On the Threshold of Maximum-Distance Separable Codes
Kindarji, Bruno; Chabanne, Hervé
2010-01-01
Starting from a practical use of Reed-Solomon codes in a cryptographic scheme published in Indocrypt'09, this paper deals with the threshold of linear $q$-ary error-correcting codes. The security of this scheme is based on the intractability of polynomial reconstruction when there is too much noise in the vector. Our approach switches from this paradigm to an Information Theoretical point of view: is there a class of elements that are so far away from the code that the list size is always superpolynomial? Or, dually speaking, is Maximum-Likelihood decoding almost surely impossible? We relate this issue to the decoding threshold of a code, and show that when the minimal distance of the code is high enough, the threshold effect is very sharp. In a second part, we explicit lower-bounds on the threshold of Maximum-Distance Separable codes such as Reed-Solomon codes, and compute the threshold for the toy example that motivates this study.
Alderson, Tim L.; Svenja Huntemann
2013-01-01
Singleton-type upper bounds on the minimum Lee distance of general (not necessarily linear) Lee codes over ℤq are discussed. Two bounds known for linear codes are shown to also hold in the general case, and several new bounds are established. Codes meeting these bounds are investigated and in some cases characterised.
Maximum likelihood estimates of pairwise rearrangement distances.
Serdoz, Stuart; Egri-Nagy, Attila; Sumner, Jeremy; Holland, Barbara R; Jarvis, Peter D; Tanaka, Mark M; Francis, Andrew R
2017-06-21
Accurate estimation of evolutionary distances between taxa is important for many phylogenetic reconstruction methods. Distances can be estimated using a range of different evolutionary models, from single nucleotide polymorphisms to large-scale genome rearrangements. Corresponding corrections for genome rearrangement distances fall into 3 categories: Empirical computational studies, Bayesian/MCMC approaches, and combinatorial approaches. Here, we introduce a maximum likelihood estimator for the inversion distance between a pair of genomes, using a group-theoretic approach to modelling inversions introduced recently. This MLE functions as a corrected distance: in particular, we show that because of the way sequences of inversions interact with each other, it is quite possible for minimal distance and MLE distance to differently order the distances of two genomes from a third. The second aspect tackles the problem of accounting for the symmetries of circular arrangements. While, generally, a frame of reference is locked, and all computation made accordingly, this work incorporates the action of the dihedral group so that distance estimates are free from any a priori frame of reference. The philosophy of accounting for symmetries can be applied to any existing correction method, for which examples are offered. Copyright © 2017 Elsevier Ltd. All rights reserved.
Predicting species' maximum dispersal distances from simple plant traits.
Tamme, Riin; Götzenberger, Lars; Zobel, Martin; Bullock, James M; Hooftman, Danny A P; Kaasik, Ants; Pärtel, Meelis
2014-02-01
Many studies have shown plant species' dispersal distances to be strongly related to life-history traits, but how well different traits can predict dispersal distances is not yet known. We used cross-validation techniques and a global data set (576 plant species) to measure the predictive power of simple plant traits to estimate species' maximum dispersal distances. Including dispersal syndrome (wind, animal, ant, ballistic, and no special syndrome), growth form (tree, shrub, herb), seed mass, seed release height, and terminal velocity in different combinations as explanatory variables we constructed models to explain variation in measured maximum dispersal distances and evaluated their power to predict maximum dispersal distances. Predictions are more accurate, but also limited to a particular set of species, if data on more specific traits, such as terminal velocity, are available. The best model (R2 = 0.60) included dispersal syndrome, growth form, and terminal velocity as fixed effects. Reasonable predictions of maximum dispersal distance (R2 = 0.53) are also possible when using only the simplest and most commonly measured traits; dispersal syndrome and growth form together with species taxonomy data. We provide a function (dispeRsal) to be run in the software package R. This enables researchers to estimate maximum dispersal distances with confidence intervals for plant species using measured traits as predictors. Easily obtainable trait data, such as dispersal syndrome (inferred from seed morphology) and growth form, enable predictions to be made for a large number of species.
Note on maximal distance separable codes
YANG Jian-sheng; WANG De-xiu; JIN Qing-fang
2009-01-01
In this paper, the maximal length of maximal distance separable(MDS)codes is studied, and a new upper bound formula of the maximal length of MDS codes is obtained. Especially, the exact values of the maximal length of MDS codes in some parameters are given.
Covariance of maximum likelihood evolutionary distances between sequences aligned pairwise.
Dessimoz, Christophe; Gil, Manuel
2008-06-23
The estimation of a distance between two biological sequences is a fundamental process in molecular evolution. It is usually performed by maximum likelihood (ML) on characters aligned either pairwise or jointly in a multiple sequence alignment (MSA). Estimators for the covariance of pairs from an MSA are known, but we are not aware of any solution for cases of pairs aligned independently. In large-scale analyses, it may be too costly to compute MSAs every time distances must be compared, and therefore a covariance estimator for distances estimated from pairs aligned independently is desirable. Knowledge of covariances improves any process that compares or combines distances, such as in generalized least-squares phylogenetic tree building, orthology inference, or lateral gene transfer detection. In this paper, we introduce an estimator for the covariance of distances from sequences aligned pairwise. Its performance is analyzed through extensive Monte Carlo simulations, and compared to the well-known variance estimator of ML distances. Our covariance estimator can be used together with the ML variance estimator to form covariance matrices. The estimator performs similarly to the ML variance estimator. In particular, it shows no sign of bias when sequence divergence is below 150 PAM units (i.e. above ~29% expected sequence identity). Above that distance, the covariances tend to be underestimated, but then ML variances are also underestimated.
Relationship Between Maximum Aerobic Speed Performance and Distance Covered in Rugby Union Games.
Swaby, Rick; Jones, Paul A; Comfort, Paul
2016-10-01
Swaby, R, Jones, PA, and Comfort, P. Relationship between maximum aerobic speed performance and distance covered in rugby union games. J Strength Cond Res 30(10): 2788-2793, 2016-Researchers have shown a clear relationship between aerobic fitness and the distance covered in professional soccer, although no research has identified such a relationship in rugby union. Therefore, the aim of the study was to identify whether there was a relationship between maximal aerobic speed (MAS) and the distance covered in rugby union games. Fourteen professional rugby union players (age = 26 ± 6 years, height = 1.90 ± 0.12 m, mass = 107.1 ± 24.1 kg) participated in this investigation. Each player performed a MAS test on 3 separate occasions during the preseason, to determine reliability and provide baseline data, and participated in 6 competitive games during the early stages of the season. Game data were collected using global positioning system technology. No significant difference (p > 0.05) in total distance covered was observed between games. Relationships between players' MAS and the average distance covered from 6 competitive games were explored using Pearson's correlation coefficients, with MAS performance showing a strong relationship with distance covered during match play (r = 0.746, p aerobic fitness to increase the distance that the athlete covers in the game.
Moving related to separation : who moves and to what distance
Mulder, Clara H.; Malmberg, Gunnar
2011-01-01
We address the issue of moving from the joint home on the occasion of separation. Our research question is: To what extent can the occurrence of moves related to separation, and the distance moved, be explained by ties to the location, resources, and other factors influencing the likelihood of movin
Separation distance and static transmission error of involute spur gears
Tse, David K.; Lin, Hsiang H.
1992-01-01
The effects of separation distance and deflection of gear teeth on the static transmission error of involute spur gears are investigated. In this paper, only low-contact-ratio gears with true involute profile are studied. Gear ratio and tooth addendum are varied to examine their effects on the separation distance and static transmission error. Results obtained from the investigation shows that the contact ratio and static transmission error are affected significantly if considering the separation distance. In general, the magnitude of contact ratio has been increased and the variation of static transmission error has been smoothed. The most significant change occurs for a gear pair with a theoretical contact ratio close to 1.95.
Separation distance and static transmission error of involute spur gears
Tse, David K.; Lin, Hsiang H.
1992-07-01
The effects of separation distance and deflection of gear teeth on the static transmission error of involute spur gears are investigated. In this paper, only low-contact-ratio gears with true involute profile are studied. Gear ratio and tooth addendum are varied to examine their effects on the separation distance and static transmission error. Results obtained from the investigation shows that the contact ratio and static transmission error are affected significantly if considering the separation distance. In general, the magnitude of contact ratio has been increased and the variation of static transmission error has been smoothed. The most significant change occurs for a gear pair with a theoretical contact ratio close to 1.95.
Jat, Prahlad; Serre, Marc L
2016-12-01
Widespread contamination of surface water chloride is an emerging environmental concern. Consequently accurate and cost-effective methods are needed to estimate chloride along all river miles of potentially contaminated watersheds. Here we introduce a Bayesian Maximum Entropy (BME) space/time geostatistical estimation framework that uses river distances, and we compare it with Euclidean BME to estimate surface water chloride from 2005 to 2014 in the Gunpowder-Patapsco, Severn, and Patuxent subbasins in Maryland. River BME improves the cross-validation R(2) by 23.67% over Euclidean BME, and river BME maps are significantly different than Euclidean BME maps, indicating that it is important to use river BME maps to assess water quality impairment. The river BME maps of chloride concentration show wide contamination throughout Baltimore and Columbia-Ellicott cities, the disappearance of a clean buffer separating these two large urban areas, and the emergence of multiple localized pockets of contamination in surrounding areas. The number of impaired river miles increased by 0.55% per year in 2005-2009 and by 1.23% per year in 2011-2014, corresponding to a marked acceleration of the rate of impairment. Our results support the need for control measures and increased monitoring of unassessed river miles.
Blandino, Rémi; Barbieri, Marco; Etesse, Jean; Grangier, Philippe; Tualle-Brouri, Rosa
2012-01-01
We show that the maximum transmission distance of continuous-variable quantum key distribution in presence of a Gaussian noisy lossy channel can be arbitrarily increased using a linear noiseless amplifier. We explicitly consider a protocol using amplitude and phase modulated coherent states with reverse reconciliation. We find that a noiseless amplifier with amplitude gain g can increase the maximum admissible losses by a factor 1/g^2.
Blandino, Rémi; Etesse, Jean; Grangier, Philippe [Laboratoire Charles Fabry, Institut d' Optique, CNRS, Université Paris-Sud, 2 avenue Augustin Fresnel, 91127 Palaiseau Cedex (France); Leverrier, Anthony [Institute for Theoretical Physics, ETH Zurich, 8093 Zurich, Switzerland and INRIA Paris-Rocquencourt, 78153 Le Chesnay Cedex (France); Barbieri, Marco [Laboratoire Charles Fabry, Institut d' Optique, CNRS, Université Paris-Sud, 2 avenue Augustin Fresnel, 91127 Palaiseau Cedex, France and Clarendon Laboratory, Department of Physics, University of Oxford, OX1 3PU (United Kingdom); Tualle-Brouri, Rosa [Laboratoire Charles Fabry, Institut d' Optique, CNRS, Université Paris-Sud, 2 avenue Augustin Fresnel, 91127 Palaiseau Cedex, France and Institut Universitaire de France, 103 boulevard St. Michel, 75005, Paris (France)
2014-12-04
We show that the maximum transmission distance of continuous-variable quantum key distribution in presence of a Gaussian noisy lossy channel can be arbitrarily increased using a heralded noiseless linear amplifier. We explicitly consider a protocol using amplitude and phase modulated coherent states with reverse reconciliation. Assuming that the secret key rate drops to zero for a line transmittance T{sub lim}, we find that a noiseless amplifier with amplitude gain g can improve this value to T{sub lim}/g{sup 2}, corresponding to an increase in distance proportional to log g. We also show that the tolerance against noise is increased.
Self-reported maximum walking distance in persons with MS may affect the EDSS.
Berger, Warren; Payne, Michael W C; Morrow, Sarah A
2017-08-15
In persons with MS (PwMS), the Expanded Disability Status Scale (EDSS) is used to monitor disability progression. Scores between 4.0 and 7.0 are determined by maximum walking distance. Self-estimation of this value is often employed in clinic settings. To examine the accuracy with which PwMS estimate their walking distance, and observe subsequent changes to the EDSS. This prospective cohort study recruited PwMS with previously recorded EDSS of 3.5-7.0. Participants estimated their maximum walking distance and then walked as far as they could along a pre-specified course. Each distance was converted to an EDSS score, the "estimated EDSS" and the "actual EDSS". Chi-Square analysis was used to compare EDSS scores. Logistic regression was used to determine predictors of inaccurate estimations. Of the 66 PwMS in this study, 43.9% had a difference in the actual EDSS compared to the estimated EDSS. Median estimated EDSS was 4.75 (range 3.0-7.0); after walking assessment, median actual EDSS was 5.0 (range 3.0-7.0), which represented a significant difference [X(2) (df 64, N=66)=206.9; pEDSS decreased in 9 PwMS (13.6%) and increased in 20 PwMS (30.3%). Logistic regression did not find any demographic/disease characteristic to be predictive of this discrepancy. Some PwMS do not accurately estimate maximum walking distance; only 56.1% of PwMS accurately estimated their actual EDSS. Copyright © 2017 Elsevier B.V. All rights reserved.
Role of the source to building lateral separation distance in petroleum vapor intrusion
Verginelli, Iason; Capobianco, Oriana; Baciocchi, Renato
2016-06-01
The adoption of source to building separation distances to screen sites that need further field investigation is becoming a common practice for the evaluation of the vapor intrusion pathway at sites contaminated by petroleum hydrocarbons. Namely, for the source to building vertical distance, the screening criteria for petroleum vapor intrusion have been deeply investigated in the recent literature and fully addressed in the recent guidelines issued by ITRC and U.S.EPA. Conversely, due to the lack of field and modeling studies, the source to building lateral distance received relatively low attention. To address this issue, in this work we present a steady-state vapor intrusion analytical model incorporating a piecewise first-order aerobic biodegradation limited by oxygen availability that accounts for lateral source to building separation. The developed model can be used to evaluate the role and relevance of lateral vapor attenuation as well as to provide a site-specific assessment of the lateral screening distances needed to attenuate vapor concentrations to risk-based values. The simulation outcomes showed to be consistent with field data and 3-D numerical modeling results reported in previous studies and, for shallow sources, with the screening criteria recommended by U.S.EPA for the vertical separation distance. Indeed, although petroleum vapors can cover maximum lateral distances up to 25-30 m, as highlighted by the comparison of model outputs with field evidences of vapor migration in the subsurface, simulation results by this new model indicated that, regardless of the source concentration and depth, 6 m and 7 m lateral distances are sufficient to attenuate petroleum vapors below risk-based values for groundwater and soil sources, respectively. However, for deep sources (> 5 m) and for low to moderate source concentrations (benzene concentrations lower than 5 mg/L in groundwater and 0.5 mg/kg in soil) the above criteria were found extremely conservative as
Two-dimensional maximum local variation based on image euclidean distance for face recognition.
Gao, Quanxue; Gao, Feifei; Zhang, Hailin; Hao, Xiu-Juan; Wang, Xiaogang
2013-10-01
Manifold learning concerns the local manifold structure of high dimensional data, and many related algorithms are developed to improve image classification performance. None of them, however, consider both the relationships among pixels in images and the geometrical properties of various images during learning the reduced space. In this paper, we propose a linear approach, called two-dimensional maximum local variation (2DMLV), for face recognition. In 2DMLV, we encode the relationships among pixels in images using the image Euclidean distance instead of conventional Euclidean distance in estimating the variation of values of images, and then incorporate the local variation, which characterizes the diversity of images and discriminating information, into the objective function of dimensionality reduction. Extensive experiments demonstrate the effectiveness of our approach.
Doinikov, Alexander A.; Bouakaz, Ayache
2015-10-01
resonance frequency increases. The theoretical model is validated by comparing with experimental data available in the literature for phospholipid-shelled microbubbles near a compliant agarose gel boundary. The comparison is conducted for two data sets. In the first case, the simulated and measured parameters of the bubble acoustic response (resonance frequency and maximum amplitude of the scattered pressure) are compared as a function of bubble diameter, using the experimental data obtained for bubbles with diameters ranging from 2.3 to 4 μm, insonified at 30 kPa in the frequency range from 4 to 13.5 MHz. In the second case, the simulated and measured values of the maximum amplitude of the scattered pressure are compared as a function of separation distance from the agarose boundary, using the experimental data for a 2.3 μm-diameter bubble insonicated at 69 kPa and 11 MHz. In both cases, the theoretical model correctly predicts the qualitative tendency in the behavior of the measured quantities and their quantitative level.
47 CFR 73.207 - Minimum distance separation between stations.
2010-10-01
... kW ERP and 100 meters antenna HAAT (or equivalent lower ERP and higher antenna HAAT based on a class... which have been notified internationally as Class A are limited to a maximum of 3.0 kW ERP at 100 meters... internationally as Class AA are limited to a maximum of 6.0 kW ERP at 100 meters HAAT, or the equivalent; (iii) U...
Mansoureh Haj Mohammad Hosseini
2011-04-01
Full Text Available In this paper, a bi-objective mathematical model for emergency services location-allocation problem on a tree network considering maximum distance constraint is presented. The first objective function called centdian is a weighted mean of a minisum and a minimax criterion and the second one is a maximal covering criterion. For the solution of the bi-objective optimization problem, the problem is split in two sub problems: the selection of the best set of locations, and a demand assignment problem to evaluate each selection of locations. We propose a heuristic algorithm to characterize the efficient location point set on the network. Finally, some numerical examples are presented to illustrate the effectiveness of the proposed algorithms.
Optimum Projection Angle for Attaining Maximum Distance in a Rugby Place Kick
Nicholas P. Linthorne
2014-03-01
Full Text Available This study investigated the effect of projection angle on the distance attained in a rugby place kick. A male rugby player performed 49 maximum-effort kicks using projection angles of between 20 and 50°. The kicks were recorded by a video camera at 50 Hz and a 2 D biomechanical analysis was conducted to obtain measures of the projection velocity and projection angle of the ball. The player’s optimum projection angle was calculated by substituting a mathematical expression for the relationship between projection velocity and projection angle into the equations for the aerodynamic flight of a rugby ball. We found that the player’s calculated optimum projection angle (30.6°, 95% confidence limits ± 1.9° was in close agreement with his preferred projection angle (mean value 30.8°, 95% confidence limits ± 2.1°. The player’s calculated optimum projection angle was also similar to projection angles previously reported for skilled rugby players. The optimum projection angle in a rugby place kick is considerably less than 45° because the projection velocity that a player can produce decreases substantially as projection angle is increased. Aerodynamic forces and the requirement to clear the crossbar have little effect on the optimum projection angle.
Maximum Time Separation of Events in Cyclic Systems with Linear and Latest Timing Constraints
Jin, Fen; Hulgaard, Henrik; Cerny, Eduard
1998-01-01
The determination of the maximum time separations of events is important in the design, synthesis, and verification of digital systems, especially in interface timing verification. Many researchers have explored solutions to the problem with various restrictions: a) on the type of constraints......, and b) on whether the events in the specification are allowed to occur repeatedly. When the events can occur only once, the problem is well solved. There are fewer concrete results for systems where the events can occur repeatedly. We extend the work by Hulgaard et al.\\ for computing the maximum...
Zhou, Jinwei; Lukin, Leonid V; Braun, Charles L
2008-08-21
Photoinduced transient dipole experiments are used to measure the effective charge separation distance, which is equivalent to the photoinduced change in dipole moment divided by the electron charge of flexible electron-donor/acceptor systems, D-(CH2)n-A, where D is 4- N,N-dimethylaniline, A is 9-anthryl, and n = 3, 4. We find that the dipole moments increase strongly with solvent polarity. For the compound with n = 4 (DBA4), analysis of dipole signals indicates that the effective charge separation distances in toluene, 1,4-dioxane, ethyl acetate, tetrahydrofuran, dichloromethane, 1,2-dichloroethane, 2-methylpentanone-3, 3-pentanone, and benzonitrile are 2.2, 2.5, 4.5, 4.7, 5.5, 5.5, 4.8, and 6.3 A, respectively. These values can be understood as the root-mean-square charge separation distance in the solutions of different solvents. We assume that the folded contact configuration has a separation distance of 3.5 A, the extended, solvent-separated configuration has a separation distance of 8.0 A, and that they are the only two stable species after electron-transfer quenching. The formation efficiencies of contact radical ion pairs (CRIPs) and solvent-separated radical ion pairs (SSRIPs) are estimated in different solvents. The results indicate that a significant fraction of the ion pairs exist as solvent-separated ion pairs when the dielectric constant of the solvent is larger than 10. These results indicate that electron-transfer quenching can indeed happen at large separations in polar solvents. They also reveal that there is a barrier for ion pairs formed at large separations, hindering collapse to a contact separation of around 3.5 A.
Mohammad H. Radfar
2006-11-01
Full Text Available We present a new technique for separating two speech signals from a single recording. The proposed method bridges the gap between underdetermined blind source separation techniques and those techniques that model the human auditory system, that is, computational auditory scene analysis (CASA. For this purpose, we decompose the speech signal into the excitation signal and the vocal-tract-related filter and then estimate the components from the mixed speech using a hybrid model. We first express the probability density function (PDF of the mixed speech's log spectral vectors in terms of the PDFs of the underlying speech signal's vocal-tract-related filters. Then, the mean vectors of PDFs of the vocal-tract-related filters are obtained using a maximum likelihood estimator given the mixed signal. Finally, the estimated vocal-tract-related filters along with the extracted fundamental frequencies are used to reconstruct estimates of the individual speech signals. The proposed technique effectively adds vocal-tract-related filter characteristics as a new cue to CASA models using a new grouping technique based on an underdetermined blind source separation. We compare our model with both an underdetermined blind source separation and a CASA method. The experimental results show that our model outperforms both techniques in terms of SNR improvement and the percentage of crosstalk suppression.
Dansereau Richard M
2007-01-01
Full Text Available We present a new technique for separating two speech signals from a single recording. The proposed method bridges the gap between underdetermined blind source separation techniques and those techniques that model the human auditory system, that is, computational auditory scene analysis (CASA. For this purpose, we decompose the speech signal into the excitation signal and the vocal-tract-related filter and then estimate the components from the mixed speech using a hybrid model. We first express the probability density function (PDF of the mixed speech's log spectral vectors in terms of the PDFs of the underlying speech signal's vocal-tract-related filters. Then, the mean vectors of PDFs of the vocal-tract-related filters are obtained using a maximum likelihood estimator given the mixed signal. Finally, the estimated vocal-tract-related filters along with the extracted fundamental frequencies are used to reconstruct estimates of the individual speech signals. The proposed technique effectively adds vocal-tract-related filter characteristics as a new cue to CASA models using a new grouping technique based on an underdetermined blind source separation. We compare our model with both an underdetermined blind source separation and a CASA method. The experimental results show that our model outperforms both techniques in terms of SNR improvement and the percentage of crosstalk suppression.
Sensitive dependencies and separation distances for genetically modified herbicide-tolerant crops.
Perry, Joe N
2002-06-07
The amount of land available for the coexistent growing of both organic and genetically modified herbicide-tolerant (GMHT) crops depends on the separation distance between the two types of crop. The form of the decline in the proportion of land available for growing one of these crop types due to increasing separation distance is linear on a suitable scale, but with a slope and intercept that are sensitively dependent on the proportion of the other crop already present. Spatially explicit simulations from realistic scenarios indicate that a major increase in separation distances, currently under review by the UK government, may have serious implications for the future coexistence of organic and GMHT crops in the UK.
Andrey A. Toropov
2001-06-01
Full Text Available The enthalpy of formation of a set of 60 hydroarbons is calculated on the basis of topological descriptors defined from the distance and detour matrices within the realm of the QSAR/QSPR theory. Linear and non-linear polynomials fittings are made and results show the need to resort to higher-order regression equations in order to get better concordances between theoretical results and experimental available data. Besides, topological indices computed from maximum order distances seems to yield rather satisfactory predictions of heats of formation for hydrocarbons.
Alvah C. Stahlnecker IV
2008-12-01
Full Text Available A percentage of either measured or predicted maximum heart rate is commonly used to prescribe and measure exercise intensity. However, maximum heart rate in athletes may be greater during competition or training than during laboratory exercise testing. Thus, the aim of the present investigation was to determine if endurance-trained runners train and compete at or above laboratory measures of 'maximum' heart rate. Maximum heart rates were measured utilising a treadmill graded exercise test (GXT in a laboratory setting using 10 female and 10 male National Collegiate Athletic Association (NCAA division 2 cross-country and distance event track athletes. Maximum training and competition heart rates were measured during a high-intensity interval training day (TR HR and during competition (COMP HR at an NCAA meet. TR HR (207 ± 5.0 b·min-1; means ± SEM and COMP HR (206 ± 4 b·min-1 were significantly (p < 0.05 higher than maximum heart rates obtained during the GXT (194 ± 2 b·min-1. The heart rate at the ventilatory threshold measured in the laboratory occurred at 83.3 ± 2.5% of the heart rate at VO2 max with no differences between the men and women. However, the heart rate at the ventilatory threshold measured in the laboratory was only 77% of the maximal COMP HR or TR HR. In order to optimize training-induced adaptation, training intensity for NCAA division 2 distance event runners should not be based on laboratory assessment of maximum heart rate, but instead on maximum heart rate obtained either during training or during competition
Blasco, Francisco Lazaro
2011-01-01
A novel fountain coding scheme has been introduced. The scheme consists of a parallel concatenation of a MDS block code with a LRFC code, both constructed over the same field, $F_q$. The performance of the concatenated fountain coding scheme has been analyzed through derivation of tight bounds on the probability of decoding failure as a function of the overhead. It has been shown how the concatenated scheme performs as well as LRFC codes in channels characterized by high erasure probabilities, whereas they provide failure probabilities lower by several orders of magnitude at moderate/low erasure probabilities.
2010-09-16
... Ammonium Nitrate and Blasting Agents From Explosives or Blasting Agents (2002R-226P) AGENCY: Bureau of... CFR 555.220 set forth a table of separation distances of ammonium nitrate and blasting agents from explosives or blasting agents followed by six explanatory notes. Note three (3) states that the...
Analysis of the 5 iron golf swing when hitting for maximum distance.
Healy, Aoife; Moran, Kieran A; Dickson, Jane; Hurley, Cillian; Smeaton, Alan F; O'Connor, Noel E; Kelly, Philip; Haahr, Mads; Chockalingam, Nachiappan
2011-07-01
Most previous research on golf swing mechanics has focused on the driver club. The aim of this study was to identify the kinematic factors that contribute to greater hitting distance when using the 5 iron club. Three-dimensional marker coordinate data were collected (250 Hz) to calculate joint kinematics at eight key swing events, while a swing analyser measured club swing and ball launch characteristics. Thirty male participants were assigned to one of two groups, based on their ball launch speed (high: 52.9 ± 2.1 m · s(-1); low: 39.9 ± 5.2 m · s(-1)). Statistical analyses were used to identify variables that differed significantly between the two groups. Results showed significant differences were evident between the two groups for club face impact point and a number of joint angles and angular velocities, with greater shoulder flexion and less left shoulder internal rotation in the backswing, greater extension angular velocity in both shoulders at early downswing, greater left shoulder adduction angular velocity at ball contact, greater hip joint movement and X Factor angle during the downswing, and greater left elbow extension early in the downswing appearing to contribute to greater hitting distance with the 5 iron club.
The SN 1006 Remnant Optical Proper Motions, Deep Imaging, Distance, and Brightness at Maximum
Winkler, P F; Long, K S; Gupta, Gaurav; Long, Knox S.
2002-01-01
We report the first measurement of proper motions in the SN1006 remnant (G327.6+14.6) based entirely on digital images. CCD images from three epochs spanning a period of 11 years are used: 1987 from Las Campanas, and 1991 and 1998 from CTIO. Measuring the shift of delicate Balmer filaments along the northwest rim of the remnant, we obtain proper motions of 280 +/- 8 mas/yr along the entire length where the filaments are well defined, with little systematic variation along the filaments. We also report very deep Halpha imaging observations of the entire remnant that clearly show very faint emission surrounding almost the entire shell, as well as some diffuse emission regions in the (projected) interior. Combining the proper motion measurement with a recent measurement of the shock velocity based on spectra of the same filaments by Ghavamian et al. leads to a distance of 2.17 +/- 0.08 kpc to SN1006. Several lines of argument suggest that SN1006 was a Type Ia event, so the improved distance measurement can be co...
Piringer, Martin; Knauder, Werner; Petz, Erwin; Schauberger, Günther
2016-09-01
Direction-dependent separation distances to avoid odour annoyance, calculated with the Gaussian Austrian Odour Dispersion Model AODM and the Lagrangian particle diffusion model LASAT at two sites, are analysed and compared. The relevant short-term peak odour concentrations are calculated with a stability-dependent peak-to-mean algorithm. The same emission and meteorological data, but model-specific atmospheric stability classes are used. The estimate of atmospheric stability is obtained from three-axis ultrasonic anemometers using the standard deviations of the three wind components and the Obukhov stability parameter. The results are demonstrated for the Austrian villages Reidling and Weissbach with very different topographical surroundings and meteorological conditions. Both the differences in the wind and stability regimes as well as the decrease of the peak-to-mean factors with distance lead to deviations in the separation distances between the two sites. The Lagrangian model, due to its model physics, generally calculates larger separation distances. For worst-case calculations necessary with environmental impact assessment studies, the use of a Lagrangian model is therefore to be preferred over that of a Gaussian model. The study and findings relate to the Austrian odour impact criteria.
Separation of photo-induced radical pair in cryptochrome to a functionally critical distance
Solov'yov, Ilia; Domratcheva, Tatiana; Schulten, Klaus
2014-01-01
Cryptochrome is a blue light receptor that acts as a sensor for the geomagnetic field and assists many animals in long-range navigation. The magnetoreceptor function arises from light-induced formation of a radical pair through electron transfer between a flavin cofactor (FAD) and a triad...... of tryptophan residues. Here, this electron transfer is investigated by quantum chemical and classical molecular dynamics calculations. The results reveal how sequential electron transfer, assisted by rearrangement of polar side groups in the cryptochrome interior, can yield a FAD-Trp radical pair state...... with the FAD and Trp partners separated beyond a critical distance. The large radical pair separation reached establishes cryptochrome's sensitivity to the geomagnetic field through weakening of distance-dependent exchange and dipole-dipole interactions. It is estimated that the key secondary electron transfer...
Ghasempour Ardakani, Abbas; Safarzadeh, Fatemeh
2016-08-01
In this paper, we first generate optical vortices with different topological charges, using the method of computer-generated holograms. Then, we separate one of the optical vortices from others with a special topological charge and pass it through a diffraction grating with a specified line spacing. It is observed that the vortex beam, after passing through the grating, converts to several separated vortices with the same topological charge whose value is similar to the topological charge of the input vortex. Finally, we show that the distance between generated vortices can be controlled with the variation of spacing between grating lines. So, the proposed setup in this paper can be exploited as an optical vortex divider which is useful in communication and trapping systems.
I-distance and separability coefficient in business evaluation of SME's in agribusiness
Popović Blaženka
2016-01-01
Full Text Available Systematic and continuous process of measuring and comparing business results of companies regarding to business results of leaders, in order to obtain information that will help the company to take action to improve its performance, is in a function of improving business operations. Accordingly, the first objective of this paper is, based on the coefficient of separability, to determine which indicators of business conditions and business results have the greatest impact on differences in the business operations of the observed SMEs operating in the food industry. The second objective of this work is to make the ranking of companies based on the business conditions and business results using discriminant analysis (I-distance, and then, to determine the overall rank of companies using general ranking coefficient (Ker. The results show that companies are significantly separated according to business results rather than to business conditions, and in addition, the business results also had a crucial impact on the overall rank of each company.
A maximum entropy approach to separating noise from signal in bimodal affiliation networks
Dianati, Navid
2016-01-01
In practice, many empirical networks, including co-authorship and collocation networks are unimodal projections of a bipartite data structure where one layer represents entities, the second layer consists of a number of sets representing affiliations, attributes, groups, etc., and an inter-layer link indicates membership of an entity in a set. The edge weight in the unimodal projection, which we refer to as a co-occurrence network, counts the number of sets to which both end-nodes are linked. Interpreting such dense networks requires statistical analysis that takes into account the bipartite structure of the underlying data. Here we develop a statistical significance metric for such networks based on a maximum entropy null model which preserves both the frequency sequence of the individuals/entities and the size sequence of the sets. Solving the maximum entropy problem is reduced to solving a system of nonlinear equations for which fast algorithms exist, thus eliminating the need for expensive Monte-Carlo sam...
Takemura, Shunsuke; Kobayashi, Manabu; Yoshimoto, Kazuo
2016-10-01
Frequency-dependent model of the apparent radiation pattern has been extensively incorporated into engineering and scientific applications for high-frequency seismic waves, but distance-dependent properties have not yet been fully taken into account. We investigated the unified characteristics of frequency and distance dependences in both apparent P- and S-wave radiation patterns during local crustal earthquakes. Observed distortions of the apparent P- and S-wave radiation patterns could be simply modeled by using a function of the normalized hypocentral distance, which is a product of the wave number and hypocentral distance. This behavior suggests that major cause of distortion of the apparent radiation pattern is seismic wave scattering and diffraction within the heterogeneous crust. On the basis of observed normalized hypocentral distance dependency, we proposed a method for prediction of spatial distributions of maximum P- and S-wave amplitudes. Our method incorporating normalized hypocentral distance dependence of the apparent radiation pattern reproduced the observed spatial distributions of maximum P- and S-wave amplitudes over a wide frequency and distance ranges successfully.[Figure not available: see fulltext.
Kazi Takpaya; Wei Gang
2003-01-01
Blind identification-blind equalization for Finite Impulse Response (FIR) Multiple Input-Multiple Output (MIMO) channels can be reformulated as the problem of blind sources separation. It has been shown that blind identification via decorrelating sub-channels method could recover the input sources. The Blind Identification via Decorrelating Sub-channels(BIDS)algorithm first constructs a set of decorrelators, which decorrelate the output signals of subchannels, and then estimates the channel matrix using the transfer functions of the decorrelators and finally recovers the input signal using the estimated channel matrix. In this paper, a new approximation of the input source for FIR-MIMO channels based on the maximum likelihood source separation method is proposed. The proposed method outperforms BIDS in the presence of additive white Gaussian noise.
AaziTakpaya; WeiGang
2003-01-01
Blind identification-blind equalization for finite Impulse Response(FIR)Multiple Input-Multiple Output(MIMO)channels can be reformulated as the problem of blind sources separation.It has been shown that blind identification via decorrelating sub-channels method could recover the input sources.The Blind Identification via Decorrelating Sub-channels(BIDS)algorithm first constructs a set of decorrelators,which decorrelate the output signals of subchannels,and then estimates the channel matrix using the transfer functions of the decorrelators and finally recovers the input signal using the estimated channel matrix.In this paper,a new qpproximation of the input source for FIR-MIMO channels based on the maximum likelihood source separation method is proposed.The proposed method outperforms BIDS in the presence of additive white Garssian noise.
UHF Passive RFID标签最大阅读距离的研究%Study on maximum reading distance of UHF Passive RFID tag
谢晶晶; 赵东东
2012-01-01
特定的RFID阅读器与标签之间的最大阅读距离是衡量标签性能的一个重要因素.首先介绍了RFID工作原理,同时介绍本文所要研究的无源UHF RFID系统.在前向链路方向,根据福利斯空间公式推出标签最大阅读距离的理论公式,并且用MATLAB软件仿真了功率传输系数、标签工作频率与阅读距离之间的关系,然后分析得到了后向链路方向阅读器所能接收到的反向散射能量的公式,通过代入实际数据证实了最大阅读距离公式的理论上的可靠性.在此基础上,搭建一个实际的测量最大距离的实验平台,从而通过实际试验验证推出的理论计算公式的准确性程度的确是比较高的,最后又根据推导出来的的最大阅读距离公式,从标签和阅读器2个方面分析了影响最大阅读距离的因素和提高最大阅读距离的方法.研究对象是超高频(UHF) (902～928 MHz)的无源RFID系统,阅读器与标签的天线都是线极化单天线.%The maximum read distance is an important factor to mfaiurp the performance of the tag. The principle of the RFID system is introduced, then the principle of the passive UHF RFID system is given. In the direction of the forward link,the theoretical maximum reading distance formula is derived according to the Friis formula. Then the relation between the power transmitting coefficient and the maximum reading distance and the relation between the working frequency and the maximum reading distance are simulated using MATLAB. Then the reverse scattering power formula which the reader can get is derived,and the theoretical reliability of the maximum reading range is verified according to the substitution of the practical data. On the basis of it,a experiment platform is built to measure the practical maximum reading distance, then the distinction between the theoretical maximum reading distance and the practical maximum reading distance is small, so the practical reliability of
2010-10-01
... containing Class 7 (radioactive) materials in cargo aircraft. 175.702 Section 175.702 Transportation Other... (radioactive) materials in cargo aircraft. (a) No person may carry in a cargo aircraft any package required by... separation distance between the surfaces of the radioactive materials packages, overpacks or...
Chen, X.; Le, T.; Ewing, D.; Ching, C. Y.
2016-12-01
The mass transfer to turbulent flow through back-to-back pipe bends arranged in a 180° configuration with different lengths of pipe between the bends was measured using a dissolving gypsum test section in water. The measurements were performed for bends with a radius of curvature of 1.5 times the pipe diameter ( D) at a Reynolds numbers of 70,000 and Schmidt number of 1280. The maximum mass transfer in the bends decreased from approximately 1.8 times the mass transfer in the upstream pipe when there was no separation distance between the bends to 1.7 times when there was a 1 D or 5 D length of pipe between the bends. The location of the maximum mass transfer was on the inner sidewall downstream of the second bend when there was no separation distance between the bends. This location changed to the inner wall at the beginning of the second bend when there was a 1 D long pipe between the bends, and to the inner sidewall at the end of the first bend when there was a 5 D long pipe between the bends.
Furbish, David J.; Schmeeckle, Mark; Schumer, Rina; Fathel, Siobhan L.
2016-01-01
We describe the most likely forms of the probability distributions of bed load particle velocities, accelerations, hop distances, and travel times, in a manner that formally appeals to inferential statistics while honoring mechanical and kinematic constraints imposed by equilibrium transport conditions. The analysis is based on E. Jaynes's elaboration of the implications of the similarity between the Gibbs entropy in statistical mechanics and the Shannon entropy in information theory. By maximizing the information entropy of a distribution subject to known constraints on its moments, our choice of the form of the distribution is unbiased. The analysis suggests that particle velocities and travel times are exponentially distributed and that particle accelerations follow a Laplace distribution with zero mean. Particle hop distances, viewed alone, ought to be distributed exponentially. However, the covariance between hop distances and travel times precludes this result. Instead, the covariance structure suggests that hop distances follow a Weibull distribution. These distributions are consistent with high-resolution measurements obtained from high-speed imaging of bed load particle motions. The analysis brings us closer to choosing distributions based on our mechanical insight.
Débora Martins Cattoni
2009-12-01
Full Text Available INTRODUÇÃO: a distância interincisiva máxima é um importante aspecto na avaliação miofuncional orofacial, pois distúrbios miofuncionais orofaciais podem limitar a abertura da boca. OBJETIVO: mensurar a distância interincisiva máxima de crianças respiradoras bucais, relacionando-a com a idade, e comparar as médias dessas medidas com as médias dessa distância em crianças sem queixas fonoaudiológicas. MÉTODOS: participaram 99 crianças respiradoras bucais, de ambos os gêneros, com idades entre 7 anos e 11 anos e 11 meses, leucodermas, em dentadura mista. O grupo controle foi composto por 253 crianças, com idades entre 7 anos e 11 anos e 11 meses, leucodermas, em dentadura mista, sem queixas fonoaudiológicas. RESULTADOS: os achados evidenciam que a média das distâncias interincisivas máximas das crianças respiradoras bucais foi, no total da amostra, de 43,55mm, não apresentando diferença estatisticamente significativa entre as médias, segundo a idade. Não houve diferença estatisticamente significativa entre as médias da distância interincisiva máxima dos respiradores bucais e as médias dessa medida das crianças do grupo controle. CONCLUSÕES: a distância interincisiva máxima é uma medida que não variou nos respiradores bucais, durante a dentadura mista, segundo a idade, e parece não estar alterada em portadores desse tipo de disfunção. Aponta-se, também, a importância do uso do paquímetro na avaliação objetiva da distância interincisiva máxima.INTRODUCTION: The maximum interincisal distance is an important aspect in the orofacial myofunctional evaluation, because orofacial myofunctional disorders can limit the mouth opening. AIM: To describe the maximum interincisal distance of the mouth breathing children, according to age, and to compare the averages of the maximum interincisal distance of mouth breathing children to those of children with no history of speech-language pathology disorders. METHODS
G. Munhoven
2009-06-01
Full Text Available Many sensitivity studies have been carried out, using climate models of different degrees of complexity to test the climate response to Last Glacial Maximum boundary conditions. Here, instead of adding the forcings successively as in most previous studies, we applied the separation method of U. Stein et P. Alpert 1993, in order to determine rigorously the different contributions of the boundary condition modifications, and isolate the pure contributions from the interactions among the forcings. We carried out a series of sensitivity experiments with the model of intermediate complexity Planet Simulator, investigating the contributions of the ice sheet expansion and elevation, the lowering of the atmospheric CO2 and of the vegetation cover change on the LGM climate. The separation of the ice cover and orographic contributions shows that the ice albedo effect is the main contributor to the cooling of the Northern Hemisphere, whereas orography has only a local cooling impact over the ice sheets. The expansion of ice cover in the Northern Hemisphere causes a disruption of the tropical precipitation, and a southward shift of the ITCZ. The orographic forcing mainly contributes to the disruption of the atmospheric circulation in the Northern Hemisphere, leading to a redistribution of the precipitation, but weakly impacts the tropics. The isolated vegetation contribution also induces strong cooling over the continents of the Northern Hemisphere that further affects the tropical precipitation and reinforce the southward shift of the ITCZ, when combined with the ice forcing. The combinations of the forcings generate many non-linear interactions that reinforce or weaken the pure contributions, depending on the climatic mechanism involved, but they are generally weaker than the pure contributions. Finally, the comparison between the LGM simulated climate and climatic reconstructions over Eurasia suggests that our results reproduce well the south-west to
Wang, Jian; Meng, Xiaohong; Zheng, Wanqiu
2017-10-01
The elastic-wave reverse-time migration of inhomogeneous anisotropic media is becoming the hotspot of research today. In order to ensure the accuracy of the migration, it is necessary to separate the wave mode into P-wave and S-wave before migration. For inhomogeneous media, the Kelvin–Christoffel equation can be solved in the wave-number domain by using the anisotropic parameters of the mesh nodes, and the polarization vector of the P-wave and S-wave at each node can be calculated and transformed into the space domain to obtain the quasi-differential operators. However, this method is computationally expensive, especially for the process of quasi-differential operators. In order to reduce the computational complexity, the wave-mode separation of mixed domain can be realized on the basis of a reference model in the wave-number domain. But conventional interpolation methods and reference model selection methods reduce the separation accuracy. In order to further improve the separation effect, this paper introduces an inverse-distance interpolation method involving position shading and uses the reference model selection method of random points scheme. This method adds the spatial weight coefficient K, which reflects the orientation of the reference point on the conventional IDW algorithm, and the interpolation process takes into account the combined effects of the distance and azimuth of the reference points. Numerical simulation shows that the proposed method can separate the wave mode more accurately using fewer reference models and has better practical value.
G. Munhoven
2009-01-01
Full Text Available Many sensitivity studies have been carried out, using simplified GCMs to test the climate response to Last Glacial Maximum boundary conditions. Here, instead of adding the forcings successively as in previous studies, we applied the separation method of Stein and Alpert (1993, in order to determine rigourously the different contributions of the boundary condition modifications, and isolate the pure contributions from the interactions among the forcings. We carried out a series of sensitivity experiments with the model of intermediate complexity Planet Simulator, investigating the contributions of the ice sheet expansion and elevation, the lowering of the atmospheric CO2 and of the vegetation cover change on the LGM climate. The results clearly identify the ice cover forcing as the main contributor to the cooling of the Northern Hemisphere, and also to the tropical precipitation disruption, leading to the shouthward shift of the ITCZ, while the orographic forcing mainly contributes to the disruption of the atmospheric circulation in the Northern Hemisphere. The isolated vegetation contribution also induces strong cooling over the continents of the Northern Hemisphere, that is further sufficient to affect the tropical precipitation and reinforce the southwards shift of the ITCZ, when combined with the ice forcing. The combinations of the forcings generate many non linear interactions, that reinforce or weaken the pure contributions, depending on the climatic mechanism involved, but they are generally weaker than the pure contributions. Finally, the comparison between the LGM simulated climate and climatic reconstructions over Eurasia suggests that our results reproduce well the south-west to north-east temperature gradients over Eurasia.
Li, Yongming; Li, Fan; Wang, Pin; Zhu, Xueru; Liu, Shujun; Qiu, Mingguo; Zhang, Jingna; Zeng, Xiaoping
2016-10-01
Traditional age estimation methods are based on the same idea that uses the real age as the training label. However, these methods ignore that there is a deviation between the real age and the brain age due to accelerated brain aging. This paper considers this deviation and searches for it by maximizing the separability distance value rather than by minimizing the difference between the estimated brain age and the real age. Firstly, set the search range of the deviation as the deviation candidates according to prior knowledge. Secondly, use the support vector regression (SVR) as the age estimation model to minimize the difference between the estimated age and the real age plus deviation rather than the real age itself. Thirdly, design the fitness function based on the separability distance criterion. Fourthly, conduct age estimation on the validation dataset using the trained age estimation model, put the estimated age into the fitness function, and obtain the fitness value of the deviation candidate. Fifthly, repeat the iteration until all the deviation candidates are involved and get the optimal deviation with maximum fitness values. The real age plus the optimal deviation is taken as the brain pathological age. The experimental results showed that the separability was apparently improved. For normal control-Alzheimer’s disease (NC-AD), normal control-mild cognition impairment (NC-MCI), and MCI-AD, the average improvements were 0.178 (35.11%), 0.033 (14.47%), and 0.017 (39.53%), respectively. For NC-MCI-AD, the average improvement was 0.2287 (64.22%). The estimated brain pathological age could be not only more helpful to the classification of AD but also more precisely reflect accelerated brain aging. In conclusion, this paper offers a new method for brain age estimation that can distinguish different states of AD and can better reflect the extent of accelerated aging.
Dufour, Isabelle; Placko, Dominique
1993-06-01
This article deals with the study of a process based on the principle of eddy current sensors for the nondestructive evaluation of graphite composite plates. This research has been carried out in the Laboratoire d'Electricitd Signaux et Robotique by the team working on datacollecting sensors for robotics in collaboration with Aerospatiale. Eddy current sensors are characterized by their impedance, which varies when a conducting material is approached in their sensitive area. For a given sensor, the output signal depends directly on the electrical and geometrical properties of the object. In the case discussed here, the interesting data are the distance between the sensor and the object, and its local conductivity. In order to invert the relationships between the sensor signal and the properties of the material, an external parametrical model has been developed. A scanning of the surface with a sensor designed for good spatial resolution measurements gives two accurate maps of the useful data.
Influence of separating distance between atomic sensors for gravitational wave detection
Tang, Biao; Zhou, Lin; Wang, Jin; Zhan, Mingsheng
2015-01-01
We consider a recent scheme of gravitational wave detection using atomic interferometers as inertial sensors, and reinvestigate its configuration using the concept of sensitivity functions. We show that such configuration can suppress noise without influencing the gravitational wave signal. But the suppression is insufficient for the direct observation of gravitational wave signals, so we analyse the behaviour of the different noises influencing the detection scheme. As a novel method, we study the relations between the measurement sensitivity and the distance between two interferometers, and find that the results derived from vibration noise and laser frequency noise are in stark contrast to that derived from the shot noise, which is significant for the configuration design of gravitational wave detectors using atomic interferometers.
