Curiale, Ariel H; Vegas-Sánchez-Ferrero, Gonzalo; Bosch, Johan G; Aja-Fernández, Santiago
2015-08-01
The strain and strain-rate measures are commonly used for the analysis and assessment of regional myocardial function. In echocardiography (EC), the strain analysis became possible using Tissue Doppler Imaging (TDI). Unfortunately, this modality shows an important limitation: the angle between the myocardial movement and the ultrasound beam should be small to provide reliable measures. This constraint makes it difficult to provide strain measures of the entire myocardium. Alternative non-Doppler techniques such as Speckle Tracking (ST) can provide strain measures without angle constraints. However, the spatial resolution and the noisy appearance of speckle still make the strain estimation a challenging task in EC. Several maximum likelihood approaches have been proposed to statistically characterize the behavior of speckle, which results in a better performance of speckle tracking. However, those models do not consider common transformations to achieve the final B-mode image (e.g. interpolation). This paper proposes a new maximum likelihood approach for speckle tracking which effectively characterizes speckle of the final B-mode image. Its formulation provides a diffeomorphic scheme than can be efficiently optimized with a second-order method. The novelty of the method is threefold: First, the statistical characterization of speckle generalizes conventional speckle models (Rayleigh, Nakagami and Gamma) to a more versatile model for real data. Second, the formulation includes local correlation to increase the efficiency of frame-to-frame speckle tracking. Third, a probabilistic myocardial tissue characterization is used to automatically identify more reliable myocardial motions. The accuracy and agreement assessment was evaluated on a set of 16 synthetic image sequences for three different scenarios: normal, acute ischemia and acute dyssynchrony. The proposed method was compared to six speckle tracking methods. Results revealed that the proposed method is the most
Hodder, Joanne N; Keir, Peter J
2013-10-01
Muscle specific maximal voluntary isometric contractions (MVIC) are commonly used to elicit reference amplitudes to normalize electromyographic signals (EMG). It has been questioned whether this is appropriate for normalizing EMG from dynamic contractions. This study compares EMG amplitude when shoulder muscle activity from dynamic contractions is normalized to isometric and isokinetic maximal excitation as well as a hybrid approach currently used in our laboratory. Anterior, middle and posterior deltoid, upper and lower trapezius, pectoralis major, latissimus dorsi and infraspinatus were monitored during (1) manually resisted MVICs, and (2) maximum voluntary dynamic concentric contractions (MVDC) on an isokinetic dynamometer. Dynamic contractions were performed (a) at 30°/s about the longitudinal, frontal and sagittal axes of the shoulder, and (b) during manual bi-rotation of a tilted wheel at 120°/s. EMG from the wheel task was normalized to the maximum excitation from (i) the muscle specific MVIC, (ii) from any MVIC (MVICALL), (iii) for any MVDC, (iv) from any exertion (maximum experimental excitation, MEE). Mean EMG from the wheel task was up to 45% greater when normalized to muscle specific isometric contractions (method i) than when normalized to MEE (method iv). Seventy-five percent of MEE's occurred during MVDCs. This study presents an 20 useful and effective process for obtaining the greatest excitation from the shoulder muscles when normalizing dynamic efforts.
Regional tidal lung strain in mechanically ventilated normal lungs.
Paula, Luis Felipe; Wellman, Tyler J; Winkler, Tilo; Spieth, Peter M; Güldner, Andreas; Venegas, Jose G; Gama de Abreu, Marcelo; Carvalho, Alysson R; Vidal Melo, Marcos F
2016-12-01
Parenchymal strain is a key determinant of lung injury produced by mechanical ventilation. However, imaging estimates of volumetric tidal strain (ε = regional tidal volume/reference volume) present substantial conceptual differences in reference volume computation and consideration of tidally recruited lung. We compared current and new methods to estimate tidal volumetric strains with computed tomography, and quantified the effect of tidal volume (VT) and positive end-expiratory pressure (PEEP) on strain estimates. Eight supine pigs were ventilated with VT = 6 and 12 ml/kg and PEEP = 0, 6, and 12 cmH2O. End-expiratory and end-inspiratory scans were analyzed in eight regions of interest along the ventral-dorsal axis. Regional reference volumes were computed at end-expiration (with/without correction of regional VT for intratidal recruitment) and at resting lung volume (PEEP = 0) corrected for intratidal and PEEP-derived recruitment. All strain estimates demonstrated vertical heterogeneity with the largest tidal strains in middependent regions (P < 0.01). Maximal strains for distinct estimates occurred at different lung regions and were differently affected by VT-PEEP conditions. Values consistent with lung injury and inflammation were reached regionally, even when global measurements were below critical levels. Strains increased with VT and were larger in middependent than in nondependent lung regions. PEEP reduced tidal-strain estimates referenced to end-expiratory lung volumes, although it did not affect strains referenced to resting lung volume. These estimates of tidal strains in normal lungs point to middependent lung regions as those at risk for ventilator-induced lung injury. The different conditions and topography at which maximal strain estimates occur allow for testing the importance of each estimate for lung injury.
Opening angles and residual strains in normal rat trachea
柳兆荣; 王忆勤; 滕忠照; 徐刚; 汤伟昌
2002-01-01
The no-load state and zero-stress state of the normal rat trachea were analyzed. It was found that there exist compressive residual strains in the inner wall region of the rat trachea and tensile residual strains in the outer wall region. The fact that the opening angle of the rat trachea cut at the cartilaginous region is significantly larger than that cut at the muscular portion shows that residual strains exist mainly in the muscular region in the rat trachea. It was also indicated that the opening angles and residual strains expressed by cutting at the muscular portion are basically identical along longitudinal location and those expressed by cutting in the cartilaginous region tend to increase in the longitudinal direction in the normal rat, and that there exists quantitatively positive correlation between the opening angles and residual strains in rat trachea. The results will help to further understand the opening angles and residual strains in the trachea and study tracheal remodeling in response to mechanical environment.
Computer modelling of bone's adaptation: the role of normal strain, shear strain and fluid flow.
Tiwari, Abhishek Kumar; Prasad, Jitendra
2017-04-01
Bone loss is a serious health problem. In vivo studies have found that mechanical stimulation may inhibit bone loss as elevated strain in bone induces osteogenesis, i.e. new bone formation. However, the exact relationship between mechanical environment and osteogenesis is less clear. Normal strain is considered as a prime stimulus of osteogenic activity; however, there are some instances in the literature where osteogenesis is observed in the vicinity of minimal normal strain, specifically near the neutral axis of bending in long bones. It suggests that osteogenesis may also be induced by other or secondary components of mechanical environment such as shear strain or canalicular fluid flow. As it is evident from the literature, shear strain and fluid flow can be potent stimuli of osteogenesis. This study presents a computational model to investigate the roles of these stimuli in bone adaptation. The model assumes that bone formation rate is roughly proportional to the normal, shear and fluid shear strain energy density above their osteogenic thresholds. In vivo osteogenesis due to cyclic cantilever bending of a murine tibia has been simulated. The model predicts results close to experimental findings when normal strain, and shear strain or fluid shear were combined. This study also gives a new perspective on the relation between osteogenic potential of micro-level fluid shear and that of macro-level bending shear. Attempts to establish such relations among the components of mechanical environment and corresponding osteogenesis may ultimately aid in the development of effective approaches to mitigating bone loss.
Design of reinforced concrete walls casted in place for the maximum normal stress of compression
T. C. Braguim
Full Text Available It is important to evaluate which designing models are safe and appropriate to structural analysis of buildings constructed in Concrete Wall system. In this work it is evaluated, through comparison of maximum normal stress of compression, a simple numerical model, which represents the walls with frame elements, with another much more robust and refined, which represents the walls with shells elements. The designing of the normal stress of compression it is done for both cases, based on NBR 16055, to conclude if the wall thickness initially adopted, it is enough or not.
YIN; Changming; ZHAO; Lincheng; WEI; Chengdong
2006-01-01
In a generalized linear model with q × 1 responses, the bounded and fixed (or adaptive) p × q regressors Zi and the general link function, under the most general assumption on the minimum eigenvalue of ∑ni=1 ZiZ'i, the moment condition on responses as weak as possible and the other mild regular conditions, we prove that the maximum quasi-likelihood estimates for the regression parameter vector are asymptotically normal and strongly consistent.
ASYMPTOTIC NORMALITY OF QUASI MAXIMUM LIKELIHOOD ESTIMATE IN GENERALIZED LINEAR MODELS
YUE LI; CHEN XIRU
2005-01-01
For the Generalized Linear Model (GLM), under some conditions including that the specification of the expectation is correct, it is shown that the Quasi Maximum Likelihood Estimate (QMLE) of the parameter-vector is asymptotic normal. It is also shown that the asymptotic covariance matrix of the QMLE reaches its minimum (in the positive-definte sense) in case that the specification of the covariance matrix is correct.
Philipsen, Kirsten Riber; Christiansen, Lasse Engbo; Mandsberg, Lotte Frigaard
2008-01-01
that best describes data is a model taking into account the full covariance structure. An inference study is made in order to determine whether the growth rate of the five bacteria strains is the same. After applying a likelihood-ratio test to models with a full covariance structure, it is concluded...... that the specific growth rate is the same for all bacteria strains. This study highlights the importance of carrying out an explorative examination of residuals in order to make a correct parametrization of a model including the covariance structure. The ML method is shown to be a strong tool as it enables......The specific growth rate for P. aeruginosa and four mutator strains mutT, mutY, mutM and mutY–mutM is estimated by a suggested Maximum Likelihood, ML, method which takes the autocorrelation of the observation into account. For each bacteria strain, six wells of optical density, OD, measurements...
Yingsong Li
2017-01-01
Full Text Available A soft parameter function penalized normalized maximum correntropy criterion (SPF-NMCC algorithm is proposed for sparse system identification. The proposed SPF-NMCC algorithm is derived on the basis of the normalized adaptive filter theory, the maximum correntropy criterion (MCC algorithm and zero-attracting techniques. A soft parameter function is incorporated into the cost function of the traditional normalized MCC (NMCC algorithm to exploit the sparsity properties of the sparse signals. The proposed SPF-NMCC algorithm is mathematically derived in detail. As a result, the proposed SPF-NMCC algorithm can provide an efficient zero attractor term to effectively attract the zero taps and near-zero coefficients to zero, and, hence, it can speed up the convergence. Furthermore, the estimation behaviors are obtained by estimating a sparse system and a sparse acoustic echo channel. Computer simulation results indicate that the proposed SPF-NMCC algorithm can achieve a better performance in comparison with the MCC, NMCC, LMS (least mean square algorithms and their zero attraction forms in terms of both convergence speed and steady-state performance.
Tanabe, Yuki; Kido, Teruhito; Kurata, Akira; Sawada, Shun; Suekuni, Hiroshi; Kido, Tomoyuki; Yokoi, Takahiro; Miyagawa, Masao; Mochizuki, Teruhito [Ehime University Graduate School of Medicine, Department of Radiology, Toon City, Ehime (Japan); Uetani, Teruyoshi; Inoue, Katsuji [Ehime University Graduate School of Medicine, Department of Cardiology, Pulmonology, Hypertension and Nephrology, Toon City, Ehime (Japan)
2017-04-15
To evaluate the feasibility of three-dimensional (3D) maximum principal strain (MP-strain) derived from cardiac computed tomography (CT) for detecting myocardial infarction (MI). Forty-three patients who underwent cardiac CT and magnetic resonance imaging (MRI) were retrospectively selected. Using the voxel tracking of motion coherence algorithm, the peak CT MP-strain was measured using the 16-segment model. With the trans-mural extent of late gadolinium enhancement (LGE) and the distance from MI, all segments were classified into four groups (infarcted, border, adjacent, and remote segments); infarcted and border segments were defined as MI with LGE positive. Diagnostic performance of MP-strain for detecting MI was compared with per cent systolic wall thickening (%SWT) assessed by MRI using receiver-operating characteristic curve analysis at a segment level. Of 672 segments excluding16 segments influenced by artefacts, 193 were diagnosed as MI. Sensitivity and specificity of peak MP-strain to identify MI were 81 % [95 % confidence interval (95 % CI): 74-88 %] and 86 % (81-92 %) compared with %SWT: 76 % (60-95 %) and 68 % (48-84 %), respectively. The area under the curve of peak MP-strain was superior to %SWT [0.90 (0.87-0.93) vs. 0.80 (0.76-0.83), p < 0.05]. CT MP-strain has a potential to provide incremental value to coronary CT angiography for detecting MI. (orig.)
Qibing GAO; Yaohua WU; Chunhua ZHU; Zhanfeng WANG
2008-01-01
In generalized linear models with fixed design, under the assumption ~ →∞ and otherregularity conditions, the asymptotic normality of maximum quasi-likelihood estimator (β)n, which is the root of the quasi-likelihood equation with natural link function ∑n/i=1Xi(yi-μ(X1/iβ))=0, is obtained,where λ/-n denotes the minimum eigenvalue of ∑n/i=1XiX/1/i, Xi are bounded p x q regressors, and yi are q × 1 responses.
Ertas, Gokhan; Gulcur, H Ozcan; Tunaci, Mehtap
2008-05-01
Effectiveness of morphological descriptors based on normalized maximum intensity-time ratio (nMITR) maps generated using a 3 x 3 pixel moving mask on dynamic contrast-enhanced magnetoresistance (MR) mammograms are studied for assessment of malignancy. After a rough indication of volume of interest on the nMITR maps, lesions are automatically segmented. Two-dimensional (2D) convexity, normalized complexity, extent, and eccentricity as well as three-dimensional (3D) versions of these descriptors and contact surface area ratio are computed. On a data set consisting of dynamic contrast-enhanced MR DCE-MR mammograms from 51 women that contain 26 benign and 32 malignant lesions, 3D convexity, complexity, and extent are found to reflect aggressiveness of malignancy better than 2D descriptors. Contact surface area ratio which is easily adaptable to different imaging resolutions is found to be the most significant and accurate descriptor (75% sensitivity, 88% specificity, 89% positive predictive values, and 74% negative predictive values).
Peters, B. C., Jr.; Walker, H. F.
1975-01-01
New results and insights concerning a previously published iterative procedure for obtaining maximum-likelihood estimates of the parameters for a mixture of normal distributions were discussed. It was shown that the procedure converges locally to the consistent maximum likelihood estimate as long as a specified parameter is bounded between two limits. Bound values were given to yield optimal local convergence.
Im, Jooeun; Kim, Mihyun; Choi, Ki-Sun; Hwang, Tae-Kyung; Kwon, Il-Bum
2014-06-10
In this paper, new fiber Bragg grating (FBG) sensor probes are designed to intermittently detect the maximum tensile strain of composite materials, so as to evaluate the structural health status. This probe is fabricated by two thin Al films bonded to an FBG optical fiber and two supporting brackets, which are fixed on the surface of composite materials. The residual strain of the Al packaged FBG sensor probe is induced by the strain of composite materials. This residual strain can indicate the maximum strain of composite materials. Two types of sensor probes are prepared-one is an FBG with 18 μm thick Al films, and the other is an FBG with 36 μm thick Al films-to compare the thickness effect on the detection sensitivity. These sensor probes are bonded on the surfaces of carbon fiber reinforced plastics composite specimens. In order to determine the strain sensitivity between the residual strain of the FBG sensor probe and the maximum strain of the composite specimen, tensile tests are performed by universal testing machine, under the loading-unloading test condition. The strain sensitivities of the probes, which have the Al thicknesses of 18 and 36 μm, are determined as 0.13 and 0.23, respectively.
Lee, Sang-Yeol; Jo, Marg-Eun
2016-01-01
[Purpose] Maximum voluntary isometric contraction can increase the reliability of electromyography data by controlling respiration; however, many studies that use normalization of electromyography data fail to account for this. This study aims to check changes in maximum voluntary isometric contraction based on changes in posture and respiration conditions. [Subjects and Methods] Twenty-two healthy volunteers were included in this study. Using 22 healthy subjects, MVIC of the biceps brachii m...
Changes in Fetal Left and Right Ventricular Strain Mechanics during Normal Pregnancy.
Kapusta, L.; Mainzer, G.; Weiner, Z.; Deutsch, L.; Khoury, A.; Haddad, S.; Lorber, A.
2013-01-01
BACKGROUND: The aim of this study was to detect normal changes in fetal two-dimensional speckle-tracking echocardiography-derived values for global and regional longitudinal left and right ventricular strain, strain rate, and time to peak (T2P) global strain during pregnancy. METHODS: Forty-four hea
Sung Woo Park
2015-03-01
Full Text Available The safety of a multi-span waler beam subjected simultaneously to a distributed load and deflections at its supports can be secured by limiting the maximum stress of the beam to a specific value to prevent the beam from reaching a limit state for failure or collapse. Despite the fact that the vast majority of accidents on construction sites occur at waler beams in retaining wall systems, no safety monitoring model that can consider deflections at the supports of the beam is available. In this paper, a maximum stress estimation model for a waler beam based on average strains measured from vibrating wire strain gauges (VWSGs, the most frequently used sensors in construction field, is presented. The model is derived by defining the relationship between the maximum stress and the average strains measured from VWSGs. In addition to the maximum stress, support reactions, deflections at supports, and the magnitudes of distributed loads for the beam structure can be identified by the estimation model using the average strains. Using simulation tests on two multi-span beams, the performance of the model is evaluated by estimating maximum stress, deflections at supports, support reactions, and the magnitudes of distributed loads.
Silver, Jeremy D; Ritchie, Matthew E; Smyth, Gordon K
2009-01-01
is developed for exact maximum likelihood estimation (MLE) using high-quality optimization software and using the saddle-point estimates as starting values. "MLE" is shown to outperform heuristic estimators proposed by other authors, both in terms of estimation accuracy and in terms of performance on real data....... The saddle-point approximation is an adequate replacement in most practical situations. The performance of normexp for assessing differential expression is improved by adding a small offset to the corrected intensities....
A.H. Curiale (Ariel H.); G. Vegas-Sanchez-Ferrero (Gonzalo); J.G. Bosch (Hans); S. Aja-Fernández (Santiago)
2015-01-01
textabstractThe strain and strain-rate measures are commonly used for the analysis and assessment of regional myocardial function. In echocardiography (EC), the strain analysis became possible using Tissue Doppler Imaging (TDI). Unfortunately, this modality shows an important limitation: the angle
A.H. Curiale (Ariel H.); G. Vegas-Sanchez-Ferrero (Gonzalo); J.G. Bosch (Johan); S. Aja-Fernández (Santiago)
2015-01-01
textabstractThe strain and strain-rate measures are commonly used for the analysis and assessment of regional myocardial function. In echocardiography (EC), the strain analysis became possible using Tissue Doppler Imaging (TDI). Unfortunately, this modality shows an important limitation: the angle b
Isotope effect maximum for proton transfer between normal acids and bases
Bergman, N.A. (Univ. of Goeteborg); Chiang, Y.; Kresge, A.J.
1978-08-30
Kinetic isotope effects were determined for the reaction between p-methylbenzaldehyde and methoxylamine in the presence of thirteen carboxylic acid catalysts and ammonium ions using deuterium oxide as the solvent for k/sub D/ measurements. The ratio of k/sub H//k/sub D/ = 1 for the relatively strong acids, CNCH/sub 2/CO/sub 2/H and HCO/sub 2/H, rise to a maximum approaching 3 for CNCH/sub 2/CH/sub 2/NH/sub 3//sup +/, O(CH/sub 2/CH/sub 2/)/sub 2/NH/sub 2//sup +/, and C/sub 6/H/sub 5/CH/sub 2/NH/sub 3//sup +/, and decrease to less than 2 for CH/sub 3/OCH/sub 2/CH/sub 2/CH/sub 2/NH/sub 3//sup +/, and CH/sub 3/CH/sub 2/CH/sub 2/NH/sub 3//sup +/. The authors state that the maximum observed can not be the result of solvent and secondary isotope effects, but must be caused by a rate determining step involving the proton transfer from the catalyst to the alkoxide oxygen of the first-formed zwitterion intermediate. From a discussion of the pKa's of the proton donor and the protonated proton acceptor (for these systems, pKa = 0), the authors conclude that the experimental data are consistent with a model in which encounter, proton transfer, and separation occur at approximately equal rates.
Wu, Victor Chien-Chia; Otsuji, Yutaka; Takeuchi, Masaaki
2017-01-01
Background Newer 2D strain software has a potential to assess layer-specific strain. However, normal reference values for layer-specific strain have not been established. We aimed to establish the normal ranges of layer-specific longitudinal and circumferential strain (endocardial global longitudinal strain (GLS), transmural GLS, epicardial GLS, endocardial global circumferential strain (GCS), transmural GCS, and epicardial GCS). Methods and results We retrospectively analyzed longitudinal and circumferential strain parameters in 235 healthy subjects, with use of layer-specific 2D speckle tracking software (GE). The endocardial strain/epicardial strain (Endo/Epi) ratio was also measured to assess the strain gradient across the myocardium. The endocardial, transmural, and epicardial GLS values and the Endo/Epi ratio in the normal subjects were -23.1±2.3, -20.0±2.0, -17.6±1.9, and 1.31±0.07, respectively. The corresponding values of GCS were -28.5±3.0, -20.8±2.3, -15.3±2.0, and 1.88±0.17, respectively. The layer-specific global strain parameters exhibited no age dependency but did exhibit gender dependency except for endocardial GCS. A subgroup analysis revealed that basal and middle levels of endocardial LS was decreased in the middle and elderly aged group. However, apical endocardial LS was preserved even in the elderly subjects. Conclusions We proposed normal reference values for layer-specific strain based on both age and gender. This detailed strain analysis provides layer-oriented information with the potential to characterize abnormal findings in various cardiovascular diseases. PMID:28662186
Peters, B. C., Jr.; Walker, H. F.
1976-01-01
The problem of obtaining numerically maximum likelihood estimates of the parameters for a mixture of normal distributions is addressed. In recent literature, a certain successive approximations procedure, based on the likelihood equations, is shown empirically to be effective in numerically approximating such maximum-likelihood estimates; however, the reliability of this procedure was not established theoretically. Here, a general iterative procedure is introduced, of the generalized steepest-ascent (deflected-gradient) type, which is just the procedure known in the literature when the step-size is taken to be 1. With probability 1 as the sample size grows large, it is shown that this procedure converges locally to the strongly consistent maximum-likelihood estimate whenever the step-size lies between 0 and 2. The step-size which yields optimal local convergence rates for large samples is determined in a sense by the separation of the component normal densities and is bounded below by a number between 1 and 2.
Peters, B. C., Jr.; Walker, H. F.
1978-01-01
This paper addresses the problem of obtaining numerically maximum-likelihood estimates of the parameters for a mixture of normal distributions. In recent literature, a certain successive-approximations procedure, based on the likelihood equations, was shown empirically to be effective in numerically approximating such maximum-likelihood estimates; however, the reliability of this procedure was not established theoretically. Here, we introduce a general iterative procedure, of the generalized steepest-ascent (deflected-gradient) type, which is just the procedure known in the literature when the step-size is taken to be 1. We show that, with probability 1 as the sample size grows large, this procedure converges locally to the strongly consistent maximum-likelihood estimate whenever the step-size lies between 0 and 2. We also show that the step-size which yields optimal local convergence rates for large samples is determined in a sense by the 'separation' of the component normal densities and is bounded below by a number between 1 and 2.
Measurement of SUVs-Maximum for Normal Region Using VOI in PET/MRI and PET/CT
Jeong Kyu Park
2014-01-01
Full Text Available The purpose of this research is to establish an overall data set associated with the VOI (Volume of Interest, which is available for simultaneous assessment of PET/MRI and PET/CT regardless of the use of contrast media. The participants as objects of this investigation are 26 healthy examinees in Korea, SUV (standardized-uptake-values-maximum evaluation for whole-body F-18 FDG (fluorodeoxyglucose PET/MRI image using VOI of normal region has exhibited very significant difference to that for whole-body F-18 FDG PET/CT image (significant probability value (P0.8. It is shown that one needs to decide SUVs-maximum for PET/MRI with the reduction of 25.0~26.4% from their evaluated value and needs to decide with the reduction of 28.8~29.4% in the same situation but with the use of contrast media. The use of SUVLBM-maximum (SUVLean Body Mass-maximum is very advantageous in reading overall image of PET/CT and PET/MRI to medical doctors and researchers, if we consider its convenience and efficiency. We expect that this research enhances the level of the early stage accurate diagnosis with whole-body images of PET/MRI and PET/CT.
Small breast lesion classification performance using the normalized axial-shear strain area feature.
Thittai, Arun K; Yamal, Jose-Miguel; Ophir, Jonathan
2013-03-01
Breast cancers that are found and confirmed because they are causing symptoms tend to be larger and are more likely to have already spread to the lymph nodes and beyond. Thus, early detection and confirmation are of paramount importance. The normalized axial-shear strain area (NASSA) feature from the axial-shear strain elastogram (ASSE) has been shown to be a feature that can identify the boundary-bonding conditions that are indicative of the presence of cancer. Recently, we investigated and reported on the potential of the NASSA feature for breast lesion classification into fibroadenomas and cancers. In this article, we investigate the size distribution of the lesions that were part of the previous study and analyze classification performance specifically on small lesions (BIRADS) ultrasound scores. The observers outlined the lesions on the sonograms and the lesion size (maximum circle-equivalent diameter in millimeters) was computed from this outline. The ASSE was automatically segmented and color-overlaid on the sonogram, and the NASSA feature from ASSE was computed semi-automatically. Receiver operating characteristic curves were then generated for the subset of cases involving small lesions. Box plots were produced for the two different lesion size groups, small and large, from a logistic regression classifier that was built previously. The results of our study show that approximately 38% and 22% of the fibroadenomas and cancers, respectively, were small. Furthermore, it was found that the NASSA feature resulted in a perfect classification of the small lesions, both in the training data and in the cross-validation. For lesions 10 mm had a difference of 0.52 ± 0.24 (p 10 mm). These results suggest that the ASSE feature can work equally well, even on small lesions, to improve the standard ultrasound BIRADS-based breast lesion classification of fibroadenoma and malignant tumors.
SMALL BREAST LESION CLASSIFICATION PERFORMANCE USING THE NORMALIZED AXIAL-SHEAR STRAIN AREA FEATURE
Thittai, Arun K.; Yamal, Jose-Miguel; Ophir, Jonathan
2013-01-01
Breast cancers that are found and confirmed because they are causing symptoms tend to be larger and are more likely to have already spread into the lymph nodes and beyond. Thus early detection and confirmation are of paramount importance. The normalized axial–shear strain area (NASSA) feature from the axial-shear strain elastogram (ASSE) has been shown to be a feature that can identify the boundary bonding conditions that are indicative of the presence of cancer. Recently, we investigated and reported on the potential of the NASSA feature for breast lesion classification into fibroadenomas and cancers. In this paper, we investigate the size distribution of the lesions that were part of the previous study and analyze classification performance specifically on small lesions (BIRADS® ultrasound scores. The observers outlined the lesions on the sonograms and the lesion size (maximum circle-equivalent diameter in mm) was computed from this outline. The ASSE was automatically segmented and color overlaid on the sonogram, and the NASSA feature from ASSE was computed semi–automatically. Receiver operating characteristic (ROC) curves were then generated for the subset of cases involving small lesions. Box-plots were produced for the two different lesion size groups, small and large, from a logistic regression classifier that was built previously. The results of our study show that approximately 38% and 22% of the fibroadenomas and cancers respectively were small. Further, it was found that the NASSA feature resulted in a perfect classification of the small lesions, both in the training data and in the cross-validation. For lesions 10 mm had a difference of 0.52 ± 0.24 (p10 mm). These results suggest that the ASSE feature can work equally well even on small lesions to improve the standard US BIRADS–based breast lesion classification of fibroadenoma and malignant tumors. PMID:23312961
Kuang, Ruixia; Wang, Zhiguo; Xu, Quanchen; Cai, Xia; Liu, Tao
2016-04-01
Mechanical strain is a key contributor in the pathogenesis of hypertrophic scarring, whose optimal stretch magnitudes to initiate the differentiation of normal skin fibroblasts into aberrant fibroblasts phenotype remains largely unresolved. Influence of varying cyclic strain magnitudes on cultured human normal skin fibroblasts and its transformation into hypertrophic scar fibroblast-like phenotype is investigated in this study. Cultured fibroblasts isolated from hypertrophic scar and normal skin tissue were subjected to cyclic mechanical stretching under individual 10%, 15%, and 20% strain magnitudes at a frequency of 0.1 Hz for 24 hours. Stretched normal skin fibroblasts demonstrated significantly increased rates of cell proliferation, and also apparently oriented away nearly perpendicular to the applied stretching direction. Interestingly, the applied 10% strains magnitude resulted in a markedly enhanced cell proliferative ability compared with that of 20% strain magnitude. Parameters involving the mechanotransduction signaling, such as integrin β1 and P130Cas, were significantly improved at both mRNA and protein levels in the stretched normal skin fibroblasts, which was demonstrated in a negative magnitude-dependent manner. In addition, 10% strains magnitude triggered the highest expression levels of growth factor TGF-β1 and collagen matrix in stretched normal skin fibroblasts. Collectively, these results indicate that the 10% stretching magnitude, of the 3 strain magnitudes studied, is most effective for triggering the optimal mechanotransduction effects and biological responses inside cultured skin fibroblasts. The demonstrable conversion of normal skin fibroblasts into hypertrophic scar fibroblasts was also observed when 10% stretching magnitude was applied to cultured fibroblasts in vitro.
WANG Yang; TU Zhan-Chun
2013-01-01
The Carnot-like heat engines are classified into three types (normal-,sub-and,super-dissipative) according to relations between the minimum irreversible entropy production in the "isothermal" processes and the time for completing those processes.The efficiencies at maximum power of normal-,sub-and super-dissipative Carnot-like heat engines are proved to be bounded between ηc/2 and ηc/ (2-ηc),ηc/2 and ηc,0 and ηc/ (2-ηc),respectively.These bounds are also shared by linear,sub-and super-linear irreversible Carnot-like engines [Tu and Wang,Europhys.Lett.98 (2012) 40001] although the dissipative engines and the irreversible ones are inequivalent to each other.
Dal Maso, Fabien; Marion, Patrick; Begon, Mickaël
2016-09-01
To identify the smallest combinations of maximum voluntary isometric contraction (MVIC) tests that produce near-maximum voluntary activation (MVA) for a large proportion of participants for the shoulder girdle muscles. Cross-sectional study. Research center. Healthy participants (N=38). Not applicable. The electromyography of 12 shoulder muscles was recorded while participants performed 15 MVIC tests. The smallest combinations of MVIC tests that met our acceptance criterion (ie, produce 90% of MVA for 90% of participants) were identified. Optimal combinations were identified for each of the 12 muscles individually and for the 12 muscles simultaneously. Electromyographic activation levels of the 95th highest percentile obtained with our optimal combinations and with the Four Normalization Tests previously recommended were compared using paired t tests. Between 2 and 6 MVIC tests were required for each of the 12 muscles, and 12 MVIC tests were required for the 12 muscles to meet the acceptance criterion. These optimal combinations produced electromyographic activation levels of the 95th highest percentile comprised between 97% and 100% of MVA. These electromyographic activation levels were significantly higher than the electromyographic activation levels obtained with the Four Normalization Tests. Although the number of MVIC tests to normalize 12 shoulder muscles was increased compared with previous recommendations, the proposed method ensures that near-MVA (>90%) was obtained for a large proportion of participants (>90%). Moreover, because electromyographic activation levels of the 95th highest percentile were at least 97% of MVA, the identified combinations could reduce the interparticipant variability. The proposed combinations could help to improve electromyographic normalization and therefore reduce the misinterpretations regarding shoulder muscle activation levels. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All
Isacco, L; Thivel, D; Duclos, M; Aucouturier, J; Boisseau, N
2014-06-01
Fat mass localization affects lipid metabolism differently at rest and during exercise in overweight and normal-weight subjects. The aim of this study was to investigate the impact of a low vs high ratio of abdominal to lower-body fat mass (index of adipose tissue distribution) on the exercise intensity (Lipox(max)) that elicits the maximum lipid oxidation rate in normal-weight women. Twenty-one normal-weight women (22.0 ± 0.6 years, 22.3 ± 0.1 kg.m(-2)) were separated into two groups of either a low or high abdominal to lower-body fat mass ratio [L-A/LB (n = 11) or H-A/LB (n = 10), respectively]. Lipox(max) and maximum lipid oxidation rate (MLOR) were determined during a submaximum incremental exercise test. Abdominal and lower-body fat mass were determined from DXA scans. The two groups did not differ in aerobic fitness, total fat mass, or total and localized fat-free mass. Lipox(max) and MLOR were significantly lower in H-A/LB vs L-A/LB women (43 ± 3% VO(2max) vs 54 ± 4% VO(2max), and 4.8 ± 0.6 mg min(-1)kg FFM(-1)vs 8.4 ± 0.9 mg min(-1)kg FFM(-1), respectively; P normal-weight women, a predominantly abdominal fat mass distribution compared with a predominantly peripheral fat mass distribution is associated with a lower capacity to maximize lipid oxidation during exercise, as evidenced by their lower Lipox(max) and MLOR. Copyright © 2014 Elsevier Masson SAS. All rights reserved.
Devi, Seema; Agarwal, Asha; Pandey, Kiran; Pradhan, Asima
2015-03-01
Reflectance spectroscopy contains information of scatterers and absorbers present inside biological tissues and has been successfully used to diagnose disease. Success of any diagnostic tool depends upon the potential of statistical algorithm to extract appropriate diagnostic features from the measured optical data. In our recent study, we have used the potential of the classification algorithm, Nonlinear Maximum Representation and Discrimination Features (NMRDF) to extract important diagnostic features from reflectance spectra of normal and dysplastic human cervical tissue. This NMRDF algorithm uses the higher order correlation information in the input data, which helps to represent the asymmetrically distributed data and provides the closed form solution of the nonlinear transform for maximum discrimination. We have recorded unpolarized, co and cross-polarized reflectance spectra from 350nm to 650nm, illuminating the human cervical tissue epithelium with white light source. A total of 139 samples were divided into training and validation data sets. The input parameters were optimized using training data sets to extract the appropriate nonlinear features from the input reflectance spectra. These extracted nonlinear features are used as input for nearest mean classifier to calculate the sensitivity and specificity for both training as well as validation data sets. We have observed that co-polarized components provide maximum sensitivity and specificity compared to cross-polarized components and unpolarized data. This is expected since co-polarized light provides subsurface information while cross-polarized and unpolarized data mask the vital epithelial information through high diffuse scattering.
Prediction of Maximum Strain in Finocyl Port Case-bonded Solid Propellants under Pressure Loading
Himanshu Shekhar
2006-07-01
Full Text Available Finite element analysis of case-bonded solid propellants in finocyl port configuration hasbeen carried out using finite element method. The parametric studies have also been conductedfor loading conditions, material properties, and geometrical configurations. The results arepresented in the form of a universal power law, which can be utilised for primary assessmentof peak strain in any finocyl port propellant configuration without using finite element software.This eliminates dependence on finite element software for structural integrity analysis of solidpropellants in finocyl port configuration under port pressurisation. The results obtained by finiteelement analysis and power law are in close agreement.
Natural Examples of Olivine Lattice Preferred Orientation Patterns With a Flow-Normal a-Axis Maximum
Mizukami, T.; Wallis, S.; Yamamoto, J.
2004-12-01
Olivine lattice preferred orientation (LPO) due to ductile deformation is one of the main causes of mechanical anisotropy in the upper mantle and the patterns are useful to infer the direction of mantle flow from the seismic anisotropy in various settings. In subduction zones the mantle anisotropy near subduction boundaries suggests that olivine a-axes are arranged roughly perpendicular to plate motion. This anisotropy has been attributed to localized subduction-normal flow, applying a common type of olivine LPO with a `flow-parallel' a-axis maximum to the mantle. However, a recent deformational experiment provides an alternative interpretation that the B-type LPO with a `flow-normal' a-axis maximum can be developed in water-rich mantle above subducting slab. We document the widespread occurrence of B-type LPO in the Higashi-akaishi peridotite body, SW Japan, and examine the physical conditions in which it was formed. Our structural studies define four deformational phases in the Higashi-akaishi body (D1-D4) that are related to the tectonic evolution in the Cretaceous subduction zone at the Eurasian margin. The main deformational stage, D2, is associated with dynamic recrystallization of olivine to form porphyroclastic microstructure consisting of clear olivine neoblasts and porphyroclasts with abundant micro-inclusions. Parallel alginment of olivine neoblasts defines a stretching lineation (L2) and tectonic foliation (S2) and the D2 olivine LPO is identified as the B-type fabric with a-axes normal to L2, b-axes normal to S2 and c-axes parallel to L2. Micro-Raman spectroscopic analyses reveal that the syn-D2 micro-inclusions include hydrous minerals such as serpentine, indicating water-rich conditions for the D2 deformation. Garnet-orthopyroxene geothermobarometry applied to the D2 garnet peridotite reveals that the D2 stage was associated with the almost isothermal burial (700-800C, 2-3GPa). These D2 physical conditions in which the B-type LPO was formed are
Philipsen, Kirsten Riber; Christiansen, Lasse Engbo; Mandsberg, Lotte Frigaard
2008-01-01
with an exponentially decaying function of the time between observations is suggested. A model with a full covariance structure containing OD-dependent variance and an autocorrelation structure is compared to a model with variance only and with no variance or correlation implemented. It is shown that the model...... are used for parameter estimation. The data is log-transformed such that a linear model can be applied. The transformation changes the variance structure, and hence an OD-dependent variance is implemented in the model. The autocorrelation in the data is demonstrated, and a correlation model...... that best describes data is a model taking into account the full covariance structure. An inference study is made in order to determine whether the growth rate of the five bacteria strains is the same. After applying a likelihood-ratio test to models with a full covariance structure, it is concluded...
PREDICTION OF MAXIMUM CREEP STRAIN OF HIGH PERFORMANCE STEEL FIBER REINFORCED CONCRETE
Mishina Alexandra Vasil'evna
2012-12-01
Full Text Available The strongest research potential is demonstrated by the areas of application of high performance steel fiber reinforced concrete (HPSFRC. The research of its rheological characteristics is very important for the purposes of understanding its behaviour. This article is an overview of an experimental study of UHSSFRC. The study was carried out in the form of lasting creep tests of HPSFRC prism specimen, loaded by stresses of varied intensity. The loading was performed at different ages: 7, 14, 28 and 90 days after concreting. The stress intensity was 0.3 and 0.6 Rb; it was identified on the basis of short-term crush tests of similar prism-shaped specimen, performed on the same day. As a result, values of ultimate creep strains and ultimate specific creep of HPSFRC were identified. The data was used to construct an experimental diagramme of the ultimate specific creep on the basis of the HPSFRC loading age if exposed to various stresses. The research has resulted in the identification of a theoretical relationship that may serve as the basis for the high-precision projection of the pattern of changes in the ultimate specific creep of HPSFRC, depending on the age of loading and the stress intensity.
Befus, M; Mukherjee, D V; Herzig, C T A; Lowy, F D; Larson, E
2017-07-01
Prisons/jails are thought to amplify the transmission of Staphylococcus aureus (SA) particularly methicillin-resistant SA infection and colonisation. Two independently pooled cross-sectional samples of detainees being admitted or discharged from two New York State maximum-security prisons were used to explore this concept. Private interviews of participants were conducted, during which the anterior nares and oropharynx were sampled and assessed for SA colonisation. Log-binomial regression and correspondence analysis (CA) were used to evaluate the prevalence of colonisation at entry as compared with discharge. Approximately 51% of admitted (N = 404) and 41% of discharged (N = 439) female detainees were colonised with SA. Among males, 59% of those admitted (N = 427) and 49% of those discharged (N = 393) were colonised. Females had a statistically significant higher prevalence (1·26: P = 0·003) whereas males showed no significant difference (1·06; P = 0·003) in SA prevalence between entry and discharge. CA demonstrated that some strains, such as spa types t571 and t002, might have an affinity for certain mucosal sites. Contrary to our hypothesis, the prison setting did not amplify SA transmission, and CA proved to be a useful tool in describing the population structure of strains according to time and/or mucosal site.
Karsens Harma A
2008-02-01
Full Text Available Abstract Background Array-based comparative genome hybridization (aCGH is commonly used to determine the genomic content of bacterial strains. Since prokaryotes in general have less conserved genome sequences than eukaryotes, sequence divergences between the genes in the genomes used for an aCGH experiment obstruct determination of genome variations (e.g. deletions. Current normalization methods do not take into consideration sequence divergence between target and microarray features and therefore cannot distinguish a difference in signal due to systematic errors in the data or due to sequence divergence. Results We present supervised Lowess, or S-Lowess, an application of the subset Lowess normalization method. By using a predicted subset of array features with minimal sequence divergence between the analyzed strains for the normalization procedure we remove systematic errors from dual-dye aCGH data in two steps: (1 determination of a subset of conserved genes (i.e. likely conserved genes, LCG; and (2 using the LCG for subset Lowess normalization. Subset Lowess determines the correction factors for systematic errors in the subset of array features and normalizes all array features using these correction factors. The performance of S-Lowess was assessed on aCGH experiments in which differentially labeled genomic DNA fragments of Lactococcus lactis IL1403 and L. lactis MG1363 strains were hybridized to IL1403 DNA microarrays. Since both genomes are sequenced and gene deletions identified, the success rate of different aCGH normalization methods in detecting these deletions in the MG1363 genome were determined. S-Lowess detects 97% of the deletions, whereas other aCGH normalization methods detect up to only 60% of the deletions. Conclusion S-Lowess is implemented in a user-friendly web-tool accessible from http://bioinformatics.biol.rug.nl/websoftware/s-lowess. We demonstrate that it outperforms existing normalization methods and maximizes
Matthew D. Beekley
2006-07-01
Full Text Available Sumo wrestling is unique in combat sport, and in all of sport. We examined the maximum aerobic capacity and body composition of sumo wrestlers and compared them to untrained controls. We also compared "aerobic muscle quality", meaning VO2max normalized to predicted skeletal muscle mass (SMM (VO2max /SMM, between sumo wrestlers and controls and among previously published data for male athletes from combat, aerobic, and power sports. Sumo wrestlers, compared to untrained controls, had greater (p < 0.05 body mass (mean ± SD; 117.0 ± 4.9 vs. 56.1 ± 9.8 kg, percent fat (24.0 ± 1.4 vs. 13.3 ± 4.5, fat-free mass (88.9 ± 4.2 vs. 48.4 �� 6.8 kg, predicted SMM (48.2 ± 2.9 vs. 20.6 ± 4.7 kg and absolute VO2max (3.6 ± 1.3 vs. 2.5 ± 0.7 L·min-1. Mean VO2max /SMM (ml·kg SMM-1·min-1 was significantly different (p < 0.05 among aerobic athletes (164.8 ± 18.3, combat athletes (which was not different from untrained controls; 131.4 ± 9.3 and 128.6 ± 13.6, respectively, power athletes (96.5 ± 5.3, and sumo wrestlers (71.4 ± 5.3. There was a strong negative correlation (r = - 0.75 between percent body fat and VO2max /SMM (p < 0.05. We conclude that sumo wrestlers have some of the largest percent body fat and fat-free mass and the lowest "aerobic muscle quality" (VO2max /SMM, both in combat sport and compared to aerobic and power sport athletes. Additionally, it appears from analysis of the relationship between SMM and absolute VO2max for all sports that there is a "ceiling" at which increases in SMM do not result in additional increases in absolute VO2max
Chih-Tung Chen
2010-01-01
Full Text Available Growth strata analysis is an useful tool in understanding kinematics and the evolution of active faults as well as the close relationship between sedimentation and tectonics. Here we present the Shanchiao Fault as a case study which is an active normal fault responsible for the formation of the 700-m-thick late Quaternary deposits in Taipei Basin at the northern tip of the Taiwan mountain belt. We compiled a sedimentary record, particularly the depositional facies and their dated ages, at three boreholes (SCF-1, SCF-2 and WK-1, from west to east along the Wuku Profile that traverses the Shanchiao Fault at its central segment. By incorporating the global sea level change curve, we find that thickness changes of sediments and changes of depositional environments in the Wuku area are in a good agreement with a rapid sea level rise since the Last Glacial Maximum (LGM of about 23 ka. Combining depositional facies changes and their ages with their thickness, we are able to introduce a simple back-stripping method to reconstruct the evolution of growing strata across the Shanchiao Fault since the LGM. We then estimate the vertical tectonic slip rate since 23 ka, which exhibits 2.2 mm yr-1 between SCF-2 and WK-1 and 1.1 mm yr-1 between SCF-1 and SCF-2. We also obtain the Holocene tectonic subsidence rate of 2.3 mm yr-1 at WK-1 and 0.9 mm yr-1 at SCF-2 since 8.4 ka. We thus conclude that the fault zone consists of a high-angle main fault to the east between SCF-2 and WK-1 and a western lower-angle branch fault between SCF-1 and SCF-2, resembling a tulip structure developed under sinistral transtensional tectonism. We find that a short period of 600-yr time span in 9 - 8.4 ka shows important tectonic subsidence of 7.4 and 3.3 m for the main and branch fault, respectively, consistent with possible earthquake events proposed by previous studies during that time. A correlation between geomorphology and subsurface geology in the Shanchiao Fault zone shows
Shear-coupled grain-boundary migration dependence on normal strain/stress
Combe, N.; Mompiou, F.; Legros, M.
2017-08-01
In specific conditions, grain-boundary (GB) migration occurs in polycrystalline materials as an alternative vector of plasticity compared to the usual dislocation activity. The shear-coupled GB migration, the expected most efficient GB based mechanism, couples the GB motion to an applied shear stress. Stresses on GB in polycrystalline materials seldom have, however, a unique pure shear component. This work investigates the influence of a normal strain on the shear coupled migration of a Σ 13 (320 )[001 ] GB in a copper bicrystal using atomistic simulations. We show that the yield shear stress inducing the GB migration strongly depends on the applied normal stress. Beyond, the application of a normal stress on this GB qualitatively modifies the GB migration: while the Σ 13 (320 )[001 ] GB shear couples following the 〈110 〉 migration mode without normal stress, we report the observation of the 〈010 〉 mode under a sufficiently high tensile normal stress. Using the nudge elastic band method, we uncover the atomistic mechanism of this 〈010 〉 migration mode and energetically characterize it.
无
2007-01-01
Firstly, using the damage model for rock based on Lemaitre hypothesis about strain equivalence, a new technique for measuring strength of rock micro-cells by adopting the Mohr-Coulomb criterion was developed, and a statistical damage evolution equation was established based on the property that strength of micro-cells is consistent with normal distribution function, through discussing the characteristics of random distributions for strength of micro-cells, then a statistical damage constitutive model that can simulate the full process of rock strain softening under specific confining pressure was set up. Secondly, a new method to determine the model parameters which can be applied to the situations under different confining pressures was proposed, by deeply studying the relations between the model parameters and characteristic parameters of the full stress-strain curve under different confining pressures. Therefore, a unified statistical damage constitutive model for rock softening which can reflect the effect of different confining pressures was set up. This model makes the physical property of model parameters explicit, contains only conventional mechanical parameters, and leads its application more convenient. Finally, the rationality of this model and its parameters-determining method were identified via comparative analyses between theoretical and experimental curves.
Polygenic expression of teratozoospermia and normal fertility in B10.MOL-TEN1 mouse strain.
Hirawatari, Keitaro; Hanzawa, Naoto; Kuwahara, Maki; Aoyama, Hiroaki; Miura, Ikuo; Wakana, Shigeharu; Gotoh, Hideo
2015-05-01
Subfertility and infertility are two major reproductive health problems in human and domestic animals. The contribution of the genotype to these conditions is poorly understood. To examine the genetic basis of male subfertility, we analyzed its relationship to sperm morphology in B10.MOL-TEN1 mice, which shows high-frequencies (about 50%) of morphologically abnormal sperm. Drastic histological changes were also found in the testis of the B10.MOL-TEN1. Segregation analysis showed that the abnormal sperm phenotype in B10.MOL-TEN1 was inherited and was predictably controlled by at least three loci. We also found that male fertility of this strain was normal. These findings indicate a complicated relationship between sperm morphology and male subfertility.
Minukhin V.V.
2015-05-01
Full Text Available Nasopharinheal carriage of bacteria may play a central role in the development and spread of respiratory infections. In addition, so-called "healthy" carriage is often transformed under the influence of various factors into an active infection.It is necessary to take into account not only the range of possible pathogens, but also trends in the development of antibiotic resistance of leading etiologic agents while choosing tactics of antimicrobial therapy. The investigation was designed to study the role of normal microflora of the nasopharynx as a reservoir of resistant strains of respiratory infections. Materials and Methods. Fifty three healthy individuals and 168 patients with acute upper respiratory tract infections who had been treated in CEHC "Kharkiv Municipal Clinical Hospital № 30" were examined. Microbiological study included isolation and identification of pathogens in accordance with the Order of the Ministry of Health Care № 535 from 22.04.1985., determination of the sensitivity of microorganisms to antibiotics by diffusion method according to the Order of the Ministry of Health Care of Ukraine № 167 from 05.04.2007. Results and discussion. Bacteriological study of nasal swabs of healthy people showed that the composition of the microflora of the nasopharynx contained potentially pathogenic microorganisms. Among the isolated microorganisms essential place was occupied by S. epidermidis and S. aureus, both in monoculture and association. Epidermal staphylococcus was isolated in 36 % and Staphylococcus aureus in 27% of cases. Pneumococcus and hemolytic streptococcus of group A were isolated in 23 and 14% of cases, respectively. One hundred and eighty strains of opportunistic microorganisms were isolated in the study of nasopharyngeal microflora of patients with acute upper respiratory tract infection. The leading role belonged to S. pyogenes (40.5% and S.epidermidis (33,3%. S. aureus (12,8% and S.pneumoniae (10,6% were next
Pathan, Faraz; D'Elia, Nicholas; Nolan, Mark T; Marwick, Thomas H; Negishi, Kazuaki
2017-01-01
Recent advances in the assessment of myocardial function have facilitated the direct measurement of atrial function using speckle-tracking echocardiography. Currently, normal reference ranges for atrial function using speckle-tracking echocardiography are based on a few initial studies, with variations among modestly sized (n = 100-350) studies. The authors searched the PubMed, Embase, and Scopus databases for the key terms "left atrial/atrial/atrium" and "strain/function/deformation/stiffness" and "speckle tracking/Velocity Vector Imaging/edge tracking." Studies of global left atrial function using speckle-tracking were selected if they involved >30 normal or healthy participants without any cardiac risk factors. Normal ranges for reservoir strain, conduit strain, and contractile strain were computed using a random-effects model. Meta-regression and subgroup analysis was performed to explore between-study heterogeneity. Forty studies (2,542 healthy subjects) satisfied the inclusion criteria. Meta-analysis revealed a normal reference range for reservoir strain of 39% (95% CI, 38%-41%, from 40 articles), for conduit strain of 23% (95% CI, 21%-25%, from 14 articles), and for contractile strain of 17% (95% CI, 16%-19%, from 18 articles). Meta-regression identified heart rate (P = .02) and body surface area (P = .003) as contributors to this heterogeneity. Subgroup analyses revealed heterogeneity due to sample size (n > 100 vs N < 100, P = .02). The normal reference ranges for the three components of left atrial function are demonstrated. The between-study heterogeneity is explained partly by heart rate, body surface area, and sample size. Copyright © 2016 American Society of Echocardiography. Published by Elsevier Inc. All rights reserved.
2000-01-01
This paper describes the influences of soil parameters on bifurcation analysis，using a non-coaxial Camclay model of normally consolidated cohesive soils during undrained shear under plane strain condition. The soil parameters are estmated from plasticity index. The soils exhibited a wide range in plasticity index，from lO−50． The results indicate that bifurcation behavior using a soil with lower plasticity index occurs at a larger stress ratio and a smaller strain compared to soils with ...
