose: For stereotactic radiosurgery, the AAPM Report No. 54 [AAPM Task Group 42 (AAPM, 1995)] requires the overall stability of the isocenter (couch, gantry, and collimator) to be within a 1 mm radius. In reality, a rotating system has no rigid axis and thus no isocenter point which is fixed in space. As a consequence, the isocenter concept is reviewed here. It is the aim to develop a measurement method following the revised definitions. Methods: The mechanical isocenter is defined here by the point which rotates on the shortest path in the room coordinate system. The path is labeled as “isocenter path.” Its center of gravity is assumed to be the mechanical isocenter. Following this definition, an image-based and radiation-free measurement method was developed. Multiple marker pairs in a plane perpendicular to the assumed gantry rotation axis of a linear accelerator are imaged with a smartphone application from several rotation angles. Each marker pair represents an independent measuring system. The room coordinates of the isocenter path and the mechanical isocenter are calculated based on the marker coordinates. The presented measurement method is by this means strictly focused on the mechanical isocenter. Results: The measurement result is available virtually immediately following completion of measurement. When 12 independent measurement systems are evaluated, the standard deviations of the isocenter path points and mechanical isocenter coordinates are 0.02 and 0.002 mm, respectively. Conclusions: The measurement is highly accurate, time efficient, and simple to adapt. It is therefore suitable for regular checks of the mechanical isocenter characteristics of the gantry and collimator rotation axis. When the isocenter path is reproducible and its extent is in the range of the needed geometrical accuracy, it should be taken into account in the planning process. This is especially true for stereotactic treatments and radiosurgery

  18. Measurements of isocenter path characteristics of the gantry rotation axis with a smartphone application

    Energy Technology Data Exchange (ETDEWEB)

    Schiefer, H., E-mail: johann.schiefer@kssg.ch; Peters, S.; Plasswilm, L. [Klinik für Radio-Onkologie, Kantonsspital St.Gallen, Rorschacherstrasse 107, St.Gallen CH-9007 (Switzerland); Ingulfsen, N.; Kluckert, J. [Kantonsschule am Burggraben St.Gallen, Burggraben 21, St.Gallen CH-9000 (Switzerland)

    2015-03-15

    Purpose: For stereotactic radiosurgery, the AAPM Report No. 54 [AAPM Task Group 42 (AAPM, 1995)] requires the overall stability of the isocenter (couch, gantry, and collimator) to be within a 1 mm radius. In reality, a rotating system has no rigid axis and thus no isocenter point which is fixed in space. As a consequence, the isocenter concept is reviewed here. It is the aim to develop a measurement method following the revised definitions. Methods: The mechanical isocenter is defined here by the point which rotates on the shortest path in the room coordinate system. The path is labeled as “isocenter path.” Its center of gravity is assumed to be the mechanical isocenter. Following this definition, an image-based and radiation-free measurement method was developed. Multiple marker pairs in a plane perpendicular to the assumed gantry rotation axis of a linear accelerator are imaged with a smartphone application from several rotation angles. Each marker pair represents an independent measuring system. The room coordinates of the isocenter path and the mechanical isocenter are calculated based on the marker coordinates. The presented measurement method is by this means strictly focused on the mechanical isocenter. Results: The measurement result is available virtually immediately following completion of measurement. When 12 independent measurement systems are evaluated, the standard deviations of the isocenter path points and mechanical isocenter coordinates are 0.02 and 0.002 mm, respectively. Conclusions: The measurement is highly accurate, time efficient, and simple to adapt. It is therefore suitable for regular checks of the mechanical isocenter characteristics of the gantry and collimator rotation axis. When the isocenter path is reproducible and its extent is in the range of the needed geometrical accuracy, it should be taken into account in the planning process. This is especially true for stereotactic treatments and radiosurgery.

  19. Patient characteristics associated with measurement of routine diabetes care: an observational study.

    Directory of Open Access Journals (Sweden)

    Arna L Van Doorn-Klomberg

    Full Text Available Non-modifiable patient characteristics, including age, gender, ethnicity as well as the occurrence of multi-morbidities, are associated with processes and outcomes of diabetes care. Information on these factors can be used in case mix adjustment of performance measures. However, the practical relevance of such adjustment is not clear. The aim of this study was to assess the strength of associations between patient factors and diabetes care processes and outcomes.We performed an observational study based on routinely collected data of 12,498 diabetes patients in 59 Dutch primary care practices. Data were collected on patient age, gender, whether the patient lived in a deprived area, body mass index and the co-occurrence of cardiovascular disease, chronic obstructive pulmonary disease, depression or anxiety. Outcomes included 6 dichotomous measures (3 process and 3 outcome related regarding glycosylated hemoglobin, systolic blood pressure and low density lipoprotein-cholesterol. We performed separate hierarchical logistic mixed model regression models for each of the outcome measures.Each of the process measure models showed moderate effect sizes, with pooled areas under the curve that varied between 0.66 and 0.76. The frequency of diabetes related consultations as a measure of patient compliance to treatment showed the strongest association with all process measures (odds ratios between 5.6 and 14.5. The effect sizes of the outcome measure models were considerably smaller than the process measure models, with pooled areas under the curve varying from 0.57 to 0.61.Several non-modifiable patient factors could be associated with processes and outcomes of diabetes care. However, associations were small. These results suggest that case-mix correction or stratification in assessing diabetes care has limited practical relevance.

  20. TRANSFORMED MOTORIC CHARACTERISTICS AFTER RECEIVED PROGRAMMED TRAINING PROCESS ON SUPERIOR KARATE ATHLETES

    Directory of Open Access Journals (Sweden)

    Žarko Kostovski

    2010-03-01

    Full Text Available The research is made on intentional sample of participants, members of Macedonian Karate Representation, in the period of preparing to qualify for the world championship in Tokyo 2008. Within the research, were used 19 (nineteen variables for evaluation the following motorics areas: tests for evaluate muscles strength, explosive strength, movement frequency of lower extremity, rhythmic and coordination. Basic purpose of the research was to establish difference within the variables to evaluate motorics abilities between male karate athletes on the age of 18 to 28 (seniors, after a nine-day programmed training in the period of preparing. Using comparative method the results from the both measures, whereby there were evident numerical improvement in the whole motorist abilities, but no difference in the levels of statistic significances.

  1. Measuring program of the Federal Republic of Germany

    International Nuclear Information System (INIS)

    Heinemann, K.

    1991-10-01

    Form May 21 to June 11 1991 seven measuring vans from the Federal Republic of Germany conducted investigations of radioactivity of environmental samples in the Russian Federation. The measurements were concentrated in the areas of Tula, Kaluga and Brjansk, which were contaminated with different concentrations by the Chernobyl accident. These investigations were financed by the 'Bundesministerium fuer Umwelt, Naturschutz und Reaktorsicherheit' and aimed at the information of the population. In this report, the measuring campaign is described and the results are presented. (orig.) [de

  2. Neutron cross section measurements for the Fast Breeder Program

    International Nuclear Information System (INIS)

    Block, R.C.

    1979-06-01

    This research was concerned with the measurement of neutron cross sections of importance to the Fast Breeder Reactor. The capture and total cross sections of fission products ( 101 102 104 Ru, 143 145 Nd, 149 Sm, 95 97 Mo, Cs, Pr, Pd, 107 Pd, 99 Tc) and tag gases (Kr, 78 80 Kr) were measured up to 100 keV. Filtered neutron beams were used to measure the capture cross section of 238 U (with an Fe filter) and the total cross section of Na (with a Na filter). A radioactive neutron capture detector was developed. A list of publications is included

  3. The influence of governmental mitigation measures on contamination characteristics of PM(2.5) in Beijing.

    Science.gov (United States)

    Chen, Yuan; Schleicher, Nina; Chen, Yizhen; Chai, Fahe; Norra, Stefan

    2014-08-15

    Beijing, the capital of China, has become one of the most air-polluted cities due to its rapid economic growth. Weekly PM2.5 samples-collected continuously from 2007 to 2010-were used to study the contamination characteristics of atmospheric particles and effects of governmental mitigation measures especially since the 2008 Summer Olympic Games. PM2.5 mass concentrations during the sampling period were reduced compared to the previous studies before 2005, although they were still too high in comparison with environmental standards of China and many other countries as well as WHO standards. Results of principle component analysis show that elements of primary anthropogenic origin had an obvious decline while elements mainly from the natural environment kept a relatively stable course. The governmental macro-control measures influenced both anthropogenic and geogenic sources, but they also led to some pollution peaks prior to implementation of the respective measures. Some element concentrations correlated to the restrictiveness of relative measures, especially during different traffic restrictions. The comparison with other countries and international standards shows that there is a long way to go in order to improve air quality in Beijing, and that governmental mitigation measures need to be continued and reinforced. Copyright © 2014 Elsevier B.V. All rights reserved.

  4. A study on the linearity characteristics of neutron power measurement system for Hanaro

    International Nuclear Information System (INIS)

    Kang, Tai Ki; Kim, Young Ki; Lee, Byung Chul; Park, Sang Jun

    1999-06-01

    It is briefly described the general principles of neutron detection and the method of neutron measurement in the nuclear reactor which neutron flux varies widely and gamma radiation also exists. Wide-range Fission Chamber System which is excellent in electrical and mechanical performances has been selected for neutron power measurement system for Hanaro. The linearity characteristics of neutron power signals is a critical factor of the reliability in reactor power control. In particular , the linearity of the log power signal, which covers 10 decade form 10 -8 %FP to 200 %FP was a matter of primary concern during commissioning. In case of the linear power signal for reactor control at high power condition, the output signals were additionally analyzed in connection with the reactor thermal power and the delayed neutron signal from the primary pipe as well as the output signal from the compensated ion chamber as a reference signal. (author). 13 refs., 7 tabs., 33 figs

  5. A study on the linearity characteristics of neutron power measurement system for Hanaro

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Tai Ki; Kim, Young Ki; Lee, Byung Chul; Park, Sang Jun

    1999-06-01

    It is briefly described the general principles of neutron detection and the method of neutron measurement in the nuclear reactor which neutron flux varies widely and gamma radiation also exists. Wide-range Fission Chamber System which is excellent in electrical and mechanical performances has been selected for neutron power measurement system for Hanaro. The linearity characteristics of neutron power signals is a critical factor of the reliability in reactor power control. In particular , the linearity of the log power signal, which covers 10 decade form 10 {sup -8} %FP to 200 %FP was a matter of primary concern during commissioning. In case of the linear power signal for reactor control at high power condition, the output signals were additionally analyzed in connection with the reactor thermal power and the delayed neutron signal from the primary pipe as well asthe output signal from the compensated ion chamber as a reference signal. (author). 13 refs., 7 tabs., 33 figs.

  6. Using pressure square-like wave to measure the dynamic characteristics of piezoelectric pressure sensor

    International Nuclear Information System (INIS)

    Han, L-L; Tsung, T-T; Chen, L-C; Chang Ho; Jwo, C-S

    2005-01-01

    Piezoelectric pressure sensors are commonly used to measuring the dynamic characteristics in a hydraulic system. The dynamic measurements require a pressure sensor which has a high response rate. In this paper, we proposed use of a pressure square wave to excite the piezoelectric pressure sensor. Experimental frequencies are 0.5, 1.0, 1.5, and 2.0 kHz at 10, 15, 20 bar, respectively. Results show that the waveform of time-domain and frequencydomain response are quite different under above testing conditions. The higher the frequencies tested, the faster the pressure-rise speeds obtained. Similarly, the higher the testing pressure, the shorter the rise time attained

  7. FMCSA safety program effectiveness measurement: intervention model fiscal year 2009.

    Science.gov (United States)

    2013-04-01

    The Federal Motor Carrier Safety Administration (FMCSA), in cooperation with the researcher, has developed an analytic model to measure the effectiveness of roadside inspections and traffic enforcements in terms of crashes avoided, injuries avoided, ...

  8. Organizational characteristics, financial performance measures, and funding sources of faith based organizations.

    Science.gov (United States)

    Lampkin, Lynne; Raghavan, Kamala

    2008-01-01

    This study examined the impact of organizational characteristics and financial performance measures of faith based organizations (FBOS) in Pennsylvania and Ohio on the decisions of the funding sources. Organizational characteristics of size, age, and type of service, and financial performance measures such as expense, liquidity, and solvency ratios were gathered from the data on IRS form 990 for 97 FBOS for the period of 1995 to 2004. The study found that the 1996 Charitable Choice provisions and the 2001 Office of Faith-Based and Community Initiatives have led to increased government funding for FBOS. The results showed that government funding of FBOS is affected positively by age of the FBO, and negatively by its size. For smaller FBOS, savings ratio had a negative relationship to government funding and a positive relationship to direct public support. For social service FBOS government funding was positively affected by age and negatively affected by size and debt ratio, while days-cash-on-hand had a negative impact on direct public support. All of the above relationships were statistically significant.

  9. Implications of Variation in the Relationships between Beneficiary Characteristics and Medicare Advantage CAHPS Measures.

    Science.gov (United States)

    Hatfield, Laura A; Zaslavsky, Alan M

    2017-08-01

    To study how differences in quality score adjustments across Medicare Advantage contracts change comparisons for individuals and contracts. Responses to the Medicare Advantage implementation of the Consumer Assessments of Healthcare Providers and Systems (CAHPS) survey from 2010 to 2014. We fit national-and state-level hierarchical models to predict CAHPS scores for individuals and contracts, adjusted for self-reported education, general health, and mental health. We allow the effects of these variables on quality measures to vary across contracts with a hierarchical model. We perform secondary data analysis. For average consumers, standard adjustment is sufficient to represent variation in contract quality standardized to a common population. For people with characteristics far from average, personalized reporting using their characteristics and contract-specific coefficients can substantially change the expected quality measures across contracts. This effect is stronger when comparing among contracts within a state than across all contracts. Customized reporting may help consumers select the best Medicare Advantage plan, but policies should protect against unintended consequences. © Health Research and Educational Trust.

  10. A Study Examining the Dimensionality of Core Competencies Measure in Teacher Preparation Programs: Challenges and Lessons

    Science.gov (United States)

    Kizil, Ruhan Circi; Briggs, Derek; Seidel, Kent; Green, Kathy

    2014-01-01

    The evidence that teacher preparation programs have an impact on teacher quality is often limited. Progress in research on this topic will remain rather limited in its influence on practice until more proximal measures of teacher education outcomes can be established. The dearth of variables to measure the impact of teacher preparation programs on…

  11. A program for monitor unit calculation for high energy photon beams in isocentric condition based on measured data

    International Nuclear Information System (INIS)

    Gesheva-Atanasova, N.

    2008-01-01

    The aim of this study is: 1) to propose a procedure and a program for monitor unit calculation for radiation therapy with high energy photon beams, based on data measured by author; 2) to compare this data with published one and 3) to evaluate the precision of the monitor unit calculation program. From this study it could be concluded that, we reproduced with a good agreement the published data, except the TPR values for dept up to 5 cm. The measured relative weight of upper and lower jaws - parameter A was dramatically different from the published data, but perfectly described the collimator exchange effect for our treatment machine. No difference was found between the head scatter ratios, measured in a mini phantom and those measured with a proper brass buildup cap. Our monitor unit calculation program was found to be reliable and it can be applied for check up of the patient's plans for irradiation with high energy photon beams and for some fast calculations. Because of the identity in the construction, design and characteristics of the Siemens accelerators, and the agreement with the published data for the same beam qualities, we hope that most of our experimental data and this program can be used after verification in other hospitals

  12. The baseline characteristics of parents and African American girls in an online obesity prevention program: A feasibility study

    Science.gov (United States)

    The objective of this paper was to identify the relationships and associations between child and parent characteristics with child fruit and vegetable (FV) consumption in an online obesity prevention program for 8-10 year old African American girls. Girls and a parent (n=342 child-parent pairs) in t...

  13. Adolescent bariatric surgery program characteristics: the Teen Longitudinal Assessment of Bariatric Surgery (Teen-LABS) study experience.

    Science.gov (United States)

    Michalsky, Marc P; Inge, Thomas H; Teich, Steven; Eneli, Ihuoma; Miller, Rosemary; Brandt, Mary L; Helmrath, Michael; Harmon, Carroll M; Zeller, Meg H; Jenkins, Todd M; Courcoulas, Anita; Buncher, Ralph C

    2014-02-01

    The number of adolescents undergoing weight loss surgery (WLS) has increased in response to the increasing prevalence of severe childhood obesity. Adolescents undergoing WLS require unique support, which may differ from adult programs. The aim of this study was to describe institutional and programmatic characteristics of centers participating in Teen Longitudinal Assessment of Bariatric Surgery (Teen-LABS), a prospective study investigating safety and efficacy of adolescent WLS. Data were obtained from the Teen-LABS database, and site survey completed by Teen-LABS investigators. The survey queried (1) institutional characteristics, (2) multidisciplinary team composition, (3) clinical program characteristics, and (4) clinical research infrastructure. All centers had extensive multidisciplinary involvement in the assessment, pre-operative education, and post-operative management of adolescents undergoing WLS. Eligibility criteria and pre-operative clinical and diagnostic evaluations were similar between programs. All programs have well-developed clinical research infrastructure, use adolescent-specific educational resources, and maintain specialty equipment, including high weight capacity diagnostic imaging equipment. The composition of clinical team and institutional resources is consistent with current clinical practice guidelines. These characteristics, coupled with dedicated research staff, have facilitated enrollment of 242 participants into Teen-LABS. © 2013 Published by Elsevier Inc.

  14. Measurement of electrodynamics characteristics of higher order modes for harmonic cavity at 2400 MHz

    Science.gov (United States)

    Shashkov, Ya V.; Sobenin, N. P.; Gusarova, M. A.; Lalayan, M. V.; Bazyl, D. S.; Donetskiy, R. V.; Orlov, A. I.; Zobov, M. M.; Zavadtsev, A. A.

    2016-09-01

    In the frameworks of the High Luminosity Large Hadron Collider (HL-LHC) upgrade program an application of additional superconducting harmonic cavities operating at 800 MHz is currently under discussion. As a possible candidate, an assembly of two cavities with grooved beam pipes connected by a drift tube and housed in a common cryomodule, was proposed. In this article we discuss measurements of loaded Q-factors of higher order modes (HOM) performed on a scaled aluminium single cell cavity prototype with the fundamental frequency of 2400 MHz and on an array of two such cavities connected by a narrow beam pipe. The measurements were performed for the system with and without the matching load in the drift tube..

  15. Field measurement program to determine far field plume dilution parameters

    International Nuclear Information System (INIS)

    Orth, R.C.; Carter, H.H.; Miyasaki, M.T.

    1974-01-01

    A description of the techniques used to obtain measurements of temperature, salinity, tidal velocity and tracer concentration required to determine the far field dilution in a shallow estuary is presented. The study was done to characterize the physical hydrography of the Bush River, a tributary estuary of the Chesapeake Bay, which is a possible recipient of the thermal discharge from a proposed power plant consisting of two 850 MWe nuclear generating units. Measurements of temperature and salinity along the axis of the estuary during periods of high and low fresh water inflow were obtained for use in the development of a one-dimensional-segmented transient state model of the estuary. Computer concentrations from the model compared favorably with measured dye concentrations for the same periods of high and low freshwater inflow

  16. Measuring program of the Federal Republic of Germany

    International Nuclear Information System (INIS)

    Heinemann, K.; Hille, R.

    1993-05-01

    21 scientists and engineers conducted environmental measurement and determined the contamination of soil and foodstuff. Samples of food of the population were measured received and the results were given in a certificate with short explanation in the native language. In 3 appendices of this report all results are given in detail. They are discussed in the way of local mean values. In regard to one year earlier the external dosis and the soil contaminations are nearly constant. But the milk contaminations decreased significantly. (orig.) [de

  17. Recent results from the MISTRAL mass measurement program at ISOLDE

    CERN Document Server

    Lunney, M D; Audi, G; Bollen, G; Borcea, C; Doubre, H; Gaulard, C; Henry, S; De Saint-Simon, M; Thibault, C; Toader, C F; Vieira, N

    2001-01-01

    The MISTRAL experiment (Mass measurements at ISOLDE with a Transmission and Radiofrequency spectrometer on-Line), conceived for very short-lived nuclides, has reached the end of its commissioning phase. Installed in 1997, results have been obtained consistent with all aspects of the projected spectrometer performance: nuclides with half-lives as short as 30 ms have been measured and accuracies of $\\pm$0.4 have been achieved, despite the presence of a systematic shift and difficulties with isobaric contamination. Masses of several nuclides, including $^{25-26}\\!$Ne and $^{32}$Mg that forms the famous island of inversion around N=20, have been significantly improved.

  18. Atmospheric radiation measurement: A program for improving radiative forcing and feedback in general circulation models

    International Nuclear Information System (INIS)

    Patrinos, A.A.; Renne, D.S.; Stokes, G.M.; Ellingson, R.G.

    1991-01-01

    The Atmospheric Radiation Measurement (ARM) Program is a key element of the Department of Energy's (DOE's) global change research strategy. ARM represents a long-term commitment to conduct comprehensive studies of the spectral atmospheric radiative energy balance profile for a wide range of cloud conditions and surface types, and to develop the knowledge necessary to improve parameterizations of radiative processes under various cloud regimes for use in general circulation models (GCMs) and related models. The importance of the ARM program is a apparent from the results of model assessments of the impact on global climate change. Recent studies suggest that radiatively active trace gas emissions caused by human activity can lead to a global warming of 1.5 to 4.5 degrees Celsius and to important changes in water availability during the next century (Cess, et al. 1989). These broad-scale changes can be even more significant at regional levels, where large shifts in temperature and precipitation patterns are shown to occur. However, these analyses also indicate that considerable uncertainty exists in these estimates, with the manner in which cloud radiative processes are parameterized among the most significant uncertainty. Thus, although the findings have significant policy implications in assessment of global and regional climate change, their uncertainties greatly influence the policy debate. ARM's highly focused observational and analytical research is intended to accelerate improvements and reduce key uncertainties associated with the way in which GCMs treat cloud cover and cloud characteristics and the resulting radiative forcing. This paper summarizes the scientific context for ARM, ARM's experimental approach, and recent activities within the ARM program

  19. Measurement and calculation of characteristic prompt gamma ray spectra emitted during proton irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Polf, J C; Peterson, S; Beddar, S [M D Anderson Cancer Center, Univeristy of Texas, Houston, TX 77030 (United States); McCleskey, M; Roeder, B T; Spiridon, A; Trache, L [Cyclotron Institute, Texas A and M University, College Station, TX 77843 (United States)], E-mail: jcpolf@mdanderson.org

    2009-11-21

    In this paper, we present results of initial measurements and calculations of prompt gamma ray spectra (produced by proton-nucleus interactions) emitted from tissue equivalent phantoms during irradiations with proton beams. Measurements of prompt gamma ray spectra were made using a high-purity germanium detector shielded either with lead (passive shielding), or a Compton suppression system (active shielding). Calculations of the spectra were performed using a model of both the passive and active shielding experimental setups developed using the Geant4 Monte Carlo toolkit. From the measured spectra it was shown that it is possible to distinguish the characteristic emission lines from the major elemental constituent atoms (C, O, Ca) in the irradiated phantoms during delivery of proton doses similar to those delivered during patient treatment. Also, the Monte Carlo spectra were found to be in very good agreement with the measured spectra providing an initial validation of our model for use in further studies of prompt gamma ray emission during proton therapy. (note)

  20. Ultrafine particle emission characteristics of diesel engine by on-board and test bench measurement.

    Science.gov (United States)

    Huang, Cheng; Lou, Diming; Hu, Zhiyuan; Tan, Piqiang; Yao, Di; Hu, Wei; Li, Peng; Ren, Jin; Chen, Changhong

    2012-01-01

    This study investigated the emission characteristics of ultrafine particles based on test bench and on-board measurements. The bench test results showed the ultrafine particle number concentration of the diesel engine to be in the range of (0.56-8.35) x 10(8) cm(-3). The on-board measurement results illustrated that the ultrafine particles were strongly correlated with changes in real-world driving cycles. The particle number concentration was down to 2.0 x 10(6) cm(-3) and 2.7 x 10(7) cm(-3) under decelerating and idling operations and as high as 5.0 x 10(8) cm(-3) under accelerating operation. It was also indicated that the particle number measured by the two methods increased with the growth of engine load at each engine speed in both cases. The particle number presented a "U" shaped distribution with changing speed at high engine load conditions, which implies that the particle number will reach its lowest level at medium engine speeds. The particle sizes of both measurements showed single mode distributions. The peak of particle size was located at about 50-80 nm in the accumulation mode particle range. Nucleation mode particles will significantly increase at low engine load operations like idling and decelerating caused by the high concentration of unburned organic compounds.

  1. Simulation and Measurement of Neuroelectrodes' Characteristics with Integrated High Aspect Ratio Nano Structures

    Directory of Open Access Journals (Sweden)

    Christoph Nick

    2015-07-01

    Full Text Available Improving the interface between electrodes and neurons has been the focus of research for the last decade. Neuroelectrodes should show small geometrical surface area and low impedance for measuring and high charge injection capacities for stimulation. Increasing the electrochemically active surface area by using nanoporous electrode material or by integrating nanostructures onto planar electrodes is a common approach to improve this interface. In this paper a simulation approach for neuro electrodes' characteristics with integrated high aspect ratio nano structures based on a point-contact-model is presented. The results are compared with experimental findings conducted with real nanostructured microelectrodes. In particular, effects of carbon nanotubes and gold nanowires integrated onto microelectrodes are described. Simulated and measured impedance properties are presented and its effects onto the transfer function between the neural membrane potential and the amplifier output signal are studied based on the point-contact-model. Simulations show, in good agreement with experimental results, that electrode impedances can be dramatically reduced by the integration of high aspect ratio nanostructures such as gold nanowires and carbon nanotubes. This lowers thermal noise and improves the signal-to-noise ratio for measuring electrodes. It also may increase the adhesion of cells to the substrate and thus increase measurable signal amplitudes.

