Mobile Uninterruptible Power Supply
Mears, Robert L.
1990-01-01
Proposed mobile unit provides 20 kVA of uninterruptible power. Used with mobile secondary power-distribution centers to provide power to test equipment with minimal cabling, hazards, and obstacles. Wheeled close to test equipment and system being tested so only short cable connections needed. Quickly moved and set up in new location. Uninterruptible power supply intended for tests which data lost or equipment damaged during even transient power failure.
EU ENERGY STAR Certified Uninterruptible Power Supplies
Certified models meet all ENERGY STAR requirements as listed in the Version 1.0 ENERGY STAR Program Requirements for Uninterruptible Power Supplies that are effective as of August 1, 2012. A detailed listing of key efficiency criteria are available at http://www.energystar.gov/index.cfm?c=uninterruptible_power_supplies.pr_crit_uninterruptible_power_supplies
ENERGY STAR Certified Uninterruptible Power Supplies
Certified models meet all ENERGY STAR requirements as listed in the Version 1.0 ENERGY STAR Program Requirements for Uninterruptible Power Supplies that are effective as of August 1, 2012. A detailed listing of key efficiency criteria are available at http://www.energystar.gov/index.cfm?c=uninterruptible_power_supplies.pr_crit_uninterruptible_power_supplies
Spatio-temporal observations of tertiary ozone maximum
V. F. Sofieva
2009-03-01
Full Text Available We present spatio-temporal distributions of tertiary ozone maximum (TOM, based on GOMOS (Global Ozone Monitoring by Occultation of Stars ozone measurements in 2002–2006. The tertiary ozone maximum is typically observed in the high-latitude winter mesosphere at altitude ~72 km. Although the explanation for this phenomenon has been found recently – low concentrations of odd-hydrogen cause the subsequent decrease in odd-oxygen losses – models have had significant deviations from existing observations until recently. Good coverage of polar night regions by GOMOS data has allowed for the first time obtaining spatial and temporal observational distributions of night-time ozone mixing ratio in the mesosphere.
The distributions obtained from GOMOS data have specific features, which are variable from year to year. In particular, due to a long lifetime of ozone in polar night conditions, the downward transport of polar air by the meridional circulation is clearly observed in the tertiary ozone maximum time series. Although the maximum tertiary ozone mixing ratio is achieved close to the polar night terminator (as predicted by the theory, TOM can be observed also at very high latitudes, not only in the beginning and at the end, but also in the middle of winter. We have compared the observational spatio-temporal distributions of tertiary ozone maximum with that obtained using WACCM (Whole Atmosphere Community Climate Model and found that the specific features are reproduced satisfactorily by the model.
Since ozone in the mesosphere is very sensitive to HO_{x} concentrations, energetic particle precipitation can significantly modify the shape of the ozone profiles. In particular, GOMOS observations have shown that the tertiary ozone maximum was temporarily destroyed during the January 2005 and December 2006 solar proton events as a result of the HO_{x} enhancement from the increased ionization.
ENERGY STAR Certified Uninterruptible Power Supplies
U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 1.0 ENERGY STAR Program Requirements for Uninterruptible Power Supplies that are...
THE CONCEPT OF UNINTERRUPTED POWER SUPPLY SYSTEMS
Grigorash O. V.
2016-05-01
Full Text Available We have revealed the main reasons for interruptions in power supply to consumers of electricity. To improve the reliability and the efficiency of power supply for responsible consumers, we have proposed to develop energy efficient combined energy-saving systems for uninterrupted power supply with use of renewable energy sources. The article lists major principles of the development of such systems; it shows the necessity of constructing a generalized schema that contains the possible types and the sources of electric power converters. It also reveals the modern requirements to systems of uninterrupted energy supply. To improve the operational and technical characteristics of the uninterruptible power supply, it has been proposed to use a new circuitry that includes a contactless power generators, the direct frequency converters used to stabilize the voltage and frequency of the current generators of wind turbines, static converters made with the use of single-phase transformers with rotating magnetic field, universal static converters that can operate in the regimes of known types of converters. The article presents features of the modular construction of systems of uninterrupted energy supply and optimization of their structural decisions on key performance criteria. It shows the algorithm of synthesis of structural designs of combined systems of uninterrupted power supply. An important step for further research with the aim of improving operational and technical characteristics of the combination of uninterrupted power supply systems is the mathematical modeling of physical processes in power circuits of the system in both normal and emergency modes of operation
Active Rectifier for Uninterruptable Power Supply
Stepanov, Andrew; Bogdans, Valdis; Suskis, Pavel; Galkin, Ilya
2010-01-01
The paper contains analysis of power factor correction circuits that is made in the context of elaboration of uninterruptable power supply system. Various correctors have been estimated analytically, by means of simulation and experimentally. The most significant attention has been paid to the efficiency of the analyzed converters and their compatibility with modular approach to development of power converters.
SOURCES OF UNINTERRUPTED AND AUTONOMOUS POWER SUPPLY
Denisenko E. A.
2016-01-01
Full Text Available The article describes the main block diagrams of three types of uninterruptible power supply: backup; interactive; double conversion. The main functions are: the function backup or emergency source of electrical power; the function of protective devices (from an overload currents and short-circuit; improving the quality of the power supply voltage. Alsoб we have disclosed the features of the advantages and disadvantages of uninterruptible power supplies three groups: Off-Line / Stand-By / back-up UPS (passive - reserve; Line-Interactive (line interactive type; On-Line. The article discloses new approaches to structural and schematic-based uninterruptible power supply, including at use of renewable energy, so that the failure of one of the sources does not lead to exit from the operation of the entire of power supply system. As a rule, such systems are built on a modular principle. It is shown that now for remote users from external networks is advisable to apply a system autonomous power supply, representing the totality of sources and converters of electric power, ensuring uninterrupted power supply to consumers. We have presented a typical structure of autonomous systems and given an option of the block diagram of the system and are given explanations and principles of its work. Significantly improves performance reliability of autonomous systems using the modularity of its main functional units. In addition, to increase the efficiency of the system can be through the use in the construction of transformers with static converters rotating magnetic field. To improve the weight, which is important for the transport systems, it is necessary to use links with the intermediate high-frequency electric power conversion in static converters
Novel Reduced Parts Online Uninterruptible Power Supply
Bahram Ashrafi; Mehdi Niroomand
2012-01-01
This paper presents design consideration and performance analysis of novel reduced parts online three-phase uninterruptible power supply (UPS) system. The proposed UPS system is based on reduced switch count dual bridge matrix converter. It employs only six power switches and results in reducing the cost of the system compared to conventional online UPS topologies, while achieving excellent performance. The performance of the proposed system is evaluated through simulation in terms of input/o...
Novel Reduced Parts Online Uninterruptible Power Supply
Bahram Ashrafi
2012-01-01
Full Text Available This paper presents design consideration and performance analysis of novel reduced parts online three-phase uninterruptible power supply (UPS system. The proposed UPS system is based on reduced switch count dual bridge matrix converter. It employs only six power switches and results in reducing the cost of the system compared to conventional online UPS topologies, while achieving excellent performance. The performance of the proposed system is evaluated through simulation in terms of input/output waveforms quality and shows the viability of topology.
Microstructure and microdynamics of uninterrupted traffic flow
Gavrilov, Konstantin L.
1997-10-01
In this paper, ``uninterrupted homogeneous traffic flow'' is viewed as a dynamic system of spontaneously aggregating and breaking clusters of cars. This approach gives qualitative and quantitative descriptions of density fluctuations and dynamics of free traffic flow in terms of car clusters, and their distributions with respect to the number of cars in a cluster. The distributions have a nontrivial shape and a nonlinear dependence on the density of cars on the expressway. Their shape and evolution as a function of car density are described adequately by a model proposed here. This one-parameter model based on a modified Smoluchowski equation predicts a critical density at which a phase transition occurs from free to synchronized traffic flow for a multilane expressway: ρcr=16+/-3 vehicles km-1 (lane)-1, and that below this critical density traffic flow can be treated as a one-dimensional system. The model may also find application in the study of the low density pneumatic transport of granular and powdered materials.
Jung-Min Kwon
2013-01-01
A composite energy storage system (CESS) that includes a photovoltaic (PV) power generation and an uninterruptible power supply (UPS) function is proposed. This system has three operating modes, namely, a grid-connected inverter mode, a grid-connected rectifier mode, and an islanding mode. This system is composed of a boost converter, a three-phase inverter/rectifier, a bidirectional DC/DC converter, and thyristor switches. The boost converter extracts maximum power from the PV panels and sen...
Fault tolerant system design for uninterruptible power supplies
B. Y. Volochiy; D. S. Kuznetsov
2012-01-01
The problem of design for reliability of a fault tolerant system for uninterruptible power supplies is considered. Configuration of a fault tolerant system determines the structure of an uninterruptible power supply: power supply built from modules of the same type, stand-by sliding reserve for them, twice total reserve of the power supply with two accumulator batteries, the controls and diagnostics means. The developed tool for automated analytical model of fault tolerant systems generation ...
Ultracapacitor-Based Uninterrupted Power Supply System
Eichenberg, Dennis J.
2011-01-01
The ultracapacitor-based uninterrupted power supply (UPS) system enhances system reliability; reduces life-of-system, maintenance, and downtime costs; and greatly reduces environmental impact when compared to conventional UPS energy storage systems. This design provides power when required and absorbs power when required to smooth the system load and also has excellent low-temperature performance. The UPS used during hardware tests at Glenn is an efficient, compact, maintenance-free, rack-mount, pure sine-wave inverter unit. The UPS provides a continuous output power up to 1,700 W with a surge rating of 1,870 W for up to one minute at a nominal output voltage of 115 VAC. The ultracapacitor energy storage system tested in conjunction with the UPS is rated at 5.8 F. This is a bank of ten symmetric ultracapacitor modules. Each module is actively balanced using a linear voltage balancing technique in which the cell-to-cell leakage is dependent upon the imbalance of the individual cells. The ultracapacitors are charged by a DC power supply, which can provide up to 300 VDC at 4 A. A constant-voltage, constant-current power supply was selected for this application. The long life of ultracapacitors greatly enhances system reliability, which is significant in critical applications such as medical power systems and space power systems. The energy storage system can usually last longer than the application, given its 20-year life span. This means that the ultracapacitors will probably never need to be replaced and disposed of, whereas batteries require frequent replacement and disposal. The charge-discharge efficiency of rechargeable batteries is approximately 50 percent, and after some hundreds of charges and discharges, they must be replaced. The charge-discharge efficiency of ultracapacitors exceeds 90 percent, and can accept more than a million charges and discharges. Thus, there is a significant energy savings through the efficiency improvement, and there is far less
The maximum glitch observed in a pulsar systematically constrains its mass
Pizzochero, Pierre; Haskell, Brynmor; Seveso, Stefano
2016-01-01
Pulsar glitches, sudden jumps in frequency in otherwise steadily spinning down radio pulsars, offer a unique glimpse into the superfluid interior of neutron stars. The exact trigger of these events remains, however, elusive and this has hampered attempts to use glitch observations to constrain fundamental physics. In this paper we propose a new method to measure the mass of glitching pulsars, using observations of the maximum glitch recorded in a star, together with state of the art microphysical models of the pinning interaction between superfluid vortices and ions in the crust. Studying systematically all the presently observed large glitchers, we find an inverse correlation between size of the maximum glitch and the pulsar mass. Our procedure will allow current and future observations of glitching pulsars to constrain not only the physics of glitch models but also the equation of state of dense matter in neutron star interiors.
Fault tolerant system design for uninterruptible power supplies
B. Y. Volochiy
2012-02-01
Full Text Available The problem of design for reliability of a fault tolerant system for uninterruptible power supplies is considered. Configuration of a fault tolerant system determines the structure of an uninterruptible power supply: power supply built from modules of the same type, stand-by sliding reserve for them, twice total reserve of the power supply with two accumulator batteries, the controls and diagnostics means. The developed tool for automated analytical model of fault tolerant systems generation and illustration of its capabilities in determination of requirements for repair service and accumulator batteries are given.
SYNTHESIS OF MODULAR UNINTERRUPTED POWER SUPPLY SYSTEMS WITH INCREASED RELIABILITY
Grigorash O. V.
2015-04-01
Full Text Available The level of technical development today requires the creation of highly effective, including reliable, uninter-rupted power supply systems. We have shown modern requirements and design features of modern systems of uninterruptible power supply, which should be built on a modular principle. It is shown that the problem of synthesis of systems in a modular approach is addressing three issues: development of the structure of the system subject to the requirements of consumers to quality of power and the allowable time of power outage; determining the required level redundancy of major functional units (blocks, elements to ensure the required reliability of the system; - ensuring the most effective interconnection of modules, including electromagnetic compatibility, and the rational use during normal and emergency operation of the system. We have proposed new structural solution of the main functional units and uninterrupted power supply systems in modular design. To reduce EMI and improve efficiency uninterruptible power supply systems in the design of static converters we need to use a transformer with a rotating magnetic field. In addition, the prospective current is to be used as a source of renewable energy. Another promising approach is the use of direct frequency converters as voltage stabilizers and frequency of the current
A cascaded online uninterruptible power supply using reduced semiconductor
Zhang, Lei; Loh, Poh Chiang; Gao, Feng
2011-01-01
A cascaded online uninterruptible power supply (UPS) is proposed here that uses 25% lesser semiconductor, as compared to its traditional H-bridge cascaded precedence. Unlike other component-saving configurations where compromises are unavoidable, almost no performance degradations and constraints...
Xu, Yadong; Serre, Marc L; Reyes, Jeanette; Vizuete, William
2016-04-19
To improve ozone exposure estimates for ambient concentrations at a national scale, we introduce our novel Regionalized Air Quality Model Performance (RAMP) approach to integrate chemical transport model (CTM) predictions with the available ozone observations using the Bayesian Maximum Entropy (BME) framework. The framework models the nonlinear and nonhomoscedastic relation between air pollution observations and CTM predictions and for the first time accounts for variability in CTM model performance. A validation analysis using only noncollocated data outside of a validation radius rv was performed and the R(2) between observations and re-estimated values for two daily metrics, the daily maximum 8-h average (DM8A) and the daily 24-h average (D24A) ozone concentrations, were obtained with the OBS scenario using ozone observations only in contrast with the RAMP and a Constant Air Quality Model Performance (CAMP) scenarios. We show that, by accounting for the spatial and temporal variability in model performance, our novel RAMP approach is able to extract more information in terms of R(2) increase percentage, with over 12 times for the DM8A and over 3.5 times for the D24A ozone concentrations, from CTM predictions than the CAMP approach assuming that model performance does not change across space and time.
Robust maximum likelihood estimation for stochastic state space model with observation outliers
AlMutawa, J.
2016-08-01
The objective of this paper is to develop a robust maximum likelihood estimation (MLE) for the stochastic state space model via the expectation maximisation algorithm to cope with observation outliers. Two types of outliers and their influence are studied in this paper: namely,the additive outlier (AO) and innovative outlier (IO). Due to the sensitivity of the MLE to AO and IO, we propose two techniques for robustifying the MLE: the weighted maximum likelihood estimation (WMLE) and the trimmed maximum likelihood estimation (TMLE). The WMLE is easy to implement with weights estimated from the data; however, it is still sensitive to IO and a patch of AO outliers. On the other hand, the TMLE is reduced to a combinatorial optimisation problem and hard to implement but it is efficient to both types of outliers presented here. To overcome the difficulty, we apply the parallel randomised algorithm that has a low computational cost. A Monte Carlo simulation result shows the efficiency of the proposed algorithms. An earlier version of this paper was presented at the 8th Asian Control Conference, Kaohsiung, Taiwan, 2011.
Observation of SN2011fe with INTEGRAL. I. Pre--maximum phase
Isern, J; Bravo, E; Diehl, R; Knödlseder, J; Domingo, A; Hirschmann, A; Hoeflich, P; Lebrun, F; Renaud, M; Soldi, S; Elias-Rosa, N; Hernanz, M; Kulebi, B; Zhang, X; Badenes, C; Domínguez, I; Garcia-Senz, D; Jordi, C; Lichti, G; Vedrenne, G; Von Ballmoos, P
2013-01-01
SN2011fe was detected by the Palomar Transient Factory on August 24th 2011 in M101 a few hours after the explosion. From the early optical spectra it was immediately realized that it was a Type Ia supernova thus making this event the brightest one discovered in the last twenty years. The distance of the event offered the rare opportunity to perform a detailed observation with the instruments on board of INTEGRAL to detect the gamma-ray emission expected from the decay chains of $^{56}$Ni. The observations were performed in two runs, one before and around the optical maximum, aimed to detect the early emission from the decay of $^{56}$Ni and another after this maximum aimed to detect the emission of $^{56}$Co. The observations performed with the instruments on board of INTEGRAL (SPI, IBIS/ISGRI, JEMX and OMC) have been analyzed and compared with the existing models of gamma-ray emission from such kind of supernovae. In this paper, the analysis of the gamma-ray emission has been restricted to the first epoch. B...
High-frequency maximum observable shaking map of Italy from fault sources
Zonno, Gaetano
2012-03-17
We present a strategy for obtaining fault-based maximum observable shaking (MOS) maps, which represent an innovative concept for assessing deterministic seismic ground motion at a regional scale. Our approach uses the fault sources supplied for Italy by the Database of Individual Seismogenic Sources, and particularly by its composite seismogenic sources (CSS), a spatially continuous simplified 3-D representation of a fault system. For each CSS, we consider the associated Typical Fault, i. e., the portion of the corresponding CSS that can generate the maximum credible earthquake. We then compute the high-frequency (1-50 Hz) ground shaking for a rupture model derived from its associated maximum credible earthquake. As the Typical Fault floats within its CSS to occupy all possible positions of the rupture, the high-frequency shaking is updated in the area surrounding the fault, and the maximum from that scenario is extracted and displayed on a map. The final high-frequency MOS map of Italy is then obtained by merging 8,859 individual scenario-simulations, from which the ground shaking parameters have been extracted. To explore the internal consistency of our calculations and validate the results of the procedure we compare our results (1) with predictions based on the Next Generation Attenuation ground-motion equations for an earthquake of M w 7.1, (2) with the predictions of the official Italian seismic hazard map, and (3) with macroseismic intensities included in the DBMI04 Italian database. We then examine the uncertainties and analyse the variability of ground motion for different fault geometries and slip distributions. © 2012 Springer Science+Business Media B.V.
Systems for uninterrupted power supply; USV - ein starkes Stueck Sicherheit
Schneider, D.; Soelter, W. [AEG SVS GmbH, Warstein-Belecke (Germany)
1999-09-01
The millennium bug is only one of the many potential hazards in information technology. Systems for uninterrupted power supply offer a solution. [German] Alle Welt spricht vom Jahr-2000-Problem (Y2K). Die Meinungen dazu reichen von Horror-Szenarien bis hin zum Ignorieren dieses Problems. Dabei steht fest: Das Jahr-2000-Problem ist nur eines unter vielen Gefahrenpotentialen fuer die Informationstechnik. Dabei lassen sich alle Stoerfaktoren, die aus der Energieversorgung resultieren mit einer USV beseitigen. USV sichern Geschaeftsablaeufe und Fertigungsprozesse. (orig.)
Willson, Robert F.
1991-01-01
Very Large Array observations at 20 cm wavelength can detect the hot coronal plasma previously observed at soft x ray wavelengths. Thermal cyclotron line emission was detected at the apex of coronal loops where the magnetic field strength is relatively constant. Detailed comparison of simultaneous Solar Maximum Mission (SMM) Satellite and VLA data indicate that physical parameters such as electron temperature, electron density, and magnetic field strength can be obtained, but that some coronal loops remain invisible in either spectral domain. The unprecedent spatial resolution of the VLA at 20 cm wavelength showed that the precursor, impulsive, and post-flare components of solar bursts originate in nearby, but separate loops or systems of loops.. In some cases preburst heating and magnetic changes are observed from loops tens of minutes prior to the impulsive phase. Comparisons with soft x ray images and spectra and with hard x ray data specify the magnetic field strength and emission mechanism of flaring coronal loops. At the longer 91 cm wavelength, the VLA detected extensive emission interpreted as a hot 10(exp 5) K interface between cool, dense H alpha filaments and the surrounding hotter, rarefield corona. Observations at 91 cm also provide evidence for time-correlated bursts in active regions on opposite sides of the solar equator; they are attributed to flare triggering by relativistic particles that move along large-scale, otherwise-invisible, magnetic conduits that link active regions in opposite hemispheres of the Sun.
The solar wind at solar maximum: comparisons of EISCAT IPS and in situ observations
A. R. Breen
Full Text Available The solar maximum solar wind is highly structured in latitude, longitude and in time. Coronal measurements show a very high degree of variability, with large variations that are less apparent within in situ spacecraft measurements. Interplanetary scintillation (IPS observations from EISCAT, covering distances from 20 to 100 solar radii (R_{S}, are an ideal source of information on the inner solar wind and can be used, therefore, to cast light on its evolution with distance from the Sun. Earlier comparisons of in situ and IPS measurements under solar minimum conditions showed good large-scale agreement, particularly in the fast wind. In this study we attempt a quantitative comparison of measurements made over solar maximum by EISCAT (20–100 R_{S} and the Wind and Ulysses spacecraft (at 215 R_{S} and 300–1000 R_{S}, respectively. The intervals studied were August–September 1999, May 2000, September 2000 and May 2001, the last-named being the period of the second Ulysses fast latitude scan. Both ballistic and – when possible – MHD/ballistic hybrid models were used to relate the data sets, and we compare the results obtained from these two mapping methods. The results of this study suggest that solar wind velocities measured in situ were less variable than those estimated from IPS measurements closer to the Sun, with the greatest divergence between IPS velocities and in situ measurements occurring in regions where steep longitudinal velocity gradients were seen in situ. We suggest that the interaction between streams of solar wind with different velocities leads to "smoothing" of solar wind velocities between 30–60 R_{S} and 1 AU, and that this process continues at greater distances from the Sun.
Key words. Interplanetary physics (solar wind plasma; sources of the solar wind; instruments and techniques
Maximum-Likelihood Adaptive Filter for Partially Observed Boolean Dynamical Systems
Imani, Mahdi; Braga-Neto, Ulisses M.
2017-01-01
Partially-observed Boolean dynamical systems (POBDS) are a general class of nonlinear models with application in estimation and control of Boolean processes based on noisy and incomplete measurements. The optimal minimum mean square error (MMSE) algorithms for POBDS state estimation, namely, the Boolean Kalman filter (BKF) and Boolean Kalman smoother (BKS), are intractable in the case of large systems, due to computational and memory requirements. To address this, we propose approximate MMSE filtering and smoothing algorithms based on the auxiliary particle filter (APF) method from sequential Monte-Carlo theory. These algorithms are used jointly with maximum-likelihood (ML) methods for simultaneous state and parameter estimation in POBDS models. In the presence of continuous parameters, ML estimation is performed using the expectation-maximization (EM) algorithm; we develop for this purpose a special smoother which reduces the computational complexity of the EM algorithm. The resulting particle-based adaptive filter is applied to a POBDS model of Boolean gene regulatory networks observed through noisy RNA-Seq time series data, and performance is assessed through a series of numerical experiments using the well-known cell cycle gene regulatory model.
Maximum ikelihood estimation for the double-count method with independent observers
Manly, Bryan F.J.; McDonald, Lyman L.; Garner, Gerald W.
1996-01-01
Data collected under a double-count protocol during line transect surveys were analyzed using new maximum likelihood methods combined with Akaike's information criterion to provide estimates of the abundance of polar bear (Ursus maritimus Phipps) in a pilot study off the coast of Alaska. Visibility biases were corrected by modeling the detection probabilities using logistic regression functions. Independent variables that influenced the detection probabilities included perpendicular distance of bear groups from the flight line and the number of individuals in the groups. A series of models were considered which vary from (1) the simplest, where the probability of detection was the same for both observers and was not affected by either distance from the flight line or group size, to (2) models where probability of detection is different for the two observers and depends on both distance from the transect and group size. Estimation procedures are developed for the case when additional variables may affect detection probabilities. The methods are illustrated using data from the pilot polar bear survey and some recommendations are given for design of a survey over the larger Chukchi Sea between Russia and the United States.
REDUCED-PARTS SINGLE-PHASE UNINTERRUPTIBLE POWER SUPPLY
DANIEL ALBU
2008-05-01
Full Text Available Reducing the number of switches andpassive elements in uninterruptible power supplytopologies not only reduces the cost of the wholesystem but also provides some other advantagessuch as greater compactness, smaller weight, andhigher reliability. Generally, the largest costreduction is achieved by reducing the number ofswitches employed in a converter power circuit.Another way of reducing the cost of converters is touse a topology that allows replacing activeswitches, such as IGBTs, MOSFETs, andthyristors, with diodes. Diodes are less expensivethan active switches and apart from this, there isalso a cost reduction from eliminating all thecircuitry for driving active switches.
Observed Abrupt Changes in Minimum and Maximum Temperatures in Jordan in the 20th Century
Mohammad M. samdi
2006-01-01
Full Text Available This study examines changes in annual and seasonal mean (minimum and maximum temperatures variations in Jordan during the 20th century. The analyses focus on the time series records at the Amman Airport Meteorological (AAM station. The occurrence of abrupt changes and trends were examined using cumulative sum charts (CUSUM and bootstrapping and the Mann-Kendall rank test. Statistically significant abrupt changes and trends have been detected. Major change points in the mean minimum (night-time and mean maximum (day-time temperatures occurred in 1957 and 1967, respectively. A minor change point in the annual mean maximum temperature also occurred in 1954, which is essential agreement with the detected change in minimum temperature. The analysis showed a significant warming trend after the years 1957 and 1967 for the minimum and maximum temperatures, respectively. The analysis of maximum temperatures shows a significant warming trend after the year 1967 for the summer season with a rate of temperature increase of 0.038°C/year. The analysis of minimum temperatures shows a significant warming trend after the year 1957 for all seasons. Temperature and rainfall data from other stations in the country have been considered and showed similar changes.
Energy efficiency criteria in uninterruptible power supply selection
Moreno-Munoz, A.; Flores-Arias, J.M.; Bellido-Outerino, F.J.; Gil-de-Castro, A. [Universidad de Cordoba, Area de Electronica, Escuela Politecnica Superior, Leonardo Da Vinci Bldg., Campus de Rabanales, Ctra. Nacional IV, Km 369, E-14071 Cordoba (Spain); Rosa, Juan Jose Gonzalez de la [Universidad de Cadiz, Area de Electronica, Dpto. ISA, TE y Electronica, Escuela Politecnica SuperiorAvda, Ramon Puyol, S/N, E-11202 Algeciras-Cadiz (Spain)
2011-04-15
With the generalized use of microelectronic devices, server computers and other susceptible equipment, the subject related to power quality (PQ) and its relationship to vulnerability of high performance plants are becoming an increasing concern to the industry. This paper addresses how uninterruptible power supply (UPS), particularly when configured in distributed DC mode, can become an energy efficient (EE) solution in high-tech buildings, especially when integrated with complimentary PQ measures. The paper is based on PQ audits conducted at different high-tech industries over the last years. It was found that the main problems for the equipment installed were voltage sags (or dips). Among all categories of electrical disturbances, voltage sags and momentary interruptions are the nemeses of the automated industrial process. The paper analyzes the capabilities of modern electronic power supplies and the convenience of embedded solution. Finally it is addresses the role of the Standards on the protection of electronic equipment and the implications for the final costumer. (author)
Bimode uninterruptible power supply compatibility in renewable hybrid energy systems
Bower, W. (Sandia National Labs., Albuquerque, NM (USA)); O' Sullivan, G. (Abacus Controls, Inc., Somerville, NJ (USA))
1990-08-01
Inverters installed in renewable hybrid energy systems are typically used in a stand-alone mode to supply ac power to loads from battery storage when the engine-generator is not being used. Similarities in topology and in the performance requirements of the standby uninterruptible power supply (UPS) system and the hybrid system suggest the UPS could be used in hybrid energy systems. Another alternative to inverters with add-on charging circuits or standby UPS hardware is the Bimode UPS. The bimode UPS uses common circuitry and power components for dc to ac inversion and battery charging. It also provides an automatic and nearly instantaneous ac power transfer function when the engine-generator is started or stopped. The measured operating and transfer characteristics of a bimode UPS in a utility system and in a hybrid system are presented. The applicability of the bimode UPS to hybrid systems and its compatibility in a PV/engine-generator hybrid system are given.
Testing of Uninterruptible Power Supplies with nonlinear loads
Heydt, Gerald; Briggs, Steve; Holcomb, Franklin; Edgar, Daiva
1994-09-01
Uninterruptible power supplies (UPS's) are used to provide power to sensitive and critical loads when the commercial supply has been interrupted. These loads may be nonlinear, which in the military often includes communications equipment, adjustable speed drives, fluorescent lighting, and mainframe and small computers. Most electrical characteristics of UPS's are not currently subject to codes and standards, and there are no military specifications for UPS's. Existing standards assume that UPS's will be operated with linear loads. Since most UPS systems are operated with nonlinear loads, there is concern that UPSs will suffer degraded performance or failure when operated with these loads. This work developed a test methodology by which UPS systems can be tested and their susceptibility to nonlinear loads quantified. The tests measure load transfer, efficiency, heating, load support, voltage regulation, and isolation. Several commercially available UPS systems are recommended for testing.
Battery requirements for uninterruptible power-supply applications
Brownlie, G. D.
There is an expanding market for small-to-medium capacity secondary batteries for use in uninterruptible power supplies (UPSs). UPSs are commonly used to provide protected power to computer installations, point-of sale terminals, and essential telecommunications equipment. The capacity of currently available UPSs is, typically, from 500 VA to several hundred kVa, with power-backup from ten minutes to one hour at full load. All UPSs incorporate secondary batteries; usually sealed lead/acid cells. Battery requirements include: high reliability; extended operating life; tolerance to extended float charging; and good, deep-discharge characteristics at high discharge rates. Recent research and development experiences in the design of a range of UPSs is described and the need for batteries optimised for UPS applications is highlighted.
Fuel-cell powered uninterruptible power supply systems: Design considerations
Choi, Woojin; Howze, Jo. W.; Enjeti, Prasad
A 1-kVA fuel cell powered, line-interactive uninterruptible power supply (UPS) system that employs modular (fuel cell and power converter) blocks is introduced. Two commercially available proton-exchange membrane fuel cell (25-39 V, 500 W) modules together with suitable dc-dc and dc-ac power electronic converter modules are employed. A supercapacitor module is also used to compensate for the instantaneous power fluctuations and to overcome the slow dynamics of the fuel processor (reformers). Further energy stored in the supercapacitor is also utilized to handle a momentary overload such as 200% for a short duration. Due to the absence of batteries, the system satisfies the demand for an environmentally clean source of energy. A complete design that defines the amount of hydrogen storage required for a power outage of 1 h, and the sizing of the supercapacitors for transient load demand is presented for a 1-kVA UPS.
Length-dependent aggregation of uninterrupted polyalanine peptides.
Bernacki, Joseph P; Murphy, Regina M
2011-11-01
Polyalanine (polyA) is the third-most prevalent homopeptide repeat in eukaryotes, behind polyglutamine and polyasparagine. Abnormal expansion of the polyA repeat is linked to at least nine human diseases, and the disease mechanism likely involves enhanced length-dependent aggregation. Because of the simplicity of its side chain, polyA has been a favorite target of computational studies, and because of their tendency to fold into α-helix, peptides containing polyA-rich domains have been a popular experimental subject. However, experimental studies on uninterrupted polyA are very limited. We synthesized polyA peptides containing uninterrupted sequences of 7 to 25 alanines (A7 to A25) and characterized their length-dependent conformation and aggregation properties. The peptides were primarily disordered, with a modest component of α-helix that increased with increasing length. From measurements of mean distance spanned by the polyA segment, we concluded that physiological buffers are neutral solvents for shorter polyA peptides and poor solvents for longer peptides. At moderate concentration and near-physiological temperature, polyA assembled into soluble oligomers, with a sharp transition in oligomer physical properties between A19 and A25. With A19, oligomers were large, contained only a small fraction of the total peptide mass, and slowly grew into loose clusters, while A25 rapidly and completely assembled into small stable oligomers of ~7 nm radius. At high temperatures, A19 assembled into fibrils, but A25 precipitated as dense, micrometer-sized particles. A comparison of these results to those obtained with polyglutamine peptides of similar design sheds light on the role of the side chain in regulating conformation and aggregation.
Upper-Thermospheric Observations and Neutral-Gas Dynamics at High Latitudes During Solar Maximum.
1987-01-01
aeasFPIgure 6.5, ecep orB> oniios -40 TO~ -- 12 p . p’ T5 .ww i - IO RFS 5 183 maximum antisunward neutral winds located in the center of the polar cap. The...Solar flux variability in the *- Schumann-Runge continuum as a function of solar cycle 21. J. Geophys. Res., 85, 6063 - 6068, 1980c. Torr, M. R., P. G
Climate Prediction Center (CPC) U.S. Daily Maximum Air Temperature Observations
National Oceanic and Atmospheric Administration, Department of Commerce — Observational reports of daily air temperature (1200 UTC to 1200 UTC) are made by members of the NWS Automated Surface Observing Systems (ASOS) network; NWS...
Climate Sensitivity of the Last Glacial Maximum from Paleoclimate Simulations and Observations
Otto-Bliesner, B. L.; Brady, E.; Kothavala, Z.
2004-12-01
Global coupled climate models run for future scenarios of increasing atmospheric CO2 give a range of response of the global average surface temperature. Regional responses, including the North Atlantic overturning circulation and tropical Pacific ENSO, also vary significantly among models. The second phase of the Paleoclimate Modeling Intercomparison Project (PMIP 2) is coordinating simulations and data syntheses for the Last Glacial Maximum (21,000 years before present) to allow another assessment of climate sensitivity. Atmospheric CO2 concentrations at the Last Glacial Maximum (LGM) have been estimated using measurements from ice cores to be 185 ppmv, approximately 50% of present-day values. Global, annual mean surface temperature simulated by the slab ocean version of the National Center for Atmospheric Research (NCAR) Community Climate System Model (CCSM3) shows a cooling of -2.8°C for LGM CO2 levels and a warming of 2.5°C for a doubling of CO2. Slab and coupled CCSM3 simulations that include the reductions of the other atmospheric trace gases and the large ice sheets covering North America and Eurasia at LGM give cooling in agreement with proxy inferences and indicate that LGM CO2 explains about half of the global cooling at LGM. Regional signatures of the climate system to changed LGM forcing are also an important measure of climate sensitivity and results from the fully coupled version of CCSM3 will be shown.
Flat-fielding of Solar Hα Observations Based on the Maximum Correntropy Criterion
Xu, Gao-Gui; Zheng, Sheng; Lin, Gang-Hua; Wang, Xiao-Fan
2016-08-01
The flat-field CCD calibration method of Kuhn et al. (KLL) is an efficient method for flat-fielding. However, since it depends on the minimum of the sum of squares error (SSE), its solution is sensitive to noise, especially non-Gaussian noise. In this paper, a new algorithm is proposed to determine the flat field. The idea is to change the criterion of gain estimate from SSE to the maximum correntropy. The result of a test on simulated data demonstrates that our method has a higher accuracy and a faster convergence than KLL’s and Chae’s. It has been found that the method effectively suppresses noise, especially in the case of typical non-Gaussian noise. And the computing time of our algorithm is the shortest.
Sacanna, S.; Rossi, L.; Wouterse, A.; Philipse, A.P.
2007-01-01
We have measured the random packing density of monodisperse colloidal silica ellipsoids with a well-defined shape, gradually deviating from a sphere shape up to prolates with aspect ratios of about 5, to find for a colloidal system the first experimental observation for the density maximum (at an as
Carletta, Nicholas D.; Mullendore, Gretchen L.; Starzec, Mariusz; Xi, Baike; Feng, Zhe; Dong, Xiquan
2016-08-01
Convective mass transport is the transport of mass from near the surface up to the upper troposphere and lower stratosphere (UTLS) by a deep convective updraft. This transport can alter the chemical makeup and water vapor balance of the UTLS, which affects cloud formation and the radiative properties of the atmosphere. It is therefore important to understand the exact altitudes at which mass is detrained from convection. The purpose of this study was to improve upon previously published methodologies for estimating the level of maximum detrainment (LMD) within convection using data from a single ground-based radar. Four methods were used to identify the LMD and validated against dual-Doppler derived vertical mass divergence fields for six cases with a variety of storm types. The best method for locating the LMD was determined to be the method that used a reflectivity texture technique to determine convective cores and a multi-layer echo identification to determine anvil locations. Although an improvement over previously published methods, the new methodology still produced unreliable results in certain regimes. The methodology worked best when applied to mature updrafts, as the anvil needs time to grow to a detectable size. Thus, radar reflectivity is found to be valuable in estimating the LMD, but storm maturity must also be considered for best results.
Dai, Huanping; Micheyl, Christophe
2015-05-01
Proportion correct (Pc) is a fundamental measure of task performance in psychophysics. The maximum Pc score that can be achieved by an optimal (maximum-likelihood) observer in a given task is of both theoretical and practical importance, because it sets an upper limit on human performance. Within the framework of signal detection theory, analytical solutions for computing the maximum Pc score have been established for several common experimental paradigms under the assumption of Gaussian additive internal noise. However, as the scope of applications of psychophysical signal detection theory expands, the need is growing for psychophysicists to compute maximum Pc scores for situations involving non-Gaussian (internal or stimulus-induced) noise. In this article, we provide a general formula for computing the maximum Pc in various psychophysical experimental paradigms for arbitrary probability distributions of sensory activity. Moreover, easy-to-use MATLAB code implementing the formula is provided. Practical applications of the formula are illustrated, and its accuracy is evaluated, for two paradigms and two types of probability distributions (uniform and Gaussian). The results demonstrate that Pc scores computed using the formula remain accurate even for continuous probability distributions, as long as the conversion from continuous probability density functions to discrete probability mass functions is supported by a sufficiently high sampling resolution. We hope that the exposition in this article, and the freely available MATLAB code, facilitates calculations of maximum performance for a wider range of experimental situations, as well as explorations of the impact of different assumptions concerning internal-noise distributions on maximum performance in psychophysical experiments.
Optical historical maximum of the blazar PKS 1510-08 observed by the GASP
Larionov, V. M.; Villata, M.; Raiteri, C. M.; Arkharov, A. A.; Konstantinova, T. S.; Kopatskaya, E. N.; Larionova, E. G.; Blinov, D.; Melnichuk, D.; Troitsky, I.
2009-03-01
With reference to ATel #1988 (and references therein) on the optical and near-IR brightening of the blazar PKS 1510-08, the GLAST-AGILE Support Program (GASP) of the Whole Earth Blazar Telescope (WEBT) reports that the source has further brightened by almost 1 mag in the last 3 days, reaching R = 14.35 ± 0.03 on March 27.1. As far as we know, this is the brightest optical state ever observed for this object.
Observations of the Columbia River salt wedge and estuarine turbidity maximum using AUVs
McNeil, C. L.; Shcherbina, A.; Litchendorf, T.; Sanford, T. B.; Martin, D.; Baptista, A. M.; Lopez, J.; Crump, B.
2012-12-01
We present detailed observations of the salt wedge and estuarine turbidity maxima (ETM) in the North Channel of the Columbia River estuary (OR, USA) under conditions of high river discharge during May 2012. Measurements were made using two REMUS-100 autonomous underwater vehicles (AUVs; Hydroid, Inc.) equipped with SBE-49 CTDs (Seabird-Electronics, Inc.) for water temperature and salinity, upward/downward looking ADCPs (Teledyne RDI, Inc.) for currents, and ECO Puck triplets (WET Labs, Inc.) for optical backscatter measurement of turbidity. The acoustic backscatter intensity from the ADCP was also used as a proxy measurement for suspended sediments and was found to correlate quite well with the optical backscatter measurements. Daily forecasts of tidal currents in the estuary were used to simulate the AUV path in advance of deployment to aid data collection. Repeat AUV sections were made along and across the channel during flood tide. The turbidity and height above riverbed of the bottom boundary layer was observed to increase toward the deeper waters at the center of the channel. An ETM-like feature was observed ahead of the advancing salt wedge front with locally higher turbidity levels, presumably the result of flocculation and resuspension. To visualize better the repeat section measurements we made data movies. Each frame of the movie is our best estimate of a synoptic snapshot of along-section tracer distribution at a given point in time. These snapshots were created by re-location of non-synoptic AUV measurements to account for the advection of water parcels. An example data movie showing the intrusion of the salt wedge during the flood tide will be presented.
Postpolypectomy bleeding in patients undergoing colonoscopy on uninterrupted clopidogrel therapy.
Singh, Mandeep; Mehta, Nilesh; Murthy, Uma K; Kaul, Vivek; Arif, Asma; Newman, Nancy
2010-05-01
The risk of postpolypectomy bleeding (PPB) in patients undergoing colonoscopy on uninterrupted clopidogrel therapy has not been established. To assess the PPB rate and outcome and identify risk factors associated with PPB in patients taking clopidogrel. Single-center, retrospective study. Demographics, clinical parameters, polyp characteristics, polypectomy techniques, and postpolypectomy events in the groups were compared by univariate analysis. Stepwise logistic regression analyses identified independent risk factors associated with PPB. Veterans Affairs Medical Center. A total of 142 patients (375 polypectomies) taking clopidogrel (cases) and 1243 patients (3226 polypectomies) not taking clopidogrel (controls). None. Postpolypectomy bleeding, hospitalization, and mortality. The immediate (intraprocedural) bleeding rate was similar in the 2 groups (2.1% vs 2.1%). Delayed (postprocedural) PPB rate was higher in the group taking clopidogrel (3.5% vs 1.0%, P = .02). Delayed bleeding of significance requiring hospitalization and transfusion/intervention was also higher in patients taking clopidogrel (2.1% vs 0.4%, P = .04). The length of hospital stay and interventions for PPB were comparable between the 2 groups. There was no mortality. Concomitant use of clopidogrel and aspirin/other nonsteroidal anti-inflammatory drugs (odds ratio 3.7; 95% CI, 1.6-8.5) and the number of polyps removed (OR 1.3; 95% CI, 1.2-1.4) were the only significant risk factors associated with PPB. Clopidogrel alone was not an independent risk factor for PPB. Retrospective study and small number of patients with PPB. The PPB rate is significantly higher in patients undergoing polypectomy while taking clopidogrel and concomitant aspirin/nonsteroidal anti-inflammatory drugs; however, the risk is small and the outcome is favorable. Routine cessation of clopidogrel in patients before colonoscopy/polypectomy is not necessary. 2010 American Society for Gastrointestinal Endoscopy. Published by Mosby
Jung-Min Kwon
2013-01-01
Full Text Available A composite energy storage system (CESS that includes a photovoltaic (PV power generation and an uninterruptible power supply (UPS function is proposed. This system has three operating modes, namely, a grid-connected inverter mode, a grid-connected rectifier mode, and an islanding mode. This system is composed of a boost converter, a three-phase inverter/rectifier, a bidirectional DC/DC converter, and thyristor switches. The boost converter extracts maximum power from the PV panels and sends it to the DC-link. The bidirectional DC/DC converter is connected between the battery and the DC-link, which leads to an optimized charging/discharging operation. The three-phase inverter/rectifier transmits the power to and from the grid. Also, it operates as a UPS in the islanding mode. The thyristor switches are used for connecting/disconnecting between the grid and the AC load. A 15 kW prototype is implemented to verify the performance of the proposed system.
Azaryan N. A.
2007-06-01
Full Text Available It is suggested a modification of tetragonal finite - element method, where the tasks of plate bending with taking into accountancy uninterrupted normal efforts or displacements are reduced to quadratic programming ones.
Kinkhabwala, Ali
2013-01-01
The most fundamental problem in statistics is the inference of an unknown probability distribution from a finite number of samples. For a specific observed data set, answers to the following questions would be desirable: (1) Estimation: Which candidate distribution provides the best fit to the observed data?, (2) Goodness-of-fit: How concordant is this distribution with the observed data?, and (3) Uncertainty: How concordant are other candidate distributions with the observed data? A simple unified approach for univariate data that addresses these traditionally distinct statistical notions is presented called "maximum fidelity". Maximum fidelity is a strict frequentist approach that is fundamentally based on model concordance with the observed data. The fidelity statistic is a general information measure based on the coordinate-independent cumulative distribution and critical yet previously neglected symmetry considerations. An approximation for the null distribution of the fidelity allows its direct conversi...
A metallo-DNA nanowire with uninterrupted one-dimensional silver array
Kondo, Jiro; Tada, Yoshinari; Dairaku, Takenori; Hattori, Yoshikazu; Saneyoshi, Hisao; Ono, Akira; Tanaka, Yoshiyuki
2017-10-01
The double-helix structure of DNA, in which complementary strands reversibly hybridize to each other, not only explains how genetic information is stored and replicated, but also has proved very attractive for the development of nanomaterials. The discovery of metal-mediated base pairs has prompted the generation of short metal-DNA hybrid duplexes by a bottom-up approach. Here we describe a metallo-DNA nanowire—whose structure was solved by high-resolution X-ray crystallography—that consists of dodecamer duplexes held together by four different metal-mediated base pairs (the previously observed C-Ag-C, as well as G-Ag-G, G-Ag-C and T-Ag-T) and linked to each other through G overhangs involved in interduplex G-Ag-G. The resulting hybrid nanowires are 2 nm wide with a length of the order of micrometres to millimetres, and hold the silver ions in uninterrupted one-dimensional arrays along the DNA helical axis. The hybrid nanowires are further assembled into three-dimensional lattices by interactions between adenine residues, fully bulged out of the double helix.
Waltemeyer, Scott D.
2008-01-01
Estimates of the magnitude and frequency of peak discharges are necessary for the reliable design of bridges, culverts, and open-channel hydraulic analysis, and for flood-hazard mapping in New Mexico and surrounding areas. The U.S. Geological Survey, in cooperation with the New Mexico Department of Transportation, updated estimates of peak-discharge magnitude for gaging stations in the region and updated regional equations for estimation of peak discharge and frequency at ungaged sites. Equations were developed for estimating the magnitude of peak discharges for recurrence intervals of 2, 5, 10, 25, 50, 100, and 500 years at ungaged sites by use of data collected through 2004 for 293 gaging stations on unregulated streams that have 10 or more years of record. Peak discharges for selected recurrence intervals were determined at gaging stations by fitting observed data to a log-Pearson Type III distribution with adjustments for a low-discharge threshold and a zero skew coefficient. A low-discharge threshold was applied to frequency analysis of 140 of the 293 gaging stations. This application provides an improved fit of the log-Pearson Type III frequency distribution. Use of the low-discharge threshold generally eliminated the peak discharge by having a recurrence interval of less than 1.4 years in the probability-density function. Within each of the nine regions, logarithms of the maximum peak discharges for selected recurrence intervals were related to logarithms of basin and climatic characteristics by using stepwise ordinary least-squares regression techniques for exploratory data analysis. Generalized least-squares regression techniques, an improved regression procedure that accounts for time and spatial sampling errors, then were applied to the same data used in the ordinary least-squares regression analyses. The average standard error of prediction, which includes average sampling error and average standard error of regression, ranged from 38 to 93 percent
Huang, Yu
Solar energy becomes one of the major alternative renewable energy options for its huge abundance and accessibility. Due to the intermittent nature, the high demand of Maximum Power Point Tracking (MPPT) techniques exists when a Photovoltaic (PV) system is used to extract energy from the sunlight. This thesis proposed an advanced Perturbation and Observation (P&O) algorithm aiming for relatively practical circumstances. Firstly, a practical PV system model is studied with determining the series and shunt resistances which are neglected in some research. Moreover, in this proposed algorithm, the duty ratio of a boost DC-DC converter is the object of the perturbation deploying input impedance conversion to achieve working voltage adjustment. Based on the control strategy, the adaptive duty ratio step size P&O algorithm is proposed with major modifications made for sharp insolation change as well as low insolation scenarios. Matlab/Simulink simulation for PV model, boost converter control strategy and various MPPT process is conducted step by step. The proposed adaptive P&O algorithm is validated by the simulation results and detail analysis of sharp insolation changes, low insolation condition and continuous insolation variation.
Zhang, Chi; Guerrero, Josep M.; Vasquez, Juan Carlos
2015-01-01
In a modular uninterruptible power supplies (UPS), each DC/AC module was designed to work in a circular way considering the reliability and power stress issues of the whole system. Thus unsynchronized PWMs will occur if any of the DC/AC modules is plugged in or out of the system at any time...
Angelo A. Beltran Jr.
2014-03-01
Full Text Available —The control and operation of electronic systems relies and depends on the availability of the power supply. Rechargeable batteries have been more pervasively used as the energy storage and power source for various electrical and electronic systems and devices, such as communication systems, electronic devices, renewable power systems, electric vehicles, etc. However, the rechargeable batteries are subjected to the availability of the external power source when it is drained out. Because of the concern of battery life, environmental pollution and a possible energy crisis, the renewable solar energy has received an increasing attention in recent years. A fuzzy logic control based grid tied uninterruptible power supply integrating renewable solar energy can be used for electrical and electronic systems to produce power generation. This paper presents the design and implementation of fuzzy logic control based grid tied uninterruptible power supply integrating the renewable solar power energy system. The uninterruptible power supply (UPS system is characterized by the rechargeable battery that is connected with the Photovoltaic Panel through the DC/DC converter, the utility AC through the AC/DC converter and the load is connected through the DC/AC converter. The whole operation is controlled by the fuzzy logic algorithm. A complete hardware prototype system model of the fuzzy logic control based on the grid tied uninterruptible power supply integrating with the renewable solar energy is designed and implemented. The operation and effectiveness of the proposed system is then demonstrated by the actual and real time implementation of the fuzzy logic control grid tied operation uninterruptible power supply integrating renewable solar energy connected to the rechargeable battery bank and a PIC microcontroller platform for fuzzy logic control and operation
McKibben, R. B.; Connell, J. J.; Lopate, C.; Zhang, M.; Anglin, J.D.; Balogh, A.; Dalla, S.; Sanderson, T. R.; Marsden, R. G.; Hofer, M. Y.; Kunow, H.; Posner, A.; Heber, B.
2003-01-01
In 2000–2001 Ulysses passed from the south to the north polar regions of the Sun in the inner heliosphere, providing a snapshot of the latitudinal structure of cosmic ray modulation and solar energetic particle populations during a period near solar maximum. Observations from the COSPIN suite of energetic charged particle telescopes show that latitude variations in the cosmic ray intensity in the inner heliosphere are nearly non-existent near solar maximum, whereas small but ...
DC uninterrupted power supply having instantaneous switching followed by low impedance switching
Hammond, Russell E.; Northup, Robert L.; Shimp, Alan G.
1991-10-01
An uninterruptible power supply is provided that incorporates switching circuitry permitting a path for instantaneous DC backup power to be supplied to a voltage-declining primary power supply bus. Once the instantaneous transition is made, battery power is switched to a low impedance path to provide long-term battery power delivery to the bus. At a point where the backup batteries no longer supply useful power to a load, disabling circuitry disconnects the batteries from the load so that excessive draining of the batteries does not result in irreversible battery damage. The uninterruptible power supply of the invention further includes an automatic battery charging circuitry that seeks to maintain the power supply batteries at optimal charge level. To enable an operator to adequately assess battery charge condition, the invention provides battery test circuitry that causes a simulated load to appear at the power supply batteries. Visual representations are then made as to battery status.
Lindsey, Lonnie
2000-08-01
One key to successful digital battlespace management is communications management. HF, UHF, VHF, CDMA, and SATCOM assets are difficult and complex to manage, and the modern digital battlespace adds new dimensions by including high volume multimedia transmissions, high-speed broadband data, and hyper-spectral sensor data. This environment requires more than the traditional voice transport-based communications system. The future sanctuary-based communication hub model will benefit from a novel uninterruptible self-determinate high bandwidth fiber optic system.
Development of Medium-Voltage and Large-Capacity Uninterruptible Power Supply System
Fujii, Kansuke; Kikuchi, Takayuki; Yoda, Kazuyuki
A 2-MVA uninterruptible power supply (UPS) system has been developed for compensating for voltage dips in a medium voltage network. The UPS system realizes a high efficiency (99.7%) during single-pulse switching. In this paper, the UPS configurations, storage devices, and transfer switches are compared. Thereafter, the details of the UPS system, the results of the short-circuit test and the system efficiencies are described.
Riley, Pete; Mikic, Z.; Linker, J. A.
2003-01-01
In this study we describe a series of MHD simulations covering the time period from 12 January 1999 to 19 September 2001 (Carrington Rotation 1945 to 1980). This interval coincided with: (1) the Sun s approach toward solar maximum; and (2) Ulysses second descent to the southern polar regions, rapid latitude scan, and arrival into the northern polar regions. We focus on the evolution of several key parameters during this time, including the photospheric magnetic field, the computed coronal hole boundaries, the computed velocity profile near the Sun, and the plasma and magnetic field parameters at the location of Ulysses. The model results provide a global context for interpreting the often complex in situ measurements. We also present a heuristic explanation of stream dynamics to describe the morphology of interaction regions at solar maximum and contrast it with the picture that resulted from Ulysses first orbit, which occurred during more quiescent solar conditions. The simulation results described here are available at: http://sun.saic.com.
2005-01-01
This document concerns the award of a contract for the supply of uninterruptible power supplies (UPS) for the Computer Centre. The Finance Committee is invited to agree to the negotiation of a contract with MGE-UPS (FR), the lowest bidder, for the supply of uninterruptible power supplies for the Computer Centre for a total amount of 527 661 euros (818 714 Swiss francs), not subject to revision. The rate of exchange used is that stipulated in the tender.
Calebe A. Matias
2017-07-01
Full Text Available The purpose of the present study is to simulate and analyze an isolated full-bridge DC/DC boost converter, for photovoltaic panels, running a modified perturb and observe maximum power point tracking method. The zero voltage switching technique was used in order to minimize the losses of the converter for a wide range of solar operation. The efficiency of the power transfer is higher than 90% for large solar operating points. The panel enhancement due to the maximum power point tracking algorithm is 5.06%.
de Nazelle, Audrey; Arunachalam, Saravanan; Serre, Marc L
2010-08-01
States in the USA are required to demonstrate future compliance of criteria air pollutant standards by using both air quality monitors and model outputs. In the case of ozone, the demonstration tests aim at relying heavily on measured values, due to their perceived objectivity and enforceable quality. Weight given to numerical models is diminished by integrating them in the calculations only in a relative sense. For unmonitored locations, the EPA has suggested the use of a spatial interpolation technique to assign current values. We demonstrate that this approach may lead to erroneous assignments of nonattainment and may make it difficult for States to establish future compliance. We propose a method that combines different sources of information to map air pollution, using the Bayesian Maximum Entropy (BME) Framework. The approach gives precedence to measured values and integrates modeled data as a function of model performance. We demonstrate this approach in North Carolina, using the State's ozone monitoring network in combination with outputs from the Multiscale Air Quality Simulation Platform (MAQSIP) modeling system. We show that the BME data integration approach, compared to a spatial interpolation of measured data, improves the accuracy and the precision of ozone estimations across the state.
