WorldWideScience

Sample records for maximum acceptable level

  1. Acceptable noise level

    DEFF Research Database (Denmark)

    Olsen, Steen Østergaard; Nielsen, Lars Holme; Lantz, Johannes

    2012-01-01

    The acceptable noise level (ANL) is used to quantify the amount of background noise that subjects can accept while listening to speech, and is suggested for prediction of individual hearing-aid use. The aim of this study was to assess the repeatability of the ANL measured in normal-hearing subjects...... using running Danish and non-semantic speech materials as stimuli and modulated speech-spectrum and multi-talker babble noises as competing stimuli....

  2. Acceptable noise level

    DEFF Research Database (Denmark)

    Olsen, Steen Østergaard; Nielsen, Lars Holme; Lantz, Johannes

    2012-01-01

    The acceptable noise level (ANL) is used to quantify the amount of background noise that subjects can accept while listening to speech, and is suggested for prediction of individual hearing-aid use. The aim of this study was to assess the repeatability of the ANL measured in normal-hearing subjec...... using running Danish and non-semantic speech materials as stimuli and modulated speech-spectrum and multi-talker babble noises as competing stimuli....

  3. A Fourier analysis on the maximum acceptable grid size for discrete proton beam dose calculation

    International Nuclear Information System (INIS)

    Li, Haisen S.; Romeijn, H. Edwin; Dempsey, James F.

    2006-01-01

    We developed an analytical method for determining the maximum acceptable grid size for discrete dose calculation in proton therapy treatment plan optimization, so that the accuracy of the optimized dose distribution is guaranteed in the phase of dose sampling and the superfluous computational work is avoided. The accuracy of dose sampling was judged by the criterion that the continuous dose distribution could be reconstructed from the discrete dose within a 2% error limit. To keep the error caused by the discrete dose sampling under a 2% limit, the dose grid size cannot exceed a maximum acceptable value. The method was based on Fourier analysis and the Shannon-Nyquist sampling theorem as an extension of our previous analysis for photon beam intensity modulated radiation therapy [J. F. Dempsey, H. E. Romeijn, J. G. Li, D. A. Low, and J. R. Palta, Med. Phys. 32, 380-388 (2005)]. The proton beam model used for the analysis was a near mono-energetic (of width about 1% the incident energy) and monodirectional infinitesimal (nonintegrated) pencil beam in water medium. By monodirection, we mean that the proton particles are in the same direction before entering the water medium and the various scattering prior to entrance to water is not taken into account. In intensity modulated proton therapy, the elementary intensity modulation entity for proton therapy is either an infinitesimal or finite sized beamlet. Since a finite sized beamlet is the superposition of infinitesimal pencil beams, the result of the maximum acceptable grid size obtained with infinitesimal pencil beam also applies to finite sized beamlet. The analytic Bragg curve function proposed by Bortfeld [T. Bortfeld, Med. Phys. 24, 2024-2033 (1997)] was employed. The lateral profile was approximated by a depth dependent Gaussian distribution. The model included the spreads of the Bragg peak and the lateral profiles due to multiple Coulomb scattering. The dependence of the maximum acceptable dose grid size on the

  4. Methodology for determining acceptable residual radioactive contamination levels at decommissioned nuclear facilities/sites

    International Nuclear Information System (INIS)

    Watson, E.C.; Kennedy, W.E. Jr.; Hoenes, G.R.; Waite, D.A.

    1979-01-01

    The ultimate disposition of decommissioned nuclear facilities and their surrrounding sites depends upon the degree and type of residual contamination. Examination of existing guidelines and regulations has led to the conclusion that there is a need for a general method to derive residual radioactive contamination levels that are acceptable for public use of any decommissioned nuclear facility or site. This paper describes a methodology for determining acceptable residual radioactive contamination levels based on the concept of limiting the annual dose to members of the public. It is not the purpose of this paper to recommend or even propose dose limits for the exposure of the public to residual radioactive contamination left at decommissioned nuclear facilities or sites. Unrestricted release of facilities and/or land is based on the premise that the potential annual dose to any member of the public using this property from all possible exposure pathways will not exceed appropriate limits as may be defined by Federal regulatory agencies. For decommissioned land areas, consideration should be given to people living directly on previously contaminated areas, growing crops, grazing food animals and using well water. Mixtures of radionuclides in the residual contamination representative of fuel reprocessing plants, light water reactors and their respective sites are presented. These mixtures are then used to demonstrate the methodology. Example acceptable residual radioactive contamination levels, based on an assumed maximum annual dose of one millirem, are calculated for several selected times following shutdown of a facility. It is concluded that the methodology presented in this paper results in defensible acceptable residual contamination levels that are directly relatable to risk assessment with the proviso that an acceptable limit to the maximum annual dose will be established. (author)

  5. 40 CFR 141.13 - Maximum contaminant levels for turbidity.

    Science.gov (United States)

    2010-07-01

    ... turbidity. 141.13 Section 141.13 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER... Maximum contaminant levels for turbidity. The maximum contaminant levels for turbidity are applicable to... part. The maximum contaminant levels for turbidity in drinking water, measured at a representative...

  6. 40 CFR 141.62 - Maximum contaminant levels for inorganic contaminants.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Maximum contaminant levels for inorganic contaminants. 141.62 Section 141.62 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Water Regulations: Maximum Contaminant Levels and Maximum Residual Disinfectant Levels § 141.62 Maximum...

  7. 40 CFR 141.61 - Maximum contaminant levels for organic contaminants.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Maximum contaminant levels for organic contaminants. 141.61 Section 141.61 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER... Regulations: Maximum Contaminant Levels and Maximum Residual Disinfectant Levels § 141.61 Maximum contaminant...

  8. 5 CFR 531.409 - Acceptable level of competence determinations.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Acceptable level of competence... REGULATIONS PAY UNDER THE GENERAL SCHEDULE Within-Grade Increases § 531.409 Acceptable level of competence... delegated shall determine which employees are performing at an acceptable level of competence. (b) Basis for...

  9. 40 CFR 141.63 - Maximum contaminant levels (MCLs) for microbiological contaminants.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Maximum contaminant levels (MCLs) for microbiological contaminants. 141.63 Section 141.63 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Water Regulations: Maximum Contaminant Levels and Maximum Residual Disinfectant Levels § 141.63 Maximum...

  10. Investigation on the acceptance level of radiation exposure. Comparison of Chinese and Japanese

    International Nuclear Information System (INIS)

    Wu, Jin; Katoh, Kazuaki

    1999-01-01

    Safety standards must be determined with the contract between a society and the person concerned, i.e. the agreement in a social community. Individual understandings on the (ionizing) radiation should be proper and uniform as far as possible, just in the case. The individual acceptable radiation dose level of a constituent of a community is one of the key roles for radiation managements and also coping with radiofobia (persons who have hatred and/or allergic syndromes for the radiation). The authors have obtained information by means of questionnaires on the acceptable dose levels of the radiation for 2 groups in a community, the one is a medical science group and the other is a science-technology group in both countries, China and Japan. The annual natural radiation dose etc. are described with inquiries to preclude meaningless responses. The levels of the acceptable radiation dose are different in individuals and show wide distributions. The gap between the two acceptable dose levels for a person is narrow, i.e. the one is the minimum radiation dose that a person rejects with dread and the other is the maximum dose that a person does not have any anxiety. The Japanese science-technology group shows the significant higher dose than that of the Chinese science-technology group. The Chinese medical science group shows the significant higher dose than that of the Chinese science-technology group. The Japanese medical science group does not show the statistically significant difference from the Japanese science-technology group. A perception for the radiation exposure and safety is unexpectedly scattered from person to person even though among the high-level intellectual groups mentioned above. There is no difference on this scattering between the Japan and China. (Y. Tanaka)

  11. Maximum Acceptable Weight of Lift reflects peak lumbosacral extension moments in a Functional Capacity Evaluation test using free style, stoop, and squat lifting

    OpenAIRE

    Kuijer, P.P.F.M.; van Oostrom, S.H.; Duijzer, K.; van Dieen, J.H.

    2012-01-01

    It is unclear whether the maximum acceptable weight of lift (MAWL), a common psychophysical method, reflects joint kinetics when different lifting techniques are employed. In a within-participants study (n = 12), participants performed three lifting techniques - free style, stoop and squat lifting from knee to waist level - using the same dynamic functional capacity evaluation lifting test to assess MAWL and to calculate low back and knee kinetics. We assessed which knee and back kinetic para...

  12. An approach for determining the acceptable levels of nuclear risk

    International Nuclear Information System (INIS)

    1978-03-01

    The objective of this study was to develop a methodology for determining the acceptable levels of risk with respect to nuclear energy. It was concluded that the Atomic Energy Control Board should identify the interest groups that affect its choice of an acceptable level of risk, determine their expectations, and balance the expectations of the various groups such that the resulting acceptable level of risk is still acceptable to the Board. This would be done by interviewing experts on the subject of nuclear safety, developing and pretesting a public questionnaire, and surveying the public on acceptable cost-risk combinations

  13. Acceptable level of radiation risk and its perception

    International Nuclear Information System (INIS)

    Kusama, Tomoko; Shinozaki, Motoshi; Yoshizawa, Yasuo

    1987-01-01

    The acceptable level of radiation risk for public members, that is 10 -5 /y, was proposed by ICRP and other international organizations. We studied to survey basic procedures of deriving this value and to derive an acceptable risk value in Japan by using similar procedures. The basic procedures to derive 10 -5 /y were found as follows; (1) 0.1 percent of annual mortality from all diseases, (2) 0.1 percent of life time risk, (3) one percent of mortality from all causes in each age cohort and (4) corresponding value to 1 mSv annual radiation exposure. From these bases we derived the value of 10 -5 /y as acceptable risk level in Japan. The perception to risk level of 10 -5 /y in conventional life was investigated by means of questionnaires for 1,095 college students living in Tokyo. The risks considered in this study were natural background radiation, coffee, skiing, X-ray diagnosis, spontaneous cancer, passive smoking and air pollution. The most acceptable risk was the risk related with natural background radiation. And the risk of natural background radiation was more easily accepted by the students who had knowledges on natural background radiation. On the other hand, the risk from air pollution or passive smoking was the most adverse one. (author)

  14. Differentiated influences of benefit and risk perceptions on nuclear power acceptance according to acceptance levels. Evidence from Korea

    International Nuclear Information System (INIS)

    Roh, Seungkook; Lee Jinwon

    2017-01-01

    The perceived benefit and risk of nuclear power generation have received considerable attention as determinants of the public's nuclear power acceptance. However, the contingency of the relative importance of these benefit and risk has been less explored. Using Korea as an example, this study explores the possibility that the relative importance of perceived benefit and risk on nuclear power acceptance depends on acceptance levels. Our results from latent class analysis and multinomial probit show that, in determining whether an individual shows a moderate level of nuclear power acceptance rather than a low level, perceived risk plays a dominant role compared to perceived benefit; however, regarding whether he/she shows a high level of nuclear power acceptance rather than a moderate level, this relative importance is reversed. These results carry practical implications for risk governance of nuclear power, particularly with regard to communication with the public. (author)

  15. Acceptable level of radiation risk and its perception

    Energy Technology Data Exchange (ETDEWEB)

    Kusama, Tomoko; Shinozaki, Motoshi; Yoshizawa, Yasuo

    1987-03-01

    The acceptable level of radiation risk for public members, that is 10/sup -5//y, was proposed by ICRP and other international organizations. We studied to survey basic procedures of deriving this value and to derive an acceptable risk value in Japan by using similar procedures. The basic procedures to derive 10/sup -5//y were found as follows; (1) 0.1 percent of annual mortality from all diseases, (2) 0.1 percent of life time risk, (3) one percent of mortality from all causes in each age cohort and (4) corresponding value to 1 mSv annual radiation exposure. From these bases we derived the value of 10/sup -5//y as acceptable risk level in Japan. The perception to risk level of 10/sup -5//y in conventional life was investigated by means of questionnaires for 1,095 college students living in Tokyo. The risks considered in this study were natural background radiation, coffee, skiing, X-ray diagnosis, spontaneous cancer, passive smoking and air pollution. The most acceptable risk was the risk related with natural background radiation. And the risk of natural background radiation was more easily accepted by the students who had knowledges on natural background radiation. On the other hand, the risk from air pollution or passive smoking was the most adverse one.

  16. Strain-based plastic instability acceptance criteria for ferritic steel safety class 1 nuclear components under level D

    International Nuclear Information System (INIS)

    Kim, Ji Su; Lee, Han Sang; Kim, Yun Jae; Kim, Jong Sung; Kim, Jin Won

    2015-01-01

    This paper proposes strain-based acceptance criteria for assessing plastic instability of the safety class 1 nuclear components made of ferritic steel during level D service loads. The strain-based criteria were proposed with two approaches: (1) a section average approach and (2) a critical location approach. Both approaches were based on the damage initiation point corresponding to the maximum load-carrying capability point instead of the fracture point via tensile tests and finite element analysis (FEA) for the notched specimen under uni-axial tensile loading. The two proposed criteria were reviewed from the viewpoint of design practice and philosophy to select a more appropriate criterion. As a result of the review, it was found that the section average approach is more appropriate than the critical location approach from the viewpoint of design practice and philosophy. Finally, the criterion based on the section average approach was applied to a simplified reactor pressure vessel (RPV) outlet nozzle subject to SSE loads. The application shows that the strain-based acceptance criteria can consider cumulative damages caused by the sequential loads unlike the stress-based acceptance criteria and can reduce the over conservatism of the stress-based acceptance criteria, which often occurs for level D service loads.

  17. Strain-based plastic instability acceptance criteria for ferritic steel safety class 1 nuclear components under level D

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ji Su; Lee, Han Sang; Kim, Yun Jae [Dept. of Mechanical Engineering, Korea University, Seoul (Korea, Republic of); Kim, Jong Sung [Dept. of Mechanical Engineering, Sunchon National University, Suncheon (Korea, Republic of); Kim, Jin Won [Dept. of Nuclear Engineering, Chosun University, Gwangju (Korea, Republic of)

    2015-04-15

    This paper proposes strain-based acceptance criteria for assessing plastic instability of the safety class 1 nuclear components made of ferritic steel during level D service loads. The strain-based criteria were proposed with two approaches: (1) a section average approach and (2) a critical location approach. Both approaches were based on the damage initiation point corresponding to the maximum load-carrying capability point instead of the fracture point via tensile tests and finite element analysis (FEA) for the notched specimen under uni-axial tensile loading. The two proposed criteria were reviewed from the viewpoint of design practice and philosophy to select a more appropriate criterion. As a result of the review, it was found that the section average approach is more appropriate than the critical location approach from the viewpoint of design practice and philosophy. Finally, the criterion based on the section average approach was applied to a simplified reactor pressure vessel (RPV) outlet nozzle subject to SSE loads. The application shows that the strain-based acceptance criteria can consider cumulative damages caused by the sequential loads unlike the stress-based acceptance criteria and can reduce the over conservatism of the stress-based acceptance criteria, which often occurs for level D service loads.

  18. 40 CFR 141.51 - Maximum contaminant level goals for inorganic contaminants.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Maximum contaminant level goals for inorganic contaminants. 141.51 Section 141.51 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Maximum Contaminant Level...

  19. 40 CFR 141.50 - Maximum contaminant level goals for organic contaminants.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Maximum contaminant level goals for organic contaminants. 141.50 Section 141.50 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Maximum Contaminant Level...

  20. 40 CFR 141.52 - Maximum contaminant level goals for microbiological contaminants.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Maximum contaminant level goals for microbiological contaminants. 141.52 Section 141.52 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Maximum Contaminant Level...

  1. Acceptance criteria for deposition of low-level and intermediate-level radiation levels radioactive wastes

    International Nuclear Information System (INIS)

    2002-09-01

    This norm establishes the criteria for acceptance low and intermediate radiation level for safe deposition in repositories, for assuring the protection of workers, population and environment against the hazardous effects of the ionizing radiations. The criteria of this norm applies to the low and intermediate radiation levels

  2. Effect of background music on maximum acceptable weight of manual lifting tasks.

    Science.gov (United States)

    Yu, Ruifeng

    2014-01-01

    This study used the psychophysical approach to investigate the impact of tempo and volume of background music on the maximum acceptable weight of lift (MAWL), heart rate (HR) and rating of perceived exertion (RPE) of participants engaged in lifting. Ten male college students participated in this study. They lifted a box from the floor, walked 1-2 steps as required, placed the box on a table and walked back twice per minute. The results showed that the tempo of music had a significant effect on both MAWL and HR. Fast tempo background music resulted in higher MAWL and HR values than those resulting from slow tempo music. The effects of both the tempo and volume on the RPE were insignificant. The results of this study suggest fast tempo background music may be used in manual materials handling tasks to increase performance without increasing perceived exertion because of its ergogenic effect on human psychology and physiology.

  3. Maximum penetration level of distributed generation without violating voltage limits

    NARCIS (Netherlands)

    Morren, J.; Haan, de S.W.H.

    2009-01-01

    Connection of Distributed Generation (DG) units to a distribution network will result in a local voltage increase. As there will be a maximum on the allowable voltage increase, this will limit the maximum allowable penetration level of DG. By reactive power compensation (by the DG unit itself) a

  4. Defining acceptable levels for ecological indicators: an approach for considering social values.

    Science.gov (United States)

    Smyth, Robyn L; Watzin, Mary C; Manning, Robert E

    2007-03-01

    Ecological indicators can facilitate an adaptive management approach, but only if acceptable levels for those indicators have been defined so that the data collected can be interpreted. Because acceptable levels are an expression of the desired state of the ecosystem, the process of establishing acceptable levels should incorporate not just ecological understanding but also societal values. The goal of this research was to explore an approach for defining acceptable levels of ecological indicators that explicitly considers social perspectives and values. We used a set of eight indicators that were related to issues of concern in the Lake Champlain Basin. Our approach was based on normative theory. Using a stakeholder survey, we measured respondent normative evaluations of varying levels of our indicators. Aggregated social norm curves were used to determine the level at which indicator values shifted from acceptable to unacceptable conditions. For seven of the eight indicators, clear preferences were interpretable from these norm curves. For example, closures of public beaches because of bacterial contamination and days of intense algae bloom went from acceptable to unacceptable at 7-10 days in a summer season. Survey respondents also indicated that the number of fish caught from Lake Champlain that could be safely consumed each month was unacceptably low and the number of streams draining into the lake that were impaired by storm water was unacceptably high. If indicators that translate ecological conditions into social consequences are carefully selected, we believe the normative approach has considerable merit for defining acceptable levels of valued ecological system components.

  5. Measurement of Acceptable Noise Level with Background Music.

    Science.gov (United States)

    Ahn, Hyun-Jung; Bahng, Junghwa; Lee, Jae Hee

    2015-09-01

    Acceptable noise level (ANL) is a measure of the maximum background noise level (BNL) that a person is willing to tolerate while following a target story. Although researchers have used various sources of target sound in ANL measures, a limited type of background noise has been used. Extending the previous study of Gordon-Hickey & Moore (2007), the current study determined the effect of music genre and tempo on ANLs as possible factors affecting ANLs. We also investigated the relationships between individual ANLs and the familiarity of music samples and between music ANLs and subjective preference. Forty-one participants were seperated into two groups according to their ANLs, 29 low-ANL listeners and 12 high-ANL listeners. Using Korean ANL material, the individual ANLs were measured based on the listeners' most comfortable listening level and BNL. The ANLs were measured in six conditions, with different music tempo (fast, slow) and genre (K-pop, pop, classical) in a counterbalanced order. Overall, ANLs did not differ by the tempo of background music, but music genre significantly affected individual ANLs. We observed relatively higher ANLs with K-pop music and relatively lower ANLs with classical music. This tendency was similar in both low-ANL and high-ANL groups. However, the subjective ratings of music familiarity and preference affected ANLs differently for low-ANL and high-ANL groups. In contrast to the low-ANL listeners, the ANLs of the high-ANL listeners were significantly affected by music familiarity and preference. The genre of background music affected ANLs obtained using background music. The degree of music familiarity and preference appears to be associated with individual susceptibility to background music only for listeners who are greatly annoyed by background noise (high-ANL listeners).

  6. Acceptable levels of digital image compression in chest radiology

    International Nuclear Information System (INIS)

    Smith, I.

    2000-01-01

    The introduction of picture archival and communications systems (PACS) and teleradiology has prompted an examination of techniques that optimize the storage capacity and speed of digital storage and distribution networks. The general acceptance of the move to replace conventional screen-film capture with computed radiography (CR) is an indication that clinicians within the radiology community are willing to accept images that have been 'compressed'. The question to be answered, therefore, is what level of compression is acceptable. The purpose of the present study is to provide an assessment of the ability of a group of imaging professionals to determine whether an image has been compressed. To undertake this study a single mobile chest image, selected for the presence of some subtle pathology in the form of a number of septal lines in both costphrenic angles, was compressed to levels of 10:1, 20:1 and 30:1. These images were randomly ordered and shown to the observers for interpretation. Analysis of the responses indicates that in general it was not possible to distinguish the original image from its compressed counterparts. Furthermore, a preference appeared to be shown for images that have undergone low levels of compression. This preference can most likely be attributed to the 'de-noising' effect of the compression algorithm at low levels. Copyright (1999) Blackwell Science Pty. Ltd

  7. Acceptance Test Report for the 241-AZ-101 Ultrasonic Interface Level Analyzer

    International Nuclear Information System (INIS)

    ANDREWS, J.E.

    2000-01-01

    This document comprises the Acceptance Test Report for the 241-AZ-101 Ultrasonic Interface Level Analyzer. This document presents the results of Acceptance Testing of the 241-AZ-101 Ultrasonic Interface Level Analyzers (URSILLAs). Testing of the URSILLAs was performed in accordance with ATP-260-001, ''URSILLA Pre-installation Acceptance Test Procedure''. The objective of the testing was to verify that all equipment and components function in accordance with design specifications and original equipment manufacturer's specifications

  8. Improving the safety of Ukrainian NPP to reach an internationally accepted level

    International Nuclear Information System (INIS)

    Bozhko, S.; Helske, J.; Janke, R.; Mayoral, C.

    2013-01-01

    This paper summarizes the safety status and the modernization progress of Ukrainian NPPs towards an internationally accepted level of safety. After a brief discussion of the concept of what is called an 'international accepted level' for new and operating NPPs, the status of Russian type WWER and in particular the Ukrainian NPPs is presented. Then, the performed investigations of the gaps between international accepted level and the original status of Ukrainian NPPs are presented. The safety objectives of the modernization programs, some examples of defence in depth improvements, and an overall view of the modernization programs of Ukrainian NPPs are produced. Then, few important safety improvements implemented at the oldest Ukrainian WWER-1000 South Ukraine-1 are given in more detail. Finally, a conclusion presents the current status on the way to fulfill the national safety targets and to reach an internationally accepted level for all the Ukrainian NPPs. The paper is followed by the slides of the presentation. (authors)

  9. The effect of hearing aid signal-processing schemes on acceptable noise levels: perception and prediction.

    Science.gov (United States)

    Wu, Yu-Hsiang; Stangl, Elizabeth

    2013-01-01

    The acceptable noise level (ANL) test determines the maximum noise level that an individual is willing to accept while listening to speech. The first objective of the present study was to systematically investigate the effect of wide dynamic range compression processing (WDRC), and its combined effect with digital noise reduction (DNR) and directional processing (DIR), on ANL. Because ANL represents the lowest signal-to-noise ratio (SNR) that a listener is willing to accept, the second objective was to examine whether the hearing aid output SNR could predict aided ANL across different combinations of hearing aid signal-processing schemes. Twenty-five adults with sensorineural hearing loss participated in the study. ANL was measured monaurally in two unaided and seven aided conditions, in which the status of the hearing aid processing schemes (enabled or disabled) and the location of noise (front or rear) were manipulated. The hearing aid output SNR was measured for each listener in each condition using a phase-inversion technique. The aided ANL was predicted by unaided ANL and hearing aid output SNR, under the assumption that the lowest acceptable SNR at the listener's eardrum is a constant across different ANL test conditions. Study results revealed that, on average, WDRC increased (worsened) ANL by 1.5 dB, while DNR and DIR decreased (improved) ANL by 1.1 and 2.8 dB, respectively. Because the effects of WDRC and DNR on ANL were opposite in direction but similar in magnitude, the ANL of linear/DNR-off was not significantly different from that of WDRC/DNR-on. The results further indicated that the pattern of ANL change across different aided conditions was consistent with the pattern of hearing aid output SNR change created by processing schemes. Compared with linear processing, WDRC creates a noisier sound image and makes listeners less willing to accept noise. However, this negative effect on noise acceptance can be offset by DNR, regardless of microphone mode

  10. Acceptance Test Report for the 241-AZ-101 Ultrasonic Interface Level Analyzer

    Energy Technology Data Exchange (ETDEWEB)

    ANDREWS, J.E.

    2000-01-27

    This document comprises the Acceptance Test Report for the 241-AZ-101 Ultrasonic Interface Level Analyzer. This document presents the results of Acceptance Testing of the 241-AZ-101 Ultrasonic Interface Level Analyzers (URSILLAs). Testing of the URSILLAs was performed in accordance with ATP-260-001, ''URSILLA Pre-installation Acceptance Test Procedure''. The objective of the testing was to verify that all equipment and components function in accordance with design specifications and original equipment manufacturer's specifications.

  11. Three-level grid-connected photovoltaic inverter with maximum power point tracking

    International Nuclear Information System (INIS)

    Tsang, K.M.; Chan, W.L.

    2013-01-01

    Highlight: ► This paper reports a novel 3-level grid connected photovoltaic inverter. ► The inverter features maximum power point tracking and grid current shaping. ► The inverter can be acted as an active filter and a renewable power source. - Abstract: This paper presents a systematic way of designing control scheme for a grid-connected photovoltaic (PV) inverter featuring maximum power point tracking (MPPT) and grid current shaping. Unlike conventional design, only four power switches are required to achieve three output levels and it is not necessary to use any phase-locked-loop circuitry. For the proposed scheme, a simple integral controller has been designed for the tracking of the maximum power point of a PV array based on an improved extremum seeking control method. For the grid-connected inverter, a current loop controller and a voltage loop controller have been designed. The current loop controller is designed to shape the inverter output current while the voltage loop controller can maintain the capacitor voltage at a certain level and provide a reference inverter output current for the PV inverter without affecting the maximum power point of the PV array. Experimental results are included to demonstrate the effectiveness of the tracking and control scheme.

  12. Maximum Acceptable Weight of Lift reflects peak lumbosacral extension moments in a Functional Capacity Evaluation test using free style, stoop, and squat lifting

    NARCIS (Netherlands)

    Kuijer, P.P.F.M.; van Oostrom, S.H.; Duijzer, K.; van Dieen, J.H.

    2012-01-01

    It is unclear whether the maximum acceptable weight of lift (MAWL), a common psychophysical method, reflects joint kinetics when different lifting techniques are employed. In a within-participants study (n = 12), participants performed three lifting techniques - free style, stoop and squat lifting

  13. Maximum acceptable weight of lift reflects peak lumbosacral extension moments in a functional capacity evaluation test using free style, stoop and squat lifting

    NARCIS (Netherlands)

    Kuijer, P. P. F. M.; van Oostrom, S. H.; Duijzer, K.; van Dieën, J. H.

    2012-01-01

    It is unclear whether the maximum acceptable weight of lift (MAWL), a common psychophysical method, reflects joint kinetics when different lifting techniques are employed. In a within-participants study (n = 12), participants performed three lifting techniques - free style, stoop and squat lifting

  14. Public acceptance for centralized storage and repositories of low-level waste session (Panel)

    Energy Technology Data Exchange (ETDEWEB)

    Lutz, H.R.

    1995-12-31

    Participants from various parts of the world will provide a summary of their particular country`s approach to low-level waste management and the cost of public acceptance for low-level waste management facilities. Participants will discuss the number, geographic location, and type of low-level waste repositories and centralized storage facilities located in their countries. Each will discuss the amount, distribution, and duration of funds to gain public acceptance of these facilities. Participants will provide an estimated $/meter for centralized storage facilities and repositories. The panel will include a brief discussion about the ethical aspects of public acceptance costs, approaches for negotiating acceptance, and lessons learned in each country. The audience is invited to participate in the discussion.

  15. The application of a Grey Markov Model to forecasting annual maximum water levels at hydrological stations

    Science.gov (United States)

    Dong, Sheng; Chi, Kun; Zhang, Qiyi; Zhang, Xiangdong

    2012-03-01

    Compared with traditional real-time forecasting, this paper proposes a Grey Markov Model (GMM) to forecast the maximum water levels at hydrological stations in the estuary area. The GMM combines the Grey System and Markov theory into a higher precision model. The GMM takes advantage of the Grey System to predict the trend values and uses the Markov theory to forecast fluctuation values, and thus gives forecast results involving two aspects of information. The procedure for forecasting annul maximum water levels with the GMM contains five main steps: 1) establish the GM (1, 1) model based on the data series; 2) estimate the trend values; 3) establish a Markov Model based on relative error series; 4) modify the relative errors caused in step 2, and then obtain the relative errors of the second order estimation; 5) compare the results with measured data and estimate the accuracy. The historical water level records (from 1960 to 1992) at Yuqiao Hydrological Station in the estuary area of the Haihe River near Tianjin, China are utilized to calibrate and verify the proposed model according to the above steps. Every 25 years' data are regarded as a hydro-sequence. Eight groups of simulated results show reasonable agreement between the predicted values and the measured data. The GMM is also applied to the 10 other hydrological stations in the same estuary. The forecast results for all of the hydrological stations are good or acceptable. The feasibility and effectiveness of this new forecasting model have been proved in this paper.

  16. Waste acceptance product specifications for vitrified high-level waste forms

    International Nuclear Information System (INIS)

    Applewhite-Ramsey, A.; Sproull, J.F.

    1993-01-01

    The Nuclear Waste Policy Act of 1982 mandated that all high-level waste (HLW) be sent to a federal geologic repository for permanent disposal. DOE published the Environmental Assessment in 1982 which identified borosilicate glass as the chosen HLW form. 1 In 1985 the Department of Energy instituted a Waste Acceptance Process to assure that DWPF glass waste forms would be acceptable to such a repository. This assurance was important since production of waste forms will precede repository construction and licensing. As part of this Waste Acceptance Process, the DOE Office of Civilian Radioactive Waste Management (RW) formed the Waste Acceptance Committee (WAC). The WAC included representatives from the candidate repository sites, the waste producing sites and DOE. The WAC was responsible for developing the Waste Acceptance Preliminary Specifications (WAPS) which defined the requirements the waste forms must meet to be compatible with the candidate repository geologies

  17. The Relationship between Personality Type and Acceptable Noise Levels: A Pilot Study

    OpenAIRE

    Franklin, Cliff; Johnson, Laura V.; White, Letitia; Franklin, Clay; Smith-Olinde, Laura

    2013-01-01

    Objectives. This study examined the relationship between acceptable noise level (ANL) and personality. ANL is the difference between a person’s most comfortable level for speech and the loudest level of background noise they are willing to accept while listening to speech. Design. Forty young adults with normal hearing participated. ANLs were measured and two personality tests (Big Five Inventory, Myers-Briggs Type Indicator) were administered. Results. The analysis revealed a correlation bet...

  18. The Relationship between Personality Type and Acceptable Noise Levels: A Pilot Study.

    Science.gov (United States)

    Franklin, Cliff; Johnson, Laura V; White, Letitia; Franklin, Clay; Smith-Olinde, Laura

    2013-01-01

    Objectives. This study examined the relationship between acceptable noise level (ANL) and personality. ANL is the difference between a person's most comfortable level for speech and the loudest level of background noise they are willing to accept while listening to speech. Design. Forty young adults with normal hearing participated. ANLs were measured and two personality tests (Big Five Inventory, Myers-Briggs Type Indicator) were administered. Results. The analysis revealed a correlation between ANL and the openness and conscientious personality dimensions from the Big Five Inventory; no correlation emerged between ANL and the Myers-Briggs personality types. Conclusions. Lower ANLs are correlated with full-time hearing aid use and the openness personality dimension; higher ANLs are correlated with part-time or hearing aid nonuse and the conscientious personality dimension. Current data suggest that those more open to new experiences may accept more noise and possibly be good hearing aid candidates, while those more conscientious may accept less noise and reject hearing aids, based on their unwillingness to accept background noise. Knowing something about a person's personality type may help audiologists determine if their patients will likely be good candidates for hearing aids.

  19. An investigation of the maximum penetration level of a photovoltaic (PV) system into a traditional distribution grid

    Science.gov (United States)

    Chalise, Santosh

    Although solar photovoltaic (PV) systems have remained the fastest growing renewable power generating technology, variability as well as uncertainty in the output of PV plants is a significant issue. This rapid increase in PV grid-connected generation presents not only progress in clean energy but also challenges in integration with traditional electric power grids which were designed for transmission and distribution of power from central stations. Unlike conventional electric generators, PV panels do not have rotating parts and thus have no inertia. This potentially causes a problem when the solar irradiance incident upon a PV plant changes suddenly, for example, when scattered clouds pass quickly overhead. The output power of the PV plant may fluctuate nearly as rapidly as the incident irradiance. These rapid power output fluctuations may then cause voltage fluctuations, frequency fluctuations, and power quality issues. These power quality issues are more severe with increasing PV plant power output. This limits the maximum power output allowed from interconnected PV plants. Voltage regulation of a distribution system, a focus of this research, is a prime limiting factor in PV penetration levels. The IEEE 13-node test feeder, modeled and tested in the MATLAB/Simulink environment, was used as an example distribution feeder to analyze the maximum acceptable penetration of a PV plant. The effect of the PV plant's location was investigated, along with the addition of a VAR compensating device (a D-STATCOM in this case). The results were used to develop simple guidelines for determining an initial estimate of the maximum PV penetration level on a distribution feeder. For example, when no compensating devices are added to the system, a higher level of PV penetration is generally achieved by installing the PV plant close to the substation. The opposite is true when a VAR compensator is installed with the PV plant. In these cases, PV penetration levels over 50% may be

  20. Maximum acceptable weight of lift reflects peak lumbosacral extension moments in a functional capacity evaluation test using free style, stoop and squat lifting.

    Science.gov (United States)

    Kuijer, P P F M; van Oostrom, S H; Duijzer, K; van Dieën, J H

    2012-01-01

    It is unclear whether the maximum acceptable weight of lift (MAWL), a common psychophysical method, reflects joint kinetics when different lifting techniques are employed. In a within-participants study (n = 12), participants performed three lifting techniques--free style, stoop and squat lifting from knee to waist level--using the same dynamic functional capacity evaluation lifting test to assess MAWL and to calculate low back and knee kinetics. We assessed which knee and back kinetic parameters increased with the load mass lifted, and whether the magnitudes of the kinetic parameters were consistent across techniques when lifting MAWL. MAWL was significantly different between techniques (p = 0.03). The peak lumbosacral extension moment met both criteria: it had the highest association with the load masses lifted (r > 0.9) and was most consistent between the three techniques when lifting MAWL (ICC = 0.87). In conclusion, MAWL reflects the lumbosacral extension moment across free style, stoop and squat lifting in healthy young males, but the relation between the load mass lifted and lumbosacral extension moment is different between techniques. Tests of maximum acceptable weight of lift (MAWL) from knee to waist height are used to assess work capacity of individuals with low-back disorders. This article shows that the MAWL reflects the lumbosacral extension moment across free style, stoop and squat lifting in healthy young males, but the relation between the load mass lifted and lumbosacral extension moment is different between techniques. This suggests that standardisation of lifting technique used in tests of the MAWL would be indicated if the aim is to assess the capacity of the low back.

  1. Does the acceptable noise level (ANL) predict hearing-aid use?

    DEFF Research Database (Denmark)

    Olsen, Steen Østergaard; Brännström, K Jonas

    2014-01-01

    OBJECTIVE: It has been suggested that individuals have an inherent acceptance of noise in the presence of speech, and that different acceptance of noise results in different hearing-aid (HA) use. The acceptable noise level (ANL) has been proposed for measurement of this property. It has been...... claimed that the ANL magnitude can predict hearing-aid use patterns. Many papers have been published reporting on different aspects of ANL, but none have challenged the predictive power of ANL. The purpose of this study was to discuss whether ANL can predict HA use and how more reliable ANL results can...... reviewed journals as well as a number of papers from trade journals, posters and oral presentations from audiology conventions. CONCLUSIONS: An inherent acceptance of noise in the presence of speech may exist, but no method for precise measurement of ANL is available. The ANL model for prediction of HA use...

  2. [Estimation of maximum acceptable concentration of lead and cadmium in plants and their medicinal preparations].

    Science.gov (United States)

    Zitkevicius, Virgilijus; Savickiene, Nijole; Abdrachmanovas, Olegas; Ryselis, Stanislovas; Masteiková, Rūta; Chalupova, Zuzana; Dagilyte, Audrone; Baranauskas, Algirdas

    2003-01-01

    Heavy metals (lead, cadmium) are possible dashes which quantity is defined by the limiting acceptable contents. Different drugs preparations: infusions, decoctions, tinctures, extracts, etc. are produced using medicinal plants. The objective of this research was to study the impurities of heavy metals (lead, cadmium) in medicinal plants and some drug preparations. We investigated liquid extracts of fruits Crataegus monogyna Jacq. and herbs of Echinacea purpurea Moench., tinctures--of herbs Leonurus cardiaca L. The raw materials were imported from Poland. Investigations were carried out in cooperation with the Laboratory of Antropogenic Factors of the Institute for Biomedical Research. Amounts of lead and cadmium were established after "dry" mineralisation using "Perkin-Elmer Zeeman/3030" model electrothermic atomic absorption spectrophotometer (ETG AAS/Zeeman). It was established that lead is absorbed most efficiently after estimation of absorption capacity of cellular fibers. About 10.73% of lead crosses tinctures and extracts, better cadmium--49.63%. Herbs of Leonurus cardiaca L. are the best in holding back lead and cadmium. About 14.5% of lead and cadmium crosses the tincture of herbs Leonurus cardiaca L. We estimated the factors of heavy metals (lead, cadmium) in the liquid extracts of Crataegus monogyna Jacq. and Echinacea purpurea Moench., tincture of Leonurus cardiaca L. after investigations of heavy metals (lead, cadmium) in drugs and preparations of it. The amounts of heavy metals (lead, cadmium) don't exceed the allowable norms in fruits of Crataegus monogyna Jacq., herbs of Leonurus cardiaca L. and Echinacea purpurea Moench. after estimation of lead and cadmium extraction factors, the maximum of acceptable daily intake and the quantity of drugs consumption in day.

  3. Acceptance and Avoidance Processes at Different Levels of Psychological Recovery from Enduring Mental Illness.

    Science.gov (United States)

    Siqueira, Vinicius R; Oades, Lindsay G

    2015-01-01

    Objective. This study examined the use of psychological acceptance and experiential avoidance, two key concepts of Acceptance and Commitment Therapy (ACT), in the psychological recovery process of people with enduring mental illness. Method. Sixty-seven participants were recruited from the metropolitan, regional, and rural areas of New South Wales, Australia. They all presented some form of chronic mental illness (at least 12 months) as reflected in DSM-IV Axis I diagnostic criteria. The Acceptance and Action Questionnaire (AAQ-19) was used to measure the presence of psychological acceptance and experiential avoidance; the Recovery Assessment Scale (RAS) was used to examine the levels of psychological recovery; and the Scales of Psychological Well-Being was used to observe if there are benefits in utilizing psychological acceptance and experiential avoidance in the recovery process. Results. An analysis of objectively quantifiable measures found no clear correlation between the use of psychological acceptance and recovery in mental illness as measured by the RAS. The data, however, showed a relationship between psychological acceptance and some components of recovery, thereby demonstrating its possible value in the recovery process. Conclusion. The major contribution of this research was the emerging correlation that was observed between psychological acceptance and positive levels of psychological well-being among individuals with mental illness.

  4. Acceptable contamination levels in solar grade silicon: From feedstock to solar cell

    International Nuclear Information System (INIS)

    Hofstetter, J.; Lelievre, J.F.; Canizo, C.; Luque, A. del

    2009-01-01

    Ultimately, alternative ways of silicon purification for photovoltaic applications are developed and applied. There is an ongoing debate about what are the acceptable contamination levels within the purified silicon feedstock to specify the material as solar grade silicon. Applying a simple model and making some additional assumptions, we calculate the acceptable contamination levels of different characteristic impurities for each fabrication step of a typical industrial mc-Si solar cell. The acceptable impurity concentrations within the finished solar cell are calculated for SRH recombination exclusively and under low injection conditions. It is assumed that during solar cell fabrication impurity concentrations are only altered by a gettering step. During the crystallization process, impurity segregation at the solid-liquid interface and at extended defects are taken into account. Finally, the initial contamination levels allowed within the feedstock are deduced. The acceptable concentration of iron in the finished solar cell is determined to be 9.7x10 -3 ppma whereas the concentration in the silicon feedstock can be as high as 12.5 ppma. In comparison, the titanium concentration admitted in the solar cell is calculated to be 2.7x10 -4 ppma and the allowed concentration of 2.2x10 -2 ppma in the feedstock is only two orders of magnitude higher. Finally, it is shown theoretically and experimentally that slow cooling rates can lead to a decrease of the interstitial Fe concentration and thus relax the purity requirements in the feedstock.

  5. Acceptable noise level with Danish, Swedish, and non-semantic speech materials

    DEFF Research Database (Denmark)

    Brännström, K Jonas; Lantz, Johannes; Nielsen, Lars Holme

    2012-01-01

    reported results from American studies. Generally, significant differences were seen between test conditions using different types of noise within ears in each population. Significant differences were seen for ANL across populations, also when the non-semantic ISTS was used as speech signal. Conclusions......Abstract Objective: Acceptable noise level (ANL) has been established as a method to quantify the acceptance of background noise while listening to speech presented at the most comfortable level. The aim of the present study was to generate Danish, Swedish, and a non-semantic version of the ANL...... test and investigate normal-hearing Danish and Swedish subjects' performance on these tests. Design: ANL was measured using Danish and Swedish running speech with two different noises: Speech-weighted amplitude-modulated noise, and multitalker speech babble. ANL was also measured using the non...

  6. Advantages of binaural amplification to acceptable noise level of directional hearing aid users.

    Science.gov (United States)

    Kim, Ja-Hee; Lee, Jae Hee; Lee, Ho-Ki

    2014-06-01

    The goal of the present study was to examine whether Acceptable Noise Levels (ANLs) would be lower (greater acceptance of noise) in binaural listening than in monaural listening condition and also whether meaningfulness of background speech noise would affect ANLs for directional microphone hearing aid users. In addition, any relationships between the individual binaural benefits on ANLs and the individuals' demographic information were investigated. Fourteen hearing aid users (mean age, 64 years) participated for experimental testing. For the ANL calculation, listeners' most comfortable listening levels and background noise level were measured. Using Korean ANL material, ANLs of all participants were evaluated under monaural and binaural amplification with a counterbalanced order. The ANLs were also compared across five types of competing speech noises, consisting of 1- through 8-talker background speech maskers. Seven young normal-hearing listeners (mean age, 27 years) participated for the same measurements as a pilot testing. The results demonstrated that directional hearing aid users accepted more noise (lower ANLs) with binaural amplification than with monaural amplification, regardless of the type of competing speech. When the background speech noise became more meaningful, hearing-impaired listeners accepted less amount of noise (higher ANLs), revealing that ANL is dependent on the intelligibility of the competing speech. The individuals' binaural advantages in ANLs were significantly greater for the listeners with longer experience of hearing aids, yet not related to their age or hearing thresholds. Binaural directional microphone processing allowed hearing aid users to accept a greater amount of background noise, which may in turn improve listeners' hearing aid success. Informational masking substantially influenced background noise acceptance. Given a significant association between ANLs and duration of hearing aid usage, ANL measurement can be useful for

  7. 25(OHD3 Levels Relative to Muscle Strength and Maximum Oxygen Uptake in Athletes

    Directory of Open Access Journals (Sweden)

    Książek Anna

    2016-04-01

    Full Text Available Vitamin D is mainly known for its effects on the bone and calcium metabolism. The discovery of Vitamin D receptors in many extraskeletal cells suggests that it may also play a significant role in other organs and systems. The aim of our study was to assess the relationship between 25(OHD3 levels, lower limb isokinetic strength and maximum oxygen uptake in well-trained professional football players. We enrolled 43 Polish premier league soccer players. The mean age was 22.7±5.3 years. Our study showed decreased serum 25(OHD3 levels in 74.4% of the professional players. The results also demonstrated a lack of statistically significant correlation between 25(OHD3 levels and lower limb muscle strength with the exception of peak torque of the left knee extensors at an angular velocity of 150°/s (r=0.41. No significant correlations were found between hand grip strength and maximum oxygen uptake. Based on our study we concluded that in well-trained professional soccer players, there was no correlation between serum levels of 25(OHD3 and muscle strength or maximum oxygen uptake.

  8. The Influence of Red Fruit Oil on Creatin Kinase Level at Maximum Physical Activity

    Science.gov (United States)

    Apollo Sinaga, Fajar; Hotliber Purba, Pangondian

    2018-03-01

    Heavy physical activities can cause the oxidative stress which resulting in muscle damage with an indicator of elevated levels of Creatin Kinase (CK) enzyme. The oxidative stress can be prevented or reduced by antioxidant supplementation. One of natural resources which contain antioxidant is Red Fruit (Pandanus conoideus) Oil (RFO). This study aims to see the effect of Red Fruit Oil on Creatin Kinase (CK) level at maximum physical activity. This study is an experimental research by using the design of randomized control group pretest-posttest. This study was using 24 male mice divided into four groups, the control group was given aquadest, the treatment groups P1, P2, and P3 were given the RFO orally of 0.15 ml/kgBW, 0.3 ml/kgBW, and 0.6 ml/kgBW, respectively, for a month. The level of CK was checked for all groups at the beginning of study and after the maximum physical activity. The obtained data were then tested statistically by using t-test and ANOVA. The result shows the RFO supplementation during exercise decreased the CK level in P1, P2, and P3 groups with p<0.05, and the higher RFO dosage resulted in decreased CK level at p<0.05. The conclusion of this study is the Red Fruit Oil could decrease the level of CK at maximum physical activity.

  9. WRAP low level waste (LLW) glovebox acceptance test report

    International Nuclear Information System (INIS)

    Leist, K.J.

    1998-01-01

    In June 28, 1997, the Low Level Waste (LLW) glovebox was tested using glovebox acceptance test procedure 13031A-85. The primary focus of the glovebox acceptance test was to examine control system interlocks, display menus, alarms, and operator messages. Limited mechanical testing involving the drum ports, hoists, drum lifter, compacted drum lifter, drum tipper, transfer car, conveyors, lidder/delidder device and the supercompactor were also conducted. As of November 24, 1997, 2 of the 131 test exceptions that affect the LLW glovebox remain open. These items will be tracked and closed via the WRAP Master Test Exception Database. As part of Test Exception resolution/closure the responsible individual closing the Test Exception performs a retest of the affected item(s) to ensure the identified deficiency is corrected, and, or to test items not previously available to support testing. Test Exceptions are provided as appendices to this report

  10. WRAP low level waste (LLW) glovebox acceptance test report

    Energy Technology Data Exchange (ETDEWEB)

    Leist, K.J.

    1998-02-17

    In June 28, 1997, the Low Level Waste (LLW) glovebox was tested using glovebox acceptance test procedure 13031A-85. The primary focus of the glovebox acceptance test was to examine control system interlocks, display menus, alarms, and operator messages. Limited mechanical testing involving the drum ports, hoists, drum lifter, compacted drum lifter, drum tipper, transfer car, conveyors, lidder/delidder device and the supercompactor were also conducted. As of November 24, 1997, 2 of the 131 test exceptions that affect the LLW glovebox remain open. These items will be tracked and closed via the WRAP Master Test Exception Database. As part of Test Exception resolution/closure the responsible individual closing the Test Exception performs a retest of the affected item(s) to ensure the identified deficiency is corrected, and, or to test items not previously available to support testing. Test Exceptions are provided as appendices to this report.

  11. Idaho CERCLA Disposal Facility Complex Waste Acceptance Criteria

    Energy Technology Data Exchange (ETDEWEB)

    W. Mahlon Heileson

    2006-10-01

    The Idaho Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Disposal Facility (ICDF) has been designed to accept CERCLA waste generated within the Idaho National Laboratory. Hazardous, mixed, low-level, and Toxic Substance Control Act waste will be accepted for disposal at the ICDF. The purpose of this document is to provide criteria for the quantities of radioactive and/or hazardous constituents allowable in waste streams designated for disposal at ICDF. This ICDF Complex Waste Acceptance Criteria is divided into four section: (1) ICDF Complex; (2) Landfill; (3) Evaporation Pond: and (4) Staging, Storage, Sizing, and Treatment Facility (SSSTF). The ICDF Complex section contains the compliance details, which are the same for all areas of the ICDF. Corresponding sections contain details specific to the landfill, evaporation pond, and the SSSTF. This document specifies chemical and radiological constituent acceptance criteria for waste that will be disposed of at ICDF. Compliance with the requirements of this document ensures protection of human health and the environment, including the Snake River Plain Aquifer. Waste placed in the ICDF landfill and evaporation pond must not cause groundwater in the Snake River Plain Aquifer to exceed maximum contaminant levels, a hazard index of 1, or 10-4 cumulative risk levels. The defined waste acceptance criteria concentrations are compared to the design inventory concentrations. The purpose of this comparison is to show that there is an acceptable uncertainty margin based on the actual constituent concentrations anticipated for disposal at the ICDF. Implementation of this Waste Acceptance Criteria document will ensure compliance with the Final Report of Decision for the Idaho Nuclear Technology and Engineering Center, Operable Unit 3-13. For waste to be received, it must meet the waste acceptance criteria for the specific disposal/treatment unit (on-Site or off-Site) for which it is destined.

  12. Technology, socio-political acceptance, and the low-level radioactive waste disposal facility

    International Nuclear Information System (INIS)

    Andrews, L.J.; Domenech, J.S.

    1986-01-01

    The technology which is required to develop and operate low-level radioactive waste disposal sites in the 1990's is available today. The push for best available technology is a response to the political difficulties in securing public acceptance of the site selection process. Advances in waste management technologies include development of High Integrity Containers (HIC), solidification media, liquid volume reduction techniques using GEODE/sub sm/ and DeVoe-Holbein technology of selective removal of target radioisotopes, and CASTOR V storage casks. Advances in technology alone, however, do not make the site selection process easier and without socio-political acceptance there may be no process at all. Chem-Nuclear has been successful in achieving community acceptance at the Barnwell facility and elsewhere. For example, last June in Fall River County, South Dakota, citizens voted almost 2:1 to support the development of a low-level radioactive waste disposal facility. In Edgemont, the city nearest the proposed site, 85% of the voters were in favor of the proposed facility

  13. An Iterative Maximum a Posteriori Estimation of Proficiency Level to Detect Multiple Local Likelihood Maxima

    Science.gov (United States)

    Magis, David; Raiche, Gilles

    2010-01-01

    In this article the authors focus on the issue of the nonuniqueness of the maximum likelihood (ML) estimator of proficiency level in item response theory (with special attention to logistic models). The usual maximum a posteriori (MAP) method offers a good alternative within that framework; however, this article highlights some drawbacks of its…

  14. Multi-level restricted maximum likelihood covariance estimation and kriging for large non-gridded spatial datasets

    KAUST Repository

    Castrillon, Julio; Genton, Marc G.; Yokota, Rio

    2015-01-01

    We develop a multi-level restricted Gaussian maximum likelihood method for estimating the covariance function parameters and computing the best unbiased predictor. Our approach produces a new set of multi-level contrasts where the deterministic

  15. Maximum Acceptance Detector for the Fermilab Collider (MAX)

    International Nuclear Information System (INIS)

    Bjorken, James

    2003-01-01

    The authors propose a detector for the Collider which will cover the largest possible ranges of angles with electromagnetic calorimetry and charged tracking, and with hadronic calorimetry for the forward direction. The goal for the complete detector would be acceptance down to approx 1 mrad, in contrast to CDF and D0, which have coverage only to approx. 40 mrad. Because of the limitations of physical space and running time in all but B0 and D0, such a detector will have to be very compact and compatible with a variety of difficult boundary conditions. For this reason, they propose to run a test program at F0 during the second of the present Collider running period, utilizing existing calorimeters and tracking systems. A less desirable option which can be installed at E0 is also described. With luck there may be the possibility of physics from the test program as well. The final version of the detector would be installed at E0 after the main Injector upgrade. the detector is designed to study processes with relatively large cross sections. The running time requirements are thus minimal and data taking would require running a small fraction of the time with the electrostatic separators turned off

  16. Determining Changes in Electromyography Indices when Measuring Maximum Acceptable Weight of Lift in Iranian Male Students.

    Science.gov (United States)

    Salehi Sahl Abadi, A; Mazloumi, A; Nasl Saraji, G; Zeraati, H; Hadian, M R; Jafari, A H

    2018-03-01

    In spite of the increasing degree of automation in industry, manual material handling (MMH) is still performed in many occupational settings. The aim of the current study was to determine the maximum acceptable weight of lift using psychophysical and electromyography indices. This experimental study was conducted among 15 male students recruited from Tehran University of Medical Sciences. Each participant performed 18 different lifting tasks which involved three lifting frequencies, three lifting heights and two box sizes. Each set of experiments was conducted during the 20 min work period using free-style lifting technique and subjective as well as objective assessment methodologies. SPSS version 18 software was used for descriptive and analytical analyses by Friedman, Wilcoxon and Spearman correlation techniques. The results demonstrated that muscle activity increased with increasing frequency, height of lift and box size (P<0.05). Meanwhile, MAWLs obtained in this study are lower than those in Snook table (P<0.05). In this study, the level of muscle activity in percent MVC in relation to the erector spine muscles in L3 and T9 regions as well as left and right abdominal external oblique muscles were at 38.89%, 27.78%, 11.11% and 5.55% in terms of muscle activity is more than 70% MVC, respectively. The results of Wilcoxon test revealed that for both small and large boxes under all conditions, significant differences were detected between the beginning and end of the test values for MPF of erector spine in L3 and T9 regions, and left and right abdominal external oblique muscles (P<0.05). The results of Spearman correlation test showed that there was a significant relation between the MAWL, RMS and MPF of the muscles in all test conditions (P<0.05). Based on the results of this study, it was concluded if muscle activity is more than 70% of MVC, the values of Snook tables should be revisited. Furthermore, the biomechanical perspective should receive special attention

  17. A comparison and cross-reference of commercial low-level radioactive waste acceptance criteria

    International Nuclear Information System (INIS)

    Kerr, T.A.

    1997-04-01

    This document, prepared by the National Low-Level Waste Management Program at the Idaho National Engineering and Environmental Laboratory, is a comparison and cross-reference of commercial low-level radioactive waste acceptance criteria. Many of these are draft or preliminary criteria as well as implemented criteria at operating low-level radioactive waste management facilities. Waste acceptance criteria from the following entities are included: US Nuclear Regulatory Commission, South Carolina, Washington, Utah, Nevada, California, illinois, Texas, North Carolina, Nebraska, Pennsylvania, New York, and the Midwest Compact Region. Criteria in the matrix include the following: physical form, chemical form, liquid limits, void space in packages, concentration averaging, types of packaging, chelating agents, solidification media, stability requirements, sorptive media, gas, oil, biological waste, pyrophorics, source material, special nuclear material, package dimensions, incinerator ash, dewatered resin, transuranics, and mixed waste. Each criterion in the matrix is cross-referenced to its source document so that exact requirements can be determined

  18. Quality assurance requirements and methods for high level waste package acceptability

    International Nuclear Information System (INIS)

    1992-12-01

    This document should serve as guidance for assigning the necessary items to control the conditioning process in such a way that waste packages are produced in compliance with the waste acceptance requirements. It is also provided to promote the exchange of information on quality assurance requirements and on the application of quality assurance methods associated with the production of high level waste packages, to ensure that these waste packages comply with the requirements for transportation, interim storage and waste disposal in deep geological formations. The document is intended to assist both the operators of conditioning facilities and repositories as well as national authorities and regulatory bodies, involved in the licensing of the conditioning of high level radioactive wastes or in the development of deep underground disposal systems. The document recommends the quality assurance requirements and methods which are necessary to generate data for these parameters identified in IAEA-TECDOC-560 on qualitative acceptance criteria, and indicates where and when the control methods can be applied, e.g. in the operation or commissioning of a process or in the development of a waste package design. Emphasis is on the control of the process and little reliance is placed on non-destructive or destructive testing. Qualitative criteria, relevant to disposal of high level waste, are repository dependent and are not addressed here. 37 refs, 3 figs, 2 tabs

  19. Acceptable noise level (ANL) with Danish and non-semantic speech materials in adult hearing-aid users

    DEFF Research Database (Denmark)

    Olsen, Steen Østergaard; Lantz, Johannes; Nielsen, Lars Holme

    2012-01-01

    The acceptable noise level (ANL) test is used for quantification of the amount of background noise subjects accept when listening to speech. This study investigates Danish hearing-aid users' ANL performance using Danish and non-semantic speech signals, the repeatability of ANL, and the association...

  20. Psychophysical basis for maximum pushing and pulling forces: A review and recommendations.

    Science.gov (United States)

    Garg, Arun; Waters, Thomas; Kapellusch, Jay; Karwowski, Waldemar

    2014-03-01

    The objective of this paper was to perform a comprehensive review of psychophysically determined maximum acceptable pushing and pulling forces. Factors affecting pushing and pulling forces are identified and discussed. Recent studies show a significant decrease (compared to previous studies) in maximum acceptable forces for males but not for females when pushing and pulling on a treadmill. A comparison of pushing and pulling forces measured using a high inertia cart with those measured on a treadmill shows that the pushing and pulling forces using high inertia cart are higher for males but are about the same for females. It is concluded that the recommendations of Snook and Ciriello (1991) for pushing and pulling forces are still valid and provide reasonable recommendations for ergonomics practitioners. Regression equations as a function of handle height, frequency of exertion and pushing/pulling distance are provided to estimate maximum initial and sustained forces for pushing and pulling acceptable to 75% male and female workers. At present it is not clear whether pushing or pulling should be favored. Similarly, it is not clear what handle heights would be optimal for pushing and pulling. Epidemiological studies are needed to determine relationships between psychophysically determined maximum acceptable pushing and pulling forces and risk of musculoskeletal injuries, in particular to low back and shoulders.

  1. AWARENESS AND ACCEPTANCE OF TEMPORARY METHODS OF CONTRACEPTIVE AMONG PRIMIPAROUS WOMEN

    Directory of Open Access Journals (Sweden)

    Cicija Kalloopparamban

    2017-04-01

    Full Text Available BACKGROUND Contraceptive advice is a component of good preventive healthcare. Socioeconomic factors, education are a few of factors that play vital role in family planning acceptance. To provide this, understanding the attitude and knowledge of patient towards contraception is very much necessary. Objective of this study is to assess the awareness and acceptance of temporary methods of contraception in postpartum primiparas during their first visit to Family Planning OPD, MCH, Kottayam. MATERIALS AND METHODS A hospital-based prospective descriptive study was conducted among the primiparas presented in Family Planning OPD for the first time in postpartum at 6 wks. in MCH during the study period. Informed written consent was obtained from the patients. The study subjects were interviewed with questionnaire to assess the awareness and acceptance of temporary contraceptive methods and the level to which each of them will keep compliance. The questionnaire was to elicit information regarding age, educational status, occupation, knowledge and source of contraceptive methods, attitude of female towards contraception. RESULTS In our study, majority include graduates (37%, but most of study population were unemployed (43.2%. Literate people are more conscious about their own health and that of their families and try to limit their families much more effectively than the illiterates do. The awareness of the group about contraception was 80.5%, mostly through health workers, 39.6%. 53.9% of the study population had accepted any of the temporary contraceptive methods; maximum opted being the barrier contraception, 19%. 60.9% had peer group support. 74.5% had antenatal counselling from a healthcare worker regarding the use of temporary contraceptive methods. Acceptance was maximum among the graduated subjects, 66.9%.The type accepted by graduates include mostly barrier. Contraceptives, 23.2%. 48% of the graduates used for the need of spacing. A maximum peer

  2. Maximum surface level and temperature histories for Hanford waste tanks

    International Nuclear Information System (INIS)

    Flanagan, B.D.; Ha, N.D.; Huisingh, J.S.