  2. Atmospheric radiation measurement program facilities newsletter, June 2002.; TOPICAL

    International Nuclear Information System (INIS)

    Holdridge, D. J.

    2002-01-01

    ARM Intensive Operational Period Scheduled to Validate New NASA Satellite-Beginning in July, all three ARM sites (Southern Great Plains[SGP], North Slope of Alaska, and Tropical Western Pacific; Figure 1) will participate in the AIRS Validation IOP. This three-month intensive operational period (IOP) will validate data collected by the satellite-based Atmospheric Infrared Sounder (AIRS) recently launched into space. On May 4, the National Aeronautics and Space Administration (NASA) launched Aqua, the second spacecraft in the Earth Observing System (EOS) series. The EOS satellites monitor Earth systems including land surfaces, oceans, the atmosphere, and ice cover. The first EOS satellite, named Terra, was launched in December 1999. The second EOS satellite is named Aqua because its primary focus is understanding Earth's water cycle through observation of atmospheric moisture, clouds, temperature, ocean surface, precipitation, and soil moisture. One of the instruments aboard Aqua is the AIRS, built by the Jet Propulsion Laboratory, a NASA agency. The AIRS Validation IOP complements the ARM mission to improve understanding of the interactions of clouds and atmospheric moisture with solar radiation and their influence on weather and climate. In support of satellite validation IOP, ARM will launch dedicated radiosondes at all three ARM sites while the Aqua satellite with the AIRS instrument is orbiting overhead. These radiosonde launches will occur 45 minutes and 5 minutes before selected satellite overpasses. In addition, visiting scientists from the Jet Propulsion Laboratory will launch special radiosondes to measure ozone and humidity over the SGP site. All launches will generate ground-truth data to validate satellite data collected simultaneously. Data gathered daily by ARM meteorological and solar radiation instruments will complete the validation data sets. Data from Aqua-based instruments, including AIRS, will aid in weather forecasting, climate modeling, and

  3. Measuring the Effectiveness of the Industrial Modernization Incentives Program (IMIP).

    Science.gov (United States)

    1985-09-01

    nebulous to accurately measure. It is of interest to note that if "degree of improved readiness" could be defined and quantified, 100 percent of the...Make the Turtle Run?" Government Executive, Vol 14: 18-21 (October 1982). 19. Kluter, Major Eugene E., USAF. Producing More For Less: A Guide For

  4. USCEA/NIST measurement assurance programs for the radiopharmaceutical and nuclear power industries

    Energy Technology Data Exchange (ETDEWEB)

    Golas, D.B. [Council for Energy Awareness, Washington, DC (United States)

    1993-12-31

    In cooperation with the U.S. Council for Energy Awareness (USCEA), the National Institute of Standards and Technology (NIST) supervises and administers two measurement assurance programs for radioactivity measurement traceability. One, in existence since the mid 1970s, provides traceability to suppliers of radiochemicals and radiopharmaceuticals, dose calibrators, and nuclear pharmacy services. The second program, begun in 1987, provides traceability to the nuclear power industry for utilities, source suppliers, and service laboratories. Each program is described, and the results of measurements of samples of known, but undisclosed activity, prepared at NIST and measured by the participants are presented.

  5. USCEA/NIST measurement assurance programs for the radiopharmaceutical and nuclear power industries

    International Nuclear Information System (INIS)

    Golas, D.B.

    1993-01-01

    In cooperation with the U.S. Council for Energy Awareness (USCEA), the National Institute of Standards and Technology (NIST) supervises and administers two measurement assurance programs for radioactivity measurement traceability. One, in existence since the mid 1970s, provides traceability to suppliers of radiochemicals and radiopharmaceuticals, dose calibrators, and nuclear pharmacy services. The second program, begun in 1987, provides traceability to the nuclear power industry for utilities, source suppliers, and service laboratories. Each program is described, and the results of measurements of samples of known, but undisclosed activity, prepared at NIST and measured by the participants are presented

  6. Measured and perceived environmental characteristics are related to accelerometer defined physical activity in older adults

    Directory of Open Access Journals (Sweden)

    Strath Scott J

    2012-04-01

    Full Text Available Abstract Background Few studies have investigated both the self-perceived and measured environment with objectively determined physical activity in older adults. Accordingly, the aim of this study was to examine measured and perceived environmental associations with physical activity of older adults residing across different neighborhood types. Methods One-hundred and forty-eight older individuals, mean age 64.3 ± 8.4, were randomly recruited from one of four neighborhoods that were pre-determined as either having high- or low walkable characteristics. Individual residences were geocoded and 200 m network buffers established. Both objective environment audit, and self-perceived environmental measures were collected, in conjunction with accelerometer derived physical activity behavior. Using both perceived and objective environment data, analysis consisted of a macro-level comparison of physical activity levels across neighborhood, and a micro-level analysis of individual environmental predictors of physical activity levels. Results Individuals residing in high-walkable neighborhoods on average engaged in 11 min of moderate to vigorous physical activity per day more than individuals residing in low-walkable neighborhoods. Both measured access to non-residential destinations (b = .11, p p = .031 were significant predictors of time spent in moderate to vigorous physical activity. Other environmental variables significantly predicting components of physical activity behavior included presence of measured neighborhood crime signage (b = .4785, p = .031, measured street safety (b = 26.8, p = .006, and perceived neighborhood satisfaction (b = .5.8, p = .003. Conclusions Older adult residents who live in high-walkable neighborhoods, who have easy and close access to nonresidential destinations, have lower social dysfunction pertinent to crime, and generally perceive the neighborhood to a higher overall satisfaction are likely to engage in higher levels

  7. Atmospheric radiation measurement program facilities newsletter, April 2001.; TOPICAL

    International Nuclear Information System (INIS)

    Holdridge, D. J.

    2001-01-01

    Intensive Observation Period Projects Scheduled-Several IOP projects have been scheduled for the SGP CART site this spring. These projects either have already begun or will begin shortly. Radiosondes-The RS-90 Transition IOP is currently under way. The RS-90 model radiosonde is gradually replacing the older RS-80 model. Radiosondes are instrument packages attached to and launched by weather balloons. The instruments measure atmospheric pressure, temperature, and relative humidity as the balloon rises through the air. The new RS-90 model is a high-performance radiosonde with fast-response sensors capable of providing data for each variable every second. The relatively environmentally friendly package is constructed of cardboard and steel rather than Styrofoam, and it has a water-activated battery that contains no toxic substances. The RS-90 Transition IOP is taking place during April. Operators will launch both the old RS-80 and the new RS-90 radiosondes simultaneously once each day to obtain duplicate vertical profiles of the atmosphere for comparison. This procedure will also allow data users to test the output from the old and new radiosondes in models. Narrow Field of View (NFOV) Solar Spectrometer Cloud Optical Depth Retrieval Campaign-The NFOV IOP is scheduled to take place on May 7-August 31, 2001. A researcher from Pennsylvania State University will be deploying a dual-spectrometer instrument that measures the hemispheric flux and zenith NFOV radiance over a wavelength range of 300- 1000 nanometers. (One nanometer equals 1 billionth of a meter or 0.000000039 inches.) This wavelength range includes the ultraviolet, visible, and near-infrared spectra. These measurements are used to estimate cloud optical depth-a quantity related to the amount of solar radiation intercepted by a cloud-for broken cloud fields over vegetated surfaces. The IOP measurements will be compared with optical depth measurements made by SGP instruments. Precision Gas Sampling (PGS

  8. Measurement of two-dimensional thermal neutron flux in a water phantom and evaluation of dose distribution characteristics

    International Nuclear Information System (INIS)

    Yamamoto, Kazuyoshi; Kumada, Hiroaki; Kishi, Toshiaki; Torii, Yoshiya; Horiguchi, Yoji

    2001-03-01

    To evaluate nitrogen dose, boron dose and gamma-ray dose occurred by neutron capture reaction of the hydrogen at the medical irradiation, two-dimensional distribution of the thermal neutron flux is very important because these doses are proportional to the thermal neutron distribution. This report describes the measurement of the two-dimensional thermal neutron distribution in a head water phantom by neutron beams of the JRR-4 and evaluation of the dose distribution characteristic. Thermal neutron flux in the phantom was measured by gold wire placed in the spokewise of every 30 degrees in order to avoid the interaction. Distribution of the thermal neutron flux was also calculated using two-dimensional Lagrange's interpolation program (radius, angle direction) developed this time. As a result of the analysis, it was confirmed to become distorted distribution which has annular peak at outside of the void, though improved dose profile of the deep direction was confirmed in the case which the radiation field in the phantom contains void. (author)

  9. Inspiring science achievement: a mixed methods examination of the practices and characteristics of successful science programs in diverse high schools

    Science.gov (United States)

    Scogin, Stephen C.; Cavlazoglu, Baki; LeBlanc, Jennifer; Stuessy, Carol L.

    2017-08-01

    While the achievement gap in science exists in the US, research associated with our investigation reveals some high school science programs serving diverse student bodies are successfully closing the gap. Using a mixed methods approach, we identified and investigated ten high schools in a large Southwestern state that fit the definition of "highly successful, highly diverse". By conducting interviews with science liaisons associated with each school and reviewing the literature, we developed a rubric identifying specific characteristics associated with successful science programs. These characteristics and practices included setting high expectations for students, providing extensive teacher support for student learning, and utilizing student-centered pedagogy. We used the rubric to assess the successful high school science programs and compare them to other high school science programs in the state (i.e., less successful and less diverse high school science programs). Highly successful, highly diverse schools were very different in their approach to science education when compared to the other programs. The findings from this study will help schools with diverse students to strengthen hiring practices, enhance teacher support mechanisms, and develop student-focused strategies in the classroom that increase science achievement.

  10. The BEAR program NRL plasma physics instrumentation measurements

    Energy Technology Data Exchange (ETDEWEB)

    Walker, D.N.; Baumback, M.M.; Haas, D.G.; Rodriguez, P.; Siefring, C.L.; Doggett, R.A. [Naval Research Lab., Washington, DC (United States)

    1989-11-15

    The BEAR program was a joint effort to launch, and demonstrate the feasibility of operating, a 1 MeV 10 ma Neutral Particle Beam (NPB) accelerator from a space platform. The accelerator design and manufacture were the responsibility of Los Alamos National Lab (LANL); diagnostics associated with accelerator operation and beam-plasma effects were also to be undertaken by LANL and NRL. Payload Integration and Telemetry was provided by the Air Force Geophysical Lab (AFGL) and Northeastern University (NEU). Beam effects on the local plasma in addition to accelerator produced vehicle effects (e.g., charging) were the responsibility of NRL as outlined herein. The BEAR rocket was launched successfully during the early morning hours of July 13 from White Sands Missile Range, White Sands, N.M. The NRL contribution to this effort included three instrument packages designed to diagnose beam-plasma and vehicle-plasma interactions. The instruments included: (1) Langmuir probe (LP) design consisting of 4 separate sensors; (2) High voltage (HIV) Langmuir Probe designed to monitor vehicle charging through current polarity changes; and (3) Plasma Wave Receive (PWR) designed to characterize the plasma wave emissions covering a broad frequency range from near DC to 50 MHz.

  11. Development of a Computer Program for the Integrated Control of the Fuel Homogeneity Measurement System

    International Nuclear Information System (INIS)

    Shin, H. S.; Jang, J. W.; Lee, Y. H.; Oh, S. J.; Park, H. D.; Kim, C. K.

    2005-11-01

    The computer program is developed based on Visual C++, which is equipped with a user-friendly interface of the input/output(I/O) and a display function for the measuring conditions. This program consists of three parts which are the port communication, PLC(Programmable Logic Controller) and the MCA(Multi Channel Analyzer) control parts. The communication type between the CPU of the PLC module box and the computer is selected as be the Rs-232 asynchronous type and the thread method is adapted in the development of the first part of the program. The PLC-related program has been developed so that the data communication between the PLC CPU and the computer could be harmonized with the unique commands which have already been defined in the PLC. The measuring space and time intervals, the start and end ROI(region of interest) values, and the allowable error limitation are input at each measurement in this program. Finally the controlling MCA program has been developed by using Canberra's programming library which contains several files including the head files in which the variable and the function of C++ are declared according to the MCA function. The performance test has been carried out through an application of the developed computer program to the homogeneity measurement system. The gamma counts at 28 measuring points of a fuel rod of 700 mm in length are measured for 50 sec at each point. It was revealed that the measurement results are better than the previous ones in respects of the measurement accuracy and a measurement time saving could be achieved. It was concluded that the gamma measurement system can be improved through equipping it with the developed control program

  12. Associations Between Physician Empathy, Physician Characteristics, and Standardized Measures of Patient Experience.

    Science.gov (United States)

    Chaitoff, Alexander; Sun, Bob; Windover, Amy; Bokar, Daniel; Featherall, Joseph; Rothberg, Michael B; Misra-Hebert, Anita D

    2017-10-01

    To identify correlates of physician empathy and determine whether physician empathy is related to standardized measures of patient experience. Demographic, professional, and empathy data were collected during 2013-2015 from Cleveland Clinic Health System physicians prior to participation in mandatory communication skills training. Empathy was assessed using the Jefferson Scale of Empathy. Data were also collected for seven measures (six provider communication items and overall provider rating) from the visit-specific and 12-month Consumer Assessment of Healthcare Providers and Systems Clinician and Group (CG-CAHPS) surveys. Associations between empathy and provider characteristics were assessed by linear regression, ANOVA, or a nonparametric equivalent. Significant predictors were included in a multivariable linear regression model. Correlations between empathy and CG-CAHPS scores were assessed using Spearman rank correlation coefficients. In bivariable analysis (n = 847 physicians), female sex (P empathy scores. In multivariable analysis, female sex (P empathy scores. Of the seven CG-CAHPS measures, scores on five for the 583 physicians with visit-specific data and on three for the 277 physicians with 12-month data were positively correlated with empathy. Specialty and sex were independently associated with physician empathy. Empathy was correlated with higher scores on multiple CG-CAHPS items, suggesting improving physician empathy might play a role in improving patient experience.

  13. Study on Thermal Degradation Characteristics and Regression Rate Measurement of Paraffin-Based Fuel

    Directory of Open Access Journals (Sweden)

    Songqi Hu

    2015-09-01

    Full Text Available Paraffin fuel has been found to have a regression rate that is higher than conventional HTPB (hydroxyl-terminated polybutadiene fuel and, thus, presents itself as an ideal energy source for a hybrid rocket engine. The energy characteristics of paraffin-based fuel and HTPB fuel have been calculated by the method of minimum free energy. The thermal degradation characteristics were measured for paraffin, pretreated paraffin, HTPB and paraffin-based fuel in different working conditions by the using differential scanning calorimetry (DSC and a thermogravimetric analyzer (TGA. The regression rates of paraffin-based fuel and HTPB fuel were tested by a rectangular solid-gas hybrid engine. The research findings showed that: the specific impulse of paraffin-based fuel is almost the same as that of HTPB fuel; the decomposition temperature of pretreated paraffin is higher than that of the unprocessed paraffin, but lower than that of HTPB; with the increase of paraffin, the initial reaction exothermic peak of paraffin-based fuel is reached in advance, and the initial reaction heat release also increases; the regression rate of paraffin-based fuel is higher than the common HTPB fuel under the same conditions; with the increase of oxidizer mass flow rate, the regression rate of solid fuel increases accordingly for the same fuel formulation.

  14. High temporal resolution in situ measurement of the effective particle size characteristics of fluvial suspended sediment.

    Science.gov (United States)

    Williams, N D; Walling, D E; Leeks, G J L

    2007-03-01

    This paper reports the use of a LISST-100 device to monitor the effective particle size characteristics of suspended sediment in situ, and at a quasi-continuous temporal resolution. The study site was located on the River Exe at Thorverton, Devon, UK. This device has not previously been utilized in studies of fluvial suspended sediment at the storm event scale, and existing studies of suspended sediment dynamics have not involved such a high temporal resolution for extended periods. An evaluation of the field performance of the instrument is presented, with respect to innovative data collection and analysis techniques. It was found that trends in the effective particle size distribution (EPSD) and degree of flocculation of suspended sediment at the study site were highly complex, and showed significant short-term variability that has not previously been documented in the fluvial environment. The collection of detailed records of EPSD facilitated interpretation of the dynamic evolution of the size characteristics of suspended sediment, in relation to its likely source and delivery and flocculation mechanisms. The influence of measurement frequency is considered in terms of its implications for future studies of the particle size of fluvial suspended sediment employing in situ data acquisition.

  15. Pragmatic characteristics of patient-reported outcome measures are important for use in clinical practice.

    Science.gov (United States)

    Kroenke, Kurt; Monahan, Patrick O; Kean, Jacob

    2015-09-01

    Measures for assessing patient-reported outcomes (PROs) that may have initially been developed for research are increasingly being recommended for use in clinical practice as well. Although psychometric rigor is essential, this article focuses on pragmatic characteristics of PROs that may enhance uptake into clinical practice. Three sources were drawn on in identifying pragmatic criteria for PROs: (1) selected literature review including recommendations by other expert groups; (2) key features of several model public domain PROs; and (3) the authors' experience in developing practical PROs. Eight characteristics of a practical PRO include: (1) actionability (i.e., scores guide diagnostic or therapeutic actions/decision making); (2) appropriateness for the relevant clinical setting; (3) universality (i.e., for screening, severity assessment, and monitoring across multiple conditions); (4) self-administration; (5) item features (number of items and bundling issues); (6) response options (option number and dimensions, uniform vs. varying options, time frame, intervals between options); (7) scoring (simplicity and interpretability); and (8) accessibility (nonproprietary, downloadable, available in different languages and for vulnerable groups, and incorporated into electronic health records). Balancing psychometric and pragmatic factors in the development of PROs is important for accelerating the incorporation of PROs into clinical practice. Published by Elsevier Inc.

  16. Measurement of laser absorptivity for operating parameters characteristic of laser drilling regime

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, M; Berthe, L; Fabbro, R; Muller, M [Laboratoire pour l' Application des Lasers de Puissance, UPR CNRS no1578, 16 Bis, Avenue Prieur de la Cote D' Or, 94114 Arcueil Cedex (France)], E-mail: matthieu.schneider@gmail.com

    2008-08-07

    Laser drilling in the percussion regime is commonly used in the aircraft industry to drill sub-millimetre holes in metallic targets. Characteristic laser intensities in the range of 10 MW cm{sup -2} are typically employed for drilling metallic targets. With these intensities the temperature of the irradiated matter is above the vaporization temperature and the drilling process is led by hydrodynamic effects. Although the main physical processes involved are identified, this process is not correctly understood or completely controlled. A major characteristic coefficient of laser-matter interaction for this regime, which is the absorptivity of the laser on the irradiated surface, is still unknown, because of the perturbing effects due to laser beam geometrical trapping inside the drilled hole. So, by using time resolved experiments, this study deals with the direct measurement of the variation of the intrinsic absorption of aluminium, nickel and steel materials, as a function of the incident laser intensity up to 20 MW cm{sup -2}. We observe that for this incident intensity, the absorptivity can reach up to 80%. This very high and unexpected value is discussed by considering the microscopic behaviour of the heated matter near the vapour-liquid interface that undergoes possible Rayleigh-Taylor instability or volume absorption.

  17. Measurement of laser absorptivity for operating parameters characteristic of laser drilling regime

    Science.gov (United States)

    Schneider, M.; Berthe, L.; Fabbro, R.; Muller, M.

    2008-08-01

    Laser drilling in the percussion regime is commonly used in the aircraft industry to drill sub-millimetre holes in metallic targets. Characteristic laser intensities in the range of 10 MW cm-2 are typically employed for drilling metallic targets. With these intensities the temperature of the irradiated matter is above the vaporization temperature and the drilling process is led by hydrodynamic effects. Although the main physical processes involved are identified, this process is not correctly understood or completely controlled. A major characteristic coefficient of laser-matter interaction for this regime, which is the absorptivity of the laser on the irradiated surface, is still unknown, because of the perturbing effects due to laser beam geometrical trapping inside the drilled hole. So, by using time resolved experiments, this study deals with the direct measurement of the variation of the intrinsic absorption of aluminium, nickel and steel materials, as a function of the incident laser intensity up to 20 MW cm-2. We observe that for this incident intensity, the absorptivity can reach up to 80%. This very high and unexpected value is discussed by considering the microscopic behaviour of the heated matter near the vapour-liquid interface that undergoes possible Rayleigh-Taylor instability or volume absorption.

  18. Measurement and flow visualization research of thermal hydraulic characteristics for the SFR reactor Vessel

    International Nuclear Information System (INIS)

    Cha, J. E.; Kim, S. O.; Choi, H. L.; Kim, H. B.; Kim, H. W.; Lee, S. H.

    2012-01-01

    In this report, the thermal hydraulic and flow visualization experiment was described for the KALIMER-600 water-scaled model. In order to investigate a thermal hydraulic characteristics for the SFR KALIMER-600, which has been conceptually designed in the KAERI, a water-scaled 1/10 reactor vessel model was designed and prepared through the scaling analysis during three-years research. In this research, SFR Photos system, which has inherently very complicated the internal structures, was fabricated with a transparent vessel. It was shown that a serious of thermal hydraulic test was conducted within a short period if modeled with water than sodium. Natural circulation test was successfully performed with the modeled heater assembly and heat exchanger system coupled with cooling system. The water-scaled RSV experimental facility made in this research could be used to study the USA development for the future SFR system and utilized to analyze the flow characteristics before changing a main internal part of Photos system. It could also be used to test a pool-inspection study and a sensor selection study before large scale sodium experiment. The PCV system prepared in this research could be utilized to test other TSH experiment and temperature field measurement

  19. XA readout chip characteristics and CdZnTe spectral measurements

    International Nuclear Information System (INIS)

    Barbier, L.M.; Birsa, F.; Odom, J.

    1999-01-01

    The authors report on the performance of a CdZnTe (CZT) array readout by an XA (X-ray imaging chip produced at the AMS foundry) application specific readout chip (ASIC). The array was designed and fabricated at NASA/Goddard Space Flight Center (GSFC) as a prototype for the Burst Arc-Second Imaging and Spectroscopy gamma-ray instrument. The XA ASIC was obtained from Integrated Detector and Electronics (IDE), in Norway. Performance characteristics and spectral data for 241 Am are presented both at room temperature and at -20 C. The measured noise (σ) was 2.5 keV at 60 keV at room temperature. This paper represents a progress report on work with the XA ASIC and CZT detectors. Work is continuing and in particular, larger arrays are planned for future NASA missions

  20. Measurement of nonclinical personality characteristics of women with anorexia nervosa or bulimia nervosa.

    Science.gov (United States)

    Pryor, T; Wiederman, M W

    1996-10-01

    Past research on personality and eating disorders has most often emphasized personality psychopathology and personality disorders. We further investigated nonclinical personality characteristics among women with anorexia nervosa (n = 35) or bulimia nervosa (n = 45) using the Multidimensional Personality Questionnaire (MPQ; Tellegen, 1982, 1985). The MPQ measures several personality traits that have been shown to consist of a substantial genetic component (Tellegen et al., 1988). In logistic regression analyses, women with anorexia nervosa evidenced greater degrees of control (vs. impulsivity) and general constraint, and a lower degree of absorption in sensory experiences relative to those with bulimia nervosa. Relative to the normative population (Tellegen, 1982), our sample evidenced very low scores on Well-being, Social Closeness, and Positive Affectivity and high scores on Stress Reaction, Alienation, and Negative Affectivity. Our results emphasize the importance of considering nonclinical personality features and temperament, and varying methods of assessment, in the understanding of predisposing factors for eating disorders.

  1. Characteristic Rain Events: A Methodology for Improving the Amenity Value of Stormwater Control Measures

    DEFF Research Database (Denmark)

    Smit Andersen, Jonas; Lerer, Sara Maria; Backhaus, Antje

    2017-01-01

    of achieving amenity value is to stage the rainwater and thus bring it to the attention of the public. We present here a methodology for creating a selection of rain events that can help bridge between engineering and landscape architecture when dealing with staging of rainwater. The methodology uses......Local management of rainwater using stormwater control measures (SCMs) is gaining increased attention as a sustainable alternative and supplement to traditional sewer systems. Besides offering added utility values, many SCMs also offer a great potential for added amenity values. One way...... quantitative and statistical methods to select Characteristic Rain Events (CREs) for a range of frequent return periods: weekly, bi-weekly, monthly, bi-monthly, and a single rarer event occurring only every 1–10 years. The methodology for selecting CREs is flexible and can be adjusted to any climatic settings...

  2. Methods for the numerical calculation of the plasma potential from measured Langmuir probe characteristics

    International Nuclear Information System (INIS)

    Seifert, W.; Johanning, D.; Bankov, N.

    1986-01-01

    In a previous paper the results of the Langmuir probe experiment carried out on board of two INTERKOSMOS satellites have been described. The experiences have shown that the usage of high quality algorithms for analyzing the current-voltage-characteristics is necessary to yield real physical parameters. The key problem is the determination of the plasma potential. This paper reviews the different methods to determine the plasma potential especially under the circumstances of computer application. The test of the well developed methods shows, that for the evaluation of the applied methods a number of different factors, discussed in the following sections of this paper, has to be taken into account. The used test data are model values or real measurements obtained by the satellite missions IK-10, IK-18 and BULGARIA-1300. The computer procedures have been realized as FORTRAN-subroutines for the BESM 6 and ES 1040. (author)

  3. A Simple Experiment to Determine the Characteristics of an NTC Thermistor for Low-Temperature Measurement Applications

    Science.gov (United States)

    Mawire, A.

