Molecular clock fork phylogenies: closed form analytic maximum likelihood solutions.
Chor, Benny; Snir, Sagi
2004-12-01
Maximum likelihood (ML) is increasingly used as an optimality criterion for selecting evolutionary trees, but finding the global optimum is a hard computational task. Because no general analytic solution is known, numeric techniques such as hill climbing or expectation maximization (EM) are used in order to find optimal parameters for a given tree. So far, analytic solutions were derived only for the simplest model-three-taxa, two-state characters, under a molecular clock. Quoting Ziheng Yang, who initiated the analytic approach,"this seems to be the simplest case, but has many of the conceptual and statistical complexities involved in phylogenetic estimation."In this work, we give general analytic solutions for a family of trees with four-taxa, two-state characters, under a molecular clock. The change from three to four taxa incurs a major increase in the complexity of the underlying algebraic system, and requires novel techniques and approaches. We start by presenting the general maximum likelihood problem on phylogenetic trees as a constrained optimization problem, and the resulting system of polynomial equations. In full generality, it is infeasible to solve this system, therefore specialized tools for the molecular clock case are developed. Four-taxa rooted trees have two topologies-the fork (two subtrees with two leaves each) and the comb (one subtree with three leaves, the other with a single leaf). We combine the ultrametric properties of molecular clock fork trees with the Hadamard conjugation to derive a number of topology dependent identities. Employing these identities, we substantially simplify the system of polynomial equations for the fork. We finally employ symbolic algebra software to obtain closed formanalytic solutions (expressed parametrically in the input data). In general, four-taxa trees can have multiple ML points. In contrast, we can now prove that each fork topology has a unique(local and global) ML point.
Closed form maximum likelihood estimator of conditional random fields
Zhu, Zhemin; Hiemstra, Djoerd; Apers, Peter M.G.; Wombacher, Andreas
2013-01-01
Training Conditional Random Fields (CRFs) can be very slow for big data. In this paper, we present a new training method for CRFs called {\\em Empirical Training} which is motivated by the concept of co-occurrence rate. We show that the standard training (unregularized) can have many maximum likeliho
Maximum Likelihood Position Location with a Limited Number of References
D. Munoz-Rodriguez
2011-04-01
Full Text Available A Position Location (PL scheme for mobile users on the outskirts of coverage areas is presented. The proposedmethodology makes it possible to obtain location information with only two land-fixed references. We introduce ageneral formulation and show that maximum-likelihood estimation can provide adequate PL information in thisscenario. The Root Mean Square (RMS error and error-distribution characterization are obtained for differentpropagation scenarios. In addition, simulation results and comparisons to another method are provided showing theaccuracy and the robustness of the method proposed. We study accuracy limits of the proposed methodology fordifferent propagation environments and show that even in the case of mismatch in the error variances, good PLestimation is feasible.
Closed-type wing for drones: positive and negative characteristics
Leonid I. Gretchihin
2014-02-01
Full Text Available The paper presents the aerodynamics of a wing of a closed oval ellipsoidal shape, designed with the use of the molecular-kinetic theory. The positive and negative characteristics of aircraft - drones with an oval wing are described. The theoretical calculations have been experimentally checked.
Maximum precision closed-form solution for localizing diffraction-limited spots in noisy images.
Larkin, Joshua D; Cook, Peter R
2012-07-30
Super-resolution techniques like PALM and STORM require accurate localization of single fluorophores detected using a CCD. Popular localization algorithms inefficiently assume each photon registered by a pixel can only come from an area in the specimen corresponding to that pixel (not from neighboring areas), before iteratively (slowly) fitting a Gaussian to pixel intensity; they fail with noisy images. We present an alternative; a probability distribution extending over many pixels is assigned to each photon, and independent distributions are joined to describe emitter location. We compare algorithms, and recommend which serves best under different conditions. At low signal-to-noise ratios, ours is 2-fold more precise than others, and 2 orders of magnitude faster; at high ratios, it closely approximates the maximum likelihood estimate.
POSITION DETERMINATION OF CLOSELY SPACED BUNCHES USING CAVITY BPMs
Joshi, N; Cullinan, F; Lyapin, A
2011-01-01
Radio Frequency (RF) Cavity Beam Position Monitor (BPM) systems form a major part of precision position measurement diagnostics for linear accelerators with low emittance beams. Using cavity BPMs, a position resolution of less than 100 nm has been demonstrated in single bunch mode operation. In the case of closely spaced bunches, where the decay time of the cavity is comparable to the time separation between bunches, the BPM signal from a bunch is polluted by the signal induced by the previous bunches in the same bunch-train. This paper discusses our ongoing work to develop the methods to extract the position of closely spaced bunches using cavity BPMs. A signal subtraction code is being developed to remove the signal pollution from previous bunches and to determine the individual bunch position. Another code has been developed to simulate the BPM data for the cross check. Performance of the code is studied on the experimental and simulated data. Application of the analysis techniques to the linear colliders,...
Fujiwara, K; Miyaguchi, A; Toyama, H; Kunita, K; Asai, H
1999-08-01
The present study attempted to investigate the effect of position on the perception of angle of trunk flexion while standing. For this purpose, the range effect was factored out by setting the constant target angle at 10 degrees, with varied starting positions of trunk flexion. We found that subjects underestimated angle of trunk flexion when the starting position was close to a quiet standing posture, overestimated when close to maximum trunk flexion, and correctly perceived it when at the middle position. Less perceptual distortion was observed at the positions close to maximum trunk flexion in the present study than in our previous one, in which various target angles of trunk flexion were reproduced from a quiet standing posture. The reduced distortion in the present study was believed to have resulted from factoring out the range effect. The flexion angle of the hip joint changed in tandem with that of the trunk, while very little movement was observed in the ankle, knee, and neck joints. Judging from the changing pattern of hip-joint angle, the muscle activity of the erector spinae and biceps femoris increased gradually to 90 degrees trunk flexion. In contrast, the actual increment of muscle activity reached zero or a minimum value at the middle angles as the angle of trunk flexion increased. It was assumed that the abrupt change in kinesthetic information associated with muscle activity exerted a great influence on the perception of trunk flexion.
Maximum likelihood positioning for gamma-ray imaging detectors with depth of interaction measurement
Lerche, Ch.W. [Grupo de Sistemas Digitales, ITACA, Universidad Politecnica de Valencia, 46022 Valencia (Spain)], E-mail: lerche@ific.uv.es; Ros, A. [Grupo de Fisica Medica Nuclear, IFIC, Universidad de Valencia-Consejo Superior de Investigaciones Cientificas, 46980 Paterna (Spain); Monzo, J.M.; Aliaga, R.J.; Ferrando, N.; Martinez, J.D.; Herrero, V.; Esteve, R.; Gadea, R.; Colom, R.J.; Toledo, J.; Mateo, F.; Sebastia, A. [Grupo de Sistemas Digitales, ITACA, Universidad Politecnica de Valencia, 46022 Valencia (Spain); Sanchez, F.; Benlloch, J.M. [Grupo de Fisica Medica Nuclear, IFIC, Universidad de Valencia-Consejo Superior de Investigaciones Cientificas, 46980 Paterna (Spain)
2009-06-01
The center of gravity algorithm leads to strong artifacts for gamma-ray imaging detectors that are based on monolithic scintillation crystals and position sensitive photo-detectors. This is a consequence of using the centroids as position estimates. The fact that charge division circuits can also be used to compute the standard deviation of the scintillation light distribution opens a way out of this drawback. We studied the feasibility of maximum likelihood estimation for computing the true gamma-ray photo-conversion position from the centroids and the standard deviation of the light distribution. The method was evaluated on a test detector that consists of the position sensitive photomultiplier tube H8500 and a monolithic LSO crystal (42mmx42mmx10mm). Spatial resolution was measured for the centroids and the maximum likelihood estimates. The results suggest that the maximum likelihood positioning is feasible and partially removes the strong artifacts of the center of gravity algorithm.
Two-Agent Scheduling to Minimize the Maximum Cost with Position-Dependent Jobs
Long Wan
2015-01-01
Full Text Available This paper investigates a single-machine two-agent scheduling problem to minimize the maximum costs with position-dependent jobs. There are two agents, each with a set of independent jobs, competing to perform their jobs on a common machine. In our scheduling setting, the actual position-dependent processing time of one job is characterized by variable function dependent on the position of the job in the sequence. Each agent wants to fulfil the objective of minimizing the maximum cost of its own jobs. We develop a feasible method to achieve all the Pareto optimal points in polynomial time.
CHARACTERISTICS OF MAXIMUM PERFORMANCE OF PEDALING EXERCISE IN RECUMBENT AND SUPINE POSITIONS
Morimasa Kato
2011-09-01
Full Text Available To determine the characteristics of maximum pedaling performance in the recumbent and supine positions, maximum isokinetic leg muscle strength was measured in eight healthy male subjects during pedaling at three velocities (300°/s, 480°/s, and 660°/s, and maximum incremental tests were performed for each position. The maximum isokinetic muscle strength in the recumbent position was 210.0 ± 29.2 Nm at 300°/s, 158.4 ± 19.8 Nm at 480°/s, and 110.6 ± 13.2 at 660°/s. In contrast, the muscle strength in the supine position was 229.3 ± 36.7 Nm at 300°/s, 180. 7 ± 20.3 Nm at 480°/s, and 129.6 ± 14.0 Nm at 660°/s. Thus, the maximum isokinetic muscle strength showed significantly higher values in the supine position than in the recumbent position at all angular velocities. The knee and hip joint angles were measured at peak torque using a goniometer; the knee joint angle was not significantly different between both positions, whereas the hip joint angle was greater in the supine position than in the recumbent position (Supine position: 137.3 ± 9. 33 degree at 300°/s, 140.0 ± 11.13 degrees at 480°/s, and 141.0 ± 9.61 degrees at 660°/s. Recumbent position: 99.5 ± 12.21 degrees at 300°/s, 101.6 ± 12.29 degrees at 480°/s, and 105.8 ± 14.28 degrees at 660°/s. Peak oxygen uptake was higher in the recumbent position (50.3 ± 4.43 ml·kg-1·min-1 than in the supine position (48.7 ± 5.10 ml·kg-1·min-1. At maximum exertion, the heart rate and whole-body rate of perceived exertion (RPE were unaffected by position, but leg muscle RPE was higher in the supine position (19.5 ± 0.53 than in the recumbent position (18.8 ± 0.71. These results suggest that the supine position is more suitable for muscle strength exertion than the recumbent position, and this may be due to different hip joint angles between the positions. On the contrary, the endurance capacity was higher in the recumbent position than in the supine position. Since leg muscle
Matsumoto, Atsushi; Hasegawa, Masaru; Matsui, Keiju
In this paper, a novel position sensorless control method for interior permanent magnet synchronous motors (IPMSMs) that is based on a novel flux model suitable for maximum torque control has been proposed. Maximum torque per ampere (MTPA) control is often utilized for driving IPMSMs with the maximum efficiency. In order to implement this control, generally, the parameters are required to be accurate. However, the inductance varies dramatically because of magnetic saturation, which has been one of the most important problems in recent years. Therefore, the conventional MTPA control method fails to achieve maximum efficiency for IPMSMs because of parameter mismatches. In this paper, first, a novel flux model has been proposed for realizing the position sensorless control of IPMSMs, which is insensitive to Lq. In addition, in this paper, it has been shown that the proposed flux model can approximately estimate the maximum torque control (MTC) frame, which as a new coordinate aligned with the current vector for MTPA control. Next, in this paper, a precise estimation method for the MTC frame has been proposed. By this method, highly accurate maximum torque control can be achieved. A decoupling control algorithm based on the proposed model has also been addressed in this paper. Finally, some experimental results demonstrate the feasibility and effectiveness of the proposed method.
Jang, Yun Hee; Cho, Bum Sang; Kang, Min Ho; Kang, Woo Young; Lee, Jisun; Kim, Yook; Lee, Soo Hyun; Lee, Soo Jung [Dept. of Radiology, Chungbuk National University Hospital, Cheongju (Korea, Republic of); Lee, Jin Yong [Public Health Medical Service, Seoul National University Boramae Medical Center, Seoul (Korea, Republic of)
2016-07-15
The purpose of this study was to determine a suitable position in which the measured length on ultrasound is close to the true renal length obtained through a multiplanar reconstructed MR image. A total of 33 individuals (males: 15, females: 18) without any underlying renal disease were included in the present study. Renal length was measured as the longest axis at the level of the renal hilum in three positions-supine, lateral decubitus, and prone, respectively. With a 3.0 T MR scanner, 3D eTHRIVE was acquired. Subsequently, the maximum longitudinal length of both the kidneys was measured through multiplanar reconstructed MR images. Paired t-test was used to compare the renal length obtained from ultrasonographic measurement with the length obtained through multiplanar reconstructed MR images. Our study demonstrated significant difference between sonographic renal length in three positions and renal length through MRI (p < 0.001). However, the longest longitudinal length of right kidney among the measured three values by ultrasound was statistically similar to the renal length measured by reconstructed MR image. Among them, the lateral decubitus position showed the strongest correlation with true renal length (right: 0.887; left: 0.849). We recommend measurement of the maximum renal longitudinal length in all possible positions on ultrasonography. If not allowed, the best measurement is on the lateral decubitus showing the strongest correlation coefficient with true renal length.
Evaluation of an optical beam-position-monitor system with closed-loop steering capabilities
Bissen, Mark; Rogers, Greg; Wood, William; Eisert, Dave; Kleman, K. J.; Winter, William; Höchst, Hartmut
1994-08-01
Imaging the synchrotron source profile onto the entrance slit of a monochromator provides a stable and reproducible energy calibration which is independent of the absolute position and drift of the electron beam. Potential electron-beam motions occurring during a fill result in a loss of flux through the beamline. We have implemented two independent beam position monitors which can be used as sensors to steer the vertical entrance mirror in order to maintain a maximum flux through a spherical grating varied line-spacing monochromator beamline. The system consists of a slotted plate photodiode which intercepts 2 mrad of synchrotron radiation next to the entrance mirror and a detector utilizing the photocurrents generated at the jaws of the entrance-slit assembly. Both monitors have a wide linear response range with a vertical position resolution of beam position monitors allows an easy check on the mechanical and thermal stability of the entrance optical system as well as on the reproducibility and long-term fluctuations of the electron-beam source during user shifts. We will discuss the performance of the optical beam-position-monitor system and its implementation as a sensor in a closed-loop feedback system to maintain maximum flux through the beamline.
A maximum likelihood approach to estimating articulator positions from speech acoustics
Hogden, J.
1996-09-23
This proposal presents an algorithm called maximum likelihood continuity mapping (MALCOM) which recovers the positions of the tongue, jaw, lips, and other speech articulators from measurements of the sound-pressure waveform of speech. MALCOM differs from other techniques for recovering articulator positions from speech in three critical respects: it does not require training on measured or modeled articulator positions, it does not rely on any particular model of sound propagation through the vocal tract, and it recovers a mapping from acoustics to articulator positions that is linearly, not topographically, related to the actual mapping from acoustics to articulation. The approach categorizes short-time windows of speech into a finite number of sound types, and assumes the probability of using any articulator position to produce a given sound type can be described by a parameterized probability density function. MALCOM then uses maximum likelihood estimation techniques to: (1) find the most likely smooth articulator path given a speech sample and a set of distribution functions (one distribution function for each sound type), and (2) change the parameters of the distribution functions to better account for the data. Using this technique improves the accuracy of articulator position estimates compared to continuity mapping -- the only other technique that learns the relationship between acoustics and articulation solely from acoustics. The technique has potential application to computer speech recognition, speech synthesis and coding, teaching the hearing impaired to speak, improving foreign language instruction, and teaching dyslexics to read. 34 refs., 7 figs.
Plotting positions via maximum-likelihood for a non-standard situation
D. A. Jones
1997-01-01
Full Text Available A new approach is developed for the specification of the plotting positions used in the frequency analysis of extreme flows, rainfalls or similar data. The approach is based on the concept of maximum likelihood estimation and it is applied here to provide plotting positions for a range of problems which concern non-standard versions of annual-maximum data. This range covers the inclusion of incomplete years of data and also the treatment of cases involving regional maxima, where the number of sites considered varies from year to year. These problems, together with a not-to-be-recommended approach to using historical information, can be treated as special cases of a non-standard situation in which observations arise from different statistical distributions which vary in a simple, known, way.
Moore, S K; Hunter, W C J; Furenlid, L.R.; Barrett, H. H.
2007-01-01
We present a simple 3D event position-estimation method using raw list-mode acquisition and maximum-likelihood estimation in a modular gamma camera with a thick (25mm) monolithic scintillation crystal. This method involves measuring 2D calibration scans with a well-collimated 511 keV source and fitting each point to a simple depth-dependent light distribution model. Preliminary results show that angled collimated beams appear properly reconstructed.
Maximum-likelihood approaches reveal signatures of positive selection in IL genes in mammals.
Neves, Fabiana; Abrantes, Joana; Steinke, John W; Esteves, Pedro J
2014-02-01
ILs are part of the immune system and are involved in multiple biological activities. ILs have been shown to evolve under positive selection; however, little information exists regarding which codons are specifically selected. By using different codon-based maximum-likelihood (ML) approaches, signatures of positive selection in mammalian ILs were searched for. Sequences of 46 ILs were retrieved from publicly available databases of mammalian genomes to detect signatures of positive selection in individual codons. Evolutionary analyses were conducted under two ML frameworks, the HyPhy package implemented in the Data Monkey Web Server and CODEML implemented in PAML. Signatures of positive selection were found in 28 ILs: IL-1A and B; IL-2, IL-4 to IL-10, IL-12A and B; IL-14 to IL-17A and C; IL-18, IL-20 to IL-22, IL-25, IL-26, IL-27B, IL-31, IL-34, IL-36A; and G. Codons under positive selection varied between 1 and 15. No evidence of positive selection was detected in IL-13; IL-17B and F; IL-19, IL-23, IL-24, IL-27A; or IL-29. Most mammalian ILs have sites evolving under positive selection, which may be explained by the multitude of biological processes in which ILs are enrolled. The results obtained raise hypotheses concerning the ILs functions, which should be pursued by using mutagenesis and crystallographic approaches.
A comparison of two gluteus maximus EMG maximum voluntary isometric contraction positions
Bret Contreras
2015-09-01
Full Text Available Background. The purpose of this study was to compare the peak electromyography (EMG of the most commonly-used position in the literature, the prone bent-leg (90° hip extension against manual resistance applied to the distal thigh (PRONE, to a novel position, the standing glute squeeze (SQUEEZE.Methods. Surface EMG electrodes were placed on the upper and lower gluteus maximus of thirteen recreationally active females (age = 28.9 years; height = 164 cm; body mass = 58.2 kg, before three maximum voluntary isometric contraction (MVIC trials for each position were obtained in a randomized, counterbalanced fashion.Results. No statistically significant (p < 0.05 differences were observed between PRONE (upper: 91.94%; lower: 94.52% and SQUEEZE (upper: 92.04%; lower: 85.12% for both the upper and lower gluteus maximus. Neither the PRONE nor SQUEEZE was more effective between all subjects.Conclusions. In agreement with other studies, no single testing position is ideal for every participant. Therefore, it is recommended that investigators employ multiple MVIC positions, when possible, to ensure accuracy. Future research should investigate a variety of gluteus maximus MVIC positions in heterogeneous samples.
A comparison of two gluteus maximus EMG maximum voluntary isometric contraction positions.
Contreras, Bret; Vigotsky, Andrew D; Schoenfeld, Brad J; Beardsley, Chris; Cronin, John
2015-01-01
Background. The purpose of this study was to compare the peak electromyography (EMG) of the most commonly-used position in the literature, the prone bent-leg (90°) hip extension against manual resistance applied to the distal thigh (PRONE), to a novel position, the standing glute squeeze (SQUEEZE). Methods. Surface EMG electrodes were placed on the upper and lower gluteus maximus of thirteen recreationally active females (age = 28.9 years; height = 164 cm; body mass = 58.2 kg), before three maximum voluntary isometric contraction (MVIC) trials for each position were obtained in a randomized, counterbalanced fashion. Results. No statistically significant (p < 0.05) differences were observed between PRONE (upper: 91.94%; lower: 94.52%) and SQUEEZE (upper: 92.04%; lower: 85.12%) for both the upper and lower gluteus maximus. Neither the PRONE nor SQUEEZE was more effective between all subjects. Conclusions. In agreement with other studies, no single testing position is ideal for every participant. Therefore, it is recommended that investigators employ multiple MVIC positions, when possible, to ensure accuracy. Future research should investigate a variety of gluteus maximus MVIC positions in heterogeneous samples.
Microprocessor Controller in Closed Loop Angular Position Servo System P.
P. B. Deshpande
1989-07-01
Full Text Available Integrated command, control and copmunication systems are based on the use of computers for digital data processing. The weapon system platforms like missile launchers are given input command for accurate and quick positioning in azimuth and elevation. The technologies of sensors, signal conditioning and associated solid state electronics have moved from analog to digital. Therefore, a position controller has to be designed around a microprocessor in embedded form for usage in such servo control systems. This paper highlights the basic approach for such design and problems which need to be tackled during actual implementation.
Kumashiro, Madoka; Sedikides, Constantine
2005-09-01
Do close positive relationships function as a self-bolstering resource, armoring the self against potentially threatening information? After taking a difficult and important intellectual ability test, participants visualized a relationship that was close positive, close negative, or neutral (Experiment 1) or a relationship that was close positive, close negative, distant positive, or distant negative (Experiment 2). All participants received bogus unfavorable feedback about their performance and subsequently indicated their interest in obtaining further liability-focused information about the performance domain and the underlying intellectual ability. Participants who visualized close positive relationships expressed the highest interest in receiving such information, despite rating it as unpleasant. State self-esteem and mood did not account for this effect, although warm affect for the relational partner did. Close positive relationships function as a psychological resource that bolsters the self against feedback about a newly discovered liability to the point where receptivity to additional liability-relevant information actually increases.
Hida, Hajime; Tomigashi, Yoshio; Kishimoto, Keiji
High efficiency drive can be achieved by the maximum torque-per-ampere (MTPA) control which used reluctance torque effectively. However, the calculations for estimating rotor position and for controlling the d-axis current are required. The motor parameters of inductance etc. that are easily affected by magnetic saturation are included in those calculations. This paper proposes a new MTPA control method, which is robust against changes of motor parameters caused by magnetic saturation. In addition, complex calculation for d-axis current or reference to the table is not necessary. In this method, we define a novel coordinate frame, which has one axis aligned with the current vector of the MTPA control, and estimate the frame directly. Because the parameter Lqm for estimating the frame is less affected by the magnetic saturation than the conventional Lq, the effect of magnetic saturation on the position estimation can be greatly suppressed. First, an extended electromotive force model based on the proposed frame and a parameter Lqm for an estimation of the frame are derived. Next, the effectiveness of this proposed method is confirmed by simulations and experiments.
Wen, Xiaoqiong; Li, Qian; Li, Jingsen; Ren, Chunsheng
2017-08-01
A linear relationship has been realized between the maximum streamer length and discharge voltage of a pulsed positive streamer discharge by measuring the streamer length in water with conductivity of 100 μS cm-1 using high-speed photography. Based on Ohm’s law, a quantitative equation has been derived for the dependence of the maximum streamer length on the discharge voltage of a pulsed positive streamer discharge in water. According to the equation, our results suggest that the streamers spontaneously stop propagating through water due to the voltage at the streamer head dropping below the ignition voltage of a pulsed positive streamer discharge.
Closed circle DNA algorithm of change positive-weighted Hamilton circuit problem
Zhou Kang; Tong Xiaojun; Xu Jin
2009-01-01
Chain length of closed circle DNA is equal. The same closed circle DNA's position corresponds to different recognition sequence, and the same recognition sequence corresponds to different foreign DNA segment, so closed circle DNA computing model is generalized. For change positive-weighted Hamilton circuit problem, closed circle DNA algorithm is put forward. First, three groups of DNA encoding are encoded for all arcs, and deck groups are designed for all vertices. All possible solutions axe composed. Then, the feasible solutions axe filtered out by using group detect experiment, and the optimization solutions are obtained by using group insert experiment and electrophoresis experiment. Finally, all optimization solutions are found by using detect experiment. Complexity of algorithm is concluded and validity of DNA algorithm is explained by an example. Three dominances of the closed circle DNA algorithm are analyzed, and characteristics and dominances of group delete experiment axe discussed.
17 CFR 1.46 - Application and closing out of offsetting long and short positions.
2010-04-01
... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Application and closing out of offsetting long and short positions. 1.46 Section 1.46 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE ACT Miscellaneous § 1.46 Application...
Ferreira,Amanda de Freitas; Henriques,João César Guimarães; Almeida,Guilherme de Araújo; Machado,Asbel Rodrigues; Machado, Naila Aparecida de Godoi; Fernandes Neto,Alfredo Júlio
2009-01-01
This research consisted of a quantitative assessment, and aimed to measure the possible discrepancies between the maxillomandibular positions for centric relation (CR) and maximum intercuspation (MI), using computed tomography volumetric cone beam (cone beam method). The sample of the study consisted of 10 asymptomatic young adult patients divided into two types of standard occlusion: normal occlusion and Angle Class I occlusion. In order to obtain the centric relation, a JIG device and mandi...
Impact of asymmetric lamp positioning on the performance of a closed-conduit UV reactor
Tipu Sultan
2017-06-01
Full Text Available Computational fluid dynamics (CFD analyses for the performance improvement of a closed-conduit ultraviolet (UV reactor were performed by changing the lamp positions from symmetric to asymmetric. The asymmetric lamp positioning can be useful for UV reactor design and optimization. This goal was achieved by incorporating the two performance factors, namely reduction equivalent dose (RED and system dose performance. Four cases were carried out for asymmetric lamp positioning within the UV reactor chamber and each case consisted of four UV lamps that were simulated once symmetrically and four times asymmetrically. The results of the four asymmetric cases were compared with the symmetric one. Moreover, these results were evaluated by using CFD simulations of a closed-conduit UV reactor. The fluence rate model, UVCalc3D was employed to validate the simulations results. The simulation results provide detailed information about the dose distribution, pathogen track modeling and RED. The RED value was increased by approximately 15% by using UVCalc3D fluence rate model. Additionally, the asymmetric lamp positioning of the UV lamps had more than 50% of the pathogens received a better and a higher UV dose than in the symmetric case. Consequently, the system dose performance was improved by asymmetric lamp positioning. It was concluded that the performance parameters (higher RED and system dose performance were improved by using asymmetric lamp positioning.
LELONG-DEMAILLY NUMBERS IN TERMS OF CAPACITY AND WEAK CONVERGENCE FOR CLOSED POSITIVE CURRENTS
Fredj ELKHADHRA
2013-01-01
In this paper we give a new definition of the Lelong-Demailly number in terms of the CT-capacity, where T is a closed positive current and CT is the capacity associated to T . This derived from some esimate on the growth of the CT-capacity of the sublevel sets of a weighted plurisubharmonic (psh for short) function. These estimates enable us to give another proof of the Demailly’s comparaison theorem as well as a generalization of some results due to Xing concerning the characterization of bounded psh functions. Another problem that we consider here is related to the existence of a psh function v that satisfies the equality CT (K) = RK T ∧(ddcv)p, where K is a compact subset. Finally, we give some conditions on the capacity CT that guarantees the weak convergence uk Tk·uT , for positive closed currents T, Tk and psh functions uk, u.
Uncovering labially impacted teeth: apically positioned flap and closed-eruption techniques.
Vermette, M E; Kokich, V G; Kennedy, D B
1995-01-01
The purpose of this study was to examine the esthetic and periodontal differences between two methods of uncovering labially impacted maxillary anterior teeth: the apically positioned flap and closed-eruption techniques. The sample consisted of 30 patients who were recalled a minimum of three months after orthodontic treatment of a unilateral labially impacted maxillary anterior tooth. Eighteen of the patients had undergone an apically positioned flap (APF) procedure, and the remaining twelve had undergone the closed-eruption (CE) technique. In the CE group, clinical examination showed less width of attached gingiva on the distal surface and increased probing bone level on the facial surface of the uncovered teeth relative to their contralateral controls. Uncovered teeth in the APF group showed more apical gingival margins on the mesial and facial surfaces; greater crown length on the midfacial surface; increased probing attachment level on the facial surface; increased width of attached gingiva on the facial surface; increased probing bone level on mesial, facial, and distal surfaces; and gingival scarring. Radiographic examination showed shorter roots on the uncovered teeth in both groups. Photographic examination revealed vertical relapse of the uncovered teeth in the APF group. We conclude that labially impacted maxillary anterior teeth uncovered with an apically positioned flap technique have more unesthetic sequalae than those uncovered with a closed-eruption technique.
Fyodorov, Yan V.; Doussal, Pierre Le
2016-07-01
We study three instances of log-correlated processes on the interval: the logarithm of the Gaussian unitary ensemble (GUE) characteristic polynomial, the Gaussian log-correlated potential in presence of edge charges, and the Fractional Brownian motion with Hurst index H → 0 (fBM0). In previous collaborations we obtained the probability distribution function (PDF) of the value of the global minimum (equivalently maximum) for the first two processes, using the freezing-duality conjecture (FDC). Here we study the PDF of the position of the maximum x_m through its moments. Using replica, this requires calculating moments of the density of eigenvalues in the β -Jacobi ensemble. Using Jack polynomials we obtain an exact and explicit expression for both positive and negative integer moments for arbitrary β >0 and positive integer n in terms of sums over partitions. For positive moments, this expression agrees with a very recent independent derivation by Mezzadri and Reynolds. We check our results against a contour integral formula derived recently by Borodin and Gorin (presented in the Appendix 1 from these authors). The duality necessary for the FDC to work is proved, and on our expressions, found to correspond to exchange of partitions with their dual. Performing the limit n → 0 and to negative Dyson index β → -2, we obtain the moments of x_m and give explicit expressions for the lowest ones. Numerical checks for the GUE polynomials, performed independently by N. Simm, indicate encouraging agreement. Some results are also obtained for moments in Laguerre, Hermite-Gaussian, as well as circular and related ensembles. The correlations of the position and the value of the field at the minimum are also analyzed.
Kim, Yong Won; Byun, Chun Sung; Cha, Yong Sung; Kim, Oh Hyun; Lee, Kang Hyun; Park, Il Hwan
2015-05-01
Closed tube thoracostomy is often used to evacuate a primary spontaneous pneumothorax (PSP). Occasionally, this procedure is complicated by placement of the chest tube location in the fissural area instead of pleural space. There is a paucity of studies on outcomes according to chest tube placement. As such, we investigated outcomes of chest tube placement in fissural versus pleural area in closed thoracostomy for PSP. Patients between 14 and 65 years of age who had been treated with chest tube insertion to evacuate PSP were selected based on retrospective review of medical records. Patients selected for this study received chest tube placement at either the fissural or pleural spaces. Those with pre-existing lung disease or those transferred into our hospital after closed thoracostomy were excluded. Of the 255 patients with PSP treated with chest tube insertion, 172 patients were enrolled in this study. Twenty-nine (16.9%) had fissural tube placement and 143 (83.1%) had pleural tube placement. A higher proportion of patients in the fissural versus pleural group required additional chest tube insertion (20.7% vs 4.9%, P = 0.010, respectively). There was no significant difference in body mass index, smoker status, symptom duration, number of episodes, post-thoracostomy complications, need for subsequent management, and duration of hospitalization in either group. In closed thoracostomy for PSP, there is a higher chance of tube dysfunction when the chest tube is positioned at fissural area as compared with the pleural space.
Ferreira, Amanda de Freitas; Henriques, João César Guimarães; Almeida, Guilherme Araújo; Machado, Asbel Rodrigues; Machado, Naila Aparecida de Godoi; Fernandes Neto, Alfredo Júlio
2009-01-01
This research consisted of a quantitative assessment, and aimed to measure the possible discrepancies between the maxillomandibular positions for centric relation (CR) and maximum intercuspation (MI), using computed tomography volumetric cone beam (cone beam method). The sample of the study consisted of 10 asymptomatic young adult patients divided into two types of standard occlusion: normal occlusion and Angle Class I occlusion. In order to obtain the centric relation, a JIG device and mandible manipulation were used to deprogram the habitual conditions of the jaw. The evaluations were conducted in both frontal and lateral tomographic images, showing the condyle/articular fossa relation. The images were processed in the software included in the NewTom 3G device (QR NNT software version 2.00), and 8 tomographic images were obtained per patient, four laterally and four frontally exhibiting the TMA's (in CR and MI, on both sides, right and left). By means of tools included in another software, linear and angular measurements were performed and statistically analyzed by student t test. According to the methodology and the analysis performed in asymptomatic patients, it was not possible to detect statistically significant differences between the positions of centric relation and maximum intercuspation. However, the resources of cone beam tomography are of extreme relevance to the completion of further studies that use heterogeneous groups of samples in order to compare the results.
Amanda de Freitas Ferreira
2009-01-01
Full Text Available This research consisted of a quantitative assessment, and aimed to measure the possible discrepancies between the maxillomandibular positions for centric relation (CR and maximum intercuspation (MI, using computed tomography volumetric cone beam (cone beam method. The sample of the study consisted of 10 asymptomatic young adult patients divided into two types of standard occlusion: normal occlusion and Angle Class I occlusion. In order to obtain the centric relation, a JIG device and mandible manipulation were used to deprogram the habitual conditions of the jaw. The evaluations were conducted in both frontal and lateral tomographic images, showing the condyle/articular fossa relation. The images were processed in the software included in the NewTom 3G device (QR NNT software version 2.00, and 8 tomographic images were obtained per patient, four laterally and four frontally exhibiting the TMA's (in CR and MI, on both sides, right and left. By means of tools included in another software, linear and angular measurements were performed and statistically analyzed by student t test. According to the methodology and the analysis performed in asymptomatic patients, it was not possible to detect statistically significant differences between the positions of centric relation and maximum intercuspation. However, the resources of cone beam tomography are of extreme relevance to the completion of further studies that use heterogeneous groups of samples in order to compare the results.
A closed-form expression of the positional uncertainty for 3D point clouds.
Bae, Kwang-Ho; Belton, David; Lichti, Derek D
2009-04-01
We present a novel closed-form expression of positional uncertainty measured by a near-monostatic and time-of-flight laser range finder with consideration of its measurement uncertainties. An explicit form of the angular variance of the estimated surface normal vector is also derived. This expression is useful for the precise estimation of the surface normal vector and the outlier detection for finding correspondence in order to register multiple three-dimensional point clouds. Two practical algorithms using these expressions are presented: a method for finding optimal local neighbourhood size which minimizes the variance of the estimated normal vector and a resampling method of point clouds.
Akai, Takanori; Taniguchi, Daigo; Oda, Ryo; Asada, Maki; Toyama, Shogo; Tokunaga, Daisaku; Seno, Takahiro; Kawahito, Yutaka; Fujii, Yosuke; Ito, Hirotoshi; Fujiwara, Hiroyoshi; Kubo, Toshikazu
2016-04-01
Contrast-enhanced magnetic resonance imaging with maximum intensity projection (MRI-MIP) is an easy, useful imaging method to evaluate synovitis in rheumatoid hands. However, the prognosis of synovitis-positive joints on MRI-MIP has not been clarified. The aim of this study was to evaluate the relationship between synovitis visualized by MRI-MIP and joint destruction on X-rays in rheumatoid hands. The wrists, metacarpophalangeal (MP) joints, and proximal interphalangeal (PIP) joints of both hands (500 joints in total) were evaluated in 25 rheumatoid arthritis (RA) patients. Synovitis was scored from grade 0 to 2 on the MRI-MIP images. The Sharp/van der Heijde score and Larsen grade were used for radiographic evaluation. The relationships between the MIP score and the progression of radiographic scores and between the MIP score and bone marrow edema on MRI were analyzed using the trend test. As the MIP score increased, the Sharp/van der Heijde score and Larsen grade progressed severely. The rate of bone marrow edema-positive joints also increased with higher MIP scores. MRI-MIP imaging of RA hands is a clinically useful method that allows semi-quantitative evaluation of synovitis with ease and can be used to predict joint destruction.
Alarid Elaine T
2010-09-01
Full Text Available Abstract Background Sin3A is an evolutionarily conserved transcriptional repressor which regulates gene expression as part of the multi-protein Sin3 repressive complex. It functions as a scaffold upon which proteins with enzymatic activity dock, including chromatin modifying histone deacetylases. Although regulation of transcription by Sin3A has been studied in detail, little is understood about the function of Sin3A in cancer cells. We previously showed that Sin3A is expressed in breast cancer cells and is a repressor of estrogen receptor-alpha (ERα, ESR1 gene expression. Here, we expand our previous studies to elucidate the function of Sin3A in the control of gene expression and growth of breast cancer cells. Results Analysis of gene expression following knockdown of Sin3A revealed changes in both basal and regulated gene transcription. Genes of known importance in breast cancer and estrogen signaling, including ERBB2, PGR, MYC, CLU, and NCOA2, were among those identified as Sin3A-responsive. The mechanism of Sin3A action varied among genes and was found to be mediated through both HDAC1/2 -dependent and -independent activities. Loss of Sin3A inhibited breast cancer cell growth by increasing apoptosis without affecting cell cycle progression. Analysis of both ERα-positive and ERα-negative cell lines revealed that the effects of Sin3A on growth were cell-type specific, as Sin3A expression promoted maximum growth of only the ERα-positive cells, and, notably, Sin3A protein itself was increased by estrogen. Further gene expression experiments revealed that Sin3A repressed expression of key apoptotic genes, including TRAIL, TRAILR1, CASP10, and APAF1, in ERα-positive, but not ERα-negative, cell lines, which could provide a mechanistic explanation for cell-type differences in growth. Conclusions This study identifies Sin3A as a regulator of gene expression, survival, and growth in ERα-positive breast cancer cells. Sin3A regulates the
A closed-loop phase-locked interferometer for wide bandwidth position sensing
Fleming, Andrew J., E-mail: Andrew.Fleming@Newcastle.edu.au; Routley, Ben S., E-mail: Ben.Routley@Newcastle.edu.au [School of Electrical Engineering and Computer Science, University of Newcastle, Callaghan, NSW 2308 (Australia)
2015-11-15
This article describes a position sensitive interferometer with closed-loop control of the reference mirror. A calibrated nanopositioner is used to lock the interferometer phase to the most sensitive point in the interferogram. In this configuration, large low-frequency movements of the sensor mirror can be detected from the control signal applied to the nanopositioner and high-frequency short-range signals can be measured directly from the photodiode. It is demonstrated that these two signals are complementary and can be summed to find the total displacement. The resulting interferometer has a number of desirable characteristics: it is optically simple, does not require polarization or modulation to detect the direction of motion, does not require fringe-counting or interpolation electronics, and has a bandwidth equal to that of the photodiode. Experimental results demonstrate the frequency response analysis of a high-speed positioning stage. The proposed instrument is ideal for measuring the frequency response of nanopositioners, electro-optical components, MEMs devices, ultrasonic devices, and sensors such as surface acoustic wave detectors.
FRET enhancement close to gold nanoparticles positioned in DNA origami constructs.
Aissaoui, Nesrine; Moth-Poulsen, Kasper; Käll, Mikael; Johansson, Peter; Wilhelmsson, L Marcus; Albinsson, Bo
2017-01-05
Here we investigate the energy transfer rates of a Förster resonance energy transfer (FRET) pair positioned in close proximity to a 5 nm gold nanoparticle (AuNP) on a DNA origami construct. We study the distance dependence of the FRET rate by varying the location of the donor molecule, D, relative to the AuNP while maintaining a fixed location of the acceptor molecule, A. The presence of the AuNP induces an alteration in the spontaneous emission of the donor (including radiative and non-radiative rates) which is strongly dependent on the distance between the donor and AuNP surface. Simultaneously, the energy transfer rates are enhanced at shorter D-A (and D-AuNP) distances. Overall, in addition to the direct influence of the acceptor and AuNP on the donor decay there is also a significant increase in decay rate not explained by the sum of the two interactions. This leads to enhanced energy transfer between donor and acceptor in the presence of a 5 nm AuNP. We also demonstrate that the transfer rate in the three "particle" geometry (D + A + AuNP) depends approximately linearly on the transfer rate in the donor-AuNP system, suggesting the possibility to control FRET process with electric field induced by 5 nm AuNPs close to the donor fluorophore. It is concluded that DNA origami is a very versatile platform for studying interactions between molecules and plasmonic nanoparticles in general and FRET enhancement in particular.
Sreekar Kumar Reddy.R
2014-09-01
Full Text Available Background: Patellofemoral pain syndrome is a very common disorder. 90% of the general population has some degree of pathologic changes of the patellofemoral joint. Knowledge regarding the cause and prevention of patellofemoral pain syndrome is essential. Therefore the purpose of this study is intended to know whether different foot positions alter Vastus Medialis Oblique and Vastus Lateralis that leads to dysfunctions of knee joint. Method: 30 subjects are included in study and investigated foot in different foot positions are in neutral, pronated and supinated foot positions and performed maximum voluntary isometric contractions are recorded with electromyography. Results: EMG amplitudes (microvolts of VL and VMO at three different weight bearing positions of foot during maximum voluntary contraction analysis by using one-way Analysis of Variance. Mean amplitudes of foot positions in pronation shown significant difference while comparing with neutral and supination. Conclusion: The VMO and VL activity shows significant difference in the pronated foot weight bearing position compared to the neutral and supinated foot. Performing the maximum voluntary isometric contractions of VMO and VL with pronated foot elicited significantly higher EMG activity compared to Neutral or supinated weight bearing positions of foot. The results of this study also suggested that for patellofemoral pain which is caused by pronated foot can be treat with by using the soft foot orthoses
A hybrid MAS/MoM technique for 2D impedance scatterers illuminated by closely positioned sources
Larsen, Niels Vesterdal; Breinbjerg, Olav
2005-01-01
A hybrid technique for 2D scattering problems with impedance structures and closely positioned illuminating sources is presented. This technique combines the method of auxiliary sources (MAS) with a localized method of moments (MoM) region near the source. Significant improvements over standard MAS...
A closed-form method for single-point positioning with six satellites in dual-GNSS constellations
Teng, Yunlong; Huang, Qi; Ao, Yongcai; Li, Yun
2016-12-01
With the impact of the Global Navigation Satellite System (GNSS), dual-GNSS constellations are playing an increasingly significant role in positioning, navigation and timing (PNT) applications. Aiming at improving from the existing method, i.e., linearization, of solving the single-point positioning problem under a dual-GNSS, this paper develops a closed-form method for solving PNT problems in the case of six satellites. This method reduces the positioning problem to a simple mathematical problem of finding solutions to a quadratic equation, thereby needing only one receiver clock bias (RCB) as variable. By solving the RCB, the positioning information in three dimensions is obtained by utilizing a linear equation. Compared with the existing method, the closed-form method requires no initial position or iterations. This method thus provides a direct solution to single-point positioning. Further, how to check the uniqueness and the validity of the solutions is also derived. Experimental results verify the validity, applicability and efficiency of the proposed method.
Zurlo, A; Hagelberg, J; Desidera, S; Chauvin, G; Almenara, J M; Biazzo, K; Bonnefoy, M; Carson, J C; Covino, E; Delorme, P; D'Orazi, V; Gratton, R; Mesa, D; Messina, S; Moutou, C; Segransan, D; Turatto, M; Udry, S; Wildi, F
2013-01-01
As is the case for all techniques involved in the research for exoplanets, direct imaging has to take into account the probability of so-called astrophysical false positives, which are phenomena that mimic the signature of objects we are seeking. In this work we aim to present a case of a false positive found during a direct imaging survey conducted with VLT/NACO. A promising exoplanet candidate was detected around the K2-type star HD\\,8049 in July 2010.Its contrast of $\\Delta H$=7.05 at 1.57 arcsec allowed us to guess the presence of a 35 \\MJup companion at 50 projected AU, for the nominal system age and heliocentric distance.To check whether it was gravitationally bound to the host star, as opposed to an unrelated background object, we re-observed the system one year later and concluded a high probability of a bound system. We also used radial velocity measurements of the host star, spanning a time range of $\\sim$ 30 yr, to constrain the companion's mass and orbital properties, as well as to probe the host ...
Zurlo, A.; Vigan, A.; Hagelberg, J.; Desidera, S.; Chauvin, G.; Almenara, J. M.; Biazzo, K.; Bonnefoy, M.; Carson, J. C.; Covino, E.; Delorme, P.; D'Orazi, V.; Gratton, R.; Mesa, D.; Messina, S.; Moutou, C.; Segransan, D.; Turatto, M.; Udry, S.; Wildi, F.
2013-06-01
Context. As is the case for all techniques involved in the research for exoplanets, direct imaging has to take into account the probability of so-called astrophysical false positives, which are phenomena that mimic the signature of the objects we are seeking. Aims: In this work we present the case of a false positive found during a direct-imaging survey conducted with VLT/NACO. A promising exoplanet candidate was detected around the K2-type star HD 8049 in July 2010. Its contrast of ΔH = 7.05 at 1.57 arcsec allowed us to assume a 35 MJup companion at 50 projected AU, for the nominal system age and heliocentric distance. Methods: To check whether it was gravitationally bound to the host star, as opposed to an unrelated background object, we re-observed the system one year later and concluded a high probability of a bound system. We also used radial velocity measurements of the host star, spanning a time range of ~30 yr, to constrain the companion's mass and orbital properties, as well as to probe the host star's spectral age indicators and general spectral energy distribution. We also obtained U-band imaging with EFOSC and near-infrared spectroscopy for the companion. Results: Combining all these information we conclude that the companion of HD 8049 is a white dwarf (WD) with temperature Teff = 18 800 ± 2100 K and mass MWD = 0.56 ± 0.08 M⊙. The significant radial velocity trend combined with the imaging data indicates that the most probable orbit has a semi-major axis of about 50 AU. The discrepancy between the age indicators speaks against a bona-fide young star. The moderately high level of chromospheric activity and fast rotation, mimicking the properties of a young star, might be induced by the exchange of mass with the progenitor of the WD. This example demonstrates some of the challenges in determining accurate age estimates and identifications of faint companions. Based on observations collected at La Silla and Paranal Observatory, ESO (Chile): Programs
Kim, Yi Jun; Lee, Kyung Ja; Park, Kyung Ran [Dept. of Radiation Oncology, (Korea, Republic of); and others
2015-06-15
To analyze prognostic factors for locoregional recurrence (LRR), distant metastasis (DM), and overall survival (OS) in cervical cancer patients who underwent radical hysterectomy followed by postoperative radiotherapy (PORT) in a single institute. Clinicopathologic data of 135 patients with clinical stage IA2 to IIA2 cervical cancer treated with PORT from 2001 to 2012 were reviewed, retrospectively. Postoperative parametrial resection margin (PRM) and vaginal resection margin (VRM) were investigated separately. The median treatment dosage of external beam radiotherapy (EBRT) to the whole pelvis was 50.4 Gy in 1.8 Gy/fraction. High-dose-rate vaginal brachytherapy after EBRT was given to patients with positive or close VRMs. Concurrent platinum-based chemoradiotherapy (CCRT) was administered to 73 patients with positive resection margin, lymph node (LN) metastasis, or direct extension of parametrium. Kaplan-Meier method and log-rank test were used for analyzing LRR, DM, and OS; Cox regression was applied to analyze prognostic factors. The 5-year disease-free survival was 79% and 5-year OS was 91%. In univariate analysis, positive or close PRM, LN metastasis, direct extension of parametrium, lymphovascular invasion, histology of adenocarcinoma, and chemotherapy were related with more DM and poor OS. In multivariate analysis, PRM and LN metastasis remained independent prognostic factors for OS. PORT after radical hysterectomy in uterine cervical cancer showed excellent OS in this study. Positive or close PRM after radical hysterectomy in uterine cervical cancer correlates with poor prognosis even with CCRT. Therefore, additional treatments to improve local control such as radiation boosting need to be considered.
A novel form of {open_quotes}Tyrosinase-positive{close_quotes} oculocutaneous albinism
Fukai, K.; Lee, S.T.; Bundey, S.; Spritz, R.A. [Univ. of Wisconsin, Madison, WI (United States)]|[Birmingham Maternity Hospital, Birmingham (United Kingdom)
1994-09-01
Tyrosinase-positive oculocutaneous albinism (ty-pos OCA) is an autosomal recessive disorder in which the biosynthesis of melanin pigment is greatly reduced in the skin, hair, and eyes. We have shown that typical ty-pos OCA (OCA2) results from mutations of the P gene in chromosome segment 15q11-q13. We have also shown that some patients diagnosed with ty-pos OCA actually have mild forms of type I OCA (OCAI), resulting from mutations at the tyrosinase (TYR) gene at 11q14-q21. However, in about one-third of patients with ty-pos OCA we have failed to identify abnormalities of either the P or TYR genes, suggesting the possible existence of a third ty-pos OCA locus. To test this hypothesis, we investigated a large, complex, inbred Pakistani kindred. Affected individuals exhibit slight skin pigmentation with no tanning, hair that is silver at birth and darkens somewhat over time, brown irides, and reduced visual acuity with nystagmus. SSCP/heteroduplex screening and complete DNA sequence analysis of TYR gene in the proband identified no abnormalities, and analysis of a CA repeat in the TYR gene promoter showed no linkage of ty-pos OCA to this marker in this kindred. SSCP/ heteroduplex screening of the P gene also detected no abnormalities, and the (inbred) proband was heterozygous for numerous intragenic polymorphisms. These data thus exclude TYP and P. We next carried out genetic linkage analyses and homozygisty mapping using various SSLP repeats at the locations of the human homologues of the mouse brown (TYRP, 9p23), slaty (13q32), and silver (12pter-q21) genes, all of which are associated with generalized hypopigmentation in mutant animals. However, we found no evidence of linkage of any of these markers. We are currently carrying out similar analyses using markers near the putative locations of the human homologues of several other mouse hypopigmentation genes in an effort to map this novel human ty-pos OCA locus.
THE ROLE OF KNEE POSITIONING AND RANGE-OF-MOTION ON THE CLOSED-STANCE FOREHAND TENNIS SWING
Steven M. Nesbit
2008-03-01
Full Text Available This paper discusses the role of knee positioning and range-of- motion on the closed-stance forehand tennis swing. The analyses of tennis swing mechanics were performed using a computer model comprised of a full-body model of a human and an inertial model of a racket. The model was driven by subject forehand swings (16 female college-level subjects recorded with a high-speed digital motion analysis system. The study discovered that both initial knee positioning and range-of-motion were positively related to racket velocity and characteristic of more skilled players. The direct effects of knee positioning and range-of-motion on racket movement are minimal, however there are several indirect biomechanical effects on the forehand motion such as movement of the body mass center, work of the knee, hip and back joints, and the angular range-of-motion of the hips and torso. Some of these indirect effects were related to racket velocity and characteristic of more skilled players. Factors that influenced knee positioning and range-of-motion include years of playing, amount of coaching, and body style. Efforts to both increase and restrict the knee movements of the subjects resulted in substantially lower racket velocities (and other detrimental biomechanical effects implying that there may be optimal knee positions and range-of-motion for a given subject. The most skilled subject exhibited a high degree of consistency of knee positioning and range-of-motion. This subject adjusted for varying ball height through modified initial knee positioning while maintaining fairly constant ranges-of-motion
Söderström, P A; Regan, P H; Algora, A; de Angelis, G; Ashley, S F; Aydin, S; Bazzacco, D; Casperson, R J; Catford, W N; Cederkäll, J; Chapman, R; Corradi, L; Fahlander, C; Farnea, E; Fioretto, E; Freeman, S J; Gadea, A; Gelletly, W; Gottardo, A; Grodner, E; He, C Y; Jones, G A; Keyes, K; Labiche, M; Liang, X; Liu, Z; Lunardi, S; Muarginean, N; Mason, P; Menegazzo, R; Mengoni, D; Montagnoli, G; Napoli, D; Ollier, J; Pietri, S; Podolyák, Z; Pollarolo, G; Recchia, F; Şahin, E; Scarlassara, F; Silvestri, R; Smith, J F; Spohr, K M; Steer, S J; Stefanini, A M; Szilner, S; Thompson, N J; Tveten, G M; Ur, C A; Valiente-Dobón, J J; Werner, V; Williams, S J; Xu, F R; Zhu, J Y
2010-01-01
The yrast sequence of the neutron-rich dysprosium isotope Dy-168 has been studied using multi-nucleon transfer reactions following the collision of a 460-MeV Se-82 beam and a Er-170 target. The reaction products were identified using the PRISMA magnetic spectrometer and the gamma rays detected using the CLARA HPGe-detector array. The 2+ and 4+ members of the previously measured ground state rotational band of Dy-168 was confirmed and the yrast band extended up to 10+. A tentative candidate for the 4+ to 2+ transition in Dy-170 was also identified. The data on this and lighter even-even dysprosium isotopes are interpreted in terms of Total Routhian Surface calculations and the evolution of collectivity approaching the proton-neutron valence product maximum is discussed.
