OECD Maximum Residue Limit Calculator
With the goal of harmonizing the calculation of maximum residue limits (MRLs) across the Organisation for Economic Cooperation and Development, the OECD has developed an MRL Calculator. View the calculator.
Maximum phytoplankton concentrations in the sea
Jackson, G.A.; Kiørboe, Thomas
2008-01-01
A simplification of plankton dynamics using coagulation theory provides predictions of the maximum algal concentration sustainable in aquatic systems. These predictions have previously been tested successfully against results from iron fertilization experiments. We extend the test to data collected...... in the North Atlantic as part of the Bermuda Atlantic Time Series program as well as data collected off Southern California as part of the Southern California Bight Study program. The observed maximum particulate organic carbon and volumetric particle concentrations are consistent with the predictions...
Scientific substantination of maximum allowable concentration of fluopicolide in water
Pelo I.М.
2014-03-01
Full Text Available In order to substantiate fluopicolide maximum allowable concentration in the water of water reservoirs the research was carried out. Methods of study: laboratory hygienic experiment using organoleptic and sanitary-chemical, sanitary-toxicological, sanitary-microbiological and mathematical methods. The results of fluopicolide influence on organoleptic properties of water, sanitary regimen of reservoirs for household purposes were given and its subthreshold concentration in water by sanitary and toxicological hazard index was calculated. The threshold concentration of the substance by the main hazard criteria was established, the maximum allowable concentration in water was substantiated. The studies led to the following conclusions: fluopicolide threshold concentration in water by organoleptic hazard index (limiting criterion – the smell – 0.15 mg/dm3, general sanitary hazard index (limiting criteria – impact on the number of saprophytic microflora, biochemical oxygen demand and nitrification – 0.015 mg/dm3, the maximum noneffective concentration – 0.14 mg/dm3, the maximum allowable concentration - 0.015 mg/dm3.
Pushing concentration of stationary solar concentrators to the limit.
Winston, Roland; Zhang, Weiya
2010-04-26
We give the theoretical limit of concentration allowed by nonimaging optics for stationary solar concentrators after reviewing sun- earth geometry in direction cosine space. We then discuss the design principles that we follow to approach the maximum concentration along with examples including a hollow CPC trough, a dielectric CPC trough, and a 3D dielectric stationary solar concentrator which concentrates sun light four times (4x), eight hours per day year around.
14 CFR 25.1505 - Maximum operating limit speed.
2010-01-01
... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Maximum operating limit speed. 25.1505... Operating Limitations § 25.1505 Maximum operating limit speed. The maximum operating limit speed (V MO/M MO airspeed or Mach Number, whichever is critical at a particular altitude) is a speed that may not...
Maximum Permissible Concentrations and Negligible Concentrations for Rare Earth Elements (REEs)
Sneller FEC; Kalf DF; Weltje L; Wezel AP van; CSR
2000-01-01
In this report maximum permissible concentrations (MPCs) and negligible concentrations (NCs) are derived for Rare Earth Elements (REEs), which are also known as lanthanides. The REEs selected for derivation of environmental risk limits in this report are Yttrium (Y), Lanthanum (La), Cerium (Ce), Pra
A Note on k-Limited Maximum Base
Yang Ruishun; Yang Xiaowei
2006-01-01
The problem of k-limited maximum base was specified into two special problems of k-limited maximum base; that is, let subset D of the problem of k-limited maximum base be an independent set and a circuit of the matroid, respectively. It was proved that under this circumstance the collections of k-limited base satisfy base axioms. Then a new matroid was determined, and the problem of k-limited maximum base was transformed to the problem of maximum base of this new matroid. Aiming at the problem, two algorithms, which in essence are greedy algorithms based on former matroid, were presented for the two special problems of k-limited maximum base. They were proved to be reasonable and more efficient than the algorithm presented by Ma Zhongfan in view of the complexity of algorithm.
30 CFR 57.5039 - Maximum permissible concentration.
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum permissible concentration. 57.5039... Maximum permissible concentration. Except as provided by standard § 57.5005, persons shall not be exposed to air containing concentrations of radon daughters exceeding 1.0 WL in active workings. ...
5 CFR 550.105 - Biweekly maximum earnings limitation.
2010-01-01
... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Biweekly maximum earnings limitation. 550.105 Section 550.105 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PAY ADMINISTRATION (GENERAL) Premium Pay Maximum Earnings Limitations § 550.105 Biweekly...
5 CFR 550.106 - Annual maximum earnings limitation.
2010-01-01
... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Annual maximum earnings limitation. 550.106 Section 550.106 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PAY ADMINISTRATION (GENERAL) Premium Pay Maximum Earnings Limitations § 550.106 Annual...
赵明; 谢松梅; 杨劲; 魏敏吉
2014-01-01
During the assessment of bioequivalence in our country ,the in-terval limits for maximum concentration ( Cmax ) is in an alternating phase.The aim of this paper is to introduce some principles and thoughts of bioequivalence for area under the curve (AUC) and Cmax.Examples of two drugs evaluation were presented here , which might be helpful for the development and review of generics.%在国内的生物等效性评价中，峰浓度（Cmax ）的等效界值尚处在新老标准交替阶段。当 Cmax处在新老标准之间，如何进行审评决策，是一个需要认真考虑的问题。本文通过2个药物审评实例，介绍关于该类问题的思考原则和思路，以期为仿制药的研究开发和审评提供参考。
Summary of Dissolved Concentration Limits
Yueting Chen
2001-06-11
According to the Technical Work Plan titled Technical Work Plan for Waste Form Degradation Process Model Report for SR (CRWMS M&O 2000a), the purpose of this study is to perform abstractions on solubility limits of radioactive elements based on the process-level information and thermodynamic databases provided by Natural Environment Program Operations (NEPO) and Waste Package Operations (WPO). The scope of this analysis is to produce solubility limits as functions, distributions, or constants for all transported radioactive elements identified by the Performance Assessment Operations (PAO) radioisotope screening. Results from an expert elicitation for solubility limits of most radioactive elements were used in the previous Total System Performance Assessments (TSPAs). However, the elicitation conducted in 1993 does not meet the criteria set forth by the U.S. Nuclear Regulatory Commission (NRC) due to lack of documentation and traceability (Kotra et al. 1996, Section 3). Therefore, at the Waste Form Abstraction Workshop held on February 2-4, 1999, at Albuquerque, New Mexico, the Yucca Mountain Site Characterization Project (YMP) decided to develop geochemical models to study solubility for the proposed Monitored Geologic Repository. WPO/NEPO is to develop process-level solubility models, including review and compilation of relevant thermodynamic data. PAO's responsibility is to perform abstractions based on the process models and chemical conditions and to produce solubility distributions or response surfaces applicable to the proposed repository. The results of this analysis and conceptual model will feed the performance assessment for Total System Performance Assessment--Site Recommendation (TSPA-SR) and Total System Performance Assessment--License Application (TSPA-LA), and to the Waste Form Degradation Process Model Report section on concentration limits.
Wezel AP van; Vlaardingen P van; CSR
2001-01-01
This report presents maximum permissible concentrations and negligible concentrations that have been derived for various antifouling substances used as substitutes for TBT. Included here are Irgarol 1051, dichlofluanide, ziram, chlorothalonil and TCMTB.
Radiation Pressure Acceleration: the factors limiting maximum attainable ion energy
Bulanov, S S; Schroeder, C B; Bulanov, S V; Esirkepov, T Zh; Kando, M; Pegoraro, F; Leemans, W P
2016-01-01
Radiation pressure acceleration (RPA) is a highly efficient mechanism of laser-driven ion acceleration, with with near complete transfer of the laser energy to the ions in the relativistic regime. However, there is a fundamental limit on the maximum attainable ion energy, which is determined by the group velocity of the laser. The tightly focused laser pulses have group velocities smaller than the vacuum light speed, and, since they offer the high intensity needed for the RPA regime, it is plausible that group velocity effects would manifest themselves in the experiments involving tightly focused pulses and thin foils. However, in this case, finite spot size effects are important, and another limiting factor, the transverse expansion of the target, may dominate over the group velocity effect. As the laser pulse diffracts after passing the focus, the target expands accordingly due to the transverse intensity profile of the laser. Due to this expansion, the areal density of the target decreases, making it trans...
Noise and physical limits to maximum resolution of PET images
Herraiz, J.L.; Espana, S. [Dpto. Fisica Atomica, Molecular y Nuclear, Facultad de Ciencias Fisicas, Universidad Complutense de Madrid, Avda. Complutense s/n, E-28040 Madrid (Spain); Vicente, E.; Vaquero, J.J.; Desco, M. [Unidad de Medicina y Cirugia Experimental, Hospital GU ' Gregorio Maranon' , E-28007 Madrid (Spain); Udias, J.M. [Dpto. Fisica Atomica, Molecular y Nuclear, Facultad de Ciencias Fisicas, Universidad Complutense de Madrid, Avda. Complutense s/n, E-28040 Madrid (Spain)], E-mail: jose@nuc2.fis.ucm.es
2007-10-01
In this work we show that there is a limit for the maximum resolution achievable with a high resolution PET scanner, as well as for the best signal-to-noise ratio, which are ultimately related to the physical effects involved in the emission and detection of the radiation and thus they cannot be overcome with any particular reconstruction method. These effects prevent the spatial high frequency components of the imaged structures to be recorded by the scanner. Therefore, the information encoded in these high frequencies cannot be recovered by any reconstruction technique. Within this framework, we have determined the maximum resolution achievable for a given acquisition as a function of data statistics and scanner parameters, like the size of the crystals or the inter-crystal scatter. In particular, the noise level in the data as a limitation factor to yield high-resolution images in tomographs with small crystal sizes is outlined. These results have implications regarding how to decide the optimal number of voxels of the reconstructed image or how to design better PET scanners.
40 CFR 264.94 - Concentration limits.
2010-07-01
... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Concentration limits. 264.94 Section... From Solid Waste Management Units § 264.94 Concentration limits. (a) The Regional Administrator will specify in the facility permit concentration limits in the ground water for hazardous constituents...
Maximum Likelihood Position Location with a Limited Number of References
D. Munoz-Rodriguez
2011-04-01
Full Text Available A Position Location (PL scheme for mobile users on the outskirts of coverage areas is presented. The proposedmethodology makes it possible to obtain location information with only two land-fixed references. We introduce ageneral formulation and show that maximum-likelihood estimation can provide adequate PL information in thisscenario. The Root Mean Square (RMS error and error-distribution characterization are obtained for differentpropagation scenarios. In addition, simulation results and comparisons to another method are provided showing theaccuracy and the robustness of the method proposed. We study accuracy limits of the proposed methodology fordifferent propagation environments and show that even in the case of mismatch in the error variances, good PLestimation is feasible.
Feedback Limits to Maximum Seed Masses of Black Holes
Pacucci, Fabio; Natarajan, Priyamvada; Ferrara, Andrea
2017-02-01
The most massive black holes observed in the universe weigh up to ∼1010 M ⊙, nearly independent of redshift. Reaching these final masses likely required copious accretion and several major mergers. Employing a dynamical approach that rests on the role played by a new, relevant physical scale—the transition radius—we provide a theoretical calculation of the maximum mass achievable by a black hole seed that forms in an isolated halo, one that scarcely merged. Incorporating effects at the transition radius and their impact on the evolution of accretion in isolated halos, we are able to obtain new limits for permitted growth. We find that large black hole seeds (M • ≳ 104 M ⊙) hosted in small isolated halos (M h ≲ 109 M ⊙) accreting with relatively small radiative efficiencies (ɛ ≲ 0.1) grow optimally in these circumstances. Moreover, we show that the standard M •–σ relation observed at z ∼ 0 cannot be established in isolated halos at high-z, but requires the occurrence of mergers. Since the average limiting mass of black holes formed at z ≳ 10 is in the range 104–6 M ⊙, we expect to observe them in local galaxies as intermediate-mass black holes, when hosted in the rare halos that experienced only minor or no merging events. Such ancient black holes, formed in isolation with subsequent scant growth, could survive, almost unchanged, until present.
Iammarino, Marco; Di Taranto, Aurelia; Muscarella, Marilena
2012-02-01
Sulphiting agents are commonly used food additives. They are not allowed in fresh meat preparations. In this work, 2250 fresh meat samples were analysed to establish the maximum concentration of sulphites that can be considered as "natural" and therefore be admitted in fresh meat preparations. The analyses were carried out by an optimised Monier-Williams Method and the positive samples confirmed by ion chromatography. Sulphite concentrations higher than the screening method LOQ (10.0 mg · kg(-1)) were found in 100 samples. Concentrations higher than 76.6 mg · kg(-1), attributable to sulphiting agent addition, were registered in 40 samples. Concentrations lower than 41.3 mg · kg(-1) were registered in 60 samples. Taking into account the distribution of sulphite concentrations obtained, it is plausible to estimate a maximum allowable limit of 40.0 mg · kg(-1) (expressed as SO(2)). Below this value the samples can be considered as "compliant".
Hutchinson, Thomas H. [Plymouth Marine Laboratory, Prospect Place, The Hoe, Plymouth PL1 3DH (United Kingdom)], E-mail: thom1@pml.ac.uk; Boegi, Christian [BASF SE, Product Safety, GUP/PA, Z470, 67056 Ludwigshafen (Germany); Winter, Matthew J. [AstraZeneca Safety, Health and Environment, Brixham Environmental Laboratory, Devon TQ5 8BA (United Kingdom); Owens, J. Willie [The Procter and Gamble Company, Central Product Safety, 11810 East Miami River Road, Cincinnati, OH 45252 (United States)
2009-02-19
organisms and the development of sound criteria for data interpretation when the exposure of organisms has exceeded the MTD. While the MTD approach is well established for oral, topical, inhalational or injection exposure routes in mammalian toxicology, we propose that for exposure of aquatic organisms via immersion, the term Maximum Tolerated Concentration (MTC) is more appropriate.
Stone, Wesley W.; Gilliom, Robert J.; Crawford, Charles G.
2008-01-01
Regression models were developed for predicting annual maximum and selected annual maximum moving-average concentrations of atrazine in streams using the Watershed Regressions for Pesticides (WARP) methodology developed by the National Water-Quality Assessment Program (NAWQA) of the U.S. Geological Survey (USGS). The current effort builds on the original WARP models, which were based on the annual mean and selected percentiles of the annual frequency distribution of atrazine concentrations. Estimates of annual maximum and annual maximum moving-average concentrations for selected durations are needed to characterize the levels of atrazine and other pesticides for comparison to specific water-quality benchmarks for evaluation of potential concerns regarding human health or aquatic life. Separate regression models were derived for the annual maximum and annual maximum 21-day, 60-day, and 90-day moving-average concentrations. Development of the regression models used the same explanatory variables, transformations, model development data, model validation data, and regression methods as those used in the original development of WARP. The models accounted for 72 to 75 percent of the variability in the concentration statistics among the 112 sampling sites used for model development. Predicted concentration statistics from the four models were within a factor of 10 of the observed concentration statistics for most of the model development and validation sites. Overall, performance of the models for the development and validation sites supports the application of the WARP models for predicting annual maximum and selected annual maximum moving-average atrazine concentration in streams and provides a framework to interpret the predictions in terms of uncertainty. For streams with inadequate direct measurements of atrazine concentrations, the WARP model predictions for the annual maximum and the annual maximum moving-average atrazine concentrations can be used to characterize
Concerning the maximum frequency limits of Gunn operators
R; F; Macpherson; G; M; Dunn; Ata; Khalid; D; R; S; Cumming
2015-01-01
The length of the transit region of a Gunn diode determines the natural frequency at which it operates in fundamental mode-the shorter the device,the higher the frequency of operation.The long-held view on Gunn diode design is that for a functioning device the minimum length of the transit region is about 1.5μm,limiting the devices to fundamental mode operation at frequencies of roughly 60 GHz.The authors posit that this theoretical restriction is a consequence of limits of the hydrodynamic models by which it was determined.Study of these devices by more advanced Monte Carlo techniques,which simulate the ballistic transport and electron-phonon interactions that govern device behaviour,offers a new lower bound of 0.5μm,which is already being approached by the experimental evidence shown in planar and vertical devices exhibiting Gunn operation at 0.6μm and 0.7μm.It is shown that the limits for Gunn domain operation are determined by the device length required for the transferred electron effect to occur(approximately 0.15μm,which as demonstrated is largely field independent)and the fundamental size of the domain(approximately 0.3μm).At this new length,operation in fundamental mode at much higher frequencies becomes possible-the Monte Carlo model used predicts power output at frequencies over 300 GHz.
Dependence of maximum concentration from chemical accidents on release duration
Hanna, Steven; Chang, Joseph
2017-01-01
Chemical accidents often involve releases of a total mass, Q, of stored material in a tank over a time duration, td, of less than a few minutes. The value of td is usually uncertain because of lack of knowledge of key information, such as the size and location of the hole and the pressure and temperature of the chemical. In addition, it is rare that eyewitnesses or video cameras are present at the time of the accident. For inhalation hazards, serious health effects (such as damage to the respiratory system) are determined by short term averages (pressurized liquefied chlorine releases from tanks are given, focusing on scenarios from the Jack Rabbit I (JR I) field experiment. The analytical calculations and the predictions of the SLAB dense gas dispersion model agree that the ratio of maximum C for two different td's is greatest (as much as a factor of ten) near the source. At large distances (beyond a few km for the JR I scenarios), where tt exceeds both td's, the ratio of maximum C approaches unity.
75 FR 76482 - Federal Housing Administration (FHA): FHA Maximum Loan Limits for 2011
2010-12-08
... URBAN DEVELOPMENT Federal Housing Administration (FHA): FHA Maximum Loan Limits for 2011 AGENCY: Office...: This notice announces that FHA has posted on its Web site the single-family maximum loan limits for 2011. The loan limit limits can be found at...
DISSOLVED CONCENTRATION LIMITS OF RADIOACTIVE ELEMENTS
NA
2004-11-22
The purpose of this study is to evaluate dissolved concentration limits (also referred to as solubility limits) of elements with radioactive isotopes under probable repository conditions, based on geochemical modeling calculations using geochemical modeling tools, thermodynamic databases, field measurements, and laboratory experiments. The scope of this modeling activity is to predict dissolved concentrations or solubility limits for 14 elements with radioactive isotopes (actinium, americium, carbon, cesium, iodine, lead, neptunium, plutonium, protactinium, radium, strontium, technetium, thorium, and uranium) important to calculated dose. Model outputs for uranium, plutonium, neptunium, thorium, americium, and protactinium are in the form of tabulated functions with pH and log (line integral) CO{sub 2} as independent variables, plus one or more uncertainty terms. The solubility limits for the remaining elements are either in the form of distributions or single values. The output data from this report are fundamental inputs for Total System Performance Assessment for the License Application (TSPA-LA) to determine the estimated release of these elements from waste packages and the engineered barrier system. Consistent modeling approaches and environmental conditions were used to develop solubility models for all of the actinides. These models cover broad ranges of environmental conditions so that they are applicable to both waste packages and the invert. Uncertainties from thermodynamic data, water chemistry, temperature variation, and activity coefficients have been quantified or otherwise addressed.
40 CFR Table 1 to Subpart A of... - Maximum Concentration of Constituents for Groundwater Protection
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Maximum Concentration of Constituents for Groundwater Protection 1 Table 1 to Subpart A of Part 192 Protection of Environment ENVIRONMENTAL... Concentration of Constituents for Groundwater Protection Constituent concentration 1 Maximum Arsenic 0.05 Barium...
Toxicity Data to Determine Refrigerant Concentration Limits
Calm, James M.
2000-09-30
This report reviews toxicity data, identifies sources for them, and presents resulting exposure limits for refrigerants for consideration by qualified parties in developing safety guides, standards, codes, and regulations. It outlines a method to calculate an acute toxicity exposure limit (ATEL) and from it a recommended refrigerant concentration limit (RCL) for emergency exposures. The report focuses on acute toxicity with particular attention to lethality, cardiac sensitization, anesthetic and central nervous system effects, and other escape-impairing effects. It addresses R-11, R-12, R-22, R-23, R-113, R-114, R-116, R-123, R-124, R-125, R-134, R-134a, R-E134, R-141b, R-142b, R-143a, R-152a, R-218, R-227ea, R-236fa, R-245ca, R-245fa, R-290, R-500, R-502, R-600a, R-717, and R-744. It summarizes additional data for R-14, R-115, R-170 (ethane), R-C318, R-600 (n-butane), and R-1270 (propylene) to enable calculation of limits for blends incorporating them. The report summarizes the data a nd related safety information, including classifications and flammability data. It also presents a series of tables with proposed ATEL and RCL concentrations-in dimensionless form and the latter also in both metric (SI) and inch-pound (IP) units of measure-for both the cited refrigerants and 66 zerotropic and azeotropic blends. They include common refrigerants, such as R-404A, R-407C, R-410A, and R-507A, as well as others in commercial or developmental status. Appendices provide profiles for the cited single-compound refrigerants and for R-500 and R-502 as well as narrative toxicity summaries for common refrigerants. The report includes an extensive set of references.
DISSOLVED CONCENTRATION LIMITS OF RADIOACTIVE ELEMENTS
P. Bernot
2005-07-13
The purpose of this study is to evaluate dissolved concentration limits (also referred to as solubility limits) of elements with radioactive isotopes under probable repository conditions, based on geochemical modeling calculations using geochemical modeling tools, thermodynamic databases, field measurements, and laboratory experiments. The scope of this activity is to predict dissolved concentrations or solubility limits for elements with radioactive isotopes (actinium, americium, carbon, cesium, iodine, lead, neptunium, plutonium, protactinium, radium, strontium, technetium, thorium, and uranium) relevant to calculated dose. Model outputs for uranium, plutonium, neptunium, thorium, americium, and protactinium are provided in the form of tabulated functions with pH and log fCO{sub 2} as independent variables, plus one or more uncertainty terms. The solubility limits for the remaining elements are either in the form of distributions or single values. Even though selection of an appropriate set of radionuclides documented in Radionuclide Screening (BSC 2002 [DIRS 160059]) includes actinium, transport of Ac is not modeled in the total system performance assessment for the license application (TSPA-LA) model because of its extremely short half-life. Actinium dose is calculated in the TSPA-LA by assuming secular equilibrium with {sup 231}Pa (Section 6.10); therefore, Ac is not analyzed in this report. The output data from this report are fundamental inputs for TSPA-LA used to determine the estimated release of these elements from waste packages and the engineered barrier system. Consistent modeling approaches and environmental conditions were used to develop solubility models for the actinides discussed in this report. These models cover broad ranges of environmental conditions so they are applicable to both waste packages and the invert. Uncertainties from thermodynamic data, water chemistry, temperature variation, and activity coefficients have been quantified or
Tran Duy, A.; Schrama, J.W.; Dam, van A.A.; Verreth, J.A.J.
2008-01-01
Feed intake and satiation in fish are regulated by a number of factors, of which dissolved oxygen concentration (DO) is important. Since fish take up oxygen through the limited gill surface area, all processes that need energy, including food processing, depend on their maximum oxygen uptake capacit
5 CFR 630.302 - Maximum annual leave accumulation-forty-five day limitation.
2010-01-01
... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Maximum annual leave accumulation-forty-five day limitation. 630.302 Section 630.302 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS ABSENCE AND LEAVE Annual Leave § 630.302 Maximum annual leave...
Colloid-Associated Radionuclide Concentration Limits: ANL
C. Mertz
2000-12-21
The purpose and scope of this report is to describe the analysis of available colloidal data from waste form corrosion tests at Argonne National Laboratory (ANL) to extract characteristics of these colloids that can be used in modeling their contribution to the source term for sparingly soluble radioelements (e.g., Pu). Specifically, the focus is on developing a useful description of the following waste form colloid characteristics: (1) composition, (2) size distribution, and (3) quantification of the rate of waste form colloid generation. The composition and size distribution information are intended to support analysis of the potential transport of the sparingly soluble radionuclides associated with the waste form colloids. The rate of colloid generation is intended to support analysis of the waste form colloid-associated radionuclide concentrations. In addressing the above characteristics, available data are interpreted to address mechanisms controlling colloid formation and stability. This report was developed in accordance with the ''Technical Work Plan for Waste Form Degradation Process Model Report for SR'' (CRWMS M&O 2000). Because the end objective is to support the source term modeling we have organized the conclusions into two categories: (1) data analysis conclusions and (2) recommendations for colloid source term modeling. The second category is included to facilitate use of the conclusions from the data analysis in the abstraction of a colloid source term model. The data analyses and conclusions that are presented in this report are based on small-scale laboratory tests conducted on a limited number of waste glass compositions and spent fuel types.
Sullivan, Terry [Brookhaven National Lab. (BNL), Upton, NY (United States)
2016-02-22
The objectives of this report are; To present a simplified conceptual model for release from the buildings with residual subsurface structures that can be used to provide an upper bound on contaminant concentrations in the fill material; Provide maximum water concentrations and the corresponding amount of mass sorbed to the solid fill material that could occur in each building for use in dose assessment calculations; Estimate the maximum concentration in a well located outside of the fill material; and Perform a sensitivity analysis of key parameters.
Volumetric Concentration Maximum of Cohesive Sediment in Waters: A Numerical Study
Jisun Byun
2014-12-01
Full Text Available Cohesive sediment has different characteristics compared to non-cohesive sediment. The density and size of a cohesive sediment aggregate (a so-called, floc continuously changes through the flocculation process. The variation of floc size and density can cause a change of volumetric concentration under the condition of constant mass concentration. This study investigates how the volumetric concentration is affected by different conditions such as flow velocity, water depth, and sediment suspension. A previously verified, one-dimensional vertical numerical model is utilized here. The flocculation process is also considered by floc in the growth type flocculation model. Idealized conditions are assumed in this study for the numerical experiments. The simulation results show that the volumetric concentration profile of cohesive sediment is different from the Rouse profile. The volumetric concentration decreases near the bed showing the elevated maximum in the cases of both current and oscillatory flow. The density and size of floc show the minimum and the maximum values near the elevation of volumetric concentration maximum, respectively. This study also shows that the flow velocity and the critical shear stress have significant effects on the elevated maximum of volumetric concentration. As mechanisms of the elevated maximum, the strong turbulence intensity and increased mass concentration are considered because they cause the enhanced flocculation process. This study uses numerical experiments. To the best of our knowledge, no laboratory or field experiments on the elevated maximum have been carried out until now. It is of great necessity to conduct well-controlled laboratory experiments in the near future.
Kim, K. M.; Smetana, P.
1990-03-01
Growth of large diameter Czochralski (CZ) silicon crystals require complete elimination of dislocations by means of Dash technique, where the seed diameter is reduced to a small size typically 3 mm in conjunction with increase in the pull rate. The maximum length of the large CZ silicon is estimated at the fracture stress limit of the seed neck diameter ( d). The maximum lengths for 200 and 300 mm CZ crystals amount to 197 and 87 cm, respectively, with d = 0.3 cm; the estimated maximum weight is 144 kg.
Kordheili, Reza Ahmadi; Bak-Jensen, Birgitte; Pillai, Jayakrishnan Radhakrishna
2014-01-01
High penetration of photovoltaic panels in distribution grid can bring the grid to its operation limits. The main focus of the paper is to determine maximum photovoltaic penetration level in the grid. Three main criteria were investigated for determining maximum penetration level of PV panels...... for this grid: even distribution of PV panels, aggregation of panels at the beginning of each feeder, and aggregation of panels at the end of each feeder. Load modeling is done using Velander formula. Since PV generation is highest in the summer due to irradiation, a summer day was chosen to determine maximum...
Maximum principle and convergence of central schemes based on slope limiters
Mehmetoglu, Orhan
2012-01-01
A maximum principle and convergence of second order central schemes is proven for scalar conservation laws in dimension one. It is well known that to establish a maximum principle a nonlinear piecewise linear reconstruction is needed and a typical choice is the minmod limiter. Unfortunately, this implies that the scheme uses a first order reconstruction at local extrema. The novelty here is that we allow local nonlinear reconstructions which do not reduce to first order at local extrema and still prove maximum principle and convergence. © 2011 American Mathematical Society.
30 CFR 33.33 - Allowable limits of dust concentration.
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Allowable limits of dust concentration. 33.33... MINES Test Requirements § 33.33 Allowable limits of dust concentration. (a) The concentration of dust determined by the control sample shall be subtracted from the average concentration of dust determined by the...
Rannama, Indrek; Port, Kristjan; Bazanov, Boriss
2012-01-01
Maximum gears for youth category riders are limited. As a result, youth category riders are regularly compelled to ride in a high cadence regime. The aim of this study was to investigate if regular work at high cadence regime due to limited transmission in youth category riders reflects in effectual cadence at the point of maximal power generation during the 10 second sprint effort. 24 junior and youth national team cyclist’s average maximal peak power at various cadence regimes was registere...
Evaluating the time limit at maximum aerobic speed in elite swimmers. Training implications.
Renoux, J C
2001-12-01
The aim of the present study was to make use of the concepts of maximum aerobic speed (MAS) and time limit (tlim) in order to determine the relationship between these two elements, and this in an attempt to significantly improve both speed and swimming performance during a training season. To this same end, an intermittent training model was used, which was adapted to the value obtained for the time limit at maximum aerobic speed. During a 12 week training period, the maximum aerobic speed for a group of 9 top-ranking varsity swimmers was measured on two occasions, as was the tlim. The values generated indicated that: 1) there was an inverse relationship between MAS and the time this speed could be maintained, thus confirming the studies by Billat et al. (1994b); 2) a significant increase in MAS occurred over the 12 week period, although no such evolution was seen for the tlim; 3) there was an improvement in results; 4) the time limit could be used in designing a training program based on intermittent exercises. In addition, results of the present study should allow swimming coaches to draw up individualized training programs for a given swimmer by taking into consideration maximum aerobic speed, time limit and propelling efficiency.
van de Plassche EJ; Polder MD; Canton JH
1992-01-01
In this report Maximum Permissible Concentrations (MPC) are derived for 9 trace metals based on ecotoxicological data. The elements are: antimony, barium, beryllium, cobalt, molybdenum, selenium, thallium, tin, and vanadium The study was carried out in the framework of the project "Setting int
Improved Reliability of Single-Phase PV Inverters by Limiting the Maximum Feed-in Power
Yang, Yongheng; Wang, Huai; Blaabjerg, Frede
2014-01-01
. The CPG control strategy is activated only when the DC input power from PV panels exceeds a specific power limit. It enables to limit the maximum feed-in power to the electric grids and also to improve the utilization of PV inverters. As a further study, this paper investigates the reliability performance...... of the power devices (e.g. IGBTs) used in PV inverters with the CPG control under different feed-in power limits. A long-term mission profile (i.e. solar irradiance and ambient temperature) based stress analysis approach is extended and applied to obtain the yearly electrical and thermal stresses of the power...
Sullivan, Terry [Brookhaven National Lab. (BNL), Upton, NY (United States). Biological, Environmental, and Climate Sciences Dept.
2014-12-02
ZionSolutions is in the process of decommissioning the Zion Nuclear Power Plant in order to establish a new water treatment plant. There is some residual radioactive particles from the plant which need to be brought down to levels so an individual who receives water from the new treatment plant does not receive a radioactive dose in excess of 25 mrem/y⁻¹. The objectives of this report are: (a) To present a simplified conceptual model for release from the buildings with residual subsurface structures that can be used to provide an upper bound on contaminant concentrations in the fill material; (b) Provide maximum water concentrations and the corresponding amount of mass sorbed to the solid fill material that could occur in each building for use in dose assessment calculations; (c) Estimate the maximum concentration in a well located outside of the fill material; and (d) Perform a sensitivity analysis of key parameters.
Osterloh, Frank E
2014-10-02
The Shockley-Queisser analysis provides a theoretical limit for the maximum energy conversion efficiency of single junction photovoltaic cells. But besides the semiconductor bandgap no other semiconductor properties are considered in the analysis. Here, we show that the maximum conversion efficiency is limited further by the excited state entropy of the semiconductors. The entropy loss can be estimated with the modified Sackur-Tetrode equation as a function of the curvature of the bands, the degeneracy of states near the band edges, the illumination intensity, the temperature, and the band gap. The application of the second law of thermodynamics to semiconductors provides a simple explanation for the observed high performance of group IV, III-V, and II-VI materials with strong covalent bonding and for the lower efficiency of transition metal oxides containing weakly interacting metal d orbitals. The model also predicts efficient energy conversion with quantum confined and molecular structures in the presence of a light harvesting mechanism.
Plassche EJ van de; Polder MD; Canton JH
1992-01-01
In this report Maximum Permissible Concentrations (MPC) are derived for 9 trace metals based on ecotoxicological data. The elements are: antimony, barium, beryllium, cobalt, molybdenum, selenium, thallium, tin, and vanadium The study was carried out in the framework of the project "Setting integrated environmental quality objectives". For the aquatic environment MPCs could be derived for all trace elements. These values were based on toxicity data for freshwater as well as saltwater...
Maximum Growth Potential and Periods of Resource Limitation in Apple Tree.
Reyes, Francesco; DeJong, Theodore; Franceschi, Pietro; Tagliavini, Massimo; Gianelle, Damiano
2016-01-01
Knowledge of seasonal maximum potential growth rates are important for assessing periods of resource limitations in fruit tree species. In this study we assessed the periods of resource limitation for vegetative (current year stems, and woody biomass) and reproductive (fruit) organs of a major agricultural crop: the apple tree. This was done by comparing relative growth rates (RGRs) of individual organs in trees with reduced competition for resources to trees grown under standard field conditions. Special attention was dedicated to disentangling patterns and values of maximum potential growth for each organ type. The period of resource limitation for vegetative growth was much longer than in another fruit tree species (peach): from late May until harvest. Two periods of resource limitation were highlighted for fruit: from the beginning of the season until mid-June, and about 1 month prior to harvest. By investigating the variability in individual organs growth we identified substantial differences in RGRs among different shoot categories (proleptic and epicormic) and within each group of monitored organs. Qualitatively different and more accurate values of growth rates for vegetative organs, compared to the use of the simple compartmental means, were estimated. Detailed, source-sink based tree growth models, commonly in need of fine parameter tuning, are expected to benefit from the results produced by these analyses.
Scaling of wingbeat frequency with body mass in bats and limits to maximum bat size.
Norberg, Ulla M Lindhe; Norberg, R Åke
2012-03-01
The ability to fly opens up ecological opportunities but flight mechanics and muscle energetics impose constraints, one of which is that the maximum body size must be kept below a rather low limit. The muscle power available for flight increases in proportion to flight muscle mass and wingbeat frequency. The maximum wingbeat frequency attainable among increasingly large animals decreases faster than the minimum frequency required, so eventually they coincide, thereby defining the maximum body mass at which the available power just matches up to the power required for sustained aerobic flight. Here, we report new wingbeat frequency data for 27 morphologically diverse bat species representing nine families, and additional data from the literature for another 38 species, together spanning a range from 2.0 to 870 g. For these species, wingbeat frequency decreases with increasing body mass as M(b)(-0.26). We filmed 25 of our 27 species in free flight outdoors, and for these the wingbeat frequency varies as M(b)(-0.30). These exponents are strikingly similar to the body mass dependency M(b)(-0.27) among birds, but the wingbeat frequency is higher in birds than in bats for any given body mass. The downstroke muscle mass is also a larger proportion of the body mass in birds. We applied these empirically based scaling functions for wingbeat frequency in bats to biomechanical theories about how the power required for flight and the power available converge as animal size increases. To this end we estimated the muscle mass-specific power required for the largest flying extant bird (12-16 kg) and assumed that the largest potential bat would exert similar muscle mass-specific power. Given the observed scaling of wingbeat frequency and the proportion of the body mass that is made up by flight muscles in birds and bats, we estimated the maximum potential body mass for bats to be 1.1-2.3 kg. The largest bats, extinct or extant, weigh 1.6 kg. This is within the range expected if it
Dang, Viet D.; Walters, David; Lee, Cindy M.
2016-01-01
Conifers are often used as an “air passive sampler”, but few studies have focused on the implication of broadleaf evergreens to monitor atmospheric semivolatile organic compounds such as polychlorinated biphenyls (PCBs). In this study, we used Rhododendron maximum (rhododendron) growing next to a contaminated stream to assess atmospheric PCB concentrations. The study area was located in a rural setting and approximately 2 km downstream of a former Sangamo-Weston (S-W) plant. Leaves from the same mature shrubs were collected in late fall 2010, and winter and spring 2011. PCBs were detected in the collected leaves suggesting that rhododendron can be used as air passive samplers in rural areas where active sampling is impractical. Estimated ΣPCB (47 congeners) concentrations in the atmosphere decreased from fall 2010 to spring 2011 with concentration means at 3990, 2850, and 931 pg m-3 in fall 2010, winter 2011, and spring 2011, respectively. These results indicate that the atmospheric concentrations at this location continue to be high despite termination of active discharge from the former S-W plant. Leaves had a consistent pattern of high concentrations of tetra- and penta-CBs similar to the congener distribution in polyethylene (PE) passive samplers deployed in the water column suggesting that volatilized PCBs from the stream were the primary source of contaminants in rhododendron leaves.
Fundamental and practical limits of planar tracking solar concentrators.
Grede, Alex J; Price, Jared S; Giebink, Noel C
2016-12-26
Planar microtracking provides an alternate paradigm for solar concentration that offers the possibility of realizing high-efficiency embedded concentrating photovoltaic systems in the form factor of standard photovoltaic panels. Here, we investigate the thermodynamic limit of planar tracking optical concentrators and establish that they can, in principal, achieve the sine limit of their orientationally-tracked counterparts provided that the receiver translates a minimum distance set by the field of view half-angle. We develop a phase space methodology to optimize practical planar tracking concentrators and apply it to the design of a two surface, catadioptric system that operates with > 90% optical efficiency over a 140° field of view at geometric gains exceeding 1000×. These results provide a reference point for subsequent developments in the field and indicate that planar microtracking can achieve the high optical concentration ratio required in commercial concentrating photovoltaic systems.
Seymour, Roger S
2010-09-01
Effect of size of inflorescences, flowers and cones on maximum rate of heat production is analysed allometrically in 23 species of thermogenic plants having diverse structures and ranging between 1.8 and 600 g. Total respiration rate (, micromol s(-1)) varies with spadix mass (M, g) according to in 15 species of Araceae. Thermal conductance (C, mW degrees C(-1)) for spadices scales according to C = 18.5M(0.73). Mass does not significantly affect the difference between floral and air temperature. Aroids with exposed appendices with high surface area have high thermal conductance, consistent with the need to vaporize attractive scents. True flowers have significantly lower heat production and thermal conductance, because closed petals retain heat that benefits resident insects. The florets on aroid spadices, either within a floral chamber or spathe, have intermediate thermal conductance, consistent with mixed roles. Mass-specific rates of respiration are variable between species, but reach 900 nmol s(-1) g(-1) in aroid male florets, exceeding rates of all other plants and even most animals. Maximum mass-specific respiration appears to be limited by oxygen delivery through individual cells. Reducing mass-specific respiration may be one selective influence on the evolution of large size of thermogenic flowers.
Dhara, Chirag; Kleidon, Axel
2015-01-01
Convective and radiative cooling are the two principle mechanisms by which the Earth's surface transfers heat into the atmosphere and that shape surface temperature. However, this partitioning is not sufficiently constrained by energy and mass balances alone. We use a simple energy balance model in which convective fluxes and surface temperatures are determined with the additional thermodynamic limit of maximum convective power. We then show that the broad geographic variation of heat fluxes and surface temperatures in the climatological mean compare very well with the ERA-Interim reanalysis over land and ocean. We also show that the estimates depend considerably on the formulation of longwave radiative transfer and that a spatially uniform offset is related to the assumed cold temperature sink at which the heat engine operates.
Vacca, G. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires
1967-07-01
The Task group of Committee II of the International Commission on Radiological Protection (I.C.R.P.) presided by P.E. Morrow published in 1966 the results of its work on aerosol dynamics in the respiratory tract. In that report a model was proposed for the deposition of dust in the lung and lymphatic nodes and for its clearance in the blood and/or in the gastrointestinal tract. The present report gathers the maximum permissible concentration values resulting from the application of such model. (author) [French] Le groupe de travail du Comite II de la Commission Internationale de Protection contre les Rayonnements (C.I.P.R.), preside par P.E. MORROW, a publie en 1966 les resultats de ses etudes concernant la dynamique des aerosols dans l'appareil respiratoire. Dans cette publication, un schema est propose pour le depot des poussieres dans les poumons et les ganglions lymphatiques et pour leur elimination dans le sang et/ou l'appareil digestif. La presente note rassemble les valeurs des concentrations maximales admissibles resultant de l'application d'un tel schema. (auteur)
Limit Distribution Theory for Maximum Likelihood Estimation of a Log-Concave Density.
Balabdaoui, Fadoua; Rufibach, Kaspar; Wellner, Jon A
2009-06-01
We find limiting distributions of the nonparametric maximum likelihood estimator (MLE) of a log-concave density, i.e. a density of the form f(0) = exp varphi(0) where varphi(0) is a concave function on R. Existence, form, characterizations and uniform rates of convergence of the MLE are given by Rufibach (2006) and Dümbgen and Rufibach (2007). The characterization of the log-concave MLE in terms of distribution functions is the same (up to sign) as the characterization of the least squares estimator of a convex density on [0, infinity) as studied by Groeneboom, Jongbloed and Wellner (2001b). We use this connection to show that the limiting distributions of the MLE and its derivative are, under comparable smoothness assumptions, the same (up to sign) as in the convex density estimation problem. In particular, changing the smoothness assumptions of Groeneboom, Jongbloed and Wellner (2001b) slightly by allowing some higher derivatives to vanish at the point of interest, we find that the pointwise limiting distributions depend on the second and third derivatives at 0 of H(k), the "lower invelope" of an integrated Brownian motion process minus a drift term depending on the number of vanishing derivatives of varphi(0) = log f(0) at the point of interest. We also establish the limiting distribution of the resulting estimator of the mode M(f(0)) and establish a new local asymptotic minimax lower bound which shows the optimality of our mode estimator in terms of both rate of convergence and dependence of constants on population values.
Rubanov, G.P.; Grebtsov, E.M.; Kurnosov, V.K.; Tolstoi, G.I.
1988-06-01
Recommendations of 'Instructions on determining pneumoconiosis danger of mine work in coal mines' for choice of a basic point for measuring maximum single concentration of dust along scraper longwalls do not make it possible to objectively evaluate dust load at working places. In the Instructions, a point at 10 to 15 m from exit of longwall on the ventilation drift with an emergent stream of air is proposed for the dust probe. This designated point does not take into account the influence of the scheme of ventilation of the walls on formation of dust currents. Investigations of probes taken at different places along the longwall (at the beginning, 15 m from the begining, 15 m from the end, at the niche and transfer point of the longwal) using direct and reverse flow schemes of ventilation showed that the best point for determining maximum single concentratin of dust is a point in the middle of the longwall where dust currents are the same for both systems of ventilation, and use of a new method of calculating the dust load by testing at many different positions along the scraper longall makes it possible to determine the category of pneumonoconiosis danger for workers at scraper longwalls.
Orr, John L.
1997-01-01
In many ways, the typical approach to the handling of bibliographic material for generating review articles and similar manuscripts has changed little since the use of xerographic reproduction has become widespread. The basic approach is to collect reprints of the relevant material and place it in folders or stacks based on its dominant content. As the amount of information available increases with the passage of time, the viability of this mechanical approach to bibliographic management decreases. The personal computer revolution has changed the way we deal with many familiar tasks. For example, word processing on personal computers has supplanted the typewriter for many applications. Similarly, spreadsheets have not only replaced many routine uses of calculators but have also made possible new applications because the cost of calculation is extremely low. Objective The objective of this research was to use personal computer bibliographic software technology to support the determination of spacecraft maximum acceptable concentration (SMAC) values. Specific Aims The specific aims were to produce draft SMAC documents for hydrogen sulfide and tetrachloroethylene taking maximum advantage of the bibliographic software.
Gabarro, Carolina; Turiel, Antonio; Elosegui, Pedro; Pla-Resina, Joaquim A.; Portabella, Marcos
2017-08-01
Monitoring sea ice concentration is required for operational and climate studies in the Arctic Sea. Technologies used so far for estimating sea ice concentration have some limitations, for instance the impact of the atmosphere, the physical temperature of ice, and the presence of snow and melting. In the last years, L-band radiometry has been successfully used to study some properties of sea ice, remarkably sea ice thickness. However, the potential of satellite L-band observations for obtaining sea ice concentration had not yet been explored. In this paper, we present preliminary evidence showing that data from the Soil Moisture Ocean Salinity (SMOS) mission can be used to estimate sea ice concentration. Our method, based on a maximum-likelihood estimator (MLE), exploits the marked difference in the radiative properties of sea ice and seawater. In addition, the brightness temperatures of 100 % sea ice and 100 % seawater, as well as their combined values (polarization and angular difference), have been shown to be very stable during winter and spring, so they are robust to variations in physical temperature and other geophysical parameters. Therefore, we can use just two sets of tie points, one for summer and another for winter, for calculating sea ice concentration, leading to a more robust estimate. After analysing the full year 2014 in the entire Arctic, we have found that the sea ice concentration obtained with our method is well determined as compared to the Ocean and Sea Ice Satellite Application Facility (OSI SAF) dataset. However, when thin sea ice is present (ice thickness ≲ 0.6 m), the method underestimates the actual sea ice concentration. Our results open the way for a systematic exploitation of SMOS data for monitoring sea ice concentration, at least for specific seasons. Additionally, SMOS data can be synergistically combined with data from other sensors to monitor pan-Arctic sea ice conditions.
Time-optimal excitation of maximum quantum coherence: Physical limits and pulse sequences
Köcher, S. S.; Heydenreich, T.; Zhang, Y.; Reddy, G. N. M.; Caldarelli, S.; Yuan, H.; Glaser, S. J.
2016-04-01
Here we study the optimum efficiency of the excitation of maximum quantum (MaxQ) coherence using analytical and numerical methods based on optimal control theory. The theoretical limit of the achievable MaxQ amplitude and the minimum time to achieve this limit are explored for a set of model systems consisting of up to five coupled spins. In addition to arbitrary pulse shapes, two simple pulse sequence families of practical interest are considered in the optimizations. Compared to conventional approaches, substantial gains were found both in terms of the achieved MaxQ amplitude and in pulse sequence durations. For a model system, theoretically predicted gains of a factor of three compared to the conventional pulse sequence were experimentally demonstrated. Motivated by the numerical results, also two novel analytical transfer schemes were found: Compared to conventional approaches based on non-selective pulses and delays, double-quantum coherence in two-spin systems can be created twice as fast using isotropic mixing and hard spin-selective pulses. Also it is proved that in a chain of three weakly coupled spins with the same coupling constants, triple-quantum coherence can be created in a time-optimal fashion using so-called geodesic pulses.
A comparison of muscle activity in concentric and counter movement maximum bench press.
van den Tillaar, Roland; Ettema, Gertjan
2013-01-01
The purpose of this study was to compare the kinematics and muscle activation patterns of regular free-weight bench press (counter movement) with pure concentric lifts in the ascending phase of a successful one repetition maximum (1-RM) attempt in the bench press. Our aim was to evaluate if diminishing potentiation could be the cause of the sticking region. Since diminishing potentiation cannot occur in pure concentric lifts, the occurrence of a sticking region in this type of muscle actions would support the hypothesis that the sticking region is due to a poor mechanical position. Eleven male participants (age 21.9 ± 1.7 yrs, body mass 80.7 ± 10.9 kg, body height 1.79 ± 0.07 m) conducted 1-RM lifts in counter movement and in pure concentric bench presses in which kinematics and EMG activity were measured. In both conditions, a sticking region occurred. However, the start of the sticking region was different between the two bench presses. In addition, in four of six muscles, the muscle activity was higher in the counter movement bench press compared to the concentric one. Considering the findings of the muscle activity of six muscles during the maximal lifts it was concluded that the diminishing effect of force potentiation, which occurs in the counter movement bench press, in combination with a delayed muscle activation unlikely explains the existence of the sticking region in a 1-RM bench press. Most likely, the sticking region is the result of a poor mechanical force position.
Mente, Scot; Doran, Angela; Wager, Travis T
2012-06-14
The objective of this work was to establish that unbound maximum concentrations may be reasonably predicted from a combination of computed molecular properties assuming subcutaneous (SQ) dosing. Additionally, we show that the maximum unbound plasma and brain concentrations may be projected from a mixture of in vitro absorption, distribution, metabolism, excretion experimental parameters in combination with computed properties (volume of distribution, fraction unbound in microsomes). Finally, we demonstrate the utility of the underlying equations by showing that the maximum total plasma concentrations can be projected from the experimental parameters for a set of compounds with data collected from clinical research.
Fundamental Limits to Collective Concentration Sensing in Cell Populations
Fancher, Sean; Mugler, Andrew
2017-02-01
The precision of concentration sensing is improved when cells communicate. Here we derive the physical limits to concentration sensing for cells that communicate over short distances by directly exchanging small molecules (juxtacrine signaling), or over longer distances by secreting and sensing a diffusive messenger molecule (autocrine signaling). In the latter case, we find that the optimal cell spacing can be large, due to a trade-off between maintaining communication strength and reducing signal cross-correlations. This leads to the surprising result that sparsely packed communicating cells sense concentrations more precisely than densely packed communicating cells. We compare our results to data from a wide variety of communicating cell types.
Marczak Monika
2015-09-01
Full Text Available The aim of this study was to determine the correlation between lipophilicity and maximum residue limit (MRL value specified for veterinary drugs in the fatty tissue of various animal species. The analysis was performed on a group of 73 compounds with different modes of action and MRL values determined for the fatty tissue of animals. Additionally, the logarithm of water/organic phase partition ratio (LogP and the ratio of ionised and unionised substance in buffer with pH 7.4 (LogD7.4 were calculated. The main analysis was performed after the division of the whole group into six fractions. The linear correlation and regression analysis were used to determine the indirect relationship between the mean arithmetic value of LogP or LogD7.4 in selected fractions and related LogMRL of the drugs tested. The calculations revealed a linear correlation between fractioned lipophilicity and LogMRL values for the analysed compounds. The existence of indirect relationship between lipophilicity and MRL values determined for fatty tissue was confirmed.
Maximum Parsimony and the Skewness Test: A Simulation Study of the Limits of Applicability
Määttä, Jussi; Roos, Teemu
2016-01-01
The maximum parsimony (MP) method for inferring phylogenies is widely used, but little is known about its limitations in non-asymptotic situations. This study employs large-scale computations with simulated phylogenetic data to estimate the probability that MP succeeds in finding the true phylogeny for up to twelve taxa and 256 characters. The set of candidate phylogenies are taken to be unrooted binary trees; for each simulated data set, the tree lengths of all (2n − 5)!! candidates are computed to evaluate quantities related to the performance of MP, such as the probability of finding the true phylogeny, the probability that the tree with the shortest length is unique, the probability that the true phylogeny has the shortest tree length, and the expected inverse of the number of trees sharing the shortest length. The tree length distributions are also used to evaluate and extend the skewness test of Hillis for distinguishing between random and phylogenetic data. The results indicate, for example, that the critical point after which MP achieves a success probability of at least 0.9 is roughly around 128 characters. The skewness test is found to perform well on simulated data and the study extends its scope to up to twelve taxa. PMID:27035667
Pesticide food safety standards as companions to tolerances and maximum residue limits
Carl K Winter; Elizabeth A Jara
2015-01-01
Alowable levels for pesticide residues in foods, known as tolerances in the US and as maximum residue limits (MRLs) in much of the world, are widely yet inappropriately perceived as levels of safety concern. A novel approach to develop scientiifcaly defensible levels of safety concern is presented and an example to determine acute and chronic pesticide food safety standard (PFSS) levels for the fungicide captan on strawberries is provided. Using this approach, the chronic PFSS level for captan on strawberries was determined to be 2000 mg kg–1 and the acute PFSS level was determined to be 250 mg kg–1. Both levels are far above the existing tolerance and MRLs that commonly range from 3 to 20 mg kg–1, and provide evidence that captan residues detected at levels greater than the tolerance or MRLs are not of acute or chronic health concern even though they represent violative residues. The beneifts of developing the PFSS approach to serve as a companion to existing tolerances/MRLs include a greater understanding concerning the health signiifcance, if any, from exposure to violative pesticide residues. In addition, the PFSS approach can be universaly applied to al potential pesticide residues on al food commodities, can be modiifed by speciifc jurisdictions to take into account differences in food consumption practices, and can help prioritize food residue monitoring by identifying the pesticide/commodity combinations of the greatest potential food safety concern and guiding development of ifeld level analytical methods to detect pesticide residues on prioritized pesticide/commodity combinations.
Metaproteome of the viral concentrates from the deep chlorophyll maximum of the South China Sea
Xie, Zhang-Xian; Chen, Feng; Zhang, Shu-Feng; Wang, Ming-Hua; Zhang, Hao; Kong, Ling-Fen; Dai, Min-Han; Hong, Hua-Sheng; Lin, Lin; Wang, Da-Zhi
2016-04-01
Viral concentrates (VCs) have been commonly used for studying viral diversity, viral metagenomics and virus-host interactions in the natural ecosystem. However, the protein characteristics of VCs have not been explored. Here, we applied shotgun proteomics to characterize the proteins of VCs collected from the oligotrophic deep chlorophyll maximum of the South China Sea. We found that 34% of the identified proteins were assigned to the viruses, mainly being those of SAR11 related bacteria, cyanobacteria and picophytoeukaryotes. The remaining 66% were non-viral proteins mostly originating from diverse bacteria, such as SAR324, SAR11 and the Alteromonadales, and were functionally dominated by transport, translation, sulfur metabolism and one-carbon metabolism. Among the non-viral proteins, 28% were extracellular proteins and 10% were identified exclusively in the VCs, suggesting that non-viral entities might exist in the VCs. This study demonstrated that metaproteomics provides a valuable avenue to explore not only the diversity and structure of a viral community but also the novel ecological functions affiliated with microbes in the natural environment.
The Betz-Joukowsky limit for the maximum power coefficient of wind turbines
Okulov, Valery; van Kuik, G.A.M.
2009-01-01
The article addresses to a history of an important scientific result in wind energy. The maximum efficiency of an ideal wind turbine rotor is well known as the ‘Betz limit’, named after the German scientist that formulated this maximum in 1920. Also Lanchester, a British scientist, is associated...
Effect of Limited Hydrolysis on Traditional Soy Protein Concentrate
Mirjana B. Pesic
2006-09-01
Full Text Available The influence of limited proteolysis of soy protein concentrate on proteinextractability, the composition of the extractable proteins, their emulsifying properties andsome nutritional properties were investigated. Traditional concentrate (alcohol leachedconcentrate was hydrolyzed using trypsin and pepsin as hydrolytic agents. Significantdifferences in extractable protein composition between traditional concentrate and theirhydrolysates were observed by polyacrylamide gel electrophoresis (PAGE and by SDSPAGE.All hydrolysates showed better extractability than the original protein concentrate,whereas significantly better emulsifying properties were noticed at modified concentratesobtained by trypsin induced hydrolysis. These improved properties are the result of twosimultaneous processes, dissociation and degradation of insoluble alcohol-induced proteinaggregates. Enzyme induced hydrolysis had no influence on trypsin-inibitor activity, andsignificantly reduced phytic acid content.
Fundamental limits to collective concentration sensing in cell populations
Fancher, Sean
2016-01-01
The precision of concentration sensing is improved when cells communicate. Here we derive the physical limits to concentration sensing for cells that communicate over short distances by directly exchanging small molecules (juxtacrine signaling), or over longer distances by secreting and sensing a diffusive messenger molecule (autocrine signaling). In the latter case, we find that the optimal cell spacing can be large, due to a tradeoff between maintaining communication strength and reducing signal cross-correlations. This leads to the surprising result that autocrine signaling allows more precise sensing than juxtacrine signaling for sufficiently large populations. We compare our results to data from a wide variety of communicating cell types.
Maximum detection range limitation of pulse laser radar with Geiger-mode avalanche photodiode array
Luo, Hanjun; Xu, Benlian; Xu, Huigang; Chen, Jingbo; Fu, Yadan
2015-05-01
When designing and evaluating the performance of laser radar system, maximum detection range achievable is an essential parameter. The purpose of this paper is to propose a theoretical model of maximum detection range for simulating the Geiger-mode laser radar's ranging performance. Based on the laser radar equation and the requirement of the minimum acceptable detection probability, and assuming the primary electrons triggered by the echo photons obey Poisson statistics, the maximum range theoretical model is established. By using the system design parameters, the influence of five main factors, namely emitted pulse energy, noise, echo position, atmospheric attenuation coefficient, and target reflectivity on the maximum detection range are investigated. The results show that stronger emitted pulse energy, lower noise level, more front echo position in the range gate, higher atmospheric attenuation coefficient, and higher target reflectivity can result in greater maximum detection range. It is also shown that it's important to select the minimum acceptable detection probability, which is equivalent to the system signal-to-noise ratio for producing greater maximum detection range and lower false-alarm probability.