    2012-01-01

    A simple low-cost experiment for undergraduate students to determine the characteristics of a negative temperature coefficient of resistance thermistor is presented. The experiment measures the resistance-temperature and voltage-temperature characteristics of the thermistor. Results of the resistance-temperature experiment are used to determine…

  4. Flight Measurements of the Flying Qualities of a Lockheed P-80A Airplane (Army No. 44-85099) - Stalling Characteristics

    Science.gov (United States)

    Anderson, Seth B.; Cooper, George E.

    1947-01-01

    This report contains the flight-test results of the stalling characteristics measured during the flying-qualities investigation of the Lockheed P-8OA airplane (Army No. 44-85099). The tests were conducted in straight and turning flight with and without wing-tip tanks. These tests showed satisfactory stalling characteristics and adequate stall warning for all configurations and conditions tested.

  5. Middle School Characteristics That Predict Student Achievement, as Measured by the School-Wide California API Score

    Science.gov (United States)

    Paredes, Josie Abaroa

    2013-01-01

    The purpose of this study was to investigate, through quantitative research, effective middle school characteristics that predict student achievement, as measured by the school-wide California API score. Characteristics were determined using an instrument developed by the Office of Superintendent of Public Instruction (OSPI), which asked middle…

  6. Faculty Perceptions of Characteristics Needed for Clinical Success at Military Nurse Anesthesia Programs

    National Research Council Canada - National Science Library

    Clayton, Brian

    1998-01-01

    In this exploratory descriptive study an investigator-developed survey tool was used to describe military clinical faculty's perception of characteristics nurse anesthesia students need for success...

  7. The Corrosion Inhibition Characteristics of Sodium Nitrite Using an On-line Corrosion Rate Measurement System

    International Nuclear Information System (INIS)

    Park, Mal-Yong; Kang, Dae-Jin; Moon, Jeon-Soo

    2015-01-01

    An on-line corrosion rate measurement system was developed using a personal computer, a data acquisition board and program, and a 2-electrode corrosion probe. Reliability of the developed system was confirmed with through comparison test. With this system, the effect of sodium nitrite (NaNO 2 ) as a corrosion inhibitor were studied on iron and aluminum brass that were immersed in sodium chloride (NaCl) solution. Corrosion rate was measured based on the linear polarization resistance method. The corrosion rates of aluminum brass and iron in 1% NaCl solutions were measured to be 0.290 mm per year (mmpy) and 0.2134 mmpy, respectively. With the addition of 200 ppm of NO 2 - , the corrosion rates decreased to 0.0470 mmpy and 0.0254 mmpy. The addition of NO 2 - caused a decrease in corrosion rates of both aluminum brass and iron, yet the NO 2 - acted as a more effective corrosion inhibitor for iron. than aluminum brass

  8. Patients With Thumb Carpometacarpal Arthritis Have Quantifiable Characteristic Expectations That Can Be Measured With a Survey.

    Science.gov (United States)

    Kang, Lana; Hashmi, Sohaib Z; Nguyen, Joseph; Lee, Steve K; Weiland, Andrew J; Mancuso, Carol A

    2016-01-01

    Although patient expectations associated with major orthopaedic conditions have shown clinically relevant and variable effects on outcomes, expectations associated with thumb carpometacarpal (CMC) arthritis have not been identified, described, or analyzed before, to our knowledge. We asked: (1) Do patients with thumb CMC arthritis express characteristic expectations that are quantifiable and have measurable frequency? (2) Can a survey on expectations developed from patient-derived data quantitate expectations in patients with thumb CMC arthritis? The study was a prospective cohort study. The first phase was a 12-month-period involving interviews of 42 patients with thumb CMC arthritis to define their expectations of treatment. The interview process used techniques and principles of qualitative methodology including open-ended interview questions, unrestricted time, and study size determined by data saturation. Verbatim responses provided content for the draft survey. The second phase was a 12-month period assessing the survey for test-retest reliability with the recruitment of 36 participants who completed the survey twice. The survey was finalized from clinically relevant content, frequency of endorsement, weighted kappa values for concordance of responses, and intraclass coefficient and Cronbach's alpha for interrater reliability and internal consistency. Thirty-two patients volunteered 256 characteristic expectations, which consisted of 21 discrete categories. Expectations with similar concepts were combined by eliminating redundancy while maintaining original terminology. These were reduced to 19 items that comprised a one-page survey. This survey showed high concordance, interrater reliability, and internal consistency, with weighted kappa values between 0.58 and 0.78 (95% CI, 0.39-0.78; p Patients with thumb CMC arthritis volunteer a characteristic and quantifiable set of expectations. Using responses recorded verbatim from patient interviews, a clinically

  9. Measurement of characteristic to total spectrum ratio of tungsten X-ray spectra for the validation of the modified Tbc model

    International Nuclear Information System (INIS)

    Lopez G, A. H.; Costa, P. R.; Tomal, A.

    2014-08-01

    Primary X-ray spectra were measured in the range of 80 to 150 kV in order to validate a computer program based on a semiempirical model for X-ray spectra evaluation(tbc and mod). The ratio between the characteristic lines and total spectrum was considered for comparing the simulated results and experimental data. The raw spectra measured by the Cd Te detector were corrected by the detector efficiency, Compton effects and characteristic Cd and Te X-rays escape peaks, using a software specifically developed. The software Origin 8.5.1 was used to calculate the spectra and characteristic peaks areas. The obtained result shows that the experimental spectra have higher effective energy than the simulated spectra computed with tbc and mod software. The behavior of the ratio between the characteristic lines and total spectrum for simulated data presents discrepancy with the experimental result. Computed results are in good agreement with theoretical data published by Green, for spectra obtained with 3.04 mm of additional aluminum filtration. The difference of characteristic to total spectrum ratio between experimental and simulated data increases with the tube voltage. (Author)

  10. Measurement of characteristic to total spectrum ratio of tungsten X-ray spectra for the validation of the modified Tbc model

    Energy Technology Data Exchange (ETDEWEB)

    Lopez G, A. H.; Costa, P. R. [University of Sao Paulo, Institute of Physics, Laboratory of Radiation Dosimetry and Medical Physics, Matao Street, alley R, 187, 66318 Sao Paulo (Brazil); Tomal, A., E-mail: ahlopezg@usp.br [Universidade Federal de Goias, Physics Institute, Campus Samambaia, 131 Goiania, Goias (Brazil)

    2014-08-15

    Primary X-ray spectra were measured in the range of 80 to 150 kV in order to validate a computer program based on a semiempirical model for X-ray spectra evaluation(tbc and mod). The ratio between the characteristic lines and total spectrum was considered for comparing the simulated results and experimental data. The raw spectra measured by the Cd Te detector were corrected by the detector efficiency, Compton effects and characteristic Cd and Te X-rays escape peaks, using a software specifically developed. The software Origin 8.5.1 was used to calculate the spectra and characteristic peaks areas. The obtained result shows that the experimental spectra have higher effective energy than the simulated spectra computed with tbc and mod software. The behavior of the ratio between the characteristic lines and total spectrum for simulated data presents discrepancy with the experimental result. Computed results are in good agreement with theoretical data published by Green, for spectra obtained with 3.04 mm of additional aluminum filtration. The difference of characteristic to total spectrum ratio between experimental and simulated data increases with the tube voltage. (Author)

  11. Characteristics and Outcomes of Female Infertility Treatment Programs Using Traditional Medicine in Korea: A Multisite Analysis.

    Science.gov (United States)

    Kim, Kyeong Han; Jang, Soobin; Lee, Ju Ah; Go, Ho-Yeon; Jung, Jeeyoun; Park, Sunju; Lee, Myeong Soo; Ko, Seong-Gyu

    2018-03-22

    Infertility has long been recognized as a treatable disease, and complementary and alternative medicine treatments, such as acupuncture and moxibustion, have been used in Korea and China. This study describes female infertility treatment programs that used traditional Korean medicine (TKM) and were conducted by local governments in Korea and evaluates its effectiveness and safety. The authors officially requested related information from the report of the infertility treatment programs and related sources from 2006 to 2016 from the Health & Welfare Ministry of Korea and the Association of Korean Medicine (AKOM). Additional information was obtained from six Korean databases. Data including basic information about the programs, participant information, interventions, and outcomes were abstracted. A total of 9 reports, including multiple years of data from 6 programs (total 13 programs), were identified. In these 13 programs, a total of 1023 female subjects participated, and 205 of the 887 subjects who completed the program reported a successful pregnancy, indicating a 23.1% pregnancy rate. The programs lasted 3-9 months, and interventional elements, such as herbal medicine, acupuncture, fumigation, and massage, were identified. Significant adverse effects were not reported. This study suggests that infertility treatment programs with TKM interventions exhibited a positive effect on pregnancy in females with infertility. Thus, the infertility treatment programs with TKM interventions are expected to be useful and might serve as the primary treatment before assisted reproduction techniques.

  12. Optimal Design of Measurement Programs for the Parameter Identification of Dynamic Systems

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; Brincker, Rune

    The design of measurement programs devoted to parameter identification of structural dynamic systems is considered. The design problem is formulated as an optimization problem to minimize the total expected cost that is the cost of failure and the cost of the measurement program. All...... the calculations are based on a priori knowledge and engineering judgement. One of the contribution of the approach is that the optimal number of sensors can be estimated. This is shown in a numerical example where the proposed approach is demonstrated. The example is concerned with design of a measurement program...

  13. Optimal Design of Measurement Programs for the Parameter Identification of Dynamic Systems

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; Brincker, Rune

    The design of a measured program devoted to parameter identification of structural dynamic systems is considered, the design problem is formulated as an optimization problem due to minimize the total expected cost of the measurement program. All the calculations are based on a priori knowledge...... and engineering judgement. One of the contribution of the approach is that the optimal nmber of sensors can be estimated. This is sown in an numerical example where the proposed approach is demonstrated. The example is concerned with design of a measurement program for estimating the modal damping parameters...

  14. Differences in the perception of characteristics of excellence of clinical tutors among residents and consultants at an emergency medicine residency program a qualitative research

    Directory of Open Access Journals (Sweden)

    Muna Saleem Aljahany

    2013-01-01

    Full Text Available Introduction: Defining exactly what characterizes a clinical tutor as excellent and another less effective, is an important task in assessing the effectiveness of clinical training and guiding faculty development. Aim: We aimed to evaluate those characteristics and measure differences in their perception among accomplished and non-accomplished consultants and residents in the Emergency Department. We also compared perceptions between the different groups of participants. Methods: The characteristics measured were extracted from an extensive search of previously published studies summarized in a review article. A qualitative study was conducted, using a 20 item questionnaire piloted from the refined characteristics (good indicator of reliability; Cronbach′s Alpha = 0.86. The questionnaire was distributed among all consultants and residents in Saudi Board of Emergency Medicine. Results: No significant difference between consultants′ and residents′ perception was found. "Sincere" was an exception 87.8% versus 55.1%, P = 0.013. Consultants′ specifications did not seem to affect perception on overall scores and its component sub-scores. Conclusion: Since results showed no relation between accomplished and non-accomplished consultants in perceiving those qualities, we excluded the lack of knowledge of those characteristics as a cause of being accomplished or non-accomplished. We suggest a greater dedication from program developers towards creating more opportunities to involve more consultants in basic Emergency Medicine training.

  15. Characteristics of research tracks in dermatology residency programs: a national survey.

    Science.gov (United States)

    Narala, Saisindhu; Loh, Tiffany; Shinkai, Kanade; Paravar, Taraneh

    2017-12-15

    Pursuing research is encouraged in dermatology residency programs. Some programs offer specific research or investigative tracks. Currently, there is little data on the structure or scope of research tracks in dermatology residency programs. An anonymous online survey was distributed to the Association of Professors of Dermatology listserve in 2016. Program directors of dermatology residency programs in the United States were asked to participate and 38 of the 95 program directors responded. The survey results confirmed that a 2+2 research track, which is two years of clinical training followed by two years of research, was the most common investigator trackmodel and may promote an academic career at the resident's home institution. Further studies will help determine the most effective research track models to promote long-term outcomes.

  16. A workplace stretching program. Physiologic and perception measurements before and after participation.

    Science.gov (United States)

    Moore, T M

    1998-12-01

    The purpose of this study was to implement a primary prevention program in the workplace targeted to prevent muscle strains. Physiologic and perception measurements were taken before and after participation in a stretching program developed to improve flexibility through conditioning. A one group pre-test post-test design was used with 60 employees enrolled in a 36 session stretching program in the workplace. Flexibility was measured by a flexibility profile including the sit and reach test, bilateral body rotation measurements, and shoulder rotation measurements. A statistically significant increase was found in all flexibility measurements at the conclusion of the study for the participants as a total group. Perception, as measured by the Fox Physical Self Perception Profile, was statistically significant in relation to participants' perceptions of their body attractiveness, physical conditioning, and overall self worth at the program's conclusion. In addition, participants who completed the program had zero occurrences of musculoskeletal injuries during the 2 month period. The results of this study suggest that continued development and implementation of stretching programs in the workplace may benefit employees by increasing flexibility and potentially preventing injuries due to muscle strains. Stretching programs in the workplace also may improve components of employees' perceptions of their physical bodies.

  17. Development of Affective Characteristics in Students in Vocational-Technical Nursing Programs.

    Science.gov (United States)

    Kintgen-Andrews, Jean

    A study was conducted to determine what progress is made by nursing students during their first two years of study in the development of affective characteristics closely associated with professional level practice. Two affective characteristics associated with professionalism were studied; autonomy and assertiveness. The Inner Directed Scale of…

  18. Atmospheric Radiation Measurement program facilities newsletter, April 2002.; TOPICAL

    International Nuclear Information System (INIS)

    Holdridge, D. J.

    2002-01-01

    The National Oceanic and Atmospheric Administration (NOAA) recently announced the development of El Nino conditions in the tropical Pacific Ocean near the South American coastline. Scientists detected a 4 F increase in the sea-surface temperatures during February. Conrad C. Lautenbacher, NOAA administrator and Under Secretary of Commerce for Oceans and Atmosphere, indicated that this warming is a sign that the Pacific Ocean is heading toward an El Nino condition. Although it is too early to predict how strong the El Nino will become or the conditions it will bring to the United States, Lautenbacher said that the country is likely to feel the effects as soon as midsummer (Figure 1). During the last El Nino in 1997-1998, the United States experienced strong weather impacts. Even though researchers don't understand what causes the onset of El Nino, they do recognize what to expect once development has begun. Scientists can monitor the development of El Nino through NOAA's advanced global climate monitoring system of polar-orbiting satellites and 72 ocean buoys moored across the equator in the Pacific Ocean. The resulting measurements of surface meteorological parameters and upper ocean temperatures are made available to scientists on a real-time basis, allowing for timely monitoring and predictions. This complex monitoring array enabled NOAA to predict the 1997-1998 El Nino six months in advance

  19. Characteristics and New Measurement Method of NCSFs of Individual Color Mechanisms of Human Vision

    International Nuclear Information System (INIS)

    Jing-Jing, Ge; Zhao-Qi, Wang; Yan, Wang; Kan-Xing, Zhao

    2010-01-01

    We propose a new method for determining neural contrast sensitivity functions (NCSFs) of isolated color mechanisms based on the measurements of wave-front aberrations and isoluminant color contrast sensitivity functions (CSFs). Compared with the traditional method, this technique avoids the coherent noise and speckle noise, which are brought by the interference of laser beams, and has great flexibility for the measurements of NCSF of different color mechanisms. Our experiments indicate that the mean NCSF and CSF of the red mechanism are higher than those of the green mechanism, respectively, while those of the blue mechanism are the lowest. However the relative heights of the peak of NCSF and CSF between red and green mechanisms vary in subjects. There are some individuals whose peak values of NCSF and/or CSF of green mechanism are higher than that of the red mechanism. The NCSFs and CSFs of isolated color mechanisms all exhibit the similar characteristics and variation tendency. With the statistical average, the NCSFs of the red, green and blue mechanisms are higher than the corresponding CSFs in the whole spatial frequency. Compared with the corresponding CSFs curves, the peaks of the NCSFs of isolated color mechanisms shift toward higher spatial frequencies, especially for that of blue mechanism which has a largest shift of 3.9c/deg

  20. Characteristics of X ray calibration fields for performance test of radiation measuring instruments

    International Nuclear Information System (INIS)

    Shimizu, Shigeru; Takahashi, Fumiaki; Sawahata, Tadahiro; Tohnami, Kohichi; Kikuchi, Hiroshi; Murayama, Takashi

    1999-02-01

    Performance test and calibration of the radiation measuring instruments for low energy photons are made using the X ray calibration fields which are monochromatically characterized by filtration of continuous X ray spectrum. The X ray calibration field needs to be characterized by some quality conditions such as quality index and homogeneity coefficient. The present report describes quality conditions, spectrum and some characteristics of X ray irradiation fields in the Facility of Radiation Standard of the Japan Atomic Energy Research Institute (FRS-JAERI). Fifty nine X ray qualities with the quality index of 0.6, 0.7, 0.8 and 0.9 were set for the tube voltages between 10 kV and 350 kV. Estimation of X ray spectrum measured with a Ge detector was made in terms of exposure, ambient dose equivalent and fluence for all the obtained qualities. Practical irradiation field was determined as the dose distribution uniformity is within ±3%. The obtained results improve the quality of X ray calibration fields and calibration accuracy. (author)

  1. Measurement of acoustic characteristics of Japanese Buddhist temples in relation to sound source location and direction.

    Science.gov (United States)

    Soeta, Yoshiharu; Shimokura, Ryota; Kim, Yong Hee; Ohsawa, Tomohiro; Ito, Ken

    2013-05-01

    Although temples are important buildings in the Buddhist community, the acoustic quality has not been examined in detail. Buddhist monks change the location and direction according to the ceremony, and associated acoustical changes have not yet been examined scientifically. To discuss the desired acoustics of temples, it is necessary to know the acoustic characteristics appropriate for each phase of a ceremony. In this study, acoustic measurements were taken at various source locations and directions in Japanese temples. A directional loudspeaker was used as the source to provide vocal acoustic fields, and impulse responses were measured and analyzed. The speech transmission index was higher and the interaural cross-correlation coefficient was lower for the sound source directed toward the side wall than that directed toward the altar. This suggests that the change in direction improves speech intelligibility, and the asymmetric property of direct sound and complex reflections from the altar and side wall increases the apparent source width. The large and coupled-like structure of the altar of a Buddhist temple may have reinforced the reverberation components and the table in the altar, which is called the "syumidan," may have decreased binaural coherence.

  2. Environmental gamma-ray dose measurements with thermoluminescence dosemeters (TLD) and environmental radiation characteristics

    International Nuclear Information System (INIS)

    Kanematsu, Seiko

    1999-01-01

    It is important to evaluate environmental gamma-ray exposure both at work and home in order to assess people's collective dosages. Environmental gamma radiation was measured for air-absorbed dose with a thermoluminescence dosemeter at various points in the workplace and Ningyotoge, and workplace radiation characteristics were analyzed. From the results, the public dose due to gamma rays generated artificially was assessed to be sufficiently lower than the annual limit. For indoor environments of the workplace, the maximum dosage rate among measured values was 97 nGy/h and the minimum value was 70 nGy/h, the average over one year was 83 nGy/h. The average annual outdoor dosage for a year was 82 nGy/ h. In Ningyotoge, the maximum was 103 nGy/h, minimum 60 nGy/h, and average 88 nGy/h. These values depend on the nature of the soil and weather factors, showing higher values in the summer than in the winter in the workplace. There was no significant difference in the dosage rate in houses and the workplace. (author)

  3. Measurements of VOC adsorption/desorption characteristics of typical interior building materials

    Energy Technology Data Exchange (ETDEWEB)

    An, Y.; Zhang, J.S.; Shaw, C.Y.

    2000-07-01

    The adsorption/desorption of volatile organic compounds (VOCs) on interior building material surfaces (i.e., the sink effect) can affect the VOC concentrations in a building, and thus need to be accounted for an indoor air quality (IAQ) prediction model. In this study, the VOC adsorption/desorption characteristics (sink effect) were measured for four typical interior building materials including carpet, vinyl floor tile, painted drywall, and ceiling tile. The VOCs tested were ethylbenzene, cyclohexanone, 1,4-dichlorobenzene, benzaldehyde, and dodecane. These five VOCs were selected because they are representative of hydrocarbons, aromatics, ketones, aldehydes, and chlorine substituted compounds. The first order reversible adsorption/desorption model was based on the Langmuir isotherm was used to analyze the data and to determine the equilibrium constant of each VOC-material combination. It was found that the adsorption/desorption equilibrium constant, which is a measure of the sink capacity, increased linearly with the inverse of the VOC vapor pressure. For each compound, the adsorption/desorption equilibrium constant, and the adsorption rate constant differed significantly among the four materials tested. A detailed characterization of the material structure in the micro-scale would improve the understanding and modeling of the sink effect in the future. The results of this study can be used to estimate the impact of sink effect on the VOC concentrations in buildings.

  4. Measurement and analysis on optical characteristics of Aspergillus oryzae spores in infrared band

    Science.gov (United States)

    Li, Le; Hu, Yihua; Gu, Youlin; Chen, Wei; Xu, Shilong; Zhao, Xinying

    2015-10-01

    Spore is an important part of bioaerosols. The optical characteristics of spore is a crucial parameter for study on bioaerosols. The reflection within the waveband of 2.5 to15μm were measured by squash method. Based on the measured data, Complex refractive index of Aspergillus oryzae spores within the waveband of 3 to 5μm and 8 to 14 μm were calculated by using Krames-Kronig (K-K) relationship. Then,the mass extinction coefficient of Aspergillus oryzae spores within the waveband of 3 to 5μm and 8 to 14μm were obtained by utilizing Mie scattering theory, and the results were analyzed and discussed. The average mass extinction coefficient of Aspergillus oryzae spores is 0.51 m2/g in the range of 3 to 5μm and 0.48m2/g in the range of 8 to 14μm. Compared with common inorganic compounds, Aspergillus oryzae spores possesses a good extinction performance in infrared band.

  5. A new method for the measurement of the polarization characteristics of ferromagnetic films on ultracold neutrons

    International Nuclear Information System (INIS)

    Taran, Yu.V.

    1985-01-01

    A new method has been developed for measuring the polarization characteristics of ferromagnetic films on ultracold neutrons (UCN) by single-, double- and triple-transmission of UCN beam through one and the same film. To realize the method an installation has been proposed consisting of the two UCN storage traps connected with a mirror neutron guide. An investigated film is placed in the slit in the middle of the neutron guide. On both sides of the film a spin-flipper is installed bottle is equiped with three neutron values which permit filling in the bottle with UCN and allow oneto let UCN out to the neutron guide or detector. The neutrons once let out from one bottle into the neutron guide are caught by the other. The film can be moved out of the neutron guide or rotated. By manipulating with spin-flippers and the film one may take the integral polarization parameters of the film: transmission, polarizing and analysing efficiencies, so-called S-factor, which is the fourth independent linear combination of the elements of the square 2x2 transmission matrix of the film. The measurement parameters help to restore the film transmission matrix. Then a comparison is drawn with the theoretical models of UCN depolarization on transmission through a ferromagnetic film

  6. Columnar characteristics of aerosols by spectroradiometer measurements in the maritime area of the Cadiz Gulf (Spain)

    Science.gov (United States)

    Vergaz, Ricardo; Cachorro, Victoria E.; de Frutos, Ángel M.; Vilaplana, José M.; de La Morena, Benito A.

    2005-11-01

    Atmospheric aerosol characteristics represented by the spectral aerosol optical depth AOD) and the Ångström turbidity parameter were determined in the coastal area of the Gulf of Cádiz, (southwest of Spain). The columnar aerosol properties presented here correspond to the 1996-1999 period, and were obtained by solar direct irradiance measurements carried out by a Licor1800 spectroradiometer. The performance of this type of medium-spectral resolution radiometric system is analysed over the measured period. The detailed spectral information of these irradiance measurements enabled the use of selected non-absorption gases spectral windows to determine the columnar spectral AOD that was modelled by Ångström formula to obtain the coefficient. Temporal evolutions of instantaneous values together with a general statistical analysis represented by seasonal values, frequency distributions and some representative correlations for the AOD and the derived Ångström coefficient gave us the first insight of aerosol characteristics in this coastal area. Special attention was paid to the analysis of these aerosol properties at the nominal wavelengths of 440 nm, 670 nm, 870 nm and 1020 nm for the near-future comparisons with the Cimel sun-photometer data. However, taking the most representative aerosol wavelength of 500 nm, the variability of the AOD ranges from 0.005 to 0.53, with a mean of 0.12 (s.d = 0.07) and that of the parameter is given by a mean value of 0.93 (s.d. = 0.58) falling inside the range of marine aerosols. A quantitative discrimination of aerosol types was conducted on the basis of the spectral aerosol properties and air mass back trajectory analysis, which resulted in a mixed type because of the specificity of this area, given by very frequent desert dust episodes, continental and polluted local influences. This study represents the first extended data characterization about columnar properties of aerosols in Spain which has been continued by Cimel

  7. Road traffic injury on rural roads in Tanzania: measuring the effectiveness of a road safety program.

    Science.gov (United States)

    Zimmerman, Karen; Jinadasa, Deepani; Maegga, Bertha; Guerrero, Alejandro

    2015-01-01

    Road traffic injuries (RTIs) are a major public health burden, especially in low- and middle-income countries. There is limited data on RTIs in low-volume, rural African settings. This study attempted to survey all individuals living in households within 200 m of two low-volume rural roads in Tanzania and to collect data on RTIs. Local communities and users of the Bago to Talawanda road (intervention site) and Kikaro to Mihuga road (control site) were targeted and received an intensive program of road safety measures tailored using the crash characteristics of the baseline sample. Demographic data on all household members were collected, and those individuals who suffered an RTI in the previous 3 months had comprehensive information collected about the crash characteristics and the socioeconomic impact. The follow-up data collection occurred nine months after the baseline data were collected. The majority of crashes that caused an RTI involved a motorcycle (71%) and the majority of victims were male (82%) with an average age of 27. Injuries to the legs (55%) were most common and the average length of time away from normal activity was 27 (±33) days. RTI incidence at the intervention site increased during the course of the study (incidence before vs. incidence after) and was unchanged in the community control (incidence before vs. incidence after). The incidence of RTIs in the low-volume rural setting is unacceptably high and most commonly associated with motorcycles. The change in incidence is unreliable due to logistic restraints of the project and more research is needed to quantify the impact of various RTI prevention strategies in this setting. This study provides insight into road traffic injuries on low-volume rural roads, areas where very little research has been captured. Additionally, it provides a replicable study design for those interested in collecting similar data on low-volume rural roads.