Cardiac strain between normal weight and overweight workers in hot/humid weather in the Persian Gulf
Habibollah Dehghan
2013-01-01
Conclusions: Based on the study results, it is concluded that the severity of cardiac strain was higher in overweight workers compared with that in normal weight workers. Hence, in order to decrease the cardiac strain, selecting overweight individuals for these jobs should be avoided and also some vital intervention for losing weight should be implemented such as nutrition education and encouraging them regarding physical activity.
Cardiac Strain between Normal Weight and Overweight Workers in Hot/Humid Weather in the Persian Gulf
Habibollah Dehghan; Seyed Bagher Mortazavi; Mohammad Javad Jafari; Mohammad Reza Maracy
2013-01-01
Background: In hot weather, overweight and obesity are considered as significant risk factors for the incidence of cardiac strain in workers. This study was aimed to compare cardiac strain among overweight and normal-weight workers in hot, humid conditions in the south of Iran. Methods: This cross-sectional study was conducted on 71 workers in the south of Iran in summer 2010. The heart rate was measured at rest and at actual work. Cardiac strain based on working heart rate (WHR), the rel...
Dehghan, Habibollah; Mortazavi, Seyed B.; Jafari, Mohammad J.; Maracy, Mohammad R.
2013-01-01
Background: In the hot weather, overweight and obesity are considered as significant risk factors for the incidence of cardiac strain in workers. This study is aimed at comparing the cardiac strain among overweight and normal-weighted workers, in the hot, humid conditions of the south of Iran. Materials and Methods: This cross-sectional study was conducted on 71 workers in the south of Iran, in the summer of 2010. The heart rate was measured at rest and at actual work. Cardiac strain based on...
Sung Woo Park; Byung Kwan Oh; Hyo Seon Park
2015-01-01
The safety of a multi-span waler beam subjected simultaneously to a distributed load and deflections at its supports can be secured by limiting the maximum stress of the beam to a specific value to prevent the beam from reaching a limit state for failure or collapse. Despite the fact that the vast majority of accidents on construction sites occur at waler beams in retaining wall systems, no safety monitoring model that can consider deflections at the supports of the beam is available. In this...
Perepelyuk, Maryna; Chin, LiKang; Cao, Xuan; van Oosten, Anne; Shenoy, Vivek B; Janmey, Paul A; Wells, Rebecca G
2016-01-01
Tissues including liver stiffen and acquire more extracellular matrix with fibrosis. The relationship between matrix content and stiffness, however, is non-linear, and stiffness is only one component of tissue mechanics. The mechanical response of tissues such as liver to physiological stresses is not well described, and models of tissue mechanics are limited. To better understand the mechanics of the normal and fibrotic rat liver, we carried out a series of studies using parallel plate rheometry, measuring the response to compressive, extensional, and shear strains. We found that the shear storage and loss moduli G' and G" and the apparent Young's moduli measured by uniaxial strain orthogonal to the shear direction increased markedly with both progressive fibrosis and increasing compression, that livers shear strain softened, and that significant increases in shear modulus with compressional stress occurred within a range consistent with increased sinusoidal pressures in liver disease. Proteoglycan content and integrin-matrix interactions were significant determinants of liver mechanics, particularly in compression. We propose a new non-linear constitutive model of the liver. A key feature of this model is that, while it assumes overall liver incompressibility, it takes into account water flow and solid phase compressibility. In sum, we report a detailed study of non-linear liver mechanics under physiological strains in the normal state, early fibrosis, and late fibrosis. We propose a constitutive model that captures compression stiffening, tension softening, and shear softening, and can be understood in terms of the cellular and matrix components of the liver.
van Hijum, Sacha A. F. T.; Baerends, Richard J. S.; Zomer, Aldert L.; Karsens, Harma A.; Martin-Requena, Victoria; Trelles, Oswaldo; Kok, Jan; Kuipers, Oscar P.
2008-01-01
Background: Array-based comparative genome hybridization (aCGH) is commonly used to determine the genomic content of bacterial strains. Since prokaryotes in general have less conserved genome sequences than eukaryotes, sequence divergences between the genes in the genomes used for an aCGH experiment
Pre-Test Assessment of the Use Envelope of the Normal Force of a Wind Tunnel Strain-Gage Balance
Ulbrich, N.
2016-01-01
The relationship between the aerodynamic lift force generated by a wind tunnel model, the model weight, and the measured normal force of a strain-gage balance is investigated to better understand the expected use envelope of the normal force during a wind tunnel test. First, the fundamental relationship between normal force, model weight, lift curve slope, model reference area, dynamic pressure, and angle of attack is derived. Then, based on this fundamental relationship, the use envelope of a balance is examined for four typical wind tunnel test cases. The first case looks at the use envelope of the normal force during the test of a light wind tunnel model at high subsonic Mach numbers. The second case examines the use envelope of the normal force during the test of a heavy wind tunnel model in an atmospheric low-speed facility. The third case reviews the use envelope of the normal force during the test of a floor-mounted semi-span model. The fourth case discusses the normal force characteristics during the test of a rotated full-span model. The wind tunnel model's lift-to-weight ratio is introduced as a new parameter that may be used for a quick pre-test assessment of the use envelope of the normal force of a balance. The parameter is derived as a function of the lift coefficient, the dimensionless dynamic pressure, and the dimensionless model weight. Lower and upper bounds of the use envelope of a balance are defined using the model's lift-to-weight ratio. Finally, data from a pressurized wind tunnel is used to illustrate both application and interpretation of the model's lift-to-weight ratio.
Strained and unconstrained multivariate normal finite mixture modeling of Piagetian data.
Dolan, C.V.; Jansen, B.R.J.; van der Maas, H.L.J.
2004-01-01
We present the results of multivariate normal mixture modeling of Piagetian data. The sample consists of 101 children, who carried out a (pseudo-)conservation computer task on four occasions. We fitted both cross-sectional mixture models, and longitudinal models based on a Markovian transition
Nestorović, M. D.; Triantafyllidis, N.
2004-04-01
A limiting factor in the design of fiber-reinforced composites is their failure under axial compression along the fiber direction. These critical axial stresses are significantly reduced in the presence of shear stresses. This investigation is motivated by the desire to study the onset of failure in fiber-reinforced composites under arbitrary multi-axial loading and in the absence of the experimentally inevitable imperfections and finite boundaries. By using a finite strain continuum mechanics formulation for the bifurcation (buckling) problem of a rate-independent, perfectly periodic (layered) solid of infinite extent, we are able to study the influence of load orientation, material properties and fiber volume fraction on the onset of instability in fiber-reinforced composites. Two applications of the general theory are presented in detail, one for a finitely strained elastic rubber composite and another for a graphite-epoxy composite, whose constitutive properties have been determined experimentally. For the latter case, extensive comparisons are made between the predictions of our general theory and the available experimental results as well as to the existing approximate structural theories. It is found that the load orientation, material properties and fiber volume fraction have substantial effects on the onset of failure stresses as well as on the type of the corresponding mode (local or global).
Banerjee, D; Basu, M; Choudhury, I; Chatterjee, G C
1982-01-01
Superoxide dismutase activity in virulent strains of Agrobacterium tumefaciens was found to be higher than that in avirulent strains. Polyacrylamide gel electrophoresis revealed two isoenzymes in both these strains. These isoenzymes are suggested to be iron and manganese containing superoxide dismutases. Crown gall tumor cells of the plant Bryophyllum calycinum were found to have higher superoxide dismutase activity than the normal plant cells. Polyacrylamide gel electrophoresis revealed two isoenzymes in both normal and crown gall tumor cells. Advantages of the higher superoxide dismutase activities in respect of the survival of virulent strains of A. tumefaciens and crown gall tumor growth have been discussed.
Rolf, Daniel; Schmidt, Rene; Möllers, Mareike; Oelmeier de Murcia, Kathrin; Braun, Janina; Hammer, Kerstin; Klockenbusch, Walter; Schmitz, Ralf
2017-07-28
To evaluate segmental left (LV-S) and right (RV-S) ventricular strain as well as longitudinal mechanical myocardial dyssynchrony as a time difference between peaks in strain of both ventricles in fetuses (two-chamber-dyssynchrony, 2C-DYS) using speckle tracking echocardiography (STE). The aim of our study was to evaluate the influence of data acquisition on the results of STE measurement using different ultrasound probes. We prospectively recorded cardiac cycles of four-chamber views of 56 normal fetuses with three different ultrasound probes and analyzed them offline with speckle tracking imaging software. Furthermore, we looked at a possible influence of heartbeat variability (beat-to-beat variability). The evaluation of the parameters was feasible with all three probes in 53 cases. There was no influence of heartbeat variability and no noticeable differences in 2C-DYS, LV-S and RV-S in all cases and for all three probes determined. Assessment of strain and dyssynchrony using STE with three different probes is comparable. Further research is needed to validate dyssynchrony as a predictor for fetal outcome.
Arcidiacono C
2009-02-01
Full Text Available Abstract Background Recent advances in technology have provided the opportunity for off-line analysis of digital video-clips of two-dimensional (2-D echocardiographic images. Commercially available software that follows the motion of cardiac structures during cardiac cycle computes both regional and global velocity, strain, and strain rate (SR. The present study aims to evaluate the clinical applicability of the software based on the tracking algorithm feature (studied for cardiology purposes and to derive the reference values for longitudinal and circumferential strain and SR of the left ventricle in a normal population of children and young adults. Methods 45 healthy volunteers (30 adults: 19 male, 11 female, mean age 37 ± 6 years; 15 children: 8 male, 7 female, mean age 8 ± 2 years underwent transthoracic echocardiographic examination; 2D cine-loops recordings of apical 4-four 4-chamber (4C and 2-chamber (2C views and short axis views were stored for off-line analysis. Computer analyses were performed using specific software relying on the algorithm of optical flow analysis, specifically designed to track the endocardial border, installed on a Windows™ based computer workstation. Inter and intra-observer variability was assessed. Results The feasibility of measurements obtained with tissue tracking system was higher in apical view (100% for systolic events; 64% for diastolic events than in short axis view (70% for systolic events; 52% for diastolic events. Longitudinal systolic velocity decreased from base to apex in all subjects (5.22 ± 1.01 vs. 1.20 ± 0.88; p Values of global systolic SR, both longitudinal and circumferential, were significantly higher in children than in adults (-1.3 ± 0.2, vs. -1.11 ± 0.2, p = 0.006; -1.9 ± 0.6 vs. -1.6 ± 0.5, p = 0.0265, respectively. No significant differences in longitudinal and circumferential systolic velocities were identified for any segment when comparing adults with children. Conclusion
Reyes, Juan C.; Kalkan, Erol
2012-01-01
In the United States, regulatory seismic codes (for example, California Building Code) require at least two sets of horizontal ground-motion components for three-dimensional (3D) response history analysis (RHA) of building structures. For sites within 5 kilometers (3.1 miles) of an active fault, these records should be rotated to fault-normal and fault-parallel (FN/FP) directions, and two RHAs should be performed separately—when FN and then FP direction are aligned with transverse direction of the building axes. This approach is assumed to lead to two sets of responses that envelope the range of possible responses over all nonredundant rotation angles. The validity of this assumption is examined here using 3D computer models of single-story structures having symmetric (torsionally stiff) and asymmetric (torsionally flexible) layouts subjected to an ensemble of near-fault ground motions with and without apparent velocity pulses. In this parametric study, the elastic vibration period is varied from 0.2 to 5 seconds, and yield-strength reduction factors, R, are varied from a value that leads to linear-elastic design to 3 and 5. Further validations are performed using 3D computer models of 9-story structures having symmetric and asymmetric layouts subjected to the same ground-motion set. The influence of the ground-motion rotation angle on several engineering demand parameters (EDPs) is examined in both linear-elastic and nonlinear-inelastic domains to form benchmarks for evaluating the use of the FN/FP directions and also the maximum direction (MD). The MD ground motion is a new definition for horizontal ground motions for use in site-specific ground-motion procedures for seismic design according to provisions of the American Society of Civil Engineers/Seismic Engineering Institute (ASCE/SEI) 7-10. The results of this study have important implications for current practice, suggesting that ground motions rotated to MD or FN/FP directions do not necessarily provide
Skjaerpe Terje
2003-04-01
Full Text Available Abstract Background Strain Rate Imaging shows the filling phases of the left ventricle to consist of a wave of myocardial stretching, propagating from base to apex. The propagation velocity of the strain rate wave is reduced in delayed relaxation. This study examined the relation between the propagation velocity of strain rate in the myocardium and the propagation velocity of flow during early filling. Methods 12 normal subjects and 13 patients with treated hypertension and normal systolic function were studied. Patients and controls differed significantly in diastolic early mitral flow measurements, peak early diastolic tissue velocity and peak early diastolic strain rate, showing delayed relaxation in the patient group. There were no significant differences in EF or diastolic diameter. Results Strain rate propagation velocity was reduced in the patient group while flow propagation velocity was increased. There was a negative correlation (R = -0.57 between strain rate propagation and deceleration time of the mitral flow E-wave (R = -0.51 and between strain rate propagation and flow propagation velocity and there was a positive correlation (R = 0.67 between the ratio between peak mitral flow velocity / strain rate propagation velocity and flow propagation velocity. Conclusion The present study shows strain rate propagation to be a measure of filling time, but flow propagation to be a function of both flow velocity and strain rate propagation. Thus flow propagation is not a simple index of diastolic function in delayed relaxation.
Walker, H. F.
1976-01-01
Likelihood equations determined by the two types of samples which are necessary conditions for a maximum-likelihood estimate are considered. These equations, suggest certain successive-approximations iterative procedures for obtaining maximum-likelihood estimates. These are generalized steepest ascent (deflected gradient) procedures. It is shown that, with probability 1 as N sub 0 approaches infinity (regardless of the relative sizes of N sub 0 and N sub 1, i=1,...,m), these procedures converge locally to the strongly consistent maximum-likelihood estimates whenever the step size is between 0 and 2. Furthermore, the value of the step size which yields optimal local convergence rates is bounded from below by a number which always lies between 1 and 2.
Miętka, K; Brzostek, K; Guz-Regner, K; Bugla-Płoskońska, G
2016-01-01
Yersinia enterocolitica is a common zoonotic pathogen and facultative intracellular bacterium which can survive within blood cells. Cattle and horses are considered a reservoir of Y. enterocolitica which often causes several serious syndromes associated with yersiniosis such as abortions, premature births or infertility. The aim of our investigation was to determine the vitality of Y. enterocolitica O:9 strains (Ye9) in bovine and horse sera (NBS and NHrS) and explain the role of outer membrane proteins (OMPs) in serum resistance of these bacteria. Our previous studies demonstrated moderate human serum (NHS) resistance of the wild type Ye9 strain, whereas mutants lacking YadA, Ail or OmpC remained sensitive to the bactericidal activity of NHS. The present study showed that the wild type of Ye9 strain was resistant to the bactericidal activity of both NHrS and NBS, while Ye9 mutants lacking the YadA, Ail and OmpC proteins were sensitive to NHrS and NBS as well as to NHS. The mechanisms of complement activation against Ye9 strains lacking Ail and YadA were distinguished, i.e. activation of the classical/lectin pathways decisive in the bactericidal mechanism of complement activation of NBS, parallel activation of the classical/lectin and alternative pathways of NHrS. In this research the mechanism of independent activation of the classical/lectin or the alternative pathway of NBS and NHrS against Ye9 lacking OmpC porin was also established. The results indicate that serum resistance of Ye9 is multifactorial, in which extracellular structures, i.e. outer membrane proteins (OMPs) such as Ail, OmpC or YadA, play the main role.
Kinkhabwala, Ali
2013-01-01
The most fundamental problem in statistics is the inference of an unknown probability distribution from a finite number of samples. For a specific observed data set, answers to the following questions would be desirable: (1) Estimation: Which candidate distribution provides the best fit to the observed data?, (2) Goodness-of-fit: How concordant is this distribution with the observed data?, and (3) Uncertainty: How concordant are other candidate distributions with the observed data? A simple unified approach for univariate data that addresses these traditionally distinct statistical notions is presented called "maximum fidelity". Maximum fidelity is a strict frequentist approach that is fundamentally based on model concordance with the observed data. The fidelity statistic is a general information measure based on the coordinate-independent cumulative distribution and critical yet previously neglected symmetry considerations. An approximation for the null distribution of the fidelity allows its direct conversi...
Ivanova, E I; Popkova, S M; Dzhioev, Iu P; Rakova, E B; Nemchenko, U M; Rychkova, L V
2014-11-01
In intestinal ecosystem, interchange of genetic material between different types of bacteria and other representatives of family Enterobacteriaceae results in development of types of normal colibacillus with genetic characteristics of pathogenicity. This occurrence can be considered as a theoretical substantiation for labeling such strains as pathobionts. The polymerase chain reaction was implemented to analyze 96 strains of different types of Escherichia coli (with normal and weak zymogenic activity and hemolytic activity) isolated from children with functional disorders of gastrointestinal tract. The purpose was to detect presence of gens coding capacity of toxin production (six1, stx2). In intestinal biotope of children, circulation of strains of Escherichia coli producing shiga toxin having no relation to pathogenic group being representatives of normal indigenous microbiota. The presence of gens stx1 and stx2 in various biochemical types of Escherichia coli permits establishing fact of forming of reservoir of potential pathogenicity in non-pathogenic forms of Escherichia coli. The presence of gen (verotoxin 1) in genome of various types of Escherichia coli isolated from one single biotope testifies possible horizontal transmission of factors of pathogenicity in intestinal biotope.
XU Shunshan; A. F. NIETO-SAMANIEGO; S. A. ALANIZ-(A)LVAREZ
2005-01-01
The Sierra de San Miguelito is a relatively uplifted area and is constituted by a large amount of silicic volcanic rocks with ages from middle to late Cenozoic. The normal faults of the Sierra de San Miguelito are Domino-style and nearly parallel. The cumulative length and displacement of the faults obey power-law distribution. The fractal dimension of the fault traces is -1.49. Using the multi-line one-dimensional sampling, the calculated exponent of cumulative fault displacements is -0.66. A cumulative curve combining measurements of all four sections yielded a slope of -0.63. The displacement-length plot shows a non-linear relationship and large dispersion of data. The large dispersion in the plot is mainly due to the fault linkage during faulting. An estimation of extensional strain due to the normal faults is ca. 0.1830.The bed extension strain is always less than or equal to the horizontal extension strain. The deformation in the Sierra de San Miguelito occurred near the surface, producing pervasive faults and many faults are too small to appear in maps and sections at common scales. The stretching produced by small faults reach ca. 33% of the total horizontal elongation.
Arellano-Reynoso, Beatriz; Suárez-Güemes, Francisco; Estrada, Félix Mejía; Michel-GómezFlores, Fernando; Hernández-Castro, Rigoberto; Acosta, Rómulo Beltrán; Díaz-Aparicio, Efrén
2013-02-01
A study was carried out in Pichucalco, Chiapas (Mexico) to determine whether recently calved cows or those that aborted shed Brucella. Serological diagnosis of brucellosis was made in all animals (209). Six of the cows that calved normally and two that aborted underwent a bacteriological study of milk and vaginal exudate. Brucella abortus was isolated from vaginal exudate samples in two 3- to 4-year-old seronegative first-birth cows that had calved normally. This was confirmed through bacteriological identification and PCR as a field strain and smooth phenotypes. We conclude that seronegative cows vaccinated with RB51 which calved normally and shed B. abortus in the vaginal exudate after calving could be a serious problem because these cows are overlooked in routine diagnoses and are a source of Brucella infection.
Kiatgamolchai, S
2000-01-01
gamma has the bowl shape with the minimum at x approx 0.25-0.3. These characteristics suggest a possible influence of alloy disorder scattering. The mobilities and activation energies of the carriers in the boron-doped cap vary between samples and this is believed to be due to boron-spike near the Si/Si-substrate interface, in some samples. The source of electron-like carrier is presently unknown. Magnetotransport properties of modulation-doped p-type Si sub 1 sub - sub x Ge sub x /Si and Si sub 1 sub - sub x Ge sub x /Si sub 1 sub - sub y Ge sub y heterostructures were studied, in the magnetic field range 0-12 T, and in the temperature range 0.35-300 K. The experimental data within the classical regime have been analysed by mobility spectrum analysis, in order to separate the influences of different parallel conduction paths. A new method of mobility spectrum analysis has been developed by the based on the concept of maximum-entropy, and this computation has been shown to overcome several drawbacks or limita...
夏天; 孔繁超
2008-01-01
本文我们提出了一些正则条件,这些条件减弱了Zhu and Wei(1997)文的条件.基于所提的正则条件,我们证明了指数族非线性模型参数最大似然估计的相合性和渐近正态性.我们的结果可被认为是Zhu and Wei(1997)工作的进一步改进.%This paper proposes some regularity conditions which weaken those given by Zhu & Wei (1997).On the basis of the proposed regularity conditions,the existence,the strong consistency and the asymptotic normality of maximum likelihood estimation(MLE)are proved in exponential family nonlinear models(EFNMs).Our results may be regarded as a further improvement of the work of Zhu & Wei(1997).
Arble, Jessica R; Lalley, Andrea L; Dyment, Nathaniel A; Joshi, Pujan; Shin, Dong-Guk; Gooch, Cynthia; Grawe, Brian; Rowe, David; Shearn, Jason T
2016-11-01
Identifying biological success criteria is needed to improve therapies, and one strategy for identifying them is to analyze the RNA transcriptome for successful and unsuccessful models of tendon healing. We have characterized the MRL/MpJ murine strain and found improved mechanical outcomes following a central patellar tendon (PT) injury. In this study, we evaluate the healing of the LG/J murine strain, which comprises 75% of the MRL/MpJ background, to determine if the LG/J also exhibits improved biomechanical properties following injury and to determine differentially expressed transcription factors across the C57BL/6, MRL/MpJ and the LG/J strains during the early stages of healing. A full-length, central PT defect was created in 16-20 week old MRL/MpJ, LG/J, and C57BL/6 murine strains. Mechanical properties were assessed at 2, 5, and 8 weeks post surgery. Transcriptomic expression was assessed at 3, 7, and 14 days following injury using a novel clustering software program to evaluate differential expression of transcription factors. Average LG/J structural properties improved to 96.7% and 97.2% of native LG/J PT stiffness and ultimate load by 8 weeks post surgery, respectively. We found the LG/J responded by increasing expression of transcription factors implicated in the inflammatory response and collagen fibril organization. The LG/J strain returns to normal structural properties by 8 weeks, with steadily increasing properties at each time point. Future work will characterize the cell populations responding to injury and investigate the role of the differentially expressed transcription factors during healing.
侯海军; 智光; 张晓娟; 周肖; 徐勇
2008-01-01
目的 应用速度向量成像定量分析正常成人右室心肌应变和应变率.方法 选取健康成人32例,在心尖四腔观测量右室游离壁和室间隔右室面基底段、中间段、心尖段6个节段的应变和应变率收缩期峰值,Simpson法测量右室容量及射血分数.结果 Simpson法及速度向量成像法测量的正常右室射血分数高度相关(r=0.91,P＜0.01),右室游离壁基底段和中间段的应变、应变率均高于心尖段(P＜0.05).二者的应变和应变率差异均无统计学意义(P＞0.05),室间隔右室面的应变和应变率也有相同的规律,右室游离壁基底段和中间段的应变和应变率高于相应室间隔节段(P＜0.05),右室游离壁心尖段和室间隔心尖段的应变和应变率无明显差异,右室的应变和应变率和年龄无明显的相关性.结论 速度向量成像技术可以准确定量评估右室室壁应变和应变率.%Objective To investigate strain and strain rate of right ventricular(RV)based on twodimensional image by velocity vector imaging in normal subjects.Methods Thirty-two healthy adults were rolled in this study.Echocardiographic images in 4 chamber view were analyzed by conventional manual tracing for volumes and ejection fractions,which were also measured by velocity vector imaging.Myocardial velocity,strain rate,and strain were determined at the basal,mid,and apical segments of the RV free wall and ventricular septum by velocity vector imaging.Results RV ejection fractions obtained with manual tracing correlated strongly with the same indexes obtained by velocity vector imaging method in all subjects(r=0.91,P＜0.01).The strain and strain rate value of middle segment and basal segment in RV free wall were higher than those of apical segment.There were same trend in ventricular septal.The strain and strain rate of middle segment and basal segment in RV free wall were higher than those of homologous segments in ventricular septal,but the indexes
Javier Abreu-Afonso
2014-10-01
Full Text Available A study of the effect of temperature and axial strain on the parametric wavelengths produced by four-wave mixing in microstructured optical fibers is presented. Degenerate four-wave mixing was generated in the fibers by pumping at normal dispersion, near the zero-dispersion wavelength, causing the appearance of two widely-spaced four-wave mixing spectral bands. Temperature changes, and/or axial strain applied to the fiber, affects the dispersion characteristics of the fiber, which can result in the shift of the parametric wavelengths. We show that the increase of temperature causes the signal and idler wavelengths to shift linearly towards shorter and longer wavelengths, respectively. For the specific fiber of the experiment, the band shift at rates –0.04 nm/ºC and 0.3 nm/ºC, respectively. Strain causes the parametric bands to shift in the opposite way. The signal band shifted 2.8 nm/me and the idler -5.4 nm/me. Experimental observations are backed by numerical simulations.
Uppu, Santosh C; Shah, Amee; Weigand, Justin; Nielsen, James C; Ko, H Helen; Parness, Ira A; Srivastava, Shubhika
2015-06-01
The presence of myocardial late gadolinium enhancement (LGE) by cardiac magnetic resonance (CMR) imaging in concert with electrocardiography and elevated biomarkers helps support the diagnosis of acute myocarditis. Two-dimensional echocardiography is limited to global and qualitative regional function assessment and may not contribute to the diagnosis, especially in the presence of normal LV systolic function. Two-dimensional speckle-tracking (2D-STE)-derived segmental peak systolic (pkS) longitudinal strain (LS) may identify segmental myocardial involvement in myocarditis. We sought to identify an association between segmental pkS, LGE, and troponin levels in patients with myocarditis. Retrospective analysis of myocardial segmental function by 2D-STE segmental strain was compared to the presence of LGE and admission peak troponin levels in patients with acute myocarditis and preserved global LV systolic function. American Heart Association 17-segment model was used for comparison between imaging modalities. Global function was assessed by m-mode-derived shortening fraction (SF). Descriptive statistics and regression analysis were utilized. Forty-four CMRs performed to evaluate for myocarditis were identified. Of the 44, 10 patients, median age 17.5 years (14-18.5 years) and median SF 35 % (28-44 %), had paired CMR and 2D-STE data for analysis, and 161/170 segments could be analyzed by both methods for comparison. PkS LS was decreased in 51 % of segments that were positive for LGE with average pkS of -14.7 %. Segmental pkS LS abnormalities were present in all but one patient who had abnormal pkS circumferential strain. Global pkS LS was decreased in patients with myocarditis. There is a moderate correlation between decreased pkS LS and the presence of LGE by CMR, 2D-STE for myocardial involvement in acute myocarditis can serve as an useful noninvasive adjunct to the existing tests used for the diagnosis of acute myocarditis and might have a role in prognostication.
Yang, Lin; Ding, He; Zhang, Xin; Qiao, Li
2017-03-01
A semi-analytical modeling framework on the microscopic basis is proposed in this paper to predict the low-temperature transport properties of strained Nb3Sn superconductors. The theoretical predictions agree well with experimental observations, which indicate that the competitions between the strain state-dependent variations in the phonon spectrum and the electron density of states (DOS) are an important consideration in interpreting the coupled low temperature-strain sensitivity of resistivity in superconducting Nb3Sn. The model is helpful for identifying the scaling law describing the anomalies in the strain dependence of superconducting critical properties of Nb3Sn conductors.
Maximum Autocorrelation Factorial Kriging
Nielsen, Allan Aasbjerg; Conradsen, Knut; Pedersen, John L.
2000-01-01
This paper describes maximum autocorrelation factor (MAF) analysis, maximum autocorrelation factorial kriging, and its application to irregularly sampled stream sediment geochemical data from South Greenland. Kriged MAF images are compared with kriged images of varimax rotated factors from...
Wang, Haiou; Tan, Weishi; Liu, Hao; Cao, Mengxiong; Wang, Xingyu; Ma, Chunlin; Jia, Quanjie
2017-03-01
Perovskite manganite La0.5Ba0.5MnO3 (LBMO) films were deposited on (001)-oriented single-crystal SrTiO3 (STO) substrates by pulsed laser deposition. High-resolution X-ray diffraction and grazing incidence X-ray diffraction techniques were applied to characterize the crystal structure and lattice strain of LBMO films. The in-plane and out-of-plane growth orientations of LBMO films with respect to substrate surface have been studied. The epitaxial orientation relationship LBMO (001) [100] //STO (001) [100] exists at the LBMO/STO interface. The lattice strain of LBMO film begins to relax with the thickness of LBMO film up to 12 nm. When the thickness is further increased up to 43 nm, the film is in fully strain-relaxed state. Jahn-Teller strain plays an important role in LBMO/STO system. The mechanism for strain relaxation is in accordance with that of tetragonal distortion.
史海芳; 李树有; 姬永刚
2008-01-01
For two normal populations with u~nown means μi and variances σ2i>0,i=1,2,assume that there is a semi-order restriction between ratios of means and standard deviations and sample numbers of two normal populations are different.A procedure of obtaining the maximum likelihood estimatom of μi's and σ's under the semi-order restrictions is proposed.For i=3 case,some connected results and simulations are given.
Maximum margin Bayesian network classifiers.
Pernkopf, Franz; Wohlmayr, Michael; Tschiatschek, Sebastian
2012-03-01
We present a maximum margin parameter learning algorithm for Bayesian network classifiers using a conjugate gradient (CG) method for optimization. In contrast to previous approaches, we maintain the normalization constraints on the parameters of the Bayesian network during optimization, i.e., the probabilistic interpretation of the model is not lost. This enables us to handle missing features in discriminatively optimized Bayesian networks. In experiments, we compare the classification performance of maximum margin parameter learning to conditional likelihood and maximum likelihood learning approaches. Discriminative parameter learning significantly outperforms generative maximum likelihood estimation for naive Bayes and tree augmented naive Bayes structures on all considered data sets. Furthermore, maximizing the margin dominates the conditional likelihood approach in terms of classification performance in most cases. We provide results for a recently proposed maximum margin optimization approach based on convex relaxation. While the classification results are highly similar, our CG-based optimization is computationally up to orders of magnitude faster. Margin-optimized Bayesian network classifiers achieve classification performance comparable to support vector machines (SVMs) using fewer parameters. Moreover, we show that unanticipated missing feature values during classification can be easily processed by discriminatively optimized Bayesian network classifiers, a case where discriminative classifiers usually require mechanisms to complete unknown feature values in the data first.
Dobryakova, Y.V.; Dubynin, V.A.; Luijtelaar, E.L.J.M. van
2010-01-01
Lactating dams of WAG/Rij and Wistar rat strains were repeatedly placed on the "open field" arena with their pups (4-9 postnatal days). In these conditions WAG/Rij rats showed significantly poorer maternal behavior and were slower in forming pup location response. These results add to the notion of
Maximum Autocorrelation Factorial Kriging
Nielsen, Allan Aasbjerg; Conradsen, Knut; Pedersen, John L.; Steenfelt, Agnete
2000-01-01
This paper describes maximum autocorrelation factor (MAF) analysis, maximum autocorrelation factorial kriging, and its application to irregularly sampled stream sediment geochemical data from South Greenland. Kriged MAF images are compared with kriged images of varimax rotated factors from an ordinary non-spatial factor analysis, and they are interpreted in a geological context. It is demonstrated that MAF analysis contrary to ordinary non-spatial factor analysis gives an objective discrimina...
Mbuthia, P G; Njagi, L W; Nyaga, P N; Bebora, L C; Minga, U; Christensen, J P; Olsen, J E
2011-12-01
Twelve-week-old indigenous chickens, either immune-suppressed using dexamethasone (IS) or non-immune-suppressed (NIS), were challenged with a low virulent strain, Pasteurella multocida strain NCTC 10322(T), and developed clinical signs and pathological lesions typical of chronic fowl cholera. NIS birds demonstrated much more severe signs of fowl cholera than IS birds. With few exceptions, signs recorded in IS and NIS birds were of the same types, but significantly milder in the IS birds, indicating that immune suppression does not change the course of infection but rather the severity of signs in fowl cholera. P. multocida signals by fluorescent in situ hybridization (FISH) were observed between 1 h and 14 days in the lungs, trachea, air sacs, liver, spleen, bursa of Fabricius and caecal tonsils, while signals from other organs mostly were observed after 24 h. More organs had FISH signals in NIS birds than in IS birds and at higher frequency per organ. Many organs were positive by FISH even 14 days post infection, and it is suggested that these organs may be likely places for long-term carriage of P. multocida following infection. The present study has demonstrated the spread of P. multocida in different tissues in chickens and distribution of lesions associated with chronic fowl cholera, and pointed to a decrease of pathology in IS birds. Since dexamethasone mostly affects heterophils, the study suggests that these cells play a role in the development of lesions associated with chronic fowl cholera in chickens.
Seno, E T; Baltz, R H
1981-01-01
An efficient assay for S-adenosyl-L-methionine:macrocin O-methyltransferase, the enzyme which carries out the terminal step in tylosin biosynthesis, is described. Macrocin O-methyltransferase requires Mg2+ and S-adenosyl-L-methionine for activity, has a temperature optimum of about 31 degrees C, and has a pH optimum of 7.5 to 8.2. Macrocin O-methyltransferase specifically converts macrocin to tylosin by O-methylation of the 3" ' position of macrocin. In vitro methylation studies with extracts from a tylosin-producing Streptomyces fradiae strain and from mutant strains blocked in 2" '- or 3" '-O-methylations indicated that: (i) the 2" '- and 3" '-O-methylations occur after 6-deoxy-D-allose is attached to the macrolide ring; (ii) the 2" '- and 3" '-O-methylations are carried out by separate enzymes; and (iii) the 2" '-O-methylation precedes the 3" '-O-methylation. Macrocin O-methyltransferase was inhibited by high levels of its substrate, macrocin, by its product, tylosin, and by other tylosin analogs which contained mycinose or demethyl analogs of mycinose. Macrocin O-methyltransferase was produced early in the tylosin fermentation cycle by S. fradiae and preceded the onset of rapid tylosin biosynthesis by about 24 h. The enzyme specific activity reached maximum at about 72 h and then slowly declined. A mutant strain of S. fradiae selected for increased tylosin production synthesized macrocin O-methyltransferase more rapidly and accumulated a higher enzyme specific activity than a wild-type strain. PMID:7305323
Maximum-biomass prediction of homofermentative Lactobacillus.
Cui, Shumao; Zhao, Jianxin; Liu, Xiaoming; Chen, Yong Q; Zhang, Hao; Chen, Wei
2016-07-01
Fed-batch and pH-controlled cultures have been widely used for industrial production of probiotics. The aim of this study was to systematically investigate the relationship between the maximum biomass of different homofermentative Lactobacillus and lactate accumulation, and to develop a prediction equation for the maximum biomass concentration in such cultures. The accumulation of the end products and the depletion of nutrients by various strains were evaluated. In addition, the minimum inhibitory concentrations (MICs) of acid anions for various strains at pH 7.0 were examined. The lactate concentration at the point of complete inhibition was not significantly different from the MIC of lactate for all of the strains, although the inhibition mechanism of lactate and acetate on Lactobacillus rhamnosus was different from the other strains which were inhibited by the osmotic pressure caused by acid anions at pH 7.0. When the lactate concentration accumulated to the MIC, the strains stopped growing. The maximum biomass was closely related to the biomass yield per unit of lactate produced (YX/P) and the MIC (C) of lactate for different homofermentative Lactobacillus. Based on the experimental data obtained using different homofermentative Lactobacillus, a prediction equation was established as follows: Xmax - X0 = (0.59 ± 0.02)·YX/P·C.
Hamilton, James D.; Daniel F. Waggoner; Zha, Tao
2004-01-01
The issue of normalization arises whenever two different values for a vector of unknown parameters imply the identical economic model. A normalization does not just imply a rule for selecting which point, among equivalent ones, to call the maximum likelihood estimator (MLE). It also governs the topography of the set of points that go into a small-sample confidence interval associated with that MLE. A poor normalization can lead to multimodal distributions, disjoint confidence intervals, and v...
Maximum likely scale estimation
Loog, Marco; Pedersen, Kim Steenstrup; Markussen, Bo
2005-01-01
A maximum likelihood local scale estimation principle is presented. An actual implementation of the estimation principle uses second order moments of multiple measurements at a fixed location in the image. These measurements consist of Gaussian derivatives possibly taken at several scales and/or ...
Maximum information photoelectron metrology
Hockett, P; Wollenhaupt, M; Baumert, T
2015-01-01
Photoelectron interferograms, manifested in photoelectron angular distributions (PADs), are a high-information, coherent observable. In order to obtain the maximum information from angle-resolved photoionization experiments it is desirable to record the full, 3D, photoelectron momentum distribution. Here we apply tomographic reconstruction techniques to obtain such 3D distributions from multiphoton ionization of potassium atoms, and fully analyse the energy and angular content of the 3D data. The PADs obtained as a function of energy indicate good agreement with previous 2D data and detailed analysis [Hockett et. al., Phys. Rev. Lett. 112, 223001 (2014)] over the main spectral features, but also indicate unexpected symmetry-breaking in certain regions of momentum space, thus revealing additional continuum interferences which cannot otherwise be observed. These observations reflect the presence of additional ionization pathways and, most generally, illustrate the power of maximum information measurements of th...
Maximum Likelihood Associative Memories
Gripon, Vincent; Rabbat, Michael
2013-01-01
Associative memories are structures that store data in such a way that it can later be retrieved given only a part of its content -- a sort-of error/erasure-resilience property. They are used in applications ranging from caches and memory management in CPUs to database engines. In this work we study associative memories built on the maximum likelihood principle. We derive minimum residual error rates when the data stored comes from a uniform binary source. Second, we determine the minimum amo...
Maximum likely scale estimation
Loog, Marco; Pedersen, Kim Steenstrup; Markussen, Bo
2005-01-01
A maximum likelihood local scale estimation principle is presented. An actual implementation of the estimation principle uses second order moments of multiple measurements at a fixed location in the image. These measurements consist of Gaussian derivatives possibly taken at several scales and....../or having different derivative orders. Although the principle is applicable to a wide variety of image models, the main focus here is on the Brownian model and its use for scale selection in natural images. Furthermore, in the examples provided, the simplifying assumption is made that the behavior...... of the measurements is completely characterized by all moments up to second order....
Holch, Anne; Gottlieb, Caroline Trebbien; Larsen, Marianne Halberg
2010-01-01
L. monocytogenes strains, including clinical strains, and they carry a premature stop codon in inlA. Eight of 15 strains, including the RAPD 9 and maternofetal strains, had a 105-nucleotide deletion in actA that did not affect cell-to-cell spread in mouse fibroblasts. The RAPD 9 strains may still...
龙城和迪法克鹌鹑血清尿酸生理值范围探讨%Normal range of serum uric acid in quails of different strains and genders
王雨; 林志健; 张冰; 聂安政; 周月; 朱春胜; 牛红娟; 王雪洁
2015-01-01
Objective To explore the normal range of serum uric acid in quails.Method The data were collect-ed from male and female quails of different strains in 11 experiments, and analyzed by the way of medical reference value. Result The mean value of serum uric acid of male Difake strain quails was (221.06 ±79.59)μmol/L,and the normal range was (87.32 to 382.34)μmol/L.The mean value of serum uric acid of female Difake strain quails was (189.85 ± 68.58)μmol/L, and the normal range was ( 72.72 to 369.73 )μmol/L.The mean value of serum uric acid of male Longcheng strain quails was (217.22 ±72.91)μmol/L,and the normal range was (82.92 to 360.24)μmol/L.The mean value of serum uric acid of female Longcheng strain quails was ( 197.27 ±66.84 )μmol/L, and the normal range was (95.36 to 348.73)μmol/L.The serum uric acid value of female quails was significantly lower than that of male quails. There was no significant difference in the value of serum uric acid between female and male quails from each day-age groups.Conclusions This study has established the normal ranges for serum uric acid in quails of different strains and genders.%目的：探讨不同品系、性别鹌鹑血清尿酸值生理值范围。方法收集本实验室前期11批不同品系、性别鹌鹑的血清尿酸值，动态观察其血清尿酸的含量变化，利用医学参考值的方法对收集到数据进行统计分析。结果雄性迪法克鹌鹑血清尿酸的平均值为（221．06±79．59）μmol／L，血清尿酸水平参考值范围为（87．32～382．34）μmol／L；雌性迪法克鹌鹑血清尿酸的平均值为（189．85±68．58）μmol／L，血清尿酸水平参考值范围为（72．72～369．73）μmol／L；雄性龙城鹌鹑血清尿酸的平均值为（217．22±72．91）μmol／L，血清尿酸水平参考值范围为（82．92～360．24）μmol／L，雌性龙城鹌鹑血清尿酸的平均值为（197．27±66．84）μmol／L，血清尿
F. TopsÃƒÂ¸e
2001-09-01
Full Text Available Abstract: In its modern formulation, the Maximum Entropy Principle was promoted by E.T. Jaynes, starting in the mid-fifties. The principle dictates that one should look for a distribution, consistent with available information, which maximizes the entropy. However, this principle focuses only on distributions and it appears advantageous to bring information theoretical thinking more prominently into play by also focusing on the "observer" and on coding. This view was brought forward by the second named author in the late seventies and is the view we will follow-up on here. It leads to the consideration of a certain game, the Code Length Game and, via standard game theoretical thinking, to a principle of Game Theoretical Equilibrium. This principle is more basic than the Maximum Entropy Principle in the sense that the search for one type of optimal strategies in the Code Length Game translates directly into the search for distributions with maximum entropy. In the present paper we offer a self-contained and comprehensive treatment of fundamentals of both principles mentioned, based on a study of the Code Length Game. Though new concepts and results are presented, the reading should be instructional and accessible to a rather wide audience, at least if certain mathematical details are left aside at a rst reading. The most frequently studied instance of entropy maximization pertains to the Mean Energy Model which involves a moment constraint related to a given function, here taken to represent "energy". This type of application is very well known from the literature with hundreds of applications pertaining to several different elds and will also here serve as important illustration of the theory. But our approach reaches further, especially regarding the study of continuity properties of the entropy function, and this leads to new results which allow a discussion of models with so-called entropy loss. These results have tempted us to speculate over
Regularized maximum correntropy machine
Wang, Jim Jing-Yan
2015-02-12
In this paper we investigate the usage of regularized correntropy framework for learning of classifiers from noisy labels. The class label predictors learned by minimizing transitional loss functions are sensitive to the noisy and outlying labels of training samples, because the transitional loss functions are equally applied to all the samples. To solve this problem, we propose to learn the class label predictors by maximizing the correntropy between the predicted labels and the true labels of the training samples, under the regularized Maximum Correntropy Criteria (MCC) framework. Moreover, we regularize the predictor parameter to control the complexity of the predictor. The learning problem is formulated by an objective function considering the parameter regularization and MCC simultaneously. By optimizing the objective function alternately, we develop a novel predictor learning algorithm. The experiments on two challenging pattern classification tasks show that it significantly outperforms the machines with transitional loss functions.
Maximum Performance Tests in Children with Developmental Spastic Dysarthria.
Wit, J.; And Others
1993-01-01
Three Maximum Performance Tasks (Maximum Sound Prolongation, Fundamental Frequency Range, and Maximum Repetition Rate) were administered to 11 children (ages 6-11) with spastic dysarthria resulting from cerebral palsy and 11 controls. Despite intrasubject and intersubject variability in normal and pathological speakers, the tasks were found to be…
Equalized near maximum likelihood detector
2012-01-01
This paper presents new detector that is used to mitigate intersymbol interference introduced by bandlimited channels. This detector is named equalized near maximum likelihood detector which combines nonlinear equalizer and near maximum likelihood detector. Simulation results show that the performance of equalized near maximum likelihood detector is better than the performance of nonlinear equalizer but worse than near maximum likelihood detector.
Cheeseman, Peter; Stutz, John
2005-01-01
A long standing mystery in using Maximum Entropy (MaxEnt) is how to deal with constraints whose values are uncertain. This situation arises when constraint values are estimated from data, because of finite sample sizes. One approach to this problem, advocated by E.T. Jaynes [1], is to ignore this uncertainty, and treat the empirically observed values as exact. We refer to this as the classic MaxEnt approach. Classic MaxEnt gives point probabilities (subject to the given constraints), rather than probability densities. We develop an alternative approach that assumes that the uncertain constraint values are represented by a probability density {e.g: a Gaussian), and this uncertainty yields a MaxEnt posterior probability density. That is, the classic MaxEnt point probabilities are regarded as a multidimensional function of the given constraint values, and uncertainty on these values is transmitted through the MaxEnt function to give uncertainty over the MaXEnt probabilities. We illustrate this approach by explicitly calculating the generalized MaxEnt density for a simple but common case, then show how this can be extended numerically to the general case. This paper expands the generalized MaxEnt concept introduced in a previous paper [3].
Carpenter, Donald A.
2008-01-01
Confusion exists among database textbooks as to the goal of normalization as well as to which normal form a designer should aspire. This article discusses such discrepancies with the intention of simplifying normalization for both teacher and student. This author's industry and classroom experiences indicate such simplification yields quicker…
Development of epoxy-novolac base adhesive for normal temperature strain gauge%一种常温应变计用环氧-酚醛基底胶的研制
史煜; 姚程炜; 李琦
2009-01-01
以E-12环氧树脂、酚醛树脂、聚乙烯醇缩甲醛和双氰胺为原料制成了一种常温应变计用基底胶.通过对K值分散、蠕变和机械滞后等指标的测试研究了原料用量、基底胶合成温度等对应变计工作特性的影响,确定了基底胶的最佳配方及工艺:E-12环氧树脂40份;酚醛树脂20份;聚乙烯醇缩甲醛1份;双氰胺2份,合成温度130 ℃.结果表明,该基底胶平均剥离强度为2.7 N/cm,5 ℃下储存期为3个月,用该基底胶制成的应变计的工作特性满足国标要求.%A base adhesive for normal temperature strain gauge was prepared from epoxy resin E-12,novolac resin,polyvinyl formal and dicyandiamide.The effect of raw material amount and synthesis temperature on the work characteristics was investigated by the tests of K value decentralization, creep and mechanical hystersis.The optimum formula and process were determined as follows: epoxy resin E-12 40,novolac resin 20,polyvinyl formal 1, dicyandiamide 2 and synthesis temperature 130 ℃. The results showed that the average peeling strength of the adhesive was 2.7 N/cm and the storage life was three months at 5 ℃.The characteristics of the strain gauge made of the epoxy -novolac base adhesive met the requirement of national standard.
SEXUAL DIMORPHISM OF MAXIMUM FEMORAL LENGTH
Pandya A M
2011-04-01
Full Text Available Sexual identification from the skeletal parts has medico legal and anthropological importance. Present study aims to obtain values of maximum femoral length and to evaluate its possible usefulness in determining correct sexual identification. Study sample consisted of 184 dry, normal, adult, human femora (136 male & 48 female from skeletal collections of Anatomy department, M. P. Shah Medical College, Jamnagar, Gujarat. Maximum length of femur was considered as maximum vertical distance between upper end of head of femur and the lowest point on femoral condyle, measured with the osteometric board. Mean Values obtained were, 451.81 and 417.48 for right male and female, and 453.35 and 420.44 for left male and female respectively. Higher value in male was statistically highly significant (P< 0.001 on both sides. Demarking point (D.P. analysis of the data showed that right femora with maximum length more than 476.70 were definitely male and less than 379.99 were definitely female; while for left bones, femora with maximum length more than 484.49 were definitely male and less than 385.73 were definitely female. Maximum length identified 13.43% of right male femora, 4.35% of right female femora, 7.25% of left male femora and 8% of left female femora. [National J of Med Res 2011; 1(2.000: 67-70
Scheffold Thomas
2010-07-01
Full Text Available Abstract Background Increased muscle mass index of the left ventricle (LVMi is an independent predictor for the development of symptoms in patients with asymptomatic aortic stenosis (AS. While the onset of clinical symptoms and left ventricular systolic dysfunction determines a poor prognosis, the standard echocardiographic evaluation of LV dysfunction, only based on measurements of the LV ejection fraction (EF, may be insufficient for an early assessment of imminent heart failure. Contrary, 2-dimensional speckle tracking (2DS seems to be superior in detecting subtle changes in myocardial function. The aim of the study was to assess these LV function deteriorations with global longitudinal strain (GLS analysis and the relations to LVMi in patients with AS and normal EF. Methods 50 patients with moderate to severe AS and 31 controls were enrolled. All patients underwent echocardiography, including 2DS imaging. LVMi measures were performed with magnetic resonance imaging in 38 patients with AS and indexed for body surface area. Results The total group of patients with AST showed a GLS of -15,2 ± 3,6% while the control group reached -19,5 ± 2,7% (p Conclusions In conclusion, increased LVMi is reflected in abnormalities of GLS and the proportion of GLS impairment depends on the extent of LV hypertrophy. Therefore, simultaneous measurement of LVMi and GLS might be useful to identify patients at high risk for transition into heart failure who would benefit from aortic valve replacement irrespectively of LV EF.
A novel limiting strain energy strength theory
LIU Guang-lian
2009-01-01
With applied dislocation theory,the effects of shear and normal stresses on the slide and climb motions at the same section of a crystal were analyzed.And,based on the synergetic effect of both normal and shear strain specific energies,the concept of the total equivalent strain specific energy (TESSE) at an oblique section and a new strength theory named as limiting strain energy strength theory (LSEST) were proposed.As for isotropic materials,the plastic yielding or brittle fracture of under uniaxial stress state would occur when the maximum TESSE reached the strain specific energy,also the expressions on the equivalent stresses and a function of failure of the LSEST under different principal stress states were obtained.Relationship formulas among the tensile,compressive and shear yield strengths for plastic metals were derived.These theoretical predictions,according to the LSEST,were consistent very well with experiment results of tensile,compressive and torsion tests of three plastic metals and other experiment results from open literatures.This novel LSEST might also help for strength calculation of other materials.
Modelling to very high strains
Bons, P. D.; Jessell, M. W.; Griera, A.; Evans, L. A.; Wilson, C. J. L.
2009-04-01
Ductile strains in shear zones often reach extreme values, resulting in typical structures, such as winged porphyroclasts and several types of shear bands. The numerical simulation of the development of such structures has so far been inhibited by the low maximum strains that numerical models can normally achieve. Typical numerical models collapse at shear strains in the order of one to three. We have implemented a number of new functionalities in the numerical platform "Elle" (Jessell et al. 2001), which significantly increases the amount of strain that can be achieved and simultaneously reduces boundary effects that become increasingly disturbing at higher strain. Constant remeshing, while maintaining the polygonal phase regions, is the first step to avoid collapse of the finite-element grid required by finite-element solvers, such as Basil (Houseman et al. 2008). The second step is to apply a grain-growth routine to the boundaries of polygons that represent phase regions. This way, the development of sharp angles is avoided. A second advantage is that phase regions may merge or become separated (boudinage). Such topological changes are normally not possible in finite element deformation codes. The third step is the use of wrapping vertical model boundaries, with which optimal and unchanging model boundaries are maintained for the application of stress or velocity boundary conditions. The fourth step is to shift the model by a random amount in the vertical direction every time step. This way, the fixed horizontal boundary conditions are applied to different material points within the model every time step. Disturbing boundary effects are thus averaged out over the whole model and not localised to e.g. top and bottom of the model. Reduction of boundary effects has the additional advantage that model can be smaller and, therefore, numerically more efficient. Owing to the combination of these existing and new functionalities it is now possible to simulate the
Broer, H.; Hoveijn, I.; Lunter, G.; Vegter, G.
