Maximum phytoplankton concentrations in the sea
Jackson, G.A.; Kiørboe, Thomas
2008-01-01
A simplification of plankton dynamics using coagulation theory provides predictions of the maximum algal concentration sustainable in aquatic systems. These predictions have previously been tested successfully against results from iron fertilization experiments. We extend the test to data collected...... in the North Atlantic as part of the Bermuda Atlantic Time Series program as well as data collected off Southern California as part of the Southern California Bight Study program. The observed maximum particulate organic carbon and volumetric particle concentrations are consistent with the predictions...
30 CFR 57.5039 - Maximum permissible concentration.
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum permissible concentration. 57.5039... Maximum permissible concentration. Except as provided by standard § 57.5005, persons shall not be exposed to air containing concentrations of radon daughters exceeding 1.0 WL in active workings. ...
Scientific substantination of maximum allowable concentration of fluopicolide in water
Pelo I.М.
2014-03-01
Full Text Available In order to substantiate fluopicolide maximum allowable concentration in the water of water reservoirs the research was carried out. Methods of study: laboratory hygienic experiment using organoleptic and sanitary-chemical, sanitary-toxicological, sanitary-microbiological and mathematical methods. The results of fluopicolide influence on organoleptic properties of water, sanitary regimen of reservoirs for household purposes were given and its subthreshold concentration in water by sanitary and toxicological hazard index was calculated. The threshold concentration of the substance by the main hazard criteria was established, the maximum allowable concentration in water was substantiated. The studies led to the following conclusions: fluopicolide threshold concentration in water by organoleptic hazard index (limiting criterion – the smell – 0.15 mg/dm3, general sanitary hazard index (limiting criteria – impact on the number of saprophytic microflora, biochemical oxygen demand and nitrification – 0.015 mg/dm3, the maximum noneffective concentration – 0.14 mg/dm3, the maximum allowable concentration - 0.015 mg/dm3.
Wezel AP van; Vlaardingen P van; CSR
2001-01-01
This report presents maximum permissible concentrations and negligible concentrations that have been derived for various antifouling substances used as substitutes for TBT. Included here are Irgarol 1051, dichlofluanide, ziram, chlorothalonil and TCMTB.
Sullivan, Terry [Brookhaven National Lab. (BNL), Upton, NY (United States)
2016-02-22
The objectives of this report are; To present a simplified conceptual model for release from the buildings with residual subsurface structures that can be used to provide an upper bound on contaminant concentrations in the fill material; Provide maximum water concentrations and the corresponding amount of mass sorbed to the solid fill material that could occur in each building for use in dose assessment calculations; Estimate the maximum concentration in a well located outside of the fill material; and Perform a sensitivity analysis of key parameters.
Maximum Permissible Concentrations and Negligible Concentrations for Rare Earth Elements (REEs)
Sneller FEC; Kalf DF; Weltje L; Wezel AP van; CSR
2000-01-01
In this report maximum permissible concentrations (MPCs) and negligible concentrations (NCs) are derived for Rare Earth Elements (REEs), which are also known as lanthanides. The REEs selected for derivation of environmental risk limits in this report are Yttrium (Y), Lanthanum (La), Cerium (Ce), Pra
Hutchinson, Thomas H. [Plymouth Marine Laboratory, Prospect Place, The Hoe, Plymouth PL1 3DH (United Kingdom)], E-mail: thom1@pml.ac.uk; Boegi, Christian [BASF SE, Product Safety, GUP/PA, Z470, 67056 Ludwigshafen (Germany); Winter, Matthew J. [AstraZeneca Safety, Health and Environment, Brixham Environmental Laboratory, Devon TQ5 8BA (United Kingdom); Owens, J. Willie [The Procter and Gamble Company, Central Product Safety, 11810 East Miami River Road, Cincinnati, OH 45252 (United States)
2009-02-19
organisms and the development of sound criteria for data interpretation when the exposure of organisms has exceeded the MTD. While the MTD approach is well established for oral, topical, inhalational or injection exposure routes in mammalian toxicology, we propose that for exposure of aquatic organisms via immersion, the term Maximum Tolerated Concentration (MTC) is more appropriate.
Stone, Wesley W.; Gilliom, Robert J.; Crawford, Charles G.
2008-01-01
Regression models were developed for predicting annual maximum and selected annual maximum moving-average concentrations of atrazine in streams using the Watershed Regressions for Pesticides (WARP) methodology developed by the National Water-Quality Assessment Program (NAWQA) of the U.S. Geological Survey (USGS). The current effort builds on the original WARP models, which were based on the annual mean and selected percentiles of the annual frequency distribution of atrazine concentrations. Estimates of annual maximum and annual maximum moving-average concentrations for selected durations are needed to characterize the levels of atrazine and other pesticides for comparison to specific water-quality benchmarks for evaluation of potential concerns regarding human health or aquatic life. Separate regression models were derived for the annual maximum and annual maximum 21-day, 60-day, and 90-day moving-average concentrations. Development of the regression models used the same explanatory variables, transformations, model development data, model validation data, and regression methods as those used in the original development of WARP. The models accounted for 72 to 75 percent of the variability in the concentration statistics among the 112 sampling sites used for model development. Predicted concentration statistics from the four models were within a factor of 10 of the observed concentration statistics for most of the model development and validation sites. Overall, performance of the models for the development and validation sites supports the application of the WARP models for predicting annual maximum and selected annual maximum moving-average atrazine concentration in streams and provides a framework to interpret the predictions in terms of uncertainty. For streams with inadequate direct measurements of atrazine concentrations, the WARP model predictions for the annual maximum and the annual maximum moving-average atrazine concentrations can be used to characterize
Sullivan, Terry [Brookhaven National Lab. (BNL), Upton, NY (United States). Biological, Environmental, and Climate Sciences Dept.
2014-12-02
ZionSolutions is in the process of decommissioning the Zion Nuclear Power Plant in order to establish a new water treatment plant. There is some residual radioactive particles from the plant which need to be brought down to levels so an individual who receives water from the new treatment plant does not receive a radioactive dose in excess of 25 mrem/y⁻¹. The objectives of this report are: (a) To present a simplified conceptual model for release from the buildings with residual subsurface structures that can be used to provide an upper bound on contaminant concentrations in the fill material; (b) Provide maximum water concentrations and the corresponding amount of mass sorbed to the solid fill material that could occur in each building for use in dose assessment calculations; (c) Estimate the maximum concentration in a well located outside of the fill material; and (d) Perform a sensitivity analysis of key parameters.
Dependence of maximum concentration from chemical accidents on release duration
Hanna, Steven; Chang, Joseph
2017-01-01
Chemical accidents often involve releases of a total mass, Q, of stored material in a tank over a time duration, td, of less than a few minutes. The value of td is usually uncertain because of lack of knowledge of key information, such as the size and location of the hole and the pressure and temperature of the chemical. In addition, it is rare that eyewitnesses or video cameras are present at the time of the accident. For inhalation hazards, serious health effects (such as damage to the respiratory system) are determined by short term averages (pressurized liquefied chlorine releases from tanks are given, focusing on scenarios from the Jack Rabbit I (JR I) field experiment. The analytical calculations and the predictions of the SLAB dense gas dispersion model agree that the ratio of maximum C for two different td's is greatest (as much as a factor of ten) near the source. At large distances (beyond a few km for the JR I scenarios), where tt exceeds both td's, the ratio of maximum C approaches unity.
40 CFR Table 1 to Subpart A of... - Maximum Concentration of Constituents for Groundwater Protection
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Maximum Concentration of Constituents for Groundwater Protection 1 Table 1 to Subpart A of Part 192 Protection of Environment ENVIRONMENTAL... Concentration of Constituents for Groundwater Protection Constituent concentration 1 Maximum Arsenic 0.05 Barium...
Coplen, T.B.; Hopple, J.A.; Böhlke, J.K.; Peiser, H.S.; Rieder, S.E.; Krouse, H.R.; Rosman, K.J.R.; Ding, T.; Vocke, R.D.; Revesz, K.M.; Lamberty, A.; Taylor, P.; De Bievre, P.
2002-01-01
laboratories comparable. The minimum and maximum concentrations of a selected isotope in naturally occurring terrestrial materials for selected chemical elements reviewed in this report are given below: Isotope Minimum mole fraction Maximum mole fraction -------------------------------------------------------------------------------- 2H 0 .000 0255 0 .000 1838 7Li 0 .9227 0 .9278 11B 0 .7961 0 .8107 13C 0 .009 629 0 .011 466 15N 0 .003 462 0 .004 210 18O 0 .001 875 0 .002 218 26Mg 0 .1099 0 .1103 30Si 0 .030 816 0 .031 023 34S 0 .0398 0 .0473 37Cl 0 .240 77 0 .243 56 44Ca 0 .020 82 0 .020 92 53Cr 0 .095 01 0 .095 53 56Fe 0 .917 42 0 .917 60 65Cu 0 .3066 0 .3102 205Tl 0 .704 72 0 .705 06 The numerical values above have uncertainties that depend upon the uncertainties of the determinations of the absolute isotope-abundance variations of reference materials of the elements. Because reference materials used for absolute isotope-abundance measurements have not been included in relative isotope abundance investigations of zinc, selenium, molybdenum, palladium, and tellurium, ranges in isotopic composition are not listed for these elements, although such ranges may be measurable with state-of-the-art mass spectrometry. This report is available at the url: http://pubs.water.usgs.gov/wri014222.
A comparison of muscle activity in concentric and counter movement maximum bench press.
van den Tillaar, Roland; Ettema, Gertjan
2013-01-01
The purpose of this study was to compare the kinematics and muscle activation patterns of regular free-weight bench press (counter movement) with pure concentric lifts in the ascending phase of a successful one repetition maximum (1-RM) attempt in the bench press. Our aim was to evaluate if diminishing potentiation could be the cause of the sticking region. Since diminishing potentiation cannot occur in pure concentric lifts, the occurrence of a sticking region in this type of muscle actions would support the hypothesis that the sticking region is due to a poor mechanical position. Eleven male participants (age 21.9 ± 1.7 yrs, body mass 80.7 ± 10.9 kg, body height 1.79 ± 0.07 m) conducted 1-RM lifts in counter movement and in pure concentric bench presses in which kinematics and EMG activity were measured. In both conditions, a sticking region occurred. However, the start of the sticking region was different between the two bench presses. In addition, in four of six muscles, the muscle activity was higher in the counter movement bench press compared to the concentric one. Considering the findings of the muscle activity of six muscles during the maximal lifts it was concluded that the diminishing effect of force potentiation, which occurs in the counter movement bench press, in combination with a delayed muscle activation unlikely explains the existence of the sticking region in a 1-RM bench press. Most likely, the sticking region is the result of a poor mechanical force position.
Volumetric Concentration Maximum of Cohesive Sediment in Waters: A Numerical Study
Jisun Byun
2014-12-01
Full Text Available Cohesive sediment has different characteristics compared to non-cohesive sediment. The density and size of a cohesive sediment aggregate (a so-called, floc continuously changes through the flocculation process. The variation of floc size and density can cause a change of volumetric concentration under the condition of constant mass concentration. This study investigates how the volumetric concentration is affected by different conditions such as flow velocity, water depth, and sediment suspension. A previously verified, one-dimensional vertical numerical model is utilized here. The flocculation process is also considered by floc in the growth type flocculation model. Idealized conditions are assumed in this study for the numerical experiments. The simulation results show that the volumetric concentration profile of cohesive sediment is different from the Rouse profile. The volumetric concentration decreases near the bed showing the elevated maximum in the cases of both current and oscillatory flow. The density and size of floc show the minimum and the maximum values near the elevation of volumetric concentration maximum, respectively. This study also shows that the flow velocity and the critical shear stress have significant effects on the elevated maximum of volumetric concentration. As mechanisms of the elevated maximum, the strong turbulence intensity and increased mass concentration are considered because they cause the enhanced flocculation process. This study uses numerical experiments. To the best of our knowledge, no laboratory or field experiments on the elevated maximum have been carried out until now. It is of great necessity to conduct well-controlled laboratory experiments in the near future.
van de Plassche EJ; Polder MD; Canton JH
1992-01-01
In this report Maximum Permissible Concentrations (MPC) are derived for 9 trace metals based on ecotoxicological data. The elements are: antimony, barium, beryllium, cobalt, molybdenum, selenium, thallium, tin, and vanadium The study was carried out in the framework of the project "Setting int
Nutrient maximums related to low oxygen concentrations in the southern Canada Basin
JIN Ming-ming; SHI Jiuxin; LU Yong; CHEN Jianfang; GAO Guoping; WU Jingfeng; ZHANG Haisheng
2005-01-01
The phenomenon of nutrient maximums at 70～200 m occurred only in the region of the Canada Basin among the world oceans. The prevailing hypothesis was that the direct injection of the low-temperature high-nutrient brines from the Chukchi Sea shelf (＜50 m) in winter provided the nutrient maximums. However, we found that there are five problems in the direct injection process. Formerly Jin et al. considered that the formation of nutrient maximums can be a process of locally long-term regeneration. Here we propose a regeneration-mixture process. Data of temperature, salinity, oxygen and nutrients were collected at three stations in the southern Canada Basin during the summer 1999 cruise. We identified the cores of the surface, near-surface, potential temperature maximum waters and Arctic Bottom Water by the diagrams and vertical profiles of salinity, potential temperature, oxygen and nutrients. The historical 129Ⅰ data indicated that the surface and near-surface waters were Pacific-origin, but the waters below the potential temperature maximum core depth was Atlantic-origin. Along with the correlation of nutrient maximums and very low oxygen contents in the near-surface water, we hypothesize that, the putative organic matter was decomposed to inorganic nutrients; and the Pacific water was mixed with the Atlantic water in the transition zone. The idea of the regeneration-mixture process agrees with the historical observations of no apparent seasonal changes, the smooth nutrient profiles, the lowest saturation of CaCO3 above 400 m, low rate of CFC-11 ventilation and 3H-3He ages of 8～18 a around the nutrient maximum depths.
Plassche EJ van de; Polder MD; Canton JH
1992-01-01
In this report Maximum Permissible Concentrations (MPC) are derived for 9 trace metals based on ecotoxicological data. The elements are: antimony, barium, beryllium, cobalt, molybdenum, selenium, thallium, tin, and vanadium The study was carried out in the framework of the project "Setting integrated environmental quality objectives". For the aquatic environment MPCs could be derived for all trace elements. These values were based on toxicity data for freshwater as well as saltwater...
Alfafara, C G; Miura, K; Shimizu, H; Shioya, S; Suga, K; Suzuki, K
1993-02-20
A fuzzy logic controller (FLC) for the control of ethanol concentration was developed and utilized to realize the maximum production of glutathione (GSH) in yeast fedbatch culture. A conventional fuzzy controller, which uses the control error and its rate of change in the premise part of the linguistic rules, worked well when the initial error of ethanol concentration was small. However, when the initial error was large, controller overreaction resulted in an overshoot.An improved fuzzy controller was obtained to avoid controller overreaction by diagnostic determination of "glucose emergency states" (i.e., glucose accumulation or deficiency), and then appropriate emergency control action was obtained by the use of weight coefficients and modification of linguistic rules to decrease the overreaction of the controller when the fermentation was in the emergency state. The improved fuzzy controller was able to control a constant ethanol concentration under conditions of large initial error.The improved fuzzy control system was used in the GSH production phase of the optimal operation to indirectly control the specific growth rate mu to its critical value micro(c). In the GSH production phase of the fed-batch culture, the optimal solution was to control micro to micro(c) in order to maintain a maximum specific GSH production rate. The value of micro(c) also coincided with the critical specific growth rate at which no ethanol formation occurs. Therefore, the control of micro to micro(c) could be done indirectly by maintaining a constant ethanol concentration, that is, zero net ethanol formation, through proper manipulation of the glucose feed rate. Maximum production of GSH was realized using the developed FLC; maximum production was a consequence of the substrate feeding strategy and cysteine addition, and the FLC was a simple way to realize the strategy.
Patterns of Co-occurring Gray Matter Concentration Loss Across the Huntington Disease Prodrome
Jennifer Ashley Ciarochi
2016-09-01
Full Text Available Huntington disease is caused by an abnormally expanded CAG trinucleotide repeat in the HTT gene. Age and CAG-expansion number are related to age at diagnosis, and can be used to index disease progression. However, observed onset-age variability suggests that other factors also modulate progression. Indexing prodromal (pre-diagnosis progression may highlight therapeutic targets by isolating the earliest-affected factors.We present the largest prodromal Huntington disease application of the univariate method Voxel-based Morphometry, and the first application of the multivariate method Source-based Morphometry, to respectively compare gray matter concentration and capture co-occurring gray matter concentration patterns in control and prodromal participants. Using structural MRI data from 1050 (831 prodromal, 219 control participants, we characterize control-prodromal, whole-brain gray matter concentration differences at various prodromal stages. Our results provide evidence for: (1 Regional co-occurrence and differential patterns of decline across the prodrome, with parietal and occipital differences commonly co-occurring, and frontal and temporal differences being relatively independent from one another, (2 Fronto-striatal circuits being among the earliest and most consistently affected in the prodrome (3 Delayed degradation in some movement-related regions, with increasing subcortical and occipital differences with later progression, (4 An overall superior-to-inferior gradient of gray matter concentration reduction in frontal, parietal, and temporal lobes, (5 The appropriateness of Source-based Morphometry for studying the prodromal Huntington disease population, and its enhanced sensitivity to early prodromal and regionally-concurrent differences.
Jennifer S. Pierce
2015-01-01
Full Text Available Diacetyl, a suspected cause of respiratory disorders in some food and flavorings manufacturing workers, is also a natural component of roasted coffee. We characterized diacetyl exposures that would plausibly occur in a small coffee shop during the preparation and consumption of unflavored coffee. Personal (long- and short-term and area (long-term samples were collected while a barista ground whole coffee beans, and brewed and poured coffee into cups. Simultaneously, long-term personal samples were collected as two participants, the customers, drank one cup of coffee each per h. Air sampling and analyses were conducted in accordance with OSHA Method 1012. Diacetyl was detected in all long-term samples. The long-term concentrations for the barista and area samples were similar, and ranged from 0.013–0.016 ppm; long-term concentrations for the customers were slightly lower and ranged from 0.010–0.014 ppm. Short-term concentrations ranged from below the limit of detection (<0.0047 ppm–0.016 ppm. Mean estimated 8 h time-weighted average (8 h TWA exposures for the barista ranged from 0.007–0.013 ppm; these values exceed recommended 8 h TWA occupational exposure limits (OELs for diacetyl and are comparable to long-term personal measurements collected in various food and beverage production facilities. The concentrations measured based on area sampling were comparable to those measured in the breathing zone of the barista, thus exceedances of the recommended OELs may also occur for coffee shop workers who do not personally prepare coffee (e.g., cashier, sanitation/maintenance. These findings suggest that the practicality and scientific basis of the recommended OELs for diacetyl merit further consideration.
Sullivan, Terry [Brookhaven National Lab. (BNL), Upton, NY (United States). Biological, Environmental and Climate Sciences Dept.
2014-12-10
ZionSolutions is in the process of decommissioning the Zion Nuclear Power Plant in order to establish a new water treatment plant. There is some residual radioactive particles from the plant which need to be brought down to levels so an individual who receives water from the new treatment plant does not receive a radioactive dose in excess of 25 mrem/y⁻¹ as specified in 10 CFR 20 Subpart E. The objectives of this report are: (a) To present a simplified conceptual model for release from the buildings with residual subsurface structures that can be used to provide an upper bound on radionuclide concentrations in the fill material and the water in the interstitial spaces of the fill. (b) Provide maximum water concentrations and the corresponding amount of mass sorbed to the solid fill material that could occur in each building for use by ZSRP in selecting ROCs for detailed dose assessment calculations.
Dang, Viet D.; Walters, David; Lee, Cindy M.
2016-01-01
Conifers are often used as an “air passive sampler”, but few studies have focused on the implication of broadleaf evergreens to monitor atmospheric semivolatile organic compounds such as polychlorinated biphenyls (PCBs). In this study, we used Rhododendron maximum (rhododendron) growing next to a contaminated stream to assess atmospheric PCB concentrations. The study area was located in a rural setting and approximately 2 km downstream of a former Sangamo-Weston (S-W) plant. Leaves from the same mature shrubs were collected in late fall 2010, and winter and spring 2011. PCBs were detected in the collected leaves suggesting that rhododendron can be used as air passive samplers in rural areas where active sampling is impractical. Estimated ΣPCB (47 congeners) concentrations in the atmosphere decreased from fall 2010 to spring 2011 with concentration means at 3990, 2850, and 931 pg m-3 in fall 2010, winter 2011, and spring 2011, respectively. These results indicate that the atmospheric concentrations at this location continue to be high despite termination of active discharge from the former S-W plant. Leaves had a consistent pattern of high concentrations of tetra- and penta-CBs similar to the congener distribution in polyethylene (PE) passive samplers deployed in the water column suggesting that volatilized PCBs from the stream were the primary source of contaminants in rhododendron leaves.
Yii, M.W. [Malaysian Nuclear Agency (Nuclear Malaysia), Bangi, 43000 Kajang (Malaysia)], E-mail: yii@nuclearmalaysia.gov.my; Zaharudin, A.; Abdul-Kadir, I. [Malaysian Nuclear Agency (Nuclear Malaysia), Bangi, 43000 Kajang (Malaysia)
2009-04-15
Studies of naturally occurring radioactive materials (NORM) distribution of {sup 226}Ra, {sup 228}Ra and {sup 40}K in East Malaysia were carried out as part of a marine coastal environment project. The results of measurements will serve as baseline data and background reference level for Malaysia coastlines. Sediments from 21 coastal locations and 10 near shore locations were collected for analyses. The samples were dried, finely ground, sealed in a container and stored for a minimum of 30 days to establish secular equilibrium between {sup 226}Ra and {sup 228}Ra and their respective radioactive progenies. They were counted using a high-purity germanium (HPGe) spectrometer covering the respective progeny energy peak. For {sup 40}K, the presence of this was measured directly via its 1460 keV energy peak. The concentration of {sup 226}Ra, {sup 228}Ra and {sup 40}K in samples obtained from coastal Sarawak ranged between 23 and 41 (mean 30{+-}2) Bq/kg, 27 and 45 (mean 39{+-}4) Bq/kg and 142 and 680 (mean 462{+-}59) Bq/kg, respectively. Meanwhile, the concentration of {sup 226}Ra, {sup 228}Ra and {sup 40}K for samples obtained from coastal Sabah ranged between 16 and 30 (mean 23{+-}2) Bq/kg, 23 and 45 (mean 35{+-}4) Bq/kg and 402 and 842 (mean 577{+-}75) Bq/kg, respectively. For the Sarawak near shore stations, the concentration of {sup 226}Ra, {sup 228}Ra and {sup 40}K ranged between 11 and 36 (mean 22{+-}2) Bq/kg, 21 and 65 (mean 39{+-}5) Bq/kg and 149 and 517 (mean 309{+-}41) Bq/kg, respectively. Meanwhile, the concentration of {sup 226}Ra, {sup 228}Ra and {sup 40}K for samples obtained from Sabah ranged between 9 and 31 (mean 14{+-}2) Bq/kg, 10 and 48 (mean 21{+-}3) Bq/kg and 140 and 580 (mean 269{+-}36) Bq/kg, respectively. The calculated external hazard values of between 0.17 and 0.33 (less than unity) showed that there is little risk of external hazard to the workers handling the sediments.
Patterns of Co-Occurring Gray Matter Concentration Loss across the Huntington Disease Prodrome
Ciarochi, Jennifer Ashley; Calhoun, Vince D.; Lourens, Spencer; Long, Jeffrey D.; Johnson, Hans J.; Bockholt, H. Jeremy; Liu, Jingyu; Plis, Sergey M.; Paulsen, Jane S.; Turner, Jessica A.
2016-01-01
Huntington disease (HD) is caused by an abnormally expanded cytosine–adenine–guanine (CAG) trinucleotide repeat in the HTT gene. Age and CAG-expansion number are related to age at diagnosis and can be used to index disease progression. However, observed onset-age variability suggests that other factors also modulate progression. Indexing prodromal (pre-diagnosis) progression may highlight therapeutic targets by isolating the earliest-affected factors. We present the largest prodromal HD application of the univariate method voxel-based morphometry (VBM) and the first application of the multivariate method source-based morphometry (SBM) to, respectively, compare gray matter concentration (GMC) and capture co-occurring GMC patterns in control and prodromal participants. Using structural MRI data from 1050 (831 prodromal, 219 control) participants, we characterize control-prodromal, whole-brain GMC differences at various prodromal stages. Our results provide evidence for (1) regional co-occurrence and differential patterns of decline across the prodrome, with parietal and occipital differences commonly co-occurring, and frontal and temporal differences being relatively independent from one another, (2) fronto-striatal circuits being among the earliest and most consistently affected in the prodrome, (3) delayed degradation in some movement-related regions, with increasing subcortical and occipital differences with later progression, (4) an overall superior-to-inferior gradient of GMC reduction in frontal, parietal, and temporal lobes, and (5) the appropriateness of SBM for studying the prodromal HD population and its enhanced sensitivity to early prodromal and regionally concurrent differences. PMID:27708610
Vacca, G. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires
1967-07-01
The Task group of Committee II of the International Commission on Radiological Protection (I.C.R.P.) presided by P.E. Morrow published in 1966 the results of its work on aerosol dynamics in the respiratory tract. In that report a model was proposed for the deposition of dust in the lung and lymphatic nodes and for its clearance in the blood and/or in the gastrointestinal tract. The present report gathers the maximum permissible concentration values resulting from the application of such model. (author) [French] Le groupe de travail du Comite II de la Commission Internationale de Protection contre les Rayonnements (C.I.P.R.), preside par P.E. MORROW, a publie en 1966 les resultats de ses etudes concernant la dynamique des aerosols dans l'appareil respiratoire. Dans cette publication, un schema est propose pour le depot des poussieres dans les poumons et les ganglions lymphatiques et pour leur elimination dans le sang et/ou l'appareil digestif. La presente note rassemble les valeurs des concentrations maximales admissibles resultant de l'application d'un tel schema. (auteur)
Rubanov, G.P.; Grebtsov, E.M.; Kurnosov, V.K.; Tolstoi, G.I.
1988-06-01
Recommendations of 'Instructions on determining pneumoconiosis danger of mine work in coal mines' for choice of a basic point for measuring maximum single concentration of dust along scraper longwalls do not make it possible to objectively evaluate dust load at working places. In the Instructions, a point at 10 to 15 m from exit of longwall on the ventilation drift with an emergent stream of air is proposed for the dust probe. This designated point does not take into account the influence of the scheme of ventilation of the walls on formation of dust currents. Investigations of probes taken at different places along the longwall (at the beginning, 15 m from the begining, 15 m from the end, at the niche and transfer point of the longwal) using direct and reverse flow schemes of ventilation showed that the best point for determining maximum single concentratin of dust is a point in the middle of the longwall where dust currents are the same for both systems of ventilation, and use of a new method of calculating the dust load by testing at many different positions along the scraper longall makes it possible to determine the category of pneumonoconiosis danger for workers at scraper longwalls.
Orr, John L.
1997-01-01
In many ways, the typical approach to the handling of bibliographic material for generating review articles and similar manuscripts has changed little since the use of xerographic reproduction has become widespread. The basic approach is to collect reprints of the relevant material and place it in folders or stacks based on its dominant content. As the amount of information available increases with the passage of time, the viability of this mechanical approach to bibliographic management decreases. The personal computer revolution has changed the way we deal with many familiar tasks. For example, word processing on personal computers has supplanted the typewriter for many applications. Similarly, spreadsheets have not only replaced many routine uses of calculators but have also made possible new applications because the cost of calculation is extremely low. Objective The objective of this research was to use personal computer bibliographic software technology to support the determination of spacecraft maximum acceptable concentration (SMAC) values. Specific Aims The specific aims were to produce draft SMAC documents for hydrogen sulfide and tetrachloroethylene taking maximum advantage of the bibliographic software.
Mente, Scot; Doran, Angela; Wager, Travis T
2012-06-14
The objective of this work was to establish that unbound maximum concentrations may be reasonably predicted from a combination of computed molecular properties assuming subcutaneous (SQ) dosing. Additionally, we show that the maximum unbound plasma and brain concentrations may be projected from a mixture of in vitro absorption, distribution, metabolism, excretion experimental parameters in combination with computed properties (volume of distribution, fraction unbound in microsomes). Finally, we demonstrate the utility of the underlying equations by showing that the maximum total plasma concentrations can be projected from the experimental parameters for a set of compounds with data collected from clinical research.
Fišer-Šobot Sandra S.
2016-01-01
Full Text Available Relevant Serbian and EU competition legislation does not define what is considered a concentration, but regulates which business transactions lead to concentrations of undertakings. Concentrations can be differentiated according to whether the concentration affects legal position of the merging undertakings. A concentration shall be deemed to arise where a change of control on a lasting basis results from the merger of two or more previously independent undertakings or parts of undertakings. Second type of concentrations occurs in the case of an acquisition of control. Finally, the concentration shall be deemed to arise in the case of creation of a joint venture performing on a lasting basis all the functions of an autonomous economic entity. This paper analyses mergers and concentrations occurring on the basis of acquiring of control in Serbian and EU competition law.
Metaproteome of the viral concentrates from the deep chlorophyll maximum of the South China Sea
Xie, Zhang-Xian; Chen, Feng; Zhang, Shu-Feng; Wang, Ming-Hua; Zhang, Hao; Kong, Ling-Fen; Dai, Min-Han; Hong, Hua-Sheng; Lin, Lin; Wang, Da-Zhi
2016-04-01
Viral concentrates (VCs) have been commonly used for studying viral diversity, viral metagenomics and virus-host interactions in the natural ecosystem. However, the protein characteristics of VCs have not been explored. Here, we applied shotgun proteomics to characterize the proteins of VCs collected from the oligotrophic deep chlorophyll maximum of the South China Sea. We found that 34% of the identified proteins were assigned to the viruses, mainly being those of SAR11 related bacteria, cyanobacteria and picophytoeukaryotes. The remaining 66% were non-viral proteins mostly originating from diverse bacteria, such as SAR324, SAR11 and the Alteromonadales, and were functionally dominated by transport, translation, sulfur metabolism and one-carbon metabolism. Among the non-viral proteins, 28% were extracellular proteins and 10% were identified exclusively in the VCs, suggesting that non-viral entities might exist in the VCs. This study demonstrated that metaproteomics provides a valuable avenue to explore not only the diversity and structure of a viral community but also the novel ecological functions affiliated with microbes in the natural environment.
Liza S. Köster
2015-03-01
Full Text Available Babesia rossi is the cause of a highly virulent multisystemic disease with a variable outcome, which is a reliable model of systemic inflammatory response syndrome (SIRS. The objective of this study was to determine the concentration of canine pancreatic-specific lipase (cPL in a population of dogs with naturally acquired B. rossi infection. In addition, the associations between serum cPL and death and SIRS status were examined. An observational study recruited 87 dogs diagnosed with B. rossi infection and serum cPL concentrations were measured daily until discharge or death. The median concentration of serum cPL was 124.0 µg/L (interquartile range: 51.0 µg/L – 475.5 µg/L on admission (n = 87 and 145.5 µg/L (62.3 µg/L – 434.0 µg/L on day two of hospitalisation (n = 40. Twenty-four dogs (28% had a serum cPL concentration within the diagnostic range for pancreatitis (> 400 µg/L at admission with 13 dogs (32.5% presenting as such on the second day of hospitalisation. The median concentration of serum cPL in dogs with SIRS was 158 µg/L (interquartile range: 52.5 µg/L – 571.5 µg/L; n = 53, which was significantly higher than in those without SIRS (75 µg/L; 50.3 µg/L – 131.8 µg/L; n = 32 (P = 0.018. This study demonstrated that an unexpectedly high number of dogs diagnosed with naturally acquired canine babesiosis had a serum cPL concentration within the diagnostic range for acute pancreatitis and a significantly higher serum cPL concentration was found in dogs that were classified as having SIRS.
Concentrations of the naturally occurring radionucleides Pb-210, Po-210, and Ra-226 in aquatic fauna
Holtzman, R. B.
1969-01-01
Study reveals naturally occurring radionuclides are ubiquitous and contribute a substantial fraction of the natural radiation dose to humans and various biota. Measurements may be useful in ecological and other biological problems such as tracing food chains of animals and study of the metabolism of these elements.
Mariño, Rodrigo
2013-09-01
Fluorosis and dental caries in Mexican schoolchildren residing in areas with different water fluoride concentrations and receiving fluoridated salt. Garcia-Perez A, Irigoyen-Carnacho ME, Borges-Yanez A. Caries Res 2013;47(4):299-308. Rodrigo Mariño Is there an association between the presence of dental fluorosis and fluoride concentration in drinking water? and Is there an association between the severity of fluorosis and dental caries experience in schoolchildren residing in two rural towns in Mexico (with water fluoride concentrations of 0.70 and 1.50 ppm) that also receive fluoridated salt? Government: National Council of Science and Technology (Consejo Nacional de Ciencia y Tecnologia, CONACYT) Other: Autonomous University, Xochimilco (Universidad Autonoma Metropolitana, UAM-X) TYPE OF STUDY/DESIGN: Cross-sectional Level 3: Other evidence Not applicable. Copyright © 2013 Elsevier Inc. All rights reserved.
Pedersen, Henrik Duelund; Falk, Bo Torkel; Häggström, Jens;
2005-01-01
Insulin-like growth factor-1 (IGF-1), which mediates most effects of growth hormone, has effects on cardiac mass and function, and plays an important role in the regulation of vascular tone. In humans, an inverse relationship between degree of heart failure (HF) and circulating IGF-1 concentrations...
Christine Delpérée; Stanley Lutts
2008-01-01
In order to analyze the adaptation potential of tomato shoots to a sudden increase in Cd concentration, tomato plants (Solanum lycopersicum L. var. Ailsa Craig) were exposed under controlled environmental conditions to a high dose of this heavy metal (250 μM CdCl2>) in nutrient solution for 7 and 14 d. Both root and shoot growth was completely inhibited but all plants remained alive until the end of the treatment. Cell viability remained unaffected but the activity of the mitochondrial alternative pathway was stimulated by Cd stress at the expense of the cytochrome pathway. Cadmium concentration was higher in roots than in shoots and a decrease In the rate of net Cd translocation was noticed during the second week of stress. Cadmium decreased both leaf conductance (g1>) and chlorophyll concentration. However, the effect on net CO2 assimilation remained limited and soluble sugars accumulated in leaves. Photochemical efficiency of PSll (FvlFm) was not affected despite a decrease in the number of reaction centers and an inhibition of electron transfer to acceptors of PSII. It is concluded that tomato shoot may sustain short term exposure to high doses of cadmium despite growth inhibition. This property implies several physiological strategies linked to both avoidance and tolerance mechanisms.
Smit CE; Wezel AP van; Jager T; Traas TP; CSR
2000-01-01
The impact of secondary poisoning on the Maximum Permissible Concentrations (MPCs) and Negligible Concentrations (NCs) of cadmium, copper and mercury in water, sediment and soil have been evaluated. Field data on accumulation of these elements by fish, mussels and earthworms were used to derive MPC
Smit CE; Wezel AP van; Jager T; Traas TP; CSR
2000-01-01
The impact of secondary poisoning on the Maximum Permissible Concentrations (MPCs) and Negligible Concentrations (NCs) of cadmium, copper and mercury in water, sediment and soil have been evaluated. Field data on accumulation of these elements by fish, mussels and earthworms were used to derive
Rossi, G; Kuleš, J; Rafaj, R Barić; Mrljak, V; Lauzi, S; Giordano, A; Paltrinieri, S
2014-10-01
Paraoxonase 1 (PON1) is a negative acute phase protein bound to high density lipoproteins (HDL) and during the acute phase response (APR) protects HDL from peroxidation. The aim of this study was to assess the relationship between PON1 and HDL in canine babesiosis, a disease characterized by oxidative damages and by an APR. PON1, HDL and C-reactive protein (CRP), were measured in blood collected from 15 controls and 29 dogs with babesiosis sampled at admission, and on days 1 and 7 after treatment. At admission, PON1 and HDL were significantly lower in affected dogs. HDL concentration increased at day 1 while PON1 increased and CRP decreased at day 7. This suggests that the decrease of PON1 at admission is in part due to an increased consumption, the decreased HDL may depend on lipid peroxidation and its rapid increase after treatment may depend on the antioxidant activity of PON1. Copyright © 2014 Elsevier Ltd. All rights reserved.
Ortiz-García, E. G.; Salcedo-Sanz, S.; Pérez-Bellido, A. M.; Gascón-Moreno, J.; Portilla-Figueras, A.
In this paper we present the application of a support vector regression algorithm to a real problem of maximum daily tropospheric ozone forecast. The support vector regression approach proposed is hybridized with an heuristic for optimal selection of hyper-parameters. The prediction of maximum daily ozone is carried out in all the station of the air quality monitoring network of Madrid. In the paper we analyze how the ozone prediction depends on meteorological variables such as solar radiation and temperature, and also we perform a comparison against the results obtained using a multi-layer perceptron neural network in the same prediction problem.
Okkonen, Jarkko; Neupauer, Roseanna M.
2016-05-01
Capture zones of water supply wells are most often delineated based on travel times of water or solute to the well, with the assumption that if the travel time is sufficiently large, the concentration of chemical at the well will not exceed the drinking water standards. In many situations, the likely source concentrations or release masses of contamination from the potential sources are unknown; therefore, the exact concentration at the well cannot be determined. In situations in which the source mass can be estimated with some accuracy, the delineation of the capture zone should be based on the maximum chemical concentration that can be expected at the well, rather than on an arbitrary travel time. We present a new capture zone delineation methodology that is based on this maximum chemical concentration. The method delineates capture zones by solving the adjoint of the advection-dispersion-reaction equation and relating the adjoint state and the known release mass to the expected chemical concentration at the well. We demonstrate the use of this method through a case study in which soil heat exchange systems are potential sources of contamination. The heat exchange fluid mixtures contain known fluid volumes and chemical concentrations; thus, in the event of a release, the release mass of the chemical is known. We also demonstrate the use of a concentration basis in quantifying other measures of well vulnerability including exposure time and time to exceed a predefined threshold concentration at the well.
Tran Duy, A.; Schrama, J.W.; Dam, van A.A.; Verreth, J.A.J.
2008-01-01
Feed intake and satiation in fish are regulated by a number of factors, of which dissolved oxygen concentration (DO) is important. Since fish take up oxygen through the limited gill surface area, all processes that need energy, including food processing, depend on their maximum oxygen uptake capacit
Segal, A.; Epstein, M.
2009-08-01
A central solar plant, based on beam-down optics, is composed of a field of heliostats, a tower reflector and a ground receiver. The tower reflector is an optical system comprises of a quadric surface mirror (hyperboloid), where its upper focal point coincides with the aim point of a heliostat field and its lower focal point is located at a specified height, coinciding with the entrance plane of the ground receiver. The optics of a tower reflector requires the use of ground secondary concentrator, composed of a cluster of CPCs, because the quadric surface mirror always magnifies the sun image. There is an intrinsic correlation between the tower reflector position and its size on one hand, and the geometry, dimensions and reflective area of the secondary concentrator on the other hand; both are related to the heliostat field reflective area. Obviously, when one wishes to have a smaller tower reflector by placing it closer to the upper focal point, the image created at the lower focus will be larger, resulting in a larger secondary ground concentrator. The present work analyses the ways for a substantial decrease of the size of the ground concentrator cluster (and, implicit, the concentrators area) via truncation, without significant sacrifice of the performance, although some increase of the optical losses is inevitable. This offers a method for cost effective design of future central solar plants utilizing the beam down optics.
2010-07-01
... Measurements Required, and Maximum Discrepancy Specification C Table C-1 to Subpart C of Part 53 Protection of... Reference Methods Pt. 53, Subpt. C, Table C-1 Table C-1 to Subpart C of Part 53—Test Concentration Ranges... 0.25 to 0.35 2 2 .03 Total 7 8 Effective Date Note: At 75 FR 35601, June 22, 2010, table C-1 to...
Ahmadian, Radin
2010-09-01
This study investigated the relationship of anthocyanin concentration from different organic fruit species and output voltage and current in a TiO2 dye-sensitized solar cell (DSSC) and hypothesized that fruits with greater anthocyanin concentration produce higher maximum power point (MPP) which would lead to higher current and voltage. Anthocyanin dye solution was made with crushing of a group of fresh fruits with different anthocyanin content in 2 mL of de-ionized water and filtration. Using these test fruit dyes, multiple DSSCs were assembled such that light enters through the TiO2 side of the cell. The full current-voltage (I-V) co-variations were measured using a 500 Ω potentiometer as a variable load. Point-by point current and voltage data pairs were measured at various incremental resistance values. The maximum power point (MPP) generated by the solar cell was defined as a dependent variable and the anthocyanin concentration in the fruit used in the DSSC as the independent variable. A regression model was used to investigate the linear relationship between study variables. Regression analysis showed a significant linear relationship between MPP and anthocyanin concentration with a p-value of 0.007. Fruits like blueberry and black raspberry with the highest anthocyanin content generated higher MPP. In a DSSC, a linear model may predict MPP based on the anthocyanin concentration. This model is the first step to find organic anthocyanin sources in the nature with the highest dye concentration to generate energy.
Gabarro, Carolina; Turiel, Antonio; Elosegui, Pedro; Pla-Resina, Joaquim A.; Portabella, Marcos
2017-08-01
Monitoring sea ice concentration is required for operational and climate studies in the Arctic Sea. Technologies used so far for estimating sea ice concentration have some limitations, for instance the impact of the atmosphere, the physical temperature of ice, and the presence of snow and melting. In the last years, L-band radiometry has been successfully used to study some properties of sea ice, remarkably sea ice thickness. However, the potential of satellite L-band observations for obtaining sea ice concentration had not yet been explored. In this paper, we present preliminary evidence showing that data from the Soil Moisture Ocean Salinity (SMOS) mission can be used to estimate sea ice concentration. Our method, based on a maximum-likelihood estimator (MLE), exploits the marked difference in the radiative properties of sea ice and seawater. In addition, the brightness temperatures of 100 % sea ice and 100 % seawater, as well as their combined values (polarization and angular difference), have been shown to be very stable during winter and spring, so they are robust to variations in physical temperature and other geophysical parameters. Therefore, we can use just two sets of tie points, one for summer and another for winter, for calculating sea ice concentration, leading to a more robust estimate. After analysing the full year 2014 in the entire Arctic, we have found that the sea ice concentration obtained with our method is well determined as compared to the Ocean and Sea Ice Satellite Application Facility (OSI SAF) dataset. However, when thin sea ice is present (ice thickness ≲ 0.6 m), the method underestimates the actual sea ice concentration. Our results open the way for a systematic exploitation of SMOS data for monitoring sea ice concentration, at least for specific seasons. Additionally, SMOS data can be synergistically combined with data from other sensors to monitor pan-Arctic sea ice conditions.
Arriagada, Manuel; Cipagauta, Carolina; Foppiano, Alberto
2013-05-01
A simple semi-empirical model to determine the maximum electron concentration in the ionosphere (NmF2) for South American locations is used to calculate NmF2 for a northern hemisphere station in the same longitude sector. NmF2 is determined as the sum of two terms, one related to photochemical and diffusive processes and the other one to transport mechanisms. The model gives diurnal variations of NmF2 representative for winter, summer and equinox conditions, during intervals of high and low solar activity. Model NmF2 results are compared with ionosonde observations made at Toluca-México (19.3°N; 260°E). Differences between model results and observations are similar to those corresponding to comparisons with South American observations. It seems that further improvement of the model could be made by refining the latitude dependencies of coefficients used for the transport term.
Ma, Bing-Liang; Yin, Chun; Zhang, Bo-Kai; Dai, Yan; Jia, Yi-Qun; Yang, Yan; Li, Qiao; Shi, Rong; Wang, Tian-Ming; Wu, Jia-Sheng; Li, Yuan-Yuan; Lin, Ge; Ma, Yue-Ming
2016-01-29
Pharmacological activities of some natural products diminish and even disappear after purification. In this study, we explored the mechanisms underlying the decrease of acute oral toxicity of Coptidis Rhizoma extract after purification. The water solubility, in vitro absorption, and plasma exposure of berberine (the major active compound) in the Coptidis Rhizoma extract were much better than those of pure berberine. Scanning electron microscopy, laser scanning confocal microscopy (LSCM), and dynamic light scattering experiments confirmed that nanoparticles attached to very fine precipitates existed in the aqueous extract solution. The LSCM experiment showed that the precipitates were absorbed with the particles by the mouse intestine. High-speed centrifugation of the extract could not remove the nanoparticles and did not influence plasma exposure or acute oral toxicity. However, after extract dilution, the attached precipitates vanished, although the nanoparticles were preserved, and there were no differences in the acute oral toxicity and plasma exposure between the extract and pure berberine. The nanoparticles were then purified and identified as proteinaceous. Furthermore, they could absorb co-dissolved berberine. Our results indicate that naturally occurring proteinaceous nanoparticles in Coptidis Rhizoma extract act as concentration-dependent carriers that facilitate berberine absorption. These findings should inspire related studies in other natural products.
S. Gannouni
2016-01-01
Full Text Available In a tunnel fire, the production of smoke and toxic gases remains the principal prejudicial factors to users. The heat is not considered as a major direct danger to users since temperatures up to man level do not reach tenable situations that after a relatively long time except near the fire source. However, the temperatures under ceiling can exceed the thresholds conditions and can thus cause structural collapse of infrastructure. This paper presents a numerical analysis of smoke hazard in tunnel fires with different aspect ratio by large eddy simulation. Results show that the CO concentration increases as the aspect ratio decreases and decreases with the longitudinal ventilation velocity. CFD predicted maximum smoke temperatures are compared to the calculated values using the model of Li et al. and then compared with those given by the empirical equation proposed by kurioka et al. A reasonable good agreement has been obtained. The backlayering length decreases as the ventilation velocity increases and this decrease fell into good exponential decay. The dimensionless interface height and the region of bad visibility increases with the aspect ratio of the tunnel cross-sectional geometry.
Gang Li
2012-01-01
Full Text Available Vertical patterns of early summer chlorophyll a (Chl a concentration from the Indian Ocean are presented, as well as the variations of depth and size-fractioned Chl a in the deep chlorophyll maximum (DCM. A total of 38 stations were investigated from 12 April to 5 May 2011, with 8 discrete-depth samples (7 fixed and 1 variable at real DCM measured at each station. Depth-integrated Chl a concentration (∑Chl a varied from 11.5 to 26.8 mg m−2, whereas Chl a content at DCM ranged from 0.17 to 0.57 μg L−1 with picophytoplankton (<3 μm accounting for 82% to 93%. The DCM depth varied from 55.6 to 91 m and shoaled latitudinally to northward. Moreover, our results indicated that the ∑Chl a could be underestimated by up to 9.3% with a routine sampling protocol of collecting samples only at 7 fixed depths as the real DCM was missed. The underestimation was negatively correlated to the DCM depth when it varied from 55.6 to 71.3 m (r=−0.63, P<0.05 but positively correlated when it ranged from 75.8 to 91 m (r=0.68, P<0.01. This indicates that in the Indian Ocean the greater the departure of the DCM from 75 m depth, the greater the underestimation of integrated Chl a concentration that could occur if the real DCM is missed.
Lee, Kab-Jae; Kim, Sol; Lee, Ju; Oh, Jae-Eung
2003-05-01
A brushless dc (BLDC) motor, which has a permanent magnet (PM) component, is a potential candidate for hybrid or electric vehicle applications. Minimizing the BLDC motor size is an important requirement for application. This requirement is usually satisfied by adopting a high performance permanent magnet or improved winding methods. The PM configuration is also a critical point in design. This article presents the effect of the PM configuration on motor performance, especially the maximum torque. Four representative BLDC motor types are analytically investigated under the condition that the volume of the PM and magnetic material is constant. An embedded interior permanent magnet motor has the best torque performance the maximum torque of which is more than 1.5 times larger than that of the surface mounted permanent magnet motor. The performance of back electromotive force, instantaneous torques is also investigated.
Oudyn, Frederik W; Lyons, David J; Pringle, M J
2012-01-01
Many scientific laboratories follow, as standard practice, a relatively short maximum holding time (within 7 days) for the analysis of total suspended solids (TSS) in environmental water samples. In this study we have subsampled from bulk water samples stored at ∼4 °C in the dark, then analysed for TSS at time intervals up to 105 days after collection. The nonsignificant differences in TSS results observed over time demonstrates that storage at ∼4 °C in the dark is an effective method of preserving samples for TSS analysis, far past the 7-day standard practice. Extending the maximum holding time will ease the pressure on sample collectors and laboratory staff who until now have had to determine TSS within an impractically short period.
Regina A. A.
2010-12-01
Full Text Available The study is to model emission from a stack to estimate ground level concentration from a palm oil mill. The case study is a mill located in Kuala Langat, Selangor. Emission source is from boilers stacks. The exercise determines the estimate the ground level concentrations for dust to the surrounding areas through the utilization of modelling software. The surround area is relatively flat, an industrial area surrounded by factories and with palm oil plantations in the outskirts. The model utilized in the study was to gauge the worst-case scenario. Ambient air concentrations were garnered calculate the increase to localized conditions. Keywords: emission, modelling, palm oil mill, particulate, POME
Regina A. A.; I. Mohammad Halim Shah
2010-01-01
The study is to model emission from a stack to estimate ground level concentration from a palm oil mill. The case study is a mill located in Kuala Langat, Selangor. Emission source is from boilers stacks. The exercise determines the estimate the ground level concentrations for dust to the surrounding areas through the utilization of modelling software. The surround area is relatively flat, an industrial area surrounded by factories and with palm oil plantations in the outskirts. The model uti...
Wezel AP van; Posthumus R; Vlaardingen P van; Crommentuijn T; Plassche EJ van de; CSR
1999-01-01
This report presents maximal permissible concentrations (MPCs) and negligible concentrations (NCs) are derived for di-n-butylphthalate (DBP) and di(2-ethylhexyl)phthalate (DEHP). Phthalates are often mentioned as suspected endocrine disrupters. Data with endpoints related to the endocrine or reprodu
Shannon H. Gaffney
2015-01-01
Full Text Available Over the last decade, concerns have been raised about potential respiratory health effects associated with occupational exposure to the flavoring additives diacetyl and 2,3-pentanedione. Both of these diketones are also natural components of many foods and beverages, including roasted coffee. To date, there are no published studies characterizing workplace exposures to these diketones during commercial roasting and grinding of unflavored coffee beans. In this study, we measured naturally occurring diacetyl, 2,3-pentanedione, and respirable dust at a facility that roasts and grinds coffee beans with no added flavoring agents. Sampling was conducted over the course of three roasting batches and three grinding batches at varying distances from a commercial roaster and grinder. The three batches consisted of lightly roasted soft beans, lightly roasted hard beans, and dark roasted hard beans. Roasting occurred for 37 to 41 min, and the grinding process took between 8 and 11 min. Diacetyl, 2,3-pentanedione, and respirable dust concentrations measured during roasting ranged from less than the limit of detection (
Lee, Tali D; Reich, Peter B; Tjoelker, Mark G
2003-09-01
Legumes, with the ability to fix atmospheric nitrogen (N), may help alleviate the N limitations thought to constrain plant community response to elevated concentrations of atmospheric carbon dioxide (CO(2)). To address this issue we assessed: (1) the effects of the presence of the perennial grassland N(2 )fixer, Lupinus perennis, on biomass accumulation and plant N concentrations of nine-species plots of differing plant composition; (2) leaf-level physiology of co-occurring non-fixing species (Achillea millefolium, Agropyron repens, Koeleria cristata) in these assemblages with and without Lupinus; (3) the effects of elevated CO(2) on Lupinus growth and symbiotic N(2) fixation in both monoculture and the nine-species assemblages; and (4) whether assemblages containing Lupinus exhibit larger physiological and growth responses to elevated CO(2 )than those without. This study was part of a long-term grassland field experiment (BioCON) that controls atmospheric CO(2) at current ambient and elevated (560 micromol mol(-1)) concentrations using free-air CO(2) enrichment. Nine-species plots with Lupinus had 32% higher whole plot plant N concentrations and 26% higher total plant N pools than those without Lupinus, based on both above and below ground measurements. Co-occurring non-fixer leaf N concentrations increased 22% and mass-based net photosynthetic rates increased 41% in plots containing Lupinus compared to those without. With CO(2) enrichment, Lupinus monocultures accumulated 32% more biomass and increased the proportion of N derived from fixation from 44% to 57%. In nine-species assemblages, Lupinus N derived from fixation increased similarly from 43% to 54%. Although Lupinus presence enhanced photosynthetic rates and leaf N concentrations of co-occurring non-fixers, and increased overall plant N pools, Lupinus presence did not facilitate stronger photosynthetic responses of non-fixing species or larger growth responses of overall plant communities to elevated CO(2
Hermes, Anna L.; Sikes, Elisabeth L.
2016-10-01
The pathway and fate of land-derived suspended particulate organic matter (POM) as it passes through estuaries remains a poorly constrained component of coastal carbon dynamics. The δ13C of bulk POC (particulate organic carbon; δ13C-POC) and n-alkane biomarkers were used to assess the proportion of algal- and land- (vascular plant) derived POM through the Delaware Estuary, on five cruises in 2010-2011. We found that POC was highly correlated with suspended sediment concentrations (SSC). Higher SSC was present in bottom waters, causing bottom waters to have consistently higher concentrations of POC than surface waters, with the bottom waters of the estuarine turbidity maximum (ETM) exhibiting maximum POC concentrations for all seasons and flow regimes. Algal-derived POM seasonally affected the δ13C-POC and n-alkane geochemical signatures of surface waters, whereas bottom waters were dominated by vascular plant-derived POM. δ13C-POC results suggested a gradual loss in vascular plant-derived POM between the riverine and marine endmember stations. In contrast, n-alkane concentrations peaked in bottom waters of the ETM at 2-5 times surface water concentrations. Indices of the relative proportions of n-alkanes and n-alkanes as a proportion of total POC had their levels decrease considerably downstream of the ETM. These biomarker analyses suggest enhanced loss of land-derived material across the ETM and that the ETM acts as a geochemical filter for vascular plant-derived POM in a classic well mixed estuary.