Wang, Lejing; Zou, Rui; Weidert, Simon; Landes, Juergen; Euler, Ekkehard; Burschka, Darius; Navab, Nassir
2011-03-01
For trauma and orthopedic surgery, maneuvering a mobile C-arm X-ray device into a desired position in order to acquire the right picture is a routine task. The precision and ease of use of the C-arm positioning becomes even more important for more advanced imaging techniques as parallax-free X-ray image stitching, for example. Standard mobile C-arms have only five degrees of freedom (DOF), which definitely restricts their motions that have six DOF in 3D Cartesian space. We have proposed a method to model the kinematics of the mobile Carm and operating table as an integrated 6DOF C-arm X-ray imaging system.1 This enables mobile C-arms to be positioned relative to the patient's table with six DOF in 3D Cartesian space. Moving mobile C-arms to a desired position and orientation requires finding the necessary joint values, which is an inverse kinematics problem. In this paper, we present closed-form solutions, i.e. analytic expressions, obtained in an algebraic way for the inverse kinematics problem of the 6DOF C-arm model. In addition, we implement a 6DOF C-arm system for interactively radiation-free C-arm positioning based on a continuous guidance from C-arm pose estimation. For this we employ a visual marker pattern attached under the operating table and a mobile C-arm system augmented by a video camera and mirror construction. In our experiment, repositioning C-arm to a pre-defined pose in a phantom study demonstrates the practicality and accuracy of our developed 6DOF C-arm system.
S. Rittidech
2007-01-01
Full Text Available This article describes the effects of varying bond numbers (Bo and aspect ratios (Le/d on flow pattern of a close-end oscillating heat-pipe (CEOHP. The CEOHPs used employed a glass tube with inside diameter of 3 mm. The length of evaporator of 100 and 150 mm (the lengths of evaporator adiabatic and condenser section were equal were employed with 10 turns. Observation of the flow pattern was conducted at 90° from the horizontal plane, with bond numbers of 1.8 and 2.6 with aspect ratios of 33.3 and 50. R141b and ethanol were used as the working fluids with filling ratio of 50% of internal volume of tube. The evaporator section was heated by heater and the condenser section was cooled by distilled water. The working temperature was controlled at 50°C. The temperature at adiabatic section and the inlet-outlet of distilled water at condenser section were recorded. The photographs of flow patterns at specific times were recorded at evaporator section by a digital camera and video camera were used to observe the flow patterns at evaporator section condenser together with adiabatic section and total part of CEOHP. It was found that the maximum heat flux occurred with Le/d 33 and Bo 2.6 an inside phenomena occurred is a dispersed bubble flow and slug flow.
Inaniwa, Taku; Kohno, Toshiyuki; Tomitani, Takehiro
2005-12-21
In radiation therapy with hadron beams, conformal irradiation to a tumour can be achieved by using the properties of incident ions such as the high dose concentration around the Bragg peak. For the effective utilization of such properties, it is necessary to evaluate the volume irradiated with hadron beams and the deposited dose distribution in a patient's body. Several methods have been proposed for this purpose, one of which uses the positron emitters generated through fragmentation reactions between incident ions and target nuclei. In the previous paper, we showed that the maximum likelihood estimation (MLE) method could be applicable to the estimation of beam end-point from the measured positron emitting activity distribution for mono-energetic beam irradiations. In a practical treatment, a spread-out Bragg peak (SOBP) beam is used to achieve a uniform biological dose distribution in the whole target volume. Therefore, in the present paper, we proposed to extend the MLE method to estimations of the position of the distal and proximal edges of the SOBP from the detected annihilation gamma ray distribution. We confirmed the effectiveness of the method by means of simulations. Although polyethylene was adopted as a substitute for a soft tissue target in validating the method, the proposed method is equally applicable to general cases, provided that the reaction cross sections between the incident ions and the target nuclei are known. The relative advantage of incident beam species to determine the position of the distal and the proximal edges was compared. Furthermore, we ascertained the validity of applying the MLE method to determinations of the position of the distal and the proximal edges of an SOBP by simulations and we gave a physical explanation of the distal and the proximal information.
Kinkhabwala, Ali
2013-01-01
The most fundamental problem in statistics is the inference of an unknown probability distribution from a finite number of samples. For a specific observed data set, answers to the following questions would be desirable: (1) Estimation: Which candidate distribution provides the best fit to the observed data?, (2) Goodness-of-fit: How concordant is this distribution with the observed data?, and (3) Uncertainty: How concordant are other candidate distributions with the observed data? A simple unified approach for univariate data that addresses these traditionally distinct statistical notions is presented called "maximum fidelity". Maximum fidelity is a strict frequentist approach that is fundamentally based on model concordance with the observed data. The fidelity statistic is a general information measure based on the coordinate-independent cumulative distribution and critical yet previously neglected symmetry considerations. An approximation for the null distribution of the fidelity allows its direct conversi...
基于最大熵模型的词位标注汉语分词%Chinese Word Segmentation via Word-position Tagging Based on Maximum Entropy Model
于江德; 王希杰; 樊孝忠
2011-01-01
The performance of Chinese word segmentation has been greatly improved by word-position-based approaches in recent years.This approach treated Chinese word segmentation as a word-position tagging.With the help of powerful sequence tagging model, word-position-based method quickly rose as a mainstream technique in this field.Feature template selection and tag sets selection was crucial in this method.The technique was studied via using different word-positions tag sets and maximum entropy model.Closed evaluations were performed on corpus from the second international Chinese word segmentation Bakeoff-2005, and comparative experiments were performed on different tag sets and feature templates.Experimental results showed that the feature template set TMPT-6 and six word-position tag sets was much better than the other.%近年来基于字的词位标注汉语分词方法极大地提高了分词的性能,该方法将汉语分词转化为字的词位标注问题,借助于优秀的序列标注模型,词位标注汉语分词逐渐成为汉语分词的主要技术路线.该方法中特征模板集设定和词位标注集的选择至关重要,采用不同的词位标注集,使用最大熵模型进一步研究了词位标注汉语分词技术.在国际汉语分词评测Bakeoff2005的语料上进行了封闭测试,并对比了不同词位标注集对分词性能的影响.实验表明所采用的六词位标注集配合相应的特征模板集TMPT-6较其他词位标注集分词性能要好.
Sierakowski, Adam J.; Lukassen, Laura J.
2016-11-01
In the shear flow of non-Brownian particles, we describe the long-time diffusive processes stochastically using a Fokker-Planck equation. Previous work has indicated that a Fokker-Planck equation coupling the probability densities of position and velocity spaces may be appropriate for describing this phenomenon. The stochastic description, integrated over velocity space to obtain a reduced position-space Fokker-Planck equation, contains unknown space diffusion coefficients. In this work, we use the Physalis method for simulating disperse particle flows to verify the colored-noise velocity space model (an Ornstein-Uhlenbeck process) by comparing the simulated long-time diffusion rate with the diffusion rate proposed by the theory. We then use the simulated data to calculate the unknown space diffusion coefficients that appear in the reduced position-space Fokker-Planck equation and summarize the results. This study was partially supported by US NSF Grant CBET1335965.
Birmingham, T B; Kramer, J F; Inglis, J T; Mooney, C A; Murray, L J; Fowler, P J; Kirkley, S
1998-01-01
The primary objective of the present study was to compare the effect of a neoprene sleeve on knee joint position sense during a sitting open kinetic chain test and a supine closed kinetic chain test. Young (24 +/- 2 years old), healthy subjects (18 men and 18 women) performed knee joint angle replication tests during open kinetic chain knee extension (sitting) and closed kinetic chain leg press (supine with an axial load of 15% body weight) before and after application of a neoprene sleeve over the dominant knee. The improvement in ability to replicate joint angles after application of the sleeve (sleeve effect) was significantly less during the supine closed kinetic chain test (0.3 degree +/- 1.4 degrees) than during the sitting open kinetic chain test (1.2 degrees +/- 1.1 degrees). The sleeve effect was inversely related to subjects' performance without the sleeve during both the sitting open kinetic chain and supine closed kinetic chain tests, suggesting that some people may derive greater benefit from the sleeve than others. Although the sleeve effects were small, particularly during the supine closed kinetic chain test, 72% of subjects felt that the sleeve improved their overall test performance. Future research is needed to establish the functional relevance of the small sleeve effects observed and to identify the characteristics of people who might derive greatest benefit from sleeve use.
Hasina Samji
Full Text Available Combination antiretroviral therapy (ART has significantly increased survival among HIV-positive adults in the United States (U.S. and Canada, but gains in life expectancy for this region have not been well characterized. We aim to estimate temporal changes in life expectancy among HIV-positive adults on ART from 2000-2007 in the U.S. and Canada.Participants were from the North American AIDS Cohort Collaboration on Research and Design (NA-ACCORD, aged ≥20 years and on ART. Mortality rates were calculated using participants' person-time from January 1, 2000 or ART initiation until death, loss to follow-up, or administrative censoring December 31, 2007. Life expectancy at age 20, defined as the average number of additional years that a person of a specific age will live, provided the current age-specific mortality rates remain constant, was estimated using abridged life tables.The crude mortality rate was 19.8/1,000 person-years, among 22,937 individuals contributing 82,022 person-years and 1,622 deaths. Life expectancy increased from 36.1 [standard error (SE 0.5] to 51.4 [SE 0.5] years from 2000-2002 to 2006-2007. Men and women had comparable life expectancies in all periods except the last (2006-2007. Life expectancy was lower for individuals with a history of injection drug use, non-whites, and in patients with baseline CD4 counts <350 cells/mm(3.A 20-year-old HIV-positive adult on ART in the U.S. or Canada is expected to live into their early 70 s, a life expectancy approaching that of the general population. Differences by sex, race, HIV transmission risk group, and CD4 count remain.
Rasoolizadeh, Asieh; Goulet, Marie-Claire; Sainsbury, Frank; Cloutier, Conrad; Michaud, Dominique
2016-04-01
A causal link has been reported between positively selected amino acids in plant cystatins and the inhibitory range of these proteins against insect digestive cysteine (Cys) proteases. Here we assessed the impact of single substitutions to closely related amino acids on the contribution of positive selection to cystatin diversification. Cystatin sequence alignments, while confirming hypervariability, indicated a preference for related amino acids at positively selected sites. For example, the non-polar residues leucine (Leu), isoleucine (Ile) and valine (Val) were shown to predominate at positively selected site 2 in the N-terminal region, unlike selected sites 6 and 10, where polar residues are preferred. The model cystatin SlCYS8 and single variants with Leu, Ile or Val at position 2 were compared with regard to their ability to bind digestive proteases of the coleopteran pest Leptinotarsa decemlineata and to induce compensatory responses in this insect. A functional proteomics procedure to capture target Cys proteases in midgut extracts allowed confirmation of distinct binding profiles for the cystatin variants. A shotgun proteomics procedure to monitor whole Cys protease complements revealed protease family specific compensatory responses in the insect, dependent on the variant ingested. Our data confirm the contribution of closely related amino acids to the functional diversity of positively selected plant cystatins in a broader structure/function context imposing physicochemical constraints to primary structure alterations. They also underline the complexity of protease/inhibitor interactions in plant-insect systems, and the challenges still to be met in order to harness the full potential of ectopically expressed protease inhibitors in crop protection.
Völker, Christoph; Köhler, Peter
2013-12-01
We explore the impact of a latitudinal shift in the westerly wind belt over the Southern Ocean on the Atlantic meridional overturning circulation (AMOC) and on the carbon cycle for Last Glacial Maximum background conditions using a state-of-the-art ocean general circulation model. We find that a southward (northward) shift in the westerly winds leads to an intensification (weakening) of no more than 10% of the AMOC. This response of the ocean physics to shifting winds agrees with other studies starting from preindustrial background climate, but the responsible processes are different. In our setup changes in AMOC seemed to be more pulled by upwelling in the south than pushed by downwelling in the north, opposite to what previous studies with different background climate are suggesting. The net effects of the changes in ocean circulation lead to a rise in atmospheric pCO2 of less than 10 μatm for both northward and southward shift in the winds. For northward shifted winds the zone of upwelling of carbon- and nutrient-rich waters in the Southern Ocean is expanded, leading to more CO2outgassing to the atmosphere but also to an enhanced biological pump in the subpolar region. For southward shifted winds the upwelling region contracts around Antarctica, leading to less nutrient export northward and thus a weakening of the biological pump. These model results do not support the idea that shifts in the westerly wind belt play a dominant role in coupling atmospheric CO2 rise and Antarctic temperature during deglaciation suggested by the ice core data.
Staines-Urías, Francisca; Seidenkrantz, Marit-Solveig; Fischel, Andrea; Kuijpers, Antoon
2017-04-01
The elemental composition of sediments from gravity core HOLOVAR11-03 provides a ca. 40 ka record of past climate variability in the Strait of Yucatan, between the Caribbean Sea and the Gulf of Mexico, a region where precipitation variability is determined by the seasonal position of the Intertropical Convergence Zone (ITCZ). Within this region, sea level pressure decreases and rainfall increases as the ITCZ moves north of the equator in response to increased solar insolation in the Northern Hemisphere during boreal summer. In contrast, as the ITCZ retracts southward towards the equator during boreal winter, rainfall diminishes and the regional sea level pressure gradient strengthens. On interannual, multidecadal and millennial timescales, fluctuations in the average latitudinal position of the ITCZ in response to insolation forcing modulate the intensity and duration of the seasonal regimens, determining average regional precipitation and, ultimately, the elemental composition of the marine sedimentary record. Regionally, higher titanium and iron content in marine sediments reflect greater terrigenous input from inland runoff, indicating greater precipitation, hence a more northerly position of the ITCZ. Correspondingly, Ti and Fe concentration data were used to reconstruct regional rainfall variability since the Last Glacial Maxima (LGM ˜24 cal ka BP). HOLOVAR11-03 age model (based on 4 AMS 14C dates obtained from multi-specific samples of planktic foraminifera) shows stable sedimentation rates in the area throughout the cored period. Nonetheless, higher terrestrial mineral input is observed since the LGM and all through the last glacial termination (24 to 12 cal ka BP), indicating a period of increased precipitation. In contrast, lower Ti and Fe values are typical for the period between 12 and 8 cal ka BP, indicating reduced precipitation. A positive trend characterizes the following interval, showing a return to wetter conditions lasting until 5 cal ka BP
James Yu-Chang Liao
2015-07-01
Full Text Available Brain-Computer Interfaces (BCIs that convert brain-recorded neural signals into intended movement commands could eventually be combined with Functional Electrical Stimulation to allow individuals with Spinal Cord Injury to regain effective and intuitive control of their paralyzed limbs. To accelerate the development of such an approach, we developed a model of closed-loop BCI control of arm movements that (1 generates realistic arm movements (based on experimentally measured, visually-guided movements with real-time error correction, (2 simulates cortical neurons with firing properties consistent with literature reports, and (3 decodes intended movements from the noisy neural ensemble. With this model we explored (1 the relative utility of neurons tuned for different movement parameters (position, velocity, and goal and (2 the utility of recording from larger numbers of neurons – critical issues for technology development and for determining appropriate brain areas for recording. We simulated arm movements that could be practically restored to individuals with severe paralysis, i.e., movements from an armrest to a volume in front of the person. Performance was evaluated by calculating the smallest movement endpoint target radius within which the decoded cursor position could dwell for one second. Our results show that goal, position, and velocity neurons all contribute to improve performance. However, velocity neurons enabled smaller targets to be reached in shorter amounts of time than goal or position neurons. Increasing the number of neurons also improved performance, although performance saturated at 30-50 neurons for most neuron types. Overall, our work presents a closed-loop BCI simulator that models error corrections and the firing properties of various movement-related neurons that can be easily modified to incorporate different neural properties. We anticipate that this kind of tool will be important for development of future BCIs.
Campos, Fabiana V; Chanda, Baron; Roux, Benoît; Bezanilla, Francisco
2007-05-01
It is now well established that the voltage-sensing S4 segment in voltage-dependent ion channels undergoes a conformational change in response to varying membrane potential. However, the magnitude of the movement of S4 relative to the membrane and the rest of the protein remains controversial. Here, by using histidine scanning mutagenesis in the Shaker K channel, we identified mutants I241H (S1 segment) and I287H (S2 segment) that generate inward currents at hyperpolarized potentials, suggesting that these residues are part of a hydrophobic plug that separates the water-accessible crevices. Additional experiments with substituted cysteine residues showed that, at hyperpolarized potentials, both I241C and I287C can spontaneously form disulphide and metal bridges with R362C, the position of the first charge-carrying residue in S4. These results constrain unambiguously the closed-state positions of the S4 segment with respect to the S1 and S2 segments, which are known to undergo little or no movement during gating. To satisfy these constraints, the S4 segment must undergo an axial rotation of approximately 180 degrees and a transmembrane (vertical) movement of approximately 6.5 A at the level of R362 in going from the open to the closed state of the channel, moving the gating charge across a focused electric field.
Ujwal Bhattacharya
2015-06-01
Full Text Available Background: Patello femoral pain syndrome is one of the most common musculoskeletal disorders and is reported to affect 15% - 33% of an active adult population and 21%-45% of adolescents thereby decreasing the work capacity of an individual. Patello femoral pain syndrome as implicated is due to inappropriate neural control of the quadriceps femoris muscle. Since Vastus medialis muscle is regarded as the dynamic medial stabilizer of patella so it’s important to understand the activation of Vastus Medialis Oblique’s in patients with patello femoral pain syndrome The purpose of this study is to assess the activation of Vastus Medialis Oblique’s at different knee angles between closed kinetic chain position and open kinetic chain position and the information thus gained can be used to design training program aimed at controlling patello femoral joint dysfunction. Methods: Thirty subjects with patello femoral pain syndrome (assessed through history and examination were assigned to two groups. Group A was made to perform open kinetic chain activity(i.e. sitting on high plinth and Group B was made to perform a closed kinetic chain activity(i.e. standing The outcome measure were amplitude and duration. Analyses were performed using independent t-Test. Results: Significant difference was found between the groups for amplitude and duration at varying angles. Amplitude: 0 degree (p=0.004, 60 degrees (p=0.015, 90 degrees (p=0.004. Duration: 0 degree (p=0.007, 60 degrees (p=0.008,90 degrees (p=0.002 Conclusion: Based on the outcome of the study it’s concluded that there is greater activation of Vastus Medialis Oblique’s muscle while performing close kinetic chain activity than in open kinetic chain.
Ming Shi
Full Text Available The aim of this study was to assess the effect of 48-week entecavir therapy on serum and intrahepatic hepatitis B virus, covalently closed circular DNA (HBV cccDNA levels in hepatitis B e antigen (HBeAg-positive patients. A total of 120 patients with HBeAg-positive chronic hepatitis were treated with entecavir for 48 weeks. Serum HBV markers, total HBV DNA, and HBV cccDNA levels were measured at baseline and week 48. Biopsies from 20 patients were available for both intrahepatic total HBV DNA and cccDNA testing at these timepoints. HBV cccDNA levels were decreased from a median level of 5.1×106 copies/mL at baseline to a median level of 2.4×103 copies/mL at week 48. Reduction magnitudes of HBV cccDNA in patients with normalized alanine aminotransferase levels and those undergoing HBeAg seroconversion were significantly greater than those in alanine aminotransferase-abnormal and HBeAg positive patients. Intrahepatic HBV cccDNA was decreased significantly after 48 weeks of treatment, but could not be eradicated. In conclusion, treatment of HBeAg-positive hepatitis B patients with entecavir for 48 weeks decreased serum and intrahepatic HBV cccDNA significantly, and the magnitude of HBV cccDNA reduction was related to total HBV DNA decrease, alanine aminotransferase normalization, and HBeAg seroconversion.
和东平; 韩贺永; 黄庆学; 王君; 张晓民; 李佳
2016-01-01
The electro-hydraulic position servo control model and electro-hydraulic force servo control model are es-tablished respectively based on AMEsim,and the dynamic simulation is carried out.The position step response curve and the force step response curve are obtained by adjusting the appropriate PID parameters and the advanta-ges and the disadvantages of the two control methods have been given.And the double loop limit amplitude transfer strategy of the full-hydraulic leveler is further put forward,when a loop is in the working state and another loop is al-ways in the saturated state through the working of limiter,the smooth transition of the double loop is ultimately realized.The transfer strategy which whether it is that the position closed loop turns to force loop or that force closed loop turns to position closed loop can be achieved smoothly through simulation analysis.At last,the feasibility and effec-tiveness of the proposed transfer strategy is verified by using the method of master slave synchronization in the two-cylinder synchronous test rig at the laboratory,and the transfer strategy has important guiding significance to the production.%基于AMEsim分别建立了全液压矫直机电液位置伺服控制模型和电液力伺服控制模型，并分别对其进行了动态仿真研究，通过调整合适的PID参数，得到了位置阶跃响应曲线和力阶跃响应曲线，明确了二者控制的优缺点。并且进一步提出了全液压矫直机的双环限幅转换策略，通过限幅器的作用，当一个环处于工作状态的时候另一个环始终处于饱和状态，最终实现双环的平稳转换。通过仿真分析，该转换策略不管是位置闭环向力闭环转换还是力闭环向位置闭环转换都可以实现平稳转换。最后在实验室两缸同步实验台上用主从同步方式验证该转换策略的可行性和有效性，该转换策略对现实的生产具有重要的指导意义。
Papanyan, Valeri; Oshle, Edward; Adamo, Daniel
2008-01-01
Measurement of the jettisoned object departure trajectory and velocity vector in the International Space Station (ISS) reference frame is vitally important for prompt evaluation of the object s imminent orbit. We report on the first successful application of photogrammetric analysis of the ISS imagery for the prompt computation of the jettisoned object s position and velocity vectors. As post-EVA analyses examples, we present the Floating Potential Probe (FPP) and the Russian "Orlan" Space Suit jettisons, as well as the near-real-time (provided in several hours after the separation) computations of the Video Stanchion Support Assembly Flight Support Assembly (VSSA-FSA) and Early Ammonia Servicer (EAS) jettisons during the US astronauts space-walk. Standard close-range photogrammetry analysis was used during this EVA to analyze two on-board camera image sequences down-linked from the ISS. In this approach the ISS camera orientations were computed from known coordinates of several reference points on the ISS hardware. Then the position of the jettisoned object for each time-frame was computed from its image in each frame of the video-clips. In another, "quick-look" approach used in near-real time, orientation of the cameras was computed from their position (from the ISS CAD model) and operational data (pan and tilt) then location of the jettisoned object was calculated only for several frames of the two synchronized movies. Keywords: Photogrammetry, International Space Station, jettisons, image analysis.
S. Rittidech
2005-01-01
Full Text Available This heat transfer characteristics of a closed-end oscillating heat-pipe (CEOHP depend on a number of parameters. They are the number of turns, inner diameter of the tube, aspect ratio and the dimensionless parameters of heat transfer. The CEOHPs used to employ a copper tube with inner diameter of 0.66, 1.09 and 2.03 mm. The lengths of the evaporator, adiabatic and condenser sections were equal and changed to 50,100 and 150 mm. R141b was used as the working fluids with filling ratio of 50% by total volume. The meandering turns of 10, 20 and 40.The evaporator section was heated by hot water and the condenser section was cooled by distilled water. The experimental inclination angles were 0, 20, 40, 60, 80 and 90 degree from the horizontal plane. The controlled temperature at the adiabatic section of 50Â°C. When the system reached the steady state, the temperature and the flow rate of the cooling substance was recorded in order to calculate the heat transfer rate of the CEOHPs. The experimental results showed that the heat flux decreases with an increasing number of turns and decreases with an increasing aspect ratio. The heat flux increases with an increasing inner diameter. A correlation to predict the heat transfer rate at vertical position can be established.
朱伟; 周晓峰; 胡隆华; 刘帅
2012-01-01
Experimental study of temperature distribution along tunnel ceiling with different longitudinal ventilation velocities and different typical fire sizes was conducted in a combustion wind tunnel with length of 20 m. Both square and rectangular pool fires were used as fire sources for longitudinal ventilation velocities ranged in 0 - 3 m/s. The smoke temperatures below the ceiling were recorded by K type thermocouple for near fire region and by thermal resistors for that relative far away from the fire source. The results indicate that longitudinal ventilation velocity and fire size have a great influence on temperature distribution. The variation of ceiling temperature distribution with the increase of longitudinal ventilation velocity was shown to be different for a small fire fromthat for a large fire. For small scale fires, temperature of tunnel ceiling reduced to a stable value with gradual increase of longitudinal ventilation velocity. However, for big scale fire, the temperature increased first, and then decreased. The position of maximum temperature rise point firstly moved downstream horizontally with the increase of the wind speed. When the wind speed reached a certain value, the maximum temperature rise point returned back to an upstream position, and then moved downstream again. This is due to the change of dominant heating mechanism with the increase of longitudinal ventilation velocity. When the longitudinal ventilation velocity is relative small, both convection from hot smoke and radiation from the flame provide considerable contribution. However , when the longitudinal ventilation velocity is relative large, radiation is dominant. The influence of the length of windward side of rectangular pool fire was also discussed. It was shown that when the longitudinal ventilation velocity is relative smaller (0.5 - 1.5 m/s), the maximum temperature is higher when the longer side is parallel to the wind direction than that under perpendicular condition. However
Maximum Autocorrelation Factorial Kriging
Nielsen, Allan Aasbjerg; Conradsen, Knut; Pedersen, John L.
2000-01-01
This paper describes maximum autocorrelation factor (MAF) analysis, maximum autocorrelation factorial kriging, and its application to irregularly sampled stream sediment geochemical data from South Greenland. Kriged MAF images are compared with kriged images of varimax rotated factors from...
Maximum Autocorrelation Factorial Kriging
Nielsen, Allan Aasbjerg; Conradsen, Knut; Pedersen, John L.; Steenfelt, Agnete
2000-01-01
This paper describes maximum autocorrelation factor (MAF) analysis, maximum autocorrelation factorial kriging, and its application to irregularly sampled stream sediment geochemical data from South Greenland. Kriged MAF images are compared with kriged images of varimax rotated factors from an ordinary non-spatial factor analysis, and they are interpreted in a geological context. It is demonstrated that MAF analysis contrary to ordinary non-spatial factor analysis gives an objective discrimina...
Sosin, M; Chritin, N; Griffet, S; Kemppinen, J; Mainaud Durand, H; Rude, V; Sterbini, G
2012-01-01
Since several years, CERN is studying the feasibility of building a high energy e+ e- linear collider: the CLIC (Compact LInear Collider). One of the challenges of such a collider is the pre-alignment precision and accuracy requirement on the transverse positions of the linac components, which is typically 14 μm over a window of 200 m. To ensure the possibility of positioning within such tight constraints, CERN Beams Department’s Survey team has worked intensively at developing the methods and technology needed to achieve that objective. This paper describes activities which were performed on a test bench (mock-up) with five degrees of freedom (DOF) for the qualification of control algorithms for the CLIC supporting system active-pre-alignment. Present understanding, lessons learned (“know how”), issues of sensors noise and mechanical components nonlinearities are presented.
The maximum entropy technique. System's statistical description
Belashev, B Z
2002-01-01
The maximum entropy technique (MENT) is applied for searching the distribution functions of physical values. MENT takes into consideration the demand of maximum entropy, the characteristics of the system and the connection conditions, naturally. It is allowed to apply MENT for statistical description of closed and open systems. The examples in which MENT had been used for the description of the equilibrium and nonequilibrium states and the states far from the thermodynamical equilibrium are considered
Maximum likely scale estimation
Loog, Marco; Pedersen, Kim Steenstrup; Markussen, Bo
2005-01-01
A maximum likelihood local scale estimation principle is presented. An actual implementation of the estimation principle uses second order moments of multiple measurements at a fixed location in the image. These measurements consist of Gaussian derivatives possibly taken at several scales and/or ...
Measuring Visual Closeness of 3-D Models
Gollaz Morales, Jose Alejandro
2012-09-01
Measuring visual closeness of 3-D models is an important issue for different problems and there is still no standardized metric or algorithm to do it. The normal of a surface plays a vital role in the shading of a 3-D object. Motivated by this, we developed two applications to measure visualcloseness, introducing normal difference as a parameter in a weighted metric in Metro’s sampling approach to obtain the maximum and mean distance between 3-D models using 3-D and 6-D correspondence search structures. A visual closeness metric should provide accurate information on what the human observers would perceive as visually close objects. We performed a validation study with a group of people to evaluate the correlation of our metrics with subjective perception. The results were positive since the metrics predicted the subjective rankings more accurately than the Hausdorff distance.
Vieira, L C; Pereira, J C; Coradazzi, J L; Francischone, C E
1990-01-01
The authors describe a clinical case of closing upper central incisives diastema, reconstructiva of a conoid upper lateral and the rechaping of an upper canine to a lateral incisive. The material used was composite resin.
Maximum information photoelectron metrology
Hockett, P; Wollenhaupt, M; Baumert, T
2015-01-01
Photoelectron interferograms, manifested in photoelectron angular distributions (PADs), are a high-information, coherent observable. In order to obtain the maximum information from angle-resolved photoionization experiments it is desirable to record the full, 3D, photoelectron momentum distribution. Here we apply tomographic reconstruction techniques to obtain such 3D distributions from multiphoton ionization of potassium atoms, and fully analyse the energy and angular content of the 3D data. The PADs obtained as a function of energy indicate good agreement with previous 2D data and detailed analysis [Hockett et. al., Phys. Rev. Lett. 112, 223001 (2014)] over the main spectral features, but also indicate unexpected symmetry-breaking in certain regions of momentum space, thus revealing additional continuum interferences which cannot otherwise be observed. These observations reflect the presence of additional ionization pathways and, most generally, illustrate the power of maximum information measurements of th...
Maximum Likelihood Associative Memories
Gripon, Vincent; Rabbat, Michael
2013-01-01
Associative memories are structures that store data in such a way that it can later be retrieved given only a part of its content -- a sort-of error/erasure-resilience property. They are used in applications ranging from caches and memory management in CPUs to database engines. In this work we study associative memories built on the maximum likelihood principle. We derive minimum residual error rates when the data stored comes from a uniform binary source. Second, we determine the minimum amo...
Maximum likely scale estimation
Loog, Marco; Pedersen, Kim Steenstrup; Markussen, Bo
2005-01-01
A maximum likelihood local scale estimation principle is presented. An actual implementation of the estimation principle uses second order moments of multiple measurements at a fixed location in the image. These measurements consist of Gaussian derivatives possibly taken at several scales and....../or having different derivative orders. Although the principle is applicable to a wide variety of image models, the main focus here is on the Brownian model and its use for scale selection in natural images. Furthermore, in the examples provided, the simplifying assumption is made that the behavior...... of the measurements is completely characterized by all moments up to second order....
Metallic positive expulsion diaphragms
Gleich, D.
1972-01-01
High-cycle life ring-reinforced hemispherical type positive expulsion diaphragm performance was demonstrated by room temperature fluid expulsion tests of 13" diameter, 8 mil thick stainless steel configurations. A maximum of eleven (11) leak-free, fluid expulsions were achieved by a 25 deg cone angle diaphragm hoop-reinforced with .110-inch cross-sectional diameter wires. This represents a 70% improvement in diaphragm reversal cycle life compared to results previously obtained. The reversal tests confirmed analytic predictions for diaphragm cycle life increases due to increasing values of diaphragm cone angle, radius to thickness ratio and material strain to necking capacity. Practical fabrication techniques were demonstrated for forming close-tolerance, thin corrugated shells and for obtaining closely controlled reinforcing ring stiffness required to maximize diaphragm cycle life. A non-destructive inspection technique for monitoring large local shell bending strains was developed.
翁丽霞; 王勇
2014-01-01
Objective To screen the close contacts of smear-positive tuberculosis patients and investigate the effect of preventive medicine in closely contacted students in school.Methods Close contacts and general contacts in 6 schools with smear-positive pulmonary tuberculosis epidemic from 2008 to 2012 in Shengzhou city were tested by PPD.Students with strong PPD-positive but negative chest X-ray images were recommended to take anti-tuberculosis drugs,and the effect was evaluated.Results A total of 34 cases of pulmonary tuberculosis were diagnosed in the epidemic in 6 schools and 710 close contacts and 190 general contacts were identified.There were 179 strong PPD-positive students in 710 close contacts of tuberculosis patients.Among the strong PPD-positive students,86 took preventive medication and no patients were found one year later.Among 93 strong PPD-positive students who did not take preventive medicine,23 students (24.73％) developed tuberculosis one year later.Conclusions The status of tuberculosis infection in close contact population can be evaluated by PPD screening.PPD screening is useful to guide the preventive medication and thus effectively control the spread of tubuculosis.%目的 对学校涂阳肺结核疫情发生后密切接触者进行筛查,并观察预防性服药的效果.方法 选取2008-2012年嵊州市6起学校涂阳肺结核,疫情发生后密切接触者和一般接触者进行结核菌素试验(PPD试验),PPD强阳性胸片未见异常者建议给予抗结核预防性服药,并随访观察预防性服药的效果.结果 6起学校肺结核疫情共确诊肺结核34例,密切接触者710人,一般接触者190人.密切接触者中179名PPD筛查呈强阳性,其中86名开展预防性服药,随访1年无人发病;93名未服药的学生随访1年后,23人(24.73％)发病.预防性服药过程中,4人出现轻度的胃肠道反应,3人出现肝功能异常,停药好转后继续治疗,无严重不良反应发生.结论 通过PPD试验筛查,
F. TopsÃƒÂ¸e
2001-09-01
Full Text Available Abstract: In its modern formulation, the Maximum Entropy Principle was promoted by E.T. Jaynes, starting in the mid-fifties. The principle dictates that one should look for a distribution, consistent with available information, which maximizes the entropy. However, this principle focuses only on distributions and it appears advantageous to bring information theoretical thinking more prominently into play by also focusing on the "observer" and on coding. This view was brought forward by the second named author in the late seventies and is the view we will follow-up on here. It leads to the consideration of a certain game, the Code Length Game and, via standard game theoretical thinking, to a principle of Game Theoretical Equilibrium. This principle is more basic than the Maximum Entropy Principle in the sense that the search for one type of optimal strategies in the Code Length Game translates directly into the search for distributions with maximum entropy. In the present paper we offer a self-contained and comprehensive treatment of fundamentals of both principles mentioned, based on a study of the Code Length Game. Though new concepts and results are presented, the reading should be instructional and accessible to a rather wide audience, at least if certain mathematical details are left aside at a rst reading. The most frequently studied instance of entropy maximization pertains to the Mean Energy Model which involves a moment constraint related to a given function, here taken to represent "energy". This type of application is very well known from the literature with hundreds of applications pertaining to several different elds and will also here serve as important illustration of the theory. But our approach reaches further, especially regarding the study of continuity properties of the entropy function, and this leads to new results which allow a discussion of models with so-called entropy loss. These results have tempted us to speculate over
李艳杰; 崔天宇; 王海; 马鹤; 苗鑫超
2013-01-01
A software implementation method of hydraulic cylinder position PID closed loop control in proportional valve control system using Siemens S7-200 was proposed.The block diagram and ladder program was given,and experimental studies in Festo TP701 proportional hydraulic test bed was done.Experimental studies have shown that the proportion of open-loop control system,using software methods can achieve the closed-loop control of position and other physical quantities,to control the performance of precision and anti-jamming capability to meet the demand of general industrial applications.%提出一种利用西门子S7-200实现比例阀控制系统中液压缸位置PID闭环控制的软件实现方法,给出了程序框图及梯形图程序,并在Festo TP701比例液压试验台上进行实验研究.实验研究表明,开环比例控制系统中,利用软件的方法可实现位置等物理量的闭环控制,控制精度和抗干扰能力等性能可满足一般工业应用的需求.
Regularized maximum correntropy machine
Wang, Jim Jing-Yan
2015-02-12
In this paper we investigate the usage of regularized correntropy framework for learning of classifiers from noisy labels. The class label predictors learned by minimizing transitional loss functions are sensitive to the noisy and outlying labels of training samples, because the transitional loss functions are equally applied to all the samples. To solve this problem, we propose to learn the class label predictors by maximizing the correntropy between the predicted labels and the true labels of the training samples, under the regularized Maximum Correntropy Criteria (MCC) framework. Moreover, we regularize the predictor parameter to control the complexity of the predictor. The learning problem is formulated by an objective function considering the parameter regularization and MCC simultaneously. By optimizing the objective function alternately, we develop a novel predictor learning algorithm. The experiments on two challenging pattern classification tasks show that it significantly outperforms the machines with transitional loss functions.
Maximum Throughput in Multiple-Antenna Systems
Zamani, Mahdi
2012-01-01
The point-to-point multiple-antenna channel is investigated in uncorrelated block fading environment with Rayleigh distribution. The maximum throughput and maximum expected-rate of this channel are derived under the assumption that the transmitter is oblivious to the channel state information (CSI), however, the receiver has perfect CSI. First, we prove that in multiple-input single-output (MISO) channels, the optimum transmission strategy maximizing the throughput is to use all available antennas and perform equal power allocation with uncorrelated signals. Furthermore, to increase the expected-rate, multi-layer coding is applied. Analogously, we establish that sending uncorrelated signals and performing equal power allocation across all available antennas at each layer is optimum. A closed form expression for the maximum continuous-layer expected-rate of MISO channels is also obtained. Moreover, we investigate multiple-input multiple-output (MIMO) channels, and formulate the maximum throughput in the asympt...
李太平
2012-01-01
Under the information asymmetry and market supervision lack of agri-food quality,the excessively rigorous standard of maximum residue limits（MRLs）for pesticide in agrifood is not only unbeneficial to protect consumer health and ecological environment,but also aggregate serious pesticide residues in agrifood.Taking national standard Maximum Residue Limits for Pesticides in Food（GB2763-2005）as a case,calculated the Theory Daily Intake（TDI）related agrifoods of 439 residue indexes of 126 pesticides with the quantity relation between MRLs,acceptable daily intake（ADI）and TDI,and compared with the customer＇s Real Daily Intake（RDI）related agrifoods.It was found that there were 111 residue indexes related agri-foods which TDI were overly above and beyond their RDI of Chinese residents,accounted for 23.22% of 478 pesticide residue indexes in this national standards.This evidence proved that the national standard had the excessively rigorous tendency really and suggested our government would revise this standard at once in order to eliminate the food safety management trap.%在农产品质量信息不对称、市场监管不到位的情况下,农药最大残留限量标准制定过严,不但不能保护消费者健康和农业生态环境,反而会加剧农产品的农药残留问题泛滥。利用农药最大残留限量（MRLs）、日允许摄入量（ADI）与被测食品每日最大理论摄入量（TDI）三者之间的数量关系,以《食品中农药最大残留限量》GB2763-2005为例,计算了126种农药439个残留指标的TDI值,发现有111个残留指标的TDI值远远大于我国居民每日实际摄入量（RDI）,占GB2763-2005国家标准478个残留限量指标的23.22%,表明我国农药最大残留限量国家标准部分指标值设定存在过严的倾向,建议政府尽快修订该标准,以消除食品安全管理隐患。
Equalized near maximum likelihood detector
2012-01-01
This paper presents new detector that is used to mitigate intersymbol interference introduced by bandlimited channels. This detector is named equalized near maximum likelihood detector which combines nonlinear equalizer and near maximum likelihood detector. Simulation results show that the performance of equalized near maximum likelihood detector is better than the performance of nonlinear equalizer but worse than near maximum likelihood detector.
Cheeseman, Peter; Stutz, John
2005-01-01
A long standing mystery in using Maximum Entropy (MaxEnt) is how to deal with constraints whose values are uncertain. This situation arises when constraint values are estimated from data, because of finite sample sizes. One approach to this problem, advocated by E.T. Jaynes [1], is to ignore this uncertainty, and treat the empirically observed values as exact. We refer to this as the classic MaxEnt approach. Classic MaxEnt gives point probabilities (subject to the given constraints), rather than probability densities. We develop an alternative approach that assumes that the uncertain constraint values are represented by a probability density {e.g: a Gaussian), and this uncertainty yields a MaxEnt posterior probability density. That is, the classic MaxEnt point probabilities are regarded as a multidimensional function of the given constraint values, and uncertainty on these values is transmitted through the MaxEnt function to give uncertainty over the MaXEnt probabilities. We illustrate this approach by explicitly calculating the generalized MaxEnt density for a simple but common case, then show how this can be extended numerically to the general case. This paper expands the generalized MaxEnt concept introduced in a previous paper [3].
An investigation of rugby scrimmaging posture and individual maximum pushing force.
Wu, Wen-Lan; Chang, Jyh-Jong; Wu, Jia-Hroung; Guo, Lan-Yuen
2007-02-01
Although rugby is a popular contact sport and the isokinetic muscle torque assessment has recently found widespread application in the field of sports medicine, little research has examined the factors associated with the performance of game-specific skills directly by using the isokinetic-type rugby scrimmaging machine. This study is designed to (a) measure and observe the differences in the maximum individual pushing forward force produced by scrimmaging in different body postures (3 body heights x 2 foot positions) with a self-developed rugby scrimmaging machine and (b) observe the variations in hip, knee, and ankle angles at different body postures and explore the relationship between these angle values and the individual maximum pushing force. Ten national rugby players were invited to participate in the examination. The experimental equipment included a self-developed rugby scrimmaging machine and a 3-dimensional motion analysis system. Our results showed that the foot positions (parallel and nonparallel foot positions) do not affect the maximum pushing force; however, the maximum pushing force was significantly lower in posture I (36% body height) than in posture II (38%) and posture III (40%). The maximum forward force in posture III (40% body height) was also slightly greater than for the scrum in posture II (38% body height). In addition, it was determined that hip, knee, and ankle angles under parallel feet positioning are factors that are closely negatively related in terms of affecting maximum pushing force in scrimmaging. In cross-feet postures, there was a positive correlation between individual forward force and hip angle of the rear leg. From our results, we can conclude that if the player stands in an appropriate starting position at the early stage of scrimmaging, it will benefit the forward force production.
索涛; 冯廷勇; 罗俊龙; 罗禹; 李红
2012-01-01
结果的接近性是指对已发生事件的实际结果与在心理上的理想结果或期待结果之间差距的接近程度.实验采用事件相关电位技术和类老虎机赌博任务探讨了结果的接近性对正性结果评价的影响.(1)行为评定结果表明,结果的接近性不同水平诱发了不同的情绪体验,“差一点输”的赢钱使被试更多感到庆幸,“最理想”的赢钱使被试感到高兴；结果的接近性也影响了随后trial的反应时,与“一般”的赢钱和“最理想”的赢.钱相比,“差一点输的”赢钱后的下一个trial中被试的反应时明显变长.(2)脑电结果表明,结果的接近性不同水平诱发了不同的FRN和P300,与“一般”的赢钱和“最理想”的赢钱相比,“差一点输”的赢钱诱发了波幅更大的FRN和波幅更大潜伏期更长的P300.这说明结果的接近性明显地影响了正性结果的认知评价加工.%Closeness of outcome refers to the degree of distance between real behavioral outcomes and desired outcomes. Previous studies revealed that closeness of outcome was one of the main factors that induce counterfactual thinking about the outcome, and played an important role in inducing post-decisional emotions (e.g., regret, rejoicing). Although some recent researches have explored how closeness of outcome affects negative outcome evaluation (e,g., losing money) in gambles, there is no evidence that whether it modulates positive outcome evaluation (e,g,, gaining money). By simultaneously recording event-related potentials (ERPs) data from participants engaged in a simple like-slot-machine gambling task, the present study aimed to further investigate that whether and how closeness of outcome modulated feedback outcome evaluation when gaining money. Fourteen healthy undergraduates (7 males and 7 females, age 19-24, Af-21.6 years) were recruited to take part to this study. The participants in the experiment were all right-hand, had normal
The Sherpa Maximum Likelihood Estimator
Nguyen, D.; Doe, S.; Evans, I.; Hain, R.; Primini, F.
2011-07-01
A primary goal for the second release of the Chandra Source Catalog (CSC) is to include X-ray sources with as few as 5 photon counts detected in stacked observations of the same field, while maintaining acceptable detection efficiency and false source rates. Aggressive source detection methods will result in detection of many false positive source candidates. Candidate detections will then be sent to a new tool, the Maximum Likelihood Estimator (MLE), to evaluate the likelihood that a detection is a real source. MLE uses the Sherpa modeling and fitting engine to fit a model of a background and source to multiple overlapping candidate source regions. A background model is calculated by simultaneously fitting the observed photon flux in multiple background regions. This model is used to determine the quality of the fit statistic for a background-only hypothesis in the potential source region. The statistic for a background-plus-source hypothesis is calculated by adding a Gaussian source model convolved with the appropriate Chandra point spread function (PSF) and simultaneously fitting the observed photon flux in each observation in the stack. Since a candidate source may be located anywhere in the field of view of each stacked observation, a different PSF must be used for each observation because of the strong spatial dependence of the Chandra PSF. The likelihood of a valid source being detected is a function of the two statistics (for background alone, and for background-plus-source). The MLE tool is an extensible Python module with potential for use by the general Chandra user.
The maximum rotation of a galactic disc
Bottema, R
1997-01-01
The observed stellar velocity dispersions of galactic discs show that the maximum rotation of a disc is on average 63% of the observed maximum rotation. This criterion can, however, not be applied to small or low surface brightness (LSB) galaxies because such systems show, in general, a continuously rising rotation curve until the outermost measured radial position. That is why a general relation has been derived, giving the maximum rotation for a disc depending on the luminosity, surface brightness, and colour of the disc. As a physical basis of this relation serves an adopted fixed mass-to-light ratio as a function of colour. That functionality is consistent with results from population synthesis models and its absolute value is determined from the observed stellar velocity dispersions. The derived maximum disc rotation is compared with a number of observed maximum rotations, clearly demonstrating the need for appreciable amounts of dark matter in the disc region and even more so for LSB galaxies. Matters h...
Temporomandibular Joint, Closed
... Gallery > Oral Health > The Temporomandibular Joint, Closed The Temporomandibular Joint, Closed Main Content Title: The Temporomandibular Joint, Closed Description: The temporomandibular joint connects the lower ...
Mørck, Line Lerche; Khawaja, Iram
2009-01-01
abstract This article focuses on the complex and multi-layered process of researcher positioning, specifically in relation to the politically sensitive study of marginalised and ‘othered' groups such as Muslims living in Denmark. We discuss the impact of different ethnic, religious and racial...... political and personal involvement by the researcher, which challenges traditional perspectives on research and researcher positioning. A key point in this regard is the importance of constant awareness of and reflection on the multiple ways in which one's positioning as a researcher influences the research...... process. Studying the other calls for close reflections on one's own position, theoretically, personally, and politically, taking into account one's complicity in either overcoming or reproducing processes of othering and marginalisation. [i] We use the term (ethnic) minoritised, not as a distinction...
OECD Maximum Residue Limit Calculator
With the goal of harmonizing the calculation of maximum residue limits (MRLs) across the Organisation for Economic Cooperation and Development, the OECD has developed an MRL Calculator. View the calculator.
Maximum efficiency of low-dissipation heat engines at arbitrary power
Holubec, Viktor; Ryabov, Artem
2016-07-01
We investigate maximum efficiency at a given power for low-dissipation heat engines. Close to maximum power, the maximum gain in efficiency scales as a square root of relative loss in power and this scaling is universal for a broad class of systems. For low-dissipation engines, we calculate the maximum gain in efficiency for an arbitrary fixed power. We show that engines working close to maximum power can operate at considerably larger efficiency compared to the efficiency at maximum power. Furthermore, we introduce universal bounds on maximum efficiency at a given power for low-dissipation heat engines. These bounds represent direct generalization of the bounds on efficiency at maximum power obtained by Esposito et al (2010 Phys. Rev. Lett. 105 150603). We derive the bounds analytically in the regime close to maximum power and for small power values. For the intermediate regime we present strong numerical evidence for the validity of the bounds.
Minimal Length, Friedmann Equations and Maximum Density
Awad, Adel
2014-01-01
Inspired by Jacobson's thermodynamic approach[gr-qc/9504004], Cai et al [hep-th/0501055,hep-th/0609128] have shown the emergence of Friedmann equations from the first law of thermodynamics. We extend Akbar--Cai derivation [hep-th/0609128] of Friedmann equations to accommodate a general entropy-area law. Studying the resulted Friedmann equations using a specific entropy-area law, which is motivated by the generalized uncertainty principle (GUP), reveals the existence of a maximum energy density closed to Planck density. Allowing for a general continuous pressure $p(\\rho,a)$ leads to bounded curvature invariants and a general nonsingular evolution. In this case, the maximum energy density is reached in a finite time and there is no cosmological evolution beyond this point which leaves the big bang singularity inaccessible from a spacetime prospective. The existence of maximum energy density and a general nonsingular evolution is independent of the equation of state and the spacial curvature $k$. As an example w...
Maximum-biomass prediction of homofermentative Lactobacillus.
Cui, Shumao; Zhao, Jianxin; Liu, Xiaoming; Chen, Yong Q; Zhang, Hao; Chen, Wei
2016-07-01
Fed-batch and pH-controlled cultures have been widely used for industrial production of probiotics. The aim of this study was to systematically investigate the relationship between the maximum biomass of different homofermentative Lactobacillus and lactate accumulation, and to develop a prediction equation for the maximum biomass concentration in such cultures. The accumulation of the end products and the depletion of nutrients by various strains were evaluated. In addition, the minimum inhibitory concentrations (MICs) of acid anions for various strains at pH 7.0 were examined. The lactate concentration at the point of complete inhibition was not significantly different from the MIC of lactate for all of the strains, although the inhibition mechanism of lactate and acetate on Lactobacillus rhamnosus was different from the other strains which were inhibited by the osmotic pressure caused by acid anions at pH 7.0. When the lactate concentration accumulated to the MIC, the strains stopped growing. The maximum biomass was closely related to the biomass yield per unit of lactate produced (YX/P) and the MIC (C) of lactate for different homofermentative Lactobacillus. Based on the experimental data obtained using different homofermentative Lactobacillus, a prediction equation was established as follows: Xmax - X0 = (0.59 ± 0.02)·YX/P·C.
Maximum margin Bayesian network classifiers.
Pernkopf, Franz; Wohlmayr, Michael; Tschiatschek, Sebastian
2012-03-01
We present a maximum margin parameter learning algorithm for Bayesian network classifiers using a conjugate gradient (CG) method for optimization. In contrast to previous approaches, we maintain the normalization constraints on the parameters of the Bayesian network during optimization, i.e., the probabilistic interpretation of the model is not lost. This enables us to handle missing features in discriminatively optimized Bayesian networks. In experiments, we compare the classification performance of maximum margin parameter learning to conditional likelihood and maximum likelihood learning approaches. Discriminative parameter learning significantly outperforms generative maximum likelihood estimation for naive Bayes and tree augmented naive Bayes structures on all considered data sets. Furthermore, maximizing the margin dominates the conditional likelihood approach in terms of classification performance in most cases. We provide results for a recently proposed maximum margin optimization approach based on convex relaxation. While the classification results are highly similar, our CG-based optimization is computationally up to orders of magnitude faster. Margin-optimized Bayesian network classifiers achieve classification performance comparable to support vector machines (SVMs) using fewer parameters. Moreover, we show that unanticipated missing feature values during classification can be easily processed by discriminatively optimized Bayesian network classifiers, a case where discriminative classifiers usually require mechanisms to complete unknown feature values in the data first.