  8. Geophysical investigation program Northern Switzerland: Refraction-seismic measurements 84

    International Nuclear Information System (INIS)

    Fromm, G.; Driessen, L.; Lehnen, I.

    1985-01-01

    Acting on instructions from the SGPK/Nagra working group (Baden, Switzerland), PRAKLA-SEISMOS GmbH, Hanover, planned, processed and interpreted seismic refraction measurements in northern Switzerland; CGG, Massy (France) was responsible for carrying out the field work. The aim of the survey was to investigate the shape and depth of a regional, WSW-ENE striking Permocarboniferous trough which underlays the mesozoic sediments of the Tabular Jura. The crystalline basement surface and possibly other geological boundaries were to be identified on the basis of refractor velocities. The recording arrangement included a 36 km spread in the assumed trough axis and four 12 km long spreads perpendicular to the axis (broad side 'T') which covered the trough edges. The resulting good quality data indicated two refractors: horizon H5 which is attributable to the lower Permocarboniferous could only be detected in the western half of the spread with any certainty. Horizon H6 probably represents the crystalline basement surface. If anisotropy is taken into account, the refractor velocity closely corresponds to the Gneiss of the WEIACH- and the Granite 3 of the BOETTSTEIN-borehole. This horizon was clearly discernible on all recordings and allowed the approximate mapping of the trough's shape. The assumed strike direction and depth was largely confirmed. In the WSW section the trough is more than 3300 m deep, it rises to - 3000 m in the ESE section and shows only in the east of the survey area a tendency towards a narrower width and shallower depth (depth data relate to the seismic reference datum at 500 m above MSL). (author)

  9. Measurement of partial discharge inception characteristics in sub-cooled liquid nitrogen

    International Nuclear Information System (INIS)

    Koo, J.Y.; Lee, S.H.; Shin, W.J.; Khan, Umer A.; Oh, S.H.; Seong, J.K.; Lee, B.W.

    2011-01-01

    We measured partial discharge and partial discharge initiation voltage of subcooled liquid nitrogen. Various kinds of test samples have been prepared. Sub-cooled temperature in liquid nitrogen were changed. The number of PD pluses were decreased when 68 K liquid nitrogen was used. Sub-cooled liquid nitrogen has positive effects to suppress PD activities. Partial discharge (PD) measurement is one of the effective diagnostic techniques to predict abnormal high voltage dielectric insulation conditions of the electric equipments. PD diagnostic techniques were also could be utilized to evaluate the conditions of cryogenic dielectric insulation media of high temperature superconducting electric equipment in liquid nitrogen. Generally, liquid nitrogen at 77 K is used as cryogenic and dielectric media for high temperature superconducting devices for high voltage electric power systems. But due to generation of bubbles during quench conditions which cause harmful effect on the properties of liquid nitrogen insulation, sub-cooled nitrogen under 77 K was also employed to suppress bubble formation. In this work, investigation of PD characteristics of sub-cooled liquid nitrogen was conducted in order to clarify the relation between PD inception and the temperature of liquid nitrogen. It was observed that measured PDIV (PD inception voltage) shows little differences according to the sub-cooled temperature of liquid nitrogen, but the magnitude and total numbers of PD has been slightly decreased according the decrease of cooled temperature of liquid nitrogen. From experimental results, it was deduced that the sub-cooled liquid nitrogen from 68 K to 77 K, could be applicable without any considerations of the variation of PDIV.

  10. 75 FR 73090 - Medicare Program; Listening Session on Development of Additional Imaging Efficiency Measures for...

    Science.gov (United States)

    2010-11-29

    ...] Medicare Program; Listening Session on Development of Additional Imaging Efficiency Measures for Use in the...), HHS. ACTION: Notice of meeting. SUMMARY: This notice announces a listening session to receive comments... Quality Data Reporting Program (HOP QDRP), which is authorized under section 1833(t)(17) of the Social...

  11. Improving MC and A Oversight in Russia by Implementing Measurement and Training Programs

    International Nuclear Information System (INIS)

    Bokov, Dmitry; Byers, Kenneth R.

    2004-01-01

    As the Russian State regulatory agency responsible for oversight of nuclear material control and accounting (MC and A), Gosatomnadzor of Russia (GAN) determines the status of the MC and A programs at Russian facilities. Last year, GAN developed and implemented their Nuclear Material Measurement Program Plan which documents current non-destructive assay (NDA) measurement capability in all regions of GAN; provides justification for upgrades to equipment, procedures and training; and defines the inspector-facility operator interface as it relates to NDA measurement equipment use. This Program Plan has helped to give the GAN inspection measurements more legal and official status as an oversight tool, and has also helped to improve other GAN MC and A oversight activities. These improvements include developing a tamper-indicating device program, conducting NDA workshops at specific Russian nuclear facilities to better train MC and A inspectors, and developing training evaluation programs. The Program is an important tool to address the GAN role in oversight of the Russian Federal Information System nuclear material database. This paper describes the feedback received from the GAN regional offices on the implementation of the Program Plan during its first year in operation and how the Program Plan has affected other GAN inspection activities to improve MC and A oversight.

  12. DepositScan, a Scanning Program to Measure Spray Deposition Distributions

    Science.gov (United States)

    DepositScan, a scanning program was developed to quickly measure spray deposit distributions on water sensitive papers or Kromekote cards which are widely used for determinations of pesticide spray deposition quality on target areas. The program is installed in a portable computer and works with a ...

  13. Identifying a Computer Forensics Expert: A Study to Measure the Characteristics of Forensic Computer Examiners

    Directory of Open Access Journals (Sweden)

    Gregory H. Carlton

    2010-03-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 The usage of digital evidence from electronic devices has been rapidly expanding within litigation, and along with this increased usage, the reliance upon forensic computer examiners to acquire, analyze, and report upon this evidence is also rapidly growing. This growing demand for forensic computer examiners raises questions concerning the selection of individuals qualified to perform this work. While courts have mechanisms for qualifying witnesses that provide testimony based on scientific data, such as digital data, the qualifying criteria covers a wide variety of characteristics including, education, experience, training, professional certifications, or other special skills. In this study, we compare task performance responses from forensic computer examiners with an expert review panel and measure the relationship with the characteristics of the examiners to their quality responses. The results of this analysis provide insight into identifying forensic computer examiners that provide high-quality responses. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  14. Transmission characteristic of graphene/TiO2 paper measured at Ka-band

    Science.gov (United States)

    Agusu, La; Mitsudo, Seitaro; Ahmad, La Ode; Herdianto, Fujii, Yutaka; Ishikawa, Yuya; Furuya, Takahashi; Ramadhan, La Ode Ahmad Nur

    2017-01-01

    The commercial telecommunication system in future would explore the electromagnetic spectrum with higher frequency than used now, because it requires higher speed of transmission data. Using the millimeter waves (mmW) with frequency ranging from 30 to 300 GHz, such requirement could be fulfilled. The upcoming 5G cellular technology is expected to use frequency 30 GHz or higher. Then materials with a specific characteristic at the mmW range are interesting to be explored and investigated. Here, we report the synthesis process of graphene/TiO2 deposited on paper and their transmission characteristics to the electromagnetic energy at frequency 27-40 GHz (Ka-Band). The reduced graphene oxide (rGO) was synthesized by a modified Hummers method with introduction of microwave irradiation in the process. rGO and TiO2 were mixed in ethanol solution and deposited on the paper by a spraying technique. Transmission coefficient of electromagnetic wave energy at Ka-Band was measured by using the millimeter vector network analyzer. Conductivity of rGO is 1.89 Scm-1 and for the graphene/TiO2 with TiO2 content is up to 50%, conductivity is down to Scm-1 Graphene/TiO2 layer with thickness of 60).lm and TiO2 loading up to 25% can has the transmission coefficient of -4 dB at the middle frequency of 31 GHz and bandwidth of 2.2 GHz. This can be useful as the electromagnetic interference shielding material at Ka-band.

  15. A program to compute geographical positions of underwater artifact based on linear measurements

    Digital Repository Service at National Institute of Oceanography (India)

    Ganesan, P.

    System) or any hydrographic post processing software, excellent site plans and other related maps can be prepared on any convenient scale. This user friendly program enables the marine archaeologists to process their field measurements much faster...

  16. Diverse characteristics of wetlands restored under the Wetlands Reserve Program in the Southeastern United States

    Science.gov (United States)

    Diane De Steven; Joel M. Gramling

    2012-01-01

    The Wetlands Reserve Program (WRP) restores converted or degraded wetlands on private working lands; however, the nature and outcomes of such efforts are undocumented in the Southeastern U.S. Identification of wetland types is needed to assess the program's conservation benefits, because ecological functions differ with hydrogeomorphic (HGM) type. We reviewed...

  17. Characteristics of Student Assistance and Prevention Counseling Programs in Response to Environmental Impacts

    Science.gov (United States)

    Corrigan, Matthew J.; Videka, Lynn; Loneck, Barry; Newman, Lucy J.; Rajendran, Kushmand

    2014-01-01

    The impacts of the terror attacks of September 11, 2001, were observed in Student Assistance and Prevention Counseling programs in New York schools. Methods: A mixed-method study of programs across the state, consisting of interviews (N = 14) and record reviews (N = 407), was conducted in New York State in 2002. Standardized state forms were used…

  18. Atmospheric radiation measurement program facilities newsletter, August 2001.

    Energy Technology Data Exchange (ETDEWEB)

    Holdridge, D. J.,ed.

    2001-09-04

    Summer 2001 Heat Wave--This summer has proved to be downright hot in the Southern Great Plains states. The temperatures soared to record-setting levels. The state of Oklahoma saw its fourth hottest July since 1895, while Kansas experienced its seventh warmest. The average temperature throughout most of Oklahoma for the month of July was 2.5-5.5 F above normal. The highest temperature recorded in the region during July was 107 F in Oklahoma City. Wichita, Kansas, had 17 July days with recorded temperatures of 100 F or above, while Medicine Lodge, Kansas, had 21. In addition, Oklahoma suffered its ninth driest July, with precipitation levels much below normal. Kansas fared better, receiving above-normal precipitation amounts. Nevertheless, regional July rainfall averaged 1.5-3.0 inches below normal. Not only is a summer heat wave uncomfortable, but it can also be dangerous. The National Weather Service (NWS) has increased efforts to alert the public to the hazards of heat waves. Prolonged excessive heat and humidity stress the human body and can, in some cases, cause death. The NWS has devised a heat index that is a measure of the heat we perceive as a function of air temperature and humidity. A heat index chart displays different zones from caution to extreme danger, much like a wind chill index chart used in the winter. The values represent conditions of light winds and shade. Thus, in full sunshine heat index values can increase by 15 F. Exposure to winds in hot, dry weather can be equally dangerous. The NWS sends out alerts when the heat index is expected to reach values with significant potential impact. The danger of heat-related illness increases with the number of consecutive days with high heat and humidity levels. Heat and humidity take their toll faster on the elderly, small children, and those with respiratory health problems. Heat-related illnesses come in several forms with different symptoms. From common sunburns to heat stroke, these heat disorders

  19. Atmospheric radiation measurement program facilities newsletter, August 2001.; TOPICAL

    International Nuclear Information System (INIS)

    Holdridge, D. J.

    2001-01-01

    Summer 2001 Heat Wave-This summer has proved to be downright hot in the Southern Great Plains states. The temperatures soared to record-setting levels. The state of Oklahoma saw its fourth hottest July since 1895, while Kansas experienced its seventh warmest. The average temperature throughout most of Oklahoma for the month of July was 2.5-5.5 F above normal. The highest temperature recorded in the region during July was 107 F in Oklahoma City. Wichita, Kansas, had 17 July days with recorded temperatures of 100 F or above, while Medicine Lodge, Kansas, had 21. In addition, Oklahoma suffered its ninth driest July, with precipitation levels much below normal. Kansas fared better, receiving above-normal precipitation amounts. Nevertheless, regional July rainfall averaged 1.5-3.0 inches below normal. Not only is a summer heat wave uncomfortable, but it can also be dangerous. The National Weather Service (NWS) has increased efforts to alert the public to the hazards of heat waves. Prolonged excessive heat and humidity stress the human body and can, in some cases, cause death. The NWS has devised a heat index that is a measure of the heat we perceive as a function of air temperature and humidity. A heat index chart displays different zones from caution to extreme danger, much like a wind chill index chart used in the winter. The values represent conditions of light winds and shade. Thus, in full sunshine heat index values can increase by 15 F. Exposure to winds in hot, dry weather can be equally dangerous. The NWS sends out alerts when the heat index is expected to reach values with significant potential impact. The danger of heat-related illness increases with the number of consecutive days with high heat and humidity levels. Heat and humidity take their toll faster on the elderly, small children, and those with respiratory health problems. Heat-related illnesses come in several forms with different symptoms. From common sunburns to heat stroke, these heat disorders

  20. Psychometric characteristics of the Spanish version of instruments to measure neck pain disability

    Directory of Open Access Journals (Sweden)

    González Luis

    2008-04-01

    Full Text Available Abstract Background The NDI, COM and NPQ are evaluation instruments for disability due to NP. There was no Spanish version of NDI or COM for which psychometric characteristics were known. The objectives of this study were to translate and culturally adapt the Spanish version of the Neck Disability Index Questionnaire (NDI, and the Core Outcome Measure (COM, to validate its use in Spanish speaking patients with non-specific neck pain (NP, and to compare their psychometric characteristics with those of the Spanish version of the Northwick Pain Questionnaire (NPQ. Methods Translation/re-translation of the English versions of the NDI and the COM was done blindly and independently by a multidisciplinary team. The study was done in 9 primary care Centers and 12 specialty services from 9 regions in Spain, with 221 acute, subacute and chronic patients who visited their physician for NP: 54 in the pilot phase and 167 in the validation phase. Neck pain (VAS, referred pain (VAS, disability (NDI, COM and NPQ, catastrophizing (CSQ and quality of life (SF-12 were measured on their first visit and 14 days later. Patients' self-assessment was used as the external criterion for pain and disability. In the pilot phase, patients' understanding of each item in the NDI and COM was assessed, and on day 1 test-retest reliability was estimated by giving a second NDI and COM in which the name of the questionnaires and the order of the items had been changed. Results Comprehensibility of NDI and COM were good. Minutes needed to fill out the questionnaires [median, (P25, P75]: NDI. 4 (2.2, 10.0, COM: 2.1 (1.0, 4.9. Reliability: [ICC, (95%CI]: NDI: 0.88 (0.80, 0.93. COM: 0.85 (0.75,0.91. Sensitivity to change: Effect size for patients having worsened, not changed and improved between days 1 and 15, according to the external criterion for disability: NDI: -0.24, 0.15, 0.66; NPQ: -0.14, 0.06, 0.67; COM: 0.05, 0.19, 0.92. Validity: Results of NDI, NPQ and COM were consistent

  1. Clinical Characteristics of the Suicide Attempters Who Refused to Participate in a Suicide Prevention Case Management Program

    OpenAIRE

    Park, Soyoung; Choi, Kyoung Ho; Oh, Youngmin; Lee, Hae-Kook; Kweon, Yong-Sil; Lee, Chung Tai; Lee, Kyoung-Uk

    2015-01-01

    Case management interventions for suicide attempters aimed at helping adjust their social life to prevent reattempts have high nonparticipation and dropout rates. We analyzed the clinical characteristics of the group who refused to participate in the suicide prevention program in Korea. A total of 489 patients with a suicide attempt who visited Uijeongbu St. Mary's Hospital, the Catholic University of Korea, from December 2009 to December 2013 were analyzed. All patients were divided into the...

  2. Early in-situ measurements program for the Waste Isolation Pilot Plant

    International Nuclear Information System (INIS)

    Wowak, W.E.

    1979-06-01

    The technical basis and description of measurements for the early in-situ measurements program at the WIPP are described and a proposed organizational structure is presented. Measurements are needed for verification of design predictions and also for a prelude to the main experiment program. The design verification measurements will be concentrated in the first shaft and the underground support and access areas. Early experiments will be concentrated in the test drifts on the storage horizons. Recommendations are made to DOE for appropriate division of responsibility among Bechtel, the technical support contractor, the instrumentation contractor, and Sandia

  3. Mathematical simulation of processes in horizontal steam generator and the program of calculation of its characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Titov, V.F.; Zorin, V.M.; Gorburov, V.I. [OKB Gidropress, Moscow Energy Inst. (Russian Federation)

    1995-12-31

    On the basis of mathematical models describing the processes in horizontal steam generator (SG) the code giving the possibility to calculate the hydrodynamical characteristics in any point of water volume, has been developed. The code simulates the processes in SG in the stationary (or quasi-stationary) mode or operation only. The code may be used as a next step to calculations of the SG characteristics in the non-stationary modes of operation.

  4. Mathematical simulation of processes in horizontal steam generator and the program of calculation of its characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Titov, V F; Zorin, V M; Gorburov, V I [OKB Gidropress, Moscow Energy Inst. (Russian Federation)

    1996-12-31

    On the basis of mathematical models describing the processes in horizontal steam generator (SG) the code giving the possibility to calculate the hydrodynamical characteristics in any point of water volume, has been developed. The code simulates the processes in SG in the stationary (or quasi-stationary) mode or operation only. The code may be used as a next step to calculations of the SG characteristics in the non-stationary modes of operation.

  5. Test and evaluation about damping characteristics of hanger supports for nuclear power plant piping systems (Seismic Damping Ratio Evaluation Program)

    International Nuclear Information System (INIS)

    Shibata, H.; Ito, A.; Tanaka, K.; Niino, T.; Gotoh, N.

    1981-01-01

    Generally, damping phenomena of structures and equipments is caused by very complex energy dissipation. Especially, as piping systems are composed of many components, it is very difficult to evaluate damping characteristics of its system theoretically. On the other hand, the damping value for aseismic design of nuclear power plants is very important design factor to decide seismic response loads of structures, equipments and piping systems. The very extensive studies titled SDREP (Seismic Damping Ratio Evaluation Program) were performed to establish proper damping values for seismic design of piping as a joint work among a university, electric companies and plant makers. In SDREP, various systematic vibration tests were conducted to investigate factors which may contribute to damping characteristics of piping systems and to supplement the data of the pre-operating tests. This study is related to the component damping characteristics tests of that program. The object of this study is to clarify damping characteristics and mechanism of hanger supports used in piping systems, and to establish the evaluation technique of dispersing energy at hanger support points and its effect to the total damping ability of piping system. (orig./WL)

  6. Baseline sociodemographic characteristics of participants and dropout in Web-based weight reduction program in Serbia

    Directory of Open Access Journals (Sweden)

    Dragana Brdaric

    2015-10-01

    The findings show that the majority of participants of web-based weight loss program Health on menu were adult women who are highly educated. The average BMI of the respondents fall into the category of overweight. The findings demonstrate very high prevalence of attrition among participants. Given that this is the first time that this kind of web based program is introduced to Serbian participants, these results emphasize the importance of further continuation of such research. Also, those preliminary results highlight the need for evidence-based strategies in order to improve use of web based weight loss programs.

  7. Paratingent Derivative Applied to the Measure of the Sensitivity in Multiobjective Differential Programming

    Directory of Open Access Journals (Sweden)

    F. García

    2013-01-01

    Full Text Available We analyse the sensitivity of differential programs of the form subject to where and are maps whose respective images lie in ordered Banach spaces. Following previous works on multiobjective programming, the notion of -optimal solution is used. The behaviour of some nonsingleton sets of -optimal solutions according to changes of the parameter in the problem is analysed. The main result of the work states that the sensitivity of the program is measured by a Lagrange multiplier plus a projection of its derivative. This sensitivity is measured by means of the paratingent derivative.

  8. Determination of the integral characteristics of an asymmetrical thermal plume from air speed/velocity and temperature measurements

    DEFF Research Database (Denmark)

    Zukowska, Daria; Popiolek, Zbigniew; Melikov, Arsen Krikor

    2010-01-01

    , generated by a thermal manikin resembling the complex body shape and heat generated by a sitting person, were measured. Using the measured data, the integral characteristics of the generated asymmetrical thermal plume were calculated by the ADI-method, and the uncertainty in determination...

  9. Anthropological characteristics, internal organs measurements, and food consumption of Indonesian people, 1989-1993

    International Nuclear Information System (INIS)

    Sugiarto, C.; Bangun, M.; Singh, A.; Yazir, Y.; Alrasyid, H.; Hutagalung, H.

    1998-01-01

    This study has been conducted to obtain, assess and interpret data on morphological, anatomical, chemical and metabolic characteristics of Indonesian population of all ages for establishing an Indonesian Reference Man. The paper presents age and sex specific data on physical anthropometric measurements, and on weights and dimensions of internal organs of normal and healthy Indonesian people. In addition, the content of selected elements in main organs and foodstuff, and the data of daily food consumption of well nourished individuals in three different regions of Indonesia are also presented. Approximately 804 people of all ages were measured to obtain the physical/anthropometric data. The people chosen were from 3 Indonesian regions representing the middle class socioeconomic population. The average body weight and total body height of the age group 20-39 years were found to be 53.5 kg (range: 40-70 kg) and 160.4 cm (range: 147.3-179.8 cm) for males and 48.9 kg (range: 32.7-79.5 kg) and 150.9 cm (range: 141.8-167.3 cm) for females. The weights and dimensions of internal organs data were collected in Jakarta from about 155 sudden death victims. The weight of most male organs was generally about 1% to 19% larger than those of females. However, the female thyroid was 5.6% larger dm the males. The age specific food consumption were obtained in three regions of Indonesia. The content of elements in the selected foodstuffs are also included in this report. The results show that rice is consumed three times a day by most subjects. Milk and eggs are widely consumed and the intake tends to be higher in the younger age groups. Among the meat group, beef is the most popular and consumed with the highest frequency, followed by chicken both in popularity and quantity consumed. Vegetables, particularly the colored vegetables, are used daily in high amounts. (author)

  10. Research on measurement and modeling of the gastro intestine's frictional characteristics

    International Nuclear Information System (INIS)

    Wang, Kun Dong; Yan, Guo Zheng

    2009-01-01

    The frictional characteristics of an intestine are required basically for the development of a noninvasive endoscope for the human intestine. The frictional force is tested by measuring the current of the motor hauling the frictional coupons at an even speed. A multifunction data acquisition device with model NI-6008 USB is used and the data process is performed on the Labview software. Two kinds of materials with aluminum and copper are used. The surfaces are designed as triangle, rectangular, cylindrical and plane forms. The tested results indicate that the frictional resistance force includes the nominal frictional force and the visco-adhesive force. When the surface contour changes from the triangle to the rectangular, to the cylindrical and finally to the plane, the nominal frictional coefficients will decrease and the visco-adhesive force will increase. The nominal frictional force is related to the elastic restoring force, the real frictional force and the contact angle. The cohesive force is determined by the contact area and the contact angle. This research will provide some preliminary references to the design and the parameter selection of locomotion devices in the human gastro-intestine

  11. Measurement of characteristics of solid flow in the cyclone separators with fiber optical probe

    International Nuclear Information System (INIS)

    Li Shaohua; Li Yan; Li Jinjing; Yang Shi; Yang Hairui; Zhang Hai; Lu Junfu; Yue Guangxi

    2009-01-01

    In some applications, e.g. circulating fluidized beds (CFB), cyclones are usually operated at high solid loadings. Under high inlet solid concentration, most of the particles are collected at the wall and form a dense particle spiral band because of high separation efficiency. As a result, gas-solid reactions should occur mostly in the near-wall region. To understand the gas-solid reaction mechanism in the cyclone, an experimental study was conducted in a plexiglass CFB cold apparatus, with a riser of 0.2m I.D. and 5m high, and a standard Lapple cyclone. Fiber optical probe was used to measure the characteristics of solid flow in the cyclone, including particle velocity and volumetric solid concentration, especially in the near-wall region of the cyclone. Based on the experiment results, the combustion of carbon particles in the cyclone of a CFB boiler was estimated with group combustion theory. The calculated results show that combustion effectiveness factor ηeff of near-wall particle cloud is smaller than 1/25, which means the combustion rate of a carbon particle in the near-wall region is greatly restricted by other particles in the cloud.