2003-01-01
The Birkhoff normal form procedure is a widely used tool for approximating a Hamiltonian systems by a simpler one. This chapter starts out with an introduction to Hamiltonian mechanics, followed by an explanation of the Birkhoff normal form procedure. Finally we discuss several algorithms for comput
Zhao, Jingbo; Liao, Donghua; Yang, Jian; Gregersen, Hans
2011-07-28
Previous studies have demonstrated morphological and biomechanical remodeling in the intestine proximal to an obstruction. The present study aimed to obtain stress and strain thresholds to initiate contraction and the maximal contraction stress and strain in partially obstructed guinea pig jejunal segments. Partial obstruction and sham operations were surgically created in mid-jejunum of male guinea pigs. The animals survived 2, 4, 7 and 14 days. Animals not being operated on served as normal controls. The segments were used for no-load state, zero-stress state and distension analyses. The segment was inflated to 10 cmH(2)O pressure in an organ bath containing 37°C Krebs solution and the outer diameter change was monitored. The stress and strain at the contraction threshold and at maximum contraction were computed from the diameter, pressure and the zero-stress state data. Young's modulus was determined at the contraction threshold. The muscle layer thickness in obstructed intestinal segments increased up to 300%. Compared with sham-obstructed and normal groups, the contraction stress threshold, the maximum contraction stress and the Young's modulus at the contraction threshold increased whereas the strain threshold and maximum contraction strain decreased after 7 days obstruction (P<0.05 and 0.01). In conclusion, in the partially obstructed intestinal segments, a larger distension force was needed to evoke contraction likely due to tissue remodeling. Higher contraction stresses were produced and the contraction deformation (strain) became smaller. Copyright © 2011 Elsevier Ltd. All rights reserved.
49 CFR 195.406 - Maximum operating pressure.
2010-10-01
... 49 Transportation 3 2010-10-01 2010-10-01 false Maximum operating pressure. 195.406 Section 195... HAZARDOUS LIQUIDS BY PIPELINE Operation and Maintenance § 195.406 Maximum operating pressure. (a) Except for surge pressures and other variations from normal operations, no operator may operate a pipeline at a...
OECD Maximum Residue Limit Calculator
With the goal of harmonizing the calculation of maximum residue limits (MRLs) across the Organisation for Economic Cooperation and Development, the OECD has developed an MRL Calculator. View the calculator.
吴志荣; 胡绪腾; 宋迎东
2013-01-01
工程中的大多构件承受着复杂的载荷形式,将单轴疲劳模型应用到多轴载荷情况已不能满足工程精度的要求,多轴载荷下的疲劳寿命计算日益引起人们的重视.基于临界平面的思想,结合Fatemi-Socie(FS)模型和Smith-Watson-Topper(SWT)参数各自的优点,提出一种新的多轴疲劳寿命预测模型.该模型以最大切应变幅与最大切应变幅平面上修正SWT参数的和作为多轴疲劳损伤控制参量,此参量可以同时考虑非比例附加循环硬化和平均应力对材料多轴疲劳寿命的影响,能同时适用于比例和非比例加载下的多轴疲劳问题.采用纯钛Ti、BT9钛合金、304不锈钢、S45C钢和1045HR钢5种材料多轴疲劳试验数据对提出的模型进行评估和验证,对几种材料比例和非比例加载下的多轴疲劳寿命预测结果大都分布在试验结果的2倍分散带之内,结果表明提出的多轴疲劳寿命模型具有较高的预测精度.%The most components of engineering structures are usually subjected to a complex loading. It is unable to meet the requirements of engineering precision if a uniaxial fatigue model is used under multi-axial loading. The calculation of fatigue life prediction under multiaxial loading causes people's attention more and more. A new multiaxial fatigue life prediction model is proposed based on the critical plane criteria. The model integrates the respective advantages of Fatemi-Socie(FS) model and Smith-Watson-Topper(SWT) parameter. The damage parameter in this model takes the sum of the maximum shear strain amplitude and the modified SWT parameter on the maximum shear strain amplitude plain. It can consider the effects of additional cyclic hardening due to non-proportional loading and mean stress on the multi-axial fatigue life of material. The proposed model can be applied to proportional and non-proportional loading. The model is evaluated by the multiaxial fatigue test data of pure titanium, BT9
Maximum Entropy in Drug Discovery
Chih-Yuan Tseng
2014-07-01
Full Text Available Drug discovery applies multidisciplinary approaches either experimentally, computationally or both ways to identify lead compounds to treat various diseases. While conventional approaches have yielded many US Food and Drug Administration (FDA-approved drugs, researchers continue investigating and designing better approaches to increase the success rate in the discovery process. In this article, we provide an overview of the current strategies and point out where and how the method of maximum entropy has been introduced in this area. The maximum entropy principle has its root in thermodynamics, yet since Jaynes’ pioneering work in the 1950s, the maximum entropy principle has not only been used as a physics law, but also as a reasoning tool that allows us to process information in hand with the least bias. Its applicability in various disciplines has been abundantly demonstrated. We give several examples of applications of maximum entropy in different stages of drug discovery. Finally, we discuss a promising new direction in drug discovery that is likely to hinge on the ways of utilizing maximum entropy.
Incorporation of Mean/Maximum Stress Effects in the Multiaxial Racetrack Filter
Marco Antonio Meggiolaro
2016-10-01
Full Text Available This work extends the Multiaxial Racetrack Filter (MRF to incorporate mean or maximum stress effects, adopting a filter amplitude that depends on the current stress level along the stress or strain path. In this way, a small stress or strain amplitude event can be filtered out if associated with a non-damaging low mean or peak stress level, while another event with the very same amplitude can be preserved if happening under a more damaging high mean or peak stress level. The variable value of the filter amplitude must be calculated in real time, thus it cannot depend on the peak or mean stresses along a load event, because it would require cycle identification and as so information about future events. Instead, mean/maximum stress effects are modeled in the filter as a function of the current (instantaneous hydrostatic or normal stress along the multiaxial load path, respectively for invariantbased and critical-plane models. The MRF efficiency is evaluated from tension-torsion experiments in 316L stainless steel tubular specimens under non-proportional (NP load paths, showing it can robustly filter out nondamaging events even under multiaxial NP variable amplitude loading histories
Selbekk, Tormod; Brekken, Reidar; Solheim, Ole; Lydersen, Stian; Hernes, Toril A N; Unsgaard, Geirmund
2010-01-01
The objective of the study was to investigate tissue motion and strain imposed by cardiovascular pulsation in pathologic and normal brain parenchyma, as quantified from in vivo ultrasound data. Ultrasound acquired during surgery of 16 patients with glial tumors was retrospectively processed and analyzed. The tissue velocity was quantified at depths of 1cm, 2cm and 3cm from brain cortex to investigate spatial dependency with depth. Comparison of strain and velocity in tumor and adjacent normal parenchyma was performed by selecting two regions-of-interest in the hyperechoic tumor and two regions in the low-echogenic areas interpreted as mainly normal tissue with some degree of tumor cell infiltration. The absolute maximum tissue velocity is seen to increase with increasing depths in 14 of 16 cases (87.5%). The maximum tissue velocities in the four regions close to the ultrasound visible tumor border are not statistically different (p=0.163 to p=0.975). The strain magnitudes are significantly higher in the regions with expected normal brain parenchyma than in regions with expected glial tumor tissue, both for the two regions being closest to the tumor border (p=0.0004) and for the two regions further away from the tumor border (p=0.0009). We conclude that the velocity of the brain parenchyma imposed by arterial pulsation during a cardiac cycle is generally increasing with increasing depth from cortex. The maximum velocity appears to be similar in regions with expected normal brain and tumor tissue, thus, does not seem to be affected by pathology. Strain magnitude is, however, a suitable parameter for discrimination of glial tumor and normal brain parenchyma. (E-mail: Tormod.Selbekk@sintef.no).
Wang, Haiou [Hangzhou Dianzi University, Institute of Materials Physics, Hangzhou (China); Tan, Weishi [Hunan City University, College of Communication and Electronic Engineering, Yiyang (China); Nanjing University of Science and Technology, Key Laboratory of Soft Chemistry and Functional Materials, Department of Applied Physics, Ministry of Education, Nanjing (China); Liu, Hao [Suzhou Institute of Industrial Technology, Department of Electronic and Communication Engineering, Suzhou (China); Cao, Mengxiong; Wang, Xingyu; Ma, Chunlin [Nanjing University of Science and Technology, Key Laboratory of Soft Chemistry and Functional Materials, Department of Applied Physics, Ministry of Education, Nanjing (China); Jia, Quanjie [The Chinese Academy of Sciences, Institute of High Energy Physics, Beijing (China)
2017-03-15
Perovskite manganite La{sub 0.5}Ba{sub 0.5}MnO{sub 3} (LBMO) films were deposited on (001)-oriented single-crystal SrTiO{sub 3} (STO) substrates by pulsed laser deposition. High-resolution X-ray diffraction and grazing incidence X-ray diffraction techniques were applied to characterize the crystal structure and lattice strain of LBMO films. The in-plane and out-of-plane growth orientations of LBMO films with respect to substrate surface have been studied. The epitaxial orientation relationship LBMO (001) [100] //STO (001) [100] exists at the LBMO/STO interface. The lattice strain of LBMO film begins to relax with the thickness of LBMO film up to 12 nm. When the thickness is further increased up to 43 nm, the film is in fully strain-relaxed state. Jahn-Teller strain plays an important role in LBMO/STO system. The mechanism for strain relaxation is in accordance with that of tetragonal distortion. (orig.)
Greenslade, Thomas B., Jr.
1985-01-01
Discusses a series of experiments performed by Thomas Hope in 1805 which show the temperature at which water has its maximum density. Early data cast into a modern form as well as guidelines and recent data collected from the author provide background for duplicating Hope's experiments in the classroom. (JN)
Abolishing the maximum tension principle
Dabrowski, Mariusz P
2015-01-01
We find the series of example theories for which the relativistic limit of maximum tension $F_{max} = c^2/4G$ represented by the entropic force can be abolished. Among them the varying constants theories, some generalized entropy models applied both for cosmological and black hole horizons as well as some generalized uncertainty principle models.
Abolishing the maximum tension principle
Mariusz P. Da̧browski
2015-09-01
Full Text Available We find the series of example theories for which the relativistic limit of maximum tension Fmax=c4/4G represented by the entropic force can be abolished. Among them the varying constants theories, some generalized entropy models applied both for cosmological and black hole horizons as well as some generalized uncertainty principle models.
Partitioning of Seismogenic Strain in the Offshore Costa Rica Forearc
Lewis, J. C.; Bilek, S.
2002-12-01
We examine non-recoverable strain in the offshore forearc crust between the Osa and Nicoya Peninsulas of Costa Rica. Treating the crust as a micropolar continuum we use new and published earthquake focal mechanisms to invert for best-fitting partial strain-rate tensors. Our preliminary results for new focal mechanisms west northwest of the Osa Peninsula indicate a shallow northwest-plunging maximum stretching axis and a subvertical minimum stretching axis. This strain geometry suggests thinning of the forearc and extension nearly parallel to the Middle America Trench. The earthquakes used to constrain this deformation geometry occurred at depths less than 5.1 kilometers in hanging wall crust adjacent to substantial topographic relief on the downgoing Cocos plate. To date evidence for trench-parallel stretching has only come from observations of brittle faults in coastal and inland exposures in Miocene sediments and Quaternary fluvial deposits. Our inversions of existing data from southeast of the Nicoya Peninsula yield results that are in accord with previous findings. Here, events ranging in depth between about 12 and 31 kilometers indicate nearly trench-normal shortening and crustal thickening. Earthquakes at similar depths just west northwest of the Osa Peninsula, however, reveal subhorizontal maximum and minimum stretching axes with the former trending south. This strain geometry is consistent with strike slip faulting and suggests partitioning of seismogenic strain with depth in the forearc offshore Osa Peninsula. In total, our findings suggest variations in the 3-dimensional pattern of non-recoverable strain in the Costa Rica forearc. A quantitative description of this sort of variation is necessary in order to better understand geodetic observations, and ultimately, the relation between coupling across the seismogenic zone and forearc strain.
Maximum Genus of Strong Embeddings
Er-ling Wei; Yan-pei Liu; Han Ren
2003-01-01
The strong embedding conjecture states that any 2-connected graph has a strong embedding on some surface. It implies the circuit double cover conjecture: Any 2-connected graph has a circuit double cover.Conversely, it is not true. But for a 3-regular graph, the two conjectures are equivalent. In this paper, a characterization of graphs having a strong embedding with exactly 3 faces, which is the strong embedding of maximum genus, is given. In addition, some graphs with the property are provided. More generally, an upper bound of the maximum genus of strong embeddings of a graph is presented too. Lastly, it is shown that the interpolation theorem is true to planar Halin graph.
Remizov, Ivan D
2009-01-01
In this note, we represent a subdifferential of a maximum functional defined on the space of all real-valued continuous functions on a given metric compact set. For a given argument, $f$ it coincides with the set of all probability measures on the set of points maximizing $f$ on the initial compact set. This complete characterization lies in the heart of several important identities in microeconomics, such as Roy's identity, Sheppard's lemma, as well as duality theory in production and linear programming.
Prediction of three dimensional maximum isometric neck strength.
Fice, Jason B; Siegmund, Gunter P; Blouin, Jean-Sébastien
2014-09-01
We measured maximum isometric neck strength under combinations of flexion/extension, lateral bending and axial rotation to determine whether neck strength in three dimensions (3D) can be predicted from principal axes strength. This would allow biomechanical modelers to validate their neck models across many directions using only principal axis strength data. Maximum isometric neck moments were measured in 9 male volunteers (29±9 years) for 17 directions. The 3D moments were normalized by the principal axis moments, and compared to unity for all directions tested. Finally, each subject's maximum principal axis moments were used to predict their resultant moment in the off-axis directions. Maximum moments were 30±6 N m in flexion, 32±9 N m in lateral bending, 51±11 N m in extension, and 13±5 N m in axial rotation. The normalized 3D moments were not significantly different from unity (95% confidence interval contained one), except for three directions that combined ipsilateral axial rotation and lateral bending; in these directions the normalized moments exceeded one. Predicted resultant moments compared well to the actual measured values (r2=0.88). Despite exceeding unity, the normalized moments were consistent across subjects to allow prediction of maximum 3D neck strength using principal axes neck strength.
The Testability of Maximum Magnitude
Clements, R.; Schorlemmer, D.; Gonzalez, A.; Zoeller, G.; Schneider, M.
2012-12-01
Recent disasters caused by earthquakes of unexpectedly large magnitude (such as Tohoku) illustrate the need for reliable assessments of the seismic hazard. Estimates of the maximum possible magnitude M at a given fault or in a particular zone are essential parameters in probabilistic seismic hazard assessment (PSHA), but their accuracy remains untested. In this study, we discuss the testability of long-term and short-term M estimates and the limitations that arise from testing such rare events. Of considerable importance is whether or not those limitations imply a lack of testability of a useful maximum magnitude estimate, and whether this should have any influence on current PSHA methodology. We use a simple extreme value theory approach to derive a probability distribution for the expected maximum magnitude in a future time interval, and we perform a sensitivity analysis on this distribution to determine if there is a reasonable avenue available for testing M estimates as they are commonly reported today: devoid of an appropriate probability distribution of their own and estimated only for infinite time (or relatively large untestable periods). Our results imply that any attempt at testing such estimates is futile, and that the distribution is highly sensitive to M estimates only under certain optimal conditions that are rarely observed in practice. In the future we suggest that PSHA modelers be brutally honest about the uncertainty of M estimates, or must find a way to decrease its influence on the estimated hazard.
Alternative Multiview Maximum Entropy Discrimination.
Chao, Guoqing; Sun, Shiliang
2016-07-01
Maximum entropy discrimination (MED) is a general framework for discriminative estimation based on maximum entropy and maximum margin principles, and can produce hard-margin support vector machines under some assumptions. Recently, the multiview version of MED multiview MED (MVMED) was proposed. In this paper, we try to explore a more natural MVMED framework by assuming two separate distributions p1( Θ1) over the first-view classifier parameter Θ1 and p2( Θ2) over the second-view classifier parameter Θ2 . We name the new MVMED framework as alternative MVMED (AMVMED), which enforces the posteriors of two view margins to be equal. The proposed AMVMED is more flexible than the existing MVMED, because compared with MVMED, which optimizes one relative entropy, AMVMED assigns one relative entropy term to each of the two views, thus incorporating a tradeoff between the two views. We give the detailed solving procedure, which can be divided into two steps. The first step is solving our optimization problem without considering the equal margin posteriors from two views, and then, in the second step, we consider the equal posteriors. Experimental results on multiple real-world data sets verify the effectiveness of the AMVMED, and comparisons with MVMED are also reported.
Mbuthia, P.G.; Njagi, L.W.; Nyaga, P.N.;
2011-01-01
Twelve-week-old indigenous chickens, either immune-suppressed using dexamethasone (IS) or non-immune-suppressed (NIS), were challenged with a low virulent strain, Pasteurella multocida strain NCTC 10322(T), and developed clinical signs and pathological lesions typical of chronic fowl cholera. NIS...... birds demonstrated much more severe signs of fowl cholera than IS birds. With few exceptions, signs recorded in IS and NIS birds were of the same types, but significantly milder in the IS birds, indicating that immune suppression does not change the course of infection but rather the severity of signs...... in fowl cholera. P. multocida signals by fluorescent in situ hybridization (FISH) were observed between 1 h and 14 days in the lungs, trachea, air sacs, liver, spleen, bursa of Fabricius and caecal tonsils, while signals from other organs mostly were observed after 24 h. More organs had FISH signals...
Jensen, Magnus Thorsten; Risum, Niels; Rossing, Peter
2016-01-01
AIMS: Identification of early signs and symptoms of heart disease is important in type 1 diabetes (T1DM). Global longitudinal strain (GLS) by speckle-tracking echocardiography can detect subtle impairments in myocardial function. We investigated the association between myocardial function......-IV. LVEF did not differ between groups of dyspnea in neither univariable nor multivariable models (p>0.1). E/e' was associated with degree of dyspnea in both univariable (p
Cacti with maximum Kirchhoff index
Wang, Wen-Rui; Pan, Xiang-Feng
2015-01-01
The concept of resistance distance was first proposed by Klein and Randi\\'c. The Kirchhoff index $Kf(G)$ of a graph $G$ is the sum of resistance distance between all pairs of vertices in $G$. A connected graph $G$ is called a cactus if each block of $G$ is either an edge or a cycle. Let $Cat(n;t)$ be the set of connected cacti possessing $n$ vertices and $t$ cycles, where $0\\leq t \\leq \\lfloor\\frac{n-1}{2}\\rfloor$. In this paper, the maximum kirchhoff index of cacti are characterized, as well...
Generic maximum likely scale selection
Pedersen, Kim Steenstrup; Loog, Marco; Markussen, Bo
2007-01-01
The fundamental problem of local scale selection is addressed by means of a novel principle, which is based on maximum likelihood estimation. The principle is generally applicable to a broad variety of image models and descriptors, and provides a generic scale estimation methodology. The focus...... on second order moments of multiple measurements outputs at a fixed location. These measurements, which reflect local image structure, consist in the cases considered here of Gaussian derivatives taken at several scales and/or having different derivative orders....
Euler Characteristic and Quadrilaterals of Normal Surfaces
Tejas Kalelkar
2008-05-01
Let be a compact 3-manifold with a triangulation . We give an inequality relating the Euler characteristic of a surface normally embedded in with the number of normal quadrilaterals in . This gives a relation between a topological invariant of the surface and a quantity derived from its combinatorial description. Secondly, we obtain an inequality relating the number of normal triangles and normal quadrilaterals of , that depends on the maximum number of tetrahedrons that share a vertex in .
Economics and Maximum Entropy Production
Lorenz, R. D.
2003-04-01
Price differentials, sales volume and profit can be seen as analogues of temperature difference, heat flow and work or entropy production in the climate system. One aspect in which economic systems exhibit more clarity than the climate is that the empirical and/or statistical mechanical tendency for systems to seek a maximum in production is very evident in economics, in that the profit motive is very clear. Noting the common link between 1/f noise, power laws and Self-Organized Criticality with Maximum Entropy Production, the power law fluctuations in security and commodity prices is not inconsistent with the analogy. There is an additional thermodynamic analogy, in that scarcity is valued. A commodity concentrated among a few traders is valued highly by the many who do not have it. The market therefore encourages via prices the spreading of those goods among a wider group, just as heat tends to diffuse, increasing entropy. I explore some empirical price-volume relationships of metals and meteorites in this context.
Gutgsell, N S; Del Campo, M; Raychaudhuri, S; Ofengand, J
2001-07-01
This laboratory previously showed that truncation of the gene for RluD, the Escherichia coli pseudouridine synthase responsible for synthesis of 23S rRNA pseudouridines 1911, 1915, and 1917, blocks pseudouridine formation and inhibits growth. We now show that RluD mutants at the essential aspartate 139 allow these two functions of RluD to be separated. In vitro, RluD with aspartate 139 replaced by threonine or asparagine is completely inactive. In vivo, the growth defect could be completely restored by transformation of an RluD-inactive strain with plasmids carrying genes for RluD with aspartate 139 replaced by threonine or asparagine. Pseudouridine sequencing of the 23S rRNA from these transformed strains demonstrated the lack of these pseudouridines. Pseudoreversion, which has previously been shown to restore growth without pseudouridine formation by mutation at a distant position on the chromosome, was not responsible because transformation with empty vector under identical conditions did not alter the growth rate.
Objects of maximum electromagnetic chirality
Fernandez-Corbaton, Ivan
2015-01-01
We introduce a definition of the electromagnetic chirality of an object and show that it has an upper bound. The upper bound is attained if and only if the object is transparent for fields of one handedness (helicity). Additionally, electromagnetic duality symmetry, i.e. helicity preservation upon scattering, turns out to be a necessary condition for reciprocal scatterers to attain the upper bound. We use these results to provide requirements for the design of such extremal scatterers. The requirements can be formulated as constraints on the polarizability tensors for dipolar scatterers or as material constitutive relations. We also outline two applications for objects of maximum electromagnetic chirality: A twofold resonantly enhanced and background free circular dichroism measurement setup, and angle independent helicity filtering glasses.
Maximum mutual information regularized classification
Wang, Jim Jing-Yan
2014-09-07
In this paper, a novel pattern classification approach is proposed by regularizing the classifier learning to maximize mutual information between the classification response and the true class label. We argue that, with the learned classifier, the uncertainty of the true class label of a data sample should be reduced by knowing its classification response as much as possible. The reduced uncertainty is measured by the mutual information between the classification response and the true class label. To this end, when learning a linear classifier, we propose to maximize the mutual information between classification responses and true class labels of training samples, besides minimizing the classification error and reducing the classifier complexity. An objective function is constructed by modeling mutual information with entropy estimation, and it is optimized by a gradient descend method in an iterative algorithm. Experiments on two real world pattern classification problems show the significant improvements achieved by maximum mutual information regularization.
The strong maximum principle revisited
Pucci, Patrizia; Serrin, James
In this paper we first present the classical maximum principle due to E. Hopf, together with an extended commentary and discussion of Hopf's paper. We emphasize the comparison technique invented by Hopf to prove this principle, which has since become a main mathematical tool for the study of second order elliptic partial differential equations and has generated an enormous number of important applications. While Hopf's principle is generally understood to apply to linear equations, it is in fact also crucial in nonlinear theories, such as those under consideration here. In particular, we shall treat and discuss recent generalizations of the strong maximum principle, and also the compact support principle, for the case of singular quasilinear elliptic differential inequalities, under generally weak assumptions on the quasilinear operators and the nonlinearities involved. Our principal interest is in necessary and sufficient conditions for the validity of both principles; in exposing and simplifying earlier proofs of corresponding results; and in extending the conclusions to wider classes of singular operators than previously considered. The results have unexpected ramifications for other problems, as will develop from the exposition, e.g. two point boundary value problems for singular quasilinear ordinary differential equations (Sections 3 and 4); the exterior Dirichlet boundary value problem (Section 5); the existence of dead cores and compact support solutions, i.e. dead cores at infinity (Section 7); Euler-Lagrange inequalities on a Riemannian manifold (Section 9); comparison and uniqueness theorems for solutions of singular quasilinear differential inequalities (Section 10). The case of p-regular elliptic inequalities is briefly considered in Section 11.
Penalized maximum likelihood estimation and variable selection in geostatistics
Chu, Tingjin; Wang, Haonan; 10.1214/11-AOS919
2012-01-01
We consider the problem of selecting covariates in spatial linear models with Gaussian process errors. Penalized maximum likelihood estimation (PMLE) that enables simultaneous variable selection and parameter estimation is developed and, for ease of computation, PMLE is approximated by one-step sparse estimation (OSE). To further improve computational efficiency, particularly with large sample sizes, we propose penalized maximum covariance-tapered likelihood estimation (PMLE$_{\\mathrm{T}}$) and its one-step sparse estimation (OSE$_{\\mathrm{T}}$). General forms of penalty functions with an emphasis on smoothly clipped absolute deviation are used for penalized maximum likelihood. Theoretical properties of PMLE and OSE, as well as their approximations PMLE$_{\\mathrm{T}}$ and OSE$_{\\mathrm{T}}$ using covariance tapering, are derived, including consistency, sparsity, asymptotic normality and the oracle properties. For covariance tapering, a by-product of our theoretical results is consistency and asymptotic normal...
沈燕华; 贺声; 高云华; 张云山; 李馨
2009-01-01
目的 应用二维应变超声心动图(2DSE)定量分析常规方法 显示室壁运动正常冠心病患者的左室收缩运动,探讨其临床应用意义.方法 采集经冠脉造影证实的38例冠心病和31例对照组患者的心尖长轴、四腔和二腔观的二维灰阶动态图像,应用二维应变软件测量左室壁各节段的收缩应变、应变率及整体长轴应变(GLS),心尖双平面Simpson 法测量左室射血分数(LVEF),比较两组参数值及分析LVEF与GLS的相关性.结果 组间比较,各项常规超声指标均无统计学差异(P>0.05),部分节段的应变、应变率及GLS有统计学差异(P0.05).Strain and strain rate have significant differences at several segments（P<0.05 or P<0.01).GLS has good correlations with LVEF (P<0.05).Conclusions 2DSE has higher sensitivity than conventional echocardiography in the diagnosis of myocardial ischemia.
Forming limit strains of interstitial free-IF steel sheet
Bressan, José Divo; Moreira, Luciano Pessanha; Freitas, Maria Carolina dos Santos
2016-10-01
Present work examines mathematical models to predict the onset of localized necking in sheet metal forming of interstitial free steel, such as biaxial stretching and deep drawing. Forming Limit Curve, FLC, which is an essential material parameter necessary to numerical simulation by FEM, of IF steel sheet was assessed experimentally by Nakajima testing and ASAME software. The "Map of Principal Surface Limit Strains - MPLS", shows the experimental FLC which is the plot of principal true strains in the sheet metal surface (ɛ1, ɛ2), occurring at critical points obtained in laboratory formability tests or in the fabrication process of parts. Two types of undesirable rupture mechanisms can occur in sheet metal forming products: localized necking and rupture by induced shear stress. Therefore, two kinds of limit strain curves can be plotted in the forming map: the local necking limit curve FLC-N and the shear stress rupture limit curve FLC-S. Localized necking is theoretically anticipated to occur by two mathematical models: Marciniak-Kuczynski modeling, hereafter named M-K approach, and D-Bressan modeling. In the M-K approach, local necking originates at an initial sheet thickness heterogeneity or defect fo = tob/toa. The strain state inside the evolving groove moves to plane strain and the limit strain ɛ1* is attained when the strain ɛ1a outside the groove or neck stop to increase. In the D-Bressan model, local necking is proposed to initiate at the instability point of maximum load, at a thickness defect (λ/μ)diffuse inside the grooved sheet thickness. The inception of visible grooving on the sheet surface evolves from instability point to localized (λ/μ)crit and final rupture, during further sheet metal straining. Work hardening law is defined for a strain and strain-rate material by the effective current stress. The average experimental hardening law curve for tensile tests at 0°, 45° and 90°, assuming normal anisotropy, was used to analyze the plasticity
Maximum likelihood estimation of finite mixture model for economic data
Phoong, Seuk-Yen; Ismail, Mohd Tahir
2014-06-01
Finite mixture model is a mixture model with finite-dimension. This models are provides a natural representation of heterogeneity in a finite number of latent classes. In addition, finite mixture models also known as latent class models or unsupervised learning models. Recently, maximum likelihood estimation fitted finite mixture models has greatly drawn statistician's attention. The main reason is because maximum likelihood estimation is a powerful statistical method which provides consistent findings as the sample sizes increases to infinity. Thus, the application of maximum likelihood estimation is used to fit finite mixture model in the present paper in order to explore the relationship between nonlinear economic data. In this paper, a two-component normal mixture model is fitted by maximum likelihood estimation in order to investigate the relationship among stock market price and rubber price for sampled countries. Results described that there is a negative effect among rubber price and stock market price for Malaysia, Thailand, Philippines and Indonesia.
Maximum entropy production in daisyworld
Maunu, Haley A.; Knuth, Kevin H.
2012-05-01
Daisyworld was first introduced in 1983 by Watson and Lovelock as a model that illustrates how life can influence a planet's climate. These models typically involve modeling a planetary surface on which black and white daisies can grow thus influencing the local surface albedo and therefore also the temperature distribution. Since then, variations of daisyworld have been applied to study problems ranging from ecological systems to global climate. Much of the interest in daisyworld models is due to the fact that they enable one to study self-regulating systems. These models are nonlinear, and as such they exhibit sensitive dependence on initial conditions, and depending on the specifics of the model they can also exhibit feedback loops, oscillations, and chaotic behavior. Many daisyworld models are thermodynamic in nature in that they rely on heat flux and temperature gradients. However, what is not well-known is whether, or even why, a daisyworld model might settle into a maximum entropy production (MEP) state. With the aim to better understand these systems, this paper will discuss what is known about the role of MEP in daisyworld models.
Maximum stellar iron core mass
F W Giacobbe
2003-03-01
An analytical method of estimating the mass of a stellar iron core, just prior to core collapse, is described in this paper. The method employed depends, in part, upon an estimate of the true relativistic mass increase experienced by electrons within a highly compressed iron core, just prior to core collapse, and is signiﬁcantly different from a more typical Chandrasekhar mass limit approach. This technique produced a maximum stellar iron core mass value of 2.69 × 1030 kg (1.35 solar masses). This mass value is very near to the typical mass values found for neutron stars in a recent survey of actual neutron star masses. Although slightly lower and higher neutron star masses may also be found, lower mass neutron stars are believed to be formed as a result of enhanced iron core compression due to the weight of non-ferrous matter overlying the iron cores within large stars. And, higher mass neutron stars are likely to be formed as a result of fallback or accretion of additional matter after an initial collapse event involving an iron core having a mass no greater than 2.69 × 1030 kg.
Maximum Matchings via Glauber Dynamics
Jindal, Anant; Pal, Manjish
2011-01-01
In this paper we study the classic problem of computing a maximum cardinality matching in general graphs $G = (V, E)$. The best known algorithm for this problem till date runs in $O(m \\sqrt{n})$ time due to Micali and Vazirani \\cite{MV80}. Even for general bipartite graphs this is the best known running time (the algorithm of Karp and Hopcroft \\cite{HK73} also achieves this bound). For regular bipartite graphs one can achieve an $O(m)$ time algorithm which, following a series of papers, has been recently improved to $O(n \\log n)$ by Goel, Kapralov and Khanna (STOC 2010) \\cite{GKK10}. In this paper we present a randomized algorithm based on the Markov Chain Monte Carlo paradigm which runs in $O(m \\log^2 n)$ time, thereby obtaining a significant improvement over \\cite{MV80}. We use a Markov chain similar to the \\emph{hard-core model} for Glauber Dynamics with \\emph{fugacity} parameter $\\lambda$, which is used to sample independent sets in a graph from the Gibbs Distribution \\cite{V99}, to design a faster algori...
2011-01-10
...: Establishing Maximum Allowable Operating Pressure or Maximum Operating Pressure Using Record Evidence, and... facilities of their responsibilities, under Federal integrity management (IM) regulations, to perform... system, especially when calculating Maximum Allowable Operating Pressure (MAOP) or Maximum Operating...
The Maximum Effective Moment Criterion (MEMC) and Its Implications in Structural Geology
无
2006-01-01
The Mohr-Coulomb criterion has been widely used to explain formation of fractures.However, it fails to explain large strain deformation that widely occurs in nature. There is presently a σ1-σ3 represents the yield strength of the related rock, L is a unit length and α is the angle between σ1and deformation bands. This criterion demonstrates that the maximum value appears at angles of ±54.7° to σ1 and there is a slight difference in the moment in the range of 55°±10°. The range covers the whole observations available from nature and experiments. Its major implications include: (1) it can be used to determine the stress state when the related deformation features formed; (2) it provides a new approach to determine the Wk of the related ductile shear zone if only the ratio of the vorticity and strain rate remains fixed; (3) It can be used to explain (a) the obtuse angle in the contraction direction of conjugate kink-bands and extensional crenulation cleavages, (b) formation of low-angle normal faults and high-angle reverse faults, (c) lozenge ductile shear zones in basement terranes, (d) some crocodile structures in seismic profiles and (e) detachment folds in foreland basins.
The Sherpa Maximum Likelihood Estimator
Nguyen, D.; Doe, S.; Evans, I.; Hain, R.; Primini, F.
2011-07-01
A primary goal for the second release of the Chandra Source Catalog (CSC) is to include X-ray sources with as few as 5 photon counts detected in stacked observations of the same field, while maintaining acceptable detection efficiency and false source rates. Aggressive source detection methods will result in detection of many false positive source candidates. Candidate detections will then be sent to a new tool, the Maximum Likelihood Estimator (MLE), to evaluate the likelihood that a detection is a real source. MLE uses the Sherpa modeling and fitting engine to fit a model of a background and source to multiple overlapping candidate source regions. A background model is calculated by simultaneously fitting the observed photon flux in multiple background regions. This model is used to determine the quality of the fit statistic for a background-only hypothesis in the potential source region. The statistic for a background-plus-source hypothesis is calculated by adding a Gaussian source model convolved with the appropriate Chandra point spread function (PSF) and simultaneously fitting the observed photon flux in each observation in the stack. Since a candidate source may be located anywhere in the field of view of each stacked observation, a different PSF must be used for each observation because of the strong spatial dependence of the Chandra PSF. The likelihood of a valid source being detected is a function of the two statistics (for background alone, and for background-plus-source). The MLE tool is an extensible Python module with potential for use by the general Chandra user.
Vestige: Maximum likelihood phylogenetic footprinting
Maxwell Peter
2005-05-01
Full Text Available Abstract Background Phylogenetic footprinting is the identification of functional regions of DNA by their evolutionary conservation. This is achieved by comparing orthologous regions from multiple species and identifying the DNA regions that have diverged less than neutral DNA. Vestige is a phylogenetic footprinting package built on the PyEvolve toolkit that uses probabilistic molecular evolutionary modelling to represent aspects of sequence evolution, including the conventional divergence measure employed by other footprinting approaches. In addition to measuring the divergence, Vestige allows the expansion of the definition of a phylogenetic footprint to include variation in the distribution of any molecular evolutionary processes. This is achieved by displaying the distribution of model parameters that represent partitions of molecular evolutionary substitutions. Examination of the spatial incidence of these effects across regions of the genome can identify DNA segments that differ in the nature of the evolutionary process. Results Vestige was applied to a reference dataset of the SCL locus from four species and provided clear identification of the known conserved regions in this dataset. To demonstrate the flexibility to use diverse models of molecular evolution and dissect the nature of the evolutionary process Vestige was used to footprint the Ka/Ks ratio in primate BRCA1 with a codon model of evolution. Two regions of putative adaptive evolution were identified illustrating the ability of Vestige to represent the spatial distribution of distinct molecular evolutionary processes. Conclusion Vestige provides a flexible, open platform for phylogenetic footprinting. Underpinned by the PyEvolve toolkit, Vestige provides a framework for visualising the signatures of evolutionary processes across the genome of numerous organisms simultaneously. By exploiting the maximum-likelihood statistical framework, the complex interplay between mutational
Granular mechanics of normally consolidated fine soils
Yanqui, Calixtro
2017-06-01
In this paper, duality is demonstrated to be one of the inherent properties of granular packings, by mapping the stress-strain curve into the diagram that relates the pore ratio and the localization of the contact point. In this way, it is demonstrated that critical state is not related to the maximum void ratio, but to a unique value related to two different angles of packing, one limiting the domain of the dense state, and other limiting the domain of the loose state. As a consequence, packings can be dilative or contractive, as mutually exclusive states, except by the critical state point, where equations for both granular packings are equally valid. Further analysis shows that stresses, in a dilative packing, are transmitted by chains of contact forces, and, in a contractive packing, by shear forces. So that, stresses, for the first case, depend on the initial void ratio, and, for the second case, are independent. As it is known, normally consolidated and lightly overconsolidated fine soils are in loose state, and, hence, their strength is constant, because it does not depend on their initial void ratio; except at the critical state, for which, the consolidated-drained angle of friction is related to the plasticity index or the liquid limit. In this fashion, experimental results reported by several authors around the world are confronted with the theory, showing a good agreement.
Kirk, David G; Palonen, Eveliina; Korkeala, Hannu; Lindström, Miia
2014-04-01
Heat-resistant spores of Clostridium botulinum can withstand the pasteurization processes in modern food processing. This poses a risk to food safety as spores may germinate into botulinum neurotoxin-producing vegetative cells. Sporulation in Bacillus subtilis, the model organism for sporulation, is regulated by the transcription factor Spo0A and four alternative sigma factors, SigF, SigE, SigG, and SigK. While the corresponding regulators are found in available genomes of C. botulinum, little is known about their expression. To accurately measure the expression of these genes using quantitative reverse-transcriptase PCR (RT-qPCR) during the exponential and stationary growth phases, a suitable normalization reference gene is required. 16S rrn, adK, alaS, era, gluD, gyrA, rpoC, and rpsJ were selected as the candidate reference genes. The most stable candidate reference gene was 16S ribosomal RNA gene (rrn), based on its low coefficient of variation (1.81%) measured during the 18-h study time. Using 16S rrn as the normalization reference gene, the relative expression levels of spo0A, sigF, sigE, sigG, and sigK were measured over 18h. The pattern of expression showed spo0A expression during the logarithmic growth phase, followed by a drop in expression upon entry to the stationary phase. Expression levels of sigF, sigE, and sigG peaked simultaneously at the end of the exponential growth phase. Peak expression of sigK occurred at 18h, however low levels of expression were detected during the exponential phase. These findings suggest these sigma factors play a role in C. botulinum sporulation that is similar, but not equal, to their role in the B. subtilis model.
U.S. Monthly Climate Normals (1971-2000)
National Oceanic and Atmospheric Administration, Department of Commerce — U.S. Monthly Climate Normals (1971-2000) is archived at the National Climatic Data Center (NCDC). DSI-9641C include climatological normals based on monthly maximum,...
Growth of group II Clostridium botulinum strains at extreme temperatures.
Derman, Yağmur; Lindström, Miia; Selby, Katja; Korkeala, Hannu
2011-11-01
The minimum and maximum growth temperatures and the maximum growth rates at 10, 30, 37, and 40°C were determined for 24 group II Clostridium botulinum strains. Genetic diversity of the strains was revealed by amplified fragment length polymorphism (AFLP) analysis. The minimum growth temperatures ranged from 6.2 to 8.6°C, and the maximum growth temperatures ranged from 34.7 to 39.9°C. The mean maximum growth temperatures and mean maximum growth rates of type E strains at 37°C were significantly higher than those of type B and type F strains. A significant correlation between maximum growth rates at 37°C and maximum growth temperatures was found for all strains. Some type E strains with a high minimum growth temperature also had a higher maximum growth rate at 37°C than at 30°C, which suggests that some group II C. botulinum strains are more mesophilic in their growth properties than others. We found relatively small differences between AFLP clusters, indicating that diverse genetic background among the strains was not reflected in the growth properties. The growth characteristics of group II C. botulinum and some type E strains with mesophilic growth properties may have an impact on inoculation studies and predictive modeling for assessing the safety of foods.
Normal Pressure Hydrocephalus (NPH)
... your local chapter Join our online community Normal Pressure Hydrocephalus (NPH) Normal pressure hydrocephalus is a brain ... About Symptoms Diagnosis Causes & risks Treatments About Normal Pressure Hydrocephalus Normal pressure hydrocephalus occurs when excess cerebrospinal ...
Garrett, W E
1996-01-01
with respect to the beneficial effects of warm-up, temperature, and stretching on the mechanical properties of muscle. These benefits potentially reduce the risks of strain injury to the muscle. Fortunately, many of the factors protecting muscle, such as strength, endurance, and flexibility, are also essential for maximum performance. Future studies should delineate the repair and recovery process emphasizing not only the recovery of function, but also the susceptibility to reinjury during the recovery phase.
Finite Element Modeling of the Behavior of Armor Materials Under High Strain Rates and Large Strains
Polyzois, Ioannis
For years high strength steels and alloys have been widely used by the military for making armor plates. Advances in technology have led to the development of materials with improved resistance to penetration and deformation. Until recently, the behavior of these materials under high strain rates and large strains has been primarily based on laboratory testing using the Split Hopkinson Pressure Bar apparatus. With the advent of sophisticated computer programs, computer modeling and finite element simulations are being developed to predict the deformation behavior of these metals for a variety of conditions similar to those experienced during combat. In the present investigation, a modified direct impact Split Hopkinson Pressure Bar apparatus was modeled using the finite element software ABAQUS 6.8 for the purpose of simulating high strain rate compression of specimens of three armor materials: maraging steel 300, high hardness armor (HHA), and aluminum alloy 5083. These armor materials, provided by the Canadian Department of National Defence, were tested at the University of Manitoba by others. In this study, the empirical Johnson-Cook visco-plastic and damage models were used to simulate the deformation behavior obtained experimentally. A series of stress-time plots at various projectile impact momenta were produced and verified by comparison with experimental data. The impact momentum parameter was chosen rather than projectile velocity to normalize the initial conditions for each simulation. Phenomena such as the formation of adiabatic shear bands caused by deformation at high strains and strain rates were investigated through simulations. It was found that the Johnson-Cook model can accurately simulate the behavior of body-centered cubic (BCC) metals such as steels. The maximum shear stress was calculated for each simulation at various impact momenta. The finite element model showed that shear failure first occurred in the center of the cylindrical specimen and
MM98.57 Quantification of Combined Strain Paths
Nielsen, Morten Sturgård; Wanheim, Tarras
1998-01-01
is to describe the total strain history as a curve in the 6-dimensional shear strain, normal strain space. In order to be able to use these experimental data for calculation, the development of this strain curve must be transformed into a set of scalar relations that may be used for predicting the yield surface...
Current horizontal strain field in Chinese mainland derived from GPS data
杨国华; 李延兴; 韩月萍; 胡新康; 巩曰沐
2002-01-01
The current crustal horizontal strain field is given in the paper based on the horizontal movement rates obtained from about 400 GPS stations located in Chinese mainland and its surrounding areas. The results show: a) The horizontal strain in Chinese mainland is "strong in the west and weak in the east" and the shear strain is larger than the normal strain (absolute magnitude). The general strain magnitude is 10-8/a and in local regions is 10-7/a, but the strain distribution is not homogeneous; b) The regions with the most significant NS-trending strains are the Himalayas belt along the western segment of Chinese southern boundary, the segment of 36°N～42°N along the western boundary and the northern margin of Qaidam block; c) The EW-trending strain variation along the western margin is the maximum and it is characterized by the alternatively positive and negative variations from the west to the east; d) The regions with larger magnitudes of REN (NE-trending shear strain) and Rmax (maximum shear strain) are Himalayas belt, the segment of 36°N～42°N along the western boundary, the western part of Qaidam block, Sichuan-Yunnan (Chuan-Dian) rhombic block and the border area of Alxa, Qilian and Tarim blocks; e) The surrounding area of Qinghai-Xizang (Qingzang) block is mainly superfacial contraction and its interior is basically superfacial expansion. The area to its north is mainly superfacial contraction with the maximum magnitude along the western boundary and the minimum magnitude in the eastern part (except Yanshan tectonic zone); f) In the west of the western part, the principal compressive strain is in the SN direction and the principal tensile strain is in the EW direction, while in the eastern margin area of the western part, the principal compressive strain is proximate EW and the principal tensile strain is about SN. The principal strain direction of Chuan-Dian rhombic block has changed greatly. In the northern part, it is compression in the EW and
Smits, Iris A.M.; Timmerman, Marieke E.; Stegeman, Alwin
Maximum likelihood estimation of the linear factor model for continuous items assumes normally distributed item scores. We consider deviations from normality by means of a skew-normally distributed factor model or a quadratic factor model. We show that the item distributions under a skew-normal
Normalization: A Preprocessing Stage
Patro, S. Gopal Krishna; Sahu, Kishore Kumar
2015-01-01
As we know that the normalization is a pre-processing stage of any type problem statement. Especially normalization takes important role in the field of soft computing, cloud computing etc. for manipulation of data like scale down or scale up the range of data before it becomes used for further stage. There are so many normalization techniques are there namely Min-Max normalization, Z-score normalization and Decimal scaling normalization. So by referring these normalization techniques we are ...
Receiver function estimated by maximum entropy deconvolution
吴庆举; 田小波; 张乃铃; 李卫平; 曾融生
2003-01-01
Maximum entropy deconvolution is presented to estimate receiver function, with the maximum entropy as the rule to determine auto-correlation and cross-correlation functions. The Toeplitz equation and Levinson algorithm are used to calculate the iterative formula of error-predicting filter, and receiver function is then estimated. During extrapolation, reflective coefficient is always less than 1, which keeps maximum entropy deconvolution stable. The maximum entropy of the data outside window increases the resolution of receiver function. Both synthetic and real seismograms show that maximum entropy deconvolution is an effective method to measure receiver function in time-domain.
Maximum Power from a Solar Panel
Michael Miller
2010-01-01
Full Text Available Solar energy has become a promising alternative to conventional fossil fuel sources. Solar panels are used to collect solar radiation and convert it into electricity. One of the techniques used to maximize the effectiveness of this energy alternative is to maximize the power output of the solar collector. In this project the maximum power is calculated by determining the voltage and the current of maximum power. These quantities are determined by finding the maximum value for the equation for power using differentiation. After the maximum values are found for each time of day, each individual quantity, voltage of maximum power, current of maximum power, and maximum power is plotted as a function of the time of day.
Application of the maximum entropy method to profile analysis
Armstrong, N.; Kalceff, W. [University of Technology, Department of Applied Physics, Sydney, NSW (Australia); Cline, J.P. [National Institute of Standards and Technology, Gaithersburg, (United States)
1999-12-01
Full text: A maximum entropy (MaxEnt) method for analysing crystallite size- and strain-induced x-ray profile broadening is presented. This method treats the problems of determining the specimen profile, crystallite size distribution, and strain distribution in a general way by considering them as inverse problems. A common difficulty faced by many experimenters is their inability to determine a well-conditioned solution of the integral equation, which preserves the positivity of the profile or distribution. We show that the MaxEnt method overcomes this problem, while also enabling a priori information, in the form of a model, to be introduced into it. Additionally, we demonstrate that the method is fully quantitative, in that uncertainties in the solution profile or solution distribution can be determined and used in subsequent calculations, including mean particle sizes and rms strain. An outline of the MaxEnt method is presented for the specific problems of determining the specimen profile and crystallite or strain distributions for the correspondingly broadened profiles. This approach offers an alternative to standard methods such as those of Williamson-Hall and Warren-Averbach. An application of the MaxEnt method is demonstrated in the analysis of alumina size-broadened diffraction data (from NIST, Gaithersburg). It is used to determine the specimen profile and column-length distribution of the scattering domains. Finally, these results are compared with the corresponding Williamson-Hall and Warren-Averbach analyses. Copyright (1999) Australian X-ray Analytical Association Inc.
Speckle Tracking Imaging in Normal Stress Echocardiography.
Leitman, Marina; Tyomkin, Vladimir; Peleg, Eli; Zyssman, Izhak; Rosenblatt, Simcha; Sucher, Edgar; Gercenshtein, Vered; Vered, Zvi
2017-04-01
Exercise stress echocardiography is a widely used modality for the diagnosis and follow-up of patients with coronary artery disease. During the last decade, speckle tracking imaging has been used increasingly for accurate evaluation of cardiac function. This work aimed to assess speckle-tracking imaging parameters during nonischemic exercise stress echocardiography. During 2011 to 2014 we studied 46 patients without history of coronary artery disease, who completed exercise stress echocardiography protocol, had normal left ventricular function, a nonischemic response, and satisfactory image quality. These exams were analyzed with speckle-tracking imaging software at rest and at peak exercise. Peak strain and time-to-peak strain were measured at rest and after exercise. Clinical follow-up included a telephone contact 1 to 3 years after stress echo exam, confirming freedom from coronary events during this time. Global and regional peak strain increased following exercise. Time-to-peak global and regional strain and time-to-peak strain adjusted to the heart rate were significantly shorter in all segments after exercise. Rest-to-stress ratio of time-to-peak strain adjusted to the heart rate was 2.0 to 2.8. Global and regional peak strain rise during normal exercise echocardiography. Peak global and regional strain occur before or shortly after aortic valve closure at rest and after exercise, and the delay is more apparent at the basal segments. Time-to-peak strain normally shortens significantly during exercise; after adjustment to heart rate it shortens by a ratio of 2.0 to 2.8. These data may be useful for interpretation of future exercise stress speckle-tracking echocardiography studies. © 2016 by the American Institute of Ultrasound in Medicine.
Thode, Henry C
2002-01-01
Describes the selection, design, theory, and application of tests for normality. Covers robust estimation, test power, and univariate and multivariate normality. Contains tests ofr multivariate normality and coordinate-dependent and invariant approaches.
... flexor - aftercare; Hip flexor injury - aftercare; Hip flexor tear - aftercare; Iliopsoas strain - aftercare; Strained iliopsoas muscle - aftercare; Torn iliopsoas muscle - aftercare; Psoas strain - aftercare
无
2007-01-01
To detect and compare the systolic strain rate (SR) and strain in the infarct and ischemic myocardiu mby strain rate imaging ( SRI), in order to explore the clinical value of SRI in evaluating regional left ventricular systolic dysfunction. Methods Patients with coronary artery disease were divided into angina pectoris ( 11 cases) and myocardial infarction (21 cases) groups. Twenty age-matched normal subjects served as the control group. Septal, lateral, anterior, inferior, anteroseptal and posterior walls of the left ventricle were respectively scanned using color tissue Doppler imaging (TDI). Then SR and strain curves were derived from TDI for basal, middle and apical segments of each wall.SRI parameters were: Systolic SR ( Srsys), systolic strain (εsys) and maximum strain (εmax). Results Compared with normal segments, Srsys, εsys and εmax decreased significantly in the infarct and ischemic segments ( P ＜ 0.01 ). Compared with ischemic segments, Srsys, εsys and εmax decreased significantly in the infarct segments ( P ＜0.05 ). Conclusions Srsys, εsys and εmax measured by SRI can be used to quantitatively analyze regional left ventricular systolic dysfunction in patients with coronary artery disease, and aid in differentiating infarct from ischemic myocardium.
The inverse maximum dynamic flow problem
BAGHERIAN; Mehri
2010-01-01
We consider the inverse maximum dynamic flow (IMDF) problem.IMDF problem can be described as: how to change the capacity vector of a dynamic network as little as possible so that a given feasible dynamic flow becomes a maximum dynamic flow.After discussing some characteristics of this problem,it is converted to a constrained minimum dynamic cut problem.Then an efficient algorithm which uses two maximum dynamic flow algorithms is proposed to solve the problem.