Smit CE; Wezel AP van; Jager T; Traas TP; CSR
2000-01-01
The impact of secondary poisoning on the Maximum Permissible Concentrations (MPCs) and Negligible Concentrations (NCs) of cadmium, copper and mercury in water, sediment and soil have been evaluated. Field data on accumulation of these elements by fish, mussels and earthworms were used to derive MPC
Smit CE; Wezel AP van; Jager T; Traas TP; CSR
2000-01-01
The impact of secondary poisoning on the Maximum Permissible Concentrations (MPCs) and Negligible Concentrations (NCs) of cadmium, copper and mercury in water, sediment and soil have been evaluated. Field data on accumulation of these elements by fish, mussels and earthworms were used to derive
Role of concentric force in limiting improvement in muscular strength.
Hortobágyi, T; Katch, F I
1990-02-01
We hypothesized that resistance training with combined eccentric and concentric actions, and concentric action only, should yield similar changes in muscular strength. Subjects in a free weight group trained three times a week for 12 wk with eccentric and concentric actions (FW, n = 16), a second group trained with concentric-only contractions using hydraulic resistance (HY; n = 12), and a control group did not train (n = 11). Training for FW and HY included five sets of supine bench press and upright squat at an intensity of 1-6 repetition maximum (RM) plus five supplementary exercises at 5-10 RM for a total of 20 sets per session for approximately 50 min. Testing at pre-, mid-, and posttraining included 1) 1 RM bench press and squat with and 2) without prestretch using free weights; 3)isokinetic peak force and power for bench press and squat at 5 degrees/s, and isotonic peak velocity and power for bench press with 20-kg load and squat with 70-kg load; 4) hydraulic peak bench press force and power, and peak knee extension torque and power at fast and slow speeds; and 5) surface anthropometry (fatfolds and girths to estimate upper arm and thigh volume and muscle area). Changes in overall fatness, muscularity, and muscle + bone cross-sectional area of the limbs did not differ between groups (P greater than 0.05). Improvements in free weight bench press and squat were similar (P greater than 0.05) in FW (approximately 24%) and HY (approximately 22%, P less than 0.05).(ABSTRACT TRUNCATED AT 250 WORDS)
2012-01-01
We describe herein, limitations on research at biosafety level 4 (BSL-4) containment laboratories, with regard to biosecurity regulations, safety considerations, research space limitations, and physical constraints in executing experimental procedures. These limitations can severely impact the number of collaborations and size of research projects investigating microbial pathogens of biodefense concern. Acquisition, use, storage, and transfer of biological select agents and toxins (BSAT) are ...
Nutrient maximums related to low oxygen concentrations in the southern Canada Basin
JIN Ming-ming; SHI Jiuxin; LU Yong; CHEN Jianfang; GAO Guoping; WU Jingfeng; ZHANG Haisheng
2005-01-01
The phenomenon of nutrient maximums at 70～200 m occurred only in the region of the Canada Basin among the world oceans. The prevailing hypothesis was that the direct injection of the low-temperature high-nutrient brines from the Chukchi Sea shelf (＜50 m) in winter provided the nutrient maximums. However, we found that there are five problems in the direct injection process. Formerly Jin et al. considered that the formation of nutrient maximums can be a process of locally long-term regeneration. Here we propose a regeneration-mixture process. Data of temperature, salinity, oxygen and nutrients were collected at three stations in the southern Canada Basin during the summer 1999 cruise. We identified the cores of the surface, near-surface, potential temperature maximum waters and Arctic Bottom Water by the diagrams and vertical profiles of salinity, potential temperature, oxygen and nutrients. The historical 129Ⅰ data indicated that the surface and near-surface waters were Pacific-origin, but the waters below the potential temperature maximum core depth was Atlantic-origin. Along with the correlation of nutrient maximums and very low oxygen contents in the near-surface water, we hypothesize that, the putative organic matter was decomposed to inorganic nutrients; and the Pacific water was mixed with the Atlantic water in the transition zone. The idea of the regeneration-mixture process agrees with the historical observations of no apparent seasonal changes, the smooth nutrient profiles, the lowest saturation of CaCO3 above 400 m, low rate of CFC-11 ventilation and 3H-3He ages of 8～18 a around the nutrient maximum depths.
Ortiz-García, E. G.; Salcedo-Sanz, S.; Pérez-Bellido, A. M.; Gascón-Moreno, J.; Portilla-Figueras, A.
In this paper we present the application of a support vector regression algorithm to a real problem of maximum daily tropospheric ozone forecast. The support vector regression approach proposed is hybridized with an heuristic for optimal selection of hyper-parameters. The prediction of maximum daily ozone is carried out in all the station of the air quality monitoring network of Madrid. In the paper we analyze how the ozone prediction depends on meteorological variables such as solar radiation and temperature, and also we perform a comparison against the results obtained using a multi-layer perceptron neural network in the same prediction problem.
Shurtleff, Amy C; Garza, Nicole; Lackemeyer, Matthew; Carrion, Ricardo; Griffiths, Anthony; Patterson, Jean; Edwin, Samuel S; Bavari, Sina
2012-12-01
We describe herein, limitations on research at biosafety level 4 (BSL-4) containment laboratories, with regard to biosecurity regulations, safety considerations, research space limitations, and physical constraints in executing experimental procedures. These limitations can severely impact the number of collaborations and size of research projects investigating microbial pathogens of biodefense concern. Acquisition, use, storage, and transfer of biological select agents and toxins (BSAT) are highly regulated due to their potential to pose a severe threat to public health and safety. All federal, state, city, and local regulations must be followed to obtain and maintain registration for the institution to conduct research involving BSAT. These include initial screening and continuous monitoring of personnel, controlled access to containment laboratories, accurate and current BSAT inventory records. Safety considerations are paramount in BSL-4 containment laboratories while considering the types of research tools, workflow and time required for conducting both in vivo and in vitro experiments in limited space. Required use of a positive-pressure encapsulating suit imposes tremendous physical limitations on the researcher. Successful mitigation of these constraints requires additional time, effort, good communication, and creative solutions. Test and evaluation of novel vaccines and therapeutics conducted under good laboratory practice (GLP) conditions for FDA approval are prioritized and frequently share the same physical space with important ongoing basic research studies. The possibilities and limitations of biomedical research involving microbial pathogens of biodefense concern in BSL-4 containment laboratories are explored in this review.
Jean Patterson
2012-12-01
Full Text Available We describe herein, limitations on research at biosafety level 4 (BSL-4 containment laboratories, with regard to biosecurity regulations, safety considerations, research space limitations, and physical constraints in executing experimental procedures. These limitations can severely impact the number of collaborations and size of research projects investigating microbial pathogens of biodefense concern. Acquisition, use, storage, and transfer of biological select agents and toxins (BSAT are highly regulated due to their potential to pose a severe threat to public health and safety. All federal, state, city, and local regulations must be followed to obtain and maintain registration for the institution to conduct research involving BSAT. These include initial screening and continuous monitoring of personnel, controlled access to containment laboratories, accurate and current BSAT inventory records. Safety considerations are paramount in BSL-4 containment laboratories while considering the types of research tools, workflow and time required for conducting both in vivo and in vitro experiments in limited space. Required use of a positive-pressure encapsulating suit imposes tremendous physical limitations on the researcher. Successful mitigation of these constraints requires additional time, effort, good communication, and creative solutions. Test and evaluation of novel vaccines and therapeutics conducted under good laboratory practice (GLP conditions for FDA approval are prioritized and frequently share the same physical space with important ongoing basic research studies. The possibilities and limitations of biomedical research involving microbial pathogens of biodefense concern in BSL-4 containment laboratories are explored in this review.
Okkonen, Jarkko; Neupauer, Roseanna M.
2016-05-01
Capture zones of water supply wells are most often delineated based on travel times of water or solute to the well, with the assumption that if the travel time is sufficiently large, the concentration of chemical at the well will not exceed the drinking water standards. In many situations, the likely source concentrations or release masses of contamination from the potential sources are unknown; therefore, the exact concentration at the well cannot be determined. In situations in which the source mass can be estimated with some accuracy, the delineation of the capture zone should be based on the maximum chemical concentration that can be expected at the well, rather than on an arbitrary travel time. We present a new capture zone delineation methodology that is based on this maximum chemical concentration. The method delineates capture zones by solving the adjoint of the advection-dispersion-reaction equation and relating the adjoint state and the known release mass to the expected chemical concentration at the well. We demonstrate the use of this method through a case study in which soil heat exchange systems are potential sources of contamination. The heat exchange fluid mixtures contain known fluid volumes and chemical concentrations; thus, in the event of a release, the release mass of the chemical is known. We also demonstrate the use of a concentration basis in quantifying other measures of well vulnerability including exposure time and time to exceed a predefined threshold concentration at the well.
Maximum acceptable inherent buoyancy limit for aircrew/passenger helicopter immersion suit systems.
Brooks, C J
1988-12-01
Helicopter crew and passengers flying over cold water wear immersion suits to provide hypothermic protection in case of ditching in cold water. The suits and linings have trapped air in the material to provide the necessary insulation and are thus very buoyant. By paradox, this buoyancy may be too much for a survivor to overcome in escaping from the cabin of a rapidly sinking inverted helicopter. The Canadian General Standard Board requested that research be conducted to investigate what should be the maximum inherent buoyancy in an immersion suit that would not inhibit escape, yet would provide adequate thermal insulation. This experiment reports on 12 subjects who safely escaped with 146N (33 lbf) of added buoyancy from a helicopter underwater escape trainer. It discusses the logic for and recommendation that the inherent buoyancy in a helicopter crew/passenger immersion suit system should not exceed this figure.
Maximum precision closed-form solution for localizing diffraction-limited spots in noisy images.
Larkin, Joshua D; Cook, Peter R
2012-07-30
Super-resolution techniques like PALM and STORM require accurate localization of single fluorophores detected using a CCD. Popular localization algorithms inefficiently assume each photon registered by a pixel can only come from an area in the specimen corresponding to that pixel (not from neighboring areas), before iteratively (slowly) fitting a Gaussian to pixel intensity; they fail with noisy images. We present an alternative; a probability distribution extending over many pixels is assigned to each photon, and independent distributions are joined to describe emitter location. We compare algorithms, and recommend which serves best under different conditions. At low signal-to-noise ratios, ours is 2-fold more precise than others, and 2 orders of magnitude faster; at high ratios, it closely approximates the maximum likelihood estimate.
Patterned dye structures limit reabsorption in luminescent solar concentrators.
Tsoi, Shufen; Broer, Dirk J; Bastiaansen, Cees W; Debije, Michael G
2010-11-08
This work describes a method for limiting internal losses of a luminescent solar concentrator (LSC) due to reabsorption through patterning the fluorescent dye doped coating of the LSC. By engineering the dye coating into regular line patterns with fill factors ranging from 20 - 80%, the surface coverage of the dye molecules were reduced, thereby decreasing the probability of the re-emitted light encountering another dye molecule and the probability of reabsorption. Two types of fluorescent dyes with different quantum yields were used to examine the effects of patterning on LSC performance. The effect of various dimension and geometry of the patterns on the efficiency and edge emission of LSC are presented and analyzed.
Segal, A.; Epstein, M.
2009-08-01
A central solar plant, based on beam-down optics, is composed of a field of heliostats, a tower reflector and a ground receiver. The tower reflector is an optical system comprises of a quadric surface mirror (hyperboloid), where its upper focal point coincides with the aim point of a heliostat field and its lower focal point is located at a specified height, coinciding with the entrance plane of the ground receiver. The optics of a tower reflector requires the use of ground secondary concentrator, composed of a cluster of CPCs, because the quadric surface mirror always magnifies the sun image. There is an intrinsic correlation between the tower reflector position and its size on one hand, and the geometry, dimensions and reflective area of the secondary concentrator on the other hand; both are related to the heliostat field reflective area. Obviously, when one wishes to have a smaller tower reflector by placing it closer to the upper focal point, the image created at the lower focus will be larger, resulting in a larger secondary ground concentrator. The present work analyses the ways for a substantial decrease of the size of the ground concentrator cluster (and, implicit, the concentrators area) via truncation, without significant sacrifice of the performance, although some increase of the optical losses is inevitable. This offers a method for cost effective design of future central solar plants utilizing the beam down optics.
Pushing desalination recovery to the maximum limit: Membrane and thermal processes integration
Shahzad, Muhammad Wakil
2017-05-05
The economics of seawater desalination processes has been continuously improving as a result of desalination market expansion. Presently, reverse osmosis (RO) processes are leading in global desalination with 53% share followed by thermally driven technologies 33%, but in Gulf Cooperation Council (GCC) countries their shares are 42% and 56% respectively due to severe feed water quality. In RO processes, intake, pretreatment and brine disposal cost 25% of total desalination cost at 30–35% recovery. We proposed a tri-hybrid system to enhance overall recovery up to 81%. The conditioned brine leaving from RO processes supplied to proposed multi-evaporator adsorption cycle driven by low temperature industrial waste heat sources or solar energy. RO membrane simulation has been performed using WinFlow and IMSDesign commercial softwares developed by GE and Nitto. Detailed mathematical model of overall system is developed and simulation has been conducted in FORTRAN. The final brine reject concentration from tri-hybrid cycle can vary from 166,000ppm to 222,000ppm if RO retentate concentration varies from 45,000ppm to 60,000ppm. We also conducted economic analysis and showed that the proposed tri-hybrid cycle can achieve highest recovery, 81%, and lowest energy consumption, 1.76kWhelec/m3, for desalination reported in the literature up till now.
Gutierrez-Jurado, H. A.; Guan, H.; Wang, J.; Wang, H.; Bras, R. L.; Simmons, C. T.
2015-12-01
Quantification of evapotranspiration (ET) and its partition over regions of heterogeneous topography and canopy poses a challenge using traditional approaches. In this study, we report the results of a novel field experiment design guided by the Maximum Entropy Production model of ET (MEP-ET), formulated for estimating evaporation and transpiration from homogeneous soil and canopy. A catchment with complex terrain and patchy vegetation in South Australia was instrumented to measure temperature, humidity and net radiation at soil and canopy surfaces. Performance of the MEP-ET model to quantify transpiration and soil evaporation was evaluated during wet and dry conditions with independently and directly measured transpiration from sapflow and soil evaporation using the Bowen Ratio Energy Balance (BREB). MEP-ET transpiration shows remarkable agreement with that obtained through sapflow measurements during wet conditions, but consistently overestimates the flux during dry periods. However, an additional term introduced to the original MEP-ET model accounting for higher stomatal regulation during dry spells, based on differences between leaf and air vapor pressure deficits and temperatures, significantly improves the model performance. On the other hand, MEP-ET soil evaporation is in good agreement with that from BREB regardless of moisture conditions. The experimental design allows a plot and tree scale quantification of evaporation and transpiration respectively. This study confirms for the first time that the MEP-ET originally developed for homogeneous open bare soil and closed canopy can be used for modeling ET over heterogeneous land surfaces. Furthermore, we show that with the addition of an empirical function simulating the plants ability to regulate transpiration, and based on the same measurements of temperature and humidity, the method can produce reliable estimates of ET during both wet and dry conditions without compromising its parsimony.
Zile, M R; Izzi, G; Gaasch, W H
1991-02-01
We tested the hypothesis that maximum systolic elastance (Emax) fails to detect a decline in left ventricular (LV) contractile function when diastolic dysfunction is present. Canine hearts were studied in an isolated blood-perfused heart apparatus (isovolumic LV); contractile dysfunction was produced by 60 or 90 minutes of global ischemia, followed by 90 minutes of reperfusion. Nine normal hearts underwent 60 minutes of ischemia, and five underwent 90 minutes of ischemia. After the ischemia-reperfusion sequence, developed pressure, pressure-volume area, and myocardial ATP level were significantly less than those at baseline in all 14 hearts. In the group undergoing 60 minutes of ischemia, LV diastolic pressure did not increase, whereas Emax decreased from 5.2 +/- 2.5 to 2.9 +/- 1.4 mm Hg/ml (p less than 0.05). In the group undergoing 90 minutes of ischemia, diastolic pressure increased (from 10 +/- 2 to 37 +/- 20 mm Hg, p less than 0.05), and Emax did not change significantly (from 5.1 +/- 4.3 to 4.3 +/- 2.5 mm Hg/ml). A second series of experiments was performed in 13 hearts with pressure-overload hypertrophy (aortic-band model with echocardiography and catheterization studies before the ischemia-reperfusion protocol). Five had evidence for pump failure, whereas eight remained compensated. After 60 minutes of ischemia and 90 minutes of reperfusion, developed pressure, pressure-volume area, and myocardial ATP level were significantly less than those at baseline in all 13 hearts. In the group with compensated LV hypertrophy, LV diastolic pressure did not change, whereas Emax decreased from 6.9 +/- 3.0 to 3.1 +/- 2.3 mm Hg/ml (p less than 0.05).(ABSTRACT TRUNCATED AT 250 WORDS)
Longitudinal Examination of Age-Predicted Symptom-Limited Exercise Maximum Heart Rate
Zhu, Na; Suarez, Jose; Sidney, Steve; Sternfeld, Barbara; Schreiner, Pamela J.; Carnethon, Mercedes R.; Lewis, Cora E.; Crow, Richard S.; Bouchard, Claude; Haskell, William; Jacobs, David R.
2010-01-01
Purpose To estimate the association of age with maximal heart rate (MHR). Methods Data were obtained in the Coronary Artery Risk Development in Young Adults (CARDIA) study. Participants were black and white men and women aged 18-30 in 1985-86 (year 0). A symptom-limited maximal graded exercise test was completed at years 0, 7, and 20 by 4969, 2583, and 2870 participants, respectively. After exclusion 9622 eligible tests remained. Results In all 9622 tests, estimated MHR (eMHR, beats/minute) had a quadratic relation to age in the age range 18 to 50 years, eMHR=179+0.29*age-0.011*age2. The age-MHR association was approximately linear in the restricted age ranges of consecutive tests. In 2215 people who completed both year 0 and 7 tests (age range 18 to 37), eMHR=189–0.35*age; and in 1574 people who completed both year 7 and 20 tests (age range 25 to 50), eMHR=199–0.63*age. In the lowest baseline BMI quartile, the rate of decline was 0.20 beats/minute/year between years 0-7 and 0.51 beats/minute/year between years 7-20; while in the highest baseline BMI quartile there was a linear rate of decline of approximately 0.7 beats/minute/year over the full age of 18 to 50 years. Conclusion Clinicians making exercise prescriptions should be aware that the loss of symptom-limited MHR is much slower at young adulthood and more pronounced in later adulthood. In particular, MHR loss is very slow in those with lowest BMI below age 40. PMID:20639723
Limits to anaerobic energy and cytosolic concentration in the living cell
Paglietti, A.
2015-11-01
For many physical systems at any given temperature, the set of all states where the system's free energy reaches its largest value can be determined from the system's constitutive equations of internal energy and entropy, once a state of that set is known. Such an approach is fraught with complications when applied to a living cell, because the cell's cytosol contains thousands of solutes, and thus thousands of state variables, which makes determination of its state impractical. We show here that, when looking for the maximum energy that the cytosol can store and release, detailed information on cytosol composition is redundant. Compatibility with cell's life requires that a single variable that represents the overall concentration of cytosol solutes must fall between defined limits, which can be determined by dehydrating and overhydrating the cell to its maximum capacity. The same limits are shown to determine, in particular, the maximum amount of free energy that a cell can supply in fast anaerobic processes, starting from any given initial state. For a typical skeletal muscle in normal physiological conditions this energy, i.e., the maximum anaerobic capacity to do work, is calculated to be about 960 J per kg of muscular mass. Such energy decreases as the overall concentration of solutes in the cytosol is increased. Similar results apply to any kind of cell. They provide an essential tool to understand and control the macroscopic response of single cells and multicellular cellular tissues alike. The applications include sport physiology, cell aging, disease produced cell damage, drug absorption capacity, to mention the most obvious ones.
2010-07-01
... Measurements Required, and Maximum Discrepancy Specification C Table C-1 to Subpart C of Part 53 Protection of... Reference Methods Pt. 53, Subpt. C, Table C-1 Table C-1 to Subpart C of Part 53—Test Concentration Ranges... 0.25 to 0.35 2 2 .03 Total 7 8 Effective Date Note: At 75 FR 35601, June 22, 2010, table C-1 to...
Alfafara, C G; Miura, K; Shimizu, H; Shioya, S; Suga, K; Suzuki, K
1993-02-20
A fuzzy logic controller (FLC) for the control of ethanol concentration was developed and utilized to realize the maximum production of glutathione (GSH) in yeast fedbatch culture. A conventional fuzzy controller, which uses the control error and its rate of change in the premise part of the linguistic rules, worked well when the initial error of ethanol concentration was small. However, when the initial error was large, controller overreaction resulted in an overshoot.An improved fuzzy controller was obtained to avoid controller overreaction by diagnostic determination of "glucose emergency states" (i.e., glucose accumulation or deficiency), and then appropriate emergency control action was obtained by the use of weight coefficients and modification of linguistic rules to decrease the overreaction of the controller when the fermentation was in the emergency state. The improved fuzzy controller was able to control a constant ethanol concentration under conditions of large initial error.The improved fuzzy control system was used in the GSH production phase of the optimal operation to indirectly control the specific growth rate mu to its critical value micro(c). In the GSH production phase of the fed-batch culture, the optimal solution was to control micro to micro(c) in order to maintain a maximum specific GSH production rate. The value of micro(c) also coincided with the critical specific growth rate at which no ethanol formation occurs. Therefore, the control of micro to micro(c) could be done indirectly by maintaining a constant ethanol concentration, that is, zero net ethanol formation, through proper manipulation of the glucose feed rate. Maximum production of GSH was realized using the developed FLC; maximum production was a consequence of the substrate feeding strategy and cysteine addition, and the FLC was a simple way to realize the strategy.
Schiefelbein, Sarah; Fröhlich, Alexander; John, Gernot T; Beutler, Falco; Wittmann, Christoph; Becker, Judith
2013-08-01
Dissolved oxygen plays an essential role in aerobic cultivation especially due to its low solubility. Under unfavorable conditions of mixing and vessel geometry it can become limiting. This, however, is difficult to predict and thus the right choice for an optimal experimental set-up is challenging. To overcome this, we developed a method which allows a robust prediction of the dissolved oxygen concentration during aerobic growth. This integrates newly established mathematical correlations for the determination of the volumetric gas-liquid mass transfer coefficient (kLa) in disposable shake-flasks from the filling volume, the vessel size and the agitation speed. Tested for the industrial production organism Corynebacterium glutamicum, this enabled a reliable design of culture conditions and allowed to predict the maximum possible cell concentration without oxygen limitation.
Limit of stokesian settling concentration characterizes sludge settling velocity.
Mancell-Egala, William A S K; Kinnear, David J; Jones, Kimberly L; De Clippeleir, Haydée; Takács, Imre; Murthy, Sudhir N
2016-03-01
Flocculent settling (stokesian) is predominant within ideally operating clarifiers, and the shift to 'slower' hindered settling (non-stokesian) causes both failure and poor effluent quality. Therefore, a new metric for settling characteristics was developed and classified as Limit of Stokesian Settling (LOSS). The technique consisted of determining the total suspended solids (TSS) concentration at which mixed liquor settling characteristics transition from stokesian to non-stokesian settling. An image analytical technique was developed with the aid of MATLAB(®) to identify this transition. The MATLAB tool analyzed RGB images from video, and identified the presence of an interface by a dramatic shift in the Red indices. LOSS data for Secondary activated-sludge systems were analyzed for a period of 60 days at the Blue Plains Advanced Wastewater Treatment Plant. LOSS for secondary systems typically occurred between 600 and 700 mg TSS/L but reached 1000 mg TSS/L for a good settling secondary sludge and 500 mg TSS/L for a poor settling secondary sludge, settling quality was based on hindered settling rates. In addition, LOSS was collected for granular systems seeded with cyclone underflow from Strass Wastewater Treatment Plant, it was observed that LOSS was higher for granular systems ranging from 1600 to 5500 mg TSS/L for low and high levels of granulation, respectively. The monovalent to divalent cation ratio (M/D) was increased with the addition of sodium ions to deteriorate settling properties. Samples adjusted with higher M/D consistently had 100 mg TSS/L (15%) decrease in LOSS from the control. LOSS numbers collected experimentally were validated with the Takacs et al. (1991) settling model. When compared to flux curves with small changes in sludge matrix, LOSS was proven to be faster at characterizing hindered settling velocity and was less erratic. This is the first time a measurement method has been developed to characterize the transition from stokesian
Ahmadian, Radin
2010-09-01
This study investigated the relationship of anthocyanin concentration from different organic fruit species and output voltage and current in a TiO2 dye-sensitized solar cell (DSSC) and hypothesized that fruits with greater anthocyanin concentration produce higher maximum power point (MPP) which would lead to higher current and voltage. Anthocyanin dye solution was made with crushing of a group of fresh fruits with different anthocyanin content in 2 mL of de-ionized water and filtration. Using these test fruit dyes, multiple DSSCs were assembled such that light enters through the TiO2 side of the cell. The full current-voltage (I-V) co-variations were measured using a 500 Ω potentiometer as a variable load. Point-by point current and voltage data pairs were measured at various incremental resistance values. The maximum power point (MPP) generated by the solar cell was defined as a dependent variable and the anthocyanin concentration in the fruit used in the DSSC as the independent variable. A regression model was used to investigate the linear relationship between study variables. Regression analysis showed a significant linear relationship between MPP and anthocyanin concentration with a p-value of 0.007. Fruits like blueberry and black raspberry with the highest anthocyanin content generated higher MPP. In a DSSC, a linear model may predict MPP based on the anthocyanin concentration. This model is the first step to find organic anthocyanin sources in the nature with the highest dye concentration to generate energy.
Sullivan, Terry [Brookhaven National Lab. (BNL), Upton, NY (United States). Biological, Environmental and Climate Sciences Dept.
2014-12-10
ZionSolutions is in the process of decommissioning the Zion Nuclear Power Plant in order to establish a new water treatment plant. There is some residual radioactive particles from the plant which need to be brought down to levels so an individual who receives water from the new treatment plant does not receive a radioactive dose in excess of 25 mrem/y⁻¹ as specified in 10 CFR 20 Subpart E. The objectives of this report are: (a) To present a simplified conceptual model for release from the buildings with residual subsurface structures that can be used to provide an upper bound on radionuclide concentrations in the fill material and the water in the interstitial spaces of the fill. (b) Provide maximum water concentrations and the corresponding amount of mass sorbed to the solid fill material that could occur in each building for use by ZSRP in selecting ROCs for detailed dose assessment calculations.
Held, Louis F.; Pritchard, Ernest I.
1946-01-01
An investigation was conducted to evaluate the possibilities of utilizing the high-performance characteristics of triptane and xylidines blended with 28-R fuel in order to increase fuel economy by the use of high compression ratios and maximum-economy spark setting. Full-scale single-cylinder knock tests were run with 20 deg B.T.C. and maximum-economy spark settings at compression ratios of 6.9, 8.0, and 10.0, and with two inlet-air temperatures. The fuels tested consisted of triptane, four triptane and one xylidines blend with 28-R, and 28-R fuel alone. Indicated specific fuel consumption at lean mixtures was decreased approximately 17 percent at a compression ratio of 10.0 and maximum-economy spark setting, as compared to that obtained with a compression ratio of 6.9 and normal spark setting. When compression ratio was increased from 6.9 to 10.0 at an inlet-air temperature of 150 F, normal spark setting, and a fuel-air ratio of 0.065, 55-percent triptane was required with 28-R fuel to maintain the knock-limited brake power level obtained with 28-R fuel at a compression ratio of 6.9. Brake specific fuel consumption was decreased 17.5 percent at a compression ratio of 10.0 relative to that obtained at a compression ratio of 6.9. Approximately similar results were noted at an inlet-air temperature of 250 F. For concentrations up through at least 20 percent, triptane can be more efficiently used at normal than at maximum-economy spark setting to maintain a constant knock-limited power output over the range of compression ratios tested.
40 CFR 227.27 - Limiting permissible con-cen-tra-tion (LPC).
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Limiting permissible con-cen-tra-tion (LPC). 227.27 Section 227.27 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Definitions § 227.27 Limiting permissible con-cen-tra-tion (LPC). (a) The limiting permissible concentration...
2011-02-08
...; ] FINANCIAL STABILITY OVERSIGHT COUNCIL Recommendations Regarding Modifications to the Concentration Limit on...'' or ``Dodd-Frank Act'') establishes a financial sector concentration limit that generally prohibits a...\\ This concentration limit is intended, along with a number of other provisions in the Dodd-Frank Act, to...
Recommended Concentration Limits of Typical Indoor Air Contaminants
LV Chao; JIANG Yun-tao; ZHAO Jia-ning
2009-01-01
From the view of both objective and subjective factors.the indoor air quality(IAQ)evaluation was considered.Carbon dioxide (CO2) and formaldehyde (HCHO) were selected as the typical contaminants of indoor air,and the evaluation method of logarithmic index was adopted as the evaluation means of IAQ.Then the recommended limits (RL) of typical contaminants CO2 and HCHO were given through analysis and calcula-tion.The limits of CO2 and HCHO in Indoor Air Quahty Standard of China or other existing standards probably correspond to the level of PD=25(%).The result shows that the existing standards fail to meet the require-ment of the definition of"acceptable indoor air quality",that is to say,less than 20% of the people express dis-satisfaction.When PD=20%,RL of CO2 and HCHO are 728×10-6 and 0.068×10-6 respectively,which are stricter than the limits in the existing standards.The method proposed in this paper is applicable to 13.1%≤PD≤86.7%.
Kinoshita, Takashi, E-mail: tkino@med.kurume-u.ac.jp [Division of Respirology, Neurology, and Rheumatology, Department of Medicine, Kurume University School of Medicine, Kurume (Japan); Kawayama, Tomotaka, E-mail: kawayama_tomotaka@med.kurume-u.ac.jp [Division of Respirology, Neurology, and Rheumatology, Department of Medicine, Kurume University School of Medicine, Kurume (Japan); Imamura, Youhei, E-mail: mamura_youhei@med.kurume-u.ac.jp [Division of Respirology, Neurology, and Rheumatology, Department of Medicine, Kurume University School of Medicine, Kurume (Japan); Sakazaki, Yuki, E-mail: sakazaki@med.kurume-u.ac.jp [Division of Respirology, Neurology, and Rheumatology, Department of Medicine, Kurume University School of Medicine, Kurume (Japan); Hirai, Ryo, E-mail: hirai_ryou@kurume-u.ac.jp [Division of Respirology, Neurology, and Rheumatology, Department of Medicine, Kurume University School of Medicine, Kurume (Japan); Ishii, Hidenobu, E-mail: shii_hidenobu@med.kurume-u.ac.jp [Division of Respirology, Neurology, and Rheumatology, Department of Medicine, Kurume University School of Medicine, Kurume (Japan); Suetomo, Masashi, E-mail: jin_t_f_c@yahoo.co.jp [Division of Respirology, Neurology, and Rheumatology, Department of Medicine, Kurume University School of Medicine, Kurume (Japan); Matsunaga, Kazuko, E-mail: kmatsunaga@kouhoukai.or.jp [Division of Respirology, Neurology, and Rheumatology, Department of Medicine, Kurume University School of Medicine, Kurume (Japan); Azuma, Koichi, E-mail: azuma@med.kurume-u.ac.jp [Division of Respirology, Neurology, and Rheumatology, Department of Medicine, Kurume University School of Medicine, Kurume (Japan); Fujimoto, Kiminori, E-mail: kimichan@med.kurume-u.ac.jp [Department of Radiology, Kurume University School of Medicine, Kurume (Japan); Hoshino, Tomoaki, E-mail: hoshino@med.kurume-u.ac.jp [Division of Respirology, Neurology, and Rheumatology, Department of Medicine, Kurume University School of Medicine, Kurume (Japan)
2015-04-15
Highlights: •It is often to use computed tomography (CT) scan for diagnosis of chronic obstructive pulmonary disease. •CT scan is more expensive and higher. •A plane chest radiography more simple and cheap. Moreover, it is useful as detection of pulmonary emphysema, but not airflow limitation. •Our study demonstrated that the maximum inspiratory and expiratory plane chest radiography technique could detect severe airflow limitations. •We believe that the technique is helpful to diagnose the patients with chronic obstructive pulmonary disease. -- Abstract: Background: The usefulness of paired maximum inspiratory and expiratory (I/E) plain chest radiography (pCR) for diagnosis of chronic obstructive pulmonary disease (COPD) is still unclear. Objectives: We examined whether measurement of the I/E ratio using paired I/E pCR could be used for detection of airflow limitation in patients with COPD. Methods: Eighty patients with COPD (GOLD stage I = 23, stage II = 32, stage III = 15, stage IV = 10) and 34 control subjects were enrolled. The I/E ratios of frontal and lateral lung areas, and lung distance between the apex and base on pCR views were analyzed quantitatively. Pulmonary function parameters were measured at the same time. Results: The I/E ratios for the frontal lung area (1.25 ± 0.01), the lateral lung area (1.29 ± 0.01), and the lung distance (1.18 ± 0.01) were significantly (p < 0.05) reduced in COPD patients compared with controls (1.31 ± 0.02 and 1.38 ± 0.02, and 1.22 ± 0.01, respectively). The I/E ratios in frontal and lateral areas, and lung distance were significantly (p < 0.05) reduced in severe (GOLD stage III) and very severe (GOLD stage IV) COPD as compared to control subjects, although the I/E ratios did not differ significantly between severe and very severe COPD. Moreover, the I/E ratios were significantly correlated with pulmonary function parameters. Conclusions: Measurement of I/E ratios on paired I/E pCR is simple and
Arriagada, Manuel; Cipagauta, Carolina; Foppiano, Alberto
2013-05-01
A simple semi-empirical model to determine the maximum electron concentration in the ionosphere (NmF2) for South American locations is used to calculate NmF2 for a northern hemisphere station in the same longitude sector. NmF2 is determined as the sum of two terms, one related to photochemical and diffusive processes and the other one to transport mechanisms. The model gives diurnal variations of NmF2 representative for winter, summer and equinox conditions, during intervals of high and low solar activity. Model NmF2 results are compared with ionosonde observations made at Toluca-México (19.3°N; 260°E). Differences between model results and observations are similar to those corresponding to comparisons with South American observations. It seems that further improvement of the model could be made by refining the latitude dependencies of coefficients used for the transport term.
Liang Xu
2015-01-01
Full Text Available Aiming to reduce the number of crashes caused by speeding at night on road section with a crosswalk, a study was conducted on the maximum speed limit and safe average luminance at night. In order to investigate the potential relationship between drivers’ recognitive characteristics and driving speed under different road lighting features, data of remaining driving time (period from the time that crossing pedestrian is recognized to the time that vehicle arrives at crosswalk with an uniform speed were recorded. The results of the data analysis show that it is more difficult for divers to recognize crossing pedestrian at night when a single pedestrian is statistic and wears dark clothes. The remaining driving time decreases with the increase of driving speed and the decrease of road luminance. With the collected data, several multivariate nonlinear regression models were established to capture the relationship among the variables of remaining driving time at night, the driving speed, and the average luminance. Then the modeling results were used to develop the reasonable speed limit and safe average luminance by physical equations. The case studies are also introduced at the end of the paper.
Hu, Kaifeng; Ellinger, James J; Chylla, Roger A; Markley, John L
2011-12-15
Time-zero 2D (13)C HSQC (HSQC(0)) spectroscopy offers advantages over traditional 2D NMR for quantitative analysis of solutions containing a mixture of compounds because the signal intensities are directly proportional to the concentrations of the constituents. The HSQC(0) spectrum is derived from a series of spectra collected with increasing repetition times within the basic HSQC block by extrapolating the repetition time to zero. Here we present an alternative approach to data collection, gradient-selective time-zero (1)H-(13)C HSQC(0) in combination with fast maximum likelihood reconstruction (FMLR) data analysis and the use of two concentration references for absolute concentration determination. Gradient-selective data acquisition results in cleaner spectra, and NMR data can be acquired in both constant-time and non-constant-time mode. Semiautomatic data analysis is supported by the FMLR approach, which is used to deconvolute the spectra and extract peak volumes. The peak volumes obtained from this analysis are converted to absolute concentrations by reference to the peak volumes of two internal reference compounds of known concentration: DSS (4,4-dimethyl-4-silapentane-1-sulfonic acid) at the low concentration limit (which also serves as chemical shift reference) and MES (2-(N-morpholino)ethanesulfonic acid) at the high concentration limit. The linear relationship between peak volumes and concentration is better defined with two references than with one, and the measured absolute concentrations of individual compounds in the mixture are more accurate. We compare results from semiautomated gsHSQC(0) with those obtained by the original manual phase-cycled HSQC(0) approach. The new approach is suitable for automatic metabolite profiling by simultaneous quantification of multiple metabolites in a complex mixture.
Janská, Veronika; Jiménez-Alfaro, Borja; Chytrý, Milan; Divíšek, Jan; Anenkhonov, Oleg; Korolyuk, Andrey; Lashchinskyi, Nikolai; Culek, Martin
2017-03-01
We modelled the European distribution of vegetation types at the Last Glacial Maximum (LGM) using present-day data from Siberia, a region hypothesized to be a modern analogue of European glacial climate. Distribution models were calibrated with current climate using 6274 vegetation-plot records surveyed in Siberia. Out of 22 initially used vegetation types, good or moderately good models in terms of statistical validation and expert-based evaluation were computed for 18 types, which were then projected to European climate at the LGM. The resulting distributions were generally consistent with reconstructions based on pollen records and dynamic vegetation models. Spatial predictions were most reliable for steppe, forest-steppe, taiga, tundra, fens and bogs in eastern and central Europe, which had LGM climate more similar to present-day Siberia. The models for western and southern Europe, regions with a lower degree of climatic analogy, were only reliable for mires and steppe vegetation, respectively. Modelling LGM vegetation types for the wetter and warmer regions of Europe would therefore require gathering calibration data from outside Siberia. Our approach adds value to the reconstruction of vegetation at the LGM, which is limited by scarcity of pollen and macrofossil data, suggesting where specific habitats could have occurred. Despite the uncertainties of climatic extrapolations and the difficulty of validating the projections for vegetation types, the integration of palaeodistribution modelling with other approaches has a great potential for improving our understanding of biodiversity patterns during the LGM.
Beltrán, M C; Romero, T; Althaus, R L; Molina, M P
2013-01-01
The Charm maximum residue limit β-lactam and tetracycline test (Charm MRL BLTET; Charm Sciences Inc., Lawrence, MA) is an immunoreceptor assay utilizing Rapid One-Step Assay lateral flow technology that detects...
NONE
2015-11-01
The book on the MAK (maximum permissible concentrations at the place of work) and BAT (biological tolerance values for working materials) value list 2015 includes the following chapters: (a) Maximum permissible concentrations at the place of work: definition, application and determination of MAT values, list of materials; carcinogenic working materials, sensibilizing working materials, aerosols, limiting the exposition peaks, skin resorption, MAK values during pregnancy, germ cell mutagens, specific working materials; (b) Biological tolerance values for working materials: definition and application of BAT values, list of materials, carcinogenic working materials, biological guide values, biological working material reference values.
NONE
2013-08-01
The book on the MAK (maximum permissible concentrations at the place of work) and BAT (biological tolerance values for working materials) value list 2013 includes the following chapters: (a) Maximum permissible concentrations at the place of work: definition, application and determination of MAT values, list of materials; carcinogenic working materials, sensibilizing working materials, aerosols, limiting the exposition peaks, skin resorption, MAK values during pregnancy, germ cell mutagens, specific working materials; (b) Biological tolerance values for working materials: definition and application of BAT values, list of materials, carcinogenic working materials, biological guide values, biological working material reference values.
NONE
2014-11-01
The book on the MAK (maximum permissible concentrations at the place of work) and BAT (biological tolerance values for working materials) value list 2014 includes the following chapters: (a) Maximum permissible concentrations at the place of work: definition, application and determination of MAT values, list of materials; carcinogenic working materials, sensibilizing working materials, aerosols, limiting the exposition peaks, skin resorption, MAK values during pregnancy, germ cell mutagens, specific working materials; (b) Biological tolerance values for working materials: definition and application of BAT values, list of materials, carcinogenic working materials, biological guide values, biological working material reference values.
S. Gannouni
2016-01-01
Full Text Available In a tunnel fire, the production of smoke and toxic gases remains the principal prejudicial factors to users. The heat is not considered as a major direct danger to users since temperatures up to man level do not reach tenable situations that after a relatively long time except near the fire source. However, the temperatures under ceiling can exceed the thresholds conditions and can thus cause structural collapse of infrastructure. This paper presents a numerical analysis of smoke hazard in tunnel fires with different aspect ratio by large eddy simulation. Results show that the CO concentration increases as the aspect ratio decreases and decreases with the longitudinal ventilation velocity. CFD predicted maximum smoke temperatures are compared to the calculated values using the model of Li et al. and then compared with those given by the empirical equation proposed by kurioka et al. A reasonable good agreement has been obtained. The backlayering length decreases as the ventilation velocity increases and this decrease fell into good exponential decay. The dimensionless interface height and the region of bad visibility increases with the aspect ratio of the tunnel cross-sectional geometry.
40 CFR 52.277 - Oxides of nitrogen, combustion gas concentration limitations.
2010-07-01
... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Oxides of nitrogen, combustion gas concentration limitations. 52.277 Section 52.277 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Oxides of nitrogen, combustion gas concentration limitations. (a) The following rules are being retained...
Mikosch, Thomas Valentin; Moser, Martin
2013-01-01
We investigate the maximum increment of a random walk with heavy-tailed jump size distribution. Here heavy-tailedness is understood as regular variation of the finite-dimensional distributions. The jump sizes constitute a strictly stationary sequence. Using a continuous mapping argument acting on...... on the point processes of the normalized jump sizes, we prove that the maximum increment of the random walk converges in distribution to a Fréchet distributed random variable....
Berner, Urs
1999-12-01
The Swiss repository concept for long-lived, intermediate-level radioactive wastes (LMA), in Swiss terminology) foresees cylindrical concrete silos surrounded by a ring of granulated bentonite to deposit the waste. As one of the possible options and similar to the repository for high level wastes, the silos will be located in a deep crystalline host rock. Solidified with concrete in steel drums, the waste is stacked into a silo and the silo is then backfilled with a porous mortar. To characterize the release of radionuclides from the repository, the safety assessment considers first the dissolution into the pore water of the concrete, and then diffusion through the outer bentonite ring into the deep crystalline groundwater. For 19 safety relevant radionuclides (isotopes of U, Th, Pa, Np, Pu, Am, Ni, Zr, Mo, Nb, Se, Sr, Ra, Tc, Sn, I, C, Cs, Cl) the report recommends maximum elemental concentrations to be expected in the cement pore water of the particularly considered repository. These limits will form the parameter base for subsequent release model chains. Concentration limits in a geochemical environment are usually obtained from thermodynamic equilibrium calculations performed with geochemical speciation codes. However, earlier studies revealed that this procedure does not always lead to reliable results. Main reasons for this are the complexity of the systems considered, as well as the lacking completeness of, and the uncertainty associated with the thermodynamic data. To improve the recommended maximum concentrations for a distinct repository design, this work includes additional design- and system-dependent criteria. The following processes, inventories and properties are considered in particular: a) recent experimental investigations, particularly from cement systems, b) thermodynamic model calculations when reliable data are available, c) total inventories of radionuclides, d) sorption- and co-precipitation processes, e) dilution with stable isotopes, f
Detection Limit of Glucose Concentration with Near-Infrared Absorption and Scattering Spectroscopy
LUO Yun-Han; HUANG Fu-Rong; LI Shi-Ping; CHEN Zhe
2008-01-01
@@ Theoretical analyses and Monte Carlo simulation are performed to investigate the detection limit of glucose concentration with near-infrared spectroscopy.The relation between detection limitation of glucose concentration and source-detector separation is derived.Monte Carlo simulation performed with a skin-layered model shows that the ratio of effective photons from the target layer could excess 50% by selecting proper source-detector separation,and that the detection limit of glucose concentration approaches to 0.28mM,which satisfies the requirement of food and drug administration for noninvasive glucose sensing.
Lorenz, Ralph D
2010-05-12
The 'two-box model' of planetary climate is discussed. This model has been used to demonstrate consistency of the equator-pole temperature gradient on Earth, Mars and Titan with what would be predicted from a principle of maximum entropy production (MEP). While useful for exposition and for generating first-order estimates of planetary heat transports, it has too low a resolution to investigate climate systems with strong feedbacks. A two-box MEP model agrees well with the observed day : night temperature contrast observed on the extrasolar planet HD 189733b.
La Vincente, S F; Peel, D; Carai, S; Weber, M W; Enarson, P; Maganga, E; Soyolgerel, G; Duke, T
2011-05-01
The paediatric wards of hospitals in Malawi and Mongolia. To describe oxygen concentrator functioning in two countries with widespread, long-term use of concentrators as a primary source of oxygen for treating children. A systematic assessment of concentrators in the paediatric wards of 15 hospitals in Malawi and nine hospitals in Mongolia. Oxygen concentrators had been installed for a median of 48 months (interquartile range [IQR] 6-60) and 36 months (IQR 12-96), respectively, prior to the evaluation in Malawi and Mongolia. Concentrators were the primary source of oxygen. Three quarters of the concentrators assessed in Malawi (28/36) and half those assessed in Mongolia (13/25) were functional. Concentrators were found to remain functional with up to 30 000 h of use. However, several concentrators were functioning very poorly despite limited use. Concentrators from a number of different manufacturers were evaluated, and there was marked variation in performance between brands. Inadequate resources for maintenance were reported in both countries. Years after installation of oxygen concentrators, many machines were still functioning, indicating that widespread use can be sustained in resource-limited settings. However, concentrator performance varied substantially. Procurement of high-quality and appropriate equipment is critical, and resources should be made available for ongoing maintenance.
Lee, Kab-Jae; Kim, Sol; Lee, Ju; Oh, Jae-Eung
2003-05-01
A brushless dc (BLDC) motor, which has a permanent magnet (PM) component, is a potential candidate for hybrid or electric vehicle applications. Minimizing the BLDC motor size is an important requirement for application. This requirement is usually satisfied by adopting a high performance permanent magnet or improved winding methods. The PM configuration is also a critical point in design. This article presents the effect of the PM configuration on motor performance, especially the maximum torque. Four representative BLDC motor types are analytically investigated under the condition that the volume of the PM and magnetic material is constant. An embedded interior permanent magnet motor has the best torque performance the maximum torque of which is more than 1.5 times larger than that of the surface mounted permanent magnet motor. The performance of back electromotive force, instantaneous torques is also investigated.
Oudyn, Frederik W; Lyons, David J; Pringle, M J
2012-01-01
Many scientific laboratories follow, as standard practice, a relatively short maximum holding time (within 7 days) for the analysis of total suspended solids (TSS) in environmental water samples. In this study we have subsampled from bulk water samples stored at ∼4 °C in the dark, then analysed for TSS at time intervals up to 105 days after collection. The nonsignificant differences in TSS results observed over time demonstrates that storage at ∼4 °C in the dark is an effective method of preserving samples for TSS analysis, far past the 7-day standard practice. Extending the maximum holding time will ease the pressure on sample collectors and laboratory staff who until now have had to determine TSS within an impractically short period.
Regina A. A.
2010-12-01
Full Text Available The study is to model emission from a stack to estimate ground level concentration from a palm oil mill. The case study is a mill located in Kuala Langat, Selangor. Emission source is from boilers stacks. The exercise determines the estimate the ground level concentrations for dust to the surrounding areas through the utilization of modelling software. The surround area is relatively flat, an industrial area surrounded by factories and with palm oil plantations in the outskirts. The model utilized in the study was to gauge the worst-case scenario. Ambient air concentrations were garnered calculate the increase to localized conditions. Keywords: emission, modelling, palm oil mill, particulate, POME
Regina A. A.; I. Mohammad Halim Shah
2010-01-01
The study is to model emission from a stack to estimate ground level concentration from a palm oil mill. The case study is a mill located in Kuala Langat, Selangor. Emission source is from boilers stacks. The exercise determines the estimate the ground level concentrations for dust to the surrounding areas through the utilization of modelling software. The surround area is relatively flat, an industrial area surrounded by factories and with palm oil plantations in the outskirts. The model uti...
Wezel AP van; Posthumus R; Vlaardingen P van; Crommentuijn T; Plassche EJ van de; CSR
1999-01-01
This report presents maximal permissible concentrations (MPCs) and negligible concentrations (NCs) are derived for di-n-butylphthalate (DBP) and di(2-ethylhexyl)phthalate (DEHP). Phthalates are often mentioned as suspected endocrine disrupters. Data with endpoints related to the endocrine or reprodu
Guenter Goerigk
2016-03-01
Full Text Available Anomalous small angle scattering measurements have been applied to diluted solutions of anionic polyacrylates decorated by specifically-interacting Pb2+ cations, revealing partial collapse of the polyacrylate into pearl-like subdomains with a size on the order of a few nanometers. From the pure-resonant scattering contribution of the Pb2+ cations, and from subsequent analysis of the resonant-invariant, the amount of Pb2+ cations condensed onto the polyanions with respect to the total amount of Pb2+ cations in the solvent was estimated. In order to scrutinize systematic limitations in the determination of the chemical concentrations of resonant scattering counterions in the collapsed phase, Monte Carlo simulations have been performed. The simulations are based on structural confinements at variable size in the range of few nanometers, which represent the collapsed subdomains in the polyanions. These confinements were gradually filled to a high degree of the volume fraction with resonant scattering counterions giving access to a resonant-invariant at a variable degree of filling. The simulations revealed in the limit of small structures a significant underestimation of the true degree of filling of the collapsed subdomains when determining chemical concentrations of Pb2+ cations from the resonant invariant.
Kaiadi, Mehrzad; Tunestål, Per; Johansson, Bengt
2010-01-01
High EGR rates combined with turbocharging has been identified as a promising way to increase the maximum load and efficiency of heavy duty spark ignition Natural Gas engines. With stoichiometric conditions a three way catalyst can be used which means that regulated emissions can be kept at very low levels. Most of the heavy duty NG engines are diesel engines which are converted for SI operation. These engine's components are in common with the diesel-engine which put limits on higher exh...
Comparative study on maximum residue limits standards of pesticides in peanuts%花生农药最大残留限量标准比对研究
丁小霞; 李培武; 周海燕; 李娟; 白艺珍
2011-01-01
It is important to protect the health of consumers and standardize the agricultural products in trading market. One essential aspect is to develop and implement a standardized scientific and applicable maximum residue limits( MRL) pesticides. A comparative study of maximum residue limits standards of pesticides in peanuts was carried out among China,Codex Alimentarius Commission (CAC) , Unite States, Japan and European Union. Corre-sponding suggestion was put forward after analyzing the problems in maximum residue limit standards of pesticides in China.%制定和实施科学合理的农药最大残留限量标准是保护消费者健康和规范农产品国际贸易的重要手段.对我国、国际食品法典委员会、花生主产国美国以及我国花生主要出口目的国日本和欧盟的花生农药最大残留限量标准进行了系统比较,分析了我国花生农药最大残留限量标准存在的问题,提出了相应的建议.
Bengtsson-Palme, Johan; Larsson, D G Joakim
2016-01-01
There are concerns that selection pressure from antibiotics in the environment may accelerate the evolution and dissemination of antibiotic-resistant pathogens. Nevertheless, there is currently no regulatory system that takes such risks into account. In part, this is due to limited knowledge of environmental concentrations that might exert selection for resistant bacteria. To experimentally determine minimal selective concentrations in complex microbial ecosystems for all antibiotics would involve considerable effort. In this work, our aim was to estimate upper boundaries for selective concentrations for all common antibiotics, based on the assumption that selective concentrations a priori need to be lower than those completely inhibiting growth. Data on Minimal Inhibitory Concentrations (MICs) were obtained for 111 antibiotics from the public EUCAST database. The 1% lowest observed MICs were identified, and to compensate for limited species coverage, predicted lowest MICs adjusted for the number of tested species were extrapolated through modeling. Predicted No Effect Concentrations (PNECs) for resistance selection were then assessed using an assessment factor of 10 to account for differences between MICs and minimal selective concentrations. The resulting PNECs ranged from 8 ng/L to 64 μg/L. Furthermore, the link between taxonomic similarity between species and lowest MIC was weak. This work provides estimated upper boundaries for selective concentrations (lowest MICs) and PNECs for resistance selection for all common antibiotics. In most cases, PNECs for selection of resistance were below available PNECs for ecotoxicological effects. The generated PNECs can guide implementation of compound-specific emission limits that take into account risks for resistance promotion.
Alemseged Abdissa
2014-06-01
Full Text Available Introduction: Therapeutic drug monitoring (TDM may improve antiretroviral efficacy through adjustment of individual drug administration. This could result in reduced toxicity, prevent drug resistance, and aid management of drug–drug interactions. However, most measurement methods are too costly to be implemented in resource-limited settings. This study evaluated a commercially available immunoassay for measurement of plasma efavirenz. Methods: The immunoassay-based method was applied to measure efavirenz using a readily available Humastar 80 chemistry analyzer. We compared plasma efavirenz concentrations measured by the immunoassay with liquid chromatography tandem mass spectrometry (LC-MS/MS (reference method in 315 plasma samples collected from HIV patients on treatment. Concentrations were categorized as suboptimal4 µg/ml. Agreement between results of the methods was assessed via Bland-Altman plot and κ statistic values. Results: The median Interquartile range (IQR efavirenz concentration was 2.8 (1.9; 4.5 µg/ml measured by the LC–MS/MS method and 2.5 (1.8; 3.9 µg/ml by the immunoassay and the results were well correlated (ρ=0.94. The limits of agreement assessed by Bland–Altman plots were −2.54; 1.70 µg/ml. Although immunoassay underestimated high concentrations, it had good agreement for classification into low, normal or high concentrations (K=0.74. Conclusions: The immunoassay is a feasible alternative to determine efavirenz in areas with limited resources. The assay provides a reasonable approximation of efavirenz concentration in the majority of samples with a tendency to underestimate high concentrations. Agreement between tests evaluated in this study was clinically satisfactory for identification of low, normal and high efavirenz concentrations.
Deoxynivalenol. Derivation of concentration limits in wheat and wheat containing food products
Pieters MN; Fiolet DCM; Baars AJ; CSR
1999-01-01
The mycotoxin deoxynivalenol (DON) produced by fungi of the Fusarium genus may occur in various cereal crops. A provisional TDI of 1.1 ug per kg body weight was derived to calculate concentration limits for the mycotoxin, deoxynivalenol (DON), in wheat and wheat food products. Children (1-4 years
Abdissa, Alemseged; Wiesner, Lubbe; McIlleron, Helen
2014-01-01
to be implemented in resource-limited settings. This study evaluated a commercially available immunoassay for measurement of plasma efavirenz. Methods: The immunoassay-based method was applied to measure efavirenz using a readily available Humastar 80 chemistry analyzer. We compared plasma efavirenz concentrations...
Steentoft, Anni; Simonsen, Kirsten Wiese; Linnet, Kristian
2010-01-01
Until July 2007, the driving under the influence of drugs (DUID) legislation in Denmark was based on impairment, evaluated on the basis of a clinical investigation and toxicological analyses, but in 2007 fixed concentration limits were introduced into the Danish traffic legislation. The objective...
Risk assessment of deoxynivalenol in food: Concentration limits, exposure and effects
Pieters, M.N.; Freijer, J.; Baars, B.J.; Fiolet, D.C.M.; Klaveren, van J.D.; Slob, W.