  12. The premonitory urge to tic: measurement, characteristics, and correlates in older adolescents and adults.

    Science.gov (United States)

    Reese, Hannah E; Scahill, Lawrence; Peterson, Alan L; Crowe, Katherine; Woods, Douglas W; Piacentini, John; Walkup, John T; Wilhelm, Sabine

    2014-03-01

    In addition to motor and/or vocal tics, many individuals with Tourette syndrome (TS) or chronic tic disorder (CTD) report frequent, uncomfortable sensory phenomena that immediately precede the tics. To date, examination of these premonitory sensations or urges has been limited by inconsistent assessment tools. In this paper, we examine the psychometric properties of a nine-item self-report measure, the Premonitory Urge to Tic Scale (PUTS) and examine the characteristics and correlates of the premonitory urge to tic in a clinical sample of 122 older adolescents and adults with TS or CTD. The PUTS demonstrated adequate internal consistency, temporal stability, and concurrent validity. Premonitory urges were endorsed by the majority of individuals. Most individuals reported some relief from the urges after completing a tic and being able to stop their tics even if only temporarily. Degree of premonitory urges was not significantly correlated with age, and we did not observe any gender differences. Degree of premonitory urges was significantly correlated with estimated IQ and tic severity, but not severity of comorbid obsessive-compulsive disorder or attention-deficit hyperactivity disorder. Also, it was not related to concomitant medication status. These findings represent another step forward in our understanding of the premonitory sensations associated with TS and CTD. © 2013.

  13. Measuring diagnostic and predictive accuracy in disease management: an introduction to receiver operating characteristic (ROC) analysis.

    Science.gov (United States)

    Linden, Ariel

    2006-04-01

    Diagnostic or predictive accuracy concerns are common in all phases of a disease management (DM) programme, and ultimately play an influential role in the assessment of programme effectiveness. Areas, such as the identification of diseased patients, predictive modelling of future health status and costs and risk stratification, are just a few of the domains in which assessment of accuracy is beneficial, if not critical. The most commonly used analytical model for this purpose is the standard 2 x 2 table method in which sensitivity and specificity are calculated. However, there are several limitations to this approach, including the reliance on a single defined criterion or cut-off for determining a true-positive result, use of non-standardized measurement instruments and sensitivity to outcome prevalence. This paper introduces the receiver operator characteristic (ROC) analysis as a more appropriate and useful technique for assessing diagnostic and predictive accuracy in DM. Its advantages include; testing accuracy across the entire range of scores and thereby not requiring a predetermined cut-off point, easily examined visual and statistical comparisons across tests or scores, and independence from outcome prevalence. Therefore the implementation of ROC as an evaluation tool should be strongly considered in the various phases of a DM programme.

  14. Climatological aspects of aerosol physical characteristics in Tunisia deduced from sun photometric measurements.

    Science.gov (United States)

    Chaâbane, Mabrouk; Azri, Chafai; Medhioub, Khaled

    2012-01-01

    Atmospheric and climatic data measured at Thala site (Tunisia) for a long-time period (1977-2001) are used to analyse the monthly, seasonal, and annual variations of the aerosol optical depth at 1 μm wavelength. We have shown that aerosol and microphysical properties and the dominating aerosol types depend on seasons. A comparison of the seasonal cycle of aerosol optical characteristics at Thala site showed that the contribution of long-range transported particles is expected to be larger in summer as a consequence of the weather stability typical of this season. Also, the winter decrease in atmospheric turbidity may result from increases in relative humidity and decreases in temperature, leading to increased particle size and mass and increased fall and deposition velocities. The spring and autumn weather patterns usually carry fine dust and sand particles for the desert area to Thala region. The annual behaviour of the aerosol optical depth recorded a period of stead increase started in 1986 until 2001. Trends in atmospheric turbidity after 1988 could be explained other ways by the contribution of the eruption of Mount Pinatubo in 1991 and by local or regional changes in climate or in aerosol emissions.

  15. Characteristic Rain Events: A Methodology for Improving the Amenity Value of Stormwater Control Measures

    Directory of Open Access Journals (Sweden)

    Jonas Smit Andersen

    2017-10-01

    Full Text Available Local management of rainwater using stormwater control measures (SCMs is gaining increased attention as a sustainable alternative and supplement to traditional sewer systems. Besides offering added utility values, many SCMs also offer a great potential for added amenity values. One way of achieving amenity value is to stage the rainwater and thus bring it to the attention of the public. We present here a methodology for creating a selection of rain events that can help bridge between engineering and landscape architecture when dealing with staging of rainwater. The methodology uses quantitative and statistical methods to select Characteristic Rain Events (CREs for a range of frequent return periods: weekly, bi-weekly, monthly, bi-monthly, and a single rarer event occurring only every 1–10 years. The methodology for selecting CREs is flexible and can be adjusted to any climatic settings; here we show its use for Danish conditions. We illustrate with a case study how CREs can be used in combination with a simple hydrological model to visualize where, how deep and for how long water is visible in a landscape designed to manage rainwater.

  16. Measuring safety culture in Dutch primary care: psychometric characteristics of the SCOPE-PC questionnaire.

    Science.gov (United States)

    Verbakel, Natasha J; Zwart, Dorien L M; Langelaan, Maaike; Verheij, Theo J M; Wagner, Cordula

    2013-09-17

    Patient safety has been a priority in primary healthcare in the last years. The prevailing culture is seen as an important condition for patient safety in practice and several tools to measure patient safety culture have therefore been developed. Although Dutch primary care consists of different professions, such as general practice, dental care, dietetics, physiotherapy and midwifery, a safety culture questionnaire was only available for general practices. The purpose of this study was to modify and validate this existing questionnaire to a generic questionnaire for all professions in Dutch primary care. A validated Dutch questionnaire for general practices was modified to make it usable for all Dutch primary care professions. Subsequently, this questionnaire was administered to a random sample of 2400 practices from eleven primary care professions. The instrument's factor structure, reliability and validity were examined using confirmatory and explorative factor analyses. 921 questionnaires were returned. Of these, 615 were eligible for factor analysis. The resulting SCOPE-PC questionnaire consisted of seven dimensions: 'open communication and learning from errors', 'handover and teamwork', 'adequate procedures and working conditions', 'patient safety management', 'support and fellowship', 'intention to report events' and 'organisational learning' with a total of 41 items. All dimensions had good reliability with Cronbach's alphas ranging from 0.70-0.90, and the questionnaire had a good construct validity. The SCOPE-PC questionnaire has sound psychometric characteristics for use by the different professions in Dutch primary care to gain insight in their safety culture.

  17. Medicaid/CHIP Program; Medicaid Program and Children's Health Insurance Program (CHIP); Changes to the Medicaid Eligibility Quality Control and Payment Error Rate Measurement Programs in Response to the Affordable Care Act. Final rule.

    Science.gov (United States)

    2017-07-05

    This final rule updates the Medicaid Eligibility Quality Control (MEQC) and Payment Error Rate Measurement (PERM) programs based on the changes to Medicaid and the Children's Health Insurance Program (CHIP) eligibility under the Patient Protection and Affordable Care Act. This rule also implements various other improvements to the PERM program.

  18. Quality and Characteristics of the North Carolina Pre-Kindergarten Program: 2011-2012 Statewide Evaluation

    Science.gov (United States)

    Peisner-Feinberg, Ellen; Schaaf, Jennifer; Hildebrandt, Lisa; LaForett, Dore

    2013-01-01

    The North Carolina Pre-Kindergarten Program (NC Pre-K) is a state-funded initiative for at-risk 4-year-olds, designed to provide a high quality, classroom-based educational program during the year prior to kindergarten entry. Children are eligible for NC Pre-K based on age, family income (at or below 75% of state median income), and other risk…

  19. Analysis of pellet center temperatures measured in HALDEN IFA-224 using program FREG-3

    International Nuclear Information System (INIS)

    Harayama, Yasuo; Izumi, Fumio

    1977-01-01

    To verify the program FREG-3, we compared the calculations by FREG-3 with those by measurement in a HALDEN instrumented fuel assembly, IFA-224. FREG-3 generally gives higher pellet center temperatures than the measurement. The temperature distribution calculated by FREG-3 to estimate the stored energy in fuel rods results in safety side. (auth.)

  20. A Complementary Measure of MIS Program Outcomes: Useful Insights from a Student Perspective

    Science.gov (United States)

    Karsten, Rex; Roth, Roberta M.

    2015-01-01

    Assessing student learning is a critical element in today's higher education environment. Learning assurance programs seek to assess and improve the quality of student learning, and may employ both direct and indirect measures. In this paper, we describe a practical learning assurance assessment measure developed and used as a part of a broader…

  1. 77 FR 35745 - Highway Safety Programs; Conforming Products List of Screening Devices To Measure Alcohol in...

    Science.gov (United States)

    2012-06-14

    ..., battery powered device with a semiconductor sensor. (2) Alcohol Countermeasure Systems Corp., submitted...-0062] Highway Safety Programs; Conforming Products List of Screening Devices To Measure Alcohol in... Screening Devices to Measure Alcohol in Bodily Fluids dated, March 31, 2008 (73 FR 16956). DATES: Effective...

  2. Program of critical experiment and measurements at the RA reactor; Program kriticnih eksperimenata i merenja na reaktoru RA

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1960-04-14

    Program described in this document describes in detail the following experiments: critical experiments with two reactor core lattices with 38 and 44 fuel channels, initial heavy water level being 1300 mm, criticality is achieved by adding heavy water; preliminary analysis of heavy water quality and verification of the fuel isotopic contents; experiment with the initial core which contains 56 fuel channels with maximum heavy water level according to the Russian proposal; measurement of neutron flux by Dy and In foils; measurement of reactivity excess dependent on the heavy water level and number of fuel rods; measurement of reactor period for determined reactivity change; measurement of moderator temperature coefficient; measurement of absolute flux. [Serbo-Croat] Program sadrzan u ovom dokumentu opisuje detaljno sledece eksperimente: kriticni eksperiment sa dve konfiguracije jezgra reaktora, sa 38 i 44 gorivna kanala, pocetni nivo teske vode je 1300 mm, kriticnost se dostize dodavanjem teske vode; prethodno izvrsenom analizom teske vode i proverom izotopskog sastava goriva; eksperiment sa pocetnom resetkom koja prema ruskom predlogu sadrzi 56 gorivnih kanala i maksimalnom visinom teske vode; merenje raspodele neutronskog fluksa folijama Dy i In; kalibracija regulacionih sipki; merenje viska reaktivnosti sa promenom visine nivoa teske vode i promenom broja sipki; merenje periode reaktora za odredjenu promenu reaktivnosti; merenje temperaturnog koeficijenta za vodu; merenje apsolutnog fluksa.

  3. Optimal Design of Measurement Programs for the Parameter Identification of Dynamic Systems

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; Brincker, Rune

    1993-01-01

    The design of a measurement program devoted to parameter identification of structural dynamic systems is considered. The design problem is formulated as an optimization problem to minimize the total expected cost that is the cost of failure and the cost of the measurement program. All...... the calculations are based on a priori knowledge and engineering judgement. One of the contribution of the approach is that the optimal number of sensory can be estimated. This is shown in an numerical example where the proposed approach is demonstrated. The example is concerned with design of a measurement...

  4. Optimal Design of Measurement Programs for the Parameter Identification of Dynamic Systems

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; Brincker, Rune

    1991-01-01

    The design of a measurement program devoted to parameter identification of structural dynamic systems is considered. The design problem is formulated as an optimization problem to minimize the total expected cost, i.e. the cost of failure and the cost of the measurement program. All...... the calculations are based on a priori knowledge and engineering judgement. One of the contributions of the approach is that the optimal number of sensors can be estimated. This is shown in a numerical example where the proposed approach is demonstrated. The example is concerned with design of a measurement...

  5. English Learners with Disabilities in High School: Population Characteristics, Transition Programs, and Postschool Outcomes

    Science.gov (United States)

    Trainor, Audrey; Murray, Angela; Kim, Hye-Jung

    2016-01-01

    Little is known about the characteristics, transition education, and postschool outcomes of English learners with disabilities (ELSWDs), despite that English learners are a rapidly growing group of U.S. students with consistently poor outcomes. This study examines a nationally representative sample of ELSWDs through a secondary analysis of the…

  6. A setup for measuring characteristics of microwave electric vacuum devices with open resonance structures

    DEFF Research Database (Denmark)

    Rybalko, Oleksandr; Ruban, A. I.; Vorob’ev, G. S.

    2015-01-01

    -tuning range, an additional periodic metal–dielectric structure is introduced into the open resonator. The experimental results of investigations of the energy, volt–ampere, and frequency characteristics of the modified diffraction-radiation generator prototype are compared to the characteristics...... of the generator without a metal–dielectric structure....

  7. Low-noise measurement of an RF amplitude on the basis of the non-linearity of a reactance characteristic

    International Nuclear Information System (INIS)

    Jaeger, R.

    1978-12-01

    In the development of fast RF amplitude measurement systems the accuracy is limited above all by the statistical errors of measurement. This limitation is smaller in a non-d.c. measurement technique as compared with a d.c. technique and is constituted by the thermal noise of the equivalent resistances. This is the first report on such a measuring system utilizing the non-linear capacity characteristic of a varactor diode to demodulate the RF amplitude. An accuracy of the amplitude measurement of 10 -5 was achieved in the S band (2.7 GHz) at room temperature and a bandwith of 100 kHz. (orig.) [de

  8. Land-ocean contrast on electrical characteristics of lightning discharge derived from satellite optical measurements

    Science.gov (United States)

    Adachi, T.; Said, R.; Cummer, S. A.; Li, J.; Takahashi, Y.; Hsu, R.; Su, H.; Chen, A. B.; Mende, S. B.; Frey, H. U.

    2010-12-01

    Comparative studies on the electrical properties of oceanic and continental lightning are crucial to elucidate air discharge processes occurring under different conditions. Past studies however have primarily focused on continental lightning because of the limited coverage of ground-based instruments. Recent satellite measurements by FORMOSAT-2/ISUAL provided a new way to survey the global characteristics of lightning and transient luminous events regardless of land and ocean. In this study, we analyze ISUAL/spectrophotometer data to clarify the electrical properties of lightning on a global level. Based on the results obtained by Cummer et al. [2006] and Adachi et al. [2009], the OI-777.4nm emission intensity is used to infer lightning electrical parameters. Results show a clear land-ocean contrast on the parameters of lightning discharge: in oceanic lightning, peak luminosity is 60 % higher and the time scale of return stroke is 30 % shorter. These results suggest higher peak current in oceanic lightning, which is consistent with the fact that elves, EMP-driven phenomena, also tend to occur over the ocean [Chen et al., 2008]. Further analysis of lightning events occurring around the Caribbean Sea shows that the transition-line of lightning electrical properties is precisely located along the coastline. We suggest that the differences in these electrical properties may be due to the boundary conditions (conductivity, surface terrain, etc). In this talk, based on the calibration with NLDN and Duke magnetometer data, current moment change and charge moment change will be globally evaluated using a complete set of the ISUAL-observed lightning events.

  9. Measured Hydrologic Storage Characteristics of Three Major Ice Wedge Polygon Types, Barrow, Alaska

    Science.gov (United States)

    Chamberlain, A. J.; Liljedahl, A.; Wilson, C. J.; Cable, W.; Romanovsky, V. E.

    2014-12-01

    Model simulations have suggested that the hydrologic fluxes and stores of Arctic wetlands are constrained by the micro-topographical features of ice wedge polygons, which are abundant in lowland tundra landscapes. Recently observed changes in ice wedge polygon landscapes - in particular, ice wedge degradation and trough formation - emphasize the need to better understand how differing ice wedge polygon morphologies affect the larger hydrologic system. Here we present three seasons of measured end-of-winter snow accumulation, continuous soil moisture and water table elevations, and repeated frost table mapping. Together, these describe the hydrologic characteristics of three main ice wedge polygon types: low centered polygons with limited trough development (representative of a ~500 year old vegetated drained thaw lake basin), and low- and high-centered polygons with well-defined troughs. Dramatic spatiotemporal variability exists both between polygon types and between the features of an individual polygon (e.g. troughs, centers, rims). Landscape-scale end-of-winter snow water equivalent is similar between polygon types, while the sub-polygon scale distribution of the surface water differs, both as snow and as ponded water. Some sub-polygon features appear buffered against large variations in water levels, while others display periods of prolonged recessions and large responses to rain events. Frost table elevations in general mimic the ground surface topography, but with spatiotemporal variability in thaw rate. The studied thaw seasons represented above long-term average rainfall, and in 2014, record high June precipitation. Differing ice wedge polygon types express dramatically different local hydrology, despite nearly identical climate forcing and landscape-scale snow accumulation, making ice wedge polygons an important component when describing the Arctic water, nutrient and energy system.

  10. Development of a measure of training program effectiveness for nuclear power plants

    International Nuclear Information System (INIS)

    Connelly, E.M.; Haas, P.; VanHemel, S.B.; Wreathall, J.

    1991-01-01

    The approach taken to develop measures of training program effectiveness recognizes that many subject matter experts (SMEs) with varying viewpoints on training effectiveness are working to insure nuclear power plant (NPP) safety. This paper discusses a model as the effectiveness rating strategies of various SMEs whose ratings are important to training; i.e., build a measure of effectiveness (MOE) representing the rating strategy of a sample of those SMEs. A quantitative model of these assessment strategies permits a broad review of them by ll interested parties and provides the basis for building a broadly accepted training program MOE. Major differences in assessment strategies can be examined to determine whether they are appropriate to the different points of view or are in conflict. This paper describes the basic concepts of building effectiveness measures, the methodology used to build the measures, a summary of the measures developed form NRC and industry sources, and an analysis of the differences among SMEs' measures

  11. Effectiveness of blood pressure educational and evaluation program for the improvement of measurement accuracy among nurses.

    Science.gov (United States)

    Rabbia, Franco; Testa, Elisa; Rabbia, Silvia; Praticò, Santina; Colasanto, Claudia; Montersino, Federica; Berra, Elena; Covella, Michele; Fulcheri, Chiara; Di Monaco, Silvia; Buffolo, Fabrizio; Totaro, Silvia; Veglio, Franco

    2013-06-01

    To assess the procedure for measuring blood pressure (BP) among hospital nurses and to assess if a training program would improve technique and accuracy. 160 nurses from Molinette Hospital were included in the study. The program was based upon theoretical and practical lessons. It was one day long and it was held by trained nurses and physicians who have practice in the Hypertension Unit. An evaluation of nurses' measuring technique and accuracy was performed before and after the program, by using a 9-item checklist. Moreover we calculated the differences between measured and effective BP values before and after the training program. At baseline evaluation, we observed inadequate performance on some points of clinical BP measurement technique, specifically: only 10% of nurses inspected the arm diameter before placing the cuff, 4% measured BP in both arms, 80% placed the head of the stethoscope under the cuff, 43% did not remove all clothing that covered the location of cuff placement, did not have the patient seat comfortably with his legs uncrossed and with his back and arms supported. After the training we found a significant improvement in the technique for all items. We didn't observe any significant difference of measurement knowledge between nurses working in different settings such as medical or surgical departments. Periodical education in BP measurement may be required, and this may significantly improve the technique and consequently the accuracy.

  12. A Statewide Examiniation of Mental Health Courts in Illinois: Program Characteristics and Operations

    Directory of Open Access Journals (Sweden)

    Arthur J. Lurigio

    2015-07-01

    Full Text Available This study represents the only broad-based, statewide evaluation of mental health courts (MHCs conducted to date.  Data were collected from 2010 to 2013 at each of the nine active MHC programs operating in Illinois at the start of the study. The purpose of the study was to compare and contrast the adjudicatory and supervisory models of each established Illinois MHC program by utilizing a variety of research methodologies. A four-year recidivism analysis of case-level data from three Illinois MHCs was also conducted. Illinois MHCs were largely characterized by the '10 essential elements of an MHC', such as voluntary participation, informed choice and hybrid team approaches to case manage clients. Results of the recidivism analysis suggest that MHCs compare favorably to other types of probation. Overall, findings revealed that Illinois MHCs are delivering services effectively and efficiently in a well-coordinated, client-centered team approach. Differences found among the MHCs are not evidence of significant variance from the model, and instead represent responsiveness to the unique culture of the court, the niche-filling character of the program, the expectations of the program stakeholders and the nature and extent of the local service environment.

  13. Characteristics of Successful Local Blended Programs in the Context of the Sloan-C Pillars

    Science.gov (United States)

    Moloney, Jacqueline F.; Hickey, Charmaine P.; Bergin, Amy L.; Boccia, Judith; Polley, Kathleen; Riley, Jeannette E.

    2010-01-01

    Drawing on the University of Massachusetts experience in developing successful blended local programs, this paper suggests guiding principles that include mission-driven responsiveness to local contexts and partnerships; using low-cost marketing strategies available through local relationships and brand; attending to students' preferences for…

  14. Eight-Week Traditional Mat Pilates Training-Program Effects on Adult Fitness Characteristics

    Science.gov (United States)

    Rogers, Kate; Gibson, Ann L.

    2009-01-01

    We investigated responses of adult, novice practitioners (n = 9) to an 8-week traditional mat Pilates program (P) that met 1 hr/day three times/week. Classes consisted primarily of beginner and intermediate level exercises. Compared to an active control group (C; n = 13) that showed no improvements, those in P significantly (p less than 0.05)…

  15. Static and Dynamic Coupling and Cohesion Measures in Object Oriented Programming

    OpenAIRE

    Vasudha Dixit, Dr. Rajeev Vishwkarma

    2013-01-01

    A large numbers of metrics have been proposed for measuring properties of object-oriented software such as size, inheritance, cohesion and coupling. The coupling metrics presented in this paper exploring the difference between inheritance and interface programming. This paper presents a measurement to measure coupling between object (CBO), number of associations between classes (NASSocC), number of dependencies in metric (NDepIN) and number of dependenciesout m...

  16. EVALUATION ON THE SEISMIC RESPONSE CHARACTERISTICS OF A ROAD EMBANKMENT BASED ON THE MODERATE EARTHQUAKE OBSERVATION AND THE MICROTREMOR MEASUREMENT

    Science.gov (United States)

    Hata, Yoshiya; Ichii, Koji; Yamada, Masayuki; Tokida, Ken-Ichi; Takezawa, Koichiro; Shibao, Susumu; Mitsushita, Junji; Murata, Akira; Furukawa, Aiko; Koizumi, Keigo

    Accurate evaluation on the seismic response characteristics of a road embankment is very important for the rational seismic assessment. However, in a lot of previous studies, the seismic response characteristics of an embankment were evaluated based on the results of shaking table test, centrifuge model test and dynamic FEM analysis. In this study, the transfer function and the shear wave velocity of a road embankment were evaluated based on the in-situ records of moderate earthquake observation and microtremor measurement. Test results show the possibility that the shear wave velocity of an embankment can be estimated by the earthquake observation or the microtremor measurement and the dynamic linear FEM analysis.

  17. Computation techniques and computer programs to analyze Stirling cycle engines using characteristic dynamic energy equations

    Science.gov (United States)

    Larson, V. H.

    1982-01-01

    The basic equations that are used to describe the physical phenomena in a Stirling cycle engine are the general energy equations and equations for the conservation of mass and conversion of momentum. These equations, together with the equation of state, an analytical expression for the gas velocity, and an equation for mesh temperature are used in this computer study of Stirling cycle characteristics. The partial differential equations describing the physical phenomena that occurs in a Stirling cycle engine are of the hyperbolic type. The hyperbolic equations have real characteristic lines. By utilizing appropriate points along these curved lines the partial differential equations can be reduced to ordinary differential equations. These equations are solved numerically using a fourth-fifth order Runge-Kutta integration technique.

  18. Characteristics of used CANDU fuel relevant to the Canadian nuclear fuel waste management program

    Energy Technology Data Exchange (ETDEWEB)

    Wasywich, K M

    1993-05-01

    Literature data on the characteristics of used CANDU power reactor fuel that are relevant to its performance as a waste form have been compiled in a convenient handbook. Information about the quantities of used fuel generated, burnup, radionuclide inventories, fission gas release, void volume and surface area, fuel microstructure, fuel cladding properties, changes in fuel bundle properties due to immobilization processes, radiation fields, decay heat and future trends is presented for various CANDU fuel designs. (author). 199 refs., 39 tabs., 100 figs.

  19. Characteristics of used CANDU fuel relevant to the Canadian nuclear fuel waste management program

    International Nuclear Information System (INIS)

    Wasywich, K.M.

    1993-05-01

    Literature data on the characteristics of used CANDU power reactor fuel that are relevant to its performance as a waste form have been compiled in a convenient handbook. Information about the quantities of used fuel generated, burnup, radionuclide inventories, fission gas release, void volume and surface area, fuel microstructure, fuel cladding properties, changes in fuel bundle properties due to immobilization processes, radiation fields, decay heat and future trends is presented for various CANDU fuel designs. (author). 199 refs., 39 tabs., 100 figs

  20. Can You See the Stars? Citizen-Science Programs to Measure Night Sky Brightness

    Science.gov (United States)

    Walker, Constance E.