Zhang, Chi; Guerrero, Josep M.; Quintero, Juan Carlos Vasquez
2017-01-01
In modular uninterruptible power supplies (UPSs), several DC/AC modules are required to work in parallel. This structure allows the system to be more reliable and flexible. These DC/AC modules share the same DC bus and AC critical bus. Module differences, such as filter inductor, filter capacitor......, control parameters, and so on, will make it possible for the potential zero sequence current to flow among the modules. This undesired type of circulating current will bring extra losses to the power semiconductor devices in the system, which should be paid special attention in high power application...
Performance evaluation of time-delay control schemes for uninterruptible power supplies
Loh, P.C; Tang, Y.; Blaabjerg, Frede
2008-01-01
Uninterruptible power supplies (UPSs) are commonly used to supply quality power at a well-regulated voltage to all nonlinear and unbalanced loads. To achieve that, a number of control schemes have since been proposed with the traditional double-loop linear control scheme being more popular because...... a more powerful processor. Avoiding these added complexities, this paper presents and compares a number of time-delay control schemes for UPS control, where the main building blocks needed are readily available memory storages and simple transfer functions formulated with either no or at least one...
Reduksi Harmonisa Pada Uninterruptible Power Supply (UPS) Dengan Single Tuned Passive Filter
Nasution, Agus Almi
2017-01-01
Using non-linier load in Uninterruptible Power Supply (UPS) can cause harmonic distortion which will eventually have the effect on power quality. The research was designed as a single-turned passive filter to cope will harmonic distortion in UPS. In this phase, THDv, THDi, and IHDi were measured in UPS. MATLAB/Simulink was used for simulation of filter testing. After single-turned passive filter was installed, the third order of harmonic current decreased from 47,69% to 7,08% or reduced 40.61...
Cunningham, Lee M; Mattu, Amal; O'Connor, Robert E; Brady, William J
2012-10-01
Over the last decade, the importance of delivering high-quality cardiopulmonary resuscitation (CPR) for cardiac arrest patients has become increasingly emphasized. Many experts are in agreement concerning the appropriate compression rate, depth, and amount of chest recoil necessary for high-quality CPR. In addition to these factors, there is a growing body of evidence supporting continuous or uninterrupted chest compressions as an equally important aspect of high-quality CPR. An innovative resuscitation protocol, called cardiocerebral resuscitation, emphasizes uninterrupted chest compressions and has been associated with superior rates of survival when compared with traditional CPR with standard advanced life support. Interruptions in chest compressions during CPR can negatively impact outcome in cardiac arrest; these interruptions occur for a range of reasons, including pulse determinations, cardiac rhythm analysis, electrical defibrillation, airway management, and vascular access. In addition to comparing cardiocerebral resuscitation to CPR, this review article also discusses possibilities to reduce interruptions in chest compressions without sacrificing the benefit of these interventions. Copyright © 2012 Elsevier Inc. All rights reserved.
Schnyder, G.; Mauchle, P.
2005-03-15
This comprehensive final report for the Swiss Federal Office of Energy (SFOE) summarises and presents nine individual reports and documents concerning the topic of uninterruptible power supplies. The documents compiled for the Swiss Federal Office of Energy in earlier projects concerning the quality and energy efficiency of uninterruptible power supply (UPS) systems dating from 1998 to 2000 have been revised and expanded in collaboration with a UPS Systems 'Trendwatch' group. The central documents such as 'Optimised use of UPS systems', 'Measurement procedures for UPS systems', 'Label for UPS systems' and 'Quality/Energy matrix' have been translated into English. These documents form the basis for the international distribution of the studies and findings relating to the quality and energy efficiency of UPS systems. These results are to be distributed by both European as well as American commissions. A label and codes of conduct are being developed. The nine individual reports are summarised in separate abstracts also recorded in the ETDEWEB database.
Safety of dental extractions during uninterrupted single or dual antiplatelet treatment.
Lillis, Theodoros; Ziakas, Antonios; Koskinas, Konstantinos; Tsirlis, Anastasios; Giannoglou, George
2011-10-01
Optimal dental management in patients on long-term antiplatelet treatment is not clearly defined. Antiplatelet discontinuation increases the risk of thrombotic complications, whereas uninterrupted antiplatelet therapy, which is the currently recommended approach, is assumed to increase the bleeding hazard after dental procedures. We sought to prospectively compare the risk of immediate and late postextraction bleeding in patients receiving uninterrupted single or dual antiplatelet therapy. We recruited 643 consecutive patients referred for dental extractions. In total 111 (17.3%) were on clinically indicated antiplatelet therapy: aspirin (n = 42), clopidogrel (n = 36), and aspirin and clopidogrel (n = 33). Controls (n = 532, 82.7%) were not on antiplatelet treatment. Immediate and late bleeding complications were recorded. Compared to controls the risk of prolonged immediate bleeding was higher in patients on dual antiplatelet therapy (relative risk [RR] 177.3, 95% confidence interval [CI] 43.5 to 722, p patients on aspirin alone (RR = 6.3, 95% CI 0.6 to 68.4, p = 0.2) or clopidogrel alone (RR = 7.4, 95% CI 0.7 to 79.5, p = 0.18); however, all immediate bleeding complications in all treatment groups were successfully managed with local hemostatic measures. No patient developed any late hemorrhage. In conclusion, dental extractions may be safely performed in patients receiving single or dual antiplatelet therapy when appropriate local hemostatic measures are taken, thus averting thrombotic risk of temporary antiplatelet discontinuation.
Comparison of strategies of preventive and corrective maintenance of uninterruptible power supply
B. Y. Volochiy
2013-09-01
Full Text Available Introduction. The comparison of the reliability of two variants of the fault-tolerant N+M redundant configurations for uninterruptible power supply with corrective and preventive maintenance is given in this paper. Formulation of the problem. Different variants of fault-tolerant redundant configurations and maintenance strategies provide equivalent mean time to failure indexes, but at the same time have different values of the probability of failure-free operation at given operation time value. Description of object under consideration. Fault-tolerant system consists of main and hot reserve modules and has two accumulator batteries. Reliability model for fault-tolerant system with N+M redundant configuration. Carrying out this research was made possible after the development of models of fault-tolerant systems as Kolmogorov - Chapman differential equation systems. Comparison of the reliability of uninterruptible power supply with different fault-tolerant configurations. There is shown quantitative difference between reliability indexes (operation time where probability of failure-free operation is not less than 0.99 of corrective and preventive maintenance. Conclusions. Reliability analysis of fault-tolerant systems shows that the strategy of corrective maintenance has higher values of operation time where probability of failure-free operation is not less than 0.99.
Simpson, Matthew J. R.; Milne, Glenn A.; Huybrechts, Philippe; Long, Antony J.
2009-08-01
We constrain a three-dimensional thermomechanical model of Greenland ice sheet (GrIS) evolution from the Last Glacial Maximum (LGM, 21 ka BP) to the present-day using, primarily, observations of relative sea level (RSL) as well as field data on past ice extent. Our new model (Huy2) fits a majority of the observations and is characterised by a number of key features: (i) the ice sheet had an excess volume (relative to present) of 4.1 m ice-equivalent sea level at the LGM, which increased to reach a maximum value of 4.6 m at 16.5 ka BP; (ii) retreat from the continental shelf was not continuous around the entire margin, as there was a Younger Dryas readvance in some areas. The final episode of marine retreat was rapid and relatively late (c. 12 ka BP), leaving the ice sheet land based by 10 ka BP; (iii) in response to the Holocene Thermal Maximum (HTM) the ice margin retreated behind its present-day position by up to 80 km in the southwest, 20 km in the south and 80 km in a small area of the northeast. As a result of this retreat the modelled ice sheet reaches a minimum extent between 5 and 4 ka BP, which corresponds to a deficit volume (relative to present) of 0.17 m ice-equivalent sea level. Our results suggest that remaining discrepancies between the model and the observations are likely associated with non-Greenland ice load, differences between modelled and observed present-day ice elevation around the margin, lateral variations in Earth structure and/or the pattern of ice margin retreat.
McKibben, R. B.; Connell, J. J.; Lopate, C.; Zhang, M.
2001-12-01
The High Energy Telescope (HET) of the Ulysses COSPIN experiment measures intensities of galactic cosmic rays and solar energetic particles (SEPs) with good energy and charge resolution at energies above about 30 MeV/n. Since passing over the South Polar regions of the Sun near solar maximum in late 2000 Ulysses has been rapidly traversing solar latitude in its so-called Fast Latitude Scan (FLS), passing through perihelion near the sun's equator in May 2001. Maximum northern latitude (80.2 deg N) will be reached in October 2001. HET observations since the onset of solar activity, including the South Polar pass and the first part of the FLS, show that SEPs from large events were commonly observed at both Ulysses and Earth (IMP-8) regardless of the radial, latitudinal, or longitudinal separations between Ulysses and Earth. During the decay phases of the events intensities were often almost equal at Ulysses and IMP, even when Ulysses was over the Sun's South Pole and the associated flare site was in the northern hemisphere. This suggests that propagation of particles across the average interplanetary magnetic field in the inner heliosphere is effective enough to relax longitudinal and latitudinal particle intensity gradients within a few days. For galactic cosmic rays, observations from the FLS so far show that latitudinal gradients resulting from solar modulation at solar maximum are sun's North Polar Regions, and discuss the significance of the results for models of energetic charged particle propagation through the heliosphere. * This work was supported in part by NASA Contract JPL-955432 and by NASA Grant NAG5-8032.
Takemura, Shunsuke; Kobayashi, Manabu; Yoshimoto, Kazuo
2016-10-01
Frequency-dependent model of the apparent radiation pattern has been extensively incorporated into engineering and scientific applications for high-frequency seismic waves, but distance-dependent properties have not yet been fully taken into account. We investigated the unified characteristics of frequency and distance dependences in both apparent P- and S-wave radiation patterns during local crustal earthquakes. Observed distortions of the apparent P- and S-wave radiation patterns could be simply modeled by using a function of the normalized hypocentral distance, which is a product of the wave number and hypocentral distance. This behavior suggests that major cause of distortion of the apparent radiation pattern is seismic wave scattering and diffraction within the heterogeneous crust. On the basis of observed normalized hypocentral distance dependency, we proposed a method for prediction of spatial distributions of maximum P- and S-wave amplitudes. Our method incorporating normalized hypocentral distance dependence of the apparent radiation pattern reproduced the observed spatial distributions of maximum P- and S-wave amplitudes over a wide frequency and distance ranges successfully.[Figure not available: see fulltext.
Control Architecture for Parallel-Connected Inverters in Uninterruptible Power Systems
Zhang, Chi; Guerrero, Josep M.; Quintero, Juan Carlos Vasquez;
2016-01-01
that guarantees synchronization with an external real/fictitious utility, and critical bus voltage amplitude restoration. Improved transient and steady-state frequency, active, reactive and harmonic power sharing, and global phase-locked loop resynchronization capability are achieved. Detailed system topology...... bus. The proposed control scheme comprises two layers: (i) a local layer that contains a “reactive power-to-phase droop” in order to synchronize the phase angle of each inverter and a virtual resistance loop that guarantees equal power sharing among inverters; and (ii) a central controller......In this paper, a control strategy for the parallel operation of three-phase inverters forming an online uninterruptible power system (UPS) is presented. The UPS system consists of a cluster of paralleled inverters with LC filters directly connected to an AC critical bus and an AC/DC forming a DC...
Design of an Autonomous Control for Parallel-Connected Uninterruptible Power Supplies
Sato, Eduardo Kazuhide; Kawamura, Atsuo
This paper proposes an autonomous control for parallel-connected uninterruptible power supply (UPS) systems based on electrical power system interrelations. The controllable variables are the output voltage phase angle and magnitude. Relation between active current and output voltage phase angle is derived from a synchronous machine model. Electrical power systems suggest that voltage regulation and reactive current can be proportionally related to yield another control equation. The resulted control scheme is very simple and only requires an output current measurement to provide a voltage reference signal locally in synchronism with other UPSs without communication signal exchange. A small-signal model represents the entire system and constitutes proof of its stability. Feasibility is confirmed by an experimental setup with three UPSs connected in parallel with different output power ratings. In the experiments, voltage limiters (1%) are employed and three cases are verified. Under all conditions, the results show excellent performance in terms of stability, and active and reactive load sharing.
Automatic Measurement for Internal Resistance of Battery in Uninterruptible Power Source
Mezitis, Mareks; Karevs, Vladimirs
2009-01-01
This paper considers the approach to the measurement of internal resistance of the battery in the uninterruptible power sources (UPSs [1]). Advantages of the approach are the measurements in power supplies without switching-off the battery, simplicity in realization of algorithm. The basic expressions of the theory used in the method about internal resistance of the storage battery are considered. The function chart of construction of an analog part of the scheme, and also algorithm of action of the scheme of logic of decision-making are considered. Construction of the tracing generator of load, the important part in realization of the method is stated. The use of the analog machine for processing of the results of measurements and a differential method of measurement with the purpose of increase the accuracy of the method is offered.
Sergio Saponara
2016-04-01
Full Text Available This work proposes a scalable architecture of an Uninterruptible Power Supply (UPS system, with predictive diagnosis capabilities, for safety critical applications. A Failure Mode and Effect Analysis (FMEA has identified the faults occurring in the energy storage unit, based on Valve Regulated Lead-Acid batteries, and in the 3-phase high power transformers, used in switching converters and for power isolation, as the main bottlenecks for power system reliability. To address these issues, a distributed network of measuring nodes is proposed, where vibration-based mechanical stress diagnosis is implemented together with electrical (voltage, current, impedance and thermal degradation analysis. Power system degradation is tracked through multi-channel measuring nodes with integrated digital signal processing in the transformed frequency domain, from 0.1 Hz to 1 kHz. Experimental measurements on real power systems for safety-critical applications validate the diagnostic unit.
Three phase classification of an uninterrupted traffic flow: a $k$-means clustering study
Kouhi, Reihaneh; Akbarzadeh, Meisam
2016-01-01
We investigate the speed time series of the vehicles recorded by a camera at a section of a highway in the city of Isfahan, Iran. Using $k$-means clustering algorithm, we find that the natural number of clustering for this set of data is $3$. This is in agreement with the three-phase theory of uninterrupted traffic flows. According to this theory, the three traffic phases are categorized as {\\em free flow} (F), {\\em synchronized} (S) and {\\em wide moving jam} (J). We obtain the transition speeds and densities at F-S and also S-J transitions. We also apply the Shannon entropy analysis on the speed time series over finite windows, which equips us to monitor in areal time the instant state of a traffic flow.
A. V. Belov
Full Text Available Ulysses, launched in October 1990, began its second out-of-ecliptic orbit in September 1997. In 2000/2001 the spacecraft passed from the south to the north polar regions of the Sun in the inner heliosphere. In contrast to the first rapid pole to pole passage in 1994/1995 close to solar minimum, Ulysses experiences now solar maximum conditions. The Kiel Electron Telescope (KET measures also protons and alpha-particles in the energy range from 5 MeV/n to >2 GeV/n. To derive radial and latitudinal gradients for >2 GeV/n protons and alpha-particles, data from the Chicago instrument on board IMP-8 and the neutron monitor network have been used to determine the corresponding time profiles at Earth. We obtain a spatial distribution at solar maximum which differs greatly from the solar minimum distribution. A steady-state approximation, which was characterized by a small radial and significant latitudinal gradient at solar minimum, was interchanged with a highly variable one with a large radial and a small – consistent with zero – latitudinal gradient. A significant deviation from a spherically symmetric cosmic ray distribution following the reversal of the solar magnetic field in 2000/2001 has not been observed yet. A small deviation has only been observed at northern polar regions, showing an excess of particles instead of the expected depression. This indicates that the reconfiguration of the heliospheric magnetic field, caused by the reappearance of the northern polar coronal hole, starts dominating the modulation of galactic cosmic rays already at solar maximum.
Key words. Interplanetary physics (cosmic rays; energetic particles – Space plasma physics (charged particle motion and acceleration
R. B. McKibben
Full Text Available In 2000–2001 Ulysses passed from the south to the north polar regions of the Sun in the inner heliosphere, providing a snapshot of the latitudinal structure of cosmic ray modulation and solar energetic particle populations during a period near solar maximum. Observations from the COSPIN suite of energetic charged particle telescopes show that latitude variations in the cosmic ray intensity in the inner heliosphere are nearly non-existent near solar maximum, whereas small but clear latitude gradients were observed during the similar phase of Ulysses’ orbit near the 1994–95 solar minimum. At proton energies above ~10 MeV and extending up to >70 MeV, the intensities are often dominated by Solar Energetic Particles (SEPs accelerated near the Sun in association with intense solar flares and large Coronal Mass Ejections (CMEs. At lower energies the particle intensities are almost constantly enhanced above background, most likely as a result of a mix of SEPs and particles accelerated by interplanetary shocks. Simultaneous high-latitude Ulysses and near-Earth observations show that most events that produce large flux increases near Earth also produce flux increases at Ulysses, even at the highest latitudes attained. Particle anisotropies during particle onsets at Ulysses are typically directed outwards from the Sun, suggesting either acceleration extending to high latitudes or efficient cross-field propagation somewhere inside the orbit of Ulysses. Both cosmic ray and SEP observations are consistent with highly efficient transport of energetic charged particles between the equatorial and polar regions and across the mean interplanetary magnetic fields in the inner heliosphere.
Key words. Interplanetary physics (cosmic rays – Solar physics, astrophysics and astronomy (energetic particles; flares and mass ejections
McKibben, R. B.; Connell, J. J.; Lopate, C.; Zhang, M.; Anglin, J. D.; Balogh, A.; dalla, S.; Sanderson, T. R.; Marsden, R. G.; Hofer, M. Y.; Kunow, H.; Posner, A.; Heber, B.
2003-06-01
In 2000-2001 Ulysses passed from the south to the north polar regions of the Sun in the inner heliosphere, providing a snapshot of the latitudinal structure of cosmic ray modulation and solar energetic particle populations during a period near solar maximum. Observations from the COSPIN suite of energetic charged particle telescopes show that latitude variations in the cosmic ray intensity in the inner heliosphere are nearly non-existent near solar maximum, whereas small but clear latitude gradients were observed during the similar phase of Ulysses' orbit near the 1994-95 solar minimum. At proton energies above ~10 MeV and extending up to >70 MeV, the intensities are often dominated by Solar Energetic Particles (SEPs) accelerated near the Sun in association with intense solar flares and large Coronal Mass Ejections (CMEs). At lower energies the particle intensities are almost constantly enhanced above background, most likely as a result of a mix of SEPs and particles accelerated by interplanetary shocks. Simultaneous high-latitude Ulysses and near-Earth observations show that most events that produce large flux increases near Earth also produce flux increases at Ulysses, even at the highest latitudes attained. Particle anisotropies during particle onsets at Ulysses are typically directed outwards from the Sun, suggesting either acceleration extending to high latitudes or efficient cross-field propagation somewhere inside the orbit of Ulysses. Both cosmic ray and SEP observations are consistent with highly efficient transport of energetic charged particles between the equatorial and polar regions and across the mean interplanetary magnetic fields in the inner heliosphere.
Zhang, Chi; Guerrero, Josep M.; Vasquez, Juan Carlos
2015-01-01
In this paper, a control strategy for the parallel operation of three-phase inverters forming an online uninterruptible power system (UPS) is presented. The UPS system consists of a cluster of paralleled inverters with LC filters directly connected to an AC critical bus and an AC/DC forming a DC ...
Albani, Samuel [University of Siena, Graduate School in Polar Sciences, Siena (Italy); University of Milano-Bicocca, Department of Environmental Sciences, Milano (Italy); Cornell University, Department of Earth and Atmospheric Sciences, Ithaca, NY (United States); Mahowald, Natalie M. [Cornell University, Department of Earth and Atmospheric Sciences, Ithaca, NY (United States); Delmonte, Barbara; Maggi, Valter [University of Milano-Bicocca, Department of Environmental Sciences, Milano (Italy); Winckler, Gisela [Columbia University, Lamont-Doherty Earth Observatory, Palisades, NY (United States); Columbia University, Department of Earth and Environmental Sciences, New York, NY (United States)
2012-05-15
Mineral dust aerosols represent an active component of the Earth's climate system, by interacting with radiation directly, and by modifying clouds and biogeochemistry. Mineral dust from polar ice cores over the last million years can be used as paleoclimate proxy, and provide unique information about climate variability, as changes in dust deposition at the core sites can be due to changes in sources, transport and/or deposition locally. Here we present results from a study based on climate model simulations using the Community Climate System Model. The focus of this work is to analyze simulated differences in the dust concentration, size distribution and sources in current climate conditions and during the Last Glacial Maximum at specific ice core locations in Antarctica, and compare with available paleodata. Model results suggest that South America is the most important source for dust deposited in Antarctica in current climate, but Australia is also a major contributor and there is spatial variability in the relative importance of the major dust sources. During the Last Glacial Maximum the dominant source in the model was South America, because of the increased activity of glaciogenic dust sources in Southern Patagonia-Tierra del Fuego and the Southernmost Pampas regions, as well as an increase in transport efficiency southward. Dust emitted from the Southern Hemisphere dust source areas usually follow zonal patterns, but southward flow towards Antarctica is located in specific areas characterized by southward displacement of air masses. Observations and model results consistently suggest a spatially variable shift in dust particle sizes. This is due to a combination of relatively reduced en route wet removal favouring a generalized shift towards smaller particles, and on the other hand to an enhanced relative contribution of dry coarse particle deposition in the Last Glacial Maximum. (orig.)
Borg, Søren; Persson, U.; Jess, T.;
2010-01-01
Hospital, Copenhagen, Denmark, during 1991 to 1993. The data were aggregated over calendar years; for each year, the number of relapses and the number of surgical operations were recorded. Our aim was to estimate Markov models for disease activity in CD and UC, in terms of relapse and remission...... data and has good face validity. The disease activity model is less suitable for UC due to its transient nature through the presence of curative surgery......, with a cycle length of 1 month. The purpose of these models was to enable evaluation of interventions that would shorten relapses or postpone future relapses. An exact maximum likelihood estimator was developed that disaggregates the yearly observations into monthly transition probabilities between remission...
Park, Jaeheung; Min, Kyoung Wook; Kim, Vitaly P.; Kil, Hyosub; Lee, Jae-Jin; Kim, Hee-Jun; Lee, Ensang; Lee, Dae Young
2005-07-01
We investigated the global distribution of equatorial plasma bubbles (EPBs) using in situ plasma density measurements from Korea Multipurpose Satellite-1 (KOMPSAT-1) and Defense Meteorological Satellite Program (DMSP) F15 during the solar maximum period from June 2000 to August 2001. The results were generally consistent with those of previous studies. EPBs were observed at all longitudes around the magnetic dip equator in the equinoctial seasons with the peak occurrence in the American-Atlantic-African regions. During the June solstice, EPBs occurred predominantly in the African sector, with enhancements in the magnetic north in the Indian and west Pacific regions, but were totally suppressed in the American-Atlantic sector. During the December solstice, EPBs occurred frequently in the American-Atlantic sector but were suppressed in the other longitude sectors, especially in the Pacific sector. The EPB occurrence probability was seen to be correlated with the observed topside plasma density and the model prereversal upward drift speed of ambient plasmas (Fejer et al., 1999), with their respective dominance dependent on the seasons. However, the peak EPB occurrence in the American-Atlantic sector during the December solstice was displaced somewhat from the region of peak density and upward drift, probably due to a strong solar terminator influence on the flux tube-integrated E region Pedersen conductivity and due to anomaly morphology. The peak EPB occurrence in the African sector during the June solstice is consistent only with the high ambient density in that region, for there was no coincidence with the maximum vertical drift or the minimum E region Pedersen conductivity.
Design and control of a novel two-speed Uninterrupted Mechanical Transmission for electric vehicles
Fang, Shengnan; Song, Jian; Song, Haijun; Tai, Yuzhuo; Li, Fei; Sinh Nguyen, Truong
2016-06-01
Conventional all-electric vehicles (EV) adopt single-speed transmission due to its low cost and simple construction. However, with the adoption of this type of driveline system, development of EV technology leads to the growing performance requirements of drive motor. Introducing a multi-speed or two-speed transmission to EV offers the possibility of efficiency improvement of the whole powertrain. This paper presents an innovative two-speed Uninterrupted Mechanical Transmission (UMT), which consists of an epicyclic gearing system, a centrifugal clutch and a brake band, allowing the seamless shifting between two gears. Besides, driver's intention is recognized by the control system which is based on fuzzy logic controller (FLC), utilizing the signals of vehicle velocity and accelerator pedal position. The novel UMT shows better dynamic and comfort performance in compare with the optimized AMT with the same gear ratios. Comparison between the control strategy with recognition of driver intention and the conventional two-parameter gear shifting strategy is presented. And the simulation and analysis of the middle layer of optimal gearshift control algorithm is detailed. The results indicate that the UMT adopting FLC and optimal control method provides a significant improvement of energy efficiency, dynamic performance and shifting comfort for EV.
High efficiency fuel cell based uninterruptible power supply for digital equipment
Gonzales, James; Tamizhmani, Govindasamy
Eliminating the ac-dc converter (such as a computer's power supply), in a dc system when using a fuel cell based uninterruptible power supply (UPS), serves several primary functions. Firstly, it eliminates the need for a dc-ac inverter, and secondly, it eliminates a usually highly inefficient component-the power supply. Multiple conversions result in multiple inefficiencies. By replacing the computer's ac power supply with a high efficiency dc power supply capable of operating directly from a fuel cell - and thereby eliminating the inverter - the overall efficiency of the UPS can be increased by 50% or more. This is essential considering that the primary function of a fuel cell based UPS is long-term operation of the system, and poor efficiency equates to higher fuel consumption. Furthermore, inefficient systems have greater power demands, and therefore a larger fuel cell stack is needed to power them. At the present cost of fuel cell systems, this is a considerable problem. The easiest way to accomplish a direct dc UPS is to replace the computer's ac-dc power supply with a dc-dc power supply.
Weissbach, Robert Stephen
Due to recent technological advances in materials, power electronics, magnetic bearings and controls, the flywheel energy storage system has become a viable alternative to electrochemical batteries. The advantages of the flywheel system are its higher power density, insensitivity to environmental conditions, lack of hazardous materials and ease of checking the charge. One potential use is in a power distribution system. The flywheel energy storage system may be used as both an uninterruptible power supply as well as a means of dynamic voltage compensation to protect critical loads on radial distribution feeders. To perform dynamic voltage compensation, a comparison was performed which shows that the series injection of power is preferable to the shunt injection of power in utilizing the available kVA of the flywheel system motor/generator. The system was designed and modeled using the Electromagnetic Transients Program to ensure a proper dynamic response of the flywheel energy storage system in either mode of operation. The design incorporates a boost converter on the dc link to enable the load voltage to be maintained as the flywheel spins down. The same boost converter also allows for extended operation in the series compensation mode, by implementing a novel control scheme where sinusoidal pulse width modulation control is used for to compensate for smaller supply voltage dips, while the boost converter is used to control the compensation for larger supply voltage dips.
Occupational exposure to electromagnetic fields of uninterruptible power supply industry workers.
Teşneli, N Berna; Teşneli, Ahmet Y
2014-12-01
There is an increasing concern that exposure to extremely low-frequency (ELF) electromagnetic fields (EMFs) may cause or contribute to adverse health effects. To assess exposure to ELF EMFs, electric and magnetic field spot measurements were performed extensively at the workplace of a worldwide uninterruptible power supply (UPS) factory. The measurements were carried out in order to get the electric and magnetic field exposure results in real working situations in test areas, production lines and power substations. The electric and magnetic fields reached up to 992.0 V m(-1) and 215.6 μT in the test areas, respectively. The fields existed up to 26.7 V m(-1) and 7.6 μT in the production lines. The field levels in the vicinity of the power substations did not exceed 165.5 V m(-1) and 65 μT. The data presented are useful in determining the occupational exposure levels of UPS industry workers. The measurements are below the reference levels recommended by the guideline published in 2010 by the International Commission on Non-Ionizing Radiation Protection and action levels of the directive adopted in 2013 by European Parliament and Council.
Intelligent uninterruptible power supply system with back-up fuel cell/battery hybrid power source
Zhan, Yuedong; Guo, Youguang; Zhu, Jianguo; Wang, Hua
2008-05-01
This paper presents the development of an intelligent uninterruptible power supply (UPS) system with a hybrid power source that comprises a proton-exchange membrane fuel cell (PEMFC) and a battery. Attention is focused on the architecture of the UPS hybrid system and the data acquisition and control of the PEMFC. Specifically, the hybrid UPS system consists of a low-cost 60-cell 300 W PEMFC stack, a 3-cell lead-acid battery, an active power factor correction ac-dc rectifier, a half-bridge dc-ac inverter, a dc-dc converter, an ac-dc charger and their control units based on a digital signal processor TMS320F240, other integrated circuit chips, and a simple network management protocol adapter. Experimental tests and theoretical studies are conducted. First, the major parameters of the PEMFC are experimentally obtained and evaluated. Then an intelligent control strategy for the PEMFC stack is proposed and implemented. Finally, the performance of the hybrid UPS system is measured and analyzed.
Development and Testing of an Ultracapacitor Based Uninterruptible Power Supply (UPS) System
Eichenberg, Dennis J.
2010-01-01
The NASA Glenn Research Center (GRC) initiated the development and testing of an ultracapacitor based uninterruptible power supply (UPS) system as a means to provide backup power for the many critical NASA applications. A UPS system typically utilizes batteries for energy storage. The battery is the most vulnerable part of the UPS system, requiring regular maintenance and replacement. Battery performance is also extremely temperature dependent. Ultracapacitors are ideal for UPS systems where long life, maintenance free operation, and excellent low temperature performance is essential. State of the art symmetric ultracapacitors were used for these tests. The ultracapacitors were interconnected in an innovative configuration to minimize interconnection impedance, and to provide voltage balancing. Ultracapacitors can be charged extremely rapidly and supply high current, which are essential characteristics for an effective UPS system. Charging ultracapacitors is significantly less complex than charging batteries since there is no chemical reaction occurring while charging ultracapacitors. The report concludes that the implementation of symmetric ultracapacitors in a UPS system can provide significant improvements in power system performance and reliability.
Ewelina Gaszynska
2014-01-01
Full Text Available Objective. Advanced airway management, endotracheal intubation (ETI, during CPR is more difficult than, for example, during anesthesia. However, new devices such as video laryngoscopes should help in such circumstances. The aim of this study was to assess the performance of the KingVision video laryngoscopes in a manikin cardiopulmonary resuscitation (CPR scenario. Methods. Thirty students enrolled in the third year of paramedic school took part in the study. The simulated CPR scenario was ETI using the standard laryngoscope with a Macintosh blade (MCL and ETI using the KingVision video laryngoscope performed during uninterrupted chest compressions. The primary endpoints were the time needed for ETI and the success ratio. Results. The mean time required for intubation was similar for both laryngoscopes: 16.6 (SD 5.11, median 15.64, range 7.9–27.9 seconds versus 17.91 (SD 5.6, median 16.28, range 10.6–28.6 seconds for the MCL and KingVision, respectively (P=0.1888. On the first attempt at ETI, the success rate during CPR was comparable between the evaluated laryngoscopes: P=0.9032. Conclusion. The KingVision video laryngoscope proves to be less superior when used for endotracheal intubation during CPR compared to the standard laryngoscope with a Mackintosh blade. This proves true in terms of shortening the time needed for ETI and increasing the success ratio.
大鼠不间断奔跑对生长期骨骼健壮性影响分析%The Effect of Uninterrupted Running on Bone Robustness in Growth Period Rat
陈军
2014-01-01
Objective: to analyze uninterrupted running effects on growing bones robustness. Methods: 24 only four weeks female SD rats were randomly divided into 3 groups (control group, intermittent running motion and uninterrupted treadmill exercise group). Discontinuous and uninterrupted treadmill exercise groups were treated respectively with seven weeks, five times a week, and every time of 6 min treadmill exercise. At the end of the experiment, tibia bone of rat’s hind legs were taken to detect the mineral content and make three point bending experiment as well as other related physiological and biochemical indicators of bone. Results: compared with control group, calcitonin, parathyroid hormone, alkaline phosphatase and osteocalcin of the rats bone in uninterrupted treadmill exercise group were significantly reduced, while the indicators such as deoxypyridinoline, maximum load, elastic load and the bone mineral content except the bone ash were significantly increased. Elastic load of the bone in discontinuous treadmill exercise group was significantly higher than the control group and uninterrupted treadmill exercise group, but the maximum deflection of rat’s bone was significantly lower than the uninterrupted treadmill exercise group. Conclusion:continuous running can improve bone mineral content of rat bone tibia during the growth period, enhance the biomechanical characteristics of the rat bone, increase the ability of deformation resistance and fracture resistance of bone, as well as the robustness of the bones in rats.%目的：分析大鼠不间断奔跑对生长期骨骼健壮性的影响。方法：将24只4周龄雌性SD大鼠随机分为3组（对照组、间断跑台运动组及不间断跑台运动组）。间断和不间断跑台运动组分别进行7周，每周5次，每次6 min，间隔10 min的跑台运动。实验后取大鼠后肢胫骨进行骨矿含量以及三点弯曲实验，及测定大鼠骨骼的生理生化指标。结果：与对照组
Hayes, Christopher Ruslan
2012-02-01
INTRODUCTION: A recent single-center report indicated that the performance of atrial fibrillation ablation in patients on uninterrupted warfarin using a conventional deflectable tip electrode ablation catheter may be as safe as periprocedural discontinuation of warfarin and bridging with heparin. Novel multi-electrode array catheters for atrial fibrillation ablation are currently undergoing clinical evaluation. While offering the possibility of more rapid atrial fibrillation ablation, they are stiffer and necessitate the deployment of larger deflectable transseptal sheaths, and it remains to be determined if they increase the risk of cardiac perforation and vascular injury. Such potential risks would have implications for a strategy of uninterrupted periprocedural anticoagulation. METHOD AND RESULTS: We audited the safety outcomes of our atrial fibrillation ablation procedures using multi-electrode array ablation catheters in patients on uninterrupted warfarin (CHADS2 score>or=2) and in patients not on warfarin (uninterrupted aspirin). Two bleeding complications occurred in 49 patients on uninterrupted warfarin, both of which were managed successfully without longterm sequelae, and no bleeding complication occurred in 32 patients not on warfarin (uninterrupted aspirin). There were no thromboembolic events or other complication with either anticoagulant regimen. CONCLUSION: Despite the larger diameter and increased stiffness of multi-electrode array catheters and their deflectable transseptal sheaths, their use for catheter ablation in patients with atrial fibrillation on uninterrupted warfarin in this single-center experience does not appear to be unsafe, and thus, an adequately powered multicenter prospective randomized controlled trial should be considered.
2003-01-01
This document concerns the award of a contract, without competitive tendering, for the maintenance of uninterruptable power supply systems. The Finance Committee is invited to agree to the negotiation of a contract, without competitive tendering, for the maintenance of uninterruptable power supply systems with MGE (FR) for a total amount of 575 000 euros (911 000 Swiss francs), covering an initial period of five years, subject to revision for inflation after 1 January 2007. The contract will include options for two one-year extensions beyond the initial five-year period. The amount in Swiss francs has been calculated using the present rate of exchange. The firm has indicated the following distribution by country of the contract value covered by this adjudication proposal: FR - 100%.
2000-01-01
This document concerns the award of a blanket contract for the supply and maintenance of uninterruptable power supplies (UPS). Following a market survey carried out among 75 firms in eighteen Member States, a call for tenders (IT-2746/ST) was sent on 7 April 2000 to nine firms in four Member States. By the closing date, CERN had received tenders from six firms in four Member States. The Finance Committee is invited to agree to the negotiation of a blanket contract with GUTOR (CH), the lowest bidder after realignment, for the supply and maintenance of uninterruptable power supplies for a total amount of 5 000 000 Swiss francs, not subject to revision until 31 December 2002. The firm has indicated the following distribution by country of the contract value covered by this adjudication proposal: DK?54.3%, CH?23.7%, IT?10%, DE?10%, IE?1% and JP?1%.
Filling in the juvenile magmatic gap: Evidence for uninterrupted Paleoproterozoic plate tectonics
Partin, C. A.; Bekker, A.; Sylvester, P. J.; Wodicka, N.; Stern, R. A.; Chacko, T.; Heaman, L. M.
2014-02-01
Despite several decades of research on growth of the continental crust, it remains unclear whether the production of juvenile continental crust has been continuous or episodic throughout the Precambrian. Models for episodic crustal growth have gained traction recently through compilations of global U-Pb zircon age frequency distributions interpreted to delineate peaks and lulls in crustal growth through geologic time. One such apparent trough in zircon age frequency distributions between ∼2.45 and 2.22 Ga is thought to represent a pause in crustal addition, resulting from a global shutdown of magmatic and tectonic processes. The ∼2.45-2.22 Ga magmatic shutdown model envisions a causal relationship between the cessation of plate tectonics and accumulation of atmospheric oxygen over the same period. Here, we present new coupled U-Pb, Hf, and O isotope data for detrital and magmatic zircon from the western Churchill Province and Trans-Hudson orogen of Canada, covering an area of approximately 1.3 million km2, that demonstrate significant juvenile crustal production during the ∼2.45-2.22 Ga time interval, and thereby argue against the magmatic shutdown hypothesis. Our data is corroborated by literature data showing an extensive 2.22-2.45 Ga record in both detrital and magmatic rocks on every continent, and suggests that the operation of plate tectonics continued throughout the early Paleoproterozoic, while atmospheric oxygen rose over the same time interval. We argue that uninterrupted plate tectonics between ∼2.45 and 2.22 Ga would have contributed to efficient burial of organic matter and sedimentary pyrite, and the consequent rise in atmospheric oxygen documented for this time interval.
Proglacial lake sediments – a basis for uninterrupted chronicles of the Holocene glacier variations
M. Y. Alexandrin
2015-01-01
Full Text Available The article covers the origin of paleolimnological method in glaciology, concerns the theoretical background of the approach, and focuses on the principal methods of analysis of the lake sediments and creating the sedimentary age-depth models. Lake sediments can provide a basis for creating uninterrupted reconstructions of the Holocene glacier variations with high resolution. The fundament of paleolimnological method is based on the differences between glacial and non-glacial components of the bottom sediments of proglacial lakes. The glacial signal in the lake sediments was originally distinguished by measuring the organic content of the sediment (normally with loss-on-ignition and the magnetic properties of the sediment. Subsequent methods of analysis could yield more precision and normally include geochemical composition (with the use of high-resolution scanning x-ray fluorescence analysis, use of biogenic indicators (such as pollen and diatoms contained in the sediment and more. Obtaining the most accurate age of the sediment is a crucial question in subsequent application of the sediment parameters for reconstruction of glacier variability. The article covers various methods of dating the lake sediment – radiocarbon, Cs- and Pb-isotope dating, varve counting. Techniques of creating age-depth models are taken into account. A state-of-the-art application of sedimentary properties in paleoglaciology yields a reconstruction of a former equilibrium line altitude – ELA. The article focuses on the basis of the ELA reconstruction approach. Successful examples of reconstructions of glacier variations based on the lake sediments can be found throughout the majority of the glaciated regions of the planet. The article states the most prominent of them and gives an update on the current progress in paleolimnological research in the Caucasus Mountains.
Maximum information photoelectron metrology
Hockett, P; Wollenhaupt, M; Baumert, T
2015-01-01
Photoelectron interferograms, manifested in photoelectron angular distributions (PADs), are a high-information, coherent observable. In order to obtain the maximum information from angle-resolved photoionization experiments it is desirable to record the full, 3D, photoelectron momentum distribution. Here we apply tomographic reconstruction techniques to obtain such 3D distributions from multiphoton ionization of potassium atoms, and fully analyse the energy and angular content of the 3D data. The PADs obtained as a function of energy indicate good agreement with previous 2D data and detailed analysis [Hockett et. al., Phys. Rev. Lett. 112, 223001 (2014)] over the main spectral features, but also indicate unexpected symmetry-breaking in certain regions of momentum space, thus revealing additional continuum interferences which cannot otherwise be observed. These observations reflect the presence of additional ionization pathways and, most generally, illustrate the power of maximum information measurements of th...
Graefen, R.
2002-03-01
Computer centers always have the same problems: A low budget necessitates low-cost products which on the other hand should have high availability and a capacity for enhancement as the infrastructure is growing. Uninterrupted power supply systems offer solutions with new concepts and novel equipment. [German] Rechenzentrumbetreiber haben alle dieselben Probleme: Ein geringes Budget zwingt zum Einkauf kostenguenstiger Produkte, die dennoch hochverfuegbar sein sollen und die beim Ausbau der Infrastruktur mitwachsen koennen. Diese Anforderungen erfuellen die Hersteller unterbrechungsfreier Stromversorgungen (USV) mit neuen Konzepten und Geraeten. (orig.)
Research on the Choice of Uninterrupted Power Supply%不间断电源的选择研究
胡晓东; 程鹏; 牛明国
2013-01-01
就运行方式、备份、带负载能力等对UPS（不间断电源）系统的选择进行探讨，最后对“十二五”期间特大功率UPS的选择谈了笔者的观点。%This paper discuss the choice of UPS ( Uninterrupted Power Supply ) about it's operation mode、back-up and load capacity and so on .Writer gives opinion on the choice of Superpower UPS during the 12th Five-Year Plan.
Suntio, Teuvo
1992-01-01
A study to find the essential and important matters which can effect the reliable uninterrupted operation of telecommunications power supply systems and to suggest an optimal uncertainty management scheme is reported. The main goal was to find simple and practical but effective methods on which the uncertainty management and the implementation of its tool can be based. Uncertainty management ensures that there is enough reserve energy and minimizes additional uncertainties. It turned out that an optimal solution can be obtained by means of intelligent supervision, control and alarm facilities by utilizing human reasoning methodology, and minimize-uncertainty principles.
Han, Xianglu; Price, Paul S
2011-12-01
The maximum cumulative ratio (MCR) developed in previous work is a tool to evaluate the need to perform cumulative risk assessments. MCR is the ratio of the cumulative exposures to multiple chemicals to the maximum exposure from one of the chemicals when exposures are described using a common metric. This tool is used to evaluate mixtures of chemicals measured in samples of untreated ground water as source for drinking water systems in the United States. The mixtures of chemicals in this dataset differ from those examined in our previous work both in terms of the predicted toxicity and compounds measured. Despite these differences, MCR values in this study follow patterns similar to those seen earlier. MCR values for the mixtures have a mean (range) of 2.2 (1.03-5.4) that is much smaller than the mean (range) of 16 (5-34) in the mixtures in previous study. The MCR values of the mixtures decline as Hazard Index (HI) values increase. MCR values for mixtures with larger HI values are not affected by possible contributions from chemicals that may occur at levels below the detection limits. This work provides a second example of use of the MCR tool in the evaluation of mixtures that occur in the environment.
Zhang, Zhi-Shan; Zhao, Yang; Li, Xin-Rong; Huang, Lei; Tan, Hui-Juan
2016-05-01
In water-limited regions, rainfall interception is influenced by rainfall properties and crown characteristics. Rainfall properties, aside from gross rainfall amount and duration (GR and RD), maximum rainfall intensity and rainless gap (RG), within rain events may heavily affect throughfall and interception by plants. From 2004 to 2014 (except for 2007), individual shrubs of Caragana korshinskii and Artemisia ordosica were selected to measure throughfall during 210 rain events. Various rainfall properties were auto-measured and crown characteristics, i.e., height, branch and leaf area index, crown area and volume of two shrubs were also measured. The relative interceptions of C. korshinskii and A. ordosica were 29.1% and 17.1%, respectively. Rainfall properties have more contributions than crown characteristics to throughfall and interception of shrubs. Throughfall and interception of shrubs can be explained by GR, RI60 (maximum rainfall intensities during 60 min), RD and RG in deceasing importance. However, relative throughfall and interception of two shrubs have different responses to rainfall properties and crown characteristics, those of C. korshinskii were closely related to rainfall properties, while those of A. ordosica were more dependent on crown characteristics. We highlight long-term monitoring is very necessary to determine the relationships between throughfall and interception with crown characteristics.
Xianglu Han
2011-12-01
Full Text Available The maximum cumulative ratio (MCR developed in previous work is a tool to evaluate the need to perform cumulative risk assessments. MCR is the ratio of the cumulative exposures to multiple chemicals to the maximum exposure from one of the chemicals when exposures are described using a common metric. This tool is used to evaluate mixtures of chemicals measured in samples of untreated ground water as source for drinking water systems in the United States. The mixtures of chemicals in this dataset differ from those examined in our previous work both in terms of the predicted toxicity and compounds measured. Despite these differences, MCR values in this study follow patterns similar to those seen earlier. MCR values for the mixtures have a mean (range of 2.2 (1.03–5.4 that is much smaller than the mean (range of 16 (5–34 in the mixtures in previous study. The MCR values of the mixtures decline as Hazard Index (HI values increase. MCR values for mixtures with larger HI values are not affected by possible contributions from chemicals that may occur at levels below the detection limits. This work provides a second example of use of the MCR tool in the evaluation of mixtures that occur in the environment.
He, Yongmin; Chen, Wanjun; Zhou, Jinyuan; Li, Xiaodong; Tang, Pengyi; Zhang, Zhenxing; Fu, Jiecai; Xie, Erqing
2014-01-08
A type of freestanding three-dimensional (3D) micro/nanointerconnected structure, with a conjunction of microsized 3D graphene networks, nanosized 3D carbon nanofiber (CNF) forests, and consequently loaded MnO2 nanosheets, has been designed as the electrodes of an ultralight flexible supercapacitor. The resulting 3D graphene/CNFs/MnO2 composite networks exhibit remarkable flexibility and highly mechanical properties due to good and intimate contacts among them, without current collectors and binders. Simultaneously, this designed 3D micro/nanointerconnected structure can provide an uninterrupted double charges freeway network for both electron and electrolyte ion to minimize electron accumulation and ion-diffusing resistance, leading to an excellent electrochemical performance. The ultrahigh specific capacitance of 946 F/g from cyclic voltammetry (CV) (or 920 F/g from galvanostatic charging/discharging (GCD)) were obtained, which is superior to that of the present electrode materials based on 3D graphene/MnO2 hybrid structure (482 F/g). Furthermore, we have also investigated the superior electrochemical performances of an asymmetric supercapacitor device (weight of less than 12 mg/cm(2) and thickness of ~0.8 mm), showing a total capacitance of 0.33 F/cm(2) at a window voltage of 1.8 V and a maximum energy density of 53.4 W h/kg for driving a digital clock for 42 min. These inspiring performances would make our designed supercapacitors become one of the most promising candidates for the future flexible and lightweight energy storage systems.
Xu, Li; Liu, Lanlan; Niu, Jie; Tang, Li; Li, Jinliang; Zhou, Zhanfan; Long, Chenhai; Yang, Qi; Yi, Ziqi; Guo, Hao; Long, Yang; Fu, Yanyi
2017-05-01
As social requirement of power supply reliability keeps rising, distribution network working with power uninterrupted has been widely carried out, while the high - temperature operating environment in summer can easily lead to physical discomfort for the operators, and then lead to safety incidents. Aiming at above problem, air-conditioning suit for distribution network working with power uninterrupted has been putted forward in this paper, and the structure composition and cooling principle of which has been explained, and it has been ultimately put to on-site application. The results showed that, cooling effect of air-conditioning suits was remarkable, and improved the working environment for the operators effectively, which is of great significance to improve Chinese level of working with power uninterrupted, reduce the probability of accidents and enhance the reliability of power supply.
Beloglazov, M. I.; Akhmetov, O. I.
2010-12-01
On the basis of the two-component measurements of the atmospheric noise electromagnetic field on the Kola Peninsula, a change in the first Schumann resonance (SR-1) as an indicator of global lightning formation is studied depending on the level of galactic cosmic rays (GCRs). It is found that the effect of GCRs is most evident during five months: in January and from September to December; in this case the SR-1 intensity in 2001 was higher than the level of 2007 by a factor of 1.5 and more. This effect almost disappears when the regime of the Northern Hemisphere changes into the summer regime. It is assumed that an increase in the GCR intensity results in an increase in the lightning occurrence frequency; however, the probability that the power of each lightning stroke decreases owing to an early disruption of the charge separation and accumulation processes in a thundercloud increases; on the contrary, a decrease in the GCR intensity decreases lightning stroke occurrence frequency and simultaneously increases the probability of accumulating a higher energy by a thundercloud and increasing the lightning power to the maximum possible values.
Mitigation of EMI/RFI produced by a 1.2 kW uninterruptible power supply
Mikros, Efthimios
1993-09-01
Recently installed equipment in naval receiving sites, such as Uninterruptible Power Supplies (UPS), digital telephone switching systems, and personal computers, inject noise into receiver systems via power conductors, cable shields, and grounds, thus reducing the probability of intercept of a signal of interest in the 2-100 NMHz range. In this thesis a survey of EMI/RFI sources at receiving sites is performed. The effectiveness of a Barrier-Filter-Ground architecture in containing/eliminating EMI/RFI from a 1.2 kW UPS is tested. The spectral and temporal properties of the EMI/RFI from the UPS are recorded. Estimates for the EMI/RFI power are obtained from 60Hz to 100kHz, and a possible solution is proposed for obtaining noise power estimates for higher frequencies.
Berg, R.; Stroinski, M.; Giachetti, R. [Multiple Dynamics Corp., Southfield, MI (United States)
1994-02-01
This Aging Management Guideline (AMG) describes recommended methods for effective detection and mitigation of age-related degradation mechanisms in BWR and PWR commercial nuclear power plant battery chargers, inverters and uninterruptible power supplies important to license renewal. The intent of this AMG is to assist plant maintenance and operations personnel in maximizing the safe, useful life of these components. It also supports the documentation of effective aging management programs required under the License Renewal Rule 10 CFR Part 54. This AMG is presented in a manner that allows personnel responsible for performance analysis and maintenance to compare their plant-specific aging mechanisms (expected or already, experienced) and aging management program activities to the more generic results and recommendations presented herein.
Wang, Chao; Sun, Limin; Lichtenwalter, Ben; Zerkle, Brent; Okada, Yoshio
2016-06-01
A closed-cycle helium recycler was developed for continuous uninterrupted operation for magnetometer-based whole-head magnetoencephalography (MEG) systems. The recycler consists of a two stage 4 K pulse-tube cryocooler and is mounted on the roof of a magnetically shielded room (MSR). A flexible liquid helium (LHe) return line on the recycler is inserted into the fill port of the MEG system in the MSR through a slotted opening in the ceiling. The helium vapor is captured through a line that returns the gas to the top of the recycler assembly. A high-purity helium gas cylinder connected to the recycler assembly supplies the gas, which, after it is liquefied, increases the level of LHe in the MEG system during the start-up phase. No storage tank for evaporated helium gas nor a helium gas purifier is used. The recycler is capable of liquefying helium with a rate of ∼17 L/d after precooling the MEG system. It has provided a fully maintenance-free operation under computer control for 7 months without refill of helium. Although the recycler is used for single-orientation operation at this initial testing site, it is designed to operate at ±20° orientations, allowing the MEG system to be tilted for supine and reclining positions. Vibration of the recycler is dampened to an ultra-low level by using several vibration isolation methods, which enables uninterrupted operation during MEG measurements. Recyclers similar to this system may be quite useful even for MEG systems with 100% magnetometers.
Tang, Y.; Yao, W.; Blaabjerg, Frede
2015-01-01
In single-phase uninterruptible power supply (UPS) applications, it is well known that the AC side instantaneous power is not constant by nature. The resulting input current from the DC source side will inevitably contain low frequency ripple components that may largely deteriorate the system...
Maximum Autocorrelation Factorial Kriging
Nielsen, Allan Aasbjerg; Conradsen, Knut; Pedersen, John L.
2000-01-01
This paper describes maximum autocorrelation factor (MAF) analysis, maximum autocorrelation factorial kriging, and its application to irregularly sampled stream sediment geochemical data from South Greenland. Kriged MAF images are compared with kriged images of varimax rotated factors from...
F. TopsÃƒÂ¸e
2001-09-01
Full Text Available Abstract: In its modern formulation, the Maximum Entropy Principle was promoted by E.T. Jaynes, starting in the mid-fifties. The principle dictates that one should look for a distribution, consistent with available information, which maximizes the entropy. However, this principle focuses only on distributions and it appears advantageous to bring information theoretical thinking more prominently into play by also focusing on the "observer" and on coding. This view was brought forward by the second named author in the late seventies and is the view we will follow-up on here. It leads to the consideration of a certain game, the Code Length Game and, via standard game theoretical thinking, to a principle of Game Theoretical Equilibrium. This principle is more basic than the Maximum Entropy Principle in the sense that the search for one type of optimal strategies in the Code Length Game translates directly into the search for distributions with maximum entropy. In the present paper we offer a self-contained and comprehensive treatment of fundamentals of both principles mentioned, based on a study of the Code Length Game. Though new concepts and results are presented, the reading should be instructional and accessible to a rather wide audience, at least if certain mathematical details are left aside at a rst reading. The most frequently studied instance of entropy maximization pertains to the Mean Energy Model which involves a moment constraint related to a given function, here taken to represent "energy". This type of application is very well known from the literature with hundreds of applications pertaining to several different elds and will also here serve as important illustration of the theory. But our approach reaches further, especially regarding the study of continuity properties of the entropy function, and this leads to new results which allow a discussion of models with so-called entropy loss. These results have tempted us to speculate over
Gorkem Sen
2016-03-01
Full Text Available Grid-enabled vehicles (GEVs such as plug-in electric vehicles present environmental and energy sustainability advantages compared to conventional vehicles. GEV runs solely on power generated by its own battery group, which supplies power to its electric motor. This battery group can be charged from external electric sources. Nowadays, the interaction of GEV with the power grid is unidirectional by the charging process. However, GEV can be operated bi-directionally by modifying its power unit. In such operating conditions, GEV can operate as an uninterruptible power supply (UPS and satisfy a portion or the total energy demand of the consumption center independent from utility grid, which is known as vehicle-to-home (V2H. In this paper, a power unit is developed for GEVs in the laboratory to conduct simulation and experimental studies to test the performance of GEVs as a UPS unit in V2H mode at the time of need. The activation and deactivation of the power unit and islanding protection unit are examined when energy is interrupted.
Uninterrupted optical light curves of main-belt asteroids from the K2 Mission
Szabó, R; Sárneczky, K; Szabó, Gy M; Molnár, L; Kiss, L L; Hanyecz, O; Plachy, E; Kiss, Cs
2016-01-01
Due to the failure of the second reaction wheel, a new mission was conceived for the otherwise healthy Kepler space telescope. In the course of the K2 Mission, the telescope is staring at the plane of the Ecliptic, hence thousands of Solar System bodies cross the K2 fields, usually causing extra noise in the highly accurate photometric data. In this paper we follow the someone's noise is another one's signal principle and investigate the possibility of deriving continuous asteroid light curves, that has been unprecedented to date. In general, we are interested in the photometric precision that the K2 Mission can deliver on moving Solar System bodies. In particular, we investigate space photometric optical light curves of main-belt asteroids. We study the K2 superstamps covering the M35 and Neptune/Nereid fields observed in the long cadence (29.4-min sampling) mode. Asteroid light curves are generated by applying elongated apertures. We use the Lomb-Scargle method to find periodicities due to rotation. We deri...