2002-01-01
The mycotoxin, deoxynivalenol (DON), is produced world-wide by the Fusarium genus in different cereal crops. We derived a provisional TDI of 1.1 mug/kg body weight (bw) and proposed a concentration limit of 129 mug DON/kg wheat based on this TDI and a high wheat consumption of children. In the perio
Deoxynivalenol. Derivation of concentration limits in wheat and wheat containing food products
Pieters MN; Fiolet DCM; Baars AJ; CSR
1999-01-01
The mycotoxin deoxynivalenol (DON) produced by fungi of the Fusarium genus may occur in various cereal crops. A provisional TDI of 1.1 ug per kg body weight was derived to calculate concentration limits for the mycotoxin, deoxynivalenol (DON), in wheat and wheat food products. Children (1-4 years o
Determination and assessment of the concentration limits to be used in SR-Can
Duro, L.; Grive, M.; Cera, E.; Gaona, X.; Domenech, C.; Bruno, J. [Enviros Spain S.L., Barcelona (Spain)
2006-12-15
This report presents the results for solubility limit calculations for the SR-Can assessment. It has been organized into five chapters that constitute the core of the report, supported by several appendices containing additional and supporting information. The updated thermodynamic database used to conduct the solubility calculations has been issued as a separate report. The near field system for which the concentration limits of the radionuclides are assessed and the scenarios selected by SKB to calculate the solubility limits are thoroughly described. Several sources of information have been used to support the calculated solubility limits. In particular results from selected spent fuel dissolution experiments and natural analogue data are discussed to introduce the proper perspective to the results from the thermodynamic calculations. In addition, the main conceptual and numerical uncertainties associated to the assessment of the concentration limits of each element are numerically evaluated and discussed. Equilibrium calculations have been conducted to select the solubility limiting solid phase for each element. Furthermore a sensitivity analysis of parameters of interest for each element is presented and the impact of the uncertainties identified on the solubility of each element quantified. The results are presented in a series of tables containing the calculated solubility for each radionuclide under the reference conditions. Finally concentration limits that are recommended result from the expert judgement built-up around the various sources of information together with the quantification of radionuclide solubility data and their associated uncertainties. The results are compared to previous solubility limits determination performed by SKB in SR 97, as well as the recommended values from other HLNW management organisations.
How low can you go? Assessing minimum concentrations of NSC in carbon limited tree saplings
Hoch, Guenter; Hartmann, Henrik; Schwendener, Andrea
2016-04-01
Tissue concentrations of non-structural carbohydrates (NSC) are frequently used to determine the carbon balance of plants. Over the last years, an increasing number of studies have inferred carbon starvation in trees under environmental stress like drought from low tissue NSC concentrations. However, such inferences are limited by the fact that minimum concentrations of NSC required for survival are not known. So far, it was hypothesized that even under lethal carbon starvation, starch and low molecular sugar concentrations cannot be completely depleted and that minimum NSC concentrations at death vary across tissues and species. Here we present results of an experiment that aimed to determine minimum NSC concentrations in different tissues of saplings of two broad-leaved tree species (Acer pseudoplatanus and Quercus petratea) exposed to lethal carbon starvation via continuous darkening. In addition, we investigated recovery rates of NSC concentrations in saplings that had been darkened for different periods of time and were then re-exposed to light. Both species survived continuous darkening for about 12 weeks (confirmed by testing the ability to re-sprout after darkness). In all investigated tissues, starch concentrations declined close to zero within three to six weeks of darkness. Low molecular sugars also decreased strongly within the first weeks of darkness, but seemed to stabilize at low concentrations of 0.5 to 2 % dry matter (depending on tissue and species) almost until death. NSC concentrations recovered surprisingly fast in saplings that were re-exposed to light. After 3 weeks of continuous darkness, tissue NSC concentrations recovered within 6 weeks to levels of unshaded control saplings in all tissues and in both species. To our knowledge, this study represents the first experimental attempt to quantify minimum tissue NSC concentrations at lethal carbon starvation. Most importantly, our results suggest that carbon-starved tree saplings are able to
Zaccone, Alessio; Gentili, Daniele; Wu, Hua; Morbidelli, Massimo
2010-04-07
The aggregation of interacting brownian particles in sheared concentrated suspensions is an important issue in colloid and soft matter science per se. Also, it serves as a model to understand biochemical reactions occurring in vivo where both crowding and shear play an important role. We present an effective medium approach within the Smoluchowski equation with shear which allows one to calculate the encounter kinetics through a potential barrier under shear at arbitrary colloid concentrations. Experiments on a model colloidal system in simple shear flow support the validity of the model in the concentration range considered. By generalizing Kramers' rate theory to the presence of shear and collective hydrodynamics, our model explains the significant increase in the shear-induced reaction-limited aggregation kinetics upon increasing the colloid concentration.
Beltrán, M C; Romero, T; Althaus, R L; Molina, M P
2013-05-01
The Charm maximum residue limit β-lactam and tetracycline test (Charm MRL BLTET; Charm Sciences Inc., Lawrence, MA) is an immunoreceptor assay utilizing Rapid One-Step Assay lateral flow technology that detects β-lactam or tetracycline drugs in raw commingled cow milk at or below European Union maximum residue levels (EU-MRL). The Charm MRL BLTET test procedure was recently modified (dilution in buffer and longer incubation) by the manufacturers to be used with raw ewe and goat milk. To assess the Charm MRL BLTET test for the detection of β-lactams and tetracyclines in milk of small ruminants, an evaluation study was performed at Instituto de Ciencia y Tecnologia Animal of Universitat Politècnica de València (Spain). The test specificity and detection capability (CCβ) were studied following Commission Decision 2002/657/EC. Specificity results obtained in this study were optimal for individual milk free of antimicrobials from ewes (99.2% for β-lactams and 100% for tetracyclines) and goats (97.9% for β-lactams and 100% for tetracyclines) along the entire lactation period regardless of whether the results were visually or instrumentally interpreted. Moreover, no positive results were obtained when a relatively high concentration of different substances belonging to antimicrobial families other than β-lactams and tetracyclines were present in ewe and goat milk. For both types of milk, the CCβ calculated was lower or equal to EU-MRL for amoxicillin (4 µg/kg), ampicillin (4 µg/kg), benzylpenicillin (≤ 2 µg/kg), dicloxacillin (30 µg/kg), oxacillin (30 µg/kg), cefacetrile (≤ 63 µg/kg), cefalonium (≤ 10 µg/kg), cefapirin (≤ 30 µg/kg), desacetylcefapirin (≤ 30 µg/kg), cefazolin (≤ 25 µg/kg), cefoperazone (≤ 25 µg/kg), cefquinome (20 µg/kg), ceftiofur (≤ 50 µg/kg), desfuroylceftiofur (≤ 50µg/kg), and cephalexin (≤ 50 µg/kg). However, this test could neither detect cloxacillin nor nafcillin at or below EU-MRL (CCβ >30 µg/kg). The
Ostertag, Rebecca; DiManno, Nicole
2016-03-01
Examining foliar nutrient concentrations after fertilization provides an alternative method for detecting nutrient limitation of ecosystems, which is logistically simpler to measure than biomass change. We present a meta-analysis of response ratios of foliar nitrogen and phosphorus (RRN, RRP) after addition of fertilizer of nitrogen (N), phosphorus (P), or the two elements in combination, in relation to climate, ecosystem type, life form, family, and methodological factors. Results support other meta-analyses using biomass, and demonstrate there is strong evidence for nutrient limitation in natural communities. However, because N fertilization experiments greatly outnumber P fertilization trials, it is difficult to discern the absolute importance of N vs. P vs. co-limitation across ecosystems. Despite these caveats, it is striking that results did not follow "conventional wisdom" that temperate ecosystems are N-limited and tropical ones are P-limited. In addition, the use of ratios of N-to-P rather than response ratios also are a useful index of nutrient limitation, but due to large overlap in values, there are unlikely to be universal cutoff values for delimiting N vs. P limitation. Differences in RRN and RRP were most significant across ecosystem types, plant families, life forms, and between competitive environments, but not across climatic variables.
Hermes, Anna L.; Sikes, Elisabeth L.
2016-10-01
The pathway and fate of land-derived suspended particulate organic matter (POM) as it passes through estuaries remains a poorly constrained component of coastal carbon dynamics. The δ13C of bulk POC (particulate organic carbon; δ13C-POC) and n-alkane biomarkers were used to assess the proportion of algal- and land- (vascular plant) derived POM through the Delaware Estuary, on five cruises in 2010-2011. We found that POC was highly correlated with suspended sediment concentrations (SSC). Higher SSC was present in bottom waters, causing bottom waters to have consistently higher concentrations of POC than surface waters, with the bottom waters of the estuarine turbidity maximum (ETM) exhibiting maximum POC concentrations for all seasons and flow regimes. Algal-derived POM seasonally affected the δ13C-POC and n-alkane geochemical signatures of surface waters, whereas bottom waters were dominated by vascular plant-derived POM. δ13C-POC results suggested a gradual loss in vascular plant-derived POM between the riverine and marine endmember stations. In contrast, n-alkane concentrations peaked in bottom waters of the ETM at 2-5 times surface water concentrations. Indices of the relative proportions of n-alkanes and n-alkanes as a proportion of total POC had their levels decrease considerably downstream of the ETM. These biomarker analyses suggest enhanced loss of land-derived material across the ETM and that the ETM acts as a geochemical filter for vascular plant-derived POM in a classic well mixed estuary.
Grujicic, M.; Ramaswami, S.; Snipes, J. S.; Yavari, R.; Yen, C.-F.; Cheeseman, B. A.
2015-01-01
Our recently developed multi-physics computational model for the conventional gas metal arc welding (GMAW) joining process has been upgraded with respect to its predictive capabilities regarding the process optimization for the attainment of maximum ballistic limit within the weld. The original model consists of six modules, each dedicated to handling a specific aspect of the GMAW process, i.e., (a) electro-dynamics of the welding gun; (b) radiation-/convection-controlled heat transfer from the electric arc to the workpiece and mass transfer from the filler metal consumable electrode to the weld; (c) prediction of the temporal evolution and the spatial distribution of thermal and mechanical fields within the weld region during the GMAW joining process; (d) the resulting temporal evolution and spatial distribution of the material microstructure throughout the weld region; (e) spatial distribution of the as-welded material mechanical properties; and (f) spatial distribution of the material ballistic limit. In the present work, the model is upgraded through the introduction of the seventh module in recognition of the fact that identification of the optimum GMAW process parameters relative to the attainment of the maximum ballistic limit within the weld region entails the use of advanced optimization and statistical sensitivity analysis methods and tools. The upgraded GMAW process model is next applied to the case of butt welding of MIL A46100 (a prototypical high-hardness armor-grade martensitic steel) workpieces using filler metal electrodes made of the same material. The predictions of the upgraded GMAW process model pertaining to the spatial distribution of the material microstructure and ballistic limit-controlling mechanical properties within the MIL A46100 butt weld are found to be consistent with general expectations and prior observations.
Chen, Xi Lin; De Santis, Valerio; Umenei, Aghuinyue Esai
2014-07-07
In this study, the maximum received power obtainable through wireless power transfer (WPT) by a small receiver (Rx) coil from a relatively large transmitter (Tx) coil is numerically estimated in the frequency range from 100 kHz to 10 MHz based on human body exposure limits. Analytical calculations were first conducted to determine the worst-case coupling between a homogeneous cylindrical phantom with a radius of 0.65 m and a Tx coil positioned 0.1 m away with the radius ranging from 0.25 to 2.5 m. Subsequently, three high-resolution anatomical models were employed to compute the peak induced field intensities with respect to various Tx coil locations and dimensions. Based on the computational results, scaling factors which correlate the cylindrical phantom and anatomical model results were derived. Next, the optimal operating frequency, at which the highest transmitter source power can be utilized without exceeding the exposure limits, is found to be around 2 MHz. Finally, a formulation is proposed to estimate the maximum obtainable power of WPT in a typical room scenario while adhering to the human body exposure compliance mandates.
Naseeruddin, Shaik; Desai, Suseelendra; Venkateswar Rao, L
2016-02-01
Two grams of delignified substrate at 10% (w/v) level was subjected to biphasic dilute acid hydrolysis using phosphoric acid, hydrochloric acid and sulfuric acid separately at 110 °C for 10 min in phase-I and 121 °C for 15 min in phase-II. Combinations of acid concentrations in two phases were varied for maximum holocellulose hydrolysis with release of fewer inhibitors, to select the suitable acid and its concentration. Among three acids, sulfuric acid in combination of 1 & 2% (v/v) hydrolyzed maximum holocellulose of 25.44±0.44% releasing 0.51±0.02 g/L of phenolics and 0.12±0.002 g/L of furans, respectively. Further, hydrolysis of delignified substrate using selected acid by varying reaction time and temperature hydrolyzed 55.58±1.78% of holocellulose releasing 2.11±0.07 g/L and 1.37±0.03 g/L of phenolics and furans, respectively at conditions of 110 °C for 45 min in phase-I & 121 °C for 60 min in phase-II.
Soil Redox Chemistry Limitation of Selenium Concentration in Carex Species Sedges
Bruce J. Mincher; John Mionczynski; Patrick A. Hnilicka
2007-09-01
The trace element selenium (Se) is required in the production of enzymes that protect mammalian cells from oxidative damage due to the byproducts of aerobic respiration. Its deficiency in livestock results in the nutritional muscular dystrophy called white muscle disease. This especially affects juveniles in the preweaning period. Symptoms have also been reported in wild herbivores on low-Se forage, and their appearance may be episodic, suggesting temporal variations in Se uptake by plants. Here, we report variations in selenium concentrations in Carex spp. sedges used as forage by bighorn sheep (Ovis canadensis) on summer range in the Wyoming, Wind River Mountains, and correlate those variations with soil conditions that affect the bioavailability of selenium. Variations in available Se are explained based upon the known oxidation/reduction chemistry of the element. It is concluded that water-saturated, alpine soils provide conditions suitable for the reduction of Se to the unavailable, elemental form, limiting its concentration in forage plants.
Diffraction-limited Fabry-Perot Cavity in the Near Concentric Regime
Durak, Kadir; Leong, Victor; Straupe, Stanislav; Kurtsiefer, Christian
2014-01-01
Nearly concentric optical cavities can be used to prepare optical fields with a very small mode volume. We implement an anaclastic design of a such a cavity that significantly simplifies mode matching to the fundamental cavity mode. The cavity is shown to have diffraction-limited performance for a mode volume of $\\approx10^4\\lambda^3$. This is in sharp contrast with the behavior of cavities with plano-concave mirrors, where aberrations significantly increase the losses in the fundamental mode. We estimate the related cavity QED parameters and show that the proposed cavity design allows for strong coupling without a need for high finesse or small physical cavity volume.
Wiedner, Hannah; Peyrés, Virginia; Crespo, Teresa; Mejuto, Marcos; García-Toraño, Eduardo; Maringer, Franz Josef
2016-12-27
NORM emits many different gamma energies that have to be analysed by an expert. Alternatively, artificial neural networks (ANNs) can be used. These mathematical software tools can generalize "knowledge" gained from training datasets, applying it to new problems. No expert knowledge of gamma-ray spectrometry is needed by the end-user. In this work an ANN was created that is able to decide from the raw gamma-ray spectrum if the activity concentrations in a sample are above or below the exemption limits.
Berner, U
2002-10-01
The disposal feasibility study currently performed by Nagra includes a succession of quantitative models, aiming at describing the fate of radionuclides potentially escaping from the repository system. In this chain of models the present report provides the so called 'solubility limits' (maximum expected concentrations) for safety relevant radionuclides from SF/HLW wastes, disposed of in a reducing clay (Opalinus Clay, bentonite) environment. Solubility and speciation calculations in bentonite pore waters were performed using the very recently updated Nagra/PSI Chemical Thermodynamic Data Base (TDB) for the majority of the 37 elements addressed as potentially relevant. Particularly for the most relevant actinides, the straightforward applications with this updated TDB yielded results in contradiction to chemical analogy considerations. This was a consequence of incomplete data and called for problem specific TDB extensions, which were evaluated in a separate study. However, a summary of these problem specific extensions is provided in section 4.1. The results presented in this report solely depend on geochemical model calculations. Thus, it is of utmost importance that the underlying data and assumptions are made clear to the reader. In order to ensure traceability, all thermodynamic data not included in the Nagra/PSI TDB are explicitly specified in the report, in order to provide complete documentation for quality assurance and for comprehensibility. In order to clearly distinguish between results derived from data carefully reviewed in the Nagra/PSI TDB and those calculated from 'other' data, the summary of expected maximum concentrations provided in Table 1 includes two columns. The heading CALCULATED provides maximum concentrations based on data fully documented in the updated TDB, whereas maximum concentrations, which include additional problem specific data and/or data from other sources, are given under the heading RECOMMENDED. The
A numerical analysis on forming limits during spiral and concentric single point incremental forming
Gipiela, M. L.; Amauri, V.; Nikhare, C.; Marcondes, P. V. P.
2017-01-01
Sheet metal forming is one of the major manufacturing industries, which are building numerous parts for aerospace, automotive and medical industry. Due to the high demand in vehicle industry and environmental regulations on less fuel consumption on other hand, researchers are innovating new methods to build these parts with energy efficient sheet metal forming process instead of conventionally used punch and die to form the parts to achieve the lightweight parts. One of the most recognized manufacturing process in this category is Single Point Incremental Forming (SPIF). SPIF is the die-less sheet metal forming process in which the single point tool incrementally forces any single point of sheet metal at any process time to plastic deformation zone. In the present work, finite element method (FEM) is applied to analyze the forming limits of high strength low alloy steel formed by single point incremental forming (SPIF) by spiral and concentric tool path. SPIF numerical simulations were model with 24 and 29 mm cup depth, and the results were compare with Nakajima results obtained by experiments and FEM. It was found that the cup formed with Nakajima tool failed at 24 mm while cups formed by SPIF surpassed the limit for both depths with both profiles. It was also notice that the strain achieved in concentric profile are lower than that in spiral profile.
Saha, Jayanta Kumar; Panwar, N R; Singh, M V
2010-09-01
Cadmium and lead are important environmental pollutants with high toxicity to animals and human. Soils, though have considerable metal immobilizing capability, can contaminate food chain via plants grown upon them when their built-up occurs to a large extent. Present experiment was carried out with the objective of quantifying the limits of Pb and Cd loading in soil for the purpose of preventing food chain contamination beyond background concentration levels. Two separate sets of pot experiment were carried out for these two heavy metals with graded levels of application doses of Pb at 0.4-150 mg/kg and Cd at 0.02-20 mg/kg to an acidic light textured alluvial soil. Spinach crop was grown for 50 days on these treated soils after a stabilization period of 2 months. Upper limit of background concentration levels (C(ul)) of these metals were calculated through statistical approach from the heavy metals concentration values in leaves of spinach crop grown in farmers' fields. Lead and Cd concentration limits in soil were calculated by dividing C(ul) with uptake response slope obtained from the pot experiment. Cumulative loading limits (concentration limits in soil minus contents in uncontaminated soil) for the experimental soil were estimated to be 170 kg Pb/ha and 0.8 kg Cd/ha. Based on certain assumptions on application rate and computed cumulative loading limit values, maximum permissible Pb and Cd concentration values in municipal solid waste (MSW) compost were proposed as 170 mg Pb/kg and 0.8 mg Cd/kg, respectively. In view of these limiting values, about 56% and 47% of the MSW compost samples from different cities are found to contain Pb and Cd in the safe range.
Pathogenic Candida species differ in the ability to grow at limiting potassium concentrations.
Hušeková, B; Elicharová, H; Sychrová, H
2016-05-01
A high intracellular concentration of potassium (200-300 mmol/L) is essential for many yeast cell functions, such as the regulation of cell volume and pH, maintenance of membrane potential, and enzyme activation. Thus, cells use high-affinity specific transporters and expend a lot of energy to acquire the necessary amount of potassium from their environment. In Candida genomes, genes encoding 3 types of putative potassium uptake systems were identified: Trk uniporters, Hak symporters, and Acu ATPases. Tests of the tolerance and sensitivity of C. albicans, C. dubliniensis, C. glabrata, C. krusei, C. parapsilosis, and C. tropicalis to various concentrations of potassium showed significant differences among the species, and these differences were partly dependent on external pH. The species most tolerant to potassium-limiting conditions were C. albicans and C. krusei, while C. parapsilosis tolerated the highest KCl concentrations. Also, the morphology of cells changed with the amount of potassium available, with C. krusei and C. tropicalis being the most influenced. Taken together, our results confirm potassium uptake and accumulation as important factors for Candida cell growth and suggest that the sole (and thus probably indispensable) Trk1 potassium uptake system in C. krusei and C. glabrata may serve as a target for the development of new antifungal drugs.
Rama, Aarti; Kesari, Shreekant; Das, Pradeep; Kumar, Vijay
2017-07-24
Extensive application of routine insecticide i.e., dichlorodiphenyltrichloroethane (DDT) to control Phlebotomus argentipes (Diptera: Psychodidae), the proven vector of visceral leishmaniasis in India, had evoked the problem of resistance/tolerance against DDT, eventually nullifying the DDT dependent strategies to control this vector. Because tolerating an hour-long exposure to DDT is not challenging enough for the resistant P. argentipes, estimating susceptibility by exposing sand flies to insecticide for just an hour becomes a trivial and futile task.Therefore, this bioassay study was carried out to investigate the maximum limit of exposure time to which DDT resistant P. argentipes can endure the effect of DDT for their survival. The mortality rate of laboratory-reared DDT resistant strain P. argentipes exposed to DDT was studied at discriminating time intervals of 60 min and it was concluded that highly resistant sand flies could withstand up to 420 min of exposure to this insecticide. Additionally, the lethal time for female P. argentipes was observed to be higher than for males suggesting that they are highly resistant to DDT's toxicity. Our results support the monitoring of tolerance limit with respect to time and hence points towards an urgent need to change the World Health Organization's protocol for susceptibility identification in resistant P. argentipes.
Adams, Michael C; Barbano, David M
2016-01-01
Our objective was to determine the effect of retentate flow channel diameter (4 or 6mm) of nongraded permeability 100-nm pore size ceramic membranes operated in nonuniform transmembrane pressure mode on the limiting retentate protein concentration (LRPC) while microfiltering (MF) skim milk at a temperature of 50°C, a flux of 55 kg · m(-2) · h(-1), and an average cross-flow velocity of 7 m · s(-1). At the above conditions, the retentate true protein concentration was incrementally increased from 7 to 11.5%. When temperature, flux, and average cross-flow velocity were controlled, ceramic membrane retentate flow channel diameter did not affect the LRPC. This indicates that LRPC is not a function of the Reynolds number. Computational fluid dynamics data, which indicated that both membranes had similar radial velocity profiles within their retentate flow channels, supported this finding. Membranes with 6-mm flow channels can be operated at a lower pressure decrease from membrane inlet to membrane outlet (ΔP) or at a higher cross-flow velocity, depending on which is controlled, than membranes with 4-mm flow channels. This implies that 6-mm membranes could achieve a higher LRPC than 4-mm membranes at the same ΔP due to an increase in cross-flow velocity. In theory, the higher LRPC of the 6-mm membranes could facilitate 95% serum protein removal in 2 MF stages with diafiltration between stages if no serum protein were rejected by the membrane. At the same flux, retentate protein concentration, and average cross-flow velocity, 4-mm membranes require 21% more energy to remove a given amount of permeate than 6-mm membranes, despite the lower surface area of the 6-mm membranes. Equations to predict skim milk MF retentate viscosity as a function of protein concentration and temperature are provided. Retentate viscosity, retentate recirculation pump frequency required to maintain a given cross-flow velocity at a given retentate viscosity, and retentate protein
Potvin, Jean; Goldbogen, Jeremy A; Shadwick, Robert E
2012-01-01
Bulk-filter feeding is an energetically efficient strategy for resource acquisition and assimilation, and facilitates the maintenance of extreme body size as exemplified by baleen whales (Mysticeti) and multiple lineages of bony and cartilaginous fishes. Among mysticetes, rorqual whales (Balaenopteridae) exhibit an intermittent ram filter feeding mode, lunge feeding, which requires the abandonment of body-streamlining in favor of a high-drag, mouth-open configuration aimed at engulfing a very large amount of prey-laden water. Particularly while lunge feeding on krill (the most widespread prey preference among rorquals), the effort required during engulfment involve short bouts of high-intensity muscle activity that demand high metabolic output. We used computational modeling together with morphological and kinematic data on humpback (Megaptera noveaangliae), fin (Balaenoptera physalus), blue (Balaenoptera musculus) and minke (Balaenoptera acutorostrata) whales to estimate engulfment power output in comparison with standard metrics of metabolic rate. The simulations reveal that engulfment metabolism increases across the full body size of the larger rorqual species to nearly 50 times the basal metabolic rate of terrestrial mammals of the same body mass. Moreover, they suggest that the metabolism of the largest body sizes runs with significant oxygen deficits during mouth opening, namely, 20% over maximum VO2 at the size of the largest blue whales, thus requiring significant contributions from anaerobic catabolism during a lunge and significant recovery after a lunge. Our analyses show that engulfment metabolism is also significantly lower for smaller adults, typically one-tenth to one-half VO2|max. These results not only point to a physiological limit on maximum body size in this lineage, but also have major implications for the ontogeny of extant rorquals as well as the evolutionary pathways used by ancestral toothed whales to transition from hunting individual prey
Jean Potvin
Full Text Available Bulk-filter feeding is an energetically efficient strategy for resource acquisition and assimilation, and facilitates the maintenance of extreme body size as exemplified by baleen whales (Mysticeti and multiple lineages of bony and cartilaginous fishes. Among mysticetes, rorqual whales (Balaenopteridae exhibit an intermittent ram filter feeding mode, lunge feeding, which requires the abandonment of body-streamlining in favor of a high-drag, mouth-open configuration aimed at engulfing a very large amount of prey-laden water. Particularly while lunge feeding on krill (the most widespread prey preference among rorquals, the effort required during engulfment involve short bouts of high-intensity muscle activity that demand high metabolic output. We used computational modeling together with morphological and kinematic data on humpback (Megaptera noveaangliae, fin (Balaenoptera physalus, blue (Balaenoptera musculus and minke (Balaenoptera acutorostrata whales to estimate engulfment power output in comparison with standard metrics of metabolic rate. The simulations reveal that engulfment metabolism increases across the full body size of the larger rorqual species to nearly 50 times the basal metabolic rate of terrestrial mammals of the same body mass. Moreover, they suggest that the metabolism of the largest body sizes runs with significant oxygen deficits during mouth opening, namely, 20% over maximum VO2 at the size of the largest blue whales, thus requiring significant contributions from anaerobic catabolism during a lunge and significant recovery after a lunge. Our analyses show that engulfment metabolism is also significantly lower for smaller adults, typically one-tenth to one-half VO2|max. These results not only point to a physiological limit on maximum body size in this lineage, but also have major implications for the ontogeny of extant rorquals as well as the evolutionary pathways used by ancestral toothed whales to transition from hunting
Shi, S.Q. [Atomic Energy of Canada Ltd., Pinawa, Manitoba (Canada). Mater. and Mech. Branch; Shek, G.K. [Materials Technology Unit, Ontario Hydro Technologies, 800 Kipling Avenue, Toronto, Ontario (Canada); Puls, M.P. [Atomic Energy of Canada Ltd., Pinawa, Manitoba (Canada). Mater. and Mech. Branch
1995-02-01
An experimental study was carried out to determine the hydrogen concentration limit as a function of temperature at which delayed hydride cracking (DHC) commences in Zr-2.5Nb pressure tube material. For a given hydrogen content of the specimen, two critical temperatures were observed in this work - a DHC initiation temperature, T{sub c}, at which DHC would initiate when approaching the test temperature from above the solvus (or terminal solid solubility) for hydride dissolution (TSSD) and a DHC arrest temperature, T{sub h}, obtained by heating the same specimen from T{sub c} after DHC had started. Both of T{sub c} and T{sub h} are close to, but below, the temperatures defined by TSSD for the specific hydrogen content of the specimen. A theoretical analysis was carried out to quantitatively derive the hydrogen concentration limit and these critical temperatures. The theoretical prediction for T{sub c} depends sensitively on the particular solvus or terminal solid solubility curve for hydride precipitation (TSSP) used, since there is a wide range of values for TSSP depending on the thermal-mechanical history of the material. It is also suggested that T{sub h} is governed by the TSSP for hydride growth, in contrast to T{sub c}, which is governed by the TSSP for hydride nucleation. A model for a previously observed critical temperature (T{sub A}) is also proposed. T{sub A} is a DHC arrest temperature, obtained by approaching the test temperature from a lower temperature. The model suggests that T{sub A} is controlled by the energy difference between TSSD, TSSP and the hydrostatic stress at the crack tip. ((orig.))
Ballast water regulations and the move toward concentration-based numeric discharge limits.
Albert, Ryan J; Lishman, John M; Saxena, Juhi R
2013-03-01
Ballast water from shipping is a principal source for the introduction of nonindigenous species. As a result, numerous government bodies have adopted various ballast water management practices and discharge standards to slow or eliminate the future introduction and dispersal of these nonindigenous species. For researchers studying ballast water issues, understanding the regulatory framework is helpful to define the scope of research needed by policy makers to develop effective regulations. However, for most scientists, this information is difficult to obtain because it is outside the standard scientific literature and often difficult to interpret. This paper provides a brief review of the regulatory framework directed toward scientists studying ballast water and aquatic invasive species issues. We describe different approaches to ballast water management in international, U.S. federal and state, and domestic ballast water regulation. Specifically, we discuss standards established by the International Maritime Organization (IMO), the U.S. Coast Guard and U.S. Environmental Protection Agency, and individual states in the United States including California, New York, and Minnesota. Additionally, outside the United States, countries such as Australia, Canada, and New Zealand have well-established domestic ballast water regulatory regimes. Different approaches to regulation have recently resulted in variations between numeric concentration-based ballast water discharge limits, particularly in the United States, as well as reliance on use of ballast water exchange pending development and adoption of rigorous science-based discharge standards. To date, numeric concentration-based discharge limits have not generally been based upon a thorough application of risk-assessment methodologies. Regulators, making decisions based on the available information and methodologies before them, have consequently established varying standards, or not established standards at all. The
Ovalle, E. M.; Bravo, M. A.; Villalobos, C. U.; Foppiano, A. J.
2013-10-01
Ionospheric variability observed prior to mayor earthquakes has been studied for decades. In particular, in many such studies the identification of ionospheric precursors of large earthquakes has been regarded as a specific goal. This paper analyses the observations of the maximum electron concentration (NmF2) over Concepción (36.8°S; 73.0°W) and of the total electron content (TEC) for an area covering the rupture zone corresponding to the very large Chile earthquake of 27 February 2010. The analyses used here are similar to those published before for many earthquakes in Taiwan, Japan and Russia. Possible NmF2 and TEC precursors are compared with other precursors proposed for the same earthquake using different TEC determinations and satellite observations of electron/ion concentration, energetic particle bursts and electromagnetic emissions. Some possible precursors derived from the various observations are consistent with each other. However, none can be unambiguously associated to the Chilean earthquake.
Barbet-Massin, Claire; Giuliano, Simon; Alletto, Lionel; Daydé, Jean; Berger, Monique
2015-01-01
The need for medicinal and aromatic plants for industrial uses creates an opportunity for farmers to produce alternative crops. Stevia rebaudiana Bertoni, a perennial shrub originating from Paraguay, is of increasing interest as a source of zero-calorie natural sweeteners: the steviol glycosides (SVglys). The aim of this study was to investigate the relevance of nitrogen (N) supply for leaf yield and for SVgly concentrations in leaves, which are the two major components of S. rebaudiana productivity. In this regard, the relationship between leaf N concentration, CO2 assimilation, leaf production and SVgly accumulation was investigated. The experiments were conducted consecutively in growth-chamber (CC: controlled conditions), in greenhouse (SCC: semi-controlled conditions) and in field conditions (FC) on two genotypes. In CC and SCC, three levels of N fertilization were applied. Plants were grown on four locations in the FC experiment. Both N supply (CC and SCC) and location (FC) had a significant effect on N content in leaves. When light was not limiting (SCC and FC) N content in leaves was positively correlated with CO2 assimilation rate and biomass accumulation. Irrespective of the growth conditions, N content in leaves was negatively correlated with SVgly content. However, increased SVgly content was correlated with a decreased ratio of rebaudioside A over stevioside. The evidence that the increased SVgly accumulation compensates for the negative effect on biomass production suggests that adequate SVgly productivity per plant may be achieved with relatively low fertilization.
Barbet-Massin, Claire; Giuliano, Simon; Alletto, Lionel; Daydé, Jean; Berger, Monique
2015-01-01
The need for medicinal and aromatic plants for industrial uses creates an opportunity for farmers to produce alternative crops. Stevia rebaudiana Bertoni, a perennial shrub originating from Paraguay, is of increasing interest as a source of zero-calorie natural sweeteners: the steviol glycosides (SVglys). The aim of this study was to investigate the relevance of nitrogen (N) supply for leaf yield and for SVgly concentrations in leaves, which are the two major components of S. rebaudiana productivity. In this regard, the relationship between leaf N concentration, CO2 assimilation, leaf production and SVgly accumulation was investigated. The experiments were conducted consecutively in growth-chamber (CC: controlled conditions), in greenhouse (SCC: semi-controlled conditions) and in field conditions (FC) on two genotypes. In CC and SCC, three levels of N fertilization were applied. Plants were grown on four locations in the FC experiment. Both N supply (CC and SCC) and location (FC) had a significant effect on N content in leaves. When light was not limiting (SCC and FC) N content in leaves was positively correlated with CO2 assimilation rate and biomass accumulation. Irrespective of the growth conditions, N content in leaves was negatively correlated with SVgly content. However, increased SVgly content was correlated with a decreased ratio of rebaudioside A over stevioside. The evidence that the increased SVgly accumulation compensates for the negative effect on biomass production suggests that adequate SVgly productivity per plant may be achieved with relatively low fertilization. PMID:26192921
Claire Barbet-Massin
Full Text Available The need for medicinal and aromatic plants for industrial uses creates an opportunity for farmers to produce alternative crops. Stevia rebaudiana Bertoni, a perennial shrub originating from Paraguay, is of increasing interest as a source of zero-calorie natural sweeteners: the steviol glycosides (SVglys. The aim of this study was to investigate the relevance of nitrogen (N supply for leaf yield and for SVgly concentrations in leaves, which are the two major components of S. rebaudiana productivity. In this regard, the relationship between leaf N concentration, CO2 assimilation, leaf production and SVgly accumulation was investigated. The experiments were conducted consecutively in growth-chamber (CC: controlled conditions, in greenhouse (SCC: semi-controlled conditions and in field conditions (FC on two genotypes. In CC and SCC, three levels of N fertilization were applied. Plants were grown on four locations in the FC experiment. Both N supply (CC and SCC and location (FC had a significant effect on N content in leaves. When light was not limiting (SCC and FC N content in leaves was positively correlated with CO2 assimilation rate and biomass accumulation. Irrespective of the growth conditions, N content in leaves was negatively correlated with SVgly content. However, increased SVgly content was correlated with a decreased ratio of rebaudioside A over stevioside. The evidence that the increased SVgly accumulation compensates for the negative effect on biomass production suggests that adequate SVgly productivity per plant may be achieved with relatively low fertilization.
Gang Li
2012-01-01
Full Text Available Vertical patterns of early summer chlorophyll a (Chl a concentration from the Indian Ocean are presented, as well as the variations of depth and size-fractioned Chl a in the deep chlorophyll maximum (DCM. A total of 38 stations were investigated from 12 April to 5 May 2011, with 8 discrete-depth samples (7 fixed and 1 variable at real DCM measured at each station. Depth-integrated Chl a concentration (∑Chl a varied from 11.5 to 26.8 mg m−2, whereas Chl a content at DCM ranged from 0.17 to 0.57 μg L−1 with picophytoplankton (<3 μm accounting for 82% to 93%. The DCM depth varied from 55.6 to 91 m and shoaled latitudinally to northward. Moreover, our results indicated that the ∑Chl a could be underestimated by up to 9.3% with a routine sampling protocol of collecting samples only at 7 fixed depths as the real DCM was missed. The underestimation was negatively correlated to the DCM depth when it varied from 55.6 to 71.3 m (r=−0.63, P<0.05 but positively correlated when it ranged from 75.8 to 91 m (r=0.68, P<0.01. This indicates that in the Indian Ocean the greater the departure of the DCM from 75 m depth, the greater the underestimation of integrated Chl a concentration that could occur if the real DCM is missed.
Dodrill, Michael J.; Yackulic, Charles B.; Kennedy, Theodore A.; Haye, John W
2016-01-01
The cold and clear water conditions present below many large dams create ideal conditions for the development of economically important salmonid fisheries. Many of these tailwater fisheries have experienced declines in the abundance and condition of large trout species, yet the causes of these declines remain uncertain. Here, we develop, assess, and apply a drift-foraging bioenergetics model to identify the factors limiting rainbow trout (Oncorhynchus mykiss) growth in a large tailwater. We explored the relative importance of temperature, prey quantity, and prey size by constructing scenarios where these variables, both singly and in combination, were altered. Predicted growth matched empirical mass-at-age estimates, particularly for younger ages, demonstrating that the model accurately describes how current temperature and prey conditions interact to determine rainbow trout growth. Modeling scenarios that artificially inflated prey size and abundance demonstrate that rainbow trout growth is limited by the scarcity of large prey items and overall prey availability. For example, shifting 10% of the prey biomass to the 13 mm (large) length class, without increasing overall prey biomass, increased lifetime maximum mass of rainbow trout by 88%. Additionally, warmer temperatures resulted in lower predicted growth at current and lower levels of prey availability; however, growth was similar across all temperatures at higher levels of prey availability. Climate change will likely alter flow and temperature regimes in large rivers with corresponding changes to invertebrate prey resources used by fish. Broader application of drift-foraging bioenergetics models to build a mechanistic understanding of how changes to habitat conditions and prey resources affect growth of salmonids will benefit management of tailwater fisheries.
Brigham-Grette, J.; Gualtieri, L.M.; Glushkova, O.Y.; Hamilton, T.D.; Mostoller, D.; Kotov, A.
2003-01-01
The Pekulney Mountains and adjacent Tanyurer River valley are key regions for examining the nature of glaciation across much of northeast Russia. Twelve new cosmogenic isotope ages and 14 new radiocarbon ages in concert with morphometric analyses and terrace stratigraphy constrain the timing of glaciation in this region of central Chukotka. The Sartan Glaciation (Last Glacial Maximum) was limited in extent in the Pekulney Mountains and dates to ???20,000 yr ago. Cosmogenic isotope ages > 30,000 yr as well as non-finite radiocarbon ages imply an estimated age no younger than the Zyryan Glaciation (early Wisconsinan) for large sets of moraines found in the central Tanyurer Valley. Slope angles on these loess-mantled ridges are less than a few degrees and crest widths are an order of magnitude greater than those found on the younger Sartan moraines. The most extensive moraines in the lower Tanyurer Valley are most subdued implying an even older, probable middle Pleistocene age. This research provides direct field evidence against Grosswald's Beringian ice-sheet hypothesis. ?? 2003 Elsevier Science (USA). All rights reserved.
Cohen, S.A.; Hosea, J.C.; Timberlake, J.R.
1984-10-19
A limiter with a specially contoured front face is provided. The front face of the limiter (the plasma-side face) is flat with a central indentation. In addition, the limiter shape is cylindrically symmetric so that the limiter can be rotated for greater heat distribution. This limiter shape accommodates the various power scrape-off distances lambda p, which depend on the parallel velocity, V/sub parallel/, of the impacting particles.
Updating Environmental Media Concentration Limits and Uncertainty factors in the ERICA Tool
Brown, J.E.; Hosseini, A. [Norwegian Radiation Protection Authority, P.O. Box 55, N-1332 Oesteraas (Norway); Alfonso, B.; Avila, R. [Facilia AB, S-167 51 Bromma (Sweden); Beresford, N.A. [Centre for Ecology and Hydrology, CEH-Lancaster, Lancaster Environment Centre, Library Avenue, Bailrigg, Lancaster LA 1 4AP (United Kingdom); Copplestone, D. [Dept. Biological and Environmental Sciences, University of Stirling, Stirling, FK9 4LA (United Kingdom)
2014-07-01
Tiered approaches have become a standard means of structuring information in the process of conducting environmental risk assessments. For cases involving the assessment of impacts on wildlife from ionising radiation, the ERICA integrated approach and its supporting software (The ERICA Tool) provides such a structure, splitting the system into two generic screening tiers and a third site-specific tier. The first Tier is very simple, based around Environmental Media Concentration Limits, EMCLs, and requires minimal input from the assessor. The second Tier, although still a screening tier, calculates dose rates and requires more detailed input from the assessor allowing for scrutiny and editing of default parameters in the process. A key element of Tier 2 involves the application of Uncertainty Factors, UFs. Such factors reflect our knowledge concerning probability distribution functions and provide a way of incorporating conservatism into the assessment by considering high percentile values in underlying parameters. Following its launch in 2007, there have been significant developments regarding certain components of the ERICA integrated approach. Most notably, an extended international collation of concentration ratio data has precipitated the need to update parameter values in the Tools databases. In addition, more considered guidance has been developed with regards to filling knowledge gaps in the absence of transfer data. Furthermore, the efficacy of the methods used in assigning probability distribution functions has been questioned leading to an acknowledgement from the developers that the methods were not described in enough detail nor were the justifications for applying the selected approach provided in a convincing way. This has implications for the EMCL values which are derived probabilistically using parameters including concentration ratios. Furthermore, there are implications for UF derivation that relies upon a robust consideration of underlying
Concentration in vanishing pressure limit of solutions to the modified Chaplygin gas equations
Yang, Hanchun; Wang, Jinhuan
2016-11-01
Two kinds of occurrence mechanism on the phenomenon of concentration and the formation of delta shock wave in vanishing pressure limit of solutions to the modified Chaplygin gas equations are analyzed and identified. The Riemann problem of the modified Chaplygin gas equations is first solved. Then it is shown that, as the pressure vanishes, any two-shock Riemann solution tends to a delta-shock solution to the transport equations, and the intermediate density between the two shocks tends to a weighted δ-measure which forms a delta shock wave; any two-rarefaction-wave Riemann solution tends to a two-contact-discontinuity solution to the transport equations, and the nonvacuum intermediate state in between tends to a vacuum state. It is also shown that, as the pressure approaches the generalized Chaplygin gas pressure, any two-shock Riemann solution tends to a delta-shock solution to the generalized Chaplygin gas equations. Some numerical results are presented to show the formation process of delta shock waves and vacuum states.
Kinkhabwala, Ali
2013-01-01
The most fundamental problem in statistics is the inference of an unknown probability distribution from a finite number of samples. For a specific observed data set, answers to the following questions would be desirable: (1) Estimation: Which candidate distribution provides the best fit to the observed data?, (2) Goodness-of-fit: How concordant is this distribution with the observed data?, and (3) Uncertainty: How concordant are other candidate distributions with the observed data? A simple unified approach for univariate data that addresses these traditionally distinct statistical notions is presented called "maximum fidelity". Maximum fidelity is a strict frequentist approach that is fundamentally based on model concordance with the observed data. The fidelity statistic is a general information measure based on the coordinate-independent cumulative distribution and critical yet previously neglected symmetry considerations. An approximation for the null distribution of the fidelity allows its direct conversi...
Visciano, Pierina; Scortichini, Giampiero; Suzzi, Giovanna; Diletti, Gianfranco; Schirone, Maria; Martino, Giuseppe
2015-09-01
Concentrations of pollutants with regulatory limits were determined in specimens of Chamelea gallina, a species of clam collected along the Abruzzi coastal region of the central Adriatic Sea. Nine sampling sites were selected to evaluate the distribution of contaminants in the environment and the health risk for consumers. The concentrations of all the examined compounds were lower than the maximums set by European legislation. Polycyclic aromatic hydrocarbons and total mercury were below the detection limit (0.18 μg/kg for benzo[a]anthracene, 0.30 μg/kg for chrysene, 0.12 μg/kg for benzo[b]fluoranthene, 0.08 μg/kg for benzo[a]pyrene, and 0.0050 mg/kg for total mercury) in all the analyzed samples. Mean concentrations of lead and cadmium were 0.104 and 0.110 mg/kg, respectively. Of the non-dioxin-like polychlorinated biphenyls, PCB-153, PCB-180, and PCB-138 were the most abundant at all sampling sites (1a to 9a) at 0.25 mi (ca. 0.4 km) and at some sampling sites (1b, 2b, 3b, 5b and 7b) at 0.35 mi (ca. 0.56 km). Principal component analysis revealed that the concentrations of dioxin-like polychlorinated biphenyls were similar at the majority of sampling sites, and O8CDD and 2,3,7,8-T4CDF were the predominant dioxin congeners.
Rodrigues, Elsa Teresa; Pardal, Miguel Ângelo; Gante, Cristiano; Loureiro, João; Lopes, Isabel
2017-02-01
The main goal of the present study was to determine and validate an aquatic Maximum Acceptable Concentration-Environmental Quality Standard (MAC-EQS) value for the agricultural fungicide azoxystrobin (AZX). Assessment factors were applied to short-term toxicity data using the lowest EC50 and after the Species Sensitivity Distribution (SSD) method. Both ways of EQS generation were applied to a freshwater toxicity dataset for AZX based on available data, and to marine toxicity datasets for AZX and Ortiva(®) (a commercial formulation of AZX) obtained by the present study. A high interspecific variability in AZX sensitivity was observed in all datasets, being the copepoda Eudiaptomus graciloides (LC50,48h = 38 μg L(-1)) and the gastropod Gibbula umbilicalis (LC50,96h = 13 μg L(-1)) the most sensitive freshwater and marine species, respectively. MAC-EQS values derived using the lowest EC50 (≤0.38 μg L(-1)) were more protective than those derived using the SSD method (≤3.2 μg L(-1)). After comparing the MAC-EQS values estimated in the present study to the smallest AA-EQS available, which protect against the occurrence of prolonged exposure of AZX, the MAC-EQS values derived using the lowest EC50 were considered overprotective and a MAC-EQS of 1.8 μg L(-1) was validated and recommended for AZX for the water column. This value was derived from marine toxicity data, which highlights the importance of testing marine organisms. Moreover, Ortiva affects the most sensitive marine species to a greater extent than AZX, and marine species are more sensitive than freshwater species to AZX. A risk characterization ratio higher than one allowed to conclude that AZX might pose a high risk to the aquatic environment. Also, in a wider conclusion, before new pesticides are approved, we suggest to improve the Tier 1 prospective Ecological Risk Assessment by increasing the number of short-term data, and apply the SSD approach, in order to ensure the safety of
Chloride concentration and pHs influence on the Atterberg limits of Søvind Marl
Grønbech, Gitte; Nielsen, Benjaminn Nordahl; Ibsen, Lars Bo
The Atterberg limits play a great role in the assessment and classification of soils. The pore water and it components have a great influence on the behavior of the clay. When finding the Atterberg limits, de-ionised water is used to homogenize the clay. De-ionised water badly resembles the pore ...
Reif, R H; Andrews, D W
1995-06-01
Monitoring workers and work areas at the Department of Energy Uranium Mill Tailings Remedial Action Project sites is complex because all radionuclides in the 238U and 235U decay chains may be present in an airborne uranium mill tailings matrix. Previous monitoring practices involved isotopic analysis of the air filter to determine the activity of each radionuclide of concern and comparing the results to the specified derived air concentration. The annual limit on intake and derived air concentration values have been derived here for the uranium mill tailings matrix to simplify the procedure for evaluation of air monitoring results and assessment of the need for individual monitoring. Implementation of the derived air concentration for uranium mill tailings involves analyzing air samples for long-lived gross alpha activity and comparing the activity concentration to the derived air concentration. Health physics decisions regarding assessment of airborne concentrations is more cost-effective because isotopic analysis of air samples is not necessary.
Bates, Alice P; Kennedy, Rodney A
2016-01-01
In this work, we develop an analytical formulation for the Slepian spatial-spectral concentration problem on the sphere for a limited colatitude-longitude spatial region on the sphere, defined as the Cartesian product of a range of positive colatitudes and longitudes. The solution of the Slepian problem is a set of functions which are optimally concentrated and orthogonal within a spatial or spectral region. These properties make them useful for applications where measurements are taken within a spatially limited region of the sphere and/or a signal is only to be analyzed within a region of the sphere. To support localized spectral/spatial analysis, and estimation and sparse representation of localized data in these applications, we exploit the expansion of spherical harmonics in the complex exponential basis to develop an analytical formulation for the Slepian concentration problem for a limited colatitude-longitude spatial region. We also extend the analytical formulation for spatial regions which are compr...
NONE
2017-08-01
The MAK and BAT values list 2017 includes the maximum permissible concentrations at the place of work and biological tolerance values for working materials. The following working materials are covered: carcinogenic working materials, sensitizing materials and aerosols. The report discusses the restriction of exposure peaks, skin resorption, MAK (maximum working place concentration) values during pregnancy, germ cell mutagens and specific working materials. Importance and application of BAT (biological working material tolerance) values, list of materials, carcinogens, biological guide values and reference values are also included.
Hu, Pengxiang; Jiang, Zhaoxia; Liu, Qingsong; Heslop, David; Roberts, Andrew P.; Torrent, José; Barrón, Vidal
2016-06-01
Hematite and goethite in soils are often aluminum (Al) substituted, which can dramatically change their reflectance and magnetic properties and bias abundance estimates using diffuse reflectance spectroscopy (DRS) and magnetic techniques. In this study, synthetic Al-substituted hematites and goethites and two Chinese loess/paleosol sequences were investigated to test the feasibility and limitations of estimating Al-hematite and Al-goethite concentration. When Al substitution is limited (Al/(Al + Fe) molar ratio ~8%) reduces DRS band intensity, which leads to biased estimates of mineral concentration. Al substitution and grain size exert a control on coercivity distributions of hematite and goethite and, thus, affect the hard isothermal remanent magnetization. By integrating DRS and magnetic methods, we suggest a way to constrain hematite and goethite Al substitution in natural loess. Results indicate that hematite and goethite in Chinese loess have Al contents lower than ~8% and, thus, that DRS can be used to trace hematite and goethite concentration variations.
Phylogenetic Mixtures: Concentration of Measure in the Large-Tree Limit
Mossel, Elchanan
2011-01-01
The reconstruction of phylogenies from DNA or protein sequences is a major task of computational evolutionary biology. Common phenomena, notably variations in mutation rates across genomes and incongruences between gene lineage histories, often make it necessary to model molecular data as originating from a mixtureof phylogenies. Such mixed models play an increasingly important role in practice. Using concentration of measure techniques, we show that mixtures of large trees are typically identifiable. We also derive sequence-length requirements for high-probability reconstruction.
Li, Liwei; Bryant, Doug; van Heugten, Tony; Bos, Philip J
2013-03-20
A comprehensive analysis of fundamental factors and their effects on the performance of liquid crystal (LC)-based lenses is given. The analysis adopts numerical LC director and electric field simulation, as well as scalar diffraction theory for calculating the lens performance considering different variable factors. A high-efficiency LC lens with concentric electrode rings is fabricated for verifying and enriching the analysis. The measurement results are in close agreement with the analysis, and a summary of key factors is given with their quantitative contributions to the efficiency.
Andresen, Juan Carlos; Katzgraber, Helmut G.; Oganesyan, Vadim; Schechter, Moshe
2014-10-01
The nature of ordering in dilute dipolar interacting systems dates back to the work of Debye and is one of the most basic, oldest and as-of-yet unsettled problems in magnetism. While spin-glass order is readily observed in several RKKY-interacting systems, dipolar spin glasses are the subject of controversy and ongoing scrutiny, e.g., in LiHoxY1 -xF4, a rare-earth randomly diluted uniaxial (Ising) dipolar system. In particular, it is unclear if the spin-glass phase in these paradigmatic materials persists in the limit of zero concentration or not. We study an effective model of LiHoxY1 -xF4 using large-scale Monte Carlo simulations that combine parallel tempering with a special cluster algorithm tailored to overcome the numerical difficulties that occur at extreme dilutions. We find a paramagnetic to spin-glass phase transition for all Ho+ ion concentrations down to the smallest concentration numerically accessible, 0.1%, and including Ho+ ion concentrations that coincide with those studied experimentally up to 16.7%. Our results suggest that randomly diluted dipolar Ising systems have a spin-glass phase in the limit of vanishing dipole concentration, with a critical temperature vanishing linearly with concentration. The agreement of our results with mean-field theory testifies to the irrelevance of fluctuations in interactions strengths, albeit being strong at small concentrations, to the nature of the low-temperature phase and the functional form of the critical temperature of dilute anisotropic dipolar systems. Deviations from linearity in experimental results at the lowest concentrations are discussed.
Stokdyk, Joel P.; Firnstahl, Aaron; Spencer, Susan K.; Burch, Tucker R; Borchardt, Mark A.
2016-01-01
The limit of detection (LOD) for qPCR-based analyses is not consistently defined or determined in studies on waterborne pathogens. Moreover, the LODs reported often reflect the qPCR assay alone rather than the entire sample process. Our objective was to develop an approach to determine the 95% LOD (lowest concentration at which 95% of positive samples are detected) for the entire process of waterborne pathogen detection. We began by spiking the lowest concentration that was consistently positive at the qPCR step (based on its standard curve) into each procedural step working backwards (i.e., extraction, secondary concentration, primary concentration), which established a concentration that was detectable following losses of the pathogen from processing. Using the fraction of positive replicates (n = 10) at this concentration, we selected and analyzed a second, and then third, concentration. If the fraction of positive replicates equaled 1 or 0 for two concentrations, we selected another. We calculated the LOD using probit analysis. To demonstrate our approach we determined the 95% LOD for Salmonella enterica serovar Typhimurium, adenovirus 41, and vaccine-derived poliovirus Sabin 3, which were 11, 12, and 6 genomic copies (gc) per reaction (rxn), respectively (equivalent to 1.3, 1.5, and 4.0 gc L−1 assuming the 1500 L tap-water sample volume prescribed in EPA Method 1615). This approach limited the number of analyses required and was amenable to testing multiple genetic targets simultaneously (i.e., spiking a single sample with multiple microorganisms). An LOD determined this way can facilitate study design, guide the number of required technical replicates, aid method evaluation, and inform data interpretation.
Dornelles, M F; Oliveira, G T
2016-01-01
This work sought to ascertain survival and possible changes in levels of glycogen, triglycerides, total lipids, cholesterol, protein, and lipid peroxidation in gills, liver, and muscle of bullfrog tadpoles (Lithobates catesbeianus) exposed to low concentrations of atrazine (2.5 μg L(-1)), glyphosate (18 μg L(-1)), and quinclorac (0.025 μg L(-1)) at laboratorial conditions. Tadpoles showed a reduction of glycogen and triglyceride in all organs and an increase in lipid peroxidation (LPO) compared with control animals. Total lipid in gills and muscle increased in exposure to atrazine, and gills alone in exposure to glyphosate, but decreased in gills, liver, and muscle after quinclorac. Cholesterol increased in gills and liver after atrazine, in gills and muscle after glyphosate, and decreased in liver after quinclorac. Total protein in gills decreased after exposure to all herbicides, increased in muscle after atrazine, and in liver and muscle after quinclorac. These findings show that at concentrations of these herbicides tested can lead to an increase in energy expenditure to maintain homeostasis and survival of these animals despite the increase in lipid peroxidation levels in all organs analyzed. Responses observed can be one of the factors responsible for the decline in the number of amphibians around the world.
Diano, Audrey; Peeters, J.; Dynesen, Jens Østergaard
2009-01-01
In industrial production of enzymes using the filamentous fungus Aspergilhis niger supply of sufficient oxygen is often a limitation, resulting in the formation of by-products such as polyols. In order to identify the mechanisms behind formation of the different by-products we studied the effect...... of low oxygen availability, at different carbon source concentrations and at different specific growth rates, on the metabolism of A. niger, using continuous cultures. The results show that there is an increase in the production of tricarboxylic acid (TCA) cycle intermediates at low oxygen concentrations...
Heemstra de Groot, S.M.; Herrmann, O.E.
1990-01-01
An algorithm based on an alternative scheduling approach for iterative acyclic and cyclid DFGs (data-flow graphs) with limited resources that exploits inter- and intra-iteration parallelism is presented. The method is based on guiding the scheduling algorithm with the information supplied by a
Akt1 is the principal Akt isoform regulating apoptosis in limiting cytokine concentrations.
Green, B D; Jabbour, A M; Sandow, J J; Riffkin, C D; Masouras, D; Daunt, C P; Salmanidis, M; Brumatti, G; Hemmings, B A; Guthridge, M A; Pearson, R B; Ekert, P G
2013-10-01
The activation of the Akt signalling in response to cytokine receptor signalling promotes protein synthesis, cellular growth and proliferation. To determine the role of Akt in interleukin-3 (IL-3) signalling, we generated IL-3-dependent myeloid cell lines from mice lacking Akt1, Akt2 or Akt3. Akt1 deletion resulted in accelerated apoptosis at low concentrations of IL-3. Expression of constitutively active Akt1 was sufficient to delay apoptosis in response to IL-3 withdrawal, but not sufficient to induce proliferation in the absence of IL-3. Akt1 prolonged survival of Bim- or Bad-deficient cells, but not cells lacking Puma, indicating that Akt1-dependent repression of apoptosis was in part dependent on Puma and independent of Bim or Bad. Our data show that a key role of Akt1 during IL-3 signalling is to repress p53-dependent apoptosis pathways, including transcriptional upregulation of Puma. Moreover, our data indicate that regulation of BH3-only proteins by Akt is dispensable for Akt-dependent cell survival.