Berkovitz, Joseph
In this paper and its sequel, I consider the significance of Jarrett's and Shimony's analyses of the so-called factorisability (Bell-locality) condition for clarifying the nature of quantum non-locality. In this paper, I focus on four types of non-locality: superluminal signalling, action-at-a-distance, non-separability and holism. In the second paper, I consider a fifth type of non-locality: superluminal causation according to 'logically weak' concepts of causation, where causal dependence requires neither action nor signalling. In this connection, I pay special attention to the difficulties that superluminal causation raises in relativistic space-time. I conclude by evaluating the relevance of Jarrett's and Shimony's analyses for clarifying the question of the compatibility of quantum non-locality with relativity theory. My main conclusions are, first: these analyses are significant for clarifying the questions of superluminal signalling in quantum phenomena and for the compatibility of these phenomena with relativity. But, second, by contrast: these analyses are not very significant for the study of action-at-a distance, superluminal causation, non-separability and holism in quantum phenomena.
Rousta, Kamran; Bolton, Kim; Lundin, Magnus; Dahlén, Lisa
2015-06-01
The present study measures the participation of households in a source separation scheme and, in particular, if the household's application of the scheme improved after two interventions: (a) shorter distance to the drop-off point and (b) easy access to correct sorting information. The effect of these interventions was quantified and, as far as possible, isolated from other factors that can influence the recycling behaviour. The study was based on households located in an urban residential area in Sweden, where waste composition studies were performed before and after the interventions by manual sorting (pick analysis). Statistical analyses of the results indicated a significant decrease (28%) of packaging and newsprint in the residual waste after establishing a property close collection system (intervention (a)), as well as significant decrease (70%) of the miss-sorted fraction in bags intended for food waste after new information stickers were introduced (intervention (b)). Providing a property close collection system to collect more waste fractions as well as finding new communication channels for information about sorting can be used as tools to increase the source separation ratio. This contribution also highlights the need to evaluate the effects of different types of information and communication concerning sorting instructions in a property close collection system.
Ri, Yong-Wu; Im, Song-Jin
2014-01-01
The modified Beer-Lambert law (MBL) and the spatially resolved spectroscopy are used to measure the tissue oxidation in muscles and brains by the continuous wave near-infrared spectroscopy. The spatially resolved spectroscopy predicts the change in the concentration of the absorber by measuring the slope of attenuation data according to the separation and calculating the absorption coefficients of tissue on the basis of the slop in attenuation at the separation distance satisfying the linearity of this slop. This study analyzed the appropriate source-detector separation distance by using the diffuse approximation resolution for photon migration when predicting the absorption coefficient by the spatially resolved spectroscopy on the basis of the reflective image of the tissue. We imagine the 3 dimensional attenuation image with the absorption coefficient, reduced scattering coefficient and separation distance as its axes and obtained the attenuation data cube by calculating the attenuation on a certain interva...
Eduardo Luiz Cavalcanti Caldas
2015-01-01
Full Text Available The study was aimed to test the effect of the separation distance between males and females during the preconditioning period on the reproductive performance of Santa Inês ewes after the male effect. Santa Inês ewes were kept at distances of 3000 m (T1, 3 m (T2, and 300 m (T3 from rams for 60 days before starting 45-day mating seasons during the dry period (DP and rainy periods (RP. Mating events were observed daily at 6:00 h and 16:00 h by trained personnel for one hour intervals. Estrous were scored as synchronized when observed until day 5 after breeding season start. Pregnancy diagnosis was performed by ultrasonography. In the DP, the first estrous averaged at 15.45±10.36 (T1, 9.25±6.41 (T2 and 13.05±10.24 (T3 days and in RP was 8.73±5.84 (T1, 9.30±5.62 (T2 and 6.10±5.66 (T3 days. All females cycled during both DP and RP. Estrous synchronization occurred in 20% of the females during DP (T1: 30%, T2: 15%, and T3: 15%. In the RP, estrous synchronization occurred in 40% of all females (T1: 30%, T2: 35%, and T3: 45%. The pregnancy rates in DP and RP were T1: 85%, T2: 80%, and T3: 75%. The results show that the male effect can be obtained simply by avoiding physical contact between males and females throughout the year under tropical conditions.
Fulgueras, Alyssa Marie; Poudel, Jeeban; Kim, Dong Sun; Cho, Jungho [Kongju National University, Cheonan (Korea, Republic of)
2016-01-15
The separation of ethylenediamine (EDA) from aqueous solution is a challenging problem because its mixture forms an azeotrope. Pressure-swing distillation (PSD) as a method of separating azeotropic mixture were investigated. For a maximum-boiling azeotropic system, pressure change does not greatly affect the azeotropic composition of the system. However, the feasibility of using PSD was still analyzed through process simulation. Experimental vapor liquid equilibrium data of water-EDA system was studied to predict the suitability of thermodynamic model to be applied. This study performed an optimization of design parameters for each distillation column. Different combinations of operating pressures for the low- and high-pressure columns were used for each PSD simulation case. After the most efficient operating pressures were identified, two column configurations, low-high (LP+HP) and high-low (HP+ LP) pressure column configuration, were further compared. Heat integration was applied to PSD system to reduce low and high temperature utility consumption.
Sabra, Georges; Vermette, Patrick
2013-02-01
The aim of this study was to develop an in vitro cell culture system allowing studying the effect of separation distance between monolayers of rat insulinoma cells (INS-1) and human umbilical vein endothelial cells (HUVEC) co-cultured in fibrin over INS-1 cell insulin secretion. For this purpose, a three-dimensional (3D) cell culture chamber was designed, built using micro-fabrication techniques and validated. The co-culture was successfully carried out and the effect on INS-1 cell insulin secretion was investigated. After 48 and 72 h, INS-1 cells co-cultured with HUVEC separated by a distance of 100 µm revealed enhanced insulin secretion compared to INS-1 cells cultured alone or co-cultured with HUVEC monolayers separated by a distance of 200 µm. These results illustrate the importance of the separation distance between two cell niches for cell culture design and the possibility to further enhance the endocrine function of beta cells when this factor is considered.
大型LNG储罐防火间距分析%Analysis on separation distance of large LNG tank
闫晓; 赵东风; 孟亦飞
2013-01-01
国内LNG接收站产业发展日益壮大,LNG储罐的规模也随之呈现大型化的趋势,其带来对周边储罐的安全问题成为关注的焦点.针对大型LNG储罐防火间距的分析,依据国际广泛接受的美国NFPA 59A-2009和欧洲EN1473-2007标准,分别采用事故后果模拟手段和危险性评估方法确定储罐防火间距,事故场景分别考虑了罐顶池火灾和卸料管线发生直径50mm孔洞泄漏火灾.在此基础之上,对事故后果模拟得到的结果进行分析,明确储罐防火间距,从而为企业对LNG储罐区进行布局设计提供参考指导.%With the growing of domestic LNG receiving terminal industry,the size of LNG storage tank also presents large-scale trend,it causes the safety problem to surrounding tanks and becomes focus of attention.Aimed at separation distance analysis of large LNG tank,the accident consequence simulation method and risk assessment method were adopted to determine container spacing according to the international widely accepted American NFPA 59A-2009 and European EN1473-2007 standards,accident scenario were considered tank roof pool fire and leakage fire by failure of 50mm diameter hole on unloading line.On this basis,the accident consequence simulation results were analyzed,and container spacing was determined,so as to provide guidance for enterprise on the layout design of LNG tank farm.
Santamaria, L.; Siller, H. R. [Tecnológico de Monterrey, Eugenio Garza Sada 2501 Sur, Monterrey, N.L., 64849 (Mexico); Garcia-Ortiz, C. E., E-mail: cegarcia@cicese.mx [CONACYT Research Fellow – CICESE, Unidad Monterrey, Alianza Centro 504, Apodaca, NL, 66629 (Mexico); Cortes, R.; Coello, V. [CICESE, Unidad Monterrey, PIIT, Alianza Centro 504, Apodaca, NL, 66629 (Mexico)
2016-04-15
In this work, we present an alternative optical method to determine the probe-sample separation distance in a scanning near-field optical microscope. The experimental method is based in a Lloyd’s mirror interferometer and offers a measurement precision deviation of ∼100 nm using digital image processing and numerical analysis. The technique can also be strategically combined with the characterization of piezoelectric actuators and stability evaluation of the optical system. It also opens the possibility for the development of an automatic approximation control system valid for probe-sample distances from 5 to 500 μm.
Da Costa, M J; Colson, G; Frost, T J; Halley, J; Pesti, G M
2017-09-01
The objective of this experiment was to determine the maximum net returns digestible lysine (dLys) levels (MNRL) when maintaining the ideal amino acid ratio for starter diets of broilers raised sex separate or comingled (straight-run). A total of 3,240 Ross 708 chicks was separated by sex and placed in 90 pens by 2 rearing types: sex separate (36 males or 36 females) or straight-run (18 males + 18 females). Each rearing type was fed 6 starter diets (25 d) formulated to have dLys levels between 1.05 and 1.80%. A common grower diet with 1.02% of dLys was fed from 25 to 32 days. Body weight gain (BWG) and feed intake were assessed at 25 and 32 d for performance evaluation. Additionally, at 26 and 33 d, 4 birds per pen were sampled for carcass yield evaluation. Data were modeled using response surface methodology in order to estimate feed intake and whole carcass weight at 1,600 g live BW. Returns over feed cost were estimated for a 1.8-million-broiler complex of each rearing system under 9 feed/meat price scenarios. Results indicated that females needed more feed to reach market weight, followed by straight-run birds, and then males. At medium meat and feed prices, female birds had MNRL at 1.07% dLys, whereas straight-run and males had MNRL at 1.05%. As feed and meat prices increased, females had MNRL increased up to 1.15% dLys. Sex separation resulted in increased revenue under certain feed and meat prices, and before sex separation cost was deducted. When the sexing cost was subtracted from the returns, sex separation was not shown to be economically viable when targeting birds for light market BW. © 2017 Poultry Science Association Inc.
2010-04-01
... distances of ammonium nitrate and blasting agents from explosives or blasting agents. 555.220 Section 555... ammonium nitrate and blasting agents from explosives or blasting agents. Table: Department of Defense... Blasting agent Minimum thickness of artificial barricades (in.) 100 3 11 12 100 300 4 14 12 300 600 5 18...
Safavi, Molood S; Husain, Samar; Vasishth, Shravan
2016-01-01
Delaying the appearance of a verb in a noun-verb dependency tends to increase processing difficulty at the verb; one explanation for this locality effect is decay and/or interference of the noun in working memory. Surprisal, an expectation-based account, predicts that delaying the appearance of a verb either renders it no more predictable or more predictable, leading respectively to a prediction of no effect of distance or a facilitation. Recently, Husain et al. (2014) suggested that when the exact identity of the upcoming verb is predictable (strong predictability), increasing argument-verb distance leads to facilitation effects, which is consistent with surprisal; but when the exact identity of the upcoming verb is not predictable (weak predictability), locality effects are seen. We investigated Husain et al.'s proposal using Persian complex predicates (CPs), which consist of a non-verbal element-a noun in the current study-and a verb. In CPs, once the noun has been read, the exact identity of the verb is highly predictable (strong predictability); this was confirmed using a sentence completion study. In two self-paced reading (SPR) and two eye-tracking (ET) experiments, we delayed the appearance of the verb by interposing a relative clause (Experiments 1 and 3) or a long PP (Experiments 2 and 4). We also included a simple Noun-Verb predicate configuration with the same distance manipulation; here, the exact identity of the verb was not predictable (weak predictability). Thus, the design crossed Predictability Strength and Distance. We found that, consistent with surprisal, the verb in the strong predictability conditions was read faster than in the weak predictability conditions. Furthermore, greater verb-argument distance led to slower reading times; strong predictability did not neutralize or attenuate the locality effects. As regards the effect of distance on dependency resolution difficulty, these four experiments present evidence in favor of working memory
李凤娥
2012-01-01
对磁共振无线电能传输系统的最大传输距离问题进行了电路模型研究,先描述了与最大传输距离密切相关的频率分裂现象,进而定义了频率分裂方程、脊方程、谷方程,随后利用脊方程确定了系统的频率分裂临界点,频率分裂临界点对应的传输距离就是系统的最大传输距离.探讨了系统最大传输距离与系统关键参数的关系.最后,利用文献中已有的实验数据,对上述理论进行了实验验证.%Circuit analysis is employed to investigate the maximum transfer distance problem in magnetic resonance wireless power transmission systems. It is described firstly the frequency splitting phenomena that are closely related to the maximum transfer distance problem. Next, the splitting equation, the ridge equation and the trough equation are defined, and the critical splitting point is found through the ridge equation. The maximum transfer distance is uniquely determined by the critical splitting point, and the relationship between the maximum transfer distance and the key system parameters is elucidated. Finally, above theory is validated by the experimental data from the literature.
Laffan, Shawn W; Wang, Zhaoyuan; Ward, Michael P
2011-12-01
The definition of the spatial relatedness between infectious and susceptible animal groups is a fundamental component of spatio-temporal modelling of disease outbreaks. A common neighbourhood definition for disease spread in wild and feral animal populations is the distance between the centroids of neighbouring group home ranges. This distance can be used to define neighbourhood interactions, and also to describe the probability of successful disease transmission. Key limitations of this approach are (1) that a susceptible neighbour of an infectious group with an overlapping home range - but whose centroid lies outside the home range of an infectious group - will not be considered for disease transmission, and (2) the degree of overlap between the home ranges is not taken into account for those groups with centroids inside the infectious home range. We assessed the impact of both distance-based and range overlap methods of disease transmission on model-predicted disease spread. Range overlap was calculated using home ranges modelled as circles. We used the Sirca geographic automata model, with the population data from a nine-county study area in Texas that we have previously described. For each method we applied 100 model repetitions, each of 100 time steps, to 30 index locations. The results show that the rate of disease spread for the range-overlap method is clearly less than the distance-based method, with median outbreaks modelled using the latter being 1.4-1.45 times larger. However, the two methods show similar overall trends in the area infected, and the range-overlap median (48 and 120 for cattle and pigs, respectively) falls within the 5th-95th percentile range of the distance-based method (0-96 and 0-252 for cattle and pigs, respectively). These differences can be attributed to the calculation of the interaction probabilities in the two methods, with overlap weights generally resulting in lower interaction probabilities. The definition of spatial
Study on maximum distance testing with low power dissipation%降低最大距离测试码输入功耗研究
张鼎; 徐拾义
2014-01-01
Random testing has been long employed for testing of faults in digital systems. However, there are some fatal defects of it due to its low efficiency in testing. Aiming at this problem, a new concept of distance between test patterns is proposed. It is known that the larger distance between two test patterns the more different faults can be detected by these two patterns. Therefore, a new pseudo-random testing is proposed earlier called distance based random testing which can be more efficient in testing than that of traditional one. On the other hand, since the distance between two patterns in this method is large enough so that the power dissipation of applying test sequence is greatly increased when testing. This paper is just to present a novel way of changing the order of test patterns in the sequence when applying the tests so as to reduce the power dissipation as much as possible to reach the objective of lowering the power dissipation in testing.%伪随机测试在数字系统的故障测试中已经得到了多年的应用，但传统的伪随机测试存在着效率比较低的缺陷。针对该缺陷提出了在伪随机测试方法中引入测试码之间距离的概念。根据测试码之间距离越大，能检测到不同故障的数目概率也越大的假设，基于测试码之间距离的随机测试法（简称基于距离测试法）可以生成一组测试码序列。但是由于基于距离测试法所生成的测试码相邻间距离的变大，将造成相邻输入码之间的跳变次数增多，使得输入测试码时所需要的功耗急剧增大。针对该情况，提出对伪随机测试法生成的测试码输入顺序进行重新排序和调整的概念，从而达到降低测试功耗的最终目标。
Cortesi, Nicola; Peña-Angulo, Dhais; Simolo, Claudia; Stepanek, Peter; Brunetti, Michele; Gonzalez-Hidalgo, José Carlos
2014-05-01
One of the key point in the develop of the MOTEDAS dataset (see Poster 1 MOTEDAS) in the framework of the HIDROCAES Project (Impactos Hidrológicos del Calentamiento Global en España, Spanish Ministery of Research CGL2011-27574-C02-01) is the reference series for which no generalized metadata exist. In this poster we present an analysis of spatial variability of monthly minimum and maximum temperatures in the conterminous land of Spain (Iberian Peninsula, IP), by using the Correlation Decay Distance function (CDD), with the aim of evaluating, at sub-regional level, the optimal threshold distance between neighbouring stations for producing the set of reference series used in the quality control (see MOTEDAS Poster 1) and the reconstruction (see MOREDAS Poster 3). The CDD analysis for Tmax and Tmin was performed calculating a correlation matrix at monthly scale between 1981-2010 among monthly mean values of maximum (Tmax) and minimum (Tmin) temperature series (with at least 90% of data), free of anomalous data and homogenized (see MOTEDAS Poster 1), obtained from AEMEt archives (National Spanish Meteorological Agency). Monthly anomalies (difference between data and mean 1981-2010) were used to prevent the dominant effect of annual cycle in the CDD annual estimation. For each station, and time scale, the common variance r2 (using the square of Pearson's correlation coefficient) was calculated between all neighbouring temperature series and the relation between r2 and distance was modelled according to the following equation (1): Log (r2ij) = b*°dij (1) being Log(rij2) the common variance between target (i) and neighbouring series (j), dij the distance between them and b the slope of the ordinary least-squares linear regression model applied taking into account only the surrounding stations within a starting radius of 50 km and with a minimum of 5 stations required. Finally, monthly, seasonal and annual CDD values were interpolated using the Ordinary Kriging with a
Representing distance, consuming distance
Larsen, Gunvor Riber
to mobility and its social context. Such an understanding can be approached through representations, as distance is being represented in various ways, most noticeably in maps and through the notions of space and Otherness. The question this talk subsequently asks is whether these representations of distance...... are being consumed in the contemporary society, in the same way as places, media, cultures and status are being consumed (Urry 1995, Featherstone 2007). An exploration of distance and its representations through contemporary consumption theory could expose what role distance plays in forming...... are present in theoretical and empirical elaborations on mobility, but these remain largely implicit and unchallenged (Bauman 1998). This talk will endeavour to unmask distance as a theoretical entity by exploring ways in which distance can be understood and by discussing distance through its representations...
Kinkhabwala, Ali
2013-01-01
The most fundamental problem in statistics is the inference of an unknown probability distribution from a finite number of samples. For a specific observed data set, answers to the following questions would be desirable: (1) Estimation: Which candidate distribution provides the best fit to the observed data?, (2) Goodness-of-fit: How concordant is this distribution with the observed data?, and (3) Uncertainty: How concordant are other candidate distributions with the observed data? A simple unified approach for univariate data that addresses these traditionally distinct statistical notions is presented called "maximum fidelity". Maximum fidelity is a strict frequentist approach that is fundamentally based on model concordance with the observed data. The fidelity statistic is a general information measure based on the coordinate-independent cumulative distribution and critical yet previously neglected symmetry considerations. An approximation for the null distribution of the fidelity allows its direct conversi...
徐君; 徐富红; 蔡体健; 王彩玲; 黄德昌; 李伟平
2015-01-01
In hyperspectral unmixing, PPI algorithm is a relatively mature algorithm, but each projection vector in PPI algorithm is generated randomly, and the endmembers extracted by PPI algorithm are not stable. That is, different endmembers can be obtained from the same image by repeatedly running PPI algorithm. This paper, based on the convex geometry description of linear spectral mixing model, utilized the feature that the endmem-bers are the endpoints of the single convex body enclosed in the hyperspectral image feature space, and proposed a novel pure pixel index algorithm for endmember extraction based on the maximum distance. The average of the spectral vectors of all the sample points is calculated and used as the center of a hypersphere. Next, we calcu-late the Euclidean distances of all the sample points to the center of the hypersphere, and design a radius of equal to or greater than the maximum distance for the hypersphere in the feature space to include all of the sample points. We evenly select the reference points on the surface of the hypersphere. The farthest sample point with re-spect to each reference point can be found by calculating the Euclidean distance. Subsequently, every sample point’s frequency of being the most distant to the reference points is recorded as an index to evaluate whether the sample point is an endmember or not. Finally, we use the AVIRIS data of Nevada Cuprite to testify this algo-rithm. The experimental results illustrate that the precision of the endmember extraction using the algorithm pro-posed in this paper is better than N-FINDR algorithm and VCA algorithm in general. Moreover, it has a good ro-bustness and could overcome the instability of PPI algorithm caused by random projection.%在高光谱混合像元分解中，PPI算法是一种比较成熟的算法，但PPI算法中每次投影向量的生成都是随机的，多次执行PPI算法后端元提取的结果并不稳定。本文以线性
Skarstrom, C.
1959-03-10
A centrifugal separator is described for separating gaseous mixtures where the temperature gradients both longitudinally and radially of the centrifuge may be controlled effectively to produce a maximum separation of the process gases flowing through. Tbe invention provides for the balancing of increases and decreases in temperature in various zones of the centrifuge chamber as the result of compression and expansions respectively, of process gases and may be employed effectively both to neutralize harmful temperature gradients and to utilize beneficial temperaturc gradients within the centrifuge.
1997-12-01
A study reviewing the existing Army Distance Learning Plan (ADLP) and current Distance Learning practices, with a focus on the Army’s training and...educational challenges and the benefits of applying Distance Learning techniques. The ASB study panel makes six specific recommendations, the most
李杨
2015-01-01
For a long time,in order to improve the distribution efficiency,the logistical industry is very concerned about the distribution route optimization.But the reality is,the real travel time which can be compressed is very limited,and the proportion in the process of the total distribution is not high.As a matter of fact,sort-out,unloading and handover sector,especially the mixed-up stowage phenomenon for improper separation are the true causes which influence the efficiency of the distribution.This paper makes analysis on the distribution process of mixed-up stowage and improper separation,with the help of separate-lots technology and operating procedures on marine shipping,discusses on separate-lots technology and principles of loading goods in short distance delivery by vehicles,puts forward the corresponding solutions.%长期以来，物流行业非常关注配送线路优化，借以提升配送效率。但是现实情况是真正的行驶时间可压缩空间很小，而且在总的配送过程中比例不大。真正影响配送效率的是理货卸车交接环节，特别是因隔票不清导致的混票现象。文中对配送过程的混票和隔票不清的过程进行分析，借助海运中隔票技术和操作规程，对短途配送中车辆配装的隔票技术和原则进行讨论，提出对应的解决对策。
Bennett, Charles H; Li, Ming; Vitanyi, Paul M B; Zurek, Wojciech H
2010-01-01
While Kolmogorov complexity is the accepted absolute measure of information content in an individual finite object, a similarly absolute notion is needed for the information distance between two individual objects, for example, two pictures. We give several natural definitions of a universal information metric, based on length of shortest programs for either ordinary computations or reversible (dissipationless) computations. It turns out that these definitions are equivalent up to an additive logarithmic term. We show that the information distance is a universal cognitive similarity distance. We investigate the maximal correlation of the shortest programs involved, the maximal uncorrelation of programs (a generalization of the Slepian-Wolf theorem of classical information theory), and the density properties of the discrete metric spaces induced by the information distances. A related distance measures the amount of nonreversibility of a computation. Using the physical theory of reversible computation, we give...
Cacti with maximum Kirchhoff index
Wang, Wen-Rui; Pan, Xiang-Feng
2015-01-01
The concept of resistance distance was first proposed by Klein and Randi\\'c. The Kirchhoff index $Kf(G)$ of a graph $G$ is the sum of resistance distance between all pairs of vertices in $G$. A connected graph $G$ is called a cactus if each block of $G$ is either an edge or a cycle. Let $Cat(n;t)$ be the set of connected cacti possessing $n$ vertices and $t$ cycles, where $0\\leq t \\leq \\lfloor\\frac{n-1}{2}\\rfloor$. In this paper, the maximum kirchhoff index of cacti are characterized, as well...
McQuinn, Kristen B W; Dolphin, Andrew E; Berg, Danielle; Kennicutt, Robert
2016-01-01
Great investments of observing time have been dedicated to the study of nearby spiral galaxies with diverse goals ranging from understanding the star formation process to characterizing their dark matter distributions. Accurate distances are fundamental to interpreting observations of these galaxies, yet many of the best studied nearby galaxies have distances based on methods with relatively large uncertainties. We have started a program to derive accurate distances to these galaxies. Here we measure the distance to M51 - the Whirlpool galaxy - from newly obtained Hubble Space Telescope optical imaging using the tip of the red giant branch method. We measure the distance modulus to be 8.58+/-0.10 Mpc (statistical), corresponding to a distance modulus of 29.67+/-0.02 mag. Our distance is an improvement over previous results as we use a well-calibrated, stable distance indicator, precision photometry in a optimally selected field of view, and a Bayesian Maximum Likelihood technique that reduces measurement unce...
Distance Computation Between Non-Holonomic Motions with Constant Accelerations
Enrique J. Bernabeu
2013-09-01
Full Text Available A method for computing the distance between two moving robots or between a mobile robot and a dynamic obstacle with linear or arc‐like motions and with constant accelerations is presented in this paper. This distance is obtained without stepping or discretizing the motions of the robots or obstacles. The robots and obstacles are modelled by convex hulls. This technique obtains the future instant in time when two moving objects will be at their minimum translational distance ‐ i.e., at their minimum separation or maximum penetration (if they will collide. This distance and the future instant in time are computed in parallel. This method is intended to be run each time new information from the world is received and, consequently, it can be used for generating collision‐free trajectories for non‐holonomic mobile robots.
Distance learning perspectives.
Pandza, Haris; Masic, Izet
2013-01-01
The development of modern technology and the Internet has enabled the explosive growth of distance learning. distance learning is a process that is increasingly present in the world. This is the field of education focused on educating students who are not physically present in the traditional classrooms or student's campus. described as a process where the source of information is separated from the students in space and time. If there are situations that require the physical presence of students, such as when a student is required to physically attend the exam, this is called a hybrid form of distance learning. This technology is increasingly used worldwide. The Internet has become the main communication channel for the development of distance learning.
Maximum Autocorrelation Factorial Kriging
Nielsen, Allan Aasbjerg; Conradsen, Knut; Pedersen, John L.
2000-01-01
This paper describes maximum autocorrelation factor (MAF) analysis, maximum autocorrelation factorial kriging, and its application to irregularly sampled stream sediment geochemical data from South Greenland. Kriged MAF images are compared with kriged images of varimax rotated factors from...
An Investigation into Separation of Impurity from Saffron Stigma Using an Electrostatic Separator
H Mortezapour
2015-03-01
Full Text Available In the present study, a laboratory electrostatic separator was constructed and its separation potential of white saffron impurities from stigma was investigated. The device was comprised of a nylon ribbon which moves in contact with a woolen brush and was charged by the triboelectric effect. The charged ribbon, then, moved over the material pan. Since the electrostatic behavior vary from various materials, their attraction to the ribbon differ. The separation tests were conducted at three levels of ribbon position (with 1.5, 2.5 and 3.5 cm from the material pan, three drum speeds (50, 60 and 70 rpm and three working times (120, 18 and 240 seconds. The results showed that material absorption increased as working time increased and the ribbon distance decreased. Meanwhile, rising the speed from 50 to 60 rpm improved material absorption while, more increasing from 60 to 70 rpm reduced the absorption. A maximum impurity separation of 97% was observed with ribbon distance of 1.5 cm, ribbon speed of 60 rpm and working for 240 seconds. The minimum stigma losses were found to be about 2% when the ribbon distance and speed were 3.5 cm and 70 rpm, respectively, and the separator worked for 120 seconds.
Distance learning for similarity estimation.
Yu, Jie; Amores, Jaume; Sebe, Nicu; Radeva, Petia; Tian, Qi
2008-03-01
In this paper, we present a general guideline to find a better distance measure for similarity estimation based on statistical analysis of distribution models and distance functions. A new set of distance measures are derived from the harmonic distance, the geometric distance, and their generalized variants according to the Maximum Likelihood theory. These measures can provide a more accurate feature model than the classical Euclidean and Manhattan distances. We also find that the feature elements are often from heterogeneous sources that may have different influence on similarity estimation. Therefore, the assumption of single isotropic distribution model is often inappropriate. To alleviate this problem, we use a boosted distance measure framework that finds multiple distance measures which fit the distribution of selected feature elements best for accurate similarity estimation. The new distance measures for similarity estimation are tested on two applications: stereo matching and motion tracking in video sequences. The performance of boosted distance measure is further evaluated on several benchmark data sets from the UCI repository and two image retrieval applications. In all the experiments, robust results are obtained based on the proposed methods.
Unit distances and diameters in Euclidean spaces
Swanepoel, Konrad J
2007-01-01
We show that the maximum number of unit distances or of diameters in a set of n points in d-dimensional Euclidean space is attained only by specific types of Lenz constructions, for all d >= 4 and n sufficiently large, depending on d. As a corollary we determine the exact maximum number of unit distances for all even d >= 6, and the exact maximum number of diameters for all d >= 4, for all $n$ sufficiently large, depending on d.
[Travel time and distances to Norwegian out-of-hours casualty clinics].
Raknes, Guttorm; Morken, Tone; Hunskår, Steinar
2014-11-01
Geographical factors have an impact on the utilisation of out-of-hours services. In this study we have investigated the travel distance to out-of-hours casualty clinics in Norwegian municipalities in 2011 and the number of municipalities covered by the proposed recommendations for secondary on-call arrangements due to long distances. We estimated the average maximum travel times and distances in Norwegian municipalities using a postcode-based method. Separate analyses were performed for municipalities with a single, permanently located casualty clinic. Altogether 417 out of 430 municipalities were included. We present the median value of the maximum travel times and distances for the included municipalities. The median maximum average travel distance for the municipalities was 19 km. The median maximum average travel time was 22 minutes. In 40 of the municipalities (10 %) the median maximum average travel time exceeded 60 minutes, and in 97 municipalities (23 %) the median maximum average travel time exceeded 40 minutes. The population of these groups comprised 2 % and 5 % of the country's total population respectively. For municipalities with permanent emergency facilities(N = 316), the median average flight time 16 minutes and median average distance 13 km.. In many municipalities, the inhabitants have a long average journey to out-of-hours emergency health services, but seen as a whole, the inhabitants of these municipalities account for a very small proportion of the Norwegian population. The results indicate that the proposed recommendations for secondary on-call duty based on long distances apply to only a small number of inhabitants. The recommendations should therefore be adjusted and reformulated to become more relevant.
Distance effects in electrochemical micromachining
Xu, Lizhong; Pan, Yue; Zhao, Chuanjun
2016-09-01
Considering exponential dependence of currents on double-layer voltage and the feedback effect of the electrolyte resistance, a distance effect in electrochemical micromachining is found, namely that both time constant and double-layer voltage depend on the separation of electrodes. The double-layer voltage is the real voltage used in processing. Under DC voltage, the apparent voltages between two electrodes are constant for different separations, but the real voltages change with the separations. Small separations exert substantial effects on the real voltages. Accordingly, a DC-voltage small-separation electrochemical micromachining technique was proposed. The double-layer voltage drops sharply as the small separation increases. Thus, the electrochemical reactions are confined to electrode regions in very close proximity even under DC voltage. The machining precision can be significantly enhanced by reducing the voltage and separation between electrodes. With this technique, the machining of conducting materials with submicrometre precision was achieved.
McQuinn, Kristen. B. W.; Skillman, Evan D.; Dolphin, Andrew E.; Berg, Danielle; Kennicutt, Robert
2016-11-01
M104 (NGC 4594; the Sombrero galaxy) is a nearby, well-studied elliptical galaxy included in scores of surveys focused on understanding the details of galaxy evolution. Despite the importance of observations of M104, a consensus distance has not yet been established. Here, we use newly obtained Hubble Space Telescope optical imaging to measure the distance to M104 based on the tip of the red giant branch (TRGB) method. Our measurement yields the distance to M104 to be 9.55 ± 0.13 ± 0.31 Mpc equivalent to a distance modulus of 29.90 ± 0.03 ± 0.07 mag. Our distance is an improvement over previous results as we use a well-calibrated, stable distance indicator, precision photometry in a optimally selected field of view, and a Bayesian maximum likelihood technique that reduces measurement uncertainties. The most discrepant previous results are due to Tully-Fisher method distances, which are likely inappropriate for M104 given its peculiar morphology and structure. Our results are part of a larger program to measure accurate distances to a sample of well-known spiral galaxies (including M51, M74, and M63) using the TRGB method. Based on observations made with the NASA/ESA Hubble Space Telescope, obtained from the Data Archive at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555.
McQuinn, Kristen. B. W.; Skillman, Evan D.; Dolphin, Andrew E.; Berg, Danielle; Kennicutt, Robert
2016-07-01
Great investments of observing time have been dedicated to the study of nearby spiral galaxies with diverse goals ranging from understanding the star formation process to characterizing their dark matter distributions. Accurate distances are fundamental to interpreting observations of these galaxies, yet many of the best studied nearby galaxies have distances based on methods with relatively large uncertainties. We have started a program to derive accurate distances to these galaxies. Here we measure the distance to M51—the Whirlpool galaxy—from newly obtained Hubble Space Telescope optical imaging using the tip of the red giant branch method. We measure the distance modulus to be 8.58 ± 0.10 Mpc (statistical), corresponding to a distance modulus of 29.67 ± 0.02 mag. Our distance is an improvement over previous results as we use a well-calibrated, stable distance indicator, precision photometry in a optimally selected field of view, and a Bayesian Maximum Likelihood technique that reduces measurement uncertainties. Based on observations made with the NASA/ESA Hubble Space Telescope, obtained from the Data Archive at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555.
Distance effects in electrochemical micromachining
2016-01-01
Considering exponential dependence of currents on double-layer voltage and the feedback effect of the electrolyte resistance, a distance effect in electrochemical micromachining is found, namely that both time constant and double-layer voltage depend on the separation of electrodes. The double-layer voltage is the real voltage used in processing. Under DC voltage, the apparent voltages between two electrodes are constant for different separations, but the real voltages change with the separat...
Maximum Autocorrelation Factorial Kriging
Nielsen, Allan Aasbjerg; Conradsen, Knut; Pedersen, John L.; Steenfelt, Agnete
2000-01-01
This paper describes maximum autocorrelation factor (MAF) analysis, maximum autocorrelation factorial kriging, and its application to irregularly sampled stream sediment geochemical data from South Greenland. Kriged MAF images are compared with kriged images of varimax rotated factors from an ordinary non-spatial factor analysis, and they are interpreted in a geological context. It is demonstrated that MAF analysis contrary to ordinary non-spatial factor analysis gives an objective discrimina...
The Distance Field Model and Distance Constrained MAP Adaptation Algorithm
YUPeng; WANGZuoying
2003-01-01
Spatial structure information, i.e., the rel-ative position information of phonetic states in the feature space, is long to be carefully researched yet. In this pa-per, a new model named “Distance Field” is proposed to describe the spatial structure information. Based on this model, a modified MAP adaptation algorithm named dis-tance constrained maximum a poateriori (DCMAP) is in-troduced. The distance field model gives large penalty when the spatial structure is destroyed. As a result the DCMAP reserves the spatial structure information in adaptation process. Experiments show the Distance Field Model improves the performance of MAP adapta-tion. Further results show DCMAP has strong cross-state estimation ability, which is used to train a well-performed speaker-dependent model by data from only part of pho-
Alternative Multiview Maximum Entropy Discrimination.
Chao, Guoqing; Sun, Shiliang
2016-07-01
Maximum entropy discrimination (MED) is a general framework for discriminative estimation based on maximum entropy and maximum margin principles, and can produce hard-margin support vector machines under some assumptions. Recently, the multiview version of MED multiview MED (MVMED) was proposed. In this paper, we try to explore a more natural MVMED framework by assuming two separate distributions p1( Θ1) over the first-view classifier parameter Θ1 and p2( Θ2) over the second-view classifier parameter Θ2 . We name the new MVMED framework as alternative MVMED (AMVMED), which enforces the posteriors of two view margins to be equal. The proposed AMVMED is more flexible than the existing MVMED, because compared with MVMED, which optimizes one relative entropy, AMVMED assigns one relative entropy term to each of the two views, thus incorporating a tradeoff between the two views. We give the detailed solving procedure, which can be divided into two steps. The first step is solving our optimization problem without considering the equal margin posteriors from two views, and then, in the second step, we consider the equal posteriors. Experimental results on multiple real-world data sets verify the effectiveness of the AMVMED, and comparisons with MVMED are also reported.
2015-01-01
In the thermal infrared (TIR) waveband, solving the target emissivity spectrum and temperature leads to an ill-posed problem in which the number of unknown parameters is larger than that of available measurements. Generally, the approaches developed for solving this kind of problems are called, by a joint name, the TES (temperature and emissivity separation) algorithm. As is shown in the name, the TES algorithm is dedicated to separating the target temperature and emissivity in the calculating procedure. In this paper, a novel method called the new MaxEnt (maximum entropy) TES algorithm is proposed, which is considered as a promotion of the MaxEnt TES algorithm proposed by Barducci. The maximum entropy estimation is utilized as the basic framework in the two preceding algorithms, so that the two algorithms both could make temperature and emissivity separation, independent of experiential information derived by some special data bases. As a result, the two algorithms could be applied to solve the temperature and emissivity spectrum of the targets which are absolutely unknown to us. However, what makes the two algorithms different is that the alpha spectrum derived by the ADE (alpha derived emissivity) method is considered as priori information to be added in the new MaxEnt TES algorithm. Based on the Wien approximation, the ADE method is dedicated to the calculation of the alpha spectrum which has a similar distribution to the true emissivity spectrum. Based on the preceding promotion, the new MaxEnt TES algorithm keeps a simpler mathematical formalism. Without any doubt, the new MaxEnt TES algorithm provides a faster computation for large volumes of data (i.e. hyperspectral images of the Earth). Some numerical simulations have been performed; the data and results show that, the maximum RMSE of emissivity estimation is 0.017, the maximum absolute error of temperature estimation is 0.62 K. Added with Gaussian white noise in which the signal to noise ratio is measured
McQuinn, Kristen B W; Dolphin, Andrew E; Berg, Danielle; Kennicutt, Robert
2016-01-01
M104 (NGC 4594; the Sombrero galaxy) is a nearby, well-studied elliptical galaxy included in scores of surveys focused on understanding the details of galaxy evolution. Despite the importance of observations of M104, a consensus distance has not yet been established. Here, we use newly obtained Hubble Space Telescope optical imaging to measure the distance to M104 based on the tip of the red giant branch method. Our measurement yields the distance to M104 to be 9.55 +/- 0.13 +/- 0.31 Mpc equivalent to a distance modulus of 29.90 +/- 0.03 +/- 0.07 mag. Our distance is an improvement over previous results as we use a well-calibrated, stable distance indicator, precision photometry in a optimally selected field of view, and a Bayesian Maximum Likelihood technique that reduces measurement uncertainties. The most discrepant previous results are due to Tully-Fisher method distances, which are likely inappropriate for M104 given its peculiar morphology and structure. Our results are part of a larger program to measu...
Max–min distance nonnegative matrix factorization
Wang, Jim Jing-Yan
2014-10-26
Nonnegative Matrix Factorization (NMF) has been a popular representation method for pattern classification problems. It tries to decompose a nonnegative matrix of data samples as the product of a nonnegative basis matrix and a nonnegative coefficient matrix. The columns of the coefficient matrix can be used as new representations of these data samples. However, traditional NMF methods ignore class labels of the data samples. In this paper, we propose a novel supervised NMF algorithm to improve the discriminative ability of the new representation by using the class labels. Using the class labels, we separate all the data sample pairs into within-class pairs and between-class pairs. To improve the discriminative ability of the new NMF representations, we propose to minimize the maximum distance of the within-class pairs in the new NMF space, and meanwhile to maximize the minimum distance of the between-class pairs. With this criterion, we construct an objective function and optimize it with regard to basis and coefficient matrices, and slack variables alternatively, resulting in an iterative algorithm. The proposed algorithm is evaluated on three pattern classification problems and experiment results show that it outperforms the state-of-the-art supervised NMF methods.
Maximum likely scale estimation
Loog, Marco; Pedersen, Kim Steenstrup; Markussen, Bo
2005-01-01
A maximum likelihood local scale estimation principle is presented. An actual implementation of the estimation principle uses second order moments of multiple measurements at a fixed location in the image. These measurements consist of Gaussian derivatives possibly taken at several scales and/or ...
Al-Atiyat, R M; Aljumaah, R S
2014-01-01
This study aimed to estimate evolutionary distances and to reconstruct phylogeny trees between different Awassi sheep populations. Thirty-two sheep individuals from three different geographical areas of Jordan and the Kingdom of Saudi Arabia (KSA) were randomly sampled. DNA was extracted from the tissue samples and sequenced using the T7 promoter universal primer. Different phylogenetic trees were reconstructed from 0.64-kb DNA sequences using the MEGA software with the best general time reverse distance model. Three methods of distance estimation were then used. The maximum composite likelihood test was considered for reconstructing maximum likelihood, neighbor-joining and UPGMA trees. The maximum likelihood tree indicated three major clusters separated by cytosine (C) and thymine (T). The greatest distance was shown between the South sheep and North sheep. On the other hand, the KSA sheep as an outgroup showed shorter evolutionary distance to the North sheep population than to the others. The neighbor-joining and UPGMA trees showed quite reliable clusters of evolutionary differentiation of Jordan sheep populations from the Saudi population. The overall results support geographical information and ecological types of the sheep populations studied. Summing up, the resulting phylogeny trees may contribute to the limited information about the genetic relatedness and phylogeny of Awassi sheep in nearby Arab countries.
Duality of Maximum Entropy and Minimum Divergence
Shinto Eguchi
2014-06-01
Full Text Available We discuss a special class of generalized divergence measures by the use of generator functions. Any divergence measure in the class is separated into the difference between cross and diagonal entropy. The diagonal entropy measure in the class associates with a model of maximum entropy distributions; the divergence measure leads to statistical estimation via minimization, for arbitrarily giving a statistical model. The dualistic relationship between the maximum entropy model and the minimum divergence estimation is explored in the framework of information geometry. The model of maximum entropy distributions is characterized to be totally geodesic with respect to the linear connection associated with the divergence. A natural extension for the classical theory for the maximum likelihood method under the maximum entropy model in terms of the Boltzmann-Gibbs-Shannon entropy is given. We discuss the duality in detail for Tsallis entropy as a typical example.
Maximum information photoelectron metrology
Hockett, P; Wollenhaupt, M; Baumert, T
2015-01-01
Photoelectron interferograms, manifested in photoelectron angular distributions (PADs), are a high-information, coherent observable. In order to obtain the maximum information from angle-resolved photoionization experiments it is desirable to record the full, 3D, photoelectron momentum distribution. Here we apply tomographic reconstruction techniques to obtain such 3D distributions from multiphoton ionization of potassium atoms, and fully analyse the energy and angular content of the 3D data. The PADs obtained as a function of energy indicate good agreement with previous 2D data and detailed analysis [Hockett et. al., Phys. Rev. Lett. 112, 223001 (2014)] over the main spectral features, but also indicate unexpected symmetry-breaking in certain regions of momentum space, thus revealing additional continuum interferences which cannot otherwise be observed. These observations reflect the presence of additional ionization pathways and, most generally, illustrate the power of maximum information measurements of th...
The Wiener maximum quadratic assignment problem
Cela, Eranda; Woeginger, Gerhard J
2011-01-01
We investigate a special case of the maximum quadratic assignment problem where one matrix is a product matrix and the other matrix is the distance matrix of a one-dimensional point set. We show that this special case, which we call the Wiener maximum quadratic assignment problem, is NP-hard in the ordinary sense and solvable in pseudo-polynomial time. Our approach also yields a polynomial time solution for the following problem from chemical graph theory: Find a tree that maximizes the Wiener index among all trees with a prescribed degree sequence. This settles an open problem from the literature.
On the maximum sufficient range of interstellar vessels
Cartin, Daniel
2011-01-01
This paper considers the likely maximum range of space vessels providing the basis of a mature interstellar transportation network. Using the principle of sufficiency, it is argued that this range will be less than three parsecs for the average interstellar vessel. This maximum range provides access from the Solar System to a large majority of nearby stellar systems, with total travel distances within the network not excessively greater than actual physical distance.
Bodlaender, H.L.; Koster, A.M.C.A.
2003-01-01
A set of vertices S Í V is called a safe separator for treewidth, if S is a separator of G, and the treewidth of G equals the maximum of the treewidth over all connected components W of G - S of the graph, obtained by making S a clique in the subgraph of G, induced by W È S. We show that such safe s
Challenges Encountered by a Distance Learning Organisation
Malik, Sangeeta
2012-01-01
Distance learning as the name indicates is a learning, learner gets from distant places. In this learning system, learner and educators are separated by space & time. Lots of distance learning organizations are spreading to meet the increased demand of current & future needs of adult education. The rapid spread of these organizations doesn't mean…
Maximum Likelihood Associative Memories
Gripon, Vincent; Rabbat, Michael
2013-01-01
Associative memories are structures that store data in such a way that it can later be retrieved given only a part of its content -- a sort-of error/erasure-resilience property. They are used in applications ranging from caches and memory management in CPUs to database engines. In this work we study associative memories built on the maximum likelihood principle. We derive minimum residual error rates when the data stored comes from a uniform binary source. Second, we determine the minimum amo...
Maximum likely scale estimation
Loog, Marco; Pedersen, Kim Steenstrup; Markussen, Bo
2005-01-01
A maximum likelihood local scale estimation principle is presented. An actual implementation of the estimation principle uses second order moments of multiple measurements at a fixed location in the image. These measurements consist of Gaussian derivatives possibly taken at several scales and....../or having different derivative orders. Although the principle is applicable to a wide variety of image models, the main focus here is on the Brownian model and its use for scale selection in natural images. Furthermore, in the examples provided, the simplifying assumption is made that the behavior...... of the measurements is completely characterized by all moments up to second order....
Favourite distances in high dimensions
Swanepoel, Konrad J
2011-01-01
Let $S$ be a set of $n$ points in $d$-dimensional Euclidean space. Assign to each $x\\in S$ an arbitrary distance $r(x)>0$. Let $e_r(x,S)$ denote the number of points in $S$ at distance $r(x)$ from $x$. Avis, Erd\\"os and Pach (1988) introduced the extremal quantity $f_d(n)=\\max\\sum_{x\\in S}e_r(x,S)$, where the maximum is taken over all $n$-point sets $S$ in $d$-dimensional space and all assignments $r\\colon S\\to(0,\\infty)$ of distances. We give a quick derivation of the asymptotics of the error term of $f_d(n)$ using only the analogous asymptotics of the maximum number of unit distance pairs in a set of $n$ points, which improves on previous results of Avis, Erd\\"os and Pach (1988) and Erd\\"os and Pach (1990). Then we prove a stability result for $d\\geq 4$, asserting that if $(S,r)$ with $|S|=n$ satisfies $e_r(S)=f_d(n)-o(n^2)$, then, up to $o(n)$ points, $S$ is a Lenz construction with $r$ constant. Finally we use stability to show that for $n$ sufficiently large (depending on $d$) the pairs $(S,r)$ that atta...
Deza, Michel Marie
2016-01-01
This 4th edition of the leading reference volume on distance metrics is characterized by updated and rewritten sections on some items suggested by experts and readers, as well a general streamlining of content and the addition of essential new topics. Though the structure remains unchanged, the new edition also explores recent advances in the use of distances and metrics for e.g. generalized distances, probability theory, graph theory, coding theory, data analysis. New topics in the purely mathematical sections include e.g. the Vitanyi multiset-metric, algebraic point-conic distance, triangular ratio metric, Rossi-Hamming metric, Taneja distance, spectral semimetric between graphs, channel metrization, and Maryland bridge distance. The multidisciplinary sections have also been supplemented with new topics, including: dynamic time wrapping distance, memory distance, allometry, atmospheric depth, elliptic orbit distance, VLBI distance measurements, the astronomical system of units, and walkability distance. Lea...