    1994-01-01

    Radioactive defense waste resulting from the chemical processing of spent nuclear fuel has been accumulating at the Hanford Site since 1944. This waste is stored in underground waste-storage tanks. The Hanford Site Tank Farm Facilities Interim Safety Basis (ISB) provides a ready reference to the safety envelope for applicable tank farm facilities and installations. During preparation of the ISB, tank structural integrity concerns were identified as a key element in defining the safety envelope. These concerns, along with several deficiencies in the technical bases associated with the structural integrity issues and the corresponding operational limits/controls specified for conduct of normal tank farm operations are documented in the ISB. Consequently, a plan was initiated to upgrade the safety envelope technical bases by conducting Accelerated Safety Analyses-Phase 1 (ASA-Phase 1) sensitivity studies and additional structural evaluations. The purpose of this report is to facilitate the ASA-Phase 1 studies and future analyses of the single-shell tanks (SSTs) and double-shell tanks (DSTs) by compiling a quantitative summary of some of the past operating conditions the tanks have experienced during their existence. This report documents the available summaries of recorded maximum surface levels and maximum waste temperatures and references other sources for more specific data

  3. The Maximum Resource Bin Packing Problem

    DEFF Research Database (Denmark)

    Boyar, J.; Epstein, L.; Favrholdt, L.M.

    2006-01-01

    Usually, for bin packing problems, we try to minimize the number of bins used or in the case of the dual bin packing problem, maximize the number or total size of accepted items. This paper presents results for the opposite problems, where we would like to maximize the number of bins used...... algorithms, First-Fit-Increasing and First-Fit-Decreasing for the maximum resource variant of classical bin packing. For the on-line variant, we define maximum resource variants of classical and dual bin packing. For dual bin packing, no on-line algorithm is competitive. For classical bin packing, we find...

  4. Measuring Technology Acceptance Level of Turkish Pre-Service English Teachers by Using Technology Acceptance Model

    Science.gov (United States)

    Kirmizi, Özkan

    2014-01-01

    The aim of this study is to investigate technology acceptance of prospective English teachers by using Technology Acceptance Model (TAM) in Turkish context. The study is based on Structural Equation Model (SEM). The participants of the study from English Language Teaching Departments of Hacettepe, Gazi and Baskent Universities. The participants…

  5. Investigation on the acceptance level of radiation exposure. Comparison of Chinese and Japanese

    International Nuclear Information System (INIS)

    Wu, Jin; Katoh, Kazuaki

    1999-01-01

    Radiation has helped to develop our culture and civilization, both of material and of spiritual, and without doubt it is useful to develop our civilization further and to enrich our future life. On the other hand, we cannot help avoiding to live with some by-product radiation of 'advanced civilization' in addition. Thus we must associate with radiation even if we like it or not. To our understanding, safety standard or criteria of safety control is nothing but a contract of the body concerned with the society. In order to make this contract rigorously, it is required for both sides to have adequately enough knowledge and data on the methodology of treating the matter. In such societies, people's acceptable levels to radiation exposure would not be widely distributed. Unification of the wills of the society is absolutely necessary to establish such a contact or develop the philosophy on radiation safety. Hence, we have tried to investigate the acceptable levels of people to radiation exposure. Two kinds of levels, upper limit of the acceptable dose for instantaneous whole body exposure, Lu, and lowest of the dose caring in mind, Ll, were set for inquiry. In this presentation, some results of our survey to both Chinese and Japanese professionals in the fields of science-technology and medical science are reported. Similarly to the previous study by Katoh, in 1989 or so, the distribution of these two levels were very broad and the band widths between the two levels, Lu and Ll, were quite narrow. The former seems reveal the variety of individual's sense of value. Moreover, it was found that, two levels, Lu and Ll, were significantly higher (p<0.05, p<0.005) in Japanese to in Chinese in science/engineering group, while in medical group, the two levels were higher apparently in Japanese than in Chinese, but no statistically significant difference was observed. Moreover, in medical group, Lu and Ll showed higher values than those in science-technology group for the

  6. Evaluation model for safety capacity of chemical industrial park based on acceptable regional risk

    Institute of Scientific and Technical Information of China (English)

    Guohua Chen; Shukun Wang; Xiaoqun Tan

    2015-01-01

    The paper defines the Safety Capacity of Chemical Industrial Park (SCCIP) from the perspective of acceptable regional risk. For the purpose of exploring the evaluation model for the SCCIP, a method based on quantitative risk assessment was adopted for evaluating transport risk and to confirm reasonable safety transport capacity of chemical industrial park, and then by combining with the safety storage capacity, a SCCIP evaluation model was put forward. The SCCIP was decided by the smaller one between the largest safety storage capacity and the maximum safety transport capacity, or else, the regional risk of the park will exceed the acceptable level. The developed method was applied to a chemical industrial park in Guangdong province to obtain the maximum safety transport capacity and the SCCIP. The results can be realized in the regional risk control of the park effectively.

  7. Acceptable noise level (ANL) with Danish and non-semantic speech materials in adult hearing-aid users

    DEFF Research Database (Denmark)

    Olsen, Steen Østergaard; Lantz, Johannes; Nielsen, Lars Holme

    2012-01-01

    The acceptable noise level (ANL) test is used for quantification of the amount of background noise subjects accept when listening to speech. This study investigates Danish hearing-aid users' ANL performance using Danish and non-semantic speech signals, the repeatability of ANL, and the association...... between ANL and outcome of the international outcome inventory for hearing aids (IOI-HA)....

  8. A qualitative study on acceptable levels of risk for pregnant women in clinical research.

    Science.gov (United States)

    van der Zande, Indira S E; van der Graaf, Rieke; Oudijk, Martijn A; van Delden, Johannes J M

    2017-05-15

    There is ambiguity with regard to what counts as an acceptable level of risk in clinical research in pregnant women and there is no input from stakeholders relative to such research risks. The aim of our paper was to explore what stakeholders who are actively involved in the conduct of clinical research in pregnant women deem an acceptable level of risk for pregnant women in clinical research. Accordingly, we used the APOSTEL VI study, a low-risk obstetrical randomised controlled trial, as a case-study. We conducted a prospective qualitative study using 35 in-depth semi-structured interviews and one focus group. We interviewed healthcare professionals, Research Ethics Committee members (RECs) and regulators who are actively involved in the conduct of clinical research in pregnant women, in addition to pregnant women recruited for the APOSTEL VI case-study in the Netherlands. Three themes characterise the way stakeholders view risks in clinical research in pregnant women in general. Additionally, one theme characterises the way healthcare professionals and pregnant women view risks with respect to the case-study specifically. First, ideas on what constitutes an acceptable level of risk in general ranged from a preference for zero risk for the foetus up to minimal risk. Second, the desirability of clinical research in pregnant women in general was questioned altogether. Third, stakeholders proposed to establish an upper limit of risk in potentially beneficial clinical research in pregnant women in order to protect the foetus and the pregnant woman from harm. Fourth and finally, the case-study illustrates that healthcare professionals' individual perception of risk may influence recruitment. Healthcare professionals, RECs, regulators and pregnant women are all risk adverse in practice, possibly explaining the continuing underrepresentation of pregnant women in clinical research. Determining the acceptable levels of risk on a universal level alone is insufficient

  9. WRAP low level waste restricted waste management (LLW RWM) glovebox acceptance test report

    International Nuclear Information System (INIS)

    Leist, K.J.

    1997-01-01

    On April 22, 1997, the Low Level Waste Restricted Waste Management (LLW RWM) glovebox was tested using acceptance test procedure 13027A-87. Mr. Robert L. Warmenhoven served as test director, Mr. Kendrick Leist acted as test operator and test witness, and Michael Lane provided miscellaneous software support. The primary focus of the glovebox acceptance test was to examine glovebox control system interlocks, operator Interface Unit (OIU) menus, alarms, and messages. Basic drum port and lift table control sequences were demonstrated. OIU menus, messages, and alarm sequences were examined, with few exceptions noted. Barcode testing was bypassed, due to the lack of installed equipment as well as the switch from basic reliance on fixed bar code readers to the enhanced use of portable bar code readers. Bar code testing was completed during performance of the LLW RWM OTP. Mechanical and control deficiencies were documented as Test Exceptions during performance of this Acceptance Test. These items are attached as Appendix A to this report

  10. Improving International-Level Chess Players' Performance with an Acceptance-Based Protocol: Preliminary Findings

    Science.gov (United States)

    Ruiz, Francisco J.; Luciano, Carmen

    2012-01-01

    This study compared an individual, 4-hr intervention based on acceptance and commitment therapy (ACT) versus a no-contact control condition in improving the performance of international-level chess players. Five participants received the brief ACT protocol, with each matched to another chess player with similar characteristics in the control…

  11. Examining the Moderating Effect of Individual-Level Cultural Values on Users' Acceptance of E-Learning in Developing Countries: A Structural Equation Modeling of an Extended Technology Acceptance Model

    Science.gov (United States)

    Tarhini, Ali; Hone, Kate; Liu, Xiaohui; Tarhini, Takwa

    2017-01-01

    In this study, we examine the effects of individual-level culture on the adoption and acceptance of e-learning tools by students in Lebanon using a theoretical framework based on the Technology Acceptance Model (TAM). To overcome possible limitations of using TAM in developing countries, we extend TAM to include "subjective norms" (SN)…

  12. Maximum Acceleration Recording Circuit

    Science.gov (United States)

    Bozeman, Richard J., Jr.

    1995-01-01

    Coarsely digitized maximum levels recorded in blown fuses. Circuit feeds power to accelerometer and makes nonvolatile record of maximum level to which output of accelerometer rises during measurement interval. In comparison with inertia-type single-preset-trip-point mechanical maximum-acceleration-recording devices, circuit weighs less, occupies less space, and records accelerations within narrower bands of uncertainty. In comparison with prior electronic data-acquisition systems designed for same purpose, circuit simpler, less bulky, consumes less power, costs and analysis of data recorded in magnetic or electronic memory devices. Circuit used, for example, to record accelerations to which commodities subjected during transportation on trucks.

  13. Social Problem-Solving Skills of Children in Terms of Maternal Acceptance-Rejection Levels

    Science.gov (United States)

    Tepeli, Kezban; Yilmaz, Elif

    2013-01-01

    This study was conducted to find an answer to the question of "Do social problem-solving skills of 5-6 years old children differentiate depending on the levels of maternal acceptance rejection?" The participants of the study included 359 5-6 years old children and their mothers. Wally Social Problem-Solving Test and PARQ (Parental…

  14. Maximum power point tracking techniques for wind energy systems using three levels boost converter

    Science.gov (United States)

    Tran, Cuong Hung; Nollet, Frédéric; Essounbouli, Najib; Hamzaoui, Abdelaziz

    2018-05-01

    This paper presents modeling and simulation of three level Boost DC-DC converter in Wind Energy Conversion System (WECS). Three-level Boost converter has significant advantage compared to conventional Boost. A maximum power point tracking (MPPT) method for a variable speed wind turbine using permanent magnet synchronous generator (PMSG) is also presented. Simulation of three-level Boost converter topology with Perturb and Observe algorithm and Fuzzy Logic Control is implemented in MATLAB/SIMULINK. Results of this simulation show that the system with MPPT using fuzzy logic controller has better performance to the Perturb and Observe algorithm: fast response under changing conditions and small oscillation.

  15. [Relationship between the Mandarin acceptable noise level and the personality traits in normal hearing adults].

    Science.gov (United States)

    Wu, Dan; Chen, Jian-yong; Wang, Shuo; Zhang, Man-hua; Chen, Jing; Li, Yu-ling; Zhang, Hua

    2013-03-01

    To evaluate the relationship between the Mandarin acceptable noise level (ANL) and the personality trait for normal-hearing adults. Eighty-five Mandarin speakers, aged from 21 to 27, participated in this study. ANL materials and the Eysenck Personality Questionnaire (EPQ) questionnaire were used to test the acceptable noise level and the personality trait for normal-hearing subjects. SPSS 17.0 was used to analyze the results. ANL were (7.8 ± 2.9) dB in normal hearing participants. The P and N scores in EPQ were significantly correlated with ANL (r = 0.284 and 0.318, P 0.05). Listeners with higher ANL were more likely to be eccentric, hostile, aggressive, and instabe, no ANL differences were found in listeners who were different in introvert-extravert or lying.

  16. An event- and network-level analysis of college students' maximum drinking day.

    Science.gov (United States)

    Meisel, Matthew K; DiBello, Angelo M; Balestrieri, Sara G; Ott, Miles Q; DiGuiseppi, Graham T; Clark, Melissa A; Barnett, Nancy P

    2018-04-01

    Heavy episodic drinking is common among college students and remains a serious public health issue. Previous event-level research among college students has examined behaviors and individual-level characteristics that drive consumption and related consequences but often ignores the social network of people with whom these heavy drinking episodes occur. The main aim of the current study was to investigate the network of social connections between drinkers on their heaviest drinking occasions. Sociocentric network methods were used to collect information from individuals in the first-year class (N=1342) at one university. Past-month drinkers (N=972) reported on the characteristics of their heaviest drinking occasion in the past month and indicated who else among their network connections was present during this occasion. Average max drinking day indegree, or the total number of times a participant was nominated as being present on another students' heaviest drinking occasion, was 2.50 (SD=2.05). Network autocorrelation models indicated that max drinking day indegree (e.g., popularity on heaviest drinking occassions) and peers' number of drinks on their own maximum drinking occasions were significantly associated with participant maximum number of drinks, after controlling for demographic variables, pregaming, and global network indegree (e.g., popularity in the entire first-year class). Being present at other peers' heaviest drinking occasions is associated with greater drinking quantities on one's own heaviest drinking occasion. These findings suggest the potential for interventions that target peer influences within close social networks of drinkers. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. A qualitative study on acceptable levels of risk for pregnant women in clinical research

    NARCIS (Netherlands)

    van der Zande, Indira S. E.; van der Graaf, Rieke; Oudijk, Martijn A.; van Delden, Johannes J. M.

    2017-01-01

    There is ambiguity with regard to what counts as an acceptable level of risk in clinical research in pregnant women and there is no input from stakeholders relative to such research risks. The aim of our paper was to explore what stakeholders who are actively involved in the conduct of clinical

  18. Individual- and community-level determinants of social acceptance of people living with HIV in Kenya: results from a national population-based survey.

    Science.gov (United States)

    Chiao, Chi; Mishra, Vinod; Sambisa, William

    2009-09-01

    Using the 2003 Kenya Demographic and Health Survey, we investigated the influence of individual- and community-level factors on accepting attitudes toward people living with HIV (PLHIV) using three outcomes: (1) willingness to care for an infected household member, (2) willingness to buy vegetables from an infected vendor, and (3) willingness to allow an infected female teacher to continue teaching. In multilevel logistic regression models, we found that individuals who expressed greater acceptance of PLHIV were more likely to be male, older, more educated, high AIDS knowledge, and exposed to mass media. At the community level, differences in accepting attitudes were associated with community AIDS knowledge, community education, and community AIDS experience, but not for region, or place of residence. The findings suggest the important role of community factors in determining social acceptance of PLHIV. Programmatic strategies aimed at increasing these accepting attitudes should consider both individual- and community-level factors.

  19. Modeling canopy-level productivity: is the "big-leaf" simplification acceptable?

    Science.gov (United States)

    Sprintsin, M.; Chen, J. M.

    2009-05-01

    The "big-leaf" approach to calculating the carbon balance of plant canopies assumes that canopy carbon fluxes have the same relative responses to the environment as any single unshaded leaf in the upper canopy. Widely used light use efficiency models are essentially simplified versions of the big-leaf model. Despite its wide acceptance, subsequent developments in the modeling of leaf photosynthesis and measurements of canopy physiology have brought into question the assumptions behind this approach showing that big leaf approximation is inadequate for simulating canopy photosynthesis because of the additional leaf internal control on carbon assimilation and because of the non-linear response of photosynthesis on leaf nitrogen and absorbed light, and changes in leaf microenvironment with canopy depth. To avoid this problem a sunlit/shaded leaf separation approach, within which the vegetation is treated as two big leaves under different illumination conditions, is gradually replacing the "big-leaf" strategy, for applications at local and regional scales. Such separation is now widely accepted as a more accurate and physiologically based approach for modeling canopy photosynthesis. Here we compare both strategies for Gross Primary Production (GPP) modeling using the Boreal Ecosystem Productivity Simulator (BEPS) at local (tower footprint) scale for different land cover types spread over North America: two broadleaf forests (Harvard, Massachusetts and Missouri Ozark, Missouri); two coniferous forests (Howland, Maine and Old Black Spruce, Saskatchewan); Lost Creek shrubland site (Wisconsin) and Mer Bleue petland (Ontario). BEPS calculates carbon fixation by scaling Farquhar's leaf biochemical model up to canopy level with stomatal conductance estimated by a modified version of the Ball-Woodrow-Berry model. The "big-leaf" approach was parameterized using derived leaf level parameters scaled up to canopy level by means of Leaf Area Index. The influence of sunlit

  20. Waste acceptance product specifications for vitrified high-level waste forms

    International Nuclear Information System (INIS)

    Applewhite-Ramsey, A.; Sproull, J.F.

    1994-01-01

    The Department of Energy (DOE) Office of Environmental Restoration and Waste Management (EM) has developed Waste Acceptance Product Specifications (EM-WAPS). The EM-WAPS will be the basis for defining product acceptance criteria compatible with the requirements of the Civilian Radioactive Waste Management System (CRWMS). The relationship between the EM-WAPS and the CRWMS Systems Requirements document (WA-SRD) will be discussed. The impact of the EM-WAPS on the Savannah River Sit (SRS) Defense Waste Processing Facility's (DWPF) Waste Acceptance Program, Waste Qualification Run planning, and startup schedule will also be reported. 14 refs., 2 tabs

  1. Study of waste acceptance criteria for low-level radioactive waste from medical, industrial, and research facilities (Contract research)

    International Nuclear Information System (INIS)

    Koibuchi, Hiroto; Dohi, Terumi; Ishiguro, Hideharu; Hayashi, Masaru; Senda, Masaki

    2008-12-01

    Japan Atomic Energy Agency (JAEA) is supposed to draw up the plan for the disposal program of the very low-level radioactive waste and low-level radioactive waste generated from medical, industrial and research facilities. For instance, there are these facilities in JAEA, universities, private companies, and so on. JAEA has to get to know about the waste and its acceptance of other institutions described above because it is important for us to hold the licenses for the disposal program regarding safety assessment. This report presents the basic data concerning radioactive waste of research institutes etc. except RI waste, domestic and foreign information related to acceptance criteria for disposal of the low-level radioactive waste, the current status of foreign medical waste management, waste acceptance, and such. In this report, Japan's acceptance criteria were summarized on the basis of present regulation. And, the criteria of foreign countries, United States, France, United Kingdom and Spain, were investigated by survey of each reference. In addition, it was reported that the amount of waste from laboratories etc. for near-surface disposal and their characterization in our country. The Subjects of future work: the treatment of hazardous waste, the problem of the double-regulation (the Nuclear Reactor Regulation Law and the Law Concerning Prevention from Radiation Hazards due to Radioisotopes and Others) and the possession of waste were discussed here. (author)

  2. Knowledge, Cause and Level of Acceptance of Interest among Muslims in Balochistan

    OpenAIRE

    Nadeem, Faiza; Zaman, Nadeem Uz; Shah, Syed Raza Irfan

    2015-01-01

    Islam is not just a religion but a life’s complete code – presents economic, social and political systems of its own to guide human in all aspects of life – thus has prohibited interest which is the exploitation to the people and acting like a curse for the whole humanity – due to interest rich is getting richer and poor is getting poorer – affects the borrower and the lender alike. There is no research that throws light on the knowledge, cause and level of acceptance of interest among Muslim...

  3. Suitability of teriparatide and level of acceptance of pharmacotherapeutic recommendations in a healthcare management areaSuitability of teriparatide and level of acceptance of pharmacotherapeutic recommendations in a healthcare management area DOI:\t10.7399/fh.2016.40.4.9953

    Directory of Open Access Journals (Sweden)

    Maria Rosa Cantudo-Cuenca

    2016-07-01

    Full Text Available Objective: To analyse the suitability of teriparatide prescriptions for osteoporosis treatment in a health management area, as well as the level of acceptance of pharmacotherapeutic recommendations made to physicians. Design: A prospective interventional study conducted from february 2015 to june 2015. Setting: South Seville Health Management Area. Participants: Patients receiving teriparatide. Main measurements: Suitability of teriparatide prescriptions according to Clinical Practice Guidelines and level of acceptance of pharmacotherapeutic recommendations. Results: Teriparatide prescriptions were unsuitable in 45 patients (68.2%; 11 due to no indication, 17 patients did not have previous treatments with first-line drugs, 6 due to contraindications and 9 patients were treated for more than 24 months with the drug. Besides, 4 prescriptions were unsuitable because of combination with other therapies. The acceptance of pharmacotherapeutic recommendations was 64.4%, leading to teriparatide discontinuation in 21 patients (72.4%, and a switch to alendronate or ibandronate in another 8 patients. Conclusions: A high percentage of teriparatide prescriptions is unsuitable in our health care management area, but it has decreased after pharmacist intervention.

  4. Integrative assessment of Evolutionary theory acceptance and knowledge levels of Biology undergraduate students from a Brazilian university

    Science.gov (United States)

    Tavares, Gustavo Medina; Bobrowski, Vera Lucia

    2018-03-01

    The integrative role that Evolutionary theory plays within Biology is recognised by most scientific authors, as well as in governmental education policies, including Brazilian policies. However, teaching and learning evolution seems problematic in many countries, and Brazil is among those. Many factors may affect teachers' and students' perceptions towards evolution, and studies can help to reveal those factors. We used a conceptual questionnaire, the Measure of Acceptance of the Theory of Evolution (MATE) instrument, and a Knowledge test to assess (1) the level of acceptance and understanding of 23 undergraduate Biology students nearing the end of their course, (2) other factors that could affect these levels, including course structure, and (3) the most difficult topics regarding evolutionary biology. The results of this study showed that the students, on average, had a 'Very High Acceptance' (89.91) and a 'Very Low Knowledge' (59.42%) of Evolutionary theory, and also indicated a moderate positive correlation between the two (r = 0.66, p = .001). The most difficult topics were related to the definition of evolution and dating techniques. We believe that the present study provides evidence for policymakers to reformulate current school and university curricula in order to improve the teachers' acceptance and understanding of evolution and other biological concepts, consequently, helping students reduce their misconceptions related to evolutionary biology.

  5. Are the noise levels acceptable in a built environment like Hong Kong?

    Science.gov (United States)

    To, Wai Ming; Mak, Cheuk Ming; Chung, Wai Leung

    2015-01-01

    Governments all over the world have enacted environmental noise directives and noise control ordinances/acts to protect tranquility in residential areas. However, there is a lack of literature on the evaluation of whether the Acceptable Noise Levels (ANLs) stipulated in the directive/ordinance/act are actually achievable. The study aimed at measuring outdoor environmental noise levels in Hong Kong and identifying whether the measured noise levels are lower than the stipulated ANLs at 20 categories of residential areas. Data were gathered from a territory-wide noise survey. Outdoor noise measurements were conducted at 203 residential premises in urban areas, low-density residential areas, rural areas, and other areas. In total, 366 daytime hourly Leq outdoor noise levels, 362 nighttime hourly Leq outdoor noise levels, and 20 sets of daily, that is, 24 Leq,1-h outdoor noise levels were recorded. The mean daytime Leq,1-h values ranged 54.4-70.8 dBA, while the mean nighttime Leq,1-h values ranged 52.6-67.9 dBA. When the measured noise levels were compared with the stipulated ANLs, only three out of the 20 categories of areas had outdoor noise levels below ANLs during daytime. All other areas (and all areas during nighttime) were found to have outdoor noise levels at or above ANLs. PMID:26572703

  6. The Relationship between Maternal Acceptance-Rejection Levels and Preschoolers' Social Competence and Emotion Regulation Skills

    Science.gov (United States)

    Bayindir, Dilan; Güven, Gülçin; Sezer, Türker; Aksin-Yavuz, Ezgi; Yilmaz, Elif

    2017-01-01

    The purpose of this research was to examine the relationship between maternal acceptance-rejection levels and preschool children's social competence and emotion regulation skills. The study group of the research, which was designed in survey method, consisted of 303 voluntary mother-child dyad. The participant children were attending a preschool…

  7. Multi-level restricted maximum likelihood covariance estimation and kriging for large non-gridded spatial datasets

    KAUST Repository

    Castrillon, Julio

    2015-11-10

    We develop a multi-level restricted Gaussian maximum likelihood method for estimating the covariance function parameters and computing the best unbiased predictor. Our approach produces a new set of multi-level contrasts where the deterministic parameters of the model are filtered out thus enabling the estimation of the covariance parameters to be decoupled from the deterministic component. Moreover, the multi-level covariance matrix of the contrasts exhibit fast decay that is dependent on the smoothness of the covariance function. Due to the fast decay of the multi-level covariance matrix coefficients only a small set is computed with a level dependent criterion. We demonstrate our approach on problems of up to 512,000 observations with a Matérn covariance function and highly irregular placements of the observations. In addition, these problems are numerically unstable and hard to solve with traditional methods.

  8. Sea-Level Change in the Russian Arctic Since the Last Glacial Maximum

    Science.gov (United States)

    Horton, B.; Baranskaya, A.; Khan, N.; Romanenko, F. A.

    2017-12-01

    Relative sea-level (RSL) databases that span the Last Glacial Maximum (LGM) to present have been used to infer changes in climate, regional ice sheet variations, the rate and geographic source of meltwater influx, and the rheological structure of the solid Earth. Here, we have produced a quality-controlled RSL database for the Russian Arctic since the LGM. The database contains 394 index points, which locate the position of RSL in time and space, and 244 limiting points, which constrain the minimum or maximum limit of former sea level. In the western part of the Russian Arctic (Barents and White seas,) RSL was driven by glacial isostatic adjustment (GIA) due to deglaciation of the Scandinavian ice sheet, which covered the Baltic crystalline shield at the LGM. RSL data from isolation basins show rapid RSL from 80-100 m at 11-12 ka BP to 15-25 m at 4-5 ka BP. In the Arctic Islands of Franz-Joseph Land and Novaya Zemlya, RSL data from dated driftwood in raised beaches show a gradual fall from 25-35 m at 9-10 ka BP to 5-10 m at 3 ka BP. In the Russian plain, situated at the margins of the formerly glaciated Baltic crystalline shield, RSL data from raised beaches and isolation basins show an early Holocene rise from less than -20 m at 9-11 ka BP before falling in the late Holocene, illustrating the complex interplay between ice-equivalent meltwater input and GIA. The Western Siberian Arctic (Yamal and Gydan Peninsulas, Beliy Island and islands of the Kara Sea) was not glaciated at the LGM. Sea-level data from marine and salt-marsh deposits show RSL rise at the beginning of the Holocene to a mid-Holocene highstand of 1-5 m at 5-1 ka BP. A similar, but more complex RSL pattern is shown for Eastern Siberia. RSL data from the Laptev Sea shelf show RSL at -40- -45 m and 11-14 ka BP. RSL data from the Lena Delta and Tiksi region have a highstand from 5 to 1 ka BP. The research is supported by RSF project 17-77-10130

  9. A kidney offer acceptance decision tool to inform the decision to accept an offer or wait for a better kidney.

    Science.gov (United States)

    Wey, Andrew; Salkowski, Nicholas; Kremers, Walter K; Schaffhausen, Cory R; Kasiske, Bertram L; Israni, Ajay K; Snyder, Jon J

    2018-04-01

    We developed a kidney offer acceptance decision tool to predict the probability of graft survival and patient survival for first-time kidney-alone candidates after an offer is accepted or declined, and we characterized the effect of restricting the donor pool with a maximum acceptable kidney donor profile index (KDPI). For accepted offers, Cox proportional hazards models estimated these probabilities using transplanted kidneys. For declined offers, these probabilities were estimated by considering the experience of similar candidates who declined offers and the probability that declining would lead to these outcomes. We randomly selected 5000 declined offers and estimated these probabilities 3 years post-offer had the offers been accepted or declined. Predicted outcomes for declined offers were well calibrated (offers been accepted, the probabilities of graft survival and patient survival were typically higher. However, these advantages attenuated or disappeared with higher KDPI, candidate priority, and local donor supply. Donor pool restrictions were associated with worse 3-year outcomes, especially for candidates with high allocation priority. The kidney offer acceptance decision tool could inform offer acceptance by characterizing the potential risk-benefit trade-off associated with accepting or declining an offer. © 2017 The American Society of Transplantation and the American Society of Transplant Surgeons.

  10. A comparison of individual exposure, perception, and acceptable levels of PM2.5 with air pollution policy objectives in China.

    Science.gov (United States)

    Huang, Lei; Rao, Chao; van der Kuijp, Tsering Jan; Bi, Jun; Liu, Yang

    2017-08-01

    Atmospheric pollution has emerged as a major public health issue in China. Public perception and acceptable risk levels of air pollution can prompt individual behavioral changes and play a major role in the public's response to health risks. Therefore, to explore these responses and evaluate what constitutes publicly acceptable concentrations of fine particulate matter (PM 2.5 ), questionnaire surveys were conducted in three representative cities of China: Beijing, Nanjing, and Guangzhou. Great differences in public risk perception were revealed. Public perception of the health effects of air pollution (Effect) and familiarity with it (Familiarity) were significantly higher in the winter than in the summer, and also during severe haze days compared with typical days. The public perception of trust in the government (Trust) was consistent across all conditions. Exposure to severe haze pollution and experiencing harms from it were key factors influencing public willingness to respond to haze. These results reflected individual exposure levels correlating closely with risk perception and acceptance of PM 2.5 . However, a crucial gap exists between public acceptable risk levels (PARL) of air pollution and the policy objectives of the State Council's Action Plan. Thus, policymakers can utilize this study to develop more targeted measures to combat air pollution. Copyright © 2017 Elsevier Inc. All rights reserved.

  11. An international comparative analysis of public acceptance of nuclear energy

    International Nuclear Information System (INIS)

    Kim, Younghwan; Kim, Wonjoon; Kim, Minki

    2014-01-01

    Across the globe, public acceptance of nuclear power is a crucial factor for governmental establishment of a nuclear energy program. Therefore, it is important to understand the determinants of public acceptance of nuclear power. This study examines the effects of knowledge, trust, risk, and benefit related factors on public acceptance of nuclear power across 19 countries. We consider three levels of public acceptance – strongly accept, reluctantly accept, and oppose – and classify countries into four groups according to the ratio of those three levels of public acceptance. Our results indicate that knowledge of nuclear inspection is more effective than trust in inspection authorities in creating stronger public acceptance among people in the countries with a high level of reluctant acceptance and a low level of strong acceptance, while trust in inspection authorities is more important than knowledge of nuclear inspection for the selection between opposition and reluctant acceptance in countries with a low level of reluctant acceptance and a high level of strong acceptance. Without grouping the countries, we found that trust in inspection authorities is crucial for the decision between opposition and reluctant acceptance. Additionally, the generation of electricity has the most positive effect on public acceptance of nuclear power. - Highlights: • We examine public acceptance (PA) of nuclear power across 19 countries. • Three levels of PA – strongly accept, reluctantly accept, and oppose – are considered. • Knowledge is most effective in creating stronger PA. • Trust is effective in shifting PA from opposition to reluctant acceptance. • Low risk and benefit of electricity generation enhance PA the most

  12. The MCE (Maximum Credible Earthquake) - an approach to reduction of seismic risk

    International Nuclear Information System (INIS)

    Asmis, G.J.K.; Atchison, R.J.

    1979-01-01

    It is the responsibility of the Regulatory Body (in Canada, the AECB) to ensure that radiological risks resulting from the effects of earthquakes on nuclear facilities, do not exceed acceptable levels. In simplified numerical terms this means that the frequency of an unacceptable radiation dose must be kept below 10 -6 per annum. Unfortunately, seismic events fall into the class of external events which are not well defined at these low frequency levels. Thus, design earthquakes have been chosen, at the 10 -3 - 10 -4 frequency level, a level commensurate with the limits of statistical data. There exists, therefore, a need to define an additional level of earthquake. A seismic design explicitly and implicitly recognizes three levels of earthquake loading; one comfortably below yield, one at or about yield, and one at ultimate. The ultimate level earthquake, contrary to the first two, has been implicitly addressed by conscientious designers by choosing systems, materials and details compatible with postulated dynamic forces. It is the purpose of this paper to discuss the regulatory specifications required to quantify this third level, or Maximum Credible Earthquake (MCE). (orig.)

  13. Contribution to the study of maximum levels for liquid radioactive waste disposal into continental and sea water. Treatment of some typical samples

    International Nuclear Information System (INIS)

    Bittel, R.; Mancel, J.

    1968-10-01

    The most important carriers of radioactive contamination of man are the whole of foodstuffs and not only ingested water or inhaled air. That is the reason why, in accordance with the spirit of the recent recommendations of the ICRP, it is proposed to substitute the idea of maximum levels of contamination of water to the MPC. In the case of aquatic food chains (aquatic organisms and irrigated foodstuffs), the knowledge of the ingested quantities and of the concentration factors food/water permit to determinate these maximum levels, or to find out a linear relation between the maximum levels in the case of two primary carriers of contamination (continental and sea waters). The notion of critical food-consumption, critical radioelements and formula of waste disposal are considered in the same way, taking care to attach the greatest possible importance to local situations. (authors) [fr

  14. Lake-level increasing under the climate cryoaridization conditions during the Last Glacial Maximum

    Science.gov (United States)

    Amosov, Mikhail; Strelkov, Ivan

    2017-04-01

    A lake genesis and lake-level increasing during the Last Glacial Maximum (LGM) are the paramount issues in paleoclimatology. Investigating these problems reveals the regularities of lake development and figures out an arid territory conditions at the LGM stage. Pluvial theory is the most prevalent conception of lake formation during the LGM. This theory is based on a fact that the water bodies emerged and their level increased due to torrential rainfalls. In this study, it is paid attention to an alternative assumption of lake genesis at the LGM stage, which is called climate cryoaridization. In accordance with this hypothesis, the endorheic water basins had their level enlarged because of a simultaneous climate aridity and temperature decrease. In this research, a lake-level increasing in endorheic regions of Central Asia and South American Altiplano of the Andes is described. The lake investigation is related to its conditions during the LGM. The study also includes a lake catalogue clearly presenting the basin conditions at the LGM stage and nowadays. The data compilation partly consists of information from an earlier work of Mikhail Amosov, Lake-levels, Vegetation And Climate In Central Asia During The Last Glacial Maximum (EGU2014-3015). According to the investigation, a lake catalogue on 27 lakes showed that most of the water bodies had higher level. This feature could be mentioned for the biggest lakes of the Aral Sea, Lake Balkhash, Issyk-Kul etc. and for the small ones located in the mountains, such as Pamir, Tian-Shan and Tibet. Yet some lakes that are situated in Central Asian periphery (Lake Qinghai and lakes in Inner Mongolia) used to be lower than nowadays. Also, the lake-level increasing of Altiplano turned to be a significant feature during the LGM in accordance with the data of 5 lakes, such as Titicaca, Coipasa-Uyuni, Lejia, Miscanti and Santa-Maria. Most of the current endorheic basins at the LGM stage were filled with water due to abundant

  15. A Polio Immunization Pamphlet with Increased Appeal and Simplified Language Does Not Improve Comprehension to an Acceptable Level.

    Science.gov (United States)

    Davis, Terry C.; Fredrickson, Doren D.; Arnold, Connie; Murphy, Peggy W.; Herbst, Melissa; Bocchini, Joseph A.

    1998-01-01

    Two polio-vaccine pamphlets written on a sixth-grade level were compared for readability, comprehension, and preference among a broad range of parents. The easy-to-read version was widely preferred, and comprehension was significantly higher. However, the use of instructional graphics was required to achieve an acceptable level of comprehension.…

  16. Methods for verifying compliance with low-level radioactive waste acceptance criteria

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-09-01

    This report summarizes the methods that are currently employed and those that can be used to verify compliance with low-level radioactive waste (LLW) disposal facility waste acceptance criteria (WAC). This report presents the applicable regulations representing the Federal, State, and site-specific criteria for accepting LLW. Typical LLW generators are summarized, along with descriptions of their waste streams and final waste forms. General procedures and methods used by the LLW generators to verify compliance with the disposal facility WAC are presented. The report was written to provide an understanding of how a regulator could verify compliance with a LLW disposal facility`s WAC. A comprehensive study of the methodology used to verify waste generator compliance with the disposal facility WAC is presented in this report. The study involved compiling the relevant regulations to define the WAC, reviewing regulatory agency inspection programs, and summarizing waste verification technology and equipment. The results of the study indicate that waste generators conduct verification programs that include packaging, classification, characterization, and stabilization elements. The current LLW disposal facilities perform waste verification steps on incoming shipments. A model inspection and verification program, which includes an emphasis on the generator`s waste application documentation of their waste verification program, is recommended. The disposal facility verification procedures primarily involve the use of portable radiological survey instrumentation. The actual verification of generator compliance to the LLW disposal facility WAC is performed through a combination of incoming shipment checks and generator site audits.

  17. Methods for verifying compliance with low-level radioactive waste acceptance criteria

    International Nuclear Information System (INIS)

    1993-09-01

    This report summarizes the methods that are currently employed and those that can be used to verify compliance with low-level radioactive waste (LLW) disposal facility waste acceptance criteria (WAC). This report presents the applicable regulations representing the Federal, State, and site-specific criteria for accepting LLW. Typical LLW generators are summarized, along with descriptions of their waste streams and final waste forms. General procedures and methods used by the LLW generators to verify compliance with the disposal facility WAC are presented. The report was written to provide an understanding of how a regulator could verify compliance with a LLW disposal facility's WAC. A comprehensive study of the methodology used to verify waste generator compliance with the disposal facility WAC is presented in this report. The study involved compiling the relevant regulations to define the WAC, reviewing regulatory agency inspection programs, and summarizing waste verification technology and equipment. The results of the study indicate that waste generators conduct verification programs that include packaging, classification, characterization, and stabilization elements. The current LLW disposal facilities perform waste verification steps on incoming shipments. A model inspection and verification program, which includes an emphasis on the generator's waste application documentation of their waste verification program, is recommended. The disposal facility verification procedures primarily involve the use of portable radiological survey instrumentation. The actual verification of generator compliance to the LLW disposal facility WAC is performed through a combination of incoming shipment checks and generator site audits

  18. Probabilistic relationships in acceptable risk studies

    International Nuclear Information System (INIS)

    Benjamin, J.R.

    1977-01-01

    Acceptable risk studies involve uncertainties in future events; consequences and associated values, the acceptability levels, and the future decision environment. Probabilistic procedures afford the basic analytical tool to study the influence of each of these parameters on the acceptable risk decision, including their interrelationships, and combinations. A series of examples are presented in the paper in increasing complexity to illustrate the principles involved and to quantify the relationships to the acceptable risk decision. The basic objective of such studies is to broaden the scientific basis of acceptable risk decision making. It is shown that rationality and consistency in decision making is facilitated by such studies and that rather simple relationships exist in many situations of interest. The variation in criteria associated with an increase in the state of knowledge or change in the level of acceptability is also discussed. (Auth.)

  19. Probabilistic relationships in acceptable risk studies

    International Nuclear Information System (INIS)

    Benjamin, J.R.

    1977-01-01

    Acceptable risk studies involve uncertainties in future events: consequences and associated values, the acceptability levels, and the future decision environment. Probabilistic procedures afford the basic analytical tool to study the influence of each of these parameters on the acceptable risk decision, including their interrelationships, and combinations. A series of examples are presented in the paper in increasing complexity to illustrate the principles involved and to quantify the relationships to the acceptable risk decision. The basic objective of such studies is to broaden the scientific basis of acceptable risk decision making. It is shown that rationality and consistency in decision making is facilitated by such studies and that rather simple relationships exist in many situations of interest. The variation in criteria associated with an increase in the state of knowledge or change in the level of acceptability is also discussed

  20. Factors Potentially Influencing Student Acceptance of Biological Evolution

    Science.gov (United States)

    Wiles, Jason R.

    This investigation explored scientific, religious, and otherwise nonscientific factors that may influence student acceptance of biological evolution and related concepts, how students perceived these factors to have influenced their levels of acceptance of evolution and changes therein, and what patterns arose among students' articulations of how their levels of acceptance of evolution may have changed. This exploration also measured the extent to which students' levels of acceptance changed following a treatment designed to address factors identified as potentially affecting student acceptance of evolution. Acceptance of evolution was measured using the MATE instrument (Rutledge and Warden, 1999; Rutledge and Sadler, 2007) among participants enrolled in a secondary-level academic program during the summer prior to their final year of high school and as they transitioned to the post-secondary level. Student acceptance of evolution was measured to be significantly higher than pre-treatment levels both immediately following and slightly over one year after treatment. Qualitative data from informal questionnaires, from formal course evaluations, and from semi-structured interviews of students engaged in secondary level education and former students at various stages of post-secondary education confirmed that the suspected factors were perceived by participants to have influenced their levels of acceptance of evolution. Furthermore, participant reports provided insight regarding the relative effects they perceived these factors to have had on their evolution acceptance levels. Additionally, many participants reported that their science teachers in public schools had avoided, omitted, or denigrated evolution during instruction, and several of these students expressed frustration regarding what they perceived to have been a lack of education of an important scientific principle. Finally, no students expressed feelings of being offended by having been taught about

  1. Feeling Safe in the Dark : Examining the Effect of Entrapment, Lighting Levels, and Gender on Feelings of Safety and Lighting Policy Acceptability

    NARCIS (Netherlands)

    Boomsma, Christine; Steg, LInda

    This research examined to what extent physical factors, notably lighting and entrapment (blocked escape), and individual factors, notably gender, affect feelings of safety and the acceptability of reduced lighting levels. The authors reasoned that acceptability of reduced street lighting depends on

  2. An evaluation of the exemption level for the radiation protection regulation based on the social risk acceptance in Korea

    International Nuclear Information System (INIS)

    Yoon, Ki Don

    1998-02-01

    Radiation protection is based not only on the science but also on the political, social, economical and emotional factors, so a policy decision for a factor like the exemption level in this field must be considered social expectation and valuation as well as scientific evaluation. In this paper, an attempt was made to get a rationale on the exemption level, which has a significant meaning in radiation protection, by means of surveying the social risk acceptance in Korea. Risk perception data were collected by mail surveys to the respondents randomly selected in the city of Seoul. A poor response rate, 156 out of 400, was observed. The result showed that the majority of the respondents agreed upon setting a de mini mis level of risk and the favoured de mini mis level appeared to be in the range of 10 -6 yr -1 to 10 -7 yr -1 , which is consistent with the level suggested by other organizations: ICRP, EPA and NRPB. Approximately the same risk level, unfortunately, was obtained for the risk limits against a harmful agent, which makes no sense. It can be attributed to mis-communication due to the questionnaires inadequately designed. The acceptable risk level for a single practice was selected to be 1/100 or less of the risk limits, which seemed overly conservative, but could be understood in the light of the public attitude of outrage. There seems to be tendency that the public recognize the risk significant if it is not de mini mis. This study should not be regarded as one giving a satisfactory conclusion but a preliminary attempt to evaluate the acceptable risk level. More endeavors in design of questionnaires are needed to communicate successfully with the members of the public

  3. Maximum Acceptable Vibrato Excursion as a Function of Vibrato Rate in Musicians and Non-musicians

    DEFF Research Database (Denmark)

    Vatti, Marianna; Santurette, Sébastien; Pontoppidan, Niels H.

    2014-01-01

    and, in most listeners, exhibited a peak at medium vibrato rates (5–7 Hz). Large across-subject variability was observed, and no significant effect of musical experience was found. Overall, most listeners were not solely sensitive to the vibrato excursion and there was a listener-dependent rate...... for which larger vibrato excursions were favored. The observed interaction between maximum excursion thresholds and vibrato rate may be due to the listeners’ judgments relying on cues provided by the rate of frequency changes (RFC) rather than excursion per se. Further studies are needed to evaluate......Human vibrato is mainly characterized by two parameters: vibrato extent and vibrato rate. These parameters have been found to exhibit an interaction both in physical recordings of singers’ voices and in listener’s preference ratings. This study was concerned with the way in which the maximum...

  4. Dose assessment around TR-2 reactor due to maximum credible accident

    International Nuclear Information System (INIS)

    Turgut, M. H.; Adalioglu, U.; Aytekin, A.

    2001-01-01

    The revision of safety analysis report of TR-2 research reactor had been initiated in 1995. The whole accident analysis and accepted scenario for maximum credible accident has been revised according to the new safety concepts and the impact to be given to the environment due to this scenario has been assessed. This paper comprises all results of these calculations. The accepted maximum credible accident scenario is the partial blockage of the whole reactor core which resulted in the release of 25% of the core inventory. The DOSER code which uses very conservative modelling of atmospheric distributions were modified for the assessment calculations. Pasquill conditions based on the local weather observations, topography, and building affects were considered. The thyroid and whole body doses for 16 sectors and up to 10 km of distance around CNAEM were obtained. Release models were puff and a prolonged one of two hours of duration. Release fractions for the active isotopes were chosen from literature which were realistic

  5. Social acceptance process model for ensuring the high-level radioactive waste disposal site

    International Nuclear Information System (INIS)

    Wada, Ryutaro; Tanaka, Satoru; Nagasaki, Shinya

    2009-01-01

    Generally speaking, a vast, advanced and unfamiliar science and technology are unacceptable to the public for fear of their unknown nature. Here, the social acceptance process model was examined on the basis of the analysis of the cause phenomenon and numerical grounds, by referring to the problems on the application of literature documentation for location examination of a high-level radioactive waste disposal site in Toyo town in Kochi Pref. in April 2007. In analyzing the Toyo town case, we have found a possibility that the majority of local residents knew very little about the object opposed by the fringe route processing. To ensure a healthy decision making by the public, it is vital to convey fundamental information using sufficient wide-area PR media before the issue becomes actual. After the issue becomes actual, dialog with residents through a careful technology assessment is indispensable. The authors focus attention on the decision-making process of human beings from the social and psychological viewpoints, and point out that it is desirable for promoting social acceptance by adopting two approaches: a direct approach aiming at better intelligibility for the different resident layers and a deductive approach in technological essence. (author)

  6. Appropriate threshold levels of cardiac beat-to-beat variation in semi-automatic analysis of equine ECG recordings

    DEFF Research Database (Denmark)

    Madsen, Mette Flethøj; Kanters, Jørgen K.; Pedersen, Philip Juul

    2016-01-01

    considerably with heart rate (HR), and an adaptable model consisting of three different HR ranges with separate threshold levels of maximum acceptable RR deviation was consequently defined. For resting HRs

  7. Physiologic correlates to background noise acceptance

    Science.gov (United States)

    Tampas, Joanna; Harkrider, Ashley; Nabelek, Anna

    2004-05-01

    Acceptance of background noise can be evaluated by having listeners indicate the highest background noise level (BNL) they are willing to accept while following the words of a story presented at their most comfortable listening level (MCL). The difference between the selected MCL and BNL is termed the acceptable noise level (ANL). One of the consistent findings in previous studies of ANL is large intersubject variability in acceptance of background noise. This variability is not related to age, gender, hearing sensitivity, personality, type of background noise, or speech perception in noise performance. The purpose of the current experiment was to determine if individual differences in physiological activity measured from the peripheral and central auditory systems of young female adults with normal hearing can account for the variability observed in ANL. Correlations between ANL and various physiological responses, including spontaneous, click-evoked, and distortion-product otoacoustic emissions, auditory brainstem and middle latency evoked potentials, and electroencephalography will be presented. Results may increase understanding of the regions of the auditory system that contribute to individual noise acceptance.

  8. Optimization of the general acceptability though affective tests and response surface methodology of a dry cacao powder mixture based beverage

    Directory of Open Access Journals (Sweden)

    Elena Chau Loo Kung

    2013-09-01

    Full Text Available This research work had as main objective optimizing the general acceptability though affective tests and response surface methodology of a dry cacao powder mixture based beverage. We obtained formulations of mixtures of cacao powder with different concentrations of 15%, 17.5% and 20%, as well as lecithin concentrations of 0.1%; 0.3%; and 0.5% maintaining a constant content of sugar (25 %, Vanillin (1% that included cacao powder with different pH values: natural (pH 5 and alkalinized (pH 6.5 and pH 8 and water by difference to 100%, generating a total of fifteen treatments to be evaluated, according to the Box-Behnen design for three factors. The treatments underwent satisfaction level tests to establish the general acceptability. The treatment that included cacao powder with a concentration of 17.5 %, pH 6.5 and lecithin concentration of 0.3 % obtained the best levels of acceptability. The software Statgraphics Plus 5.1 was used to obtain the treatment with maximum acceptability that corresponded to cacao powder with pH 6.81, with a concentration of 18.24 % and soy lecithin in 0.28% with a tendency to what was obtained in the satisfaction levels tests. Finally we characterized in a physical-chemistry and microbiological way the optimum formulation as well as evaluated sensitively obtaining an acceptability of 6.17.

  9. The effect of extending high-frequency bandwidth on the acceptable noise level (ANL) of hearing-impaired listeners.

    Science.gov (United States)

    Johnson, Earl; Ricketts, Todd; Hornsby, Benjamin

    2009-01-01

    This study examined the effects of extending high-frequency bandwidth, for both a speech signal and a background noise, on the acceptable signal-to-noise ratio (SNR) of listeners with mild sensorineural hearing loss through utilization of the Acceptable Noise Level (ANL) procedure. In addition to extending high-frequency bandwidth, the effects of reverberation time and background noise type and shape were also examined. The study results showed a significant increase in the mean ANL (i.e. participants requested a better SNR for an acceptable listening situation) when high-frequency bandwidth was extended from 3 to 9 kHz and from 6 to 9 kHz. No change in the ANL of study participants was observed as a result of isolated modification to reverberation time or background noise stimulus. An interaction effect, however, of reverberation time and background noise stimulus was demonstrated. These findings may have implications for future design of hearing aid memory programs for listening to speech in the presence of broadband background noise.

  10. The Red Sea during the Last Glacial Maximum: implications for sea level reconstructions

    Science.gov (United States)

    Gildor, H.; Biton, E.; Peltier, W. R.

    2006-12-01

    The Red Sea (RS) is a semi-enclosed basin connected to the Indian Ocean via a narrow and shallow strait, and surrounded by arid areas which exhibits high sensitivity to atmospheric changes and sea level reduction. We have used the MIT GCM to investigate the changes in the hydrography and circulation in the RS in response to reduced sea level, variability in the Indian monsoons, and changes in atmospheric temperature and humidity that occurred during the Last Glacial Maximum (LGM). The model results show high sensitivity to sea level reduction especially in the salinity field (increasing with the reduction in sea level) together with a mild atmospheric impact. Sea level reduction decreases the stratification, increases subsurface temperatures, and alters the circulation pattern at the Strait of Bab el Mandab, which experiences a transition from submaximal flow to maximal flow. The reduction in sea level at LGM alters the location of deep water formation which shifts to an open sea convective site in the northern part of the RS compared to present day situation in which deep water is formed from the Gulf of Suez outflow. Our main result based on both the GCM and on a simple hydraulic control model which takes into account mixing process at the Strait of Bab El Mandeb, is that sea level was reduced by only ~100 m in the Bab El Mandeb region during the LGM, i.e. the water depth at the Hanish sill (the shallowest part in the Strait Bab el Mandab) was around 34 m. This result agrees with the recent reconstruction of the LGM low stand of the sea in this region based upon the ICE-5G (VM2) model of Peltier (2004).

  11. Maximum flood hazard assessment for OPG's deep geologic repository for low and intermediate level waste

    International Nuclear Information System (INIS)

    Nimmrichter, P.; McClintock, J.; Peng, J.; Leung, H.

    2011-01-01

    Ontario Power Generation (OPG) has entered a process to seek Environmental Assessment and licensing approvals to construct a Deep Geologic Repository (DGR) for Low and Intermediate Level Radioactive Waste (L&ILW) near the existing Western Waste Management Facility (WWMF) at the Bruce nuclear site in the Municipality of Kincardine, Ontario. In support of the design of the proposed DGR project, maximum flood stages were estimated for potential flood hazard risks associated with coastal, riverine and direct precipitation flooding. The estimation of lake/coastal flooding for the Bruce nuclear site considered potential extreme water levels in Lake Huron, storm surge and seiche, wind waves, and tsunamis. The riverine flood hazard assessment considered the Probable Maximum Flood (PMF) within the local watersheds, and within local drainage areas that will be directly impacted by the site development. A series of hydraulic models were developed, based on DGR project site grading and ditching, to assess the impact of a Probable Maximum Precipitation (PMP) occurring directly at the DGR site. Overall, this flood assessment concluded there is no potential for lake or riverine based flooding and the DGR area is not affected by tsunamis. However, it was also concluded from the results of this analysis that the PMF in proximity to the critical DGR operational areas and infrastructure would be higher than the proposed elevation of the entrance to the underground works. This paper provides an overview of the assessment of potential flood hazard risks associated with coastal, riverine and direct precipitation flooding that was completed for the DGR development. (author)

  12. Children acceptance of laser dental treatment

    Science.gov (United States)

    Lazea, Andreea; Todea, Carmen

    2016-03-01

    Objectives: To evaluate the dental anxiety level and the degree of acceptance of laser assisted pedodontic treatments from the children part. Also, we want to underline the advantages of laser use in pediatric dentistry, to make this technology widely used in treating dental problems of our children patients. Methods: Thirty pediatric dental patients presented in the Department of Pedodontics, University of Medicine and Pharmacy "Victor Babeş", Timişoara were evaluated using the Wong-Baker pain rating scale, wich was administered postoperatory to all patients, to assess their level of laser therapy acceptance. Results: Wong-Baker faces pain rating scale (WBFPS) has good validity and high specificity; generally it's easy for children to use, easy to compare and has good feasibility. Laser treatment has been accepted and tolerated by pediatric patients for its ability to reduce or eliminate pain. Around 70% of the total sample showed an excellent acceptance of laser dental treatment. Conclusions: Laser technology is useful and effective in many clinical situations encountered in pediatric dentistry and a good level of pacient acceptance is reported during all laser procedures on hard and soft tissues.

  13. Accident analysis of railway transportation of low-level radioactive and hazardous chemical wastes: Application of the /open quotes/Maximum Credible Accident/close quotes/ concept

    Energy Technology Data Exchange (ETDEWEB)

    Ricci, E.; McLean, R.B.

    1988-09-01

    The maximum credible accident (MCA) approach to accident analysis places an upper bound on the potential adverse effects of a proposed action by using conservative but simplifying assumptions. It is often used when data are lacking to support a more realistic scenario or when MCA calculations result in acceptable consequences. The MCA approach can also be combined with realistic scenarios to assess potential adverse effects. This report presents a guide for the preparation of transportation accident analyses based on the use of the MCA concept. Rail transportation of contaminated wastes is used as an example. The example is the analysis of the environmental impact of the potential derailment of a train transporting a large shipment of wastes. The shipment is assumed to be contaminated with polychlorinated biphenyls and low-level radioactivities of uranium and technetium. The train is assumed to plunge into a river used as a source of drinking water. The conclusions from the example accident analysis are based on the calculation of the number of foreseeable premature cancer deaths the might result as a consequence of this accident. These calculations are presented, and the reference material forming the basis for all assumptions and calculations is also provided.

  14. Accident analysis of railway transportation of low-level radioactive and hazardous chemical wastes: Application of the /open quotes/Maximum Credible Accident/close quotes/ concept

    International Nuclear Information System (INIS)

    Ricci, E.; McLean, R.B.

    1988-09-01

    The maximum credible accident (MCA) approach to accident analysis places an upper bound on the potential adverse effects of a proposed action by using conservative but simplifying assumptions. It is often used when data are lacking to support a more realistic scenario or when MCA calculations result in acceptable consequences. The MCA approach can also be combined with realistic scenarios to assess potential adverse effects. This report presents a guide for the preparation of transportation accident analyses based on the use of the MCA concept. Rail transportation of contaminated wastes is used as an example. The example is the analysis of the environmental impact of the potential derailment of a train transporting a large shipment of wastes. The shipment is assumed to be contaminated with polychlorinated biphenyls and low-level radioactivities of uranium and technetium. The train is assumed to plunge into a river used as a source of drinking water. The conclusions from the example accident analysis are based on the calculation of the number of foreseeable premature cancer deaths the might result as a consequence of this accident. These calculations are presented, and the reference material forming the basis for all assumptions and calculations is also provided

  15. Lawrence Livermore National Laboratory low-level waste systems performance assessment

    International Nuclear Information System (INIS)

    1990-11-01

    This Low-Level Radioactive Waste (LLW) Systems Performance Assessment (PA) presents a systematic analysis of the potential risks posed by the Lawrence Livermore National Laboratory (LLNL) waste management system. Potential risks to the public and environment are compared to established performance objectives as required by DOE Order 5820.2A. The report determines the associated maximum individual committed effective dose equivalent (CEDE) to a member of the public from LLW and mixed waste. A maximum annual CEDE of 0.01 mrem could result from routine radioactive liquid effluents. A maximum annual CEDE of 0.003 mrem could result from routine radioactive gaseous effluents. No other pathways for radiation exposure of the public indicated detectable levels of exposure. The dose rate, monitoring, and waste acceptance performance objectives were found to be adequately addressed by the LLNL Program. 88 refs., 3 figs., 17 tabs

  16. Level set segmentation of medical images based on local region statistics and maximum a posteriori probability.

    Science.gov (United States)

    Cui, Wenchao; Wang, Yi; Lei, Tao; Fan, Yangyu; Feng, Yan

    2013-01-01

    This paper presents a variational level set method for simultaneous segmentation and bias field estimation of medical images with intensity inhomogeneity. In our model, the statistics of image intensities belonging to each different tissue in local regions are characterized by Gaussian distributions with different means and variances. According to maximum a posteriori probability (MAP) and Bayes' rule, we first derive a local objective function for image intensities in a neighborhood around each pixel. Then this local objective function is integrated with respect to the neighborhood center over the entire image domain to give a global criterion. In level set framework, this global criterion defines an energy in terms of the level set functions that represent a partition of the image domain and a bias field that accounts for the intensity inhomogeneity of the image. Therefore, image segmentation and bias field estimation are simultaneously achieved via a level set evolution process. Experimental results for synthetic and real images show desirable performances of our method.

  17. Low-level radiation: a review of current estimates of hazards to human populations

    International Nuclear Information System (INIS)

    Myers, D.K.

    1977-12-01

    Mankind has always lived with low levels of ionizing radiation from natural sources. This ionizing radiation may induce cancers in irradiated persons and genetic defects in the descendents of irradiated persons. The internationally accepted estimates of risks suggest that the numbers of cancers and genetic defects induced in the general population by natural background radiation are not more than about 1% of the numbers of cancers and genetic defects normally present in the general population. The added risks to the general public due to any prospective nuclear power program are minute compared to those from background radiation. At the maximum permissible levels of radiation exposures for occupational workers, the predicted number of fatal cancers induced would lead to a reduction in average life-span from 73.0 years to about 72.7 years. Since occupational exposures are usually much less than maximum permissible levels, the risks are correspondingly reduced. These occupational risks are comparable to those in most other industries and occupations. Some areas of uncertainty in the accepted risk estimates are discussed in detail in this review. (author)

  18. The assessment of the impact of socio-economic factors in accepting cancer using the Acceptance of Illness Scale (AIS).