Maximum Entropy in Drug Discovery
Chih-Yuan Tseng
2014-07-01
Full Text Available Drug discovery applies multidisciplinary approaches either experimentally, computationally or both ways to identify lead compounds to treat various diseases. While conventional approaches have yielded many US Food and Drug Administration (FDA-approved drugs, researchers continue investigating and designing better approaches to increase the success rate in the discovery process. In this article, we provide an overview of the current strategies and point out where and how the method of maximum entropy has been introduced in this area. The maximum entropy principle has its root in thermodynamics, yet since Jaynes’ pioneering work in the 1950s, the maximum entropy principle has not only been used as a physics law, but also as a reasoning tool that allows us to process information in hand with the least bias. Its applicability in various disciplines has been abundantly demonstrated. We give several examples of applications of maximum entropy in different stages of drug discovery. Finally, we discuss a promising new direction in drug discovery that is likely to hinge on the ways of utilizing maximum entropy.
Maximum-Likelihood Semiblind Equalization of Doubly Selective Channels Using the EM Algorithm
Gideon Kutz
2010-01-01
Full Text Available Maximum-likelihood semi-blind joint channel estimation and equalization for doubly selective channels and single-carrier systems is proposed. We model the doubly selective channel as an FIR filter where each filter tap is modeled as a linear combination of basis functions. This channel description is then integrated in an iterative scheme based on the expectation-maximization (EM principle that converges to the channel description vector estimation. We discuss the selection of the basis functions and compare various functions sets. To alleviate the problem of convergence to a local maximum, we propose an initialization scheme to the EM iterations based on a small number of pilot symbols. We further derive a pilot positioning scheme targeted to reduce the probability of convergence to a local maximum. Our pilot positioning analysis reveals that for high Doppler rates it is better to spread the pilots evenly throughout the data block (and not to group them even for frequency-selective channels. The resulting equalization algorithm is shown to be superior over previously proposed equalization schemes and to perform in many cases close to the maximum-likelihood equalizer with perfect channel knowledge. Our proposed method is also suitable for coded systems and as a building block for Turbo equalization algorithms.
Ko, Jae Hee; Choi, Soon Chul; You, Dong Soo [Dept. of Oral and Maxillofacial Radiology, Graduate School, Seoul National University, Seoul (Korea, Republic of)
1995-08-15
This study was designed to evaluate the interrelationship between the congealer head position in transcranial view and the articular disc position in the arthrography. The condylar positions were assessed by subjective method and linear measurement method on the transcranial view. The subjects for this study consisted of 24 symptomatic joints with normal disc position, 37 joints with anterior disc displacement with reduction and 44 joints with anterior disc displacement without reduction that were classified by arthrotomography under the fluoroscopic guidance. The interrelationship between the condylar head position in transcranial view and the articualr disc position in the arthrography was evaluated by Chi square test. The following results were obtained: 1. There was no significant interrelationship between the position of congealer head in closed mouth state on transcranial view and articular disc position in the arthrography (p>0.05). 2. There was no significant interrelationship between the changes of interarticular distance in 1 inch opening state and articular disc position in the arthrography (p>0.05). 3. There was no significant interrelationship between the position of condylar head related to the apex of articular eminence in 1 inch opening state and articular disc position in the arthrography (p>0.05). 4. There was significant interrelationship between the changes of interarticular distance that is assessed by linear measurement method in maximum opening state and articular disc position in the arthrography (p<0.05), but there was no significant interrelationship when the condylar head position was assessed by subjective method (p>0.05). 5. There was significant interrelationship between the degree of condylar translation in maximum opening state and articular disc position in the arthrography (p<0.01). 6. The correlation coefficient between two methods to assess the position of condylar head were 0.7989: the condylar head position in articular fossa
Greenslade, Thomas B., Jr.
1985-01-01
Discusses a series of experiments performed by Thomas Hope in 1805 which show the temperature at which water has its maximum density. Early data cast into a modern form as well as guidelines and recent data collected from the author provide background for duplicating Hope's experiments in the classroom. (JN)
Abolishing the maximum tension principle
Dabrowski, Mariusz P
2015-01-01
We find the series of example theories for which the relativistic limit of maximum tension $F_{max} = c^2/4G$ represented by the entropic force can be abolished. Among them the varying constants theories, some generalized entropy models applied both for cosmological and black hole horizons as well as some generalized uncertainty principle models.
Abolishing the maximum tension principle
Mariusz P. Da̧browski
2015-09-01
Full Text Available We find the series of example theories for which the relativistic limit of maximum tension Fmax=c4/4G represented by the entropic force can be abolished. Among them the varying constants theories, some generalized entropy models applied both for cosmological and black hole horizons as well as some generalized uncertainty principle models.
Luciane M. Steffen
2004-08-01
clinical classification of the VFP as median, paramedian, intermedian, abduction or cadaveric is controversial. AIM: To check association and correlation between Maximum Phonation Time (MPT with position and with the displacement angle of the paralyzed vocal fold (PVF, to measure the distal angle of the PVF in different positions from median line, correlating it with the clinical classification. STUDY DESIGN: Chart review. MATERIAL AND METHOD: Records of 86 PVF individuals were reviewed, videoendoscopic exams were analyzed and a computer program measured the distal angle of the PVF. RESULTS: The MPTs for each position of paralyzed vocal fold have statistical significance only for /z/ in the median position. There is a relationship between the MPT of /i/, /u/ with PVF distal angle. Correlation and association of the displacement angle with clinical position demonstrate statistical significance when the PVF is in abduction. CONCLUSION: By the present study it was impossible to classify positions of the paralyzed vocal fold using either MPT or the displacement angle measurement.
Maximum frequency of the decametric radiation from Jupiter
Barrow, C. H.; Alexander, J. K.
1980-01-01
The upper frequency limits of Jupiter's decametric radio emission are found to be essentially the same when observed from the earth or, with considerably higher sensitivity, from the Voyager spacecraft close to Jupiter. This suggests that the maximum frequency is a real cut-off corresponding to a maximum gyrofrequency of about 38-40 MHz at Jupiter. It no longer appears to be necessary to specify different cut-off frequencies for the Io and non-Io emission as the maximum frequencies are roughly the same in each case.
Experimental study on prediction model for maximum rebound ratio
LEI Wei-dong; TENG Jun; A.HEFNY; ZHAO Jian; GUAN Jiong
2007-01-01
The proposed prediction model for estimating the maximum rebound ratio was applied to a field explosion test, Mandai test in Singapore.The estimated possible maximum Deak particle velocities(PPVs)were compared with the field records.Three of the four available field-recorded PPVs lie exactly below the estimated possible maximum values as expected.while the fourth available field-recorded PPV lies close to and a bit higher than the estimated maximum possible PPV The comparison results show that the predicted PPVs from the proposed prediction model for the maximum rebound ratio match the field.recorded PPVs better than those from two empirical formulae.The very good agreement between the estimated and field-recorded values validates the proposed prediction model for estimating PPV in a rock mass with a set of ipints due to application of a two dimensional compressional wave at the boundary of a tunnel or a borehole.
Maximum speeds and alpha angles of flowing avalanches
McClung, David; Gauer, Peter
2016-04-01
um/√H0--; um/√S0- are greater than 2.0 and 1.3 respectively. In addition, to: um/√H0--; um/√S0--, we collected 105 companion values of the αangle for runout positions defined by tanα = H0/X0where X0is horizontal reach calculated from start position to stop position of the tip of the avalanches. The αangle is a very simple measure of runout introduced by Scheidegger (1973) for rock avalanches. McClung and Mears (1991) collected αangles from more than 500 paths with maximum runout estimated for return periods on the order of 100 years and the range of values was: 18o - 42owhich is close to that here: (20o - 45o). The results showed that runout increases(α decreases) with maximum speed but there is considerable scatter in the relationship. The Spearman rank correlation is -0.54 (p < 0.005).Rank correlations of α vs. um/√S0-;um/√H0- are - 0.44;.- 0.56 (both with p < 0.005
Maximum Genus of Strong Embeddings
Er-ling Wei; Yan-pei Liu; Han Ren
2003-01-01
The strong embedding conjecture states that any 2-connected graph has a strong embedding on some surface. It implies the circuit double cover conjecture: Any 2-connected graph has a circuit double cover.Conversely, it is not true. But for a 3-regular graph, the two conjectures are equivalent. In this paper, a characterization of graphs having a strong embedding with exactly 3 faces, which is the strong embedding of maximum genus, is given. In addition, some graphs with the property are provided. More generally, an upper bound of the maximum genus of strong embeddings of a graph is presented too. Lastly, it is shown that the interpolation theorem is true to planar Halin graph.
Remizov, Ivan D
2009-01-01
In this note, we represent a subdifferential of a maximum functional defined on the space of all real-valued continuous functions on a given metric compact set. For a given argument, $f$ it coincides with the set of all probability measures on the set of points maximizing $f$ on the initial compact set. This complete characterization lies in the heart of several important identities in microeconomics, such as Roy's identity, Sheppard's lemma, as well as duality theory in production and linear programming.
Palacios, David; Gómez-Ortiz, Antonio; Andrés, Nuria; Vázquez-Selem, Lorenzo; Salvador-Franch, Ferran; Oliva, Marc
2015-02-01
This paper examines glacial evolution in the La Pera and Malniu cirques, and Arànser, La Llosa and Duran valleys, in the Cerdanya massifs on the south-facing slopes of the eastern Pyrenees. A geomorphologic analysis and dating of moraine boulders, glacially polished bedrock and rock glacier blocks were carried out by means of cosmogenic 36Cl surface exposure dating. The maximum ice advance was contemporary with the Last Glacial Maximum at 23 ka ago, and it was of greater or only slightly lesser magnitude than for previous Quaternary advances. The termini of glaciers remained close to maximum positions, with minor advances and retreats until 18-17 ka when the glacial tongues disappeared from the valleys. Depending on the previous topography, these glaciers left behind a single polygenic moraine, in the case of confined valleys, or multiple moraines next to each other in the case of flat, more open areas. A final glacial advance is detected during the Oldest Dryas close to the cirque headwalls, and the glaciers finally disappeared during the Bølling interstadial. The glaciers were then replaced by rock glaciers, whose front immediately became inactive, although their activity continued near their source area until the early Holocene.
The Testability of Maximum Magnitude
Clements, R.; Schorlemmer, D.; Gonzalez, A.; Zoeller, G.; Schneider, M.
2012-12-01
Recent disasters caused by earthquakes of unexpectedly large magnitude (such as Tohoku) illustrate the need for reliable assessments of the seismic hazard. Estimates of the maximum possible magnitude M at a given fault or in a particular zone are essential parameters in probabilistic seismic hazard assessment (PSHA), but their accuracy remains untested. In this study, we discuss the testability of long-term and short-term M estimates and the limitations that arise from testing such rare events. Of considerable importance is whether or not those limitations imply a lack of testability of a useful maximum magnitude estimate, and whether this should have any influence on current PSHA methodology. We use a simple extreme value theory approach to derive a probability distribution for the expected maximum magnitude in a future time interval, and we perform a sensitivity analysis on this distribution to determine if there is a reasonable avenue available for testing M estimates as they are commonly reported today: devoid of an appropriate probability distribution of their own and estimated only for infinite time (or relatively large untestable periods). Our results imply that any attempt at testing such estimates is futile, and that the distribution is highly sensitive to M estimates only under certain optimal conditions that are rarely observed in practice. In the future we suggest that PSHA modelers be brutally honest about the uncertainty of M estimates, or must find a way to decrease its influence on the estimated hazard.
Alternative Multiview Maximum Entropy Discrimination.
Chao, Guoqing; Sun, Shiliang
2016-07-01
Maximum entropy discrimination (MED) is a general framework for discriminative estimation based on maximum entropy and maximum margin principles, and can produce hard-margin support vector machines under some assumptions. Recently, the multiview version of MED multiview MED (MVMED) was proposed. In this paper, we try to explore a more natural MVMED framework by assuming two separate distributions p1( Θ1) over the first-view classifier parameter Θ1 and p2( Θ2) over the second-view classifier parameter Θ2 . We name the new MVMED framework as alternative MVMED (AMVMED), which enforces the posteriors of two view margins to be equal. The proposed AMVMED is more flexible than the existing MVMED, because compared with MVMED, which optimizes one relative entropy, AMVMED assigns one relative entropy term to each of the two views, thus incorporating a tradeoff between the two views. We give the detailed solving procedure, which can be divided into two steps. The first step is solving our optimization problem without considering the equal margin posteriors from two views, and then, in the second step, we consider the equal posteriors. Experimental results on multiple real-world data sets verify the effectiveness of the AMVMED, and comparisons with MVMED are also reported.
Maximum Information and Quantum Prediction Algorithms
McElwaine, J N
1997-01-01
This paper describes an algorithm for selecting a consistent set within the consistent histories approach to quantum mechanics and investigates its properties. The algorithm uses a maximum information principle to select from among the consistent sets formed by projections defined by the Schmidt decomposition. The algorithm unconditionally predicts the possible events in closed quantum systems and ascribes probabilities to these events. A simple spin model is described and a complete classification of all exactly consistent sets of histories formed from Schmidt projections in the model is proved. This result is used to show that for this example the algorithm selects a physically realistic set. Other tentative suggestions in the literature for set selection algorithms using ideas from information theory are discussed.
Quantum gravity momentum representation and maximum energy
Moffat, J. W.
2016-11-01
We use the idea of the symmetry between the spacetime coordinates xμ and the energy-momentum pμ in quantum theory to construct a momentum space quantum gravity geometry with a metric sμν and a curvature tensor Pλ μνρ. For a closed maximally symmetric momentum space with a constant 3-curvature, the volume of the p-space admits a cutoff with an invariant maximum momentum a. A Wheeler-DeWitt-type wave equation is obtained in the momentum space representation. The vacuum energy density and the self-energy of a charged particle are shown to be finite, and modifications of the electromagnetic radiation density and the entropy density of a system of particles occur for high frequencies.
Do closed universes recollapse?
Tipler, Frank J.
The conditions for recollapse in universes with compact maximal hypersurfaces are investigated theoretically, reviewing the results of recent investigations. The importance of recollapse for observational astrophysics is briefly discussed, and particular attention is given to the implications of maximal hypersurfaces and to recollapse in S3 Friedmann universes. It is conjectured that all globally hyperbolic C2 maximally extended spatially homogeneous closed universes with S3 or S2 x S1 topology and with stress-energy tensors obeying the strong-energy, positive-pressure, dominant-energy, and matter-regularity conditions do expand from an all-encompassing initial singularity to a maximal hypersurface and then recollapse to an all-encompassing final singularity.
Jealousy and Relationship Closeness
Mark Attridge
2013-02-01
Full Text Available This study confirmed a hypothesis from the Emotion-in-Relationships conceptual model, which predicts that greater interdependence between relationship partners—or closeness—creates the potential for jealousy. The study also sought to better define the positive side of romantic jealousy in addition to its more negative attributes. College students in premarital relationships (N = 229 completed a questionnaire, including 27 different measures and the Multidimensional Jealousy Scale. Select data were obtained from 122 cases at 3-month follow-up. Each jealousy scale was tested for associations with demographic (age, sex, and race, person (life satisfaction, loneliness, romantic attachment styles, love styles, and romantic beliefs, and relationship (affective, closeness, and social exchange theory constructs. Results clearly distinguished emotional/reactive jealousy as mostly “good” and cognitive/suspicious jealousy as “bad.” Behavioral jealousy was associated with few measures. Implications are discussed for the interdependence model of relationships and the transactional model of jealousy.
Cacti with maximum Kirchhoff index
Wang, Wen-Rui; Pan, Xiang-Feng
2015-01-01
The concept of resistance distance was first proposed by Klein and Randi\\'c. The Kirchhoff index $Kf(G)$ of a graph $G$ is the sum of resistance distance between all pairs of vertices in $G$. A connected graph $G$ is called a cactus if each block of $G$ is either an edge or a cycle. Let $Cat(n;t)$ be the set of connected cacti possessing $n$ vertices and $t$ cycles, where $0\\leq t \\leq \\lfloor\\frac{n-1}{2}\\rfloor$. In this paper, the maximum kirchhoff index of cacti are characterized, as well...
Generic maximum likely scale selection
Pedersen, Kim Steenstrup; Loog, Marco; Markussen, Bo
2007-01-01
The fundamental problem of local scale selection is addressed by means of a novel principle, which is based on maximum likelihood estimation. The principle is generally applicable to a broad variety of image models and descriptors, and provides a generic scale estimation methodology. The focus...... on second order moments of multiple measurements outputs at a fixed location. These measurements, which reflect local image structure, consist in the cases considered here of Gaussian derivatives taken at several scales and/or having different derivative orders....
Kohler, Susanna
2016-09-01
Weve recently discovered narrow sets of rings around two minor planets orbiting in our solar system. How did these rings form? A new study shows that they could be a result of close encounters between the minor planets and giants like Jupiter or Neptune.Unexpected Ring SystemsPositions of the centaurs in our solar system (green). Giant planets (red), Jupiter trojans (grey), scattered disk objects (tan) and Kuiper belt objects (blue) are also shown. [WilyD]Centaurs are minor planets in our solar system that orbit between Jupiter and Neptune. These bodies of which there are roughly 44,000 with diameters larger than 1 km have dynamically unstable orbits that cross paths with those of one or more giant planets.Recent occultation observations of two centaurs, 10199 Chariklo and 2060 Chiron, revealed that these bodies both host narrow ring systems. Besides our four giant planets, Chariklo and Chiron are the only other bodies in the solar system known to have rings. But how did these rings form?Scientists have proposed several models, implicating collisions, disruption of a primordial satellite, or dusty outgassing. But a team of scientists led by Ryuki Hyodo (Paris Institute of Earth Physics, Kobe University) has recently proposed an alternative scenario: what if the rings were formed from partial disruption of the centaur itself, after it crossed just a little too close to a giant planet?Tidal Forces from a GiantHyodo and collaborators first used past studies of centaur orbits to estimate that roughly 10% of centaurs experience close encounters (passing within a distance of ~2x the planetary radius) with a giant planet during their million-year lifetime. The team then performed a series of simulations of close encounters between a giant planet and a differentiated centaur a body in which the rocky material has sunk to form a dense silicate core, surrounded by an icy mantle.Some snapshots of simulation outcomes (click for a closer look!) for different initial states of
Economics and Maximum Entropy Production
Lorenz, R. D.
2003-04-01
Price differentials, sales volume and profit can be seen as analogues of temperature difference, heat flow and work or entropy production in the climate system. One aspect in which economic systems exhibit more clarity than the climate is that the empirical and/or statistical mechanical tendency for systems to seek a maximum in production is very evident in economics, in that the profit motive is very clear. Noting the common link between 1/f noise, power laws and Self-Organized Criticality with Maximum Entropy Production, the power law fluctuations in security and commodity prices is not inconsistent with the analogy. There is an additional thermodynamic analogy, in that scarcity is valued. A commodity concentrated among a few traders is valued highly by the many who do not have it. The market therefore encourages via prices the spreading of those goods among a wider group, just as heat tends to diffuse, increasing entropy. I explore some empirical price-volume relationships of metals and meteorites in this context.
AA, closed orbit observation pickup
CERN PhotoLab
1980-01-01
Electrostatic pickups around the circumference of the AA served for the measurement of the closed orbits across the wide momentum range of +- 3% to either side of central orbit. The pickups were of the "shoebox" type, with diagonal cuts, a horizontal and a vertical one mechanically coupled together. They were located where they would not require extra space. The wide ones (very wide indeed: 70 cm), like the one we see here, were placed inside the vacuum chamber of the wide quadrupoles QFW, at maximum dispersion. See also 8001372, 8001383, 8010045
AA, closed orbit observation pickup
CERN PhotoLab
1980-01-01
Electrostatic pickups around the circumference of the AA served for the measurement of the closed orbits across the wide momentum range of +- 3% to either side of central orbit. The pickups were of the "shoebox" type, with diagonal cuts, a horizontal and a vertical one mechanically coupled together. They were located where they would not require extra space. The wide ones (very wide indeed: 70 cm), like the one we see here, were placed inside the vacuum chamber of the wide quadrupoles, QFW, at maximum dispersion. See also 8001372,8001383, 8010042
Objects of maximum electromagnetic chirality
Fernandez-Corbaton, Ivan
2015-01-01
We introduce a definition of the electromagnetic chirality of an object and show that it has an upper bound. The upper bound is attained if and only if the object is transparent for fields of one handedness (helicity). Additionally, electromagnetic duality symmetry, i.e. helicity preservation upon scattering, turns out to be a necessary condition for reciprocal scatterers to attain the upper bound. We use these results to provide requirements for the design of such extremal scatterers. The requirements can be formulated as constraints on the polarizability tensors for dipolar scatterers or as material constitutive relations. We also outline two applications for objects of maximum electromagnetic chirality: A twofold resonantly enhanced and background free circular dichroism measurement setup, and angle independent helicity filtering glasses.
Maximum mutual information regularized classification
Wang, Jim Jing-Yan
2014-09-07
In this paper, a novel pattern classification approach is proposed by regularizing the classifier learning to maximize mutual information between the classification response and the true class label. We argue that, with the learned classifier, the uncertainty of the true class label of a data sample should be reduced by knowing its classification response as much as possible. The reduced uncertainty is measured by the mutual information between the classification response and the true class label. To this end, when learning a linear classifier, we propose to maximize the mutual information between classification responses and true class labels of training samples, besides minimizing the classification error and reducing the classifier complexity. An objective function is constructed by modeling mutual information with entropy estimation, and it is optimized by a gradient descend method in an iterative algorithm. Experiments on two real world pattern classification problems show the significant improvements achieved by maximum mutual information regularization.
The strong maximum principle revisited
Pucci, Patrizia; Serrin, James
In this paper we first present the classical maximum principle due to E. Hopf, together with an extended commentary and discussion of Hopf's paper. We emphasize the comparison technique invented by Hopf to prove this principle, which has since become a main mathematical tool for the study of second order elliptic partial differential equations and has generated an enormous number of important applications. While Hopf's principle is generally understood to apply to linear equations, it is in fact also crucial in nonlinear theories, such as those under consideration here. In particular, we shall treat and discuss recent generalizations of the strong maximum principle, and also the compact support principle, for the case of singular quasilinear elliptic differential inequalities, under generally weak assumptions on the quasilinear operators and the nonlinearities involved. Our principal interest is in necessary and sufficient conditions for the validity of both principles; in exposing and simplifying earlier proofs of corresponding results; and in extending the conclusions to wider classes of singular operators than previously considered. The results have unexpected ramifications for other problems, as will develop from the exposition, e.g. two point boundary value problems for singular quasilinear ordinary differential equations (Sections 3 and 4); the exterior Dirichlet boundary value problem (Section 5); the existence of dead cores and compact support solutions, i.e. dead cores at infinity (Section 7); Euler-Lagrange inequalities on a Riemannian manifold (Section 9); comparison and uniqueness theorems for solutions of singular quasilinear differential inequalities (Section 10). The case of p-regular elliptic inequalities is briefly considered in Section 11.
Changes in context and perception of maximum reaching height.
Wagman, Jeffrey B; Day, Brian M
2014-01-01
Successfully performing a given behavior requires flexibility in both perception and behavior. In particular, doing so requires perceiving whether that behavior is possible across the variety of contexts in which it might be performed. Three experiments investigated how (changes in) context (ie point of observation and intended reaching task) influenced perception of maximum reaching height. The results of experiment 1 showed that perceived maximum reaching height more closely reflected actual reaching ability when perceivers occupied a point of observation that was compatible with that required for the reaching task. The results of experiments 2 and 3 showed that practice perceiving maximum reaching height from a given point of observation improved perception of maximum reaching height from a different point of observation, regardless of whether such practice occurred at a compatible or incompatible point of observation. In general, such findings show bounded flexibility in perception of affordances and are thus consistent with a description of perceptual systems as smart perceptual devices.
Accurate structural correlations from maximum likelihood superpositions.
Douglas L Theobald
2008-02-01
Full Text Available The cores of globular proteins are densely packed, resulting in complicated networks of structural interactions. These interactions in turn give rise to dynamic structural correlations over a wide range of time scales. Accurate analysis of these complex correlations is crucial for understanding biomolecular mechanisms and for relating structure to function. Here we report a highly accurate technique for inferring the major modes of structural correlation in macromolecules using likelihood-based statistical analysis of sets of structures. This method is generally applicable to any ensemble of related molecules, including families of nuclear magnetic resonance (NMR models, different crystal forms of a protein, and structural alignments of homologous proteins, as well as molecular dynamics trajectories. Dominant modes of structural correlation are determined using principal components analysis (PCA of the maximum likelihood estimate of the correlation matrix. The correlations we identify are inherently independent of the statistical uncertainty and dynamic heterogeneity associated with the structural coordinates. We additionally present an easily interpretable method ("PCA plots" for displaying these positional correlations by color-coding them onto a macromolecular structure. Maximum likelihood PCA of structural superpositions, and the structural PCA plots that illustrate the results, will facilitate the accurate determination of dynamic structural correlations analyzed in diverse fields of structural biology.
Maximum entropy production in daisyworld
Maunu, Haley A.; Knuth, Kevin H.
2012-05-01
Daisyworld was first introduced in 1983 by Watson and Lovelock as a model that illustrates how life can influence a planet's climate. These models typically involve modeling a planetary surface on which black and white daisies can grow thus influencing the local surface albedo and therefore also the temperature distribution. Since then, variations of daisyworld have been applied to study problems ranging from ecological systems to global climate. Much of the interest in daisyworld models is due to the fact that they enable one to study self-regulating systems. These models are nonlinear, and as such they exhibit sensitive dependence on initial conditions, and depending on the specifics of the model they can also exhibit feedback loops, oscillations, and chaotic behavior. Many daisyworld models are thermodynamic in nature in that they rely on heat flux and temperature gradients. However, what is not well-known is whether, or even why, a daisyworld model might settle into a maximum entropy production (MEP) state. With the aim to better understand these systems, this paper will discuss what is known about the role of MEP in daisyworld models.
Maximum stellar iron core mass
F W Giacobbe
2003-03-01
An analytical method of estimating the mass of a stellar iron core, just prior to core collapse, is described in this paper. The method employed depends, in part, upon an estimate of the true relativistic mass increase experienced by electrons within a highly compressed iron core, just prior to core collapse, and is signiﬁcantly different from a more typical Chandrasekhar mass limit approach. This technique produced a maximum stellar iron core mass value of 2.69 × 1030 kg (1.35 solar masses). This mass value is very near to the typical mass values found for neutron stars in a recent survey of actual neutron star masses. Although slightly lower and higher neutron star masses may also be found, lower mass neutron stars are believed to be formed as a result of enhanced iron core compression due to the weight of non-ferrous matter overlying the iron cores within large stars. And, higher mass neutron stars are likely to be formed as a result of fallback or accretion of additional matter after an initial collapse event involving an iron core having a mass no greater than 2.69 × 1030 kg.
Maximum Matchings via Glauber Dynamics
Jindal, Anant; Pal, Manjish
2011-01-01
In this paper we study the classic problem of computing a maximum cardinality matching in general graphs $G = (V, E)$. The best known algorithm for this problem till date runs in $O(m \\sqrt{n})$ time due to Micali and Vazirani \\cite{MV80}. Even for general bipartite graphs this is the best known running time (the algorithm of Karp and Hopcroft \\cite{HK73} also achieves this bound). For regular bipartite graphs one can achieve an $O(m)$ time algorithm which, following a series of papers, has been recently improved to $O(n \\log n)$ by Goel, Kapralov and Khanna (STOC 2010) \\cite{GKK10}. In this paper we present a randomized algorithm based on the Markov Chain Monte Carlo paradigm which runs in $O(m \\log^2 n)$ time, thereby obtaining a significant improvement over \\cite{MV80}. We use a Markov chain similar to the \\emph{hard-core model} for Glauber Dynamics with \\emph{fugacity} parameter $\\lambda$, which is used to sample independent sets in a graph from the Gibbs Distribution \\cite{V99}, to design a faster algori...
2011-01-10
...: Establishing Maximum Allowable Operating Pressure or Maximum Operating Pressure Using Record Evidence, and... facilities of their responsibilities, under Federal integrity management (IM) regulations, to perform... system, especially when calculating Maximum Allowable Operating Pressure (MAOP) or Maximum Operating...
Maximum likelihood molecular clock comb: analytic solutions.
Chor, Benny; Khetan, Amit; Snir, Sagi
2006-04-01
Maximum likelihood (ML) is increasingly used as an optimality criterion for selecting evolutionary trees, but finding the global optimum is a hard computational task. Because no general analytic solution is known, numeric techniques such as hill climbing or expectation maximization (EM), are used in order to find optimal parameters for a given tree. So far, analytic solutions were derived only for the simplest model--three taxa, two state characters, under a molecular clock. Four taxa rooted trees have two topologies--the fork (two subtrees with two leaves each) and the comb (one subtree with three leaves, the other with a single leaf). In a previous work, we devised a closed form analytic solution for the ML molecular clock fork. In this work, we extend the state of the art in the area of analytic solutions ML trees to the family of all four taxa trees under the molecular clock assumption. The change from the fork topology to the comb incurs a major increase in the complexity of the underlying algebraic system and requires novel techniques and approaches. We combine the ultrametric properties of molecular clock trees with the Hadamard conjugation to derive a number of topology dependent identities. Employing these identities, we substantially simplify the system of polynomial equations. We finally use tools from algebraic geometry (e.g., Gröbner bases, ideal saturation, resultants) and employ symbolic algebra software to obtain analytic solutions for the comb. We show that in contrast to the fork, the comb has no closed form solutions (expressed by radicals in the input data). In general, four taxa trees can have multiple ML points. In contrast, we can now prove that under the molecular clock assumption, the comb has a unique (local and global) ML point. (Such uniqueness was previously shown for the fork.).
Closed-loop control of magnetotactic bacteria
Khalil, I.S.M.; Pichel, M.P.; Abelmann, L.; Misra, S.
2013-01-01
Realization of point-to-point positioning of a magnetotactic bacterium (MTB) necessitates the application of a relatively large magnetic field gradients to decrease its velocity in the vicinity of a reference position. We investigate an alternative closed-loop control approach to position the MTB. T
Closed-loop control of magnetotactic bacteria
Khalil, I.S.M.; Pichel, Marc Philippe; Pichel, M.P.; Abelmann, Leon; Misra, Sarthak
Realization of point-to-point positioning of a magnetotactic bacterium (MTB) necessitates the application of a relatively large magnetic field gradients to decrease its velocity in the vicinity of a reference position. We investigate an alternative closed-loop control approach to position the MTB.
Microcanonical origin of the maximum entropy principle for open systems.
Lee, Julian; Pressé, Steve
2012-10-01
There are two distinct approaches for deriving the canonical ensemble. The canonical ensemble either follows as a special limit of the microcanonical ensemble or alternatively follows from the maximum entropy principle. We show the equivalence of these two approaches by applying the maximum entropy formulation to a closed universe consisting of an open system plus bath. We show that the target function for deriving the canonical distribution emerges as a natural consequence of partial maximization of the entropy over the bath degrees of freedom alone. By extending this mathematical formalism to dynamical paths rather than equilibrium ensembles, the result provides an alternative justification for the principle of path entropy maximization as well.
Vestige: Maximum likelihood phylogenetic footprinting
Maxwell Peter
2005-05-01
Full Text Available Abstract Background Phylogenetic footprinting is the identification of functional regions of DNA by their evolutionary conservation. This is achieved by comparing orthologous regions from multiple species and identifying the DNA regions that have diverged less than neutral DNA. Vestige is a phylogenetic footprinting package built on the PyEvolve toolkit that uses probabilistic molecular evolutionary modelling to represent aspects of sequence evolution, including the conventional divergence measure employed by other footprinting approaches. In addition to measuring the divergence, Vestige allows the expansion of the definition of a phylogenetic footprint to include variation in the distribution of any molecular evolutionary processes. This is achieved by displaying the distribution of model parameters that represent partitions of molecular evolutionary substitutions. Examination of the spatial incidence of these effects across regions of the genome can identify DNA segments that differ in the nature of the evolutionary process. Results Vestige was applied to a reference dataset of the SCL locus from four species and provided clear identification of the known conserved regions in this dataset. To demonstrate the flexibility to use diverse models of molecular evolution and dissect the nature of the evolutionary process Vestige was used to footprint the Ka/Ks ratio in primate BRCA1 with a codon model of evolution. Two regions of putative adaptive evolution were identified illustrating the ability of Vestige to represent the spatial distribution of distinct molecular evolutionary processes. Conclusion Vestige provides a flexible, open platform for phylogenetic footprinting. Underpinned by the PyEvolve toolkit, Vestige provides a framework for visualising the signatures of evolutionary processes across the genome of numerous organisms simultaneously. By exploiting the maximum-likelihood statistical framework, the complex interplay between mutational
Cooperative localization for next-generation converged networks with closed-form solution
ZHANG Yi-heng; CUI Qi-mei; ZHANG Ping; TAO Xiao-feng
2009-01-01
In this article, a novel cooperative wireless localization scheme based on information fusion is proposed. The scheme combines large-scale arrival time and small-scale distance measurements obtained from the next-generation converged networks. The maximum likelihood (ML) estimate of the terminai's position is derived with closed-form solution, and the Cramtr-Rao lower bound (CRLB) of the estimate error is investigated. Both theoretical analysis and simulation results verify that the proposed localization scheme can significantly enhance the location precision. Moreover, the mean square error of position estimate approximates the CRLB when the number of reference stations increases, which indicates that the proposed ML estimator is asymptotically efficient.
Closed circuit television welding alignment system
Darner, G.S.
1976-09-01
Closed circuit television (CCTV) weld targeting systems were developed to provide accurate and repeatable positioning of the electrode of an electronic arc welder with respect to the parts being joined. A sliding mirror electrode holder was developed for use with closed circuit television equipment on existing weld fixturing. A complete motorized CCTV weld alignment system was developed to provide weld targeting for even the most critical positioning requirements.
Propane spectral resolution enhancement by the maximum entropy method
Bonavito, N. L.; Stewart, K. P.; Hurley, E. J.; Yeh, K. C.; Inguva, R.
1990-01-01
The Burg algorithm for maximum entropy power spectral density estimation is applied to a time series of data obtained from a Michelson interferometer and compared with a standard FFT estimate for resolution capability. The propane transmittance spectrum was estimated by use of the FFT with a 2 to the 18th data sample interferogram, giving a maximum unapodized resolution of 0.06/cm. This estimate was then interpolated by zero filling an additional 2 to the 18th points, and the final resolution was taken to be 0.06/cm. Comparison of the maximum entropy method (MEM) estimate with the FFT was made over a 45/cm region of the spectrum for several increasing record lengths of interferogram data beginning at 2 to the 10th. It is found that over this region the MEM estimate with 2 to the 16th data samples is in close agreement with the FFT estimate using 2 to the 18th samples.
Maximum-entropy probability distributions under Lp-norm constraints
Dolinar, S.
1991-01-01
Continuous probability density functions and discrete probability mass functions are tabulated which maximize the differential entropy or absolute entropy, respectively, among all probability distributions with a given L sub p norm (i.e., a given pth absolute moment when p is a finite integer) and unconstrained or constrained value set. Expressions for the maximum entropy are evaluated as functions of the L sub p norm. The most interesting results are obtained and plotted for unconstrained (real valued) continuous random variables and for integer valued discrete random variables. The maximum entropy expressions are obtained in closed form for unconstrained continuous random variables, and in this case there is a simple straight line relationship between the maximum differential entropy and the logarithm of the L sub p norm. Corresponding expressions for arbitrary discrete and constrained continuous random variables are given parametrically; closed form expressions are available only for special cases. However, simpler alternative bounds on the maximum entropy of integer valued discrete random variables are obtained by applying the differential entropy results to continuous random variables which approximate the integer valued random variables in a natural manner. All the results are presented in an integrated framework that includes continuous and discrete random variables, constraints on the permissible value set, and all possible values of p. Understanding such as this is useful in evaluating the performance of data compression schemes.
Fausing, Bent
2013-01-01
Investigations in the close-up and its meaning regarding nearness, abstraction and transparency. Face, facelike and animism are also major key-words in thsi article... . I have always been fascinated with the close-up, not as an end, but a filter of opportunities to open up for and nearness of tr...
De Witt, Peter M.; Moccia, Josephine
2011-01-01
When a beloved school closes, community emotions run high. De Witt and Moccia, administrators in the Averill Park School District in upstate New York, describe how their district navigated through parents' anger and practical matters in closing a small neighborhood elementary school and transferring all its students to another school. With a group…
Sequential and Parallel Algorithms for Finding a Maximum Convex Polygon
Fischer, Paul
1997-01-01
such a polygon which is maximal with respect to area can be found in time O(n³ log n). With the same running time one can also find such a polygon which contains a maximum number of positive points. If, in addition, the number of vertices of the polygon is restricted to be at most M, then the running time...
Receiver function estimated by maximum entropy deconvolution
吴庆举; 田小波; 张乃铃; 李卫平; 曾融生
2003-01-01
Maximum entropy deconvolution is presented to estimate receiver function, with the maximum entropy as the rule to determine auto-correlation and cross-correlation functions. The Toeplitz equation and Levinson algorithm are used to calculate the iterative formula of error-predicting filter, and receiver function is then estimated. During extrapolation, reflective coefficient is always less than 1, which keeps maximum entropy deconvolution stable. The maximum entropy of the data outside window increases the resolution of receiver function. Both synthetic and real seismograms show that maximum entropy deconvolution is an effective method to measure receiver function in time-domain.
Maximum Power from a Solar Panel
Michael Miller
2010-01-01
Full Text Available Solar energy has become a promising alternative to conventional fossil fuel sources. Solar panels are used to collect solar radiation and convert it into electricity. One of the techniques used to maximize the effectiveness of this energy alternative is to maximize the power output of the solar collector. In this project the maximum power is calculated by determining the voltage and the current of maximum power. These quantities are determined by finding the maximum value for the equation for power using differentiation. After the maximum values are found for each time of day, each individual quantity, voltage of maximum power, current of maximum power, and maximum power is plotted as a function of the time of day.
Street, Ross
2012-01-01
Spurred by the new examples found by Kornel Szlach\\'anyi of a form of lax monoidal category, the author felt the time ripe to publish a reworking of Eilenberg-Kelly's original paper on closed categories appropriate to the laxer context. The new examples are connected with bialgebroids. With Stephen Lack, we have also used the concept to give an alternative definition of quantum category and quantum groupoid. Szlach\\'anyi has called the lax notion {\\em skew monoidal}. This paper defines {\\em skew closed category}, proves Yoneda lemmas for categories enriched over such, and looks at closed cocompletion.
Social Security Administration — This file is used to hold information about disability claims that have been closed and have been selected for sampling.Sampling is the process whereby OQR reviews...
Mitigation : Closed Basin Project
US Fish and Wildlife Service, Department of the Interior — The upcoming meeting on waterfowl mitigation for the Closed Basin Project will have several people talk about possible changes to the waterfowl mitigation program. A...
The timing of the maximum extent of the Rhone Glacier at Wangen a.d. Aare
Ivy-Ochs, S.; Schluechter, C. [Bern Univ. (Switzerland); Kubik, P.W. [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Beer, J. [EAWAG, Duebendorf (Switzerland)
1997-09-01
Erratic blocks found in the region of Wangen a.d. Aare delineate the maximum position of the Solothurn lobe of the Rhone Glacier. {sup 10}Be and {sup 26}Al exposure ages of three of these blocks show that the glacier withdraw from its maximum position at or slightly before 20,000{+-}1800 years ago. (author) 1 fig., 5 refs.
On the Effect of Mortgages of Maximum Amount
YangZongping
2005-01-01
Since the enactment of the PRC Guarantee Law, mortgages of maximum amount has won wide application in a variety of business occupations and particularly in banking. Compared with the rich content of the 21clause statute on mortgages of maximum amount in Japan's Civil Law, the Chinese law has only four principled clauses. Its lack of operability plus its legislative gaps and defects has a severe impact on the positive effectiveness of the law. The core issue is the question of effectiveness. Because the principles stipulated in the Law run counter to the diversity of its actual practices,
Modified maximum likelihood registration based on information fusion
Yongqing Qi; Zhongliang Jing; Shiqiang Hu
2007-01-01
The bias estimation of passive sensors is considered based on information fusion in multi-platform multisensor tracking system. The unobservable problem of bearing-only tracking in blind spot is analyzed. A modified maximum likelihood method, which uses the redundant information of multi-sensor system to calculate the target position, is investigated to estimate the biases. Monte Carlo simulation results show that the modified method eliminates the effect of unobservable problem in the blind spot and can estimate the biases more rapidly and accurately than maximum likelihood method. It is statistically efficient since the standard deviation of bias estimation errors meets the theoretical lower bounds.
Generalized Relativistic Wave Equations with Intrinsic Maximum Momentum
Ching, Chee Leong
2013-01-01
We examine the nonperturbative effect of maximum momentum on the relativistic wave equations. In momentum representation, we obtain the exact eigen-energies and wavefunctions of one-dimensional Klein-Gordon and Dirac equation with linear confining potentials, and the Dirac oscillator. Bound state solutions are only possible when the strength of scalar potential are stronger than vector potential. The energy spectrum of the systems studied are bounded from above, whereby classical characteristics are observed in the uncertainties of position and momentum operators. Also, there is a truncation in the maximum number of bound states that is allowed. Some of these quantum-gravitational features may have future applications.
Generalized relativistic wave equations with intrinsic maximum momentum
Ching, Chee Leong; Ng, Wei Khim
2014-05-01
We examine the nonperturbative effect of maximum momentum on the relativistic wave equations. In momentum representation, we obtain the exact eigen-energies and wave functions of one-dimensional Klein-Gordon and Dirac equation with linear confining potentials, and the Dirac oscillator. Bound state solutions are only possible when the strength of scalar potential is stronger than vector potential. The energy spectrum of the systems studied is bounded from above, whereby classical characteristics are observed in the uncertainties of position and momentum operators. Also, there is a truncation in the maximum number of bound states that is allowed. Some of these quantum-gravitational features may have future applications.
The inverse maximum dynamic flow problem
BAGHERIAN; Mehri
2010-01-01
We consider the inverse maximum dynamic flow (IMDF) problem.IMDF problem can be described as: how to change the capacity vector of a dynamic network as little as possible so that a given feasible dynamic flow becomes a maximum dynamic flow.After discussing some characteristics of this problem,it is converted to a constrained minimum dynamic cut problem.Then an efficient algorithm which uses two maximum dynamic flow algorithms is proposed to solve the problem.
Maximum permissible voltage of YBCO coated conductors
Wen, J.; Lin, B.; Sheng, J.; Xu, J.; Jin, Z. [Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China); Hong, Z., E-mail: zhiyong.hong@sjtu.edu.cn [Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China); Wang, D.; Zhou, H.; Shen, X.; Shen, C. [Qingpu Power Supply Company, State Grid Shanghai Municipal Electric Power Company, Shanghai (China)
2014-06-15
Highlights: • We examine three kinds of tapes’ maximum permissible voltage. • We examine the relationship between quenching duration and maximum permissible voltage. • Continuous I{sub c} degradations under repetitive quenching where tapes reaching maximum permissible voltage. • The relationship between maximum permissible voltage and resistance, temperature. - Abstract: Superconducting fault current limiter (SFCL) could reduce short circuit currents in electrical power system. One of the most important thing in developing SFCL is to find out the maximum permissible voltage of each limiting element. The maximum permissible voltage is defined as the maximum voltage per unit length at which the YBCO coated conductors (CC) do not suffer from critical current (I{sub c}) degradation or burnout. In this research, the time of quenching process is changed and voltage is raised until the I{sub c} degradation or burnout happens. YBCO coated conductors test in the experiment are from American superconductor (AMSC) and Shanghai Jiao Tong University (SJTU). Along with the quenching duration increasing, the maximum permissible voltage of CC decreases. When quenching duration is 100 ms, the maximum permissible of SJTU CC, 12 mm AMSC CC and 4 mm AMSC CC are 0.72 V/cm, 0.52 V/cm and 1.2 V/cm respectively. Based on the results of samples, the whole length of CCs used in the design of a SFCL can be determined.
Closed Loop Subspace Identification
Geir W. Nilsen
2005-07-01
Full Text Available A new three step closed loop subspace identifications algorithm based on an already existing algorithm and the Kalman filter properties is presented. The Kalman filter contains noise free states which implies that the states and innovation are uneorre lated. The idea is that a Kalman filter found by a good subspace identification algorithm will give an output which is sufficiently uncorrelated with the noise on the output of the actual process. Using feedback from the output of the estimated Kalman filter in the closed loop system a subspace identification algorithm can be used to estimate an unbiased model.
Spatio-temporal observations of tertiary ozone maximum
V. F. Sofieva
2009-03-01
Full Text Available We present spatio-temporal distributions of tertiary ozone maximum (TOM, based on GOMOS (Global Ozone Monitoring by Occultation of Stars ozone measurements in 2002–2006. The tertiary ozone maximum is typically observed in the high-latitude winter mesosphere at altitude ~72 km. Although the explanation for this phenomenon has been found recently – low concentrations of odd-hydrogen cause the subsequent decrease in odd-oxygen losses – models have had significant deviations from existing observations until recently. Good coverage of polar night regions by GOMOS data has allowed for the first time obtaining spatial and temporal observational distributions of night-time ozone mixing ratio in the mesosphere.
The distributions obtained from GOMOS data have specific features, which are variable from year to year. In particular, due to a long lifetime of ozone in polar night conditions, the downward transport of polar air by the meridional circulation is clearly observed in the tertiary ozone maximum time series. Although the maximum tertiary ozone mixing ratio is achieved close to the polar night terminator (as predicted by the theory, TOM can be observed also at very high latitudes, not only in the beginning and at the end, but also in the middle of winter. We have compared the observational spatio-temporal distributions of tertiary ozone maximum with that obtained using WACCM (Whole Atmosphere Community Climate Model and found that the specific features are reproduced satisfactorily by the model.
Since ozone in the mesosphere is very sensitive to HO_{x} concentrations, energetic particle precipitation can significantly modify the shape of the ozone profiles. In particular, GOMOS observations have shown that the tertiary ozone maximum was temporarily destroyed during the January 2005 and December 2006 solar proton events as a result of the HO_{x} enhancement from the increased ionization.
The problem of the maximum volumes and particle horizon in the Friedmann universe model
Gong, S. M.
1989-08-01
The maximum volume of the closed Friedmann universe is further investigated and is shown to be 2 x pi squared x R cubed (t), instead of pi squared x R cubed (t) as found previously. This discrepancy comes from the incomplete use of the volume formula of 3-dimensional spherical space in the astronomical literature. Mathematically, the maximum volume exists at any cosmic time t in a 3-dimensional spherical case. However, the Friedmann closed universe in expansion reaches its maximum volume only at the time of the maximum scale factor. The particle horizon has no limitation for the farthest objects in the closed Friedmann universe if the proper distance of objects is compared with the particle horizon as is should be. This leads to absurdity if the luminosity distance of objects is compared with the proper distance of the particle horizon.
Generalised maximum entropy and heterogeneous technologies
Oude Lansink, A.G.J.M.
1999-01-01
Generalised maximum entropy methods are used to estimate a dual model of production on panel data of Dutch cash crop farms over the period 1970-1992. The generalised maximum entropy approach allows a coherent system of input demand and output supply equations to be estimated for each farm in the sam
20 CFR 229.48 - Family maximum.
2010-04-01
... month on one person's earnings record is limited. This limited amount is called the family maximum. The family maximum used to adjust the social security overall minimum rate is based on the employee's Overall..., when any of the persons entitled to benefits on the insured individual's compensation would, except...
The maximum rotation of a galactic disc
Bottema, R
1997-01-01
The observed stellar velocity dispersions of galactic discs show that the maximum rotation of a disc is on average 63% of the observed maximum rotation. This criterion can, however, not be applied to small or low surface brightness (LSB) galaxies because such systems show, in general, a continuously
Duality of Maximum Entropy and Minimum Divergence
Shinto Eguchi
2014-06-01
Full Text Available We discuss a special class of generalized divergence measures by the use of generator functions. Any divergence measure in the class is separated into the difference between cross and diagonal entropy. The diagonal entropy measure in the class associates with a model of maximum entropy distributions; the divergence measure leads to statistical estimation via minimization, for arbitrarily giving a statistical model. The dualistic relationship between the maximum entropy model and the minimum divergence estimation is explored in the framework of information geometry. The model of maximum entropy distributions is characterized to be totally geodesic with respect to the linear connection associated with the divergence. A natural extension for the classical theory for the maximum likelihood method under the maximum entropy model in terms of the Boltzmann-Gibbs-Shannon entropy is given. We discuss the duality in detail for Tsallis entropy as a typical example.
Zhong Hua SHI; Mao Chu GONG; Yao Qiang CHEN
2006-01-01
A catalyst comprised novel high surface area alumina support was prepared to control emission of automobiles. The results showed that prepared catalyst could satisfy the requirements of a high performance close coupled catalyst for its good catalytic activity at low temperature and good stability at high temperature.
Resolution of overlapping ambiguity strings based on maximum entropy model
ZHANG Feng; FAN Xiao-zhong
2006-01-01
The resolution of overlapping ambiguity strings (OAS) is studied based on the maximum entropy model.There are two model outputs,where either the first two characters form a word or the last two characters form a word.The features of the model include one word in context of OAS,the current OAS and word probability relation of two kinds of segmentation results.OAS in training text is found by the combination of the FMM and BMM segmentation method.After feature tagging they are used to train the maximum entropy model.The People Daily corpus of January 1998 is used in training and testing.Experimental results show a closed test precision of 98.64% and an open test precision of 95.01%.The open test precision is 3,76% better compared with that of the precision of common word probability method.
MSClique: Multiple Structure Discovery through the Maximum Weighted Clique Problem.
Sanroma, Gerard; Penate-Sanchez, Adrian; Alquézar, René; Serratosa, Francesc; Moreno-Noguer, Francesc; Andrade-Cetto, Juan; González Ballester, Miguel Ángel
2016-01-01
We present a novel approach for feature correspondence and multiple structure discovery in computer vision. In contrast to existing methods, we exploit the fact that point-sets on the same structure usually lie close to each other, thus forming clusters in the image. Given a pair of input images, we initially extract points of interest and extract hierarchical representations by agglomerative clustering. We use the maximum weighted clique problem to find the set of corresponding clusters with maximum number of inliers representing the multiple structures at the correct scales. Our method is parameter-free and only needs two sets of points along with their tentative correspondences, thus being extremely easy to use. We demonstrate the effectiveness of our method in multiple-structure fitting experiments in both publicly available and in-house datasets. As shown in the experiments, our approach finds a higher number of structures containing fewer outliers compared to state-of-the-art methods.
On closed weak supplemented modules
ZENG Qing-yi; SHI Mei-hua
2006-01-01
A module M is called closed weak supplemented if for any closed submodule N of M, there is a submodule K of M such that M=K+N and K(c)N＜＜M. Any direct summand of closed weak supplemented module is also closed weak supplemented.Any nonsingular image of closed weak supplemented module is closed weak supplemented. Nonsingular V-rings in which all nonsingular modules are closed weak supplemented are characterized in Section 4.
Multi-digit maximum voluntary torque production on a circular object
SHIM, JAE KUN; HUANG, JUNFENG; HOOKE, ALEXANDER W.; LATSH, MARK L.; ZATSIORSKY, VLADIMIR M.
2010-01-01
Individual digit-tip forces and moments during torque production on a mechanically fixed circular object were studied. During the experiments, subjects positioned each digit on a 6-dimensional force/moment sensor attached to a circular handle and produced a maximum voluntary torque on the handle. The torque direction and the orientation of the torque axis were varied. From this study, it is concluded that: (1) the maximum torque in the closing (clockwise) direction was larger than in the opening (counter clockwise) direction; (2) the thumb and little finger had the largest and the smallest share of both total normal force and total moment, respectively; (3) the sharing of total moment between individual digits was not affected by the orientation of the torque axis or by the torque direction, while the sharing of total normal force between the individual digit varied with torque direction; (4) the normal force safety margins were largest and smallest in the thumb and little finger, respectively. PMID:17454086
Study of maximum pressure for composite hepta-tubular powders
M. C. Gupta
1959-10-01
Full Text Available In this paper the expressions for maximum pressure occurring positions in the case of composite hepta-tubular powers used in conventional guns and the corresponding conditions have been derived under certain conditions, viz., the value of n, the ratio of specific heats, has been assumed to be the same for both the charges and the covolume corrections have not been neglected.