陈勇; 李素贞; 李光武; 陈向琼
2013-01-01
Objective To estimate the clinical effect of insertion-type separate porcelain-fused-to-metal inlay crown on molar residual roots and crowns with low occlusogingival distance. Methods Thirty molar residual roots and crowns with low occlusogingival distance (<5 mm) were restored with insertion-type separate porcelain-fused-to-metal inlay crown, which is consist of the porcelain-fused-to-metal inlay crown and cast anatomy inser post. Results During the follow-up of 6~28 months, none of prostheses was loose and fractured. All the prostheses were found with good marginal fitness and well masticatory fuction without sign of gingivitis. Conclusion The insertion-type separate porcelain-fused-to-metal inlay crown is a effective method for restoring molar residual roots and crowns with low occlusogingival distance.%目的 评价插销式金瓷嵌体冠修复低(猞)龈距短冠磨牙的效果.方法 应用金瓷嵌体冠和插销桩一体的插销式金瓷嵌体冠对13例短冠磨牙进行修复.结果 经过6～28个月观察,1 3例插销式金瓷嵌体冠固位良好,均无松动脱落,边缘密合,咀嚼功能良好,无牙龈炎症.结论 插销式金瓷嵌体冠可用于短冠磨牙的修复
F. TopsÃƒÂ¸e
2001-09-01
Full Text Available Abstract: In its modern formulation, the Maximum Entropy Principle was promoted by E.T. Jaynes, starting in the mid-fifties. The principle dictates that one should look for a distribution, consistent with available information, which maximizes the entropy. However, this principle focuses only on distributions and it appears advantageous to bring information theoretical thinking more prominently into play by also focusing on the "observer" and on coding. This view was brought forward by the second named author in the late seventies and is the view we will follow-up on here. It leads to the consideration of a certain game, the Code Length Game and, via standard game theoretical thinking, to a principle of Game Theoretical Equilibrium. This principle is more basic than the Maximum Entropy Principle in the sense that the search for one type of optimal strategies in the Code Length Game translates directly into the search for distributions with maximum entropy. In the present paper we offer a self-contained and comprehensive treatment of fundamentals of both principles mentioned, based on a study of the Code Length Game. Though new concepts and results are presented, the reading should be instructional and accessible to a rather wide audience, at least if certain mathematical details are left aside at a rst reading. The most frequently studied instance of entropy maximization pertains to the Mean Energy Model which involves a moment constraint related to a given function, here taken to represent "energy". This type of application is very well known from the literature with hundreds of applications pertaining to several different elds and will also here serve as important illustration of the theory. But our approach reaches further, especially regarding the study of continuity properties of the entropy function, and this leads to new results which allow a discussion of models with so-called entropy loss. These results have tempted us to speculate over
Regularized maximum correntropy machine
Wang, Jim Jing-Yan
2015-02-12
In this paper we investigate the usage of regularized correntropy framework for learning of classifiers from noisy labels. The class label predictors learned by minimizing transitional loss functions are sensitive to the noisy and outlying labels of training samples, because the transitional loss functions are equally applied to all the samples. To solve this problem, we propose to learn the class label predictors by maximizing the correntropy between the predicted labels and the true labels of the training samples, under the regularized Maximum Correntropy Criteria (MCC) framework. Moreover, we regularize the predictor parameter to control the complexity of the predictor. The learning problem is formulated by an objective function considering the parameter regularization and MCC simultaneously. By optimizing the objective function alternately, we develop a novel predictor learning algorithm. The experiments on two challenging pattern classification tasks show that it significantly outperforms the machines with transitional loss functions.
Ghost imaging with broad distance
段德洋; 张路; 杜少将; 夏云杰
2015-01-01
We present a scheme that is able to achieve the ghost imaging with broad distance. The physical nature of our scheme is that the different wavelength beams are separated in free space by an optical media according to the slow light or dispersion principle. Meanwhile, the equality of the optical distance of the two light arms is not violated. The photon correlation is achieved by the rotating ground glass plate (RGGP) and spatial light modulator (SLM), respectively. Our work shows that a monochromic ghost image can be obtained in the case of RGGP. More importantly, the position (or distance) of the object can be ascertained by the color of the image. Thus, the imaging and ranging processes are combined as one process for the first time to the best of our knowledge. In the case of SLM, we can obtain a colored image regardless of where the object is.
SEXUAL DIMORPHISM OF MAXIMUM FEMORAL LENGTH
Pandya A M
2011-04-01
Full Text Available Sexual identification from the skeletal parts has medico legal and anthropological importance. Present study aims to obtain values of maximum femoral length and to evaluate its possible usefulness in determining correct sexual identification. Study sample consisted of 184 dry, normal, adult, human femora (136 male & 48 female from skeletal collections of Anatomy department, M. P. Shah Medical College, Jamnagar, Gujarat. Maximum length of femur was considered as maximum vertical distance between upper end of head of femur and the lowest point on femoral condyle, measured with the osteometric board. Mean Values obtained were, 451.81 and 417.48 for right male and female, and 453.35 and 420.44 for left male and female respectively. Higher value in male was statistically highly significant (P< 0.001 on both sides. Demarking point (D.P. analysis of the data showed that right femora with maximum length more than 476.70 were definitely male and less than 379.99 were definitely female; while for left bones, femora with maximum length more than 484.49 were definitely male and less than 385.73 were definitely female. Maximum length identified 13.43% of right male femora, 4.35% of right female femora, 7.25% of left male femora and 8% of left female femora. [National J of Med Res 2011; 1(2.000: 67-70
Indira Gandhi National Open University, New Delhi (India). Distance Education Council.
Since its inception in India in 1962, distance education has grown in popularity. The Distance Education Council (DEC) directs distance learning within India's higher education system. The DEC's promotion, coordination, and maintenance of standards for distance education are its three major roles. Its initiatives include grants, support for…
Training for Distance Teaching through Distance Learning.
Cadorath, Jill; Harris, Simon; Encinas, Fatima
2002-01-01
Describes a mixed-mode bachelor degree course in English language teaching at the Universidad Autonoma de Puebla (Mexico) that was designed to help practicing teachers write appropriate distance education materials by giving them the experience of being distance students. Includes a course outline and results of a course evaluation. (Author/LRW)
Sublinear distance labeling for sparse graphs
Alstrup, Stephen; Dahlgaard, Søren; Knudsen, Mathias Bæk Tejs;
2015-01-01
between pairs of nodes that are at distance at least $D$ from each other. In this paper we consider distance labeling schemes for the classical case of unweighted and undirected graphs. We present the first distance labeling scheme of size $o(n)$ for sparse graphs (and hence bounded degree graphs......). This addresses an open problem by Gavoille et. al. [J. Algo. 2004], hereby separating the complexity from general graphs which require $\\Omega(n)$ size Moon [Proc. of Glasgow Math. Association 1965]. As an intermediate result we give a $O(\\frac{n}{D}\\log^2 D)$ $D$-preserving distance labeling scheme, improving...
Sadjadi, Firooz A; Mahalanobis, Abhijit
2006-05-01
We report the development of a technique for adaptive selection of polarization ellipse tilt and ellipticity angles such that the target separation from clutter is maximized. From the radar scattering matrix [S] and its complex components, in phase and quadrature phase, the elements of the Mueller matrix are obtained. Then, by means of polarization synthesis, the radar cross section of the radar scatters are obtained at different transmitting and receiving polarization states. By designing a maximum average correlation height filter, we derive a target versus clutter distance measure as a function of four transmit and receive polarization state angles. The results of applying this method on real synthetic aperture radar imagery indicate a set of four transmit and receive angles that lead to maximum target versus clutter discrimination. These optimum angles are different for different targets. Hence, by adaptive control of the state of polarization of polarimetric radar, one can noticeably improve the discrimination of targets from clutter.
Equalized near maximum likelihood detector
2012-01-01
This paper presents new detector that is used to mitigate intersymbol interference introduced by bandlimited channels. This detector is named equalized near maximum likelihood detector which combines nonlinear equalizer and near maximum likelihood detector. Simulation results show that the performance of equalized near maximum likelihood detector is better than the performance of nonlinear equalizer but worse than near maximum likelihood detector.
Cheeseman, Peter; Stutz, John
2005-01-01
A long standing mystery in using Maximum Entropy (MaxEnt) is how to deal with constraints whose values are uncertain. This situation arises when constraint values are estimated from data, because of finite sample sizes. One approach to this problem, advocated by E.T. Jaynes [1], is to ignore this uncertainty, and treat the empirically observed values as exact. We refer to this as the classic MaxEnt approach. Classic MaxEnt gives point probabilities (subject to the given constraints), rather than probability densities. We develop an alternative approach that assumes that the uncertain constraint values are represented by a probability density {e.g: a Gaussian), and this uncertainty yields a MaxEnt posterior probability density. That is, the classic MaxEnt point probabilities are regarded as a multidimensional function of the given constraint values, and uncertainty on these values is transmitted through the MaxEnt function to give uncertainty over the MaXEnt probabilities. We illustrate this approach by explicitly calculating the generalized MaxEnt density for a simple but common case, then show how this can be extended numerically to the general case. This paper expands the generalized MaxEnt concept introduced in a previous paper [3].
Deza, Michel Marie
2014-01-01
This updated and revised third edition of the leading reference volume on distance metrics includes new items from very active research areas in the use of distances and metrics such as geometry, graph theory, probability theory and analysis. Among the new topics included are, for example, polyhedral metric space, nearness matrix problems, distances between belief assignments, distance-related animal settings, diamond-cutting distances, natural units of length, Heidegger’s de-severance distance, and brain distances. The publication of this volume coincides with intensifying research efforts into metric spaces and especially distance design for applications. Accurate metrics have become a crucial goal in computational biology, image analysis, speech recognition and information retrieval. Leaving aside the practical questions that arise during the selection of a ‘good’ distance function, this work focuses on providing the research community with an invaluable comprehensive listing of the main available di...
Relocation impacts of an H-Separations coil and tube failure
Blanchard, A.
2000-03-06
The relocation impacts of an accidental release, scenario 1-RD-2.35, are evaluated for H-Separations. The extent of the area potentially contaminated to a level that would result in doses exceeding the relocation protective action guide (PAG) is calculated. The maximum calculated distance downwind from the accident at which the relocation PAG is exceeded is also determined. The consequences of the release are evaluated using the HOTSPOT model and an EXCEL spreadsheet.
Ding, Ping; Wunnicke, Dorith; Steinhoff, Heinz-Jürgen; Seela, Frank
2010-12-27
Nucleobase-directed spin-labeling by the azide-alkyne 'click' (CuAAC) reaction has been performed for the first time with oligonucleotides. 7-Deaza-7-ethynyl-2'-deoxyadenosine (1) and 5-ethynyl-2'-deoxyuridine (2) were chosen to incorporate terminal triple bonds into DNA. Oligonucleotides containing 1 or 2 were synthesized on a solid phase and spin labeling with 4-azido-2,2,6,6-tetramethylpiperidine 1-oxyl (4-azido-TEMPO, 3) was performed by post-modification in solution. Two spin labels (3) were incorporated with high efficiency into the DNA duplex at spatially separated positions or into a 'dA-dT' base pair. Modification at the 5-position of the pyrimidine base or at the 7-position of the 7-deazapurine residue gave steric freedom to the spin label in the major groove of duplex DNA. By applying cw and pulse EPR spectroscopy, very accurate distances between spin labels, within the range of 1-2 nm, were measured. The spin-spin distance was 1.8±0.2 nm for DNA duplex 17(dA*(7,10))⋅11 containing two spin labels that are separated by two nucleotides within one individual strand. A distance of 1.4±0.2 nm was found for the spin-labeled 'dA-dT' base pair 15(dA*(7))⋅16(dT*(6)). The 'click' approach has the potential to be applied to all four constituents of DNA, which indicates the universal applicability of the method. New insights into the structural changes of canonical or modified DNA are expected to provide additional information on novel DNA structures, protein interaction, DNA architecture, and synthetic biology.
Distances from Planetary Nebulae
Ciardullo, R
2003-01-01
The [O III] 5007 planetary nebula luminosity function (PNLF) occupies an important place on the extragalactic distance ladder. Since it is the only method that is applicable to all the large galaxies of the Local Supercluster, it is uniquely useful for cross-checking results and linking the Population I and Population II distance scales. We review the physics underlying the method, demonstrate its precision, and illustrate its value by comparing its distances to distances obtained from Cepheids and the Surface Brightness Fluctuation (SBF) method. We use the Cepheid and PNLF distances to 13 galaxies to show that the metallicity dependence of the PNLF cutoff is in excellent agreement with that predicted from theory, and that no additional systematic corrections are needed for either method. However, when we compare the Cepheid-calibrated PNLF distance scale with the Cepheid-calibrated SBF distance scale, we find a significant offset: although the relative distances of both methods are in excellent agreement, th...
Reynolds, John C.
2002-01-01
expressions) for accessing and modifying shared structures, and for explicit allocation and deallocation of storage. Assertions are extended by introducing a "separating conjunction" that asserts that its sub-formulas hold for disjoint parts of the heap, and a closely related "separating implication". Coupled......, dynamically allocated arrays, and recursive procedures. We will also discuss promising future directions....
A generalized evidence distance
Hongming Mo; Xi Lu; Yong Deng
2016-01-01
How to efficiently measure the distance between two basic probability assignments (BPAs) is an open issue. In this paper, a new method to measure the distance between two BPAs is proposed, based on two existing measures of evidence distance. The new proposed method is comprehen-sive and generalized. Numerical examples are used to ilus-trate the effectiveness of the proposed method.
Fluid stiction modeling for quickly separating plates considering the liquid tensile strength
Roemer, Daniel Beck; Johansen, Per; Pedersen, Henrik C.;
2015-01-01
separation speed and low plate distance are present. In the case of small initial plate separation, fluid tension is known to develop and the stiction force may exceed the maximum stiction force calculated by assuming strictly positive pressures in the fluid film. In this paper, a model for simulating......Fluid stiction may significantly influence the dynamic behavior when attempting to quickly separate two plates in close contact. The liquid fluid film, filling the gap between the plates, experiences a pressure drop resulting from an increasing distance, and cavitation may appear if sufficient...... the need for finite element/volume methods. The considered geometry is two long parallel plates submerged in liquid, as present in many valve applications. The model is compared to experimental measurements, and it is found that the model is able to predict the stiction effect with reasonable accuracy...
Learning Isometric Separation Maps
Vasiloglou, Nikolaos; Anderson, David V
2008-01-01
Maximum Variance Unfolding (MVU) and its variants have been very successful in embedding data-manifolds in lower dimensionality spaces, often revealing the true intrinsic dimensions. In this paper we show how to also incorporate supervised class information into an MVU-like method without breaking its convexity. We call this method the Isometric Separation Map and we show that the resulting kernel matrix can be used for a binary/multiclass Support Vector Machine in a semi-supervised (transductive) framework. We also show that the method always finds a kernel matrix that linearly separates the training data exactly without projecting them in infinite dimensional spaces.
Importance of Developing Community in Distance Education Courses
Moore, Robert L.
2014-01-01
The separation of student and instructor is the core characteristic of distance education (Simonson et al., 2012, p. 28), contributing to one of the biggest challenges to distance education-attrition (Dueber & Misanchuk, 2001, p. 2). By the very nature of distance education, students are different locations from one another and their…
Larsen, Gunvor Riber
The environmental impact of tourism mobility is linked to the distances travelled in order to reach a holiday destination, and with tourists travelling more and further than previously, an understanding of how the tourists view the distance they travel across becomes relevant. Based on interviews...... contribute to an understanding of how it is possible to change tourism travel behaviour towards becoming more sustainable. How tourists 'consume distance' is discussed, from the practical level of actually driving the car or sitting in the air plane, to the symbolic consumption of distance that occurs when...... travelling on holiday becomes part of a lifestyle and a social positioning game. Further, different types of tourist distance consumers are identified, ranging from the reluctant to the deliberate and nonchalant distance consumers, who display very differing attitudes towards the distance they all travel...
Ristad, E S; Ristad, Eric Sven; Yianilos, Peter N.
1996-01-01
In many applications, it is necessary to determine the similarity of two strings. A widely-used notion of string similarity is the edit distance: the minimum number of insertions, deletions, and substitutions required to transform one string into the other. In this report, we provide a stochastic model for string edit distance. Our stochastic model allows us to learn a string edit distance function from a corpus of examples. We illustrate the utility of our approach by applying it to the difficult problem of learning the pronunciation of words in conversational speech. In this application, we learn a string edit distance with one fourth the error rate of the untrained Levenshtein distance. Our approach is applicable to any string classification problem that may be solved using a similarity function against a database of labeled prototypes. Keywords: string edit distance, Levenshtein distance, stochastic transduction, syntactic pattern recognition, prototype dictionary, spelling correction, string correction, ...
Interface Simulation Distances
Pavol Černý
2012-10-01
Full Text Available The classical (boolean notion of refinement for behavioral interfaces of system components is the alternating refinement preorder. In this paper, we define a distance for interfaces, called interface simulation distance. It makes the alternating refinement preorder quantitative by, intuitively, tolerating errors (while counting them in the alternating simulation game. We show that the interface simulation distance satisfies the triangle inequality, that the distance between two interfaces does not increase under parallel composition with a third interface, and that the distance between two interfaces can be bounded from above and below by distances between abstractions of the two interfaces. We illustrate the framework, and the properties of the distances under composition of interfaces, with two case studies.
Perspectives on Group Work In Distance Learning
Hausstätter, Rune Sarromaa; NORDKVELLE, Yngve Troye
2015-01-01
Current distance education benefits greatly from educational software that makes group work possible for students who are separated in time and space. However, some students prefer distance education because they can work on their own. This paper explores how students react to expectations on behalf of the course provider to do their assignments in collaborative groups. They are seemingly both positively surprised by the challenges that group work offer, and they are less positive to the down...
Glen Gatin
2013-06-01
Full Text Available This analysis began with inquiries into the substantive area of distance education using the classic grounded theory method. Analysis revealed a pattern of problemsolving behavior, from which the theory Keeping Your Distance emerged. The theory is an integrated set of concepts referring to the conscious and unconscious strategiesthat people use to regulate distance, physical and representative, in their everyday lives. Strategies are used to control physical, emotional, and psychological realities and to conserve personal energy in interactions with individuals and/or institutions.For all social interactions, people use a personalized algorithm of engagement that mitigates conditions and consequences and preserves optimal distance. Keeping Your Distance provides a theoretical starting point for considerations of the changing notions of distance. In part, these changes have been brought about bydevelopments in the fields of Information and Communication Technology (ICT and online social networking.
Ziegler, Gerhard
2011-01-01
Distance protection provides the basis for network protection in transmission systems and meshed distribution systems. This book covers the fundamentals of distance protection and the special features of numerical technology. The emphasis is placed on the application of numerical distance relays in distribution and transmission systems.This book is aimed at students and engineers who wish to familiarise themselves with the subject of power system protection, as well as the experienced user, entering the area of numerical distance protection. Furthermore it serves as a reference guide for s
Realistic Safe-Separation Distance Determination for Mass Fire Hazards
2013-03-25
amidships tossed the upper decks back, curled and flattened like a banana peel as indicated in Figure 5. Sections of the Liberte were hurled outward...clad frame and sheet metal roof. For the preceding six weeks the temperature in this area of Finland had been relatively high with 30°C being...flaming debris set sheets of cellulose nitrate on fire, feeding an even greater conflagration. Six hours after the explosion, flames were still burning
Normalized information distance
Vitányi, P.M.B.; Balbach, F.J.; Cilibrasi, R.L.; Li, M.; Emmert-Streib, F.; Dehmer, M.
2009-01-01
The normalized information distance is a universal distance measure for objects of all kinds. It is based on Kolmogorov complexity and thus uncomputable, but there are ways to utilize it. First, compression algorithms can be used to approximate the Kolmogorov complexity if the objects have a string
Normalized information distance
Vitányi, P.M.B.; Balbach, F.J.; Cilibrasi, R.L.; Li, M.
2008-01-01
The normalized information distance is a universal distance measure for objects of all kinds. It is based on Kolmogorov complexity and thus uncomputable, but there are ways to utilize it. First, compression algorithms can be used to approximate the Kolmogorov complexity if the objects have a string
Incremental Distance Transforms (IDT)
Schouten, Theo E.; van den Broek, Egon; Erçil, A.; Çetin, M.; Boyer, K.; Lee, S.-W.
2010-01-01
A new generic scheme for incremental implementations of distance transforms (DT) is presented: Incremental Distance Transforms (IDT). This scheme is applied on the cityblock, Chamfer, and three recent exact Euclidean DT (E2DT). A benchmark shows that for all five DT, the incremental implementation r
ORDERED WEIGHTED DISTANCE MEASURE
Zeshui XU; Jian CHEN
2008-01-01
The aim of this paper is to develop an ordered weighted distance (OWD) measure, which is thegeneralization of some widely used distance measures, including the normalized Hamming distance, the normalized Euclidean distance, the normalized geometric distance, the max distance, the median distance and the min distance, etc. Moreover, the ordered weighted averaging operator, the generalized ordered weighted aggregation operator, the ordered weighted geometric operator, the averaging operator, the geometric mean operator, the ordered weighted square root operator, the square root operator, the max operator, the median operator and the min operator axe also the special cases of the OWD measure. Some methods depending on the input arguments are given to determine the weights associated with the OWD measure. The prominent characteristic of the OWD measure is that it can relieve (or intensify) the influence of unduly large or unduly small deviations on the aggregation results by assigning them low (or high) weights. This desirable characteristic makes the OWD measure very suitable to be used in many actual fields, including group decision making, medical diagnosis, data mining, and pattern recognition, etc. Finally, based on the OWD measure, we develop a group decision making approach, and illustrate it with a numerical example.
C. Binder (C.); C. Heilmann (Conrad)
2017-01-01
markdownabstractEver since the publication of Peter Singer’s article ‘‘Famine, Affluence, and Morality’’ has the question of whether the (geographical) distance to people in need affects our moral duties towards them been a hotly debated issue. Does geographical distance affect our moral duties?
Biomechanics of Distance Running.
Cavanagh, Peter R., Ed.
Contributions from researchers in the field of running mechanics are included in the 13 chapters of this book. The following topics are covered: (1) "The Mechanics of Distance Running: A Historical Perspective" (Peter Cavanagh); (2) "Stride Length in Distance Running: Velocity, Body Dimensions, and Added Mass Effects" (Peter Cavanagh, Rodger…
Distance Learning Environment Demonstration.
1996-11-01
The Distance Learning Environment Demonstration (DLED) was a comparative study of distributed multimedia computer-based training using low cost high...measurement. The DLED project provides baseline research in the effective use of distance learning and multimedia communications over a wide area ATM/SONET
C. Binder (C.); C. Heilmann (Conrad)
2017-01-01
markdownabstractEver since the publication of Peter Singer’s article ‘‘Famine, Affluence, and Morality’’ has the question of whether the (geographical) distance to people in need affects our moral duties towards them been a hotly debated issue. Does geographical distance affect our moral
Hyperbolic waveguide for long-distance transport of near-field heat flux
Messina, Riccardo; Ben-Abdallah, Philippe; Guizal, Brahim; Antezza, Mauro; Biehs, Svend-Age
2016-09-01
Heat flux exchanged between two hot bodies at subwavelength separation distances can exceed the limit predicted by the blackbody theory. However, this super-Planckian transfer is restricted to these separation distances. Here we demonstrate the possible existence of a super-Planckian transfer at arbitrary large separation distances if the interacting bodies are connected in the near field with weakly dissipating hyperbolic waveguides. This result opens the way to long-distance transport of near-field thermal energy.
Estimating distances from parallaxes
Astraatmadja, Tri L.; Bailer-Jones, Coryn
2017-01-01
In astrometric surveys such as Gaia and LSST, parallaxes will be measured for about a billion stars, but zero distances will be measured. Distances must be inferred from the parallaxes, and the common inference practice is by inverting the parallax. This, however, is only appropriate when there is no noise present. As noise will always be present and most stars in future surveys will have non-negligible fractional parallax uncertainties, we must treat distance estimation as an inference problem. The usage of prior assumptions become unavoidable. In this talk I will present a method on how to infer distances using Bayesian inference. Three minimalists, isotropic priors are used, as well an anisotropic prior derived from the observability of stars in a Milky Way model. The performance of these priors are investigated using a simulated Gaia-like catalogue. Recent results of distance estimation using the parallaxes of 2 million Gaia DR1 stars will also be discussed.
Normalized Information Distance
Vitanyi, Paul M B; Cilibrasi, Rudi L; Li, Ming
2008-01-01
The normalized information distance is a universal distance measure for objects of all kinds. It is based on Kolmogorov complexity and thus uncomputable, but there are ways to utilize it. First, compression algorithms can be used to approximate the Kolmogorov complexity if the objects have a string representation. Second, for names and abstract concepts, page count statistics from the World Wide Web can be used. These practical realizations of the normalized information distance can then be applied to machine learning tasks, expecially clustering, to perform feature-free and parameter-free data mining. This chapter discusses the theoretical foundations of the normalized information distance and both practical realizations. It presents numerous examples of successful real-world applications based on these distance measures, ranging from bioinformatics to music clustering to machine translation.
Isolation by language and distance in Belgium.
Barrai, I; Rodriguez-Larralde, A; Manni, F; Ruggiero, V; Tartari, D; Scapoli, C
2004-01-01
The isonymy structure of trilingual Belgium was studied using the surname distributions for 1,118,004 private telephone users. The users were distributed in 77 Flemish, 76 French, and 3 German speaking towns, selected on a geographic basis to form an approximately regular grid over Belgium. Lasker's distance was found to be considerably higher between languages than within languages. For the whole of Belgium, irrespective of language, it was highly correlated with linear geographic distance, with r = 0.721+/-0.014, which is the highest correlation observed in European countries to date. Within Belgium and within languages, the correlation was highest among the Flemish (r = 0.878 +/- 0.007), and lowest among the French (r = 0.631+/-0.020). Isolation by distance in Belgium is the highest we have found in Europe, and as high as in Switzerland where the different languages are separated by geographical barriers. This is not the case in Belgium, so that the considerable isolating power of languages emerges clearly from the present analysis. From the comparison of Lasker's distance between (9.48) and within (8.16) languages, and from its regression over geographic distance (b = 0.01206), it was possible to establish a quantitative relationship between the isolating power of languages and that of geographic distance as (9.48-8.16)/0.01206 = 109 kilometres. This transformation of language distance into an equivalent geographic distance, given here for Belgium, can be applied to any similar geo-linguistic situation.
Institutional and specialized Distance learning program accreditation
Mehzabul Hoque Nahid
2015-09-01
Full Text Available Teaching and learning are no longer confined to the classroom or the school day. There are many technologies that can offer a great deal of flexibility in when, where, and how education is distributed. The Teacher's Guide to Distance Learning is intended for K-12 educators who are interested in implementing distance learning technologies. It provides an overview of the advantages and characteristics of the various technologies now being used to reach remote learners. Distance learning provides "access to learning when the source of information and the learners are separated by time and distance, or both." Distance education courses that require a physical on-site presence for any reason (excluding taking examinations may be referred to as hybrid or blended courses of study. Massive open online courses (MOOCs, aimed at large-scale interactive participation and open access via the web or other network technologies, are recent developments in distance education. A number of other terms are used roughly synonymously with distance education. However distance is the oldest and mostly commonly used term globally. It is also the broadest term and has the largest collection of related research articles. The main objective of this paper is develop an understanding of the characteristics and needs of distant students with little first-hand experience and limited, if any, face-to-face contact.
Probing the distance and morphology of the Large Magellanic Cloud with RR Lyrae stars
Klein, Christopher R; Miller, Adam A; Norman, Dara J; Bloom, Joshua S
2014-01-01
We present a Bayesian analysis of the distances to 15,040 Large Magellanic Cloud (LMC) RR Lyrae stars using $V$- and $I$-band light curves from the Optical Gravitational Lensing Experiment, in combination with new $z$-band observations from the Dark Energy Camera. Our median individual RR Lyrae distance statistical error is 1.89 kpc (fractional distance error of 3.76 per cent). We present three-dimensional contour plots of the number density of LMC RR Lyrae stars and measure a distance to the core LMC RR Lyrae centre of ${50.2482\\pm0.0546 {\\rm(statistical)} \\pm0.4628 {\\rm(systematic)} {\\rm kpc}}$, equivalently ${\\mu_{\\rm LMC}=18.5056\\pm0.0024 {\\rm(statistical)} \\pm0.02 {\\rm(systematic)}}$. This finding is statistically consistent with and four times more precise than the canonical value determined by a recent meta-analysis of 233 separate LMC distance determinations. We also measure a maximum tilt angle of $11.84^{\\circ}\\pm0.80^{\\circ}$ at a position angle of $62^\\circ$, and report highly precise constraints ...
Kernel-based Maximum Entropy Clustering
JIANG Wei; QU Jiao; LI Benxi
2007-01-01
With the development of Support Vector Machine (SVM),the "kernel method" has been studied in a general way.In this paper,we present a novel Kernel-based Maximum Entropy Clustering algorithm (KMEC).By using mercer kernel functions,the proposed algorithm is firstly map the data from their original space to high dimensional space where the data are expected to be more separable,then perform MEC clustering in the feature space.The experimental results show that the proposed method has better performance in the non-hyperspherical and complex data structure.
Dabelsteen, Hans B.
analysis, Dabelsteen study Danish secularism as an ideological concept. He finds that the conceptual structure of Danish secularism holds separation-as-principled distance at its core. Institutionally this particularly pertains to the establishment arrangement, and in practice it translates...... and proposes two conceptual expansions. The first is to include modest establishment in a framework of secularism defensible by political liberalism, and the second is to consider secularism in close connection to a theory of peoplehood. Methodologically positioned between interpretive realism and policy...... into the principle of treating everybody equally (with religious freedom, equality and Danish peoplehood as the most important principles adjacent to secularism). In a study of the historical roots of the separation doctrine and two current policy cases (same-sex marriage and reforms of church governance...
Distance, Bank Organizational Structure and Credit
Degryse, H.A.; Cerqueiro, G.M.; Ongena, S.
2007-01-01
We survey the extant literature on the effects of both a bank’s organizational structure and the physical distance separating it from the lender on lending decisions. Banks do engage in spatial pricing, where the underlying mechanism can be both transportation costs and information asymmetries. More
On the maximum backscattering cross section of passive linear arrays
Solymar, L.; Appel-Hansen, Jørgen
1974-01-01
The maximum backscattering cross section of an equispaced linear array connected to a reactive network and consisting of isotropic radiators is calculated forn = 2, 3, and 4 elements as a function of the incident angle and of the distance between the elements. On the basis of the results obtained...
2016-01-01
Footage of the 70 degree ISOLDE GPS separator magnet MAG70 as well as the switchyard for the Central Mass and GLM (GPS Low Mass) and GHM (GPS High Mass) beamlines in the GPS separator zone. In the GPS20 vacuum sector equipment such as the long GPS scanner 482 / 483 unit, faraday cup FC 490, vacuum valves and wiregrid piston WG210 and WG475 and radiation monitors can also be seen. Also the RILIS laser guidance and trajectory can be seen, the GPS main beamgate switch box and the actual GLM, GHM and Central Beamline beamgates in the beamlines as well as the first electrostatic quadrupoles for the GPS lines. Close up of the GHM deflector plates motor and connections and the inspection glass at the GHM side of the switchyard.
2016-01-01
Footage of the 90 and 60 degree ISOLDE HRS separator magnets in the HRS separator zone. In the two vacuum sectors HRS20 and HRS30 equipment such as the HRS slits SL240, the HRS faraday cup FC300 and wiregrid WG210 can be spotted. Vacuum valves, turbo pumps, beamlines, quadrupoles, water and compressed air connections, DC and signal cabling can be seen throughout the video. The HRS main and user beamgate in the beamline between MAG90 and MAG60 and its switchboxes as well as all vacuum bellows and flanges are shown. Instrumentation such as the HRS scanner unit 482 / 483, the HRS WG470 wiregrid and slits piston can be seen. The different quadrupoles and supports are shown as well as the RILIS guidance tubes and installation at the magnets and the different radiation monitors.
Estimating distances from parallaxes
Bailer-Jones, C A L
2015-01-01
Astrometric surveys such as Gaia and LSST will measure parallaxes for hundreds of millions of stars. Yet they will not measure a single distance. Rather, a distance must be estimated from a parallax. In this didactic article, I show that doing this is not trivial once the fractional parallax error is larger than about 20%, which will be the case for about 80% of stars in the Gaia catalogue. Estimating distances is an inference problem in which the use of prior assumptions is unavoidable. I investigate the properties and performance of various priors and examine their implications. A supposed uninformative uniform prior in distance is shown to give very poor distance estimates (large bias and variance). Any prior with a sharp cut-off at some distance has similar problems. The choice of prior depends on the information one has available - and is willing to use - concerning, for example, the survey and the Galaxy. I demonstrate that a simple prior which decreases asymptotically to zero at infinite distance has g...
MOTIVATION FOR DISTANCE EDUCATION
R zvan TEF NESCU
2009-10-01
Full Text Available Beginning with the 1980’s the new information, communication and computer based technologies stimulated the development of the distance education. In Romania the universities adapted rapidly to this type of learning that became an important financing source for most of them. In this article we approach the causes of attraction for the distance education. For this purpose we use an investigation we did on a group of students at Distance Education including interviews regarding their reasons for choosing this type of learning.
OECD Maximum Residue Limit Calculator
With the goal of harmonizing the calculation of maximum residue limits (MRLs) across the Organisation for Economic Cooperation and Development, the OECD has developed an MRL Calculator. View the calculator.
Learning Pullback HMM Distances.
Cuzzolin, Fabio; Sapienza, Michael
2014-07-01
Recent work in action recognition has exposed the limitations of methods which directly classify local features extracted from spatio-temporal video volumes. In opposition, encoding the actions' dynamics via generative dynamical models has a number of attractive features: however, using all-purpose distances for their classification does not necessarily deliver good results. We propose a general framework for learning distance functions for generative dynamical models, given a training set of labelled videos. The optimal distance function is selected among a family of pullback ones, induced by a parametrised automorphism of the space of models. We focus here on hidden Markov models and their model space, and design an appropriate automorphism there. Experimental results are presented which show how pullback learning greatly improves action recognition performances with respect to base distances.
Distance function selection in several clustering algorithrms
LU Yu
2004-01-01
Most clustering algorithms need to describe the similarity of objects by a predefined distance function. Three distance functions which are widely used in two traditional clustering algorithms k-means and hierarchical clustering were investigated.Both theoretical analysis and detailed experimental results were given. It is shown that a distance function greatly affects clustering results and can be used to detect the outlier of a cluster by the comparison of such different results and give the shape information of clusters. In practice situation, it is suggested to use different distance function separately, compare the clustering results and pick out the "swing points". And such points may leak out more information for data analysts.
A Distance Measure for Genome Phylogenetic Analysis
Cao, Minh Duc; Allison, Lloyd; Dix, Trevor
Phylogenetic analyses of species based on single genes or parts of the genomes are often inconsistent because of factors such as variable rates of evolution and horizontal gene transfer. The availability of more and more sequenced genomes allows phylogeny construction from complete genomes that is less sensitive to such inconsistency. For such long sequences, construction methods like maximum parsimony and maximum likelihood are often not possible due to their intensive computational requirement. Another class of tree construction methods, namely distance-based methods, require a measure of distances between any two genomes. Some measures such as evolutionary edit distance of gene order and gene content are computational expensive or do not perform well when the gene content of the organisms are similar. This study presents an information theoretic measure of genetic distances between genomes based on the biological compression algorithm expert model. We demonstrate that our distance measure can be applied to reconstruct the consensus phylogenetic tree of a number of Plasmodium parasites from their genomes, the statistical bias of which would mislead conventional analysis methods. Our approach is also used to successfully construct a plausible evolutionary tree for the γ-Proteobacteria group whose genomes are known to contain many horizontally transferred genes.
Nylon separators. [thermal degradation
Lim, H. S.
1977-01-01
A nylon separator was placed in a flooded condition in K0H solution and heated at various high temperatures ranging from 60 C to 110 C. The weight decrease was measured and the molecular weight and decomposition product were analyzed to determine: (1) the effect of K0H concentration on the hydrolysis rate; (2) the effect of K0H concentration on nylon degradation; (3) the activation energy at different K0H concentrations; and (4) the effect of oxygen on nylon degradation. The nylon hydrolysis rate is shown to increase as K0H concentration is decreased 34%, giving a maximum rate at about 16%. Separator hydrolysis is confirmed by molecular weight decrease in age of the batteries, and the reaction of nylon with molecular oxygen is probably negligible, compared to hydrolysis. The extrapolated rate value from the high temperature experiment correlates well with experimental values at 35 degrees.
Maximum life spiral bevel reduction design
Savage, M.; Prasanna, M. G.; Coe, H. H.
1992-07-01
Optimization is applied to the design of a spiral bevel gear reduction for maximum life at a given size. A modified feasible directions search algorithm permits a wide variety of inequality constraints and exact design requirements to be met with low sensitivity to initial values. Gear tooth bending strength and minimum contact ratio under load are included in the active constraints. The optimal design of the spiral bevel gear reduction includes the selection of bearing and shaft proportions in addition to gear mesh parameters. System life is maximized subject to a fixed back-cone distance of the spiral bevel gear set for a specified speed ratio, shaft angle, input torque, and power. Significant parameters in the design are: the spiral angle, the pressure angle, the numbers of teeth on the pinion and gear, and the location and size of the four support bearings. Interpolated polynomials expand the discrete bearing properties and proportions into continuous variables for gradient optimization. After finding the continuous optimum, a designer can analyze near optimal designs for comparison and selection. Design examples show the influence of the bearing lives on the gear parameters in the optimal configurations. For a fixed back-cone distance, optimal designs with larger shaft angles have larger service lives.
Haddouk, Lise
2015-01-01
Nowadays in the context of the cyberculture, computer-mediated inter-subjective relationships are part of our everyday lives, in both the professional and personal spheres, and for all age groups. In the clinical field, many applications have been developed to facilitate the exchange of informations and mediate the relationship between patient and therapist. In psychology, more or less immersive technologies are used, to encourage the feeling of presence among the users, and to trigger certain psychological processes. In our research, we have explored the remote clinical interview through videoconferencing, with the development and utilisation of the iPSY platform, totally focused on this objective. In this context, we have considered the notion of intersubjectivity, despite the physical absence. This research is leading us today to envision the notions of distance and presence, and possibly to redefine them. Thus, can we still oppose physical distance to psychological distance? Can we still affirm that the physical absence does not permit a psychological co-presence in certain interactions, like this observed in video interviews? The results show that the psychological processes, activated in this context, are similar to those observed in "traditional" clinical consults between the patient and the therapist. However, certain specifics have led us to consider the concept of distance, here influenced by the framework, and to observe its effects. This distance could possibly constitute a therapeutic lever for some patients, notably for those who have difficulties establishing the right psychological distance in their relationships with others. According to these results, can "distance" still be opposed to "presence", or could it be re-defined? This also opens up questions on the more general concept of digital relationships, and the definition of their specificities.
Maximum margin Bayesian network classifiers.
Pernkopf, Franz; Wohlmayr, Michael; Tschiatschek, Sebastian
2012-03-01
We present a maximum margin parameter learning algorithm for Bayesian network classifiers using a conjugate gradient (CG) method for optimization. In contrast to previous approaches, we maintain the normalization constraints on the parameters of the Bayesian network during optimization, i.e., the probabilistic interpretation of the model is not lost. This enables us to handle missing features in discriminatively optimized Bayesian networks. In experiments, we compare the classification performance of maximum margin parameter learning to conditional likelihood and maximum likelihood learning approaches. Discriminative parameter learning significantly outperforms generative maximum likelihood estimation for naive Bayes and tree augmented naive Bayes structures on all considered data sets. Furthermore, maximizing the margin dominates the conditional likelihood approach in terms of classification performance in most cases. We provide results for a recently proposed maximum margin optimization approach based on convex relaxation. While the classification results are highly similar, our CG-based optimization is computationally up to orders of magnitude faster. Margin-optimized Bayesian network classifiers achieve classification performance comparable to support vector machines (SVMs) using fewer parameters. Moreover, we show that unanticipated missing feature values during classification can be easily processed by discriminatively optimized Bayesian network classifiers, a case where discriminative classifiers usually require mechanisms to complete unknown feature values in the data first.
Maximum Entropy in Drug Discovery
Chih-Yuan Tseng
2014-07-01
Full Text Available Drug discovery applies multidisciplinary approaches either experimentally, computationally or both ways to identify lead compounds to treat various diseases. While conventional approaches have yielded many US Food and Drug Administration (FDA-approved drugs, researchers continue investigating and designing better approaches to increase the success rate in the discovery process. In this article, we provide an overview of the current strategies and point out where and how the method of maximum entropy has been introduced in this area. The maximum entropy principle has its root in thermodynamics, yet since Jaynes’ pioneering work in the 1950s, the maximum entropy principle has not only been used as a physics law, but also as a reasoning tool that allows us to process information in hand with the least bias. Its applicability in various disciplines has been abundantly demonstrated. We give several examples of applications of maximum entropy in different stages of drug discovery. Finally, we discuss a promising new direction in drug discovery that is likely to hinge on the ways of utilizing maximum entropy.
Distance learning for similarity estimation
Yu, J.; Amores, J.; Sebe, N.; Radeva, P.; Tian, Q.
2008-01-01
In this paper, we present a general guideline to find a better distance measure for similarity estimation based on statistical analysis of distribution models and distance functions. A new set of distance measures are derived from the harmonic distance, the geometric distance, and their generalized
Antirandom Testing: A Distance-Based Approach
Shen Hui Wu
2008-01-01
Full Text Available Random testing requires each test to be selected randomly regardless of the tests previously applied. This paper introduces the concept of antirandom testing where each test applied is chosen such that its total distance from all previous tests is maximum. This spans the test vector space to the maximum extent possible for a given number of vectors. An algorithm for generating antirandom tests is presented. Compared with traditional pseudorandom testing, antirandom testing is found to be very effective when a high-fault coverage needs to be achieved with a limited number of test vectors. The superiority of the new approach is even more significant for testing bridging faults.
Stereoscopic distance perception
Foley, John M.
1989-01-01
Limited cue, open-loop tasks in which a human observer indicates distances or relations among distances are discussed. By open-loop tasks, it is meant tasks in which the observer gets no feedback as to the accuracy of the responses. What happens when cues are added and when the loop is closed are considered. The implications of this research for the effectiveness of visual displays is discussed. Errors in visual distance tasks do not necessarily mean that the percept is in error. The error could arise in transformations that intervene between the percept and the response. It is argued that the percept is in error. It is also argued that there exist post-perceptual transformations that may contribute to the error or be modified by feedback to correct for the error.
PERSPECTIVES ON GROUP WORK IN DISTANCE LEARNING
Rune Sarromaa HAUSSTÄTTER
2007-01-01
Full Text Available Current distance education benefits greatly from educational software that makes group work possible for students who are separated in time and space. However, some students prefer distance education because they can work on their own. This paper explores how students react to expectations on behalf of the course provider to do their assignments in collaborative groups. They are seemingly both positively surprised by the challenges that group work offer, and they are less positive to the downsides of group work. The paper discusses both sides of the experiences and suggests why this might be a paradox to live with.
Distances to Dark Clouds: Comparing Extinction Distances to Maser Parallax Distances
Foster, Jonathan B; Benjamin, Robert A; Hoare, Melvin G; Jackson, James M
2012-01-01
We test two different methods of using near-infrared extinction to estimate distances to dark clouds in the first quadrant of the Galaxy using large near infrared (2MASS and UKIDSS) surveys. VLBI parallax measurements of masers around massive young stars provide the most direct and bias-free measurement of the distance to these dark clouds. We compare the extinction distance estimates to these maser parallax distances. We also compare these distances to kinematic distances, including recent re-calibrations of the Galactic rotation curve. The extinction distance methods agree with the maser parallax distances (within the errors) between 66% and 100% of the time (depending on method and input survey) and between 85% and 100% of the time outside of the crowded Galactic center. Although the sample size is small, extinction distance methods reproduce maser parallax distances better than kinematic distances; furthermore, extinction distance methods do not suffer from the kinematic distance ambiguity. This validatio...
Sets avoiding integral distances
Kurz, Sascha
2012-01-01
We study open point sets in Euclidean spaces $\\mathbb{R}^d$ without a pair of points an integral distance apart. By a result of Furstenberg, Katznelson, and Weiss such sets must be of Lebesgue upper density zero. We are interested in how large such sets can be in $d$-dimensional volume. We determine the lower and upper bounds for the volumes of the sets in terms of the number of their connected components and dimension, and also give some exact values. Our problem can be viewed as a kind of inverse to known problems on sets with pairwise rational or integral distances.
Hansen, Finn J. S.; Clausen, Christian
2001-01-01
The case study represents an example of a top-down introduction of distance teaching as part of Danish trials with the introduction of multimedia in education. The study is concerned with the background, aim and context of the trial as well as the role and working of the technology and the organi......The case study represents an example of a top-down introduction of distance teaching as part of Danish trials with the introduction of multimedia in education. The study is concerned with the background, aim and context of the trial as well as the role and working of the technology...
Greenslade, Thomas B., Jr.
1985-01-01
Discusses a series of experiments performed by Thomas Hope in 1805 which show the temperature at which water has its maximum density. Early data cast into a modern form as well as guidelines and recent data collected from the author provide background for duplicating Hope's experiments in the classroom. (JN)
Abolishing the maximum tension principle
Dabrowski, Mariusz P
2015-01-01
We find the series of example theories for which the relativistic limit of maximum tension $F_{max} = c^2/4G$ represented by the entropic force can be abolished. Among them the varying constants theories, some generalized entropy models applied both for cosmological and black hole horizons as well as some generalized uncertainty principle models.
Abolishing the maximum tension principle
Mariusz P. Da̧browski
2015-09-01
Full Text Available We find the series of example theories for which the relativistic limit of maximum tension Fmax=c4/4G represented by the entropic force can be abolished. Among them the varying constants theories, some generalized entropy models applied both for cosmological and black hole horizons as well as some generalized uncertainty principle models.
Predicting dispersal distance in mammals: a trait-based approach.
Whitmee, Sarah; Orme, C David L
2013-01-01
Dispersal is one of the principal mechanisms influencing ecological and evolutionary processes but quantitative empirical data are unfortunately scarce. As dispersal is likely to influence population responses to climate change, whether by adaptation or by migration, there is an urgent need to obtain estimates of dispersal distance. Cross-species correlative approaches identifying predictors of dispersal distance can provide much-needed insights into this data-scarce area. Here, we describe the compilation of a new data set of natal dispersal distances and use it to test life-history predictors of dispersal distance in mammals and examine the strength of the phylogenetic signal in dispersal distance. We find that both maximum and median dispersal distances have strong phylogenetic signals. No single model performs best in describing either maximum or median dispersal distances when phylogeny is taken into account but many models show high explanatory power, suggesting that dispersal distance per generation can be estimated for mammals with comparatively little data availability. Home range area, geographic range size and body mass are identified as the most important terms across models. Cross-validation of models supports the ability of these variables to predict dispersal distances, suggesting that models may be extended to species where dispersal distance is unknown.
Distances to star forming regions
Loinard, Laurent
2014-01-01
The determination of accurate distances to star-forming regions are discussed in the broader historical context of astronomical distance measurements. We summarize recent results for regions within 1 kpc and present perspectives for the near and more distance future.