姚斗春
2015-01-01
In order to prevent the losses caused by production equipment downtime,uninterruptible power supply is used in industrial production. During charging,the main issue is super capacitor charging control technology. In order to solve the problem that the equivalent resistance of super capacity of uninterruptible power supply affects the charging efficiency ,buck charging circuit is designed in this paper. The relationship between input and output voltages under different circumstances is derived. The circuit and charging model is established. Finally the quantitative comparison control mode was verified. The simulation based on the model is established in Proteus and the charging current curve is observed through analogue chart , which verified the advantages of quantitative comparison control mode in the charging speed and efficiency .%为解决不间断电源超级电容等效内阻随SOC变化而影响充电效率的问题，文中采用BUCK型充电电路，针对该电路推导出不同情况下输入输出电压关系，在此基础上建立充电电路模型和充电数学模型。提出定值比较控制模式，根据建立的模型，在Proteus中建立仿真模型，通过ANALOGUE图表观察充电电流曲线，验证了定量比较控制模式的在充电速度以及效率上的明显优势。
Cheeseman, Peter; Stutz, John
2005-01-01
A long standing mystery in using Maximum Entropy (MaxEnt) is how to deal with constraints whose values are uncertain. This situation arises when constraint values are estimated from data, because of finite sample sizes. One approach to this problem, advocated by E.T. Jaynes [1], is to ignore this uncertainty, and treat the empirically observed values as exact. We refer to this as the classic MaxEnt approach. Classic MaxEnt gives point probabilities (subject to the given constraints), rather than probability densities. We develop an alternative approach that assumes that the uncertain constraint values are represented by a probability density {e.g: a Gaussian), and this uncertainty yields a MaxEnt posterior probability density. That is, the classic MaxEnt point probabilities are regarded as a multidimensional function of the given constraint values, and uncertainty on these values is transmitted through the MaxEnt function to give uncertainty over the MaXEnt probabilities. We illustrate this approach by explicitly calculating the generalized MaxEnt density for a simple but common case, then show how this can be extended numerically to the general case. This paper expands the generalized MaxEnt concept introduced in a previous paper [3].
Uninterrupted Sustained Silent Reading.
Meyers, Rick
A study investigated the effect Sustained Silent Reading (SSR) has had on literacy at Estancia High School in California which recently implemented an SSR program. It also examined the role SSR has on language development, comprehension, vocabulary, student attitudes, and its corollary consequence on the development of reading habits. A survey of…
Maximum Autocorrelation Factorial Kriging
Nielsen, Allan Aasbjerg; Conradsen, Knut; Pedersen, John L.; Steenfelt, Agnete
2000-01-01
This paper describes maximum autocorrelation factor (MAF) analysis, maximum autocorrelation factorial kriging, and its application to irregularly sampled stream sediment geochemical data from South Greenland. Kriged MAF images are compared with kriged images of varimax rotated factors from an ordinary non-spatial factor analysis, and they are interpreted in a geological context. It is demonstrated that MAF analysis contrary to ordinary non-spatial factor analysis gives an objective discrimina...
The maximum rotation of a galactic disc
Bottema, R
1997-01-01
The observed stellar velocity dispersions of galactic discs show that the maximum rotation of a disc is on average 63% of the observed maximum rotation. This criterion can, however, not be applied to small or low surface brightness (LSB) galaxies because such systems show, in general, a continuously
Maximum likely scale estimation
Loog, Marco; Pedersen, Kim Steenstrup; Markussen, Bo
2005-01-01
A maximum likelihood local scale estimation principle is presented. An actual implementation of the estimation principle uses second order moments of multiple measurements at a fixed location in the image. These measurements consist of Gaussian derivatives possibly taken at several scales and/or ...
Rozanov, E. V.; Schlesinger, M. E.; Egorova, T. A.; Li, B.; Andronova, N.; Zubov, V. A.
2004-01-01
The University of Illinois at Urbana-Champaign general circulation model with interactive photochemistry has been applied to estimate the changes in ozone, temperature and dynamics caused by the observed enhancement of the solar ultraviolet radiation during the 11-year solar activity cycle. Two 15-yearlong runs with spectral solar UV fluxes for the minimum and maximum solar activity cases have been performed. It was obtained that due to the imposed changes in spectral solar UV fluxes the annual-mean ozone mixing ratio increases 3% over the southern middle latitudes in the upper stratosphere and 2% in the northern lower stratosphere. The model also shows a statistically significant warming of 1.2 K in the stratosphere and an acceleration of the polar-night jets in both hemispheres. The most pronounced changes were found in November and March over the Northern Hemisphere and in September-October over the Southern Hemisphere. The magnitude and seasonal behavior of the simulated changes resemble the most robust features of the solar signal obtained from observational data analysis; however, they do not exactly coincide. The simulated zonal wind and temperature response during late fall to early spring contains the observed downward and poleward propagation of the solar signal, however its structure and phase are different from those observed. The response of the surface air temperature in December consists of warming over northern Europe, USA, and eastern Russia, and cooling over Greenland, Alaska, and central Asia. This pattern resembles the changes of the surface winter temperature after a major volcanic eruption. Model results for September-October show an intensification of ozone loss by up to 10% and expansion of the "ozone hole" toward South America.
Patell, Hilla
2016-01-01
In order to achieve the goal of observation, preparation of the adult, the observer, is necessary. This preparation, says Hilla Patell, requires us to "have an appreciation of the significance of the child's spontaneous activities and a more thorough understanding of the child's needs." She discusses the growth of both the desire to…
Kripalani, Lakshmi A.
2016-01-01
The adult who is inexperienced in the art of observation may, even with the best intentions, react to a child's behavior in a way that hinders instead of helping the child's development. Kripalani outlines the need for training and practice in observation in order to "understand the needs of the children and...to understand how to remove…
Shoichi Sasaki
2014-05-01
Full Text Available Aims: To elucidate the efficacy of galantamine on cognition and behavioral and psychological symptoms of dementia (BPSD in outpatients with mild cognitive impairment (MCI and Alzheimer's disease (AD who have switched from donepezil to galantamine. Materials and Methods: We performed an uninterrupted switch from donepezil to galantamine without a washout period or dose titration in 44 ambulatory outpatients with amnestic MCI (n = 12 or mild-to-moderate AD (n = 32. Three months after the switch, the efficacy of galantamine was evaluated with the Mini-Mental State Examination (MMSE, and the Neuropsychiatric Inventory (NPI and NPI Brief Questionnaire Form (NPI-Q, respectively, using the Wilcoxon signed-rank test. Results: NPI scores improved significantly on BPSD, especially on delusions, agitation and aberrant motor activity in AD patients (p = 0.027; improvement was remarkable in patients with moderate AD (MMSE score 10-19; p = 0.007, while insignificant in those with MCI (MMSE score ≥24; p = 0.648. The NPI-Q score also improved significantly regarding both the severity of the disease (p = 0.009 and caregiver distress (p = 0.012 in AD patients. MMSE scores hardly improved in either MCI (p = 0.394 or AD patients (p = 0.265. Conclusions: An uninterrupted switch from donepezil to galantamine could be a useful alternative treatment option for AD patients whose BPSD are unresponsive to donepezil, or whose caregivers are not satisfied with donepezil treatment.
高压电缆线路不间断取能电源的研究%Research on Uninterruption Power Sources of High-voltage Cable Line
殷迪清; 韩跃峻; 胡顺
2011-01-01
To solve the power supply problem of secondary equipment application m distribution network field, this paper designs uninterruption power sources of high voltage line. The main part of power supply obtains the induced current of high voltage cable line through open current coil. Solar power and lithium battery with charge and discharge are taken as auxiliary power supply, which can solve the problem of inadequate power supply under the conditions of line small load current The automatic switching mode is used to ensure uninterruption power supply output and seamless switching.%为解决电网二次设备在现场应用中的供电电源问题,提出了一种高压电缆线路的不间断取能电源设计,电源的主供电部分通过开口取能线圈从一次电缆线路的电流上取能,并辅助有太阳能电池供电和锂电池充放电,以解决电网中负荷电流较小情况下的供电不足问题,通过自动切换方式确保电源的不间断输出和元缝隙切换.
变电站交流不间断电源应用%Application of AC Uninterruptible Power Supply in Substation
李冀望
2009-01-01
@@ 1 UPS(uninterruptible power system)在变电站的应用 UPS(Uninterruptible Power System)是一种含有储能装置,以逆变器和电池系统为主要组成部分的恒压恒频的电源设备.主要用于给单台计算机、计算机网络系统或其它电力电子设备提供不问断的电力供应.当市电输入正常时,UPS将市电稳压后供应给负载使用,此时的UPS就是一台交流市电稳压器,同时它还向机内电池充电;当站用电源中断时,UPS立即将机内电池的电能,通过逆变转换的方法向负载继续供应220V交流电,使负载维持正常工作并保护负载软、硬件不受损坏.
Maximum Likelihood Associative Memories
Gripon, Vincent; Rabbat, Michael
2013-01-01
Associative memories are structures that store data in such a way that it can later be retrieved given only a part of its content -- a sort-of error/erasure-resilience property. They are used in applications ranging from caches and memory management in CPUs to database engines. In this work we study associative memories built on the maximum likelihood principle. We derive minimum residual error rates when the data stored comes from a uniform binary source. Second, we determine the minimum amo...
Maximum likely scale estimation
Loog, Marco; Pedersen, Kim Steenstrup; Markussen, Bo
2005-01-01
A maximum likelihood local scale estimation principle is presented. An actual implementation of the estimation principle uses second order moments of multiple measurements at a fixed location in the image. These measurements consist of Gaussian derivatives possibly taken at several scales and....../or having different derivative orders. Although the principle is applicable to a wide variety of image models, the main focus here is on the Brownian model and its use for scale selection in natural images. Furthermore, in the examples provided, the simplifying assumption is made that the behavior...... of the measurements is completely characterized by all moments up to second order....
The Testability of Maximum Magnitude
Clements, R.; Schorlemmer, D.; Gonzalez, A.; Zoeller, G.; Schneider, M.
2012-12-01
Recent disasters caused by earthquakes of unexpectedly large magnitude (such as Tohoku) illustrate the need for reliable assessments of the seismic hazard. Estimates of the maximum possible magnitude M at a given fault or in a particular zone are essential parameters in probabilistic seismic hazard assessment (PSHA), but their accuracy remains untested. In this study, we discuss the testability of long-term and short-term M estimates and the limitations that arise from testing such rare events. Of considerable importance is whether or not those limitations imply a lack of testability of a useful maximum magnitude estimate, and whether this should have any influence on current PSHA methodology. We use a simple extreme value theory approach to derive a probability distribution for the expected maximum magnitude in a future time interval, and we perform a sensitivity analysis on this distribution to determine if there is a reasonable avenue available for testing M estimates as they are commonly reported today: devoid of an appropriate probability distribution of their own and estimated only for infinite time (or relatively large untestable periods). Our results imply that any attempt at testing such estimates is futile, and that the distribution is highly sensitive to M estimates only under certain optimal conditions that are rarely observed in practice. In the future we suggest that PSHA modelers be brutally honest about the uncertainty of M estimates, or must find a way to decrease its influence on the estimated hazard.
Regularized maximum correntropy machine
Wang, Jim Jing-Yan
2015-02-12
In this paper we investigate the usage of regularized correntropy framework for learning of classifiers from noisy labels. The class label predictors learned by minimizing transitional loss functions are sensitive to the noisy and outlying labels of training samples, because the transitional loss functions are equally applied to all the samples. To solve this problem, we propose to learn the class label predictors by maximizing the correntropy between the predicted labels and the true labels of the training samples, under the regularized Maximum Correntropy Criteria (MCC) framework. Moreover, we regularize the predictor parameter to control the complexity of the predictor. The learning problem is formulated by an objective function considering the parameter regularization and MCC simultaneously. By optimizing the objective function alternately, we develop a novel predictor learning algorithm. The experiments on two challenging pattern classification tasks show that it significantly outperforms the machines with transitional loss functions.
系留气球不间断供电技术研究%Research on uninterrupted power supply technology for tethered balloon
苗颖; 姜鲁华; 徐国宁
2015-01-01
Power supply system is an important part of tethered balloon,its normal operation is the key to ensure tethered balloon safety and reliability. Some special loading needs uninterrupted power supply. When the main power supply is malfunction, the emergency power is switched to supply system in seamless to achieve system and loading normal operation. The switching modes of common main power supply have the disadvantage of slow motion,long time consuming,complex circuit and low reliability. In combination with the features of tethered balloon power supply system,a simple and easy to implement uninterrupted power supply method is presented. By using this method,the balloon borne-electronic equipment can work stably,and the reliability is enhanced greatly. Simulation and related experiments prove that this power supply structure can realize uninterrupted power supply, and has higher reliability.%供电系统是系留气球的重要组成部分,其正常运行是保证系留气球安全可靠的关键,一些特殊载荷需要不间断供电,即当主供电出现问题时,需要无缝切换到备用电源以实现系统和载荷正常运行.常用主备电切换方式动作缓慢,耗时较长,并且电路复杂可靠性低,结合系留气球供电系统的特点,提出一种简单易实现的不间断供电方式,即在电磁继电器基础上,在备用电源支路上再连接一组开关管并配合小容量电容,当系统检测到电压异常后,开关管在几微秒内快速切换到备用电源,电磁继电器在开关管接通一段时间后也会切换到备份电池,此时备份电池通过两条通路供电给母线,不仅球载电子设备可以稳定工作,而且可靠性大大增加.经过仿真和相关实验,证明这种供电结构实现了不间断供电,并且具有较高的可靠性.
Equalized near maximum likelihood detector
2012-01-01
This paper presents new detector that is used to mitigate intersymbol interference introduced by bandlimited channels. This detector is named equalized near maximum likelihood detector which combines nonlinear equalizer and near maximum likelihood detector. Simulation results show that the performance of equalized near maximum likelihood detector is better than the performance of nonlinear equalizer but worse than near maximum likelihood detector.
李建平
2014-01-01
Describe several uninterruptible power supply technologies which including dual power supply ,USB uninterruptible power supply ,TPM series no disturbance stability control device ,and propose the technology of closed‐loop supplying power for anti‐interference electricity .%论述化工企业几种不间断电源技术---双电源供电、 UPS 不间断电源、 TPM 系列无扰动稳定控制装置，并提出闭路回路供电抗晃电的设想。
Functional Maximum Autocorrelation Factors
Larsen, Rasmus; Nielsen, Allan Aasbjerg
2005-01-01
Purpose. We aim at data where samples of an underlying function are observed in a spatial or temporal layout. Examples of underlying functions are reflectance spectra and biological shapes. We apply functional models based on smoothing splines and generalize the functional PCA in\\verb+~+\\$\\backsl......Purpose. We aim at data where samples of an underlying function are observed in a spatial or temporal layout. Examples of underlying functions are reflectance spectra and biological shapes. We apply functional models based on smoothing splines and generalize the functional PCA in...
数据中心UPS不间断电源配置研究%Research on UPS (Uninterruptable Power Supply) Configuration in Data Center
倪昀炜; 黄赟
2014-01-01
通过科学建模,设计数据中心不间断电源系统UPS(Uninterruptible Power System)配置软件,从冗余、容量、效率、成本、装机面积等参数入手,结合实际运行数据库,为数据中心UPS不间断电源系统设计人员提供一个有效的参考选择.从总体拥有成本TCO(Total Cost of Ownership)全生命周期角度,不仅考虑前期投资,而且对后期维护成本、节能运行进行综合的考虑.
可共用电池不间断电源的研究%Study on an Uninterrupted Power Supply applied with Common Batteries
袁义生
2007-01-01
针对采用同一组电池同时给多台不间断电源(Uninterrupted Power Supply,简称UPS)供电的应用,提出了一种没有环流的UPS电池模式拓扑;分析了该拓扑的两种工作模式,即Buck工作模式和Buck-Boost工作模式,指出它们互相独立,没有环流回路.此外,根据该拓扑的特点,提出了分时控制和同时控制两种控制方法;比较了它们的优缺点.最后研制了两台6 kVA的样机.实验结果证明了该拓扑及其控制方法的有效性.
The Sherpa Maximum Likelihood Estimator
Nguyen, D.; Doe, S.; Evans, I.; Hain, R.; Primini, F.
2011-07-01
A primary goal for the second release of the Chandra Source Catalog (CSC) is to include X-ray sources with as few as 5 photon counts detected in stacked observations of the same field, while maintaining acceptable detection efficiency and false source rates. Aggressive source detection methods will result in detection of many false positive source candidates. Candidate detections will then be sent to a new tool, the Maximum Likelihood Estimator (MLE), to evaluate the likelihood that a detection is a real source. MLE uses the Sherpa modeling and fitting engine to fit a model of a background and source to multiple overlapping candidate source regions. A background model is calculated by simultaneously fitting the observed photon flux in multiple background regions. This model is used to determine the quality of the fit statistic for a background-only hypothesis in the potential source region. The statistic for a background-plus-source hypothesis is calculated by adding a Gaussian source model convolved with the appropriate Chandra point spread function (PSF) and simultaneously fitting the observed photon flux in each observation in the stack. Since a candidate source may be located anywhere in the field of view of each stacked observation, a different PSF must be used for each observation because of the strong spatial dependence of the Chandra PSF. The likelihood of a valid source being detected is a function of the two statistics (for background alone, and for background-plus-source). The MLE tool is an extensible Python module with potential for use by the general Chandra user.
The maximum rotation of a galactic disc
Bottema, R
1997-01-01
The observed stellar velocity dispersions of galactic discs show that the maximum rotation of a disc is on average 63% of the observed maximum rotation. This criterion can, however, not be applied to small or low surface brightness (LSB) galaxies because such systems show, in general, a continuously rising rotation curve until the outermost measured radial position. That is why a general relation has been derived, giving the maximum rotation for a disc depending on the luminosity, surface brightness, and colour of the disc. As a physical basis of this relation serves an adopted fixed mass-to-light ratio as a function of colour. That functionality is consistent with results from population synthesis models and its absolute value is determined from the observed stellar velocity dispersions. The derived maximum disc rotation is compared with a number of observed maximum rotations, clearly demonstrating the need for appreciable amounts of dark matter in the disc region and even more so for LSB galaxies. Matters h...
Design and Implementation of an Uninterruptible Power Supply Based on ARM%基于ARM的井下不间断电源的设计与实现
史延东; 薛鹏; 宁飞
2013-01-01
Design and implementation of uninterruptible power supply based on ARM microprocessor STM32F100 is presented. A flyback power supply and automatic switching circuit are designed. A chip power management system as the core CN3705 chip and FS361A of chip are developed. Using a variety of protective measure, the software flow chart of the system is given. Experi-mental tests showed that the system is stable. It can automatically switch when the power is cutting.%提出了以STM32F100为微处理器的井下矿用不间断电源的设计方案,设计了单端反激式供电电源和自动切换电路,制定了以CN3705芯片和FS361A芯片为核心的电源管理系统,采用了多种保护措施,给出了系统程序软件流程图.实验测试表明,系统工作稳定,在掉电时,可以实现自动切换.
Alternating Current Uninterrupted Power Supply System with High Reliability%高可靠性交流不间断供电系统
匡莉娟; 施洪昌
2008-01-01
为提高供电系统的工作可靠性,介绍了一种具有高可靠性的交流不问断供电系统的设计方法.该系统是由UPS (uninterrupted power supply)并联模块、电子切换开关、电子稳压器等组成.UPS的并联运行是提高电源系统运行可靠性和扩大供电容量的重要手段.由交流稳压器作为UPS的后备电源,提高了系统的可靠性.电子开关保证系统的在线零切换,真正做到对负载供电的不间断.组成系统的模块都可以进行在线维修和更换,可以提高系统的MTBF (mean time between failures),进一步提高系统的可靠性.
Study on Technology of Communication Uninterruptible Power Supply (UPS)%通信用不间断电源(UPS)技术研究
靳丽君
2011-01-01
随着通信技术发展,对电源提出了越来越高的要求,本文介绍了通信电源的三级划分方法以及不间断电源(UPS)的重要性,通过分析各种类型UPS的性能特点,提出了在设计通信用UPS时的前级供电系统、UPS容量计算以及冗余配置的基本思路和方法.%With the development of communication technology, the demands for power are raising.The paper introduces the three-tiered method of communication power and the importance of the uninterruptible power supply (UPS).At last, by analyzing the performance characteristics of various types of UPS, the paper proposed the basic designing ideas and methods of fore power supply system, UPS capacity computing and redundant configuration when designing the communication UPS.
NONE
2005-07-01
This comprehensive report for the Swiss Federal Office of Energy (SFOE) summarises the findings of several working groups in earlier projects dating from 1998 to 2004 concerning the quality and energy-efficiency of uninterruptible power supply (UPS) systems. Existing knowledge in this area is to form a contribution to the European Union's (EU) Code of Conduct for UPS Systems and to provide the basis of a Label for UPS Systems. This report Reviews the basic documentation available, discusses the optimal use of UPS systems and presents a measurement process to be used in the evaluation of systems. Further, a quality-label is proposed and a check-list for the preparation of calls-for-tender is presented. A proposal for the Code of Conduct is presented with general rules, target values and timescales, information for planners and users as well as energy-management guidelines. Several appendices provide details of various aspects of the Code of Conduct, testing procedures, labelling and tendering aspects and the optimal use of UPS systems.
Maximum magnitude earthquakes induced by fluid injection
McGarr, Arthur F.
2014-01-01
Analysis of numerous case histories of earthquake sequences induced by fluid injection at depth reveals that the maximum magnitude appears to be limited according to the total volume of fluid injected. Similarly, the maximum seismic moment seems to have an upper bound proportional to the total volume of injected fluid. Activities involving fluid injection include (1) hydraulic fracturing of shale formations or coal seams to extract gas and oil, (2) disposal of wastewater from these gas and oil activities by injection into deep aquifers, and (3) the development of enhanced geothermal systems by injecting water into hot, low-permeability rock. Of these three operations, wastewater disposal is observed to be associated with the largest earthquakes, with maximum magnitudes sometimes exceeding 5. To estimate the maximum earthquake that could be induced by a given fluid injection project, the rock mass is assumed to be fully saturated, brittle, to respond to injection with a sequence of earthquakes localized to the region weakened by the pore pressure increase of the injection operation and to have a Gutenberg-Richter magnitude distribution with a b value of 1. If these assumptions correctly describe the circumstances of the largest earthquake, then the maximum seismic moment is limited to the volume of injected liquid times the modulus of rigidity. Observations from the available case histories of earthquakes induced by fluid injection are consistent with this bound on seismic moment. In view of the uncertainties in this analysis, however, this should not be regarded as an absolute physical limit.
Maximum magnitude earthquakes induced by fluid injection
McGarr, A.
2014-02-01
Analysis of numerous case histories of earthquake sequences induced by fluid injection at depth reveals that the maximum magnitude appears to be limited according to the total volume of fluid injected. Similarly, the maximum seismic moment seems to have an upper bound proportional to the total volume of injected fluid. Activities involving fluid injection include (1) hydraulic fracturing of shale formations or coal seams to extract gas and oil, (2) disposal of wastewater from these gas and oil activities by injection into deep aquifers, and (3) the development of enhanced geothermal systems by injecting water into hot, low-permeability rock. Of these three operations, wastewater disposal is observed to be associated with the largest earthquakes, with maximum magnitudes sometimes exceeding 5. To estimate the maximum earthquake that could be induced by a given fluid injection project, the rock mass is assumed to be fully saturated, brittle, to respond to injection with a sequence of earthquakes localized to the region weakened by the pore pressure increase of the injection operation and to have a Gutenberg-Richter magnitude distribution with a b value of 1. If these assumptions correctly describe the circumstances of the largest earthquake, then the maximum seismic moment is limited to the volume of injected liquid times the modulus of rigidity. Observations from the available case histories of earthquakes induced by fluid injection are consistent with this bound on seismic moment. In view of the uncertainties in this analysis, however, this should not be regarded as an absolute physical limit.
齐国庆; 肖立慧
2016-01-01
UPS不间断电源是保证安全播出的关键设备，从本单位实际出发，针对存在的问题制定详细的技术方案，体现出3个方面的创新点，通过实践运用，解决了原系统的弊端，真正实现了不间断安全播出。%USP uninterrupted power supply is the key equipment to ensure safe broadcast .From the actual sit-uation of the unit , to develop a detailed technical solutions for existing problems ,reflecting the 3 aspects of in-novation .Through practical application , to solve the drawbacks of the original system and ensure uninterrupted broadcasting truly .
罗永东
2015-01-01
主要针对如何保障直播演播室不间断电源系统的正常使用展开了探讨，对不间断电源系统的养护作了详细的阐述，并给出了一系列相应有效的措施，以期能为有关方面提供有益的参考和借鉴。%How to protect against the normal use of a live studio uninterruptible power system started to explore, conservation of uninterruptible power supply system’s made in detail, and gives the corresponding series of effective measures, in order to be able to provide interested parties a useful reference and reference.
Maximum floodflows in the conterminous United States
Crippen, John R.; Bue, Conrad D.
1977-01-01
Peak floodflows from thousands of observation sites within the conterminous United States were studied to provide a guide for estimating potential maximum floodflows. Data were selected from 883 sites with drainage areas of less than 10,000 square miles (25,900 square kilometers) and were grouped into regional sets. Outstanding floods for each region were plotted on graphs, and envelope curves were computed that offer reasonable limits for estimates of maximum floods. The curves indicate that floods may occur that are two to three times greater than those known for most streams.
Maximum phytoplankton concentrations in the sea
Jackson, G.A.; Kiørboe, Thomas
2008-01-01
A simplification of plankton dynamics using coagulation theory provides predictions of the maximum algal concentration sustainable in aquatic systems. These predictions have previously been tested successfully against results from iron fertilization experiments. We extend the test to data collected...... in the North Atlantic as part of the Bermuda Atlantic Time Series program as well as data collected off Southern California as part of the Southern California Bight Study program. The observed maximum particulate organic carbon and volumetric particle concentrations are consistent with the predictions...
OECD Maximum Residue Limit Calculator
With the goal of harmonizing the calculation of maximum residue limits (MRLs) across the Organisation for Economic Cooperation and Development, the OECD has developed an MRL Calculator. View the calculator.
基于LM2596的不间断直流电源设计%Design of uninterruptible DC power supply based on LM2596
潘传勇; 丁国臣; 陈世夏
2013-01-01
An uninterruptible DC power supply is designed,which uses the switching voltage regulator LM2596 to conduct DC-DC transformation,and outputs the drive current of 3 A. The power supply has very good load regulation characteristics. When the primary power supply is switched off,the battery is pitched in through the relay automatically to power the device. When the primary power supply is normal,the battery is charged in different modes:when the voltage is greater than the set value, it is charged in constant voltage;when the voltage is lower than the set value,it is charged in constant current. The overcurrent protection and under-voltage protection to the circuit are realized by the relay of the system. The system’s structure is simple, its overall performance is stable,and its cost-performance is high.%设计的不间断直流工作电源，采用开关电压调节器LM2596进行DC-DC变换，能够输出3 A的驱动电流，同时具有很好的负载调节特性。在主电源断电时，电路通过继电器自动将蓄电池切入，给设备供电。在主电源正常时，以不同模式给蓄电池充电：当电压大于设定值时，恒压充电；当电压低于设定值时，恒流充电。系统可以通过继电器对电路进行过流保护与欠压保护。系统结构简单，整体性能稳定，性价比较高。
Distributed Uninterrupted DC Operating Power Supply for Smart Grid%智能电网分布式不间断直流操作电源
陈哲军; 毛行奎
2015-01-01
As an important complement to centralized power supply,distributed uninterrupted DC power system is one of the trends of operating power system,which improves power supply stability,while meeting the needs of small user terminals.According to the electricity grid load characteristic requirement,this paper proposed a system solution which can load instantaneous power,described the design process of each module and gave the design results.The working mode and system bus voltage were designed reasonably to ensure power supply stability and reduce power converter design margins,reduce costs,which has practical value.%分布式不间断直流操作电源作为电网集中式供电电源的重要补充，不仅能提高供电稳定性，而且能满足小型用户终端需求。根据电网用电负载特性要求，提出一种能够承受瞬时功率的分布式不间断直流操作电源系统方案。对系统进行分模块介绍，并给出了设计结果。通过合理设计母线电压及工作模式，确保供电稳定性，降低高频功率变换器设计裕量，有效降低成本，具有工程实用价值。
Maximum Multiflow in Wireless Network Coding
Zhou, Jin-Yi; Jiang, Yong; Zheng, Hai-Tao
2012-01-01
In a multihop wireless network, wireless interference is crucial to the maximum multiflow (MMF) problem, which studies the maximum throughput between multiple pairs of sources and sinks. In this paper, we observe that network coding could help to decrease the impacts of wireless interference, and propose a framework to study the MMF problem for multihop wireless networks with network coding. Firstly, a network model is set up to describe the new conflict relations modified by network coding. Then, we formulate a linear programming problem to compute the maximum throughput and show its superiority over one in networks without coding. Finally, the MMF problem in wireless network coding is shown to be NP-hard and a polynomial approximation algorithm is proposed.
耿新军
2015-01-01
针对动力空压站UPS系统设备超期服役、元器件老化、安装地点不适宜、系统电源配置不合理等现状，重点从设备选型、变更安装地点、优化系统配置方面进行升级改造。项目实施后，实现了高效、稳定运行。%Aimed at current situations of overtime service, aging of components and parts, unsuitable installation site and unreasonable electrical source formulation existing in uninterrupt-ed power supply ( UPS) system of the air pressure power station, revamps involving equipment selection, alteration of the installation site and optimization on system formulation were mainly executed.High efficiency and stable running of the uninterrupted power supply system was real-ized after the upgrade revamp.
The Redundant Tree Algorithm for Uninterrupted Data Delivery%可保障数据无中断传输的冗余树算法研究
夏怒; 李伟; 陆悠; 蒋健; 单冯; 罗军舟
2016-01-01
随着大数据应用的发展，保障数据无中断传输的需求日益增强。针对单点或单链路失效的情况，现有的保障数据无中断传输方法存在主/备份路径的数据传输性能较低、抵御多节点/边失效能力不强等问题。为解决以上问题，提出一种可保障数据无中断传输的按边序选环的冗余树算法 CSES （circle selecting by edge sorting based redundant tree algorithm for uninterrupted data delivery），可用于构建数据传输性能优化的主/备份路径，并使数据传输具有较强的抵御多节点/边失效的能力。该算法首先根据网络拓扑构建以数据源为根节点的最小传输树，以最小化主传输路径上的转发跳数；其次，为了减少备份路径的转发跳数并提高数据传输抵御多节点/边失效的能力，对拓扑中不在最小传输树上的边进行排序，将树上根节点到边上2个端点的路径上节点数量之和较小的边排在前列。随后按序将边添加到最小传输树上以构建冗余环，并基于冗余环生成冗余枝添加到最小传输树上，最终形成以数据源为根节点的冗余树。实验结果表明，相比于其他冗余树算法，基于 CSES 算法构建的冗余树所生成的主/备份路径的转发跳数更少且抵御多节点/边失效的能力更强。%With the development of the big data applications ,the requirement for guaranteeing un‐interrupted data delivery is growing gradually . To address the problem of single node/link failure , researchers had conducted lots of work .However ,current methods for guaranteeing uninterrupted data delivery face the deficiencies of low performance of the primary/secondary delivery paths and the low resistant ability to the multiple nodes/links failure .In order to solve the above problems ,a circle selecting by edge sorting based redundant tree algorithm for uninterrupted data delivery CSES is presented .At first ,a minimal delivery
All Children Deserve Uninterrupted Learning!
Brown, Fred
2015-01-01
Teachers often start a new school year working extremely hard to reteach last year's content, particularly for their lower income students. According to "Making Summer Count," a report commissioned by The Wallace Foundation and written by researchers at Rand, rigorous studies of voluntary summer programs, mandatory summer programs, and…
Fabbri, Giacomo; Zarone, Fernando; Dellificorelli, Gianluca; Cannistraro, Giorgio; De Lorenzi, Marco; Mosca, Alberto; Sorrentino, Roberto
2014-01-01
This study aimed to assess the clinical performance of lithium disilicate restorations supported by natural teeth or implants. Eight hundred sixty lithium disilicate adhesive restorations, including crowns on natural teeth and implant abutments, veneers, and onlays, were made in 312 patients. Parafunctional patients were included, but subjects with uncontrolled periodontitis and gingival inflammation were excluded. Veneers up to 0.5 mm thick were luted with flowable composite resin or light curing cements, while dual-curing composite systems were used with veneers up to 0.8 mm thick. Onlays up to 2 mm in thickness were luted with flowable composite resins or dual-curing composite cements. Crowns up to 1 mm in thickness were cemented with self-adhesive or dual-curing resin cements. The observational period ranged from 12 to 72 months, with a mean follow-up of 3 years. The mechanical and esthetic outcomes of the restorations were evaluated according to the modified California Dental Association (CDA) criteria. Data were analyzed with descriptive statistics. Twenty-six mechanical complications were observed: 17 porcelain chippings, 5 fractures, and 4 losses of retention. Structural drawbacks occurred mainly in posterior segments, and monolithic restorations showed the lowest number of mechanical complications. The clinical ratings of the successful restorations, both monolithic and layered, were satisfactory according to the modified CDA criteria for color match, porcelain surface, and marginal integrity. The cumulative survival rates of lithium disilicate restorations ranged from 95.46% to 100%, while cumulative success rates ranged from 95.39% to 100%. All restorations recorded very high survival and success rates. The use of lithium disilicate restorations in fixed prosthodontics proved to be effective and reliable in the short- and medium-term.
García, Marga; Dowdeswell, J. A.; Noormets, R.; Hogan, K. A.; Evans, J.; Ó Cofaigh, C.; Larter, R. D.
2016-12-01
Detailed bathymetric and sub-bottom acoustic observations in Bourgeois Fjord (Marguerite Bay, Antarctic Peninsula) provide evidence on sedimentary processes and glacier dynamics during the last glacial cycle. Submarine landforms observed in the 50 km-long fjord, from the margins of modern tidewater glaciers to the now ice-distal Marguerite Bay, are described and interpreted. The landforms are grouped into four morpho-sedimentary systems: (i) glacial advance and full-glacial; (ii) subglacial and ice-marginal meltwater; (iii) glacial retreat and neoglaciation; and (iv) Holocene mass-wasting. These morpho-sedimentary systems have been integrated with morphological studies of the Marguerite Bay continental shelf and analysed in terms of the specific sedimentary processes and/or stages of the glacial cycle. They demonstrate the action of an ice-sheet outlet glacier that produced drumlins and crag-and-tail features in the main and outer fjord. Meltwater processes eroded bedrock channels and ponds infilled by fine-grained sediments. Following the last deglaciation of the fjord at about 9000 yr BP, subsequent Holocene neoglacial activity involved minor readvances of a tidewater glacier terminus in Blind Bay. Recent stillstands and/or minor readvances are inferred from the presence of a major transverse moraine that indicates grounded ice stabilization, probably during the Little Ice Age, and a series of smaller landforms that reveal intermittent minor readvances. Mass-wasting processes also affected the walls of the fjord and produced scars and fan-shaped deposits during the Holocene. Glacier-terminus changes during the last six decades, derived from satellite images and aerial photographs, reveal variable behaviour of adjacent tidewater glaciers. The smaller glaciers show the most marked recent retreat, influenced by regional physiography and catchment-area size.
Maximum margin Bayesian network classifiers.
Pernkopf, Franz; Wohlmayr, Michael; Tschiatschek, Sebastian
2012-03-01
We present a maximum margin parameter learning algorithm for Bayesian network classifiers using a conjugate gradient (CG) method for optimization. In contrast to previous approaches, we maintain the normalization constraints on the parameters of the Bayesian network during optimization, i.e., the probabilistic interpretation of the model is not lost. This enables us to handle missing features in discriminatively optimized Bayesian networks. In experiments, we compare the classification performance of maximum margin parameter learning to conditional likelihood and maximum likelihood learning approaches. Discriminative parameter learning significantly outperforms generative maximum likelihood estimation for naive Bayes and tree augmented naive Bayes structures on all considered data sets. Furthermore, maximizing the margin dominates the conditional likelihood approach in terms of classification performance in most cases. We provide results for a recently proposed maximum margin optimization approach based on convex relaxation. While the classification results are highly similar, our CG-based optimization is computationally up to orders of magnitude faster. Margin-optimized Bayesian network classifiers achieve classification performance comparable to support vector machines (SVMs) using fewer parameters. Moreover, we show that unanticipated missing feature values during classification can be easily processed by discriminatively optimized Bayesian network classifiers, a case where discriminative classifiers usually require mechanisms to complete unknown feature values in the data first.
Maximum Entropy in Drug Discovery
Chih-Yuan Tseng
2014-07-01
Full Text Available Drug discovery applies multidisciplinary approaches either experimentally, computationally or both ways to identify lead compounds to treat various diseases. While conventional approaches have yielded many US Food and Drug Administration (FDA-approved drugs, researchers continue investigating and designing better approaches to increase the success rate in the discovery process. In this article, we provide an overview of the current strategies and point out where and how the method of maximum entropy has been introduced in this area. The maximum entropy principle has its root in thermodynamics, yet since Jaynes’ pioneering work in the 1950s, the maximum entropy principle has not only been used as a physics law, but also as a reasoning tool that allows us to process information in hand with the least bias. Its applicability in various disciplines has been abundantly demonstrated. We give several examples of applications of maximum entropy in different stages of drug discovery. Finally, we discuss a promising new direction in drug discovery that is likely to hinge on the ways of utilizing maximum entropy.
Tissue radiation response with maximum Tsallis entropy.
Sotolongo-Grau, O; Rodríguez-Pérez, D; Antoranz, J C; Sotolongo-Costa, Oscar
2010-10-08
The expression of survival factors for radiation damaged cells is currently based on probabilistic assumptions and experimentally fitted for each tumor, radiation, and conditions. Here, we show how the simplest of these radiobiological models can be derived from the maximum entropy principle of the classical Boltzmann-Gibbs expression. We extend this derivation using the Tsallis entropy and a cutoff hypothesis, motivated by clinical observations. The obtained expression shows a remarkable agreement with the experimental data found in the literature.
Greenslade, Thomas B., Jr.
1985-01-01
Discusses a series of experiments performed by Thomas Hope in 1805 which show the temperature at which water has its maximum density. Early data cast into a modern form as well as guidelines and recent data collected from the author provide background for duplicating Hope's experiments in the classroom. (JN)
Abolishing the maximum tension principle
Dabrowski, Mariusz P
2015-01-01
We find the series of example theories for which the relativistic limit of maximum tension $F_{max} = c^2/4G$ represented by the entropic force can be abolished. Among them the varying constants theories, some generalized entropy models applied both for cosmological and black hole horizons as well as some generalized uncertainty principle models.
Abolishing the maximum tension principle
Mariusz P. Da̧browski
2015-09-01
Full Text Available We find the series of example theories for which the relativistic limit of maximum tension Fmax=c4/4G represented by the entropic force can be abolished. Among them the varying constants theories, some generalized entropy models applied both for cosmological and black hole horizons as well as some generalized uncertainty principle models.
Weak Scale From the Maximum Entropy Principle
Hamada, Yuta; Kawana, Kiyoharu
2015-01-01
The theory of multiverse and wormholes suggests that the parameters of the Standard Model are fixed in such a way that the radiation of the $S^{3}$ universe at the final stage $S_{rad}$ becomes maximum, which we call the maximum entropy principle. Although it is difficult to confirm this principle generally, for a few parameters of the Standard Model, we can check whether $S_{rad}$ actually becomes maximum at the observed values. In this paper, we regard $S_{rad}$ at the final stage as a function of the weak scale ( the Higgs expectation value ) $v_{h}$, and show that it becomes maximum around $v_{h}={\\cal{O}}(300\\text{GeV})$ when the dimensionless couplings in the Standard Model, that is, the Higgs self coupling, the gauge couplings, and the Yukawa couplings are fixed. Roughly speaking, we find that the weak scale is given by \\begin{equation} v_{h}\\sim\\frac{T_{BBN}^{2}}{M_{pl}y_{e}^{5}},\
Weak scale from the maximum entropy principle
Hamada, Yuta; Kawai, Hikaru; Kawana, Kiyoharu
2015-03-01
The theory of the multiverse and wormholes suggests that the parameters of the Standard Model (SM) are fixed in such a way that the radiation of the S3 universe at the final stage S_rad becomes maximum, which we call the maximum entropy principle. Although it is difficult to confirm this principle generally, for a few parameters of the SM, we can check whether S_rad actually becomes maximum at the observed values. In this paper, we regard S_rad at the final stage as a function of the weak scale (the Higgs expectation value) vh, and show that it becomes maximum around vh = {{O}} (300 GeV) when the dimensionless couplings in the SM, i.e., the Higgs self-coupling, the gauge couplings, and the Yukawa couplings are fixed. Roughly speaking, we find that the weak scale is given by vh ˜ T_{BBN}2 / (M_{pl}ye5), where ye is the Yukawa coupling of electron, T_BBN is the temperature at which the Big Bang nucleosynthesis starts, and M_pl is the Planck mass.
Maximum Genus of Strong Embeddings
Er-ling Wei; Yan-pei Liu; Han Ren
2003-01-01
The strong embedding conjecture states that any 2-connected graph has a strong embedding on some surface. It implies the circuit double cover conjecture: Any 2-connected graph has a circuit double cover.Conversely, it is not true. But for a 3-regular graph, the two conjectures are equivalent. In this paper, a characterization of graphs having a strong embedding with exactly 3 faces, which is the strong embedding of maximum genus, is given. In addition, some graphs with the property are provided. More generally, an upper bound of the maximum genus of strong embeddings of a graph is presented too. Lastly, it is shown that the interpolation theorem is true to planar Halin graph.
Remizov, Ivan D
2009-01-01
In this note, we represent a subdifferential of a maximum functional defined on the space of all real-valued continuous functions on a given metric compact set. For a given argument, $f$ it coincides with the set of all probability measures on the set of points maximizing $f$ on the initial compact set. This complete characterization lies in the heart of several important identities in microeconomics, such as Roy's identity, Sheppard's lemma, as well as duality theory in production and linear programming.
Alternative Multiview Maximum Entropy Discrimination.
Chao, Guoqing; Sun, Shiliang
2016-07-01
Maximum entropy discrimination (MED) is a general framework for discriminative estimation based on maximum entropy and maximum margin principles, and can produce hard-margin support vector machines under some assumptions. Recently, the multiview version of MED multiview MED (MVMED) was proposed. In this paper, we try to explore a more natural MVMED framework by assuming two separate distributions p1( Θ1) over the first-view classifier parameter Θ1 and p2( Θ2) over the second-view classifier parameter Θ2 . We name the new MVMED framework as alternative MVMED (AMVMED), which enforces the posteriors of two view margins to be equal. The proposed AMVMED is more flexible than the existing MVMED, because compared with MVMED, which optimizes one relative entropy, AMVMED assigns one relative entropy term to each of the two views, thus incorporating a tradeoff between the two views. We give the detailed solving procedure, which can be divided into two steps. The first step is solving our optimization problem without considering the equal margin posteriors from two views, and then, in the second step, we consider the equal posteriors. Experimental results on multiple real-world data sets verify the effectiveness of the AMVMED, and comparisons with MVMED are also reported.
Zipf's law, power laws and maximum entropy
Visser, Matt
2013-04-01
Zipf's law, and power laws in general, have attracted and continue to attract considerable attention in a wide variety of disciplines—from astronomy to demographics to software structure to economics to linguistics to zoology, and even warfare. A recent model of random group formation (RGF) attempts a general explanation of such phenomena based on Jaynes' notion of maximum entropy applied to a particular choice of cost function. In the present paper I argue that the specific cost function used in the RGF model is in fact unnecessarily complicated, and that power laws can be obtained in a much simpler way by applying maximum entropy ideas directly to the Shannon entropy subject only to a single constraint: that the average of the logarithm of the observable quantity is specified.
Zipf's law, power laws, and maximum entropy
Visser, Matt
2012-01-01
Zipf's law, and power laws in general, have attracted and continue to attract considerable attention in a wide variety of disciplines - from astronomy to demographics to economics to linguistics to zoology, and even warfare. A recent model of random group formation [RGF] attempts a general explanation of such phenomena based on Jaynes' notion of maximum entropy applied to a particular choice of cost function. In the present article I argue that the cost function used in the RGF model is in fact unnecessarily complicated, and that power laws can be obtained in a much simpler way by applying maximum entropy ideas directly to the Shannon entropy subject only to a single constraint: that the average of the logarithm of the observable quantity is specified.
Cacti with maximum Kirchhoff index
Wang, Wen-Rui; Pan, Xiang-Feng
2015-01-01
The concept of resistance distance was first proposed by Klein and Randi\\'c. The Kirchhoff index $Kf(G)$ of a graph $G$ is the sum of resistance distance between all pairs of vertices in $G$. A connected graph $G$ is called a cactus if each block of $G$ is either an edge or a cycle. Let $Cat(n;t)$ be the set of connected cacti possessing $n$ vertices and $t$ cycles, where $0\\leq t \\leq \\lfloor\\frac{n-1}{2}\\rfloor$. In this paper, the maximum kirchhoff index of cacti are characterized, as well...
Generic maximum likely scale selection
Pedersen, Kim Steenstrup; Loog, Marco; Markussen, Bo
2007-01-01
The fundamental problem of local scale selection is addressed by means of a novel principle, which is based on maximum likelihood estimation. The principle is generally applicable to a broad variety of image models and descriptors, and provides a generic scale estimation methodology. The focus...... on second order moments of multiple measurements outputs at a fixed location. These measurements, which reflect local image structure, consist in the cases considered here of Gaussian derivatives taken at several scales and/or having different derivative orders....
Changes in context and perception of maximum reaching height.
Wagman, Jeffrey B; Day, Brian M
2014-01-01
Successfully performing a given behavior requires flexibility in both perception and behavior. In particular, doing so requires perceiving whether that behavior is possible across the variety of contexts in which it might be performed. Three experiments investigated how (changes in) context (ie point of observation and intended reaching task) influenced perception of maximum reaching height. The results of experiment 1 showed that perceived maximum reaching height more closely reflected actual reaching ability when perceivers occupied a point of observation that was compatible with that required for the reaching task. The results of experiments 2 and 3 showed that practice perceiving maximum reaching height from a given point of observation improved perception of maximum reaching height from a different point of observation, regardless of whether such practice occurred at a compatible or incompatible point of observation. In general, such findings show bounded flexibility in perception of affordances and are thus consistent with a description of perceptual systems as smart perceptual devices.
Economics and Maximum Entropy Production
Lorenz, R. D.
2003-04-01
Price differentials, sales volume and profit can be seen as analogues of temperature difference, heat flow and work or entropy production in the climate system. One aspect in which economic systems exhibit more clarity than the climate is that the empirical and/or statistical mechanical tendency for systems to seek a maximum in production is very evident in economics, in that the profit motive is very clear. Noting the common link between 1/f noise, power laws and Self-Organized Criticality with Maximum Entropy Production, the power law fluctuations in security and commodity prices is not inconsistent with the analogy. There is an additional thermodynamic analogy, in that scarcity is valued. A commodity concentrated among a few traders is valued highly by the many who do not have it. The market therefore encourages via prices the spreading of those goods among a wider group, just as heat tends to diffuse, increasing entropy. I explore some empirical price-volume relationships of metals and meteorites in this context.
MLDS: Maximum Likelihood Difference Scaling in R
Kenneth Knoblauch
2008-01-01
Full Text Available The MLDS package in the R programming language can be used to estimate perceptual scales based on the results of psychophysical experiments using the method of difference scaling. In a difference scaling experiment, observers compare two supra-threshold differences (a,b and (c,d on each trial. The approach is based on a stochastic model of how the observer decides which perceptual difference (or interval (a,b or (c,d is greater, and the parameters of the model are estimated using a maximum likelihood criterion. We also propose a method to test the model by evaluating the self-consistency of the estimated scale. The package includes an example in which an observer judges the differences in correlation between scatterplots. The example may be readily adapted to estimate perceptual scales for arbitrary physical continua.
Maximum entropy analysis of cosmic ray composition
Nosek, Dalibor; Vícha, Jakub; Trávníček, Petr; Nosková, Jana
2016-01-01
We focus on the primary composition of cosmic rays with the highest energies that cause extensive air showers in the Earth's atmosphere. A way of examining the two lowest order moments of the sample distribution of the depth of shower maximum is presented. The aim is to show that useful information about the composition of the primary beam can be inferred with limited knowledge we have about processes underlying these observations. In order to describe how the moments of the depth of shower maximum depend on the type of primary particles and their energies, we utilize a superposition model. Using the principle of maximum entropy, we are able to determine what trends in the primary composition are consistent with the input data, while relying on a limited amount of information from shower physics. Some capabilities and limitations of the proposed method are discussed. In order to achieve a realistic description of the primary mass composition, we pay special attention to the choice of the parameters of the sup...
The sun and heliosphere at solar maximum.
Smith, E J; Marsden, R G; Balogh, A; Gloeckler, G; Geiss, J; McComas, D J; McKibben, R B; MacDowall, R J; Lanzerotti, L J; Krupp, N; Krueger, H; Landgraf, M
2003-11-14
Recent Ulysses observations from the Sun's equator to the poles reveal fundamental properties of the three-dimensional heliosphere at the maximum in solar activity. The heliospheric magnetic field originates from a magnetic dipole oriented nearly perpendicular to, instead of nearly parallel to, the Sun's rotation axis. Magnetic fields, solar wind, and energetic charged particles from low-latitude sources reach all latitudes, including the polar caps. The very fast high-latitude wind and polar coronal holes disappear and reappear together. Solar wind speed continues to be inversely correlated with coronal temperature. The cosmic ray flux is reduced symmetrically at all latitudes.
Conductivity maximum in a charged colloidal suspension
Bastea, S
2009-01-27
Molecular dynamics simulations of a charged colloidal suspension in the salt-free regime show that the system exhibits an electrical conductivity maximum as a function of colloid charge. We attribute this behavior to two main competing effects: colloid effective charge saturation due to counterion 'condensation' and diffusion slowdown due to the relaxation effect. In agreement with previous observations, we also find that the effective transported charge is larger than the one determined by the Stern layer and suggest that it corresponds to the boundary fluid layer at the surface of the colloidal particles.
Objects of maximum electromagnetic chirality
Fernandez-Corbaton, Ivan
2015-01-01
We introduce a definition of the electromagnetic chirality of an object and show that it has an upper bound. The upper bound is attained if and only if the object is transparent for fields of one handedness (helicity). Additionally, electromagnetic duality symmetry, i.e. helicity preservation upon scattering, turns out to be a necessary condition for reciprocal scatterers to attain the upper bound. We use these results to provide requirements for the design of such extremal scatterers. The requirements can be formulated as constraints on the polarizability tensors for dipolar scatterers or as material constitutive relations. We also outline two applications for objects of maximum electromagnetic chirality: A twofold resonantly enhanced and background free circular dichroism measurement setup, and angle independent helicity filtering glasses.
Maximum mutual information regularized classification
Wang, Jim Jing-Yan
2014-09-07
In this paper, a novel pattern classification approach is proposed by regularizing the classifier learning to maximize mutual information between the classification response and the true class label. We argue that, with the learned classifier, the uncertainty of the true class label of a data sample should be reduced by knowing its classification response as much as possible. The reduced uncertainty is measured by the mutual information between the classification response and the true class label. To this end, when learning a linear classifier, we propose to maximize the mutual information between classification responses and true class labels of training samples, besides minimizing the classification error and reducing the classifier complexity. An objective function is constructed by modeling mutual information with entropy estimation, and it is optimized by a gradient descend method in an iterative algorithm. Experiments on two real world pattern classification problems show the significant improvements achieved by maximum mutual information regularization.
The strong maximum principle revisited
Pucci, Patrizia; Serrin, James
In this paper we first present the classical maximum principle due to E. Hopf, together with an extended commentary and discussion of Hopf's paper. We emphasize the comparison technique invented by Hopf to prove this principle, which has since become a main mathematical tool for the study of second order elliptic partial differential equations and has generated an enormous number of important applications. While Hopf's principle is generally understood to apply to linear equations, it is in fact also crucial in nonlinear theories, such as those under consideration here. In particular, we shall treat and discuss recent generalizations of the strong maximum principle, and also the compact support principle, for the case of singular quasilinear elliptic differential inequalities, under generally weak assumptions on the quasilinear operators and the nonlinearities involved. Our principal interest is in necessary and sufficient conditions for the validity of both principles; in exposing and simplifying earlier proofs of corresponding results; and in extending the conclusions to wider classes of singular operators than previously considered. The results have unexpected ramifications for other problems, as will develop from the exposition, e.g. two point boundary value problems for singular quasilinear ordinary differential equations (Sections 3 and 4); the exterior Dirichlet boundary value problem (Section 5); the existence of dead cores and compact support solutions, i.e. dead cores at infinity (Section 7); Euler-Lagrange inequalities on a Riemannian manifold (Section 9); comparison and uniqueness theorems for solutions of singular quasilinear differential inequalities (Section 10). The case of p-regular elliptic inequalities is briefly considered in Section 11.
Maximum entropy production in daisyworld
Maunu, Haley A.; Knuth, Kevin H.
2012-05-01
Daisyworld was first introduced in 1983 by Watson and Lovelock as a model that illustrates how life can influence a planet's climate. These models typically involve modeling a planetary surface on which black and white daisies can grow thus influencing the local surface albedo and therefore also the temperature distribution. Since then, variations of daisyworld have been applied to study problems ranging from ecological systems to global climate. Much of the interest in daisyworld models is due to the fact that they enable one to study self-regulating systems. These models are nonlinear, and as such they exhibit sensitive dependence on initial conditions, and depending on the specifics of the model they can also exhibit feedback loops, oscillations, and chaotic behavior. Many daisyworld models are thermodynamic in nature in that they rely on heat flux and temperature gradients. However, what is not well-known is whether, or even why, a daisyworld model might settle into a maximum entropy production (MEP) state. With the aim to better understand these systems, this paper will discuss what is known about the role of MEP in daisyworld models.
Maximum stellar iron core mass
F W Giacobbe
2003-03-01
An analytical method of estimating the mass of a stellar iron core, just prior to core collapse, is described in this paper. The method employed depends, in part, upon an estimate of the true relativistic mass increase experienced by electrons within a highly compressed iron core, just prior to core collapse, and is signiﬁcantly different from a more typical Chandrasekhar mass limit approach. This technique produced a maximum stellar iron core mass value of 2.69 × 1030 kg (1.35 solar masses). This mass value is very near to the typical mass values found for neutron stars in a recent survey of actual neutron star masses. Although slightly lower and higher neutron star masses may also be found, lower mass neutron stars are believed to be formed as a result of enhanced iron core compression due to the weight of non-ferrous matter overlying the iron cores within large stars. And, higher mass neutron stars are likely to be formed as a result of fallback or accretion of additional matter after an initial collapse event involving an iron core having a mass no greater than 2.69 × 1030 kg.