Prosman, Ernst-Jan; Wæhrens, Brian Vejrum; Liotta, Giacomo
2017-01-01
Replacing virgin materials with waste materials, a practice known as Industrial Symbiosis (IS), has been identified as a key strategy for closing material loops. This article adopts a critical view on geographic proximity and external coordinators – two key enablers of IS. By ‘uncovering’ a case...... where both enablers are absent, this study seeks to explore firm-level challenges of IS. We adopt an exploratory case study approach at a cement manufacturer who engages in cross-border IS without the support of external coordinators. Our research presents insights into two key areas of IS: 1) setting...... for geographic proximity and external coordinators. In doing so, our insights into firm-level challenges of long-distance IS exchanges contribute to closing global material loops by increasing the number of potential circular pathways....
Stefanović-Stanojević Tatjana Z.
2002-01-01
Full Text Available According to the theory of emotional attachment, specific emotional relationships are being established at an early age between a child and its parents. On the basis of the quality of these relationships the child creates the so-called internal working model ie the image of itself as well as others. The working model persists throughout one's lifetime, shaping in part the quality of adult relationships. Thus, a dominant adult relationship is a close, partner or love one. Within the indicated theoretical context, we were interested in finding out whether there is a statistically significant link between the emotional ties of parents and their children formed in early childhood. The investigation included 180 grown-ups of the same sex and age. For investigating close partner relationships the test Experience in Close Relationship by the American authors (Brenan K.A., Clark C.L., & Shaver P.R. 1998. was used, while the early emotional relationships were investigated using a test which has been the only one so far to measure this quality in adults - Adult Attachment Interview, (Main M., Casidy J., & Kaplan N., 1985. The results show there is a statistically significant link between the observed variables.
A dual method for maximum entropy restoration
Smith, C. B.
1979-01-01
A simple iterative dual algorithm for maximum entropy image restoration is presented. The dual algorithm involves fewer parameters than conventional minimization in the image space. Minicomputer test results for Fourier synthesis with inadequate phantom data are given.
Photoemission spectromicroscopy with MAXIMUM at Wisconsin
Ng, W.; Ray-Chaudhuri, A.K.; Cole, R.K.; Wallace, J.; Crossley, S.; Crossley, D.; Chen, G.; Green, M.; Guo, J.; Hansen, R.W.C.; Cerrina, F.; Margaritondo, G. (Dept. of Electrical Engineering, Dept. of Physics and Synchrotron Radiation Center, Univ. of Wisconsin, Madison (USA)); Underwood, J.H.; Korthright, J.; Perera, R.C.C. (Center for X-ray Optics, Accelerator and Fusion Research Div., Lawrence Berkeley Lab., CA (USA))
1990-06-01
We describe the development of the scanning photoemission spectromicroscope MAXIMUM at the Wisoncsin Synchrotron Radiation Center, which uses radiation from a 30-period undulator. The article includes a discussion of the first tests after the initial commissioning. (orig.).
Maximum-likelihood method in quantum estimation
Paris, M G A; Sacchi, M F
2001-01-01
The maximum-likelihood method for quantum estimation is reviewed and applied to the reconstruction of density matrix of spin and radiation as well as to the determination of several parameters of interest in quantum optics.
Social Security Administration — The Position Information Data Asset provides the ability to search for active SSA position descriptions using various search criteria. An individual may search by PD...
19 CFR 114.23 - Maximum period.
2010-04-01
... 19 Customs Duties 1 2010-04-01 2010-04-01 false Maximum period. 114.23 Section 114.23 Customs... CARNETS Processing of Carnets § 114.23 Maximum period. (a) A.T.A. carnet. No A.T.A. carnet with a period of validity exceeding 1 year from date of issue shall be accepted. This period of validity cannot be...
Maximum-Likelihood Detection Of Noncoherent CPM
Divsalar, Dariush; Simon, Marvin K.
1993-01-01
Simplified detectors proposed for use in maximum-likelihood-sequence detection of symbols in alphabet of size M transmitted by uncoded, full-response continuous phase modulation over radio channel with additive white Gaussian noise. Structures of receivers derived from particular interpretation of maximum-likelihood metrics. Receivers include front ends, structures of which depends only on M, analogous to those in receivers of coherent CPM. Parts of receivers following front ends have structures, complexity of which would depend on N.
SEXUAL DIMORPHISM OF MAXIMUM FEMORAL LENGTH
Pandya A M
2011-04-01
Full Text Available Sexual identification from the skeletal parts has medico legal and anthropological importance. Present study aims to obtain values of maximum femoral length and to evaluate its possible usefulness in determining correct sexual identification. Study sample consisted of 184 dry, normal, adult, human femora (136 male & 48 female from skeletal collections of Anatomy department, M. P. Shah Medical College, Jamnagar, Gujarat. Maximum length of femur was considered as maximum vertical distance between upper end of head of femur and the lowest point on femoral condyle, measured with the osteometric board. Mean Values obtained were, 451.81 and 417.48 for right male and female, and 453.35 and 420.44 for left male and female respectively. Higher value in male was statistically highly significant (P< 0.001 on both sides. Demarking point (D.P. analysis of the data showed that right femora with maximum length more than 476.70 were definitely male and less than 379.99 were definitely female; while for left bones, femora with maximum length more than 484.49 were definitely male and less than 385.73 were definitely female. Maximum length identified 13.43% of right male femora, 4.35% of right female femora, 7.25% of left male femora and 8% of left female femora. [National J of Med Res 2011; 1(2.000: 67-70
Peterson, Christopher
2009-01-01
Positive psychology is a deliberate correction to the focus of psychology on problems. Positive psychology does not deny the difficulties that people may experience but does suggest that sole attention to disorder leads to an incomplete view of the human condition. Positive psychologists concern themselves with four major topics: (1) positive…
Simulations of Closed Timelike Curves
Brun, Todd A.; Wilde, Mark M.
2017-03-01
Proposed models of closed timelike curves (CTCs) have been shown to enable powerful information-processing protocols. We examine the simulation of models of CTCs both by other models of CTCs and by physical systems without access to CTCs. We prove that the recently proposed transition probability CTCs (T-CTCs) are physically equivalent to postselection CTCs (P-CTCs), in the sense that one model can simulate the other with reasonable overhead. As a consequence, their information-processing capabilities are equivalent. We also describe a method for quantum computers to simulate Deutschian CTCs (but with a reasonable overhead only in some cases). In cases for which the overhead is reasonable, it might be possible to perform the simulation in a table-top experiment. This approach has the benefit of resolving some ambiguities associated with the equivalent circuit model of Ralph et al. Furthermore, we provide an explicit form for the state of the CTC system such that it is a maximum-entropy state, as prescribed by Deutsch.
Mannings, Robin
2008-01-01
This groundbreaking resource offers a practical, in-depth understanding of Ubiquitous Positioning - positioning systems that identify the location and position of people, vehicles and objects in time and space in the digitized networked economy. The future and growth of ubiquitous positioning will be fueled by the convergence of many other areas of technology, from mobile telematics, Internet technology, and location systems, to sensing systems, geographic information systems, and the semantic web. This first-of-its-kind volume explores ubiquitous positioning from a convergence perspective, of
Halkier, Bente; Keller, Margit
2014-01-01
positionings emerges based on empirical examples of research in parent–children consumption. Positionings are flexible discursive fixations of the relationship between the performances of the practitioner, other practitioners, media discourse and consumption activities. The basic positioning types...... are the practice maintenance and the practice change position, with different sorts of adapting in between. Media discourse can become a resource for a resistant position against social control or for an appropriating position in favour of space for action. Regardless of the current relation to a particular media...... discourse, practitioners attempt to maintain their self-positioning of competence when performing. This leads us, as researchers, to caution against any a priori anticipation of the anchoring power of media discourses within everyday activities....
Modularity maximization using completely positive programming
Yazdanparast, Sakineh; Havens, Timothy C.
2017-04-01
Community detection is one of the most prominent problems of social network analysis. In this paper, a novel method for Modularity Maximization (MM) for community detection is presented which exploits the Alternating Direction Augmented Lagrangian (ADAL) method for maximizing a generalized form of Newman's modularity function. We first transform Newman's modularity function into a quadratic program and then use Completely Positive Programming (CPP) to map the quadratic program to a linear program, which provides the globally optimal maximum modularity partition. In order to solve the proposed CPP problem, a closed form solution using the ADAL merged with a rank minimization approach is proposed. The performance of the proposed method is evaluated on several real-world data sets used for benchmarks community detection. Simulation results shows the proposed technique provides outstanding results in terms of modularity value for crisp partitions.
Feden, Jeffrey P
2013-04-01
Pulmonary injuries from blunt thoracic trauma are seen regularly with high-energy mechanisms but described less frequently in association with sports. Pneumothorax, hemothorax, pneumomediastinum, and pulmonary contusion are uncommon with athletic participation and often follow a benign clinical course. Life-threatening complications may arise, and athletes with chest trauma deserve close attention. Appropriate diagnosis is suggested by history and physical examination; conventional chest radiography is preferred as the initial imaging study but has limitations. Use of CT for trauma has improved diagnostic sensitivity for occult injury, although this may not alter management or outcomes. Return to play is guided by resolution of symptoms and radiographic findings.
Closed-universe recollapse conjecture
Barrow, J.D.; Galloway, G.J.; Tipler, F.J.
1986-12-15
It is widely believed that all expanding S/sup 3/ closed universes that satisfy the standard energy conditions recollapse to a second singularity. It is shown that this is false even for Friedmann universes: an ever-expanding S/sup 3/ Friedmann universe is constructed in which the matter tensor satisfies the strong, weak and dominant energy conditions and the generic condition. A general recollapse theorem for Friedmann universes is proved if the positive pressure criterion, dominant enery condition and matter regularity condition hold, then an S/sup 3/ Friedmann universe must recollapse. It is shown that all known vacuum solutions with Cauchy surface topology S/sup 3/ or S/sup 2/XS/sup 1/ recollapse, and we conjecture that this is a property of all vacuum solutions of Einstein's equations with such Cauchy surfaces.
High-resolution interpolar difference of atmospheric methane around the Last Glacial Maximum
M. Baumgartner
2012-05-01
Full Text Available Reconstructions of past atmospheric methane concentrations are available from ice cores from both, Greenland and Antarctica. The difference observed between the two polar methane concentration levels is a valuable additional parameter which allows to constrain the geographical location of the responsible methane sources. Here we present new high-resolution methane records from the North Greenland Ice Core Project (NGRIP and the European Project for Ice Coring in Antarctica (EPICA Dronning Maud Land (EDML ice cores covering Termination 1, the Last Glacial Maximum, and parts of the last glacial back to 32 000 years before present. Due to the high-resolution records the synchronisation between the ice cores from NGRIP and EDML is considerably improved and the interpolar concentration difference of methane is determined with unprecedented precision and temporal resolution. Relative to the mean methane concentration, we find a rather stable positive interpolar difference throughout the record with its minimum value of 3.7 ± 0.7 % between 21 900–21 200 years before present, which is higher than previously estimated in this interval close to the Last Glacial Maximum. This implies that Northern Hemisphere boreal wetland sources were never completely shut off during the peak glacial. Starting at 21 000 years before present, i.e. severval millenia prior to the transition into the Holocene, the relative interpolar difference becomes even more positive and stays at a fairly stable level of 6.5 ± 0.8 % during Termination 1. We hypothesise that the anti-correlation observed in the monsoon records from the Northern and Southern Hemispheres induces a methane source redistribution within lower latitudes, which could explain parts of the variations in the interpolar difference.
High-resolution interpolar difference of atmospheric methane around the Last Glacial Maximum
Baumgartner, M.; Schilt, A.; Eicher, O.; Schmitt, J.; Schwander, J.; Spahni, R.; Fischer, H.; Stocker, T. F.
2012-10-01
Reconstructions of past atmospheric methane concentrations are available from ice cores from both Greenland and Antarctica. The difference observed between the two polar methane concentration levels represents a valuable constraint on the geographical location of the methane sources. Here we present new high-resolution methane records from the North Greenland Ice Core Project (NGRIP) and the European Project for Ice Coring in Antarctica (EPICA) Dronning Maud Land (EDML) ice cores covering Termination 1, the Last Glacial Maximum, and parts of the last glacial back to 32 000 years before present. Due to the high resolution of the records, the synchronisation between the ice cores from NGRIP and EDML is considerably improved, and the interpolar concentration difference of methane is determined with unprecedented precision and temporal resolution. Relative to the mean methane concentration, we find a rather stable positive relative interpolar difference throughout the record with its minimum value of 3.7 ± 0.7 % between 21 900-21 200 years before present, which is higher than previously estimated in this interval close to the Last Glacial Maximum. This implies that Northern Hemisphere boreal wetland sources were never completely shut off during the peak glacial, as suggested from previous bipolar methane concentration records. Starting at 21 000 years before present, i.e. several millennia prior to the transition into the Holocene, the relative interpolar difference becomes even more positive and stays at a fairly stable level of 6.5 ± 0.8 % during Termination 1. We thus find that the boreal and tropical methane sources increased by approximately the same factor during Termination 1. We hypothesise that latitudinal shifts in the Intertropical Convergence Zone (ITCZ) and the monsoon system contribute, either by dislocation of the methane source regions or, in case of the ITCZ, also by changing the relative atmospheric volumes of the Northern and Southern Hemispheres
Maximum permissible voltage of YBCO coated conductors
Wen, J.; Lin, B.; Sheng, J.; Xu, J.; Jin, Z.; Hong, Z.; Wang, D.; Zhou, H.; Shen, X.; Shen, C.
2014-06-01
Superconducting fault current limiter (SFCL) could reduce short circuit currents in electrical power system. One of the most important thing in developing SFCL is to find out the maximum permissible voltage of each limiting element. The maximum permissible voltage is defined as the maximum voltage per unit length at which the YBCO coated conductors (CC) do not suffer from critical current (Ic) degradation or burnout. In this research, the time of quenching process is changed and voltage is raised until the Ic degradation or burnout happens. YBCO coated conductors test in the experiment are from American superconductor (AMSC) and Shanghai Jiao Tong University (SJTU). Along with the quenching duration increasing, the maximum permissible voltage of CC decreases. When quenching duration is 100 ms, the maximum permissible of SJTU CC, 12 mm AMSC CC and 4 mm AMSC CC are 0.72 V/cm, 0.52 V/cm and 1.2 V/cm respectively. Based on the results of samples, the whole length of CCs used in the design of a SFCL can be determined.
Computing Rooted and Unrooted Maximum Consistent Supertrees
van Iersel, Leo
2009-01-01
A chief problem in phylogenetics and database theory is the computation of a maximum consistent tree from a set of rooted or unrooted trees. A standard input are triplets, rooted binary trees on three leaves, or quartets, unrooted binary trees on four leaves. We give exact algorithms constructing rooted and unrooted maximum consistent supertrees in time O(2^n n^5 m^2 log(m)) for a set of m triplets (quartets), each one distinctly leaf-labeled by some subset of n labels. The algorithms extend to weighted triplets (quartets). We further present fast exact algorithms for constructing rooted and unrooted maximum consistent trees in polynomial space. Finally, for a set T of m rooted or unrooted trees with maximum degree D and distinctly leaf-labeled by some subset of a set L of n labels, we compute, in O(2^{mD} n^m m^5 n^6 log(m)) time, a tree distinctly leaf-labeled by a maximum-size subset X of L that all trees in T, when restricted to X, are consistent with.
Maximum magnitude earthquakes induced by fluid injection
McGarr, Arthur F.
2014-01-01
Analysis of numerous case histories of earthquake sequences induced by fluid injection at depth reveals that the maximum magnitude appears to be limited according to the total volume of fluid injected. Similarly, the maximum seismic moment seems to have an upper bound proportional to the total volume of injected fluid. Activities involving fluid injection include (1) hydraulic fracturing of shale formations or coal seams to extract gas and oil, (2) disposal of wastewater from these gas and oil activities by injection into deep aquifers, and (3) the development of enhanced geothermal systems by injecting water into hot, low-permeability rock. Of these three operations, wastewater disposal is observed to be associated with the largest earthquakes, with maximum magnitudes sometimes exceeding 5. To estimate the maximum earthquake that could be induced by a given fluid injection project, the rock mass is assumed to be fully saturated, brittle, to respond to injection with a sequence of earthquakes localized to the region weakened by the pore pressure increase of the injection operation and to have a Gutenberg-Richter magnitude distribution with a b value of 1. If these assumptions correctly describe the circumstances of the largest earthquake, then the maximum seismic moment is limited to the volume of injected liquid times the modulus of rigidity. Observations from the available case histories of earthquakes induced by fluid injection are consistent with this bound on seismic moment. In view of the uncertainties in this analysis, however, this should not be regarded as an absolute physical limit.
Maximum magnitude earthquakes induced by fluid injection
McGarr, A.
2014-02-01
Analysis of numerous case histories of earthquake sequences induced by fluid injection at depth reveals that the maximum magnitude appears to be limited according to the total volume of fluid injected. Similarly, the maximum seismic moment seems to have an upper bound proportional to the total volume of injected fluid. Activities involving fluid injection include (1) hydraulic fracturing of shale formations or coal seams to extract gas and oil, (2) disposal of wastewater from these gas and oil activities by injection into deep aquifers, and (3) the development of enhanced geothermal systems by injecting water into hot, low-permeability rock. Of these three operations, wastewater disposal is observed to be associated with the largest earthquakes, with maximum magnitudes sometimes exceeding 5. To estimate the maximum earthquake that could be induced by a given fluid injection project, the rock mass is assumed to be fully saturated, brittle, to respond to injection with a sequence of earthquakes localized to the region weakened by the pore pressure increase of the injection operation and to have a Gutenberg-Richter magnitude distribution with a b value of 1. If these assumptions correctly describe the circumstances of the largest earthquake, then the maximum seismic moment is limited to the volume of injected liquid times the modulus of rigidity. Observations from the available case histories of earthquakes induced by fluid injection are consistent with this bound on seismic moment. In view of the uncertainties in this analysis, however, this should not be regarded as an absolute physical limit.
无
2004-01-01
China's recent economic success has brought positive changes to its urban population,but left those in the countryside way behind.The gap in income and living standrs that always existed between urban and rural dwellers has widened alarmingly in the past two decades,causing serious problems.
Maximum Multiflow in Wireless Network Coding
Zhou, Jin-Yi; Jiang, Yong; Zheng, Hai-Tao
2012-01-01
In a multihop wireless network, wireless interference is crucial to the maximum multiflow (MMF) problem, which studies the maximum throughput between multiple pairs of sources and sinks. In this paper, we observe that network coding could help to decrease the impacts of wireless interference, and propose a framework to study the MMF problem for multihop wireless networks with network coding. Firstly, a network model is set up to describe the new conflict relations modified by network coding. Then, we formulate a linear programming problem to compute the maximum throughput and show its superiority over one in networks without coding. Finally, the MMF problem in wireless network coding is shown to be NP-hard and a polynomial approximation algorithm is proposed.
Ortega-Casanova, Joaquin; Fernandez-Feria, Ramon
2015-11-01
The thrust generated by two heaving plates in tandem is analysed for two particular sets of configurations of interest in forward flight: a plunging leading plate with the trailing plate at rest, and the two plates heaving with the same frequency and amplitude, but varying the phase difference. The thrust efficiency of the leading plate is augmented in relation to a single plate heaving with the same frequency and amplitude in most cases. In the first configuration, we characterize the range of nondimensional heaving frequencies and amplitudes of the leading plate for which the stationary trailing plate contributes positively to the global thrust. The maximum global thrust efficiency, reached for an advance ratio slightly less than unity and a reduced frequency close to 5, is about the same as the maximum efficiency for an isolated plate. But for low frequencies the tandem configuration with the trailing plate at rest is more thrust efficient than the isolated plate. In the second configuration, we find that the maximum thrust efficiency is reached for a phase lag of 180o (counterstroking), particularly for an advance ratio unity and a reduced frequency 4.4, and it is practically the same as in the other configuration and that for a single plate. Supported by the Ministerio de Economía y Competitividad of Spain Grant no. DPI2013-40479-P.
Dassau, E; Atlas, E; Phillip, M
2011-02-01
Closed-loop algorithms can be found in every aspect of everyday modern life. Automation and control are used constantly to provide safety and to improve quality of life. Closed-loop systems and algorithms can be found in home appliances, automobiles, aviation and more. Can one imagine nowadays driving a car without ABS, cruise control or even anti-sliding control? Similar principles of automation and control can be used in the management of diabetes mellitus (DM). The idea of an algorithmic/technological way to control glycaemia is not new and has been researched for more than four decades. However, recent improvements in both glucose-sensing technology and insulin delivery together with advanced control and systems engineering made this dream of an artificial pancreas possible. The artificial pancreas may be the next big step in the treatment of DM since the use of insulin analogues. An artificial pancreas can be described as internal or external devices that use continuous glucose measurements to automatically manage exogenous insulin delivery with or without other hormones in an attempt to restore glucose regulation in individuals with DM using a control algorithm. This device as described can be internal or external; can use different types of control algorithms with bi-hormonal or uni-hormonal design; and can utilise different ways to administer them. The different designs and implementations have transitioned recently from in silico simulations to clinical evaluation stage with practical applications in mind. This may mark the beginning of a new era in diabetes management with the introduction of semi-closed-loop systems that can prevent or minimise nocturnal hypoglycaemia, to hybrid systems that will manage blood glucose (BG) levels with minimal user intervention to finally fully automated systems that will take the user out of the loop. More and more clinical trials will be needed for the artificial pancreas to become a reality but initial encouraging
The Wiener maximum quadratic assignment problem
Cela, Eranda; Woeginger, Gerhard J
2011-01-01
We investigate a special case of the maximum quadratic assignment problem where one matrix is a product matrix and the other matrix is the distance matrix of a one-dimensional point set. We show that this special case, which we call the Wiener maximum quadratic assignment problem, is NP-hard in the ordinary sense and solvable in pseudo-polynomial time. Our approach also yields a polynomial time solution for the following problem from chemical graph theory: Find a tree that maximizes the Wiener index among all trees with a prescribed degree sequence. This settles an open problem from the literature.
Maximum confidence measurements via probabilistic quantum cloning
Zhang Wen-Hai; Yu Long-Bao; Cao Zhuo-Liang; Ye Liu
2013-01-01
Probabilistic quantum cloning (PQC) cannot copy a set of linearly dependent quantum states.In this paper,we show that if incorrect copies are allowed to be produced,linearly dependent quantum states may also be cloned by the PQC.By exploiting this kind of PQC to clone a special set of three linearly dependent quantum states,we derive the upper bound of the maximum confidence measure of a set.An explicit transformation of the maximum confidence measure is presented.
Maximum floodflows in the conterminous United States
Crippen, John R.; Bue, Conrad D.
1977-01-01
Peak floodflows from thousands of observation sites within the conterminous United States were studied to provide a guide for estimating potential maximum floodflows. Data were selected from 883 sites with drainage areas of less than 10,000 square miles (25,900 square kilometers) and were grouped into regional sets. Outstanding floods for each region were plotted on graphs, and envelope curves were computed that offer reasonable limits for estimates of maximum floods. The curves indicate that floods may occur that are two to three times greater than those known for most streams.
Revealing the Maximum Strength in Nanotwinned Copper
Lu, L.; Chen, X.; Huang, Xiaoxu
2009-01-01
The strength of polycrystalline materials increases with decreasing grain size. Below a critical size, smaller grains might lead to softening, as suggested by atomistic simulations. The strongest size should arise at a transition in deformation mechanism from lattice dislocation activities to grain...... boundary–related processes. We investigated the maximum strength of nanotwinned copper samples with different twin thicknesses. We found that the strength increases with decreasing twin thickness, reaching a maximum at 15 nanometers, followed by a softening at smaller values that is accompanied by enhanced...
The Maximum Resource Bin Packing Problem
Boyar, J.; Epstein, L.; Favrholdt, L.M.
2006-01-01
Usually, for bin packing problems, we try to minimize the number of bins used or in the case of the dual bin packing problem, maximize the number or total size of accepted items. This paper presents results for the opposite problems, where we would like to maximize the number of bins used...... algorithms, First-Fit-Increasing and First-Fit-Decreasing for the maximum resource variant of classical bin packing. For the on-line variant, we define maximum resource variants of classical and dual bin packing. For dual bin packing, no on-line algorithm is competitive. For classical bin packing, we find...
Maximum entropy analysis of EGRET data
Pohl, M.; Strong, A.W.
1997-01-01
EGRET data are usually analysed on the basis of the Maximum-Likelihood method \\cite{ma96} in a search for point sources in excess to a model for the background radiation (e.g. \\cite{hu97}). This method depends strongly on the quality of the background model, and thus may have high systematic unce...... uncertainties in region of strong and uncertain background like the Galactic Center region. Here we show images of such regions obtained by the quantified Maximum-Entropy method. We also discuss a possible further use of MEM in the analysis of problematic regions of the sky....
Revealing the Maximum Strength in Nanotwinned Copper
Lu, L.; Chen, X.; Huang, Xiaoxu
2009-01-01
The strength of polycrystalline materials increases with decreasing grain size. Below a critical size, smaller grains might lead to softening, as suggested by atomistic simulations. The strongest size should arise at a transition in deformation mechanism from lattice dislocation activities to grain...... boundary–related processes. We investigated the maximum strength of nanotwinned copper samples with different twin thicknesses. We found that the strength increases with decreasing twin thickness, reaching a maximum at 15 nanometers, followed by a softening at smaller values that is accompanied by enhanced...
Maximum phytoplankton concentrations in the sea
Jackson, G.A.; Kiørboe, Thomas
2008-01-01
A simplification of plankton dynamics using coagulation theory provides predictions of the maximum algal concentration sustainable in aquatic systems. These predictions have previously been tested successfully against results from iron fertilization experiments. We extend the test to data collected...... in the North Atlantic as part of the Bermuda Atlantic Time Series program as well as data collected off Southern California as part of the Southern California Bight Study program. The observed maximum particulate organic carbon and volumetric particle concentrations are consistent with the predictions...
Marburger, John H
2015-01-01
In a career that included tenures as president of Stony Brook University, director of Brookhaven National Laboratory, and science advisor to President George W. Bush, John Marburger (1941 2011) found himself on the front line of battles that pulled science ever deeper into the political arena. From nuclear power to global warming and stem cell research, science controversies, he discovered, are never just about science. Science Policy Up Close" presents Marburger s reflections on the challenges science administrators face in the twenty-first century. In each phase of public service Marburger came into contact with a new dimension of science policy. The Shoreham Commission exposed him to the problem of handling a volatile public controversy over nuclear power. The Superconducting Super Collider episode gave him insights into the collision between government requirements and scientists expectations and feelings of entitlement. The Directorship of Brookhaven taught him how to talk to the public about the risks ...
Seligman, Martin E. P.; Rashid, Tayyab; Parks, Acacia C.
2006-01-01
Positive psychotherapy (PPT) contrasts with standard interventions for depression by increasing positive emotion, engagement, and meaning rather than directly targeting depressive symptoms. The authors have tested the effects of these interventions in a variety of settings. In informal student and clinical settings, people not uncommonly reported…
Oza, Nilay; Abrahamsson, Pekka; Conboy, Kieran
Agile methods are increasingly adopted by European companies. Academics too are conducting numerous studies on different tenets of agile methods. Companies often feel proud in marketing themselves as ‘agile’. However, the true notion of ‘being agile’ seems to have been overlooked due to lack of positioning of oneself for agility. This raises a call for more research and interactions between academia and the industry. The proposed workshop refers to this call. It will be highly relevant to participants, interested in positioning their company’s agility from organizational, group or project perspectives. The positioning of agility will help companies to better align their agile practices with stakeholder values. Results of the workshop will be shared across participants and they will also have opportunity to continue their work on agile positioning in their companies. At broader level, the work done in this workshop will contribute towards developing Agile Positioning System.
Analysis of Photovoltaic Maximum Power Point Trackers
Veerachary, Mummadi
The photovoltaic generator exhibits a non-linear i-v characteristic and its maximum power point (MPP) varies with solar insolation. An intermediate switch-mode dc-dc converter is required to extract maximum power from the photovoltaic array. In this paper buck, boost and buck-boost topologies are considered and a detailed mathematical analysis, both for continuous and discontinuous inductor current operation, is given for MPP operation. The conditions on the connected load values and duty ratio are derived for achieving the satisfactory maximum power point operation. Further, it is shown that certain load values, falling out of the optimal range, will drive the operating point away from the true maximum power point. Detailed comparison of various topologies for MPPT is given. Selection of the converter topology for a given loading is discussed. Detailed discussion on circuit-oriented model development is given and then MPPT effectiveness of various converter systems is verified through simulations. Proposed theory and analysis is validated through experimental investigations.
On maximum cycle packings in polyhedral graphs
Peter Recht
2014-04-01
Full Text Available This paper addresses upper and lower bounds for the cardinality of a maximum vertex-/edge-disjoint cycle packing in a polyhedral graph G. Bounds on the cardinality of such packings are provided, that depend on the size, the order or the number of faces of G, respectively. Polyhedral graphs are constructed, that attain these bounds.
Hard graphs for the maximum clique problem
Hoede, Cornelis
1988-01-01
The maximum clique problem is one of the NP-complete problems. There are graphs for which a reduction technique exists that transforms the problem for these graphs into one for graphs with specific properties in polynomial time. The resulting graphs do not grow exponentially in order and number. Gra
Maximum Likelihood Estimation of Search Costs
J.L. Moraga-Gonzalez (José Luis); M.R. Wildenbeest (Matthijs)
2006-01-01
textabstractIn a recent paper Hong and Shum (forthcoming) present a structural methodology to estimate search cost distributions. We extend their approach to the case of oligopoly and present a maximum likelihood estimate of the search cost distribution. We apply our method to a data set of online p
Weak Scale From the Maximum Entropy Principle
Hamada, Yuta; Kawana, Kiyoharu
2015-01-01
The theory of multiverse and wormholes suggests that the parameters of the Standard Model are fixed in such a way that the radiation of the $S^{3}$ universe at the final stage $S_{rad}$ becomes maximum, which we call the maximum entropy principle. Although it is difficult to confirm this principle generally, for a few parameters of the Standard Model, we can check whether $S_{rad}$ actually becomes maximum at the observed values. In this paper, we regard $S_{rad}$ at the final stage as a function of the weak scale ( the Higgs expectation value ) $v_{h}$, and show that it becomes maximum around $v_{h}={\\cal{O}}(300\\text{GeV})$ when the dimensionless couplings in the Standard Model, that is, the Higgs self coupling, the gauge couplings, and the Yukawa couplings are fixed. Roughly speaking, we find that the weak scale is given by \\begin{equation} v_{h}\\sim\\frac{T_{BBN}^{2}}{M_{pl}y_{e}^{5}},\
Weak scale from the maximum entropy principle
Hamada, Yuta; Kawai, Hikaru; Kawana, Kiyoharu
2015-03-01
The theory of the multiverse and wormholes suggests that the parameters of the Standard Model (SM) are fixed in such a way that the radiation of the S3 universe at the final stage S_rad becomes maximum, which we call the maximum entropy principle. Although it is difficult to confirm this principle generally, for a few parameters of the SM, we can check whether S_rad actually becomes maximum at the observed values. In this paper, we regard S_rad at the final stage as a function of the weak scale (the Higgs expectation value) vh, and show that it becomes maximum around vh = {{O}} (300 GeV) when the dimensionless couplings in the SM, i.e., the Higgs self-coupling, the gauge couplings, and the Yukawa couplings are fixed. Roughly speaking, we find that the weak scale is given by vh ˜ T_{BBN}2 / (M_{pl}ye5), where ye is the Yukawa coupling of electron, T_BBN is the temperature at which the Big Bang nucleosynthesis starts, and M_pl is the Planck mass.
Global characterization of the Holocene Thermal Maximum
Renssen, H.; Seppä, H.; Crosta, X.; Goosse, H.; Roche, D.M.V.A.P.
2012-01-01
We analyze the global variations in the timing and magnitude of the Holocene Thermal Maximum (HTM) and their dependence on various forcings in transient simulations covering the last 9000 years (9 ka), performed with a global atmosphere-ocean-vegetation model. In these experiments, we consider the i
Instance Optimality of the Adaptive Maximum Strategy
L. Diening; C. Kreuzer; R. Stevenson
2016-01-01
In this paper, we prove that the standard adaptive finite element method with a (modified) maximum marking strategy is instance optimal for the total error, being the square root of the squared energy error plus the squared oscillation. This result will be derived in the model setting of Poisson’s e
Maximum phonation time: variability and reliability.
Speyer, Renée; Bogaardt, Hans C A; Passos, Valéria Lima; Roodenburg, Nel P H D; Zumach, Anne; Heijnen, Mariëlle A M; Baijens, Laura W J; Fleskens, Stijn J H M; Brunings, Jan W
2010-05-01
The objective of the study was to determine maximum phonation time reliability as a function of the number of trials, days, and raters in dysphonic and control subjects. Two groups of adult subjects participated in this reliability study: a group of outpatients with functional or organic dysphonia versus a group of healthy control subjects matched by age and gender. Over a period of maximally 6 weeks, three video recordings were made of five subjects' maximum phonation time trials. A panel of five experts were responsible for all measurements, including a repeated measurement of the subjects' first recordings. Patients showed significantly shorter maximum phonation times compared with healthy controls (on average, 6.6 seconds shorter). The averaged interclass correlation coefficient (ICC) over all raters per trial for the first day was 0.998. The averaged reliability coefficient per rater and per trial for repeated measurements of the first day's data was 0.997, indicating high intrarater reliability. The mean reliability coefficient per day for one trial was 0.939. When using five trials, the reliability increased to 0.987. The reliability over five trials for a single day was 0.836; for 2 days, 0.911; and for 3 days, 0.935. To conclude, the maximum phonation time has proven to be a highly reliable measure in voice assessment. A single rater is sufficient to provide highly reliable measurements.
Maximum Phonation Time: Variability and Reliability
R. Speyer; H.C.A. Bogaardt; V.L. Passos; N.P.H.D. Roodenburg; A. Zumach; M.A.M. Heijnen; L.W.J. Baijens; S.J.H.M. Fleskens; J.W. Brunings
2010-01-01
The objective of the study was to determine maximum phonation time reliability as a function of the number of trials, days, and raters in dysphonic and control subjects. Two groups of adult subjects participated in this reliability study: a group of outpatients with functional or organic dysphonia v
Maximum likelihood estimation of fractionally cointegrated systems
Lasak, Katarzyna
In this paper we consider a fractionally cointegrated error correction model and investigate asymptotic properties of the maximum likelihood (ML) estimators of the matrix of the cointe- gration relations, the degree of fractional cointegration, the matrix of the speed of adjustment...
Maximum likelihood estimation for integrated diffusion processes
Baltazar-Larios, Fernando; Sørensen, Michael
EM-algorithm to obtain maximum likelihood estimates of the parameters in the diffusion model. As part of the algorithm, we use a recent simple method for approximate simulation of diffusion bridges. In simulation studies for the Ornstein-Uhlenbeck process and the CIR process the proposed method works...
Maximum gain of Yagi-Uda arrays
Bojsen, J.H.; Schjær-Jacobsen, Hans; Nilsson, E.
1971-01-01
Numerical optimisation techniques have been used to find the maximum gain of some specific parasitic arrays. The gain of an array of infinitely thin, equispaced dipoles loaded with arbitrary reactances has been optimised. The results show that standard travelling-wave design methods are not optimum....... Yagi–Uda arrays with equal and unequal spacing have also been optimised with experimental verification....
The maximum intelligible range of the human voice
Boren, Braxton
This dissertation examines the acoustics of the spoken voice at high levels and the maximum number of people that could hear such a voice unamplified in the open air. In particular, it examines an early auditory experiment by Benjamin Franklin which sought to determine the maximum intelligible crowd for the Anglican preacher George Whitefield in the eighteenth century. Using Franklin's description of the experiment and a noise source on Front Street, the geometry and diffraction effects of such a noise source are examined to more precisely pinpoint Franklin's position when Whitefield's voice ceased to be intelligible. Based on historical maps, drawings, and prints, the geometry and material of Market Street is constructed as a computer model which is then used to construct an acoustic cone tracing model. Based on minimal values of the Speech Transmission Index (STI) at Franklin's position, Whitefield's on-axis Sound Pressure Level (SPL) at 1 m is determined, leading to estimates centering around 90 dBA. Recordings are carried out on trained actors and singers to determine their maximum time-averaged SPL at 1 m. This suggests that the greatest average SPL achievable by the human voice is 90-91 dBA, similar to the median estimates for Whitefield's voice. The sites of Whitefield's largest crowds are acoustically modeled based on historical evidence and maps. Based on Whitefield's SPL, the minimal STI value, and the crowd's background noise, this allows a prediction of the minimally intelligible area for each site. These yield maximum crowd estimates of 50,000 under ideal conditions, while crowds of 20,000 to 30,000 seem more reasonable when the crowd was reasonably quiet and Whitefield's voice was near 90 dBA.
Mørck, Line Lerche; Khawaja, Iram
2009-01-01
abstract This article focuses on the complex and multi-layered process of researcher positioning, specifically in relation to the politically sensitive study of marginalised and ‘othered' groups such as Muslims living in Denmark. We discuss the impact of different ethnic, religious and racial...... political and personal involvement by the researcher, which challenges traditional perspectives on research and researcher positioning. A key point in this regard is the importance of constant awareness of and reflection on the multiple ways in which one's positioning as a researcher influences the research...
Domoshnitsky Alexander
2009-01-01
Full Text Available We obtain the maximum principles for the first-order neutral functional differential equation where , and are linear continuous operators, and are positive operators, is the space of continuous functions, and is the space of essentially bounded functions defined on . New tests on positivity of the Cauchy function and its derivative are proposed. Results on existence and uniqueness of solutions for various boundary value problems are obtained on the basis of the maximum principles.
Forecasting ozone daily maximum levels at Santiago, Chile
Jorquera, Héctor; Pérez, Ricardo; Cipriano, Aldo; Espejo, Andrés; Victoria Letelier, M.; Acuña, Gonzalo
In major urban areas, air pollution impact on health is serious enough to include it in the group of meteorological variables that are forecast daily. This work focusses on the comparison of different forecasting systems for daily maximum ozone levels at Santiago, Chile. The modelling tools used for these systems were linear time series, artificial neural networks and fuzzy models. The structure of the forecasting model was derived from basic principles and it includes a combination of persistence and daily maximum air temperature as input variables. Assessment of the models is based on two indices: their ability to forecast well an episode, and their tendency to forecast an episode that did not occur at the end (a false positive). All the models tried in this work showed good forecasting performance, with 70-95% of successful forecasts at two monitor sites: Downtown (moderate impacts) and Eastern (downwind, highest impacts). The number of false positives was not negligible, but this may be improved by expressing the forecast in broad classes: low, average, high, very high impacts; the fuzzy model was the most reliable forecast, with the lowest number of false positives among the different models evaluated. The quality of the results and the dynamics of ozone formation suggest the use of a forecast to warn people about excessive exposure during episodic days at Santiago.
Ho, Wai-Yew; Choo, Quok-Cheong; Chew, Choy-Hoong
2017-03-01
We investigated the epidemiology and clonality of 175 nonrepetitive methicillin-resistant Staphylococcus aureus (MRSA) isolates from clinical specimens collected between 2011 and 2012 in Kinta Valley in Malaysia. Molecular tools such as polymerase chain reaction, pulsed-field gel electrophoresis, and staphylococcal protein A (spa) typing were used. Our study revealed the predominance of three closely related ermA(+) SCCmec type III pulsotypes belonging to spa type t037 (Brazilian-Hungarian clone), which were deficient in the locus F, but positive for the ccrC gene in majority (65.7%) of the MRSA infections in this region. The first evidence of SCCmec type II MRSA in the country, belonging to spa type t2460, was also noted. Although the carriage of pvl gene was uncommon (8.6%) and mostly confined to either SCCmec type IV or SCCmec type V isolates, most of these isolates belonged to spa types t345 or t657, which are associated with the Bengal-Bay CA-MRSA clone. Interestingly, spa t304 and t690 SCCmec type IV pvl(+) were also detected among the MRSA isolates. Data from this study show the rise of uncommon clones among MRSA isolates in Malaysia.
Solar maximum mission panel jettison analysis remote manipulator system
Bauer, R. B.
1980-01-01
A study is presented of the development of the Remote Manipulator System (RMS) configurations for jettison of the solar panels on the Solar Maximum Mission/Multimission Satellite. A valid RMS maneuver between jettison configurations was developed. Arm and longeron loads and effector excursions due to the solar panel jettison were determined to see if they were within acceptable limits. These loads and end effector excursions were analyzed under two RMS modes, servos active in position hold submode, and in the brakes on mode.
Speech processing using maximum likelihood continuity mapping
Hogden, John E. (Santa Fe, NM)
2000-01-01
Speech processing is obtained that, given a probabilistic mapping between static speech sounds and pseudo-articulator positions, allows sequences of speech sounds to be mapped to smooth sequences of pseudo-articulator positions. In addition, a method for learning a probabilistic mapping between static speech sounds and pseudo-articulator position is described. The method for learning the mapping between static speech sounds and pseudo-articulator position uses a set of training data composed only of speech sounds. The said speech processing can be applied to various speech analysis tasks, including speech recognition, speaker recognition, speech coding, speech synthesis, and voice mimicry.
Speech processing using maximum likelihood continuity mapping
Hogden, J.E.
2000-04-18
Speech processing is obtained that, given a probabilistic mapping between static speech sounds and pseudo-articulator positions, allows sequences of speech sounds to be mapped to smooth sequences of pseudo-articulator positions. In addition, a method for learning a probabilistic mapping between static speech sounds and pseudo-articulator position is described. The method for learning the mapping between static speech sounds and pseudo-articulator position uses a set of training data composed only of speech sounds. The said speech processing can be applied to various speech analysis tasks, including speech recognition, speaker recognition, speech coding, speech synthesis, and voice mimicry.
2007-11-01
Today, a new ALMA outreach and educational book was publicly presented to city officials of San Pedro de Atacama in Chile, as part of the celebrations of the anniversary of the Andean village. ESO PR Photo 50a/07 ESO PR Photo 50a/07 A Useful Tool for Schools Entitled "Close to the sky: Biological heritage in the ALMA area", and edited in English and Spanish by ESO in Chile, the book collects unique on-site observations of the flora and fauna of the ALMA region performed by experts commissioned to investigate it and to provide key initiatives to protect it. "I thank the ALMA project for providing us a book that will surely be a good support for the education of children and youngsters of San Pedro de Atacama. Thanks to this publication, we expect our rich flora and fauna to be better known. I invite teachers and students to take advantage of this educational resource, which will be available in our schools", commented Ms. Sandra Berna, the Mayor of San Pedro de Atacama, who was given the book by representatives of the ALMA global collaboration project. Copies of the book 'Close to the sky' will be donated to all schools in the area, as a contribution to the education of students and young people in northern Chile. "From the very beginning of the project, ALMA construction has had a firm commitment to environment and local culture, protecting unique flora and fauna species and preserving old estancias belonging to the Likan Antai culture," said Jacques Lassalle, who represented ALMA at the hand-over. "Animals like the llama, the fox or the condor do not only live in the region where ALMA is now being built, but they are also key elements of the ancient Andean constellations. In this sense they are part of the same sky that will be explored by ALMA in the near future." ESO PR Photo 50c/07 ESO PR Photo 50c/07 Presentation of the ALMA book The ALMA Project is a giant, international observatory currently under construction on the high-altitude Chajnantor site in Chile
Model Selection Through Sparse Maximum Likelihood Estimation
Banerjee, Onureena; D'Aspremont, Alexandre
2007-01-01
We consider the problem of estimating the parameters of a Gaussian or binary distribution in such a way that the resulting undirected graphical model is sparse. Our approach is to solve a maximum likelihood problem with an added l_1-norm penalty term. The problem as formulated is convex but the memory requirements and complexity of existing interior point methods are prohibitive for problems with more than tens of nodes. We present two new algorithms for solving problems with at least a thousand nodes in the Gaussian case. Our first algorithm uses block coordinate descent, and can be interpreted as recursive l_1-norm penalized regression. Our second algorithm, based on Nesterov's first order method, yields a complexity estimate with a better dependence on problem size than existing interior point methods. Using a log determinant relaxation of the log partition function (Wainwright & Jordan (2006)), we show that these same algorithms can be used to solve an approximate sparse maximum likelihood problem for...
Maximum-entropy description of animal movement.
Fleming, Chris H; Subaşı, Yiğit; Calabrese, Justin M
2015-03-01
We introduce a class of maximum-entropy states that naturally includes within it all of the major continuous-time stochastic processes that have been applied to animal movement, including Brownian motion, Ornstein-Uhlenbeck motion, integrated Ornstein-Uhlenbeck motion, a recently discovered hybrid of the previous models, and a new model that describes central-place foraging. We are also able to predict a further hierarchy of new models that will emerge as data quality improves to better resolve the underlying continuity of animal movement. Finally, we also show that Langevin equations must obey a fluctuation-dissipation theorem to generate processes that fall from this class of maximum-entropy distributions when the constraints are purely kinematic.
Pareto versus lognormal: a maximum entropy test.
Bee, Marco; Riccaboni, Massimo; Schiavo, Stefano
2011-08-01
It is commonly found that distributions that seem to be lognormal over a broad range change to a power-law (Pareto) distribution for the last few percentiles. The distributions of many physical, natural, and social events (earthquake size, species abundance, income and wealth, as well as file, city, and firm sizes) display this structure. We present a test for the occurrence of power-law tails in statistical distributions based on maximum entropy. This methodology allows one to identify the true data-generating processes even in the case when it is neither lognormal nor Pareto. The maximum entropy approach is then compared with other widely used methods and applied to different levels of aggregation of complex systems. Our results provide support for the theory that distributions with lognormal body and Pareto tail can be generated as mixtures of lognormally distributed units.
Maximum Variance Hashing via Column Generation
Lei Luo
2013-01-01
item search. Recently, a number of data-dependent methods have been developed, reflecting the great potential of learning for hashing. Inspired by the classic nonlinear dimensionality reduction algorithm—maximum variance unfolding, we propose a novel unsupervised hashing method, named maximum variance hashing, in this work. The idea is to maximize the total variance of the hash codes while preserving the local structure of the training data. To solve the derived optimization problem, we propose a column generation algorithm, which directly learns the binary-valued hash functions. We then extend it using anchor graphs to reduce the computational cost. Experiments on large-scale image datasets demonstrate that the proposed method outperforms state-of-the-art hashing methods in many cases.
The Maximum Resource Bin Packing Problem
Boyar, J.; Epstein, L.; Favrholdt, L.M.
2006-01-01
algorithms, First-Fit-Increasing and First-Fit-Decreasing for the maximum resource variant of classical bin packing. For the on-line variant, we define maximum resource variants of classical and dual bin packing. For dual bin packing, no on-line algorithm is competitive. For classical bin packing, we find......Usually, for bin packing problems, we try to minimize the number of bins used or in the case of the dual bin packing problem, maximize the number or total size of accepted items. This paper presents results for the opposite problems, where we would like to maximize the number of bins used...... the competitive ratio of various natural algorithms. We study the general versions of the problems as well as the parameterized versions where there is an upper bound of on the item sizes, for some integer k....
Nonparametric Maximum Entropy Estimation on Information Diagrams
Martin, Elliot A; Meinke, Alexander; Děchtěrenko, Filip; Davidsen, Jörn
2016-01-01
Maximum entropy estimation is of broad interest for inferring properties of systems across many different disciplines. In this work, we significantly extend a technique we previously introduced for estimating the maximum entropy of a set of random discrete variables when conditioning on bivariate mutual informations and univariate entropies. Specifically, we show how to apply the concept to continuous random variables and vastly expand the types of information-theoretic quantities one can condition on. This allows us to establish a number of significant advantages of our approach over existing ones. Not only does our method perform favorably in the undersampled regime, where existing methods fail, but it also can be dramatically less computationally expensive as the cardinality of the variables increases. In addition, we propose a nonparametric formulation of connected informations and give an illustrative example showing how this agrees with the existing parametric formulation in cases of interest. We furthe...
Zipf's law, power laws and maximum entropy
Visser, Matt
2013-04-01
Zipf's law, and power laws in general, have attracted and continue to attract considerable attention in a wide variety of disciplines—from astronomy to demographics to software structure to economics to linguistics to zoology, and even warfare. A recent model of random group formation (RGF) attempts a general explanation of such phenomena based on Jaynes' notion of maximum entropy applied to a particular choice of cost function. In the present paper I argue that the specific cost function used in the RGF model is in fact unnecessarily complicated, and that power laws can be obtained in a much simpler way by applying maximum entropy ideas directly to the Shannon entropy subject only to a single constraint: that the average of the logarithm of the observable quantity is specified.
Zipf's law, power laws, and maximum entropy
Visser, Matt
2012-01-01
Zipf's law, and power laws in general, have attracted and continue to attract considerable attention in a wide variety of disciplines - from astronomy to demographics to economics to linguistics to zoology, and even warfare. A recent model of random group formation [RGF] attempts a general explanation of such phenomena based on Jaynes' notion of maximum entropy applied to a particular choice of cost function. In the present article I argue that the cost function used in the RGF model is in fact unnecessarily complicated, and that power laws can be obtained in a much simpler way by applying maximum entropy ideas directly to the Shannon entropy subject only to a single constraint: that the average of the logarithm of the observable quantity is specified.
Regions of constrained maximum likelihood parameter identifiability
Lee, C.-H.; Herget, C. J.
1975-01-01
This paper considers the parameter identification problem of general discrete-time, nonlinear, multiple-input/multiple-output dynamic systems with Gaussian-white distributed measurement errors. Knowledge of the system parameterization is assumed to be known. Regions of constrained maximum likelihood (CML) parameter identifiability are established. A computation procedure employing interval arithmetic is proposed for finding explicit regions of parameter identifiability for the case of linear systems. It is shown that if the vector of true parameters is locally CML identifiable, then with probability one, the vector of true parameters is a unique maximal point of the maximum likelihood function in the region of parameter identifiability and the CML estimation sequence will converge to the true parameters.
A Maximum Radius for Habitable Planets.
Alibert, Yann
2015-09-01
We compute the maximum radius a planet can have in order to fulfill two constraints that are likely necessary conditions for habitability: 1- surface temperature and pressure compatible with the existence of liquid water, and 2- no ice layer at the bottom of a putative global ocean, that would prevent the operation of the geologic carbon cycle to operate. We demonstrate that, above a given radius, these two constraints cannot be met: in the Super-Earth mass range (1-12 Mearth), the overall maximum that a planet can have varies between 1.8 and 2.3 Rearth. This radius is reduced when considering planets with higher Fe/Si ratios, and taking into account irradiation effects on the structure of the gas envelope.
Maximum Profit Configurations of Commercial Engines
Yiran Chen
2011-01-01
An investigation of commercial engines with finite capacity low- and high-price economic subsystems and a generalized commodity transfer law [n ∝ Δ (P m)] in commodity flow processes, in which effects of the price elasticities of supply and demand are introduced, is presented in this paper. Optimal cycle configurations of commercial engines for maximum profit are obtained by applying optimal control theory. In some special cases, the eventual state—market equilibrium—is solely determined by t...
A stochastic maximum principle via Malliavin calculus
Øksendal, Bernt; Zhou, Xun Yu; Meyer-Brandis, Thilo
2008-01-01
This paper considers a controlled It\\^o-L\\'evy process where the information available to the controller is possibly less than the overall information. All the system coefficients and the objective performance functional are allowed to be random, possibly non-Markovian. Malliavin calculus is employed to derive a maximum principle for the optimal control of such a system where the adjoint process is explicitly expressed.
Tissue radiation response with maximum Tsallis entropy.