McGreal, Rory; And Others
This report summarizes activities and recommendations from workshops in Northern Ontario, Canada which were designed to inform principals of the details of the distance education initiative and to examine problems involved in the delivery and reception of distance education courses at the secondary level. Separate workshops were organized for…
Saito, Atsushi; Cavalli, Valeria
2016-02-01
Neurons are extremely polarized cells. Axon lengths often exceed the dimension of the neuronal cell body by several orders of magnitude. These extreme axonal lengths imply that neurons have mastered efficient mechanisms for long distance signaling between soma and synaptic terminal. These elaborate mechanisms are required for neuronal development and maintenance of the nervous system. Neurons can fine-tune long distance signaling through calcium wave propagation and bidirectional transport of proteins, vesicles, and mRNAs along microtubules. The signal transmission over extreme lengths also ensures that information about axon injury is communicated to the soma and allows for repair mechanisms to be engaged. This review focuses on the different mechanisms employed by neurons to signal over long axonal distances and how signals are interpreted in the soma, with an emphasis on proteomic studies. We also discuss how proteomic approaches could help further deciphering the signaling mechanisms operating over long distance in axons. © 2016 by The American Society for Biochemistry and Molecular Biology, Inc.
Ortiz-Arroyo, Daniel; Yazdani, Hossein
2017-01-01
The accuracy of machine learning methods for clustering depends on the optimal selection of similarity functions. Conventional distance functions for the vector space might cause an algorithm to being affected by some dominant features that may skew its ﬁnal results. This paper introduces a ﬂexib...
Encyclopedia of Distance Learning
Howard, Caroline, Ed.; Boettecher, Judith, Ed.; Justice, Lorraine, Ed.; Schenk, Karen, Ed.; Rogers, Patricia, Ed.; Berg, Gary, Ed.
2005-01-01
The innovations in computer and communications technologies combined with on-going needs to deliver educational programs to students regardless of their physical locations, have lead to the innovation of distance education programs and technologies. To keep up with recent developments in both areas of technologies and techniques related to…
Accreditation of Distance Learning
Demirel, Ergün
2016-01-01
The higher education institutes aspire to gain reputation of quality having accreditation from internationally recognized awarding bodies. The accreditation leads and provides quality assurance for education. Although distance learning becomes a significant part of the education system in the 21st century, there is still a common opinion that the…
Rahman, Monsurur; Karim, Reza; Byramjee, Framarz
2015-01-01
Many educational institutions in the United States are currently offering programs through distance learning, and that trend is rising. In almost all spheres of education a developing country like Bangladesh needs to make available the expertise of the most qualified faculty to her distant people. But the fundamental question remains as to whether…
Murphy, Elizabeth; Rodriguez-Manzanares, Maria A.
2012-01-01
Rapport has been recognized as important in learning in general but little is known about its importance in distance education (DE). The study we report on in this paper provides insights into the importance of rapport in DE as well as challenges to and indicators of rapport-building in DE. The study relied on interviews with 42 Canadian…
Misconceptions of Astronomical Distances
Miller, Brian W.; Brewer, William F.
2010-01-01
Previous empirical studies using multiple-choice procedures have suggested that there are misconceptions about the scale of astronomical distances. The present study provides a quantitative estimate of the nature of this misconception among US university students by asking them, in an open-ended response format, to make estimates of the distances…
Maximum Genus of Strong Embeddings
Er-ling Wei; Yan-pei Liu; Han Ren
2003-01-01
The strong embedding conjecture states that any 2-connected graph has a strong embedding on some surface. It implies the circuit double cover conjecture: Any 2-connected graph has a circuit double cover.Conversely, it is not true. But for a 3-regular graph, the two conjectures are equivalent. In this paper, a characterization of graphs having a strong embedding with exactly 3 faces, which is the strong embedding of maximum genus, is given. In addition, some graphs with the property are provided. More generally, an upper bound of the maximum genus of strong embeddings of a graph is presented too. Lastly, it is shown that the interpolation theorem is true to planar Halin graph.
Remizov, Ivan D
2009-01-01
In this note, we represent a subdifferential of a maximum functional defined on the space of all real-valued continuous functions on a given metric compact set. For a given argument, $f$ it coincides with the set of all probability measures on the set of points maximizing $f$ on the initial compact set. This complete characterization lies in the heart of several important identities in microeconomics, such as Roy's identity, Sheppard's lemma, as well as duality theory in production and linear programming.
The Testability of Maximum Magnitude
Clements, R.; Schorlemmer, D.; Gonzalez, A.; Zoeller, G.; Schneider, M.
2012-12-01
Recent disasters caused by earthquakes of unexpectedly large magnitude (such as Tohoku) illustrate the need for reliable assessments of the seismic hazard. Estimates of the maximum possible magnitude M at a given fault or in a particular zone are essential parameters in probabilistic seismic hazard assessment (PSHA), but their accuracy remains untested. In this study, we discuss the testability of long-term and short-term M estimates and the limitations that arise from testing such rare events. Of considerable importance is whether or not those limitations imply a lack of testability of a useful maximum magnitude estimate, and whether this should have any influence on current PSHA methodology. We use a simple extreme value theory approach to derive a probability distribution for the expected maximum magnitude in a future time interval, and we perform a sensitivity analysis on this distribution to determine if there is a reasonable avenue available for testing M estimates as they are commonly reported today: devoid of an appropriate probability distribution of their own and estimated only for infinite time (or relatively large untestable periods). Our results imply that any attempt at testing such estimates is futile, and that the distribution is highly sensitive to M estimates only under certain optimal conditions that are rarely observed in practice. In the future we suggest that PSHA modelers be brutally honest about the uncertainty of M estimates, or must find a way to decrease its influence on the estimated hazard.
Incorporating Linguistic Structure into Maximum Entropy Language Models
FANG GaoLin(方高林); GAO Wen(高文); WANG ZhaoQi(王兆其)
2003-01-01
In statistical language models, how to integrate diverse linguistic knowledge in a general framework for long-distance dependencies is a challenging issue. In this paper, an improved language model incorporating linguistic structure into maximum entropy framework is presented.The proposed model combines trigram with the structure knowledge of base phrase in which trigram is used to capture the local relation between words, while the structure knowledge of base phrase is considered to represent the long-distance relations between syntactical structures. The knowledge of syntax, semantics and vocabulary is integrated into the maximum entropy framework.Experimental results show that the proposed model improves by 24% for language model perplexity and increases about 3% for sign language recognition rate compared with the trigram model.
Fuzzy clustering with Minkowski distance
P.J.F. Groenen (Patrick); U. Kaymak (Uzay); J.M. van Rosmalen (Joost)
2006-01-01
textabstractDistances in the well known fuzzy c-means algorithm of Bezdek (1973) are measured by the squared Euclidean distance. Other distances have been used as well in fuzzy clustering. For example, Jajuga (1991) proposed to use the L_1-distance and Bobrowski and Bezdek (1991) also used the L_inf
A distance based test on random trees
Flesia, Ana Georgina; Fraiman, Ricardo
2007-01-01
In this paper, we address the question of comparison between populations of trees. We study an statistical test based on the distance between empirical mean trees, as an analog of the two sample z statistic for comparing two means. Despite its simplicity, we can report that the test is quite powerful to separate distributions with different means but it does not distinguish between different populations with the same mean, a more complicated test should be applied in that setting. The perform...
Rabaglia, Cristina D; Maglio, Sam J; Krehm, Madelaine; Seok, Jin H; Trope, Yaacov
2016-07-01
Human languages may be more than completely arbitrary symbolic systems. A growing literature supports sound symbolism, or the existence of consistent, intuitive relationships between speech sounds and specific concepts. Prior work establishes that these sound-to-meaning mappings can shape language-related judgments and decisions, but do their effects generalize beyond merely the linguistic and truly color how we navigate our environment? We examine this possibility, relating a predominant sound symbolic distinction (vowel frontness) to a novel associate (spatial proximity) in five studies. We show that changing one vowel in a label can influence estimations of distance, impacting judgment, perception, and action. The results (1) provide the first experimental support for a relationship between vowels and spatial distance and (2) demonstrate that sound-to-meaning mappings have outcomes that extend beyond just language and can - through a single sound - influence how we perceive and behave toward objects in the world. Copyright © 2016 Elsevier B.V. All rights reserved.
Tolman's Luminosity-Distance, Poincare's Light-Distance and Cayley-Klein's Hyperbolic Distance
Pierseaux, Yves
2009-01-01
We deduce Tolman's formula of luminosity-distance in Cosmology from Poincare's definition of light-distance with Lorentz Transformation (LT).In Minkowskian metric, if distance is proper time (as it is often argued) then light-distance must be also the shortest distance, like proper duration (unlike Einstein's longest length within rest system). By introducing Poincare's proper light-distance in Einstein's basic synchronization we deduce a dilated distance between observer and receding mirror (with relativistic Doppler factor). Such a distance corresponds not to an Euclidean distance (Einstein's rigid rod) but to an Hyperbolic distance (Cayley-Klein) with a Lobatchevskian Horizon. From a basic proportionality hyperbolic distance-velocity, we deduce the law of Hubble. By following Penrose's Lobatchevskian representation of LT, we transform Special Relativity (SR) into an Hyperbolic Cosmological Relativity (HCR). by using only the LT but the whole LT. In Hyperbolic Rotation motion (basic active LT or Einstein's ...
Skillicorn, David; Walther, Olivier; Zheng, Quan
is a combination of the physical geography of the target environment, and the mental and physical cost of following a seemingly random pattern of attacks. Focusing on the distance and time between attacks and taking into consideration the transaction costs that state boundaries impose, we wish to understand what......” of North and West Africa that depicts the permeability to violence. A better understanding of how location, time, and borders condition attacks enables planning, prepositioning, and response....
Analysis of Rawinsonde Spatial Separation for Space Launch Vehicle Applications at the Eastern Range
Decker, Ryan K.
2017-01-01
Spatial separation of HR rawinsonde data is directly correlated with climatological tropospheric wind environment over ER. Stronger winds in the winter result in further downrange drift. Lighter winds in the summer result in the less horizontal drift during ascent. Maximum downrange distance can exceed 200 km during winter months. Data could misrepresent the environment the vehicle will experience during ascent. PRESTO uses all available data sources to produce the best representative, vertically complete atmosphere for launch vehicle DOL operations. Capability planned for use by NASA Space Launch System vehicle's first flight scheduled for Fall 2018.
Monge Distance between Quantum States
Zyczkowski, K; Zyczkowski, Karol; Slomczynski, Wojciech
1998-01-01
We define a metric in the space of quantum states taking the Monge distance between corresponding Husimi distributions (Q--functions). This quantity fulfills the axioms of a metric and satisfies the following semiclassical property: the distance between two coherent states is equal to the Euclidean distance between corresponding points in the classical phase space. We compute analytically distances between certain states (coherent, squeezed, Fock and thermal) and discuss a scheme for numerical computation of Monge distance for two arbitrary quantum states.
Generic maximum likely scale selection
Pedersen, Kim Steenstrup; Loog, Marco; Markussen, Bo
2007-01-01
The fundamental problem of local scale selection is addressed by means of a novel principle, which is based on maximum likelihood estimation. The principle is generally applicable to a broad variety of image models and descriptors, and provides a generic scale estimation methodology. The focus...... on second order moments of multiple measurements outputs at a fixed location. These measurements, which reflect local image structure, consist in the cases considered here of Gaussian derivatives taken at several scales and/or having different derivative orders....
Economics and Maximum Entropy Production
Lorenz, R. D.
2003-04-01
Price differentials, sales volume and profit can be seen as analogues of temperature difference, heat flow and work or entropy production in the climate system. One aspect in which economic systems exhibit more clarity than the climate is that the empirical and/or statistical mechanical tendency for systems to seek a maximum in production is very evident in economics, in that the profit motive is very clear. Noting the common link between 1/f noise, power laws and Self-Organized Criticality with Maximum Entropy Production, the power law fluctuations in security and commodity prices is not inconsistent with the analogy. There is an additional thermodynamic analogy, in that scarcity is valued. A commodity concentrated among a few traders is valued highly by the many who do not have it. The market therefore encourages via prices the spreading of those goods among a wider group, just as heat tends to diffuse, increasing entropy. I explore some empirical price-volume relationships of metals and meteorites in this context.
Gladders, M D; Burns, C R; Attard, A; Casey, M P; Hamilton, D; Mallén-Ornelas, G; Karr, J L; Poirier, S M; Sawicki, M; Barrientos, F; Barkhouse, W A; Brodwin, M; Clark, J; McNaughton, R; Ruetalo-Pacheco, M; Mochnacki, S W; Gladders, Michael D.; Clarke, Tracy E.; Burns, Christopher R.; Attard, Allen; Casey, Michael P.; Hamilton, Devon; Mallen-Ornelas, Gabriela; Karr, Jennifer L.; Poirier, Sara M.; Sawicki, Marcin; Barrientos, Felipe; Barkhouse, Wayne; Brodwin, Mark; Clark, Jason; Naughton, Rosemary Mc; Ruetalo-Pacheco, Marcelo; Mochnacki, Stefan W.
1998-01-01
We present the first set of distance limits from the David Dunlap Observatory Intermediate Velocity Cloud (DDO IVC) distance project. Such distance measures are crucial to understanding the origins and dynamics of IVCs, as the distances set most of the basic physical parameters for the clouds. Currently there are very few IVCs with reliably known distances. This paper describes in some detail the basic techniques used to measure distances, with particular emphasis on the the analysis of interstellar absorption line data, which forms the basis of our distance determinations. As an example, we provide a detailed description of our distance determination for the Draco Cloud. Preliminary distance limits for a total of eleven clouds are provided.
Advanced hierarchical distance sampling
Royle, Andy
2016-01-01
In this chapter, we cover a number of important extensions of the basic hierarchical distance-sampling (HDS) framework from Chapter 8. First, we discuss the inclusion of “individual covariates,” such as group size, in the HDS model. This is important in many surveys where animals form natural groups that are the primary observation unit, with the size of the group expected to have some influence on detectability. We also discuss HDS integrated with time-removal and double-observer or capture-recapture sampling. These “combined protocols” can be formulated as HDS models with individual covariates, and thus they have a commonality with HDS models involving group structure (group size being just another individual covariate). We cover several varieties of open-population HDS models that accommodate population dynamics. On one end of the spectrum, we cover models that allow replicate distance sampling surveys within a year, which estimate abundance relative to availability and temporary emigration through time. We consider a robust design version of that model. We then consider models with explicit dynamics based on the Dail and Madsen (2011) model and the work of Sollmann et al. (2015). The final major theme of this chapter is relatively newly developed spatial distance sampling models that accommodate explicit models describing the spatial distribution of individuals known as Point Process models. We provide novel formulations of spatial DS and HDS models in this chapter, including implementations of those models in the unmarked package using a hack of the pcount function for N-mixture models.
2016-03-02
520, 2004. 16 [12] E.C. Hall and R.M. Willett. Online convex optimization in dynamic environ- ments. Selected Topics in Signal Processing, IEEE Journal...Conference on Machine Learning, pages 1160–1167. ACM, 2008. [25] Eric P Xing, Michael I Jordan, Stuart Russell, and Andrew Y Ng. Distance metric...whereBψ is any Bregman divergence and ηt is the learning rate parameter. From ( Hall & Willett, 2015) we have: Theorem 1. G` = max θ∈Θ,`∈L ‖∇f(θ)‖ φmax = 1
Ivlev, B I
2005-01-01
Quantum tunneling between two potential wells in a magnetic field can be strongly increased when the potential barrier varies in the direction perpendicular to the line connecting the two wells and remains constant along this line. A periodic structure of the wave function is formed in the direction joining the wells. The resulting motion can be coherent like motion in a conventional narrow band periodic structure. A particle penetrates the barrier over a long distance which strongly contrasts to WKB-like tunneling. The whole problem is stationary. The coherent process can be influenced by dissipation.
Bodini, Olivier; Fernique, Thomas
2009-01-01
In this paper, a structural property of the set of lozenge tilings of a 2n-gon is highlighted. We introduce a simple combinatorial value called Hamming-distance, which is a lower bound for the flipdistance (i.e. the number of necessary local transformations involving three lozenges) between two given tilings. It is here proven that, for n5, We show that there is some deficient pairs of tilings for which the flip connection needs more flips than the combinatorial lower bound indicates.
Hansen, Finn J. S.; Clausen, Christian
2001-01-01
and the organisational set-up. It is debated which kind of social learning that has taken place. The innovation process was based on the implementation of an inflexible video-conference system without any proactive considerations of organisational change or pedagocical development. User appropriation of the technology......The case study represents an example of a top-down introduction of distance teaching as part of Danish trials with the introduction of multimedia in education. The study is concerned with the background, aim and context of the trial as well as the role and working of the technology...
Distance Learning. Volume I: Distance Learning Analysis Study.
1998-09-01
The primary focus of this project is the determination of the feasibility and cost effectiveness of applying Distance Learning strategies to 22...selected PPSCP courses and development of a Distance Learning Analysis Procedures Manual.
PERBANDINGAN EUCLIDEAN DISTANCE DENGAN CANBERRA DISTANCE PADA FACE RECOGNITION
Sendhy Rachmat Wurdianarto
2014-08-01
Full Text Available Perkembangan ilmu pada dunia komputer sangatlah pesat. Salah satu yang menandai hal ini adalah ilmu komputer telah merambah pada dunia biometrik. Arti biometrik sendiri adalah karakter-karakter manusia yang dapat digunakan untuk membedakan antara orang yang satu dengan yang lainnya. Salah satu pemanfaatan karakter / organ tubuh pada setiap manusia yang digunakan untuk identifikasi (pengenalan adalah dengan memanfaatkan wajah. Dari permasalahan diatas dalam pengenalan lebih tentang aplikasi Matlab pada Face Recognation menggunakan metode Euclidean Distance dan Canberra Distance. Model pengembangan aplikasi yang digunakan adalah model waterfall. Model waterfall beriisi rangkaian aktivitas proses yang disajikan dalam proses analisa kebutuhan, desain menggunakan UML (Unified Modeling Language, inputan objek gambar diproses menggunakan Euclidean Distance dan Canberra Distance. Kesimpulan yang dapat ditarik adalah aplikasi face Recognation menggunakan metode euclidean Distance dan Canverra Distance terdapat kelebihan dan kekurangan masing-masing. Untuk kedepannya aplikasi tersebut dapat dikembangkan dengan menggunakan objek berupa video ataupun objek lainnya. Kata kunci : Euclidean Distance, Face Recognition, Biometrik, Canberra Distance
Objects of maximum electromagnetic chirality
Fernandez-Corbaton, Ivan
2015-01-01
We introduce a definition of the electromagnetic chirality of an object and show that it has an upper bound. The upper bound is attained if and only if the object is transparent for fields of one handedness (helicity). Additionally, electromagnetic duality symmetry, i.e. helicity preservation upon scattering, turns out to be a necessary condition for reciprocal scatterers to attain the upper bound. We use these results to provide requirements for the design of such extremal scatterers. The requirements can be formulated as constraints on the polarizability tensors for dipolar scatterers or as material constitutive relations. We also outline two applications for objects of maximum electromagnetic chirality: A twofold resonantly enhanced and background free circular dichroism measurement setup, and angle independent helicity filtering glasses.
Maximum mutual information regularized classification
Wang, Jim Jing-Yan
2014-09-07
In this paper, a novel pattern classification approach is proposed by regularizing the classifier learning to maximize mutual information between the classification response and the true class label. We argue that, with the learned classifier, the uncertainty of the true class label of a data sample should be reduced by knowing its classification response as much as possible. The reduced uncertainty is measured by the mutual information between the classification response and the true class label. To this end, when learning a linear classifier, we propose to maximize the mutual information between classification responses and true class labels of training samples, besides minimizing the classification error and reducing the classifier complexity. An objective function is constructed by modeling mutual information with entropy estimation, and it is optimized by a gradient descend method in an iterative algorithm. Experiments on two real world pattern classification problems show the significant improvements achieved by maximum mutual information regularization.
The strong maximum principle revisited
Pucci, Patrizia; Serrin, James
In this paper we first present the classical maximum principle due to E. Hopf, together with an extended commentary and discussion of Hopf's paper. We emphasize the comparison technique invented by Hopf to prove this principle, which has since become a main mathematical tool for the study of second order elliptic partial differential equations and has generated an enormous number of important applications. While Hopf's principle is generally understood to apply to linear equations, it is in fact also crucial in nonlinear theories, such as those under consideration here. In particular, we shall treat and discuss recent generalizations of the strong maximum principle, and also the compact support principle, for the case of singular quasilinear elliptic differential inequalities, under generally weak assumptions on the quasilinear operators and the nonlinearities involved. Our principal interest is in necessary and sufficient conditions for the validity of both principles; in exposing and simplifying earlier proofs of corresponding results; and in extending the conclusions to wider classes of singular operators than previously considered. The results have unexpected ramifications for other problems, as will develop from the exposition, e.g. two point boundary value problems for singular quasilinear ordinary differential equations (Sections 3 and 4); the exterior Dirichlet boundary value problem (Section 5); the existence of dead cores and compact support solutions, i.e. dead cores at infinity (Section 7); Euler-Lagrange inequalities on a Riemannian manifold (Section 9); comparison and uniqueness theorems for solutions of singular quasilinear differential inequalities (Section 10). The case of p-regular elliptic inequalities is briefly considered in Section 11.
Minimal distances between SCFTs
Buican, Matthew [Department of Physics and Astronomy, Rutgers University,Piscataway, NJ 08854 (United States)
2014-01-28
We study lower bounds on the minimal distance in theory space between four-dimensional superconformal field theories (SCFTs) connected via broad classes of renormalization group (RG) flows preserving various amounts of supersymmetry (SUSY). For N=1 RG flows, the ultraviolet (UV) and infrared (IR) endpoints of the flow can be parametrically close. On the other hand, for RG flows emanating from a maximally supersymmetric SCFT, the distance to the IR theory cannot be arbitrarily small regardless of the amount of (non-trivial) SUSY preserved along the flow. The case of RG flows from N=2 UV SCFTs is more subtle. We argue that for RG flows preserving the full N=2 SUSY, there are various obstructions to finding examples with parametrically close UV and IR endpoints. Under reasonable assumptions, these obstructions include: unitarity, known bounds on the c central charge derived from associativity of the operator product expansion, and the central charge bounds of Hofman and Maldacena. On the other hand, for RG flows that break N=2→N=1, it is possible to find IR fixed points that are parametrically close to the UV ones. In this case, we argue that if the UV SCFT possesses a single stress tensor, then such RG flows excite of order all the degrees of freedom of the UV theory. Furthermore, if the UV theory has some flavor symmetry, we argue that the UV central charges should not be too large relative to certain parameters in the theory.
TOPSIS with statistical distances: A new approach to MADM
Vijaya Babu Vommi
2017-01-01
Full Text Available Multiple attribute decision making (MADM methods are very useful in choosing the best alternative among the available finite but conflicting alternatives. TOPSIS is one of the MADM methods, which is simple in its methodology and logic. In TOPSIS, Euclidean distances of each alternative from the positive and negative ideal solutions are utilized to find the best alternative. In literature, apart from Euclidean distances, the city block distances have also been tried to find the separations measures. In general, the attribute data are distributed with unequal ranges and also possess moderate to high correlations. Hence, in the present paper, use of statistical distances is proposed in place of Euclidean distances. Procedures to find the best alternatives are developed using statistical and weighted statistical distances respectively. The proposed methods are illustrated with some industrial problems taken from literature. Results show that the proposed methods can be used as new alternatives in MADM for choosing the best solutions.
Bayesian Source Separation and Localization
Knuth, K H
1998-01-01
The problem of mixed signals occurs in many different contexts; one of the most familiar being acoustics. The forward problem in acoustics consists of finding the sound pressure levels at various detectors resulting from sound signals emanating from the active acoustic sources. The inverse problem consists of using the sound recorded by the detectors to separate the signals and recover the original source waveforms. In general, the inverse problem is unsolvable without additional information. This general problem is called source separation, and several techniques have been developed that utilize maximum entropy, minimum mutual information, and maximum likelihood. In previous work, it has been demonstrated that these techniques can be recast in a Bayesian framework. This paper demonstrates the power of the Bayesian approach, which provides a natural means for incorporating prior information into a source model. An algorithm is developed that utilizes information regarding both the statistics of the amplitudes...
Gallant, Joseph
1999-04-01
One of the goals of physics education is to instill a sense of wonder in our students. We hope our natural curiosity will rub off on them and that they will apply the critical thinking skills we teach them to other aspects of their lives outside the classroom. As an example of this, consider the situation described in Milton's epic poem ``Paradise Lost''. Milton wrote that when the devil was cast out of heaven, he fell for nine days before landing in hell. In Milton's universe, hell is a separate place from Earth, but many people place hell at the center of the Earth. Based on these ideas, we can apply Newton's laws of motion to calculate the distance from heaven to Earth. This exercise is an example of the kind of intellectual exercise a physicist (or a physics student) might carry out when confronted with such information. We apply the basic principles of physics to a situation described in work of literature while making no attempt to validate or refute any philosophy, theology or ideology.
Distance distributions of photogenerated charge pairs in organic photovoltaic cells.
Barker, Alex J; Chen, Kai; Hodgkiss, Justin M
2014-08-27
Strong Coulomb interactions in organic photovoltaic cells dictate that charges must separate over relatively long distances in order to circumvent geminate recombination and produce photocurrent. In this article, we measure the distance distributions of thermalized charge pairs by accessing a regime at low temperature where charge pairs are frozen out following the primary charge separation step and recombine monomolecularly via tunneling. The exponential attenuation of tunneling rate with distance provides a sensitive probe of the distance distribution of primary charge pairs, reminiscent of electron transfer studies in proteins. By fitting recombination dynamics to distributions of recombination rates, we identified populations of charge-transfer states and well-separated charge pairs. For the wide range of materials we studied, the yield of separated charges in the tunneling regime is strongly correlated with the yield of free charges measured via their intensity-dependent bimolecular recombination dynamics at room temperature. We therefore conclude that populations of free charges are established via long-range charge separation within the thermalization time scale, thus invoking early branching between free and bound charges across an energetic barrier. Subject to assumed values of the electron tunneling attenuation constant, we estimate critical charge separation distances of ∼3-4 nm in all materials. In some blends, large fullerene crystals can enhance charge separation yields; however, the important role of the polymers is also highlighted in blends that achieved significant charge separation with minimal fullerene concentration. We expect that our approach of isolating the intrinsic properties of primary charge pairs will be of considerable value in guiding new material development and testing the validity of proposed mechanisms for long-range charge separation.
Visualizing Mixed Variable-Type Multidimensional Data Using Tree Distances
2015-09-01
VARIABLE-TYPE MULTIDIMENSIONAL DATA USING TREE DISTANCES by Yoav Shaham September 2015 Thesis Advisor: Lyn R. Whitaker Second Reader...TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE VISUALIZING MIXED VARIABLE-TYPE MULTIDIMENSIONAL DATA USING TREE DISTANCES 5...public release; distribution is unlimited 12b. DISTRIBUTION CODE 13. ABSTRACT (maximum 200 words) This research explores the use of the tree
Inferring Pedigree Graphs from Genetic Distances
Tamura, Takeyuki; Ito, Hiro
In this paper, we study a problem of inferring blood relationships which satisfy a given matrix of genetic distances between all pairs of n nodes. Blood relationships are represented by our proposed graph class, which is called a pedigree graph. A pedigree graph is a directed acyclic graph in which the maximum indegree is at most two. We show that the number of pedigree graphs which satisfy the condition of given genetic distances may be exponential, but they can be represented by one directed acyclic graph with n nodes. Moreover, an O(n3) time algorithm which solves the problem is also given. Although phylogenetic trees and phylogenetic networks are similar data structures to pedigree graphs, it seems that inferring methods for phylogenetic trees and networks cannot be applied to infer pedigree graphs since nodes of phylogenetic trees and networks represent species whereas nodes of pedigree graphs represent individuals. We also show an O(n2) time algorithm which detects a contradiction between a given pedigreee graph and distance matrix of genetic distances.
Distance stereotest using a 3-dimensional monitor for adult subjects.
Kim, Jongshin; Yang, Hee Kyung; Kim, Youngmin; Lee, Byoungho; Hwang, Jeong-Min
2011-06-01
To evaluate the validity and test-retest reliability of a contour-based 3-dimensional (3-D) monitor distance stereotest (distance 3-D stereotest) and to measure the maximum horizontal disparity that can be fused with disparity vergence for determining the largest measurable disparity of true stereopsis. Observational case series. Sixty-four normal adult subjects (age range, 23 to 39 years) were recruited. Contour-based circles (crossed disparity, 5000 to 20 seconds of arc; Microsoft Visual Studio C(++) 6.0; Microsoft, Inc, Seattle, Washington, USA) were generated on a 3-D monitor (46-inch stereoscopic display) using polarization glasses and were presented to subjects with normal binocularity at 3 m. While the position of the stimulus changed among 4 possible locations, the subjects were instructed to press the corresponding position of the stimulus on a keypad. The results with the new distance 3-D stereotest were compared with those from the distance Randot stereotest. The results of the distance 3-D stereotest and the distance Randot stereotests were identical in 64% and within 1 disparity level in 97% of normal adults. Scores obtained with the 2 tests showed a statistically significant correlation (r = 0.324, P = .009). The half-width of the 95% limit of agreement was 0.47 log seconds of arc (1.55 octaves) using the distance 3-D stereotest--similar to or better than that obtained with conventional distance stereotests. The maximum binocular disparity that can be fused with vergence was 1828 ± 794 seconds of arc (range, 4000 to 500). The distance 3-D stereotest showed good concordance with the distance Randot stereotest and relatively good test-retest reliability, supporting the validity of the distance 3-D stereotest. The normative data set obtained from the present study can serve as a useful reference for quantitative assessment of a wide range of binocular sensory abnormalities. Copyright © 2011 Elsevier Inc. All rights reserved.
Improved directional-distance filter
2008-01-01
This paper proposes a new spatial-distance weighting function.By combining the weighting function and the traditional directional-distance filter (DDF) in a novel way,a new vector filter-the adaptive distance-weighted directional-distance filter (ADWDDF)-is presented.The experimental results show that the proposed solution provides better filtering performance and preserves better image chromaticity and edge or detail information compared with the traditional DDF and some other typical vector filters.
Isolation by distance, web service
Bohonak Andrew J; Jensen Jeffrey L; Kelley Scott T
2005-01-01
Abstract Background The population genetic pattern known as "isolation by distance" results from spatially limited gene flow and is a commonly observed phenomenon in natural populations. However, few software programs exist for estimating the degree of isolation by distance among populations, and they tend not to be user-friendly. Results We have created Isolation by Distance Web Service (IBDWS) a user-friendly web interface for determining patterns of isolation by distance. Using this site, ...
Maximum Range of a Projectile Thrown from Constant-Speed Circular Motion
Poljak, Nikola
2016-11-01
The problem of determining the angle θ at which a point mass launched from ground level with a given speed v0 will reach a maximum distance is a standard exercise in mechanics. There are many possible ways of solving this problem, leading to the well-known answer of θ = π/4, producing a maximum range of D max = v0 2 / g , with g being the free-fall acceleration. Conceptually and calculationally more difficult problems have been suggested to improve student proficiency in projectile motion, with the most famous example being the Tarzan swing problem. The problem of determining the maximum distance of a point mass thrown from constant-speed circular motion is presented and analyzed in detail in this text. The calculational results confirm several conceptually derived conclusions regarding the initial throw position and provide some details on the angles and the way of throwing (underhand or overhand) that produce the maximum throw distance.
The problem of the maximum volumes and particle horizon in the Friedmann universe model
Gong, S. M.
1989-08-01
The maximum volume of the closed Friedmann universe is further investigated and is shown to be 2 x pi squared x R cubed (t), instead of pi squared x R cubed (t) as found previously. This discrepancy comes from the incomplete use of the volume formula of 3-dimensional spherical space in the astronomical literature. Mathematically, the maximum volume exists at any cosmic time t in a 3-dimensional spherical case. However, the Friedmann closed universe in expansion reaches its maximum volume only at the time of the maximum scale factor. The particle horizon has no limitation for the farthest objects in the closed Friedmann universe if the proper distance of objects is compared with the particle horizon as is should be. This leads to absurdity if the luminosity distance of objects is compared with the proper distance of the particle horizon.
Maximum entropy production in daisyworld
Maunu, Haley A.; Knuth, Kevin H.
2012-05-01
Daisyworld was first introduced in 1983 by Watson and Lovelock as a model that illustrates how life can influence a planet's climate. These models typically involve modeling a planetary surface on which black and white daisies can grow thus influencing the local surface albedo and therefore also the temperature distribution. Since then, variations of daisyworld have been applied to study problems ranging from ecological systems to global climate. Much of the interest in daisyworld models is due to the fact that they enable one to study self-regulating systems. These models are nonlinear, and as such they exhibit sensitive dependence on initial conditions, and depending on the specifics of the model they can also exhibit feedback loops, oscillations, and chaotic behavior. Many daisyworld models are thermodynamic in nature in that they rely on heat flux and temperature gradients. However, what is not well-known is whether, or even why, a daisyworld model might settle into a maximum entropy production (MEP) state. With the aim to better understand these systems, this paper will discuss what is known about the role of MEP in daisyworld models.
Maximum stellar iron core mass
F W Giacobbe
2003-03-01
An analytical method of estimating the mass of a stellar iron core, just prior to core collapse, is described in this paper. The method employed depends, in part, upon an estimate of the true relativistic mass increase experienced by electrons within a highly compressed iron core, just prior to core collapse, and is signiﬁcantly different from a more typical Chandrasekhar mass limit approach. This technique produced a maximum stellar iron core mass value of 2.69 × 1030 kg (1.35 solar masses). This mass value is very near to the typical mass values found for neutron stars in a recent survey of actual neutron star masses. Although slightly lower and higher neutron star masses may also be found, lower mass neutron stars are believed to be formed as a result of enhanced iron core compression due to the weight of non-ferrous matter overlying the iron cores within large stars. And, higher mass neutron stars are likely to be formed as a result of fallback or accretion of additional matter after an initial collapse event involving an iron core having a mass no greater than 2.69 × 1030 kg.
Maximum Matchings via Glauber Dynamics
Jindal, Anant; Pal, Manjish
2011-01-01
In this paper we study the classic problem of computing a maximum cardinality matching in general graphs $G = (V, E)$. The best known algorithm for this problem till date runs in $O(m \\sqrt{n})$ time due to Micali and Vazirani \\cite{MV80}. Even for general bipartite graphs this is the best known running time (the algorithm of Karp and Hopcroft \\cite{HK73} also achieves this bound). For regular bipartite graphs one can achieve an $O(m)$ time algorithm which, following a series of papers, has been recently improved to $O(n \\log n)$ by Goel, Kapralov and Khanna (STOC 2010) \\cite{GKK10}. In this paper we present a randomized algorithm based on the Markov Chain Monte Carlo paradigm which runs in $O(m \\log^2 n)$ time, thereby obtaining a significant improvement over \\cite{MV80}. We use a Markov chain similar to the \\emph{hard-core model} for Glauber Dynamics with \\emph{fugacity} parameter $\\lambda$, which is used to sample independent sets in a graph from the Gibbs Distribution \\cite{V99}, to design a faster algori...
Reconsidering Moore's Transactional Distance Theory
Giossos, Yiannis; Koutsouba, Maria; Lionarakis, Antonis; Skavantzos, Kosmas
2009-01-01
One of the core theories of distance education is Michael Graham Moore's "Theory of Transactional Distance" that provides the broad framework of the pedagogy of distance education and allows the generation of almost infinite number of hypotheses for research. However, the review of the existing studies relating to the theory showed the use of a…
2011-01-10
...: Establishing Maximum Allowable Operating Pressure or Maximum Operating Pressure Using Record Evidence, and... facilities of their responsibilities, under Federal integrity management (IM) regulations, to perform... system, especially when calculating Maximum Allowable Operating Pressure (MAOP) or Maximum Operating...
Stone, Wesley W.; Gilliom, Robert J.; Crawford, Charles G.
2008-01-01
Regression models were developed for predicting annual maximum and selected annual maximum moving-average concentrations of atrazine in streams using the Watershed Regressions for Pesticides (WARP) methodology developed by the National Water-Quality Assessment Program (NAWQA) of the U.S. Geological Survey (USGS). The current effort builds on the original WARP models, which were based on the annual mean and selected percentiles of the annual frequency distribution of atrazine concentrations. Estimates of annual maximum and annual maximum moving-average concentrations for selected durations are needed to characterize the levels of atrazine and other pesticides for comparison to specific water-quality benchmarks for evaluation of potential concerns regarding human health or aquatic life. Separate regression models were derived for the annual maximum and annual maximum 21-day, 60-day, and 90-day moving-average concentrations. Development of the regression models used the same explanatory variables, transformations, model development data, model validation data, and regression methods as those used in the original development of WARP. The models accounted for 72 to 75 percent of the variability in the concentration statistics among the 112 sampling sites used for model development. Predicted concentration statistics from the four models were within a factor of 10 of the observed concentration statistics for most of the model development and validation sites. Overall, performance of the models for the development and validation sites supports the application of the WARP models for predicting annual maximum and selected annual maximum moving-average atrazine concentration in streams and provides a framework to interpret the predictions in terms of uncertainty. For streams with inadequate direct measurements of atrazine concentrations, the WARP model predictions for the annual maximum and the annual maximum moving-average atrazine concentrations can be used to characterize
Koneman, Elmer; Gade, Wayne
2002-01-01
GermWare Mycology is an image-rich, CD-ROM-based instruction divided into tutorial and reference programs. The tutorial program, designed for new students, provides only for sequential progress through each of the subject modules, so that each page of information is seen. In contrast, the reference program allows the more experienced learner with random and direct access to each facet of information. The aspergilli, the agents of chromomycosis, the dermatophytes, the dimorphic fungi, the hyaline molds, the dematiaceous molds, the yeasts, and the zygomyces are divided into separate modules. The tutorial program also includes an opening 'isolation procedures' module, in which details of specimen collection, culture media, and microscopic techniques are presented. The random access program includes system maps separating out each of the fungal species, and flow diagrams allowing an algorithm approach to species identifications. A global map is also included through which each fungal species can be directly accessed by the simple click of the mouse. Random access to information on the ecology, clinical presentations, pathology and therapy of the various mycotic diseases is also a feature of the reference program. A series of self-assessment exercises is included at the end of each module, with immediate 'pop-up' feedback to both correct and incorrect answers. The entire program includes over 2500 screens and over 700 color images and diagrams. GermWare Mycology is available through the Colorado Association for Continuing Medical Laboratory Education (CACMLE), who also can provide continuing education credits for individuals who complete a separate examination. For more information contact CACMLE at (303) 321-1734 or info@cacmle.org.
The Sherpa Maximum Likelihood Estimator
Nguyen, D.; Doe, S.; Evans, I.; Hain, R.; Primini, F.
2011-07-01
A primary goal for the second release of the Chandra Source Catalog (CSC) is to include X-ray sources with as few as 5 photon counts detected in stacked observations of the same field, while maintaining acceptable detection efficiency and false source rates. Aggressive source detection methods will result in detection of many false positive source candidates. Candidate detections will then be sent to a new tool, the Maximum Likelihood Estimator (MLE), to evaluate the likelihood that a detection is a real source. MLE uses the Sherpa modeling and fitting engine to fit a model of a background and source to multiple overlapping candidate source regions. A background model is calculated by simultaneously fitting the observed photon flux in multiple background regions. This model is used to determine the quality of the fit statistic for a background-only hypothesis in the potential source region. The statistic for a background-plus-source hypothesis is calculated by adding a Gaussian source model convolved with the appropriate Chandra point spread function (PSF) and simultaneously fitting the observed photon flux in each observation in the stack. Since a candidate source may be located anywhere in the field of view of each stacked observation, a different PSF must be used for each observation because of the strong spatial dependence of the Chandra PSF. The likelihood of a valid source being detected is a function of the two statistics (for background alone, and for background-plus-source). The MLE tool is an extensible Python module with potential for use by the general Chandra user.
Vestige: Maximum likelihood phylogenetic footprinting
Maxwell Peter
2005-05-01
Full Text Available Abstract Background Phylogenetic footprinting is the identification of functional regions of DNA by their evolutionary conservation. This is achieved by comparing orthologous regions from multiple species and identifying the DNA regions that have diverged less than neutral DNA. Vestige is a phylogenetic footprinting package built on the PyEvolve toolkit that uses probabilistic molecular evolutionary modelling to represent aspects of sequence evolution, including the conventional divergence measure employed by other footprinting approaches. In addition to measuring the divergence, Vestige allows the expansion of the definition of a phylogenetic footprint to include variation in the distribution of any molecular evolutionary processes. This is achieved by displaying the distribution of model parameters that represent partitions of molecular evolutionary substitutions. Examination of the spatial incidence of these effects across regions of the genome can identify DNA segments that differ in the nature of the evolutionary process. Results Vestige was applied to a reference dataset of the SCL locus from four species and provided clear identification of the known conserved regions in this dataset. To demonstrate the flexibility to use diverse models of molecular evolution and dissect the nature of the evolutionary process Vestige was used to footprint the Ka/Ks ratio in primate BRCA1 with a codon model of evolution. Two regions of putative adaptive evolution were identified illustrating the ability of Vestige to represent the spatial distribution of distinct molecular evolutionary processes. Conclusion Vestige provides a flexible, open platform for phylogenetic footprinting. Underpinned by the PyEvolve toolkit, Vestige provides a framework for visualising the signatures of evolutionary processes across the genome of numerous organisms simultaneously. By exploiting the maximum-likelihood statistical framework, the complex interplay between mutational
Burke, Kyle; Heubach, Silvia; Huggan, Melissa; Huntemann, Svenja
2016-01-01
We study the computational complexity of distance games, a class of combinatorial games played on graphs. A move consists of colouring an uncoloured vertex subject to it not being at certain distances determined by two sets, D and S. D is the set of forbidden distances for colouring vertices in different colors, while S is the set of forbidden distances for the same colour. The last player to move wins. Well-known examples of distance games are Node-Kayles, Snort, and Col, whose complexities ...
Distance learning and perioperative nursing.
Gruendemann, Barbara J
2007-03-01
Distance learning in nursing education is arriving with unprecedented speed, which has led to much uncertainty among educators. This article provides an overview of distance learning and its application to perioperative nursing. Lack of face-to-face interaction is of foremost concern in distance learning, and educators must develop new teaching strategies to address this problem. Models for assessing outcomes and effectiveness are important tools to use when implementing a distance learning program. Basic perioperative nursing concepts, skills, procedures, and recommended practices can be introduced effectively with online distance learning modalities and then reinforced through a clinical component.
Paintball velocity as a function of distance traveled
Pat Chiarawongse
2008-06-01
Full Text Available The relationship between the distance a paintball travels through air and its velocity is investigated by firing a paintball into a ballistic pendulum from a range of distances. The motion of the pendulum was filmed and analyzed by using video analysis software. The velocity of the paintball on impact was calculated from the maximum horizontal displacement of the pendulum. It is shown that the velocity of a paintball decreases exponentially with distance traveled, as expected. The average muzzle velocity of the paint balls is found with an estimate of the drag coefficient
Paintball velocity as a function of distance traveled
Pat Chiarawongse
2008-06-01
Full Text Available The relationship between the distance a paintball travels through air and its velocity is investigated by firing a paintball into a ballistic pendulum from a range of distances. The motion of the pendulum was filmed and analyzed by using video analysis software. The velocity of the paintball on impact was calculated from the maximum horizontal displacement of the pendulum. It is shown that the velocity of a paintball decreases exponentially with distance traveled, as expected. The average muzzle velocity of the paint balls is found with an estimate of the drag coefficient.
Distance learning in the digital environment.
Wiggins, R H; Katzman, G L; Dilda, P; Harnsberger, H R; Davidson, H C
2001-06-01
The expansion of radiology departments and divisions often can not occur in adjacent geographic locations. This leads to a greater separation of staff and residents, as well as workers in similar divisions. This makes traditional teaching difficult in academic institutions. The economic drive forcing many departments to investigate more isolated outpatient imaging centers has further hindered the ability to continue effective academic training at many facilities. The ability to easily share a digital environment across physical distance can greatly enhance the teaching experience, as well as be a valuable tool for consultation and case discussion with referring clinicians. The transition to a filmless environment with picture archiving and communication systems (PACS) can be utilized for distance learning in addition to the clinical arena. It is possible to take advantage of the digital transformation to PACS and case-viewing browser programs to conduct improved interactions with referring clinicians as well as radiologic teaching with relatively minimal hardware and software demands. The integration of web-based teleradiology programs with business networking software can be used for effective distance learning in the digital environment, sufficiently closing the distance on our rapidly expanding departments. This same technology allows for greater interaction with referring clinicians for real-time consultation and enhanced case discussion to entrench a supportive referral base for the radiologic community.
Binney, James; Kordopatis, Georges; McMillan, Paul J; Sharma, Sanjib; Zwitter, Tomaz; Bienayme, Olivier; Bland-Hawthorn, Joss; Steinmetz, Matthias; Gilmore, Gerry; Williams, Mary E K; Navarro, Julio; Grebel, Eva K; Helmi, Amina; Parker, Quentin; Reid, Warren A; Seabroke, George; Watson, Fred; Wyse, Rosie F G
2013-01-01
Probability density functions are determined from new stellar parameters for the distance moduli of stars for which the RAdial Velocity Experiment (RAVE) has obtained spectra with S/N>=10. The expectation value of distance is larger than the distance implied by the expectation of distance modulus; the latter is itself larger than the distance implied by the expectation value of the parallax. Our parallaxes of Hipparcos stars agree well with the values measured by Hipparcos, so the expectation of parallax is the most reliable distance indicator. The latter are improved by taking extinction into account. We provide one- two- or three-Gaussian fits to the distance pdfs. The effective temperature absolute-magnitude diagram of our stars is significantly improved when these pdfs are used to make the diagram. We use the method of kinematic corrections devised by Schoenrich, Binney & Asplund to check for systematic errors in our estimators for ordinary stars and confirm the conclusion reached from the Hipparcos s...
Residential mobility and migration of the separated
Maarten van Ham
2007-12-01
Full Text Available Separation is known to have a disruptive effect on the housing careers of those involved, mainly because a decrease in resources causes (temporary downward moves on the housing ladder. Little is known about the geographies of the residential mobility behaviour of the separated. Applying a hazard analysis to retrospective life-course data for the Netherlands, we investigate three hypotheses: individuals who experienced separation move more often than do steady singles and people in intact couple relationships, they are less likely to move over long distances, and they move more often to cities than people in intact couple relationships. The results show that separation leads to an increase in mobility, to moves over short distance for men with children, and to a prevalence of the city as a destination of moves.
Finding maximum JPEG image block code size
Lakhani, Gopal
2012-07-01
We present a study of JPEG baseline coding. It aims to determine the minimum storage needed to buffer the JPEG Huffman code bits of 8-bit image blocks. Since DC is coded separately, and the encoder represents each AC coefficient by a pair of run-length/AC coefficient level, the net problem is to perform an efficient search for the optimal run-level pair sequence. We formulate it as a two-dimensional, nonlinear, integer programming problem and solve it using a branch-and-bound based search method. We derive two types of constraints to prune the search space. The first one is given as an upper-bound for the sum of squares of AC coefficients of a block, and it is used to discard sequences that cannot represent valid DCT blocks. The second type constraints are based on some interesting properties of the Huffman code table, and these are used to prune sequences that cannot be part of optimal solutions. Our main result is that if the default JPEG compression setting is used, space of minimum of 346 bits and maximum of 433 bits is sufficient to buffer the AC code bits of 8-bit image blocks. Our implementation also pruned the search space extremely well; the first constraint reduced the initial search space of 4 nodes down to less than 2 nodes, and the second set of constraints reduced it further by 97.8%.