Maximum Matchings via Glauber Dynamics
Jindal, Anant; Pal, Manjish
2011-01-01
In this paper we study the classic problem of computing a maximum cardinality matching in general graphs $G = (V, E)$. The best known algorithm for this problem till date runs in $O(m \\sqrt{n})$ time due to Micali and Vazirani \\cite{MV80}. Even for general bipartite graphs this is the best known running time (the algorithm of Karp and Hopcroft \\cite{HK73} also achieves this bound). For regular bipartite graphs one can achieve an $O(m)$ time algorithm which, following a series of papers, has been recently improved to $O(n \\log n)$ by Goel, Kapralov and Khanna (STOC 2010) \\cite{GKK10}. In this paper we present a randomized algorithm based on the Markov Chain Monte Carlo paradigm which runs in $O(m \\log^2 n)$ time, thereby obtaining a significant improvement over \\cite{MV80}. We use a Markov chain similar to the \\emph{hard-core model} for Glauber Dynamics with \\emph{fugacity} parameter $\\lambda$, which is used to sample independent sets in a graph from the Gibbs Distribution \\cite{V99}, to design a faster algori...
2011-01-10
...: Establishing Maximum Allowable Operating Pressure or Maximum Operating Pressure Using Record Evidence, and... facilities of their responsibilities, under Federal integrity management (IM) regulations, to perform... system, especially when calculating Maximum Allowable Operating Pressure (MAOP) or Maximum Operating...
Vestige: Maximum likelihood phylogenetic footprinting
Maxwell Peter
2005-05-01
Full Text Available Abstract Background Phylogenetic footprinting is the identification of functional regions of DNA by their evolutionary conservation. This is achieved by comparing orthologous regions from multiple species and identifying the DNA regions that have diverged less than neutral DNA. Vestige is a phylogenetic footprinting package built on the PyEvolve toolkit that uses probabilistic molecular evolutionary modelling to represent aspects of sequence evolution, including the conventional divergence measure employed by other footprinting approaches. In addition to measuring the divergence, Vestige allows the expansion of the definition of a phylogenetic footprint to include variation in the distribution of any molecular evolutionary processes. This is achieved by displaying the distribution of model parameters that represent partitions of molecular evolutionary substitutions. Examination of the spatial incidence of these effects across regions of the genome can identify DNA segments that differ in the nature of the evolutionary process. Results Vestige was applied to a reference dataset of the SCL locus from four species and provided clear identification of the known conserved regions in this dataset. To demonstrate the flexibility to use diverse models of molecular evolution and dissect the nature of the evolutionary process Vestige was used to footprint the Ka/Ks ratio in primate BRCA1 with a codon model of evolution. Two regions of putative adaptive evolution were identified illustrating the ability of Vestige to represent the spatial distribution of distinct molecular evolutionary processes. Conclusion Vestige provides a flexible, open platform for phylogenetic footprinting. Underpinned by the PyEvolve toolkit, Vestige provides a framework for visualising the signatures of evolutionary processes across the genome of numerous organisms simultaneously. By exploiting the maximum-likelihood statistical framework, the complex interplay between mutational
Maximum Likelihood Analysis in the PEN Experiment
Lehman, Martin
2013-10-01
The experimental determination of the π+ -->e+ ν (γ) decay branching ratio currently provides the most accurate test of lepton universality. The PEN experiment at PSI, Switzerland, aims to improve the present world average experimental precision of 3 . 3 ×10-3 to 5 ×10-4 using a stopped beam approach. During runs in 2008-10, PEN has acquired over 2 ×107 πe 2 events. The experiment includes active beam detectors (degrader, mini TPC, target), central MWPC tracking with plastic scintillator hodoscopes, and a spherical pure CsI electromagnetic shower calorimeter. The final branching ratio will be calculated using a maximum likelihood analysis. This analysis assigns each event a probability for 5 processes (π+ -->e+ ν , π+ -->μ+ ν , decay-in-flight, pile-up, and hadronic events) using Monte Carlo verified probability distribution functions of our observables (energies, times, etc). A progress report on the PEN maximum likelihood analysis will be presented. Work supported by NSF grant PHY-0970013.
Risser, V.V.
1981-12-01
The system plans, construction, integration and test, and performance evaluation are discussed for the photovoltaic power supply at the Newman Power Station in El Paso, Texas. The system consists of 64 parallel-connected panels, each panel containing nine series-connected photovoltaic modules. The system is connected, through power monitoring equipment, to an existing DC bus that supplies uninterruptible power to a computer that controls the power generating equipment. The site is described and possible environmental hazards are assessed. Site preparation and the installation of the photovoltaic panels, electrical cabling, and instrumentation subsystems are described. System testing includes initial system checkout, module performance test, control system test. A training program for operators and maintenance personnel is briefly described, including visual aids. Performance data collection and analysis are described, and actual data are compared with a computer simulation. System drawings are included. (LEW)
Maximum Likelihood Estimation of the Identification Parameters and Its Correction
无
2002-01-01
By taking the subsequence out of the input-output sequence of a system polluted by white noise, anindependent observation sequence and its probability density are obtained and then a maximum likelihood estimation of theidentification parameters is given. In order to decrease the asymptotic error, a corrector of maximum likelihood (CML)estimation with its recursive algorithm is given. It has been proved that the corrector has smaller asymptotic error thanthe least square methods. A simulation example shows that the corrector of maximum likelihood estimation is of higherapproximating precision to the true parameters than the least square methods.
Maximum frequency of the decametric radiation from Jupiter
Barrow, C. H.; Alexander, J. K.
1980-01-01
The upper frequency limits of Jupiter's decametric radio emission are found to be essentially the same when observed from the earth or, with considerably higher sensitivity, from the Voyager spacecraft close to Jupiter. This suggests that the maximum frequency is a real cut-off corresponding to a maximum gyrofrequency of about 38-40 MHz at Jupiter. It no longer appears to be necessary to specify different cut-off frequencies for the Io and non-Io emission as the maximum frequencies are roughly the same in each case.
Semidefinite Programming for Approximate Maximum Likelihood Sinusoidal Parameter Estimation
2009-01-01
We study the convex optimization approach for parameter estimation of several sinusoidal models, namely, single complex/real tone, multiple complex sinusoids, and single two-dimensional complex tone, in the presence of additive Gaussian noise. The major difficulty for optimally determining the parameters is that the corresponding maximum likelihood (ML) estimators involve finding the global minimum or maximum of multimodal cost functions because the frequencies are nonlinear in the observed s...
Receiver function estimated by maximum entropy deconvolution
吴庆举; 田小波; 张乃铃; 李卫平; 曾融生
2003-01-01
Maximum entropy deconvolution is presented to estimate receiver function, with the maximum entropy as the rule to determine auto-correlation and cross-correlation functions. The Toeplitz equation and Levinson algorithm are used to calculate the iterative formula of error-predicting filter, and receiver function is then estimated. During extrapolation, reflective coefficient is always less than 1, which keeps maximum entropy deconvolution stable. The maximum entropy of the data outside window increases the resolution of receiver function. Both synthetic and real seismograms show that maximum entropy deconvolution is an effective method to measure receiver function in time-domain.
Maximum Power from a Solar Panel
Michael Miller
2010-01-01
Full Text Available Solar energy has become a promising alternative to conventional fossil fuel sources. Solar panels are used to collect solar radiation and convert it into electricity. One of the techniques used to maximize the effectiveness of this energy alternative is to maximize the power output of the solar collector. In this project the maximum power is calculated by determining the voltage and the current of maximum power. These quantities are determined by finding the maximum value for the equation for power using differentiation. After the maximum values are found for each time of day, each individual quantity, voltage of maximum power, current of maximum power, and maximum power is plotted as a function of the time of day.
A tropospheric ozone maximum over the equatorial Southern Indian Ocean
L. Zhang
2012-05-01
Full Text Available We examine the distribution of tropical tropospheric ozone (O_{3} from the Microwave Limb Sounder (MLS and the Tropospheric Emission Spectrometer (TES by using a global three-dimensional model of tropospheric chemistry (GEOS-Chem. MLS and TES observations of tropospheric O_{3} during 2005 to 2009 reveal a distinct, persistent O_{3} maximum, both in mixing ratio and tropospheric column, in May over the Equatorial Southern Indian Ocean (ESIO. The maximum is most pronounced in 2006 and 2008 and less evident in the other three years. This feature is also consistent with the total column O_{3} observations from the Ozone Mapping Instrument (OMI and the Atmospheric Infrared Sounder (AIRS. Model results reproduce the observed May O_{3} maximum and the associated interannual variability. The origin of the maximum reflects a complex interplay of chemical and dynamic factors. The O_{3} maximum is dominated by the O_{3} production driven by lightning nitrogen oxides (NO_{x} emissions, which accounts for 62% of the tropospheric column O_{3} in May 2006. We find the contribution from biomass burning, soil, anthropogenic and biogenic sources to the O_{3} maximum are rather small. The O_{3} productions in the lightning outflow from Central Africa and South America both peak in May and are directly responsible for the O_{3} maximum over the western ESIO. The lightning outflow from Equatorial Asia dominates over the eastern ESIO. The interannual variability of the O_{3} maximum is driven largely by the anomalous anti-cyclones over the southern Indian Ocean in May 2006 and 2008. The lightning outflow from Central Africa and South America is effectively entrained by the anti-cyclones followed by northward transport to the ESIO.
Maximum lying bout duration affects the occurrence of shoulder lesions in sows
Westin Rebecka
2009-11-01
Full Text Available Abstract Shoulder lesions are caused by tissue breakdown of the skin and/or underlying tissue as a result of long lasting pressure. The lesions are commonly seen in sows during the period of lactation and contribute to poor animal welfare as well as affecting the consumers' attitudes towards the swine industry. The aim of this study was to investigate the correlation between prolonged recumbency during early lactation and development of shoulder lesions, in particular the lying bout time. Eighteen sows of Swedish Landrace were observed for 24 hours during the day of farrowing and day 2, 4, 9 and 11 after farrowing in May 2009. The data were analysed for correlations between the duration of the longest observed uninterrupted lying bout and the prevalence of shoulder lesions recorded at weaning (week 5. In the study, shoulder lesions were observed in eight of the eighteen sows at the time of weaning. The total lying time of the sows was highest on day 0 and day 2, when the proportion of time spent in lateral recumbency over the 24-hour period was on average 80 percent. The longest lying bout had an average duration of 6,3 hours (right side and 7,2 hours (left side. A significant correlation (Spearman rank coefficient = 0,88; P
Stone, Wesley W.; Gilliom, Robert J.; Crawford, Charles G.
2008-01-01
Regression models were developed for predicting annual maximum and selected annual maximum moving-average concentrations of atrazine in streams using the Watershed Regressions for Pesticides (WARP) methodology developed by the National Water-Quality Assessment Program (NAWQA) of the U.S. Geological Survey (USGS). The current effort builds on the original WARP models, which were based on the annual mean and selected percentiles of the annual frequency distribution of atrazine concentrations. Estimates of annual maximum and annual maximum moving-average concentrations for selected durations are needed to characterize the levels of atrazine and other pesticides for comparison to specific water-quality benchmarks for evaluation of potential concerns regarding human health or aquatic life. Separate regression models were derived for the annual maximum and annual maximum 21-day, 60-day, and 90-day moving-average concentrations. Development of the regression models used the same explanatory variables, transformations, model development data, model validation data, and regression methods as those used in the original development of WARP. The models accounted for 72 to 75 percent of the variability in the concentration statistics among the 112 sampling sites used for model development. Predicted concentration statistics from the four models were within a factor of 10 of the observed concentration statistics for most of the model development and validation sites. Overall, performance of the models for the development and validation sites supports the application of the WARP models for predicting annual maximum and selected annual maximum moving-average atrazine concentration in streams and provides a framework to interpret the predictions in terms of uncertainty. For streams with inadequate direct measurements of atrazine concentrations, the WARP model predictions for the annual maximum and the annual maximum moving-average atrazine concentrations can be used to characterize
The inverse maximum dynamic flow problem
BAGHERIAN; Mehri
2010-01-01
We consider the inverse maximum dynamic flow (IMDF) problem.IMDF problem can be described as: how to change the capacity vector of a dynamic network as little as possible so that a given feasible dynamic flow becomes a maximum dynamic flow.After discussing some characteristics of this problem,it is converted to a constrained minimum dynamic cut problem.Then an efficient algorithm which uses two maximum dynamic flow algorithms is proposed to solve the problem.
Maximum permissible voltage of YBCO coated conductors
Wen, J.; Lin, B.; Sheng, J.; Xu, J.; Jin, Z. [Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China); Hong, Z., E-mail: zhiyong.hong@sjtu.edu.cn [Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China); Wang, D.; Zhou, H.; Shen, X.; Shen, C. [Qingpu Power Supply Company, State Grid Shanghai Municipal Electric Power Company, Shanghai (China)
2014-06-15
Highlights: • We examine three kinds of tapes’ maximum permissible voltage. • We examine the relationship between quenching duration and maximum permissible voltage. • Continuous I{sub c} degradations under repetitive quenching where tapes reaching maximum permissible voltage. • The relationship between maximum permissible voltage and resistance, temperature. - Abstract: Superconducting fault current limiter (SFCL) could reduce short circuit currents in electrical power system. One of the most important thing in developing SFCL is to find out the maximum permissible voltage of each limiting element. The maximum permissible voltage is defined as the maximum voltage per unit length at which the YBCO coated conductors (CC) do not suffer from critical current (I{sub c}) degradation or burnout. In this research, the time of quenching process is changed and voltage is raised until the I{sub c} degradation or burnout happens. YBCO coated conductors test in the experiment are from American superconductor (AMSC) and Shanghai Jiao Tong University (SJTU). Along with the quenching duration increasing, the maximum permissible voltage of CC decreases. When quenching duration is 100 ms, the maximum permissible of SJTU CC, 12 mm AMSC CC and 4 mm AMSC CC are 0.72 V/cm, 0.52 V/cm and 1.2 V/cm respectively. Based on the results of samples, the whole length of CCs used in the design of a SFCL can be determined.
Generalised maximum entropy and heterogeneous technologies
Oude Lansink, A.G.J.M.
1999-01-01
Generalised maximum entropy methods are used to estimate a dual model of production on panel data of Dutch cash crop farms over the period 1970-1992. The generalised maximum entropy approach allows a coherent system of input demand and output supply equations to be estimated for each farm in the sam
20 CFR 229.48 - Family maximum.
2010-04-01
... month on one person's earnings record is limited. This limited amount is called the family maximum. The family maximum used to adjust the social security overall minimum rate is based on the employee's Overall..., when any of the persons entitled to benefits on the insured individual's compensation would, except...
Construction Method of Uninterruptible Power Crossing 1 0 kV Overhead Lines%一种不停电跨越10 kV架空线路的施工方法
黄顺涛; 陈文军
2015-01-01
Two-time power cut is required for traditional construction of crossing electric power lines. In order to improve power supply reliability,a kind of construction method of uninterruptible power disassembling 1 0 kV overhead lines was pro-posed. By means of coil typed insulating sheaths,the overhead lines were isolated and nesting between insulating sheath and lines was realized in a way of occlusion of interfaces of insulation buckles. New type high polymer materials were used to make insulating sheaths for improving toughness and scroll wheel occlusal assistant devices were used for installing the insula-ting sheaths so as to reduce wearing and labor intensity. This construction method was applied in six power transmission and transformation projects of Zhuhai Power Supply Bureau of Guangdong Power Grid Co.,Ltd. which could complete con-struction of lines crossing in uninterruptible power state and reduce 4 932 households as power cut. Meanwhile,it could avoid industry and agriculture losses of 6 636 300~8 295 400 yuan which might bring about obvious social and economic benefits.%传统的跨越电力线路施工方法需对用户停电2次,为提高供电可靠性,提出一种不停电装拆10 kV 架空线路跨越架的施工方法。该施工方法通过盘卷式绝缘护套隔离架空线路,并以卡扣接口咬合方式实现绝缘护套与线路的嵌套,采用新型高分子材料制作绝缘护套以提高韧性,利用滚轮咬合辅助器装设绝缘护套以降低磨损和劳动强度。该施工方法在广东电网有限责任公司珠海供电局的6个输变电工程中应用,均可完成不停电状态下的线路跨越施工,共减少停电时户数4932,避免了663.63~829.54万元的工农业经济损失,社会效益和经济效益显著。
Duality of Maximum Entropy and Minimum Divergence
Shinto Eguchi
2014-06-01
Full Text Available We discuss a special class of generalized divergence measures by the use of generator functions. Any divergence measure in the class is separated into the difference between cross and diagonal entropy. The diagonal entropy measure in the class associates with a model of maximum entropy distributions; the divergence measure leads to statistical estimation via minimization, for arbitrarily giving a statistical model. The dualistic relationship between the maximum entropy model and the minimum divergence estimation is explored in the framework of information geometry. The model of maximum entropy distributions is characterized to be totally geodesic with respect to the linear connection associated with the divergence. A natural extension for the classical theory for the maximum likelihood method under the maximum entropy model in terms of the Boltzmann-Gibbs-Shannon entropy is given. We discuss the duality in detail for Tsallis entropy as a typical example.
Heteroscedastic one-factor models and marginal maximum likelihood estimation
Hessen, D.J.; Dolan, C.V.
2009-01-01
In the present paper, a general class of heteroscedastic one-factor models is considered. In these models, the residual variances of the observed scores are explicitly modelled as parametric functions of the one-dimensional factor score. A marginal maximum likelihood procedure for parameter estimati
Kuracina Richard
2015-06-01
Full Text Available The article deals with the measurement of maximum explosion pressure and the maximum rate of exposure pressure rise of wood dust cloud. The measurements were carried out according to STN EN 14034-1+A1:2011 Determination of explosion characteristics of dust clouds. Part 1: Determination of the maximum explosion pressure pmax of dust clouds and the maximum rate of explosion pressure rise according to STN EN 14034-2+A1:2012 Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dtmax of dust clouds. The wood dust cloud in the chamber is achieved mechanically. The testing of explosions of wood dust clouds showed that the maximum value of the pressure was reached at the concentrations of 450 g / m3 and its value is 7.95 bar. The fastest increase of pressure was observed at the concentrations of 450 g / m3 and its value was 68 bar / s.
Cocchieri Riccardo
2011-03-01
Full Text Available Abstract Background Malnutrition is very common in patients undergoing cardiac surgery. Malnutrition can change myocardial substrate utilization which can induce adverse effects on myocardial metabolism and function. We aim to investigate the hypothesis that there is a disturbed amino acids profile in the cardiac surgical patient which can be normalized by (parenteral nutrition before, during and after surgery, subsequently improving cardiomyocyte structure, cardiac perfusion and glucose metabolism. Methods/Design This randomized controlled intervention study investigates the effect of uninterrupted perioperative (parenteral nutrition on cardiac function in 48 patients undergoing coronary artery bypass grafting. Patients are given enteral nutrition (n = 16 or parenteral nutrition (n = 16, at least two days before, during, and two days after coronary artery bypass grafting, or are treated according to the standard guidelines (control (n = 16. We will illustrate the effect of (parenteral nutrition on differences in concentrations of amino acids and asymmetric dimethylarginine and in activity of dimethylarginine dimethylaminohydrolase and arginase in cardiac tissue and blood plasma. In addition, cardiomyocyte structure by histological, immuno-histochemical and ultrastructural analysis will be compared between the (parenteral and control group. Furthermore, differences in cardiac perfusion and global left ventricular function and glucose metabolism, and their changes after coronary artery bypass grafting are evaluated by electrocardiography-gated myocardial perfusion scintigraphy and 18F-fluorodeoxy-glucose positron emission tomography respectively. Finally, fat free mass is measured before and after intervention with bioelectrical impedance spectrometry in order to evaluate nutritional status. Trial registration Netherlands Trial Register (NTR: NTR2183
李伟杰; 洪键; 何凡; 李玉涛; 许亮亮; 杨冰昀
2015-01-01
不间断电源(uninterruptible power supply)是能为负载提供不间断电源和清洁电源的供电系统.根据船级社规范的要求,不间断电源对于动力定位系统是必不可少的.现以一艘实际深水钻井船为例,从动力定位系统(dynamic positioning system)的DP3级的角度阐述DP控制系统的不间断电源设计.本文首先介绍了常用的两种不间断电源的类型,再从动力定位系统的角度阐述了不间断电源的负载分配,最后再具体说明了不间断电源在设备布置时需要考虑的要点.
陈丰
2012-01-01
This article proposed an idea of the off-grid new energy uninterruptible power supply system for areas with no electric power, and made a detail discussion and optimized design to wind/PV hybrid power system for design method, capacity configuration, design procedure, and equipment selection, and demonstrated the rationality and feasibility of sys- tem optimization design combined with wind/PV/oil hybrid power system for military project.%针对无电地区设备不问断供电难的问题，提出采用新能源离网型不间断供电的思路；对风光互补供电系统的设计方法、容量配置的计算方法和设备的选型等做了详细讨论和优化设计，并结合军用风光油互补系统实验样机的实际应用，论证了系统优化设计的合理性和可行性。
Generalized Relativistic Wave Equations with Intrinsic Maximum Momentum
Ching, Chee Leong
2013-01-01
We examine the nonperturbative effect of maximum momentum on the relativistic wave equations. In momentum representation, we obtain the exact eigen-energies and wavefunctions of one-dimensional Klein-Gordon and Dirac equation with linear confining potentials, and the Dirac oscillator. Bound state solutions are only possible when the strength of scalar potential are stronger than vector potential. The energy spectrum of the systems studied are bounded from above, whereby classical characteristics are observed in the uncertainties of position and momentum operators. Also, there is a truncation in the maximum number of bound states that is allowed. Some of these quantum-gravitational features may have future applications.
Generalized relativistic wave equations with intrinsic maximum momentum
Ching, Chee Leong; Ng, Wei Khim
2014-05-01
We examine the nonperturbative effect of maximum momentum on the relativistic wave equations. In momentum representation, we obtain the exact eigen-energies and wave functions of one-dimensional Klein-Gordon and Dirac equation with linear confining potentials, and the Dirac oscillator. Bound state solutions are only possible when the strength of scalar potential is stronger than vector potential. The energy spectrum of the systems studied is bounded from above, whereby classical characteristics are observed in the uncertainties of position and momentum operators. Also, there is a truncation in the maximum number of bound states that is allowed. Some of these quantum-gravitational features may have future applications.
A maximum in the strength of nanocrystalline copper
Schiøtz, Jakob; Jacobsen, Karsten Wedel
2003-01-01
We used molecular dynamics simulations with system sizes up to 100 million atoms to simulate plastic deformation of nanocrystalline copper. By varying the grain size between 5 and 50 nanometers, we show that the flow stress and thus the strength exhibit a maximum at a grain size of 10 to 15...... nanometers. This maximum is because of a shift in the microscopic deformation mechanism from dislocation-mediated plasticity in the coarse-grained material to grain boundary sliding in the nanocrystalline region. The simulations allow us to observe the mechanisms behind the grain-size dependence...
A dual method for maximum entropy restoration
Smith, C. B.
1979-01-01
A simple iterative dual algorithm for maximum entropy image restoration is presented. The dual algorithm involves fewer parameters than conventional minimization in the image space. Minicomputer test results for Fourier synthesis with inadequate phantom data are given.
Maximum Throughput in Multiple-Antenna Systems
Zamani, Mahdi
2012-01-01
The point-to-point multiple-antenna channel is investigated in uncorrelated block fading environment with Rayleigh distribution. The maximum throughput and maximum expected-rate of this channel are derived under the assumption that the transmitter is oblivious to the channel state information (CSI), however, the receiver has perfect CSI. First, we prove that in multiple-input single-output (MISO) channels, the optimum transmission strategy maximizing the throughput is to use all available antennas and perform equal power allocation with uncorrelated signals. Furthermore, to increase the expected-rate, multi-layer coding is applied. Analogously, we establish that sending uncorrelated signals and performing equal power allocation across all available antennas at each layer is optimum. A closed form expression for the maximum continuous-layer expected-rate of MISO channels is also obtained. Moreover, we investigate multiple-input multiple-output (MIMO) channels, and formulate the maximum throughput in the asympt...
Photoemission spectromicroscopy with MAXIMUM at Wisconsin
Ng, W.; Ray-Chaudhuri, A.K.; Cole, R.K.; Wallace, J.; Crossley, S.; Crossley, D.; Chen, G.; Green, M.; Guo, J.; Hansen, R.W.C.; Cerrina, F.; Margaritondo, G. (Dept. of Electrical Engineering, Dept. of Physics and Synchrotron Radiation Center, Univ. of Wisconsin, Madison (USA)); Underwood, J.H.; Korthright, J.; Perera, R.C.C. (Center for X-ray Optics, Accelerator and Fusion Research Div., Lawrence Berkeley Lab., CA (USA))
1990-06-01
We describe the development of the scanning photoemission spectromicroscope MAXIMUM at the Wisoncsin Synchrotron Radiation Center, which uses radiation from a 30-period undulator. The article includes a discussion of the first tests after the initial commissioning. (orig.).
Maximum-likelihood method in quantum estimation
Paris, M G A; Sacchi, M F
2001-01-01
The maximum-likelihood method for quantum estimation is reviewed and applied to the reconstruction of density matrix of spin and radiation as well as to the determination of several parameters of interest in quantum optics.
The maximum entropy technique. System's statistical description
Belashev, B Z
2002-01-01
The maximum entropy technique (MENT) is applied for searching the distribution functions of physical values. MENT takes into consideration the demand of maximum entropy, the characteristics of the system and the connection conditions, naturally. It is allowed to apply MENT for statistical description of closed and open systems. The examples in which MENT had been used for the description of the equilibrium and nonequilibrium states and the states far from the thermodynamical equilibrium are considered
19 CFR 114.23 - Maximum period.
2010-04-01
... 19 Customs Duties 1 2010-04-01 2010-04-01 false Maximum period. 114.23 Section 114.23 Customs... CARNETS Processing of Carnets § 114.23 Maximum period. (a) A.T.A. carnet. No A.T.A. carnet with a period of validity exceeding 1 year from date of issue shall be accepted. This period of validity cannot be...
Maximum-Likelihood Detection Of Noncoherent CPM
Divsalar, Dariush; Simon, Marvin K.
1993-01-01
Simplified detectors proposed for use in maximum-likelihood-sequence detection of symbols in alphabet of size M transmitted by uncoded, full-response continuous phase modulation over radio channel with additive white Gaussian noise. Structures of receivers derived from particular interpretation of maximum-likelihood metrics. Receivers include front ends, structures of which depends only on M, analogous to those in receivers of coherent CPM. Parts of receivers following front ends have structures, complexity of which would depend on N.
SEXUAL DIMORPHISM OF MAXIMUM FEMORAL LENGTH
Pandya A M
2011-04-01
Full Text Available Sexual identification from the skeletal parts has medico legal and anthropological importance. Present study aims to obtain values of maximum femoral length and to evaluate its possible usefulness in determining correct sexual identification. Study sample consisted of 184 dry, normal, adult, human femora (136 male & 48 female from skeletal collections of Anatomy department, M. P. Shah Medical College, Jamnagar, Gujarat. Maximum length of femur was considered as maximum vertical distance between upper end of head of femur and the lowest point on femoral condyle, measured with the osteometric board. Mean Values obtained were, 451.81 and 417.48 for right male and female, and 453.35 and 420.44 for left male and female respectively. Higher value in male was statistically highly significant (P< 0.001 on both sides. Demarking point (D.P. analysis of the data showed that right femora with maximum length more than 476.70 were definitely male and less than 379.99 were definitely female; while for left bones, femora with maximum length more than 484.49 were definitely male and less than 385.73 were definitely female. Maximum length identified 13.43% of right male femora, 4.35% of right female femora, 7.25% of left male femora and 8% of left female femora. [National J of Med Res 2011; 1(2.000: 67-70
Mass mortality of the vermetid gastropod Ceraesignum maximum
Brown, A. L.; Frazer, T. K.; Shima, J. S.; Osenberg, C. W.
2016-09-01
Ceraesignum maximum (G.B. Sowerby I, 1825), formerly Dendropoma maximum, was subject to a sudden, massive die-off in the Society Islands, French Polynesia, in 2015. On Mo'orea, where we have detailed documentation of the die-off, these gastropods were previously found in densities up to 165 m-2. In July 2015, we surveyed shallow back reefs of Mo'orea before, during and after the die-off, documenting their swift decline. All censused populations incurred 100% mortality. Additional surveys and observations from Mo'orea, Tahiti, Bora Bora, and Huahine (but not Taha'a) suggested a similar, and approximately simultaneous, die-off. The cause(s) of this cataclysmic mass mortality are currently unknown. Given the previously documented negative effects of C. maximum on corals, we expect the die-off will have cascading effects on the reef community.
Semidefinite Programming for Approximate Maximum Likelihood Sinusoidal Parameter Estimation
Kenneth W. K. Lui
2009-01-01
Full Text Available We study the convex optimization approach for parameter estimation of several sinusoidal models, namely, single complex/real tone, multiple complex sinusoids, and single two-dimensional complex tone, in the presence of additive Gaussian noise. The major difficulty for optimally determining the parameters is that the corresponding maximum likelihood (ML estimators involve finding the global minimum or maximum of multimodal cost functions because the frequencies are nonlinear in the observed signals. By relaxing the nonconvex ML formulations using semidefinite programs, high-fidelity approximate solutions are obtained in a globally optimum fashion. Computer simulations are included to contrast the estimation performance of the proposed semi-definite relaxation methods with the iterative quadratic maximum likelihood technique as well as Cramér-Rao lower bound.
Semidefinite Programming for Approximate Maximum Likelihood Sinusoidal Parameter Estimation
Lui, Kenneth W. K.; So, H. C.
2009-12-01
We study the convex optimization approach for parameter estimation of several sinusoidal models, namely, single complex/real tone, multiple complex sinusoids, and single two-dimensional complex tone, in the presence of additive Gaussian noise. The major difficulty for optimally determining the parameters is that the corresponding maximum likelihood (ML) estimators involve finding the global minimum or maximum of multimodal cost functions because the frequencies are nonlinear in the observed signals. By relaxing the nonconvex ML formulations using semidefinite programs, high-fidelity approximate solutions are obtained in a globally optimum fashion. Computer simulations are included to contrast the estimation performance of the proposed semi-definite relaxation methods with the iterative quadratic maximum likelihood technique as well as Cramér-Rao lower bound.
Maximum permissible voltage of YBCO coated conductors
Wen, J.; Lin, B.; Sheng, J.; Xu, J.; Jin, Z.; Hong, Z.; Wang, D.; Zhou, H.; Shen, X.; Shen, C.
2014-06-01
Superconducting fault current limiter (SFCL) could reduce short circuit currents in electrical power system. One of the most important thing in developing SFCL is to find out the maximum permissible voltage of each limiting element. The maximum permissible voltage is defined as the maximum voltage per unit length at which the YBCO coated conductors (CC) do not suffer from critical current (Ic) degradation or burnout. In this research, the time of quenching process is changed and voltage is raised until the Ic degradation or burnout happens. YBCO coated conductors test in the experiment are from American superconductor (AMSC) and Shanghai Jiao Tong University (SJTU). Along with the quenching duration increasing, the maximum permissible voltage of CC decreases. When quenching duration is 100 ms, the maximum permissible of SJTU CC, 12 mm AMSC CC and 4 mm AMSC CC are 0.72 V/cm, 0.52 V/cm and 1.2 V/cm respectively. Based on the results of samples, the whole length of CCs used in the design of a SFCL can be determined.
Computing Rooted and Unrooted Maximum Consistent Supertrees
van Iersel, Leo
2009-01-01
A chief problem in phylogenetics and database theory is the computation of a maximum consistent tree from a set of rooted or unrooted trees. A standard input are triplets, rooted binary trees on three leaves, or quartets, unrooted binary trees on four leaves. We give exact algorithms constructing rooted and unrooted maximum consistent supertrees in time O(2^n n^5 m^2 log(m)) for a set of m triplets (quartets), each one distinctly leaf-labeled by some subset of n labels. The algorithms extend to weighted triplets (quartets). We further present fast exact algorithms for constructing rooted and unrooted maximum consistent trees in polynomial space. Finally, for a set T of m rooted or unrooted trees with maximum degree D and distinctly leaf-labeled by some subset of a set L of n labels, we compute, in O(2^{mD} n^m m^5 n^6 log(m)) time, a tree distinctly leaf-labeled by a maximum-size subset X of L that all trees in T, when restricted to X, are consistent with.
The Wiener maximum quadratic assignment problem
Cela, Eranda; Woeginger, Gerhard J
2011-01-01
We investigate a special case of the maximum quadratic assignment problem where one matrix is a product matrix and the other matrix is the distance matrix of a one-dimensional point set. We show that this special case, which we call the Wiener maximum quadratic assignment problem, is NP-hard in the ordinary sense and solvable in pseudo-polynomial time. Our approach also yields a polynomial time solution for the following problem from chemical graph theory: Find a tree that maximizes the Wiener index among all trees with a prescribed degree sequence. This settles an open problem from the literature.
Maximum confidence measurements via probabilistic quantum cloning
Zhang Wen-Hai; Yu Long-Bao; Cao Zhuo-Liang; Ye Liu
2013-01-01
Probabilistic quantum cloning (PQC) cannot copy a set of linearly dependent quantum states.In this paper,we show that if incorrect copies are allowed to be produced,linearly dependent quantum states may also be cloned by the PQC.By exploiting this kind of PQC to clone a special set of three linearly dependent quantum states,we derive the upper bound of the maximum confidence measure of a set.An explicit transformation of the maximum confidence measure is presented.
Revealing the Maximum Strength in Nanotwinned Copper
Lu, L.; Chen, X.; Huang, Xiaoxu
2009-01-01
The strength of polycrystalline materials increases with decreasing grain size. Below a critical size, smaller grains might lead to softening, as suggested by atomistic simulations. The strongest size should arise at a transition in deformation mechanism from lattice dislocation activities to grain...... boundary–related processes. We investigated the maximum strength of nanotwinned copper samples with different twin thicknesses. We found that the strength increases with decreasing twin thickness, reaching a maximum at 15 nanometers, followed by a softening at smaller values that is accompanied by enhanced...
The Maximum Resource Bin Packing Problem
Boyar, J.; Epstein, L.; Favrholdt, L.M.
2006-01-01
Usually, for bin packing problems, we try to minimize the number of bins used or in the case of the dual bin packing problem, maximize the number or total size of accepted items. This paper presents results for the opposite problems, where we would like to maximize the number of bins used...... algorithms, First-Fit-Increasing and First-Fit-Decreasing for the maximum resource variant of classical bin packing. For the on-line variant, we define maximum resource variants of classical and dual bin packing. For dual bin packing, no on-line algorithm is competitive. For classical bin packing, we find...
Maximum entropy analysis of EGRET data
Pohl, M.; Strong, A.W.
1997-01-01
EGRET data are usually analysed on the basis of the Maximum-Likelihood method \\cite{ma96} in a search for point sources in excess to a model for the background radiation (e.g. \\cite{hu97}). This method depends strongly on the quality of the background model, and thus may have high systematic unce...... uncertainties in region of strong and uncertain background like the Galactic Center region. Here we show images of such regions obtained by the quantified Maximum-Entropy method. We also discuss a possible further use of MEM in the analysis of problematic regions of the sky....
Revealing the Maximum Strength in Nanotwinned Copper
Lu, L.; Chen, X.; Huang, Xiaoxu
2009-01-01
The strength of polycrystalline materials increases with decreasing grain size. Below a critical size, smaller grains might lead to softening, as suggested by atomistic simulations. The strongest size should arise at a transition in deformation mechanism from lattice dislocation activities to grain...... boundary–related processes. We investigated the maximum strength of nanotwinned copper samples with different twin thicknesses. We found that the strength increases with decreasing twin thickness, reaching a maximum at 15 nanometers, followed by a softening at smaller values that is accompanied by enhanced...
童洁; 陈晓刚; 侯伟宏
2013-01-01
In view of 220 kV Yunhui smart substation in Hangzhou municipal electric power bureau,combination of traditional secondary equipment and primary equipment with interruption of power supply for relay protection verification may increase scheduled outages of primary equipment and reduce power supply reliability.In order to ensure uninterruption of power supply relay protection verification for smart substation,some technologies including sample fiber optic network,GOOSE fiber optic network,GOOSE message,double-test line protection device,and complete double protection,are used to design GOOSE outlet safety measure of Yunhui smart substation.And then,the basic principle of online verification GOOSE outlet safety measure is proposed.At the same time,it discusses the safety measure of uninterruption of power supply protection verification for smart substation and engineering practice.So,it achieves the relay protection verification without power cut in China.Furthermore,it proves the reliability of online relay protection verification technolo gy without power cut in smart substation.%针对杭州电力局220 kV云会全智能变电站继电保护系统,采用传统的二次设备伴随一次设备停电的传统方法进行电力系统继电保护校验,增加了一次设备计划停电次数、降低了供电可靠性等.为使智能变电站继电保护不停电校验,充分利用智能变电站采样值光纤网络技术、GOOSE光纤网络技术、GOOSE心跳报文技术、双重化的保测一体化线路保护装置、双套保护实现完全双重化设计等整合出云会全智能化变电站的GOOSE出口安措技术,提出了在线校验GOOSE出口安措的基本原则,探索了智能变电站不停电保护校验的安措,并进行了智能变电站不停电保护校验的工程实践,实现了我国智能变电站继电保护不停电校验,进而验证了智能化变电站继电保护不停电在线校验安措技术的可靠性.
陈道炼
2008-01-01
提出了一类单级并联式高功率因数直流不间断电源(uninterruptible power supply,UPS)电路结构与拓扑族.它是由二极管整流桥与具有功率因数校正、不间断供电、快速输出电压调节等功能的并联式变换器构成.也可以看成是由主直流变换器、辅助直流变换器和充电器3个模块构成.以Buck-Boost式拓扑为例,深入分析研究了这类变换器的工作模式、稳态原理特性、控制策略,给出了关键电路参数设计准则.理论分析与试验结果表明,这类变换器具有单级功率变换、对负载真正的在线不间断供电、网侧功率因数高、蓄电池与电网高频电气隔离、输出电压调节速度快、不需故障检测及模式转换电路、体积重量小、成本低等优点.
Maximum-likelihood fits to histograms for improved parameter estimation
Fowler, Joseph W
2013-01-01
Straightforward methods for adapting the familiar chi^2 statistic to histograms of discrete events and other Poisson distributed data generally yield biased estimates of the parameters of a model. The bias can be important even when the total number of events is large. For the case of estimating a microcalorimeter's energy resolution at 6 keV from the observed shape of the Mn K-alpha fluorescence spectrum, a poor choice of chi^2 can lead to biases of at least 10% in the estimated resolution when up to thousands of photons are observed. The best remedy is a Poisson maximum-likelihood fit, through a simple modification of the standard Levenberg-Marquardt algorithm for chi^2 minimization. Where the modification is not possible, another approach allows iterative approximation of the maximum-likelihood fit.
Novel TPPO Based Maximum Power Point Method for Photovoltaic System
ABBASI, M. A.
2017-08-01
Full Text Available Photovoltaic (PV system has a great potential and it is installed more when compared with other renewable energy sources nowadays. However, the PV system cannot perform optimally due to its solid reliance on climate conditions. Due to this dependency, PV system does not operate at its maximum power point (MPP. Many MPP tracking methods have been proposed for this purpose. One of these is the Perturb and Observe Method (P&O which is the most famous due to its simplicity, less cost and fast track. But it deviates from MPP in continuously changing weather conditions, especially in rapidly changing irradiance conditions. A new Maximum Power Point Tracking (MPPT method, Tetra Point Perturb and Observe (TPPO, has been proposed to improve PV system performance in changing irradiance conditions and the effects on characteristic curves of PV array module due to varying irradiance are delineated. The Proposed MPPT method has shown better results in increasing the efficiency of a PV system.
A probabilistic approach to the concept of Probable Maximum Precipitation
Papalexiou, S. M.; D. Koutsoyiannis
2006-01-01
International audience; The concept of Probable Maximum Precipitation (PMP) is based on the assumptions that (a) there exists an upper physical limit of the precipitation depth over a given area at a particular geographical location at a certain time of year, and (b) that this limit can be estimated based on deterministic considerations. The most representative and widespread estimation method of PMP is the so-called moisture maximization method. This method maximizes observed storms assuming...
Analysis of Photovoltaic Maximum Power Point Trackers
Veerachary, Mummadi
The photovoltaic generator exhibits a non-linear i-v characteristic and its maximum power point (MPP) varies with solar insolation. An intermediate switch-mode dc-dc converter is required to extract maximum power from the photovoltaic array. In this paper buck, boost and buck-boost topologies are considered and a detailed mathematical analysis, both for continuous and discontinuous inductor current operation, is given for MPP operation. The conditions on the connected load values and duty ratio are derived for achieving the satisfactory maximum power point operation. Further, it is shown that certain load values, falling out of the optimal range, will drive the operating point away from the true maximum power point. Detailed comparison of various topologies for MPPT is given. Selection of the converter topology for a given loading is discussed. Detailed discussion on circuit-oriented model development is given and then MPPT effectiveness of various converter systems is verified through simulations. Proposed theory and analysis is validated through experimental investigations.
On maximum cycle packings in polyhedral graphs
Peter Recht
2014-04-01
Full Text Available This paper addresses upper and lower bounds for the cardinality of a maximum vertex-/edge-disjoint cycle packing in a polyhedral graph G. Bounds on the cardinality of such packings are provided, that depend on the size, the order or the number of faces of G, respectively. Polyhedral graphs are constructed, that attain these bounds.
Hard graphs for the maximum clique problem
Hoede, Cornelis
1988-01-01
The maximum clique problem is one of the NP-complete problems. There are graphs for which a reduction technique exists that transforms the problem for these graphs into one for graphs with specific properties in polynomial time. The resulting graphs do not grow exponentially in order and number. Gra
Maximum Likelihood Estimation of Search Costs
J.L. Moraga-Gonzalez (José Luis); M.R. Wildenbeest (Matthijs)
2006-01-01
textabstractIn a recent paper Hong and Shum (forthcoming) present a structural methodology to estimate search cost distributions. We extend their approach to the case of oligopoly and present a maximum likelihood estimate of the search cost distribution. We apply our method to a data set of online p
Global characterization of the Holocene Thermal Maximum
Renssen, H.; Seppä, H.; Crosta, X.; Goosse, H.; Roche, D.M.V.A.P.
2012-01-01
We analyze the global variations in the timing and magnitude of the Holocene Thermal Maximum (HTM) and their dependence on various forcings in transient simulations covering the last 9000 years (9 ka), performed with a global atmosphere-ocean-vegetation model. In these experiments, we consider the i
Instance Optimality of the Adaptive Maximum Strategy
L. Diening; C. Kreuzer; R. Stevenson
2016-01-01
In this paper, we prove that the standard adaptive finite element method with a (modified) maximum marking strategy is instance optimal for the total error, being the square root of the squared energy error plus the squared oscillation. This result will be derived in the model setting of Poisson’s e
Maximum phonation time: variability and reliability.
Speyer, Renée; Bogaardt, Hans C A; Passos, Valéria Lima; Roodenburg, Nel P H D; Zumach, Anne; Heijnen, Mariëlle A M; Baijens, Laura W J; Fleskens, Stijn J H M; Brunings, Jan W
2010-05-01
The objective of the study was to determine maximum phonation time reliability as a function of the number of trials, days, and raters in dysphonic and control subjects. Two groups of adult subjects participated in this reliability study: a group of outpatients with functional or organic dysphonia versus a group of healthy control subjects matched by age and gender. Over a period of maximally 6 weeks, three video recordings were made of five subjects' maximum phonation time trials. A panel of five experts were responsible for all measurements, including a repeated measurement of the subjects' first recordings. Patients showed significantly shorter maximum phonation times compared with healthy controls (on average, 6.6 seconds shorter). The averaged interclass correlation coefficient (ICC) over all raters per trial for the first day was 0.998. The averaged reliability coefficient per rater and per trial for repeated measurements of the first day's data was 0.997, indicating high intrarater reliability. The mean reliability coefficient per day for one trial was 0.939. When using five trials, the reliability increased to 0.987. The reliability over five trials for a single day was 0.836; for 2 days, 0.911; and for 3 days, 0.935. To conclude, the maximum phonation time has proven to be a highly reliable measure in voice assessment. A single rater is sufficient to provide highly reliable measurements.
Maximum Phonation Time: Variability and Reliability
R. Speyer; H.C.A. Bogaardt; V.L. Passos; N.P.H.D. Roodenburg; A. Zumach; M.A.M. Heijnen; L.W.J. Baijens; S.J.H.M. Fleskens; J.W. Brunings
2010-01-01
The objective of the study was to determine maximum phonation time reliability as a function of the number of trials, days, and raters in dysphonic and control subjects. Two groups of adult subjects participated in this reliability study: a group of outpatients with functional or organic dysphonia v
Maximum likelihood estimation of fractionally cointegrated systems
Lasak, Katarzyna
In this paper we consider a fractionally cointegrated error correction model and investigate asymptotic properties of the maximum likelihood (ML) estimators of the matrix of the cointe- gration relations, the degree of fractional cointegration, the matrix of the speed of adjustment...
Maximum likelihood estimation for integrated diffusion processes
Baltazar-Larios, Fernando; Sørensen, Michael
EM-algorithm to obtain maximum likelihood estimates of the parameters in the diffusion model. As part of the algorithm, we use a recent simple method for approximate simulation of diffusion bridges. In simulation studies for the Ornstein-Uhlenbeck process and the CIR process the proposed method works...
Maximum gain of Yagi-Uda arrays
Bojsen, J.H.; Schjær-Jacobsen, Hans; Nilsson, E.
1971-01-01
Numerical optimisation techniques have been used to find the maximum gain of some specific parasitic arrays. The gain of an array of infinitely thin, equispaced dipoles loaded with arbitrary reactances has been optimised. The results show that standard travelling-wave design methods are not optimum....... Yagi–Uda arrays with equal and unequal spacing have also been optimised with experimental verification....
GROWTH ANALYSIS AND ASSESSMENT OF PIG’S BIOLOGICAL MAXIMUM
Dragutin Vincek
2010-06-01
Full Text Available The aim of this study was to determine a mathematical model which can be used to describe the growth of domestic animals in an attempt to predict the optimal time of slaughter/weight or the development of body parts or tissues and estimate the biological maximum. The study was conducted on 60 pigs (30 barrows and 30 gilts in the interval between the age of 49 and 215 days. By applying the generalized logistic function, the growth of live weight and tissues were described. The observed gilts reached the inflection point in approximately 121 days (I = 70.7 kg. The point at which the interval of intensive growth starts was at the age of approximately 42 days, (TB=17.35 kg and the saturation point the pigs reached at the age of 200.5 days (TC=126.74 kg. The estimated biological maximum weight of gilts was 179.79 kg. The barrows reached the inflection point in approximately 149 days (I=92.2 kg. The point at which the intensive interval of growth starts was estimated at the age of approximately 52 days (TB=22.93 kg, and the saturation point the barrows reached at the age of 245 days (TC=164.8 kg. The estimated biological maximum weight of barrows was 233.25 kg. Muscle tissue of gilts reached the inflection point (I = 28.46 kg in approximately 110 days. The point at which the interval of intensive growth of muscle tissue starts (TB=6.06 kg was estimated at approximately 53 days, and the saturation point of growth (TC=52.25 kg the muscle tissue of gilts reached at the age of 162 days. The estimated maximum biological growth of muscle tissue in gilts was 75.79 kg. The muscle tissue of barrows reached the inflection point (I=28.78 kg in approximately 118 days, the point at which the interval of intensive growth starts (TB=6.36 kg at the age of approximately 35 days. The saturation point of muscle tissue growth in barrows (TC=52.51 kg was reached at the age of 202 days. The estimated maximum biological growth of muscle tissue in barrows was 75.74 kg. The
郝晶莹; 王胜辉; 金月新; 郑洪
2015-01-01
Photovoltaic cells are devices for generating electric energy in the photovoltaic power generation system. The photovoltaic cells under operation will present a typical non-linear characteristic with the influence of the environ-mental temperature,irradiance and other factors. Moreover,under different external conditions,photovoltaic cells are able to run on different and unique maximum power point. The most commonly used method of maximum power point tracking was analyzed in this paper,and a new tracking method of maximum power was proposed which could realize the maximum power point fast tracking and solve the oscillation problem during the tracking process. The con-trol effectiveness is verified by Matlab/Simulink simulation,and good output waveform is obtained.%在光伏发电系统中光伏电池板是产生电能的装置，光伏电池运行受外界环境温度、辐照度等因素的影响，呈现出典型的非线性特征。外界条件不同时，光伏电池可运行在不同且唯一的最大功率点上。分析了最常用的最大功率点跟踪方法。并给出了一种新的最大功率跟踪方法，新方法能够快速跟踪到最大功率点，并且解决了跟踪过程的振荡问题。最后通过Matlab／Simulink仿真验证了控制有效性，得到了较好的输出波形。
Model Selection Through Sparse Maximum Likelihood Estimation
Banerjee, Onureena; D'Aspremont, Alexandre
2007-01-01
We consider the problem of estimating the parameters of a Gaussian or binary distribution in such a way that the resulting undirected graphical model is sparse. Our approach is to solve a maximum likelihood problem with an added l_1-norm penalty term. The problem as formulated is convex but the memory requirements and complexity of existing interior point methods are prohibitive for problems with more than tens of nodes. We present two new algorithms for solving problems with at least a thousand nodes in the Gaussian case. Our first algorithm uses block coordinate descent, and can be interpreted as recursive l_1-norm penalized regression. Our second algorithm, based on Nesterov's first order method, yields a complexity estimate with a better dependence on problem size than existing interior point methods. Using a log determinant relaxation of the log partition function (Wainwright & Jordan (2006)), we show that these same algorithms can be used to solve an approximate sparse maximum likelihood problem for...
Maximum-entropy description of animal movement.
Fleming, Chris H; Subaşı, Yiğit; Calabrese, Justin M
2015-03-01
We introduce a class of maximum-entropy states that naturally includes within it all of the major continuous-time stochastic processes that have been applied to animal movement, including Brownian motion, Ornstein-Uhlenbeck motion, integrated Ornstein-Uhlenbeck motion, a recently discovered hybrid of the previous models, and a new model that describes central-place foraging. We are also able to predict a further hierarchy of new models that will emerge as data quality improves to better resolve the underlying continuity of animal movement. Finally, we also show that Langevin equations must obey a fluctuation-dissipation theorem to generate processes that fall from this class of maximum-entropy distributions when the constraints are purely kinematic.
Pareto versus lognormal: a maximum entropy test.
Bee, Marco; Riccaboni, Massimo; Schiavo, Stefano
2011-08-01
It is commonly found that distributions that seem to be lognormal over a broad range change to a power-law (Pareto) distribution for the last few percentiles. The distributions of many physical, natural, and social events (earthquake size, species abundance, income and wealth, as well as file, city, and firm sizes) display this structure. We present a test for the occurrence of power-law tails in statistical distributions based on maximum entropy. This methodology allows one to identify the true data-generating processes even in the case when it is neither lognormal nor Pareto. The maximum entropy approach is then compared with other widely used methods and applied to different levels of aggregation of complex systems. Our results provide support for the theory that distributions with lognormal body and Pareto tail can be generated as mixtures of lognormally distributed units.
Maximum Variance Hashing via Column Generation
Lei Luo
2013-01-01
item search. Recently, a number of data-dependent methods have been developed, reflecting the great potential of learning for hashing. Inspired by the classic nonlinear dimensionality reduction algorithm—maximum variance unfolding, we propose a novel unsupervised hashing method, named maximum variance hashing, in this work. The idea is to maximize the total variance of the hash codes while preserving the local structure of the training data. To solve the derived optimization problem, we propose a column generation algorithm, which directly learns the binary-valued hash functions. We then extend it using anchor graphs to reduce the computational cost. Experiments on large-scale image datasets demonstrate that the proposed method outperforms state-of-the-art hashing methods in many cases.
The Maximum Resource Bin Packing Problem
Boyar, J.; Epstein, L.; Favrholdt, L.M.
2006-01-01
algorithms, First-Fit-Increasing and First-Fit-Decreasing for the maximum resource variant of classical bin packing. For the on-line variant, we define maximum resource variants of classical and dual bin packing. For dual bin packing, no on-line algorithm is competitive. For classical bin packing, we find......Usually, for bin packing problems, we try to minimize the number of bins used or in the case of the dual bin packing problem, maximize the number or total size of accepted items. This paper presents results for the opposite problems, where we would like to maximize the number of bins used...... the competitive ratio of various natural algorithms. We study the general versions of the problems as well as the parameterized versions where there is an upper bound of on the item sizes, for some integer k....
Nonparametric Maximum Entropy Estimation on Information Diagrams
Martin, Elliot A; Meinke, Alexander; Děchtěrenko, Filip; Davidsen, Jörn
2016-01-01
Maximum entropy estimation is of broad interest for inferring properties of systems across many different disciplines. In this work, we significantly extend a technique we previously introduced for estimating the maximum entropy of a set of random discrete variables when conditioning on bivariate mutual informations and univariate entropies. Specifically, we show how to apply the concept to continuous random variables and vastly expand the types of information-theoretic quantities one can condition on. This allows us to establish a number of significant advantages of our approach over existing ones. Not only does our method perform favorably in the undersampled regime, where existing methods fail, but it also can be dramatically less computationally expensive as the cardinality of the variables increases. In addition, we propose a nonparametric formulation of connected informations and give an illustrative example showing how this agrees with the existing parametric formulation in cases of interest. We furthe...
Regions of constrained maximum likelihood parameter identifiability
Lee, C.-H.; Herget, C. J.
1975-01-01
This paper considers the parameter identification problem of general discrete-time, nonlinear, multiple-input/multiple-output dynamic systems with Gaussian-white distributed measurement errors. Knowledge of the system parameterization is assumed to be known. Regions of constrained maximum likelihood (CML) parameter identifiability are established. A computation procedure employing interval arithmetic is proposed for finding explicit regions of parameter identifiability for the case of linear systems. It is shown that if the vector of true parameters is locally CML identifiable, then with probability one, the vector of true parameters is a unique maximal point of the maximum likelihood function in the region of parameter identifiability and the CML estimation sequence will converge to the true parameters.
A Maximum Radius for Habitable Planets.
Alibert, Yann
2015-09-01
We compute the maximum radius a planet can have in order to fulfill two constraints that are likely necessary conditions for habitability: 1- surface temperature and pressure compatible with the existence of liquid water, and 2- no ice layer at the bottom of a putative global ocean, that would prevent the operation of the geologic carbon cycle to operate. We demonstrate that, above a given radius, these two constraints cannot be met: in the Super-Earth mass range (1-12 Mearth), the overall maximum that a planet can have varies between 1.8 and 2.3 Rearth. This radius is reduced when considering planets with higher Fe/Si ratios, and taking into account irradiation effects on the structure of the gas envelope.
Maximum Profit Configurations of Commercial Engines
Yiran Chen
2011-01-01
An investigation of commercial engines with finite capacity low- and high-price economic subsystems and a generalized commodity transfer law [n ∝ Δ (P m)] in commodity flow processes, in which effects of the price elasticities of supply and demand are introduced, is presented in this paper. Optimal cycle configurations of commercial engines for maximum profit are obtained by applying optimal control theory. In some special cases, the eventual state—market equilibrium—is solely determined by t...
A stochastic maximum principle via Malliavin calculus
Øksendal, Bernt; Zhou, Xun Yu; Meyer-Brandis, Thilo
2008-01-01
This paper considers a controlled It\\^o-L\\'evy process where the information available to the controller is possibly less than the overall information. All the system coefficients and the objective performance functional are allowed to be random, possibly non-Markovian. Malliavin calculus is employed to derive a maximum principle for the optimal control of such a system where the adjoint process is explicitly expressed.