    Science.gov (United States)

    Czerw, Aleksandra I; Bilińska, Magdalena; Deptała, Andrzej

    2016-01-01

    The paper presents the results of examining the level of acceptance of the illness in cancer patients using the Acceptance of Illness Scale (AIS). The study involved cancer patients treated at the Central Clinical Hospital of the Ministry the Interior in Warsaw in 2014. The questionnaire comprised basic demographic questions (socio-economic factors) and the AIS test estimating the level of illness acceptance in patients. For the group of patients in the research group, the arithmetic mean amounted to 27.56 points. The period of time that elapsed between the first cancer diagnosis and the start of the study did not influence the score of accepting illness. The acceptance of illness in patients diagnosed with metastases differed from the acceptance of illness by patients diagnosed with metastatic cancer. Females obtained the average of 29.59 in the AIS test, whereas the average in male patients was 26.17. The patients' age did not impact the AIS test. There were no differences in the AIS test results between a group of people with secondary education and a group of people with higher education. There were no differences in the AIS test results between employed individuals versus pensioners. The inhabitants of cities were characterized by the highest degree of acceptance of their health condition. The lowest degree of acceptance of illness was observed in the group with the lowest average incomes. In the group of married individuals the average degree of acceptance of illness amounted to 27.37 points. The average degree of acceptance of illness in patients that declared themselves as single amounted to 25.75. The average degree of acceptance of illness in the study group was 27.56 points, which is a relatively high level of acceptance of cancer. The main socio-economic factor, which influenced the AIS test results was whether metastases were diagnosed or not. There were no differences between patients in groups where the time that elapsed from the first diagnosis of

  19. The assessment of the impact of socio-economic factors in accepting cancer using the Acceptance of Illness Scale (AIS

    Directory of Open Access Journals (Sweden)

    Aleksandra I. Czerw

    2015-11-01

    Full Text Available Aim of the study : The paper presents the results of examining the level of acceptance of the illness in cancer patients using the Acceptance of Illness Scale (AIS. Materials and methods: The study involved cancer patients treated at the Central Clinical Hospital of the Ministry the Interior in Warsaw in 2014. The questionnaire comprised basic demographic questions (socio-economic factors and the AIS test estimating the level of illness acceptance in patients. Results : For the group of patients in the research group, the arithmetic mean amounted to 27.56 points. The period of time that elapsed between the first cancer diagnosis and the start of the study did not influence the score of accepting illness. The acceptance of illness in patients diagnosed with metastases differed from the acceptance of illness by patients diagnosed with metastatic cancer. Females obtained the average of 29.59 in the AIS test, whereas the average in male patients was 26.17. The patients’ age did not impact the AIS test. There were no differences in the AIS test results between a group of people with secondary education and a group of people with higher education. There were no differences in the AIS test results between employed individuals versus pensioners. The inhabitants of cities were characterized by the highest degree of acceptance of their health condition. The lowest degree of acceptance of illness was observed in the group with the lowest average incomes. In the group of married individuals the average degree of acceptance of illness amounted to 27.37 points. The average degree of acceptance of illness in patients that declared themselves as single amounted to 25.75. Conclusions : The average degree of acceptance of illness in the study group was 27.56 points, which is a relatively high level of acceptance of cancer. The main socio-economic factor, which influenced the AIS test results was whether metastases were diagnosed or not. There were no

  20. Consumer Acceptance of Population-Level Intervention Strategies for Healthy Food Choices: The Role of Perceived Effectiveness and Perceived Fairness

    Directory of Open Access Journals (Sweden)

    Colin Bos

    2015-09-01

    Full Text Available The present study investigates acceptance of intervention strategies for low-calorie snack choices that vary regarding the effect they have on consumers’ freedom of choice (providing information, guiding choice through (disincentives, and restricting choice. We examine the mediating effects of perceived effectiveness and perceived fairness, and the moderating effects of barriers to choose low-calorie snacks and perceived responsibility for food choice. Data was collected through an online survey, involving three waves that were completed over a seven week timespan. Information was collected on barriers and perceived responsibility, and evaluations of a total of 128 intervention strategies with varying levels of intrusiveness that were further systematically varied in terms of source, location, approach/avoidance, type, and severity. A total of 1173 respondents completed all three waves. We found that the effect of intervention intrusiveness on acceptance was mediated by the perceived personal- and societal effectiveness, and the perceived fairness of interventions. For barriers and perceived responsibility, only main effects on intervention-specific beliefs were found. Government interventions were accepted less than interventions by food manufacturers. In conclusion, the present study shows that acceptance of interventions depends on perceptions of personal- and societal effectiveness and fairness, thereby providing novel starting points for increasing acceptance of both existing and new food choice interventions.

  1. Consumer Acceptance of Population-Level Intervention Strategies for Healthy Food Choices: The Role of Perceived Effectiveness and Perceived Fairness

    Science.gov (United States)

    Bos, Colin; Van Der Lans, Ivo; Van Rijnsoever, Frank; Van Trijp, Hans

    2015-01-01

    The present study investigates acceptance of intervention strategies for low-calorie snack choices that vary regarding the effect they have on consumers’ freedom of choice (providing information, guiding choice through (dis)incentives, and restricting choice). We examine the mediating effects of perceived effectiveness and perceived fairness, and the moderating effects of barriers to choose low-calorie snacks and perceived responsibility for food choice. Data was collected through an online survey, involving three waves that were completed over a seven week timespan. Information was collected on barriers and perceived responsibility, and evaluations of a total of 128 intervention strategies with varying levels of intrusiveness that were further systematically varied in terms of source, location, approach/avoidance, type, and severity. A total of 1173 respondents completed all three waves. We found that the effect of intervention intrusiveness on acceptance was mediated by the perceived personal- and societal effectiveness, and the perceived fairness of interventions. For barriers and perceived responsibility, only main effects on intervention-specific beliefs were found. Government interventions were accepted less than interventions by food manufacturers. In conclusion, the present study shows that acceptance of interventions depends on perceptions of personal- and societal effectiveness and fairness, thereby providing novel starting points for increasing acceptance of both existing and new food choice interventions. PMID:26389949

  2. Consumer Acceptance of Population-Level Intervention Strategies for Healthy Food Choices: The Role of Perceived Effectiveness and Perceived Fairness.

    Science.gov (United States)

    Bos, Colin; Lans, Ivo Van Der; Van Rijnsoever, Frank; Van Trijp, Hans

    2015-09-15

    The present study investigates acceptance of intervention strategies for low-calorie snack choices that vary regarding the effect they have on consumers' freedom of choice (providing information, guiding choice through (dis)incentives, and restricting choice). We examine the mediating effects of perceived effectiveness and perceived fairness, and the moderating effects of barriers to choose low-calorie snacks and perceived responsibility for food choice. Data was collected through an online survey, involving three waves that were completed over a seven week timespan. Information was collected on barriers and perceived responsibility, and evaluations of a total of 128 intervention strategies with varying levels of intrusiveness that were further systematically varied in terms of source, location, approach/avoidance, type, and severity. A total of 1173 respondents completed all three waves. We found that the effect of intervention intrusiveness on acceptance was mediated by the perceived personal- and societal effectiveness, and the perceived fairness of interventions. For barriers and perceived responsibility, only main effects on intervention-specific beliefs were found. Government interventions were accepted less than interventions by food manufacturers. In conclusion, the present study shows that acceptance of interventions depends on perceptions of personal- and societal effectiveness and fairness, thereby providing novel starting points for increasing acceptance of both existing and new food choice interventions.

  3. The regulation of starch accumulation in Panicum maximum Jacq ...

    African Journals Online (AJOL)

    ... decrease the starch level. These observations are discussed in relation to the photosynthetic characteristics of P. maximum. Keywords: accumulation; botany; carbon assimilation; co2 fixation; growth conditions; mesophyll; metabolites; nitrogen; nitrogen levels; nitrogen supply; panicum maximum; plant physiology; starch; ...

  4. Sustainability and acceptance - new challenges for nuclear energy

    International Nuclear Information System (INIS)

    Lensa, W. von

    2001-01-01

    This paper discusses the concept of sustainability in relation to acceptance of nuclear energy. Acceptance is viewed in terms of public acceptance, industrial acceptance, and internal acceptance/consensus within the nuclear community. It addresses sustainability criteria, the need for innovation, and the different levels of acceptability. The mechanisms of risk perception are discussed along with the technological consequences from risk perception mechanisms leading to specific objections against nuclear energy. (author)

  5. Waste Acceptance System Requirements document (WASRD)

    International Nuclear Information System (INIS)

    1993-01-01

    This Waste Acceptance System Requirements document (WA-SRD) describes the functions to be performed and the technical requirements for a Waste Acceptance System for accepting spent nuclear fuel (SNF) and high-level radioactive waste (HLW) into the Civilian Radioactive Waste Management System (CRWMS). This revision of the WA-SRD addresses the requirements for the acceptance of HLW. This revision has been developed as a top priority document to permit DOE's Office of Environmental Restoration and Waste Management (EM) to commence waste qualification runs at the Savannah River Site's (SRS) Defense Waste Processing Facility (DWPF) in a timely manner. Additionally, this revision of the WA-SRD includes the requirements from the Physical System Requirements -- Accept Waste document for the acceptance of SNF. A subsequent revision will fully address requirements relative to the acceptance of SNF

  6. Maximum coherent superposition state achievement using a non-resonant pulse train in non-degenerate three-level atoms

    International Nuclear Information System (INIS)

    Deng, Li; Niu, Yueping; Jin, Luling; Gong, Shangqing

    2010-01-01

    The coherent superposition state of the lower two levels in non-degenerate three-level Λ atoms is investigated using the accumulative effects of non-resonant pulse trains when the repetition period is smaller than the decay time of the upper level. First, using a rectangular pulse train, the accumulative effects are re-examined in the non-resonant two-level atoms and the modified constructive accumulation equation is analytically given. The equation shows that the relative phase and the repetition period are important in the accumulative effect. Next, under the modified equation in the non-degenerate three-level Λ atoms, we show that besides the constructive accumulation effect, the use of the partial constructive accumulation effect can also achieve the steady state of the maximum coherent superposition state of the lower two levels and the latter condition is relatively easier to manipulate. The analysis is verified by numerical calculations. The influence of the external levels in such a case is also considered and we find that it can be avoided effectively. The above analysis is also applicable to pulse trains with arbitrary envelopes.

  7. Aflatoxin M1 levels in raw milk, pasteurised milk and infant formula

    Directory of Open Access Journals (Sweden)

    Sharaf S. Omar

    2016-06-01

    Full Text Available The incidence of contamination of aflatoxin M1 (AFM1 in milk samples collected from the Jordanian market was investigated by using the competitive enzyme linked immunosorbent assay (ELISA technique. A total of 175 samples were collected during 2014-2015. All tested samples were contaminated with various levels of AFM1 ranging from 9.71 to 288.68 ng/kg. The concentration of AFM1 in 66% of fresh milk samples was higher than the maximum tolerance limit accepted by the European Union (50 ng/kg and 23% higher than the maximum tolerance limit accepted by the US (500 ng/kg. Percentages of contaminated raw cow, sheep, goat and camel milk exceeding the European tolerance limit were 60, 85, 75 and 0%, respectively. Of AFM1 contaminated pasteurised cow milk samples, 12% exceeded the European tolerance limit with a range of contamination between 14.60 and 216.78 ng/kg. For infant formula samples, the average concentration of AFM1 was 120.26 ng/kg (range from 16.55 to 288.68 ng/kg, the concentration of AFM1 in 85% of infant formula samples was higher than the maximum tolerance limit accepted by the European Union and the US (25 ng/kg.

  8. The Effects of a Maximal Power Training Cycle on the Strength, Maximum Power, Vertical Jump Height and Acceleration of High-Level 400-Meter Hurdlers

    Science.gov (United States)

    Balsalobre-Fernández, Carlos; Tejero-González, Carlos Mª; del Campo-Vecino, Juan; Alonso-Curiel, Dionisio

    2013-01-01

    The aim of this study was to determine the effects of a power training cycle on maximum strength, maximum power, vertical jump height and acceleration in seven high-level 400-meter hurdlers subjected to a specific training program twice a week for 10 weeks. Each training session consisted of five sets of eight jump-squats with the load at which each athlete produced his maximum power. The repetition maximum in the half squat position (RM), maximum power in the jump-squat (W), a squat jump (SJ), countermovement jump (CSJ), and a 30-meter sprint from a standing position were measured before and after the training program using an accelerometer, an infra-red platform and photo-cells. The results indicated the following statistically significant improvements: a 7.9% increase in RM (Z=−2.03, p=0.021, δc=0.39), a 2.3% improvement in SJ (Z=−1.69, p=0.045, δc=0.29), a 1.43% decrease in the 30-meter sprint (Z=−1.70, p=0.044, δc=0.12), and, where maximum power was produced, a change in the RM percentage from 56 to 62% (Z=−1.75, p=0.039, δc=0.54). As such, it can be concluded that strength training with a maximum power load is an effective means of increasing strength and acceleration in high-level hurdlers. PMID:23717361

  9. Low-level toxicity of chemicals: No acceptable levels?

    Directory of Open Access Journals (Sweden)

    Bruce P Lanphear

    2017-12-01

    Full Text Available Over the past 3 decades, in a series of studies on some of the most extensively studied toxic chemicals and pollutants, scientists have found that the amount of toxic chemical linked with the development of a disease or death-which is central to determining "safe" or "hazardous" levels-is proportionately greater at the lowest dose or levels of exposure. These results, which are contrary to the way the United States Environmental Protection Agency (EPA and other regulatory agencies assess the risk of chemicals, indicate that we have underestimated the impact of toxic chemicals on death and disease. If widely disseminated chemicals and pollutants-like radon, lead, airborne particles, asbestos, tobacco, and benzene-do not exhibit a threshold and are proportionately more toxic at the lowest levels of exposure, we will need to achieve near-zero exposures to protect public health.

  10. Paving the road to maximum productivity.

    Science.gov (United States)

    Holland, C

    1998-01-01

    "Job security" is an oxymoron in today's environment of downsizing, mergers, and acquisitions. Workers find themselves living by new rules in the workplace that they may not understand. How do we cope? It is the leader's charge to take advantage of this chaos and create conditions under which his or her people can understand the need for change and come together with a shared purpose to effect that change. The clinical laboratory at Arkansas Children's Hospital has taken advantage of this chaos to down-size and to redesign how the work gets done to pave the road to maximum productivity. After initial hourly cutbacks, the workers accepted the cold, hard fact that they would never get their old world back. They set goals to proactively shape their new world through reorganizing, flexing staff with workload, creating a rapid response laboratory, exploiting information technology, and outsourcing. Today the laboratory is a lean, productive machine that accepts change as a way of life. We have learned to adapt, trust, and support each other as we have journeyed together over the rough roads. We are looking forward to paving a new fork in the road to the future.

  11. When is physician assisted suicide or euthanasia acceptable?

    Science.gov (United States)

    Frileux, S; Lelièvre, C; Muñoz Sastre, M T; Mullet, E; Sorum, P C

    2003-12-01

    To discover what factors affect lay people's judgments of the acceptability of physician assisted suicide and euthanasia and how these factors interact. Participants rated the acceptability of either physician assisted suicide or euthanasia for 72 patient vignettes with a five factor design--that is, all combinations of patient's age (three levels); curability of illness (two levels); degree of suffering (two levels); patient's mental status (two levels), and extent of patient's requests for the procedure (three levels). Convenience sample of 66 young adults, 62 middle aged adults, and 66 older adults living in western France. In accordance with the functional theory of cognition of N H Anderson, main effects, and interactions among patient factors and participants' characteristics were investigated by means of both graphs and ANOVA. Patient requests were the most potent determinant of acceptability. Euthanasia was generally less acceptable than physician assisted suicide, but this difference disappeared when requests were repetitive. As their own age increased, participants placed more weight on patient age as a criterion of acceptability. People's judgments concur with legislation to require a repetition of patients' requests for a life ending act. Younger people, who frequently are decision makers for elderly relatives, place less emphasis on patient's age itself than do older people.

  12. The calculation of maximum permissible exposure levels for laser radiation

    International Nuclear Information System (INIS)

    Tozer, B.A.

    1979-01-01

    The maximum permissible exposure data of the revised standard BS 4803 are presented as a set of decision charts which ensure that the user automatically takes into account such details as pulse length and pulse pattern, limiting angular subtense, combinations of multiple wavelength and/or multiple pulse lengths, etc. The two decision charts given are for the calculation of radiation hazards to skin and eye respectively. (author)

  13. Pain intensity in patients with juvenile idiopathic arthritis with respect to the level of their activity and disease acceptance

    Directory of Open Access Journals (Sweden)

    Grażyna Cepuch

    2014-11-01

    Full Text Available Objectives: Being diagnosed with a chronic disease, such as juvenile idiopathic arthritis (JIA, may adversely affect the activity of a young person. Additionally, the pain associated with the disease may cause difficulty accepting it. The aim was to assess the intensity of pain as well as the degree of activity and acceptance of the disease in young people aged 14–18 years with JIA. Material and methods : The study group consisted of youth of both genders suffering from JIA aged 14–18 years during remission of the disease. The study included 50 people and used the following: numerical rating scale (NRS 0–10, Cantril ladder, activity scale of own authorship (grouped items of the questionnaire form subscales of: tiredness, physical activity, social and intellectual activity and Acceptance of Illness Scale (AIS. Statistical analysis included the following tests: Mann-Whitney U test, Wilcoxon’s, χ2 test, Fisher’s, and Spearman rank correlation. The statistical significance level was set as p value below 0.05. Results : The majority of the respondents observed currently do not feel pain or feel pain of low intensity. The young people are physically, psychologically and socially active. The majority of patients accept their illness. The patients who suffer from pain on the NRS scale within 4–7 points do not adapt to living with the disease as do patients without pain or experiencing pain of low intensity. There was a strong correlation between acceptance of the disease at the time of the study determined by the Cantril ladder and AIS. Conclusions : 1. The pain suffered by patients with juvenile idiopathic arthritis (JIA has undoubtedly a negative impact on their activity and acceptance of the disease. 2. It seems to be crucial to recognize pain as a significant determinant of acceptance of the disease.

  14. Solar maximum mission panel jettison analysis remote manipulator system

    Science.gov (United States)

    Bauer, R. B.

    1980-01-01

    A study is presented of the development of the Remote Manipulator System (RMS) configurations for jettison of the solar panels on the Solar Maximum Mission/Multimission Satellite. A valid RMS maneuver between jettison configurations was developed. Arm and longeron loads and effector excursions due to the solar panel jettison were determined to see if they were within acceptable limits. These loads and end effector excursions were analyzed under two RMS modes, servos active in position hold submode, and in the brakes on mode.

  15. County-Level Climate Uncertainty for Risk Assessments: Volume 18 Appendix Q - Historical Maximum Near-Surface Wind Speed.

    Energy Technology Data Exchange (ETDEWEB)

    Backus, George A.; Lowry, Thomas Stephen; Jones, Shannon M; Walker, La Tonya Nicole; Roberts, Barry L; Malczynski, Leonard A.

    2017-06-01

    This report uses the CMIP5 series of climate model simulations to produce country- level uncertainty distributions for use in socioeconomic risk assessments of climate change impacts. It provides appropriate probability distributions, by month, for 169 countries and autonomous-areas on temperature, precipitation, maximum temperature, maximum wind speed, humidity, runoff, soil moisture and evaporation for the historical period (1976-2005), and for decadal time periods to 2100. It also provides historical and future distributions for the Arctic region on ice concentration, ice thickness, age of ice, and ice ridging in 15-degree longitude arc segments from the Arctic Circle to 80 degrees latitude, plus two polar semicircular regions from 80 to 90 degrees latitude. The uncertainty is meant to describe the lack of knowledge rather than imprecision in the physical simulation because the emphasis is on unfalsified risk and its use to determine potential socioeconom ic impacts. The full report is contained in 27 volumes.

  16. County-Level Climate Uncertainty for Risk Assessments: Volume 4 Appendix C - Historical Maximum Near-Surface Air Temperature.

    Energy Technology Data Exchange (ETDEWEB)

    Backus, George A.; Lowry, Thomas Stephen; Jones, Shannon M; Walker, La Tonya Nicole; Roberts, Barry L; Malczynski, Leonard A.

    2017-06-01

    This report uses the CMIP5 series of climate model simulations to produce country- level uncertainty distributions for use in socioeconomic risk assessments of climate change impacts. It provides appropriate probability distributions, by month, for 169 countries and autonomous-areas on temperature, precipitation, maximum temperature, maximum wind speed, humidity, runoff, soil moisture and evaporation for the historical period (1976-2005), and for decadal time periods to 2100. It also provides historical and future distributions for the Arctic region on ice concentration, ice thickness, age of ice, and ice ridging in 15-degree longitude arc segments from the Arctic Circle to 80 degrees latitude, plus two polar semicircular regions from 80 to 90 degrees latitude. The uncertainty is meant to describe the lack of knowledge rather than imprecision in the physical simulation because the emphasis is on unfalsified risk and its use to determine potential socioeconomic impacts. The full report is contained in 27 volumes.

  17. Acceptability of a low and intermediate level radioactive waste repository

    International Nuclear Information System (INIS)

    Zeleznik, N.; Polic, M.

    2000-01-01

    Siting of a radioactive waste repository, even for the waste of low and intermediate level (LILW) radioactivity, presents a great problem in almost every country that produces such waste. The main problem is not a technical one, but socio-psychological, namely the acceptability of this kind of repository. In general, people are opposed to any such kind of facility in their vicinity (NIMBY). In this study we try to establish the factors that influence people's behavior regarding the construction of a radioactive waste repository in their local community, with the use of Ajzen's model of planned behavior. Two different scenarios about the construction of a radioactive waste repository in their community, together with a set of questions were presented to participants from different schools. Data from the survey were analysed by multivariate methods, and a model of relevant behaviour was proposed. From the results it can be seen that different approaches to local community participation in site selection process slightly influence people's attitudes towards the LILW repository, while significant differences in answers were found in the responses which depend on participants' knowledge. Therefore the RAO Agency will further intensify preparation of the relevant communication plan and start with its implementation to support LILW repository site selection process, which will also include educational programme. (author)

  18. Derivation of Waste Acceptance Criteria for Low and Intermediate Level Waste in Surface Disposal Facility

    International Nuclear Information System (INIS)

    Gagner, L.; Voinis, S.

    2000-01-01

    In France, low- and intermediate-level radioactive wastes are disposed in a near-surface facility, at Centre de l'Aube disposal facility. This facility, which was commissioned in 1992, has a disposal capacity of one million cubic meters, and will be operated up to about 2050. It took over the job from Centre de la Manche, which was commissioned in 1969 and shut down in 1994, after having received about 520,000 cubic meters of wastes. The Centre de l'Aube disposal facility is designed to receive a many types of waste produced by nuclear power plants, reprocessing, decommissioning, as well as by the industry, hospitals and armed forces. The limitation of radioactive transfer to man and the limitation of personnel exposure in all situations considered plausible require limiting the total activity of the waste disposed in the facility as well as the activity of each package. The paper presents how ANDRA has derived the activity-related acceptance criteria, based on the safety analysis. In the French methodology, activity is considered as end-point for deriving the concentration limits per package, whereas it is the starting point for deriving the total activity limits. For the concentration limits (called here LMA) the approach consists of five steps: the determination of radionuclides important for safety with regards to operational and long-term safety, the use of relevant safety scenarios as a tool to derive quantitative limits, the setting of dose constraint per situation associated with scenarios, the setting of contribution factor per radionuclide, and the calculation of concentration activity limits. An exhaustive survey has been performed and has shown that the totality of waste packages which should be delivered by waste generators are acceptable in terms of activity limits in the Centre de l'Aube. Examples of concentration activity limits derived from this methodology are presented. Furthermore those limits have been accepted by the French regulatory body and

  19. MEASURING LEVEL OF ACCEPTANCE OF PEOPLE WITH DISABILITIESAND THEIR FAMILIES

    Directory of Open Access Journals (Sweden)

    HARAZ Svetlana

    2017-11-01

    Full Text Available The group of persons with disabilities represents a group at immediate risk of social exclusion. Different researchers offer us analyses of the phenomenon of exclusion of different groups of population, but we can find very few studies regarding the measurement of social distance towards the groups at risk of exclusion. We set the goal to measure the Indices of Social Distance (ISD towards the following groups: family that cares the child with disabilities; adult person with disabilities and the child with disabilities. The measurement was performed using the instrument – Bogardus Scale. According to this technique, we have: if the distance is bigger, than the social group is lesser accepted. The minimum ISD counted for our researched groups: the family caring child/ children with disabilities; adult persons with disabilities and children/adolescents with disabilities, confirms the fact that the social distance expressed by people towards these groups is minimal respectively the groups are accepted.

  20. Relative sea-level changes and crustal movements in Britain and Ireland since the Last Glacial Maximum

    Science.gov (United States)

    Shennan, Ian; Bradley, Sarah L.; Edwards, Robin

    2018-05-01

    The new sea-level database for Britain and Ireland contains >2100 data points from 86 regions and records relative sea-level (RSL) changes over the last 20 ka and across elevations ranging from ∼+40 to -55 m. It reveals radically different patterns of RSL as we move from regions near the centre of the Celtic ice sheet at the last glacial maximum to regions near and beyond the ice limits. Validated sea-level index points and limiting data show good agreement with the broad patterns of RSL change predicted by current glacial isostatic adjustment (GIA) models. The index points show no consistent pattern of synchronous coastal advance and retreat across different regions, ∼100-500 km scale, indicating that within-estuary processes, rather than decimetre- and centennial-scale oscillations in sea level, produce major controls on the temporal pattern of horizontal shifts in coastal sedimentary environments. Comparisons between the database and GIA model predictions for multiple regions provide potentially powerful constraints on various characteristics of global GIA models, including the magnitude of MWP1A, the final deglaciation of the Laurentide ice sheet and the continued melting of Antarctica after 7 ka BP.

  1. The last glacial maximum

    Science.gov (United States)

    Clark, P.U.; Dyke, A.S.; Shakun, J.D.; Carlson, A.E.; Clark, J.; Wohlfarth, B.; Mitrovica, J.X.; Hostetler, S.W.; McCabe, A.M.

    2009-01-01

    We used 5704 14C, 10Be, and 3He ages that span the interval from 10,000 to 50,000 years ago (10 to 50 ka) to constrain the timing of the Last Glacial Maximum (LGM) in terms of global ice-sheet and mountain-glacier extent. Growth of the ice sheets to their maximum positions occurred between 33.0 and 26.5 ka in response to climate forcing from decreases in northern summer insolation, tropical Pacific sea surface temperatures, and atmospheric CO2. Nearly all ice sheets were at their LGM positions from 26.5 ka to 19 to 20 ka, corresponding to minima in these forcings. The onset of Northern Hemisphere deglaciation 19 to 20 ka was induced by an increase in northern summer insolation, providing the source for an abrupt rise in sea level. The onset of deglaciation of the West Antarctic Ice Sheet occurred between 14 and 15 ka, consistent with evidence that this was the primary source for an abrupt rise in sea level ???14.5 ka.

  2. Efficiency of patients with carcinoma and acceptance of the disease

    Directory of Open Access Journals (Sweden)

    Marzena Kamińska

    2014-04-01

    Full Text Available Introduction: Human functioning is based on physical, psychological, social and spiritual areas. The emergence of cancer and all types of problems affect these areas. Adapting to cancer is very important for the process of therapy, and acceptance of the disease is its determinant. Aim of the research study : To determine the relationship between oncological patients physical fitness and their acceptance of the disease. Material and methods: The following research techniques and tools have been used: a questionnaire survey, the Repta operation scale for assessing the functionality of patients in the course of the disease, a modified Pain Assessment Worksheet for evaluating the intensity of pain and its impact on daily activities and the AIS scale to assess the degree of acceptance of the disease. Results: Most of the respondents were fully efficient in the field of the activities of daily living. The vast majority of respondents did not feel pain, or felt pain that could be taken lightly. Pain that made daily functioning difficult, particularly in mobility and locomotion, concerned only persons over 60 years old. In the study group there was dominantly an average degree of acceptance of the disease; a small group was marked by a high level, and only a few people showed a lack of acceptance of the disease. Independent people and people in need of assistance accepted the illness at a medium level, and vulnerable patients showed the lowest level of acceptance. Conclusions : The efficiency of patients with cancer affects the level of acceptance of the disease. Cancer for the majority of respondents is not an obstacle in performing basic activities. Most respondents accept the disease, a small part selects a high level, and only a few people show a lack of acceptance of the disease.

  3. Acceptance testing and quality assurance of Simulix evolution radiotherapy simulator

    International Nuclear Information System (INIS)

    Sinha, Ashutosh; Singh, Navin; Gurjar, Om Prakash; Bagdare, Priyusha

    2015-01-01

    The success of radiotherapy depends on precise treatment simulation and proper patient positioning. The simulator is a conventional radiographic and fluoroscopic system which emulates the geometrical positions of radiotherapy treatment unit. Hence, the acceptance tests and quality assurance (QA) of the simulator are important prior to its commissioning for the safe and precise clinical use. The verification of mechanical and optical readouts, field size, isocenter, optical and radiation field congruence were performed. The X-ray beam parameters were tested for kVp, mAs and consistency of radiation output. The flat panel detector performance was checked with respect to resolution, low contrast sensitivity (LCS), automatic dose rate control (ADRC), and gray image resolution (GIR). Gantry, table, and imaging system collision possibility was checked. Radiation survey around the room was also performed. The field size test for digital readout and on graph paper, the results of isocenter checkup for rotation of gantry, collimator, and couch, and the deviations observed in auto stop for various movements were found within the tolerance limits. Optical field and radiation field was found congruent. All the lasers were found aligned with the established isocenter. Maximum deviation for set and measured kV was found to be 3% in fluoro mode. The maximum deviation observed in mAs was 1.5% in 3-point as well as in 2-point film exposed mode. The X-ray output was found consistent. The results of tests for resolution, LCS, ADRC, and GIR of the flat panel detector were within tolerance limits. All the six safety interlocks were found working. Radiation level around the room was found within the acceptable limits. All the tests carried out were found within the tolerance limits. The data which has been taken in this study will provide basic support to the routine QA of the simulator. (author)

  4. Public acceptance of small reactors

    International Nuclear Information System (INIS)

    McDougall, D.S.

    1997-01-01

    The success of any nuclear program requires acceptance by the local public and all levels of government involved in the decision to initiate a reactor program. Public acceptance of a nuclear energy source is a major challenge in successful initiation of a small reactor program. In AECL's experience, public acceptance will not be obtained until the public is convinced that the specific nuclear program is needed, safe and economic and environmental benefit to the community. The title of public acceptance is misleading. The objective of the program is a fully informed public. The program proponent cannot force public acceptance, which is beyond his control. He can, however, ensure that the public is informed. Once information has begun to flow to the public by various means as will be explained later, the proponent is responsible to ensure that the information that is provided by him and by others is accurate. Most importantly, and perhaps most difficult to accomplish, the proponent must develop a consultative process that allows the proponent and the public to agree on actions that are acceptable to the proponent and the community

  5. A Two-Stage Information-Theoretic Approach to Modeling Landscape-Level Attributes and Maximum Recruitment of Chinook Salmon in the Columbia River Basin.

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, William L.; Lee, Danny C.

    2000-11-01

    Many anadromous salmonid stocks in the Pacific Northwest are at their lowest recorded levels, which has raised questions regarding their long-term persistence under current conditions. There are a number of factors, such as freshwater spawning and rearing habitat, that could potentially influence their numbers. Therefore, we used the latest advances in information-theoretic methods in a two-stage modeling process to investigate relationships between landscape-level habitat attributes and maximum recruitment of 25 index stocks of chinook salmon (Oncorhynchus tshawytscha) in the Columbia River basin. Our first-stage model selection results indicated that the Ricker-type, stock recruitment model with a constant Ricker a (i.e., recruits-per-spawner at low numbers of fish) across stocks was the only plausible one given these data, which contrasted with previous unpublished findings. Our second-stage results revealed that maximum recruitment of chinook salmon had a strongly negative relationship with percentage of surrounding subwatersheds categorized as predominantly containing U.S. Forest Service and private moderate-high impact managed forest. That is, our model predicted that average maximum recruitment of chinook salmon would decrease by at least 247 fish for every increase of 33% in surrounding subwatersheds categorized as predominantly containing U.S. Forest Service and privately managed forest. Conversely, mean annual air temperature had a positive relationship with salmon maximum recruitment, with an average increase of at least 179 fish for every increase in 2 C mean annual air temperature.

  6. The maximum ground level concentration of air pollutant and the effect of plume rise on concentration estimates

    International Nuclear Information System (INIS)

    Mayhoub, A.B.; Azzam, A.

    1991-01-01

    The emission of an air pollutant from an elevated point source according to Gaussian plume model has been presented. An elementary theoretical treatment for both the highest possible ground-level concentration and the downwind distance at which this maximum occurs for different stability classes has been constructed. The effective height release modification was taken into consideration. An illustrative case study, namely, the emission from the research reactor in Inchas, has been studied. The results of these analytical treatments and of the derived semi-empirical formulae are discussed and presented in few illustrative diagrams

  7. Acceptance criteria for the ITER divertor vertical target

    International Nuclear Information System (INIS)

    Fouquet, S.; Schlosser, J.; Merola, M.; Durocher, A.; Escourbiac, F.; Grosman, A.; Missirlian, M.; Portafaix, C.

    2006-01-01

    In the frame of the toroidal pump limiter fabrication for Tore Supra, CEA developed a large experience of infrared test for acceptance of high heat flux components armoured with carbon fibre composite flat tiles. The test is based on a thermal transient induced by an alternative hot/cold water flow in the heat sink structure. The tile surface temperature transients are compared with those of a reference element, the maximum difference for each tile leading to a value called ΔT ref m ax . This method is proposed for the commissioning of plasma facing components for the ITER divertor vertical target. This paper describes the determination of the best acceptance criteria for the 'monoblock' geometry of the carbon part. First, it has been shown that the location and the extension of the defects could reliably be determined by monitoring both top and lateral surfaces during the test. Second, it was possible to fix an acceptance method based on ΔT ref m ax . Samples with calibrated defects are now under fabrication to validate the results

  8. Evaluation of communication and acceptance of the patients by medical personnel

    Science.gov (United States)

    Włoszczak-Szubzda, Anna; Jarosz, Mirosław J; Goniewicz, Mariusz; Goniewicz, Krzysztof

    The low level of patient satisfaction recorded in many studies and, at the same time, the level of frustration and burnout, disclosed by medics in the perception of the patient as a ‘problem’, incline to look for the causes of inadequate relationship between physician and patient. The aim of this study was to evaluate the level of acceptance of the patient by the medical personnel. The research problem was the acceptance level which was within the range of the communication skills of the nurses and doctors. Another aim was to discover the factors determining this level of acceptance. Two methods were used in the research process: 1) a diagnostic survey regarding the medical, professional communication skills; 2) testing of professional self-esteem from the medical aspect. The study population consisted of a total of 1,244 respondents divided into the following groups: registered nurses and doctors (729), students of nursing and medical faculties (515). The results of the research showed that in most cases the acceptance of the patient by the medical staff was ‘conditional’, which translated into the level of frustration or lack of satisfaction with their profession, and ultimately into the level of burnout. The level of patient acceptance by medical staff (unconditional acceptance), depended primarily on age, followed by their profession. However, the relationship between this acceptance and gender and work experience was statistically insignificant. As the method to improve this situation, the expansion of education in the field of interpersonal communication is proposed, adding issues related with both the conditional and unconditional acceptance of the patient, as well as issues regarding how to deal with the patient from the aspect of disease and the psycho-socio-spiritual area.

  9. Minimum and Maximum Potential Contributions to Future Sea Level Rise from Polar Ice Sheets

    Science.gov (United States)

    Deconto, R. M.; Pollard, D.

    2017-12-01

    New climate and ice-sheet modeling, calibrated to past changes in sea-level, is painting a stark picture of the future fate of the great polar ice sheets if greenhouse gas emissions continue unabated. This is especially true for Antarctica, where a substantial fraction of the ice sheet rests on bedrock more than 500-meters below sea level. Here, we explore the sensitivity of the polar ice sheets to a warming atmosphere and ocean under a range of future greenhouse gas emissions scenarios. The ice sheet-climate-ocean model used here considers time-evolving changes in surface mass balance and sub-ice oceanic melting, ice deformation, grounding line retreat on reverse-sloped bedrock (Marine Ice Sheet Instability), and newly added processes including hydrofracturing of ice shelves in response to surface meltwater and rain, and structural collapse of thick, marine-terminating ice margins with tall ice-cliff faces (Marine Ice Cliff Instability). The simulations improve on previous work by using 1) improved atmospheric forcing from a Regional Climate Model and 2) a much wider range of model physical parameters within the bounds of modern observations of ice dynamical processes (particularly calving rates) and paleo constraints on past ice-sheet response to warming. Approaches to more precisely define the climatic thresholds capable of triggering rapid and potentially irreversible ice-sheet retreat are also discussed, as is the potential for aggressive mitigation strategies like those discussed at the 2015 Paris Climate Conference (COP21) to substantially reduce the risk of extreme sea-level rise. These results, including physics that consider both ice deformation (creep) and calving (mechanical failure of marine terminating ice) expand on previously estimated limits of maximum rates of future sea level rise based solely on kinematic constraints of glacier flow. At the high end, the new results show the potential for more than 2m of global mean sea level rise by 2100

  10. Experimental verification of the imposing principle for maximum permissible levels of multicolor laser radiation

    Directory of Open Access Journals (Sweden)

    Ivashin V.A.

    2013-12-01

    Full Text Available Aims. The study presents the results of experimental research to verify the principle overlay for maximum permissible levels (MPL of multicolor laser radiation single exposure on eyes. This principle of the independence of the effects of radiation with each wavelength (the imposing principle, was founded and generalized to a wide range of exposure conditions. Experimental verification of this approach in relation to the impact of laser radiation on tissue fundus of an eye, as shows the analysis of the literature was not carried out. Material and methods. Was used in the experimental laser generating radiation with wavelengths: Л1 =0,532 microns, A2=0,556to 0,562 microns and A3=0,619to 0,621 urn. Experiments were carried out on eyes of rabbits with evenly pigmented eye bottom. Results. At comparison of results of processing of the experimental data with the calculated data it is shown that these levels are close by their parameters. Conclusions. For the first time in the Russian Federation had been performed experimental studies on the validity of multi-colored laser radiation on the organ of vision. In view of the objective coincidence of the experimental data with the calculated data, we can conclude that the mathematical formulas work.

  11. Top-level regulatory criteria for the standard MHTGR

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1986-10-15

    The Licensing Plan for the Standard MHTGR (Ref. 1) describes a program to support a U.S. Nuclear Regulatory Commission (NRC) design review and approval. The Plan calls for the submittal of Top-Level Regulatory Criteria to the NRC for concurrence with their completeness and acceptability for the MHTGR program. The Top-Level Regulatory Criteria are defined as the standards for judging licensability that directly specify acceptable limits for protection of the public health and safety and the environment. The criteria proposed herein are for normal plant operation and a broad spectrum of anticipated events, including accidents. The approach taken is to define a set of criteria which are general as opposed to being design specific. Specifically, it is recommended that criteria be met which: 1. Are less prescriptive than current regulation, thereby encouraging maximum flexibility in design approaches. 2. Are measurable. 3. Are not more strict than the criteria for current power plants.

  12. Nevada National Security Site Waste Acceptance Criteria

    International Nuclear Information System (INIS)

    2012-01-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept DOE non-radioactive classified waste, DOE non-radioactive hazardous classified waste, DOE low-level radioactive waste (LLW), DOE mixed low-level waste (MLLW), and U.S. Department of Defense (DOD) classified waste for permanent disposal. Classified waste is the only waste accepted for disposal that may be non-radioactive and will be required to meet the waste acceptance criteria for radioactive waste as specified in this document. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project (WMP) at (702) 295-7063, and your call will be directed to the appropriate contact.

  13. Nevada National Security Site Waste Acceptance Criteria

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Management

    2012-02-28

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept DOE non-radioactive classified waste, DOE non-radioactive hazardous classified waste, DOE low-level radioactive waste (LLW), DOE mixed low-level waste (MLLW), and U.S. Department of Defense (DOD) classified waste for permanent disposal. Classified waste is the only waste accepted for disposal that may be non-radioactive and will be required to meet the waste acceptance criteria for radioactive waste as specified in this document. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project (WMP) at (702) 295-7063, and your call will be directed to the appropriate contact.

  14. Individual-level characteristics associated with oral HIV test acceptability among Peruvian men who have sex with men and transgender women: a cross-sectional study.

    Science.gov (United States)

    Flores, Juan A; Brown, Brandon; León, Segundo R; Sánchez, Hugo; Galea, Jerome T

    2018-03-24

    Peruvian men who have sex with men (MSM) and transgender women (TGW) are highly vulnerable to HIV infection (HIV), but stigma, access issues and fear of venipuncture hamper testing. The oral HIV test-which uses oral fluids and provides results in 20 minutes-could reduce these barriers. The objective of this study was to determine the acceptability of the oral HIV test and the individual-level factors associated with its acceptability among MSM and TGW. We conducted a cross-sectional secondary analysis among Peruvian MSM and TGW attending a community-based health centre between February 2012 and February 2013 to determine the individual-level factors associated with oral HIV test acceptability. Of 334 participants, 88% were MSM and 12% TGW. Overall, 85% of participants indicated their acceptability of the oral HIV test. Acceptability was higher in MSM than TGW (85.7% vs 80.0%) but this difference was not significant. Factors associated with acceptability in MSM were: tertiary or higher education (prevalence ratio (PR)=1.18, 95% CI 1.06 to 1.32 and PR=1.16, 95% CI 1.03 to 1.30, respectively); sex with drug use (PR=1.19, 95% CI 1.05 to 1.36); believing that HIV is transmitted by saliva (PR=1.20, 95% CI 1.08 to 1.33); and potential use of the oral test at home (PR=1.56, 95% CI 1.32 to 1.85). The only factor associated with lower acceptability was having had first anal intercourse between 14 and 19 years of age (PR=0.89, 95% CI 0.80 to 0.98). We identified the individual factors associated with oral HIV test acceptability among Peruvian MSM and TGW. Expanded use of the oral HIV test to increase testing rates among Peruvian MSM and TGW is recommended. NCT01387412, post-results. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  15. Low-level radiation

    International Nuclear Information System (INIS)

    Myers, D.K.

    1982-05-01

    It is known that the normal incidence of cancer in human populations is increased by exposure to moderately high doses of ionizing radiation. At background radiation levels or at radiation levels which are 100 times greater, the potential health risks are considered to be directly proportional to the total accumulated dose of radiation. Some of the uncertainties associated with this assumption and with the accepted risk estimates have been critically reviewed in this document. The general scientific consensus at present suggests that the accepted risk estimates may exaggerate the actual risk of low levels of sparsely ionizing radiations (beta-, gamma- or X-rays) somewhat but are unlikely to overestimate the actual risks of densely ionizing radiations (fast neutrons, alpha-particles). At the maximum permissible levels of exposure for radiation workers in nuclear power stations, the potential health hazards in terms of life expectancy would be comparable to those encountered in transportation and public utilities or in the construction industry. At the average radiation exposures received by these workers in practice, the potential health hazards are similar to those associated with safe categories of industries. Uranium mining remains a relativly hazardous occupation. In terms of absolute numbers, the genetic hazards, which are less well established, are thought to be smaller than the carcinogenic hazards of radiation when only the first generation is considered but to be of the same order of magnitude as the carcinogenic hazards when the total number of induced genetic disorders is summed over all generations

  16. Recommendation of maximum allowable noise levels for offshore wind power systems; Empfehlung von Laermschutzwerten bei der Errichtung von Offshore-Windenergieanlagen (OWEA)

    Energy Technology Data Exchange (ETDEWEB)

    Werner, Stefanie [Umweltbundesamt, Dessau-Rosslau (Germany). Fachgebiet II 2.3

    2011-05-15

    When offshore wind farms are constructed, every single pile is hammered into the sediment by a hydraulic hammer. Noise levels at Horns Reef wind farm were in the range of 235 dB. The noise may cause damage to the auditory system of marine mammals. The Federal Environmental Office therefore recommends the definition of maximum permissible noise levels. Further, care should be taken that no marine mammals are found in the immediate vicinity of the construction site. (AKB)

  17. Particle Swarm Optimization Based of the Maximum Photovoltaic ...

    African Journals Online (AJOL)

    Photovoltaic electricity is seen as an important source of renewable energy. The photovoltaic array is an unstable source of power since the peak power point depends on the temperature and the irradiation level. A maximum peak power point tracking is then necessary for maximum efficiency. In this work, a Particle Swarm ...

  18. The Impact of Rendered Protein Meal Oxidation Level on Shelf-Life, Sensory Characteristics, and Acceptability in Extruded Pet Food.

    Science.gov (United States)

    Chanadang, Sirichat; Koppel, Kadri; Aldrich, Greg

    2016-07-28

    Pet foods are expected to have a shelf-life for 12 months or more. Sensory analysis can be used to determine changes in products and to estimate products' shelf-life. The objectives of this study were to (1) investigate how increasing levels of oxidation in rendered protein meals used to produce extruded pet food affected the sensory properties and (2) determine the effect of shelf-life on pet owners' acceptability of extruded pet food diet formulated without the use of preservative. Pet food diets contained beef meat bone meal (BMBM) and chicken byproduct meal (CBPM) in which the oxidation was retarded with ethoxyquin, mixed tocopherols, or none at all, and then extruded into dry pet foods. These samples represented low, medium, and high oxidation levels, respectively. Samples were stored for 0, 3, 6, 9, and 12 months at ambient temperature. Each time point, samples were evaluated by six highly trained descriptive panelists for sensory attributes related to oxidation. Samples without preservatives were chosen for the acceptability test, since the differences in sensory characteristics over storage time were more distinguishable in those samples. Pet owners evaluated samples for aroma, appearance and overall liking. Descriptive sensory analysis detected significant changes in oxidized-related sensory characteristics over storage time. However, the differences for CBPM samples were more pronounced and directional. The consumer study showed no differences in pet owners' acceptability for BMBM samples. However, the noticeable increase in aroma characteristics (rancid aroma 0.33-4.21) in CBPM samples over storage time did have a negative effect on consumer's liking (overall liking 5.52-4.95).

  19. NEVADA TEST SITE WASTE ACCEPTANCE CRITERIA

    International Nuclear Information System (INIS)

    U.S. DEPARTMENT OF ENERGY, NATIONAL NUCLEAR SECURITY ADMINISTRATION, NEVADA SITE OFFICE

    2005-01-01

    This document establishes the U. S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) waste acceptance criteria (WAC). The WAC provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive and mixed waste for disposal. Mixed waste generated within the State of Nevada by NNSA/NSO activities is accepted for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the Nevada Test Site Area 3 and Area 5 Radioactive Waste Management Site for storage or disposal

  20. Geometrical Acceptance Analysis for RPC PAC Trigger

    CERN Document Server

    Seo, Eunsung

    2010-01-01

    The CMS(Compact Muon Solenoid) is one of the four experiments that will analyze the collision results of the protons accelerated by the Large Hardron Collider(LHC) at CERN(Conseil Europen pour la Recherche Nuclaire). In case of the CMS experiment, the trigger system is divided into two stages : The Level-1 Trigger and High Level Trigger. The RPC(Resistive Plate Chamber) PAC(PAttern Comparator) Trigger system, which is a subject of this thesis, is a part of the Level-1 Muon Trigger System. Main task of the PAC Trigger is to identify muons, measures transverse momenta and select the best muon candidates for each proton bunch collision occurring every 25 ns. To calculate the value of PAC Trigger efficiency for triggerable muon, two terms of different efficiencies are needed ; acceptance efficiency and chamber efficiency. Main goal of the works described in this thesis is obtaining the acceptance efficiency of the PAC Trigger in each logical cone. Acceptance efficiency is a convolution of the chambers geometry an...

  1. Prediction of the Maximum Number of Repetitions and Repetitions in Reserve From Barbell Velocity.

    Science.gov (United States)

    García-Ramos, Amador; Torrejón, Alejandro; Feriche, Belén; Morales-Artacho, Antonio J; Pérez-Castilla, Alejandro; Padial, Paulino; Haff, Guy Gregory

    2018-03-01

    To provide 2 general equations to estimate the maximum possible number of repetitions (XRM) from the mean velocity (MV) of the barbell and the MV associated with a given number of repetitions in reserve, as well as to determine the between-sessions reliability of the MV associated with each XRM. After determination of the bench-press 1-repetition maximum (1RM; 1.15 ± 0.21 kg/kg body mass), 21 men (age 23.0 ± 2.7 y, body mass 72.7 ± 8.3 kg, body height 1.77 ± 0.07 m) completed 4 sets of as many repetitions as possible against relative loads of 60%1RM, 70%1RM, 80%1RM, and 90%1RM over 2 separate sessions. The different loads were tested in a randomized order with 10 min of rest between them. All repetitions were performed at the maximum intended velocity. Both the general equation to predict the XRM from the fastest MV of the set (CV = 15.8-18.5%) and the general equation to predict MV associated with a given number of repetitions in reserve (CV = 14.6-28.8%) failed to provide data with acceptable between-subjects variability. However, a strong relationship (median r 2  = .984) and acceptable reliability (CV  .85) were observed between the fastest MV of the set and the XRM when considering individual data. These results indicate that generalized group equations are not acceptable methods for estimating the XRM-MV relationship or the number of repetitions in reserve. When attempting to estimate the XRM-MV relationship, one must use individualized relationships to objectively estimate the exact number of repetitions that can be performed in a training set.

  2. Nevada Test Site Waste Acceptance Criteria (NTSWAC)

    Energy Technology Data Exchange (ETDEWEB)

    NNSA/NSO Waste Management Project

    2008-06-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, Nevada Test Site Waste Acceptance Criteria (NTSWAC). The NTSWAC provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive (LLW) and LLW Mixed Waste (MW) for disposal.

  3. Nevada Test Site Waste Acceptance Criteria (NTSWAC)

    International Nuclear Information System (INIS)

    NNSA/NSO Waste Management Project

    2008-01-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, Nevada Test Site Waste Acceptance Criteria (NTSWAC). The NTSWAC provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive (LLW) and LLW Mixed Waste (MW) for disposal

  4. Sensory Acceptability of Squash (Cucurbita Maximain Making Ice Cream

    Directory of Open Access Journals (Sweden)

    Raymund B. Moreno

    2015-02-01

    Full Text Available - This experimental research was conducted to determine the sensory acceptability of mashed squash (Cucurbita Maxima of different proportions in making ice cream in terms of appearance, aroma, texture, taste and general acceptability. Five treatments were formulated in the study—four of which utilized mashed squash at various proportions and one treatment was used as the control variable which contains no mashed squash at all. The respondents of the study were the 20 Food Technology students and 10 faculty members of West Visayas State University Calinog Campus who were selected through random sampling. The respondents evaluated the finished products using a modified sensory evaluation score sheet based on Six Point Hedonic Scale. The statistical tools used were the means, standard deviation, Wilcoxon Signed Rank Test. The 0.01 alpha level was used as the criterion for acceptance or rejection of the null hypothesis. The result of the study led to the conclusion that there is a significant difference that existed in the level of acceptability of mashed squash in making ice cream in terms of appearance, aroma, and general acceptability, therefore the null hypothesis is rejected. However, no significant difference in the level of acceptability of using mashed squash in making ice cream in terms of taste and texture.

  5. Patients’ acceptance of corticotomy-assisted orthodontics

    Science.gov (United States)

    Zawawi, Khalid H

    2015-01-01

    Objective To study patients’ acceptance of corticotomy-assisted orthodontics as a treatment option. Methods Adult patients seeking orthodontic treatment were asked to complete two sets of questionnaires; the first set included questions about age, sex, and level of education and general questions about orthodontic treatment; and the second set was related to the corticotomy-assisted orthodontics. Before answering the corticotomy questions, a brief description of the clinical procedure was explained and photographs of an actual procedure were shown. Results A total of 150 subjects were approached and 129 (86%) agreed to answer the questionnaires (72 male and 57 female patients). Of these, only 3.1% did hear about corticotomy and 7.8% selected corticotomy instead of extraction. Fear from the surgery (53.2%) was the most frequent reason for not selecting corticotomy followed by fear from pain (36.9%). The acceptance of corticotomy between males and females was similar. No relationship was found between the level of education and prior knowledge of the procedure, P=0.857. Prior knowledge about corticotomy was not a factor in selecting it as a treatment option (P=0.556) to reduce the treatment time (P=0.427). Conclusion The acceptance of corticotomy-assisted orthodontics as a treatment option was low. Fear from the surgery was the main reason for not selecting it. The acceptance of corticotomy-assisted orthodontics was not related to patient’s level of education or sex. PMID:26316719

  6. Fast Acceptance by Common Experience

    Directory of Open Access Journals (Sweden)

    Nathan Berg

    2010-08-01

    Full Text Available Schelling (1969, 1971a,b, 1978 observed that macro-level patterns do not necessarily reflect micro-level intentions, desires or goals. In his classic model on neighborhood segregation which initiated a large and influential literature, individuals with no desire to be segregated from those who belong to other social groups nevertheless wind up clustering with their own type. Most extensions of Schelling's model have replicated this result. There is an important mismatch, however, between theory and observation, which has received relatively little attention. Whereas Schelling-inspired models typically predict large degrees of segregation starting from virtually any initial condition, the empirical literature documents considerable heterogeneity in measured levels of segregation. This paper introduces a mechanism that can produce significantly higher levels of integration and, therefore, brings predicted distributions of segregation more in line with real-world observation. As in the classic Schelling model, agents in a simulated world want to stay or move to a new location depending on the proportion of neighbors they judge to be acceptable. In contrast to the classic model, agents' classifications of their neighbors as acceptable or not depend lexicographically on recognition first and group type (e.g., ethnic stereotyping second. The FACE-recognition model nests classic Schelling: When agents have no recognition memory, judgments about the acceptability of a prospective neighbor rely solely on his or her group type (as in the Schelling model. A very small amount of recognition memory, however, eventually leads to different classifications that, in turn, produce dramatic macro-level effects resulting in significantly higher levels of integration. A novel implication of the FACE-recognition model concerns the large potential impact of policy interventions that generate modest numbers of face-to-face encounters with members of other social groups.

  7. An evaluation model for indoor environmental quality (IEQ) acceptance in residential buildings

    International Nuclear Information System (INIS)

    Lai, A.C.K.; Mui, K.W.; Wong, L.T.; Law, L.Y.

    2009-01-01

    The indoor environmental quality (IEQ) in residential buildings is examined from the prospect of an occupant's acceptance in four aspects: thermal comfort, indoor air quality, noise level and illumination level. Based on the evaluations by 125 occupants living in 32 typical residential apartments in Hong Kong, this study proposes empirical expressions to approximate the overall IEQ acceptance with respect to four contributors, namely operative temperature, carbon dioxide concentration, equivalent noise level and illumination level, via a multivariate logistic regression model. A range of IEQ acceptances for regular residential conditions is determined and the dependence of the predicted overall IEQ acceptance on the variations of the contributors is discussed. The proposed overall IEQ acceptance can be used as a quantitative assessment criterion for similar residential environments where an occupant's evaluation is expected. (author)

  8. Life-time risk of mortality due to different levels of alcohol consumption in seven European countries: implications for low-risk drinking guidelines.

    Science.gov (United States)

    Shield, Kevin D; Gmel, Gerrit; Gmel, Gerhard; Mäkelä, Pia; Probst, Charlotte; Room, Robin; Rehm, Jürgen

    2017-09-01

    Low-risk alcohol drinking guidelines require a scientific basis that extends beyond individual or group judgements of risk. Life-time mortality risks, judged against established thresholds for acceptable risk, may provide such a basis for guidelines. Therefore, the aim of this study was to estimate alcohol mortality risks for seven European countries based on different average daily alcohol consumption amounts. The maximum acceptable voluntary premature mortality risk was determined to be one in 1000, with sensitivity analyses of one in 100. Life-time mortality risks for different alcohol consumption levels were estimated by combining disease-specific relative risk and mortality data for seven European countries with different drinking patterns (Estonia, Finland, Germany, Hungary, Ireland, Italy and Poland). Alcohol consumption data were obtained from the Global Information System on Alcohol and Health, relative risk data from meta-analyses and mortality information from the World Health Organization. The variation in the life-time mortality risk at drinking levels relevant for setting guidelines was less than that observed at high drinking levels. In Europe, the percentage of adults consuming above a risk threshold of one in 1000 ranged from 20.6 to 32.9% for women and from 35.4 to 54.0% for men. Life-time risk of premature mortality under current guideline maximums ranged from 2.5 to 44.8 deaths per 1000 women in Finland and Estonia, respectively, and from 2.9 to 35.8 deaths per 1000 men in Finland and Estonia, respectively. If based upon an acceptable risk of one in 1000, guideline maximums for Europe should be 8-10 g/day for women and 15-20 g/day for men. If low-risk alcohol guidelines were based on an acceptable risk of one in 1000 premature deaths, then maximums for Europe should be 8-10 g/day for women and 15-20 g/day for men, and some of the current European guidelines would require downward revision. © 2017 Society for the Study of Addiction.

  9. Toward an acceptable nuclear future

    International Nuclear Information System (INIS)

    Weinberg, A.M.

    1977-11-01

    The nuclear option is in danger of being foreclosed. The trend toward antinuclearism may be reversed if concerns about low-level radiation insult can be shown ultimately to be without foundation; evidence for this speculation is presented. Nevertheless it is suggested that the nuclear enterprise itself must propose new initiatives to increase the acceptability of nuclear energy. A key element of an acceptable nuclear future is cluster siting of reactors. This siting plan might be achieved by confining new reactors essentially to existing sites

  10. A survey of attitudes and acceptance of wastewater reuse in Iran: Shiraz City as a case study

    Directory of Open Access Journals (Sweden)

    Mohammad Ali Baghapour

    2017-12-01

    Full Text Available People's attitudes are a key issue in the use of reclaimed wastewater. Unfortunately, there is not enough research on the use of reclaimed wastewater in developing countries such as Iran. The present study aimed to investigate public acceptance and citizens' attitudes toward reclaimed wastewater in Shiraz, Iran. A two-part questionnaire, designed to collect demographic data and information about people's willingness to reuse wastewater, was distributed among 562 citizens of Shiraz. The results showed that most respondents knew nothing about the chemical quality (67.4% or microbiological quality (81.5% of the wastewater treatment plant effluent. The maximum acceptance of treated wastewater use was related to public consumption (87%, car washing (85% and flush tank (80%, respectively. The minimum acceptance was related to cooking and drinking (8%. Also, a significant correlation was observed between citizens' willingness to use reclaimed wastewater and variables such as level of education, gender, awareness of wastewater treatment process and awareness of quality of reclaimed wastewater. Shiraz citizens, like other people in the world, were less willing to use reclaimed wastewater for cooking, drinking, laundry and bathing, but their willingness was obviously greater in applications with less skin contact.

  11. Hanford Site solid waste acceptance criteria

    International Nuclear Information System (INIS)

    Ellefson, M.D.