Maximum permissible voltage of YBCO coated conductors
Wen, J.; Lin, B.; Sheng, J.; Xu, J.; Jin, Z. [Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China); Hong, Z., E-mail: zhiyong.hong@sjtu.edu.cn [Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China); Wang, D.; Zhou, H.; Shen, X.; Shen, C. [Qingpu Power Supply Company, State Grid Shanghai Municipal Electric Power Company, Shanghai (China)
2014-06-15
Highlights: • We examine three kinds of tapes’ maximum permissible voltage. • We examine the relationship between quenching duration and maximum permissible voltage. • Continuous I{sub c} degradations under repetitive quenching where tapes reaching maximum permissible voltage. • The relationship between maximum permissible voltage and resistance, temperature. - Abstract: Superconducting fault current limiter (SFCL) could reduce short circuit currents in electrical power system. One of the most important thing in developing SFCL is to find out the maximum permissible voltage of each limiting element. The maximum permissible voltage is defined as the maximum voltage per unit length at which the YBCO coated conductors (CC) do not suffer from critical current (I{sub c}) degradation or burnout. In this research, the time of quenching process is changed and voltage is raised until the I{sub c} degradation or burnout happens. YBCO coated conductors test in the experiment are from American superconductor (AMSC) and Shanghai Jiao Tong University (SJTU). Along with the quenching duration increasing, the maximum permissible voltage of CC decreases. When quenching duration is 100 ms, the maximum permissible of SJTU CC, 12 mm AMSC CC and 4 mm AMSC CC are 0.72 V/cm, 0.52 V/cm and 1.2 V/cm respectively. Based on the results of samples, the whole length of CCs used in the design of a SFCL can be determined.
Differential Inequalities, Normality and Quasi-Normality
Liu, Xiaojun; Pang, Xuecheng
2011-01-01
We prove that if D is a domain in C, alpha>1 and c>0, then the family F of functions meromorphic in D such that |f'(z)|/(1+|f(z)|^alpha)>c for every z in D is normalin D. For alpha=1, the same assumptions imply quasi-normality but not necessarily normality.
Vortex dynamics and surface pressure fluctuations on a normal flat plate
Hemmati, Arman; Wood, David H.; Martinuzzi, Robert J.; Ferrari, Simon W.; Hu, Yaoping
2016-11-01
The effect of vortex formation and interactions on surface pressure fluctuations is examined in the wake of a normal flat plate by analyzing Direct Numerical Simulations at Re =1200. A novel local maximum score-based 3D method is used to track vortex development in the region close to the plate where the major contributions to the surface pressure are generated. Three distinct vortex shedding regimes are identified by changes in the lift and drag fluctuations. The instances of maximum drag coincide with impingement of newly formed vortices on the plate. This results in large and concentrated areas of rotational and strain contributions to generation of pressure fluctuations. Streamwise vortex straining and chordwise stretching are correlated with the large ratios of streamwise to chordwise normal stresses and regions of significant rotational contribution to the pressure. In contrast at the minimum drag, the vorticity field close to the plate is disorganized, and vortex roll-up occurs farther downstream. This leads to a uniform distribution of pressure. This study was supported by Alberta Innovates Technology Futures (AITF) and Natural Sciences and Engineering Research Council of Canada (NSERC).
On the 2m-variable symmetric Boolean functions with maximum algebraic immunity
QU LongJiang; LI Chao
2008-01-01
The properties of the 2m-variable symmetric Boolean functions with maximum al-gebraic immunity are studied in this paper. Their value vectors, algebraic normal forms, and algebraic degrees and weights are all obtained. At last, some necessary conditions for a symmetric Boolean function on even number variables to have maximum algebraic immunity are introduced.
Generalised maximum entropy and heterogeneous technologies
Oude Lansink, A.G.J.M.
1999-01-01
Generalised maximum entropy methods are used to estimate a dual model of production on panel data of Dutch cash crop farms over the period 1970-1992. The generalised maximum entropy approach allows a coherent system of input demand and output supply equations to be estimated for each farm in the sam
20 CFR 229.48 - Family maximum.
2010-04-01
... month on one person's earnings record is limited. This limited amount is called the family maximum. The family maximum used to adjust the social security overall minimum rate is based on the employee's Overall..., when any of the persons entitled to benefits on the insured individual's compensation would, except...
The maximum rotation of a galactic disc
Bottema, R
1997-01-01
The observed stellar velocity dispersions of galactic discs show that the maximum rotation of a disc is on average 63% of the observed maximum rotation. This criterion can, however, not be applied to small or low surface brightness (LSB) galaxies because such systems show, in general, a continuously
On the Distribution of the Studentized Maximum of Equally Correlated Normal Random Variables.
1983-08-01
8217 l LO C7, ) C)WCNULO Wl-C’ Wn 4Wf ’m~~m .-OM)- CD r’uNM - 4,1h f U\\ CINIf r- ’..f N.’I ’ M .lW L, X) D 0 N N Ir,~)I ~CU C MCUWC’ -CWC’I N N M N .- Cl
Murray, M P; Baldwin, J M; Gardner, G M; Sepic, S B; Downs, W J
1977-06-01
Isometric torque of the knee flexor and extensor muscles were recorded for 5 seconds at three knee joint positions. The subjects included healthy men in age groups from 20 to 35 and 45 to 65 years of age. The amplitudes and duration of peak torque and the time to peak torque were measured for each contraction. Peak torque was usually maintaned less than 0.1 second and never longer than 0.9 second. At each of the three angles, the mean extensor muscle torque was higher than the mean flexor muscle torque in both age groups, and the mean torque for both muscle group was higher among the younger than among the older man. The highest average torque was recorded at the knee angle of 60 degrees for the extensor muscles and 45 degrees for the flexor muscles, but this was not always a stereotyped response either for a given individual or among individuals.
ASASSN-15lo is a Post-Maximum Normal Type Ia Supernova
Leonard, D.C.; Sheehan, P.; McCarthy, D.; Follette, K.; Moustakas, J.; Cantillo, D.; Cazares-Kelly, A.; Cazares-Kelly, S.; Cendes, Y.; Damm, N.; Donati, A.; Douglas, E.; Ferrell, L.; Fosbiner-Elkins, H.; Fox, C.; Greenberg, M.; Hart, K.; Hensley, H.; Holt, A.; Hooper, E.; Juran, C.; Keane, J.; Key, K.; Korus, L.; Lee, T.; Leidig, K.; Merchak, E.; Nessmann, K.; Pendyala, S.; Pirkl, S.; Reeder, J.; Roos, A.; Rounseville, S.; Ruddy, E.; Schlingman, A.; Schlingman, W.; Schwartzman, E.; Shanmugam, V.; Silver, E.; Stein, A.; Stock, N.; Svoboda, B.; Thomas, B.; Thomas, N.; Thompson-Taylor, K.; Walton, H.
2015-01-01
We report spectroscopic classification of ASASSN-15lo (ATel #7673) through inspection of a low-dispersion optical spectrum (range 370-680 nm), obtained with the 2.3-m Bok telescope (+ Boller & Chivens spectrograph) at Kitt Peak on 2015 June 20 UT
Duality of Maximum Entropy and Minimum Divergence
Shinto Eguchi
2014-06-01
Full Text Available We discuss a special class of generalized divergence measures by the use of generator functions. Any divergence measure in the class is separated into the difference between cross and diagonal entropy. The diagonal entropy measure in the class associates with a model of maximum entropy distributions; the divergence measure leads to statistical estimation via minimization, for arbitrarily giving a statistical model. The dualistic relationship between the maximum entropy model and the minimum divergence estimation is explored in the framework of information geometry. The model of maximum entropy distributions is characterized to be totally geodesic with respect to the linear connection associated with the divergence. A natural extension for the classical theory for the maximum likelihood method under the maximum entropy model in terms of the Boltzmann-Gibbs-Shannon entropy is given. We discuss the duality in detail for Tsallis entropy as a typical example.
Fatigue life prediction method for contact wire using maximum local stress
Kim, Yong Seok; Haochuang, Li; Seok, Chang Sung; Koo, Jae Mean [Sungkyunkwan University, Suwon (Korea, Republic of); Lee, Ki Won; Kwon, Sam Young; Cho, Yong Hyeon [Korea Railroad Research Institute, Uiwang (Korea, Republic of)
2015-01-15
Railway contact wires supplying electricity to trains are exposed to repeated mechanical strain and stress caused by their own weight and discontinuous contact with a pantograph during train operation. Since the speed of railway transportation has increased continuously, railway industries have recently reported a number of contact wire failures caused by mechanical fatigue fractures instead of normal wear, which has been a more common failure mechanism. To secure the safety and durability of contact wires in environments with increased train speeds, a bending fatigue test on contact wire has been performed. The test equipment is too complicated to evaluate the fatigue characteristics of contact wire. Thus, the axial tension fatigue test was performed for a standard specimen, and the bending fatigue life for the contact wire structure was then predicted using the maximum local stress occurring at the top of the contact wire. Lastly, the tested bending fatigue life of the structure was compared with the fatigue life predicted by the axial tension fatigue test for verification.
A dual method for maximum entropy restoration
Smith, C. B.
1979-01-01
A simple iterative dual algorithm for maximum entropy image restoration is presented. The dual algorithm involves fewer parameters than conventional minimization in the image space. Minicomputer test results for Fourier synthesis with inadequate phantom data are given.
Maximum Throughput in Multiple-Antenna Systems
Zamani, Mahdi
2012-01-01
The point-to-point multiple-antenna channel is investigated in uncorrelated block fading environment with Rayleigh distribution. The maximum throughput and maximum expected-rate of this channel are derived under the assumption that the transmitter is oblivious to the channel state information (CSI), however, the receiver has perfect CSI. First, we prove that in multiple-input single-output (MISO) channels, the optimum transmission strategy maximizing the throughput is to use all available antennas and perform equal power allocation with uncorrelated signals. Furthermore, to increase the expected-rate, multi-layer coding is applied. Analogously, we establish that sending uncorrelated signals and performing equal power allocation across all available antennas at each layer is optimum. A closed form expression for the maximum continuous-layer expected-rate of MISO channels is also obtained. Moreover, we investigate multiple-input multiple-output (MIMO) channels, and formulate the maximum throughput in the asympt...
Photoemission spectromicroscopy with MAXIMUM at Wisconsin
Ng, W.; Ray-Chaudhuri, A.K.; Cole, R.K.; Wallace, J.; Crossley, S.; Crossley, D.; Chen, G.; Green, M.; Guo, J.; Hansen, R.W.C.; Cerrina, F.; Margaritondo, G. (Dept. of Electrical Engineering, Dept. of Physics and Synchrotron Radiation Center, Univ. of Wisconsin, Madison (USA)); Underwood, J.H.; Korthright, J.; Perera, R.C.C. (Center for X-ray Optics, Accelerator and Fusion Research Div., Lawrence Berkeley Lab., CA (USA))
1990-06-01
We describe the development of the scanning photoemission spectromicroscope MAXIMUM at the Wisoncsin Synchrotron Radiation Center, which uses radiation from a 30-period undulator. The article includes a discussion of the first tests after the initial commissioning. (orig.).
Maximum-likelihood method in quantum estimation
Paris, M G A; Sacchi, M F
2001-01-01
The maximum-likelihood method for quantum estimation is reviewed and applied to the reconstruction of density matrix of spin and radiation as well as to the determination of several parameters of interest in quantum optics.
The maximum entropy technique. System's statistical description
Belashev, B Z
2002-01-01
The maximum entropy technique (MENT) is applied for searching the distribution functions of physical values. MENT takes into consideration the demand of maximum entropy, the characteristics of the system and the connection conditions, naturally. It is allowed to apply MENT for statistical description of closed and open systems. The examples in which MENT had been used for the description of the equilibrium and nonequilibrium states and the states far from the thermodynamical equilibrium are considered
19 CFR 114.23 - Maximum period.
2010-04-01
... 19 Customs Duties 1 2010-04-01 2010-04-01 false Maximum period. 114.23 Section 114.23 Customs... CARNETS Processing of Carnets § 114.23 Maximum period. (a) A.T.A. carnet. No A.T.A. carnet with a period of validity exceeding 1 year from date of issue shall be accepted. This period of validity cannot be...
Maximum-Likelihood Detection Of Noncoherent CPM
Divsalar, Dariush; Simon, Marvin K.
1993-01-01
Simplified detectors proposed for use in maximum-likelihood-sequence detection of symbols in alphabet of size M transmitted by uncoded, full-response continuous phase modulation over radio channel with additive white Gaussian noise. Structures of receivers derived from particular interpretation of maximum-likelihood metrics. Receivers include front ends, structures of which depends only on M, analogous to those in receivers of coherent CPM. Parts of receivers following front ends have structures, complexity of which would depend on N.
Creep measurements confirm steady flow after stress maximum in extension of branched polymer melts
Javier Alvarez, Nicolas; Román Marín, José Manuel; Huang, Qian;
2013-01-01
We provide conclusive evidence of nonmonotonic mechanical behavior in the extension of long-chain branched polymer melts. While nonmonotonic behavior is known to occur for solids, for the case of polymeric melts, this phenomenon is in direct contrast with current theoretical models. We rule out...... the possibility of the overshoot being an experimental artifact by confirming the existence of steady flow after a maximum in the ratio of stress to strain rate versus strain under both constant stress and constant strain-rate kinematics. This observation indicates the omission of important physics from current...
Strain mapping near a triple junction in strained Ni-based alloy using EBSD and biaxial nanogauges
Clair, A. [Laboratoire Interdisciplinaire Carnot de Bourgogne, UMR 5209 CNRS, Universite de Bourgogne, 9 Avenue Alain Savary, BP 47870, 21078 Dijon Cedex (France); Foucault, M.; Calonne, O. [Areva ANP, Centre Technique Departement Corrosion-Chimie, 30 Bd de l' industrie, BP 181, 71205 Le Creusot (France); Lacroute, Y.; Markey, L.; Salazar, M.; Vignal, V. [Laboratoire Interdisciplinaire Carnot de Bourgogne, UMR 5209 CNRS, Universite de Bourgogne, 9 Avenue Alain Savary, BP 47870, 21078 Dijon Cedex (France); Finot, E., E-mail: Eric.Finot@u-bourgogne.fr [Laboratoire Interdisciplinaire Carnot de Bourgogne, UMR 5209 CNRS, Universite de Bourgogne, 9 Avenue Alain Savary, BP 47870, 21078 Dijon Cedex (France)
2011-05-15
Research highlights: > Surface strains measured using nanogauge were compared to the texture obtained by EBSD. > Statistics of the principal strain discern the grains according to the Schmid factor. > Strain hotspots were localized near a triple junction of alloy 600 under tensile loading. > Asymetrical profile of the GB strains is a criterion for surface cracking initiation. - Abstract: A key element for analyzing the crack initiation in strained polycrystalline alloys is the local quantification of the surface strain distribution according to the grain texture. Using electron backscattered diffraction, the local microstructure was determined to both localize a triple junction and deduce the local Schmid factors. Kernel average misorientation (KAM) was also used to map the areas of defect concentration. The maximum principal strain and the in-plane shear strain were quantified using the biaxial nanogauge. Distortions of the array of nanodots used as spot markers were analyzed near the triple junction. The crystallographic orientation and the surface strain were then investigated both statistically for each grain and locally at the grain boundaries. The superimposition of microstructure and strain maps allows the high strain gradient (reaching 3-fold the applied strain) to be localized at preferential grain boundaries near the triple junction. The Schmid factors and the KAM were compared to the maximum principal strain and the in-plane shear strain respectively. The polycrystalline deformation was attributable first to the rotation of some grains, followed by the elongation of all grains along their preferential activated slip systems.
Schmidt, Marvin; Schütze, Andreas; Seelecke, Stefan
2016-06-01
This paper discusses the influence of material strain and strain rate on efficiency and temperature span of elastocaloric cooling processes. The elastocaloric material, a newly developed quaternary Ni-Ti-Cu-V alloy, is characterized at different maximum strains and strain rates. The experiments are performed with a specially designed test setup, which enables the measurement of mechanical and thermal process parameters. The material efficiency is compared to the efficiency of the Carnot process at equivalent thermal operation conditions. This method allows for a direct comparison of the investigated material with other caloric materials.
Marvin Schmidt
2016-06-01
Full Text Available This paper discusses the influence of material strain and strain rate on efficiency and temperature span of elastocaloric cooling processes. The elastocaloric material, a newly developed quaternary Ni-Ti-Cu-V alloy, is characterized at different maximum strains and strain rates. The experiments are performed with a specially designed test setup, which enables the measurement of mechanical and thermal process parameters. The material efficiency is compared to the efficiency of the Carnot process at equivalent thermal operation conditions. This method allows for a direct comparison of the investigated material with other caloric materials.
Geobacteraceae strains and methods
Lovley, Derek R.; Nevin, Kelly P.; Yi, Hana
2015-07-07
Embodiments of the present invention provide a method of producing genetically modified strains of electricigenic microbes that are specifically adapted for the production of electrical current in microbial fuel cells, as well as strains produced by such methods and fuel cells using such strains. In preferred embodiments, the present invention provides genetically modified strains of Geobacter sulfurreducens and methods of using such strains.
MM98.83 Quantification of Combined Strain Paths
Nielsen, Morten Sturgård; Lindegren, Maria; Wanheim, Tarras
1998-01-01
When working with processes where large plastic deformation occurs, a way of desribing the deformation process is to view the whole deformation history as a curve in the 6-dimensional shear strain normal strain space, henceforth called a strain history curve (SHC). This paper focuses on the SHC...
Strain differences in hippocampal EEG are related to strain differences in behaviour in rats
Lier, H. van; Drinkenburg, W.H.I.M.; Coenen, A.M.L.
2003-01-01
To date, EEG studies towards strain differences have focussed on pharmacologically altered or pathological EEG activity, but only few studies have investigated strain differences and normal EEG activity. A strong relation between behaviour and EEG activity has been demonstrated, especially for
Normal fault earthquakes or graviquakes
Doglioni, C.; Carminati, E.; Petricca, P.; Riguzzi, F.
2015-01-01
Earthquakes are dissipation of energy throughout elastic waves. Canonically is the elastic energy accumulated during the interseismic period. However, in crustal extensional settings, gravity is the main energy source for hangingwall fault collapsing. Gravitational potential is about 100 times larger than the observed magnitude, far more than enough to explain the earthquake. Therefore, normal faults have a different mechanism of energy accumulation and dissipation (graviquakes) with respect to other tectonic settings (strike-slip and contractional), where elastic energy allows motion even against gravity. The bigger the involved volume, the larger is their magnitude. The steeper the normal fault, the larger is the vertical displacement and the larger is the seismic energy released. Normal faults activate preferentially at about 60° but they can be shallower in low friction rocks. In low static friction rocks, the fault may partly creep dissipating gravitational energy without releasing great amount of seismic energy. The maximum volume involved by graviquakes is smaller than the other tectonic settings, being the activated fault at most about three times the hypocentre depth, explaining their higher b-value and the lower magnitude of the largest recorded events. Having different phenomenology, graviquakes show peculiar precursors. PMID:26169163
The maximum rotation of a galactic disc
Bottema, R
1997-01-01
The observed stellar velocity dispersions of galactic discs show that the maximum rotation of a disc is on average 63% of the observed maximum rotation. This criterion can, however, not be applied to small or low surface brightness (LSB) galaxies because such systems show, in general, a continuously rising rotation curve until the outermost measured radial position. That is why a general relation has been derived, giving the maximum rotation for a disc depending on the luminosity, surface brightness, and colour of the disc. As a physical basis of this relation serves an adopted fixed mass-to-light ratio as a function of colour. That functionality is consistent with results from population synthesis models and its absolute value is determined from the observed stellar velocity dispersions. The derived maximum disc rotation is compared with a number of observed maximum rotations, clearly demonstrating the need for appreciable amounts of dark matter in the disc region and even more so for LSB galaxies. Matters h...
Maximum permissible voltage of YBCO coated conductors
Wen, J.; Lin, B.; Sheng, J.; Xu, J.; Jin, Z.; Hong, Z.; Wang, D.; Zhou, H.; Shen, X.; Shen, C.
2014-06-01
Superconducting fault current limiter (SFCL) could reduce short circuit currents in electrical power system. One of the most important thing in developing SFCL is to find out the maximum permissible voltage of each limiting element. The maximum permissible voltage is defined as the maximum voltage per unit length at which the YBCO coated conductors (CC) do not suffer from critical current (Ic) degradation or burnout. In this research, the time of quenching process is changed and voltage is raised until the Ic degradation or burnout happens. YBCO coated conductors test in the experiment are from American superconductor (AMSC) and Shanghai Jiao Tong University (SJTU). Along with the quenching duration increasing, the maximum permissible voltage of CC decreases. When quenching duration is 100 ms, the maximum permissible of SJTU CC, 12 mm AMSC CC and 4 mm AMSC CC are 0.72 V/cm, 0.52 V/cm and 1.2 V/cm respectively. Based on the results of samples, the whole length of CCs used in the design of a SFCL can be determined.
Computing Rooted and Unrooted Maximum Consistent Supertrees
van Iersel, Leo
2009-01-01
A chief problem in phylogenetics and database theory is the computation of a maximum consistent tree from a set of rooted or unrooted trees. A standard input are triplets, rooted binary trees on three leaves, or quartets, unrooted binary trees on four leaves. We give exact algorithms constructing rooted and unrooted maximum consistent supertrees in time O(2^n n^5 m^2 log(m)) for a set of m triplets (quartets), each one distinctly leaf-labeled by some subset of n labels. The algorithms extend to weighted triplets (quartets). We further present fast exact algorithms for constructing rooted and unrooted maximum consistent trees in polynomial space. Finally, for a set T of m rooted or unrooted trees with maximum degree D and distinctly leaf-labeled by some subset of a set L of n labels, we compute, in O(2^{mD} n^m m^5 n^6 log(m)) time, a tree distinctly leaf-labeled by a maximum-size subset X of L that all trees in T, when restricted to X, are consistent with.
Maximum magnitude earthquakes induced by fluid injection
McGarr, Arthur F.
2014-01-01
Analysis of numerous case histories of earthquake sequences induced by fluid injection at depth reveals that the maximum magnitude appears to be limited according to the total volume of fluid injected. Similarly, the maximum seismic moment seems to have an upper bound proportional to the total volume of injected fluid. Activities involving fluid injection include (1) hydraulic fracturing of shale formations or coal seams to extract gas and oil, (2) disposal of wastewater from these gas and oil activities by injection into deep aquifers, and (3) the development of enhanced geothermal systems by injecting water into hot, low-permeability rock. Of these three operations, wastewater disposal is observed to be associated with the largest earthquakes, with maximum magnitudes sometimes exceeding 5. To estimate the maximum earthquake that could be induced by a given fluid injection project, the rock mass is assumed to be fully saturated, brittle, to respond to injection with a sequence of earthquakes localized to the region weakened by the pore pressure increase of the injection operation and to have a Gutenberg-Richter magnitude distribution with a b value of 1. If these assumptions correctly describe the circumstances of the largest earthquake, then the maximum seismic moment is limited to the volume of injected liquid times the modulus of rigidity. Observations from the available case histories of earthquakes induced by fluid injection are consistent with this bound on seismic moment. In view of the uncertainties in this analysis, however, this should not be regarded as an absolute physical limit.
Maximum magnitude earthquakes induced by fluid injection
McGarr, A.
2014-02-01
Analysis of numerous case histories of earthquake sequences induced by fluid injection at depth reveals that the maximum magnitude appears to be limited according to the total volume of fluid injected. Similarly, the maximum seismic moment seems to have an upper bound proportional to the total volume of injected fluid. Activities involving fluid injection include (1) hydraulic fracturing of shale formations or coal seams to extract gas and oil, (2) disposal of wastewater from these gas and oil activities by injection into deep aquifers, and (3) the development of enhanced geothermal systems by injecting water into hot, low-permeability rock. Of these three operations, wastewater disposal is observed to be associated with the largest earthquakes, with maximum magnitudes sometimes exceeding 5. To estimate the maximum earthquake that could be induced by a given fluid injection project, the rock mass is assumed to be fully saturated, brittle, to respond to injection with a sequence of earthquakes localized to the region weakened by the pore pressure increase of the injection operation and to have a Gutenberg-Richter magnitude distribution with a b value of 1. If these assumptions correctly describe the circumstances of the largest earthquake, then the maximum seismic moment is limited to the volume of injected liquid times the modulus of rigidity. Observations from the available case histories of earthquakes induced by fluid injection are consistent with this bound on seismic moment. In view of the uncertainties in this analysis, however, this should not be regarded as an absolute physical limit.
... wrestling put people at risk for strains. Gymnastics, tennis, rowing, golf, and other sports that require extensive gripping can increase the risk of hand and forearm strains. Elbow strains sometimes occur in people who participate in ...
Treatment - muscle strain ... Question: How do you treat a muscle strain ? Answer: Rest the strained muscle and apply ice for the first few days after the injury. Anti-inflammatory medicines or acetaminophen ( ...
A muscle strain is the stretching or tearing of muscle fibers. A muscle strain can be caused by sports, exercise, a ... something that is too heavy. Symptoms of a muscle strain include pain, tightness, swelling, tenderness, and the ...
Influences of misfit strains on liquid phase heteroepitaxial growth
Lu, Yanli; Peng, Yingying; Yu, Genggeng; Chen, Zheng
2017-10-01
Influences of misfit strains with different signs on liquid phase heteroepitaxial growth are studied by binary phase field crystal model. It is amazing to find that double islands are formed because of lateral and vertical separation. The morphological evolution of epitaxial layer depends on signs of misfit strains. The maximum atomic layer thickness of double islands under negative misfit strain is larger than that of under positive misfit strain at the same evolutional time, and size differences between light and dark islands is much smaller under negative misfit strain than that of under positive misfit strain. In addition, concentration field and density field approximately have similar variational law along x direction under the same misfit strain but show opposite variational trend under misfit strains with different signs. Generally, free energy of epitaxial growth systems keeps similar variational trend under misfit strains with different signs.
Maximum Multiflow in Wireless Network Coding
Zhou, Jin-Yi; Jiang, Yong; Zheng, Hai-Tao
2012-01-01
In a multihop wireless network, wireless interference is crucial to the maximum multiflow (MMF) problem, which studies the maximum throughput between multiple pairs of sources and sinks. In this paper, we observe that network coding could help to decrease the impacts of wireless interference, and propose a framework to study the MMF problem for multihop wireless networks with network coding. Firstly, a network model is set up to describe the new conflict relations modified by network coding. Then, we formulate a linear programming problem to compute the maximum throughput and show its superiority over one in networks without coding. Finally, the MMF problem in wireless network coding is shown to be NP-hard and a polynomial approximation algorithm is proposed.
The Wiener maximum quadratic assignment problem
Cela, Eranda; Woeginger, Gerhard J
2011-01-01
We investigate a special case of the maximum quadratic assignment problem where one matrix is a product matrix and the other matrix is the distance matrix of a one-dimensional point set. We show that this special case, which we call the Wiener maximum quadratic assignment problem, is NP-hard in the ordinary sense and solvable in pseudo-polynomial time. Our approach also yields a polynomial time solution for the following problem from chemical graph theory: Find a tree that maximizes the Wiener index among all trees with a prescribed degree sequence. This settles an open problem from the literature.
Maximum confidence measurements via probabilistic quantum cloning
Zhang Wen-Hai; Yu Long-Bao; Cao Zhuo-Liang; Ye Liu
2013-01-01
Probabilistic quantum cloning (PQC) cannot copy a set of linearly dependent quantum states.In this paper,we show that if incorrect copies are allowed to be produced,linearly dependent quantum states may also be cloned by the PQC.By exploiting this kind of PQC to clone a special set of three linearly dependent quantum states,we derive the upper bound of the maximum confidence measure of a set.An explicit transformation of the maximum confidence measure is presented.
Maximum floodflows in the conterminous United States
Crippen, John R.; Bue, Conrad D.
1977-01-01
Peak floodflows from thousands of observation sites within the conterminous United States were studied to provide a guide for estimating potential maximum floodflows. Data were selected from 883 sites with drainage areas of less than 10,000 square miles (25,900 square kilometers) and were grouped into regional sets. Outstanding floods for each region were plotted on graphs, and envelope curves were computed that offer reasonable limits for estimates of maximum floods. The curves indicate that floods may occur that are two to three times greater than those known for most streams.
Revealing the Maximum Strength in Nanotwinned Copper
Lu, L.; Chen, X.; Huang, Xiaoxu
2009-01-01
The strength of polycrystalline materials increases with decreasing grain size. Below a critical size, smaller grains might lead to softening, as suggested by atomistic simulations. The strongest size should arise at a transition in deformation mechanism from lattice dislocation activities to grain...... boundary–related processes. We investigated the maximum strength of nanotwinned copper samples with different twin thicknesses. We found that the strength increases with decreasing twin thickness, reaching a maximum at 15 nanometers, followed by a softening at smaller values that is accompanied by enhanced...
The Maximum Resource Bin Packing Problem
Boyar, J.; Epstein, L.; Favrholdt, L.M.
2006-01-01
Usually, for bin packing problems, we try to minimize the number of bins used or in the case of the dual bin packing problem, maximize the number or total size of accepted items. This paper presents results for the opposite problems, where we would like to maximize the number of bins used...... algorithms, First-Fit-Increasing and First-Fit-Decreasing for the maximum resource variant of classical bin packing. For the on-line variant, we define maximum resource variants of classical and dual bin packing. For dual bin packing, no on-line algorithm is competitive. For classical bin packing, we find...
Maximum entropy analysis of EGRET data
Pohl, M.; Strong, A.W.
1997-01-01
EGRET data are usually analysed on the basis of the Maximum-Likelihood method \\cite{ma96} in a search for point sources in excess to a model for the background radiation (e.g. \\cite{hu97}). This method depends strongly on the quality of the background model, and thus may have high systematic unce...... uncertainties in region of strong and uncertain background like the Galactic Center region. Here we show images of such regions obtained by the quantified Maximum-Entropy method. We also discuss a possible further use of MEM in the analysis of problematic regions of the sky....
Revealing the Maximum Strength in Nanotwinned Copper
Lu, L.; Chen, X.; Huang, Xiaoxu
2009-01-01
The strength of polycrystalline materials increases with decreasing grain size. Below a critical size, smaller grains might lead to softening, as suggested by atomistic simulations. The strongest size should arise at a transition in deformation mechanism from lattice dislocation activities to grain...... boundary–related processes. We investigated the maximum strength of nanotwinned copper samples with different twin thicknesses. We found that the strength increases with decreasing twin thickness, reaching a maximum at 15 nanometers, followed by a softening at smaller values that is accompanied by enhanced...
Maximum phytoplankton concentrations in the sea
Jackson, G.A.; Kiørboe, Thomas
2008-01-01
A simplification of plankton dynamics using coagulation theory provides predictions of the maximum algal concentration sustainable in aquatic systems. These predictions have previously been tested successfully against results from iron fertilization experiments. We extend the test to data collected...... in the North Atlantic as part of the Bermuda Atlantic Time Series program as well as data collected off Southern California as part of the Southern California Bight Study program. The observed maximum particulate organic carbon and volumetric particle concentrations are consistent with the predictions...
无
2007-01-01
The permanent deflection of a thin circular plate struck normally at its center by a projectile is studied by an approximate theoretical analysis, FEM simulation and experiment. The plate made of rate sensitive and strain-hardening material undergoes serious local deformation but is not perforated during the impact. The theoretical analysis is based on an energy approach,in which the Cowper-Symonds equation is used for the consideration of strain rate sensitive effects and the parameters involved are determined with the aid of experimental data. The maximum permanent deflections predicted by the theoretical model are compared with those of FEM simulation and published papers obtained both by theory and experiment, and good agreement is achieved for a wide range of thickness of the plates and initial impact velocities.
Maximum-Entropy Meshfree Method for Compressible and Near-Incompressible Elasticity
Ortiz, A; Puso, M A; Sukumar, N
2009-09-04
Numerical integration errors and volumetric locking in the near-incompressible limit are two outstanding issues in Galerkin-based meshfree computations. In this paper, we present a modified Gaussian integration scheme on background cells for meshfree methods that alleviates errors in numerical integration and ensures patch test satisfaction to machine precision. Secondly, a locking-free small-strain elasticity formulation for meshfree methods is proposed, which draws on developments in assumed strain methods and nodal integration techniques. In this study, maximum-entropy basis functions are used; however, the generality of our approach permits the use of any meshfree approximation. Various benchmark problems in two-dimensional compressible and near-incompressible small strain elasticity are presented to demonstrate the accuracy and optimal convergence in the energy norm of the maximum-entropy meshfree formulation.
Effect of biosurfactant from two strains of Pseudomonas on ...
PRECIOUS
2009-12-01
Dec 1, 2009 ... Two Pseudomonas strains isolated from oil-contaminated soil which produce biosurfactant were studied. .... Refinery, Assam, India, each having a varied level of oil conta- mination. ..... Rapid method for monitoring maximum.
Harada, Caroline N; Natelson Love, Marissa C; Triebel, Kristen L
2013-11-01
Even those who do not experience dementia or mild cognitive impairment may experience subtle cognitive changes associated with aging. Normal cognitive changes can affect an older adult's everyday function and quality of life, and a better understanding of this process may help clinicians distinguish normal from disease states. This article describes the neurocognitive changes observed in normal aging, followed by a description of the structural and functional alterations seen in aging brains. Practical implications of normal cognitive aging are then discussed, followed by a discussion of what is known about factors that may mitigate age-associated cognitive decline.
Normalizers of Irreducible Subfactors
Smith, Roger R; Wiggins, Alan D
2007-01-01
We consider normalizers of an irreducible inclusion $N\\subseteq M$ of $\\mathrm{II}_1$ factors. In the infinite index setting an inclusion $uNu^*\\subseteq N$ can be strict, forcing us to also investigate the semigroup of one-sided normalizers. We relate these normalizers of $N$ in $M$ to projections in the basic construction and show that every trace one projection in the relative commutant $N'\\cap $ is of the form $u^*e_Nu$ for some unitary $u\\in M$ with $uNu^*\\subseteq N$. This enables us to identify the normalizers and the algebras they generate in several situations. In particular each normalizer of a tensor product of irreducible subfactors is a tensor product of normalizers modulo a unitary. We also examine normalizers of irreducible subfactors arising from subgroup--group inclusions $H\\subseteq G$. Here the normalizers are the normalizing group elements modulo a unitary from $L(H)$. We are also able to identify the finite trace $L(H)$-bimodules in $\\ell^2(G)$ as double cosets which are also finite union...
Guzmán-López, Oswaldo; Loera, Octavio; Parada, José Luis; Castillo-Morales, Alberto; Martínez-Ramírez, Cándida; Augur, Christopher; Gaime-Perraud, Isabelle; Saucedo-Castañeda, Gerardo
2009-01-01
Eighteen lactic acid bacteria (LAB) strains, isolated from coffee pulp silages were characterized according to both growth and gallic acid (GA) consumption. Prussian blue method was adapted to 96-well microplates to quantify GA in LAB microcultures. Normalized data of growth and GA consumption were used to characterize strains into four phenotypes. A number of 5 LAB strains showed more than 60% of tolerance to GA at 2 g/l; whereas at 10 g/l GA growth inhibition was detected to a different extent depending on each strain, although GA consumption was observed in seven studied strains (>60%). Lactobacillus plantarum L-08 was selected for further studies based on its capacity to degrade GA at 10 g/l (97%). MRS broth and GA concentrations were varied to study the effect on growth of LAB. Cell density and growth rate were optimized by response surface methodology and kinetic analysis. Maximum growth was attained after 7.5 h of cultivation, with a dilution factor of 1-1/2 and a GA concentration between 0.625 and 2.5 g/l. Results indicated that the main factor affecting LAB growth was GA concentration. The main contribution of this study was to propose a novel adaptation of a methodology to characterize and select LAB strains with detoxifying potential of simple phenolics based on GA consumption and tolerance. In addition, the methodology presented in this study integrated the well-known RSM with an experimental design based on successive dilutions.
Guelorget, Bruno [Universite de Technologie de Troyes (UTT), Laboratoire des Systemes Mecaniques et d' ingenierie Simultanee (LASMIS, CNRS FRE 2719), 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France)]. E-mail: bruno.guelorget@utt.fr; Francois, Manuel [Universite de Technologie de Troyes (UTT), Laboratoire des Systemes Mecaniques et d' ingenierie Simultanee (LASMIS, CNRS FRE 2719), 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France); Vial-Edwards, Cristian [Departemento de Ingenieria Mecanica y Metalurgica, Pontificia Universidad Catolica de Chile, Vicuna Mackenna 4860, 6904411 Santiago (Chile); Montay, Guillaume [Universite de Technologie de Troyes (UTT), Laboratoire des Systemes Mecaniques et d' ingenierie Simultanee (LASMIS, CNRS FRE 2719), 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France); Daniel, Laurent [Universite de Technologie de Troyes (UTT), Laboratoire des Systemes Mecaniques et d' ingenierie Simultanee (LASMIS, CNRS FRE 2719), 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France); Lu, Jian [Universite de Technologie de Troyes (UTT), Laboratoire des Systemes Mecaniques et d' ingenierie Simultanee (LASMIS, CNRS FRE 2719), 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France)
2006-01-15
In-plane Electronic Speckle Pattern Interferometry has been successfully used during tensile testing of semi-hard copper sheets in order to measure the strain rate. On one hand, heterogeneity in strain rate field has been found before the maximum of the tensile force ({epsilon} {sup t} {approx_equal} 19.4 and 25.4%, respectively). Thus, a localization phenomenon occurs before the classic Considere's criterion (dF = 0) for the diffuse neck initiation. On the other hand, strain rate measurement before fracture shows the moment where one of the two slip band systems becomes predominant, then strain concentrates in a small area, the shear band. Uncertainty evaluation has been carried out, which shows a very good accuracy of the total strain and the strain rate measurements.
Analysis of Photovoltaic Maximum Power Point Trackers
Veerachary, Mummadi
The photovoltaic generator exhibits a non-linear i-v characteristic and its maximum power point (MPP) varies with solar insolation. An intermediate switch-mode dc-dc converter is required to extract maximum power from the photovoltaic array. In this paper buck, boost and buck-boost topologies are considered and a detailed mathematical analysis, both for continuous and discontinuous inductor current operation, is given for MPP operation. The conditions on the connected load values and duty ratio are derived for achieving the satisfactory maximum power point operation. Further, it is shown that certain load values, falling out of the optimal range, will drive the operating point away from the true maximum power point. Detailed comparison of various topologies for MPPT is given. Selection of the converter topology for a given loading is discussed. Detailed discussion on circuit-oriented model development is given and then MPPT effectiveness of various converter systems is verified through simulations. Proposed theory and analysis is validated through experimental investigations.
On maximum cycle packings in polyhedral graphs
Peter Recht
2014-04-01
Full Text Available This paper addresses upper and lower bounds for the cardinality of a maximum vertex-/edge-disjoint cycle packing in a polyhedral graph G. Bounds on the cardinality of such packings are provided, that depend on the size, the order or the number of faces of G, respectively. Polyhedral graphs are constructed, that attain these bounds.
Hard graphs for the maximum clique problem
Hoede, Cornelis
1988-01-01
The maximum clique problem is one of the NP-complete problems. There are graphs for which a reduction technique exists that transforms the problem for these graphs into one for graphs with specific properties in polynomial time. The resulting graphs do not grow exponentially in order and number. Gra
Maximum Likelihood Estimation of Search Costs
J.L. Moraga-Gonzalez (José Luis); M.R. Wildenbeest (Matthijs)
2006-01-01
textabstractIn a recent paper Hong and Shum (forthcoming) present a structural methodology to estimate search cost distributions. We extend their approach to the case of oligopoly and present a maximum likelihood estimate of the search cost distribution. We apply our method to a data set of online p
Weak Scale From the Maximum Entropy Principle
Hamada, Yuta; Kawana, Kiyoharu
2015-01-01
The theory of multiverse and wormholes suggests that the parameters of the Standard Model are fixed in such a way that the radiation of the $S^{3}$ universe at the final stage $S_{rad}$ becomes maximum, which we call the maximum entropy principle. Although it is difficult to confirm this principle generally, for a few parameters of the Standard Model, we can check whether $S_{rad}$ actually becomes maximum at the observed values. In this paper, we regard $S_{rad}$ at the final stage as a function of the weak scale ( the Higgs expectation value ) $v_{h}$, and show that it becomes maximum around $v_{h}={\\cal{O}}(300\\text{GeV})$ when the dimensionless couplings in the Standard Model, that is, the Higgs self coupling, the gauge couplings, and the Yukawa couplings are fixed. Roughly speaking, we find that the weak scale is given by \\begin{equation} v_{h}\\sim\\frac{T_{BBN}^{2}}{M_{pl}y_{e}^{5}},\
Weak scale from the maximum entropy principle
Hamada, Yuta; Kawai, Hikaru; Kawana, Kiyoharu
2015-03-01
The theory of the multiverse and wormholes suggests that the parameters of the Standard Model (SM) are fixed in such a way that the radiation of the S3 universe at the final stage S_rad becomes maximum, which we call the maximum entropy principle. Although it is difficult to confirm this principle generally, for a few parameters of the SM, we can check whether S_rad actually becomes maximum at the observed values. In this paper, we regard S_rad at the final stage as a function of the weak scale (the Higgs expectation value) vh, and show that it becomes maximum around vh = {{O}} (300 GeV) when the dimensionless couplings in the SM, i.e., the Higgs self-coupling, the gauge couplings, and the Yukawa couplings are fixed. Roughly speaking, we find that the weak scale is given by vh ˜ T_{BBN}2 / (M_{pl}ye5), where ye is the Yukawa coupling of electron, T_BBN is the temperature at which the Big Bang nucleosynthesis starts, and M_pl is the Planck mass.
Global characterization of the Holocene Thermal Maximum
Renssen, H.; Seppä, H.; Crosta, X.; Goosse, H.; Roche, D.M.V.A.P.
2012-01-01
We analyze the global variations in the timing and magnitude of the Holocene Thermal Maximum (HTM) and their dependence on various forcings in transient simulations covering the last 9000 years (9 ka), performed with a global atmosphere-ocean-vegetation model. In these experiments, we consider the i
Instance Optimality of the Adaptive Maximum Strategy
L. Diening; C. Kreuzer; R. Stevenson
2016-01-01
In this paper, we prove that the standard adaptive finite element method with a (modified) maximum marking strategy is instance optimal for the total error, being the square root of the squared energy error plus the squared oscillation. This result will be derived in the model setting of Poisson’s e
Maximum phonation time: variability and reliability.
Speyer, Renée; Bogaardt, Hans C A; Passos, Valéria Lima; Roodenburg, Nel P H D; Zumach, Anne; Heijnen, Mariëlle A M; Baijens, Laura W J; Fleskens, Stijn J H M; Brunings, Jan W
2010-05-01
The objective of the study was to determine maximum phonation time reliability as a function of the number of trials, days, and raters in dysphonic and control subjects. Two groups of adult subjects participated in this reliability study: a group of outpatients with functional or organic dysphonia versus a group of healthy control subjects matched by age and gender. Over a period of maximally 6 weeks, three video recordings were made of five subjects' maximum phonation time trials. A panel of five experts were responsible for all measurements, including a repeated measurement of the subjects' first recordings. Patients showed significantly shorter maximum phonation times compared with healthy controls (on average, 6.6 seconds shorter). The averaged interclass correlation coefficient (ICC) over all raters per trial for the first day was 0.998. The averaged reliability coefficient per rater and per trial for repeated measurements of the first day's data was 0.997, indicating high intrarater reliability. The mean reliability coefficient per day for one trial was 0.939. When using five trials, the reliability increased to 0.987. The reliability over five trials for a single day was 0.836; for 2 days, 0.911; and for 3 days, 0.935. To conclude, the maximum phonation time has proven to be a highly reliable measure in voice assessment. A single rater is sufficient to provide highly reliable measurements.
Maximum Phonation Time: Variability and Reliability
R. Speyer; H.C.A. Bogaardt; V.L. Passos; N.P.H.D. Roodenburg; A. Zumach; M.A.M. Heijnen; L.W.J. Baijens; S.J.H.M. Fleskens; J.W. Brunings
2010-01-01
The objective of the study was to determine maximum phonation time reliability as a function of the number of trials, days, and raters in dysphonic and control subjects. Two groups of adult subjects participated in this reliability study: a group of outpatients with functional or organic dysphonia v
Maximum likelihood estimation of fractionally cointegrated systems
Lasak, Katarzyna
In this paper we consider a fractionally cointegrated error correction model and investigate asymptotic properties of the maximum likelihood (ML) estimators of the matrix of the cointe- gration relations, the degree of fractional cointegration, the matrix of the speed of adjustment...
Maximum likelihood estimation for integrated diffusion processes
Baltazar-Larios, Fernando; Sørensen, Michael
EM-algorithm to obtain maximum likelihood estimates of the parameters in the diffusion model. As part of the algorithm, we use a recent simple method for approximate simulation of diffusion bridges. In simulation studies for the Ornstein-Uhlenbeck process and the CIR process the proposed method works...
Maximum gain of Yagi-Uda arrays
Bojsen, J.H.; Schjær-Jacobsen, Hans; Nilsson, E.
1971-01-01
Numerical optimisation techniques have been used to find the maximum gain of some specific parasitic arrays. The gain of an array of infinitely thin, equispaced dipoles loaded with arbitrary reactances has been optimised. The results show that standard travelling-wave design methods are not optimum....... Yagi–Uda arrays with equal and unequal spacing have also been optimised with experimental verification....
Metabolic networks evolve towards states of maximum entropy production.
Unrean, Pornkamol; Srienc, Friedrich
2011-11-01
A metabolic network can be described by a set of elementary modes or pathways representing discrete metabolic states that support cell function. We have recently shown that in the most likely metabolic state the usage probability of individual elementary modes is distributed according to the Boltzmann distribution law while complying with the principle of maximum entropy production. To demonstrate that a metabolic network evolves towards such state we have carried out adaptive evolution experiments with Thermoanaerobacterium saccharolyticum operating with a reduced metabolic functionality based on a reduced set of elementary modes. In such reduced metabolic network metabolic fluxes can be conveniently computed from the measured metabolite secretion pattern. Over a time span of 300 generations the specific growth rate of the strain continuously increased together with a continuous increase in the rate of entropy production. We show that the rate of entropy production asymptotically approaches the maximum entropy production rate predicted from the state when the usage probability of individual elementary modes is distributed according to the Boltzmann distribution. Therefore, the outcome of evolution of a complex biological system can be predicted in highly quantitative terms using basic statistical mechanical principles.
Nissen, Nina Konstantin; Holm, Lotte; Baarts, Charlotte
2015-01-01
recruited by strategic sampling based on self-reported BMI 18.5-29.9 kg/m2 and socio-demographic factors. Inductive analysis was conducted. Results : Normal-weight and moderately overweight people have clear ideals for their body size. Despite being normal weight or close to this, they construct a variety...
Heyland, Mark; Trepczynski, Adam; Duda, Georg N; Zehn, Manfred; Schaser, Klaus-Dieter; Märdian, Sven
2015-12-01
Selection of boundary constraints may influence amount and distribution of loads. The purpose of this study is to analyze the potential of inertia relief and follower load to maintain the effects of musculoskeletal loads even under large deflections in patient specific finite element models of intact or fractured bone compared to empiric boundary constraints which have been shown to lead to physiological displacements and surface strains. The goal is to elucidate the use of boundary conditions in strain analyses of bones. Finite element models of the intact femur and a model of clinically relevant fracture stabilization by locking plate fixation were analyzed with normal walking loading conditions for different boundary conditions, specifically re-balanced loading, inertia relief and follower load. Peak principal cortex surface strains for different boundary conditions are consistent (maximum deviation 13.7%) except for inertia relief without force balancing (maximum deviation 108.4%). Influence of follower load on displacements increases with higher deflection in fracture model (from 3% to 7% for force balanced model). For load balanced models, follower load had only minor influence, though the effect increases strongly with higher deflection. Conventional constraints of fixed nodes in space should be carefully reconsidered because their type and position are challenging to justify and for their potential to introduce relevant non-physiological reaction forces. Inertia relief provides an alternative method which yields physiological strain results.
On a robust and efficient maximum depth estimator
ZUO YiJun; LAI ShaoYong
2009-01-01
The best breakdown point robustness is one of the most outstanding features of the univariate median. For this robustness property, the median, however, has to pay the price of a low efficiency at normal and other light-tailed models. Affine equivariant multivariate analogues of the univariate median with high breakdown points were constructed in the past two decades. For the high breakdown robustness, most of them also have to sacrifice their efficiency at normal and other models,nevertheless. The affine equivariant maximum depth estimator proposed and studied in this paper turns out to be an exception. Like the univariate median, it also possesses a highest breakdown point among all its multivariate competitors. Unlike the univariate median, it is also highly efficient relative to the sample mean at normal and various other distributions, overcoming the vital low-efficiency shortcoming of the univariate and other multivariate generalized medians. The paper also studies the asymptotics of the estimator and establishes its limit distribution without symmetry and other strong assumptions that are typically imposed on the underlying distribution.
METHOD FOR CALCULATION OF STRESS-STRAIN STATE DUE TO SINGLE TWIN IN GRAIN OF VARIOUS FORMS
T. V. Drabysheuskaya
2016-01-01
Full Text Available The paper investigates a stress-strain state in a polycrystalline grain due to presence in its body of a single micro- twin in case of various grain boundary forms. A methodology for calculation of displacement and stress fields for the specified stress-strain state of a polygon-shaped grain has been developed in the paper. Nodal points in a polycrystalline grain that have a maximum stresses contributing to initiation of destruction have been revealed in the paper. The aim of this work has been to study the stress-strain state due to a single micro-twin in the polycrystalline grain and form of grain boundaries. The paper describes polycrystalline grains having a regular polygon shape and containing a single wedge twin in their body. Polycrystalline grain boundaries are presented as walls with complete dislocation. The investigated grains are located far from the surface of twinning material. The developed methodology for calculation of displacement and stresses created by wedge twin is based on the principle of superposition. Calculations on stress tensor components have been carried out for iron (Fe. The presented results of calculations for stress fields have indicated to validity of the used dislocation model. Twin and grain boundaries being stress concentrators are clearly visible on the obtained distributions of stress fields. Maximum normal stresses are observed on the twin boundaries; σxy maximum shear stresses are located at nodal points of the twin; σzy and σxz shear stresses are maximum on the grain boundaries. The conducted investigations have resulted in study of the stress-strain state due to a single wedge-shaped micro-twin in the polycrystalline grain and form of the grain boundaries. Zones of stress concentration in the polycrystalline grain have been identified in the presence of residual mechanical wedge twin. A method for evaluation of the given state has been developed in the paper.
Malakan Rad, Elaheh; Zeinaloo, Ali Akbar
2013-04-01
We report postoperative normalization of left ventricular noncompaction in a neonate undergoing successful neonatal surgery for type II aorta to left ventricular tunnel (ALVT) associated with a large patent ductus arteriosus, floppy and extremely redundant anterior mitral leaflet, right coronary artery arising directly from the tunnel, and severe left ventricular noncompaction. We also described 2 novel echocardiographic findings in ALVT including "triple wavy line sign" on M-mode echocardiography which disappeared 1 month after operation and "abnormally increased left ventricular posterior wall motion" on M-mode of standard parasternal long-axis view on color tissue Doppler imaging (TDI) that also normalized postoperatively. We showed that proper definition of endocardial border is extremely important in strain and strain rate imaging in the context of left ventricular noncompaction. Preoperative longitudinal strain and strain rate were significantly decreased in comparison to radial strain and strain rate. Circumferential strain and strain rate were normal. © 2013, Wiley Periodicals, Inc.