Grive, Mireia; Domenech, Cristina; Montoya, Vanessa; Garcia, David; Duro, Lara
2010-09-15
This document complements and updates the report TR-06-32, Determination and assessment of the concentration limits to be used in SR-Can, in which the solubility limits of different radionuclides in the near field system and under the different scenarios selected by SKB were assessed. Since 2006, several important changes in different fields affecting solubility assessment calculations have been reported. These changes basically concern some of the thermodynamic data used in the calculations and the groundwater compositions for scenarios of interest defined by SKB. In this document we update the thermodynamic data corresponding to Ni, Zr, Th and U and we describe the thermodynamic database selected for Pb. This document also reports the update of the assessment of the concentration limits to be used in SR-Can, which has been done considering the recent thermodynamic database updates and the new groundwater compositions of interest supplied by SKB. Finally, we also present the Simple Functions spreadsheet tool, born from the need of having a confident and easy-to-handle tool to calculate solubility limits of some radionuclides under determined conditions in an agile and relatively fast manner
Kalinchak, V. V.; Chernenko, A. S.; Kalugin, V. V.
2015-05-01
For the case of the cold, relative to a gas mixture, walls of an apparatus and radiation heat transfer, an investigation is made of the dependence of the limiting minimum gas mixture temperatures above which catalytic self-ignition and firing of a low-concentration combustible gas on a catalyst particle are possible. The proposed method is based on obtaining the desired dependences in a parametric form. An analysis of the degeneration of critical temperatures and of ignition and extinction diameters is carried out.
T. A. Przylibski
2011-04-01
Full Text Available The authors investigated short-time changes in 222Rn activity concentration occurring yearly in two underground tourist facilities with limited air exchange with the atmosphere. One of them is Niedźwiedzia (Bear Cave in Kletno, Poland – a natural space equipped with locks ensuring isolation from the atmosphere. The other site is Fluorite Adit in Kletno, a section of a disused uranium mine. This adit is equipped with a mechanical ventilation system, operated periodically outside the opening times (at night. Both sites are situated within the same metamorphic rock complex, at similar altitudes, about 2 km apart. The measurements conducted revealed spring and autumn occurrence of convective air movements. In Bear Cave, this process causes a reduction in 222Rn activity concentration in the daytime, i.e. when tourists, guides and other staff are present in the cave. From the point of view of radiation protection, this is the best situation. For the rest of the year, daily concentrations of 222Rn activity in the cave are very stable. In Fluorite Adit, on the other hand, significant variations in daily 222Rn activity concentrations are recorded almost all year round. These changes are determined by the periods of activity and inactivity of mechanical ventilation. Unfortunately this is inactive in the daytime, which results in the highest values of 222Rn activity concentration at the times when tourists and staff are present in the adit. Slightly lower concentrations of radon in Fluorite Adit are recorded in the winter season, when convective air movements carry a substantial amount of radon out into the atmosphere. The incorrect usage of mechanical ventilation in Fluorite Adit results in the most unfavourable conditions in terms of radiation protection. The staff working in that facility are exposed practically throughout the year to the highest 222Rn activity concentrations, both at work (in the adit and at home (outside their working hours
Ellepola, Arjuna N B; Joseph, Bobby K; Khan, Z U
2013-01-01
Candidal adhesion has been implicated as the initial step in the pathogenesis of oral candidiasis and cell surface hydrophobicity (CSH) has been implicated in adhesion to mucosal surfaces. Candida dubliniensis is an opportunistic pathogen associated with recurrent oral candidiasis. Chlorhexidine gluconate is by far the commonest antiseptic mouth wash prescribed in dentistry. At dosage intervals the intraoral concentration of this antiseptic fluctuates considerably and reaches sub-therapeutic levels due to the dynamics of the oral cavity. Hence, the organisms undergo only a limited exposure to the antiseptic during treatment. The impact of this antiseptic following such exposure on CSH of C. dubliniensis isolates has not been investigated. Hence, the main objective of this study was to investigate the effect of brief exposure to sub-therapeutic concentrations of chlorhexidine gluconate on the CSH of C. dubliniensis isolates. Twelve oral isolates of C. dubliniensis were briefly exposed to three sub-therapeutic concentrations of 0.005%, 0.0025% and 0.00125% chlorhexidine gluconate for 30 min. Following subsequent removal of the drug, the CSH of the isolates was determined by a biphasic aqueous-hydrocarbon assay. Compared with the controls, exposure to 0.005% and 0.0025% chlorhexidine gluconate suppressed the relative CSH of the total sample tested by 44.49% (P 0.05), four isolates of the group were significantly affected. These findings imply that exposure to sub-therapeutic concentrations of chlorhexidine gluconate may suppress CSH of C. dublinienis isolates, thereby reducing its pathogenicity and highlights further the pharmacodynamics of chlorhexidine gluconate.
Silvia Alvarez-Clare
Full Text Available Understanding nutrient limitation of net primary productivity (NPP is critical to predict how plant communities will respond to environmental change. Foliar nutrients, especially nitrogen and phosphorus concentrations ([N] and [P] and their ratio, have been used widely as indicators of plant nutritional status and have been linked directly to nutrient limitation of NPP. In tropical systems, however, a high number of confounding factors can limit the ability to predict nutrient limitation--as defined mechanistically by NPP responses to fertilization--based on the stoichiometric signal of the plant community. We used a long-term full factorial N and P fertilization experiment in a lowland tropical wet forest in Costa Rica to explore how tissue (foliar, litter and root [N] and [P] changed with fertilization, how different tree size classes and taxa influenced the community response, and how tissue nutrients related to NPP. Consistent with NPP responses to fertilization, there were no changes in community-wide foliar [N] and [P], two years after fertilization. Nevertheless, litterfall [N] increased with N additions and root [P] increased with P additions. The most common tree species (Pentaclethra macroloba had 9% higher mean foliar [N] with NP additions and the most common palm species (Socratea exohrriza had 15% and 19% higher mean foliar [P] with P and NP additions, respectively. Moreover, N:P ratios were not indicative of NPP responses to fertilization, either at the community or at the taxa level. Our study suggests that in these diverse tropical forests, tissue [N] and [P] are driven by the interaction of multiple factors and are not always indicative of the nutritional status of the plant community.
Alvarez-Clare, Silvia; Mack, Michelle C
2015-01-01
Understanding nutrient limitation of net primary productivity (NPP) is critical to predict how plant communities will respond to environmental change. Foliar nutrients, especially nitrogen and phosphorus concentrations ([N] and [P]) and their ratio, have been used widely as indicators of plant nutritional status and have been linked directly to nutrient limitation of NPP. In tropical systems, however, a high number of confounding factors can limit the ability to predict nutrient limitation--as defined mechanistically by NPP responses to fertilization--based on the stoichiometric signal of the plant community. We used a long-term full factorial N and P fertilization experiment in a lowland tropical wet forest in Costa Rica to explore how tissue (foliar, litter and root) [N] and [P] changed with fertilization, how different tree size classes and taxa influenced the community response, and how tissue nutrients related to NPP. Consistent with NPP responses to fertilization, there were no changes in community-wide foliar [N] and [P], two years after fertilization. Nevertheless, litterfall [N] increased with N additions and root [P] increased with P additions. The most common tree species (Pentaclethra macroloba) had 9% higher mean foliar [N] with NP additions and the most common palm species (Socratea exohrriza) had 15% and 19% higher mean foliar [P] with P and NP additions, respectively. Moreover, N:P ratios were not indicative of NPP responses to fertilization, either at the community or at the taxa level. Our study suggests that in these diverse tropical forests, tissue [N] and [P] are driven by the interaction of multiple factors and are not always indicative of the nutritional status of the plant community.
陈富坚; 黄世斌; 包惠明
2011-01-01
To solve the problems in the current deterministic method for determining a maximum speed limit for expressway operation against disastrous events, a reliability method was presented. The dynamic analysis was made for vehicle traveling at a horizontal curve of expressway, and respective maximum allowable speeds were deduced for vehicle in horizontal circular motion without sliding and that in emergency stopping without hitting an obstacle in the visual range. Based on Reliability engineering, the reliability of a maximum speed limit was defined. With safety of horizontal circular motion and emergency stopping as constraints, the performance function of the maximum speed limit was established and the model for calculation of its reliability and reliable indicator were deduced. For solution of the reliability model, Monte Carlo method was recommended due to multi-parameter high complexity of the non-linear performance function. With a self-developed program, a case study was conducted to illustrate the reliability analysis of the maximum speed limit for expressway safety management under a detrimental event. The reliability method for determining a maximum speed limit of expressway operation is helpful for improving traffic safety.%针对灾变事件下高速公路安全管理中采用定值型限速标准存在的问题,对基于可靠性的限速标准进行了探讨.通过对高速公路平曲线路段车辆行驶的动力学分析,推导了车辆作圆周运动而不发生横向滑移的最大允许车速,以及司机在弯道内发现障碍物而紧急安全停车的最大允许速度.以可靠性工程理论为依据,对高速公路限速标准的可靠度进行了定义,并以圆周运动安全和紧急刹车安全为约束条件建立了高速公路限速标准的功能函数,推导了相应的可靠性计算模型.针对限速标准功能函数的多参数复杂非线性特征,提出采用Monte Carlo法对限速标准可靠性计算模型进行求解.以所
2010-07-01
... Using the Control Efficiency/Outlet Concentration Compliance Option 3 Table 3 to Subpart KKKK of Part 63... of Part 63—Emission Limits for Affected Sources Using the Control Efficiency/Outlet Concentration... following table as required by § 63.3490(d). If you use the control efficiency/outlet concentration option...
Maximum permissible concentrations of uranium in air
Adams, N
1973-01-01
The retention of uranium by bone and kidney has been re-evaluated taking account of recently published data for a man who had been occupationally exposed to natural uranium aerosols and for adults who had ingested uranium at the normal dietary levels. For life-time occupational exposure to uranium aerosols the new retention functions yield a greater retention in bone and a smaller retention in kidney than the earlier ones, which were based on acute intakes of uranium by terminal patients. Hence bone replaces kidney as the critical organ. The (MPC) sub a for uranium 238 on radiological considerations using the current (1959) ICRP lung model for the new retention functions is slightly smaller than for earlier functions but the (MPC) sub a determined by chemical toxicity remains the most restrictive.
Bittel, R.; Mancel, J. [Commissariat a l' Energie Atomique, 92 - Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires, departement de la protection sanitaire
1968-10-01
The most important carriers of radioactive contamination of man are the whole of foodstuffs and not only ingested water or inhaled air. That is the reason why, in accordance with the spirit of the recent recommendations of the ICRP, it is proposed to substitute the idea of maximum levels of contamination of water to the MPC. In the case of aquatic food chains (aquatic organisms and irrigated foodstuffs), the knowledge of the ingested quantities and of the concentration factors food/water permit to determinate these maximum levels, or to find out a linear relation between the maximum levels in the case of two primary carriers of contamination (continental and sea waters). The notion of critical food-consumption, critical radioelements and formula of waste disposal are considered in the same way, taking care to attach the greatest possible importance to local situations. (authors) [French] Les vecteurs essentiels de la contamination radioactive de l'homme sont les aliments dans leur ensemble, et non seulement l'eau ingeree ou l'air inhale. C'est pourquoi, en accord avec l'esprit des recentes recommandations de la C.I.P.R., il est propose de substituer aux CMA la notion de niveaux limites de contamination des eaux. Dans le cas des chaines alimentaires aquatiques (organismes aquatiques et aliments irrigues), la connaissance des quantites ingerees et celle des facteurs de concentration aliments/eau permettent de determiner ces niveaux limites dans le cas de deux vecteurs primaires de contamination (eaux continentales et eaux oceaniques). Les notions de regime alimentaire critique, de radioelement critique et de formule de rejets sont envisagees, dans le meme esprit, avec le souci de tenir compte le plus possible des situations locales. (auteurs)
Aarón Millán-Oropeza
2015-03-01
Full Text Available Biodiesel from microalgae is a promising technology. Nutrient limitation and the addition of CO2 are two strategies to increase lipid content in microalgae. There are two different types of nitrogen limitation, progressive and abrupt limitation. In this work, the simultaneous effect of initial nitrate concentration, addition of CO2, and nitrogen limitation on biomass, lipid, protein and carbohydrates accumulation were analyzed. An experimental design was established in which initial nitrogen concentration, culture time and CO2 aeration as independent numerical variables with three levels were considered. Nitrogen limitation was taken into account as a categorical independent variable. For the experimental design, all the experiments were performed with progressive nitrogen limitation. The dependent response variables were biomass, lipid production, carbohydrates and proteins. Subsequently, comparison of both types of limitation i.e. progressive and abrupt limitation, was performed. Nitrogen limitation in a progressive mode exerted a greater effect on lipid accumulation. Culture time, nitrogen limitation and the interaction of initial nitrate concentration with nitrogen limitation had higher influences on lipids and biomass production. The highest lipid production and productivity were at 582 mgL-1 (49.7 % lipid, dry weight basis and 41.5 mgL-1d-1, respectively; under the following conditions: 250 mgL-1 of initial nitrate concentration, CO2 supply of 4% (v/v, 12 d of culturing and 2 d in state of nitrogen starvation induced by progressive limitation. This work presents a novel way to perform simultaneous analysis of the effect of the initial concentration of nitrate, nitrogen limitation, and CO2 supply on growth and lipid production of Nannochloropsis oculata, with the aim to produce potential biofuels feedstock.
Li, Hong; Mager, Donald E; Bemer, Meagan J; Salinger, David H; Vicini, Paolo; Sandmaier, Brenda M; Nash, Richard; McCune, Jeannine S
2012-11-01
Mycophenolate mofetil (MMF) is a key component of postgrafting immunosuppression in hematopoietic cell transplant (HCT) recipients. The plasma area under the curve (AUC) of its active metabolite, mycophenolic acid (MPA), is associated with MMF efficacy and toxicity. This study developed a population pharmacokinetic model of MPA in HCT recipients and created limited sampling schedules (LSSs) to enable individualized pharmacotherapy. A retrospective evaluation of MPA concentration-time data following a 2-hour MMF intravenous (IV) infusion was conducted in 77 HCT recipients. The final model consisted of 1 and 2 compartments for MMF and MPA pharmacokinetics, respectively. The mean estimated values (coefficient of variation, %) for total systemic clearance, distributional clearance, and central and peripheral compartment volumes of MPA were 36.9 L/h (34.5%), 15.3 L/h (80.4%), 11.9 L (71.7%), and 182 L (127%), respectively. No covariates significantly explained variability among individuals. Optimal LSSs were derived using a simulation approach based on the scaled mean squared error. A 5-sample schedule of 2, 2.5, 3, 5, and 6 hours from the start of the infusion precisely estimated MPA AUC(0-12 h) for Q12-hour IV MMF. A comparable schedule (2, 2.5, 3, 4, and 6 hours) similarly estimated MPA AUC(0-8) (h) for Q8-hour dosing.
The maximum residue limits and determination of pesticide residues in asparagus%芦笋中农药最大残留限量及检测方法研究进展
宋欢; 车兰兰; 林勤保; 王蓉珍
2012-01-01
总结了芦笋中常用农药及欧盟、日本、美国和我国对其最大残留限量规定，并对农药残留相关检测方法在芦笋等果蔬中的应用进行综述，以期为我国芦笋中农药残留检测和控制提供参考。%Common pesticides used in asparagus planting and the maximum residue limits （MRLs） of those in European Union,Japan,USA and China were summarized,and also the application of relevant determination methods of pesticide residues to asparagus ,vegetables and fruit were reviewed. The paper is aimed at providing reference for pesticide residue determination and controlling in Chinese asparagus field.
杨艳红; 姜兆兴; 赵敏
2015-01-01
食品中农药的最大残留限量(MRLs)是保障食品质量安全的重要立法依据，也是指导食品和农产品等生产的关键技术指标。MRLs的制定方法不仅影响农产品行业的持续发展，而且还对提高我国农产品行业的国际竞争力起到积极作用。本文简要介绍目前国内外 MRLs 标准的现状、涉及农药的种类以及制定农药最大残留限量的依据，概述了基于田间实验数据制定最大残留限量的方法，并且比较了国际上欧盟(EU)、北美自由贸易协定(NAFTA)成员国、经济合作与发展组织(OECD)及农药残留联席会议(JMPR)的限量制定方案。%Pesticide maximum residue limit is a critical legislative basis for food safety and a key technical indicator to instruct food and agro-products. The establishing methods for MRLs not only influence the sustainable development of agricultural industry, but also play an actively role on the improvement of international competitiveness of Chinese agricultural industry. The current situation and principles employed to establish maximum residue limits were briefly introduced in this paper. The methods derived from field trials were summarized for setting MRLs. Meanwhile, the calculation methods proposed by European Union (EU), members of North American Free Trade Agreement (NAFTA), Organization for Economic Cooperation and Development (OECD) and Joint Meeting of Pesticide Residues (JMPR) were compared.
2010-10-04
... International Trade Administration Non-Frozen Apple Juice Concentrate from the People's Republic of China... shipper review of the antidumping duty order on non-frozen apple juice concentrate from the People's... Apple Juice Concentrate from the People's Republic of China: Notice of Preliminary Results of the New...
Hurt, E E; Adams, M C; Barbano, D M
2015-04-01
The objective of our study was to determine if the limiting flux and serum protein (SP) removal were different at 8, 9, or 10% true protein (TP) in the microfiltration (MF) retentate recirculation loop using 0.1-µm ceramic graded permeability membranes with 4-mm-channel diameters operated at 50 °C using a diluted milk protein concentrate with 85% protein on a total solids basis (MPC85) as the MF feed. The limiting flux for the MF of diluted MPC85 was determined at 3 TP concentrations in the recirculation loop (8, 9, and 10%). The experiment was replicated 3 times for a total of 9 runs. On the morning of each run, MPC85 was diluted with reverse osmosis water to an MF feed TP concentration of 5.4%. In all runs, the starting flux was 55 kg/m(2) per hour, the flux was increased in steps until the limiting flux was reached. The minimum flux increase was 10 kg/m(2) per hour. The limiting flux decreased as TP concentration in the recirculation loop increased. The limiting flux was 154 ± 0.3, 133 ± 0.7, and 117 ± 3.3 kg/m(2) per hour at recirculation loop TP concentrations of 8.2 ± 0.07, 9.2 ± 0.04, and 10.2 ± 0.09%, respectively. No effect of recirculation loop TP concentration on the SP removal factor was detected. However, the SP removal factor decreased from 0.80 ± 0.02 to 0.75 ± 0.02 as flux was increased from the starting flux of 55 kg/m(2) per hour to the limiting flux, with a similar decrease seen at all recirculation loop TP concentrations.
Velpen, van der V.; Hollman, P.C.H.; Nielen, van M.; Schouten, E.G.; Mensink, M.R.; Veer, van 't P.; Geelen, A.
2014-01-01
Background/objectives: Isoflavones are present in soy foods and soy-based supplements. Despite low plasma isoflavone concentrations in the general Western population, concentrations in supplement users exceed those suggested to be beneficial for health in Asian populations, raising concerns for
Fastook, James L.; Head, James W.
2014-02-01
Concentric crater fill (CCF) occurs in the interior of impact craters in mid- to high latitudes on Mars and is interpreted to have formed by glacial ice flow and debris covering. We use the characteristics and orientation of deposits comprising CCF, the thickness of pedestal deposits in mid- to high-latitude pedestal craters (Pd), the volumes of the current polar caps, and information about regional slopes and ice rheology to address questions about (1) the maximum thickness of regional ice deposits during the Late Amazonian, (2) the likelihood that these deposits flowed regionally, (3) the geological regions and features most likely to induce ice-flow, and (4) the locations and environments in which ice is likely to have been sequestered up to the present. We find that regional ice flow under Late Amazonian climate conditions requires ice thicknesses exceeding many hundreds of meters for slopes typical of the vast majority of the surface of Mars, a thickness for the mid-latitudes that is well in excess of the total volume available from polar ice reservoirs. This indicates that although conditions for mid- to high-latitude glaciation may have persisted for tens to hundreds of millions of years, the process is “supply limited”, with a steady state reached when the polar ice cap water ice supply becomes exhausted. Impact craters are by far the most abundant landform with associated slopes (interior wall and exterior rim) sufficiently high to induce glacial ice flow under Late Amazonian climate conditions, and topographic slope data show that Amazonian impact craters have been clearly modified, undergoing crater interior slope reduction and floor shallowing. We show that these trends are the predictable response of ice deposition and preferential accumulation and retention in mid- to high-latitude crater interiors during episodes of enhanced spin-axis obliquity. We demonstrate that flow from a single episode of an inter-crater terrain layer comparable to Pedestal
STUDY ON MAXIMUM SPECIFIC SLUDGE ACIVITY OF DIFFERENT ANAEROBIC GRANULAR SLUDGE BY BATCH TESTS
无
2001-01-01
The maximum specific sludge activity of granular sludge from large-scale UASB, IC and Biobed anaerobic reactors were investigated by batch tests. The limitation factors related to maximum specific sludge activity (diffusion, substrate sort, substrate concentration and granular size) were studied. The general principle and procedure for the precise measurement of maximum specific sludge activity were suggested. The potential capacity of loading rate of the IC and Biobed anaerobic reactors were analyzed and compared by use of the batch tests results.
Maximum Autocorrelation Factorial Kriging
Nielsen, Allan Aasbjerg; Conradsen, Knut; Pedersen, John L.
2000-01-01
This paper describes maximum autocorrelation factor (MAF) analysis, maximum autocorrelation factorial kriging, and its application to irregularly sampled stream sediment geochemical data from South Greenland. Kriged MAF images are compared with kriged images of varimax rotated factors from...
Straub, Anthony P; Osuji, Chinedum O; Cath, Tzahi Y; Elimelech, Menachem
2015-10-20
Pressure-retarded osmosis (PRO) is a promising source of renewable energy when hypersaline brines and other high concentration solutions are used. However, membrane performance under conditions suitable for these solutions is poorly understood. In this work, we use a new method to characterize membranes under a variety of pressures and concentrations, including hydraulic pressures up to 48.3 bar and concentrations of up to 3 M NaCl. We find membrane selectivity decreases as the draw solution concentration is increased, with the salt permeability coefficient increasing by a factor of 2 when the draw concentration is changed from 0.6 to 3 M NaCl, even when the applied hydraulic pressure is maintained constant. Additionally, we find that significant pumping energy is required to overcome frictional pressure losses in the spacer-filled feed channel and achieve suitable mass transfer on the feed side of the membrane, especially at high operating pressures. For a meter-long module operating at 41 bar, we estimate feedwater will have to be pumped in at a pressure of at least 3 bar. Both the reduced selectivity and increased pumping energy requirements we observe in PRO will significantly diminish the obtainable net energy, highlighting important new challenges for development of systems utilizing hypersaline draw solutions.
Abolishing the maximum tension principle
Dabrowski, Mariusz P
2015-01-01
We find the series of example theories for which the relativistic limit of maximum tension $F_{max} = c^2/4G$ represented by the entropic force can be abolished. Among them the varying constants theories, some generalized entropy models applied both for cosmological and black hole horizons as well as some generalized uncertainty principle models.
Abolishing the maximum tension principle
Mariusz P. Da̧browski
2015-09-01
Full Text Available We find the series of example theories for which the relativistic limit of maximum tension Fmax=c4/4G represented by the entropic force can be abolished. Among them the varying constants theories, some generalized entropy models applied both for cosmological and black hole horizons as well as some generalized uncertainty principle models.
Kethireddy, V; Oey, I; Jowett, Tim; Bremer, P
2016-09-16
Sub-lethal injury within a microbial population, due to processing treatments or environmental stress, is often assessed as the difference in the number of cells recovered on non-selective media compared to numbers recovered on a "selective media" containing a predetermined maximum non-inhibitory concentration (MNIC) of a selective agent. However, as knowledge of cell metabolic response to injury, population diversity and dynamics increased, the rationale behind the conventional approach of quantifying sub-lethal injury must be scrutinized further. This study reassessed the methodology used to quantify sub-lethal injury for Saccharomyces cerevisiae cells (≈ 4.75 Log CFU/mL) exposed to either a mild thermal (45°C for 0, 10 and 20min) or a mild pulsed electric field treatment (field strengths of 8.0-9.0kV/cm and energy levels of 8, 14 and 21kJ/kg). Treated cells were plated onto either Yeast Malt agar (YM) or YM containing NaCl, as a selective agent at 5-15% in 1% increments. The impact of sub-lethal stress due to initial processing, the stress due to selective agents in the plating media, and the subsequent variation of inhibition following the treatments was assessed based on the CFU count (cell numbers). ANOVA and a generalised least squares model indicated significant effects of media, treatments, and their interaction effects (P<0.05) on cell numbers. It was shown that the concentration of the selective agent used dictated the extent of sub-lethal injury recorded owing to the interaction effects of the selective component (NaCl) in the recovery media. Our findings highlight a potential common misunderstanding on how culture conditions impact on sub-lethal injury. Interestingly for S. cerevisiae cells the number of cells recovered at different NaCl concentrations in the media appears to provide valuable information about the mode of injury, the comparative efficacy of different processing regimes and the inherent degree of resistance within a population. This
Baas, R.; Berg, van der D.
2004-01-01
A two-year project was aimed at decreasing nutrient emission from closed nutrient systems by using high irrigation rates in order to allow lower EC levels in the presence of accumulated Na and Cl. Experimental variables were growing media, irrigation frequencies, EC and NaCl concentrations for cut r
Teresa D'Aprile
2000-11-01
Full Text Available In this paper we study the existence of concentrated solutions of the nonlinear field equation $$ -h^{2}Delta v+V(xv-h^{p}Delta_{p}v+ W'(v=0,, $$ where $v:{mathbb R}^{N}o{mathbb R}^{N+1}$, $Ngeq 3$, $p>N$, the potential $V$ is positive and radial, and $W$ is an appropriate singular function satisfying a suitable symmetric property. Provided that $h$ is sufficiently small, we are able to find solutions with a certain spherical symmetry which exhibit a concentration behaviour near a circle centered at zero as $ho 0^{+}$. Such solutions are obtained as critical points for the associated energy functional; the proofs of the results are variational and the arguments rely on topological tools. Furthermore a penalization-type method is developed for the identification of the desired solutions.
Nogawa, Kazuhiro; Sakurai, Masaru; Ishizaki, Masao; Kido, Teruhiko; Nakagawa, Hideaki; Suwazono, Yasushi
2017-08-01
The aim of this study was to estimate the benchmark dose (BMD) as the threshold limit level of the cadmium (Cd) concentration in rice for itai-itai disease and/or suspected disease; it was based on the data that previously evaluated the association for such diseases with the Cd concentration in rice by using a logistic regression model. From 1971 to 1976, a total of 2446 rice samples were analyzed across the 88 hamlets in the Jinzu river basin. The mean Cd concentration in rice in each hamlet was used as the index of external Cd exposure of the entire population of the hamlet. We employed the incidence of itai-itai disease and/or suspected disease obtained from the available 55 hamlets. As the threshold, the lower limit of the BMD (BMDL) of the Cd concentration in rice for itai-itai disease and/or suspected disease was estimated using a logistic model, setting the benchmark response at 1% or 2%. The estimated BMDLs of the Cd concentration in rice for itai-itai disease and/or suspected disease were 0.62-0.76 and 0.27-0.56 mg kg(-1) in men and women, respectively. The lowest BMDL was 0.27 mg kg(-1) in women. In the present study, the threshold limit level of the Cd concentration in rice for itai-itai disease, which is the most severe form of chronic Cd poisoning, was estimated for the first time. This result provides important information about the worldwide standard for the Cd concentration in rice. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.
20 CFR 229.48 - Family maximum.
2010-04-01
... month on one person's earnings record is limited. This limited amount is called the family maximum. The family maximum used to adjust the social security overall minimum rate is based on the employee's Overall..., when any of the persons entitled to benefits on the insured individual's compensation would, except...
Radon, M.R., E-mail: mark.radon@gmail.co [Department of diagnostic Imaging, Northern General Hospital, Sheffield (United Kingdom); Kaduthodil, M.J.; Jagdish, J.; Matthews, S.; Hill, C.; Bull, M.J.; Morcos, S.K. [Department of diagnostic Imaging, Northern General Hospital, Sheffield (United Kingdom)
2011-01-15
Aim: To assess the feasibility of producing diagnostic multidetector computed tomography (MDCT) pulmonary angiography with low iodine concentration contrast media (150 mg iodine/ml) in patients with suspected acute pulmonary embolism. Materials and methods: Ninety-five randomized patients underwent MDCT (64 row) pulmonary angiography with 100 ml iopromide either at low concentration (LC) of 150 mg iodine/ml (n = 45) or high concentration (HC) of 300 mg iodine/ml (n = 50), delivered at the rate of 5 ml/s via a power injector. Two experienced radiologists, blinded to the concentration used, subjectively assessed the diagnostic quality and confidence using a four-point scale [1 = poor (not diagnostic), 2 = satisfactory, 3 = good, 4 = excellent]. Attenuation values (in HU) were measured in the main proximal branches of the pulmonary arteries. Results: The median diagnostic quality score for both observers was 3.5 (interquartile range 3-4) in the HC group and 2.5 (interquartile range 1.5-3) in the LC group (p < 0.01). The median diagnostic confidence score for both observers was 4 (interquartile range 3-4) in the HC group and 3 (interquartile range 1.5-4) in the LC group (p < 0.01). Both observers rated examinations as diagnostic in 69% of cases in the LC group, compared with 96% of cases in the HC group. Good interobserver agreement was found in both groups (K value 0.72 in the LC group and 0.73 in the HC). Obesity, poor scan timing, and dilution by venous return of non-opacified blood were the main reasons for a reduction in diagnostic quality of examinations in the LC group. Conclusion: Despite a 50% reduction of contrast medium dose in comparison to the standard technique, 150 mg iodine/ml can produce diagnostic MDCT pulmonary angiogram studies in the absence of obesity or high cardiac output and hyper-dynamic pulmonary circulation. Reducing the dose of contrast media would minimize the risk of contrast nephropathy in patients at risk of this complication
Efficiency of autonomous soft nanomachines at maximum power.
Seifert, Udo
2011-01-14
We consider nanosized artificial or biological machines working in steady state enforced by imposing nonequilibrium concentrations of solutes or by applying external forces, torques, or electric fields. For unicyclic and strongly coupled multicyclic machines, efficiency at maximum power is not bounded by the linear response value 1/2. For strong driving, it can even approach the thermodynamic limit 1. Quite generally, such machines fall into three different classes characterized, respectively, as "strong and efficient," "strong and inefficient," and "balanced." For weakly coupled multicyclic machines, efficiency at maximum power has lost any universality even in the linear response regime.
李太平
2012-01-01
Under the information asymmetry and market supervision lack of agri-food quality,the excessively rigorous standard of maximum residue limits（MRLs）for pesticide in agrifood is not only unbeneficial to protect consumer health and ecological environment,but also aggregate serious pesticide residues in agrifood.Taking national standard Maximum Residue Limits for Pesticides in Food（GB2763-2005）as a case,calculated the Theory Daily Intake（TDI）related agrifoods of 439 residue indexes of 126 pesticides with the quantity relation between MRLs,acceptable daily intake（ADI）and TDI,and compared with the customer＇s Real Daily Intake（RDI）related agrifoods.It was found that there were 111 residue indexes related agri-foods which TDI were overly above and beyond their RDI of Chinese residents,accounted for 23.22% of 478 pesticide residue indexes in this national standards.This evidence proved that the national standard had the excessively rigorous tendency really and suggested our government would revise this standard at once in order to eliminate the food safety management trap.%在农产品质量信息不对称、市场监管不到位的情况下,农药最大残留限量标准制定过严,不但不能保护消费者健康和农业生态环境,反而会加剧农产品的农药残留问题泛滥。利用农药最大残留限量（MRLs）、日允许摄入量（ADI）与被测食品每日最大理论摄入量（TDI）三者之间的数量关系,以《食品中农药最大残留限量》GB2763-2005为例,计算了126种农药439个残留指标的TDI值,发现有111个残留指标的TDI值远远大于我国居民每日实际摄入量（RDI）,占GB2763-2005国家标准478个残留限量指标的23.22%,表明我国农药最大残留限量国家标准部分指标值设定存在过严的倾向,建议政府尽快修订该标准,以消除食品安全管理隐患。
Marcum, Jeremy W.; Ferkul, Paul V.; Olson, Sandra L.
2017-01-01
Normal gravity flame blowoff limits in an axisymmetric pmma rod geometry in upward axial stagnation flow are compared with microgravity Burning and Suppression of Solids II (BASS-II) results recently obtained aboard the International Space Station. This testing utilized the same BASS-II concurrent rod geometry, but with the addition of normal gravity buoyant flow. Cast polymethylmethacrylate (pmma) rods of diameters ranging from 0.635 cm to 3.81 cm were burned at oxygen concentrations ranging from 14 to 18 by volume. The forced flow velocity where blowoff occurred was determined for each rod size and oxygen concentration. These blowoff limits compare favorably with the BASS-II results when the buoyant stretch is included and the flow is corrected by considering the blockage factor of the fuel. From these results, the normal gravity blowoff boundary for this axisymmetric rod geometry is determined to be linear, with oxygen concentration directly proportional to flow speed. We describe a new normal gravity upward flame spread test method which extrapolates the linear blowoff boundary to the zero stretch limit to resolve microgravity flammability limits, something current methods cannot do. This new test method can improve spacecraft fire safety for future exploration missions by providing a tractable way to obtain good estimates of material flammability in low gravity.
Kim, Sangsik; Wang, Cong; Jaramillo-Villegas, Jose A; Xue, Xiaoxiao; Bao, Chengying; Xuan, Yi; Leaird, Daniel E; Weiner, Andrew M; Qi, Minghao
2016-01-01
Kerr nonlinearity based frequency combs and solitons have been generated from on-chip optical microresonators with high quality factors and global or local anomalous dispersion. However, fabrication of such resonators usually requires materials and/or processes that are not standard in semiconductor manufacturing facilities. Moreover, in certain frequency regimes such as visible and ultra-violet, the large normal material dispersion makes it extremely difficult to achieve anomalous dispersion. Here we present a concentric racetrack-shaped resonator that achieves anomalous dispersion in a 300 nm thick silicon nitride film, suitable for semiconductor manufacturing but previously thought to result only in waveguides with high normal dispersion, a high intrinsic Q of 1.5 million, and a novel mode-selective coupling scheme that allows coherent combs to be generated. We also provide evidence suggestive of soliton-like pulse formation in the generated comb. Our method can achieve anomalous dispersion over moderately...
Porter, John B; Elalfy, Mohsen; Taher, Ali; Aydinok, Yesim; Lee, Szu-Hee; Sutcharitchan, Pranee; El-Ali, Ali; Han, Jackie; El-Beshlawy, Amal
2017-03-01
In transfusion-dependent anaemias, while absolute serum ferritin levels broadly correlate with liver iron concentration (LIC), relationships between trends in these variables are unclear. These relationships are important because serum ferritin changes are often used to adjust or switch chelation regimens when liver magnetic resonance imaging (MRI) is unavailable. This post hoc analysis of the EPIC study compared serum ferritin and LIC in 317 patients with transfusion-dependent thalassaemia before and after 1 yr of deferasirox. Serum ferritin responses (decreases) occurred in 73% of patients, 80% of whom also have decreased LIC. However, 52% of patients without a serum ferritin response did decrease LIC and by >1 mg Fe/g dw (median 3.9) in 77% of cases. Absolute serum ferritin and LIC values correlated significantly only when serum ferritin was Serum ferritin response was accompanied by decreased LIC in 89% and 70% of cases when serum ferritin was serum ferritin non-response was associated with LIC decrease in over half of patients, use of liver MRI may be particularly useful for differentiating true from apparent non-responders to deferasirox based on serum ferritin trends alone. © 2016 The Authors. European Journal of Haematology Published by John Wiley & Sons Ltd.
Maximum Autocorrelation Factorial Kriging
Nielsen, Allan Aasbjerg; Conradsen, Knut; Pedersen, John L.; Steenfelt, Agnete
2000-01-01
This paper describes maximum autocorrelation factor (MAF) analysis, maximum autocorrelation factorial kriging, and its application to irregularly sampled stream sediment geochemical data from South Greenland. Kriged MAF images are compared with kriged images of varimax rotated factors from an ordinary non-spatial factor analysis, and they are interpreted in a geological context. It is demonstrated that MAF analysis contrary to ordinary non-spatial factor analysis gives an objective discrimina...
Claudia Maria Rodriguez
2012-12-01
Full Text Available The satellite images provided by remote sensors represent an important tool for monitoring, controlling and administering water resources. The aim of this work was to model the spatial distribution of the concentration of chlorhophyll-a and the limit of the photic zone in the Rio Tercero reservoir (Córdoba-Argentina, using images from CBERS-2B satellite and a geographical information system (SIG. We selected 15 samples places wherefrom we measured physical, chemical and biological parameters during the fall of 2008. By using a georeferenced image from sensor CBERS-2B and performing an analysis of the principal components (ACP, we were able to identify associations between variables and reflectance values of the satellite bands. Based on these associations and with simple regression models, we were able to know the spatial distribution of the variables: concentration of chlorophyll-a (R2 = 0, 73 and the limit of the photic zone (R2 = 0, 78 in the reservoir as a whole. We may conclude thata there exists a negative correlation between the concentration of chlorophyll-a and the water transparency in reservoir Rio Tercero, as well as that the sensor used allows us to evaluate the quality of the water in a relative short time.
The Testability of Maximum Magnitude
Clements, R.; Schorlemmer, D.; Gonzalez, A.; Zoeller, G.; Schneider, M.
2012-12-01
Recent disasters caused by earthquakes of unexpectedly large magnitude (such as Tohoku) illustrate the need for reliable assessments of the seismic hazard. Estimates of the maximum possible magnitude M at a given fault or in a particular zone are essential parameters in probabilistic seismic hazard assessment (PSHA), but their accuracy remains untested. In this study, we discuss the testability of long-term and short-term M estimates and the limitations that arise from testing such rare events. Of considerable importance is whether or not those limitations imply a lack of testability of a useful maximum magnitude estimate, and whether this should have any influence on current PSHA methodology. We use a simple extreme value theory approach to derive a probability distribution for the expected maximum magnitude in a future time interval, and we perform a sensitivity analysis on this distribution to determine if there is a reasonable avenue available for testing M estimates as they are commonly reported today: devoid of an appropriate probability distribution of their own and estimated only for infinite time (or relatively large untestable periods). Our results imply that any attempt at testing such estimates is futile, and that the distribution is highly sensitive to M estimates only under certain optimal conditions that are rarely observed in practice. In the future we suggest that PSHA modelers be brutally honest about the uncertainty of M estimates, or must find a way to decrease its influence on the estimated hazard.
赵凤霞; 王正平; 宋学立; 朱景伟; 孙卉卉; 高相彬; 王海涛
2014-01-01
The heavy metal maximum residue limit standard of agricultural products between China and EU was compared to protect health of consumers and meet the demand of export trade development of agricultural products in China and main hazard of Pb,Cd,Hg,Sn,As,Cr and Ni to human body was discussed in the paper.The Pb MRLs of most agricultural products such as cereal,fruits and vegetables in China is no difference with in EU but the Pb MRLs of most agricultural products such as poultry & meat, aquatic animals and dairy products in China is higher than EU.The Cd MRLs of cereal,beans,fruits, vegetables,livestock liver and kidney is no difference with EU but the Cd MRLs of poultry & meat and aquatic products in China is higher than EU.The Hg MRLs of aquatic products is in accord with EU basically and the Hg content in cereal,vegetables,meats,dairy products,eggs and edible mushrooms is regulated in detail.The Sn MRLs of beverages in China is a little more than EU.Total As and inorganic As content in most agricultural products was regulated in GB2762 - 2012.The Ni MRLs of grease and grease products such as hydrogenated vegetable oil and products containing hydrogenated vegetable oil is 1.0 mg/kg.The suggestions to reduce heavy metal content in agricultural products is proposed according to the current status of high heavy metal content in some agricultural products in China compared with developed countries.%为了保护我国消费者的健康，满足农产品出口贸易发展的要求，通过收集整理，简述了 Pb、Cd、Hg、锡（Sn）、As、Cr 和镍（Ni）等几种重金属对人体的主要危害，并对这几种重金属在我国和欧盟主要农产品中的限量标准进行了详细的对比分析。结果表明：Pb，我国谷物、水果和蔬菜等大部分农产品中的限量标准与欧盟一致，禽畜肉类、水产动物类和乳品类等部分农产品中限量标准高于欧盟；Cd，我国的谷物、豆类、水果、蔬菜、禽畜肝脏
Maximum likely scale estimation
Loog, Marco; Pedersen, Kim Steenstrup; Markussen, Bo
2005-01-01
A maximum likelihood local scale estimation principle is presented. An actual implementation of the estimation principle uses second order moments of multiple measurements at a fixed location in the image. These measurements consist of Gaussian derivatives possibly taken at several scales and/or ...
S. S. Chang
2013-02-01
Full Text Available This study elucidated the effects of limited concentrate feeding on growth, plasma profile, and gene expression of gluconeogenic enzymes and visfatin in the liver of Hanwoo beef calves. The purpose of this study was to test that reducing the amount of concentrate would partially be compensated by increasing the intake of forage and by altering the metabolic status. The study utilized 20 Korean native beef calves (Hanwoo; 60 to 70 d of age divided into two groups of 10 calves each for 158 d. Control group calves received the amount of concentrate as per the established Korean feeding standards for Hanwoo, whereas calves in the restricted group only received half the amount of concentrate as per standard requirements. Good quality forage (Timothy hay was available for ad libitum consumption to both groups. Since calves were with their dam until 4 months of age in breeding pens before weaning, the intake of milk before weaning was not recorded, however, the concentrate and forage intakes were recorded daily. Body weights (BW were recorded at start and on 10 d interval. Blood samples were collected at start and at 50 d interval. On the final day of the experiment, liver biopsies were collected from all animals in each group. The BW was not different between the groups at all times, but tended to be higher (p = 0.061 only at final BW in control than restricted group. Total BW gain in the control group was 116.2 kg as opposed to 84.1 kg in restricted group that led to average BW gain of 736 g/d and 532 g/d in respective groups, and the differences were significant (p<0.01. As planned, the calves in the control group had higher concentrate and lower forage intake than the restricted group. The plasma variables like total protein and urea were higher (p<0.05 in control than restricted group. The mRNA expressions for the gluconeogenic enzymes such as cytosolic phosphoenol pyruvate carboxykinase (EC 4.1.1.32 and pyruvate carboxylase (EC 6.4.1.1, and
Piepel, Gregory F. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hutchison, Janine R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Deatherage Kaiser, Brooke L [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Amidan, Brett G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sydor, Michael A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Barrett, Christopher A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)
2015-03-31
The performance of a macrofoam-swab sampling method was evaluated using Bacillus anthracis Sterne (BAS) and Bacillus atrophaeus Nakamura (BG) spores applied at nine low target amounts (2-500 spores) to positive-control plates and test coupons (2 in. × 2 in.) of four surface materials (glass, stainless steel, vinyl tile, and plastic). Test results from cultured samples were used to evaluate the effects of surrogate, surface concentration, and surface material on recovery efficiency (RE), false negative rate (FNR), and limit of detection. For RE, surrogate and surface material had statistically significant effects, but concentration did not. Mean REs were the lowest for vinyl tile (50.8% with BAS, 40.2% with BG) and the highest for glass (92.8% with BAS, 71.4% with BG). FNR values ranged from 0 to 0.833 for BAS and 0 to 0.806 for BG, with values increasing as concentration decreased in the range tested (0.078 to 19.375 CFU/cm^{2}, where CFU denotes ‘colony forming units’). Surface material also had a statistically significant effect. A FNR-concentration curve was fit for each combination of surrogate and surface material. For both surrogates, the FNR curves tended to be the lowest for glass and highest for vinyl title. The FNR curves for BG tended to be higher than for BAS at lower concentrations, especially for glass. Results using a modified Rapid Viability-Polymerase Chain Reaction (mRV-PCR) analysis method were also obtained. The mRV-PCR results and comparisons to the culture results will be discussed in a subsequent report.
Boltz, Joshua P; Morgenroth, Eberhard; Daigger, Glen T; deBarbadillo, Christine; Murthy, Sudhir; Sørensen, Kim H; Stinson, Beverly
2012-12-01
Water-quality standards requiring simultaneous low level effluent N and P concentrations are increasingly common in Europe and the United States of America. Moving bed biofilm reactors (MBBRs) and biologically active filters (BAFs) have been used as post-denitrification biofilm reactors in processes designed and operated for this purpose (Boltz et al., 2010a). There is a paucity of information describing systematic design and operational protocols that will minimize the potential for phosphorus rate-limited conditions as well as a lack of information describing the interaction between these post-denitrification biofilm reactors and unit processes that substantially alter phosphorus speciation (e.g., chemically enhanced clarification). In this paper, a simple mathematical model for estimating the threshold below which P becomes rate-limiting, and the model is presented and evaluated by comparing its predictions with operational data from post-denitrification MBBRs and BAFs. Ortho-phosphorus (PO(4)-P), which is the dissolved reactive component of total phosphorus, was a primary indicator of P rate-limiting conditions in the evaluated post-denitrification biofilm reactors. The threshold below which PO(4)-P becomes the rate-limiting substrate is defined: S(PO4-P):S(NOx-N) = 0.0086 g P/g N and S(PO4-P):S(M) = 0.0013 g P/g COD. Additional analyses indicate J(NOx-N)(avg) =0.48 g/m2/d when S(PO4-P):S(NOx-N) > 0.0086, and J(NOx-N)(avg) = 0.06 g/m2/d when S(PO4-P):S(NOx-N) clarifiers effluent stream, dosing phosphoric acid in the MBBR or BAF influent stream, and/or optimizing secondary process EBPR may overcome phosphorus rate-limitations in the biofilm-based post-denitrification process. Copyright © 2012 Elsevier Ltd. All rights reserved.
Maximum information photoelectron metrology
Hockett, P; Wollenhaupt, M; Baumert, T
2015-01-01
Photoelectron interferograms, manifested in photoelectron angular distributions (PADs), are a high-information, coherent observable. In order to obtain the maximum information from angle-resolved photoionization experiments it is desirable to record the full, 3D, photoelectron momentum distribution. Here we apply tomographic reconstruction techniques to obtain such 3D distributions from multiphoton ionization of potassium atoms, and fully analyse the energy and angular content of the 3D data. The PADs obtained as a function of energy indicate good agreement with previous 2D data and detailed analysis [Hockett et. al., Phys. Rev. Lett. 112, 223001 (2014)] over the main spectral features, but also indicate unexpected symmetry-breaking in certain regions of momentum space, thus revealing additional continuum interferences which cannot otherwise be observed. These observations reflect the presence of additional ionization pathways and, most generally, illustrate the power of maximum information measurements of th...
Fluck, J.
1992-02-15
Justified complaints are being made about the increasing duration of licensing procedures. The environmental impact assessment will doubtlessly lead to a further prolongation of procedures. One of the instruments always spoken of as a means for reducing the length of procedures is the concentrating effect of licences. However it poses its own problems, particularly in connection with the scose limitations provided by paragraph 13 of the Federal Immission Control Law. Some of these are addressed, the emphasis lying on the relationship between the regulations of immission control law and water law. The recommendation of the independent commission for the simplification of law and administration to incorporate permits under water law into the process of concentration is also commented on. The author comes to the conclusion that concentration cannot remedy short comings in the equipment of authorities with staff and technical means, which are opposed to any attempt to speed up juidicial bussiness. Efforts to do so in spite of this can only succeed at the cost of placing restrictions on oor dispensing with the conventional administrative procedure or even placing restrictions on substantive law. (orig./HSCH).
Maximum permissible voltage of YBCO coated conductors
Wen, J.; Lin, B.; Sheng, J.; Xu, J.; Jin, Z. [Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China); Hong, Z., E-mail: zhiyong.hong@sjtu.edu.cn [Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China); Wang, D.; Zhou, H.; Shen, X.; Shen, C. [Qingpu Power Supply Company, State Grid Shanghai Municipal Electric Power Company, Shanghai (China)
2014-06-15
Highlights: • We examine three kinds of tapes’ maximum permissible voltage. • We examine the relationship between quenching duration and maximum permissible voltage. • Continuous I{sub c} degradations under repetitive quenching where tapes reaching maximum permissible voltage. • The relationship between maximum permissible voltage and resistance, temperature. - Abstract: Superconducting fault current limiter (SFCL) could reduce short circuit currents in electrical power system. One of the most important thing in developing SFCL is to find out the maximum permissible voltage of each limiting element. The maximum permissible voltage is defined as the maximum voltage per unit length at which the YBCO coated conductors (CC) do not suffer from critical current (I{sub c}) degradation or burnout. In this research, the time of quenching process is changed and voltage is raised until the I{sub c} degradation or burnout happens. YBCO coated conductors test in the experiment are from American superconductor (AMSC) and Shanghai Jiao Tong University (SJTU). Along with the quenching duration increasing, the maximum permissible voltage of CC decreases. When quenching duration is 100 ms, the maximum permissible of SJTU CC, 12 mm AMSC CC and 4 mm AMSC CC are 0.72 V/cm, 0.52 V/cm and 1.2 V/cm respectively. Based on the results of samples, the whole length of CCs used in the design of a SFCL can be determined.
Lohakare, J D; van de Sand, H; Gerlach, K; Hosseini, A; Mielenz, M; Sauerwein, H; Pries, M; Südekum, K-H
2012-02-01
This study elucidated the effects of limited concentrate feeding on growth, nutrient digestibility, blood profile and gene expression of gluconeogenic enzymes in the liver of dairy calves. The study utilized 36 German Holstein dairy calves (5-7 days of age) divided into two groups of 18 calves each for 150 days. Control group calves received 2 kg/(calf × day) of concentrate, whereas calves in the restricted group received only 1 kg/(calf × day). Good quality forage (mixture of maize and grass silages) was available for ad libitum consumption to both groups. The intake of milk replacer before weaning, and of concentrate were recorded daily per calf; however, the consumption of forages was quantified as daily average of the group. Body weights (BW) were recorded at start and on days 35, 70, 112 and 150. Blood and serum samples and spot urinary and faecal samples were also collected at similar time points. On days 70 and 150, liver biopsies were collected from seven animals in each group. The BW was not different between the groups at all times. Total BW gain in the control group was 124 kg as opposed to 111 kg in restricted group that led to average BW gain of 827 g/day and 739 g/day in respective groups, and the differences were significant (p = 0.018). As planned, the control group had higher concentrate and lower forage intake than the restricted group. The blood haemoglobin, haematocrit and serum variables (glucose, total protein, albumin and urea) were within the normal range in both groups, but serum glucose was higher (p < 0.05) in control than in restricted group at 70 days. There was no difference between groups in organic matter (OM) digestibility which declined (p < 0.001) with increasing age in both groups. Microbial crude protein (MCP) synthesis estimated from urinary allantoin excretion increased (p < 0.001) in both groups with increasing age but was not different between groups. The mRNA expressions for the gluconeogenic enzymes, cytosolic and
Maximum Likelihood Associative Memories
Gripon, Vincent; Rabbat, Michael
2013-01-01
Associative memories are structures that store data in such a way that it can later be retrieved given only a part of its content -- a sort-of error/erasure-resilience property. They are used in applications ranging from caches and memory management in CPUs to database engines. In this work we study associative memories built on the maximum likelihood principle. We derive minimum residual error rates when the data stored comes from a uniform binary source. Second, we determine the minimum amo...
Maximum likely scale estimation
Loog, Marco; Pedersen, Kim Steenstrup; Markussen, Bo
2005-01-01
A maximum likelihood local scale estimation principle is presented. An actual implementation of the estimation principle uses second order moments of multiple measurements at a fixed location in the image. These measurements consist of Gaussian derivatives possibly taken at several scales and....../or having different derivative orders. Although the principle is applicable to a wide variety of image models, the main focus here is on the Brownian model and its use for scale selection in natural images. Furthermore, in the examples provided, the simplifying assumption is made that the behavior...... of the measurements is completely characterized by all moments up to second order....
Pearce, Jonathan V.; Gisby, John A.; Steur, Peter P. M.
2016-08-01
A knowledge of the effect of impurities at the level of parts per million on the freezing temperature of very pure metals is essential for realisation of ITS-90 fixed points. New information has become available for use with the thermodynamic modelling software MTDATA, permitting calculation of liquidus slopes, in the low concentration limit, of a wider range of binary alloy systems than was previously possible. In total, calculated values for 536 binary systems are given. In addition, new experimental determinations of phase diagrams, in the low impurity concentration limit, have recently appeared. All available data have been combined to provide a comprehensive set of liquidus slopes for impurities in ITS-90 metal fixed points. In total, liquidus slopes for 838 systems are tabulated for the fixed points Hg, Ga, In, Sn, Zn, Al, Ag, Au, and Cu. It is shown that the value of the liquidus slope as a function of impurity element atomic number can be approximated using a simple formula, and good qualitative agreement with the existing data is observed for the fixed points Al, Ag, Au and Cu, but curiously the formula is not applicable to the fixed points Hg, Ga, In, Sn, and Zn. Some discussion is made concerning the influence of oxygen on the liquidus slopes, and some calculations using MTDATA are discussed. The BIPM’s consultative committee for thermometry has long recognised that the sum of individual estimates method is the ideal approach for assessing uncertainties due to impurities, but the community has been largely powerless to use the model due to lack of data. Here, not only is data provided, but a simple model is given to enable known thermophysical data to be used directly to estimate impurity effects for a large fraction of the ITS-90 fixed points.
Masters, Joanna C.; Harano, Denise M.; Greenberg, Howard E.; Tsunoda, Shirley M.; Jang, In-Jin; Ma, Joseph D.
2014-01-01
Objective Intravenous (IV) midazolam is the preferred cytochrome P450 (CYP) 3A probe for phenotyping, with systemic clearance (CL) estimating hepatic CYP3A activity. A limited sampling strategy was conducted to determine if partial area-under-the-concentration-time-curves (AUCs) could reliably estimate midazolam systemic CL during conditions of CYP3A baseline activity, inhibition and induction/activation. Methods Midazolam plasma concentrations during CYP3A baseline (n=93), inhibition (n=40), and induction/activation (n=33) were obtained from seven studies in healthy adults. Non-compartmental analysis determined observed CL (CLobs) and partial AUCs. Linear regression equations were derived from partial AUCs to estimate CL (CLpred) during CYP3A baseline, inhibition and induction/activation. Pre-established criterion for linear regression analysis was r2 ≥0.9. CLpred was compared to CLobs, and relative bias and precision were assessed using percent mean prediction error (%MPE) and percent mean absolute error (%MAE). Results During CYP3A baseline and inhibition, all evaluated partial AUCs failed to meet criterion of r2 ≥0.9 and/or %MAE midazolam partial AUC0–1, AUC0–2, and AUC0–4 reliably estimated systemic CL, and consequently hepatic CYP3A activity in healthy adults. PMID:25004135
Markelz, R J Cody; Lai, Lisa X; Vosseler, Lauren N; Leakey, Andrew D B
2014-04-01
Plant respiration responses to elevated CO2 concentration ( [CO2 ] ) have been studied for three decades without consensus about the mechanism of response. Positive effects of elevated [CO2 ] on leaf respiration have been attributed to greater substrate supply resulting from stimulated photosynthesis. Negative effects of elevated [CO2 ] on leaf respiration have been attributed to reduced demand for energy for protein turnover assumed to result from lower leaf N content. Arabidopsis thaliana was grown in ambient (370 ppm) and elevated (750 ppm) [CO2 ] with limiting and ample N availabilities. The stimulation of leaf dark respiration was attenuated in limiting N (+12%) compared with ample N supply (+30%). This response was associated with smaller stimulation of photosynthetic CO2 uptake, but not interactive effects of elevated CO2 and N supply on leaf protein, amino acids or specific leaf area. Elevated [CO2 ] also resulted in greater abundance of transcripts for many components of the respiratory pathway. A greater transcriptional response to elevated [CO2 ] was observed in ample N supply at midday versus midnight, consistent with reports that protein synthesis is greatest during the day. Greater foliar expression of respiratory genes under elevated [CO2 ] has now been observed in diverse herbaceous species, suggesting a widely conserved response. © 2013 John Wiley & Sons Ltd.