Ma, Kaifeng; Song, Yuepeng; Huang, Zhen; Lin, Liyuan; Zhang, Zhiyi; Zhang, Deqiang
2013-03-01
KEY MESSAGE : We report that low fertility during intraspecific hybridization in Chinese white poplar was caused by prefertilization barriers, reduced ovules, and embryonic abortion. Hormone concentrations and gene expression patterns were also evaluated during the fertilization process. Hybrid vigor holds tremendous potential for yield increases and trait improvement; however, some hybridization combinations within Populus show very low fertility. To explore the causes of this low fertility in intraspecific hybridization of Chinese white poplar, we examined anatomical structure, hormone levels and expression of key genes in two unique crossing combinations of Populus × tomentosa "Pt02" × P. × tomentosa "LM50", and (P. × tomentosa × P. alba cv. bolleana "Ptb") × P. × tomentosa "LM50". The seed set potential in the intraspecific hybridization P. × tomentosa "Pt02" × P. × tomentosa "LM50" was quite low, which was likely caused by prefertilization barriers, reduced ovule numbers, and embryonic abortion in ovaries. During intraspecific hybridization, we found reduced indoleacetic acid (IAA) in pistils, which may cause pollen tube deformations and increased IAA in heart-stage embryos, which may affect embryo development. Gibberellin A3 (GA3) decreased from the zygote dormancy stage to globular-stage embryos, which may be caused by failure of fertilization in specific embryos. The maximum zeatin (Z) concentration was found in heart-stage embryos, but Z concentrations quickly decreased, which may affect endosperm development. Increasing concentrations of abscisic acid (ABA) during zygote dormancy and eight-cell proembryo stages likely induced abscission of the infructescence. High ABA concentrations also regulated embryo maturity. Measurement of genes expression showed that high expression of SRK and/or SLG may result in rejection of pollen by stigmatic papillae through a mechanism, reminiscent of self-incompatibility. Also, low expression of
Schiefelbein, Sarah; Fröhlich, Alexander; John, Gernot T; Beutler, Falco; Wittmann, Christoph; Becker, Judith
2013-08-01
Dissolved oxygen plays an essential role in aerobic cultivation especially due to its low solubility. Under unfavorable conditions of mixing and vessel geometry it can become limiting. This, however, is difficult to predict and thus the right choice for an optimal experimental set-up is challenging. To overcome this, we developed a method which allows a robust prediction of the dissolved oxygen concentration during aerobic growth. This integrates newly established mathematical correlations for the determination of the volumetric gas-liquid mass transfer coefficient (kLa) in disposable shake-flasks from the filling volume, the vessel size and the agitation speed. Tested for the industrial production organism Corynebacterium glutamicum, this enabled a reliable design of culture conditions and allowed to predict the maximum possible cell concentration without oxygen limitation.
Kerbaul, F; Giorgi, R; Oddoze, C; Collart, F; Guidon, C; Lejeune, P J; Villacorta, J; Gouin, F
2004-11-01
Procalcitonin (PCT) blood concentrations are known to be an appropriate marker of severe systemic inflammatory response syndrome (SIRS) induced by coronary artery surgery with and without cardiopulmonary bypass. Pro-brain natriuretic peptide (N-BNP) is a newly described cardiac hormone considered to be an effective marker of severity and prognosis of acute coronary syndromes and congestive heart failure. We evaluated the perioperative time courses of PCT and N-BNP and investigated their role as early markers of severe SIRS (SIRS with cardiovascular dysfunction) induced by off-pump coronary artery bypass (OPCAB). Sixty-three patients were prospectively included. The American College of Chest Physicians Classification was used to diagnose SIRS and organ system failure to define severe SIRS. Serum concentrations of PCT and N-BNP were determined before, during and after surgery. Receiver operating characteristic curves and cut-off values were used to assess the ability of these markers to predict postoperative severe SIRS. SIRS occurred in 25 (39%) patients. Nine of them (14%) showed severe SIRS. Significantly higher serum concentrations of N-BNP and PCT were found in patients with severe SIRS with peak concentrations respectively at 8887 pg ml(-1) (range 2940-29372 pg ml(-1)) for N-BNP and 9.50 ng ml(-1) (range 1-65 ng ml(-1)) for PCT. The area under the curve using N-BNP to detect postoperative severe SIRS was 0.799 before surgery (0.408 for PCT; Psurgery (0.762 for PCT; PSIRS after OPCAB.
Naseeruddin, Shaik; Desai, Suseelendra; Venkateswar Rao, L
2016-02-01
Two grams of delignified substrate at 10% (w/v) level was subjected to biphasic dilute acid hydrolysis using phosphoric acid, hydrochloric acid and sulfuric acid separately at 110 °C for 10 min in phase-I and 121 °C for 15 min in phase-II. Combinations of acid concentrations in two phases were varied for maximum holocellulose hydrolysis with release of fewer inhibitors, to select the suitable acid and its concentration. Among three acids, sulfuric acid in combination of 1 & 2% (v/v) hydrolyzed maximum holocellulose of 25.44±0.44% releasing 0.51±0.02 g/L of phenolics and 0.12±0.002 g/L of furans, respectively. Further, hydrolysis of delignified substrate using selected acid by varying reaction time and temperature hydrolyzed 55.58±1.78% of holocellulose releasing 2.11±0.07 g/L and 1.37±0.03 g/L of phenolics and furans, respectively at conditions of 110 °C for 45 min in phase-I & 121 °C for 60 min in phase-II.
Hu, Kaifeng; Ellinger, James J; Chylla, Roger A; Markley, John L
2011-12-15
Time-zero 2D (13)C HSQC (HSQC(0)) spectroscopy offers advantages over traditional 2D NMR for quantitative analysis of solutions containing a mixture of compounds because the signal intensities are directly proportional to the concentrations of the constituents. The HSQC(0) spectrum is derived from a series of spectra collected with increasing repetition times within the basic HSQC block by extrapolating the repetition time to zero. Here we present an alternative approach to data collection, gradient-selective time-zero (1)H-(13)C HSQC(0) in combination with fast maximum likelihood reconstruction (FMLR) data analysis and the use of two concentration references for absolute concentration determination. Gradient-selective data acquisition results in cleaner spectra, and NMR data can be acquired in both constant-time and non-constant-time mode. Semiautomatic data analysis is supported by the FMLR approach, which is used to deconvolute the spectra and extract peak volumes. The peak volumes obtained from this analysis are converted to absolute concentrations by reference to the peak volumes of two internal reference compounds of known concentration: DSS (4,4-dimethyl-4-silapentane-1-sulfonic acid) at the low concentration limit (which also serves as chemical shift reference) and MES (2-(N-morpholino)ethanesulfonic acid) at the high concentration limit. The linear relationship between peak volumes and concentration is better defined with two references than with one, and the measured absolute concentrations of individual compounds in the mixture are more accurate. We compare results from semiautomated gsHSQC(0) with those obtained by the original manual phase-cycled HSQC(0) approach. The new approach is suitable for automatic metabolite profiling by simultaneous quantification of multiple metabolites in a complex mixture.
Svensson, Jan, E-mail: jan.svensson@ki.se [Department of Molecular Medicine and Surgery, Karolinska Institutet, Karolinska University Hospital (Solna), SE-171 76 Stockholm (Sweden); Karolinska Institutet, Department of Clinical Sciences, Danderyd Hospital, SE-182 88 Stockholm (Sweden); Bergman, Ann-Charlotte [Department of Molecular Medicine and Surgery, Karolinska Institutet, Karolinska University Hospital (Solna), SE-171 76 Stockholm (Sweden); Adamson, Ulf [Karolinska Institutet, Department of Clinical Sciences, Danderyd Hospital, SE-182 88 Stockholm (Sweden); Blombaeck, Margareta [Department of Molecular Medicine and Surgery, Karolinska Institutet, Karolinska University Hospital (Solna), SE-171 76 Stockholm (Sweden); Wallen, Hakan; Joerneskog, Gun [Karolinska Institutet, Department of Clinical Sciences, Danderyd Hospital, SE-182 88 Stockholm (Sweden)
2012-05-04
Highlights: Black-Right-Pointing-Pointer Fibrinogen was incubated in vitro with glucose or aspirin. Black-Right-Pointing-Pointer Acetylations and glycations were found at twelve lysine sites by mass spectrometry. Black-Right-Pointing-Pointer The labeling by aspirin and glucose occurred dose-dependently. Black-Right-Pointing-Pointer No competition between glucose and aspirin for binding to fibrinogen was found. -- Abstract: Aspirin may exert part of its antithrombotic effects through platelet-independent mechanisms. Diabetes is a condition in which the beneficial effects of aspirin are less prominent or absent - a phenomenon called 'aspirin resistance'. We investigated whether acetylation and glycation occur at specific sites in fibrinogen and if competition between glucose and aspirin in binding to fibrinogen occurs. Our hypothesis was that such competition might be one explanation to 'aspirin resistance' in diabetes. After incubation of fibrinogen in vitro with aspirin (0.8 mM, 24 h) or glucose (100 mM, 5-10 days), we found 12 modified sites with mass spectrometric techniques. Acetylations in the {alpha}-chain: {alpha}K191, {alpha}K208, {alpha}K224, {alpha}K429, {alpha}K457, {alpha}K539, {alpha}K562, in the {beta}-chain: {beta}K233, and in the {gamma}-chain: {gamma}K170 and {gamma}K273. Glycations were found at {beta}K133 and {gamma}K75, alternatively {gamma}K85. Notably, the lysine 539 is a site involved in FXIII-mediated cross-linking of fibrin. With isotope labeling in vitro, using [{sup 14}C-acetyl]salicylic acid and [{sup 14}C]glucose, a labeling of 0.013-0.084 and 0.12-0.5 mol of acetylated and glycated adduct/mol fibrinogen, respectively, was found for clinically (12.9-100 {mu}M aspirin) and physiologically (2-8 mM glucose) relevant plasma concentrations. No competition between acetylation and glycation could be demonstrated. Thus, fibrinogen is acetylated at several lysine residues, some of which are involved in the cross-linking of
Ovalle, E. M.; Bravo, M. A.; Villalobos, C. U.; Foppiano, A. J.
2013-10-01
Ionospheric variability observed prior to mayor earthquakes has been studied for decades. In particular, in many such studies the identification of ionospheric precursors of large earthquakes has been regarded as a specific goal. This paper analyses the observations of the maximum electron concentration (NmF2) over Concepción (36.8°S; 73.0°W) and of the total electron content (TEC) for an area covering the rupture zone corresponding to the very large Chile earthquake of 27 February 2010. The analyses used here are similar to those published before for many earthquakes in Taiwan, Japan and Russia. Possible NmF2 and TEC precursors are compared with other precursors proposed for the same earthquake using different TEC determinations and satellite observations of electron/ion concentration, energetic particle bursts and electromagnetic emissions. Some possible precursors derived from the various observations are consistent with each other. However, none can be unambiguously associated to the Chilean earthquake.
Karlsson, I; Wernersson, S; Ambrosen, A; Kindahl, H; Södersten, F; Wang, L; Hagman, R
2013-11-15
Sepsis is difficult to diagnose and remains a common mortality cause worldwide in both humans and animals. The uterine infection pyometra causes sepsis in more than half of affected dogs and therefore allows the natural physiological development of sepsis to be studied. To find a sepsis-specific biochemical marker that could be combined with conventional clinical criteria for a more robust and quick diagnosis of sepsis, we measured systemic concentrations of high-mobility group box 1 (HMGB1) in 23 healthy control dogs and in 27 dogs with pyometra, 74% of which had sepsis. We also measured concentrations of the major acute phase protein C-reactive protein (CRP) and an indicator for endotoxaemia, prostaglandin F2α metabolite (PGM) to assess the relative contribution of HMGB1 to the detection of systemic inflammation and endotoxaemia. We found that HMGB1 concentrations, in line with concentrations of CRP and PGM, were significantly increased in dogs with pyometra, and that concentrations of CRP, but not HMGB1, were significantly higher in dogs with sepsis compared to dogs without sepsis. Although serum HMGB1 did not differ between dogs with or without sepsis and was not correlated with either CRP or PGM concentrations, HMGB1 was correlated with the total white blood cell counts, suggesting an independent regulation and involvement in inflammation. Copyright © 2013 Elsevier B.V. All rights reserved.
Kinkhabwala, Ali
2013-01-01
The most fundamental problem in statistics is the inference of an unknown probability distribution from a finite number of samples. For a specific observed data set, answers to the following questions would be desirable: (1) Estimation: Which candidate distribution provides the best fit to the observed data?, (2) Goodness-of-fit: How concordant is this distribution with the observed data?, and (3) Uncertainty: How concordant are other candidate distributions with the observed data? A simple unified approach for univariate data that addresses these traditionally distinct statistical notions is presented called "maximum fidelity". Maximum fidelity is a strict frequentist approach that is fundamentally based on model concordance with the observed data. The fidelity statistic is a general information measure based on the coordinate-independent cumulative distribution and critical yet previously neglected symmetry considerations. An approximation for the null distribution of the fidelity allows its direct conversi...
Rodrigues, Elsa Teresa; Pardal, Miguel Ângelo; Gante, Cristiano; Loureiro, João; Lopes, Isabel
2017-02-01
The main goal of the present study was to determine and validate an aquatic Maximum Acceptable Concentration-Environmental Quality Standard (MAC-EQS) value for the agricultural fungicide azoxystrobin (AZX). Assessment factors were applied to short-term toxicity data using the lowest EC50 and after the Species Sensitivity Distribution (SSD) method. Both ways of EQS generation were applied to a freshwater toxicity dataset for AZX based on available data, and to marine toxicity datasets for AZX and Ortiva(®) (a commercial formulation of AZX) obtained by the present study. A high interspecific variability in AZX sensitivity was observed in all datasets, being the copepoda Eudiaptomus graciloides (LC50,48h = 38 μg L(-1)) and the gastropod Gibbula umbilicalis (LC50,96h = 13 μg L(-1)) the most sensitive freshwater and marine species, respectively. MAC-EQS values derived using the lowest EC50 (≤0.38 μg L(-1)) were more protective than those derived using the SSD method (≤3.2 μg L(-1)). After comparing the MAC-EQS values estimated in the present study to the smallest AA-EQS available, which protect against the occurrence of prolonged exposure of AZX, the MAC-EQS values derived using the lowest EC50 were considered overprotective and a MAC-EQS of 1.8 μg L(-1) was validated and recommended for AZX for the water column. This value was derived from marine toxicity data, which highlights the importance of testing marine organisms. Moreover, Ortiva affects the most sensitive marine species to a greater extent than AZX, and marine species are more sensitive than freshwater species to AZX. A risk characterization ratio higher than one allowed to conclude that AZX might pose a high risk to the aquatic environment. Also, in a wider conclusion, before new pesticides are approved, we suggest to improve the Tier 1 prospective Ecological Risk Assessment by increasing the number of short-term data, and apply the SSD approach, in order to ensure the safety of
Silvia Vilasi
Full Text Available It has been established that Hsp60 can accumulate in the cytosol in various pathological conditions, including cancer and chronic inflammatory diseases. Part or all of the cytosolic Hsp60 could be naïve, namely, bear the mitochondrial import signal (MIS, but neither the structure nor the in solution oligomeric organization of this cytosolic molecule has still been elucidated. Here we present a detailed study of the structure and self-organization of naïve cytosolic Hsp60 in solution. Results were obtained by different biophysical methods (light and X ray scattering, single molecule spectroscopy and hydrodynamics that all together allowed us to assay a wide range of concentrations of Hsp60. We found that Naïve Hsp60 in aqueous solution is assembled in very stable heptamers and tetradecamers at all concentrations assayed, without any trace of monomer presence.
Vilasi, Silvia; Carrotta, Rita; Mangione, Maria Rosalia; Campanella, Claudia; Librizzi, Fabio; Randazzo, Loredana; Martorana, Vincenzo; Marino Gammazza, Antonella; Ortore, Maria Grazia; Vilasi, Annalisa; Pocsfalvi, Gabriella; Burgio, Giosalba; Corona, Davide; Palumbo Piccionello, Antonio; Zummo, Giovanni; Bulone, Donatella; Conway de Macario, Everly; Macario, Alberto J L; San Biagio, Pier Luigi; Cappello, Francesco
2014-01-01
It has been established that Hsp60 can accumulate in the cytosol in various pathological conditions, including cancer and chronic inflammatory diseases. Part or all of the cytosolic Hsp60 could be naïve, namely, bear the mitochondrial import signal (MIS), but neither the structure nor the in solution oligomeric organization of this cytosolic molecule has still been elucidated. Here we present a detailed study of the structure and self-organization of naïve cytosolic Hsp60 in solution. Results were obtained by different biophysical methods (light and X ray scattering, single molecule spectroscopy and hydrodynamics) that all together allowed us to assay a wide range of concentrations of Hsp60. We found that Naïve Hsp60 in aqueous solution is assembled in very stable heptamers and tetradecamers at all concentrations assayed, without any trace of monomer presence.
Abuyaman, Omar; Andreasen, Birgitte H; Kronborg, Camilla
2013-01-01
BACKGROUND: Cellular uptake of vitamin B12 (B12) demands binding of the vitamin to transcobalamin (TC) and recognition of TC-B12 (holoTC) by the receptor CD320, a receptor expressed in high quantities on human placenta. We have identified a soluble form of CD320 (sCD320) in serum and here we...... present data on the occurrence of this soluble receptor in both serum and urine during pregnancy. METHODS: We examined serum from twenty-seven pregnant women (cohort 1) at gestational weeks 13, 24 and 36 and serum and urine samples from forty pregnant women (cohort 2) tested up to 8 times during...... for the first time that sCD320 is present in urine and in a higher concentration than in serum and that serum and urine sCD320 increase during pregnancy. The high urinary concentration and the strong correlation between urinary and serum sCD320 suggests that sCD320 is filtered in the kidney....
NONE
2015-11-01
The book on the MAK (maximum permissible concentrations at the place of work) and BAT (biological tolerance values for working materials) value list 2015 includes the following chapters: (a) Maximum permissible concentrations at the place of work: definition, application and determination of MAT values, list of materials; carcinogenic working materials, sensibilizing working materials, aerosols, limiting the exposition peaks, skin resorption, MAK values during pregnancy, germ cell mutagens, specific working materials; (b) Biological tolerance values for working materials: definition and application of BAT values, list of materials, carcinogenic working materials, biological guide values, biological working material reference values.
NONE
2013-08-01
The book on the MAK (maximum permissible concentrations at the place of work) and BAT (biological tolerance values for working materials) value list 2013 includes the following chapters: (a) Maximum permissible concentrations at the place of work: definition, application and determination of MAT values, list of materials; carcinogenic working materials, sensibilizing working materials, aerosols, limiting the exposition peaks, skin resorption, MAK values during pregnancy, germ cell mutagens, specific working materials; (b) Biological tolerance values for working materials: definition and application of BAT values, list of materials, carcinogenic working materials, biological guide values, biological working material reference values.
NONE
2014-11-01
The book on the MAK (maximum permissible concentrations at the place of work) and BAT (biological tolerance values for working materials) value list 2014 includes the following chapters: (a) Maximum permissible concentrations at the place of work: definition, application and determination of MAT values, list of materials; carcinogenic working materials, sensibilizing working materials, aerosols, limiting the exposition peaks, skin resorption, MAK values during pregnancy, germ cell mutagens, specific working materials; (b) Biological tolerance values for working materials: definition and application of BAT values, list of materials, carcinogenic working materials, biological guide values, biological working material reference values.
NONE
2017-08-01
The MAK and BAT values list 2017 includes the maximum permissible concentrations at the place of work and biological tolerance values for working materials. The following working materials are covered: carcinogenic working materials, sensitizing materials and aerosols. The report discusses the restriction of exposure peaks, skin resorption, MAK (maximum working place concentration) values during pregnancy, germ cell mutagens and specific working materials. Importance and application of BAT (biological working material tolerance) values, list of materials, carcinogens, biological guide values and reference values are also included.
Omar Abuyaman
Full Text Available BACKGROUND: Cellular uptake of vitamin B12 (B12 demands binding of the vitamin to transcobalamin (TC and recognition of TC-B12 (holoTC by the receptor CD320, a receptor expressed in high quantities on human placenta. We have identified a soluble form of CD320 (sCD320 in serum and here we present data on the occurrence of this soluble receptor in both serum and urine during pregnancy. METHODS: We examined serum from twenty-seven pregnant women (cohort 1 at gestational weeks 13, 24 and 36 and serum and urine samples from forty pregnant women (cohort 2 tested up to 8 times during gestational weeks 17-41. sCD320, holoTC, total TC and complex formation between holoTC and sCD320 were measured by in-house ELISA methods, while creatinine was measured on the automatic platform Cobas 6000. Size exclusion chromatography was performed on a Superdex 200 column. RESULTS: Median (range of serum sCD320 increased from 125 (87-839 pmol/L (week 15 to reach a peak value of 199 (72-672 pmol/L (week 35 then dropped back to its baseline level just before birth (week 40. Around one third of sCD320 was precipitated with holoTC at all-time points studied. The urinary concentration of sCD320 was around two fold higher than in serum. Urinary sCD320/creatinine ratio correlated with serum sCD320 and reached a peak median level of 53 (30-101 pmol/mmol creatinine (week 35. sCD320 present in serum and urine showed the same elution pattern upon size exclusion chromatography. CONCLUSION: We report for the first time that sCD320 is present in urine and in a higher concentration than in serum and that serum and urine sCD320 increase during pregnancy. The high urinary concentration and the strong correlation between urinary and serum sCD320 suggests that sCD320 is filtered in the kidney.
Maximum permissible concentrations of uranium in air
Adams, N
1973-01-01
The retention of uranium by bone and kidney has been re-evaluated taking account of recently published data for a man who had been occupationally exposed to natural uranium aerosols and for adults who had ingested uranium at the normal dietary levels. For life-time occupational exposure to uranium aerosols the new retention functions yield a greater retention in bone and a smaller retention in kidney than the earlier ones, which were based on acute intakes of uranium by terminal patients. Hence bone replaces kidney as the critical organ. The (MPC) sub a for uranium 238 on radiological considerations using the current (1959) ICRP lung model for the new retention functions is slightly smaller than for earlier functions but the (MPC) sub a determined by chemical toxicity remains the most restrictive.
Maximum Autocorrelation Factorial Kriging
Nielsen, Allan Aasbjerg; Conradsen, Knut; Pedersen, John L.
2000-01-01
This paper describes maximum autocorrelation factor (MAF) analysis, maximum autocorrelation factorial kriging, and its application to irregularly sampled stream sediment geochemical data from South Greenland. Kriged MAF images are compared with kriged images of varimax rotated factors from...
赵明; 谢松梅; 杨劲; 魏敏吉
2014-01-01
During the assessment of bioequivalence in our country ,the in-terval limits for maximum concentration ( Cmax ) is in an alternating phase.The aim of this paper is to introduce some principles and thoughts of bioequivalence for area under the curve (AUC) and Cmax.Examples of two drugs evaluation were presented here , which might be helpful for the development and review of generics.%在国内的生物等效性评价中，峰浓度（Cmax ）的等效界值尚处在新老标准交替阶段。当 Cmax处在新老标准之间，如何进行审评决策，是一个需要认真考虑的问题。本文通过2个药物审评实例，介绍关于该类问题的思考原则和思路，以期为仿制药的研究开发和审评提供参考。
Kethireddy, V; Oey, I; Jowett, Tim; Bremer, P
2016-09-16
Sub-lethal injury within a microbial population, due to processing treatments or environmental stress, is often assessed as the difference in the number of cells recovered on non-selective media compared to numbers recovered on a "selective media" containing a predetermined maximum non-inhibitory concentration (MNIC) of a selective agent. However, as knowledge of cell metabolic response to injury, population diversity and dynamics increased, the rationale behind the conventional approach of quantifying sub-lethal injury must be scrutinized further. This study reassessed the methodology used to quantify sub-lethal injury for Saccharomyces cerevisiae cells (≈ 4.75 Log CFU/mL) exposed to either a mild thermal (45°C for 0, 10 and 20min) or a mild pulsed electric field treatment (field strengths of 8.0-9.0kV/cm and energy levels of 8, 14 and 21kJ/kg). Treated cells were plated onto either Yeast Malt agar (YM) or YM containing NaCl, as a selective agent at 5-15% in 1% increments. The impact of sub-lethal stress due to initial processing, the stress due to selective agents in the plating media, and the subsequent variation of inhibition following the treatments was assessed based on the CFU count (cell numbers). ANOVA and a generalised least squares model indicated significant effects of media, treatments, and their interaction effects (P<0.05) on cell numbers. It was shown that the concentration of the selective agent used dictated the extent of sub-lethal injury recorded owing to the interaction effects of the selective component (NaCl) in the recovery media. Our findings highlight a potential common misunderstanding on how culture conditions impact on sub-lethal injury. Interestingly for S. cerevisiae cells the number of cells recovered at different NaCl concentrations in the media appears to provide valuable information about the mode of injury, the comparative efficacy of different processing regimes and the inherent degree of resistance within a population. This
Maximum Autocorrelation Factorial Kriging
Nielsen, Allan Aasbjerg; Conradsen, Knut; Pedersen, John L.; Steenfelt, Agnete
2000-01-01
This paper describes maximum autocorrelation factor (MAF) analysis, maximum autocorrelation factorial kriging, and its application to irregularly sampled stream sediment geochemical data from South Greenland. Kriged MAF images are compared with kriged images of varimax rotated factors from an ordinary non-spatial factor analysis, and they are interpreted in a geological context. It is demonstrated that MAF analysis contrary to ordinary non-spatial factor analysis gives an objective discrimina...
Naturally Occurring Radioactive Materials (NORM)
Gray, P. [ed.
1997-02-01
This paper discusses the broad problems presented by Naturally Occuring Radioactive Materials (NORM). Technologically Enhanced naturally occuring radioactive material includes any radionuclides whose physical, chemical, radiological properties or radionuclide concentration have been altered from their natural state. With regard to NORM in particular, radioactive contamination is radioactive material in an undesired location. This is a concern in a range of industries: petroleum; uranium mining; phosphorus and phosphates; fertilizers; fossil fuels; forestry products; water treatment; metal mining and processing; geothermal energy. The author discusses in more detail the problem in the petroleum industry, including the isotopes of concern, the hazards they present, the contamination which they cause, ways to dispose of contaminated materials, and regulatory issues. He points out there are three key programs to reduce legal exposure and problems due to these contaminants: waste minimization; NORM assesment (surveys); NORM compliance (training).
Maximum likely scale estimation
Loog, Marco; Pedersen, Kim Steenstrup; Markussen, Bo
2005-01-01
A maximum likelihood local scale estimation principle is presented. An actual implementation of the estimation principle uses second order moments of multiple measurements at a fixed location in the image. These measurements consist of Gaussian derivatives possibly taken at several scales and/or ...
Maximum information photoelectron metrology
Hockett, P; Wollenhaupt, M; Baumert, T
2015-01-01
Photoelectron interferograms, manifested in photoelectron angular distributions (PADs), are a high-information, coherent observable. In order to obtain the maximum information from angle-resolved photoionization experiments it is desirable to record the full, 3D, photoelectron momentum distribution. Here we apply tomographic reconstruction techniques to obtain such 3D distributions from multiphoton ionization of potassium atoms, and fully analyse the energy and angular content of the 3D data. The PADs obtained as a function of energy indicate good agreement with previous 2D data and detailed analysis [Hockett et. al., Phys. Rev. Lett. 112, 223001 (2014)] over the main spectral features, but also indicate unexpected symmetry-breaking in certain regions of momentum space, thus revealing additional continuum interferences which cannot otherwise be observed. These observations reflect the presence of additional ionization pathways and, most generally, illustrate the power of maximum information measurements of th...
Generalized Entropy Concentration for Counts
Oikonomou, Kostas N
2016-01-01
We consider the phenomenon of entropy concentration under linear constraints in a discrete setting, using the "balls and bins" paradigm, but without the assumption that the number of balls allocated to the bins is known. Therefore instead of \\ frequency vectors and ordinary entropy, we have count vectors with unknown sum, and a certain generalized entropy. We show that if the constraints bound the allowable sums, this suffices for concentration to occur even in this setting. The concentration can be either in terms of deviation from the maximum generalized entropy value, or in terms of the norm of the difference from the maximum generalized entropy vector. Without any asymptotic considerations, we quantify the concentration in terms of various parameters, notably a tolerance on the constraints which ensures that they are always satisfied by an integral vector. Generalized entropy maximization is not only compatible with ordinary MaxEnt, but can also be considered an extension of it, as it allows us to address...
Maximum Likelihood Associative Memories
Gripon, Vincent; Rabbat, Michael
2013-01-01
Associative memories are structures that store data in such a way that it can later be retrieved given only a part of its content -- a sort-of error/erasure-resilience property. They are used in applications ranging from caches and memory management in CPUs to database engines. In this work we study associative memories built on the maximum likelihood principle. We derive minimum residual error rates when the data stored comes from a uniform binary source. Second, we determine the minimum amo...
Maximum likely scale estimation
Loog, Marco; Pedersen, Kim Steenstrup; Markussen, Bo
2005-01-01
A maximum likelihood local scale estimation principle is presented. An actual implementation of the estimation principle uses second order moments of multiple measurements at a fixed location in the image. These measurements consist of Gaussian derivatives possibly taken at several scales and....../or having different derivative orders. Although the principle is applicable to a wide variety of image models, the main focus here is on the Brownian model and its use for scale selection in natural images. Furthermore, in the examples provided, the simplifying assumption is made that the behavior...... of the measurements is completely characterized by all moments up to second order....
F. TopsÃƒÂ¸e
2001-09-01
Full Text Available Abstract: In its modern formulation, the Maximum Entropy Principle was promoted by E.T. Jaynes, starting in the mid-fifties. The principle dictates that one should look for a distribution, consistent with available information, which maximizes the entropy. However, this principle focuses only on distributions and it appears advantageous to bring information theoretical thinking more prominently into play by also focusing on the "observer" and on coding. This view was brought forward by the second named author in the late seventies and is the view we will follow-up on here. It leads to the consideration of a certain game, the Code Length Game and, via standard game theoretical thinking, to a principle of Game Theoretical Equilibrium. This principle is more basic than the Maximum Entropy Principle in the sense that the search for one type of optimal strategies in the Code Length Game translates directly into the search for distributions with maximum entropy. In the present paper we offer a self-contained and comprehensive treatment of fundamentals of both principles mentioned, based on a study of the Code Length Game. Though new concepts and results are presented, the reading should be instructional and accessible to a rather wide audience, at least if certain mathematical details are left aside at a rst reading. The most frequently studied instance of entropy maximization pertains to the Mean Energy Model which involves a moment constraint related to a given function, here taken to represent "energy". This type of application is very well known from the literature with hundreds of applications pertaining to several different elds and will also here serve as important illustration of the theory. But our approach reaches further, especially regarding the study of continuity properties of the entropy function, and this leads to new results which allow a discussion of models with so-called entropy loss. These results have tempted us to speculate over
Regularized maximum correntropy machine
Wang, Jim Jing-Yan
2015-02-12
In this paper we investigate the usage of regularized correntropy framework for learning of classifiers from noisy labels. The class label predictors learned by minimizing transitional loss functions are sensitive to the noisy and outlying labels of training samples, because the transitional loss functions are equally applied to all the samples. To solve this problem, we propose to learn the class label predictors by maximizing the correntropy between the predicted labels and the true labels of the training samples, under the regularized Maximum Correntropy Criteria (MCC) framework. Moreover, we regularize the predictor parameter to control the complexity of the predictor. The learning problem is formulated by an objective function considering the parameter regularization and MCC simultaneously. By optimizing the objective function alternately, we develop a novel predictor learning algorithm. The experiments on two challenging pattern classification tasks show that it significantly outperforms the machines with transitional loss functions.
Economics and Maximum Entropy Production
Lorenz, R. D.
2003-04-01
Price differentials, sales volume and profit can be seen as analogues of temperature difference, heat flow and work or entropy production in the climate system. One aspect in which economic systems exhibit more clarity than the climate is that the empirical and/or statistical mechanical tendency for systems to seek a maximum in production is very evident in economics, in that the profit motive is very clear. Noting the common link between 1/f noise, power laws and Self-Organized Criticality with Maximum Entropy Production, the power law fluctuations in security and commodity prices is not inconsistent with the analogy. There is an additional thermodynamic analogy, in that scarcity is valued. A commodity concentrated among a few traders is valued highly by the many who do not have it. The market therefore encourages via prices the spreading of those goods among a wider group, just as heat tends to diffuse, increasing entropy. I explore some empirical price-volume relationships of metals and meteorites in this context.
Equalized near maximum likelihood detector
2012-01-01
This paper presents new detector that is used to mitigate intersymbol interference introduced by bandlimited channels. This detector is named equalized near maximum likelihood detector which combines nonlinear equalizer and near maximum likelihood detector. Simulation results show that the performance of equalized near maximum likelihood detector is better than the performance of nonlinear equalizer but worse than near maximum likelihood detector.
Cheeseman, Peter; Stutz, John
2005-01-01
A long standing mystery in using Maximum Entropy (MaxEnt) is how to deal with constraints whose values are uncertain. This situation arises when constraint values are estimated from data, because of finite sample sizes. One approach to this problem, advocated by E.T. Jaynes [1], is to ignore this uncertainty, and treat the empirically observed values as exact. We refer to this as the classic MaxEnt approach. Classic MaxEnt gives point probabilities (subject to the given constraints), rather than probability densities. We develop an alternative approach that assumes that the uncertain constraint values are represented by a probability density {e.g: a Gaussian), and this uncertainty yields a MaxEnt posterior probability density. That is, the classic MaxEnt point probabilities are regarded as a multidimensional function of the given constraint values, and uncertainty on these values is transmitted through the MaxEnt function to give uncertainty over the MaXEnt probabilities. We illustrate this approach by explicitly calculating the generalized MaxEnt density for a simple but common case, then show how this can be extended numerically to the general case. This paper expands the generalized MaxEnt concept introduced in a previous paper [3].
Obasa, Temitope O.; Sowunmi, Funmilola Olusola
2012-01-01
Myasis is the infestation of skin by larvae or maggots of a variety of flies. It is a condition that occurs more commonly in adults who are living and/or have visited tropical countries. It rarely occurs in neonates, and even when seen, only few larvae are extracted. This case report describes myasis occurring in an 11-day-old female who had 47 larvae in her skin. PMID:23355934
Temitope O. Obasa
2012-12-01
Full Text Available Myasis is the infestation of skin by larvae or maggots of a variety of flies. It is a condition that occurs more commonly in adults who are living and/or have visited tropical countries. It rarely occurs in neonates, and even when seen, only few larvae are extracted. This case report describes myasis occurring in an 11-day-old female who had 47 larvae in her skin.
Maximum floodflows in the conterminous United States
Crippen, John R.; Bue, Conrad D.
1977-01-01
Peak floodflows from thousands of observation sites within the conterminous United States were studied to provide a guide for estimating potential maximum floodflows. Data were selected from 883 sites with drainage areas of less than 10,000 square miles (25,900 square kilometers) and were grouped into regional sets. Outstanding floods for each region were plotted on graphs, and envelope curves were computed that offer reasonable limits for estimates of maximum floods. The curves indicate that floods may occur that are two to three times greater than those known for most streams.
Maximum-biomass prediction of homofermentative Lactobacillus.
Cui, Shumao; Zhao, Jianxin; Liu, Xiaoming; Chen, Yong Q; Zhang, Hao; Chen, Wei
2016-07-01
Fed-batch and pH-controlled cultures have been widely used for industrial production of probiotics. The aim of this study was to systematically investigate the relationship between the maximum biomass of different homofermentative Lactobacillus and lactate accumulation, and to develop a prediction equation for the maximum biomass concentration in such cultures. The accumulation of the end products and the depletion of nutrients by various strains were evaluated. In addition, the minimum inhibitory concentrations (MICs) of acid anions for various strains at pH 7.0 were examined. The lactate concentration at the point of complete inhibition was not significantly different from the MIC of lactate for all of the strains, although the inhibition mechanism of lactate and acetate on Lactobacillus rhamnosus was different from the other strains which were inhibited by the osmotic pressure caused by acid anions at pH 7.0. When the lactate concentration accumulated to the MIC, the strains stopped growing. The maximum biomass was closely related to the biomass yield per unit of lactate produced (YX/P) and the MIC (C) of lactate for different homofermentative Lactobacillus. Based on the experimental data obtained using different homofermentative Lactobacillus, a prediction equation was established as follows: Xmax - X0 = (0.59 ± 0.02)·YX/P·C.
Angiodysplasia Occurring in Jejunal Diverticulosis
Edward A Jones; Hugh Chaun; Phillip Switzer; David J Clow; Ronald J Hancock
1990-01-01
The first case of angiodysplasia occurring in acquired jejunal diverticulosis is reported. The patient presented with occult gastrointestinal bleeding and chronic anemia, and was created successfully by resection of a 25 cm long segment of jejunum. Possible pathogenetic mechanisms for both angiodysplasia and jejunal diverticulosis are discussed.
OECD Maximum Residue Limit Calculator
With the goal of harmonizing the calculation of maximum residue limits (MRLs) across the Organisation for Economic Cooperation and Development, the OECD has developed an MRL Calculator. View the calculator.
The maximum rate of mammal evolution
Evans, Alistair R.; Jones, David; Boyer, Alison G.; Brown, James H.; Costa, Daniel P.; Ernest, S. K. Morgan; Fitzgerald, Erich M. G.; Fortelius, Mikael; Gittleman, John L.; Hamilton, Marcus J.; Harding, Larisa E.; Lintulaakso, Kari; Lyons, S. Kathleen; Okie, Jordan G.; Saarinen, Juha J.; Sibly, Richard M.; Smith, Felisa A.; Stephens, Patrick R.; Theodor, Jessica M.; Uhen, Mark D.
2012-03-01
How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous-Paleogene (K-Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes.
The maximum rate of mammal evolution
Evans, Alistair R.; Jones, David; Boyer, Alison G.; Brown, James H.; Costa, Daniel P.; Ernest, S. K. Morgan; Fitzgerald, Erich M. G.; Fortelius, Mikael; Gittleman, John L.; Hamilton, Marcus J.; Harding, Larisa E.; Lintulaakso, Kari; Lyons, S. Kathleen; Okie, Jordan G.; Saarinen, Juha J.; Sibly, Richard M.; Smith, Felisa A.; Stephens, Patrick R.; Theodor, Jessica M.; Uhen, Mark D.
2012-01-01
How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous–Paleogene (K–Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes. PMID:22308461
The maximum rate of mammal evolution.
Evans, Alistair R; Jones, David; Boyer, Alison G; Brown, James H; Costa, Daniel P; Ernest, S K Morgan; Fitzgerald, Erich M G; Fortelius, Mikael; Gittleman, John L; Hamilton, Marcus J; Harding, Larisa E; Lintulaakso, Kari; Lyons, S Kathleen; Okie, Jordan G; Saarinen, Juha J; Sibly, Richard M; Smith, Felisa A; Stephens, Patrick R; Theodor, Jessica M; Uhen, Mark D
2012-03-13
How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous-Paleogene (K-Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes.
Maximum margin Bayesian network classifiers.
Pernkopf, Franz; Wohlmayr, Michael; Tschiatschek, Sebastian
2012-03-01
We present a maximum margin parameter learning algorithm for Bayesian network classifiers using a conjugate gradient (CG) method for optimization. In contrast to previous approaches, we maintain the normalization constraints on the parameters of the Bayesian network during optimization, i.e., the probabilistic interpretation of the model is not lost. This enables us to handle missing features in discriminatively optimized Bayesian networks. In experiments, we compare the classification performance of maximum margin parameter learning to conditional likelihood and maximum likelihood learning approaches. Discriminative parameter learning significantly outperforms generative maximum likelihood estimation for naive Bayes and tree augmented naive Bayes structures on all considered data sets. Furthermore, maximizing the margin dominates the conditional likelihood approach in terms of classification performance in most cases. We provide results for a recently proposed maximum margin optimization approach based on convex relaxation. While the classification results are highly similar, our CG-based optimization is computationally up to orders of magnitude faster. Margin-optimized Bayesian network classifiers achieve classification performance comparable to support vector machines (SVMs) using fewer parameters. Moreover, we show that unanticipated missing feature values during classification can be easily processed by discriminatively optimized Bayesian network classifiers, a case where discriminative classifiers usually require mechanisms to complete unknown feature values in the data first.
Maximum Entropy in Drug Discovery
Chih-Yuan Tseng
2014-07-01
Full Text Available Drug discovery applies multidisciplinary approaches either experimentally, computationally or both ways to identify lead compounds to treat various diseases. While conventional approaches have yielded many US Food and Drug Administration (FDA-approved drugs, researchers continue investigating and designing better approaches to increase the success rate in the discovery process. In this article, we provide an overview of the current strategies and point out where and how the method of maximum entropy has been introduced in this area. The maximum entropy principle has its root in thermodynamics, yet since Jaynes’ pioneering work in the 1950s, the maximum entropy principle has not only been used as a physics law, but also as a reasoning tool that allows us to process information in hand with the least bias. Its applicability in various disciplines has been abundantly demonstrated. We give several examples of applications of maximum entropy in different stages of drug discovery. Finally, we discuss a promising new direction in drug discovery that is likely to hinge on the ways of utilizing maximum entropy.
Noack, S; Wohlgemuth, R
1985-02-01
In model tests hazelnuts, soy beans and wheat were fumigated with phosphine (PH3) at non constant concentrations. The influence of different concentration characteristics on the fumigation and the decomposition of phosphine residues was investigated in accordance with the fumigation technique. At the beginning the concentration increases, and after attaining the maximum gradually decreases to zero. The level of residues during the fumigation as well as the behaviour of residues during the storage of the fumigated products was monitored with a gas chromatographic method. The residues correlate with the concentration of phosphine, they also pass through a peak. The rate of decomposition of residues which had been formed in the phase of increasing concentration is greater than the rate of residues of equal magnitude which had been formed during the decreasing phase. When the concentration is even the maximum residue occurs later than the maximum concentration; when there is a steep trend both maximums coincide. This behaviour can be explained by the sorption and diffusion of phosphine. A comparison is made with the phosphine concentration which occurs during fumigation in practice. The parameters which produce a constant concentration trend with only one maximum and a non constant trend with an often increasing and decreasing concentration are discussed. The different behaviour of residues in these cases is described. Conclusions are drawn for the practice of fumigation.
When Yawning Occurs in Elephants
Rossman, Zoë T.; Hart, Benjamin L.; Greco, Brian J.; Young, Debbie; Padfield, Clare; Weidner, Lisa; Gates, Jennifer; Hart, Lynette A.
2017-01-01
Yawning is a widely recognized behavior in mammalian species. One would expect that elephants yawn, although to our knowledge, no one has reported observations of yawning in any species of elephant. After confirming a behavioral pattern matching the criteria of yawning in two Asian elephants (Elephas maximus) in a zoological setting, this study was pursued with nine captive African elephants (Loxodonta africana) at a private reserve in the Western Cape, South Africa, the Knysna Elephant Park. Observations were made in June–September and in December. In the daytime, handlers managed seven of the elephants for guided interactions with visitors. At night, all elephants were maintained in a large enclosure with six having limited outdoor access. With infrared illumination, the elephants were continuously recorded by video cameras. During the nights, the elephants typically had 1–3 recumbent sleeping/resting bouts, each lasting 1–2 h. Yawning was a regular occurrence upon arousal from a recumbency, especially in the final recumbency of the night. Yawning was significantly more frequent in some elephants. Yawning was rare during the daytime and during periods of standing around in the enclosure at night. In six occurrences of likely contagious yawning, one elephant yawned upon seeing another elephant yawning upon arousal from a final recumbency; we recorded the sex and age category of the participants. The generality of yawning in both African and Asian elephants in other environments was documented in video recordings from 39 zoological facilities. In summary, the study provides evidence that yawning does occur in both African and Asian elephants, and in African elephants, yawning was particularly associated with arousal from nighttime recumbencies. PMID:28293560
Greenslade, Thomas B., Jr.
1985-01-01
Discusses a series of experiments performed by Thomas Hope in 1805 which show the temperature at which water has its maximum density. Early data cast into a modern form as well as guidelines and recent data collected from the author provide background for duplicating Hope's experiments in the classroom. (JN)
Abolishing the maximum tension principle
Dabrowski, Mariusz P
2015-01-01
We find the series of example theories for which the relativistic limit of maximum tension $F_{max} = c^2/4G$ represented by the entropic force can be abolished. Among them the varying constants theories, some generalized entropy models applied both for cosmological and black hole horizons as well as some generalized uncertainty principle models.
Abolishing the maximum tension principle
Mariusz P. Da̧browski
2015-09-01
Full Text Available We find the series of example theories for which the relativistic limit of maximum tension Fmax=c4/4G represented by the entropic force can be abolished. Among them the varying constants theories, some generalized entropy models applied both for cosmological and black hole horizons as well as some generalized uncertainty principle models.
Mud Flow Characteristics Occurred in Izuoshima Island, 2013
Takebayashi, H.; Egashira, S.; Fujita, M.
2015-12-01
Landslides and mud flows were occurred in the west part of the Izuoshima Island, Japan on 16 October 2013. The Izuoshima Island is a volcanic island and the land surface is covered by the volcanic ash sediment in 1m depth. Hence, the mud flow with high sediment concentration was formed. The laminar layer is formed in the debris flow from the bed to the fluid surface. On the other hand, the laminar flow is restricted near the bed in the mud flow and the turbulence flow is formed on the laminar flow layer. As a result, the equilibrium slope of the mud flow becomes smaller comparing to the debris flow. In this study, the numerical analysis mud flow model considering the effect of turbulence flow on the equilibrium slope of the mud flow is developed. Subsequently, the model is applied to the mud flow occurred in the Izuoshima Island and discussed the applicability of the model and the flow characteristics of the mud flow. The differences of the horizontal flow areas between the simulated results and the field data are compared and it was found that the outline of the horizontal shape of the flow areas is reproduced well. Furthermore, the horizontal distribution of the erosion and deposition area is reproduced by the numerical analysis well except for the residential area (Kandachi area). Kandachi area is judged as the erosion area by the field observation, but the sediment was deposited in the numerical analysis. It is considered that the 1.5hour heavy rain over 100mm/h after the mud flow makes the discrepancy. The difference of the horizontal distribution of the maximum flow surface elevation between the simulated results and the field data are compared and it was found that the simulated flow depth is overestimated slightly, because of the wider erosion area due to the coarse resolution elevation data. The averaged velocity and the depth of the mud flow was enough large to collapse the houses.
Maximum Genus of Strong Embeddings
Er-ling Wei; Yan-pei Liu; Han Ren
2003-01-01
The strong embedding conjecture states that any 2-connected graph has a strong embedding on some surface. It implies the circuit double cover conjecture: Any 2-connected graph has a circuit double cover.Conversely, it is not true. But for a 3-regular graph, the two conjectures are equivalent. In this paper, a characterization of graphs having a strong embedding with exactly 3 faces, which is the strong embedding of maximum genus, is given. In addition, some graphs with the property are provided. More generally, an upper bound of the maximum genus of strong embeddings of a graph is presented too. Lastly, it is shown that the interpolation theorem is true to planar Halin graph.
Remizov, Ivan D
2009-01-01
In this note, we represent a subdifferential of a maximum functional defined on the space of all real-valued continuous functions on a given metric compact set. For a given argument, $f$ it coincides with the set of all probability measures on the set of points maximizing $f$ on the initial compact set. This complete characterization lies in the heart of several important identities in microeconomics, such as Roy's identity, Sheppard's lemma, as well as duality theory in production and linear programming.
The Testability of Maximum Magnitude
Clements, R.; Schorlemmer, D.; Gonzalez, A.; Zoeller, G.; Schneider, M.
2012-12-01
Recent disasters caused by earthquakes of unexpectedly large magnitude (such as Tohoku) illustrate the need for reliable assessments of the seismic hazard. Estimates of the maximum possible magnitude M at a given fault or in a particular zone are essential parameters in probabilistic seismic hazard assessment (PSHA), but their accuracy remains untested. In this study, we discuss the testability of long-term and short-term M estimates and the limitations that arise from testing such rare events. Of considerable importance is whether or not those limitations imply a lack of testability of a useful maximum magnitude estimate, and whether this should have any influence on current PSHA methodology. We use a simple extreme value theory approach to derive a probability distribution for the expected maximum magnitude in a future time interval, and we perform a sensitivity analysis on this distribution to determine if there is a reasonable avenue available for testing M estimates as they are commonly reported today: devoid of an appropriate probability distribution of their own and estimated only for infinite time (or relatively large untestable periods). Our results imply that any attempt at testing such estimates is futile, and that the distribution is highly sensitive to M estimates only under certain optimal conditions that are rarely observed in practice. In the future we suggest that PSHA modelers be brutally honest about the uncertainty of M estimates, or must find a way to decrease its influence on the estimated hazard.
Alternative Multiview Maximum Entropy Discrimination.
Chao, Guoqing; Sun, Shiliang
2016-07-01
Maximum entropy discrimination (MED) is a general framework for discriminative estimation based on maximum entropy and maximum margin principles, and can produce hard-margin support vector machines under some assumptions. Recently, the multiview version of MED multiview MED (MVMED) was proposed. In this paper, we try to explore a more natural MVMED framework by assuming two separate distributions p1( Θ1) over the first-view classifier parameter Θ1 and p2( Θ2) over the second-view classifier parameter Θ2 . We name the new MVMED framework as alternative MVMED (AMVMED), which enforces the posteriors of two view margins to be equal. The proposed AMVMED is more flexible than the existing MVMED, because compared with MVMED, which optimizes one relative entropy, AMVMED assigns one relative entropy term to each of the two views, thus incorporating a tradeoff between the two views. We give the detailed solving procedure, which can be divided into two steps. The first step is solving our optimization problem without considering the equal margin posteriors from two views, and then, in the second step, we consider the equal posteriors. Experimental results on multiple real-world data sets verify the effectiveness of the AMVMED, and comparisons with MVMED are also reported.
Enhancing arsenic removal from groundwater at household level with naturally occurring iron
Anitha Kumari Sharma
2016-06-01
Full Text Available A supply of drinking water low in Arsenic (As prevents arsenic poisoning. The presence of high concentrations of iron (Fe in groundwater under the alluvial plains of the large rivers in Southeast Asia is a prerequisite for the simple removal of As. This study investigated the mechanisms and possibilities for enhancing As removal with naturally occurring Fe in a reliable, low cost and sustainable way. The results of the study show that As removal with Fe is greatly enhanced by the addition of an oxidizing agent (preferably KMnO4 immediately after the pumping of groundwater. Further enhancement of As removal in the presence of Fe can be achieved by adding a small volume of a concentrated basic solution of MnO4- and AlO2-, which has a combined oxidation, coagulation and buffering capacity. Best results were obtained when this solution was mixed with the groundwater immediately after its pumping until a pale pink color appeared. Maximum required reaction time was 10 minutes and subsequent filtration of the water was able to reduce the As concentration to near zero. Concentrations of MnO4- and AlO2- can be varied in the solution to achieve sufficient As removal to suit different Fe/As ratios and the presence of interfering co-occurring anions.
In-shoe plantar tri-axial stress profiles during maximum-effort cutting maneuvers.
Cong, Yan; Lam, Wing Kai; Cheung, Jason Tak-Man; Zhang, Ming
2014-12-18
Soft tissue injuries, such as anterior cruciate ligament rupture, ankle sprain and foot skin problems, frequently occur during cutting maneuvers. These injuries are often regarded as associated with abnormal joint torque and interfacial friction caused by excessive external and in-shoe shear forces. This study simultaneously investigated the dynamic in-shoe localized plantar pressure and shear stress during lateral shuffling and 45° sidestep cutting maneuvers. Tri-axial force transducers were affixed at the first and second metatarsal heads, lateral forefoot, and heel regions in the midsole of a basketball shoe. Seventeen basketball players executed both cutting maneuvers with maximum efforts. Lateral shuffling cutting had a larger mediolateral braking force than 45° sidestep cutting. This large braking force was concentrated at the first metatarsal head, as indicated by its maximum medial shear stress (312.2 ± 157.0 kPa). During propulsion phase, peak shear stress occurred at the second metatarsal head (271.3 ± 124.3 kPa). Compared with lateral shuffling cutting, 45° sidestep cutting produced larger peak propulsion shear stress (463.0 ± 272.6 kPa) but smaller peak braking shear stress (184.8 ± 181.7 kPa), of which both were found at the first metatarsal head. During both cutting maneuvers, maximum medial and posterior shear stress occurred at the first metatarsal head, whereas maximum pressure occurred at the second metatarsal head. The first and second metatarsal heads sustained relatively high pressure and shear stress and were expected to be susceptible to plantar tissue discomfort or injury. Due to different stress distribution, distinct pressure and shear cushioning mechanisms in basketball footwear might be considered over different foot regions.
Cacti with maximum Kirchhoff index
Wang, Wen-Rui; Pan, Xiang-Feng
2015-01-01
The concept of resistance distance was first proposed by Klein and Randi\\'c. The Kirchhoff index $Kf(G)$ of a graph $G$ is the sum of resistance distance between all pairs of vertices in $G$. A connected graph $G$ is called a cactus if each block of $G$ is either an edge or a cycle. Let $Cat(n;t)$ be the set of connected cacti possessing $n$ vertices and $t$ cycles, where $0\\leq t \\leq \\lfloor\\frac{n-1}{2}\\rfloor$. In this paper, the maximum kirchhoff index of cacti are characterized, as well...
Generic maximum likely scale selection
Pedersen, Kim Steenstrup; Loog, Marco; Markussen, Bo
2007-01-01
The fundamental problem of local scale selection is addressed by means of a novel principle, which is based on maximum likelihood estimation. The principle is generally applicable to a broad variety of image models and descriptors, and provides a generic scale estimation methodology. The focus...... on second order moments of multiple measurements outputs at a fixed location. These measurements, which reflect local image structure, consist in the cases considered here of Gaussian derivatives taken at several scales and/or having different derivative orders....
Efficiency at Maximum Power of Interacting Molecular Machines
Golubeva, Natalia; Imparato, Alberto
2012-01-01
We investigate the efficiency of systems of molecular motors operating at maximum power. We consider two models of kinesin motors on a microtubule: for both the simplified and the detailed model, we find that the many-body exclusion effect enhances the efficiency at maximum power of the many- motor...... system, with respect to the single motor case. Remarkably, we find that this effect occurs in a limited region of the system parameters, compatible with the biologically relevant range....