Sotolongo-Grau, O; Rodríguez-Pérez, D; Antoranz, J C; Sotolongo-Costa, Oscar
2010-10-08
The expression of survival factors for radiation damaged cells is currently based on probabilistic assumptions and experimentally fitted for each tumor, radiation, and conditions. Here, we show how the simplest of these radiobiological models can be derived from the maximum entropy principle of the classical Boltzmann-Gibbs expression. We extend this derivation using the Tsallis entropy and a cutoff hypothesis, motivated by clinical observations. The obtained expression shows a remarkable agreement with the experimental data found in the literature.
Maximum Estrada Index of Bicyclic Graphs
Wang, Long; Wang, Yi
2012-01-01
Let $G$ be a simple graph of order $n$, let $\\lambda_1(G),\\lambda_2(G),...,\\lambda_n(G)$ be the eigenvalues of the adjacency matrix of $G$. The Esrada index of $G$ is defined as $EE(G)=\\sum_{i=1}^{n}e^{\\lambda_i(G)}$. In this paper we determine the unique graph with maximum Estrada index among bicyclic graphs with fixed order.
Maximum privacy without coherence, zero-error
Leung, Debbie; Yu, Nengkun
2016-09-01
We study the possible difference between the quantum and the private capacities of a quantum channel in the zero-error setting. For a family of channels introduced by Leung et al. [Phys. Rev. Lett. 113, 030512 (2014)], we demonstrate an extreme difference: the zero-error quantum capacity is zero, whereas the zero-error private capacity is maximum given the quantum output dimension.
Closed suction drain with bulb
... page: //medlineplus.gov/ency/patientinstructions/000039.htm Closed suction drain with bulb To use the sharing features on this page, please enable JavaScript. A closed suction drain is used to remove fluids that build ...
Automatic maximum entropy spectral reconstruction in NMR.
Mobli, Mehdi; Maciejewski, Mark W; Gryk, Michael R; Hoch, Jeffrey C
2007-10-01
Developments in superconducting magnets, cryogenic probes, isotope labeling strategies, and sophisticated pulse sequences together have enabled the application, in principle, of high-resolution NMR spectroscopy to biomolecular systems approaching 1 megadalton. In practice, however, conventional approaches to NMR that utilize the fast Fourier transform, which require data collected at uniform time intervals, result in prohibitively lengthy data collection times in order to achieve the full resolution afforded by high field magnets. A variety of approaches that involve nonuniform sampling have been proposed, each utilizing a non-Fourier method of spectrum analysis. A very general non-Fourier method that is capable of utilizing data collected using any of the proposed nonuniform sampling strategies is maximum entropy reconstruction. A limiting factor in the adoption of maximum entropy reconstruction in NMR has been the need to specify non-intuitive parameters. Here we describe a fully automated system for maximum entropy reconstruction that requires no user-specified parameters. A web-accessible script generator provides the user interface to the system.
Maximum entropy analysis of cosmic ray composition
Nosek, Dalibor; Vícha, Jakub; Trávníček, Petr; Nosková, Jana
2016-01-01
We focus on the primary composition of cosmic rays with the highest energies that cause extensive air showers in the Earth's atmosphere. A way of examining the two lowest order moments of the sample distribution of the depth of shower maximum is presented. The aim is to show that useful information about the composition of the primary beam can be inferred with limited knowledge we have about processes underlying these observations. In order to describe how the moments of the depth of shower maximum depend on the type of primary particles and their energies, we utilize a superposition model. Using the principle of maximum entropy, we are able to determine what trends in the primary composition are consistent with the input data, while relying on a limited amount of information from shower physics. Some capabilities and limitations of the proposed method are discussed. In order to achieve a realistic description of the primary mass composition, we pay special attention to the choice of the parameters of the sup...
A Maximum Resonant Set of Polyomino Graphs
Zhang Heping
2016-05-01
Full Text Available A polyomino graph P is a connected finite subgraph of the infinite plane grid such that each finite face is surrounded by a regular square of side length one and each edge belongs to at least one square. A dimer covering of P corresponds to a perfect matching. Different dimer coverings can interact via an alternating cycle (or square with respect to them. A set of disjoint squares of P is a resonant set if P has a perfect matching M so that each one of those squares is M-alternating. In this paper, we show that if K is a maximum resonant set of P, then P − K has a unique perfect matching. We further prove that the maximum forcing number of a polyomino graph is equal to the cardinality of a maximum resonant set. This confirms a conjecture of Xu et al. [26]. We also show that if K is a maximal alternating set of P, then P − K has a unique perfect matching.
The maximum rate of mammal evolution
Evans, Alistair R.; Jones, David; Boyer, Alison G.; Brown, James H.; Costa, Daniel P.; Ernest, S. K. Morgan; Fitzgerald, Erich M. G.; Fortelius, Mikael; Gittleman, John L.; Hamilton, Marcus J.; Harding, Larisa E.; Lintulaakso, Kari; Lyons, S. Kathleen; Okie, Jordan G.; Saarinen, Juha J.; Sibly, Richard M.; Smith, Felisa A.; Stephens, Patrick R.; Theodor, Jessica M.; Uhen, Mark D.
2012-03-01
How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous-Paleogene (K-Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes.
Maximum saliency bias in binocular fusion
Lu, Yuhao; Stafford, Tom; Fox, Charles
2016-07-01
Subjective experience at any instant consists of a single ("unitary"), coherent interpretation of sense data rather than a "Bayesian blur" of alternatives. However, computation of Bayes-optimal actions has no role for unitary perception, instead being required to integrate over every possible action-percept pair to maximise expected utility. So what is the role of unitary coherent percepts, and how are they computed? Recent work provided objective evidence for non-Bayes-optimal, unitary coherent, perception and action in humans; and further suggested that the percept selected is not the maximum a posteriori percept but is instead affected by utility. The present study uses a binocular fusion task first to reproduce the same effect in a new domain, and second, to test multiple hypotheses about exactly how utility may affect the percept. After accounting for high experimental noise, it finds that both Bayes optimality (maximise expected utility) and the previously proposed maximum-utility hypothesis are outperformed in fitting the data by a modified maximum-salience hypothesis, using unsigned utility magnitudes in place of signed utilities in the bias function.
The maximum rate of mammal evolution
Evans, Alistair R.; Jones, David; Boyer, Alison G.; Brown, James H.; Costa, Daniel P.; Ernest, S. K. Morgan; Fitzgerald, Erich M. G.; Fortelius, Mikael; Gittleman, John L.; Hamilton, Marcus J.; Harding, Larisa E.; Lintulaakso, Kari; Lyons, S. Kathleen; Okie, Jordan G.; Saarinen, Juha J.; Sibly, Richard M.; Smith, Felisa A.; Stephens, Patrick R.; Theodor, Jessica M.; Uhen, Mark D.
2012-01-01
How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous–Paleogene (K–Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes. PMID:22308461
The maximum rate of mammal evolution.
Evans, Alistair R; Jones, David; Boyer, Alison G; Brown, James H; Costa, Daniel P; Ernest, S K Morgan; Fitzgerald, Erich M G; Fortelius, Mikael; Gittleman, John L; Hamilton, Marcus J; Harding, Larisa E; Lintulaakso, Kari; Lyons, S Kathleen; Okie, Jordan G; Saarinen, Juha J; Sibly, Richard M; Smith, Felisa A; Stephens, Patrick R; Theodor, Jessica M; Uhen, Mark D
2012-03-13
How fast can a mammal evolve from the size of a mouse to the size of an elephant? Achieving such a large transformation calls for major biological reorganization. Thus, the speed at which this occurs has important implications for extensive faunal changes, including adaptive radiations and recovery from mass extinctions. To quantify the pace of large-scale evolution we developed a metric, clade maximum rate, which represents the maximum evolutionary rate of a trait within a clade. We applied this metric to body mass evolution in mammals over the last 70 million years, during which multiple large evolutionary transitions occurred in oceans and on continents and islands. Our computations suggest that it took a minimum of 1.6, 5.1, and 10 million generations for terrestrial mammal mass to increase 100-, and 1,000-, and 5,000-fold, respectively. Values for whales were down to half the length (i.e., 1.1, 3, and 5 million generations), perhaps due to the reduced mechanical constraints of living in an aquatic environment. When differences in generation time are considered, we find an exponential increase in maximum mammal body mass during the 35 million years following the Cretaceous-Paleogene (K-Pg) extinction event. Our results also indicate a basic asymmetry in macroevolution: very large decreases (such as extreme insular dwarfism) can happen at more than 10 times the rate of increases. Our findings allow more rigorous comparisons of microevolutionary and macroevolutionary patterns and processes.
Optimal specific wavelength for maximum thrust production in undulatory propulsion.
Nangia, Nishant; Bale, Rahul; Chen, Nelson; Hanna, Yohanna; Patankar, Neelesh A
2017-01-01
What wavelengths do undulatory swimmers use during propulsion? In this work we find that a wide range of body/caudal fin (BCF) swimmers, from larval zebrafish and herring to fully-grown eels, use specific wavelength (ratio of wavelength to tail amplitude of undulation) values that fall within a relatively narrow range. The possible emergence of this constraint is interrogated using numerical simulations of fluid-structure interaction. Based on these, it was found that there is an optimal specific wavelength (OSW) that maximizes the swimming speed and thrust generated by an undulatory swimmer. The observed values of specific wavelength for BCF animals are relatively close to this OSW. The mechanisms underlying the maximum propulsive thrust for BCF swimmers are quantified and are found to be consistent with the mechanisms hypothesized in prior work. The adherence to an optimal value of specific wavelength in most natural hydrodynamic propulsors gives rise to empirical design criteria for man-made propulsors.
Semiclassical decay of strings with maximum angular momentum
Iengo, R; Iengo, Roberto; Russo, Jorge G.
2003-01-01
A highly excited (closed or open) string state on the leading Regge trajectory can be represented by a rotating soliton solution. There is a semiclassical probability per unit cycle that this string can spontaneously break into two pieces. Here we find the resulting solutions for the outgoing two pieces, which describe two specific excited string states, and show that this semiclassical picture reproduces very accurately the features of the quantum calculation of decay in the large mass M limit. In particular, this picture prescribes the precise analytical relation of the masses M_1 and M_2 of the decay products, and indicates that the lifetime of these string states grows with the mass as T= const. a' M, in agreement with the quantum calculation. Thus, surprisingly, a string with maximum angular momentum becomes more stable for larger masses. We also point out some interesting features of the evolution after the splitting process.
Hefetz, Dan; Stojaković, Miloš; Szabó, Tibor
2014-01-01
This text serves as a thorough introduction to the rapidly developing field of positional games. This area constitutes an important branch of combinatorics, whose aim it is to systematically develop an extensive mathematical basis for a variety of two-player perfect information games. These range from such popular games as Tic-Tac-Toe and Hex to purely abstract games played on graphs and hypergraphs. The subject of positional games is strongly related to several other branches of combinatorics such as Ramsey theory, extremal graph and set theory, and the probabilistic method. These notes cover a variety of topics in positional games, including both classical results and recent important developments. They are presented in an accessible way and are accompanied by exercises of varying difficulty, helping the reader to better understand the theory. The text will benefit both researchers and graduate students in combinatorics and adjacent fields.
A maximum power point tracking algorithm for photovoltaic applications
Nelatury, Sudarshan R.; Gray, Robert
2013-05-01
The voltage and current characteristic of a photovoltaic (PV) cell is highly nonlinear and operating a PV cell for maximum power transfer has been a challenge for a long time. Several techniques have been proposed to estimate and track the maximum power point (MPP) in order to improve the overall efficiency of a PV panel. A strategic use of the mean value theorem permits obtaining an analytical expression for a point that lies in a close neighborhood of the true MPP. But hitherto, an exact solution in closed form for the MPP is not published. This problem can be formulated analytically as a constrained optimization, which can be solved using the Lagrange method. This method results in a system of simultaneous nonlinear equations. Solving them directly is quite difficult. However, we can employ a recursive algorithm to yield a reasonably good solution. In graphical terms, suppose the voltage current characteristic and the constant power contours are plotted on the same voltage current plane, the point of tangency between the device characteristic and the constant power contours is the sought for MPP. It is subject to change with the incident irradiation and temperature and hence the algorithm that attempts to maintain the MPP should be adaptive in nature and is supposed to have fast convergence and the least misadjustment. There are two parts in its implementation. First, one needs to estimate the MPP. The second task is to have a DC-DC converter to match the given load to the MPP thus obtained. Availability of power electronics circuits made it possible to design efficient converters. In this paper although we do not show the results from a real circuit, we use MATLAB to obtain the MPP and a buck-boost converter to match the load. Under varying conditions of load resistance and irradiance we demonstrate MPP tracking in case of a commercially available solar panel MSX-60. The power electronics circuit is simulated by PSIM software.
Mitigation of maximum world oil production: Shortage scenarios
Hirsch, Robert L. [Management Information Services, Inc., 723 Fords Landing Way, Alexandria, VA 22314 (United States)
2008-02-15
A framework is developed for planning the mitigation of the oil shortages that will be caused by world oil production reaching a maximum and going into decline. To estimate potential economic impacts, a reasonable relationship between percent decline in world oil supply and percent decline in world GDP was determined to be roughly 1:1. As a limiting case for decline rates, giant fields were examined. Actual oil production from Europe and North America indicated significant periods of relatively flat oil production (plateaus). However, before entering its plateau period, North American oil production went through a sharp peak and steep decline. Examination of a number of future world oil production forecasts showed multi-year rollover/roll-down periods, which represent pseudoplateaus. Consideration of resource nationalism posits an Oil Exporter Withholding Scenario, which could potentially overwhelm all other considerations. Three scenarios for mitigation planning resulted from this analysis: (1) A Best Case, where maximum world oil production is followed by a multi-year plateau before the onset of a monatomic decline rate of 2-5% per year; (2) A Middling Case, where world oil production reaches a maximum, after which it drops into a long-term, 2-5% monotonic annual decline; and finally (3) A Worst Case, where the sharp peak of the Middling Case is degraded by oil exporter withholding, leading to world oil shortages growing potentially more rapidly than 2-5% per year, creating the most dire world economic impacts. (author)
Maximum Work of Free-Piston Stirling Engine Generators
Kojima, Shinji
2017-04-01
Using the method of adjoint equations described in Ref. [1], we have calculated the maximum thermal efficiencies that are theoretically attainable by free-piston Stirling and Carnot engine generators by considering the work loss due to friction and Joule heat. The net work done by the Carnot cycle is negative even when the duration of heat addition is optimized to give the maximum amount of heat addition, which is the same situation for the Brayton cycle described in our previous paper. For the Stirling cycle, the net work done is positive, and the thermal efficiency is greater than that of the Otto cycle described in our previous paper by a factor of about 2.7-1.4 for compression ratios of 5-30. The Stirling cycle is much better than the Otto, Brayton, and Carnot cycles. We have found that the optimized piston trajectories of the isothermal, isobaric, and adiabatic processes are the same when the compression ratio and the maximum volume of the same working fluid of the three processes are the same, which has facilitated the present analysis because the optimized piston trajectories of the Carnot and Stirling cycles are the same as those of the Brayton and Otto cycles, respectively.
Closing photoconductive semiconductor switches
Loubriel, G.M.; Zutavern, F.J.; Hjalmarson, H.P.; O' Malley, M.W.
1989-01-01
One of the most important limitations of Photoconductive Semiconductor Switches (PCSS) for pulsed power applications is the high laser powers required to activate the switches. In this paper, we discuss recent developments on two different aspects of GaAs PCSS that result in reductions in laser power by a factor of nearly 1000. The advantages of using GaAs over Si are many. First of all, the resistivity of GaAs can be orders of magnitude higher than that of the highest resistivity Si material, thus allowing GaAs switches to withstand dc voltages without thermal runaway. Secondly, GaAs has a higher carrier mobility than Si and, thus, is more efficient (per carrier). Finally, GaAs switches can have naturally fast (ns) opening times at room temperature and low fields, microsecond opening times at liquid nitrogen temperature of 77 K, or, on demand, closing and opening at high fields and room temperature by a mechanism called lock-on (see Ref. 1). By contrast, Si switches typically opening times of milliseconds. The amount of laser light required to trigger GaAs for lock-on, or at 77 K, is about three orders of magnitude lower than at room temperature. In this paper we describe the study of lock-on in GaAs and InP, as well as switching of GaAs at 77 K. We shall show that when GaAs is switched at 77 K, the carrier lifetime is about three orders of magnitude longer than it is at room temperature. We shall explain the change in lifetime in terms of the change in electron capture cross section of the deep levels in GaAs (these are defect or impurity levels in the band gap). In the second section, we describe the lock-on effect, now seen in GaAs and InP, and at fields as high as 70 kV/cm. We show how lock-on can be tailored by changing the GaAs temperature or by neutron bombardment. In the third section, we discuss possible lock-on mechanisms. 5 refs., 5 figs.
Khawaja, Iram; Mørck, Line Lerche
2009-01-01
This article focuses on the complex and multilayered process of researcher positioning,specifically in relation to the politically sensitive study of marginalised and "othered"groups such as Muslims living in Denmark. We discuss the impact of different ethnic,religious, and racial backgrounds...... involvement by the researcher, which challenges traditional perspectives onresearch and researcher positioning. A key point in this regard is the importance ofconstant awareness of and reflection on the multiple ways in which one's positioningas a researcher influences the research process. Studying the other...
Heidbuchel, Hein; Papadakis, Michael; Panhuyzen-Goedkoop, Nicole
2013-01-01
Sports cardiology is a new and rapidly evolving subspecialty. It aims to elucidate the cardiovascular effects of regular exercise and delineate its benefits and risks, so that safe guidance can be provided to all individuals engaging in sports and/or physical activity in order to attain the maximum...... potential benefit at the lowest possible risk. The European Society of Cardiology (ESC) advocates systematic preparticipation cardiovascular screening in an effort to identify competitive athletes at risk of exercise-related cardiovascular events and sudden cardiac death. However, the implementation...... of preparticipation screening is hindered because of lack of structured training and as a result lack of sufficient expertise in the field of sports cardiology. In 2008 the European Society of Cardiology published a core curriculum for the general cardiologist, in which sports cardiology was incorporated within...
Arbutina Bojan
2011-01-01
Full Text Available AM CVn-type stars and ultra-compact X-ray binaries are extremely interesting semi-detached close binary systems in which the Roche lobe filling component is a white dwarf transferring mass to another white dwarf, neutron star or a black hole. Earlier theoretical considerations show that there is a maximum mass ratio of AM CVn-type binary systems (qmax ≈ 2/3 below which the mass transfer is stable. In this paper we derive slightly different value for qmax and more interestingly, by applying the same procedure, we find the maximum expected white dwarf mass in ultra-compact X-ray binaries.
Maximum Bipartite Matching Size And Application to Cuckoo Hashing
Kanizo, Yossi; Keslassy, Isaac
2010-01-01
Cuckoo hashing with a stash is a robust high-performance hashing scheme that can be used in many real-life applications. It complements cuckoo hashing by adding a small stash storing the elements that cannot fit into the main hash table due to collisions. However, the exact required size of the stash and the tradeoff between its size and the memory over-provisioning of the hash table are still unknown. We settle this question by investigating the equivalent maximum matching size of a random bipartite graph, with a constant left-side vertex degree $d=2$. Specifically, we provide an exact expression for the expected maximum matching size and show that its actual size is close to its mean, with high probability. This result relies on decomposing the bipartite graph into connected components, and then separately evaluating the distribution of the matching size in each of these components. In particular, we provide an exact expression for any finite bipartite graph size and also deduce asymptotic results as the nu...
Physical demand of seven closed agility drills.
Atkinson, Mark; Rosalie, Simon; Netto, Kevin
2016-11-01
The present study aimed to quantify the demand of seven generic, closed agility drills. Twenty males with experience in invasion sports volunteered to participate in this study. They performed seven, closed agility drills over a standardised 30-m distance. Physical demand measures of peak velocity, total foot contacts, peak impacts, completion time, and maximum heart rate were obtained via the use of wearable sensor technologies. A subjective rating of perceived exertion (RPE) was also obtained. All measures, with the exception of maximum heart rates and RPE were able to delineate drills in terms of physical and physiological demand. The findings of this study exemplify the differences in demand of agility-type movements. Drill demand was dictated by the type of agility movement initiated with the increase in repetitiveness of a given movement type also contributing to increased demand. Findings from this study suggest agility drills can be manipulated to vary physical and physiological demand. This allows for the optimal application of training principles such as overload, progression, and periodisation.
Williamson, Sue
2000-01-01
Believes that music teachers should reassess their views toward adolescent behavior in the music classroom by learning to see their behavior in a positive light. Describes teaching strategies that build on four adolescent behaviors: (1) desire for peer acceptance; (2) abundant energy; (3) love of fun; and (4) limited time-managing skills. (CMK)
Precision of jaw-closing movements for different jaw gaps.
Hellmann, Daniel; Becker, Georg; Giannakopoulos, Nikolaos N; Eberhard, Lydia; Fingerhut, Christopher; Rammelsberg, Peter; Schindler, Hans J
2014-02-01
Jaw-closing movements are basic components of physiological motor actions precisely achieving intercuspation without significant interference. The main purpose of this study was to test the hypothesis that, despite an imperfect intercuspal position, the precision of jaw-closing movements fluctuates within the range of physiological closing movements indispensable for meeting intercuspation without significant interference. For 35 healthy subjects, condylar and incisal point positions for fast and slow jaw-closing, interrupted at different jaw gaps by the use of frontal occlusal plateaus, were compared with uninterrupted physiological jaw closing, with identical jaw gaps, using a telemetric system for measuring jaw position. Examiner-guided centric relation served as a clinically relevant reference position. For jaw gaps ≤4 mm, no significant horizontal or vertical displacement differences were observed for the incisal or condylar points among physiological, fast, and slow jaw-closing. However, the jaw positions under these three closing conditions differed significantly from guided centric relation for nearly all experimental jaw gaps. The findings provide evidence of stringent neuromuscular control of jaw-closing movements in the vicinity of intercuspation. These results might be of clinical relevance to occlusal intervention with different objectives. © 2013 Eur J Oral Sci.
Promoter recognition based on the maximum entropy hidden Markov model.
Zhao, Xiao-yu; Zhang, Jin; Chen, Yuan-yuan; Li, Qiang; Yang, Tao; Pian, Cong; Zhang, Liang-yun
2014-08-01
Since the fast development of genome sequencing has produced large scale data, the current work uses the bioinformatics methods to recognize different gene regions, such as exon, intron and promoter, which play an important role in gene regulations. In this paper, we introduce a new method based on the maximum entropy Markov model (MEMM) to recognize the promoter, which utilizes the biological features of the promoter for the condition. However, it leads to a high false positive rate (FPR). In order to reduce the FPR, we provide another new method based on the maximum entropy hidden Markov model (ME-HMM) without the independence assumption, which could also accommodate the biological features effectively. To demonstrate the precision, the new methods are implemented by R language and the hidden Markov model (HMM) is introduced for comparison. The experimental results show that the new methods may not only overcome the shortcomings of HMM, but also have their own advantages. The results indicate that, MEMM is excellent for identifying the conserved signals, and ME-HMM can demonstrably improve the true positive rate.
Kinematic analysis of sprinting pickup acceleration versus maximum sprinting speed
S. MANZER
2016-10-01
Full Text Available Pickup acceleration and maximum sprinting speed are two essential phases of the 100-m sprint with variant sprinting speed, step length, frequency and technique. The aim of the study was to describe and compare the kinematic parameters of both sprint variants. Hypothetically it was assumed to find differences in sprinting speed, step length, flight and contact times as well as between the body angles of different key positions. From 8 female and 8 male (N=16 track and field junior athletes a double stride of both sprint variants was filmed (200 Hz from a sagittal position and the 10-m-sprint time was measured using triple light barriers. Kinematic data for sprinting speed and angles of knee, hip and ankle were compared with an analysis of variance with repeated measures. The sprinting speed was 7.7 m/s and 8.0 m/s (female and 8.4 m/s and 9.2 m/s (male with significantly higher values of step length, flight time and shorter ground contact time during maximum sprinting speed. Because of the longer flight time, it is possible to place the foot closer to the body but with a more extended knee on the ground. These characteristics can be used as orientation for technique training.
Maximum power operation of interacting molecular motors
Golubeva, Natalia; Imparato, Alberto
2013-01-01
We study the mechanical and thermodynamic properties of different traffic models for kinesin which are relevant in biological and experimental contexts. We find that motor-motor interactions play a fundamental role by enhancing the thermodynamic efficiency at maximum power of the motors......, as compared to the non-interacting system, in a wide range of biologically compatible scenarios. We furthermore consider the case where the motor-motor interaction directly affects the internal chemical cycle and investigate the effect on the system dynamics and thermodynamics....
Maximum a posteriori decoder for digital communications
Altes, Richard A. (Inventor)
1997-01-01
A system and method for decoding by identification of the most likely phase coded signal corresponding to received data. The present invention has particular application to communication with signals that experience spurious random phase perturbations. The generalized estimator-correlator uses a maximum a posteriori (MAP) estimator to generate phase estimates for correlation with incoming data samples and for correlation with mean phases indicative of unique hypothesized signals. The result is a MAP likelihood statistic for each hypothesized transmission, wherein the highest value statistic identifies the transmitted signal.
Kernel-based Maximum Entropy Clustering
JIANG Wei; QU Jiao; LI Benxi
2007-01-01
With the development of Support Vector Machine (SVM),the "kernel method" has been studied in a general way.In this paper,we present a novel Kernel-based Maximum Entropy Clustering algorithm (KMEC).By using mercer kernel functions,the proposed algorithm is firstly map the data from their original space to high dimensional space where the data are expected to be more separable,then perform MEC clustering in the feature space.The experimental results show that the proposed method has better performance in the non-hyperspherical and complex data structure.
The sun and heliosphere at solar maximum.
Smith, E J; Marsden, R G; Balogh, A; Gloeckler, G; Geiss, J; McComas, D J; McKibben, R B; MacDowall, R J; Lanzerotti, L J; Krupp, N; Krueger, H; Landgraf, M
2003-11-14
Recent Ulysses observations from the Sun's equator to the poles reveal fundamental properties of the three-dimensional heliosphere at the maximum in solar activity. The heliospheric magnetic field originates from a magnetic dipole oriented nearly perpendicular to, instead of nearly parallel to, the Sun's rotation axis. Magnetic fields, solar wind, and energetic charged particles from low-latitude sources reach all latitudes, including the polar caps. The very fast high-latitude wind and polar coronal holes disappear and reappear together. Solar wind speed continues to be inversely correlated with coronal temperature. The cosmic ray flux is reduced symmetrically at all latitudes.
Conductivity maximum in a charged colloidal suspension
Bastea, S
2009-01-27
Molecular dynamics simulations of a charged colloidal suspension in the salt-free regime show that the system exhibits an electrical conductivity maximum as a function of colloid charge. We attribute this behavior to two main competing effects: colloid effective charge saturation due to counterion 'condensation' and diffusion slowdown due to the relaxation effect. In agreement with previous observations, we also find that the effective transported charge is larger than the one determined by the Stern layer and suggest that it corresponds to the boundary fluid layer at the surface of the colloidal particles.
Maximum entropy signal restoration with linear programming
Mastin, G.A.; Hanson, R.J.
1988-05-01
Dantzig's bounded-variable method is used to express the maximum entropy restoration problem as a linear programming problem. This is done by approximating the nonlinear objective function with piecewise linear segments, then bounding the variables as a function of the number of segments used. The use of a linear programming approach allows equality constraints found in the traditional Lagrange multiplier method to be relaxed. A robust revised simplex algorithm is used to implement the restoration. Experimental results from 128- and 512-point signal restorations are presented.
COMPARISON BETWEEN FORMULAS OF MAXIMUM SHIP SQUAT
PETRU SERGIU SERBAN
2016-06-01
Full Text Available Ship squat is a combined effect of ship’s draft and trim increase due to ship motion in limited navigation conditions. Over time, researchers conducted tests on models and ships to find a mathematical formula that can define squat. Various forms of calculating squat can be found in the literature. Among those most commonly used are of Barrass, Millward, Eryuzlu or ICORELS. This paper presents a comparison between the squat formulas to see the differences between them and which one provides the most satisfactory results. In this respect a cargo ship at different speeds was considered as a model for maximum squat calculations in canal navigation conditions.
Multi-Channel Maximum Likelihood Pitch Estimation
Christensen, Mads Græsbøll
2012-01-01
In this paper, a method for multi-channel pitch estimation is proposed. The method is a maximum likelihood estimator and is based on a parametric model where the signals in the various channels share the same fundamental frequency but can have different amplitudes, phases, and noise characteristics....... This essentially means that the model allows for different conditions in the various channels, like different signal-to-noise ratios, microphone characteristics and reverberation. Moreover, the method does not assume that a certain array structure is used but rather relies on a more general model and is hence...
Maximum entropy PDF projection: A review
Baggenstoss, Paul M.
2017-06-01
We review maximum entropy (MaxEnt) PDF projection, a method with wide potential applications in statistical inference. The method constructs a sampling distribution for a high-dimensional vector x based on knowing the sampling distribution p(z) of a lower-dimensional feature z = T (x). Under mild conditions, the distribution p(x) having highest possible entropy among all distributions consistent with p(z) may be readily found. Furthermore, the MaxEnt p(x) may be sampled, making the approach useful in Monte Carlo methods. We review the theorem and present a case study in model order selection and classification for handwritten character recognition.
CORA: Emission Line Fitting with Maximum Likelihood
Ness, Jan-Uwe; Wichmann, Rainer
2011-12-01
CORA analyzes emission line spectra with low count numbers and fits them to a line using the maximum likelihood technique. CORA uses a rigorous application of Poisson statistics. From the assumption of Poissonian noise, the software derives the probability for a model of the emission line spectrum to represent the measured spectrum. The likelihood function is used as a criterion for optimizing the parameters of the theoretical spectrum and a fixed point equation is derived allowing an efficient way to obtain line fluxes. CORA has been applied to an X-ray spectrum with the Low Energy Transmission Grating Spectrometer (LETGS) on board the Chandra observatory.
Dynamical maximum entropy approach to flocking
Cavagna, Andrea; Giardina, Irene; Ginelli, Francesco; Mora, Thierry; Piovani, Duccio; Tavarone, Raffaele; Walczak, Aleksandra M.
2014-04-01
We derive a new method to infer from data the out-of-equilibrium alignment dynamics of collectively moving animal groups, by considering the maximum entropy model distribution consistent with temporal and spatial correlations of flight direction. When bird neighborhoods evolve rapidly, this dynamical inference correctly learns the parameters of the model, while a static one relying only on the spatial correlations fails. When neighbors change slowly and the detailed balance is satisfied, we recover the static procedure. We demonstrate the validity of the method on simulated data. The approach is applicable to other systems of active matter.
Maximum Temperature Detection System for Integrated Circuits
Frankiewicz, Maciej; Kos, Andrzej
2015-03-01
The paper describes structure and measurement results of the system detecting present maximum temperature on the surface of an integrated circuit. The system consists of the set of proportional to absolute temperature sensors, temperature processing path and a digital part designed in VHDL. Analogue parts of the circuit where designed with full-custom technique. The system is a part of temperature-controlled oscillator circuit - a power management system based on dynamic frequency scaling method. The oscillator cooperates with microprocessor dedicated for thermal experiments. The whole system is implemented in UMC CMOS 0.18 μm (1.8 V) technology.
Zipf's law and maximum sustainable growth
Malevergne, Y; Sornette, D
2010-01-01
Zipf's law states that the number of firms with size greater than S is inversely proportional to S. Most explanations start with Gibrat's rule of proportional growth but require additional constraints. We show that Gibrat's rule, at all firm levels, yields Zipf's law under a balance condition between the effective growth rate of incumbent firms (which includes their possible demise) and the growth rate of investments in entrant firms. Remarkably, Zipf's law is the signature of the long-term optimal allocation of resources that ensures the maximum sustainable growth rate of an economy.
董楸煌; 陈力
2015-01-01
分析漂浮基双臂空间机器人捕获非合作目标所受的冲击影响效应，及捕获后空间机器人和目标组成的闭链混合系统对目标夹持内力和位形的鲁棒镇定控制。将捕获目标过程视为两机械臂末端与目标碰撞前、碰撞过程和碰撞后三个阶段。在碰撞前空间机器人和目标是分离的两分体系统，利用第二类拉格朗日方程建立漂浮基双臂空间机器人系统的动力学模型。在机械臂末端与目标碰撞阶段，基于空间机器人与目标总动量守恒，利用动量定理计算翻滚目标对空间机器人运动状态的冲击影响效应。在碰撞后，双臂空间机器人已捕获翻滚目标并组成闭链混合系统，针对混合系统在碰撞阶段受冲击影响而产生不稳定运动，提出一种鲁棒控制算法对其进行镇定控制，以实现双臂对目标夹持内力和空间机器人位形的协调控制，并达到期望的稳定状态。数值仿真验证了上述控制算法的有效性。%The impact effect of a free-floating dual-arm space robot to capture a non-cooperative target is analyzed, and during the post-capture the space robot and the target compose a closed-chaln hybrid system, then a clamp force and position robust stabilization control is discussed. The target capture process is considered as pre-impact phase,impact phase and post-impact phase. The space robot and target are separated subsystem in the pre-impact phase, and the dynamics model of free-floating space robot is derived by the second Lagrange equation. In the impact phase, base on the total momentum conservation of space robot and target, the impact effect for the space robot motion is calculated by momentum theorem. In the post-impact phase, the dual-arm space robot has captured the target and formed a closed-chaln hybrid system, considering the unstable motion which is caused by the impact effect in the impact phase, a robust control algorithm is proposed
Localization of b-values and maximum earthquakes; B chi to saidai jishin no chiikisei
Kurimoto, H.
1996-05-01
There is a thought that hourly and spacial blanks in earthquake activity contribute to earthquake occurrence probability. Based on an idea that if so, this tendency may appear also in statistical parameters of earthquake, earthquake activities in every ten years were investigated in the relation between locational distribution of inclined b values of a line relating to the number of earthquake and the magnitude, and the center focus of earthquakes which are M{ge}7.0. The field surveyed is the Japanese Islands and the peripheral ocean, and the area inside the circle with a radius of 100km with a lattice-like point divided in 1{degree} in every direction of latitude and longitude as center was made a unit region. The depth is divided by above 60km or below 60km. As a result, the following were found out: as to epicenters of earthquakes with M{ge}7.0 during the survey period of 100 years, many are in a range of b(b value){le}0.75, and sometimes they may be in a range of b{ge}0.75 in the area from the ocean near Izu peninsula to the ocean off the west Hokkaido; the position of epicenters in a range of b{le}0.75 seems not to come close to the center of contour which indicates the maximum b value. 7 refs., 2 figs.
van Simaeys, S.; Brinkhuis, H.; Pross, J.; Williams, G. L.; Zachos, J. C.
2004-12-01
Various geochemical and biotic climate proxies, and notably deep-sea benthic foraminiferal δ 18O records indicate that the Eocene 'greenhouse' state of the Earth gradually evolved towards an earliest Oligocene 'icehouse' state, eventually triggering the abrupt appearance of large continental ice-sheets on Antarctic at ˜33.3 Ma (Oi-1 event). This, however, was only the first of two major glacial events in the Oligocene. Benthic foraminiferal δ 18O records show a second positive excursion in the mid Oligocene, consistent with a significant ice-sheet expansion and/or cooling at 27.1 Ma (Oi-2b) coincident with magnetosubchron C9n. Here, we report on a mid Oligocene, globally synchronous, Arctic dinoflagellate migration event, calibrated against the upper half of C9n. A sudden appearance, and abundance increases of the Arctic taxon Svalbardella at lower-middle latitudes coincides with the so-called Oi-2b benthic δ 18O event, dated at ˜27.1 Ma. This phenomenon is taken to indicate significant high-latitude surface water cooling, concomitant Antarctic ice-sheet growth, and sea level lowering. The duration of the Svalbardella migrations, and the episode of profound cooling is estimated as ˜500 ka, and is here termed the Oligocene Glacial Maximum (OGM). Our records suggest a close link between the OGM, sea-level fall, and the classic Rupelian-Chattian boundary, magnetostratigraphically dating this boundary as ˜27.1 Ma.
A method to predict amplitude and date of maximum sunspot number
无
2000-01-01
A method to predict the amplitude and date of the maximum sunspot number is introduced. The regression analysis of the relationship between the variation rate of monthly sunspot numbers in the initial stage of solar cycles and both of the maximum and the time-length of ascending period of the cycle showed that they are closely correlative. In general, the maximum will be larger and the ascending period will be shorter when the rate is larger. The rate of sunspot numbers in the initial 2 years of the 23rd cycle is thus analyzed based on these grounds and the maximum of the cycle is predicted. For the smoothed monthly sunspot numbers, the maximum will be about 139.2±18.8 and the time-length of ascending period will be about 3.31±0.42 years, that is to say, the maximum will appear around the spring of the year 2000. For the mean monthly ones, the maximum will be near 170.1±22.9 and the time-length of ascending period will be about 3.42±0.46 years, that is to say, the appearing date of the maximum will be later.
Maximum entropy production and the fluctuation theorem
Dewar, R C [Unite EPHYSE, INRA Centre de Bordeaux-Aquitaine, BP 81, 33883 Villenave d' Ornon Cedex (France)
2005-05-27
Recently the author used an information theoretical formulation of non-equilibrium statistical mechanics (MaxEnt) to derive the fluctuation theorem (FT) concerning the probability of second law violating phase-space paths. A less rigorous argument leading to the variational principle of maximum entropy production (MEP) was also given. Here a more rigorous and general mathematical derivation of MEP from MaxEnt is presented, and the relationship between MEP and the FT is thereby clarified. Specifically, it is shown that the FT allows a general orthogonality property of maximum information entropy to be extended to entropy production itself, from which MEP then follows. The new derivation highlights MEP and the FT as generic properties of MaxEnt probability distributions involving anti-symmetric constraints, independently of any physical interpretation. Physically, MEP applies to the entropy production of those macroscopic fluxes that are free to vary under the imposed constraints, and corresponds to selection of the most probable macroscopic flux configuration. In special cases MaxEnt also leads to various upper bound transport principles. The relationship between MaxEnt and previous theories of irreversible processes due to Onsager, Prigogine and Ziegler is also clarified in the light of these results. (letter to the editor)
Thermodynamic hardness and the maximum hardness principle
Franco-Pérez, Marco; Gázquez, José L.; Ayers, Paul W.; Vela, Alberto
2017-08-01
An alternative definition of hardness (called the thermodynamic hardness) within the grand canonical ensemble formalism is proposed in terms of the partial derivative of the electronic chemical potential with respect to the thermodynamic chemical potential of the reservoir, keeping the temperature and the external potential constant. This temperature dependent definition may be interpreted as a measure of the propensity of a system to go through a charge transfer process when it interacts with other species, and thus it keeps the philosophy of the original definition. When the derivative is expressed in terms of the three-state ensemble model, in the regime of low temperatures and up to temperatures of chemical interest, one finds that for zero fractional charge, the thermodynamic hardness is proportional to T-1(I -A ) , where I is the first ionization potential, A is the electron affinity, and T is the temperature. However, the thermodynamic hardness is nearly zero when the fractional charge is different from zero. Thus, through the present definition, one avoids the presence of the Dirac delta function. We show that the chemical hardness defined in this way provides meaningful and discernible information about the hardness properties of a chemical species exhibiting integer or a fractional average number of electrons, and this analysis allowed us to establish a link between the maximum possible value of the hardness here defined, with the minimum softness principle, showing that both principles are related to minimum fractional charge and maximum stability conditions.
Maximum Likelihood Analysis in the PEN Experiment
Lehman, Martin
2013-10-01
The experimental determination of the π+ -->e+ ν (γ) decay branching ratio currently provides the most accurate test of lepton universality. The PEN experiment at PSI, Switzerland, aims to improve the present world average experimental precision of 3 . 3 ×10-3 to 5 ×10-4 using a stopped beam approach. During runs in 2008-10, PEN has acquired over 2 ×107 πe 2 events. The experiment includes active beam detectors (degrader, mini TPC, target), central MWPC tracking with plastic scintillator hodoscopes, and a spherical pure CsI electromagnetic shower calorimeter. The final branching ratio will be calculated using a maximum likelihood analysis. This analysis assigns each event a probability for 5 processes (π+ -->e+ ν , π+ -->μ+ ν , decay-in-flight, pile-up, and hadronic events) using Monte Carlo verified probability distribution functions of our observables (energies, times, etc). A progress report on the PEN maximum likelihood analysis will be presented. Work supported by NSF grant PHY-0970013.
Hassani, V.; Sorensen, A.J.; Pascoal, A.M.
feedback loop should be filtered by using a so-called wave filtering technique so as to prevent excessive control activity in response to wave frequency components. Furthermore, only the slowly- varying disturbances should be counterbalanced... by the propulsion system, whereas the oscillatory motion induced by the waves (1st-order wave induced loads) should not enter the feedback control loop. To this effect, DP control systems should be designed so as to react to the low fre- quency forces on the vessel...
E. Waarts (Eric); M.A. Carree (Martin); B. Wierenga (Berend)
1991-01-01
textabstractThe authors build on the idea put forward by Shugan to infer product maps from scanning data. They demonstrate that the actual estimation procedure used by Shugan has several methodological problems and may yield unstable estimates. They propose an alternative estimation procedure, full-
Statistics for the Maximum of Several Positive Random Variables with Application to Networking.
1984-12-01
Witherspoon 1 AMSMC-OAA-S (R)/Mr. D. Eckman * 1 AMSMC-OAA-S (R)/Mr. G. Moeller 1AMSMC-OAA-L (R)/Mr. N. Trier 1AMSMC-OAA-A (R)/Mr. B. White 1 AMSMC-OPP (R)fMr...P. Woodhouse * 12 - DISTRIBUTION LIST (Cont’d) I No. of 1 AMSMC-OPI (R)/Mr. R. Heider 2 AMSMC-LEP-L (R)/Ms Sandi Paul 1 AMCPM-ADG-L (R)/Mr. J. Wasson
Lake Basin Fetch and Maximum Length/Width
Minnesota Department of Natural Resources — Linear features representing the Fetch, Maximum Length and Maximum Width of a lake basin. Fetch, maximum length and average width are calcuated from the lake polygon...
Max-Min Optimality of Service Rate Control in Closed Queueing Networks
Xia, Li
2013-04-01
In this technical note, we discuss the optimality properties of service rate control in closed Jackson networks. We prove that when the cost function is linear to a particular service rate, the system performance is monotonic w.r.t. (with respect to) that service rate and the optimal value of that service rate can be either maximum or minimum (we call it Max-Min optimality); When the second-order derivative of the cost function w.r.t. a particular service rate is always positive (negative), which makes the cost function strictly convex (concave), the optimal value of such service rate for the performance maximization (minimization) problem can be either maximum or minimum. To the best of our knowledge, this is the most general result for the optimality of service rates in closed Jackson networks and all the previous works only involve the first conclusion. Moreover, our result is also valid for both the state-dependent and load-dependent service rates, under both the time-average and customer-average performance criteria.
Counting Closed String States in a Box
Meana, M L; Peñalba, J P; Meana, Marco Laucelli; Peñalba, Jesús Puente
1997-01-01
The computation of the microcanonical density of states for a string gas in a finite volume needs a one by one count because of the discrete nature of the spectrum. We present a way to do it using geometrical arguments in phase space. We take advantage of this result in order to obtain the thermodynamical magnitudes of the system. We show that the results for an open universe exactly coincide with the infinite volume limit of the expression obtained for the gas in a box. For any finite volume the Hagedorn temperature is a maximum one, and the specific heat is always positive. We also present a definition of pressure compatible with R-duality seen as an exact symmetry, which allows us to make a study on the physical phase space of the system. Besides a maximum temperature the gas presents an asymptotic pressure.
Maximum entropy principle and texture formation
Arminjon, M; Arminjon, Mayeul; Imbault, Didier
2006-01-01
The macro-to-micro transition in a heterogeneous material is envisaged as the selection of a probability distribution by the Principle of Maximum Entropy (MAXENT). The material is made of constituents, e.g. given crystal orientations. Each constituent is itself made of a large number of elementary constituents. The relevant probability is the volume fraction of the elementary constituents that belong to a given constituent and undergo a given stimulus. Assuming only obvious constraints in MAXENT means describing a maximally disordered material. This is proved to have the same average stimulus in each constituent. By adding a constraint in MAXENT, a new model, potentially interesting e.g. for texture prediction, is obtained.
MLDS: Maximum Likelihood Difference Scaling in R
Kenneth Knoblauch
2008-01-01
Full Text Available The MLDS package in the R programming language can be used to estimate perceptual scales based on the results of psychophysical experiments using the method of difference scaling. In a difference scaling experiment, observers compare two supra-threshold differences (a,b and (c,d on each trial. The approach is based on a stochastic model of how the observer decides which perceptual difference (or interval (a,b or (c,d is greater, and the parameters of the model are estimated using a maximum likelihood criterion. We also propose a method to test the model by evaluating the self-consistency of the estimated scale. The package includes an example in which an observer judges the differences in correlation between scatterplots. The example may be readily adapted to estimate perceptual scales for arbitrary physical continua.
Maximum Profit Configurations of Commercial Engines
Yiran Chen
2011-06-01
Full Text Available An investigation of commercial engines with finite capacity low- and high-price economic subsystems and a generalized commodity transfer law [n ∝ Δ (P m] in commodity flow processes, in which effects of the price elasticities of supply and demand are introduced, is presented in this paper. Optimal cycle configurations of commercial engines for maximum profit are obtained by applying optimal control theory. In some special cases, the eventual state—market equilibrium—is solely determined by the initial conditions and the inherent characteristics of two subsystems; while the different ways of transfer affect the model in respects of the specific forms of the paths of prices and the instantaneous commodity flow, i.e., the optimal configuration.
Maximum Segment Sum, Monadically (distilled tutorial
Jeremy Gibbons
2011-09-01
Full Text Available The maximum segment sum problem is to compute, given a list of integers, the largest of the sums of the contiguous segments of that list. This problem specification maps directly onto a cubic-time algorithm; however, there is a very elegant linear-time solution too. The problem is a classic exercise in the mathematics of program construction, illustrating important principles such as calculational development, pointfree reasoning, algebraic structure, and datatype-genericity. Here, we take a sideways look at the datatype-generic version of the problem in terms of monadic functional programming, instead of the traditional relational approach; the presentation is tutorial in style, and leavened with exercises for the reader.
Maximum process problems in optimal control theory
Goran Peskir
2005-01-01
Full Text Available Given a standard Brownian motion (Btt≥0 and the equation of motion dXt=vtdt+2dBt, we set St=max0≤s≤tXs and consider the optimal control problem supvE(Sτ−Cτ, where c>0 and the supremum is taken over all admissible controls v satisfying vt∈[μ0,μ1] for all t up to τ=inf{t>0|Xt∉(ℓ0,ℓ1} with μ0g∗(St, where s↦g∗(s is a switching curve that is determined explicitly (as the unique solution to a nonlinear differential equation. The solution found demonstrates that the problem formulations based on a maximum functional can be successfully included in optimal control theory (calculus of variations in addition to the classic problem formulations due to Lagrange, Mayer, and Bolza.
Maximum Spectral Luminous Efficacy of White Light
Murphy, T W
2013-01-01
As lighting efficiency improves, it is useful to understand the theoretical limits to luminous efficacy for light that we perceive as white. Independent of the efficiency with which photons are generated, there exists a spectrally-imposed limit to the luminous efficacy of any source of photons. We find that, depending on the acceptable bandpass and---to a lesser extent---the color temperature of the light, the ideal white light source achieves a spectral luminous efficacy of 250--370 lm/W. This is consistent with previous calculations, but here we explore the maximum luminous efficacy as a function of photopic sensitivity threshold, color temperature, and color rendering index; deriving peak performance as a function of all three parameters. We also present example experimental spectra from a variety of light sources, quantifying the intrinsic efficacy of their spectral distributions.
Maximum entropy model for business cycle synchronization
Xi, Ning; Muneepeerakul, Rachata; Azaele, Sandro; Wang, Yougui
2014-11-01
The global economy is a complex dynamical system, whose cyclical fluctuations can mainly be characterized by simultaneous recessions or expansions of major economies. Thus, the researches on the synchronization phenomenon are key to understanding and controlling the dynamics of the global economy. Based on a pairwise maximum entropy model, we analyze the business cycle synchronization of the G7 economic system. We obtain a pairwise-interaction network, which exhibits certain clustering structure and accounts for 45% of the entire structure of the interactions within the G7 system. We also find that the pairwise interactions become increasingly inadequate in capturing the synchronization as the size of economic system grows. Thus, higher-order interactions must be taken into account when investigating behaviors of large economic systems.
Video segmentation using Maximum Entropy Model
QIN Li-juan; ZHUANG Yue-ting; PAN Yun-he; WU Fei
2005-01-01
Detecting objects of interest from a video sequence is a fundamental and critical task in automated visual surveillance.Most current approaches only focus on discriminating moving objects by background subtraction whether or not the objects of interest can be moving or stationary. In this paper, we propose layers segmentation to detect both moving and stationary target objects from surveillance video. We extend the Maximum Entropy (ME) statistical model to segment layers with features, which are collected by constructing a codebook with a set of codewords for each pixel. We also indicate how the training models are used for the discrimination of target objects in surveillance video. Our experimental results are presented in terms of the success rate and the segmenting precision.
A subjective supply-demand model: the maximum Boltzmann/Shannon entropy solution
Piotrowski, Edward W.; Sładkowski, Jan
2009-03-01
The present authors have put forward a projective geometry model of rational trading. The expected (mean) value of the time that is necessary to strike a deal and the profit strongly depend on the strategies adopted. A frequent trader often prefers maximal profit intensity to the maximization of profit resulting from a separate transaction because the gross profit/income is the adopted/recommended benchmark. To investigate activities that have different periods of duration we define, following the queuing theory, the profit intensity as a measure of this economic category. The profit intensity in repeated trading has a unique property of attaining its maximum at a fixed point regardless of the shape of demand curves for a wide class of probability distributions of random reverse transactions (i.e. closing of the position). These conclusions remain valid for an analogous model based on supply analysis. This type of market game is often considered in research aiming at finding an algorithm that maximizes profit of a trader who negotiates prices with the Rest of the World (a collective opponent), possessing a definite and objective supply profile. Such idealization neglects the sometimes important influence of an individual trader on the demand/supply profile of the Rest of the World and in extreme cases questions the very idea of demand/supply profile. Therefore we put forward a trading model in which the demand/supply profile of the Rest of the World induces the (rational) trader to (subjectively) presume that he/she lacks (almost) all knowledge concerning the market but his/her average frequency of trade. This point of view introduces maximum entropy principles into the model and broadens the range of economic phenomena that can be perceived as a sort of thermodynamical system. As a consequence, the profit intensity has a fixed point with an astonishing connection with Fibonacci classical works and looking for the quickest algorithm for obtaining the extremum of a
The relationship between the Guinea Highlands and the West African offshore rainfall maximum
Hamilton, H. L.; Young, G. S.; Evans, J. L.; Fuentes, J. D.; Núñez Ocasio, K. M.
2017-01-01
Satellite rainfall estimates reveal a consistent rainfall maximum off the West African coast during the monsoon season. An analysis of 16 years of rainfall in the monsoon season is conducted to explore the drivers of such copious amounts of rainfall. Composites of daily rainfall and midlevel meridional winds centered on the days with maximum rainfall show that the day with the heaviest rainfall follows the strongest midlevel northerlies but coincides with peak low-level moisture convergence. Rain type composites show that convective rain dominates the study region. The dominant contribution to the offshore rainfall maximum is convective development driven by the enhancement of upslope winds near the Guinea Highlands. The enhancement in the upslope flow is closely related to African easterly waves propagating off the continent that generate low-level cyclonic vorticity and convergence. Numerical simulations reproduce the observed rainfall maximum and indicate that it weakens if the African topography is reduced.
Evaluation of pliers' grip spans in the maximum gripping task and sub-maximum cutting task.