Wagner, Michael; Reiche, Katharina; Blume, Alfred; Garidel, Patrick
2013-01-01
Photon correlation spectroscopy (PCS) is compared with classic rheological measurements using the cone-and-plate technique for the determination of the viscosity of protein solutions. The potential advantages using PCS are small sample volume and fast determination of zero-shear viscosity. The present study assesses potentials and limitations of the applicability of this method for the determination of viscosity of antibody solutions in protein science development. The principle of the assay is based on the determination of the apparent hydrodynamic radius of commercial available latex beads of known size added to protein solutions. Using the Stokes-Einstein equation, the hydrodynamic radius can be converted to viscosity. Several latex particle sizes and concentrations were evaluated and the assay optimized. The PCS assay for viscosity determination was tested using water/glycerol-mixtures, where the viscosity was measured with rheometer using the cone-and-plate method and also compared with published data. Different protein solutions of bovine serum albumin, lysozyme and monoclonal antibodies were then used and the PCS results were compared with viscosity data obtained by the cone-and-plate method. It could be shown that the PCS assay has limitations for the determination of the viscosity of protein solutions, especially monoclonal antibodies. The main reason is due to protein-latex bead interactions leading to the formation of larger aggregates. The use of surface modification of the latex beads can in principle prevent this interaction.
F. TopsÃƒÂ¸e
2001-09-01
Full Text Available Abstract: In its modern formulation, the Maximum Entropy Principle was promoted by E.T. Jaynes, starting in the mid-fifties. The principle dictates that one should look for a distribution, consistent with available information, which maximizes the entropy. However, this principle focuses only on distributions and it appears advantageous to bring information theoretical thinking more prominently into play by also focusing on the "observer" and on coding. This view was brought forward by the second named author in the late seventies and is the view we will follow-up on here. It leads to the consideration of a certain game, the Code Length Game and, via standard game theoretical thinking, to a principle of Game Theoretical Equilibrium. This principle is more basic than the Maximum Entropy Principle in the sense that the search for one type of optimal strategies in the Code Length Game translates directly into the search for distributions with maximum entropy. In the present paper we offer a self-contained and comprehensive treatment of fundamentals of both principles mentioned, based on a study of the Code Length Game. Though new concepts and results are presented, the reading should be instructional and accessible to a rather wide audience, at least if certain mathematical details are left aside at a rst reading. The most frequently studied instance of entropy maximization pertains to the Mean Energy Model which involves a moment constraint related to a given function, here taken to represent "energy". This type of application is very well known from the literature with hundreds of applications pertaining to several different elds and will also here serve as important illustration of the theory. But our approach reaches further, especially regarding the study of continuity properties of the entropy function, and this leads to new results which allow a discussion of models with so-called entropy loss. These results have tempted us to speculate over
Regularized maximum correntropy machine
Wang, Jim Jing-Yan
2015-02-12
In this paper we investigate the usage of regularized correntropy framework for learning of classifiers from noisy labels. The class label predictors learned by minimizing transitional loss functions are sensitive to the noisy and outlying labels of training samples, because the transitional loss functions are equally applied to all the samples. To solve this problem, we propose to learn the class label predictors by maximizing the correntropy between the predicted labels and the true labels of the training samples, under the regularized Maximum Correntropy Criteria (MCC) framework. Moreover, we regularize the predictor parameter to control the complexity of the predictor. The learning problem is formulated by an objective function considering the parameter regularization and MCC simultaneously. By optimizing the objective function alternately, we develop a novel predictor learning algorithm. The experiments on two challenging pattern classification tasks show that it significantly outperforms the machines with transitional loss functions.
Lascano, G J; Zanton, G I; Suarez-Mena, F X; Heinrichs, A J
2009-10-01
Growth and digestibility were examined for heifers limit fed high- (HC; 60%) and low-concentrate (LC; 20%) diets with or without yeast culture (YC) addition in 2 experiments. A third experiment was undertaken to monitor first-lactation production of heifers limit fed HC or LC diets. In experiment 1, 32 Holstein heifers were individually fed at controlled intakes for 133 d to maintain a targeted average daily gain of 0.80 kg/d for all 4 treatments [HC; LC with and without Saccharomyces cerevisiae; Yea-Sacc(1026) (Alltech Inc., Nicholasville, KY), 1 g/kg as fed]. Targeted average daily gain was achieved for all treatments during the individual feeding period (0.80 +/- 0.01 kg/d). Average dry matter intake needed to maintain constant gain was slightly reduced for HC and YC treatments. Reduced dry matter intake and similar targeted average daily gain resulted in a tendency for improved feed efficiency of HC-fed heifers. Skeletal measurements and targeted average daily gain were not affected by concentrate level or YC. The objective of experiment 2 was to elucidate effects of concentrate level and YC on nutrient digestibility. Four young (284.35 +/- 4.51 d) and 4 older (410.28 +/- 2.14 d) heifers were allocated to the 4 treatments used in experiment 1. Heifers fed the HC diet had increased dry matter digestibility (75.67 vs.72.96 +/- 0.72%), and YC addition increased dry matter digestibility (74.97 vs. 73.65 +/- 0.71%). Intake of N and apparent N digestibility were similar for all treatments. High-concentrate diets and YC addition decreased wet and dry matter output of feces. Urine excretion was not different; therefore, total manure output was lower for HC-fed heifers as compared with LC-fed heifers. Results suggest that HC diets can improve feed efficiency without affecting growth when limit fed to dairy heifers. Yeast culture increased dry matter digestibility in HC- and LC-fed heifers; HC diets were more digestible and reduced fecal output, with YC enhancing this
Department of Housing and Urban Development — In accordance with 24 CFR Part 92.252, HUD provides maximum HOME rent limits. The maximum HOME rents are the lesser of: The fair market rent for existing housing for...
Economics and Maximum Entropy Production
Lorenz, R. D.
2003-04-01
Price differentials, sales volume and profit can be seen as analogues of temperature difference, heat flow and work or entropy production in the climate system. One aspect in which economic systems exhibit more clarity than the climate is that the empirical and/or statistical mechanical tendency for systems to seek a maximum in production is very evident in economics, in that the profit motive is very clear. Noting the common link between 1/f noise, power laws and Self-Organized Criticality with Maximum Entropy Production, the power law fluctuations in security and commodity prices is not inconsistent with the analogy. There is an additional thermodynamic analogy, in that scarcity is valued. A commodity concentrated among a few traders is valued highly by the many who do not have it. The market therefore encourages via prices the spreading of those goods among a wider group, just as heat tends to diffuse, increasing entropy. I explore some empirical price-volume relationships of metals and meteorites in this context.
Equalized near maximum likelihood detector
2012-01-01
This paper presents new detector that is used to mitigate intersymbol interference introduced by bandlimited channels. This detector is named equalized near maximum likelihood detector which combines nonlinear equalizer and near maximum likelihood detector. Simulation results show that the performance of equalized near maximum likelihood detector is better than the performance of nonlinear equalizer but worse than near maximum likelihood detector.
Cheeseman, Peter; Stutz, John
2005-01-01
A long standing mystery in using Maximum Entropy (MaxEnt) is how to deal with constraints whose values are uncertain. This situation arises when constraint values are estimated from data, because of finite sample sizes. One approach to this problem, advocated by E.T. Jaynes [1], is to ignore this uncertainty, and treat the empirically observed values as exact. We refer to this as the classic MaxEnt approach. Classic MaxEnt gives point probabilities (subject to the given constraints), rather than probability densities. We develop an alternative approach that assumes that the uncertain constraint values are represented by a probability density {e.g: a Gaussian), and this uncertainty yields a MaxEnt posterior probability density. That is, the classic MaxEnt point probabilities are regarded as a multidimensional function of the given constraint values, and uncertainty on these values is transmitted through the MaxEnt function to give uncertainty over the MaXEnt probabilities. We illustrate this approach by explicitly calculating the generalized MaxEnt density for a simple but common case, then show how this can be extended numerically to the general case. This paper expands the generalized MaxEnt concept introduced in a previous paper [3].
Optimal Control of Polymer Flooding Based on Maximum Principle
Yang Lei
2012-01-01
Full Text Available Polymer flooding is one of the most important technologies for enhanced oil recovery (EOR. In this paper, an optimal control model of distributed parameter systems (DPSs for polymer injection strategies is established, which involves the performance index as maximum of the profit, the governing equations as the fluid flow equations of polymer flooding, and the inequality constraint as the polymer concentration limitation. To cope with the optimal control problem (OCP of this DPS, the necessary conditions for optimality are obtained through application of the calculus of variations and Pontryagin’s weak maximum principle. A gradient method is proposed for the computation of optimal injection strategies. The numerical results of an example illustrate the effectiveness of the proposed method.
Wang, Zheming; Felmy, Andrew R.; Xia, Yuanxian; Buck, Edgar C.
2006-07-20
Eu(III), Cm(III) and the uranyl ion display intense fluorescence spectra in the visible range and the spectroscopic characteristics are dependent on the composition and structure of the individual metal complexes. In this work, we demonstrate the application of laser-induced time-resolved fluorescence spectroscopy in identification of nanoparticles of (1) Eu(III) and Cm(III) in basic solutions (pH > 10) in the presence of organic chelates including EDTA, HEDTA, NTA and oxalate and (2) sodium uranyl phosphate after equilibration with synthetic sodium uranyl phosphate suspensions. Fluorescence spectral and SEM results indicate that Eu(III) and Cm(III) can exist as colloidal nanoparticles in filtered 0.1 M NaOH solutions. Such nanoparticles, which display largely red-shifted fluorescence spectra as compared with the aqueous complexes and unusually short fluorescence lifetimes, contribute to the measured concentrations of Eu(III)/Cm(III) in the aqueous solutions. Similarly, uranyl spectroscopic signatures indicate that the determination of the solubility of uranium phosphate minerals is prone to the presence of uranyl phosphate nanoparticles. Due to the presence of such nanoparticles, the common solubility measurements may only indicate an upper limit of the ''true'' solubility.
Wang Zheming [Pacific Northwest National Laboratory, Richland, WA 99352 (United States)]. E-mail: Zheming.wang@pnl.gov; Felmy, Andrew R. [Pacific Northwest National Laboratory, Richland, WA 99352 (United States); Xia Yuanxian [Pacific Northwest National Laboratory, Richland, WA 99352 (United States); Buck, Edgar C. [Pacific Northwest National Laboratory, Richland, WA 99352 (United States)
2006-07-20
Eu(III), Cm(III) and the uranyl ion display intense fluorescence spectra in the visible range and the spectroscopic characteristics are dependent on the composition and structure of the individual metal complexes. In this work, we demonstrate the application of laser-induced time-resolved fluorescence spectroscopy in identification of nanoparticles of (i) Eu(III) and Cm(III) in basic solutions (pH > 10) in the presence of organic chelates including EDTA, HEDTA, NTA and oxalate and (ii) sodium uranyl phosphate after equilibration with synthetic sodium uranyl phosphate suspensions. Fluorescence spectral and SEM results indicate that Eu(III) and Cm(III) can exist as colloidal nanoparticles in filtered 0.1 M NaOH solutions. Such nanoparticles, which display largely red-shifted fluorescence spectra as compared with the aqueous complexes and unusually short fluorescence lifetimes, contribute to the measured concentrations of Eu(III)/Cm(III) in the aqueous solutions. Similarly, uranyl spectroscopic signatures indicate that the determination of the solubility of uranium phosphate minerals is prone to the presence of uranyl phosphate nanoparticles. Due to the presence of such nanoparticles, the common solubility measurements may only indicate an upper limit of the 'true' solubility.
Nadine Essayem
2012-09-01
Full Text Available 5-Hydroxymethylfurfural (5-HMF is an important bio-sourced intermediate, formed from carbohydrates such as glucose or fructose. The treatment at 150–250 °C of glucose or fructose in pure water and batch conditions, with catalytic amounts of most of the usual acid-basic solid catalysts, gave limited yields in 5-HMF, due mainly to the fast formation of soluble oligomers. Niobic acid, which possesses both Lewis and Brønsted acid sites, gave the highest 5-HMF yield, 28%, when high catalyst/glucose ratio is used. By contrast, we disclose in this work that the reaction of fructose in concentrated aqueous solutions of carboxylic acids, formic, acetic or lactic acids, used as reactive solvent media, leads to the selective dehydration of fructose in 5-HMF with yields up to 64% after 2 hours at 150 °C. This shows the potential of such solvent systems for the clean and easy production of 5-HMF from carbohydrates. The influence of adding solid catalysts to the carboxylic acid media was also reported, starting from glucose.
Maximum magnitude earthquakes induced by fluid injection
McGarr, Arthur F.
2014-01-01
Analysis of numerous case histories of earthquake sequences induced by fluid injection at depth reveals that the maximum magnitude appears to be limited according to the total volume of fluid injected. Similarly, the maximum seismic moment seems to have an upper bound proportional to the total volume of injected fluid. Activities involving fluid injection include (1) hydraulic fracturing of shale formations or coal seams to extract gas and oil, (2) disposal of wastewater from these gas and oil activities by injection into deep aquifers, and (3) the development of enhanced geothermal systems by injecting water into hot, low-permeability rock. Of these three operations, wastewater disposal is observed to be associated with the largest earthquakes, with maximum magnitudes sometimes exceeding 5. To estimate the maximum earthquake that could be induced by a given fluid injection project, the rock mass is assumed to be fully saturated, brittle, to respond to injection with a sequence of earthquakes localized to the region weakened by the pore pressure increase of the injection operation and to have a Gutenberg-Richter magnitude distribution with a b value of 1. If these assumptions correctly describe the circumstances of the largest earthquake, then the maximum seismic moment is limited to the volume of injected liquid times the modulus of rigidity. Observations from the available case histories of earthquakes induced by fluid injection are consistent with this bound on seismic moment. In view of the uncertainties in this analysis, however, this should not be regarded as an absolute physical limit.
Maximum magnitude earthquakes induced by fluid injection
McGarr, A.
2014-02-01
Analysis of numerous case histories of earthquake sequences induced by fluid injection at depth reveals that the maximum magnitude appears to be limited according to the total volume of fluid injected. Similarly, the maximum seismic moment seems to have an upper bound proportional to the total volume of injected fluid. Activities involving fluid injection include (1) hydraulic fracturing of shale formations or coal seams to extract gas and oil, (2) disposal of wastewater from these gas and oil activities by injection into deep aquifers, and (3) the development of enhanced geothermal systems by injecting water into hot, low-permeability rock. Of these three operations, wastewater disposal is observed to be associated with the largest earthquakes, with maximum magnitudes sometimes exceeding 5. To estimate the maximum earthquake that could be induced by a given fluid injection project, the rock mass is assumed to be fully saturated, brittle, to respond to injection with a sequence of earthquakes localized to the region weakened by the pore pressure increase of the injection operation and to have a Gutenberg-Richter magnitude distribution with a b value of 1. If these assumptions correctly describe the circumstances of the largest earthquake, then the maximum seismic moment is limited to the volume of injected liquid times the modulus of rigidity. Observations from the available case histories of earthquakes induced by fluid injection are consistent with this bound on seismic moment. In view of the uncertainties in this analysis, however, this should not be regarded as an absolute physical limit.
Hu, Longhua
2016-10-02
Materials, such as electrical wire, used in spacecraft must pass stringent fire safety standards. Tests for such standards are typically performed under normal gravity conditions and then extended to applications under microgravity conditions. The experiments reported here used polyethylene (PE)-insulated (thickness of 0.15 mm) Nichrome (NiCr)-core (diameter of 0.5 mm) electrical wires. Limiting oxygen concentrations (LOC) at extinction were measured for upward spreading flame at various forced opposed-flow (downward) speeds (0−25 cm/s) at several inclination angles (0−75°) under normal gravity conditions. The differences from those previously obtained under microgravity conditions were quantified and correlated to provide a reference for the development of fire safety test standards for electrical wires to be used in space exploration. It was found that as the opposed-flow speed increased for a specified inclination angle (except the horizontal case), LOC first increased, then decreased and finally increased again. The first local maximum of this LOC variation corresponded to a critical forced flow speed resulted from the change in flame spread pattern from concurrent to counter-current type. This critical forced flow speed correlated well with the buoyancy-induced flow speed component in the wire\\'s direction when the flame base width along the wire was used as a characteristic length scale. LOC was generally higher under the normal gravity than under the microgravity and the difference between the two decreased as the opposed-flow speed increases, following a reasonably linear trend at relatively higher flow speeds (over 10 cm/s). The decrease in the difference in LOC under normal- and microgravity conditions as the opposed-flow speed increases correlated well with the gravity acceleration component in the wire\\'s direction, providing a measure to extend LOC determined by the tests under normal gravity conditions (at various inclination angles and opposed
Fundamental limitations in antenna resolution by maximum entropy methods
Bevensee, R.M.
1984-08-01
This paper summarizes work done during the past few years on antenna super-resolution of distant radiating sources, both incoherent with and without additive noise and coherent with and without additive noise.
5 CFR 582.402 - Maximum garnishment limitations.
2010-01-01
... Section 582.402 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS... disposable earnings subject to garnishment to enforce any legal debt other than an order for child support or...), shall not exceed 25 percent of the employee-obligor's aggregate disposable earnings for any workweek....
77 FR 37554 - Calculation of Maximum Obligation Limitation
2012-06-22
... Orderly Liquidation Authority (``OLA'') to resolve a large interconnected financial company upon a... on financial stability in the United States and the use of OLA would avoid or mitigate such adverse... of law. \\7\\ Dodd Frank Act, section 202(a)(1)(A)(iii). The OLA in the Dodd-Frank Act is intended as...
76 FR 72645 - Calculation of Maximum Obligation Limitation
2011-11-25
... that fair value measurement is context dependant and the result of numerous variables, including the... fair value of the total consolidated assets of each covered financial company that are available for... of each covered financial company be measured at their ``fair value.'' The Dodd-Frank Act does not...
2010-07-01
... NEW SOURCE PERFORMANCE STANDARDS Alkaline Mine Drainage § 434.43 Effluent limitations guidelines... Maximum for any 1 day Average of daily values for 30 consecutive days Concentration in mg/l Iron, total 7...
Maximum stellar iron core mass
F W Giacobbe
2003-03-01
An analytical method of estimating the mass of a stellar iron core, just prior to core collapse, is described in this paper. The method employed depends, in part, upon an estimate of the true relativistic mass increase experienced by electrons within a highly compressed iron core, just prior to core collapse, and is signiﬁcantly different from a more typical Chandrasekhar mass limit approach. This technique produced a maximum stellar iron core mass value of 2.69 × 1030 kg (1.35 solar masses). This mass value is very near to the typical mass values found for neutron stars in a recent survey of actual neutron star masses. Although slightly lower and higher neutron star masses may also be found, lower mass neutron stars are believed to be formed as a result of enhanced iron core compression due to the weight of non-ferrous matter overlying the iron cores within large stars. And, higher mass neutron stars are likely to be formed as a result of fallback or accretion of additional matter after an initial collapse event involving an iron core having a mass no greater than 2.69 × 1030 kg.
Maximum permissible voltage of YBCO coated conductors
Wen, J.; Lin, B.; Sheng, J.; Xu, J.; Jin, Z.; Hong, Z.; Wang, D.; Zhou, H.; Shen, X.; Shen, C.
2014-06-01
Superconducting fault current limiter (SFCL) could reduce short circuit currents in electrical power system. One of the most important thing in developing SFCL is to find out the maximum permissible voltage of each limiting element. The maximum permissible voltage is defined as the maximum voltage per unit length at which the YBCO coated conductors (CC) do not suffer from critical current (Ic) degradation or burnout. In this research, the time of quenching process is changed and voltage is raised until the Ic degradation or burnout happens. YBCO coated conductors test in the experiment are from American superconductor (AMSC) and Shanghai Jiao Tong University (SJTU). Along with the quenching duration increasing, the maximum permissible voltage of CC decreases. When quenching duration is 100 ms, the maximum permissible of SJTU CC, 12 mm AMSC CC and 4 mm AMSC CC are 0.72 V/cm, 0.52 V/cm and 1.2 V/cm respectively. Based on the results of samples, the whole length of CCs used in the design of a SFCL can be determined.
den Hertog, J; Stulen, G; Posthumus, F.S; Poorter, H
1998-01-01
To assess the interactions between concentration of atmospheric CO2 and N supply, the response of Plantago major ssp. pleiosperma Pilger to a doubling of the ambient CO2 concentration of 350 mu l l(-1) was investigated in a range of exponential rates of N addition. The relative growth rate (RGR) as
Maximum floodflows in the conterminous United States
Crippen, John R.; Bue, Conrad D.
1977-01-01
Peak floodflows from thousands of observation sites within the conterminous United States were studied to provide a guide for estimating potential maximum floodflows. Data were selected from 883 sites with drainage areas of less than 10,000 square miles (25,900 square kilometers) and were grouped into regional sets. Outstanding floods for each region were plotted on graphs, and envelope curves were computed that offer reasonable limits for estimates of maximum floods. The curves indicate that floods may occur that are two to three times greater than those known for most streams.
Maximum-biomass prediction of homofermentative Lactobacillus.
Cui, Shumao; Zhao, Jianxin; Liu, Xiaoming; Chen, Yong Q; Zhang, Hao; Chen, Wei
2016-07-01
Fed-batch and pH-controlled cultures have been widely used for industrial production of probiotics. The aim of this study was to systematically investigate the relationship between the maximum biomass of different homofermentative Lactobacillus and lactate accumulation, and to develop a prediction equation for the maximum biomass concentration in such cultures. The accumulation of the end products and the depletion of nutrients by various strains were evaluated. In addition, the minimum inhibitory concentrations (MICs) of acid anions for various strains at pH 7.0 were examined. The lactate concentration at the point of complete inhibition was not significantly different from the MIC of lactate for all of the strains, although the inhibition mechanism of lactate and acetate on Lactobacillus rhamnosus was different from the other strains which were inhibited by the osmotic pressure caused by acid anions at pH 7.0. When the lactate concentration accumulated to the MIC, the strains stopped growing. The maximum biomass was closely related to the biomass yield per unit of lactate produced (YX/P) and the MIC (C) of lactate for different homofermentative Lactobacillus. Based on the experimental data obtained using different homofermentative Lactobacillus, a prediction equation was established as follows: Xmax - X0 = (0.59 ± 0.02)·YX/P·C.
Hui Zhang; Oskar Wallmark
2017-01-01
This paper analyzes and compares models for predicting average magnet losses in interior permanent-magnet motors with fractional-slot concentrated windings due to harmonics in the armature reaction...
Environmental Risk Limits for several phosphate esters, with possible application as flame retardant
Verbruggen EMJ; Rila JP; Traas TP; Posthuma-Doodeman CJAM; Posthumus R; SEC
2006-01-01
Maximum Permissible Concentrations (MPC), Negligible Concentrations (NC) and Serious Risk Concentrations (SRCeco) are derived for a number of phosphate esters that are possibly used as flame retardant. These environmental risk limits were derived for the compartments water, soil, and sediment on bas
Zhang, Bingru; Kitzerow, Heinz-S
2016-03-31
Lyotropic chromonic liquid crystals have recently been suggested for use as a self-organized host for dispersing and aligning self-organized DNA origami nanostructures. However, an appropriate pH value and a suitable cation concentration are necessary to stabilize such nanostructures and to avoid unfolding of the DNA. The present study shows that the nematic and columnar liquid crystal phases appearing in aqueous solutions of disodium cromoglycate are robust against the replacement of deionized water by a neutral or alkaline buffer solution. However, disodium cromoglycate precipitates when an acidic buffer is used or when the concentration of magnesium cations exceeds a critical concentration of about 0.6-0.7 mmol/L.
Aldenberg T
1993-01-01
ETX (EcoToX) is a computer program for MS-DOS computers for the extrapolation of laboratory toxicity data to environmental concentrations that are safe for the majority of the biological species. It is based on the theory of Van Straalen and Denneman (1989), as modified by Aldenberg and Slob (1993).
Aldenberg T
1993-01-01
ETX (EcoToX) is a computer program for MS-DOS computers for the extrapolation of laboratory toxicity data to environmental concentrations that are safe for the majority of the biological species. It is based on the theory of Van Straalen and Denneman (1989), as modified by Aldenberg and Slob (1993)
This study assesses the ability of 21 crop models to capture the impact of elevated CO2 concentration ([CO218 ]) on maize yield and water use as measured in a 2-year Free Air Carbon dioxide Enrichment experiment conducted at the Thünen Institute in Braunschweig, Germany (Manderscheid et al. 2014). D...
Diapouli, Evangelia; Manousakas, Manousos I.; Vratolis, Stergios; Vasilatou, Vasiliki; Pateraki, Stella; Bairachtari, Kyriaki A.; Querol, Xavier; Amato, Fulvio; Alastuey, Andrés; Karanasiou, Angeliki A.; Lucarelli, Franco; Nava, Silvia; Calzolai, Giulia; Gianelle, Vorne L.; Colombi, Cristina; Alves, Célia; Custódio, Danilo; Pio, Casimiro; Spyrou, Christos; Kallos, George B.; Eleftheriadis, Konstantinos
2017-03-01
The contribution of natural sources to ambient air particulate matter (PM) concentrations is often not considered; however, it may be significant for certain areas and during specific periods of the year. In the framework of the AIRUSE-LIFE+ project, state-of-the-art methods have been employed for assessing the contribution of major natural sources (African dust, sea salt and forest fires) to PM concentrations, in southern European urban areas. 24 h measurements of PM10 and PM2. 5 mass and chemical composition were performed over the course of a year in five cities: Porto, Barcelona, Milan, Florence and Athens. Net African dust and sea-salt concentrations were calculated based on the methodologies proposed by the EC (SEC 2011/208). The contribution of uncontrolled forest fires was calculated through receptor modelling. Sensitivity analysis with respect to the calculation of African dust was also performed, in order to identify major parameters affecting the estimated net dust concentrations. African dust contribution to PM concentrations was more pronounced in the eastern Mediterranean, with the mean annual relative contribution to PM10 decreasing from 21 % in Athens, to 5 % in Florence, and around 2 % in Milan, Barcelona and Porto. The respective contribution to PM2. 5 was calculated equal to 14 % in Athens and from 1.3 to 2.4 % in all other cities. High seasonal variability of contributions was observed, with dust transport events occurring at different periods in the western and eastern Mediterranean basin. Sea salt was mostly related to the coarse mode and also exhibited significant seasonal variability. Sea-salt concentrations were highest in Porto, with average relative contributions equal to 12.3 % for PM10. Contributions from uncontrolled forest fires were quantified only for Porto and were low on an annual basis (1.4 and 1.9 % to PM10 and PM2. 5, respectively); nevertheless, contributions were greatly increased during events, reaching 20 and 22 % of 24 h
Maximum entropy analysis of cosmic ray composition
Nosek, Dalibor; Vícha, Jakub; Trávníček, Petr; Nosková, Jana
2016-01-01
We focus on the primary composition of cosmic rays with the highest energies that cause extensive air showers in the Earth's atmosphere. A way of examining the two lowest order moments of the sample distribution of the depth of shower maximum is presented. The aim is to show that useful information about the composition of the primary beam can be inferred with limited knowledge we have about processes underlying these observations. In order to describe how the moments of the depth of shower maximum depend on the type of primary particles and their energies, we utilize a superposition model. Using the principle of maximum entropy, we are able to determine what trends in the primary composition are consistent with the input data, while relying on a limited amount of information from shower physics. Some capabilities and limitations of the proposed method are discussed. In order to achieve a realistic description of the primary mass composition, we pay special attention to the choice of the parameters of the sup...
MacQueen, Rowan W.; Tayebjee, Murad J. Y.; Webb, James E. A.; Falber, Alexander; Thordarson, Pall; Schmidt, Timothy W.
2016-06-01
Luminescent solar concentrators (LSCs) use luminescence and waveguiding to concentrate photons within thin dielectric slabs for use in photovoltaic, lighting, and photobioreactor applications. Donor-acceptor systems of organic chromophores are widely used in LSCs to broaden the sunlight absorption range and attempt to reduce loss-inducing reabsorption by the emitting chromophore. We use raytrace simulations across a large parameter space to model the performance of LSCs containing two novel donor-acceptor trimers based on the perylene moiety. We find that under certain conditions, trimers outperform single-dye LSCs as expected. However, at higher concentrations, a slight increase in red-edge absorption by the trimers increases reabsorption and has a deleterious effect on LSC performance. This underscores the large effect that even small changes in the red edge can have, and may discourage the use of donor-acceptor schemes with high interchromophore coupling that promotes red-edge absorption. Finally, we show that for a LSC-PV pair, selecting a PV cell that is well-matched with the LSC emission spectrum has a large effect on the flux gain of the system, and that the systems studied here are well-matched to emerging PV technologies.
陈嘉; 李拥军; 杨文萍
2009-01-01
Objective To study the effects of carbon disulfide exposure within the national maximum allowable concentration(MAC) on blood pressure and electrocardiogram, and associations with selected factors. Methods Workers in a chemical fiber factory were divided into two groups based on the type of work: a high exposure group (HEG) of 821 individuals and a low exposure group (LEG) of 259. The CS_2 concentration at workplace was controlled under the national MAC. A set of 250 randomly selected people taking routine phys-ical check-ups in the same period and hospital constituted the control group. The systolic blood pressure (SBP) and diastolic hlood pressure (DBP) were measured on the arm, and the pulse pressure (PP) and mean arterial blood pressure (MABP) were calculated based on SBP and DBP. The blood pressure data, along with the results of the routine 12-lead electrocardiography taken at rest and records on gender, age, years of work, type of work, and concentrations of triglycerol, cholesterol, and glucose in blood, were compiled for analyses. Risk factors upon CS_2 exposure for the increase of blood pressure and occurrence of electrocardiogram abnor-malities were identified and rationalized. Results Significant difference (P<0.01) in the average values of SBP, DBP, MABP, and the corresponding abnormality incident rates was found between HEG and LEG, and between HEG and the control group. For both HEG and LEG, the incident rate of DBP abnormality(high DBP) is nearly two times as high as that of SBP. Type of work is the largest risk factor in both the high SBP and high DBP subgroups, with odds ratios (OR) of 2.086 and 2.331 respectively, and high CS_2 exposure presents more than double the risk than low exposure. On the incident rate of ECG abnormalities, beth exposure groups are significantly different (P<0.01) to the control group. High SBP in LEG and high DBP in HEG were found to be significant risk factors (OR = 3.531 and 1.638 respectively), while blood glucose
The Shockley-Queisser limit for nanostructured solar cells
Xu, Yunlu; Munday, Jeremy N
2014-01-01
The Shockley-Queisser limit describes the maximum solar energy conversion efficiency achievable for a particular material and is the standard by which new photovoltaic technologies are compared. This limit is based on the principle of detailed balance, which equates the photon flux into a device to the particle flux (photons or electrons) out of that device. Nanostructured solar cells represent a new class of photovoltaic devices, and questions have been raised about whether or not they can exceed the Shockley-Queisser limit. Here we show that single-junction nanostructured solar cells have a theoretical maximum efficiency of 42% under AM 1.5 solar illumination. While this exceeds the efficiency of a non- concentrating planar device, it does not exceed the Shockley-Queisser limit for a planar device with optical concentration. We conclude that nanostructured solar cells offer an important route towards higher efficiency photovoltaic devices through a built-in optical concentration.
Maximum margin Bayesian network classifiers.
Pernkopf, Franz; Wohlmayr, Michael; Tschiatschek, Sebastian
2012-03-01
We present a maximum margin parameter learning algorithm for Bayesian network classifiers using a conjugate gradient (CG) method for optimization. In contrast to previous approaches, we maintain the normalization constraints on the parameters of the Bayesian network during optimization, i.e., the probabilistic interpretation of the model is not lost. This enables us to handle missing features in discriminatively optimized Bayesian networks. In experiments, we compare the classification performance of maximum margin parameter learning to conditional likelihood and maximum likelihood learning approaches. Discriminative parameter learning significantly outperforms generative maximum likelihood estimation for naive Bayes and tree augmented naive Bayes structures on all considered data sets. Furthermore, maximizing the margin dominates the conditional likelihood approach in terms of classification performance in most cases. We provide results for a recently proposed maximum margin optimization approach based on convex relaxation. While the classification results are highly similar, our CG-based optimization is computationally up to orders of magnitude faster. Margin-optimized Bayesian network classifiers achieve classification performance comparable to support vector machines (SVMs) using fewer parameters. Moreover, we show that unanticipated missing feature values during classification can be easily processed by discriminatively optimized Bayesian network classifiers, a case where discriminative classifiers usually require mechanisms to complete unknown feature values in the data first.
Maximum Entropy in Drug Discovery
Chih-Yuan Tseng
2014-07-01
Full Text Available Drug discovery applies multidisciplinary approaches either experimentally, computationally or both ways to identify lead compounds to treat various diseases. While conventional approaches have yielded many US Food and Drug Administration (FDA-approved drugs, researchers continue investigating and designing better approaches to increase the success rate in the discovery process. In this article, we provide an overview of the current strategies and point out where and how the method of maximum entropy has been introduced in this area. The maximum entropy principle has its root in thermodynamics, yet since Jaynes’ pioneering work in the 1950s, the maximum entropy principle has not only been used as a physics law, but also as a reasoning tool that allows us to process information in hand with the least bias. Its applicability in various disciplines has been abundantly demonstrated. We give several examples of applications of maximum entropy in different stages of drug discovery. Finally, we discuss a promising new direction in drug discovery that is likely to hinge on the ways of utilizing maximum entropy.
Sharifi-Mood, Nima; Koplik, Joel; Maldarelli, Charles
2013-11-01
Chemical-mechanical transduction mechanisms which can actuate the movement of colloids through liquids are highly sought after as engines to propel miniaturized micro- and nanobots. One mechanism involves harnessing the long-range van der Waals attractive forces between the colloid and solute molecules dissolved in the liquid around the particle. If a concentration gradient of this solute is applied across the particle, then the imbalance in the van der Waals attraction drives the particle towards the higher concentration of solute. We present a molecular dynamics simulation using Lennard-Jones interactions between molecules of the solvent, solute, and colloid cluster which include short-range repulsive and long-range attractive potentials. The simulations demonstrate that a solute gradient can propel nanosized colloids, and that the velocity decreases with the colloid size. The solute-colloid short-range repulsive interactions are observed to be restricted to a region of specifically adsorbed solutes on the particle surface which are symmetrically adsorbed and do not contribute to the motion. The size of this region provides a cutoff for a continuum level description of the motion, and with this cutoff, continuum calculations are in excellent agreement with the molecular dynamics simulation results, completing a description of the propulsion from the nano- to the microscale.
Sharifi-Mood, Nima; Koplik, Joel; Maldarelli, Charles
2013-11-01
Chemical-mechanical transduction mechanisms which can actuate the movement of colloids through liquids are highly sought after as engines to propel miniaturized micro- and nanobots. One mechanism involves harnessing the long-range van der Waals attractive forces between the colloid and solute molecules dissolved in the liquid around the particle. If a concentration gradient of this solute is applied across the particle, then the imbalance in the van der Waals attraction drives the particle towards the higher concentration of solute. We present a molecular dynamics simulation using Lennard-Jones interactions between molecules of the solvent, solute, and colloid cluster which include short-range repulsive and long-range attractive potentials. The simulations demonstrate that a solute gradient can propel nanosized colloids, and that the velocity decreases with the colloid size. The solute-colloid short-range repulsive interactions are observed to be restricted to a region of specifically adsorbed solutes on the particle surface which are symmetrically adsorbed and do not contribute to the motion. The size of this region provides a cutoff for a continuum level description of the motion, and with this cutoff, continuum calculations are in excellent agreement with the molecular dynamics simulation results, completing a description of the propulsion from the nano- to the microscale.
5 CFR 838.711 - Maximum former spouse survivor annuity.
2010-01-01
... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Maximum former spouse survivor annuity... Orders Awarding Former Spouse Survivor Annuities Limitations on Survivor Annuities § 838.711 Maximum former spouse survivor annuity. (a) Under CSRS, payments under a court order may not exceed the...
16 CFR 1505.8 - Maximum acceptable material temperatures.
2010-01-01
... Association, 155 East 44th Street, New York, NY 10017. Material Degrees C. Degrees F. Capacitors (1) (1) Class... capacitor has no marked temperature limit, the maximum acceptable temperature will be assumed to be 65...
Greenslade, Thomas B., Jr.
1985-01-01
Discusses a series of experiments performed by Thomas Hope in 1805 which show the temperature at which water has its maximum density. Early data cast into a modern form as well as guidelines and recent data collected from the author provide background for duplicating Hope's experiments in the classroom. (JN)
Molnary, Leslie de [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)]. E-mail: molnaryy@net.ipen.br
2002-07-01
A two layer bulk model is used to simulate numerically the time and spatial evolution of concentration of radionuclides in the Planetary Boundary Layer (PBL) for convective and stable conditions. In this model, the closure hypothesis are based on the integrated version of the Turbulent Kinetics Energy equation. This type of model was adopted here because it is numerically simple to be applied operationally in routine and emergency support systems of atmospheric releases at nuclear power plants, and the hypothesis of the efficiency of the vertical mixing seems to be physically reasonable to simulate PBL evolution for high wind conditions and stable conditions in subtropical latitudes regions. In order to validate the model, numerical simulations were carried out with initial and boundary conditions based on vertical profiles of temperatures and horizontal wind speed and direction obtained from tethered balloon soundings, synoptic charts at 850 hPa and surface observations. Comparisons between a 24 hour long numerical simulation and observations indicate that the model is capable of reproduce the diurnal evolution of temperature and horizontal wind during the convective regime. During stable conditions, the slab model was able to simulate the intensity of the surface inversion as a difference between the mixed layer and the surface temperature. The simulated mixed layer height matches with observations during the convective and stable regime. (author)
COMPARISON BETWEEN FORMULAS OF MAXIMUM SHIP SQUAT
PETRU SERGIU SERBAN
2016-06-01
Full Text Available Ship squat is a combined effect of ship’s draft and trim increase due to ship motion in limited navigation conditions. Over time, researchers conducted tests on models and ships to find a mathematical formula that can define squat. Various forms of calculating squat can be found in the literature. Among those most commonly used are of Barrass, Millward, Eryuzlu or ICORELS. This paper presents a comparison between the squat formulas to see the differences between them and which one provides the most satisfactory results. In this respect a cargo ship at different speeds was considered as a model for maximum squat calculations in canal navigation conditions.
Lötsch, Jörn; Ultsch, Alfred
2016-01-01
Specialization is ubiquitous in biological systems and its manifold mechanisms are active research topics. Although clearly adaptive, the way in which specialization of cells is realized remains incompletely understood as it requires the reshaping of a cell's genome to favor particular biological processes in the competition on a cell's functional capacity. Here, a self-specialization mechanism is identified as a possible biological role of jumping genes, in particular LINE-1 retrotransposition. The mechanism is self-limiting and consistent with its evolutionary preservation despite its likely gene-breaking effects. The scenario we studied was the need for a cell to process a longer exposition to an extraordinary situation, for example continuous exposure to the nociceptive input or the intake of addictive drugs. Both situations may evolve toward chronification. The mechanism involves competition within a gene set in which a subset of genes cooperating in particular biological processes. The subset carries a piece of information, consisting of the LINE-1 sequence, about the destruction of their functional competitor genes which are not involved in that process. During gene transcription, an active copy of LINE-1 is co-transcribed. At a certain low probability, a subsequently transcribed and thus actually exposed gene can be rendered nonfunctional by LINE-1 retrotransposition in a relevant gene part. As retrotransposition needs time it is unlikely that LINE-1 retrotranspose into its own carrier gene. This reshapes the cell genome toward self-specializing of those biological processes that are carried out with a high number of LINE-1 containing genes. Self-termination of the mechanism is achieved by allowing LINE-1 to also occasionally jump into the coding region of itself, thus destroying the information about competitor destruction by successively decreasing the number of LINE-1 until the mechanism ceases. Employing a computational functional genomics approach, we
Maximum Genus of Strong Embeddings
Er-ling Wei; Yan-pei Liu; Han Ren
2003-01-01
The strong embedding conjecture states that any 2-connected graph has a strong embedding on some surface. It implies the circuit double cover conjecture: Any 2-connected graph has a circuit double cover.Conversely, it is not true. But for a 3-regular graph, the two conjectures are equivalent. In this paper, a characterization of graphs having a strong embedding with exactly 3 faces, which is the strong embedding of maximum genus, is given. In addition, some graphs with the property are provided. More generally, an upper bound of the maximum genus of strong embeddings of a graph is presented too. Lastly, it is shown that the interpolation theorem is true to planar Halin graph.
Remizov, Ivan D
2009-01-01
In this note, we represent a subdifferential of a maximum functional defined on the space of all real-valued continuous functions on a given metric compact set. For a given argument, $f$ it coincides with the set of all probability measures on the set of points maximizing $f$ on the initial compact set. This complete characterization lies in the heart of several important identities in microeconomics, such as Roy's identity, Sheppard's lemma, as well as duality theory in production and linear programming.
Alternative Multiview Maximum Entropy Discrimination.
Chao, Guoqing; Sun, Shiliang
2016-07-01
Maximum entropy discrimination (MED) is a general framework for discriminative estimation based on maximum entropy and maximum margin principles, and can produce hard-margin support vector machines under some assumptions. Recently, the multiview version of MED multiview MED (MVMED) was proposed. In this paper, we try to explore a more natural MVMED framework by assuming two separate distributions p1( Θ1) over the first-view classifier parameter Θ1 and p2( Θ2) over the second-view classifier parameter Θ2 . We name the new MVMED framework as alternative MVMED (AMVMED), which enforces the posteriors of two view margins to be equal. The proposed AMVMED is more flexible than the existing MVMED, because compared with MVMED, which optimizes one relative entropy, AMVMED assigns one relative entropy term to each of the two views, thus incorporating a tradeoff between the two views. We give the detailed solving procedure, which can be divided into two steps. The first step is solving our optimization problem without considering the equal margin posteriors from two views, and then, in the second step, we consider the equal posteriors. Experimental results on multiple real-world data sets verify the effectiveness of the AMVMED, and comparisons with MVMED are also reported.
Automatic maximum entropy spectral reconstruction in NMR.
Mobli, Mehdi; Maciejewski, Mark W; Gryk, Michael R; Hoch, Jeffrey C
2007-10-01
Developments in superconducting magnets, cryogenic probes, isotope labeling strategies, and sophisticated pulse sequences together have enabled the application, in principle, of high-resolution NMR spectroscopy to biomolecular systems approaching 1 megadalton. In practice, however, conventional approaches to NMR that utilize the fast Fourier transform, which require data collected at uniform time intervals, result in prohibitively lengthy data collection times in order to achieve the full resolution afforded by high field magnets. A variety of approaches that involve nonuniform sampling have been proposed, each utilizing a non-Fourier method of spectrum analysis. A very general non-Fourier method that is capable of utilizing data collected using any of the proposed nonuniform sampling strategies is maximum entropy reconstruction. A limiting factor in the adoption of maximum entropy reconstruction in NMR has been the need to specify non-intuitive parameters. Here we describe a fully automated system for maximum entropy reconstruction that requires no user-specified parameters. A web-accessible script generator provides the user interface to the system.
Maximum Spectral Luminous Efficacy of White Light
Murphy, T W
2013-01-01
As lighting efficiency improves, it is useful to understand the theoretical limits to luminous efficacy for light that we perceive as white. Independent of the efficiency with which photons are generated, there exists a spectrally-imposed limit to the luminous efficacy of any source of photons. We find that, depending on the acceptable bandpass and---to a lesser extent---the color temperature of the light, the ideal white light source achieves a spectral luminous efficacy of 250--370 lm/W. This is consistent with previous calculations, but here we explore the maximum luminous efficacy as a function of photopic sensitivity threshold, color temperature, and color rendering index; deriving peak performance as a function of all three parameters. We also present example experimental spectra from a variety of light sources, quantifying the intrinsic efficacy of their spectral distributions.
Cacti with maximum Kirchhoff index
Wang, Wen-Rui; Pan, Xiang-Feng
2015-01-01
The concept of resistance distance was first proposed by Klein and Randi\\'c. The Kirchhoff index $Kf(G)$ of a graph $G$ is the sum of resistance distance between all pairs of vertices in $G$. A connected graph $G$ is called a cactus if each block of $G$ is either an edge or a cycle. Let $Cat(n;t)$ be the set of connected cacti possessing $n$ vertices and $t$ cycles, where $0\\leq t \\leq \\lfloor\\frac{n-1}{2}\\rfloor$. In this paper, the maximum kirchhoff index of cacti are characterized, as well...
Generic maximum likely scale selection
Pedersen, Kim Steenstrup; Loog, Marco; Markussen, Bo
2007-01-01
The fundamental problem of local scale selection is addressed by means of a novel principle, which is based on maximum likelihood estimation. The principle is generally applicable to a broad variety of image models and descriptors, and provides a generic scale estimation methodology. The focus...... on second order moments of multiple measurements outputs at a fixed location. These measurements, which reflect local image structure, consist in the cases considered here of Gaussian derivatives taken at several scales and/or having different derivative orders....
24 CFR 941.306 - Maximum project cost.
2010-04-01
...) project costs that are subject to the TDC limit (i.e., Housing Construction Costs and Community Renewal Costs); and (2) project costs that are not subject to the TDC limit (i.e., Additional Project Costs... expended for the project, and this becomes the maximum project cost for purposes of the ACC. (b) TDC...
Maximum Permissible Concentrations and Negligible Concentrations for Rare Earth Elements (REEs)
Sneller FEC; Kalf DF; Weltje L; Wezel AP van; CSR
2000-01-01
In dit rapport worden maximaal toelaatbare risiconiveaus (MTR) en verwaarloosbare risiconiveaus (VR) afgeleid voor zeldzame aardmetalen (ZAM). De geselecteerde ZAMs zijn Yttrium (Y), Lanthanum (La), Cerium (Ce), Praseodymium (Pr), Neodymium (Nd), Samarium (Sm), Gadolinium (Gd), en Dysprosium (Dy
Wezel AP van; Vlaardingen P van; CSR
2001-01-01
In dit rapport zijn maximaal toelaatbare concentratie's en verwaarloosbare concentratie's afgeleid voor diverse aangroeiwerende middelen, welke worden gebruikt als vervanger voor TBT zoals Irgarol 1051, dichlofluanide, ziram, chloorthalonil en TCMTB.
Fundamental Limits to Cellular Sensing
ten Wolde, Pieter Rein; Becker, Nils B.; Ouldridge, Thomas E.; Mugler, Andrew
2016-03-01
In recent years experiments have demonstrated that living cells can measure low chemical concentrations with high precision, and much progress has been made in understanding what sets the fundamental limit to the precision of chemical sensing. Chemical concentration measurements start with the binding of ligand molecules to receptor proteins, which is an inherently noisy process, especially at low concentrations. The signaling networks that transmit the information on the ligand concentration from the receptors into the cell have to filter this receptor input noise as much as possible. These networks, however, are also intrinsically stochastic in nature, which means that they will also add noise to the transmitted signal. In this review, we will first discuss how the diffusive transport and binding of ligand to the receptor sets the receptor correlation time, which is the timescale over which fluctuations in the state of the receptor, arising from the stochastic receptor-ligand binding, decay. We then describe how downstream signaling pathways integrate these receptor-state fluctuations, and how the number of receptors, the receptor correlation time, and the effective integration time set by the downstream network, together impose a fundamental limit on the precision of sensing. We then discuss how cells can remove the receptor input noise while simultaneously suppressing the intrinsic noise in the signaling network. We describe why this mechanism of time integration requires three classes (groups) of resources—receptors and their integration time, readout molecules, energy—and how each resource class sets a fundamental sensing limit. We also briefly discuss the scheme of maximum-likelihood estimation, the role of receptor cooperativity, and how cellular copy protocols differ from canonical copy protocols typically considered in the computational literature, explaining why cellular sensing systems can never reach the Landauer limit on the optimal trade
Reis, Lindomar Augusto dos; Rocha, Marcia Silva da; Mesko, Marcia Foster; Silva, Fagner Francisco da; Quaresma, Maria Cristina Baptista; Araujo, Thiago Oliveira [Instituto Nacional de Metrologia, Normalizacao e Qualidade Industrial (DIMCI/INMETRO), Duque de Caxias, RJ (Brazil). Diretoria de Metrologia Cientifica e Industrial], E-mail: lareis@inmetro.gov.br
2009-07-01
This work aiming to obtain the first certified reference material for fuel anhydro ethylic alcohol relative to the copper concentration, which has his maximum limit determined by the in force legislation providing traceability and reliability for the measurement results.
Objects of maximum electromagnetic chirality
Fernandez-Corbaton, Ivan
2015-01-01
We introduce a definition of the electromagnetic chirality of an object and show that it has an upper bound. The upper bound is attained if and only if the object is transparent for fields of one handedness (helicity). Additionally, electromagnetic duality symmetry, i.e. helicity preservation upon scattering, turns out to be a necessary condition for reciprocal scatterers to attain the upper bound. We use these results to provide requirements for the design of such extremal scatterers. The requirements can be formulated as constraints on the polarizability tensors for dipolar scatterers or as material constitutive relations. We also outline two applications for objects of maximum electromagnetic chirality: A twofold resonantly enhanced and background free circular dichroism measurement setup, and angle independent helicity filtering glasses.
Maximum mutual information regularized classification
Wang, Jim Jing-Yan
2014-09-07
In this paper, a novel pattern classification approach is proposed by regularizing the classifier learning to maximize mutual information between the classification response and the true class label. We argue that, with the learned classifier, the uncertainty of the true class label of a data sample should be reduced by knowing its classification response as much as possible. The reduced uncertainty is measured by the mutual information between the classification response and the true class label. To this end, when learning a linear classifier, we propose to maximize the mutual information between classification responses and true class labels of training samples, besides minimizing the classification error and reducing the classifier complexity. An objective function is constructed by modeling mutual information with entropy estimation, and it is optimized by a gradient descend method in an iterative algorithm. Experiments on two real world pattern classification problems show the significant improvements achieved by maximum mutual information regularization.
The strong maximum principle revisited
Pucci, Patrizia; Serrin, James
In this paper we first present the classical maximum principle due to E. Hopf, together with an extended commentary and discussion of Hopf's paper. We emphasize the comparison technique invented by Hopf to prove this principle, which has since become a main mathematical tool for the study of second order elliptic partial differential equations and has generated an enormous number of important applications. While Hopf's principle is generally understood to apply to linear equations, it is in fact also crucial in nonlinear theories, such as those under consideration here. In particular, we shall treat and discuss recent generalizations of the strong maximum principle, and also the compact support principle, for the case of singular quasilinear elliptic differential inequalities, under generally weak assumptions on the quasilinear operators and the nonlinearities involved. Our principal interest is in necessary and sufficient conditions for the validity of both principles; in exposing and simplifying earlier proofs of corresponding results; and in extending the conclusions to wider classes of singular operators than previously considered. The results have unexpected ramifications for other problems, as will develop from the exposition, e.g. two point boundary value problems for singular quasilinear ordinary differential equations (Sections 3 and 4); the exterior Dirichlet boundary value problem (Section 5); the existence of dead cores and compact support solutions, i.e. dead cores at infinity (Section 7); Euler-Lagrange inequalities on a Riemannian manifold (Section 9); comparison and uniqueness theorems for solutions of singular quasilinear differential inequalities (Section 10). The case of p-regular elliptic inequalities is briefly considered in Section 11.
Piepel, G. F. [Applied Statistics and Computational Sciences, Pacific Northwest National Laboratory, Richland WA USA; Deatherage Kaiser, B. L. [Chemical and Biological Signature Science Group, Pacific Northwest National Laboratory, Richland WA USA; Amidan, B. G. [Applied Statistics and Computational Sciences, Pacific Northwest National Laboratory, Richland WA USA; Sydor, M. A. [Chemical and Biological Signature Science Group, Pacific Northwest National Laboratory, Richland WA USA; Barrett, C. A. [Analytical Chemistry of Nuclear Materials, Pacific Northwest National Laboratory, Richland WA USA; Hutchison, J. R. [Chemical and Biological Signature Science Group, Pacific Northwest National Laboratory, Richland WA USA
2016-05-06
The performance of a macrofoam-swab sampling method was evaluated using Bacillus anthracis Sterne (BAS) and Bacillus atrophaeus Nakamura (BG) spores applied at nine low target amounts (2-500 spores) to positive-control plates and test coupons (2 in × 2 in) of four surface materials (glass, stainless steel, vinyl tile, and plastic). Test results from cultured samples were used to evaluate the effects of surrogate, surface concentration, and surface material on recovery efficiency (RE), false negative rate (FNR), and limit of detection. For RE, surrogate and surface material had statistically significant effects, but concentration did not. Mean REs were the lowest for vinyl tile (50.8% with BAS and 40.2% with BG) and the highest for glass (92.8% with BAS and 71.4% with BG). FNR values ranged from 0 to 0.833 for BAS and 0 to 0.806 for BG; values increased as concentration decreased in the range tested (0.078 to 19.375 CFU/cm2). Surface material also had a statistically significant effect. A FNR-concentration curve was fit for each combination of surrogate and surface material. For both surrogates, the FNR curves tended to be the lowest for glass and highest for vinyl title. The FNR curves for BG tended to be higher than for BAS at lower concentrations, especially for glass. Results using a modified Rapid Viability-Polymerase Chain Reaction (mRV-PCR) analysis method were also obtained. The mRV-PCR results and comparisons to the culture results will be discussed in a subsequent article.
Efficiency at Maximum Power of Interacting Molecular Machines
Golubeva, Natalia; Imparato, Alberto
2012-01-01
We investigate the efficiency of systems of molecular motors operating at maximum power. We consider two models of kinesin motors on a microtubule: for both the simplified and the detailed model, we find that the many-body exclusion effect enhances the efficiency at maximum power of the many- motor...... system, with respect to the single motor case. Remarkably, we find that this effect occurs in a limited region of the system parameters, compatible with the biologically relevant range....
NONE
2000-07-01
The guide sets out the mathematical definitions and principles involved in the calculation of the equivalent dose and the effective dose, and the instructions concerning the application of the maximum values of these quantities. further, for monitoring the dose caused by internal radiation, the guide defines the limits derived from annual dose limits (the Annual Limit on Intake and the Derived Air Concentration). Finally, the guide defines the operational quantities to be used in estimating the equivalent dose and the effective dose, and also sets out the definitions of some other quantities and concepts to be used in monitoring radiation exposure. The guide does not include the calculation of patient doses carried out for the purposes of quality assurance.
Maximum frequency of the decametric radiation from Jupiter
Barrow, C. H.; Alexander, J. K.
1980-01-01
The upper frequency limits of Jupiter's decametric radio emission are found to be essentially the same when observed from the earth or, with considerably higher sensitivity, from the Voyager spacecraft close to Jupiter. This suggests that the maximum frequency is a real cut-off corresponding to a maximum gyrofrequency of about 38-40 MHz at Jupiter. It no longer appears to be necessary to specify different cut-off frequencies for the Io and non-Io emission as the maximum frequencies are roughly the same in each case.
Maximum entropy production in daisyworld
Maunu, Haley A.; Knuth, Kevin H.
2012-05-01
Daisyworld was first introduced in 1983 by Watson and Lovelock as a model that illustrates how life can influence a planet's climate. These models typically involve modeling a planetary surface on which black and white daisies can grow thus influencing the local surface albedo and therefore also the temperature distribution. Since then, variations of daisyworld have been applied to study problems ranging from ecological systems to global climate. Much of the interest in daisyworld models is due to the fact that they enable one to study self-regulating systems. These models are nonlinear, and as such they exhibit sensitive dependence on initial conditions, and depending on the specifics of the model they can also exhibit feedback loops, oscillations, and chaotic behavior. Many daisyworld models are thermodynamic in nature in that they rely on heat flux and temperature gradients. However, what is not well-known is whether, or even why, a daisyworld model might settle into a maximum entropy production (MEP) state. With the aim to better understand these systems, this paper will discuss what is known about the role of MEP in daisyworld models.
Maximum Matchings via Glauber Dynamics
Jindal, Anant; Pal, Manjish
2011-01-01
In this paper we study the classic problem of computing a maximum cardinality matching in general graphs $G = (V, E)$. The best known algorithm for this problem till date runs in $O(m \\sqrt{n})$ time due to Micali and Vazirani \\cite{MV80}. Even for general bipartite graphs this is the best known running time (the algorithm of Karp and Hopcroft \\cite{HK73} also achieves this bound). For regular bipartite graphs one can achieve an $O(m)$ time algorithm which, following a series of papers, has been recently improved to $O(n \\log n)$ by Goel, Kapralov and Khanna (STOC 2010) \\cite{GKK10}. In this paper we present a randomized algorithm based on the Markov Chain Monte Carlo paradigm which runs in $O(m \\log^2 n)$ time, thereby obtaining a significant improvement over \\cite{MV80}. We use a Markov chain similar to the \\emph{hard-core model} for Glauber Dynamics with \\emph{fugacity} parameter $\\lambda$, which is used to sample independent sets in a graph from the Gibbs Distribution \\cite{V99}, to design a faster algori...
2011-01-10
...: Establishing Maximum Allowable Operating Pressure or Maximum Operating Pressure Using Record Evidence, and... facilities of their responsibilities, under Federal integrity management (IM) regulations, to perform... system, especially when calculating Maximum Allowable Operating Pressure (MAOP) or Maximum Operating...