Maximum Permissible Concentrations and Negligible Concentrations for Rare Earth Elements (REEs)
Sneller FEC; Kalf DF; Weltje L; Wezel AP van; CSR
2000-01-01
In dit rapport worden maximaal toelaatbare risiconiveaus (MTR) en verwaarloosbare risiconiveaus (VR) afgeleid voor zeldzame aardmetalen (ZAM). De geselecteerde ZAMs zijn Yttrium (Y), Lanthanum (La), Cerium (Ce), Praseodymium (Pr), Neodymium (Nd), Samarium (Sm), Gadolinium (Gd), en Dysprosium (Dy
Wezel AP van; Vlaardingen P van; CSR
2001-01-01
In dit rapport zijn maximaal toelaatbare concentratie's en verwaarloosbare concentratie's afgeleid voor diverse aangroeiwerende middelen, welke worden gebruikt als vervanger voor TBT zoals Irgarol 1051, dichlofluanide, ziram, chloorthalonil en TCMTB.
Introduction to naturally occurring radioactive material
Egidi, P.
1997-08-01
Naturally occurring radioactive material (NORM) is everywhere; we are exposed to it every day. It is found in our bodies, the food we eat, the places where we live and work, and in products we use. We are also bathed in a sea of natural radiation coming from the sun and deep space. Living systems have adapted to these levels of radiation and radioactivity. But some industrial practices involving natural resources concentrate these radionuclides to a degree that they may pose risk to humans and the environment if they are not controlled. Other activities, such as flying at high altitudes, expose us to elevated levels of NORM. This session will concentrate on diffuse sources of technologically-enhanced (TE) NORM, which are generally large-volume, low-activity waste streams produced by industries such as mineral mining, ore benefication, production of phosphate Fertilizers, water treatment and purification, and oil and gas production. The majority of radionuclides in TENORM are found in the uranium and thorium decay chains. Radium and its subsequent decay products (radon) are the principal radionuclides used in characterizing the redistribution of TENORM in the environment by human activity. We will briefly review other radionuclides occurring in nature (potassium and rubidium) that contribute primarily to background doses. TENORM is found in many waste streams; for example, scrap metal, sludges, slags, fluids, and is being discovered in industries traditionally not thought of as affected by radionuclide contamination. Not only the forms and volumes, but the levels of radioactivity in TENORM vary. Current discussions about the validity of the linear no dose threshold theory are central to the TENORM issue. TENORM is not regulated by the Atomic Energy Act or other Federal regulations. Control and regulation of TENORM is not consistent from industry to industry nor from state to state. Proposed regulations are moving from concentration-based standards to dose
Introduction to naturally occurring radioactive material
Egidi, P.
1997-08-01
Naturally occurring radioactive material (NORM) is everywhere; we are exposed to it every day. It is found in our bodies, the food we eat, the places where we live and work, and in products we use. We are also bathed in a sea of natural radiation coming from the sun and deep space. Living systems have adapted to these levels of radiation and radioactivity. But some industrial practices involving natural resources concentrate these radionuclides to a degree that they may pose risk to humans and the environment if they are not controlled. Other activities, such as flying at high altitudes, expose us to elevated levels of NORM. This session will concentrate on diffuse sources of technologically-enhanced (TE) NORM, which are generally large-volume, low-activity waste streams produced by industries such as mineral mining, ore benefication, production of phosphate Fertilizers, water treatment and purification, and oil and gas production. The majority of radionuclides in TENORM are found in the uranium and thorium decay chains. Radium and its subsequent decay products (radon) are the principal radionuclides used in characterizing the redistribution of TENORM in the environment by human activity. We will briefly review other radionuclides occurring in nature (potassium and rubidium) that contribute primarily to background doses. TENORM is found in many waste streams; for example, scrap metal, sludges, slags, fluids, and is being discovered in industries traditionally not thought of as affected by radionuclide contamination. Not only the forms and volumes, but the levels of radioactivity in TENORM vary. Current discussions about the validity of the linear no dose threshold theory are central to the TENORM issue. TENORM is not regulated by the Atomic Energy Act or other Federal regulations. Control and regulation of TENORM is not consistent from industry to industry nor from state to state. Proposed regulations are moving from concentration-based standards to dose
Objects of maximum electromagnetic chirality
Fernandez-Corbaton, Ivan
2015-01-01
We introduce a definition of the electromagnetic chirality of an object and show that it has an upper bound. The upper bound is attained if and only if the object is transparent for fields of one handedness (helicity). Additionally, electromagnetic duality symmetry, i.e. helicity preservation upon scattering, turns out to be a necessary condition for reciprocal scatterers to attain the upper bound. We use these results to provide requirements for the design of such extremal scatterers. The requirements can be formulated as constraints on the polarizability tensors for dipolar scatterers or as material constitutive relations. We also outline two applications for objects of maximum electromagnetic chirality: A twofold resonantly enhanced and background free circular dichroism measurement setup, and angle independent helicity filtering glasses.
Maximum mutual information regularized classification
Wang, Jim Jing-Yan
2014-09-07
In this paper, a novel pattern classification approach is proposed by regularizing the classifier learning to maximize mutual information between the classification response and the true class label. We argue that, with the learned classifier, the uncertainty of the true class label of a data sample should be reduced by knowing its classification response as much as possible. The reduced uncertainty is measured by the mutual information between the classification response and the true class label. To this end, when learning a linear classifier, we propose to maximize the mutual information between classification responses and true class labels of training samples, besides minimizing the classification error and reducing the classifier complexity. An objective function is constructed by modeling mutual information with entropy estimation, and it is optimized by a gradient descend method in an iterative algorithm. Experiments on two real world pattern classification problems show the significant improvements achieved by maximum mutual information regularization.
The strong maximum principle revisited
Pucci, Patrizia; Serrin, James
In this paper we first present the classical maximum principle due to E. Hopf, together with an extended commentary and discussion of Hopf's paper. We emphasize the comparison technique invented by Hopf to prove this principle, which has since become a main mathematical tool for the study of second order elliptic partial differential equations and has generated an enormous number of important applications. While Hopf's principle is generally understood to apply to linear equations, it is in fact also crucial in nonlinear theories, such as those under consideration here. In particular, we shall treat and discuss recent generalizations of the strong maximum principle, and also the compact support principle, for the case of singular quasilinear elliptic differential inequalities, under generally weak assumptions on the quasilinear operators and the nonlinearities involved. Our principal interest is in necessary and sufficient conditions for the validity of both principles; in exposing and simplifying earlier proofs of corresponding results; and in extending the conclusions to wider classes of singular operators than previously considered. The results have unexpected ramifications for other problems, as will develop from the exposition, e.g. two point boundary value problems for singular quasilinear ordinary differential equations (Sections 3 and 4); the exterior Dirichlet boundary value problem (Section 5); the existence of dead cores and compact support solutions, i.e. dead cores at infinity (Section 7); Euler-Lagrange inequalities on a Riemannian manifold (Section 9); comparison and uniqueness theorems for solutions of singular quasilinear differential inequalities (Section 10). The case of p-regular elliptic inequalities is briefly considered in Section 11.
Quantum gravity momentum representation and maximum energy
Moffat, J. W.
2016-11-01
We use the idea of the symmetry between the spacetime coordinates xμ and the energy-momentum pμ in quantum theory to construct a momentum space quantum gravity geometry with a metric sμν and a curvature tensor Pλ μνρ. For a closed maximally symmetric momentum space with a constant 3-curvature, the volume of the p-space admits a cutoff with an invariant maximum momentum a. A Wheeler-DeWitt-type wave equation is obtained in the momentum space representation. The vacuum energy density and the self-energy of a charged particle are shown to be finite, and modifications of the electromagnetic radiation density and the entropy density of a system of particles occur for high frequencies.
Maximum entropy estimation of glutamate and glutamine in MR spectroscopic imaging.
Rathi, Yogesh; Ning, Lipeng; Michailovich, Oleg; Liao, HuiJun; Gagoski, Borjan; Grant, P Ellen; Shenton, Martha E; Stern, Robert; Westin, Carl-Fredrik; Lin, Alexander
2014-01-01
Magnetic resonance spectroscopic imaging (MRSI) is often used to estimate the concentration of several brain metabolites. Abnormalities in these concentrations can indicate specific pathology, which can be quite useful in understanding the disease mechanism underlying those changes. Due to higher concentration, metabolites such as N-acetylaspartate (NAA), Creatine (Cr) and Choline (Cho) can be readily estimated using standard Fourier transform techniques. However, metabolites such as Glutamate (Glu) and Glutamine (Gln) occur in significantly lower concentrations and their resonance peaks are very close to each other making it difficult to accurately estimate their concentrations (separately). In this work, we propose to use the theory of 'Spectral Zooming' or high-resolution spectral analysis to separate the Glutamate and Glutamine peaks and accurately estimate their concentrations. The method works by estimating a unique power spectral density, which corresponds to the maximum entropy solution of a zero-mean stationary Gaussian process. We demonstrate our estimation technique on several physical phantom data sets as well as on in-vivo brain spectroscopic imaging data. The proposed technique is quite general and can be used to estimate the concentration of any other metabolite of interest.
Maximum entropy production in daisyworld
Maunu, Haley A.; Knuth, Kevin H.
2012-05-01
Daisyworld was first introduced in 1983 by Watson and Lovelock as a model that illustrates how life can influence a planet's climate. These models typically involve modeling a planetary surface on which black and white daisies can grow thus influencing the local surface albedo and therefore also the temperature distribution. Since then, variations of daisyworld have been applied to study problems ranging from ecological systems to global climate. Much of the interest in daisyworld models is due to the fact that they enable one to study self-regulating systems. These models are nonlinear, and as such they exhibit sensitive dependence on initial conditions, and depending on the specifics of the model they can also exhibit feedback loops, oscillations, and chaotic behavior. Many daisyworld models are thermodynamic in nature in that they rely on heat flux and temperature gradients. However, what is not well-known is whether, or even why, a daisyworld model might settle into a maximum entropy production (MEP) state. With the aim to better understand these systems, this paper will discuss what is known about the role of MEP in daisyworld models.
Maximum stellar iron core mass
F W Giacobbe
2003-03-01
An analytical method of estimating the mass of a stellar iron core, just prior to core collapse, is described in this paper. The method employed depends, in part, upon an estimate of the true relativistic mass increase experienced by electrons within a highly compressed iron core, just prior to core collapse, and is signiﬁcantly different from a more typical Chandrasekhar mass limit approach. This technique produced a maximum stellar iron core mass value of 2.69 × 1030 kg (1.35 solar masses). This mass value is very near to the typical mass values found for neutron stars in a recent survey of actual neutron star masses. Although slightly lower and higher neutron star masses may also be found, lower mass neutron stars are believed to be formed as a result of enhanced iron core compression due to the weight of non-ferrous matter overlying the iron cores within large stars. And, higher mass neutron stars are likely to be formed as a result of fallback or accretion of additional matter after an initial collapse event involving an iron core having a mass no greater than 2.69 × 1030 kg.
Maximum Matchings via Glauber Dynamics
Jindal, Anant; Pal, Manjish
2011-01-01
In this paper we study the classic problem of computing a maximum cardinality matching in general graphs $G = (V, E)$. The best known algorithm for this problem till date runs in $O(m \\sqrt{n})$ time due to Micali and Vazirani \\cite{MV80}. Even for general bipartite graphs this is the best known running time (the algorithm of Karp and Hopcroft \\cite{HK73} also achieves this bound). For regular bipartite graphs one can achieve an $O(m)$ time algorithm which, following a series of papers, has been recently improved to $O(n \\log n)$ by Goel, Kapralov and Khanna (STOC 2010) \\cite{GKK10}. In this paper we present a randomized algorithm based on the Markov Chain Monte Carlo paradigm which runs in $O(m \\log^2 n)$ time, thereby obtaining a significant improvement over \\cite{MV80}. We use a Markov chain similar to the \\emph{hard-core model} for Glauber Dynamics with \\emph{fugacity} parameter $\\lambda$, which is used to sample independent sets in a graph from the Gibbs Distribution \\cite{V99}, to design a faster algori...
2011-01-10
...: Establishing Maximum Allowable Operating Pressure or Maximum Operating Pressure Using Record Evidence, and... facilities of their responsibilities, under Federal integrity management (IM) regulations, to perform... system, especially when calculating Maximum Allowable Operating Pressure (MAOP) or Maximum Operating...
The Sherpa Maximum Likelihood Estimator
Nguyen, D.; Doe, S.; Evans, I.; Hain, R.; Primini, F.
2011-07-01
A primary goal for the second release of the Chandra Source Catalog (CSC) is to include X-ray sources with as few as 5 photon counts detected in stacked observations of the same field, while maintaining acceptable detection efficiency and false source rates. Aggressive source detection methods will result in detection of many false positive source candidates. Candidate detections will then be sent to a new tool, the Maximum Likelihood Estimator (MLE), to evaluate the likelihood that a detection is a real source. MLE uses the Sherpa modeling and fitting engine to fit a model of a background and source to multiple overlapping candidate source regions. A background model is calculated by simultaneously fitting the observed photon flux in multiple background regions. This model is used to determine the quality of the fit statistic for a background-only hypothesis in the potential source region. The statistic for a background-plus-source hypothesis is calculated by adding a Gaussian source model convolved with the appropriate Chandra point spread function (PSF) and simultaneously fitting the observed photon flux in each observation in the stack. Since a candidate source may be located anywhere in the field of view of each stacked observation, a different PSF must be used for each observation because of the strong spatial dependence of the Chandra PSF. The likelihood of a valid source being detected is a function of the two statistics (for background alone, and for background-plus-source). The MLE tool is an extensible Python module with potential for use by the general Chandra user.
Vestige: Maximum likelihood phylogenetic footprinting
Maxwell Peter
2005-05-01
Full Text Available Abstract Background Phylogenetic footprinting is the identification of functional regions of DNA by their evolutionary conservation. This is achieved by comparing orthologous regions from multiple species and identifying the DNA regions that have diverged less than neutral DNA. Vestige is a phylogenetic footprinting package built on the PyEvolve toolkit that uses probabilistic molecular evolutionary modelling to represent aspects of sequence evolution, including the conventional divergence measure employed by other footprinting approaches. In addition to measuring the divergence, Vestige allows the expansion of the definition of a phylogenetic footprint to include variation in the distribution of any molecular evolutionary processes. This is achieved by displaying the distribution of model parameters that represent partitions of molecular evolutionary substitutions. Examination of the spatial incidence of these effects across regions of the genome can identify DNA segments that differ in the nature of the evolutionary process. Results Vestige was applied to a reference dataset of the SCL locus from four species and provided clear identification of the known conserved regions in this dataset. To demonstrate the flexibility to use diverse models of molecular evolution and dissect the nature of the evolutionary process Vestige was used to footprint the Ka/Ks ratio in primate BRCA1 with a codon model of evolution. Two regions of putative adaptive evolution were identified illustrating the ability of Vestige to represent the spatial distribution of distinct molecular evolutionary processes. Conclusion Vestige provides a flexible, open platform for phylogenetic footprinting. Underpinned by the PyEvolve toolkit, Vestige provides a framework for visualising the signatures of evolutionary processes across the genome of numerous organisms simultaneously. By exploiting the maximum-likelihood statistical framework, the complex interplay between mutational
Changes in context and perception of maximum reaching height.
Wagman, Jeffrey B; Day, Brian M
2014-01-01
Successfully performing a given behavior requires flexibility in both perception and behavior. In particular, doing so requires perceiving whether that behavior is possible across the variety of contexts in which it might be performed. Three experiments investigated how (changes in) context (ie point of observation and intended reaching task) influenced perception of maximum reaching height. The results of experiment 1 showed that perceived maximum reaching height more closely reflected actual reaching ability when perceivers occupied a point of observation that was compatible with that required for the reaching task. The results of experiments 2 and 3 showed that practice perceiving maximum reaching height from a given point of observation improved perception of maximum reaching height from a different point of observation, regardless of whether such practice occurred at a compatible or incompatible point of observation. In general, such findings show bounded flexibility in perception of affordances and are thus consistent with a description of perceptual systems as smart perceptual devices.
Kuracina Richard
2015-06-01
Full Text Available The article deals with the measurement of maximum explosion pressure and the maximum rate of exposure pressure rise of wood dust cloud. The measurements were carried out according to STN EN 14034-1+A1:2011 Determination of explosion characteristics of dust clouds. Part 1: Determination of the maximum explosion pressure pmax of dust clouds and the maximum rate of explosion pressure rise according to STN EN 14034-2+A1:2012 Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dtmax of dust clouds. The wood dust cloud in the chamber is achieved mechanically. The testing of explosions of wood dust clouds showed that the maximum value of the pressure was reached at the concentrations of 450 g / m3 and its value is 7.95 bar. The fastest increase of pressure was observed at the concentrations of 450 g / m3 and its value was 68 bar / s.
Pushing concentration of stationary solar concentrators to the limit.
Winston, Roland; Zhang, Weiya
2010-04-26
We give the theoretical limit of concentration allowed by nonimaging optics for stationary solar concentrators after reviewing sun- earth geometry in direction cosine space. We then discuss the design principles that we follow to approach the maximum concentration along with examples including a hollow CPC trough, a dielectric CPC trough, and a 3D dielectric stationary solar concentrator which concentrates sun light four times (4x), eight hours per day year around.
陈嘉; 李拥军; 杨文萍
2009-01-01
Objective To study the effects of carbon disulfide exposure within the national maximum allowable concentration(MAC) on blood pressure and electrocardiogram, and associations with selected factors. Methods Workers in a chemical fiber factory were divided into two groups based on the type of work: a high exposure group (HEG) of 821 individuals and a low exposure group (LEG) of 259. The CS_2 concentration at workplace was controlled under the national MAC. A set of 250 randomly selected people taking routine phys-ical check-ups in the same period and hospital constituted the control group. The systolic blood pressure (SBP) and diastolic hlood pressure (DBP) were measured on the arm, and the pulse pressure (PP) and mean arterial blood pressure (MABP) were calculated based on SBP and DBP. The blood pressure data, along with the results of the routine 12-lead electrocardiography taken at rest and records on gender, age, years of work, type of work, and concentrations of triglycerol, cholesterol, and glucose in blood, were compiled for analyses. Risk factors upon CS_2 exposure for the increase of blood pressure and occurrence of electrocardiogram abnor-malities were identified and rationalized. Results Significant difference (P<0.01) in the average values of SBP, DBP, MABP, and the corresponding abnormality incident rates was found between HEG and LEG, and between HEG and the control group. For both HEG and LEG, the incident rate of DBP abnormality(high DBP) is nearly two times as high as that of SBP. Type of work is the largest risk factor in both the high SBP and high DBP subgroups, with odds ratios (OR) of 2.086 and 2.331 respectively, and high CS_2 exposure presents more than double the risk than low exposure. On the incident rate of ECG abnormalities, beth exposure groups are significantly different (P<0.01) to the control group. High SBP in LEG and high DBP in HEG were found to be significant risk factors (OR = 3.531 and 1.638 respectively), while blood glucose
Optimization of agitation and aeration conditions for maximum virginiamycin production.
Shioya, S; Morikawa, M; Kajihara, Y; Shimizu, H
1999-02-01
To maximize the productivity of virginiamycin, which is a commercially important antibiotic as an animal feed additive, an empirical approach was employed in the batch culture of Streptomyces virginiae. Here, the effects of dissolved oxygen (DO) concentration and agitation speed on the maximum cell concentration at the production phase, as well as on the productivity of virginiamycin, were investigated. To maintain the DO concentration in the fermentor at a certain level, either the agitation speed or the inlet oxygen concentration of the supply gas was manipulated. It was found that increasing the agitation speed had a positive effect on the antibiotic productivity independent of the DO concentration. The optimum DO concentration, agitation speed and addition of an autoregulator, virginiae butanolide C (VB-C), were determined to maximize virginiamycin productivity. The optimal strategy was to start the cultivation at 450 rpm and to continue until the DO concentration reached 80%. After reaching 80%, the DO concentration was maintained at this level by changing the agitation speed, up to a maximum of 800 rpm. The addition of an optimal amount of the autoregulator VB-C in an experiment resulted in the maximal production of virginiamycin M (399 mg/l), which was about 1.8-fold those obtained previously.
Theoretical Estimate of Maximum Possible Nuclear Explosion
Bethe, H. A.
1950-01-31
The maximum nuclear accident which could occur in a Na-cooled, Be moderated, Pu and power producing reactor is estimated theoretically. (T.R.H.) 2O82 Results of nuclear calculations for a variety of compositions of fast, heterogeneous, sodium-cooled, U-235-fueled, plutonium- and power-producing reactors are reported. Core compositions typical of plate-, pin-, or wire-type fuel elements and with uranium as metal, alloy, and oxide were considered. These compositions included atom ratios in the following range: U-23B to U-235 from 2 to 8; sodium to U-235 from 1.5 to 12; iron to U-235 from 5 to 18; and vanadium to U-235 from 11 to 33. Calculations were performed to determine the effect of lead and iron reflectors between the core and blanket. Both natural and depleted uranium were evaluated as the blanket fertile material. Reactors were compared on a basis of conversion ratio, specific power, and the product of both. The calculated results are in general agreement with the experimental results from fast reactor assemblies. An analysis of the effect of new cross-section values as they became available is included. (auth)
Receiver function estimated by maximum entropy deconvolution
吴庆举; 田小波; 张乃铃; 李卫平; 曾融生
2003-01-01
Maximum entropy deconvolution is presented to estimate receiver function, with the maximum entropy as the rule to determine auto-correlation and cross-correlation functions. The Toeplitz equation and Levinson algorithm are used to calculate the iterative formula of error-predicting filter, and receiver function is then estimated. During extrapolation, reflective coefficient is always less than 1, which keeps maximum entropy deconvolution stable. The maximum entropy of the data outside window increases the resolution of receiver function. Both synthetic and real seismograms show that maximum entropy deconvolution is an effective method to measure receiver function in time-domain.
Maximum Power from a Solar Panel
Michael Miller
2010-01-01
Full Text Available Solar energy has become a promising alternative to conventional fossil fuel sources. Solar panels are used to collect solar radiation and convert it into electricity. One of the techniques used to maximize the effectiveness of this energy alternative is to maximize the power output of the solar collector. In this project the maximum power is calculated by determining the voltage and the current of maximum power. These quantities are determined by finding the maximum value for the equation for power using differentiation. After the maximum values are found for each time of day, each individual quantity, voltage of maximum power, current of maximum power, and maximum power is plotted as a function of the time of day.
OCCURENCE OF MERCURY IN PET FOOD
M.C. Abete
2013-02-01
Full Text Available Mercury levels in 61 complete pet feed containing fish were evaluated. In five samples a mercury content exceeding the maximum residues level (0.4 mg/kg was detected. The statistical evaluation didn’t show a significant correlation between the percentage of fish in feedingstuffs and the contamination level.
Hodder, Joanne N; Keir, Peter J
2013-10-01
Muscle specific maximal voluntary isometric contractions (MVIC) are commonly used to elicit reference amplitudes to normalize electromyographic signals (EMG). It has been questioned whether this is appropriate for normalizing EMG from dynamic contractions. This study compares EMG amplitude when shoulder muscle activity from dynamic contractions is normalized to isometric and isokinetic maximal excitation as well as a hybrid approach currently used in our laboratory. Anterior, middle and posterior deltoid, upper and lower trapezius, pectoralis major, latissimus dorsi and infraspinatus were monitored during (1) manually resisted MVICs, and (2) maximum voluntary dynamic concentric contractions (MVDC) on an isokinetic dynamometer. Dynamic contractions were performed (a) at 30°/s about the longitudinal, frontal and sagittal axes of the shoulder, and (b) during manual bi-rotation of a tilted wheel at 120°/s. EMG from the wheel task was normalized to the maximum excitation from (i) the muscle specific MVIC, (ii) from any MVIC (MVICALL), (iii) for any MVDC, (iv) from any exertion (maximum experimental excitation, MEE). Mean EMG from the wheel task was up to 45% greater when normalized to muscle specific isometric contractions (method i) than when normalized to MEE (method iv). Seventy-five percent of MEE's occurred during MVDCs. This study presents an 20 useful and effective process for obtaining the greatest excitation from the shoulder muscles when normalizing dynamic efforts.
Efficiency of autonomous soft nanomachines at maximum power.
Seifert, Udo
2011-01-14
We consider nanosized artificial or biological machines working in steady state enforced by imposing nonequilibrium concentrations of solutes or by applying external forces, torques, or electric fields. For unicyclic and strongly coupled multicyclic machines, efficiency at maximum power is not bounded by the linear response value 1/2. For strong driving, it can even approach the thermodynamic limit 1. Quite generally, such machines fall into three different classes characterized, respectively, as "strong and efficient," "strong and inefficient," and "balanced." For weakly coupled multicyclic machines, efficiency at maximum power has lost any universality even in the linear response regime.
The inverse maximum dynamic flow problem
BAGHERIAN; Mehri
2010-01-01
We consider the inverse maximum dynamic flow (IMDF) problem.IMDF problem can be described as: how to change the capacity vector of a dynamic network as little as possible so that a given feasible dynamic flow becomes a maximum dynamic flow.After discussing some characteristics of this problem,it is converted to a constrained minimum dynamic cut problem.Then an efficient algorithm which uses two maximum dynamic flow algorithms is proposed to solve the problem.
Maximum permissible voltage of YBCO coated conductors
Wen, J.; Lin, B.; Sheng, J.; Xu, J.; Jin, Z. [Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China); Hong, Z., E-mail: zhiyong.hong@sjtu.edu.cn [Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China); Wang, D.; Zhou, H.; Shen, X.; Shen, C. [Qingpu Power Supply Company, State Grid Shanghai Municipal Electric Power Company, Shanghai (China)
2014-06-15
Highlights: • We examine three kinds of tapes’ maximum permissible voltage. • We examine the relationship between quenching duration and maximum permissible voltage. • Continuous I{sub c} degradations under repetitive quenching where tapes reaching maximum permissible voltage. • The relationship between maximum permissible voltage and resistance, temperature. - Abstract: Superconducting fault current limiter (SFCL) could reduce short circuit currents in electrical power system. One of the most important thing in developing SFCL is to find out the maximum permissible voltage of each limiting element. The maximum permissible voltage is defined as the maximum voltage per unit length at which the YBCO coated conductors (CC) do not suffer from critical current (I{sub c}) degradation or burnout. In this research, the time of quenching process is changed and voltage is raised until the I{sub c} degradation or burnout happens. YBCO coated conductors test in the experiment are from American superconductor (AMSC) and Shanghai Jiao Tong University (SJTU). Along with the quenching duration increasing, the maximum permissible voltage of CC decreases. When quenching duration is 100 ms, the maximum permissible of SJTU CC, 12 mm AMSC CC and 4 mm AMSC CC are 0.72 V/cm, 0.52 V/cm and 1.2 V/cm respectively. Based on the results of samples, the whole length of CCs used in the design of a SFCL can be determined.
Gale, Robert W.
2007-01-01
The Commonwealth of Virginia Department of Environmental Quality, working closely with the State of West Virginia Department of Environmental Protection and the U.S. Environmental Protection Agency is undertaking a polychlorinated biphenyl source assessment study for the Bluestone River watershed. The study area extends from the Bluefield area of Virginia and West Virginia, targets the Bluestone River and tributaries suspected of contributing to polychlorinated biphenyl, polychlorinated dibenzo-p-dioxin and dibenzofuran contamination, and includes sites near confluences of Big Branch, Brush Fork, and Beaver Pond Creek. The objectives of this study were to gather information about the concentrations, patterns, and distribution of these contaminants at specific study sites to expand current knowledge about polychlorinated biphenyl impacts and to identify potential new sources of contamination. Semipermeable membrane devices were used to integratively accumulate the dissolved fraction of the contaminants at each site. Performance reference compounds were added prior to deployment and used to determine site-specific sampling rates, enabling estimations of time-weighted average water concentrations during the deployed period. Minimum estimated concentrations of polychlorinated biphenyl congeners in water were about 1 picogram per liter per congener, and total concentrations at study sites ranged from 130 to 18,000 picograms per liter. The lowest concentration was 130 picograms per liter, about threefold greater than total hypothetical concentrations from background levels in field blanks. Polychlorinated biphenyl concentrations in water fell into three groups of sites: low (130-350 picogram per liter); medium (640-3,500 picogram per liter; and high (11,000-18,000 picogram per liter). Concentrations at the high sites, Beacon Cave and Beaverpond Branch at the Resurgence, were about four- to sixfold higher than concentrations estimated for the medium group of sites
Allergies and Asthma: They Often Occur Together
... you miserable. A lot, as it turns out. Allergies and asthma often occur together. The same substances that trigger your hay fever symptoms, such as pollen, dust mites and pet dander, may also cause asthma signs ...
Multiple Primary Cancers: Simultaneously Occurring Prostate ...
2016-05-20
May 20, 2016 ... occurring prostate cancer and other primary tumors-our experience and literature ... carcinoma, primary liver cell carcinoma, and thyroid follicular carcinoma in both ..... malignancies in women with papillary thyroid cancer.
ST elevation occurring during stress testing
Diana Malouf
2016-04-01
Full Text Available A case is presented of significant reversible ST elevation occurring during treadmill testing, and the coronary anatomy and subsequent course are described, indicating that ischemia is a potential cause of this electrocardiographic finding.
Maximum Likelihood Under Response Biased Sampling\\ud
Chambers, Raymond; Dorfman, Alan; Wang, Suojin
2003-01-01
Informative sampling occurs when the probability of inclusion in sample depends on\\ud the value of the survey response variable. Response or size biased sampling is a\\ud particular case of informative sampling where the inclusion probability is proportional\\ud to the value of this variable. In this paper we describe a general model for response\\ud biased sampling, which we call array sampling, and develop maximum likelihood and\\ud estimating equation theory appropriate to this situation. The ...
Study of maximum pressure for composite hepta-tubular powders
M. C. Gupta
1959-10-01
Full Text Available In this paper the expressions for maximum pressure occurring positions in the case of composite hepta-tubular powers used in conventional guns and the corresponding conditions have been derived under certain conditions, viz., the value of n, the ratio of specific heats, has been assumed to be the same for both the charges and the covolume corrections have not been neglected.
Trichotillomania and Co-occurring Anxiety
Grant, Jon E.; Redden, Sarah A.; Leppink, Eric W.; Chamberlain, Samuel R.
2017-01-01
Background Trichotillomania appears to be a fairly common disorder, with high rates of co-occurring anxiety disorders. Many individuals with trichotillomania also report that pulling worsens during periods of increased anxiety. Even with these clinical links to anxiety, little research has explored whether trichotillomania with co-occurring anxiety is a meaningful subtype. Methods 165 adults with trichotillomania were examined on a variety of clinical measures including symptom severity, functioning, and comorbidity. Participants also underwent cognitive testing assessing motor inhibition and cognitive flexibility. Clinical features and cognitive functioning were compared between those with current co-occurring anxiety disorders (i.e. social anxiety, generalized anxiety disorder, panic disorder, and anxiety disorder NOS) (n=38) and those with no anxiety disorder (n=127). Results Participants with trichotillomania and co-occurring anxiety reported significantly worse hair pulling symptoms, were more likely to have co-occurring depression, and were more likely to have a first-degree relative with obsessive compulsive disorder. Those with anxiety disorders also exhibited significantly worse motor inhibitory performance on a task of motor inhibition (stop-signal task). Conclusions This study suggests that anxiety disorders affect the clinical presentation of hair pulling behavior. Further research is needed to validate our findings and to consider whether treatments should be specially tailored differently for adults with trichotillomania who have co-occurring anxiety disorders, or more pronounced cognitive impairment. PMID:27668531
2013-01-01
A concentration device (2) for filter filtration concentration of particles (4) from a volume of a fluid (6). The concentration device (2) comprises a filter (8) configured to filter particles (4) of a predefined size in the volume of the fluid (6). The concentration device (2) comprises...
CO2 maximum in the oxygen minimum zone (OMZ
V. Garçon
2011-02-01
Full Text Available Oxygen minimum zones (OMZs, known as suboxic layers which are mainly localized in the Eastern Boundary Upwelling Systems, have been expanding since the 20th "high CO2" century, probably due to global warming. OMZs are also known to significantly contribute to the oceanic production of N2O, a greenhouse gas (GHG more efficient than CO2. However, the contribution of the OMZs on the oceanic sources and sinks budget of CO2, the main GHG, still remains to be established. We present here the dissolved inorganic carbon (DIC structure, associated locally with the Chilean OMZ and globally with the main most intense OMZs (O2−1 in the open ocean. To achieve this, we examine simultaneous DIC and O2 data collected off Chile during 4 cruises (2000–2002 and a monthly monitoring (2000–2001 in one of the shallowest OMZs, along with international DIC and O2 databases and climatology for other OMZs. High DIC concentrations (>2225 μmol kg−1, up to 2350 μmol kg−1 have been reported over the whole OMZ thickness, allowing the definition for all studied OMZs a Carbon Maximum Zone (CMZ. Locally off Chile, the shallow cores of the OMZ and CMZ are spatially and temporally collocated at 21° S, 30° S and 36° S despite different cross-shore, long-shore and seasonal configurations. Globally, the mean state of the main OMZs also corresponds to the largest carbon reserves of the ocean in subsurface waters. The CMZs-OMZs could then induce a positive feedback for the atmosphere during upwelling activity, as potential direct local sources of CO2. The CMZ paradoxically presents a slight "carbon deficit" in its core (~10%, meaning a DIC increase from the oxygenated ocean to the OMZ lower than the corresponding O2 decrease (assuming classical C/O molar ratios. This "carbon deficit" would be related to regional thermal mechanisms affecting faster O2 than DIC (due to the carbonate buffer effect and occurring upstream in warm waters (e.g., in the Equatorial Divergence
Spatio-temporal observations of tertiary ozone maximum
V. F. Sofieva
2009-03-01
Full Text Available We present spatio-temporal distributions of tertiary ozone maximum (TOM, based on GOMOS (Global Ozone Monitoring by Occultation of Stars ozone measurements in 2002–2006. The tertiary ozone maximum is typically observed in the high-latitude winter mesosphere at altitude ~72 km. Although the explanation for this phenomenon has been found recently – low concentrations of odd-hydrogen cause the subsequent decrease in odd-oxygen losses – models have had significant deviations from existing observations until recently. Good coverage of polar night regions by GOMOS data has allowed for the first time obtaining spatial and temporal observational distributions of night-time ozone mixing ratio in the mesosphere.
The distributions obtained from GOMOS data have specific features, which are variable from year to year. In particular, due to a long lifetime of ozone in polar night conditions, the downward transport of polar air by the meridional circulation is clearly observed in the tertiary ozone maximum time series. Although the maximum tertiary ozone mixing ratio is achieved close to the polar night terminator (as predicted by the theory, TOM can be observed also at very high latitudes, not only in the beginning and at the end, but also in the middle of winter. We have compared the observational spatio-temporal distributions of tertiary ozone maximum with that obtained using WACCM (Whole Atmosphere Community Climate Model and found that the specific features are reproduced satisfactorily by the model.
Since ozone in the mesosphere is very sensitive to HO_{x} concentrations, energetic particle precipitation can significantly modify the shape of the ozone profiles. In particular, GOMOS observations have shown that the tertiary ozone maximum was temporarily destroyed during the January 2005 and December 2006 solar proton events as a result of the HO_{x} enhancement from the increased ionization.
Rose, Caspar
2014-01-01
, especially minority shareholders. Concentrated ownership is associated with benefits and costs. Concentrated ownership may reduce agency costs by increased monitoring of top management. However, concentrated ownership may also provide dominating owners with private benefits of control.......This entry summarizes the main theoretical contributions and empirical findings in relation to concentrated ownership from a law and economics perspective. The various forms of concentrated ownership are described as well as analyzed from the perspective of the legal protection of investors...
Generalised maximum entropy and heterogeneous technologies
Oude Lansink, A.G.J.M.
1999-01-01
Generalised maximum entropy methods are used to estimate a dual model of production on panel data of Dutch cash crop farms over the period 1970-1992. The generalised maximum entropy approach allows a coherent system of input demand and output supply equations to be estimated for each farm in the sam
20 CFR 229.48 - Family maximum.
2010-04-01
... month on one person's earnings record is limited. This limited amount is called the family maximum. The family maximum used to adjust the social security overall minimum rate is based on the employee's Overall..., when any of the persons entitled to benefits on the insured individual's compensation would, except...
The maximum rotation of a galactic disc
Bottema, R
1997-01-01
The observed stellar velocity dispersions of galactic discs show that the maximum rotation of a disc is on average 63% of the observed maximum rotation. This criterion can, however, not be applied to small or low surface brightness (LSB) galaxies because such systems show, in general, a continuously
Duality of Maximum Entropy and Minimum Divergence
Shinto Eguchi
2014-06-01
Full Text Available We discuss a special class of generalized divergence measures by the use of generator functions. Any divergence measure in the class is separated into the difference between cross and diagonal entropy. The diagonal entropy measure in the class associates with a model of maximum entropy distributions; the divergence measure leads to statistical estimation via minimization, for arbitrarily giving a statistical model. The dualistic relationship between the maximum entropy model and the minimum divergence estimation is explored in the framework of information geometry. The model of maximum entropy distributions is characterized to be totally geodesic with respect to the linear connection associated with the divergence. A natural extension for the classical theory for the maximum likelihood method under the maximum entropy model in terms of the Boltzmann-Gibbs-Shannon entropy is given. We discuss the duality in detail for Tsallis entropy as a typical example.
Hamid Molahoseini
2014-04-01
Full Text Available To study the potential uptake and accumulation of some essential elements and cadmium, a field experiment was conducted using three plants (sunflower, turnip, and forage corn in a randomized complete block design (RCBD with three replications in a soil classified as Typic Haplogypsids under wastewater irrigation. The experiment site was selected in the farmfields located in Varamin region in southern Tehran, Iran (2005. The results showed that maximum concentrations of nitrogen, phosphorus, zinc, copper, and cadmium in sunflower were 6.05% , 1.27%, 97.27, 22.84 and 0.54 mgkg-1 respectively. The highest accumulation of nitrogen, phosphorus, zinc, and copper occurred in grain and cadmium in sunflower leaves. The maximum concentration of potassium and nitrate occurred in turnip leaves, while the maximum concentrations of iron and manganese were recorded in the root and leaves of forage corn, res pectively.
Percieved functions of naturally occurring autobiographical memories
Treebak, L. S.; Henriksen, J. R.; Lundhus, S.
2005-01-01
The main empirical reference on functions of autobiographical memories is still Hyman & Faries (1992) who used the cue-word-method and retrospective judgements. We used diaries to sample naturally occurring autobiographical memories and participants? perceived use of these. Results partly replicate...
Matić Vesna
2016-01-01
Full Text Available Concentration risk has been gaining a special dimension in the contemporary financial and economic environment. Financial institutions are exposed to this risk mainly in the field of lending, mostly through their credit activities and concentration of credit portfolios. This refers to the concentration of different exposures within a single risk category (credit risk, market risk, operational risk, liquidity risk.
曾学平
2013-01-01
目的：研究大量输血前后血钾浓度的变化情况以及输血后高钾血症发生的影响因素。方法：将132例非挤压伤患者随机分为非输血治疗组(对照组)、大量输血治疗组(观察组)，比较两组患者输血前后的血钾变化情况，同时分析其相关的影响因素。结果：输血前、后及手术过程中两组患者的血钾水平未见明显差异，但术后12 h内，观察组患者的血钾水平明显高于对照组，差异具有统计学意义(t＝1.562，P＜0.05)，术后12 h之外两组患者的血钾水平比较未见明显差异。结论：临床上大量输血并不是引起患者高钾血症的主要原因，但某些患者在大量输血后会出现血钾升高，因此在进行输血过程中应对患者血钾水平进行密切监测和观察，且应注意肾功能变化，以排除由于肾功能受损导致的血钾升高，降低并发症的发生率。%Objective: To study the changes of blood transfusion and blood potassium concentration and the occurrence of hyperkalemia after transfusion factors influence. Methods: In our hospital from 2010 April to select the diagnosis and treatment of -2012 in April 132 cases of non crush injury patients, these patients were randomly divided into two groups, the control group without blood transfusion therapy group, the observation group for massive transfusion treatment group, changes of serum potassium were compared between the two groups before and after transfusion, and to analyze the related effect factors. Results:The serum potassium levels showed no significant difference between the two groups of patients before and after blood transfusion, operation process, but the postoperative within 12h, observation of blood potassium level group were significantly higher than that in control group, the difference is significant, with statistical significance (t=1.562, P<0.05), in addition to 12h after operation, blood potassium levels between the two
A dual method for maximum entropy restoration
Smith, C. B.
1979-01-01
A simple iterative dual algorithm for maximum entropy image restoration is presented. The dual algorithm involves fewer parameters than conventional minimization in the image space. Minicomputer test results for Fourier synthesis with inadequate phantom data are given.
Maximum Throughput in Multiple-Antenna Systems
Zamani, Mahdi
2012-01-01
The point-to-point multiple-antenna channel is investigated in uncorrelated block fading environment with Rayleigh distribution. The maximum throughput and maximum expected-rate of this channel are derived under the assumption that the transmitter is oblivious to the channel state information (CSI), however, the receiver has perfect CSI. First, we prove that in multiple-input single-output (MISO) channels, the optimum transmission strategy maximizing the throughput is to use all available antennas and perform equal power allocation with uncorrelated signals. Furthermore, to increase the expected-rate, multi-layer coding is applied. Analogously, we establish that sending uncorrelated signals and performing equal power allocation across all available antennas at each layer is optimum. A closed form expression for the maximum continuous-layer expected-rate of MISO channels is also obtained. Moreover, we investigate multiple-input multiple-output (MIMO) channels, and formulate the maximum throughput in the asympt...
Photoemission spectromicroscopy with MAXIMUM at Wisconsin
Ng, W.; Ray-Chaudhuri, A.K.; Cole, R.K.; Wallace, J.; Crossley, S.; Crossley, D.; Chen, G.; Green, M.; Guo, J.; Hansen, R.W.C.; Cerrina, F.; Margaritondo, G. (Dept. of Electrical Engineering, Dept. of Physics and Synchrotron Radiation Center, Univ. of Wisconsin, Madison (USA)); Underwood, J.H.; Korthright, J.; Perera, R.C.C. (Center for X-ray Optics, Accelerator and Fusion Research Div., Lawrence Berkeley Lab., CA (USA))
1990-06-01
We describe the development of the scanning photoemission spectromicroscope MAXIMUM at the Wisoncsin Synchrotron Radiation Center, which uses radiation from a 30-period undulator. The article includes a discussion of the first tests after the initial commissioning. (orig.).
Maximum-likelihood method in quantum estimation
Paris, M G A; Sacchi, M F
2001-01-01
The maximum-likelihood method for quantum estimation is reviewed and applied to the reconstruction of density matrix of spin and radiation as well as to the determination of several parameters of interest in quantum optics.
The maximum entropy technique. System's statistical description
Belashev, B Z
2002-01-01
The maximum entropy technique (MENT) is applied for searching the distribution functions of physical values. MENT takes into consideration the demand of maximum entropy, the characteristics of the system and the connection conditions, naturally. It is allowed to apply MENT for statistical description of closed and open systems. The examples in which MENT had been used for the description of the equilibrium and nonequilibrium states and the states far from the thermodynamical equilibrium are considered
19 CFR 114.23 - Maximum period.
2010-04-01
... 19 Customs Duties 1 2010-04-01 2010-04-01 false Maximum period. 114.23 Section 114.23 Customs... CARNETS Processing of Carnets § 114.23 Maximum period. (a) A.T.A. carnet. No A.T.A. carnet with a period of validity exceeding 1 year from date of issue shall be accepted. This period of validity cannot be...
Maximum-Likelihood Detection Of Noncoherent CPM
Divsalar, Dariush; Simon, Marvin K.
1993-01-01
Simplified detectors proposed for use in maximum-likelihood-sequence detection of symbols in alphabet of size M transmitted by uncoded, full-response continuous phase modulation over radio channel with additive white Gaussian noise. Structures of receivers derived from particular interpretation of maximum-likelihood metrics. Receivers include front ends, structures of which depends only on M, analogous to those in receivers of coherent CPM. Parts of receivers following front ends have structures, complexity of which would depend on N.
Least cost cusp concentrator design
Nanda, S.K.; Mullick, S.C.; Annamalai, M.; Iyer, M.V.; Nirmala, K.A.; Venkatesh, P.; Prasad, C.R.; Subramani, C.
1982-01-01
Cusp concentrators require larger reflector areas, but can be designed for larger acceptance angles, allowing large mirror tolerances. Design procedures are outlined to compute the optimum combination of acceptance angle and maximum mirror slope for any required concentration ratio, taking into account the material as well as fabrication costs. The cusps are compared with the parabola.
SEXUAL DIMORPHISM OF MAXIMUM FEMORAL LENGTH
Pandya A M
2011-04-01
Full Text Available Sexual identification from the skeletal parts has medico legal and anthropological importance. Present study aims to obtain values of maximum femoral length and to evaluate its possible usefulness in determining correct sexual identification. Study sample consisted of 184 dry, normal, adult, human femora (136 male & 48 female from skeletal collections of Anatomy department, M. P. Shah Medical College, Jamnagar, Gujarat. Maximum length of femur was considered as maximum vertical distance between upper end of head of femur and the lowest point on femoral condyle, measured with the osteometric board. Mean Values obtained were, 451.81 and 417.48 for right male and female, and 453.35 and 420.44 for left male and female respectively. Higher value in male was statistically highly significant (P< 0.001 on both sides. Demarking point (D.P. analysis of the data showed that right femora with maximum length more than 476.70 were definitely male and less than 379.99 were definitely female; while for left bones, femora with maximum length more than 484.49 were definitely male and less than 385.73 were definitely female. Maximum length identified 13.43% of right male femora, 4.35% of right female femora, 7.25% of left male femora and 8% of left female femora. [National J of Med Res 2011; 1(2.000: 67-70
Ethical issues occurring within nursing education.
Fowler, Marsha D; Davis, Anne J
2013-03-01
The large body of literature labeled "ethics in nursing education" is entirely devoted to curricular matters of ethics education in nursing schools, that is, to what ought to be the ethics content that is taught and what theory or issues ought to be included in all nursing curricula. Where the nursing literature actually focuses on particular ethical issues, it addresses only single topics. Absent from the literature, however, is any systematic analysis and explication of ethical issues or dilemmas that occur within the context of nursing education. The objective of this article is to identify the spectrum of ethical issues in nursing education to the end of prompting a systematic and thorough study of such issues, and to lay the groundwork for research by identifying and provisionally typologizing the ethical issues that occur within the context of academic nursing.
Molten Metal Explosions are Still Occurring
2009-02-01
pans which can give rise to Force 2 incidents if unheated or contain foreign matter. Handling hot dross represents a particular hazard. Force 3...explosions have occurred from hot dross transfer, cooling and dumping into storage areas. In one recent incident, an employee reportedly dumped a load of...thermiting dross into a water puddle and was fatally burned. Casting: Incidents continue to be reported for dc casting arising from bleed-outs
STUDY ON MAXIMUM SPECIFIC SLUDGE ACIVITY OF DIFFERENT ANAEROBIC GRANULAR SLUDGE BY BATCH TESTS
无
2001-01-01
The maximum specific sludge activity of granular sludge from large-scale UASB, IC and Biobed anaerobic reactors were investigated by batch tests. The limitation factors related to maximum specific sludge activity (diffusion, substrate sort, substrate concentration and granular size) were studied. The general principle and procedure for the precise measurement of maximum specific sludge activity were suggested. The potential capacity of loading rate of the IC and Biobed anaerobic reactors were analyzed and compared by use of the batch tests results.
Naturally occurring radionuclides and Earth sciences
G. Ferrara
1997-06-01
Full Text Available Naturally occurring radionuclides are used in Earth sciences for two fundamental purposes: age determination of rocks and minerals and studies of variation of the isotopic composition of radiogenic nuclides. The methodologies that are in use today allow us to determine ages spanning from the Earth's age to the late Quaternary. The variations of isotopic composition of radiogenic nuclides can be applied to problems of mantle evolution, magma genesis and characterization with respect to different geodynamic situations and can provide valuable information not obtainable by elemental geochemistry.
The maximum rotation of a galactic disc
Bottema, R
1997-01-01
The observed stellar velocity dispersions of galactic discs show that the maximum rotation of a disc is on average 63% of the observed maximum rotation. This criterion can, however, not be applied to small or low surface brightness (LSB) galaxies because such systems show, in general, a continuously rising rotation curve until the outermost measured radial position. That is why a general relation has been derived, giving the maximum rotation for a disc depending on the luminosity, surface brightness, and colour of the disc. As a physical basis of this relation serves an adopted fixed mass-to-light ratio as a function of colour. That functionality is consistent with results from population synthesis models and its absolute value is determined from the observed stellar velocity dispersions. The derived maximum disc rotation is compared with a number of observed maximum rotations, clearly demonstrating the need for appreciable amounts of dark matter in the disc region and even more so for LSB galaxies. Matters h...
Maximum permissible voltage of YBCO coated conductors
Wen, J.; Lin, B.; Sheng, J.; Xu, J.; Jin, Z.; Hong, Z.; Wang, D.; Zhou, H.; Shen, X.; Shen, C.
2014-06-01
Superconducting fault current limiter (SFCL) could reduce short circuit currents in electrical power system. One of the most important thing in developing SFCL is to find out the maximum permissible voltage of each limiting element. The maximum permissible voltage is defined as the maximum voltage per unit length at which the YBCO coated conductors (CC) do not suffer from critical current (Ic) degradation or burnout. In this research, the time of quenching process is changed and voltage is raised until the Ic degradation or burnout happens. YBCO coated conductors test in the experiment are from American superconductor (AMSC) and Shanghai Jiao Tong University (SJTU). Along with the quenching duration increasing, the maximum permissible voltage of CC decreases. When quenching duration is 100 ms, the maximum permissible of SJTU CC, 12 mm AMSC CC and 4 mm AMSC CC are 0.72 V/cm, 0.52 V/cm and 1.2 V/cm respectively. Based on the results of samples, the whole length of CCs used in the design of a SFCL can be determined.
Computing Rooted and Unrooted Maximum Consistent Supertrees
van Iersel, Leo
2009-01-01
A chief problem in phylogenetics and database theory is the computation of a maximum consistent tree from a set of rooted or unrooted trees. A standard input are triplets, rooted binary trees on three leaves, or quartets, unrooted binary trees on four leaves. We give exact algorithms constructing rooted and unrooted maximum consistent supertrees in time O(2^n n^5 m^2 log(m)) for a set of m triplets (quartets), each one distinctly leaf-labeled by some subset of n labels. The algorithms extend to weighted triplets (quartets). We further present fast exact algorithms for constructing rooted and unrooted maximum consistent trees in polynomial space. Finally, for a set T of m rooted or unrooted trees with maximum degree D and distinctly leaf-labeled by some subset of a set L of n labels, we compute, in O(2^{mD} n^m m^5 n^6 log(m)) time, a tree distinctly leaf-labeled by a maximum-size subset X of L that all trees in T, when restricted to X, are consistent with.
Maximum magnitude earthquakes induced by fluid injection
McGarr, Arthur F.
2014-01-01
Analysis of numerous case histories of earthquake sequences induced by fluid injection at depth reveals that the maximum magnitude appears to be limited according to the total volume of fluid injected. Similarly, the maximum seismic moment seems to have an upper bound proportional to the total volume of injected fluid. Activities involving fluid injection include (1) hydraulic fracturing of shale formations or coal seams to extract gas and oil, (2) disposal of wastewater from these gas and oil activities by injection into deep aquifers, and (3) the development of enhanced geothermal systems by injecting water into hot, low-permeability rock. Of these three operations, wastewater disposal is observed to be associated with the largest earthquakes, with maximum magnitudes sometimes exceeding 5. To estimate the maximum earthquake that could be induced by a given fluid injection project, the rock mass is assumed to be fully saturated, brittle, to respond to injection with a sequence of earthquakes localized to the region weakened by the pore pressure increase of the injection operation and to have a Gutenberg-Richter magnitude distribution with a b value of 1. If these assumptions correctly describe the circumstances of the largest earthquake, then the maximum seismic moment is limited to the volume of injected liquid times the modulus of rigidity. Observations from the available case histories of earthquakes induced by fluid injection are consistent with this bound on seismic moment. In view of the uncertainties in this analysis, however, this should not be regarded as an absolute physical limit.
Maximum magnitude earthquakes induced by fluid injection
McGarr, A.
2014-02-01
Analysis of numerous case histories of earthquake sequences induced by fluid injection at depth reveals that the maximum magnitude appears to be limited according to the total volume of fluid injected. Similarly, the maximum seismic moment seems to have an upper bound proportional to the total volume of injected fluid. Activities involving fluid injection include (1) hydraulic fracturing of shale formations or coal seams to extract gas and oil, (2) disposal of wastewater from these gas and oil activities by injection into deep aquifers, and (3) the development of enhanced geothermal systems by injecting water into hot, low-permeability rock. Of these three operations, wastewater disposal is observed to be associated with the largest earthquakes, with maximum magnitudes sometimes exceeding 5. To estimate the maximum earthquake that could be induced by a given fluid injection project, the rock mass is assumed to be fully saturated, brittle, to respond to injection with a sequence of earthquakes localized to the region weakened by the pore pressure increase of the injection operation and to have a Gutenberg-Richter magnitude distribution with a b value of 1. If these assumptions correctly describe the circumstances of the largest earthquake, then the maximum seismic moment is limited to the volume of injected liquid times the modulus of rigidity. Observations from the available case histories of earthquakes induced by fluid injection are consistent with this bound on seismic moment. In view of the uncertainties in this analysis, however, this should not be regarded as an absolute physical limit.
30 CFR 7.87 - Test to determine the maximum fuel-air ratio.
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Test to determine the maximum fuel-air ratio. 7... Use in Underground Coal Mines § 7.87 Test to determine the maximum fuel-air ratio. (a) Test procedure... several speed/torque conditions to determine the concentrations of CO and NOX, dry basis, in the...
A network of cancer genes with co-occurring and anti-co-occurring mutations.