Maximum Estrada Index of Bicyclic Graphs
Wang, Long; Wang, Yi
2012-01-01
Let $G$ be a simple graph of order $n$, let $\\lambda_1(G),\\lambda_2(G),...,\\lambda_n(G)$ be the eigenvalues of the adjacency matrix of $G$. The Esrada index of $G$ is defined as $EE(G)=\\sum_{i=1}^{n}e^{\\lambda_i(G)}$. In this paper we determine the unique graph with maximum Estrada index among bicyclic graphs with fixed order.
Maximum privacy without coherence, zero-error
Leung, Debbie; Yu, Nengkun
2016-09-01
We study the possible difference between the quantum and the private capacities of a quantum channel in the zero-error setting. For a family of channels introduced by Leung et al. [Phys. Rev. Lett. 113, 030512 (2014)], we demonstrate an extreme difference: the zero-error quantum capacity is zero, whereas the zero-error private capacity is maximum given the quantum output dimension.
Automatic maximum entropy spectral reconstruction in NMR.
Mobli, Mehdi; Maciejewski, Mark W; Gryk, Michael R; Hoch, Jeffrey C
2007-10-01
Developments in superconducting magnets, cryogenic probes, isotope labeling strategies, and sophisticated pulse sequences together have enabled the application, in principle, of high-resolution NMR spectroscopy to biomolecular systems approaching 1 megadalton. In practice, however, conventional approaches to NMR that utilize the fast Fourier transform, which require data collected at uniform time intervals, result in prohibitively lengthy data collection times in order to achieve the full resolution afforded by high field magnets. A variety of approaches that involve nonuniform sampling have been proposed, each utilizing a non-Fourier method of spectrum analysis. A very general non-Fourier method that is capable of utilizing data collected using any of the proposed nonuniform sampling strategies is maximum entropy reconstruction. A limiting factor in the adoption of maximum entropy reconstruction in NMR has been the need to specify non-intuitive parameters. Here we describe a fully automated system for maximum entropy reconstruction that requires no user-specified parameters. A web-accessible script generator provides the user interface to the system.
A Maximum Resonant Set of Polyomino Graphs
Zhang Heping
2016-05-01
Full Text Available A polyomino graph P is a connected finite subgraph of the infinite plane grid such that each finite face is surrounded by a regular square of side length one and each edge belongs to at least one square. A dimer covering of P corresponds to a perfect matching. Different dimer coverings can interact via an alternating cycle (or square with respect to them. A set of disjoint squares of P is a resonant set if P has a perfect matching M so that each one of those squares is M-alternating. In this paper, we show that if K is a maximum resonant set of P, then P − K has a unique perfect matching. We further prove that the maximum forcing number of a polyomino graph is equal to the cardinality of a maximum resonant set. This confirms a conjecture of Xu et al. [26]. We also show that if K is a maximal alternating set of P, then P − K has a unique perfect matching.
The maximum rate of mammal evolution
Evans, Alistair R.; Jones, David; Boyer, Alison G.; Brown, James H.; Costa, Daniel P.; Ernest, S. K. Morgan; Fitzgerald, Erich M. G.; Fortelius, Mikael; Gittleman, John L.; Hamilton, Marcus J.; Harding, Larisa E.; Lintulaakso, Kari; Lyons, S. Kathleen; Okie, Jordan G.; Saarinen, Juha J.; Sibly, Richard M.; Smith, Felisa A.; Stephens, Patrick R.; Theodor, Jessica M.; Uhen, Mark D.
2012-03-01
How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous-Paleogene (K-Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes.
Minimal Length, Friedmann Equations and Maximum Density
Awad, Adel
2014-01-01
Inspired by Jacobson's thermodynamic approach[gr-qc/9504004], Cai et al [hep-th/0501055,hep-th/0609128] have shown the emergence of Friedmann equations from the first law of thermodynamics. We extend Akbar--Cai derivation [hep-th/0609128] of Friedmann equations to accommodate a general entropy-area law. Studying the resulted Friedmann equations using a specific entropy-area law, which is motivated by the generalized uncertainty principle (GUP), reveals the existence of a maximum energy density closed to Planck density. Allowing for a general continuous pressure $p(\\rho,a)$ leads to bounded curvature invariants and a general nonsingular evolution. In this case, the maximum energy density is reached in a finite time and there is no cosmological evolution beyond this point which leaves the big bang singularity inaccessible from a spacetime prospective. The existence of maximum energy density and a general nonsingular evolution is independent of the equation of state and the spacial curvature $k$. As an example w...
Maximum saliency bias in binocular fusion
Lu, Yuhao; Stafford, Tom; Fox, Charles
2016-07-01
Subjective experience at any instant consists of a single ("unitary"), coherent interpretation of sense data rather than a "Bayesian blur" of alternatives. However, computation of Bayes-optimal actions has no role for unitary perception, instead being required to integrate over every possible action-percept pair to maximise expected utility. So what is the role of unitary coherent percepts, and how are they computed? Recent work provided objective evidence for non-Bayes-optimal, unitary coherent, perception and action in humans; and further suggested that the percept selected is not the maximum a posteriori percept but is instead affected by utility. The present study uses a binocular fusion task first to reproduce the same effect in a new domain, and second, to test multiple hypotheses about exactly how utility may affect the percept. After accounting for high experimental noise, it finds that both Bayes optimality (maximise expected utility) and the previously proposed maximum-utility hypothesis are outperformed in fitting the data by a modified maximum-salience hypothesis, using unsigned utility magnitudes in place of signed utilities in the bias function.
The maximum rate of mammal evolution
Evans, Alistair R.; Jones, David; Boyer, Alison G.; Brown, James H.; Costa, Daniel P.; Ernest, S. K. Morgan; Fitzgerald, Erich M. G.; Fortelius, Mikael; Gittleman, John L.; Hamilton, Marcus J.; Harding, Larisa E.; Lintulaakso, Kari; Lyons, S. Kathleen; Okie, Jordan G.; Saarinen, Juha J.; Sibly, Richard M.; Smith, Felisa A.; Stephens, Patrick R.; Theodor, Jessica M.; Uhen, Mark D.
2012-01-01
How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous–Paleogene (K–Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes. PMID:22308461
Maximum-biomass prediction of homofermentative Lactobacillus.
Cui, Shumao; Zhao, Jianxin; Liu, Xiaoming; Chen, Yong Q; Zhang, Hao; Chen, Wei
2016-07-01
Fed-batch and pH-controlled cultures have been widely used for industrial production of probiotics. The aim of this study was to systematically investigate the relationship between the maximum biomass of different homofermentative Lactobacillus and lactate accumulation, and to develop a prediction equation for the maximum biomass concentration in such cultures. The accumulation of the end products and the depletion of nutrients by various strains were evaluated. In addition, the minimum inhibitory concentrations (MICs) of acid anions for various strains at pH 7.0 were examined. The lactate concentration at the point of complete inhibition was not significantly different from the MIC of lactate for all of the strains, although the inhibition mechanism of lactate and acetate on Lactobacillus rhamnosus was different from the other strains which were inhibited by the osmotic pressure caused by acid anions at pH 7.0. When the lactate concentration accumulated to the MIC, the strains stopped growing. The maximum biomass was closely related to the biomass yield per unit of lactate produced (YX/P) and the MIC (C) of lactate for different homofermentative Lactobacillus. Based on the experimental data obtained using different homofermentative Lactobacillus, a prediction equation was established as follows: Xmax - X0 = (0.59 ± 0.02)·YX/P·C.
The maximum rate of mammal evolution.
Evans, Alistair R; Jones, David; Boyer, Alison G; Brown, James H; Costa, Daniel P; Ernest, S K Morgan; Fitzgerald, Erich M G; Fortelius, Mikael; Gittleman, John L; Hamilton, Marcus J; Harding, Larisa E; Lintulaakso, Kari; Lyons, S Kathleen; Okie, Jordan G; Saarinen, Juha J; Sibly, Richard M; Smith, Felisa A; Stephens, Patrick R; Theodor, Jessica M; Uhen, Mark D
2012-03-13
How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous-Paleogene (K-Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes.
韦钦胜; 傅明珠; 李艳; 王保栋; 于志刚
2013-01-01
Based on the data obtained in four seasonal surveys during 2006 -2007 in the southern Huanghai (Yellow) Sea Cold Water Mass area ,the seasonal evolution of dissolved oxygen (DO) ,chlorophyll a(Chl a)maxi-mum phenomena and nutrient accumulating process was analyzed .The result showed that :(1)From spring to au-tumn ,the depth of DO and Chl a maximum layer had the trend of deepening first and then shallowing ,the scope of DO and Chl a maximum layer increased firstly and then decreased ,the depth and scope of DO and Chl a maximum layer were the largest in summer ;the DO and Chl a maximum phenomena disappeared in winter .(2)In DO maxi-mum layer in the deep waters of the cold water mass in summer ,DO concentration in summer was higher than in spring ,while in DO maximum layer in the boundary area of the cold water mass in summer ,DO concentration in summer was lower than in spring .(3)From spring to autumn ,Chl a concentration in Chl a maximum layer had the trend of decreasing firstly and then increasing ,and it was the lowest in summer ;in Chl a maximum layer located in the frontal region of the cold water mass in summer ,Chl a concentration in summer was the largest all the year round ,and was much higher than in deep waters .(4)The nutrient storage in the bottom cold water mass area of the southern Huanghai Sea had spatial heterogeneity ,generally ,there was a high -concentration core of nutrients in the deep waters and the boundary region of the cold water mass area respectively ,the one situating in the deep water had the fixed position on the whole all the year round ,while the one located in the boundary region of the cold wa-ter mass moved westward from spring to summer ,and then moved eastward again when autumn was coming . (5)Hydrological factors and bio-chemical effect played an important role in regulating the seasonal evolution of the DO and Chl a maximum phenomena as well the nutrient storage .% 基于2006-2007年在南黄海冷水团海域开展的4
Training Concept, Evolution Time, and the Maximum Entropy Production Principle
Alexey Bezryadin
2016-04-01
Full Text Available The maximum entropy production principle (MEPP is a type of entropy optimization which demands that complex non-equilibrium systems should organize such that the rate of the entropy production is maximized. Our take on this principle is that to prove or disprove the validity of the MEPP and to test the scope of its applicability, it is necessary to conduct experiments in which the entropy produced per unit time is measured with a high precision. Thus we study electric-field-induced self-assembly in suspensions of carbon nanotubes and realize precise measurements of the entropy production rate (EPR. As a strong voltage is applied the suspended nanotubes merge together into a conducting cloud which produces Joule heat and, correspondingly, produces entropy. We introduce two types of EPR, which have qualitatively different significance: global EPR (g-EPR and the entropy production rate of the dissipative cloud itself (DC-EPR. The following results are obtained: (1 As the system reaches the maximum of the DC-EPR, it becomes stable because the applied voltage acts as a stabilizing thermodynamic potential; (2 We discover metastable states characterized by high, near-maximum values of the DC-EPR. Under certain conditions, such efficient entropy-producing regimes can only be achieved if the system is allowed to initially evolve under mildly non-equilibrium conditions, namely at a reduced voltage; (3 Without such a “training” period the system typically is not able to reach the allowed maximum of the DC-EPR if the bias is high; (4 We observe that the DC-EPR maximum is achieved within a time, Te, the evolution time, which scales as a power-law function of the applied voltage; (5 Finally, we present a clear example in which the g-EPR theoretical maximum can never be achieved. Yet, under a wide range of conditions, the system can self-organize and achieve a dissipative regime in which the DC-EPR equals its theoretical maximum.
Maximum likelihood for genome phylogeny on gene content.
Zhang, Hongmei; Gu, Xun
2004-01-01
With the rapid growth of entire genome data, reconstructing the phylogenetic relationship among different genomes has become a hot topic in comparative genomics. Maximum likelihood approach is one of the various approaches, and has been very successful. However, there is no reported study for any applications in the genome tree-making mainly due to the lack of an analytical form of a probability model and/or the complicated calculation burden. In this paper we studied the mathematical structure of the stochastic model of genome evolution, and then developed a simplified likelihood function for observing a specific phylogenetic pattern under four genome situation using gene content information. We use the maximum likelihood approach to identify phylogenetic trees. Simulation results indicate that the proposed method works well and can identify trees with a high correction rate. Real data application provides satisfied results. The approach developed in this paper can serve as the basis for reconstructing phylogenies of more than four genomes.
Space weather Preparing for the Maximum of the Solar Cycle
Shaltout, Mosalam
: Space Environments Group preparing for the maximum of the solar cycle 24 where the current plan envisage that the National second Earth Research satellite EgyptSat2 will be launched in 2012. For that, forecasting the solar activity at 2012 is very important. The plan depend on the long-term prediction by using 10.7cm of Ottawa data (1947-2008) and applying fast Fourier transform FFT on this time series. Also, Using the Artificial Intelligence to predict the maximum activity by Fuzzy modeling. Also, Short-term prediction for Coronal mass ejection CMEs by the artificial satellite STEREO observations, beside other satellites as SOHO, Hinde, SDO, Solar orbiter sentinels, Solar Probe in collaboration with Paris Observatory in Meudon, France.
Trachte, U.; Wellig, B.; Luethi, E.; Gander, T.; Haerri, V.
2010-06-15
The Lucerne University of Applied Sciences and Arts - Lucerne School of Engineering and Architecture conducted field tests with an uninterruptible power supply (UPS) with fuel cell technology since January 2006. The project took place in collaboration with the industrial partners Swisscom (Schweiz) AG, as a user of UPS-systems in telecommunications and the American Power Conversion Corporation as a producer and market leader of UPS-Systems. In this project, the lead-acid batteries were replaced by a PEM fuel cell system. The delayed start-up behaviour of the fuel cell was bridged with supercapacitor technology. The system was connected to an existing working base station of a telecommunication installation, which was installed on the roof of the Lucerne School of Engineering and Architecture in Horw. Hydrogen was provided by two pressurized tanks. The full quantity of hydrogen assured a stand-alone operation for about 6 hours under the load of the telecommunication base station. The field test included monthly grid failure simulations of 5x5 minutes and 2x20 minutes power failures. Also during grid failure simulations for more than 4 hours and during two real outages up to one and a half hour the system provided the demanded power. The field test was performed for a period of three and a half years. Excellent results of the approximately 350 start-up's confirm the functionality, reliability and performance of the system. Under the load of the base station the fuel cell system started with a reliability of 100%. At the end of the tests a decrease of the fuel cell voltage of about 3.3% was measured. The fuel cell system was still fully operational at this time. An amount of energy of about 470 kWh was provided. In addition to the field test, the environmental impact of the lead-acid batteries, which are normally used, and of the fuel cell system was investigated. The comparison between the fuel cell system and lead-acid batteries without recycling showed a
Maximum power operation of interacting molecular motors
Golubeva, Natalia; Imparato, Alberto
2013-01-01
We study the mechanical and thermodynamic properties of different traffic models for kinesin which are relevant in biological and experimental contexts. We find that motor-motor interactions play a fundamental role by enhancing the thermodynamic efficiency at maximum power of the motors......, as compared to the non-interacting system, in a wide range of biologically compatible scenarios. We furthermore consider the case where the motor-motor interaction directly affects the internal chemical cycle and investigate the effect on the system dynamics and thermodynamics....
Maximum a posteriori decoder for digital communications
Altes, Richard A. (Inventor)
1997-01-01
A system and method for decoding by identification of the most likely phase coded signal corresponding to received data. The present invention has particular application to communication with signals that experience spurious random phase perturbations. The generalized estimator-correlator uses a maximum a posteriori (MAP) estimator to generate phase estimates for correlation with incoming data samples and for correlation with mean phases indicative of unique hypothesized signals. The result is a MAP likelihood statistic for each hypothesized transmission, wherein the highest value statistic identifies the transmitted signal.
Kernel-based Maximum Entropy Clustering
JIANG Wei; QU Jiao; LI Benxi
2007-01-01
With the development of Support Vector Machine (SVM),the "kernel method" has been studied in a general way.In this paper,we present a novel Kernel-based Maximum Entropy Clustering algorithm (KMEC).By using mercer kernel functions,the proposed algorithm is firstly map the data from their original space to high dimensional space where the data are expected to be more separable,then perform MEC clustering in the feature space.The experimental results show that the proposed method has better performance in the non-hyperspherical and complex data structure.
Maximum entropy signal restoration with linear programming
Mastin, G.A.; Hanson, R.J.
1988-05-01
Dantzig's bounded-variable method is used to express the maximum entropy restoration problem as a linear programming problem. This is done by approximating the nonlinear objective function with piecewise linear segments, then bounding the variables as a function of the number of segments used. The use of a linear programming approach allows equality constraints found in the traditional Lagrange multiplier method to be relaxed. A robust revised simplex algorithm is used to implement the restoration. Experimental results from 128- and 512-point signal restorations are presented.
COMPARISON BETWEEN FORMULAS OF MAXIMUM SHIP SQUAT
PETRU SERGIU SERBAN
2016-06-01
Full Text Available Ship squat is a combined effect of ship’s draft and trim increase due to ship motion in limited navigation conditions. Over time, researchers conducted tests on models and ships to find a mathematical formula that can define squat. Various forms of calculating squat can be found in the literature. Among those most commonly used are of Barrass, Millward, Eryuzlu or ICORELS. This paper presents a comparison between the squat formulas to see the differences between them and which one provides the most satisfactory results. In this respect a cargo ship at different speeds was considered as a model for maximum squat calculations in canal navigation conditions.
Multi-Channel Maximum Likelihood Pitch Estimation
Christensen, Mads Græsbøll
2012-01-01
In this paper, a method for multi-channel pitch estimation is proposed. The method is a maximum likelihood estimator and is based on a parametric model where the signals in the various channels share the same fundamental frequency but can have different amplitudes, phases, and noise characteristics....... This essentially means that the model allows for different conditions in the various channels, like different signal-to-noise ratios, microphone characteristics and reverberation. Moreover, the method does not assume that a certain array structure is used but rather relies on a more general model and is hence...
Maximum entropy PDF projection: A review
Baggenstoss, Paul M.
2017-06-01
We review maximum entropy (MaxEnt) PDF projection, a method with wide potential applications in statistical inference. The method constructs a sampling distribution for a high-dimensional vector x based on knowing the sampling distribution p(z) of a lower-dimensional feature z = T (x). Under mild conditions, the distribution p(x) having highest possible entropy among all distributions consistent with p(z) may be readily found. Furthermore, the MaxEnt p(x) may be sampled, making the approach useful in Monte Carlo methods. We review the theorem and present a case study in model order selection and classification for handwritten character recognition.
CORA: Emission Line Fitting with Maximum Likelihood
Ness, Jan-Uwe; Wichmann, Rainer
2011-12-01
CORA analyzes emission line spectra with low count numbers and fits them to a line using the maximum likelihood technique. CORA uses a rigorous application of Poisson statistics. From the assumption of Poissonian noise, the software derives the probability for a model of the emission line spectrum to represent the measured spectrum. The likelihood function is used as a criterion for optimizing the parameters of the theoretical spectrum and a fixed point equation is derived allowing an efficient way to obtain line fluxes. CORA has been applied to an X-ray spectrum with the Low Energy Transmission Grating Spectrometer (LETGS) on board the Chandra observatory.
Dynamical maximum entropy approach to flocking
Cavagna, Andrea; Giardina, Irene; Ginelli, Francesco; Mora, Thierry; Piovani, Duccio; Tavarone, Raffaele; Walczak, Aleksandra M.
2014-04-01
We derive a new method to infer from data the out-of-equilibrium alignment dynamics of collectively moving animal groups, by considering the maximum entropy model distribution consistent with temporal and spatial correlations of flight direction. When bird neighborhoods evolve rapidly, this dynamical inference correctly learns the parameters of the model, while a static one relying only on the spatial correlations fails. When neighbors change slowly and the detailed balance is satisfied, we recover the static procedure. We demonstrate the validity of the method on simulated data. The approach is applicable to other systems of active matter.
Maximum Temperature Detection System for Integrated Circuits
Frankiewicz, Maciej; Kos, Andrzej
2015-03-01
The paper describes structure and measurement results of the system detecting present maximum temperature on the surface of an integrated circuit. The system consists of the set of proportional to absolute temperature sensors, temperature processing path and a digital part designed in VHDL. Analogue parts of the circuit where designed with full-custom technique. The system is a part of temperature-controlled oscillator circuit - a power management system based on dynamic frequency scaling method. The oscillator cooperates with microprocessor dedicated for thermal experiments. The whole system is implemented in UMC CMOS 0.18 μm (1.8 V) technology.
Zipf's law and maximum sustainable growth
Malevergne, Y; Sornette, D
2010-01-01
Zipf's law states that the number of firms with size greater than S is inversely proportional to S. Most explanations start with Gibrat's rule of proportional growth but require additional constraints. We show that Gibrat's rule, at all firm levels, yields Zipf's law under a balance condition between the effective growth rate of incumbent firms (which includes their possible demise) and the growth rate of investments in entrant firms. Remarkably, Zipf's law is the signature of the long-term optimal allocation of resources that ensures the maximum sustainable growth rate of an economy.
Accurate structural correlations from maximum likelihood superpositions.
Douglas L Theobald
2008-02-01
Full Text Available The cores of globular proteins are densely packed, resulting in complicated networks of structural interactions. These interactions in turn give rise to dynamic structural correlations over a wide range of time scales. Accurate analysis of these complex correlations is crucial for understanding biomolecular mechanisms and for relating structure to function. Here we report a highly accurate technique for inferring the major modes of structural correlation in macromolecules using likelihood-based statistical analysis of sets of structures. This method is generally applicable to any ensemble of related molecules, including families of nuclear magnetic resonance (NMR models, different crystal forms of a protein, and structural alignments of homologous proteins, as well as molecular dynamics trajectories. Dominant modes of structural correlation are determined using principal components analysis (PCA of the maximum likelihood estimate of the correlation matrix. The correlations we identify are inherently independent of the statistical uncertainty and dynamic heterogeneity associated with the structural coordinates. We additionally present an easily interpretable method ("PCA plots" for displaying these positional correlations by color-coding them onto a macromolecular structure. Maximum likelihood PCA of structural superpositions, and the structural PCA plots that illustrate the results, will facilitate the accurate determination of dynamic structural correlations analyzed in diverse fields of structural biology.
Maximum entropy production and the fluctuation theorem
Dewar, R C [Unite EPHYSE, INRA Centre de Bordeaux-Aquitaine, BP 81, 33883 Villenave d' Ornon Cedex (France)
2005-05-27
Recently the author used an information theoretical formulation of non-equilibrium statistical mechanics (MaxEnt) to derive the fluctuation theorem (FT) concerning the probability of second law violating phase-space paths. A less rigorous argument leading to the variational principle of maximum entropy production (MEP) was also given. Here a more rigorous and general mathematical derivation of MEP from MaxEnt is presented, and the relationship between MEP and the FT is thereby clarified. Specifically, it is shown that the FT allows a general orthogonality property of maximum information entropy to be extended to entropy production itself, from which MEP then follows. The new derivation highlights MEP and the FT as generic properties of MaxEnt probability distributions involving anti-symmetric constraints, independently of any physical interpretation. Physically, MEP applies to the entropy production of those macroscopic fluxes that are free to vary under the imposed constraints, and corresponds to selection of the most probable macroscopic flux configuration. In special cases MaxEnt also leads to various upper bound transport principles. The relationship between MaxEnt and previous theories of irreversible processes due to Onsager, Prigogine and Ziegler is also clarified in the light of these results. (letter to the editor)
Thermodynamic hardness and the maximum hardness principle
Franco-Pérez, Marco; Gázquez, José L.; Ayers, Paul W.; Vela, Alberto
2017-08-01
An alternative definition of hardness (called the thermodynamic hardness) within the grand canonical ensemble formalism is proposed in terms of the partial derivative of the electronic chemical potential with respect to the thermodynamic chemical potential of the reservoir, keeping the temperature and the external potential constant. This temperature dependent definition may be interpreted as a measure of the propensity of a system to go through a charge transfer process when it interacts with other species, and thus it keeps the philosophy of the original definition. When the derivative is expressed in terms of the three-state ensemble model, in the regime of low temperatures and up to temperatures of chemical interest, one finds that for zero fractional charge, the thermodynamic hardness is proportional to T-1(I -A ) , where I is the first ionization potential, A is the electron affinity, and T is the temperature. However, the thermodynamic hardness is nearly zero when the fractional charge is different from zero. Thus, through the present definition, one avoids the presence of the Dirac delta function. We show that the chemical hardness defined in this way provides meaningful and discernible information about the hardness properties of a chemical species exhibiting integer or a fractional average number of electrons, and this analysis allowed us to establish a link between the maximum possible value of the hardness here defined, with the minimum softness principle, showing that both principles are related to minimum fractional charge and maximum stability conditions.
Observing participating observation
Keiding, Tina Bering
2011-01-01
Current methodology concerning participating observation in general leaves the act of observation unobserved. Approaching participating observation from systems theory offers fundamental new insights into the topic. Observation is always participation. There is no way to escape becoming...... as the idea of the naïve observer becomes a void. Not recognizing and observing oneself as observer and co-producer of empirical data simply leaves the process of observation as the major unobserved absorber of contingency in data production based on participating observation....
Observing participating observation
Keiding, Tina Bering
2010-01-01
Current methodology concerning participating observation in general leaves the act of observation unobserved. Approaching participating observation from systems theory offers fundamental new insights into the topic. Observation is always participation. There is no way to escape becoming...... as the idea of the naïve observer becomes a void. Not recognizing and observing oneself as observer and co-producer of empirical data simply leaves the process of observation as the major unobserved absorber of contingency in data production based on participating observation....
The role of pressure anisotropy on the maximum mass of cold compact stars
Karmakar, S.; Mukherjee, S.; Sharma, R.; Maharaj, S.D.
2007-01-01
We study the physical features of a class of exact solutions for cold compact anisotropic stars. The effect of pressure anisotropy on the maximum mass and surface redshift is analysed in the Vaidya-Tikekar model. It is shown that maximum compactness, redshift and mass increase in the presence of anisotropic pressures; numerical values are generated which are in agreement with observation.
New downshifted maximum in stimulated electromagnetic emission spectra
Sergeev, Evgeny; Grach, Savely
A new spectral maximum in spectra of stimulated electromagnetic emission of the ionosphere (SEE, [1]) was detected in experiments at the SURA facility in 2008 for the pump frequencies f0 4.4-4.5 MHz, most stably for f0 = 4.3 MHz, the lowest possible pump frequency at the SURA facility. The new maximum is situated at frequency shifts ∆f -6 kHz from the pump wave frequency f0 , ∆f = fSEE - f0 , somewhat closer to the f0 than the well known [2,3] Downshifted Maximum in the SEE spectrum at ∆f -9 kHz. The detection and detailed study of the new feature (which we tentatively called the New Downshifted Maximum, NDM) became possible due to high frequency resolution in spectral analysis. The following properties of the NDM are established. (i) The NDM appears in the SEE spectra simultaneously with the DM and UM features after the pump turn on (recall that the less intensive Upshifted Maximum, UM, is situated at ∆f +(6-8) kHz [2,3]). The NDM can't be attributed to 1 DM [4] or Narrow Continuum Maximum (NCM, 2 [5]) SEE features, as well as to splitted DM near gyroharmonics [2]. (ii) The NDM is observed as prominent feature for maximum pump power of the SURA facility P ≈ 120 MW ERP, for which the DM is almost covered by the Broad Continuum SEE feature [2,3]. For P ˜ 30-60 MW ERP the DM and NDM have comparable intensities. For the lesser pump power the DM prevails in the SEE spectrum, while the NDM becomes invisible being covered by the thermal Narrow Continuum feature [2]. (iii) The NDM is exactly symmetrical for the UM relatively to f0 when the former one is observed, although the UM frequency offset increases up to ∆fUM ≈ +9 kHz with a decrease of the pump power up to P ≈ 4 MW ERP. The DM formation in the SEE spectrum is attributed to a three-wave interaction between the upper and lower hybrid waves in the ionosphere, and the lower hybrid frequency ( 7 kHz) determines the frequency offset of the DM high frequency flank [2,6]. The detection of the NDM with
Effective soil hydraulic conductivity predicted with the maximum power principle
Westhoff, Martijn; Erpicum, Sébastien; Archambeau, Pierre; Pirotton, Michel; Zehe, Erwin; Dewals, Benjamin
2016-04-01
Drainage of water in soils happens for a large extent through preferential flowpaths, but these subsurface flowpaths are extremely difficult to observe or parameterize in hydrological models. To potentially overcome this problem, thermodynamic optimality principles have been suggested to predict effective parametrization of these (sub-grid) structures, such as the maximum entropy production principle or the equivalent maximum power principle. These principles have been successfully applied to predict heat transfer from the Equator to the Poles, or turbulent heat fluxes between the surface and the atmosphere. In these examples, the effective flux adapts itself to its boundary condition by adapting its effective conductance through the creation of e.g. convection cells. However, flow through porous media, such as soils, can only quickly adapt its effective flow conductance by creation of preferential flowpaths, but it is unknown if this is guided by the aim to create maximum power. Here we show experimentally that this is indeed the case: In the lab, we created a hydrological analogue to the atmospheric model dealing with heat transport between Equator and poles. The experimental setup consists of two freely draining reservoirs connected with each other by a confined aquifer. By adding water to only one reservoir, a potential difference will build up until a steady state is reached. From the steady state potential difference and the observed flow through the aquifer, and effective hydraulic conductance can be determined. This observed conductance does correspond to the one maximizing power of the flux through the confined aquifer. Although this experiment is done in an idealized setting, it opens doors for better parameterizing hydrological models. Furthermore, it shows that hydraulic properties of soils are not static, but they change with changing boundary conditions. A potential limitation to the principle is that it only applies to steady state conditions
Lake Basin Fetch and Maximum Length/Width
Minnesota Department of Natural Resources — Linear features representing the Fetch, Maximum Length and Maximum Width of a lake basin. Fetch, maximum length and average width are calcuated from the lake polygon...
Observing participating observation
Keiding, Tina Bering
2011-01-01
Current methodology concerning participating observation in general leaves the act of observation unobserved. Approaching participating observation from systems theory offers fundamental new insights into the topic. Observation is always participation. There is no way to escape becoming...... a participant and, as such, co-producer of the observed phenomenon. There is no such thing as a neutral or objective description. As observation deals with differences and process meaning, all descriptions are reconstructions and interpretations of the observed. Hence, the idea of neutral descriptions as well...... as the idea of the naïve observer becomes a void. Not recognizing and observing oneself as observer and co-producer of empirical data simply leaves the process of observation as the major unobserved absorber of contingency in data production based on participating observation....
Observing participating observation
Keiding, Tina Bering
2010-01-01
Current methodology concerning participating observation in general leaves the act of observation unobserved. Approaching participating observation from systems theory offers fundamental new insights into the topic. Observation is always participation. There is no way to escape becoming...... a participant and, as such, co-producer of the observed phenomenon. There is no such thing as a neutral or objective description. As observation deals with differences and process meaning, all descriptions are re-constructions and interpretations of the observed. Hence, the idea of neutral descriptions as well...... as the idea of the naïve observer becomes a void. Not recognizing and observing oneself as observer and co-producer of empirical data simply leaves the process of observation as the major unobserved absorber of contingency in data production based on participating observation....
Maximum likelihood Jukes-Cantor triplets: analytic solutions.
Chor, Benny; Hendy, Michael D; Snir, Sagi
2006-03-01
Maximum likelihood (ML) is a popular method for inferring a phylogenetic tree of the evolutionary relationship of a set of taxa, from observed homologous aligned genetic sequences of the taxa. Generally, the computation of the ML tree is based on numerical methods, which in a few cases, are known to converge to a local maximum on a tree, which is suboptimal. The extent of this problem is unknown, one approach is to attempt to derive algebraic equations for the likelihood equation and find the maximum points analytically. This approach has so far only been successful in the very simplest cases, of three or four taxa under the Neyman model of evolution of two-state characters. In this paper we extend this approach, for the first time, to four-state characters, the Jukes-Cantor model under a molecular clock, on a tree T on three taxa, a rooted triple. We employ spectral methods (Hadamard conjugation) to express the likelihood function parameterized by the path-length spectrum. Taking partial derivatives, we derive a set of polynomial equations whose simultaneous solution contains all critical points of the likelihood function. Using tools of algebraic geometry (the resultant of two polynomials) in the computer algebra packages (Maple), we are able to find all turning points analytically. We then employ this method on real sequence data and obtain realistic results on the primate-rodents divergence time.
An improved maximum power point tracking method for photovoltaic systems
Tafticht, T.; Agbossou, K.; Doumbia, M.L.; Cheriti, A. [Institut de recherche sur l' hydrogene, Departement de genie electrique et genie informatique, Universite du Quebec a Trois-Rivieres, C.P. 500, Trois-Rivieres (QC) (Canada)
2008-07-15
In most of the maximum power point tracking (MPPT) methods described currently in the literature, the optimal operation point of the photovoltaic (PV) systems is estimated by linear approximations. However these approximations can lead to less than optimal operating conditions and hence reduce considerably the performances of the PV system. This paper proposes a new approach to determine the maximum power point (MPP) based on measurements of the open-circuit voltage of the PV modules, and a nonlinear expression for the optimal operating voltage is developed based on this open-circuit voltage. The approach is thus a combination of the nonlinear and perturbation and observation (P and O) methods. The experimental results show that the approach improves clearly the tracking efficiency of the maximum power available at the output of the PV modules. The new method reduces the oscillations around the MPP, and increases the average efficiency of the MPPT obtained. The new MPPT method will deliver more power to any generic load or energy storage media. (author)
MB Distribution and its application using maximum entropy approach
Bhadra Suman
2016-01-01
Full Text Available Maxwell Boltzmann distribution with maximum entropy approach has been used to study the variation of political temperature and heat in a locality. We have observed that the political temperature rises without generating any political heat when political parties increase their attractiveness by intense publicity, but voters do not shift their loyalties. It has also been shown that political heat is generated and political entropy increases with political temperature remaining constant when parties do not change their attractiveness, but voters shift their loyalties (to more attractive parties.
Efficient maximum likelihood parameterization of continuous-time Markov processes
McGibbon, Robert T
2015-01-01
Continuous-time Markov processes over finite state-spaces are widely used to model dynamical processes in many fields of natural and social science. Here, we introduce an maximum likelihood estimator for constructing such models from data observed at a finite time interval. This estimator is drastically more efficient than prior approaches, enables the calculation of deterministic confidence intervals in all model parameters, and can easily enforce important physical constraints on the models such as detailed balance. We demonstrate and discuss the advantages of these models over existing discrete-time Markov models for the analysis of molecular dynamics simulations.
Direct maximum parsimony phylogeny reconstruction from genotype data
Ravi R
2007-12-01
Full Text Available Abstract Background Maximum parsimony phylogenetic tree reconstruction from genetic variation data is a fundamental problem in computational genetics with many practical applications in population genetics, whole genome analysis, and the search for genetic predictors of disease. Efficient methods are available for reconstruction of maximum parsimony trees from haplotype data, but such data are difficult to determine directly for autosomal DNA. Data more commonly is available in the form of genotypes, which consist of conflated combinations of pairs of haplotypes from homologous chromosomes. Currently, there are no general algorithms for the direct reconstruction of maximum parsimony phylogenies from genotype data. Hence phylogenetic applications for autosomal data must therefore rely on other methods for first computationally inferring haplotypes from genotypes. Results In this work, we develop the first practical method for computing maximum parsimony phylogenies directly from genotype data. We show that the standard practice of first inferring haplotypes from genotypes and then reconstructing a phylogeny on the haplotypes often substantially overestimates phylogeny size. As an immediate application, our method can be used to determine the minimum number of mutations required to explain a given set of observed genotypes. Conclusion Phylogeny reconstruction directly from unphased data is computationally feasible for moderate-sized problem instances and can lead to substantially more accurate tree size inferences than the standard practice of treating phasing and phylogeny construction as two separate analysis stages. The difference between the approaches is particularly important for downstream applications that require a lower-bound on the number of mutations that the genetic region has undergone.
Maximum entropy principle and texture formation
Arminjon, M; Arminjon, Mayeul; Imbault, Didier
2006-01-01
The macro-to-micro transition in a heterogeneous material is envisaged as the selection of a probability distribution by the Principle of Maximum Entropy (MAXENT). The material is made of constituents, e.g. given crystal orientations. Each constituent is itself made of a large number of elementary constituents. The relevant probability is the volume fraction of the elementary constituents that belong to a given constituent and undergo a given stimulus. Assuming only obvious constraints in MAXENT means describing a maximally disordered material. This is proved to have the same average stimulus in each constituent. By adding a constraint in MAXENT, a new model, potentially interesting e.g. for texture prediction, is obtained.
Maximum Profit Configurations of Commercial Engines
Yiran Chen
2011-06-01
Full Text Available An investigation of commercial engines with finite capacity low- and high-price economic subsystems and a generalized commodity transfer law [n ∝ Δ (P m] in commodity flow processes, in which effects of the price elasticities of supply and demand are introduced, is presented in this paper. Optimal cycle configurations of commercial engines for maximum profit are obtained by applying optimal control theory. In some special cases, the eventual state—market equilibrium—is solely determined by the initial conditions and the inherent characteristics of two subsystems; while the different ways of transfer affect the model in respects of the specific forms of the paths of prices and the instantaneous commodity flow, i.e., the optimal configuration.
Maximum Segment Sum, Monadically (distilled tutorial
Jeremy Gibbons
2011-09-01
Full Text Available The maximum segment sum problem is to compute, given a list of integers, the largest of the sums of the contiguous segments of that list. This problem specification maps directly onto a cubic-time algorithm; however, there is a very elegant linear-time solution too. The problem is a classic exercise in the mathematics of program construction, illustrating important principles such as calculational development, pointfree reasoning, algebraic structure, and datatype-genericity. Here, we take a sideways look at the datatype-generic version of the problem in terms of monadic functional programming, instead of the traditional relational approach; the presentation is tutorial in style, and leavened with exercises for the reader.
Maximum Information and Quantum Prediction Algorithms
McElwaine, J N
1997-01-01
This paper describes an algorithm for selecting a consistent set within the consistent histories approach to quantum mechanics and investigates its properties. The algorithm uses a maximum information principle to select from among the consistent sets formed by projections defined by the Schmidt decomposition. The algorithm unconditionally predicts the possible events in closed quantum systems and ascribes probabilities to these events. A simple spin model is described and a complete classification of all exactly consistent sets of histories formed from Schmidt projections in the model is proved. This result is used to show that for this example the algorithm selects a physically realistic set. Other tentative suggestions in the literature for set selection algorithms using ideas from information theory are discussed.
Maximum process problems in optimal control theory
Goran Peskir
2005-01-01
Full Text Available Given a standard Brownian motion (Btt≥0 and the equation of motion dXt=vtdt+2dBt, we set St=max0≤s≤tXs and consider the optimal control problem supvE(Sτ−Cτ, where c>0 and the supremum is taken over all admissible controls v satisfying vt∈[μ0,μ1] for all t up to τ=inf{t>0|Xt∉(ℓ0,ℓ1} with μ0g∗(St, where s↦g∗(s is a switching curve that is determined explicitly (as the unique solution to a nonlinear differential equation. The solution found demonstrates that the problem formulations based on a maximum functional can be successfully included in optimal control theory (calculus of variations in addition to the classic problem formulations due to Lagrange, Mayer, and Bolza.
Maximum Spectral Luminous Efficacy of White Light
Murphy, T W
2013-01-01
As lighting efficiency improves, it is useful to understand the theoretical limits to luminous efficacy for light that we perceive as white. Independent of the efficiency with which photons are generated, there exists a spectrally-imposed limit to the luminous efficacy of any source of photons. We find that, depending on the acceptable bandpass and---to a lesser extent---the color temperature of the light, the ideal white light source achieves a spectral luminous efficacy of 250--370 lm/W. This is consistent with previous calculations, but here we explore the maximum luminous efficacy as a function of photopic sensitivity threshold, color temperature, and color rendering index; deriving peak performance as a function of all three parameters. We also present example experimental spectra from a variety of light sources, quantifying the intrinsic efficacy of their spectral distributions.
Maximum entropy model for business cycle synchronization
Xi, Ning; Muneepeerakul, Rachata; Azaele, Sandro; Wang, Yougui
2014-11-01
The global economy is a complex dynamical system, whose cyclical fluctuations can mainly be characterized by simultaneous recessions or expansions of major economies. Thus, the researches on the synchronization phenomenon are key to understanding and controlling the dynamics of the global economy. Based on a pairwise maximum entropy model, we analyze the business cycle synchronization of the G7 economic system. We obtain a pairwise-interaction network, which exhibits certain clustering structure and accounts for 45% of the entire structure of the interactions within the G7 system. We also find that the pairwise interactions become increasingly inadequate in capturing the synchronization as the size of economic system grows. Thus, higher-order interactions must be taken into account when investigating behaviors of large economic systems.
Quantum gravity momentum representation and maximum energy
Moffat, J. W.
2016-11-01
We use the idea of the symmetry between the spacetime coordinates xμ and the energy-momentum pμ in quantum theory to construct a momentum space quantum gravity geometry with a metric sμν and a curvature tensor Pλ μνρ. For a closed maximally symmetric momentum space with a constant 3-curvature, the volume of the p-space admits a cutoff with an invariant maximum momentum a. A Wheeler-DeWitt-type wave equation is obtained in the momentum space representation. The vacuum energy density and the self-energy of a charged particle are shown to be finite, and modifications of the electromagnetic radiation density and the entropy density of a system of particles occur for high frequencies.
Video segmentation using Maximum Entropy Model
QIN Li-juan; ZHUANG Yue-ting; PAN Yun-he; WU Fei
2005-01-01
Detecting objects of interest from a video sequence is a fundamental and critical task in automated visual surveillance.Most current approaches only focus on discriminating moving objects by background subtraction whether or not the objects of interest can be moving or stationary. In this paper, we propose layers segmentation to detect both moving and stationary target objects from surveillance video. We extend the Maximum Entropy (ME) statistical model to segment layers with features, which are collected by constructing a codebook with a set of codewords for each pixel. We also indicate how the training models are used for the discrimination of target objects in surveillance video. Our experimental results are presented in terms of the success rate and the segmenting precision.
Mroczka Janusz
2014-12-01
Full Text Available Photovoltaic panels have a non-linear current-voltage characteristics to produce the maximum power at only one point called the maximum power point. In the case of the uniform illumination a single solar panel shows only one maximum power, which is also the global maximum power point. In the case an irregularly illuminated photovoltaic panel many local maxima on the power-voltage curve can be observed and only one of them is the global maximum. The proposed algorithm detects whether a solar panel is in the uniform insolation conditions. Then an appropriate strategy of tracking the maximum power point is taken using a decision algorithm. The proposed method is simulated in the environment created by the authors, which allows to stimulate photovoltaic panels in real conditions of lighting, temperature and shading.
Maximum likelihood estimation for social network dynamics
Snijders, T.A.B.; Koskinen, J.; Schweinberger, M.
2010-01-01
A model for network panel data is discussed, based on the assumption that the observed data are discrete observations of a continuous-time Markov process on the space of all directed graphs on a given node set, in which changes in tie variables are independent conditional on the current graph. The m
Evaluation of pliers' grip spans in the maximum gripping task and sub-maximum cutting task.
Kim, Dae-Min; Kong, Yong-Ku
2016-12-01
A total of 25 males participated to investigate the effects of the grip spans of pliers on the total grip force, individual finger forces and muscle activities in the maximum gripping task and wire-cutting tasks. In the maximum gripping task, results showed that the 50-mm grip span had significantly higher total grip strength than the other grip spans. In the cutting task, the 50-mm grip span also showed significantly higher grip strength than the 65-mm and 80-mm grip spans, whereas the muscle activities showed a higher value at 80-mm grip span. The ratios of cutting force to maximum grip strength were also investigated. Ratios of 30.3%, 31.3% and 41.3% were obtained by grip spans of 50-mm, 65-mm, and 80-mm, respectively. Thus, the 50-mm grip span for pliers might be recommended to provide maximum exertion in gripping tasks, as well as lower maximum-cutting force ratios in the cutting tasks.
Cosmic shear measurement with maximum likelihood and maximum a posteriori inference
Hall, Alex
2016-01-01
We investigate the problem of noise bias in maximum likelihood and maximum a posteriori estimators for cosmic shear. We derive the leading and next-to-leading order biases and compute them in the context of galaxy ellipticity measurements, extending previous work on maximum likelihood inference for weak lensing. We show that a large part of the bias on these point estimators can be removed using information already contained in the likelihood when a galaxy model is specified, without the need for external calibration. We test these bias-corrected estimators on simulated galaxy images similar to those expected from planned space-based weak lensing surveys, with very promising results. We find that the introduction of an intrinsic shape prior mitigates noise bias, such that the maximum a posteriori estimate can be made less biased than the maximum likelihood estimate. Second-order terms offer a check on the convergence of the estimators, but are largely sub-dominant. We show how biases propagate to shear estima...
A new solar signal: Average maximum sunspot magnetic fields independent of activity cycle
Livingston, William
2016-01-01
Over the past five years, 2010-2015, we have observed, in the near infrared (IR), the maximum magnetic field strengths for 4145 sunspot umbrae. Herein we distinguish field strengths from field flux. (Most solar magnetographs measure flux). Maximum field strength in umbrae is co-spatial with the position of umbral minimum brightness (Norton and Gilman, 2004). We measure field strength by the Zeeman splitting of the Fe 15648.5 A spectral line. We show that in the IR no cycle dependence on average maximum field strength (2050 G) has been found +/- 20 Gauss. A similar analysis of 17,450 spots observed by the Helioseismic and Magnetic Imager onboard the Solar Dynamics Observatory reveal the same cycle independence +/- 0.18 G., or a variance of 0.01%. This is found not to change over the ongoing 2010-2015 minimum to maximum cycle. Conclude the average maximum umbral fields on the Sun are constant with time.
Maximum Entropy Estimation of n-Year Extreme Waveheights
徐德伦; 张军; 郑桂珍
2004-01-01
A new method for estimating the n (50 or 100) -year return-period waveheight, namely, the extreme waveheightexpected to occur in n years, is presented on the basis of the maximum entropy principle. The main points of the method are as follows: ( 1 ) based on the Hamiltonian principle, a maximum entropy probability density function for the extreme waveheight H, f(H)= αHγe-βΗ4 is derived from a Lagrangian function subject to some necessary and rational constraints; (2) the parametersα,β, andγin the function are expressed in terms of the mean H, variance V = ( H - H)2and bias B = ( H- H)3; and (3) with H, V and B estimated from observed data, the n-year return-period wave height Hn is computed in accordance with the formula 1/1 - F(Hn) = n, where F(Hn) is defined as F(Hn) =n Hn Of(H)dH.Examples of estimating the 50 and 100-year retum period waveheights by the present method and by some currently used method from observed data acquired from two hydrographic stations are given. A comparison of the estimated results shows that the present method is superior to the others.
Application of Maximum Entropy Deconvolution to ${\\gamma}$-ray Skymaps
Raab, Susanne
2015-01-01
Skymaps measured with imaging atmospheric Cherenkov telescopes (IACTs) represent the real source distribution convolved with the point spread function of the observing instrument. Current IACTs have an angular resolution in the order of 0.1$^\\circ$ which is rather large for the study of morphological structures and for comparing the morphology in $\\gamma$-rays to measurements in other wavelengths where the instruments have better angular resolutions. Serendipitously it is possible to approximate the underlying true source distribution by applying a deconvolution algorithm to the observed skymap, thus effectively improving the instruments angular resolution. From the multitude of existing deconvolution algorithms several are already used in astronomy, but in the special case of $\\gamma$-ray astronomy most of these algorithms are challenged due to the high noise level within the measured data. One promising algorithm for the application to $\\gamma$-ray data is the Maximum Entropy Algorithm. The advantages of th...
Maximum Entropy Production and Non-Gaussian Climate Variability
Sura, Philip
2016-01-01
Earth's atmosphere is in a state far from thermodynamic equilibrium. For example, the large scale equator-to-pole temperature gradient is maintained by tropical heating, polar cooling, and a midlatitude meridional eddy heat flux predominantly driven by baroclinically unstable weather systems. Based on basic thermodynamic principles, it can be shown that the meridional heat flux, in combination with the meridional temperature gradient, acts to maximize entropy production of the atmosphere. In fact, maximum entropy production (MEP) has been successfully used to explain the observed mean state of the atmosphere and other components of the climate system. However, one important feature of the large scale atmospheric circulation is its often non-Gaussian variability about the mean. This paper presents theoretical and observational evidence that some processes in the midlatitude atmosphere are significantly non-Gaussian to maximize entropy production. First, after introducing the basic theory, it is shown that the ...
Analytical maximum likelihood estimation of stellar magnetic fields
González, M J Martínez; Ramos, A Asensio; Belluzzi, L
2011-01-01
The polarised spectrum of stellar radiation encodes valuable information on the conditions of stellar atmospheres and the magnetic fields that permeate them. In this paper, we give explicit expressions to estimate the magnetic field vector and its associated error from the observed Stokes parameters. We study the solar case where specific intensities are observed and then the stellar case, where we receive the polarised flux. In this second case, we concentrate on the explicit expression for the case of a slow rotator with a dipolar magnetic field geometry. Moreover, we also give explicit formulae to retrieve the magnetic field vector from the LSD profiles without assuming mean values for the LSD artificial spectral line. The formulae have been obtained assuming that the spectral lines can be described in the weak field regime and using a maximum likelihood approach. The errors are recovered by means of the hermitian matrix. The bias of the estimators are analysed in depth.
20 CFR 211.14 - Maximum creditable compensation.
2010-04-01
... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Maximum creditable compensation. 211.14... CREDITABLE RAILROAD COMPENSATION § 211.14 Maximum creditable compensation. Maximum creditable compensation... Employment Accounts shall notify each employer of the amount of maximum creditable compensation applicable...
49 CFR 230.24 - Maximum allowable stress.
2010-10-01
... 49 Transportation 4 2010-10-01 2010-10-01 false Maximum allowable stress. 230.24 Section 230.24... Allowable Stress § 230.24 Maximum allowable stress. (a) Maximum allowable stress value. The maximum allowable stress value on any component of a steam locomotive boiler shall not exceed 1/4 of the ultimate...
Theoretical Estimate of Maximum Possible Nuclear Explosion
Bethe, H. A.
1950-01-31
The maximum nuclear accident which could occur in a Na-cooled, Be moderated, Pu and power producing reactor is estimated theoretically. (T.R.H.) 2O82 Results of nuclear calculations for a variety of compositions of fast, heterogeneous, sodium-cooled, U-235-fueled, plutonium- and power-producing reactors are reported. Core compositions typical of plate-, pin-, or wire-type fuel elements and with uranium as metal, alloy, and oxide were considered. These compositions included atom ratios in the following range: U-23B to U-235 from 2 to 8; sodium to U-235 from 1.5 to 12; iron to U-235 from 5 to 18; and vanadium to U-235 from 11 to 33. Calculations were performed to determine the effect of lead and iron reflectors between the core and blanket. Both natural and depleted uranium were evaluated as the blanket fertile material. Reactors were compared on a basis of conversion ratio, specific power, and the product of both. The calculated results are in general agreement with the experimental results from fast reactor assemblies. An analysis of the effect of new cross-section values as they became available is included. (auth)
Proposed principles of maximum local entropy production.
Ross, John; Corlan, Alexandru D; Müller, Stefan C
2012-07-12
Articles have appeared that rely on the application of some form of "maximum local entropy production principle" (MEPP). This is usually an optimization principle that is supposed to compensate for the lack of structural information and measurements about complex systems, even systems as complex and as little characterized as the whole biosphere or the atmosphere of the Earth or even of less known bodies in the solar system. We select a number of claims from a few well-known papers that advocate this principle and we show that they are in error with the help of simple examples of well-known chemical and physical systems. These erroneous interpretations can be attributed to ignoring well-established and verified theoretical results such as (1) entropy does not necessarily increase in nonisolated systems, such as "local" subsystems; (2) macroscopic systems, as described by classical physics, are in general intrinsically deterministic-there are no "choices" in their evolution to be selected by using supplementary principles; (3) macroscopic deterministic systems are predictable to the extent to which their state and structure is sufficiently well-known; usually they are not sufficiently known, and probabilistic methods need to be employed for their prediction; and (4) there is no causal relationship between the thermodynamic constraints and the kinetics of reaction systems. In conclusion, any predictions based on MEPP-like principles should not be considered scientifically founded.
Maximum entropy production and plant optimization theories.
Dewar, Roderick C
2010-05-12
Plant ecologists have proposed a variety of optimization theories to explain the adaptive behaviour and evolution of plants from the perspective of natural selection ('survival of the fittest'). Optimization theories identify some objective function--such as shoot or canopy photosynthesis, or growth rate--which is maximized with respect to one or more plant functional traits. However, the link between these objective functions and individual plant fitness is seldom quantified and there remains some uncertainty about the most appropriate choice of objective function to use. Here, plants are viewed from an alternative thermodynamic perspective, as members of a wider class of non-equilibrium systems for which maximum entropy production (MEP) has been proposed as a common theoretical principle. I show how MEP unifies different plant optimization theories that have been proposed previously on the basis of ad hoc measures of individual fitness--the different objective functions of these theories emerge as examples of entropy production on different spatio-temporal scales. The proposed statistical explanation of MEP, that states of MEP are by far the most probable ones, suggests a new and extended paradigm for biological evolution--'survival of the likeliest'--which applies from biomacromolecules to ecosystems, not just to individuals.
Maximum likelihood continuity mapping for fraud detection
Hogden, J.
1997-05-01
The author describes a novel time-series analysis technique called maximum likelihood continuity mapping (MALCOM), and focuses on one application of MALCOM: detecting fraud in medical insurance claims. Given a training data set composed of typical sequences, MALCOM creates a stochastic model of sequence generation, called a continuity map (CM). A CM maximizes the probability of sequences in the training set given the model constraints, CMs can be used to estimate the likelihood of sequences not found in the training set, enabling anomaly detection and sequence prediction--important aspects of data mining. Since MALCOM can be used on sequences of categorical data (e.g., sequences of words) as well as real valued data, MALCOM is also a potential replacement for database search tools such as N-gram analysis. In a recent experiment, MALCOM was used to evaluate the likelihood of patient medical histories, where ``medical history`` is used to mean the sequence of medical procedures performed on a patient. Physicians whose patients had anomalous medical histories (according to MALCOM) were evaluated for fraud by an independent agency. Of the small sample (12 physicians) that has been evaluated, 92% have been determined fraudulent or abusive. Despite the small sample, these results are encouraging.
Maximum life spiral bevel reduction design
Savage, M.; Prasanna, M. G.; Coe, H. H.