Dynamic Optimization of a Polymer Flooding Process Based on Implicit Discrete Maximum Principle
Yang Lei
2012-01-01
Full Text Available Polymer flooding is one of the most important technologies for enhanced oil recovery (EOR. In this paper, an optimal control model of distributed parameter systems (DPSs for polymer injection strategies is established, which involves the performance index as maximum of the profit, the governing equations as the fluid flow equations of polymer flooding, and some inequality constraints as polymer concentration and injection amount limitation. The optimal control model is discretized by full implicit finite-difference method. To cope with the discrete optimal control problem (OCP, the necessary conditions for optimality are obtained through application of the calculus of variations and Pontryagin’s discrete maximum principle. A modified gradient method with new adjoint construction is proposed for the computation of optimal injection strategies. The numerical results of an example illustrate the effectiveness of the proposed method.
The Sherpa Maximum Likelihood Estimator
Nguyen, D.; Doe, S.; Evans, I.; Hain, R.; Primini, F.
2011-07-01
A primary goal for the second release of the Chandra Source Catalog (CSC) is to include X-ray sources with as few as 5 photon counts detected in stacked observations of the same field, while maintaining acceptable detection efficiency and false source rates. Aggressive source detection methods will result in detection of many false positive source candidates. Candidate detections will then be sent to a new tool, the Maximum Likelihood Estimator (MLE), to evaluate the likelihood that a detection is a real source. MLE uses the Sherpa modeling and fitting engine to fit a model of a background and source to multiple overlapping candidate source regions. A background model is calculated by simultaneously fitting the observed photon flux in multiple background regions. This model is used to determine the quality of the fit statistic for a background-only hypothesis in the potential source region. The statistic for a background-plus-source hypothesis is calculated by adding a Gaussian source model convolved with the appropriate Chandra point spread function (PSF) and simultaneously fitting the observed photon flux in each observation in the stack. Since a candidate source may be located anywhere in the field of view of each stacked observation, a different PSF must be used for each observation because of the strong spatial dependence of the Chandra PSF. The likelihood of a valid source being detected is a function of the two statistics (for background alone, and for background-plus-source). The MLE tool is an extensible Python module with potential for use by the general Chandra user.
Vestige: Maximum likelihood phylogenetic footprinting
Maxwell Peter
2005-05-01
Full Text Available Abstract Background Phylogenetic footprinting is the identification of functional regions of DNA by their evolutionary conservation. This is achieved by comparing orthologous regions from multiple species and identifying the DNA regions that have diverged less than neutral DNA. Vestige is a phylogenetic footprinting package built on the PyEvolve toolkit that uses probabilistic molecular evolutionary modelling to represent aspects of sequence evolution, including the conventional divergence measure employed by other footprinting approaches. In addition to measuring the divergence, Vestige allows the expansion of the definition of a phylogenetic footprint to include variation in the distribution of any molecular evolutionary processes. This is achieved by displaying the distribution of model parameters that represent partitions of molecular evolutionary substitutions. Examination of the spatial incidence of these effects across regions of the genome can identify DNA segments that differ in the nature of the evolutionary process. Results Vestige was applied to a reference dataset of the SCL locus from four species and provided clear identification of the known conserved regions in this dataset. To demonstrate the flexibility to use diverse models of molecular evolution and dissect the nature of the evolutionary process Vestige was used to footprint the Ka/Ks ratio in primate BRCA1 with a codon model of evolution. Two regions of putative adaptive evolution were identified illustrating the ability of Vestige to represent the spatial distribution of distinct molecular evolutionary processes. Conclusion Vestige provides a flexible, open platform for phylogenetic footprinting. Underpinned by the PyEvolve toolkit, Vestige provides a framework for visualising the signatures of evolutionary processes across the genome of numerous organisms simultaneously. By exploiting the maximum-likelihood statistical framework, the complex interplay between mutational
Critical Concentration Ratio for Solar Thermoelectric Generators
ur Rehman, Naveed; Siddiqui, Mubashir Ali
2016-10-01
A correlation for determining the critical concentration ratio (CCR) of solar concentrated thermoelectric generators (SCTEGs) has been established, and the significance of the contributing parameters is discussed in detail. For any SCTEG, higher concentration ratio leads to higher temperatures at the hot side of modules. However, the maximum value of this temperature for safe operation is limited by the material properties of the modules and should be considered as an important design constraint. Taking into account this limitation, the CCR can be defined as the maximum concentration ratio usable for a particular SCTEG. The established correlation is based on factors associated with the material and geometric properties of modules, thermal characteristics of the receiver, installation site attributes, and thermal and electrical operating conditions. To reduce the number of terms in the correlation, these factors are combined to form dimensionless groups by applying the Buckingham Pi theorem. A correlation model containing these groups is proposed and fit to a dataset obtained by simulating a thermodynamic (physical) model over sampled values acquired by applying the Latin hypercube sampling (LHS) technique over a realistic distribution of factors. The coefficient of determination and relative error are found to be 97% and ±20%, respectively. The correlation is validated by comparing the predicted results with literature values. In addition, the significance and effects of the Pi groups on the CCR are evaluated and thoroughly discussed. This study will lead to a wide range of opportunities regarding design and optimization of SCTEGs.
[Study on the maximum entropy principle and population genetic equilibrium].
Zhang, Hong-Li; Zhang, Hong-Yan
2006-03-01
A general mathematic model of population genetic equilibrium about one locus was constructed based on the maximum entropy principle by WANG Xiao-Long et al. They proved that the maximum solve of the model was just the frequency distribution that a population reached Hardy-Weinberg genetic equilibrium. It can suggest that a population reached Hardy-Weinberg genetic equilibrium when the genotype entropy of the population reached the maximal possible value, and that the frequency distribution of the maximum entropy was equivalent to the distribution of Hardy-Weinberg equilibrium law about one locus. They further assumed that the frequency distribution of the maximum entropy was equivalent to all genetic equilibrium distributions. This is incorrect, however. The frequency distribution of the maximum entropy was only equivalent to the distribution of Hardy-Weinberg equilibrium with respect to one locus or several limited loci. The case with regard to limited loci was proved in this paper. Finally we also discussed an example where the maximum entropy principle was not the equivalent of other genetic equilibria.
Kuracina Richard
2015-06-01
Full Text Available The article deals with the measurement of maximum explosion pressure and the maximum rate of exposure pressure rise of wood dust cloud. The measurements were carried out according to STN EN 14034-1+A1:2011 Determination of explosion characteristics of dust clouds. Part 1: Determination of the maximum explosion pressure pmax of dust clouds and the maximum rate of explosion pressure rise according to STN EN 14034-2+A1:2012 Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dtmax of dust clouds. The wood dust cloud in the chamber is achieved mechanically. The testing of explosions of wood dust clouds showed that the maximum value of the pressure was reached at the concentrations of 450 g / m3 and its value is 7.95 bar. The fastest increase of pressure was observed at the concentrations of 450 g / m3 and its value was 68 bar / s.
Combining Experiments and Simulations Using the Maximum Entropy Principle
Boomsma, Wouter; Ferkinghoff-Borg, Jesper; Lindorff-Larsen, Kresten
2014-01-01
are not in quantitative agreement with experimental data. The principle of maximum entropy is a general procedure for constructing probability distributions in the light of new data, making it a natural tool in cases when an initial model provides results that are at odds with experiments. The number of maximum entropy...... in the context of a simple example, after which we proceed with a real-world application in the field of molecular simulations, where the maximum entropy procedure has recently provided new insight. Given the limited accuracy of force fields, macromolecular simulations sometimes produce results....... Three very recent papers have explored this problem using the maximum entropy approach, providing both new theoretical and practical insights to the problem. We highlight each of these contributions in turn and conclude with a discussion on remaining challenges....
A probabilistic approach to the concept of Probable Maximum Precipitation
Papalexiou, S. M.; D. Koutsoyiannis
2006-01-01
International audience; The concept of Probable Maximum Precipitation (PMP) is based on the assumptions that (a) there exists an upper physical limit of the precipitation depth over a given area at a particular geographical location at a certain time of year, and (b) that this limit can be estimated based on deterministic considerations. The most representative and widespread estimation method of PMP is the so-called moisture maximization method. This method maximizes observed storms assuming...
The Maximum Patch Method for Directional Dark Matter Detection
Henderson, Shawn; Fisher, Peter
2008-01-01
Present and planned dark matter detection experiments search for WIMP-induced nuclear recoils in poorly known background conditions. In this environment, the maximum gap statistical method provides a way of setting more sensitive cross section upper limits by incorporating known signal information. We give a recipe for the numerical calculation of upper limits for planned directional dark matter detection experiments, that will measure both recoil energy and angle, based on the gaps between events in two-dimensional phase space.
Optimization of agitation and aeration conditions for maximum virginiamycin production.
Shioya, S; Morikawa, M; Kajihara, Y; Shimizu, H
1999-02-01
To maximize the productivity of virginiamycin, which is a commercially important antibiotic as an animal feed additive, an empirical approach was employed in the batch culture of Streptomyces virginiae. Here, the effects of dissolved oxygen (DO) concentration and agitation speed on the maximum cell concentration at the production phase, as well as on the productivity of virginiamycin, were investigated. To maintain the DO concentration in the fermentor at a certain level, either the agitation speed or the inlet oxygen concentration of the supply gas was manipulated. It was found that increasing the agitation speed had a positive effect on the antibiotic productivity independent of the DO concentration. The optimum DO concentration, agitation speed and addition of an autoregulator, virginiae butanolide C (VB-C), were determined to maximize virginiamycin productivity. The optimal strategy was to start the cultivation at 450 rpm and to continue until the DO concentration reached 80%. After reaching 80%, the DO concentration was maintained at this level by changing the agitation speed, up to a maximum of 800 rpm. The addition of an optimal amount of the autoregulator VB-C in an experiment resulted in the maximal production of virginiamycin M (399 mg/l), which was about 1.8-fold those obtained previously.
Quantum-dot Carnot engine at maximum power.
Esposito, Massimiliano; Kawai, Ryoichi; Lindenberg, Katja; Van den Broeck, Christian
2010-04-01
We evaluate the efficiency at maximum power of a quantum-dot Carnot heat engine. The universal values of the coefficients at the linear and quadratic order in the temperature gradient are reproduced. Curzon-Ahlborn efficiency is recovered in the limit of weak dissipation.
33 CFR 401.3 - Maximum vessel dimensions.
2010-07-01
..., and having dimensions that do not exceed the limits set out in the block diagram in appendix I of this... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Maximum vessel dimensions. 401.3 Section 401.3 Navigation and Navigable Waters SAINT LAWRENCE SEAWAY DEVELOPMENT CORPORATION, DEPARTMENT...
Receiver function estimated by maximum entropy deconvolution
吴庆举; 田小波; 张乃铃; 李卫平; 曾融生
2003-01-01
Maximum entropy deconvolution is presented to estimate receiver function, with the maximum entropy as the rule to determine auto-correlation and cross-correlation functions. The Toeplitz equation and Levinson algorithm are used to calculate the iterative formula of error-predicting filter, and receiver function is then estimated. During extrapolation, reflective coefficient is always less than 1, which keeps maximum entropy deconvolution stable. The maximum entropy of the data outside window increases the resolution of receiver function. Both synthetic and real seismograms show that maximum entropy deconvolution is an effective method to measure receiver function in time-domain.
Maximum Power from a Solar Panel
Michael Miller
2010-01-01
Full Text Available Solar energy has become a promising alternative to conventional fossil fuel sources. Solar panels are used to collect solar radiation and convert it into electricity. One of the techniques used to maximize the effectiveness of this energy alternative is to maximize the power output of the solar collector. In this project the maximum power is calculated by determining the voltage and the current of maximum power. These quantities are determined by finding the maximum value for the equation for power using differentiation. After the maximum values are found for each time of day, each individual quantity, voltage of maximum power, current of maximum power, and maximum power is plotted as a function of the time of day.
47 CFR 90.1215 - Power limits.
2010-10-01
... 47 Telecommunication 5 2010-10-01 2010-10-01 false Power limits. 90.1215 Section 90.1215... § 90.1215 Power limits. The transmitting power of stations operating in the 4940-4990 MHz band must not exceed the maximum limits in this section. (a)(1) The maximum conducted output power should not...
The generalized Shockley-Queisser limit for nanostructured solar cells
Xu, Yunlu; Gong, Tao; Munday, Jeremy N.
2015-09-01
The Shockley-Queisser limit describes the maximum solar energy conversion efficiency achievable for a particular material and is the standard by which new photovoltaic technologies are compared. This limit is based on the principle of detailed balance, which equates the photon flux into a device to the particle flux (photons or electrons) out of that device. Nanostructured solar cells represent a novel class of photovoltaic devices, and questions have been raised about whether or not they can exceed the Shockley-Queisser limit. Here we show that single-junction nanostructured solar cells have a theoretical maximum efficiency of ˜42% under AM 1.5 solar illumination. While this exceeds the efficiency of a non-concentrating planar device, it does not exceed the Shockley-Queisser limit for a planar device with optical concentration. We consider the effect of diffuse illumination and find that with optical concentration from the nanostructures of only × 1,000, an efficiency of 35.5% is achievable even with 25% diffuse illumination. We conclude that nanostructured solar cells offer an important route towards higher efficiency photovoltaic devices through a built-in optical concentration.
Microcanonical origin of the maximum entropy principle for open systems.
Lee, Julian; Pressé, Steve
2012-10-01
There are two distinct approaches for deriving the canonical ensemble. The canonical ensemble either follows as a special limit of the microcanonical ensemble or alternatively follows from the maximum entropy principle. We show the equivalence of these two approaches by applying the maximum entropy formulation to a closed universe consisting of an open system plus bath. We show that the target function for deriving the canonical distribution emerges as a natural consequence of partial maximization of the entropy over the bath degrees of freedom alone. By extending this mathematical formalism to dynamical paths rather than equilibrium ensembles, the result provides an alternative justification for the principle of path entropy maximization as well.
The inverse maximum dynamic flow problem
BAGHERIAN; Mehri
2010-01-01
We consider the inverse maximum dynamic flow (IMDF) problem.IMDF problem can be described as: how to change the capacity vector of a dynamic network as little as possible so that a given feasible dynamic flow becomes a maximum dynamic flow.After discussing some characteristics of this problem,it is converted to a constrained minimum dynamic cut problem.Then an efficient algorithm which uses two maximum dynamic flow algorithms is proposed to solve the problem.
Gale, Robert W.
2007-01-01
The Commonwealth of Virginia Department of Environmental Quality, working closely with the State of West Virginia Department of Environmental Protection and the U.S. Environmental Protection Agency is undertaking a polychlorinated biphenyl source assessment study for the Bluestone River watershed. The study area extends from the Bluefield area of Virginia and West Virginia, targets the Bluestone River and tributaries suspected of contributing to polychlorinated biphenyl, polychlorinated dibenzo-p-dioxin and dibenzofuran contamination, and includes sites near confluences of Big Branch, Brush Fork, and Beaver Pond Creek. The objectives of this study were to gather information about the concentrations, patterns, and distribution of these contaminants at specific study sites to expand current knowledge about polychlorinated biphenyl impacts and to identify potential new sources of contamination. Semipermeable membrane devices were used to integratively accumulate the dissolved fraction of the contaminants at each site. Performance reference compounds were added prior to deployment and used to determine site-specific sampling rates, enabling estimations of time-weighted average water concentrations during the deployed period. Minimum estimated concentrations of polychlorinated biphenyl congeners in water were about 1 picogram per liter per congener, and total concentrations at study sites ranged from 130 to 18,000 picograms per liter. The lowest concentration was 130 picograms per liter, about threefold greater than total hypothetical concentrations from background levels in field blanks. Polychlorinated biphenyl concentrations in water fell into three groups of sites: low (130-350 picogram per liter); medium (640-3,500 picogram per liter; and high (11,000-18,000 picogram per liter). Concentrations at the high sites, Beacon Cave and Beaverpond Branch at the Resurgence, were about four- to sixfold higher than concentrations estimated for the medium group of sites
2013-01-01
A concentration device (2) for filter filtration concentration of particles (4) from a volume of a fluid (6). The concentration device (2) comprises a filter (8) configured to filter particles (4) of a predefined size in the volume of the fluid (6). The concentration device (2) comprises...
Explicit Bounds for Entropy Concentration under Linear Constraints
Oikonomou, Kostas N
2011-01-01
Consider the construction of an object composed of $m$ parts by distributing $n$ units to those parts. For example, say we are assigning $n$ balls to $m$ boxes. Each assignment results in a certain count vector, specifying the number of balls allocated to each box. If only assignments satisfying a set of constraints that are linear in these counts are allowable, and $m$ is fixed while $n$ increases, most assignments that satisfy the constraints result in frequency vectors (normalized counts) whose entropy approaches that of the maximum entropy vector satisfying the constraints. This phenomenon of "entropy concentration" is known in various forms, and is one of the justifications of the maximum entropy method, one of the most powerful tools for solving problems with incomplete information. The appeal of entropy concentration comes from the simplicity of the argument: it is based purely on counting. Existing proofs of the concentration phenomenon are based on limits or asymptotics. Here we present non-asymptoti...
Spatio-temporal observations of tertiary ozone maximum
V. F. Sofieva
2009-03-01
Full Text Available We present spatio-temporal distributions of tertiary ozone maximum (TOM, based on GOMOS (Global Ozone Monitoring by Occultation of Stars ozone measurements in 2002–2006. The tertiary ozone maximum is typically observed in the high-latitude winter mesosphere at altitude ~72 km. Although the explanation for this phenomenon has been found recently – low concentrations of odd-hydrogen cause the subsequent decrease in odd-oxygen losses – models have had significant deviations from existing observations until recently. Good coverage of polar night regions by GOMOS data has allowed for the first time obtaining spatial and temporal observational distributions of night-time ozone mixing ratio in the mesosphere.
The distributions obtained from GOMOS data have specific features, which are variable from year to year. In particular, due to a long lifetime of ozone in polar night conditions, the downward transport of polar air by the meridional circulation is clearly observed in the tertiary ozone maximum time series. Although the maximum tertiary ozone mixing ratio is achieved close to the polar night terminator (as predicted by the theory, TOM can be observed also at very high latitudes, not only in the beginning and at the end, but also in the middle of winter. We have compared the observational spatio-temporal distributions of tertiary ozone maximum with that obtained using WACCM (Whole Atmosphere Community Climate Model and found that the specific features are reproduced satisfactorily by the model.
Since ozone in the mesosphere is very sensitive to HO_{x} concentrations, energetic particle precipitation can significantly modify the shape of the ozone profiles. In particular, GOMOS observations have shown that the tertiary ozone maximum was temporarily destroyed during the January 2005 and December 2006 solar proton events as a result of the HO_{x} enhancement from the increased ionization.
Maximum power point tracking for optimizing energy harvesting process
Akbari, S.; Thang, P. C.; Veselov, D. S.
2016-10-01
There has been a growing interest in using energy harvesting techniques for powering wireless sensor networks. The reason for utilizing this technology can be explained by the sensors limited amount of operation time which results from the finite capacity of batteries and the need for having a stable power supply in some applications. Energy can be harvested from the sun, wind, vibration, heat, etc. It is reasonable to develop multisource energy harvesting platforms for increasing the amount of harvesting energy and to mitigate the issue concerning the intermittent nature of ambient sources. In the context of solar energy harvesting, it is possible to develop algorithms for finding the optimal operation point of solar panels at which maximum power is generated. These algorithms are known as maximum power point tracking techniques. In this article, we review the concept of maximum power point tracking and provide an overview of the research conducted in this area for wireless sensor networks applications.
The evolution of maximum body size of terrestrial mammals.
Smith, Felisa A; Boyer, Alison G; Brown, James H; Costa, Daniel P; Dayan, Tamar; Ernest, S K Morgan; Evans, Alistair R; Fortelius, Mikael; Gittleman, John L; Hamilton, Marcus J; Harding, Larisa E; Lintulaakso, Kari; Lyons, S Kathleen; McCain, Christy; Okie, Jordan G; Saarinen, Juha J; Sibly, Richard M; Stephens, Patrick R; Theodor, Jessica; Uhen, Mark D
2010-11-26
The extinction of dinosaurs at the Cretaceous/Paleogene (K/Pg) boundary was the seminal event that opened the door for the subsequent diversification of terrestrial mammals. Our compilation of maximum body size at the ordinal level by sub-epoch shows a near-exponential increase after the K/Pg. On each continent, the maximum size of mammals leveled off after 40 million years ago and thereafter remained approximately constant. There was remarkable congruence in the rate, trajectory, and upper limit across continents, orders, and trophic guilds, despite differences in geological and climatic history, turnover of lineages, and ecological variation. Our analysis suggests that although the primary driver for the evolution of giant mammals was diversification to fill ecological niches, environmental temperature and land area may have ultimately constrained the maximum size achieved.
Rose, Caspar
2014-01-01
, especially minority shareholders. Concentrated ownership is associated with benefits and costs. Concentrated ownership may reduce agency costs by increased monitoring of top management. However, concentrated ownership may also provide dominating owners with private benefits of control.......This entry summarizes the main theoretical contributions and empirical findings in relation to concentrated ownership from a law and economics perspective. The various forms of concentrated ownership are described as well as analyzed from the perspective of the legal protection of investors...
Generalised maximum entropy and heterogeneous technologies
Oude Lansink, A.G.J.M.
1999-01-01
Generalised maximum entropy methods are used to estimate a dual model of production on panel data of Dutch cash crop farms over the period 1970-1992. The generalised maximum entropy approach allows a coherent system of input demand and output supply equations to be estimated for each farm in the sam
The maximum rotation of a galactic disc
Bottema, R
1997-01-01
The observed stellar velocity dispersions of galactic discs show that the maximum rotation of a disc is on average 63% of the observed maximum rotation. This criterion can, however, not be applied to small or low surface brightness (LSB) galaxies because such systems show, in general, a continuously
Loescher, D.H. [Sandia National Labs., Albuquerque, NM (United States). Systems Surety Assessment Dept.; Noren, K. [Univ. of Idaho, Moscow, ID (United States). Dept. of Electrical Engineering
1996-09-01
The current that flows between the electrical test equipment and the nuclear explosive must be limited to safe levels during electrical tests conducted on nuclear explosives at the DOE Pantex facility. The safest way to limit the current is to use batteries that can provide only acceptably low current into a short circuit; unfortunately this is not always possible. When it is not possible, current limiters, along with other design features, are used to limit the current. Three types of current limiters, the fuse blower, the resistor limiter, and the MOSFET-pass-transistor limiters, are used extensively in Pantex test equipment. Detailed failure mode and effects analyses were conducted on these limiters. Two other types of limiters were also analyzed. It was found that there is no best type of limiter that should be used in all applications. The fuse blower has advantages when many circuits must be monitored, a low insertion voltage drop is important, and size and weight must be kept low. However, this limiter has many failure modes that can lead to the loss of over current protection. The resistor limiter is simple and inexpensive, but is normally usable only on circuits for which the nominal current is less than a few tens of milliamperes. The MOSFET limiter can be used on high current circuits, but it has a number of single point failure modes that can lead to a loss of protective action. Because bad component placement or poor wire routing can defeat any limiter, placement and routing must be designed carefully and documented thoroughly.
Duality of Maximum Entropy and Minimum Divergence
Shinto Eguchi
2014-06-01
Full Text Available We discuss a special class of generalized divergence measures by the use of generator functions. Any divergence measure in the class is separated into the difference between cross and diagonal entropy. The diagonal entropy measure in the class associates with a model of maximum entropy distributions; the divergence measure leads to statistical estimation via minimization, for arbitrarily giving a statistical model. The dualistic relationship between the maximum entropy model and the minimum divergence estimation is explored in the framework of information geometry. The model of maximum entropy distributions is characterized to be totally geodesic with respect to the linear connection associated with the divergence. A natural extension for the classical theory for the maximum likelihood method under the maximum entropy model in terms of the Boltzmann-Gibbs-Shannon entropy is given. We discuss the duality in detail for Tsallis entropy as a typical example.
Predicting species' maximum dispersal distances from simple plant traits.
Tamme, Riin; Götzenberger, Lars; Zobel, Martin; Bullock, James M; Hooftman, Danny A P; Kaasik, Ants; Pärtel, Meelis
2014-02-01
Many studies have shown plant species' dispersal distances to be strongly related to life-history traits, but how well different traits can predict dispersal distances is not yet known. We used cross-validation techniques and a global data set (576 plant species) to measure the predictive power of simple plant traits to estimate species' maximum dispersal distances. Including dispersal syndrome (wind, animal, ant, ballistic, and no special syndrome), growth form (tree, shrub, herb), seed mass, seed release height, and terminal velocity in different combinations as explanatory variables we constructed models to explain variation in measured maximum dispersal distances and evaluated their power to predict maximum dispersal distances. Predictions are more accurate, but also limited to a particular set of species, if data on more specific traits, such as terminal velocity, are available. The best model (R2 = 0.60) included dispersal syndrome, growth form, and terminal velocity as fixed effects. Reasonable predictions of maximum dispersal distance (R2 = 0.53) are also possible when using only the simplest and most commonly measured traits; dispersal syndrome and growth form together with species taxonomy data. We provide a function (dispeRsal) to be run in the software package R. This enables researchers to estimate maximum dispersal distances with confidence intervals for plant species using measured traits as predictors. Easily obtainable trait data, such as dispersal syndrome (inferred from seed morphology) and growth form, enable predictions to be made for a large number of species.
On some method of the space elevator maximum stress reduction
Ambartsumian S. A.
2007-03-01
Full Text Available The possibility of the realization and exploitation of the space elevator project is connected with a number of complicated problems. One of them are large elastic stresses arising in the space elevator ribbon body, which are considerably bigger that the limit of strength of modern materials. This note is devoted to the solution of problem of maximum stress reduction in the ribbon by the modification of the ribbon cross-section area.
Matić Vesna
2016-01-01
Full Text Available Concentration risk has been gaining a special dimension in the contemporary financial and economic environment. Financial institutions are exposed to this risk mainly in the field of lending, mostly through their credit activities and concentration of credit portfolios. This refers to the concentration of different exposures within a single risk category (credit risk, market risk, operational risk, liquidity risk.
Nielsen, Morten Ebbe Juul
2006-01-01
Article Concerning the prospect of a kind of limited neutrality in place of the standard liberal egalitarian "neutrality of justification."......Article Concerning the prospect of a kind of limited neutrality in place of the standard liberal egalitarian "neutrality of justification."...
Hendricks, Vincent Fella; Symons, John
2011-01-01
Skeptics argue that the acquisition of knowledge is impossible given the standing possibility of error. We present the limiting convergence strategy for responding to skepticism and discuss the relationship between conceivable error and an agent’s knowledge in the limit. We argue that the skeptic...
Nielsen, Morten Ebbe Juul
2006-01-01
Article Concerning the prospect of a kind of limited neutrality in place of the standard liberal egalitarian "neutrality of justification."......Article Concerning the prospect of a kind of limited neutrality in place of the standard liberal egalitarian "neutrality of justification."...
A dual method for maximum entropy restoration
Smith, C. B.
1979-01-01
A simple iterative dual algorithm for maximum entropy image restoration is presented. The dual algorithm involves fewer parameters than conventional minimization in the image space. Minicomputer test results for Fourier synthesis with inadequate phantom data are given.
Maximum Throughput in Multiple-Antenna Systems
Zamani, Mahdi
2012-01-01
The point-to-point multiple-antenna channel is investigated in uncorrelated block fading environment with Rayleigh distribution. The maximum throughput and maximum expected-rate of this channel are derived under the assumption that the transmitter is oblivious to the channel state information (CSI), however, the receiver has perfect CSI. First, we prove that in multiple-input single-output (MISO) channels, the optimum transmission strategy maximizing the throughput is to use all available antennas and perform equal power allocation with uncorrelated signals. Furthermore, to increase the expected-rate, multi-layer coding is applied. Analogously, we establish that sending uncorrelated signals and performing equal power allocation across all available antennas at each layer is optimum. A closed form expression for the maximum continuous-layer expected-rate of MISO channels is also obtained. Moreover, we investigate multiple-input multiple-output (MIMO) channels, and formulate the maximum throughput in the asympt...
Photoemission spectromicroscopy with MAXIMUM at Wisconsin
Ng, W.; Ray-Chaudhuri, A.K.; Cole, R.K.; Wallace, J.; Crossley, S.; Crossley, D.; Chen, G.; Green, M.; Guo, J.; Hansen, R.W.C.; Cerrina, F.; Margaritondo, G. (Dept. of Electrical Engineering, Dept. of Physics and Synchrotron Radiation Center, Univ. of Wisconsin, Madison (USA)); Underwood, J.H.; Korthright, J.; Perera, R.C.C. (Center for X-ray Optics, Accelerator and Fusion Research Div., Lawrence Berkeley Lab., CA (USA))
1990-06-01
We describe the development of the scanning photoemission spectromicroscope MAXIMUM at the Wisoncsin Synchrotron Radiation Center, which uses radiation from a 30-period undulator. The article includes a discussion of the first tests after the initial commissioning. (orig.).
Maximum-likelihood method in quantum estimation
Paris, M G A; Sacchi, M F
2001-01-01
The maximum-likelihood method for quantum estimation is reviewed and applied to the reconstruction of density matrix of spin and radiation as well as to the determination of several parameters of interest in quantum optics.
The maximum entropy technique. System's statistical description
Belashev, B Z
2002-01-01
The maximum entropy technique (MENT) is applied for searching the distribution functions of physical values. MENT takes into consideration the demand of maximum entropy, the characteristics of the system and the connection conditions, naturally. It is allowed to apply MENT for statistical description of closed and open systems. The examples in which MENT had been used for the description of the equilibrium and nonequilibrium states and the states far from the thermodynamical equilibrium are considered
19 CFR 114.23 - Maximum period.
2010-04-01
... 19 Customs Duties 1 2010-04-01 2010-04-01 false Maximum period. 114.23 Section 114.23 Customs... CARNETS Processing of Carnets § 114.23 Maximum period. (a) A.T.A. carnet. No A.T.A. carnet with a period of validity exceeding 1 year from date of issue shall be accepted. This period of validity cannot be...
Maximum-Likelihood Detection Of Noncoherent CPM
Divsalar, Dariush; Simon, Marvin K.
1993-01-01
Simplified detectors proposed for use in maximum-likelihood-sequence detection of symbols in alphabet of size M transmitted by uncoded, full-response continuous phase modulation over radio channel with additive white Gaussian noise. Structures of receivers derived from particular interpretation of maximum-likelihood metrics. Receivers include front ends, structures of which depends only on M, analogous to those in receivers of coherent CPM. Parts of receivers following front ends have structures, complexity of which would depend on N.
Least cost cusp concentrator design
Nanda, S.K.; Mullick, S.C.; Annamalai, M.; Iyer, M.V.; Nirmala, K.A.; Venkatesh, P.; Prasad, C.R.; Subramani, C.
1982-01-01
Cusp concentrators require larger reflector areas, but can be designed for larger acceptance angles, allowing large mirror tolerances. Design procedures are outlined to compute the optimum combination of acceptance angle and maximum mirror slope for any required concentration ratio, taking into account the material as well as fabrication costs. The cusps are compared with the parabola.
SEXUAL DIMORPHISM OF MAXIMUM FEMORAL LENGTH
Pandya A M
2011-04-01
Full Text Available Sexual identification from the skeletal parts has medico legal and anthropological importance. Present study aims to obtain values of maximum femoral length and to evaluate its possible usefulness in determining correct sexual identification. Study sample consisted of 184 dry, normal, adult, human femora (136 male & 48 female from skeletal collections of Anatomy department, M. P. Shah Medical College, Jamnagar, Gujarat. Maximum length of femur was considered as maximum vertical distance between upper end of head of femur and the lowest point on femoral condyle, measured with the osteometric board. Mean Values obtained were, 451.81 and 417.48 for right male and female, and 453.35 and 420.44 for left male and female respectively. Higher value in male was statistically highly significant (P< 0.001 on both sides. Demarking point (D.P. analysis of the data showed that right femora with maximum length more than 476.70 were definitely male and less than 379.99 were definitely female; while for left bones, femora with maximum length more than 484.49 were definitely male and less than 385.73 were definitely female. Maximum length identified 13.43% of right male femora, 4.35% of right female femora, 7.25% of left male femora and 8% of left female femora. [National J of Med Res 2011; 1(2.000: 67-70
Ingram, WT
2012-01-01
Inverse limits provide a powerful tool for constructing complicated spaces from simple ones. They also turn the study of a dynamical system consisting of a space and a self-map into a study of a (likely more complicated) space and a self-homeomorphism. In four chapters along with an appendix containing background material the authors develop the theory of inverse limits. The book begins with an introduction through inverse limits on [0,1] before moving to a general treatment of the subject. Special topics in continuum theory complete the book. Although it is not a book on dynamics, the influen
Ng, Pamela; Incekol, Diana; Lee, Roy; Paisley, Emma; Dara, Celina; Brandle, Ian; Kaufman, Marina; Chen, Christine; Trudel, Suzanne; Tiedemann, Rodger; Reece, Donna; Kukreti, Vishal
2015-08-01
Subcutaneous injection is now commonly used as a standard for bortezomib administration. The bortezomib (Velcade(®)) product monograph recommends that intravenous injections be prepared at a concentration of 1 mg/mL, while subcutaneous injections may be prepared at a concentration of 2.5 mg/mL. Many institutions and subcutaneous administration guidelines use 2 mL as the maximum volume for subcutaneous injection. Using 2 mL as the maximum volume for injection would mean that many patients receiving bortezomib will receive two injections during each visit with common dosing parameters. In this prospective study evaluating a change to subcutaneous administration, bortezomib 1 mg/mL was administered subcutaneously at a higher maximum of 3 mL per injection site. For 57 individual patients, 339 doses were administered. Skin reactions were noted in 42% with all reactions being Grade 1 or 2. Patients tolerated subcutaneous injections well and only four patients were switched back to intravenous route. This is the first time that subcutaneous bortezomib of a volume up to a maximum of 3 mL (bortezomib 3 mg) per injection site has been reported. This higher single dose is well tolerated with limited skin reactions, no significant hypotension and facilitates ease of administration with only 5 patients needing two injections per visit. If the maximum volume for injection was kept at 2 mL, a total of 46 patients would have received two injections per visit. © The Author(s) 2014.
丁小霞; 李培武; 周海燕; 白艺珍; 印南日
2011-01-01
2009-2010年对全国产后花生黄曲霉毒素污染进行了普查监测,根据检测结果,利用蒙特卡罗方法,开展了我国与国际食品法典委员会(CAC)、欧盟、日本、澳大利亚和新西兰等国际组织和主要贸易国不同花生黄曲霉毒素限量对我国人群直接食用产后花生的致癌风险和对产业影响的研究.结果表明,不同花生黄曲霉毒素限量标准对我国人群摄入产后花生导致的原发性肝细胞癌年发生率影响差异不显著,但对经济和产业造成的影响差异显著.研究结果为制定我国花生黄曲霉毒素限量标准以及促进花生生产、贸易提供技术参考.%Based on the survey of aflatoxins contamination in post - harvest peanut in China, the cancer risk of Chinese populations for direct consumption of peanuts was estimated under currently existing maximum levels (MLs) in China, CAC (Codex Alimentarius Commission), EU, Japan, Australia and New Zealand, and different scenarios were simulated by Monte Carlo method. The results implied that there were no significant differences in the yearly - incidence of primary hepatocellular carcinoma of Chinese populations under different MLs in peanut and peanut products, whereas significant differences were found for the influence of different MLs on economic interest and the development of peanut industry. This study provided a base for setting up the MLs standards of aflatoxins in China and classification of peanut products.
The maximum rotation of a galactic disc
Bottema, R
1997-01-01
The observed stellar velocity dispersions of galactic discs show that the maximum rotation of a disc is on average 63% of the observed maximum rotation. This criterion can, however, not be applied to small or low surface brightness (LSB) galaxies because such systems show, in general, a continuously rising rotation curve until the outermost measured radial position. That is why a general relation has been derived, giving the maximum rotation for a disc depending on the luminosity, surface brightness, and colour of the disc. As a physical basis of this relation serves an adopted fixed mass-to-light ratio as a function of colour. That functionality is consistent with results from population synthesis models and its absolute value is determined from the observed stellar velocity dispersions. The derived maximum disc rotation is compared with a number of observed maximum rotations, clearly demonstrating the need for appreciable amounts of dark matter in the disc region and even more so for LSB galaxies. Matters h...
Computing Rooted and Unrooted Maximum Consistent Supertrees
van Iersel, Leo
2009-01-01
A chief problem in phylogenetics and database theory is the computation of a maximum consistent tree from a set of rooted or unrooted trees. A standard input are triplets, rooted binary trees on three leaves, or quartets, unrooted binary trees on four leaves. We give exact algorithms constructing rooted and unrooted maximum consistent supertrees in time O(2^n n^5 m^2 log(m)) for a set of m triplets (quartets), each one distinctly leaf-labeled by some subset of n labels. The algorithms extend to weighted triplets (quartets). We further present fast exact algorithms for constructing rooted and unrooted maximum consistent trees in polynomial space. Finally, for a set T of m rooted or unrooted trees with maximum degree D and distinctly leaf-labeled by some subset of a set L of n labels, we compute, in O(2^{mD} n^m m^5 n^6 log(m)) time, a tree distinctly leaf-labeled by a maximum-size subset X of L that all trees in T, when restricted to X, are consistent with.
30 CFR 7.87 - Test to determine the maximum fuel-air ratio.
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Test to determine the maximum fuel-air ratio. 7... Use in Underground Coal Mines § 7.87 Test to determine the maximum fuel-air ratio. (a) Test procedure... several speed/torque conditions to determine the concentrations of CO and NOX, dry basis, in the...
Morrison, Glenn; Shaughnessy, Richard; Shu, Shi
2011-02-01
A Monte Carlo analysis of indoor ozone levels in four cities was applied to provide guidance to regulatory agencies on setting maximum ozone emission rates from consumer appliances. Measured distributions of air exchange rates, ozone decay rates and outdoor ozone levels at monitoring stations were combined with a steady-state indoor air quality model resulting in emission rate distributions (mg h -1) as a function of % of building hours protected from exceeding a target maximum indoor concentration of 20 ppb. Whole-year, summer and winter results for Elizabeth, NJ, Houston, TX, Windsor, ON, and Los Angeles, CA exhibited strong regional differences, primarily due to differences in air exchange rates. Infiltration of ambient ozone at higher average air exchange rates significantly reduces allowable emission rates, even though air exchange also dilutes emissions from appliances. For Houston, TX and Windsor, ON, which have lower average residential air exchange rates, emission rates ranged from -1.1 to 2.3 mg h -1 for scenarios that protect 80% or more of building hours from experiencing ozone concentrations greater than 20 ppb in summer. For Los Angeles, CA and Elizabeth, NJ, with higher air exchange rates, only negative emission rates were allowable to provide the same level of protection. For the 80th percentile residence, we estimate that an 8-h average limit concentration of 20 ppb would be exceeded, even in the absence of an indoor ozone source, 40 or more days per year in any of the cities analyzed. The negative emission rates emerging from the analysis suggest that only a zero-emission rate standard is prudent for Los Angeles, Elizabeth, NJ and other regions with higher summertime air exchange rates. For regions such as Houston with lower summertime air exchange rates, the higher emission rates would likely increase occupant exposure to the undesirable products of ozone reactions, thus reinforcing the need for zero-emission rate standard.
Maximum orbit plane change with heat-transfer-rate considerations
Lee, J. Y.; Hull, D. G.
1990-01-01
Two aerodynamic maneuvers are considered for maximizing the plane change of a circular orbit: gliding flight with a maximum thrust segment to regain lost energy (aeroglide) and constant altitude cruise with the thrust being used to cancel the drag and maintain a high energy level (aerocruise). In both cases, the stagnation heating rate is limited. For aeroglide, the controls are the angle of attack, the bank angle, the time at which the burn begins, and the length of the burn. For aerocruise, the maneuver is divided into three segments: descent, cruise, and ascent. During descent the thrust is zero, and the controls are the angle of attack and the bank angle. During cruise, the only control is the assumed-constant angle of attack. During ascent, a maximum thrust segment is used to restore lost energy, and the controls are the angle of attack and bank angle. The optimization problems are solved with a nonlinear programming code known as GRG2. Numerical results for the Maneuverable Re-entry Research Vehicle with a heating-rate limit of 100 Btu/ft(2)-s show that aerocruise gives a maximum plane change of 2 deg, which is only 1 deg larger than that of aeroglide. On the other hand, even though aerocruise requires two thrust levels, the cruise characteristics of constant altitude, velocity, thrust, and angle of attack are easy to control.
Maximum Multiflow in Wireless Network Coding
Zhou, Jin-Yi; Jiang, Yong; Zheng, Hai-Tao
2012-01-01
In a multihop wireless network, wireless interference is crucial to the maximum multiflow (MMF) problem, which studies the maximum throughput between multiple pairs of sources and sinks. In this paper, we observe that network coding could help to decrease the impacts of wireless interference, and propose a framework to study the MMF problem for multihop wireless networks with network coding. Firstly, a network model is set up to describe the new conflict relations modified by network coding. Then, we formulate a linear programming problem to compute the maximum throughput and show its superiority over one in networks without coding. Finally, the MMF problem in wireless network coding is shown to be NP-hard and a polynomial approximation algorithm is proposed.
The Wiener maximum quadratic assignment problem
Cela, Eranda; Woeginger, Gerhard J
2011-01-01
We investigate a special case of the maximum quadratic assignment problem where one matrix is a product matrix and the other matrix is the distance matrix of a one-dimensional point set. We show that this special case, which we call the Wiener maximum quadratic assignment problem, is NP-hard in the ordinary sense and solvable in pseudo-polynomial time. Our approach also yields a polynomial time solution for the following problem from chemical graph theory: Find a tree that maximizes the Wiener index among all trees with a prescribed degree sequence. This settles an open problem from the literature.
Maximum confidence measurements via probabilistic quantum cloning
Zhang Wen-Hai; Yu Long-Bao; Cao Zhuo-Liang; Ye Liu
2013-01-01
Probabilistic quantum cloning (PQC) cannot copy a set of linearly dependent quantum states.In this paper,we show that if incorrect copies are allowed to be produced,linearly dependent quantum states may also be cloned by the PQC.By exploiting this kind of PQC to clone a special set of three linearly dependent quantum states,we derive the upper bound of the maximum confidence measure of a set.An explicit transformation of the maximum confidence measure is presented.
Revealing the Maximum Strength in Nanotwinned Copper
Lu, L.; Chen, X.; Huang, Xiaoxu
2009-01-01
The strength of polycrystalline materials increases with decreasing grain size. Below a critical size, smaller grains might lead to softening, as suggested by atomistic simulations. The strongest size should arise at a transition in deformation mechanism from lattice dislocation activities to grain...... boundary–related processes. We investigated the maximum strength of nanotwinned copper samples with different twin thicknesses. We found that the strength increases with decreasing twin thickness, reaching a maximum at 15 nanometers, followed by a softening at smaller values that is accompanied by enhanced...
The Maximum Resource Bin Packing Problem
Boyar, J.; Epstein, L.; Favrholdt, L.M.
2006-01-01
Usually, for bin packing problems, we try to minimize the number of bins used or in the case of the dual bin packing problem, maximize the number or total size of accepted items. This paper presents results for the opposite problems, where we would like to maximize the number of bins used...... algorithms, First-Fit-Increasing and First-Fit-Decreasing for the maximum resource variant of classical bin packing. For the on-line variant, we define maximum resource variants of classical and dual bin packing. For dual bin packing, no on-line algorithm is competitive. For classical bin packing, we find...
Maximum entropy analysis of EGRET data
Pohl, M.; Strong, A.W.
1997-01-01
EGRET data are usually analysed on the basis of the Maximum-Likelihood method \\cite{ma96} in a search for point sources in excess to a model for the background radiation (e.g. \\cite{hu97}). This method depends strongly on the quality of the background model, and thus may have high systematic unce...... uncertainties in region of strong and uncertain background like the Galactic Center region. Here we show images of such regions obtained by the quantified Maximum-Entropy method. We also discuss a possible further use of MEM in the analysis of problematic regions of the sky....
Revealing the Maximum Strength in Nanotwinned Copper
Lu, L.; Chen, X.; Huang, Xiaoxu
2009-01-01
The strength of polycrystalline materials increases with decreasing grain size. Below a critical size, smaller grains might lead to softening, as suggested by atomistic simulations. The strongest size should arise at a transition in deformation mechanism from lattice dislocation activities to grain...... boundary–related processes. We investigated the maximum strength of nanotwinned copper samples with different twin thicknesses. We found that the strength increases with decreasing twin thickness, reaching a maximum at 15 nanometers, followed by a softening at smaller values that is accompanied by enhanced...
Optical and terahertz spectra analysis by the maximum entropy method.
Vartiainen, Erik M; Peiponen, Kai-Erik
2013-06-01
Phase retrieval is one of the classical problems in various fields of physics including x-ray crystallography, astronomy and spectroscopy. It arises when only an amplitude measurement on electric field can be made while both amplitude and phase of the field are needed for obtaining the desired material properties. In optical and terahertz spectroscopies, in particular, phase retrieval is a one-dimensional problem, which is considered as unsolvable in general. Nevertheless, an approach utilizing the maximum entropy principle has proven to be a feasible tool in various applications of optical, both linear and nonlinear, as well as in terahertz spectroscopies, where the one-dimensional phase retrieval problem arises. In this review, we focus on phase retrieval using the maximum entropy method in various spectroscopic applications. We review the theory behind the method and illustrate through examples why and how the method works, as well as discuss its limitations.
Optimal Portfolio Strategy under Rolling Economic Maximum Drawdown Constraints
Xiaojian Yu
2014-01-01
Full Text Available This paper deals with the problem of optimal portfolio strategy under the constraints of rolling economic maximum drawdown. A more practical strategy is developed by using rolling Sharpe ratio in computing the allocation proportion in contrast to existing models. Besides, another novel strategy named “REDP strategy” is further proposed, which replaces the rolling economic drawdown of the portfolio with the rolling economic drawdown of the risky asset. The simulation tests prove that REDP strategy can ensure the portfolio to satisfy the drawdown constraint and outperforms other strategies significantly. An empirical comparison research on the performances of different strategies is carried out by using the 23-year monthly data of SPTR, DJUBS, and 3-month T-bill. The investment cases of single risky asset and two risky assets are both studied in this paper. Empirical results indicate that the REDP strategy successfully controls the maximum drawdown within the given limit and performs best in both return and risk.
2010-07-01
... concentration of pollutants discharged in mine drainage from mines operated to obtain iron ore shall not exceed... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Iron Ore... iron ore shall not exceed: Effluent characteristic Effluent limitations Maximum for any 1 day Average...
Analysis of Photovoltaic Maximum Power Point Trackers
Veerachary, Mummadi
The photovoltaic generator exhibits a non-linear i-v characteristic and its maximum power point (MPP) varies with solar insolation. An intermediate switch-mode dc-dc converter is required to extract maximum power from the photovoltaic array. In this paper buck, boost and buck-boost topologies are considered and a detailed mathematical analysis, both for continuous and discontinuous inductor current operation, is given for MPP operation. The conditions on the connected load values and duty ratio are derived for achieving the satisfactory maximum power point operation. Further, it is shown that certain load values, falling out of the optimal range, will drive the operating point away from the true maximum power point. Detailed comparison of various topologies for MPPT is given. Selection of the converter topology for a given loading is discussed. Detailed discussion on circuit-oriented model development is given and then MPPT effectiveness of various converter systems is verified through simulations. Proposed theory and analysis is validated through experimental investigations.
On maximum cycle packings in polyhedral graphs
Peter Recht
2014-04-01
Full Text Available This paper addresses upper and lower bounds for the cardinality of a maximum vertex-/edge-disjoint cycle packing in a polyhedral graph G. Bounds on the cardinality of such packings are provided, that depend on the size, the order or the number of faces of G, respectively. Polyhedral graphs are constructed, that attain these bounds.
Hard graphs for the maximum clique problem
Hoede, Cornelis
1988-01-01
The maximum clique problem is one of the NP-complete problems. There are graphs for which a reduction technique exists that transforms the problem for these graphs into one for graphs with specific properties in polynomial time. The resulting graphs do not grow exponentially in order and number. Gra
Maximum Likelihood Estimation of Search Costs
J.L. Moraga-Gonzalez (José Luis); M.R. Wildenbeest (Matthijs)
2006-01-01
textabstractIn a recent paper Hong and Shum (forthcoming) present a structural methodology to estimate search cost distributions. We extend their approach to the case of oligopoly and present a maximum likelihood estimate of the search cost distribution. We apply our method to a data set of online p
Weak Scale From the Maximum Entropy Principle
Hamada, Yuta; Kawana, Kiyoharu
2015-01-01
The theory of multiverse and wormholes suggests that the parameters of the Standard Model are fixed in such a way that the radiation of the $S^{3}$ universe at the final stage $S_{rad}$ becomes maximum, which we call the maximum entropy principle. Although it is difficult to confirm this principle generally, for a few parameters of the Standard Model, we can check whether $S_{rad}$ actually becomes maximum at the observed values. In this paper, we regard $S_{rad}$ at the final stage as a function of the weak scale ( the Higgs expectation value ) $v_{h}$, and show that it becomes maximum around $v_{h}={\\cal{O}}(300\\text{GeV})$ when the dimensionless couplings in the Standard Model, that is, the Higgs self coupling, the gauge couplings, and the Yukawa couplings are fixed. Roughly speaking, we find that the weak scale is given by \\begin{equation} v_{h}\\sim\\frac{T_{BBN}^{2}}{M_{pl}y_{e}^{5}},\
Weak scale from the maximum entropy principle
Hamada, Yuta; Kawai, Hikaru; Kawana, Kiyoharu
2015-03-01
The theory of the multiverse and wormholes suggests that the parameters of the Standard Model (SM) are fixed in such a way that the radiation of the S3 universe at the final stage S_rad becomes maximum, which we call the maximum entropy principle. Although it is difficult to confirm this principle generally, for a few parameters of the SM, we can check whether S_rad actually becomes maximum at the observed values. In this paper, we regard S_rad at the final stage as a function of the weak scale (the Higgs expectation value) vh, and show that it becomes maximum around vh = {{O}} (300 GeV) when the dimensionless couplings in the SM, i.e., the Higgs self-coupling, the gauge couplings, and the Yukawa couplings are fixed. Roughly speaking, we find that the weak scale is given by vh ˜ T_{BBN}2 / (M_{pl}ye5), where ye is the Yukawa coupling of electron, T_BBN is the temperature at which the Big Bang nucleosynthesis starts, and M_pl is the Planck mass.
Global characterization of the Holocene Thermal Maximum
Renssen, H.; Seppä, H.; Crosta, X.; Goosse, H.; Roche, D.M.V.A.P.
2012-01-01
We analyze the global variations in the timing and magnitude of the Holocene Thermal Maximum (HTM) and their dependence on various forcings in transient simulations covering the last 9000 years (9 ka), performed with a global atmosphere-ocean-vegetation model. In these experiments, we consider the i
Instance Optimality of the Adaptive Maximum Strategy
L. Diening; C. Kreuzer; R. Stevenson
2016-01-01
In this paper, we prove that the standard adaptive finite element method with a (modified) maximum marking strategy is instance optimal for the total error, being the square root of the squared energy error plus the squared oscillation. This result will be derived in the model setting of Poisson’s e
Maximum phonation time: variability and reliability.
Speyer, Renée; Bogaardt, Hans C A; Passos, Valéria Lima; Roodenburg, Nel P H D; Zumach, Anne; Heijnen, Mariëlle A M; Baijens, Laura W J; Fleskens, Stijn J H M; Brunings, Jan W
2010-05-01
The objective of the study was to determine maximum phonation time reliability as a function of the number of trials, days, and raters in dysphonic and control subjects. Two groups of adult subjects participated in this reliability study: a group of outpatients with functional or organic dysphonia versus a group of healthy control subjects matched by age and gender. Over a period of maximally 6 weeks, three video recordings were made of five subjects' maximum phonation time trials. A panel of five experts were responsible for all measurements, including a repeated measurement of the subjects' first recordings. Patients showed significantly shorter maximum phonation times compared with healthy controls (on average, 6.6 seconds shorter). The averaged interclass correlation coefficient (ICC) over all raters per trial for the first day was 0.998. The averaged reliability coefficient per rater and per trial for repeated measurements of the first day's data was 0.997, indicating high intrarater reliability. The mean reliability coefficient per day for one trial was 0.939. When using five trials, the reliability increased to 0.987. The reliability over five trials for a single day was 0.836; for 2 days, 0.911; and for 3 days, 0.935. To conclude, the maximum phonation time has proven to be a highly reliable measure in voice assessment. A single rater is sufficient to provide highly reliable measurements.
Maximum Phonation Time: Variability and Reliability
R. Speyer; H.C.A. Bogaardt; V.L. Passos; N.P.H.D. Roodenburg; A. Zumach; M.A.M. Heijnen; L.W.J. Baijens; S.J.H.M. Fleskens; J.W. Brunings
2010-01-01
The objective of the study was to determine maximum phonation time reliability as a function of the number of trials, days, and raters in dysphonic and control subjects. Two groups of adult subjects participated in this reliability study: a group of outpatients with functional or organic dysphonia v
Maximum likelihood estimation of fractionally cointegrated systems
Lasak, Katarzyna
In this paper we consider a fractionally cointegrated error correction model and investigate asymptotic properties of the maximum likelihood (ML) estimators of the matrix of the cointe- gration relations, the degree of fractional cointegration, the matrix of the speed of adjustment...
Maximum likelihood estimation for integrated diffusion processes
Baltazar-Larios, Fernando; Sørensen, Michael
EM-algorithm to obtain maximum likelihood estimates of the parameters in the diffusion model. As part of the algorithm, we use a recent simple method for approximate simulation of diffusion bridges. In simulation studies for the Ornstein-Uhlenbeck process and the CIR process the proposed method works...
Maximum gain of Yagi-Uda arrays
Bojsen, J.H.; Schjær-Jacobsen, Hans; Nilsson, E.
1971-01-01
Numerical optimisation techniques have been used to find the maximum gain of some specific parasitic arrays. The gain of an array of infinitely thin, equispaced dipoles loaded with arbitrary reactances has been optimised. The results show that standard travelling-wave design methods are not optimum....... Yagi–Uda arrays with equal and unequal spacing have also been optimised with experimental verification....
Herrmann, Richard A.
1974-01-01
By concentrating radioactivity contained on luminous dials, a teacher can make a high reading source for classroom experiments on radiation. The preparation of the source and its uses are described. (DT)
[Evolutionary process unveiled by the maximum genetic diversity hypothesis].
Huang, Yi-Min; Xia, Meng-Ying; Huang, Shi
2013-05-01
As two major popular theories to explain evolutionary facts, the neutral theory and Neo-Darwinism, despite their proven virtues in certain areas, still fail to offer comprehensive explanations to such fundamental evolutionary phenomena as the genetic equidistance result, abundant overlap sites, increase in complexity over time, incomplete understanding of genetic diversity, and inconsistencies with fossil and archaeological records. Maximum genetic diversity hypothesis (MGD), however, constructs a more complete evolutionary genetics theory that incorporates all of the proven virtues of existing theories and adds to them the novel concept of a maximum or optimum limit on genetic distance or diversity. It has yet to meet a contradiction and explained for the first time the half-century old Genetic Equidistance phenomenon as well as most other major evolutionary facts. It provides practical and quantitative ways of studying complexity. Molecular interpretation using MGD-based methods reveal novel insights on the origins of humans and other primates that are consistent with fossil evidence and common sense, and reestablished the important role of China in the evolution of humans. MGD theory has also uncovered an important genetic mechanism in the construction of complex traits and the pathogenesis of complex diseases. We here made a series of sequence comparisons among yeasts, fishes and primates to illustrate the concept of limit on genetic distance. The idea of limit or optimum is in line with the yin-yang paradigm in the traditional Chinese view of the universal creative law in nature.