    1998-01-01

    Order 5820.2A requires that each treatment, storage, and/or disposal facility (referred to in this document as TSD unit) that manages low-level or transuranic waste (including mixed waste and TSCA PCB waste) maintain waste acceptance criteria. These criteria must address the various requirements to operate the TSD unit in compliance with applicable safety and environmental requirements. This document sets forth the baseline criteria for acceptance of radioactive waste at TSD units operated by WMH. The criteria for each TSD unit have been established to ensure that waste accepted can be managed in a manner that is within the operating requirements of the unit, including environmental regulations, DOE Orders, permits, technical safety requirements, waste analysis plans, performance assessments, and other applicable requirements. Acceptance criteria apply to the following TSD units: the Low-Level Burial Grounds (LLBG) including both the nonregulated portions of the LLBG and trenches 31 and 34 of the 218-W-5 Burial Ground for mixed waste disposal; Central Waste Complex (CWC); Waste Receiving and Processing Facility (WRAP); and T Plant Complex. Waste from all generators, both from the Hanford Site and from offsite facilities, must comply with these criteria. Exceptions can be granted as provided in Section 1.6. Specific waste streams could have additional requirements based on the 1901 identified TSD pathway. These requirements are communicated in the Waste Specification Records (WSRds). The Hanford Site manages nonradioactive waste through direct shipments to offsite contractors. The waste acceptance requirements of the offsite TSD facility must be met for these nonradioactive wastes. This document does not address the acceptance requirements of these offsite facilities

  12. 1991 Acceptance priority ranking

    International Nuclear Information System (INIS)

    1991-12-01

    The Standard Contract for Disposal of Spent Nuclear Fuel and/or High- Level Radioactive Waste (10 CFR Part 961) that the Department of Energy (DOE) has executed with the owners and generators of civilian spent nuclear fuel requires annual publication of the Acceptance Priority Ranking (APR). The 1991 APR details the order in which DOE will allocate Federal waste acceptance capacity. As required by the Standard Contract, the ranking is based on the age of permanently discharged spent nuclear fuel (SNF), with the owners of the oldest SNF, on an industry-wide basis, given the highest priority. the 1991 APR will be the basis for the annual allocation of waste acceptance capacity to the Purchasers in the 1991 Annual Capacity Report (ACR), to be issued later this year. This document is based on SNF discharges as of December 31, 1990, and reflects Purchaser comments and corrections, as appropriate, to the draft APR issued on May 15, 1991

  13. Altering user' acceptance of automation through prior automation exposure.

    Science.gov (United States)

    Bekier, Marek; Molesworth, Brett R C

    2017-06-01

    Air navigation service providers worldwide see increased use of automation as one solution to overcome the capacity constraints imbedded in the present air traffic management (ATM) system. However, increased use of automation within any system is dependent on user acceptance. The present research sought to determine if the point at which an individual is no longer willing to accept or cooperate with automation can be manipulated. Forty participants underwent training on a computer-based air traffic control programme, followed by two ATM exercises (order counterbalanced), one with and one without the aid of automation. Results revealed after exposure to a task with automation assistance, user acceptance of high(er) levels of automation ('tipping point') decreased; suggesting it is indeed possible to alter automation acceptance. Practitioner Summary: This paper investigates whether the point at which a user of automation rejects automation (i.e. 'tipping point') is constant or can be manipulated. The results revealed after exposure to a task with automation assistance, user acceptance of high(er) levels of automation decreased; suggesting it is possible to alter automation acceptance.

  14. Suitability of the charm HVS and a microbiological multiplate system for detection of residues in raw milk at EU maximum residue levels

    NARCIS (Netherlands)

    Nouws, J.F.M.; Egmond, van H.; Loeffen, G.; Schouten, J.; Keukens, H.; Smulders, I.; Stegeman, H.

    1999-01-01

    In this paper we assessed the suitability of the Charm HVS and a newly developed microbiological multiplate system as post-screening tests to confirm the presence of residues in raw milk at or near the maximum permissible residue level (MRL). The multiplate system is composed of Bacillus

  15. An Alternative Derivation of the Energy Levels of the "Particle on a Ring" System

    Science.gov (United States)

    Vincent, Alan

    1996-10-01

    All acceptable wave functions must be continuous mathematical functions. This criterion limits the acceptable functions for a particle in a linear 1-dimensional box to sine functions. If, however, the linear box is bent round into a ring, acceptable wave functions are those which are continuous at the 'join'. On this model some acceptable linear functions become unacceptable for the ring and some unacceptable cosine functions become acceptable. This approach can be used to produce a straightforward derivation of the energy levels and wave functions of the particle on a ring. These simple wave mechanical systems can be used as models of linear and cyclic delocalised systems such as conjugated hydrocarbons or the benzene ring. The promotion energy of an electron can then be used to calculate the wavelength of absorption of uv light. The simple model gives results of the correct order of magnitude and shows that, as the chain length increases, the uv maximum moves to longer wavelengths, as found experimentally.

  16. Consumer acceptance of model soup system with varying levels of herbs and salt.

    Science.gov (United States)

    Wang, Chao; Lee, Youngsoo; Lee, Soo-Yeun

    2014-10-01

    Although herbs have been reported as one of the most common saltiness enhancers, few studies have focused on the effect of herbs on reducing added sodium as well as the impact of herbs on consumers' overall liking of foods. Therefore, the objectives of this study were to determine the effect of varying levels of herbs on reducing added sodium and consumers' overall liking of soups and identify the impact of salt levels on consumers' overall liking of soups. Overall liking of freshly prepared and retorted canned soups with varying levels of herbs was evaluated before and after adding salt by consumers ad libitum until the saltiness of the soup was just about right for them. The results of the study demonstrated that when the perceived herb flavor increased, the amount of salt consumers added to fresh soups decreased (P ≤ 0.006); however, consumers' overall liking decreased (P ≤ 0.013) as well for the highest level of herb tested in the study. Although overall liking of all canned soups was not significantly decreased by herbs, the amount of salt consumers added was also not significantly decreased when herbs were used. Overall liking of all soups significantly increased after more salt was added (P ≤ 0.001), which indicates that salt level was a dominant factor in affecting consumers' overall liking of soups with varying levels of herbs. These findings imply the role of herbs in decreasing salt intake, and the adequate amount of herbs to be added in soup systems. It is challenging for the food industry to reduce sodium in foods without fully understanding the impact of sodium reduction on sensory properties of foods. Herbs are recommended to use in reducing sodium; however, little has been reported regarding the effect of herbs on sodium reduction and how herbs influence consumers’ acceptance of foods. This study provides findings that herbs may aid in decreasing the amount of salt consumers need to add for freshly prepared soups. It was also found that high

  17. Quantile-based Bayesian maximum entropy approach for spatiotemporal modeling of ambient air quality levels.

    Science.gov (United States)

    Yu, Hwa-Lung; Wang, Chih-Hsin

    2013-02-05

    Understanding the daily changes in ambient air quality concentrations is important to the assessing human exposure and environmental health. However, the fine temporal scales (e.g., hourly) involved in this assessment often lead to high variability in air quality concentrations. This is because of the complex short-term physical and chemical mechanisms among the pollutants. Consequently, high heterogeneity is usually present in not only the averaged pollution levels, but also the intraday variance levels of the daily observations of ambient concentration across space and time. This characteristic decreases the estimation performance of common techniques. This study proposes a novel quantile-based Bayesian maximum entropy (QBME) method to account for the nonstationary and nonhomogeneous characteristics of ambient air pollution dynamics. The QBME method characterizes the spatiotemporal dependence among the ambient air quality levels based on their location-specific quantiles and accounts for spatiotemporal variations using a local weighted smoothing technique. The epistemic framework of the QBME method can allow researchers to further consider the uncertainty of space-time observations. This study presents the spatiotemporal modeling of daily CO and PM10 concentrations across Taiwan from 1998 to 2009 using the QBME method. Results show that the QBME method can effectively improve estimation accuracy in terms of lower mean absolute errors and standard deviations over space and time, especially for pollutants with strong nonhomogeneous variances across space. In addition, the epistemic framework can allow researchers to assimilate the site-specific secondary information where the observations are absent because of the common preferential sampling issues of environmental data. The proposed QBME method provides a practical and powerful framework for the spatiotemporal modeling of ambient pollutants.

  18. An automated land-use mapping comparison of the Bayesian maximum likelihood and linear discriminant analysis algorithms

    Science.gov (United States)

    Tom, C. H.; Miller, L. D.

    1984-01-01

    The Bayesian maximum likelihood parametric classifier has been tested against the data-based formulation designated 'linear discrimination analysis', using the 'GLIKE' decision and "CLASSIFY' classification algorithms in the Landsat Mapping System. Identical supervised training sets, USGS land use/land cover classes, and various combinations of Landsat image and ancilliary geodata variables, were used to compare the algorithms' thematic mapping accuracy on a single-date summer subscene, with a cellularized USGS land use map of the same time frame furnishing the ground truth reference. CLASSIFY, which accepts a priori class probabilities, is found to be more accurate than GLIKE, which assumes equal class occurrences, for all three mapping variable sets and both levels of detail. These results may be generalized to direct accuracy, time, cost, and flexibility advantages of linear discriminant analysis over Bayesian methods.

  19. Evaluating the User Acceptance Level of a Novel Tree-Based Approach on Moddeling Medical Research Data

    Directory of Open Access Journals (Sweden)

    Péter OLÁH

    2016-12-01

    Full Text Available Modern medical research needs specialized Information Systems that can store and process large amounts of complex scientific data, while providing the medical researcher with a high degree of flexibility regarding the design of the data structure. In our previous work we have proposed an architecture for such a system based on trees and multitrees, stored in a relational database. In this paper we present the tools that we have used to assess the user acceptance level of this system along with the results of this evaluation. Our findings have validated the benefits of the proposed system and helped us identify some relevant aspects that need further improvement.

  20. Acceptance of illness and satisfaction with life among malaria patients in rivers state, Nigeria.

    Science.gov (United States)

    Van Damme-Ostapowicz, Katarzyna; Krajewska-Kułak, Elżbieta; Nwosu, Paul J C; Kułak, Wojciech; Sobolewski, Marek; Olszański, Romuald

    2014-05-03

    Health condition is one of the basic factors affecting satisfaction with life, and the level of illness acceptance. The purpose of the study was to analyse the level of illness acceptance, the level of satisfaction with life among malaria patients, and the level of trust placed in the physician and the nurse. The study employs the method of diagnostic survey based on standardised AIS and SWLS scales, as well as Anderson and Dedrick's PPTS and PNTS scales. The average AIS level was 12 points, while the average level of SwL at the SWLS scale was 16.5 points. The average level of trust in the physician and the nurse amounted to 50.6 points and 51.4 points, respectively. The correlation between the level of illness acceptance and self-evaluated satisfaction with life was statistically significant, with R = 0.56. The marital status influenced the level of illness acceptance with p satisfaction with life with p employment status affected the level of satisfaction with life with p satisfaction with life was low. The majority of respondents trusted their physician and nurse. There is a statistically significant correlation between the level of illness acceptance and the self-evaluated satisfaction with life. The marital status had a statistically significant effect on the acceptance of illness and the satisfaction with life. The individuals who had a job demonstrated higher levels of quality of life and illness acceptance.

  1. Food irradiation receives international acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Beddoes, J M [Atomic Energy of Canada Ltd., Ottawa, Ontario. Commercial Products

    1982-04-01

    Irradiation has advantages as a method of preserving food, especially in the Third World. The author tabulates some examples of actual use of food irradiation with dates and tonnages, and tells the story of the gradual acceptance of food irradiation by the World Health Organization, other international bodies, and the U.S. Food and Drug Administration (USFDA). At present, the joint IAEA/FAO/WHO standard permits an energy level of up to 5 MeV for gamma rays, well above the 1.3 MeV energy level of /sup 60/Co. The USFDA permits irradiation of any food up to 10 krad, and minor constituents of a diet may be irradiated up to 5 Mrad. The final hurdle to be cleared, that of economic acceptance, depends on convincing the food processing industry that the process is technically and economically efficient.

  2. Food irradiation receives international acceptance

    International Nuclear Information System (INIS)

    Beddoes, J.M.

    1982-01-01

    Irradition has advantages as a method of preserving food, especially in the Third World. The author tabulates some examples of actual use of food irradiation with dates and tonnages, and tells the story of the gradual acceptance of food irradiation by the World Health Organization, other international bodies, and the U.S. Food and Drug Administration (USFDA). At present, the joint IAEA/FAO/WHO standard permits an energy level of up to 5 MeV for gamma rays, well above the 1.3 MeV energy level of 60 Co. The USFDA permits irradiation of any food up to 10 krad, and minor constituents of a diet may be irradiated up to 5 Mrad. The final hurdle to be cleared, that of economic acceptance, depends on convincing the food processing industry that the process is technically and economically efficient

  3. People's willingness to accept overdetection in cancer screening: population survey.

    Science.gov (United States)

    Van den Bruel, Ann; Jones, Caroline; Yang, Yaling; Oke, Jason; Hewitson, Paul

    2015-03-03

    To describe the level of overdetection people would find acceptable in screening for breast, prostate, and bowel cancer and whether acceptability is influenced by the magnitude of the benefit from screening and the cancer specific harms from overdetection. Online survey. Women were presented with scenarios on breast and bowel cancer, men with scenarios on prostate and bowel cancer. For each particular cancer, we presented epidemiological information and described the treatment and its consequences. Secondly, we presented two different scenarios of benefit: one indicating a 10% reduction in cancer specific mortality and the second indicating a 50% reduction. Online survey of the population in the United Kingdom. Respondents were part of an existing panel of people who volunteer for online research and were invited by email or online marketing. We recruited 1000 respondents, representative for age and sex for the UK population. Number of cases of overdetection people were willing to accept, ranging from 0-1000 (complete screened population) for each cancer modality and each scenario of benefit. There was large variability between respondents in the level of overdetection they would find acceptable, with medians ranging from 113 to 313 cases of overdetection per 1000 people screened. Across all scenarios, 4-7% of respondents indicated they would accept no overdetection at all compared with 7-14% who thought that it would be acceptable for the entire screened population to be overdetected. Acceptability in screening for bowel cancer was significantly lower than for breast and prostate cancer. People aged 50 or over accepted significantly less overdetection, whereas people with higher education levels accepted more; 29% of respondents had heard of overdetection before. Acceptability of overdetection in cancer screening is variable. Invitations for screening should include clear information on the likelihood and consequences of overdetection to allow people to make an

  4. Inspection Program Development for an Aircraft Fleet and an Airline on the Basis of the Acceptance Fatigue Test Result

    Directory of Open Access Journals (Sweden)

    Paramonov Yuri

    2015-02-01

    Full Text Available An inspection interval planning is considered in order to limit the probability of any fatigue failure (FFP in a fleet of N aircraft (AC and to provide an economical effectiveness of airline (AL under the limitation of fatigue failure rate (FFR. A solution of these two problems is based on the processing of the result of acceptance fatigue test of a new type of aircraft. During this test an estimate of the parameter ϴ, of a fatigue crack growth trajectory has been obtained. If the result of this acceptance test is too bad then this new type of aircraft will not be used in service. A redesign of this project should be done. If the result the acceptance test is pretty good then the reliability of the aircraft fleet and the airline will be provided without inspections. For this strategy there is a maximum of FFP (a maximum of FFR as a function of an unknown parameter ᶿ. This maximum can be limited by the use of the offered here procedure of the choice of the inspection number. The economic effectiveness of the AL operation is considered using the theory of Markov process with rewords.

  5. Acceptance of sugar reduction in flavored yogurt.

    Science.gov (United States)

    Chollet, M; Gille, D; Schmid, A; Walther, B; Piccinali, P

    2013-09-01

    To investigate what level of sugar reduction is accepted in flavored yogurt, we conducted a hedonic test focusing on the degree of liking of the products and on optimal sweetness and aroma levels. For both flavorings (strawberry and coffee), consumers preferred yogurt containing 10% added sugar. However, yogurt containing 7% added sugar was also acceptable. On the just-about-right scale, yogurt containing 10% sugar was more often described as too sweet compared with yogurt containing 7% sugar. On the other hand, the sweetness and aroma intensity for yogurt containing 5% sugar was judged as too low. A second test was conducted to determine the effect of flavoring concentration on the acceptance of yogurt containing 7% sugar. Yogurts containing the highest concentrations of flavoring (11% strawberry, 0.75% coffee) were less appreciated. Additionally, the largest percentage of consumers perceived these yogurts as "not sweet enough." These results indicate that consumers would accept flavored yogurts with 7% added sugar instead of 10%, but 5% sugar would be too low. Additionally, an increase in flavor concentration is undesirable for yogurt containing 7% added sugar. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  6. Nevada National Security Site Waste Acceptance Criteria

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-06-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept the following: • DOE hazardous and non-hazardous non-radioactive classified waste • DOE low-level radioactive waste (LLW) • DOE mixed low-level waste (MLLW) • U.S. Department of Defense (DOD) classified waste The LLW and MLLW listed above may also be classified waste. Classified waste is the only waste accepted for disposal that may be non-radioactive and shall be required to meet the waste acceptance criteria for radioactive waste as specified in this document. Classified waste may be sent to the NNSS as classified matter. Section 3.1.18 provides the requirements that must be met for permanent burial of classified matter. The NNSA/NFO and support contractors are available to assist the generator in understanding or interpreting this document. For assistance, please call the NNSA/NFO Environmental Management Operations (EMO) at (702) 295-7063, and the call will be directed to the appropriate contact.

  7. Nevada National Security Site Waste Acceptance Criteria

    International Nuclear Information System (INIS)

    2013-01-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept the following: DOE hazardous and non-hazardous non-radioactive classified waste; DOE low-level radioactive waste (LLW); DOE mixed low-level waste (MLLW); and, U.S. Department of Defense (DOD) classified waste. The LLW and MLLW listed above may also be classified waste. Classified waste is the only waste accepted for disposal that may be non-radioactive and shall be required to meet the waste acceptance criteria for radioactive waste as specified in this document. Classified waste may be sent to the NNSS as classified matter. Section 3.1.18 provides the requirements that must be met for permanent burial of classified matter. The NNSA/NFO and support contractors are available to assist the generator in understanding or interpreting this document. For assistance, please call the NNSA/NFO Environmental Management Operations (EMO) at (702) 295-7063, and the call will be directed to the appropriate contact.

  8. Ideal Standards, Acceptance, and Relationship Satisfaction: Latitudes of Differential Effects

    Directory of Open Access Journals (Sweden)

    Asuman Buyukcan-Tetik

    2017-09-01

    Full Text Available We examined whether the relations of consistency between ideal standards and perceptions of a current romantic partner with partner acceptance and relationship satisfaction level off, or decelerate, above a threshold. We tested our hypothesis using a 3-year longitudinal data set collected from heterosexual newlywed couples. We used two indicators of consistency: pattern correspondence (within-person correlation between ideal standards and perceived partner ratings and mean-level match (difference between ideal standards score and perceived partner score. Our results revealed that pattern correspondence had no relation with partner acceptance, but a positive linear/exponential association with relationship satisfaction. Mean-level match had a significant positive association with actor’s acceptance and relationship satisfaction up to the point where perceived partner score equaled ideal standards score. Partner effects did not show a consistent pattern. The results suggest that the consistency between ideal standards and perceived partner attributes has a non-linear association with acceptance and relationship satisfaction, although the results were more conclusive for mean-level match.

  9. Self-acceptance of stuttering: A preliminary study.

    Science.gov (United States)

    De Nardo, Thales; Gabel, Rodney M; Tetnowski, John A; Swartz, Eric R

    2016-01-01

    This study explored the relationship between self-acceptance of stuttering and (1) psychosocial factors (self-esteem, hostility towards others, emotional support, and perceived discrimination); (2) treatment history (support group participation, therapy duration, and perceived therapy success); and (3) previously reported variables in self-acceptance of stuttering, which include age and stuttering severity. Participants were 80 adults who stutter who were recruited with assistance from the National Stuttering Association and Board Certified Specialists in Fluency Disorders. Participants completed an electronic survey composed of an acceptance of stuttering scale, psychosocial scales, and a participant information questionnaire. Statistical analysis identified significant correlations between participants' reports of self-acceptance of stuttering and self-esteem, perceived discrimination, hostility towards others, and perceived therapy outcome. Self-esteem was positively correlated with self-acceptance, while hostility towards others and perceived discrimination was negatively correlated with self-acceptance. Participants who perceived their therapy outcome to be successful were significantly more likely to report higher levels of self-acceptance. No significant relationships were found between self-acceptance of stuttering and support group participation, emotional support, stuttering severity, and participant age. This exploratory investigation has provided a foundation for future studies on the self-acceptance of stuttering. The findings indicate common psychosocial variables in self-acceptance of stuttering and of other disabilities. The significant relationships between self-acceptance of stuttering and psychosocial and therapeutic variables found need to be further explored to identify its causalities and clinical implications. The reader will be able to (1) discuss the importance of assessing self-acceptance of stuttering, (2) summarize the literature on self-acceptance

  10. Acceptability of a theory of planned behaviour email-based nutrition intervention.

    Science.gov (United States)

    Kothe, E J; Mullan, B A

    2014-03-01

    This study investigated feasibility and acceptability of a new email-delivered intervention promoting fruit and vegetable consumption in a university-based population of Australian young adults. The study explored whether there are differences in the reported feasibility and acceptability between demographic groups within the population of interest and at three levels of intervention intensity. The email-delivered intervention program consists of an implementation intention 'planning task' and between 3 and 15 short email messages over a 15-day study period. The intervention program was developed using the Theory of Planned Behaviour and was designed to modify perceived behavioural control. One hundred and ten participants (mean age = 19.21 years, 25.6% male) completed the feasibility and acceptability questionnaire at Day 15. This questionnaire contained items about all intervention components. High acceptability and feasibility scores were found for all intervention parts and at all levels of intervention intensity. There were few significant differences in the reported acceptability of items between key demographic sub-groups, and no differences in reported acceptability at different levels of intervention intensity. These results suggest that this email-delivered intervention is an acceptable and feasible tool for promoting fruit and vegetable consumption for participants in the target population.

  11. Nevada Test Site Waste Acceptance Criteria, December 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-12-01

    This document establishes the US Department of Energy, Nevada Operations Office waste acceptance criteria. The waste acceptance criteria provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive waste and mixed waste for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the Nevada Test Site Area 3 and Area 5 Radioactive Waste Management Sites for storage or disposal.

  12. Nevada Test Site Waste Acceptance Criteria, December 2000

    International Nuclear Information System (INIS)

    2000-01-01

    This document establishes the US Department of Energy, Nevada Operations Office waste acceptance criteria. The waste acceptance criteria provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive waste and mixed waste for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the Nevada Test Site Area 3 and Area 5 Radioactive Waste Management Sites for storage or disposal

  13. Maximum vehicle cabin temperatures under different meteorological conditions

    Science.gov (United States)

    Grundstein, Andrew; Meentemeyer, Vernon; Dowd, John

    2009-05-01

    A variety of studies have documented the dangerously high temperatures that may occur within the passenger compartment (cabin) of cars under clear sky conditions, even at relatively low ambient air temperatures. Our study, however, is the first to examine cabin temperatures under variable weather conditions. It uses a unique maximum vehicle cabin temperature dataset in conjunction with directly comparable ambient air temperature, solar radiation, and cloud cover data collected from April through August 2007 in Athens, GA. Maximum cabin temperatures, ranging from 41-76°C, varied considerably depending on the weather conditions and the time of year. Clear days had the highest cabin temperatures, with average values of 68°C in the summer and 61°C in the spring. Cloudy days in both the spring and summer were on average approximately 10°C cooler. Our findings indicate that even on cloudy days with lower ambient air temperatures, vehicle cabin temperatures may reach deadly levels. Additionally, two predictive models of maximum daily vehicle cabin temperatures were developed using commonly available meteorological data. One model uses maximum ambient air temperature and average daily solar radiation while the other uses cloud cover percentage as a surrogate for solar radiation. From these models, two maximum vehicle cabin temperature indices were developed to assess the level of danger. The models and indices may be useful for forecasting hazardous conditions, promoting public awareness, and to estimate past cabin temperatures for use in forensic analyses.

  14. Awareness and Knowledge Levels of Turkish College Students about Human Papilloma Virus Infection and Vaccine Acceptance.

    Science.gov (United States)

    Oz, Murat; Cetinkaya, Nilufer; Apaydin, Aysen; Korkmaz, Elmas; Bas, Sevda; Ozgu, Emre; Gungor, Tayfun

    2018-04-01

    Awareness of HPV by the target population is an important determinant of vaccine acceptance. The aim of this study is to evaluate the awareness of HPV infection and acceptability of the HPV vaccines among Turkish college students. College students aged 18-30 who were attending a large public university in Ankara participated in this study. The participants were asked to complete a questionnaire to elicit demographic characteristics, awareness level of HPV and HPV vaccine, and willingness to be vaccinated. One thousand one hundred sixty students responded to the invitation email and completed the questionnaire. The mean scores of female students about HPV and HPV vaccine were 7.1/15 and 3.6/9, respectively, while these scores were 7.9/15 and 3.4/9 among male students, respectively. While 51 % percent of female and 33.5 % of male students had heard of HPV and 32.8 % and 18 % of them had heard of HPV vaccine, respectively, only 1.5 % of female and 0.4 % of male students had been vaccinated against HPV. A total of 507 students (43.7 %) had previously heard of HPV. Only 309 (26.6 %) of the participants had previously heard of the HPV vaccine, and 45.1 % of the students were willing to receive HPV vaccination. The main predictors for willingness to be vaccinated were the following: sexual experience, sexual behavior, past history of sexually transmitted infection (STI), and knowledge about HPV and HPV vaccine. Higher awareness levels of HPV and HPV vaccine are significantly related to greater willingness to be vaccinated, and the main reasons for rejecting the vaccine were insufficient information about the vaccine and possible unknown side effects.

  15. Bridging the Gap between Social Acceptance and Ethical Acceptability.

    Science.gov (United States)

    Taebi, Behnam

    2017-10-01

    New technology brings great benefits, but it can also create new and significant risks. When evaluating those risks in policymaking, there is a tendency to focus on social acceptance. By solely focusing on social acceptance, we could, however, overlook important ethical aspects of technological risk, particularly when we evaluate technologies with transnational and intergenerational risks. I argue that good governance of risky technology requires analyzing both social acceptance and ethical acceptability. Conceptually, these two notions are mostly complementary. Social acceptance studies are not capable of sufficiently capturing all the morally relevant features of risky technologies; ethical analyses do not typically include stakeholders' opinions, and they therefore lack the relevant empirical input for a thorough ethical evaluation. Only when carried out in conjunction are these two types of analysis relevant to national and international governance of risky technology. I discuss the Rawlsian wide reflective equilibrium as a method for marrying social acceptance and ethical acceptability. Although the rationale of my argument is broadly applicable, I will examine the case of multinational nuclear waste repositories in particular. This example will show how ethical issues may be overlooked if we focus only on social acceptance, and will provide a test case for demonstrating how the wide reflective equilibrium can help to bridge the proverbial acceptance-acceptability gap. © 2016 The Authors Risk Analysis published by Wiley Periodicals, Inc. on behalf of Society for Risk Analysis.

  16. Monitoring programme on nitrates in vegetables and vegetable-based baby foods marketed in the Region of Valencia, Spain: levels and estimated daily intake.

    Science.gov (United States)

    Pardo-Marín, O; Yusà-Pelechà, V; Villalba-Martín, P; Perez-Dasí, J A

    2010-04-01

    This study was carried out to determine the current levels of nitrates in vegetables and vegetable-based baby foods (a total of 1150 samples) marketed in the Region of Valencia, Spain, over the period 2000-2008, and to estimate the toxicological risk associated with their intake. Average (median) levels of nitrate in lettuce, iceberg-type lettuce and spinach (1156, 798 and 1410 mg kg(-1) w/w, respectively) were lower than the maximum limits established by European Union legislation. Thirteen fresh spinach samples exceeded the regulatory limits. Median nitrate values in other vegetables for which a maximum limit has not been fixed by the European Commission were 196, 203, 1597, 96, 4474 and 2572 mg kg(-1) w/w (for potato, carrot, chard, artichoke, rucola and lamb's lettuce, respectively). The estimated nitrate daily intakes through vegetables consumption for adult, extreme consumers and children were found to be about 29%, 79.8% and 15.1%, respectively, of the acceptable daily intake (3.7 mg kg(-1)). The levels (median = 60.4 mg kg(-1) w/w) found in vegetable-based baby foods were, in all cases, lower the maximum level proposed by European Union legislation. The estimated nitrate daily intake through baby foods for infants between 0-1 and 1-2 years of age were 13% and 18%, respectively, of the acceptable daily intake.

  17. Guidance document on the derivation of maximum permissible risk levels for human intake of soil contaminants

    NARCIS (Netherlands)

    Janssen PJCM; Speijers GJA; CSR

    1997-01-01

    This report contains a basic step-to-step description of the procedure followed in the derivation of the human-toxicological Maximum Permissible Risk (MPR ; in Dutch: Maximum Toelaatbaar Risico, MTR) for soil contaminants. In recent years this method has been applied for a large number of compounds

  18. Determining Maximum Photovoltaic Penetration in a Distribution Grid considering Grid Operation Limits

    DEFF Research Database (Denmark)

    Kordheili, Reza Ahmadi; Bak-Jensen, Birgitte; Pillai, Jayakrishnan Radhakrishna

    2014-01-01

    High penetration of photovoltaic panels in distribution grid can bring the grid to its operation limits. The main focus of the paper is to determine maximum photovoltaic penetration level in the grid. Three main criteria were investigated for determining maximum penetration level of PV panels...... for this grid: even distribution of PV panels, aggregation of panels at the beginning of each feeder, and aggregation of panels at the end of each feeder. Load modeling is done using Velander formula. Since PV generation is highest in the summer due to irradiation, a summer day was chosen to determine maximum......; maximum voltage deviation of customers, cables current limits, and transformer nominal value. Voltage deviation of different buses was investigated for different penetration levels. The proposed model was simulated on a Danish distribution grid. Three different PV location scenarios were investigated...

  19. Public acceptance of nuclear power among Malaysian students

    Science.gov (United States)

    Muhamad Pauzi, Anas; Saad, Juniza Md; Arif Abu Bakar, Asyraf; Hannan Damahuri, Abdul; Syukri, Nur Syamim Mohd

    2018-01-01

    Malaysian government’s aim to include nuclear energy for electricity generation has triggered various reactions from all especially the public. The objective of this study is to have a better understanding on the knowledge, sources of information of nuclear power and sources of energy chosen by Malaysian in 20 years’ time. Besides that, we want to examine the level of acceptance and perception of Malaysian towards nuclear energy and we want to identify the correlation between public perceptions with the acceptance towards nuclear power in Malaysia, and also to study the differences between perception and acceptance of nuclear power with gender and educational level. For this research methodology, the research questions are given orally or through paper-pencil and also social networking site such as Facebook or through electronic media application such as WhatsApp and Google docs. The data were analysed using a SPSS version 22.0 (Statistical Package for the Social Sciences). Results showed that more than 50% of the respondents have the knowledge of nuclear energy. A part of from that, only 39 % are confident government can afford to build NPP in Malaysia and 41 % disagree nuclear energy is the best option for future energy. From analysis using SPSS 22 we estimate negative perception will give a negative acceptance in term of support towards the use of nuclear energy in power generation in Malaysia. There are also slight correlation that the higher the level of education of Malaysian, the more negative the perception of Malaysian in accepting nuclear energy as source of power in Malaysia. Therefore in shaping a positive acceptance of NPP in Malaysia, the authorities need to educate the people with the knowledge of nuclear in order to overcome the negative perception towards nuclear power.

  20. Nuclear Energy and Public Acceptance

    International Nuclear Information System (INIS)

    Daifuku, K.

    2002-01-01

    The continued use of nuclear power in the European Union and elsewhere requires an adequate level of public and political acceptance. A lack of acceptance is often mistakenly cited as a reason for the slowdown in nuclear power plant construction in Western Europe and as a justification for abandoning nuclear power. In fact, the reasons for the slowdown have more to do with the following two factors: Plentiful supplies of low-priced natural gas, making gas-fired power plants a more attractive investment choice; more than adequate supplies of electricity which have curbed the need for the construction of new plant of any kind. In general, moves towards a withdrawal from nuclear in certain Community countries have been due to party political pressures and have not been a response to public opposition to nuclear. In addition, opinion polls do not show widespread public opposition to the use of nuclear power. Figures consistently indicate that the use of nuclear power does not come high on the list of most people's main worries. Their main concerns focus on other issues such as crime and financial problems. In the main, electricity is taken for granted in the industrialised world. Electric power only becomes an issue when there is a threat of shortages. So if public acceptance is not the main obstacle, what is? Political acceptance is an integral part of the process in which nuclear becomes acceptable or not. The relationship between public and political acceptance and the role of the industry in this context, on how to foster a better trialogue, will be examined. (author)

  1. 105K West Isolation Barrier Acceptance Test results

    International Nuclear Information System (INIS)

    McCracken, K.J.; Irwin, J.J.

    1995-01-01

    The objective of this document is to report and interpret the findings of the isolation barrier acceptance tests performed in 105KW/100K. The tests were performed in accordance with the test plan and acceptance test procedure. The test report contains the test data. This document compares the test data against the criteria. A discussion of the leak rate analytical characterization describes how the flow characteristics flow rate will be determined using the test data from the test report. Two modes of water loss were considered; basin and/or discharge chute leakage, and evaporation. An initial test established baseline leakage data and instrumentation performance. Test 2 evaluated the sealing performance of the isolation barrier by inducing an 11 in. (27.9 cm) level differential across the barrier. The leak rate at this 11 in. (27.9 cm) level is extrapolated to the 16 ft. (4.9 m) level differential postulated in the DBE post seismic event. If the leak rate, adjusted for evaporation and basin leakage (determined from Test 1), is less than the SAR limit of 1,500 gph (5,680 lph) at a 16 ft (4.9 m) level differential, the barriers pass the acceptance test

  2. Impact of a proposed revision of the IESTI equation on the acute risk assessment conducted when setting maximum residue levels (MRLs) in the European Union (EU): A case study.

    Science.gov (United States)

    Breysse, Nicolas; Vial, Gaelle; Pattingre, Lauriane; Ossendorp, Bernadette C; Mahieu, Karin; Reich, Hermine; Rietveld, Anton; Sieke, Christian; van der Velde-Koerts, Trijntje; Sarda, Xavier

    2018-06-03

    Proposals to update the methodology for the international estimated short-term intake (IESTI) equations were made during an international workshop held in Geneva in 2015. Changes to several parameters of the current four IESTI equations (cases 1, 2a, 2b, and 3) were proposed. In this study, the overall impact of these proposed changes on estimates of short-term exposure was studied using the large portion data available in the European Food Safety Authority PRIMo model and the residue data submitted in the framework of the European Maximum Residue Levels (MRL) review under Article 12 of Regulation (EC) No 396/2005. Evaluation of consumer exposure using the current and proposed equations resulted in substantial differences in the exposure estimates; however, there were no significant changes regarding the number of accepted MRLs. For the different IESTI cases, the median ratio of the new versus the current equation is 1.1 for case 1, 1.4 for case 2a, 0.75 for case 2b, and 1 for case 3. The impact, expressed as a shift in the IESTI distribution profile, indicated that the 95th percentile IESTI shifted from 50% of the acute reference dose (ARfD) with the current equations to 65% of the ARfD with the proposed equations. This IESTI increase resulted in the loss of 1.2% of the MRLs (37 out of 3110) tested within this study. At the same time, the proposed equations would have allowed 0.4% of the MRLs (14 out of 3110) that were rejected with the current equations to be accepted. The commodity groups that were most impacted by these modifications are solanacea (e.g., potato, eggplant), lettuces, pulses (dry), leafy brassica (e.g., kale, Chinese cabbage), and pome fruits. The active substances that were most affected were fluazifop-p-butyl, deltamethrin, and lambda-cyhalothrin.

  3. Probabilistic maximum-value wind prediction for offshore environments

    DEFF Research Database (Denmark)

    Staid, Andrea; Pinson, Pierre; Guikema, Seth D.

    2015-01-01

    statistical models to predict the full distribution of the maximum-value wind speeds in a 3 h interval. We take a detailed look at the performance of linear models, generalized additive models and multivariate adaptive regression splines models using meteorological covariates such as gust speed, wind speed......, convective available potential energy, Charnock, mean sea-level pressure and temperature, as given by the European Center for Medium-Range Weather Forecasts forecasts. The models are trained to predict the mean value of maximum wind speed, and the residuals from training the models are used to develop...... the full probabilistic distribution of maximum wind speed. Knowledge of the maximum wind speed for an offshore location within a given period can inform decision-making regarding turbine operations, planned maintenance operations and power grid scheduling in order to improve safety and reliability...

  4. Consumer detection and acceptability of reduced-sodium bread.

    Science.gov (United States)

    La Croix, Kimberly W; Fiala, Steven C; Colonna, Ann E; Durham, Catherine A; Morrissey, Michael T; Drum, Danna K; Kohn, Melvin A

    2015-06-01

    Bread is the largest contributor of Na to the American diet and excess Na consumption contributes to premature death and disability. We sought to determine the Na level at which consumers could detect a difference between reduced-Na bread and bread with typical Na content, and to determine if consumer sensory acceptability and purchase intent differed between reduced-Na bread and bread with typical Na content. Difference testing measured ability to detect differences in control bread and reduced-Na bread using two-alternative forced choice testing. Acceptability was measured using a nine-point hedonic scale and purchase intent was measured using a five-point purchase intent scale. Difference and acceptability testing were conducted in Portland, OR, USA in January 2013. Eighty-two consumers participated in difference testing and 109 consumers participated in acceptability testing. Consumers did not detect a difference in saltiness between the control bread and the 10 % reduced-Na bread, but did detect a difference between the control bread and bread reduced in Na content by 20 % and 30 %. Na reductions had no effect on consumer acceptability of sensory characteristics, including overall liking, appearance, aroma, flavour, sweetness, salt level and texture, or purchase intent. Reducing Na levels by up to 30 % in the sandwich bread tested did not affect consumer liking or purchase intent of the product. These results support national recommendations for small, incremental Na reductions in the food supply over time and assure bread manufacturers that sensory characteristics and consumer purchase intent of their products will be preserved after Na reductions occur.

  5. Acceptability and Difficulty of the STEM Track Implementation in Senior High School

    Directory of Open Access Journals (Sweden)

    Aldrin John Jao Estonanto

    2017-05-01

    Full Text Available The Department of Education in the Philippines implemented the Enhanced Basic Education Curriculum in 2013 which led to the creation of Senior High School Program. Studies showed the importance of the support of stakeholders to the success of an educational reform. Thus, it is significant to consider the acceptance of the new curriculum. This descriptive- correlational study sought to determine the acceptability of the Senior High School STEM program and correlate it to the difficulty level of problems along its implementation. Findings showed that there was low acceptability of the new curriculum among stakeholders. It also revealed that the major problems along the implementation of the curriculum were on the areas of Facility and Instructional Materials, and that the difficulty level of the problems was high. Finally, it was found out that there was significant inverse correlation between the curriculum’s acceptability level and the problems’ difficulty level. Thus, the study concludes that the acceptability level of curriculum is significantly related to the difficulty level of the problems encountered by the school along its implementation. The researcher recommends that a series of informationdissemination programs be conducted to raise awareness on the significance of the STEM Curriculum among the stakeholders of the school. Interventions were also proposed to address the problems

  6. The consequences of a reduction in the administratively applied maximum annual dose equivalent level for an individual in a group of occupationally exposed workers

    International Nuclear Information System (INIS)

    Harrison, N.T.

    1980-02-01

    An analysis is described for predicting the consequences of a reduction in the administratively applied maximum dose equivalent level to individuals in a group of workers occupationally exposed to ionising radiations, for the situation in which no changes are made to the working environment. This limitation of the maximum individual dose equivalent is accommodated by allowing the number of individuals in the working group to increase. The derivation of the analysis is given, together with worked examples, which highlight the important assumptions that have been made and the conclusions that can be drawn. The results are obtained in the form of the capacity of the particular working environment to accommodate the limitation of the maximum individual dose equivalent, the increase in the number of workers required to carry out the productive work and any consequent increase in the occupational collective dose equivalent. (author)

  7. Acceptance noise level: effects of the speech signal, babble, and listener language.

    Science.gov (United States)

    Shi, Lu-Feng; Azcona, Gabrielly; Buten, Lupe

    2015-04-01

    The acceptable noise level (ANL) measure has gained much research/clinical interest in recent years. The present study examined how the characteristics of the speech signal and the babble used in the measure may affect the ANL in listeners with different native languages. Fifteen English monolingual, 16 Russian-English bilingual, and 24 Spanish-English bilingual listeners participated. The ANL was obtained in eight conditions varying in the language of the signal (English and Spanish), language of the babble (English and Spanish), and number of talkers in the babble (4 and 12). Test conditions were randomized across listeners. The ANL for each condition was based on a minimum of two trials. Russian-English bilinguals yielded higher ANLs than other listeners; the intergroup difference of 4-5 dB was statistically and clinically significant. Spanish signals yielded significantly higher ANLs than English signals, but this difference of 0.5 dB was clinically negligible. The language and composition of the babble had a significant effect on Russian-English bilinguals, who yielded higher ANLs with the Spanish than English 12-talker babble. The above findings do not fully support the notion that the ANL is language- and population-independent. Clinicians should be aware of possible effects on ANL measures due to listeners' linguistic/cultural background.

  8. Feasibility and acceptability of workers' health surveillance for fire fighters.

    Science.gov (United States)

    Plat, Marie-Christine J; Frings-Dresen, Monique Hw; Sluiter, Judith K

    2011-09-01

    The objective of this study was to test the feasibility and acceptability of a new workers' health surveillance (WHS) for fire fighters in a Dutch pilot-implementation project. In three fire departments, between November 2007 and February 2009, feasibility was tested with respect to i) worker intent to change health and behavior; ii) the quality of instructions for testing teams; iii) the planned procedure in the field; and iv) future WHS organisation. Acceptability involved i) satisfaction with WHS and ii) verification of the job-specificity of the content of two physical tests of WHS. Fire fighters were surveyed after completing WHS, three testing teams were interviewed, and the content of the two tests was studied by experts. nearly all of the 275 fire fighters intended to improve their health when recommended by the occupational physician. The testing teams found the instructions to be clear, and they were mostly positive about the organisation of WHS. Acceptability: the fire fighters rated WHS at eight points (out of a maximum of ten). The experts also reached a consensus about the optimal job-specific content of the future functional physical tests. Overall, it is feasible and acceptable to implement WHS in a definitive form in the Dutch fire-fighting sector.

  9. Approximate maximum parsimony and ancestral maximum likelihood.

    Science.gov (United States)

    Alon, Noga; Chor, Benny; Pardi, Fabio; Rapoport, Anat

    2010-01-01

    We explore the maximum parsimony (MP) and ancestral maximum likelihood (AML) criteria in phylogenetic tree reconstruction. Both problems are NP-hard, so we seek approximate solutions. We formulate the two problems as Steiner tree problems under appropriate distances. The gist of our approach is the succinct characterization of Steiner trees for a small number of leaves for the two distances. This enables the use of known Steiner tree approximation algorithms. The approach leads to a 16/9 approximation ratio for AML and asymptotically to a 1.55 approximation ratio for MP.

  10. Identification of permit and waste acceptance criteria provisions requiring modification for acceptance of commercial mixed waste

    International Nuclear Information System (INIS)

    1994-03-01

    In October 1990, representatives of States and compact regions requested that the US Department of Energy (DOE) explore an agreement with host States and compact regions under which DOE would accept commercial mixed low-level radioactive waste (LLW) at DOE's own treatment and disposal facilities. A program for DOE management of commercial mixed waste is made potentially more attractive in light of the low commercial mixed waste volumes, high regulatory burdens, public opposition to new disposal sites, and relatively high cost of constructing commercial disposal facilities. Several studies were identified as essential in determining the feasibility of DOE accepting commercial mixed waste for disposal. The purpose of this report is to identify any current or proposed waste acceptance criteria (WAC) or Resource Conservation and Recovery Act (RCRA) provisions that would have to be modified for commercial mixed waste acceptance at specified DOE facilities. Following the introduction, Section 2 of this report (a) provides a background summary of existing and proposed mixed waste disposal facilities at each DOE site, and (b) summarizes the status of any RCRA Part B permit and WAC provisions relating to the disposal of mixed waste, including provisions relating to acceptance of offsite waste. Section 3 provides overall conclusions regarding the current status and permit modifications that must be implemented in order to grant DOE sites authority under their permits to accept commercial mixed waste for disposal. Section 4 contains a list of references

  11. User Acceptance of Computerized Cognitive Behavioral Therapy for Depression: Systematic Review.

    Science.gov (United States)

    Rost, Theresia; Stein, Janine; Löbner, Margrit; Kersting, Anette; Luck-Sikorski, Claudia; Riedel-Heller, Steffi G

    2017-09-13

    Computerized cognitive behavioral therapy (cCBT) has been proven to be effective in depression care. Moreover, cCBT packages are becoming increasingly popular. A central aspect concerning the take-up and success of any treatment is its user acceptance. The aim of this study was to update and expand on earlier work on user acceptance of cCBT for depression. This paper systematically reviewed quantitative and qualitative studies regarding the user acceptance of cCBT for depression. The initial search was conducted in January 2016 and involved the following databases: Web of Science, PubMed, the Cochrane Library, and PsycINFO. Studies were retained if they described the explicit examination of the user acceptance, experiences, or satisfaction related to a cCBT intervention, if they reported depression as a primary outcome, and if they were published in German or English from July 2007 onward. A total of 1736 studies were identified, of which 29 studies were eligible for review. User acceptance was operationalized and analyzed very heterogeneously. Eight studies reported a very high level of acceptance, 17 indicated a high level of acceptance, and one study showed a moderate level of acceptance. Two qualitative studies considered the positive and negative aspects concerning the user acceptance of cCBT. However, a substantial proportion of reviewed studies revealed several methodical shortcomings. In general, people experience cCBT for depression as predominantly positive, which supports the potential role of these innovative treatments. However, methodological challenges do exist in terms of defining user acceptance, clear operationalization of concepts, and measurement. ©Theresia Rost, Janine Stein, Margrit Löbner, Anette Kersting, Claudia Luck-Sikorski, Steffi G Riedel-Heller. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 13.09.2017.

  12. People’s willingness to accept overdetection in cancer screening: population survey

    Science.gov (United States)

    Jones, Caroline; Yang, Yaling; Oke, Jason; Hewitson, Paul

    2015-01-01

    Objectives To describe the level of overdetection people would find acceptable in screening for breast, prostate, and bowel cancer and whether acceptability is influenced by the magnitude of the benefit from screening and the cancer specific harms from overdetection. Design Online survey. Women were presented with scenarios on breast and bowel cancer, men with scenarios on prostate and bowel cancer. For each particular cancer, we presented epidemiological information and described the treatment and its consequences. Secondly, we presented two different scenarios of benefit: one indicating a 10% reduction in cancer specific mortality and the second indicating a 50% reduction. Setting Online survey of the population in the United Kingdom. Participants Respondents were part of an existing panel of people who volunteer for online research and were invited by email or online marketing. We recruited 1000 respondents, representative for age and sex for the UK population. Main outcome measures Number of cases of overdetection people were willing to accept, ranging from 0-1000 (complete screened population) for each cancer modality and each scenario of benefit. Results There was large variability between respondents in the level of overdetection they would find acceptable, with medians ranging from 113 to 313 cases of overdetection per 1000 people screened. Across all scenarios, 4-7% of respondents indicated they would accept no overdetection at all compared with 7-14% who thought that it would be acceptable for the entire screened population to be overdetected. Acceptability in screening for bowel cancer was significantly lower than for breast and prostate cancer. People aged 50 or over accepted significantly less overdetection, whereas people with higher education levels accepted more; 29% of respondents had heard of overdetection before. Conclusions Acceptability of overdetection in cancer screening is variable. Invitations for screening should include clear information

  13. 40 CFR Table 2 to Subpart Ggggg of... - Control Levels as Required by § 63.7895(a) for Tanks Managing Remediation Material With a Maximum...

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 13 2010-07-01 2010-07-01 false Control Levels as Required by § 63.7895(a) for Tanks Managing Remediation Material With a Maximum HAP Vapor Pressure Less Than 76.6 kPa 2..., Subpt. GGGGG, Table 2 Table 2 to Subpart GGGGG of Part 63—Control Levels as Required by § 63.7895(a) for...

  14. Nevada Test Site Waste Acceptance Criteria

    International Nuclear Information System (INIS)

    U. S. Department of Energy, National Nuclear Security Administration Nevada Site Office

    2005-01-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) waste acceptance criteria (WAC). The WAC provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive (LLW) and mixed waste (MW) for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NTS Area 3 and Area 5 Radioactive Waste Management Complex (RWMC) for storage or disposal

  15. Gender still matters: Employees’ acceptance levels towards e-learning in the workplaces of South Korea

    Directory of Open Access Journals (Sweden)

    Sun Joo Yoo

    2015-06-01

    Full Text Available To facilitate the integration of virtual training and development in workplace learning, this study examined technology acceptance level differences towards e-learning between genders in the South Korean workplace. This study is one of the first to examine this issue in the workplace of South Korea, and it was situated in a food service company in South Korea due to its high training needs and dispersed workplaces. Of the 172 valid datasets (112 female employees and 60 male employees analyzed, the study found that males have a higher performance expectancy, effort expectancy, and intention to use e-learning than females in integrating e-learning. In addition, males were more strongly affected by social influences than females. The findings reaffirm the importance of considering gender differences when integrating e-learning into learning in the workplace.

  16. Measurement methodology for fulfilling of waste acceptance criteria for low and intermediate level radioactive waste in storages - 59016

    International Nuclear Information System (INIS)

    Sokcic-Kostic, M.; Langer, F.; Schultheis, R.

    2012-01-01

    Low and intermediate level radioactive waste must be sorted and treated before it can be sent to radioactive waste storage. The waste must fulfil an extensive amount of acceptance criteria (WAC) to guarantee a safe storage period. NUKEM Technologies has a broad experience with the building and management of radioactive waste treatment facilities and has developed methods and equipment to produce the waste packages and to gather all the required information. In this article we consider low and intermediate level radioactive waste excluding nuclear fuel material, even fresh fuel with low radiation. Only solid radioactive waste (RAW) will be considered. (Liquid RAW is usually processed and solidified before storage. Exception is the reprocessing of nuclear fuel.) Low and intermediate level radioactive waste has to be kept in storage facilities until isotopes are decayed sufficiently and the waste can be released. The storage has to fulfil certain conditions regarding the possible radiological impact and the possible chemical impact on the environment. With the inventory of nuclear waste characterised, the radiological impact can be estimated. RAW mainly originates from the operation of nuclear power plants. A small amount comes from reprocessing installations or from research entities. Chemical safety aspects are of qualitative nature, excluding substances in whole but not compared to limit values. Therefore they have minor influence on the storage conditions. Hereby corrosion and immobilisation of the waste play important roles. The storage concept assumes that the waste will be released if the radioactivity has decreased to an acceptable level. NUKEM Technologies has been specialised on collecting all data needed for the fulfilling of waste acceptance criteria (WAC). The classification as low or intermediate level waste is made on base of surface dose rate of the waste package as well as on the mass specific beta activity. Low level waste must not include isotopes

  17. Social acceptance of solar energy technologies in China-End users' perspective

    International Nuclear Information System (INIS)

    Yuan Xueliang; Zuo Jian; Ma Chunyuan

    2011-01-01

    Energy is essential to human beings. The increasing demand of energy has triggered the public scrutiny on the sustainability issues associated with the energy production and transmission. There have been a large number of studies focusing on reducing the environmental impacts associated with the energy sector. Renewable energy sources such as solar energy have been prompted to mitigate these environmental impacts. This research adopted a quantitative approach to investigate the social acceptance of solar energy technologies from end users' perspective in Shandong province, China. A large scale questionnaire survey was conducted. The results show that there is a considerable high level of social acceptance and public awareness of solar water heater. However, another major application of solar energy, solar PV has not gained a high level of social acceptance or public awareness in Shandong. This study provides useful references for policy makers to further promote the utilization of solar energy innovations. - Research Highlights: → Social acceptance of solar energy technologies from end users' perspective is investigated by a large scale questionnaire survey. → Higher level of social acceptance and public awareness of solar water heater than solar PV. → Impact factors for social acceptance of solar energy technologies are analyzed.

  18. Public Acceptance of Low-Level Waste Disposal Critical to the Nuclear Renaissance

    International Nuclear Information System (INIS)

    Sonny Goldston, W.T.

    2009-01-01

    The disposal of various Low-Level Waste (LLW) forms projected to result from the operation of a pilot or large scale Advanced Fuel Cycle Initiative Programs' (formally known as Global Nuclear Energy Partnership (GNEP)) reprocessing and vitrification plants requires the DOE LLW program and regulatory structure to be utilized in its present form due to the limited availability of Nuclear Regulatory Commission licensed commercial LLW disposal facilities to handle wastes with radionuclide concentrations that are greater than Nuclear Regulatory Commission (NRC) Class A limits. This paper will describe the LLW forms and the regulatory structures and facilities available to dispose of this waste. Then the paper discusses the necessity of an excellent public involvement program to ensure the success of an effective technical solution. All of the decisions associated with the management of these wastes are of interest to the public and successful program implementation would be impossible without including the public up-front in the program formulation. Serious problems can result if program decisions are made without public involvement, and if the public is informed after key decisions are made. This paper will describe the regulatory and public involvement program and their effects on the decisions concerning the disposal of Low-Level Radioactive Waste (LLW) at the Savannah River Site (SRS). An extensive public communications effort resulted in endorsement of changes in disposal practices by the SRS Citizens Advisory Board that was critical to the success of the program. A recommendation will be made to install a public involvement program that is similar to the SRS Citizens Advisory Board in order to ensure the success of the AFCI programs in view of the limited availability to handle the wastes from the program and the public acceptance of change that will be required. (authors)

  19. Double-tailored nonimaging reflector optics for maximum-performance solar concentration.

    Science.gov (United States)

    Goldstein, Alex; Gordon, Jeffrey M

    2010-09-01

    A nonimaging strategy that tailors two mirror contours for concentration near the étendue limit is explored, prompted by solar applications where a sizable gap between the optic and absorber is required. Subtle limitations of this simultaneous multiple surface method approach are derived, rooted in the manner in which phase space boundaries can be tailored according to the edge-ray principle. The fundamental categories of double-tailored reflective optics are identified, only a minority of which can pragmatically offer maximum concentration at high collection efficiency. Illustrative examples confirm that acceptance half-angles as large as 30 mrad can be realized at a flux concentration of approximately 1000.

  20. Austria's wind energy potential – A participatory modeling approach to assess socio-political and market acceptance

    International Nuclear Information System (INIS)

    Höltinger, Stefan; Salak, Boris; Schauppenlehner, Thomas; Scherhaufer, Patrick; Schmidt, Johannes

    2016-01-01

    Techno-economic assessments confirm the potential of wind energy to contribute to a low carbon bioeconomy. The increasing diffusion of wind energy, however, has turned wind energy acceptance into a significant barrier with respect to the deployment of wind turbines. This article assesses whether, and at what cost, Austrian renewable energy targets can be met under different expansion scenarios considering the socio-political and market acceptance of wind energy. Land-use scenarios have been defined in a participatory modeling approach with stakeholders from various interest groups. We calculated the levelized cost of electricity (LCOE) for all of the potential wind turbine sites, which we used to generate wind energy supply curves. The results show that wind energy production could be expanded to 20% of the final end energy demand in three out of four scenarios. However, more restrictive criteria increase LCOE by up to 20%. In contrast to common views that see local opposition against wind projects as the main barrier for wind power expansion, our participatory modeling approach indicates that even on the level of key stakeholders, the future possible contribution of wind energy to Austrian renewable energy targets reaches from almost no further expansion to very high shares of wind energy. - Highlights: • Including social barriers could reduce Austria’s wind potential from 92.78 to 3.89 TWh • Costs for attaining a 20% wind energy share vary by 20% between the scenarios • Socially acceptable wind area potential ranges from 0.1 to 3.9% of Austria’s total area • Excluding forest areas lowers the maximum wind energy potential by 45%

  1. Emotional and rational disease acceptance in patients with depression and alcohol addiction

    OpenAIRE

    Matthiessen Peter F; Büssing Arndt; Mundle Götz

    2008-01-01

    Abstract Background The concept of a rational respectively emotional acceptance of disease is highly valued in the treatment of patients with depression or addiction. Due to the importance of this concept for the long-term course of disease, there is a strong interest to develop a tool to identify the levels and factors of acceptance. We thus intended to test an instrument designed to assess the level of positive psychological wellbeing and coping, particularly emotional disease acceptance an...

  2. Nevada Test Site Waste Acceptance Criteria

    International Nuclear Information System (INIS)

    U.S. Department of Energy, Nevada Operations Office, Waste Acceptance Criteria

    1999-01-01

    This document provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive and mixed waste for disposal; and transuranic and transuranic mixed waste for interim storage at the Nevada Test Site

  3. Acceptance criteria for disposal of radioactive wastes in shallow ground and rock cavities

    International Nuclear Information System (INIS)

    1985-01-01

    This document provides an overview of basic information related to waste acceptance criteria for disposal in shallow ground and rock cavity repositories, consisting of a discussion of acceptable waste types. The last item includes identification of those waste characteristics which may influence the performance of the disposal system and as such are areas of consideration for criteria development. The material is presented in a manner similar to a safety assessment. Waste acceptance criteria aimed at limiting the radiation exposure to acceptable levels are presented for each pathway. Radioactive wastes considered here are low-level radioactive wastes and intermediate-level radioactive wastes from nuclear fuel cycle operations and applications of radionuclides in research, medicine and industry

  4. Approaches to gaining public acceptance of repository siting

    International Nuclear Information System (INIS)

    Numark, N.J.; Wonder, E.F.

    1989-01-01

    An eight-country survey reveals a diversity of strategies that have been followed for siting radioactive waste repositories, as well as a range of levels of public acceptance of siting efforts. Although the strategies are not necessarily interchangeable from country to country, certain inferences may be drawn from worldwide siting experience regarding ways to maximize public acceptance. Furthermore, waste management organizations in these countries have placed varying amounts of stock in technical review by outside experts and in a range of communications strategies as means of improving public acceptance. Our survey of worldwide experience also allows some general observations to be made regarding the effectiveness of these efforts. Combining a strategy that elevates public acceptance to part of the overall mission of siting a waste management facility with strategies for appropriate communications and external technical review may be necessary and sufficient for gaining improvements in public acceptance of proposed repository sites

  5. Criteria for risk acceptance: a health physicist's view

    International Nuclear Information System (INIS)

    Hull, A. P.

    1977-01-01

    While energy need (or demand) and the risks of energy production and use may be objectively quantified, risk acceptance embodies a subjective element of preferences and values. Yet, as demonstrated by the nuclear controversy in the United States, public acceptance is essential to the beneficial uses of radiation. The statement of the objectives and purposes of the Health Physics Society and our application of it are proposed as offering useful criteria for risk acceptance. The principle of comparing risk with a number of those regularly accepted in everyday life is emphasized. On this basis, it is concluded that the expenditures to attain currently applicable or proposed 'as low as practicable' (or 'as low as readily achievable') levels for the nuclear fuel cycle are disproportionate to those addressed to other sources of general public exposure to radiation. They are also disproportionate compared to those addressed to a variety of public health risks. It is suggested that sensible priorities for radiation and public health protection might be achieved by the application of a de minimus negligible (but nonzero) level of probable risk. (Research supported by the U.S. Energy Research and Development Administration.)

  6. Acceptance test procedure for High Pressure Water Jet System

    International Nuclear Information System (INIS)

    Crystal, J.B.