1992-07-01
Optimization is applied to the design of a spiral bevel gear reduction for maximum life at a given size. A modified feasible directions search algorithm permits a wide variety of inequality constraints and exact design requirements to be met with low sensitivity to initial values. Gear tooth bending strength and minimum contact ratio under load are included in the active constraints. The optimal design of the spiral bevel gear reduction includes the selection of bearing and shaft proportions in addition to gear mesh parameters. System life is maximized subject to a fixed back-cone distance of the spiral bevel gear set for a specified speed ratio, shaft angle, input torque, and power. Significant parameters in the design are: the spiral angle, the pressure angle, the numbers of teeth on the pinion and gear, and the location and size of the four support bearings. Interpolated polynomials expand the discrete bearing properties and proportions into continuous variables for gradient optimization. After finding the continuous optimum, a designer can analyze near optimal designs for comparison and selection. Design examples show the influence of the bearing lives on the gear parameters in the optimal configurations. For a fixed back-cone distance, optimal designs with larger shaft angles have larger service lives.
CORA - emission line fitting with Maximum Likelihood
Ness, J.-U.; Wichmann, R.
2002-07-01
The advent of pipeline-processed data both from space- and ground-based observatories often disposes of the need of full-fledged data reduction software with its associated steep learning curve. In many cases, a simple tool doing just one task, and doing it right, is all one wishes. In this spirit we introduce CORA, a line fitting tool based on the maximum likelihood technique, which has been developed for the analysis of emission line spectra with low count numbers and has successfully been used in several publications. CORA uses a rigorous application of Poisson statistics. From the assumption of Poissonian noise we derive the probability for a model of the emission line spectrum to represent the measured spectrum. The likelihood function is used as a criterion for optimizing the parameters of the theoretical spectrum and a fixed point equation is derived allowing an efficient way to obtain line fluxes. As an example we demonstrate the functionality of the program with an X-ray spectrum of Capella obtained with the Low Energy Transmission Grating Spectrometer (LETGS) on board the Chandra observatory and choose the analysis of the Ne IX triplet around 13.5 Å.
Finding maximum JPEG image block code size
Lakhani, Gopal
2012-07-01
We present a study of JPEG baseline coding. It aims to determine the minimum storage needed to buffer the JPEG Huffman code bits of 8-bit image blocks. Since DC is coded separately, and the encoder represents each AC coefficient by a pair of run-length/AC coefficient level, the net problem is to perform an efficient search for the optimal run-level pair sequence. We formulate it as a two-dimensional, nonlinear, integer programming problem and solve it using a branch-and-bound based search method. We derive two types of constraints to prune the search space. The first one is given as an upper-bound for the sum of squares of AC coefficients of a block, and it is used to discard sequences that cannot represent valid DCT blocks. The second type constraints are based on some interesting properties of the Huffman code table, and these are used to prune sequences that cannot be part of optimal solutions. Our main result is that if the default JPEG compression setting is used, space of minimum of 346 bits and maximum of 433 bits is sufficient to buffer the AC code bits of 8-bit image blocks. Our implementation also pruned the search space extremely well; the first constraint reduced the initial search space of 4 nodes down to less than 2 nodes, and the second set of constraints reduced it further by 97.8%.
Maximum likelihood estimates of pairwise rearrangement distances.
Serdoz, Stuart; Egri-Nagy, Attila; Sumner, Jeremy; Holland, Barbara R; Jarvis, Peter D; Tanaka, Mark M; Francis, Andrew R
2017-06-21
Accurate estimation of evolutionary distances between taxa is important for many phylogenetic reconstruction methods. Distances can be estimated using a range of different evolutionary models, from single nucleotide polymorphisms to large-scale genome rearrangements. Corresponding corrections for genome rearrangement distances fall into 3 categories: Empirical computational studies, Bayesian/MCMC approaches, and combinatorial approaches. Here, we introduce a maximum likelihood estimator for the inversion distance between a pair of genomes, using a group-theoretic approach to modelling inversions introduced recently. This MLE functions as a corrected distance: in particular, we show that because of the way sequences of inversions interact with each other, it is quite possible for minimal distance and MLE distance to differently order the distances of two genomes from a third. The second aspect tackles the problem of accounting for the symmetries of circular arrangements. While, generally, a frame of reference is locked, and all computation made accordingly, this work incorporates the action of the dihedral group so that distance estimates are free from any a priori frame of reference. The philosophy of accounting for symmetries can be applied to any existing correction method, for which examples are offered. Copyright © 2017 Elsevier Ltd. All rights reserved.
Boedeker, Peter
2017-01-01
Hierarchical linear modeling (HLM) is a useful tool when analyzing data collected from groups. There are many decisions to be made when constructing and estimating a model in HLM including which estimation technique to use. Three of the estimation techniques available when analyzing data with HLM are maximum likelihood, restricted maximum…
A hybrid solar panel maximum power point search method that uses light and temperature sensors
Ostrowski, Mariusz
2016-04-01
Solar cells have low efficiency and non-linear characteristics. To increase the output power solar cells are connected in more complex structures. Solar panels consist of series of connected solar cells with a few bypass diodes, to avoid negative effects of partial shading conditions. Solar panels are connected to special device named the maximum power point tracker. This device adapt output power from solar panels to load requirements and have also build in a special algorithm to track the maximum power point of solar panels. Bypass diodes may cause appearance of local maxima on power-voltage curve when the panel surface is illuminated irregularly. In this case traditional maximum power point tracking algorithms can find only a local maximum power point. In this article the hybrid maximum power point search algorithm is presented. The main goal of the proposed method is a combination of two algorithms: a method that use temperature sensors to track maximum power point in partial shading conditions and a method that use illumination sensor to track maximum power point in equal illumination conditions. In comparison to another methods, the proposed algorithm uses correlation functions to determinate the relationship between values of illumination and temperature sensors and the corresponding values of current and voltage in maximum power point. In partial shading condition the algorithm calculates local maximum power points bases on the value of temperature and the correlation function and after that measures the value of power on each of calculated point choose those with have biggest value, and on its base run the perturb and observe search algorithm. In case of equal illumination algorithm calculate the maximum power point bases on the illumination value and the correlation function and on its base run the perturb and observe algorithm. In addition, the proposed method uses a special coefficient modification of correlation functions algorithm. This sub
Maximum likelihood molecular clock comb: analytic solutions.
Chor, Benny; Khetan, Amit; Snir, Sagi
2006-04-01
Maximum likelihood (ML) is increasingly used as an optimality criterion for selecting evolutionary trees, but finding the global optimum is a hard computational task. Because no general analytic solution is known, numeric techniques such as hill climbing or expectation maximization (EM), are used in order to find optimal parameters for a given tree. So far, analytic solutions were derived only for the simplest model--three taxa, two state characters, under a molecular clock. Four taxa rooted trees have two topologies--the fork (two subtrees with two leaves each) and the comb (one subtree with three leaves, the other with a single leaf). In a previous work, we devised a closed form analytic solution for the ML molecular clock fork. In this work, we extend the state of the art in the area of analytic solutions ML trees to the family of all four taxa trees under the molecular clock assumption. The change from the fork topology to the comb incurs a major increase in the complexity of the underlying algebraic system and requires novel techniques and approaches. We combine the ultrametric properties of molecular clock trees with the Hadamard conjugation to derive a number of topology dependent identities. Employing these identities, we substantially simplify the system of polynomial equations. We finally use tools from algebraic geometry (e.g., Gröbner bases, ideal saturation, resultants) and employ symbolic algebra software to obtain analytic solutions for the comb. We show that in contrast to the fork, the comb has no closed form solutions (expressed by radicals in the input data). In general, four taxa trees can have multiple ML points. In contrast, we can now prove that under the molecular clock assumption, the comb has a unique (local and global) ML point. (Such uniqueness was previously shown for the fork.).
Maximum entropy reconstruction of spin densities involving non uniform prior
Schweizer, J.; Ressouche, E. [DRFMC/SPSMS/MDN CEA-Grenoble (France); Papoular, R.J. [CEA-Saclay, Gif sur Yvette (France). Lab. Leon Brillouin; Tasset, F. [Inst. Laue Langevin, Grenoble (France); Zheludev, A.I. [Brookhaven National Lab., Upton, NY (United States). Physics Dept.
1997-09-01
Diffraction experiments give microscopic information on structures in crystals. A method which uses the concept of maximum of entropy (MaxEnt), appears to be a formidable improvement in the treatment of diffraction data. This method is based on a bayesian approach: among all the maps compatible with the experimental data, it selects that one which has the highest prior (intrinsic) probability. Considering that all the points of the map are equally probable, this probability (flat prior) is expressed via the Boltzman entropy of the distribution. This method has been used for the reconstruction of charge densities from X-ray data, for maps of nuclear densities from unpolarized neutron data as well as for distributions of spin density. The density maps obtained by this method, as compared to those resulting from the usual inverse Fourier transformation, are tremendously improved. In particular, any substantial deviation from the background is really contained in the data, as it costs entropy compared to a map that would ignore such features. However, in most of the cases, before the measurements are performed, some knowledge exists about the distribution which is investigated. It can range from the simple information of the type of scattering electrons to an elaborate theoretical model. In these cases, the uniform prior which considers all the different pixels as equally likely, is too weak a requirement and has to be replaced. In a rigorous bayesian analysis, Skilling has shown that prior knowledge can be encoded into the Maximum Entropy formalism through a model m({rvec r}), via a new definition for the entropy given in this paper. In the absence of any data, the maximum of the entropy functional is reached for {rho}({rvec r}) = m({rvec r}). Any substantial departure from the model, observed in the final map, is really contained in the data as, with the new definition, it costs entropy. This paper presents illustrations of model testing.
Observer's observables. Residual diffeomorphisms
Duch, Paweł; Świeżewski, Jedrzej
2016-01-01
We investigate the fate of diffeomorphisms when the radial gauge is imposed in canonical general relativity. As shown elsewhere, the radial gauge is closely related to the observer's observables. These observables are invariant under a large subgroup of diffeomorphisms which results in their usefulness for canonical general relativity. There are, however, some diffeomorphisms, called residual diffeomorphisms, which might be "observed" by the observer as they do not preserve her observables. The present paper is devoted to the analysis of these diffeomorphisms in the case of the spatial and spacetime radial gauges. Although the residual diffeomorphisms do not form a subgroup of all diffeomorphisms, we show that their induced action in the phase space does form a group. We find the generators of the induced transformations and compute the structure functions of the algebras they form. The obtained algebras are deformations of the algebra of the Euclidean group and the algebra of the Poincar\\'e group in the spat...
The Prediction of Maximum Amplitudes of Solar Cycles and the Maximum Amplitude of Solar Cycle 24
无
2002-01-01
We present a brief review of predictions of solar cycle maximum ampli-tude with a lead time of 2 years or more. It is pointed out that a precise predictionof the maximum amplitude with such a lead-time is still an open question despiteprogress made since the 1960s. A method of prediction using statistical character-istics of solar cycles is developed: the solar cycles are divided into two groups, ahigh rising velocity (HRV) group and a low rising velocity (LRV) group, dependingon the rising velocity in the ascending phase for a given duration of the ascendingphase. The amplitude of Solar Cycle 24 can be predicted after the start of thecycle using the formula derived in this paper. Now, about 5 years before the startof the cycle, we can make a preliminary prediction of 83.2-119.4 for its maximumamplitude.
Enzyme kinetics and the maximum entropy production principle.
Dobovišek, Andrej; Zupanović, Paško; Brumen, Milan; Bonačić-Lošić, Zeljana; Kuić, Domagoj; Juretić, Davor
2011-03-01
A general proof is derived that entropy production can be maximized with respect to rate constants in any enzymatic transition. This result is used to test the assumption that biological evolution of enzyme is accompanied with an increase of entropy production in its internal transitions and that such increase can serve to quantify the progress of enzyme evolution. The state of maximum entropy production would correspond to fully evolved enzyme. As an example the internal transition ES↔EP in a generalized reversible Michaelis-Menten three state scheme is analyzed. A good agreement is found among experimentally determined values of the forward rate constant in internal transitions ES→EP for three types of β-Lactamase enzymes and their optimal values predicted by the maximum entropy production principle, which agrees with earlier observations that β-Lactamase enzymes are nearly fully evolved. The optimization of rate constants as the consequence of basic physical principle, which is the subject of this paper, is a completely different concept from a) net metabolic flux maximization or b) entropy production minimization (in the static head state), both also proposed to be tightly connected to biological evolution.
An Integrated Modeling Framework for Probable Maximum Precipitation and Flood
Gangrade, S.; Rastogi, D.; Kao, S. C.; Ashfaq, M.; Naz, B. S.; Kabela, E.; Anantharaj, V. G.; Singh, N.; Preston, B. L.; Mei, R.
2015-12-01
With the increasing frequency and magnitude of extreme precipitation and flood events projected in the future climate, there is a strong need to enhance our modeling capabilities to assess the potential risks on critical energy-water infrastructures such as major dams and nuclear power plants. In this study, an integrated modeling framework is developed through high performance computing to investigate the climate change effects on probable maximum precipitation (PMP) and probable maximum flood (PMF). Multiple historical storms from 1981-2012 over the Alabama-Coosa-Tallapoosa River Basin near the Atlanta metropolitan area are simulated by the Weather Research and Forecasting (WRF) model using the Climate Forecast System Reanalysis (CFSR) forcings. After further WRF model tuning, these storms are used to simulate PMP through moisture maximization at initial and lateral boundaries. A high resolution hydrological model, Distributed Hydrology-Soil-Vegetation Model, implemented at 90m resolution and calibrated by the U.S. Geological Survey streamflow observations, is then used to simulate the corresponding PMF. In addition to the control simulation that is driven by CFSR, multiple storms from the Community Climate System Model version 4 under the Representative Concentrations Pathway 8.5 emission scenario are used to simulate PMP and PMF in the projected future climate conditions. The multiple PMF scenarios developed through this integrated modeling framework may be utilized to evaluate the vulnerability of existing energy-water infrastructures with various aspects associated PMP and PMF.
IDENTIFICATION OF IDEOTYPES BY CANONICAL ANALYSIS IN Panicum maximum
Janaina Azevedo Martuscello
2015-04-01
Full Text Available Grouping of genotypes by canonical variable analysis is an important tool in breeding. It allows the grouping of individuals with similar characteristics that are associated with superior agronomic performance and may indicate the ideal profile of a plant for the region. The objective of the present study was to define, by canonical analysis, the agronomic profile of Panicum maximum plants adapted to the Agreste region. The experiment was conducted in a completely randomized design with 28 treatments, 22 genotypes of Panicum maximum, and cultivars Mombasa, Tanzania, Massai, Milenio, BRS Zuri, and BRS Tamani in triplicate in 4-m² plots. Plots were harvested five times and the following traits were evaluated: plant height; total, leaf, and stem; dead dry matter yields; leaf:stem ratio; leaf percentage; and volumetric density of forage. The analysis of canonical variables was performed based on the phenotypic means of the evaluated traits and on the residual variance and covariance matrix. Genotype PM34 showed higher mean leaf dry matter yield under the conditions of the Agreste of Alagoas (on average 53% higher than cultivars Mombasa, Tanzania, Milenio and Massai. It was possible to summarize the variation observed in eight agronomic characteristics in only two canonical variables accounting for 81.44 % of the data variation. The ideotype plant adapted to the conditions of the Agreste should be tall and present high leaf yield, leaf percentage, and leaf:stem ratio, and intermediate values of volumetric density of forage.
Prospects of long-time-series observations from Dome C for transit search
Rauer, Heike; Erikson, Anders
2008-01-01
The detection of transiting extrasolar planets requires high-photometric quality and long-duration photometric stellar time-series. In this paper, we investigate the advantages provided by the Antarctic observing platform Dome C for planet transit detections during its long winter period, which allows for relatively long, uninterrupted time-series. Our calculations include limiting effects due to the Sun and Moon, cloud coverage and the effect of reduced photometric quality for high extinction of target fields. We compare the potential for long time-series from Dome C with a single site in Chile, a three-site low-latitude network as well as combinations of Dome C with Chile and the network, respectively. Dome C is one of the prime astronomical sites on Earth for obtaining uninterrupted long-duration observations in terms of prospects for a high observational duty cycle. The duty cycle of a project can, however, be significantly improved by integrating Dome C into a network of sites.
Pattern formation, logistics, and maximum path probability
Kirkaldy, J. S.
1985-05-01
The concept of pattern formation, which to current researchers is a synonym for self-organization, carries the connotation of deductive logic together with the process of spontaneous inference. Defining a pattern as an equivalence relation on a set of thermodynamic objects, we establish that a large class of irreversible pattern-forming systems, evolving along idealized quasisteady paths, approaches the stable steady state as a mapping upon the formal deductive imperatives of a propositional function calculus. In the preamble the classical reversible thermodynamics of composite systems is analyzed as an externally manipulated system of space partitioning and classification based on ideal enclosures and diaphragms. The diaphragms have discrete classification capabilities which are designated in relation to conserved quantities by descriptors such as impervious, diathermal, and adiabatic. Differentiability in the continuum thermodynamic calculus is invoked as equivalent to analyticity and consistency in the underlying class or sentential calculus. The seat of inference, however, rests with the thermodynamicist. In the transition to an irreversible pattern-forming system the defined nature of the composite reservoirs remains, but a given diaphragm is replaced by a pattern-forming system which by its nature is a spontaneously evolving volume partitioner and classifier of invariants. The seat of volition or inference for the classification system is thus transferred from the experimenter or theoretician to the diaphragm, and with it the full deductive facility. The equivalence relations or partitions associated with the emerging patterns may thus be associated with theorems of the natural pattern-forming calculus. The entropy function, together with its derivatives, is the vehicle which relates the logistics of reservoirs and diaphragms to the analog logistics of the continuum. Maximum path probability or second-order differentiability of the entropy in isolation are
Hardware Implementation of Maximum Power Point Tracking for Thermoelectric Generators
Maganga, Othman; Phillip, Navneesh; Burnham, Keith J.; Montecucco, Andrea; Siviter, Jonathan; Knox, Andrew; Simpson, Kevin
2014-06-01
This work describes the practical implementation of two maximum power point tracking (MPPT) algorithms, namely those of perturb and observe, and extremum seeking control. The proprietary dSPACE system is used to perform hardware in the loop (HIL) simulation whereby the two control algorithms are implemented using the MATLAB/Simulink (Mathworks, Natick, MA) software environment in order to control a synchronous buck-boost converter connected to two commercial thermoelectric modules. The process of performing HIL simulation using dSPACE is discussed, and a comparison between experimental and simulated results is highlighted. The experimental results demonstrate the validity of the two MPPT algorithms, and in conclusion the benefits and limitations of real-time implementation of MPPT controllers using dSPACE are discussed.
Test images for the maximum entropy image restoration method
Mackey, James E.
1990-01-01
One of the major activities of any experimentalist is data analysis and reduction. In solar physics, remote observations are made of the sun in a variety of wavelengths and circumstances. In no case is the data collected free from the influence of the design and operation of the data gathering instrument as well as the ever present problem of noise. The presence of significant noise invalidates the simple inversion procedure regardless of the range of known correlation functions. The Maximum Entropy Method (MEM) attempts to perform this inversion by making minimal assumptions about the data. To provide a means of testing the MEM and characterizing its sensitivity to noise, choice of point spread function, type of data, etc., one would like to have test images of known characteristics that can represent the type of data being analyzed. A means of reconstructing these images is presented.
Maximum Likelihood Analysis of Low Energy CDMS II Germanium Data
Agnese, R; Balakishiyeva, D; Thakur, R Basu; Bauer, D A; Billard, J; Borgland, A; Bowles, M A; Brandt, D; Brink, P L; Bunker, R; Cabrera, B; Caldwell, D O; Cerdeno, D G; Chagani, H; Chen, Y; Cooley, J; Cornell, B; Crewdson, C H; Cushman, P; Daal, M; Di Stefano, P C F; Doughty, T; Esteban, L; Fallows, S; Figueroa-Feliciano, E; Fritts, M; Godfrey, G L; Golwala, S R; Graham, M; Hall, J; Harris, H R; Hertel, S A; Hofer, T; Holmgren, D; Hsu, L; Huber, M E; Jastram, A; Kamaev, O; Kara, B; Kelsey, M H; Kennedy, A; Kiveni, M; Koch, K; Leder, A; Loer, B; Asamar, E Lopez; Mahapatra, R; Mandic, V; Martinez, C; McCarthy, K A; Mirabolfathi, N; Moffatt, R A; Moore, D C; Nelson, R H; Oser, S M; Page, K; Page, W A; Partridge, R; Pepin, M; Phipps, A; Prasad, K; Pyle, M; Qiu, H; Rau, W; Redl, P; Reisetter, A; Ricci, Y; Rogers, H E; Saab, T; Sadoulet, B; Sander, J; Schneck, K; Schnee, R W; Scorza, S; Serfass, B; Shank, B; Speller, D; Upadhyayula, S; Villano, A N; Welliver, B; Wright, D H; Yellin, S; Yen, J J; Young, B A; Zhang, J
2014-01-01
We report on the results of a search for a Weakly Interacting Massive Particle (WIMP) signal in low-energy data of the Cryogenic Dark Matter Search (CDMS~II) experiment using a maximum likelihood analysis. A background model is constructed using GEANT4 to simulate the surface-event background from $^{210}$Pb decay-chain events, while using independent calibration data to model the gamma background. Fitting this background model to the data results in no statistically significant WIMP component. In addition, we perform fits using an analytic ad hoc background model proposed by Collar and Fields, who claimed to find a large excess of signal-like events in our data. We confirm the strong preference for a signal hypothesis in their analysis under these assumptions, but excesses are observed in both single- and multiple-scatter events, which implies the signal is not caused by WIMPs, but rather reflects the inadequacy of their background model.
Maximum, minimum, and optimal mutation rates in dynamic environments
Ancliff, Mark; Park, Jeong-Man
2009-12-01
We analyze the dynamics of the parallel mutation-selection quasispecies model with a changing environment. For an environment with the sharp-peak fitness function in which the most fit sequence changes by k spin flips every period T , we find analytical expressions for the minimum and maximum mutation rates for which a quasispecies can survive, valid in the limit of large sequence size. We find an asymptotic solution in which the quasispecies population changes periodically according to the periodic environmental change. In this state we compute the mutation rate that gives the optimal mean fitness over a period. We find that the optimal mutation rate per genome, k/T , is independent of genome size, a relationship which is observed across broad groups of real organisms.
Optimal specific wavelength for maximum thrust production in undulatory propulsion.
Nangia, Nishant; Bale, Rahul; Chen, Nelson; Hanna, Yohanna; Patankar, Neelesh A
2017-01-01
What wavelengths do undulatory swimmers use during propulsion? In this work we find that a wide range of body/caudal fin (BCF) swimmers, from larval zebrafish and herring to fully-grown eels, use specific wavelength (ratio of wavelength to tail amplitude of undulation) values that fall within a relatively narrow range. The possible emergence of this constraint is interrogated using numerical simulations of fluid-structure interaction. Based on these, it was found that there is an optimal specific wavelength (OSW) that maximizes the swimming speed and thrust generated by an undulatory swimmer. The observed values of specific wavelength for BCF animals are relatively close to this OSW. The mechanisms underlying the maximum propulsive thrust for BCF swimmers are quantified and are found to be consistent with the mechanisms hypothesized in prior work. The adherence to an optimal value of specific wavelength in most natural hydrodynamic propulsors gives rise to empirical design criteria for man-made propulsors.
Maximum likelihood method and Fisher's information in physics and econophysics
Syska, Jacek
2012-01-01
Three steps in the development of the maximum likelihood (ML) method are presented. At first, the application of the ML method and Fisher information notion in the model selection analysis is described (Chapter 1). The fundamentals of differential geometry in the construction of the statistical space are introduced, illustrated also by examples of the estimation of the exponential models. At second, the notions of the relative entropy and the information channel capacity are introduced (Chapter 2). The observed and expected structural information principle (IP) and the variational IP of the modified extremal physical information (EPI) method of Frieden and Soffer are presented and discussed (Chapter 3). The derivation of the structural IP based on the analyticity of the logarithm of the likelihood function and on the metricity of the statistical space of the system is given. At third, the use of the EPI method is developed (Chapters 4-5). The information channel capacity is used for the field theory models cl...
Cardiorespiratory Fitness of Inmates of a Maximum Security Prison ...
USER
Maximum Security Prison; and also to determine the effects of age, gender, and period of incarceration on CRF. A total of 247 apparently healthy inmates of Maiduguri Maximum Security ... with different types of cardiovascular and metabolic.
Maximum likelihood polynomial regression for robust speech recognition
LU Yong; WU Zhenyang
2011-01-01
The linear hypothesis is the main disadvantage of maximum likelihood linear re- gression （MLLR）. This paper applies the polynomial regression method to model adaptation and establishes a nonlinear model adaptation algorithm using maximum likelihood polyno
Accurate Maximum Power Tracking in Photovoltaic Systems Affected by Partial Shading
Pierluigi Guerriero
2015-01-01
Full Text Available A maximum power tracking algorithm exploiting operating point information gained on individual solar panels is presented. The proposed algorithm recognizes the presence of multiple local maxima in the power voltage curve of a shaded solar field and evaluates the coordinated of the absolute maximum. The effectiveness of the proposed approach is evidenced by means of circuit level simulation and experimental results. Experiments evidenced that, in comparison with a standard perturb and observe algorithm, we achieve faster convergence in normal operating conditions (when the solar field is uniformly illuminated and we accurately locate the absolute maximum power point in partial shading conditions, thus avoiding the convergence on local maxima.
Tightness of the recentered maximum of the two-dimensional discrete Gaussian Free Field
Bramson, Maury
2010-01-01
We consider the maximum of the discrete two dimensional Gaussian free field (GFF) in a box, and prove that its maximum, centered at its mean, is tight, settling a long-standing conjecture. The proof combines a recent observation of Bolthausen, Deuschel and Zeitouni with elements from (Bramson 1978) and comparison theorems for Gaussian fields. An essential part of the argument is the precise evaluation, up to an error of order 1, of the expected value of the maximum of the GFF in a box. Related Gaussian fields, such as the GFF on a two-dimensional torus, are also discussed.
Feedback Limits to Maximum Seed Masses of Black Holes
Pacucci, Fabio; Natarajan, Priyamvada; Ferrara, Andrea
2017-02-01
The most massive black holes observed in the universe weigh up to ∼1010 M ⊙, nearly independent of redshift. Reaching these final masses likely required copious accretion and several major mergers. Employing a dynamical approach that rests on the role played by a new, relevant physical scale—the transition radius—we provide a theoretical calculation of the maximum mass achievable by a black hole seed that forms in an isolated halo, one that scarcely merged. Incorporating effects at the transition radius and their impact on the evolution of accretion in isolated halos, we are able to obtain new limits for permitted growth. We find that large black hole seeds (M • ≳ 104 M ⊙) hosted in small isolated halos (M h ≲ 109 M ⊙) accreting with relatively small radiative efficiencies (ɛ ≲ 0.1) grow optimally in these circumstances. Moreover, we show that the standard M •–σ relation observed at z ∼ 0 cannot be established in isolated halos at high-z, but requires the occurrence of mergers. Since the average limiting mass of black holes formed at z ≳ 10 is in the range 104–6 M ⊙, we expect to observe them in local galaxies as intermediate-mass black holes, when hosted in the rare halos that experienced only minor or no merging events. Such ancient black holes, formed in isolation with subsequent scant growth, could survive, almost unchanged, until present.
M. Mihelich
2014-11-01
Full Text Available We derive rigorous results on the link between the principle of maximum entropy production and the principle of maximum Kolmogorov–Sinai entropy using a Markov model of the passive scalar diffusion called the Zero Range Process. We show analytically that both the entropy production and the Kolmogorov–Sinai entropy seen as functions of f admit a unique maximum denoted fmaxEP and fmaxKS. The behavior of these two maxima is explored as a function of the system disequilibrium and the system resolution N. The main result of this article is that fmaxEP and fmaxKS have the same Taylor expansion at first order in the deviation of equilibrium. We find that fmaxEP hardly depends on N whereas fmaxKS depends strongly on N. In particular, for a fixed difference of potential between the reservoirs, fmaxEP(N tends towards a non-zero value, while fmaxKS(N tends to 0 when N goes to infinity. For values of N typical of that adopted by Paltridge and climatologists (N ≈ 10 ~ 100, we show that fmaxEP and fmaxKS coincide even far from equilibrium. Finally, we show that one can find an optimal resolution N* such that fmaxEP and fmaxKS coincide, at least up to a second order parameter proportional to the non-equilibrium fluxes imposed to the boundaries. We find that the optimal resolution N* depends on the non equilibrium fluxes, so that deeper convection should be represented on finer grids. This result points to the inadequacy of using a single grid for representing convection in climate and weather models. Moreover, the application of this principle to passive scalar transport parametrization is therefore expected to provide both the value of the optimal flux, and of the optimal number of degrees of freedom (resolution to describe the system.
20 CFR 617.14 - Maximum amount of TRA.
2010-04-01
... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Maximum amount of TRA. 617.14 Section 617.14... FOR WORKERS UNDER THE TRADE ACT OF 1974 Trade Readjustment Allowances (TRA) § 617.14 Maximum amount of TRA. (a) General rule. Except as provided under paragraph (b) of this section, the maximum amount of...
40 CFR 94.107 - Determination of maximum test speed.
2010-07-01
... specified in 40 CFR 1065.510. These data points form the lug curve. It is not necessary to generate the... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Determination of maximum test speed... Determination of maximum test speed. (a) Overview. This section specifies how to determine maximum test...
14 CFR 25.1505 - Maximum operating limit speed.
2010-01-01
... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Maximum operating limit speed. 25.1505... Operating Limitations § 25.1505 Maximum operating limit speed. The maximum operating limit speed (V MO/M MO airspeed or Mach Number, whichever is critical at a particular altitude) is a speed that may not...
Maximum Performance Tests in Children with Developmental Spastic Dysarthria.
Wit, J.; And Others
1993-01-01
Three Maximum Performance Tasks (Maximum Sound Prolongation, Fundamental Frequency Range, and Maximum Repetition Rate) were administered to 11 children (ages 6-11) with spastic dysarthria resulting from cerebral palsy and 11 controls. Despite intrasubject and intersubject variability in normal and pathological speakers, the tasks were found to be…
Maximum physical capacity testing in cancer patients undergoing chemotherapy
Knutsen, L.; Quist, M; Midtgaard, J
2006-01-01
BACKGROUND: Over the past few years there has been a growing interest in the field of physical exercise in rehabilitation of cancer patients, leading to requirements for objective maximum physical capacity measurement (maximum oxygen uptake (VO(2max)) and one-repetition maximum (1RM)) to determine...
The role of pressure anisotropy on the maximum mass of cold compact stars
Karmakar, S.; Mukherjee, S.; Sharma, R.; Maharaj, S. D.
2007-06-01
We study the physical features of a class of exact solutions for cold compact anisotropic stars. The effect of pressure anisotropy on the maximum mass and surface red-shift is analysed in the Vaidya--Tikekar model. It is shown that maximum compactness, red-shift and mass increase in the presence of anisotropic pressures; numerical values are generated which are in agreement with observation.
The role of pressure anisotropy on the maximum mass of cold compact stars
S Karmakar; S Mukherjee; S Sharma; S D Maharaj
2007-06-01
We study the physical features of a class of exact solutions for cold compact anisotropic stars. The effect of pressure anisotropy on the maximum mass and surface red-shift is analysed in the Vaidya–Tikekar model. It is shown that maximum compactness, red-shift and mass increase in the presence of anisotropic pressures; numerical values are generated which are in agreement with observation.
The directed flow maximum near cs = 0
Brachmann, J.; Dumitru, A.; Stöcker, H.; Greiner, W.
2000-07-01
We investigate the excitation function of quark-gluon plasma formation and of directed in-plane flow of nucleons in the energy range of the BNL-AGS and for the E {Lab/kin} = 40 AGeV Pb + Pb collisions performed recently at the CERN-SPS. We employ the three-fluid model with dynamical unification of kinetically equilibrated fluid elements. Within our model with first-order phase transition at high density, droplets of QGP coexisting with hadronic matter are produced already at BNL-AGS energies, E {Lab/kin} ≃ 10 AGeV. A substantial decrease of the isentropic velocity of sound, however, requires higher energies, E {Lab/kin} ≃ 0 AGeV. We show the effect on the flow of nucleons in the reaction plane. According to our model calculations, kinematic requirements and EoS effects work hand-in-hand at E {Lab/kin} = 40 AGeV to allow the observation of the dropping velocity of sound via an increase of the directed flow around midrapidity as compared to top BNL-AGS energy.
Upstream proton cyclotron waves at Venus near solar maximum
Delva, M.; Bertucci, C.; Volwerk, M.; Lundin, R.; Mazelle, C.; Romanelli, N.
2015-01-01
magnetometer data of Venus Express are analyzed for the occurrence of waves at the proton cyclotron frequency in the spacecraft frame in the upstream region of Venus, for conditions of rising solar activity. The data of two Venus years up to the time of highest sunspot number so far (1 Mar 2011 to 31 May 2012) are studied to reveal the properties of the waves and the interplanetary magnetic field (IMF) conditions under which they are observed. In general, waves generated by newborn protons from exospheric hydrogen are observed under quasi- (anti)parallel conditions of the IMF and the solar wind velocity, as is expected from theoretical models. The present study near solar maximum finds significantly more waves than a previous study for solar minimum, with an asymmetry in the wave occurrence, i.e., mainly under antiparallel conditions. The plasma data from the Analyzer of Space Plasmas and Energetic Atoms instrument aboard Venus Express enable analysis of the background solar wind conditions. The prevalence of waves for IMF in direction toward the Sun is related to the stronger southward tilt of the heliospheric current sheet for the rising phase of Solar Cycle 24, i.e., the "bashful ballerina" is responsible for asymmetric background solar wind conditions. The increase of the number of wave occurrences may be explained by a significant increase in the relative density of planetary protons with respect to the solar wind background. An exceptionally low solar wind proton density is observed during the rising phase of Solar Cycle 24. At the same time, higher EUV increases the ionization in the Venus exosphere, resulting in higher supply of energy from a higher number of newborn protons to the wave. We conclude that in addition to quasi- (anti)parallel conditions of the IMF and the solar wind velocity direction, the higher relative density of Venus exospheric protons with respect to the background solar wind proton density is the key parameter for the higher number of
Berry, Vincent; Nicolas, François
2006-01-01
Given a set of evolutionary trees on a same set of taxa, the maximum agreement subtree problem (MAST), respectively, maximum compatible tree problem (MCT), consists of finding a largest subset of taxa such that all input trees restricted to these taxa are isomorphic, respectively compatible. These problems have several applications in phylogenetics such as the computation of a consensus of phylogenies obtained from different data sets, the identification of species subjected to horizontal gene transfers and, more recently, the inference of supertrees, e.g., Trees Of Life. We provide two linear time algorithms to check the isomorphism, respectively, compatibility, of a set of trees or otherwise identify a conflict between the trees with respect to the relative location of a small subset of taxa. Then, we use these algorithms as subroutines to solve MAST and MCT on rooted or unrooted trees of unbounded degree. More precisely, we give exact fixed-parameter tractable algorithms, whose running time is uniformly polynomial when the number of taxa on which the trees disagree is bounded. The improves on a known result for MAST and proves fixed-parameter tractability for MCT.
Complex X-ray spectral variability in Mkn 421 observed with XMM-Newton
Sembay, S; Markowitz, A R; Griffiths, R G; Turner, M J L
2002-01-01
The bright blazar Mkn 421 has been observed four times for uninterrupted durations of ~ 9 - 13 hr during the performance verification and calibration phases of the XMM-Newton mission. The source was strongly variable in all epochs, with variability amplitudes that generally increased to higher energy bands. Although the detailed relationship between soft (0.1 - 0.75 keV) and hard (2 - 10 keV) band differed from one epoch to the next, in no case was there any evidence for a measurable interband lag, with robust upper limits of $| \\tau | < 0.08 $ hr in the best-correlated light curves. This is in conflict with previous claims of both hard and soft lags of ~1 hr in this and other blazars. However, previous observations suffered a repeated 1.6 hr feature induced by the low-Earth orbital period, a feature that is not present in the uninterrupted XMM-Newton data. The new upper limit on $|\\tau|$ leads to a lower limit on the magnetic field strength and Doppler factor of $ B \\delta^{1/3} \\gs 4.7 $ G, mildly out of...
On Global Magnetic ``Monopoly'' Near Solar Cycle Maximums
Kryvodubskyj, V.
During last maximums of the solar activity the both poles of the polar magnetic field had the same polarity. Since in the turbulent α Ω -dynamo model the excitation thresholds of the periodic dipole and quadrupole modes of the poloidal madnetic field (PMF) are rather close [Parker E. N.: 1971, Ap.J. V. 164, p. 491] then it is possible that the quadrupole mode may be excited due to variations of physical parameters in a some regions of the solar convection zone (SCZ). The pattern of the excited modes (dipole, quadrupole, octupole, etc.) is determined by the values of wave number of the Parker's dynamo-wave. We calculated these values for the SCZ model by Stix (1989) [Stix M.: 1989, The Sun. Berlin, p. 200] in the vicinity of solar tachocline (a region of strong shear of angular velocity at the base of the SCZ) with using our estimation of the helical turbulence parameter [Krivodubskij V. N.: 1998, Astron. Reports V. 42, No 1, p. 122] and values of the radial gradient of the angular velocity obtained from the newer helioseismic measurements (during rising phase of 23th solar cycle: 1995-1999) [Howe R.,Christensen-Dalsgaard J., Hill F. et al.: 2000, Science. V. 287, p. 2456]. It is found out that at low latitudes dynamo mechanism produces rather the dipole (wave number ≈ -7), the main antisymmetric, relatively to equatorial plane, mode of the PMF; while at the latitudes higher than 50o the conditions are more favourable for exciting of the quadrupole (wave number ≈ +8), the lowest symmetric mode. Arised north-south magnetic structure asymmetry gives an opportunity to explain the space magnetic anomaly of the PMF (``monopoly'') observed near solar cycle maximums.
Maximum likelihood based classification of electron tomographic data.
Stölken, Michael; Beck, Florian; Haller, Thomas; Hegerl, Reiner; Gutsche, Irina; Carazo, Jose-Maria; Baumeister, Wolfgang; Scheres, Sjors H W; Nickell, Stephan
2011-01-01
Classification and averaging of sub-tomograms can improve the fidelity and resolution of structures obtained by electron tomography. Here we present a three-dimensional (3D) maximum likelihood algorithm--MLTOMO--which is characterized by integrating 3D alignment and classification into a single, unified processing step. The novelty of our approach lies in the way we calculate the probability of observing an individual sub-tomogram for a given reference structure. We assume that the reference structure is affected by a 'compound wedge', resulting from the summation of many individual missing wedges in distinct orientations. The distance metric underlying our probability calculations effectively down-weights Fourier components that are observed less frequently. Simulations demonstrate that MLTOMO clearly outperforms the 'constrained correlation' approach and has advantages over existing approaches in cases where the sub-tomograms adopt preferred orientations. Application of our approach to cryo-electron tomographic data of ice-embedded thermosomes revealed distinct conformations that are in good agreement with results obtained by previous single particle studies.
Comparative study of maximum isometric grip strength in different sports
Noé Gomes Borges Junior
2009-06-01
Full Text Available The objective of this study was to compare maximum isometric grip strength (Fmaxbetween different sports and between the dominant (FmaxD and non-dominant (FmaxND hand. Twenty-nine male aikido (AI, jiujitsu (JJ, judo (JU and rowing (RO athletes and 21non-athletes (NA participated in the study. The hand strength test consisted of maintainingmaximum isometric grip strength for 10 seconds using a hand dynamometer. The position of the subjects was that suggested by the American Society of Hand Therapy. Factorial 2X5 ANOVA with Bonferroni correction, followed by a paired t test and Tukey test, was used for statistical analysis. The highest Fmax values were observed for the JJ group when using the dominant hand,followed by the JU, RO, AI and NA groups. Variation in Fmax could be attributed to handdominance (30.9%, sports modality (39.9% and the interaction between hand dominance andsport (21.3%. The present results demonstrated significant differences in Fmax between the JJ and AI groups and between the JJ and NA groups for both the dominant and non-dominant hand. Significant differences in Fmax between the dominant and non-dominant hand were only observed in the AI and NA groups. The results indicate that Fmax can be used for comparisonbetween different sports modalities, and to identify differences between the dominant and nondominanthand. Studies involving a larger number of subjects will permit the identification of differences between other modalities.
CMB Maximum Temperature Asymmetry Axis: Alignment with Other Cosmic Asymmetries
Mariano, Antonio
2012-01-01
We use a global pixel based estimator to identify the axis of the residual Maximum Temperature Asymmetry (MTA) (after the dipole subtraction) of the WMAP 7 year Internal Linear Combination (ILC) CMB temperature sky map. The estimator is based on considering the temperature differences between opposite pixels in the sky at various angular resolutions (4 degrees-15 degrees and selecting the axis that maximizes this difference. We consider three large scale Healpix resolutions (N_{side}=16 (3.7 degrees), N_{side}=8 (7.3 degrees) and N_{side}=4 (14.7 degrees)). We compare the direction and magnitude of this asymmetry with three other cosmic asymmetry axes (\\alpha dipole, Dark Energy Dipole and Dark Flow) and find that the four asymmetry axes are abnormally close to each other. We compare the observed MTA axis with the corresponding MTA axes of 10^4 Gaussian isotropic simulated ILC maps (based on LCDM). The fraction of simulated ILC maps that reproduces the observed magnitude of the MTA asymmetry and alignment wit...
Present and Last Glacial Maximum climates as states of maximum entropy production
Herbert, Corentin; Kageyama, Masa; Dubrulle, Berengere
2011-01-01
The Earth, like other planets with a relatively thick atmosphere, is not locally in radiative equilibrium and the transport of energy by the geophysical fluids (atmosphere and ocean) plays a fundamental role in determining its climate. Using simple energy-balance models, it was suggested a few decades ago that the meridional energy fluxes might follow a thermodynamic Maximum Entropy Production (MEP) principle. In the present study, we assess the MEP hypothesis in the framework of a minimal climate model based solely on a robust radiative scheme and the MEP principle, with no extra assumptions. Specifically, we show that by choosing an adequate radiative exchange formulation, the Net Exchange Formulation, a rigorous derivation of all the physical parameters can be performed. The MEP principle is also extended to surface energy fluxes, in addition to meridional energy fluxes. The climate model presented here is extremely fast, needs very little empirical data and does not rely on ad hoc parameterizations. We in...
魏伟龙; 李辉
2015-01-01
This paper describes auxiliary system uninterrupted power supply technology of the new generation AC drive electric lo-comotive for passenger(The type of HXD1D),introduce the principle and the power supply situation in different conditions, and the advantages by adopting the technology.%介绍了我国新一代交流传动快速客运电力机车(HXD1D 型电力机车)所采用的辅助系统不间断供电技术，描述了其工作原理及不同工况下辅助负载的供电情况，以及采用该项技术具有的优势。
1984-06-01
RKHS) if point evaluation is a continuous operation, that is, v - vn in H(f?) implies that v (t) -o v(t) for all t e 12. See n Goffman and Pedrick ...34, ,-’, . .’. ’**’,,**4, .’ *"".-..’ * . .’ *" .-. .;¢ .’ .*** * .’ ’.L’,.’o ¢ . .* h~ ’a . ’’ *’’".2’ *.,’.. .: " 17 Goffman, C. & Pedrick , C
无
2008-01-01
Ecological systems in the headwaters of the Yellow River, characterized by hash natural environmental conditions, are very vulnerable to climatic change. In the most recent decades, this area greatly attracted the public's attention for its more and more deteriorating environmental conditions. Based on tree-ring samples from the Xiqing Mountain and A'nyêmagên Mountains at the headwaters of the Yellow River in the Northeastern Tibetan Plateau, we reconstructed the minimum temperatures in the winter half year over the last 425 years and the maximum temperatures in the summer half year over the past 700 years in this region. The variation of minimum temperature in the winter half year during the time span of 1578-1940 was a relatively stable trend, which was followed by an abrupt warming trend since 1941. However, there is no significant warming trend for the maximum temperature in the summer half year over the 20th century. The asymmetric variation patterns between the minimum and maximum temperatures were observed in this study over the past 425 years. During the past 425 years, there are similar variation patterns between the minimum and maximum temperatures; however, the minimum temperatures vary about 25 years earlier compared to the maximum temperatures. If such a trend of variation patterns between the minimum and maximum temperatures over the past 425 years continues in the future 30 years, the maximum temperature in this region will increase significantly.
Global Maximum Power Point Tracking of Photovoltaic Array under Partial Shaded Conditions
G.Shobana, P. Sornadeepika, Dr. R. Ramaprabha
2013-07-01
Full Text Available Efficiency of the PV module can be improved by operating at its peak power point so that the maximum power can be delivered to the load under varying environmental conditions. This paper is mainly focused on the maximum power point tracking of solar photovoltaic array (PV under non uniform insolation conditions. A maximum power point tracker (MPPT is used for extracting the maximum power from the solar PV module and transferring that power to the load. The problem of maximum power point (MPP tracking becomes a problem when the array receives non uniform insolation. Cells under shade absorb a large amount of electric power generated by cells receiving high insolation and convert it into heat which may damage the low illuminated cells. To relieve the stress on shaded cells, bypass diodes are added across the modules. In such a case multiple peaks in voltagepower characteristics are observed. Classical MPPT methods are not effective due to their inability to discriminate between local and global maximum. In this paper, Global MPPT algorithm is proposed to track the global maximum power point of PV array under partial shaded conditions.
Jacoby; GORDON
2008-01-01
Ecological systems in the headwaters of the Yellow River, characterized by hash natural environmental conditions, are very vulnerable to climatic change. In the most recent decades, this area greatly attracted the public’s attention for its more and more deteriorating environmental conditions. Based on tree-ring samples from the Xiqing Mountain and A’nyêmagên Mountains at the headwaters of the Yellow River in the Northeastern Tibetan Plateau, we reconstructed the minimum temperatures in the winter half year over the last 425 years and the maximum temperatures in the summer half year over the past 700 years in this region. The variation of minimum temperature in the winter half year during the time span of 1578―1940 was a relatively stable trend, which was followed by an abrupt warming trend since 1941. However, there is no significant warming trend for the maximum temperature in the summer half year over the 20th century. The asymmetric variation patterns between the minimum and maximum temperatures were observed in this study over the past 425 years. During the past 425 years, there are similar variation patterns between the minimum and maximum temperatures; however, the minimum temperatures vary about 25 years earlier compared to the maximum temperatures. If such a trend of variation patterns between the minimum and maximum temperatures over the past 425 years continues in the future 30 years, the maximum temperature in this region will increase significantly.
The relationship between the Guinea Highlands and the West African offshore rainfall maximum
Hamilton, H. L.; Young, G. S.; Evans, J. L.; Fuentes, J. D.; Núñez Ocasio, K. M.
2017-01-01
Satellite rainfall estimates reveal a consistent rainfall maximum off the West African coast during the monsoon season. An analysis of 16 years of rainfall in the monsoon season is conducted to explore the drivers of such copious amounts of rainfall. Composites of daily rainfall and midlevel meridional winds centered on the days with maximum rainfall show that the day with the heaviest rainfall follows the strongest midlevel northerlies but coincides with peak low-level moisture convergence. Rain type composites show that convective rain dominates the study region. The dominant contribution to the offshore rainfall maximum is convective development driven by the enhancement of upslope winds near the Guinea Highlands. The enhancement in the upslope flow is closely related to African easterly waves propagating off the continent that generate low-level cyclonic vorticity and convergence. Numerical simulations reproduce the observed rainfall maximum and indicate that it weakens if the African topography is reduced.
Air conditioners and summer maximum electricity consumption in the PD ED Belgrade
Vrcelj Nada
2011-01-01
Full Text Available The paper presents an analysis of the impact of consumption of air conditioning in the form of daily consumption diagram as well as their impact on the achieved power consumption maximum during the summer period. Three cases were observed, regarding 10 kV cables, that supply with electricity mainly: the commercial sector, residential area that does not use electricity for heating and residential area that uses electricity for winter heating. At the same time the winter maximum in the each of the observed cases, as well as the possibility of exceeding the allowable current loads on the routes of monitored 10 kV cables are analyzed.
Andra Naresh Kumar Reddy; Dasari Karuna Sagar
2015-01-01
Resolution for the modified point spread function (PSF) of asymmetrically apodized optical systems has been analysed by a new parameter half-width at half-maximum (HWHM) in addition to the well-defined parameter full-width at half-maximum (FWHM). The distribution of half-maximum energy in the centroid of modified PSF has been investigated in terms of HWHM on good side and HWHM on bad side. We observed that as the asymmetry in PSF increases, FWHM of the main peak increases and then decreases and is being aided by the degree of amplitude apodization in the central region of slit functions. In the present study, HWHM (half-width at half-maximum) of the resultant PSF has been defined to characterize the resolution of the detection system. It is essentially a line of projection, which measures the width of the main lobe at its half-maximum position from the diffraction centre and has been computed for various amplitudes and antiphase apodizations of the slit aperture. We have noticed that HWHM on the good side decreases at the cost of the increased HWHM on the bad side in the presence of asymmetric apodization.
A Note on k-Limited Maximum Base
Yang Ruishun; Yang Xiaowei
2006-01-01
The problem of k-limited maximum base was specified into two special problems of k-limited maximum base; that is, let subset D of the problem of k-limited maximum base be an independent set and a circuit of the matroid, respectively. It was proved that under this circumstance the collections of k-limited base satisfy base axioms. Then a new matroid was determined, and the problem of k-limited maximum base was transformed to the problem of maximum base of this new matroid. Aiming at the problem, two algorithms, which in essence are greedy algorithms based on former matroid, were presented for the two special problems of k-limited maximum base. They were proved to be reasonable and more efficient than the algorithm presented by Ma Zhongfan in view of the complexity of algorithm.
Impact of soil moisture on extreme maximum temperatures in Europe
Kirien Whan
2015-09-01
Full Text Available Land-atmosphere interactions play an important role for hot temperature extremes in Europe. Dry soils may amplify such extremes through feedbacks with evapotranspiration. While previous observational studies generally focused on the relationship between precipitation deficits and the number of hot days, we investigate here the influence of soil moisture (SM on summer monthly maximum temperatures (TXx using water balance model-based SM estimates (driven with observations and temperature observations. Generalized extreme value distributions are fitted to TXx using SM as a covariate. We identify a negative relationship between SM and TXx, whereby a 100 mm decrease in model-based SM is associated with a 1.6 °C increase in TXx in Southern-Central and Southeastern Europe. Dry SM conditions result in a 2–4 °C increase in the 20-year return value of TXx compared to wet conditions in these two regions. In contrast with SM impacts on the number of hot days (NHD, where low and high surface-moisture conditions lead to different variability, we find a mostly linear dependency of the 20-year return value on surface-moisture conditions. We attribute this difference to the non-linear relationship between TXx and NHD that stems from the threshold-based calculation of NHD. Furthermore the employed SM data and the Standardized Precipitation Index (SPI are only weakly correlated in the investigated regions, highlighting the importance of evapotranspiration and runoff for resulting SM. Finally, in a case study for the hot 2003 summer we illustrate that if 2003 spring conditions in Southern-Central Europe had been as dry as in the more recent 2011 event, temperature extremes in summer would have been higher by about 1 °C, further enhancing the already extreme conditions which prevailed in that year.
An Interval Maximum Entropy Method for Quadratic Programming Problem
RUI Wen-juan; CAO De-xin; SONG Xie-wu
2005-01-01
With the idea of maximum entropy function and penalty function methods, we transform the quadratic programming problem into an unconstrained differentiable optimization problem, discuss the interval extension of the maximum entropy function, provide the region deletion test rules and design an interval maximum entropy algorithm for quadratic programming problem. The convergence of the method is proved and numerical results are presented. Both theoretical and numerical results show that the method is reliable and efficient.
Hutchinson, Thomas H. [Plymouth Marine Laboratory, Prospect Place, The Hoe, Plymouth PL1 3DH (United Kingdom)], E-mail: thom1@pml.ac.uk; Boegi, Christian [BASF SE, Product Safety, GUP/PA, Z470, 67056 Ludwigshafen (Germany); Winter, Matthew J. [AstraZeneca Safety, Health and Environment, Brixham Environmental Laboratory, Devon TQ5 8BA (United Kingdom); Owens, J. Willie [The Procter and Gamble Company, Central Product Safety, 11810 East Miami River Road, Cincinnati, OH 45252 (United States)
2009-02-19
There is increasing recognition of the need to identify specific sublethal effects of chemicals, such as reproductive toxicity, and specific modes of actions of the chemicals, such as interference with the endocrine system. To achieve these aims requires criteria which provide a basis to interpret study findings so as to separate these specific toxicities and modes of action from not only acute lethality per se but also from severe inanition and malaise that non-specifically compromise reproductive capacity and the response of endocrine endpoints. Mammalian toxicologists have recognized that very high dose levels are sometimes required to elicit both specific adverse effects and present the potential of non-specific 'systemic toxicity'. Mammalian toxicologists have developed the concept of a maximum tolerated dose (MTD) beyond which a specific toxicity or action cannot be attributed to a test substance due to the compromised state of the organism. Ecotoxicologists are now confronted by a similar challenge and must develop an analogous concept of a MTD and the respective criteria. As examples of this conundrum, we note recent developments in efforts to validate protocols for fish reproductive toxicity and endocrine screens (e.g. some chemicals originally selected as 'negatives' elicited decreases in fecundity or changes in endpoints intended to be biomarkers for endocrine modes of action). Unless analogous criteria can be developed, the potentially confounding effects of systemic toxicity may then undermine the reliable assessment of specific reproductive effects or biomarkers such as vitellogenin or spiggin. The same issue confronts other areas of aquatic toxicology (e.g., genotoxicity) and the use of aquatic animals for preclinical assessments of drugs (e.g., use of zebrafish for drug safety assessment). We propose that there are benefits to adopting the concept of an MTD for toxicology and pharmacology studies using fish and other aquatic
Integer Programming Model for Maximum Clique in Graph
YUAN Xi-bo; YANG You; ZENG Xin-hai
2005-01-01
The maximum clique or maximum independent set of graph is a classical problem in graph theory. Combined with Boolean algebra and integer programming, two integer programming models for maximum clique problem,which improve the old results were designed in this paper. Then, the programming model for maximum independent set is a corollary of the main results. These two models can be easily applied to computer algorithm and software, and suitable for graphs of any scale. Finally the models are presented as Lingo algorithms, verified and compared by several examples.
Counterexamples to convergence theorem of maximum-entropy clustering algorithm
于剑; 石洪波; 黄厚宽; 孙喜晨; 程乾生
2003-01-01
In this paper, we surveyed the development of maximum-entropy clustering algorithm, pointed out that the maximum-entropy clustering algorithm is not new in essence, and constructed two examples to show that the iterative sequence given by the maximum-entropy clustering algorithm may not converge to a local minimum of its objective function, but a saddle point. Based on these results, our paper shows that the convergence theorem of maximum-entropy clustering algorithm put forward by Kenneth Rose et al. does not hold in general cases.
Preliminary investigation on the relation between maximum wave height and wave spectra
Tao, Aifeng; Wen, Cheng; Wu, Yuqing; Wu, Haoran; Li, Shuo; Cao, Guangsui
2016-04-01
The maximum wave height is important not only for the determination of design wave parameters but also for the marine disaster defense. While it cannot be predicted straightforwardly at present, since the general numerical models for wave forecasting are all based on phase averaged spectra model. Then it becomes very useful to make clear the relationship between the maximum wave height and wave spectra parameters, such as average wave steepness, spectra width and spectra type, such as one single peak spectra or multi peaks spectra. In order to perform this research procedure, plenty of observed wave data are required. We collected ten years wave data measured from a ship in North Sea, one year wave pressure data from nine points around Korea, four years buoy data from three points along Chinese coast. The preliminary investigation results on the relations between maximum waves and spectra via the mention observed data will be present here.