Qinghua Cui
Full Text Available Certain cancer genes contribute to tumorigenesis in a manner of either co-occurring or mutually exclusive (anti-co-occurring mutations; however, the global picture of when, where and how these functional interactions occur remains unclear. This study presents a systems biology approach for this purpose. After applying this method to cancer gene mutation data generated from large-scale and whole genome sequencing of cancer samples, a network of cancer genes with co-occurring and anti-co-occurring mutations was constructed. Analysis of this network revealed that genes with co-occurring mutations prefer direct signaling transductions and that the interaction relations among cancer genes in the network are related with their functional similarity. It was also revealed that genes with co-occurring mutations tend to have similar mutation frequencies, whereas genes with anti-co-occurring mutations tend to have different mutation frequencies. Moreover, genes with more exons tend to have more co-occurring mutations with other genes, and genes having lower local coherent network structures tend to have higher mutation frequency. The network showed two complementary modules that have distinct functions and have different roles in tumorigenesis. This study presented a framework for the analysis of cancer genome sequencing outputs. The presented data and uncovered patterns are helpful for understanding the contribution of gene mutations to tumorigenesis and valuable in the identification of key biomarkers and drug targets for cancer.
Maximum Multiflow in Wireless Network Coding
Zhou, Jin-Yi; Jiang, Yong; Zheng, Hai-Tao
2012-01-01
In a multihop wireless network, wireless interference is crucial to the maximum multiflow (MMF) problem, which studies the maximum throughput between multiple pairs of sources and sinks. In this paper, we observe that network coding could help to decrease the impacts of wireless interference, and propose a framework to study the MMF problem for multihop wireless networks with network coding. Firstly, a network model is set up to describe the new conflict relations modified by network coding. Then, we formulate a linear programming problem to compute the maximum throughput and show its superiority over one in networks without coding. Finally, the MMF problem in wireless network coding is shown to be NP-hard and a polynomial approximation algorithm is proposed.
Optimal Control of Polymer Flooding Based on Maximum Principle
Yang Lei
2012-01-01
Full Text Available Polymer flooding is one of the most important technologies for enhanced oil recovery (EOR. In this paper, an optimal control model of distributed parameter systems (DPSs for polymer injection strategies is established, which involves the performance index as maximum of the profit, the governing equations as the fluid flow equations of polymer flooding, and the inequality constraint as the polymer concentration limitation. To cope with the optimal control problem (OCP of this DPS, the necessary conditions for optimality are obtained through application of the calculus of variations and Pontryagin’s weak maximum principle. A gradient method is proposed for the computation of optimal injection strategies. The numerical results of an example illustrate the effectiveness of the proposed method.
Stratakou, I.; Fels-Klerx, van der H.J.
2010-01-01
In 2006, the European Commission has established maximum levels for ochratoxin A in wine and grape products, using occurrence data up to 2001 and toxicity data up to 2006. This paper presents an up-to-date overview of the occurrence of mycotoxins in grapes and wine produced in Europe in the period 1
The Wiener maximum quadratic assignment problem
Cela, Eranda; Woeginger, Gerhard J
2011-01-01
We investigate a special case of the maximum quadratic assignment problem where one matrix is a product matrix and the other matrix is the distance matrix of a one-dimensional point set. We show that this special case, which we call the Wiener maximum quadratic assignment problem, is NP-hard in the ordinary sense and solvable in pseudo-polynomial time. Our approach also yields a polynomial time solution for the following problem from chemical graph theory: Find a tree that maximizes the Wiener index among all trees with a prescribed degree sequence. This settles an open problem from the literature.
Maximum confidence measurements via probabilistic quantum cloning
Zhang Wen-Hai; Yu Long-Bao; Cao Zhuo-Liang; Ye Liu
2013-01-01
Probabilistic quantum cloning (PQC) cannot copy a set of linearly dependent quantum states.In this paper,we show that if incorrect copies are allowed to be produced,linearly dependent quantum states may also be cloned by the PQC.By exploiting this kind of PQC to clone a special set of three linearly dependent quantum states,we derive the upper bound of the maximum confidence measure of a set.An explicit transformation of the maximum confidence measure is presented.
Revealing the Maximum Strength in Nanotwinned Copper
Lu, L.; Chen, X.; Huang, Xiaoxu
2009-01-01
The strength of polycrystalline materials increases with decreasing grain size. Below a critical size, smaller grains might lead to softening, as suggested by atomistic simulations. The strongest size should arise at a transition in deformation mechanism from lattice dislocation activities to grain...... boundary–related processes. We investigated the maximum strength of nanotwinned copper samples with different twin thicknesses. We found that the strength increases with decreasing twin thickness, reaching a maximum at 15 nanometers, followed by a softening at smaller values that is accompanied by enhanced...
The Maximum Resource Bin Packing Problem
Boyar, J.; Epstein, L.; Favrholdt, L.M.
2006-01-01
Usually, for bin packing problems, we try to minimize the number of bins used or in the case of the dual bin packing problem, maximize the number or total size of accepted items. This paper presents results for the opposite problems, where we would like to maximize the number of bins used...... algorithms, First-Fit-Increasing and First-Fit-Decreasing for the maximum resource variant of classical bin packing. For the on-line variant, we define maximum resource variants of classical and dual bin packing. For dual bin packing, no on-line algorithm is competitive. For classical bin packing, we find...
Maximum entropy analysis of EGRET data
Pohl, M.; Strong, A.W.
1997-01-01
EGRET data are usually analysed on the basis of the Maximum-Likelihood method \\cite{ma96} in a search for point sources in excess to a model for the background radiation (e.g. \\cite{hu97}). This method depends strongly on the quality of the background model, and thus may have high systematic unce...... uncertainties in region of strong and uncertain background like the Galactic Center region. Here we show images of such regions obtained by the quantified Maximum-Entropy method. We also discuss a possible further use of MEM in the analysis of problematic regions of the sky....
Revealing the Maximum Strength in Nanotwinned Copper
Lu, L.; Chen, X.; Huang, Xiaoxu
2009-01-01
The strength of polycrystalline materials increases with decreasing grain size. Below a critical size, smaller grains might lead to softening, as suggested by atomistic simulations. The strongest size should arise at a transition in deformation mechanism from lattice dislocation activities to grain...... boundary–related processes. We investigated the maximum strength of nanotwinned copper samples with different twin thicknesses. We found that the strength increases with decreasing twin thickness, reaching a maximum at 15 nanometers, followed by a softening at smaller values that is accompanied by enhanced...
Tetrahydroberberine, a pharmacologically active naturally occurring alkaloid.
Pingali, Subramanya; Donahue, James P; Payton-Stewart, Florastina
2015-04-01
Tetrahydroberberine (systematic name: 9,10-dimethoxy-5,8,13,13a-tetrahydro-6H-benzo[g][1,3]benzodioxolo[5,6-a]quinolizine), C20H21NO4, a widely distributed naturally occurring alkaloid, has been crystallized as a racemic mixture about an inversion center. A bent conformation of the molecule is observed, with an angle of 24.72 (5)° between the arene rings at the two ends of the reduced quinolizinium core. The intermolecular hydrogen bonds that play an apparent role in crystal packing are 1,3-benzodioxole -CH2···OCH3 and -OCH3···OCH3 interactions between neighboring molecules.
Pilomyxoid Astrocytoma Occurring in the Third Ventricle
Sanghyeon Kim
2015-01-01
Full Text Available Pilomyxoid astrocytoma (PMA is a rare central nervous system tumor that has been included in the 2007 World Health Organization Classification of Tumors of the Central Nervous System. Due to its more aggressive behavior, PMA is classified as Grade II neoplasm by the World Health Organization. PMA predominantly affects the hypothalamic/chiasmatic region and occurs in children (mean age of occurrence = 10 months. We report a case of a 24-year-old man who presented with headache, nausea, and vomiting. Brain CT and MRI revealed a mass occupying only the third ventricle. We performed partial resection. Histological findings, including monophasic growth with a myxoid background, and absence of Rosenthal fibers or eosinophilic granular bodies, as well as the strong positivity for glial fibrillary acidic protein were consistent with PMA.
Detection of Harmonic Occurring using Kalman Filtering
Hussain, Dil Muhammad Akbar; Shoro, Ghulam Mustafa; Imran, Raja Muhammed
2014-01-01
As long as the load to a power system is linear which has been the case before 80's, typically no harmonics are produced. However, the modern power electronic equipment for controlled power consumption produces harmonic disturbances, these devices/equipment possess nonlinear voltage/current chara...... using Kalman filter. This may be very useful for example to quickly switching on certain filters based on the harmonic present. We are using a unique technique to detect the occurrence of harmonics......./current characteristic. These harmonics are not to be allowed to grow beyond a certain limit to avoid any grave consequence to the customer’s main supply. Filters can be implemented at the power source or utility location to eliminate these harmonics. In this paper we detect the instance at which these harmonics occur...
Autoionization of water: does it really occur?
Artemov, V G; Sysoev, N N; Volkov, A A
2015-01-01
The ionization constant of water Kw is currently determined on the proton conductivity sigma1 which is measured at frequencies lower than 10^7 Hz. Here, we develop the idea that the high frequency conductivity sigma2 (~10^11 Hz), rather than sigma1 represents a net proton dynamics in water, to evaluate the actual concentration c of H3O+ and OH- ions from sigma2. We find c to be not dependent on temperature to conclude that i) water electrodynamics is due to a proton exchange between H3O+ (or OH-) ions and neutral H2O molecules rather than spontaneous ionization of H2O molecules, ii) the common Kw (or pH) reflects the thermoactivation of the H3O+ and OH- ions from the potential of their interaction, iii) the lifetime of a target water molecule does not exceed parts of nanosecond.
Chapman, Melinda J.; Cravotta, Charles A.; Szabo, Zoltan; Lindsay, Bruce D.
2013-01-01
Groundwater quality and aquifer lithologies in the Piedmont and Blue Ridge Physiographic Provinces in the eastern United States vary widely as a result of complex geologic history. Bedrock composition (mineralogy) and geochemical conditions in the aquifer directly affect the occurrence (presence in rock and groundwater) and distribution (concentration and mobility) of potential naturally occurring contaminants, such as arsenic and radionuclides, in drinking water. To evaluate potential relations between aquifer lithology and the spatial distribution of naturally occurring contaminants, the crystalline-rock aquifers of the Piedmont and Blue Ridge Physiographic Provinces and the siliciclastic-rock aquifers of the Early Mesozoic basin of the Piedmont Physiographic Province were divided into 14 lithologic groups, each having from 1 to 16 lithochemical subgroups, based on primary rock type, mineralogy, and weathering potential. Groundwater-quality data collected by the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) Program from 1994 through 2008 from 346 wells and springs in various hydrogeologic and land-use settings from Georgia through New Jersey were compiled and analyzed for this study. Analyses for most constituents were for filtered samples, and, thus, the compiled data consist largely of dissolved concentrations. Concentrations were compared to criteria for protection of human health, such as U.S. Environmental Protection Agency (USEPA) drinking water maximum contaminant levels and secondary maximum contaminant levels or health-based screening levels developed by the USGS NAWQA Program in cooperation with the USEPA, the New Jersey Department of Environmental Protection, and Oregon Health & Science University. Correlations among constituent concentrations, pH, and oxidation-reduction (redox) conditions were used to infer geochemical controls on constituent mobility within the aquifers. Of the 23 trace-element constituents evaluated
Analysis of Photovoltaic Maximum Power Point Trackers
Veerachary, Mummadi
The photovoltaic generator exhibits a non-linear i-v characteristic and its maximum power point (MPP) varies with solar insolation. An intermediate switch-mode dc-dc converter is required to extract maximum power from the photovoltaic array. In this paper buck, boost and buck-boost topologies are considered and a detailed mathematical analysis, both for continuous and discontinuous inductor current operation, is given for MPP operation. The conditions on the connected load values and duty ratio are derived for achieving the satisfactory maximum power point operation. Further, it is shown that certain load values, falling out of the optimal range, will drive the operating point away from the true maximum power point. Detailed comparison of various topologies for MPPT is given. Selection of the converter topology for a given loading is discussed. Detailed discussion on circuit-oriented model development is given and then MPPT effectiveness of various converter systems is verified through simulations. Proposed theory and analysis is validated through experimental investigations.
On maximum cycle packings in polyhedral graphs
Peter Recht
2014-04-01
Full Text Available This paper addresses upper and lower bounds for the cardinality of a maximum vertex-/edge-disjoint cycle packing in a polyhedral graph G. Bounds on the cardinality of such packings are provided, that depend on the size, the order or the number of faces of G, respectively. Polyhedral graphs are constructed, that attain these bounds.
Hard graphs for the maximum clique problem
Hoede, Cornelis
1988-01-01
The maximum clique problem is one of the NP-complete problems. There are graphs for which a reduction technique exists that transforms the problem for these graphs into one for graphs with specific properties in polynomial time. The resulting graphs do not grow exponentially in order and number. Gra
Maximum Likelihood Estimation of Search Costs
J.L. Moraga-Gonzalez (José Luis); M.R. Wildenbeest (Matthijs)
2006-01-01
textabstractIn a recent paper Hong and Shum (forthcoming) present a structural methodology to estimate search cost distributions. We extend their approach to the case of oligopoly and present a maximum likelihood estimate of the search cost distribution. We apply our method to a data set of online p
Weak Scale From the Maximum Entropy Principle
Hamada, Yuta; Kawana, Kiyoharu
2015-01-01
The theory of multiverse and wormholes suggests that the parameters of the Standard Model are fixed in such a way that the radiation of the $S^{3}$ universe at the final stage $S_{rad}$ becomes maximum, which we call the maximum entropy principle. Although it is difficult to confirm this principle generally, for a few parameters of the Standard Model, we can check whether $S_{rad}$ actually becomes maximum at the observed values. In this paper, we regard $S_{rad}$ at the final stage as a function of the weak scale ( the Higgs expectation value ) $v_{h}$, and show that it becomes maximum around $v_{h}={\\cal{O}}(300\\text{GeV})$ when the dimensionless couplings in the Standard Model, that is, the Higgs self coupling, the gauge couplings, and the Yukawa couplings are fixed. Roughly speaking, we find that the weak scale is given by \\begin{equation} v_{h}\\sim\\frac{T_{BBN}^{2}}{M_{pl}y_{e}^{5}},\
Weak scale from the maximum entropy principle
Hamada, Yuta; Kawai, Hikaru; Kawana, Kiyoharu
2015-03-01
The theory of the multiverse and wormholes suggests that the parameters of the Standard Model (SM) are fixed in such a way that the radiation of the S3 universe at the final stage S_rad becomes maximum, which we call the maximum entropy principle. Although it is difficult to confirm this principle generally, for a few parameters of the SM, we can check whether S_rad actually becomes maximum at the observed values. In this paper, we regard S_rad at the final stage as a function of the weak scale (the Higgs expectation value) vh, and show that it becomes maximum around vh = {{O}} (300 GeV) when the dimensionless couplings in the SM, i.e., the Higgs self-coupling, the gauge couplings, and the Yukawa couplings are fixed. Roughly speaking, we find that the weak scale is given by vh ˜ T_{BBN}2 / (M_{pl}ye5), where ye is the Yukawa coupling of electron, T_BBN is the temperature at which the Big Bang nucleosynthesis starts, and M_pl is the Planck mass.
Global characterization of the Holocene Thermal Maximum
Renssen, H.; Seppä, H.; Crosta, X.; Goosse, H.; Roche, D.M.V.A.P.
2012-01-01
We analyze the global variations in the timing and magnitude of the Holocene Thermal Maximum (HTM) and their dependence on various forcings in transient simulations covering the last 9000 years (9 ka), performed with a global atmosphere-ocean-vegetation model. In these experiments, we consider the i
Instance Optimality of the Adaptive Maximum Strategy
L. Diening; C. Kreuzer; R. Stevenson
2016-01-01
In this paper, we prove that the standard adaptive finite element method with a (modified) maximum marking strategy is instance optimal for the total error, being the square root of the squared energy error plus the squared oscillation. This result will be derived in the model setting of Poisson’s e
Maximum phonation time: variability and reliability.
Speyer, Renée; Bogaardt, Hans C A; Passos, Valéria Lima; Roodenburg, Nel P H D; Zumach, Anne; Heijnen, Mariëlle A M; Baijens, Laura W J; Fleskens, Stijn J H M; Brunings, Jan W
2010-05-01
The objective of the study was to determine maximum phonation time reliability as a function of the number of trials, days, and raters in dysphonic and control subjects. Two groups of adult subjects participated in this reliability study: a group of outpatients with functional or organic dysphonia versus a group of healthy control subjects matched by age and gender. Over a period of maximally 6 weeks, three video recordings were made of five subjects' maximum phonation time trials. A panel of five experts were responsible for all measurements, including a repeated measurement of the subjects' first recordings. Patients showed significantly shorter maximum phonation times compared with healthy controls (on average, 6.6 seconds shorter). The averaged interclass correlation coefficient (ICC) over all raters per trial for the first day was 0.998. The averaged reliability coefficient per rater and per trial for repeated measurements of the first day's data was 0.997, indicating high intrarater reliability. The mean reliability coefficient per day for one trial was 0.939. When using five trials, the reliability increased to 0.987. The reliability over five trials for a single day was 0.836; for 2 days, 0.911; and for 3 days, 0.935. To conclude, the maximum phonation time has proven to be a highly reliable measure in voice assessment. A single rater is sufficient to provide highly reliable measurements.
Maximum Phonation Time: Variability and Reliability
R. Speyer; H.C.A. Bogaardt; V.L. Passos; N.P.H.D. Roodenburg; A. Zumach; M.A.M. Heijnen; L.W.J. Baijens; S.J.H.M. Fleskens; J.W. Brunings
2010-01-01
The objective of the study was to determine maximum phonation time reliability as a function of the number of trials, days, and raters in dysphonic and control subjects. Two groups of adult subjects participated in this reliability study: a group of outpatients with functional or organic dysphonia v
Maximum likelihood estimation of fractionally cointegrated systems
Lasak, Katarzyna
In this paper we consider a fractionally cointegrated error correction model and investigate asymptotic properties of the maximum likelihood (ML) estimators of the matrix of the cointe- gration relations, the degree of fractional cointegration, the matrix of the speed of adjustment...
Maximum likelihood estimation for integrated diffusion processes
Baltazar-Larios, Fernando; Sørensen, Michael
EM-algorithm to obtain maximum likelihood estimates of the parameters in the diffusion model. As part of the algorithm, we use a recent simple method for approximate simulation of diffusion bridges. In simulation studies for the Ornstein-Uhlenbeck process and the CIR process the proposed method works...
Maximum gain of Yagi-Uda arrays
Bojsen, J.H.; Schjær-Jacobsen, Hans; Nilsson, E.
1971-01-01
Numerical optimisation techniques have been used to find the maximum gain of some specific parasitic arrays. The gain of an array of infinitely thin, equispaced dipoles loaded with arbitrary reactances has been optimised. The results show that standard travelling-wave design methods are not optimum....... Yagi–Uda arrays with equal and unequal spacing have also been optimised with experimental verification....
NICOLETA DANIELA GORON
2012-12-01
Full Text Available The Influence of climatic factors upon the flash-floods occuring in the superior basin of the river Mureş . The floods triggering factors in the upper river basin of the Mures are likely climatic in which case the analysis is based upon a string of data representative for the period 1986-2010, for eight stations and making reference to average rainfall,maximum rainfall within 24 hours, the thickness and duration of snow.The floods in the upper basin of the Mureş do not cause major damage, except in exceptional cases. Most localities that have reported damage caused by floods are located near the Topliţa-Deda gorge, an area that influences flow concentration through a relatively narrow territory compared to the upstream territory where the Mureş river gathers its tributaries.
Herrmann, Richard A.
1974-01-01
By concentrating radioactivity contained on luminous dials, a teacher can make a high reading source for classroom experiments on radiation. The preparation of the source and its uses are described. (DT)
Determination of optimum sunlight concentration level in space for 3-4 cascade solar cells
Curtis, H. B.
1982-01-01
The optimum range of concentration in space for III-V cascade cells has been calculated using a realistic solar cell diode equation. Temperature was varied with concentration using several models and ranged from 55 deg at one sun to between 80 deg and 200 deg C at 100 suns. A variety of series resistance and internal resistances were used. Coefficients of the diffusion and recombination terms are strongly temperature dependent. The study indicates that the maximum efficiency of 30 percent occurs in the 50 to 100 X sun concentration range provided series resistance is below 0.015 ohm sq cm and cell temperature is about 80 C at 100 suns.
Determination of optimum sunlight concentration level in space for 3-5 cascade solar cells
Curtis, H. B.
1982-01-01
The optimum range of concentration levels in space for III-V cascade cells was calculated using a realistic solar cell diode equation. Temperature was varied with concentration using several models and ranged from 55 C at 1 sun to between 80 and 200 C at 100 suns. A variety of series resistance and internal resistances were used. Coefficients of the diffusion and recombination terms are strongly temperature dependent. The study indicates that the maximum efficiency of 30 percent occurs in the 50 to 100 sun concentration range provided series resistance is below 0.015 ohm-sq cm and cell temperature is about 80 C at 100 suns.
M.A.G. Silva
2009-10-01
Full Text Available Estudaram-se as alterações nos eletrólitos, nos gases sanguíneos, na osmolalidade, no hematócrito, na hemoglobina, nas bases tituláveis e no anion gap no sangue venoso de 11 equinos da raça Puro Sangue Árabe, destreinados, submetidos a exercício máximo e submáximo em esteira rolante. Esses animais passaram por período de três dias de adaptação à esteira rolante e posteriormente realizaram dois exercícios testes, um de curta e outro de longa duração. Foram coletadas amostras de sangue venoso antes, imediatamente após e 30 minutos após o término dos exercícios. Após a realização do exercício máximo, observou-se diminuição significativa no pHv, na PvCO2, no HCO3, na cBase além de elevação no AG. Detectou-se também aumento do K+, do Ht e da Hb. Ao final do exercício submáximo, constatou-se somente aumento significativo no pHv, na cBase, na SatvO2 e na PvO2. Conclui-se que os equinos submetidos a exercício máximo desenvolveram acidose metabólica e alcalose respiratória compensatória, hipercalemia e aumento nos valores de hematócrito e hemoglobina. No exercício submáximo, os animais apresentaram alcalose metabólica hipoclorêmica e não ocorreram alterações no equilíbrio hidroeletrolítico.Changes in electrolytes, blood gas, osmolality, hematocrit, hemoglobin, base concentration, and anion gap in 11 detrained Arabian horses during exercise on a high-speed treadmill were investigated. After a period of three days of adaptation on the rolling mat, the animals were submitted to two exercises: one of short (maximum and other of long duration (submaximum. Venous blood samples were obtained right before, and 30 minutes after the exercise. After the maximum exercise, it was observed a significative decrease in pHv, PvCO2, HCO3, and cBase and an increase in AG. It was also observed hypercalemia and increase in Ht and Hb. At the final of the submaximum exercise, it was observed significative increase in pH, c
Naturally occurring toxic substances in foods.
Gross, R L; Newberne, P M
1977-11-01
Numerous chemical toxins, including normal components of natural foods, e.g., mycotoxins, and toxic chemicals as contaminants such as pesticides, fertilizers, food additives, and preservatives, which are potentially toxic to humans, are discussed. Potential toxicity, the hazard to man represented by most of these chemicals, may be low because the concentration in food may be low. The gap in our knowledge of long-term effects makes rational decisions as to allowable levels of these substances a major problem. On the other hand, nitrosamines and aflatoxins are toxins for which there exists a voluminous literature documentaing extreme biologic activity in experimental animals and indirect evidence for activity in man. Epidemiologic evidence has linked them to human cancers, and because of increasing evidence of long-term human exposure to these toxins either as inadvertent contaminants during food preparation or as the metabolites of mycotic infestation this possible hazard demands intensive investigation. An exhaustive review of data from epidemiologic surveys in various parts of the world, as well as from long-term laboratory studies, represents an impressive start in this direction.
Maximum Time Separation of Events in Cyclic Systems with Linear and Latest Timing Constraints
Jin, Fen; Hulgaard, Henrik; Cerny, Eduard
1998-01-01
The determination of the maximum time separations of events is important in the design, synthesis, and verification of digital systems, especially in interface timing verification. Many researchers have explored solutions to the problem with various restrictions: a) on the type of constraints......, and b) on whether the events in the specification are allowed to occur repeatedly. When the events can occur only once, the problem is well solved. There are fewer concrete results for systems where the events can occur repeatedly. We extend the work by Hulgaard et al.\\ for computing the maximum...
Messier, Kyle P; Campbell, Ted; Bradley, Philip J; Serre, Marc L
2015-08-18
Radon ((222)Rn) is a naturally occurring chemically inert, colorless, and odorless radioactive gas produced from the decay of uranium ((238)U), which is ubiquitous in rocks and soils worldwide. Exposure to (222)Rn is likely the second leading cause of lung cancer after cigarette smoking via inhalation; however, exposure through untreated groundwater is also a contributing factor to both inhalation and ingestion routes. A land use regression (LUR) model for groundwater (222)Rn with anisotropic geological and (238)U based explanatory variables is developed, which helps elucidate the factors contributing to elevated (222)Rn across North Carolina. The LUR is also integrated into the Bayesian Maximum Entropy (BME) geostatistical framework to increase accuracy and produce a point-level LUR-BME model of groundwater (222)Rn across North Carolina including prediction uncertainty. The LUR-BME model of groundwater (222)Rn results in a leave-one out cross-validation r(2) of 0.46 (Pearson correlation coefficient = 0.68), effectively predicting within the spatial covariance range. Modeled results of (222)Rn concentrations show variability among intrusive felsic geological formations likely due to average bedrock (238)U defined on the basis of overlying stream-sediment (238)U concentrations that is a widely distributed consistently analyzed point-source data.
Model Selection Through Sparse Maximum Likelihood Estimation
Banerjee, Onureena; D'Aspremont, Alexandre
2007-01-01
We consider the problem of estimating the parameters of a Gaussian or binary distribution in such a way that the resulting undirected graphical model is sparse. Our approach is to solve a maximum likelihood problem with an added l_1-norm penalty term. The problem as formulated is convex but the memory requirements and complexity of existing interior point methods are prohibitive for problems with more than tens of nodes. We present two new algorithms for solving problems with at least a thousand nodes in the Gaussian case. Our first algorithm uses block coordinate descent, and can be interpreted as recursive l_1-norm penalized regression. Our second algorithm, based on Nesterov's first order method, yields a complexity estimate with a better dependence on problem size than existing interior point methods. Using a log determinant relaxation of the log partition function (Wainwright & Jordan (2006)), we show that these same algorithms can be used to solve an approximate sparse maximum likelihood problem for...
Maximum-entropy description of animal movement.
Fleming, Chris H; Subaşı, Yiğit; Calabrese, Justin M
2015-03-01
We introduce a class of maximum-entropy states that naturally includes within it all of the major continuous-time stochastic processes that have been applied to animal movement, including Brownian motion, Ornstein-Uhlenbeck motion, integrated Ornstein-Uhlenbeck motion, a recently discovered hybrid of the previous models, and a new model that describes central-place foraging. We are also able to predict a further hierarchy of new models that will emerge as data quality improves to better resolve the underlying continuity of animal movement. Finally, we also show that Langevin equations must obey a fluctuation-dissipation theorem to generate processes that fall from this class of maximum-entropy distributions when the constraints are purely kinematic.
Pareto versus lognormal: a maximum entropy test.
Bee, Marco; Riccaboni, Massimo; Schiavo, Stefano
2011-08-01
It is commonly found that distributions that seem to be lognormal over a broad range change to a power-law (Pareto) distribution for the last few percentiles. The distributions of many physical, natural, and social events (earthquake size, species abundance, income and wealth, as well as file, city, and firm sizes) display this structure. We present a test for the occurrence of power-law tails in statistical distributions based on maximum entropy. This methodology allows one to identify the true data-generating processes even in the case when it is neither lognormal nor Pareto. The maximum entropy approach is then compared with other widely used methods and applied to different levels of aggregation of complex systems. Our results provide support for the theory that distributions with lognormal body and Pareto tail can be generated as mixtures of lognormally distributed units.
Maximum Variance Hashing via Column Generation
Lei Luo
2013-01-01
item search. Recently, a number of data-dependent methods have been developed, reflecting the great potential of learning for hashing. Inspired by the classic nonlinear dimensionality reduction algorithm—maximum variance unfolding, we propose a novel unsupervised hashing method, named maximum variance hashing, in this work. The idea is to maximize the total variance of the hash codes while preserving the local structure of the training data. To solve the derived optimization problem, we propose a column generation algorithm, which directly learns the binary-valued hash functions. We then extend it using anchor graphs to reduce the computational cost. Experiments on large-scale image datasets demonstrate that the proposed method outperforms state-of-the-art hashing methods in many cases.
The Maximum Resource Bin Packing Problem
Boyar, J.; Epstein, L.; Favrholdt, L.M.
2006-01-01
algorithms, First-Fit-Increasing and First-Fit-Decreasing for the maximum resource variant of classical bin packing. For the on-line variant, we define maximum resource variants of classical and dual bin packing. For dual bin packing, no on-line algorithm is competitive. For classical bin packing, we find......Usually, for bin packing problems, we try to minimize the number of bins used or in the case of the dual bin packing problem, maximize the number or total size of accepted items. This paper presents results for the opposite problems, where we would like to maximize the number of bins used...... the competitive ratio of various natural algorithms. We study the general versions of the problems as well as the parameterized versions where there is an upper bound of on the item sizes, for some integer k....
Nonparametric Maximum Entropy Estimation on Information Diagrams
Martin, Elliot A; Meinke, Alexander; Děchtěrenko, Filip; Davidsen, Jörn
2016-01-01
Maximum entropy estimation is of broad interest for inferring properties of systems across many different disciplines. In this work, we significantly extend a technique we previously introduced for estimating the maximum entropy of a set of random discrete variables when conditioning on bivariate mutual informations and univariate entropies. Specifically, we show how to apply the concept to continuous random variables and vastly expand the types of information-theoretic quantities one can condition on. This allows us to establish a number of significant advantages of our approach over existing ones. Not only does our method perform favorably in the undersampled regime, where existing methods fail, but it also can be dramatically less computationally expensive as the cardinality of the variables increases. In addition, we propose a nonparametric formulation of connected informations and give an illustrative example showing how this agrees with the existing parametric formulation in cases of interest. We furthe...
Zipf's law, power laws and maximum entropy
Visser, Matt
2013-04-01
Zipf's law, and power laws in general, have attracted and continue to attract considerable attention in a wide variety of disciplines—from astronomy to demographics to software structure to economics to linguistics to zoology, and even warfare. A recent model of random group formation (RGF) attempts a general explanation of such phenomena based on Jaynes' notion of maximum entropy applied to a particular choice of cost function. In the present paper I argue that the specific cost function used in the RGF model is in fact unnecessarily complicated, and that power laws can be obtained in a much simpler way by applying maximum entropy ideas directly to the Shannon entropy subject only to a single constraint: that the average of the logarithm of the observable quantity is specified.
Zipf's law, power laws, and maximum entropy
Visser, Matt
2012-01-01
Zipf's law, and power laws in general, have attracted and continue to attract considerable attention in a wide variety of disciplines - from astronomy to demographics to economics to linguistics to zoology, and even warfare. A recent model of random group formation [RGF] attempts a general explanation of such phenomena based on Jaynes' notion of maximum entropy applied to a particular choice of cost function. In the present article I argue that the cost function used in the RGF model is in fact unnecessarily complicated, and that power laws can be obtained in a much simpler way by applying maximum entropy ideas directly to the Shannon entropy subject only to a single constraint: that the average of the logarithm of the observable quantity is specified.
Regions of constrained maximum likelihood parameter identifiability
Lee, C.-H.; Herget, C. J.
1975-01-01
This paper considers the parameter identification problem of general discrete-time, nonlinear, multiple-input/multiple-output dynamic systems with Gaussian-white distributed measurement errors. Knowledge of the system parameterization is assumed to be known. Regions of constrained maximum likelihood (CML) parameter identifiability are established. A computation procedure employing interval arithmetic is proposed for finding explicit regions of parameter identifiability for the case of linear systems. It is shown that if the vector of true parameters is locally CML identifiable, then with probability one, the vector of true parameters is a unique maximal point of the maximum likelihood function in the region of parameter identifiability and the CML estimation sequence will converge to the true parameters.
A Maximum Radius for Habitable Planets.
Alibert, Yann
2015-09-01
We compute the maximum radius a planet can have in order to fulfill two constraints that are likely necessary conditions for habitability: 1- surface temperature and pressure compatible with the existence of liquid water, and 2- no ice layer at the bottom of a putative global ocean, that would prevent the operation of the geologic carbon cycle to operate. We demonstrate that, above a given radius, these two constraints cannot be met: in the Super-Earth mass range (1-12 Mearth), the overall maximum that a planet can have varies between 1.8 and 2.3 Rearth. This radius is reduced when considering planets with higher Fe/Si ratios, and taking into account irradiation effects on the structure of the gas envelope.
Maximum Profit Configurations of Commercial Engines
Yiran Chen
2011-01-01
An investigation of commercial engines with finite capacity low- and high-price economic subsystems and a generalized commodity transfer law [n ∝ Δ (P m)] in commodity flow processes, in which effects of the price elasticities of supply and demand are introduced, is presented in this paper. Optimal cycle configurations of commercial engines for maximum profit are obtained by applying optimal control theory. In some special cases, the eventual state—market equilibrium—is solely determined by t...
A stochastic maximum principle via Malliavin calculus
Øksendal, Bernt; Zhou, Xun Yu; Meyer-Brandis, Thilo
2008-01-01
This paper considers a controlled It\\^o-L\\'evy process where the information available to the controller is possibly less than the overall information. All the system coefficients and the objective performance functional are allowed to be random, possibly non-Markovian. Malliavin calculus is employed to derive a maximum principle for the optimal control of such a system where the adjoint process is explicitly expressed.
Tissue radiation response with maximum Tsallis entropy.
Sotolongo-Grau, O; Rodríguez-Pérez, D; Antoranz, J C; Sotolongo-Costa, Oscar
2010-10-08
The expression of survival factors for radiation damaged cells is currently based on probabilistic assumptions and experimentally fitted for each tumor, radiation, and conditions. Here, we show how the simplest of these radiobiological models can be derived from the maximum entropy principle of the classical Boltzmann-Gibbs expression. We extend this derivation using the Tsallis entropy and a cutoff hypothesis, motivated by clinical observations. The obtained expression shows a remarkable agreement with the experimental data found in the literature.
Maximum Estrada Index of Bicyclic Graphs
Wang, Long; Wang, Yi
2012-01-01
Let $G$ be a simple graph of order $n$, let $\\lambda_1(G),\\lambda_2(G),...,\\lambda_n(G)$ be the eigenvalues of the adjacency matrix of $G$. The Esrada index of $G$ is defined as $EE(G)=\\sum_{i=1}^{n}e^{\\lambda_i(G)}$. In this paper we determine the unique graph with maximum Estrada index among bicyclic graphs with fixed order.
Maximum privacy without coherence, zero-error
Leung, Debbie; Yu, Nengkun
2016-09-01
We study the possible difference between the quantum and the private capacities of a quantum channel in the zero-error setting. For a family of channels introduced by Leung et al. [Phys. Rev. Lett. 113, 030512 (2014)], we demonstrate an extreme difference: the zero-error quantum capacity is zero, whereas the zero-error private capacity is maximum given the quantum output dimension.
Maximum solid solubility of transition metals in vanadium solvent
ZHANG Jin-long; FANG Shou-shi; ZHOU Zi-qiang; LIN Gen-wen; GE Jian-sheng; FENG Feng
2005-01-01
Maximum solid solubility (Cmax) of different transition metals in metal solvent can be described by a semi-empirical equation using function Zf that contains electronegativity difference, atomic diameter and electron concentration. The relation between Cmax and these parameters of transition metals in vanadium solvent was studied.It is shown that the relation of Cmax and function Zf can be expressed as ln Cmax = Zf = 7. 316 5-2. 780 5 (△X)2 -71. 278δ2 -0. 855 56n2/3. The factor of atomic size parameter has the largest effect on the Cmax of the V binary alloy;followed by the factor of electronegativity difference; the electrons concentration has the smallest effect among the three bond parameters. Function Zf is used for predicting the unknown Cmax of the transition metals in vanadium solvent. The results are compared with Darken-Gurry theorem, which can be deduced by the obtained function Zf in this work.
Boundary condition effects on maximum groundwater withdrawal in coastal aquifers.
Lu, Chunhui; Chen, Yiming; Luo, Jian
2012-01-01
Prevention of sea water intrusion in coastal aquifers subject to groundwater withdrawal requires optimization of well pumping rates to maximize the water supply while avoiding sea water intrusion. Boundary conditions and the aquifer domain size have significant influences on simulating flow and concentration fields and estimating maximum pumping rates. In this study, an analytical solution is derived based on the potential-flow theory for evaluating maximum groundwater pumping rates in a domain with a constant hydraulic head landward boundary. An empirical correction factor, which was introduced by Pool and Carrera (2011) to account for mixing in the case with a constant recharge rate boundary condition, is found also applicable for the case with a constant hydraulic head boundary condition, and therefore greatly improves the usefulness of the sharp-interface analytical solution. Comparing with the solution for a constant recharge rate boundary, we find that a constant hydraulic head boundary often yields larger estimations of the maximum pumping rate and when the domain size is five times greater than the distance between the well and the coastline, the effect of setting different landward boundary conditions becomes insignificant with a relative difference between two solutions less than 2.5%. These findings can serve as a preliminary guidance for conducting numerical simulations and designing tank-scale laboratory experiments for studying groundwater withdrawal problems in coastal aquifers with minimized boundary condition effects.
Information Needs While A Disaster Is Occurring
Perry, S. C.
2010-12-01
that rainfall intensity at their homes might be less than the intensity up in the mountains where the debris flows would start. Nor did they know that debris flows travel too quickly to be outrun. These and many other examples indicate need for social and natural scientists to increase awareness of what to expect when the disaster strikes. This information must be solidly understood before the event occurs - while a disaster is unfolding there are no teachable moments. Case studies indicate that even those who come into a disaster well educated about the phenomenon can struggle to apply what they know when the real situation is at hand. In addition, psychological studies confirm diminished ability to comprehend information at times of stress.
Automatic maximum entropy spectral reconstruction in NMR.
Mobli, Mehdi; Maciejewski, Mark W; Gryk, Michael R; Hoch, Jeffrey C
2007-10-01
Developments in superconducting magnets, cryogenic probes, isotope labeling strategies, and sophisticated pulse sequences together have enabled the application, in principle, of high-resolution NMR spectroscopy to biomolecular systems approaching 1 megadalton. In practice, however, conventional approaches to NMR that utilize the fast Fourier transform, which require data collected at uniform time intervals, result in prohibitively lengthy data collection times in order to achieve the full resolution afforded by high field magnets. A variety of approaches that involve nonuniform sampling have been proposed, each utilizing a non-Fourier method of spectrum analysis. A very general non-Fourier method that is capable of utilizing data collected using any of the proposed nonuniform sampling strategies is maximum entropy reconstruction. A limiting factor in the adoption of maximum entropy reconstruction in NMR has been the need to specify non-intuitive parameters. Here we describe a fully automated system for maximum entropy reconstruction that requires no user-specified parameters. A web-accessible script generator provides the user interface to the system.
Maximum entropy analysis of cosmic ray composition
Nosek, Dalibor; Vícha, Jakub; Trávníček, Petr; Nosková, Jana
2016-01-01
We focus on the primary composition of cosmic rays with the highest energies that cause extensive air showers in the Earth's atmosphere. A way of examining the two lowest order moments of the sample distribution of the depth of shower maximum is presented. The aim is to show that useful information about the composition of the primary beam can be inferred with limited knowledge we have about processes underlying these observations. In order to describe how the moments of the depth of shower maximum depend on the type of primary particles and their energies, we utilize a superposition model. Using the principle of maximum entropy, we are able to determine what trends in the primary composition are consistent with the input data, while relying on a limited amount of information from shower physics. Some capabilities and limitations of the proposed method are discussed. In order to achieve a realistic description of the primary mass composition, we pay special attention to the choice of the parameters of the sup...
A Maximum Resonant Set of Polyomino Graphs
Zhang Heping
2016-05-01
Full Text Available A polyomino graph P is a connected finite subgraph of the infinite plane grid such that each finite face is surrounded by a regular square of side length one and each edge belongs to at least one square. A dimer covering of P corresponds to a perfect matching. Different dimer coverings can interact via an alternating cycle (or square with respect to them. A set of disjoint squares of P is a resonant set if P has a perfect matching M so that each one of those squares is M-alternating. In this paper, we show that if K is a maximum resonant set of P, then P − K has a unique perfect matching. We further prove that the maximum forcing number of a polyomino graph is equal to the cardinality of a maximum resonant set. This confirms a conjecture of Xu et al. [26]. We also show that if K is a maximal alternating set of P, then P − K has a unique perfect matching.
Minimal Length, Friedmann Equations and Maximum Density
Awad, Adel
2014-01-01
Inspired by Jacobson's thermodynamic approach[gr-qc/9504004], Cai et al [hep-th/0501055,hep-th/0609128] have shown the emergence of Friedmann equations from the first law of thermodynamics. We extend Akbar--Cai derivation [hep-th/0609128] of Friedmann equations to accommodate a general entropy-area law. Studying the resulted Friedmann equations using a specific entropy-area law, which is motivated by the generalized uncertainty principle (GUP), reveals the existence of a maximum energy density closed to Planck density. Allowing for a general continuous pressure $p(\\rho,a)$ leads to bounded curvature invariants and a general nonsingular evolution. In this case, the maximum energy density is reached in a finite time and there is no cosmological evolution beyond this point which leaves the big bang singularity inaccessible from a spacetime prospective. The existence of maximum energy density and a general nonsingular evolution is independent of the equation of state and the spacial curvature $k$. As an example w...
Maximum saliency bias in binocular fusion
Lu, Yuhao; Stafford, Tom; Fox, Charles
2016-07-01
Subjective experience at any instant consists of a single ("unitary"), coherent interpretation of sense data rather than a "Bayesian blur" of alternatives. However, computation of Bayes-optimal actions has no role for unitary perception, instead being required to integrate over every possible action-percept pair to maximise expected utility. So what is the role of unitary coherent percepts, and how are they computed? Recent work provided objective evidence for non-Bayes-optimal, unitary coherent, perception and action in humans; and further suggested that the percept selected is not the maximum a posteriori percept but is instead affected by utility. The present study uses a binocular fusion task first to reproduce the same effect in a new domain, and second, to test multiple hypotheses about exactly how utility may affect the percept. After accounting for high experimental noise, it finds that both Bayes optimality (maximise expected utility) and the previously proposed maximum-utility hypothesis are outperformed in fitting the data by a modified maximum-salience hypothesis, using unsigned utility magnitudes in place of signed utilities in the bias function.
2011-01-01
In this paper, the coupling effect between the concentration of phosphorus in water and the velocity and distance of vertical transport of cyanobacteria aggregates was investigated by establishing a phosphorus quota model of interior nutrition condition in cyanobacteria cell and studying the influence of the concentration of phosphorus in water on vertical transport of cyanobacteria aggregates. The results show that the phosphorus quota in cyanobacteria cells is closely related to the concentration of phosphorus in water. When the concentration of phosphorus in water reaches 0.075 mg. L- 1, water bloom does not occur easily. Maximum migration distance of cyanobacteria aggregates is close to 4 m when the concentration reaches to 0.09 rog. L - 1,and algae bloom easily. When the concentration is 0.1 mg·L-1 cyanobacteria aggregates move up to the surface of water and no longer move downward, Algae blooms occur.
Hemostatic abnormalities in dogs with naturally occurring heatstroke.
Bruchim, Yaron; Kelmer, Efrat; Cohen, Adar; Codner, Carolina; Segev, Gilad; Aroch, Itamar
2017-05-01
To investigate hemostatic analyte abnormalities and their association with mortality in dogs with naturally occurring heatstroke. Prospective observational study. University teaching hospital. Thirty client-owned dogs with naturally occurring heatstroke. None. Citrated and EDTA blood samples were collected at presentation and at 4, 12, 24, 36, and 48 hours postpresentation (PP). Hemostatic tests performed included platelet count, prothrombin and activated partial thromboplastin times (PT and aPTT, respectively), antithrombin activity (ATA), total protein C activity (tPCA), fibrinogen, and D-dimer concentrations. The overall survival rate was 60% (18/30 dogs). Older age, higher heart rate and rectal temperature at presentation, and time from onset of clinical signs to presentation were significantly associated with mortality. Hemostatic analytes at presentation were not associated with mortality. Prolonged PT and aPTT at 12-24 hours PP, lower tPCA at 12 hours PP, and hypofibrinogenemia at 24 hours PP were significantly (P ATA were common at all time points, but were not associated with mortality. The frequency of disseminated intravascular coagulation (DIC) increased in nonsurvivors throughout hospitalization, but the development of DIC was not associated with mortality. The number of abnormal coagulation disturbances during the first 24 hours was significantly higher in nonsurvivors (P = 0.04). Hemostatic derangements are common in dogs with naturally occurring heatstroke. Alterations in PT, aPTT, tPCA, and fibrinogen concentrations appear to be associated with the outcome at 12-24 hours PP, exemplifying the need for serial measurement of multiple laboratory hemostatic tests during hospitalization, even when within reference interval on presentation. The development of DIC, as defined in this cohort, was not associated with mortality; however, nonsurvivors had significantly more coagulation abnormalities during the first 24 hours PP. © Veterinary Emergency and
The effect of natural selection on the performance of maximum parsimony
Ofria Charles
2007-06-01
Full Text Available Abstract Background Maximum parsimony is one of the most commonly used and extensively studied phylogeny reconstruction methods. While current evaluation methodologies such as computer simulations provide insight into how well maximum parsimony reconstructs phylogenies, they tell us little about how well maximum parsimony performs on taxa drawn from populations of organisms that evolved subject to natural selection in addition to the random factors of drift and mutation. It is clear that natural selection has a significant impact on Among Site Rate Variation (ASRV and the rate of accepted substitutions; that is, accepted mutations do not occur with uniform probability along the genome and some substitutions are more likely to occur than other substitutions. However, little is know about how ASRV and non-uniform character substitutions impact the performance of reconstruction methods such as maximum parsimony. To gain insight into these issues, we study how well maximum parsimony performs with data generated by Avida, a digital life platform where populations of digital organisms evolve subject to natural selective pressures. Results We first identify conditions where natural selection does affect maximum parsimony's reconstruction accuracy. In general, as we increase the probability that a significant adaptation will occur in an intermediate ancestor, the performance of maximum parsimony improves. In fact, maximum parsimony can correctly reconstruct small 4 taxa trees on data that have received surprisingly many mutations if the intermediate ancestor has received a significant adaptation. We demonstrate that this improved performance of maximum parsimony is attributable more to ASRV than to non-uniform character substitutions. Conclusion Maximum parsimony, as well as most other phylogeny reconstruction methods, may perform significantly better on actual biological data than is currently suggested by computer simulation studies because of natural
Intravenous Topiramate: Pharmacokinetics in Dogs with Naturally-Occurring Epilepsy
Irene Vuu
2016-12-01
Full Text Available Barriers to developing treatments for human status epilepticus (SE include the inadequacy of experimental animal models. In contrast, naturally-occurring canine epilepsy is similar to the human condition and can serve as a platform to translate research from rodents to humans. The objectives of this study were to characterize the pharmacokinetics (PK of an intravenous (IV dose of topiramate (TPM in dogs with epilepsy, and evaluate its effect on intracranial electroencephalographic (iEEG features. Five dogs with naturally occurring epilepsy were used for this study. Three were getting at least one antiseizure drug as maintenance therapy including phenobarbital (PB. Four (ID 1-4 were used for the 10 mg/kg IV TPM + PO TPM study, and three (ID 3-5 were used for the 20 mg/kg IV TPM study. IV TPM was infused over 5 minutes at both doses. The animals were observed for vomiting, diarrhea, ataxia, and lethargy. Blood samples were collected at scheduled pre- and post-dose times. Plasma concentrations were measured using a validated HPLC-MS method. Non-compartmental and population compartmental modeling were performed (Phoenix WinNonLin and NLME using plasma concentrations from all dogs in the study. Intracranial EEG (iEEG was acquired in one dog. The difference between averaged iEEG energy levels at 15 minutes pre- and post-dose was assessed using a Kruskal-Wallis test. No adverse events were noted. Topiramate concentration-time profiles were best fit by a two-compartment model. PB co-administration was associated with a 5.6 fold greater clearance and a ~4 fold shorter elimination half-life. iEEG data showed that TPM produced a significant energy increase at frequencies >4 Hz across all 16 electrodes within 15 minutes of dosing. Simulations suggested that dogs on an enzyme inducer would require 25 mg/kg, while dogs on non-inducing drugs would need 20 mg/kg to attain the target concentration (20-30 µg/mL at 30-minutes post-dose.This study shows that IV
Study on the Correlation Between Chlorophyll Maximum and Remote Sensing Data
XIU Peng; LIU Yuguang
2006-01-01
Based on the in situ optical measurements in the Bohai Sea of China, which belongs to a typical case-2 water area, we studied the characteristics of DCM (deep chlorophyll maximum) such as its spatial distribution, vertical profile,etc.We found that when the depth of the chlorophyll maximum is comparatively small, even in turbid coastal water regions,there is always a good correlation between the concentrations of chlorophyll maximum and the satellite-received signals in blue-green spectral bands; the correlation is even better than that between the surface chlorophyll concentrations and the satellite-received signals.The strong correlation existing even in turbid coastal water regions indicates that an ocean color model to retrieve the concentration of DCM can be constructed for coastal waters if a comprehensive knowledge of the vertical distribution of chlorophyll concentration in the Bohai Sea of China is available.
Maximum power operation of interacting molecular motors
Golubeva, Natalia; Imparato, Alberto
2013-01-01
We study the mechanical and thermodynamic properties of different traffic models for kinesin which are relevant in biological and experimental contexts. We find that motor-motor interactions play a fundamental role by enhancing the thermodynamic efficiency at maximum power of the motors......, as compared to the non-interacting system, in a wide range of biologically compatible scenarios. We furthermore consider the case where the motor-motor interaction directly affects the internal chemical cycle and investigate the effect on the system dynamics and thermodynamics....
Maximum a posteriori decoder for digital communications
Altes, Richard A. (Inventor)
1997-01-01
A system and method for decoding by identification of the most likely phase coded signal corresponding to received data. The present invention has particular application to communication with signals that experience spurious random phase perturbations. The generalized estimator-correlator uses a maximum a posteriori (MAP) estimator to generate phase estimates for correlation with incoming data samples and for correlation with mean phases indicative of unique hypothesized signals. The result is a MAP likelihood statistic for each hypothesized transmission, wherein the highest value statistic identifies the transmitted signal.
Kernel-based Maximum Entropy Clustering
JIANG Wei; QU Jiao; LI Benxi
2007-01-01
With the development of Support Vector Machine (SVM),the "kernel method" has been studied in a general way.In this paper,we present a novel Kernel-based Maximum Entropy Clustering algorithm (KMEC).By using mercer kernel functions,the proposed algorithm is firstly map the data from their original space to high dimensional space where the data are expected to be more separable,then perform MEC clustering in the feature space.The experimental results show that the proposed method has better performance in the non-hyperspherical and complex data structure.
The sun and heliosphere at solar maximum.
Smith, E J; Marsden, R G; Balogh, A; Gloeckler, G; Geiss, J; McComas, D J; McKibben, R B; MacDowall, R J; Lanzerotti, L J; Krupp, N; Krueger, H; Landgraf, M
2003-11-14
Recent Ulysses observations from the Sun's equator to the poles reveal fundamental properties of the three-dimensional heliosphere at the maximum in solar activity. The heliospheric magnetic field originates from a magnetic dipole oriented nearly perpendicular to, instead of nearly parallel to, the Sun's rotation axis. Magnetic fields, solar wind, and energetic charged particles from low-latitude sources reach all latitudes, including the polar caps. The very fast high-latitude wind and polar coronal holes disappear and reappear together. Solar wind speed continues to be inversely correlated with coronal temperature. The cosmic ray flux is reduced symmetrically at all latitudes.
Conductivity maximum in a charged colloidal suspension
Bastea, S
2009-01-27
Molecular dynamics simulations of a charged colloidal suspension in the salt-free regime show that the system exhibits an electrical conductivity maximum as a function of colloid charge. We attribute this behavior to two main competing effects: colloid effective charge saturation due to counterion 'condensation' and diffusion slowdown due to the relaxation effect. In agreement with previous observations, we also find that the effective transported charge is larger than the one determined by the Stern layer and suggest that it corresponds to the boundary fluid layer at the surface of the colloidal particles.
Maximum entropy signal restoration with linear programming
Mastin, G.A.; Hanson, R.J.
1988-05-01
Dantzig's bounded-variable method is used to express the maximum entropy restoration problem as a linear programming problem. This is done by approximating the nonlinear objective function with piecewise linear segments, then bounding the variables as a function of the number of segments used. The use of a linear programming approach allows equality constraints found in the traditional Lagrange multiplier method to be relaxed. A robust revised simplex algorithm is used to implement the restoration. Experimental results from 128- and 512-point signal restorations are presented.
COMPARISON BETWEEN FORMULAS OF MAXIMUM SHIP SQUAT
PETRU SERGIU SERBAN
2016-06-01
Full Text Available Ship squat is a combined effect of ship’s draft and trim increase due to ship motion in limited navigation conditions. Over time, researchers conducted tests on models and ships to find a mathematical formula that can define squat. Various forms of calculating squat can be found in the literature. Among those most commonly used are of Barrass, Millward, Eryuzlu or ICORELS. This paper presents a comparison between the squat formulas to see the differences between them and which one provides the most satisfactory results. In this respect a cargo ship at different speeds was considered as a model for maximum squat calculations in canal navigation conditions.
Multi-Channel Maximum Likelihood Pitch Estimation
Christensen, Mads Græsbøll
2012-01-01
In this paper, a method for multi-channel pitch estimation is proposed. The method is a maximum likelihood estimator and is based on a parametric model where the signals in the various channels share the same fundamental frequency but can have different amplitudes, phases, and noise characteristics....... This essentially means that the model allows for different conditions in the various channels, like different signal-to-noise ratios, microphone characteristics and reverberation. Moreover, the method does not assume that a certain array structure is used but rather relies on a more general model and is hence...