Kim, Dae-Min; Kong, Yong-Ku
2016-12-01
A total of 25 males participated to investigate the effects of the grip spans of pliers on the total grip force, individual finger forces and muscle activities in the maximum gripping task and wire-cutting tasks. In the maximum gripping task, results showed that the 50-mm grip span had significantly higher total grip strength than the other grip spans. In the cutting task, the 50-mm grip span also showed significantly higher grip strength than the 65-mm and 80-mm grip spans, whereas the muscle activities showed a higher value at 80-mm grip span. The ratios of cutting force to maximum grip strength were also investigated. Ratios of 30.3%, 31.3% and 41.3% were obtained by grip spans of 50-mm, 65-mm, and 80-mm, respectively. Thus, the 50-mm grip span for pliers might be recommended to provide maximum exertion in gripping tasks, as well as lower maximum-cutting force ratios in the cutting tasks.
Cosmic shear measurement with maximum likelihood and maximum a posteriori inference
Hall, Alex
2016-01-01
We investigate the problem of noise bias in maximum likelihood and maximum a posteriori estimators for cosmic shear. We derive the leading and next-to-leading order biases and compute them in the context of galaxy ellipticity measurements, extending previous work on maximum likelihood inference for weak lensing. We show that a large part of the bias on these point estimators can be removed using information already contained in the likelihood when a galaxy model is specified, without the need for external calibration. We test these bias-corrected estimators on simulated galaxy images similar to those expected from planned space-based weak lensing surveys, with very promising results. We find that the introduction of an intrinsic shape prior mitigates noise bias, such that the maximum a posteriori estimate can be made less biased than the maximum likelihood estimate. Second-order terms offer a check on the convergence of the estimators, but are largely sub-dominant. We show how biases propagate to shear estima...
An Efficient Algorithm for Maximum-Entropy Extension of Block-Circulant Covariance Matrices
Carli, Francesca P; Pavon, Michele; Picci, Giorgio
2011-01-01
This paper deals with maximum entropy completion of partially specified block-circulant matrices. Since positive definite symmetric circulants happen to be covariance matrices of stationary periodic processes, in particular of stationary reciprocal processes, this problem has applications in signal processing, in particular to image modeling. Maximum entropy completion is strictly related to maximum likelihood estimation subject to certain conditional independence constraints. The maximum entropy completion problem for block-circulant matrices is a nonlinear problem which has recently been solved by the authors, although leaving open the problem of an efficient computation of the solution. The main contribution of this paper is to provide an efficient algorithm for computing the solution. Simulation shows that our iterative scheme outperforms various existing approaches, especially for large dimensional problems. A necessary and sufficient condition for the existence of a positive definite circulant completio...
A new solar signal: Average maximum sunspot magnetic fields independent of activity cycle
Livingston, William
2016-01-01
Over the past five years, 2010-2015, we have observed, in the near infrared (IR), the maximum magnetic field strengths for 4145 sunspot umbrae. Herein we distinguish field strengths from field flux. (Most solar magnetographs measure flux). Maximum field strength in umbrae is co-spatial with the position of umbral minimum brightness (Norton and Gilman, 2004). We measure field strength by the Zeeman splitting of the Fe 15648.5 A spectral line. We show that in the IR no cycle dependence on average maximum field strength (2050 G) has been found +/- 20 Gauss. A similar analysis of 17,450 spots observed by the Helioseismic and Magnetic Imager onboard the Solar Dynamics Observatory reveal the same cycle independence +/- 0.18 G., or a variance of 0.01%. This is found not to change over the ongoing 2010-2015 minimum to maximum cycle. Conclude the average maximum umbral fields on the Sun are constant with time.
The Change in the Maximum Wind Speed and the Impact of it on Agricultural Production
WU Jian-mei; SUN Jin-sen; SUI Gui-ling; XIE Su-he; WANG Meng
2012-01-01
Using the data on the maximum wind speed within ten minutes every month in the period 1971-2009 in Zhucheng City of Shandong Province, we conduct statistical analysis of the maximum wind speed in Zhucheng City. The results show that over thirty-nine years, the annual maximum wind speed in four seasons in Zhucheng City tends to decline. The annual maximum wind speed declines at the rate of 1.45 m/s every 10 years. It falls fastest in winter, with decline rate of 1.73 m/s every 10 years; it is close to the average annual maximum wind speed in spring and autumn, with decline rate of 1.44 m/s and 14.8 m/s every 10 years, respectively; it falls slowest in summer, and the extreme value of the maximum wind speed occurs mainly in spring. The curve of changes in the monthly maximum wind speed in Zhucheng City assumes diminishing shape of "two peaks and one trough". We conduct preliminary analysis of the windy weather situation, and put forth specific defensive measures against the hazards of strong winds in the different periods.
On $2k$-Variable Symmetric Boolean Functions with Maximum Algebraic Immunity $k$
Wang, Hui; Li, Yuan; Kan, Haibin
2011-01-01
Given a positive even integer $n$, it is found that the weight distribution of any $n$-variable symmetric Boolean function with maximum algebraic immunity $\\frac{n}{2}$ is determined by the binary expansion of $n$. Based on that, all $n$-variable symmetric Boolean functions with maximum algebraic immunity are constructed. The amount is $(2\\wt(n)+1)2^{\\lfloor \\log_2 n \\rfloor}$.
On Global Magnetic ``Monopoly'' Near Solar Cycle Maximums
Kryvodubskyj, V.
During last maximums of the solar activity the both poles of the polar magnetic field had the same polarity. Since in the turbulent α Ω -dynamo model the excitation thresholds of the periodic dipole and quadrupole modes of the poloidal madnetic field (PMF) are rather close [Parker E. N.: 1971, Ap.J. V. 164, p. 491] then it is possible that the quadrupole mode may be excited due to variations of physical parameters in a some regions of the solar convection zone (SCZ). The pattern of the excited modes (dipole, quadrupole, octupole, etc.) is determined by the values of wave number of the Parker's dynamo-wave. We calculated these values for the SCZ model by Stix (1989) [Stix M.: 1989, The Sun. Berlin, p. 200] in the vicinity of solar tachocline (a region of strong shear of angular velocity at the base of the SCZ) with using our estimation of the helical turbulence parameter [Krivodubskij V. N.: 1998, Astron. Reports V. 42, No 1, p. 122] and values of the radial gradient of the angular velocity obtained from the newer helioseismic measurements (during rising phase of 23th solar cycle: 1995-1999) [Howe R.,Christensen-Dalsgaard J., Hill F. et al.: 2000, Science. V. 287, p. 2456]. It is found out that at low latitudes dynamo mechanism produces rather the dipole (wave number ≈ -7), the main antisymmetric, relatively to equatorial plane, mode of the PMF; while at the latitudes higher than 50o the conditions are more favourable for exciting of the quadrupole (wave number ≈ +8), the lowest symmetric mode. Arised north-south magnetic structure asymmetry gives an opportunity to explain the space magnetic anomaly of the PMF (``monopoly'') observed near solar cycle maximums.
Needs to Update Probable Maximum Precipitation for Critical Infrastructure
Pathak, C. S.; England, J. F.
2015-12-01
Probable Maximum Precipitation (PMP) is theoretically the greatest depth of precipitation for a given duration that is physically possible over a given size storm area at a particular geographical location at a certain time of the year. It is used to develop inflow flood hydrographs, known as Probable Maximum Flood (PMF), as design standard for high-risk flood-hazard structures, such as dams and nuclear power plants. PMP estimation methodology was developed in the 1930s and 40s when many dams were constructed in the US. The procedures to estimate PMP were later standardized by the World Meteorological Organization (WMO) in 1973 and revised in 1986.In the US, PMP estimates were published in a series of Hydrometeorological Reports (e.g., HMR55A, HMR57, and HMR58/59) by the National Weather Service since 1950s. In these reports, storm data up to 1980s were used to establish the current PMP estimates. Since that time, we have acquired additional meteorological data for 30 to 40 years, including newly available radar and satellite based precipitation data. These data sets are expected to have improved data quality and availability in both time and space. In addition, significant numbers of extreme storms have occurred and selected numbers of these events were even close to or exceeding the current PMP estimates, in some cases. In the last 50 years, climate science has progressed and scientists have better and improved understanding of atmospheric physics of extreme storms. However, applied research in estimation of PMP has been lagging behind. Alternative methods, such as atmospheric numerical modeling, should be investigated for estimating PMP and associated uncertainties. It would be highly desirable if regional atmospheric numerical models could be utilized in the estimation of PMP and their uncertainties, in addition to methods used to originally develop PMP index maps in the existing hydrometeorological reports.
Optimization of agitation and aeration conditions for maximum virginiamycin production.
Shioya, S; Morikawa, M; Kajihara, Y; Shimizu, H
1999-02-01
To maximize the productivity of virginiamycin, which is a commercially important antibiotic as an animal feed additive, an empirical approach was employed in the batch culture of Streptomyces virginiae. Here, the effects of dissolved oxygen (DO) concentration and agitation speed on the maximum cell concentration at the production phase, as well as on the productivity of virginiamycin, were investigated. To maintain the DO concentration in the fermentor at a certain level, either the agitation speed or the inlet oxygen concentration of the supply gas was manipulated. It was found that increasing the agitation speed had a positive effect on the antibiotic productivity independent of the DO concentration. The optimum DO concentration, agitation speed and addition of an autoregulator, virginiae butanolide C (VB-C), were determined to maximize virginiamycin productivity. The optimal strategy was to start the cultivation at 450 rpm and to continue until the DO concentration reached 80%. After reaching 80%, the DO concentration was maintained at this level by changing the agitation speed, up to a maximum of 800 rpm. The addition of an optimal amount of the autoregulator VB-C in an experiment resulted in the maximal production of virginiamycin M (399 mg/l), which was about 1.8-fold those obtained previously.
Generalized degeneracy, dynamic monopolies and maximum degenerate subgraphs
Zaker, Manouchehr
2012-01-01
A graph $G$ is said to be a $k$-degenerate graph if any subgraph of $G$ contains a vertex of degree at most $k$. Let $\\kappa$ be any non-negative function on the vertex set of $G$. We first define a $\\kappa$-degenerate graph. Next we give an efficient algorithm to determine whether a graph is $\\kappa$-degenerate. We revisit the concept of dynamic monopolies in graphs. The latter notion is used in formulation and analysis of spread of influence such as disease or opinion in social networks. We consider dynamic monopolies with (not necessarily positive) but integral threshold assignments. We obtain a sufficient and necessary relationship between dynamic monopolies and generalized degeneracy. As applications of the previous results we consider the problem of determining the maximum size of $\\kappa$-degenerate (or $k$-degenerate) induced subgraphs in any graph. We obtain some upper and lower bounds for the maximum size of any $\\kappa$-degenerate induced subgraph in general and regular graphs. All of our bounds ar...
THE MAXIMUM AND MINIMUM DEGREES OF RANDOM BIPARTITE MULTIGRAPHS
Chen Ailian; Zhang Fuji; Li Hao
2011-01-01
In this paper the authors generalize the classic random bipartite graph model, and define a model of the random bipartite multigraphs as follows: let m=m(n) be a positive integer-valued function on n and (n, m; {pk}) the probability space consisting of all the labeled bipartite multigraphs with two vertex sets A={a1,a2,...,an} and B= {b1, b2,..., bm}, in which the numbers taibj of the edges between any two vertices ai∈A and bj∈B are identically distributed independent random variables with distribution P{taibj}=k}=pk, k=0, 1, 2,..., where pk≥0 and ∑ pk=1. They obtain that Xc,d,A, the number of vertices in A with degree between c and d of Gn,m∈ (n, m;{Pk}) has asymptotically Poisson distribution, and answer the following two questions about the space (n,m; {pk}) with {pk} having geometric distribution, binomial distribution and Poisson distribution, respectively. Under which condition for {Pk} can there be a function D(n) such that almost every random multigraph Gnm∈ (n, m; {pk}) has maximum degree D(n) in A? under which condition for {pk} has almost every multigraph Gn,m∈ (n,m;{pk}) a unique vertex of maximum degree in A?
Bot, Radu Ioan
2008-01-01
In this paper we introduce the notion of enlargement of a positive set in SSD spaces. To a maximally positive set $A$ we associate a family of enlargements $\\E(A)$ and characterize the smallest and biggest element in this family with respect to the inclusion relation. We also emphasize the existence of a bijection between the subfamily of closed enlargements of $\\E(A)$ and the family of so-called representative functions of $A$. We show that the extremal elements of the latter family are two functions recently introduced and studied by Stephen Simons. In this way we extend to SSD spaces some former results given for monotone and maximally monotone sets in Banach spaces.
20 CFR 211.14 - Maximum creditable compensation.
2010-04-01
... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Maximum creditable compensation. 211.14... CREDITABLE RAILROAD COMPENSATION § 211.14 Maximum creditable compensation. Maximum creditable compensation... Employment Accounts shall notify each employer of the amount of maximum creditable compensation applicable...
49 CFR 230.24 - Maximum allowable stress.
2010-10-01
... 49 Transportation 4 2010-10-01 2010-10-01 false Maximum allowable stress. 230.24 Section 230.24... Allowable Stress § 230.24 Maximum allowable stress. (a) Maximum allowable stress value. The maximum allowable stress value on any component of a steam locomotive boiler shall not exceed 1/4 of the ultimate...
Theoretical Estimate of Maximum Possible Nuclear Explosion
Bethe, H. A.
1950-01-31
The maximum nuclear accident which could occur in a Na-cooled, Be moderated, Pu and power producing reactor is estimated theoretically. (T.R.H.) 2O82 Results of nuclear calculations for a variety of compositions of fast, heterogeneous, sodium-cooled, U-235-fueled, plutonium- and power-producing reactors are reported. Core compositions typical of plate-, pin-, or wire-type fuel elements and with uranium as metal, alloy, and oxide were considered. These compositions included atom ratios in the following range: U-23B to U-235 from 2 to 8; sodium to U-235 from 1.5 to 12; iron to U-235 from 5 to 18; and vanadium to U-235 from 11 to 33. Calculations were performed to determine the effect of lead and iron reflectors between the core and blanket. Both natural and depleted uranium were evaluated as the blanket fertile material. Reactors were compared on a basis of conversion ratio, specific power, and the product of both. The calculated results are in general agreement with the experimental results from fast reactor assemblies. An analysis of the effect of new cross-section values as they became available is included. (auth)
Proposed principles of maximum local entropy production.
Ross, John; Corlan, Alexandru D; Müller, Stefan C
2012-07-12
Articles have appeared that rely on the application of some form of "maximum local entropy production principle" (MEPP). This is usually an optimization principle that is supposed to compensate for the lack of structural information and measurements about complex systems, even systems as complex and as little characterized as the whole biosphere or the atmosphere of the Earth or even of less known bodies in the solar system. We select a number of claims from a few well-known papers that advocate this principle and we show that they are in error with the help of simple examples of well-known chemical and physical systems. These erroneous interpretations can be attributed to ignoring well-established and verified theoretical results such as (1) entropy does not necessarily increase in nonisolated systems, such as "local" subsystems; (2) macroscopic systems, as described by classical physics, are in general intrinsically deterministic-there are no "choices" in their evolution to be selected by using supplementary principles; (3) macroscopic deterministic systems are predictable to the extent to which their state and structure is sufficiently well-known; usually they are not sufficiently known, and probabilistic methods need to be employed for their prediction; and (4) there is no causal relationship between the thermodynamic constraints and the kinetics of reaction systems. In conclusion, any predictions based on MEPP-like principles should not be considered scientifically founded.
Maximum entropy production and plant optimization theories.
Dewar, Roderick C
2010-05-12
Plant ecologists have proposed a variety of optimization theories to explain the adaptive behaviour and evolution of plants from the perspective of natural selection ('survival of the fittest'). Optimization theories identify some objective function--such as shoot or canopy photosynthesis, or growth rate--which is maximized with respect to one or more plant functional traits. However, the link between these objective functions and individual plant fitness is seldom quantified and there remains some uncertainty about the most appropriate choice of objective function to use. Here, plants are viewed from an alternative thermodynamic perspective, as members of a wider class of non-equilibrium systems for which maximum entropy production (MEP) has been proposed as a common theoretical principle. I show how MEP unifies different plant optimization theories that have been proposed previously on the basis of ad hoc measures of individual fitness--the different objective functions of these theories emerge as examples of entropy production on different spatio-temporal scales. The proposed statistical explanation of MEP, that states of MEP are by far the most probable ones, suggests a new and extended paradigm for biological evolution--'survival of the likeliest'--which applies from biomacromolecules to ecosystems, not just to individuals.
Maximum likelihood continuity mapping for fraud detection
Hogden, J.
1997-05-01
The author describes a novel time-series analysis technique called maximum likelihood continuity mapping (MALCOM), and focuses on one application of MALCOM: detecting fraud in medical insurance claims. Given a training data set composed of typical sequences, MALCOM creates a stochastic model of sequence generation, called a continuity map (CM). A CM maximizes the probability of sequences in the training set given the model constraints, CMs can be used to estimate the likelihood of sequences not found in the training set, enabling anomaly detection and sequence prediction--important aspects of data mining. Since MALCOM can be used on sequences of categorical data (e.g., sequences of words) as well as real valued data, MALCOM is also a potential replacement for database search tools such as N-gram analysis. In a recent experiment, MALCOM was used to evaluate the likelihood of patient medical histories, where ``medical history`` is used to mean the sequence of medical procedures performed on a patient. Physicians whose patients had anomalous medical histories (according to MALCOM) were evaluated for fraud by an independent agency. Of the small sample (12 physicians) that has been evaluated, 92% have been determined fraudulent or abusive. Despite the small sample, these results are encouraging.
Maximum life spiral bevel reduction design
Savage, M.; Prasanna, M. G.; Coe, H. H.
1992-07-01
Optimization is applied to the design of a spiral bevel gear reduction for maximum life at a given size. A modified feasible directions search algorithm permits a wide variety of inequality constraints and exact design requirements to be met with low sensitivity to initial values. Gear tooth bending strength and minimum contact ratio under load are included in the active constraints. The optimal design of the spiral bevel gear reduction includes the selection of bearing and shaft proportions in addition to gear mesh parameters. System life is maximized subject to a fixed back-cone distance of the spiral bevel gear set for a specified speed ratio, shaft angle, input torque, and power. Significant parameters in the design are: the spiral angle, the pressure angle, the numbers of teeth on the pinion and gear, and the location and size of the four support bearings. Interpolated polynomials expand the discrete bearing properties and proportions into continuous variables for gradient optimization. After finding the continuous optimum, a designer can analyze near optimal designs for comparison and selection. Design examples show the influence of the bearing lives on the gear parameters in the optimal configurations. For a fixed back-cone distance, optimal designs with larger shaft angles have larger service lives.
CORA - emission line fitting with Maximum Likelihood
Ness, J.-U.; Wichmann, R.
2002-07-01
The advent of pipeline-processed data both from space- and ground-based observatories often disposes of the need of full-fledged data reduction software with its associated steep learning curve. In many cases, a simple tool doing just one task, and doing it right, is all one wishes. In this spirit we introduce CORA, a line fitting tool based on the maximum likelihood technique, which has been developed for the analysis of emission line spectra with low count numbers and has successfully been used in several publications. CORA uses a rigorous application of Poisson statistics. From the assumption of Poissonian noise we derive the probability for a model of the emission line spectrum to represent the measured spectrum. The likelihood function is used as a criterion for optimizing the parameters of the theoretical spectrum and a fixed point equation is derived allowing an efficient way to obtain line fluxes. As an example we demonstrate the functionality of the program with an X-ray spectrum of Capella obtained with the Low Energy Transmission Grating Spectrometer (LETGS) on board the Chandra observatory and choose the analysis of the Ne IX triplet around 13.5 Å.
Finding maximum JPEG image block code size
Lakhani, Gopal
2012-07-01
We present a study of JPEG baseline coding. It aims to determine the minimum storage needed to buffer the JPEG Huffman code bits of 8-bit image blocks. Since DC is coded separately, and the encoder represents each AC coefficient by a pair of run-length/AC coefficient level, the net problem is to perform an efficient search for the optimal run-level pair sequence. We formulate it as a two-dimensional, nonlinear, integer programming problem and solve it using a branch-and-bound based search method. We derive two types of constraints to prune the search space. The first one is given as an upper-bound for the sum of squares of AC coefficients of a block, and it is used to discard sequences that cannot represent valid DCT blocks. The second type constraints are based on some interesting properties of the Huffman code table, and these are used to prune sequences that cannot be part of optimal solutions. Our main result is that if the default JPEG compression setting is used, space of minimum of 346 bits and maximum of 433 bits is sufficient to buffer the AC code bits of 8-bit image blocks. Our implementation also pruned the search space extremely well; the first constraint reduced the initial search space of 4 nodes down to less than 2 nodes, and the second set of constraints reduced it further by 97.8%.
Maximum likelihood estimates of pairwise rearrangement distances.
Serdoz, Stuart; Egri-Nagy, Attila; Sumner, Jeremy; Holland, Barbara R; Jarvis, Peter D; Tanaka, Mark M; Francis, Andrew R
2017-06-21
Accurate estimation of evolutionary distances between taxa is important for many phylogenetic reconstruction methods. Distances can be estimated using a range of different evolutionary models, from single nucleotide polymorphisms to large-scale genome rearrangements. Corresponding corrections for genome rearrangement distances fall into 3 categories: Empirical computational studies, Bayesian/MCMC approaches, and combinatorial approaches. Here, we introduce a maximum likelihood estimator for the inversion distance between a pair of genomes, using a group-theoretic approach to modelling inversions introduced recently. This MLE functions as a corrected distance: in particular, we show that because of the way sequences of inversions interact with each other, it is quite possible for minimal distance and MLE distance to differently order the distances of two genomes from a third. The second aspect tackles the problem of accounting for the symmetries of circular arrangements. While, generally, a frame of reference is locked, and all computation made accordingly, this work incorporates the action of the dihedral group so that distance estimates are free from any a priori frame of reference. The philosophy of accounting for symmetries can be applied to any existing correction method, for which examples are offered. Copyright © 2017 Elsevier Ltd. All rights reserved.
LIBOR troubles: Anomalous movements detection based on maximum entropy
Bariviera, Aurelio F.; Martín, María T.; Plastino, Angelo; Vampa, Victoria
2016-05-01
According to the definition of the London Interbank Offered Rate (LIBOR), contributing banks should give fair estimates of their own borrowing costs in the interbank market. Between 2007 and 2009, several banks made inappropriate submissions of LIBOR, sometimes motivated by profit-seeking from their trading positions. In 2012, several newspapers' articles began to cast doubt on LIBOR integrity, leading surveillance authorities to conduct investigations on banks' behavior. Such procedures resulted in severe fines imposed to involved banks, who recognized their financial inappropriate conduct. In this paper, we uncover such unfair behavior by using a forecasting method based on the Maximum Entropy principle. Our results are robust against changes in parameter settings and could be of great help for market surveillance.
Neutral position of persistent direction-changing positional nystagmus.
Ichijo, Hiroaki
2016-02-01
The aim of this study was to measure the neutral position of direction-changing apogeotropic positional nystagmus (heavy cupula of the horizontal semicircular canal) and persistent direction-changing geotropic positional nystagmus (light cupula of the horizontal semicircular canal). We conducted a prospective case series study on 31 patients with heavy cupula (12 males, 19 females; mean age, 64.3 years) and 33 patients with light cupula (10 males, 23 females; mean age, 60.9 years). We measured the angle of the neutral position in patients with heavy cupula (θ 1) and that in patients with light cupula (θ 2) using a large protractor. The mean value and standard deviation of θ 1 was 31.6 ± 22.4°, minimum value was 5°, and maximum value was 89°. The mean value and standard deviation of θ 2 was 44.4 ± 20.5°, minimum value was 5°, and maximum value was 85°. θ 2 was significantly greater than θ 1 (p < 0.05). The neutral position varies widely. Some patients exhibit a great angle (more than 40°); therefore, examiners should make patients adopt a completely lateral position in the supine head roll test and should confirm the direction of nystagmus in order to avoid mistaking positional nystagmus for spontaneous nystagmus.
Boedeker, Peter
2017-01-01
Hierarchical linear modeling (HLM) is a useful tool when analyzing data collected from groups. There are many decisions to be made when constructing and estimating a model in HLM including which estimation technique to use. Three of the estimation techniques available when analyzing data with HLM are maximum likelihood, restricted maximum…
Linear Positivity and Virtual Probability
Hartle, J B
2004-01-01
We investigate the quantum theory of closed systems based on the linear positivity decoherence condition of Goldstein and Page. A quantum theory of closed systems requires two elements; 1) a condition specifying which sets of histories may be assigned probabilities that are consistent with the rules of probability theory, and 2) a rule for those probabilities. The linear positivity condition of Goldstein and Page is the weakest of the general conditions proposed so far. Its general properties relating to exact probability sum rules, time-neutrality, and conservation laws are explored. Its inconsistency with the usual notion of independent subsystems in quantum mechanics is reviewed. Its relation to the stronger condition of medium decoherence necessary for classicality is discussed. The linear positivity of histories in a number of simple model systems is investigated with the aim of exhibiting linearly positive sets of histories that are not decoherent. The utility of extending the notion of probability to i...
Scorpion: Close Air Support (CAS) aircraft
Allen, Chris; Cheng, Rendy; Koehler, Grant; Lyon, Sean; Paguio, Cecilia
1991-01-01
The objective is to outline the results of the preliminary design of the Scorpion, a proposed close air support aircraft. The results obtained include complete preliminary analysis of the aircraft in the areas of aerodynamics, structures, avionics and electronics, stability and control, weight and balance, propulsion systems, and costs. A conventional wing, twin jet, twin-tail aircraft was chosen to maximize the desirable characteristics. The Scorpion will feature low speed maneuverability, high survivability, low cost, and low maintenance. The life cycle cost per aircraft will be 17.5 million dollars. The maximum takeoff weight will be 52,760 pounds. Wing loading will be 90 psf. The thrust to weight will be 0.6 lbs/lb. This aircraft meets the specified mission requirements. Some modifications have been suggested to further optimize the design.
Mahanta, J.; P. K. Das
2012-01-01
A new class of fuzzy closed sets, namely fuzzy weakly closed set in a fuzzy topological space is introduced and it is established that this class of fuzzy closed sets lies between fuzzy closed sets and fuzzy generalized closed sets. Alongwith the study of fundamental results of such closed sets, we define and characterize fuzzy weakly compact space and fuzzy weakly closed space.
Rotational mixing in close binaries
de Mink, S E; Langer, N; Yoon, S -Ch; Brott, I; Glebbeek, E; Verkoulen, M; Pols, O R
2008-01-01
Rotational mixing is a very important but uncertain process in the evolution of massive stars. We propose to use close binaries to test its efficiency. Based on rotating single stellar models we predict nitrogen surface enhancements for tidally locked binaries. Furthermore we demonstrate the possibility of a new evolutionary scenario for very massive (M > 40 solar mass) close (P < 3 days) binaries: Case M, in which mixing is so efficient that the stars evolve quasi-chemically homogeneously, stay compact and avoid any Roche-lobe overflow, leading to very close (double) WR binaries.
Closed planar curves without inflections
Ohno, Shuntaro; Umehara, Masaaki
2011-01-01
We define a computable topological invariant $\\mu(\\gamma)$ for generic closed planar regular curves $\\gamma$, which gives an effective lower bound for the number of inflection points on a given generic closed planar curve. Using it, we classify the topological types of locally convex curves (i.e. closed planar regular curves without inflections) whose numbers of crossings are less than or equal to five. Moreover, we discuss the relationship between the number of double tangents and the invariant $\\mu(\\gamma)$ on a given $\\gamma$.
THE STRENGTH OF THE DISSOLVED OXYGEN MAXIMUM IN THE VERTICAL DISTRIBUTION OF N ANSHA ISLANDS WATERS
林洪瑛; 程赛伟; 韩舞鹰
2002-01-01
Observation data from a cruise in the Nansha Islands, in May to June 1990, Decem ber, 1993, September to October 1994, and July, 1999, respectively, were used to develop the method presented here to indicate the existing strength of the diss ol ved oxygen maximum in the vertical distribution of Nansha Islands waters. Its se asonal variation and regional distribution are discussed in this paper. Analysis results showed that the distribution of the strength of dissolved oxygen maximum (Domax-Dosur) was closely related to the upper layer circulation and the bioactivity of Nansha Islands seawater.
Control of Hybrid System Using Multi-Input Inverter and Maximum Power Point Tracking
N.Sivakumar
2013-07-01
Full Text Available The objective of this paper is to control the Wind/PV hybrid system using Multi-input inverter to get constant output power for different operating conditions. The MPPT also used in this system to get the maximum peak power to the load. The perturbation observation (P&O method is used to accomplish the maximum power point tracking algorithm for input sources. The operating principle of the open loop and closed loop circuit of multi-input inverter is discussed.
Wang, Tianxiao
2010-01-01
This paper formulates and studies a stochastic maximum principle for forward-backward stochastic Volterra integral equations (FBSVIEs in short), while the control area is assumed to be convex. Then a linear quadratic (LQ in short) problem for backward stochastic Volterra integral equations (BSVIEs in short) is present to illustrate the aforementioned optimal control problem. Motivated by the technical skills in solving above problem, a more convenient and briefer method for the unique solvability of M-solution for BSVIEs is proposed. At last, we will investigate a risk minimization problem by means of the maximum principle for FBSVIEs. Closed-form optimal portfolio is obtained in some special cases.
Closing the Gap on Measuring Heat Waves
Perkins, S. E.; Alexander, L.
2012-12-01
Since the 4th IPCC assessment report, the scientific literature has established that anthropogenic climate change encompasses adverse changes in both mean climate conditions and extreme events, such as heat waves. Indeed, the affects of heat waves are felt across many different sectors, and have high economic, human, and physical impacts over many global regions. The spatial and monetary scale of heat wave impacts emphasizes the necessity of measuring and studying such events in an informative manner, which gives justice to the geographical region affected, the communities impacted, and the climatic fields involved. However, due to such wide interest in heat waves, their definition remains broad in describing a period of consecutive days where conditions are excessively hotter than normal. This has allowed for the employment of a plethora of metrics, which are usually unique to a given sector, or do not appropriately describe some of the important features of heat wave events. As such, it is difficult to ascertain a clear message regarding changes in heat waves, both in the observed record and in projections of future climate. This study addresses this issue by developing a multi-index, multi-aspect framework in which to measure heat waves. The methodology was constructed by assessing a wide range of heat wave and heat wave-related indices, both proposed and employed in the scientific literature. The broad implications of the occurrences, frequency and duration of heat waves and respective changes were also highly considered. The resulting indices measure three or more consecutive days where 1) maximum temperature exceeds the 90th percentile (TX90pct); 2) minimum temperature exceeds the 90th percentile (TN90pct); and 3) daily average temperature has a positive excess heat factor (EHF). The 90th percentiles from which TX90pct and TN90pct are calculated are based on 15-day windows for each calendar day, whereas the EHF is based upon two pre-calculated indices that
Analysis of Maximum Shear Stress of Asphalt Pavement%沥青路面最大剪应力分析
陈光伟; 费国新; 陈荣生
2012-01-01
Factors and variation of the maximum shear stress of the typical semi-rigid asphalt pavement and bridge deck pavement in Jiangsu were calculated and analyzed using ABAQUS software. The maximum shear stress distribution was consistent with the semi-rigid asphalt pavement and bridge deck pavement and the maximum shear stress level was close under the level. The maximum shear stress showed a positive correlation with the verticaland horizontal vehicle loads and was significantly affected by the loads. The maximum shear stress decreased as the pavement thickness and modulus increase, and increased as the semi-rigid base thickness and modulus increase, but the increase value was small. Thereby these analysis above would provides an academic basis for solving the rutting problem.%采用ABAQUS软件对典型半刚性基层沥青路面及桥面铺装层中最大剪应力影响因素及变化规律进行了计算与分析。分析表明：半刚性基层沥青路面与水泥混凝土桥面铺装层最大剪应力分布与变化规律基本一致，在相同荷载条件作用下，最大剪应力水平亦接近；最大剪应力与车辆垂直荷载和水平荷载作用呈正比关系，最大剪应力受其影响显著；最大剪应力随着面层或铺装层厚度、模量的增加而相应地变小，随着半刚性基层厚度与模量的增加而变大。以上抗剪影响因素及变化规律的研究为解决车辙问题提供了一定的理论基础。
Maximum holding endurance time: Effects of load and load's center of gravity height.
Lee, Tzu-Hsien
2015-01-01
Manual holding task is a potential risk to the development of musculoskeletal injuries since it is prone to induce localized muscle fatigue. Maximum holding endurance time is a significant parameter for the design of manual holding task. This study aimed to examine the effects of load and load's COG height on maximum holding endurance time. Fifteen young and healthy males were recruited as participants. A factorial design was used to examine the effects of load and load's COG height on maximum holding endurance time. Four levels of load (15% , 30% , 45% and 60% of the participant's maximum holding capacity) and two levels of load's COG height in box (0 cm and 40 cm high from the handle position) were examined. Maximum holding endurance time decreased with increasing load and/or increasing load's COG height. The effect of load's COG height on maximum holding endurance time decreased with increasing load. Load, load's COG height, and the interaction of load and load's COG height significantly affected maximum holding endurance time. Practitioners should realize the effects of load, load's COG height, and the interaction of load and load's COG height on maximum holding endurance time when setting the working conditions of holding tasks.
Proposed Closing Order : St. Vincent
US Fish and Wildlife Service, Department of the Interior — The attached letter directed to Secretary Morton from the Florida Chapter of The Nature Conservancy recommends the establishment of a Secretarial closing order on...
Pollution hazard closes neutrino lab
Jones, Nicola
2003-01-01
"A leading astrophysics laboratory in Italy has closed down all but one of its experiments over concerns that toxic polluants could leak form the underground lab into the local water supply" (0.5 page)
Koehler, P. E.; Bečvář, F.; Krtička, M.; Harvey, J. A.; Guber, K. H.
2011-01-01
A recent Letter attempted to reconcile the disagreement between neutron resonance data and random matrix theory (RMT). To this end, a new formula was derived for transforming measured ({\\Gamma}_{{\\lambda}n}) to reduced ({\\Gamma}_{{\\lambda}n}^0) neutron widths for s-wave resonances ({\\lambda}=1,2,...) in nuclides near peaks of the s-wave neutron strength function. In this Comment, we show that such a rescaling would not, in general, be expected to reconcile the type of disagreement observed, a...
Koehler, P E; Krtička, M; Harvey, J A; Guber, K H
2011-01-01
A recent Letter attempted to reconcile the disagreement between neutron resonance data and random matrix theory (RMT). To this end, a new formula was derived for transforming measured ({\\Gamma}_{{\\lambda}n}) to reduced ({\\Gamma}_{{\\lambda}n}^0) neutron widths for s-wave resonances ({\\lambda}=1,2,...) in nuclides near peaks of the s-wave neutron strength function. In this Comment, we show that such a rescaling would not, in general, be expected to reconcile the type of disagreement observed, and demonstrate that indeed it does not for the specific cases in question. Hence, the disagreements between RMT and these data remain.
Self-closing shielded container for use with radioactive materials
Smith, J.E.
A container for storage of radioactive material comprises a container body and a closure member. The closure member is coupled to the container body to enable the closure body to move automatically from a first position (e.g., closed) to a second position (open).
Positional information, in bits.
Dubuis, Julien O; Tkacik, Gasper; Wieschaus, Eric F; Gregor, Thomas; Bialek, William
2013-10-08
Cells in a developing embryo have no direct way of "measuring" their physical position. Through a variety of processes, however, the expression levels of multiple genes come to be correlated with position, and these expression levels thus form a code for "positional information." We show how to measure this information, in bits, using the gap genes in the Drosophila embryo as an example. Individual genes carry nearly two bits of information, twice as much as would be expected if the expression patterns consisted only of on/off domains separated by sharp boundaries. Taken together, four gap genes carry enough information to define a cell's location with an error bar of ~1 along the anterior/posterior axis of the embryo. This precision is nearly enough for each cell to have a unique identity, which is the maximum information the system can use, and is nearly constant along the length of the embryo. We argue that this constancy is a signature of optimality in the transmission of information from primary morphogen inputs to the output of the gap gene network.
An approximate, maximum terminal velocity descent to a point
Eisler, G.R.; Hull, D.G.
1987-01-01
No closed form control solution exists for maximizing the terminal velocity of a hypersonic glider at an arbitrary point. As an alternative, this study uses neighboring extremal theory to provide a sampled data feedback law to guide the vehicle to a constrained ground range and altitude. The guidance algorithm is divided into two parts: 1) computation of a nominal, approximate, maximum terminal velocity trajectory to a constrained final altitude and computation of the resulting unconstrained groundrange, and 2) computation of the neighboring extremal control perturbation at the sample value of flight path angle to compensate for changes in the approximate physical model and enable the vehicle to reach the on-board computed groundrange. The trajectories are characterized by glide and dive flight to the target to minimize the time spent in the denser parts of the atmosphere. The proposed on-line scheme successfully brings the final altitude and range constraints together, as well as compensates for differences in flight model, atmosphere, and aerodynamics at the expense of guidance update computation time. Comparison with an independent, parameter optimization solution for the terminal velocity is excellent. 6 refs., 3 figs.
Inferential permutation tests for maximum entropy models in ecology.
Shipley, Bill
2010-09-01
Maximum entropy (maxent) models assign probabilities to states that (1) agree with measured macroscopic constraints on attributes of the states and (2) are otherwise maximally uninformative and are thus as close as possible to a specified prior distribution. Such models have recently become popular in ecology, but classical inferential statistical tests require assumptions of independence during the allocation of entities to states that are rarely fulfilled in ecology. This paper describes a new permutation test for such maxent models that is appropriate for very general prior distributions and for cases in which many states have zero abundance and that can be used to test for conditional relevance of subsets of constraints. Simulations show that the test gives correct probability estimates under the null hypothesis. Power under the alternative hypothesis depends primarily on the number and strength of the constraints and on the number of states in the model; the number of empty states has only a small effect on power. The test is illustrated using two empirical data sets to test the community assembly model of B. Shipley, D. Vile, and E. Garnier and the species abundance distribution models of S. Pueyo, F. He, and T. Zillio.
Maximum likelihood estimation for semiparametric density ratio model.
Diao, Guoqing; Ning, Jing; Qin, Jing
2012-06-27
In the statistical literature, the conditional density model specification is commonly used to study regression effects. One attractive model is the semiparametric density ratio model, under which the conditional density function is the product of an unknown baseline density function and a known parametric function containing the covariate information. This model has a natural connection with generalized linear models and is closely related to biased sampling problems. Despite the attractive features and importance of this model, most existing methods are too restrictive since they are based on multi-sample data or conditional likelihood functions. The conditional likelihood approach can eliminate the unknown baseline density but cannot estimate it. We propose efficient estimation procedures based on the nonparametric likelihood. The nonparametric likelihood approach allows for general forms of covariates and estimates the regression parameters and the baseline density simultaneously. Therefore, the nonparametric likelihood approach is more versatile than the conditional likelihood approach especially when estimation of the conditional mean or other quantities of the outcome is of interest. We show that the nonparametric maximum likelihood estimators are consistent, asymptotically normal, and asymptotically efficient. Simulation studies demonstrate that the proposed methods perform well in practical settings. A real example is used for illustration.
Maximum likelihood sequence estimation for optical complex direct modulation.
Che, Di; Yuan, Feng; Shieh, William
2017-04-17
Semiconductor lasers are versatile optical transmitters in nature. Through the direct modulation (DM), the intensity modulation is realized by the linear mapping between the injection current and the light power, while various angle modulations are enabled by the frequency chirp. Limited by the direct detection, DM lasers used to be exploited only as 1-D (intensity or angle) transmitters by suppressing or simply ignoring the other modulation. Nevertheless, through the digital coherent detection, simultaneous intensity and angle modulations (namely, 2-D complex DM, CDM) can be realized by a single laser diode. The crucial technique of CDM is the joint demodulation of intensity and differential phase with the maximum likelihood sequence estimation (MLSE), supported by a closed-form discrete signal approximation of frequency chirp to characterize the MLSE transition probability. This paper proposes a statistical method for the transition probability to significantly enhance the accuracy of the chirp model. Using the statistical estimation, we demonstrate the first single-channel 100-Gb/s PAM-4 transmission over 1600-km fiber with only 10G-class DM lasers.
LANDFILL OPERATION FOR CARBON SEQUESTRATION AND MAXIMUM METHANE EMISSION CONTROL
Don Augenstein
2001-02-01
The work described in this report, to demonstrate and advance this technology, has used two demonstration-scale cells of size (8000 metric tons [tonnes]), sufficient to replicate many heat and compaction characteristics of larger ''full-scale'' landfills. An enhanced demonstration cell has received moisture supplementation to field capacity. This is the maximum moisture waste can hold while still limiting liquid drainage rate to minimal and safely manageable levels. The enhanced landfill module was compared to a parallel control landfill module receiving no moisture additions. Gas recovery has continued for a period of over 4 years. It is quite encouraging that the enhanced cell methane recovery has been close to 10-fold that experienced with conventional landfills. This is the highest methane recovery rate per unit waste, and thus progress toward stabilization, documented anywhere for such a large waste mass. This high recovery rate is attributed to moisture, and elevated temperature attained inexpensively during startup. Economic analyses performed under Phase I of this NETL contract indicate ''greenhouse cost effectiveness'' to be excellent. Other benefits include substantial waste volume loss (over 30%) which translates to extended landfill life. Other environmental benefits include rapidly improved quality and stabilization (lowered pollutant levels) in liquid leachate which drains from the waste.
CMB Maximum Temperature Asymmetry Axis: Alignment with Other Cosmic Asymmetries
Mariano, Antonio
2012-01-01
We use a global pixel based estimator to identify the axis of the residual Maximum Temperature Asymmetry (MTA) (after the dipole subtraction) of the WMAP 7 year Internal Linear Combination (ILC) CMB temperature sky map. The estimator is based on considering the temperature differences between opposite pixels in the sky at various angular resolutions (4 degrees-15 degrees and selecting the axis that maximizes this difference. We consider three large scale Healpix resolutions (N_{side}=16 (3.7 degrees), N_{side}=8 (7.3 degrees) and N_{side}=4 (14.7 degrees)). We compare the direction and magnitude of this asymmetry with three other cosmic asymmetry axes (\\alpha dipole, Dark Energy Dipole and Dark Flow) and find that the four asymmetry axes are abnormally close to each other. We compare the observed MTA axis with the corresponding MTA axes of 10^4 Gaussian isotropic simulated ILC maps (based on LCDM). The fraction of simulated ILC maps that reproduces the observed magnitude of the MTA asymmetry and alignment wit...
A polynomial algorithm for abstract maximum flow
McCormick, S.T. [Univ. of British Columbia, Vancouver, British Columbia (Canada)
1996-12-31
Ford and Fulkerson`s original 1956 max flow/min cut paper formulated max flow in terms of flows on paths, rather than the more familiar flows on arcs. In 1974 Hoffman pointed out that Ford and Fulkerson`s original proof was quite abstract, and applied to a wide range of max flow-like problems. In this abstract model we have capacitated elements, and linearly ordered subsets of elements called paths. When two paths share an element ({open_quote}cross{close_quote}), then there must be a path that is a subset of the first path up to the cross, and a subset of the second path after the cross. (Hoffman`s generalization of) Ford and Fulkerson`s proof showed that the max flow/min cut theorem still holds under this weak assumption. However, this proof is non-constructive. To get an algorithm, we assume that we have an oracle whose input is an arbitrary subset of elements, and whose output is either a path contained in that subset, or the statement that no such path exists. We then use complementary slackness to show how to augment any feasible set of path flows to a set with a strictly larger total flow value using a polynomial number of calls to the oracle. Then standard scaling techniques yield an overall polynomial algorithm for finding both a max flow and a min cut. Hoffman`s paper actually considers a sort of supermodular objective on the path flows, which allows him to include transportation problems and thus rain-cost flow in his frame-work. We also discuss extending our algorithm to this more general case.
Closed String Tachyon: Inflation and Cosmological Collapse
Escamilla-Rivera, Celia; Loaiza-Brito, Oscar; Obregon, Octavio
2011-01-01
By compactifying a critical bosonic string theory on an internal non-flat space with a constant volume, we study the role played by the closed string tachyon in the cosmology of the effective four-dimensional space-time. The effective tachyon potential consists on a negative constant related to the internal curvature space and a polynomial with only quadratic and quartic terms of the tachyon field. Based on it, we present a solution for the tachyon field and the scale factor, which describes an accelerated universe which expands to a maximum value before collapsing. At early times, the closed string tachyon potential behaves as a cosmological constant driving the Universe to an expansion. The value of the cosmological constant is determined by the curvature of the internal space which also fixes the value of the vacuum energy. As time evolves, inflation is present in our models, and it finishes long before the collapsing. At late times, we show that the collapse of the Universe starts as soon as the tachyon f...
The Prediction of Maximum Amplitudes of Solar Cycles and the Maximum Amplitude of Solar Cycle 24
无
2002-01-01
We present a brief review of predictions of solar cycle maximum ampli-tude with a lead time of 2 years or more. It is pointed out that a precise predictionof the maximum amplitude with such a lead-time is still an open question despiteprogress made since the 1960s. A method of prediction using statistical character-istics of solar cycles is developed: the solar cycles are divided into two groups, ahigh rising velocity (HRV) group and a low rising velocity (LRV) group, dependingon the rising velocity in the ascending phase for a given duration of the ascendingphase. The amplitude of Solar Cycle 24 can be predicted after the start of thecycle using the formula derived in this paper. Now, about 5 years before the startof the cycle, we can make a preliminary prediction of 83.2-119.4 for its maximumamplitude.
Application of Multi-information Fusion Positioning Technology in Robot Positioning System
Chang Xu
2014-03-01
Full Text Available Against to the presence of high complexity, low accuracy and a smaller range of positioning in traditional positioning technologies (WLAN, RFID and visual positioning technology, it presents the multi-information fusion positioning technology. The technology takes full advantage of WLAN, RFID and visual positioning technology which chooses Kalman filter for WLAN and RFID information fusion location, and uses visual for positioning after close to the target. Experimental results show that: This technology reduces deviations of WLAN, RFID and visual positioning technology during alone positioning, improves positional accuracy and better meets the positioned requirements of indoor mobile robots.
Finzi Simone
1999-10-01
Full Text Available Objetivo: Os estrabismos horizontais essenciais estão freqüentemente associados a desvios verticais. A patogênese desse desvio vertical pode resultar da disfunção de músculos retos verticais, de músculos oblíquos ou da combinação de ambos. Na presença de hiperfunção do músculo oblíquo superior (OS, nota-se hipotropia (HoT na posição primária do olhar (PPO. O presente estudo objetivou avaliar a magnitude da correção da HoT, na PPO, mediante a tenectomia unilateral do OS.Pacientes e Método: Foi realizado um estudo retrospectivo, 1977 a 1996, de 15 pacientes portadores de hiperfunção unilateral do OS e hipotropia na posição primária do olhar maior que 4D , submetidos a tenectomia unilateral do OS, realizada na Santa Casa de São Paulo (12 pacientes, Universidade de Santo Amaro (2 pacientes e na clínica particular de um dos autores (CSD, 1 paciente. A média de desvio pré-operatória era de 9D . A hiperfunção média pré-operatória do músculo obliquo superior era 1,7 cruzes. Resultados: A correção média da HoT obtida foi de 4,67D ± 5,09D (-5D a 15D, (H = 6,032; p = 0,014. A modificação média da hiperfunção do OS foi de 0,87 ± 0,88 cruzes (0 a 2 cruzes. De acordo com o desvio horizontal, ET e XT, não houve diferença estatisticamente significante na comparação entre os resultados obtidos na correção da HoT. Comentários: Os resultados revelaram que para HoT até 15D na PPO, houve em média correção de 51,82% do seu valor pré-operatório. Para a amostra estudada, a técnica de tenectomia unilateral do OS mostrou-se eficaz na correção do desvio vertical na posição primária do olhar.Purpose: Horizontal strabismus is commonly associated with vertical deviations which can be a result of a dysfunction of the vertical rectus, oblique muscle or both. Overaction of the superior oblique muscle (SO results in hypotropia (HoT in primary position of gaze (PP. The aim of this study was to evaluate the
Speckle interferometric observations of close binary stars
Saha, S K; Yeswanth, L; Anbazhagan, P
2002-01-01
Speckle interferometric technique is employed to record a series of hundreds of short-exposure images of several close binary stars with sub-arcsecond separation through a narrow band filter at the Cassegrain focus of the 2.34 meter (m) Vainu Bappu telescope (VBT), situated at Vainu Bappu Observatory (VBO), Kavalur, India. The data are recorded sequentially by a Peltier-cooled intensified CCD camera with 10 ms exposure. The auto-correlation method is applied to determine the angular separations and position angles of these binary systems.
Novel passive normally closed microfluidic valve
Land, K
2009-09-01
Full Text Available ’ represents the distance by which the membrane is depressed before actuation. This stretches the membrane to give it a pre-tension. Thus, when the pressure is removed from the inlet, the membrane returns to its original position, thereby closing the valve.... This also determines the pressure, pcritical, required to depress the membrane for actuation. Actuation occurs once the pressure from the input fluid reaches pcritical, the membrane is depressed and fluid flows freely from the inlet to the outlet. A...
Maximum likelihood tuning of a vehicle motion filter
Trankle, Thomas L.; Rabin, Uri H.
1990-01-01
This paper describes the use of maximum likelihood parameter estimation unknown parameters appearing in a nonlinear vehicle motion filter. The filter uses the kinematic equations of motion of a rigid body in motion over a spherical earth. The nine states of the filter represent vehicle velocity, attitude, and position. The inputs to the filter are three components of translational acceleration and three components of angular rate. Measurements used to update states include air data, altitude, position, and attitude. Expressions are derived for the elements of filter matrices needed to use air data in a body-fixed frame with filter states expressed in a geographic frame. An expression for the likelihood functions of the data is given, along with accurate approximations for the function's gradient and Hessian with respect to unknown parameters. These are used by a numerical quasi-Newton algorithm for maximizing the likelihood function of the data in order to estimate the unknown parameters. The parameter estimation algorithm is useful for processing data from aircraft flight tests or for tuning inertial navigation systems.
On Geometric Upper Bounds for Positioning Algorithms in Wireless Sensor Networks
Gholami, Mohammad Reza; Wymeersch, Henk; Rydström, Mats
2012-01-01
This paper studies the possibility of upper bounding the position error of an estimate for range based positioning algorithms in wireless sensor networks. In this study, we argue that in certain situations when the measured distances between sensor nodes are positively biased, e.g., in non-line-of-sight conditions, the target node is confined to a closed bounded convex set (a feasible set) which can be derived from the measurements. Then, we formulate two classes of geometric upper bounds with respect to the feasible set. If an estimate is available, either feasible or infeasible, the worst-case position error can be defined as the maximum distance between the estimate and any point in the feasible set (the first bound). Alternatively, if an estimate given by a positioning algorithm is always feasible, we propose to get the maximum length of the feasible set as the worst-case position error (the second bound). These bounds are formulated as nonconvex optimization problems. To progress, we relax the nonconvex ...
Pattern formation, logistics, and maximum path probability
Kirkaldy, J. S.