Fast computation of distance estimators
Lagergren Jens
2007-03-01
Full Text Available Abstract Background Some distance methods are among the most commonly used methods for reconstructing phylogenetic trees from sequence data. The input to a distance method is a distance matrix, containing estimated pairwise distances between all pairs of taxa. Distance methods themselves are often fast, e.g., the famous and popular Neighbor Joining (NJ algorithm reconstructs a phylogeny of n taxa in time O(n3. Unfortunately, the fastest practical algorithms known for Computing the distance matrix, from n sequences of length l, takes time proportional to l·n2. Since the sequence length typically is much larger than the number of taxa, the distance estimation is the bottleneck in phylogeny reconstruction. This bottleneck is especially apparent in reconstruction of large phylogenies or in applications where many trees have to be reconstructed, e.g., bootstrapping and genome wide applications. Results We give an advanced algorithm for Computing the number of mutational events between DNA sequences which is significantly faster than both Phylip and Paup. Moreover, we give a new method for estimating pairwise distances between sequences which contain ambiguity Symbols. This new method is shown to be more accurate as well as faster than earlier methods. Conclusion Our novel algorithm for Computing distance estimators provides a valuable tool in phylogeny reconstruction. Since the running time of our distance estimation algorithm is comparable to that of most distance methods, the previous bottleneck is removed. All distance methods, such as NJ, require a distance matrix as input and, hence, our novel algorithm significantly improves the overall running time of all distance methods. In particular, we show for real world biological applications how the running time of phylogeny reconstruction using NJ is improved from a matter of hours to a matter of seconds.
Planning with Reachable Distances
Tang, Xinyu
2009-01-01
Motion planning for spatially constrained robots is difficult due to additional constraints placed on the robot, such as closure constraints for closed chains or requirements on end effector placement for articulated linkages. It is usually computationally too expensive to apply sampling-based planners to these problems since it is difficult to generate valid configurations. We overcome this challenge by redefining the robot\\'s degrees of freedom and constraints into a new set of parameters, called reachable distance space (RD-space), in which all configurations lie in the set of constraint-satisfying subspaces. This enables us to directly sample the constrained subspaces with complexity linear in the robot\\'s number of degrees of freedom. In addition to supporting efficient sampling, we show that the RD-space formulation naturally supports planning, and in particular, we design a local planner suitable for use by sampling-based planners. We demonstrate the effectiveness and efficiency of our approach for several systems including closed chain planning with multiple loops, restricted end effector sampling, and on-line planning for drawing/sculpting. We can sample single-loop closed chain systems with 1000 links in time comparable to open chain sampling, and we can generate samples for 1000-link multi-loop systems of varying topology in less than a second. © 2009 Springer-Verlag.
Jensen, Jonas Buhrkal; Birkedal, Lars
2012-01-01
, separation means physical separation. In this paper, we introduce \\emph{fictional separation logic}, which includes more general forms of fictional separating conjunctions P * Q, where "*" does not require physical separation, but may also be used in situations where the memory resources described by P and Q...
Adachi, J; Hasegawa, M
1995-06-01
The internal branch lengths estimated by distance methods such as neighbor-joining are shown to be biased to be short when the evolutionary rate differs among sites. The variable-invariable model for site heterogeneity fits the amino acid sequence data encoded by the mitochondrial DNA from Hominoidea remarkably well. By assuming the orangutan separation to be 13 or 16 Myr old, a maximum-likelihood analysis estimates a young date of 3.6 +/- 0.6 or 4.4 +/- 0.7 Myr (+/- 1 SE) for the human/chimpanzee separation, and these estimates turn out to be robust against differences in the assumed model for amino acid substitutions. Although some uncertainties still exist in our estimates, this analysis suggests that humans separated from chimpanzees some 4-5 Myr ago.
Scaling of Natal Dispersal Distances in Terrestrial Birds and Mammals
Glenn D. Sutherland
2000-07-01
Full Text Available Natal dispersal is a process that is critical in the spatial dynamics of populations, including population spread, recolonization, and gene flow. It is a central focus of conservation issues for many vertebrate species. Using data for 77 bird and 68 mammal species, we tested whether median and maximum natal dispersal distances were correlated with body mass, diet type, social system, taxonomic family, and migratory status. Body mass and diet type were found to predict both median and maximum natal dispersal distances in mammals: large species dispersed farther than small ones, and carnivorous species dispersed farther than herbivores and omnivores. Similar relationships occurred for carnivorous bird species, but not for herbivorous or omnivorous ones. Natal dispersal distances in birds or mammals were not significantly related to broad categories of social systems. Only in birds were factors such as taxonomic relatedness and migratory status correlated with natal dispersal, and then only for maximum distances. Summary properties of dispersal processes appeared to be derived from interactions among behavioral and morphological characteristics of species and from their linkages to the dynamics of resource availability in landscapes. In all the species we examined, most dispersers moved relatively short distances, and long-distance dispersal was uncommon. On the basis of these findings, we fit an empirical model based on the negative exponential distribution for calculating minimum probabilities that animals disperse particular distances from their natal areas. This model, coupled with knowledge of a species' body mass and diet type, can be used to conservatively predict dispersal distances for different species and examine possible consequences of large-scale habitat alterations on connectedness between populations. Taken together, our results can provide managers with the means to identify species vulnerable to landscape-level habitat changes
Maximum tunneling velocities in symmetric double well potentials
Manz, Jörn; Schmidt, Burkhard; Yang, Yonggang
2014-01-01
We consider coherent tunneling of one-dimensional model systems in non-cyclic or cyclic symmetric double well potentials. Generic potentials are constructed which allow for analytical estimates of the quantum dynamics in the non-relativistic deep tunneling regime, in terms of the tunneling distance, barrier height and mass (or moment of inertia). For cyclic systems, the results may be scaled to agree well with periodic potentials for which semi-analytical results in terms of Mathieu functions exist. Starting from a wavepacket which is initially localized in one of the potential wells, the subsequent periodic tunneling is associated with tunneling velocities. These velocities (or angular velocities) are evaluated as the ratio of the flux densities versus the probability densities. The maximum velocities are found under the top of the barrier where they scale as the square root of the ratio of barrier height and mass (or moment of inertia), independent of the tunneling distance. They are applied exemplarily to ...
Building Sense of Community at a Distance
Alfred P. Rovai
2002-04-01
Full Text Available This article challenges the belief that strong sense of community is limited to the traditional classroom and proposes that the virtual classroom has the potential of building and sustaining sense of community at levels that are comparable to the traditional classroom. Drawing on research literature, the concept of learning community is applied to the virtual classroom by taking on the issue of how best to design and conduct an online course that fosters community among learners who are physically separated from each other. Course design principles are described that facilitate dialogue and decrease psychological distance, thereby increasing a sense of community among learners.
Separation Anxiety (For Parents)
... Kids to Be Smart About Social Media Separation Anxiety KidsHealth > For Parents > Separation Anxiety Print A A ... both of you get through it. About Separation Anxiety Babies adapt pretty well to other caregivers. Parents ...
Separation Anxiety (For Parents)
... Feeding Your 1- to 2-Year-Old Separation Anxiety KidsHealth > For Parents > Separation Anxiety A A A ... both of you get through it. About Separation Anxiety Babies adapt pretty well to other caregivers. Parents ...
On distances between phylogenetic trees
DasGupta, B. [Rutgers Univ., Camden, NJ (United States); He, X. [SUNY, Buffalo, NY (United States); Jiang, T. [McMaster Univ., Hamilton, Ontario (Canada)] [and others
1997-06-01
Different phylogenetic trees for the same group of species are often produced either by procedures that use diverse optimality criteria or from different genes in the study of molecular evolution. Comparing these trees to find their similarities and dissimilarities, i.e. distance, is thus an important issue in computational molecular biology. The nearest neighbor interchange distance and the subtree-transfer distance are two major distance metrics that have been proposed and extensively studied for different reasons. Despite their many appealing aspects such as simplicity and sensitivity to tree topologies, computing these distances has remained very challenging. This article studies the complexity and efficient approximation algorithms for computing the nni distance and a natural extension of the subtree-transfer distance, called the linear-cost subtree-transfer distance. The linear-cost subtree-transfer model is more logical than the subtree-transfer model and in fact coincides with the nni model under certain conditions. The following results have been obtained as part of our project of building a comprehensive software package for computing distances between phylogenies. (1) Computing the nni distance is NP-complete. This solves a 25 year old open question appearing again and again in, for example, under the complexity-theoretic assumption of P {ne} NP. We also answer an open question regarding the nni distance between unlabeled trees for which an erroneous proof appeared in. We give an algorithm to compute the optimal nni sequence in time O(n{sup 2} logn + n {circ} 2{sup O(d)}), where the nni distance is at most d. (2) Biological applications require us to extend the nni and linear-cost subtree-transfer models to weighted phylogenies, where edge weights indicate the length of evolution along each edge. We present a logarithmic ratio approximation algorithm for nni and a ratio 2 approximation algorithm for linear-cost subtree-transfer, on weighted trees.
DISTANCE EDUCATOR: A Multiskill Personality
Sangeeta MALIK
2013-01-01
Full Text Available When we talk about a distance educator and a conventional educator the difference we found nd about both of them is that, a distance educator needs to play multiple roles as compared to a conventional educator. They require more skills and knowledge cater to the needs of the learner. In this article we will cover all the responsible areas of a distance educator & why we should consider them as a multiskill personality?
378 Average Distance Travelled To School by Primary and ...
User
2010-10-17
Oct 17, 2010 ... students walk over one kilometer to school, the outcomes would not be in the .... respondents were the heads of the primary and secondary schools .... maximum distance as low as 28.57% for primary school pupils and 18.75 ...
Real-time Loudspeaker Distance Estimation with Stereo Audio
Nielsen, Jesper Kjær; Gaubitch, Nikolay; Heusdens, Richard
2015-01-01
. In this paper, we propose to use the desired audio signal instead. Specifically, we treat the case of estimating the distance between two loudspeakers playing back a stereo music or speech signal. In this connection, we develop a real-time maximum likelihood estimator and demonstrate that it has a variance...
Bayesian and maximum likelihood estimation of genetic maps
York, Thomas L.; Durrett, Richard T.; Tanksley, Steven;
2005-01-01
There has recently been increased interest in the use of Markov Chain Monte Carlo (MCMC)-based Bayesian methods for estimating genetic maps. The advantage of these methods is that they can deal accurately with missing data and genotyping errors. Here we present an extension of the previous methods...... that makes the Bayesian method applicable to large data sets. We present an extensive simulation study examining the statistical properties of the method and comparing it with the likelihood method implemented in Mapmaker. We show that the Maximum A Posteriori (MAP) estimator of the genetic distances...
Doctoral education from a distance.
Effken, Judith A
2008-12-01
This article describes the environmental factors that have contributed to the recent rapid growth of nursing doctoral education at a distance. Early and recent efforts to deliver distance doctoral education are discussed, using The University of Arizona College of Nursing experience as the key exemplar. The Community of Inquiry model is introduced as an appropriate model for doctoral education and then used as a framework to evaluate the current state of the art in distance doctoral nursing education. Successes and challenges in delivering doctoral education from a distance are described.
The Extended Edit Distance Metric
Fuad, Muhammad Marwan Muhammad
2007-01-01
Similarity search is an important problem in information retrieval. This similarity is based on a distance. Symbolic representation of time series has attracted many researchers recently, since it reduces the dimensionality of these high dimensional data objects. We propose a new distance metric that is applied to symbolic data objects and we test it on time series data bases in a classification task. We compare it to other distances that are well known in the literature for symbolic data objects. We also prove, mathematically, that our distance is metric.
Transactional Distance and Autonomy in a Distance Learning Environment
Vasiloudis, G.; Koutsouba, M.; Giossos, Y.; Mavroidis, I.
2015-01-01
This paper studies the transactional distance between the students and the tutor as well as the autonomy of students in a postgraduate course of the Hellenic Open University (HOU). The aim of the paper is to examine how the relation between autonomy and transactional distance evolves during an academic year and how this relation is affected by…
Distance spectra and Distance energy of Integral Circulant Graphs
c, Aleksandar Ili\\'
2011-01-01
The distance energy of a graph $G$ is a recently developed energy-type invariant, defined as the sum of absolute values of the eigenvalues of the distance matrix of $G$. There was a vast research for the pairs and families of non-cospectral graphs having equal distance energy, and most of these constructions were based on the join of graphs. A graph is called circulant if it is Cayley graph on the circulant group, i.e. its adjacency matrix is circulant. A graph is called integral if all eigenvalues of its adjacency matrix are integers. Integral circulant graphs play an important role in modeling quantum spin networks supporting the perfect state transfer. In this paper, we characterize the distance spectra of integral circulant graphs and prove that these graphs have integral eigenvalues of distance matrix $D$. Furthermore, we calculate the distance spectra and distance energy of unitary Cayley graphs. In conclusion, we present two families of pairs $(G_1, G_2)$ of integral circulant graphs with equal distanc...
Receiver function estimated by maximum entropy deconvolution
吴庆举; 田小波; 张乃铃; 李卫平; 曾融生
2003-01-01
Maximum entropy deconvolution is presented to estimate receiver function, with the maximum entropy as the rule to determine auto-correlation and cross-correlation functions. The Toeplitz equation and Levinson algorithm are used to calculate the iterative formula of error-predicting filter, and receiver function is then estimated. During extrapolation, reflective coefficient is always less than 1, which keeps maximum entropy deconvolution stable. The maximum entropy of the data outside window increases the resolution of receiver function. Both synthetic and real seismograms show that maximum entropy deconvolution is an effective method to measure receiver function in time-domain.
Separation of Particles in Channels Rotary Engine
Zyatikov Pavel
2015-01-01
Full Text Available The article considers the separation of particles in channels with different relative length. It is shown that the intensity of turbulence at the inlet section of the channel varies considerably in its length. The dependence of the turbulence damping along the channel expressing by fraction of the distance is shown. The ratio of the particle separation efficiency out the gas flow in the rotor channel is defined. The values of particle separation efficiency in the channel for the angle α=π/4 in turbulent aerosol flow is shows, including without mixing the particles.
Maximum Power from a Solar Panel
Michael Miller
2010-01-01
Full Text Available Solar energy has become a promising alternative to conventional fossil fuel sources. Solar panels are used to collect solar radiation and convert it into electricity. One of the techniques used to maximize the effectiveness of this energy alternative is to maximize the power output of the solar collector. In this project the maximum power is calculated by determining the voltage and the current of maximum power. These quantities are determined by finding the maximum value for the equation for power using differentiation. After the maximum values are found for each time of day, each individual quantity, voltage of maximum power, current of maximum power, and maximum power is plotted as a function of the time of day.
Virtual Bioinformatics Distance Learning Suite
Tolvanen, Martti; Vihinen, Mauno
2004-01-01
Distance learning as a computer-aided concept allows students to take courses from anywhere at any time. In bioinformatics, computers are needed to collect, store, process, and analyze massive amounts of biological and biomedical data. We have applied the concept of distance learning in virtual bioinformatics to provide university course material…
The Psychology of Psychic Distance
Håkanson, Lars; Ambos, Björn; Schuster, Anja
2016-01-01
and their theoretical underpinnings assume psychic distances to be symmetric. Building on insights from psychology and sociology, this paper demonstrates how national factors and cognitive processes interact in the formation of asymmetric distance perceptions. The results suggest that exposure to other countries...
Quality Content in Distance Education
Yildiz, Ezgi Pelin; Isman, Aytekin
2016-01-01
In parallel with technological advances in today's world of education activities can be conducted without the constraints of time and space. One of the most important of these activities is distance education. The success of the distance education is possible with content quality. The proliferation of e-learning environment has brought a need for…
Virtual Bioinformatics Distance Learning Suite
Tolvanen, Martti; Vihinen, Mauno
2004-01-01
Distance learning as a computer-aided concept allows students to take courses from anywhere at any time. In bioinformatics, computers are needed to collect, store, process, and analyze massive amounts of biological and biomedical data. We have applied the concept of distance learning in virtual bioinformatics to provide university course material…
Distance labeling schemes for trees
Alstrup, Stephen; Gørtz, Inge Li; Bistrup Halvorsen, Esben;
2016-01-01
We consider distance labeling schemes for trees: given a tree with n nodes, label the nodes with binary strings such that, given the labels of any two nodes, one can determine, by looking only at the labels, the distance in the tree between the two nodes. A lower bound by Gavoille et al. [Gavoill...
Binney, J.; Burnett, B.; Kordopatis, G.; McMillan, P. J.; Sharma, S.; Zwitter, T.; Bienayme, O.; Bland-Hawthorn, J.; Steinmetz, M.; Gilmore, G.; Williams, M. E. K.; Navarro, J.; Grebel, E. K.; Helmi, A.; Parker, Q.; Reid, W. A.; Seabroke, G.; Watson, F.; Wyse, R. F. G.
Probability density functions (pdfs) are determined from new stellar parameters for the distance moduli of stars for which the RAdial Velocity Experiment (RAVE) has obtained spectra with S/N >= 10. Single-Gaussian fits to the pdf in distance modulus suffice for roughly half the stars, with most of
Distance labeling schemes for trees
Alstrup, Stephen; Gørtz, Inge Li; Bistrup Halvorsen, Esben
2016-01-01
variants such as, for example, small distances in trees [Alstrup et al., SODA, 2003]. We improve the known upper and lower bounds of exact distance labeling by showing that 1/4 log2(n) bits are needed and that 1/2 log2(n) bits are sufficient. We also give (1 + ε)-stretch labeling schemes using Theta...
Faculty Attitudes about Distance Education
Smidt, Esther; McDyre, Brian; Bunk, Jennifer; Li, Rui; Gatenby, Tanya
2014-01-01
In recent years, there has been a dramatic increase in distance learning in higher education. Given this, it is extremely important to understand faculty attitudes about distance education, not only because they can vary widely, but also because it is the faculty, through their design and implementation of online courses, that will shape the…
Distance-constrained grid colouring
Aszalós László
2016-06-01
Full Text Available Distance-constrained colouring is a mathematical model of the frequency assignment problem. This colouring can be treated as an optimization problem so we can use the toolbar of the optimization to solve concrete problems. In this paper, we show performance of distance-constrained grid colouring for two methods which are good in map colouring.
Hierarchical traits distances explain grassland Fabaceae species’ ecological niches distances
Florian eFort
2015-02-01
Full Text Available Fabaceae species play a key role in ecosystem functioning through their capacity to fix atmospheric nitrogen via their symbiosis with Rhizobium bacteria. To increase benefits of using Fabaceae in agricultural systems, it is necessary to find ways to evaluate species or genotypes having potential adaptations to sub-optimal growth conditions. We evaluated the relevance of phylogenetic distance, absolute trait distance and hierarchical trait distance for comparing the adaptation of 13 grassland Fabaceae species to different habitats, i.e. ecological niches. We measured a wide range of functional traits (root traits, leaf traits and whole plant traits in these species. Species phylogenetic and ecological distances were assessed from a species-level phylogenetic tree and species’ ecological indicator values, respectively. We demonstrated that differences in ecological niches between grassland Fabaceae species were related more to their hierarchical trait distances than to their phylogenetic distances. We showed that grassland Fabaceae functional traits tend to converge among species with the same ecological requirements. Species with acquisitive root strategies (thin roots, shallow root systems are competitive species adapted to non-stressful meadows, while conservative ones (coarse roots, deep root systems are able to tolerate stressful continental climates. In contrast, acquisitive species appeared to be able to tolerate low soil-P availability, while conservative ones need high P availability. Finally we highlight that traits converge along the ecological gradient, providing the assumption that species with similar root-trait values are better able to coexist, regardless of their phylogenetic distance.
On the rate of convergence of the maximum likelihood estimator of a k-monotone density
WELLNER; Jon; A
2009-01-01
Bounds for the bracketing entropy of the classes of bounded k-monotone functions on [0,A] are obtained under both the Hellinger distance and the Lp(Q) distance,where 1 p < ∞ and Q is a probability measure on [0,A].The result is then applied to obtain the rate of convergence of the maximum likelihood estimator of a k-monotone density.
On the rate of convergence of the maximum likelihood estimator of a K-monotone density
GAO FuChang; WELLNER Jon A
2009-01-01
Bounds for the bracketing entropy of the classes of bounded K-monotone functions on [0, A] are obtained under both the Hellinger distance and the LP(Q) distance, where 1 ≤ p < ∞ and Q is a probability measure on [0, A]. The result is then applied to obtain the rate of convergence of the maximum likelihood estimator of a K-monotone density.
Controlling Separation in Turbomachines
Evans, Simon; Himmel, Christoph; Power, Bronwyn; Wakelam, Christian; Xu, Liping; Hynes, Tom; Hodson, Howard
2010-01-01
Four examples of flow control: 1) Passive control of LP turbine blades (Laminar separation control). 2) Aspiration of a conventional axial compressor blade (Turbulent separation control). 3) Compressor blade designed for aspiration (Turbulent separation control). 4.Control of intakes in crosswinds (Turbulent separation control).
Distance labeling schemes for trees
Alstrup, Stephen; Gørtz, Inge Li; Bistrup Halvorsen, Esben
2016-01-01
We consider distance labeling schemes for trees: given a tree with n nodes, label the nodes with binary strings such that, given the labels of any two nodes, one can determine, by looking only at the labels, the distance in the tree between the two nodes. A lower bound by Gavoille et al. [Gavoille...... variants such as, for example, small distances in trees [Alstrup et al., SODA, 2003]. We improve the known upper and lower bounds of exact distance labeling by showing that 1/4 log2(n) bits are needed and that 1/2 log2(n) bits are sufficient. We also give (1 + ε)-stretch labeling schemes using Theta......(log(n)) bits for constant ε> 0. (1 + ε)-stretch labeling schemes with polylogarithmic label size have previously been established for doubling dimension graphs by Talwar [Talwar, STOC, 2004]. In addition, we present matching upper and lower bounds for distance labeling for caterpillars, showing that labels...
Flowfield measurements in a separated and reattached flat plate turbulent boundary layer
Patrick, William P.
1987-03-01
The separation and reattachment of a large-scale, two-dimensional turbulent boundary layer at low subsonic speed on a flat plate has been studied experimentally. The separation bubble was 55 cm long and had a maximum bubble thickness, measured to the height of the mean dividing streamline, of 17 cm, which was twice the thickness of the inlet boundary layer. A combination of laser velocimetry, hot-wire anemometry, pneumatic probing techniques, and flow visualization were used as diagnostics. Principal findings were that an outer inviscid rotational flow was defined which essentially convected over the blockage associated with the inner, viscously dominated bubble recirculation region. A strong backflow region in which the flow moved upstream 100 percent of the time was measured near the test surface over the central 35 percent of the bubble. A laminar backflow boundary layer having pseudo-turbulent characteristics including a log-linear velocity profile was generated under the highly turbulent backflow. Velocity profile shapes in the reversed flow region matched a previously developed universal backflow profile at the upstream edge of the separation region but not in the steady backflow region downstream. A smoke flow visualization movie and hot-film measurements revealed low frequency nonperiodic flapping at reattachment. However, forward flow fraction data at reattachment and mean velocity profiles in the redeveloping boundary layer downstream of reattachment correlated with backward-facing step data when the axial dimension was scaled by the distance from the maximum bubble thickness to reattachment.
Maximum range of a projectile thrown from constant-speed circular motion
Poljak, Nikola
2016-01-01
The problem of determining the angle at which a point mass launched from ground level with a given speed is a standard exercise in mechanics. Similar, yet conceptually and calculationally more difficult problems have been suggested to improve student proficiency in projectile motion. The problem of determining the maximum distance of a rock thrown from a rotating arm motion is presented and analyzed in detail in this text. The calculational results confirm several conceptually derived conclusions regarding the initial throw position and provide some details on the angles and the way of throwing (underhand or overhand) which produce the maximum throw distance.
Efficient Indoor Proximity and Separation Detection for Location Fingerprinting
Kjærgaard, Mikkel Baun; Treu, Georg; Ruppel, Peter
2008-01-01
, and for distance calculations the particular building topology has to be taken into account. To address these challenges, this paper presents a novel approach for indoor proximity and separation detection, which uses location fingerprinting for indoor positioning of targets and walking distances for modeling...
[Evolutionary process unveiled by the maximum genetic diversity hypothesis].
Huang, Yi-Min; Xia, Meng-Ying; Huang, Shi
2013-05-01
As two major popular theories to explain evolutionary facts, the neutral theory and Neo-Darwinism, despite their proven virtues in certain areas, still fail to offer comprehensive explanations to such fundamental evolutionary phenomena as the genetic equidistance result, abundant overlap sites, increase in complexity over time, incomplete understanding of genetic diversity, and inconsistencies with fossil and archaeological records. Maximum genetic diversity hypothesis (MGD), however, constructs a more complete evolutionary genetics theory that incorporates all of the proven virtues of existing theories and adds to them the novel concept of a maximum or optimum limit on genetic distance or diversity. It has yet to meet a contradiction and explained for the first time the half-century old Genetic Equidistance phenomenon as well as most other major evolutionary facts. It provides practical and quantitative ways of studying complexity. Molecular interpretation using MGD-based methods reveal novel insights on the origins of humans and other primates that are consistent with fossil evidence and common sense, and reestablished the important role of China in the evolution of humans. MGD theory has also uncovered an important genetic mechanism in the construction of complex traits and the pathogenesis of complex diseases. We here made a series of sequence comparisons among yeasts, fishes and primates to illustrate the concept of limit on genetic distance. The idea of limit or optimum is in line with the yin-yang paradigm in the traditional Chinese view of the universal creative law in nature.
Hyperstereopsis in helmet-mounted NVDs: absolute distance perception
Flanagan, Patrick; Stuart, Geoffrey W.; Gibbs, Peter
2007-04-01
Modern helmet-mounted night vision devices, such as the Thales TopOwl helmet, project imagery from intensifiers mounted on the side of the helmet onto the helmet faceplate. The increased separation of the cameras induces hyperstereopsis - the exaggeration of the stereoscopic disparities that support the perception of relative depth around the point of fixation. Increased camera separation may also affect absolute depth perception, because it increases the amount of vergence (crossing) of the eyes required for binocular fusion, and because the differential perspective from the viewpoints of the two eyes is increased. The effect of hyperstereopsis on the perception of absolute distance was investigated using a large-scale stereoscopic display system. A fronto-parallel textured surface was projected at a distance of 6 metres. Three stereoscopic viewing conditions were simulated - hyperstereopsis (four times magnification), normal stereopsis, and hypostereopsis (one quarter magnification). The apparent distance of the surface was measured relative to a grid placed in a virtual "leaf room" that provided rich monocular cues, such as texture gradients and linear perspective, to absolute distance as well as veridical sterescopic disparity cues. The different stereoscopic viewing conditions had no differential effect on the apparent distance of the textured surface at this viewing distance.
The inverse maximum dynamic flow problem
BAGHERIAN; Mehri
2010-01-01
We consider the inverse maximum dynamic flow (IMDF) problem.IMDF problem can be described as: how to change the capacity vector of a dynamic network as little as possible so that a given feasible dynamic flow becomes a maximum dynamic flow.After discussing some characteristics of this problem,it is converted to a constrained minimum dynamic cut problem.Then an efficient algorithm which uses two maximum dynamic flow algorithms is proposed to solve the problem.
Reducing the distance in distance-caregiving by technology innovation
Lazelle E Benefield
2007-07-01
Full Text Available Lazelle E Benefield1, Cornelia Beck21College of Nursing, University of Oklahoma Health Sciences Center, Oklahoma City, Oklahoma, USA; 2Pat & Willard Walker Family Memory Research Center, University of Arkansas for Medical Sciences, Little Rock, Arkansas, USAAbstract: Family caregivers are responsible for the home care of over 34 million older adults in the United States. For many, the elder family member lives more than an hour’s distance away. Distance caregiving is a growing alternative to more familiar models where: 1 the elder and the family caregiver(s may reside in the same household; or 2 the family caregiver may live nearby but not in the same household as the elder. The distance caregiving model involves elders and their family caregivers who live at some distance, defined as more than a 60-minute commute, from one another. Evidence suggests that distance caregiving is a distinct phenomenon, differs substantially from on-site family caregiving, and requires additional assistance to support the physical, social, and contextual dimensions of the caregiving process. Technology-based assists could virtually connect the caregiver and elder and provide strong support that addresses the elder’s physical, social, cognitive, and/or sensory impairments. Therefore, in today’s era of high technology, it is surprising that so few affordable innovations are being marketed for distance caregiving. This article addresses distance caregiving, proposes the use of technology innovation to support caregiving, and suggests a research agenda to better inform policy decisions related to the unique needs of this situation.Keywords: caregiving, family, distance, technology, elders
Maximum permissible voltage of YBCO coated conductors
Wen, J.; Lin, B.; Sheng, J.; Xu, J.; Jin, Z. [Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China); Hong, Z., E-mail: zhiyong.hong@sjtu.edu.cn [Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China); Wang, D.; Zhou, H.; Shen, X.; Shen, C. [Qingpu Power Supply Company, State Grid Shanghai Municipal Electric Power Company, Shanghai (China)
2014-06-15
Highlights: • We examine three kinds of tapes’ maximum permissible voltage. • We examine the relationship between quenching duration and maximum permissible voltage. • Continuous I{sub c} degradations under repetitive quenching where tapes reaching maximum permissible voltage. • The relationship between maximum permissible voltage and resistance, temperature. - Abstract: Superconducting fault current limiter (SFCL) could reduce short circuit currents in electrical power system. One of the most important thing in developing SFCL is to find out the maximum permissible voltage of each limiting element. The maximum permissible voltage is defined as the maximum voltage per unit length at which the YBCO coated conductors (CC) do not suffer from critical current (I{sub c}) degradation or burnout. In this research, the time of quenching process is changed and voltage is raised until the I{sub c} degradation or burnout happens. YBCO coated conductors test in the experiment are from American superconductor (AMSC) and Shanghai Jiao Tong University (SJTU). Along with the quenching duration increasing, the maximum permissible voltage of CC decreases. When quenching duration is 100 ms, the maximum permissible of SJTU CC, 12 mm AMSC CC and 4 mm AMSC CC are 0.72 V/cm, 0.52 V/cm and 1.2 V/cm respectively. Based on the results of samples, the whole length of CCs used in the design of a SFCL can be determined.
Ortiz-León, Gisela N; Kounkel, Marina A; Dzib, Sergio A; Mioduszewski, Amy J; Rodríguez, Luis F; Torres, Rosa M; González-Lópezlira, Rosa A; Pech, Gerardo; Rivera, Juana L; Hartmann, Lee; Boden, Andrew F; Evans, Neal J; Briceño, Cesar; Tobin, John J; Galli, Phillip A B; Gudehus, Donald
2016-01-01
We present the first results of the Gould's Belt Distances Survey (GOBELINS), a project aimed at measuring the proper motion and trigonometric parallax of a large sample of young stars in nearby regions using multi-epoch Very Long Baseline Array (VLBA) radio observations. Enough VLBA detections have now been obtained for 16 stellar systems in Ophiuchus to derive their parallax and proper motion. This leads to distance determinations for individual stars with an accuracy of 0.3 to a few percent. In addition, the orbits of 6 multiple systems were modelled by combining absolute positions with VLBA (and in some cases, near infrared) angular separations. Twelve stellar systems are located in the dark cloud Lynds 1688, the individual distances for this sample are highly consistent with one another, and yield a mean parallax for Lynds 1688 of $\\varpi=7.28\\pm0.06$ mas, corresponding to a distance $d=137.3\\pm1.2$ pc. This represents an accuracy better than 1%. Three systems for which astrometric elements could be meas...
Distance Learning for Special Populations
Bates, Rodger A.
2012-01-01
Distance education strategies for remotely deployed, highly mobile, or institutionalized populations are reviewed and critiqued. Specifically, asynchronous, offline responses for special military units, Native Americans on remote reservations, prison populations and other geographically, temporally or technologically isolated niche populations are…
ECONOMICS OF DISTANCE EDUCATION RECONSIDERED
Wolfram LAASER
2008-07-01
Full Text Available ABSTRACT According to Gartner a certain hype of e-Learning was followed by a downturn but eLearning will continue to be an important factor in learning scenarios. However the economic viability of e-learning projects will be questioned with more scrutiny than in earlier periods. Therefore it seems to be a good opportunity to see what can be learned from past experience in costing distance learning projects and what aspects are added by current attempts to measure economic efficiency. After reviewing early research about costing distance learning some more recent approaches will be discussed, such as eLearning ROI-calculators and the concept of total cost of ownership. Furthermore some microeconomic effects referring to localization of distance learning courses are outlined. Finally several unsolved issues in costing distance education are summarized.
Distance Education in Technological Age
R .C. SHARMA
2005-04-01
Full Text Available Distance Education in Technological AgeRomesh Verma (Editor, New Delhi: Anmol Publications, 2005, ISBN 81-261-2210-2, pp. 419 Reviewed by R C SHARMARegional DirectorIndira Gandhi National Open University-INDIA The advancements in information and communication technologies have brought significant changes in the way the open and distance learning are provided to the learners. The impact of such changes is quite visible in both developed and developing countries. Switching over to online mode, joining hands with private initiatives and making a presence in foreign waters, are some of the hallmarks of the open and distance education (ODE institutions in developing countries. The compilation of twenty six essays on themes as applicable to ODE has resulted in the book, Distance Education in Technological Age. These essays follow a progressive style of narration, starting from describing conceptual framework of distance education, how the distance education was emerged on the global scene and in India, and then goes on to discuss emergence of online distance education and research aspects in ODE. The initial four chapters provide a detailed account of historical development and growth of distance education in India and State Open University and National Open University Model in India . Student support services are pivot to any distance education and much of its success depends on how well the support services are provided. These are discussed from national and international perspective. The issues of collaborative learning, learning on demand, life long learning, learning-unlearning and re-learning model and strategic alliances have also given due space by the authors. An assortment of technologies like communication technology, domestic technology, information technology, mass media and entertainment technology, media technology and educational technology give an idea of how these technologies are being adopted in the open universities. The study
KNOWLEDGE DISTANCE IN INFORMATION SYSTEMS
Yuhua QIAN; Jiye LIANG; Chuangyin DANG; Feng WANG; Wei XU
2007-01-01
In this paper, we first introduce the concepts of knowledge closeness and knowledge distance for measuring the sameness and the difference among knowledge in an information system, respectively.The relationship between these two concepts is a strictly mutual complement relation. We then investigate some important properties of knowledge distance and perform experimental analyses on two public data sets, which show the presented measure appears to be well suited to characterize the nature of knowledge in an information system. Finally, we establish the relationship between the knowledge distance and knowledge granulation, which shows that two variants of the knowledge distance can also be used to construct the knowledge granulation. These results will be helpful for studying uncertainty in information systems.
Graph distance for complex networks
Shimada, Yutaka; Hirata, Yoshito; Ikeguchi, Tohru; Aihara, Kazuyuki
2016-10-01
Networks are widely used as a tool for describing diverse real complex systems and have been successfully applied to many fields. The distance between networks is one of the most fundamental concepts for properly classifying real networks, detecting temporal changes in network structures, and effectively predicting their temporal evolution. However, this distance has rarely been discussed in the theory of complex networks. Here, we propose a graph distance between networks based on a Laplacian matrix that reflects the structural and dynamical properties of networked dynamical systems. Our results indicate that the Laplacian-based graph distance effectively quantifies the structural difference between complex networks. We further show that our approach successfully elucidates the temporal properties underlying temporal networks observed in the context of face-to-face human interactions.
Are contemporary tourists consuming distance?
Larsen, Gunvor Riber
2012. Background The background for this research, which explores how tourists represent distance and whether or not distance can be said to be consumed by contemporary tourists, is the increasing leisure mobility of people. Travelling for the purpose of visiting friends and relatives is increasing...... of understanding mobility at a conceptual level, and distance matters to people's manifest mobility: how they travel and how far they travel are central elements of their movements. Therefore leisure mobility (indeed all mobility) is the activity of relating across distance, either through actual corporeal...... that is an inherent part of manifest mobility. Numerous definitions and conceptualisations of tourism have been discussed over the years, with MacCannell (1976) pioneering studies of tourism and leisure travel through to Lash and Urry's (1994) post tourist and Jansson's (2002) hyper-tourist. These definitions...
Academy Distance Learning Tools (IRIS)
Department of Transportation — IRIS is a suite of front-end web applications utilizing a centralized back-end Oracle database. The system fully supports the FAA Academy's Distance Learning Program...
THE DEVELOPMENT OF DISTANCE EDUCATION IN NIGERIA: Challenges and Prospects
Muyiwa ADEYEMI
2011-01-01
Full Text Available Distance Education as an alternative to the traditional face-to-face education has been seen as the teaching-learning process in which students are separated from the teachers by a physical distance, which is often bridged by modern communication. It comprises all patterns of student-centered learning process in which the teacher has limited role. In Nigeria, Africa, the introduction of this form of learning programme, is relatively new and therefore pose some challenges to all stakeholders in the education industry. In trying to meet up with the enormous demands for formal education, Nigerian government established some institutions for distance learning. These included the National Teachers Institute (NTI, the National Open University (NOUN among others. This paper therefore, examined the historical development of this programme and particularly in Nigeria, the theories and philosophies of distance education, the challenges and prospects of the programme in the country.
Geometrical effects on the airfoil flow separation and transition
Zhang, Wei
2015-04-25
We present results from direct numerical simulations (DNS) of incompressible flow over two airfoils, NACA-4412 and NACA-0012-64, to investigate the effects of the airfoil geometry on the flow separation and transition patterns at Re=104 and 10 degrees incidence. The two chosen airfoils are geometrically similar except for maximum camber (respectively 4%C and 0 with C the chord length), which results in a larger projection area with respect to the incoming flow for the NACA-4412 airfoil, and a larger leeward surface curvature at the leading edge for the NACA-0012-64 airfoil. The governing equations are discretized using an energy conservative fourth-order spatial discretization scheme. An assessment on the two-point correlation indicates that a spanwise domain size of 0.8C is sufficiently large for the present simulations. We discuss flow separation at the airfoil leading edge, transition of the separated shear layer to three-dimensional flow and subsequently to turbulence. Numerical results reveal a stronger adverse pressure gradient field in the leading edge region of the NACA-0012-64 airfoil due to the rapidly varying surface curvature. As a result, the flow experiences detachment at x/C=0.08, and the separated shear layer transition via Kelvin-Helmholtz mechanism occurs at x/C=0.29 with fully developed turbulent flow around x/C=0.80. These flow development phases are delayed to occur at much downstream positions, respectively, observed around x/C=0.25, 0.71 and 1.15 for the NACA-4412 airfoil. The turbulent intensity, measured by the turbulent fluctuations and turbulent Reynolds stresses, are much larger for NACA-0012-64 from the transition onset until the airfoil trailing edge, while turbulence develops significantly downstream of the trailing edge for the NACA-4412 airfoil. For both airfoils, our DNS results indicate that the mean Reynolds stress u\\'u\\'/U02 reaches its maximum value at a distance from the surface approximately equal to the displacement
Distance education: turf and technology.
Pickard, M R
1992-07-01
Distance learning fits with the mission and strategic plan of the University of Texas at Arlington. We believe these educational opportunities in nursing are highly desirable. The Board of Nurse Examiners for the State of Texas has approved this project and the Texas Higher Education Coordinating Board has approved it as a pilot project. The school will continue evaluation and creative problem-solving in the use of distance education.
Categorical perception of tactile distance
Knight, F. L. C.; Longo, M. R.; Bremner, A.J.
2014-01-01
The tactile surface forms a continuous sheet covering the body. And yet, the perceived distance between two touches varies across stimulation sites. Perceived tactile distance is larger when stimuli cross over the wrist, compared to when both fall on either the hand or the forearm. This effect could reflect a categorical distortion of tactile space across body-part boundaries (in which stimuli crossing the wrist boundary are perceptually elongated) or may simply reflect a localised increased ...
Jan Werner; Eva Maria Griebeler
2014-01-01
We tested if growth rates of recent taxa are unequivocally separated between endotherms and ectotherms, and compared these to dinosaurian growth rates. We therefore performed linear regression analyses on the log-transformed maximum growth rate against log-transformed body mass at maximum growth for extant altricial birds, precocial birds, eutherians, marsupials, reptiles, fishes and dinosaurs. Regression models of precocial birds (and fishes) strongly differed from Case's study (1978), which...
Generalised maximum entropy and heterogeneous technologies
Oude Lansink, A.G.J.M.
1999-01-01
Generalised maximum entropy methods are used to estimate a dual model of production on panel data of Dutch cash crop farms over the period 1970-1992. The generalised maximum entropy approach allows a coherent system of input demand and output supply equations to be estimated for each farm in the sam
20 CFR 229.48 - Family maximum.
2010-04-01
... month on one person's earnings record is limited. This limited amount is called the family maximum. The family maximum used to adjust the social security overall minimum rate is based on the employee's Overall..., when any of the persons entitled to benefits on the insured individual's compensation would, except...
The maximum rotation of a galactic disc
Bottema, R
1997-01-01
The observed stellar velocity dispersions of galactic discs show that the maximum rotation of a disc is on average 63% of the observed maximum rotation. This criterion can, however, not be applied to small or low surface brightness (LSB) galaxies because such systems show, in general, a continuously
Farooq, Muhammad U.; Al Asmari, AbdulRahman; Javid, Choudhary Z.
2012-01-01
Technology-based initiatives have transformed the process of teaching and learning activities at formal institutions generally and distance education institutions particularly. Distance education is at the heart of the digital age making maximum use of the emerging technologies. Researchers have favoured computer mediated communications (CMC) for…
Single Wave Overtopping Volumes and their Travel Distance for Rubble Mound Breakwaters
Andersen, Thomas Lykke; Burcharth, Hans F.; Gironella, F. X.
2009-01-01
In the present paper small and large scale overtopping data for rubble mound structures have been analysed with respect to single wave overtopping volumes and their travel distance. The analysis has led to formulae for estimation of maximum single wave overtopping volumes and their travel distance...
Categorical perception of tactile distance.
Knight, Frances Le Cornu; Longo, Matthew R; Bremner, Andrew J
2014-05-01
The tactile surface forms a continuous sheet covering the body. And yet, the perceived distance between two touches varies across stimulation sites. Perceived tactile distance is larger when stimuli cross over the wrist, compared to when both fall on either the hand or the forearm. This effect could reflect a categorical distortion of tactile space across body-part boundaries (in which stimuli crossing the wrist boundary are perceptually elongated) or may simply reflect a localised increased in acuity surrounding anatomical landmarks (in which stimuli near the wrist are perceptually elongated). We tested these two interpretations across two experiments, by comparing a well-documented bias to perceive mediolateral tactile distances across the forearm/hand as larger than proximodistal ones along the forearm/hand at three different sites (hand, wrist, and forearm). According to the 'categorical' interpretation, tactile distances should be elongated selectively in the proximodistal axis thus reducing the anisotropy. According to the 'localised acuity' interpretation, distances will be perceptually elongated in the vicinity of the wrist regardless of orientation, leading to increased overall size without affecting anisotropy. Consistent with the categorical account, we found a reduction in the magnitude of anisotropy at the wrist, with no evidence of a corresponding localised increase in precision. These findings demonstrate that we reference touch to a representation of the body that is categorically segmented into discrete parts, which consequently influences the perception of tactile distance.
Separation anxiety in children
... page: //medlineplus.gov/ency/article/001542.htm Separation anxiety in children To use the sharing features on this page, please enable JavaScript. Separation anxiety in children is a developmental stage in which ...
Ionene membrane battery separator
Moacanin, J.; Tom, H. Y.
1969-01-01
Ionic transport characteristics of ionenes, insoluble membranes from soluble polyelectrolyte compositions, are studied for possible application in a battery separator. Effectiveness of the thin film of separator membrane essentially determines battery lifetime.
Nath, Pulak; Twary, Scott N.
2016-04-26
Described herein are methods and systems for harvesting, collecting, separating and/or dewatering algae using iron based salts combined with a magnetic field gradient to separate algae from an aqueous solution.
Boundary condition effects on maximum groundwater withdrawal in coastal aquifers.
Lu, Chunhui; Chen, Yiming; Luo, Jian
2012-01-01
Prevention of sea water intrusion in coastal aquifers subject to groundwater withdrawal requires optimization of well pumping rates to maximize the water supply while avoiding sea water intrusion. Boundary conditions and the aquifer domain size have significant influences on simulating flow and concentration fields and estimating maximum pumping rates. In this study, an analytical solution is derived based on the potential-flow theory for evaluating maximum groundwater pumping rates in a domain with a constant hydraulic head landward boundary. An empirical correction factor, which was introduced by Pool and Carrera (2011) to account for mixing in the case with a constant recharge rate boundary condition, is found also applicable for the case with a constant hydraulic head boundary condition, and therefore greatly improves the usefulness of the sharp-interface analytical solution. Comparing with the solution for a constant recharge rate boundary, we find that a constant hydraulic head boundary often yields larger estimations of the maximum pumping rate and when the domain size is five times greater than the distance between the well and the coastline, the effect of setting different landward boundary conditions becomes insignificant with a relative difference between two solutions less than 2.5%. These findings can serve as a preliminary guidance for conducting numerical simulations and designing tank-scale laboratory experiments for studying groundwater withdrawal problems in coastal aquifers with minimized boundary condition effects.
Separation and confirmation of showers
Neslušan, L.; Hajduková, M.
2017-01-01
Aims: Using IAU MDC photographic, IAU MDC CAMS video, SonotaCo video, and EDMOND video databases, we aim to separate all provable annual meteor showers from each of these databases. We intend to reveal the problems inherent in this procedure and answer the question whether the databases are complete and the methods of separation used are reliable. We aim to evaluate the statistical significance of each separated shower. In this respect, we intend to give a list of reliably separated showers rather than a list of the maximum possible number of showers. Methods: To separate the showers, we simultaneously used two methods. The use of two methods enables us to compare their results, and this can indicate the reliability of the methods. To evaluate the statistical significance, we suggest a new method based on the ideas of the break-point method. Results: We give a compilation of the showers from all four databases using both methods. Using the first (second) method, we separated 107 (133) showers, which are in at least one of the databases used. These relatively low numbers are a consequence of discarding any candidate shower with a poor statistical significance. Most of the separated showers were identified as meteor showers from the IAU MDC list of all showers. Many of them were identified as several of the showers in the list. This proves that many showers have been named multiple times with different names. Conclusions: At present, a prevailing share of existing annual showers can be found in the data and confirmed when we use a combination of results from large databases. However, to gain a complete list of showers, we need more-complete meteor databases than the most extensive databases currently are. We also still need a more sophisticated method to separate showers and evaluate their statistical significance. Tables A.1 and A.2 are also available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (http://130.79.128.5) or via http://cdsarc
Van Kooy, L.; Mooij, M.; Rem, P.
2004-01-01
Separations by density, such as the separation of non-ferrous scrap into light and heavy alloys, are often realized by means of heavy media. In principle, kinetic gravity separations in water can be faster and cheaper, because they do not rely on suspensions or salt solutions of which the density
Hierarchical Maximum Margin Learning for Multi-Class Classification
Yang, Jian-Bo
2012-01-01
Due to myriads of classes, designing accurate and efficient classifiers becomes very challenging for multi-class classification. Recent research has shown that class structure learning can greatly facilitate multi-class learning. In this paper, we propose a novel method to learn the class structure for multi-class classification problems. The class structure is assumed to be a binary hierarchical tree. To learn such a tree, we propose a maximum separating margin method to determine the child nodes of any internal node. The proposed method ensures that two classgroups represented by any two sibling nodes are most separable. In the experiments, we evaluate the accuracy and efficiency of the proposed method over other multi-class classification methods on real world large-scale problems. The results show that the proposed method outperforms benchmark methods in terms of accuracy for most datasets and performs comparably with other class structure learning methods in terms of efficiency for all datasets.
Center—Distance Continuous Probability Models and the Distance Measure
郑方; 吴文虎; 等
1998-01-01
In this paper,a new statistic model named Center-Distance Continuous Probability Model(CDCPM)for speech recognition is described,which is based on Center-Distance Normal(CDN)distribution.In a CDCPM,the probability transition matrix is omitted,and the observation probability density function(PDF)in each state is in the form of embedded multiple-model(EMM)based on the Nearest Neighbour rule.The experimental results on two giant real-world Chinese speech databases and a real-world continuous-manner 2000 phrase system show that this model is a powerful one.Also,a distance measure for CDPMs is proposed which is based on the Bayesian minimum classification error(MCE) discrimination.