Maximum entropy PDF projection: A review
Baggenstoss, Paul M.
2017-06-01
We review maximum entropy (MaxEnt) PDF projection, a method with wide potential applications in statistical inference. The method constructs a sampling distribution for a high-dimensional vector x based on knowing the sampling distribution p(z) of a lower-dimensional feature z = T (x). Under mild conditions, the distribution p(x) having highest possible entropy among all distributions consistent with p(z) may be readily found. Furthermore, the MaxEnt p(x) may be sampled, making the approach useful in Monte Carlo methods. We review the theorem and present a case study in model order selection and classification for handwritten character recognition.
CORA: Emission Line Fitting with Maximum Likelihood
Ness, Jan-Uwe; Wichmann, Rainer
2011-12-01
CORA analyzes emission line spectra with low count numbers and fits them to a line using the maximum likelihood technique. CORA uses a rigorous application of Poisson statistics. From the assumption of Poissonian noise, the software derives the probability for a model of the emission line spectrum to represent the measured spectrum. The likelihood function is used as a criterion for optimizing the parameters of the theoretical spectrum and a fixed point equation is derived allowing an efficient way to obtain line fluxes. CORA has been applied to an X-ray spectrum with the Low Energy Transmission Grating Spectrometer (LETGS) on board the Chandra observatory.
Dynamical maximum entropy approach to flocking
Cavagna, Andrea; Giardina, Irene; Ginelli, Francesco; Mora, Thierry; Piovani, Duccio; Tavarone, Raffaele; Walczak, Aleksandra M.
2014-04-01
We derive a new method to infer from data the out-of-equilibrium alignment dynamics of collectively moving animal groups, by considering the maximum entropy model distribution consistent with temporal and spatial correlations of flight direction. When bird neighborhoods evolve rapidly, this dynamical inference correctly learns the parameters of the model, while a static one relying only on the spatial correlations fails. When neighbors change slowly and the detailed balance is satisfied, we recover the static procedure. We demonstrate the validity of the method on simulated data. The approach is applicable to other systems of active matter.
Maximum Temperature Detection System for Integrated Circuits
Frankiewicz, Maciej; Kos, Andrzej
2015-03-01
The paper describes structure and measurement results of the system detecting present maximum temperature on the surface of an integrated circuit. The system consists of the set of proportional to absolute temperature sensors, temperature processing path and a digital part designed in VHDL. Analogue parts of the circuit where designed with full-custom technique. The system is a part of temperature-controlled oscillator circuit - a power management system based on dynamic frequency scaling method. The oscillator cooperates with microprocessor dedicated for thermal experiments. The whole system is implemented in UMC CMOS 0.18 μm (1.8 V) technology.
Zipf's law and maximum sustainable growth
Malevergne, Y; Sornette, D
2010-01-01
Zipf's law states that the number of firms with size greater than S is inversely proportional to S. Most explanations start with Gibrat's rule of proportional growth but require additional constraints. We show that Gibrat's rule, at all firm levels, yields Zipf's law under a balance condition between the effective growth rate of incumbent firms (which includes their possible demise) and the growth rate of investments in entrant firms. Remarkably, Zipf's law is the signature of the long-term optimal allocation of resources that ensures the maximum sustainable growth rate of an economy.
Estimating the Size and Timing of the Maximum Amplitude of Solar Cycle 24
Ke-Jun Li; Peng-Xin Gao; Tong-Wei Su
2005-01-01
A simple statistical method is used to estimate the size and timing of maximum amplitude of the next solar cycle (cycle 24). Presuming cycle 23 to be a short cycle (as is more likely), the minimum of cycle 24 should occur about December 2006 (±2 months) and the maximum, around March 2011 (±9 months),and the amplitude is 189.9 ± 15.5, if it is a fast riser, or about 136, if it is a slow riser. If we presume cycle 23 to be a long cycle (as is less likely), the minimum of cycle 24 should occur about June 2008 (±2 months) and the maximum, about February 2013 (±8 months) and the maximum will be about 137 or 80, according as the cycle is a fast riser or a slow riser.
LIU Lin; FENG Lin; YU Weidong; WANG Huiwu; LIU Yanliang; SUN Shuangwen
2013-01-01
Performances of 5 models from the Coupled Model Intercomparison Project Phase 5 (CMIP5) in simulating the chlorophyll concentration over the tropical Indian Ocean are evaluated.Results show that these models are able to capture the dominant spatial distribution of observed chlorophyll concentration and reproduce the maximum chlorophyll concentration over the western part of the Arabian Sea,around the tip of the Indian subcontinent,and in the southeast tropical Indian Ocean.The seasonal evolution of chlorophyll concentration over these regions is also reproduced with significant amplitude diversity among models.All of 5 models is able to simulate the interannual variability of chlorophyll concentration.The maximum interannual variation occurs at the same regions where the maximum climatological chlorophyll concentration is located.Further analysis also reveals that the Indian Ocean Dipole events have great impact on chlorophyll concentration in the tropical Indian Ocean.In the general successful simulation of chlorophyll concentration,most of the CMIP5 models present higher than normal chlorophyll concentration in the eastern equatorial Indian Ocean.
Accurate structural correlations from maximum likelihood superpositions.
Douglas L Theobald
2008-02-01
Full Text Available The cores of globular proteins are densely packed, resulting in complicated networks of structural interactions. These interactions in turn give rise to dynamic structural correlations over a wide range of time scales. Accurate analysis of these complex correlations is crucial for understanding biomolecular mechanisms and for relating structure to function. Here we report a highly accurate technique for inferring the major modes of structural correlation in macromolecules using likelihood-based statistical analysis of sets of structures. This method is generally applicable to any ensemble of related molecules, including families of nuclear magnetic resonance (NMR models, different crystal forms of a protein, and structural alignments of homologous proteins, as well as molecular dynamics trajectories. Dominant modes of structural correlation are determined using principal components analysis (PCA of the maximum likelihood estimate of the correlation matrix. The correlations we identify are inherently independent of the statistical uncertainty and dynamic heterogeneity associated with the structural coordinates. We additionally present an easily interpretable method ("PCA plots" for displaying these positional correlations by color-coding them onto a macromolecular structure. Maximum likelihood PCA of structural superpositions, and the structural PCA plots that illustrate the results, will facilitate the accurate determination of dynamic structural correlations analyzed in diverse fields of structural biology.
Maximum entropy production and the fluctuation theorem
Dewar, R C [Unite EPHYSE, INRA Centre de Bordeaux-Aquitaine, BP 81, 33883 Villenave d' Ornon Cedex (France)
2005-05-27
Recently the author used an information theoretical formulation of non-equilibrium statistical mechanics (MaxEnt) to derive the fluctuation theorem (FT) concerning the probability of second law violating phase-space paths. A less rigorous argument leading to the variational principle of maximum entropy production (MEP) was also given. Here a more rigorous and general mathematical derivation of MEP from MaxEnt is presented, and the relationship between MEP and the FT is thereby clarified. Specifically, it is shown that the FT allows a general orthogonality property of maximum information entropy to be extended to entropy production itself, from which MEP then follows. The new derivation highlights MEP and the FT as generic properties of MaxEnt probability distributions involving anti-symmetric constraints, independently of any physical interpretation. Physically, MEP applies to the entropy production of those macroscopic fluxes that are free to vary under the imposed constraints, and corresponds to selection of the most probable macroscopic flux configuration. In special cases MaxEnt also leads to various upper bound transport principles. The relationship between MaxEnt and previous theories of irreversible processes due to Onsager, Prigogine and Ziegler is also clarified in the light of these results. (letter to the editor)
Thermodynamic hardness and the maximum hardness principle
Franco-Pérez, Marco; Gázquez, José L.; Ayers, Paul W.; Vela, Alberto
2017-08-01
An alternative definition of hardness (called the thermodynamic hardness) within the grand canonical ensemble formalism is proposed in terms of the partial derivative of the electronic chemical potential with respect to the thermodynamic chemical potential of the reservoir, keeping the temperature and the external potential constant. This temperature dependent definition may be interpreted as a measure of the propensity of a system to go through a charge transfer process when it interacts with other species, and thus it keeps the philosophy of the original definition. When the derivative is expressed in terms of the three-state ensemble model, in the regime of low temperatures and up to temperatures of chemical interest, one finds that for zero fractional charge, the thermodynamic hardness is proportional to T-1(I -A ) , where I is the first ionization potential, A is the electron affinity, and T is the temperature. However, the thermodynamic hardness is nearly zero when the fractional charge is different from zero. Thus, through the present definition, one avoids the presence of the Dirac delta function. We show that the chemical hardness defined in this way provides meaningful and discernible information about the hardness properties of a chemical species exhibiting integer or a fractional average number of electrons, and this analysis allowed us to establish a link between the maximum possible value of the hardness here defined, with the minimum softness principle, showing that both principles are related to minimum fractional charge and maximum stability conditions.
Maximum Likelihood Analysis in the PEN Experiment
Lehman, Martin
2013-10-01
The experimental determination of the π+ -->e+ ν (γ) decay branching ratio currently provides the most accurate test of lepton universality. The PEN experiment at PSI, Switzerland, aims to improve the present world average experimental precision of 3 . 3 ×10-3 to 5 ×10-4 using a stopped beam approach. During runs in 2008-10, PEN has acquired over 2 ×107 πe 2 events. The experiment includes active beam detectors (degrader, mini TPC, target), central MWPC tracking with plastic scintillator hodoscopes, and a spherical pure CsI electromagnetic shower calorimeter. The final branching ratio will be calculated using a maximum likelihood analysis. This analysis assigns each event a probability for 5 processes (π+ -->e+ ν , π+ -->μ+ ν , decay-in-flight, pile-up, and hadronic events) using Monte Carlo verified probability distribution functions of our observables (energies, times, etc). A progress report on the PEN maximum likelihood analysis will be presented. Work supported by NSF grant PHY-0970013.
GROWTH OF NATURALLY OCCURING Listeria innocua IN COPPA DI TESTA
G. Merialdi
2010-06-01
Full Text Available Coppa di testa is a traditional cooked pork salami produced in different Italian regions. The main raw material is deboned meat of pork head with the addition of tongue and rind. After a long (3-5 h high temperature (97°C cooking, additives and flavourings are added and the salami is prepared. After cooling the salami is often portioned and vacuum- packaged. In this study the growth of naturally occurring contamination of Listeria innocua in three batches of vacuum packaged Coppa di testa, stored at 4°C for 80 days, is described. The average max was 0.24 (days-1 and the average doubling time was 2.87 days. The maximum growth level ranged from 4.90 to 8.17 (log10 cfu/g. These results indicate that Coppa di testa definitely supports the growth of Listeria innocua in the considered storage conditions. Taking into account that at 4°C Listeria monocytogenes strains are associated with higher grow rates than L. innocua, these results emphasize the importance of preventing Listeria monocytogenes contamination in the production stages following cooking.
BINDER DRAINAGE TEST FOR POROUS MIXTURES MADE BY VARYING THE MAXIMUM AGGREGATE SIZES
Hardiman Hardiman
2004-01-01
Full Text Available Binder drainage occurs with mixes of small aggregate surface area particularly porous asphalt. The binder drainage test, developed by the Transport Research Laboratory, UK, is commonly used to set an upper limit on the acceptable binder content for a porous mix. This paper presents the results of a laboratory investigation to determine the effects of different binder types on the binder drainage characteristics of porous mix made of various maximum aggregate sizes 20, 14 and 10 mm. Two types of binder were used, conventional 60/70 pen bitumen, and styrene butadiene styrene (SBS modified bitumen. The amount of binder lost through drainage after three hours at the maximum mixing temperature were measured in duplicate for mixes of different maximum sizes and binder contents. The maximum mixing temperature adopted depends on the types of binder used. The retained binder is plotted against the initial mixed binder content, together with the line of equality where the retained binder equals the mixed binder content. The results indicate the significant contribution of using SBS modified bitumen to increase the target bitumen binder content. Their significance is discussed in terms of target binder content, the critical binder content, the maximum mixed binder content and the maximum retained binder content values obtained from the binder drainage test. It was concluded that increasing maximum aggregate sizes decrease the maximum retained binder content, critical binder content, target binder content, maximum mixed binder content, and mixed content for both binders, but however for all mixtures, SBS is the highest.
Estimating landscape carrying capacity through maximum clique analysis.
Donovan, Therese M; Warrington, Gregory S; Schwenk, W Scott; Dinitz, Jeffrey H
2012-12-01
Habitat suitability (HS) maps are widely used tools in wildlife science and establish a link between wildlife populations and landscape pattern. Although HS maps spatially depict the distribution of optimal resources for a species, they do not reveal the population size a landscape is capable of supporting--information that is often crucial for decision makers and managers. We used a new approach, "maximum clique analysis," to demonstrate how HS maps for territorial species can be used to estimate the carrying capacity, N(k), of a given landscape. We estimated the N(k) of Ovenbirds (Seiurus aurocapillus) and bobcats (Lynx rufus) in an 1153-km2 study area in Vermont, USA. These two species were selected to highlight different approaches in building an HS map as well as computational challenges that can arise in a maximum clique analysis. We derived 30-m2 HS maps for each species via occupancy modeling (Ovenbird) and by resource utilization modeling (bobcats). For each species, we then identified all pixel locations on the map (points) that had sufficient resources in the surrounding area to maintain a home range (termed a "pseudo-home range"). These locations were converted to a mathematical graph, where any two points were linked if two pseudo-home ranges could exist on the landscape without violating territory boundaries. We used the program Cliquer to find the maximum clique of each graph. The resulting estimates of N(k) = 236 Ovenbirds and N(k) = 42 female bobcats were sensitive to different assumptions and model inputs. Estimates of N(k) via alternative, ad hoc methods were 1.4 to > 30 times greater than the maximum clique estimate, suggesting that the alternative results may be upwardly biased. The maximum clique analysis was computationally intensive but could handle problems with < 1500 total pseudo-home ranges (points). Given present computational constraints, it is best suited for species that occur in clustered distributions (where the problem can be
OCCURANCE OF HISTAMINE IN FISH PRODUCTS ON MARKET
R. Mancusi
2012-08-01
Full Text Available Histamine fish poisoning is quite common and occur in consequence of microbial decarboxylase whose activity begin early in the post-mortem but are triggered in consequence of abuse in the shelf life of fish products. In this study forty-eight samples of tuna, mackerel, anchovies, sardines, fresh or processed were sampled from fish shops and supermarkets in the City of Bologna in the period from January to July 2010. Concentration of histamine was assessed using ELISA quantitative test and presence of psicrotrophic histamine forming bacteria was searched using a modified Niven agar medium which allow detection of suspect colonies that were confirmed by PCR for detecting the presence of the histidine decarboxylase genes in their DNA. The positive colonies were then identified on the basis of their morphology, Gram reaction and biochemical characteristics with API20E. The differential capability of the Niven agar was found to be low and approximately one fifth of the suspect colonies were confirmed by the PCR test, which however included both strong and weak histamine producing strains. The presence of Morganella morganii was associated with concentration of histamine 460 mg∙kg-1 above the allowed limit in a sample of tuna sampled from a fish shop. The same bacterium was found in samples of Atlantic horse mackerel (Trachurus trachurus. High histamine concentration (between 258 and > 300 mg∙kg-1 were observed in salted European pilchard and European anchovy (228 mg∙kg-1 sold loose in supermarkets. Because temperature abuse could occur when Tuna (fresh/defrozen are hold on chopping board to sell fresh cuts and during shelf life of salted pilchard and pickled anchovies held in opened cans in chilled display cabinets for extended period, which might results in very high histamine concentration, controls on time and temperature at the retail, in addition to those done during the harvest and processing are needed. The studies aiming at
Wang, J Y
1998-08-01
DNA twist has been proposed to affect transcription from some promoters of Escherichia coli, but involvement of twist has been difficult to test because it cannot be measured in transcription reaction mixtures. However, changes in other factors affect both DNA twist and transcription. These parameters are expected to be related when maximum transcription initiation is considered. In the present work, mathematical relationships among supercoiling, cation concentration, and temperature are derived for prokaryotic transcription initiation. The relationships indicate that as DNA becomes more negatively supercoiled, maximal initiation occurs at a higher cation concentration and at a lower temperature. For example, when superhelical density becomes more negative by 0.0025, a 1.6-fold increase in potassium concentration is predicted to be required to maintain transcription initiation at its maximum rate. Experimental verification of the relationships should provide a useful test of the idea that transcription initiation is sensitive to DNA twist.
Sullivan, T. [Brookhaven National Lab. (BNL), Upton, NY (United States)
2016-05-20
ZionSolutions is in the process of decommissioning the Zion Nuclear Power Station (ZNPS). After decommissioning is completed, the site will contain two reactor Containment Buildings, the Fuel Handling Building and Transfer Canals, Auxiliary Building, Turbine Building, Crib House/Forebay, and a Waste Water Treatment Facility that have been demolished to a depth of 3 feet below grade. Additional below ground structures remaining will include the Main Steam Tunnels and large diameter intake and discharge pipes. These additional structures are not included in the modeling described in this report but the inventory remaining (expected to be very low) will be included with one of the structures that are modeled as designated in the Zion Station Restoration Project (ZSRP) License Termination Plan (LTP). The remaining underground structures will be backfilled with clean material. The final selection of fill material has not been made.
Lake Basin Fetch and Maximum Length/Width
Minnesota Department of Natural Resources — Linear features representing the Fetch, Maximum Length and Maximum Width of a lake basin. Fetch, maximum length and average width are calcuated from the lake polygon...
Odoom, J A; Dokter, P W; Sturk, A; Ten Cate, J W; Sih, I L; Bovill, J G
1988-09-01
The effect of epidural anaesthesia with bupivacaine 0.5% on platelet aggregation was studied in seven patients undergoing transurethral resection of the prostate. Peak plasma concentrations of bupivacaine 470 +/- 270 ng ml-1 occurred at 30 min after administration. At that time there were no significant changes in platelet aggregation. However, the maximum rate of the primary- and secondary-aggregation velocities induced by 1.0 microM ADP were significantly decreased at 1 h and 3 h after bupivacaine administration. The maximum percentage ADP-induced platelet aggregation was also decreased significantly at 1 h and 3 h. The minimum concentration of ADP required to induce secondary-phase platelet aggregation was significantly increased at 1 h but not at 3 h. There was a significant correlation between bupivacaine concentrations and all platelet aggregation parameters except the maximum ADP-induced aggregation. Platelet inhibition occurred at plasma bupivacaine concentrations that were considerably lower than those needed to produce similar inhibition in vitro.
Uranium isotopes in groundwater occurring at Amazonas State, Brazil.
da Silva, Márcio Luiz; Bonotto, Daniel Marcos
2015-03-01
This paper reports the behavior of the dissolved U-isotopes (238)U and (234)U in groundwater providing from 15 cities in Amazonas State, Brazil. The isotope dilution technique accompanied by alpha spectrometry were utilized for acquiring the U content and (234)U/(238)U activity ratio (AR) data, 0.01-1.4µgL(-1) and 1.0-3.5, respectively. These results suggest that the water is circulating in a reducing environment and leaching strata containing minerals with low uranium concentration. A tendency to increasing ARs values following the groundwater flow direction is identified in Manaus city. The AR also increases according to the SW-NE directions: Uarini→Tefé; Manacapuru→Manaus; Presidente Figueiredo→São Sebastião do Uatumã; and Boa Vista do Ramos→Parintins. Such trends are possibly related to several factors, among them the increasing acid character of the waters. The waters analyzed are used for human consumption and the highest dissolved U content is much lower than the maximum established by the World Health Organization. Therefore, in view of this radiological parameter they can be used for drinking purposes. Copyright © 2014 Elsevier Ltd. All rights reserved.
Maximum entropy principle and texture formation
Arminjon, M; Arminjon, Mayeul; Imbault, Didier
2006-01-01
The macro-to-micro transition in a heterogeneous material is envisaged as the selection of a probability distribution by the Principle of Maximum Entropy (MAXENT). The material is made of constituents, e.g. given crystal orientations. Each constituent is itself made of a large number of elementary constituents. The relevant probability is the volume fraction of the elementary constituents that belong to a given constituent and undergo a given stimulus. Assuming only obvious constraints in MAXENT means describing a maximally disordered material. This is proved to have the same average stimulus in each constituent. By adding a constraint in MAXENT, a new model, potentially interesting e.g. for texture prediction, is obtained.
MLDS: Maximum Likelihood Difference Scaling in R
Kenneth Knoblauch
2008-01-01
Full Text Available The MLDS package in the R programming language can be used to estimate perceptual scales based on the results of psychophysical experiments using the method of difference scaling. In a difference scaling experiment, observers compare two supra-threshold differences (a,b and (c,d on each trial. The approach is based on a stochastic model of how the observer decides which perceptual difference (or interval (a,b or (c,d is greater, and the parameters of the model are estimated using a maximum likelihood criterion. We also propose a method to test the model by evaluating the self-consistency of the estimated scale. The package includes an example in which an observer judges the differences in correlation between scatterplots. The example may be readily adapted to estimate perceptual scales for arbitrary physical continua.
Maximum Profit Configurations of Commercial Engines
Yiran Chen
2011-06-01
Full Text Available An investigation of commercial engines with finite capacity low- and high-price economic subsystems and a generalized commodity transfer law [n ∝ Δ (P m] in commodity flow processes, in which effects of the price elasticities of supply and demand are introduced, is presented in this paper. Optimal cycle configurations of commercial engines for maximum profit are obtained by applying optimal control theory. In some special cases, the eventual state—market equilibrium—is solely determined by the initial conditions and the inherent characteristics of two subsystems; while the different ways of transfer affect the model in respects of the specific forms of the paths of prices and the instantaneous commodity flow, i.e., the optimal configuration.
Maximum Segment Sum, Monadically (distilled tutorial
Jeremy Gibbons
2011-09-01
Full Text Available The maximum segment sum problem is to compute, given a list of integers, the largest of the sums of the contiguous segments of that list. This problem specification maps directly onto a cubic-time algorithm; however, there is a very elegant linear-time solution too. The problem is a classic exercise in the mathematics of program construction, illustrating important principles such as calculational development, pointfree reasoning, algebraic structure, and datatype-genericity. Here, we take a sideways look at the datatype-generic version of the problem in terms of monadic functional programming, instead of the traditional relational approach; the presentation is tutorial in style, and leavened with exercises for the reader.
Maximum Information and Quantum Prediction Algorithms
McElwaine, J N
1997-01-01
This paper describes an algorithm for selecting a consistent set within the consistent histories approach to quantum mechanics and investigates its properties. The algorithm uses a maximum information principle to select from among the consistent sets formed by projections defined by the Schmidt decomposition. The algorithm unconditionally predicts the possible events in closed quantum systems and ascribes probabilities to these events. A simple spin model is described and a complete classification of all exactly consistent sets of histories formed from Schmidt projections in the model is proved. This result is used to show that for this example the algorithm selects a physically realistic set. Other tentative suggestions in the literature for set selection algorithms using ideas from information theory are discussed.
Maximum process problems in optimal control theory
Goran Peskir
2005-01-01
Full Text Available Given a standard Brownian motion (Btt≥0 and the equation of motion dXt=vtdt+2dBt, we set St=max0≤s≤tXs and consider the optimal control problem supvE(Sτ−Cτ, where c>0 and the supremum is taken over all admissible controls v satisfying vt∈[μ0,μ1] for all t up to τ=inf{t>0|Xt∉(ℓ0,ℓ1} with μ0g∗(St, where s↦g∗(s is a switching curve that is determined explicitly (as the unique solution to a nonlinear differential equation. The solution found demonstrates that the problem formulations based on a maximum functional can be successfully included in optimal control theory (calculus of variations in addition to the classic problem formulations due to Lagrange, Mayer, and Bolza.
Maximum Spectral Luminous Efficacy of White Light
Murphy, T W
2013-01-01
As lighting efficiency improves, it is useful to understand the theoretical limits to luminous efficacy for light that we perceive as white. Independent of the efficiency with which photons are generated, there exists a spectrally-imposed limit to the luminous efficacy of any source of photons. We find that, depending on the acceptable bandpass and---to a lesser extent---the color temperature of the light, the ideal white light source achieves a spectral luminous efficacy of 250--370 lm/W. This is consistent with previous calculations, but here we explore the maximum luminous efficacy as a function of photopic sensitivity threshold, color temperature, and color rendering index; deriving peak performance as a function of all three parameters. We also present example experimental spectra from a variety of light sources, quantifying the intrinsic efficacy of their spectral distributions.
Maximum entropy model for business cycle synchronization
Xi, Ning; Muneepeerakul, Rachata; Azaele, Sandro; Wang, Yougui
2014-11-01
The global economy is a complex dynamical system, whose cyclical fluctuations can mainly be characterized by simultaneous recessions or expansions of major economies. Thus, the researches on the synchronization phenomenon are key to understanding and controlling the dynamics of the global economy. Based on a pairwise maximum entropy model, we analyze the business cycle synchronization of the G7 economic system. We obtain a pairwise-interaction network, which exhibits certain clustering structure and accounts for 45% of the entire structure of the interactions within the G7 system. We also find that the pairwise interactions become increasingly inadequate in capturing the synchronization as the size of economic system grows. Thus, higher-order interactions must be taken into account when investigating behaviors of large economic systems.
Video segmentation using Maximum Entropy Model
QIN Li-juan; ZHUANG Yue-ting; PAN Yun-he; WU Fei
2005-01-01
Detecting objects of interest from a video sequence is a fundamental and critical task in automated visual surveillance.Most current approaches only focus on discriminating moving objects by background subtraction whether or not the objects of interest can be moving or stationary. In this paper, we propose layers segmentation to detect both moving and stationary target objects from surveillance video. We extend the Maximum Entropy (ME) statistical model to segment layers with features, which are collected by constructing a codebook with a set of codewords for each pixel. We also indicate how the training models are used for the discrimination of target objects in surveillance video. Our experimental results are presented in terms of the success rate and the segmenting precision.
Maximum Power Point Tracking of Photovoltaic System Using Intelligent Controller
Swathy C.S
2013-04-01
Full Text Available Photovoltaic systems normally use a maximum power point tracking (MPPT technique to continuously give forth the highest probable power to the load when the temperature and solar irradiationchanges occur. This subdues the problem of mismatch between the given load and the solar array. The energy conservation principle is used to obtain small signal model and transfer function. A simulationwork handling with MPPT controller, a DC/DC boost converter feeding a load is achieved. PI controller and fuzzy logic controllers were used as the MPPT controller, which controls the dc/dc converter. Simulations and experimental results showed excellent performance and were used for comparing PI controller and fuzzy logic controller.
Maximum Entropy Estimation of n-Year Extreme Waveheights
徐德伦; 张军; 郑桂珍
2004-01-01
A new method for estimating the n (50 or 100) -year return-period waveheight, namely, the extreme waveheightexpected to occur in n years, is presented on the basis of the maximum entropy principle. The main points of the method are as follows: ( 1 ) based on the Hamiltonian principle, a maximum entropy probability density function for the extreme waveheight H, f(H)= αHγe-βΗ4 is derived from a Lagrangian function subject to some necessary and rational constraints; (2) the parametersα,β, andγin the function are expressed in terms of the mean H, variance V = ( H - H)2and bias B = ( H- H)3; and (3) with H, V and B estimated from observed data, the n-year return-period wave height Hn is computed in accordance with the formula 1/1 - F(Hn) = n, where F(Hn) is defined as F(Hn) =n Hn Of(H)dH.Examples of estimating the 50 and 100-year retum period waveheights by the present method and by some currently used method from observed data acquired from two hydrographic stations are given. A comparison of the estimated results shows that the present method is superior to the others.
Forecasting ozone daily maximum levels at Santiago, Chile
Jorquera, Héctor; Pérez, Ricardo; Cipriano, Aldo; Espejo, Andrés; Victoria Letelier, M.; Acuña, Gonzalo
In major urban areas, air pollution impact on health is serious enough to include it in the group of meteorological variables that are forecast daily. This work focusses on the comparison of different forecasting systems for daily maximum ozone levels at Santiago, Chile. The modelling tools used for these systems were linear time series, artificial neural networks and fuzzy models. The structure of the forecasting model was derived from basic principles and it includes a combination of persistence and daily maximum air temperature as input variables. Assessment of the models is based on two indices: their ability to forecast well an episode, and their tendency to forecast an episode that did not occur at the end (a false positive). All the models tried in this work showed good forecasting performance, with 70-95% of successful forecasts at two monitor sites: Downtown (moderate impacts) and Eastern (downwind, highest impacts). The number of false positives was not negligible, but this may be improved by expressing the forecast in broad classes: low, average, high, very high impacts; the fuzzy model was the most reliable forecast, with the lowest number of false positives among the different models evaluated. The quality of the results and the dynamics of ozone formation suggest the use of a forecast to warn people about excessive exposure during episodic days at Santiago.
Radiation engineering of optical antennas for maximum field enhancement.
Seok, Tae Joon; Jamshidi, Arash; Kim, Myungki; Dhuey, Scott; Lakhani, Amit; Choo, Hyuck; Schuck, Peter James; Cabrini, Stefano; Schwartzberg, Adam M; Bokor, Jeffrey; Yablonovitch, Eli; Wu, Ming C
2011-07-13
Optical antennas have generated much interest in recent years due to their ability to focus optical energy beyond the diffraction limit, benefiting a broad range of applications such as sensitive photodetection, magnetic storage, and surface-enhanced Raman spectroscopy. To achieve the maximum field enhancement for an optical antenna, parameters such as the antenna dimensions, loading conditions, and coupling efficiency have been previously studied. Here, we present a framework, based on coupled-mode theory, to achieve maximum field enhancement in optical antennas through optimization of optical antennas' radiation characteristics. We demonstrate that the optimum condition is achieved when the radiation quality factor (Q(rad)) of optical antennas is matched to their absorption quality factor (Q(abs)). We achieve this condition experimentally by fabricating the optical antennas on a dielectric (SiO(2)) coated ground plane (metal substrate) and controlling the antenna radiation through optimizing the dielectric thickness. The dielectric thickness at which the matching condition occurs is approximately half of the quarter-wavelength thickness, typically used to achieve constructive interference, and leads to ∼20% higher field enhancement relative to a quarter-wavelength thick dielectric layer.
Maximum embryo absorbed dose from intravenous urography: interhospital variations
Damilakis, J.; Perisinakis, K. [University of Crete (Greece). Dept. of Medical Physics; Koukourakis, M. [University of Crete (Greece). Dept. of Radiology; Gourtsoyiannis, N. [University Hospital of Iraklion, Crete (Greece). Dept. of Radiotherapy
1997-12-01
The purpose of this study was to determine the maximum embryo dose during intravenous urography (IVU) examinations, when inadvertent irradiation of a pregnant woman occurs, and to investigate the variation of doses received from different institutions. Doses at average embryo depth from IVU examinations have been measured in four institutions using a Rando phantom and thermoluminescent crystals. In order to estimate the maximum range of embryo doses, radiologists were asked to carry out the examinations with the same technique as in female patients with acute ureteral obstruction. The range of doses estimated at embryo depth for the institutions participating in this study was 5.77 to 35.2 mGy. The considerable interhospital variation found in dose can be explained by different equipment and techniques used. A simple method of estimating embryo dose from pelvic radiographs reported previously was found to be also applicable to IVU examinations. Absorbed dose at 6 cm, the average embryo depth, was found significantly less than 50 mGy. (Author).
Ionization and maximum energy of nuclei in shock acceleration theory
Morlino, Giovanni
2011-01-01
We study the acceleration of heavy nuclei at SNR shocks when the process of ionization is taken into account. Heavy atoms ($Z_N >$ few) in the interstellar medium which start the diffusive shock acceleration (DSA) are never fully ionized at the moment of injection. The ionization occurs during the acceleration process, when atoms already move relativistically. For typical environment around SNRs the photo-ionization due to the background galactic radiation dominates over Coulomb collisions. The main consequence of ionization is the reduction of the maximum energy which ions can achieve with respect to the standard result of the DSA. In fact the photo-ionization has a timescale comparable to the beginning of the Sedov-Taylor phase, hence the maximum energy is no more proportional to the nuclear charge, as predicted by standard DSA, but rather to the effective ions' charge during the acceleration process, which is smaller than the total nuclear charge $Z_N$. This result can have a direct consequence in the pred...
Evaluation of pliers' grip spans in the maximum gripping task and sub-maximum cutting task.
Kim, Dae-Min; Kong, Yong-Ku
2016-12-01
A total of 25 males participated to investigate the effects of the grip spans of pliers on the total grip force, individual finger forces and muscle activities in the maximum gripping task and wire-cutting tasks. In the maximum gripping task, results showed that the 50-mm grip span had significantly higher total grip strength than the other grip spans. In the cutting task, the 50-mm grip span also showed significantly higher grip strength than the 65-mm and 80-mm grip spans, whereas the muscle activities showed a higher value at 80-mm grip span. The ratios of cutting force to maximum grip strength were also investigated. Ratios of 30.3%, 31.3% and 41.3% were obtained by grip spans of 50-mm, 65-mm, and 80-mm, respectively. Thus, the 50-mm grip span for pliers might be recommended to provide maximum exertion in gripping tasks, as well as lower maximum-cutting force ratios in the cutting tasks.
Cosmic shear measurement with maximum likelihood and maximum a posteriori inference
Hall, Alex
2016-01-01
We investigate the problem of noise bias in maximum likelihood and maximum a posteriori estimators for cosmic shear. We derive the leading and next-to-leading order biases and compute them in the context of galaxy ellipticity measurements, extending previous work on maximum likelihood inference for weak lensing. We show that a large part of the bias on these point estimators can be removed using information already contained in the likelihood when a galaxy model is specified, without the need for external calibration. We test these bias-corrected estimators on simulated galaxy images similar to those expected from planned space-based weak lensing surveys, with very promising results. We find that the introduction of an intrinsic shape prior mitigates noise bias, such that the maximum a posteriori estimate can be made less biased than the maximum likelihood estimate. Second-order terms offer a check on the convergence of the estimators, but are largely sub-dominant. We show how biases propagate to shear estima...
Does denitrification occur within porous carbonate sand grains?
P. L. M. Cook
2017-09-01
Full Text Available Permeable carbonate sands form a major habitat type on coral reefs and play a major role in organic matter recycling. Nitrogen cycling within these sediments is likely to play a major role in coral reef productivity, yet it remains poorly studied. Here, we used flow-through reactors and stirred reactors to quantify potential rates of denitrification and the dependence of denitrification on oxygen concentrations in permeable carbonate sands at three sites on Heron Island, Australia. Our results showed that potential rates of denitrification fell within the range of 2–28 µmol L−1 sediment h−1 and were very low compared to oxygen consumption rates, consistent with previous studies of silicate sands. Denitrification was observed to commence at porewater oxygen concentrations as high as 50 µM in stirred reactor experiments on the coarse sediment fraction (2–10 mm and at oxygen concentrations of 10–20 µM in flow-through and stirred reactor experiments at a site with a median sediment grain size of 0.9 mm. No denitrification was detected in sediments under oxic conditions from another site with finer sediment (median grain size: 0.7 mm. We interpret these results as confirmation that denitrification may occur within anoxic microniches present within porous carbonate sand grains. The occurrence of such microniches has the potential to enhance denitrification rates within carbonate sediments; however further work is required to elucidate the extent and ecological significance of this effect.
Modelling the maximum voluntary joint torque/angular velocity relationship in human movement.
Yeadon, Maurice R; King, Mark A; Wilson, Cassie
2006-01-01
The force exerted by a muscle is a function of the activation level and the maximum (tetanic) muscle force. In "maximum" voluntary knee extensions muscle activation is lower for eccentric muscle velocities than for concentric velocities. The aim of this study was to model this "differential activation" in order to calculate the maximum voluntary knee extensor torque as a function of knee angular velocity. Torque data were collected on two subjects during maximal eccentric-concentric knee extensions using an isovelocity dynamometer with crank angular velocities ranging from 50 to 450 degrees s(-1). The theoretical tetanic torque/angular velocity relationship was modelled using a four parameter function comprising two rectangular hyperbolas while the activation/angular velocity relationship was modelled using a three parameter function that rose from submaximal activation for eccentric velocities to full activation for high concentric velocities. The product of these two functions gave a seven parameter function which was fitted to the joint torque/angular velocity data, giving unbiased root mean square differences of 1.9% and 3.3% of the maximum torques achieved. Differential activation accounts for the non-hyperbolic behaviour of the torque/angular velocity data for low concentric velocities. The maximum voluntary knee extensor torque that can be exerted may be modelled accurately as the product of functions defining the maximum torque and the maximum voluntary activation level. Failure to include differential activation considerations when modelling maximal movements will lead to errors in the estimation of joint torque in the eccentric phase and low velocity concentric phase.
An Integrated Modeling Framework for Probable Maximum Precipitation and Flood
Gangrade, S.; Rastogi, D.; Kao, S. C.; Ashfaq, M.; Naz, B. S.; Kabela, E.; Anantharaj, V. G.; Singh, N.; Preston, B. L.; Mei, R.
2015-12-01
With the increasing frequency and magnitude of extreme precipitation and flood events projected in the future climate, there is a strong need to enhance our modeling capabilities to assess the potential risks on critical energy-water infrastructures such as major dams and nuclear power plants. In this study, an integrated modeling framework is developed through high performance computing to investigate the climate change effects on probable maximum precipitation (PMP) and probable maximum flood (PMF). Multiple historical storms from 1981-2012 over the Alabama-Coosa-Tallapoosa River Basin near the Atlanta metropolitan area are simulated by the Weather Research and Forecasting (WRF) model using the Climate Forecast System Reanalysis (CFSR) forcings. After further WRF model tuning, these storms are used to simulate PMP through moisture maximization at initial and lateral boundaries. A high resolution hydrological model, Distributed Hydrology-Soil-Vegetation Model, implemented at 90m resolution and calibrated by the U.S. Geological Survey streamflow observations, is then used to simulate the corresponding PMF. In addition to the control simulation that is driven by CFSR, multiple storms from the Community Climate System Model version 4 under the Representative Concentrations Pathway 8.5 emission scenario are used to simulate PMP and PMF in the projected future climate conditions. The multiple PMF scenarios developed through this integrated modeling framework may be utilized to evaluate the vulnerability of existing energy-water infrastructures with various aspects associated PMP and PMF.
Iammarino, Marco; Di Taranto, Aurelia; Muscarella, Marilena
2012-02-01
Sulphiting agents are commonly used food additives. They are not allowed in fresh meat preparations. In this work, 2250 fresh meat samples were analysed to establish the maximum concentration of sulphites that can be considered as "natural" and therefore be admitted in fresh meat preparations. The analyses were carried out by an optimised Monier-Williams Method and the positive samples confirmed by ion chromatography. Sulphite concentrations higher than the screening method LOQ (10.0 mg · kg(-1)) were found in 100 samples. Concentrations higher than 76.6 mg · kg(-1), attributable to sulphiting agent addition, were registered in 40 samples. Concentrations lower than 41.3 mg · kg(-1) were registered in 60 samples. Taking into account the distribution of sulphite concentrations obtained, it is plausible to estimate a maximum allowable limit of 40.0 mg · kg(-1) (expressed as SO(2)). Below this value the samples can be considered as "compliant".
Analytical maximum likelihood estimation of stellar magnetic fields
González, M J Martínez; Ramos, A Asensio; Belluzzi, L
2011-01-01
The polarised spectrum of stellar radiation encodes valuable information on the conditions of stellar atmospheres and the magnetic fields that permeate them. In this paper, we give explicit expressions to estimate the magnetic field vector and its associated error from the observed Stokes parameters. We study the solar case where specific intensities are observed and then the stellar case, where we receive the polarised flux. In this second case, we concentrate on the explicit expression for the case of a slow rotator with a dipolar magnetic field geometry. Moreover, we also give explicit formulae to retrieve the magnetic field vector from the LSD profiles without assuming mean values for the LSD artificial spectral line. The formulae have been obtained assuming that the spectral lines can be described in the weak field regime and using a maximum likelihood approach. The errors are recovered by means of the hermitian matrix. The bias of the estimators are analysed in depth.
R.A. Onoja
2014-04-01
Full Text Available In order to determine the natural radionuclides in portable water, samples were collected from fifty locations in Northern part of Kaduna state and were subjected to the investigation of the presence of naturally occurring radionuclides. The radionuclides investigated are potassium-40, uranium-238 and thorium-232 using sodium iodide detector (NaI (Ti. Results showed that potassium-40 concentration in the water samples has minimum and maximum concentration as 0.124 and 0.849 Bq/L, respectively. The mean value of potassium-40 concentration found in water is 0.416 Bq/L. Also, uranium-238 and thorium-232 investigated in the samples gave mean concentration of 0.0011 and 0.00006 Bq/L, respectively. The results obtained from these analysis shows that samples have radionuclides activity concentration below the recommended value for the radionuclides.
20 CFR 211.14 - Maximum creditable compensation.
2010-04-01
... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Maximum creditable compensation. 211.14... CREDITABLE RAILROAD COMPENSATION § 211.14 Maximum creditable compensation. Maximum creditable compensation... Employment Accounts shall notify each employer of the amount of maximum creditable compensation applicable...
49 CFR 230.24 - Maximum allowable stress.
2010-10-01
... 49 Transportation 4 2010-10-01 2010-10-01 false Maximum allowable stress. 230.24 Section 230.24... Allowable Stress § 230.24 Maximum allowable stress. (a) Maximum allowable stress value. The maximum allowable stress value on any component of a steam locomotive boiler shall not exceed 1/4 of the ultimate...
Proposed principles of maximum local entropy production.
Ross, John; Corlan, Alexandru D; Müller, Stefan C
2012-07-12
Articles have appeared that rely on the application of some form of "maximum local entropy production principle" (MEPP). This is usually an optimization principle that is supposed to compensate for the lack of structural information and measurements about complex systems, even systems as complex and as little characterized as the whole biosphere or the atmosphere of the Earth or even of less known bodies in the solar system. We select a number of claims from a few well-known papers that advocate this principle and we show that they are in error with the help of simple examples of well-known chemical and physical systems. These erroneous interpretations can be attributed to ignoring well-established and verified theoretical results such as (1) entropy does not necessarily increase in nonisolated systems, such as "local" subsystems; (2) macroscopic systems, as described by classical physics, are in general intrinsically deterministic-there are no "choices" in their evolution to be selected by using supplementary principles; (3) macroscopic deterministic systems are predictable to the extent to which their state and structure is sufficiently well-known; usually they are not sufficiently known, and probabilistic methods need to be employed for their prediction; and (4) there is no causal relationship between the thermodynamic constraints and the kinetics of reaction systems. In conclusion, any predictions based on MEPP-like principles should not be considered scientifically founded.
Maximum entropy production and plant optimization theories.
Dewar, Roderick C
2010-05-12
Plant ecologists have proposed a variety of optimization theories to explain the adaptive behaviour and evolution of plants from the perspective of natural selection ('survival of the fittest'). Optimization theories identify some objective function--such as shoot or canopy photosynthesis, or growth rate--which is maximized with respect to one or more plant functional traits. However, the link between these objective functions and individual plant fitness is seldom quantified and there remains some uncertainty about the most appropriate choice of objective function to use. Here, plants are viewed from an alternative thermodynamic perspective, as members of a wider class of non-equilibrium systems for which maximum entropy production (MEP) has been proposed as a common theoretical principle. I show how MEP unifies different plant optimization theories that have been proposed previously on the basis of ad hoc measures of individual fitness--the different objective functions of these theories emerge as examples of entropy production on different spatio-temporal scales. The proposed statistical explanation of MEP, that states of MEP are by far the most probable ones, suggests a new and extended paradigm for biological evolution--'survival of the likeliest'--which applies from biomacromolecules to ecosystems, not just to individuals.
Maximum likelihood continuity mapping for fraud detection
Hogden, J.
1997-05-01
The author describes a novel time-series analysis technique called maximum likelihood continuity mapping (MALCOM), and focuses on one application of MALCOM: detecting fraud in medical insurance claims. Given a training data set composed of typical sequences, MALCOM creates a stochastic model of sequence generation, called a continuity map (CM). A CM maximizes the probability of sequences in the training set given the model constraints, CMs can be used to estimate the likelihood of sequences not found in the training set, enabling anomaly detection and sequence prediction--important aspects of data mining. Since MALCOM can be used on sequences of categorical data (e.g., sequences of words) as well as real valued data, MALCOM is also a potential replacement for database search tools such as N-gram analysis. In a recent experiment, MALCOM was used to evaluate the likelihood of patient medical histories, where ``medical history`` is used to mean the sequence of medical procedures performed on a patient. Physicians whose patients had anomalous medical histories (according to MALCOM) were evaluated for fraud by an independent agency. Of the small sample (12 physicians) that has been evaluated, 92% have been determined fraudulent or abusive. Despite the small sample, these results are encouraging.
Maximum life spiral bevel reduction design
Savage, M.; Prasanna, M. G.; Coe, H. H.
1992-07-01
Optimization is applied to the design of a spiral bevel gear reduction for maximum life at a given size. A modified feasible directions search algorithm permits a wide variety of inequality constraints and exact design requirements to be met with low sensitivity to initial values. Gear tooth bending strength and minimum contact ratio under load are included in the active constraints. The optimal design of the spiral bevel gear reduction includes the selection of bearing and shaft proportions in addition to gear mesh parameters. System life is maximized subject to a fixed back-cone distance of the spiral bevel gear set for a specified speed ratio, shaft angle, input torque, and power. Significant parameters in the design are: the spiral angle, the pressure angle, the numbers of teeth on the pinion and gear, and the location and size of the four support bearings. Interpolated polynomials expand the discrete bearing properties and proportions into continuous variables for gradient optimization. After finding the continuous optimum, a designer can analyze near optimal designs for comparison and selection. Design examples show the influence of the bearing lives on the gear parameters in the optimal configurations. For a fixed back-cone distance, optimal designs with larger shaft angles have larger service lives.
CORA - emission line fitting with Maximum Likelihood
Ness, J.-U.; Wichmann, R.
2002-07-01
The advent of pipeline-processed data both from space- and ground-based observatories often disposes of the need of full-fledged data reduction software with its associated steep learning curve. In many cases, a simple tool doing just one task, and doing it right, is all one wishes. In this spirit we introduce CORA, a line fitting tool based on the maximum likelihood technique, which has been developed for the analysis of emission line spectra with low count numbers and has successfully been used in several publications. CORA uses a rigorous application of Poisson statistics. From the assumption of Poissonian noise we derive the probability for a model of the emission line spectrum to represent the measured spectrum. The likelihood function is used as a criterion for optimizing the parameters of the theoretical spectrum and a fixed point equation is derived allowing an efficient way to obtain line fluxes. As an example we demonstrate the functionality of the program with an X-ray spectrum of Capella obtained with the Low Energy Transmission Grating Spectrometer (LETGS) on board the Chandra observatory and choose the analysis of the Ne IX triplet around 13.5 Å.
Finding maximum JPEG image block code size
Lakhani, Gopal
2012-07-01
We present a study of JPEG baseline coding. It aims to determine the minimum storage needed to buffer the JPEG Huffman code bits of 8-bit image blocks. Since DC is coded separately, and the encoder represents each AC coefficient by a pair of run-length/AC coefficient level, the net problem is to perform an efficient search for the optimal run-level pair sequence. We formulate it as a two-dimensional, nonlinear, integer programming problem and solve it using a branch-and-bound based search method. We derive two types of constraints to prune the search space. The first one is given as an upper-bound for the sum of squares of AC coefficients of a block, and it is used to discard sequences that cannot represent valid DCT blocks. The second type constraints are based on some interesting properties of the Huffman code table, and these are used to prune sequences that cannot be part of optimal solutions. Our main result is that if the default JPEG compression setting is used, space of minimum of 346 bits and maximum of 433 bits is sufficient to buffer the AC code bits of 8-bit image blocks. Our implementation also pruned the search space extremely well; the first constraint reduced the initial search space of 4 nodes down to less than 2 nodes, and the second set of constraints reduced it further by 97.8%.
Maximum likelihood estimates of pairwise rearrangement distances.
Serdoz, Stuart; Egri-Nagy, Attila; Sumner, Jeremy; Holland, Barbara R; Jarvis, Peter D; Tanaka, Mark M; Francis, Andrew R
2017-06-21
Accurate estimation of evolutionary distances between taxa is important for many phylogenetic reconstruction methods. Distances can be estimated using a range of different evolutionary models, from single nucleotide polymorphisms to large-scale genome rearrangements. Corresponding corrections for genome rearrangement distances fall into 3 categories: Empirical computational studies, Bayesian/MCMC approaches, and combinatorial approaches. Here, we introduce a maximum likelihood estimator for the inversion distance between a pair of genomes, using a group-theoretic approach to modelling inversions introduced recently. This MLE functions as a corrected distance: in particular, we show that because of the way sequences of inversions interact with each other, it is quite possible for minimal distance and MLE distance to differently order the distances of two genomes from a third. The second aspect tackles the problem of accounting for the symmetries of circular arrangements. While, generally, a frame of reference is locked, and all computation made accordingly, this work incorporates the action of the dihedral group so that distance estimates are free from any a priori frame of reference. The philosophy of accounting for symmetries can be applied to any existing correction method, for which examples are offered. Copyright © 2017 Elsevier Ltd. All rights reserved.
Boudechiche, S.; Hall, S. [University of Nottingham, Nottingham (United Kingdom)
1995-06-01
The desire for higher quality coal products in froth flotation has led to the introduction of a number of novel flotation techniques, including flotation columns, but the benefits of each in relation to the source of the slurry must be evaluated before plant is installed. It was to assess on a laboratory scale the quality of coal flotation concentrates from column flotation of fine coal (-500{mu}m) as an alternative to the traditional conventional agitated cell that this work was carried out. The column developed specifically for this purpose allowed the establishment of an approach to the examination of the flotation response of samples of UK coals (originating from Bolsover, Derbyshies; Rawdon, Leicestershire; and Bilsthorpe, Nottinghamshire). The work indicates the importance of the origin of the feed slurry, since each type of coal exhibits a different flotation response. The observations from the results described in this paper enable an assessment to be made of the merits of column flotation in fine coal treatment. 11 refs., 4 figs., 5 tabs.
X. Gong
2014-06-01
Full Text Available A bell-shape vertical profile of chlorophyll a (Chl a concentration, conventionally referred as Subsurface Chlorophyll Maximum (SCM phenomenon, has frequently been observed in stratified oceans and lakes. This profile is assumed to be a general Gaussian distribution in this study. By substituting the general Gaussian function into ecosystem dynamical equations, the steady-state solutions for SCM characteristics (i.e. SCM layer depth, thickness, and intensity in various scenarios are derived. These solutions indicate that: (1 The maximum in Chl a concentrations occurs at or below the depth with the maximum in growth rates of phytoplankton locating at the transition from nutrient limitation to light limitation, and the depth of SCM layer deepens logarithmically with an increase in surface light intensity; (2 The shape of SCM layer (thickness and intensity is mainly influenced by nutrient supply, but independence of surface light intensity; (3 The intensity of SCM layer is proportional to the diffusive flux of nutrient from below, getting stronger as a result of this layer being shrank by a higher light attenuation coefficient or a larger sinking velocity of phytoplankton. The analytical solutions can be useful to estimate environmental parameters difficultly obtained from on-site observations.
A comparison of substorms occurring during magnetic storms with those occurring during quiet times
McPherron, R. L.; Hsu, T.-S.
2002-09-01
It has been suggested that there may be a fundamental difference between substorms that occur during magnetic storms and those that occur at other times. [1996] presented evidence that there is no obvious change in lobe field in "quiet time" substorms but that "storm time" substorms exhibit the classic pattern of storage and release of lobe field energy. This result led them to speculate that the former are caused by current sheet disruption, while the latter are caused by reconnection of lobe flux. In this paper we examine their hypothesis with a much larger data set using definitions of the two types of substorms similar to theirs, as well as additional more restrictive definitions of these classes of events. Our results show that the only differences between the various classes are the absolute value of the lobe field and the size of the changes. When the data are normalized to unit field amplitude, we find that the percent change during storm time and non-storm time substorms is nearly the same. The above conclusions are demonstrated with superposed epoch analysis of lobe field (Bt and Bz) for four classes of substorms: active times (Dst -25 nT), and quiet time substorms (no evidence of storm in Dst). Epoch zero for the analysis was taken as the main substorm onset (Pi2 onset closest to sharp break in AL index). Our results suggest that there is no qualitative distinction between the various classes of substorms, and so they are all likely to be caused by the same mechanism.
Maximum work configurations of finite potential capacity reservoir chemical engines
无
2010-01-01
An isothermal endoreversible chemical engine operating between the finite potential capacity high-chemical-potential reservoir and the infinite potential capacity low-chemical-potential reservoir has been studied in this work.Optimal control theory was applied to determine the optimal cycle configurations corresponding to the maximum work output per cycle for the fixed total cycle time and a universal mass transfer law.Analyses of special examples showed that the optimal cycle configuration with the mass transfer law g∝△μ,where△μis the chemical potential difference,is an isothermal endoreversible chemical engine cycle,in which the chemical potential(or the concentration) of the key component in the working substance of low-chemical-potential side is a constant,while the chemical potentials(or the concentrations) of the key component in the finite potential capacity high-chemical-potential reservoir and the corresponding side working substance change nonlinearly with time,and the difference of the chemical potentials(or the ratio of the concentrations) of the key component between the high-chemical-potential reservoir and the working substance is a constant.While the optimal cycle configuration with the mass transfer law g∝△μc,where △μc is the concentration difference,is different from that with the mass transfer law g∝△μ significantly.When the high-chemical-potential reservoir is also an infinite potential capacity chemical potential reservoir,the optimal cycle configuration of the isothermal endoreversible chemical engine consists of two constant chemical potential branches and two instantaneous constant mass-flux branches,which is independent of the mass transfer law.The object studied in this paper is general,and the results can provide some guidelines for optimal design and operation of real chemical engines.
Boedeker, Peter
2017-01-01
Hierarchical linear modeling (HLM) is a useful tool when analyzing data collected from groups. There are many decisions to be made when constructing and estimating a model in HLM including which estimation technique to use. Three of the estimation techniques available when analyzing data with HLM are maximum likelihood, restricted maximum…
Baks, T.; Janssen, A.E.M.; Boom, R.M.