1985-05-01
The concept of pattern formation, which to current researchers is a synonym for self-organization, carries the connotation of deductive logic together with the process of spontaneous inference. Defining a pattern as an equivalence relation on a set of thermodynamic objects, we establish that a large class of irreversible pattern-forming systems, evolving along idealized quasisteady paths, approaches the stable steady state as a mapping upon the formal deductive imperatives of a propositional function calculus. In the preamble the classical reversible thermodynamics of composite systems is analyzed as an externally manipulated system of space partitioning and classification based on ideal enclosures and diaphragms. The diaphragms have discrete classification capabilities which are designated in relation to conserved quantities by descriptors such as impervious, diathermal, and adiabatic. Differentiability in the continuum thermodynamic calculus is invoked as equivalent to analyticity and consistency in the underlying class or sentential calculus. The seat of inference, however, rests with the thermodynamicist. In the transition to an irreversible pattern-forming system the defined nature of the composite reservoirs remains, but a given diaphragm is replaced by a pattern-forming system which by its nature is a spontaneously evolving volume partitioner and classifier of invariants. The seat of volition or inference for the classification system is thus transferred from the experimenter or theoretician to the diaphragm, and with it the full deductive facility. The equivalence relations or partitions associated with the emerging patterns may thus be associated with theorems of the natural pattern-forming calculus. The entropy function, together with its derivatives, is the vehicle which relates the logistics of reservoirs and diaphragms to the analog logistics of the continuum. Maximum path probability or second-order differentiability of the entropy in isolation are
Direct tests of micro channel plates as the active element of a new shower maximum detector
Ronzhin, A., E-mail: ronzhin@fnal.gov [Fermilab, Batavia, IL 60510 (United States); Los, S.; Ramberg, E. [Fermilab, Batavia, IL 60510 (United States); Apresyan, A.; Xie, S.; Spiropulu, M. [California Institute of Technology, Pasadena, CA (United States); Kim, H. [University of Chicago, Chicago, IL 60637 (United States)
2015-09-21
We continue the study of micro channel plates (MCP) as the active element of a shower maximum (SM) detector. We present below test beam results obtained with MCPs detecting directly secondary particles of an electromagnetic shower. The MCP efficiency to shower particles is close to 100%. The time resolution obtained for this new type of the SM detector is at the level of 40 ps.
Maximum detection range limitation of pulse laser radar with Geiger-mode avalanche photodiode array
Luo, Hanjun; Xu, Benlian; Xu, Huigang; Chen, Jingbo; Fu, Yadan
2015-05-01
When designing and evaluating the performance of laser radar system, maximum detection range achievable is an essential parameter. The purpose of this paper is to propose a theoretical model of maximum detection range for simulating the Geiger-mode laser radar's ranging performance. Based on the laser radar equation and the requirement of the minimum acceptable detection probability, and assuming the primary electrons triggered by the echo photons obey Poisson statistics, the maximum range theoretical model is established. By using the system design parameters, the influence of five main factors, namely emitted pulse energy, noise, echo position, atmospheric attenuation coefficient, and target reflectivity on the maximum detection range are investigated. The results show that stronger emitted pulse energy, lower noise level, more front echo position in the range gate, higher atmospheric attenuation coefficient, and higher target reflectivity can result in greater maximum detection range. It is also shown that it's important to select the minimum acceptable detection probability, which is equivalent to the system signal-to-noise ratio for producing greater maximum detection range and lower false-alarm probability.
Neuromuscular determinants of maximum walking speed in well-functioning older adults.
Clark, David J; Manini, Todd M; Fielding, Roger A; Patten, Carolynn
2013-03-01
Maximum walking speed may offer an advantage over usual walking speed for clinical assessment of age-related declines in mobility function that are due to neuromuscular impairment. The objective of this study was to determine the extent to which maximum walking speed is affected by neuromuscular function of the lower extremities in older adults. We recruited two groups of healthy, well functioning older adults who differed primarily on maximum walking speed. We hypothesized that individuals with slower maximum walking speed would exhibit reduced lower extremity muscle size and impaired plantarflexion force production and neuromuscular activation during a rapid contraction of the triceps surae muscle group (soleus (SO) and gastrocnemius (MG)). All participants were required to have usual 10-meter walking speed of >1.0m/s. If the difference between usual and maximum 10m walking speed was 0.6m/s, the individual was assigned to the "Faster" group (n=12). Peak rate of force development (RFD) and rate of neuromuscular activation (rate of EMG rise) of the triceps surae muscle group were assessed during a rapid plantarflexion movement. Muscle cross sectional area of the right triceps surae, quadriceps and hamstrings muscle groups was determined by magnetic resonance imaging. Across participants, the difference between usual and maximal walking speed was predominantly dictated by maximum walking speed (r=.85). We therefore report maximum walking speed (1.76 and 2.17m/s in Slower and Faster, ptriceps surae (p=.44), quadriceps (p=.76) and hamstrings (p=.98). MG rate of EMG rise was positively associated with RFD and maximum 10m walking speed, but not the usual 10m walking speed. These findings support the conclusion that maximum walking speed is limited by impaired neuromuscular force and activation of the triceps surae muscle group. Future research should further evaluate the utility of maximum walking speed for use in clinical assessment to detect and monitor age
Crafting Creative Nonfiction: From Close Reading to Close Writing
Dollins, Cynthia A.
2016-01-01
A process writing project in a third-grade classroom explored the idea of using nonfiction mentor texts to assist students in writing their own creative informational texts about animals. By looking at author craft and structure during close reading activities with nonfiction Twin Texts, students were taught how to emulate these techniques in…
Maximum Matchings of a Digraph Based on the Largest Geometric Multiplicity
Yunyun Yang
2016-01-01
Full Text Available Matching theory is one of the most forefront issues of graph theory. Based on the largest geometric multiplicity, we develop an efficient approach to identify maximum matchings in a digraph. For a given digraph, it has been proved that the number of maximum matched nodes has close relationship with the largest geometric multiplicity of the transpose of the adjacency matrix. Moreover, through fundamental column transformations, we can obtain the matched nodes and related matching edges. In particular, when a digraph contains a cycle factor, the largest geometric multiplicity is equal to one. In this case, the maximum matching is a perfect matching and each node in the digraph is a matched node. The method is validated by an example.
Zebbiche Toufik
2014-09-01
Full Text Available The presented work is to develop a numerical computation program to determine the distribution of the shear stress to shear in closed tubes with asymmetric single thin wall section with a constant thickness and applications to airfoils and therefore determining the position and value of the maximum stress. In the literature, there are exact analytical solutions only for some sections of simple geometries such as circular section. Hence our interest is focused on the search of approximate numerical solutions for more complex sections used in aeronautics. In the second stage the position of the shear center is determined so that the section does not undergo torsion. The analytic function of the boundary of the airfoil is obtained by using the cubic spline interpolation since it is given in the form of tabulated points.
Cardiorespiratory Fitness of Inmates of a Maximum Security Prison ...
USER
Maximum Security Prison; and also to determine the effects of age, gender, and period of incarceration on CRF. A total of 247 apparently healthy inmates of Maiduguri Maximum Security ... with different types of cardiovascular and metabolic.
Maximum likelihood polynomial regression for robust speech recognition
LU Yong; WU Zhenyang
2011-01-01
The linear hypothesis is the main disadvantage of maximum likelihood linear re- gression （MLLR）. This paper applies the polynomial regression method to model adaptation and establishes a nonlinear model adaptation algorithm using maximum likelihood polyno
Anon.
1995-12-31
If an electric utility holds a monopoly position in a local government district due to a valid demarcation agreement, its attempt to ty payment of the maximum permissible franchise fee to the local government to premature conclusion of a follow-up agreement for a term of 20 years is an infringement of section 26, sub-sec. 2 GWB (law against restraints on competition). The electric utility in this case is liable according to sections 26, sub-sec.2, 35, sub-sec. 1 GWB to pay compensation to the local government amounting to the difference between the maximum permissible franchise fees and the fees actually paid by the utility. (orig.) [Deutsch] Verfuegt ein Elektrizitaetsversorgungsunternehmen infolge eines bestehenden Demarkationsvertrages ueber ein Versorgungsmonopol auf dem Gebiet einer Gemeinde, so verstoesst sein Verhalten, die Zahlung der hoechstzulaessigen Konzessionsabgabe an diese Gemeinde an den vorzeitigen Abschluss eines neuen Konzessionsvertrages mit 20jaehriger Laufzeit zu koppeln, gegen Para. 26 Abs. 2 GWB. Das Versorgungsunternehmen ist in einem solchen Falle gemaess Para. 26 Abs. 2, 35 Abs. 1 GWB zum Ersatz des der Gemeinde entstandenen Schadens in Hoehe der Differenz zwischen den hoechstzulaessigen Konzessionsabgaben und den von dem Versorgungsunternehmen gezahlten Betraegen verpflichtet. (orig.)
From closed-loop to sustainable suplly chains: the WEEE case
Quariguasi Frota Neto, J.; Walther, G.; Bloemhof, J.M.; Nunen, van J.A.E.E.; Spengler, T.
2010-01-01
The primary objective of closed-loop supply chains (CLSC) is to improve the maximum economic benefit from end-of-use products. Nevertheless, the literature within this stream of research advocates that closing the loop also helps to mitigate the undesirable environmental footprint of supply chains.
From Closed-Loop to Sustainable Supply Chains: The WEEE case
J. Quariguasi Frota Neto (João); G. Walther; J.M. Bloemhof-Ruwaard (Jacqueline); J.A.E.E. van Nunen (Jo); T. Spengler
2007-01-01
textabstractThe primary objective of closed-loop supply chains (CLSC) is to reap the maximum economic benefit from end-of-use products. Nevertheless, literature within this stream of research advocates that closing the loop helps to mitigate the undesirable footprint of supply chains. In this paper
Maximum Range of a Projectile Thrown from Constant-Speed Circular Motion
Poljak, Nikola
2016-11-01
The problem of determining the angle θ at which a point mass launched from ground level with a given speed v0 will reach a maximum distance is a standard exercise in mechanics. There are many possible ways of solving this problem, leading to the well-known answer of θ = π/4, producing a maximum range of D max = v0 2 / g , with g being the free-fall acceleration. Conceptually and calculationally more difficult problems have been suggested to improve student proficiency in projectile motion, with the most famous example being the Tarzan swing problem. The problem of determining the maximum distance of a point mass thrown from constant-speed circular motion is presented and analyzed in detail in this text. The calculational results confirm several conceptually derived conclusions regarding the initial throw position and provide some details on the angles and the way of throwing (underhand or overhand) that produce the maximum throw distance.
无
2006-01-01
The complete small subunit rRNA (SSrRNA) gene sequence of a marine ciliate, Dysteria derouxi Gong and Song, 2004, was determined to be of 1 708 nucleotides. The phylogenetic position of this species within the class Phyllopharyngea was deduced using distance matrix, maximum parsimony and maximum likelihood methods. Dysteria derouxi, together with other available ciliates of the class Phyllopharyngea, forms a monophyletic clade with strong bootstrap support in the distance matrix, maximum parsimony and likelihood tree construction methods, while the dysterids are, as a monophyletic group, phylogenetically close to the clade of chlamydodontids [values of 100% LS(least-squares), 100% NJ(neighbor-joining)]. In addition, the trees indicate that dysteriids may be a higher or specialized group within the class, which corresponds well to the morphology and infraciliature.
Krüger, Peter; Wildermuth, Stephan; Hofferberth, Sebastian
2005-01-01
Microscopic atom optical devices integrated on atom chips allow to precisely control and manipulate ultra-cold (T atoms and Bose-Einstein condensates (BECs) close to surfaces. The relevant energy scale of a BEC is extremely small (down to ... be utilized as a sensor for variations of the potential energy of the atoms close to the surface. Here we describe how to use trapped atoms as a measurement device and analyze the performance and flexibility of the field sensor. We demonstrate microscopic magnetic imaging with simultaneous high spatial...
Evolution of Close Binary Systems
Yakut, K; Eggleton, P
2005-01-24
We collected data on the masses, radii, etc. of three classes of close binary stars: low-temperature contact binaries (LTCBs), near-contact binaries (NCBs), and detached close binaries (DCBs). They restrict themselves to systems where (1) both components are, at least arguably, near the Main Sequence, (2) the periods are less than a day, and (3) there is both spectroscopic and photometric analysis leading to reasonably reliable data. They discuss the possible evolutionary connections between these three classes, emphasizing the roles played by mass loss and angular momentum loss in rapidly-rotating cool stars.
Benjamin T. Cooper, MD; Xiaochun Li, PhD; Samuel M. Shin, MD; Aram S. Modrek, BS; Howard C. Hsu, MD; J.K. DeWyngaert, PhD; Gabor Jozsef, PhD; Stella C. Lymberis, MD; Judith D. Goldberg, ScD; Silvia C. Formenti, MD
2016-01-01
Purpose: Maximum dose to the left anterior descending artery (LADmax) is an important physical constraint to reduce the risk of cardiovascular toxicity. We generated a simple algorithm to guide the positioning of the tangent fields to reliably maintain LADmax
M. Mihelich
2014-11-01
Full Text Available We derive rigorous results on the link between the principle of maximum entropy production and the principle of maximum Kolmogorov–Sinai entropy using a Markov model of the passive scalar diffusion called the Zero Range Process. We show analytically that both the entropy production and the Kolmogorov–Sinai entropy seen as functions of f admit a unique maximum denoted fmaxEP and fmaxKS. The behavior of these two maxima is explored as a function of the system disequilibrium and the system resolution N. The main result of this article is that fmaxEP and fmaxKS have the same Taylor expansion at first order in the deviation of equilibrium. We find that fmaxEP hardly depends on N whereas fmaxKS depends strongly on N. In particular, for a fixed difference of potential between the reservoirs, fmaxEP(N tends towards a non-zero value, while fmaxKS(N tends to 0 when N goes to infinity. For values of N typical of that adopted by Paltridge and climatologists (N ≈ 10 ~ 100, we show that fmaxEP and fmaxKS coincide even far from equilibrium. Finally, we show that one can find an optimal resolution N* such that fmaxEP and fmaxKS coincide, at least up to a second order parameter proportional to the non-equilibrium fluxes imposed to the boundaries. We find that the optimal resolution N* depends on the non equilibrium fluxes, so that deeper convection should be represented on finer grids. This result points to the inadequacy of using a single grid for representing convection in climate and weather models. Moreover, the application of this principle to passive scalar transport parametrization is therefore expected to provide both the value of the optimal flux, and of the optimal number of degrees of freedom (resolution to describe the system.
Beta relaxation of nonpolymeric liquids close to the glass transition
Olsen, Niels Boye; Christensen, Tage Emil; Dyre, Jeppe
2000-01-01
Dielectric beta relaxation in a pyridine-toluene solution is studied close to the glass transition. Loss peak frequency and maximum loss both exhibit thermal hysteresis. An annealing-state-independent parameter involving loss and loss peak frequency is identified. This parameter has a simple Arrh...... Arrhenius temperature dependence. The same behavior is found for four other viscous liquids, indicating that the phenomenon is possibly general....
20 CFR 617.14 - Maximum amount of TRA.
2010-04-01
... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Maximum amount of TRA. 617.14 Section 617.14... FOR WORKERS UNDER THE TRADE ACT OF 1974 Trade Readjustment Allowances (TRA) § 617.14 Maximum amount of TRA. (a) General rule. Except as provided under paragraph (b) of this section, the maximum amount of...
40 CFR 94.107 - Determination of maximum test speed.
2010-07-01
... specified in 40 CFR 1065.510. These data points form the lug curve. It is not necessary to generate the... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Determination of maximum test speed... Determination of maximum test speed. (a) Overview. This section specifies how to determine maximum test...
14 CFR 25.1505 - Maximum operating limit speed.
2010-01-01
... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Maximum operating limit speed. 25.1505... Operating Limitations § 25.1505 Maximum operating limit speed. The maximum operating limit speed (V MO/M MO airspeed or Mach Number, whichever is critical at a particular altitude) is a speed that may not...
Maximum Performance Tests in Children with Developmental Spastic Dysarthria.
Wit, J.; And Others
1993-01-01
Three Maximum Performance Tasks (Maximum Sound Prolongation, Fundamental Frequency Range, and Maximum Repetition Rate) were administered to 11 children (ages 6-11) with spastic dysarthria resulting from cerebral palsy and 11 controls. Despite intrasubject and intersubject variability in normal and pathological speakers, the tasks were found to be…
Maximum physical capacity testing in cancer patients undergoing chemotherapy
Knutsen, L.; Quist, M; Midtgaard, J
2006-01-01
BACKGROUND: Over the past few years there has been a growing interest in the field of physical exercise in rehabilitation of cancer patients, leading to requirements for objective maximum physical capacity measurement (maximum oxygen uptake (VO(2max)) and one-repetition maximum (1RM)) to determine...
Positional Accuracy Assessment for Effective Shoreline Change ...
Michael
2016-06-01
Jun 1, 2016 ... closely the positions of discrete objects or features are compared to their ..... definition and detection: a review”, Journal of. Coastal Research ... types: An Approach to Modeling and Querying. Moving. Objects in. Databases”,.
Uav Positioning and Collision Avoidance Based on RSS Measurements
Masiero, A.; Fissore, F.; Guarnieri, A.; Pirotti, F.; Vettore, A.
2015-08-01
In recent years, Unmanned Aerial Vehicles (UAVs) are attracting more and more attention in both the research and industrial communities: indeed, the possibility to use them in a wide range of remote sensing applications makes them a very flexible and attractive solution in both civil and commercial cases (e.g. precision agriculture, security and control, monitoring of sites, exploration of areas difficult to reach). Most of the existing UAV positioning systems rely on the use of the GPS signal. Despite this can be a satisfactory solution in open environments where the GPS signal is available, there are several operating conditions of interest where it is unavailable or unreliable (e.g. close to high buildings, or mountains, in indoor environments). Consequently, a different approach has to be adopted in these cases. This paper considers the use ofWiFi measurements in order to obtain position estimations of the device of interest. More specifically, to limit the costs for the devices involved in the positioning operations, an approach based on radio signal strengths (RSS) measurements is considered. Thanks to the use of a Kalman filter, the proposed approach takes advantage of the temporal dynamic of the device of interest in order to improve the positioning results initially provided by means of maximum likelihood estimations. The considered UAVs are assumed to be provided with communication devices, which can allow them to communicate with each other in order to improve their cooperation abilities. In particular, the collision avoidance problem is examined in this work.
Behavior of the Position-Spread Tensor in Diatomic Systems.
Brea, Oriana; El Khatib, Muammar; Angeli, Celestino; Bendazzoli, Gian Luigi; Evangelisti, Stefano; Leininger, Thierry
2013-12-10
The behavior of the Position-Spread Tensor (Λ) in a series of light diatomic molecules (either neutral or negative ions) is investigated at a Full Configuration Interaction level. This tensor, which is the second moment cumulant of the total position operator, is invariant with respect to molecular translations, while its trace is also rotationally invariant. Moreover, the tensor is additive in the case of noninteracting subsystems and can be seen as an intrinsic property of a molecule. In the present work, it is shown that the longitudinal component of the tensor, Λ∥, which is small for internuclear distances close to the equilibrium, tends to grow if the bond is stretched. A maximum is reached in the region of the bond breaking, then Λ∥ decreases and converges toward the isolated-atom value. The degenerate transversal components, Λ⊥, on the other hand, usually have a monotonic growth toward the atomic value. The Position Spread is extremely sensitive to reorganization of the molecular wave function, and it becomes larger in the case of an increase of the electron mobility, as illustrated by the neutral-ionic avoided crossing in LiF. For these reasons, the Position Spread can be an extremely useful property that characterizes the nature of the wave function in a molecular system.
Andra Naresh Kumar Reddy; Dasari Karuna Sagar
2015-01-01
Resolution for the modified point spread function (PSF) of asymmetrically apodized optical systems has been analysed by a new parameter half-width at half-maximum (HWHM) in addition to the well-defined parameter full-width at half-maximum (FWHM). The distribution of half-maximum energy in the centroid of modified PSF has been investigated in terms of HWHM on good side and HWHM on bad side. We observed that as the asymmetry in PSF increases, FWHM of the main peak increases and then decreases and is being aided by the degree of amplitude apodization in the central region of slit functions. In the present study, HWHM (half-width at half-maximum) of the resultant PSF has been defined to characterize the resolution of the detection system. It is essentially a line of projection, which measures the width of the main lobe at its half-maximum position from the diffraction centre and has been computed for various amplitudes and antiphase apodizations of the slit aperture. We have noticed that HWHM on the good side decreases at the cost of the increased HWHM on the bad side in the presence of asymmetric apodization.
Finding Quantitative Trait Loci Genes with Collaborative Targeted Maximum Likelihood Learning.
Wang, Hui; Rose, Sherri; van der Laan, Mark J
2011-07-01
Quantitative trait loci mapping is focused on identifying the positions and effect of genes underlying an an observed trait. We present a collaborative targeted maximum likelihood estimator in a semi-parametric model using a newly proposed 2-part super learning algorithm to find quantitative trait loci genes in listeria data. Results are compared to the parametric composite interval mapping approach.
GS Department
2011-01-01
In connection to the TRAM project, drainage works will be carried out close to gate B until the end of next week. In order to avoid access problems, if arriving by car, please use gates A and E. Department of General Infrastructure Services (GS) GS-SE Group
Changing closed agricultural policy communities
Termeer, C.J.A.M.; Werkman, R.A.
2011-01-01
Agricultural policy networks have served as classic examples of closed policy communities facing pressure to open up. However, attempts to change them are slowly moving forward. The dialogues on Common Agricultural Policy reforms in which the Dutch Ministry of Agriculture is engaged with a range of
Ecological Challenges for Closed Systems
Nelson, Mark; Dempster, William; Allen, John P.
2012-07-01
Closed ecological systems are desirable for a number of purposes. In space life support systems, material closure allows precious life-supporting resources to be kept inside and recycled. Closure in small biospheric systems facilitates detailed measurement of global ecological processes and biogeochemical cycles. Closed testbeds facilitate research topics which require isolation from the outside (e.g. genetically modified organisms; radioisotopes) so their ecological interactions and fluxes can be studied separate from interactions with the outside environment. But to achieve and maintain closure entails solving complex ecological challenges. These challenges include being able to handle faster cycling rates and accentuated daily and seasonal fluxes of critical life elements such as carbon dioxide, oxygen, water, macro- and mico-nutrients. The problems of achieving sustainability in closed systems for life support include how to handle atmospheric dynamics including trace gases, producing a complete human diet and recycling nutrients and maintaining soil fertility, the sustaining of healthy air and water and preventing the loss of crucial elements from active circulation. In biospheric facilities the challenge is also to produce analogues to natural biomes and ecosystems, studying processes of self-organization and adaptation in systems that allow specification or determination of state variables and cycles which may be followed through all interactions from atmosphere to soils. Other challenges include the dynamics and genetics of small populations, the psychological challenges for small isolated human groups and measures and options which may be necessary to ensure long-term operation of closed ecological systems.
Closed surfaces and character varieties
Chesebro, Eric
2012-01-01
The powerful character variety techniques of Culler and Shalen can be used to find essential surfaces in knot manifolds. We show that module structures on the coordinate ring of the character variety can be used to identify detected boundary slopes as well as when closed surfaces are detected. This approach also yields new number theoretic invariants for the character varieties of knot manifolds.
Gardner, Michael
2001-01-01
Describes the planning and design process of "Off the Wall," a student-developed CD-ROM multimedia project about the life and work of artist Chuck Close-the product of a studio-based course in Learning Experiments Design at the University of Georgia. The design includes an element of gaming; text is kept sparse; navigational elements are rendered…
Brookhaven leak reactor to close
MacIlwain, C
1999-01-01
The DOE has announced that the High Flux Beam Reactor at Brookhaven is to close for good. Though the news was not unexpected researchers were angry the decision had been taken before the review to assess the impact of reopening the reactor had been concluded (1 page).
Berry, Vincent; Nicolas, François
2006-01-01
Given a set of evolutionary trees on a same set of taxa, the maximum agreement subtree problem (MAST), respectively, maximum compatible tree problem (MCT), consists of finding a largest subset of taxa such that all input trees restricted to these taxa are isomorphic, respectively compatible. These problems have several applications in phylogenetics such as the computation of a consensus of phylogenies obtained from different data sets, the identification of species subjected to horizontal gene transfers and, more recently, the inference of supertrees, e.g., Trees Of Life. We provide two linear time algorithms to check the isomorphism, respectively, compatibility, of a set of trees or otherwise identify a conflict between the trees with respect to the relative location of a small subset of taxa. Then, we use these algorithms as subroutines to solve MAST and MCT on rooted or unrooted trees of unbounded degree. More precisely, we give exact fixed-parameter tractable algorithms, whose running time is uniformly polynomial when the number of taxa on which the trees disagree is bounded. The improves on a known result for MAST and proves fixed-parameter tractability for MCT.
Prediction of close binarity based on planetary nebula morphology
Miszalski, B; Jones, D; Santander-García, M; Rodríguez-Gil, P; Rubio-Díez, M M
2010-01-01
A thorough search of the OGLE-III microlensing project has more than doubled the total sample of PNe known to have close binary central stars. These discoveries have enabled close binary induced morphological trends to be revealed for the first time. Canonical bipolar nebulae, low-ionisation structures and polar outflows are all identified within the sample and are provisionally associated with binarity. We have embarked upon a large photometric monitoring program using the Flemish Mercator telescope to simultaneously test the predictive power of these morphological features and to find more close binaries. Early results are very positive with at least five binaries found so far. This suggests our method is an effective means to expedite the construction of a statistically significant sample of close binary shaped nebulae. Such an authoritative sample will be essential to quantify the degree to which close binary nuclei may shape PNe.
Condensation theory for finite, closed systems
Donoghue, Edward; Gibbs, Julian H.
1981-03-01
The applicability of Mayer's cluster integral formulation of statistical mechanics in the canonical ensemble has been restricted to the gas phase by two difficulties: the enormous labor required for the calculation of cluster integrals from realistic intermolecular potentials and the divergence of the cluster integral expansions of thermodynamic observables and n-particle correlation functions prior to condensation. In this paper the divergence of the cluster expansions is shown to be due to the way in which the limit of a system of infinite size is taken, implicitly, when the partition function, written as a sum over all the cluster size distributions attainable by the closed system, is approximated by its maximum term alone. The use in condensation theory of this ''maximum term approximation,'' and of the particular infinite limit it entails, are obviated herein by demonstration that the full theory with use of all the terms in the partition function, can be solved conveniently and exactly by recurrence relation (or formal power series) methods. The cluster size distributions thus found, since they describe finite systems, can have no associated divergences. Because no realistic set of volume dependent cluster integrals is known, we demonstrate the new formalism and the use of the recurrence relations in the case of cluster integrals obtained in the infinite volume limit from the virial expansion determined by the van der Waals equation of state. At low densities these are seen to predict correctly the ideal, imperfect, and metastable states of the homogeneous gas phase. Beyond the spinodal density, they predict bimodal cluster size distributions distinctive of coexisting vapor and liquid; the corresponding pressure isotherms are found to be constant, rather than diverging or displaying a van der Waals loop. Because the sole approximation made is the replacement of the volume dependent cluster integrals by their infinite volume limits, this evidently is the cause
Exponentially many maximum genus embeddings and genus embeddings for complete graphs
2008-01-01
There are many results on the maximum genus, among which most are written for the existence of values of such embeddings, and few attention has been paid to the estimation of such embeddings and their applications. In this paper we study the number of maximum genus embeddings for a graph and find an exponential lower bound for such numbers. Our results show that in gen-eral case, a simple connected graph has exponentially many distinct maximum genus embeddings. In particular, a connected cubic graph G of order n always has at least 2~1/2m+n+ α2 distinct maximum genus embeddings, where α and m denote, respectively, the number of inner vertices and odd compo-nents of an optimal tree T . What surprise us most is that such two extremal embeddings (i.e., the maximum genus embeddings and the genus embeddings) are sometimes closely related with each other. In fact, as applications, we show that for a suffcient large natural number n, there are at least C2 n4 dmeapneyn dgienngu os ne mthbee vdadliuneg soffonrocf ormespidleutee 1g2r.a pThh eKsen rwesiuthlt sn i m≡p r4o,v 7e, 1th0e ( mbooudn1d2)s, owbthaeirnee dC b iys Ka ocroznhsikta anncde Voss and the methods used here are much simpler and straight.
Exponentially many maximum genus embeddings and genus embeddings for complete graphs
REN Han; BAI Yun
2008-01-01
There are many results on the maximum genus,among which most are written for the existence of values of such embeddings,and few attention has been paid to the estimation of such embeddings and their applications.In this paper we study the number of maximum genus embeddings for a graph and find an exponential lower bound for such numbers.Our results show that in general case,a simple connected graph has exponentially many distinct maximum genus embeddings.In particular,a connected cubie graph G of order n always has at least (√2)m+n+α/2 distinct maximum genus embeddings,where α and m denote,respectively,the number of inner vertices and odd compo-nents of an optimal tree T.What surprise us most is that such two extremal embeddings (i.e.,the maximum genus embeddings and the genus embeddings) are sometimes closely related with each other.In fact,as applications,we show that for a sufficient large natural number n,there are at least C2n/4 many genus embeddings for complete graph Kn with n=4,7,10 (mod12),where C is a constance depending on the Value of n of residue 12.These results improve the bounds obtained by Korzhik and Voss and the methods used here are much simpler and straight.
Present and Last Glacial Maximum climates as states of maximum entropy production
Herbert, Corentin; Kageyama, Masa; Dubrulle, Berengere
2011-01-01
The Earth, like other planets with a relatively thick atmosphere, is not locally in radiative equilibrium and the transport of energy by the geophysical fluids (atmosphere and ocean) plays a fundamental role in determining its climate. Using simple energy-balance models, it was suggested a few decades ago that the meridional energy fluxes might follow a thermodynamic Maximum Entropy Production (MEP) principle. In the present study, we assess the MEP hypothesis in the framework of a minimal climate model based solely on a robust radiative scheme and the MEP principle, with no extra assumptions. Specifically, we show that by choosing an adequate radiative exchange formulation, the Net Exchange Formulation, a rigorous derivation of all the physical parameters can be performed. The MEP principle is also extended to surface energy fluxes, in addition to meridional energy fluxes. The climate model presented here is extremely fast, needs very little empirical data and does not rely on ad hoc parameterizations. We in...
On the maximum-entropy/autoregressive modeling of time series
Chao, B. F.
1984-01-01
The autoregressive (AR) model of a random process is interpreted in the light of the Prony's relation which relates a complex conjugate pair of poles of the AR process in the z-plane (or the z domain) on the one hand, to the complex frequency of one complex harmonic function in the time domain on the other. Thus the AR model of a time series is one that models the time series as a linear combination of complex harmonic functions, which include pure sinusoids and real exponentials as special cases. An AR model is completely determined by its z-domain pole configuration. The maximum-entropy/autogressive (ME/AR) spectrum, defined on the unit circle of the z-plane (or the frequency domain), is nothing but a convenient, but ambiguous visual representation. It is asserted that the position and shape of a spectral peak is determined by the corresponding complex frequency, and the height of the spectral peak contains little information about the complex amplitude of the complex harmonic functions.
Comparative study of maximum isometric grip strength in different sports
Noé Gomes Borges Junior
2009-06-01
Full Text Available The objective of this study was to compare maximum isometric grip strength (Fmaxbetween different sports and between the dominant (FmaxD and non-dominant (FmaxND hand. Twenty-nine male aikido (AI, jiujitsu (JJ, judo (JU and rowing (RO athletes and 21non-athletes (NA participated in the study. The hand strength test consisted of maintainingmaximum isometric grip strength for 10 seconds using a hand dynamometer. The position of the subjects was that suggested by the American Society of Hand Therapy. Factorial 2X5 ANOVA with Bonferroni correction, followed by a paired t test and Tukey test, was used for statistical analysis. The highest Fmax values were observed for the JJ group when using the dominant hand,followed by the JU, RO, AI and NA groups. Variation in Fmax could be attributed to handdominance (30.9%, sports modality (39.9% and the interaction between hand dominance andsport (21.3%. The present results demonstrated significant differences in Fmax between the JJ and AI groups and between the JJ and NA groups for both the dominant and non-dominant hand. Significant differences in Fmax between the dominant and non-dominant hand were only observed in the AI and NA groups. The results indicate that Fmax can be used for comparisonbetween different sports modalities, and to identify differences between the dominant and nondominanthand. Studies involving a larger number of subjects will permit the identification of differences between other modalities.
Application of the maximum entropy method to profile analysis
Armstrong, N.; Kalceff, W. [University of Technology, Department of Applied Physics, Sydney, NSW (Australia); Cline, J.P. [National Institute of Standards and Technology, Gaithersburg, (United States)
1999-12-01
Full text: A maximum entropy (MaxEnt) method for analysing crystallite size- and strain-induced x-ray profile broadening is presented. This method treats the problems of determining the specimen profile, crystallite size distribution, and strain distribution in a general way by considering them as inverse problems. A common difficulty faced by many experimenters is their inability to determine a well-conditioned solution of the integral equation, which preserves the positivity of the profile or distribution. We show that the MaxEnt method overcomes this problem, while also enabling a priori information, in the form of a model, to be introduced into it. Additionally, we demonstrate that the method is fully quantitative, in that uncertainties in the solution profile or solution distribution can be determined and used in subsequent calculations, including mean particle sizes and rms strain. An outline of the MaxEnt method is presented for the specific problems of determining the specimen profile and crystallite or strain distributions for the correspondingly broadened profiles. This approach offers an alternative to standard methods such as those of Williamson-Hall and Warren-Averbach. An application of the MaxEnt method is demonstrated in the analysis of alumina size-broadened diffraction data (from NIST, Gaithersburg). It is used to determine the specimen profile and column-length distribution of the scattering domains. Finally, these results are compared with the corresponding Williamson-Hall and Warren-Averbach analyses. Copyright (1999) Australian X-ray Analytical Association Inc.
Local solutions of Maximum Likelihood Estimation in Quantum State Tomography
Gonçalves, Douglas S; Lavor, Carlile; Farías, Osvaldo Jiménez; Ribeiro, P H Souto
2011-01-01
Maximum likelihood estimation is one of the most used methods in quantum state tomography, where the aim is to find the best density matrix for the description of a physical system. Results of measurements on the system should match the expected values produced by the density matrix. In some cases however, if the matrix is parameterized to ensure positivity and unit trace, the negative log-likelihood function may have several local minima. In several papers in the field, authors associate a source of errors to the possibility that most of these local minima are not global, so that optimization methods can be trapped in the wrong minimum, leading to a wrong density matrix. Here we show that, for convex negative log-likelihood functions, all local minima are global. We also show that a practical source of errors is in fact the use of optimization methods that do not have global convergence property or present numerical instabilities. The clarification of this point has important repercussion on quantum informat...
Approximate Maximum Likelihood Commercial Bank Loan Management Model
Godwin N.O. Asemota
2009-01-01
Full Text Available Problem statement: Loan management is a very complex and yet, a vitally important aspect of any commercial bank operations. The balance sheet position shows the main sources of funds as deposits and shareholders contributions. Approach: In order to operate profitably, remain solvent and consequently grow, a commercial bank needs to properly manage its excess cash to yield returns in the form of loans. Results: The above are achieved if the bank can honor depositors withdrawals at all times and also grant loans to credible borrowers. This is so because loans are the main portfolios of a commercial bank that yield the highest rate of returns. Commercial banks and the environment in which they operate are dynamic. So, any attempt to model their behavior without including some elements of uncertainty would be less than desirable. The inclusion of uncertainty factor is now possible with the advent of stochastic optimal control theories. Thus, approximate maximum likelihood algorithm with variable forgetting factor was used to model the loan management behavior of a commercial bank in this study. Conclusion: The results showed that uncertainty factor employed in the stochastic modeling, enable us to adaptively control loan demand as well as fluctuating cash balances in the bank. However, this loan model can also visually aid commercial bank managers planning decisions by allowing them to competently determine excess cash and invest this excess cash as loans to earn more assets without jeopardizing public confidence.
Westhoff, M.; Erpicum, S.; Archambeau, P.; Pirotton, M.; Zehe, E.; Dewals, B.
2015-12-01
Power can be performed by a system driven by a potential difference. From a given potential difference, the power that can be subtracted is constraint by the Carnot limit, which follows from the first and second laws of thermodynamics. If the system is such that the flux producing power (with power being the flux times its driving potential difference) also influences the potential difference, a maximum in power can be obtained as a result of the trade-off between the flux and the potential difference. This is referred to as the maximum power principle. It has already been shown that the atmosphere operates close to this maximum power limit when it comes to heat transport from the Equator to the poles, or vertically, from the surface to the atmospheric boundary layer. To reach this state of maximum power, the effective thermal conductivity of the atmosphere is adapted by the creation of convection cells. The aim of this study is to test if the soil's effective hydraulic conductivity also adapts in such a way that it produces maximum power. However, the soil's hydraulic conductivity adapts differently; for example by the creation of preferential flow paths. Here, this process is simulated in a lab experiment, which focuses on preferential flow paths created by piping. In the lab, we created a hydrological analogue to the atmospheric model dealing with heat transport between Equator and poles, with the aim to test if the effective hydraulic conductivity of the sand bed can be predicted with the maximum power principle. The experimental setup consists of two freely draining reservoir connected with each other by a confined aquifer. By adding water to only one reservoir, a potential difference will build up until a steady state is reached. The results will indicate whether the maximum power principle does apply for groundwater flow and how it should be applied. Because of the different way of adaptation of flow conductivity, the results differ from that of the
Murphy, Andrew; Haestad, Jace; Morgan, Thomas
2015-09-01
We report characteristics of closed classical orbits in an electric field in phase space produced in photoabsorption. Rydberg states of atomic and molecular hydrogen and helium are considered. The core potential used for the hydrogen molecule is an effective one electron one center core potential evaluated at the internuclear equilibrium distance. Poincare surfaces of section in phase space are generated by integrating the equations of motion in semiparabolic coordinates u = (r + z) 1 / 2 and v = (r - z) 1 / 2, and plotting the location in phase space (pv versus v) whenever u = 0, with the electric field in the z direction. Combination orbits produced by Rydberg electron core scattering are studied and the evolution in phase space of these combination orbits due to scattering from one closed orbit into another is investigated. Connections are made to measured laser photoabsorption experiments that excite Rydberg states (20 recurrence spectra. The phase space structures responsible for the spectra are identified.
Close supermassive binary black holes
Gaskell, C. Martin
2010-01-01
It has been proposed that when the peaks of the broad emission lines in active galactic nuclei (AGNs) are significantly blueshifted or redshifted from the systemic velocity of the host galaxy, this could be a consequence of orbital motion of a supermassive blackhole binary (SMB). The AGN J1536+0441 (=SDSS J153636.22+044127.0) has recently been proposed as an example of this phenomenon. It is proposed here instead that 1536+044 is an example of line emission from a disc. If this is correct, the lack of clear optical spectral evidence for close SMBs is significant and argues either that the merging of close SMBs is much faster than has generally been hitherto thought, or if the approach is slow, that when the separation of the binary is comparable to the size of the torus and broad-line region, the feeding of the black holes is disrupted.
Morphological sampling of closed sets:
Christian Ronse; Mohamed Tajine
2004-01-01
We briefiy survey the standard morphological approach (Heijmans, 1994) to the sampling (or discretization) of sets. Then we summarize the main results of our metric theory of sampling (Ronse and Tajine, 2000; 2001; 2002; Tajine and Ronse, 2002), which can be used to analyse several sampling schemes, in particular the morphological one. We extend it to the sampling of closed sets (instead of compact ones), and to the case where the sampling subspace is boundedly compact (instead of boundedly f...
Design of Asymmetrical Relay Resonators for Maximum Efficiency of Wireless Power Transfer
Bo-Hee Choi
2016-01-01
Full Text Available This paper presents a new design method of asymmetrical relay resonators for maximum wireless power transfer. A new design method for relay resonators is demanded because maximum power transfer efficiency (PTE is not obtained at the resonant frequency of unit resonator. The maximum PTE for relay resonators is obtained at the different resonances of unit resonator. The optimum design of asymmetrical relay is conducted by both the optimum placement and the optimum capacitance of resonators. The optimum placement is found by scanning the positions of the relays and optimum capacitance can be found by using genetic algorithm (GA. The PTEs are enhanced when capacitance is optimally designed by GA according to the position of relays, respectively, and then maximum efficiency is obtained at the optimum placement of relays. The capacitance of the second resonator to nth resonator and the load resistance should be determined for maximum efficiency while the capacitance of the first resonator and the source resistance are obtained for the impedance matching. The simulated and measured results are in good agreement.
Singh, Harpreet; Arvind; Dorai, Kavita, E-mail: kavita@iisermohali.ac.in
2016-09-07
Estimation of quantum states is an important step in any quantum information processing experiment. A naive reconstruction of the density matrix from experimental measurements can often give density matrices which are not positive, and hence not physically acceptable. How do we ensure that at all stages of reconstruction, we keep the density matrix positive? Recently a method has been suggested based on maximum likelihood estimation, wherein the density matrix is guaranteed to be positive definite. We experimentally implement this protocol on an NMR quantum information processor. We discuss several examples and compare with the standard method of state estimation. - Highlights: • State estimation using maximum likelihood method was performed on an NMR quantum information processor. • Physically valid density matrices were obtained every time in contrast to standard quantum state tomography. • Density matrices of several different entangled and separable states were reconstructed for two and three qubits.
A Note on k-Limited Maximum Base
Yang Ruishun; Yang Xiaowei
2006-01-01
The problem of k-limited maximum base was specified into two special problems of k-limited maximum base; that is, let subset D of the problem of k-limited maximum base be an independent set and a circuit of the matroid, respectively. It was proved that under this circumstance the collections of k-limited base satisfy base axioms. Then a new matroid was determined, and the problem of k-limited maximum base was transformed to the problem of maximum base of this new matroid. Aiming at the problem, two algorithms, which in essence are greedy algorithms based on former matroid, were presented for the two special problems of k-limited maximum base. They were proved to be reasonable and more efficient than the algorithm presented by Ma Zhongfan in view of the complexity of algorithm.
Maximum range of a projectile thrown from constant-speed circular motion
Poljak, Nikola
2016-01-01
The problem of determining the angle at which a point mass launched from ground level with a given speed is a standard exercise in mechanics. Similar, yet conceptually and calculationally more difficult problems have been suggested to improve student proficiency in projectile motion. The problem of determining the maximum distance of a rock thrown from a rotating arm motion is presented and analyzed in detail in this text. The calculational results confirm several conceptually derived conclusions regarding the initial throw position and provide some details on the angles and the way of throwing (underhand or overhand) which produce the maximum throw distance.
An Interval Maximum Entropy Method for Quadratic Programming Problem
RUI Wen-juan; CAO De-xin; SONG Xie-wu
2005-01-01
With the idea of maximum entropy function and penalty function methods, we transform the quadratic programming problem into an unconstrained differentiable optimization problem, discuss the interval extension of the maximum entropy function, provide the region deletion test rules and design an interval maximum entropy algorithm for quadratic programming problem. The convergence of the method is proved and numerical results are presented. Both theoretical and numerical results show that the method is reliable and efficient.
Vertigo - positional; Benign paroxysmal positional vertigo; BPPV: dizziness- positional ... Benign positional vertigo is also called benign paroxysmal positional vertigo (BPPV). It is caused by a problem in the inner ear. ...
Beam positioning error budget in ICF driver
Shi Zhi Quan; Su Jing Qin
2002-01-01
The author presents the method of linear weight sum to beam positioning budget on the basis of ICF request on targeting, the approach of equal or unequal probability to allocate errors to each optical element. Based on the relationship between the motion of the optical components and beam position on target, the position error of the optical components was evaluated, which was referred to as the maximum range. Lots of ray trace were performed, the position error budget were modified by law of the normal distribution. An overview of position error budget of the components is provided
Hutchinson, Thomas H. [Plymouth Marine Laboratory, Prospect Place, The Hoe, Plymouth PL1 3DH (United Kingdom)], E-mail: thom1@pml.ac.uk; Boegi, Christian [BASF SE, Product Safety, GUP/PA, Z470, 67056 Ludwigshafen (Germany); Winter, Matthew J. [AstraZeneca Safety, Health and Environment, Brixham Environmental Laboratory, Devon TQ5 8BA (United Kingdom); Owens, J. Willie [The Procter and Gamble Company, Central Product Safety, 11810 East Miami River Road, Cincinnati, OH 45252 (United States)
2009-02-19
There is increasing recognition of the need to identify specific sublethal effects of chemicals, such as reproductive toxicity, and specific modes of actions of the chemicals, such as interference with the endocrine system. To achieve these aims requires criteria which provide a basis to interpret study findings so as to separate these specific toxicities and modes of action from not only acute lethality per se but also from severe inanition and malaise that non-specifically compromise reproductive capacity and the response of endocrine endpoints. Mammalian toxicologists have recognized that very high dose levels are sometimes required to elicit both specific adverse effects and present the potential of non-specific 'systemic toxicity'. Mammalian toxicologists have developed the concept of a maximum tolerated dose (MTD) beyond which a specific toxicity or action cannot be attributed to a test substance due to the compromised state of the organism. Ecotoxicologists are now confronted by a similar challenge and must develop an analogous concept of a MTD and the respective criteria. As examples of this conundrum, we note recent developments in efforts to validate protocols for fish reproductive toxicity and endocrine screens (e.g. some chemicals originally selected as 'negatives' elicited decreases in fecundity or changes in endpoints intended to be biomarkers for endocrine modes of action). Unless analogous criteria can be developed, the potentially confounding effects of systemic toxicity may then undermine the reliable assessment of specific reproductive effects or biomarkers such as vitellogenin or spiggin. The same issue confronts other areas of aquatic toxicology (e.g., genotoxicity) and the use of aquatic animals for preclinical assessments of drugs (e.g., use of zebrafish for drug safety assessment). We propose that there are benefits to adopting the concept of an MTD for toxicology and pharmacology studies using fish and other aquatic
Optimizing the closed suction surgical drainage system.
Carruthers, Katherine H; Eisemann, Bradley S; Lamp, Susan; Kocak, Ergun
2013-01-01
Closed suction drains are indicated in a wide array of postoperative settings, with many distinct drainage systems available to the surgeon. The purpose of this study was to compare the suction gradients achieved using 2 different sizes of suction reservoirs and 2 different techniques for generating negative pressure. Drainage reservoirs of 100 and 400 ml were chosen to evaluate their ability to achieve suction. Suction was established in both sizes of drains by pressing the sides of the reservoir together or by pushing the bottom of the reservoir toward the top. Negative pressures were recorded with the reservoir empty, and after every 10-ml addition of saline. Averages were graphed to illustrate the applied suction over a range of drain volumes. The 100-ml drainage system reached a peak suction of -117.6 mmHg, while the 400-ml drainage system reached only a peak suction of -71.4 mmHg. Both of the maximum suction readings were achieved using the full-squeeze technique. The bottom-pushed-in technique did not result in any sustained measurable levels of suction using either of the reservoir volumes. Smaller drain reservoirs are more successful in generating a high initial suction than larger reservoirs, especially when the volume of fluid in the drain is relatively low. In all sizes of drains, compressing the sides of the reservoir is a far better technique for establishing negative pressure than pressing the bottom of the drain up toward the top.
Integer Programming Model for Maximum Clique in Graph
YUAN Xi-bo; YANG You; ZENG Xin-hai
2005-01-01
The maximum clique or maximum independent set of graph is a classical problem in graph theory. Combined with Boolean algebra and integer programming, two integer programming models for maximum clique problem,which improve the old results were designed in this paper. Then, the programming model for maximum independent set is a corollary of the main results. These two models can be easily applied to computer algorithm and software, and suitable for graphs of any scale. Finally the models are presented as Lingo algorithms, verified and compared by several examples.
Counterexamples to convergence theorem of maximum-entropy clustering algorithm
于剑; 石洪波; 黄厚宽; 孙喜晨; 程乾生
2003-01-01
In this paper, we surveyed the development of maximum-entropy clustering algorithm, pointed out that the maximum-entropy clustering algorithm is not new in essence, and constructed two examples to show that the iterative sequence given by the maximum-entropy clustering algorithm may not converge to a local minimum of its objective function, but a saddle point. Based on these results, our paper shows that the convergence theorem of maximum-entropy clustering algorithm put forward by Kenneth Rose et al. does not hold in general cases.
Vacco, D.; Alley, R. B.; Pollard, D.
2008-12-01
The greatest extent of glacial ice during MIS2 (Wisconsinan) in the western US may record a short-lived (sub- millennial) cold event rather than an extended Last Glacial Maximum, based on modeling experiments simulating the Pinedale moraines of Half Moon Lake and adjacent valleys near Pinedale, Wyoming. In some locations including the Half Moon Lake valley, Bull Lake (MIS6) moraines lie well down-valley (2 km) of Pinedale moraines, whereas nearby the moraines are much more closely nested (e.g., Fremont Lake valley, 0.5 km). In a simple flow-line glacier model of Half Moon Lake valley, the subglacial topography (steep upper reaches feeding a nearly flat and locally overdeepened region down-glacier) introduces strong hysteresis behavior with abrupt transitions. We have been unable to find any steady conditions that would grow a steady-state glacier ending at the Pinedale moraines. Instead, the ice preferentially terminates either well up-valley, inside modern Half Moon Lake, or advances to the Bull Lake terminal moraines. In the model, advance of the glacier terminus past Half Moon Lake thickens the ice up-valley of the lake, raising more of the glacier into the accumulation zone and causing further advance. If we specify a warming event as the ice reaches the Pinedale moraines, a steady state Pinedale terminus is possible for a narrow range of parameters; smaller warming allows continuing advance, and larger warming triggers retreat. The modeled time-scale for advance from Half Moon Lake to the Pinedale moraines is typically some centuries for climatic perturbations tested, suggesting the hypothesis that the Pinedale maximum at this site records a short-lived event perhaps linked to the Dansgaard-Oeschger or Heinrich oscillations of the North Atlantic. Simulations for the adjacent Fremont Lake valley, in which the Bull Lake terminated up-valley of any prominent flattening of the valley floor, show more-nearly linear dependence of terminus position on snowline
Inverse Kinematics With Closed Form Solution For Denso Robot Manipulator
Ikhsan Eka Prasetia
2015-03-01
Full Text Available In this paper, the forward kinematics and inverse kinematics used on the Denso robot manipulator which has a 6-DOF. The forward kinematics will result in the desired position by end-effector, while inverse kinematics produce angel on each joint. Inverse kinematics problem are very difficult, therefor to obtain the solution of inverse kinematics using closed form solution with geometry approach. The simulation result obtained from forward kinematics and inverse kinematics is determining desired position by Denso robot manipulator. Forward kinematics produce the desired position by the end-effector. Inverse kinematics produce joint angle, where the inverse kinematics produce eight conditions obtained from closed form solution with geometry approach to reach the desired position by the end-effector.
Why does steady-state magnetic reconnection have a maximum local rate of order 0.1?
Liu, Yi-Hsin; Guo, F; Daughton, W; Li, H; Cassak, P A; Shay, M A
2016-01-01
Simulations suggest collisionless steady-state magnetic reconnection of Harris-type current sheets proceeds with a rate of order 0.1, independent of dissipation mechanism. We argue this long-standing puzzle is a result of constraints at the magnetohydrodynamic (MHD) scale. We perform a scaling analysis of the reconnection rate as a function of the opening angle made by the upstream magnetic fields, finding a maximum reconnection rate close to 0.2. The predictions compare favorably to particle-in-cell simulations of relativistic electron-positron and non-relativistic electron-proton reconnection. The fact that simulated reconnection rates are close to the predicted maximum suggests reconnection proceeds near the most efficient state allowed at the MHD-scale. The rate near the maximum is relatively insensitive to the opening angle, potentially explaining why reconnection has a similar fast rate in differing models.
Closed inductively coupled plasma cell
Manning, Thomas J.; Palmer, Byron A.; Hof, Douglas E.
1990-01-01
A closed inductively coupled plasma cell generates a relatively high power, low noise plasma for use in spectroscopic studies. A variety of gases can be selected to form the plasma to minimize spectroscopic interference and to provide a electron density and temperature range for the sample to be analyzed. Grounded conductors are placed at the tube ends and axially displaced from the inductive coil, whereby the resulting electromagnetic field acts to elongate the plasma in the tube. Sample materials can be injected in the plasma to be excited for spectroscopy.
AA, closed orbit observation pickup
1980-01-01
Electrostatic pickups around the circumference of the AA served for the measurement of the closed orbits across the wide momentum range of +- 3% to either side of central orbit. The pickups were of the "shoebox" type, with diagonal cuts, a horizontal and a vertical one mechanically coupled together. They were located where they would not require extra space. The small ones, like the one we see here, were inserted into the vacuum chamber of the BLG (long and narrow) bending magnets. See also 8001372, 8010042, 8010045
AA, closed orbit observation pickup
CERN PhotoLab
1980-01-01
Electrostatic pickups around the circumference of the AA served for the measurement of the closed orbits across the wide momentum range of +- 3% to either side of central orbit. The pickups were of the "shoebox" type, with diagonal cuts, a horizontal and a vertical one mechanically coupled together. They were located where they would not require extra space. The small ones, like the one we see here, were inserted into the vacuum chamber of the BLG (long and narrow) bending magnets. Werner Sax contemplates his achievement. See also 8001383, 8010042, 8010045.