Model Selection Through Sparse Maximum Likelihood Estimation
Banerjee, Onureena; D'Aspremont, Alexandre
2007-01-01
We consider the problem of estimating the parameters of a Gaussian or binary distribution in such a way that the resulting undirected graphical model is sparse. Our approach is to solve a maximum likelihood problem with an added l_1-norm penalty term. The problem as formulated is convex but the memory requirements and complexity of existing interior point methods are prohibitive for problems with more than tens of nodes. We present two new algorithms for solving problems with at least a thousand nodes in the Gaussian case. Our first algorithm uses block coordinate descent, and can be interpreted as recursive l_1-norm penalized regression. Our second algorithm, based on Nesterov's first order method, yields a complexity estimate with a better dependence on problem size than existing interior point methods. Using a log determinant relaxation of the log partition function (Wainwright & Jordan (2006)), we show that these same algorithms can be used to solve an approximate sparse maximum likelihood problem for...
Maximum-entropy description of animal movement.
Fleming, Chris H; Subaşı, Yiğit; Calabrese, Justin M
2015-03-01
We introduce a class of maximum-entropy states that naturally includes within it all of the major continuous-time stochastic processes that have been applied to animal movement, including Brownian motion, Ornstein-Uhlenbeck motion, integrated Ornstein-Uhlenbeck motion, a recently discovered hybrid of the previous models, and a new model that describes central-place foraging. We are also able to predict a further hierarchy of new models that will emerge as data quality improves to better resolve the underlying continuity of animal movement. Finally, we also show that Langevin equations must obey a fluctuation-dissipation theorem to generate processes that fall from this class of maximum-entropy distributions when the constraints are purely kinematic.
Pareto versus lognormal: a maximum entropy test.
Bee, Marco; Riccaboni, Massimo; Schiavo, Stefano
2011-08-01
It is commonly found that distributions that seem to be lognormal over a broad range change to a power-law (Pareto) distribution for the last few percentiles. The distributions of many physical, natural, and social events (earthquake size, species abundance, income and wealth, as well as file, city, and firm sizes) display this structure. We present a test for the occurrence of power-law tails in statistical distributions based on maximum entropy. This methodology allows one to identify the true data-generating processes even in the case when it is neither lognormal nor Pareto. The maximum entropy approach is then compared with other widely used methods and applied to different levels of aggregation of complex systems. Our results provide support for the theory that distributions with lognormal body and Pareto tail can be generated as mixtures of lognormally distributed units.
Maximum Variance Hashing via Column Generation
Lei Luo
2013-01-01
item search. Recently, a number of data-dependent methods have been developed, reflecting the great potential of learning for hashing. Inspired by the classic nonlinear dimensionality reduction algorithm—maximum variance unfolding, we propose a novel unsupervised hashing method, named maximum variance hashing, in this work. The idea is to maximize the total variance of the hash codes while preserving the local structure of the training data. To solve the derived optimization problem, we propose a column generation algorithm, which directly learns the binary-valued hash functions. We then extend it using anchor graphs to reduce the computational cost. Experiments on large-scale image datasets demonstrate that the proposed method outperforms state-of-the-art hashing methods in many cases.
The Maximum Resource Bin Packing Problem
Boyar, J.; Epstein, L.; Favrholdt, L.M.
2006-01-01
algorithms, First-Fit-Increasing and First-Fit-Decreasing for the maximum resource variant of classical bin packing. For the on-line variant, we define maximum resource variants of classical and dual bin packing. For dual bin packing, no on-line algorithm is competitive. For classical bin packing, we find......Usually, for bin packing problems, we try to minimize the number of bins used or in the case of the dual bin packing problem, maximize the number or total size of accepted items. This paper presents results for the opposite problems, where we would like to maximize the number of bins used...... the competitive ratio of various natural algorithms. We study the general versions of the problems as well as the parameterized versions where there is an upper bound of on the item sizes, for some integer k....
Nonparametric Maximum Entropy Estimation on Information Diagrams
Martin, Elliot A; Meinke, Alexander; Děchtěrenko, Filip; Davidsen, Jörn
2016-01-01
Maximum entropy estimation is of broad interest for inferring properties of systems across many different disciplines. In this work, we significantly extend a technique we previously introduced for estimating the maximum entropy of a set of random discrete variables when conditioning on bivariate mutual informations and univariate entropies. Specifically, we show how to apply the concept to continuous random variables and vastly expand the types of information-theoretic quantities one can condition on. This allows us to establish a number of significant advantages of our approach over existing ones. Not only does our method perform favorably in the undersampled regime, where existing methods fail, but it also can be dramatically less computationally expensive as the cardinality of the variables increases. In addition, we propose a nonparametric formulation of connected informations and give an illustrative example showing how this agrees with the existing parametric formulation in cases of interest. We furthe...
Zipf's law, power laws and maximum entropy
Visser, Matt
2013-04-01
Zipf's law, and power laws in general, have attracted and continue to attract considerable attention in a wide variety of disciplines—from astronomy to demographics to software structure to economics to linguistics to zoology, and even warfare. A recent model of random group formation (RGF) attempts a general explanation of such phenomena based on Jaynes' notion of maximum entropy applied to a particular choice of cost function. In the present paper I argue that the specific cost function used in the RGF model is in fact unnecessarily complicated, and that power laws can be obtained in a much simpler way by applying maximum entropy ideas directly to the Shannon entropy subject only to a single constraint: that the average of the logarithm of the observable quantity is specified.
Zipf's law, power laws, and maximum entropy
Visser, Matt
2012-01-01
Zipf's law, and power laws in general, have attracted and continue to attract considerable attention in a wide variety of disciplines - from astronomy to demographics to economics to linguistics to zoology, and even warfare. A recent model of random group formation [RGF] attempts a general explanation of such phenomena based on Jaynes' notion of maximum entropy applied to a particular choice of cost function. In the present article I argue that the cost function used in the RGF model is in fact unnecessarily complicated, and that power laws can be obtained in a much simpler way by applying maximum entropy ideas directly to the Shannon entropy subject only to a single constraint: that the average of the logarithm of the observable quantity is specified.
Regions of constrained maximum likelihood parameter identifiability
Lee, C.-H.; Herget, C. J.
1975-01-01
This paper considers the parameter identification problem of general discrete-time, nonlinear, multiple-input/multiple-output dynamic systems with Gaussian-white distributed measurement errors. Knowledge of the system parameterization is assumed to be known. Regions of constrained maximum likelihood (CML) parameter identifiability are established. A computation procedure employing interval arithmetic is proposed for finding explicit regions of parameter identifiability for the case of linear systems. It is shown that if the vector of true parameters is locally CML identifiable, then with probability one, the vector of true parameters is a unique maximal point of the maximum likelihood function in the region of parameter identifiability and the CML estimation sequence will converge to the true parameters.
A Maximum Radius for Habitable Planets.
Alibert, Yann
2015-09-01
We compute the maximum radius a planet can have in order to fulfill two constraints that are likely necessary conditions for habitability: 1- surface temperature and pressure compatible with the existence of liquid water, and 2- no ice layer at the bottom of a putative global ocean, that would prevent the operation of the geologic carbon cycle to operate. We demonstrate that, above a given radius, these two constraints cannot be met: in the Super-Earth mass range (1-12 Mearth), the overall maximum that a planet can have varies between 1.8 and 2.3 Rearth. This radius is reduced when considering planets with higher Fe/Si ratios, and taking into account irradiation effects on the structure of the gas envelope.
Strain-based fatigue data for Ti-6Al-4V ELI under fully-reversed and mean strain loads.
Carrion, Patricio E; Shamsaei, Nima
2016-06-01
This article presents the experimental data supporting the study to obtain the mean strain/stress effects on the fatigue behavior of Ti-6Al-4V ELI. A series of strain-controlled fatigue experiments on Ti-6Al-4V ELI were performed at four strain ratios (-1, -0.5, 0, and 0.5). Two types of data are included for each specimen. These are the hysteresis stress-strain responses for the cycle in a log10 increment, and the maximum and minimum stress-strain responses for each cycle. Fatigue lives are also reported for all the experiments.
Strain-based fatigue data for Ti–6Al–4V ELI under fully-reversed and mean strain loads
Carrion, Patricio E.; Shamsaei, Nima
2016-01-01
This article presents the experimental data supporting the study to obtain the mean strain/stress effects on the fatigue behavior of Ti–6Al–4V ELI. A series of strain-controlled fatigue experiments on Ti–6Al–4V ELI were performed at four strain ratios (−1, −0.5, 0, and 0.5). Two types of data are included for each specimen. These are the hysteresis stress–strain responses for the cycle in a log10 increment, and the maximum and minimum stress–strain responses for each cycle. Fatigue lives are also reported for all the experiments. PMID:26952022
Strain-based fatigue data for Ti–6Al–4V ELI under fully-reversed and mean strain loads
Patricio E. Carrion
2016-06-01
Full Text Available This article presents the experimental data supporting the study to obtain the mean strain/stress effects on the fatigue behavior of Ti–6Al–4V ELI. A series of strain-controlled fatigue experiments on Ti–6Al–4V ELI were performed at four strain ratios (−1, −0.5, 0, and 0.5. Two types of data are included for each specimen. These are the hysteresis stress–strain responses for the cycle in a log10 increment, and the maximum and minimum stress–strain responses for each cycle. Fatigue lives are also reported for all the experiments.
Maximum Profit Configurations of Commercial Engines
Yiran Chen
2011-01-01
An investigation of commercial engines with finite capacity low- and high-price economic subsystems and a generalized commodity transfer law [n ∝ Δ (P m)] in commodity flow processes, in which effects of the price elasticities of supply and demand are introduced, is presented in this paper. Optimal cycle configurations of commercial engines for maximum profit are obtained by applying optimal control theory. In some special cases, the eventual state—market equilibrium—is solely determined by t...
A stochastic maximum principle via Malliavin calculus
Øksendal, Bernt; Zhou, Xun Yu; Meyer-Brandis, Thilo
2008-01-01
This paper considers a controlled It\\^o-L\\'evy process where the information available to the controller is possibly less than the overall information. All the system coefficients and the objective performance functional are allowed to be random, possibly non-Markovian. Malliavin calculus is employed to derive a maximum principle for the optimal control of such a system where the adjoint process is explicitly expressed.
Tissue radiation response with maximum Tsallis entropy.
Sotolongo-Grau, O; Rodríguez-Pérez, D; Antoranz, J C; Sotolongo-Costa, Oscar
2010-10-08
The expression of survival factors for radiation damaged cells is currently based on probabilistic assumptions and experimentally fitted for each tumor, radiation, and conditions. Here, we show how the simplest of these radiobiological models can be derived from the maximum entropy principle of the classical Boltzmann-Gibbs expression. We extend this derivation using the Tsallis entropy and a cutoff hypothesis, motivated by clinical observations. The obtained expression shows a remarkable agreement with the experimental data found in the literature.
Maximum Estrada Index of Bicyclic Graphs
Wang, Long; Wang, Yi
2012-01-01
Let $G$ be a simple graph of order $n$, let $\\lambda_1(G),\\lambda_2(G),...,\\lambda_n(G)$ be the eigenvalues of the adjacency matrix of $G$. The Esrada index of $G$ is defined as $EE(G)=\\sum_{i=1}^{n}e^{\\lambda_i(G)}$. In this paper we determine the unique graph with maximum Estrada index among bicyclic graphs with fixed order.
Maximum privacy without coherence, zero-error
Leung, Debbie; Yu, Nengkun
2016-09-01
We study the possible difference between the quantum and the private capacities of a quantum channel in the zero-error setting. For a family of channels introduced by Leung et al. [Phys. Rev. Lett. 113, 030512 (2014)], we demonstrate an extreme difference: the zero-error quantum capacity is zero, whereas the zero-error private capacity is maximum given the quantum output dimension.
Quantifying strain variability in modeling growth of Listeria monocytogenes
Aryani, D.; Besten, den H.M.W.; Hazeleger, W.C.; Zwietering, M.H.
2015-01-01
Prediction of microbial growth kinetics can differ from the actual behavior of the target microorganisms. In the present study, the impact of strain variability on maximum specific growth rate (µmax) (h- 1) was quantified using twenty Listeria monocytogenes strains. The µmax was determined as functi
Anita Sadeghpour
2013-05-01
. Consequently suboptimal tracking of the endocardial border may be a problem with STE. Assessment of 2D strain by STE has been applied to both ventricles and atria. The articles published in this issue of the journal demonstrate the value of Strain and strain rate imaging in detecting the subclinical atrial and ventricular dysfunction, besides reporting the normal value of right atrium deformation indices. In all, first three articles of this journal, measurement of ventricular and atrial deformation indices have been considered as a feasible and reproducible technique. Assessment of atrial deformation profiles using Doppler-derived strain imaging and STE has been recently proposed as an alternative method of exploring atrial function (7. Nonetheless, some potential technical difficulties are noteworthy. STE is not completely angle independent, since ultrasound images normally have better resolution along the ultrasound beam compared with the perpendicular direction. Newly developed three-dimensional speckle tracking (3DT method has been suggested as a simple, feasible, and reproducible method to measure longitudinal, circumferential and radial strains. Similar to other 2D imaging techniques, 3DT relies on good image quality and the major pitfall of 3D STE is its dependency on image quality. Nevertheless, it still requires rigorous validation and testing (8-10.
Automatic maximum entropy spectral reconstruction in NMR.
Mobli, Mehdi; Maciejewski, Mark W; Gryk, Michael R; Hoch, Jeffrey C
2007-10-01
Developments in superconducting magnets, cryogenic probes, isotope labeling strategies, and sophisticated pulse sequences together have enabled the application, in principle, of high-resolution NMR spectroscopy to biomolecular systems approaching 1 megadalton. In practice, however, conventional approaches to NMR that utilize the fast Fourier transform, which require data collected at uniform time intervals, result in prohibitively lengthy data collection times in order to achieve the full resolution afforded by high field magnets. A variety of approaches that involve nonuniform sampling have been proposed, each utilizing a non-Fourier method of spectrum analysis. A very general non-Fourier method that is capable of utilizing data collected using any of the proposed nonuniform sampling strategies is maximum entropy reconstruction. A limiting factor in the adoption of maximum entropy reconstruction in NMR has been the need to specify non-intuitive parameters. Here we describe a fully automated system for maximum entropy reconstruction that requires no user-specified parameters. A web-accessible script generator provides the user interface to the system.
Maximum entropy analysis of cosmic ray composition
Nosek, Dalibor; Vícha, Jakub; Trávníček, Petr; Nosková, Jana
2016-01-01
We focus on the primary composition of cosmic rays with the highest energies that cause extensive air showers in the Earth's atmosphere. A way of examining the two lowest order moments of the sample distribution of the depth of shower maximum is presented. The aim is to show that useful information about the composition of the primary beam can be inferred with limited knowledge we have about processes underlying these observations. In order to describe how the moments of the depth of shower maximum depend on the type of primary particles and their energies, we utilize a superposition model. Using the principle of maximum entropy, we are able to determine what trends in the primary composition are consistent with the input data, while relying on a limited amount of information from shower physics. Some capabilities and limitations of the proposed method are discussed. In order to achieve a realistic description of the primary mass composition, we pay special attention to the choice of the parameters of the sup...
A Maximum Resonant Set of Polyomino Graphs
Zhang Heping
2016-05-01
Full Text Available A polyomino graph P is a connected finite subgraph of the infinite plane grid such that each finite face is surrounded by a regular square of side length one and each edge belongs to at least one square. A dimer covering of P corresponds to a perfect matching. Different dimer coverings can interact via an alternating cycle (or square with respect to them. A set of disjoint squares of P is a resonant set if P has a perfect matching M so that each one of those squares is M-alternating. In this paper, we show that if K is a maximum resonant set of P, then P − K has a unique perfect matching. We further prove that the maximum forcing number of a polyomino graph is equal to the cardinality of a maximum resonant set. This confirms a conjecture of Xu et al. [26]. We also show that if K is a maximal alternating set of P, then P − K has a unique perfect matching.
The maximum rate of mammal evolution
Evans, Alistair R.; Jones, David; Boyer, Alison G.; Brown, James H.; Costa, Daniel P.; Ernest, S. K. Morgan; Fitzgerald, Erich M. G.; Fortelius, Mikael; Gittleman, John L.; Hamilton, Marcus J.; Harding, Larisa E.; Lintulaakso, Kari; Lyons, S. Kathleen; Okie, Jordan G.; Saarinen, Juha J.; Sibly, Richard M.; Smith, Felisa A.; Stephens, Patrick R.; Theodor, Jessica M.; Uhen, Mark D.
2012-03-01
How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous-Paleogene (K-Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes.
Minimal Length, Friedmann Equations and Maximum Density
Awad, Adel
2014-01-01
Inspired by Jacobson's thermodynamic approach[gr-qc/9504004], Cai et al [hep-th/0501055,hep-th/0609128] have shown the emergence of Friedmann equations from the first law of thermodynamics. We extend Akbar--Cai derivation [hep-th/0609128] of Friedmann equations to accommodate a general entropy-area law. Studying the resulted Friedmann equations using a specific entropy-area law, which is motivated by the generalized uncertainty principle (GUP), reveals the existence of a maximum energy density closed to Planck density. Allowing for a general continuous pressure $p(\\rho,a)$ leads to bounded curvature invariants and a general nonsingular evolution. In this case, the maximum energy density is reached in a finite time and there is no cosmological evolution beyond this point which leaves the big bang singularity inaccessible from a spacetime prospective. The existence of maximum energy density and a general nonsingular evolution is independent of the equation of state and the spacial curvature $k$. As an example w...
Maximum saliency bias in binocular fusion
Lu, Yuhao; Stafford, Tom; Fox, Charles
2016-07-01
Subjective experience at any instant consists of a single ("unitary"), coherent interpretation of sense data rather than a "Bayesian blur" of alternatives. However, computation of Bayes-optimal actions has no role for unitary perception, instead being required to integrate over every possible action-percept pair to maximise expected utility. So what is the role of unitary coherent percepts, and how are they computed? Recent work provided objective evidence for non-Bayes-optimal, unitary coherent, perception and action in humans; and further suggested that the percept selected is not the maximum a posteriori percept but is instead affected by utility. The present study uses a binocular fusion task first to reproduce the same effect in a new domain, and second, to test multiple hypotheses about exactly how utility may affect the percept. After accounting for high experimental noise, it finds that both Bayes optimality (maximise expected utility) and the previously proposed maximum-utility hypothesis are outperformed in fitting the data by a modified maximum-salience hypothesis, using unsigned utility magnitudes in place of signed utilities in the bias function.
The maximum rate of mammal evolution
Evans, Alistair R.; Jones, David; Boyer, Alison G.; Brown, James H.; Costa, Daniel P.; Ernest, S. K. Morgan; Fitzgerald, Erich M. G.; Fortelius, Mikael; Gittleman, John L.; Hamilton, Marcus J.; Harding, Larisa E.; Lintulaakso, Kari; Lyons, S. Kathleen; Okie, Jordan G.; Saarinen, Juha J.; Sibly, Richard M.; Smith, Felisa A.; Stephens, Patrick R.; Theodor, Jessica M.; Uhen, Mark D.
2012-01-01
How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous–Paleogene (K–Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes. PMID:22308461
The maximum rate of mammal evolution.
Evans, Alistair R; Jones, David; Boyer, Alison G; Brown, James H; Costa, Daniel P; Ernest, S K Morgan; Fitzgerald, Erich M G; Fortelius, Mikael; Gittleman, John L; Hamilton, Marcus J; Harding, Larisa E; Lintulaakso, Kari; Lyons, S Kathleen; Okie, Jordan G; Saarinen, Juha J; Sibly, Richard M; Smith, Felisa A; Stephens, Patrick R; Theodor, Jessica M; Uhen, Mark D
2012-03-13
How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous-Paleogene (K-Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes.
ZHANG Wen-hua; PANG Xue-cheng
2006-01-01
This paper investigates the relationship between the normality and the shared values for a meromorphic function on the unit disc △.Based on Marty's normality criterion and through a detailed analysis of the meromorphic functions,it is shown that if for every f∈F,f and f(k) share a and b on △ and the zeros of f(z)-a are of multiplicity k≥3,then F is normal on △,where F is a family of meromorphic functions on the unit disc △,and a and b are distinct values.
YANG Li; QIU Qiong; ZHANG Hui-zhong; XIA Jin-xi
2007-01-01
Background Postsystolic shortening (PSS) has been proposed as a marker of myocardial dysfunction. Strain rate imaging (SRI)is a novel ultrasonic technique, allowing reliable and noninvasive measurement of myocardial deformation.The purpose of this study was to investigate the characteristics of myocardial longitudinal PSS by SRI in ischemic and infarct myocardium in patients with coronary artery disease, and to explore its clinical applicability.Methods Eleven patients with angina pectoris, 21 patients with myocardial infarction and 20 healthy subjects were included in the study. Apical four-, three- and two-chamber views were displayed; and septal, lateral, anteroseptal,posterior, anterior and inferior walls of the left ventricle were scanned, respectively. PSS strain (εpss), the ratio of εpss and systolic strain (εpss/εsys), the ratio of εpss and maximum strain (εpss/εmax) and the duration of PSS (Tpss) in ischemic, infarct and normal myocardium were analyzed.Results PSS was found more frequent in the ischemic and infarct segments compared with the normal segments (39%vs 22% and 56% vs 22%, respectively; both P＜0.01). It was even more frequent in the infarct segments than in the ischemic segments (56% vs 39%, P＜0.01). The absolute magnitude of εpss, εpss/εsys, εpss/εmax were significantly larger and Tpss significantly longer in the ischemic and infarct segments compared with that in the normal myocardium (P＜0.01).εpss/εsys, εpss/εmax were even larger and Tpss even longer in the infarct than in the ischemic segments (P＜0.01).Conclusions PSS is a common and important feature of the ischemic and infarct myocardium. εpss, εpss/εsys, εpss/εmax and Tpss as measured by SRI may be promising markers for the quantitative assessment of regional myocardial dysfunction in patients with coronary artery disease. εpss/εsys, εpss/εmax and Tpss may be helpful in differentiating infarct from ischemic myocardium.
2002-01-01
The Atlas of Stress-Strain Curves, Second Edition is substantially bigger in page dimensions, number of pages, and total number of curves than the previous edition. It contains over 1,400 curves, almost three times as many as in the 1987 edition. The curves are normalized in appearance to aid making comparisons among materials. All diagrams include metric (SI) units, and many also include U.S. customary units. All curves are captioned in a consistent format with valuable information including (as available) standard designation, the primary source of the curve, mechanical properties (including hardening exponent and strength coefficient), condition of sample, strain rate, test temperature, and alloy composition. Curve types include monotonic and cyclic stress-strain, isochronous stress-strain, and tangent modulus. Curves are logically arranged and indexed for fast retrieval of information. The book also includes an introduction that provides background information on methods of stress-strain determination, on...
Accurate Maximum Power Tracking in Photovoltaic Systems Affected by Partial Shading
Pierluigi Guerriero
2015-01-01
Full Text Available A maximum power tracking algorithm exploiting operating point information gained on individual solar panels is presented. The proposed algorithm recognizes the presence of multiple local maxima in the power voltage curve of a shaded solar field and evaluates the coordinated of the absolute maximum. The effectiveness of the proposed approach is evidenced by means of circuit level simulation and experimental results. Experiments evidenced that, in comparison with a standard perturb and observe algorithm, we achieve faster convergence in normal operating conditions (when the solar field is uniformly illuminated and we accurately locate the absolute maximum power point in partial shading conditions, thus avoiding the convergence on local maxima.
Hydrocephalus - occult; Hydrocephalus - idiopathic; Hydrocephalus - adult; Hydrocephalus - communicating; Dementia - hydrocephalus; NPH ... Ferri FF. Normal pressure hydrocephalus. In: Ferri FF, ed. ... Elsevier; 2016:chap 648. Rosenberg GA. Brain edema and disorders ...
Normality in analytical psychology.
Myers, Steve
2013-12-01
Although C.G. Jung's interest in normality wavered throughout his career, it was one of the areas he identified in later life as worthy of further research. He began his career using a definition of normality which would have been the target of Foucault's criticism, had Foucault chosen to review Jung's work. However, Jung then evolved his thinking to a standpoint that was more aligned to Foucault's own. Thereafter, the post Jungian concept of normality has remained relatively undeveloped by comparison with psychoanalysis and mainstream psychology. Jung's disjecta membra on the subject suggest that, in contemporary analytical psychology, too much focus is placed on the process of individuation to the neglect of applications that consider collective processes. Also, there is potential for useful research and development into the nature of conflict between individuals and societies, and how normal people typically develop in relation to the spectrum between individuation and collectivity.
... Spread the Word Shop AAP Find a Pediatrician Family Life Medical Home Family Dynamics Adoption & Foster Care ... Español Text Size Email Print Share Normal Functioning Family Page Content Article Body Is there any way ...
The Semiparametric Normal Variance-Mean Mixture Model
Korsholm, Lars
1997-01-01
We discuss the normal vairance-mean mixture model from a semi-parametric point of view, i.e. we let the mixing distribution belong to a non parametric family. The main results are consistency of the non parametric maximum likelihood estimat or in this case, and construction of an asymptotically...... normal and efficient estimator....
Idiopathic Normal Pressure Hydrocephalus
2016-01-01
Idiopathic normal pressure hydrocephalus (iNPH) is a potentially reversible neurodegenerative disease commonly characterized by a triad of dementia, gait, and urinary disturbance. Advancements in diagnosis and treatment have aided in properly identifying and improving symptoms in patients. However, a large proportion of iNPH patients remain either undiagnosed or misdiagnosed. Using PubMed search engine of keywords “normal pressure hydrocephalus,” “diagnosis,” “shunt treatment,” “biomarkers,” ...
Graphene spin diode: Strain-modulated spin rectification
Wang, Yunhua; Wang, B., E-mail: stslyl@mail.sysu.edu.cn, E-mail: wangbiao@mail.sysu.edu.cn [Sino-French Institute of Nuclear Engineering and Technology, School of Physics and Engineering, State Key Laboratory of Optoelectronic Materials and Technologies, Sun Yat-sen University, Guangzhou 510275 (China); Liu, Yulan, E-mail: stslyl@mail.sysu.edu.cn, E-mail: wangbiao@mail.sysu.edu.cn [School of Engineering, Sun Yat-sen University, Guangzhou 510275 (China)
2014-08-04
Strain effects on spin transport in a ferromagnetic/strained/normal graphene junction are explored theoretically. It is shown that the spin-resolved Fermi energy range can be controlled by the armchair direction strain because the strain-induced pseudomagnetic field suppresses the current. The spin rectification effect for the bias reversal occurs because of a combination of ferromagnetic exchange splitting and the broken spatial symmetry of the junction. In addition, the spin rectification performance can be tuned remarkably by manipulation of the strains. In view of this strain-modulated spin rectification effect, we propose that the graphene-based ferromagnetic/strained/normal junction can be used as a tunable spin diode.
Left atrial strain: a new predictor of thrombotic risk and successful electrical cardioversion
Cátia Costa
2016-06-01
Full Text Available Background: Left atrial deformation (LAD parameters are new markers of atrial structural remodelling that seem to be affected in atrial fibrillation (AF and atrial flutter (AFL. This study aimed to determine whether LAD can identify patients with a higher risk of thrombosis and unsuccessful electrical cardioversion (ECV. Methods: Retrospective study including 56 patients with AF or AFL undergoing ECV, with previous transthoracic (TTE and transoesophageal echocardiography (TEE studies. Echocardiographic parameters analysed were as follows: left ventricle function, left atrium (LA dimensions, LAD parameters (positive and negative strain peaks, left atrial appendage (LAA filling and emptying velocities and the presence of thrombi. Strain values were analysed according to thrombotic risk and success of ECV. Results: Lower mean values of peak-positive strain (PPS in patients with prothrombotic velocities (<25 cm/s and a higher incidence of thrombi in LAA were observed compared with those with normal velocities. Multivariate analysis revealed PPS normalised by LA maximum volume indexed by body surface area (BSA to be associated with prothrombotic risk (odds ratio 0.000 (95% CI: 0.000–0.243, P 0.017, regardless of CHADs2VASC score. Peak-negative strain normalised by LA volumes indexed by BSA were associated with unsuccessful ECV. Conclusions: Atrial deformation parameters identify AF and AFL patients with a high risk of thrombosis and unsuccessful ECV. Therefore, these new parameters should be included in anticoagulation management and rhythm vs rate control strategies.
Gaussian maximum likelihood and contextual classification algorithms for multicrop classification
Di Zenzo, Silvano; Bernstein, Ralph; Kolsky, Harwood G.; Degloria, Stephen D.
1987-01-01
The paper reviews some of the ways in which context has been handled in the remote-sensing literature, and additional possibilities are introduced. The problem of computing exhaustive and normalized class-membership probabilities from the likelihoods provided by the Gaussian maximum likelihood classifier (to be used as initial probability estimates to start relaxation) is discussed. An efficient implementation of probabilistic relaxation is proposed, suiting the needs of actual remote-sensing applications. A modified fuzzy-relaxation algorithm using generalized operations between fuzzy sets is presented. Combined use of the two relaxation algorithms is proposed to exploit context in multispectral classification of remotely sensed data. Results on both one artificially created image and one MSS data set are reported.
Maximum Power Point Tracking of Photovoltaic System Using Intelligent Controller
Swathy C.S
2013-04-01
Full Text Available Photovoltaic systems normally use a maximum power point tracking (MPPT technique to continuously give forth the highest probable power to the load when the temperature and solar irradiationchanges occur. This subdues the problem of mismatch between the given load and the solar array. The energy conservation principle is used to obtain small signal model and transfer function. A simulationwork handling with MPPT controller, a DC/DC boost converter feeding a load is achieved. PI controller and fuzzy logic controllers were used as the MPPT controller, which controls the dc/dc converter. Simulations and experimental results showed excellent performance and were used for comparing PI controller and fuzzy logic controller.
Maximum caliber inference and the stochastic Ising model
Cafaro, Carlo; Ali, Sean Alan
2016-11-01
We investigate the maximum caliber variational principle as an inference algorithm used to predict dynamical properties of complex nonequilibrium, stationary, statistical systems in the presence of incomplete information. Specifically, we maximize the path entropy over discrete time step trajectories subject to normalization, stationarity, and detailed balance constraints together with a path-dependent dynamical information constraint reflecting a given average global behavior of the complex system. A general expression for the transition probability values associated with the stationary random Markov processes describing the nonequilibrium stationary system is computed. By virtue of our analysis, we uncover that a convenient choice of the dynamical information constraint together with a perturbative asymptotic expansion with respect to its corresponding Lagrange multiplier of the general expression for the transition probability leads to a formal overlap with the well-known Glauber hyperbolic tangent rule for the transition probability for the stochastic Ising model in the limit of very high temperatures of the heat reservoir.
Maximum power operation of interacting molecular motors
Golubeva, Natalia; Imparato, Alberto
2013-01-01
We study the mechanical and thermodynamic properties of different traffic models for kinesin which are relevant in biological and experimental contexts. We find that motor-motor interactions play a fundamental role by enhancing the thermodynamic efficiency at maximum power of the motors......, as compared to the non-interacting system, in a wide range of biologically compatible scenarios. We furthermore consider the case where the motor-motor interaction directly affects the internal chemical cycle and investigate the effect on the system dynamics and thermodynamics....
Maximum a posteriori decoder for digital communications
Altes, Richard A. (Inventor)
1997-01-01
A system and method for decoding by identification of the most likely phase coded signal corresponding to received data. The present invention has particular application to communication with signals that experience spurious random phase perturbations. The generalized estimator-correlator uses a maximum a posteriori (MAP) estimator to generate phase estimates for correlation with incoming data samples and for correlation with mean phases indicative of unique hypothesized signals. The result is a MAP likelihood statistic for each hypothesized transmission, wherein the highest value statistic identifies the transmitted signal.
Kernel-based Maximum Entropy Clustering
JIANG Wei; QU Jiao; LI Benxi
2007-01-01
With the development of Support Vector Machine (SVM),the "kernel method" has been studied in a general way.In this paper,we present a novel Kernel-based Maximum Entropy Clustering algorithm (KMEC).By using mercer kernel functions,the proposed algorithm is firstly map the data from their original space to high dimensional space where the data are expected to be more separable,then perform MEC clustering in the feature space.The experimental results show that the proposed method has better performance in the non-hyperspherical and complex data structure.
The sun and heliosphere at solar maximum.
Smith, E J; Marsden, R G; Balogh, A; Gloeckler, G; Geiss, J; McComas, D J; McKibben, R B; MacDowall, R J; Lanzerotti, L J; Krupp, N; Krueger, H; Landgraf, M
2003-11-14
Recent Ulysses observations from the Sun's equator to the poles reveal fundamental properties of the three-dimensional heliosphere at the maximum in solar activity. The heliospheric magnetic field originates from a magnetic dipole oriented nearly perpendicular to, instead of nearly parallel to, the Sun's rotation axis. Magnetic fields, solar wind, and energetic charged particles from low-latitude sources reach all latitudes, including the polar caps. The very fast high-latitude wind and polar coronal holes disappear and reappear together. Solar wind speed continues to be inversely correlated with coronal temperature. The cosmic ray flux is reduced symmetrically at all latitudes.
Conductivity maximum in a charged colloidal suspension
Bastea, S
2009-01-27
Molecular dynamics simulations of a charged colloidal suspension in the salt-free regime show that the system exhibits an electrical conductivity maximum as a function of colloid charge. We attribute this behavior to two main competing effects: colloid effective charge saturation due to counterion 'condensation' and diffusion slowdown due to the relaxation effect. In agreement with previous observations, we also find that the effective transported charge is larger than the one determined by the Stern layer and suggest that it corresponds to the boundary fluid layer at the surface of the colloidal particles.
Maximum entropy signal restoration with linear programming
Mastin, G.A.; Hanson, R.J.
1988-05-01
Dantzig's bounded-variable method is used to express the maximum entropy restoration problem as a linear programming problem. This is done by approximating the nonlinear objective function with piecewise linear segments, then bounding the variables as a function of the number of segments used. The use of a linear programming approach allows equality constraints found in the traditional Lagrange multiplier method to be relaxed. A robust revised simplex algorithm is used to implement the restoration. Experimental results from 128- and 512-point signal restorations are presented.
COMPARISON BETWEEN FORMULAS OF MAXIMUM SHIP SQUAT
PETRU SERGIU SERBAN
2016-06-01
Full Text Available Ship squat is a combined effect of ship’s draft and trim increase due to ship motion in limited navigation conditions. Over time, researchers conducted tests on models and ships to find a mathematical formula that can define squat. Various forms of calculating squat can be found in the literature. Among those most commonly used are of Barrass, Millward, Eryuzlu or ICORELS. This paper presents a comparison between the squat formulas to see the differences between them and which one provides the most satisfactory results. In this respect a cargo ship at different speeds was considered as a model for maximum squat calculations in canal navigation conditions.
Multi-Channel Maximum Likelihood Pitch Estimation
Christensen, Mads Græsbøll
2012-01-01
In this paper, a method for multi-channel pitch estimation is proposed. The method is a maximum likelihood estimator and is based on a parametric model where the signals in the various channels share the same fundamental frequency but can have different amplitudes, phases, and noise characteristics....... This essentially means that the model allows for different conditions in the various channels, like different signal-to-noise ratios, microphone characteristics and reverberation. Moreover, the method does not assume that a certain array structure is used but rather relies on a more general model and is hence...
Maximum entropy PDF projection: A review
Baggenstoss, Paul M.
2017-06-01
We review maximum entropy (MaxEnt) PDF projection, a method with wide potential applications in statistical inference. The method constructs a sampling distribution for a high-dimensional vector x based on knowing the sampling distribution p(z) of a lower-dimensional feature z = T (x). Under mild conditions, the distribution p(x) having highest possible entropy among all distributions consistent with p(z) may be readily found. Furthermore, the MaxEnt p(x) may be sampled, making the approach useful in Monte Carlo methods. We review the theorem and present a case study in model order selection and classification for handwritten character recognition.
CORA: Emission Line Fitting with Maximum Likelihood
Ness, Jan-Uwe; Wichmann, Rainer
2011-12-01
CORA analyzes emission line spectra with low count numbers and fits them to a line using the maximum likelihood technique. CORA uses a rigorous application of Poisson statistics. From the assumption of Poissonian noise, the software derives the probability for a model of the emission line spectrum to represent the measured spectrum. The likelihood function is used as a criterion for optimizing the parameters of the theoretical spectrum and a fixed point equation is derived allowing an efficient way to obtain line fluxes. CORA has been applied to an X-ray spectrum with the Low Energy Transmission Grating Spectrometer (LETGS) on board the Chandra observatory.
Dynamical maximum entropy approach to flocking
Cavagna, Andrea; Giardina, Irene; Ginelli, Francesco; Mora, Thierry; Piovani, Duccio; Tavarone, Raffaele; Walczak, Aleksandra M.
2014-04-01
We derive a new method to infer from data the out-of-equilibrium alignment dynamics of collectively moving animal groups, by considering the maximum entropy model distribution consistent with temporal and spatial correlations of flight direction. When bird neighborhoods evolve rapidly, this dynamical inference correctly learns the parameters of the model, while a static one relying only on the spatial correlations fails. When neighbors change slowly and the detailed balance is satisfied, we recover the static procedure. We demonstrate the validity of the method on simulated data. The approach is applicable to other systems of active matter.
Maximum Temperature Detection System for Integrated Circuits
Frankiewicz, Maciej; Kos, Andrzej
2015-03-01
The paper describes structure and measurement results of the system detecting present maximum temperature on the surface of an integrated circuit. The system consists of the set of proportional to absolute temperature sensors, temperature processing path and a digital part designed in VHDL. Analogue parts of the circuit where designed with full-custom technique. The system is a part of temperature-controlled oscillator circuit - a power management system based on dynamic frequency scaling method. The oscillator cooperates with microprocessor dedicated for thermal experiments. The whole system is implemented in UMC CMOS 0.18 μm (1.8 V) technology.
Zipf's law and maximum sustainable growth
Malevergne, Y; Sornette, D
2010-01-01
Zipf's law states that the number of firms with size greater than S is inversely proportional to S. Most explanations start with Gibrat's rule of proportional growth but require additional constraints. We show that Gibrat's rule, at all firm levels, yields Zipf's law under a balance condition between the effective growth rate of incumbent firms (which includes their possible demise) and the growth rate of investments in entrant firms. Remarkably, Zipf's law is the signature of the long-term optimal allocation of resources that ensures the maximum sustainable growth rate of an economy.
Maximum mass, moment of inertia and compactness of relativistic stars
Breu, Cosima
2016-01-01
A number of recent works have highlighted that it is possible to express the properties of general-relativistic stellar equilibrium configurations in terms of functions that do not depend on the specific equation of state employed to describe matter at nuclear densities. These functions are normally referred to as "universal relations" and have been found to apply, within limits, both to static or stationary isolated stars, as well as to fully dynamical and merging binary systems. Further extending the idea that universal relations can be valid also away from stability, we show that a universal relation is exhibited also by equilibrium solutions that are not stable. In particular, the mass of rotating configurations on the turning-point line shows a universal behaviour when expressed in terms of the normalised Keplerian angular momentum. In turn, this allows us to compute the maximum mass allowed by uniform rotation, M_{max}, simply in terms of the maximum mass of the nonrotating configuration, M_{TOV}, findi...
NERO- a post-maximum supernova radiation transport code
Maurer, I.; Jerkstrand, A.; Mazzali, P. A.; Taubenberger, S.; Hachinger, S.; Kromer, M.; Sim, S.; Hillebrandt, W.
2011-12-01
The interpretation of supernova (SN) spectra is essential for deriving SN ejecta properties such as density and composition, which in turn can tell us about their progenitors and the explosion mechanism. A very large number of atomic processes are important for spectrum formation. Several tools for calculating SN spectra exist, but they mainly focus on the very early or late epochs. The intermediate phase, which requires a non-local thermodynamic equilibrium (NLTE) treatment of radiation transport has rarely been studied. In this paper, we present a new SN radiation transport code, NERO, which can look at those epochs. All the atomic processes are treated in full NLTE, under a steady-state assumption. This is a valid approach between roughly 50 and 500 days after the explosion depending on SN type. This covers the post-maximum photospheric and the early and the intermediate nebular phase. As a test, we compare NERO to the radiation transport code of Jerkstrand, Fransson & Kozma and to the nebular code of Mazzali et al. All three codes have been developed independently and a comparison provides a valuable opportunity to investigate their reliability. Currently, NERO is one-dimensional and can be used for predicting spectra of synthetic explosion models or for deriving SN properties by spectral modelling. To demonstrate this, we study the spectra of the 'normal' Type Ia supernova (SN Ia) 2005cf between 50 and 350 days after the explosion and identify most of the common SN Ia line features at post-maximum epochs.
Prediction Models on Distribution of Inherent Strains in T Type Welding Structure
Peng HE; Jicai FENG; Jiecai HAN; Yiyu QIAN
2003-01-01
A fundamental theory for the analysis of residual welding stresses and deformation based on the inherent strain distribution along the welded joint is introduced. The method of predicting maximum hardness Hv(y, z) and maximum inherent strain gmax is given
George Marsaglia
2006-05-01
Full Text Available This article extends and amplifies on results from a paper of over forty years ago. It provides software for evaluating the density and distribution functions of the ratio z/w for any two jointly normal variates z,w, and provides details on methods for transforming a general ratio z/w into a standard form, (a+x/(b+y , with x and y independent standard normal and a, b non-negative constants. It discusses handling general ratios when, in theory, none of the moments exist yet practical considerations suggest there should be approximations whose adequacy can be verified by means of the included software. These approximations show that many of the ratios of normal variates encountered in practice can themselves be taken as normally distributed. A practical rule is developed: If a < 2.256 and 4 < b then the ratio (a+x/(b+y is itself approximately normally distributed with mean μ = a/(1.01b − .2713 and variance 2 = (a2 + 1/(b2 + .108b − 3.795 − μ2.
George Marsaglia
2006-05-01
Full Text Available This article extends and amplifies on results from a paper of over forty years ago. It provides software for evaluating the density and distribution functions of the ratio z/w for any two jointly normal variates z,w, and provides details on methods for transforming a general ratio z/w into a standard form, (a+x/(b+y , with x and y independent standard normal and a, b non-negative constants. It discusses handling general ratios when, in theory, none of the moments exist yet practical considerations suggest there should be approximations whose adequacy can be verified by means of the included software. These approximations show that many of the ratios of normal variates encountered in practice can themselves be taken as normally distributed. A practical rule is developed: If a < 2.256 and 4 < b then the ratio (a+x/(b+y is itself approximately normally distributed with mean μ = a/(1.01b - .2713 and variance σ2 = (a2 + 1/(b2 + .108b - 3.795 μ2.
Accurate structural correlations from maximum likelihood superpositions.
Douglas L Theobald
2008-02-01
Full Text Available The cores of globular proteins are densely packed, resulting in complicated networks of structural interactions. These interactions in turn give rise to dynamic structural correlations over a wide range of time scales. Accurate analysis of these complex correlations is crucial for understanding biomolecular mechanisms and for relating structure to function. Here we report a highly accurate technique for inferring the major modes of structural correlation in macromolecules using likelihood-based statistical analysis of sets of structures. This method is generally applicable to any ensemble of related molecules, including families of nuclear magnetic resonance (NMR models, different crystal forms of a protein, and structural alignments of homologous proteins, as well as molecular dynamics trajectories. Dominant modes of structural correlation are determined using principal components analysis (PCA of the maximum likelihood estimate of the correlation matrix. The correlations we identify are inherently independent of the statistical uncertainty and dynamic heterogeneity associated with the structural coordinates. We additionally present an easily interpretable method ("PCA plots" for displaying these positional correlations by color-coding them onto a macromolecular structure. Maximum likelihood PCA of structural superpositions, and the structural PCA plots that illustrate the results, will facilitate the accurate determination of dynamic structural correlations analyzed in diverse fields of structural biology.
Maximum entropy production and the fluctuation theorem
Dewar, R C [Unite EPHYSE, INRA Centre de Bordeaux-Aquitaine, BP 81, 33883 Villenave d' Ornon Cedex (France)
2005-05-27
Recently the author used an information theoretical formulation of non-equilibrium statistical mechanics (MaxEnt) to derive the fluctuation theorem (FT) concerning the probability of second law violating phase-space paths. A less rigorous argument leading to the variational principle of maximum entropy production (MEP) was also given. Here a more rigorous and general mathematical derivation of MEP from MaxEnt is presented, and the relationship between MEP and the FT is thereby clarified. Specifically, it is shown that the FT allows a general orthogonality property of maximum information entropy to be extended to entropy production itself, from which MEP then follows. The new derivation highlights MEP and the FT as generic properties of MaxEnt probability distributions involving anti-symmetric constraints, independently of any physical interpretation. Physically, MEP applies to the entropy production of those macroscopic fluxes that are free to vary under the imposed constraints, and corresponds to selection of the most probable macroscopic flux configuration. In special cases MaxEnt also leads to various upper bound transport principles. The relationship between MaxEnt and previous theories of irreversible processes due to Onsager, Prigogine and Ziegler is also clarified in the light of these results. (letter to the editor)
Thermodynamic hardness and the maximum hardness principle
Franco-Pérez, Marco; Gázquez, José L.; Ayers, Paul W.; Vela, Alberto
2017-08-01
An alternative definition of hardness (called the thermodynamic hardness) within the grand canonical ensemble formalism is proposed in terms of the partial derivative of the electronic chemical potential with respect to the thermodynamic chemical potential of the reservoir, keeping the temperature and the external potential constant. This temperature dependent definition may be interpreted as a measure of the propensity of a system to go through a charge transfer process when it interacts with other species, and thus it keeps the philosophy of the original definition. When the derivative is expressed in terms of the three-state ensemble model, in the regime of low temperatures and up to temperatures of chemical interest, one finds that for zero fractional charge, the thermodynamic hardness is proportional to T-1(I -A ) , where I is the first ionization potential, A is the electron affinity, and T is the temperature. However, the thermodynamic hardness is nearly zero when the fractional charge is different from zero. Thus, through the present definition, one avoids the presence of the Dirac delta function. We show that the chemical hardness defined in this way provides meaningful and discernible information about the hardness properties of a chemical species exhibiting integer or a fractional average number of electrons, and this analysis allowed us to establish a link between the maximum possible value of the hardness here defined, with the minimum softness principle, showing that both principles are related to minimum fractional charge and maximum stability conditions.
Maximum Likelihood Analysis in the PEN Experiment
Lehman, Martin
2013-10-01
The experimental determination of the π+ -->e+ ν (γ) decay branching ratio currently provides the most accurate test of lepton universality. The PEN experiment at PSI, Switzerland, aims to improve the present world average experimental precision of 3 . 3 ×10-3 to 5 ×10-4 using a stopped beam approach. During runs in 2008-10, PEN has acquired over 2 ×107 πe 2 events. The experiment includes active beam detectors (degrader, mini TPC, target), central MWPC tracking with plastic scintillator hodoscopes, and a spherical pure CsI electromagnetic shower calorimeter. The final branching ratio will be calculated using a maximum likelihood analysis. This analysis assigns each event a probability for 5 processes (π+ -->e+ ν , π+ -->μ+ ν , decay-in-flight, pile-up, and hadronic events) using Monte Carlo verified probability distribution functions of our observables (energies, times, etc). A progress report on the PEN maximum likelihood analysis will be presented. Work supported by NSF grant PHY-0970013.
A numerical method for determining the strain rate intensity factor under plane strain conditions
Alexandrov, S.; Kuo, C.-Y.; Jeng, Y.-R.
2016-07-01
Using the classical model of rigid perfectly plastic solids, the strain rate intensity factor has been previously introduced as the coefficient of the leading singular term in a series expansion of the equivalent strain rate in the vicinity of maximum friction surfaces. Since then, many strain rate intensity factors have been determined by means of analytical and semi-analytical solutions. However, no attempt has been made to develop a numerical method for calculating the strain rate intensity factor. This paper presents such a method for planar flow. The method is based on the theory of characteristics. First, the strain rate intensity factor is derived in characteristic coordinates. Then, a standard numerical slip-line technique is supplemented with a procedure to calculate the strain rate intensity factor. The distribution of the strain rate intensity factor along the friction surface in compression of a layer between two parallel plates is determined. A high accuracy of this numerical solution for the strain rate intensity factor is confirmed by comparison with an analytic solution. It is shown that the distribution of the strain rate intensity factor is in general discontinuous.
Quintanilla-Terminel, Alejandra; Evans, Brian
2016-08-01
We combined the split cylinder technique with microfabrication technology to observe strain heterogeneities that were produced during high-pressure transient creep of Carrara marble. Samples were patterned with a custom-designed grid of markers spaced 10 µm apart and containing an embedded coordinate system. The microscale strain measurement (MSSM) technique described here allowed us to analyze the local strain distribution with unprecedented detail over large regions. The description of the strain field is a function of the area over which strain is being computed. The scale at which the strain field can be considered homogeneous can provide insight into the deformation processes taking place. At 400-500°C, when twinning production is prolific, we observe highly strained bands that span several grains. One possible cause for the multigrain bands is the need to relieve strain incompatibilities that result when twins impinge on neighboring grains. At 600-700°C, the strain fields are still quite heterogeneous, and local strain varies substantially within grains and near grain boundaries, but the multigrain slip bands are not present. Deformation is concentrated in much smaller areas within grains and along some grain boundaries. The disappearance of the multigrain slip bands occurs when the deformation conditions allow additional slip systems to be activated. At 600°C, when the total strain is varied from 0.11 to 0.36, the spatial scale of the heterogeneity does not vary, but there are increases in the standard deviation of the distribution of local strains normalized by the total strain; thus, we conclude that the microstructure does not achieve a steady state in this strain interval.
Normalized Information Distance
Vitanyi, Paul M B; Cilibrasi, Rudi L; Li, Ming
2008-01-01
The normalized information distance is a universal distance measure for objects of all kinds. It is based on Kolmogorov complexity and thus uncomputable, but there are ways to utilize it. First, compression algorithms can be used to approximate the Kolmogorov complexity if the objects have a string representation. Second, for names and abstract concepts, page count statistics from the World Wide Web can be used. These practical realizations of the normalized information distance can then be applied to machine learning tasks, expecially clustering, to perform feature-free and parameter-free data mining. This chapter discusses the theoretical foundations of the normalized information distance and both practical realizations. It presents numerous examples of successful real-world applications based on these distance measures, ranging from bioinformatics to music clustering to machine translation.
Normalization of satellite imagery
Kim, Hongsuk H.; Elman, Gregory C.
1990-01-01
Sets of Thematic Mapper (TM) imagery taken over the Washington, DC metropolitan area during the months of November, March and May were converted into a form of ground reflectance imagery. This conversion was accomplished by adjusting the incident sunlight and view angles and by applying a pixel-by-pixel correction for atmospheric effects. Seasonal color changes of the area can be better observed when such normalization is applied to space imagery taken in time series. In normalized imagery, the grey scale depicts variations in surface reflectance and tonal signature of multi-band color imagery can be directly interpreted for quantitative information of the target.
Lake Basin Fetch and Maximum Length/Width
Minnesota Department of Natural Resources — Linear features representing the Fetch, Maximum Length and Maximum Width of a lake basin. Fetch, maximum length and average width are calcuated from the lake polygon...
Obturator internus muscle strains
Caoimhe Byrne, MB BCh, BAO
2017-03-01
Full Text Available We report 2 cases of obturator internus muscle strains. The injuries occurred in young male athletes involved in kicking sports. Case 1 details an acute obturator internus muscle strain with associated adductor longus strain. Case 2 details an overuse injury of the bilateral obturator internus muscles. In each case, magnetic resonance imaging played a crucial role in accurate diagnosis.