    2009-05-01

    For the IYA2009 Dark Skies Awareness Cornerstone Project, partners in dark-sky, astronomy and environmental education are promoting three citizen-scientist programs that measure light pollution at local levels worldwide. These programs take the form of "star hunts", providing people with fun and direct ways to acquire heightened awareness about light pollution through first-hand observations of the night sky. Together the programs are spanning the entire IYA, namely: GLOBE at Night in March, Great World Wide Star Count in October, and How Many Stars during the rest of the year. Citizen-scientists - students, educators, amateur astronomers and the general public - measure the darkness of their local skies and contribute observations online to a world map. Anyone anywhere anytime can look within particular constellations for the faintest stars and match them to one of seven star maps. For more precise measurements, digital sky-brightness meters can be used. Measurements, along with the measurement location, time, and date, are submitted online, and within a few days to weeks a world map showing results is available. These measurements can be compared with data from previous years, as well as with satellite data, population densities, and electrical power-usage maps. Measurements are available online via Google Earth or other tools and as downloadable datasets. Data from multiple locations in one city or region are especially interesting, and can be used as the basis of a class project or science fair experiment, or even to inform the development of public policy. In the last few years these programs successfully conducted campaigns in which more than 35,000 observations were submitted from over 100 countries. The presentation will provide an update, describe how people can become involved and take a look ahead at the program's sustainability. For further information about these and other Dark Skies Awareness programs, please visit www.darkskiesawareness.org.

  1. The Atmospheric Radiation Measurement Program and interfaces with external data sources

    International Nuclear Information System (INIS)

    Stokes, G.M.; Cress, T.S.; Melton, R.B.

    1993-10-01

    The Atmospheric Radiation Measurement (ARM) Program is the Department of Energy's major field project in support of its global change research program. Its objective is to improve the performance of cloud and radiation models and parameterizations in general circulation models (GCMs) used for climate research. The data produced by ARM will be handled and maintained to satisfy the research needs of the program and to be accessible and usable by the general research and academic communities. In addition to data from field instrumentation, ARM Science Team needs include a substantial amount of data from outside the ARM Program (''external data''), which will be acquired and provided routinely through the ARM data system. With respect to data archival and sharing, the ARM Program reflects the objectives delineated by the US Global Change. The purpose of this presentation is to summarize the conceptual designs embodied in the ARM data system and the status of its implementation

  2. Broadening measures of success: results of a behavioral health translational research training program.

    Science.gov (United States)

    Baldwin, Julie A; Williamson, Heather J; Eaves, Emery R; Levin, Bruce L; Burton, Donna L; Massey, Oliver T

    2017-07-24

    While some research training programs have considered the importance of mentoring in inspiring professionals to engage in translational research, most evaluations emphasize outcomes specific to academic productivity as primary measures of training program success. The impact of such training or mentoring programs on stakeholders and local community organizations engaged in translational research efforts has received little attention. The purpose of this evaluation is to explore outcomes other than traditional academic productivity in a translational research graduate certificate program designed to pair graduate students and behavioral health professionals in collaborative service-learning projects. Semi-structured qualitative interviews with scholars, community mentors, and academic mentors were conducted regarding a translational research program to identify programmatic impacts. Interviews were transcribed and coded by the research team to identify salient themes related to programmatic outcomes. Results are framed using the Translational Research Impact Scale which is organized into three overarching domains of potential impact: (1) research-related impacts, (2) translational impacts, and (3) societal impacts. This evaluation demonstrates the program's impact in all three domains of the TRIS evaluation framework. Graduate certificate participants (scholars) reported that gaining experience in applied behavioral health settings added useful skills and expertise to their present careers and increased their interest in pursuing translational research. Scholars also described benefits resulting from networks gained through participation in the program, including valuable ties between the university and community behavioral health organizations. This evaluation of the outcomes of a graduate certificate program providing training in translational research highlights the need for more community-oriented and practice-based measures of success. Encouraging practitioner

  3. A Systematic Review of Aquatic Exercise Programs on Balance Measures in Older Adults

    OpenAIRE

    Foster, Shayla Diane

    2015-01-01

    There are a variety of studies performed using aquatic exercise programs to evaluate balance measures using a case-control or pretest-posttest method on healthy young populations (Geytenbeek, 2002). Balance can be defined as either static; maintenance of an upright posture and stance or dynamic; posture adaption and maintenance control of movements and stability (Rose & Clark, 2000). An aquatic exercise program will henceforth be defined as any acute or chronic exercises performed in water wi...

  4. Performance planning and measurement for DOE EM-International Technology Integration Program. A report on a performance measurement development workshop for DOE's environmental management international technology integration program

    International Nuclear Information System (INIS)

    Jordan, G.B.; Reed, J.H.; Wyler, L.D.

    1997-03-01

    This report describes the process and results from an effort to develop metrics for program accomplishments for the FY 1997 budget submission of the U.S. Department of Energy Environmental Management International Technology Integration Program (EM-ITI). The four-step process included interviews with key EM-ITI staff, the development of a strawman program logic chart, and all day facilitated workshop with EM-ITI staff during which preliminary performance plans and measures were developed and refined, and a series of follow-on discussions and activities including a cross-organizational project data base. The effort helped EM-ITI to crystallize and develop a unified vision of their future which they can effectively communicate to their own management and their internal and external customers. The effort sets the stage for responding to the Government Performance and Results Act. The metrics developed may be applicable to other international technology integration programs. Metrics were chosen in areas of eight general performance goals for 1997-1998: (1) number of forums provided for the exchange of information, (2) formal agreements signed, (3) new partners identified, (4) customers reached and satisfied, (5, 6) dollars leveraged by EM technology focus area and from foreign research, (7) number of foreign technologies identified for potential use in remediation of DOE sites, and (8) projects advanced through the pipeline

  5. EMF Rapid Program Engineering Projects, Project 1, Development of Recommendations for Guidelines for Field Source Measurement

    Energy Technology Data Exchange (ETDEWEB)

    Electric Research and Management, Inc.

    1997-03-11

    The goal of this project is to develop a protocol for measuring the electric and magnetic fields around sources. Data from these measurements may help direct future biological effects research by better defining the complexity of magnetic and electric fields to which humanity is exposed, as well asprovide the basis for rigorous field exposure analysis and risk assessment once the relationship between field exposure and biological response. is better understood. The data base also should have sufficient spatial and temporal characteristics to guide electric and magnetic field management. The goal of Task A is to construct a set of characteristics that would be ideal to have for guiding and interpreting biological studies and for focusing any future effort at field management. This ideal set will then be quantified and reduced according to the availability (or possible development of) instrumentation to measure the desired characteristics. Factors that also will be used to define pragmatic data sets will be the cost of collecting the data, the cost of developing an adequate data base, and the needed precision in measuring specific characteristics. A field, electric or magnetic, will always be ,some function of time and space. The first step in this section of the protocol development will be to determine what span of time and what portion of space are required to quantify the electric and magnetic fields around sources such as appliances and electrical apparatus. Constraints on time will be set by examining measurement limitations and biological data requirements.

  6. Methodology, Measurement and Analysis of Flow Table Update Characteristics in Hardware OpenFlow Switches

    KAUST Repository

    Kuźniar, Maciej; Pereší ni, Peter; Kostić, Dejan; Canini, Marco

    2018-01-01

    and performance characteristics is essential for ensuring successful and safe deployments.We propose a systematic methodology for SDN switch performance analysis and devise a series of experiments based on this methodology. The methodology relies on sending a

  7. Measurement of Phenotype Characteristics of Sasak Ducks: Indian Runner Ducks of Lombok Island Indonesia

    OpenAIRE

    Mohammad Hasil Tamzil; Budi Indarsih

    2017-01-01

    This study was designed to determine the phenotype characteristics of Sasak ducks in Lombok Island. The study used 64 Sasak ducks at production stage which were kept intensively by small holder farmers. Observations on the characteristics of the feather color were carried out directly on each animal. The data observed were feather colors, beak color, and the color of the foot and shank, while the data on the size of the body that was observed were body weight, beak length, neck length, back ...

  8. Anxiety among Adolescents : Measurement, Clinical Characteristics, and Influences of Parenting and Genetics

    OpenAIRE

    Olofsdotter, Susanne

    2017-01-01

    Anxiety is the most commonly reported mental health problem among adolescents. Still, many adolescents in need of treatment are not detected and the clinical characteristics and etiological pathways of adolescent anxiety are under-researched topics. This thesis examined the clinical utility of the Swedish versions of the Spence Children’s Anxiety Scale (SCAS) and the clinical characteristics of multiple anxiety disorders among psychiatrically referred adolescents, and the influence of parenti...

  9. MEASUREMENT OF FINANCIAL REPORTING QUALITY BASED ON IFRS CONCEPTUAL FRAMEWORK’S FUNDAMENTAL QUALITATIVE CHARACTERISTICS

    OpenAIRE

    Alexios KYTHREOTIS

    2014-01-01

    The IASB creates the standards and the conceptual framework in an attempt to create higher quality financial statements. Through this article, the extent to which this objective has been achieved is examined. An important characteristic of this research is the fact that the quality of financial statements is examined in light of the Conceptual Framework. Specifically, the two fundamental qualitative characteristics - relevance and faithful representation (reliability) - set by the IAS Committ...

  10. Relationship between Physical Inactivity and Health Characteristics among Participants in an Employee Wellness Program

    Science.gov (United States)

    Birdee, Gurjeet S.; Byrne, Daniel W.; McGown, Paula W.; Rothman, Russell L.; Rolando, Lori A.; Holmes, Marilyn C.; Yarbrough, Mary I.

    2013-01-01

    Objective To characterize factors associated with physical inactivity among employees with access to workplace wellness program. Methods We examined data on physical inactivity, defined as exercise less than once a week, from the 2010 health risk assessment (HRA) completed by employees at a major academic institution (n=16,976). Results Among employees, 18% individuals reported physical activity less than once a week. Individuals who were physically inactive as compared with physically active reported higher prevalence of cardiovascular diseases (AOR 1.36 [1.23–1.51], fair or poor health status (AOR 3.52 [2.97–4.17]) and absenteeism from work (AOR 1.59 [1.41–1.79]). Overall, physically inactive employees as compared to physically active employees reported more interest in health education programs. Conclusions Future research is needed to address barriers to physical inactivity to improve employee wellness and potentially lower health utility costs. PMID:23618884

  11. NF-6 program complex for BESM-6 computation of the basic neutron-physical characteristics of nuclear reactors

    International Nuclear Information System (INIS)

    Zizin, M.N.; Savochkina, O.A.; Chukhlova, O.P.

    1978-01-01

    A structure of standard designations is described and semantics of a number of standard values used in a NF-6 program complex is given. Main source data and results of neutron-physical reactor calculation are standard values, the peculiarities of FORTRAN and ALGOL-GDR algorithm languages in the DUBNA monitoring system were taken account of. As a base of standard values list the FIHAR system list, supplemented with new standard designations for integral reactor characteristics, is used. Developed is also a list of standard values to organize the exchange with external memory in the process of task solution and long-range storage

  12. Analyses of computer programs for the probabilistic estimation of design earthquake and seismological characteristics of the Korean Peninsula

    International Nuclear Information System (INIS)

    Lee, Gi Hwa

    1997-11-01

    The purpose of the present study is to develop predictive equations from simulated motions which are adequate for the Korean Peninsula and analyze and utilize the computer programs for the probabilistic estimation of design earthquakes. In part I of the report, computer programs for the probabilistic estimation of design earthquake are analyzed and applied to the seismic hazard characterizations in the Korean Peninsula. In part II of the report, available instrumental earthquake records are analyzed to estimate earthquake source characteristics and medium properties, which are incorporated into simulation process. And earthquake records are simulated by using the estimated parameters. Finally, predictive equations constructed from the simulation are given in terms of magnitude and hypocentral distances

  13. Measurement plan and observational construction program on drift excavation at the Horonobe Underground Research Laboratory project

    International Nuclear Information System (INIS)

    Yamasaki, Masanao; Yamaguchi, Takehiro; Funaki, Hironori; Fujikawa, Daisuke; Tsusaka, Kimikazu

    2008-09-01

    The Horonobe URL Project is being pursued by the Japan Atomic Energy Agency (JAEA) to enhance the reliability of relevant disposal technologies through investigations of the deep geological environment within the host sedimentary formations at Horonobe, northern Hokkaido. The project consists of two major research areas, 'Geoscientific Research' and 'R and D' on Geological Disposal', and proceeds in three overlapping phases, 'Phase I: Surface-based investigation', 'Phase II: Construction' and 'Phase III: Operation', over a period of 20 years. On the Horonobe URL Project, 'Phase 1' was finished in 2005FY and construction of the underground facility was started since then. Now, 'Phase 2' (investigations during construction of the underground facilities) is on-going. On the 'Development of engineering techniques for use in the deep underground environment' in Phase 1, based on the various types of data acquired on investigations from the surface, the design of underground facility in advance was planned. At the inception of the Phase II investigations, an investigation report titled 'Measurement Plan and Observational Construction Program on Shaft Excavation at the Horonobe URL Project' (hereinafter referred to as 'Observational Construction Program') was published. The Observational Construction Program summarizes followings from the Phase I investigations: measurements for safety/reasonable construction, measurements for R and D on enhancement of shaft design/construction technology, and measurements for verification of the deep geological environment model estimated before shaft excavation, and it is on-going. This report summarizes the measurement plan during construction of drifts based on the design in advance and the observational construction program for feedback measurements data into design and construction on subsequent steps. This report also describes about design and construction management program of underground facility and R and D program on

  14. Population characteristics of feral cats admitted to seven trap-neuter-return programs in the United States.

    Science.gov (United States)

    Wallace, Jennifer L; Levy, Julie K

    2006-08-01

    Internationally, large populations of feral cats constitute an important and controversial issue due to their impact on cat overpopulation, animal welfare, public health, and the environment, and to disagreement about what are the best methods for their control. Trap-neuter-return (TNR) programs are an increasingly popular alternative to mass euthanasia. The objective of this study was to determine the population characteristics of feral cats admitted to large-scale TNR programs from geographically diverse locations in the United States. Data from 103,643 feral cats admitted to TNR programs from 1993 to 2004 were evaluated. All groups reported more intact females (53.4%) than intact males (44.3%); only 2.3% of the cats were found to be previously sterilized. Overall, 15.9% of female cats were pregnant at the time of surgery. Pregnancy was highly seasonal and peaked between March and April for all of the groups. The average prenatal litter size was 4.1+/-0.1 fetuses per litter. Cryptorchidism was observed in 1.3% of male cats admitted for sterilization. A total of 0.4% of cats was euthanased because of the presence of debilitating conditions, and 0.4% died during the TNR clinics. Remarkably similar populations of cats with comparable seasonal variability were seen at each program, despite their wide geographical distribution. These results suggest that it is feasible to safely sterilize large numbers of feral cats and that the experiences of existing programs are a consistent source of information upon which to model new TNR programs.

  15. Greenhouse gas emissions during MSW landfilling in China: influence of waste characteristics and LFG treatment measures.

    Science.gov (United States)

    Yang, Na; Zhang, Hua; Shao, Li-Ming; Lü, Fan; He, Pin-Jing

    2013-11-15

    Reducing greenhouse gas (GHG) emissions from municipal solid waste (MSW) treatment can be highly cost-effective in terms of GHG mitigation. This study investigated GHG emissions during MSW landfilling in China under four existing scenarios and in terms of seven different categories: waste collection and transportation, landfill management, leachate treatment, fugitive CH4 (FM) emissions, substitution of electricity production, carbon sequestration and N2O and CO emissions. GHG emissions from simple sanitary landfilling technology where no landfill gas (LFG) extraction took place (Scenario 1) were higher (641-998 kg CO2-eq·t(-1)ww) than those from open dump (Scenario 0, 480-734 kg CO2-eq·t(-1)ww). This was due to the strictly anaerobic conditions in Scenario 1. LFG collection and treatment reduced GHG emissions to 448-684 kg CO2-eq·t(-1)ww in Scenario 2 (with LFG flare) and 214-277 kg CO2-eq·t(-1)ww in Scenario 3 (using LFG for electricity production). Amongst the seven categories, FM was the predominant contributor to GHG emissions. Global sensitivity analysis demonstrated that the parameters associated with waste characteristics (i.e. CH4 potential and carbon sequestered faction) and LFG management (i.e. LFG collection efficiency and CH4 oxidation efficiency) were of great importance. A further learning on the MSW in China indicated that water content and dry matter content of food waste were the basic factors affecting GHG emissions. Source separation of food waste, as well as increasing the incineration ratio of mixed collected MSW, could effectively mitigate the overall GHG emissions from landfilling in a specific city. To increase the LFG collection and CH4 oxidation efficiencies could considerably reduce GHG emissions on the landfill site level. While, the improvement in the LFG utilization measures had an insignificant impact as long as the LFG is recovered for energy generation. Copyright © 2013 Elsevier Ltd. All rights reserved.

  16. Integrated employee assistance program/managed behavioral health care benefits: relationship with access and client characteristics.

    Science.gov (United States)

    Levy Merrick, Elizabeth S; Hodgkin, Dominic; Horgan, Constance M; Hiatt, Deirdre; McCann, Bernard; Azzone, Vanessa; Zolotusky, Galina; Ritter, Grant; Reif, Sharon; McGuire, Thomas G

    2009-11-01

    This study examined service user characteristics and determinants of access for enrollees in integrated EAP/behavioral health versus standard managed behavioral health care plans. A national managed behavioral health care organization's claims data from 2004 were used. Integrated plan service users were more likely to be employees rather than dependents, and to be diagnosed with adjustment disorder. Logistic regression analyses found greater likelihood in integrated plans of accessing behavioral health services (OR 1.20, CI 1.17-1.24), and substance abuse services specifically (OR 1.23, CI 1.06-1.43). Results are consistent with the concept that EAP benefits may increase access and address problems earlier.

  17. Performance characteristics of axisymmetric venturi-like reverse-flow diverters. Consolidated Fuel Reprocessing Program

    International Nuclear Information System (INIS)

    Smith, G.V.; Counce, R.M.

    1984-01-01

    This paper presents experimental and model-predicted pressure-flow characteristics of axisymmetric venturi-like reverse-flow diverters (RFDs), the key component of fluid pumping systems utilized for the transport of hazardous fluids. The effects of several key geometric parameters, operating conditions, and fluid properties on the performance of the RFD are presented and compared to model predictions. The results indicate good agreement between data and theory over a large portion of the range of variables studied. Cavitation is observed to be the primary factor in limiting the performance of the RFD at small values of load impedances

  18. NedWind 25 Blade Testing at NREL for the European Standards Measurement and Testing Program

    Energy Technology Data Exchange (ETDEWEB)

    Larwood, S.; Musial, W.; Freebury, G.; Beattie, A.G.

    2001-04-19

    In the mid-90s the European community initiated the Standards, Measurements, and Testing (SMT) program to harmonize testing and measurement procedures in several industries. Within the program, a project was carried out called the European Wind Turbine Testing Procedure Development. The second part of that project, called Blade Test Methods and Techniques, included the United States and was devised to help blade-testing laboratories harmonize their testing methods. This report provides the results of those tests conducted by the National Renewable Energy Laboratory.

  19. Development of a simulation program to study error propagation in the reprocessing input accountancy measurements

    International Nuclear Information System (INIS)

    Sanfilippo, L.

    1987-01-01

    A physical model and a computer program have been developed to simulate all the measurement operations involved with the Isotopic Dilution Analysis technique currently applied in the Volume - Concentration method for the Reprocessing Input Accountancy, together with their errors or uncertainties. The simulator is apt to easily solve a number of problems related to the measurement sctivities of the plant operator and the inspector. The program, written in Fortran 77, is based on a particular Montecarlo technique named ''Random Sampling''; a full description of the code is reported

  20. Super Phenix. Monitoring of structures subject to irradiation. Neutron dosimetry measurement and calculation program

    International Nuclear Information System (INIS)

    Cabrillat, J.C.; Arnaud, G.; Calamand, D.; Manent, G.; Tavassoli, A.A.

    1984-09-01

    For the Super Phenix reactor, the evolution, versus the irradiation of the mechanical properties of the core diagrid steel is the object of studies and is particularly monitored. The specimens irradiated, now in PHENIX and will be later irradiated in SUPER PHENIX as soon as the first operating cycles. An important dosimetry program coupling calculation and measurement, is parallely carried out. This paper presents the reasons, the definition of the structure, of the development and of materials used in this program of dosimetry, as also the first results of a calculation-measurement comparison [fr

  1. Measuring of Traction and Speed Characteristics as Well as of Fuel Economy of a Car in Road Conditions

    OpenAIRE

    Krivtsov, Sergey; Syrbakov, Andrey Pavlovich; Korchuganova, Mariya Anatolievna

    2016-01-01

    This article is devoted to the identification of traction and speed characteristics as well as of fuel economy of motor vehicles in road conditions. Among common variants of measuring of the above stated values, the preference was given to the immediate gaining of factors by means of a computer-aided measuring system. There is a theoretical justification given to the suggested approach as well as methods and results allowing to provide a practically sufficient solution accuracy of the problem.

  2. Measuring of Traction and Speed Characteristics as Well as of Fuel Economy of a Car in Road Conditions

    Science.gov (United States)

    Krivtsov, Sergey N.; Syrbakov, Andrey P.; Korchuganova, Marina A.

    2016-08-01

    This article is devoted to the identification of traction and speed characteristics as well as of fuel economy of motor vehicles in road conditions. Among common variants of measuring of the above stated values, the preference was given to the immediate gaining of factors by means of a computer-aided measuring system. There is a theoretical justification given to the suggested approach as well as methods and results allowing to provide a practically sufficient solution accuracy of the problem.

  3. Blade row dynamic digital compression program. Volume 2: J85 circumferential distortion redistribution model, effect of Stator characteristics, and stage characteristics sensitivity study

    Science.gov (United States)

    Tesch, W. A.; Steenken, W. G.

    1978-01-01

    The results of dynamic digital blade row compressor model studies of a J85-13 engine are reported. The initial portion of the study was concerned with the calculation of the circumferential redistribution effects in the blade-free volumes forward and aft of the compression component. Although blade-free redistribution effects were estimated, no significant improvement over the parallel-compressor type solution in the prediction of total-pressure inlet distortion stability limit was obtained for the J85-13 engine. Further analysis was directed to identifying the rotor dynamic response to spatial circumferential distortions. Inclusion of the rotor dynamic response led to a considerable gain in the ability of the model to match the test data. The impact of variable stator loss on the prediction of the stability limit was evaluated. An assessment of measurement error on the derivation of the stage characteristics and predicted stability limit of the compressor was also performed.

  4. Dynamic Equivalent Modeling of a Grid-Tied Microgrid Based on Characteristic Model and Measurement Data

    Directory of Open Access Journals (Sweden)

    Changchun Cai

    2017-11-01

    Full Text Available Microgrids can significantly improve the utilization of distributed generation (DG and the reliability of the power supply. However, in the grid-tied operational mode, the interaction between the microgrid and the distribution network cannot be ignored. The paper proposes an equivalent modeling method for the microgrid under grid-tied mode based on a characteristic model. It can simplify the microgrid model in the numerical simulation of the distribution network. The proposed equivalent model can present the dynamic response of a microgrid but not miss any of its primary characteristics. The characteristic model is represented by a low-order time-varying differential equation with the same characteristics of the original microgrid system. During the modeling process, the voltage and the power exchanged between the microgrid and distribution network are collected as the training data for the identification of model parameters. A recursive damped least squares algorithm (RDLS is used for the parameter identification. A microgrid system containing different DGs is built to test the proposed modeling method in DIgSILENT, and the results show that the proposed dynamic equivalent modeling method is effective and the characteristic model can present the dynamic behaviors of the detailed model of a microgrid.

  5. Patient Characteristics Impacting Health State Index Scores, Measured by the EQ-5D of Females with Stress Urinary Incontinence Symptoms

    NARCIS (Netherlands)

    Tincello, Douglas; Sculpher, Mark; Tunn, Ralf; Quail, Deborah; van der Vaart, Huub; Falconer, Christian; Manning, Martina; Timlin, Louise

    2010-01-01

    Objective: To describe the characteristics of women seeking treatment for symptoms of stress urinary incontinence (SUI) and to investigate the association of SUI symptoms with generic health-related quality of life (HRQoL) as measured by the EuroQol (EQ-5D) instrument. Methods: The Stress Urinary

  6. The revised program for measurements in intense operation mode according to AVV-IMIS

    International Nuclear Information System (INIS)

    Bieringer, J.; Wirth, E.; Buehling, A.; Mueller-Neumann, M.; Haase, G.; Heinrich, T.; Steinkopff, T.; Wiezorek, C.

    2007-01-01

    The monitoring program for measurements in intense operation mode has been revised recently by a working group at the Federal Ministry for Environment, Nature Conservation and Reactor Safety (BMU). The major issues of the revision are reported in this contribution. Measurements in intense operation must be appropriate for fast assessment of the radiological situation, for estimating the dose to the population and for decisions on countermeasures to minimize the dose. In order to meet these requirements the structure of the measurement program in intense operation mode was divided into three phases when different exposition paths are relevant: before and during dispersion of radioactive material, immediately after dispersion of radioactive material has ended and a late phase when contamination values have decreased in different environmental media. For each of these phases a special measurement program was defined that is tailored to achieve the above mentioned objectives. Minimum detectable activity concentrations were introduced similar to the measurement program in routine operation mode. They follow the intervention levels in the catalogue of countermeasures and maximum permitted values given by the European Union (EU) for food and animal feed. The minimum detectable activity concentrations were defined such that the detection of 1/10 of the intervention levels for countermeasures is ensured. (orig.)