Singularities and Closed String Tachyons
Silverstein, E
2006-01-01
A basic problem in gravitational physics is the resolution of spacetime singularities where general relativity breaks down. The simplest such singularities are conical singularities arising from orbifold identifications of flat space, and the most challenging are spacelike singularities inside black holes (and in cosmology). Topology changing processes also require evolution through classically singular spacetimes. I briefly review how a phase of closed string tachyon condensate replaces, and helps to resolve, basic singularities of each of these types. Finally I discuss some interesting features of singularities arising in the small volume limit of compact negatively curved spaces and the emerging zoology of spacelike singularities.
Existentially closed locally finite groups
Shelah, Saharon
2011-01-01
We investigate this class of groups originally called ulf (universal locally finite groups) of cardinality lambda . We prove that for every locally finite group G there is a canonical existentially closed extention of the same cardinality, unique up to isomorphism and increasing with G . Also we get, e.g. existence of complete members (i.e. with no non-inner automorphisms) in many cardinals (provably in ZFC). We also get a parallel to stability theory in the sense of investigating definable types.
Closed-loop neuromorphic benchmarks
Stewart
2015-11-01
Full Text Available Benchmarks Terrence C. Stewart 1* , Travis DeWolf 1 , Ashley Kleinhans 2 , Chris Eliasmith 1 1 University of Waterloo, Canada, 2 Council for Scientific and Industrial Research, South Africa Submitted to Journal: Frontiers in Neuroscience Specialty... the study was exempt from ethical approval procedures.) Did the study presented in the manuscript involve human or animal subjects: No I v i w 1Closed-loop Neuromorphic Benchmarks Terrence C. Stewart 1,∗, Travis DeWolf 1, Ashley Kleinhans 2 and Chris...
Wang, Chaolin; Zhong, Shaobo; Zhang, Fushen; Huang, Quanyi
2016-11-01
Precipitation interpolation has been a hot area of research for many years. It had close relation to meteorological factors. In this paper, precipitation from 91 meteorological stations located in and around Yunnan, Guizhou and Guangxi Zhuang provinces (or autonomous region), Mainland China was taken into consideration for spatial interpolation. Multivariate Bayesian maximum entropy (BME) method with auxiliary variables, including mean relative humidity, water vapour pressure, mean temperature, mean wind speed and terrain elevation, was used to get more accurate regional distribution of annual precipitation. The means, standard deviations, skewness and kurtosis of meteorological factors were calculated. Variogram and cross- variogram were fitted between precipitation and auxiliary variables. The results showed that the multivariate BME method was precise with hard and soft data, probability density function. Annual mean precipitation was positively correlated with mean relative humidity, mean water vapour pressure, mean temperature and mean wind speed, negatively correlated with terrain elevation. The results are supposed to provide substantial reference for research of drought and waterlog in the region.
Eberhard, Wynn L
2017-04-01
The maximum likelihood estimator (MLE) is derived for retrieving the extinction coefficient and zero-range intercept in the lidar slope method in the presence of random and independent Gaussian noise. Least-squares fitting, weighted by the inverse of the noise variance, is equivalent to the MLE. Monte Carlo simulations demonstrate that two traditional least-squares fitting schemes, which use different weights, are less accurate. Alternative fitting schemes that have some positive attributes are introduced and evaluated. The principal factors governing accuracy of all these schemes are elucidated. Applying these schemes to data with Poisson rather than Gaussian noise alters accuracy little, even when the signal-to-noise ratio is low. Methods to estimate optimum weighting factors in actual data are presented. Even when the weighting estimates are coarse, retrieval accuracy declines only modestly. Mathematical tools are described for predicting retrieval accuracy. Least-squares fitting with inverse variance weighting has optimum accuracy for retrieval of parameters from single-wavelength lidar measurements when noise, errors, and uncertainties are Gaussian distributed, or close to optimum when only approximately Gaussian.
The closed-universe recollapse conjecture
Barrow, John D.; Galloway, Gregory J.; Tipler, Frank J.
1986-12-01
It is widely believed that all expanding S3 closed universes that satisfy the standard energy conditions recollapse to a second singularity. The authors show that this is false even for Friedmann universes: they construct an ever-expanding S3 Friedmann universe in which the matter tensor satisfies the strong, weak and dominant energy conditions and the generic condition. The authors prove a general recollapse theorem for Friedmann universes: if the positive pressure criterion, dominant energy condition and matter regularity condition hold, then an S3 Friedmann universe must recollapse. The authors show that all known vacuum solutions with Cauchy surface topology S3 or S2×S1 recollapse, and they conjecture that this is a property of all vacuum solutions of Einstein's equations with such Cauchy surfaces. The authors consider a number of Kantowski-Sachs and Bianchi IX universes with various matter tensors, and formulate a new recollapse conjecture for matter-filled universes.
Positive maps, positive polynomials and entanglement witnesses
Skowronek, Lukasz
2009-01-01
We link the study of positive quantum maps, block positive operators, and entanglement witnesses with problems related to multivariate polynomials. For instance, we show how indecomposable block positive operators relate to biquadratic forms that are not sums of squares. Although the general problem of describing the set of positive maps remains open, in some particular cases we solve the corresponding polynomial inequalities and obtain explicit conditions for positivity.
Positive maps, positive polynomials and entanglement witnesses
Skowronek, Lukasz; Zyczkowski, Karol [Institute of Physics, Jagiellonian University, Krakow (Poland)], E-mail: lukasz.skowronek@uj.edu.pl, E-mail: karol@tatry.if.uj.edu.pl
2009-08-14
We link the study of positive quantum maps, block positive operators and entanglement witnesses with problems related to multivariate polynomials. For instance, we show how indecomposable block positive operators relate to biquadratic forms that are not sums of squares. Although the general problem of describing the set of positive maps remains open, in some particular cases we solve the corresponding polynomial inequalities and obtain explicit conditions for positivity.
Closed strings in Misner space
Berkooz, M; Rozali, M
2004-01-01
Misner space, also known as the Lorentzian orbifold $R^{1,1}/boost$, is one of the simplest examples of a cosmological singularity in string theory. In this work, the study of weakly coupled closed strings on this space is pursued in several directions: (i) physical states in the twisted sectors are found to come in two kinds: short strings, which wind along the compact space-like direction in the cosmological (Milne) region, and long strings, which wind along the compact time direction in the (Rindler) whiskers. The latter can be viewed as infinitely long static open strings, stretching from Rindler infinity to a finite radius and folding back onto themselves. (ii) As in the Schwinger effect, tunneling between these states corresponds to local pair production of winding strings. The tunneling rate approaches unity as the winding number $w$ gets large, as a consequence of the singular geometry. (iii) The one-loop string amplitude has singularities on the moduli space, associated to periodic closed string traj...
A Closed Universe Expanding Forever
Silva N. P.
2014-07-01
Full Text Available In a recent paper, the expression a ( t = e H 0 T 0 [ ( t T 0 where = 0 : 5804, was proposed for the expansion factor of our Universe. According to it, gravity dominates the expan- sion ( matter era until the age of T ⋆ = 3 : 214 Gyr and, after that, dark energy dominates ( dark energy era leading to an eternal expansion, no matter if the Universe is closed, flat or open. In this paper we consider only the closed version and show that there is an upper limit for the size of the radial comoving coordinate, beyond which nothing is observed by our fundamental observer, on Earth. Our observable Universe may be only a tiny portion of a much bigger Universe most of it unobservable to us. This leads to the idea that an endless number of other fundamental observers may live on equal number of Universes similar to ours. Either we talk about many Universes — Multiverse — or about an unique Universe, only part of it observable to us.
Closed supermarket refrigerator and freezer cabinets. A feasibility study
Ligthart, F.A.T.M. [ECN Energy in the Built Environment, Petten (Netherlands)
2008-11-15
The City of Amsterdam's Environmental and Building Department commissioned the Energy research Centre of the Netherlands (ECN) to calculate the time needed to recoup the cost of closing the existing refrigerator and freezer display cabinets used in supermarkets. We were asked to give particular consideration to the following aspects: (1) The cabinet's energy consumption; (2) The energy price; and (3) The cost of closing the cabinet. The payback period has been calculated by dividing the investment required to close the cabinet by the amount saved on energy each year, less any additional costs incurred as a result of the scheme. For existing upright refrigerator cabinets, that period works out at 2.9 years with a margin error of {+-}0.9 years. In the case of chest freezers, it is approximately 2.4 years, with a maximum of 2.5 and a minimum of 1.3 years. For chest refrigerators, the payback period is 9.4 years. If units are closed overnight only, the time needed to payback the cost of that measure ranges between 1.8 and 4.1 years. Moreover, research shows that closing refrigerator and freezer display units will not reduce turnover. In addition, it will significantly improve the ambient climate in supermarkets.
Combining Experiments and Simulations Using the Maximum Entropy Principle
Boomsma, Wouter; Ferkinghoff-Borg, Jesper; Lindorff-Larsen, Kresten
2014-01-01
are not in quantitative agreement with experimental data. The principle of maximum entropy is a general procedure for constructing probability distributions in the light of new data, making it a natural tool in cases when an initial model provides results that are at odds with experiments. The number of maximum entropy...
49 CFR 174.86 - Maximum allowable operating speed.
2010-10-01
... 49 Transportation 2 2010-10-01 2010-10-01 false Maximum allowable operating speed. 174.86 Section... operating speed. (a) For molten metals and molten glass shipped in packagings other than those prescribed in § 173.247 of this subchapter, the maximum allowable operating speed may not exceed 24 km/hour (15...
Parametric optimization of thermoelectric elements footprint for maximum power generation
Rezania, A.; Rosendahl, Lasse; Yin, Hao
2014-01-01
The development studies in thermoelectric generator (TEG) systems are mostly disconnected to parametric optimization of the module components. In this study, optimum footprint ratio of n- and p-type thermoelectric (TE) elements is explored to achieve maximum power generation, maximum cost-perform...
30 CFR 56.19066 - Maximum riders in a conveyance.
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum riders in a conveyance. 56.19066 Section 56.19066 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Hoisting Procedures § 56.19066 Maximum riders in a conveyance. In shafts inclined over 45...
30 CFR 57.19066 - Maximum riders in a conveyance.
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum riders in a conveyance. 57.19066 Section 57.19066 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Hoisting Procedures § 57.19066 Maximum riders in a conveyance. In shafts inclined over 45...
Maximum Atmospheric Entry Angle for Specified Retrofire Impulse
T. N. Srivastava
1969-07-01
Full Text Available Maximum atmospheric entry angles for vehicles initially moving in elliptic orbits are investigated and it is shown that tangential retrofire impulse at the apogee results in the maximum entry angle. Equivalence of maximizing the entry angle and minimizing the retrofire impulse is also established.
5 CFR 838.711 - Maximum former spouse survivor annuity.
2010-01-01
... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Maximum former spouse survivor annuity... Orders Awarding Former Spouse Survivor Annuities Limitations on Survivor Annuities § 838.711 Maximum former spouse survivor annuity. (a) Under CSRS, payments under a court order may not exceed the...
46 CFR 151.45-6 - Maximum amount of cargo.
2010-10-01
... 46 Shipping 5 2010-10-01 2010-10-01 false Maximum amount of cargo. 151.45-6 Section 151.45-6 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Operations § 151.45-6 Maximum amount of cargo. (a)...
20 CFR 226.52 - Total annuity subject to maximum.
2010-04-01
... rate effective on the date the supplemental annuity begins, before any reduction for a private pension... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Total annuity subject to maximum. 226.52... COMPUTING EMPLOYEE, SPOUSE, AND DIVORCED SPOUSE ANNUITIES Railroad Retirement Family Maximum § 226.52...
49 CFR 195.406 - Maximum operating pressure.
2010-10-01
... 49 Transportation 3 2010-10-01 2010-10-01 false Maximum operating pressure. 195.406 Section 195... HAZARDOUS LIQUIDS BY PIPELINE Operation and Maintenance § 195.406 Maximum operating pressure. (a) Except for surge pressures and other variations from normal operations, no operator may operate a pipeline at a...
Maximum-entropy clustering algorithm and its global convergence analysis
无
2001-01-01
Constructing a batch of differentiable entropy functions touniformly approximate an objective function by means of the maximum-entropy principle, a new clustering algorithm, called maximum-entropy clustering algorithm, is proposed based on optimization theory. This algorithm is a soft generalization of the hard C-means algorithm and possesses global convergence. Its relations with other clustering algorithms are discussed.
Distribution of maximum loss of fractional Brownian motion with drift
Çağlar, Mine; Vardar-Acar, Ceren
2013-01-01
In this paper, we find bounds on the distribution of the maximum loss of fractional Brownian motion with H >= 1/2 and derive estimates on its tail probability. Asymptotically, the tail of the distribution of maximum loss over [0, t] behaves like the tail of the marginal distribution at time t.
48 CFR 436.575 - Maximum workweek-construction schedule.
2010-10-01
...-construction schedule. 436.575 Section 436.575 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE... Maximum workweek-construction schedule. The contracting officer shall insert the clause at 452.236-75, Maximum Workweek-Construction Schedule, if the clause at FAR 52.236-15 is used and the contractor's...
30 CFR 57.5039 - Maximum permissible concentration.
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum permissible concentration. 57.5039... Maximum permissible concentration. Except as provided by standard § 57.5005, persons shall not be exposed to air containing concentrations of radon daughters exceeding 1.0 WL in active workings. ...
5 CFR 550.105 - Biweekly maximum earnings limitation.
2010-01-01
... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Biweekly maximum earnings limitation. 550.105 Section 550.105 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PAY ADMINISTRATION (GENERAL) Premium Pay Maximum Earnings Limitations § 550.105 Biweekly...
5 CFR 550.106 - Annual maximum earnings limitation.
2010-01-01
... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Annual maximum earnings limitation. 550.106 Section 550.106 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PAY ADMINISTRATION (GENERAL) Premium Pay Maximum Earnings Limitations § 550.106 Annual...
32 CFR 842.35 - Depreciation and maximum allowances.
2010-07-01
... 32 National Defense 6 2010-07-01 2010-07-01 false Depreciation and maximum allowances. 842.35... LITIGATION ADMINISTRATIVE CLAIMS Personnel Claims (31 U.S.C. 3701, 3721) § 842.35 Depreciation and maximum allowances. The military services have jointly established the “Allowance List-Depreciation Guide”...
Takeda, K.; Ochiai, H.; Takeuchi, S.
1985-01-01
Maximum snow water equivalence and snowcover distribution are estimated using several LANDSAT data taken in snowmelting season over a four year period. The test site is Okutadami-gawa Basin located in the central position of Tohoku-Kanto-Chubu District. The year to year normalization for snowmelt volume computation on the snow line is conducted by year to year correction of degree days using the snowcover percentage within the test basin obtained from LANDSAT data. The maximum snow water equivalent map in the test basin is generated based on the normalized snowmelt volume on the snow line extracted from four LANDSAT data taken in a different year. The snowcover distribution on an arbitrary day in snowmelting of 1982 is estimated from the maximum snow water equivalent map. The estimated snowcover is compared with the snowcover area extracted from NOAA-AVHRR data taken on the same day. The applicability of the snow estimation using LANDSAT data is discussed.
LANDFILL OPERATION FOR CARBON SEQUESTRATION AND MAXIMUM METHANE EMISSION CONTROL
Don Augenstein; Ramin Yazdani; Rick Moore; Michelle Byars; Jeff Kieffer; Professor Morton Barlaz; Rinav Mehta
2000-02-26
Controlled landfilling is an approach to manage solid waste landfills, so as to rapidly complete methane generation, while maximizing gas capture and minimizing the usual emissions of methane to the atmosphere. With controlled landfilling, methane generation is accelerated to more rapid and earlier completion to full potential by improving conditions (principally moisture, but also temperature) to optimize biological processes occurring within the landfill. Gas is contained through use of surface membrane cover. Gas is captured via porous layers, under the cover, operated at slight vacuum. A field demonstration project has been ongoing under NETL sponsorship for the past several years near Davis, CA. Results have been extremely encouraging. Two major benefits of the technology are reduction of landfill methane emissions to minuscule levels, and the recovery of greater amounts of landfill methane energy in much shorter times, more predictably, than with conventional landfill practice. With the large amount of US landfill methane generated, and greenhouse potency of methane, better landfill methane control can play a substantial role both in reduction of US greenhouse gas emissions and in US renewable energy. The work described in this report, to demonstrate and advance this technology, has used two demonstration-scale cells of size (8000 metric tons [tonnes]), sufficient to replicate many heat and compaction characteristics of larger ''full-scale'' landfills. An enhanced demonstration cell has received moisture supplementation to field capacity. This is the maximum moisture waste can hold while still limiting liquid drainage rate to minimal and safely manageable levels. The enhanced landfill module was compared to a parallel control landfill module receiving no moisture additions. Gas recovery has continued for a period of over 4 years. It is quite encouraging that the enhanced cell methane recovery has been close to 10-fold that experienced with
Senjyu, Tomonobu; Ochi, Yasutaka; Kikunaga, Yasuaki; Tokudome, Motoki; Yona, Atsushi; Muhando, Endusa Billy; Urasaki, Naomitsu [Department of Electrical and Electronics Engineering, Faculty of Engineering, University of the Ryukyus, 1 Senbaru, Nishihara-cho, Nakagami, Okinawa 903-0213 (Japan); Funabashi, Toshihisa [Meidensha Corporation, ThinkPark Tower, 2-1-1, Ohsaki, Shinagawa-ku, Tokyo 141-6029 (Japan)
2009-04-15
This paper proposes a technique that determines the optimal windmill operation speed and the optimal rotor flux. Moreover, the position and speed sensor-less wind generation system using the electromotive voltage observer to estimate rotor position and full-order observer to estimate rotor speed and the windmill output torque are proposed. The position and speed sensor-less maximum power point of wind power generation system is controlled by using the above estimated values, optimized windmill operation speed for maximum output power and optimized rotor flux for minimum generator losses. The effectiveness of the position and speed sensor-less maximum power point tracking control for wind power generation system with squirrel cage induction generator is verified by simulations. The simulation results confirm that the proposed method can estimate the operation speed efficiently. (author)
Journal of Adventure Education and Outdoor Leadership, 1993
1993-01-01
Discusses Alan Hales's model of safety management in the context of caving. When two sets of hazards, human and environmental, are present together, risk occurs. Objective risk is uncontrollable and should be avoided in educational settings; subjective risk is controllable. Presents positive and negative strategies for engaging or avoiding…
Sexual disclosures: connections to relational satisfaction and closeness.
Coffelt, Tina A; Hess, Jon A
2014-01-01
This study examines sexual communication by describing the content of sexual disclosures within marital relationships and assessing the association between sexual disclosures and relational outcomes, specifically relational satisfaction and closeness. A survey administered to 293 married individuals (58% female) who had an average age of 40 years (range = 20-73), 13.7 years of marriage (range = 1 month to 54 years), and who reported high levels of relational satisfaction assessed the relation between the content of sexual disclosures and satisfaction and closeness. While sexual disclosures are made infrequently, positive affect and sexual preferences are disclosed more than negative topics and disclosing sexual information is positively related to relationship satisfaction, rρ(280) =.26, p sexual information and relationship satisfaction and closeness, as reported by individuals experiencing relationship satisfaction.
Maximum Principles for Discrete and Semidiscrete Reaction-Diffusion Equation
Petr Stehlík
2015-01-01
Full Text Available We study reaction-diffusion equations with a general reaction function f on one-dimensional lattices with continuous or discrete time ux′ (or Δtux=k(ux-1-2ux+ux+1+f(ux, x∈Z. We prove weak and strong maximum and minimum principles for corresponding initial-boundary value problems. Whereas the maximum principles in the semidiscrete case (continuous time exhibit similar features to those of fully continuous reaction-diffusion model, in the discrete case the weak maximum principle holds for a smaller class of functions and the strong maximum principle is valid in a weaker sense. We describe in detail how the validity of maximum principles depends on the nonlinearity and the time step. We illustrate our results on the Nagumo equation with the bistable nonlinearity.
The mechanics of granitoid systems and maximum entropy production rates.
Hobbs, Bruce E; Ord, Alison
2010-01-13
A model for the formation of granitoid systems is developed involving melt production spatially below a rising isotherm that defines melt initiation. Production of the melt volumes necessary to form granitoid complexes within 10(4)-10(7) years demands control of the isotherm velocity by melt advection. This velocity is one control on the melt flux generated spatially just above the melt isotherm, which is the control valve for the behaviour of the complete granitoid system. Melt transport occurs in conduits initiated as sheets or tubes comprising melt inclusions arising from Gurson-Tvergaard constitutive behaviour. Such conduits appear as leucosomes parallel to lineations and foliations, and ductile and brittle dykes. The melt flux generated at the melt isotherm controls the position of the melt solidus isotherm and hence the physical height of the Transport/Emplacement Zone. A conduit width-selection process, driven by changes in melt viscosity and constitutive behaviour, operates within the Transport Zone to progressively increase the width of apertures upwards. Melt can also be driven horizontally by gradients in topography; these horizontal fluxes can be similar in magnitude to vertical fluxes. Fluxes induced by deformation can compete with both buoyancy and topographic-driven flow over all length scales and results locally in transient 'ponds' of melt. Pluton emplacement is controlled by the transition in constitutive behaviour of the melt/magma from elastic-viscous at high temperatures to elastic-plastic-viscous approaching the melt solidus enabling finite thickness plutons to develop. The system involves coupled feedback processes that grow at the expense of heat supplied to the system and compete with melt advection. The result is that limits are placed on the size and time scale of the system. Optimal characteristics of the system coincide with a state of maximum entropy production rate.
2010-10-01
... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Closed areas. 648.73 Section 648.73... Clam and Ocean Quahog Fisheries § 648.73 Closed areas. (a) Areas closed because of environmental degradation. Certain areas are closed to all surf clam and ocean quahog fishing because of...
Navicular bone position determined by positional MRI
Hansen, Philip; Johannsen, Finn E; Hangaard, Stine
2016-01-01
OBJECTIVE: To examine intraobserver, interobserver and between-day reproducibility of positional MRI for evaluation of navicular bone height (NVH) and medial navicular position (MNP). MATERIALS AND METHODS: Positional MRI (pMRI) of the foot was performed on ten healthy participants (0.25 T G......: Navicular height and medial navicular position can be measured by pMRI in a very reproducible manner within and between observers. Increased measurement variation is observed between-days in supine position, which may be due to small positional differences or other unknown biomechanical factors....
Effect of wrist position on young adults pinch grip control
Vanessa Luzia Barros de Andrade
2015-12-01
Full Text Available Pinch grip is used in a large number of handling activities that require precision and control of an object. The position of the upper arm joints affects the fingers force production in order to handle the object. This study aimed to verify the influence of the wrist position in the production of maximum strength and in the control fingers grip pinch submaximum strength control. Participants were 21 right handed adults (10 male, 18-26 years old. They made two attempts of maximum force production and eight attempts of submaximal force production (four at 20% and four at 40% of maximum strength for pinch grip in three wrist positions: neutral, flexion and extension. The results showed that the production of maximum strength is higher in neutral position compared to wrist flexion and extension and higher for men compared to women. In addition, there was a positive correlation between the length of the hand and the production of maximum strength. The results also indicated that the wrist position did not interfere in the submaximum force control during this task. However, participants showed more difficulty controlling 20% than 40% of maximum strength. The present study showed evidence that the motor units used to produce grip pinch maximum strength cross the wrist joint but those used for the 20% and 40% of maximum strength are present only in the fingers and hand.
Maximum Power Game as a Physical and Social Extension of Classical Games
Kim, Pilwon
2017-01-01
We consider an electric circuit in which the players participate as resistors and adjust their resistance in pursuit of individual maximum power. The maximum power game(MPG) becomes very complicated in a circuit which is indecomposable into serial/parallel components, yielding a nontrivial power distribution at equilibrium. Depending on the circuit topology, MPG covers a wide range of phenomena: from a social dilemma in which the whole group loses to a well-coordinated situation in which the individual pursuit of power promotes the collective outcomes. We also investigate a situation where each player in the circuit has an intrinsic heat waste. Interestingly, it is this individual inefficiency which can keep them from the collective failure in power generation. When coping with an efficient opponent with small intrinsic resistance, a rather inefficient player gets more power than efficient one. A circuit with multiple voltage inputs forms the network-based maximum power game. One of our major interests is to figure out, in what kind of the networks the pursuit for private power leads to greater total power. It turns out that the circuits with the scale-free structure is one of the good candidates which generates as much power as close to the possible maximum total. PMID:28272544
Maximum Power Game as a Physical and Social Extension of Classical Games
Kim, Pilwon
2017-03-01
We consider an electric circuit in which the players participate as resistors and adjust their resistance in pursuit of individual maximum power. The maximum power game(MPG) becomes very complicated in a circuit which is indecomposable into serial/parallel components, yielding a nontrivial power distribution at equilibrium. Depending on the circuit topology, MPG covers a wide range of phenomena: from a social dilemma in which the whole group loses to a well-coordinated situation in which the individual pursuit of power promotes the collective outcomes. We also investigate a situation where each player in the circuit has an intrinsic heat waste. Interestingly, it is this individual inefficiency which can keep them from the collective failure in power generation. When coping with an efficient opponent with small intrinsic resistance, a rather inefficient player gets more power than efficient one. A circuit with multiple voltage inputs forms the network-based maximum power game. One of our major interests is to figure out, in what kind of the networks the pursuit for private power leads to greater total power. It turns out that the circuits with the scale-free structure is one of the good candidates which generates as much power as close to the possible maximum total.
Maximum Energy Extraction Control for Wind Power Generation Systems Based on the Fuzzy Controller
Kamal, Elkhatib; Aitouche, Abdel; Mohammed, Walaa; Sobaih, Abdel Azim
2016-10-01
This paper presents a robust controller for a variable speed wind turbine with a squirrel cage induction generator (SCIG). For variable speed wind energy conversion system, the maximum power point tracking (MPPT) is a very important requirement in order to maximize the efficiency. The system is nonlinear with parametric uncertainty and subject to large disturbances. A Takagi-Sugeno (TS) fuzzy logic is used to model the system dynamics. Based on the TS fuzzy model, a controller is developed for MPPT in the presence of disturbances and parametric uncertainties. The proposed technique ensures that the maximum power point (MPP) is determined, the generator speed is controlled and the closed loop system is stable. Robustness of the controller is tested via the variation of model's parameters. Simulation studies clearly indicate the robustness and efficiency of the proposed control scheme compared to other techniques.
Combined simplified maximum likelihood and sphere decoding algorithm for MIMO system
ZHANG Lei; YUAN Ting-ting; ZHANG Xin; YANG Da-cheng
2008-01-01
In this article, a new system model for sphere decoding (SD) algorithm is introduced. For the multiple- input multiple-out (MIMO) system, a simplified maximum likelihood (SML) decoding algorithm is proposed based on the new model. The SML algorithm achieves optimal maximum likelihood (ML) performance, and drastically reduces the complexity as compared to the conventional SD algorithm. The improved algorithm is presented by combining the sphere decoding algorithm based on Schnorr-Euchner strategy (SE-SD) with the SML algorithm when the number of transmit antennas exceeds 2. Compared to conventional SD, the proposed algorithm has low complexity especially at low signal to noise ratio (SNR). It is shown by simulation that the proposed algorithm has performance very close to conventional SD.
A maximum power point tracker for photovoltaic energy systems based on fuzzy neural networks
Chun-hua LI; Xin-jian ZHU; Guang-yi CAO; Wan-qi HU; Sheng SUI; Ming-ruo HU
2009-01-01
To extract the maximum power from a photovoltaic (PV) energy system, the real-time maximum power point (MPP) of the PV array must be tracked closely. The non-linear and time-variant characteristics of the PV array and the non-linear and non-minimum phase characteristics of a boost converter make it difficult to track the MPP for traditional control strategies. We propose a fuzzy neural network controller (FNNC), which combines the reasoning capability of fuzzy logical systems and the learning capability of neural networks, to track the MPP. With a derived learning algorithm, the parameters of the FNNC are updated adaptively. A gradient estimator based on a radial basis function neural network is developed to provide the reference information to the FNNC. Simulation results show that the proposed control algorithm provides much better tracking performance compared with the fuzzy logic control algorithm.
Closing the Cybersecurity Skills Gap
Rebecca Vogel
2016-05-01
Full Text Available The current consensus is that there is a worldwide gap in skills needed for a competent cybersecurity workforce. This skills gap has implications for the national security sector, both public and private. Although the view is that this will take a concerted effort to rectify, it presents an opportunity for IT professionals, university students, and aspirants to take-up jobs in national security national intelligence as well military and law enforcement intelligence. This paper examines context of the issue, the nature of the cybersecurity skills gap, and some key responses by governments to address the problem. The paper also examines the emerging employment trends, some of the employment challenges, and what these might mean for practice. The paper argues that the imperative is to close the cyber skills gap by taking advantage of the window of opportunity, allowing individuals interested in moving into the cybersecurity field to do so via education and training.
Close-range optical measurement of aircraft's 3D attitude and accuracy evaluation
Zhe Li; Zhenliang Ding; Feng Yuan
2008-01-01
A new screen-spot imaging method based on optical measurement is proposed, which is applicable to the close-range measurement of aircraft's three-dimensional (3D) attitude parameters. Laser tracker is used to finish the global calibrations of the high-speed cameras and the fixed screens on test site, as well as to establish media-coordinate-frames among various coordinate systems. The laser cooperation object mounted on the aircraft surface projects laser beams on the screens and the high-speed cameras syn-chronously record the light-spots' position changing with aircraft attitude. The recorded image sequences are used to compute the aircraft attitude parameters. Based on the matrix analysis, the error sources of the measurement accuracy are analyzed, and the maximum relative error of this mathematical model is estimated. The experimental result shows that this method effectively makes the change of aircraft position distinguishable, and the error of this method is no more than 3' while the rotation angles of three axes are within a certain range.
2010-07-01
... as specified in 40 CFR 1065.610. This is the maximum in-use engine speed used for calculating the NOX... procedures of 40 CFR part 1065, based on the manufacturer's design and production specifications for the..., power density, and maximum in-use engine speed. 1042.140 Section 1042.140 Protection of...
Maximum flux density of the gyrosynchrotron spectrum in a nonuniform source
Ai-Hua Zhou; Rong-Chuan Wang; Cheng-Wen Shao
2009-01-01
The maximum flux density of a gyrosynchrotron radiation spectrum in a mag- netic dip|oe model with self absorption and gyroresonance is calculated. Our calculations show that the maximum flux density of the gyrosynchrotron spectrum increases with in- creasing low-energy cutoff, number density, input depth of energetic electrons, magnetic field strength and viewing angle, and with decreasing energy spectral index of energetic electrons, number density and temperature of thermal electrons. It is found that there are linear correlations between the logarithms of the maximum flux density and the above eight parameters with correlation coefficients higher than 0.91 and fit accuracies better than 10%. The maximum flux density could be a good indicator of the changes of these source parameters. In addition, we find that there are very good positive linear correla- tions between the logarithms of the maximum flux density and peak frequency when the above former five parameters vary respectively. Their linear correlation coefficients are higher than 0.90 and the fit accuracies are better than 0.5%.
Closing the BME attainment gap
Nortcliffe, Anne; Pink-Keech, Cathy; Evans, Jayne
2014-01-01
The national British Minority Ethnic (BME) attainment gap is 16% (Berry and Loke, 2011). BME students frequently report being isolated and lonely (Cotton et al, 2011), and experience derisory support (NUS, 2011). At Sheffield Hallam University (SHU) a pilot Peer Assisted Learning (PAL) programme on an engineering course to aid inclusivity, as at UCL PAL has increased student retention (Angelini, 2011). The initial results at SHU are positive: "They [Mentors] kept me on a course and ...
Recent developments in maximum likelihood estimation of MTMM models for categorical data
Minjeong eJeon
2014-04-01
Full Text Available Maximum likelihood (ML estimation of categorical multitrait-multimethod (MTMM data is challenging because the likelihood involves high-dimensional integrals over the crossed method and trait factors, with no known closed-form solution.The purpose of the study is to introduce three newly developed ML methods that are eligible for estimating MTMM models with categorical responses: Variational maximization-maximization, Alternating imputation posterior, and Monte Carlo local likelihood. Each method is briefly described and its applicability for MTMM models with categorical data are discussed.An illustration is provided using an empirical example.
Background adjustment of cDNA microarray images by Maximum Entropy distributions.
Argyropoulos, Christos; Daskalakis, Antonis; Nikiforidis, George C; Sakellaropoulos, George C
2010-08-01
Many empirical studies have demonstrated the exquisite sensitivity of both traditional and novel statistical and machine intelligence algorithms to the method of background adjustment used to analyze microarray datasets. In this paper we develop a statistical framework that approaches background adjustment as a classic stochastic inverse problem, whose noise characteristics are given in terms of Maximum Entropy distributions. We derive analytic closed form approximations to the combined problem of estimating the magnitude of the background in microarray images and adjusting for its presence. The proposed method reduces standardized measures of log expression variability across replicates in situations of known differential and non-differential gene expression without increasing the bias. Additionally, it results in computationally efficient procedures for estimation and learning based on sufficient statistics and can filter out spot measures with intensities that are numerically close to the background level resulting in a noise reduction of about 7%.
Maximum Likelihood Timing and Carrier Synchronization in Burst-Mode Satellite Transmissions
Morelli Michele
2007-01-01
Full Text Available This paper investigates the joint maximum likelihood (ML estimation of the carrier frequency offset, timing error, and carrier phase in burst-mode satellite transmissions over an AWGN channel. The synchronization process is assisted by a training sequence appended in front of each burst and composed of alternating binary symbols. The use of this particular pilot pattern results into an estimation algorithm of affordable complexity that operates in a decoupled fashion. In particular, the frequency offset is measured first and independently of the other parameters. Timing and phase estimates are subsequently computed through simple closed-form expressions. The performance of the proposed scheme is investigated by computer simulation and compared with Cramer-Rao bounds. It turns out that the estimation accuracy is very close to the theoretical limits up to relatively low signal-to-noise ratios. This makes the algorithm well suited for turbo-coded transmissions operating near the Shannon limit.
Maximum Likelihood Timing and Carrier Synchronization in Burst-Mode Satellite Transmissions
Michele Morelli
2007-06-01
Full Text Available This paper investigates the joint maximum likelihood (ML estimation of the carrier frequency offset, timing error, and carrier phase in burst-mode satellite transmissions over an AWGN channel. The synchronization process is assisted by a training sequence appended in front of each burst and composed of alternating binary symbols. The use of this particular pilot pattern results into an estimation algorithm of affordable complexity that operates in a decoupled fashion. In particular, the frequency offset is measured first and independently of the other parameters. Timing and phase estimates are subsequently computed through simple closed-form expressions. The performance of the proposed scheme is investigated by computer simulation and compared with Cramer-Rao bounds. It turns out that the estimation accuracy is very close to the theoretical limits up to relatively low signal-to-noise ratios. This makes the algorithm well suited for turbo-coded transmissions operating near the Shannon limit.
Stone, Wesley W.; Gilliom, Robert J.; Crawford, Charles G.
2008-01-01
Regression models were developed for predicting annual maximum and selected annual maximum moving-average concentrations of atrazine in streams using the Watershed Regressions for Pesticides (WARP) methodology developed by the National Water-Quality Assessment Program (NAWQA) of the U.S. Geological Survey (USGS). The current effort builds on the original WARP models, which were based on the annual mean and selected percentiles of the annual frequency distribution of atrazine concentrations. Estimates of annual maximum and annual maximum moving-average concentrations for selected durations are needed to characterize the levels of atrazine and other pesticides for comparison to specific water-quality benchmarks for evaluation of potential concerns regarding human health or aquatic life. Separate regression models were derived for the annual maximum and annual maximum 21-day, 60-day, and 90-day moving-average concentrations. Development of the regression models used the same explanatory variables, transformations, model development data, model validation data, and regression methods as those used in the original development of WARP. The models accounted for 72 to 75 percent of the variability in the concentration statistics among the 112 sampling sites used for model development. Predicted concentration statistics from the four models were within a factor of 10 of the observed concentration statistics for most of the model development and validation sites. Overall, performance of the models for the development and validation sites supports the application of the WARP models for predicting annual maximum and selected annual maximum moving-average atrazine concentration in streams and provides a framework to interpret the predictions in terms of uncertainty. For streams with inadequate direct measurements of atrazine concentrations, the WARP model predictions for the annual maximum and the annual maximum moving-average atrazine concentrations can be used to characterize
Heat flow method to Lichnerowicz type equation on closed manifolds
Li MA; Sun, Yuhua
2010-01-01
In this paper, we establish existence results for positive solutions to the Lichnerowicz equation of the following type in closed manifolds -\\Delta u=A(x)u^{-p}-B(x)u^{q},\\quad in\\quad M, where $p>1, q>0$, and $A(x)>0$, $B(x)\\geq0$ are given smooth functions. Our analysis is based on the global existence of positive solutions to the following heat equation {ll} u_t-\\Delta u=A(x)u^{-p}-B(x)u^{q},\\quad in\\quad M\\times\\mathbb{R}^{+}, u(x,0)=u_0,\\quad in\\quad M with the positive smooth initial da...
Maximum Likelihood Estimation of the Identification Parameters and Its Correction
无
2002-01-01
By taking the subsequence out of the input-output sequence of a system polluted by white noise, anindependent observation sequence and its probability density are obtained and then a maximum likelihood estimation of theidentification parameters is given. In order to decrease the asymptotic error, a corrector of maximum likelihood (CML)estimation with its recursive algorithm is given. It has been proved that the corrector has smaller asymptotic error thanthe least square methods. A simulation example shows that the corrector of maximum likelihood estimation is of higherapproximating precision to the true parameters than the least square methods.
ASYMPTOTIC NORMALITY OF QUASI MAXIMUM LIKELIHOOD ESTIMATE IN GENERALIZED LINEAR MODELS
YUE LI; CHEN XIRU
2005-01-01
For the Generalized Linear Model (GLM), under some conditions including that the specification of the expectation is correct, it is shown that the Quasi Maximum Likelihood Estimate (QMLE) of the parameter-vector is asymptotic normal. It is also shown that the asymptotic covariance matrix of the QMLE reaches its minimum (in the positive-definte sense) in case that the specification of the covariance matrix is correct.
Gogarten J Peter
2002-02-01
Full Text Available Abstract Background Horizontal gene transfer (HGT played an important role in shaping microbial genomes. In addition to genes under sporadic selection, HGT also affects housekeeping genes and those involved in information processing, even ribosomal RNA encoding genes. Here we describe tools that provide an assessment and graphic illustration of the mosaic nature of microbial genomes. Results We adapted the Maximum Likelihood (ML mapping to the analyses of all detected quartets of orthologous genes found in four genomes. We have automated the assembly and analyses of these quartets of orthologs given the selection of four genomes. We compared the ML-mapping approach to more rigorous Bayesian probability and Bootstrap mapping techniques. The latter two approaches appear to be more conservative than the ML-mapping approach, but qualitatively all three approaches give equivalent results. All three tools were tested on mitochondrial genomes, which presumably were inherited as a single linkage group. Conclusions In some instances of interphylum relationships we find nearly equal numbers of quartets strongly supporting the three possible topologies. In contrast, our analyses of genome quartets containing the cyanobacterium Synechocystis sp. indicate that a large part of the cyanobacterial genome is related to that of low GC Gram positives. Other groups that had been suggested as sister groups to the cyanobacteria contain many fewer genes that group with the Synechocystis orthologs. Interdomain comparisons of genome quartets containing the archaeon Halobacterium sp. revealed that Halobacterium sp. shares more genes with Bacteria that live in the same environment than with Bacteria that are more closely related based on rRNA phylogeny . Many of these genes encode proteins involved in substrate transport and metabolism and in information storage and processing. The performed analyses demonstrate that relationships among prokaryotes cannot be accurately
Nadhir, Ahmad; Naba, Agus; Hiyama, Takashi
An optimal control for maximizing extraction of power in variable-speed wind energy conversion system is presented. Intelligent gradient detection by fuzzy inference system (FIS) in maximum power point tracking control is proposed to achieve power curve operating near optimal point. Speed rotor reference can be adjusted by maximum power point tracking fuzzy controller (MPPTFC) such that the turbine operates around maximum power. Power curve model can be modelled by using adaptive neuro fuzzy inference system (ANFIS). It is required to simply well estimate just a few number of maximum power points corresponding to optimum generator rotor speed under varying wind speed, implying its training can be done with less effort. Using the trained fuzzy model, some estimated maximum power points as well as their corresponding generator rotor speed and wind speed are determined, from which a linear wind speed feedback controller (LWSFC) capable of producing optimum generator speed can be obtained. Applied to a squirrel-cage induction generator based wind energy conversion system, MPPTFC and LWSFC could maximize extraction of the wind energy, verified by a power coefficient stay at its maximum almost all the time and an actual power line close to a maximum power efficiency line reference.
Iden, Sascha C.; Peters, Andre; Durner, Wolfgang
2015-11-01
The prediction of unsaturated hydraulic conductivity from the soil water retention curve by pore-bundle models is a cost-effective and widely applied technique. One problem for conductivity predictions from retention functions with continuous derivatives, i.e. continuous water capacity functions, is that the hydraulic conductivity curve exhibits a sharp drop close to water saturation if the pore-size distribution is wide. So far this artifact has been ignored or removed by introducing an explicit air-entry value into the capillary saturation function. However, this correction leads to a retention function which is not continuously differentiable. We present a new parameterization of the hydraulic properties which uses the original saturation function (e.g. of van Genuchten) and introduces a maximum pore radius only in the pore-bundle model. In contrast to models using an explicit air entry, the resulting conductivity function is smooth and increases monotonically close to saturation. The model concept can easily be applied to any combination of retention curve and pore-bundle model. We derive closed-form expressions for the unimodal and multimodal van Genuchten-Mualem models and apply the model concept to curve fitting and inverse modeling of a transient outflow experiment. Since the new model retains the smoothness and continuous differentiability of the retention model and eliminates the sharp drop in conductivity close to saturation, the resulting hydraulic functions are physically more reasonable and ideal for numerical simulations with the Richards equation or multiphase flow models.
Closed universe - Their future evolution and final state
Barrow, J. D.; Tipler, F. J.
1985-09-01
The authors summarize what is currently known about the future evolution and final state of closed universes: in mathematical language, those which have a compact Cauchy surface. It is shown that the existence of a maximal hypersurface (a time of maximum expansion) is a necessary and sufficient condition for the existence of an all-encompassing final singularity in a universe with a compact Cauchy surface. The only topologies which can admit maximal hypersurfaces are S3 and S2×S1, together with more complicated topologies formed from these two types of 3-manifold by connected summation and certain identifications. The relevance of these results to inflation is also discussed.
Moroz, Adam
2008-05-01
In this work we revise the applicability of the optimal control and variational approach to the maximum energy dissipation (MED) principle in non-equilibrium thermodynamics. The optimal control analogies for the kinetical and potential parts of thermodynamic Lagrangian (in the form of a sum of the positively defined thermodynamic potential and positively defined dissipative function) have been considered. An interpretation of thermodynamic momenta is discussed with respect to standard optimal control applications, which employ dynamic constraints. Also included is interpretation in terms of the least action principle.
Social closeness and feedback modulate susceptibility to the framing effect.
Sip, Kamila E; Smith, David V; Porcelli, Anthony J; Kar, Kohitij; Delgado, Mauricio R
2015-01-01
Although we often seek social feedback (SFB) from others to help us make decisions, little is known about how SFB affects decisions under risk, particularly from a close peer. We conducted two experiments using an established framing task to probe how decision-making is modulated by SFB valence (positive, negative) and the level of closeness with feedback provider (friend, confederate). Participants faced mathematically equivalent decisions framed as either an opportunity to keep (gain frame) or lose (loss frame) part of an initial endowment. Periodically, participants were provided with positive (e.g., "Nice!") or negative (e.g., "Lame!") feedback about their choices. Such feedback was provided by either a confederate (Experiment 1) or a gender-matched close friend (Experiment 2). As expected, the framing effect was observed in both experiments. Critically, an individual's susceptibility to the framing effect was modulated by the valence of the SFB, but only when the feedback provider was a close friend. This effect was reflected in the activation patterns of ventromedial prefrontal cortex and posterior cingulate cortex, regions involved in complex decision-making. Taken together, these results highlight social closeness as an important factor in understanding the impact of SFB on neural mechanisms of decision-making.
Closed String Tachyon Driving $f(R)$ Cosmology
Wang, Peng; Yang, Haitang
2016-01-01
To study quantum effects on the bulk tachyon dynamics, we replace $R$ with $f(R)$ in the low-energy effective action that couples gravity, the dilaton, and the bulk closed string tachyon of bosonic closed string theory and study properties of their classical solutions. The $\\alpha^{\\prime}$ corrections of the graviton-dilaton-tachyon system are implemented in the $f(R)$. We obtain the tachyon-induced rolling solutions and show that the string metric does not need to remain fixed in some cases. The singular behavior of more classical solutions are investigated and found to be modified by quantum effects. In particular, there could exist some classical solutions, in which the tachyon field rolls down from a maximum of the tachyon potential while the dilaton expectation value is always bounded from above during the rolling process.
Millisecond Pulsars in Close Binaries
Tauris, Thomas M
2015-01-01
In this Habilitationsschrift (Habilitation thesis) I present my research carried out over the last four years at the Argelander Institute for Astronomy (AIfA) and the Max Planck Institute for Radio Astronomy (MPIfR). The thesis summarizes my main findings and has been written to fulfill the requirements for the Habilitation qualification at the University of Bonn. Although my work is mainly focused on the topic of millisecond pulsars (MSPs), there is a fairly broad spread of research areas ranging from the formation of neutron stars (NSs) in various supernova (SN) events, to their evolution, for example, via accretion processes in binary and triple systems, and finally to their possible destruction in merger events. The thesis is organized in the following manner: A general introduction to neutron stars and millisecond pulsars is given in Chapter 1. A selection of key papers published in 2011-2014 are presented in Chapters 2-10, ordered within five main research areas (ultra-stripped SNe in close binaries, ma...
Close Binaries, Triples, and Eclipses
Sanborn, Jason; Zavala, R. T.
2013-01-01
Observations of the variable radio source b Per (HR1324) are part of an ongoing survey of close binary systems using the Navy Precision Optical Interferometer. Historical observations of b Per include sparse photometric and spectroscopic observations dating back to 1923, clearly showing this object to be a non-eclipsing, single-lined ellipsoidal variable. This is where the story for b Per stopped until recent inclusion of optical interferometric data which led to the detection of a third, long-period component. As the interferometric observations continue to build up so to is the understanding of this binary system, with the modeled orbital parameters pointing to an edge-on orientation that may allow for the detection of an eclipse by the long-period component. These types of eclipse events are quite rare for long-period binaries due to the nearly edge-on orientation required for their detection, leaving open the opportunity for more traditional methods of observation to add to the body of knowledge concerning this understudied system. Here we present the latest observational data of the b Per system along with an introduction to the best fit orbital parameters governing the eclipsing nature of this complex triple-system.
Skrubbeltrang, Lotte Stausgaard; Rasmussen, Annette
In ethnographic research the direct involvement and long-term engagement of the researcher constitute key elements. Acknowledgements of numerous publications resulting from ethnographic studies illustrate that the researchers are often deeply indebted to the research subjects for allowing the res......, and to ensure that the subjects under scrutiny are not subject to ethical violations. With this in mind the above dilemmas of proximity will be addressed and discussed in our paper....... having gained access to participate in and describe the lives of the participants of a given context, the next ethical question facing the researcher is the one of involvement. Again, the researcher has an interest in obtaining as much confidence as possible, whereas the interest of the observed subjects...... might be more dubious and a matter of difficulty to handle by the researcher. The obvious dilemma of conflicting interests and difficult handling of proximity is our focus of interest in this paper: One side of this dilemma is to ask the question, how close you need to go to obtain the confidence...
The Application of Maximum Principle in Supply Chain Cost Optimization
Zhou Ling; Wang Jun
2013-01-01
In this paper, using the maximum principle for analyzing dynamic cost, we propose a new two-stage supply chain model of the manufacturing-assembly mode for high-tech perishable products supply chain...
Maximum Principle for Nonlinear Cooperative Elliptic Systems on IR N
LEADI Liamidi; MARCOS Aboubacar
2011-01-01
We investigate in this work necessary and sufficient conditions for having a Maximum Principle for a cooperative elliptic system on the whole (IR)N.Moreover,we prove the existence of solutions by an approximation method for the considered system.
Maximum Likelihood Factor Structure of the Family Environment Scale.
Fowler, Patrick C.
1981-01-01
Presents the maximum likelihood factor structure of the Family Environment Scale. The first bipolar dimension, "cohesion v conflict," measures relationship-centered concerns, while the second unipolar dimension is an index of "organizational and control" activities. (Author)
Multiresolution maximum intensity volume rendering by morphological adjunction pyramids
Roerdink, Jos B.T.M.
We describe a multiresolution extension to maximum intensity projection (MIP) volume rendering, allowing progressive refinement and perfect reconstruction. The method makes use of morphological adjunction pyramids. The pyramidal analysis and synthesis operators are composed of morphological 3-D
Multiresolution Maximum Intensity Volume Rendering by Morphological Adjunction Pyramids
Roerdink, Jos B.T.M.
2001-01-01
We describe a multiresolution extension to maximum intensity projection (MIP) volume rendering, allowing progressive refinement and perfect reconstruction. The method makes use of morphological adjunction pyramids. The pyramidal analysis and synthesis operators are composed of morphological 3-D
Water Quality Assessment and Total Maximum Daily Loads Information (ATTAINS)
U.S. Environmental Protection Agency — The Water Quality Assessment TMDL Tracking And Implementation System (ATTAINS) stores and tracks state water quality assessment decisions, Total Maximum Daily Loads...
Combining Experiments and Simulations Using the Maximum Entropy Principle
Boomsma, Wouter; Ferkinghoff-Borg, Jesper; Lindorff-Larsen, Kresten
2014-01-01
are not in quantitative agreement with experimental data. The principle of maximum entropy is a general procedure for constructing probability distributions in the light of new data, making it a natural tool in cases when an initial model provides results that are at odds with experiments. The number of maximum entropy...... in the context of a simple example, after which we proceed with a real-world application in the field of molecular simulations, where the maximum entropy procedure has recently provided new insight. Given the limited accuracy of force fields, macromolecular simulations sometimes produce results....... Three very recent papers have explored this problem using the maximum entropy approach, providing both new theoretical and practical insights to the problem. We highlight each of these contributions in turn and conclude with a discussion on remaining challenges....
On the sufficiency of the linear maximum principle
Vidal, Rene Victor Valqui
1987-01-01
Presents a family of linear maximum principles for the discrete-time optimal control problem, derived from the saddle-point theorem of mathematical programming. Some simple examples illustrate the applicability of the main theoretical results...
Maximum Photovoltaic Penetration Levels on Typical Distribution Feeders: Preprint
Hoke, A.; Butler, R.; Hambrick, J.; Kroposki, B.
2012-07-01
This paper presents simulation results for a taxonomy of typical distribution feeders with various levels of photovoltaic (PV) penetration. For each of the 16 feeders simulated, the maximum PV penetration that did not result in steady-state voltage or current violation is presented for several PV location scenarios: clustered near the feeder source, clustered near the midpoint of the feeder, clustered near the end of the feeder, randomly located, and evenly distributed. In addition, the maximum level of PV is presented for single, large PV systems at each location. Maximum PV penetration was determined by requiring that feeder voltages stay within ANSI Range A and that feeder currents stay within the ranges determined by overcurrent protection devices. Simulations were run in GridLAB-D using hourly time steps over a year with randomized load profiles based on utility data and typical meteorological year weather data. For 86% of the cases simulated, maximum PV penetration was at least 30% of peak load.