The Multi-Mission Maximum Likelihood framework (3ML)
Vianello, Giacomo; Younk, Patrick; Tibaldo, Luigi; Burgess, James M; Ayala, Hugo; Harding, Patrick; Hui, Michelle; Omodei, Nicola; Zhou, Hao
2015-01-01
Astrophysical sources are now observed by many different instruments at different wavelengths, from radio to high-energy gamma-rays, with an unprecedented quality. Putting all these data together to form a coherent view, however, is a very difficult task. Each instrument has its own data format, software and analysis procedure, which are difficult to combine. It is for example very challenging to perform a broadband fit of the energy spectrum of the source. The Multi-Mission Maximum Likelihood framework (3ML) aims to solve this issue, providing a common framework which allows for a coherent modeling of sources using all the available data, independent of their origin. At the same time, thanks to its architecture based on plug-ins, 3ML uses the existing official software of each instrument for the corresponding data in a way which is transparent to the user. 3ML is based on the likelihood formalism, in which a model summarizing our knowledge about a particular region of the sky is convolved with the instrument...
Investigation of Maximum Power Point Tracking for Thermoelectric Generators
Phillip, Navneesh; Maganga, Othman; Burnham, Keith J.; Ellis, Mark A.; Robinson, Simon; Dunn, Julian; Rouaud, Cedric
2013-07-01
In this paper, a thermoelectric generator (TEG) model is developed as a tool for investigating optimized maximum power point tracking (MPPT) algorithms for TEG systems within automotive exhaust heat energy recovery applications. The model comprises three main subsystems that make up the TEG system: the heat exchanger, thermoelectric material, and power conditioning unit (PCU). In this study, two MPPT algorithms known as the perturb and observe (P&O) algorithm and extremum seeking control (ESC) are investigated. A synchronous buck-boost converter is implemented as the preferred DC-DC converter topology, and together with the MPPT algorithm completes the PCU architecture. The process of developing the subsystems is discussed, and the advantage of using the MPPT controller is demonstrated. The simulation results demonstrate that the ESC algorithm implemented in combination with a synchronous buck-boost converter achieves favorable power outputs for TEG systems. The appropriateness is by virtue of greater responsiveness to changes in the system's thermal conditions and hence the electrical potential difference generated in comparison with the P&O algorithm. The MATLAB/Simulink environment is used for simulation of the TEG system and comparison of the investigated control strategies.
Physics-based estimates of maximum magnitude of induced earthquakes
Ampuero, Jean-Paul; Galis, Martin; Mai, P. Martin
2016-04-01
In this study, we present new findings when integrating earthquake physics and rupture dynamics into estimates of maximum magnitude of induced seismicity (Mmax). Existing empirical relations for Mmax lack a physics-based relation between earthquake size and the characteristics of the triggering stress perturbation. To fill this gap, we extend our recent work on the nucleation and arrest of dynamic ruptures derived from fracture mechanics theory. There, we derived theoretical relations between the area and overstress of overstressed asperity and the ability of ruptures to either stop spontaneously (sub-critical ruptures) or runaway (super-critical ruptures). These relations were verified by comparison with simulation and laboratory results, namely 3D dynamic rupture simulations on faults governed by slip-weakening friction, and laboratory experiments of frictional sliding nucleated by localized stresses. Here, we apply and extend these results to situations that are representative for the induced seismicity environment. We present physics-based predictions of Mmax on a fault intersecting cylindrical reservoir. We investigate Mmax dependence on pore-pressure variations (by varying reservoir parameters), frictional parameters and stress conditions of the fault. We also derive Mmax as a function of injected volume. Our approach provides results that are consistent with observations but suggests different scaling with injected volume than that of empirical relation by McGarr, 2014.
The maximum contribution to reionization from metal-free stars
Rozas, J M; Salvador-Solé, E; Rozas, Jose M.; Miralda-Escude, Jordi; Salvador-Sole, Eduard
2005-01-01
We estimate the maximum contribution to reionization from the first generation of massive stars, with zero metallicity, under the assumption that one of these stars forms with a fixed mass in every collapsed halo in which metal-free gas is able to cool. We assume that any halo that has already had stars previously formed in one of their halo progenitors will form only stars with metals, which are assigned an emissivity of ionizing radiation equal to that determined at z=4 from the measured intensity of the ionizing background. We examine the impact of molecular hydrogen photodissociation (which tends to reduce cooling when a photodissociating background is produced by the first stars) and X-Ray photoheating (which heats the atomic medium, raising the entropy of the gas before it collapses into halos). We find that in the CDM$\\Lambda$ model supported by present observations, and even assuming no negative feedbacks for the formation of metal-free stars, a reionized mass fraction of 50% is not reached until reds...
Maximum likelihood pedigree reconstruction using integer linear programming.
Cussens, James; Bartlett, Mark; Jones, Elinor M; Sheehan, Nuala A
2013-01-01
Large population biobanks of unrelated individuals have been highly successful in detecting common genetic variants affecting diseases of public health concern. However, they lack the statistical power to detect more modest gene-gene and gene-environment interaction effects or the effects of rare variants for which related individuals are ideally required. In reality, most large population studies will undoubtedly contain sets of undeclared relatives, or pedigrees. Although a crude measure of relatedness might sometimes suffice, having a good estimate of the true pedigree would be much more informative if this could be obtained efficiently. Relatives are more likely to share longer haplotypes around disease susceptibility loci and are hence biologically more informative for rare variants than unrelated cases and controls. Distant relatives are arguably more useful for detecting variants with small effects because they are less likely to share masking environmental effects. Moreover, the identification of relatives enables appropriate adjustments of statistical analyses that typically assume unrelatedness. We propose to exploit an integer linear programming optimisation approach to pedigree learning, which is adapted to find valid pedigrees by imposing appropriate constraints. Our method is not restricted to small pedigrees and is guaranteed to return a maximum likelihood pedigree. With additional constraints, we can also search for multiple high-probability pedigrees and thus account for the inherent uncertainty in any particular pedigree reconstruction. The true pedigree is found very quickly by comparison with other methods when all individuals are observed. Extensions to more complex problems seem feasible.
Combining Experiments and Simulations Using the Maximum Entropy Principle
Boomsma, Wouter; Ferkinghoff-Borg, Jesper; Lindorff-Larsen, Kresten
2014-01-01
are not in quantitative agreement with experimental data. The principle of maximum entropy is a general procedure for constructing probability distributions in the light of new data, making it a natural tool in cases when an initial model provides results that are at odds with experiments. The number of maximum entropy...
49 CFR 174.86 - Maximum allowable operating speed.
2010-10-01
... 49 Transportation 2 2010-10-01 2010-10-01 false Maximum allowable operating speed. 174.86 Section... operating speed. (a) For molten metals and molten glass shipped in packagings other than those prescribed in § 173.247 of this subchapter, the maximum allowable operating speed may not exceed 24 km/hour (15...
Parametric optimization of thermoelectric elements footprint for maximum power generation
Rezania, A.; Rosendahl, Lasse; Yin, Hao
2014-01-01
The development studies in thermoelectric generator (TEG) systems are mostly disconnected to parametric optimization of the module components. In this study, optimum footprint ratio of n- and p-type thermoelectric (TE) elements is explored to achieve maximum power generation, maximum cost-perform...
30 CFR 56.19066 - Maximum riders in a conveyance.
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum riders in a conveyance. 56.19066 Section 56.19066 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Hoisting Procedures § 56.19066 Maximum riders in a conveyance. In shafts inclined over 45...
30 CFR 57.19066 - Maximum riders in a conveyance.
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum riders in a conveyance. 57.19066 Section 57.19066 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Hoisting Procedures § 57.19066 Maximum riders in a conveyance. In shafts inclined over 45...
Maximum Atmospheric Entry Angle for Specified Retrofire Impulse
T. N. Srivastava
1969-07-01
Full Text Available Maximum atmospheric entry angles for vehicles initially moving in elliptic orbits are investigated and it is shown that tangential retrofire impulse at the apogee results in the maximum entry angle. Equivalence of maximizing the entry angle and minimizing the retrofire impulse is also established.
5 CFR 838.711 - Maximum former spouse survivor annuity.
2010-01-01
... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Maximum former spouse survivor annuity... Orders Awarding Former Spouse Survivor Annuities Limitations on Survivor Annuities § 838.711 Maximum former spouse survivor annuity. (a) Under CSRS, payments under a court order may not exceed the...
46 CFR 151.45-6 - Maximum amount of cargo.
2010-10-01
... 46 Shipping 5 2010-10-01 2010-10-01 false Maximum amount of cargo. 151.45-6 Section 151.45-6 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Operations § 151.45-6 Maximum amount of cargo. (a)...
20 CFR 226.52 - Total annuity subject to maximum.
2010-04-01
... rate effective on the date the supplemental annuity begins, before any reduction for a private pension... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Total annuity subject to maximum. 226.52... COMPUTING EMPLOYEE, SPOUSE, AND DIVORCED SPOUSE ANNUITIES Railroad Retirement Family Maximum § 226.52...
49 CFR 195.406 - Maximum operating pressure.
2010-10-01
... 49 Transportation 3 2010-10-01 2010-10-01 false Maximum operating pressure. 195.406 Section 195... HAZARDOUS LIQUIDS BY PIPELINE Operation and Maintenance § 195.406 Maximum operating pressure. (a) Except for surge pressures and other variations from normal operations, no operator may operate a pipeline at a...
Maximum-entropy clustering algorithm and its global convergence analysis
无
2001-01-01
Constructing a batch of differentiable entropy functions touniformly approximate an objective function by means of the maximum-entropy principle, a new clustering algorithm, called maximum-entropy clustering algorithm, is proposed based on optimization theory. This algorithm is a soft generalization of the hard C-means algorithm and possesses global convergence. Its relations with other clustering algorithms are discussed.
Distribution of maximum loss of fractional Brownian motion with drift
Çağlar, Mine; Vardar-Acar, Ceren
2013-01-01
In this paper, we find bounds on the distribution of the maximum loss of fractional Brownian motion with H >= 1/2 and derive estimates on its tail probability. Asymptotically, the tail of the distribution of maximum loss over [0, t] behaves like the tail of the marginal distribution at time t.
48 CFR 436.575 - Maximum workweek-construction schedule.
2010-10-01
...-construction schedule. 436.575 Section 436.575 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE... Maximum workweek-construction schedule. The contracting officer shall insert the clause at 452.236-75, Maximum Workweek-Construction Schedule, if the clause at FAR 52.236-15 is used and the contractor's...
30 CFR 57.5039 - Maximum permissible concentration.
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum permissible concentration. 57.5039... Maximum permissible concentration. Except as provided by standard § 57.5005, persons shall not be exposed to air containing concentrations of radon daughters exceeding 1.0 WL in active workings. ...
5 CFR 550.105 - Biweekly maximum earnings limitation.
2010-01-01
... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Biweekly maximum earnings limitation. 550.105 Section 550.105 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PAY ADMINISTRATION (GENERAL) Premium Pay Maximum Earnings Limitations § 550.105 Biweekly...
5 CFR 550.106 - Annual maximum earnings limitation.
2010-01-01
... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Annual maximum earnings limitation. 550.106 Section 550.106 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PAY ADMINISTRATION (GENERAL) Premium Pay Maximum Earnings Limitations § 550.106 Annual...
32 CFR 842.35 - Depreciation and maximum allowances.
2010-07-01
... 32 National Defense 6 2010-07-01 2010-07-01 false Depreciation and maximum allowances. 842.35... LITIGATION ADMINISTRATIVE CLAIMS Personnel Claims (31 U.S.C. 3701, 3721) § 842.35 Depreciation and maximum allowances. The military services have jointly established the “Allowance List-Depreciation Guide”...
Accelerated maximum likelihood parameter estimation for stochastic biochemical systems
Daigle Bernie J
2012-05-01
Full Text Available Abstract Background A prerequisite for the mechanistic simulation of a biochemical system is detailed knowledge of its kinetic parameters. Despite recent experimental advances, the estimation of unknown parameter values from observed data is still a bottleneck for obtaining accurate simulation results. Many methods exist for parameter estimation in deterministic biochemical systems; methods for discrete stochastic systems are less well developed. Given the probabilistic nature of stochastic biochemical models, a natural approach is to choose parameter values that maximize the probability of the observed data with respect to the unknown parameters, a.k.a. the maximum likelihood parameter estimates (MLEs. MLE computation for all but the simplest models requires the simulation of many system trajectories that are consistent with experimental data. For models with unknown parameters, this presents a computational challenge, as the generation of consistent trajectories can be an extremely rare occurrence. Results We have developed Monte Carlo Expectation-Maximization with Modified Cross-Entropy Method (MCEM2: an accelerated method for calculating MLEs that combines advances in rare event simulation with a computationally efficient version of the Monte Carlo expectation-maximization (MCEM algorithm. Our method requires no prior knowledge regarding parameter values, and it automatically provides a multivariate parameter uncertainty estimate. We applied the method to five stochastic systems of increasing complexity, progressing from an analytically tractable pure-birth model to a computationally demanding model of yeast-polarization. Our results demonstrate that MCEM2 substantially accelerates MLE computation on all tested models when compared to a stand-alone version of MCEM. Additionally, we show how our method identifies parameter values for certain classes of models more accurately than two recently proposed computationally efficient methods
Mechanisms of maximum information preservation in the Drosophila antennal lobe.
Ryota Satoh
Full Text Available We examined the presence of maximum information preservation, which may be a fundamental principle of information transmission in all sensory modalities, in the Drosophila antennal lobe using an experimentally grounded network model and physiological data. Recent studies have shown a nonlinear firing rate transformation between olfactory receptor neurons (ORNs and second-order projection neurons (PNs. As a result, PNs can use their dynamic range more uniformly than ORNs in response to a diverse set of odors. Although this firing rate transformation is thought to assist the decoder in discriminating between odors, there are no comprehensive, quantitatively supported studies examining this notion. Therefore, we quantitatively investigated the efficiency of this firing rate transformation from the viewpoint of information preservation by computing the mutual information between odor stimuli and PN responses in our network model. In the Drosophila olfactory system, all ORNs and PNs are divided into unique functional processing units called glomeruli. The nonlinear transformation between ORNs and PNs is formed by intraglomerular transformation and interglomerular interaction through local neurons (LNs. By exploring possible nonlinear transformations produced by these two factors in our network model, we found that mutual information is maximized when a weak ORN input is preferentially amplified within a glomerulus and the net LN input to each glomerulus is inhibitory. It is noteworthy that this is the very combination observed experimentally. Furthermore, the shape of the resultant nonlinear transformation is similar to that observed experimentally. These results imply that information related to odor stimuli is almost maximally preserved in the Drosophila olfactory circuit. We also discuss how intraglomerular transformation and interglomerular inhibition combine to maximize mutual information.
Maximum Principles for Discrete and Semidiscrete Reaction-Diffusion Equation
Petr Stehlík
2015-01-01
Full Text Available We study reaction-diffusion equations with a general reaction function f on one-dimensional lattices with continuous or discrete time ux′ (or Δtux=k(ux-1-2ux+ux+1+f(ux, x∈Z. We prove weak and strong maximum and minimum principles for corresponding initial-boundary value problems. Whereas the maximum principles in the semidiscrete case (continuous time exhibit similar features to those of fully continuous reaction-diffusion model, in the discrete case the weak maximum principle holds for a smaller class of functions and the strong maximum principle is valid in a weaker sense. We describe in detail how the validity of maximum principles depends on the nonlinearity and the time step. We illustrate our results on the Nagumo equation with the bistable nonlinearity.
Experimental study on prediction model for maximum rebound ratio
LEI Wei-dong; TENG Jun; A.HEFNY; ZHAO Jian; GUAN Jiong
2007-01-01
The proposed prediction model for estimating the maximum rebound ratio was applied to a field explosion test, Mandai test in Singapore.The estimated possible maximum Deak particle velocities(PPVs)were compared with the field records.Three of the four available field-recorded PPVs lie exactly below the estimated possible maximum values as expected.while the fourth available field-recorded PPV lies close to and a bit higher than the estimated maximum possible PPV The comparison results show that the predicted PPVs from the proposed prediction model for the maximum rebound ratio match the field.recorded PPVs better than those from two empirical formulae.The very good agreement between the estimated and field-recorded values validates the proposed prediction model for estimating PPV in a rock mass with a set of ipints due to application of a two dimensional compressional wave at the boundary of a tunnel or a borehole.
Leaf Dynamics of Panicum maximum under Future Climatic Changes.
Carlos Henrique Britto de Assis Prado
Full Text Available Panicum maximum Jacq. 'Mombaça' (C4 was grown in field conditions with sufficient water and nutrients to examine the effects of warming and elevated CO2 concentrations during the winter. Plants were exposed to either the ambient temperature and regular atmospheric CO2 (Control; elevated CO2 (600 ppm, eC; canopy warming (+2°C above regular canopy temperature, eT; or elevated CO2 and canopy warming (eC+eT. The temperatures and CO2 in the field were controlled by temperature free-air controlled enhancement (T-FACE and mini free-air CO2 enrichment (miniFACE facilities. The most green, expanding, and expanded leaves and the highest leaf appearance rate (LAR, leaves day(-1 and leaf elongation rate (LER, cm day(-1 were observed under eT. Leaf area and leaf biomass were higher in the eT and eC+eT treatments. The higher LER and LAR without significant differences in the number of senescent leaves could explain why tillers had higher foliage area and leaf biomass in the eT treatment. The eC treatment had the lowest LER and the fewest expanded and green leaves, similar to Control. The inhibitory effect of eC on foliage development in winter was indicated by the fewer green, expanded, and expanding leaves under eC+eT than eT. The stimulatory and inhibitory effects of the eT and eC treatments, respectively, on foliage raised and lowered, respectively, the foliar nitrogen concentration. The inhibition of foliage by eC was confirmed by the eC treatment having the lowest leaf/stem biomass ratio and by the change in leaf biomass-area relationships from linear or exponential growth to rectangular hyperbolic growth under eC. Besides, eC+eT had a synergist effect, speeding up leaf maturation. Therefore, with sufficient water and nutrients in winter, the inhibitory effect of elevated CO2 on foliage could be partially offset by elevated temperatures and relatively high P. maximum foliage production could be achieved under future climatic change.
Leaf Dynamics of Panicum maximum under Future Climatic Changes.
Britto de Assis Prado, Carlos Henrique; Haik Guedes de Camargo-Bortolin, Lívia; Castro, Érique; Martinez, Carlos Alberto
2016-01-01
Panicum maximum Jacq. 'Mombaça' (C4) was grown in field conditions with sufficient water and nutrients to examine the effects of warming and elevated CO2 concentrations during the winter. Plants were exposed to either the ambient temperature and regular atmospheric CO2 (Control); elevated CO2 (600 ppm, eC); canopy warming (+2°C above regular canopy temperature, eT); or elevated CO2 and canopy warming (eC+eT). The temperatures and CO2 in the field were controlled by temperature free-air controlled enhancement (T-FACE) and mini free-air CO2 enrichment (miniFACE) facilities. The most green, expanding, and expanded leaves and the highest leaf appearance rate (LAR, leaves day(-1)) and leaf elongation rate (LER, cm day(-1)) were observed under eT. Leaf area and leaf biomass were higher in the eT and eC+eT treatments. The higher LER and LAR without significant differences in the number of senescent leaves could explain why tillers had higher foliage area and leaf biomass in the eT treatment. The eC treatment had the lowest LER and the fewest expanded and green leaves, similar to Control. The inhibitory effect of eC on foliage development in winter was indicated by the fewer green, expanded, and expanding leaves under eC+eT than eT. The stimulatory and inhibitory effects of the eT and eC treatments, respectively, on foliage raised and lowered, respectively, the foliar nitrogen concentration. The inhibition of foliage by eC was confirmed by the eC treatment having the lowest leaf/stem biomass ratio and by the change in leaf biomass-area relationships from linear or exponential growth to rectangular hyperbolic growth under eC. Besides, eC+eT had a synergist effect, speeding up leaf maturation. Therefore, with sufficient water and nutrients in winter, the inhibitory effect of elevated CO2 on foliage could be partially offset by elevated temperatures and relatively high P. maximum foliage production could be achieved under future climatic change.
Abreu, P.; Aglietta, M.; Ahlers, M.; Ahn, E. J.; Albuquerque, I. F. M.; Allekotte, I.; Allen, J.; Allison, P.; Almela, A.; Alvarez Castillo, J.; Alvarez-Muniz, J.; Alves Batista, R.; Ambrosio, M.; Aminaei, A.; Anchordoqui, L.; Andringa, S.; Anticic, T.; Aramo, C.; Arqueros, F.; Asorey, H.; Assis, P.; Aublin, J.; Ave, M.; Avenier, M.; Avila, G.; Badescu, A. M.; Barber, K. B.; Barbosa, A. F.; Bardenet, R.; Baughman, B.; Baeuml, J.; Baus, C.; Beatty, J. J.; Becker, K.H.; Belletoile, A.; Bellido, J. A.; BenZvi, S.; Berat, C.; Bertou, X.; Biermann, P. L.; Billoir, P.; Blanco, F.; Blanco, M.; Bleve, C.; Bluemer, H.; Bohacova, M.; Boncioli, D.; Bonifazi, C.; Bonino, R.; Borodai, N.; Brack, J.; Brancus, I.; Brogueira, P.; Brown, W. C.; Buchholz, P.; Bueno, A.; Buroker, L.; Burton, R. E.; Buscemi, M.; Caballero-Mora, K. S.; Caccianiga, B.; Caccianiga, L.; Caramete, L.; Caruso, R.; Castellina, A.; Cataldi, G.; Cazon, L.; Cester, R.; Cheng, S.H.; Chiavassa, A.; Chinellato, J. A.; Chudoba, J.; Cilmo, M.; Clay, R. W.; Cocciolo, G.; Colalillo, R.; Collica, L.; Coluccia, M. R.; Conceicao, R.; Contreras, F.; Cook, H.; Cooper, M. J.; Coppens, J.; Coutu, S.; Covault, C. E.; Criss, A.; Cronin, J.; Curutiu, A.; Dallier, R.; Daniel, B.; Dasso, S.; Daumiller, K.; Dawson, B. R.; de Almeida, R.M.; De Domenico, M.; de Jong, S. J.; De La Vega, G.; de Mello Junior, W. J. M.; de Mello Neto, J. R. T.; De Mitri, I.; de Souza, V.; de Vries, K. D.; del Peral, L.; Deligny, O.; Dembinski, H.; Dhital, N.; Di Giulio, C.; Diaz, J. C.; Diaz Castro, M. L.; Diep, P. N.; Diogo, F.; Dobrigkeit, C.; Docters, W.; D'Olivo, J. C.; Dong, P. N.; Dorofeev, A.; dos Anjos, J. C.; Dova, M. T.; D'Urso, D.; Ebr, J.; Engel, R.; Erdmann, M.; Escobar, C. O.; Espadanal, J.; Etchegoyen, A.; San Luis, P. Facal; Falcke, H.; Fang, K.; Farrar, G.; Fauth, A. C.; Fazzini, N.; Ferguson, A. P.; Fick, B.; Figueira, J. M.; Filevich, A.; Filipcic, A.; Fliescher, S.; Fox, B. D.; Fracchiolla, C. E.; Fraenkel, E. D.; Fratu, O.; Froehlich, U.; Fuchs, B.; Gaior, R.; Gamarra, R. F.; Gambetta, S.; Garcia, B.; Garcia Roca, S. T.; Garcia-Gamez, D.; Garcia-Pinto, D.; Garilli, G.; Gascon Bravo, A.; Gemmeke, H.; Ghia, P. L.; Giller, M.; Gitto, J.; Glaser, C.; Glass, H.; Golup, G.; Gomez Albarracin, F.; Gomez Berisso, M.; Gomez Vitale, P. F.; Goncalves, P.; Gonzalez, J. G.; Gookin, B.; Gorgi, A.; Gorham, P.; Gouffon, P.; Grebe, S.; Griffith, N.; Grillo, A. F.; Grubb, T. D.; Guardincerri, Y.; Guarino, F.; Guedes, G. P.; Hansen, P.; Harari, D.; Harrison, T. A.; Harton, J. L.; Haungs, A.; Hebbeker, T.; Heck, D.; Herve, A. E.; Hill, G. C.; Hojvat, C.; Hollon, N.; Holmes, V. C.; Homola, P.; Horandel, J. R.; Horvath, P.; Hrabovsky, M.; Huber, D.; Huege, T.; Insolia, A.; Ionita, F.; Jansen, S.; Jarne, C.; Jiraskova, S.; Josebachuili, M.; Kadija, K.; Kampert, K. H.; Karhan, P.; Kasper, P.; Katkov, I.; Kegl, B.; Keilhauer, B.; Keivani, A.; Kelley, J. L.; Kemp, E.; Kieckhafer, R. M.; Klages, H. O.; Kleifges, M.; Kleinfeller, J.; Knapp, J.; Kotera, K.; Krause, R.; Krohm, N.; Kroemer, O.; Kruppke-Hansen, D.; Kuempel, D.; Kulbartz, J. K.; Kunka, N.; La Rosa, G.; LaHurd, D.; Latronico, L.; Lauer, R.; Lauscher, M.; Lautridou, P.; Le Coz, S.; Leao, M. S. A. B.; Lebrun, D.; Lebrun, P.; Leigui de Oliveira, M. A.; Letessier-Selvon, A.; Lhenry-Yvon, I.; Link, K.; Lopez, R.; Lopez Aguera, A.; Louedec, K.; Lozano Bahilo, J.; Lu, L.; Lucero, A.; Ludwig, M.; Lyberis, H.; Maccarone, M. C.; Macolino, C.; Malacari, M.; Maldera, S.; Maller, J.; Mandat, D.; Mantsch, P.; Mariazzi, A. G.; Marin, J.; Marin, V.; Maris, I. C.; Marquez Falcon, H. R.; Marsella, G.; Martello, D.; Martinez, H.; Martinez Bravo, O.; Martraire, D.; Masias Meza, J. J.; Mathes, H. J.; Matthews, J.; Matthews, J. A. J.; Matthiae, G.; Maurel, D.; Maurizio, D.; Mayotte, E.; Mazur, P. O.; Medina-Tanco, G.; Melissas, M.; Melo, D.; Menichetti, E.; Menshikov, A.; Messina, S.; Meyhandan, R.; Micanovic, S.; Micheletti, M. I.; Middendorf, L.; Minaya, I. A.; Miramonti, L.; Mitrica, B.; Molina-Bueno, L.; Mollerach, S.; Monasor, M.; Ragaigne, D. Monnier; Montanet, F.; Morales, B.; Morello, C.; Moreno, J. C.; Mostafa, M.; Moura, C. A.; Muller, M. A.; Mueller, G.; Muenchmeyer, M.; Mussa, R.; Navarra, G.; Navarro, J. L.; Navas, S.; Necesal, P.; Nellen, L.; Nelles, A.; Neuser, J.; Nhung, P. T.; Niechciol, M.; Niemietz, L.; Nierstenhoefer, N.; Niggemann, T.; Nitz, D.; Nosek, D.; Nozka, L.; Oehlschlaeger, J.; Olinto, A.; Oliveira, M.; Ortiz, M.; Pacheco, N.; Pakk Selmi-Dei, D.; Palatka, M.; Pallotta, J.; Palmieri, N.; Parente, G.; Parra, A.; Pastor, S.; Paul, T.; Pech, M.; Pekala, J.; Pelayo, R.; Pepe, I. M.; Perrone, L.; Pesce, R.; Petermann, E.; Petrera, S.; Petrolini, A.; Petrov, Y.; Pfendner, C.; Piegaia, R.; Pierog, T.; Pieroni, P.; Pimenta, M.; Pirronello, V.; Platino, M.; Plum, M.; Ponce, V. H.; Pontz, M.; Porcelli, A.; Privitera, P.; Prouza, M.; Quel, E. J.; Querchfeld, S.; Rautenberg, J.; Ravel, O.; Ravignani, D.; Revenu, B.; Ridky, J.; Riggi, S.; Risse, M.; Ristori, P.; Rivera, H.; Rizi, V.; Roberts, J.; Rodrigues de Carvalho, W.; Rodriguez Cabo, I.; Rodriguez Fernandez, G.; Rodriguez Martino, J.; Rodriguez Rojo, J.; Rodriguez-Frias, M. D.; Ros, G.; Rosado, J.; Rossler, T.; Roth, M.; Rouille-d'Orfeuil, B.; Roulet, E.; Rovero, A. C.; Ruehle, C.; Saffi, S. J.; Saftoiu, A.; Salamida, F.; Salazar, H.; Greus, F. Salesa; Salina, G.; Sanchez, F.; Santo, C. E.; Santos, E.; Santos, E. M.; Sarazin, F.; Sarkar, B.; Sato, R.; Scharf, N.; Scherini, V.; Schieler, H.; Schiffer, P.; Schmidt, A.; Scholten, O.; Schoorlemmer, H.; Schovancova, J.; Schovanek, P.; Schroeder, F.; Schulz, J.; Schuster, D.; Sciutto, S. J.; Scuderi, M.; Segreto, A.; Settimo, M.; Shadkam, A.; Shellard, R. C.; Sidelnik, I.; Sigl, G.; Sima, O.; Smialkowski, A.; Smida, R.; Snow, G. R.; Sommers, P.; Sorokin, J.; Spinka, H.; Squartini, R.; Srivastava, Y. N.; Stanic, S.; Stapleton, J.; Stasielak, J.; Stephan, M.; Straub, M.; Stutz, A.; Suarez, F.; Suomijaervi, T.; Supanitsky, A. D.; Susa, T.; Sutherland, M. S.; Swain, J.; Szadkowski, Z.; Szuba, M.; Tapia, A.; Tartare, M.; Tascau, O.; Tcaciuc, R.; Thao, N. T.; Thomas, D.; Tiffenberg, J.; Timmermans, C.; Tkaczyk, W.; Todero Peixoto, C. J.; Toma, G.; Tomankova, L.; Tome, B.; Tonachini, A.; Torralba Elipe, G.; Machado, D. Torres; Travnicek, P.; Tridapalli, D. B.; Trovato, E.; Tueros, M.; Ulrich, R.; Unger, M.; Urban, M.; Valdes Galicia, J. F.; Valino, I.; Valore, L.; van Aar, G.; van den Berg, A. M.; van Velzen, S.; van Vliet, A.; Varela, E.; Vargas Cardenas, B.; Varner, G.; Vazquez, J. R.; Vazquez, R. A.; Veberic, D.; Verzi, V.; Vicha, J.; Videla, M.; Villasenor, L.; Wahlberg, H.; Wahrlich, P.; Wainberg, O.; Walz, D.; Watson, A. A.; Weber, M.; Weidenhaupt, K.; Weindl, A.; Werner, F.; Westerhoff, S.; Whelan, B. J.; Widom, A.; Wieczorek, G.; Wiencke, L.; Wilczynska, B.; Wilczynski, H.; Will, M.; Williams, C.; Winchen, T.; Wommer, M.; Wundheiler, B.; Yamamoto, T.; Yapici, T.; Younk, P.; Yuan, G.; Yushkov, A.; Zamorano Garcia, B.; Zas, E.; Zavrtanik, D.; Zavrtanik, M.; Zaw, I.; Zepeda, A.; Zhou, J.; Zhu, Y.; Zimbres Silva, M.; Ziolkowski, M.; Martin, L.
2013-01-01
To interpret the mean depth of cosmic ray air shower maximum and its dispersion, we parametrize those two observables as functions of the first two moments of the ln A distribution. We examine the goodness of this simple method through simulations of test mass distributions. The application of the p
Brus, D.J.; Bogaert, P.; Heuvelink, G.B.M.
2008-01-01
Bayesian Maximum Entropy was used to estimate the probabilities of occurrence of soil categories in the Netherlands, and to simulate realizations from the associated multi-point pdf. Besides the hard observations (H) of the categories at 8369 locations, the soil map of the Netherlands 1:50 000 was u
Maximum Likelihood Estimation of Nonlinear Structural Equation Models with Ignorable Missing Data
Lee, Sik-Yum; Song, Xin-Yuan; Lee, John C. K.
2003-01-01
The existing maximum likelihood theory and its computer software in structural equation modeling are established on the basis of linear relationships among latent variables with fully observed data. However, in social and behavioral sciences, nonlinear relationships among the latent variables are important for establishing more meaningful models…
Measurement of the depth of maximum of extensive air showers above 1018eV
Abraham, J.; Abreu, P.; Aglietta, M.; Ahn, E. J.; Allard, D.; Allekotte, I.; Allen, J.; Alvarez-Muñiz, J.; Ambrosio, M.; Anchordoqui, L.; Andringa, S.; Antičić, T.; Anzalone, A.; Aramo, C.; Arganda, E.; Arisaka, K.; Arqueros, F.; Asorey, H.; Assis, P.; Aublin, J.; Ave, M.; Avila, G.; Bäcker, T.; Badagnani, D.; Balzer, M.; Barber, K. B.; Barbosa, A. F.; Barroso, S. L. C.; Baughman, B.; Bauleo, P.; Beatty, J. J.; Becker, B. R.; Becker, K. H.; Bellétoile, A.; Bellido, J. A.; Benzvi, S.; Berat, C.; Bergmann, T.; Bertou, X.; Biermann, P. L.; Billoir, P.; Blanch-Bigas, O.; Blanco, F.; Blanco, M.; Bleve, C.; Blümer, H.; Boháčová, M.; Boncioli, D.; Bonifazi, C.; Bonino, R.; Borodai, N.; Brack, J.; Brogueira, P.; Brown, W. C.; Bruijn, R.; Buchholz, P.; Bueno, A.; Burton, R. E.; Busca, N. G.; Caballero-Mora, K. S.; Caramete, L.; Caruso, R.; Castellina, A.; Catalano, O.; Cataldi, G.; Cazon, L.; Cester, R.; Chauvin, J.; Chiavassa, A.; Chinellato, J. A.; Chou, A.; Chudoba, J.; Clay, R. W.; Colombo, E.; Coluccia, M. R.; Conceição, R.; Contreras, F.; Cook, H.; Cooper, M. J.; Coppens, J.; Cordier, A.; Cotti, U.; Coutu, S.; Covault, C. E.; Creusot, A.; Criss, A.; Cronin, J.; Curutiu, A.; Dagoret-Campagne, S.; Dallier, R.; Daumiller, K.; Dawson, B. R.; de Almeida, R. M.; de Domenico, M.; de Donato, C.; de Jong, S. J.; de La Vega, G.; de Mello Junior, W. J. M.; de Mello Neto, J. R. T.; de Mitri, I.; de Souza, V.; de Vries, K.D.; Decerprit, G.; Del Peral, L.; Deligny, O.; Della Selva, A.; Delle Fratte, C.; Dembinski, H.; di Giulio, C.; Diaz, J. C.; Díaz Castro, M. L.; Diep, P. N.; Dobrigkeit, C.; D'Olivo, J. C.; Dong, P. N.; Dorofeev, A.; Dos Anjos, J. C.; Dova, M. T.; D'Urso, D.; Dutan, I.; Duvernois, M. A.; Ebr, J.; Engel, R.; Erdmann, M.; Escobar, C. O.; Etchegoyen, A.; Facal San Luis, P.; Falcke, H.; Farrar, G.; Fauth, A. C.; Fazzini, N.; Ferrero, A.; Fick, B.; Filevich, A.; Filipčič, A.; Fleck, I.; Fliescher, S.; Fracchiolla, C. E.; Fraenkel, E. D.; Fröhlich, U.; Fulgione, W.; Gamarra, R. F.; Gambetta, S.; García, B.; García Gámez, D.; Garcia-Pinto, D.; Garrido, X.; Gelmini, G.; Gemmeke, H.; Ghia, P. L.; Giaccari, U.; Giller, M.; Glass, H.; Goggin, L. M.; Gold, M. S.; Golup, G.; Gomez Albarracin, F.; Gómez Berisso, M.; Gonçalves, P.; Gonzalez, D.; Gonzalez, J. G.; Góra, D.; Gorgi, A.; Gouffon, P.; Gozzini, S. R.; Grashorn, E.; Grebe, S.; Grigat, M.; Grillo, A. F.; Guardincerri, Y.; Guarino, F.; Guedes, G. P.; Hague, J. D.; Halenka, V.; Hansen, P.; Harari, D.; Harmsma, S.; Harton, J. L.; Haungs, A.; Hebbeker, T.; Heck, D.; Herve, A. E.; Hojvat, C.; Holmes, V. C.; Homola, P.; Hörandel, J. R.; Horneffer, A.; Hrabovský, M.; Huege, T.; Hussain, M.; Iarlori, M.; Insolia, A.; Ionita, F.; Italiano, A.; Jiraskova, S.; Kadija, K.; Kaducak, M.; Kampert, K. H.; Karova, T.; Kasper, P.; Kégl, B.; Keilhauer, B.; Keivani, A.; Kelley, J.; Kemp, E.; Kieckhafer, R. M.; Klages, H. O.; Kleifges, M.; Kleinfeller, J.; Knapik, R.; Knapp, J.; Koang, D.-H.; Krieger, A.; Krömer, O.; Kruppke-Hansen, D.; Kuehn, F.; Kuempel, D.; Kulbartz, K.; Kunka, N.; Kusenko, A.; La Rosa, G.; Lachaud, C.; Lago, B. L.; Lautridou, P.; Leão, M. S. A. B.; Lebrun, D.; Lebrun, P.; Lee, J.; Leigui de Oliveira, M. A.; Lemiere, A.; Letessier-Selvon, A.; Lhenry-Yvon, I.; López, R.; Lopez Agüera, A.; Louedec, K.; Lozano Bahilo, J.; Lucero, A.; Ludwig, M.; Lyberis, H.; Maccarone, M. C.; Macolino, C.; Maldera, S.; Mandat, D.; Mantsch, P.; Mariazzi, A. G.; Marin, V.; Maris, I. C.; Marquez Falcon, H. R.; Marsella, G.; Martello, D.; Martínez Bravo, O.; Mathes, H. J.; Matthews, J.; Matthews, J. A. J.; Matthiae, G.; Maurizio, D.; Mazur, P. O.; McEwen, M.; Medina-Tanco, G.; Melissas, M.; Melo, D.; Menichetti, E.; Menshikov, A.; Meurer, C.; Mičanović, S.; Micheletti, M. I.; Miller, W.; Miramonti, L.; Mollerach, S.; Monasor, M.; Monnier Ragaigne, D.; Montanet, F.; Morales, B.; Morello, C.; Moreno, E.; Moreno, J. C.; Morris, C.; Mostafá, M.; Mueller, S.; Muller, M. A.; Mussa, R.; Navarra, G.; Navarro, J. L.; Navas, S.; Necesal, P.; Nellen, L.; Nhung, P. T.; Nierstenhoefer, N.; Nitz, D.; Nosek, D.; Nožka, L.; Nyklicek, M.; Oehlschläger, J.; Olinto, A.; Oliva, P.; Olmos-Gilbaja, V. M.; Ortiz, M.; Pacheco, N.; Pakk Selmi-Dei, D.; Palatka, M.; Pallotta, J.; Palmieri, N.; Parente, G.; Parizot, E.; Parlati, S.; Parra, A.; Parrisius, J.; Parsons, R. D.; Pastor, S.; Paul, T.; Pavlidou, V.; Payet, K.; Pech, M.; Pękala, J.; Pelayo, R.; Pepe, I. M.; Perrone, L.; Pesce, R.; Petermann, E.; Petrera, S.; Petrinca, P.; Petrolini, A.; Petrov, Y.; Petrovic, J.; Pfendner, C.; Piegaia, R.; Pierog, T.; Pimenta, M.; Pirronello, V.; Platino, M.; Ponce, V. H.; Pontz, M.; Privitera, P.; Prouza, M.; Quel, E. J.; Rautenberg, J.; Ravel, O.; Ravignani, D.; Redondo, A.; Revenu, B.; Rezende, F. A. S.; Ridky, J.; Riggi, S.; Risse, M.; Ristori, P.; Rivière, C.; Rizi, V.; Robledo, C.; Rodriguez, G.; Rodriguez Martino, J.; Rodriguez Rojo, J.; Rodriguez-Cabo, I.; Rodríguez-Frías, M. D.; Ros, G.; Rosado, J.; Rossler, T.; Roth, M.; Rouillé-D'Orfeuil, B.; Roulet, E.; Rovero, A. C.; Salamida, F.; Salazar, H.; Salina, G.; Sánchez, F.; Santander, M.; Santo, C. E.; Santos, E.; Santos, E. M.; Sarazin, F.; Sarkar, S.; Sato, R.; Scharf, N.; Scherini, V.; Schieler, H.; Schiffer, P.; Schmidt, A.; Schmidt, F.; Schmidt, T.; Scholten, O.; Schoorlemmer, H.; Schovancova, J.; Schovánek, P.; Schroeder, F.; Schulte, S.; Schüssler, F.; Schuster, D.; Sciutto, S. J.; Scuderi, M.; Segreto, A.; Semikoz, D.; Settimo, M.; Shadkam, A.; Shellard, R. C.; Sidelnik, I.; Siffert, B. B.; Sigl, G.; Śmiałkowski, A.; Šmída, R.; Snow, G. R.; Sommers, P.; Sorokin, J.; Spinka, H.; Squartini, R.; Stasielak, J.; Stephan, M.; Strazzeri, E.; Stutz, A.; Suarez, F.; Suomijärvi, T.; Supanitsky, A. D.; Šuša, T.; Sutherland, M. S.; Swain, J.; Szadkowski, Z.; Tamashiro, A.; Tamburro, A.; Tapia, A.; Tarutina, T.; Taşcău, O.; Tcaciuc, R.; Tcherniakhovski, D.; Tegolo, D.; Thao, N. T.; Thomas, D.; Tiffenberg, J.; Timmermans, C.; Tkaczyk, W.; Todero Peixoto, C. J.; Tomé, B.; Tonachini, A.; Travnicek, P.; Tridapalli, D. B.; Tristram, G.; Trovato, E.; Tueros, M.; Ulrich, R.; Unger, M.; Urban, M.; Valdés Galicia, J. F.; Valiño, I.; Valore, L.; van den Berg, A. M.; Vázquez, J. R.; Vázquez, R. A.; Veberič, D.; Venters, T.; Verzi, V.; Videla, M.; Villaseñor, L.; Vorobiov, S.; Voyvodic, L.; Wahlberg, H.; Wahrlich, P.; Wainberg, O.; Warner, D.; Watson, A. A.; Westerhoff, S.; Whelan, B. J.; Wieczorek, G.; Wiencke, L.; Wilczyńska, B.; Wilczyński, H.; Williams, C.; Winchen, T.; Winnick, M. G.; Wundheiler, B.; Yamamoto, T.; Younk, P.; Yuan, G.; Yushkov, A.; Zas, E.; Zavrtanik, D.; Zavrtanik, M.; Zaw, I.; Zepeda, A.; Ziolkowski, M.; Pierre Auger Collaboration, [No Value
2010-01-01
We describe the measurement of the depth of maximum, Xmax, of the longitudinal development of air showers induced by cosmic rays. Almost 4000 events above 1018eV observed by the fluorescence detector of the Pierre Auger Observatory in coincidence with at least one surface detector station are selec
Finding Quantitative Trait Loci Genes with Collaborative Targeted Maximum Likelihood Learning.
Wang, Hui; Rose, Sherri; van der Laan, Mark J
2011-07-01
Quantitative trait loci mapping is focused on identifying the positions and effect of genes underlying an an observed trait. We present a collaborative targeted maximum likelihood estimator in a semi-parametric model using a newly proposed 2-part super learning algorithm to find quantitative trait loci genes in listeria data. Results are compared to the parametric composite interval mapping approach.
2010-07-01
... as specified in 40 CFR 1065.610. This is the maximum in-use engine speed used for calculating the NOX... procedures of 40 CFR part 1065, based on the manufacturer's design and production specifications for the..., power density, and maximum in-use engine speed. 1042.140 Section 1042.140 Protection of...
Maximum Langmuir Fields in Planetary Foreshocks Determined from the Electrostatic Decay Threshold
Robinson, P. A.; Cairns, Iver H.
1995-01-01
Maximum electric fields of Langmuir waves at planetary foreshocks are estimated from the threshold for electrostatic decay, assuming it saturates beam driven growth, and incorporating heliospheric variation of plasma density and temperature. Comparisons with spacecraft observations yields good quantitative agreement. Observations in type 3 radio sources are also in accord with this interpretation. A single mechanism can thus account for the highest fields of beam driven waves in both contexts.
Exact computation of the maximum-entropy potential of spiking neural-network models.
Cofré, R; Cessac, B
2014-05-01
Understanding how stimuli and synaptic connectivity influence the statistics of spike patterns in neural networks is a central question in computational neuroscience. The maximum-entropy approach has been successfully used to characterize the statistical response of simultaneously recorded spiking neurons responding to stimuli. However, in spite of good performance in terms of prediction, the fitting parameters do not explain the underlying mechanistic causes of the observed correlations. On the other hand, mathematical models of spiking neurons (neuromimetic models) provide a probabilistic mapping between the stimulus, network architecture, and spike patterns in terms of conditional probabilities. In this paper we build an exact analytical mapping between neuromimetic and maximum-entropy models.
THE STRENGTH OF THE DISSOLVED OXYGEN MAXIMUM IN THE VERTICAL DISTRIBUTION OF N ANSHA ISLANDS WATERS
林洪瑛; 程赛伟; 韩舞鹰
2002-01-01
Observation data from a cruise in the Nansha Islands, in May to June 1990, Decem ber, 1993, September to October 1994, and July, 1999, respectively, were used to develop the method presented here to indicate the existing strength of the diss ol ved oxygen maximum in the vertical distribution of Nansha Islands waters. Its se asonal variation and regional distribution are discussed in this paper. Analysis results showed that the distribution of the strength of dissolved oxygen maximum (Domax-Dosur) was closely related to the upper layer circulation and the bioactivity of Nansha Islands seawater.
Control of Hybrid System Using Multi-Input Inverter and Maximum Power Point Tracking
N.Sivakumar
2013-07-01
Full Text Available The objective of this paper is to control the Wind/PV hybrid system using Multi-input inverter to get constant output power for different operating conditions. The MPPT also used in this system to get the maximum peak power to the load. The perturbation observation (P&O method is used to accomplish the maximum power point tracking algorithm for input sources. The operating principle of the open loop and closed loop circuit of multi-input inverter is discussed.
Blind Detection of Ultra-faint Streaks with a Maximum Likelihood Method
Dawson, William A; Kamath, Chandrika
2016-01-01
We have developed a maximum likelihood source detection method capable of detecting ultra-faint streaks with surface brightnesses approximately an order of magnitude fainter than the pixel level noise. Our maximum likelihood detection method is a model based approach that requires no a priori knowledge about the streak location, orientation, length, or surface brightness. This method enables discovery of typically undiscovered objects, and enables the utilization of low-cost sensors (i.e., higher-noise data). The method also easily facilitates multi-epoch co-addition. We will present the results from the application of this method to simulations, as well as real low earth orbit observations.
Maximum-likelihood estimation of haplotype frequencies in nuclear families.
Becker, Tim; Knapp, Michael
2004-07-01
The importance of haplotype analysis in the context of association fine mapping of disease genes has grown steadily over the last years. Since experimental methods to determine haplotypes on a large scale are not available, phase has to be inferred statistically. For individual genotype data, several reconstruction techniques and many implementations of the expectation-maximization (EM) algorithm for haplotype frequency estimation exist. Recent research work has shown that incorporating available genotype information of related individuals largely increases the precision of haplotype frequency estimates. We, therefore, implemented a highly flexible program written in C, called FAMHAP, which calculates maximum likelihood estimates (MLEs) of haplotype frequencies from general nuclear families with an arbitrary number of children via the EM-algorithm for up to 20 SNPs. For more loci, we have implemented a locus-iterative mode of the EM-algorithm, which gives reliable approximations of the MLEs for up to 63 SNP loci, or less when multi-allelic markers are incorporated into the analysis. Missing genotypes can be handled as well. The program is able to distinguish cases (haplotypes transmitted to the first affected child of a family) from pseudo-controls (non-transmitted haplotypes with respect to the child). We tested the performance of FAMHAP and the accuracy of the obtained haplotype frequencies on a variety of simulated data sets. The implementation proved to work well when many markers were considered and no significant differences between the estimates obtained with the usual EM-algorithm and those obtained in its locus-iterative mode were observed. We conclude from the simulations that the accuracy of haplotype frequency estimation and reconstruction in nuclear families is very reliable in general and robust against missing genotypes.
The Application of Maximum Principle in Supply Chain Cost Optimization
Zhou Ling; Wang Jun
2013-01-01
In this paper, using the maximum principle for analyzing dynamic cost, we propose a new two-stage supply chain model of the manufacturing-assembly mode for high-tech perishable products supply chain...
Maximum Principle for Nonlinear Cooperative Elliptic Systems on IR N
LEADI Liamidi; MARCOS Aboubacar
2011-01-01
We investigate in this work necessary and sufficient conditions for having a Maximum Principle for a cooperative elliptic system on the whole (IR)N.Moreover,we prove the existence of solutions by an approximation method for the considered system.
Maximum Likelihood Factor Structure of the Family Environment Scale.
Fowler, Patrick C.
1981-01-01
Presents the maximum likelihood factor structure of the Family Environment Scale. The first bipolar dimension, "cohesion v conflict," measures relationship-centered concerns, while the second unipolar dimension is an index of "organizational and control" activities. (Author)
Multiresolution maximum intensity volume rendering by morphological adjunction pyramids
Roerdink, Jos B.T.M.
We describe a multiresolution extension to maximum intensity projection (MIP) volume rendering, allowing progressive refinement and perfect reconstruction. The method makes use of morphological adjunction pyramids. The pyramidal analysis and synthesis operators are composed of morphological 3-D
Multiresolution Maximum Intensity Volume Rendering by Morphological Adjunction Pyramids
Roerdink, Jos B.T.M.
2001-01-01
We describe a multiresolution extension to maximum intensity projection (MIP) volume rendering, allowing progressive refinement and perfect reconstruction. The method makes use of morphological adjunction pyramids. The pyramidal analysis and synthesis operators are composed of morphological 3-D
Water Quality Assessment and Total Maximum Daily Loads Information (ATTAINS)
U.S. Environmental Protection Agency — The Water Quality Assessment TMDL Tracking And Implementation System (ATTAINS) stores and tracks state water quality assessment decisions, Total Maximum Daily Loads...
Combining Experiments and Simulations Using the Maximum Entropy Principle
Boomsma, Wouter; Ferkinghoff-Borg, Jesper; Lindorff-Larsen, Kresten
2014-01-01
are not in quantitative agreement with experimental data. The principle of maximum entropy is a general procedure for constructing probability distributions in the light of new data, making it a natural tool in cases when an initial model provides results that are at odds with experiments. The number of maximum entropy...... in the context of a simple example, after which we proceed with a real-world application in the field of molecular simulations, where the maximum entropy procedure has recently provided new insight. Given the limited accuracy of force fields, macromolecular simulations sometimes produce results....... Three very recent papers have explored this problem using the maximum entropy approach, providing both new theoretical and practical insights to the problem. We highlight each of these contributions in turn and conclude with a discussion on remaining challenges....
On the sufficiency of the linear maximum principle
Vidal, Rene Victor Valqui
1987-01-01
Presents a family of linear maximum principles for the discrete-time optimal control problem, derived from the saddle-point theorem of mathematical programming. Some simple examples illustrate the applicability of the main theoretical results...
Maximum Photovoltaic Penetration Levels on Typical Distribution Feeders: Preprint
Hoke, A.; Butler, R.; Hambrick, J.; Kroposki, B.
2012-07-01
This paper presents simulation results for a taxonomy of typical distribution feeders with various levels of photovoltaic (PV) penetration. For each of the 16 feeders simulated, the maximum PV penetration that did not result in steady-state voltage or current violation is presented for several PV location scenarios: clustered near the feeder source, clustered near the midpoint of the feeder, clustered near the end of the feeder, randomly located, and evenly distributed. In addition, the maximum level of PV is presented for single, large PV systems at each location. Maximum PV penetration was determined by requiring that feeder voltages stay within ANSI Range A and that feeder currents stay within the ranges determined by overcurrent protection devices. Simulations were run in GridLAB-D using hourly time steps over a year with randomized load profiles based on utility data and typical meteorological year weather data. For 86% of the cases simulated, maximum PV penetration was at least 30% of peak load.
16 CFR 1505.8 - Maximum acceptable material temperatures.
2010-01-01
... Association, 155 East 44th Street, New York, NY 10017. Material Degrees C. Degrees F. Capacitors (1) (1) Class... capacitor has no marked temperature limit, the maximum acceptable temperature will be assumed to be 65...
Environmental Monitoring, Water Quality - Total Maximum Daily Load (TMDL)
NSGIC GIS Inventory (aka Ramona) — The Clean Water Act Section 303(d) establishes the Total Maximum Daily Load (TMDL) program. The purpose of the TMDL program is to identify sources of pollution and...
PREDICTION OF MAXIMUM DRY DENSITY OF LOCAL GRANULAR ...
methods. A test on a soil of relatively high solid density revealed that the developed relation looses ... where, Pd max is the laboratory maximum dry ... Addis-Jinima Road Rehabilitation. ..... data sets that differ considerably in the magnitude.
Environmental Monitoring, Water Quality - Total Maximum Daily Load (TMDL)
NSGIC Education | GIS Inventory — The Clean Water Act Section 303(d) establishes the Total Maximum Daily Load (TMDL) program. The purpose of the TMDL program is to identify sources of pollution and...
Solar Panel Maximum Power Point Tracker for Power Utilities
Sandeep Banik,
2014-01-01
Full Text Available ―Solar Panel Maximum Power Point Tracker For power utilities‖ As the name implied, it is a photovoltaic system that uses the photovoltaic array as a source of electrical power supply and since every photovoltaic (PV array has an optimum operating point, called the maximum power point, which varies depending on the insolation level and array voltage. A maximum power point tracker (MPPT is needed to operate the PV array at its maximum power point. The objective of this thesis project is to build a photovoltaic (PV array Of 121.6V DC Voltage(6 cell each 20V, 100watt And convert the DC voltage to Single phase 120v,50Hz AC voltage by switch mode power converter‘s and inverter‘s.
A Family of Maximum SNR Filters for Noise Reduction
Huang, Gongping; Benesty, Jacob; Long, Tao;
2014-01-01
This paper is devoted to the study and analysis of the maximum signal-to-noise ratio (SNR) filters for noise reduction both in the time and short-time Fourier transform (STFT) domains with one single microphone and multiple microphones. In the time domain, we show that the maximum SNR filters can...... significantly increase the SNR but at the expense of tremendous speech distortion. As a consequence, the speech quality improvement, measured by the perceptual evaluation of speech quality (PESQ) algorithm, is marginal if any, regardless of the number of microphones used. In the STFT domain, the maximum SNR....... This demonstrates that the maximum SNR filters, particularly the multichannel ones, in the STFT domain may be of great practical value....