The inverse maximum flow problem with lower and upper bounds for the flow
Deaconu Adrian
2008-01-01
Full Text Available The general inverse maximum flow problem (denoted GIMF is considered, where lower and upper bounds for the flow are changed so that a given feasible flow becomes a maximum flow and the distance (considering l1 norm between the initial vector of bounds and the modified vector is minimum. Strongly and weakly polynomial algorithms for solving this problem are proposed. In the paper it is also proved that the inverse maximum flow problem where only the upper bound for the flow is changed (IMF is a particular case of the GIMF problem.
Automatic Classification of Protein Structure Using the Maximum Contact Map Overlap Metric
Andonov, R.; Djidjev, H.; Klau, G.W.; Le Boudic-Jamin, M.; Wohlers, I.
2015-01-01
In this work, we propose a new distance measure for comparing two protein structures based on their contact map representations. We show that our novel measure, which we refer to as the maximum contact map overlap (max-CMO) metric, satisfies all properties of a metric on the space of protein represe
Trautmann, N
1976-01-01
A survey is given on the progress of fast chemical separation procedures during the last few years. Fast, discontinuous separation techniques are illustrated by a procedure for niobium. The use of such techniques for the chemical characterization of the heaviest known elements is described. Other rapid separation methods from aqueous solutions are summarized. The application of the high speed liquid chromatography to the separation of chemically similar elements is outlined. The use of the gas jet recoil transport method for nuclear reaction products and its combination with a continuous solvent extraction technique and with a thermochromatographic separation is presented. Different separation methods in the gas phase are briefly discussed and the attachment of a thermochromatographic technique to an on-line mass separator is shown. (45 refs).
Acoustofluidic bacteria separation
Li, Sixing; Ma, Fen; Bachman, Hunter; Cameron, Craig E.; Zeng, Xiangqun; Huang, Tony Jun
2017-01-01
Bacterial separation from human blood samples can help with the identification of pathogenic bacteria for sepsis diagnosis. In this work, we report an acoustofluidic device for label-free bacterial separation from human blood samples. In particular, we exploit the acoustic radiation force generated from a tilted-angle standing surface acoustic wave (taSSAW) field to separate Escherichia coli from human blood cells based on their size difference. Flow cytometry analysis of the E. coli separated from red blood cells shows a purity of more than 96%. Moreover, the label-free electrochemical detection of the separated E. coli displays reduced non-specific signals due to the removal of blood cells. Our acoustofluidic bacterial separation platform has advantages such as label-free separation, high biocompatibility, flexibility, low cost, miniaturization, automation, and ease of in-line integration. The platform can be incorporated with an on-chip sensor to realize a point-of-care sepsis diagnostic device.
Conceptualizing Educational Research in Distance Education.
Watkins, Ryan; Schlosser, Charles
2003-01-01
Suggests a starting place for formal inquiry into distance education. Topics covered include: background on educational research and research on distance education; research paradigms that are applicable to distance education; subsystems of a distance education program; and a matrix for conceptualizing distance education research. (MES)
Computing Distances between Probabilistic Automata
Mathieu Tracol
2011-07-01
Full Text Available We present relaxed notions of simulation and bisimulation on Probabilistic Automata (PA, that allow some error epsilon. When epsilon is zero we retrieve the usual notions of bisimulation and simulation on PAs. We give logical characterisations of these notions by choosing suitable logics which differ from the elementary ones, L with negation and L without negation, by the modal operator. Using flow networks, we show how to compute the relations in PTIME. This allows the definition of an efficiently computable non-discounted distance between the states of a PA. A natural modification of this distance is introduced, to obtain a discounted distance, which weakens the influence of long term transitions. We compare our notions of distance to others previously defined and illustrate our approach on various examples. We also show that our distance is not expansive with respect to process algebra operators. Although L without negation is a suitable logic to characterise epsilon-(bisimulation on deterministic PAs, it is not for general PAs; interestingly, we prove that it does characterise weaker notions, called a priori epsilon-(bisimulation, which we prove to be NP-difficult to decide.
Distance sampling methods and applications
Buckland, S T; Marques, T A; Oedekoven, C S
2015-01-01
In this book, the authors cover the basic methods and advances within distance sampling that are most valuable to practitioners and in ecology more broadly. This is the fourth book dedicated to distance sampling. In the decade since the last book published, there have been a number of new developments. The intervening years have also shown which advances are of most use. This self-contained book covers topics from the previous publications, while also including recent developments in method, software and application. Distance sampling refers to a suite of methods, including line and point transect sampling, in which animal density or abundance is estimated from a sample of distances to detected individuals. The book illustrates these methods through case studies; data sets and computer code are supplied to readers through the book’s accompanying website. Some of the case studies use the software Distance, while others use R code. The book is in three parts. The first part addresses basic methods, the ...
Individual differences in distance perception.
Jackson, Russell E
2009-05-07
Distance perception is among the most pervasive mental phenomena and the oldest research topics in behavioural science. However, we do not understand well the most pervasive finding of distance perception research, that of large individual differences. There are large individual differences in acrophobia (fear of heights), which we commonly assume consists of an abnormal fear of stimuli perceived normally. Evolved navigation theory (ENT) instead suggests that acrophobia consists of a more normal fear of stimuli perceived abnormally. ENT suggests that distance perception individual differences produce major components of acrophobia. Acrophobia tested over a broad range in the present study predicted large individual differences in distance estimation of surfaces that could produce falls. This fear of heights correlated positively with distance estimates of a vertical surface-even among non-acrophobic individuals at no risk of falling and without knowledge of being tested for acrophobia. Acrophobia score predicted magnitude of the descent illusion, which is thought to reflect the risk of falling. These data hold important implications in environmental navigation, clinical aetiology and the evolution of visual systems.
ICT USAGE BY DISTANCE LEARNERS IN INDIA
Ashish Kumar AWADHIYA
2014-07-01
Full Text Available Open Universities across the world are embracing ICT based teaching and learning process to disseminate quality education to their learners spread across the globe. In India availability and access of ICT and learner characteristics are uneven and vary from state to state. Hence it is important to establish the facts about ICT access among learners, their ICT usage patterns and their readiness to use ICT for educational purpose. In view of this, a study was conducted with the objective to find out the access level of ICT among distance learners. The analysis indicates that maximum learners have desktop/laptops and most of them are accessing internet very frequently from their home. The analysis also indicates that maximum respondents are browsing social networking sites followed by educational and e-mail service providing websites. Findings suggest that there is a need to generate ICT based tutorials complemented with social networking tools and mobile applications. Study also shows that learners are equipped with mobile phones and they are browsing internet through it and also availing support services offered by the university. Hence possibility of integrating mobile phone services may be used for providing learner support services and content delivery.
A dual method for maximum entropy restoration
Smith, C. B.
1979-01-01
A simple iterative dual algorithm for maximum entropy image restoration is presented. The dual algorithm involves fewer parameters than conventional minimization in the image space. Minicomputer test results for Fourier synthesis with inadequate phantom data are given.
Maximum Throughput in Multiple-Antenna Systems
Zamani, Mahdi
2012-01-01
The point-to-point multiple-antenna channel is investigated in uncorrelated block fading environment with Rayleigh distribution. The maximum throughput and maximum expected-rate of this channel are derived under the assumption that the transmitter is oblivious to the channel state information (CSI), however, the receiver has perfect CSI. First, we prove that in multiple-input single-output (MISO) channels, the optimum transmission strategy maximizing the throughput is to use all available antennas and perform equal power allocation with uncorrelated signals. Furthermore, to increase the expected-rate, multi-layer coding is applied. Analogously, we establish that sending uncorrelated signals and performing equal power allocation across all available antennas at each layer is optimum. A closed form expression for the maximum continuous-layer expected-rate of MISO channels is also obtained. Moreover, we investigate multiple-input multiple-output (MIMO) channels, and formulate the maximum throughput in the asympt...
Photoemission spectromicroscopy with MAXIMUM at Wisconsin
Ng, W.; Ray-Chaudhuri, A.K.; Cole, R.K.; Wallace, J.; Crossley, S.; Crossley, D.; Chen, G.; Green, M.; Guo, J.; Hansen, R.W.C.; Cerrina, F.; Margaritondo, G. (Dept. of Electrical Engineering, Dept. of Physics and Synchrotron Radiation Center, Univ. of Wisconsin, Madison (USA)); Underwood, J.H.; Korthright, J.; Perera, R.C.C. (Center for X-ray Optics, Accelerator and Fusion Research Div., Lawrence Berkeley Lab., CA (USA))
1990-06-01
We describe the development of the scanning photoemission spectromicroscope MAXIMUM at the Wisoncsin Synchrotron Radiation Center, which uses radiation from a 30-period undulator. The article includes a discussion of the first tests after the initial commissioning. (orig.).
Maximum-likelihood method in quantum estimation
Paris, M G A; Sacchi, M F
2001-01-01
The maximum-likelihood method for quantum estimation is reviewed and applied to the reconstruction of density matrix of spin and radiation as well as to the determination of several parameters of interest in quantum optics.
Asymmetric distances for binary embeddings.
Gordo, Albert; Perronnin, Florent; Gong, Yunchao; Lazebnik, Svetlana
2014-01-01
In large-scale query-by-example retrieval, embedding image signatures in a binary space offers two benefits: data compression and search efficiency. While most embedding algorithms binarize both query and database signatures, it has been noted that this is not strictly a requirement. Indeed, asymmetric schemes that binarize the database signatures but not the query still enjoy the same two benefits but may provide superior accuracy. In this work, we propose two general asymmetric distances that are applicable to a wide variety of embedding techniques including locality sensitive hashing (LSH), locality sensitive binary codes (LSBC), spectral hashing (SH), PCA embedding (PCAE), PCAE with random rotations (PCAE-RR), and PCAE with iterative quantization (PCAE-ITQ). We experiment on four public benchmarks containing up to 1M images and show that the proposed asymmetric distances consistently lead to large improvements over the symmetric Hamming distance for all binary embedding techniques.
Euclidean distance geometry an introduction
Liberti, Leo
2017-01-01
This textbook, the first of its kind, presents the fundamentals of distance geometry: theory, useful methodologies for obtaining solutions, and real world applications. Concise proofs are given and step-by-step algorithms for solving fundamental problems efficiently and precisely are presented in Mathematica®, enabling the reader to experiment with concepts and methods as they are introduced. Descriptive graphics, examples, and problems, accompany the real gems of the text, namely the applications in visualization of graphs, localization of sensor networks, protein conformation from distance data, clock synchronization protocols, robotics, and control of unmanned underwater vehicles, to name several. Aimed at intermediate undergraduates, beginning graduate students, researchers, and practitioners, the reader with a basic knowledge of linear algebra will gain an understanding of the basic theories of distance geometry and why they work in real life.
Virtual bioinformatics distance learning suite*.
Tolvanen, Martti; Vihinen, Mauno
2004-05-01
Distance learning as a computer-aided concept allows students to take courses from anywhere at any time. In bioinformatics, computers are needed to collect, store, process, and analyze massive amounts of biological and biomedical data. We have applied the concept of distance learning in virtual bioinformatics to provide university course material over the Internet. Currently, we provide two fully computer-based courses, "Introduction to Bioinformatics" and "Bioinformatics in Functional Genomics." Here we will discuss the application of distance learning in bioinformatics training and our experiences gained during the 3 years that we have run the courses, with about 400 students from a number of universities. The courses are available at bioinf.uta.fi.
The Distance Geometry of Music
Demaine, Erik D; Meijer, Henk; Rappaport, David; Taslakian, Perouz; Toussaint, Godfried T; Winograd, Terry; Wood, David R
2007-01-01
We demonstrate relationships between the classic Euclidean algorithm and many other fields of study, particularly in the context of music and distance geometry. Specifically, we show how the structure of the Euclidean algorithm defines a family of rhythms which encompass over forty timelines (\\emph{ostinatos}) from traditional world music. We prove that these \\emph{Euclidean rhythms} have the mathematical property that their onset patterns are distributed as evenly as possible: they maximize the sum of the Euclidean distances between all pairs of onsets, viewing onsets as points on a circle. Indeed, Euclidean rhythms are the unique rhythms that maximize this notion of \\emph{evenness}. We also show that essentially all Euclidean rhythms are \\emph{deep}: each distinct distance between onsets occurs with a unique multiplicity, and these multiplicies form an interval $1,2,...,k-1$. Finally, we characterize all deep rhythms, showing that they form a subclass of generated rhythms, which in turn proves a useful prop...
The maximum entropy technique. System's statistical description
Belashev, B Z
2002-01-01
The maximum entropy technique (MENT) is applied for searching the distribution functions of physical values. MENT takes into consideration the demand of maximum entropy, the characteristics of the system and the connection conditions, naturally. It is allowed to apply MENT for statistical description of closed and open systems. The examples in which MENT had been used for the description of the equilibrium and nonequilibrium states and the states far from the thermodynamical equilibrium are considered
19 CFR 114.23 - Maximum period.
2010-04-01
... 19 Customs Duties 1 2010-04-01 2010-04-01 false Maximum period. 114.23 Section 114.23 Customs... CARNETS Processing of Carnets § 114.23 Maximum period. (a) A.T.A. carnet. No A.T.A. carnet with a period of validity exceeding 1 year from date of issue shall be accepted. This period of validity cannot be...
Maximum-Likelihood Detection Of Noncoherent CPM
Divsalar, Dariush; Simon, Marvin K.
1993-01-01
Simplified detectors proposed for use in maximum-likelihood-sequence detection of symbols in alphabet of size M transmitted by uncoded, full-response continuous phase modulation over radio channel with additive white Gaussian noise. Structures of receivers derived from particular interpretation of maximum-likelihood metrics. Receivers include front ends, structures of which depends only on M, analogous to those in receivers of coherent CPM. Parts of receivers following front ends have structures, complexity of which would depend on N.
Maximum tunneling velocities in symmetric double well potentials
Manz, Jörn [State Key Laboratory of Quantum Optics and Quantum Optics Devices, Institute of Laser Spectroscopy, Shanxi University, 92, Wucheng Road, Taiyuan 030006 (China); Institut für Chemie und Biochemie, Freie Universität Berlin, Takustr. 3, 14195 Berlin (Germany); Schild, Axel [Institut für Chemie und Biochemie, Freie Universität Berlin, Takustr. 3, 14195 Berlin (Germany); Schmidt, Burkhard, E-mail: burkhard.schmidt@fu-berlin.de [Institut für Mathematik, Freie Universität Berlin, Arnimallee 6, 14195 Berlin (Germany); Yang, Yonggang, E-mail: ygyang@sxu.edu.cn [State Key Laboratory of Quantum Optics and Quantum Optics Devices, Institute of Laser Spectroscopy, Shanxi University, 92, Wucheng Road, Taiyuan 030006 (China)
2014-10-17
Highlights: • Coherent tunneling in one-dimensional symmetric double well potentials. • Potentials for analytical estimates in the deep tunneling regime. • Maximum velocities scale as the square root of the ratio of barrier height and mass. • In chemical physics maximum tunneling velocities are in the order of a few km/s. - Abstract: We consider coherent tunneling of one-dimensional model systems in non-cyclic or cyclic symmetric double well potentials. Generic potentials are constructed which allow for analytical estimates of the quantum dynamics in the non-relativistic deep tunneling regime, in terms of the tunneling distance, barrier height and mass (or moment of inertia). For cyclic systems, the results may be scaled to agree well with periodic potentials for which semi-analytical results in terms of Mathieu functions exist. Starting from a wavepacket which is initially localized in one of the potential wells, the subsequent periodic tunneling is associated with tunneling velocities. These velocities (or angular velocities) are evaluated as the ratio of the flux densities versus the probability densities. The maximum velocities are found under the top of the barrier where they scale as the square root of the ratio of barrier height and mass (or moment of inertia), independent of the tunneling distance. They are applied exemplarily to several prototypical molecular models of non-cyclic and cyclic tunneling, including ammonia inversion, Cope rearrangement of semibullvalene, torsions of molecular fragments, and rotational tunneling in strong laser fields. Typical maximum velocities and angular velocities are in the order of a few km/s and from 10 to 100 THz for our non-cyclic and cyclic systems, respectively, much faster than time-averaged velocities. Even for the more extreme case of an electron tunneling through a barrier of height of one Hartree, the velocity is only about one percent of the speed of light. Estimates of the corresponding time scales for
Adaptive Distance Protection for Microgrids
Lin, Hengwei; Guerrero, Josep M.; Quintero, Juan Carlos Vasquez
2015-01-01
Due to the increasing penetration of distributed generation resources, more and more microgrids can be found in distribution systems. This paper proposes a phasor measurement unit based distance protection strategy for microgrids in distribution system. At the same time, transfer tripping scheme...... is adopted to accelerate the tripping speed of the relays on the weak lines. The protection methodology is tested on a mid-voltage microgrid network in Aalborg, Denmark. The results show that the adaptive distance protection methodology has good selectivity and sensitivity. What is more, this system also has...
Hutchinson, Thomas H. [Plymouth Marine Laboratory, Prospect Place, The Hoe, Plymouth PL1 3DH (United Kingdom)], E-mail: thom1@pml.ac.uk; Boegi, Christian [BASF SE, Product Safety, GUP/PA, Z470, 67056 Ludwigshafen (Germany); Winter, Matthew J. [AstraZeneca Safety, Health and Environment, Brixham Environmental Laboratory, Devon TQ5 8BA (United Kingdom); Owens, J. Willie [The Procter and Gamble Company, Central Product Safety, 11810 East Miami River Road, Cincinnati, OH 45252 (United States)
2009-02-19
There is increasing recognition of the need to identify specific sublethal effects of chemicals, such as reproductive toxicity, and specific modes of actions of the chemicals, such as interference with the endocrine system. To achieve these aims requires criteria which provide a basis to interpret study findings so as to separate these specific toxicities and modes of action from not only acute lethality per se but also from severe inanition and malaise that non-specifically compromise reproductive capacity and the response of endocrine endpoints. Mammalian toxicologists have recognized that very high dose levels are sometimes required to elicit both specific adverse effects and present the potential of non-specific 'systemic toxicity'. Mammalian toxicologists have developed the concept of a maximum tolerated dose (MTD) beyond which a specific toxicity or action cannot be attributed to a test substance due to the compromised state of the organism. Ecotoxicologists are now confronted by a similar challenge and must develop an analogous concept of a MTD and the respective criteria. As examples of this conundrum, we note recent developments in efforts to validate protocols for fish reproductive toxicity and endocrine screens (e.g. some chemicals originally selected as 'negatives' elicited decreases in fecundity or changes in endpoints intended to be biomarkers for endocrine modes of action). Unless analogous criteria can be developed, the potentially confounding effects of systemic toxicity may then undermine the reliable assessment of specific reproductive effects or biomarkers such as vitellogenin or spiggin. The same issue confronts other areas of aquatic toxicology (e.g., genotoxicity) and the use of aquatic animals for preclinical assessments of drugs (e.g., use of zebrafish for drug safety assessment). We propose that there are benefits to adopting the concept of an MTD for toxicology and pharmacology studies using fish and other aquatic
Fast Exact Euclidean Distance (FEED) Transformation
Schouten, Theo; Broek, van den Egon; Kittler, J.; Petrou, M.; Nixon, M.
2004-01-01
Fast Exact Euclidean Distance (FEED) transformation is introduced, starting from the inverse of the distance transformation. The prohibitive computational cost of a naive implementation of traditional Euclidean Distance Transformation, is tackled by three operations: restriction of both the number o
[Separation anxiety in children].
Purper-Ouakil, Diane; Franc, Nathalie
2010-06-20
Separation anxiety disorder can be differentiated from developmental anxiety because of its intensity, persistence and negative impact on adaptive functioning. This disorder is closely linked to other anxiety and mood disorders and can also be associated with externalizing psychopathology in children and adolescents. Severe separation anxiety can result in school refusal and intra-familial violence. Cognitive behavioral therapies have the best evidence-based support for the treatment of separation anxiety disorder in children and adolescents. In addition, it is important to detect factors associated with persistence of anxiety such as systematic avoidance of separation and parental overprotection. The role of pediatricians and general practitioners in recognizing clinical separation anxiety and encouraging appropriate care and positive parental attitudes is essential, as separation anxiety is often associated with a variety of somatic symptoms.
Distance Based Method for Outlier Detection of Body Sensor Networks
Haibin Zhang
2016-01-01
Full Text Available We propose a distance based method for the outlier detection of body sensor networks. Firstly, we use a Kernel Density Estimation (KDE to calculate the probability of the distance to k nearest neighbors for diagnosed data. If the probability is less than a threshold, and the distance of this data to its left and right neighbors is greater than a pre-defined value, the diagnosed data is decided as an outlier. Further, we formalize a sliding window based method to improve the outlier detection performance. Finally, to estimate the KDE by training sensor readings with errors, we introduce a Hidden Markov Model (HMM based method to estimate the most probable ground truth values which have the maximum probability to produce the training data. Simulation results show that the proposed method possesses a good detection accuracy with a low false alarm rate.
[Separation anxiety. Theoretical considerations].
Blandin, N; Parquet, P J; Bailly, D
1994-01-01
The interest in separation anxiety is nowadays increasing: this disorder appearing during childhood may predispose to the occurrence of anxiety disorders (such as panic disorder and agoraphobia) and major depression into adulthood. Psychoanalytic theories differ on the nature of separation anxiety and its place in child development. For some authors, separation anxiety must be understood as resulting from the unconscious internal conflicts inherent in the individuation process and gradual attainment of autonomy. From this point of view, the fear of loss of mother by separation is not regarded as resulting from a real danger. However, Freud considers the primary experience of separation from protecting mother as the prototype situation of anxiety and compares the situations generating fear to separation experiences. For him, anxiety originates from two factors: the physiological fact is initiated at the time of birth but the primary traumatic situation is the separation from mother. This point of view may be compared with behavioral theories. Behavioral theories suggest that separation anxiety may be conditioned or learned from innate fears. In Freud's theory, the primary situation of anxiety resulting from the separation from mother plays a role comparable to innate fears. Grappling with the problem of separation anxiety, Bowlby emphasizes then the importance of the child's attachment to one person (mother or primary caregiver) and the fact that this attachment is instinctive. This point of view, based on the watch of infants, is akin to ethological theories on behaviour of non human primates. Bowlby especially shows that the reactions of infant separated from mother evolve on three stages: the phase of protestation which may constitute the prototype of adulthood anxiety, the phase of desperation which may be the prototype of depression, and the phase of detachment. He emphasizes so the role of early separations in the development of vulnerability to depression
Roof separation characteristics of laminated weak roof strata of longwall roadway
LU Ting-kan; LIU Yu-zhou
2004-01-01
The roof separation was investigated in a coal mine as part of the site characterization of roof strata deterioration in a longwall roadway. The separation of laminated,weak roof strata was initially characterized as the maximum separation, effect of geological setting on separation and the effect of mining activities (heading development,time-dependent and longwall extraction) on separation. Then the separation process was studied, so as to answer the questions of: when the separation occurs; where the separation is located and what geological setting it relates to; how large of the separation is; and how the separation propagates.
Chang, Paul K
2014-01-01
Interdisciplinary and Advanced Topics in Science and Engineering, Volume 3: Separation of Flow presents the problem of the separation of fluid flow. This book provides information covering the fields of basic physical processes, analyses, and experiments concerning flow separation.Organized into 12 chapters, this volume begins with an overview of the flow separation on the body surface as discusses in various classical examples. This text then examines the analytical and experimental results of the laminar boundary layer of steady, two-dimensional flows in the subsonic speed range. Other chapt
The Future of Distance Education.
Saba, Farhad
2000-01-01
Examines factors that will influence how distance education is practiced in the first few decades of this new century. Discusses developments in digital technology; the exponential growth of knowledge about the brain, as well as physiology, chemistry, and psychology of learning; the system relationship between individual learners and instructors;…
Using Podcasts in Distance Education
Koppelman, Herman
2013-01-01
This paper discusses three possible ways of applying podcasts in distance education: podcasts of recordings of virtual classes, podcasts produced for specific pedagogical aims, and podcasts produced by external organizations. Through a survey we gained insight in the (until now limited) experiences of our distant students with podcasts, and also…
Distance Education Instructional Model Applications.
Jackman, Diane H.; Swan, Michael K.
1995-01-01
A survey of graduate students involved in distance education on North Dakota State University's Interactive Video Network included 80 on campus and 13 off. The instructional models rated most effective were role playing, simulation, jurisprudential (Socratic method), memorization, synectics, and inquiry. Direct instruction was rated least…
Distance, Lending Relationships, and Competition
Degryse, H.A.; Ongena, S.
2003-01-01
A recent string of theoretical papers has highlighted the importance of geographical distance in explaining loan rates for small firms.Lenders located in the vicinity of small firms face significantly lower transportation and monitoring costs, and hence wield considerable market power, if competing
Lessons in Developing Distance Learning.
Gant, Lenora Peters
1996-01-01
Describes the use of video teletraining (VTT) for distance learning in the Department of Defense. Topics include planning and organizing the VTT facility, staff development, site facilitators, the necessity of protocol, instructional design and development strategies, student involvement and interactivity, and evaluation and assessment. (LRW)
Communication Barriers in Distance Education
Isman, Aytekin; Dabaj, Fahme; Altinay, Fahriye; Altinay, Zehra
2003-01-01
Communication is a key concept as being the major tool for people in order to satisfy their needs. It is an activity which refers as process and effective communication requires qualified communication with the elimination of communication barriers. As it is known, distance education is a new trend by following contemporary facilities and tools…
Distance Learning: Untried and Untrue
Halfond, Jay A.
2010-01-01
G. K. Chesterton famously once said: "Christianity has not been tried and found wanting; it has been found difficult and not tried." This, the author believes, applies to distance learning as well. There is far too much self-congratulatory hyperbole about the growth and pervasiveness of online learning--which exaggerates reality and overlooks the…
Curriculum Control in Distance Education.
Chesterton, Paul
1985-01-01
The nature of distance education is to shift the locus of curriculum control toward the institution and its staff and away from the students. This imposes a responsibility on the institution to examine and evaluate the values and assumptions underlying the decision-making and the implications of the patterns of control that emerge. (Author/MSE)
Distance, Lending Relationships and Competition
Degryse, H.A.; Ongena, S.
2002-01-01
A recent string of theoretical papers highlights the importance of geographical distance in explaining pricing and availability of loans to small firms.Lenders located in the vicinity of small firms have significantly lower monitoring and transaction costs, and hence considerable market power if com
Video Surveillance using Distance Maps
Schouten, Theo E.; Kuppens, Harco C.; Broek, van den Egon L.; Kehtarnavaz, Nasser; Laplante, Phillip A.
2006-01-01
Human vigilance is limited; hence, automatic motion and distance detection is one of the central issues in video surveillance. Hereby, many aspects are of importance, this paper specially addresses: efficiency, achieving real-time performance, accuracy, and robustness against various noise factors.
Gesture Interaction at a Distance
Fikkert, F.W.
2010-01-01
The aim of this work is to explore, from a perspective of human behavior, which gestures are suited to control large display surfaces from a short distance away; why that is so; and, equally important, how such an interface can be made a reality. A well-known example of the type of interface that is
The Perception of Ideological Distance
Granberg, Donald; Brown, Thad A.
1992-01-01
Data from national election studies in Britain, the Netherlands, Sweden, and the U.S. were analyzed to test hypotheses concerning the perception of ideological distance between parties and candidates. The first hypothesis, derived from Sherif's social judgment theory and Heider's balance theory, was
Isolation by distance, web service
Bohonak Andrew J
2005-03-01
Full Text Available Abstract Background The population genetic pattern known as "isolation by distance" results from spatially limited gene flow and is a commonly observed phenomenon in natural populations. However, few software programs exist for estimating the degree of isolation by distance among populations, and they tend not to be user-friendly. Results We have created Isolation by Distance Web Service (IBDWS a user-friendly web interface for determining patterns of isolation by distance. Using this site, population geneticists can perform a variety of powerful statistical tests including Mantel tests, Reduced Major Axis (RMA regression analysis, as well as calculate FST between all pairs of populations and perform basic summary statistics (e.g., heterozygosity. All statistical results, including publication-quality scatter plots in Postscript format, are returned rapidly to the user and can be easily downloaded. Conclusion IBDWS population genetics analysis software is hosted at http://phage.sdsu.edu/~jensen/ and documentation is available at http://www.bio.sdsu.edu/pub/andy/IBD.html. The source code has been made available on Source Forge at http://sourceforge.net/projects/ibdws/.
Video surveillance using distance maps
Schouten, Theo E.; Kuppens, Harco C.; van den Broek, Egon; Kehtarnavaz, Nasser; Laplante, Phillip A,
2006-01-01
Human vigilance is limited; hence, automatic motion and distance detection is one of the central issues in video surveillance. Hereby, many aspects are of importance, this paper specially addresses: efficiency, achieving real-time performance, accuracy, and robustness against various noise factors.
Positive Root Bounds and Root Separation Bounds
Herman, Aaron Paul
In this thesis, we study two classes of bounds on the roots of a polynomial (or polynomial system). A positive root bound of a polynomial is an upper bound on the largest positive root. A root separation bound of a polynomial is a lower bound on the distance between the roots. Both classes of bounds are fundamental tools in computer algebra and computational real algebraic geometry, with numerous applications. In the first part of the thesis, we study the quality of positive root bounds. Higher quality means that the relative over-estimation (the ratio of the bound and the largest positive root) is smaller. We find that all known positive root bounds can be arbitrarily bad. We then show that a particular positive root bound is tight for certain important classes of polynomials. In the remainder of the thesis, we turn to root separation bounds. We observe that known root separation bounds are usually very pessimistic. To our surprise, we also find that known root separation bounds are not compatible with the geometry of the roots (unlike positive root bounds). This motivates us to derive new root separation bounds. In the second part of this thesis, we derive a new root separation for univariate polynomials by transforming a known bound into a new improved bound. In the third part of this thesis, we use a similar strategy to derive a new improved root separation bound for polynomial systems.
Measuring Cosmic Distances with Stellar Heart Beats
2004-10-01
possible with long-baseline interferometry. Also on this front, the VLT Interferometer is now opening a new field of observational astrophysics. Three VLTI baselines ESO PR Photo 30b/04 ESO PR Photo 30b/04 Title [Preview - JPEG: 400 x 345 pix - 112k] [Normal - JPEG: 800 x 690 pix - 276k] Caption: ESO PR Photo 30b/04 is a view of the Paranal platform with the three baselines used for the VLTI observations of Cepheids (in red). ESO PR Photo 30c/04 ESO PR Photo 30c/04 Title [Preview - JPEG: 400 x 367 pix - 88k] [Normal - JPEG: 800 x 734 pix - 180k] Caption: ESO PR Photo 30c/04 shows the VINCI observations of the pulsation of the Cepheid variable L Car (P = 35.5 days, red dots) and the adjusted radius curve (green line), as deduced from the integration of the radial velocity measured on this star over its pulsation period. Some time ago, an undaunted team of French and Swiss astronomers [1] started a major research programme aimed at measuring the distance to several Cepheids by means of the above outlined Baade-Wesselink interferometric method. For these observations they combined sets of two beams - one set from the two VLTI Test Siderostats with 0.35m aperture and the other set from two Unit Telescopes (Antu and Melipal; 8.2m mirrors) - with the VINCI (VLT Interferometer Commissioning Instrument) facility. Three VLTI baselines were used for this programme with, respectively, 66, 140 and 102.5m ground length. ESO PR Photo 30b/04 shows the respective positions on the VLTI platform. The observations were made in the near-infrared K-band. A total of 69 individual angular diameter measurements were obtained with the VLTI, over more than 100 hours of total telescope time, distributed over 68 nights; the largest angular diameter measured was 0.0032 arcsec (L Car at maximum). Seven Cepheids observable from Paranal Observatory were selected for this programme: X and W Sagittarii, Eta Aquilae, Beta Doradus, Zeta Gemini, Y Ophiocus and L Carinae. Their periods range from 7 to 35
The separation of adult separation anxiety disorder.
Baldwin, David S; Gordon, Robert; Abelli, Marianna; Pini, Stefano
2016-08-01
The Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5) categorization of mental disorders places "separation anxiety disorder" within the broad group of anxiety disorders, and its diagnosis no longer rests on establishing an onset during childhood or adolescence. In previous editions of DSM, it was included within the disorders usually first diagnosed in infancy, childhood, or adolescence, with the requirement for an onset of symptoms before the age of 18 years: symptomatic adults could only receive a retrospective diagnosis, based on establishing this early onset. The new position of separation anxiety disorder is based upon the findings of epidemiological studies that revealed the unexpectedly high prevalence of the condition in adults, often in individuals with an onset of symptoms after the teenage years; its prominent place within the DSM-5 group of anxiety disorders should encourage further research into its epidemiology, etiology, and treatment. This review examines the clinical features and boundaries of the condition, and offers guidance on how it can be distinguished from other anxiety disorders and other mental disorders in which "separation anxiety" may be apparent.
The maximum rotation of a galactic disc
Bottema, R
1997-01-01
The observed stellar velocity dispersions of galactic discs show that the maximum rotation of a disc is on average 63% of the observed maximum rotation. This criterion can, however, not be applied to small or low surface brightness (LSB) galaxies because such systems show, in general, a continuously rising rotation curve until the outermost measured radial position. That is why a general relation has been derived, giving the maximum rotation for a disc depending on the luminosity, surface brightness, and colour of the disc. As a physical basis of this relation serves an adopted fixed mass-to-light ratio as a function of colour. That functionality is consistent with results from population synthesis models and its absolute value is determined from the observed stellar velocity dispersions. The derived maximum disc rotation is compared with a number of observed maximum rotations, clearly demonstrating the need for appreciable amounts of dark matter in the disc region and even more so for LSB galaxies. Matters h...
Maximum permissible voltage of YBCO coated conductors
Wen, J.; Lin, B.; Sheng, J.; Xu, J.; Jin, Z.; Hong, Z.; Wang, D.; Zhou, H.; Shen, X.; Shen, C.
2014-06-01
Superconducting fault current limiter (SFCL) could reduce short circuit currents in electrical power system. One of the most important thing in developing SFCL is to find out the maximum permissible voltage of each limiting element. The maximum permissible voltage is defined as the maximum voltage per unit length at which the YBCO coated conductors (CC) do not suffer from critical current (Ic) degradation or burnout. In this research, the time of quenching process is changed and voltage is raised until the Ic degradation or burnout happens. YBCO coated conductors test in the experiment are from American superconductor (AMSC) and Shanghai Jiao Tong University (SJTU). Along with the quenching duration increasing, the maximum permissible voltage of CC decreases. When quenching duration is 100 ms, the maximum permissible of SJTU CC, 12 mm AMSC CC and 4 mm AMSC CC are 0.72 V/cm, 0.52 V/cm and 1.2 V/cm respectively. Based on the results of samples, the whole length of CCs used in the design of a SFCL can be determined.
Computing Rooted and Unrooted Maximum Consistent Supertrees
van Iersel, Leo
2009-01-01
A chief problem in phylogenetics and database theory is the computation of a maximum consistent tree from a set of rooted or unrooted trees. A standard input are triplets, rooted binary trees on three leaves, or quartets, unrooted binary trees on four leaves. We give exact algorithms constructing rooted and unrooted maximum consistent supertrees in time O(2^n n^5 m^2 log(m)) for a set of m triplets (quartets), each one distinctly leaf-labeled by some subset of n labels. The algorithms extend to weighted triplets (quartets). We further present fast exact algorithms for constructing rooted and unrooted maximum consistent trees in polynomial space. Finally, for a set T of m rooted or unrooted trees with maximum degree D and distinctly leaf-labeled by some subset of a set L of n labels, we compute, in O(2^{mD} n^m m^5 n^6 log(m)) time, a tree distinctly leaf-labeled by a maximum-size subset X of L that all trees in T, when restricted to X, are consistent with.
Maximum magnitude earthquakes induced by fluid injection
McGarr, Arthur F.
2014-01-01
Analysis of numerous case histories of earthquake sequences induced by fluid injection at depth reveals that the maximum magnitude appears to be limited according to the total volume of fluid injected. Similarly, the maximum seismic moment seems to have an upper bound proportional to the total volume of injected fluid. Activities involving fluid injection include (1) hydraulic fracturing of shale formations or coal seams to extract gas and oil, (2) disposal of wastewater from these gas and oil activities by injection into deep aquifers, and (3) the development of enhanced geothermal systems by injecting water into hot, low-permeability rock. Of these three operations, wastewater disposal is observed to be associated with the largest earthquakes, with maximum magnitudes sometimes exceeding 5. To estimate the maximum earthquake that could be induced by a given fluid injection project, the rock mass is assumed to be fully saturated, brittle, to respond to injection with a sequence of earthquakes localized to the region weakened by the pore pressure increase of the injection operation and to have a Gutenberg-Richter magnitude distribution with a b value of 1. If these assumptions correctly describe the circumstances of the largest earthquake, then the maximum seismic moment is limited to the volume of injected liquid times the modulus of rigidity. Observations from the available case histories of earthquakes induced by fluid injection are consistent with this bound on seismic moment. In view of the uncertainties in this analysis, however, this should not be regarded as an absolute physical limit.
Maximum magnitude earthquakes induced by fluid injection
McGarr, A.
2014-02-01
Analysis of numerous case histories of earthquake sequences induced by fluid injection at depth reveals that the maximum magnitude appears to be limited according to the total volume of fluid injected. Similarly, the maximum seismic moment seems to have an upper bound proportional to the total volume of injected fluid. Activities involving fluid injection include (1) hydraulic fracturing of shale formations or coal seams to extract gas and oil, (2) disposal of wastewater from these gas and oil activities by injection into deep aquifers, and (3) the development of enhanced geothermal systems by injecting water into hot, low-permeability rock. Of these three operations, wastewater disposal is observed to be associated with the largest earthquakes, with maximum magnitudes sometimes exceeding 5. To estimate the maximum earthquake that could be induced by a given fluid injection project, the rock mass is assumed to be fully saturated, brittle, to respond to injection with a sequence of earthquakes localized to the region weakened by the pore pressure increase of the injection operation and to have a Gutenberg-Richter magnitude distribution with a b value of 1. If these assumptions correctly describe the circumstances of the largest earthquake, then the maximum seismic moment is limited to the volume of injected liquid times the modulus of rigidity. Observations from the available case histories of earthquakes induced by fluid injection are consistent with this bound on seismic moment. In view of the uncertainties in this analysis, however, this should not be regarded as an absolute physical limit.
A Streaming Distance Transform Algorithm for Neighborhood-Sequence Distances
Nicolas Normand
2014-09-01
Full Text Available We describe an algorithm that computes a “translated” 2D Neighborhood-Sequence Distance Transform (DT using a look up table approach. It requires a single raster scan of the input image and produces one line of output for every line of input. The neighborhood sequence is specified either by providing one period of some integer periodic sequence or by providing the rate of appearance of neighborhoods. The full algorithm optionally derives the regular (centered DT from the “translated” DT, providing the result image on-the-ﬂy, with a minimal delay, before the input image is fully processed. Its efficiency can benefit all applications that use neighborhood- sequence distances, particularly when pipelined processing architectures are involved, or when the size of objects in the source image is limited.
Krugman, Dorothy C.
1971-01-01
Discusses the role of the caseworker in providing support to children experiencing separation from their families and emphasizes the need to recognize that there are differences between those separation experiences dictated by the needs of children and those dictated by arbitrary or noncasework factors. (AJ)
Nauta, M.H.; Emmelkamp, P.M.G.; Sturmey, P.; Hersen, M.
2012-01-01
Separation anxiety disorder (SAD) is the only anxiety disorder that is specific to childhood; however, SAD has hardly ever been addressed as a separate disorder in clinical trials investigating treatment outcome. So far, only parent training has been developed specifically for SAD. This particular t
Mineka, Susan; Suomi, Stephen J.
1978-01-01
Reviews phenomena associated with social separation from attachment objects in nonhuman primates. Evaluates four theoretical treatments of separation in light of existing data: Bowlby's attachment-object-loss theory, Kaufman's conservation-withdrawal theory, Seligman's learned helplessness theory, and Solomon and Corbit's opponent-process theory.…
Nonterminal Separating Macro Grammars
Hogendorp, Jan Anne; Asveld, P.R.J.; Nijholt, A.; Verbeek, Leo A.M.
1987-01-01
We extend the concept of nonterminal separating (or NTS) context-free grammar to nonterminal separating $m$-macro grammar where the mode of derivation $m$ is equal to "unrestricted". "outside-in' or "inside-out". Then we show some (partial) characterization results for these NTS $m$-macro grammars.
A Large Catalog of Accurate Distances to Molecular Clouds from PS1 Photometry
Schlafly, E F; Finkbeiner, D P; Rix, H -W; Bell, E F; Burgett, W S; Chambers, K C; Draper, P W; Hodapp, K W; Kaiser, N; Magnier, E A; Martin, N F; Metcalfe, N; Price, P A; Tonry, J L
2014-01-01
Distance measurements to molecular clouds are important, but are often made separately for each cloud of interest, employing very different different data and techniques. We present a large, homogeneous catalog of distances to molecular clouds, most of which are of unprecedented accuracy. We determine distances using optical photometry of stars along lines of sight toward these clouds, obtained from PanSTARRS-1. We simultaneously infer the reddenings and distances to these stars, tracking the full probability distribution function using a technique presented in Green et al. (2014). We fit these star-by-star measurements using a simple dust screen model to find the distance to each cloud. We thus estimate the distances to almost all of the clouds in the Magnani et al. (1985) catalog, as well as many other well-studied clouds, including Orion, Perseus, Taurus, Cepheus, Polaris, California, and Monoceros R2, avoiding only the inner Galaxy. Typical statistical uncertainties in the distances are 5%, though the sys...
Maximum Multiflow in Wireless Network Coding
Zhou, Jin-Yi; Jiang, Yong; Zheng, Hai-Tao
2012-01-01
In a multihop wireless network, wireless interference is crucial to the maximum multiflow (MMF) problem, which studies the maximum throughput between multiple pairs of sources and sinks. In this paper, we observe that network coding could help to decrease the impacts of wireless interference, and propose a framework to study the MMF problem for multihop wireless networks with network coding. Firstly, a network model is set up to describe the new conflict relations modified by network coding. Then, we formulate a linear programming problem to compute the maximum throughput and show its superiority over one in networks without coding. Finally, the MMF problem in wireless network coding is shown to be NP-hard and a polynomial approximation algorithm is proposed.
Dependence of maximum concentration from chemical accidents on release duration
Hanna, Steven; Chang, Joseph
2017-01-01
Chemical accidents often involve releases of a total mass, Q, of stored material in a tank over a time duration, td, of less than a few minutes. The value of td is usually uncertain because of lack of knowledge of key information, such as the size and location of the hole and the pressure and temperature of the chemical. In addition, it is rare that eyewitnesses or video cameras are present at the time of the accident. For inhalation hazards, serious health effects (such as damage to the respiratory system) are determined by short term averages (pressurized liquefied chlorine releases from tanks are given, focusing on scenarios from the Jack Rabbit I (JR I) field experiment. The analytical calculations and the predictions of the SLAB dense gas dispersion model agree that the ratio of maximum C for two different td's is greatest (as much as a factor of ten) near the source. At large distances (beyond a few km for the JR I scenarios), where tt exceeds both td's, the ratio of maximum C approaches unity.
Spiral microfluidic nanoparticle separators
Bhagat, Ali Asgar S.; Kuntaegowdanahalli, Sathyakumar S.; Dionysiou, Dionysios D.; Papautsky, Ian
2008-02-01
Nanoparticles have potential applications in many areas such as consumer products, health care, electronics, energy and other industries. As the use of nanoparticles in manufacturing increases, we anticipate a growing need to detect and measure particles of nanometer scale dimensions in fluids to control emissions of possible toxic nanoparticles. At present most particle separation techniques are based on membrane assisted filtering schemes. Unfortunately their efficiency is limited by the membrane pore size, making them inefficient for separating a wide range of sizes. In this paper, we propose a passive spiral microfluidic geometry for momentum-based particle separations. The proposed design is versatile and is capable of separating particulate mixtures over a wide dynamic range and we expect it will enable a variety of environmental, medical, or manufacturing applications that involve rapid separation of nanoparticles in real-world samples with a wide range of particle components.
The NFL Combine 40-Yard Dash: How Important is Maximum Velocity?
Clark, Kenneth P; Rieger, Randall H; Bruno, Richard F; Stearne, David J
2017-06-22
This investigation analyzed the sprint velocity profiles for athletes who completed the 40-yard (36.6m) dash at the 2016 NFL Combine. The purpose was to evaluate the relationship between maximum velocity and sprint performance, and to compare acceleration patterns for fast and slow athletes. Using freely available online sources, data were collected for body mass and sprint performance (36.6m time with split intervals at 9.1 and 18.3m). For each athlete, split times were utilized to generate modeled curves of distance vs. time, velocity vs. time, and velocity vs. distance using a mono-exponential equation. Model parameters were used to quantify acceleration patterns as the ratio of maximum velocity to maximum acceleration (vmax / amax, or τ). Linear regression was used to evaluate the relationship between maximum velocity and sprint performance for the entire sample. Additionally, athletes were categorized into fast and slow groups based on maximum velocity, with independent t-tests and effect size statistics used to evaluate between-group differences in sprint performance and acceleration patterns. Results indicated that maximum velocity was strongly correlated with sprint performance across 9.1m, 18.3m, and 36.6m (r of 0.72, 0.83, and 0.94, respectively). However, both fast and slow groups accelerated in a similar pattern relative to maximum velocity (τ = 0.768 ± 0.068s for the fast group and τ = 0.773 ± 0.070s for the slow group). We conclude that maximum velocity is of critical importance to 36.6m time, and inclusion of more maximum velocity training may be warranted for athletes preparing for the NFL Combine.
Maximum confidence measurements via probabilistic quantum cloning
Zhang Wen-Hai; Yu Long-Bao; Cao Zhuo-Liang; Ye Liu
2013-01-01
Probabilistic quantum cloning (PQC) cannot copy a set of linearly dependent quantum states.In this paper,we show that if incorrect copies are allowed to be produced,linearly dependent quantum states may also be cloned by the PQC.By exploiting this kind of PQC to clone a special set of three linearly dependent quantum states,we derive the upper bound of the maximum confidence measure of a set.An explicit transformation of the maximum confidence measure is presented.
Maximum floodflows in the conterminous United States
Crippen, John R.; Bue, Conrad D.
1977-01-01
Peak floodflows from thousands of observation sites within the conterminous United States were studied to provide a guide for estimating potential maximum floodflows. Data were selected from 883 sites with drainage areas of less than 10,000 square miles (25,900 square kilometers) and were grouped into regional sets. Outstanding floods for each region were plotted on graphs, and envelope curves were computed that offer reasonable limits for estimates of maximum floods. The curves indicate that floods may occur that are two to three times greater than those known for most streams.
Revealing the Maximum Strength in Nanotwinned Copper
Lu, L.; Chen, X.; Huang, Xiaoxu
2009-01-01
The strength of polycrystalline materials increases with decreasing grain size. Below a critical size, smaller grains might lead to softening, as suggested by atomistic simulations. The strongest size should arise at a transition in deformation mechanism from lattice dislocation activities to grain...... boundary–related processes. We investigated the maximum strength of nanotwinned copper samples with different twin thicknesses. We found that the strength increases with decreasing twin thickness, reaching a maximum at 15 nanometers, followed by a softening at smaller values that is accompanied by enhanced...
The Maximum Resource Bin Packing Problem
Boyar, J.; Epstein, L.; Favrholdt, L.M.
2006-01-01
Usually, for bin packing problems, we try to minimize the number of bins used or in the case of the dual bin packing problem, maximize the number or total size of accepted items. This paper presents results for the opposite problems, where we would like to maximize the number of bins used...... algorithms, First-Fit-Increasing and First-Fit-Decreasing for the maximum resource variant of classical bin packing. For the on-line variant, we define maximum resource variants of classical and dual bin packing. For dual bin packing, no on-line algorithm is competitive. For classical bin packing, we find...