  7. Characteristics and Activities of Teachers on Distance Learning Programs that Affect Their Ratings

    Directory of Open Access Journals (Sweden)

    Svetlana M. Stanišić Stojić

    2014-09-01

    Full Text Available This paper presents an analysis of teachers’ ratings on distance learning undergraduate study programs: 7,156 students enrolled in traditional and 528 students enrolled in distance learning studies took part in the evaluation questionnaire, assessing 71 teachers. The data were collected from the Moodle platform and from the Singidunum University information system, and then analysed with SPSS statistical software. The parameters considered as potentially affecting teacher ratings are: number of teachers engaged in a particular course, total number of courses in which the teacher is engaged, teacher’s gender and age, total number of the available resources, and so forth. The results imply that scores assigned to individual teachers are consistent in both traditional and distance learning programs. The average rate was perceived to be lower when there were several teachers in a single course; such an effect was enhanced in cases where there was a significant age discrepancy among them. The other factors considered did not show a significant association with teacher ratings. Students’ main remarks about the work of the teachers have been summarised at the end of this paper. Possible explanations and implications of the results are discussed and recommendations are given.

  8. Radiographic angles in hallux valgus: differences between measurements made manually and with a computerized program.

    Science.gov (United States)

    Piqué-Vidal, Carlos; Maled-García, Ignaci; Arabi-Moreno, Juanjo; Vila, Joan

    2006-03-01

    The objective of this study was to compare angular measurements in the evaluation of hallux valgus deformities using a goniometer and a computerized program to assess degree of concordance between the two methods and determine the reliability of manual measurements. Angles measured included the hallux valgus angle (HVA), the intermetatarsal angle (IMA), the distal metatarsal articular angle (DMAA), and the proximal phalangeal articular angle (PPAA), also called the hallux valgus interphalangeus angle or interphalangeal angle. Measurements were made on preoperative weightbearing radiographs in 176 patients with symptomatic hallux valgus. Manual measurements were made with a goniometer by an orthopaedic surgeon. An independent experienced technician used digitized images to perform angular measurements with the Autocad software program (Autodesk Inc., San Rafael, CA). HVA values obtained with the two techniques were similar. However, significantly higher mean values were obtained with the Autocad for the IMA and PPAA measurements, and higher mean values were obtained for the DMAA measurement with the manual technique. Whereas differences were more or less randomly distributed for the HVA, in the remaining patients, measurements were clearly related to the measurement technique, i.e., for the DMAA, the manual technique had a tendency to show higher values, and for the IMA and PPAA the manual technique showed lower values than the computer. Correlations between both techniques for the different angular measurements were as follows: HVA, -0.179 (p = 0.018); DMMA, -0.294 (p Autocad angular measurements was excellent for the HVA (ICC = 0.89) and DMAA (ICC = 0.80) and very poor for the PPAA (ICC = 0.11) and IMA (ICC = 0.42). Angular measurements made on weightbearing radiographs with the Autocad in patients with hallux valgus deformities were more reliable than those made with a goniometer. Although for large angles, such as HVA and DMAA, results obtained with both

  9. Measuring improvement in knowledge of drug policy reforms following a police education program in Tijuana, Mexico.

    Science.gov (United States)

    Arredondo, J; Strathdee, S A; Cepeda, J; Abramovitz, D; Artamonova, I; Clairgue, E; Bustamante, E; Mittal, M L; Rocha, T; Bañuelos, A; Olivarria, H O; Morales, M; Rangel, G; Magis, C; Beletsky, L

    2017-11-08

    Mexico's 2009 "narcomenudeo reform" decriminalized small amounts of drugs, shifting some drug law enforcement to the states and mandating drug treatment diversion instead of incarceration. Data from Tijuana suggested limited implementation of this harm reduction-oriented policy. We studied whether a police education program (PEP) improved officers' drug and syringe policy knowledge, and aimed to identify participant characteristics associated with improvement of drug policy knowledge. Pre- and post-training surveys were self-administered by municipal police officers to measure legal knowledge. Training impact was assessed through matched paired nominal data using McNemar's tests. Multivariable logistic regression was used to identify predictors of improved legal knowledge, as measured by officers' ability to identify conceptual legal provisions related to syringe possession and thresholds of drugs covered under the reform. Of 1750 respondents comparing pre- versus post training, officers reported significant improvement (p < 0.001) in their technical understanding of syringe possession (56 to 91%) and drug amounts decriminalized, including marijuana (9 to 52%), heroin (8 to 71%), and methamphetamine (7 to 70%). The training was associated with even greater success in improving conceptual legal knowledge for syringe possession (67 to 96%) (p < 0.001), marijuana (16 to 91%), heroin (11 to 91%), and methamphetamine (11 to 89%). In multivariable modeling, those with at least a high school education were more likely to exhibit improvement of conceptual legal knowledge of syringe possession (adjusted odds ratio [aOR] 2.6, 95% CI 1.4-3.2) and decriminalization for heroin (aOR 2.7, 95% CI 1.3-4.3), methamphetamine (aOR 2.2, 95% CI 1.4-3.2), and marijuana (aOR 2.5, 95% CI 1.6-4). Drug policy reform is often necessary, but not sufficient to achieve public health goals because of gaps in translating formal laws to policing practice. To close such gaps, PEP initiatives

  10. Measuring improvement in knowledge of drug policy reforms following a police education program in Tijuana, Mexico

    Directory of Open Access Journals (Sweden)

    J. Arredondo

    2017-11-01

    Full Text Available Abstract Background Mexico’s 2009 “narcomenudeo reform” decriminalized small amounts of drugs, shifting some drug law enforcement to the states and mandating drug treatment diversion instead of incarceration. Data from Tijuana suggested limited implementation of this harm reduction-oriented policy. We studied whether a police education program (PEP improved officers’ drug and syringe policy knowledge, and aimed to identify participant characteristics associated with improvement of drug policy knowledge. Methods Pre- and post-training surveys were self-administered by municipal police officers to measure legal knowledge. Training impact was assessed through matched paired nominal data using McNemar’s tests. Multivariable logistic regression was used to identify predictors of improved legal knowledge, as measured by officers’ ability to identify conceptual legal provisions related to syringe possession and thresholds of drugs covered under the reform. Results Of 1750 respondents comparing pre- versus post training, officers reported significant improvement (p < 0.001 in their technical understanding of syringe possession (56 to 91% and drug amounts decriminalized, including marijuana (9 to 52%, heroin (8 to 71%, and methamphetamine (7 to 70%. The training was associated with even greater success in improving conceptual legal knowledge for syringe possession (67 to 96% (p < 0.001, marijuana (16 to 91%, heroin (11 to 91%, and methamphetamine (11 to 89%. In multivariable modeling, those with at least a high school education were more likely to exhibit improvement of conceptual legal knowledge of syringe possession (adjusted odds ratio [aOR] 2.6, 95% CI 1.4–3.2 and decriminalization for heroin (aOR 2.7, 95% CI 1.3–4.3, methamphetamine (aOR 2.2, 95% CI 1.4–3.2, and marijuana (aOR 2.5, 95% CI 1.6–4. Conclusions Drug policy reform is often necessary, but not sufficient to achieve public health goals because of gaps in translating

  11. Measuring energy-saving retrofits: Experiences from the Texas LoanSTAR program

    Energy Technology Data Exchange (ETDEWEB)

    Haberl, J.S.; Reddy, T.A.; Claridge, D.E.; Turner, W.D.; O`Neal, D.L.; Heffington, W.M. [Texas A and M Univ., College Station, TX (United States). Energy Systems Lab.

    1996-02-01

    In 1988 the Governor`s Energy Management Center of Texas received approval from the US Department of Energy to establish a $98.6 million state-wide retrofit demonstration revolving loan program to fund energy-conserving retrofits in state, public school, and local government buildings. As part of this program, a first-of-its-kind, statewide Monitoring and Analysis Program (MAP) was established to verify energy and dollar savings of the retrofits, reduce energy costs by identifying operational and maintenance improvements, improve retrofit selection in future rounds of the LoanSTAR program, and initiate a data base of energy use in institutional and commercial buildings located in Texas. This report discusses the LoanSTAR MAP with an emphasis on the process of acquiring and analyzing data to measure savings from energy conservation retrofits when budgets are a constraint. This report includes a discussion of the program structure, basic measurement techniques, data archiving and handling, data reporting and analysis, and includes selected examples from LoanSTAR agencies. A summary of the program results for the first two years of monitoring is also included.

  12. Algorithms and programs for solution of static and dynamic characteristics of counterflow heat exchangers with dissociating coolant

    International Nuclear Information System (INIS)

    Nitej, N.V.; Sharovarov, G.A.

    1982-01-01

    The method of estimation of counterflow heat exchanger characteristics is presented. Mathematical description of the processes is presented by the mass, energy and pulse conservation equations for both coolants and energy conservation equation for the wall which devides them. In the presence of chemical reactions the system is supplemented by equations, characterizing the kinetics of their progress. The methods of numerical solution of static and dynamic problems have been chosen, and the computer programs on the Fortran language have been developed. The schemes of solution of both problems are so constructed, that the conservation equations are placed in the main program, and such characteristics of the coolants as properties, heat transfer and friction coefficients, the mechanism of chemical reaction are concentrated in the subprogram unit. This allows to create the single method of solution with the flow of single-phase and two-phase coolants of abovecritical and supercritical paramters. The evaluation results of three heat exchangers are given: with heating of N 2 O 4 gas phase by heat of flue gas; with cooling of N 2 O 4 supercritical parameters by water; regenerator on N 2 O 4

  13. Biomechanical and neuromuscular characteristics of male athletes: implications for the development of anterior cruciate ligament injury prevention programs.

    Science.gov (United States)

    Sugimoto, Dai; Alentorn-Geli, Eduard; Mendiguchía, Jurdan; Samuelsson, Kristian; Karlsson, Jon; Myer, Gregory D

    2015-06-01

    Prevention of anterior cruciate ligament (ACL) injury is likely the most effective strategy to reduce undesired health consequences including reconstruction surgery, long-term rehabilitation, and pre-mature osteoarthritis occurrence. A thorough understanding of mechanisms and risk factors of ACL injury is crucial to develop effective prevention programs, especially for biomechanical and neuromuscular modifiable risk factors. Historically, the available evidence regarding ACL risk factors has mainly involved female athletes or has compared male and female athletes without an intra-group comparison for male athletes. Therefore, the principal purpose of this article was to review existing evidence regarding the investigation of biomechanical and neuromuscular characteristics that may imply aberrant knee kinematics and kinetics that would place the male athlete at risk of ACL injury. Biomechanical evidence related to knee kinematics and kinetics was reviewed by different planes (sagittal and frontal/coronal), tasks (single-leg landing and cutting), situation (anticipated and unanticipated), foot positioning, playing surface, and fatigued status. Neuromuscular evidence potentially related to ACL injury was reviewed. Recommendations for prevention programs for ACL injuries in male athletes were developed based on the synthesis of the biomechanical and neuromuscular characteristics. The recommendations suggest performing exercises with multi-plane biomechanical components including single-leg maneuvers in dynamic movements, reaction to and decision making in unexpected situations, appropriate foot positioning, and consideration of playing surface condition, as well as enhancing neuromuscular aspects such as fatigue, proprioception, muscle activation, and inter-joint coordination.

  14. Sociodemographic characteristics of nonparticipants in the Danish colorectal cancer screening program: a nationwide cross-sectional study

    DEFF Research Database (Denmark)

    Larsen, Mette Bach; Mikkelsen, Ellen Margrethe; Rasmussen, Morten

    2017-01-01

    INTRODUCTION: Fecal occult blood tests are recommended for colorectal cancer (CRC) screening in Europe. Recently, the fecal immunochemical test (FIT) has come into use. Sociodemographic differences between participants and nonparticipants may be less pronounced when using FIT as there are no prec......INTRODUCTION: Fecal occult blood tests are recommended for colorectal cancer (CRC) screening in Europe. Recently, the fecal immunochemical test (FIT) has come into use. Sociodemographic differences between participants and nonparticipants may be less pronounced when using FIT...... as there are no preceding dietary restrictions and only one specimen is required. The aim of this study was to examine the associations between sociodemographic characteristics and nonparticipation for both genders, with special emphasis on those who actively unsubscribe from the program. METHODS: The study was a national......, register-based, cross-sectional study among men and women randomized to be invited to participate in the prevalence round of the Danish CRC screening program between March 1 and December 31, 2014. Prevalence ratios (PRs) were used to quantify the association between sociodemographic characteristics...

  15. Value-based performance measures for Hanford Tank Waste Remedition System (TWRS) Program

    International Nuclear Information System (INIS)

    Keeney, R.L.; von Winterfeldt, D.

    1996-01-01

    The Tank Waste Remediation Systems (TWRS) Program is responsible for the safe storage, retrieval, treatment, and preparation for disposal of high-level waste currently stored in underground storage tanks at the Hanford site in Richland. The TWRS program has adopted a logical approach to decision making that is based on systems engineering and decision analysis (Westinghouse Hanford Company, 1995). This approach involves the explicit consideration of stakeholder values and an evaluation of the TWRS alternatives in terms of these values. Such evaluations need to be consistent across decisions. Thus, an effort was undertaken to develop a consistent, quantifiable set of measures that can be used by TVVRS to assess alternatives against the stakeholder values. The measures developed also met two additional requirements: 1) the number of measure should be relatively small; and 2) performance with respect to the measures should be relatively easy to estimate

  16. Prototype vibration measurement program for reactor internals (177-fuel assembly plant). Supplement 1

    International Nuclear Information System (INIS)

    Simonis, J.C.; Post, R.C.; Thoren, D.E.

    1976-08-01

    The surveillance specimen holder tubes installed in the Babcock and Wilcox 177-fuel assembly plants have been redesigned. The structural adequacy of this design has been verified through extensive analysis. The design adequacy will be further confirmed by measuring the vibrational response of the surveillance specimen holder tube during normal and transient flow operation. This report describes the vibration measurement program that will be conducted at Toledo Edison's Davis Besse 1 site

  17. Improving Metrological Reliability of Information-Measuring Systems Using Mathematical Modeling of Their Metrological Characteristics

    Science.gov (United States)

    Kurnosov, R. Yu; Chernyshova, T. I.; Chernyshov, V. N.

    2018-05-01

    The algorithms for improving the metrological reliability of analogue blocks of measuring channels and information-measuring systems are developed. The proposed algorithms ensure the optimum values of their metrological reliability indices for a given analogue circuit block solution.

  18. Use of the mathematical modelling method for the investigation of dynamic characteristics of acoustical measuring instruments

    Science.gov (United States)

    Vasilyev, Y. M.; Lagunov, L. F.

    1973-01-01

    The schematic diagram of a noise measuring device is presented that uses pulse expansion modeling according to the peak or any other measured values, to obtain instrument readings at a very low noise error.

  19. Determination of thermal characteristics of standard and improved hollow concrete blocks using different measurement techniques

    DEFF Research Database (Denmark)

    Caruana, C.; Yousif, C.; Bacher, Peder

    2017-01-01

    The lighter weight, improved thermal properties and better acoustic insulation of hollow-core concrete blocks are few of the characteristics that one encounters when comparing them to traditional Maltese globigerina limestone solid blocks. As a result, hollow concrete blocks have recently been...

  20. Realization of an automatic set up to measure electrical characteristic of solid state detectors

    International Nuclear Information System (INIS)

    Manfredotti, C.; Crosetto, D.; Gabutti, A.; Gervino, G.; Varesio, R.

    1986-01-01

    An automatic set-up is described to study electrical properties of silicon detectors for nuclear research. Particularly, I-V characteristics from silicon junction prototype detectors and amorphous samples to test the data acquisition system, are presented. This set-up joins a low cost to good versatility that makes it very useful in wide application ranges in silicon detector electrical characterization

  1. The Related Effects of Item Characteristics in Measures of Epistemological Beliefs

    Science.gov (United States)

    Pope, Kathryn J.; Mooney, Gillian A.

    2016-01-01

    Personal epistemology is concerned with people's beliefs or assumptions about the nature of knowledge and knowing. Whilst contributions in this field can be traced back to the 1970s, fundamental questions about the ontology and epistemology of the construct still remain. The current study explored the effects of three characteristics of questions…

  2. Measurement of Non-Stationary Characteristics of a Landfall Typhoon at the Jiangyin Bridge Site

    Directory of Open Access Journals (Sweden)

    Xuhui He

    2017-09-01

    Full Text Available The wind-sensitive long-span suspension bridge is a vital element in land transportation. Understanding the wind characteristics at the bridge site is thus of great significance to the wind- resistant analysis of such a flexible structure. In this study, a strong wind event from a landfall typhoon called Soudelor recorded at the Jiangyin Bridge site with the anemometer is taken as the research object. As inherent time-varying trends are frequently captured in typhoon events, the wind characteristics of Soudelor are analyzed in a non-stationary perspective. The time-varying mean is first extracted with the wavelet-based self-adaptive method. Then, the non-stationary turbulent wind characteristics, e.g.; turbulence intensity, gust factor, turbulence integral scale, and power spectral density, are investigated and compared with the results from the stationary analysis. The comparison highlights the importance of non-stationary considerations of typhoon events, and a transition from stationarity to non-stationarity for the analysis of wind effects. The analytical results could help enrich the database of non-stationary wind characteristics, and are expected to provide references for the wind-resistant analysis of engineering structures in similar areas.

  3. Measurement of Non-Stationary Characteristics of a Landfall Typhoon at the Jiangyin Bridge Site.

    Science.gov (United States)

    He, Xuhui; Qin, Hongxi; Tao, Tianyou; Liu, Wenshuo; Wang, Hao

    2017-09-22

    The wind-sensitive long-span suspension bridge is a vital element in land transportation. Understanding the wind characteristics at the bridge site is thus of great significance to the wind- resistant analysis of such a flexible structure. In this study, a strong wind event from a landfall typhoon called Soudelor recorded at the Jiangyin Bridge site with the anemometer is taken as the research object. As inherent time-varying trends are frequently captured in typhoon events, the wind characteristics of Soudelor are analyzed in a non-stationary perspective. The time-varying mean is first extracted with the wavelet-based self-adaptive method. Then, the non-stationary turbulent wind characteristics, e.g.; turbulence intensity, gust factor, turbulence integral scale, and power spectral density, are investigated and compared with the results from the stationary analysis. The comparison highlights the importance of non-stationary considerations of typhoon events, and a transition from stationarity to non-stationarity for the analysis of wind effects. The analytical results could help enrich the database of non-stationary wind characteristics, and are expected to provide references for the wind-resistant analysis of engineering structures in similar areas.

  4. Measuring Science Inquiry Skills in Youth Development Programs: The Science Process Skills Inventory

    Directory of Open Access Journals (Sweden)

    Mary E. Arnold

    2013-03-01

    Full Text Available In recent years there has been an increased emphasis on science learning in 4-H and other youth development programs. In an effort to increase science capacity in youth, it is easy to focus only on developing the concrete skills and knowledge that a trained scientist must possess. However, when science learning is presented in a youth-development setting, the context of the program also matters. This paper reports the development and testing of the Science Process Skills Inventory (SPSI and its usefulness for measuring science inquiry skill development in youth development science programs. The results of the psychometric testing of the SPSI indicated the instrument is reliable and measures a cohesive construct called science process skills, as reflected in the 11 items that make up this group of skills. The 11 items themselves are based on the cycle of science inquiry, and represent the important steps of the complete inquiry process.

  5. Photovoltaics (PV) as an Eligible Measure in Residential PACE Programs: Benefits and Challenges (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    Coughlin, J.

    2010-06-01

    Property Assessed Clean Energy (PACE) financing is one of several new financial models broadening access to clean energy by addressing the barrier of initial capital cost. The majority of the PACE programs in the market today include PV as an eligible measure. PV appeals to homeowners as a way to reduce utility bills, self-generate sustainable power, increase energy independence and demonstrate a commitment to the environment. If substantial state incentives for PV exist, PV projects can be economic under PACE, especially when partnered with good net metering policies. At the same time, PV is expensive relative to other eligible measures with a return on investment horizon that might exceed program targets. This fact sheet reviews the benefits and potential challenges of including PV in PACE programs.

  6. Project characteristics monitoring report: BWIP (Basalt Waste Isolation Program) repository project

    Energy Technology Data Exchange (ETDEWEB)

    Friedli, E.A.; Herborn, D.I.; Taylor, C.D.; Tomlinson, K.M.

    1988-03-01

    This monitoring report has been prepared to show compliance with provisions of the Nuclear Waste Policy Act of 1982 (NWPA) and to provide local and state government agencies with information concerning the Basalt Waste Isolation Program (BWIP). This report contains data for the time period May 26, 1986 to February 1988. The data include employment figures, salaries, project purchases, taxes and fees paid, worker survey results, and project closedown personal interview summaries. This information has become particularly important since the decision in December 1987 to stop all BWIP activities except those for site reclamation. The Nuclear Waste Policy Amendments Act of 1987 requires nonreclamation work at the Hanford Site to stop as of March 22, 1988. 7 refs., 6 figs., 28 tabs.

  7. Project characteristics monitoring report: BWIP [Basalt Waste Isolation Program] repository project

    International Nuclear Information System (INIS)

    Friedli, E.A.; Herborn, D.I.; Taylor, C.D.; Tomlinson, K.M.

    1988-03-01

    This monitoring report has been prepared to show compliance with provisions of the Nuclear Waste Policy Act of 1982 (NWPA) and to provide local and state government agencies with information concerning the Basalt Waste Isolation Program (BWIP). This report contains data for the time period May 26, 1986 to February 1988. The data include employment figures, salaries, project purchases, taxes and fees paid, worker survey results, and project closedown personal interview summaries. This information has become particularly important since the decision in December 1987 to stop all BWIP activities except those for site reclamation. The Nuclear Waste Policy Amendments Act of 1987 requires nonreclamation work at the Hanford Site to stop as of March 22, 1988. 7 refs., 6 figs., 28 tabs

  8. Monte Carlo simulations with MENATE program in order to determine the characteristics of neutron multidetector

    International Nuclear Information System (INIS)

    Petrascu, M.; Isbasescu, Alina; Constantinescu, A.; Serban, S.; Stoica, I.V.

    2004-01-01

    The neutron multidetector consists of 81 detectors, made of 4x4x12 cmc BC-400 crystals mounted on XP2972 phototubes. This detector placed in the forward direction at 138 cm from the target, was used to detect the correlated neutrons in the fusion of Li11 halo nuclei with Si targets. To verify the criterion for selecting the true coincidences against cross-talk ( a spurious effect in which the same neutron is registered by two or more detectors) and to establish the optimal distance between adjacent detectors, the program MENATE ( written by P.Desesquelles, IPN - Orsay) was used to generate Monte Carlo neutrons and their interactions in multidetector. The results were analysed with PAW (from CERN Library). (authors)

  9. Measurement of the area of venous ulcers using two software programs 1

    Science.gov (United States)

    Eberhardt, Thaís Dresch; de Lima, Suzinara Beatriz Soares; Lopes, Luis Felipe Dias; Borges, Eline de Lima; Weiller, Teresinha Heck; da Fonseca, Graziele Gorete Portella

    2016-01-01

    ABSTRACT Objective: to compare the measurement area of venous ulcers using AutoCAD(r) and Image Tool software. Method: this was an assessment of reproducibility tests conducted in a angiology clinic of a university hospital. Data were collected from 21 patients with venous ulcers, in the period from March to July of 2015, using a collection form and photograph of wounds. Five nurses (evaluators) of the hospital skin wound study group participated. The wounds were measured using both software programs. Data were analyzed using intraclass correlation coefficient, concordance correlation coefficient and Bland-Altman analysis. The study met the ethical aspects in accordance with current legislation. Results: the size of ulcers varied widely, however, without significant difference between the measurements; an excellent intraclass and concordance correlation was found between both software programs, which seem to be more accurate when measuring a wound area >10 cm². Conclusion: the use of both software programs is appropriate for measurement of venous ulcers, appearing to be more accurate when used to measure a wound area > 10 cm². PMID:27992028

  10. Determination and Interpretation of Characteristic Limits for Radioactivity Measurements: Decision Threshhold, Detection Limit and Limits of the Confidence Interval

    International Nuclear Information System (INIS)

    2017-01-01

    Since 2004, the environment programme of the IAEA has included activities aimed at developing a set of procedures for analytical measurements of radionuclides in food and the environment. Reliable, comparable and fit for purpose results are essential for any analytical measurement. Guidelines and national and international standards for laboratory practices to fulfil quality assurance requirements are extremely important when performing such measurements. The guidelines and standards should be comprehensive, clearly formulated and readily available to both the analyst and the customer. ISO 11929:2010 is the international standard on the determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measuring ionizing radiation. For nuclear analytical laboratories involved in the measurement of radioactivity in food and the environment, robust determination of the characteristic limits of radioanalytical techniques is essential with regard to national and international regulations on permitted levels of radioactivity. However, characteristic limits defined in ISO 11929:2010 are complex, and the correct application of the standard in laboratories requires a full understanding of various concepts. This publication provides additional information to Member States in the understanding of the terminology, definitions and concepts in ISO 11929:2010, thus facilitating its implementation in Member State laboratories.

  11. .A computer program for nuclear lifetimes measurements by DSAM using a self-supporting target

    International Nuclear Information System (INIS)

    Morand, C.; Chan, T.U.

    1981-02-01

    The present Doppler Shift Attenuation Method, for nuclear lifetimes measurements using self supporting target, has already been described. Therefore this paper only mentions the peculiar features of that DSAM, describes several code facilities, comments the subroutines working along the program structure, in order to be easily handled by other physicists

  12. Multiple Measures of Outcome in Assessing a Prison-Based Drug Treatment Program

    Science.gov (United States)

    Prendergast, Michael L.; Hall, Elizabeth A.; Wexler, Harry K.