M.A.G. Silva
2009-10-01
Full Text Available Estudaram-se as alterações nos eletrólitos, nos gases sanguíneos, na osmolalidade, no hematócrito, na hemoglobina, nas bases tituláveis e no anion gap no sangue venoso de 11 equinos da raça Puro Sangue Árabe, destreinados, submetidos a exercício máximo e submáximo em esteira rolante. Esses animais passaram por período de três dias de adaptação à esteira rolante e posteriormente realizaram dois exercícios testes, um de curta e outro de longa duração. Foram coletadas amostras de sangue venoso antes, imediatamente após e 30 minutos após o término dos exercícios. Após a realização do exercício máximo, observou-se diminuição significativa no pHv, na PvCO2, no HCO3, na cBase além de elevação no AG. Detectou-se também aumento do K+, do Ht e da Hb. Ao final do exercício submáximo, constatou-se somente aumento significativo no pHv, na cBase, na SatvO2 e na PvO2. Conclui-se que os equinos submetidos a exercício máximo desenvolveram acidose metabólica e alcalose respiratória compensatória, hipercalemia e aumento nos valores de hematócrito e hemoglobina. No exercício submáximo, os animais apresentaram alcalose metabólica hipoclorêmica e não ocorreram alterações no equilíbrio hidroeletrolítico.Changes in electrolytes, blood gas, osmolality, hematocrit, hemoglobin, base concentration, and anion gap in 11 detrained Arabian horses during exercise on a high-speed treadmill were investigated. After a period of three days of adaptation on the rolling mat, the animals were submitted to two exercises: one of short (maximum and other of long duration (submaximum. Venous blood samples were obtained right before, and 30 minutes after the exercise. After the maximum exercise, it was observed a significative decrease in pHv, PvCO2, HCO3, and cBase and an increase in AG. It was also observed hypercalemia and increase in Ht and Hb. At the final of the submaximum exercise, it was observed significative increase in pH, c
Application of Maximum Entropy Distribution to the Statistical Properties of Wave Groups
无
2007-01-01
The new distributions of the statistics of wave groups based on the maximum entropy principle are presented. The maximum entropy distributions appear to be superior to conventional distributions when applied to a limited amount of information. Its applications to the wave group properties show the effectiveness of the maximum entropy distribution. FFT filtering method is employed to obtain the wave envelope fast and efficiently. Comparisons of both the maximum entropy distribution and the distribution of Longuet-Higgins (1984) with the laboratory wind-wave data show that the former gives a better fit.
Solar maximum mission panel jettison analysis remote manipulator system
Bauer, R. B.
1980-01-01
A study is presented of the development of the Remote Manipulator System (RMS) configurations for jettison of the solar panels on the Solar Maximum Mission/Multimission Satellite. A valid RMS maneuver between jettison configurations was developed. Arm and longeron loads and effector excursions due to the solar panel jettison were determined to see if they were within acceptable limits. These loads and end effector excursions were analyzed under two RMS modes, servos active in position hold submode, and in the brakes on mode.
Combining Experiments and Simulations Using the Maximum Entropy Principle
Boomsma, Wouter; Ferkinghoff-Borg, Jesper; Lindorff-Larsen, Kresten
2014-01-01
applications in our field has grown steadily in recent years, in areas as diverse as sequence analysis, structural modelling, and neurobiology. In this Perspectives article, we give a broad introduction to the method, in an attempt to encourage its further adoption. The general procedure is explained...... in the context of a simple example, after which we proceed with a real-world application in the field of molecular simulations, where the maximum entropy procedure has recently provided new insight. Given the limited accuracy of force fields, macromolecular simulations sometimes produce results...
Model Selection Through Sparse Maximum Likelihood Estimation
Banerjee, Onureena; D'Aspremont, Alexandre
2007-01-01
We consider the problem of estimating the parameters of a Gaussian or binary distribution in such a way that the resulting undirected graphical model is sparse. Our approach is to solve a maximum likelihood problem with an added l_1-norm penalty term. The problem as formulated is convex but the memory requirements and complexity of existing interior point methods are prohibitive for problems with more than tens of nodes. We present two new algorithms for solving problems with at least a thousand nodes in the Gaussian case. Our first algorithm uses block coordinate descent, and can be interpreted as recursive l_1-norm penalized regression. Our second algorithm, based on Nesterov's first order method, yields a complexity estimate with a better dependence on problem size than existing interior point methods. Using a log determinant relaxation of the log partition function (Wainwright & Jordan (2006)), we show that these same algorithms can be used to solve an approximate sparse maximum likelihood problem for...
Maximum-entropy description of animal movement.
Fleming, Chris H; Subaşı, Yiğit; Calabrese, Justin M
2015-03-01
We introduce a class of maximum-entropy states that naturally includes within it all of the major continuous-time stochastic processes that have been applied to animal movement, including Brownian motion, Ornstein-Uhlenbeck motion, integrated Ornstein-Uhlenbeck motion, a recently discovered hybrid of the previous models, and a new model that describes central-place foraging. We are also able to predict a further hierarchy of new models that will emerge as data quality improves to better resolve the underlying continuity of animal movement. Finally, we also show that Langevin equations must obey a fluctuation-dissipation theorem to generate processes that fall from this class of maximum-entropy distributions when the constraints are purely kinematic.
Pareto versus lognormal: a maximum entropy test.
Bee, Marco; Riccaboni, Massimo; Schiavo, Stefano
2011-08-01
It is commonly found that distributions that seem to be lognormal over a broad range change to a power-law (Pareto) distribution for the last few percentiles. The distributions of many physical, natural, and social events (earthquake size, species abundance, income and wealth, as well as file, city, and firm sizes) display this structure. We present a test for the occurrence of power-law tails in statistical distributions based on maximum entropy. This methodology allows one to identify the true data-generating processes even in the case when it is neither lognormal nor Pareto. The maximum entropy approach is then compared with other widely used methods and applied to different levels of aggregation of complex systems. Our results provide support for the theory that distributions with lognormal body and Pareto tail can be generated as mixtures of lognormally distributed units.
Maximum Variance Hashing via Column Generation
Lei Luo
2013-01-01
item search. Recently, a number of data-dependent methods have been developed, reflecting the great potential of learning for hashing. Inspired by the classic nonlinear dimensionality reduction algorithm—maximum variance unfolding, we propose a novel unsupervised hashing method, named maximum variance hashing, in this work. The idea is to maximize the total variance of the hash codes while preserving the local structure of the training data. To solve the derived optimization problem, we propose a column generation algorithm, which directly learns the binary-valued hash functions. We then extend it using anchor graphs to reduce the computational cost. Experiments on large-scale image datasets demonstrate that the proposed method outperforms state-of-the-art hashing methods in many cases.
The Maximum Resource Bin Packing Problem
Boyar, J.; Epstein, L.; Favrholdt, L.M.
2006-01-01
algorithms, First-Fit-Increasing and First-Fit-Decreasing for the maximum resource variant of classical bin packing. For the on-line variant, we define maximum resource variants of classical and dual bin packing. For dual bin packing, no on-line algorithm is competitive. For classical bin packing, we find......Usually, for bin packing problems, we try to minimize the number of bins used or in the case of the dual bin packing problem, maximize the number or total size of accepted items. This paper presents results for the opposite problems, where we would like to maximize the number of bins used...... the competitive ratio of various natural algorithms. We study the general versions of the problems as well as the parameterized versions where there is an upper bound of on the item sizes, for some integer k....
Nonparametric Maximum Entropy Estimation on Information Diagrams
Martin, Elliot A; Meinke, Alexander; Děchtěrenko, Filip; Davidsen, Jörn
2016-01-01
Maximum entropy estimation is of broad interest for inferring properties of systems across many different disciplines. In this work, we significantly extend a technique we previously introduced for estimating the maximum entropy of a set of random discrete variables when conditioning on bivariate mutual informations and univariate entropies. Specifically, we show how to apply the concept to continuous random variables and vastly expand the types of information-theoretic quantities one can condition on. This allows us to establish a number of significant advantages of our approach over existing ones. Not only does our method perform favorably in the undersampled regime, where existing methods fail, but it also can be dramatically less computationally expensive as the cardinality of the variables increases. In addition, we propose a nonparametric formulation of connected informations and give an illustrative example showing how this agrees with the existing parametric formulation in cases of interest. We furthe...
Zipf's law, power laws and maximum entropy
Visser, Matt
2013-04-01
Zipf's law, and power laws in general, have attracted and continue to attract considerable attention in a wide variety of disciplines—from astronomy to demographics to software structure to economics to linguistics to zoology, and even warfare. A recent model of random group formation (RGF) attempts a general explanation of such phenomena based on Jaynes' notion of maximum entropy applied to a particular choice of cost function. In the present paper I argue that the specific cost function used in the RGF model is in fact unnecessarily complicated, and that power laws can be obtained in a much simpler way by applying maximum entropy ideas directly to the Shannon entropy subject only to a single constraint: that the average of the logarithm of the observable quantity is specified.
Zipf's law, power laws, and maximum entropy
Visser, Matt
2012-01-01
Zipf's law, and power laws in general, have attracted and continue to attract considerable attention in a wide variety of disciplines - from astronomy to demographics to economics to linguistics to zoology, and even warfare. A recent model of random group formation [RGF] attempts a general explanation of such phenomena based on Jaynes' notion of maximum entropy applied to a particular choice of cost function. In the present article I argue that the cost function used in the RGF model is in fact unnecessarily complicated, and that power laws can be obtained in a much simpler way by applying maximum entropy ideas directly to the Shannon entropy subject only to a single constraint: that the average of the logarithm of the observable quantity is specified.
Regions of constrained maximum likelihood parameter identifiability
Lee, C.-H.; Herget, C. J.
1975-01-01
This paper considers the parameter identification problem of general discrete-time, nonlinear, multiple-input/multiple-output dynamic systems with Gaussian-white distributed measurement errors. Knowledge of the system parameterization is assumed to be known. Regions of constrained maximum likelihood (CML) parameter identifiability are established. A computation procedure employing interval arithmetic is proposed for finding explicit regions of parameter identifiability for the case of linear systems. It is shown that if the vector of true parameters is locally CML identifiable, then with probability one, the vector of true parameters is a unique maximal point of the maximum likelihood function in the region of parameter identifiability and the CML estimation sequence will converge to the true parameters.
A Maximum Radius for Habitable Planets.
Alibert, Yann
2015-09-01
We compute the maximum radius a planet can have in order to fulfill two constraints that are likely necessary conditions for habitability: 1- surface temperature and pressure compatible with the existence of liquid water, and 2- no ice layer at the bottom of a putative global ocean, that would prevent the operation of the geologic carbon cycle to operate. We demonstrate that, above a given radius, these two constraints cannot be met: in the Super-Earth mass range (1-12 Mearth), the overall maximum that a planet can have varies between 1.8 and 2.3 Rearth. This radius is reduced when considering planets with higher Fe/Si ratios, and taking into account irradiation effects on the structure of the gas envelope.
Maximum Profit Configurations of Commercial Engines
Yiran Chen
2011-01-01
An investigation of commercial engines with finite capacity low- and high-price economic subsystems and a generalized commodity transfer law [n ∝ Δ (P m)] in commodity flow processes, in which effects of the price elasticities of supply and demand are introduced, is presented in this paper. Optimal cycle configurations of commercial engines for maximum profit are obtained by applying optimal control theory. In some special cases, the eventual state—market equilibrium—is solely determined by t...
A stochastic maximum principle via Malliavin calculus
Øksendal, Bernt; Zhou, Xun Yu; Meyer-Brandis, Thilo
2008-01-01
This paper considers a controlled It\\^o-L\\'evy process where the information available to the controller is possibly less than the overall information. All the system coefficients and the objective performance functional are allowed to be random, possibly non-Markovian. Malliavin calculus is employed to derive a maximum principle for the optimal control of such a system where the adjoint process is explicitly expressed.
Tissue radiation response with maximum Tsallis entropy.
Sotolongo-Grau, O; Rodríguez-Pérez, D; Antoranz, J C; Sotolongo-Costa, Oscar
2010-10-08
The expression of survival factors for radiation damaged cells is currently based on probabilistic assumptions and experimentally fitted for each tumor, radiation, and conditions. Here, we show how the simplest of these radiobiological models can be derived from the maximum entropy principle of the classical Boltzmann-Gibbs expression. We extend this derivation using the Tsallis entropy and a cutoff hypothesis, motivated by clinical observations. The obtained expression shows a remarkable agreement with the experimental data found in the literature.
Maximum Estrada Index of Bicyclic Graphs
Wang, Long; Wang, Yi
2012-01-01
Let $G$ be a simple graph of order $n$, let $\\lambda_1(G),\\lambda_2(G),...,\\lambda_n(G)$ be the eigenvalues of the adjacency matrix of $G$. The Esrada index of $G$ is defined as $EE(G)=\\sum_{i=1}^{n}e^{\\lambda_i(G)}$. In this paper we determine the unique graph with maximum Estrada index among bicyclic graphs with fixed order.
Maximum privacy without coherence, zero-error
Leung, Debbie; Yu, Nengkun
2016-09-01
We study the possible difference between the quantum and the private capacities of a quantum channel in the zero-error setting. For a family of channels introduced by Leung et al. [Phys. Rev. Lett. 113, 030512 (2014)], we demonstrate an extreme difference: the zero-error quantum capacity is zero, whereas the zero-error private capacity is maximum given the quantum output dimension.
Maximum solid solubility of transition metals in vanadium solvent
ZHANG Jin-long; FANG Shou-shi; ZHOU Zi-qiang; LIN Gen-wen; GE Jian-sheng; FENG Feng
2005-01-01
Maximum solid solubility (Cmax) of different transition metals in metal solvent can be described by a semi-empirical equation using function Zf that contains electronegativity difference, atomic diameter and electron concentration. The relation between Cmax and these parameters of transition metals in vanadium solvent was studied.It is shown that the relation of Cmax and function Zf can be expressed as ln Cmax = Zf = 7. 316 5-2. 780 5 (△X)2 -71. 278δ2 -0. 855 56n2/3. The factor of atomic size parameter has the largest effect on the Cmax of the V binary alloy;followed by the factor of electronegativity difference; the electrons concentration has the smallest effect among the three bond parameters. Function Zf is used for predicting the unknown Cmax of the transition metals in vanadium solvent. The results are compared with Darken-Gurry theorem, which can be deduced by the obtained function Zf in this work.
Perego, D L
2002-01-01
A limit on the tau neutrino mass is obtained using all the $Z^{0} \\to \\tau^{+} \\tau^{-}$ data collected at LEP by the DELPHI detector between 1992 and 1995. In this analysis events in which one of the taus decays into one charged particle, while the second $\\tau$ decays into f{}ive charged pions (1-5 topology) have been used. The neutrino mass is determined from a bidimensional \\fit ~on the invariant mass $m^{*}_{5 \\pi}$ and on the energy $E_{5 \\pi}$ of the f{}ive $\\pi^{\\pm}$ system. The result found is $m_{\
Boundary condition effects on maximum groundwater withdrawal in coastal aquifers.
Lu, Chunhui; Chen, Yiming; Luo, Jian
2012-01-01
Prevention of sea water intrusion in coastal aquifers subject to groundwater withdrawal requires optimization of well pumping rates to maximize the water supply while avoiding sea water intrusion. Boundary conditions and the aquifer domain size have significant influences on simulating flow and concentration fields and estimating maximum pumping rates. In this study, an analytical solution is derived based on the potential-flow theory for evaluating maximum groundwater pumping rates in a domain with a constant hydraulic head landward boundary. An empirical correction factor, which was introduced by Pool and Carrera (2011) to account for mixing in the case with a constant recharge rate boundary condition, is found also applicable for the case with a constant hydraulic head boundary condition, and therefore greatly improves the usefulness of the sharp-interface analytical solution. Comparing with the solution for a constant recharge rate boundary, we find that a constant hydraulic head boundary often yields larger estimations of the maximum pumping rate and when the domain size is five times greater than the distance between the well and the coastline, the effect of setting different landward boundary conditions becomes insignificant with a relative difference between two solutions less than 2.5%. These findings can serve as a preliminary guidance for conducting numerical simulations and designing tank-scale laboratory experiments for studying groundwater withdrawal problems in coastal aquifers with minimized boundary condition effects.
A Maximum Resonant Set of Polyomino Graphs
Zhang Heping
2016-05-01
Full Text Available A polyomino graph P is a connected finite subgraph of the infinite plane grid such that each finite face is surrounded by a regular square of side length one and each edge belongs to at least one square. A dimer covering of P corresponds to a perfect matching. Different dimer coverings can interact via an alternating cycle (or square with respect to them. A set of disjoint squares of P is a resonant set if P has a perfect matching M so that each one of those squares is M-alternating. In this paper, we show that if K is a maximum resonant set of P, then P − K has a unique perfect matching. We further prove that the maximum forcing number of a polyomino graph is equal to the cardinality of a maximum resonant set. This confirms a conjecture of Xu et al. [26]. We also show that if K is a maximal alternating set of P, then P − K has a unique perfect matching.
The maximum rate of mammal evolution
Evans, Alistair R.; Jones, David; Boyer, Alison G.; Brown, James H.; Costa, Daniel P.; Ernest, S. K. Morgan; Fitzgerald, Erich M. G.; Fortelius, Mikael; Gittleman, John L.; Hamilton, Marcus J.; Harding, Larisa E.; Lintulaakso, Kari; Lyons, S. Kathleen; Okie, Jordan G.; Saarinen, Juha J.; Sibly, Richard M.; Smith, Felisa A.; Stephens, Patrick R.; Theodor, Jessica M.; Uhen, Mark D.
2012-03-01
How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous-Paleogene (K-Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes.
Minimal Length, Friedmann Equations and Maximum Density
Awad, Adel
2014-01-01
Inspired by Jacobson's thermodynamic approach[gr-qc/9504004], Cai et al [hep-th/0501055,hep-th/0609128] have shown the emergence of Friedmann equations from the first law of thermodynamics. We extend Akbar--Cai derivation [hep-th/0609128] of Friedmann equations to accommodate a general entropy-area law. Studying the resulted Friedmann equations using a specific entropy-area law, which is motivated by the generalized uncertainty principle (GUP), reveals the existence of a maximum energy density closed to Planck density. Allowing for a general continuous pressure $p(\\rho,a)$ leads to bounded curvature invariants and a general nonsingular evolution. In this case, the maximum energy density is reached in a finite time and there is no cosmological evolution beyond this point which leaves the big bang singularity inaccessible from a spacetime prospective. The existence of maximum energy density and a general nonsingular evolution is independent of the equation of state and the spacial curvature $k$. As an example w...
Maximum saliency bias in binocular fusion
Lu, Yuhao; Stafford, Tom; Fox, Charles
2016-07-01
Subjective experience at any instant consists of a single ("unitary"), coherent interpretation of sense data rather than a "Bayesian blur" of alternatives. However, computation of Bayes-optimal actions has no role for unitary perception, instead being required to integrate over every possible action-percept pair to maximise expected utility. So what is the role of unitary coherent percepts, and how are they computed? Recent work provided objective evidence for non-Bayes-optimal, unitary coherent, perception and action in humans; and further suggested that the percept selected is not the maximum a posteriori percept but is instead affected by utility. The present study uses a binocular fusion task first to reproduce the same effect in a new domain, and second, to test multiple hypotheses about exactly how utility may affect the percept. After accounting for high experimental noise, it finds that both Bayes optimality (maximise expected utility) and the previously proposed maximum-utility hypothesis are outperformed in fitting the data by a modified maximum-salience hypothesis, using unsigned utility magnitudes in place of signed utilities in the bias function.
The maximum rate of mammal evolution
Evans, Alistair R.; Jones, David; Boyer, Alison G.; Brown, James H.; Costa, Daniel P.; Ernest, S. K. Morgan; Fitzgerald, Erich M. G.; Fortelius, Mikael; Gittleman, John L.; Hamilton, Marcus J.; Harding, Larisa E.; Lintulaakso, Kari; Lyons, S. Kathleen; Okie, Jordan G.; Saarinen, Juha J.; Sibly, Richard M.; Smith, Felisa A.; Stephens, Patrick R.; Theodor, Jessica M.; Uhen, Mark D.
2012-01-01
How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous–Paleogene (K–Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes. PMID:22308461
The maximum rate of mammal evolution.
Evans, Alistair R; Jones, David; Boyer, Alison G; Brown, James H; Costa, Daniel P; Ernest, S K Morgan; Fitzgerald, Erich M G; Fortelius, Mikael; Gittleman, John L; Hamilton, Marcus J; Harding, Larisa E; Lintulaakso, Kari; Lyons, S Kathleen; Okie, Jordan G; Saarinen, Juha J; Sibly, Richard M; Smith, Felisa A; Stephens, Patrick R; Theodor, Jessica M; Uhen, Mark D
2012-03-13
How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous-Paleogene (K-Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes.
Maximum capacities of the 100-B water plant
Strand, N.O.
1953-04-27
Increases in process water flows will be needed as the current program of increasing pile power levels continues. The future process water flows that will be required are known to be beyond the present maximum capacities of component parts of the water system. It is desirable to determine the present maximum capacities of each major component part so that plans can be mode for modifications and/or additions to the present equipment to meet future required flows. The apparent hydraulic limit of the present piles is about 68,000 gpm. This figure is based on a tube inlet pressure of 400 psi, a tube flow of 34 gpm, and 2,000 effective tubes. In this document the results of tests and calculations to determine the present maximum capacities of each major component part of the 100-B water system will be presented. Emergency steam operated pumps will not be considered as it is doubtful of year around operation of a steam driven pump could be economically justified. Some possible ways to increase the process water flows of each component part of the water system to the ultimate of 68,000 gpm are given.
Mitigation of maximum world oil production: Shortage scenarios
Hirsch, Robert L. [Management Information Services, Inc., 723 Fords Landing Way, Alexandria, VA 22314 (United States)
2008-02-15
A framework is developed for planning the mitigation of the oil shortages that will be caused by world oil production reaching a maximum and going into decline. To estimate potential economic impacts, a reasonable relationship between percent decline in world oil supply and percent decline in world GDP was determined to be roughly 1:1. As a limiting case for decline rates, giant fields were examined. Actual oil production from Europe and North America indicated significant periods of relatively flat oil production (plateaus). However, before entering its plateau period, North American oil production went through a sharp peak and steep decline. Examination of a number of future world oil production forecasts showed multi-year rollover/roll-down periods, which represent pseudoplateaus. Consideration of resource nationalism posits an Oil Exporter Withholding Scenario, which could potentially overwhelm all other considerations. Three scenarios for mitigation planning resulted from this analysis: (1) A Best Case, where maximum world oil production is followed by a multi-year plateau before the onset of a monatomic decline rate of 2-5% per year; (2) A Middling Case, where world oil production reaches a maximum, after which it drops into a long-term, 2-5% monotonic annual decline; and finally (3) A Worst Case, where the sharp peak of the Middling Case is degraded by oil exporter withholding, leading to world oil shortages growing potentially more rapidly than 2-5% per year, creating the most dire world economic impacts. (author)
Efficiency at Maximum Power of Low-Dissipation Carnot Engines
Esposito, Massimiliano; Kawai, Ryoichi; Lindenberg, Katja; van den Broeck, Christian
2010-10-01
We study the efficiency at maximum power, η*, of engines performing finite-time Carnot cycles between a hot and a cold reservoir at temperatures Th and Tc, respectively. For engines reaching Carnot efficiency ηC=1-Tc/Th in the reversible limit (long cycle time, zero dissipation), we find in the limit of low dissipation that η* is bounded from above by ηC/(2-ηC) and from below by ηC/2. These bounds are reached when the ratio of the dissipation during the cold and hot isothermal phases tend, respectively, to zero or infinity. For symmetric dissipation (ratio one) the Curzon-Ahlborn efficiency ηCA=1-Tc/Th is recovered.
Efficiency at maximum power of low-dissipation Carnot engines.
Esposito, Massimiliano; Kawai, Ryoichi; Lindenberg, Katja; Van den Broeck, Christian
2010-10-01
We study the efficiency at maximum power, η*, of engines performing finite-time Carnot cycles between a hot and a cold reservoir at temperatures Th and Tc, respectively. For engines reaching Carnot efficiency ηC=1-Tc/Th in the reversible limit (long cycle time, zero dissipation), we find in the limit of low dissipation that η* is bounded from above by ηC/(2-ηC) and from below by ηC/2. These bounds are reached when the ratio of the dissipation during the cold and hot isothermal phases tend, respectively, to zero or infinity. For symmetric dissipation (ratio one) the Curzon-Ahlborn efficiency ηCA=1-√Tc/Th] is recovered.
Generalized Entropy Concentration for Counts
Oikonomou, Kostas N
2016-01-01
We consider the phenomenon of entropy concentration under linear constraints in a discrete setting, using the "balls and bins" paradigm, but without the assumption that the number of balls allocated to the bins is known. Therefore instead of \\ frequency vectors and ordinary entropy, we have count vectors with unknown sum, and a certain generalized entropy. We show that if the constraints bound the allowable sums, this suffices for concentration to occur even in this setting. The concentration can be either in terms of deviation from the maximum generalized entropy value, or in terms of the norm of the difference from the maximum generalized entropy vector. Without any asymptotic considerations, we quantify the concentration in terms of various parameters, notably a tolerance on the constraints which ensures that they are always satisfied by an integral vector. Generalized entropy maximization is not only compatible with ordinary MaxEnt, but can also be considered an extension of it, as it allows us to address...
Combining experiments and simulations using the maximum entropy principle.
Wouter Boomsma
2014-02-01
Full Text Available A key component of computational biology is to compare the results of computer modelling with experimental measurements. Despite substantial progress in the models and algorithms used in many areas of computational biology, such comparisons sometimes reveal that the computations are not in quantitative agreement with experimental data. The principle of maximum entropy is a general procedure for constructing probability distributions in the light of new data, making it a natural tool in cases when an initial model provides results that are at odds with experiments. The number of maximum entropy applications in our field has grown steadily in recent years, in areas as diverse as sequence analysis, structural modelling, and neurobiology. In this Perspectives article, we give a broad introduction to the method, in an attempt to encourage its further adoption. The general procedure is explained in the context of a simple example, after which we proceed with a real-world application in the field of molecular simulations, where the maximum entropy procedure has recently provided new insight. Given the limited accuracy of force fields, macromolecular simulations sometimes produce results that are at not in complete and quantitative accordance with experiments. A common solution to this problem is to explicitly ensure agreement between the two by perturbing the potential energy function towards the experimental data. So far, a general consensus for how such perturbations should be implemented has been lacking. Three very recent papers have explored this problem using the maximum entropy approach, providing both new theoretical and practical insights to the problem. We highlight each of these contributions in turn and conclude with a discussion on remaining challenges.
Combining experiments and simulations using the maximum entropy principle.
Boomsma, Wouter; Ferkinghoff-Borg, Jesper; Lindorff-Larsen, Kresten
2014-02-01
A key component of computational biology is to compare the results of computer modelling with experimental measurements. Despite substantial progress in the models and algorithms used in many areas of computational biology, such comparisons sometimes reveal that the computations are not in quantitative agreement with experimental data. The principle of maximum entropy is a general procedure for constructing probability distributions in the light of new data, making it a natural tool in cases when an initial model provides results that are at odds with experiments. The number of maximum entropy applications in our field has grown steadily in recent years, in areas as diverse as sequence analysis, structural modelling, and neurobiology. In this Perspectives article, we give a broad introduction to the method, in an attempt to encourage its further adoption. The general procedure is explained in the context of a simple example, after which we proceed with a real-world application in the field of molecular simulations, where the maximum entropy procedure has recently provided new insight. Given the limited accuracy of force fields, macromolecular simulations sometimes produce results that are at not in complete and quantitative accordance with experiments. A common solution to this problem is to explicitly ensure agreement between the two by perturbing the potential energy function towards the experimental data. So far, a general consensus for how such perturbations should be implemented has been lacking. Three very recent papers have explored this problem using the maximum entropy approach, providing both new theoretical and practical insights to the problem. We highlight each of these contributions in turn and conclude with a discussion on remaining challenges.
Tests of maximum oxygen intake. A critical review.
Shephard, R J
1984-01-01
The determinants of endurance effort vary, depending upon the extent of the muscle mass that is activated. Large muscle work, such as treadmill running, is halted by impending circulatory failure; lack of venous return may compound the basic problem of an excessive cardiac work-load. If the task calls for use of a smaller muscle mass, there is ultimately difficulty in perfusing the active muscles, and glycolysis is halted by an accumulation of acid metabolites. Simple field tests of endurance, such as Cooper's 12-minute run and the Canadian Home Fitness Test, have some value in the rapid screening of large populations, but like other submaximal tests of human performance they lack the precision needed to advise the individual. The directly measured maximum oxygen intake (VO2 max) varies with the type of exercise. The highest values are obtained during uphill treadmill running, but well trained athletes often approach these values during performance of sport-specific tasks. Limitations of methodology and wide interindividual variations of constitutional potential limit the interpretation of maximum oxygen intake data in terms of personal fitness, exercise prescription and the monitoring of training responses. The main practical value of VO2 max measurement is in the functional assessment of patients with cardiorespiratory disease, since changes are then large relative to the precision of the test.
Neuhauser, K. [Building Science Corporation (BSC), Somer, MA (United States); Bergey, D. [Building Science Corporation (BSC), Somer, MA (United States); Osser, R. [Building Science Corporation (BSC), Somer, MA (United States)
2012-03-01
This project examines a large-scale renovation project within a 500 unit, 1960's era subsidized urban housing community. This research focuses on the airflow control and window replacement measures implemented as part of the renovations to the low-rise apartment buildings. The window replacement reduced the nominal conductive loss of the apartment enclosure by approximately 15%; air sealing measures reduced measured air leakage by approximately 40% on average.
Extracting maximum petrophysical and geological information from a limited reservoir database
Ali, M.; Chawathe, A.; Ouenes, A. [New Mexico Institute of Mining and Technology, Socorro, NM (United States)] [and others
1997-08-01
The characterization of old fields lacking sufficient core and log data is a challenging task. This paper describes a methodology that uses new and conventional tools to build a reliable reservoir model for the Sulimar Queen field. At the fine scale, permeability measured on a fine grid with a minipermeameter was used in conjunction with the petrographic data collected on multiple thin sections. The use of regression analysis and a newly developed fuzzy logic algorithm led to the identification of key petrographic elements which control permeability. At the log scale, old gamma ray logs were first rescaled/calibrated throughout the entire field for consistency and reliability using only four modem logs. Using data from one cored well and the rescaled gamma ray logs, correlations between core porosity, permeability, total water content and gamma ray were developed to complete the small scale characterization. At the reservoir scale, outcrop data and the rescaled gamma logs were used to define the reservoir structure over an area of ten square miles where only 36 wells were available. Given the structure, the rescaled gamma ray logs were used to build the reservoir volume by identifying the flow units and their continuity. Finally, history-matching results constrained to the primary production were used to estimate the dynamic reservoir properties such as relative permeabilities to complete the characterization. The obtained reservoir model was tested by forecasting the waterflood performance and which was in good agreement with the actual performance.
Hydrodynamic states in water below the temperature of the density maximum: the limit to supercooling
van der Elsken, J.; van Boom, L.; Bot, A.
1988-01-01
Spectra of fluctuations in the total intensity of laser light deflected by supercooled water show that even under carefully controlled conditions large samples give convection when cooled below -0%. This is in agreement with the Rayleigh versus Prandtlnumber relation for supercooled water.
Miniaturized concentration cells for small-scale energy harvesting based on reverse electrodialysis
Banan Sadeghian, Ramin; Pantchenko, Oxana; Tate, Daniel; Shakouri, Ali
2011-10-01
We describe experimental and theoretical results that demonstrate the feasibility of power generation using concentration cells based on ionic concentration gradients and reverse electrodialysis. A peak power density of 0.2 (0.7) μW cm-2 and a maximum energy density of 0.4 (0.4) mJ cm-3 delivered in 3 h to a 2 (5) kΩ resistor were recorded using a microfiltration (anion exchange) membrane, respectively. A comprehensive model is developed to predict the evolution of the output voltage with time in relation to the solute concentration in each cell and derive the power density and efficiency limits.
Surugaya, Naoki; Sato, Soichi; Jitsukata, Syu; Watahiki, Masaru
2008-04-01
Laser-induced photoacoustic spectroscopy was used in a quantitative analysis of Pu in HNO3 medium. Plutonium was quantitatively oxidized to Pu(VI) using Ce(IV). The photoacoustic measurement of Pu(VI) with maximum absorption at 830.5 nm was subsequently performed to determine the concentration. The photoacoustic signal was linearly proportional to the Pu(VI) ion concentration. The detection limit of Pu(VI) was estimated to be 0.5 microg mL(-1) (3sigma) in 3 M HNO3. By the proposed method, Pu concentration was successfully determined in a nuclear waste solution for use in nuclear materials management.
Study on the Correlation Between Chlorophyll Maximum and Remote Sensing Data
XIU Peng; LIU Yuguang
2006-01-01
Based on the in situ optical measurements in the Bohai Sea of China, which belongs to a typical case-2 water area, we studied the characteristics of DCM (deep chlorophyll maximum) such as its spatial distribution, vertical profile,etc.We found that when the depth of the chlorophyll maximum is comparatively small, even in turbid coastal water regions,there is always a good correlation between the concentrations of chlorophyll maximum and the satellite-received signals in blue-green spectral bands; the correlation is even better than that between the surface chlorophyll concentrations and the satellite-received signals.The strong correlation existing even in turbid coastal water regions indicates that an ocean color model to retrieve the concentration of DCM can be constructed for coastal waters if a comprehensive knowledge of the vertical distribution of chlorophyll concentration in the Bohai Sea of China is available.
Yu, Hwa-Lung; Wang, Chih-Hsih; Liu, Ming-Che; Kuo, Yi-Ming
2011-06-01
Fine airborne particulate matter (PM2.5) has adverse effects on human health. Assessing the long-term effects of PM2.5 exposure on human health and ecology is often limited by a lack of reliable PM2.5 measurements. In Taipei, PM2.5 levels were not systematically measured until August, 2005. Due to the popularity of geographic information systems (GIS), the landuse regression method has been widely used in the spatial estimation of PM concentrations. This method accounts for the potential contributing factors of the local environment, such as traffic volume. Geostatistical methods, on other hand, account for the spatiotemporal dependence among the observations of ambient pollutants. This study assesses the performance of the landuse regression model for the spatiotemporal estimation of PM2.5 in the Taipei area. Specifically, this study integrates the landuse regression model with the geostatistical approach within the framework of the Bayesian maximum entropy (BME) method. The resulting epistemic framework can assimilate knowledge bases including: (a) empirical-based spatial trends of PM concentration based on landuse regression, (b) the spatio-temporal dependence among PM observation information, and (c) site-specific PM observations. The proposed approach performs the spatiotemporal estimation of PM2.5 levels in the Taipei area (Taiwan) from 2005-2007.
Maximum power operation of interacting molecular motors
Golubeva, Natalia; Imparato, Alberto
2013-01-01
We study the mechanical and thermodynamic properties of different traffic models for kinesin which are relevant in biological and experimental contexts. We find that motor-motor interactions play a fundamental role by enhancing the thermodynamic efficiency at maximum power of the motors......, as compared to the non-interacting system, in a wide range of biologically compatible scenarios. We furthermore consider the case where the motor-motor interaction directly affects the internal chemical cycle and investigate the effect on the system dynamics and thermodynamics....
Maximum a posteriori decoder for digital communications
Altes, Richard A. (Inventor)
1997-01-01
A system and method for decoding by identification of the most likely phase coded signal corresponding to received data. The present invention has particular application to communication with signals that experience spurious random phase perturbations. The generalized estimator-correlator uses a maximum a posteriori (MAP) estimator to generate phase estimates for correlation with incoming data samples and for correlation with mean phases indicative of unique hypothesized signals. The result is a MAP likelihood statistic for each hypothesized transmission, wherein the highest value statistic identifies the transmitted signal.
Kernel-based Maximum Entropy Clustering
JIANG Wei; QU Jiao; LI Benxi
2007-01-01
With the development of Support Vector Machine (SVM),the "kernel method" has been studied in a general way.In this paper,we present a novel Kernel-based Maximum Entropy Clustering algorithm (KMEC).By using mercer kernel functions,the proposed algorithm is firstly map the data from their original space to high dimensional space where the data are expected to be more separable,then perform MEC clustering in the feature space.The experimental results show that the proposed method has better performance in the non-hyperspherical and complex data structure.
The sun and heliosphere at solar maximum.
Smith, E J; Marsden, R G; Balogh, A; Gloeckler, G; Geiss, J; McComas, D J; McKibben, R B; MacDowall, R J; Lanzerotti, L J; Krupp, N; Krueger, H; Landgraf, M
2003-11-14
Recent Ulysses observations from the Sun's equator to the poles reveal fundamental properties of the three-dimensional heliosphere at the maximum in solar activity. The heliospheric magnetic field originates from a magnetic dipole oriented nearly perpendicular to, instead of nearly parallel to, the Sun's rotation axis. Magnetic fields, solar wind, and energetic charged particles from low-latitude sources reach all latitudes, including the polar caps. The very fast high-latitude wind and polar coronal holes disappear and reappear together. Solar wind speed continues to be inversely correlated with coronal temperature. The cosmic ray flux is reduced symmetrically at all latitudes.
Conductivity maximum in a charged colloidal suspension
Bastea, S
2009-01-27
Molecular dynamics simulations of a charged colloidal suspension in the salt-free regime show that the system exhibits an electrical conductivity maximum as a function of colloid charge. We attribute this behavior to two main competing effects: colloid effective charge saturation due to counterion 'condensation' and diffusion slowdown due to the relaxation effect. In agreement with previous observations, we also find that the effective transported charge is larger than the one determined by the Stern layer and suggest that it corresponds to the boundary fluid layer at the surface of the colloidal particles.
Maximum entropy signal restoration with linear programming
Mastin, G.A.; Hanson, R.J.
1988-05-01
Dantzig's bounded-variable method is used to express the maximum entropy restoration problem as a linear programming problem. This is done by approximating the nonlinear objective function with piecewise linear segments, then bounding the variables as a function of the number of segments used. The use of a linear programming approach allows equality constraints found in the traditional Lagrange multiplier method to be relaxed. A robust revised simplex algorithm is used to implement the restoration. Experimental results from 128- and 512-point signal restorations are presented.
Multi-Channel Maximum Likelihood Pitch Estimation
Christensen, Mads Græsbøll
2012-01-01
In this paper, a method for multi-channel pitch estimation is proposed. The method is a maximum likelihood estimator and is based on a parametric model where the signals in the various channels share the same fundamental frequency but can have different amplitudes, phases, and noise characteristics....... This essentially means that the model allows for different conditions in the various channels, like different signal-to-noise ratios, microphone characteristics and reverberation. Moreover, the method does not assume that a certain array structure is used but rather relies on a more general model and is hence...
Maximum entropy PDF projection: A review
Baggenstoss, Paul M.
2017-06-01
We review maximum entropy (MaxEnt) PDF projection, a method with wide potential applications in statistical inference. The method constructs a sampling distribution for a high-dimensional vector x based on knowing the sampling distribution p(z) of a lower-dimensional feature z = T (x). Under mild conditions, the distribution p(x) having highest possible entropy among all distributions consistent with p(z) may be readily found. Furthermore, the MaxEnt p(x) may be sampled, making the approach useful in Monte Carlo methods. We review the theorem and present a case study in model order selection and classification for handwritten character recognition.
CORA: Emission Line Fitting with Maximum Likelihood
Ness, Jan-Uwe; Wichmann, Rainer
2011-12-01
CORA analyzes emission line spectra with low count numbers and fits them to a line using the maximum likelihood technique. CORA uses a rigorous application of Poisson statistics. From the assumption of Poissonian noise, the software derives the probability for a model of the emission line spectrum to represent the measured spectrum. The likelihood function is used as a criterion for optimizing the parameters of the theoretical spectrum and a fixed point equation is derived allowing an efficient way to obtain line fluxes. CORA has been applied to an X-ray spectrum with the Low Energy Transmission Grating Spectrometer (LETGS) on board the Chandra observatory.
Dynamical maximum entropy approach to flocking
Cavagna, Andrea; Giardina, Irene; Ginelli, Francesco; Mora, Thierry; Piovani, Duccio; Tavarone, Raffaele; Walczak, Aleksandra M.
2014-04-01
We derive a new method to infer from data the out-of-equilibrium alignment dynamics of collectively moving animal groups, by considering the maximum entropy model distribution consistent with temporal and spatial correlations of flight direction. When bird neighborhoods evolve rapidly, this dynamical inference correctly learns the parameters of the model, while a static one relying only on the spatial correlations fails. When neighbors change slowly and the detailed balance is satisfied, we recover the static procedure. We demonstrate the validity of the method on simulated data. The approach is applicable to other systems of active matter.
Maximum Temperature Detection System for Integrated Circuits
Frankiewicz, Maciej; Kos, Andrzej
2015-03-01
The paper describes structure and measurement results of the system detecting present maximum temperature on the surface of an integrated circuit. The system consists of the set of proportional to absolute temperature sensors, temperature processing path and a digital part designed in VHDL. Analogue parts of the circuit where designed with full-custom technique. The system is a part of temperature-controlled oscillator circuit - a power management system based on dynamic frequency scaling method. The oscillator cooperates with microprocessor dedicated for thermal experiments. The whole system is implemented in UMC CMOS 0.18 μm (1.8 V) technology.
Zipf's law and maximum sustainable growth
Malevergne, Y; Sornette, D
2010-01-01
Zipf's law states that the number of firms with size greater than S is inversely proportional to S. Most explanations start with Gibrat's rule of proportional growth but require additional constraints. We show that Gibrat's rule, at all firm levels, yields Zipf's law under a balance condition between the effective growth rate of incumbent firms (which includes their possible demise) and the growth rate of investments in entrant firms. Remarkably, Zipf's law is the signature of the long-term optimal allocation of resources that ensures the maximum sustainable growth rate of an economy.
2010-01-01
... 7 Agriculture 15 2010-01-01 2010-01-01 false Loan limits. 4274.331 Section 4274.331 Agriculture... (IRP) § 4274.331 Loan limits. (a) Intermediary. (1) No loan to an intermediary will exceed the maximum... be used for loans to ultimate recipients that exceed $150,000. This limit does not apply to...
Pier A Mello; Eugene Kogan
2002-02-01
We present a maximum-entropy model for the transport of waves through a classically chaotic cavity in the presence of absorption. The entropy of the -matrix statistical distribution is maximized, with the constraint $\\langle {\\rm Tr}SS^{\\dagger}\\rangle = n: n$ is the dimensionality of , and 0 ≤ ≤ 1. For = 1 the -matrix distribution concentrates on the unitarity sphere and we have no absorption; for = 0 the distribution becomes a delta function at the origin and we have complete absorption. For strong absorption our result agrees with a number of analytical calculations already given in the literature. In that limit, the distribution of the individual (angular) transmission and reﬂection coefﬁcients becomes exponential – Rayleigh statistics – even for = 1. For ≫ 1 Rayleigh statistics is attained even with no absorption; here we extend the study to < 1. The model is compared with random-matrix-theory numerical simulations: it describes the problem very well for strong absorption, but fails for moderate and weak absorptions. The success of the model for strong absorption is understood in the light of a central-limit theorem. For weak absorption, some important physical constraint is missing in the construction of the model.
X. Gong
2014-06-01
Full Text Available A bell-shape vertical profile of chlorophyll a (Chl a concentration, conventionally referred as Subsurface Chlorophyll Maximum (SCM phenomenon, has frequently been observed in stratified oceans and lakes. This profile is assumed to be a general Gaussian distribution in this study. By substituting the general Gaussian function into ecosystem dynamical equations, the steady-state solutions for SCM characteristics (i.e. SCM layer depth, thickness, and intensity in various scenarios are derived. These solutions indicate that: (1 The maximum in Chl a concentrations occurs at or below the depth with the maximum in growth rates of phytoplankton locating at the transition from nutrient limitation to light limitation, and the depth of SCM layer deepens logarithmically with an increase in surface light intensity; (2 The shape of SCM layer (thickness and intensity is mainly influenced by nutrient supply, but independence of surface light intensity; (3 The intensity of SCM layer is proportional to the diffusive flux of nutrient from below, getting stronger as a result of this layer being shrank by a higher light attenuation coefficient or a larger sinking velocity of phytoplankton. The analytical solutions can be useful to estimate environmental parameters difficultly obtained from on-site observations.
Antfolk, Jan
2017-03-01
Whereas women of all ages prefer slightly older sexual partners, men-regardless of their age-have a preference for women in their 20s. Earlier research has suggested that this difference between the sexes' age preferences is resolved according to women's preferences. This research has not, however, sufficiently considered that the age range of considered partners might change over the life span. Here we investigated the age limits (youngest and oldest) of considered and actual sex partners in a population-based sample of 2,655 adults (aged 18-50 years). Over the investigated age span, women reported a narrower age range than men and women tended to prefer slightly older men. We also show that men's age range widens as they get older: While they continue to consider sex with young women, men also consider sex with women their own age or older. Contrary to earlier suggestions, men's sexual activity thus reflects also their own age range, although their potential interest in younger women is not likely converted into sexual activity. Compared to homosexual men, bisexual and heterosexual men were more unlikely to convert young preferences into actual behavior, supporting female-choice theory.
Accurate structural correlations from maximum likelihood superpositions.
Douglas L Theobald
2008-02-01
Full Text Available The cores of globular proteins are densely packed, resulting in complicated networks of structural interactions. These interactions in turn give rise to dynamic structural correlations over a wide range of time scales. Accurate analysis of these complex correlations is crucial for understanding biomolecular mechanisms and for relating structure to function. Here we report a highly accurate technique for inferring the major modes of structural correlation in macromolecules using likelihood-based statistical analysis of sets of structures. This method is generally applicable to any ensemble of related molecules, including families of nuclear magnetic resonance (NMR models, different crystal forms of a protein, and structural alignments of homologous proteins, as well as molecular dynamics trajectories. Dominant modes of structural correlation are determined using principal components analysis (PCA of the maximum likelihood estimate of the correlation matrix. The correlations we identify are inherently independent of the statistical uncertainty and dynamic heterogeneity associated with the structural coordinates. We additionally present an easily interpretable method ("PCA plots" for displaying these positional correlations by color-coding them onto a macromolecular structure. Maximum likelihood PCA of structural superpositions, and the structural PCA plots that illustrate the results, will facilitate the accurate determination of dynamic structural correlations analyzed in diverse fields of structural biology.
Maximum entropy production and the fluctuation theorem
Dewar, R C [Unite EPHYSE, INRA Centre de Bordeaux-Aquitaine, BP 81, 33883 Villenave d' Ornon Cedex (France)
2005-05-27
Recently the author used an information theoretical formulation of non-equilibrium statistical mechanics (MaxEnt) to derive the fluctuation theorem (FT) concerning the probability of second law violating phase-space paths. A less rigorous argument leading to the variational principle of maximum entropy production (MEP) was also given. Here a more rigorous and general mathematical derivation of MEP from MaxEnt is presented, and the relationship between MEP and the FT is thereby clarified. Specifically, it is shown that the FT allows a general orthogonality property of maximum information entropy to be extended to entropy production itself, from which MEP then follows. The new derivation highlights MEP and the FT as generic properties of MaxEnt probability distributions involving anti-symmetric constraints, independently of any physical interpretation. Physically, MEP applies to the entropy production of those macroscopic fluxes that are free to vary under the imposed constraints, and corresponds to selection of the most probable macroscopic flux configuration. In special cases MaxEnt also leads to various upper bound transport principles. The relationship between MaxEnt and previous theories of irreversible processes due to Onsager, Prigogine and Ziegler is also clarified in the light of these results. (letter to the editor)
Thermodynamic hardness and the maximum hardness principle
Franco-Pérez, Marco; Gázquez, José L.; Ayers, Paul W.; Vela, Alberto
2017-08-01
An alternative definition of hardness (called the thermodynamic hardness) within the grand canonical ensemble formalism is proposed in terms of the partial derivative of the electronic chemical potential with respect to the thermodynamic chemical potential of the reservoir, keeping the temperature and the external potential constant. This temperature dependent definition may be interpreted as a measure of the propensity of a system to go through a charge transfer process when it interacts with other species, and thus it keeps the philosophy of the original definition. When the derivative is expressed in terms of the three-state ensemble model, in the regime of low temperatures and up to temperatures of chemical interest, one finds that for zero fractional charge, the thermodynamic hardness is proportional to T-1(I -A ) , where I is the first ionization potential, A is the electron affinity, and T is the temperature. However, the thermodynamic hardness is nearly zero when the fractional charge is different from zero. Thus, through the present definition, one avoids the presence of the Dirac delta function. We show that the chemical hardness defined in this way provides meaningful and discernible information about the hardness properties of a chemical species exhibiting integer or a fractional average number of electrons, and this analysis allowed us to establish a link between the maximum possible value of the hardness here defined, with the minimum softness principle, showing that both principles are related to minimum fractional charge and maximum stability conditions.
Maximum Likelihood Analysis in the PEN Experiment
Lehman, Martin
2013-10-01
The experimental determination of the π+ -->e+ ν (γ) decay branching ratio currently provides the most accurate test of lepton universality. The PEN experiment at PSI, Switzerland, aims to improve the present world average experimental precision of 3 . 3 ×10-3 to 5 ×10-4 using a stopped beam approach. During runs in 2008-10, PEN has acquired over 2 ×107 πe 2 events. The experiment includes active beam detectors (degrader, mini TPC, target), central MWPC tracking with plastic scintillator hodoscopes, and a spherical pure CsI electromagnetic shower calorimeter. The final branching ratio will be calculated using a maximum likelihood analysis. This analysis assigns each event a probability for 5 processes (π+ -->e+ ν , π+ -->μ+ ν , decay-in-flight, pile-up, and hadronic events) using Monte Carlo verified probability distribution functions of our observables (energies, times, etc). A progress report on the PEN maximum likelihood analysis will be presented. Work supported by NSF grant PHY-0970013.
47 CFR 74.735 - Power limitations.
2010-10-01
... larger ERP. Applications proposing the use of directional antenna systems must be accompanied by the... Booster Stations § 74.735 Power limitations. (a) The maximum peak effective radiated power (ERP) of an...-13; and (2) 150 kW for UHF channels 14-69. (b) The maximum ERP of a digital low power TV,...
Sullivan, T. [Brookhaven National Lab. (BNL), Upton, NY (United States)
2016-05-20
ZionSolutions is in the process of decommissioning the Zion Nuclear Power Station (ZNPS). After decommissioning is completed, the site will contain two reactor Containment Buildings, the Fuel Handling Building and Transfer Canals, Auxiliary Building, Turbine Building, Crib House/Forebay, and a Waste Water Treatment Facility that have been demolished to a depth of 3 feet below grade. Additional below ground structures remaining will include the Main Steam Tunnels and large diameter intake and discharge pipes. These additional structures are not included in the modeling described in this report but the inventory remaining (expected to be very low) will be included with one of the structures that are modeled as designated in the Zion Station Restoration Project (ZSRP) License Termination Plan (LTP). The remaining underground structures will be backfilled with clean material. The final selection of fill material has not been made.
Lake Basin Fetch and Maximum Length/Width
Minnesota Department of Natural Resources — Linear features representing the Fetch, Maximum Length and Maximum Width of a lake basin. Fetch, maximum length and average width are calcuated from the lake polygon...
Fundamental Limits of Ultrathin Metasurfaces
Arbabi, Amir
2014-01-01
We present universal theoretical limits on the operation and performance of non-magnetic passive ultrathin metasurfaces. In particular, we prove that their local transmission, reflection, and polarization conversion coefficients are confined to limited regions of the complex plane. As a result, full control over the phase of the light transmitted through such metasurfaces cannot be achieved if the polarization of the light is not to be affected at the same time. We also establish fundamental limits on the maximum polarization conversion efficiency of these metasurfaces, and show that they cannot achieve more than 25% polarization conversion efficiency in transmission.
Efficiency at maximum power of a discrete feedback ratchet
Jarillo, Javier; Tangarife, Tomás; Cao, Francisco J.
2016-01-01
Efficiency at maximum power is found to be of the same order for a feedback ratchet and for its open-loop counterpart. However, feedback increases the output power up to a factor of five. This increase in output power is due to the increase in energy input and the effective entropy reduction obtained as a consequence of feedback. Optimal efficiency at maximum power is reached for time intervals between feedback actions two orders of magnitude smaller than the characteristic time of diffusion over a ratchet period length. The efficiency is computed consistently taking into account the correlation between the control actions. We consider a feedback control protocol for a discrete feedback flashing ratchet, which works against an external load. We maximize the power output optimizing the parameters of the ratchet, the controller, and the external load. The maximum power output is found to be upper bounded, so the attainable extracted power is limited. After, we compute an upper bound for the efficiency of this isothermal feedback ratchet at maximum power output. We make this computation applying recent developments of the thermodynamics of feedback-controlled systems, which give an equation to compute the entropy reduction due to information. However, this equation requires the computation of the probability of each of the possible sequences of the controller's actions. This computation becomes involved when the sequence of the controller's actions is non-Markovian, as is the case in most feedback ratchets. We here introduce an alternative procedure to set strong bounds to the entropy reduction in order to compute its value. In this procedure the bounds are evaluated in a quasi-Markovian limit, which emerge when there are big differences between the stationary probabilities of the system states. These big differences are an effect of the potential strength, which minimizes the departures from the Markovianicity of the sequence of control actions, allowing also to
47 CFR 22.627 - Effective radiated power limits.
2010-10-01
... radiated power limits. The effective radiated power (ERP) of transmitters operating on the channels listed in § 22.621 must not exceed the limits in this section. (a) Maximum ERP. The ERP must not exceed the applicable limits in this paragraph under any circumstances. Frequency range (MHz) Maximum ERP (watts)...
47 CFR 22.535 - Effective radiated power limits.
2010-10-01
... limits. The effective radiated power (ERP) of transmitters operating on the channels listed in § 22.531 must not exceed the limits in this section. (a) Maximum ERP. The ERP must not exceed the applicable limits in this paragraph under any circumstances. Frequency range (MHz) Maximum ERP (Watts) 35-36 600...
Maximum entropy principle and texture formation
Arminjon, M; Arminjon, Mayeul; Imbault, Didier
2006-01-01
The macro-to-micro transition in a heterogeneous material is envisaged as the selection of a probability distribution by the Principle of Maximum Entropy (MAXENT). The material is made of constituents, e.g. given crystal orientations. Each constituent is itself made of a large number of elementary constituents. The relevant probability is the volume fraction of the elementary constituents that belong to a given constituent and undergo a given stimulus. Assuming only obvious constraints in MAXENT means describing a maximally disordered material. This is proved to have the same average stimulus in each constituent. By adding a constraint in MAXENT, a new model, potentially interesting e.g. for texture prediction, is obtained.
MLDS: Maximum Likelihood Difference Scaling in R
Kenneth Knoblauch
2008-01-01
Full Text Available The MLDS package in the R programming language can be used to estimate perceptual scales based on the results of psychophysical experiments using the method of difference scaling. In a difference scaling experiment, observers compare two supra-threshold differences (a,b and (c,d on each trial. The approach is based on a stochastic model of how the observer decides which perceptual difference (or interval (a,b or (c,d is greater, and the parameters of the model are estimated using a maximum likelihood criterion. We also propose a method to test the model by evaluating the self-consistency of the estimated scale. The package includes an example in which an observer judges the differences in correlation between scatterplots. The example may be readily adapted to estimate perceptual scales for arbitrary physical continua.
Maximum Profit Configurations of Commercial Engines
Yiran Chen
2011-06-01
Full Text Available An investigation of commercial engines with finite capacity low- and high-price economic subsystems and a generalized commodity transfer law [n ∝ Δ (P m] in commodity flow processes, in which effects of the price elasticities of supply and demand are introduced, is presented in this paper. Optimal cycle configurations of commercial engines for maximum profit are obtained by applying optimal control theory. In some special cases, the eventual state—market equilibrium—is solely determined by the initial conditions and the inherent characteristics of two subsystems; while the different ways of transfer affect the model in respects of the specific forms of the paths of prices and the instantaneous commodity flow, i.e., the optimal configuration.
Maximum Segment Sum, Monadically (distilled tutorial
Jeremy Gibbons
2011-09-01
Full Text Available The maximum segment sum problem is to compute, given a list of integers, the largest of the sums of the contiguous segments of that list. This problem specification maps directly onto a cubic-time algorithm; however, there is a very elegant linear-time solution too. The problem is a classic exercise in the mathematics of program construction, illustrating important principles such as calculational development, pointfree reasoning, algebraic structure, and datatype-genericity. Here, we take a sideways look at the datatype-generic version of the problem in terms of monadic functional programming, instead of the traditional relational approach; the presentation is tutorial in style, and leavened with exercises for the reader.
Maximum Information and Quantum Prediction Algorithms
McElwaine, J N
1997-01-01
This paper describes an algorithm for selecting a consistent set within the consistent histories approach to quantum mechanics and investigates its properties. The algorithm uses a maximum information principle to select from among the consistent sets formed by projections defined by the Schmidt decomposition. The algorithm unconditionally predicts the possible events in closed quantum systems and ascribes probabilities to these events. A simple spin model is described and a complete classification of all exactly consistent sets of histories formed from Schmidt projections in the model is proved. This result is used to show that for this example the algorithm selects a physically realistic set. Other tentative suggestions in the literature for set selection algorithms using ideas from information theory are discussed.