2006-01-01
The effect of the presence of several small carbohydrates on the measurement of the -amylase activity was determined over a broad concentration range. At low carbohydrate concentrations, a distinct maximum in the -amylase activity versus concentration curves was observed in several cases. At higher
Carbon Concentration of Austenite
Z. Ławrynowicz
2007-07-01
Full Text Available The investigation was carried out to examine the influence of temperature and times of austempering process on the maximum extend towhich the bainite reaction can proceed and the carbon content in retained austenite. It should be noted that a small percentage change in theaustenite carbon content can have a significant effect on the subsequent austempering reaction changing the volume fraction of the phasespresent and hence, the resulting mechanical properties. Specimens were prepared from an unalloyed ductile cast iron, austenitised at 950oCfor 60 minutes and austempered by the conventional single-step austempering process at four temperatures between BS and MS, eg., 250,300, 350 and 400oC. The samples were austempered at these temperatures for 15, 30, 60, 120 and 240 minutes and finally quenched toambient temperature. Volume fractions of retained austenite and carbon concentration in the residual austenite have been observed byusing X-ray diffraction. Additionally, carbon concentration in the residual austenite was calculated using volume fraction data of austeniteand a model developed by Bhadeshia based on the McLellan and Dunn quasi-chemical thermodynamic model. The comparison ofexperimental data with the T0, T0' and Ae3' phase boundaries suggests the likely mechanism of bainite reaction in cast iron is displacive rather than diffusional. The carbon concentration in retained austenite demonstrates that at the end of bainite reaction the microstructure must consist of not only ausferrite but additionally precipitated carbides.
Maximum likelihood molecular clock comb: analytic solutions.
Chor, Benny; Khetan, Amit; Snir, Sagi
2006-04-01
Maximum likelihood (ML) is increasingly used as an optimality criterion for selecting evolutionary trees, but finding the global optimum is a hard computational task. Because no general analytic solution is known, numeric techniques such as hill climbing or expectation maximization (EM), are used in order to find optimal parameters for a given tree. So far, analytic solutions were derived only for the simplest model--three taxa, two state characters, under a molecular clock. Four taxa rooted trees have two topologies--the fork (two subtrees with two leaves each) and the comb (one subtree with three leaves, the other with a single leaf). In a previous work, we devised a closed form analytic solution for the ML molecular clock fork. In this work, we extend the state of the art in the area of analytic solutions ML trees to the family of all four taxa trees under the molecular clock assumption. The change from the fork topology to the comb incurs a major increase in the complexity of the underlying algebraic system and requires novel techniques and approaches. We combine the ultrametric properties of molecular clock trees with the Hadamard conjugation to derive a number of topology dependent identities. Employing these identities, we substantially simplify the system of polynomial equations. We finally use tools from algebraic geometry (e.g., Gröbner bases, ideal saturation, resultants) and employ symbolic algebra software to obtain analytic solutions for the comb. We show that in contrast to the fork, the comb has no closed form solutions (expressed by radicals in the input data). In general, four taxa trees can have multiple ML points. In contrast, we can now prove that under the molecular clock assumption, the comb has a unique (local and global) ML point. (Such uniqueness was previously shown for the fork.).
Shape Modelling Using Maximum Autocorrelation Factors
Larsen, Rasmus
2001-01-01
of the training set are in reality a time series, e.g.\\$\\backslash\\$ snapshots of a beating heart during the cardiac cycle or when the shapes are slices of a 3D structure, e.g. the spinal cord. Second, in almost all applications a natural order of the landmark points along the contour of the shape is introduced......This paper addresses the problems of generating a low dimensional representation of the shape variation present in a training set after alignment using Procrustes analysis and projection into shape tangent space. We will extend the use of principal components analysis in the original formulation...... of Active Shape Models by Timothy Cootes and Christopher Taylor by building new information into the model. This new information consists of two types of prior knowledge. First, in many situation we will be given an ordering of the shapes of the training set. This situation occurs when the shapes...
Zhu, Zhilin; Sun, Xiaomin; Zhao, Fenghua; Meixner, Franz X
2015-08-01
Ozone (O3) concentration and flux (Fo) were measured using the eddy covariance technique over a wheat field in the Northwest-Shandong Plain of China. The O3-induced wheat yield loss was estimated by utilizing O3 exposure-response models. The results showed that: (1) During the growing season (7 March to 7 June, 2012), the minimum (16.1 ppbV) and maximum (53.3 ppbV) mean O3 concentrations occurred at approximately 6:30 and 16:00, respectively. The mean and maximum of all measured O3 concentrations were 31.3 and 128.4 ppbV, respectively. The variation of O3 concentration was mainly affected by solar radiation and temperature. (2) The mean diurnal variation of deposition velocity (Vd) can be divided into four phases, and the maximum occurred at noon (12:00). Averaged Vd during daytime (6:00-18:00) and nighttime (18:00-6:00) were 0.42 and 0.14 cm/sec, respectively. The maximum of measured Vd was about 1.5 cm/sec. The magnitude of Vd was influenced by the wheat growing stage, and its variation was significantly correlated with both global radiation and friction velocity. (3) The maximum mean Fo appeared at 14:00, and the maximum measured Fo was -33.5 nmol/(m(2)·sec). Averaged Fo during daytime and nighttime were -6.9 and -1.5 nmol/(m(2)·sec), respectively. (4) Using O3 exposure-response functions obtained from the USA, Europe, and China, the O3-induced wheat yield reduction in the district was estimated as 12.9% on average (5.5%-23.3%). Large uncertainties were related to the statistical methods and environmental conditions involved in deriving the exposure-response functions.
Metamaterial anisotropic flux concentrators and magnetic arrays
Bjørk, R; Bahl, C R H
2014-01-01
A metamaterial magnetic flux concentrator is investigated in detail in combination with a Halbach cylinder of infinite length. A general analytical solution to the field is determined and the magnetic figure of merit is determined for a Halbach cylinder with a flux concentrator. It is shown that an ideal flux concentrator will not change the figure of merit of a given magnet design, while the non-ideal will always lower it. The geometric parameters producing maximum figure of merit, i.e. the most efficient devices, are determined. The force and torque between two concentric Halbach cylinders with flux concentrators is determined and the maximum torque is found. Finally, the effect of non-ideal flux concentrators and the practical use of flux concentrators, as well as demagnetization issues, is discussed.
The Prediction of Maximum Amplitudes of Solar Cycles and the Maximum Amplitude of Solar Cycle 24
无
2002-01-01
We present a brief review of predictions of solar cycle maximum ampli-tude with a lead time of 2 years or more. It is pointed out that a precise predictionof the maximum amplitude with such a lead-time is still an open question despiteprogress made since the 1960s. A method of prediction using statistical character-istics of solar cycles is developed: the solar cycles are divided into two groups, ahigh rising velocity (HRV) group and a low rising velocity (LRV) group, dependingon the rising velocity in the ascending phase for a given duration of the ascendingphase. The amplitude of Solar Cycle 24 can be predicted after the start of thecycle using the formula derived in this paper. Now, about 5 years before the startof the cycle, we can make a preliminary prediction of 83.2-119.4 for its maximumamplitude.
The Change in the Maximum Wind Speed and the Impact of it on Agricultural Production
WU Jian-mei; SUN Jin-sen; SUI Gui-ling; XIE Su-he; WANG Meng
2012-01-01
Using the data on the maximum wind speed within ten minutes every month in the period 1971-2009 in Zhucheng City of Shandong Province, we conduct statistical analysis of the maximum wind speed in Zhucheng City. The results show that over thirty-nine years, the annual maximum wind speed in four seasons in Zhucheng City tends to decline. The annual maximum wind speed declines at the rate of 1.45 m/s every 10 years. It falls fastest in winter, with decline rate of 1.73 m/s every 10 years; it is close to the average annual maximum wind speed in spring and autumn, with decline rate of 1.44 m/s and 14.8 m/s every 10 years, respectively; it falls slowest in summer, and the extreme value of the maximum wind speed occurs mainly in spring. The curve of changes in the monthly maximum wind speed in Zhucheng City assumes diminishing shape of "two peaks and one trough". We conduct preliminary analysis of the windy weather situation, and put forth specific defensive measures against the hazards of strong winds in the different periods.
Needs to Update Probable Maximum Precipitation for Critical Infrastructure
Pathak, C. S.; England, J. F.
2015-12-01
Probable Maximum Precipitation (PMP) is theoretically the greatest depth of precipitation for a given duration that is physically possible over a given size storm area at a particular geographical location at a certain time of the year. It is used to develop inflow flood hydrographs, known as Probable Maximum Flood (PMF), as design standard for high-risk flood-hazard structures, such as dams and nuclear power plants. PMP estimation methodology was developed in the 1930s and 40s when many dams were constructed in the US. The procedures to estimate PMP were later standardized by the World Meteorological Organization (WMO) in 1973 and revised in 1986.In the US, PMP estimates were published in a series of Hydrometeorological Reports (e.g., HMR55A, HMR57, and HMR58/59) by the National Weather Service since 1950s. In these reports, storm data up to 1980s were used to establish the current PMP estimates. Since that time, we have acquired additional meteorological data for 30 to 40 years, including newly available radar and satellite based precipitation data. These data sets are expected to have improved data quality and availability in both time and space. In addition, significant numbers of extreme storms have occurred and selected numbers of these events were even close to or exceeding the current PMP estimates, in some cases. In the last 50 years, climate science has progressed and scientists have better and improved understanding of atmospheric physics of extreme storms. However, applied research in estimation of PMP has been lagging behind. Alternative methods, such as atmospheric numerical modeling, should be investigated for estimating PMP and associated uncertainties. It would be highly desirable if regional atmospheric numerical models could be utilized in the estimation of PMP and their uncertainties, in addition to methods used to originally develop PMP index maps in the existing hydrometeorological reports.
Pattern formation, logistics, and maximum path probability
Kirkaldy, J. S.
1985-05-01
The concept of pattern formation, which to current researchers is a synonym for self-organization, carries the connotation of deductive logic together with the process of spontaneous inference. Defining a pattern as an equivalence relation on a set of thermodynamic objects, we establish that a large class of irreversible pattern-forming systems, evolving along idealized quasisteady paths, approaches the stable steady state as a mapping upon the formal deductive imperatives of a propositional function calculus. In the preamble the classical reversible thermodynamics of composite systems is analyzed as an externally manipulated system of space partitioning and classification based on ideal enclosures and diaphragms. The diaphragms have discrete classification capabilities which are designated in relation to conserved quantities by descriptors such as impervious, diathermal, and adiabatic. Differentiability in the continuum thermodynamic calculus is invoked as equivalent to analyticity and consistency in the underlying class or sentential calculus. The seat of inference, however, rests with the thermodynamicist. In the transition to an irreversible pattern-forming system the defined nature of the composite reservoirs remains, but a given diaphragm is replaced by a pattern-forming system which by its nature is a spontaneously evolving volume partitioner and classifier of invariants. The seat of volition or inference for the classification system is thus transferred from the experimenter or theoretician to the diaphragm, and with it the full deductive facility. The equivalence relations or partitions associated with the emerging patterns may thus be associated with theorems of the natural pattern-forming calculus. The entropy function, together with its derivatives, is the vehicle which relates the logistics of reservoirs and diaphragms to the analog logistics of the continuum. Maximum path probability or second-order differentiability of the entropy in isolation are
Cardiorespiratory Fitness of Inmates of a Maximum Security Prison ...
USER
Maximum Security Prison; and also to determine the effects of age, gender, and period of incarceration on CRF. A total of 247 apparently healthy inmates of Maiduguri Maximum Security ... with different types of cardiovascular and metabolic.
Maximum likelihood polynomial regression for robust speech recognition
LU Yong; WU Zhenyang
2011-01-01
The linear hypothesis is the main disadvantage of maximum likelihood linear re- gression （MLLR）. This paper applies the polynomial regression method to model adaptation and establishes a nonlinear model adaptation algorithm using maximum likelihood polyno
A reconnaissance study of radon concentrations in Hamadan city, Iran
Gillmore, G. K.; Jabarivasal, N.
2010-04-01
This paper presents results of a reconnaissance study that used CR-39 alpha track-etch detectors to measure radon concentrations in dwellings in Hamadan, western Iran, significantly, built on permeable alluvial fan deposits. The indoor radon levels recorded varied from 4 (i.e. below the lower limit of detection for the method) to 364 Bq/m3 with a mean value of 108 Bq/m3 which is 2.5 times the average global population-weighted indoor radon concentration - these data augment the very few published studies on indoor radon levels in Iran. The maximum radon concentration in Hamadan occurs during the winter period (January to March) with lower concentrations during the autumn. The effective dose equivalent to the population in Hamadan is estimated from this study to be in the region of 2.7 mSv/y, which is above the guidelines for dose to a member of the public of 1 mSv/y suggested by the International Commission on Radiological Protection (ICRP) in 1993. This study supports other work in a number of countries that indicates such permeable "surficial" deposits as being of intermediate to high radon potential. In western Iran, the presence of hammered clay floors, the widespread presence of excavated qanats, the textural properties of surficial deposits and human behaviour intended to cope with winds are likely to be important factors influencing radon concentrations in older buildings.
A reconnaissance study of radon concentrations in Hamadan city, Iran
G. K. Gillmore
2010-04-01
Full Text Available This paper presents results of a reconnaissance study that used CR-39 alpha track-etch detectors to measure radon concentrations in dwellings in Hamadan, western Iran, significantly, built on permeable alluvial fan deposits. The indoor radon levels recorded varied from 4 (i.e. below the lower limit of detection for the method to 364 Bq/m^{3} with a mean value of 108 Bq/m^{3} which is 2.5 times the average global population-weighted indoor radon concentration – these data augment the very few published studies on indoor radon levels in Iran. The maximum radon concentration in Hamadan occurs during the winter period (January to March with lower concentrations during the autumn. The effective dose equivalent to the population in Hamadan is estimated from this study to be in the region of 2.7 mSv/y, which is above the guidelines for dose to a member of the public of 1 mSv/y suggested by the International Commission on Radiological Protection (ICRP in 1993. This study supports other work in a number of countries that indicates such permeable "surficial" deposits as being of intermediate to high radon potential. In western Iran, the presence of hammered clay floors, the widespread presence of excavated qanats, the textural properties of surficial deposits and human behaviour intended to cope with winds are likely to be important factors influencing radon concentrations in older buildings.
M. Mihelich
2014-11-01
Full Text Available We derive rigorous results on the link between the principle of maximum entropy production and the principle of maximum Kolmogorov–Sinai entropy using a Markov model of the passive scalar diffusion called the Zero Range Process. We show analytically that both the entropy production and the Kolmogorov–Sinai entropy seen as functions of f admit a unique maximum denoted fmaxEP and fmaxKS. The behavior of these two maxima is explored as a function of the system disequilibrium and the system resolution N. The main result of this article is that fmaxEP and fmaxKS have the same Taylor expansion at first order in the deviation of equilibrium. We find that fmaxEP hardly depends on N whereas fmaxKS depends strongly on N. In particular, for a fixed difference of potential between the reservoirs, fmaxEP(N tends towards a non-zero value, while fmaxKS(N tends to 0 when N goes to infinity. For values of N typical of that adopted by Paltridge and climatologists (N ≈ 10 ~ 100, we show that fmaxEP and fmaxKS coincide even far from equilibrium. Finally, we show that one can find an optimal resolution N* such that fmaxEP and fmaxKS coincide, at least up to a second order parameter proportional to the non-equilibrium fluxes imposed to the boundaries. We find that the optimal resolution N* depends on the non equilibrium fluxes, so that deeper convection should be represented on finer grids. This result points to the inadequacy of using a single grid for representing convection in climate and weather models. Moreover, the application of this principle to passive scalar transport parametrization is therefore expected to provide both the value of the optimal flux, and of the optimal number of degrees of freedom (resolution to describe the system.
20 CFR 617.14 - Maximum amount of TRA.
2010-04-01
... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Maximum amount of TRA. 617.14 Section 617.14... FOR WORKERS UNDER THE TRADE ACT OF 1974 Trade Readjustment Allowances (TRA) § 617.14 Maximum amount of TRA. (a) General rule. Except as provided under paragraph (b) of this section, the maximum amount of...
40 CFR 94.107 - Determination of maximum test speed.
2010-07-01
... specified in 40 CFR 1065.510. These data points form the lug curve. It is not necessary to generate the... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Determination of maximum test speed... Determination of maximum test speed. (a) Overview. This section specifies how to determine maximum test...
14 CFR 25.1505 - Maximum operating limit speed.
2010-01-01
... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Maximum operating limit speed. 25.1505... Operating Limitations § 25.1505 Maximum operating limit speed. The maximum operating limit speed (V MO/M MO airspeed or Mach Number, whichever is critical at a particular altitude) is a speed that may not...
Maximum Performance Tests in Children with Developmental Spastic Dysarthria.
Wit, J.; And Others
1993-01-01
Three Maximum Performance Tasks (Maximum Sound Prolongation, Fundamental Frequency Range, and Maximum Repetition Rate) were administered to 11 children (ages 6-11) with spastic dysarthria resulting from cerebral palsy and 11 controls. Despite intrasubject and intersubject variability in normal and pathological speakers, the tasks were found to be…
Maximum physical capacity testing in cancer patients undergoing chemotherapy
Knutsen, L.; Quist, M; Midtgaard, J
2006-01-01
BACKGROUND: Over the past few years there has been a growing interest in the field of physical exercise in rehabilitation of cancer patients, leading to requirements for objective maximum physical capacity measurement (maximum oxygen uptake (VO(2max)) and one-repetition maximum (1RM)) to determine...
Leaf Dynamics of Panicum maximum under Future Climatic Changes.
Carlos Henrique Britto de Assis Prado
Full Text Available Panicum maximum Jacq. 'Mombaça' (C4 was grown in field conditions with sufficient water and nutrients to examine the effects of warming and elevated CO2 concentrations during the winter. Plants were exposed to either the ambient temperature and regular atmospheric CO2 (Control; elevated CO2 (600 ppm, eC; canopy warming (+2°C above regular canopy temperature, eT; or elevated CO2 and canopy warming (eC+eT. The temperatures and CO2 in the field were controlled by temperature free-air controlled enhancement (T-FACE and mini free-air CO2 enrichment (miniFACE facilities. The most green, expanding, and expanded leaves and the highest leaf appearance rate (LAR, leaves day(-1 and leaf elongation rate (LER, cm day(-1 were observed under eT. Leaf area and leaf biomass were higher in the eT and eC+eT treatments. The higher LER and LAR without significant differences in the number of senescent leaves could explain why tillers had higher foliage area and leaf biomass in the eT treatment. The eC treatment had the lowest LER and the fewest expanded and green leaves, similar to Control. The inhibitory effect of eC on foliage development in winter was indicated by the fewer green, expanded, and expanding leaves under eC+eT than eT. The stimulatory and inhibitory effects of the eT and eC treatments, respectively, on foliage raised and lowered, respectively, the foliar nitrogen concentration. The inhibition of foliage by eC was confirmed by the eC treatment having the lowest leaf/stem biomass ratio and by the change in leaf biomass-area relationships from linear or exponential growth to rectangular hyperbolic growth under eC. Besides, eC+eT had a synergist effect, speeding up leaf maturation. Therefore, with sufficient water and nutrients in winter, the inhibitory effect of elevated CO2 on foliage could be partially offset by elevated temperatures and relatively high P. maximum foliage production could be achieved under future climatic change.
Leaf Dynamics of Panicum maximum under Future Climatic Changes.
Britto de Assis Prado, Carlos Henrique; Haik Guedes de Camargo-Bortolin, Lívia; Castro, Érique; Martinez, Carlos Alberto
2016-01-01
Panicum maximum Jacq. 'Mombaça' (C4) was grown in field conditions with sufficient water and nutrients to examine the effects of warming and elevated CO2 concentrations during the winter. Plants were exposed to either the ambient temperature and regular atmospheric CO2 (Control); elevated CO2 (600 ppm, eC); canopy warming (+2°C above regular canopy temperature, eT); or elevated CO2 and canopy warming (eC+eT). The temperatures and CO2 in the field were controlled by temperature free-air controlled enhancement (T-FACE) and mini free-air CO2 enrichment (miniFACE) facilities. The most green, expanding, and expanded leaves and the highest leaf appearance rate (LAR, leaves day(-1)) and leaf elongation rate (LER, cm day(-1)) were observed under eT. Leaf area and leaf biomass were higher in the eT and eC+eT treatments. The higher LER and LAR without significant differences in the number of senescent leaves could explain why tillers had higher foliage area and leaf biomass in the eT treatment. The eC treatment had the lowest LER and the fewest expanded and green leaves, similar to Control. The inhibitory effect of eC on foliage development in winter was indicated by the fewer green, expanded, and expanding leaves under eC+eT than eT. The stimulatory and inhibitory effects of the eT and eC treatments, respectively, on foliage raised and lowered, respectively, the foliar nitrogen concentration. The inhibition of foliage by eC was confirmed by the eC treatment having the lowest leaf/stem biomass ratio and by the change in leaf biomass-area relationships from linear or exponential growth to rectangular hyperbolic growth under eC. Besides, eC+eT had a synergist effect, speeding up leaf maturation. Therefore, with sufficient water and nutrients in winter, the inhibitory effect of elevated CO2 on foliage could be partially offset by elevated temperatures and relatively high P. maximum foliage production could be achieved under future climatic change.
Ostendorp, G
2015-04-01
In this study the drinking water of 212 small-scale water supplies, mainly situated in areas with intensive agriculture or fruit-growing, was analysed for uranium. The median uranium concentration amounted to 0.04 µg/lL, the 95(th) percentile was 2.5 µg/L. The maximum level was 14 µg/L. This sample exceeded the guideline value for uranium in drinking water. The uranium concentration in small-scale water supplies was found to be slightly higher than that in central water works in Schleswig-Holstein. Water containing more than 10 mg/L nitrate showed significantly higher uranium contents. The results indicate that the uranium burden in drinking water from small wells is mainly determined by geological factors. An additional anthropogenic effect of soil management cannot be excluded. Overall uranium concentrations were low and not causing health concerns. However, in specific cases higher concentrations may occur.
Doyi, Israel; Essumang, David Kofi; Dampare, Samuel; Glover, Eric Tetteh
Radiation is part of the natural environment: it is estimated that approximately 80 % of all human exposure comes from naturally occurring or background radiation. Certain extractive industries such as mining and oil logging have the potential to increase the risk of radiation exposure to the environment and humans by concentrating the quantities of naturally occurring radiation beyond normal background levels (Azeri-Chirag-Gunashli 2004).
Observed Abrupt Changes in Minimum and Maximum Temperatures in Jordan in the 20th Century
Mohammad M. samdi
2006-01-01
Full Text Available This study examines changes in annual and seasonal mean (minimum and maximum temperatures variations in Jordan during the 20th century. The analyses focus on the time series records at the Amman Airport Meteorological (AAM station. The occurrence of abrupt changes and trends were examined using cumulative sum charts (CUSUM and bootstrapping and the Mann-Kendall rank test. Statistically significant abrupt changes and trends have been detected. Major change points in the mean minimum (night-time and mean maximum (day-time temperatures occurred in 1957 and 1967, respectively. A minor change point in the annual mean maximum temperature also occurred in 1954, which is essential agreement with the detected change in minimum temperature. The analysis showed a significant warming trend after the years 1957 and 1967 for the minimum and maximum temperatures, respectively. The analysis of maximum temperatures shows a significant warming trend after the year 1967 for the summer season with a rate of temperature increase of 0.038°C/year. The analysis of minimum temperatures shows a significant warming trend after the year 1957 for all seasons. Temperature and rainfall data from other stations in the country have been considered and showed similar changes.
Committed effective dose from naturally occuring radionuclides in shellfish
Khandaker, Mayeen Uddin; Wahib, Norfadira Binti; Amin, Yusoff Mohd.; Bradley, D. A.
2013-07-01
Recognizing their importance in the average Malaysian daily diet, the radioactivity concentrations in mollusc- and crustacean-based food have been determined for key naturally occuring radionuclides. Fresh samples collected from various maritime locations around peninsular Malaysia have been processed using standard procedures; the radionuclide concentrations being determined using an HPGe γ-ray spectrometer. For molluscs, assuming secular equilibrium, the range of activities of 238U (226Ra), 232Th (228Ra) and 40K were found to be 3.28±0.35 to 5.34±0.52, 1.20±0.21 to 2.44±0.21 and 118±6 to 281±14 Bq kg-1 dry weight, respectively. The respective values for crustaceans were 3.02±0.57 to 4.70±0.52, 1.38±0.21 to 2.40±0.35 and 216±11 to 316±15 Bq kg-1. The estimated average daily intake of radioactivity from consumption of molluscs are 0.37 Bq kg-1 for 238U (226Ra), 0.16 Bq kg-1 for 232Th (228Ra) and 18 Bq kg-1 for 40K; the respective daily intake values from crustaceans are 0.36 Bq kg-1, 0.16 Bq kg-1 and 23 Bq kg-1. Associated annual committed effective doses from molluscs are estimated to be in the range 21.3 to 34.7 μSv for 226Ra, 19.3 to 39.1 μSv for 228Ra and 17.0 to 40.4 μSv for 40K. For crustaceans, the respective dose ranges are 19.6 to 30.5 μSv, 22.0 to 38.4 μSv and 31.1 to 45.5 μSv, being some several times world average values.
Maximum covariance analysis to identify intraseasonal oscillations over tropical Brazil
Barreto, Naurinete J. C.; Mesquita, Michel d. S.; Mendes, David; Spyrides, Maria H. C.; Pedra, George U.; Lucio, Paulo S.
2017-09-01
A reliable prognosis of extreme precipitation events in the tropics is arguably challenging to obtain due to the interaction of meteorological systems at various time scales. A pivotal component of the global climate variability is the so-called intraseasonal oscillations, phenomena that occur between 20 and 100 days. The Madden-Julian Oscillation (MJO), which is directly related to the modulation of convective precipitation in the equatorial belt, is considered the primary oscillation in the tropical region. The aim of this study is to diagnose the connection between the MJO signal and the regional intraseasonal rainfall variability over tropical Brazil. This is achieved through the development of an index called Multivariate Intraseasonal Index for Tropical Brazil (MITB). This index is based on Maximum Covariance Analysis (MCA) applied to the filtered daily anomalies of rainfall data over tropical Brazil against a group of covariates consisting of: outgoing longwave radiation and the zonal component u of the wind at 850 and 200 hPa. The first two MCA modes, which were used to create the { MITB}_1 and { MITB}_2 indices, represent 65 and 16 % of the explained variance, respectively. The combined multivariate index was able to satisfactorily represent the pattern of intraseasonal variability over tropical Brazil, showing that there are periods of activation and inhibition of precipitation connected with the pattern of MJO propagation. The MITB index could potentially be used as a diagnostic tool for intraseasonal forecasting.
Berry, Vincent; Nicolas, François
2006-01-01
Given a set of evolutionary trees on a same set of taxa, the maximum agreement subtree problem (MAST), respectively, maximum compatible tree problem (MCT), consists of finding a largest subset of taxa such that all input trees restricted to these taxa are isomorphic, respectively compatible. These problems have several applications in phylogenetics such as the computation of a consensus of phylogenies obtained from different data sets, the identification of species subjected to horizontal gene transfers and, more recently, the inference of supertrees, e.g., Trees Of Life. We provide two linear time algorithms to check the isomorphism, respectively, compatibility, of a set of trees or otherwise identify a conflict between the trees with respect to the relative location of a small subset of taxa. Then, we use these algorithms as subroutines to solve MAST and MCT on rooted or unrooted trees of unbounded degree. More precisely, we give exact fixed-parameter tractable algorithms, whose running time is uniformly polynomial when the number of taxa on which the trees disagree is bounded. The improves on a known result for MAST and proves fixed-parameter tractability for MCT.
Inhibition of the Corrosion of Mild Steel in Acid Media by Naturally Occurring Acacia Senegal
Urvija Garg
2010-01-01
Full Text Available The inhibition of corrosion of mild steel in HCl solution by naturally occurring Acacia Senegal has been studied in relation to the concentration of inhibitor and concentration of corrosive medium. It has been observed that the Acacia Senegal alcoholic extract acts as a good corrosion inhibitor in hydrochloric acid solution and the adsorption of the extract provides a good protection against mild steel corrosion.
Antituberculosis Activity of a Naturally Occurring Flavonoid, Isorhamnetin.
Jnawali, Hum Nath; Jeon, Dasom; Jeong, Min-Cheol; Lee, Eunjung; Jin, Bongwhan; Ryoo, Sungweon; Yoo, Jungheon; Jung, In Duk; Lee, Seung Jun; Park, Yeong-Min; Kim, Yangmee
2016-04-22
Isorhamnetin (1) is a naturally occurring flavonoid having anticancer and anti-inflammatory properties. The present study demonstrated that 1 had antimycobacterial effects on Mycobacterium tuberculosis H37Rv, multi-drug- and extensively drug-resistant clinical isolates with minimum inhibitory concentrations of 158 and 316 μM, respectively. Mycobacteria mainly affect the lungs, causing an intense local inflammatory response that is critical to the pathogenesis of tuberculosis. We investigated the effects of 1 on interferon (IFN)-γ-stimulated human lung fibroblast MRC-5 cells. Isorhamnetin suppressed the release of tumor necrosis factor (TNF)-α and interleukin (IL)-12. A nontoxic dose of 1 reduced mRNA expression of TNF-α, IL-1β, IL-6, IL-12, and matrix metalloproteinase-1 in IFN-γ-stimulated cells. Isorhamnetin inhibited IFN-γ-mediated stimulation of extracellular signal-regulated kinase and p38 mitogen-activated protein kinase and showed high-affinity binding to these kinases (binding constants: 4.46 × 10(6) M(-1) and 7.6 × 10(6) M(-1), respectively). The 4'-hydroxy group and the 3'-methoxy group of the B-ring and the 5-hydroxy group of the A-ring of 1 play key roles in these binding interactions. A mouse in vivo study of lipopolysaccharide-induced lung inflammation revealed that a nontoxic dose of 1 reduced the levels of IL-1β, IL-6, IL-12, and INF-γ in lung tissue. These data provide the first evidence that 1 could be developed as a potent antituberculosis drug.
Phytotoxic activity of Serjania lethalis on the germination and growth of Panicum maximum
Viviane de Cassia Pereira
2014-03-01
Full Text Available This article analyzes the phytotoxic activity of aqueous extracts from young and mature leaves of Serjania lethalis A. St.-Hil. on the germination and growth of Panicum maximum Jacq. seeds. We prepared aqueous extracts at concentrations of 2.5, 5.0, 7.5, and 10% from dry leaves and distilled water. Germination percentage, germination speed, and synchronicity were negatively affected by both extracts. The extracts exhibited phytotoxicity and reduced seedlings’ growth, and these effects depend on concentration. The different extract concentrations caused significant changes in the germination process and the growth of P. maximum seedlings, in some cases varying due to leaf maturation stage, but they did not differ from each other for most variables under analysis.
Estuarine nitrification: A naturally occurring fluidized bed reaction?
Owens, N. J. P.
1986-01-01
The rates of nitrification in the water column of the Tamar river estuary, southwest England have been measured using the incorporation of H 14CO 3 in samples with and without the inhibitor of nitrification, 2-chloro-6-(trichloromethyl) pyridine ( N-Serve). N-Serve proved successful in totally inhibiting NH 4-oxidizing bacteria but the activity of NO 2-oxidizing bacteria was inhibited by only 30%; other organisms were only slightly affected. Measurements of the nitrification rate made over the entire salinity range of the estuary (0-30‰) showed that maximum nitrification always coincided with the turbidity maximum. The field data suggest that the organisms responsible for nitrification were associated with periodically resuspended particulate material and that the turbidity maximum acts in a manner similar to a fluidized bed reactor. A dispersion model has been used to demonstrate that nitrification in the water column can account for 100% of the NO 2 maximum which is apparent down estuary from the turbidity maximum.
Present and Last Glacial Maximum climates as states of maximum entropy production
Herbert, Corentin; Kageyama, Masa; Dubrulle, Berengere
2011-01-01
The Earth, like other planets with a relatively thick atmosphere, is not locally in radiative equilibrium and the transport of energy by the geophysical fluids (atmosphere and ocean) plays a fundamental role in determining its climate. Using simple energy-balance models, it was suggested a few decades ago that the meridional energy fluxes might follow a thermodynamic Maximum Entropy Production (MEP) principle. In the present study, we assess the MEP hypothesis in the framework of a minimal climate model based solely on a robust radiative scheme and the MEP principle, with no extra assumptions. Specifically, we show that by choosing an adequate radiative exchange formulation, the Net Exchange Formulation, a rigorous derivation of all the physical parameters can be performed. The MEP principle is also extended to surface energy fluxes, in addition to meridional energy fluxes. The climate model presented here is extremely fast, needs very little empirical data and does not rely on ad hoc parameterizations. We in...
Miyaguchi, Kazuyoshi; Demura, Shinichi
2008-11-01
This study aimed to examine the relationships between muscle power output using the stretch-shortening cycle (SSC) and eccentric maximum strength under elbow flexion. Eighteen young adult males pulled up a constant light load (2 kg) by ballistic elbow flexion under the following two preliminary conditions: 1) the static relaxed muscle state (SR condition), and 2) using the SSC with countermovement (SSC condition).Muscle power was determined from the product of the pulling velocity and the load mass by a power measurement instrument that adopted the weight-loading method. We assumed the pulling velocity to be the subject's muscle power parameters as a matter of convenience, because we used a constant load. The following two parameters were selected in reference to a previous study: 1) peak velocity (m x s(-1)) (peak power) and 2) 0.1-second velocity during concentric contraction (m x s(-1)) (initial power). Eccentric maximum strength by elbow flexion was measured by a handheld dynamometer.Initial power produced in the SSC condition was significantly larger than that in the SR condition. Eccentric maximum strength showed a significant and high correlation (r = 0.70) with peak power in the SSC condition but not in the SR condition. Eccentric maximum strength showed insignificant correlations with initial power in both conditions. In conclusion, it was suggested that eccentric maximum strength is associated with peak power in the SSC condition, but the contribution of the eccentric maximum strength to the SSC potentiation (initial power) may be low.
Understanding the Role of Reservoir Size on Probable Maximum Precipitation
Woldemichael, A. T.; Hossain, F.
2011-12-01
This study addresses the question 'Does surface area of an artificial reservoir matter in the estimation of probable maximum precipitation (PMP) for an impounded basin?' The motivation of the study was based on the notion that the stationarity assumption that is implicit in the PMP for dam design can be undermined in the post-dam era due to an enhancement of extreme precipitation patterns by an artificial reservoir. In addition, the study lays the foundation for use of regional atmospheric models as one way to perform life cycle assessment for planned or existing dams to formulate best management practices. The American River Watershed (ARW) with the Folsom dam at the confluence of the American River was selected as the study region and the Dec-Jan 1996-97 storm event was selected for the study period. The numerical atmospheric model used for the study was the Regional Atmospheric Modeling System (RAMS). First, the numerical modeling system, RAMS, was calibrated and validated with selected station and spatially interpolated precipitation data. Best combinations of parameterization schemes in RAMS were accordingly selected. Second, to mimic the standard method of PMP estimation by moisture maximization technique, relative humidity terms in the model were raised to 100% from ground up to the 500mb level. The obtained model-based maximum 72-hr precipitation values were named extreme precipitation (EP) as a distinction from the PMPs obtained by the standard methods. Third, six hypothetical reservoir size scenarios ranging from no-dam (all-dry) to the reservoir submerging half of basin were established to test the influence of reservoir size variation on EP. For the case of the ARW, our study clearly demonstrated that the assumption of stationarity that is implicit the traditional estimation of PMP can be rendered invalid to a large part due to the very presence of the artificial reservoir. Cloud tracking procedures performed on the basin also give indication of the
DSC “peak temperature” versus “maximum slope temperature” in determining TSSD temperature
Khatamian, D.
2010-10-01
One of the concerns of the nuclear industry is the deleterious effect of hydrogen on the structural integrity of the reactor core components due to delayed hydride cracking (DHC). The DHC process occurs when hydrogen concentration exceeds the terminal solid solubility (TSS) in the component. Thus, the accurate knowledge of TSS is necessary to predict the lifetime of the components. Differential scanning calorimetry (DSC) is normally used to measure the hydrogen TSS in zirconium alloys. There is a measurable change in the amount of heat absorbed by the specimen when the hydrides dissolve. The hydride dissolution process does not exhibit a well-defined "sharp" change in the heat-flow signal at the transition temperature. A typical DSC heat-flow curve for hydride dissolution has three definite features; "peak temperature" (PT), "maximum slope temperature" (MST) and "completion temperature". The present investigation aims to identify the part of the heat-flow signal that closely corresponds to the TSS temperature for hydride dissolution ( TTSSD). Coupons were cut from a Zr-2.5Nb specimen, which had been previously hydrided using an electrolytic cell to create a surface hydride layer of ˜20 μm thick on all sides of the specimen. The coupons were then annealed isothermally at various temperatures to establish the TTSSD under equilibrium conditions. Subsequently the hydride layer was removed and the coupons were analyzed for TSSD temperature using DSC. The PT and MST for each DSC run were determined and compared to the annealing temperature of the coupon. The results show that the annealing temperature (the equilibrium TTSSD) is much closer to the DSC PT than any other feature of the heat-flow curve.
Naturally Occuring Brands: a New Perspective on Place Marketing
Christine Wright-Isak
2010-01-01
Naturally Occurring Brands: A New Perspective on Place Marketing We suggest community types are "natural brands," because their differentiated imagery has meaning that influences consumer housing choices...
Sparks, R.B.; Stabin, M.G. [Oak Ridge Inst. for Science and Education, TN (United States)
1999-01-01
After administration of I-131 to the female patient, the possibility of radiation exposure of the embryo/fetus exists if the patient becomes pregnant while radioiodine remains in the body. Fetal radiation dose estimates for such cases were calculated. Doses were calculated for various maternal thyroid uptakes and time intervals between administration and conception, including euthyroid and hyperthyroid cases. The maximum fetal dose calculating was about 9.8E-03 mGy/MBq, which occurred with 100% maternal thyroid uptake and a 1 week interval between administration and conception. Placental crossover of the small amount of radioiodine remaining 90 days after conception was also considered. Such crossover could result in an additional fetal dose of 9.8E-05 mGy/MBq and a maximum fetal thyroid self dose of 3.5E-04 mGy/MBq.
王雪丽; 陶剑; 史宁中
2005-01-01
The primary goal of a phase I clinical trial is to find the maximum tolerable dose of a treatment. In this paper, we propose a new stepwise method based on confidence bound and information incorporation to determine the maximum tolerable dose among given dose levels. On the one hand, in order to avoid severe even fatal toxicity to occur and reduce the experimental subjects, the new method is executed from the lowest dose level, and then goes on in a stepwise fashion. On the other hand,in order to improve the accuracy of the recommendation, the final recommendation of the maximum tolerable dose is accomplished through the information incorporation of an additional experimental cohort at the same dose level. Furthermore, empirical simulation results show that the new method has some real advantages in comparison with the modified continual reassessment method.
Overview of Maximum Power Point Tracking Techniques for Photovoltaic Energy Production Systems
Koutroulis, Eftichios; Blaabjerg, Frede
2015-01-01
of photovoltaic sources during stochastically varying solar irradiation and ambient temperature conditions. Thus, the overall efficiency of the photovoltaic energy production system is increased. Numerous techniques have been presented during the last decade for implementing the maximum power point tracking......A substantial growth of the installed photovoltaic systems capacity has occurred around the world during the last decade, thus enhancing the availability of electric energy in an environmentally friendly way. The maximum power point tracking technique enables maximization of the energy production...... process in a photovoltaic system. This article provides an overview of the operating principles of these techniques, which are suited for either uniform or non-uniform solar irradiation conditions. The operational characteristics and implementation requirements of these maximum power point tracking...
A Note on k-Limited Maximum Base
Yang Ruishun; Yang Xiaowei
2006-01-01
The problem of k-limited maximum base was specified into two special problems of k-limited maximum base; that is, let subset D of the problem of k-limited maximum base be an independent set and a circuit of the matroid, respectively. It was proved that under this circumstance the collections of k-limited base satisfy base axioms. Then a new matroid was determined, and the problem of k-limited maximum base was transformed to the problem of maximum base of this new matroid. Aiming at the problem, two algorithms, which in essence are greedy algorithms based on former matroid, were presented for the two special problems of k-limited maximum base. They were proved to be reasonable and more efficient than the algorithm presented by Ma Zhongfan in view of the complexity of algorithm.
An Interval Maximum Entropy Method for Quadratic Programming Problem
RUI Wen-juan; CAO De-xin; SONG Xie-wu
2005-01-01
With the idea of maximum entropy function and penalty function methods, we transform the quadratic programming problem into an unconstrained differentiable optimization problem, discuss the interval extension of the maximum entropy function, provide the region deletion test rules and design an interval maximum entropy algorithm for quadratic programming problem. The convergence of the method is proved and numerical results are presented. Both theoretical and numerical results show that the method is reliable and efficient.
Solar concentrator with a toroidal relay module.
Lin, Jhe-Syuan; Liang, Chao-Wen
2015-10-01
III-V multijunction solar cells require solar concentrators with a high concentration ratio to reduce per watt cost and to increase solar energy transforming efficiency. This paper discusses a novel solar concentrator design that features a high concentration ratio, high transfer efficiency, thin profile design, and a high solar acceptance angle. The optical design of the concentrator utilizes a toroidal relay module, which includes both the off-axis relay lens and field lens design in a single concentric toroidal lens shape. The optical design concept of the concentrator is discussed and the simulation results are shown. The given exemplary design has an aspect ratio of 0.24, a high averaged optical concentration ratio 1230×, a maximum efficiency of 76.8%, and the solar acceptance angle of ±0.9°.
Integer Programming Model for Maximum Clique in Graph
YUAN Xi-bo; YANG You; ZENG Xin-hai
2005-01-01
The maximum clique or maximum independent set of graph is a classical problem in graph theory. Combined with Boolean algebra and integer programming, two integer programming models for maximum clique problem,which improve the old results were designed in this paper. Then, the programming model for maximum independent set is a corollary of the main results. These two models can be easily applied to computer algorithm and software, and suitable for graphs of any scale. Finally the models are presented as Lingo algorithms, verified and compared by several examples.
Counterexamples to convergence theorem of maximum-entropy clustering algorithm
于剑; 石洪波; 黄厚宽; 孙喜晨; 程乾生
2003-01-01
In this paper, we surveyed the development of maximum-entropy clustering algorithm, pointed out that the maximum-entropy clustering algorithm is not new in essence, and constructed two examples to show that the iterative sequence given by the maximum-entropy clustering algorithm may not converge to a local minimum of its objective function, but a saddle point. Based on these results, our paper shows that the convergence theorem of maximum-entropy clustering algorithm put forward by Kenneth Rose et al. does not hold in general cases.
Hernández-Mijares, Antonio; Bañuls, Celia; Peris, Jose E; Monzó, Nuria; Jover, Ana; Bellod, Lorena; Victor, Victor M; Rocha, Milagros
2013-11-15
A limited amount of research suggests that oral ingestion of pinitol (3-O-methyl-d-chiro-inositol) positively influences glucose tolerance in humans. This study assessed the effects of different doses of pinitol supplementation on glucose tolerance, insulin sensitivity and plasma pinitol concentrations. Thirty healthy subjects underwent two one-day trials in which they consumed a nutritive beverage (Fruit Up®) containing 2.5, 4.0 or 6.0g of pinitol and a corresponding placebo equivalent in both energy and carbohydrates. Blood samples were collected frequently over the 240-min test period. The pinitol-enriched beverage reduced serum glucose and insulin at 45 and 60min, but only at a dose of 6.0g. Plasma pinitol concentrations, maximum concentration and AUC increased according to the dose administered. The results show that a single dose of pinitol from a naturally-occurring food ingredient at the highest dose administered acutely influences indices of whole-body glucose tolerance and insulin sensitivity in healthy subjects.
Angular cheilitis occurring during orthodontic treatment: a case series.
Cross, David L; Short, Laura J
2008-12-01
Clinical experience has shown that angular cheilitis can occur during orthodontic treatment and may persist into retention, but the incidence of the condition is unknown. The purpose of this paper is to increase the awareness among clinicians of angular cheilitis occurring during orthodontic treatment. It also proposes a treatment regime which may be used.
CO2 maximum in the oxygen minimum zone (OMZ)
Paulmier, A.; Ruiz-Pino, D.; Garçon, V.
2011-02-01
Oxygen minimum zones (OMZs), known as suboxic layers which are mainly localized in the Eastern Boundary Upwelling Systems, have been expanding since the 20th "high CO2" century, probably due to global warming. OMZs are also known to significantly contribute to the oceanic production of N2O, a greenhouse gas (GHG) more efficient than CO2. However, the contribution of the OMZs on the oceanic sources and sinks budget of CO2, the main GHG, still remains to be established. We present here the dissolved inorganic carbon (DIC) structure, associated locally with the Chilean OMZ and globally with the main most intense OMZs (O22225 μmol kg-1, up to 2350 μmol kg-1) have been reported over the whole OMZ thickness, allowing the definition for all studied OMZs a Carbon Maximum Zone (CMZ). Locally off Chile, the shallow cores of the OMZ and CMZ are spatially and temporally collocated at 21° S, 30° S and 36° S despite different cross-shore, long-shore and seasonal configurations. Globally, the mean state of the main OMZs also corresponds to the largest carbon reserves of the ocean in subsurface waters. The CMZs-OMZs could then induce a positive feedback for the atmosphere during upwelling activity, as potential direct local sources of CO2. The CMZ paradoxically presents a slight "carbon deficit" in its core (~10%), meaning a DIC increase from the oxygenated ocean to the OMZ lower than the corresponding O2 decrease (assuming classical C/O molar ratios). This "carbon deficit" would be related to regional thermal mechanisms affecting faster O2 than DIC (due to the carbonate buffer effect) and occurring upstream in warm waters (e.g., in the Equatorial Divergence), where the CMZ-OMZ core originates. The "carbon deficit" in the CMZ core would be mainly compensated locally at the oxycline, by a "carbon excess" induced by a specific remineralization. Indeed, a possible co-existence of bacterial heterotrophic and autotrophic processes usually occurring at different depths could
OCCURRENCE OF HIGH-SPEED SOLAR WIND STREAMS OVER THE GRAND MODERN MAXIMUM
Mursula, K.; Holappa, L. [ReSoLVE Centre of Excellence, Department of Physics, University of Oulu (Finland); Lukianova, R., E-mail: kalevi.mursula@oulu.fi [Geophysical Center of Russian Academy of Science, Moscow (Russian Federation)
2015-03-01
In the declining phase of the solar cycle (SC), when the new-polarity fields of the solar poles are strengthened by the transport of same-signed magnetic flux from lower latitudes, the polar coronal holes expand and form non-axisymmetric extensions toward the solar equator. These extensions enhance the occurrence of high-speed solar wind (SW) streams (HSS) and related co-rotating interaction regions in the low-latitude heliosphere, and cause moderate, recurrent geomagnetic activity (GA) in the near-Earth space. Here, using a novel definition of GA at high (polar cap) latitudes and the longest record of magnetic observations at a polar cap station, we calculate the annually averaged SW speeds as proxies for the effective annual occurrence of HSS over the whole Grand Modern Maximum (GMM) from 1920s onward. We find that a period of high annual speeds (frequent occurrence of HSS) occurs in the declining phase of each of SCs 16-23. For most cycles the HSS activity clearly reaches a maximum in one year, suggesting that typically only one strong activation leading to a coronal hole extension is responsible for the HSS maximum. We find that the most persistent HSS activity occurred in the declining phase of SC 18. This suggests that cycle 19, which marks the sunspot maximum period of the GMM, was preceded by exceptionally strong polar fields during the previous sunspot minimum. This gives interesting support for the validity of solar dynamo theory during this dramatic period of solar magnetism.
The mechanics of granitoid systems and maximum entropy production rates.
Hobbs, Bruce E; Ord, Alison
2010-01-13
A model for the formation of granitoid systems is developed involving melt production spatially below a rising isotherm that defines melt initiation. Production of the melt volumes necessary to form granitoid complexes within 10(4)-10(7) years demands control of the isotherm velocity by melt advection. This velocity is one control on the melt flux generated spatially just above the melt isotherm, which is the control valve for the behaviour of the complete granitoid system. Melt transport occurs in conduits initiated as sheets or tubes comprising melt inclusions arising from Gurson-Tvergaard constitutive behaviour. Such conduits appear as leucosomes parallel to lineations and foliations, and ductile and brittle dykes. The melt flux generated at the melt isotherm controls the position of the melt solidus isotherm and hence the physical height of the Transport/Emplacement Zone. A conduit width-selection process, driven by changes in melt viscosity and constitutive behaviour, operates within the Transport Zone to progressively increase the width of apertures upwards. Melt can also be driven horizontally by gradients in topography; these horizontal fluxes can be similar in magnitude to vertical fluxes. Fluxes induced by deformation can compete with both buoyancy and topographic-driven flow over all length scales and results locally in transient 'ponds' of melt. Pluton emplacement is controlled by the transition in constitutive behaviour of the melt/magma from elastic-viscous at high temperatures to elastic-plastic-viscous approaching the melt solidus enabling finite thickness plutons to develop. The system involves coupled feedback processes that grow at the expense of heat supplied to the system and compete with melt advection. The result is that limits are placed on the size and time scale of the system. Optimal characteristics of the system coincide with a state of maximum entropy production rate.
S.B. Ross; R.E. Best; S.J. Maheras; T.I. McSweeney
2001-08-17
Accidents could occur during the transportation of spent nuclear fuel and high-level radioactive waste. This paper describes the risks and consequences to the public from accidents that are highly unlikely but that could have severe consequences. The impact of these accidents would include those to a collective population and to hypothetical maximally exposed individuals (MEIs). This document discusses accidents with conditions that have a chance of occurring more often than 1 in 10 million times in a year, called ''maximum reasonably foreseeable accidents''. Accidents and conditions less likely than this are not considered to be reasonably foreseeable.
Willacker, James J.; Eagles-Smith, Collin A.; Lutz, Michelle A.; Tate, Michael T.; Lepak, Jesse M.; Ackerman, Josh
2016-01-01
Anthropogenic manipulation of aquatic habitats can profoundly alter mercury (Hg) cycling and bioaccumulation. The impoundment of fluvial systems is among the most common habitat manipulations and is known to increase fish Hg concentrations immediately following impoundment. However, it is not well understood how Hg concentrations differ between reservoirs and lakes at large spatial and temporal scales or how reservoir management influences fish Hg concentrations. This study evaluated total Hg (THg) concentrations in 64,386 fish from 883 reservoirs and 1387 lakes, across the western United States and Canada, to assess differences between reservoirs and lakes, as well as the influence of reservoir management on fish THg concentrations. Fish THg concentrations were 1.4-fold higher in reservoirs (0.13 ± 0.011 μg/g wet weight ± standard error) than lakes (0.09 ± 0.006), though this difference varied among ecoregions. Fish THg concentrations were 1.5- to 2.6-fold higher in reservoirs than lakes of the North American Deserts, Northern Forests, and Mediterranean California ecoregions, but did not differ between reservoirs and lakes in four other ecoregions. Fish THg concentrations peaked in three-year-old reservoirs then rapidly declined in 4–12 year old reservoirs. Water management was particularly important in influencing fish THg concentrations, which were up to 11-times higher in reservoirs with minimum water storage occurring in May, June, or July compared to reservoirs with minimum storage occurring in other months. Between-year changes in maximum water storage strongly influenced fish THg concentrations, but within-year fluctuations in water levels did not influence fish THg concentrations. Specifically, fish THg concentrations increased up to 3.2-fold over the range of between-year changes in maximum water storage in all ecoregions except Mediterranean California. These data highlight the role of reservoir creation and management in influencing fish
Metamaterial anisotropic flux concentrators and magnetic arrays
Bjørk, Rasmus; Smith, Anders; Bahl, Christian R.H.
2013-01-01
A metamaterial magnetic flux concentrator is investigated in detail in combination with a Halbach cylinder of infinite length. A general analytical solution to the field is determined and the magnetic figure of merit is determined for a Halbach cylinder with a flux concentrator. It is shown...... that an ideal flux concentrator will not change the figure of merit of a given magnet design, while the non-ideal will always lower it. The geometric parameters producing maximum figure of merit, i.e., the most efficient devices, are determined. The force and torque between two concentric Halbach cylinders...
Narayan, A.P. [Univ. of Colorado, Boulder, CO (United States); Rainwater, J.C. [National Institute of Standards and Technology, Boulder, CO (United States); Hanley, H.J.M. [Univ. of Colorado, Boulder, CO (United States)]|[National Institute of Standards and Technology, Boulder, CO (United States)
1995-03-01
A study of the Weissenberg effect (rod climbing in a stirred system) based on nonequilibrium molecular dynamics (NEMD) is reported. Simulation results from a soft-sphere fluid are used to obtain a self-consistent free-surface profile of the fluid of finite compressibility undergoing Couette flow between concentric cylinders. A numerical procedure is then applied to calculate the height profile for a hypothetical fluid with thermophysical properties of the soft-sphere liquid and of a dense colloidal suspension. The height profile calculated is identified with shear thickening and the forms of the viscometric functions. The maximum climb occurs between the cylinders rather than at the inner cylinder.
Combining Experiments and Simulations Using the Maximum Entropy Principle
Boomsma, Wouter; Ferkinghoff-Borg, Jesper; Lindorff-Larsen, Kresten
2014-01-01
are not in quantitative agreement with experimental data. The principle of maximum entropy is a general procedure for constructing probability distributions in the light of new data, making it a natural tool in cases when an initial model provides results that are at odds with experiments. The number of maximum entropy...
49 CFR 174.86 - Maximum allowable operating speed.
2010-10-01
... 49 Transportation 2 2010-10-01 2010-10-01 false Maximum allowable operating speed. 174.86 Section... operating speed. (a) For molten metals and molten glass shipped in packagings other than those prescribed in § 173.247 of this subchapter, the maximum allowable operating speed may not exceed 24 km/hour (15...