    2003-01-01

    Evaluations of prison-based drug treatment programs typically focus on one or two dichotomous outcome variables related to recidivism. In contrast, this paper uses multiple measures of outcomes related to crime and drug use to examine the impact of prison treatment. Crime variables included self-report data of time to first illegal activity,…

  13. WINDOWS: a program for the analysis of spectral data foil activation measurements

    International Nuclear Information System (INIS)

    Stallmann, F.W.; Eastham, J.F.; Kam, F.B.K.

    1978-12-01

    The computer program WINDOWS together with its subroutines is described for the analysis of neutron spectral data foil activation measurements. In particular, the unfolding of the neutron differential spectrum, estimated windows and detector contributions, upper and lower bounds for an integral response, and group fluxes obtained from neutron transport calculations. 116 references

  14. 49 CFR 192.945 - What methods must an operator use to measure program effectiveness?

    Science.gov (United States)

    2010-10-01

    ... (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Gas Transmission Pipeline Integrity Management § 192.945 What methods must an operator use to measure program...

  15. WINDOWS: a program for the analysis of spectral data foil activation measurements

    Energy Technology Data Exchange (ETDEWEB)

    Stallmann, F.W.; Eastham, J.F.; Kam, F.B.K.

    1978-12-01

    The computer program WINDOWS together with its subroutines is described for the analysis of neutron spectral data foil activation measurements. In particular, the unfolding of the neutron differential spectrum, estimated windows and detector contributions, upper and lower bounds for an integral response, and group fluxes obtained from neutron transport calculations. 116 references. (JFP)

  16. Technical Performance Measurement, Earned Value, and Risk Management: An Integrated Diagnostic Tool for Program Management

    National Research Council Canada - National Science Library

    Pisano, N

    2002-01-01

    ...(A)), is known as the Navy PEO(A) Technical Performance Measurement (TPM) System. A retrospective analysis was conducted on the T45TS Cockpit-21 program and real-time test implementations are being conducted on the Federal Aviation Administration's (FAA...

  17. Evaluating Performance Measurement Systems in Nonprofit Agencies: The Program Accountability Quality Scale (PAQS).

    Science.gov (United States)

    Poole, Dennis L.; Nelson, Joan; Carnahan, Sharon; Chepenik, Nancy G.; Tubiak, Christine

    2000-01-01

    Developed and field tested the Performance Accountability Quality Scale (PAQS) on 191 program performance measurement systems developed by nonprofit agencies in central Florida. Preliminary findings indicate that the PAQS provides a structure for obtaining expert opinions based on a theory-driven model about the quality of proposed measurement…

  18. Questioning the Use of Outcome Measures to Evaluate Principal Preparation Programs

    Science.gov (United States)

    Fuller, Ed; Hollingworth, Liz

    2018-01-01

    Policymakers are proposing the use of outcome measures as indicators of effective principal preparation programs. The three most common metrics recommended are: (1) graduates' effectiveness in improving student achievement test scores, (2) graduate job placement rates, and (3) principal job retention once employed. This article explores the use of…

  19. The Profile of a School and Measurement of a Multi-School Organization Change Program.

    Science.gov (United States)

    Feitler, Fred C.

    Modern organization theory and research from business and industry predicts that schools which change toward the Likert participative group organizations will increase productivity. This paper reports interventions of a one-year organization development program carried out with 12 schools and the change results measured by the Profile of a School.…

  20. Measuring Pre-Kindergarten Teachers' Perceptions: Compliance with the High/Scope Program

    Science.gov (United States)

    Palenzuela, Silvia M.

    2004-01-01

    The research study examined the relationship between pre-kindergarten teachers' age and years of experience with their perceptions and their actual compliance with the norms of the High/Scope Pre-kindergarten Program. Teachers' perceptions of satisfaction with the supervisory relationship were measured by the Early Childhood Job Satisfaction…

  1. 75 FR 11624 - Highway Safety Programs; Conforming Products List of Evidential Breath Alcohol Measurement Devices

    Science.gov (United States)

    2010-03-11

    ... X PBA 3000[dash]P X X PBA 3000C X X Alcohol Data Sensor X X Phoenix X X Phoenix 6.0 X X EV 30 X X FC...-0016] Highway Safety Programs; Conforming Products List of Evidential Breath Alcohol Measurement... 71480) for instruments that conform to the Model Specifications for Evidential Breath Alcohol...

  2. Ideality factor of GaN-based light-emitting diodes determined by the measurement of photovoltaic characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyun-Joong; Ryu, Geun-Hwan; Yang, Won-Bo; Ryu, Han-Youl [Inha University, Incheon (Korea, Republic of)

    2014-11-15

    We present a method for determining the ideality factor of GaN-based light-emitting diodes (LEDs) by using the measured photovoltaic characteristics. The relation between the short-circuit current and the open-circuit voltage is obtained as the incident power of a laser diode emitting at 405 nm is varied, which is used to determine the ideality factor of the LED. From the photovoltaic measurements, the ideality factors of a blue and a green LED are determined to be 1.16 and 1.78, respectively. The ideality factors obtained by using the photovoltaic measurement are found to be much smaller than those obtained by using the I - V curve without illumination, which is believed to result from the different carrier generation and transport mechanisms. Investigating the photovoltaic characteristics of GaN-based LEDs is expected to provide insight into the origin of the high diode ideality factor in GaN-based devices.

  3. Ideality factor of GaN-based light-emitting diodes determined by the measurement of photovoltaic characteristics

    International Nuclear Information System (INIS)

    Kim, Hyun-Joong; Ryu, Geun-Hwan; Yang, Won-Bo; Ryu, Han-Youl

    2014-01-01

    We present a method for determining the ideality factor of GaN-based light-emitting diodes (LEDs) by using the measured photovoltaic characteristics. The relation between the short-circuit current and the open-circuit voltage is obtained as the incident power of a laser diode emitting at 405 nm is varied, which is used to determine the ideality factor of the LED. From the photovoltaic measurements, the ideality factors of a blue and a green LED are determined to be 1.16 and 1.78, respectively. The ideality factors obtained by using the photovoltaic measurement are found to be much smaller than those obtained by using the I - V curve without illumination, which is believed to result from the different carrier generation and transport mechanisms. Investigating the photovoltaic characteristics of GaN-based LEDs is expected to provide insight into the origin of the high diode ideality factor in GaN-based devices.

  4. Sensors Based Measurement Techniques of Fuel Injection and Ignition Characteristics of Diesel Sprays in DI Combustion System

    Directory of Open Access Journals (Sweden)

    S. Rehman

    2016-09-01

    Full Text Available Innovative sensor based measurement techniques like needle lift sensor, photo (optical sensor and piezoresistive pressure transmitter are introduced and used to measure the injection and combustion characteristics in direct injection combustion system. Present experimental study is carried out in the constant volume combustion chamber to study the ignition, combustion and injection characteristics of the solid cone diesel fuel sprays impinging on the hot surface. Hot surface ignition approach has been used to create variety of advanced combustion systems. In the present study, the hot surface temperatures were varied from 623 K to 723 K. The cylinder air pressures were 20, 30 and 40 bar and fuel injection pressures were 100, 200 and 300 bar. It is found that ignition delay of fuel sprays get reduced with the rise in injection pressure. The ignition characteristics of sprays much less affected at high fuel injection pressures and high surface temperatures. The fuel injection duration reduces with the increase in fuel injection pressures. The rate of heat release becomes high at high injection pressures and it decreases with the increase in injection duration. It is found that duration of burn/combustion decrease with the increase in injection pressure. The use of various sensors is quite effective, reliable and accurate in measuring the various fuel injection and combustion characteristics. The study simulates the effect of fuel injection system parameters on combustion performance in large heavy duty engines.

  5. Scoping out the literature on mobile needle and syringe programs-review of service delivery and client characteristics, operation, utilization, referrals, and impact.

    Science.gov (United States)

    Strike, Carol; Miskovic, Miroslav

    2018-02-08

    Needle and syringe program (NSP) service delivery models encompass fixed sites, mobile services, vending machines, pharmacies, peer NSPs, street outreach, and inter-organizational agreements to add NSP services to other programs. For programs seeking to implement or improve mobile services, access to a synthesis of the evidence related to mobile services is beneficial, but lacking. We used a scoping study method to search MEDLINE, PSYCHInfo, Embase, Scopus, and Sociological for relevant literature. We identified 39 relevant manuscripts published between 1975 and November 2017 after removing duplicates and non-relevant manuscripts from the 1313 identified by the search. Charting of the data showed that these publications reported findings related to the service delivery model characteristics, client characteristics, service utilization, specialized interventions offered on mobile NSPs, linking clients to other services, and impact on injection risk behaviors. Mobile NSPs are implemented in high-, medium-, and low-income countries; provide equipment distribution and many other harm reduction services; face limitations to service complement, confidentiality, and duration of interactions imposed by physical space; adapt to changes in locations and types of drug use; attract people who engage in high-risk/intensity injection behavior and who are often not reached by other service models; and may lead to reduced injection-related risks. It is not clear from the literature reviewed, what are, or if there are, a "core and essential" complement of services that mobile NSPs should offer. Decisions about service complement for mobile NSPs need to be made in relation to the context and also other available services. Reports of client visits to mobile NSP provide a picture of the volume and frequency of utilization but are difficult to compare given varied measures and reference periods. Mobile NSPs have an important role to play in improving HIV and HCV prevention efforts

  6. OSMOSE program : statistical review of oscillation measurements in the MINERVE reactor R1-UO2 configuration.

    Energy Technology Data Exchange (ETDEWEB)

    Stoven, G.; Klann, R.; Zhong, Z.; Nuclear Engineering Division

    2007-08-28

    The OSMOSE program is a collaboration on reactor physics experiments between the United States Department of Energy and the France Commissariat Energie Atomique. At the working level, it is a collaborative effort between the Argonne National Laboratory and the CEA Cadarache Research Center. The objective of this program is to measure very accurate integral reaction rates in representative spectra for the actinides important to future nuclear system designs, and to provide the experimental data for improving the basic nuclear data files. The main outcome of the OSMOSE measurement program will be an experimental database of reactivity-worth measurements in different neutron spectra for the heavy nuclides. This database can then be used as a benchmark to verify and validate reactor analysis codes. The OSMOSE program (Oscillation in Minerve of isotopes in Eupraxic Spectra) aims at improving neutronic predictions of advanced nuclear fuels through oscillation measurements in the MINERVE facility on samples containing the following separated actinides: {sup 232}Th, {sup 233}U, {sup 234}U, {sup 235}U, {sup 236}U, {sup 238}U, {sup 237}Np, {sup 238}Pu, {sup 239}Pu, {sup 240}Pu, {sup 241}Pu, {sup 242}Pu, {sup 241}Am, {sup 243}Am, {sup 244}Cm, and {sup 245}Cm. The first part of this report provides an overview of the experimental protocol and the typical processing of a series of experimental results which is currently performed at CEA-Cadarache. In the second part of the report, improvements to this technique are presented, as well as the program that was created to process oscillation measurement results from the MINERVE facility in the future.

  7. Measurement and analysis of time-domain characteristics of corona-generated radio interference from a single positive corona source

    Science.gov (United States)

    Li, Xuebao; Li, Dayong; Chen, Bo; Cui, Xiang; Lu, Tiebing; Li, Yinfei

    2018-04-01

    The corona-generated electromagnetic interference commonly known as radio interference (RI) has become a limiting factor for the design of high voltage direct current transmission lines. In this paper, a time-domain measurement system is developed to measure the time-domain characteristics of corona-generated RI from a single corona source under a positive corona source. In the experiments, the corona current pulses are synchronously measured through coupling capacitors. The one-to-one relationship between the corona current pulse and measured RI voltage pulse is observed. The statistical characteristics of pulse parameters are analyzed, and the correlations between the corona current pulse and RI voltage pulse in the time-domain and frequency-domain are analyzed. Depending on the measured corona current pulses, the time-domain waveform of corona-generated RI is calculated on the basis of the propagation model of corona current on the conductor, the dipolar model for electric field calculation, and the antenna model for inducing voltage calculation. The well matched results between measured and simulated waveforms of RI voltage can show the validity of the measurement and calculation method presented in this paper, which also further show the close correlation between corona current and corona-generated RI.

  8. Newly developed hardness testing system, "Cariotester": measurement principles and development of a program for measuring Knoop hardness of carious dentin.

    Science.gov (United States)

    Shimizu, Akihiko; Nakashima, Syozi; Nikaido, Toru; Sugawara, Toyotaro; Yamamoto, Takatsugu; Momoi, Yasuko

    2013-01-01

    We previously discovered that when a cone-shaped indenter coated with paint was pressed into an object, the paint disappeared in accordance with the depth of the indentation. Based on this fact, we developed the Cariotester, a portable system for measuring the Knoop hardness (KHN) of carious dentin. The Cariotester is composed of a handpiece with an indenter, a microscope, and a computer. In this system, the painted indenter is forced into the material with a 150-gf load, and the indentation depth (CT depth) is obtained from the paint disappearance. The CT depth by the Cariotester and the KHN by a microhardness tester were determined at 14 dentin regions. From the data, a program was created to convert the CT depth of the carious dentin into the KHN. As a result, if the CT depth is measured with this system, the KHN of carious dentin can be displayed in real time.

  9. Non-linear Characteristic Modeling of Frictional Suspension Using Measured Data

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Chang Gyu; Jang, Jin Seok; Jin, Jae Hoon; Yoo, Wan Suk [Pusan National University, Busan (Korea, Republic of)

    2015-01-15

    Large-capacity of household washing machine can become unbalanced during the dehydration process. To solve this problem, several types of suspensions have been installed in a washing machine. In this study, physical tests were carried out on a frictional suspension, and the nonlinear characteristics were modeled by combining several simple physical models. The parameters were estimated based on the least squares solution. The simulation and test results were compared to verify the validity of the friction damper model.

  10. Measurement and analysis of channel attenuation characteristics for an implantable galvanic coupling human-body communication.

    Science.gov (United States)

    Zhang, Shuang; Pun, Sio Hang; Mak, Peng Un; Qin, Yu-Ping; Liu, Yi-He; Vai, Mang I

    2016-11-14

    In this study, an experiment was designed to verify the low power consumption of galvanic coupling human-body communication. A silver electrode (silver content: 99%) is placed in a pig leg and a sine wave signal with the power of 0 dBm is input. Compared with radio frequency communication and antenna transmission communication, attenuation is reduced by approximately 10 to 15 dB, so channel characteristics are highly improved.

  11. Measurement of Non-Stationary Characteristics of a Landfall Typhoon at the Jiangyin Bridge Site

    OpenAIRE

    He, Xuhui; Qin, Hongxi; Tao, Tianyou; Liu, Wenshuo; Wang, Hao

    2017-01-01

    The wind-sensitive long-span suspension bridge is a vital element in land transportation. Understanding the wind characteristics at the bridge site is thus of great significance to the wind- resistant analysis of such a flexible structure. In this study, a strong wind event from a landfall typhoon called Soudelor recorded at the Jiangyin Bridge site with the anemometer is taken as the research object. As inherent time-varying trends are frequently captured in typhoon events, the wind characte...

  12. Method and apparatus for measuring neutron characteristics of material surrounding a borehole

    International Nuclear Information System (INIS)

    Hopkinson, E.C.

    1983-01-01

    This invention relates to methods and apparatus for determining the macroscopic thermal neutron absorption cross section of the formations surrounding a borehole as determined by radiation measurements using optimized measurement intervals. A measurement of the decline of the thermal neutron population in the formation is derived by counting the detected radiation within a first pair of measurement intervals occurring at a fixed time after the neutron burst. A ratio of the two counting rates provides the rate of change over the selected time interval. The counting ratio is converted into a natural logarithm representative of the Sigma calculation

  13. Knowledge is power: Customer load metering in the Victorian End-Use Measurement Program

    Energy Technology Data Exchange (ETDEWEB)

    Gavin, G. [CitiPower Ltd., Melbourne, VIC (Australia)

    1995-12-31

    The Victorian End-Use Measurement Program is a sophisticated load metering program being conducted over 500 sites in Victoria, covering the major customer sectors of residential, commercial and industrial. Its goal is to gather sufficient data to determine with statistical accuracy the load profiles of these major sectors, together with the load profiles of selected customer end-uses in the residential and commercial sectors, and selected building types in the commercial sector. This paper discusses the major elements of the program, the history of its development, the design of the statistical and operational components of the program, and its implementation in the field. In the Victorian electricity industry, with the combination of contestable customer metering and the End-Use Measurement program metering for the franchise/non-contestable market, there is now a considerable flow of customer load data. The opportunity exists for an accurate understanding of customer load needs, and the minimization of risk in business operations in the retail and wholesale market. (author).

  14. SPSS programs for the measurement of nonindependence in standard dyadic designs.

    Science.gov (United States)

    Alferes, Valentim R; Kenny, David A

    2009-02-01

    Dyadic research is becoming more common in the social and behavioral sciences. The most common dyadic design is one in which two persons are measured on the same set of variables. Very often, the first analysis of dyadic data is to determine the extent to which the responses of the two persons are correlated-that is, whether there is nonindependence in the data. We describe two user-friendly SPSS programs for measuring nonindependence of dyadic data. Both programs can be used for distinguishable and indistinguishable dyad members. Inter1.sps is appropriate for interval measures. Inter2.sps applies to categorical variables. The SPSS syntax and data files related to this article may be downloaded as supplemental materials from brm.psychonomic-journals.org/content/supplemental.

  15. A computer program (COSTUM) to calculate confidence intervals for in situ stress measurements. V. 1

    International Nuclear Information System (INIS)

    Dzik, E.J.; Walker, J.R.; Martin, C.D.

    1989-03-01

    The state of in situ stress is one of the parameters required both for the design and analysis of underground excavations and for the evaluation of numerical models used to simulate underground conditions. To account for the variability and uncertainty of in situ stress measurements, it is desirable to apply confidence limits to measured stresses. Several measurements of the state of stress along a borehole are often made to estimate the average state of stress at a point. Since stress is a tensor, calculating the mean stress and confidence limits using scalar techniques is inappropriate as well as incorrect. A computer program has been written to calculate and present the mean principle stresses and the confidence limits for the magnitudes and directions of the mean principle stresses. This report describes the computer program, COSTUM

  16. Evaluation of an integrated adherence program aimed to increase Medicare Part D star rating measures.

    Science.gov (United States)

    Leslie, R Scott; Tirado, Breanne; Patel, Bimal V; Rein, Philip J

    2014-12-01

    The Centers for Medicare Medicaid Services (CMS) Plan Quality and Performance Program, or Star Ratings Program, allows Medicare beneficiaries to compare quality of care among available Medicare Advantage prescription drug (MA-PD) plans and stand-alone prescription drug plans (PDPs). Health plans have increased intervention efforts and applied existing care management infrastructure as an approach to improving member medication adherence and subsequent Part D star rating performance. Independent Care Health Plan (iCare), an MA-PD plan; MedImpact Healthcare Systems, Inc. (MedImpact), a pharmacy benefits manager; and US MED, a mail order pharmacy, partnered to engage and enroll iCare's dual-eligible special needs population in an intervention designed to improve patient medication adherence and health plan performance for 3 Part D patient safety outcome measures: Medication Adherence for Oral Diabetes Medications (ODM), Medication Adherence for Hypertension (HTN), and Medication Adherence for Cholesterol (CHOL). To (a) assess the effectiveness of a coordinated member-directed medication adherence intervention and (b) determine the overall impact of the intervention on adherence rates and CMS Part D star rating adherence measures.  Administrative pharmacy claims and health plan eligibility data from MedImpact's databases were used to identify members using 3 target medication classes. Adherence was estimated by the proportion of days covered (PDC) for all members. Those members considered at high risk for nonadherence were prioritized for care management services. Risk factors were based on members' use of more than 1 target medication class, newly started therapy, and suboptimal adherence (PDC  less than  80%) in the most recent 6-month period. Data files listing member adherence rates and contact information were formatted and loaded monthly into iCare's care management system, which triggered an alert for care coordinators to counsel members on the importance

  17. On-Chip Method to Measure Mechanical Characteristics of a Single Cell by Using Moiré Fringe

    Directory of Open Access Journals (Sweden)

    Hirotaka Sugiura

    2015-06-01

    Full Text Available We propose a method to characterize the mechanical properties of cells using a robot-integrated microfluidic chip (robochip and microscopy. The microfluidic chip is designed to apply the specified deformations to a single detached cell using an on-chip actuator probe. The reaction force is simultaneously measured using an on-chip force sensor composed of a hollow folded beam and probe structure. In order to measure the cellular characteristics in further detail, a sub-pixel level of resolution of probe position is required. Therefore, we utilize the phase detection of moiré fringe. Using this method, the experimental resolution of the probe position reaches 42 nm. This is approximately ten times smaller than the optical wavelength, which is the limit of sharp imaging with a microscope. Calibration of the force sensor is also important in accurately measuring cellular reaction forces. We calibrated the spring constant from the frequency response, by the proposed sensing method of the probe position. As a representative of mechanical characteristics, we measured the elastic modulus of Madin-Darby Cannie Kidney (MDCK cells. In spite of the rigid spring constant, the resolution and sensitivity were twice that achieved in our previous study. Unique cellular characteristics can be elucidated by the improvements in sensing resolution and accuracy.

  18. Measurement of Health Program Equity Made Easier: Validation of a Simplified Asset Index Using Program Data From Honduras and Senegal.

    Science.gov (United States)

    Ergo, Alex; Ritter, Julie; Gwatkin, Davidson R; Binkin, Nancy

    2016-03-01

    Equitable access to programs and health services is essential to achieving national and international health goals, but it is rarely assessed because of perceived measurement challenges. One of these challenges concerns the complexities of collecting the data needed to construct asset or wealth indices, which can involve asking as many as 40 survey questions, many with multiple responses. To determine whether the number of variables and questions could be reduced to a level low enough for more routine inclusion in evaluations and research without compromising programmatic conclusions, we used data from a program evaluation in Honduras that compared a pro-poor intervention with government clinic performance as well as data from a results-based financing project in Senegal. In both, the full Demographic and Health Survey (DHS) asset questionnaires had been used as part of the evaluations. Using the full DHS results as the "gold standard," we examined the effect of retaining successively smaller numbers of variables on the classification of the program clients in wealth quintiles. Principal components analysis was used to identify those variables in each country that demonstrated minimal absolute factor loading values for 8 different thresholds, ranging from 0.05 to 0.70. Cohen's kappa statistic was used to assess correlation. We found that the 111 asset variables and 41 questions in the Honduras DHS could be reduced to 9 variables, captured by only 8 survey questions (kappa statistic, 0.634), without substantially altering the wealth quintile distributions for either the pro-poor program or the government clinics or changing the resulting policy conclusions. In Senegal, the 103 asset variables and 36 questions could be reduced to 32 variables and 20 questions (kappa statistic, 0.882) while maintaining a consistent mix of users in each of the 2 lowest quintiles. Less than 60% of the asset variables in the 2 countries' full DHS asset indices overlapped, and in none of

  19. Use of a W-band polarimeter to measure microphysical characteristics of clouds

    Science.gov (United States)

    Galloway, John Charles

    1997-08-01

    This dissertation presents W-Band measurements of the copolar correlation co-efficient and Doppler spectrum taken from the University of Wyoming King Air research airplane. These measurements demonstrate the utility of making W-Band polarimetric and Doppler spectrum measurements from an airborne platform in investigations of cloud microphysical properties. Comparison of copolar correlation coefficient measurements with aircraft in situ probe measurements verifies that polarimetric measurements indicate phase transitions, and hydrometeor alignment in ice clouds. Melting layers in clouds were measured by the W-Band system on board the King Air during 1992 and 1994. Both measurements established the use of the linear depolarization ratio, LDR, to locate the melting layer using an airborne W-Band system. The measurement during 1994 allowed direct comparison of the magnitude of the copolar correlation coefficient with the values of LDR. The relation between the measurements corresponds with a predicted relationship between the two parameters for observation of particles exhibiting isotropy in the plane of polarization. Measurements of needle crystals at horizontal and vertical incidence provided further evidence that the copolar correlation coefficient values agreed with the expected response from hydrometeors possessing a preferred alignment for the side looking case, and hydrometeors without a preferred alignment for the vertical incidence case. Observation of significant specific differential phase at vertical incidence, the first reported at W-Band, corresponded to a significant increase in differential reflectivity overhead, which was most likely produced by hydrometeor alignment driven by cloud electrification. Comparison of the drop size distributions estimated using the Doppler spectra with those measured by the wingtip probes on the King Air reveals that the radar system is better suited under some liquid cloud conditions to provide microphysical measurements

  20. Hydrocarbon emissions from gas engine CHP-units. 2011 measurement program

    Energy Technology Data Exchange (ETDEWEB)

    Van Dijk, G.H.J. [KEMA, Arnhem (Netherlands)

    2012-06-15

    In December 2009, the Ministry of Infrastructure and Environment (IandM) issued the Decree on Emission Limits for Middle Sized Combustion Installations (BEMS). This decree imposes a first-time emission limit value (ELV) of 1500 mg C/m{sup 3}{sub o} at 3% O{sub 2} for hydrocarbons emitted by gas engines. IandM used the findings of two hydrocarbon emission measurement programs, executed in 2007 and 2009, as a guideline for this initial ELV. The programs did reveal substantial variation in the hydrocarbon emissions of the gas engines tested. This variation, and especially the uncertainty as to the role of engine and/or other parameters causing such variation, was felt to hamper further policy development. IandM therefore commissioned KEMA to perform follow-up measurements on ten gas engine CHP-units in 2011. Aim of this 2011 program is to assess hydrocarbon emission variation in relation to engine parameters and process conditions including maintenance status, and to atmospheric conditions. The 2011 program comprised two identical measurement sessions, one in spring and one in winter.