Maximum entropy analysis of EGRET data
Pohl, M.; Strong, A.W.
1997-01-01
EGRET data are usually analysed on the basis of the Maximum-Likelihood method \\cite{ma96} in a search for point sources in excess to a model for the background radiation (e.g. \\cite{hu97}). This method depends strongly on the quality of the background model, and thus may have high systematic unce...... uncertainties in region of strong and uncertain background like the Galactic Center region. Here we show images of such regions obtained by the quantified Maximum-Entropy method. We also discuss a possible further use of MEM in the analysis of problematic regions of the sky....
Revealing the Maximum Strength in Nanotwinned Copper
Lu, L.; Chen, X.; Huang, Xiaoxu
2009-01-01
The strength of polycrystalline materials increases with decreasing grain size. Below a critical size, smaller grains might lead to softening, as suggested by atomistic simulations. The strongest size should arise at a transition in deformation mechanism from lattice dislocation activities to grain...... boundary–related processes. We investigated the maximum strength of nanotwinned copper samples with different twin thicknesses. We found that the strength increases with decreasing twin thickness, reaching a maximum at 15 nanometers, followed by a softening at smaller values that is accompanied by enhanced...
Maximum phytoplankton concentrations in the sea
Jackson, G.A.; Kiørboe, Thomas
2008-01-01
A simplification of plankton dynamics using coagulation theory provides predictions of the maximum algal concentration sustainable in aquatic systems. These predictions have previously been tested successfully against results from iron fertilization experiments. We extend the test to data collected...... in the North Atlantic as part of the Bermuda Atlantic Time Series program as well as data collected off Southern California as part of the Southern California Bight Study program. The observed maximum particulate organic carbon and volumetric particle concentrations are consistent with the predictions...
DISTANCE EDUCATION IN NURSING GRADUATION COURSES: APPLICATION AND EFFECTIVENESS
Erika Zambrano Tanaka
2017-10-01
Full Text Available Distance education (EaD was first recognized in the Law of Guidelines and Bases of Education (LBD in 1996 and refers to a teaching-learning modality where students and tutors are separated yet connected through various technologies, like the internet. Distance Education has been growing steadily over the years, and its use has been constant in various modalities of courses, whether technical, undergraduate or postgraduate. Nursing courses, as well as other courses in the health area, have used it in order to facilitate access to learning, offering the student quality teaching and knowledge of new technologies. This study was developed with the purpose of analyzing Distance Education, as well as its application in the nursing courses. For that, a qualitative literature review was carried out. National databases published from 2002 to 2014 were withdrawn.
Direct maximum parsimony phylogeny reconstruction from genotype data
Ravi R
2007-12-01
Full Text Available Abstract Background Maximum parsimony phylogenetic tree reconstruction from genetic variation data is a fundamental problem in computational genetics with many practical applications in population genetics, whole genome analysis, and the search for genetic predictors of disease. Efficient methods are available for reconstruction of maximum parsimony trees from haplotype data, but such data are difficult to determine directly for autosomal DNA. Data more commonly is available in the form of genotypes, which consist of conflated combinations of pairs of haplotypes from homologous chromosomes. Currently, there are no general algorithms for the direct reconstruction of maximum parsimony phylogenies from genotype data. Hence phylogenetic applications for autosomal data must therefore rely on other methods for first computationally inferring haplotypes from genotypes. Results In this work, we develop the first practical method for computing maximum parsimony phylogenies directly from genotype data. We show that the standard practice of first inferring haplotypes from genotypes and then reconstructing a phylogeny on the haplotypes often substantially overestimates phylogeny size. As an immediate application, our method can be used to determine the minimum number of mutations required to explain a given set of observed genotypes. Conclusion Phylogeny reconstruction directly from unphased data is computationally feasible for moderate-sized problem instances and can lead to substantially more accurate tree size inferences than the standard practice of treating phasing and phylogeny construction as two separate analysis stages. The difference between the approaches is particularly important for downstream applications that require a lower-bound on the number of mutations that the genetic region has undergone.
COMPARISON OF SELECTED PHYSIOLOGICAL VARIABLES OF PLAYERS BELONGING TO VARIOUS DISTANCE RUNNERS
Satpal Yadav
2009-12-01
Full Text Available The purpose of the study was to compare the selected physiological variables namely; maximum oxygen consumption, vital capacity, resting heart rate and hemoglobin content among various distance runners. Thesubjects were selected from the male athlete’s of Gwalior district of various distance runners i.e. short, middle and long distance runners for this study. Ten (10 male athletes from each groups namely short, middle and long distance groups were selected as the subject for the study. Selected physiological variables such as maximum oxygen consumption, vital capacity, resting heart rate and hemoglobin content were presented to compare the players belonging to various distance runners namely short, middle and long distance. To see the significant difference of selected physiological variables among the players belonging to various distance runners the analysis of variance “F-ratio” was applied at.05 level of significance. For further analysis “Post-Hoc Test” (LSD Test was applied. The short distance runners had shown significantly different level of VO2 max (72.727 in comparison to middle distance (75.854 and long distance (77.094 runners. However, the middle and long distance runners had shown more or less same level of VO2. Further long distance runners had shown better efficiency of heart as its mean value (56.3 was lowest among all the three groups in relation to resting heartrate. On the other hand long, middle and short distance runners had shown more or less same vital capacity and hemoglobin content with a small range of variation.
Effective Teaching in Distance Education. ERIC Digest.
Mielke, Dan
Distance education is an alternative method for delivering academic course work to students unable to attend traditional campus-based classes. This Digest presents information on the many forms of distance education and keys to successful teaching with distance education. Distance education is a method of education in which the learner is…
The intractability of computing the Hamming distance
Manthey, Bodo; Reischuk, Rüdiger
2005-01-01
Given a string x and a language L, the Hamming distance of x to L is the minimum Hamming distance of x to any string in L. The edit distance of a string to a language is analogously defined. First, we prove that there is a language in $AC^0$ such that both Hamming and edit distance to this language
Distance Education Use in Rural Schools
Hannum, Wallace H.; Irvin, Matthew J.; Banks, Jonathan B.; Farmer, Thomas W.
2009-01-01
A national survey of rural school systems in the United States was conducted to determine the extent to which distance education is being utilized by rural schools, the technologies used, the curriculum areas impacted, the perceived needs for distance education, their satisfaction with distance education, and the barriers to distance education…
History and Heritage in Distance Education
Anderson, Bill; Simpson, Mary
2012-01-01
Distance education's history is a tremendous resource for all involved in distance education. Some aspects of that history provide enduring touchstones for present distance educators, creating a heritage that should not be overlooked as distance education continues to develop and expand. In this article we draw on the concept of generational…
Emerging Model for a Web Based Distance Education Environment - WBDEE
Zdravev, Zoran; Grceva, Solza
2004-01-01
In this article a concept of a pilot model is shown for the implementation of ICT in a potential system of Distance Learning enviroment: WBDEE. Three main modules are shown: Content Presentation, Interaction and Evaluation. Also it was worked on: Service & Support and Media & Tools. The main effort is focused and dedicated to the module Interaction where rules of interaction are given and communications are looked over separately: learner-content, learner-instructor, learner-learner and...
Supercritical fluid reverse micelle separation
Fulton, John L.; Smith, Richard D.
1993-01-01
A method of separating solute material from a polar fluid in a first polar fluid phase is provided. The method comprises combining a polar fluid, a second fluid that is a gas at standard temperature and pressure and has a critical density, and a surfactant. The solute material is dissolved in the polar fluid to define the first polar fluid phase. The combined polar and second fluids, surfactant, and solute material dissolved in the polar fluid is maintained under near critical or supercritical temperature and pressure conditions such that the density of the second fluid exceeds the critical density thereof. In this way, a reverse micelle system defining a reverse micelle solvent is formed which comprises a continuous phase in the second fluid and a plurality of reverse micelles dispersed in the continuous phase. The solute material is dissolved in the polar fluid and is in chemical equilibrium with the reverse micelles. The first polar fluid phase and the continuous phase are immiscible. The reverse micelles each comprise a dynamic aggregate of surfactant molecules surrounding a core of the polar fluid. The reverse micelle solvent has a polar fluid-to-surfactant molar ratio W, which can vary over a range having a maximum ratio W.sub.o that determines the maximum size of the reverse micelles. The maximum ratio W.sub.o of the reverse micelle solvent is then varied, and the solute material from the first polar fluid phase is transported into the reverse micelles in the continuous phase at an extraction efficiency determined by the critical or supercritical conditions.
Supercritical fluid reverse micelle separation
Fulton, J.L.; Smith, R.D.
1993-11-30
A method of separating solute material from a polar fluid in a first polar fluid phase is provided. The method comprises combining a polar fluid, a second fluid that is a gas at standard temperature and pressure and has a critical density, and a surfactant. The solute material is dissolved in the polar fluid to define the first polar fluid phase. The combined polar and second fluids, surfactant, and solute material dissolved in the polar fluid is maintained under near critical or supercritical temperature and pressure conditions such that the density of the second fluid exceeds the critical density thereof. In this way, a reverse micelle system defining a reverse micelle solvent is formed which comprises a continuous phase in the second fluid and a plurality of reverse micelles dispersed in the continuous phase. The solute material is dissolved in the polar fluid and is in chemical equilibrium with the reverse micelles. The first polar fluid phase and the continuous phase are immiscible. The reverse micelles each comprise a dynamic aggregate of surfactant molecules surrounding a core of the polar fluid. The reverse micelle solvent has a polar fluid-to-surfactant molar ratio W, which can vary over a range having a maximum ratio W[sub o] that determines the maximum size of the reverse micelles. The maximum ratio W[sub o] of the reverse micelle solvent is then varied, and the solute material from the first polar fluid phase is transported into the reverse micelles in the continuous phase at an extraction efficiency determined by the critical or supercritical conditions. 27 figures.
Determining distances using asteroseismic methods
Aguirre, V Silva; Basu, S; Campante, T L; Chaplin, W J; Huber, D; Miglio, A; Serenelli, A M; WG#1, KASC
2012-01-01
Asteroseismology has been extremely successful in determining the properties of stars in different evolutionary stages with a remarkable level of precision. However, to fully exploit its potential, robust methods for estimating stellar parameters are required and independent verification of the results is needed. In this talk, I present a new technique developed to obtain stellar properties by coupling asteroseismic analysis with the InfraRed Flux Method. Using two global seismic observables and multi-band photometry, the technique determines masses, radii, effective temperatures, bolometric fluxes, and thus distances for field stars in a self-consistent manner. Applying our method to a sample of solar-like oscillators in the {\\it Kepler} field that have accurate {\\it Hipparcos} parallaxes, we find agreement in our distance determinations to better than 5%. Comparison with measurements of spectroscopic effective temperatures and interferometric radii also validate our results, and show that our technique can ...
Managerial Distance and Virtual Ownership
Hansmann, Henry; Thomsen, Steen
Industrial foundations are autonomous nonprofit entities that own and control one or more conventional business firms. These foundations are common in Northern Europe, where they own a number of internationally prominent companies. Previous studies have indicated, surprisingly, that companies con......, but corporate governance and fiduciary behavior more generally....... on differences among the industrial foundations themselves. We work with a rich data set comprising 113 foundation-owned Danish companies over the period 2003-2008. We focus in particular on a composite structural factor that we term “managerial distance.” We propose this as a measure of the extent to which......-seeking outside owners of the company. Consistent with this hypothesis, our empirical analysis shows a positive, significant, and robust association between managerial distance and the economic performance of foundation owned companies. The findings appear to illuminate not just foundation governance...
Theological Librarianship from a Distance
Melody Diehl Detar
2015-08-01
Full Text Available This essay examines distance theological librarianship and the field’s suitability for remote librarians. A brief introduction to the landscape of online programs in theological education is followed by an overview of virtual librarianship and how theological librarians may serve students while working from a distance themselves. The essay then describes a method for initiating a remote librarian position in a theological library context, and then reviews the steps of determining whether remote work is feasible and desirable at an institution, approaching leadership with a plan, setting up a trial remote work period, and assessing its success. Particular emphasis is given to communication expectations, modes of virtual reference and instruction, campus committee service and meaningful ways of remaining part of the campus community.
Moral distance in dictator games
Fernando Aguiar
2008-04-01
Full Text Available We perform an experimental investigation using a dictator game in which individuals must make a moral decision --- to give or not to give an amount of money to poor people in the Third World. A questionnaire in which the subjects are asked about the reasons for their decision shows that, at least in this case, moral motivations carry a heavy weight in the decision: the majority of dictators give the money for reasons of a consequentialist nature. Based on the results presented here and of other analogous experiments, we conclude that dicator behavior can be understood in terms of moral distance rather than social distance and that it systematically deviates from the egoism assumption in economic models and game theory. %extit{JEL}: A13, C72, C91
SHIELD: Distance Estimates from Hubble Space Telescope Imaging
Cave, Ian; Cannon, J. M.; Larson, E.; Marshall, M.; Moody, S.; Adams, E. A.; Dolphin, A. E.; Elson, E. C.; Giovanelli, R.; Haynes, M. P.; McQuinn, K. B.; Ott, J.; Saintonge, A.; Salzer, J. J.; Skillman, E. D.
2013-01-01
The Survey of HI in Extremely Low-mass Dwarfs (SHIELD) is an ongoing study of twelve galaxies with HI masses between 106 and 107 Solar masses, detected by the Arecibo Legacy Fast ALFA (ALFALFA) survey. Here we present new Hubble Space Telescope (HST) imaging of the SHIELD galaxies. The primary goal is to determine the distance of each galaxy. We apply two techniques to measure the apparent magnitude of the tip of the red giant branch (TRGB) feature in the HST color magnitude diagrams. First, a custom designed edge detection filter was written to determine the TRGB magnitude based on a user-selected region of the color magnitude diagram. Second, we apply the maximum likelihood technique implemented in the "TRGBtool" software package (Makarov et al. 2006). In addition to the distances based on the TRGB feature, we also use the MATCH software (Dolphin 2002) to determine the best-fit distance based on the overall CMD morphology. We compare these distance estimates for all members of the SHIELD galaxies, and present a final table of distances that is used in each of the companion SHIELD presentations.
Students’ Role in Distance Learning
Beers Fägersten, Kristy
2008-01-01
1. IntroductionMuch of the support that students have in a traditional classroom is absent in a distance learning course. In the traditional classroom, the learner is together with his or her classmates and the teacher; learning is socially embedded. Students can talk to each other and may learn from each other as they go through the learning process together. They also witness the teacher’s expression of the knowledge firsthand. The class participants communicate to each other not ...
Distance probes of dark energy
Kim, A. G.; Padmanabhan, N.; Aldering, G.; Allen, S. W.; Baltay, C.; Cahn, R. N.; D’Andrea, C. B.; Dalal, N.; Dawson, K. S.; Denney, K. D.; Eisenstein, D. J.; Finley, D. A.; Freedman, W. L.; Ho, S.; Holz, D. E.; Kasen, D.; Kent, S. M.; Kessler, R.; Kuhlmann, S.; Linder, E. V.; Martini, P.; Nugent, P. E.; Perlmutter, S.; Peterson, B. M.; Riess, A. G.; Rubin, D.; Sako, M.; Suntzeff, N. V.; Suzuki, N.; Thomas, R. C.; Wood-Vasey, W. M.; Woosley, S. E.
2015-03-01
This document presents the results from the Distances subgroup of the Cosmic Frontier Community Planning Study (Snowmass 2013). We summarize the current state of the field as well as future prospects and challenges. In addition to the established probes using Type Ia supernovae and baryon acoustic oscillations, we also consider prospective methods based on clusters, active galactic nuclei, gravitational wave sirens and strong lensing time delays.
Hardware Euclidean Distance Transform Implementation
XIE Ying-hua; ZENG Pei-feng; TANG Li-ping
2004-01-01
Based on an efficient algorithm of Euclidean distance transform for binary images, a circuit of O(N2) size is proposed. With in-place calculation, both the intermediate data storing and the result output use the same memory with the input data. This reduces the amount of memory largely. By replacing multipliers with counters, comparators, and adders, the circuit size is further reduced and its calculation speed is improved also.
Distance Probes of Dark Energy
Kim, A; Aldering, G; Allen, S; Baltay, C; Cahn, R; D'Andrea, C; Dalal, N; Dawson, K; Denney, K; Eisenstein, D; Finley, D; Freedman, W; Ho, S; Holz, D; Kent, A; Kasen, D; Kessler, R; Kuhlmann, S; Linder, E; Martini, P; Nugent, P; Perlmutter, S; Peterson, B; Riess, A; Rubin, D; Sako, M; Suntzeff, N; Suzuki, N; Thomas, R; Wood-Vasey, W M; Woosley, S
2013-01-01
This document presents the results from the Distances subgroup of the Cosmic Frontier Community Planning Study (Snowmass 2013). We summarize the current state of the field as well as future prospects and challenges. In addition to the established probes using Type IA supernovae and baryon acoustic oscillations, we also consider prospective methods based on clusters, active galactic nuclei, gravitational wave sirens and strong lensing time delays.
Serfontein, Dawid E., E-mail: Dawid.Serfontein@nwu.ac.za
2014-05-01
In a preceding study, coupled neutronics and thermo-hydraulic simulations were performed with the VSOP-A diffusion code for the standard 9.6 wt% enriched 9 g uranium fuel spheres in the 400 MWth Pebble Bed Modular Reactor Demonstration Power Plant. The axial power profile peaked at about a third from the top of the fuel core and the radial profile peaked directly adjacent to the central graphite reflector. The maximum temperature during a Depressurised Loss of Coolant (DLOFC) incident was 1581.0 °C, which is close to the limit of 1600 °C above which the leakage of radioactive fission products through the TRISO coatings around the fuel kernels may become unacceptable. This may present licensing challenges and also limits the total power output of the reactor. In this article the results of an optimisation study of the axial and radial power profiles for this reactor are reported. The main aim was to minimise the maximum DLOFC temperature. Reducing the maximum equilibrium temperature during normal operation was a lesser aim. Minimising the maximum DLOFC temperature was achieved by placing an optimised distribution of {sup 10}B neutron poison in the central reflector. The standard power profiles are sub-optimal with respect to the passive leakage of decay heat during a DLOFC. Since the radial power profile peaks directly adjacent to the central reflector, the distance that the decay heat needs to be conducted toward the outside of the reactor and the ultimate heat sink is at a maximum. The sharp axial power profile peak means that most of the decay power is concentrated in a small part of the core volume, thereby sharply increasing the required outward heat flux in this hotspot region. Both these features sharply increase the maximum DLOFC temperatures in this hotspot. Therefore the axial distribution of the neutron poisons in the central reflector was optimised so as to push the equilibrium power density profile radially outward and to suppress the axial power peak
Analysis of Photovoltaic Maximum Power Point Trackers
Veerachary, Mummadi
The photovoltaic generator exhibits a non-linear i-v characteristic and its maximum power point (MPP) varies with solar insolation. An intermediate switch-mode dc-dc converter is required to extract maximum power from the photovoltaic array. In this paper buck, boost and buck-boost topologies are considered and a detailed mathematical analysis, both for continuous and discontinuous inductor current operation, is given for MPP operation. The conditions on the connected load values and duty ratio are derived for achieving the satisfactory maximum power point operation. Further, it is shown that certain load values, falling out of the optimal range, will drive the operating point away from the true maximum power point. Detailed comparison of various topologies for MPPT is given. Selection of the converter topology for a given loading is discussed. Detailed discussion on circuit-oriented model development is given and then MPPT effectiveness of various converter systems is verified through simulations. Proposed theory and analysis is validated through experimental investigations.
On maximum cycle packings in polyhedral graphs
Peter Recht
2014-04-01
Full Text Available This paper addresses upper and lower bounds for the cardinality of a maximum vertex-/edge-disjoint cycle packing in a polyhedral graph G. Bounds on the cardinality of such packings are provided, that depend on the size, the order or the number of faces of G, respectively. Polyhedral graphs are constructed, that attain these bounds.
Hard graphs for the maximum clique problem
Hoede, Cornelis
1988-01-01
The maximum clique problem is one of the NP-complete problems. There are graphs for which a reduction technique exists that transforms the problem for these graphs into one for graphs with specific properties in polynomial time. The resulting graphs do not grow exponentially in order and number. Gra
Maximum Likelihood Estimation of Search Costs
J.L. Moraga-Gonzalez (José Luis); M.R. Wildenbeest (Matthijs)
2006-01-01
textabstractIn a recent paper Hong and Shum (forthcoming) present a structural methodology to estimate search cost distributions. We extend their approach to the case of oligopoly and present a maximum likelihood estimate of the search cost distribution. We apply our method to a data set of online p
Weak Scale From the Maximum Entropy Principle
Hamada, Yuta; Kawana, Kiyoharu
2015-01-01
The theory of multiverse and wormholes suggests that the parameters of the Standard Model are fixed in such a way that the radiation of the $S^{3}$ universe at the final stage $S_{rad}$ becomes maximum, which we call the maximum entropy principle. Although it is difficult to confirm this principle generally, for a few parameters of the Standard Model, we can check whether $S_{rad}$ actually becomes maximum at the observed values. In this paper, we regard $S_{rad}$ at the final stage as a function of the weak scale ( the Higgs expectation value ) $v_{h}$, and show that it becomes maximum around $v_{h}={\\cal{O}}(300\\text{GeV})$ when the dimensionless couplings in the Standard Model, that is, the Higgs self coupling, the gauge couplings, and the Yukawa couplings are fixed. Roughly speaking, we find that the weak scale is given by \\begin{equation} v_{h}\\sim\\frac{T_{BBN}^{2}}{M_{pl}y_{e}^{5}},\
Weak scale from the maximum entropy principle
Hamada, Yuta; Kawai, Hikaru; Kawana, Kiyoharu
2015-03-01
The theory of the multiverse and wormholes suggests that the parameters of the Standard Model (SM) are fixed in such a way that the radiation of the S3 universe at the final stage S_rad becomes maximum, which we call the maximum entropy principle. Although it is difficult to confirm this principle generally, for a few parameters of the SM, we can check whether S_rad actually becomes maximum at the observed values. In this paper, we regard S_rad at the final stage as a function of the weak scale (the Higgs expectation value) vh, and show that it becomes maximum around vh = {{O}} (300 GeV) when the dimensionless couplings in the SM, i.e., the Higgs self-coupling, the gauge couplings, and the Yukawa couplings are fixed. Roughly speaking, we find that the weak scale is given by vh ˜ T_{BBN}2 / (M_{pl}ye5), where ye is the Yukawa coupling of electron, T_BBN is the temperature at which the Big Bang nucleosynthesis starts, and M_pl is the Planck mass.
Global characterization of the Holocene Thermal Maximum
Renssen, H.; Seppä, H.; Crosta, X.; Goosse, H.; Roche, D.M.V.A.P.
2012-01-01
We analyze the global variations in the timing and magnitude of the Holocene Thermal Maximum (HTM) and their dependence on various forcings in transient simulations covering the last 9000 years (9 ka), performed with a global atmosphere-ocean-vegetation model. In these experiments, we consider the i
Instance Optimality of the Adaptive Maximum Strategy
L. Diening; C. Kreuzer; R. Stevenson
2016-01-01
In this paper, we prove that the standard adaptive finite element method with a (modified) maximum marking strategy is instance optimal for the total error, being the square root of the squared energy error plus the squared oscillation. This result will be derived in the model setting of Poisson’s e
Maximum phonation time: variability and reliability.
Speyer, Renée; Bogaardt, Hans C A; Passos, Valéria Lima; Roodenburg, Nel P H D; Zumach, Anne; Heijnen, Mariëlle A M; Baijens, Laura W J; Fleskens, Stijn J H M; Brunings, Jan W
2010-05-01
The objective of the study was to determine maximum phonation time reliability as a function of the number of trials, days, and raters in dysphonic and control subjects. Two groups of adult subjects participated in this reliability study: a group of outpatients with functional or organic dysphonia versus a group of healthy control subjects matched by age and gender. Over a period of maximally 6 weeks, three video recordings were made of five subjects' maximum phonation time trials. A panel of five experts were responsible for all measurements, including a repeated measurement of the subjects' first recordings. Patients showed significantly shorter maximum phonation times compared with healthy controls (on average, 6.6 seconds shorter). The averaged interclass correlation coefficient (ICC) over all raters per trial for the first day was 0.998. The averaged reliability coefficient per rater and per trial for repeated measurements of the first day's data was 0.997, indicating high intrarater reliability. The mean reliability coefficient per day for one trial was 0.939. When using five trials, the reliability increased to 0.987. The reliability over five trials for a single day was 0.836; for 2 days, 0.911; and for 3 days, 0.935. To conclude, the maximum phonation time has proven to be a highly reliable measure in voice assessment. A single rater is sufficient to provide highly reliable measurements.
Maximum Phonation Time: Variability and Reliability
R. Speyer; H.C.A. Bogaardt; V.L. Passos; N.P.H.D. Roodenburg; A. Zumach; M.A.M. Heijnen; L.W.J. Baijens; S.J.H.M. Fleskens; J.W. Brunings
2010-01-01
The objective of the study was to determine maximum phonation time reliability as a function of the number of trials, days, and raters in dysphonic and control subjects. Two groups of adult subjects participated in this reliability study: a group of outpatients with functional or organic dysphonia v
Maximum likelihood estimation of fractionally cointegrated systems
Lasak, Katarzyna
In this paper we consider a fractionally cointegrated error correction model and investigate asymptotic properties of the maximum likelihood (ML) estimators of the matrix of the cointe- gration relations, the degree of fractional cointegration, the matrix of the speed of adjustment...
Maximum likelihood estimation for integrated diffusion processes
Baltazar-Larios, Fernando; Sørensen, Michael
EM-algorithm to obtain maximum likelihood estimates of the parameters in the diffusion model. As part of the algorithm, we use a recent simple method for approximate simulation of diffusion bridges. In simulation studies for the Ornstein-Uhlenbeck process and the CIR process the proposed method works...
Maximum gain of Yagi-Uda arrays
Bojsen, J.H.; Schjær-Jacobsen, Hans; Nilsson, E.
1971-01-01
Numerical optimisation techniques have been used to find the maximum gain of some specific parasitic arrays. The gain of an array of infinitely thin, equispaced dipoles loaded with arbitrary reactances has been optimised. The results show that standard travelling-wave design methods are not optimum....... Yagi–Uda arrays with equal and unequal spacing have also been optimised with experimental verification....
The Magnetotail at Lunar Distance
Sibeck, D. G.
2015-12-01
This presentation reviews some of the single-point observations of the magnetotail at lunar distances made by ALSEP, Explorer 33, 35, ISEE-3, and Geotail that form the framework for interpreting more recent dual-spacecraft ARTEMIS observations. Earth's distant magnetotail flaps, twists, and flattens in response to variations in the solar wind flow direction and interplanetary magnetic field (IMF) orientation. It may even disappear leaving nothing more than a wake during strongly northward IMF orientations. Standing slow mode expansion fans provide for a gradual transition between magnetotail lobe and magnetosheath plasma and magnetic field parameters. The distant neutral line may at times reside at lunar distances, creating jets of sunward-streaming plasma within the cislunar plasma sheet and layers of streaming energetic particles on its boundaries. Reconnection at near-Earth neutral lines releases antisunward-moving plasmoids that transit lunar distances, briefly expanding the diameter of the plasma sheet and magnetotail. Taken as a whole, the distant magnetotail is a fascinating plasma laboratory and a region of great important to the magnetosphere.
Support Services for Distance Education
Sandra Frieden
1999-01-01
Full Text Available The creation and operation of a distance education support infrastructure requires the collaboration of virtually all administrative departments whose activities deal with students and faculty, and all participating academic departments. Implementation can build on where the institution is and design service-oriented strategies that strengthen institutional support and commitment. Issues to address include planning, faculty issues and concerns, policies and guidelines, approval processes, scheduling, training, publicity, information-line operations, informational materials, orientation and registration processes, class coordination and support, testing, evaluations, receive site management, partnerships, budgets, staffing, library and e-mail support, and different delivery modes (microwave, compressed video, radio, satellite, public television/cable, video tape and online. The process is ongoing and increasingly participative as various groups on campus begin to get involved with distance education activities. The distance education unit must continuously examine and revise its processes and procedures to maintain the academic integrity and service excellence of its programs. Its a daunting prospect to revise the way things have been done for many years, but each department has an opportunity to respond to new ways of serving and reaching students.
Fingerprinting with Minimum Distance Decoding
Lin, Shih-Chun; Gamal, Hesham El
2007-01-01
This work adopts an information theoretic framework for the design of collusion-resistant coding/decoding schemes for digital fingerprinting. More specifically, the minimum distance decision rule is used to identify 1 out of t pirates. Achievable rates, under this detection rule, are characterized in two distinct scenarios. First, we consider the averaging attack where a random coding argument is used to show that the rate 1/2 is achievable with t=2 pirates. Our study is then extended to the general case of arbitrary $t$ highlighting the underlying complexity-performance tradeoff. Overall, these results establish the significant performance gains offered by minimum distance decoding as compared to other approaches based on orthogonal codes and correlation detectors. In the second scenario, we characterize the achievable rates, with minimum distance decoding, under any collusion attack that satisfies the marking assumption. For t=2 pirates, we show that the rate $1-H(0.25)\\approx 0.188$ is achievable using an ...
Duvall, Thomas L.; Hanasoge, Shravan M.
2012-01-01
With large separations (10-24 deg heliocentric), it has proven possible to cleanly separate the horizontal and vertical components of supergranular flow with time-distance helioseismology. These measurements require very broad filters in the k-$\\omega$ power spectrum as apparently supergranulation scatters waves over a large area of the power spectrum. By picking locations of supergranulation as peaks in the horizontal divergence signal derived from f-mode waves, it is possible to simultaneously obtain average properties of supergranules and a high signal/noise ratio by averaging over many cells. By comparing ray-theory forward modeling with HMI measurements, an average supergranule model with a peak upflow of 240 m/s at cell center at a depth of 2.3 Mm and a peak horizontal outflow of 700 m/s at a depth of 1.6 Mm. This upflow is a factor of 20 larger than the measured photospheric upflow. These results may not be consistent with earlier measurements using much shorter separations (<5 deg heliocentric). With a 30 Mm horizontal extent and a few Mm in depth, the cells might be characterized as thick pancakes.
Editorial ~ Global Diversity of Distance Education
2001-01-01
In a panel presentation at the recent International Council for Open and Distance Education (ICDE) world conference in Dusseldorf, Germany, I had the opportunity to explain the unique role and mission of International Review of Research in Open and Distance Learning (IRRODL) vis – vis our more established sister journals: Open Praxis, Open Learning, Journal of Distance Education, Distance Education, and American Journal of Distance Education. Although all of these journals share a common comm...
The Monge distance between quantum states
Zyczkowski, Karol [Institute for Plasma Research, University of Maryland, College Park, MD (United States); Slomczynski, Wojciech [Instytut Matematyki, Uniwersytet Jagiellonski, Cracow (Poland)
1998-11-13
We define a metric in the space of quantum states taking the Monge distance between corresponding Husimi distributions (Q-functions). This quantity fulfils the axioms of a metric and satisfies the following semiclassical property: the distance between two coherent states is equal to the Euclidean distance between corresponding points in the classical phase space. We compute analytically distances between certain states (coherent, squeezed, Fock and thermal) and discuss a scheme for numerical computation of Monge distance for two arbitrary quantum states. (author)
Oil/gas separator for installation at burning wells
Alonso, C.T.; Bender, D.A.; Bowman, B.R. [and others
1991-12-31
An oil/gas separator is disclosed that can be utilized to return the burning wells in Kuwait to production. Advantageously, a crane is used to install the separator at a safe distance from the well. The gas from the well is burned off at the site, and the oil is immediately pumped into Kuwait`s oil gathering system. Diverters inside the separator prevent the oil jet coming out of the well from reaching the top vents where the gas is burned. The oil falls back down, and is pumped from an annular oil catcher at the bottom of the separator, or from the concrete cellar surrounding the well.
Radiochemical separation of Cobalt
Erkelens, P.C. van
1961-01-01
A method is described for the radiochemical separation of cobalt based on the extraordinary stability of cobalt diethyldithiocarbamate. Interferences are few; only very small amounts of zinc and iron accompany cobalt, which is important in neutron-activation analysis.
Dai, Liang; Schmidt, Fabian
2015-01-01
The separate universe conjecture states that in General Relativity a density perturbation behaves locally (i.e. on scales much smaller than the wavelength of the mode) as a separate universe with different background density and curvature. We prove this conjecture for a spherical compensated tophat density perturbation of arbitrary amplitude and radius in $\\Lambda$CDM. We then use Conformal Fermi Coordinates to generalize this result to scalar perturbations of arbitrary configuration and scale in a general cosmology with a mixture of fluids, but to linear order in perturbations. In this case, the separate universe conjecture holds for the isotropic part of the perturbations. The anisotropic part on the other hand is exactly captured by a tidal field in the Newtonian form. We show that the separate universe picture is restricted to scales larger than the sound horizons of all fluid components. We then derive an expression for the locally measured matter bispectrum induced by a long-wavelength mode of arbitrary...
Electroextraction separation of dyestuffs
Luo, G.S.; Yu, M.J.; Jiang, W.B.; Zhu, S.L.; Dai, Y.Y. [Tsinghua Univ., Beijing (China). Dept. of Chemical Engineering
1999-03-01
Electroseparation technologies have prospects for significant growth well into the next century. Electroextraction, a coupled separation technique of solvent extraction with electrophoresis, was used to remove dyestuffs from their aqueous stream. A study on the characteristics of the separation technique was carried out with n-butanol/acid-chrom blue K/water and n-butanol/methyl blue/water as working systems. A continuous separation equipment was designed and sued in this work. The influences of two-phase flow, field strength, and concentration of the feed on the recovery of solute were studied. The results showed that much higher recovery of solute with less solvent consumption could be achieved by using this technique to remove dyes from their aqueous streams, especially for the separation of the dilute solution. When the field strength is increased, the recovery and mass flux increase. When the feed flow rate and the initial solute concentration are increased, the recovery decreases and the mass flux increases.
Shoulder separation - aftercare
... and top of your shoulder blade A severe shoulder separation You may need surgery right away if you have: Numbness in your fingers Cold fingers Muscle weakness in your arm Severe deformity of the joint
Radiochemical separation of Cobalt
Erkelens, P.C. van
1961-01-01
A method is described for the radiochemical separation of cobalt based on the extraordinary stability of cobalt diethyldithiocarbamate. Interferences are few; only very small amounts of zinc and iron accompany cobalt, which is important in neutron-activation analysis.
Face Recognition using Segmental Euclidean Distance
Farrukh Sayeed
2011-09-01
Full Text Available In this paper an attempt has been made to detect the face using the combination of integral image along with the cascade structured classifier which is built using Adaboost learning algorithm. The detected faces are then passed through a filtering process for discarding the non face regions. They are individually split up into five segments consisting of forehead, eyes, nose, mouth and chin. Each segment is considered as a separate image and Eigenface also called principal component analysis (PCA features of each segment is computed. The faces having a slight pose are also aligned for proper segmentation. The test image is also segmented similarly and its PCA features are found. The segmental Euclidean distance classifier is used for matching the test image with the stored one. The success rate comes out to be 88 per cent on the CG(full database created from the databases of California Institute and Georgia Institute. However the performance of this approach on ORL(full database with the same features is only 70 per cent. For the sake of comparison, DCT(full and fuzzy features are tried on CG and ORL databases but using a well known classifier, support vector machine (SVM. Results of recognition rate with DCT features on SVM classifier are increased by 3 per cent over those due to PCA features and Euclidean distance classifier on the CG database. The results of recognition are improved to 96 per cent with fuzzy features on ORL database with SVM.Defence Science Journal, 2011, 61(5, pp.431-442, DOI:http://dx.doi.org/10.14429/dsj.61.1178
Mundschau, Michael [Longmont, CO; Xie, Xiaobing [Foster City, CA; Evenson, IV, Carl; Grimmer, Paul [Longmont, CO; Wright, Harold [Longmont, CO
2011-05-24
A method for separating a hydrogen-rich product stream from a feed stream comprising hydrogen and at least one carbon-containing gas, comprising feeding the feed stream, at an inlet pressure greater than atmospheric pressure and a temperature greater than 200.degree. C., to a hydrogen separation membrane system comprising a membrane that is selectively permeable to hydrogen, and producing a hydrogen-rich permeate product stream on the permeate side of the membrane and a carbon dioxide-rich product raffinate stream on the raffinate side of the membrane. A method for separating a hydrogen-rich product stream from a feed stream comprising hydrogen and at least one carbon-containing gas, comprising feeding the feed stream, at an inlet pressure greater than atmospheric pressure and a temperature greater than 200.degree. C., to an integrated water gas shift/hydrogen separation membrane system wherein the hydrogen separation membrane system comprises a membrane that is selectively permeable to hydrogen, and producing a hydrogen-rich permeate product stream on the permeate side of the membrane and a carbon dioxide-rich product raffinate stream on the raffinate side of the membrane. A method for pretreating a membrane, comprising: heating the membrane to a desired operating temperature and desired feed pressure in a flow of inert gas for a sufficient time to cause the membrane to mechanically deform; decreasing the feed pressure to approximately ambient pressure; and optionally, flowing an oxidizing agent across the membrane before, during, or after deformation of the membrane. A method of supporting a hydrogen separation membrane system comprising selecting a hydrogen separation membrane system comprising one or more catalyst outer layers deposited on a hydrogen transport membrane layer and sealing the hydrogen separation membrane system to a porous support.
Separation techniques: Chromatography
Coskun, Ozlem
2016-01-01
Chromatography is an important biophysical technique that enables the separation, identification, and purification of the components of a mixture for qualitative and quantitative analysis. Proteins can be purified based on characteristics such as size and shape, total charge, hydrophobic groups present on the surface, and binding capacity with the stationary phase. Four separation techniques based on molecular characteristics and interaction type use mechanisms of ion exchange, surface adsorp...
Distal humeral epiphyseal separation.
Moucha, Calin S; Mason, Dan E
2003-10-01
Distal humeral epiphyseal separation is an uncommon injury that is often misdiagnosed upon initial presentation. To make a timely, correct diagnosis, the treating physician must have a thorough understanding of basic anatomical relationships and an awareness of the existence of this injury. This is a case of a child who sustained a separation of the distal humeral epiphysis, as well as multiple other bony injuries, secondary to child abuse.
Model Selection Through Sparse Maximum Likelihood Estimation
Banerjee, Onureena; D'Aspremont, Alexandre
2007-01-01
We consider the problem of estimating the parameters of a Gaussian or binary distribution in such a way that the resulting undirected graphical model is sparse. Our approach is to solve a maximum likelihood problem with an added l_1-norm penalty term. The problem as formulated is convex but the memory requirements and complexity of existing interior point methods are prohibitive for problems with more than tens of nodes. We present two new algorithms for solving problems with at least a thousand nodes in the Gaussian case. Our first algorithm uses block coordinate descent, and can be interpreted as recursive l_1-norm penalized regression. Our second algorithm, based on Nesterov's first order method, yields a complexity estimate with a better dependence on problem size than existing interior point methods. Using a log determinant relaxation of the log partition function (Wainwright & Jordan (2006)), we show that these same algorithms can be used to solve an approximate sparse maximum likelihood problem for...
Maximum-entropy description of animal movement.
Fleming, Chris H; Subaşı, Yiğit; Calabrese, Justin M
2015-03-01
We introduce a class of maximum-entropy states that naturally includes within it all of the major continuous-time stochastic processes that have been applied to animal movement, including Brownian motion, Ornstein-Uhlenbeck motion, integrated Ornstein-Uhlenbeck motion, a recently discovered hybrid of the previous models, and a new model that describes central-place foraging. We are also able to predict a further hierarchy of new models that will emerge as data quality improves to better resolve the underlying continuity of animal movement. Finally, we also show that Langevin equations must obey a fluctuation-dissipation theorem to generate processes that fall from this class of maximum-entropy distributions when the constraints are purely kinematic.
Pareto versus lognormal: a maximum entropy test.
Bee, Marco; Riccaboni, Massimo; Schiavo, Stefano
2011-08-01
It is commonly found that distributions that seem to be lognormal over a broad range change to a power-law (Pareto) distribution for the last few percentiles. The distributions of many physical, natural, and social events (earthquake size, species abundance, income and wealth, as well as file, city, and firm sizes) display this structure. We present a test for the occurrence of power-law tails in statistical distributions based on maximum entropy. This methodology allows one to identify the true data-generating processes even in the case when it is neither lognormal nor Pareto. The maximum entropy approach is then compared with other widely used methods and applied to different levels of aggregation of complex systems. Our results provide support for the theory that distributions with lognormal body and Pareto tail can be generated as mixtures of lognormally distributed units.
Maximum Variance Hashing via Column Generation
Lei Luo
2013-01-01
item search. Recently, a number of data-dependent methods have been developed, reflecting the great potential of learning for hashing. Inspired by the classic nonlinear dimensionality reduction algorithm—maximum variance unfolding, we propose a novel unsupervised hashing method, named maximum variance hashing, in this work. The idea is to maximize the total variance of the hash codes while preserving the local structure of the training data. To solve the derived optimization problem, we propose a column generation algorithm, which directly learns the binary-valued hash functions. We then extend it using anchor graphs to reduce the computational cost. Experiments on large-scale image datasets demonstrate that the proposed method outperforms state-of-the-art hashing methods in many cases.
The Maximum Resource Bin Packing Problem
Boyar, J.; Epstein, L.; Favrholdt, L.M.
2006-01-01
algorithms, First-Fit-Increasing and First-Fit-Decreasing for the maximum resource variant of classical bin packing. For the on-line variant, we define maximum resource variants of classical and dual bin packing. For dual bin packing, no on-line algorithm is competitive. For classical bin packing, we find......Usually, for bin packing problems, we try to minimize the number of bins used or in the case of the dual bin packing problem, maximize the number or total size of accepted items. This paper presents results for the opposite problems, where we would like to maximize the number of bins used...... the competitive ratio of various natural algorithms. We study the general versions of the problems as well as the parameterized versions where there is an upper bound of on the item sizes, for some integer k....
Nonparametric Maximum Entropy Estimation on Information Diagrams
Martin, Elliot A; Meinke, Alexander; Děchtěrenko, Filip; Davidsen, Jörn
2016-01-01
Maximum entropy estimation is of broad interest for inferring properties of systems across many different disciplines. In this work, we significantly extend a technique we previously introduced for estimating the maximum entropy of a set of random discrete variables when conditioning on bivariate mutual informations and univariate entropies. Specifically, we show how to apply the concept to continuous random variables and vastly expand the types of information-theoretic quantities one can condition on. This allows us to establish a number of significant advantages of our approach over existing ones. Not only does our method perform favorably in the undersampled regime, where existing methods fail, but it also can be dramatically less computationally expensive as the cardinality of the variables increases. In addition, we propose a nonparametric formulation of connected informations and give an illustrative example showing how this agrees with the existing parametric formulation in cases of interest. We furthe...
Zipf's law, power laws and maximum entropy
Visser, Matt
2013-04-01
Zipf's law, and power laws in general, have attracted and continue to attract considerable attention in a wide variety of disciplines—from astronomy to demographics to software structure to economics to linguistics to zoology, and even warfare. A recent model of random group formation (RGF) attempts a general explanation of such phenomena based on Jaynes' notion of maximum entropy applied to a particular choice of cost function. In the present paper I argue that the specific cost function used in the RGF model is in fact unnecessarily complicated, and that power laws can be obtained in a much simpler way by applying maximum entropy ideas directly to the Shannon entropy subject only to a single constraint: that the average of the logarithm of the observable quantity is specified.
Zipf's law, power laws, and maximum entropy
Visser, Matt
2012-01-01
Zipf's law, and power laws in general, have attracted and continue to attract considerable attention in a wide variety of disciplines - from astronomy to demographics to economics to linguistics to zoology, and even warfare. A recent model of random group formation [RGF] attempts a general explanation of such phenomena based on Jaynes' notion of maximum entropy applied to a particular choice of cost function. In the present article I argue that the cost function used in the RGF model is in fact unnecessarily complicated, and that power laws can be obtained in a much simpler way by applying maximum entropy ideas directly to the Shannon entropy subject only to a single constraint: that the average of the logarithm of the observable quantity is specified.
Regions of constrained maximum likelihood parameter identifiability
Lee, C.-H.; Herget, C. J.
1975-01-01
This paper considers the parameter identification problem of general discrete-time, nonlinear, multiple-input/multiple-output dynamic systems with Gaussian-white distributed measurement errors. Knowledge of the system parameterization is assumed to be known. Regions of constrained maximum likelihood (CML) parameter identifiability are established. A computation procedure employing interval arithmetic is proposed for finding explicit regions of parameter identifiability for the case of linear systems. It is shown that if the vector of true parameters is locally CML identifiable, then with probability one, the vector of true parameters is a unique maximal point of the maximum likelihood function in the region of parameter identifiability and the CML estimation sequence will converge to the true parameters.
A Maximum Radius for Habitable Planets.
Alibert, Yann
2015-09-01
We compute the maximum radius a planet can have in order to fulfill two constraints that are likely necessary conditions for habitability: 1- surface temperature and pressure compatible with the existence of liquid water, and 2- no ice layer at the bottom of a putative global ocean, that would prevent the operation of the geologic carbon cycle to operate. We demonstrate that, above a given radius, these two constraints cannot be met: in the Super-Earth mass range (1-12 Mearth), the overall maximum that a planet can have varies between 1.8 and 2.3 Rearth. This radius is reduced when considering planets with higher Fe/Si ratios, and taking into account irradiation effects on the structure of the gas envelope.
Mattig's relation and dynamical distance indicators
Teerikorpi, Pekka
2016-01-01
We discuss how the redshift (Mattig) method in Friedmann cosmology relates to dynamical distance indicators based on Newton's gravity (Teerikorpi 2011). It belongs to the class of indicators where the relevant length inside the system is the distance itself (in this case the proper metric distance). As the Friedmann model has Newtonian analogy, its use to infer distances has instructive similarities to classical dynamical distance indicators. In view of the theoretical exact linear distance-velocity law, we emphasize that it is conceptually correct to derive the cosmological distance via the route: redshift (primarily observed) --> space expansion velocity (not directly observed) --> metric distance (physical length in "cm"). Important properties of the proper metric distance are summarized.
Maximum Profit Configurations of Commercial Engines
Yiran Chen
2011-01-01
An investigation of commercial engines with finite capacity low- and high-price economic subsystems and a generalized commodity transfer law [n ∝ Δ (P m)] in commodity flow processes, in which effects of the price elasticities of supply and demand are introduced, is presented in this paper. Optimal cycle configurations of commercial engines for maximum profit are obtained by applying optimal control theory. In some special cases, the eventual state—market equilibrium—is solely determined by t...
A stochastic maximum principle via Malliavin calculus
Øksendal, Bernt; Zhou, Xun Yu; Meyer-Brandis, Thilo
2008-01-01
This paper considers a controlled It\\^o-L\\'evy process where the information available to the controller is possibly less than the overall information. All the system coefficients and the objective performance functional are allowed to be random, possibly non-Markovian. Malliavin calculus is employed to derive a maximum principle for the optimal control of such a system where the adjoint process is explicitly expressed.
Tissue radiation response with maximum Tsallis entropy.
Sotolongo-Grau, O; Rodríguez-Pérez, D; Antoranz, J C; Sotolongo-Costa, Oscar
2010-10-08
The expression of survival factors for radiation damaged cells is currently based on probabilistic assumptions and experimentally fitted for each tumor, radiation, and conditions. Here, we show how the simplest of these radiobiological models can be derived from the maximum entropy principle of the classical Boltzmann-Gibbs expression. We extend this derivation using the Tsallis entropy and a cutoff hypothesis, motivated by clinical observations. The obtained expression shows a remarkable agreement with the experimental data found in the literature.