Jie Li DING; Xi Ru CHEN
2006-01-01
For generalized linear models (GLM), in case the regressors are stochastic and have different distributions, the asymptotic properties of the maximum likelihood estimate (MLE)(β^)n of the parameters are studied. Under reasonable conditions, we prove the weak, strong consistency and asymptotic normality of(β^)n.
Marginal Maximum Likelihood Estimation of a Latent Variable Model with Interaction
Cudeck, Robert; Harring, Jeffrey R.; du Toit, Stephen H. C.
2009-01-01
There has been considerable interest in nonlinear latent variable models specifying interaction between latent variables. Although it seems to be only slightly more complex than linear regression without the interaction, the model that includes a product of latent variables cannot be estimated by maximum likelihood assuming normality.…
Bodaghi, M.; Damanpack, A. R.; Liao, W. H.
2016-07-01
The aim of this article is to develop a robust macroscopic bi-axial model to capture self-accommodation, martensitic transformation/orientation/reorientation, normal-shear deformation coupling and asymmetric/anisotropic strain generation in polycrystalline shape memory alloys. By considering the volume fraction of martensite and its preferred direction as scalar and directional internal variables, constitutive relations are derived to describe basic mechanisms of accommodation, transformation and orientation/reorientation of martensite variants. A new definition is introduced for maximum recoverable strain, which allows the model to capture the effects of tension-compression asymmetry and transformation anisotropy. Furthermore, the coupling effects between normal and shear deformation modes are considered by merging inelastic strain components together. By introducing a calibration approach, material and kinetic parameters of the model are recast in terms of common quantities that characterize a uniaxial phase kinetic diagram. The solution algorithm of the model is presented based on an elastic-predictor inelastic-corrector return mapping process. In order to explore and demonstrate capabilities of the proposed model, theoretical predictions are first compared with existing experimental results on uniaxial tension, compression, torsion and combined tension-torsion tests. Afterwards, experimental results of uniaxial tension, compression, pure bending and buckling tests on {{NiTi}} rods and tubes are replicated by implementing a finite element method along with the Newton-Raphson and Riks techniques to trace non-linear equilibrium path. A good qualitative and quantitative correlation is observed between numerical and experimental results, which verifies the accuracy of the model and the solution procedure.
Metabolic activities of Lactobacillus spp. strains isolated from kefir.
Yüksekdag, Zehra Nur; Beyath, Yavuz; Aslim, Belma
2004-06-01
A total of 21 strains of Lactobacillus species were isolated from Turkish kefir samples, in order to select the most suitable strains according to their metabolic activities including probiotic properties. As a result of the identification tests, 21 Lactobacillus isolates were identified as L. acidophilus (4%), L. helveticus (9%), L. brevis (9%), L. bulgaricus (14%), L. plantarum (14%), L. casei (19%) and L. lactis (28%). The amount of produced lactic acid, hydrogen peroxide, proteolytic activity, and acetaldehyde productions of Lactobacillus spp. were determined. Different amounts of lactic acid were produced by strains studies; however, lactic acid levels were 1.7-11.4 mg/mL. All strains produced hydrogen peroxide. L. bulgaricus Z14L strain showed no proteolytic activity, L. casei Z6L strain produced the maximum amount (0.16 mg/mL) of proteolytic activity. Acetaldehyde concentration produced in Lactobacillus strains ranged between 0.88-3.52 microg/mL.
Maximum entropy principle and texture formation
Arminjon, M; Arminjon, Mayeul; Imbault, Didier
2006-01-01
The macro-to-micro transition in a heterogeneous material is envisaged as the selection of a probability distribution by the Principle of Maximum Entropy (MAXENT). The material is made of constituents, e.g. given crystal orientations. Each constituent is itself made of a large number of elementary constituents. The relevant probability is the volume fraction of the elementary constituents that belong to a given constituent and undergo a given stimulus. Assuming only obvious constraints in MAXENT means describing a maximally disordered material. This is proved to have the same average stimulus in each constituent. By adding a constraint in MAXENT, a new model, potentially interesting e.g. for texture prediction, is obtained.
MLDS: Maximum Likelihood Difference Scaling in R
Kenneth Knoblauch
2008-01-01
Full Text Available The MLDS package in the R programming language can be used to estimate perceptual scales based on the results of psychophysical experiments using the method of difference scaling. In a difference scaling experiment, observers compare two supra-threshold differences (a,b and (c,d on each trial. The approach is based on a stochastic model of how the observer decides which perceptual difference (or interval (a,b or (c,d is greater, and the parameters of the model are estimated using a maximum likelihood criterion. We also propose a method to test the model by evaluating the self-consistency of the estimated scale. The package includes an example in which an observer judges the differences in correlation between scatterplots. The example may be readily adapted to estimate perceptual scales for arbitrary physical continua.
Maximum Profit Configurations of Commercial Engines
Yiran Chen
2011-06-01
Full Text Available An investigation of commercial engines with finite capacity low- and high-price economic subsystems and a generalized commodity transfer law [n ∝ Δ (P m] in commodity flow processes, in which effects of the price elasticities of supply and demand are introduced, is presented in this paper. Optimal cycle configurations of commercial engines for maximum profit are obtained by applying optimal control theory. In some special cases, the eventual state—market equilibrium—is solely determined by the initial conditions and the inherent characteristics of two subsystems; while the different ways of transfer affect the model in respects of the specific forms of the paths of prices and the instantaneous commodity flow, i.e., the optimal configuration.
Maximum Segment Sum, Monadically (distilled tutorial
Jeremy Gibbons
2011-09-01
Full Text Available The maximum segment sum problem is to compute, given a list of integers, the largest of the sums of the contiguous segments of that list. This problem specification maps directly onto a cubic-time algorithm; however, there is a very elegant linear-time solution too. The problem is a classic exercise in the mathematics of program construction, illustrating important principles such as calculational development, pointfree reasoning, algebraic structure, and datatype-genericity. Here, we take a sideways look at the datatype-generic version of the problem in terms of monadic functional programming, instead of the traditional relational approach; the presentation is tutorial in style, and leavened with exercises for the reader.
Maximum Information and Quantum Prediction Algorithms
McElwaine, J N
1997-01-01
This paper describes an algorithm for selecting a consistent set within the consistent histories approach to quantum mechanics and investigates its properties. The algorithm uses a maximum information principle to select from among the consistent sets formed by projections defined by the Schmidt decomposition. The algorithm unconditionally predicts the possible events in closed quantum systems and ascribes probabilities to these events. A simple spin model is described and a complete classification of all exactly consistent sets of histories formed from Schmidt projections in the model is proved. This result is used to show that for this example the algorithm selects a physically realistic set. Other tentative suggestions in the literature for set selection algorithms using ideas from information theory are discussed.
Maximum process problems in optimal control theory
Goran Peskir
2005-01-01
Full Text Available Given a standard Brownian motion (Btt≥0 and the equation of motion dXt=vtdt+2dBt, we set St=max0≤s≤tXs and consider the optimal control problem supvE(Sτ−Cτ, where c>0 and the supremum is taken over all admissible controls v satisfying vt∈[μ0,μ1] for all t up to τ=inf{t>0|Xt∉(ℓ0,ℓ1} with μ0g∗(St, where s↦g∗(s is a switching curve that is determined explicitly (as the unique solution to a nonlinear differential equation. The solution found demonstrates that the problem formulations based on a maximum functional can be successfully included in optimal control theory (calculus of variations in addition to the classic problem formulations due to Lagrange, Mayer, and Bolza.
Maximum Spectral Luminous Efficacy of White Light
Murphy, T W
2013-01-01
As lighting efficiency improves, it is useful to understand the theoretical limits to luminous efficacy for light that we perceive as white. Independent of the efficiency with which photons are generated, there exists a spectrally-imposed limit to the luminous efficacy of any source of photons. We find that, depending on the acceptable bandpass and---to a lesser extent---the color temperature of the light, the ideal white light source achieves a spectral luminous efficacy of 250--370 lm/W. This is consistent with previous calculations, but here we explore the maximum luminous efficacy as a function of photopic sensitivity threshold, color temperature, and color rendering index; deriving peak performance as a function of all three parameters. We also present example experimental spectra from a variety of light sources, quantifying the intrinsic efficacy of their spectral distributions.
Maximum entropy model for business cycle synchronization
Xi, Ning; Muneepeerakul, Rachata; Azaele, Sandro; Wang, Yougui
2014-11-01
The global economy is a complex dynamical system, whose cyclical fluctuations can mainly be characterized by simultaneous recessions or expansions of major economies. Thus, the researches on the synchronization phenomenon are key to understanding and controlling the dynamics of the global economy. Based on a pairwise maximum entropy model, we analyze the business cycle synchronization of the G7 economic system. We obtain a pairwise-interaction network, which exhibits certain clustering structure and accounts for 45% of the entire structure of the interactions within the G7 system. We also find that the pairwise interactions become increasingly inadequate in capturing the synchronization as the size of economic system grows. Thus, higher-order interactions must be taken into account when investigating behaviors of large economic systems.
Quantum gravity momentum representation and maximum energy
Moffat, J. W.
2016-11-01
We use the idea of the symmetry between the spacetime coordinates xμ and the energy-momentum pμ in quantum theory to construct a momentum space quantum gravity geometry with a metric sμν and a curvature tensor Pλ μνρ. For a closed maximally symmetric momentum space with a constant 3-curvature, the volume of the p-space admits a cutoff with an invariant maximum momentum a. A Wheeler-DeWitt-type wave equation is obtained in the momentum space representation. The vacuum energy density and the self-energy of a charged particle are shown to be finite, and modifications of the electromagnetic radiation density and the entropy density of a system of particles occur for high frequencies.
Video segmentation using Maximum Entropy Model
QIN Li-juan; ZHUANG Yue-ting; PAN Yun-he; WU Fei
2005-01-01
Detecting objects of interest from a video sequence is a fundamental and critical task in automated visual surveillance.Most current approaches only focus on discriminating moving objects by background subtraction whether or not the objects of interest can be moving or stationary. In this paper, we propose layers segmentation to detect both moving and stationary target objects from surveillance video. We extend the Maximum Entropy (ME) statistical model to segment layers with features, which are collected by constructing a codebook with a set of codewords for each pixel. We also indicate how the training models are used for the discrimination of target objects in surveillance video. Our experimental results are presented in terms of the success rate and the segmenting precision.
Normalized information distance
Vitányi, P.M.B.; Balbach, F.J.; Cilibrasi, R.L.; Li, M.; Emmert-Streib, F.; Dehmer, M.
2009-01-01
The normalized information distance is a universal distance measure for objects of all kinds. It is based on Kolmogorov complexity and thus uncomputable, but there are ways to utilize it. First, compression algorithms can be used to approximate the Kolmogorov complexity if the objects have a string
Normalized information distance
Vitányi, P.M.B.; Balbach, F.J.; Cilibrasi, R.L.; Li, M.
2008-01-01
The normalized information distance is a universal distance measure for objects of all kinds. It is based on Kolmogorov complexity and thus uncomputable, but there are ways to utilize it. First, compression algorithms can be used to approximate the Kolmogorov complexity if the objects have a string
Srinivasan, V. K.
2013-01-01
Given a parabola in the standard form y[superscript 2] = 4ax, corresponding to three points on the parabola, such that the normals at these three points P, Q, R concur at a point M = (h, k), the equation of the circumscribing circle through the three points P, Q, and R provides a tremendous opportunity to illustrate "The Art of Algebraic…
无
2009-01-01
Xinjiang officials speed up the investigation of July 5 riot suspects and restore social order Life in Urumqi has gone back to normal one month after the July 5 riot that killed nearly 200 people in the capital city of China’s northwestern
Normality in Analytical Psychology
Steve Myers
2013-11-01
Full Text Available Although C.G. Jung’s interest in normality wavered throughout his career, it was one of the areas he identified in later life as worthy of further research. He began his career using a definition of normality which would have been the target of Foucault’s criticism, had Foucault chosen to review Jung’s work. However, Jung then evolved his thinking to a standpoint that was more aligned to Foucault’s own. Thereafter, the post Jungian concept of normality has remained relatively undeveloped by comparison with psychoanalysis and mainstream psychology. Jung’s disjecta membra on the subject suggest that, in contemporary analytical psychology, too much focus is placed on the process of individuation to the neglect of applications that consider collective processes. Also, there is potential for useful research and development into the nature of conflict between individuals and societies, and how normal people typically develop in relation to the spectrum between individuation and collectivity.
Normal modal preferential consequence
Britz, K
2012-12-01
Full Text Available of necessitation holds for the corresponding consequence relations, as one would expect it to. We present a representation result for this tightened framework, and investigate appropriate notions of entailment in this context|normal entailment, and a rational...
Takeda, K.; Ochiai, H.; Takeuchi, S.
1985-01-01
Maximum snow water equivalence and snowcover distribution are estimated using several LANDSAT data taken in snowmelting season over a four year period. The test site is Okutadami-gawa Basin located in the central position of Tohoku-Kanto-Chubu District. The year to year normalization for snowmelt volume computation on the snow line is conducted by year to year correction of degree days using the snowcover percentage within the test basin obtained from LANDSAT data. The maximum snow water equivalent map in the test basin is generated based on the normalized snowmelt volume on the snow line extracted from four LANDSAT data taken in a different year. The snowcover distribution on an arbitrary day in snowmelting of 1982 is estimated from the maximum snow water equivalent map. The estimated snowcover is compared with the snowcover area extracted from NOAA-AVHRR data taken on the same day. The applicability of the snow estimation using LANDSAT data is discussed.
Quantitative XRD HW-IR plot for clay mineral domain size and lattice strain analyses
Wang, H. J.; Chen, D. Z.; Zhou, J.; Chen, T.; Wang, H.; Zhang, Z. Q.
2003-04-01
Based on integral-breadth method, the one of three basic XRD methods (Klug &Alexander, 1974), authors (2000) proposed a qualitative half width (HW)-intensity ratio (IR) plot for clay mineral domain size and lattice strain analyses. In this study, the quantitative HW-IR plot is further developed on the basis of i) the curve relation between the Voigt function and the Pearson VII function; ii) the relationship between the Kübler index and the Weaver index. By numerical simulating, it is derived a curve relation between shape indexes k of the Voigt function and u of the Pearson VII function. With this curve relation, k and u can be converted each other in an accuracy of ten thousandth and therefore the domain size and the lattice strain contributions can be precisely separated from an XRD peak according to Langford's (1978) formula. For micaceous minerals, the HW-IR plot requires only a pair of values of the Kübler index and the Weaver index from 1nm reflection. For other clay minerals, the plot needs a pair of values of the (00l) peak's half width and intensity ratio IR. IR is a ratio of peak maximum to the intensity at the position of maximum minus 0.422oΔ2Θ in CuKα radiation. This quantitative plot renders a mean dimension of clay particles perpendicular to the reflection plane (00l) and an approximate upper limit strain normal to d001. The accuracy for domain size analysis reaches one tenth of nanometre and that for the lattice strain analysis is in ten thousandth respectively. This plot method can be widely used with any digital X-ray diffractometer, whose XRD data can be converted into text format. Excel 5.0 or latter versions in both English and Chinese can well support the HW-IR plot. This study was supported by NNSFC (Grant No 40272022)
Parallel Microcracks-based Ultrasensitive and Highly Stretchable Strain Sensors.
Amjadi, Morteza; Turan, Mehmet; Clementson, Cameron P; Sitti, Metin
2016-03-01
There is an increasing demand for flexible, skin-attachable, and wearable strain sensors due to their various potential applications. However, achieving strain sensors with both high sensitivity and high stretchability is still a grand challenge. Here, we propose highly sensitive and stretchable strain sensors based on the reversible microcrack formation in composite thin films. Controllable parallel microcracks are generated in graphite thin films coated on elastomer films. Sensors made of graphite thin films with short microcracks possess high gauge factors (maximum value of 522.6) and stretchability (ε ≥ 50%), whereas sensors with long microcracks show ultrahigh sensitivity (maximum value of 11,344) with limited stretchability (ε ≤ 50%). We demonstrate the high performance strain sensing of our sensors in both small and large strain sensing applications such as human physiological activity recognition, human body large motion capturing, vibration detection, pressure sensing, and soft robotics.
Statokinesigram normalization method.
de Oliveira, José Magalhães
2017-02-01
Stabilometry is a technique that aims to study the body sway of human subjects, employing a force platform. The signal obtained from this technique refers to the position of the foot base ground-reaction vector, known as the center of pressure (CoP). The parameters calculated from the signal are used to quantify the displacement of the CoP over time; there is a large variability, both between and within subjects, which prevents the definition of normative values. The intersubject variability is related to differences between subjects in terms of their anthropometry, in conjunction with their muscle activation patterns (biomechanics); and the intrasubject variability can be caused by a learning effect or fatigue. Age and foot placement on the platform are also known to influence variability. Normalization is the main method used to decrease this variability and to bring distributions of adjusted values into alignment. In 1996, O'Malley proposed three normalization techniques to eliminate the effect of age and anthropometric factors from temporal-distance parameters of gait. These techniques were adopted to normalize the stabilometric signal by some authors. This paper proposes a new method of normalization of stabilometric signals to be applied in balance studies. The method was applied to a data set collected in a previous study, and the results of normalized and nonnormalized signals were compared. The results showed that the new method, if used in a well-designed experiment, can eliminate undesirable correlations between the analyzed parameters and the subjects' characteristics and show only the experimental conditions' effects.
Evaluation of pliers' grip spans in the maximum gripping task and sub-maximum cutting task.
Kim, Dae-Min; Kong, Yong-Ku
2016-12-01
A total of 25 males participated to investigate the effects of the grip spans of pliers on the total grip force, individual finger forces and muscle activities in the maximum gripping task and wire-cutting tasks. In the maximum gripping task, results showed that the 50-mm grip span had significantly higher total grip strength than the other grip spans. In the cutting task, the 50-mm grip span also showed significantly higher grip strength than the 65-mm and 80-mm grip spans, whereas the muscle activities showed a higher value at 80-mm grip span. The ratios of cutting force to maximum grip strength were also investigated. Ratios of 30.3%, 31.3% and 41.3% were obtained by grip spans of 50-mm, 65-mm, and 80-mm, respectively. Thus, the 50-mm grip span for pliers might be recommended to provide maximum exertion in gripping tasks, as well as lower maximum-cutting force ratios in the cutting tasks.
Cosmic shear measurement with maximum likelihood and maximum a posteriori inference
Hall, Alex
2016-01-01
We investigate the problem of noise bias in maximum likelihood and maximum a posteriori estimators for cosmic shear. We derive the leading and next-to-leading order biases and compute them in the context of galaxy ellipticity measurements, extending previous work on maximum likelihood inference for weak lensing. We show that a large part of the bias on these point estimators can be removed using information already contained in the likelihood when a galaxy model is specified, without the need for external calibration. We test these bias-corrected estimators on simulated galaxy images similar to those expected from planned space-based weak lensing surveys, with very promising results. We find that the introduction of an intrinsic shape prior mitigates noise bias, such that the maximum a posteriori estimate can be made less biased than the maximum likelihood estimate. Second-order terms offer a check on the convergence of the estimators, but are largely sub-dominant. We show how biases propagate to shear estima...
2016-01-01
The invention relates to a strain gauge of a carrier layer and a meandering measurement grid positioned on the carrier layer, wherein the strain gauge comprises two reinforcement members positioned on the carrier layer at opposite ends of the measurement grid in the axial direction....... The reinforcement members are each placed within a certain axial distance to the measurement grid with the axial distance being equal to or smaller than a factor times the grid spacing. The invention further relates to a multi-axial strain gauge such as a bi-axial strain gauge or a strain gauge rosette where each...... of the strain gauges comprises reinforcement members. The invention further relates to a method for manufacturing a strain gauge as mentioned above....
Ground movement at Somma-Vesuvius from Last Glacial Maximum
Marturano, Aldo; Aiello, Giuseppe; Barra, Diana; Fedele, Lorenzo; Morra, Vincenzo
2012-01-01
Detailed micropalaeontological and petrochemical analyses of rock samples from two boreholes drilled at the archaeological excavations of Herculaneum, ~ 7 km west of the Somma -Vesuvius crater, allowed reconstruction of the Late Quaternary palaeoenvironmental evolution of the site. The data provide clear evidence for ground uplift movements involving the studied area. The Holocenic sedimentary sequence on which the archaeological remains of Herculaneum rest has risen several meters at an average rate of ~ 4 mm/yr. The uplift has involved the western apron of the volcano and the Sebeto-Volla Plain, a populous area including the eastern suburbs of Naples. This is consistent with earlier evidence for similar uplift for the areas of Pompeii and Sarno valley (SE of the volcano) and the Somma -Vesuvius eastern apron. An axisimmetric deep source of strain is considered responsible for the long-term uplift affecting the whole Somma -Vesuvius edifice. The deformation pattern can be modeled as a single pressure source, sited in the lower crust and surrounded by a shell of Maxwell viscoelastic medium, which experienced a pressure pulse that began at the Last Glacial Maximum.
Longitudinal growth strains in five clones of Eucalyptus tereticornis Sm.
Pankaj Aggarwal; Shakti Chauhan
2013-01-01
We studied the variability in longitudinal growth strains and wood basic density in five-year old trees from five clones (one tree per clone) of Eucalyptus tereticornis.Mean longitudinal growth strain in clones ranged from 466 to 876 μm.There was a significant difference between clones in growth strains and wood basic density.Clone 10 exhibited maximum growth strains and basic density,whereas clone 3 and clone 7 exhibited minimum growth strains and basic density,respectively.Within a tree,the growth strain variation with tree height was high but statistically insignificant while within tree variation in basic density was very small.There was no specific trend in variation in either strain or density within a tree.There was 5％-200％ difference in growth strain on opposite sides of the logs.However two strains showed a strong positive correlation.There was a moderate positive association of wood basic density and mean growth strains in logs.The variation around the periphery emphasize the need to measure strain more than one,preferably on opposite sides at the same height,on a tree to know the mean strain level for the purpose of selection of clones.
Idiopathic Normal Pressure Hydrocephalus
Basant R. Nassar BS
2016-04-01
Full Text Available Idiopathic normal pressure hydrocephalus (iNPH is a potentially reversible neurodegenerative disease commonly characterized by a triad of dementia, gait, and urinary disturbance. Advancements in diagnosis and treatment have aided in properly identifying and improving symptoms in patients. However, a large proportion of iNPH patients remain either undiagnosed or misdiagnosed. Using PubMed search engine of keywords “normal pressure hydrocephalus,” “diagnosis,” “shunt treatment,” “biomarkers,” “gait disturbances,” “cognitive function,” “neuropsychology,” “imaging,” and “pathogenesis,” articles were obtained for this review. The majority of the articles were retrieved from the past 10 years. The purpose of this review article is to aid general practitioners in further understanding current findings on the pathogenesis, diagnosis, and treatment of iNPH.
Idiopathic Normal Pressure Hydrocephalus
Basant R. Nassar BS
2016-04-01
Full Text Available Idiopathic normal pressure hydrocephalus (iNPH is a potentially reversible neurodegenerative disease commonly characterized by a triad of dementia, gait, and urinary disturbance. Advancements in diagnosis and treatment have aided in properly identifying and improving symptoms in patients. However, a large proportion of iNPH patients remain either undiagnosed or misdiagnosed. Using PubMed search engine of keywords “normal pressure hydrocephalus,” “diagnosis,” “shunt treatment,” “biomarkers,” “gait disturbances,” “cognitive function,” “neuropsychology,” “imaging,” and “pathogenesis,” articles were obtained for this review. The majority of the articles were retrieved from the past 10 years. The purpose of this review article is to aid general practitioners in further understanding current findings on the pathogenesis, diagnosis, and treatment of iNPH.
Nissen, Nina Konstantin; Holm, Lotte; Baarts, Charlotte
2015-01-01
Introduction : An extensive body of literature is concerned with obese people, risk, and weight management. However, little is known about weight management among people not belonging to the extreme BMI categories. Management of weight among normal-weight and moderately overweight individuals...... provides us with knowledge about how to prevent future overweight or obesity. This paper investigates body size ideals and monitoring practices among normal-weight and moderately overweight people. Methods : The study is based on in-depth interviews combined with observations. 24 participants were...... of practices for monitoring their bodies based on different kinds of calculations of weight and body size, observations of body shape, and measurements of bodily firmness. Biometric measurements are familiar to them as are health authorities' recommendations. Despite not belonging to an extreme BMI category...
Normal Order: Combinatorial Graphs
Solomon, A I; Blasiak, P; Horzela, A; Penson, K A; Solomon, Allan I.; Duchamp, Gerard; Blasiak, Pawel; Horzela, Andrzej; Penson, Karol A.
2004-01-01
A conventional context for supersymmetric problems arises when we consider systems containing both boson and fermion operators. In this note we consider the normal ordering problem for a string of such operators. In the general case, upon which we touch briefly, this problem leads to combinatorial numbers, the so-called Rook numbers. Since we assume that the two species, bosons and fermions, commute, we subsequently restrict ourselves to consideration of a single species, single-mode boson monomials. This problem leads to elegant generalisations of well-known combinatorial numbers, specifically Bell and Stirling numbers. We explicitly give the generating functions for some classes of these numbers. In this note we concentrate on the combinatorial graph approach, showing how some important classical results of graph theory lead to transparent representations of the combinatorial numbers associated with the boson normal ordering problem.
Normality concerning shared values
2009-01-01
Let F be a family of meromorphic functions in a plane domain D, and a and b be finite non-zero complex values such that a/b ∈ N \\ {1}. If for every f ∈ F, f(z) = a =■ f (z) = a and f (z) = b =■ f (z) = b, then F is normal. We also construct a non-normal family F of meromorphic functions in the unit disk Δ = {|z| < 1} such that for every f ∈ F, f(z) = m + 1 f (z) = m + 1 and f (z) = 1 f (z) = 1 in Δ, where m is a given positive integer. This answers Problem 5.1 in the works of Gu, Pang and Fang.
Normality concerning shared values
CHANG JianMing
2009-01-01
Let F be a family of meromorphic functions in a plane domain D,and a and b be finite non-zero complex values such that a/b ∈ N \\ {1}.If for every f ∈ F,f(z)=a＝>(z) = a and f'(z)=b=>f"(z)=b,then F is normal.We also construct a non-normal family F of meromorphic functions in the unit disk △= {|z|＜1} such that for every f ∈F,f(z) =m+1f'(z) = m+1and f'(z)=1 f"(z) = 1 in △ A,where m is a given positive integer.This answers Problem 5.1 in the works of Gu,Pang and Fang.
Hospital strain colonization by Staphylococcus epidermidis
D. Blum-Menezes
2009-03-01
Full Text Available The skin and mucous membranes of healthy subjects are colonized by strains of Staphylococcus epidermidis showing a high diversity of genomic DNA polymorphisms. Prolonged hospitalization and the use of invasive procedures promote changes in the microbiota with subsequent colonization by hospital strains. We report here a patient with prolonged hospitalization due to chronic pancreatitis who was treated with multiple antibiotics, invasive procedures and abdominal surgery. We studied the dynamics of skin colonization by S. epidermidis leading to the development of catheter-related infections and compared the genotypic profile of clinical and microbiota strains by pulsed field gel electrophoresis. During hospitalization, the normal S. epidermidis skin microbiota exhibiting a polymorphic genomic DNA profile was replaced with a hospital-acquired biofilm-producer S. epidermidis strain that subsequently caused repetitive catheter-related infections.
Shook, John R; Giordano, James
2016-01-01
An integrated and principled neuroethics offers ethical guidelines able to transcend conventional and medical reliance on normality standards. Elsewhere we have proposed four principles for wise guidance on human transformations. Principles like these are already urgently needed, as bio- and cyberenhancements are rapidly emerging. Context matters. Neither "treatments" nor "enhancements" are objectively identifiable apart from performance expectations, social contexts, and civic orders. Lessons learned from disability studies about enablement and inclusion suggest a fresh way to categorize modifications to the body and its performance. The term "enhancement" should be broken apart to permit recognition of enablements and augmentations, and kinds of radical augmentation for specialized performance. Augmentations affecting the self, self-worth, and self-identity of persons require heightened ethical scrutiny. Reversibility becomes the core problem, not the easy answer, as augmented persons may not cooperate with either decommissioning or displacement into unaccommodating societies. We conclude by indicating how our four principles of self-creativity, nonobsolescence, empowerment, and citizenship establish a neuroethics beyond normal that is better prepared for a future in which humans and their societies are going so far beyond normal.
Strain rate effect in high-speed wire drawing process
He, S.; Van Houtte, P.; Van Bael, A.; Mei, F.; Sarban, A.; Boesman, P.; Galvez, F.; Atienza, J. M.
2002-05-01
This paper presents a study on the strain rate effect during high-speed wire drawing process by means of finite element simulation. Based on the quasistatic stresses obtained by normal tensile tests and dynamic stresses at high strain rates by split Hopkinson pressure bar tests, the wire drawing process was simulated for low carbon steel and high carbon steel. The results show that both the deformation process and the final properties of drawn wires are influenced by the strain rate.
Maximum permissible concentrations of uranium in air
Adams, N
1973-01-01
The retention of uranium by bone and kidney has been re-evaluated taking account of recently published data for a man who had been occupationally exposed to natural uranium aerosols and for adults who had ingested uranium at the normal dietary levels. For life-time occupational exposure to uranium aerosols the new retention functions yield a greater retention in bone and a smaller retention in kidney than the earlier ones, which were based on acute intakes of uranium by terminal patients. Hence bone replaces kidney as the critical organ. The (MPC) sub a for uranium 238 on radiological considerations using the current (1959) ICRP lung model for the new retention functions is slightly smaller than for earlier functions but the (MPC) sub a determined by chemical toxicity remains the most restrictive.
20 CFR 211.14 - Maximum creditable compensation.
2010-04-01
... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Maximum creditable compensation. 211.14... CREDITABLE RAILROAD COMPENSATION § 211.14 Maximum creditable compensation. Maximum creditable compensation... Employment Accounts shall notify each employer of the amount of maximum creditable compensation applicable...
49 CFR 230.24 - Maximum allowable stress.
2010-10-01
... 49 Transportation 4 2010-10-01 2010-10-01 false Maximum allowable stress. 230.24 Section 230.24... Allowable Stress § 230.24 Maximum allowable stress. (a) Maximum allowable stress value. The maximum allowable stress value on any component of a steam locomotive boiler shall not exceed 1/4 of the ultimate...
A tunable strain sensor using nanogranular metals.
Schwalb, Christian H; Grimm, Christina; Baranowski, Markus; Sachser, Roland; Porrati, Fabrizio; Reith, Heiko; Das, Pintu; Müller, Jens; Völklein, Friedemann; Kaya, Alexander; Huth, Michael
2010-01-01
This paper introduces a new methodology for the fabrication of strain-sensor elements for MEMS and NEMS applications based on the tunneling effect in nano-granular metals. The strain-sensor elements are prepared by the maskless lithography technique of focused electron-beam-induced deposition (FEBID) employing the precursor trimethylmethylcyclopentadienyl platinum [MeCpPt(Me)(3)]. We use a cantilever-based deflection technique to determine the sensitivity (gauge factor) of the sensor element. We find that its sensitivity depends on the electrical conductivity and can be continuously tuned, either by the thickness of the deposit or by electron-beam irradiation leading to a distinct maximum in the sensitivity. This maximum finds a theoretical rationale in recent advances in the understanding of electronic charge transport in nano-granular metals.
A Tunable Strain Sensor Using Nanogranular Metals
Friedemann Völklein
2010-11-01
Full Text Available This paper introduces a new methodology for the fabrication of strain-sensor elements for MEMS and NEMS applications based on the tunneling effect in nano-granular metals. The strain-sensor elements are prepared by the maskless lithography technique of focused electron-beam-induced deposition (FEBID employing the precursor trimethylmethylcyclopentadienyl platinum [MeCpPt(Me3]. We use a cantilever-based deflection technique to determine the sensitivity (gauge factor of the sensor element. We find that its sensitivity depends on the electrical conductivity and can be continuously tuned, either by the thickness of the deposit or by electron-beam irradiation leading to a distinct maximum in the sensitivity. This maximum finds a theoretical rationale in recent advances in the understanding of electronic charge transport in nano-granular metals.
A Tunable Strain Sensor Using Nanogranular Metals
Schwalb, Christian H.; Grimm, Christina; Baranowski, Markus; Sachser, Roland; Porrati, Fabrizio; Reith, Heiko; Das, Pintu; Müller, Jens; Völklein, Friedemann; Kaya, Alexander; Huth, Michael
2010-01-01
This paper introduces a new methodology for the fabrication of strain-sensor elements for MEMS and NEMS applications based on the tunneling effect in nano-granular metals. The strain-sensor elements are prepared by the maskless lithography technique of focused electron-beam-induced deposition (FEBID) employing the precursor trimethylmethylcyclopentadienyl platinum [MeCpPt(Me)3]. We use a cantilever-based deflection technique to determine the sensitivity (gauge factor) of the sensor element. We find that its sensitivity depends on the electrical conductivity and can be continuously tuned, either by the thickness of the deposit or by electron-beam irradiation leading to a distinct maximum in the sensitivity. This maximum finds a theoretical rationale in recent advances in the understanding of electronic charge transport in nano-granular metals. PMID:22163443
Characterization of urinary Escherichia coli O75 strains.
Nimmich, W; Voigt, W; Seltmann, G
1997-01-01
Forty-four Escherichia coli O75 strains from patients with urinary tract infections were characterized by a variety of methods to obtain evidence of their clonal distribution and uropathogenic properties. By K and H antigen typing, the strains were divided into the following serotypes: O75:K5:H- (18 strains), O75:K95:H- (10 strains), O75:K95:H5 (7 strains), O75:K100:H5 (4 strains), and O75:K-:H55 (5 strains). Generally, biotyping proved to be of no discriminative value. With two exceptions the strains were found to be sensitive to the bactericidal effect of normal human serum. As shown by multilocus enzyme electrophoresis, the whole-cell protein profile (WCPP), and the patterns of the outer membrane proteins and lipopolysaccharides, all but the five O75:H55 strains were genetically closely related to each other and could be classified into one clonal group. The O75:K-:H55 strains proved to be quite different and lacked type 1 fimbriae. All 17 K95 (H-, H5) strains produced hemolysin and P fimbriae. Five of the O75:K5:H- strains were different from the other K5 strains by showing hemagglutinating properties, on the basis of the presence of the OX adhesin. The last two groups are suggested to be uropathogenic and are proposed to represent separate clonal groups or subgroups. PMID:9114391
Theoretical Estimate of Maximum Possible Nuclear Explosion
Bethe, H. A.
1950-01-31
The maximum nuclear accident which could occur in a Na-cooled, Be moderated, Pu and power producing reactor is estimated theoretically. (T.R.H.) 2O82 Results of nuclear calculations for a variety of compositions of fast, heterogeneous, sodium-cooled, U-235-fueled, plutonium- and power-producing reactors are reported. Core compositions typical of plate-, pin-, or wire-type fuel elements and with uranium as metal, alloy, and oxide were considered. These compositions included atom ratios in the following range: U-23B to U-235 from 2 to 8; sodium to U-235 from 1.5 to 12; iron to U-235 from 5 to 18; and vanadium to U-235 from 11 to 33. Calculations were performed to determine the effect of lead and iron reflectors between the core and blanket. Both natural and depleted uranium were evaluated as the blanket fertile material. Reactors were compared on a basis of conversion ratio, specific power, and the product of both. The calculated results are in general agreement with the experimental results from fast reactor assemblies. An analysis of the effect of new cross-section values as they became available is included. (auth)
Proposed principles of maximum local entropy production.
Ross, John; Corlan, Alexandru D; Müller, Stefan C
2012-07-12
Articles have appeared that rely on the application of some form of "maximum local entropy production principle" (MEPP). This is usually an optimization principle that is supposed to compensate for the lack of structural information and measurements about complex systems, even systems as complex and as little characterized as the whole biosphere or the atmosphere of the Earth or even of less known bodies in the solar system. We select a number of claims from a few well-known papers that advocate this principle and we show that they are in error with the help of simple examples of well-known chemical and physical systems. These erroneous interpretations can be attributed to ignoring well-established and verified theoretical results such as (1) entropy does not necessarily increase in nonisolated systems, such as "local" subsystems; (2) macroscopic systems, as described by classical physics, are in general intrinsically deterministic-there are no "choices" in their evolution to be selected by using supplementary principles; (3) macroscopic deterministic systems are predictable to the extent to which their state and structure is sufficiently well-known; usually they are not sufficiently known, and probabilistic methods need to be employed for their prediction; and (4) there is no causal relationship between the thermodynamic constraints and the kinetics of reaction systems. In conclusion, any predictions based on MEPP-like principles should not be considered scientifically founded.
Maximum entropy production and plant optimization theories.
Dewar, Roderick C
2010-05-12
Plant ecologists have proposed a variety of optimization theories to explain the adaptive behaviour and evolution of plants from the perspective of natural selection ('survival of the fittest'). Optimization theories identify some objective function--such as shoot or canopy photosynthesis, or growth rate--which is maximized with respect to one or more plant functional traits. However, the link between these objective functions and individual plant fitness is seldom quantified and there remains some uncertainty about the most appropriate choice of objective function to use. Here, plants are viewed from an alternative thermodynamic perspective, as members of a wider class of non-equilibrium systems for which maximum entropy production (MEP) has been proposed as a common theoretical principle. I show how MEP unifies different plant optimization theories that have been proposed previously on the basis of ad hoc measures of individual fitness--the different objective functions of these theories emerge as examples of entropy production on different spatio-temporal scales. The proposed statistical explanation of MEP, that states of MEP are by far the most probable ones, suggests a new and extended paradigm for biological evolution--'survival of the likeliest'--which applies from biomacromolecules to ecosystems, not just to individuals.
Maximum likelihood continuity mapping for fraud detection
Hogden, J.
1997-05-01
The author describes a novel time-series analysis technique called maximum likelihood continuity mapping (MALCOM), and focuses on one application of MALCOM: detecting fraud in medical insurance claims. Given a training data set composed of typical sequences, MALCOM creates a stochastic model of sequence generation, called a continuity map (CM). A CM maximizes the probability of sequences in the training set given the model constraints, CMs can be used to estimate the likelihood of sequences not found in the training set, enabling anomaly detection and sequence prediction--important aspects of data mining. Since MALCOM can be used on sequences of categorical data (e.g., sequences of words) as well as real valued data, MALCOM is also a potential replacement for database search tools such as N-gram analysis. In a recent experiment, MALCOM was used to evaluate the likelihood of patient medical histories, where ``medical history`` is used to mean the sequence of medical procedures performed on a patient. Physicians whose patients had anomalous medical histories (according to MALCOM) were evaluated for fraud by an independent agency. Of the small sample (12 physicians) that has been evaluated, 92% have been determined fraudulent or abusive. Despite the small sample, these results are encouraging.
Maximum life spiral bevel reduction design
Savage, M.; Prasanna, M. G.; Coe, H. H.
1992-07-01
Optimization is applied to the design of a spiral bevel gear reduction for maximum life at a given size. A modified feasible directions search algorithm permits a wide variety of inequality constraints and exact design requirements to be met with low sensitivity to initial values. Gear tooth bending strength and minimum contact ratio under load are included in the active constraints. The optimal design of the spiral bevel gear reduction includes the selection of bearing and shaft proportions in addition to gear mesh parameters. System life is maximized subject to a fixed back-cone distance of the spiral bevel gear set for a specified speed ratio, shaft angle, input torque, and power. Significant parameters in the design are: the spiral angle, the pressure angle, the numbers of teeth on the pinion and gear, and the location and size of the four support bearings. Interpolated polynomials expand the discrete bearing properties and proportions into continuous variables for gradient optimization. After finding the continuous optimum, a designer can analyze near optimal designs for comparison and selection. Design examples show the influence of the bearing lives on the gear parameters in the optimal configurations. For a fixed back-cone distance, optimal designs with larger shaft angles have larger service lives.
CORA - emission line fitting with Maximum Likelihood
Ness, J.-U.; Wichmann, R.
2002-07-01
The advent of pipeline-processed data both from space- and ground-based observatories often disposes of the need of full-fledged data reduction software with its associated steep learning curve. In many cases, a simple tool doing just one task, and doing it right, is all one wishes. In this spirit we introduce CORA, a line fitting tool based on the maximum likelihood technique, which has been developed for the analysis of emission line spectra with low count numbers and has successfully been used in several publications. CORA uses a rigorous application of Poisson statistics. From the assumption of Poissonian noise we derive the probability for a model of the emission line spectrum to represent the measured spectrum. The likelihood function is used as a criterion for optimizing the parameters of the theoretical spectrum and a fixed point equation is derived allowing an efficient way to obtain line fluxes. As an example we demonstrate the functionality of the program with an X-ray spectrum of Capella obtained with the Low Energy Transmission Grating Spectrometer (LETGS) on board the Chandra observatory and choose the analysis of the Ne IX triplet around 13.5 Å.
Finding maximum JPEG image block code size
Lakhani, Gopal
2012-07-01
We present a study of JPEG baseline coding. It aims to determine the minimum storage needed to buffer the JPEG Huffman code bits of 8-bit image blocks. Since DC is coded separately, and the encoder represents each AC coefficient by a pair of run-length/AC coefficient level, the net problem is to perform an efficient search for the optimal run-level pair sequence. We formulate it as a two-dimensional, nonlinear, integer programming problem and solve it using a branch-and-bound based search method. We derive two types of constraints to prune the search space. The first one is given as an upper-bound for the sum of squares of AC coefficients of a block, and it is used to discard sequences that cannot represent valid DCT blocks. The second type constraints are based on some interesting properties of the Huffman code table, and these are used to prune sequences that cannot be part of optimal solutions. Our main result is that if the default JPEG compression setting is used, space of minimum of 346 bits and maximum of 433 bits is sufficient to buffer the AC code bits of 8-bit image blocks. Our implementation also pruned the search space extremely well; the first constraint reduced the initial search space of 4 nodes down to less than 2 nodes, and the second set of constraints reduced it further by 97.8%.
Maximum likelihood estimates of pairwise rearrangement distances.
Serdoz, Stuart; Egri-Nagy, Attila; Sumner, Jeremy; Holland, Barbara R; Jarvis, Peter D; Tanaka, Mark M; Francis, Andrew R
2017-06-21
Accurate estimation of evolutionary distances between taxa is important for many phylogenetic reconstruction methods. Distances can be estimated using a range of different evolutionary models, from single nucleotide polymorphisms to large-scale genome rearrangements. Corresponding corrections for genome rearrangement distances fall into 3 categories: Empirical computational studies, Bayesian/MCMC approaches, and combinatorial approaches. Here, we introduce a maximum likelihood estimator for the inversion distance between a pair of genomes, using a group-theoretic approach to modelling inversions introduced recently. This MLE functions as a corrected distance: in particular, we show that because of the way sequences of inversions interact with each other, it is quite possible for minimal distance and MLE distance to differently order the distances of two genomes from a third. The second aspect tackles the problem of accounting for the symmetries of circular arrangements. While, generally, a frame of reference is locked, and all computation made accordingly, this work incorporates the action of the dihedral group so that distance estimates are free from any a priori frame of reference. The philosophy of accounting for symmetries can be applied to any existing correction method, for which examples are offered. Copyright © 2017 Elsevier Ltd. All rights reserved.
Boedeker, Peter
2017-01-01
Hierarchical linear modeling (HLM) is a useful tool when analyzing data collected from groups. There are many decisions to be made when constructing and estimating a model in HLM including which estimation technique to use. Three of the estimation techniques available when analyzing data with HLM are maximum likelihood, restricted maximum…
Strain y strain rate para dummies
Pastor Olaya, MD
2011-11-01
Full Text Available Desarrollos recientes en el campo de la ecocardiografía han permitido a los cardiólogos cuantificar de manera objetiva la función miocárdica regional y global con base en los conceptos de deformación (strain y velocidad de deformación (strain rate que pueden calcularse de manera no invasiva tanto en el ventrículo izquierdo como en el derecho, y suministrar valiosa información en múltiples escenarios clínicos. Dado que esta técnica novedosa y promisoria se utiliza cada vez más en la clínica y en estudios de investigación, se hace necesario el conocimiento adecuado de sus principios, así como de sus aspectos técnicos, alcances y limitaciones para una mejor implementación. En este artículo se busca dar explicación a los conceptos fundamentales y las potenciales aplicaciones clínicas de la strain y la strain rate derivados por speckle tracking (strain 2D.
Maximum likelihood molecular clock comb: analytic solutions.
Chor, Benny; Khetan, Amit; Snir, Sagi
2006-04-01
Maximum likelihood (ML) is increasingly used as an optimality criterion for selecting evolutionary trees, but finding the global optimum is a hard computational task. Because no general analytic solution is known, numeric techniques such as hill climbing or expectation maximization (EM), are used in order to find optimal parameters for a given tree. So far, analytic solutions were derived only for the simplest model--three taxa, two state characters, under a molecular clock. Four taxa rooted trees have two topologies--the fork (two subtrees with two leaves each) and the comb (one subtree with three leaves, the other with a single leaf). In a previous work, we devised a closed form analytic solution for the ML molecular clock fork. In this work, we extend the state of the art in the area of analytic solutions ML trees to the family of all four taxa trees under the molecular clock assumption. The change from the fork topology to the comb incurs a major increase in the complexity of the underlying algebraic system and requires novel techniques and approaches. We combine the ultrametric properties of molecular clock trees with the Hadamard conjugation to derive a number of topology dependent identities. Employing these identities, we substantially simplify the system of polynomial equations. We finally use tools from algebraic geometry (e.g., Gröbner bases, ideal saturation, resultants) and employ symbolic algebra software to obtain analytic solutions for the comb. We show that in contrast to the fork, the comb has no closed form solutions (expressed by radicals in the input data). In general, four taxa trees can have multiple ML points. In contrast, we can now prove that under the molecular clock assumption, the comb has a unique (local and global) ML point. (Such uniqueness was previously shown for the fork.).
Three dimensional strained semiconductors
Voss, Lars; Conway, Adam; Nikolic, Rebecca J.; Leao, Cedric Rocha; Shao, Qinghui
2016-11-08
In one embodiment, an apparatus includes a three dimensional structure comprising a semiconductor material, and at least one thin film in contact with at least one exterior surface of the three dimensional structure for inducing a strain in the structure, the thin film being characterized as providing at least one of: an induced strain of at least 0.05%, and an induced strain in at least 5% of a volume of the three dimensional structure. In another embodiment, a method includes forming a three dimensional structure comprising a semiconductor material, and depositing at least one thin film on at least one surface of the three dimensional structure for inducing a strain in the structure, the thin film being characterized as providing at least one of: an induced strain of at least 0.05%, and an induced strain in at least 5% of a volume of the structure.
Systrom, D M; Pappagianopoulos, P; Fishman, R S; Wain, J C; Ginns, L C
1998-12-01
Single lung transplantation for chronic obstructive pulmonary disease relieves a ventilatory limit to incremental exercise, but maximum oxygen uptake remains abnormal. The purpose of this study was to define the relative contributions of Fick principle variables to abnormal aerobic capacity after lung transplantation. Twelve paired incremental cardiopulmonary exercise test results obtained before and 3 to 6 months after single lung transplantation for chronic obstructive pulmonary disease were compared. Maximum workload nearly doubled after operation (42.5+/-4.2 vs 25.5+/-4.7 watts, P < .05). Peak exercise minute ventilation increased (32.8+/-3.3 vs 21+/-2.4 L/min, n = 11, P < .05), but maximum oxygen uptake remained markedly abnormal after transplantation (46.6%+/-4.4% vs 32.1%+/-2.9% predicted, P < .05, n = 8). Peak exercise cardiac output was normal (11.0+/-1.4 L/min, 89% predicted), but arterial-mixed venous oxygen content difference at peak exercise was only half of normal (7.2+/-0.61 mL/dL), as a result in part of the failure of mixed venous oxygen saturation to fall normally (peak exercise SvO2 = 49.8%+/-2.8%). Lung transplantation for chronic obstructive pulmonary disease relieves a ventilatory limit to exercise, but maximum aerobic capacity remains abnormal, in part because of abnormal systemic O2 extraction.
Maiti, CK
2012-01-01
Currently strain engineering is the main technique used to enhance the performance of advanced silicon-based metal-oxide-semiconductor field-effect transistors (MOSFETs). Written from an engineering application standpoint, Strain-Engineered MOSFETs introduces promising strain techniques to fabricate strain-engineered MOSFETs and to methods to assess the applications of these techniques. The book provides the background and physical insight needed to understand new and future developments in the modeling and design of n- and p-MOSFETs at nanoscale. This book focuses on recent developments in st
A Clustering Method Based on the Maximum Entropy Principle
Edwin Aldana-Bobadilla
2015-01-01
Full Text Available Clustering is an unsupervised process to determine which unlabeled objects in a set share interesting properties. The objects are grouped into k subsets (clusters whose elements optimize a proximity measure. Methods based on information theory have proven to be feasible alternatives. They are based on the assumption that a cluster is one subset with the minimal possible degree of “disorder”. They attempt to minimize the entropy of each cluster. We propose a clustering method based on the maximum entropy principle. Such a method explores the space of all possible probability distributions of the data to find one that maximizes the entropy subject to extra conditions based on prior information about the clusters. The prior information is based on the assumption that the elements of a cluster are “similar” to each other in accordance with some statistical measure. As a consequence of such a principle, those distributions of high entropy that satisfy the conditions are favored over others. Searching the space to find the optimal distribution of object in the clusters represents a hard combinatorial problem, which disallows the use of traditional optimization techniques. Genetic algorithms are a good alternative to solve this problem. We benchmark our method relative to the best theoretical performance, which is given by the Bayes classifier when data are normally distributed, and a multilayer perceptron network, which offers the best practical performance when data are not normal. In general, a supervised classification method will outperform a non-supervised one, since, in the first case, the elements of the classes are known a priori. In what follows, we show that our method’s effectiveness is comparable to a supervised one. This clearly exhibits the superiority of our method.
The Prediction of Maximum Amplitudes of Solar Cycles and the Maximum Amplitude of Solar Cycle 24
无
2002-01-01
We present a brief review of predictions of solar cycle maximum ampli-tude with a lead time of 2 years or more. It is pointed out that a precise predictionof the maximum amplitude with such a lead-time is still an open question despiteprogress made since the 1960s. A method of prediction using statistical character-istics of solar cycles is developed: the solar cycles are divided into two groups, ahigh rising velocity (HRV) group and a low rising velocity (LRV) group, dependingon the rising velocity in the ascending phase for a given duration of the ascendingphase. The amplitude of Solar Cycle 24 can be predicted after the start of thecycle using the formula derived in this paper. Now, about 5 years before the startof the cycle, we can make a preliminary prediction of 83.2-119.4 for its maximumamplitude.
Strain-induced negative differential resistance in ultrasmall carbon nanotube
Fang, Hui; Zhang, Fei-Peng; Ruan, Xing-Xiang; Huang, Can-Sheng; Jiang, Zhi-Nian; Peng, Jin-Yun; Wang, Ru-Zhi
2017-08-01
The transport properties in ultrasmall single-wall carbon nanotubes (SWCNTs) under tensile strain have been theoretically investigated. The regular negative differential resistance (NDR) induced by the strain undergoes a process from enhancement to weakening in the zigzag (3,0) SWCNT. The NDR achieves maximum with applying 4% tensile strain. Compared to the case of (3,0) SWCNT, that NDR cannot be manipulated by applying strain clearly in (4,0) and (5,0) ultrasmall SWCNTs with tensile strain lower than 10%. It proposes this strain-induced NDR effect to demonstrate the possibility of finding potential applications in SWCNT-based NDR nanodevices such as in memory devices, oscillators and fast switching devices.
Revisiting the Process of Normalization.