Maximum likelihood estimation of finite mixture model for economic data
Phoong, Seuk-Yen; Ismail, Mohd Tahir
2014-06-01
Finite mixture model is a mixture model with finite-dimension. This models are provides a natural representation of heterogeneity in a finite number of latent classes. In addition, finite mixture models also known as latent class models or unsupervised learning models. Recently, maximum likelihood estimation fitted finite mixture models has greatly drawn statistician's attention. The main reason is because maximum likelihood estimation is a powerful statistical method which provides consistent findings as the sample sizes increases to infinity. Thus, the application of maximum likelihood estimation is used to fit finite mixture model in the present paper in order to explore the relationship between nonlinear economic data. In this paper, a two-component normal mixture model is fitted by maximum likelihood estimation in order to investigate the relationship among stock market price and rubber price for sampled countries. Results described that there is a negative effect among rubber price and stock market price for Malaysia, Thailand, Philippines and Indonesia.
On the maximum sufficient range of interstellar vessels
Cartin, Daniel
2011-01-01
This paper considers the likely maximum range of space vessels providing the basis of a mature interstellar transportation network. Using the principle of sufficiency, it is argued that this range will be less than three parsecs for the average interstellar vessel. This maximum range provides access from the Solar System to a large majority of nearby stellar systems, with total travel distances within the network not excessively greater than actual physical distance.
Efficiency at Maximum Power of Interacting Molecular Machines
Golubeva, Natalia; Imparato, Alberto
2012-01-01
We investigate the efficiency of systems of molecular motors operating at maximum power. We consider two models of kinesin motors on a microtubule: for both the simplified and the detailed model, we find that the many-body exclusion effect enhances the efficiency at maximum power of the many- motor...... system, with respect to the single motor case. Remarkably, we find that this effect occurs in a limited region of the system parameters, compatible with the biologically relevant range....
Filtering Additive Measurement Noise with Maximum Entropy in the Mean
Gzyl, Henryk
2007-01-01
The purpose of this note is to show how the method of maximum entropy in the mean (MEM) may be used to improve parametric estimation when the measurements are corrupted by large level of noise. The method is developed in the context on a concrete example: that of estimation of the parameter in an exponential distribution. We compare the performance of our method with the bayesian and maximum likelihood approaches.
The maximum entropy production principle: two basic questions.
Martyushev, Leonid M
2010-05-12
The overwhelming majority of maximum entropy production applications to ecological and environmental systems are based on thermodynamics and statistical physics. Here, we discuss briefly maximum entropy production principle and raises two questions: (i) can this principle be used as the basis for non-equilibrium thermodynamics and statistical mechanics and (ii) is it possible to 'prove' the principle? We adduce one more proof which is most concise today.
On the sufficiency of the linear maximum principle
Vidal, Rene Victor Valqui
1987-01-01
Presents a family of linear maximum principles for the discrete-time optimal control problem, derived from the saddle-point theorem of mathematical programming. Some simple examples illustrate the applicability of the main theoretical results......Presents a family of linear maximum principles for the discrete-time optimal control problem, derived from the saddle-point theorem of mathematical programming. Some simple examples illustrate the applicability of the main theoretical results...
Hybrid TOA/AOA Approximate Maximum Likelihood Mobile Localization
Mohamed Zhaounia; Mohamed Adnan Landolsi; Ridha Bouallegue
2010-01-01
This letter deals with a hybrid time-of-arrival/angle-of-arrival (TOA/AOA) approximate maximum likelihood (AML) wireless location algorithm. Thanks to the use of both TOA/AOA measurements, the proposed technique can rely on two base stations (BS) only and achieves better performance compared to the original approximate maximum likelihood (AML) method. The use of two BSs is an important advantage in wireless cellular communication systems because it avoids hearability problems and reduces netw...
[Study on the maximum entropy principle and population genetic equilibrium].
Zhang, Hong-Li; Zhang, Hong-Yan
2006-03-01
A general mathematic model of population genetic equilibrium about one locus was constructed based on the maximum entropy principle by WANG Xiao-Long et al. They proved that the maximum solve of the model was just the frequency distribution that a population reached Hardy-Weinberg genetic equilibrium. It can suggest that a population reached Hardy-Weinberg genetic equilibrium when the genotype entropy of the population reached the maximal possible value, and that the frequency distribution of the maximum entropy was equivalent to the distribution of Hardy-Weinberg equilibrium law about one locus. They further assumed that the frequency distribution of the maximum entropy was equivalent to all genetic equilibrium distributions. This is incorrect, however. The frequency distribution of the maximum entropy was only equivalent to the distribution of Hardy-Weinberg equilibrium with respect to one locus or several limited loci. The case with regard to limited loci was proved in this paper. Finally we also discussed an example where the maximum entropy principle was not the equivalent of other genetic equilibria.
Fatigue Strength Prediction of Drilling Materials Based on the Maximum Non-metallic Inclusion Size
Zeng, Dezhi; Tian, Gang; Liu, Fei; Shi, Taihe; Zhang, Zhi; Hu, Junying; Liu, Wanying; Ouyang, Zhiying
2015-12-01
In this paper, the statistics of the size distribution of non-metallic inclusions in five drilling materials were performed. Based on the maximum non-metallic inclusion size, the fatigue strength of the drilling material was predicted. The sizes of non-metallic inclusions in drilling materials were observed to follow the inclusion size distribution rule. Then the maximum inclusion size in the fatigue specimens was deduced. According to the prediction equation of the maximum inclusion size and fatigue strength proposed by Murakami, fatigue strength of drilling materials was obtained. Moreover, fatigue strength was also measured through rotating bending tests. The predicted fatigue strength was significantly lower than the measured one. Therefore, according to the comparison results, the coefficients in the prediction equation were revised. The revised equation allowed the satisfactory prediction results of fatigue strength of drilling materials at the fatigue life of 107 rotations and could be used in the fast prediction of fatigue strength of drilling materials.
Maximum Likelihood Inference for the Cox Regression Model with Applications to Missing Covariates.
Chen, Ming-Hui; Ibrahim, Joseph G; Shao, Qi-Man
2009-10-01
In this paper, we carry out an in-depth theoretical investigation for existence of maximum likelihood estimates for the Cox model (Cox, 1972, 1975) both in the full data setting as well as in the presence of missing covariate data. The main motivation for this work arises from missing data problems, where models can easily become difficult to estimate with certain missing data configurations or large missing data fractions. We establish necessary and sufficient conditions for existence of the maximum partial likelihood estimate (MPLE) for completely observed data (i.e., no missing data) settings as well as sufficient conditions for existence of the maximum likelihood estimate (MLE) for survival data with missing covariates via a profile likelihood method. Several theorems are given to establish these conditions. A real dataset from a cancer clinical trial is presented to further illustrate the proposed methodology.
Temple R. Lee
2014-01-01
Full Text Available Downscaling future temperature projections to mountainous regions is vital for many applications, including ecological and water resource management. In this study, we demonstrate a method to downscale maximum temperatures to subkilometer resolutions using the Parameter-elevation Regression on Independent Slopes Model (PRISM. We evaluate the downscaling method with observations from a network of temperature sensors deployed along western and eastern slopes of Virginia’s Shenandoah National Park in the southern Appalachian Mountains. We find that the method overestimates mean July maximum temperatures by about 2°C (4°C along the western (eastern slopes. Based on this knowledge, we introduce corrections to generate maps of current and future maximum temperatures in the Shenandoah National Park.
Estimating Metabolic Fluxes Using a Maximum Network Flexibility Paradigm
Megchelenbrink, Wout; Rossell, Sergio; Huynen, Martijn A.
2015-01-01
Motivation Genome-scale metabolic networks can be modeled in a constraint-based fashion. Reaction stoichiometry combined with flux capacity constraints determine the space of allowable reaction rates. This space is often large and a central challenge in metabolic modeling is finding the biologically most relevant flux distributions. A widely used method is flux balance analysis (FBA), which optimizes a biologically relevant objective such as growth or ATP production. Although FBA has proven to be highly useful for predicting growth and byproduct secretion, it cannot predict the intracellular fluxes under all environmental conditions. Therefore, alternative strategies have been developed to select flux distributions that are in agreement with experimental “omics” data, or by incorporating experimental flux measurements. The latter, unfortunately can only be applied to a limited set of reactions and is currently not feasible at the genome-scale. On the other hand, it has been observed that micro-organisms favor a suboptimal growth rate, possibly in exchange for a more “flexible” metabolic network. Instead of dedicating the internal network state to an optimal growth rate in one condition, a suboptimal growth rate is used, that allows for an easier switch to other nutrient sources. A small decrease in growth rate is exchanged for a relatively large gain in metabolic capability to adapt to changing environmental conditions. Results Here, we propose Maximum Metabolic Flexibility (MMF) a computational method that utilizes this observation to find the most probable intracellular flux distributions. By mapping measured flux data from central metabolism to the genome-scale models of Escherichia coli and Saccharomyces cerevisiae we show that i) indeed, most of the measured fluxes agree with a high adaptability of the network, ii) this result can be used to further reduce the space of feasible solutions iii) this reduced space improves the quantitative predictions
Solar Forcing of Greenland Climate during the Last Glacial Maximum
Adolphi, Florian; Muscheler, Raimund; Svensson, Anders; Aldahan, Ala; Possnert, Göran; Beer, Juerg; Sjolte, Jesper; Björck, Svante
2014-05-01
The role of solar forcing in climate changes is a matter of continuous debate. Challenges arise from the short period of direct observations of total solar irradiance (TSI), which indicate minor TSI variations of approximately 1 ‰ over an 11-year cycle, and the limited understanding of possible feedback mechanisms. Opposed to this, there is evidence from paleoclimate records for a tight coupling of solar activity and regional climate (e.g., Bond et al. 2001, Martin-Puertas et al. 2012). One proposed mechanism to amplify the Sun's influence on climate involves the relatively large modulation of the solar UV output (Haigh et al. 2010). This alters the radiative balance in the stratosphere via ozone feedback processes and eventually propagates downwards causing changes in the tropospheric circulation (Inesson et al. 2011). The regional response to this forcing may, however, also depend on orbital forcing of the mean state of the atmosphere (Dietrich et al. 2012). Prior to direct observations cosmogenic radionuclides such as 10Be and 14C are the most reliable proxies of solar activity. Their atmospheric production rates depend on the flux of galactic cosmic rays into the atmosphere which in turn is modulated by the strength of the Earth's and the solar magnetic fields. However, archives of 10Be and 14C are additionally affected by changes of their respective geochemical environment. Owing to their fundamentally different geochemistry, a combined analysis of 10Be and 14C records can aid to isolate production rate variations more reliably and thus, lead to improved reconstructions of solar variability. Due to the absence of high-quality high-resolution data this approach has so far been limited to the Holocene. We will present the first solar activity reconstruction for the end of the last glacial (22.5 - 10 ka BP) based on the cosmogenic radionuclides 10Be and 14C. We will compare glacial solar activity variations to Holocene features through combined interpretation
Estimating Metabolic Fluxes Using a Maximum Network Flexibility Paradigm.
Wout Megchelenbrink
Full Text Available Genome-scale metabolic networks can be modeled in a constraint-based fashion. Reaction stoichiometry combined with flux capacity constraints determine the space of allowable reaction rates. This space is often large and a central challenge in metabolic modeling is finding the biologically most relevant flux distributions. A widely used method is flux balance analysis (FBA, which optimizes a biologically relevant objective such as growth or ATP production. Although FBA has proven to be highly useful for predicting growth and byproduct secretion, it cannot predict the intracellular fluxes under all environmental conditions. Therefore, alternative strategies have been developed to select flux distributions that are in agreement with experimental "omics" data, or by incorporating experimental flux measurements. The latter, unfortunately can only be applied to a limited set of reactions and is currently not feasible at the genome-scale. On the other hand, it has been observed that micro-organisms favor a suboptimal growth rate, possibly in exchange for a more "flexible" metabolic network. Instead of dedicating the internal network state to an optimal growth rate in one condition, a suboptimal growth rate is used, that allows for an easier switch to other nutrient sources. A small decrease in growth rate is exchanged for a relatively large gain in metabolic capability to adapt to changing environmental conditions.Here, we propose Maximum Metabolic Flexibility (MMF a computational method that utilizes this observation to find the most probable intracellular flux distributions. By mapping measured flux data from central metabolism to the genome-scale models of Escherichia coli and Saccharomyces cerevisiae we show that i indeed, most of the measured fluxes agree with a high adaptability of the network, ii this result can be used to further reduce the space of feasible solutions iii this reduced space improves the quantitative predictions made by FBA and
Nutrient maximums related to low oxygen concentrations in the southern Canada Basin
JIN Ming-ming; SHI Jiuxin; LU Yong; CHEN Jianfang; GAO Guoping; WU Jingfeng; ZHANG Haisheng
2005-01-01
The phenomenon of nutrient maximums at 70～200 m occurred only in the region of the Canada Basin among the world oceans. The prevailing hypothesis was that the direct injection of the low-temperature high-nutrient brines from the Chukchi Sea shelf (＜50 m) in winter provided the nutrient maximums. However, we found that there are five problems in the direct injection process. Formerly Jin et al. considered that the formation of nutrient maximums can be a process of locally long-term regeneration. Here we propose a regeneration-mixture process. Data of temperature, salinity, oxygen and nutrients were collected at three stations in the southern Canada Basin during the summer 1999 cruise. We identified the cores of the surface, near-surface, potential temperature maximum waters and Arctic Bottom Water by the diagrams and vertical profiles of salinity, potential temperature, oxygen and nutrients. The historical 129Ⅰ data indicated that the surface and near-surface waters were Pacific-origin, but the waters below the potential temperature maximum core depth was Atlantic-origin. Along with the correlation of nutrient maximums and very low oxygen contents in the near-surface water, we hypothesize that, the putative organic matter was decomposed to inorganic nutrients; and the Pacific water was mixed with the Atlantic water in the transition zone. The idea of the regeneration-mixture process agrees with the historical observations of no apparent seasonal changes, the smooth nutrient profiles, the lowest saturation of CaCO3 above 400 m, low rate of CFC-11 ventilation and 3H-3He ages of 8～18 a around the nutrient maximum depths.
A Hybrid Maximum Power Point Tracking Method for Automobile Exhaust Thermoelectric Generator
Quan, Rui; Zhou, Wei; Yang, Guangyou; Quan, Shuhai
2016-08-01
To make full use of the maximum output power of automobile exhaust thermoelectric generator (AETEG) based on Bi2Te3 thermoelectric modules (TEMs), taking into account the advantages and disadvantages of existing maximum power point tracking methods, and according to the output characteristics of TEMs, a hybrid maximum power point tracking method combining perturb and observe (P&O) algorithm, quadratic interpolation and constant voltage tracking method was put forward in this paper. Firstly, it searched the maximum power point with P&O algorithms and a quadratic interpolation method, then, it forced the AETEG to work at its maximum power point with constant voltage tracking. A synchronous buck converter and controller were implemented in the electric bus of the AETEG applied in a military sports utility vehicle, and the whole system was modeled and simulated with a MATLAB/Simulink environment. Simulation results demonstrate that the maximum output power of the AETEG based on the proposed hybrid method is increased by about 3.0% and 3.7% compared with that using only the P&O algorithm and the quadratic interpolation method, respectively. The shorter tracking time is only 1.4 s, which is reduced by half compared with that of the P&O algorithm and quadratic interpolation method, respectively. The experimental results demonstrate that the tracked maximum power is approximately equal to the real value using the proposed hybrid method,and it can preferentially deal with the voltage fluctuation of the AETEG with only P&O algorithm, and resolve the issue that its working point can barely be adjusted only with constant voltage tracking when the operation conditions change.
A Hybrid Maximum Power Point Tracking Method for Automobile Exhaust Thermoelectric Generator
Quan, Rui; Zhou, Wei; Yang, Guangyou; Quan, Shuhai
2017-05-01
To make full use of the maximum output power of automobile exhaust thermoelectric generator (AETEG) based on Bi2Te3 thermoelectric modules (TEMs), taking into account the advantages and disadvantages of existing maximum power point tracking methods, and according to the output characteristics of TEMs, a hybrid maximum power point tracking method combining perturb and observe (P&O) algorithm, quadratic interpolation and constant voltage tracking method was put forward in this paper. Firstly, it searched the maximum power point with P&O algorithms and a quadratic interpolation method, then, it forced the AETEG to work at its maximum power point with constant voltage tracking. A synchronous buck converter and controller were implemented in the electric bus of the AETEG applied in a military sports utility vehicle, and the whole system was modeled and simulated with a MATLAB/Simulink environment. Simulation results demonstrate that the maximum output power of the AETEG based on the proposed hybrid method is increased by about 3.0% and 3.7% compared with that using only the P&O algorithm and the quadratic interpolation method, respectively. The shorter tracking time is only 1.4 s, which is reduced by half compared with that of the P&O algorithm and quadratic interpolation method, respectively. The experimental results demonstrate that the tracked maximum power is approximately equal to the real value using the proposed hybrid method,and it can preferentially deal with the voltage fluctuation of the AETEG with only P&O algorithm, and resolve the issue that its working point can barely be adjusted only with constant voltage tracking when the operation conditions change.
An investigation of rugby scrimmaging posture and individual maximum pushing force.
Wu, Wen-Lan; Chang, Jyh-Jong; Wu, Jia-Hroung; Guo, Lan-Yuen
2007-02-01
Although rugby is a popular contact sport and the isokinetic muscle torque assessment has recently found widespread application in the field of sports medicine, little research has examined the factors associated with the performance of game-specific skills directly by using the isokinetic-type rugby scrimmaging machine. This study is designed to (a) measure and observe the differences in the maximum individual pushing forward force produced by scrimmaging in different body postures (3 body heights x 2 foot positions) with a self-developed rugby scrimmaging machine and (b) observe the variations in hip, knee, and ankle angles at different body postures and explore the relationship between these angle values and the individual maximum pushing force. Ten national rugby players were invited to participate in the examination. The experimental equipment included a self-developed rugby scrimmaging machine and a 3-dimensional motion analysis system. Our results showed that the foot positions (parallel and nonparallel foot positions) do not affect the maximum pushing force; however, the maximum pushing force was significantly lower in posture I (36% body height) than in posture II (38%) and posture III (40%). The maximum forward force in posture III (40% body height) was also slightly greater than for the scrum in posture II (38% body height). In addition, it was determined that hip, knee, and ankle angles under parallel feet positioning are factors that are closely negatively related in terms of affecting maximum pushing force in scrimmaging. In cross-feet postures, there was a positive correlation between individual forward force and hip angle of the rear leg. From our results, we can conclude that if the player stands in an appropriate starting position at the early stage of scrimmaging, it will benefit the forward force production.
Variability of maximum and mean average temperature across Libya (1945-2009)
Ageena, I.; Macdonald, N.; Morse, A. P.
2014-08-01
Spatial and temporal variability in daily maximum and mean average daily temperature, monthly maximum and mean average monthly temperature for nine coastal stations during the period 1956-2009 (54 years), and annual maximum and mean average temperature for coastal and inland stations for the period 1945-2009 (65 years) across Libya are analysed. During the period 1945-2009, significant increases in maximum temperature (0.017 °C/year) and mean average temperature (0.021 °C/year) are identified at most stations. Significantly, warming in annual maximum temperature (0.038 °C/year) and mean average annual temperatures (0.049 °C/year) are observed at almost all study stations during the last 32 years (1978-2009). The results show that Libya has witnessed a significant warming since the middle of the twentieth century, which will have a considerable impact on societies and the ecology of the North Africa region, if increases continue at current rates.
Pan, Sudip; Solà, Miquel; Chattaraj, Pratim K
2013-02-28
Hardness and electrophilicity values for several molecules involved in different chemical reactions are calculated at various levels of theory and by using different basis sets. Effects of these aspects as well as different approximations to the calculation of those values vis-à-vis the validity of the maximum hardness and minimum electrophilicity principles are analyzed in the cases of some representative reactions. Among 101 studied exothermic reactions, 61.4% and 69.3% of the reactions are found to obey the maximum hardness and minimum electrophilicity principles, respectively, when hardness of products and reactants is expressed in terms of their geometric means. However, when we use arithmetic mean, the percentage reduces to some extent. When we express the hardness in terms of scaled hardness, the percentage obeying maximum hardness principle improves. We have observed that maximum hardness principle is more likely to fail in the cases of very hard species like F(-), H(2), CH(4), N(2), and OH appearing in the reactant side and in most cases of the association reactions. Most of the association reactions obey the minimum electrophilicity principle nicely. The best results (69.3%) for the maximum hardness and minimum electrophilicity principles reject the 50% null hypothesis at the 2% level of significance.
Individual Module Maximum Power Point Tracking for Thermoelectric Generator Systems
Vadstrup, Casper; Schaltz, Erik; Chen, Min
2013-07-01
In a thermoelectric generator (TEG) system the DC/DC converter is under the control of a maximum power point tracker which ensures that the TEG system outputs the maximum possible power to the load. However, if the conditions, e.g., temperature, health, etc., of the TEG modules are different, each TEG module will not produce its maximum power. If each TEG module is controlled individually, each TEG module can be operated at its maximum power point and the TEG system output power will therefore be higher. In this work a power converter based on noninverting buck-boost converters capable of handling four TEG modules is presented. It is shown that, when each module in the TEG system is operated under individual maximum power point tracking, the system output power for this specific application can be increased by up to 8.4% relative to the situation when the modules are connected in series and 16.7% relative to the situation when the modules are connected in parallel.
Size dependence of efficiency at maximum power of heat engine
Izumida, Y.
2013-10-01
We perform a molecular dynamics computer simulation of a heat engine model to study how the engine size difference affects its performance. Upon tactically increasing the size of the model anisotropically, we determine that there exists an optimum size at which the model attains the maximum power for the shortest working period. This optimum size locates between the ballistic heat transport region and the diffusive heat transport one. We also study the size dependence of the efficiency at the maximum power. Interestingly, we find that the efficiency at the maximum power around the optimum size attains a value that has been proposed as a universal upper bound, and it even begins to exceed the bound as the size further increases. We explain this behavior of the efficiency at maximum power by using a linear response theory for the heat engine operating under a finite working period, which naturally extends the low-dissipation Carnot cycle model [M. Esposito, R. Kawai, K. Lindenberg, C. Van den Broeck, Phys. Rev. Lett. 105, 150603 (2010)]. The theory also shows that the efficiency at the maximum power under an extreme condition may reach the Carnot efficiency in principle.© EDP Sciences Società Italiana di Fisica Springer-Verlag 2013.
How long do centenarians survive? Life expectancy and maximum lifespan.
Modig, K; Andersson, T; Vaupel, J; Rau, R; Ahlbom, A
2017-08-01
The purpose of this study was to explore the pattern of mortality above the age of 100 years. In particular, we aimed to examine whether Scandinavian data support the theory that mortality reaches a plateau at particularly old ages. Whether the maximum length of life increases with time was also investigated. The analyses were based on individual level data on all Swedish and Danish centenarians born from 1870 to 1901; in total 3006 men and 10 963 women were included. Birth cohort-specific probabilities of dying were calculated. Exact ages were used for calculations of maximum length of life. Whether maximum age changed over time was analysed taking into account increases in cohort size. The results confirm that there has not been any improvement in mortality amongst centenarians in the past 30 years and that the current rise in life expectancy is driven by reductions in mortality below the age of 100 years. The death risks seem to reach a plateau of around 50% at the age 103 years for men and 107 years for women. Despite the rising life expectancy, the maximum age does not appear to increase, in particular after accounting for the increasing number of individuals of advanced age. Mortality amongst centenarians is not changing despite improvements at younger ages. An extension of the maximum lifespan and a sizeable extension of life expectancy both require reductions in mortality above the age of 100 years. © 2017 The Association for the Publication of the Journal of Internal Medicine.
Predicting species' maximum dispersal distances from simple plant traits.
Tamme, Riin; Götzenberger, Lars; Zobel, Martin; Bullock, James M; Hooftman, Danny A P; Kaasik, Ants; Pärtel, Meelis
2014-02-01
Many studies have shown plant species' dispersal distances to be strongly related to life-history traits, but how well different traits can predict dispersal distances is not yet known. We used cross-validation techniques and a global data set (576 plant species) to measure the predictive power of simple plant traits to estimate species' maximum dispersal distances. Including dispersal syndrome (wind, animal, ant, ballistic, and no special syndrome), growth form (tree, shrub, herb), seed mass, seed release height, and terminal velocity in different combinations as explanatory variables we constructed models to explain variation in measured maximum dispersal distances and evaluated their power to predict maximum dispersal distances. Predictions are more accurate, but also limited to a particular set of species, if data on more specific traits, such as terminal velocity, are available. The best model (R2 = 0.60) included dispersal syndrome, growth form, and terminal velocity as fixed effects. Reasonable predictions of maximum dispersal distance (R2 = 0.53) are also possible when using only the simplest and most commonly measured traits; dispersal syndrome and growth form together with species taxonomy data. We provide a function (dispeRsal) to be run in the software package R. This enables researchers to estimate maximum dispersal distances with confidence intervals for plant species using measured traits as predictors. Easily obtainable trait data, such as dispersal syndrome (inferred from seed morphology) and growth form, enable predictions to be made for a large number of species.
Prediction of three dimensional maximum isometric neck strength.
Fice, Jason B; Siegmund, Gunter P; Blouin, Jean-Sébastien
2014-09-01
We measured maximum isometric neck strength under combinations of flexion/extension, lateral bending and axial rotation to determine whether neck strength in three dimensions (3D) can be predicted from principal axes strength. This would allow biomechanical modelers to validate their neck models across many directions using only principal axis strength data. Maximum isometric neck moments were measured in 9 male volunteers (29±9 years) for 17 directions. The 3D moments were normalized by the principal axis moments, and compared to unity for all directions tested. Finally, each subject's maximum principal axis moments were used to predict their resultant moment in the off-axis directions. Maximum moments were 30±6 N m in flexion, 32±9 N m in lateral bending, 51±11 N m in extension, and 13±5 N m in axial rotation. The normalized 3D moments were not significantly different from unity (95% confidence interval contained one), except for three directions that combined ipsilateral axial rotation and lateral bending; in these directions the normalized moments exceeded one. Predicted resultant moments compared well to the actual measured values (r2=0.88). Despite exceeding unity, the normalized moments were consistent across subjects to allow prediction of maximum 3D neck strength using principal axes neck strength.
Predicting Maximum Sunspot Number in Solar Cycle 24
Nipa J Bhatt; Rajmal Jain; Malini Aggarwal
2009-03-01
A few prediction methods have been developed based on the precursor technique which is found to be successful for forecasting the solar activity. Considering the geomagnetic activity aa indices during the descending phase of the preceding solar cycle as the precursor, we predict the maximum amplitude of annual mean sunspot number in cycle 24 to be 111 ± 21. This suggests that the maximum amplitude of the upcoming cycle 24 will be less than cycles 21–22. Further, we have estimated the annual mean geomagnetic activity aa index for the solar maximum year in cycle 24 to be 20.6 ± 4.7 and the average of the annual mean sunspot number during the descending phase of cycle 24 is estimated to be 48 ± 16.8.
Construction and enumeration of Boolean functions with maximum algebraic immunity
ZHANG WenYing; WU ChuanKun; LIU XiangZhong
2009-01-01
Algebraic immunity is a new cryptographic criterion proposed against algebraic attacks. In order to resist algebraic attacks, Boolean functions used in many stream ciphers should possess high algebraic immunity. This paper presents two main results to find balanced Boolean functions with maximum algebraic immunity. Through swapping the values of two bits, and then generalizing the result to swap some pairs of bits of the symmetric Boolean function constructed by Dalai, a new class of Boolean functions with maximum algebraic immunity are constructed. Enumeration of such functions is also given. For a given function p(x) with deg(p(x)) < [n/2], we give a method to construct functions in the form p(x)+q(x) which achieve the maximum algebraic immunity, where every term with nonzero coefficient in the ANF of q(x) has degree no less than [n/2].
Propane spectral resolution enhancement by the maximum entropy method
Bonavito, N. L.; Stewart, K. P.; Hurley, E. J.; Yeh, K. C.; Inguva, R.
1990-01-01
The Burg algorithm for maximum entropy power spectral density estimation is applied to a time series of data obtained from a Michelson interferometer and compared with a standard FFT estimate for resolution capability. The propane transmittance spectrum was estimated by use of the FFT with a 2 to the 18th data sample interferogram, giving a maximum unapodized resolution of 0.06/cm. This estimate was then interpolated by zero filling an additional 2 to the 18th points, and the final resolution was taken to be 0.06/cm. Comparison of the maximum entropy method (MEM) estimate with the FFT was made over a 45/cm region of the spectrum for several increasing record lengths of interferogram data beginning at 2 to the 10th. It is found that over this region the MEM estimate with 2 to the 16th data samples is in close agreement with the FFT estimate using 2 to the 18th samples.
The optimal polarizations for achieving maximum contrast in radar images
Swartz, A. A.; Yueh, H. A.; Kong, J. A.; Novak, L. M.; Shin, R. T.
1988-01-01
There is considerable interest in determining the optimal polarizations that maximize contrast between two scattering classes in polarimetric radar images. A systematic approach is presented for obtaining the optimal polarimetric matched filter, i.e., that filter which produces maximum contrast between two scattering classes. The maximization procedure involves solving an eigenvalue problem where the eigenvector corresponding to the maximum contrast ratio is an optimal polarimetric matched filter. To exhibit the physical significance of this filter, it is transformed into its associated transmitting and receiving polarization states, written in terms of horizontal and vertical vector components. For the special case where the transmitting polarization is fixed, the receiving polarization which maximizes the contrast ratio is also obtained. Polarimetric filtering is then applies to synthetic aperture radar images obtained from the Jet Propulsion Laboratory. It is shown, both numerically and through the use of radar imagery, that maximum image contrast can be realized when data is processed with the optimal polarimeter matched filter.
Penalized maximum likelihood estimation and variable selection in geostatistics
Chu, Tingjin; Wang, Haonan; 10.1214/11-AOS919
2012-01-01
We consider the problem of selecting covariates in spatial linear models with Gaussian process errors. Penalized maximum likelihood estimation (PMLE) that enables simultaneous variable selection and parameter estimation is developed and, for ease of computation, PMLE is approximated by one-step sparse estimation (OSE). To further improve computational efficiency, particularly with large sample sizes, we propose penalized maximum covariance-tapered likelihood estimation (PMLE$_{\\mathrm{T}}$) and its one-step sparse estimation (OSE$_{\\mathrm{T}}$). General forms of penalty functions with an emphasis on smoothly clipped absolute deviation are used for penalized maximum likelihood. Theoretical properties of PMLE and OSE, as well as their approximations PMLE$_{\\mathrm{T}}$ and OSE$_{\\mathrm{T}}$ using covariance tapering, are derived, including consistency, sparsity, asymptotic normality and the oracle properties. For covariance tapering, a by-product of our theoretical results is consistency and asymptotic normal...
Influence of maximum decking charge on intensity of blasting vibration
无
2006-01-01
Based on the character of short-time non-stationary random signal, the relationship between the maximum decking charge and energy distribution of blasting vibration signals was investigated by means of the wavelet packet method. Firstly, the characteristics of wavelet transform and wavelet packet analysis were described. Secondly, the blasting vibration signals were analyzed by wavelet packet based on software MATLAB, and the change of energy distribution curve at different frequency bands were obtained. Finally, the law of energy distribution of blasting vibration signals changing with the maximum decking charge was analyzed. The results show that with the increase of decking charge, the ratio of the energy of high frequency to total energy decreases, the dominant frequency bands of blasting vibration signals tend towards low frequency and blasting vibration does not depend on the maximum decking charge.
The subsequence weight distribution of summed maximum length digital sequences
Weathers, G. D.; Graf, E. R.; Wallace, G. R.
1974-01-01
An attempt is made to develop mathematical formulas to provide the basis for the design of pseudorandom signals intended for applications requiring accurate knowledge of the statistics of the signals. The analysis approach involves calculating the first five central moments of the weight distribution of subsequences of hybrid-sum sequences. The hybrid-sum sequence is formed from the modulo-two sum of k maximum length sequences and is an extension of the sum sequences formed from two maximum length sequences that Gilson (1966) evaluated. The weight distribution of the subsequences serves as an approximation to the filtering process. The basic reason for the analysis of hybrid-sum sequences is to establish a large group of sequences with good statistical properties. It is shown that this can be accomplished much more efficiently using the hybrid-sum approach rather than forming the group strictly from maximum length sequences.
Maximum power point tracking for optimizing energy harvesting process
Akbari, S.; Thang, P. C.; Veselov, D. S.
2016-10-01
There has been a growing interest in using energy harvesting techniques for powering wireless sensor networks. The reason for utilizing this technology can be explained by the sensors limited amount of operation time which results from the finite capacity of batteries and the need for having a stable power supply in some applications. Energy can be harvested from the sun, wind, vibration, heat, etc. It is reasonable to develop multisource energy harvesting platforms for increasing the amount of harvesting energy and to mitigate the issue concerning the intermittent nature of ambient sources. In the context of solar energy harvesting, it is possible to develop algorithms for finding the optimal operation point of solar panels at which maximum power is generated. These algorithms are known as maximum power point tracking techniques. In this article, we review the concept of maximum power point tracking and provide an overview of the research conducted in this area for wireless sensor networks applications.
Proscriptive Bayesian Programming and Maximum Entropy: a Preliminary Study
Koike, Carla Cavalcante
2008-11-01
Some problems found in robotics systems, as avoiding obstacles, can be better described using proscriptive commands, where only prohibited actions are indicated in contrast to prescriptive situations, which demands that a specific command be specified. An interesting question arises regarding the possibility to learn automatically if proscriptive commands are suitable and which parametric function could be better applied. Lately, a great variety of problems in robotics domain are object of researches using probabilistic methods, including the use of Maximum Entropy in automatic learning for robot control systems. This works presents a preliminary study on automatic learning of proscriptive robot control using maximum entropy and using Bayesian Programming. It is verified whether Maximum entropy and related methods can favour proscriptive commands in an obstacle avoidance task executed by a mobile robot.
Multitime maximum principle approach of minimal submanifolds and harmonic maps
Udriste, Constantin
2011-01-01
Some optimization problems coming from the Differential Geometry, as for example, the minimal submanifolds problem and the harmonic maps problem are solved here via interior solutions of appropriate multitime optimal control problems. Section 1 underlines some science domains where appear multitime optimal control problems. Section 2 (Section 3) recalls the multitime maximum principle for optimal control problems with multiple (curvilinear) integral cost functionals and $m$-flow type constraint evolution. Section 4 shows that there exists a multitime maximum principle approach of multitime variational calculus. Section 5 (Section 6) proves that the minimal submanifolds (harmonic maps) are optimal solutions of multitime evolution PDEs in an appropriate multitime optimal control problem. Section 7 uses the multitime maximum principle to show that of all solids having a given surface area, the sphere is the one having the greatest volume. Section 8 studies the minimal area of a multitime linear flow as optimal c...
A Maximum Entropy Estimator for the Aggregate Hierarchical Logit Model
Pedro Donoso
2011-08-01
Full Text Available A new approach for estimating the aggregate hierarchical logit model is presented. Though usually derived from random utility theory assuming correlated stochastic errors, the model can also be derived as a solution to a maximum entropy problem. Under the latter approach, the Lagrange multipliers of the optimization problem can be understood as parameter estimators of the model. Based on theoretical analysis and Monte Carlo simulations of a transportation demand model, it is demonstrated that the maximum entropy estimators have statistical properties that are superior to classical maximum likelihood estimators, particularly for small or medium-size samples. The simulations also generated reduced bias in the estimates of the subjective value of time and consumer surplus.
Approximate maximum-entropy moment closures for gas dynamics
McDonald, James G.
2016-11-01
Accurate prediction of flows that exist between the traditional continuum regime and the free-molecular regime have proven difficult to obtain. Current methods are either inaccurate in this regime or prohibitively expensive for practical problems. Moment closures have long held the promise of providing new, affordable, accurate methods in this regime. The maximum-entropy hierarchy of closures seems to offer particularly attractive physical and mathematical properties. Unfortunately, several difficulties render the practical implementation of maximum-entropy closures very difficult. This work examines the use of simple approximations to these maximum-entropy closures and shows that physical accuracy that is vastly improved over continuum methods can be obtained without a significant increase in computational cost. Initially the technique is demonstrated for a simple one-dimensional gas. It is then extended to the full three-dimensional setting. The resulting moment equations are used for the numerical solution of shock-wave profiles with promising results.
Remarks on the strong maximum principle for nonlocal operators
Jerome Coville
2008-05-01
Full Text Available In this note, we study the existence of a strong maximum principle for the nonlocal operator $$ mathcal{M}[u](x :=int_{G}J(gu(x*g^{-1}dmu(g - u(x, $$ where $G$ is a topological group acting continuously on a Hausdorff space $X$ and $u in C(X$. First we investigate the general situation and derive a pre-maximum principle. Then we restrict our analysis to the case of homogeneous spaces (i.e., $ X=G /H$. For such Hausdorff spaces, depending on the topology, we give a condition on $J$ such that a strong maximum principle holds for $mathcal{M}$. We also revisit the classical case of the convolution operator (i.e. $G=(mathbb{R}^n,+, X=mathbb{R}^n, dmu =dy$.
Resource-constrained maximum network throughput on space networks
Yanling Xing; Ning Ge; Youzheng Wang
2015-01-01
This paper investigates the maximum network through-put for resource-constrained space networks based on the delay and disruption-tolerant networking (DTN) architecture. Specifical y, this paper proposes a methodology for calculating the maximum network throughput of multiple transmission tasks under storage and delay constraints over a space network. A mixed-integer linear programming (MILP) is formulated to solve this problem. Simula-tions results show that the proposed methodology can successful y calculate the optimal throughput of a space network under storage and delay constraints, as wel as a clear, monotonic relationship between end-to-end delay and the maximum network throughput under storage constraints. At the same time, the optimization re-sults shine light on the routing and transport protocol design in space communication, which can be used to obtain the optimal network throughput.
Quality, precision and accuracy of the maximum No. 40 anemometer
Obermeir, J. [Otech Engineering, Davis, CA (United States); Blittersdorf, D. [NRG Systems Inc., Hinesburg, VT (United States)
1996-12-31
This paper synthesizes available calibration data for the Maximum No. 40 anemometer. Despite its long history in the wind industry, controversy surrounds the choice of transfer function for this anemometer. Many users are unaware that recent changes in default transfer functions in data loggers are producing output wind speed differences as large as 7.6%. Comparison of two calibration methods used for large samples of Maximum No. 40 anemometers shows a consistent difference of 4.6% in output speeds. This difference is significantly larger than estimated uncertainty levels. Testing, initially performed to investigate related issues, reveals that Gill and Maximum cup anemometers change their calibration transfer functions significantly when calibrated in the open atmosphere compared with calibration in a laminar wind tunnel. This indicates that atmospheric turbulence changes the calibration transfer function of cup anemometers. These results call into question the suitability of standard wind tunnel calibration testing for cup anemometers. 6 refs., 10 figs., 4 tabs.
The evolution of maximum body size of terrestrial mammals.
Smith, Felisa A; Boyer, Alison G; Brown, James H; Costa, Daniel P; Dayan, Tamar; Ernest, S K Morgan; Evans, Alistair R; Fortelius, Mikael; Gittleman, John L; Hamilton, Marcus J; Harding, Larisa E; Lintulaakso, Kari; Lyons, S Kathleen; McCain, Christy; Okie, Jordan G; Saarinen, Juha J; Sibly, Richard M; Stephens, Patrick R; Theodor, Jessica; Uhen, Mark D
2010-11-26
The extinction of dinosaurs at the Cretaceous/Paleogene (K/Pg) boundary was the seminal event that opened the door for the subsequent diversification of terrestrial mammals. Our compilation of maximum body size at the ordinal level by sub-epoch shows a near-exponential increase after the K/Pg. On each continent, the maximum size of mammals leveled off after 40 million years ago and thereafter remained approximately constant. There was remarkable congruence in the rate, trajectory, and upper limit across continents, orders, and trophic guilds, despite differences in geological and climatic history, turnover of lineages, and ecological variation. Our analysis suggests that although the primary driver for the evolution of giant mammals was diversification to fill ecological niches, environmental temperature and land area may have ultimately constrained the maximum size achieved.
The maximum force in a column under constant speed compression
Kuzkin, Vitaly A
2015-01-01
Dynamic buckling of an elastic column under compression at constant speed is investigated assuming the first-mode buckling. Two cases are considered: (i) an imperfect column (Hoff's statement), and (ii) a perfect column having an initial lateral deflection. The range of parameters, where the maximum load supported by a column exceeds Euler static force is determined. In this range, the maximum load is represented as a function of the compression rate, slenderness ratio, and imperfection/initial deflection. Considering the results we answer the following question: "How slowly the column should be compressed in order to measure static load-bearing capacity?" This question is important for the proper setup of laboratory experiments and computer simulations of buckling. Additionally, it is shown that the behavior of a perfect column having an initial deflection differ significantlys form the behavior of an imperfect column. In particular, the dependence of the maximum force on the compression rate is non-monotoni...
Maximum-Entropy Inference with a Programmable Annealer
Chancellor, Nicholas; Vinci, Walter; Aeppli, Gabriel; Warburton, Paul A
2015-01-01
Optimisation problems in science and engineering typically involve finding the ground state (i.e. the minimum energy configuration) of a cost function with respect to many variables. If the variables are corrupted by noise then this approach maximises the likelihood that the solution found is correct. An alternative approach is to make use of prior statistical information about the noise in conjunction with Bayes's theorem. The maximum entropy solution to the problem then takes the form of a Boltzmann distribution over the ground and excited states of the cost function. Here we use a programmable Josephson junction array for the information decoding problem which we simulate as a random Ising model in a field. We show experimentally that maximum entropy decoding at finite temperature can in certain cases give competitive and even slightly better bit-error-rates than the maximum likelihood approach at zero temperature, confirming that useful information can be extracted from the excited states of the annealing...
Estimating the maximum potential revenue for grid connected electricity storage :
Byrne, Raymond Harry; Silva Monroy, Cesar Augusto.
2012-12-01
The valuation of an electricity storage device is based on the expected future cash flow generated by the device. Two potential sources of income for an electricity storage system are energy arbitrage and participation in the frequency regulation market. Energy arbitrage refers to purchasing (stor- ing) energy when electricity prices are low, and selling (discharging) energy when electricity prices are high. Frequency regulation is an ancillary service geared towards maintaining system frequency, and is typically procured by the independent system operator in some type of market. This paper outlines the calculations required to estimate the maximum potential revenue from participating in these two activities. First, a mathematical model is presented for the state of charge as a function of the storage device parameters and the quantities of electricity purchased/sold as well as the quantities o ered into the regulation market. Using this mathematical model, we present a linear programming optimization approach to calculating the maximum potential revenue from an elec- tricity storage device. The calculation of the maximum potential revenue is critical in developing an upper bound on the value of storage, as a benchmark for evaluating potential trading strate- gies, and a tool for capital nance risk assessment. Then, we use historical California Independent System Operator (CAISO) data from 2010-2011 to evaluate the maximum potential revenue from the Tehachapi wind energy storage project, an American Recovery and Reinvestment Act of 2009 (ARRA) energy storage demonstration project. We investigate the maximum potential revenue from two di erent scenarios: arbitrage only and arbitrage combined with the regulation market. Our analysis shows that participation in the regulation market produces four times the revenue compared to arbitrage in the CAISO market using 2010 and 2011 data. Then we evaluate several trading strategies to illustrate how they compare to the
Beat the Deviations in Estimating Maximum Power of Thermoelectric Modules
Gao, Junling; Chen, Min
2013-01-01
Under a certain temperature difference, the maximum power of a thermoelectric module can be estimated by the open-circuit voltage and the short-circuit current. In practical measurement, there exist two switch modes, either from open to short or from short to open, but the two modes can give...... different estimations on the maximum power. Using TEG-127-2.8-3.5-250 and TEG-127-1.4-1.6-250 as two examples, the difference is about 10%, leading to some deviations with the temperature change. This paper analyzes such differences by means of a nonlinear numerical model of thermoelectricity, and finds out...
Microcanonical origin of the maximum entropy principle for open systems.
Lee, Julian; Pressé, Steve
2012-10-01
There are two distinct approaches for deriving the canonical ensemble. The canonical ensemble either follows as a special limit of the microcanonical ensemble or alternatively follows from the maximum entropy principle. We show the equivalence of these two approaches by applying the maximum entropy formulation to a closed universe consisting of an open system plus bath. We show that the target function for deriving the canonical distribution emerges as a natural consequence of partial maximization of the entropy over the bath degrees of freedom alone. By extending this mathematical formalism to dynamical paths rather than equilibrium ensembles, the result provides an alternative justification for the principle of path entropy maximization as well.
Information Entropy Production of Spatio-Temporal Maximum Entropy Distributions
Cofre, Rodrigo
2015-01-01
Spiking activity from populations of neurons display causal interactions and memory effects. Therefore, they are expected to show some degree of irreversibility in time. Motivated by the spike train statistics, in this paper we build a framework to quantify the degree of irreversibility of any maximum entropy distribution. Our approach is based on the transfer matrix technique, which enables us to find an homogeneous irreducible Markov chain that shares the same maximum entropy measure. We provide relevant examples in the context of spike train statistics
Semiparametric maximum likelihood for nonlinear regression with measurement errors.
Suh, Eun-Young; Schafer, Daniel W
2002-06-01
This article demonstrates semiparametric maximum likelihood estimation of a nonlinear growth model for fish lengths using imprecisely measured ages. Data on the species corvina reina, found in the Gulf of Nicoya, Costa Rica, consist of lengths and imprecise ages for 168 fish and precise ages for a subset of 16 fish. The statistical problem may therefore be classified as nonlinear errors-in-variables regression with internal validation data. Inferential techniques are based on ideas extracted from several previous works on semiparametric maximum likelihood for errors-in-variables problems. The illustration of the example clarifies practical aspects of the associated computational, inferential, and data analytic techniques.
Maximum length scale in density based topology optimization
Lazarov, Boyan Stefanov; Wang, Fengwen
2017-01-01
The focus of this work is on two new techniques for imposing maximum length scale in topology optimization. Restrictions on the maximum length scale provide designers with full control over the optimized structure and open possibilities to tailor the optimized design for broader range...... of manufacturing processes by fulfilling the associated technological constraints. One of the proposed methods is based on combination of several filters and builds on top of the classical density filtering which can be viewed as a low pass filter applied to the design parametrization. The main idea...
On the Effect of Mortgages of Maximum Amount
YangZongping
2005-01-01
Since the enactment of the PRC Guarantee Law, mortgages of maximum amount has won wide application in a variety of business occupations and particularly in banking. Compared with the rich content of the 21clause statute on mortgages of maximum amount in Japan's Civil Law, the Chinese law has only four principled clauses. Its lack of operability plus its legislative gaps and defects has a severe impact on the positive effectiveness of the law. The core issue is the question of effectiveness. Because the principles stipulated in the Law run counter to the diversity of its actual practices,
A Maximum Entropy Method for a Robust Portfolio Problem
Yingying Xu
2014-06-01
Full Text Available We propose a continuous maximum entropy method to investigate the robustoptimal portfolio selection problem for the market with transaction costs and dividends.This robust model aims to maximize the worst-case portfolio return in the case that allof asset returns lie within some prescribed intervals. A numerical optimal solution tothe problem is obtained by using a continuous maximum entropy method. Furthermore,some numerical experiments indicate that the robust model in this paper can result in betterportfolio performance than a classical mean-variance model.
On the maximum grain size entrained by photoevaporative winds
Hutchison, Mark A; Maddison, Sarah T
2016-01-01
We model the behaviour of dust grains entrained by photoevaporation-driven winds from protoplanetary discs assuming a non-rotating, plane-parallel disc. We obtain an analytic expression for the maximum entrainable grain size in extreme-UV radiation-driven winds, which we demonstrate to be proportional to the mass loss rate of the disc. When compared with our hydrodynamic simulations, the model reproduces almost all of the wind properties for the gas and dust. In typical turbulent discs, the entrained grain sizes in the wind are smaller than the theoretical maximum everywhere but the inner disc due to dust settling.
Modified maximum likelihood registration based on information fusion
Yongqing Qi; Zhongliang Jing; Shiqiang Hu
2007-01-01
The bias estimation of passive sensors is considered based on information fusion in multi-platform multisensor tracking system. The unobservable problem of bearing-only tracking in blind spot is analyzed. A modified maximum likelihood method, which uses the redundant information of multi-sensor system to calculate the target position, is investigated to estimate the biases. Monte Carlo simulation results show that the modified method eliminates the effect of unobservable problem in the blind spot and can estimate the biases more rapidly and accurately than maximum likelihood method. It is statistically efficient since the standard deviation of bias estimation errors meets the theoretical lower bounds.
Maximum-entropy distributions of correlated variables with prespecified marginals.
Larralde, Hernán
2012-12-01
The problem of determining the joint probability distributions for correlated random variables with prespecified marginals is considered. When the joint distribution satisfying all the required conditions is not unique, the "most unbiased" choice corresponds to the distribution of maximum entropy. The calculation of the maximum-entropy distribution requires the solution of rather complicated nonlinear coupled integral equations, exact solutions to which are obtained for the case of Gaussian marginals; otherwise, the solution can be expressed as a perturbation around the product of the marginals if the marginal moments exist.
A discussion on maximum entropy production and information theory
Bruers, Stijn [Instituut voor Theoretische Fysica, Celestijnenlaan 200D, Katholieke Universiteit Leuven, B-3001 Leuven (Belgium)
2007-07-06
We will discuss the maximum entropy production (MaxEP) principle based on Jaynes' information theoretical arguments, as was done by Dewar (2003 J. Phys. A: Math. Gen. 36 631-41, 2005 J. Phys. A: Math. Gen. 38 371-81). With the help of a simple mathematical model of a non-equilibrium system, we will show how to derive minimum and maximum entropy production. Furthermore, the model will help us to clarify some confusing points and to see differences between some MaxEP studies in the literature.
Parameter estimation in X-ray astronomy using maximum likelihood
Wachter, K.; Leach, R.; Kellogg, E.
1979-01-01
Methods of estimation of parameter values and confidence regions by maximum likelihood and Fisher efficient scores starting from Poisson probabilities are developed for the nonlinear spectral functions commonly encountered in X-ray astronomy. It is argued that these methods offer significant advantages over the commonly used alternatives called minimum chi-squared because they rely on less pervasive statistical approximations and so may be expected to remain valid for data of poorer quality. Extensive numerical simulations of the maximum likelihood method are reported which verify that the best-fit parameter value and confidence region calculations are correct over a wide range of input spectra.
Efficiency of autonomous soft nanomachines at maximum power.
Seifert, Udo
2011-01-14
We consider nanosized artificial or biological machines working in steady state enforced by imposing nonequilibrium concentrations of solutes or by applying external forces, torques, or electric fields. For unicyclic and strongly coupled multicyclic machines, efficiency at maximum power is not bounded by the linear response value 1/2. For strong driving, it can even approach the thermodynamic limit 1. Quite generally, such machines fall into three different classes characterized, respectively, as "strong and efficient," "strong and inefficient," and "balanced." For weakly coupled multicyclic machines, efficiency at maximum power has lost any universality even in the linear response regime.
Robust Controller to Extract the Maximum Power of a Photovoltaic System
OULD CHERCHALI Noureddine
2014-05-01
Full Text Available This paper proposes a technique of intelligent control to track the maximum power point (MPPT of a photovoltaic system . The PV system is non-linear and it is exposed to external perturbations like temperature and solar irradiation. Fuzzy logic control is known for its stability and robustness. FLC is adopted in this work for the improvement and optimization of control performance of a photovoltaic system. Another technique called perturb and observe (P & O is studied and compared with the FLC technique. The PV system is constituted of a photovoltaic panel (PV, a DC-DC converter (Boost and a battery like a load. The simulation results are developed in MATLAB / Simulink software. The results show that the controller based on fuzzy logic is better and faster than the conventional controller perturb and observe (P & O and gives a good maximum power of a photovoltaic generator under different changes of weather conditions.
Giovana Mara Rodrigues Borges
2016-11-01
Full Text Available Knowledge of the probabilistic behavior of rainfall is extremely important to the design of drainage systems, dam spillways, and other hydraulic projects. This study therefore examined statistical models to predict annual daily maximum rainfall as well as models of heavy rain for the city of Formiga - MG. To do this, annual maximum daily rainfall data were ranked in decreasing order that best describes the statistical distribution by exceedance probability. Daily rainfall disaggregation methodology was used for the intense rain model studies and adjusted with Intensity-Duration-Frequency (IDF and Exponential models. The study found that the Gumbel model better adhered to the data regarding observed frequency as indicated by the Chi-squared test, and that the exponential model best conforms to the observed data to predict intense rains.
Maximum Power Point Tracking Using Adaptive Fuzzy Logic control for Photovoltaic System
Anass Ait Laachir
2015-01-01
Full Text Available This work presents an intelligent approach to the improvement and optimization of control performance of a photovoltaic system with maximum power point tracking based on fuzzy logic control. This control was compared with the conventional control based on Perturb &Observe algorithm. The results obtained in Matlab/Simulink under different conditions show a marked improvement in the performance of fuzzy control MPPT of the PV system.
Test the Principle of Maximum Entropy in Constant Sum 2x2 Game:Evidence in Experimental Economics
Xu, Bin; Wang, Zhijian; Zhang, Jianbo
2011-01-01
Entropy serves as a central observable which indicates uncertainty in many chemical, thermodynamical, biological and ecological systems, and the principle of the maximum entropy (MaxEnt) is widely supported in natural science. Recently, entropy is employed to describe the social system in which human subjects are interacted with each other, but the principle of the maximum entropy has never been reported from this field empirically. By using laboratory experimental data, we test the uncertainty of strategy type in various competing environments with two person constant sum $2 \\times 2$ game. Empirical evidence shows that, in this competing game environment, the outcome of human's decision-making obeys the principle of maximum entropy.
A Brooks type theorem for the maximum local edge connectivity
Stiebitz, Michael; Toft, Bjarne
2017-01-01
For a graph $G$, let $\\cn(G)$ and $\\la(G)$ denote the chromatic number of $G$ and the maximum local edge connectivity of $G$, respectively. A result of Dirac \\cite{Dirac53} implies that every graph $G$ satisfies $\\cn(G)\\leq \\la(G)+1$. In this paper we characterize the graphs $G$ for which $\\cn(G)...
Prediction of Maximum Oxygen Consumption from Walking, Jogging, or Running.
Larsen, Gary E.; George, James D.; Alexander, Jeffrey L.; Fellingham, Gilbert W.; Aldana, Steve G.; Parcell, Allen C.
2002-01-01
Developed a cardiorespiratory endurance test that retained the inherent advantages of submaximal testing while eliminating reliance on heart rate measurement in predicting maximum oxygen uptake (VO2max). College students completed three exercise tests. The 1.5-mile endurance test predicted VO2max from submaximal exercise without requiring heart…
On the maximum backscattering cross section of passive linear arrays
Solymar, L.; Appel-Hansen, Jørgen
1974-01-01
The maximum backscattering cross section of an equispaced linear array connected to a reactive network and consisting of isotropic radiators is calculated forn = 2, 3, and 4 elements as a function of the incident angle and of the distance between the elements. On the basis of the results obtained...