    1995-01-01

    The overall objective of the acceptance test is to demonstrate a combined system. This includes associated tools and equipment necessary to perform cleaning in the 105 K East Basin (KE) for achieving optimum reduction in the level of contamination/dose rate on canisters prior to removal from the KE Basin and subsequent packaging for disposal. Acceptance tests shall include necessary hardware to achieve acceptance of the cleaning phase of canisters. This acceptance test procedure will define the acceptance testing criteria of the high pressure water jet cleaning fixture. The focus of this procedure will be to provide guidelines and instructions to control, evaluate and document the acceptance testing for cleaning effectiveness and method(s) of removing the contaminated surface layer from the canister presently identified in KE Basin. Additionally, the desired result of the acceptance test will be to deliver to K Basins a thoroughly tested and proven system for underwater decontamination and dose reduction. This report discusses the acceptance test procedure for the High Pressure Water Jet

  7. Working Toward Public Acceptance in Germany

    International Nuclear Information System (INIS)

    Peter Haug; Sabine Knapp

    1992-01-01

    West German utilities show a typical three level structure: local distributors, regional producers/distributors and some ten nationwide producers/distributors. Only the latter have the necessary financial and organizational means for running nuclear power stations. Public acceptance, on the other hand, does not care for state borders. Today, the leading German electronic media and the relevant print media are being distributed and received nationwide, transporting opinion as well as acceptance or non-acceptance. This paper describes the main projects of 'Nuclear Information Group' and the strategy considerations behind. Information centers at NPP sites can cover local information needs, regional utilities will cope with regional needs. It became obvious at the very beginning of the nuclear controversy, however, that it is also necessary to establish an additional, strictly federal, i. e. central, organisation that takes care of all nationwide information needs

  8. Is quality of life related to illness and acceptance of illness?

    Directory of Open Access Journals (Sweden)

    Janusz Kocjan

    2015-06-01

    SUMMARY Introduction: Although, that the general well-being is extensively studied in wide range of contexts, still little place is devoting to relationship between acceptance of illness (AIS and quality of life (QoL, especially among cardiac patients. Aim: The aim of this study was to: (1 determine an association between these two variables; (2 examine relationship between selected variables (age, sex, education level, NYHA class, time since CVDs diagnosis, cardiosurgery intervention and presence of comorbid diseases and quality of life. Material and methods: The study included 172 patients with diagnose cardiac disease. All participants were examined used standardized questionnaires: Short Form of health survey (SF-36 questionnaire and Acceptance of Illness Scale (AIS. Results: The patients presented moderate level of illness acceptance and quality of life level. Over than half of participants did not accept their illness. Significant, positive relatioship between AIS and QoL were noted. NYHA class, number of cardiac hospitalization and time since cardiovascular disease diagnosis was negatively correlated with QoL. Conclusions: Findings presented in this study demonstrated, that AIS is strongly related with QoL.    Key words: illness acceptance, quality of life, AIS, QoL, cardiac diseases.

  9. Consumers' acceptance of medicinal herbs: An application of the technology acceptance model (TAM).

    Science.gov (United States)

    Jokar, Nargesh Khatun; Noorhosseini, Seyyed Ali; Allahyari, Mohammad Sadegh; Damalas, Christos A

    2017-07-31

    The shift in consumers' preferences from synthetic to 'natural' products has led to a resurgence of interest in medicinal plants, particularly in developing countries. However, research data about consumers' preferences for particular products is hard to find. The main objective of this study was to contribute to the general understanding of consumers' intention for selecting medicinal herbs for consumption. Factors underpinning consumers' acceptance of medicinal herbs were studied with the technology acceptance model (TAM) in Rasht City of Iran using a structured questionnaire. Most respondents had low to moderate familiarity with consumption of medicinal herbs. However, about half of the respondents (47.5%) showed a high level of acceptance of medicinal herbs. Herbs like spearmint (Mentha spicata L.), spinach (Spinacia oleracea L.), basil (Ocimum basilicum L.), Damask rose (Rosa × damascena Herrm.), saffron (Crocus sativus L.), cinnamon (Cinnamomum verum J.Presl), flixweed [Descurainia sophia (L.) Webb ex Prantl], red feathers (Echium amoenum Fisch. & C.A.Mey.), and green tea [Camellia sinensis (L.) Kuntze] had the highest consumption rate among the majority (over 75%) of citizens of Rasht. The highest rate of perceived usefulness of medicinal herbs was related to their perceived role in healing diseases. The variable of importance of use of medicinal herbs had the strongest direct effect and the variables of perceived usefulness and attitude towards use had the second and third strongest direct effect on the acceptance of medicinal herbs' use at p acceptance of medicinal herbs and may serve as a benchmark for future research and evaluation concerning the use of medicinal herbs over time. For plant producers, more effective and targeted crop development should be encouraged, whereas for retailers better marketing and delivery strategies should be sought. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

  10. Flexibility-Based Evaluation of Variable Generation Acceptability in Korean Power System

    Directory of Open Access Journals (Sweden)

    Chang-Gi Min

    2017-06-01

    Full Text Available This study proposes an evaluation method for variable generation (VG acceptability with an adequate level of power system flexibility. In this method, a risk index referred to as the ramping capability shortage expectation (RSE is used to quantify flexibility. The RSE value of the current power system is selected as the adequate level of flexibility (i.e., RSE criterion. VG acceptability is represented by the VG penetration level for the RSE criterion. The proposed evaluation method was applied to the generation expansion plan in Korea for 2029 in order to examine the validity of the existing plan for VG penetration. Sensitivity analysis was also performed to analyze the effects of changes in system uncertainty on VG acceptability. The results show that the planned VG penetration level for 2029 can improve by approximately 12% while securing flexibility.

  11. Self-reported sleep disturbances due to railway noise: exposure-response relationships for nighttime equivalent and maximum noise levels.

    Science.gov (United States)

    Aasvang, Gunn Marit; Moum, Torbjorn; Engdahl, Bo

    2008-07-01

    The objective of the present survey was to study self-reported sleep disturbances due to railway noise with respect to nighttime equivalent noise level (L(p,A,eq,night)) and maximum noise level (L(p,A,max)). A sample of 1349 people in and around Oslo in Norway exposed to railway noise was studied in a cross-sectional survey to obtain data on sleep disturbances, sleep problems due to noise, and personal characteristics including noise sensitivity. Individual noise exposure levels were determined outside of the bedroom facade, the most-exposed facade, and inside the respondents' bedrooms. The exposure-response relationships were analyzed by using logistic regression models, controlling for possible modifying factors including the number of noise events (train pass-by frequency). L(p,A,eq,night) and L(p,A,max) were significantly correlated, and the proportion of reported noise-induced sleep problems increased as both L(p,A,eq,night) and L(p,A,max) increased. Noise sensitivity, type of bedroom window, and pass-by frequency were significant factors affecting noise-induced sleep disturbances, in addition to the noise exposure level. Because about half of the study population did not use a bedroom at the most-exposed side of the house, the exposure-response curve obtained by using noise levels for the most-exposed facade underestimated noise-induced sleep disturbance for those who actually have their bedroom at the most-exposed facade.

  12. Flexibility-Based Evaluation of Variable Generation Acceptability in Korean Power System

    OpenAIRE

    Chang-Gi Min; Mun-Kyeom Kim

    2017-01-01

    This study proposes an evaluation method for variable generation (VG) acceptability with an adequate level of power system flexibility. In this method, a risk index referred to as the ramping capability shortage expectation (RSE) is used to quantify flexibility. The RSE value of the current power system is selected as the adequate level of flexibility (i.e., RSE criterion). VG acceptability is represented by the VG penetration level for the RSE criterion. The proposed evaluation method was ap...

  13. Social acceptance and population confidence in telehealth in Quebec.

    Science.gov (United States)

    Poder, Thomas G; Bellemare, Christian A; Bédard, Suzanne K; Lemieux, Renald

    2015-02-21

    Access to healthcare in remote areas is difficult and telehealth could be a promising avenue if accepted by the population. The aim of this study is to assess social acceptance and population confidence in telehealth in the Province of Quebec. We conducted a survey using a questionnaire assessing the social acceptance of and confidence level in telehealth. Two strategies were used: 1) paper questionnaires were sent to two hospitals in Quebec; and 2) online questionnaires were randomly sent by a firm specialized in online survey to a representative sample of the population of the Province of Quebec. Respondents were all residents of the Province of Quebec and 18 years and older. Questions were scored with a four-level Likert scale. A total of 1816 questionnaires were analyzed (229 written and 1,587 online questionnaires). The socio-demographic variables in our samples, especially the online questionnaires, were fairly representative of Quebec's population. Overall, social acceptance scored at 77.71% and confidence level at 65.76%. Both scores were higher in the case of treatment (3 scenarios were proposed) vs. diagnosis (p < 0.05). No difference was found when respondents were asked to respond for themselves and for a member of their family, which demonstrates a true interest in telehealth in Quebec. In addition, we found a significant difference (p < 0.05) between written and online questionnaires regarding social acceptance (80.75% vs. 77.33%) and confidence level (74.84% vs. 64.55%). These differences may be due to social desirability or avidity bias in the written questionnaires. Our results suggest that the population in Quebec encourages the development of telehealth for real time diagnosis and long distance treatment for regions deprived of healthcare professionals.

  14. Responsible technology acceptance

    DEFF Research Database (Denmark)

    Toft, Madeleine Broman; Schuitema, Geertje; Thøgersen, John

    2014-01-01

    As a response to climate change and the desire to gain independence from imported fossil fuels, there is a pressure to increase the proportion of electricity from renewable sources which is one of the reasons why electricity grids are currently being turned into Smart Grids. In this paper, we focus...... on private consumers’ acceptance of having Smart Grid technology installed in their home. We analyse acceptance in a combined framework of the Technology Acceptance Model and the Norm Activation Model. We propose that individuals are only likely to accept Smart Grid technology if they assess usefulness...... in terms of a positive impact for society and the environment. Therefore, we expect that Smart Grid technology acceptance can be better explained when the well-known technology acceptance parameters included in the Technology Acceptance Model are supplemented by moral norms as suggested by the Norm...

  15. Environment and public acceptance

    International Nuclear Information System (INIS)

    Gauvenet; Bresson; Braillard; Ertaud; Ladonchamps, de; Toureau

    1976-01-01

    The problems involved in the siting of nuclear power stations at a local level are of a political economic, social or ecological order. The acceptance of a nuclear station mostly depends on its interest for the local population. In order to avoid negative reactions, the men who are responsible must make the harmonious integration of the station within the existing economic and social context their first priority [fr

  16. Vehicle-to-Vehicle crash avoidance technology : public acceptance final report.

    Science.gov (United States)

    2015-12-01

    The Vehicle-to-Vehicle (V2V) Crash Avoidance Public Acceptance report summarizes data from a survey of the current level of awareness and acceptance of V2V technology. The survey was guided by findings from prior studies and 12 focus groups. A total ...

  17. Acceptance of Others, Feeling of Being Accepted and Striving for Being Accepted Among the Representatives of Different Kinds of Occupations

    Directory of Open Access Journals (Sweden)

    Gergana Stanoeva

    2012-05-01

    Full Text Available This paper deals with an important issue related to the human attitudes and needs in interpersonal and professional aspects. The theoretical part deals with several psychological components of the self-esteem and esteem of the others – acceptance of the others, feeling of being accepted, need for approval. Some gender differences in manifestations of acceptance and feeling of being accepted at the workplace are discussed. This article presents some empirical data for the degree of acceptance of others, feeling of being accepted and the strive for being accepted among the representatives of helping, pedagogical, administrative and economic occupations, as well as non-qualified workers. The goals of the study were to reveal the interdependency between these constructs and to be found some significant differences between the representatives of the four groups of occupations. The methods of the first study were W. Fey’s scales “Acceptance of others”, and “How do I feel accepted by others”. The method of the second study was Crown and Marlowe Scale for Social Desirability. The results indicated some significant differences in acceptance of others and feeling of being accepted between the non-qualified workers and the representatives of helping, administrative and economic occupations. There were not any significant difference in strive for being accepted between the fouroccupational groups.

  18. Development of Waste Acceptance Criteria at 221-U Building: Initial Flow and Transport Scoping Calculations

    Energy Technology Data Exchange (ETDEWEB)

    Freedman, Vicky L.; Zhang, Z. F.; Keller, Jason M.; Chen, Yousu

    2007-05-30

    This report documents numerical flow and transport simulations performed that establish initial waste acceptance criteria for the potential waste streams that may be safely sequestered in the 221-U Building and similar canyon structures. Specifically, simulations were executed to identify the maximum loading of contaminant mass (without respect to volume) that can be emplaced within the 221-U Building with no more than 1 pCi/m2 of contaminant migrating outside the structure within a 1,000 year time period. The initial scoping simulations were executed in one dimension to assess important processes, and then two dimensions to establish waste acceptance criteria. Two monolithic conditions were assessed: (1) a grouted canyon monolith; and (2) a canyon monolith filled with sand, both assuming no cracks or fissures were present to cause preferential transport. A three-staged approach was taken to account for different processes that may impact the amount of contaminant that can be safely sequestered in canyon structure. In the first stage, flow and transport simulations established waste acceptance criteria based on a linear (Kd) isotherm approach. In the second stage, impacts on thermal loading were examined and the differences in waste acceptance criteria quantified. In the third stage of modeling, precipitation/dissolution reactions were considered on the release and transport of the contaminants, and the subsequent impact on the maximum contaminant loading. The reactive transport modeling is considered a demonstration of the reactive transport capability, and shows the importance of its use for future performance predictions once site-specific data have been obtained.

  19. Microprocessor-controlled step-down maximum-power-point tracker for photovoltaic systems

    Science.gov (United States)

    Mazmuder, R. K.; Haidar, S.

    1992-12-01

    An efficient maximum power point tracker (MPPT) has been developed and can be used with a photovoltaic (PV) array and a load which requires lower voltage than the PV array voltage to be operated. The MPPT makes the PV array to operate at maximum power point (MPP) under all insolation and temperature, which ensures the maximum amount of available PV power to be delivered to the load. The performance of the MPPT has been studied under different insolation levels.

  20. Considerations on the establishment of maximum permissible exposure of man

    International Nuclear Information System (INIS)

    Jacobi, W.

    1974-01-01

    An attempt is made in the information lecture to give a quantitative analysis of the somatic radiation risk and to illustrate a concept to fix dose limiting values. Of primary importance is the limiting values. Of primary importance is the limiting value of the radiation exposure to the whole population. By consequential application of the risk concept, the following points are considered: 1) Definition of the risk for radiation late damages (cancer, leukemia); 2) relationship between radiation dose and thus caused radiation risk; 3) radiation risk and the dose limiting values at the time; 4) criteria for the maximum acceptable radiation risk; 5) limiting value which can be expected at the time. (HP/LH) [de

  1. Multi-discipline Waste Acceptance Process at the Nevada National Security Site - 13573

    Energy Technology Data Exchange (ETDEWEB)

    Carilli, Jhon T. [US Department Of Energy, Nevada Site Office, P. O. Box 98518, Las Vegas, Nevada 89193-8518 (United States); Krenzien, Susan K. [Navarro-Intera, LLC, P. O. Box 98952, Las Vegas, Nevada 89193-8952 (United States)

    2013-07-01

    The Nevada National Security Site low-level radioactive waste disposal facility acceptance process requires multiple disciplines to ensure the protection of workers, the public, and the environment. These disciplines, which include waste acceptance, nuclear criticality, safety, permitting, operations, and performance assessment, combine into the overall waste acceptance process to assess low-level radioactive waste streams for disposal at the Area 5 Radioactive Waste Management Site. Four waste streams recently highlighted the integration of these disciplines: the Oak Ridge Radioisotope Thermoelectric Generators and Consolidated Edison Uranium Solidification Project material, West Valley Melter, and classified waste. (authors)

  2. Maximum permissible dose

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    This chapter presents a historic overview of the establishment of radiation guidelines by various national and international agencies. The use of maximum permissible dose and maximum permissible body burden limits to derive working standards is discussed

  3. Nevada National Security Site Waste Acceptance Criteria

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Management

    2010-09-03

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NNSSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NNSS Area 3 and Area 5 Radioactive Waste Management Complex for disposal. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project at (702) 295-7063 or fax to (702) 295-1153.

  4. Nevada National Security Site Waste Acceptance Criteria

    International Nuclear Information System (INIS)

    2010-01-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NNSSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NNSS Area 3 and Area 5 Radioactive Waste Management Complex for disposal. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project at (702) 295-7063 or fax to (702) 295-1153.

  5. Nevada National Security Site Waste Acceptance Criteria

    International Nuclear Information System (INIS)

    2011-01-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NNSSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NNSS Area 3 and Area 5 Radioactive Waste Management Complex for disposal. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project at (702) 295-7063 or fax to (702) 295-1153.

  6. Acceptability of Internet treatment of anxiety and depression.

    Science.gov (United States)

    Gun, Shih Ying; Titov, Nickolai; Andrews, Gavin

    2011-06-01

    The Internet is increasingly used to deliver treatment programs for common mental disorders. However, little is known about the acceptability of online interventions. The present study used an online survey to explore levels of acceptability of Internet-based treatment programs for anxiety and depression. Visitors to websites operated by the Clinical Research Unit for Anxiety and Depression (CRUfAD), were invited to complete an online questionnaire during 16 weeks in 2008. Of 1543 people who began the survey, 1104 (72%) Australian health professionals and lay people completed it. Internet treatment programs for people with mild or moderate symptoms were more acceptable than programs for people with severe symptoms. There were no differences between health professionals and non-health professionals in acceptability ratings. As expected, previous users of Internet treatments reported significantly greater acceptability and preference for Internet treatments than non-users. Respondents rated Internet-based treatment programs as acceptable, with higher ratings from previous users. In order to facilitate implementation, program developers need to implement strategies for increasing knowledge about the efficacy and effectiveness of such programs, and engage therapists and consumers in establishing ethical and professional guidelines for their safe and responsible use.

  7. Nevada test site waste acceptance criteria

    International Nuclear Information System (INIS)

    1996-01-01

    This document provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive and mixed waste for disposal; and transuranic and transuranic mixed waste for interim storage at the NTS. Review each section of this document. This document is not intended to include all of the requirements; rather, it is meant as a guide toward meeting the regulations. All references in this document should be observed to avoid omission of requirements on which acceptance or rejection of waste will be based. The Department of Energy/Nevada Operations Office (DOE/NV) and support contractors are available to assist you in understanding or interpreting this document

  8. Nevada test site waste acceptance criteria

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    This document provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive and mixed waste for disposal; and transuranic and transuranic mixed waste for interim storage at the NTS. Review each section of this document. This document is not intended to include all of the requirements; rather, it is meant as a guide toward meeting the regulations. All references in this document should be observed to avoid omission of requirements on which acceptance or rejection of waste will be based. The Department of Energy/Nevada Operations Office (DOE/NV) and support contractors are available to assist you in understanding or interpreting this document.

  9. Emotional and rational disease acceptance in patients with depression and alcohol addiction

    Directory of Open Access Journals (Sweden)

    Matthiessen Peter F

    2008-01-01

    Full Text Available Abstract Background The concept of a rational respectively emotional acceptance of disease is highly valued in the treatment of patients with depression or addiction. Due to the importance of this concept for the long-term course of disease, there is a strong interest to develop a tool to identify the levels and factors of acceptance. We thus intended to test an instrument designed to assess the level of positive psychological wellbeing and coping, particularly emotional disease acceptance and life satisfaction Methods In an anonymous cross-sectional survey enrolling 115 patients (51% female, 49% male; mean age 47.6 ± 10.0 years with depression and/or alcohol addiction, the ERDA questionnaire was tested. Results Factor analysis of the 29-item construct (Cronbach's alpha = 0.933 revealed a 4-factor solution, which explained 59.4% of variance: (1 Positive Life Construction, Contentedness and Well-Being; (2 Conscious Dealing with Illness; (3 Rejection of an Irrational Dealing with Disease; (4 Disease Acceptance. Two factors could be ascribed to a rational, and two to an emotional acceptance. All factors correlated negatively with Depression and Escape, while several aspects of Life Satisfaction" (i.e. myself, overall life, where I live, and future prospects correlated positively. The highest factor scores were found for the rational acceptance styles (i.e. Conscious Dealing with Illness; Disease Acceptance. Emotional acceptance styles were not valued in a state of depression. Escape from illness was the strongest predictor for several acceptance aspects, while life satisfaction was the most relevant predictor for "Positive Life Construction, Contentedness and Well-Being". Conclusion The ERDA questionnaire was found to be a reliable and valid assessment of disease acceptance strategies in patients with depressive disorders and drug abuses. The results indicate the preferential use of rational acceptance styles even in depression. Disease acceptance

  10. Emotional and rational disease acceptance in patients with depression and alcohol addiction.

    Science.gov (United States)

    Büssing, Arndt; Matthiessen, Peter F; Mundle, Götz

    2008-01-21

    The concept of a rational respectively emotional acceptance of disease is highly valued in the treatment of patients with depression or addiction. Due to the importance of this concept for the long-term course of disease, there is a strong interest to develop a tool to identify the levels and factors of acceptance. We thus intended to test an instrument designed to assess the level of positive psychological wellbeing and coping, particularly emotional disease acceptance and life satisfaction In an anonymous cross-sectional survey enrolling 115 patients (51% female, 49% male; mean age 47.6 +/- 10.0 years) with depression and/or alcohol addiction, the ERDA questionnaire was tested. Factor analysis of the 29-item construct (Cronbach's alpha = 0.933) revealed a 4-factor solution, which explained 59.4% of variance: (1) Positive Life Construction, Contentedness and Well-Being; (2) Conscious Dealing with Illness; (3) Rejection of an Irrational Dealing with Disease; (4) Disease Acceptance. Two factors could be ascribed to a rational, and two to an emotional acceptance. All factors correlated negatively with Depression and Escape, while several aspects of Life Satisfaction" (i.e. myself, overall life, where I live, and future prospects) correlated positively. The highest factor scores were found for the rational acceptance styles (i.e. Conscious Dealing with Illness; Disease Acceptance). Emotional acceptance styles were not valued in a state of depression. Escape from illness was the strongest predictor for several acceptance aspects, while life satisfaction was the most relevant predictor for "Positive Life Construction, Contentedness and Well-Being". The ERDA questionnaire was found to be a reliable and valid assessment of disease acceptance strategies in patients with depressive disorders and drug abuses. The results indicate the preferential use of rational acceptance styles even in depression. Disease acceptance should not be regarded as a coping style with an attitude

  11. The effect of survivalism--self-expressionism culture on black male suicide acceptability: a cross-national analysis.

    Science.gov (United States)

    Stack, Steven; Kposowa, Augustine J

    2011-04-01

    Cultural explanations of black suicide have focused on the US and stressed religiosity as a protective factor. This paper adds to this literature by (1) expanding the analysis of the impact of religiosity on black suicide to 10 nations, and (2) assessing the extent to which a broader cultural construct (self expressionism) affects black suicide acceptability. Data are from Wave 4 of the World Values Surveys 1991-2001 and refer to 3580 black males nested in ten countries. A hierarchical linear regression model determined that religiosity predicted black suicide acceptability across ten nations. Self expressionism was positively associated with individual level suicide acceptability. Further, a cross-level interaction was found wherein individual level and societal level self expressionism combined to affect suicide acceptability. The variability in suicide acceptability among black males is predicted, in part, by both individual and group levels of adherence to values contained in a major cultural axis of nations: self expressionism. These new found associations compliment the impact of a standard predictor, religiosity, on suicide acceptability. Copyright © 2011 Elsevier Ltd. All rights reserved.

  12. Local acceptance of existing biogas plants in Switzerland

    International Nuclear Information System (INIS)

    Soland, Martin; Steimer, Nora; Walter, Götz

    2013-01-01

    After the Swiss government's decision to decommission its five nuclear power plants by 2035, energy production from wind, biomass, biogas and photovoltaic is expected to increase significantly. Due to its many aspects of a direct democracy, high levels of public acceptance are necessary if a substantial increase in new renewable energy power plants is to be achieved in Switzerland. A survey of 502 citizens living near 19 biogas plants was conducted as the basis for using structural equation modeling to measure the effects of perceived benefits, perceived costs, trust towards the plant operator, perceived smell, information received and participation options on citizens’ acceptance of “their” biogas plant. Results show that local acceptance towards existing biogas power plants is relatively high in Switzerland. Perceived benefits and costs as well as trust towards the plant operator are highly correlated and have a significant effect on local acceptance. While smell perception and information received had a significant effect on local acceptance as well, no such effect was found for participation options. Reasons for the non-impact of participation options on local acceptance are discussed, and pathways for future research are presented. - Highlights: • Acceptance of biogas plants by local residents in Switzerland is relatively high. • Local acceptance is highly affected by perceived outcomes and citizens’ trust. • Smell perception increases perceived costs and reduces perceived benefits and trust. • Information offers reduce perceived costs and increase trust and perceived benefits. • Participation offers do not have any effect on local acceptance

  13. Research on network maximum flows algorithm of cascade level graph%级连层次图的网络最大流算法研究

    Institute of Scientific and Technical Information of China (English)

    潘荷新; 伊崇信; 李满

    2011-01-01

    给出一种通过构造网络级连层次图的方法,来间接求出最大网络流的算法.对于给定的有n个顶点,P条边的网络N=(G,s,t,C),该算法可在O(n2)时间内快速求出流经网络N的最大网络流及达最大流时的网络流.%This paper gives an algoritm that structures a network cascade level graph to find out maximum flow of the network indirectly.For the given network N=(G,s,t,C) that has n vetexes and e arcs,this algorithm finds out the maximum value of the network flow fast in O(n2) time that flows from the network N and the network flows when the value of the one reach maximum.

  14. Post flight analysis of NASA standard star trackers recovered from the solar maximum mission

    Science.gov (United States)

    Newman, P.

    1985-01-01

    The flight hardware returned after the Solar Maximum Mission Repair Mission was analyzed to determine the effects of 4 years in space. The NASA Standard Star Tracker would be a good candidate for such analysis because it is moderately complex and had a very elaborate calibration during the acceptance procedure. However, the recovery process extensively damaged the cathode of the image dissector detector making proper operation of the tracker and a comparison with preflight characteristics impossible. Otherwise, the tracker functioned nominally during testing.

  15. How to design your stand-by diesel generator unit for maximum reliability

    International Nuclear Information System (INIS)

    Kauffmann, W.M.

    1979-01-01

    Critical stand-by power applications, such as in a nuclear plant, or radio support stations, demand exacting guidelines for positive start, rapid acceleration, load acceptance with minimum voltage drop, and quick recovery to rated voltage. The design of medium-speed turbocharged and intercooled diesel-engine-generator for this purpose is considered. Selection of the diesel engine, size, and number of units, from the standpoint of cost, favors minimum number of units with maximum horsepower capability. Four-cycle diesels are available in 16 to 20 cyinders V-configurations, with 200 BMEP (brake mean-effective pressure) continuous and 250 BMEP peaking

  16. Psychosocial determinants of disease acceptance in selected mental disorders.

    Science.gov (United States)

    Bogusz, Renata; Humeniuk, Ewa

    2017-12-23

    Every mental disorder may cause a number of negative consequences in the personal lives of the patients and their families as well as in their social relations. Acceptance of the disease is a crucial factor in the process of coping with the problems resulting from it. Acceptance of the disease may significantly influence the reduction of negative emotional reactions it causes. Consequently, it may contribute to better adaptation of the patients and hence may facilitate the process of recovery. The study attempts to define the socio-psychological conditioning of the degree of disease acceptance among patients treated for psychical disorders. Opinion surveys were carried out in 2013 among a group of 240 patients treated in Mental Health Clinic in Chełm, eastern Poland. The study applied Acceptance Illness Scale - AIS B. Felton, T. A. Revenson, G.A. Hinrichsen, adapted in Poland by Z. Juczyński, as well as a socio-demographic questionnaire. The analysis of the obtained results revealed a similar level of acceptance of such diseases as anxiety disorders (24.41±8.52), depression (22.80±7.51) and personality disorders (23.89±7.89). The medical records of all patients fitted among the low average. The greatest problem in the researched group related to the social consequences of the psychical disorders. Those questioned were afraid of the negative reactions of others and of being a burden to their families. The level of acceptance was not correlated with independent variables (age, gender, education, place of residence, general well-being).

  17. Acceptable risks: occupational health in the nuclear industry

    International Nuclear Information System (INIS)

    Brown, M.S.

    1980-01-01

    This thesis examines the risk of working in the nuclear power industry. It reviews the history of the industry, government regulatory activities, and current scientific evidence of the health effects of radiation exposure. A discussion of current controversies over reduction in exposure limits is presented along with an analysis of the issues and problems associated with determinations of acceptable workplace risks. The thesis analyzes the controversy in terms of the acceptability of risk. The question of acceptability does not lend itself to technical evaluations of risks, costs, and benefits but is a social judgment of the necessity of a particular occupation or industry in society. At issue is the level of profits foregone by reductions in risk. This document concludes that the legitimacy of decisions about acceptable risks rests on the informed participation of all interested parties, including workers, in a process of defining socially necessary production. There must be opportunities to refuse higher risk jobs without losing a livelihood and adequate compensation for workers who accept hazardous jobs for the benefit of society

  18. Utilization of Multimedia Laboratory: An Acceptance Analysis using TAM

    Science.gov (United States)

    Modeong, M.; Palilingan, V. R.

    2018-02-01

    Multimedia is often utilized by teachers to present a learning materials. Learning that delivered by multimedia enables people to understand the information of up to 60% of the learning in general. To applying the creative learning to the classroom, multimedia presentation needs a laboratory as a space that provides multimedia needs. This study aims to reveal the level of student acceptance on the multimedia laboratories, by explaining the direct and indirect effect of internal support and technology infrastructure. Technology Acceptance Model (TAM) is used as the basis of measurement on this research, through the perception of usefulness, ease of use, and the intention, it’s recognized capable of predicting user acceptance about technology. This study used the quantitative method. The data analysis using path analysis that focuses on trimming models, it’s performed to improve the model of path analysis structure by removing exogenous variables that have insignificant path coefficients. The result stated that Internal Support and Technology Infrastructure are well mediated by TAM variables to measure the level of technology acceptance. The implications suggest that TAM can measure the success of multimedia laboratory utilization in Faculty of Engineering UNIMA.

  19. Variables associated with human papillomavirus (HPV) vaccine acceptance by men.

    Science.gov (United States)

    Ferris, Daron G; Waller, Jennifer L; Miller, Jeremiah; Patel, Pratik; Price, George A; Jackson, Lanier; Wilson, Courtesia

    2009-01-01

    To determine correlates of human papillomavirus (HPV) vaccine acceptance for men. A convenience sample of men aged 18 to 45 years read a one-page information sheet about HPV and the HPV vaccine, then completed a 29-item questionnaire. chi(2) tests were used to determine whether differences in demographic, sexual, and vaccine-related variables existed between levels of wanting the HPV vaccine. Positive correlates of HPV vaccine acceptance included higher education (P acceptance of the HPV vaccine by men.

  20. Maximum Permissible Risk Levels for Human Intake of Soil Contaminants: Fourth Series of Compounds

    NARCIS (Netherlands)

    Janssen PJCM; Apeldoorn ME van; Engelen JGM van; Schielen PCJI; Wouters MFA; CSR

    1998-01-01

    This report documents the human-toxicological risk assessment work done in 1996 and 1997 at RIVM's Centre for Substances and Risk Assessment within the scope of the RIVM project on soil intervention values for soil clean-up. The method used for derivation of the Maximum Permissible Risk, as

  1. The influence of tinnitus acceptance on the quality of life and psychological distress in patients with chronic tinnitus

    Directory of Open Access Journals (Sweden)

    David Riedl

    2015-01-01

    Full Text Available Recent findings show the importance of acceptance in the treatment of chronic tinnitus. So far, very limited research investigating the different levels of tinnitus acceptance has been conducted. The aim of this study was to investigate the quality of life (QoL and psychological distress in patients with chronic tinnitus who reported different levels of tinnitus acceptance. The sample consisted of outpatients taking part in a tinnitus coping group (n = 97. Correlations between tinnitus acceptance, psychological distress, and QoL were calculated. Receiver operating characteristic (ROC curves were used to calculate a cutoff score for the German "Tinnitus Acceptance Questionnaire" (CTAQ-G and to evaluate the screening abilities of the CTAQ-G. Independent sample t-tests were conducted to compare QoL and psychological distress in patients with low tinnitus acceptance and high tinnitus acceptance. A cutoff point for CTAQ-G of 62.5 was defined, differentiating between patients with "low-to-mild tinnitus acceptance" and "moderate-to-high tinnitus acceptance." Patients with higher levels of tinnitus acceptance reported a significantly higher QoL and lower psychological distress. Tinnitus acceptance plays an important role for patients with chronic tinnitus. Increased levels of acceptance are related to better QoL and less psychological distress.

  2. Disease acceptance and the ways of coping with stress inpatients on dialysis

    Directory of Open Access Journals (Sweden)

    Krystyna Kurowska

    2013-06-01

    Full Text Available Introduction: A chronic disease changes the patients functioning in many different areas of their lives. Most of them cannot accept the disease and rarely make an effort to change their current health situation. Aim of the study: To define the level of acceptance of the disease as well as the preferred ways of coping with stress in patients on dial‑ ysis, suffering from chronic renal disease. Material and methods: Ninety-four patients on dialysis, with chronic renal failure, were examined. The study was conducted in two dialysis units: Dialyses Centre Fresenius Nephrocare III in Bydgoszcz and NZOZ Avitum, Dialysis Unit in Nakło. Adjustment to the disease was assessed using the Accep‑ tance of Illness Scale (AIS adapted by Juczyński, the way of dealing with stressful situations was tested using CISS questionnaire by Endler and Parker, in Polish adaptation by Szczepanik, Strelau and Wrześniewski. Results: The examined group reached the average level of the disease acceptance. Men, people aged up to 59 years and those living in towns exhibit a higher level of disease acceptance. The higher the education level, the higher the patient’s ability to adjust to the disease. The most common style of coping with stress was the task-oriented style which was followed by the emotion-oriented style and the avoidance-oriented style. The  level of  the disease acceptance decreased with increasing emotion-oriented style. Conclusions: The obtained results will help to understand people with chronic renal failure, assist them in finding new ways of coping with stress, and thereby increase the acceptance of the disease. They will also allow to plan a better care for dialysis patients.

  3. Identification and understanding the factors affecting the public and political acceptance of long term storage of spent fuel and high-level radioactive wastes

    International Nuclear Information System (INIS)

    Gorea, Valica

    2006-01-01

    In the end of 2004, according to the information available to the IAEA, there were 440 nuclear reactors operating worldwide, with a total net capacity of 366.3 GW(e), 6 of them being connected to the grid in 2004 ( 2 in Ukraine, one each in China, Japan and the Russian Federation and a reconnection in Canada) by comparison with 2 connections and 2 re-connections in 2003. Also, in the end of 2004, 26 nuclear power plants were under construction with a total net capacity of 20.8 GW(e). The conclusion accepted by common consent is that the nuclear power is still in progress and represents one of the options for power security on long and middle term. If we refer to the nuclear fusion which will produce commercial electric power, over 30 - 40 years, in practically unlimited quantities, the above underlining becomes even more evident. Fortunately, besides the beneficent characteristics, such as: clean, stable as engendering and price, has also a negative characteristic, which generally breathes fear into the people: radioactive waste. A classification of the radioactive waste is not the target of this presentation. I just want to point that a nuclear power plant produces during the time spent fuel - long life high radioactive, generating heat. Another high radioactive waste have similar characteristics (HLW = High Level Waste) for which reason these two categories of wastes are treated together. The spent fuel and the High Level Waste are interim stored for cooling, for around 50 years, afterwards it is transferred to the final repository where it will be kept for hundreds of years, in the case of an open fuel cycle and this is also the case of Cernavoda NPP. Taking into consideration that the Cernavoda Unit 1 reaches the age of 10 years of commercial running during December 2006, it results that the issue of the final disposal is not such urgent as it looks. The objectives of long term management of radioactive waste are public health and protection of the environment

  4. Search for the maximum efficiency of a ribbed-surfaces device, providing a tight seal

    International Nuclear Information System (INIS)

    Boutin, Jeanne.

    1977-04-01

    The purpose of this experiment was to determine the geometrical characteristics of ribbed surfaces used to equip devices in translation or slow rotation motion and having to form an acceptable seal between slightly viscous fluids. It systematically studies the pressure loss coefficient lambda in function of the different parameters setting the form of ribs and their relative position on the opposite sides. It shows that the passages with two ribbed surfaces lead to highly better results than those with only one, the maximum value of lambda, equal to 0.5, being obtained with the ratios: pitch/clearance = 5, depth of groove/clearance = 1,2, and with their teeth face to face on the two opposite ribbed surfaces. With certain shapes, alternate position of ribs can lead to the maximum of lambda yet lower than 0.5 [fr

  5. The Effects of Audiovisual Stimulation on the Acceptance of Background Noise.

    Science.gov (United States)

    Plyler, Patrick N; Lang, Rowan; Monroe, Amy L; Gaudiano, Paul

    2015-05-01

    Previous examinations of noise acceptance have been conducted using an auditory stimulus only; however, the effect of visual speech supplementation of the auditory stimulus on acceptance of noise remains limited. The purpose of the present study was to determine the effect of audiovisual stimulation on the acceptance of noise in listeners with normal and impaired hearing. A repeated measures design was utilized. A total of 92 adult participants were recruited for this experiment. Of these participants, 54 were listeners with normal hearing and 38 were listeners with sensorineural hearing impairment. Most comfortable levels and acceptable noise levels (ANL) were obtained using auditory and auditory-visual stimulation modes for the unaided listening condition for each participant and for the aided listening condition for 35 of the participants with impaired hearing that owned hearing aids. Speech reading ability was assessed using the Utley test for each participant. The addition of visual input did not impact the most comfortable level values for listeners in either group; however, visual input improved unaided ANL values for listeners with normal hearing and aided ANL values in listeners with impaired hearing. ANL benefit received from visual speech input was related to the auditory ANL in listeners in each group; however, it was not related to speech reading ability for either listener group in any experimental condition. Visual speech input can significantly impact measures of noise acceptance. The current ANL measure may not accurately reflect acceptance of noise values when in more realistic environments, where the signal of interest is both audible and visible to the listener. American Academy of Audiology.

  6. A new approach to hierarchical data analysis: Targeted maximum likelihood estimation for the causal effect of a cluster-level exposure.

    Science.gov (United States)

    Balzer, Laura B; Zheng, Wenjing; van der Laan, Mark J; Petersen, Maya L

    2018-01-01

    We often seek to estimate the impact of an exposure naturally occurring or randomly assigned at the cluster-level. For example, the literature on neighborhood determinants of health continues to grow. Likewise, community randomized trials are applied to learn about real-world implementation, sustainability, and population effects of interventions with proven individual-level efficacy. In these settings, individual-level outcomes are correlated due to shared cluster-level factors, including the exposure, as well as social or biological interactions between individuals. To flexibly and efficiently estimate the effect of a cluster-level exposure, we present two targeted maximum likelihood estimators (TMLEs). The first TMLE is developed under a non-parametric causal model, which allows for arbitrary interactions between individuals within a cluster. These interactions include direct transmission of the outcome (i.e. contagion) and influence of one individual's covariates on another's outcome (i.e. covariate interference). The second TMLE is developed under a causal sub-model assuming the cluster-level and individual-specific covariates are sufficient to control for confounding. Simulations compare the alternative estimators and illustrate the potential gains from pairing individual-level risk factors and outcomes during estimation, while avoiding unwarranted assumptions. Our results suggest that estimation under the sub-model can result in bias and misleading inference in an observational setting. Incorporating working assumptions during estimation is more robust than assuming they hold in the underlying causal model. We illustrate our approach with an application to HIV prevention and treatment.

  7. Capacity Prediction Model Based on Limited Priority Gap-Acceptance Theory at Multilane Roundabouts

    Directory of Open Access Journals (Sweden)

    Zhaowei Qu

    2014-01-01

    Full Text Available Capacity is an important design parameter for roundabouts, and it is the premise of computing their delay and queue. Roundabout capacity has been studied for decades, and empirical regression model and gap-acceptance model are the two main methods to predict it. Based on gap-acceptance theory, by considering the effect of limited priority, especially the relationship between limited priority factor and critical gap, a modified model was built to predict the roundabout capacity. We then compare the results between Raff’s method and maximum likelihood estimation (MLE method, and the MLE method was used to predict the critical gaps. Finally, the predicted capacities from different models were compared, with the observed capacity by field surveys, which verifies the performance of the proposed model.

  8. Nevada Test Site Waste Acceptance Criteria (NTSWAC), Rev. 7-01

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Management

    2009-05-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, Nevada Test Site Waste Acceptance Criteria (NTSWAC). The NTSWAC provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NTSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NTS Area 3 and Area 5 Radioactive Waste Management Complex for disposal.

  9. Nevada Test Site Waste Acceptance Criteria (NTSWAC), Rev. 7-01

    International Nuclear Information System (INIS)

    2009-01-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, Nevada Test Site Waste Acceptance Criteria (NTSWAC). The NTSWAC provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NTSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NTS Area 3 and Area 5 Radioactive Waste Management Complex for disposal.

  10. Feasibility Study on the Development of Index that Shows Social and Cultural Acceptance of Nuclear Power

    Energy Technology Data Exchange (ETDEWEB)

    Cho, SeongKyung [Bangmok College of General Education at Myongji Univ., Yongin (Korea, Republic of); Choi, Seungho; Yoon, Hana; Song, Jiyeon [Domo Brodeur, Seoul (Korea, Republic of)

    2015-05-15

    In this context, it is necessary to manage and develop an index that can measure the level of public acceptance by establishing the terms of social/cultural public acceptance of nuclear power in a practical manner and by identifying influential factors of public acceptance. Developing an index itself is not intended to increase the public acceptance of nuclear power. This study intends to contribute to determining energy policy acceptable to the public by estimating the level of potential social conflicts related to nuclear power policies with eligible evaluation criteria on social/cultural acceptance and by reducing relevant social costs. Key conclusions and proposal of this research are as follows. First, the influential factors of acceptance are reliability of nuclear safety, risk perception of nuclear power and beneficial perception of nuclear power. Among them, reliability of nuclear safety appears to have the most influence. In addition, benefit perception of nuclear power at the social level is significantly higher than that at the individual level. However, in relation to risk perception, a gap between experts and the public is found as nuclear industry premises that accident does not occur while the public premises that accident may occur.

  11. Feasibility Study on the Development of Index that Shows Social and Cultural Acceptance of Nuclear Power

    International Nuclear Information System (INIS)

    Cho, SeongKyung; Choi, Seungho; Yoon, Hana; Song, Jiyeon

    2015-01-01

    In this context, it is necessary to manage and develop an index that can measure the level of public acceptance by establishing the terms of social/cultural public acceptance of nuclear power in a practical manner and by identifying influential factors of public acceptance. Developing an index itself is not intended to increase the public acceptance of nuclear power. This study intends to contribute to determining energy policy acceptable to the public by estimating the level of potential social conflicts related to nuclear power policies with eligible evaluation criteria on social/cultural acceptance and by reducing relevant social costs. Key conclusions and proposal of this research are as follows. First, the influential factors of acceptance are reliability of nuclear safety, risk perception of nuclear power and beneficial perception of nuclear power. Among them, reliability of nuclear safety appears to have the most influence. In addition, benefit perception of nuclear power at the social level is significantly higher than that at the individual level. However, in relation to risk perception, a gap between experts and the public is found as nuclear industry premises that accident does not occur while the public premises that accident may occur

  12. Perceptions of industrial and nuclear risks. Stakes, negotiations and social development of levels of risk acceptance

    International Nuclear Information System (INIS)

    Bernier, S.Ch.

    2007-11-01

    In this thesis we will question the perceptions of industrial risks in the occidental world at the beginning of the 21. century. For this purpose we will try to understand how concepts such as sustainable development, precautionary principle, liability, or even zero-risk bias have progressively developed around a thought model based on the scientific rationality. This model is now undermined by its incapacity to fully address the issues it raises and completely avoid the potential risks. However, despite consistent weaknesses, it remains a reference value moulded by past accidents which have led to the making of laws aiming mainly at defining liability and protecting those who are held liable. Thus, public information becomes a requirement for democracy and the protection of this thought model. In this context, the protagonists at stake are security-conscious, economical and political lobbies that constantly redefine the limits of risk acceptance. We come to the realization that our lifestyle and value system remain unchallenged even though undergoing a crisis. The specificity of this research lies into the importance we give to the local approach, dealing with registered Seveso sites and nuclear plants located in Indre et Loire. We have polled five categories of respondents through interviews or questionnaires in order to understand their opinion regarding situations involving technological risks. The result of this survey helps us understand and set the levels of risk acceptance that they define with regard to the industrial risks and show the complexity of a situation involving political stakes, environmental pressures, a profit-driven economy and security constraints, in a vague and complex context. This work gives us a contrasted picture of today's perceptions of risks. (author)

  13. Nevada test site defense waste acceptance criteria, certification, and transfer requirements

    International Nuclear Information System (INIS)

    1988-10-01

    The Nevada Test Site (NTS) Defense Waste Acceptance Criteria, Certification and Transfer Requirements establishes procedures and criteria for safe transfer, disposal, and storage of defense transuranic, low-level, and mixed waste at the NTS. Included are an overview of the NTS defense waste management program; the NTS waste acceptance criteria for transuranic, low-level, and mixed wastes; waste certification requirements and guidance; application to submit waste; and requirements for waste transfer and receipt. 5 figs., 16 tabs

  14. Barriers to and facilitators of the acceptance process for individuals with serious mental illness.

    Science.gov (United States)

    Mizock, Lauren; Russinova, Zlatka; Millner, Uma Chandrika

    2014-09-01

    The process of acceptance of mental illness is a central component of recovery and has been linked to functioning, illness management, and quality of life. A number of barriers and facilitators have been theorized as impacting this process. This study was conducted with 30 participants with serious mental illness (a major psychiatric disorder with impairment in multiple areas of functioning) to elicit the barriers to and facilitators of the acceptance of mental illness. Grounded theory methodology was utilized to analyze the 30 semistructured interviews. Results revealed barriers to and facilitators of acceptance of mental illness at the micro level (cognitive, emotional, behavioral, identity-related), meso level (relational), and macro level (cultural, systemic). Clinical and research implications are discussed with regard to facilitating acceptance of mental illness. © The Author(s) 2014.

  15. Chronic pain and sex-differences; women accept and move, while men feel blue.

    Directory of Open Access Journals (Sweden)

    Graciela S Rovner

    Full Text Available The aim of this study is to explore differences between male and female patients entering a rehabilitation program at a pain clinic in order to gain a greater understanding of different approaches to be used in rehabilitation.1371 patients referred to a specialty pain rehabilitation clinic, completed sociodemographic and pain related questionnaires. They rated their pain acceptance (CPAQ-8, their kinesiophobia (TSK, the impact of pain in their life (MPI, anxiety and depression levels (HAD and quality of life scales: the SF-36, LiSat-11, and the EQ-5D. Because of the large sample size of the study, the significance level was set at the p ≤.01.Analysis by t-test showed that when both sexes experience the same pain severity, women report significantly higher activity level, pain acceptance and social support while men report higher kinesiophobia, mood disturbances and lower activity level.Pain acceptance (CPAQ-8 and kinesiophobia (TSK showed the clearest differences between men and women. Pain acceptance and kinesiophobia are behaviorally defined and have the potential to be changed.

  16. Acceptability, acceptance and decision making

    International Nuclear Information System (INIS)

    Ackerschott, H.

    2002-01-01

    There is a fundamental difference between the acceptability of a civilizatory or societal risk and the acceptability of the decision-making process that leads to a civilizatory or societal risk. The analysis of individual risk decisions - regarding who, executes when which indisputably hazardous, unhealthy or dangerous behaviour under which circumstances - is not helpful in finding solutions for the political decisions at hand in Germany concerning nuclear energy in particular or energy in general. The debt for implementation of any technology, in the sense of making the technology a success in terms of broad acceptance and general utilisation, lies with the particular industry involved. Regardless of the technology, innovation research identifies the implementation phase as most critical to the success of any innovation. In this sense, nuclear technology is at best still an innovation, because the implementation has not yet been completed. Fear and opposition to innovation are ubiquitous. Even the economy - which is often described as 'rational' - is full of this resistance. Innovation has an impact on the pivotal point between stability, the presupposition for the successful execution of decisions already taken and instability, which includes insecurity, but is also necessary for the success of further development. By definition, innovations are beyond our sphere of experience; not at the level of reliability and trust yet to come. Yet they are evaluated via the simplifying heuristics for making decisions proven not only to be necessary and useful, but also accurate in the familiar. The 'settlement of the debt of implementation', the accompanying communication, the decision-making procedures concerning the regulation of averse effects of the technology, but also the tailoring of the new technology or service itself must be directed to appropriate target groups. But the group often aimed at in the nuclear debate, the group, which largely determines political

  17. [The self-acceptance and the acceptance of the parents by patients with anorexia nervosa].

    Science.gov (United States)

    Pawłowska, Beata; Chuchra, Maria

    2004-01-01

    The aim of this work is to describe the relationship between self-esteem and characteristics of self image and acceptance of parents and the characteristics of their images in the perception of patients with anorexia nervosa. The test group consisted of 30 patients diagnosed with anorexia nervosa undergoing a treatment in the Department of Psychiatry of the Medical Academy in Lublin. The average age of the examined patients was 20 years. All patients had secondary education. In my work the ACL Gough and Heilbrun Adjectival Test was used which was completed by the examined women three times following the instruction: "I am", "my mother is", "my father is". As a result the actual images of the patients as well as of their mothers and fathers were obtained. The esteem rates were calculated by comparing the number of positive adjectives to the number of negative adjectives used by the patients to evaluate individual persons. The interdependencies between esteem rates and the characteristics of the actual images of these persons were determined based on the r-Pearson correlation. The results obtained indicated the existence of crucial statistic dependencies between the variables analysed and constituted the basis for the formulation of the following conclusions: 1. Patients are characterised by a low self-esteem and a low acceptance level of their parents. They accept their fathers in the smallest degree, compared to that their self-esteem is higher and the acceptance of their mothers is the highest. 2. Self-esteem is related in a significant way to the characteristics of self image such as: sense of responsibility, autonomy, ability to accomplish life objectives and establishing close relationships with other people. 3. The acceptance of their mothers is related to the characteristics typical of them such as: protectiveness, ability to establish and maintain positive interpersonal relationships, empathy and understanding the motives of their own behaviour and those of

  18. Determination Public Acceptance Segmentation for Nuclear Power Program Interest

    International Nuclear Information System (INIS)

    Syirrazie Che Soh; Aini Wahidah Abdul Wahab

    2012-01-01

    This paper is focus to discuss segmentation aspect among inter-disciplinary group of public. This discussion is the pre-stage to ensure the right initiative strategies are implemented to gain public interest and acceptance towards on developing nuclear power plant. The applied strategies are implemented based on different interest among the different groups of public. These strategies may increase public acceptance level towards developing nuclear power plant. (author)

  19. Acceptance of disease and the quality of life in patients with enteric stoma.

    Science.gov (United States)

    Szpilewska, Katarzyna; Juzwiszyn, Jan; Bolanowska, Zofia; Bolanowska, Zofia; Milan, Magdalena; Chabowski, Mariusz; Janczak, Dariusz

    2018-02-28

    The main reason of the emergence of enteric stoma is colorectal cancer. Enteric stoma is a serious health, as well as life problem. In Poland, there are about 6,000 stoma surgeries yearly. It changes the functioning of patients, restricts their daily activity and influences their quality of life significantly. Therefore, in the modern treatment process, all spheres of human life and its surroundings are considered. The evaluation of the quality of life and the level of acceptance of the disease enables us to identify the regions in which patients require attention and help, as well as places to which health promotion among patients with a stoma should be directed. The aim of the study was the evaluation of the acceptance of the disease and the quality of life in patients with colostomy. The study conducted between February 2015 and February 2016 included101 patients with enteric stoma of the Provincial Specialist Hospital in Wrocław at Kamieńskiego St. in the departments of General Surgery with the Subdivision of Traumatology and Orthopedic Surgery, Subdivision of Metabolic Surgery, Subdivision of Endocrine Surgery and Oncological Surgery . Two anonymous questionnaires, i.e., health-related quality of life (HRQoL) and acceptance of illness scale (AIS), were used. 60% (61 people) were women, and 40% (40 people) were men. The mean age was 48; the youngest respondent was 20 years old, and the oldest was 79 years old. 17% of the respondents had primary education, 25% - vocational, 33% - secondary and 26% - university-level. The most common reason for the emergence of a stoma among the respondents was colon cancer (44%), followed by: mechanical bowel onstruction (26%), intestinal damage following injuries (25%), inflammatory bowel disease (6%). The quality of life of patients with colostomy was evaluated in view of their health condition, postoperative recovery, everyday limitations, and self-evaluation. The majority of participants pointed to the deterioration of

  20. The Relationship Between Maximum Isometric Strength and Ball Velocity in the Tennis Serve.

    Science.gov (United States)

    Baiget, Ernest; Corbi, Francisco; Fuentes, Juan Pedro; Fernández-Fernández, Jaime

    2016-12-01

    The aims of this study were to analyze the relationship between maximum isometric strength levels in different upper and lower limb joints and serve velocity in competitive tennis players as well as to develop a prediction model based on this information. Twelve male competitive tennis players (mean ± SD; age: 17.2 ± 1.0 years; body height: 180.1 ± 6.2 cm; body mass: 71.9 ± 5.6 kg) were tested using maximum isometric strength levels (i.e., wrist, elbow and shoulder flexion and extension; leg and back extension; shoulder external and internal rotation). Serve velocity was measured using a radar gun. Results showed a strong positive relationship between serve velocity and shoulder internal rotation (r = 0.67; p isometric strength level in shoulder internal rotation was strongly related to serve velocity, and a large part of the variability in serve velocity was explained by the maximum isometric strength levels in shoulder internal rotation and shoulder flexion.

  1. Acceptability of Canistel (Lacuma Nervosa A.DC Fruit Flour in Making Cookies

    Directory of Open Access Journals (Sweden)

    Delia A. Paragados

    2014-02-01

    Full Text Available This experimental research determined the acceptability in terms of appearance, aroma, texture, flavor and general acceptability of canistel (Lacuma nervosa A. DC fruit flour in different proportions in making cookies. This study was conducted in December 2011 at West Visayas State University – Calinog Campus, Calinog, Iloilo. Five treatments were used in the study – four of them utilized canistel fruit flour at various proportions and one treatment was used as the control group which utilized all purpose flour. The respondents of the study were the 15 faculty and staff, 15 Food Technology and BSHRM students of WVSU - Calinog Campus, and 15 housewives at Brgy. Simsiman, Calinog, Iloilo who were selected through purposive sampling. The respondents evaluated the finished products using a modified sensory evaluation score sheet based on Five Point Hedonic Scale. There were five treatments replicated three times. The statistical tools used were the means, standard deviation, One – Way Analysis of Variance, and the LSD. The .01 alpha level was used as the criterion for acceptance or rejection of the null hypotheses. The study revealed that cookies prepared using all treatments were “liked very much” in terms of appearance, aroma, texture, flavor and general acceptability. While cookies with 100% all - purpose flour were liked moderately by the evaluators. These results led to the conclusion that there is a significant difference that existed in the level of acceptability of canistel fruit flour in making cookies in terms of aroma, texture, flavor and general acceptability, therefore the null hypothesis is rejected. However, no significant difference in the level of acceptability of canistel fruit flour in making cookies in terms of appearance, therefore the null hypothesis is accepted.

  2. How acceptable has become tolerable

    International Nuclear Information System (INIS)

    Clarke, R.H.

    1989-01-01

    A brief article discusses the differing conclusions drawn by the Royal Society Study Group and the Health and Safety Executive on the acceptability of the level of annual risk of death to the individual due to radiation. Regarding occupational exposure, both groups arrived at the same figure of 1 in 1000 per year but the former group considered this to be 'hardly totally unacceptable' while the latter group considered this to be 'borderline of intolerable'. Regarding exposure of the members of the public, the levels of risk concluded from both groups were even more divergent. (U.K.)

  3. Maximum Range of a Projectile Thrown from Constant-Speed Circular Motion

    Science.gov (United States)

    Poljak, Nikola

    2016-01-01

    The problem of determining the angle ? at which a point mass launched from ground level with a given speed v[subscript 0] will reach a maximum distance is a standard exercise in mechanics. There are many possible ways of solving this problem, leading to the well-known answer of ? = p/4, producing a maximum range of D[subscript max] = v[superscript…

  4. Maximum Recommended Dosage of Lithium for Pregnant Women Based on a PBPK Model for Lithium Absorption

    Directory of Open Access Journals (Sweden)

    Scott Horton

    2012-01-01

    Full Text Available Treatment of bipolar disorder with lithium therapy during pregnancy is a medical challenge. Bipolar disorder is more prevalent in women and its onset is often concurrent with peak reproductive age. Treatment typically involves administration of the element lithium, which has been classified as a class D drug (legal to use during pregnancy, but may cause birth defects and is one of only thirty known teratogenic drugs. There is no clear recommendation in the literature on the maximum acceptable dosage regimen for pregnant, bipolar women. We recommend a maximum dosage regimen based on a physiologically based pharmacokinetic (PBPK model. The model simulates the concentration of lithium in the organs and tissues of a pregnant woman and her fetus. First, we modeled time-dependent lithium concentration profiles resulting from lithium therapy known to have caused birth defects. Next, we identified maximum and average fetal lithium concentrations during treatment. Then, we developed a lithium therapy regimen to maximize the concentration of lithium in the mother’s brain, while maintaining the fetal concentration low enough to reduce the risk of birth defects. This maximum dosage regimen suggested by the model was 400 mg lithium three times per day.

  5. Space augmentation of military high-level waste disposal

    International Nuclear Information System (INIS)

    English, T.; Lees, L.; Divita, E.

    1979-01-01

    Space disposal of selected components of military high-level waste (HLW) is considered. This disposal option offers the promise of eliminating the long-lived radionuclides in military HLW from the earth. A space mission which meets the dual requirements of long-term orbital stability and a maximum of one space shuttle launch per week over a period of 20-40 years, is a heliocentric orbit about halfway between the orbits of earth and Venus. Space disposal of high-level radioactive waste is characterized by long-term predicability and short-term uncertainties which must be reduced to acceptably low levels. For example, failure of either the Orbit Transfer Vehicle after leaving low earth orbit, or the storable propellant stage failure at perihelion would leave the nuclear waste package in an unplanned and potentially unstable orbit. Since potential earth reencounter and subsequent burn-up in the earth's atmosphere is unacceptable, a deep space rendezvous, docking, and retrieval capability must be developed

  6. Acceptance sampling using judgmental and randomly selected samples

    Energy Technology Data Exchange (ETDEWEB)

    Sego, Landon H.; Shulman, Stanley A.; Anderson, Kevin K.; Wilson, John E.; Pulsipher, Brent A.; Sieber, W. Karl

    2010-09-01

    We present a Bayesian model for acceptance sampling where the population consists of two groups, each with different levels of risk of containing unacceptable items. Expert opinion, or judgment, may be required to distinguish between the high and low-risk groups. Hence, high-risk items are likely to be identifed (and sampled) using expert judgment, while the remaining low-risk items are sampled randomly. We focus on the situation where all observed samples must be acceptable. Consequently, the objective of the statistical inference is to quantify the probability that a large percentage of the unsampled items in the population are also acceptable. We demonstrate that traditional (frequentist) acceptance sampling and simpler Bayesian formulations of the problem are essentially special cases of the proposed model. We explore the properties of the model in detail, and discuss the conditions necessary to ensure that required samples sizes are non-decreasing function of the population size. The method is applicable to a variety of acceptance sampling problems, and, in particular, to environmental sampling where the objective is to demonstrate the safety of reoccupying a remediated facility that has been contaminated with a lethal agent.

  7. Maximum power point tracking for photovoltaic applications by using two-level DC/DC boost converter

    Science.gov (United States)

    Moamaei, Parvin

    Recently, photovoltaic (PV) generation is becoming increasingly popular in industrial applications. As a renewable and alternative source of energy they feature superior characteristics such as being clean and silent along with less maintenance problems compared to other sources of the energy. In PV generation, employing a Maximum Power Point Tracking (MPPT) method is essential to obtain the maximum available solar energy. Among several proposed MPPT techniques, the Perturbation and Observation (P&O;) and Model Predictive Control (MPC) methods are adopted in this work. The components of the MPPT control system which are P&O; and MPC algorithms, PV module and high gain DC-DC boost converter are simulated in MATLAB Simulink. They are evaluated theoretically under rapidly and slowly changing of solar irradiation and temperature and their performance is shown by the simulation results, finally a comprehensive comparison is presented.