Zener, Rita Schaefer
1999-01-01
Defines normalization and deviations in child development. Discusses the three different levels in the normalization process. Asserts that guiding the process of normalization should drive the practice of Montessori education. Concludes that whenever there are brief episodes of normalization, the true nature of the child shows itself. (JS)
Normal transmitting boundary conditions
廖振鹏
1996-01-01
The multi-transmitting formula (MTF) governed by a single artificial speed is analytically developed into a generalized MTF governed by a few artificial speeds to improve its capacity in simultaneous simulation of several one-way waves propagating at different speeds.The generalized MTF is then discretized and further generalized using the space extrapolation to improve its accuracies in numerical simulation of transient waves at large angles of incidence.The above two successive generalizitions of MTF based on the notion of normal transmission lead to a compact formula of local non-reflecting boundary condition.The formula not only provides a general representation of the major schemes of existing local boundary conditions but can be used to generate new schemes,which combine advantages of different schemes.
Evaluating the Normal Distribution
George Marsaglia
2004-07-01
Full Text Available This article provides a little table-free C function that evaluates the normal distribution with absolute error less than 8 x 10 -16 . A small extension provides relative error near the limit available in double precision: 14 to 16 digits, the limits determined mainly by the computer's ability to evaluate exp(-t for large t. Results are compared with those provided by calls to erf or erfc functions, the best of which compare favorably, others do not, and all appear to be much more complicated than need be to get either absolute accuracy less than 10-15 or relative accuracy to the exp(-limited 14 to 16 digits. Also provided: A short history of the error function erf and its intended use, as well as, in the "browse files" attachment, various erf or erfc versions used for comparison.
Maximum likelihood estimation for semiparametric density ratio model.
Diao, Guoqing; Ning, Jing; Qin, Jing
2012-06-27
In the statistical literature, the conditional density model specification is commonly used to study regression effects. One attractive model is the semiparametric density ratio model, under which the conditional density function is the product of an unknown baseline density function and a known parametric function containing the covariate information. This model has a natural connection with generalized linear models and is closely related to biased sampling problems. Despite the attractive features and importance of this model, most existing methods are too restrictive since they are based on multi-sample data or conditional likelihood functions. The conditional likelihood approach can eliminate the unknown baseline density but cannot estimate it. We propose efficient estimation procedures based on the nonparametric likelihood. The nonparametric likelihood approach allows for general forms of covariates and estimates the regression parameters and the baseline density simultaneously. Therefore, the nonparametric likelihood approach is more versatile than the conditional likelihood approach especially when estimation of the conditional mean or other quantities of the outcome is of interest. We show that the nonparametric maximum likelihood estimators are consistent, asymptotically normal, and asymptotically efficient. Simulation studies demonstrate that the proposed methods perform well in practical settings. A real example is used for illustration.
Maximum length sequence and Bessel diffusers using active technologies
Cox, Trevor J.; Avis, Mark R.; Xiao, Lejun
2006-02-01
Active technologies can enable room acoustic diffusers to operate over a wider bandwidth than passive devices, by extending the bass response. Active impedance control can be used to generate surface impedance distributions which cause wavefront dispersion, as opposed to the more normal absorptive or pressure-cancelling target functions. This paper details the development of two new types of active diffusers which are difficult, if not impossible, to make as passive wide-band structures. The first type is a maximum length sequence diffuser where the well depths are designed to be frequency dependent to avoid the critical frequencies present in the passive device, and so achieve performance over a finite-bandwidth. The second is a Bessel diffuser, which exploits concepts developed for transducer arrays to form a hybrid absorber-diffuser. Details of the designs are given, and measurements of scattering and impedance used to show that the active diffusers are operating correctly over a bandwidth of about 100 Hz to 1.1 kHz. Boundary element method simulation is used to show how more application-realistic arrays of these devices would behave.
... and chronic. An acute strain occurs when a muscle becomes strained or pulled — or may even tear — when it stretches unusually far or abruptly. Acute ... and increases joint range of motion, making the muscles less tight and less prone to trauma ... Environmental conditions. Slippery or uneven surfaces can make ...
Highly Strained Organophosphorus Compounds
Slootweg, J.C.
2005-01-01
In our research on small, strained organophosphorus ring systems we became interested in the synthesis and applications of species that are even more strained than the parent phosphirane, by introducing an exocyclic double bond (methylenephosphirane), and by cyclopropyl spirofusion to the edge (e.g
Pattern formation, logistics, and maximum path probability
Kirkaldy, J. S.
1985-05-01
The concept of pattern formation, which to current researchers is a synonym for self-organization, carries the connotation of deductive logic together with the process of spontaneous inference. Defining a pattern as an equivalence relation on a set of thermodynamic objects, we establish that a large class of irreversible pattern-forming systems, evolving along idealized quasisteady paths, approaches the stable steady state as a mapping upon the formal deductive imperatives of a propositional function calculus. In the preamble the classical reversible thermodynamics of composite systems is analyzed as an externally manipulated system of space partitioning and classification based on ideal enclosures and diaphragms. The diaphragms have discrete classification capabilities which are designated in relation to conserved quantities by descriptors such as impervious, diathermal, and adiabatic. Differentiability in the continuum thermodynamic calculus is invoked as equivalent to analyticity and consistency in the underlying class or sentential calculus. The seat of inference, however, rests with the thermodynamicist. In the transition to an irreversible pattern-forming system the defined nature of the composite reservoirs remains, but a given diaphragm is replaced by a pattern-forming system which by its nature is a spontaneously evolving volume partitioner and classifier of invariants. The seat of volition or inference for the classification system is thus transferred from the experimenter or theoretician to the diaphragm, and with it the full deductive facility. The equivalence relations or partitions associated with the emerging patterns may thus be associated with theorems of the natural pattern-forming calculus. The entropy function, together with its derivatives, is the vehicle which relates the logistics of reservoirs and diaphragms to the analog logistics of the continuum. Maximum path probability or second-order differentiability of the entropy in isolation are
Sreenivasulu Tadakaluru; Wiradej Thongsuwan; Pisith Singjai
2014-01-01
Conventional metallic strain sensors are flexible, but they can sustain maximum strains of only ∼5%, so there is a need for sensors that can bear high strains for multifunctional applications. In this study, we report stretchable and flexible high-strain sensors that consist of entangled and randomly distributed multiwall carbon nanotubes or graphite flakes on a natural rubber substrate. Carbon nanotubes/graphite flakes were sandwiched in natural rubber to produce these high-strain sensors. U...
Spline Nonparametric Regression Analysis of Stress-Strain Curve of Confined Concrete
Tavio Tavio
2008-01-01
Full Text Available Due to enormous uncertainties in confinement models associated with the maximum compressive strength and ductility of concrete confined by rectilinear ties, the implementation of spline nonparametric regression analysis is proposed herein as an alternative approach. The statistical evaluation is carried out based on 128 large-scale column specimens of either normal-or high-strength concrete tested under uniaxial compression. The main advantage of this kind of analysis is that it can be applied when the trend of relation between predictor and response variables are not obvious. The error in the analysis can, therefore, be minimized so that it does not depend on the assumption of a particular shape of the curve. This provides higher flexibility in the application. The results of the statistical analysis indicates that the stress-strain curves of confined concrete obtained from the spline nonparametric regression analysis proves to be in good agreement with the experimental curves available in literatures
Constitutive relations for the shear band evolution in granular matter under large strain
无
2008-01-01
A so-called "split-bottom ring shear cell" leads to wide shear bands under slow, quasi-static deformation. Unlike normal cylindrical Couette shear cells or rheometers, the bottom plate is split such that the outer part of it can move with the outer wail, while the other part (inner disk) is immobile. From discrete element simulations (DEM), several continuum fields like the density, velocity, deformation gradient and stress are computed and evaluated with the goal to formulate objective constitutive relations for the powder flow behavior. From a single simulation, by applying time-and (local) space-averaging, a non-linear yield surface is obtained with peculiar stress dependence.The anisotropy is always smaller than the macroscopic friction coefficient. However, the lower bound of anisotropy increases with the strain rate, approaching the maximum according to a stretched exponential with a specific rate that is consistent with a shear path of about one particle diameter.
光纤布拉格光栅应变花%Fiber Bragg Grating Strain Rosette
无
2006-01-01
In this paper a Fiber Bragg Grating (FBG) Strain Rosette is designed, developed and tested. Traditional FBGs measure strain in only one direction. However, in-plane strain at a point consists of two normal strains and one shear strain. Hence a FBG strain rosette needs to be designed. The sensing principle of FBGs as a strain and temperature sensor and fundamental principles of strain transformation and strain gage rosettes are discussed.FBG strain rosettes are fabricated and embedded in two materials namely, Silicon Gel RTV 146-9 and Glass Fiber Composite Laminates. Experiments were conducted on the FBG strain rosette structures that were embedded in Silicon Gel (RTV 146-9). Initial findings from the experiments as well as preferred embedding material are presented.
Evaluation of strain levels in the IFSF rack
Richins, W.D.; Miller, G.K.
1997-06-01
An evaluation has been performed on strain levels determined for the IFSF fuel storage rack for seismic loading. The storage rack had been previously analyzed by a consulting company, Advanced Engineering Consultants (AEC), who reported significant strain levels in several members of the rack. The purpose for the study conducted herein was to refine the method for calculating strain levels, and then to assess the acceptability of the refined strain values. This was accomplished by making a modification to AEC`s model to more realistically represent plastic behavior in all locations where material yields. An analysis was performed where this modified model was subjected to the same seismic loadings as applied in AEC`s analysis. It was expected that the more realistic representation of plastic behavior in the modified model would result in reduced maximum calculated strains for the rack. Results of the analysis showed that the more realistic representation of plastic behavior in rack members did reduce the calculated maximum strains from those reported by AEC. These modified strains were evaluated for acceptability according to ductility criteria of the governing standard (i.e. ANSI/AISC N690-1994, as specified by the project Criteria Application Document). This evaluation showed that the strains meet these acceptance criteria. The analysis described herein was performed only to investigate this issue. AEC`s analysis stands as the analysis of record for the rack.
Strain y strain rate para dummies Strain and strain rate for dummies
Pastor Olaya
2011-12-01
Full Text Available Desarrollos recientes en el campo de la ecocardiografía han permitido a los cardiólogos cuantificar de manera objetiva la función miocárdica regional y global con base en los conceptos de deformación (strain y velocidad de deformación (strain rate que pueden calcularse de manera no invasiva tanto en el ventrículo izquierdo como en el derecho, y suministrar valiosa información en múltiples escenarios clínicos. Dado que esta técnica novedosa y promisoria se utiliza cada vez más en la clínica y en estudios de investigación, se hace necesario el conocimiento adecuado de sus principios, así como de sus aspectos técnicos, alcances y limitaciones para una mejor implementación. En este artículo se busca dar explicación a los conceptos fundamentales y las potenciales aplicaciones clínicas de la strain y la strain rate derivados por speckle tracking (strain 2D.Recent developments in the field of echocardiography have allowed cardiologists to objectively quantify regional and global myocardial function based on the deformation (strain and strain rate which can be calculated non-invasively in both the left or right ventricle, and provide valuable information in multiple clinical settings. Since this new technique is promising and is being increasingly used in clinical and research studies, the adequate knowledge of its principles and its technical aspects, scope and limitations are necessary for its better implementation. This article seeks to explain fundamental concepts and potential clinical applications of strain and strain rate derived by speckle tracking (2D strain.
Diabetes Insipidus after normal vaginal delivery: a case report
Farideh Keypour
2014-07-01
Treatment was continuing, when the symptoms of central diabetes insipidus resolve and urinary concentrating ability was preferred. Maximum urinary osmolality over the next 11 hours was assessed, 730 mosm/kg was considered normal. Conclusion: Close attention to electrolyte and fluid balance is important in the postpartum period. The symptoms of transient vasopressin-resistant diabetes insipidus resolve in few days to a few weeks after vaginal delivery or when hepatic function returns to normal.
Cardiorespiratory Fitness of Inmates of a Maximum Security Prison ...
USER
Maximum Security Prison; and also to determine the effects of age, gender, and period of incarceration on CRF. A total of 247 apparently healthy inmates of Maiduguri Maximum Security ... with different types of cardiovascular and metabolic.
Maximum likelihood polynomial regression for robust speech recognition
LU Yong; WU Zhenyang
2011-01-01
The linear hypothesis is the main disadvantage of maximum likelihood linear re- gression （MLLR）. This paper applies the polynomial regression method to model adaptation and establishes a nonlinear model adaptation algorithm using maximum likelihood polyno
Evandro Watanabe
2008-08-01
Full Text Available The aim of this in vitro study was to determine the maximum inhibitory dilution (MID of four cetylpyridinium chloride (CPC-based mouthwashes: CPC+Propolis, CPC+Malva, CPC+Eucaliptol+Juá+Romã+Propolis (Natural Honey® and CPC (Cepacol®, against 28 Staphylococcus aureus field strains, using the agar dilution method. Decimal dilutions ranging from 1/10 to 1/655,360 were prepared and added to Mueller Hinton Agar. Strains were inoculated using Steers multipoint inoculator. The inocula were seeded onto the surface of the culture medium in Petri dishes containing different dilutions of the mouthwashes. The dishes were incubated at 37ºC for 24 h. For readings, the MID was considered as the maximum dilution of mouthwash still capable of inhibiting microbial growth. The obtained data showed that CPC+Propolis had antimicrobial activity against 27 strains at 1/320 dilution and against all 28 strains at 1/160 dilution, CPC+Malva inhibited the growth of all 28 strains at 1/320 dilution, CPC+Eucaliptol+Juá+Romã+Propolis inhibited the growth of 2 strains at 1/640 dilution and all 28 strains at 1/320 dilution, and Cepacol® showed antimicrobial activity against 3 strains at 1/320 dilution and against all 28 strains at 1/160 dilution. Data were submitted to Kruskal-Wallis test, showing that the MID of Cepacol® was lower than that determined for the other products (p<0.05. In conclusion, CPC-mouthwashes showed antimicrobial activity against S. aureus and the addition of other substances to CPC improved its antimicrobial effect.
Capacitive Extensometer Particularly Suited for Measuring in Vivo Bone Strain
Perusek, Gail P. (Inventor)
2000-01-01
The present invention provides for in vivo measurements of the principal strain magnitudes and directions, and maximum shear strain that occurs in a material, such as human bone, when it is loaded (or subjected to a load). In one embodiment the invention includes a capacitive delta extensometer arranged with six sensors in a three piece configuration, with each sensor of each pair spaced apart from each other by 120 degrees.
M. Mihelich
2014-11-01
Full Text Available We derive rigorous results on the link between the principle of maximum entropy production and the principle of maximum Kolmogorov–Sinai entropy using a Markov model of the passive scalar diffusion called the Zero Range Process. We show analytically that both the entropy production and the Kolmogorov–Sinai entropy seen as functions of f admit a unique maximum denoted fmaxEP and fmaxKS. The behavior of these two maxima is explored as a function of the system disequilibrium and the system resolution N. The main result of this article is that fmaxEP and fmaxKS have the same Taylor expansion at first order in the deviation of equilibrium. We find that fmaxEP hardly depends on N whereas fmaxKS depends strongly on N. In particular, for a fixed difference of potential between the reservoirs, fmaxEP(N tends towards a non-zero value, while fmaxKS(N tends to 0 when N goes to infinity. For values of N typical of that adopted by Paltridge and climatologists (N ≈ 10 ~ 100, we show that fmaxEP and fmaxKS coincide even far from equilibrium. Finally, we show that one can find an optimal resolution N* such that fmaxEP and fmaxKS coincide, at least up to a second order parameter proportional to the non-equilibrium fluxes imposed to the boundaries. We find that the optimal resolution N* depends on the non equilibrium fluxes, so that deeper convection should be represented on finer grids. This result points to the inadequacy of using a single grid for representing convection in climate and weather models. Moreover, the application of this principle to passive scalar transport parametrization is therefore expected to provide both the value of the optimal flux, and of the optimal number of degrees of freedom (resolution to describe the system.
Measurements of Normal and Friction Forces in a Rolling Process
Henningsen, Poul; Arentoft, Mogens; Wanheim, Tarras
2004-01-01
To improve the quality of frictional data and to validate the simulations in rolling, a load transducer for measuring normal and friction stresses in the deformation zone has been developed. The transducer consists of a strain gauge equipped insert embedded in the surface of the roll. The length ...
Measurements of normal and frictional forces in a rolling process
Henningsen, Poul; Arentoft, Mogens; Wanheim, Tarras
2006-01-01
To improve the quality of frictional data and to validate the simulations in rolling, a load transducer for measuring normal and frictional stresses in the deformation zone has been developed. The transducer consists of a strain-gauge-equipped insert embedded in the surface of the roll. The length...
Jiang, Hongbo; Liao, Donghua; Zhao, Jingbo
2015-01-01
Background & aims: Stress softening is a feature of mechanical preconditioning in soft tissue. Previously, we demonstrated that esophageal stress softening is reversible by muscle activation with KCl. Since the esophagus consists of muscle and mucosa-submucosa layers, the aim was to study......M KCl was added for maximum contraction for 3min. KCl was washed out to permit relaxation and contractions were eliminated by immersion into Ca2+-free solution. After 1h rest, the tubes were exposed to five repeated ramp distensions conformed to the aforesaid two series. Stress-strain curves were used...... losses due to stress softening were recovered by KCl-induced contraction. Such losses could not be recovered by KCl in the diabetic esophageal muscle layer. The normal esophageal mucosa-submucosa layer obtained extra energy gain by KCl activation whereas the diabetic mucosa-submucosa layer became softer...
20 CFR 617.14 - Maximum amount of TRA.
2010-04-01
... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Maximum amount of TRA. 617.14 Section 617.14... FOR WORKERS UNDER THE TRADE ACT OF 1974 Trade Readjustment Allowances (TRA) § 617.14 Maximum amount of TRA. (a) General rule. Except as provided under paragraph (b) of this section, the maximum amount of...
40 CFR 94.107 - Determination of maximum test speed.
2010-07-01
... specified in 40 CFR 1065.510. These data points form the lug curve. It is not necessary to generate the... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Determination of maximum test speed... Determination of maximum test speed. (a) Overview. This section specifies how to determine maximum test...
14 CFR 25.1505 - Maximum operating limit speed.
2010-01-01
... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Maximum operating limit speed. 25.1505... Operating Limitations § 25.1505 Maximum operating limit speed. The maximum operating limit speed (V MO/M MO airspeed or Mach Number, whichever is critical at a particular altitude) is a speed that may not...
Maximum physical capacity testing in cancer patients undergoing chemotherapy
Knutsen, L.; Quist, M; Midtgaard, J
2006-01-01
BACKGROUND: Over the past few years there has been a growing interest in the field of physical exercise in rehabilitation of cancer patients, leading to requirements for objective maximum physical capacity measurement (maximum oxygen uptake (VO(2max)) and one-repetition maximum (1RM)) to determine...
Normal labour: a concept analysis.
Gould, D
2000-02-01
Midwives practice within the normal childbirth paradigm. It is argued that midwives failure to define normality has allowed increasing technicalization and medicalization of the normal physiological process of birth because doctors so closely define abnormality. A concept analysis model is used to clarify what is meant by the term 'normal labour'; the emphasis being on understanding what normal labour is as it applies to midwifery practice today. This analysis highlights the importance of movement and the sequential nature of normal labour, and reveals how this is implicit within the other uses of both the words normal and labour. The final definition of normal labour offered is intended to be complimentary to existing medical determinants of progress of normal labour, because as the body of the text stresses, medical knowledge is fundamentally enmeshed in midwifery care.
The Maximum Principle of Pontryagin in Control of Twolegged Robot Based on Human Walking System
Żur K.K.
2014-05-01
Full Text Available In the paper a hypothesis about state equations of human gait is presented. Instantaneous normalized power developed by human muscles at particular joints of a leg is a control vector in state equations of the human walking system. The maximum principle of Pontryagin in analysis of dynamic human knee joint was presented. The discrete Hamilton function of a knee joint is similar to a discrete square function of normalized power developed by muscles at the knee joint. The results satisfy optimal conditions and could be applied in control of exoskeleton and DAR type robot.
Nuclear Enhanced X-ray Maximum Entropy Method Used to Analyze Local Distortions in Simple Structures
Christensen, Sebastian; Bindzus, Niels; Christensen, Mogens
the ideal, undistorted rock-salt structure. NEXMEM employs a simple procedure to normalize extracted structure factors to the atomic form factors. The NDD is reconstructed by performing maximum entropy calculations on the normalized structure factors. NEXMEM has been validated by testing against simulated....... In addition, we have applied NEXMEM to multi-temperature synchrotron powder X-ray diffraction collected on PbX. Based on powder diffraction data, our study demonstrates that NEXMEM successfully improves the atomic resolution over standard MEM. This new tool aids our understanding of the local distortions...
Combinatorial Maps with Normalized Knot
Zeps, Dainis
2010-01-01
We consider combinatorial maps with fixed combinatorial knot numbered with augmenting numeration called normalized knot. We show that knot's normalization doesn't affect combinatorial map what concerns its generality. Knot's normalization leads to more concise numeration of corners in maps, e.g., odd or even corners allow easy to follow distinguished cycles in map caused by the fixation of the knot. Knot's normalization may be applied to edge structuring knot too. If both are normalized then one is fully and other partially normalized mutually.
The normal-auxeticity mechanical phase transition in graphene
Deng, Binghui; Hou, Jie; Zhu, Hanxing; Liu, Sheng; Liu, Emily; Shi, Yunfeng; Peng, Qing
2017-06-01
When a solid object is stretched, in general, it shrinks transversely. However, the abnormal ones are auxetic, which exhibit lateral expansion, or negative Poisson ratio. While graphene is a paradigm 2D material, surprisingly, graphene converts from normal to auxetic at certain strains. Here, we show via molecular dynamics simulations that the normal-auxeticity mechanical phase transition only occurs in uniaxial tension along the armchair direction or the nearest neighbor direction. Such a characteristic persists at temperatures up to 2400 K. Besides monolayer, bilayer and multi-layer graphene also possess such a normal-auxeticity transition. This unique property could extend the applications of graphene to new horizons.
Smits, Iris A M; Timmerman, Marieke E; Stegeman, Alwin
2016-05-01
Maximum likelihood estimation of the linear factor model for continuous items assumes normally distributed item scores. We consider deviations from normality by means of a skew-normally distributed factor model or a quadratic factor model. We show that the item distributions under a skew-normal factor are equivalent to those under a quadratic model up to third-order moments. The reverse only holds if the quadratic loadings are equal to each other and within certain bounds. We illustrate that observed data which follow any skew-normal factor model can be so well approximated with the quadratic factor model that the models are empirically indistinguishable, and that the reverse does not hold in general. The choice between the two models to account for deviations of normality is illustrated by an empirical example from clinical psychology. © 2015 The British Psychological Society.
Institutionalizing Normal: Rethinking Composition's Precedence in Normal Schools
Skinnell, Ryan
2013-01-01
Composition historians have recently worked to recover histories of composition in normal schools. This essay argues, however, that historians have inadvertently misconstrued the role of normal schools in American education by inaccurately comparing rhetorical education in normal schools to rhetorical education in colleges and universities.…
Paulsen, T.; Wilson, T. J.; Demosthenous, C.; Millan, C.; Jarrard, R. D.; Laufer, A.
2013-12-01
Strain analyses of mechanically twinned calcite in veins and faults hosted by Neogene (13.6 Ma to 4.3 Ma) sedimentary and volcanic rocks recovered within the ANDRILL AND-1B drill core from the Terror Rift in the southern Ross Sea, Antarctica, yield prolate and oblate ellipsoids with principal shortening and extension strains ranging from 0.1% to 8.5%. The majority of samples show homogeneous coaxial strain predominantly characterized by subvertical shortening, which we attribute to lithostatic loading in an Andersonian normal faulting stress regime during sedimentary and ice sheet burial of the stratigraphic sequence. The overall paucity of a non-coaxial layer-parallel shortening signal in the AND-1B twin populations suggests that horizontal compressive stresses predicted by Neogene transtensional kinematic models for the rift system have been absent or of insufficient magnitude to cause a widespread noncoaxial strain overprint. Limited numbers of oriented samples yield a possible average ESE extension direction for the rift that is subparallel to other indicators of Neogene extension. The lack of horizontal shortening in the twin data suggests the Neogene Terror Rift system either lacks a strong longitudinal strike-slip component, or that spatial partitioning of strain controls the maximum shortening axes seen in rocks of this age.
Berry, Vincent; Nicolas, François
2006-01-01
Given a set of evolutionary trees on a same set of taxa, the maximum agreement subtree problem (MAST), respectively, maximum compatible tree problem (MCT), consists of finding a largest subset of taxa such that all input trees restricted to these taxa are isomorphic, respectively compatible. These problems have several applications in phylogenetics such as the computation of a consensus of phylogenies obtained from different data sets, the identification of species subjected to horizontal gene transfers and, more recently, the inference of supertrees, e.g., Trees Of Life. We provide two linear time algorithms to check the isomorphism, respectively, compatibility, of a set of trees or otherwise identify a conflict between the trees with respect to the relative location of a small subset of taxa. Then, we use these algorithms as subroutines to solve MAST and MCT on rooted or unrooted trees of unbounded degree. More precisely, we give exact fixed-parameter tractable algorithms, whose running time is uniformly polynomial when the number of taxa on which the trees disagree is bounded. The improves on a known result for MAST and proves fixed-parameter tractability for MCT.
无
2010-01-01
The Louzidian low-angle ductile shear detachment zone at the south of Chifeng is a SE-dipping, low-angle normal fault system. It is composed mainly of ductile shear zone, ductile-brittle shear zone and brittle fault zone. The ductile shear zone consists of, from bottom to top, mylonitic rocks, protomylonites and mylonites. Finite strain measurement of feldspar strain markers from those rocks using the Rf /φ method shows that strain intensities (Es) of the mylonite at core of the ductile shear zone (Es=0.65-0.96) are higher than those of the mylonitic rocks close to the granite intrusions (Es=0.59-0.62) and of the protomylonites at top of the ductile shear zone (Es= 0.47-0.70), and the strain types of the protomylonites and mylonties are elongate strain and plane-flattening strain, respectively. The kinematic vorticity values (Wk) estimated by the Polar Mohr diagram and the Rigid Grain Net range from 0.81 to 0.90 with an average of 0.85 for the protomylonites, and from 0.53 to 0.80 with 0.66 on average for the mylonites; Wk values of the extensional crenulation cleavage, i.e., C′, estimated by C′ method range from 0.63 to 0.37 with an average of 0.50. The angles between the maximum principal stress and shearing direction determined using the Maximum effective moment criterion evolved from 61° to 69° and to 75°, and finally normal to shearing direction. The results of strain and kinematic vorticity measurements suggest that high strain corresponds to low kinematic vorticity. Kinematic vorticity measurements show that the Louzidian low-angle ductile shear detachment zone is a result of a combination of simple-dominated general shearing at the early stage and pure-dominated general shearing at the late stage. All these, together with isotope geochronology and regional tectonic background, suggest that the Louzidian ductile shear detachment zone resulted from a combination of crust extension and magma intrusion. The model of simple shear at the early stage and
An experimental method to obtain the elastic strain energy function from torsion-tension tests
Peng, S. T. J.; Landel, R. F.
1976-01-01
It is shown that by employing a torsion-tension test, it is possible to have a complete mapping near the origin of the two principal strain invariants associated with the rate of change of the strain energy function. However, the mathematical representation of the twist moment and normal forces vs strain and the strain energy function are complex. This problem is solved by using a set of solid cylindrical bars with different diameters such that the difference in diameter of two successive bars is small. The stress-strain equations can be grossly oversimplified by considering differences in twist moment and normal force as a function of difference in radius.
Normal and pathological altruism.
Seelig, B J; Rosof, L S
2001-01-01
The psychoanalytic literature on altruism is sparse, although much has been written on this topic from a sociobiological perspective. Freud (1917) first described the concept in "Libido Theory and Narcissism." In 1946 Anna Freud coined the term "altruistic surrender" to describe the psychodynamics of altruistic behavior in a group of inhibited individuals who were neurotically driven to do good for others. The usefulness and clinical applicability of this formulation, in conjunction with the frequent coexistence of masochism and altruism, encouraged psychoanalysts to regard all forms of altruism as having masochistic underpinnings. Since then, there has been a conflation of the two concepts in much of the analytic literature. This paper reexamines the psychoanalytic understanding of altruism and proposes an expansion of the concept to include a normal form. Five types of altruism are described: protoaltruism, generative altruism, conflicted altruism, pseudoaltruism, and psychotic altruism. Protoaltruism has biological roots and can be observed in animals. In humans, protoaltruism includes maternal and paternal nurturing and protectiveness. Generative altruism is the nonconflictual pleasure in fostering the success and/or welfare of another. Conflicted altruism is generative altruism that is drawn into conflict, but in which the pleasure and satisfaction of another (a proxy) is actually enjoyed. Pseudoaltruism originates in conflict and serves as a defensive cloak for underlying sadomasochism. Psychotic altruism is defined as the sometimes bizarre forms of caretaking behavior and associated self-denial seen in psychotic individuals, and often based on delusion. We consider Anna Freud's altruistic surrender to combine features of both conflict-laden altruism and pseudoaltruism. Two clinical illustrations are discussed.
Mikosch, Thomas Valentin; Moser, Martin
2013-01-01
We investigate the maximum increment of a random walk with heavy-tailed jump size distribution. Here heavy-tailedness is understood as regular variation of the finite-dimensional distributions. The jump sizes constitute a strictly stationary sequence. Using a continuous mapping argument acting on...... on the point processes of the normalized jump sizes, we prove that the maximum increment of the random walk converges in distribution to a Fréchet distributed random variable....
Surface normals and barycentric coordinates
Mullineux Glen
1996-01-01
Full Text Available The normal to a triangular parametric surface is investigated where the parameters used are barycentric coordinates. Formulae for the normal are obtained for non-rational and rational surfaces.
On Estimating the Parameters of Truncated Trivariate Normal Distributions
M. N. Bhattacharyya
1969-07-01
Full Text Available Maximum likehood estimates of the parameters of a trivariate normal distribution, with single truncation on two-variates, have been derived in this paper. The information matrix has also been given from which the asymptotic variances and covariances might be obtained for the estimates of the parameters of the restricted variables. Numerical examples have been worked out.
... Elsevier Saunders; 2015:chap 88. Reider B, Davies GJ, Provencher MT. Muscle strains about the hip and thigh. In: Reider B, Davies GJ, Provencher MT, eds. Orthopaedic Rehabilitation of the Athlete . ...
Tartaglia, Angelo
2015-01-01
Starting from some relevant facts concerning the behaviour of the universe over large scale and time span, the analogy between the geometric approach of General Relativ- ity and the classical description of an elastic strained material continuum is discussed. Extending the elastic deformation approach to four dimensions it is shown that the accelerated expansion of the universe is recovered. The strain field of space-time repro- duces properties similar to the ones ascribed to the dark energy currently called in to explain the accelerated expansion. The strain field in the primordial universe behaves as radiation, but asymptotically it reproduces the cosmological constant. Subjecting the theory to a number of cosmological tests confirms the soundness of the approach and gives an optimal value for the one parameter of the model, i.e. the bulk modulus of the space-time continuum. Finally various aspects of the Strained State Cosmology (SSC) are discussed and contrasted with some non-linear massive gravity theor...
Short proofs of strong normalization
Wojdyga, Aleksander
2008-01-01
This paper presents simple, syntactic strong normalization proofs for the simply-typed lambda-calculus and the polymorphic lambda-calculus (system F) with the full set of logical connectives, and all the permutative reductions. The normalization proofs use translations of terms and types to systems, for which strong normalization property is known.
Quadratic Loss of Isotonic Normal Means Under Simultaneous Order Restrictions
马艳萍; 史宁中
2002-01-01
For two normal populations with unknown means μ and unknown variances σ2,assume that there are simple order restrictions among the means and variances:μ1≤μ2 and σ12≥σ22>0,This case is said to be simultaneous order restriction by Shi (Maximum likelihood estimation of means and variances from normal populations under simultaneous order restrictions.J.Multivariate,Anal.50(1994),282-293.)and an iterative algorithm of computing the order restricted maximum likelihood estimates of μi and σi2 was given in that paper,This paper shows that the restricted maximum likelihood estimate of μi has smaller mean square loss than the usual estimate xi under some conditions.
Psychological strain between nurses
Andrea Obročníková
2015-12-01
Full Text Available Aim: The aim of the study was to identify differences in perception of work (mental workload among nurses providing acute and chronic nursing care. Design: Study design is cross-sectional and descriptive. Methods: The sample of respondents consisted of 97 nurses working in departments Neurology, Anesthesiology and Intensive Care Unit of the hospital St. James in Bardejov, University Hospital of L. Pasteur in Košice and University Hospital J. A. Reiman in Prešov. To measure psychological strain, Meister's questionnaire for neuropsychological strain was used. Results: Increased psychological strain was observed in nurses providing acute care versus nurses providing chronic care, particularly in job satisfaction, long-term tolerance, time constraints, high responsibility, nervousness, fatigue and satiety. In comparison with the population norm, nurses in acute care achieved significantly higher indicators of factor I (strain and gross score as nurses in neurological care. A statistically significant relationship between psychological stress and age of nurses working in anesthesiology and intensive care departments was confirmed. Nurses with long term practical experience are exposed to intense mental stress (especially in the areas of strain and monotony. Conclusion: The results of our study suggest the reality that variable qualities of work related strain among nurses can lead to physical and emotional exhaustion.
Choi, Changhoon; Ahn, Joongho; Jeon, Seungwan; Kim, Chulhong
2017-07-01
Vulnerable plaques are the major cause of cardiovascular disease, but they are difficult to detect with conventional intravascular imaging techniques. Techniques are needed to identify plaque vulnerability based on the presence of lipids in plaque. Thermal strain imaging (TSI) is an imaging technique based on ultrasound (US) wave propagation speed, which varies with the medium temperature. In TSI, the strain that occurs during tissue temperature change can be used for lipid detection because it has a different tendency depending on the type of tissue. Here, we demonstrate photothermal strain imaging (pTSI) using an intravascular ultrasound catheter. pTSI is performed by slightly and selectively heating lipid using a relatively inexpensive continuous laser source. We applied a speckle-tracking algorithm to US B-mode images for strain calculations. As a result, the strain produced in porcine fat was different from the strain produced in water-bearing gelatin phantom, which made it possible to distinguish the two. This suggests that pTSI could potentially be a way of differentiating lipids in coronary artery.
Present and Last Glacial Maximum climates as states of maximum entropy production
Herbert, Corentin; Kageyama, Masa; Dubrulle, Berengere
2011-01-01
The Earth, like other planets with a relatively thick atmosphere, is not locally in radiative equilibrium and the transport of energy by the geophysical fluids (atmosphere and ocean) plays a fundamental role in determining its climate. Using simple energy-balance models, it was suggested a few decades ago that the meridional energy fluxes might follow a thermodynamic Maximum Entropy Production (MEP) principle. In the present study, we assess the MEP hypothesis in the framework of a minimal climate model based solely on a robust radiative scheme and the MEP principle, with no extra assumptions. Specifically, we show that by choosing an adequate radiative exchange formulation, the Net Exchange Formulation, a rigorous derivation of all the physical parameters can be performed. The MEP principle is also extended to surface energy fluxes, in addition to meridional energy fluxes. The climate model presented here is extremely fast, needs very little empirical data and does not rely on ad hoc parameterizations. We in...
Strain engineering of WS2, WSe2, and WTe2
Amin, Bin
2014-01-01
We perform first-principles calculations to investigate the structural, electronic, and vibrational properties of WS2, WSe2, and WTe2 monolayers, taking into account the strong spin orbit coupling. A transition from a direct to an indirect band gap is achieved for compressive strain of 1% for WS2, 1.5% for WSe2, and 2% for WTe 2, while the nature of the band gap remains direct in the case of tensile strain. The size of the band gap passes through a maximum under compressive strain and decreases monotonically under tensile strain. A strong spin splitting is found for the valence band in all three compounds, which is further enhanced by tensile strain. The mobility of the electrons grows along the series WS2 < WSe2 < WTe2. This journal is © the Partner Organisations 2014.
Standard practice for strain controlled thermomechanical fatigue testing
American Society for Testing and Materials. Philadelphia
2010-01-01
1.1 This practice covers the determination of thermomechanical fatigue (TMF) properties of materials under uniaxially loaded strain-controlled conditions. A “thermomechanical” fatigue cycle is here defined as a condition where uniform temperature and strain fields over the specimen gage section are simultaneously varied and independently controlled. This practice is intended to address TMF testing performed in support of such activities as materials research and development, mechanical design, process and quality control, product performance, and failure analysis. While this practice is specific to strain-controlled testing, many sections will provide useful information for force-controlled or stress-controlled TMF testing. 1.2 This practice allows for any maximum and minimum values of temperature and mechanical strain, and temperature-mechanical strain phasing, with the restriction being that such parameters remain cyclically constant throughout the duration of the test. No restrictions are placed on en...
Molecular analysis and biochemical characteristics of degenerated strains of Cordyceps militaris.
Sun, Shu-Jing; Deng, Chang-Huan; Zhang, Liao-Yuan; Hu, Kai-Hui
2017-08-01
Cordyceps militaris has commercially been cultivated, but its degenerated subcultures have gradually resulted in the reduced production. In this study, the biological characteristics and DNA change of degenerated strains of C. militaris were analyzed in detail. The results showed that the degenerated strains exhibited the lower growth rate, and the deficiency in fruit body formation and pigment production. The degradation of strains was not attributable to DNA changes identified by RAPD and SRAP. Compared to normal strains, the biochemical indexes of degradation strains and normal strains showed that the carotenoid content of degradation strains was significantly lower, the activities of cellulase and amylase of degradation strains were slight lower, and the EPS content was lower, but the IPS was higher. All these results suggested that the degradation of C. militaris may be caused by the inhibition or in harmony of metabolite synthesis involved in the metabolic regulation, which should be further verified.
Liu, Hongguang; Xiong, Ke; Wang, Man; Bian, Kan; Zhu, Kongjun
2017-02-01
Ionic polymer-metal composite (IPMC) cantilever actuators demonstrate significant bending deformation upon application of excitation voltage across the electrodes. In this paper a cantilever beam shaped IPMC actuator with platinum (Pt) electrodes is fabricated to investigate the micro-scale lateral deformation behavior under DC voltages using a digital microscope to measure the deformation. The digital image correlation (DIC) method is utilized to analyze the displacement and strain fields of the sample. The experimental results indicate that the longitudinal normal strain is linearly distributed along the thickness direction and the strain gradient is approximately exponential with excitation voltage. The amplitude of the transverse strain is bigger than the longitudinal strain, and the strains are also found to decrease along the length direction of the IPMC cantilever actuator. The longitudinal and transverse normal strains of the IPMC actuator under DC voltages are compressive strains due to water loss effect in the air.
Heilbronner, Renée
2017-04-01
2017 marks the 50th anniversary of the publication of John Ramsay's well known textbook "Folding and Fracturing of Rocks" - ... and the 30th anniversary of the rejection of a rather less well known paper entitled "Strain: Fact or Fiction?" submitted by Renée Panozzo to the Journal of Structural Geology. The gist of the paper was simple and straight forward: it was argued that not every fabric that can be observed in deformed rocks is necessarily a measure of the amount of strain the rock incurred. A distinction was made between a general "fabric", i.e., the traceable geometry of grain boundaries, for example, and a so-called "strain fabric", i.e., the model geometry that would result from homogeneously straining an initially isotropic fabric and that would exhibit at least orthorhombic symmetry. To verify if a given fabric was indeed a strain fabric it was therefore suggested to use the SURFOR method (published by Panozzo) and to carry out a so-called strain test, i.e., a check of symmetry, before interpreting the results of a fabric analysis in terms of strain. The problem with the paper was that it was very obviously written out of frustration. The frustration came form having reviewed a number of manuscripts which tried to use the then novel SURFOR method for strain analysis without first checking if the the fabric was a indeed a "strain fabric" or not, and then blaming the SURFOR method for producing ambiguous results. As a result, the paper was not exactly well balanced and carefully thought out. It was considered "interesting but not scholarly" by one of the reviewers and down-right offensive by the second. To tell the truth, however, the paper was not formally rejected. The editor Sue Treagus strongly encouraged Panozzo to revise the paper, ... and 30 years later, I will follow her advise and offer a revised paper as a tribute to John Ramsay. To quote from the original manuscript: "We should be a little more impressed that strain works so well, and less
Fluid-assisted strain localization in the shallow subcontinental lithospheric mantle
Hidas, Károly; Tommasi, Andréa; Garrido, Carlos J.; Padrón-Navarta, José Alberto; Mainprice, David; Vauchez, Alain; Barou, Fabrice; Marchesi, Claudio
2016-10-01
We report microstructural evidence for fluid-assisted ductile strain localization in a ≤ 50 m-wide mylonitic-ultramylonitic shear zone in the Ronda Peridotite massif, Southern Spain. Strain localization occurred at relatively low pressure (formation of mylonites. Focusing of aqueous fluids in the shear zone favored the activation of dissolution-precipitation creep, resulting in further strain localization. This process is recorded by two generations of ultramylonitic bands composed of fine-grained, well-mixed olivine-orthopyroxene aggregates. Microstructural observations in the ultramylonites suggest alternating dissolution and precipitation of olivine and orthopyroxene, which may be explained by local changes in silica molality of the percolating fluid (disequilibrium and mass transfer at scales > mm). In the mylonites, olivine shows a crystal preferred orientation (CPO) coherent with dominant (001)[100] glide, probably due to the presence of interstitial fluids during deformation. In the ultramylonites, olivine CPO is weak to very weak, consistently with a decreasing contribution of dislocation creep to deformation. In contrast, fine-grained orthopyroxene in both mylonites and ultramylonites displays a clear CPO characterized by a [001] maximum normal to the foliation, which is not consistent with dislocation glide in any known slip system for orthopyroxene. We interpret this CPO as formed by oriented crystallization during dissolution-precipitation. In the present study, dissolution-precipitation creep predominates only in small-scale ultramylonite bands due to limited fluid availability and localized dynamic permeability. However, this process may be important in intermediate temperature domains of subduction zones, where it may lead to a feedback between strain localization and fluid transport.
Stochastic behavior of a cold standby system with maximum repair time
Ashish Kumar
2015-09-01
Full Text Available The main aim of the present paper is to analyze the stochastic behavior of a cold standby system with concept of preventive maintenance, priority and maximum repair time. For this purpose, a stochastic model is developed in which initially one unit is operative and other is kept as cold standby. There is a single server who visits the system immediately as and when required. The server takes the unit under preventive maintenance after a maximum operation time at normal mode if one standby unit is available for operation. If the repair of the failed unit is not possible up to a maximum repair time, failed unit is replaced by new one. The failure time, maximum operation time and maximum repair time distributions of the unit are considered as exponentially distributed while repair and maintenance time distributions are considered as arbitrary. All random variables are statistically independent and repairs are perfect. Various measures of system effectiveness are obtained by using the technique of semi-Markov process and RPT. To highlight the importance of the study numerical results are also obtained for MTSF, availability and profit function.
Hamaker, Ellen L.; Dolan, Conor V.; Molenaar, Peter C. M.
2003-01-01
Demonstrated, through simulation, that stationary autoregressive moving average (ARMA) models may be fitted readily when T>N, using normal theory raw maximum likelihood structural equation modeling. Also provides some illustrations based on real data. (SLD)
Study of dynamic strain aging in dual phase steel
Queiroz, R.R.U. [Instituto Federal de Minas Gerais. Rua Pandia Calogeras, 898, Bauxita, Ouro Preto, MG (Brazil); Cunha, F.G.G. [Department of Metallurgical and Materials Engineering, Universidade Federal de Minas Gerais, Av. Antonio Carlos, 6627, Pampulha, Belo Horizonte, MG (Brazil); Gonzalez, B.M., E-mail: gonzalez@demet.ufmg.br [Department of Metallurgical and Materials Engineering, Universidade Federal de Minas Gerais, Av. Antonio Carlos, 6627, Pampulha, Belo Horizonte, MG (Brazil)
2012-05-01
Highlights: Black-Right-Pointing-Pointer Characterization of the high temperature mechanical behavior of a dual phase steel. Black-Right-Pointing-Pointer Determination of the effect of dynamic strain aging on the strain hardening rate. Black-Right-Pointing-Pointer Identification of the mechanism associated with dynamic strain aging. Black-Right-Pointing-Pointer The value of the interaction energy carbon-dislocation in ferrite was confirmed. - Abstract: The susceptibility to dynamic strain aging of a dual phase steel was evaluated by the variation of mechanical properties in tension with the temperature and the strain rate. The tensile tests were performed at temperatures varying between 25 Degree-Sign C and 600 Degree-Sign C and at strain rates ranging from 10{sup -2} to 5 Multiplication-Sign 10{sup -4} s{sup -1}. The studied steel presented typical manifestations related to dynamic strain aging: serrated flow (the Portevin-Le Chatelier effect) for certain combinations of temperature and strain rates; the presence of a plateau in the variation of yield stress with temperature; a maximum in the curves of tensile strength, flow stress, and work hardening exponent as a function of temperature; and a minimum in the variation of total elongation with temperature. The determined apparent activation energy values, associated with the beginning of the Portevin-Le Chatelier effect and the maximum in the variation of flow stress with temperature, were 83 kJ/mol and 156 kJ/mol, respectively. These values suggest that the mechanism responsible for dynamic strain aging in the dual phase steel is the locking of dislocations by carbon atoms in ferrite and that the formation of clusters and/or transition carbides and carbide precipitation in martensite do not interfere with the dynamic strain aging process.
DenHartog, Emiel A; Rubenstein, Candace D; Deaton, A Shawn; Bogerd, Cornelis Peter
2017-03-01
A major concern for responders to hazardous materials (HazMat) incidents is the heat strain that is caused by fully encapsulated impermeable (NFPA 1991) suits. In a research project, funded by the US Department of Defense, the thermal strain experienced when wearing these suits was studied. Forty human subjects between the ages of 25 and 50 participated in a protocol approved by the local ethical committee. Six different fully encapsulated impermeable HazMat suits were evaluated in three climates: moderate (24°C, 50% RH, 20°C WBGT), warm-wet (32°C, 60% RH, 30°C WBGT), and hot-dry (45°C, 20% RH, 37°C WBGT, 200 W m-2 radiant load) and at three walking speeds: 2.5, 4, and 5.5 km h-1. The medium speed, 4 km h-1, was tested in all three climates and the other two walking speeds were only tested in the moderate climate. Prior to the test a submaximal exercise test in normal clothing was performed to determine a relationship between heart rate and oxygen consumption (pretest). In total, 163 exposures were measured. Tolerance time ranged from as low as 20 min in the hot-dry condition to 60 min (the maximum) in the moderate climate, especially common at the lowest walking speed. Between the six difference suits limited differences were found, a two-layered aluminized suit exhibited significant shorter tolerance times in the moderate climate, but no other major significant differences were found for the other climates or workloads. An important characteristic of the overall dataset is the large variability between the subjects. Although the average responses seem suitable to be predicted, the variability in the warmer strain conditions ranged from 20 min up to 60 min. The work load in these encapsulated impermeable suits was also significantly higher than working in normal clothing and higher than predicted by the Pandolf equation. Heart rate showed a very strong correlation to body core temperature and was in many cases the limiting factor. Setting the heart rate
A Note on k-Limited Maximum Base
Yang Ruishun; Yang Xiaowei
2006-01-01
The problem of k-limited maximum base was specified into two special problems of k-limited maximum base; that is, let subset D of the problem of k-limited maximum base be an independent set and a circuit of the matroid, respectively. It was proved that under this circumstance the collections of k-limited base satisfy base axioms. Then a new matroid was determined, and the problem of k-limited maximum base was transformed to the problem of maximum base of this new matroid. Aiming at the problem, two algorithms, which in essence are greedy algorithms based on former matroid, were presented for the two special problems of k-limited maximum base. They were proved to be reasonable and more efficient than the algorithm presented by Ma Zhongfan in view of the complexity of algorithm.
Anan'ina, Iu V; Chernukha, Iu G
1984-10-01
The leptospirocidal activity of normal animal sera with respect to 23 Leptospira strains was experimentally studied in vitro. 91.3% of the strains under study proved to be sensitive to the lytic action of cattle serum and 86.9%, to sheep serum. The uncinate variants of the pathogenic strains showed resistance to the action of the above sera, and their nonuncinate analogs were subject to agglutination with subsequent lysis, similarly to saprophytes.
An Interval Maximum Entropy Method for Quadratic Programming Problem
RUI Wen-juan; CAO De-xin; SONG Xie-wu
2005-01-01
With the idea of maximum entropy function and penalty function methods, we transform the quadratic programming problem into an unconstrained differentiable optimization problem, discuss the interval extension of the maximum entropy function, provide the region deletion test rules and design an interval maximum entropy algorithm for quadratic programming problem. The convergence of the method is proved and numerical results are presented. Both theoretical and numerical results show that the method is reliable and efficient.
Hutchinson, Thomas H. [Plymouth Marine Laboratory, Prospect Place, The Hoe, Plymouth PL1 3DH (United Kingdom)], E-mail: thom1@pml.ac.uk; Boegi, Christian [BASF SE, Product Safety, GUP/PA, Z470, 67056 Ludwigshafen (Germany); Winter, Matthew J. [AstraZeneca Safety, Health and Environment, Brixham Environmental Laboratory, Devon TQ5 8BA (United Kingdom); Owens, J. Willie [The Procter and Gamble Company, Central Product Safety, 11810 East Miami River Road, Cincinnati, OH 45252 (United States)
2009-02-19
There is increasing recognition of the need to identify specific sublethal effects of chemicals, such as reproductive toxicity, and specific modes of actions of the chemicals, such as interference with the endocrine system. To achieve these aims requires criteria which provide a basis to interpret study findings so as to separate these specific toxicities and modes of action from not only acute lethality per se but also from severe inanition and malaise that non-specifically compromise reproductive capacity and the response of endocrine endpoints. Mammalian toxicologists have recognized that very high dose levels are sometimes required to elicit both specific adverse effects and present the potential of non-specific 'systemic toxicity'. Mammalian toxicologists have developed the concept of a maximum tolerated dose (MTD) beyond which a specific toxicity or action cannot be attributed to a test substance due to the compromised state of the organism. Ecotoxicologists are now confronted by a similar challenge and must develop an analogous concept of a MTD and the respective criteria. As examples of this conundrum, we note recent developments in efforts to validate protocols for fish reproductive toxicity and endocrine screens (e.g. some chemicals originally selected as 'negatives' elicited decreases in fecundity or changes in endpoints intended to be biomarkers for endocrine modes of action). Unless analogous criteria can be developed, the potentially confounding effects of systemic toxicity may then undermine the reliable assessment of specific reproductive effects or biomarkers such as vitellogenin or spiggin. The same issue confronts other areas of aquatic toxicology (e.g., genotoxicity) and the use of aquatic animals for preclinical assessments of drugs (e.g., use of zebrafish for drug safety assessment). We propose that there are benefits to adopting the concept of an MTD for toxicology and pharmacology studies using fish and other aquatic
Integer Programming Model for Maximum Clique in Graph
YUAN Xi-bo; YANG You; ZENG Xin-hai
2005-01-01
The maximum clique or maximum independent set of graph is a classical problem in graph theory. Combined with Boolean algebra and integer programming, two integer programming models for maximum clique problem,which improve the old results were designed in this paper. Then, the programming model for maximum independent set is a corollary of the main results. These two models can be easily applied to computer algorithm and software, and suitable for graphs of any scale. Finally the models are presented as Lingo algorithms, verified and compared by several examples.