Maximum process problems in optimal control theory
Goran Peskir
2005-01-01
Full Text Available Given a standard Brownian motion (Btt≥0 and the equation of motion dXt=vtdt+2dBt, we set St=max0≤s≤tXs and consider the optimal control problem supvE(Sτ−Cτ, where c>0 and the supremum is taken over all admissible controls v satisfying vt∈[μ0,μ1] for all t up to τ=inf{t>0|Xt∉(ℓ0,ℓ1} with μ0g∗(St, where s↦g∗(s is a switching curve that is determined explicitly (as the unique solution to a nonlinear differential equation. The solution found demonstrates that the problem formulations based on a maximum functional can be successfully included in optimal control theory (calculus of variations in addition to the classic problem formulations due to Lagrange, Mayer, and Bolza.
Maximum entropy model for business cycle synchronization
Xi, Ning; Muneepeerakul, Rachata; Azaele, Sandro; Wang, Yougui
2014-11-01
The global economy is a complex dynamical system, whose cyclical fluctuations can mainly be characterized by simultaneous recessions or expansions of major economies. Thus, the researches on the synchronization phenomenon are key to understanding and controlling the dynamics of the global economy. Based on a pairwise maximum entropy model, we analyze the business cycle synchronization of the G7 economic system. We obtain a pairwise-interaction network, which exhibits certain clustering structure and accounts for 45% of the entire structure of the interactions within the G7 system. We also find that the pairwise interactions become increasingly inadequate in capturing the synchronization as the size of economic system grows. Thus, higher-order interactions must be taken into account when investigating behaviors of large economic systems.
Quantum gravity momentum representation and maximum energy
Moffat, J. W.
2016-11-01
We use the idea of the symmetry between the spacetime coordinates xμ and the energy-momentum pμ in quantum theory to construct a momentum space quantum gravity geometry with a metric sμν and a curvature tensor Pλ μνρ. For a closed maximally symmetric momentum space with a constant 3-curvature, the volume of the p-space admits a cutoff with an invariant maximum momentum a. A Wheeler-DeWitt-type wave equation is obtained in the momentum space representation. The vacuum energy density and the self-energy of a charged particle are shown to be finite, and modifications of the electromagnetic radiation density and the entropy density of a system of particles occur for high frequencies.
Video segmentation using Maximum Entropy Model
QIN Li-juan; ZHUANG Yue-ting; PAN Yun-he; WU Fei
2005-01-01
Detecting objects of interest from a video sequence is a fundamental and critical task in automated visual surveillance.Most current approaches only focus on discriminating moving objects by background subtraction whether or not the objects of interest can be moving or stationary. In this paper, we propose layers segmentation to detect both moving and stationary target objects from surveillance video. We extend the Maximum Entropy (ME) statistical model to segment layers with features, which are collected by constructing a codebook with a set of codewords for each pixel. We also indicate how the training models are used for the discrimination of target objects in surveillance video. Our experimental results are presented in terms of the success rate and the segmenting precision.
Valeri Lenin
2011-03-01
Full Text Available Objectives. To investigate whether lifestyle-only intervention in obese children who maintain or lose a modest amount of weight redistributes parameters of body composition and reverses metabolic abnormalities. Study Design. Clinical, anthropometric, and metabolic parameters were assessed in 111 overweight or obese children (CA of 11.3 ± 2.8 years; 63 females and 48 males, during 8 months of lifestyle intervention. Patients maintained or lost weight (1–5% (group A; n: 72 or gained weight (group B. Results. Group A patients presented with a decrease in systolic blood pressure (SBP and diastolic blood pressure (DBP ( and , resp., BMI (, z-score BMI (, waist circumference (, fat mass (, LDL-C (, Tg/HDL-C ratio (, fasting and postprandial insulin (, and HOMA (, while HDL-C ( and QUICKI increased (. Conversely, group B patients had an increase in BMI (, waist circumference (, SBP (, and in QUICKI (, while fat mass (, fasting insulin (, and HOMA ( decreased. Lean mass, DBP, lipid concentrations, fasting and postprandial glucose, postprandial insulin, and ultrasensitive C-reactive protein (CRP remained stable. Conclusions. Obese children who maintain or lose a modest amount of weight following lifestyle-only intervention tend to redistribute their body fat, decrease blood pressure and lipid levels, and to improve parameters of insulin sensitivity.
BINDER DRAINAGE TEST FOR POROUS MIXTURES MADE BY VARYING THE MAXIMUM AGGREGATE SIZES
Hardiman Hardiman
2004-01-01
Full Text Available Binder drainage occurs with mixes of small aggregate surface area particularly porous asphalt. The binder drainage test, developed by the Transport Research Laboratory, UK, is commonly used to set an upper limit on the acceptable binder content for a porous mix. This paper presents the results of a laboratory investigation to determine the effects of different binder types on the binder drainage characteristics of porous mix made of various maximum aggregate sizes 20, 14 and 10 mm. Two types of binder were used, conventional 60/70 pen bitumen, and styrene butadiene styrene (SBS modified bitumen. The amount of binder lost through drainage after three hours at the maximum mixing temperature were measured in duplicate for mixes of different maximum sizes and binder contents. The maximum mixing temperature adopted depends on the types of binder used. The retained binder is plotted against the initial mixed binder content, together with the line of equality where the retained binder equals the mixed binder content. The results indicate the significant contribution of using SBS modified bitumen to increase the target bitumen binder content. Their significance is discussed in terms of target binder content, the critical binder content, the maximum mixed binder content and the maximum retained binder content values obtained from the binder drainage test. It was concluded that increasing maximum aggregate sizes decrease the maximum retained binder content, critical binder content, target binder content, maximum mixed binder content, and mixed content for both binders, but however for all mixtures, SBS is the highest.
Evaluation of pliers' grip spans in the maximum gripping task and sub-maximum cutting task.
Kim, Dae-Min; Kong, Yong-Ku
2016-12-01
A total of 25 males participated to investigate the effects of the grip spans of pliers on the total grip force, individual finger forces and muscle activities in the maximum gripping task and wire-cutting tasks. In the maximum gripping task, results showed that the 50-mm grip span had significantly higher total grip strength than the other grip spans. In the cutting task, the 50-mm grip span also showed significantly higher grip strength than the 65-mm and 80-mm grip spans, whereas the muscle activities showed a higher value at 80-mm grip span. The ratios of cutting force to maximum grip strength were also investigated. Ratios of 30.3%, 31.3% and 41.3% were obtained by grip spans of 50-mm, 65-mm, and 80-mm, respectively. Thus, the 50-mm grip span for pliers might be recommended to provide maximum exertion in gripping tasks, as well as lower maximum-cutting force ratios in the cutting tasks.
Cosmic shear measurement with maximum likelihood and maximum a posteriori inference
Hall, Alex
2016-01-01
We investigate the problem of noise bias in maximum likelihood and maximum a posteriori estimators for cosmic shear. We derive the leading and next-to-leading order biases and compute them in the context of galaxy ellipticity measurements, extending previous work on maximum likelihood inference for weak lensing. We show that a large part of the bias on these point estimators can be removed using information already contained in the likelihood when a galaxy model is specified, without the need for external calibration. We test these bias-corrected estimators on simulated galaxy images similar to those expected from planned space-based weak lensing surveys, with very promising results. We find that the introduction of an intrinsic shape prior mitigates noise bias, such that the maximum a posteriori estimate can be made less biased than the maximum likelihood estimate. Second-order terms offer a check on the convergence of the estimators, but are largely sub-dominant. We show how biases propagate to shear estima...
Fundamental gravitational limitations to quantum computing
Gambini, R; Pullin, J; Gambini, Rodolfo; Porto, Rafael A.; Pullin, Jorge
2005-01-01
Lloyd has considered the ultimate limitations physics places on quantum computers. He concludes in particular that for an ``ultimate laptop'' (a computer of one liter of volume and one kilogram of mass) the maximum number of operations per second is bounded by $10^{51}$. The limit is derived considering ordinary quantum mechanics. Here we consider additional limits that are placed by quantum gravity ideas, namely the use of a relational notion of time and fundamental gravitational limits that exist on time measurements. We then particularize for the case of an ultimate laptop and show that the maximum number of operations is further constrained to $10^{47}$ per second.
Excess Surface Area in Bioelectrochemical Systems Causes ion Transport Limitations
Harrington, Timothy D.; Babauta, Jerome T.; Davenport, Emily K.; Renslow, Ryan S.; Beyenal, Haluk
2015-05-01
We investigated ion transport limitations on 3D graphite felt electrodes by growing Geobacter sulfurreducens biofilms with advection to eliminate external mass transfer limitations. We characterized ion transport limitations by: (i) showing that serially increasing NaCl concentration up to 200mM increased current linearly up to a total of þ273% vs. 0mM NaCl under advective conditions; (ii) growing the biofilm with a starting concentration of 200mM NaCl, which led to a maximum current increase of 400% vs. current generation without NaCl, and (iii) showing that un-colonized surface area remained even after steadystate current was reached. After accounting for iR effects, we confirmed that the excess surface area existed despite a non-zero overpotential. The fact that the biofilm was constrained from colonizing and producing further current under these conditions confirmed the biofilms under study here were ion transport-limited. Our work demonstrates that the use of high surface area electrodes may not increase current density when the system design allows ion transport limitations to become dominant.
Modelling the maximum voluntary joint torque/angular velocity relationship in human movement.
Yeadon, Maurice R; King, Mark A; Wilson, Cassie
2006-01-01
The force exerted by a muscle is a function of the activation level and the maximum (tetanic) muscle force. In "maximum" voluntary knee extensions muscle activation is lower for eccentric muscle velocities than for concentric velocities. The aim of this study was to model this "differential activation" in order to calculate the maximum voluntary knee extensor torque as a function of knee angular velocity. Torque data were collected on two subjects during maximal eccentric-concentric knee extensions using an isovelocity dynamometer with crank angular velocities ranging from 50 to 450 degrees s(-1). The theoretical tetanic torque/angular velocity relationship was modelled using a four parameter function comprising two rectangular hyperbolas while the activation/angular velocity relationship was modelled using a three parameter function that rose from submaximal activation for eccentric velocities to full activation for high concentric velocities. The product of these two functions gave a seven parameter function which was fitted to the joint torque/angular velocity data, giving unbiased root mean square differences of 1.9% and 3.3% of the maximum torques achieved. Differential activation accounts for the non-hyperbolic behaviour of the torque/angular velocity data for low concentric velocities. The maximum voluntary knee extensor torque that can be exerted may be modelled accurately as the product of functions defining the maximum torque and the maximum voluntary activation level. Failure to include differential activation considerations when modelling maximal movements will lead to errors in the estimation of joint torque in the eccentric phase and low velocity concentric phase.
Unification of Field Theory and Maximum Entropy Methods for Learning Probability Densities
Kinney, Justin B
2014-01-01
Bayesian field theory and maximum entropy are two methods for learning smooth probability distributions (a.k.a. probability densities) from finite sampled data. Both methods were inspired by statistical physics, but the relationship between them has remained unclear. Here I show that Bayesian field theory subsumes maximum entropy density estimation. In particular, the most common maximum entropy methods are shown to be limiting cases of Bayesian inference using field theory priors that impose no boundary conditions on candidate densities. This unification provides a natural way to test the validity of the maximum entropy assumption on one's data. It also provides a better-fitting nonparametric density estimate when the maximum entropy assumption is rejected.
An Integrated Modeling Framework for Probable Maximum Precipitation and Flood
Gangrade, S.; Rastogi, D.; Kao, S. C.; Ashfaq, M.; Naz, B. S.; Kabela, E.; Anantharaj, V. G.; Singh, N.; Preston, B. L.; Mei, R.
2015-12-01
With the increasing frequency and magnitude of extreme precipitation and flood events projected in the future climate, there is a strong need to enhance our modeling capabilities to assess the potential risks on critical energy-water infrastructures such as major dams and nuclear power plants. In this study, an integrated modeling framework is developed through high performance computing to investigate the climate change effects on probable maximum precipitation (PMP) and probable maximum flood (PMF). Multiple historical storms from 1981-2012 over the Alabama-Coosa-Tallapoosa River Basin near the Atlanta metropolitan area are simulated by the Weather Research and Forecasting (WRF) model using the Climate Forecast System Reanalysis (CFSR) forcings. After further WRF model tuning, these storms are used to simulate PMP through moisture maximization at initial and lateral boundaries. A high resolution hydrological model, Distributed Hydrology-Soil-Vegetation Model, implemented at 90m resolution and calibrated by the U.S. Geological Survey streamflow observations, is then used to simulate the corresponding PMF. In addition to the control simulation that is driven by CFSR, multiple storms from the Community Climate System Model version 4 under the Representative Concentrations Pathway 8.5 emission scenario are used to simulate PMP and PMF in the projected future climate conditions. The multiple PMF scenarios developed through this integrated modeling framework may be utilized to evaluate the vulnerability of existing energy-water infrastructures with various aspects associated PMP and PMF.
Experiments in optimizing simulations of the subsurface chlorophyll maximum in the South China Sea
Wang, Siying; Li, Shiyu; Hu, Jiatang; Geng, Bingxu
2016-04-01
The subsurface chlorophyll maximum (SCM) is widespread in the oligotrophic ocean and significantly contributes to primary production. One reason for the SCM formation is believed to be the rapid export of phytoplankton from surface layers, which might be caused by aggregation, faster sinking rates under nutrient limitation, or the formation of a resting stage. In this study, these three processes were included in a biological model to investigate their contributions to subsurface chlorophyll. To further identify their individual effects on SCM formation, four modeling experiments were carried out. Three used a simple approach with either (a) density-dependent aggregation, (b) accelerated sinking rate of phytoplankton, or (c) a resting stage. The other experiment combined all three approaches (a-c). A set of observations in the South China Sea was used to optimize the four experiments and compare their abilities to replicate observed values. The results of the experiments with the resting stage showed the best fit to the field observations. All experiments were able to capture major features of the chlorophyll field (e.g. surface bloom and SCM). The experiment with accelerated sinking rate failed to reproduce the observed profile of particulate organic carbon. The experiment with only aggregation predicted lower chlorophyll concentrations in summer than those measured in the field, while experiments with the resting stage reproduced more accurate chlorophyll concentrations. Formulas including the resting stage more successfully captured the timing of phytoplankton export than did those including aggregation and accelerated sinking rate. The processes of aggregation and accelerated sinking rate made small contributions to the SCM formation in the last experiment. Overall, these results show that introducing the resting stage improves SCM simulations of the South China Sea. The results of the experiment with only the resting stage showed that the resting cells shift
Effective soil hydraulic conductivity predicted with the maximum power principle
Westhoff, Martijn; Erpicum, Sébastien; Archambeau, Pierre; Pirotton, Michel; Zehe, Erwin; Dewals, Benjamin
2016-04-01
Drainage of water in soils happens for a large extent through preferential flowpaths, but these subsurface flowpaths are extremely difficult to observe or parameterize in hydrological models. To potentially overcome this problem, thermodynamic optimality principles have been suggested to predict effective parametrization of these (sub-grid) structures, such as the maximum entropy production principle or the equivalent maximum power principle. These principles have been successfully applied to predict heat transfer from the Equator to the Poles, or turbulent heat fluxes between the surface and the atmosphere. In these examples, the effective flux adapts itself to its boundary condition by adapting its effective conductance through the creation of e.g. convection cells. However, flow through porous media, such as soils, can only quickly adapt its effective flow conductance by creation of preferential flowpaths, but it is unknown if this is guided by the aim to create maximum power. Here we show experimentally that this is indeed the case: In the lab, we created a hydrological analogue to the atmospheric model dealing with heat transport between Equator and poles. The experimental setup consists of two freely draining reservoirs connected with each other by a confined aquifer. By adding water to only one reservoir, a potential difference will build up until a steady state is reached. From the steady state potential difference and the observed flow through the aquifer, and effective hydraulic conductance can be determined. This observed conductance does correspond to the one maximizing power of the flux through the confined aquifer. Although this experiment is done in an idealized setting, it opens doors for better parameterizing hydrological models. Furthermore, it shows that hydraulic properties of soils are not static, but they change with changing boundary conditions. A potential limitation to the principle is that it only applies to steady state conditions
Analytical maximum likelihood estimation of stellar magnetic fields
González, M J Martínez; Ramos, A Asensio; Belluzzi, L
2011-01-01
The polarised spectrum of stellar radiation encodes valuable information on the conditions of stellar atmospheres and the magnetic fields that permeate them. In this paper, we give explicit expressions to estimate the magnetic field vector and its associated error from the observed Stokes parameters. We study the solar case where specific intensities are observed and then the stellar case, where we receive the polarised flux. In this second case, we concentrate on the explicit expression for the case of a slow rotator with a dipolar magnetic field geometry. Moreover, we also give explicit formulae to retrieve the magnetic field vector from the LSD profiles without assuming mean values for the LSD artificial spectral line. The formulae have been obtained assuming that the spectral lines can be described in the weak field regime and using a maximum likelihood approach. The errors are recovered by means of the hermitian matrix. The bias of the estimators are analysed in depth.
Dorneles, Paulo R. [Laboratorio de Radioisotopos Eduardo Penna Franca, Instituto de Biofisica Carlos Chagas Filho, CCS, Universidade Federal do Rio de Janeiro (Brazil); Laboratorio de Mamiferos Aquaticos (MAQUA), Faculdade de Oceanografia, Universidade do Estado do Rio de Janeiro (Brazil)], E-mail: dornelespr@gmail.com; Lailson-Brito, Jose [Laboratorio de Radioisotopos Eduardo Penna Franca, Instituto de Biofisica Carlos Chagas Filho, CCS, Universidade Federal do Rio de Janeiro (Brazil); Laboratorio de Mamiferos Aquaticos (MAQUA), Faculdade de Oceanografia, Universidade do Estado do Rio de Janeiro (Brazil)], E-mail: lailson@uerj.br; Fernandez, Marcos A.S. [Laboratorio de Oceanografia Quimica, Faculdade de Oceanografia, Universidade do Estado do Rio de Janeiro (Brazil)], E-mail: hallfz@uerj.br; Vidal, Lara G. [Laboratorio de Mamiferos Aquaticos (MAQUA), Faculdade de Oceanografia, Universidade do Estado do Rio de Janeiro (Brazil)], E-mail: vidallara@yahoo.com.br; Barbosa, Lupercio A. [Instituto ORCA, Vila Velha, ES (Brazil)], E-mail: lupercio@orca.org.br; Azevedo, Alexandre F. [Laboratorio de Mamiferos Aquaticos (MAQUA), Faculdade de Oceanografia, Universidade do Estado do Rio de Janeiro (Brazil)], E-mail: alexandre.maqua@gmail.com; Fragoso, Ana B.L. [Laboratorio de Mamiferos Aquaticos (MAQUA), Faculdade de Oceanografia, Universidade do Estado do Rio de Janeiro (Brazil)], E-mail: abfragoso@gmail.com; Torres, Joao P.M. [Laboratorio de Radioisotopos Eduardo Penna Franca, Instituto de Biofisica Carlos Chagas Filho, CCS, Universidade Federal do Rio de Janeiro (Brazil)], E-mail: jptorres@biof.ufrj.br; Malm, Olaf [Laboratorio de Radioisotopos Eduardo Penna Franca, Instituto de Biofisica Carlos Chagas Filho, CCS, Universidade Federal do Rio de Janeiro (Brazil)], E-mail: olaf@biof.ufrj.br
2008-12-15
In Brazil, there is no restriction to the use of organotins (OTs). Previous investigations have shown that hepatic {sigma}Sn in cetaceans is predominantly organic. Hepatic {sigma}Sn concentrations were determined by GFAAS in 67 cetaceans (13 species) that stranded on Rio de Janeiro (RJ) and Espirito Santo (ES) states. Concentrations (in ng/g wet wt.) of marine tucuxis (n = 20) from the highly contaminated Guanabara Bay (in RJ) varied from 1703 to 9638. Concentrations of three marine tucuxi foetuses and one newborn calf (all from Guanabara Bay) varied between 431 and 2107. Contrastingly, the maximum level among 19 oceanic dolphins was 346, and 15 out of these 19 specimens presented concentrations below detection limit. The levels of Sn in six marine tucuxis from a less contaminated area (ES) varied from below detection limit to 744. Comparing to the literature, coastal cetaceans from Brazil appear to be highly exposed to OTs. - Cetaceans from Brazil are highly exposed to organotin compounds.
Zero-reabsorption doped-nanocrystal luminescent solar concentrators.
Erickson, Christian S; Bradshaw, Liam R; McDowall, Stephen; Gilbertson, John D; Gamelin, Daniel R; Patrick, David L
2014-04-22
Optical concentration can lower the cost of solar energy conversion by reducing photovoltaic cell area and increasing photovoltaic efficiency. Luminescent solar concentrators offer an attractive approach to combined spectral and spatial concentration of both specular and diffuse light without tracking, but they have been plagued by luminophore self-absorption losses when employed on practical size scales. Here, we introduce doped semiconductor nanocrystals as a new class of phosphors for use in luminescent solar concentrators. In proof-of-concept experiments, visibly transparent, ultraviolet-selective luminescent solar concentrators have been prepared using colloidal Mn(2+)-doped ZnSe nanocrystals that show no luminescence reabsorption. Optical quantum efficiencies of 37% are measured, yielding a maximum projected energy concentration of ∼6× and flux gain for a-Si photovoltaics of 15.6 in the large-area limit, for the first time bounded not by luminophore self-absorption but by the transparency of the waveguide itself. Future directions in the use of colloidal doped nanocrystals as robust, processable spectrum-shifting phosphors for luminescent solar concentration on the large scales required for practical application of this technology are discussed.
Maximum entropy production in environmental and ecological systems.
Kleidon, Axel; Malhi, Yadvinder; Cox, Peter M
2010-05-12
The coupled biosphere-atmosphere system entails a vast range of processes at different scales, from ecosystem exchange fluxes of energy, water and carbon to the processes that drive global biogeochemical cycles, atmospheric composition and, ultimately, the planetary energy balance. These processes are generally complex with numerous interactions and feedbacks, and they are irreversible in their nature, thereby producing entropy. The proposed principle of maximum entropy production (MEP), based on statistical mechanics and information theory, states that thermodynamic processes far from thermodynamic equilibrium will adapt to steady states at which they dissipate energy and produce entropy at the maximum possible rate. This issue focuses on the latest development of applications of MEP to the biosphere-atmosphere system including aspects of the atmospheric circulation, the role of clouds, hydrology, vegetation effects, ecosystem exchange of energy and mass, biogeochemical interactions and the Gaia hypothesis. The examples shown in this special issue demonstrate the potential of MEP to contribute to improved understanding and modelling of the biosphere and the wider Earth system, and also explore limitations and constraints to the application of the MEP principle.
Radiation engineering of optical antennas for maximum field enhancement.
Seok, Tae Joon; Jamshidi, Arash; Kim, Myungki; Dhuey, Scott; Lakhani, Amit; Choo, Hyuck; Schuck, Peter James; Cabrini, Stefano; Schwartzberg, Adam M; Bokor, Jeffrey; Yablonovitch, Eli; Wu, Ming C
2011-07-13
Optical antennas have generated much interest in recent years due to their ability to focus optical energy beyond the diffraction limit, benefiting a broad range of applications such as sensitive photodetection, magnetic storage, and surface-enhanced Raman spectroscopy. To achieve the maximum field enhancement for an optical antenna, parameters such as the antenna dimensions, loading conditions, and coupling efficiency have been previously studied. Here, we present a framework, based on coupled-mode theory, to achieve maximum field enhancement in optical antennas through optimization of optical antennas' radiation characteristics. We demonstrate that the optimum condition is achieved when the radiation quality factor (Q(rad)) of optical antennas is matched to their absorption quality factor (Q(abs)). We achieve this condition experimentally by fabricating the optical antennas on a dielectric (SiO(2)) coated ground plane (metal substrate) and controlling the antenna radiation through optimizing the dielectric thickness. The dielectric thickness at which the matching condition occurs is approximately half of the quarter-wavelength thickness, typically used to achieve constructive interference, and leads to ∼20% higher field enhancement relative to a quarter-wavelength thick dielectric layer.
Maximum mass, moment of inertia and compactness of relativistic stars
Breu, Cosima
2016-01-01
A number of recent works have highlighted that it is possible to express the properties of general-relativistic stellar equilibrium configurations in terms of functions that do not depend on the specific equation of state employed to describe matter at nuclear densities. These functions are normally referred to as "universal relations" and have been found to apply, within limits, both to static or stationary isolated stars, as well as to fully dynamical and merging binary systems. Further extending the idea that universal relations can be valid also away from stability, we show that a universal relation is exhibited also by equilibrium solutions that are not stable. In particular, the mass of rotating configurations on the turning-point line shows a universal behaviour when expressed in terms of the normalised Keplerian angular momentum. In turn, this allows us to compute the maximum mass allowed by uniform rotation, M_{max}, simply in terms of the maximum mass of the nonrotating configuration, M_{TOV}, findi...
Maximum Allowable Dynamic Load of Mobile Manipulators with Stability Consideration
Heidary H. R.
2015-09-01
Full Text Available High payload to mass ratio is one of the advantages of mobile robot manipulators. In this paper, a general formula for finding the maximum allowable dynamic load (MADL of wheeled mobile robot is presented. Mobile manipulators operating in field environments will be required to manipulate large loads, and to perform such tasks on uneven terrain, which may cause the system to reach dangerous tip-over instability. Therefore, the method is expanded for finding the MADL of mobile manipulators with stability consideration. Moment-Height Stability (MHS criterion is used as an index for the system stability. Full dynamic model of wheeled mobile base and mounted manipulator is considered with respect to the dynamic of non-holonomic constraint. Then, a method for determination of the maximum allowable loads is described, subject to actuator constraints and by imposing the stability limitation as a new constraint. The actuator torque constraint is applied by using a speed-torque characteristics curve of a typical DC motor. In order to verify the effectiveness of the presented algorithm, several simulation studies considering a two-link planar manipulator, mounted on a mobile base are presented and the results are discussed.
Export production in the New-Zealand region since the Last Glacial Maximum
Durand, Axel; Chase, Zanna; Noble, Taryn L.; Bostock, Helen; Jaccard, Samuel L.; Kitchener, Priya; Townsend, Ashley T.; Jansen, Nils; Kinsley, Les; Jacobsen, Geraldine; Johnson, Sean; Neil, Helen
2017-07-01
Increased export production (EP) in the Subantarctic Zone (SAZ) of the Southern Ocean due to iron fertilisation has been proposed as a key mechanism for explaining carbon drawdown during the last glacial maximum (LGM). This work reconstructs marine EP since the LGM at four sites around New Zealand. For the first time in this region, 230-Thorium-normalised fluxes of biogenic opal, carbonate, excess barium, and organic carbon are presented. In Subtropical Waters and the SAZ, these flux variations show that EP has not changed markedly since the LGM. The only exception is a site currently north of the subtropical front. Here we suggest the subtropical front shifted over the core site between 18 and 12 ka, driving increased EP. To understand why EP remained mostly low and constant elsewhere, lithogenic fluxes at the four sites were measured to investigate changes in dust deposition. At all sites, lithogenic fluxes were greater during the LGM compared to the Holocene. The positive temporal correlation between the Antarctic dust record and lithogenic flux at a site in the Tasman Sea shows that regionally, increased dust deposition contributed to the high glacial lithogenic fluxes. Additionally, it is inferred that lithogenic material from erosion and glacier melting deposited on the Campbell Plateau during the deglaciation (18-12 ka). From these observations, it is proposed that even though increased glacial dust deposition may have relieved iron limitation within the SAZ around New Zealand, the availability of silicic acid limited diatom growth and thus any resultant increase in carbon export during the LGM. Therefore, silicic acid concentrations have remained low since the LGM. This result suggests that both silicic acid and iron co-limit EP in the SAZ around New Zealand, consistent with modern process studies.
Measuring of the maximum measurable velocity for dual-frequency laser interferometer
Zhiping Zhang; Zhaogu Cheng; Zhaoyu Qin; Jianqiang Zhu
2007-01-01
There is an increasing demand on the measurable velocity of laser interferometer in manufacturing technologies. The maximum measurable velocity is limited by frequency difference of laser source, optical configuration, and electronics bandwidth. An experimental setup based on free falling movement has been demonstrated to measure the maximum easurable velocity for interferometers. Measurement results show that the maximum measurable velocity is less than its theoretical value. Moreover, the effect of kinds of factors upon the measurement results is analyzed, and the results can offer a reference for industrial applications.
Hardware Implementation of Maximum Power Point Tracking for Thermoelectric Generators
Maganga, Othman; Phillip, Navneesh; Burnham, Keith J.; Montecucco, Andrea; Siviter, Jonathan; Knox, Andrew; Simpson, Kevin
2014-06-01
This work describes the practical implementation of two maximum power point tracking (MPPT) algorithms, namely those of perturb and observe, and extremum seeking control. The proprietary dSPACE system is used to perform hardware in the loop (HIL) simulation whereby the two control algorithms are implemented using the MATLAB/Simulink (Mathworks, Natick, MA) software environment in order to control a synchronous buck-boost converter connected to two commercial thermoelectric modules. The process of performing HIL simulation using dSPACE is discussed, and a comparison between experimental and simulated results is highlighted. The experimental results demonstrate the validity of the two MPPT algorithms, and in conclusion the benefits and limitations of real-time implementation of MPPT controllers using dSPACE are discussed.
Vector control structure of an asynchronous motor at maximum torque
Chioncel, C. P.; Tirian, G. O.; Gillich, N.; Raduca, E.
2016-02-01
Vector control methods offer the possibility to gain high performance, being widely used. Certain applications require an optimum control in limit operating conditions, as, at maximum torque, that is not always satisfied. The paper presents how the voltage and the frequency for an asynchronous machine (ASM) operating at variable speed are determinate, with an accent on the method that keeps the rotor flux constant. The simulation analyses consider three load types: variable torque and speed, variable torque and constant speed, constant torque and variable speed. The final values of frequency and voltage are obtained through the proposed control schemes with one controller using the simulation language based on the Maple module. The dynamic analysis of the system is done for the case with P and PI controller and allows conclusions on the proposed method, which can have different applications, as the ASM in wind turbines.
Maximum, minimum, and optimal mutation rates in dynamic environments
Ancliff, Mark; Park, Jeong-Man
2009-12-01
We analyze the dynamics of the parallel mutation-selection quasispecies model with a changing environment. For an environment with the sharp-peak fitness function in which the most fit sequence changes by k spin flips every period T , we find analytical expressions for the minimum and maximum mutation rates for which a quasispecies can survive, valid in the limit of large sequence size. We find an asymptotic solution in which the quasispecies population changes periodically according to the periodic environmental change. In this state we compute the mutation rate that gives the optimal mean fitness over a period. We find that the optimal mutation rate per genome, k/T , is independent of genome size, a relationship which is observed across broad groups of real organisms.
On the maximum mass of magnetised white dwarfs
Chatterjee, D; Chamel, N; Novak, J; Oertel, M
2016-01-01
We develop a detailed and self-consistent numerical model for extremely-magnetised white dwarfs, which have been proposed as progenitors of overluminous Type Ia supernovae. This model can describe fully-consistent equilibria of magnetic stars in axial symmetry, with rotation, general-relativistic effects and realistic equations of state (including electron-ion interactions and taking into account Landau quantisation of electrons due to the magnetic field). We study the influence of each of these ingredients onto the white dwarf structure and, in particular, on their maximum mass. We perform an extensive stability analysis of such objects, with their highest surface magnetic fields reaching $\\sim 10^{13}~G$ (at which point the star adopts a torus-like shape). We confirm previous speculations that although very massive strongly magnetised white dwarfs could potentially exist, the onset of electron captures and pycnonuclear reactions may severely limit their stability. Finally, the emission of gravitational wave...
Maximum caliber inference and the stochastic Ising model
Cafaro, Carlo; Ali, Sean Alan
2016-11-01
We investigate the maximum caliber variational principle as an inference algorithm used to predict dynamical properties of complex nonequilibrium, stationary, statistical systems in the presence of incomplete information. Specifically, we maximize the path entropy over discrete time step trajectories subject to normalization, stationarity, and detailed balance constraints together with a path-dependent dynamical information constraint reflecting a given average global behavior of the complex system. A general expression for the transition probability values associated with the stationary random Markov processes describing the nonequilibrium stationary system is computed. By virtue of our analysis, we uncover that a convenient choice of the dynamical information constraint together with a perturbative asymptotic expansion with respect to its corresponding Lagrange multiplier of the general expression for the transition probability leads to a formal overlap with the well-known Glauber hyperbolic tangent rule for the transition probability for the stochastic Ising model in the limit of very high temperatures of the heat reservoir.
Semiclassical decay of strings with maximum angular momentum
Iengo, R; Iengo, Roberto; Russo, Jorge G.
2003-01-01
A highly excited (closed or open) string state on the leading Regge trajectory can be represented by a rotating soliton solution. There is a semiclassical probability per unit cycle that this string can spontaneously break into two pieces. Here we find the resulting solutions for the outgoing two pieces, which describe two specific excited string states, and show that this semiclassical picture reproduces very accurately the features of the quantum calculation of decay in the large mass M limit. In particular, this picture prescribes the precise analytical relation of the masses M_1 and M_2 of the decay products, and indicates that the lifetime of these string states grows with the mass as T= const. a' M, in agreement with the quantum calculation. Thus, surprisingly, a string with maximum angular momentum becomes more stable for larger masses. We also point out some interesting features of the evolution after the splitting process.
20 CFR 211.14 - Maximum creditable compensation.
2010-04-01
... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Maximum creditable compensation. 211.14... CREDITABLE RAILROAD COMPENSATION § 211.14 Maximum creditable compensation. Maximum creditable compensation... Employment Accounts shall notify each employer of the amount of maximum creditable compensation applicable...
49 CFR 230.24 - Maximum allowable stress.
2010-10-01
... 49 Transportation 4 2010-10-01 2010-10-01 false Maximum allowable stress. 230.24 Section 230.24... Allowable Stress § 230.24 Maximum allowable stress. (a) Maximum allowable stress value. The maximum allowable stress value on any component of a steam locomotive boiler shall not exceed 1/4 of the ultimate...
Theoretical Estimate of Maximum Possible Nuclear Explosion
Bethe, H. A.
1950-01-31
The maximum nuclear accident which could occur in a Na-cooled, Be moderated, Pu and power producing reactor is estimated theoretically. (T.R.H.) 2O82 Results of nuclear calculations for a variety of compositions of fast, heterogeneous, sodium-cooled, U-235-fueled, plutonium- and power-producing reactors are reported. Core compositions typical of plate-, pin-, or wire-type fuel elements and with uranium as metal, alloy, and oxide were considered. These compositions included atom ratios in the following range: U-23B to U-235 from 2 to 8; sodium to U-235 from 1.5 to 12; iron to U-235 from 5 to 18; and vanadium to U-235 from 11 to 33. Calculations were performed to determine the effect of lead and iron reflectors between the core and blanket. Both natural and depleted uranium were evaluated as the blanket fertile material. Reactors were compared on a basis of conversion ratio, specific power, and the product of both. The calculated results are in general agreement with the experimental results from fast reactor assemblies. An analysis of the effect of new cross-section values as they became available is included. (auth)
Proposed principles of maximum local entropy production.
Ross, John; Corlan, Alexandru D; Müller, Stefan C
2012-07-12
Articles have appeared that rely on the application of some form of "maximum local entropy production principle" (MEPP). This is usually an optimization principle that is supposed to compensate for the lack of structural information and measurements about complex systems, even systems as complex and as little characterized as the whole biosphere or the atmosphere of the Earth or even of less known bodies in the solar system. We select a number of claims from a few well-known papers that advocate this principle and we show that they are in error with the help of simple examples of well-known chemical and physical systems. These erroneous interpretations can be attributed to ignoring well-established and verified theoretical results such as (1) entropy does not necessarily increase in nonisolated systems, such as "local" subsystems; (2) macroscopic systems, as described by classical physics, are in general intrinsically deterministic-there are no "choices" in their evolution to be selected by using supplementary principles; (3) macroscopic deterministic systems are predictable to the extent to which their state and structure is sufficiently well-known; usually they are not sufficiently known, and probabilistic methods need to be employed for their prediction; and (4) there is no causal relationship between the thermodynamic constraints and the kinetics of reaction systems. In conclusion, any predictions based on MEPP-like principles should not be considered scientifically founded.
Maximum entropy production and plant optimization theories.
Dewar, Roderick C
2010-05-12
Plant ecologists have proposed a variety of optimization theories to explain the adaptive behaviour and evolution of plants from the perspective of natural selection ('survival of the fittest'). Optimization theories identify some objective function--such as shoot or canopy photosynthesis, or growth rate--which is maximized with respect to one or more plant functional traits. However, the link between these objective functions and individual plant fitness is seldom quantified and there remains some uncertainty about the most appropriate choice of objective function to use. Here, plants are viewed from an alternative thermodynamic perspective, as members of a wider class of non-equilibrium systems for which maximum entropy production (MEP) has been proposed as a common theoretical principle. I show how MEP unifies different plant optimization theories that have been proposed previously on the basis of ad hoc measures of individual fitness--the different objective functions of these theories emerge as examples of entropy production on different spatio-temporal scales. The proposed statistical explanation of MEP, that states of MEP are by far the most probable ones, suggests a new and extended paradigm for biological evolution--'survival of the likeliest'--which applies from biomacromolecules to ecosystems, not just to individuals.
Maximum likelihood continuity mapping for fraud detection
Hogden, J.
1997-05-01
The author describes a novel time-series analysis technique called maximum likelihood continuity mapping (MALCOM), and focuses on one application of MALCOM: detecting fraud in medical insurance claims. Given a training data set composed of typical sequences, MALCOM creates a stochastic model of sequence generation, called a continuity map (CM). A CM maximizes the probability of sequences in the training set given the model constraints, CMs can be used to estimate the likelihood of sequences not found in the training set, enabling anomaly detection and sequence prediction--important aspects of data mining. Since MALCOM can be used on sequences of categorical data (e.g., sequences of words) as well as real valued data, MALCOM is also a potential replacement for database search tools such as N-gram analysis. In a recent experiment, MALCOM was used to evaluate the likelihood of patient medical histories, where ``medical history`` is used to mean the sequence of medical procedures performed on a patient. Physicians whose patients had anomalous medical histories (according to MALCOM) were evaluated for fraud by an independent agency. Of the small sample (12 physicians) that has been evaluated, 92% have been determined fraudulent or abusive. Despite the small sample, these results are encouraging.
Maximum life spiral bevel reduction design
Savage, M.; Prasanna, M. G.; Coe, H. H.
1992-07-01
Optimization is applied to the design of a spiral bevel gear reduction for maximum life at a given size. A modified feasible directions search algorithm permits a wide variety of inequality constraints and exact design requirements to be met with low sensitivity to initial values. Gear tooth bending strength and minimum contact ratio under load are included in the active constraints. The optimal design of the spiral bevel gear reduction includes the selection of bearing and shaft proportions in addition to gear mesh parameters. System life is maximized subject to a fixed back-cone distance of the spiral bevel gear set for a specified speed ratio, shaft angle, input torque, and power. Significant parameters in the design are: the spiral angle, the pressure angle, the numbers of teeth on the pinion and gear, and the location and size of the four support bearings. Interpolated polynomials expand the discrete bearing properties and proportions into continuous variables for gradient optimization. After finding the continuous optimum, a designer can analyze near optimal designs for comparison and selection. Design examples show the influence of the bearing lives on the gear parameters in the optimal configurations. For a fixed back-cone distance, optimal designs with larger shaft angles have larger service lives.
CORA - emission line fitting with Maximum Likelihood
Ness, J.-U.; Wichmann, R.
2002-07-01
The advent of pipeline-processed data both from space- and ground-based observatories often disposes of the need of full-fledged data reduction software with its associated steep learning curve. In many cases, a simple tool doing just one task, and doing it right, is all one wishes. In this spirit we introduce CORA, a line fitting tool based on the maximum likelihood technique, which has been developed for the analysis of emission line spectra with low count numbers and has successfully been used in several publications. CORA uses a rigorous application of Poisson statistics. From the assumption of Poissonian noise we derive the probability for a model of the emission line spectrum to represent the measured spectrum. The likelihood function is used as a criterion for optimizing the parameters of the theoretical spectrum and a fixed point equation is derived allowing an efficient way to obtain line fluxes. As an example we demonstrate the functionality of the program with an X-ray spectrum of Capella obtained with the Low Energy Transmission Grating Spectrometer (LETGS) on board the Chandra observatory and choose the analysis of the Ne IX triplet around 13.5 Å.
Finding maximum JPEG image block code size
Lakhani, Gopal
2012-07-01
We present a study of JPEG baseline coding. It aims to determine the minimum storage needed to buffer the JPEG Huffman code bits of 8-bit image blocks. Since DC is coded separately, and the encoder represents each AC coefficient by a pair of run-length/AC coefficient level, the net problem is to perform an efficient search for the optimal run-level pair sequence. We formulate it as a two-dimensional, nonlinear, integer programming problem and solve it using a branch-and-bound based search method. We derive two types of constraints to prune the search space. The first one is given as an upper-bound for the sum of squares of AC coefficients of a block, and it is used to discard sequences that cannot represent valid DCT blocks. The second type constraints are based on some interesting properties of the Huffman code table, and these are used to prune sequences that cannot be part of optimal solutions. Our main result is that if the default JPEG compression setting is used, space of minimum of 346 bits and maximum of 433 bits is sufficient to buffer the AC code bits of 8-bit image blocks. Our implementation also pruned the search space extremely well; the first constraint reduced the initial search space of 4 nodes down to less than 2 nodes, and the second set of constraints reduced it further by 97.8%.
Maximum likelihood estimates of pairwise rearrangement distances.
Serdoz, Stuart; Egri-Nagy, Attila; Sumner, Jeremy; Holland, Barbara R; Jarvis, Peter D; Tanaka, Mark M; Francis, Andrew R
2017-06-21
Accurate estimation of evolutionary distances between taxa is important for many phylogenetic reconstruction methods. Distances can be estimated using a range of different evolutionary models, from single nucleotide polymorphisms to large-scale genome rearrangements. Corresponding corrections for genome rearrangement distances fall into 3 categories: Empirical computational studies, Bayesian/MCMC approaches, and combinatorial approaches. Here, we introduce a maximum likelihood estimator for the inversion distance between a pair of genomes, using a group-theoretic approach to modelling inversions introduced recently. This MLE functions as a corrected distance: in particular, we show that because of the way sequences of inversions interact with each other, it is quite possible for minimal distance and MLE distance to differently order the distances of two genomes from a third. The second aspect tackles the problem of accounting for the symmetries of circular arrangements. While, generally, a frame of reference is locked, and all computation made accordingly, this work incorporates the action of the dihedral group so that distance estimates are free from any a priori frame of reference. The philosophy of accounting for symmetries can be applied to any existing correction method, for which examples are offered. Copyright © 2017 Elsevier Ltd. All rights reserved.
Boudechiche, S.; Hall, S. [University of Nottingham, Nottingham (United Kingdom)
1995-06-01
The desire for higher quality coal products in froth flotation has led to the introduction of a number of novel flotation techniques, including flotation columns, but the benefits of each in relation to the source of the slurry must be evaluated before plant is installed. It was to assess on a laboratory scale the quality of coal flotation concentrates from column flotation of fine coal (-500{mu}m) as an alternative to the traditional conventional agitated cell that this work was carried out. The column developed specifically for this purpose allowed the establishment of an approach to the examination of the flotation response of samples of UK coals (originating from Bolsover, Derbyshies; Rawdon, Leicestershire; and Bilsthorpe, Nottinghamshire). The work indicates the importance of the origin of the feed slurry, since each type of coal exhibits a different flotation response. The observations from the results described in this paper enable an assessment to be made of the merits of column flotation in fine coal treatment. 11 refs., 4 figs., 5 tabs.
Maximum work configurations of finite potential capacity reservoir chemical engines
无
2010-01-01
An isothermal endoreversible chemical engine operating between the finite potential capacity high-chemical-potential reservoir and the infinite potential capacity low-chemical-potential reservoir has been studied in this work.Optimal control theory was applied to determine the optimal cycle configurations corresponding to the maximum work output per cycle for the fixed total cycle time and a universal mass transfer law.Analyses of special examples showed that the optimal cycle configuration with the mass transfer law g∝△μ,where△μis the chemical potential difference,is an isothermal endoreversible chemical engine cycle,in which the chemical potential(or the concentration) of the key component in the working substance of low-chemical-potential side is a constant,while the chemical potentials(or the concentrations) of the key component in the finite potential capacity high-chemical-potential reservoir and the corresponding side working substance change nonlinearly with time,and the difference of the chemical potentials(or the ratio of the concentrations) of the key component between the high-chemical-potential reservoir and the working substance is a constant.While the optimal cycle configuration with the mass transfer law g∝△μc,where △μc is the concentration difference,is different from that with the mass transfer law g∝△μ significantly.When the high-chemical-potential reservoir is also an infinite potential capacity chemical potential reservoir,the optimal cycle configuration of the isothermal endoreversible chemical engine consists of two constant chemical potential branches and two instantaneous constant mass-flux branches,which is independent of the mass transfer law.The object studied in this paper is general,and the results can provide some guidelines for optimal design and operation of real chemical engines.
Boedeker, Peter
2017-01-01
Hierarchical linear modeling (HLM) is a useful tool when analyzing data collected from groups. There are many decisions to be made when constructing and estimating a model in HLM including which estimation technique to use. Three of the estimation techniques available when analyzing data with HLM are maximum likelihood, restricted maximum…
Wood, Nathan J.; Wilson, Rick I.; Ratliff, Jamie L.; Peters, Jeff; MacMullan, Ed; Krebs, Tessa; Shoaf, Kimberley; Miller, Kevin
2017-01-01
Well-executed evacuations are key to minimizing loss of life from tsunamis, yet they also disrupt communities and business productivity in the process. Most coastal communities implement evacuations based on a previously delineated maximum-inundation zone that integrates zones from multiple tsunami sources. To support consistent evacuation planning that protects lives but attempts to minimize community disruptions, we explore the implications of scenario-based evacuation procedures and use the California (USA) coastline as our case study. We focus on the land in coastal communities that is in maximum-evacuation zones, but is not expected to be flooded by a tsunami generated by a Chilean earthquake scenario. Results suggest that a scenario-based evacuation could greatly reduce the number of residents and employees that would be advised to evacuate for 24–36 h (178,646 and 159,271 fewer individuals, respectively) and these reductions are concentrated primarily in three counties for this scenario. Private evacuation spending is estimated to be greater than public expenditures for operating shelters in the area of potential over-evacuations ($13 million compared to $1 million for a 1.5-day evacuation). Short-term disruption costs for businesses in the area of potential over-evacuation are approximately $122 million for a 1.5-day evacuation, with one-third of this cost associated with manufacturing, suggesting that some disruption costs may be recouped over time with increased short-term production. There are many businesses and organizations in this area that contain individuals with limited mobility or access and functional needs that may have substantial evacuation challenges. This study demonstrates and discusses the difficulties of tsunami-evacuation decision-making for relatively small to moderate events faced by emergency managers, not only in California but in coastal communities throughout the world.
The Maximum Free Magnetic Energy Allowed in a Solar Active Region
Moore, Ronald L.; Falconer, David A.
2009-01-01
Two whole-active-region magnetic quantities that can be measured from a line-of-sight magnetogram are (sup L) WL(sub SG), a gauge of the total free energy in an active region's magnetic field, and sup L(sub theta), a measure of the active region's total magnetic flux. From these two quantities measured from 1865 SOHO/MDI magnetograms that tracked 44 sunspot active regions across the 0.5 R(sub Sun) central disk, together with each active region's observed production of CMEs, X flares, and M flares, Falconer et al (2009, ApJ, submitted) found that (1) active regions have a maximum attainable free magnetic energy that increases with the magnetic size (sup L) (sub theta) of the active region, (2) in (Log (sup L)WL(sub SG), Log(sup L) theta) space, CME/flare-productive active regions are concentrated in a straight-line main sequence along which the free magnetic energy is near its upper limit, and (3) X and M flares are restricted to large active regions. Here, from (a) these results, (b) the observation that even the greatest X flares produce at most only subtle changes in active region magnetograms, and (c) measurements from MSFC vector magnetograms and from MDI line-of-sight magnetograms showing that practically all sunspot active regions have nearly the same area-averaged magnetic field strength: =- theta/A approximately equal to 300 G, where theta is the active region's total photospheric flux of field stronger than 100 G and A is the area of that flux, we infer that (1) the maximum allowed ratio of an active region's free magnetic energy to its potential-field energy is 1, and (2) any one CME/flare eruption releases no more than a small fraction (less than 10%) of the active region's free magnetic energy. This work was funded by NASA's Heliophysics Division and NSF's Division of Atmospheric Sciences.
Baks, T.; Janssen, A.E.M.; Boom, R.M.
2006-01-01
The effect of the presence of several small carbohydrates on the measurement of the -amylase activity was determined over a broad concentration range. At low carbohydrate concentrations, a distinct maximum in the -amylase activity versus concentration curves was observed in several cases. At higher
Li Ping Wu
2012-01-01
Full Text Available A new method of detecting Hg (II ion with silver nanoparticles (AgNPs is developed in this contribution. When Hg (II ions were added into AgNPs solution, the solution displayed rapid color change and blue shift of the maximum absorption wavelength (Δλ, which was in proportion to the Hg (II ion concentration over the range of 2.0 × 10−7–6.0 × 10−6 mol/L, with detection limit (3σ of 6.6 × 10−9 mol/L. Under the same experimental conditions, other metal ions did not interfere. Thus, we propose a rapid, simple and highly selective method for detecting Hg (II ion.
Carbon Concentration of Austenite
Z. Ławrynowicz
2007-07-01
Full Text Available The investigation was carried out to examine the influence of temperature and times of austempering process on the maximum extend towhich the bainite reaction can proceed and the carbon content in retained austenite. It should be noted that a small percentage change in theaustenite carbon content can have a significant effect on the subsequent austempering reaction changing the volume fraction of the phasespresent and hence, the resulting mechanical properties. Specimens were prepared from an unalloyed ductile cast iron, austenitised at 950oCfor 60 minutes and austempered by the conventional single-step austempering process at four temperatures between BS and MS, eg., 250,300, 350 and 400oC. The samples were austempered at these temperatures for 15, 30, 60, 120 and 240 minutes and finally quenched toambient temperature. Volume fractions of retained austenite and carbon concentration in the residual austenite have been observed byusing X-ray diffraction. Additionally, carbon concentration in the residual austenite was calculated using volume fraction data of austeniteand a model developed by Bhadeshia based on the McLellan and Dunn quasi-chemical thermodynamic model. The comparison ofexperimental data with the T0, T0' and Ae3' phase boundaries suggests the likely mechanism of bainite reaction in cast iron is displacive rather than diffusional. The carbon concentration in retained austenite demonstrates that at the end of bainite reaction the microstructure must consist of not only ausferrite but additionally precipitated carbides.
Suarez-Kurtz, G; Ribeiro, F M; Vicente, F L; Struchiner, C J
2001-11-01
Amoxicillin plasma concentrations (n = 1,152) obtained from 48 healthy subjects in two bioequivalence studies were used to develop limited-sampling strategy (LSS) models for estimating the area under the concentration-time curve (AUC), the maximum concentration of drug in plasma (C(max)), and the time interval of concentration above MIC susceptibility breakpoints in plasma (T>MIC). Each subject received 500-mg amoxicillin, as reference and test capsules or suspensions, and plasma concentrations were measured by a validated microbiological assay. Linear regression analysis and a "jack-knife" procedure revealed that three-point LSS models accurately estimated (R(2), 0.92; precision, MICs of 0.25 or 2.0 microg/ml, which are representative of microorganisms susceptible and resistant to amoxicillin.
Maximum likelihood molecular clock comb: analytic solutions.
Chor, Benny; Khetan, Amit; Snir, Sagi
2006-04-01
Maximum likelihood (ML) is increasingly used as an optimality criterion for selecting evolutionary trees, but finding the global optimum is a hard computational task. Because no general analytic solution is known, numeric techniques such as hill climbing or expectation maximization (EM), are used in order to find optimal parameters for a given tree. So far, analytic solutions were derived only for the simplest model--three taxa, two state characters, under a molecular clock. Four taxa rooted trees have two topologies--the fork (two subtrees with two leaves each) and the comb (one subtree with three leaves, the other with a single leaf). In a previous work, we devised a closed form analytic solution for the ML molecular clock fork. In this work, we extend the state of the art in the area of analytic solutions ML trees to the family of all four taxa trees under the molecular clock assumption. The change from the fork topology to the comb incurs a major increase in the complexity of the underlying algebraic system and requires novel techniques and approaches. We combine the ultrametric properties of molecular clock trees with the Hadamard conjugation to derive a number of topology dependent identities. Employing these identities, we substantially simplify the system of polynomial equations. We finally use tools from algebraic geometry (e.g., Gröbner bases, ideal saturation, resultants) and employ symbolic algebra software to obtain analytic solutions for the comb. We show that in contrast to the fork, the comb has no closed form solutions (expressed by radicals in the input data). In general, four taxa trees can have multiple ML points. In contrast, we can now prove that under the molecular clock assumption, the comb has a unique (local and global) ML point. (Such uniqueness was previously shown for the fork.).
Metamaterial anisotropic flux concentrators and magnetic arrays
Bjørk, R; Bahl, C R H
2014-01-01
A metamaterial magnetic flux concentrator is investigated in detail in combination with a Halbach cylinder of infinite length. A general analytical solution to the field is determined and the magnetic figure of merit is determined for a Halbach cylinder with a flux concentrator. It is shown that an ideal flux concentrator will not change the figure of merit of a given magnet design, while the non-ideal will always lower it. The geometric parameters producing maximum figure of merit, i.e. the most efficient devices, are determined. The force and torque between two concentric Halbach cylinders with flux concentrators is determined and the maximum torque is found. Finally, the effect of non-ideal flux concentrators and the practical use of flux concentrators, as well as demagnetization issues, is discussed.
The Prediction of Maximum Amplitudes of Solar Cycles and the Maximum Amplitude of Solar Cycle 24
无
2002-01-01
We present a brief review of predictions of solar cycle maximum ampli-tude with a lead time of 2 years or more. It is pointed out that a precise predictionof the maximum amplitude with such a lead-time is still an open question despiteprogress made since the 1960s. A method of prediction using statistical character-istics of solar cycles is developed: the solar cycles are divided into two groups, ahigh rising velocity (HRV) group and a low rising velocity (LRV) group, dependingon the rising velocity in the ascending phase for a given duration of the ascendingphase. The amplitude of Solar Cycle 24 can be predicted after the start of thecycle using the formula derived in this paper. Now, about 5 years before the startof the cycle, we can make a preliminary prediction of 83.2-119.4 for its maximumamplitude.
Serfontein, Dawid E., E-mail: Dawid.Serfontein@nwu.ac.za
2014-05-01
In a preceding study, coupled neutronics and thermo-hydraulic simulations were performed with the VSOP-A diffusion code for the standard 9.6 wt% enriched 9 g uranium fuel spheres in the 400 MWth Pebble Bed Modular Reactor Demonstration Power Plant. The axial power profile peaked at about a third from the top of the fuel core and the radial profile peaked directly adjacent to the central graphite reflector. The maximum temperature during a Depressurised Loss of Coolant (DLOFC) incident was 1581.0 °C, which is close to the limit of 1600 °C above which the leakage of radioactive fission products through the TRISO coatings around the fuel kernels may become unacceptable. This may present licensing challenges and also limits the total power output of the reactor. In this article the results of an optimisation study of the axial and radial power profiles for this reactor are reported. The main aim was to minimise the maximum DLOFC temperature. Reducing the maximum equilibrium temperature during normal operation was a lesser aim. Minimising the maximum DLOFC temperature was achieved by placing an optimised distribution of {sup 10}B neutron poison in the central reflector. The standard power profiles are sub-optimal with respect to the passive leakage of decay heat during a DLOFC. Since the radial power profile peaks directly adjacent to the central reflector, the distance that the decay heat needs to be conducted toward the outside of the reactor and the ultimate heat sink is at a maximum. The sharp axial power profile peak means that most of the decay power is concentrated in a small part of the core volume, thereby sharply increasing the required outward heat flux in this hotspot region. Both these features sharply increase the maximum DLOFC temperatures in this hotspot. Therefore the axial distribution of the neutron poisons in the central reflector was optimised so as to push the equilibrium power density profile radially outward and to suppress the axial power peak
2010-07-01
... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Speed limits. 401.28 Section 401... TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Seaway Navigation § 401.28 Speed limits. (a) The maximum speed over the bottom for a vessel of more than 12 m in overall length shall be regulated so as not...
2010-01-01
... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Weight limits. 25.25 Section 25.25 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Flight General § 25.25 Weight limits. (a) Maximum weights....