Parametric optimization of thermoelectric elements footprint for maximum power generation
Rezania, A.; Rosendahl, Lasse; Yin, Hao
2014-01-01
The development studies in thermoelectric generator (TEG) systems are mostly disconnected to parametric optimization of the module components. In this study, optimum footprint ratio of n- and p-type thermoelectric (TE) elements is explored to achieve maximum power generation, maximum cost-perform...
30 CFR 56.19066 - Maximum riders in a conveyance.
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum riders in a conveyance. 56.19066 Section 56.19066 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Hoisting Procedures § 56.19066 Maximum riders in a conveyance. In shafts inclined over 45...
30 CFR 57.19066 - Maximum riders in a conveyance.
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum riders in a conveyance. 57.19066 Section 57.19066 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Hoisting Procedures § 57.19066 Maximum riders in a conveyance. In shafts inclined over 45...
Maximum Atmospheric Entry Angle for Specified Retrofire Impulse
T. N. Srivastava
1969-07-01
Full Text Available Maximum atmospheric entry angles for vehicles initially moving in elliptic orbits are investigated and it is shown that tangential retrofire impulse at the apogee results in the maximum entry angle. Equivalence of maximizing the entry angle and minimizing the retrofire impulse is also established.
5 CFR 838.711 - Maximum former spouse survivor annuity.
2010-01-01
... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Maximum former spouse survivor annuity... Orders Awarding Former Spouse Survivor Annuities Limitations on Survivor Annuities § 838.711 Maximum former spouse survivor annuity. (a) Under CSRS, payments under a court order may not exceed the...
46 CFR 151.45-6 - Maximum amount of cargo.
2010-10-01
... 46 Shipping 5 2010-10-01 2010-10-01 false Maximum amount of cargo. 151.45-6 Section 151.45-6 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Operations § 151.45-6 Maximum amount of cargo. (a)...
20 CFR 226.52 - Total annuity subject to maximum.
2010-04-01
... rate effective on the date the supplemental annuity begins, before any reduction for a private pension... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Total annuity subject to maximum. 226.52... COMPUTING EMPLOYEE, SPOUSE, AND DIVORCED SPOUSE ANNUITIES Railroad Retirement Family Maximum § 226.52...
49 CFR 195.406 - Maximum operating pressure.
2010-10-01
... 49 Transportation 3 2010-10-01 2010-10-01 false Maximum operating pressure. 195.406 Section 195... HAZARDOUS LIQUIDS BY PIPELINE Operation and Maintenance § 195.406 Maximum operating pressure. (a) Except for surge pressures and other variations from normal operations, no operator may operate a pipeline at a...
Maximum-entropy clustering algorithm and its global convergence analysis
无
2001-01-01
Constructing a batch of differentiable entropy functions touniformly approximate an objective function by means of the maximum-entropy principle, a new clustering algorithm, called maximum-entropy clustering algorithm, is proposed based on optimization theory. This algorithm is a soft generalization of the hard C-means algorithm and possesses global convergence. Its relations with other clustering algorithms are discussed.
Distribution of maximum loss of fractional Brownian motion with drift
Çağlar, Mine; Vardar-Acar, Ceren
2013-01-01
In this paper, we find bounds on the distribution of the maximum loss of fractional Brownian motion with H >= 1/2 and derive estimates on its tail probability. Asymptotically, the tail of the distribution of maximum loss over [0, t] behaves like the tail of the marginal distribution at time t.
48 CFR 436.575 - Maximum workweek-construction schedule.
2010-10-01
...-construction schedule. 436.575 Section 436.575 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE... Maximum workweek-construction schedule. The contracting officer shall insert the clause at 452.236-75, Maximum Workweek-Construction Schedule, if the clause at FAR 52.236-15 is used and the contractor's...
5 CFR 550.105 - Biweekly maximum earnings limitation.
2010-01-01
... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Biweekly maximum earnings limitation. 550.105 Section 550.105 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PAY ADMINISTRATION (GENERAL) Premium Pay Maximum Earnings Limitations § 550.105 Biweekly...
5 CFR 550.106 - Annual maximum earnings limitation.
2010-01-01
... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Annual maximum earnings limitation. 550.106 Section 550.106 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PAY ADMINISTRATION (GENERAL) Premium Pay Maximum Earnings Limitations § 550.106 Annual...
32 CFR 842.35 - Depreciation and maximum allowances.
2010-07-01
... 32 National Defense 6 2010-07-01 2010-07-01 false Depreciation and maximum allowances. 842.35... LITIGATION ADMINISTRATIVE CLAIMS Personnel Claims (31 U.S.C. 3701, 3721) § 842.35 Depreciation and maximum allowances. The military services have jointly established the “Allowance List-Depreciation Guide”...
Marcia Atauri Cardeli de Lucena
2013-12-01
Full Text Available Low availability of nitrogen (N is a factor that limits forage production. Pastures are mostly formed of grasses, which need large N amounts to sustain high yields. Additionally, the availability of this nutrient affects the persistence and quality of the forage produced. However, when applying fertilizers containing nitrogen up to 50% can be lost, making their use costly for farmers. N is a highly volatile gas, and urea, widely used in agriculture, contains 46% N. When urea comes in contact with moisture in the soil, hydrolysis occurs due to the precipitation of the enzyme urease, accelerating the transformation of urea into ammonia, which can be lost by volatilization. One of the techniques to increase the efficiency of using urea is application of nitrogen fertilizers along with urease inhibitors, to retard the breakdown of urea so that it becomes incorporated in the soil slowly. One of the inhibitors used is N-(n-butyl phosphate triamide (NBPT. This study aimed to assess the effect of nitrogen sources and doses on some productive characteristics of Áries grass (Panicum maximum, Jacq to find ways to improve the effectiveness of nitrogen application. The tests were performed at Centro Nutrição Animal e Pastagens – Instituto de Zootecnia in Nova Odessa, São Paulo, from March to August 2012. The experimental design was randomized blocks, with five replications in 2 x 3 factorial setup, where we studied the use of urea and urea containing urease inhibitor (NPBT, in pottery vessels (3.34 dm3. The treatments involved the following rates of N application: 0, 75.0 and 150.0 kg ha-1. The traits analyzed were dry biomass, leaf dry weight, dry weight of pseudostems, number of tillers, leaf area, nitrogen concentration and accumulation, and concentrations of chlorophyll and flavonoids. The data were analyzed using de GLM procedure of the SAS program. The results showed that nitrogen promoted considerable improvements in the plants, contributing to
Effect of Nearby Forest Fires on Ground Level Ozone Concentrations in Santiago, Chile
María A. Rubio
2015-12-01
Full Text Available On 4 and 8 January 2014, at the height of the austral summer, intense wildfires in forests and dry pastures occurred in the Melipilla sector, located about 70 km to the southwest of Santiago, the Chilean capital, affecting more than 6 million inhabitants. Low level winds transported the forest fire plume towards Santiago causing a striking decrease in visibility and a marked increase in the concentration of both primary (PM10 and CO and secondary (Ozone pollutants in the urban atmosphere. In particular, ozone maximum concentrations in the Santiago basin reached hourly averages well above 80 ppb, the national air quality standard. This ozone increase took place at the three sampling sites considered in the present study. These large values can be explained in terms of high NOx concentrations and NO2/NO ratios in biomass burning emissions.
Becker, Joseph F.; Valentin, Jose
1996-01-01
The maximum entropy technique was successfully applied to the deconvolution of overlapped chromatographic peaks. An algorithm was written in which the chromatogram was represented as a vector of sample concentrations multiplied by a peak shape matrix. Simulation results demonstrated that there is a trade off between the detector noise and peak resolution in the sense that an increase of the noise level reduced the peak separation that could be recovered by the maximum entropy method. Real data originated from a sample storage column was also deconvoluted using maximum entropy. Deconvolution is useful in this type of system because the conservation of time dependent profiles depends on the band spreading processes in the chromatographic column, which might smooth out the finer details in the concentration profile. The method was also applied to the deconvolution of previously interpretted Pioneer Venus chromatograms. It was found in this case that the correct choice of peak shape function was critical to the sensitivity of maximum entropy in the reconstruction of these chromatograms.
Maximum Principles for Discrete and Semidiscrete Reaction-Diffusion Equation
Petr Stehlík
2015-01-01
Full Text Available We study reaction-diffusion equations with a general reaction function f on one-dimensional lattices with continuous or discrete time ux′ (or Δtux=k(ux-1-2ux+ux+1+f(ux, x∈Z. We prove weak and strong maximum and minimum principles for corresponding initial-boundary value problems. Whereas the maximum principles in the semidiscrete case (continuous time exhibit similar features to those of fully continuous reaction-diffusion model, in the discrete case the weak maximum principle holds for a smaller class of functions and the strong maximum principle is valid in a weaker sense. We describe in detail how the validity of maximum principles depends on the nonlinearity and the time step. We illustrate our results on the Nagumo equation with the bistable nonlinearity.
Experimental study on prediction model for maximum rebound ratio
LEI Wei-dong; TENG Jun; A.HEFNY; ZHAO Jian; GUAN Jiong
2007-01-01
The proposed prediction model for estimating the maximum rebound ratio was applied to a field explosion test, Mandai test in Singapore.The estimated possible maximum Deak particle velocities(PPVs)were compared with the field records.Three of the four available field-recorded PPVs lie exactly below the estimated possible maximum values as expected.while the fourth available field-recorded PPV lies close to and a bit higher than the estimated maximum possible PPV The comparison results show that the predicted PPVs from the proposed prediction model for the maximum rebound ratio match the field.recorded PPVs better than those from two empirical formulae.The very good agreement between the estimated and field-recorded values validates the proposed prediction model for estimating PPV in a rock mass with a set of ipints due to application of a two dimensional compressional wave at the boundary of a tunnel or a borehole.
Does crater 'saturation equilibrium' occur in the solar system?
Hartmann, W. K.
1984-01-01
The similarity in crater densities on the most heavily cratered surfaces throughout the solar system is statistically examined and discussed in terms of a 'saturation equilibrium' being achieved by cratering processes. This hypothesis accounts for (1) the similarity in maximum relative crater density, below certain theoretically predicted values, on all heavily cratered surfaces; (2) a levelling off at this same relative density among 100-m scale craters in populations on lunar maria and other sparsely cratered lunar surfaces; and (3) the approximate uniformity of maximum relative densities on Saturn satellites. The lunar frontside upland crater population, sometimes described as a well-preserved production function useful for interpreting other planetary surfaces, is found not to be a production function. It was modified by intercrater plains at least partly formed by early upland basaltic lava flooding.
Comparative Toxicology of Libby Amphibole and Naturally Occurring Asbestos
Summary sentence: Comparative toxicology of Libby amphibole (LA) and site-specific naturally occurring asbestos (NOA) provides new insights on physical properties influencing health effects and mechanisms of asbestos-induced inflammation, fibrosis, and tumorigenesis.Introduction/...
Comparative Toxicology of Libby Amphibole and Naturally Occurring Asbestos
Summary sentence: Comparative toxicology of Libby amphibole (LA) and site-specific naturally occurring asbestos (NOA) provides new insights on physical properties influencing health effects and mechanisms of asbestos-induced inflammation, fibrosis, and tumorigenesis.Introduction/...
Shireesh Apte
2010-09-01
Full Text Available Amphiphilic excipients, such as surfactants, have been shown to be inhibitors of the multidrug resistance (MDR efflux pump transporter protein, P glycoprotein (Pgp. In vitro studies using many surfactants have demonstrated that those with an optimum hydrophilic-lipophilic balance (HLB exhibit greater efflux pump inhibition than those that are either very hydrophobic, or very hydrophilic, although the correlation of HLB to Pgp inhibition activity remains weak. Using the data from multiple in vitro studies, a model has been conceptualized that underscores the attributes of both the HLB and the critical micellar concentration (CMC, occurring in tandem, and unable of being varied independently, as key determinants toward prediction of surfactant Pgp inhibition activity. The algorithm that formalizes this concept provides a ‘semi-rational’ method of choosing surfactants for a specific type of cancer for maximum inhibition of MDR.
OPTIMAL FEED STRATEGY FOR FED-BATCH GLYCEROL FERMENTATION DETERMINED BY MAXIMUM PRINCIPLE
无
2000-01-01
1 IntroductionGlycerol fed-batch fermentation is attractive tocommercial application since it can control theglucose concentration by changing the feed rate andget a high glycerol yield, therefore it is essential todevelop an optimal glucose feed strategy. For mostof fed-batch fermentation, optimization of feed ratewas based on Pontryagin's maximum principle [if.Since the term of feed rate appears linearly in theHamiltonian, the optimal feed rate profile usuallyconsists of ba,lg-bang intervals and singular ...
Heavy Metal Concentrations in Maltese Potable Water
Roberta Bugeja
2015-05-01
Full Text Available This study evaluates the levels of aluminum (Al, cadmium (Cd, chromium (Cr, copper (Cu, iron (Fe, lead (Pb, nickel (Ni and zinc (Zn in tap water samples of forty localities from around the Maltese Islands together with their corresponding service supply reservoirs. The heavy metal concentrations obtained indicated that concentrations of the elements were generally below the maximum allowed concentration established by the Maltese legislation. In terms of the Maltese and EU water quality regulations, 17.5% of the localities sampled yielded water that failed the acceptance criteria for a single metal in drinking water. Higher concentrations of some metals were observed in samples obtained at the end of the distribution network, when compared to the concentrations at the source. The observed changes in metal concentrations between the localities’ samples and the corresponding supply reservoirs were significant. The higher metal concentrations obtained in the samples from the localities can be attributed to leaching in the distribution network.
Deshpande, Paritosh C; Tilwankar, Atit K; Asolekar, Shyam R
2012-11-01
The 180 ship recycling yards located on Alang-Sosiya beach in the State of Gujarat on the west coast of India is the world's largest cluster engaged in dismantling. Yearly 350 ships have been dismantled (avg. 10,000 ton steel/ship) with the involvement of about 60,000 workers. Cutting and scrapping of plates or scraping of painted metal surfaces happens to be the commonly performed operation during ship breaking. The pollutants released from a typical plate-cutting operation can potentially either affect workers directly by contaminating the breathing zone (air pollution) or can potentially add pollution load into the intertidal zone and contaminate sediments when pollutants get emitted in the secondary working zone and gets subjected to tidal forces. There was a two-pronged purpose behind the mathematical modeling exercise performed in this study. First, to estimate the zone of influence up to which the effect of plume would extend. Second, to estimate the cumulative maximum concentration of heavy metals that can potentially occur in ambient atmosphere of a given yard. The cumulative maximum heavy metal concentration was predicted by the model to be between 113 μg/Nm(3) and 428 μg/Nm(3) (at 4m/s and 1m/s near-ground wind speeds, respectively). For example, centerline concentrations of lead (Pb) in the yard could be placed between 8 and 30 μg/Nm(3). These estimates are much higher than the Indian National Ambient Air Quality Standards (NAAQS) for Pb (0.5 μg/Nm(3)). This research has already become the critical science and technology inputs for formulation of policies for eco-friendly dismantling of ships, formulation of ideal procedure and corresponding health, safety, and environment provisions. The insights obtained from this research are also being used in developing appropriate technologies for minimizing exposure to workers and minimizing possibilities of causing heavy metal pollution in the intertidal zone of ship recycling yards in India.
Franzese, A. M.; Goldstein, S. L.; Hemming, S. R.
2015-12-01
The Southern Hemisphere Westerlies are known to be important for climate due to their effects on the global carbon cycle and on the global thermohaline circulation. Many proxy records suggest that the strength and position of the Southern Hemisphere westerly winds have changed significantly since the Last Glacial Maximum (LGM) at ~21,000 years BP. However, a recent compilation of all available evidence for Southern Hemisphere westerly wind changes during the Last Glacial Maximum (LGM) led to the conclusion that "their strength and position in colder and warmer climates relative to today remain a wide open question" (Kohfeld et al. (2013) Quaternary Science Reviews, 68). This paper finds that an equatorward displacement of the glacial winds is consistent with observations, but cannot rule out other, competing hypotheses. Using the geochemical characteristics of deep-sea sediments deposited along the Mid-Atlantic Ridge, I test the hypothesis that the LGM Southern Hemisphere Westerlies were displaced northward. In the central South Atlantic, dust can be delivered from South America via the Westerlies, or from Africa via the Trade Winds. The continental sources of South America and Africa have very different geochemical signatures, making it possible to distinguish between eolian transport via the Westerlies vs. the Trade Winds. Any northward shift in the Southern Hemisphere Westerlies would increase the northward extent of a South American provenance in sediments dominated by eolian sources. I will present geochemical provenance data (radiogenic isotope ratios; major and trace element concentrations) in a latitudinal transect of cores along the Mid-Atlantic Ridge that document whether, in fact, such a shift occurred, and put an important constraint on how far north the wind belts shifted during the LGM.
2010-07-01
... as specified in 40 CFR 1065.610. This is the maximum in-use engine speed used for calculating the NOX... procedures of 40 CFR part 1065, based on the manufacturer's design and production specifications for the..., power density, and maximum in-use engine speed. 1042.140 Section 1042.140 Protection of...
Andrikopoulos, Nikolaos K; Kaliora, Andriana C; Assimopoulou, Andreana N; Papapeorgiou, Vassilios P
2003-05-01
Naturally occurring gums and resins with beneficial pharmaceutical and nutraceutical properties were tested for their possible protective effect against copper-induced LDL oxidation in vitro. Chiosmastic gum (CMG) (Pistacia lentiscus var. Chia resin) was the most effective in protecting human LDL from oxidation. The minimum and maximum doses for the saturation phenomena of inhibition of LDL oxidation were 2.5 mg and 50 mg CMG (75.3% and 99.9%, respectively). The methanol/water extract of CMG was the most effective compared with other solvent combinations. CMG when fractionated in order to determine a structure-activity relationship showed that the total mastic essential oil, collofonium-like residue and acidic fractions of CMG exhibited a high protective activity ranging from 65.0% to 77.8%. The other natural gums and resins (CMG resin 'liquid collection', P. terebinthus var. Chia resin, dammar resin, acacia gum, tragacanth gum, storax gum) also tested as above, showed 27.0%-78.8% of the maximum LDL protection. The other naturally occurring substances, i.e. triterpenes (amyrin, oleanolic acid, ursolic acid, lupeol, 18-a-glycyrrhetinic acid) and hydroxynaphthoquinones (naphthazarin, shikonin and alkannin) showed 53.5%-78.8% and 27.0%-64.1% LDL protective activity, respectively. The combination effects (68.7%-76.2% LDL protection) of ursolic-, oleanolic- and ursodeoxycholic- acids were almost equal to the effect (75.3%) of the CMG extract in comparable doses.
Sandia concentrator array testing experiences
Gerwin, H. J.; Rogers, C. B.; Beavis, L. C.
An assortment of PV concentrator modules and arrays have been tested and evaluated at the Sandia outdoor test facility. These test items include actively-cooled parabolic reflector and linear Fresnel lens concentrators, and actively- and passively-cooled point focus collectors. Maximum power efficiencies were measured over a range of sunlight intensities and cell temperatures, then a linear equation relating efficiency to cell temperature and insolation was developed for each module and array by using a multiple linear regression analysis technique on the data. An evaluation of the suitability of Polyvinyl-Butyral (PVB) as a material used to laminate solar cells to glass is presented. Some general observations are made on the accuracy of tracking systems, and the maintenance of these systems.
Maximum Likelihood Estimation of the Identification Parameters and Its Correction
无
2002-01-01
By taking the subsequence out of the input-output sequence of a system polluted by white noise, anindependent observation sequence and its probability density are obtained and then a maximum likelihood estimation of theidentification parameters is given. In order to decrease the asymptotic error, a corrector of maximum likelihood (CML)estimation with its recursive algorithm is given. It has been proved that the corrector has smaller asymptotic error thanthe least square methods. A simulation example shows that the corrector of maximum likelihood estimation is of higherapproximating precision to the true parameters than the least square methods.
Maximum frequency of the decametric radiation from Jupiter
Barrow, C. H.; Alexander, J. K.
1980-01-01
The upper frequency limits of Jupiter's decametric radio emission are found to be essentially the same when observed from the earth or, with considerably higher sensitivity, from the Voyager spacecraft close to Jupiter. This suggests that the maximum frequency is a real cut-off corresponding to a maximum gyrofrequency of about 38-40 MHz at Jupiter. It no longer appears to be necessary to specify different cut-off frequencies for the Io and non-Io emission as the maximum frequencies are roughly the same in each case.
Nonuniform sampling and maximum entropy reconstruction in multidimensional NMR.
Hoch, Jeffrey C; Maciejewski, Mark W; Mobli, Mehdi; Schuyler, Adam D; Stern, Alan S
2014-02-18
NMR spectroscopy is one of the most powerful and versatile analytic tools available to chemists. The discrete Fourier transform (DFT) played a seminal role in the development of modern NMR, including the multidimensional methods that are essential for characterizing complex biomolecules. However, it suffers from well-known limitations: chiefly the difficulty in obtaining high-resolution spectral estimates from short data records. Because the time required to perform an experiment is proportional to the number of data samples, this problem imposes a sampling burden for multidimensional NMR experiments. At high magnetic field, where spectral dispersion is greatest, the problem becomes particularly acute. Consequently multidimensional NMR experiments that rely on the DFT must either sacrifice resolution in order to be completed in reasonable time or use inordinate amounts of time to achieve the potential resolution afforded by high-field magnets. Maximum entropy (MaxEnt) reconstruction is a non-Fourier method of spectrum analysis that can provide high-resolution spectral estimates from short data records. It can also be used with nonuniformly sampled data sets. Since resolution is substantially determined by the largest evolution time sampled, nonuniform sampling enables high resolution while avoiding the need to uniformly sample at large numbers of evolution times. The Nyquist sampling theorem does not apply to nonuniformly sampled data, and artifacts that occur with the use of nonuniform sampling can be viewed as frequency-aliased signals. Strategies for suppressing nonuniform sampling artifacts include the careful design of the sampling scheme and special methods for computing the spectrum. Researchers now routinely report that they can complete an N-dimensional NMR experiment 3(N-1) times faster (a 3D experiment in one ninth of the time). As a result, high-resolution three- and four-dimensional experiments that were prohibitively time consuming are now practical
LANDFILL OPERATION FOR CARBON SEQUESTRATION AND MAXIMUM METHANE EMISSION CONTROL
Don Augenstein; Ramin Yazdani; Rick Moore; Michelle Byars; Jeff Kieffer; Professor Morton Barlaz; Rinav Mehta
2000-02-26
Controlled landfilling is an approach to manage solid waste landfills, so as to rapidly complete methane generation, while maximizing gas capture and minimizing the usual emissions of methane to the atmosphere. With controlled landfilling, methane generation is accelerated to more rapid and earlier completion to full potential by improving conditions (principally moisture, but also temperature) to optimize biological processes occurring within the landfill. Gas is contained through use of surface membrane cover. Gas is captured via porous layers, under the cover, operated at slight vacuum. A field demonstration project has been ongoing under NETL sponsorship for the past several years near Davis, CA. Results have been extremely encouraging. Two major benefits of the technology are reduction of landfill methane emissions to minuscule levels, and the recovery of greater amounts of landfill methane energy in much shorter times, more predictably, than with conventional landfill practice. With the large amount of US landfill methane generated, and greenhouse potency of methane, better landfill methane control can play a substantial role both in reduction of US greenhouse gas emissions and in US renewable energy. The work described in this report, to demonstrate and advance this technology, has used two demonstration-scale cells of size (8000 metric tons [tonnes]), sufficient to replicate many heat and compaction characteristics of larger ''full-scale'' landfills. An enhanced demonstration cell has received moisture supplementation to field capacity. This is the maximum moisture waste can hold while still limiting liquid drainage rate to minimal and safely manageable levels. The enhanced landfill module was compared to a parallel control landfill module receiving no moisture additions. Gas recovery has continued for a period of over 4 years. It is quite encouraging that the enhanced cell methane recovery has been close to 10-fold that experienced with
THE MAXIMUM ENERGY OF ACCELERATED PARTICLES IN RELATIVISTIC COLLISIONLESS SHOCKS
Sironi, Lorenzo [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Spitkovsky, Anatoly [Department of Astrophysical Sciences, Princeton University, Princeton, NJ 08544-1001 (United States); Arons, Jonathan, E-mail: lsironi@cfa.harvard.edu [Department of Astronomy, Department of Physics, and Theoretical Astrophysics Center, University of California, Berkeley, CA 94720 (United States)
2013-07-01
The afterglow emission from gamma-ray bursts (GRBs) is usually interpreted as synchrotron radiation from electrons accelerated at the GRB external shock that propagates with relativistic velocities into the magnetized interstellar medium. By means of multi-dimensional particle-in-cell simulations, we investigate the acceleration performance of weakly magnetized relativistic shocks, in the magnetization range 0 {approx}< {sigma} {approx}< 10{sup -1}. The pre-shock magnetic field is orthogonal to the flow, as generically expected for relativistic shocks. We find that relativistic perpendicular shocks propagating in electron-positron plasmas are efficient particle accelerators if the magnetization is {sigma} {approx}< 10{sup -3}. For electron-ion plasmas, the transition to efficient acceleration occurs for {sigma} {approx}< 3 Multiplication-Sign 10{sup -5}. Here, the acceleration process proceeds similarly for the two species, since the electrons enter the shock nearly in equipartition with the ions, as a result of strong pre-heating in the self-generated upstream turbulence. In both electron-positron and electron-ion shocks, we find that the maximum energy of the accelerated particles scales in time as {epsilon}{sub max}{proportional_to}t {sup 1/2}. This scaling is shallower than the so-called (and commonly assumed) Bohm limit {epsilon}{sub max}{proportional_to}t, and it naturally results from the small-scale nature of the Weibel turbulence generated in the shock layer. In magnetized plasmas, the energy of the accelerated particles increases until it reaches a saturation value {epsilon}{sub sat}/{gamma}{sub 0} m{sub i}c {sup 2} {approx} {sigma}{sup -1/4}, where {gamma}{sub 0} m{sub i}c {sup 2} is the mean energy per particle in the upstream bulk flow. Further energization is prevented by the fact that the self-generated turbulence is confined within a finite region of thickness {proportional_to}{sigma}{sup -1/2} around the shock. Our results can provide physically
Mooney, Walter D.; Ritsema, Jeroen; Hwang, Yong Keun
2012-01-01
A joint analysis of global seismicity and seismic tomography indicates that the seismic potential of continental intraplate regions is correlated with the seismic properties of the lithosphere. Archean and Early Proterozoic cratons with cold, stable continental lithospheric roots have fewer crustal earthquakes and a lower maximum earthquake catalog moment magnitude (Mcmax). The geographic distribution of thick lithospheric roots is inferred from the global seismic model S40RTS that displays shear-velocity perturbations (δVS) relative to the Preliminary Reference Earth Model (PREM). We compare δVS at a depth of 175 km with the locations and moment magnitudes (Mw) of intraplate earthquakes in the crust (Schulte and Mooney, 2005). Many intraplate earthquakes concentrate around the pronounced lateral gradients in lithospheric thickness that surround the cratons and few earthquakes occur within cratonic interiors. Globally, 27% of stable continental lithosphere is underlain by δVS≥3.0%, yet only 6.5% of crustal earthquakes with Mw>4.5 occur above these regions with thick lithosphere. No earthquakes in our catalog with Mw>6 have occurred above mantle lithosphere with δVS>3.5%, although such lithosphere comprises 19% of stable continental regions. Thus, for cratonic interiors with seismically determined thick lithosphere (1) there is a significant decrease in the number of crustal earthquakes, and (2) the maximum moment magnitude found in the earthquake catalog is Mcmax=6.0. We attribute these observations to higher lithospheric strength beneath cratonic interiors due to lower temperatures and dehydration in both the lower crust and the highly depleted lithospheric root.
Skin picking disorder with co-occurring body dysmorphic disorder.
Grant, Jon E; Redden, Sarah A; Leppink, Eric W; Odlaug, Brian L
2015-09-01
There is clinical overlap between skin picking disorder (SPD) and body dysmorphic disorder (BDD), but little research has examined clinical and cognitive correlates of the two disorders when they co-occur. Of 55 participants with SPD recruited for a neurocognitive study and two pharmacological studies, 16 (29.1%) had co-occurring BDD. SPD participants with and without BDD were compared to each other and to 40 healthy volunteers on measures of symptom severity, social functioning, and cognitive assessments using the Stop-signal task (assessing response impulsivity) and the Intra-dimensional/Extra-dimensional Set Shift task (assessing cognitive flexibility). Individuals with SPD and BDD exhibited significantly worse picking, significantly worse overall psychosocial functioning, and significantly greater dysfunction on aspects of cognitive flexibility. These results indicate that when SPD co-occurs with BDD unique clinical and cognitive aspects of SPD may be more pronounced. Future work should explore possible subgroups in SPD and whether these predict different treatment outcomes.
Endometrial carcinoma occuring from polycystic ovary disease : A case report
Seong, Su Ok; Jeon, Woo Ki [Inje Univ. College of Medicine, Seoul (Korea, Republic of)
1996-12-01
Endometrial carcinoma usually occurs in postmenopausal women ; less than 5% occurs in women under the age of 40. Up to one quarter of endometrial carcinoma patients below this age have PCO(polycystic ovary disease, Stein-Leventhal syndrome). The increased incidence of endometrial carcinoma in patients with PCO is related to chronic estrogenic stimulation. We report MR imaging in one case of endometrial carcinoma occuring in a 23 year old woman with PCO and had complained of hypermenorrhea for about three years. On T2-weighted MR image the endometrial cavity was seen to be distended with protruded endometrial masses of intermediate signal intensity, and the junctional zone was disrupted beneath the masses. Both ovaries were best seen on T2-weighted MR imaging and showed multiple small peripheral cysts and low signal-intensity central stroma.
The Application of Maximum Principle in Supply Chain Cost Optimization
Zhou Ling; Wang Jun
2013-01-01
In this paper, using the maximum principle for analyzing dynamic cost, we propose a new two-stage supply chain model of the manufacturing-assembly mode for high-tech perishable products supply chain...
Maximum Principle for Nonlinear Cooperative Elliptic Systems on IR N
LEADI Liamidi; MARCOS Aboubacar
2011-01-01
We investigate in this work necessary and sufficient conditions for having a Maximum Principle for a cooperative elliptic system on the whole (IR)N.Moreover,we prove the existence of solutions by an approximation method for the considered system.
Maximum Likelihood Factor Structure of the Family Environment Scale.
Fowler, Patrick C.
1981-01-01
Presents the maximum likelihood factor structure of the Family Environment Scale. The first bipolar dimension, "cohesion v conflict," measures relationship-centered concerns, while the second unipolar dimension is an index of "organizational and control" activities. (Author)
Multiresolution maximum intensity volume rendering by morphological adjunction pyramids
Roerdink, Jos B.T.M.
We describe a multiresolution extension to maximum intensity projection (MIP) volume rendering, allowing progressive refinement and perfect reconstruction. The method makes use of morphological adjunction pyramids. The pyramidal analysis and synthesis operators are composed of morphological 3-D
Multiresolution Maximum Intensity Volume Rendering by Morphological Adjunction Pyramids
Roerdink, Jos B.T.M.
2001-01-01
We describe a multiresolution extension to maximum intensity projection (MIP) volume rendering, allowing progressive refinement and perfect reconstruction. The method makes use of morphological adjunction pyramids. The pyramidal analysis and synthesis operators are composed of morphological 3-D
Water Quality Assessment and Total Maximum Daily Loads Information (ATTAINS)
U.S. Environmental Protection Agency — The Water Quality Assessment TMDL Tracking And Implementation System (ATTAINS) stores and tracks state water quality assessment decisions, Total Maximum Daily Loads...
Combining Experiments and Simulations Using the Maximum Entropy Principle
Boomsma, Wouter; Ferkinghoff-Borg, Jesper; Lindorff-Larsen, Kresten
2014-01-01
are not in quantitative agreement with experimental data. The principle of maximum entropy is a general procedure for constructing probability distributions in the light of new data, making it a natural tool in cases when an initial model provides results that are at odds with experiments. The number of maximum entropy...... in the context of a simple example, after which we proceed with a real-world application in the field of molecular simulations, where the maximum entropy procedure has recently provided new insight. Given the limited accuracy of force fields, macromolecular simulations sometimes produce results....... Three very recent papers have explored this problem using the maximum entropy approach, providing both new theoretical and practical insights to the problem. We highlight each of these contributions in turn and conclude with a discussion on remaining challenges....
On the sufficiency of the linear maximum principle
Vidal, Rene Victor Valqui
1987-01-01
Presents a family of linear maximum principles for the discrete-time optimal control problem, derived from the saddle-point theorem of mathematical programming. Some simple examples illustrate the applicability of the main theoretical results...
Maximum Photovoltaic Penetration Levels on Typical Distribution Feeders: Preprint
Hoke, A.; Butler, R.; Hambrick, J.; Kroposki, B.
2012-07-01
This paper presents simulation results for a taxonomy of typical distribution feeders with various levels of photovoltaic (PV) penetration. For each of the 16 feeders simulated, the maximum PV penetration that did not result in steady-state voltage or current violation is presented for several PV location scenarios: clustered near the feeder source, clustered near the midpoint of the feeder, clustered near the end of the feeder, randomly located, and evenly distributed. In addition, the maximum level of PV is presented for single, large PV systems at each location. Maximum PV penetration was determined by requiring that feeder voltages stay within ANSI Range A and that feeder currents stay within the ranges determined by overcurrent protection devices. Simulations were run in GridLAB-D using hourly time steps over a year with randomized load profiles based on utility data and typical meteorological year weather data. For 86% of the cases simulated, maximum PV penetration was at least 30% of peak load.
16 CFR 1505.8 - Maximum acceptable material temperatures.
2010-01-01
... Association, 155 East 44th Street, New York, NY 10017. Material Degrees C. Degrees F. Capacitors (1) (1) Class... capacitor has no marked temperature limit, the maximum acceptable temperature will be assumed to be 65...
Environmental Monitoring, Water Quality - Total Maximum Daily Load (TMDL)
NSGIC GIS Inventory (aka Ramona) — The Clean Water Act Section 303(d) establishes the Total Maximum Daily Load (TMDL) program. The purpose of the TMDL program is to identify sources of pollution and...
PREDICTION OF MAXIMUM DRY DENSITY OF LOCAL GRANULAR ...
methods. A test on a soil of relatively high solid density revealed that the developed relation looses ... where, Pd max is the laboratory maximum dry ... Addis-Jinima Road Rehabilitation. ..... data sets that differ considerably in the magnitude.
Environmental Monitoring, Water Quality - Total Maximum Daily Load (TMDL)
NSGIC Education | GIS Inventory — The Clean Water Act Section 303(d) establishes the Total Maximum Daily Load (TMDL) program. The purpose of the TMDL program is to identify sources of pollution and...
Solar Panel Maximum Power Point Tracker for Power Utilities
Sandeep Banik,
2014-01-01
Full Text Available ―Solar Panel Maximum Power Point Tracker For power utilities‖ As the name implied, it is a photovoltaic system that uses the photovoltaic array as a source of electrical power supply and since every photovoltaic (PV array has an optimum operating point, called the maximum power point, which varies depending on the insolation level and array voltage. A maximum power point tracker (MPPT is needed to operate the PV array at its maximum power point. The objective of this thesis project is to build a photovoltaic (PV array Of 121.6V DC Voltage(6 cell each 20V, 100watt And convert the DC voltage to Single phase 120v,50Hz AC voltage by switch mode power converter‘s and inverter‘s.
A Family of Maximum SNR Filters for Noise Reduction
Huang, Gongping; Benesty, Jacob; Long, Tao;
2014-01-01
This paper is devoted to the study and analysis of the maximum signal-to-noise ratio (SNR) filters for noise reduction both in the time and short-time Fourier transform (STFT) domains with one single microphone and multiple microphones. In the time domain, we show that the maximum SNR filters can...... significantly increase the SNR but at the expense of tremendous speech distortion. As a consequence, the speech quality improvement, measured by the perceptual evaluation of speech quality (PESQ) algorithm, is marginal if any, regardless of the number of microphones used. In the STFT domain, the maximum SNR....... This demonstrates that the maximum SNR filters, particularly the multichannel ones, in the STFT domain may be of great practical value....
Maximum likelihood estimation of finite mixture model for economic data
Phoong, Seuk-Yen; Ismail, Mohd Tahir
2014-06-01
Finite mixture model is a mixture model with finite-dimension. This models are provides a natural representation of heterogeneity in a finite number of latent classes. In addition, finite mixture models also known as latent class models or unsupervised learning models. Recently, maximum likelihood estimation fitted finite mixture models has greatly drawn statistician's attention. The main reason is because maximum likelihood estimation is a powerful statistical method which provides consistent findings as the sample sizes increases to infinity. Thus, the application of maximum likelihood estimation is used to fit finite mixture model in the present paper in order to explore the relationship between nonlinear economic data. In this paper, a two-component normal mixture model is fitted by maximum likelihood estimation in order to investigate the relationship among stock market price and rubber price for sampled countries. Results described that there is a negative effect among rubber price and stock market price for Malaysia, Thailand, Philippines and Indonesia.
Why Does Bureaucratic Corruption Occur in the EU?
Brandt, Urs Steiner; Svendsen, Gert Tinggaard
2013-01-01
Why does bureaucratic corruption occur in the EU system? Several examples suggest that bureaucratic corruption exists and that the Commission’s anti-fraud agency, OLAF, is not a fully independent authority. We thus develop a novel interpretation of the principalsupervisor-agent model to cope...... with non-independent anti-fraud units. This model shows that corruption is likely to occur when the expected value to the client from bribing the agent is larger than the expected value to the principal of truth-telling by the supervisor. Overall, this analysis points to the risks of flawed incentives...
Factors affecting the depth of burns occurring in medical institutions.
Cho, Young Soon; Choi, Young Hwan; Yoon, Cheonjae; You, Je Sung
2015-05-01
Most cases of burns occurring in medical institutions are associated with activities involving heat. It is very difficult to detect these burns. To date, there are few reports on burns occurring in medical institutions. The purpose of this paper was to analyze the etiology of burns occurring in medical institutions and to elucidate the factors affecting burn depth. We conducted a retrospective analysis of the medical records of patients who visited our center from April 2008 to February 2013. This study enrolled all patients with burns occurring in the medical institution during or related to treatment. We excluded burn patients whose burns were not related to treatment (for example, we excluded patients with scalding burns that occurred in the hospital cafeteria and pediatric patients with hot water burns from the water purifier). However, patients with burns that occurred in the recovery room after general anesthesia were included. A total of 115 patients were enrolled in this study. The average patient age was 41.5 years, with more women than men (M:F=31:84). There were 29 cases (25.3%) of superficial burns (first-degree and superficial second-degree) and 86 cases (74.7%) of deep burns (deep second-degree and third-degree). Hot packs were the most common cause of burns (27 cases, 23.5%), followed by laser therapy, heating pads, and grounding pads, accounting for 15 cases each. There were 89 cases (77.4%) of contact burns and 26 cases (22.6%) of non-contact burns. The most common site of burns was the lower extremities (41 cases, 35.7%). The burn site and contact burns were both factors affecting burn depth. The rate of deep burns was higher in patients with contact burns than in those with non-contact burns (odds ratio 4.26) and was associated with lower body burns (odds ratio 2.85). In burns occurring in medical institutions, there is a high probability of a deep burn if it is a contact burn or occurs in the lower body. Therefore, safety guidelines are needed
Can spontaneous symmetry breaking occur in potential with one minimum?
Acus, A
2000-01-01
Spontaneous symmetry breaking occurs when the symmetry that a physical system possesses, is not preserved for the ground state of the system. Although the procedure of symmetry breaking is quite clear from the mathematical point of view, the physical interpretation of the phenomenon is worth to be better understood. In this note we present a simple and instructive example of the symmetry breaking in a mechanical system. It demonstrates that the spontaneous symmetry breaking can occur for the spatially extended solutions in a potential characterised by a single minimum.
Skin picking disorder with co-occurring body dysmorphic disorder
Grant, Jon E; Redden, Sarah A; Leppink, Eric W
2015-01-01
There is clinical overlap between skin picking disorder (SPD) and body dysmorphic disorder (BDD), but little research has examined clinical and cognitive correlates of the two disorders when they co-occur. Of 55 participants with SPD recruited for a neurocognitive study and two pharmacological...... studies, 16 (29.1%) had co-occurring BDD. SPD participants with and without BDD were compared to each other and to 40 healthy volunteers on measures of symptom severity, social functioning, and cognitive assessments using the Stop-signal task (assessing response impulsivity) and the Intra...
On the maximum sufficient range of interstellar vessels
Cartin, Daniel
2011-01-01
This paper considers the likely maximum range of space vessels providing the basis of a mature interstellar transportation network. Using the principle of sufficiency, it is argued that this range will be less than three parsecs for the average interstellar vessel. This maximum range provides access from the Solar System to a large majority of nearby stellar systems, with total travel distances within the network not excessively greater than actual physical distance.
Filtering Additive Measurement Noise with Maximum Entropy in the Mean
Gzyl, Henryk
2007-01-01
The purpose of this note is to show how the method of maximum entropy in the mean (MEM) may be used to improve parametric estimation when the measurements are corrupted by large level of noise. The method is developed in the context on a concrete example: that of estimation of the parameter in an exponential distribution. We compare the performance of our method with the bayesian and maximum likelihood approaches.
The maximum entropy production principle: two basic questions.
Martyushev, Leonid M
2010-05-12
The overwhelming majority of maximum entropy production applications to ecological and environmental systems are based on thermodynamics and statistical physics. Here, we discuss briefly maximum entropy production principle and raises two questions: (i) can this principle be used as the basis for non-equilibrium thermodynamics and statistical mechanics and (ii) is it possible to 'prove' the principle? We adduce one more proof which is most concise today.
A tropospheric ozone maximum over the equatorial Southern Indian Ocean
L. Zhang
2012-05-01
Full Text Available We examine the distribution of tropical tropospheric ozone (O_{3} from the Microwave Limb Sounder (MLS and the Tropospheric Emission Spectrometer (TES by using a global three-dimensional model of tropospheric chemistry (GEOS-Chem. MLS and TES observations of tropospheric O_{3} during 2005 to 2009 reveal a distinct, persistent O_{3} maximum, both in mixing ratio and tropospheric column, in May over the Equatorial Southern Indian Ocean (ESIO. The maximum is most pronounced in 2006 and 2008 and less evident in the other three years. This feature is also consistent with the total column O_{3} observations from the Ozone Mapping Instrument (OMI and the Atmospheric Infrared Sounder (AIRS. Model results reproduce the observed May O_{3} maximum and the associated interannual variability. The origin of the maximum reflects a complex interplay of chemical and dynamic factors. The O_{3} maximum is dominated by the O_{3} production driven by lightning nitrogen oxides (NO_{x} emissions, which accounts for 62% of the tropospheric column O_{3} in May 2006. We find the contribution from biomass burning, soil, anthropogenic and biogenic sources to the O_{3} maximum are rather small. The O_{3} productions in the lightning outflow from Central Africa and South America both peak in May and are directly responsible for the O_{3} maximum over the western ESIO. The lightning outflow from Equatorial Asia dominates over the eastern ESIO. The interannual variability of the O_{3} maximum is driven largely by the anomalous anti-cyclones over the southern Indian Ocean in May 2006 and 2008. The lightning outflow from Central Africa and South America is effectively entrained by the anti-cyclones followed by northward transport to the ESIO.
On the sufficiency of the linear maximum principle
Vidal, Rene Victor Valqui
1987-01-01
Presents a family of linear maximum principles for the discrete-time optimal control problem, derived from the saddle-point theorem of mathematical programming. Some simple examples illustrate the applicability of the main theoretical results......Presents a family of linear maximum principles for the discrete-time optimal control problem, derived from the saddle-point theorem of mathematical programming. Some simple examples illustrate the applicability of the main theoretical results...
Semidefinite Programming for Approximate Maximum Likelihood Sinusoidal Parameter Estimation
2009-01-01
We study the convex optimization approach for parameter estimation of several sinusoidal models, namely, single complex/real tone, multiple complex sinusoids, and single two-dimensional complex tone, in the presence of additive Gaussian noise. The major difficulty for optimally determining the parameters is that the corresponding maximum likelihood (ML) estimators involve finding the global minimum or maximum of multimodal cost functions because the frequencies are nonlinear in the observed s...
Hybrid TOA/AOA Approximate Maximum Likelihood Mobile Localization
Mohamed Zhaounia; Mohamed Adnan Landolsi; Ridha Bouallegue
2010-01-01
This letter deals with a hybrid time-of-arrival/angle-of-arrival (TOA/AOA) approximate maximum likelihood (AML) wireless location algorithm. Thanks to the use of both TOA/AOA measurements, the proposed technique can rely on two base stations (BS) only and achieves better performance compared to the original approximate maximum likelihood (AML) method. The use of two BSs is an important advantage in wireless cellular communication systems because it avoids hearability problems and reduces netw...
Oh, Hyeon-Ju; Jeong, Na-Na; Chi, Woo-Bae; Seo, Ji-Hoon; Jun, Si-Moon; Sohn, Jong-Ryeul
2015-10-01
Particulate matter (PM) in buildings are mostly sourced from the transport of outdoor particles through a heating, ventilation, and air conditioning (HVAC) system and generation of particle within the building itself. We investigated the concentrations and characteristic of indoor and outdoor particles and airborne bacteria concentrations across four floors of a building located in a high-traffic area. In all the floors we studied (first, second, fifth, and eighth), the average concentrations of particles less than 10 μm (PM10) in winter for were higher than those in summer. On average, a seasonal variation in the PM10 level was found for the first, fifth, and eighth floors, such that higher values occurred in the winter season, compared to the summer season. In addition, in winter, the indoor concentrations of PM10 on the first, fifth, and eighth floors were higher than those of the outdoor PM10. The maximum level of airborne bacteria concentration was found in a fifth floor office, which held a private academy school consisting of many students. Results indicated that the airborne bacteria remained at their highest concentration throughout the weekday period and varied by students' activity. The correlation coefficient (R (2)) and slope of linear approximation for the concentrations of particulate matter were used to evaluate the relationship between the indoor and outdoor particulate matter. These results can be used to predict both the indoor particle levels and the risk of personal exposure to airborne bacteria.
Adaption of an Antarctic lichen to Martian niche conditions can occur within 34 days
de Vera, J. P.; Schulze-Makuch, D.; Khan, A; Lorek, A.; Möhlmann, D.; T. Spohn
2014-01-01
Stresses occurring on the Martian surface were simulated in a Mars Simulation Chamber (MSC) and included high UV fluxes (Zarnecki andCatling,2002), low temperatures, low water activity, high atmospheric CO2 concentrations, and an atmospheric pressure of about 800Pa (Kasting, 1991; Head etal., 2003). The lichen Pleopsidium chlorophanum is an extremophile that lives in very cold, dry, high-altitude habitats, which are Earth's best approximation of the Martian surface. Samples with P.ch...
[Study on the maximum entropy principle and population genetic equilibrium].
Zhang, Hong-Li; Zhang, Hong-Yan
2006-03-01
A general mathematic model of population genetic equilibrium about one locus was constructed based on the maximum entropy principle by WANG Xiao-Long et al. They proved that the maximum solve of the model was just the frequency distribution that a population reached Hardy-Weinberg genetic equilibrium. It can suggest that a population reached Hardy-Weinberg genetic equilibrium when the genotype entropy of the population reached the maximal possible value, and that the frequency distribution of the maximum entropy was equivalent to the distribution of Hardy-Weinberg equilibrium law about one locus. They further assumed that the frequency distribution of the maximum entropy was equivalent to all genetic equilibrium distributions. This is incorrect, however. The frequency distribution of the maximum entropy was only equivalent to the distribution of Hardy-Weinberg equilibrium with respect to one locus or several limited loci. The case with regard to limited loci was proved in this paper. Finally we also discussed an example where the maximum entropy principle was not the equivalent of other genetic equilibria.
Suligowski, Roman
2014-05-01
Probable Maximum Precipitation based upon the physical mechanisms of precipitation formation at the Kielce Upland. This estimation stems from meteorological analysis of extremely high precipitation events, which occurred in the area between 1961 and 2007 causing serious flooding from rivers that drain the entire Kielce Upland. Meteorological situation has been assessed drawing on the synoptic maps, baric topography charts, satellite and radar images as well as the results of meteorological observations derived from surface weather observation stations. Most significant elements of this research include the comparison between distinctive synoptic situations over Europe and subsequent determination of typical rainfall generating mechanism. This allows the author to identify the source areas of air masses responsible for extremely high precipitation at the Kielce Upland. Analysis of the meteorological situations showed, that the source areas for humid air masses which cause the largest rainfalls at the Kielce Upland are the area of northern Adriatic Sea and the north-eastern coast of the Black Sea. Flood hazard at the Kielce Upland catchments was triggered by daily precipitation of over 60 mm. The highest representative dew point temperature in source areas of warm air masses (these responsible for high precipitation at the Kielce Upland) exceeded 20 degrees Celsius with a maximum of 24.9 degrees Celsius while precipitable water amounted to 80 mm. The value of precipitable water is also used for computation of factors featuring the system, namely the mass transformation factor and the system effectiveness factor. The mass transformation factor is computed based on precipitable water in the feeding mass and precipitable water in the source area. The system effectiveness factor (as the indicator of the maximum inflow velocity and the maximum velocity in the zone of front or ascending currents, forced by orography) is computed from the quotient of precipitable water in
Carriquiry, José; Sanchez, Alberto; Leduc, Guillaume
2015-01-01
International audience; The oxygen and carbon isotopic compositions of benthic foraminiferal tests were measured on sedimentary sequences retrieved on the Magdalena Margin, off southern Baja California, Mexico. We reconstruct the hydrographic changes along the water column that occurred in the northeastern tropical Pacific since the Last Glacial Maximum (LGM) and compare those changes to the ones that occurred in the northwest Pacific (NWP, i.e., off Japan and Russia), in the northeast Pacifi...
CLEARANCE OF INDOMETHACIN OCCURS PREDOMINANTLY BY RENAL GLUCURONIDATION
MOOLENAAR, F; CRANCRINUS, S; VISSER, J; DEZEEUW, D; MEIJER, DKF
1992-01-01
In this report we describe the conditions of collection, storage and handling of urine samples, collected after oral dosing with indometacin in man, in order to maintain the integrity of the labile glucuronide formed. We found that the body clearance occurs predominantly by renal metabolism, due to
Disseminated Fusariosis Occurring in Two Patients Despite Posaconazole Prophylaxis▿
Bose, Prithviraj; Parekh, Hiral D.; Holter, Jennifer L.; Greenfield, Ronald A.
2011-01-01
Posaconazole is widely used for prophylaxis against invasive fungal infections in patients undergoing myeloablative therapy. Disseminated fusariosis is a serious invasive mold infection in such patients. Preclinical and clinical studies indicate activity of posaconazole against Fusarium. We describe two cases of disseminated fusariosis that occurred despite posaconazole prophylaxis.
Naturally occurring fatty acids: source, chemistry and uses
Natural occurring fatty acids are a large and complex class of compounds found in plants and animals. Fatty acids are abundant and of interest because of their renewability, biodegradability, biocompatibility, low cost, and fascinating chemistry. Of the many fatty acids, only 20-25 of them are widel...
Selective extraction of naturally occurring radioactive Ra2+
van Leeuwen, F.W.B.; Verboom, Willem; Reinhoudt, David
2005-01-01
Organic extractants play a significant role in the selective removal of radioactive cations from waste streams. Although, literature on the selective removal of man-made radioactive material such as Americium (Am) is widespread, the selective removal of naturally occurring radioactive material such
Resolving the Diaporthe species occurring on soybean in Croatia
Santos, J.M.; Vrandečić, K.; Ćosić, J.; Duvnjak, T.; Phillips, A.J.L.
2012-01-01
Diaporthe (anamorph = Phomopsis) species are plant pathogens and endophytes on a wide range of hosts including economically important crops. At least four Diaporthe taxa occur on soybean and they are responsible for serious diseases and significant yield losses. Although several studies have extensi
Integrative Priming Occurs Rapidly and Uncontrollably during Lexical Processing
Estes, Zachary; Jones, Lara L.
2009-01-01
Lexical priming, whereby a prime word facilitates recognition of a related target word (e.g., "nurse" [right arrrow] "doctor"), is typically attributed to association strength, semantic similarity, or compound familiarity. Here, the authors demonstrate a novel type of lexical priming that occurs among unassociated, dissimilar,…
Botteri's Sparrow (Peucaea botterii) Occurs in Northern Coahuila, Mexico
van Els, Paul; Canales-del-Castillo, Ricardo; Klicka, John
2011-01-01
Botteri’s Sparrow (Peucaea botterii) occurs widely in the shrub-grasslands of southern North America. We report a breeding population of the species in the Sierra de la Encantada of northern Coahuila, Mexico, ,80 km from the Big Bend area of Texas and .300 km from the nearest previously known breedi
An unusual clinical presentation of eccrine poroma occurring on the auricle
Myong Il Bae
2015-01-01
Full Text Available Eccrine poromas are benign, slow-growing, solitary tumors originating from the intraepidermal portion of eccrine sweat ducts. Approximately 65% of these tumors occur on the soles of the feet, while 10% occur on the hands where a high concentration of eccrine sweat glands exists. Less frequently it occurs in other sites such as neck, chest, forehead, nose, and scalp with sporadic occurrences. A 43-year-old Korean female presented with a mass on her right auricle, which had been present for 5 years. The mass increased gradually in size with pain, oozing, and bleeding. A biopsy of the mass revealed monomorphic basaloid cells, which may extend into the underlying dermis, in a richly vascularized stroma, with a variable number of cystic or ductal structures. The patient was diagnosed as having eccrine poroma. In this case, the eccrine poroma showed unusual clinical presentation.
Evaluating the time limit at maximum aerobic speed in elite swimmers. Training implications.
Renoux, J C
2001-12-01
The aim of the present study was to make use of the concepts of maximum aerobic speed (MAS) and time limit (tlim) in order to determine the relationship between these two elements, and this in an attempt to significantly improve both speed and swimming performance during a training season. To this same end, an intermittent training model was used, which was adapted to the value obtained for the time limit at maximum aerobic speed. During a 12 week training period, the maximum aerobic speed for a group of 9 top-ranking varsity swimmers was measured on two occasions, as was the tlim. The values generated indicated that: 1) there was an inverse relationship between MAS and the time this speed could be maintained, thus confirming the studies by Billat et al. (1994b); 2) a significant increase in MAS occurred over the 12 week period, although no such evolution was seen for the tlim; 3) there was an improvement in results; 4) the time limit could be used in designing a training program based on intermittent exercises. In addition, results of the present study should allow swimming coaches to draw up individualized training programs for a given swimmer by taking into consideration maximum aerobic speed, time limit and propelling efficiency.