Counterexamples to convergence theorem of maximum-entropy clustering algorithm
于剑; 石洪波; 黄厚宽; 孙喜晨; 程乾生
2003-01-01
In this paper, we surveyed the development of maximum-entropy clustering algorithm, pointed out that the maximum-entropy clustering algorithm is not new in essence, and constructed two examples to show that the iterative sequence given by the maximum-entropy clustering algorithm may not converge to a local minimum of its objective function, but a saddle point. Based on these results, our paper shows that the convergence theorem of maximum-entropy clustering algorithm put forward by Kenneth Rose et al. does not hold in general cases.
Towards Understanding Fatigue Disbond Growth via Cyclic Strain Energy
Pascoe, J.A.; Alderliesten, R.C.; Benedictus, R.
2014-01-01
The concept of relating fatigue disbond growth to the strain energy release rate (SERR) is critically examined. It is highlighted that the common practise of using only the maximum SERR or only the SERR range is insufficient to correctly characterize a load cycle. As crack growth requires energy, it
Transfer induced compressive strain in graphene
Larsen, Martin Benjamin Barbour Spanget; Mackenzie, David; Caridad, Jose
2014-01-01
We have used spatially resolved micro Raman spectroscopy to map the full width at half maximum (FWHM) of the graphene G-band and the 2D and G peak positions, for as-grown graphene on copper catalyst layers, for transferred CVD graphene and for micromechanically exfoliated graphene, in order...... to characterize the effects of a transfer process on graphene properties. Here we use the FWHM(G) as an indicator of the doping level of graphene, and the ratio of the shifts in the 2D and G bands as an indicator of strain. We find that the transfer process introduces an isotropic, spatially uniform, compressive...... strain in graphene, and increases the carrier concentration....
High strain rate behaviour of polypropylene microfoams
Gómez-del Río, T.; Garrido, M. A.; Rodríguez, J.; Arencón, D.; Martínez, A. B.
2012-08-01
Microcellular materials such as polypropylene foams are often used in protective applications and passive safety for packaging (electronic components, aeronautical structures, food, etc.) or personal safety (helmets, knee-pads, etc.). In such applications the foams which are used are often designed to absorb the maximum energy and are generally subjected to severe loadings involving high strain rates. The manufacture process to obtain polymeric microcellular foams is based on the polymer saturation with a supercritical gas, at high temperature and pressure. This method presents several advantages over the conventional injection moulding techniques which make it industrially feasible. However, the effect of processing conditions such as blowing agent, concentration and microfoaming time and/or temperature on the microstructure of the resulting microcellular polymer (density, cell size and geometry) is not yet set up. The compressive mechanical behaviour of several microcellular polypropylene foams has been investigated over a wide range of strain rates (0.001 to 3000 s-1) in order to show the effects of the processing parameters and strain rate on the mechanical properties. High strain rate tests were performed using a Split Hopkinson Pressure Bar apparatus (SHPB). Polypropylene and polyethylene-ethylene block copolymer foams of various densities were considered.
High strain rate behaviour of polypropylene microfoams
Martínez A.B.
2012-08-01
Full Text Available Microcellular materials such as polypropylene foams are often used in protective applications and passive safety for packaging (electronic components, aeronautical structures, food, etc. or personal safety (helmets, knee-pads, etc.. In such applications the foams which are used are often designed to absorb the maximum energy and are generally subjected to severe loadings involving high strain rates. The manufacture process to obtain polymeric microcellular foams is based on the polymer saturation with a supercritical gas, at high temperature and pressure. This method presents several advantages over the conventional injection moulding techniques which make it industrially feasible. However, the effect of processing conditions such as blowing agent, concentration and microfoaming time and/or temperature on the microstructure of the resulting microcellular polymer (density, cell size and geometry is not yet set up. The compressive mechanical behaviour of several microcellular polypropylene foams has been investigated over a wide range of strain rates (0.001 to 3000 s−1 in order to show the effects of the processing parameters and strain rate on the mechanical properties. High strain rate tests were performed using a Split Hopkinson Pressure Bar apparatus (SHPB. Polypropylene and polyethylene-ethylene block copolymer foams of various densities were considered.
Mang, H A; Jia, X
2013-08-01
It is shown that the determinant of the tangent stiffness matrix has a maximum in the prebuckling regime if and only if the determinant of a specific linear combination of the first and the third derivative of this matrix with respect to a dimensionless load factor vanishes. The mathematical tool for this proof is the so-called consistently linearized eigenproblem in the frame of the Finite Element Method. The physical meaning of the mentioned maximum is the one of a minimum of the percentage bending energy of the total strain energy. The paper provides mathematical and physical background knowledge on numerical results that were obtained 35 years ago.
Combining Experiments and Simulations Using the Maximum Entropy Principle
Boomsma, Wouter; Ferkinghoff-Borg, Jesper; Lindorff-Larsen, Kresten
2014-01-01
are not in quantitative agreement with experimental data. The principle of maximum entropy is a general procedure for constructing probability distributions in the light of new data, making it a natural tool in cases when an initial model provides results that are at odds with experiments. The number of maximum entropy...
49 CFR 174.86 - Maximum allowable operating speed.
2010-10-01
... 49 Transportation 2 2010-10-01 2010-10-01 false Maximum allowable operating speed. 174.86 Section... operating speed. (a) For molten metals and molten glass shipped in packagings other than those prescribed in § 173.247 of this subchapter, the maximum allowable operating speed may not exceed 24 km/hour (15...
Parametric optimization of thermoelectric elements footprint for maximum power generation
Rezania, A.; Rosendahl, Lasse; Yin, Hao
2014-01-01
The development studies in thermoelectric generator (TEG) systems are mostly disconnected to parametric optimization of the module components. In this study, optimum footprint ratio of n- and p-type thermoelectric (TE) elements is explored to achieve maximum power generation, maximum cost-perform...
30 CFR 56.19066 - Maximum riders in a conveyance.
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum riders in a conveyance. 56.19066 Section 56.19066 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Hoisting Procedures § 56.19066 Maximum riders in a conveyance. In shafts inclined over 45...
30 CFR 57.19066 - Maximum riders in a conveyance.
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum riders in a conveyance. 57.19066 Section 57.19066 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Hoisting Procedures § 57.19066 Maximum riders in a conveyance. In shafts inclined over 45...
Maximum Atmospheric Entry Angle for Specified Retrofire Impulse
T. N. Srivastava
1969-07-01
Full Text Available Maximum atmospheric entry angles for vehicles initially moving in elliptic orbits are investigated and it is shown that tangential retrofire impulse at the apogee results in the maximum entry angle. Equivalence of maximizing the entry angle and minimizing the retrofire impulse is also established.
5 CFR 838.711 - Maximum former spouse survivor annuity.
2010-01-01
... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Maximum former spouse survivor annuity... Orders Awarding Former Spouse Survivor Annuities Limitations on Survivor Annuities § 838.711 Maximum former spouse survivor annuity. (a) Under CSRS, payments under a court order may not exceed the...
46 CFR 151.45-6 - Maximum amount of cargo.
2010-10-01
... 46 Shipping 5 2010-10-01 2010-10-01 false Maximum amount of cargo. 151.45-6 Section 151.45-6 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Operations § 151.45-6 Maximum amount of cargo. (a)...
20 CFR 226.52 - Total annuity subject to maximum.
2010-04-01
... rate effective on the date the supplemental annuity begins, before any reduction for a private pension... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Total annuity subject to maximum. 226.52... COMPUTING EMPLOYEE, SPOUSE, AND DIVORCED SPOUSE ANNUITIES Railroad Retirement Family Maximum § 226.52...
Maximum-entropy clustering algorithm and its global convergence analysis
无
2001-01-01
Constructing a batch of differentiable entropy functions touniformly approximate an objective function by means of the maximum-entropy principle, a new clustering algorithm, called maximum-entropy clustering algorithm, is proposed based on optimization theory. This algorithm is a soft generalization of the hard C-means algorithm and possesses global convergence. Its relations with other clustering algorithms are discussed.
Distribution of maximum loss of fractional Brownian motion with drift
Çağlar, Mine; Vardar-Acar, Ceren
2013-01-01
In this paper, we find bounds on the distribution of the maximum loss of fractional Brownian motion with H >= 1/2 and derive estimates on its tail probability. Asymptotically, the tail of the distribution of maximum loss over [0, t] behaves like the tail of the marginal distribution at time t.
48 CFR 436.575 - Maximum workweek-construction schedule.
2010-10-01
...-construction schedule. 436.575 Section 436.575 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE... Maximum workweek-construction schedule. The contracting officer shall insert the clause at 452.236-75, Maximum Workweek-Construction Schedule, if the clause at FAR 52.236-15 is used and the contractor's...
30 CFR 57.5039 - Maximum permissible concentration.
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum permissible concentration. 57.5039... Maximum permissible concentration. Except as provided by standard § 57.5005, persons shall not be exposed to air containing concentrations of radon daughters exceeding 1.0 WL in active workings. ...
5 CFR 550.105 - Biweekly maximum earnings limitation.
2010-01-01
... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Biweekly maximum earnings limitation. 550.105 Section 550.105 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PAY ADMINISTRATION (GENERAL) Premium Pay Maximum Earnings Limitations § 550.105 Biweekly...
5 CFR 550.106 - Annual maximum earnings limitation.
2010-01-01
... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Annual maximum earnings limitation. 550.106 Section 550.106 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PAY ADMINISTRATION (GENERAL) Premium Pay Maximum Earnings Limitations § 550.106 Annual...
32 CFR 842.35 - Depreciation and maximum allowances.
2010-07-01
... 32 National Defense 6 2010-07-01 2010-07-01 false Depreciation and maximum allowances. 842.35... LITIGATION ADMINISTRATIVE CLAIMS Personnel Claims (31 U.S.C. 3701, 3721) § 842.35 Depreciation and maximum allowances. The military services have jointly established the “Allowance List-Depreciation Guide”...
Foulger, G.R.
1995-01-01
Given a uniform lithology and strain rate and a full seismic data set, the maximum depth of earthquakes may be viewed to a first order as an isotherm. These conditions are approached at the Hengill geothermal area, S. Iceland, a dominantly basaltic area. The temperature at which seismic failure ceases for the strain rates likely at the Hengill geothermal area is determined by analogy with oceanic crust, and is about 650 ?? 50??C. The topographies of the top and bottom of the seismogenic layer were mapped using 617 earthquakes. The thickness of the seismogenic layer is roughly constant and about 3 km. A shallow, aseismic, low-velocity volume within the spreading plate boundary that crosses the area occurs above the top of the seismogenic layer and is interpreted as an isolated body of partial melt. The base of the seismogenic layer has a maximum depth of about 6.5 km beneath the spreading axis and deepens to about 7 km beneath a transform zone in the south of the area. -from Author
Maximum Principles for Discrete and Semidiscrete Reaction-Diffusion Equation
Petr Stehlík
2015-01-01
Full Text Available We study reaction-diffusion equations with a general reaction function f on one-dimensional lattices with continuous or discrete time ux′ (or Δtux=k(ux-1-2ux+ux+1+f(ux, x∈Z. We prove weak and strong maximum and minimum principles for corresponding initial-boundary value problems. Whereas the maximum principles in the semidiscrete case (continuous time exhibit similar features to those of fully continuous reaction-diffusion model, in the discrete case the weak maximum principle holds for a smaller class of functions and the strong maximum principle is valid in a weaker sense. We describe in detail how the validity of maximum principles depends on the nonlinearity and the time step. We illustrate our results on the Nagumo equation with the bistable nonlinearity.
Experimental study on prediction model for maximum rebound ratio
LEI Wei-dong; TENG Jun; A.HEFNY; ZHAO Jian; GUAN Jiong
2007-01-01
The proposed prediction model for estimating the maximum rebound ratio was applied to a field explosion test, Mandai test in Singapore.The estimated possible maximum Deak particle velocities(PPVs)were compared with the field records.Three of the four available field-recorded PPVs lie exactly below the estimated possible maximum values as expected.while the fourth available field-recorded PPV lies close to and a bit higher than the estimated maximum possible PPV The comparison results show that the predicted PPVs from the proposed prediction model for the maximum rebound ratio match the field.recorded PPVs better than those from two empirical formulae.The very good agreement between the estimated and field-recorded values validates the proposed prediction model for estimating PPV in a rock mass with a set of ipints due to application of a two dimensional compressional wave at the boundary of a tunnel or a borehole.
H.Y.Gao; Q.Sun
2003-01-01
The paper deals with different plastic deformation behavior of electroformed copper liner of shaped charge,depormed at high strain rate(about 1×107s-1) and normal strain rate (4×10-4s-1).The crystallographic orientation distribution of grains in recovered slugs which had undergone high-strain-rate plastic deformation during ex-plosive detonation was investigated by electron backscattering Kikuchi pattern tech-nique.Cellualar structures formed by tangled disocations and sub-grain boundaries consisting of dislocation arrays were detected in the recovered slugs.Some twins and slip dislocations were observed in specimen deformed at normal strain rate.It was found that dynamic recovery and recrystallization take place during high-strain-rate deformation due to the temperature rising,whereas the conventional slip mechanism operates during deformation at normal strain rate.
76 FR 52871 - Pseudomonas fluorescens Strain CL145A; Exemption From the Requirement of a Tolerance
2011-08-24
... AGENCY 40 CFR Part 180 Pseudomonas fluorescens Strain CL145A; Exemption From the Requirement of a... establishes an exemption from the requirement of a tolerance for residues of Pseudomonas fluorescens strain... eliminates the need to establish a maximum permissible level for residues of Pseudomonas fluorescens...
Thomas, Catherine [Paris-11 Univ., 91 Orsay (France)
2000-01-19
Theoretical models have shown that the maximum magnetic field in radio frequency superconducting cavities is the superheating field H{sub sh}. For niobium, H{sub sh} is 25 - 30% higher than the thermodynamical H{sub c} field: H{sub sh} within (240 - 274) mT. However, the maximum magnetic field observed so far is in the range H{sub c,max} = 152 mT for the best 1.3 GHz Nb cavities. This field is lower than the critical field H{sub c1} above which the superconductor breaks up into divided normal and superconducting zones (H{sub c1}{<=}H{sub c}). Thermal instabilities are responsible for this low value. In order to reach H{sub sh} before thermal breakdown, high power short pulses are used. The cavity needs then to be strongly over-coupled. The dedicated test bed has been built from the collaboration between Istituto Nazionale di Fisica Nucleare (INFN) - Sezione di Genoa, and the Service d'Etudes et Realisation d'Accelerateurs (SERA) of Laboratoire de l'Accelerateur Lineaire (LAL). The maximum magnetic field, H{sub rf,max}, measurements on INFN cavities give lower results than the theoretical speculations and are in agreement with previous results. The superheating magnetic fields is linked to the magnetic penetration depth. This superconducting characteristic length can be used to determine the quality of niobium through the ratio between the resistivity measured at 300 K and 4.2 K in the normal conducting state (RRR). Results have been compared to previous ones and agree pretty well. They show that the RRR measured on cavities is superficial and lower than the RRR measured on samples which concerns the volume. (author)
Strain distribution of strips with spherical inclusion during cold rolling
YU Hai-liang; BI Hong-yun; LIU Xiang-hua; TU Yan-feng
2008-01-01
The deformation of 304 stainless steel strips with a spherical inclusion during cold rolling was simulated by 3D finite element method, and the strain distribution was calculated for a variety of the material attribution of inclusion (hard inclusions and soft inclusions) and the inclusion size (10, 20, 30, 40, and 50 μm). During rolling, the strain in front of inclusion is larger than that in rear of inclusion for both the hard and soft inclusions. For hard inclusions, the strain in front and rear of inclusions is larger than that of inclusions, and the maximum and minimum strains increase with the increase of inclusion diameter (from 10 μm to 50 μm). For soft inclusions, the strain in front and rear of inclusions is smaller than that of inclusions, and the maximum and minimum strains decrease with the increase of inclusion sizes when the inclusion diameter is larger than 20 μm but increase when the inclusion diameter is smaller than 20 μm. Finally, the relationship between the inclusion deformation and the crack generation was discussed.
Haberman, Shelby J.
2004-01-01
The usefulness of joint and conditional maximum-likelihood is considered for the Rasch model under realistic testing conditions in which the number of examinees is very large and the number is items is relatively large. Conditions for consistency and asymptotic normality are explored, effects of model error are investigated, measures of prediction…
Environmental effects of DFDF normal operation
Park, J. J.; Lee, H. H.; Shin, J. M.; Kim, J. H.; Yang, M. S. [KAERI, Taejon (Korea, Republic of)
2003-07-01
A DUPIC nuclear fuel is a newly developed fuel for CANDU reactors based on the concept of refabrication of spent PWR fuel by a dry process. Because a spent PWR fuel, a highly radioactive material, is used as a starting material, the experimental verification of DUPIC nuclear fuel fabrication requires an appropriate facility which should satisfy engineering requirements and guarantees safe operation. DUPIC nuclear fuel development team modified M6 hot-cell in IMEF to construct the dedicated facility(DFDF) for the experiment. The experiment with spent PWR fuel have been conducted since January of 2000. Environmental effects of DFDF normal operation have been investigated when DUPIC nuclear fuel is fabricated with the maximum capacity of 50 kg U/yr. The analysis results of the radiological safety of DFDF facility have shown that both national regulation limit and IMEF design criteria are satisfied.
Well Conductor Strain Monitoring
2014-05-06
comply with a collection of information if it does not display a currently valid OMB control number. 1. REPORT DATE JUL 2014 2. REPORT TYPE 3. DATES...849,429; filed on June 26, 2013 by the inventor, Dr. Anthony Ruffa and entitled “ SUBSEA WELL CONDUCTOR STRAIN MONITORING”. STATEMENT OF
Monitoring dyke injection and strain field evolution using shear-wave splitting.
Kendall, J.-M.; Verdon, J. P.; Keir, D.; Baird, A.
2012-04-01
Magma storage and dyke injection in the shallow crust is a fundamental process in rifting and volcanic environments. The dyking will tend to align with directions of maximum compressive stress, and the associated aligned fracturing and melt migration provides a very effective means of generating seismic anisotropy. Observations of shear-wave splitting provide one of the most unambiguous indicators of such anisotropy. As such, shear-wave splitting can be used to monitor the evolving strain field in volcanic and rifting environments. Here we apply lessons learned from monitoring fracture propagation during the hydraulic stimulation of tight-gas reservoirs. In a number of experiments we observe spatial and temporal variations in shear-wave splitting magnitude and orientation. We invert shear-wave observations for fracture properties, including the tangential and normal compliance, the ratio of which is a good indicator of fluid flow and permeability. Frequency dependent affects can be also used to indicate the length scales of the causative cracks or fractures. We apply these insights to microseismic data recently acquired across the volcanically active Afar triple junction in Ethiopia. The pattern of S-wave splitting in Afar is best explained by anisotropy from deformation-related structures, with the dramatic change in splitting parameters into the rift axis from the increased density of dyke-induced faulting combined with a contribution from oriented melt pockets near volcanic centres. The results help in our understanding of the role of melt in strain accommodation in rifting and volcanic environments.
Development of High Cordycepin-Producing Cordyceps militaris Strains.
Kang, Naru; Lee, Hyun-Hee; Park, Inmyoung; Seo, Young-Su
2017-03-01
Cordyceps militaris, known as Dong-Chong-Xia-Cao, produces the most cordycepin among Cordyceps species and can be cultured artificially. For these reasons, C. militaris is widely used as herb or functional food in the East Asia. In this study, we developed a new strain of C. militaris that produces higher cordycepin content than parent strains through mating-based sexual reproduction. Twenty parent strains were collected and identified as C. militaris based on internal trasncrived spacer and rDNA sequences. Seven single spores of MAT 1-1 idiomorph and five single spores of MAT 1-2 idiomorph were isolated from 12 parent strains. When 35 combinations were mated on the brown rice medium with the isolated single spores, eight combinations formed a stroma with a normal perithecia and confirmed mated strains. High pressure liquid chromatography analysis showed that mated strain KSP8 produced the most cordycepin in all the media among all the tested strains. This result showed due to genetic recombination occurring during the sexual reproduction of C. militaris. The development of C. militaris strain with increased cordycepin content by this approach can help not only to generate new C. militaris strains, but also to contribute to the health food or medicine industry.
Normal family of quasimeromorphic mappings
SUN; Daochun(孙道椿); YANG; Lo(杨乐)
2003-01-01
The more general quasimeromorphic mappings are studied with the geometric method. The necessary and sufficient conditions for the normality of the family of quasimeromorphic mappings are discussed. We proved two inequalities on the covering surface and obtained some normal criteria on quasimeromorphic mappings with them. Obviously, these criteria hold for meromorphic functions.
Surfaces parametrised by the normals
Gravesen, Jens
2007-01-01
the origin to the tangent plane and the surface is simply considered as the envelope of its family of tangent planes. Suppose we are given points and normals and we want a C^k-surface interpolating these data. The data gives the value and gradients of the support function at certain points (the given normals...
Rational Normalization of Concentration Measures.
Bonckaert, P.; Egghe, L.
1991-01-01
Discusses normalization features of good concentration measures and extends the range of values of concentration measures that are population-size-independent. Rational normalization is described, and mathematical formulas for the coefficient of variation, Pratt's measure, the Gini index, Theil's measure, and Atkinson's indices are explained. (14…
Influence of inherent strain on the curie temperature of rare earth ion-doped bismuth vanadate
Sooryanarayana, K; Row, TNG; R. Somashekar; Varma, KBR
1998-01-01
X-ray line broadening is found to be an effective parameter to estimate the strain associated with rare earth ion (Gd3+)-doped polycrystalline bismuth vanadate(Bi2VO5.5). The strain increases with increasing Gd3+ concentration. It is anisotropic and found to be maximum in (111) plane. The Curie temperature which is known to decrease with increase in the rare earth ion concentration in these compounds is correlated with increase in strain.
Spectra of fiber Bragg grating and long period fiber grating undergoing linear and quadratic strain
YUAN Yin-quan; LIANG Lei; ZHANG Dong-eheng
2009-01-01
The effects of linear and quadratic strain on the reflective spectrum of FBG and the transmission spectrum of LPFG have been numerically investigated based on the coupled -mode equations. The results show that for the FBG or LPFG undergo-ing only linear strain, the reflection or transmission spectrum is symmetrical about its central wavelength, the dependence relationships of the central wavelength shift, full-width-at-half-maximum, peak intensity upon the strain gradient have been obtained.
Shrinkage strain – Rates study of dental composites based on (BisGMA/TEGDMA monomers
A. Amirouche-Korichi
2017-02-01
The results revealed that the fraction of opaque filler had no significant effect on the shrinkage strain-rate and on the time at maximum shrinkage strain-rate but these two parameters are closely related to the monomer ratios and viscosity of the organic matrix. The results have confirmed the proportionality of the shrinkage strain and DC and showed that the filler contents and monomer ratios would not affect this proportionality.
On the relationship between disbond growth and the release of strain energy
Pascoe, J.A.; Alderliesten, R.C.; Benedictus, R.
2014-01-01
Current prediction methods for growth of disbonds under fatigue loading are generally based on a correlation with either the maximum strain energy release rate (SERR) or the SERR range. This paper highlights some issues with this approach. In particular, it is argued that the maximum SERR or the SE
Near tip strain evolution of a growing fatigue crack
M.-L. Zhu
2015-07-01
Full Text Available Near tip full-field strains in a growing fatigue crack have been studied in situ using the Digital Image Correlation (DIC technique in a compact tension specimen of stainless steel 316L under tension-tension cyclic loading. An error analysis of displacements and strains has been carried out, and the results show that the precision of displacements and strains in the wake of the crack is worse than that in front of the crack. A method for the determination of crack tip location is proposed for the DIC analysis. Strain ratchetting is observed ahead of the growing fatigue crack tip and found to be dependent on the distance to the crack tip; whilst normal strains appear to stabilise behind the crack tip.
Normal BGG solutions and polynomials
Cap, A; Hammerl, M
2012-01-01
First BGG operators are a large class of overdetermined linear differential operators intrinsically associated to a parabolic geometry on a manifold. The corresponding equations include those controlling infinitesimal automorphisms, higher symmetries, and many other widely studied PDE of geometric origin. The machinery of BGG sequences also singles out a subclass of solutions called normal solutions. These correspond to parallel tractor fields and hence to (certain) holonomy reductions of the canonical normal Cartan connection. Using the normal Cartan connection, we define a special class of local frames for any natural vector bundle associated to a parabolic geometry. We then prove that the coefficient functions of any normal solution of a first BGG operator with respect to such a frame are polynomials in the normal coordinates of the parabolic geometry. A bound on the degree of these polynomials in terms of representation theory data is derived. For geometries locally isomorphic to the homogeneous model of ...
2010-07-01
... as specified in 40 CFR 1065.610. This is the maximum in-use engine speed used for calculating the NOX... procedures of 40 CFR part 1065, based on the manufacturer's design and production specifications for the..., power density, and maximum in-use engine speed. 1042.140 Section 1042.140 Protection of...
Sreenivasulu Tadakaluru
2014-01-01
Full Text Available Conventional metallic strain sensors are flexible, but they can sustain maximum strains of only ~5%, so there is a need for sensors that can bear high strains for multifunctional applications. In this study, we report stretchable and flexible high-strain sensors that consist of entangled and randomly distributed multiwall carbon nanotubes or graphite flakes on a natural rubber substrate. Carbon nanotubes/graphite flakes were sandwiched in natural rubber to produce these high-strain sensors. Using field emission scanning electron microscopy, the morphology of the films for both the carbon nanotube and graphite sensors were assessed under different strain conditions (0% and 400% strain. As the strain was increased, the films fractured, resulting in an increase in the electrical resistance of the sensor; this change was reversible. Strains of up to 246% (graphite sensor and 620% (carbon nanotube sensor were measured; these values are respectively ~50 and ~120 times greater than those of conventional metallic strain sensors.
Tadakaluru, Sreenivasulu; Thongsuwan, Wiradej; Singjai, Pisith
2014-01-06
Conventional metallic strain sensors are flexible, but they can sustain maximum strains of only ~5%, so there is a need for sensors that can bear high strains for multifunctional applications. In this study, we report stretchable and flexible high-strain sensors that consist of entangled and randomly distributed multiwall carbon nanotubes or graphite flakes on a natural rubber substrate. Carbon nanotubes/graphite flakes were sandwiched in natural rubber to produce these high-strain sensors. Using field emission scanning electron microscopy, the morphology of the films for both the carbon nanotube and graphite sensors were assessed under different strain conditions (0% and 400% strain). As the strain was increased, the films fractured, resulting in an increase in the electrical resistance of the sensor; this change was reversible. Strains of up to 246% (graphite sensor) and 620% (carbon nanotube sensor) were measured; these values are respectively ~50 and ~120 times greater than those of conventional metallic strain sensors.
Multi-digit maximum voluntary torque production on a circular object
SHIM, JAE KUN; HUANG, JUNFENG; HOOKE, ALEXANDER W.; LATSH, MARK L.; ZATSIORSKY, VLADIMIR M.
2010-01-01
Individual digit-tip forces and moments during torque production on a mechanically fixed circular object were studied. During the experiments, subjects positioned each digit on a 6-dimensional force/moment sensor attached to a circular handle and produced a maximum voluntary torque on the handle. The torque direction and the orientation of the torque axis were varied. From this study, it is concluded that: (1) the maximum torque in the closing (clockwise) direction was larger than in the opening (counter clockwise) direction; (2) the thumb and little finger had the largest and the smallest share of both total normal force and total moment, respectively; (3) the sharing of total moment between individual digits was not affected by the orientation of the torque axis or by the torque direction, while the sharing of total normal force between the individual digit varied with torque direction; (4) the normal force safety margins were largest and smallest in the thumb and little finger, respectively. PMID:17454086
Aparna Balakrishna
2013-10-01
Full Text Available The aim of this work was to study the probiotic-related characteristics of four strains of bacteria isolated from the normal flora of the guppy, Poecilia reticulata. In vitro results showed that the strains, namely, MBTU_PB1, MBTU_PB2, MBTU_PB3 and MBTU_PB4 had higher adhesion abilities than the tested indicator strains. However, an association between the cell-surface hydrophobicity and the ability to adhere to the intestinal mucus was not observed for these strains. Further, the selected strains were strongly autoaggregating (autoaggregation percentage ≥ 80 and also showed strain-specific coaggregation abilities with the tested indicator strains.
Cardiac biplane strain imaging: initial in vivo experience
Lopata, R G P; Nillesen, M M; Thijssen, J M; De Korte, C L [Clinical Physics Laboratory, Radboud University Nijmegen Medical Centre, Nijmegen (Netherlands); Verrijp, C N; Lammens, M M Y; Van der Laak, J A W M [Department of Pathology, Radboud University Nijmegen Medical Centre, Nijmegen (Netherlands); Singh, S K; Van Wetten, H B [Department of Cardiothoracic Surgery, Radboud University Nijmegen Medical Centre, Nijmegen (Netherlands); Kapusta, L [Pediatric Cardiology, Department of Pediatrics, Radboud University Nijmegen Medical Centre, Nijmegen (Netherlands)], E-mail: R.Lopata@cukz.umcn.nl
2010-02-21
In this study, first we propose a biplane strain imaging method using a commercial ultrasound system, yielding estimation of the strain in three orthogonal directions. Secondly, an animal model of a child's heart was introduced that is suitable to simulate congenital heart disease and was used to test the method in vivo. The proposed approach can serve as a framework to monitor the development of cardiac hypertrophy and fibrosis. A 2D strain estimation technique using radio frequency (RF) ultrasound data was applied. Biplane image acquisition was performed at a relatively low frame rate (<100 Hz) using a commercial platform with an RF interface. For testing the method in vivo, biplane image sequences of the heart were recorded during the cardiac cycle in four dogs with an aortic stenosis. Initial results reveal the feasibility of measuring large radial, circumferential and longitudinal cumulative strain (up to 70%) at a frame rate of 100 Hz. Mean radial strain curves of a manually segmented region-of-interest in the infero-lateral wall show excellent correlation between the measured strain curves acquired in two perpendicular planes. Furthermore, the results show the feasibility and reproducibility of assessing radial, circumferential and longitudinal strains simultaneously. In this preliminary study, three beagles developed an elevated pressure gradient over the aortic valve ({delta}p: 100-200 mmHg) and myocardial hypertrophy. One dog did not develop any sign of hypertrophy ({delta}p = 20 mmHg). Initial strain (rate) results showed that the maximum strain (rate) decreased with increasing valvular stenosis (-50%), which is in accordance with previous studies. Histological findings corroborated these results and showed an increase in fibrotic tissue for the hearts with larger pressure gradients (100, 200 mmHg), as well as lower strain and strain rate values.
Cardiac biplane strain imaging: initial in vivo experience
Lopata, R. G. P.; Nillesen, M. M.; Verrijp, C. N.; Singh, S. K.; Lammens, M. M. Y.; van der Laak, J. A. W. M.; van Wetten, H. B.; Thijssen, J. M.; Kapusta, L.; de Korte, C. L.
2010-02-01
In this study, first we propose a biplane strain imaging method using a commercial ultrasound system, yielding estimation of the strain in three orthogonal directions. Secondly, an animal model of a child's heart was introduced that is suitable to simulate congenital heart disease and was used to test the method in vivo. The proposed approach can serve as a framework to monitor the development of cardiac hypertrophy and fibrosis. A 2D strain estimation technique using radio frequency (RF) ultrasound data was applied. Biplane image acquisition was performed at a relatively low frame rate (cardiac cycle in four dogs with an aortic stenosis. Initial results reveal the feasibility of measuring large radial, circumferential and longitudinal cumulative strain (up to 70%) at a frame rate of 100 Hz. Mean radial strain curves of a manually segmented region-of-interest in the infero-lateral wall show excellent correlation between the measured strain curves acquired in two perpendicular planes. Furthermore, the results show the feasibility and reproducibility of assessing radial, circumferential and longitudinal strains simultaneously. In this preliminary study, three beagles developed an elevated pressure gradient over the aortic valve (Δp: 100-200 mmHg) and myocardial hypertrophy. One dog did not develop any sign of hypertrophy (Δp = 20 mmHg). Initial strain (rate) results showed that the maximum strain (rate) decreased with increasing valvular stenosis (-50%), which is in accordance with previous studies. Histological findings corroborated these results and showed an increase in fibrotic tissue for the hearts with larger pressure gradients (100, 200 mmHg), as well as lower strain and strain rate values.
Tripling the maximum imaging depth with third-harmonic generation microscopy.
Yildirim, Murat; Durr, Nicholas; Ben-Yakar, Adela
2015-09-01
The growing interest in performing high-resolution, deep-tissue imaging has galvanized the use of longer excitation wavelengths and three-photon-based techniques in nonlinear imaging modalities. This study presents a threefold improvement in maximum imaging depth of ex vivo porcine vocal folds using third-harmonic generation (THG) microscopy at 1552-nm excitation wavelength compared to two-photon microscopy (TPM) at 776-nm excitation wavelength. The experimental, analytical, and Monte Carlo simulation results reveal that THG improves the maximum imaging depth observed in TPM significantly from 140 to 420 μm in a highly scattered medium, reaching the expected theoretical imaging depth of seven extinction lengths. This value almost doubles the previously reported normalized imaging depths of 3.5 to 4.5 extinction lengths using three-photon-based imaging modalities. Since tissue absorption is substantial at the excitation wavelength of 1552 nm, this study assesses the tissue thermal damage during imaging by obtaining the depth-resolved temperature distribution through a numerical simulation incorporating an experimentally obtained thermal relaxation time (τ). By shuttering the laser for a period of 2τ, the numerical algorithm estimates a maximum temperature increase of ∼2°C at the maximum imaging depth of 420 μm. The paper demonstrates that THG imaging using 1552 nm as an illumination wavelength with effective thermal management proves to be a powerful deep imaging modality for highly scattering and absorbing tissues, such as scarred vocal folds.
Mehmet Ali Elbey
2012-12-01
Full Text Available Objectives: The aim of the this study was to investigatethe relationship between the degree of mitral regurgitation(MR, left ventricular (LV dysfunction determined bystrain (S/strain rate (SR imaging and plasma brain natriureticpeptide (BNP levels.Materials and methods: This is an observational crosssectionalstudy which included 31 consecutive patients(15[48.4%] male who had applied to our outpatient clinicsand diagnosed as mitral regurgitation and 25 (12[48.0%] male healthy persons as control subjects. Themitral regurgitation patients were divided into two groups:those with moderate MR (n=14[45.2%] and those withsevere MR (n=17[54.8%], and maximum strain / strainrate measurements of left ventricular wall segments andplasma brain natriuretic peptide levels were determined inthese two groups and controls.Results: S/SR values of all wall segments of left ventriclewere found to be decreased in patient with severe MRwhen compared with the control subjects and patientswith moderate MR (p<0.001.Conclusions: Although left ventricle functions with conventionalechocardiography in patients with mitral valveregurgitation were normal, subclinic deteriorations ofleft ventricle were detected in patients with severe mitralvalve regurgitation. J Clin Exp Invest 2012; 3 (4: 451-456Key words: strain/strain rate, echocardiography, mitralregurgitation, left ventricular functions
Determination of tangential and normal components of oral forces
Estevam Barbosa de Las Casas
2007-02-01
Full Text Available Oral forces applied to human teeth during biting and mastication are normally described in the literature only in terms of their axial components. The purpose of this study was to fully determine the spatial characteristics of the oral resultant force - its normal and tangential components - for a given individual. A load cell was especially manufactured to measure oral force and was temporarily implanted as a prosthetic device in the dental arch of a volunteer, replacing his missing upper first molar. The mastication and occlusion tests were carried out in such a way the cell should withstand the loads applied to the molar, and its state of strain was recorded by strain gauges attached to it. Based on the results of these tests and using balance equations, normal and tangential components of the resultant oral force were determined. For direct occlusion, without interposition any obstacle between cusps, a peak normal force of 135 N was recorded simultaneously to a tangential force of 44 N. For mastication of biscuits, a peak normal force of 133 N and a tangential force of 39 N were obtained.
Ichikawa, Shoji; Austin, Anthony M; Gray, Amie K; Allen, Matthew R; Econs, Michael J
2011-01-01
...) and infertility in males. To test the effect of dietary phosphate intake on their phenotype, Galnt3 knockout mice were generated in the C57BL/6J strain and fed various phosphate diets: 0.1% (low), 0.3% (low normal), 0.6% (normal), and 1.65% (high...
Proteomic analysis of normal murine brain parts.
Taraslia, Vasiliki K; Kouskoukis, Alexandros; Anagnostopoulos, Athanasios K; Stravopodis, Dimitrios J; Margaritis, Lukas H; Tsangaris, George Th
2013-01-01
Murine brain is an excellent tool for studying protein expression and brain function in mammals. Although mice are an extensively used model to recapitulate various pathological conditions, the proteome of the normal mouse brain has not been yet reported. In the present study, we identified the total proteins of different parts of the brain of CB7BL/6 mice, a widely used strain, by applying proteomic methodologies. The adult mouse brain was dissected anatomically into the following regions: frontal cortex, olfactory bulb, hippocampus, midbrain, cerebellum, hypothalamus and medulla. Total protein extracts of these regions were separated by two-dimensional gel electrophoresis and analyzed by matrix-assisted laser desorption ionisation time-of-flight mass spectrometry, following in-gel digestion with trypsin. Protein identification was carried out by peptide mass fingerprint. Thus, 515 different single-gene products were identified in total, 54 expressed specifically in the olfactory bulb, 62 in the hippocampus, 36 in the frontal cortex, five in the cerebellum, nine in the midbrain, eight in the hypothamamus and 10 in the medulla. The majority of the proteins were enzymes, structural proteins and transporters. Moreover, the distribution of these molecules appears to exhibit direct correlation with the function of the brain regions where they were expressed. This study leads to the complete characterization of the normal mouse brain proteome as well as the protein expression profile of the different brain regions. These results will aid in addressing unmet scientific needs regarding physiological and pathological brain functions.
Stone, Wesley W.; Gilliom, Robert J.; Crawford, Charles G.
2008-01-01
Regression models were developed for predicting annual maximum and selected annual maximum moving-average concentrations of atrazine in streams using the Watershed Regressions for Pesticides (WARP) methodology developed by the National Water-Quality Assessment Program (NAWQA) of the U.S. Geological Survey (USGS). The current effort builds on the original WARP models, which were based on the annual mean and selected percentiles of the annual frequency distribution of atrazine concentrations. Estimates of annual maximum and annual maximum moving-average concentrations for selected durations are needed to characterize the levels of atrazine and other pesticides for comparison to specific water-quality benchmarks for evaluation of potential concerns regarding human health or aquatic life. Separate regression models were derived for the annual maximum and annual maximum 21-day, 60-day, and 90-day moving-average concentrations. Development of the regression models used the same explanatory variables, transformations, model development data, model validation data, and regression methods as those used in the original development of WARP. The models accounted for 72 to 75 percent of the variability in the concentration statistics among the 112 sampling sites used for model development. Predicted concentration statistics from the four models were within a factor of 10 of the observed concentration statistics for most of the model development and validation sites. Overall, performance of the models for the development and validation sites supports the application of the WARP models for predicting annual maximum and selected annual maximum moving-average atrazine concentration in streams and provides a framework to interpret the predictions in terms of uncertainty. For streams with inadequate direct measurements of atrazine concentrations, the WARP model predictions for the annual maximum and the annual maximum moving-average atrazine concentrations can be used to characterize
Maximum Likelihood Estimation of the Identification Parameters and Its Correction
无
2002-01-01
By taking the subsequence out of the input-output sequence of a system polluted by white noise, anindependent observation sequence and its probability density are obtained and then a maximum likelihood estimation of theidentification parameters is given. In order to decrease the asymptotic error, a corrector of maximum likelihood (CML)estimation with its recursive algorithm is given. It has been proved that the corrector has smaller asymptotic error thanthe least square methods. A simulation example shows that the corrector of maximum likelihood estimation is of higherapproximating precision to the true parameters than the least square methods.
Maximum frequency of the decametric radiation from Jupiter
Barrow, C. H.; Alexander, J. K.
1980-01-01
The upper frequency limits of Jupiter's decametric radio emission are found to be essentially the same when observed from the earth or, with considerably higher sensitivity, from the Voyager spacecraft close to Jupiter. This suggests that the maximum frequency is a real cut-off corresponding to a maximum gyrofrequency of about 38-40 MHz at Jupiter. It no longer appears to be necessary to specify different cut-off frequencies for the Io and non-Io emission as the maximum frequencies are roughly the same in each case.
Minakuchi, Shu; Sanada, Teruhisa; Takeda, Nobuo; Mitani, Shinji; Mizutani, Tadahito; Sasaki, Yoshinobu; Shinozaki, Keisuke
2014-05-01
Thermal strain significantly affects stability of fiber optic gyroscope (FOG) performance. This study investigates thermal strain development in a lightweight carbon fiber reinforced plastic (CFRP) FOG under thermal vacuum condition simulating space environment. First, we measure thermal strain distribution along an optical fiber in a CFRP FOG using a Brillouin-based high-spatial resolution system. The key strain profile is clarified and the strain development is simulated using finite element analysis. Finally, several constituent materials for FOG are quantitatively compared from the aspect of the maximum thermal strain and the density, confirming the clear advantage of CFRP.
Yuan, Scott Wu; Stefani, Alessio; Bang, Ole
2012-01-01
We demonstrate stable wavelength tunable inscription of polymer optical fiber Bragg gratings (FBGs). By straining the fiber during FBG inscription, we linearly tune the center wavelength over 7 nm with less than 1% strain. Above 1% strain, the tuning curve saturates and we show a maximum tuning...... of 12 nm with 2.25% strain. We use this inscription method to fabricate a dual-FBG strain sensor in a poly (methyl methacrylate) single-mode microstructured polymer optical fiber and demonstrate temperature compensated strain sensing around 850 nm....
Hussain Mutlag, Ammar; Mohamed, Azah; Shareef, Hussain
2016-03-01
Maximum power point tracking (MPPT) is normally required to improve the performance of photovoltaic (PV) systems. This paper presents artificial intelligent-based maximum power point tracking (AI-MPPT) by considering three artificial intelligent techniques, namely, artificial neural network (ANN), adaptive neuro fuzzy inference system with seven triangular fuzzy sets (7-tri), and adaptive neuro fuzzy inference system with seven gbell fuzzy sets. The AI-MPPT is designed for the 25 SolarTIFSTF-120P6 PV panels, with the capacity of 3 kW peak. A complete PV system is modelled using 300,000 data samples and simulated in the MATLAB/SIMULINK. The AI-MPPT has been tested under real environmental conditions for two days from 8 am to 18 pm. The results showed that the ANN based MPPT gives the most accurate performance and then followed by the 7-tri-based MPPT.
Strain localization and damage development in 2060 alloy during bending
Xiao Jin; Bao-qin Fu; Cheng-lu Zhang; Wei Liu
2015-01-01
The microstructure evolution and damage development of the third-generation Al–Li alloy 2060 (T8) were studied using in situ bending tests. Specimens were loaded with a series of punches of different radii, and the microstructure evolution was studied by scanning electron microscopy, electron backscatter diffraction, and digital image correlation (DIC) methods. The evolution of the microscopic fracture strain distribution and microstructure in 2060 alloy during bending was characterized, where the dispersion distribution of precipitates was recorded by backscattered electron imaging and later inputted into a DIC system for strain calculations. The experimental results showed that strain localization in the free surface of bent specimens induced damage to the microstructure. The region of crack initiation lies on the free surface with maximum strain, and the shear crack propagates along the macro-shear band in the early stages of bending. Crack propagation in the later stages was interpreted on the basis of the conventional mechanism of ductile fracture.
Hairy roots are more sensitive to auxin than normal roots
Shen, Wen Hui; Petit, Annik; Guern, Jean; Tempé, Jacques
1988-01-01
Responses to auxin of Lotus corniculatus root tips or protoplasts transformed by Agrobacterium rhizogenes strains 15834 and 8196 were compared to those of their normal counterparts. Three different types of experiments were performed, involving long-term, medium-term, or short-term responses to a synthetic auxin, 1-naphthaleneacetic acid. Root tip elongation, proton excretion by root tips, and transmembrane electrical potential difference of root protoplasts were measured as a function of exo...
Normal families of meromorphic functions
MA Chao-wei; WANG Yong-jun
2007-01-01
A normal theorem concerning meromorphic functions sharing values was proved with the method of Zalcman-Pang.The theorem is as follows.If for each f in F,all zeros of f-a have multiplicity at least k(k≥2),f and its k-th derivative function share a,and if f=b whenever its k-th denvative equal b,then F is normal in D.This theorem improved the result of Chen and Fang[Chen HH,Fang ML,Shared values and normal families of meromorphic functions,Journal of Mathematical Analysis and Applications,2001,260:124-1 32].
Ratnasamy Muniandy
2006-01-01
Full Text Available Stone Matrix Asphalt (SMA is a gap-graded mix that is gaining popularity worldwide. Generally, gap graded mixes are thought to be weak in fatigue resistance. In this study, cellulose fibers were pre-blended in PG64-22 binder with fiber proportions of 0.2%, 0.4%, 0.6%, 0.8% and 1.0% by weight of aggregates. The fiber-modified binder showed improved rheological properties and showed that the PG64-22 binder can be modified and raised to PG70-22 grade. The cellulose oil palm fiber (COPF was found to improve the diameteral fatigue performance of SMA design mix. The fatigue life increased to a maximum at a fiber content of about 0.6%, whilst the tensile stress and stiffness also showed a similar trend in performance. The initial strains of the mix were lowest at a fiber content of 0.6%.
Stress, strain rate and anisotropy in Kyushu, Japan
Savage, M. K.; Aoki, Y.; Unglert, K.; Ohkura, T.; Umakoshi, K.; Shimizu, H.; Iguchi, M.; Tameguri, T.; Ohminato, T.; Mori, J.
2016-04-01
Seismic anisotropy, the directional dependence of wave speeds, may be caused by stress-oriented cracks or by strain-oriented minerals, yet few studies have quantitatively compared anisotropy to stress and strain over large regions. Here we compare crustal stress and strain rates on the Island of Kyushu, Japan, as measured from inversions of focal mechanisms, GPS and shear wave splitting. Over 85,000 shear wave splitting measurements from local and regional earthquakes are obtained from the NIED network between 2004 and 2012, and on Aso, Sakurajima, Kirishima and Unzen volcano networks. Strain rate measurements are made from the Japanese Geonet stations. JMA-determined S arrival times processed with the MFAST shear wave splitting code measure fast polarisations (Φ), related to the orientation of the anisotropic medium and time delays (dt), related to the path length and the percent anisotropy. We apply the TESSA 2-D delay time tomography and spatial averaging code to the highest quality events, which have nearly vertical incidence angles, separating the 3455 shallow (depth = 40 km) earthquakes. Using square grids with 30 km sides for all the inversions, the best correlations are observed between splitting from shallow earthquakes and stress. Axes of maximum horizontal stress (SHmax) and Φ correlate with a coefficient c of 0.56, significant at the 99% confidence level. Their mean difference is 31.9°. Axes of maximum compressional strain rate and SHmax are also well aligned, with an average difference of 28°, but they do not correlate with each other, meaning that where they differ, the difference is not systematic. Anisotropy strength is negatively correlated with the stress ratio parameter determined from focal mechanism inversion (c = - 0.64; significant at the 99% confidence level). The anisotropy and stress results are consistent with stress-aligned microcracks in the crust in a dominantly strike-slip regime. Eigenvalues of maximum horizontal strain rate
Permeability of normal versus carious dentin.
Pashley, E L; Talman, R; Horner, J A; Pashley, D H
1991-10-01
Although a number of reports have been published demonstrating that carious dentin is less permeable than normal dentin, these reports have been qualitative rather than quantitative. The purpose of this in vitro study was to apply a quantitative technique to the study of the permeability of carious human teeth before and after excavation, before and after removal of the smear layer and before and after preparation of a control cavity of similar size and depth in normal dentin subjected to the same measurements, for comparative purposes. Dentin permeability was measured as a hydraulic conductance. The permeability values measured at each step in the protocol were expressed as a percent of the maximum permeability of both cavities, permitting each tooth the serve as its own control. Carious lesions exhibited a slight degree of permeability (2.3 +/- 0.6% of controls) which remained unchanged after excavation of the lesions. Removal of the smear layer in the excavated carious lesions increased the permeability significantly to 6.9 +/- 3.2%. Preparation of a control cavity of the same area and depth increased the permeability slightly. Removal of its smear layer increased the permeability of the dentin 91%. These results confirm previous qualitative studies that carious dentin, even after excavation and removal of the smear layer has a very low permeability.
Bini, Donato; Geralico, Andrea
2014-01-01
The definition of relative accelerations and strains among a set of comoving particles is studied in connection with the geometric properties of the frame adapted to a "fiducial observer." We find that a relativistically complete and correct definition of strains must take into account the transport law of the chosen spatial triad along the observer's congruence. We use special congruences of (accelerated) test particles in some familiar spacetimes to elucidate such a point. The celebrated idea of Szekeres' compass of inertia, arising when studying geodesic deviation among a set of free-falling particles, is here generalized to the case of accelerated particles. In doing so we have naturally contributed to the theory of relativistic gravity gradiometer. Moreover, our analysis was made in an observer-dependent form, a fact that would be very useful when thinking about general relativistic tests on space stations orbiting compact objects like black holes and also in other interesting gravitational situations.
The Application of Maximum Principle in Supply Chain Cost Optimization
Zhou Ling; Wang Jun
2013-01-01
In this paper, using the maximum principle for analyzing dynamic cost, we propose a new two-stage supply chain model of the manufacturing-assembly mode for high-tech perishable products supply chain...
Maximum Principle for Nonlinear Cooperative Elliptic Systems on IR N
LEADI Liamidi; MARCOS Aboubacar
2011-01-01
We investigate in this work necessary and sufficient conditions for having a Maximum Principle for a cooperative elliptic system on the whole (IR)N.Moreover,we prove the existence of solutions by an approximation method for the considered system.
Maximum Likelihood Factor Structure of the Family Environment Scale.
Fowler, Patrick C.
1981-01-01
Presents the maximum likelihood factor structure of the Family Environment Scale. The first bipolar dimension, "cohesion v conflict," measures relationship-centered concerns, while the second unipolar dimension is an index of "organizational and control" activities. (Author)
Multiresolution maximum intensity volume rendering by morphological adjunction pyramids
Roerdink, Jos B.T.M.
We describe a multiresolution extension to maximum intensity projection (MIP) volume rendering, allowing progressive refinement and perfect reconstruction. The method makes use of morphological adjunction pyramids. The pyramidal analysis and synthesis operators are composed of morphological 3-D
Multiresolution Maximum Intensity Volume Rendering by Morphological Adjunction Pyramids
Roerdink, Jos B.T.M.
2001-01-01
We describe a multiresolution extension to maximum intensity projection (MIP) volume rendering, allowing progressive refinement and perfect reconstruction. The method makes use of morphological adjunction pyramids. The pyramidal analysis and synthesis operators are composed of morphological 3-D
Changes in context and perception of maximum reaching height.
Wagman, Jeffrey B; Day, Brian M
2014-01-01
Successfully performing a given behavior requires flexibility in both perception and behavior. In particular, doing so requires perceiving whether that behavior is possible across the variety of contexts in which it might be performed. Three experiments investigated how (changes in) context (ie point of observation and intended reaching task) influenced perception of maximum reaching height. The results of experiment 1 showed that perceived maximum reaching height more closely reflected actual reaching ability when perceivers occupied a point of observation that was compatible with that required for the reaching task. The results of experiments 2 and 3 showed that practice perceiving maximum reaching height from a given point of observation improved perception of maximum reaching height from a different point of observation, regardless of whether such practice occurred at a compatible or incompatible point of observation. In general, such findings show bounded flexibility in perception of affordances and are thus consistent with a description of perceptual systems as smart perceptual devices.