  8. Bridging the Gap between Social Acceptance and Ethical Acceptability

    NARCIS (Netherlands)

    Taebi, B.

    2016-01-01

    New technology brings great benefits, but it can also create new and significant risks. When evaluating those risks in policymaking, there is a tendency to focus on social acceptance. By solely focusing on social acceptance, we could, however, overlook important ethical aspects of technological

  9. Video Game Acceptance: A Meta-Analysis of the Extended Technology Acceptance Model.

    Science.gov (United States)

    Wang, Xiaohui; Goh, Dion Hoe-Lian

    2017-11-01

    The current study systematically reviews and summarizes the existing literature of game acceptance, identifies the core determinants, and evaluates the strength of the relationships in the extended technology acceptance model. Moreover, this study segments video games into two categories: hedonic and utilitarian and examines player acceptance of these two types separately. Through a meta-analysis of 50 articles, we find that perceived ease of use (PEOU), perceived usefulness (PU), and perceived enjoyment (PE) significantly associate with attitude and behavioral intention. PE is the dominant predictor of hedonic game acceptance, while PEOU and PU are the main determinants of utilitarian game acceptance. Furthermore, we find that respondent type and game platform are significant moderators. Findings of this study provide critical insights into the phenomenon of game acceptance and suggest directions for future research.

  10. WHOLEheart study participant acceptance of wholegrain foods.

    Science.gov (United States)

    Kuznesof, Sharron; Brownlee, Iain A; Moore, Carmel; Richardson, David P; Jebb, Susan A; Seal, Chris J

    2012-08-01

    This qualitative study explored the concept of acceptance of wholegrain foods in an adult population in the UK. Data was generated via focus groups with volunteers from a randomised controlled wholegrain based dietary intervention study (the WHOLEheart study). WHOLEheart volunteers, who did not habitually eat wholegrain foods, were randomised to one of three experimental regimes: (1) incorporating 60 g/day whole grains into the diet for 16 weeks; (2) incorporating 60 g/day whole grains into the diet for 8 weeks, doubling to 120 g/day for the following 8 weeks; (3) a control group. Focus groups to examine factors relating to whole grain acceptability were held one month post-intervention. For participants incorporating whole grains into their diet, acceptance was dependent upon: (a) 'trial acceptance', relating to the taste, preparation and perceived impact of the wholegrain foods on wellbeing, and (b) 'dietary acceptance' which involved the compatibility and substitutability of whole grains with existing ingredients and meal patterns. Barriers to sustained intake included family taste preferences, cooking skills, price and availability of wholegrain foods. Although LDL lowering benefits of eating whole grains provided the impetus for the WHOLEheart study, participants' self-reported benefits of eating wholegrain foods included perceived naturalness, high fibre content, superior taste, improved satiety and increased energy levels provided a stronger rationale for eating whole grains. Copyright © 2012 Elsevier Ltd. All rights reserved.

  11. Factors that influence consumers' acceptance of future energy systems : the effects of adjustment type, production level, and price

    NARCIS (Netherlands)

    Leijten, Fenna R. M.; Bolderdijk, Jan Willem; Keizer, Kees; Gorsira, Madelijne; van der Werff, Ellen; Steg, Linda

    2014-01-01

    To promote the successful introduction of sustainable energy systems, more insight is needed into factors influencing consumer's acceptance of future energy systems. A questionnaire study among 139 Dutch citizens (aged 18-85) was conducted. Participants rated the acceptability of energy systems made

  12. Acceptance test guideline for steam turbine control systems. Anahmerichtlinie fuer Regel- und Steuereinrichtungen von Dampfturbinen

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    The acceptances to be obtained during the first operational run, refer to measures proving the functional integrity of the turbine control system and assuring the compliance with the maximum allowable overspeed in case of lead changes or perturbations. The Guideline concerns essentially speed, power, and pressure controllers coupled to generators. It may be appropriately extended to steam turbines serving other purposes.

  13. Constructing valid density matrices on an NMR quantum information processor via maximum likelihood estimation

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Harpreet; Arvind; Dorai, Kavita, E-mail: kavita@iisermohali.ac.in

    2016-09-07

    Estimation of quantum states is an important step in any quantum information processing experiment. A naive reconstruction of the density matrix from experimental measurements can often give density matrices which are not positive, and hence not physically acceptable. How do we ensure that at all stages of reconstruction, we keep the density matrix positive? Recently a method has been suggested based on maximum likelihood estimation, wherein the density matrix is guaranteed to be positive definite. We experimentally implement this protocol on an NMR quantum information processor. We discuss several examples and compare with the standard method of state estimation. - Highlights: • State estimation using maximum likelihood method was performed on an NMR quantum information processor. • Physically valid density matrices were obtained every time in contrast to standard quantum state tomography. • Density matrices of several different entangled and separable states were reconstructed for two and three qubits.

  14. International Emissions Trading : Design and Political Acceptability

    NARCIS (Netherlands)

    Boom, Jan Tjeerd

    2006-01-01

    This thesis discusses the design and political acceptability of international emissions trading. It is shown that there are several designs options for emissions trading at the national level that have a different impact on output and thereby related factors such as employment and consumer prices.

  15. Factors Related to Medicaid Payment Acceptance at Outpatient Substance Abuse Treatment Programs

    Science.gov (United States)

    Terry-McElrath, Yvonne M; Chriqui, Jamie F; McBride, Duane C

    2011-01-01

    Objective To examine factors associated with Medicaid acceptance for substance abuse (SA) services by outpatient SA treatment programs. Data Sources Secondary analysis of 2003–2006 National Survey of Substance Abuse Treatment Services data combined with state Medicaid policy and usage measures and other publicly available data. Study Design We used cross-sectional analyses, including state fixed effects, to assess relationships between SA treatment program Medicaid acceptance and (1) program-level factors, (2) county-level sociodemographics and treatment program density, and (3) state-level population characteristics, SA treatment-related factors, and Medicaid policy and usage. Data Extraction Methods State Medicaid policy data were compiled based on reviews of state Medicaid-related statutes/regulations and Medicaid plans. Other data were publicly available. Principal Findings Medicaid acceptance was significantly higher for programs: (a) that were publicly funded and in states with Medicaid policy allowing SA treatment coverage; (b) with accreditation/licensure and nonprofit/government ownership, as well as mental- and general-health focused programs; and (c) in counties with lower household income. Conclusions SA treatment program Medicaid acceptance related to program-, county, and state-level factors. The data suggest the importance of state policy and licensure/accreditation requirements in increasing SA program Medicaid access. PMID:21105870

  16. Quantifying HER-2 expression on circulating tumor cells by ACCEPT.

    Directory of Open Access Journals (Sweden)

    Leonie Zeune

    Full Text Available Circulating tumor cells (CTCs isolated from blood can be probed for the expression of treatment targets. Immunofluorescence is often used for both the enumeration of CTC and the determination of protein expression levels related to treatment targets. Accurate and reproducible assessment of such treatment target expression levels is essential for their use in the clinic. To enable this, an open source image analysis program named ACCEPT was developed in the EU-FP7 CTCTrap and CANCER-ID programs. Here its application is shown on a retrospective cohort of 132 metastatic breast cancer patients from which blood samples were processed by CellSearch® and stained for HER-2 expression as additional marker. Images were digitally stored and reviewers identified a total of 4084 CTCs. CTC's HER-2 expression was determined in the thumbnail images by ACCEPT. 150 of these images were selected and sent to six independent investigators to score the HER-2 expression with and without ACCEPT. Concordance rate of the operators' scoring results for HER-2 on CTCs was 30% and could be increased using the ACCEPT tool to 51%. Automated assessment of HER-2 expression by ACCEPT on 4084 CTCs of 132 patients showed 8 (6.1% patients with all CTCs expressing HER-2, 14 (10.6% patients with no CTC expressing HER-2 and 110 (83.3% patients with CTCs showing a varying HER-2 expression level. In total 1576 CTCs were determined HER-2 positive. We conclude that the use of image analysis enables a more reproducible quantification of treatment targets on CTCs and leads the way to fully automated and reproducible approaches.

  17. Quantifying HER-2 expression on circulating tumor cells by ACCEPT.

    Science.gov (United States)

    Zeune, Leonie; van Dalum, Guus; Decraene, Charles; Proudhon, Charlotte; Fehm, Tanja; Neubauer, Hans; Rack, Brigitte; Alunni-Fabbroni, Marianna; Terstappen, Leon W M M; van Gils, Stephan A; Brune, Christoph

    2017-01-01

    Circulating tumor cells (CTCs) isolated from blood can be probed for the expression of treatment targets. Immunofluorescence is often used for both the enumeration of CTC and the determination of protein expression levels related to treatment targets. Accurate and reproducible assessment of such treatment target expression levels is essential for their use in the clinic. To enable this, an open source image analysis program named ACCEPT was developed in the EU-FP7 CTCTrap and CANCER-ID programs. Here its application is shown on a retrospective cohort of 132 metastatic breast cancer patients from which blood samples were processed by CellSearch® and stained for HER-2 expression as additional marker. Images were digitally stored and reviewers identified a total of 4084 CTCs. CTC's HER-2 expression was determined in the thumbnail images by ACCEPT. 150 of these images were selected and sent to six independent investigators to score the HER-2 expression with and without ACCEPT. Concordance rate of the operators' scoring results for HER-2 on CTCs was 30% and could be increased using the ACCEPT tool to 51%. Automated assessment of HER-2 expression by ACCEPT on 4084 CTCs of 132 patients showed 8 (6.1%) patients with all CTCs expressing HER-2, 14 (10.6%) patients with no CTC expressing HER-2 and 110 (83.3%) patients with CTCs showing a varying HER-2 expression level. In total 1576 CTCs were determined HER-2 positive. We conclude that the use of image analysis enables a more reproducible quantification of treatment targets on CTCs and leads the way to fully automated and reproducible approaches.

  18. Public acceptance activities by the Rokkasho project

    International Nuclear Information System (INIS)

    Ushida, Yasunori

    1993-01-01

    Japan Nuclear Fuel Limited, incorporated by mainly ten Japanese utilities, engages in constructing and operating nuclear fuel cycle facilities such as reprocessing, uranium enrichment and low level radioactive waste disposal at Rokkasho village in Aomori prefecture, 600 kilometers north of Tokyo, where is the most northern part of Honshu island. This presentation deals with the situation concerning the Rokkasho project and our public acceptance activities. The expansion of anti nuclear movement was spread not only Aomori prefecture but also all over Japan, affected strongly by the Chernobyl accident. In 1988,16 anti-nuclear groups including labor-union organized a committee for the purpose of a campaign to collect signatures for opposing nuclear fuel cycle facilities. Those groups brought in a lawsuit against the Japan Nuclear Fuel Limited, for stopping the construction of enrichment plant. Facing furious anti nuclear fuel cycle movements in Aomori prefecture, the Federation of Electric Power Companies decided to re strengthen the public acceptance activities and established the Nuclear Fuel Joint head office together with Japan Nuclear Fuel Service Co.and Japan Nuclear Fuel Industry Co. To this new organization many excellent members were dispatched from all electric power companies. The target area for public acceptance activities expanded from the surrounding area to all area of Aomori prefecture. The first policy of public acceptance activities is 'Appealing by face to face' which means the direct personal contact with people being anxious about nuclear fuel cycle facilities. The second main policy is 'Seeing the plant itself is better than persuading orally.' Survey conducted by a newspaper company in respect with the public acceptance of Rokkasho project in July 1989 July 1992 showed a favorable change of the public acceptance. However, one also has to recognize that most of people still have anxiety about the nuclear fuel cycle facilities and we shall

  19. Acceptance criteria for radioactive waste deposition

    International Nuclear Information System (INIS)

    Rzyski, B.M.

    1989-01-01

    The disposal of low-and intermediate level radioactive waste in either shallow ground or rock cavities must be subjected to special guidelines which are used by national authorities and implementing bodies when establishing and regulating respositories. These informations are given by the acceptance criteria and will depend on specific site conditions and optmized procedures. (author) [pt

  20. Religion and suicide acceptability: a cross-national analysis.

    Science.gov (United States)

    Stack, Steven; Kposowa, Augustine J

    2011-01-01

    Four perspectives (moral community thesis, religious integration, religious commitment, and social networks) guide the selection of variables in this study. Data are from the combined World Values/European Values Surveys for 2000 (50,547 individuals nested in 56 nations). The results of a multivariate hierarchical linear model support all four perspectives. Persons residing in nations with relatively high levels of religiosity, who are affiliated with one of four major faiths, are religiously committed, and are engaged with a religious network are found to be lower in suicide acceptability. The religious integration perspective, in particular, is empirically supported; affiliation with Islam is associated with low suicide acceptability. The findings provide strong support for an integrated model and demonstrate the usefulness of the moral community thesis in understanding suicide acceptability.

  1. How Smog Awareness Influences Public Acceptance of Congestion Charge Policies

    Directory of Open Access Journals (Sweden)

    Lingyi Zhou

    2017-09-01

    Full Text Available Although various studies have investigated public acceptance of congestion charge policies, most of them have focused on behavioral and policy-related factors, and did not consider the moderating influence that individual concern about smog and perceived smog risk may have on public acceptance. This paper takes the congestion charge policy in China, targeted at smog and traffic control, and checks how smog awareness—including smog concerns and perceived smog risks, besides behavioral and policy-related factors—might influence public acceptance of the policy. In this paper, we found both a direct and moderating causal relationship between smog awareness and public acceptance. Based on a sample of 574 valid questionnaires in Beijing and Shanghai in 2016, an ordered logistic regression modeling approach was used to delineate the causality between smog awareness and public acceptance. We found that both smog concerns, such as perceived smog risk, and willingness to pay (WTP were both directly and indirectly positively correlated with public acceptance. These findings imply that policymakers should increase policy fairness with environmental-oriented policy design and should express potential policy effectiveness of the smog controlling policy to citizens to increase their acceptance level.

  2. Acceptance-based behavior therapy to promote HIV medication adherence.

    Science.gov (United States)

    Moitra, Ethan; Herbert, James D; Forman, Evan M

    2011-12-01

    A significant number of adults with HIV in the USA do not maintain adherence to highly active antiretroviral therapy (HAART) at adequate levels. Although traditional cognitive behavioral interventions have shown promise in promoting HAART adherence, acceptance-based behavior therapy (ABBT) may be particularly useful in this population. ABBT has the potential to overcome common avoidance-based barriers associated with poor adherence, including denial of various illness-related factors and avoidance of stigmatization. We describe the rationale for promoting psychological and behavioral acceptance in HIV-positive populations; outline an ABBT to promote HAART adherence targeting primary care patients from urban, minority, low socioeconomic backgrounds; and report preliminary qualitative observations of treatment feasibility and acceptability.

  3. International Emission Trading Systems: Trade Level and Political Acceptability

    DEFF Research Database (Denmark)

    Boom, J-T.; Svendsen, Gert Tinggaard

    1999-01-01

    , at the international level, industrial lobbyism was non-significant. Only the 'fossil fuel lobby' played a role. Third, at the national level, one could expect strong political opposition from industry lobbies in case quotas are actually to be distributed at firm level. But trade among countries may benefit industry...

  4. Offer and Acceptance of Apology in Victim-Offender Mediation

    OpenAIRE

    Dhami, MK; Dhami, MK

    2012-01-01

    Past research on restorative justice (RJ) has highlighted the importance of apology for both victims and offenders and the prevalence of apology during the RJ process. The present study moves this work further by examining the nature of the apologies that are offered during victim-offender mediation, as well as the individual-, case-, and mediation-level factors that can affect the offer and acceptance of apology. In addition, we measure the implications that the offer and acceptance of apolo...

  5. In acceptance we trust? Conceptualising acceptance as a viable approach to NGO security management.

    Science.gov (United States)

    Fast, Larissa A; Freeman, C Faith; O'Neill, Michael; Rowley, Elizabeth

    2013-04-01

    This paper documents current understanding of acceptance as a security management approach and explores issues and challenges non-governmental organisations (NGOs) confront when implementing an acceptance approach to security management. It argues that the failure of organisations to systematise and clearly articulate acceptance as a distinct security management approach and a lack of organisational policies and procedures concerning acceptance hinder its efficacy as a security management approach. The paper identifies key and cross-cutting components of acceptance that are critical to its effective implementation in order to advance a comprehensive and systematic concept of acceptance. The key components of acceptance illustrate how organisational and staff functions affect positively or negatively an organisation's acceptance, and include: an organisation's principles and mission, communications, negotiation, programming, relationships and networks, stakeholder and context analysis, staffing, and image. The paper contends that acceptance is linked not only to good programming, but also to overall organisational management and structures. © 2013 The Author(s). Journal compilation © Overseas Development Institute, 2013.

  6. Acceptance Test Report for the 241-AN-107 Enraf Advanced Technology Gauges

    International Nuclear Information System (INIS)

    Dowell, J.L.; Enderlin, V.R.

    1995-06-01

    This Acceptance Test Report covers the results of the execution of the Acceptance Test Procedure for the 241-AN-107 Enraf Advanced Technology Gauges. The test verified the proper operation of the gauges to measure waste density and level in the 241-AN-107 tank

  7. Acceptance test report, 241-SY-101 Flexible Receiver System, Phase 2 testing

    International Nuclear Information System (INIS)

    Ritter, G.A.

    1995-01-01

    This document summarizes the results of the Phase 2 acceptance test of the 241-SY-101 Flexible Receiver System (FRS). The FRS is one of six major components of the Equipment Removal System, which has been designed to retrieve, transport, and store the test mixer pump currently installed in Tank 241-SY-101. The purpose of this acceptance test is to verify the strength of the containment bag and bag bottom cinching mechanism. It is postulated that 68 gallons of waste could be trapped inside the pump internals. The bag must be capable of supporting this waste if it shakes loose and drains to the bottom of the bag after the bag bottom has been cinched closed. This acceptance test was performed at the Maintenance and Storage Facility (MASF) Facility in the 400 area on January 23, 1995. The bag assembly supported the weight of 920 kg (2,020 lbs) of water with no leakage or damage to the bag. This value meets the acceptance criteria of 910 kg of water and therefore the results were found to be acceptable. The maximum volume of liquid expected to be held up in the pump internals is 258 L (68 gallons), which corresponds to 410 kg. This test weight gives just over a safety factor of 2. The bag also supported a small shock load while it was filled with water when the crane hoisted the bag assembly up and down. Based on the strength rating of the bag components, the bag assembly should support 2--3 times the test weight of 910 kg

  8. GRAP, Gamma-Ray Level-Scheme Assignment

    International Nuclear Information System (INIS)

    Franklyn, C.B.

    2002-01-01

    1 - Description of program or function: An interactive program for allocating gamma-rays to an energy level scheme. Procedure allows for searching for new candidate levels of the form: 1) L1 + G(A) + G(B) = L2; 2) G(A) + G(B) = G(C); 3) G(A) + G(B) = C (C is a user defined number); 4) L1 + G(A) + G(B) + G(C) = L2. Procedure indicates intensity balance of feed and decay of each energy level. Provides for optimization of a level energy (and associated error). Overall procedure allows for pre-defining of certain gamma-rays as belonging to particular regions of the level scheme, for example, high energy transition levels, or due to beta- decay. 2 - Method of solution: Search for cases in which the energy difference between two energy levels is equal to a gamma-ray energy within user-defined limits. 3 - Restrictions on the complexity of the problem: Maximum number of gamma-rays: 999; Maximum gamma ray energy: 32000 units; Minimum gamma ray energy: 10 units; Maximum gamma-ray intensity: 32000 units; Minimum gamma-ray intensity: 0.001 units; Maximum number of levels: 255; Maximum level energy: 32000 units; Minimum level energy: 10 units; Maximum error on energy, intensity: 32 units; Minimum error on energy, intensity: 0.001 units; Maximum number of combinations: 6400 (ca); Maximum number of gamma-ray types : 127

  9. Changes in the Global Hydrological Cycle: Lessons from Modeling Lake Levels at the Last Glacial Maximum

    Science.gov (United States)

    Lowry, D. P.; Morrill, C.

    2011-12-01

    Geologic evidence shows that lake levels in currently arid regions were higher and lakes in currently wet regions were lower during the Last Glacial Maximum (LGM). Current hypotheses used to explain these lake level changes include the thermodynamic hypothesis, in which decreased tropospheric water vapor coupled with patterns of convergence and divergence caused dry areas to become more wet and vice versa, the dynamic hypothesis, in which shifts in the jet stream and Inter-Tropical Convergence Zone (ITCZ) altered precipitation patterns, and the evaporation hypothesis, in which lake expansions are attributed to reduced evaporation in a colder climate. This modeling study uses the output of four climate models participating in phase 2 of the Paleoclimate Modeling Intercomparison Project (PMIP2) as input into a lake energy-balance model, in order to test the accuracy of the models and understand the causes of lake level changes. We model five lakes which include the Great Basin lakes, USA; Lake Petén Itzá, Guatemala; Lake Caçó, northern Brazil; Lake Tauca (Titicaca), Bolivia and Peru; and Lake Cari-Laufquen, Argentina. These lakes create a transect through the drylands of North America through the tropics and to the drylands of South America. The models accurately recreate LGM conditions in 14 out of 20 simulations, with the Great Basin lakes being the most robust and Lake Caçó being the least robust, due to model biases in portraying the ITCZ over South America. An analysis of the atmospheric moisture budget from one of the climate models shows that thermodynamic processes contribute most significantly to precipitation changes over the Great Basin, while dynamic processes are most significant for the other lakes. Lake Cari-Laufquen shows a lake expansion that is most likely attributed to reduced evaporation rather than changes in regional precipitation, suggesting that lake levels alone may not be the best indicator of how much precipitation this region

  10. An Analysis of Technology Acceptance in Turkey using Fuzzy Logic and Structural Equation Modelling

    Directory of Open Access Journals (Sweden)

    Bilgin Şenel

    2011-12-01

    Full Text Available Technology is in a constant progress in the way of satisfying increasing human needs. This fact will hold true for the years to come. However, the level of adaptation to technological advancements varies greatly across countries. The pace of adjustment is directly proportional to the importance attached to and the funds allocated for this purpose. Despite the abundance of technological investments in Turkey in recent years, there are only a few studies analyzing the current level of individual interest in technology. This study therefore aims to determine the technology acceptance of Turkish people by using the Technology Acceptance Model (TAM developed by Davis (1989 and to demonstrate the reasons to accept or not accept technology departing from the links between dimensions. While accomplishing this aim, Structural Equation Model (SEM that is a highly strong multivariable analysis technique that makes possible the evaluation of latent structures like psychosocial needs, and the Fuzzy Logic Theorem that provides strong and significant instruments for the measurement of ambiguities and provides the opportunity to meaningfully represent ambiguous concepts expressed in the natural language were used. According to the findings of this study, it was determined that the perceived ease of use is more influential in people’s acceptance of technology than the perceived usefulness is. It was also found that technology acceptance does not differ significantly at the statistical significance level of 0.05 with respect to the participants’ demographic characteristics (age, gender, education level, hometown etc.. In addition, analyses performed to define the relationships between the dimensions of the TAM yielded results that highly supported the TAM. In other words, the dimensions affect technology acceptance to positive and significant degrees

  11. Cosmic shear measurement with maximum likelihood and maximum a posteriori inference

    Science.gov (United States)

    Hall, Alex; Taylor, Andy

    2017-06-01

    We investigate the problem of noise bias in maximum likelihood and maximum a posteriori estimators for cosmic shear. We derive the leading and next-to-leading order biases and compute them in the context of galaxy ellipticity measurements, extending previous work on maximum likelihood inference for weak lensing. We show that a large part of the bias on these point estimators can be removed using information already contained in the likelihood when a galaxy model is specified, without the need for external calibration. We test these bias-corrected estimators on simulated galaxy images similar to those expected from planned space-based weak lensing surveys, with promising results. We find that the introduction of an intrinsic shape prior can help with mitigation of noise bias, such that the maximum a posteriori estimate can be made less biased than the maximum likelihood estimate. Second-order terms offer a check on the convergence of the estimators, but are largely subdominant. We show how biases propagate to shear estimates, demonstrating in our simple set-up that shear biases can be reduced by orders of magnitude and potentially to within the requirements of planned space-based surveys at mild signal-to-noise ratio. We find that second-order terms can exhibit significant cancellations at low signal-to-noise ratio when Gaussian noise is assumed, which has implications for inferring the performance of shear-measurement algorithms from simplified simulations. We discuss the viability of our point estimators as tools for lensing inference, arguing that they allow for the robust measurement of ellipticity and shear.

  12. Consumer Acceptance of a Polyphenolic Coffee Beverage.

    Science.gov (United States)

    Nguyen, Thuy; Kuchera, Meredith; Smoot, Katie; Diako, Charles; Vixie, Beata; Ross, Carolyn F

    2016-10-05

    The objective of this study was to determine if Chardonnay grape seed pomace (GSP), a waste stream of wine production, could be used as a functional ingredient in brewed coffee. Two consumer panels were conducted to assess the acceptance of coffee at coffee replacement (w/w) values of 0% (control), 6.25%, 12.50%, 18.75%, or 25% GSP. The 1st consumer panel (n = 80) assessed the coffee samples served "black." The 2nd panel (n = 67) assessed the coffee samples with adjustment (that is, sweeteners, milk, and cream) options available. Consumer sensory evaluation involved evaluating the 5 treatments individually for acceptance of appearance, aroma, taste/flavor, and overall acceptance using a 9-point hedonic scale. A check-all-that-apply questionnaire surveyed the sensory attributes describing aroma, appearance, and taste/flavor of the samples. Oxygen radical absorbance capacity was used to measure the effects of antioxidant levels in GSP coffee samples. Results showed that GSP could be added at 6.25% replacement without significantly affecting the overall consumer acceptance of coffee compared to the control (0% GSP). Above 6.25% GSP supplementation, the coffee beverage was described as more tan, milky, watery/dilute, and mild, and was generally less accepted by the consumers. GSP also increased the antioxidant capacity of the coffee compared to the control (0% GSP), with no significant differences among replacement values. Therefore, 6.25% GSP replacement is recommended for creating coffee beverages acceptable to consumers. Further in vivo investigation may substantiate the free-radical scavenging capacity of GSP coffee and its potential health benefits. © 2016 Institute of Food Technologists®.

  13. Pareto versus lognormal: a maximum entropy test.

    Science.gov (United States)

    Bee, Marco; Riccaboni, Massimo; Schiavo, Stefano

    2011-08-01

    It is commonly found that distributions that seem to be lognormal over a broad range change to a power-law (Pareto) distribution for the last few percentiles. The distributions of many physical, natural, and social events (earthquake size, species abundance, income and wealth, as well as file, city, and firm sizes) display this structure. We present a test for the occurrence of power-law tails in statistical distributions based on maximum entropy. This methodology allows one to identify the true data-generating processes even in the case when it is neither lognormal nor Pareto. The maximum entropy approach is then compared with other widely used methods and applied to different levels of aggregation of complex systems. Our results provide support for the theory that distributions with lognormal body and Pareto tail can be generated as mixtures of lognormally distributed units.

  14. Novel methods for estimating lithium-ion battery state of energy and maximum available energy

    International Nuclear Information System (INIS)

    Zheng, Linfeng; Zhu, Jianguo; Wang, Guoxiu; He, Tingting; Wei, Yiying

    2016-01-01

    Highlights: • Study on temperature, current, aging dependencies of maximum available energy. • Study on the various factors dependencies of relationships between SOE and SOC. • A quantitative relationship between SOE and SOC is proposed for SOE estimation. • Estimate maximum available energy by means of moving-window energy-integral. • The robustness and feasibility of the proposed approaches are systematic evaluated. - Abstract: The battery state of energy (SOE) allows a direct determination of the ratio between the remaining and maximum available energy of a battery, which is critical for energy optimization and management in energy storage systems. In this paper, the ambient temperature, battery discharge/charge current rate and cell aging level dependencies of battery maximum available energy and SOE are comprehensively analyzed. An explicit quantitative relationship between SOE and state of charge (SOC) for LiMn_2O_4 battery cells is proposed for SOE estimation, and a moving-window energy-integral technique is incorporated to estimate battery maximum available energy. Experimental results show that the proposed approaches can estimate battery maximum available energy and SOE with high precision. The robustness of the proposed approaches against various operation conditions and cell aging levels is systematically evaluated.

  15. Accurate Maximum Power Tracking in Photovoltaic Systems Affected by Partial Shading

    Directory of Open Access Journals (Sweden)

    Pierluigi Guerriero

    2015-01-01

    Full Text Available A maximum power tracking algorithm exploiting operating point information gained on individual solar panels is presented. The proposed algorithm recognizes the presence of multiple local maxima in the power voltage curve of a shaded solar field and evaluates the coordinated of the absolute maximum. The effectiveness of the proposed approach is evidenced by means of circuit level simulation and experimental results. Experiments evidenced that, in comparison with a standard perturb and observe algorithm, we achieve faster convergence in normal operating conditions (when the solar field is uniformly illuminated and we accurately locate the absolute maximum power point in partial shading conditions, thus avoiding the convergence on local maxima.

  16. Acceptable risk in reactor safety studies

    International Nuclear Information System (INIS)

    Benjamin, J.R.; Shinozuka, M.; Shah, H.C.

    1975-01-01

    Acceptable risk is defined in terms of its five basic parameters: the hazard or problem; the probability of occurrence; the consequence; the possible alternative actions; and the value system of the community or the society. The problem of consistency in design at a site and between differing sites is discussed and solutions are suggested. Techniques for consistent deterministic and probabilistic setting limits and design standards are illustrated using data from AEC Reactor Safety Study, WASH-1400. The influence of level of consequence is discussed and a general methodology for decision analysis in resource allocation problem is briefly introduced and illustrated. The concept of acceptable risk is put in a quantitative format that can be used by engineers and planners. Bayesian statistical methods are introduced to develop the methodologies

  17. The DWPF strategy for producing an acceptable product

    International Nuclear Information System (INIS)

    Goldston, W.T.; Plodinec, M.J.

    1991-01-01

    The Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS) will convert the 130 million liters of high-level nuclear waste at SRS into stable borosilicate glass. Production of canistered waste forms by the DWPF is scheduled to begin well before submission of the license application for the first repository. The Department of Energy has defined waste acceptance specifications to ensure that DWPF canistered waste forms will be acceptable for eventual disposal. To ensure that canistered waste forms meet those specifications, a program is being carried out to qualify the waste form and those aspects of the production process which affect product quality. This program includes: Pre-production qualification testing of simulated and actual waste forms; Disciplined demonstrations of the ability to produce an acceptable product during startup testing; and Application of a rigorous product control program during production

  18. The impact of trial runs on the acceptability of pigouvian taxes: experimental evidence

    Energy Technology Data Exchange (ETDEWEB)

    Cherry, Todd L.; Kallbekken, Steffen; Kroll, Stephen

    2011-07-01

    This paper examines the political difficulty of enacting welfare-enhancing Pigouvian taxes. Using referenda in a market experiment with externalities, we investigate the effect of trial periods on the acceptability of two theoretically equivalent variants of Pigouvian taxes. While implementing either tax is in subjects material self-interest, we find significant levels of opposition to both tax schemes, though the level differs considerably. Results show that trial runs can overcome initial tax aversion, significantly increasing acceptability. The effect is robust across tax schemes, but a trial with one scheme does not affect the acceptability of the other. Trial periods also mitigate initial biases in preferences of alternative tax schemes. (auth)

  19. User acceptance of a picture archiving and communication system (PACS in a Saudi Arabian hospital radiology department

    Directory of Open Access Journals (Sweden)

    Aldosari Bakheet

    2012-05-01

    Full Text Available Abstract Background Compared with the increasingly widespread use of picture archiving and communication systems (PACSs, knowledge concerning users’ acceptance of such systems is limited. Knowledge of acceptance is needed given the large (and growing financial investment associated with the implementation of PACSs, and because the level of user acceptance influences the degree to which the benefits of the systems for healthcare can be realized. Methods A Technology Acceptance Model (TAM was used to assess the level of acceptance of the host PACS by staff in the radiology department at King Abdulaziz Medical City (KAMC, Riyadh, Saudi Arabia. A questionnaire survey of 89 PACS users was employed to obtain data regarding user characteristics, perceived usefulness (PU (6 items, perceived ease of use (PEU (4 items, a change construct (4 items, and a behavior (acceptance construct (9 items. Respondents graded each item in each construct using five-point likert scales. Results Surveyed users reported high levels of PU (4.33/5, PEU (4.15/5, change (4.26/5, and acceptance (3.86/5. The three constructs of PU, PEU, and change explained 41 % of the variation in PACS user acceptance. PU was the most important predictor, explaining 38 % of the variation on its own. The most important single item in the explanatory constructs was that users found PACS to have improved the quality of their work in providing better patient care. Technologists had lower acceptance ratings than did clinicians/radiologists, but no influence on acceptance level was found due to gender, age, or length of experience using the PACS. Although not directly measured, there appeared to be no cultural influence on either the level of acceptance or its determinants. Conclusions User acceptance must be considered when an organization implements a PACS, in order to enhance its successful adoption. Health organizations should adopt a PACS that offers all required functions and which is

  20. Estimating safe maximum levels of vitamins and minerals in fortified foods and food supplements.

    Science.gov (United States)

    Flynn, Albert; Kehoe, Laura; Hennessy, Áine; Walton, Janette

    2017-12-01

    To show how safe maximum levels (SML) of vitamins and minerals in fortified foods and supplements may be estimated in population subgroups. SML were estimated for adults and 7- to 10-year-old children for six nutrients (retinol, vitamins B6, D and E, folic acid, iron and calcium) using data on usual daily nutrient intakes from Irish national nutrition surveys. SML of nutrients in supplements were lower for children than for adults, except for calcium and iron. Daily energy intake from fortified foods in high consumers (95th percentile) varied by nutrient from 138 to 342 kcal in adults and 40-309 kcal in children. SML (/100 kcal) of nutrients in fortified food were lower for children than adults for vitamins B6 and D, higher for vitamin E, with little difference for other nutrients. Including 25 % 'overage' for nutrients in fortified foods and supplements had little effect on SML. Nutritionally significant amounts of these nutrients can be added safely to supplements and fortified foods for these population subgroups. The estimated SML of nutrients in fortified foods and supplements may be considered safe for these population subgroups over the long term given the food composition and dietary patterns prevailing in the respective dietary surveys. This risk assessment approach shows how nutrient intake data may be used to estimate, for population subgroups, the SML for vitamins and minerals in both fortified foods and supplements, separately, each taking into account the intake from other dietary sources.

  1. Standardization of waste acceptance test methods by the Materials Characterization Center

    International Nuclear Information System (INIS)

    Slate, S.C.

    1985-01-01

    This paper describes the role of standardized test methods in demonstrating the acceptability of high-level waste (HLW) forms for disposal. Key waste acceptance tests are standardized by the Materials Characterization Center (MCC), which the US Department of Energy (DOE) has established as the central agency in the United States for the standardization of test methods for nuclear waste materials. This paper describes the basic three-step process that is used to show that waste is acceptable for disposal and discusses how standardized tests are used in this process. Several of the key test methods and their areas of application are described. Finally, future plans are discussed for using standardized tests to show waste acceptance. 9 refs., 1 tab

  2. A conceptual model to explain, predict, and improve user acceptance of driverless 4P vehicles

    NARCIS (Netherlands)

    Nordhoff, S.; van Arem, B.; Happee, R.

    2016-01-01

    This paper represents a synthesis of existing empirical acceptance studies on automated driving and scientific literature on technology acceptance. The objective of this paper is to study user acceptance of driverless vehicles that fall into SAE level 4, as they operate within the constraints of

  3. Institutional innovation to generate the public acceptance of radioactive waste disposal

    International Nuclear Information System (INIS)

    Kemp, R.

    1991-01-01

    Contrasting experiences of public acceptance of radioactive waste disposal are compared for the United Kingdom, France, Sweden and Canada. The disparity between scientifically assessed and publicly perceived levels of risk is noted. The author argues that the form of decision-making process is more important to public acceptance of radioactive waste disposal than the technology of disposal. Public risk perception can be altered by procedures employed in planning, negotiation and consultation. Precisely what constitutes acceptable risk does vary from country to country, and differences in institutional responses and innovation are particularly highlighted. (UK)

  4. Waste transmutation and public acceptance

    International Nuclear Information System (INIS)

    Pigford, T.H.

    1991-01-01

    The concept of transmuting radioactive wastes with reactors or accelerators is appealing. It has the potential of simplifying or eliminating problems of disposing of nuclear waste. The transmutation concept has been renewed vigorously at a time when national projects to dispose of high-level and transuranic waste are seriously delayed. In this period of tightening federal funds and program curtailments, skilled technical staffs are available at US Department of Energy (DOE) national laboratories and contractors to work on waste transmutation. If the claims of transmutation can be shown to be realistic, economically feasible, and capable of being implemented within the US institutional infrastructure, public acceptance of nuclear waste disposal may be enhanced. If the claims for transmutation are not substantiated, however, there will result a serious loss of credibility and an unjust exacerbation of public concerns about nuclear waste. The paper discusses the following topics: how public acceptance is achieved; the technical community and waste disposal; transmutation and technical communication; transmutation issues; technical fixes and public perception

  5. Baby-Crying Acceptance

    Science.gov (United States)

    Martins, Tiago; de Magalhães, Sérgio Tenreiro

    The baby's crying is his most important mean of communication. The crying monitoring performed by devices that have been developed doesn't ensure the complete safety of the child. It is necessary to join, to these technological resources, means of communicating the results to the responsible, which would involve the digital processing of information available from crying. The survey carried out, enabled to understand the level of adoption, in the continental territory of Portugal, of a technology that will be able to do such a digital processing. It was used the TAM as the theoretical referential. The statistical analysis showed that there is a good probability of acceptance of such a system.

  6. MEASUREMENT FOR ACCEPTANCE OF SUPPLY CHAIN SIMULATOR APPLICATION USING TECHNOLOGY ACCEPTANCE MODEL

    Directory of Open Access Journals (Sweden)

    Mulyati E.

    2018-03-01

    Full Text Available The aim of this research for was to measure the user acceptance of simulator application which was built as a tool for student in learning of supply chain, particularly in bullwhip effect problem. The measurements used for the acceptance of supply chain simulator application in this research was the Technology Acceptance Model from 162 samples which were analyzed with Confirmatory Factor Analysis and Structural Equation Modelling. The result of this research indicated that the user acceptance (shown by customer participation of supply chain simulator was directly influence by perceived usefulness of supply chain simulator application used (positive and significant; the user acceptance of supply chain simulator was indirectly influenced by perceived ease of use in using supply chain simulator application (positive but not significant; the user acceptance of supply chain simulator was indirectly influenced by perceived enjoyment when the supply chain simulator application was used. The research would give a better understanding about a bullwhip effect and better experience for students, which would not be obtained through conventional learning, when the tools were not used.

  7. Should legislation regarding maximum Pb and Cd levels in human food also cover large game meat?

    Science.gov (United States)

    Taggart, Mark A; Reglero, Manuel M; Camarero, Pablo R; Mateo, Rafael

    2011-01-01

    Game meat may be contaminated with metals and metalloids if animals reside in anthropogenically polluted areas, or if ammunition used to kill the game contaminates the meat. Muscle tissue from red deer and wild boar shot in Ciudad Real province (Spain) in 2005-06 was analysed for As, Pb, Cu, Zn, Se and Cd. Samples were collected from hunting estates within and outside an area that has been historically used for mining, smelting and refining various metals and metalloids. Meat destined for human consumption, contained more Pb, As and Se (red deer) and Pb (boar) when harvested from animals that had resided in mined areas. Age related accumulation of Cd, Zn and As (in deer) and Cd, Cu and Se (in boar) was also observed. Two boar meat samples contained high Pb, at 352 and 2408 μg/g d.w., and these were likely to have been contaminated by Pb ammunition. Likewise, 19-84% of all samples (depending on species and sampling area) had Pb levels > 0.1 μg/g w.w., the EU maximum residue level (MRL) for farm reared meat. Between 9 and 43% of samples exceeded comparable Cd limits. Such data highlight a discrepancy between what is considered safe for human consumption in popular farmed meat (chicken, beef, lamb), and what in game may often exist. A risk assessment is presented which describes the number of meals required to exceed current tolerable weekly intakes (PTWIs) for Pb and Cd, and the potential contribution of large game consumption to such intake limit criteria. Copyright © 2010 Elsevier Ltd. All rights reserved.

  8. A conductance maximum observed in an inward-rectifier potassium channel

    OpenAIRE

    1994-01-01

    One prediction of a multi-ion pore is that its conductance should reach a maximum and then begin to decrease as the concentration of permeant ion is raised equally on both sides of the membrane. A conductance maximum has been observed at the single-channel level in gramicidin and in a Ca(2+)-activated K+ channel at extremely high ion concentration (> 1,000 mM) (Hladky, S. B., and D. A. Haydon. 1972. Biochimica et Biophysica Acta. 274:294-312; Eisenmam, G., J. Sandblom, and E. Neher. 1977. In ...

  9. Public acceptance and preferences related to renewable energy and grid expansion policy: Empirical insights for Germany

    International Nuclear Information System (INIS)

    Bertsch, Valentin; Hall, Margeret; Weinhardt, Christof; Fichtner, Wolf

    2016-01-01

    The rapid expansion of renewable energy sources (RES) in many European countries brings about transmission grid expansion requirements. While the transition towards RES-based energy systems is largely perceived positively in general, locally both RES and grid expansion are often confronted with a lack of public acceptance. Using Germany as a case study, we analyse public acceptance of energy infrastructure and its main drivers on local vs. national levels. For this purpose, we conducted a nationally representative survey. Our results show that, on a national level, the acceptance of RES is very high and there is also a high acceptance of grid expansion if it helps to increase the share of RES in the system. In terms of local acceptance problems that may arise for most considered technologies, concerns about landscape modification turn out to be the main driving factor. Moreover, the distance between places of residence and places of energy infrastructure construction is crucial. While acceptance or rejection of technologies will never be entirely tangible or explicable, we find the explicability of rejections to be lowest for new technologies. Finally, age and education turn out to be the most relevant socio-demographic variables determining the participants' acceptance. - Highlights: • A survey to understand drivers of energy technology acceptance was conducted. • Participants were asked to rank energy policy objectives. • Strong differences between acceptance on a national vs. a local level were found. • Landscape modification is the most important factor driving the local acceptance. • Age and education turned out to be the most relevant socio-demographic factors.

  10. Longitudinal links between childhood peer acceptance and the neural correlates of sharing.

    Science.gov (United States)

    Will, Geert-Jan; Crone, Eveline A; van Lier, Pol A C; Güroğlu, Berna

    2018-01-01

    Childhood peer acceptance is associated with high levels of prosocial behavior and advanced perspective taking skills. Yet, the neurobiological mechanisms underlying these associations have not been studied. This functional magnetic resonance imaging study examined the neural correlates of sharing decisions in a group of adolescents who had a stable accepted status (n = 27) and a group who had a chronic rejected status (n = 19) across six elementary school grades. Both groups of adolescents played three allocation games in which they could share money with strangers with varying costs and profits to them and the other person. Stably accepted adolescents were more likely to share their money with unknown others than chronically rejected adolescents when sharing was not costly. Neuroimaging analyses showed that stably accepted adolescents, compared to chronically rejected adolescents, exhibited higher levels of activation in the temporo-parietal junction, posterior superior temporal sulcus, temporal pole, pre-supplementary motor area, and anterior insula during costly sharing decisions. These findings demonstrate that stable peer acceptance across childhood is associated with heightened activity in brain regions previously linked to perspective taking and the detection of social norm violations during adolescence, and thereby provide insight into processes underlying the widely established links between peer acceptance and prosocial behavior. © 2016 The Authors. Developmental Science Published by John Wiley & Sons Ltd.

  11. The Relationship Between Maximum Isometric Strength and Ball Velocity in the Tennis Serve

    Directory of Open Access Journals (Sweden)

    Baiget Ernest

    2016-12-01

    Full Text Available The aims of this study were to analyze the relationship between maximum isometric strength levels in different upper and lower limb joints and serve velocity in competitive tennis players as well as to develop a prediction model based on this information. Twelve male competitive tennis players (mean ± SD; age: 17.2 ± 1.0 years; body height: 180.1 ± 6.2 cm; body mass: 71.9 ± 5.6 kg were tested using maximum isometric strength levels (i.e., wrist, elbow and shoulder flexion and extension; leg and back extension; shoulder external and internal rotation. Serve velocity was measured using a radar gun. Results showed a strong positive relationship between serve velocity and shoulder internal rotation (r = 0.67; p < 0.05. Low to moderate correlations were also found between serve velocity and wrist, elbow and shoulder flexion – extension, leg and back extension and shoulder external rotation (r = 0.36 – 0.53; p = 0.377 – 0.054. Bivariate and multivariate models for predicting serve velocity were developed, with shoulder flexion and internal rotation explaining 55% of the variance in serve velocity (r = 0.74; p < 0.001. The maximum isometric strength level in shoulder internal rotation was strongly related to serve velocity, and a large part of the variability in serve velocity was explained by the maximum isometric strength levels in shoulder internal rotation and shoulder flexion.

  12. Maximum Lateness Scheduling on Two-Person Cooperative Games with Variable Processing Times and Common Due Date

    Directory of Open Access Journals (Sweden)

    Peng Liu

    2017-01-01

    Full Text Available A new maximum lateness scheduling model in which both cooperative games and variable processing times exist simultaneously is considered in this paper. The job variable processing time is described by an increasing or a decreasing function dependent on the position of a job in the sequence. Two persons have to cooperate in order to process a set of jobs. Each of them has a single machine and their processing cost is defined as the minimum value of maximum lateness. All jobs have a common due date. The objective is to maximize the multiplication of their rational positive cooperative profits. A division of those jobs should be negotiated to yield a reasonable cooperative profit allocation scheme acceptable to them. We propose the sufficient and necessary conditions for the problems to have positive integer solution.

  13. Acceptance and expressed emotion in Mexican American caregivers of relatives with schizophrenia.

    Science.gov (United States)

    Dorian, Marina; Ramírez García, Jorge I; López, Steven R; Hernández, Brenda

    2008-06-01

    The relation between Expressed Emotion (EE) and caregiver acceptance was tested with the use of video-recorded interactions between 31 Mexican American family caregivers and their relatives with schizophrenia. Borrowing the concept from Integrative Behavioral Couple Therapy, acceptance was defined as caregiver's engagement with the ill relative along with low levels of expectations for behavioral change. Three aspects of caregiver acceptance were measured: global acceptance of the patient, unified detachment (i.e., nonblaming but engaged problem discussion), and low aversive responses to patient behavior (e.g., criticisms and demanding change). Relative to high EE caregivers, low EE caregivers were consistently more accepting of their ill relatives across the three measures of acceptance. Unified detachment was negatively associated with emotional overinvolvement and aversive responses were positively related to criticism. Warmth was not related to acceptance. The findings suggest that the study of acceptance in family caregivers is a heuristic avenue for future research due to its potential to shed light on specifically what family members do in caring for their ill relatives with schizophrenia.

  14. Neutron spectra unfolding with maximum entropy and maximum likelihood

    International Nuclear Information System (INIS)

    Itoh, Shikoh; Tsunoda, Toshiharu

    1989-01-01

    A new unfolding theory has been established on the basis of the maximum entropy principle and the maximum likelihood method. This theory correctly embodies the Poisson statistics of neutron detection, and always brings a positive solution over the whole energy range. Moreover, the theory unifies both problems of overdetermined and of underdetermined. For the latter, the ambiguity in assigning a prior probability, i.e. the initial guess in the Bayesian sense, has become extinct by virtue of the principle. An approximate expression of the covariance matrix for the resultant spectra is also presented. An efficient algorithm to solve the nonlinear system, which appears in the present study, has been established. Results of computer simulation showed the effectiveness of the present theory. (author)

  15. Maximum Power from a Solar Panel

    Directory of Open Access Journals (Sweden)

    Michael Miller

    2010-01-01

    Full Text Available Solar energy has become a promising alternative to conventional fossil fuel sources. Solar panels are used to collect solar radiation and convert it into electricity. One of the techniques used to maximize the effectiveness of this energy alternative is to maximize the power output of the solar collector. In this project the maximum power is calculated by determining the voltage and the current of maximum power. These quantities are determined by finding the maximum value for the equation for power using differentiation. After the maximum values are found for each time of day, each individual quantity, voltage of maximum power, current of maximum power, and maximum power is plotted as a function of the time of day.

  16. Assessment of Public Acceptability in LILW Repository Site Selection Process in Slovenia

    International Nuclear Information System (INIS)

    Zeleznik, N.; Kralj, M.; Polic, M.; Kos, D.

    2006-01-01

    Slovenian national agency for radioactive waste management ARAO has after longer period of preparation activities started with the more direct work on the site selection process for low and intermediate level waste (LILW) repository. In November 2004, the official administrative procedure for the siting of the repository started with the First public conference on spatial planning issues carried out by the Ministry of Environment and Spatial Planning together with ARAO. Just after the conference the Program for the preparation of the Detailed plan of national importance for the LILW repository was accepted by the Ministry. ARAO invited in the beginning of December 2004 all local communities in Slovenia (except 3 of them which have already refused to cooperate) to participate and volunteer a site or area in their local community for further investigation. The invitation for the application of local communities provided clear instructions on how to participate in further determination of potentially suitable sites and under what conditions. By the beginning of April 2005 ARAO finished the bidding process with 8 applications of local communities which decided to participate in the further site selection for LILW repository. Due to the financial and other limitations (human resources, spatial planning procedure, etc.) only in maximum three local communities further characterization could be performed. Therefore prefeasibility study of all volunteer local communities was conducted in which besides technical, environmental and spatial availability also public acceptability should be assessed. For assessment of public acceptability the methodology has been prepared which includes objective parameters of local environment (such as demographic data, economy, infrastructure and social issues in relation to the repository) as well as subjective values (attitudes of individual groups - opinion makers, politicians and all residents - to the sitting and construction of LILW

  17. Willingness-to-accept reductions in HIV risks: conditional economic incentives in Mexico

    Science.gov (United States)

    Galárraga, Omar; Sosa-Rubí, Sandra G.; Infante, César; Gertler, Paul J.; Bertozzi, Stefano M.

    2014-01-01

    The objective of this study was to measure willingness-to-accept (WTA) reductions in risks for HIV and other sexually transmitted infections (STI) using conditional economic incentives (CEI) among men who have sex with men (MSM), including male sex workers (MSW) in Mexico City. A survey experiment was conducted with 1,745 MSM and MSW (18-25 years of age) who received incentive offers to decide first whether to accept monthly prevention talks and STI testing; and then a second set of offers to accept to stay free of STIs (verified by quarterly biological testing). The survey used random-starting-point and iterative offers. WTA was estimated with a maximum likelihood double-bounded dichotomous choice model. The average acceptance probabilities were: 73.9% for the monthly model, and 80.4% for the quarterly model. The incentive-elasticity of participation in the monthly model was 0.222, and it was 0.515 in the quarterly model. For a combination program with monthly prevention talks, and staying free of curable STI, the implied WTA was USD$288 per person per year, but it was lower for MSW: USD$156 per person per year. Thus, some of the populations at highest risk of HIV infection (MSM & MSW) seem well disposed to participate in a CEI program for HIV and STI prevention in Mexico. The average willingness-to-accept estimate is within the range of feasible allocations for prevention in the local context. Given the potential impact, Mexico, a leader in conditional cash transfers for human development and poverty reduction, could extend that successful model for targeted HIV/STI prevention. PMID:23377757

  18. Acceptance model of a Hospital Information System.

    Science.gov (United States)

    Handayani, P W; Hidayanto, A N; Pinem, A A; Hapsari, I C; Sandhyaduhita, P I; Budi, I

    2017-03-01

    The purpose of this study is to develop a model of Hospital Information System (HIS) user acceptance focusing on human, technological, and organizational characteristics for supporting government eHealth programs. This model was then tested to see which hospital type in Indonesia would benefit from the model to resolve problems related to HIS user acceptance. This study used qualitative and quantitative approaches with case studies at four privately owned hospitals and three government-owned hospitals, which are general hospitals in Indonesia. The respondents involved in this study are low-level and mid-level hospital management officers, doctors, nurses, and administrative staff who work at medical record, inpatient, outpatient, emergency, pharmacy, and information technology units. Data was processed using Structural Equation Modeling (SEM) and AMOS 21.0. The study concludes that non-technological factors, such as human characteristics (i.e. compatibility, information security expectancy, and self-efficacy), and organizational characteristics (i.e. management support, facilitating conditions, and user involvement) which have level of significance of p<0.05, significantly influenced users' opinions of both the ease of use and the benefits of the HIS. This study found that different factors may affect the acceptance of each user in each type of hospital regarding the use of HIS. Finally, this model is best suited for government-owned hospitals. Based on the results of this study, hospital management and IT developers should have more understanding on the non-technological factors to better plan for HIS implementation. Support from management is critical to the sustainability of HIS implementation to ensure HIS is easy to use and provides benefits to the users as well as hospitals. Finally, this study could assist hospital management and IT developers, as well as researchers, to understand the obstacles faced by hospitals in implementing HIS. Copyright © 2016

  19. Resource quality or competition: why increase resource acceptance in the presence of conspecifics?

    Science.gov (United States)

    Davis, Jeremy M; Nufio, César R; Papaj, Daniel R

    2011-07-01

    Some animal species increase resource acceptance rates in the presence of conspecifics. Such responses may be adaptive if the presence of conspecifics is a reliable indicator of resource quality. Similarly, these responses could represent an adaptive reduction in choosiness under high levels of scramble competition. Although high resource quality and high levels of scramble competition should both favor increased resource acceptance, the contexts in which the increase occurs should differ. In this paper, we tested the effect of social environment on egg-laying and aggressive behavior in the walnut fly, Rhagoletis juglandis, in multiple contexts to determine whether increased resource acceptance in the presence of conspecifics was better viewed as a response to increased host quality or increased competition. We found that grouped females oviposit more readily than isolated females when provided small (low-quality) artificial hosts but not when provided large (high-quality) artificial hosts, indicating that conspecific presence reduces choosiness. Increased resource acceptance was observed even when exposure to conspecifics was temporally or spatially separate from exposure to the resource. Finally, we found that individuals showed reduced aggression after being housed in groups, as expected under high levels of scramble competition. These results indicate that the pattern of resource acceptance in the presence of conspecifics may be better viewed as a response to increased scramble competition rather than as a response to public information about resource quality.

  20. Logotherapy Counseling to Improve Acceptance of Broken Home Child

    Directory of Open Access Journals (Sweden)

    Erwin Erlangga

    2017-08-01

    Full Text Available This study aims to increase the enrollment of children of a broken home that life has meaning. Subjects are 100 children in Demak whose families experiencing divorce. Research themes include three things: individual counseling, engineering logotherapy, reception, and a child of a broken home. Data obtained based on interviews, observation, and psychological scale showed that of the 100 children of a broken home has a low acceptance that individual counseling with logotherapy techniques were considered appropriate to increase the enrollment of children of a broken home. Factors - factors that affect the acceptance of a child of a broken home is self-blame, anger and did not have a purpose in life again. In addition the environment is also a significant effect on the enrollment of children of a broken home. Environmental labeling of families experiencing divorce as a family that failed so that children are increasingly stressed with the stamp of the community. Based on the field test results, the level of acceptance of the child of a broken home increases after the individual is given counseling services with logotherapy techniques. Indicated by changes in the level of acceptance of children of a broken home before being given treatment (initial evaluation and after (final evaluation of 130 points. The results of effectiveness test statistic t test calculations also showed 0,010 <0.05.It was concluded that counseling individuals with logotherapy effective technique to increase the enrollment of children of a broken home

  1. A local maximum in gibberellin levels regulates maize leaf growth by spatial control of cell division.

    Science.gov (United States)

    Nelissen, Hilde; Rymen, Bart; Jikumaru, Yusuke; Demuynck, Kirin; Van Lijsebettens, Mieke; Kamiya, Yuji; Inzé, Dirk; Beemster, Gerrit T S

    2012-07-10

    Plant growth rate is largely determined by the transition between the successive phases of cell division and expansion. A key role for hormone signaling in determining this transition was inferred from genetic approaches and transcriptome analysis in the Arabidopsis root tip. We used the developmental gradient at the maize leaf base as a model to study this transition, because it allows a direct comparison between endogenous hormone concentrations and the transitions between dividing, expanding, and mature tissue. Concentrations of auxin and cytokinins are highest in dividing tissues, whereas bioactive gibberellins (GAs) show a peak at the transition zone between the division and expansion zone. Combined metabolic and transcriptomic profiling revealed that this GA maximum is established by GA biosynthesis in the division zone (DZ) and active GA catabolism at the onset of the expansion zone. Mutants defective in GA synthesis and signaling, and transgenic plants overproducing GAs, demonstrate that altering GA levels specifically affects the size of the DZ, resulting in proportional changes in organ growth rates. This work thereby provides a novel molecular mechanism for the regulation of the transition from cell division to expansion that controls organ growth and size. Copyright © 2012 Elsevier Ltd. All rights reserved.

  2. Grammaticality, Acceptability, and Probability: A Probabilistic View of Linguistic Knowledge.

    Science.gov (United States)

    Lau, Jey Han; Clark, Alexander; Lappin, Shalom

    2017-07-01

    The question of whether humans represent grammatical knowledge as a binary condition on membership in a set of well-formed sentences, or as a probabilistic property has been the subject of debate among linguists, psychologists, and cognitive scientists for many decades. Acceptability judgments present a serious problem for both classical binary and probabilistic theories of grammaticality. These judgements are gradient in nature, and so cannot be directly accommodated in a binary formal grammar. However, it is also not possible to simply reduce acceptability to probability. The acceptability of a sentence is not the same as the likelihood of its occurrence, which is, in part, determined by factors like sentence length and lexical frequency. In this paper, we present the results of a set of large-scale experiments using crowd-sourced acceptability judgments that demonstrate gradience to be a pervasive feature in acceptability judgments. We then show how one can predict acceptability judgments on the basis of probability by augmenting probabilistic language models with an acceptability measure. This is a function that normalizes probability values to eliminate the confounding factors of length and lexical frequency. We describe a sequence of modeling experiments with unsupervised language models drawn from state-of-the-art machine learning methods in natural language processing. Several of these models achieve very encouraging levels of accuracy in the acceptability prediction task, as measured by the correlation between the acceptability measure scores and mean human acceptability values. We consider the relevance of these results to the debate on the nature of grammatical competence, and we argue that they support the view that linguistic knowledge can be intrinsically probabilistic. Copyright © 2016 Cognitive Science Society, Inc.

  3. Chinese Nurses' Acceptance of PDA: A Cross-Sectional Survey Using a Technology Acceptance Model.

    Science.gov (United States)

    Wang, Yanling; Xiao, Qian; Sun, Liu; Wu, Ying

    2016-01-01

    This study explores Chinese nurses' acceptance of PDA, using a questionnaire based on the framework of Technology Acceptance Model (TAM). 357 nurses were involved in the study. The results reveal the scores of the nurses' acceptance of PDA were means 3.18~3.36 in four dimensions. The younger of nurses, the higher nurses' title, the longer previous usage time, the more experienced using PDA, and the more acceptance of PDA. Therefore, the hospital administrators may change strategies to enhance nurses' acceptance of PDA, and promote the wide application of PDA.