Bogdan Lewczuk
2014-01-01
Full Text Available The ovine pineal is generally considered as an interesting model for the study on adrenergic regulation of melatonin secretion due to some functional similarities with this gland in the human. The present investigations, performed in the superfusion culture of pineal explants, demonstrated that the norepinephrine-induced elevation of melatonin secretion in ovine pinealocytes comprised of two subsequent periods: a rapid increase phase and a slow increase phase. The first one included the quick rise in release of N-acetylserotonin and melatonin, occurring parallel to elevation of NE concentration in the medium surrounding explants. This rapid increase phase was not affected by inhibition of translation. The second, slow increase phase began after NE level had reached the maximum concentration in the culture medium and lasted about two hours. It was completely abolished by the treatment with translation inhibitors. The obtained results showed for the first time that the regulation of N-acetylserotonin synthesis in pinealocytes of some species like the sheep involves the on/off mechanism, which is completely independent of protein synthesis and works very fast. They provided strong evidence pointing to the need of revision of the current opinion that arylalkylamines N-acetyltransferase activity in pinealocytes is controlled exclusively by changes in enzyme abundance.
Richard L. Andersson
2014-09-01
Full Text Available A new type of antimicrobial, biocompatible and toughness enhanced ultra-thin fiber mats for biomedical applications is presented. The tough and porous fiber mats were obtained by electrospinning solution-blended poly (methyl methacrylate (PMMA and polyethylene oxide (PEO, filled with up to 25 wt % of Lanasol—a naturally occurring brominated cyclic compound that can be extracted from red sea algae. Antibacterial effectiveness was tested following the industrial Standard JIS L 1902 and under agitated medium (ASTM E2149. Even at the lowest concentrations of Lanasol, 4 wt %, a significant bactericidal effect was seen with a 4-log (99.99% reduction in bacterial viability against S. aureus, which is one of the leading causes of hospital-acquired (nosocomial infections in the world. The mechanical fiber toughness was insignificantly altered up to the maximum Lanasol concentration tested, and was for all fiber mats orders of magnitudes higher than electrospun fibers based on solely PMMA. This antimicrobial fiber system, relying on a dissolved antimicrobial agent (demonstrated by X-ray diffraction and Infrared (IR-spectroscopy rather than a dispersed and “mixed-in” solid antibacterial particle phase, presents a new concept which opens the door to tougher, stronger and more ductile antimicrobial fibers.
Chronic eccentric cycling improves quadriceps muscle structure and maximum cycling power.
Leong, C H; McDermott, W J; Elmer, S J; Martin, J C
2014-06-01
An interesting finding from eccentric exercise training interventions is the presence of muscle hypertrophy without changes in maximum concentric strength and/or power. The lack of improvements in concentric strength and/or power could be due to long lasting suppressive effects on muscle force production following eccentric training. Thus, improvements in concentric strength and/or power might not be detected until muscle tissue has recovered (e. g., several weeks post-training). We evaluated alterations in muscular structure (rectus-femoris, RF, and vastus lateralis, VL, thickness and pennation angles) and maximum concentric cycling power (Pmax) 1-week following 8-weeks of eccentric cycling training (2×/week; 5-10.5 min; 20-55% of Pmax). Pmax was assessed again at 8-weeks post-training. At 1 week post-training, RF and VL thickness increased by 24±4% and 13±2%, respectively, and RF and VL pennation angles increased by 31±4% and 13±1%, respectively (all Peccentric cycling can be a time-effective intervention for improving muscular structure and function in the lower body of healthy individuals. The larger Pmax increase detected at 8-weeks post-training implies that sufficient recovery might be necessary to fully detect changes in muscular power after eccentric cycling training.
The characteristics of gas hydrates occurring in natural environment
Lu, H.; Moudrakovski, I.; Udachin, K.; Enright, G.; Ratcliffe, C.; Ripmeester, J.
2009-12-01
In the past few years, extensive analyses have been carried out for characterizing the natural gas hydrate samples from Cascadia, offshore Vancouver Island; Mallik, Mackenzie Delta; Mount Elbert, Alaska North Slope; Nankai Trough, offshore Japan; Japan Sea and offshore India. With the results obtained, it is possible to give a general picture of the characteristics of gas hydrates occurring in natural environment. Gas hydrate can occur in sediments of various types, from sands to clay, although it is preferentially enriched in sediments of certain types, for example coarse sands and fine volcanic ash. Most of the gas hydrates in sediments are invisible, occurring in the pores of the sediments, while some hydrates are visible, appearing as massive, nodular, planar, vein-like forms and occurring around the seafloor, in the fractures related to fault systems, or any other large spaces available in sediments. Although methane is the main component of most of the natural gas hydrates, C2 to C7 hydrocarbons have been recognized in hydrates, sometimes even in significant amounts. Shallow marine gas hydrates have been found generally to contain minor amounts of hydrogen sulfide. Gas hydrate samples with complex gas compositions have been found to have heterogeneous distributions in composition, which might reflect changes in the composition of the available gas in the surrounding environment. Depending on the gas compositions, the structure type of a natural gas hydrate can be structure I, II or H. For structure I methane hydrate, the large cages are almost fully occupied by methane molecules, while the small cages are only partly occupied. Methane hydrates occurring in different environments have been identified with almost the same crystallographic parameters.
A reconnaissance study of radon concentration in Hamadan city, Iran.
Gillmore, G. K.; Jabari Vasal, Naghi
2009-04-01
This paper presents results of a reconnaissance study that used CR-39 alpha track-etch detectors to measure radon concentrations in dwellings in Hamadan, western Iran, significantly, built on permeable alluvial fan deposits. The indoor radon levels recorded varied from 4 to 364 Bq/m3 with a mean value of 107.87 Bq/m3 which is 2.5 times the average global population-weighted indoor radon concentration - these data augment the very few published studies on indoor radon levels in Iran. The maximum radon concentration in Hamadan occurs during the winter period (January to March) with lower concentrations during the autumn. The effective dose equivalent to the population in Hamadan is estimated from this reconnaissance study to be in the region of 2.7 mSv/y, which is above the guidelines for dose to a member of the public of 1 mSv/y suggested by the International Commission on Radiological Protection (ICRP) in 1993, although further work is required to confirm these results. This study supports other work in a number of countries that indicates such permeable 'surficial' deposits as being of intermediate to high radon potential. In western Iran, the presence of hammered clay floors, the widespread presence of excavated qanats to distribute water underground, the textural properties of surficial deposits and human behaviour intended to cope with winds are likely to be important factors influencing radon concentrations in older buildings. Keywords: Radon; health; dwellings; clay floors; alluvial fan; surficial geology; Hamadan; Iran
Maziero, G C; Baunwart, C; Toledo, M C
2001-05-01
The theoretical maximum daily intakes (TMDI) of the phenolic antioxidants butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT) and tertbutyl hydroquinone (TBHQ) in Brazil were estimated using food consumption data derived from a household economic survey and a packaged goods market survey. The estimates were based on maximum levels of use of the food additives specified in national food standards. The calculated intakes of the three additives for the mean consumer were below the ADIs. Estimates of TMDI for BHA, BHT and TBHQ ranged from 0.09 to 0.15, 0.05 to 0.10 and 0.07 to 0.12 mg/kg of body weight, respectively. To check if the additives are actually used at their maximum authorized levels, analytical determinations of these compounds in selected food categories were carried out using HPLC with UV detection. BHT and TBHQ concentrations in foodstuffs considered to be representive sources of these antioxidants in the diet were below the respective maximum permitted levels. BHA was not detected in any of the analysed samples. Based on the maximal approach and on the analytical data, it is unlikely that the current ADI of BHA (0.5 mg/kg body weight), BHT (0.3 mg/kg body weight) and TBHQ (0.7 mg/kg body weight) will be exceeded in practice by the average Brazilian consumer.
Bravo, J. L [Instituto de Geofisica, UNAM, Mexico, D.F. (Mexico); Nava, M. M [Instituto Mexicano del Petroleo, Mexico, D.F. (Mexico); Gay, C [Centro de Ciencias de la Atmosfera, UNAM, Mexico, D.F. (Mexico)
2001-07-01
We developed a procedure to forecast, with 2 or 3 hours, the daily maximum of surface ozone concentrations. It involves the adjustment of Autoregressive Integrated and Moving Average (ARIMA) models to daily ozone maximum concentrations at 10 monitoring atmospheric stations in Mexico City during one-year period. A one-day forecast is made and it is adjusted with the meteorological and solar radiation information acquired during the first 3 hours before the occurrence of the maximum value. The relative importance for forecasting of the history of the process and of meteorological conditions is evaluated. Finally an estimate of the daily probability of exceeding a given ozone level is made. [Spanish] Se aplica un procedimiento basado en la metodologia conocida como ARIMA, para predecir, con 2 o 3 horas de anticipacion, el valor maximo de la concentracion diaria de ozono. Esta basado en el calculo de autorregresiones y promedios moviles aplicados a los valores maximos de ozono superficial provenientes de 10 estaciones de monitoreo atmosferico en la Ciudad de Mexico y obtenidos durante un ano de muestreo. El pronostico para un dia se ajusta con la informacion meteorologica y de radiacion solar correspondiente a un periodo que antecede con al menos tres horas la ocurrencia esperada del valor maximo. Se compara la importancia relativa de la historia del proceso y de las condiciones meteorologicas previas para el pronostico. Finalmente se estima la probabilidad diaria de que un nivel normativo o preestablecido para contingencias de ozono sea rebasado.
周自强; 方守狮; 冯锋
2003-01-01
It is important to know the maximum solid solubility(Cmax) of various transition metals in a metal when one designs multi-component alloys. There have been several semi-empirical approaches to qualitatively predict the Cmax, such as Darken-Gurry(D-G) theorem, Miedema-Chelikowsky(M-C) theorem, electron concentration rule and the bond-parameter rule. However, they are not particularly valid for the prediction of Cmax. It was developed on the basis of energetics of alloys as a new method to predict Cmax of different transition metals in metal Ti, which can be described as a semi-empirical equation using the atomic parameters, i e, electronegativity difference, atomic diameter and electron concentration. It shows that the present method can be used to explain and deduce D-G theorem, M-C theorem and electron concentration rule.
Immunoregulation by naturally occurring and disease-associated autoantibodies
Nielsen, Claus H; Bendtzen, Klaus
2012-01-01
-receptors on antigen-presenting cells and thereby regulate T-cell activity. Knowledge of the influence of NAbs against cytokines on immune homeostasis is likely to have wide-ranging implications both in understanding pathogenesis and in treatment of many immunoinflammatory disorders, including a number of autoimmune......The role of naturally occurring autoantibodies (NAbs) in homeostasis and in disease manifestations is poorly understood. In the present chapter, we review how NAbs may interfere with the cytokine network and how NAbs, through formation of complement-activating immune complexes with soluble self......-antigens, may promote the uptake and presentation of self-molecules by antigen-presenting cells. Both naturally occurring and disease-associated autoantibodies against a variety of cytokines have been reported, including NAbs against interleukin (IL)-1α, IL-6, IL-8, IL-10, granulocyte-macrophage colony...
Individual Module Maximum Power Point Tracking for Thermoelectric Generator Systems
Vadstrup, Casper; Schaltz, Erik; Chen, Min
2013-07-01
In a thermoelectric generator (TEG) system the DC/DC converter is under the control of a maximum power point tracker which ensures that the TEG system outputs the maximum possible power to the load. However, if the conditions, e.g., temperature, health, etc., of the TEG modules are different, each TEG module will not produce its maximum power. If each TEG module is controlled individually, each TEG module can be operated at its maximum power point and the TEG system output power will therefore be higher. In this work a power converter based on noninverting buck-boost converters capable of handling four TEG modules is presented. It is shown that, when each module in the TEG system is operated under individual maximum power point tracking, the system output power for this specific application can be increased by up to 8.4% relative to the situation when the modules are connected in series and 16.7% relative to the situation when the modules are connected in parallel.
Size dependence of efficiency at maximum power of heat engine
Izumida, Y.
2013-10-01
We perform a molecular dynamics computer simulation of a heat engine model to study how the engine size difference affects its performance. Upon tactically increasing the size of the model anisotropically, we determine that there exists an optimum size at which the model attains the maximum power for the shortest working period. This optimum size locates between the ballistic heat transport region and the diffusive heat transport one. We also study the size dependence of the efficiency at the maximum power. Interestingly, we find that the efficiency at the maximum power around the optimum size attains a value that has been proposed as a universal upper bound, and it even begins to exceed the bound as the size further increases. We explain this behavior of the efficiency at maximum power by using a linear response theory for the heat engine operating under a finite working period, which naturally extends the low-dissipation Carnot cycle model [M. Esposito, R. Kawai, K. Lindenberg, C. Van den Broeck, Phys. Rev. Lett. 105, 150603 (2010)]. The theory also shows that the efficiency at the maximum power under an extreme condition may reach the Carnot efficiency in principle.© EDP Sciences Società Italiana di Fisica Springer-Verlag 2013.
How long do centenarians survive? Life expectancy and maximum lifespan.
Modig, K; Andersson, T; Vaupel, J; Rau, R; Ahlbom, A
2017-08-01
The purpose of this study was to explore the pattern of mortality above the age of 100 years. In particular, we aimed to examine whether Scandinavian data support the theory that mortality reaches a plateau at particularly old ages. Whether the maximum length of life increases with time was also investigated. The analyses were based on individual level data on all Swedish and Danish centenarians born from 1870 to 1901; in total 3006 men and 10 963 women were included. Birth cohort-specific probabilities of dying were calculated. Exact ages were used for calculations of maximum length of life. Whether maximum age changed over time was analysed taking into account increases in cohort size. The results confirm that there has not been any improvement in mortality amongst centenarians in the past 30 years and that the current rise in life expectancy is driven by reductions in mortality below the age of 100 years. The death risks seem to reach a plateau of around 50% at the age 103 years for men and 107 years for women. Despite the rising life expectancy, the maximum age does not appear to increase, in particular after accounting for the increasing number of individuals of advanced age. Mortality amongst centenarians is not changing despite improvements at younger ages. An extension of the maximum lifespan and a sizeable extension of life expectancy both require reductions in mortality above the age of 100 years. © 2017 The Association for the Publication of the Journal of Internal Medicine.
Predicting species' maximum dispersal distances from simple plant traits.
Tamme, Riin; Götzenberger, Lars; Zobel, Martin; Bullock, James M; Hooftman, Danny A P; Kaasik, Ants; Pärtel, Meelis
2014-02-01
Many studies have shown plant species' dispersal distances to be strongly related to life-history traits, but how well different traits can predict dispersal distances is not yet known. We used cross-validation techniques and a global data set (576 plant species) to measure the predictive power of simple plant traits to estimate species' maximum dispersal distances. Including dispersal syndrome (wind, animal, ant, ballistic, and no special syndrome), growth form (tree, shrub, herb), seed mass, seed release height, and terminal velocity in different combinations as explanatory variables we constructed models to explain variation in measured maximum dispersal distances and evaluated their power to predict maximum dispersal distances. Predictions are more accurate, but also limited to a particular set of species, if data on more specific traits, such as terminal velocity, are available. The best model (R2 = 0.60) included dispersal syndrome, growth form, and terminal velocity as fixed effects. Reasonable predictions of maximum dispersal distance (R2 = 0.53) are also possible when using only the simplest and most commonly measured traits; dispersal syndrome and growth form together with species taxonomy data. We provide a function (dispeRsal) to be run in the software package R. This enables researchers to estimate maximum dispersal distances with confidence intervals for plant species using measured traits as predictors. Easily obtainable trait data, such as dispersal syndrome (inferred from seed morphology) and growth form, enable predictions to be made for a large number of species.
Prediction of three dimensional maximum isometric neck strength.
Fice, Jason B; Siegmund, Gunter P; Blouin, Jean-Sébastien
2014-09-01
We measured maximum isometric neck strength under combinations of flexion/extension, lateral bending and axial rotation to determine whether neck strength in three dimensions (3D) can be predicted from principal axes strength. This would allow biomechanical modelers to validate their neck models across many directions using only principal axis strength data. Maximum isometric neck moments were measured in 9 male volunteers (29±9 years) for 17 directions. The 3D moments were normalized by the principal axis moments, and compared to unity for all directions tested. Finally, each subject's maximum principal axis moments were used to predict their resultant moment in the off-axis directions. Maximum moments were 30±6 N m in flexion, 32±9 N m in lateral bending, 51±11 N m in extension, and 13±5 N m in axial rotation. The normalized 3D moments were not significantly different from unity (95% confidence interval contained one), except for three directions that combined ipsilateral axial rotation and lateral bending; in these directions the normalized moments exceeded one. Predicted resultant moments compared well to the actual measured values (r2=0.88). Despite exceeding unity, the normalized moments were consistent across subjects to allow prediction of maximum 3D neck strength using principal axes neck strength.
Probiotic properties of yeasts occurring in fermented food and beverages
Jespersen, Lene
Besides being able to improve the quality and safety of many fermented food and beverages some yeasts offer a number of probiotic traits. Especially a group of yeast referred to as "Saccharomyces boulardii", though taxonomically belonging to Saccharomyces cerevisiae, has been claimed to have...... probiotic properties. Besides, yeasts naturally occurring globally in food and beverages will have traits that might have a positive impact on human health....
Sensory-motor transformations for speech occur bilaterally.
Cogan, Gregory B; Thesen, Thomas; Carlson, Chad; Doyle, Werner; Devinsky, Orrin; Pesaran, Bijan
2014-03-01
Historically, the study of speech processing has emphasized a strong link between auditory perceptual input and motor production output. A kind of 'parity' is essential, as both perception- and production-based representations must form a unified interface to facilitate access to higher-order language processes such as syntax and semantics, believed to be computed in the dominant, typically left hemisphere. Although various theories have been proposed to unite perception and production, the underlying neural mechanisms are unclear. Early models of speech and language processing proposed that perceptual processing occurred in the left posterior superior temporal gyrus (Wernicke's area) and motor production processes occurred in the left inferior frontal gyrus (Broca's area). Sensory activity was proposed to link to production activity through connecting fibre tracts, forming the left lateralized speech sensory-motor system. Although recent evidence indicates that speech perception occurs bilaterally, prevailing models maintain that the speech sensory-motor system is left lateralized and facilitates the transformation from sensory-based auditory representations to motor-based production representations. However, evidence for the lateralized computation of sensory-motor speech transformations is indirect and primarily comes from stroke patients that have speech repetition deficits (conduction aphasia) and studies using covert speech and haemodynamic functional imaging. Whether the speech sensory-motor system is lateralized, like higher-order language processes, or bilateral, like speech perception, is controversial. Here we use direct neural recordings in subjects performing sensory-motor tasks involving overt speech production to show that sensory-motor transformations occur bilaterally. We demonstrate that electrodes over bilateral inferior frontal, inferior parietal, superior temporal, premotor and somatosensory cortices exhibit robust sensory-motor neural
A Stochastical Model for the Earthquake Occurences in Turkey
Gamze ÖZEL
2009-04-01
Full Text Available The fields of seismology and earthquake engineering deal with the studies for earthquake predictions, hazard assessments and the prevention of possible damage due to destructive earthquakes. Various kind of statistical models are used for the earthquake occurences. The most familiar model is a Poisson process for random series of events. However, the Poisson process is insufficient if the incorporation of more information about the seismic process is required. Recently, a compound Poisson process has been proposed an alternative to the Poisson process for the earthquake analysis. In this study, the compound Poisson process is introduced and the probabilities of earthquake numbers with magnitude M ³ 5.0 which will occur within 3 and 6 months; 5 and 10 years have been obtained for Turkey from the Poisson process. Then, it is shown that the aftershock sequences follow a geometric distribution. By this way, the probabilities of total number of aftershocks which will occur within one year and two years with magnitude M ³ 4.0 in Turkey are obtained from the compound Poisson process. Finally, the expected values of main shocks and total number of aftershocks which will occur within one year and two years are computed. The results show that the earthquake occurrence probability with magnitude M ³ 5.0 increases, whereas the probability of total number of aftershocks with magnitude M ³ 4.0 decreases in Turkey as the time increases. Besides, the total aftershock number with magnitude M ³ 4.0 , after a main shock with magnitude M ³ 5.0, equals to zero with the probability 0.48 within one year. The findings also indicate that approximately 130 main shocks with M ³ 5.0 , 28 aftershocks with magnitude M ³ 4.0 are expected within 30 years in Turkey.
Filtering, control and fault detection with randomly occurring incomplete information
Dong, Hongli; Gao, Huijun
2013-01-01
This book investigates the filtering, control and fault detection problems for several classes of nonlinear systems with randomly occurring incomplete information. It proposes new concepts, including RVNs, ROMDs, ROMTCDs, and ROQEs. The incomplete information under consideration primarily includes missing measurements, time-delays, sensor and actuator saturations, quantization effects and time-varying nonlinearities. The first part of this book focuses on the filtering, control and fault detection problems for several classes of nonlinear stochastic discrete-time systems and
Naturally occurring pentaoxygenated, hexaoxygenated and dimeric xanthones: a literature survey
V. Peres
1997-08-01
Full Text Available This review gives information on the chemical study of 71 pentaoxygenated, 11 hexaoxygenated and 9 dimeric and more complex xanthones naturally occurring in 7 families, 29 genus and 62 species of higher plants, and 11 described as fern and fungal metabolites. The value of these groups of substances in the connection with the pharmacological activity and the therapeutic use of some species is shown. The structural formulas of 23 isolated compounds and their distribution in the species studied are given.
The effects of naturally occurring impurities in rock salt
Alina-Mihaela Badescu; Alexandra Saftoiu
2014-09-01
In this paper we investigate the effect that naturally occurring impurities in salt mines have both on effective permittivity of the medium and on radio wave propagation at ∼200 MHz. The effective permittivity is determined based on the dielectric properties of salt and the characteristics of the main impurities. We conclude that at such frequencies the scattering is negligible compared to absorptions. The effect of trapped water in different forms is also evaluated.
Interaction of Siglec-4 with naturally occurring and synthetic glycoconjugates
Koliwer-Brandl, Hendrik
2011-01-01
The aim of this work has been to provide insights into the structure-function relationship of Siglec-4 binding naturally occurring sialic acids as well as synthetic sialic acid derivatives. Structural information of the Siglec binding site and its interactions with glycoconjugates were obtained from homology modeling of the sialic acid binding domain and molecular docking calculations with several sialosides. Furthermore, the interaction of chemically synthesized sialic acid derivatives with ...
Myelodysplastic Syndrome Occurring in a Patient with Gorlin Syndrome.
Mull, Jamie L; Madden, Lisa M; Bayliss, Susan J
2016-07-01
We report a case of myelodysplastic syndrome (MDS) occurring in an African American boy with Gorlin syndrome with a novel PTCH1 mutation. Before developing MDS, the patient had been treated with chemotherapy and radiation for a medulloblastoma. He received a bone marrow transplant for the MDS and eventually died of treatment complications. Secondary hematologic malignancies are a known complication of certain chemotherapeutics, although whether a patient with Gorlin syndrome has a greater propensity for the development of such malignancies is unclear.
Hepatocellular carcinoma occurring in a Crohn’s disease patient
Mitsuaki; Ishida; Shigeyuki; Naka; Hisanori; Shiomi; Tomoyuki; Tsujikawa; Akira; Andoh; Tamio; Nakahara; Yasuharu; Saito; Yoshi-hide; Fujiyama; Mikiko; Takikita-Suzuki; Fumiyoshi; Kojima; Machiko; Hotta; Tohru; Tani; Yoshimasa; Kurumi; Hidetoshi; Okabe
2010-01-01
We report a case of hepatocellular carcinoma (HCC) occurring in a patient with Crohn’s disease (CD) without chronic hepatitis or liver cirrhosis, and review the clinicopathological features of HCC in CD patients. A 37-year-old Japanese man with an 8-year history of CD and a medication history of azathioprine underwent resection of a liver tumor. The histopathology of the liver tumor was pseudoglandular type HCC. In the nonneoplastic liver, focal hepatocyte glycogenosis (FHG) was observed, however, there was...
Kanner, Andrew A; Neyman, Gennady; Suh, John H; Weinhous, Martin S; Lee, Shih-Yuan; Barnett, Gene H
2004-01-01
Gamma knife (GK) radiosurgery for trigeminal neuralgia (TN) has been effective in 50-80% of cases when using a single 4-mm collimator and a maximum dose of 60-90 Gy. Attempting to improve the response rate by increasing the dose may lead to increased risk of facial numbness or disturbed sensation. Combined use of 4- and 8-mm collimators results in a larger target volume, which would potentially treat a larger region of the nerve without increasing the maximum dose. One hundred-one patients suffering from medically refractory TN were evaluated. Fifty-four were treated with a single shot using a 4-mm helmet and 47 with concentrically aimed, equally weighted 4- and 8-mm helmets. 75 Gy were prescribed to the 100% isodose line (using a 4-mm helmet output factor of 0.80) in all cases. The outcome was assessed by interview or outpatient visit. An excellent/good response was seen in 57.8 vs. 71.4%, respectively, with a partial response of 13.3 vs. 2.3%, respectively (p > 0.05). Pain recurrence occurred in 28.6 vs. 23.2%, respectively (p > 0.05). The use of a combined concentric 4- and 8-mm collimator treatment for medically refractory TN at a maximum dose of 75 Gy does not improve outcome as compared with a single 4-mm collimator with an equivalent maximum dose. Copyright 2004 S. Karger AG, Basel
Naturally Occurring Anthraquinones: Chemistry and Therapeutic Potential in Autoimmune Diabetes
Shih-Chang Chien
2015-01-01
Full Text Available Anthraquinones are a class of aromatic compounds with a 9,10-dioxoanthracene core. So far, 79 naturally occurring anthraquinones have been identified which include emodin, physcion, cascarin, catenarin, and rhein. A large body of literature has demonstrated that the naturally occurring anthraquinones possess a broad spectrum of bioactivities, such as cathartic, anticancer, anti-inflammatory, antimicrobial, diuretic, vasorelaxing, and phytoestrogen activities, suggesting their possible clinical application in many diseases. Despite the advances that have been made in understanding the chemistry and biology of the anthraquinones in recent years, research into their mechanisms of action and therapeutic potential in autoimmune disorders is still at an early stage. In this paper, we briefly introduce the etiology of autoimmune diabetes, an autoimmune disorder that affects as many as 10 million worldwide, and the role of chemotaxis in autoimmune diabetes. We then outline the chemical structure and biological properties of the naturally occurring anthraquinones and their derivatives with an emphasis on recent findings about their immune regulation. We discuss the structure and activity relationship, mode of action, and therapeutic potential of the anthraquinones in autoimmune diabetes, including a new strategy for the use of the anthraquinones in autoimmune diabetes.
Evolution of virulence when transmission occurs before disease.
Osnas, Erik E; Dobson, Andrew P
2010-08-23
Most models of virulence evolution assume that transmission and virulence are constant during an infection. In many viral (HIV and influenza), bacterial (TB) and prion (BSE and CWD) systems, disease-induced mortality occurs long after the host becomes infectious. Therefore, we constructed a model with two infected classes that differ in transmission rate and virulence in order to understand how the evolutionarily stable strategy (ESS) depends on the relative difference in transmission and virulence between classes, on the transition rate between classes and on the recovery rate from the second class. We find that ESS virulence decreases when expressed early in the infection or when transmission occurs late in an infection. When virulence occurred relatively equally in each class and there was disease recovery, ESS virulence increased with increased transition rate. In contrast, ESS virulence first increased and then decreased with transition rate when there was little virulence early in the infection and a rapid recovery rate. This model predicts that ESS virulence is highly dependent on the timing of transmission and pathology after infection; thus, pathogen evolution may either increase or decrease virulence after emergence in a new host.
Percutaneous treatment of complications occurring during hemodialysis graft recanalization
Sofocleous, Constantinos T. E-mail: constant@pol.net; Schur, Israel; Koh, Elsie; Hinrichs, Clay; Cooper, Stanley G.; Welber, Adam; Brountzos, Elias; Kelekis, Dimitris
2003-09-01
Introduction/objective: To describe and evaluate percutaneous treatment methods of complications occurring during recanalization of thrombosed hemodialysis access grafts. Methods and materials: A retrospective review of 579 thrombosed hemodialysis access grafts revealed 48 complications occurring during urokinase thrombolysis (512) or mechanical thrombectomy (67). These include 12 venous or venous anastomotic ruptures not controlled by balloon tamponade, eight arterial emboli, 12 graft extravasations, seven small hematomas, four intragraft pseudointimal 'dissections', two incidents of pulmonary edema, one episode of intestinal angina, one procedural death, and one distant hematoma. Results: Twelve cases of post angioplasty ruptures were treated with uncovered stents of which 10 resulted in graft salvage allowing successful hemodialysis. All arterial emboli were retrieved by Fogarty or embolectomy balloons. The 10/12 graft extravasations were successfully treated by digital compression while the procedure was completed and the graft flow was restored. Dissections were treated with prolonged Percutaneous Trasluminal Angioplasty (PTA) balloon inflation. Overall technical success was 39/48 (81%). Kaplan-Meier Primary and secondary patency rates were 72 and 78% at 30, 62 and 73% at 90 and 36 and 67% at 180 days, respectively. Secondary patency rates remained over 50% at 1 year. There were no additional complications caused by these maneuvers. Discussions and conclusion: The majority of complications occurring during percutaneous thrombolysis/thrombectomy of thrombosed access grafts, can be treated at the same sitting allowing completion of the recanalization procedure and usage of the same access for hemodialysis.
High-resolution interpolar difference of atmospheric methane around the Last Glacial Maximum
Baumgartner, M.; Schilt, A.; Eicher, O.; Schmitt, J.; Schwander, J.; Spahni, R.; Fischer, H.; Stocker, T. F.
2012-10-01
Reconstructions of past atmospheric methane concentrations are available from ice cores from both Greenland and Antarctica. The difference observed between the two polar methane concentration levels represents a valuable constraint on the geographical location of the methane sources. Here we present new high-resolution methane records from the North Greenland Ice Core Project (NGRIP) and the European Project for Ice Coring in Antarctica (EPICA) Dronning Maud Land (EDML) ice cores covering Termination 1, the Last Glacial Maximum, and parts of the last glacial back to 32 000 years before present. Due to the high resolution of the records, the synchronisation between the ice cores from NGRIP and EDML is considerably improved, and the interpolar concentration difference of methane is determined with unprecedented precision and temporal resolution. Relative to the mean methane concentration, we find a rather stable positive relative interpolar difference throughout the record with its minimum value of 3.7 ± 0.7 % between 21 900-21 200 years before present, which is higher than previously estimated in this interval close to the Last Glacial Maximum. This implies that Northern Hemisphere boreal wetland sources were never completely shut off during the peak glacial, as suggested from previous bipolar methane concentration records. Starting at 21 000 years before present, i.e. several millennia prior to the transition into the Holocene, the relative interpolar difference becomes even more positive and stays at a fairly stable level of 6.5 ± 0.8 % during Termination 1. We thus find that the boreal and tropical methane sources increased by approximately the same factor during Termination 1. We hypothesise that latitudinal shifts in the Intertropical Convergence Zone (ITCZ) and the monsoon system contribute, either by dislocation of the methane source regions or, in case of the ITCZ, also by changing the relative atmospheric volumes of the Northern and Southern Hemispheres
Kuenzel, W J; Sharp, P J
1985-04-01
Advancement of reproductive function occurred in male domestic chicks after lateral hypothalamic deafferentation (bilateral knife cuts extending from the preoptic to the mamillary region) at 2 weeks of age. Five out of 24 chicks showed sexual precocity as shown by accelerated comb growth after surgery. The 5 chicks had significantly higher concentrations of plasma luteinising hormone (LH) and androgen (A) than 5 sham-operated controls. Maximum concentrations of plasma LH and A were observed 3 and 4 weeks respectively after surgery. It is concluded that in the male domestic chick gonadotropin secretion is inhibited by extrahypothalamic influences.
Maranhao, P.; Marques, J.C.; Madeira, V.M.C.
1999-08-01
Zinc and cadmium concentrations in crayfish (Procambarus clarkii) soft tissues (as edible portion) were measured after exposure to zinc and cadmium at 0, 25, 50, or 100 {micro}g/L for 96 h at 10 or 20 C, and compared to environmental standards for human consumption. Results demonstrated that no significant change occurred in the concentrations of zinc in soft tissues of crayfish under the given conditions. Net accumulation of cadmium was observed at all experimental exposures, and exceeded the maximum allowed for human consumption only for those crayfish exposed to 100 {micro}g/L at 20 C.
Predicting Maximum Sunspot Number in Solar Cycle 24
Nipa J Bhatt; Rajmal Jain; Malini Aggarwal
2009-03-01
A few prediction methods have been developed based on the precursor technique which is found to be successful for forecasting the solar activity. Considering the geomagnetic activity aa indices during the descending phase of the preceding solar cycle as the precursor, we predict the maximum amplitude of annual mean sunspot number in cycle 24 to be 111 ± 21. This suggests that the maximum amplitude of the upcoming cycle 24 will be less than cycles 21–22. Further, we have estimated the annual mean geomagnetic activity aa index for the solar maximum year in cycle 24 to be 20.6 ± 4.7 and the average of the annual mean sunspot number during the descending phase of cycle 24 is estimated to be 48 ± 16.8.
Construction and enumeration of Boolean functions with maximum algebraic immunity
ZHANG WenYing; WU ChuanKun; LIU XiangZhong
2009-01-01
Algebraic immunity is a new cryptographic criterion proposed against algebraic attacks. In order to resist algebraic attacks, Boolean functions used in many stream ciphers should possess high algebraic immunity. This paper presents two main results to find balanced Boolean functions with maximum algebraic immunity. Through swapping the values of two bits, and then generalizing the result to swap some pairs of bits of the symmetric Boolean function constructed by Dalai, a new class of Boolean functions with maximum algebraic immunity are constructed. Enumeration of such functions is also given. For a given function p(x) with deg(p(x)) < [n/2], we give a method to construct functions in the form p(x)+q(x) which achieve the maximum algebraic immunity, where every term with nonzero coefficient in the ANF of q(x) has degree no less than [n/2].
Propane spectral resolution enhancement by the maximum entropy method
Bonavito, N. L.; Stewart, K. P.; Hurley, E. J.; Yeh, K. C.; Inguva, R.
1990-01-01
The Burg algorithm for maximum entropy power spectral density estimation is applied to a time series of data obtained from a Michelson interferometer and compared with a standard FFT estimate for resolution capability. The propane transmittance spectrum was estimated by use of the FFT with a 2 to the 18th data sample interferogram, giving a maximum unapodized resolution of 0.06/cm. This estimate was then interpolated by zero filling an additional 2 to the 18th points, and the final resolution was taken to be 0.06/cm. Comparison of the maximum entropy method (MEM) estimate with the FFT was made over a 45/cm region of the spectrum for several increasing record lengths of interferogram data beginning at 2 to the 10th. It is found that over this region the MEM estimate with 2 to the 16th data samples is in close agreement with the FFT estimate using 2 to the 18th samples.
Mass mortality of the vermetid gastropod Ceraesignum maximum
Brown, A. L.; Frazer, T. K.; Shima, J. S.; Osenberg, C. W.
2016-09-01
Ceraesignum maximum (G.B. Sowerby I, 1825), formerly Dendropoma maximum, was subject to a sudden, massive die-off in the Society Islands, French Polynesia, in 2015. On Mo'orea, where we have detailed documentation of the die-off, these gastropods were previously found in densities up to 165 m-2. In July 2015, we surveyed shallow back reefs of Mo'orea before, during and after the die-off, documenting their swift decline. All censused populations incurred 100% mortality. Additional surveys and observations from Mo'orea, Tahiti, Bora Bora, and Huahine (but not Taha'a) suggested a similar, and approximately simultaneous, die-off. The cause(s) of this cataclysmic mass mortality are currently unknown. Given the previously documented negative effects of C. maximum on corals, we expect the die-off will have cascading effects on the reef community.
The optimal polarizations for achieving maximum contrast in radar images
Swartz, A. A.; Yueh, H. A.; Kong, J. A.; Novak, L. M.; Shin, R. T.
1988-01-01
There is considerable interest in determining the optimal polarizations that maximize contrast between two scattering classes in polarimetric radar images. A systematic approach is presented for obtaining the optimal polarimetric matched filter, i.e., that filter which produces maximum contrast between two scattering classes. The maximization procedure involves solving an eigenvalue problem where the eigenvector corresponding to the maximum contrast ratio is an optimal polarimetric matched filter. To exhibit the physical significance of this filter, it is transformed into its associated transmitting and receiving polarization states, written in terms of horizontal and vertical vector components. For the special case where the transmitting polarization is fixed, the receiving polarization which maximizes the contrast ratio is also obtained. Polarimetric filtering is then applies to synthetic aperture radar images obtained from the Jet Propulsion Laboratory. It is shown, both numerically and through the use of radar imagery, that maximum image contrast can be realized when data is processed with the optimal polarimeter matched filter.
Penalized maximum likelihood estimation and variable selection in geostatistics
Chu, Tingjin; Wang, Haonan; 10.1214/11-AOS919
2012-01-01
We consider the problem of selecting covariates in spatial linear models with Gaussian process errors. Penalized maximum likelihood estimation (PMLE) that enables simultaneous variable selection and parameter estimation is developed and, for ease of computation, PMLE is approximated by one-step sparse estimation (OSE). To further improve computational efficiency, particularly with large sample sizes, we propose penalized maximum covariance-tapered likelihood estimation (PMLE$_{\\mathrm{T}}$) and its one-step sparse estimation (OSE$_{\\mathrm{T}}$). General forms of penalty functions with an emphasis on smoothly clipped absolute deviation are used for penalized maximum likelihood. Theoretical properties of PMLE and OSE, as well as their approximations PMLE$_{\\mathrm{T}}$ and OSE$_{\\mathrm{T}}$ using covariance tapering, are derived, including consistency, sparsity, asymptotic normality and the oracle properties. For covariance tapering, a by-product of our theoretical results is consistency and asymptotic normal...
Influence of maximum decking charge on intensity of blasting vibration
无
2006-01-01
Based on the character of short-time non-stationary random signal, the relationship between the maximum decking charge and energy distribution of blasting vibration signals was investigated by means of the wavelet packet method. Firstly, the characteristics of wavelet transform and wavelet packet analysis were described. Secondly, the blasting vibration signals were analyzed by wavelet packet based on software MATLAB, and the change of energy distribution curve at different frequency bands were obtained. Finally, the law of energy distribution of blasting vibration signals changing with the maximum decking charge was analyzed. The results show that with the increase of decking charge, the ratio of the energy of high frequency to total energy decreases, the dominant frequency bands of blasting vibration signals tend towards low frequency and blasting vibration does not depend on the maximum decking charge.
The subsequence weight distribution of summed maximum length digital sequences
Weathers, G. D.; Graf, E. R.; Wallace, G. R.
1974-01-01
An attempt is made to develop mathematical formulas to provide the basis for the design of pseudorandom signals intended for applications requiring accurate knowledge of the statistics of the signals. The analysis approach involves calculating the first five central moments of the weight distribution of subsequences of hybrid-sum sequences. The hybrid-sum sequence is formed from the modulo-two sum of k maximum length sequences and is an extension of the sum sequences formed from two maximum length sequences that Gilson (1966) evaluated. The weight distribution of the subsequences serves as an approximation to the filtering process. The basic reason for the analysis of hybrid-sum sequences is to establish a large group of sequences with good statistical properties. It is shown that this can be accomplished much more efficiently using the hybrid-sum approach rather than forming the group strictly from maximum length sequences.
Maximum power point tracking for optimizing energy harvesting process
Akbari, S.; Thang, P. C.; Veselov, D. S.
2016-10-01
There has been a growing interest in using energy harvesting techniques for powering wireless sensor networks. The reason for utilizing this technology can be explained by the sensors limited amount of operation time which results from the finite capacity of batteries and the need for having a stable power supply in some applications. Energy can be harvested from the sun, wind, vibration, heat, etc. It is reasonable to develop multisource energy harvesting platforms for increasing the amount of harvesting energy and to mitigate the issue concerning the intermittent nature of ambient sources. In the context of solar energy harvesting, it is possible to develop algorithms for finding the optimal operation point of solar panels at which maximum power is generated. These algorithms are known as maximum power point tracking techniques. In this article, we review the concept of maximum power point tracking and provide an overview of the research conducted in this area for wireless sensor networks applications.
Proscriptive Bayesian Programming and Maximum Entropy: a Preliminary Study
Koike, Carla Cavalcante
2008-11-01
Some problems found in robotics systems, as avoiding obstacles, can be better described using proscriptive commands, where only prohibited actions are indicated in contrast to prescriptive situations, which demands that a specific command be specified. An interesting question arises regarding the possibility to learn automatically if proscriptive commands are suitable and which parametric function could be better applied. Lately, a great variety of problems in robotics domain are object of researches using probabilistic methods, including the use of Maximum Entropy in automatic learning for robot control systems. This works presents a preliminary study on automatic learning of proscriptive robot control using maximum entropy and using Bayesian Programming. It is verified whether Maximum entropy and related methods can favour proscriptive commands in an obstacle avoidance task executed by a mobile robot.
Multitime maximum principle approach of minimal submanifolds and harmonic maps
Udriste, Constantin
2011-01-01
Some optimization problems coming from the Differential Geometry, as for example, the minimal submanifolds problem and the harmonic maps problem are solved here via interior solutions of appropriate multitime optimal control problems. Section 1 underlines some science domains where appear multitime optimal control problems. Section 2 (Section 3) recalls the multitime maximum principle for optimal control problems with multiple (curvilinear) integral cost functionals and $m$-flow type constraint evolution. Section 4 shows that there exists a multitime maximum principle approach of multitime variational calculus. Section 5 (Section 6) proves that the minimal submanifolds (harmonic maps) are optimal solutions of multitime evolution PDEs in an appropriate multitime optimal control problem. Section 7 uses the multitime maximum principle to show that of all solids having a given surface area, the sphere is the one having the greatest volume. Section 8 studies the minimal area of a multitime linear flow as optimal c...
A Maximum Entropy Estimator for the Aggregate Hierarchical Logit Model
Pedro Donoso
2011-08-01
Full Text Available A new approach for estimating the aggregate hierarchical logit model is presented. Though usually derived from random utility theory assuming correlated stochastic errors, the model can also be derived as a solution to a maximum entropy problem. Under the latter approach, the Lagrange multipliers of the optimization problem can be understood as parameter estimators of the model. Based on theoretical analysis and Monte Carlo simulations of a transportation demand model, it is demonstrated that the maximum entropy estimators have statistical properties that are superior to classical maximum likelihood estimators, particularly for small or medium-size samples. The simulations also generated reduced bias in the estimates of the subjective value of time and consumer surplus.
Approximate maximum-entropy moment closures for gas dynamics
McDonald, James G.
2016-11-01
Accurate prediction of flows that exist between the traditional continuum regime and the free-molecular regime have proven difficult to obtain. Current methods are either inaccurate in this regime or prohibitively expensive for practical problems. Moment closures have long held the promise of providing new, affordable, accurate methods in this regime. The maximum-entropy hierarchy of closures seems to offer particularly attractive physical and mathematical properties. Unfortunately, several difficulties render the practical implementation of maximum-entropy closures very difficult. This work examines the use of simple approximations to these maximum-entropy closures and shows that physical accuracy that is vastly improved over continuum methods can be obtained without a significant increase in computational cost. Initially the technique is demonstrated for a simple one-dimensional gas. It is then extended to the full three-dimensional setting. The resulting moment equations are used for the numerical solution of shock-wave profiles with promising results.
Semidefinite Programming for Approximate Maximum Likelihood Sinusoidal Parameter Estimation
Kenneth W. K. Lui
2009-01-01
Full Text Available We study the convex optimization approach for parameter estimation of several sinusoidal models, namely, single complex/real tone, multiple complex sinusoids, and single two-dimensional complex tone, in the presence of additive Gaussian noise. The major difficulty for optimally determining the parameters is that the corresponding maximum likelihood (ML estimators involve finding the global minimum or maximum of multimodal cost functions because the frequencies are nonlinear in the observed signals. By relaxing the nonconvex ML formulations using semidefinite programs, high-fidelity approximate solutions are obtained in a globally optimum fashion. Computer simulations are included to contrast the estimation performance of the proposed semi-definite relaxation methods with the iterative quadratic maximum likelihood technique as well as Cramér-Rao lower bound.
Remarks on the strong maximum principle for nonlocal operators
Jerome Coville
2008-05-01
Full Text Available In this note, we study the existence of a strong maximum principle for the nonlocal operator $$ mathcal{M}[u](x :=int_{G}J(gu(x*g^{-1}dmu(g - u(x, $$ where $G$ is a topological group acting continuously on a Hausdorff space $X$ and $u in C(X$. First we investigate the general situation and derive a pre-maximum principle. Then we restrict our analysis to the case of homogeneous spaces (i.e., $ X=G /H$. For such Hausdorff spaces, depending on the topology, we give a condition on $J$ such that a strong maximum principle holds for $mathcal{M}$. We also revisit the classical case of the convolution operator (i.e. $G=(mathbb{R}^n,+, X=mathbb{R}^n, dmu =dy$.
Resource-constrained maximum network throughput on space networks
Yanling Xing; Ning Ge; Youzheng Wang
2015-01-01
This paper investigates the maximum network through-put for resource-constrained space networks based on the delay and disruption-tolerant networking (DTN) architecture. Specifical y, this paper proposes a methodology for calculating the maximum network throughput of multiple transmission tasks under storage and delay constraints over a space network. A mixed-integer linear programming (MILP) is formulated to solve this problem. Simula-tions results show that the proposed methodology can successful y calculate the optimal throughput of a space network under storage and delay constraints, as wel as a clear, monotonic relationship between end-to-end delay and the maximum network throughput under storage constraints. At the same time, the optimization re-sults shine light on the routing and transport protocol design in space communication, which can be used to obtain the optimal network throughput.
Semidefinite Programming for Approximate Maximum Likelihood Sinusoidal Parameter Estimation
Lui, Kenneth W. K.; So, H. C.
2009-12-01
We study the convex optimization approach for parameter estimation of several sinusoidal models, namely, single complex/real tone, multiple complex sinusoids, and single two-dimensional complex tone, in the presence of additive Gaussian noise. The major difficulty for optimally determining the parameters is that the corresponding maximum likelihood (ML) estimators involve finding the global minimum or maximum of multimodal cost functions because the frequencies are nonlinear in the observed signals. By relaxing the nonconvex ML formulations using semidefinite programs, high-fidelity approximate solutions are obtained in a globally optimum fashion. Computer simulations are included to contrast the estimation performance of the proposed semi-definite relaxation methods with the iterative quadratic maximum likelihood technique as well as Cramér-Rao lower bound.
Quality, precision and accuracy of the maximum No. 40 anemometer
Obermeir, J. [Otech Engineering, Davis, CA (United States); Blittersdorf, D. [NRG Systems Inc., Hinesburg, VT (United States)
1996-12-31
This paper synthesizes available calibration data for the Maximum No. 40 anemometer. Despite its long history in the wind industry, controversy surrounds the choice of transfer function for this anemometer. Many users are unaware that recent changes in default transfer functions in data loggers are producing output wind speed differences as large as 7.6%. Comparison of two calibration methods used for large samples of Maximum No. 40 anemometers shows a consistent difference of 4.6% in output speeds. This difference is significantly larger than estimated uncertainty levels. Testing, initially performed to investigate related issues, reveals that Gill and Maximum cup anemometers change their calibration transfer functions significantly when calibrated in the open atmosphere compared with calibration in a laminar wind tunnel. This indicates that atmospheric turbulence changes the calibration transfer function of cup anemometers. These results call into question the suitability of standard wind tunnel calibration testing for cup anemometers. 6 refs., 10 figs., 4 tabs.
The evolution of maximum body size of terrestrial mammals.
Smith, Felisa A; Boyer, Alison G; Brown, James H; Costa, Daniel P; Dayan, Tamar; Ernest, S K Morgan; Evans, Alistair R; Fortelius, Mikael; Gittleman, John L; Hamilton, Marcus J; Harding, Larisa E; Lintulaakso, Kari; Lyons, S Kathleen; McCain, Christy; Okie, Jordan G; Saarinen, Juha J; Sibly, Richard M; Stephens, Patrick R; Theodor, Jessica; Uhen, Mark D
2010-11-26
The extinction of dinosaurs at the Cretaceous/Paleogene (K/Pg) boundary was the seminal event that opened the door for the subsequent diversification of terrestrial mammals. Our compilation of maximum body size at the ordinal level by sub-epoch shows a near-exponential increase after the K/Pg. On each continent, the maximum size of mammals leveled off after 40 million years ago and thereafter remained approximately constant. There was remarkable congruence in the rate, trajectory, and upper limit across continents, orders, and trophic guilds, despite differences in geological and climatic history, turnover of lineages, and ecological variation. Our analysis suggests that although the primary driver for the evolution of giant mammals was diversification to fill ecological niches, environmental temperature and land area may have ultimately constrained the maximum size achieved.
The maximum force in a column under constant speed compression
Kuzkin, Vitaly A
2015-01-01
Dynamic buckling of an elastic column under compression at constant speed is investigated assuming the first-mode buckling. Two cases are considered: (i) an imperfect column (Hoff's statement), and (ii) a perfect column having an initial lateral deflection. The range of parameters, where the maximum load supported by a column exceeds Euler static force is determined. In this range, the maximum load is represented as a function of the compression rate, slenderness ratio, and imperfection/initial deflection. Considering the results we answer the following question: "How slowly the column should be compressed in order to measure static load-bearing capacity?" This question is important for the proper setup of laboratory experiments and computer simulations of buckling. Additionally, it is shown that the behavior of a perfect column having an initial deflection differ significantlys form the behavior of an imperfect column. In particular, the dependence of the maximum force on the compression rate is non-monotoni...
Maximum-Entropy Inference with a Programmable Annealer
Chancellor, Nicholas; Vinci, Walter; Aeppli, Gabriel; Warburton, Paul A
2015-01-01
Optimisation problems in science and engineering typically involve finding the ground state (i.e. the minimum energy configuration) of a cost function with respect to many variables. If the variables are corrupted by noise then this approach maximises the likelihood that the solution found is correct. An alternative approach is to make use of prior statistical information about the noise in conjunction with Bayes's theorem. The maximum entropy solution to the problem then takes the form of a Boltzmann distribution over the ground and excited states of the cost function. Here we use a programmable Josephson junction array for the information decoding problem which we simulate as a random Ising model in a field. We show experimentally that maximum entropy decoding at finite temperature can in certain cases give competitive and even slightly better bit-error-rates than the maximum likelihood approach at zero temperature, confirming that useful information can be extracted from the excited states of the annealing...
Estimating the maximum potential revenue for grid connected electricity storage :
Byrne, Raymond Harry; Silva Monroy, Cesar Augusto.
2012-12-01
The valuation of an electricity storage device is based on the expected future cash flow generated by the device. Two potential sources of income for an electricity storage system are energy arbitrage and participation in the frequency regulation market. Energy arbitrage refers to purchasing (stor- ing) energy when electricity prices are low, and selling (discharging) energy when electricity prices are high. Frequency regulation is an ancillary service geared towards maintaining system frequency, and is typically procured by the independent system operator in some type of market. This paper outlines the calculations required to estimate the maximum potential revenue from participating in these two activities. First, a mathematical model is presented for the state of charge as a function of the storage device parameters and the quantities of electricity purchased/sold as well as the quantities o ered into the regulation market. Using this mathematical model, we present a linear programming optimization approach to calculating the maximum potential revenue from an elec- tricity storage device. The calculation of the maximum potential revenue is critical in developing an upper bound on the value of storage, as a benchmark for evaluating potential trading strate- gies, and a tool for capital nance risk assessment. Then, we use historical California Independent System Operator (CAISO) data from 2010-2011 to evaluate the maximum potential revenue from the Tehachapi wind energy storage project, an American Recovery and Reinvestment Act of 2009 (ARRA) energy storage demonstration project. We investigate the maximum potential revenue from two di erent scenarios: arbitrage only and arbitrage combined with the regulation market. Our analysis shows that participation in the regulation market produces four times the revenue compared to arbitrage in the CAISO market using 2010 and 2011 data. Then we evaluate several trading strategies to illustrate how they compare to the
Partin, Judson Wiley
The West Pacific Warm Pool (WPWP) plays an important role in the global heat budget and global hydrologic cycle, so knowledge about its past variability would improve our understanding of global climate. Variations in WPWP precipitation are most notable during El Nino-Southern Oscillation events, when climate changes in the tropical Pacific impact rainfall not only in the WPWP, but around the globe. The stalagmite records presented in this dissertation provide centennial-to-millennial-scale constraints of WPWP precipitation during three distinct climatic periods: the Last Glacial Maximum (LGM), the last deglaciation, and the Holocene. In Chapter 2, the methodologies associated with the generation of U/Th-based absolute ages for the stalagmites are presented. In the final age models for the stalagmites, dates younger than 11,000 years have absolute errors of +/-400 years or less, and dates older than 11,000 years have a relative error of +/-2%. Stalagmite-specific 230Th/ 232Th ratios, calculated using isochrons, are used to correct for the presence of unsupported 230Th in a stalagmite at the time of formation. Hiatuses in the record are identified using a combination of optical properties, high 232Th concentrations, and extrapolation from adjacent U/Th dates. In Chapter 3, stalagmite oxygen isotopic composition (delta18O) records from N. Borneo are presented which reveal millennial-scale rainfall changes that occurred in response to changes in global climate boundary conditions, radiative forcing, and abrupt climate changes. The stalagmite delta18O records detect little change in inferred precipitation between the LGM and the present, although significant uncertainties are associated with the impact of the Sunda Shelf on rainfall delta 18O during the LGM. A millennial-scale drying in N. Borneo, inferred from an increase in stalagmite delta18O, peaks at ˜16.5ka coeval with timing of Heinrich event 1, possibly related to a southward movement of the Intertropical