Maximum Estrada Index of Bicyclic Graphs
Wang, Long; Wang, Yi
2012-01-01
Let $G$ be a simple graph of order $n$, let $\\lambda_1(G),\\lambda_2(G),...,\\lambda_n(G)$ be the eigenvalues of the adjacency matrix of $G$. The Esrada index of $G$ is defined as $EE(G)=\\sum_{i=1}^{n}e^{\\lambda_i(G)}$. In this paper we determine the unique graph with maximum Estrada index among bicyclic graphs with fixed order.
Maximum privacy without coherence, zero-error
Leung, Debbie; Yu, Nengkun
2016-09-01
We study the possible difference between the quantum and the private capacities of a quantum channel in the zero-error setting. For a family of channels introduced by Leung et al. [Phys. Rev. Lett. 113, 030512 (2014)], we demonstrate an extreme difference: the zero-error quantum capacity is zero, whereas the zero-error private capacity is maximum given the quantum output dimension.
de Grijs, Richard; Bono, Giuseppe
2014-01-01
The distance to the Large Magellanic Cloud (LMC) represents a key local rung of the extragalactic distance ladder. Yet, the galaxy's distance modulus has long been an issue of contention, in particular in view of claims that most newly determined distance moduli cluster tightly - and with a small spread - around the "canonical" distance modulus, (m-M)_0 = 18.50 mag. We compiled 233 separate LMC distance determinations published between 1990 and 2013. Our analysis of the individual distance moduli, as well as of their two-year means and standard deviations resulting from this largest data set of LMC distance moduli available to date, focuses specifically on Cepheid and RR Lyrae variable-star tracer populations, as well as on distance estimates based on features in the observational Hertzsprung-Russell diagram. We conclude that strong publication bias is unlikely to have been the main driver of the majority of published LMC distance moduli. However, for a given distance tracer, the body of publications leading ...
An overview on distance and pseudo distance functions and their applications
ZHU Xiangyang; DING Han; ZHONG Binglin; XIONG Youlun
2003-01-01
The fast and accurate collision detection and distance calculation between geometric models is fundamental in robotics, manufacturing and computer-simulated environments. This paper surveys the state of the art in the theory and algorithms of distance and pseudo distance functions between convex sets. An overview on the existing results, including fast algorithms for distance calculation, definitions and properties of various pseudo distance functions (the J-function, the growth distance, and the pseudo minimum translational distance), is presented. The distance and pseudo distance functions are versatile in a wide range of areas. Their applications in robot motion planning, grasp analysis/synthesis, form error evaluation, and engineering optimization is demonstrated.
Efficient Indoor Proximity and Separation Detection for Location Fingerprinting
Kjærgaard, Mikkel Baun; Treu, Georg; Ruppel, Peter
2008-01-01
Detecting proximity and separation among mobile targets is a basic mechanism for many location-based services (LBSs) and requires continuous positioning and tracking. However, realizing both mechanisms for indoor usage is still a major challenge. Positioning methods like GPS cannot be applied there......, and for distance calculations the particular building topology has to be taken into account. To address these challenges, this paper presents a novel approach for indoor proximity and separation detection, which uses location fingerprinting for indoor positioning of targets and walking distances for modeling...
Automatic maximum entropy spectral reconstruction in NMR.
Mobli, Mehdi; Maciejewski, Mark W; Gryk, Michael R; Hoch, Jeffrey C
2007-10-01
Developments in superconducting magnets, cryogenic probes, isotope labeling strategies, and sophisticated pulse sequences together have enabled the application, in principle, of high-resolution NMR spectroscopy to biomolecular systems approaching 1 megadalton. In practice, however, conventional approaches to NMR that utilize the fast Fourier transform, which require data collected at uniform time intervals, result in prohibitively lengthy data collection times in order to achieve the full resolution afforded by high field magnets. A variety of approaches that involve nonuniform sampling have been proposed, each utilizing a non-Fourier method of spectrum analysis. A very general non-Fourier method that is capable of utilizing data collected using any of the proposed nonuniform sampling strategies is maximum entropy reconstruction. A limiting factor in the adoption of maximum entropy reconstruction in NMR has been the need to specify non-intuitive parameters. Here we describe a fully automated system for maximum entropy reconstruction that requires no user-specified parameters. A web-accessible script generator provides the user interface to the system.
Maximum entropy analysis of cosmic ray composition
Nosek, Dalibor; Vícha, Jakub; Trávníček, Petr; Nosková, Jana
2016-01-01
We focus on the primary composition of cosmic rays with the highest energies that cause extensive air showers in the Earth's atmosphere. A way of examining the two lowest order moments of the sample distribution of the depth of shower maximum is presented. The aim is to show that useful information about the composition of the primary beam can be inferred with limited knowledge we have about processes underlying these observations. In order to describe how the moments of the depth of shower maximum depend on the type of primary particles and their energies, we utilize a superposition model. Using the principle of maximum entropy, we are able to determine what trends in the primary composition are consistent with the input data, while relying on a limited amount of information from shower physics. Some capabilities and limitations of the proposed method are discussed. In order to achieve a realistic description of the primary mass composition, we pay special attention to the choice of the parameters of the sup...
A Maximum Resonant Set of Polyomino Graphs
Zhang Heping
2016-05-01
Full Text Available A polyomino graph P is a connected finite subgraph of the infinite plane grid such that each finite face is surrounded by a regular square of side length one and each edge belongs to at least one square. A dimer covering of P corresponds to a perfect matching. Different dimer coverings can interact via an alternating cycle (or square with respect to them. A set of disjoint squares of P is a resonant set if P has a perfect matching M so that each one of those squares is M-alternating. In this paper, we show that if K is a maximum resonant set of P, then P − K has a unique perfect matching. We further prove that the maximum forcing number of a polyomino graph is equal to the cardinality of a maximum resonant set. This confirms a conjecture of Xu et al. [26]. We also show that if K is a maximal alternating set of P, then P − K has a unique perfect matching.
The maximum rate of mammal evolution
Evans, Alistair R.; Jones, David; Boyer, Alison G.; Brown, James H.; Costa, Daniel P.; Ernest, S. K. Morgan; Fitzgerald, Erich M. G.; Fortelius, Mikael; Gittleman, John L.; Hamilton, Marcus J.; Harding, Larisa E.; Lintulaakso, Kari; Lyons, S. Kathleen; Okie, Jordan G.; Saarinen, Juha J.; Sibly, Richard M.; Smith, Felisa A.; Stephens, Patrick R.; Theodor, Jessica M.; Uhen, Mark D.
2012-03-01
How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous-Paleogene (K-Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes.
Minimal Length, Friedmann Equations and Maximum Density
Awad, Adel
2014-01-01
Inspired by Jacobson's thermodynamic approach[gr-qc/9504004], Cai et al [hep-th/0501055,hep-th/0609128] have shown the emergence of Friedmann equations from the first law of thermodynamics. We extend Akbar--Cai derivation [hep-th/0609128] of Friedmann equations to accommodate a general entropy-area law. Studying the resulted Friedmann equations using a specific entropy-area law, which is motivated by the generalized uncertainty principle (GUP), reveals the existence of a maximum energy density closed to Planck density. Allowing for a general continuous pressure $p(\\rho,a)$ leads to bounded curvature invariants and a general nonsingular evolution. In this case, the maximum energy density is reached in a finite time and there is no cosmological evolution beyond this point which leaves the big bang singularity inaccessible from a spacetime prospective. The existence of maximum energy density and a general nonsingular evolution is independent of the equation of state and the spacial curvature $k$. As an example w...
Maximum saliency bias in binocular fusion
Lu, Yuhao; Stafford, Tom; Fox, Charles
2016-07-01
Subjective experience at any instant consists of a single ("unitary"), coherent interpretation of sense data rather than a "Bayesian blur" of alternatives. However, computation of Bayes-optimal actions has no role for unitary perception, instead being required to integrate over every possible action-percept pair to maximise expected utility. So what is the role of unitary coherent percepts, and how are they computed? Recent work provided objective evidence for non-Bayes-optimal, unitary coherent, perception and action in humans; and further suggested that the percept selected is not the maximum a posteriori percept but is instead affected by utility. The present study uses a binocular fusion task first to reproduce the same effect in a new domain, and second, to test multiple hypotheses about exactly how utility may affect the percept. After accounting for high experimental noise, it finds that both Bayes optimality (maximise expected utility) and the previously proposed maximum-utility hypothesis are outperformed in fitting the data by a modified maximum-salience hypothesis, using unsigned utility magnitudes in place of signed utilities in the bias function.
The maximum rate of mammal evolution
Evans, Alistair R.; Jones, David; Boyer, Alison G.; Brown, James H.; Costa, Daniel P.; Ernest, S. K. Morgan; Fitzgerald, Erich M. G.; Fortelius, Mikael; Gittleman, John L.; Hamilton, Marcus J.; Harding, Larisa E.; Lintulaakso, Kari; Lyons, S. Kathleen; Okie, Jordan G.; Saarinen, Juha J.; Sibly, Richard M.; Smith, Felisa A.; Stephens, Patrick R.; Theodor, Jessica M.; Uhen, Mark D.
2012-01-01
How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous–Paleogene (K–Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes. PMID:22308461
Maximum-biomass prediction of homofermentative Lactobacillus.
Cui, Shumao; Zhao, Jianxin; Liu, Xiaoming; Chen, Yong Q; Zhang, Hao; Chen, Wei
2016-07-01
Fed-batch and pH-controlled cultures have been widely used for industrial production of probiotics. The aim of this study was to systematically investigate the relationship between the maximum biomass of different homofermentative Lactobacillus and lactate accumulation, and to develop a prediction equation for the maximum biomass concentration in such cultures. The accumulation of the end products and the depletion of nutrients by various strains were evaluated. In addition, the minimum inhibitory concentrations (MICs) of acid anions for various strains at pH 7.0 were examined. The lactate concentration at the point of complete inhibition was not significantly different from the MIC of lactate for all of the strains, although the inhibition mechanism of lactate and acetate on Lactobacillus rhamnosus was different from the other strains which were inhibited by the osmotic pressure caused by acid anions at pH 7.0. When the lactate concentration accumulated to the MIC, the strains stopped growing. The maximum biomass was closely related to the biomass yield per unit of lactate produced (YX/P) and the MIC (C) of lactate for different homofermentative Lactobacillus. Based on the experimental data obtained using different homofermentative Lactobacillus, a prediction equation was established as follows: Xmax - X0 = (0.59 ± 0.02)·YX/P·C.
The maximum rate of mammal evolution.
Evans, Alistair R; Jones, David; Boyer, Alison G; Brown, James H; Costa, Daniel P; Ernest, S K Morgan; Fitzgerald, Erich M G; Fortelius, Mikael; Gittleman, John L; Hamilton, Marcus J; Harding, Larisa E; Lintulaakso, Kari; Lyons, S Kathleen; Okie, Jordan G; Saarinen, Juha J; Sibly, Richard M; Smith, Felisa A; Stephens, Patrick R; Theodor, Jessica M; Uhen, Mark D
2012-03-13
How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous-Paleogene (K-Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes.
Distance Measurement Solves Astrophysical Mysteries
2003-08-01
Location, location, and location. The old real-estate adage about what's really important proved applicable to astrophysics as astronomers used the sharp radio "vision" of the National Science Foundation's Very Long Baseline Array (VLBA) to pinpoint the distance to a pulsar. Their accurate distance measurement then resolved a dispute over the pulsar's birthplace, allowed the astronomers to determine the size of its neutron star and possibly solve a mystery about cosmic rays. "Getting an accurate distance to this pulsar gave us a real bonanza," said Walter Brisken, of the National Radio Astronomy Observatory (NRAO) in Socorro, NM. Monogem Ring The Monogem Ring, in X-Ray Image by ROSAT satellite CREDIT: Max-Planck Institute, American Astronomical Society (Click on Image for Larger Version) The pulsar, called PSR B0656+14, is in the constellation Gemini, and appears to be near the center of a circular supernova remnant that straddles Gemini and its neighboring constellation, Monoceros, and is thus called the Monogem Ring. Since pulsars are superdense, spinning neutron stars left over when a massive star explodes as a supernova, it was logical to assume that the Monogem Ring, the shell of debris from a supernova explosion, was the remnant of the blast that created the pulsar. However, astronomers using indirect methods of determining the distance to the pulsar had concluded that it was nearly 2500 light-years from Earth. On the other hand, the supernova remnant was determined to be only about 1000 light-years from Earth. It seemed unlikely that the two were related, but instead appeared nearby in the sky purely by a chance juxtaposition. Brisken and his colleagues used the VLBA to make precise measurements of the sky position of PSR B0656+14 from 2000 to 2002. They were able to detect the slight offset in the object's apparent position when viewed from opposite sides of Earth's orbit around the Sun. This effect, called parallax, provides a direct measurement of
Variable Distance Angular Symbology Reader
Schramm, Harry F., Jr. (Inventor); Corder, Eric L. (Inventor)
2006-01-01
A variable distance angular symbology, reader utilizes at least one light source to direct light through a beam splitter and onto a target. A target may be angled relative to the impinging light beam up to and maybe even greater than 45deg. A reflected beam from the target passes through the beam splitter and is preferably directed 90deg relative to the light source through a telecentric lens to a scanner which records an image of the target such as a direct part marking code.
Moroz, Adam
2009-06-11
The maximum energy dissipation principle is employed to nonlinear chemical thermodynamics in terms of distance variable (generalized displacement) from the global equilibrium, applying the optimal control interpretation to develop a variational formulation. The cost-like functional was chosen to support the suggestion that such a formulation corresponds to the maximum energy dissipation principle. Using this approach, the variational framework was proposed for a nonlinear chemical thermodynamics, including a general cooperative kinetics model. The formulation is in good agreement with standard linear nonequilibrium chemical thermodynamics.
Ultrasound monitoring of inter-knee distances during gait.
Lai, Daniel T H; Wrigley, Tim V; Palaniswami, M
2009-01-01
Knee osteoarthritis is an extremely common, debilitating disease associated with pain and loss of function. There is considerable interest in monitoring lower limb alignment due to its close association with joint overload leading to disease progression. The effects of gait modifications that can lower joint loading are of particular interest. Here we describe an ultrasound-based system for monitoring an important aspect of dynamic lower limb alignment, the inter-knee distance during walking. Monitoring this gait parameter should facilitate studies in reducing knee loading, a primary risk factor of knee osteoarthritis progression. The portable device is composed of an ultrasound sensor connected to an Intel iMote2 equipped with Bluetooth wireless capability. Static tests and calibration results show that the sensor possesses an effective beam envelope of 120 degrees, with maximum distance errors of 10% at the envelope edges. Dynamic walking trials reveal close correlation of inter-knee distance trends between that measured by an optical system (Optotrak Certus NDI) and the sensor device. The maximum average root mean square error was found to be 1.46 cm. Future work will focus on improving the accuracy of the device.
Anxiety and Resistance in Distance Learning
Nazime Tuncay
2010-06-01
Full Text Available The purpose of this study was to investigate students' anxiety and resistance towards learning through distance education.Specifically, the study sought answers to the following questions: -What are the reasons of students not choosing distancelearning courses? -Which symptoms of anxiety, if any, do distance learner’s exhibit towards distance learning? Does genderhave any significant relationships with distance learners' perception of factors that affect their anxiety and resistance? A totalof 120 distance education students in Near East University were observed and 96 of them were interviewed. Computer anxiety,language anxiety, social anxiety were observed to be among the reasons of students’ resistance to distance learning.
A note on the path interval distance.
Coons, Jane Ivy; Rusinko, Joseph
2016-06-01
The path interval distance accounts for global congruence between locally incongruent trees. We show that the path interval distance provides a lower bound for the nearest neighbor interchange distance. In contrast to the Robinson-Foulds distance, random pairs of trees are unlikely to be maximally distant from one another under the path interval distance. These features indicate that the path interval distance should play a role in phylogenomics where the comparison of trees on a fixed set of taxa is becoming increasingly important.
Lightweight Distance Bounding Protocol against Relay Attacks
Kim, Jin Seok; Cho, Kookrae; Yum, Dae Hyun; Hong, Sung Je; Lee, Pil Joong
Traditional authentication protocols are based on cryptographic techniques to achieve identity verification. Distance bounding protocols are an enhanced type of authentication protocol built upon both signal traversal time measurement and cryptographic techniques to accomplish distance verification as well as identity verification. A distance bounding protocol is usually designed to defend against the relay attack and the distance fraud attack. As there are applications to which the distance fraud attack is not a serious threat, we propose a streamlined distance bounding protocol that focuses on the relay attack. The proposed protocol is more efficient than previous protocols and has a low false acceptance rate under the relay attack.
Organic Separation Test Results
Russell, Renee L.; Rinehart, Donald E.; Peterson, Reid A.
2014-09-22
Separable organics have been defined as “those organic compounds of very limited solubility in the bulk waste and that can form a separate liquid phase or layer” (Smalley and Nguyen 2013), and result from three main solvent extraction processes: U Plant Uranium Recovery Process, B Plant Waste Fractionation Process, and Plutonium Uranium Extraction (PUREX) Process. The primary organic solvents associated with tank solids are TBP, D2EHPA, and NPH. There is concern that, while this organic material is bound to the sludge particles as it is stored in the tanks, waste feed delivery activities, specifically transfer pump and mixer pump operations, could cause the organics to form a separated layer in the tank farms feed tank. Therefore, Washington River Protection Solutions (WRPS) is experimentally evaluating the potential of organic solvents separating from the tank solids (sludge) during waste feed delivery activities, specifically the waste mixing and transfer processes. Given the Hanford Tank Waste Treatment and Immobilization Plant (WTP) waste acceptance criteria per the Waste Feed Acceptance Criteria document (24590-WTP-RPT-MGT-11-014) that there is to be “no visible layer” of separable organics in the waste feed, this would result in the batch being unacceptable to transfer to WTP. This study is of particular importance to WRPS because of these WTP requirements.
Gulf stream separation dynamics
Schoonover, Joseph
Climate models currently struggle with the more traditional, coarse ( O(100 km) ) representation of the ocean. In these coarse ocean simulations, western boundary currents are notoriously difficult to model accurately. The modeled Gulf Stream is typically seen exhibiting a mean pathway that is north of observations, and is linked to a warm sea-surface temperature bias in the Mid-Atlantic Bight. Although increased resolution ( O(10 km) ) improves the modeled Gulf Stream position, there is no clean recipe for obtaining the proper pathway. The 70 year history of literature on the Gulf Stream separation suggests that we have not reached a resolution on the dynamics that control the current's pathway just south of the Mid-Atlantic Bight. Without a concrete knowledge on the separation dynamics, we cannot provide a clean recipe for accurately modeling the Gulf Stream at increased resolutions. Further, any reliable parameterization that yields a realistic Gulf Stream path must express the proper physics of separation. The goal of this dissertation is to determine what controls the Gulf Stream separation. To do so, we examine the results of a model intercomparison study and a set of numerical regional terraforming experiments. It is argued that the separation is governed by local dynamics that are most sensitive to the steepening of the continental shelf, consistent with the topographic wave arrest hypothesis of Stern (1998). A linear extension of Stern's theory is provided, which illustrates that wave arrest is possible for a continuously stratified fluid.
Separably injective Banach spaces
Avilés, Antonio; Castillo, Jesús M F; González, Manuel; Moreno, Yolanda
2016-01-01
This monograph contains a detailed exposition of the up-to-date theory of separably injective spaces: new and old results are put into perspective with concrete examples (such as l∞/c0 and C(K) spaces, where K is a finite height compact space or an F-space, ultrapowers of L∞ spaces and spaces of universal disposition). It is no exaggeration to say that the theory of separably injective Banach spaces is strikingly different from that of injective spaces. For instance, separably injective Banach spaces are not necessarily isometric to, or complemented subspaces of, spaces of continuous functions on a compact space. Moreover, in contrast to the scarcity of examples and general results concerning injective spaces, we know of many different types of separably injective spaces and there is a rich theory around them. The monograph is completed with a preparatory chapter on injective spaces, a chapter on higher cardinal versions of separable injectivity and a lively discussion of open problems and further lines o...
Maximum Bipartite Matching Size And Application to Cuckoo Hashing
Kanizo, Yossi; Keslassy, Isaac
2010-01-01
Cuckoo hashing with a stash is a robust high-performance hashing scheme that can be used in many real-life applications. It complements cuckoo hashing by adding a small stash storing the elements that cannot fit into the main hash table due to collisions. However, the exact required size of the stash and the tradeoff between its size and the memory over-provisioning of the hash table are still unknown. We settle this question by investigating the equivalent maximum matching size of a random bipartite graph, with a constant left-side vertex degree $d=2$. Specifically, we provide an exact expression for the expected maximum matching size and show that its actual size is close to its mean, with high probability. This result relies on decomposing the bipartite graph into connected components, and then separately evaluating the distribution of the matching size in each of these components. In particular, we provide an exact expression for any finite bipartite graph size and also deduce asymptotic results as the nu...
Applying rough sets in word segmentation disambiguation based on maximum entropy model
无
2006-01-01
To solve the complicated feature extraction and long distance dependency problem in Word Segmentation Disambiguation ( WSD), this paper proposes to apply rough sets in WSD based on the Maximum Entropy model. Firstly, rough set theory is applied to extract the complicated features and long distance features, even from noise or inconsistent corpus. Secondly, these features are added into the Maximum Entropy model, and consequently, the feature weights can be assigned according to the performance of the whole disambiguation model. Finally, the semantic lexicon is adopted to build class-based rough set features to overcome data sparseness. The experiment indicated that our method performed better than previous models, which got top rank in WSD in 863 Evaluation in 2003. This system ranked first and second respectively in MSR and PKU open test in the Second International Chinese Word Segmentation Bakeoff held in 2005.
Maximum hardness and minimum polarizability principles through lattice energies of ionic compounds
Kaya, Savaş, E-mail: savaskaya@cumhuriyet.edu.tr [Department of Chemistry, Faculty of Science, Cumhuriyet University, Sivas 58140 (Turkey); Kaya, Cemal, E-mail: kaya@cumhuriyet.edu.tr [Department of Chemistry, Faculty of Science, Cumhuriyet University, Sivas 58140 (Turkey); Islam, Nazmul, E-mail: nazmul.islam786@gmail.com [Theoretical and Computational Chemistry Research Laboratory, Department of Basic Science and Humanities/Chemistry Techno Global-Balurghat, Balurghat, D. Dinajpur 733103 (India)
2016-03-15
The maximum hardness (MHP) and minimum polarizability (MPP) principles have been analyzed using the relationship among the lattice energies of ionic compounds with their electronegativities, chemical hardnesses and electrophilicities. Lattice energy, electronegativity, chemical hardness and electrophilicity values of ionic compounds considered in the present study have been calculated using new equations derived by some of the authors in recent years. For 4 simple reactions, the changes of the hardness (Δη), polarizability (Δα) and electrophilicity index (Δω) were calculated. It is shown that the maximum hardness principle is obeyed by all chemical reactions but minimum polarizability principles and minimum electrophilicity principle are not valid for all reactions. We also proposed simple methods to compute the percentage of ionic characters and inter nuclear distances of ionic compounds. Comparative studies with experimental sets of data reveal that the proposed methods of computation of the percentage of ionic characters and inter nuclear distances of ionic compounds are valid.
Healthy adults maximum oxygen uptake prediction from a six minute walking test
Nury Nusdwinuringtyas
2011-08-01
Full Text Available Background: A parameter is needed in medical activities or services to determine functional capacity. This study is aimed to produce functional capacity parameter for Indonesian adult as maximum O2.Methods: This study used 123 Indonesian healthy adult subjects (58 males and 65 females with a sedentary lifestyle, using a cross-sectional method.Results: Designed by using the followings: distance, body height, body weight, sex, age, maximum heart rate of six minute walking test and lung capacity (FEV and FVC, the study revealed a good correlation (except body weight with maximum O2. Three new formulas were proposed, which consisted of eight, six, and five variable respectively. Test of the new formula gave result of maximum O2 that is relevant to the golden standard maximum O2 using Cosmed® C-Pex.Conclusion: The Nury formula is the appropriate predictor of maximum oxygen uptake for healthy Indonesians adult as it is designed using Indonesian subjects (Mongoloid compared to the Cahalin’s formula (Caucasian. The Nury formula which consists of five variables is more applicable because it does not require any measurement tools neither specific competency. (Med J Indones 2011;20:195-200Keywords: maximum O2, Nury’s formula, six minute walking test
Mass Separation by Metamaterials.
Restrepo-Flórez, Juan Manuel; Maldovan, Martin
2016-02-25
Being able to manipulate mass flow is critically important in a variety of physical processes in chemical and biomolecular science. For example, separation and catalytic systems, which requires precise control of mass diffusion, are crucial in the manufacturing of chemicals, crystal growth of semiconductors, waste recovery of biological solutes or chemicals, and production of artificial kidneys. Coordinate transformations and metamaterials are powerful methods to achieve precise manipulation of molecular diffusion. Here, we introduce a novel approach to obtain mass separation based on metamaterials that can sort chemical and biomolecular species by cloaking one compound while concentrating the other. A design strategy to realize such metamaterial using homogeneous isotropic materials is proposed. We present a practical case where a mixture of oxygen and nitrogen is manipulated using a metamaterial that cloaks nitrogen and concentrates oxygen. This work lays the foundation for molecular mass separation in biophysical and chemical systems through metamaterial devices.
Arshinoff, S A
1999-04-01
Phaco slice and separate retains the advantages of the chopping techniques of Nagahara, Koch, and Fukasaku but replaces chopping or snapping with slicing across the center of the phaco-tip-stabilized nucleus using a Nagahara chopper and then repositioning the chopper to optimally separate the divided lens halves. As the lens is rotated in the capsular bag, small pieces of the nuclear pie are sliced off, separated, emulsified, and aspirated. Emulsification and aspiration can alternatively be left until most or all the slices have been made. This technique works with a broader range of lens densities than other chopping techniques and uses no sculpting and very little phaco time. The phaco time required for this technique is relatively independent of nuclear density compared with a sculpting technique.
Membrane separation of hydrocarbons
Chang, Y. Alice; Kulkarni, Sudhir S.; Funk, Edward W.
1986-01-01
Mixtures of heavy oils and light hydrocarbons may be separated by passing the mixture through a polymeric membrane. The membrane which is utilized to effect the separation comprises a polymer which is capable of maintaining its integrity in the presence of hydrocarbon compounds and which has been modified by being subjected to the action of a sulfonating agent. Sulfonating agents which may be employed will include fuming sulfuric acid, chlorosulfonic acid, sulfur trioxide, etc., the surface or bulk modified polymer will contain a degree of sulfonation ranging from about 15 to about 50%. The separation process is effected at temperatures ranging from about ambient to about 100.degree. C. and pressures ranging from about 50 to about 1000 psig.
Long distance runners present upregulated sweating responses than sedentary counterparts.
Jeong-Beom Lee
Full Text Available Relatively few studies have investigated peripheral sweating mechanisms of long-distance runners. The aim of this study was to compare peripheral sweating mechanisms in male long-distance runners, and sedentary counterparts. Thirty six subjects, including 20 sedentary controls and 16 long-distance runners (with 7-12 years of athletic training, average 9.2±2.1 years were observed. Quantitative sudomotor axon reflex testing (QSART with iontophoresis (2 mA for 5 min and 10% acetylcholine (ACh were performed to determine axon reflex-mediated and directly activated (DIR, muscarinic receptor sweating. Sweat onset time, sweat rate, number of activated sweat glands, sweat output per gland and skin temperature were measured at rest while maximum oxygen uptake (VO2max were measured during maximal cycling. Sweat rate, activated sweat glands, sweat output per gland, skin temperature and VO2max were significantly higher in the trained runners than in the sedentary controls. Sweat onset time was significantly shorter for the runners. In the group of long-distance runners, significant correlations were found between VO2max and sweat onset time (r2 = 0.543, P<0.01, n = 16, DIR sweat rate (r2 = 0.584, P<0.001, n = 16, sweat output per gland (r2 = 0.539, P<0.01, n = 16. There was no correlation between VO2max and activated sweat glands. These findings suggest that habitual long-distance running results in upregulation of the peripheral sweating mechanisms in humans. Additional research is needed to determine the molecular mechanism underlying these changes. These findings complement the existing sweating data in long-distance runners.
Long-distance seed dispersal by straw-coloured fruit bats varies by season and landscape
Michael Abedi-Lartey
2016-07-01
Full Text Available On-going fragmentation of tropical forest ecosystems and associated depletion of seed dispersers threatens the long-term survival of animal-dispersed plants. These threats do not only affect biodiversity and species abundance, but ultimately ecosystem functions and services. Thus, seed dispersers such as the straw-coloured fruit bat, E. helvum, which traverse long distances across fragmented landscapes, are particularly important for maintaining genetic connectivity and colonizing new sites for plant species. Using high-resolution GPS-tracking of movements, field observations and gut retention experiments, we quantify dispersal distances for small- and large-seeded fruits foraged by E. helvum during periods of colony population low (wet season and high (dry season in an urban and a rural landscape in the forest zone of Ghana. Gut passage time averaged 116 min (range 4–1143 min, comparable to other fruit bats. Movements were generally longer in the urban than in the rural landscape and also longer in the dry than in the wet season. As the majority of seeds are dispersed only to feeding roosts, median dispersal distances were similar for both large (42–67 m and small (42–65 m seeds. However, small seeds were potentially dispersed up to 75.4 km, four times further than the previous maximum distance estimated for a similar-sized frugivore. Maximum seed dispersal distances for small seeds were almost twice as long in the rural (49.7 km compare to the urban (31.2 km landscape. Within the urban landscape, estimated maximum dispersal distances for small seeds were three times longer during the dry season (75.4 km compared to the wet season (22.8 km; in contrast, distances in the rural landscape were three times longer in the wet season (67 km compared to the dry season (24.4. Dispersal distances for large seeds during the dry season (551 m in the rural landscape were almost twice that in the wet season (319 m. We found no influence of food
Schell, William J.
1979-01-01
A dry, fabric supported, polymeric gas separation membrane, such as cellulose acetate, is prepared by casting a solution of the polymer onto a shrinkable fabric preferably formed of synthetic polymers such as polyester or polyamide filaments before washing, stretching or calendering (so called griege goods). The supported membrane is then subjected to gelling, annealing, and drying by solvent exchange. During the processing steps, both the fabric support and the membrane shrink a preselected, controlled amount which prevents curling, wrinkling or cracking of the membrane in flat form or when spirally wound into a gas separation element.
Separation membrane development
Lee, M.W. [Savannah River Technology Center, Aiken, SC (United States)
1998-08-01
A ceramic membrane has been developed to separate hydrogen from other gases. The method used is a sol-gel process. A thin layer of dense ceramic material is coated on a coarse ceramic filter substrate. The pore size distribution in the thin layer is controlled by a densification of the coating materials by heat treatment. The membrane has been tested by permeation measurement of the hydrogen and other gases. Selectivity of the membrane has been achieved to separate hydrogen from carbon monoxide. The permeation rate of hydrogen through the ceramic membrane was about 20 times larger than Pd-Ag membrane.
Separation techniques: Chromatography
Coskun, Ozlem
2016-01-01
Chromatography is an important biophysical technique that enables the separation, identification, and purification of the components of a mixture for qualitative and quantitative analysis. Proteins can be purified based on characteristics such as size and shape, total charge, hydrophobic groups present on the surface, and binding capacity with the stationary phase. Four separation techniques based on molecular characteristics and interaction type use mechanisms of ion exchange, surface adsorption, partition, and size exclusion. Other chromatography techniques are based on the stationary bed, including column, thin layer, and paper chromatography. Column chromatography is one of the most common methods of protein purification. PMID:28058406
Separators for electrochemical cells
Carlson, Steven Allen; Anakor, Ifenna Kingsley
2014-11-11
Provided are separators for use in an electrochemical cell comprising (a) an inorganic oxide and (b) an organic polymer, wherein the inorganic oxide comprises organic substituents. Preferably, the inorganic oxide comprises an hydrated aluminum oxide of the formula Al.sub.2O.sub.3.xH.sub.2O, wherein x is less than 1.0, and wherein the hydrated aluminum oxide comprises organic substituents, preferably comprising a reaction product of a multifunctional monomer and/or organic carbonate with an aluminum oxide, such as pseudo-boehmite and an aluminum oxide. Also provided are electrochemical cells comprising such separators.
Aesthetic Response and Cosmic Aesthetic Distance
Madacsi, D.
2013-04-01
For Homo sapiens, the experience of a primal aesthetic response to nature was perhaps a necessary precursor to the arousal of an artistic impulse. Among the likely visual candidates for primal initiators of aesthetic response, arguments can be made in favor of the flower, the human face and form, and the sky and light itself as primordial aesthetic stimulants. Although visual perception of the sensory world of flowers and human faces and forms is mediated by light, it was most certainly in the sky that humans first could respond to the beauty of light per se. It is clear that as a species we do not yet identify and comprehend as nature, or part of nature, the entire universe beyond our terrestrial environs, the universe from which we remain inexorably separated by space and time. However, we now enjoy a technologically-enabled opportunity to probe the ultimate limits of visual aesthetic distance and the origins of human aesthetic response as we remotely explore deep space via the Hubble Space Telescope and its successors.
Three-Distance Sequences with Three Symbols
SAKAMOTO, Kuniko
2003-01-01
We will show that every $3$ dimensional cutting sequence is a three-distance sequence, and there are uncountable many periodic or aperiodic three-distance sequences (with $3$-symbols) which are not $3$ dimensional cutting sequences.
A Cognitively Grounded Measure of Pronunciation Distance
Wieling, M.; Nerbonne, J.; Bloem, J.; Gooskens, C.; Heeringa, W.; Baayen, R.H.
2014-01-01
In this study we develop pronunciation distances based on naive discriminative learning (NDL). Measures of pronunciation distance are used in several subfields of linguistics, including psycholinguistics, dialectology and typology. In contrast to the commonly used Levenshtein algorithm, NDL is groun
Maximum power operation of interacting molecular motors
Golubeva, Natalia; Imparato, Alberto
2013-01-01
We study the mechanical and thermodynamic properties of different traffic models for kinesin which are relevant in biological and experimental contexts. We find that motor-motor interactions play a fundamental role by enhancing the thermodynamic efficiency at maximum power of the motors......, as compared to the non-interacting system, in a wide range of biologically compatible scenarios. We furthermore consider the case where the motor-motor interaction directly affects the internal chemical cycle and investigate the effect on the system dynamics and thermodynamics....
Maximum a posteriori decoder for digital communications
Altes, Richard A. (Inventor)
1997-01-01
A system and method for decoding by identification of the most likely phase coded signal corresponding to received data. The present invention has particular application to communication with signals that experience spurious random phase perturbations. The generalized estimator-correlator uses a maximum a posteriori (MAP) estimator to generate phase estimates for correlation with incoming data samples and for correlation with mean phases indicative of unique hypothesized signals. The result is a MAP likelihood statistic for each hypothesized transmission, wherein the highest value statistic identifies the transmitted signal.
The sun and heliosphere at solar maximum.
Smith, E J; Marsden, R G; Balogh, A; Gloeckler, G; Geiss, J; McComas, D J; McKibben, R B; MacDowall, R J; Lanzerotti, L J; Krupp, N; Krueger, H; Landgraf, M
2003-11-14
Recent Ulysses observations from the Sun's equator to the poles reveal fundamental properties of the three-dimensional heliosphere at the maximum in solar activity. The heliospheric magnetic field originates from a magnetic dipole oriented nearly perpendicular to, instead of nearly parallel to, the Sun's rotation axis. Magnetic fields, solar wind, and energetic charged particles from low-latitude sources reach all latitudes, including the polar caps. The very fast high-latitude wind and polar coronal holes disappear and reappear together. Solar wind speed continues to be inversely correlated with coronal temperature. The cosmic ray flux is reduced symmetrically at all latitudes.
Conductivity maximum in a charged colloidal suspension
Bastea, S
2009-01-27
Molecular dynamics simulations of a charged colloidal suspension in the salt-free regime show that the system exhibits an electrical conductivity maximum as a function of colloid charge. We attribute this behavior to two main competing effects: colloid effective charge saturation due to counterion 'condensation' and diffusion slowdown due to the relaxation effect. In agreement with previous observations, we also find that the effective transported charge is larger than the one determined by the Stern layer and suggest that it corresponds to the boundary fluid layer at the surface of the colloidal particles.
Maximum entropy signal restoration with linear programming
Mastin, G.A.; Hanson, R.J.
1988-05-01
Dantzig's bounded-variable method is used to express the maximum entropy restoration problem as a linear programming problem. This is done by approximating the nonlinear objective function with piecewise linear segments, then bounding the variables as a function of the number of segments used. The use of a linear programming approach allows equality constraints found in the traditional Lagrange multiplier method to be relaxed. A robust revised simplex algorithm is used to implement the restoration. Experimental results from 128- and 512-point signal restorations are presented.
COMPARISON BETWEEN FORMULAS OF MAXIMUM SHIP SQUAT
PETRU SERGIU SERBAN
2016-06-01
Full Text Available Ship squat is a combined effect of ship’s draft and trim increase due to ship motion in limited navigation conditions. Over time, researchers conducted tests on models and ships to find a mathematical formula that can define squat. Various forms of calculating squat can be found in the literature. Among those most commonly used are of Barrass, Millward, Eryuzlu or ICORELS. This paper presents a comparison between the squat formulas to see the differences between them and which one provides the most satisfactory results. In this respect a cargo ship at different speeds was considered as a model for maximum squat calculations in canal navigation conditions.
Multi-Channel Maximum Likelihood Pitch Estimation
Christensen, Mads Græsbøll
2012-01-01
In this paper, a method for multi-channel pitch estimation is proposed. The method is a maximum likelihood estimator and is based on a parametric model where the signals in the various channels share the same fundamental frequency but can have different amplitudes, phases, and noise characteristics....... This essentially means that the model allows for different conditions in the various channels, like different signal-to-noise ratios, microphone characteristics and reverberation. Moreover, the method does not assume that a certain array structure is used but rather relies on a more general model and is hence...
Maximum entropy PDF projection: A review
Baggenstoss, Paul M.
2017-06-01
We review maximum entropy (MaxEnt) PDF projection, a method with wide potential applications in statistical inference. The method constructs a sampling distribution for a high-dimensional vector x based on knowing the sampling distribution p(z) of a lower-dimensional feature z = T (x). Under mild conditions, the distribution p(x) having highest possible entropy among all distributions consistent with p(z) may be readily found. Furthermore, the MaxEnt p(x) may be sampled, making the approach useful in Monte Carlo methods. We review the theorem and present a case study in model order selection and classification for handwritten character recognition.
CORA: Emission Line Fitting with Maximum Likelihood
Ness, Jan-Uwe; Wichmann, Rainer
2011-12-01
CORA analyzes emission line spectra with low count numbers and fits them to a line using the maximum likelihood technique. CORA uses a rigorous application of Poisson statistics. From the assumption of Poissonian noise, the software derives the probability for a model of the emission line spectrum to represent the measured spectrum. The likelihood function is used as a criterion for optimizing the parameters of the theoretical spectrum and a fixed point equation is derived allowing an efficient way to obtain line fluxes. CORA has been applied to an X-ray spectrum with the Low Energy Transmission Grating Spectrometer (LETGS) on board the Chandra observatory.
Dynamical maximum entropy approach to flocking
Cavagna, Andrea; Giardina, Irene; Ginelli, Francesco; Mora, Thierry; Piovani, Duccio; Tavarone, Raffaele; Walczak, Aleksandra M.
2014-04-01
We derive a new method to infer from data the out-of-equilibrium alignment dynamics of collectively moving animal groups, by considering the maximum entropy model distribution consistent with temporal and spatial correlations of flight direction. When bird neighborhoods evolve rapidly, this dynamical inference correctly learns the parameters of the model, while a static one relying only on the spatial correlations fails. When neighbors change slowly and the detailed balance is satisfied, we recover the static procedure. We demonstrate the validity of the method on simulated data. The approach is applicable to other systems of active matter.
Maximum Temperature Detection System for Integrated Circuits
Frankiewicz, Maciej; Kos, Andrzej
2015-03-01
The paper describes structure and measurement results of the system detecting present maximum temperature on the surface of an integrated circuit. The system consists of the set of proportional to absolute temperature sensors, temperature processing path and a digital part designed in VHDL. Analogue parts of the circuit where designed with full-custom technique. The system is a part of temperature-controlled oscillator circuit - a power management system based on dynamic frequency scaling method. The oscillator cooperates with microprocessor dedicated for thermal experiments. The whole system is implemented in UMC CMOS 0.18 μm (1.8 V) technology.
Zipf's law and maximum sustainable growth
Malevergne, Y; Sornette, D
2010-01-01
Zipf's law states that the number of firms with size greater than S is inversely proportional to S. Most explanations start with Gibrat's rule of proportional growth but require additional constraints. We show that Gibrat's rule, at all firm levels, yields Zipf's law under a balance condition between the effective growth rate of incumbent firms (which includes their possible demise) and the growth rate of investments in entrant firms. Remarkably, Zipf's law is the signature of the long-term optimal allocation of resources that ensures the maximum sustainable growth rate of an economy.
THE INFLUENCE OF WOMEN ON DISTANCE EDUCATION
2014-01-01
The impact of distance education on women has been significant. Distance education has been a viable means for helping women reach their educational ambitions. Over the last 40 years distance education has increased the ease of access and control over study time. With geographical and time barriers removed, women in particular were able to add the role of student to their list of responsibilities. Women have defeated educational barriers through educational opportunities presented by distance...
Distance-based classification of keystroke dynamics
Tran Nguyen, Ngoc
2016-07-01
This paper uses the keystroke dynamics in user authentication. The relationship between the distance metrics and the data template, for the first time, was analyzed and new distance based algorithm for keystroke dynamics classification was proposed. The results of the experiments on the CMU keystroke dynamics benchmark dataset1 were evaluated with an equal error rate of 0.0614. The classifiers using the proposed distance metric outperform existing top performing keystroke dynamics classifiers which use traditional distance metrics.
Array for measurement of the EAS pulse temporal structure at distances R>500 m
Fernandez, Arturo
Indications of the existence of temporal structure in the signals of Extensive Air Showers (EAS) of energies 10 greater than 17 eV at core distances of about 500 m (Atrashkevich et al ,1997, J.Phys.G, Nucl. Part. Phys., v.23,p. 237 and papers cited there) and the preliminary analysis of the Auger Water Cherenkov Detector (WCD) signal traces (Fernandez et al, this conference) stimulated us to intensify the temporal signal studies. For this aim we started to construct a hybrid array of one WCD plus an array of seven Air Cherenkov Detectors (ACD) one near the WCD and six in a regular hexagonal network centered on the WCD. Separation between ACDs is of about 750 m. The correlation in the temporal structure of the WCD signals and the position of the maximum obtained from the ACD array is studied. This hybrid array is located at the campus of the University of Puebla which is inside the city. Evidence that such an array can be successfully used to detect EASs with 10 primary energies above 16 eV in conditions of moderate to heavy light pollution environment such as the city of Puebla is presented.
Gender and distance influence performance predictors in young swimmers
Paulo Victor Mezzaroba
2013-12-01
Full Text Available Predictors of performance in adult swimmers are constantly changing during youth especially because the training routine begins even before puberty in the modality. Therefore this study aimed to determine the group of parameters that best predict short and middle swimming distance performances of young swimmers of both genders. Thirty-three 10-to 16-years-old male and female competitive swimmers participated in the study. Multiple linear regression (MLR was used considering mean speed of maximum 100, 200 and 400 m efforts as dependent variables, and five parameters groups as possible predictors (anthropometry, body composition, physiological and biomechanical parameters, chronological age/pubic hair. The main results revealed explanatory powers of almost 100% for both genders and all performances, but with different predictors entered in MLR models of each parameter group or all variables. Thus, there are considerable differences in short and middle swimming distance, and males and females predictors that should be considered in training programs.
Kupavskii, A. B.
2014-02-01
We study distance graphs with exponentially large chromatic numbers and without k-cliques, that is, complete subgraphs of size k. Explicit constructions of such graphs use vectors in the integer lattice. For a large class of graphs we find a sharp threshold for containing a k-clique. This enables us to improve the lower bounds for the maximum of the chromatic numbers of such graphs. We give a new probabilistic approach to the construction of distance graphs without k-cliques, and this yields better lower bounds for the maximum of the chromatic numbers for large k.
Normalized Compression Distance of Multiples
Cohen, Andrew R
2012-01-01
Normalized compression distance (NCD) is a parameter-free similarity measure based on compression. The NCD between pairs of objects is not sufficient for all applications. We propose an NCD of finite multisets (multiples) of objacts that is metric and is better for many applications. Previously, attempts to obtain such an NCD failed. We use the theoretical notion of Kolmogorov complexity that for practical purposes is approximated from above by the length of the compressed version of the file involved, using a real-world compression program. We applied the new NCD for multiples to retinal progenitor cell questions that were earlier treated with the pairwise NCD. Here we get significantly better results. We also applied the NCD for multiples to synthetic time sequence data. The preliminary results are as good as nearest neighbor Euclidean classifier.
Time delay and distance measurement
Abshire, James B. (Inventor); Sun, Xiaoli (Inventor)
2011-01-01
A method for measuring time delay and distance may include providing an electromagnetic radiation carrier frequency and modulating one or more of amplitude, phase, frequency, polarization, and pointing angle of the carrier frequency with a return to zero (RZ) pseudo random noise (PN) code. The RZ PN code may have a constant bit period and a pulse duration that is less than the bit period. A receiver may detect the electromagnetic radiation and calculate the scattering profile versus time (or range) by computing a cross correlation function between the recorded received signal and a three-state RZ PN code kernel in the receiver. The method also may be used for pulse delay time (i.e., PPM) communications.
Elasticity of Long Distance Travelling
Knudsen, Mette Aagaard
2011-01-01
With data from the Danish expenditure survey for 12 years 1996 through 2007, this study analyses household expenditures for long distance travelling. Household expenditures are examined at two levels of aggregation having the general expenditures on transportation and leisure relative to five other...... aggregated commodities at the highest level, and the specific expenditures on plane tickets and travel packages at the lowest level. The Almost Ideal Demand System is applied to determine the relationship between expenditures on transportation and leisure and all other purchased non-durables within...... packages has higher income elasticity of demand than plane tickets but also higher than transportation and leisure in general. The findings within price sensitiveness are not as sufficient estimated, but the model results indicate that travel packages is far more price elastic than plane tickets which...
Nobuyuki Kenmochi
1996-01-01
w is constrained to have double obstacles σ*≤w≤σ* (i.e., σ* and σ* are the threshold values of w. The objective of this paper is to discuss the semigroup {S(t} associated with the phase separation model, and construct its global attractor.
Phase separation micro molding
Vogelaar, Laura
2005-01-01
The research described in this thesis concerns the development of a new microfabrication method, Phase Separation Micro Molding (PSμM). While microfabrication is still best known from semiconductor industry, where it is used to integrate electrical components on a chip, the scope has immensely expan
Fathering After Marital Separation
Keshet, Harry Finkelstein; Rosenthal, Kristine M.
1978-01-01
Deals with experiences of a group of separated or divorced fathers who chose to remain fully involved in the upbringing of their children. As they underwent transition from married parenthood to single fatherhood, these men learned that meeting demands of child care contributed to personal stability and growth. (Author)
Fritz, P. [UFZ-Umweltforschungszentrum, Centre of Environmental Research Leipzig-Halle, Leipzig (Germany)
2000-07-01
Storm-runoff thus reflects the complex hydraulic behaviour of drainage basins and water-links of such systems. Water of different origin may participate in the events and in this lecture, the application of isotope techniques to separate storm hydrographs into different components will be presented.
Dabelsteen, Hans B.
This PhD thesis asks how we can conceptualize the current separation doctrine of religion and politics in a country like Denmark, where the structure of the established church and peoplehood overlap. In order to answer this question, Hans Bruun Dabelsteen maps the current discussion of secularism...