  4. Perceived naturalness and evoked disgust influence acceptance of cultured meat.

    Science.gov (United States)

    Siegrist, Michael; Sütterlin, Bernadette; Hartmann, Christina

    2018-05-01

    Cultured meat could be a more environment- and animal-friendly alternative to conventional meat. However, in addition to the technological challenges, the lack of consumer acceptance could be a major barrier to the introduction of cultured meat. Therefore, it seems wise to take into account consumer concerns at an early stage of product development. In this regard, we conducted two experiments that examined the impact of perceived naturalness and disgust on consumer acceptance of cultured meat. The results of Experiment 1 suggest the participants' low level of acceptance of cultured meat because it is perceived as unnatural. Moreover, informing participants about the production of cultured meat and its benefits has the paradoxical effect of increasing the acceptance of traditional meat. Experiment 2 shows that how cultured meat is described influences the participants' perception. Thus, it is important to explain cultured meat in a nontechnical way that emphasizes the final product, not the production method, to increase acceptance of this novel food. Copyright © 2018 Elsevier Ltd. All rights reserved.

  5. Teaching via Mobile Phone: a Case Study on Malaysian Teachers’ Technology Acceptance and Readiness

    Directory of Open Access Journals (Sweden)

    Issham Ismail

    2013-01-01

    Full Text Available The purpose of this study is to identify the level of technology acceptance among school teachers from the components of awareness and motivation, training and courses, training design, and supports and facilities. This study also aims to investigate whether teachers’ acceptance of technology could influence their readiness for the pedagogical use of mobile phone technology if it is to be implemented in school. A quantitative questionnaire was administered to thirty eight teachers who teach Information and Technology (IT subject from different primary schools in Penang, Malaysia during a program on Teachers’ Development. Data revealed that the level of technology acceptance among respondents in terms of awareness and motivation, training and courses, training design and supports and facilities was generally high. Despite this positive acceptance of technology, teachers’ readiness for the use of mobile phone in teaching and learning was found to be at a considerably low level. However, the study identified a significant correlation between respondents’ awareness and motivation towards technology with their readiness for the pedagogical usage of mobile phone. It was also found that gender is a possible factor influencing the respondents’ readiness. As implication, this paper probes the influence of technology acceptance on teachers’ readiness for the pedagogical usage of mobile phone and the possible implications this influence affords.

  6. Nevada Test Site waste acceptance criteria [Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    None

    1997-08-01

    Revision one updates the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive and mixed waste for disposal; and transuranic and transuranic mixed waste for interim storage at the NTS. Review each section of this document. This document is not intended to include all of the requirements; rather, it is meant as a guide toward meeting the regulations. All references in this document should be observed to avoid omission of requirements on which acceptance or rejection of waste will be based. The Department of Energy/Nevada Operations Office (DOE/NV) and support contractors are available to assist you in understanding or interpreting this document.

  7. Nevada Test Site waste acceptance criteria [Revision 1

    International Nuclear Information System (INIS)

    None

    1997-01-01

    Revision one updates the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive and mixed waste for disposal; and transuranic and transuranic mixed waste for interim storage at the NTS. Review each section of this document. This document is not intended to include all of the requirements; rather, it is meant as a guide toward meeting the regulations. All references in this document should be observed to avoid omission of requirements on which acceptance or rejection of waste will be based. The Department of Energy/Nevada Operations Office (DOE/NV) and support contractors are available to assist you in understanding or interpreting this document

  8. Dependency of maximum goitrogenic response on some minimal level of thyroid hormone production

    International Nuclear Information System (INIS)

    March, B.E.; Poon, R.

    1981-01-01

    Thyroidal activity was studied in chicks given dietary thiouracil in conjunction with daily doses of thyroxine and with diets adequate and deficient in iodine. DL-thyroxine administered at doses up to 1.0 microgram per day for 10 to 12 days had no effect or slightly increased thyroid weight. Both the epithelial and colloid components of the thyroid gland were increased in response to thiouracil and to thiouracil in combination with low dosages of exogenous thyroxine. Radioiodine uptake was increased above the control with thiouracil and with thiouracil in conjunction with .5 and 1.0 microgram DL-thyroxine given daily. Birds receiving thiouracil, with and without exogenous thyroxine, showed a different pattern of radioiodine uptake and release than the control birds. Thiouracil-treated birds showed a rapid uptake of iodine following its administration, which was followed by a rapid decline immediately after peak accumulation, whereas in control birds thyroidal radioiodine concentration reached a plateau at the maximum concentration attained. The goitrogenic response to thiouracil was much greater when the diet was supplemented with iodine than when the diet was iodine-deficient. Thyroids under iodine deficiency contained greater percentages of epithelial tissue than with iodine-supplemented diets. Thyroid glands of chicks given thiouracil in an iodine-supplemented diet contained much more colloid than glands from iodine-deficient chicks with or without thiouracil. DL-thyroxine at a dosage of .5 microgram per day to chicks given thiouracil in an iodine-adequate diet increased, whereas higher dosages decreased thyroidal colloid. It is concluded that some minimal concentration of thyroid hormone is required for maximum goitrogenic response. It is not clear whether the response is entirely due to an effect on thyrotropin production or whether there is an effect of thyroid hormone on the thyroid gland itself

  9. Modeling & Analysisng of Economic Behaviour of Insurance Acceptance of Wheat crop by using of Thinking System Approach

    Directory of Open Access Journals (Sweden)

    hamid balali

    2014-10-01

    Full Text Available Unsustainability and precarious conditions of agricultural production have caused this sector be associated with risk . Crops insurance is efficient tool for controlling and reducing production and market risk and stabilizing farmers' income. In this study, the thinking system approach by using of I Think software is used for analyzing and modeling of the effects of different alternatives of policies on wheat insurance acceptance. The results show that the decision making process of insurance acceptance is function of some variables including of probability of brooz khesarat, amount of brooz khesarat, share of farmer’s insurance payment, gross return of fermers and maximum tahood of bimegar payments. Also, by increasing of the probability of brooz khesarat the number of insurance acceptance will increaseal production have caused this sector be associated with risk . Crops insurance is efficient tool for controlling and reducing production and market risk and stabilizing farmers' income. In .

  10. Age and Acceptance of Euthanasia.

    Science.gov (United States)

    Ward, Russell A.

    1980-01-01

    Study explores relationship between age (and sex and race) and acceptance of euthanasia. Women and non-Whites were less accepting because of religiosity. Among older people less acceptance was attributable to their lesser education and greater religiosity. Results suggest that quality of life in old age affects acceptability of euthanasia. (Author)

  11. Technology Acceptance Model (TAM) untuk Menganalisis Penerimaan terhadap Sistem Informasi di PerpustakaanM INFORMASI PERPUSTAKAAN

    OpenAIRE

    Fatmawati, Endang

    2015-01-01

    Technology acceptance can be defined as a user's willingness to employ technology for the tasks it is designed to support. Technology Acceptance Model (TAM) introduced by Davis in 1986. TAM is considers user perceptions of ease of use and usefulness as the main factors affecting the acceptance level of any technology. TAM is model for explaining and predicting information system use in library. TAM model to determine the attitude of users towards a technology acceptance.

  12. Effect of the Fukushima nuclear disaster on global public acceptance of nuclear energy

    International Nuclear Information System (INIS)

    Kim, Younghwan; Kim, Minki; Kim, Wonjoon

    2013-01-01

    The Fukushima nuclear disaster has significantly changed public attitudes toward nuclear energy. It is important to understand how this change has occurred in different countries before the global community revises existing nuclear policies. This study examines the effect of the Fukushima disaster on public acceptance of nuclear energy in 42 countries. We find that the operational experience of nuclear power generation which has significantly affected positive public opinion about nuclear energy became considerably negative after the disaster, suggesting fundamental changes in public acceptance regardless of the level of acceptance before the disaster. In addition, contrary to our expectation, the proportion of nuclear power generation is positively and significantly related to public acceptance of nuclear energy after the Fukushima accident and government pressure on media content led to a greater decrease in the level of public acceptance after the accident. Nuclear energy policymakers should consider the varied factors affecting public acceptance of nuclear energy in each country depending on its historical, environmental, and geographical circumstances before they revise nuclear policy in response to the Fukushima accident. - Highlights: • Fukushima accident has negatively changed public attitudes toward nuclear energy. • Effect of operational experience became considerably negative after the accident. • Effect of proportion of nuclear power generation is positive after the accident. • Effect of government pressure on media content became negative after the accident. • Country specific policy responses on nuclear public acceptance are required

  13. Public Acceptance for Sustainable Power Development: Sharing Nepalese Experience

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Dilli Bahadur; Singh, Anju; Shrestha, Sugam

    2007-07-01

    Nepal with 83000 MW of hydropower potential has harnessed only 1% of it. With a target of 8% GDP growth rate needs 15000 MW of hydropower to be exported, by 2012. Which will bring the majority(32%) of its population above the poverty line. For this Nepal ought to develop its hydropower potential maintaining social equity and environmental justice leading towards the sustainable development. One of the key attributes/ingredient to this is Public Participation/Acceptance. Hence, an in depth study was conducted for examining the level of peoples' participation/acceptance. Field visit of 6 projects and questionnaire survey conducted involving 13 groups of stakeholders revealed that public participation were sufficiently done and acceptance was also sought specially after the promulgation of Environmental Legislations. Nepal has no choice other than to develop its hydropower potential for its internal demand and to supply to the neighbouring countries, in the endeavour to reduce/eliminate the poverty, prevailing as a cancer. Henceforth, all the hydropower projects to be developed in the future should be socio-culturally acceptable, economically viable and environmentally benign. For this to happen one of the key ingredients/attributes is the public participation and gaining public acceptance in an effective and efficient manner. (auth)

  14. Assessment of allowable transuranic activity levels for WIPP wastes

    International Nuclear Information System (INIS)

    1987-12-01

    This study provides a technical evaluation for the establishment of an upper limit on the transuranic content of waste packages to be received. To accomplish this, the predicted radiological performance of WIPP is compared to the radiological performance requirements applicable to WIPP. These performance requirements include radiation protection standards for both routine facility operations and credible operational accidents. These requirements are discussed in Chapter 2.0. From the margin between predicted performance and the performance requirements, the maximum allowable transuranic content of waste packages can then be inferred. Within the resulting compliance envelope, a waste acceptance criterion can be established that delineates the allowable level of transuranic radioactivity content for contact handled (CH) and remote handled (RH) waste packages. 13 refs., 8 tabs

  15. Public acceptance of nuclear energy in Mexico

    International Nuclear Information System (INIS)

    Alonso, Gustavo; Ramirez, Ramon; Palacios, Javier; Gomez, Armando

    2008-01-01

    One of the main constraints to adopt a nuclear program is the public acceptance. In Mexico, at least, it lacks of an adequate promotion of its benefits and challenges. A big stigma for nuclear electricity production is the association with nuclear weapons, along with myths and misconceptions and bad information about nuclear energy. Mexico has adopted an energy policy to diversify the electricity sources and nuclear energy is among the alternatives to achieve this goal because current studies show that is a safe and a competitive option from an economical point of view. Public opinion plays a very important role in the policy decision making to adopt the deployment of new reactor units; therefore it is necessary to define communication strategies to promote nuclear energy. The current study is an investigation to learn what is the perception and positioning about nuclear energy as a starting point to define the way to improve public acceptance. The national assessment carry on here is divided in two parts, the first one is a qualitative study to know knowledge level, associations and nuclear perception, identifying controversy items and expectations about advantages and disadvantages to define the adequate question to be used in the second part, which is a quantitative study that shows the acceptance of nuclear energy at national level and in particular in two sites that are suitable to deploy new nuclear reactors. From the results of this study some communication and persuasion strategies to improve public perception are defined and they could be used as part of a nuclear program. (author)

  16. Limits of acceptable change as tool for tourism development sustainability in Pangandaran West Java

    Science.gov (United States)

    Komsary, K. C.; Tarigan, W. P.; Wiyana, T.

    2018-03-01

    Pangandaran since 2006 has become a model of sustainable tourism development. A program aimed to empower local communities to prepare work plans and activities to enrich the various potential development of sustainable tourism. By empowering local community, business competition has led to the undesired development of the tourism sector. This becomes the concern of the negative impact of physical changes in the area. This study aims to identify and measure the acceptable changes (limits of acceptable change-LAC) of tourism development in Pangandaran to remain adaptable as a tourist attraction. This study considers how to determine acceptable levels of impact that occurs in the Pangandaran area. This method involves stakeholders in determining the values, issues, and concerns the acceptable levels of impact for this region. The result of acceptance rate then compared with the effects of the current state. Through review and analysis methods used in this study, the LAC situation in Pangandaran outlined. Results from this study are expected to identify indicators of sustainable development of tourism sector through LAC approach.

  17. FUZZY ACCEPTANCE SAMPLING AND CHARACTERISTIC CURVES

    Directory of Open Access Journals (Sweden)

    Ebru Turano?lu

    2012-02-01

    Full Text Available Acceptance sampling is primarily used for the inspection of incoming or outgoing lots. Acceptance sampling refers to the application of specific sampling plans to a designated lot or sequence of lots. The parameters of acceptance sampling plans are sample sizes and acceptance numbers. In some cases, it may not be possible to define acceptance sampling parameters as crisp values. These parameters can be expressed by linguistic variables. The fuzzy set theory can be successfully used to cope with the vagueness in these linguistic expressions for acceptance sampling. In this paper, the main distributions of acceptance sampling plans are handled with fuzzy parameters and their acceptance probability functions are derived. Then the characteristic curves of acceptance sampling are examined under fuzziness. Illustrative examples are given.

  18. Public acceptance of renewable energy technologies from an abstract versus concrete perspective and the positive imagery of solar power

    International Nuclear Information System (INIS)

    Sütterlin, Bernadette; Siegrist, Michael

    2017-01-01

    Public acceptance and perception of renewable energy sources are key factors for successfully accomplishing an energy transition. In this light, developing effective policy and communication measures necessitates understanding how people perceive energy systems. Accordingly, the present study aimed to shed light on people's imagery of solar power, one of the renewable energy sources with the highest potential. Results revealed that almost unanimously people associate solar power with highly positive imagery and that visual characteristics are especially prevalent. The successful realization of renewable energy projects requires policymakers to draw on reliable data about public acceptance of renewables. In response to this need, the present study examined whether assessing public acceptance of renewables on a more concrete level (i.e., by addressing drawbacks) can result in a different, more reliable acceptance rating than assessment on an abstract level, as done at present in opinion polls. Results showed that people do not think about drawbacks related to renewables when they consider it from a general, more abstract, perspective. However, when downsides are specifically addressed, people integrate these into their evaluation, thus diminishing acceptance. Even the highly positive imagery of solar power is relativized and acceptance decreases. These findings have several important implications for policymakers. - Highlights: • Evaluating renewables on a concrete rather than abstract level decreases acceptance. • People are less likely to consider drawbacks when assessing renewables on an abstract level. • On a concrete level, people consider drawbacks, even if not personally affected. • Public acceptance assessed on a concrete level provides a more valid base for policy decisions. • People almost unanimously hold a strongly positive imagery of solar power.

  19. Perceptions and attitude effects on nanotechnology acceptance: an exploratory framework

    International Nuclear Information System (INIS)

    Ganesh Pillai, Rajani; Bezbaruah, Achintya N.

    2017-01-01

    Existing literature in people’s attitude toward nanotechnology and acceptance of nanotechnology applications has generally investigated the impact of factors at the individual or context levels. While this vast body of research is very informative, a comprehensive understanding of how attitude toward nanotechnology are formed and factors influencing the acceptance of nanotechnology are elusive. This paper proposes an exploratory nanotechnology perception-attitude-acceptance framework (Nano-PAAF) to build a systematic understanding of the phenomenon. The framework proposes that perceptions of risks and benefits of nanotechnology are influenced by cognitive, affective, and sociocultural factors. The sociodemographic factors of consumers and contextual factors mitigate the influence of cognitive, affective, and sociocultural factors on the perception of risks and benefits. The perceived risks and benefits in turn influence people’s attitude toward nanotechnology, which then influences acceptance of nanotechnology products. This framework will need further development over time to incorporate emerging knowledge and is expected to be useful for researchers, decision and policy makers, industry, and business entities.

  20. Perceptions and attitude effects on nanotechnology acceptance: an exploratory framework

    Energy Technology Data Exchange (ETDEWEB)

    Ganesh Pillai, Rajani, E-mail: rajani.pillai@ndsu.edu [North Dakota State University, Department of Management and Marketing, College of Business (United States); Bezbaruah, Achintya N., E-mail: a.bezbaruah@ndsu.edu [North Dakota State University, Civil and Environmental Engineering (United States)

    2017-02-15

    Existing literature in people’s attitude toward nanotechnology and acceptance of nanotechnology applications has generally investigated the impact of factors at the individual or context levels. While this vast body of research is very informative, a comprehensive understanding of how attitude toward nanotechnology are formed and factors influencing the acceptance of nanotechnology are elusive. This paper proposes an exploratory nanotechnology perception-attitude-acceptance framework (Nano-PAAF) to build a systematic understanding of the phenomenon. The framework proposes that perceptions of risks and benefits of nanotechnology are influenced by cognitive, affective, and sociocultural factors. The sociodemographic factors of consumers and contextual factors mitigate the influence of cognitive, affective, and sociocultural factors on the perception of risks and benefits. The perceived risks and benefits in turn influence people’s attitude toward nanotechnology, which then influences acceptance of nanotechnology products. This framework will need further development over time to incorporate emerging knowledge and is expected to be useful for researchers, decision and policy makers, industry, and business entities.

  1. Maximum Margin Clustering of Hyperspectral Data

    Science.gov (United States)

    Niazmardi, S.; Safari, A.; Homayouni, S.

    2013-09-01

    In recent decades, large margin methods such as Support Vector Machines (SVMs) are supposed to be the state-of-the-art of supervised learning methods for classification of hyperspectral data. However, the results of these algorithms mainly depend on the quality and quantity of available training data. To tackle down the problems associated with the training data, the researcher put effort into extending the capability of large margin algorithms for unsupervised learning. One of the recent proposed algorithms is Maximum Margin Clustering (MMC). The MMC is an unsupervised SVMs algorithm that simultaneously estimates both the labels and the hyperplane parameters. Nevertheless, the optimization of the MMC algorithm is a non-convex problem. Most of the existing MMC methods rely on the reformulating and the relaxing of the non-convex optimization problem as semi-definite programs (SDP), which are computationally very expensive and only can handle small data sets. Moreover, most of these algorithms are two-class classification, which cannot be used for classification of remotely sensed data. In this paper, a new MMC algorithm is used that solve the original non-convex problem using Alternative Optimization method. This algorithm is also extended for multi-class classification and its performance is evaluated. The results of the proposed algorithm show that the algorithm has acceptable results for hyperspectral data clustering.

  2. Maximum concentrations at work and maximum biologically tolerable concentration for working materials 1991

    International Nuclear Information System (INIS)

    1991-01-01

    The meaning of the term 'maximum concentration at work' in regard of various pollutants is discussed. Specifically, a number of dusts and smokes are dealt with. The valuation criteria for maximum biologically tolerable concentrations for working materials are indicated. The working materials in question are corcinogeneous substances or substances liable to cause allergies or mutate the genome. (VT) [de

  3. 40 CFR 1042.140 - Maximum engine power, displacement, power density, and maximum in-use engine speed.

    Science.gov (United States)

    2010-07-01

    ... cylinders having an internal diameter of 13.0 cm and a 15.5 cm stroke length, the rounded displacement would... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Maximum engine power, displacement... Maximum engine power, displacement, power density, and maximum in-use engine speed. This section describes...

  4. PARTICLE SWARM OPTIMIZATION BASED OF THE MAXIMUM PHOTOVOLTAIC POWER TRACTIOQG UNDER DIFFERENT CONDITIONS

    Directory of Open Access Journals (Sweden)

    Y. Labbi

    2015-08-01

    Full Text Available Photovoltaic electricity is seen as an important source of renewable energy. The photovoltaic array is an unstable source of power since the peak power point depends on the temperature and the irradiation level. A maximum peak power point tracking is then necessary for maximum efficiency.In this work, a Particle Swarm Optimization (PSO is proposed for maximum power point tracker for photovoltaic panel, are used to generate the optimal MPP, such that solar panel maximum power is generated under different operating conditions. A photovoltaic system including a solar panel and PSO MPP tracker is modelled and simulated, it has been has been carried out which has shown the effectiveness of PSO to draw much energy and fast response against change in working conditions.

  5. Criteria for accepting piping thermal expansion movements during FFTF plant startup

    International Nuclear Information System (INIS)

    Clark, G.L.; Anderson, M.J.

    1981-03-01

    A deflection measurement program was conducted as a final step in the design qualification of the Fast Flux Test Facility liquid sodium piping. Measurements were obtained from the ambient empty position, through the 400 0 F (204 0 C) sodium fill, to an 800 0 F (427 0 C) maximum iso-thermal test condition. The program was designed to confirm that the pipe responded as predicted under both deadweight and thermal expansion loads. This paper describes the design of the test programs; the criteria used to select appropriate measurement locations from the approximately 4000 supports used on this pipe; and the criteria used to accept test results

  6. Credal Networks under Maximum Entropy

    OpenAIRE

    Lukasiewicz, Thomas

    2013-01-01

    We apply the principle of maximum entropy to select a unique joint probability distribution from the set of all joint probability distributions specified by a credal network. In detail, we start by showing that the unique joint distribution of a Bayesian tree coincides with the maximum entropy model of its conditional distributions. This result, however, does not hold anymore for general Bayesian networks. We thus present a new kind of maximum entropy models, which are computed sequentially. ...

  7. Biological bases of the maximum permissible exposure levels of the UK laser standard BS 4803: 1983

    International Nuclear Information System (INIS)

    McKinlay, A.F.; Harlen, F.

    1983-10-01

    The use of lasers has increased greatly over the past 15 years or so, to the extent that they are now used routinely in many occupational and public situations. There has been an increasing awareness of the potential hazards presented by lasers and substantial efforts have been made to formulate safety standards. In the UK the relevant Safety Standard is the British Standards Institution Standard BS 4803. This Standard was originally published in 1972 and a revision has recently been published (BS 4803: 1983). The revised standard has been developed using the American National Standards Institute Standard, ANSI Z136.1 (1973 onwards), as a model. In other countries, national standards have been similarly formulated, resulting in a large measure of international agreement through participation in the work of the International Electrotechnical Commission (IEC). The bases of laser safety standards are biophysical data on threshold injury effects, particularly on the retina, and the development of theoretical models of damage mechanisms. This report deals in some detail with the mechanisms of injury from over exposure to optical radiations, in particular with the dependency of the type and degree of damage on wavelength, image size and pulse duration. The maximum permissible exposure levels recommended in BS 4803: 1983 are compared with published data for damage thresholds and the adequacy of the standard is discussed. (author)

  8. DOE acceptance of commercial mixed waste -- Studies are under way

    Energy Technology Data Exchange (ETDEWEB)

    Plummer, T.L. [Dept. of Energy, Washington, DC (United States). Technical Support Program; Owens, C.M. [Idaho National Engineering Lab., Idaho Falls, ID (United States). National Low-Level Waste Management Program

    1993-03-01

    The topic of the Department of Energy acceptance of commercial mixed waste at DOE facilities has been proposed by host States and compact regions that are developing low-level radioactive waste disposal facilities. States support the idea of DOE accepting commercial mixed waste because (a) very little commercial mixed waste is generated compared to generation by DOE facilities (Department of Energy--26,300 cubic meters annually vs. commercial--3400 cubic meters annually); (b) estimated costs for commercial disposal are estimated to be $15,000 to $40,000 per cubic foot; (c) once treatment capability becomes available, 70% of the current levels of commercial mixed waste will be eliminated, (d) some State laws prohibit the development of mixed waste disposal facilities in their States; (e) DOE is developing a nationwide strategy that will include treatment and disposal capacity for its own mixed waste and the incremental burden on the DOE facilities would be minuscule, and (6) no States are developing mixed waste disposal facilities. DOE senior management has repeatedly expressed willingness to consider investigating the feasibility of DOE accepting commercial mixed waste. In January 1991, Leo Duffy of the Department of energy met with members of the Low-Level Radioactive Waste Forum, which led to an agreement to explore such an arrangement. He stated that this seems like a cost-effective way to solve commercial mixed waste management problems.

  9. On the consistency of risk acceptance criteria with normative theories for decision-making

    Energy Technology Data Exchange (ETDEWEB)

    Abrahamsen, E.B. [University of Stavanger, 4036 Stavanger (Norway)], E-mail: eirik.abrahamsen@uis.no; Aven, T. [University of Stavanger, 4036 Stavanger (Norway)

    2008-12-15

    In evaluation of safety in projects it is common to use risk acceptance criteria to support decision-making. In this paper, we discuss to what extent the risk acceptance criteria is in accordance with the normative theoretical framework of the expected utility theory and the rank-dependent utility theory. We show that the use of risk acceptance criteria may violate the independence axiom of the expected utility theory and the comonotonic independence axiom of the rank-dependent utility theory. Hence the use of risk acceptance criteria is not in general consistent with these theories. The level of inconsistency is highest for the expected utility theory.

  10. On the consistency of risk acceptance criteria with normative theories for decision-making

    International Nuclear Information System (INIS)

    Abrahamsen, E.B.; Aven, T.

    2008-01-01

    In evaluation of safety in projects it is common to use risk acceptance criteria to support decision-making. In this paper, we discuss to what extent the risk acceptance criteria is in accordance with the normative theoretical framework of the expected utility theory and the rank-dependent utility theory. We show that the use of risk acceptance criteria may violate the independence axiom of the expected utility theory and the comonotonic independence axiom of the rank-dependent utility theory. Hence the use of risk acceptance criteria is not in general consistent with these theories. The level of inconsistency is highest for the expected utility theory

  11. Estimation of Maximum Allowable PV Connection to LV Residential Power Networks

    DEFF Research Database (Denmark)

    Demirok, Erhan; Sera, Dezso; Teodorescu, Remus

    2011-01-01

    Maximum photovoltaic (PV) hosting capacity of low voltage (LV) power networks is mainly restricted by either thermal limits of network components or grid voltage quality resulted from high penetration of distributed PV systems. This maximum hosting capacity may be lower than the available solar...... potential of geographic area due to power network limitations even though all rooftops are fully occupied with PV modules. Therefore, it becomes more of an issue to know what exactly limits higher PV penetration level and which solutions should be engaged efficiently such as over sizing distribution...

  12. Maximum Entropy in Drug Discovery

    Directory of Open Access Journals (Sweden)

    Chih-Yuan Tseng

    2014-07-01

    Full Text Available Drug discovery applies multidisciplinary approaches either experimentally, computationally or both ways to identify lead compounds to treat various diseases. While conventional approaches have yielded many US Food and Drug Administration (FDA-approved drugs, researchers continue investigating and designing better approaches to increase the success rate in the discovery process. In this article, we provide an overview of the current strategies and point out where and how the method of maximum entropy has been introduced in this area. The maximum entropy principle has its root in thermodynamics, yet since Jaynes’ pioneering work in the 1950s, the maximum entropy principle has not only been used as a physics law, but also as a reasoning tool that allows us to process information in hand with the least bias. Its applicability in various disciplines has been abundantly demonstrated. We give several examples of applications of maximum entropy in different stages of drug discovery. Finally, we discuss a promising new direction in drug discovery that is likely to hinge on the ways of utilizing maximum entropy.

  13. Maximum Quantum Entropy Method

    OpenAIRE

    Sim, Jae-Hoon; Han, Myung Joon

    2018-01-01

    Maximum entropy method for analytic continuation is extended by introducing quantum relative entropy. This new method is formulated in terms of matrix-valued functions and therefore invariant under arbitrary unitary transformation of input matrix. As a result, the continuation of off-diagonal elements becomes straightforward. Without introducing any further ambiguity, the Bayesian probabilistic interpretation is maintained just as in the conventional maximum entropy method. The applications o...

  14. Maximum-likelihood fitting of data dominated by Poisson statistical uncertainties

    International Nuclear Information System (INIS)

    Stoneking, M.R.; Den Hartog, D.J.

    1996-06-01

    The fitting of data by χ 2 -minimization is valid only when the uncertainties in the data are normally distributed. When analyzing spectroscopic or particle counting data at very low signal level (e.g., a Thomson scattering diagnostic), the uncertainties are distributed with a Poisson distribution. The authors have developed a maximum-likelihood method for fitting data that correctly treats the Poisson statistical character of the uncertainties. This method maximizes the total probability that the observed data are drawn from the assumed fit function using the Poisson probability function to determine the probability for each data point. The algorithm also returns uncertainty estimates for the fit parameters. They compare this method with a χ 2 -minimization routine applied to both simulated and real data. Differences in the returned fits are greater at low signal level (less than ∼20 counts per measurement). the maximum-likelihood method is found to be more accurate and robust, returning a narrower distribution of values for the fit parameters with fewer outliers

  15. Acceptability of internet-based interventions for depression in Indonesia

    NARCIS (Netherlands)

    Arjadi, Retha; Nauta, Maaike H.; Bockting, Claudi L.H.

    2018-01-01

    AbstractBackground In Indonesia, internet-based interventions may represent a promising strategy to reduce the mental health gap given that the level of internet usage in the country continues to increase. To check the acceptability of internet-based interventions, this study investigates factors

  16. Evaluation of performance, acceptance, and compliance of an auto-injector in healthy and rheumatoid arthritic subjects measured by a motion capture system.

    Science.gov (United States)

    Xiao, Xiao; Li, Wei; Clawson, Corbin; Karvani, David; Sondag, Perceval; Hahn, James K

    2018-01-01

    The study aimed to develop a motion capture system that can track, visualize, and analyze the entire performance of self-injection with the auto-injector. Each of nine healthy subjects and 29 rheumatoid arthritic (RA) patients with different degrees of hand disability performed two simulated injections into an injection pad while six degrees of freedom (DOF) motions of the auto-injector and the injection pad were captured. We quantitatively measured the performance of the injection by calculating needle displacement from the motion trajectories. The max, mean, and SD of needle displacement were analyzed. Assessments of device acceptance and usability were evaluated by a survey questionnaire and independent observations of compliance with the device instruction for use (IFU). A total of 80 simulated injections were performed. Our results showed a similar level of performance among all the subjects with slightly larger, but not statistically significant, needle displacement in the RA group. In particular, no significant effects regarding previous experience in self-injection, grip method, pain in hand, and Cochin score in the RA group were found to have an impact on the mean needle displacement. Moreover, the analysis of needle displacement for different durations of injections indicated that most of the subjects reached their personal maximum displacement in 15 seconds and remained steady or exhibited a small amount of increase from 15 to 60 seconds. Device acceptance was high for most of the questions (ie, >4; >80%) based on a 0-5-point scale or percentage of acceptance. The overall compliance with the device IFU was high for the first injection (96.05%) and reached 98.02% for the second injection. We demonstrated the feasibility of tracking the motions of injection to measure the performance of simulated self-injection. The comparisons of needle displacement showed that even RA patients with severe hand disability could properly perform self-injection with this

  17. Weighted Maximum-Clique Transversal Sets of Graphs

    OpenAIRE

    Chuan-Min Lee

    2011-01-01

    A maximum-clique transversal set of a graph G is a subset of vertices intersecting all maximum cliques of G. The maximum-clique transversal set problem is to find a maximum-clique transversal set of G of minimum cardinality. Motivated by the placement of transmitters for cellular telephones, Chang, Kloks, and Lee introduced the concept of maximum-clique transversal sets on graphs in 2001. In this paper, we study the weighted version of the maximum-clique transversal set problem for split grap...

  18. The role of natural analogues in safety assessment and acceptability

    International Nuclear Information System (INIS)

    Papp, Toenis

    1987-01-01

    The safety assessment must evaluate the level of safety for a repository, the confidence that can be placed on the assessment and how well the repository can meet the acceptance criteria of the society. Many of the processes and phenomena that govern the long term performance of a deep geologic repository for radioactive waste also take place in nature. To investigate these natural analogues and try to validate the models on which the safety assessment are based is a main task in the effort to build of confidence in the safety assessments. The assessment of the safety of a repository can, however, not only be based on good models. The possible role of natural analogues or natural evidence in other parts of the safety assessment is discussed. Specially with regard to - the need to demonstrate that all relevant processes have been taken into account, and that the important ones have been validated to an acceptable level for relevant parameters spans, -the definition and analysis of external scenarios for the safety assessment and for the claim that all reasonable scenarios have been addressed, - the public confidence in the long-term relevance of the acceptance criteria. (author)

  19. Public acceptance of nuclear power

    International Nuclear Information System (INIS)

    Wildgruber, O.H.

    1990-01-01

    The lecture addresses the question why we need public acceptance work and provides some clues to it. It explains various human behaviour patterns which determine the basics for public acceptance. To some extent, the opposition to nuclear energy and the role the media play are described. Public acceptance efforts of industry are critically reviewed. Some hints on difficulties with polling are provided. The lecture concludes with recommendations for further public acceptance work. (author)

  20. Maximum power demand cost

    International Nuclear Information System (INIS)

    Biondi, L.

    1998-01-01

    The charging for a service is a supplier's remuneration for the expenses incurred in providing it. There are currently two charges for electricity: consumption and maximum demand. While no problem arises about the former, the issue is more complicated for the latter and the analysis in this article tends to show that the annual charge for maximum demand arbitrarily discriminates among consumer groups, to the disadvantage of some [it

  1. The Acceptance of Students with Physical Disabilities by Their Peers in Inclusive and Non-Inclusive Schools in Tehran

    Directory of Open Access Journals (Sweden)

    Narges Adib-Sereshki

    2005-07-01

    Full Text Available Objective: The present research determines the level of peer acceptance of students with physical disabilities in inclusive and non-inclusive schools. A number of studies which have sought to identify the influential factors in the success of inclusive education, have pointed out the acceptance of special need student by his/her regular peers to be a significant variable. Materials & Methods: This is a descriptive investigation. The instrument utilized was the Acceptance Scale (Voelts, 1980. The upper elementary level version that we were used consists of 34 items, two are general friendship items, two are veridicalite items, and the remaining items are acceptance items.Three response options are provided for each item,I agree, I disagree, and maybe. For such reliability, a Spearman-Brown corrected split-half reliability index of +.82 was reported, as well as an alpha coefficient of +.77. A test –retest stability coefficient of .68 was obtained by retesting a sample of 101 children on two occasions separated by three weeks. In Iran, with test retest on 72 students we got Reliability coefficient of .83. The sample includes 179 student boys and girls in grades three to five who had classmates with physical disability in their elementary schools in Tehran. This sample was randomly selected from each of the five different regions in the city of Tehran. In addition, for the purpose of comparison, a sample of fifty-five students in similar grades was studied in regular schools. The effect of gender and type of school (inclusive vs. non-inclusive on students’ acceptance of a peer with physical disability all were assessed. Results: Results indicated that acceptance level is similar in boys and in girls in inclusive schools. The girl and boy students in inclusive schools demonstrated a significantly higher level of peer acceptance than their pupils in non-inclusive schools. This difference was much more noticeable in boy students. The lowest level

  2. Acceptability of screening for early detection of liver disease in hazardous/harmful drinkers in primary care.

    Science.gov (United States)

    Eyles, Caroline; Moore, Michael; Sheron, Nicholas; Roderick, Paul; O'Brien, Wendy; Leydon, Geraldine M

    2013-08-01

    It is estimated that one-quarter of adults in the UK drink at harmful/hazardous levels leading to increased mortality and alcohol liver disease (ALD). The Alcohol Liver Disease Detection Study (ALDDeS) aimed to test out in primary care the feasibility of alcohol misuse screening in adults, using the AUDIT questionnaire, and to assess screening harmful/hazardous alcohol users for ALD using newer non-invasive serum markers of fibrosis. To explore patients' experiences of taking part in ALDDeS and understanding of the delivery and process of screening for ALD using self-report questionnaires and feedback of liver fibrosis risk using levels of non-invasive serum markers. A nested qualitative study based in five primary care practices in the UK. From a sample of patients who were identified as drinking at harmful/hazardous levels, 30 participants were identified by maximum variation sampling for qualitative in-depth interviews. Using the principles of constant comparison the transcribed interviews were thematically analysed. Receiving a postal AUDIT questionnaire was viewed as acceptable by participants. For some completing the AUDIT increased awareness of their hazardous alcohol use and a positive blood test indicating liver fibrosis was a catalyst for behaviour change. For others, a negative blood test result provided a licence to continue drinking at hazardous levels. A limited understanding of safe drinking and of ALD was common. Educational and training needs of primary care professionals must be taken into account, so that patients with marker levels indicating low risk of fibrosis are correctly informed about the likely risks of continuing to drink at the same levels.

  3. Quality, precision and accuracy of the maximum No. 40 anemometer

    Energy Technology Data Exchange (ETDEWEB)

    Obermeir, J. [Otech Engineering, Davis, CA (United States); Blittersdorf, D. [NRG Systems Inc., Hinesburg, VT (United States)

    1996-12-31

    This paper synthesizes available calibration data for the Maximum No. 40 anemometer. Despite its long history in the wind industry, controversy surrounds the choice of transfer function for this anemometer. Many users are unaware that recent changes in default transfer functions in data loggers are producing output wind speed differences as large as 7.6%. Comparison of two calibration methods used for large samples of Maximum No. 40 anemometers shows a consistent difference of 4.6% in output speeds. This difference is significantly larger than estimated uncertainty levels. Testing, initially performed to investigate related issues, reveals that Gill and Maximum cup anemometers change their calibration transfer functions significantly when calibrated in the open atmosphere compared with calibration in a laminar wind tunnel. This indicates that atmospheric turbulence changes the calibration transfer function of cup anemometers. These results call into question the suitability of standard wind tunnel calibration testing for cup anemometers. 6 refs., 10 figs., 4 tabs.

  4. Microneedle technology for immunisation: Perception, acceptability and suitability for paediatric use.

    Science.gov (United States)

    Marshall, Sarah; Sahm, Laura J; Moore, Anne C

    2016-02-03

    To examine published research which explores the perception and acceptability of microneedle technology for immunisation and to investigate the suitability of this technology for paediatric use. A series of keywords and their synonyms were combined in various combinations and permutations using Boolean operators to sequentially search four databases (PubMed, Web of Science, Embase and CINAHL). Following removal of duplications and irrelevant results, 12 research articles were included in the final literature review. The opinions of patients, parents, children and healthcare professionals (HCP) were collated. A positive perception and a high level of acceptability predominated. Microneedle technology research has been focussed on demonstrating efficacy with minimal focus on determining HCP/public perception and acceptability for paediatric use, exemplified by the paucity of studies presented in this review. Commercial viability will depend on HCP/public acceptability of microneedle technology. An effort must be made to identify the barriers to acceptance and to overcome them by increasing awareness and education in stakeholder groups pertaining to the paediatric population. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. The Meaning and Process of Pain Acceptance. Perceptions of Women Living with Arthritis and Fibromyalgia

    Directory of Open Access Journals (Sweden)

    Diane L LaChapelle

    2008-01-01

    Full Text Available BACKGROUND: Within the past 10 years, cognitive-behavioural pain management models have moved beyond the traditional focus on coping strategies and perceived control over pain, to incorporate mindfulness-and acceptance-based approaches. Pain acceptance is the process of giving up the struggle with pain and learning to live life despite pain. Acceptance is associated with lower levels of pain, disability and psychological distress. Relatively little is known, however, about how patients arrive at a state of acceptance without the aid of therapy.

  6. The Public Acceptance of Biofuels and Bioethanol from Straw- how does this affect Geoscience

    Science.gov (United States)

    Jäger, Alexander; Ortner, Tina; Kahr, Heike

    2015-04-01

    The Public Acceptance of Biofuels and Bioethanol from Straw- how does this affect Geoscience The successful use of bioethanol as a fuel requires its widespread acceptance by consumers. Due to the planned introduction of a 10 per cent proportion of bioethanol in petrol in Austria, the University of Applied Sciences Upper Austria carried out a representative opinion poll to collect information on the population's acceptance of biofuels. Based on this survey, interviews with important stakeholders were held to discuss the results and collect recommendations on how to increase the information level and acceptance. The results indicate that there is a lack of interest and information about biofuels, especially among young people and women. First generation bioethanol is strongly associated with the waste of food resources, but the acceptance of the second generation, produced from agricultural remnants like straw from wheat or corn, is considerably higher. The interviewees see more transparent, objective and less technical information about biofuels as an essential way to raise the information level and acceptance rate. As the production of bioethanol from straw is now economically feasible, there is one major scientific question to answer: In which way does the withdrawal of straw from the fields affect the formation of humus and, therefore, the quality of the soil? An interdisciplinary approach of researchers in the fields of bioethanol production, geoscience and agriculture in combination with political decision makers are required to make the technologies of renewable bioenergy acceptable to the population.

  7. Acceptable Risk Analysis for Abrupt Environmental Pollution Accidents in Zhangjiakou City, China.

    Science.gov (United States)

    Du, Xi; Zhang, Zhijiao; Dong, Lei; Liu, Jing; Borthwick, Alistair G L; Liu, Renzhi

    2017-04-20

    Abrupt environmental pollution accidents cause considerable damage worldwide to the ecological environment, human health, and property. The concept of acceptable risk aims to answer whether or not a given environmental pollution risk exceeds a societally determined criterion. This paper presents a case study on acceptable environmental pollution risk conducted through a questionnaire survey carried out between August and October 2014 in five representative districts and two counties of Zhangjiakou City, Hebei Province, China. Here, environmental risk primarily arises from accidental water pollution, accidental air pollution, and tailings dam failure. Based on 870 valid questionnaires, demographic and regional differences in public attitudes towards abrupt environmental pollution risks were analyzed, and risk acceptance impact factors determined. The results showed females, people between 21-40 years of age, people with higher levels of education, public servants, and people with higher income had lower risk tolerance. People with lower perceived risk, low-level risk knowledge, high-level familiarity and satisfaction with environmental management, and without experience of environmental accidents had higher risk tolerance. Multiple logistic regression analysis indicated that public satisfaction with environmental management was the most significant factor in risk acceptance, followed by perceived risk of abrupt air pollution, occupation, perceived risk of tailings dam failure, and sex. These findings should be helpful to local decision-makers concerned with environmental risk management (e.g., selecting target groups for effective risk communication) in the context of abrupt environmental accidents.

  8. Blind and Deaf to Acceptance: The Role of Self-Esteem in Capitalizing on Social Acceptance

    OpenAIRE

    Luerssen, Anna Maud

    2013-01-01

    Across two studies, we evaluated whether people with low self-esteem are less likely to capitalize on, or take full advantage of, their romantic partners' accepting behaviors. We conceptualized capitalization as the tendency to perceive acceptance when it occurs, and to experience positive changes in affect and relationship satisfaction when acceptance is perceived. We found that participants with low self-esteem under-perceived their partners' acceptance, both in daily life and in the labora...

  9. Adolescent beliefs about the acceptability of dating violence: does violent behavior change them?

    Science.gov (United States)

    Mueller, Victoria; Jouriles, Ernest N; McDonald, Renee; Rosenfield, David

    2013-01-01

    This longitudinal study examined the interplay between teens' beliefs about the acceptability of dating violence and dating violence perpetration. The final sample included 82 teens aged 14 to 17 years. Families were recruited from truancy courts and juvenile probation and victim services offices. Teens participated in a baseline and a follow-up assessment spaced 3 months apart. At each assessment, teens reported on their beliefs about dating violence acceptability and their dating violence perpetration. Dating violence perpetration at baseline predicted beliefs accepting of violence at follow-up, after accounting for baseline levels of beliefs. Beliefs at baseline, however, did not predict dating violence perpetration at follow-up. Dating violence perpetration may lead to beliefs more accepting of such violence.

  10. The influence of frailty syndrome on acceptance of illness in elderly patients with chronic obstructive pulmonary disease

    Directory of Open Access Journals (Sweden)

    Uchmanowicz I

    2016-09-01

    Full Text Available Izabella Uchmanowicz,1 Beata Jankowska-Polanska,1 Mariusz Chabowski,2 Bartosz Uchmanowicz,1 Andrzej M Fal3 1Department of Clinical Nursing, Faculty of Health Science, Wroclaw Medical University, 2Division of Nursing in Surgical Procedures, Department of Clinical Nursing, Faculty of Health Science, Wroclaw Medical University, 3Department of Healthcare Organisation and Economics, National Institute of Public Health, National Institute of Hygiene, Warsaw, Poland Abstract: COPD is one of the most debilitating diseases. Frailty syndrome and advanced age may decrease the acceptance of illness, quality of life, and worsen health conditions in these patients, as well as lead to an increase in health care expenses. The aim of the study was to assess how the level of frailty affects the acceptance of illness in elderly patients with COPD. We also aimed to evaluate the associations between sociodemographic and clinical factors and the level of acceptance of illness, anxiety, and frailty in this group of patients. The study included 102 COPD patients with a mean age of 63.2 (standard deviation =6.5 years and grades I (3%, II (37%, III (52%, and IV (8% by Global Initiative for Chronic Obstructive Lung Disease. The Polish versions of the Acceptance of Illness Scale and Tilburg frailty indicator were used. Frailty syndrome was found in 77 (75.5% patients, with an average score of 7.42 (standard deviation =2.24. Coexisting diseases such as hypertension (46.07%, coronary artery disease (32.35%, heart failure (28.43%, diabetes (18.63%, and heart arrhythmia (9.8% were found among the subjects. The overall level of acceptance of illness was 20.6 (standard deviation =7.62. A lower level of acceptance of illness was associated with a higher level of frailty, especially in the physical and social domain. Elderly patients with severe COPD are more prone to frailty and decreased acceptance of their disease in comparison to patients with other chronic diseases

  11. Heart and lung organ offer acceptance practices of transplant programs are associated with waitlist mortality and organ yield.

    Science.gov (United States)

    Wey, Andrew; Valapour, Maryam; Skeans, Melissa A; Salkowski, Nicholas; Colvin, Monica; Kasiske, Bertram L; Israni, Ajay K; Snyder, Jon J

    2018-04-19

    Variation in heart and lung offer acceptance practices may affect numbers of transplanted organs and create variability in waitlist mortality. To investigate these issues, offer acceptance ratios, or adjusted odds ratios, for heart and lung transplant programs individually and for all programs within donation service areas (DSAs) were estimated using offers from donors recovered July 1, 2016-June 30, 2017. Logistic regressions estimated the association of DSA-level offer acceptance ratios with donor yield and local placement of organs recovered in the DSA. Competing risk methodology estimated the association of program-level offer acceptance ratios with incidence and rate of waitlist removals due to death or becoming too sick to undergo transplant. Higher DSA-level offer acceptance was associated with higher yield (odds ratios [ORs]: lung, 1.04 1.11 1.19 ; heart, 1.09 1.21 1.35 ) and more local placement of transplanted organs (ORs: lung, 1.01 1.12 1.24 ; heart, 1.47 1.69 1.93 ). Higher program-level offer acceptance was associated with lower incidence of waitlist removal due to death or becoming too sick to undergo transplant (hazard ratios [HRs]: heart, 0.80 0.86 0.93 ; lung, 0.67 0.75 0.83 ), but not with rate of waitlist removal (HRs: heart, 0.91 0.98 1.06 ; lung, 0.89 0.99 1.10 ). Heart and lung offer acceptance practices affected numbers of transplanted organs and contributed to program-level variability in the probability of waitlist mortality. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  12. Multi-Canister Overpack (MCO) Combustible Gas Management Leak Test Acceptance Criteria (OCRWM)

    International Nuclear Information System (INIS)

    SHERRELL, D.L.

    2000-01-01

    The purpose of this document is to support the Spent Nuclear Fuel Project's combustible gas management strategy while avoiding the need to impose any requirements for oxygen free atmospheres within storage tubes that contain multi-canister overpacks (MCO). In order to avoid inerting requirements it is necessary to establish and confirm leak test acceptance criteria for mechanically sealed and weld sealed MCOs that are adequte to ensure that, in the unlikely event the leak test results for any MCO were to approach either of those criteria, it could still be handled and stored in stagnant air without compromising the SNF Project's overall strategy to prevent accumulation of combustible gas mixtures within MCOs or within their surroundings. To support that strategy, this document: (1) establishes combustible gas management functions and minimum functional requirements for the MCO's mechanical seals and closure weld(s); (2) establishes a maximum practical value for the minimum required initial MCO inert backfill gas pressure; and (3) based on items 1 and 2, establishes and confirms leak test acceptance criteria for the MCO's mechanical seal and final closure weld(s)

  13. Development and application of a conceptual approach for defining high-level waste

    International Nuclear Information System (INIS)

    Croff, A.G.; Forsberg, C.W.; Kocher, D.C.; Cohen, J.J.; Smith, C.F.; Miller, D.E.

    1986-01-01

    This paper presents a conceptual approach to defining high-level radioactive waste (HLW) and a preliminary quantitative definition obtained from an example implementation of the conceptual approach. On the basis of the description of HLW in the Nuclear Waste Policy Act of 1982, we have developed a conceptual model in which HLW has two attributes: HLW is (1) highly radioactive and (2) requires permanent isolation via deep geologic disposal. This conceptual model results in a two-dimensional waste categorization system in which one axis, related to ''requires permanent isolation,'' is associated with long-term risks from waste disposal and the other axis, related to ''highly radioactive,'' is associated with short-term risks from waste management and operations; this system also leads to the specification of categories of wastes that are not HLW. Implementation of the conceptual model for defining HLW was based primarily on health and safety considerations. Wastes requiring permanent isolation via deep geologic disposal were defined by estimating the maximum concentrations of radionuclides that would be acceptable for disposal using the next-best technology, i.e., greater confinement disposal (GCD) via intermediate-depth burial or engineered surface structures. Wastes that are highly radioactive were defined by adopting heat generation rate as the appropriate measure and examining levels of decay heat that necessitate special methods to control risks from operations in a variety of nuclear fuel-cycle situations. We determined that wastes having a power density >200 W/m 3 should be considered highly radioactive. Thus, in the example implementation, the combination of maximum concentrations of long-lived radionuclides that are acceptable for GCD and a power density of 200 W/m 3 provides boundaries for defining wastes that are HLW

  14. Acceptance test report for the AY-102 ENRAF densitometer

    International Nuclear Information System (INIS)

    Huber, J.H.

    1998-01-01

    On February 11, 1998, the AY-1 02, Riser 15E ENRAF Densitometer was acceptance tested per HNF-SD-WM-ATP-077. The test was performed at the Department of Energy's Hanford Site, 200 East Area, building MO-407. The test validated the functionality of the Densitometer for use by project W-320, C-1 06 Retrieval. The purpose of the test procedure was to verify the functionality of the ENRAF Series 854 ATG densitometer. Typically, all ENRAF Series 854 ATGs are acceptance tested before transport to the field. The ATP, as performed for level gauges, sets default program values within the gauge and verifies the gauge's force transducer calibration

  15. Wind energy and social acceptability

    International Nuclear Information System (INIS)

    Feurtey, E.

    2008-01-01

    This document was prepared as part of a decentralized collaboration between Quebec and France to share knowledge regarding strategies and best practices in wind power development. It reviewed the social acceptance of Quebec's wind power industry, particularly at the municipal level. The wind industry is growing rapidly in Quebec, and this growth has generated many reactions ranging from positive to negative. The purpose of this joint effort was to describe decision making steps to developing a wind turbine array. The history of wind development in Quebec was discussed along with the various hardware components required in a wind turbine and different types of installations. The key element in implementing wind turbine arrays is to establish public acceptance of the project, followed by a good regulatory framework to define the roles and responsibilities of participants. The production of electricity from wind turbines constitutes a clean and renewable source of energy. Although it is associated with a reduction in greenhouse gas emissions, this form of energy can also have negative environmental impacts, including noise. The revenues generated by wind parks are important factors in the decision making process. Two case studies in Quebec were presented. refs., tabs., figs.

  16. Possible ecosystem impacts of applying maximum sustainable yield policy in food chain models.

    Science.gov (United States)

    Ghosh, Bapan; Kar, T K

    2013-07-21

    This paper describes the possible impacts of maximum sustainable yield (MSY) and maximum sustainable total yield (MSTY) policy in ecosystems. In general it is observed that exploitation at MSY (of single species) or MSTY (of multispecies) level may cause the extinction of several species. In particular, for traditional prey-predator system, fishing under combined harvesting effort at MSTY (if it exists) level may be a sustainable policy, but if MSTY does not exist then it is due to the extinction of the predator species only. In generalist prey-predator system, harvesting of any one of the species at MSY level is always a sustainable policy, but harvesting of both the species at MSTY level may or may not be a sustainable policy. In addition, we have also investigated the MSY and MSTY policy in a traditional tri-trophic and four trophic food chain models. Copyright © 2013 Elsevier Ltd. All rights reserved.

  17. [Organization of socially acceptable working hours in nursing].

    Science.gov (United States)

    Büssing, A; Glaser, J

    1994-05-01

    Three dimensions in the structure of the working hour system of nurses, rendering them socially acceptable, are becoming important: duration of the working day, the time of day which is being worked and the distribution of working hours. The latter two are of particular importance because flexible shift is becoming the dominant pattern in nursing. Six indicators are discussed as criteria for social acceptability: security of employment which includes access to the labour-market, level of income, health, opportunity for social relationships, social participation, and autonomy. Responses of 297 nurses in one General Hospital taking part in a study, were analysed to examine empirically the concept of 'socially acceptable structure of the working hours'. Ideal and factual patterns are considered first. Secondly aspects of autonomy are considered and the way this depends on time, thirdly the criteria used to define 'social acceptability' are examined for validity. Results show firstly the cross contrast between the hospital's expectation and the nurses' wishes with regard to working hours. Furthermore, inspite of the demand for flexibility, staff have very little choice and there is little sign of joint decision making. Thirdly results show that health, interpersonal and social aspects are of special importance and that, correspondingly, in the view of nurses, financial and practical problems are of lesser importance in their every day life.

  18. Parental social coaching promotes adolescent peer acceptance across the middle school transition.

    Science.gov (United States)

    Gregson, Kim D; Tu, Kelly M; Erath, Stephen A; Pettit, Gregory S

    2017-09-01

    The present study investigated longitudinal associations between behavioral and cognitive dimensions of parental social coaching (i.e., advice about how to behave or think about peer challenges) and young adolescents' peer acceptance, and whether such associations are moderated by youths' social skills. Time 1 (T1) participants included 123 young adolescents (M age = 12.03 years; 50% boys; 58.5% European American). Parents gave open-ended reports about their social coaching to hypothetical peer stress scenarios, which were coded from low to high quality on behavioral and cognitive dimensions. Parents and teachers reported on adolescent prosocial behavior (i.e., social-behavioral skills), and adolescents reported on their social appraisals and social self-efficacy (i.e., social-cognitive skills). At T1 (before the first year of middle school) and Time 2 (approximately 10 months later, after the first year of middle school), parents and teachers rated adolescent peer acceptance. Analyses revealed that parents' prosocial behavioral advice and benign cognitive framing independently predicted adolescents' higher peer acceptance prospectively (controlling for earlier levels of peer acceptance). Furthermore, adolescent social skills moderated links between coaching and peer acceptance. Specifically, adolescents with higher, but not lower, social-cognitive skills became more accepted in the context of higher-quality coaching, supporting a "capitalization" pattern, such that these youth may be better able to utilize coaching suggestions. Results underscore the utility of parents' behavioral advice and cognitive framing for adolescent peer adjustment across the middle school transition and suggest that optimal social-coaching strategies may depend in part on adolescent social skill level. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  19. Electronic alerts and clinician turnover: the influence of user acceptance.

    Science.gov (United States)

    Hysong, Sylvia J; Spitzmuller, Christiane; Espadas, Donna; Sittig, Dean F; Singh, Hardeep

    2014-11-01

    Use of certain components of electronic health records (EHRs), such as EHR-based alerting systems (EASs), might reduce provider satisfaction, a strong precursor to turnover. We examined the impact of factors likely to influence providers' acceptance of an alerting system, designed to facilitate electronic communication in outpatient settings, on provider satisfaction, intentions to quit, and turnover. We conducted a cross-sectional Web-based survey of EAS-related practices from a nationwide sample of primary care providers (PCPs) practicing at Department of Veterans Affairs (VA) medical facilities. Of 5001 invited VA PCPs, 2590 completed the survey. We relied on Venkatesh's Unified Theory of Acceptance and Use of Technology to create survey measures of 4 factors likely to impact user acceptance of EAS: supportive norms, monitoring/ feedback, training, and providers' perceptions of the value (PPOV) of EASs to provider effectiveness. Facility-level PCP turnover was measured via the VA's Service Support Center Human Resources Cube. Hypotheses were tested using structural equation modeling. After accounting for intercorrelations among predictors, monitoring/feedback regarding EASs significantly predicted intention to quit (b = 0.30, P < .01), and PPOV of EASs predicted both overall provider satisfaction (b = 0.58, P < .01) and facility-level provider turnover levels (b = -0.19, P < .05), all without relying on any intervening mechanisms. Design, implementation, and use of EASs might impact provider satisfaction and retention. Institutions should consider strategies to help providers perceive greater value in these clinical tools.

  20. Teaching via Mobile Phone: A Case Study on Malaysian Teachers' Technology Acceptance and Readiness

    Science.gov (United States)

    Ismail, Issham; Bokhare, Siti F.; Azizan, Siti N.; Azman, Nizuwan

    2013-01-01

    The purpose of this study is to identify the level of technology acceptance among school teachers from the components of awareness and motivation, training and courses, training design, and supports and facilities. This study also aims to investigate whether teachers' acceptance of technology could influence their readiness for the pedagogical use…

  1. Offer acceptance practices and geographic variability in allocation model for end-stage liver disease at transplant.

    Science.gov (United States)

    Wey, Andrew; Pyke, Joshua; Schladt, David P; Gentry, Sommer E; Weaver, Tim; Salkowski, Nicholas; Kasiske, Bertram L; Israni, Ajay K; Snyder, Jon J

    2018-04-01

    Offer acceptance practices may cause geographic variability in allocation Model for End-Stage Liver Disease (aMELD) score at transplant and could magnify the effect of donor supply and demand on aMELD variability. To evaluate these issues, offer acceptance practices of liver transplant programs and donation service areas (DSAs) were estimated using offers of livers from donors recovered between January 1, 2016, and December 31, 2016. Offer acceptance practices were compared with liver yield, local placement of transplanted livers, donor supply and demand, and aMELD at transplant. Offer acceptance was associated with liver yield (odds ratio, 1.32; P offer acceptance (r = 0.09; P = 0.50). Additionally, the association between DSA-level donor-to-candidate ratios and aMELD at transplant did not change after adjustment for offer acceptance. The average squared difference in median aMELD at transplant across DSAs was 24.6; removing the effect of donor-to-candidate ratios reduced the average squared differences more than removing the effect of program-level offer acceptance (33% and 15% reduction, respectively). Offer acceptance practices and donor-to-candidate ratios independently contributed to geographic variability in aMELD at transplant. Thus, neither offer acceptance nor donor-to-candidate ratios can explain all of the geographic variability in aMELD at transplant. Liver Transplantation 24 478-487 2018 AASLD. © 2018 by the American Association for the Study of Liver Diseases.

  2. Electricity supply between acceptance, acceptability and social compatibility; Energieversorgung zwischen Akzeptanz, Akzeptabilitaet und Sozialvertraeglichkeit

    Energy Technology Data Exchange (ETDEWEB)

    Schubert, Katharina; Koch, Marco K. [Bochum Univ. (Germany). Lehrstuhl Energiesysteme und Energiewirtschaft (LEE)

    2012-11-01

    Acceptance promotion is supposed to be an indispensable premise for a successful realization of an energy concept. The contribution identifies deficiencies of the energy policy, including intransparency, complexity of decision procedures, for instance in case of the so called energy transmission line extension acceleration law, that has caused irritation and anger in the public. The justification of acceptance promotion is questioned in connection with the German nuclear policy reversal following the Fukushima accident. A research program ''public acceptance of large-scale power plants for electricity generation'' is presented. The issues criteria and limits of acceptability are of main importance for this discussion.

  3. [Longitudinal survey and analysis among Chengdu residents on cognition and acceptance of implant dentures].

    Science.gov (United States)

    Zuo, Yanping; Wang, Yongyue; Wang, Luming; Du, Bing

    2014-08-01

    This study aims to survey the cognition and acceptance of implant dentures among Chengdu residents in 2005 and 2013 and to comparatively analyze the differences and influencing factors. A questionnaire was designed for this study. Its main content included basic demographics of respondents (gender, age, cultural level, and income level), cognition level of implant dentures (concept and main characteristics of implant dentures), main concern of respondents regarding implant dentures and medical institutions, and acceptance level of the price of implant dentures, among others. The sampling survey was carried out among Chengdu residents in 2005 and 2013 using the designed questionnaire. The results were then statistically analyzed. Up to 908 valid questionnaires in 2005 and 905 valid questionnaires in 2013 were obtained. The level of cognition of implant dentures was higher in 2013 than in 2005, and the correlation between cognition and cultural level and that between cognition and income level were both positive. However, the correlation between cognition and age was negative. The success rate for implant dentures and medical treatment technology of medical institutions were the factors that the respondents were mainly concerned with. The main methods for disseminating information on implant dentures were the internet, television, newspapers, magazines, and introduction by friends. With the development of the society's economy and the improvement of culture and income level of Chengdu residents, the cognition and acceptance level of implant dentures have gradualy increased. Meanwhile, health education and medical technology still need to be strengthened.

  4. Zone of Acceptance Under Performance Measurement: Does Performance Information Affect Employee Acceptance of Management Authority?

    DEFF Research Database (Denmark)

    Nielsen, Poul Aaes; Jacobsen, Christian Bøtcher

    2018-01-01

    Public sector employees have traditionally enjoyed substantial influence and bargaining power in organizational decision making, but few studies have investigated the formation of employee acceptance of management authority. Drawing on the ‘romance of leadership’ perspective, we argue that perfor......Public sector employees have traditionally enjoyed substantial influence and bargaining power in organizational decision making, but few studies have investigated the formation of employee acceptance of management authority. Drawing on the ‘romance of leadership’ perspective, we argue...... that performance information shapes employee attributions of leader quality and perceptions of a need for change in ways that affect their acceptance of management authority, conceptualized using Simon’s notion of a ‘zone of acceptance.’ We conducted a survey experiment among 1,740 teachers, randomly assigning...... true performance information about each respondent’s own school. When employees were exposed to signals showing low or high performance, their acceptance of management authority increased, whereas average performance signals reduced employee acceptance of management authority. The findings suggest...

  5. Acceptability of male condom: An Indian scenario

    Directory of Open Access Journals (Sweden)

    Balaiah Donta

    2014-01-01

    Full Text Available The National Family Planning Programme of India had introduced condom as one of the family planning methods in the late1960s. Condom was promoted as a family planning method through social marketing since its inception. With the increasing prevalence and incidence of sexually transmitted infections (STIs including HIV/AIDS, condom was also promoted as a dual method for protection against both unintended pregnancies as well as sexually transmitted infections. Despite efforts at various levels, the overall use of condom among couples in India is low. Here we present literature review of studies to understand the condom acceptability among couples in India. Specifically, the paper assesses research and programmes that have been carried out to increase the use of condom among couples; determinants of condom use; reason for not using condom; and perception versus experience of condom failure. The reported problems related to condom use included non acceptance by partner, perceived ineffectiveness, less comfort, lack of sexual satisfaction, husband′s alcohol use, depression, and anxiety, and not available at that instant. The role of media in the promotion of condom use was indicated as an important way to increase awareness and use. Multiple strategies would help in acceptance of male condom.

  6. Occurrence and Impact of Insects in Maximum Growth Plantations

    Energy Technology Data Exchange (ETDEWEB)

    Nowak, J.T.; Berisford, C.W.

    2001-01-01

    Investigation of the relationships between intensive management practices and insect infestation using maximum growth potential studies of loblolly pine constructed over five years using a hierarchy of cultural treatments-monitoring differences in growth and insect infestation levels related to the increasing management intensities. This study shows that tree fertilization can increase coneworm infestation and demonstrated that tip moth management tree growth, at least initially.

  7. 49 CFR 230.24 - Maximum allowable stress.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Maximum allowable stress. 230.24 Section 230.24... Allowable Stress § 230.24 Maximum allowable stress. (a) Maximum allowable stress value. The maximum allowable stress value on any component of a steam locomotive boiler shall not exceed 1/4 of the ultimate...

  8. Some problems in the acceptability of implementing radiation protection programs

    International Nuclear Information System (INIS)

    Neill, R.H.

    1997-01-01

    The three fundamentals that radiation protection programs are based upon are; 1) establishing a quantitative correlation between radiation exposure and biological effects in people; 2) determining a level of acceptable risk of exposure; and 3) establishing systems to measure the radiation dose to insure compliance with the regulations or criteria. The paper discusses the interrelationship of these fundamentals, difficulties in obtaining a consensus of acceptable risk and gives some examples of problems in identifying the most critical population-at-risk and in measuring dose. Despite such problems, it is recommended that we proceed with the existing conservative structure of radiation protection programs based upon a linear no threshold model for low radiation doses to insure public acceptability of various potential radiation risks. Voluntary compliance as well as regulatory requirements should continue to be pursued to maintain minimal exposure to ionizing radiation. (author)

  9. Defining the drivers for accepting decision making automation in air traffic management.

    Science.gov (United States)

    Bekier, Marek; Molesworth, Brett R C; Williamson, Ann

    2011-04-01

    Air Traffic Management (ATM) operators are under increasing pressure to improve the efficiency of their operation to cater for forecasted increases in air traffic movements. One solution involves increasing the utilisation of automation within the ATM system. The success of this approach is contingent on Air Traffic Control Operators' (ATCOs) willingness to accept increased levels of automation. The main aim of the present research was to examine the drivers underpinning ATCOs' willingness to accept increased utilisation of automation within their role. Two fictitious scenarios involving the application of two new automated decision-making tools were created. The results of an online survey revealed traditional predictors of automation acceptance such as age, trust and job satisfaction explain between 4 and 7% of the variance. Furthermore, these predictors varied depending on the purpose in which the automation was to be employed. These results are discussed from an applied and theoretical perspective. STATEMENT OF RELEVANCE: Efficiency improvements in ATM are required to cater for forecasted increases in air traffic movements. One solution is to increase the utilisation of automation within Air Traffic Control. The present research examines the drivers underpinning air traffic controllers' willingness to accept increased levels of automation in their role.

  10. A Mixed-Methods Study on Acceptability, Tolerability, and Substitution of Brown Rice for White Rice to Lower Blood Glucose Levels among Nigerian Adults

    Directory of Open Access Journals (Sweden)

    Sally N. Adebamowo

    2017-07-01

    Full Text Available BackgroundWhole-grain products such as brown rice have been associated with lower risk of metabolic disorders including diabetes. We examined the acceptability and tolerability of substituting brown rice for white rice and the feasibility of introducing brown rice into the diet through a long-term trial to lower the risk of type 2 diabetes.MethodsFifty-one adults residing in Abuja, Nigeria, participated in this study. Using purposeful sampling for focus group discussions (FGDs, participants were enrolled based on their age (19–25 vs. 40–60 years and body mass index (BMI (normal weight vs. overweight/obese. Participants tasted four meals with different constitution of brown and white rice (25:75%, 50:50%, 75:25%, and 100% brown rice. Twelve FGDs were conducted, six before and six after the food tasting. Two-hour postprandial blood glucose was measured after consumption of each rice meal.ResultsThe mean age of the participants was 39 (±14 years, their mean BMI was 25.6 (±5.2 and about half of them were male. Most of the participants (61% reported that rice was their main source of carbohydrate and 67% consumed rice at least five times/week. Before the food tasting, participants considered white polished rice superior to brown rice with regard to quality, taste, and nutritional value. After the food tasting, most of the participants (49% indicated a preference for the 100% brown rice, 19% preferred the 25% brown rice, 18% preferred the 50% brown rice, and 7% preferred the 75% brown rice meals. Factors that may affect the acceptability of brown rice include its appearance, longer cooking time, cost, limited availability, and poor appreciation of its nutritional value. In general, 2-h postprandial glucose levels were lower, after consumption of meals with higher proportion of brown rice.ConclusionThis study provides valuable insight into the acceptability of brown rice as a substitute for white rice in Nigeria. If confirmed in larger studies

  11. Pattern of parental acceptance of management techniques used in pediatric dentistry.

    Science.gov (United States)

    Peretz, Benjamin; Kharouba, Johnny; Blumer, Sigalit

    2013-01-01

    To evaluate parents' acceptance of management techniques in Israeli pediatric dental clinics. Ninety parents who accompanied their children to three pediatric dental clinics provided information on selected parameters including their attitudes about management techniques. 68.9% of the parents preferred to stay in the treatment room. The most accepted technique was positive reinforcement (81.1%) followed by tell-show-do (TSD) (76.7%, with younger parents more accepting than older, p = 0.049). The least accepted techniques were restraint (1.1%) and voice control (7.8%, especially by parents with the highest dental anxiety, p = 0.002). Sedation was unacceptable by 15.6% of the parents: those with the lowest dental anxiety agreed to sedation significantly more than those with greater dental anxiety (p = 0.031). Parents preferred more positive approaches and management techniques that involve demonstrations geared for the child's level of understanding. Restraint and voice control were more strongly rejected than sedation.

  12. Public acceptance of a hypothetical Ebola virus vaccine in Aceh, Indonesia: A hospital-based survey

    Directory of Open Access Journals (Sweden)

    Harapan Harapan

    2017-04-01

    Full Text Available Objective: To determine the acceptance towards a hypothetical Ebola virus vaccine (EVV and associated factors in a non-affected country, Indonesia. Methods: A hospital-based, cross-sectional study was conducted in four regencies of Aceh, Indonesia. A set of pre-tested questionnaires was used to obtain information on acceptance towards EVV and a range of explanatory variables. Associations between EVV acceptance and explanatory variables were tested using multi-steps logistic regression analysis and the Spearman's rank correlation. Results: Participants who had knowledge on Ebola virus disease (EVD were 45.3% (192/424 and none of the participants achieved 80% correct answers on the knowledge regarding to EVD. About 73% of participants expressed their willingness to receive the EVV. Education attainment, occupation, monthly income, have heard regarding to EVD previously, socioeconomic level, attitude towards vaccination practice and knowledge regarding to EVD were associated significantly with acceptance towards EVV in univariate analysis (P < 0.05. In the final multivariate model, socio-economic level, attitude towards vaccination practice and knowledge regarding to EVD were the independent explanatory variables for EVV acceptance. Conclusions: The knowledge of EVD was low, but this minimally affected the acceptance towards EVV. However, to facilitate optimal uptake of EVV, dissemination of vaccine-related information prior to its introduction is required.

  13. Beliefs about health, illness and acceptance of the limitations of chronic somatic disease inpeople with psoriasis

    Directory of Open Access Journals (Sweden)

    Joanna Miniszewska

    2014-09-01

    Full Text Available Introduction: Occurrence of a chronic disease means for an affected person significant changes in life and the disease itself can be seen in various categories. Assessment of the disease often affects its acceptance, which in turn affects the choice of coping strategies in dealing with it. Beliefs about psoriasis, a chronic skin disease that causes numerous psychosocial consequences, may influence its acceptance. Aim of the study: To determine the relationship between the way the disease is perceived, beliefs about having an impact on one’s own health, and acceptance of limitations of the disease. Material and methods: The study included 61 psoriasis patients. The following measures were employed: Acceptance of Illness Scale (AIS, Disease-Related Appraisals Scale (SOWC, Multidimensional Health Locus of Control Scale (MHLC, Self-Administered Psoriasis Area and Severity Index (SAPASI. Results: Sex and occurrence of the disease in family members did not differentiate the respondents in terms of the level of acceptance of the disease. Their perception of the disease as a threat, harm, obstacles and imbalances of life and treatment of health in terms of a chance, and severity of psoriasis measured with SAPASI correlated negatively with the disease acceptance. Internal health locus of control affected it positively. Two homogeneous subgroups were separated. Assessment of the disease in terms of an obstacle/loss, internal health locus of control and treatment of health in terms of a chance allow to predict the level of psoriasis acceptance. Conclusions: People’s beliefs relating to their own illness and their belief in having (or not an influence on their own health are associated with the level of accepting the disease. In other words, beliefs about a disease correlate with adaptation to it.

  14. The CMS High Level Trigger System: Experience and Future Development

    CERN Document Server

    Bauer, Gerry; Bowen, Matthew; Branson, James G; Bukowiec, Sebastian; Cittolin, Sergio; Coarasa, J A; Deldicque, Christian; Dobson, Marc; Dupont, Aymeric; Erhan, Samim; Flossdorf, Alexander; Gigi, Dominique; Glege, Frank; Gomez-Reino, R; Hartl, Christian; Hegeman, Jeroen; Holzner, André; Y L Hwong; Masetti, Lorenzo; Meijers, Frans; Meschi, Emilio; Mommsen, R K; O'Dell, Vivian; Orsini, Luciano; Paus, Christoph; Petrucci, Andrea; Pieri, Marco; Polese, Giovanni; Racz, Attila; Raginel, Olivier; Sakulin, Hannes; Sani, Matteo; Schwick, Christoph; Shpakov, Dennis; Simon, M; Spataru, A C; Sumorok, Konstanty

    2012-01-01

    The CMS experiment at the LHC features a two-level trigger system. Events accepted by the first level trigger, at a maximum rate of 100 kHz, are read out by the Data Acquisition system (DAQ), and subsequently assembled in memory in a farm of computers running a software high-level trigger (HLT), which selects interesting events for offline storage and analysis at a rate of order few hundred Hz. The HLT algorithms consist of sequences of offline-style reconstruction and filtering modules, executed on a farm of 0(10000) CPU cores built from commodity hardware. Experience from the operation of the HLT system in the collider run 2010/2011 is reported. The current architecture of the CMS HLT, its integration with the CMS reconstruction framework and the CMS DAQ, are discussed in the light of future development. The possible short- and medium-term evolution of the HLT software infrastructure to support extensions of the HLT computing power, and to address remaining performance and maintenance issues, are discussed.

  15. The impact of accepting biological changes during adolescence on the severity of depression symptoms

    Directory of Open Access Journals (Sweden)

    Radziwiłłowicz Wioletta

    2016-12-01

    Full Text Available The aim of the study was to establish whether any relation exists between depression symptoms and the extent to which adolescents accept the changes their bodies undergo (the physical changes they experience at different stages of growing up, and if the connection does exist - is it gender-related. Method: Data were collected from four sub-groups: younger girls (aged 12-13, older girls (aged 17-18, younger boys (aged 12-13, and older boys (aged 17-18. The participants were asked to complete questionnaires that allow to measure the subjective intensity of depression symptoms (BDI, the current stage of biological changes (the Tanner scale and whether these changes are accepted by the individual who experiences them (the original Feelings Towards the Body questionnaire. Results: The less adolescents accept the changes in their bodies, the higher depression symptoms they demonstrate. For younger girls, older girls and older boys, no links were established between levels of accepting bodily changes and early/late maturation (in comparison with the population of their peers. For younger boys, the later the stage of their development, the less likely they are to accept the changes in their bodies. Girls report more intense depression symptoms than boys do, but their levels of accepting changes that occur around puberty are significantly lower only when compared to those of older boys. Conclusions: Whether biological changes during puberty (mainly feelings of anxiety and shame related to the body are accepted or not, was proven to be a significant predictor of more intense depression symptoms.

  16. The acceptability of arguments in favour of and against the Iraq War

    Directory of Open Access Journals (Sweden)

    Juan LaLlave

    2005-10-01

    Full Text Available This paper reports on research based on an experimental questionnaire designed using the logic and the basic structure of the Moral Judgment Test (MJT by Lind (1982. The study aims at understanding how respondents' acceptance of political arguments may have contributed to the lack of international support for the Iraq war and/or to the failure to prevent a preemptive attack. It examines factors, which respondents may have relied on in their acceptance of the arguments. The instrument consisted of three components: (1 A brief vignette on the declared beginning (March 19, 2003 and ending (May 1, 2003 of major operations in Iraq. (2 Respondents' own agreement with the need for the war. (3 Twelve arguments from political speeches: Six arguments by Bush and Blair "in favor of" (pro, and six arguments by Chirac and Schroeder "against" (con the need for the Iraq war. We scored each argument using Kohlberg's (1984 stage theory and Commons' Hierarchical Complexity Scoring System (HCSS (Commons et al., 2004, which identifies hierarchical features in the structure. Using Kempf's (2003 Cognitive Escalation and De-Escalation Model (CEDM we scored each argument sentence for details. Our sample consists of (N = 397 respondents of which were 56.4% women, 24.2% men, and 19.4% did not specify. The largest groups consisted of 71% Germans, 37.2% Catholics, 74.3% between the ages of 18-20 with high school education. Another group consisted of 8.6% Americans with a broader spectrum in age and higher educational level. Using 7 point Likert scales, respondents rated whether they would have rejected or accepted the main point of each argument, whether the main point of the argument seemed illusory or realistic, and whether the emotion evoked by the argument was destructive or constructive. The analysis of the data aimed at determining which within subject and between subject design factors were relevant in predicting respondents' acceptance of arguments and the

  17. A maximum power point tracking for photovoltaic-SPE system using a maximum current controller

    Energy Technology Data Exchange (ETDEWEB)

    Muhida, Riza [Osaka Univ., Dept. of Physical Science, Toyonaka, Osaka (Japan); Osaka Univ., Dept. of Electrical Engineering, Suita, Osaka (Japan); Park, Minwon; Dakkak, Mohammed; Matsuura, Kenji [Osaka Univ., Dept. of Electrical Engineering, Suita, Osaka (Japan); Tsuyoshi, Akira; Michira, Masakazu [Kobe City College of Technology, Nishi-ku, Kobe (Japan)

    2003-02-01

    Processes to produce hydrogen from solar photovoltaic (PV)-powered water electrolysis using solid polymer electrolysis (SPE) are reported. An alternative control of maximum power point tracking (MPPT) in the PV-SPE system based on the maximum current searching methods has been designed and implemented. Based on the characteristics of voltage-current and theoretical analysis of SPE, it can be shown that the tracking of the maximum current output of DC-DC converter in SPE side will track the MPPT of photovoltaic panel simultaneously. This method uses a proportional integrator controller to control the duty factor of DC-DC converter with pulse-width modulator (PWM). The MPPT performance and hydrogen production performance of this method have been evaluated and discussed based on the results of the experiment. (Author)

  18. Radioactive waste management: review on clearance levels and acceptance criteria legislation, requirements and standards.

    Science.gov (United States)

    Maringer, F J; Suráň, J; Kovář, P; Chauvenet, B; Peyres, V; García-Toraño, E; Cozzella, M L; De Felice, P; Vodenik, B; Hult, M; Rosengård, U; Merimaa, M; Szücs, L; Jeffery, C; Dean, J C J; Tymiński, Z; Arnold, D; Hinca, R; Mirescu, G

    2013-11-01

    In 2011 the joint research project Metrology for Radioactive Waste Management (MetroRWM)(1) of the European Metrology Research Programme (EMRP) started with a total duration of three years. Within this project, new metrological resources for the assessment of radioactive waste, including their calibration with new reference materials traceable to national standards will be developed. This paper gives a review on national, European and international strategies as basis for science-based metrological requirements in clearance and acceptance of radioactive waste. © 2013 Elsevier Ltd. All rights reserved.

  19. Field studies to determine acceptable levels of contamination at former UK nuclear testing sites, Maralinga and Emu in Australia

    International Nuclear Information System (INIS)

    Davy, D.R.

    1988-01-01

    The Maralinga and Emu regions of South Australia were used between 1953 and 1961 for the UK nuclear weapon development program. Two types of trials were conducted - the major trials involved the detonation of fission weapons and the minor trials dealt with weapon design and operational safety. In 1986, as a result of the findings of the Royal Commission on Nuclear Testing in Australia, the UK and Australian governments agreed to set up a Technical Assessment Group (TAG) with one American, two Australian and two British members to review the Maralinga-Emu situation. TAG was to advise on a series of clean-up options and their associated costs and examine land-use options ranging from unrestricted use by the traditional Aboriginal land owners to options involving various degrees of administrative and physical control. In its interim report, presented in May 1986, TAG observed that the existing data base was inadequate and suggested a series of field and laboratory studies that would partly correct this situation. Six of these studies were concerned with redefining the existing levels of contamination and establishing acceptable levels of contamination for a range of land-use options. This paper discusses the rationale, organisational support, scope and experimental protocol adopted for each of the six studies

  20. Reduce, reuse, recycle: Acceptance of CO_2-utilization for plastic products

    International Nuclear Information System (INIS)

    Heek, Julia van; Arning, Katrin; Ziefle, Martina

    2017-01-01

    Global warming is a central threat for today's society caused by greenhouse gas emissions, mostly carbon dioxide emissions. Carbon dioxide capture and utilization (CCU) is a promising approach to reduce emissions and the use of expensive and limited fossil resources. Applying CCU, carbon dioxide (CO_2) can be incorporated as raw material during the manufacture of plastic products. While most of the studies address technical feasibilities, hardly any systematic research on public perception and acceptance of those specific products exists so far. This study empirically investigates the acceptance of CCU plastic products (mattress as example). First, interviews with experts and lay people revealed critical acceptance factors (CO_2 proportion, saving of fossil resources, disposal conditions, perceived health complaints). Their relative importance was detailed in two consecutive conjoint studies. Study 1 revealed disposal conditions and saving of fossil resources as essential for product selection, while the products’ CO_2 proportion was less important. In study 2, potential health complaints were integrated as well as individual levels of domain knowledge and risk perception, which significantly affected acceptance of CCU products. Recommendations concerning communication strategies for policy and industry were derived. - Highlights: • Study provides insights into the acceptance of specific CCU products. • Disposal conditions and savings of fossil resource are main drivers of acceptance. • Concerns about potential health effects act as major barrier especially for laypeople. • Perceived knowledge and risk perception affect CCU product acceptance. • Communication strategy recommendations for policy and industry are derived.

  1. On risks and acceptability

    International Nuclear Information System (INIS)

    Watson, S.R.

    1981-01-01

    A very attractive notion is that it should be possible not only to determine how much risk is associated with any particular activity, but also to determine if that risk is acceptable. Stated boldly this seems an entirely unobjectionable and indeed a very acceptable notion. There is, however, underlying this idea, a mistaken view of risk which we might refer to as the ''phlogiston'' theory of risk. In this paper, presented at the SRP meeting on Ethical and Legal Aspects of Radiological Protection, the phlogiston theory of risk is described; secondly, it will be argued that it is too simple a theory to be realistic or useful; and thirdly, the management of risk will be placed in a wider decision framework. Acceptability, it will be argued is highly dependent on context, and it is not possible, therefore, to lay down generally applicable notions of acceptability. (author)

  2. Factory Acceptance Test Procedure Westinghouse 100 ton Hydraulic Trailer

    International Nuclear Information System (INIS)

    Aftanas, B.L.

    1994-01-01

    This Factory Acceptance Test Procedure (FAT) is for the Westinghouse 100 Ton Hydraulic Trailer. The trailer will be used for the removal of the 101-SY pump. This procedure includes: safety check and safety procedures; pre-operation check out; startup; leveling trailer; functional/proofload test; proofload testing; and rolling load test

  3. Awareness and acceptability of premarital screening of sickle cell ...

    African Journals Online (AJOL)

    Premarital screening for the diagnosis of Sickle Cell Disease is helpful in the prevention of the condition. It provides information about the health of the individual while assessing their health related reproductive risk. To evaluate the level of awareness and acceptability of premarital screening for sickle cell disease amongst ...

  4. Measuring social risk and determining its acceptability

    International Nuclear Information System (INIS)

    Lathrop, J.W.

    1978-01-01

    The implementation of a nuclear waste management technology raises several issues concerning the regulation of social risk. This paper presents a decision analytic approach to resolving some of those issues. A methodology for developing a radiological risk measure is presented, and several approaches to defining acceptable levels of that risk measure are considered. The methodology presented is oriented toward the development of radiological performance objectives for use as guidance in the drafting of regulations

  5. Last Glacial Maximum to Holocene climate evolution controlled by sea-level change, Leeuwin Current, and Australian Monsoon in the Northwestern Australia

    Science.gov (United States)

    Ishiwa, T.; Yokoyama, Y.; McHugh, C.; Reuning, L.; Gallagher, S. J.

    2017-12-01

    The transition from cold to warm conditions during the last deglaciation influenced climate variability in the Indian Ocean and Pacific as a result of submerge of continental shelf and variations in the Indonesian Throughflow and Australian Monsoon. The shallow continental shelf (Program Expedition 356 Indonesian Throughflow drilled in the northwestern Australian shallow continental shelf and recovered an interval from the Last Glacial Maximum to Holocene in Site U1461. Radiocarbon dating on macrofossils, foraminifera, and bulk organic matter provided a precise age-depth model, leading to high-resolved paleoclimate reconstruction. X-ray elemental analysis results are interpreted as an indicator of sedimentary environmental changes. The upper 20-m part of Site U1461 apparently records the climate transition from the LGM to Holocene in the northwestern Australia, which could be associated with sea-level change, Leeuwin Current activity, and the Australian Monsoon.

  6. Model for Calculating the Maximum Permissible Tax Burden in Amur Region in the Context of the Implementation of Largest Investment Projects

    Directory of Open Access Journals (Sweden)

    Viktor Vladimirovich Ivanov

    2018-03-01

    Full Text Available According to the Government of the Amur region, tax collection from the implementation of investment projects was tightly controlled from 2016, because of the region’s high debt load. This situation requires assessing the acceptability of the level of regional tax burden for business entities. The purpose of this paper is to develop a model for assessing the level of regional tax burden, taking into account the implementation of the largest investment projects in the territory. The main hypothesis of this paper consists, firstly, in the existence of tax burden, which is acceptable for regional economic entities. Secondly, this level of tax burden ensures the growth of fiscal revenues for the budget. We proposed to assess the level of tax burden on the basis of a three-factor linear heterogeneous production function, taking into account certain economic indicators of the largest investment project — “Construction of the Vostochny Сosmodrome”. The concept of the Laffer curve serves as a research methodology. According to our calculations, since 2011, the tax burden in the Amur region has a clear tendency to increase. At the same time, from 2007 to the present time, the tax burden exceeds its maximum permissible value and constrains economic growth in the region. If this trend continues, by 2018 tax revenues from the territory of the region will be on the verge of reduction. The obtained results show that the tax burden in the Amur region in 2017 is 16.81 %. To stimulate the activities of economic entities in the region, and as a consequence, to increase the GRP of the region, it is necessary to reduce the level of taxation by 4.77 percentage points (to 12.04 %, Thus, the current economic situation requires to change the course of regional taxation policy to a more liberal attitude towards taxpayers. Otherwise, soon the budget of the Amur region may fail to receive a part of revenues, as the region’s economic entities will not be able to

  7. How long do centenarians survive? Life expectancy and maximum lifespan.

    Science.gov (United States)

    Modig, K; Andersson, T; Vaupel, J; Rau, R; Ahlbom, A

    2017-08-01

    The purpose of this study was to explore the pattern of mortality above the age of 100 years. In particular, we aimed to examine whether Scandinavian data support the theory that mortality reaches a plateau at particularly old ages. Whether the maximum length of life increases with time was also investigated. The analyses were based on individual level data on all Swedish and Danish centenarians born from 1870 to 1901; in total 3006 men and 10 963 women were included. Birth cohort-specific probabilities of dying were calculated. Exact ages were used for calculations of maximum length of life. Whether maximum age changed over time was analysed taking into account increases in cohort size. The results confirm that there has not been any improvement in mortality amongst centenarians in the past 30 years and that the current rise in life expectancy is driven by reductions in mortality below the age of 100 years. The death risks seem to reach a plateau of around 50% at the age 103 years for men and 107 years for women. Despite the rising life expectancy, the maximum age does not appear to increase, in particular after accounting for the increasing number of individuals of advanced age. Mortality amongst centenarians is not changing despite improvements at younger ages. An extension of the maximum lifespan and a sizeable extension of life expectancy both require reductions in mortality above the age of 100 years. © 2017 The Association for the Publication of the Journal of Internal Medicine.

  8. Modelling information flow along the human connectome using maximum flow.

    Science.gov (United States)

    Lyoo, Youngwook; Kim, Jieun E; Yoon, Sujung

    2018-01-01

    The human connectome is a complex network that transmits information between interlinked brain regions. Using graph theory, previously well-known network measures of integration between brain regions have been constructed under the key assumption that information flows strictly along the shortest paths possible between two nodes. However, it is now apparent that information does flow through non-shortest paths in many real-world networks such as cellular networks, social networks, and the internet. In the current hypothesis, we present a novel framework using the maximum flow to quantify information flow along all possible paths within the brain, so as to implement an analogy to network traffic. We hypothesize that the connection strengths of brain networks represent a limit on the amount of information that can flow through the connections per unit of time. This allows us to compute the maximum amount of information flow between two brain regions along all possible paths. Using this novel framework of maximum flow, previous network topological measures are expanded to account for information flow through non-shortest paths. The most important advantage of the current approach using maximum flow is that it can integrate the weighted connectivity data in a way that better reflects the real information flow of the brain network. The current framework and its concept regarding maximum flow provides insight on how network structure shapes information flow in contrast to graph theory, and suggests future applications such as investigating structural and functional connectomes at a neuronal level. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Lake Basin Fetch and Maximum Length/Width

    Data.gov (United States)

    Minnesota Department of Natural Resources — Linear features representing the Fetch, Maximum Length and Maximum Width of a lake basin. Fetch, maximum length and average width are calcuated from the lake polygon...

  10. Biotechnology and food safety in China: Consumers' acceptance or resistance?

    NARCIS (Netherlands)

    Ho, P.; Vermeer, E.B.; Zhao, H.

    2006-01-01

    Although China is one of the world's largest producers and consumers of genetically modified (GM) crops and derived food products, little is known about the level of Chinese consumer awareness, understanding and acceptance of GM food. Initially, China pursued relatively aggressive policies for

  11. Biotechnology and food safety in China : Consumers' acceptance or resistance?

    NARCIS (Netherlands)

    Ho, P; Vermeer, EB; Zhao, JH

    Although China is one of the world's largest producers and consumers of genetically modified (GM) crops and derived food products, little is known about the level of Chinese consumer awareness, understanding and acceptance of GM food. Initially, China pursued relatively aggressive policies for

  12. Operations Acceptance Management

    OpenAIRE

    Suchá, Ivana

    2010-01-01

    This paper examines the process of Operations Acceptance Management, whose main task is to control Operations Acceptance Tests (OAT). In the first part the author focuses on the theoretical ground for the problem in the context of ITSM best practices framework ITIL. Benefits, process pitfalls and possibilities for automation are discussed in this part. The second part contains a case study of DHL IT Services (Prague), where a solution optimizing the overall workflow was implemented using simp...

  13. Maximum permissible voltage of YBCO coated conductors

    Energy Technology Data Exchange (ETDEWEB)

    Wen, J.; Lin, B.; Sheng, J.; Xu, J.; Jin, Z. [Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China); Hong, Z., E-mail: zhiyong.hong@sjtu.edu.cn [Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China); Wang, D.; Zhou, H.; Shen, X.; Shen, C. [Qingpu Power Supply Company, State Grid Shanghai Municipal Electric Power Company, Shanghai (China)

    2014-06-15

    Highlights: • We examine three kinds of tapes’ maximum permissible voltage. • We examine the relationship between quenching duration and maximum permissible voltage. • Continuous I{sub c} degradations under repetitive quenching where tapes reaching maximum permissible voltage. • The relationship between maximum permissible voltage and resistance, temperature. - Abstract: Superconducting fault current limiter (SFCL) could reduce short circuit currents in electrical power system. One of the most important thing in developing SFCL is to find out the maximum permissible voltage of each limiting element. The maximum permissible voltage is defined as the maximum voltage per unit length at which the YBCO coated conductors (CC) do not suffer from critical current (I{sub c}) degradation or burnout. In this research, the time of quenching process is changed and voltage is raised until the I{sub c} degradation or burnout happens. YBCO coated conductors test in the experiment are from American superconductor (AMSC) and Shanghai Jiao Tong University (SJTU). Along with the quenching duration increasing, the maximum permissible voltage of CC decreases. When quenching duration is 100 ms, the maximum permissible of SJTU CC, 12 mm AMSC CC and 4 mm AMSC CC are 0.72 V/cm, 0.52 V/cm and 1.2 V/cm respectively. Based on the results of samples, the whole length of CCs used in the design of a SFCL can be determined.

  14. Acceptance and Use of Eight Arsenic-Safe Drinking Water Options in Bangladesh

    Science.gov (United States)

    Inauen, Jennifer; Hossain, Mohammad Mojahidul; Johnston, Richard B.; Mosler, Hans-Joachim

    2013-01-01

    Arsenic contamination of drinking water is a serious public health threat. In Bangladesh, eight major safe water options provide an alternative to contaminated shallow tubewells: piped water supply, deep tubewells, pond sand filters, community arsenic-removal, household arsenic removal, dug wells, well-sharing, and rainwater harvesting. However, it is uncertain how well these options are accepted and used by the at-risk population. Based on the RANAS model (risk, attitudes, norms, ability, and self-regulation) this study aimed to identify the acceptance and use of available safe water options. Cross-sectional face-to-face interviews were used to survey 1,268 households in Bangladesh in November 2009 (n = 872), and December 2010 (n = 396). The questionnaire assessed water consumption, acceptance factors from the RANAS model, and socioeconomic factors. Although all respondents had access to at least one arsenic-safe drinking water option, only 62.1% of participants were currently using these alternatives. The most regularly used options were household arsenic removal filters (92.9%) and piped water supply (85.6%). However, the former result may be positively biased due to high refusal rates of household filter owners. The least used option was household rainwater harvesting (36.6%). Those who reported not using an arsenic-safe source differed in terms of numerous acceptance factors from those who reported using arsenic-safe sources: non-users were characterized by greater vulnerability; showed less preference for the taste and temperature of alternative sources; found collecting safe water quite time-consuming; had lower levels of social norms, self-efficacy, and coping planning; and demonstrated lower levels of commitment to collecting safe water. Acceptance was particularly high for piped water supplies and deep tubewells, whereas dug wells and well-sharing were the least accepted sources. Intervention strategies were derived from the results in order to

  15. Developing a Stoma Acceptance Questionnaire to improve motivation to adhere to enterostoma self-care.

    Science.gov (United States)

    Bagnasco, A; Watson, R; Zanini, M; Catania, G; Aleo, G; Sasso, L

    2017-06-01

    In stoma care, patient education is often weak in terms of improving patients' level of acceptance of living with a stoma. Self-care educational interventions in enterostomal patients, which according to Orem's Theory should take into account these patients' specific needs, require instruments that measure patients' stoma acceptance to improve motivation based on the resumption of activities they used to carry out before having a stoma. The aim of the study was to develop an instrument that measures the level of stoma acceptance to improve motivation to adhere to enterostoma self-care. Aspects that improve stoma acceptance and consequently motivation to adhere to enterostoma self-care were identified through 10 focus groups. In the focus groups, the motivation indicators were grouped, categorised and results entered into a Stoma Acceptance Questionnaire (SAQ). The SAQ was then piloted with 104 enterostomal patients from three general hospitals. To assess the construct validity of the SAQ, Mokken Scaling was used to explore the latent structure of the SAQ. Mokken scaling is a non-parametric method that falls under the umbrella of methods described as item response theories (IRT). The theme "Living with a stoma"; "Autonomy"; "Support"; "Ability to deal with stoma", plus a common underlying theme: "Stoma acceptance" were dissussed by the Focus Groups. The experts identified the items of the (SAQ) through these themes. Mokken Scaling identified the "resumption of enterostomal patients' normal activities" as a measure of stoma acceptance, thus confirming the construct validity of the SAQ. The tool proposed affords a pioneering example of how this gap can be bridged. Indeed, the SAQ could enable nurses adopting a standardized approach for the assessment of enterostomal patients' motivation to resume their normal activities and identify needs linked to this. The SAQ could also be used to measure the effectiveness of psychosocial and educational interventions aimed at

  16. Gerontechnology acceptance by elderly Hong Kong Chinese: a senior technology acceptance model (STAM).

    Science.gov (United States)

    Chen, Ke; Chan, Alan Hoi Shou

    2014-01-01

    The purpose of this study was to develop and test a senior technology acceptance model (STAM) aimed at understanding the acceptance of gerontechnology by older Hong Kong Chinese people. The proposed STAM extended previous technology acceptance models and theories by adding age-related health and ability characteristics of older people. The proposed STAM was empirically tested using a cross-sectional questionnaire survey with a sample of 1012 seniors aged 55 and over in Hong Kong. The result showed that STAM was strongly supported and could explain 68% of the variance in the use of gerontechnology. For older Hong Kong Chinese, individual attributes, which include age, gender, education, gerontechnology self-efficacy and anxiety, and health and ability characteristics, as well as facilitating conditions explicitly and directly affected technology acceptance. These were better predictors of gerontechnology usage behaviour (UB) than the conventionally used attitudinal factors (usefulness and ease of use).

  17. Quantitative Maximum Shear-Wave Stiffness of Breast Masses as a Predictor of Histopathologic Severity.

    Science.gov (United States)

    Berg, Wendie A; Mendelson, Ellen B; Cosgrove, David O; Doré, Caroline J; Gay, Joel; Henry, Jean-Pierre; Cohen-Bacrie, Claude

    2015-08-01

    The objective of our study was to compare quantitative maximum breast mass stiffness on shear-wave elastography (SWE) with histopathologic outcome. From September 2008 through September 2010, at 16 centers in the United States and Europe, 1647 women with a sonographically visible breast mass consented to undergo quantitative SWE in this prospective protocol; 1562 masses in 1562 women had an acceptable reference standard. The quantitative maximum stiffness (termed "Emax") on three acquisitions was recorded for each mass with the range set from 0 (very soft) to 180 kPa (very stiff). The median Emax and interquartile ranges (IQRs) were determined as a function of histopathologic diagnosis and were compared using the Mann-Whitney U test. We considered the impact of mass size on maximum stiffness by performing the same comparisons for masses 9 mm or smaller and those larger than 9 mm in diameter. The median patient age was 50 years (mean, 51.8 years; SD, 14.5 years; range, 21-94 years), and the median lesion diameter was 12 mm (mean, 14 mm; SD, 7.9 mm; range, 1-53 mm). The median Emax of the 1562 masses (32.1% malignant) was 71 kPa (mean, 90 kPa; SD, 65 kPa; IQR, 31-170 kPa). Of 502 malignancies, 23 (4.6%) ductal carcinoma in situ (DCIS) masses had a median Emax of 126 kPa (IQR, 71-180 kPa) and were less stiff than 468 invasive carcinomas (median Emax, 180 kPa [IQR, 138-180 kPa]; p = 0.002). Benign lesions were much softer than malignancies (median Emax, 43 kPa [IQR, 24-83 kPa] vs 180 kPa [IQR, 129-180 kPa]; p masses. Despite overlap in Emax values, maximum stiffness measured by SWE is a highly effective predictor of the histopathologic severity of sonographically depicted breast masses.

  18. The ATLAS High Level Trigger Steering Framework and the Trigger Configuration System.

    CERN Document Server

    Perez Cavalcanti, Tiago; The ATLAS collaboration

    2011-01-01

    The ATLAS detector system installed in the Large Hadron Collider (LHC) at CERN is designed to study proton-proton and nucleus-nucleus collisions with a maximum centre of mass energy of 14 TeV at a bunch collision rate of 40MHz. In March 2010 the four LHC experiments saw the first proton-proton collisions at 7 TeV. Still within the year a collision rate of nearly 10 MHz is expected. At ATLAS, events of potential interest for ATLAS physics are selected by a three-level trigger system, with a final recording rate of about 200 Hz. The first level (L1) is implemented in custom hardware; the two levels of the high level trigger (HLT) are software triggers, running on large farms of standard computers and network devices. Within the ATLAS physics program more than 500 trigger signatures are defined. The HLT tests each signature on each L1-accepted event; the test outcome is recorded for later analysis. The HLT-Steering is responsible for this. It foremost ensures the independent test of each signature, guarantying u...

  19. Relationship Between Teacher ICT Competency And Teacher Acceptance And Use Of School Management System (SMS

    Directory of Open Access Journals (Sweden)

    Leong Mei Wei

    2016-10-01

    Full Text Available This study aims at examining the relationship between teacher ICT competency and teacher acceptance and use of SMS in Negeri Sembilan secondary schools in Malaysia. This is a non-experimental quantitative research using survey technique through the administration of a set of questionnaire that comprised teacher demographic variables, teacher ICT competency and teacher acceptance and use of SMS. Some 417 returned questionnaires have been analyzed. The findings showed that teachers in Negeri Sembilan secondary schools rated themselves as having high level of ICT competency, and acceptance and use of SMS. Furthermore, data indicated that there was a statistically significant moderately strong positive correlation between teacher ICT competency and teacher acceptance and use of SMS. In addition, multiple regression analysis showed that smart pedagogy, professional growth and leadership, and digital citizenship were the three teacher ICT competency dimensions that are statistically significant predictors of teacher acceptance and use of SMS. The fitness indexes of the proposed structural model do not achieve the level of fitness required for RMSEA, GFI, and Ratio Chisq/df. Thus, a re-specified structural model was established for this study.

  20. Enraf series 854 Advanced Technology Gauge (ATG) acceptance test procedure. Revision 3

    International Nuclear Information System (INIS)

    Barnes, G.A.

    1995-01-01

    This procedure provides acceptance testing for Enraf Series 854 level gauges used to monitor levels in Hanford Waste Storage Tanks. The test will verify that the gauge functions according to the manufacturer's instructions and specifications and is properly setup prior to being delivered to the tank farm area

  1. Use of Consumer Acceptability as a Tool to Determine the Level of Sodium Reduction: A Case Study on Beef Soup Substituted With Potassium Chloride and Soy-Sauce Odor.

    Science.gov (United States)

    Lee, Cho Long; Lee, Soh Min; Kim, Kwang-Ok

    2015-11-01

    In this study, consumer acceptability was considered as a tool of reducing sodium rather than just using it as a final examination of the successfulness of the substitution. This study consisted of 4 experimental steps. First, by gradually reducing the concentrations of NaCl, consumer rejection threshold (CRT) of NaCl in beef soup was examined. Then, the amount of KCl that can increase preference was examined in 2 low sodium beef soups, with sodium concentrations slightly above or below the CRT. Relative saltiness of various KCl and NaCl/KCl mixtures were also measured. Finally, consumers evaluated acceptability and intensities of sensory characteristics for 9 beef soup samples that differed with respect to NaCl content and/or KCl content with/without addition of salty-congruent odor (soy-sauce odor). The results showed that in the "above CRT" system, consumer acceptability as well as sensory profile of low sodium beef soup substituted using KCl had similar profile to the control although saltiness was not fully recovered, whereas in the "below CRT" system, consumer acceptability was not recovered using KCl solely as a substitute. Potential of using salty-congruent odor as a final touch to induce salty taste was observed; however, the results inferred the importance of having almost no artificialness in the odor and having harmony with the final product when using it as a strategy to substitute sodium. Overall, the results of the study implied the importance of considering consumer acceptability when approaching sodium reduction to better understand the potentials of the sodium substitutes and salty-congruent odor. Strategies attempting to reduce sodium contents in food have mainly substituted sodium to the level that provides equivalent salty taste and then examined consumer liking. However, these approaches may result in failure for consumer appeal. This study attempted to consider consumer acceptability as a tool of reducing sodium in beef soup substituted using

  2. Receiver function estimated by maximum entropy deconvolution

    Institute of Scientific and Technical Information of China (English)

    吴庆举; 田小波; 张乃铃; 李卫平; 曾融生

    2003-01-01

    Maximum entropy deconvolution is presented to estimate receiver function, with the maximum entropy as the rule to determine auto-correlation and cross-correlation functions. The Toeplitz equation and Levinson algorithm are used to calculate the iterative formula of error-predicting filter, and receiver function is then estimated. During extrapolation, reflective coefficient is always less than 1, which keeps maximum entropy deconvolution stable. The maximum entropy of the data outside window increases the resolution of receiver function. Both synthetic and real seismograms show that maximum entropy deconvolution is an effective method to measure receiver function in time-domain.

  3. How trust and emotions influence policy acceptance: The case of the Irish water charges.

    Science.gov (United States)

    Rodriguez-Sanchez, Carla; Schuitema, Geertje; Claudy, Marius; Sancho-Esper, Franco

    2018-02-01

    The introduction of new policies can evoke strong emotional reactions by the public. Yet, social-psychological research has paid little attention to affective determinants of individual-level policy acceptance. Building on recent theoretical and empirical advances around emotions and decision-making, we evaluate how people's trust and integral emotions function as important antecedents of cognitive evaluations, and subsequent acceptance of policies. We test our hypotheses within a sample of Irish citizens (n = 505), who were subject to the introduction of water charges in 2015. In line with our hypotheses, results show that general trust in government shapes emotions regarding water charges, which in turn, directly and via expected costs and benefits, influence policy acceptance. Additionally, we find that negative emotions have a larger direct effect on policy acceptance than positive emotions. Specifically, 'anger' was the main negative emotion that influenced the acceptance of the water charge. We conclude by discussing directions for future research around emotions and policy acceptance. © 2018 The British Psychological Society.

  4. Psychosocial determinants of disease acceptance in selected mental disorders

    Directory of Open Access Journals (Sweden)

    Renata Bogusz

    2017-12-01

    The greatest problem in the researched group related to the social consequences of the psychical disorders. Those questioned were afraid of the negative reactions of others and of being a burden to their families. The level of acceptance was not correlated with independent variables (age, gender, education, place of residence, general well-being.

  5. Impact of temperature and humidity on acceptability of indoor air quality during immediate and longer whole-body exposures

    DEFF Research Database (Denmark)

    Fang, Lei; Clausen, Geo; Fanger, Povl Ole

    1997-01-01

    Acceptability of clean air and air polluted by building materials was studied in climate chambers with different levels of air temperature and humidity in the ranges 18-28°C and 30-70%. The immediate acceptability after entering a chamber and the acceptability during a 20-minute whole-body exposu...

  6. The effects of low level chlorination and chlorine dioxide on biofouling control in a once-through service water system

    International Nuclear Information System (INIS)

    Garrett, W.E. Jr.; Laylor, M.M.

    1995-01-01

    Continuous chlorination has been successfully used for the control of Corbicula at a nuclear power plant located on the Chattahoochee River in southeastern Alabama, since 1986. The purpose of this study was to investigate further minimization of chlorine usage and determine if chlorine dioxide is a feasible alternative. Four continuous biocide treatments were evaluated for macro and microfouling control effectiveness, operational feasibility, and environmental acceptability. One semi-continuous chlorination treatment was also evaluated for macrofouling control effectiveness. Higher treatment residuals were possible with chlorine dioxide than with chlorination due to the river discharge limitations. At the levels tested, continuous chlorine dioxide was significantly more effective in providing both macro and microfouling control. Semi-continuous chlorination was just as effective as continuous chlorination for controlling macrofouling. The Corbicula treatment programs that were tested should all provide sufficient control for zebra mussels. Chlorine dioxide was not as cost effective as chlorination for providing macrofouling control. The semi-continuous treatment save 50% on chemical usage and will allow for the simultaneous treatment of two service water systems. Chlorite levels produced during the chlorine dioxide treatments were found to be environmentally acceptable. Levels of trihalomethanes in the chlorinated service water were less than the maximum levels allowed in drinking water

  7. Acceptance of non-fuel assembly hardware by the Federal Waste Management System

    International Nuclear Information System (INIS)

    1990-03-01

    This report is one of a series of eight prepared by E. R. Johnson Associates, Inc. (JAI) under ORNL's contract with DOE's OCRWM Systems Integration Program and in support of the Annual Capacity Report (ACR) Issue Resolution Process. The report topics relate specifically to the list of high-priority technical waste acceptance issues developed jointly by DOE and a utility-working group. JAI performed various analyses and studies on each topic to serve as starting points for further discussion and analysis leading eventually to finalizing the process by which DOE will accept spent fuel and waste into its waste management system. The eight reports are concerned with the conditions under which spent fuel and high-level waste will be accepted in the following categories: failed fuel; consolidated fuel and associated structural parts; non-fuel-assembly hardware; fuel in metal storage casks; fuel in multi-element sealed canisters; inspection and testing requirements for wastes; canister criteria; spent fuel selection for delivery; and defense and commercial high-level waste packages. 14 refs., 12 figs., 43 tabs

  8. The Northern regional programme for the acceptance testing of X-ray equipment

    International Nuclear Information System (INIS)

    Faulkner, K.; Harrison, R.M.; Kotre, C.J.; Smith, S.; Davies, M.; Barker, P.

    1989-01-01

    Since 1984 the UK Northern Regional Medical Physics Department has participated in a regional acceptance testing programme for all X-ray equipment from mobile units to computed tomography scanners. Organizational and radiation physics aspects of the programme are described. Three levels of tests are performed by physicists: the first on installation, the second after 3 months, the final visit just prior to the end of the manufacturers warranty. The second test is only performed if any aspect of performance requires rechecking as a result of the first. Acceptance test protocols are based on those published by the Institute of Physical Sciences in Medicine. Details limiting values for the acceptance test measurements are given. In some instances testing has resulted in modifications to the design and construction of X-ray equipment. Acceptance testing is important in determining a baseline standard of performance against which routine quality assurance may be assessed. (author)

  9. Acceptance Sampling Plans Based on Truncated Life Tests for Sushila Distribution

    Directory of Open Access Journals (Sweden)

    Amer Ibrahim Al-Omari

    2018-03-01

    Full Text Available An acceptance sampling plan problem based on truncated life tests when the lifetime following a Sushila distribution is considered in this paper. For various acceptance numbers, confidence levels and values of the ratio between fixed experiment time and particular mean lifetime, the minimum sample sizes required to ascertain a specified mean life were found. The operating characteristic function values of the suggested sampling plans and the producer’s risk are presented. Some tables are provided and the results are illustrated by an example of a real data set.

  10. Prediction of the maximum dosage to man from the fallout of nuclear devices V. Estimation of the maximum dose from internal emitters in aquatic food supply

    International Nuclear Information System (INIS)

    Tamplin, A.R.; Fisher, H.L.; Chapman, W.H.

    1968-01-01

    A method is described for estimating the maximum internal dose that could result from the radionuclides released to an aquatic environment. By means of this analysis one can identify the nuclides that could contribute most to the internal dose, and determine the contribution of each nuclide to the total dose. The calculations required to estimate the maximum dose to an infant's bone subsequent to the construction of a sea-level canal are presented to illustrate the overall method. The results are shown to serve the basic aims of preshot rad-safe analysis and of guidance for postshot documentation. The usefulness of the analysis in providing guidance for device design is further pointed out. (author)

  11. MCO Engineering Test Report Fuel Basket Handling Grapple Acceptance Test

    International Nuclear Information System (INIS)

    CHENAULT, D.M.

    2000-01-01

    Acceptance testing of the production SNF Fuel Basket lift grapples to the required 150 percent maximum lift load is documented herein. The report shows the results affirming the proof test passage. The primary objective of this test was to confirm the load rating of the grapple per applicable requirements of ANSI 14 6 American National Standard For Radioactive Materials Special Lifting Devices for Shipping Containers Weighing 10,000 pounds (4500kg) or More. The above Standard requires a load test of 150% of the design load which must be held for a minimum of 10 minutes followed by a Liquid Penetrant or Magnetic Particle examination of critical areas and welds in accordance with the ANSI/ASME Boiler and Pressure Vessel Code 1989 Section 111 Division 1 section NF 5350

  12. When is genetic modification socially acceptable? When used to advance human health through avenues other than food.

    Science.gov (United States)

    Olynk Widmar, Nicole J; Dominick, S R; Tyner, Wallace E; Ruple, Audrey

    2017-01-01

    Given the potential for genetic modification (GM) to impact human health, via food and health mechanisms, a greater understanding of the social acceptance of GM is necessary to facilitate improved health outcomes. This analysis sought to quantify U.S. residents' acceptance of GM across five potential uses (grain production, fruit or vegetable production, livestock production, human medicine, and human health, i.e. disease vector control) and provides an in-depth analysis of a timely case study-the Zika virus (ZIKV). The two categories with the highest levels of acceptance for GM use were human medicine (62% acceptance) and human health (68% acceptance); the proportions agreeing with the use of GM for these two categories were statistically different from all other categories. Acceptance of GM in food uses revealed 44% of the sample accepted the use of GM in livestock production while grain production and fruit and vegetable production showed similar levels of agreement with 49% and 48% of responses, respectively. Two variables were significant in all five models predicting GM acceptance; namely, being male and GM awareness. Being male was significant and positive for all models; respondents who reported being male were more likely (than those who reported female) to agree with all five of the uses of GM studied. Those who were reportedly aware of GM mosquito technology were also more likely to agree with all uses of GM technology investigated. The potential relationship between awareness of GM technology uses and acceptance of other uses could help inform rates of acceptance of new technologies by various population segments.

  13. Acceptance, commissioning and quality control in radiosurgery

    International Nuclear Information System (INIS)

    Toreti, Dalila Luzia

    2009-01-01

    Stereotactic Radiosurgery is a treatment technique that uses narrow beams of radiation focused with great accuracy in a small lesion. The introduction of micro multi leaf collimators (mMLC) allows this technique to reach a higher degree of dose conformation of the target lesion allowing a smaller irradiation of critical structures and normal tissues. This paper presents the results of the acceptance tests and commissioning of a Varian 6EX linear accelerator dedicated to radiosurgery associated with the BrainLab micro multi leaf collimator installed in the Hospital das Clinicas da Faculdade de Medicina da USP (HC-FMUSP) and establish feasible quality assurance program for the services that employ this special technique. The results of the acceptance tests were satisfactory and are willing with the specifications provided by the manufacturer and the commissioning tests were within the international recommendations. The tests and measures that are part of quality control process should be specific to each treatment unit, and the need, frequency and levels of tolerance

  14. Development and Validation of the Persian Version of the Acceptable Noise Level (ANL Test in Normal Children Aged 5-8 Years

    Directory of Open Access Journals (Sweden)

    Abdollah Moossavi

    2016-06-01

    Full Text Available Background: The goal of the present study was to develop and validate the Persian version of the Acceptable Noise Level (ANL test in normal, Persianspeaking children aged 5-8 years. Methods: This tool-making and non-experimental research was conducted in two stages. In the first stage the proper story was selected and recorded after evaluation of its content validity. In the second stage this test material was administered to a total 181 normal children (97 girls and 84 boys randomly chosen from the population of preschool and primary school children of Tehran (District 5, aged 5-8 years in four age groups to evaluate the reliability of test in order to develop the Persian version of the ANL test and assess its changes during the growth. Lawshe’s method and Cronbach’s alpha coefficient were used to assess the content validity and reliability of the test, respectively. Mann– Whitney U test was used to examine gender differences, and Kruskal-Wallis test was to examine age differences. Results: Test-retest correlation of 0.74 indicated acceptable reliability of the test. Significant differences were found between most of different age groups for the ANL mean scores (P0.05. Conclusion: The study results indicated good validity and reliability of the Persian version of the ANL test in children. Therefore this test can be useful in designing classrooms suitable for 5-8 year-old children of both genders.

  15. Development of soy-based bread with acceptable sensory properties.

    Science.gov (United States)

    Ivanovski, B; Seetharaman, K; Duizer, L M

    2012-01-01

    Consumption of soy protein has been associated with benefits related to numerous areas of health. Due to the widespread consumption of bread, one means of contributing to the health of individuals is through the incorporation of soy protein into bread. To this end, soy flour (SF) or soy protein isolates (SPIs) in 20% and 12% substitution levels, respectively, were added to flour during bread manufacture. The developed breads were tested using a consumer panel for acceptability, using a refined white bread as a control. These data were compared to attribute intensity data collected by the trained panel to identify specific flavor and texture characteristics affecting liking. The sensory profile of the 20% SF bread was acceptable and comparable to the control bread, despite a significantly stronger beany flavor. No significant differences in sensory properties of the SF and control breads were detected by the trained panel for many sensory attributes. The SPI bread, however, had a sensory profile that was significantly more firm, dense, sour, beany, bitter, and astringent with a strong aftertaste in comparison to the wheat control bread. Consumer liking scores for the SPI bread was significantly lower than the liking of the control and the SF added bread. Many soy-enriched foods, while contributing positively to health, are considered unacceptable by consumers. This is due to negative sensory properties, such as beany, painty, and astringent notes, often perceived by consumers. This study provides information on the level of SF that can be included in bread in an amount that does not detract from consumer acceptability. This level also allows for a Food and Drug Administration (FDA) health claim to be made. © 2011 Institute of Food Technologists®

  16. Maximum Gene-Support Tree

    Directory of Open Access Journals (Sweden)

    Yunfeng Shan

    2008-01-01

    Full Text Available Genomes and genes diversify during evolution; however, it is unclear to what extent genes still retain the relationship among species. Model species for molecular phylogenetic studies include yeasts and viruses whose genomes were sequenced as well as plants that have the fossil-supported true phylogenetic trees available. In this study, we generated single gene trees of seven yeast species as well as single gene trees of nine baculovirus species using all the orthologous genes among the species compared. Homologous genes among seven known plants were used for validation of the finding. Four algorithms—maximum parsimony (MP, minimum evolution (ME, maximum likelihood (ML, and neighbor-joining (NJ—were used. Trees were reconstructed before and after weighting the DNA and protein sequence lengths among genes. Rarely a gene can always generate the “true tree” by all the four algorithms. However, the most frequent gene tree, termed “maximum gene-support tree” (MGS tree, or WMGS tree for the weighted one, in yeasts, baculoviruses, or plants was consistently found to be the “true tree” among the species. The results provide insights into the overall degree of divergence of orthologous genes of the genomes analyzed and suggest the following: 1 The true tree relationship among the species studied is still maintained by the largest group of orthologous genes; 2 There are usually more orthologous genes with higher similarities between genetically closer species than between genetically more distant ones; and 3 The maximum gene-support tree reflects the phylogenetic relationship among species in comparison.

  17. G+ COMMUNITY: MEASURING TEACHERS’ READINESS AND ACCEPTANCE

    Directory of Open Access Journals (Sweden)

    Mohd Faisal Farish Ishak

    2017-08-01

    Full Text Available The purpose of this paper is to explore teachers’ acceptance and readiness in using the cloud-based community as a platform for professional collaboration related to their teaching and learning. Familiarity with certain social networking platforms has made the preferable collaboration among teachers only limited to using Facebook, WhatsApp or Telegram. However, with time and space constraints in schools, some of the sharing sessions could not be done effectively most of the time. The study focuses on teachers’ acceptance and readiness of having their community in the cloud when they were introduced to the platform during a Continuous Professional Development (CPD course. A total number of 61 teachers used Google Community named as ‘Contemporary Children’s Literature (CCL 2016’ as a platform for their Professional Learning Community (PLC during the course. Descriptive analysis was done using Google Sheets and the findings show that these teachers are receptive towards Google Community in terms of its engagement level, usefulness as well as ease of use. The introduction to Google Community has created a new pathway for their collaboration especially for teaching and learning purposes. In a nutshell, their acceptance towards the cloud-based community indicates that, given the right training channel, teachers are positive and opened to utilising and integrating the cloud-based technology in their current teaching practice.

  18. The effects of asymmetric directional microphone fittings on acceptance of background noise.

    Science.gov (United States)

    Kim, Jong S; Bryan, Melinda Freyaldenhoven

    2011-05-01

    The effects of asymmetric directional microphone fittings (i.e., an omnidirectional microphone on one ear and a directional microphone on the other) on speech understanding in noise and acceptance of background noise were investigated in 15 full-time hearing aid users. Subjects were fitted binaurally with four directional microphone conditions (i.e., binaural omnidirectional, right asymmetric directional, left asymmetric directional and binaural directional microphones) using Siemens Intuis Directional behind-the-ear hearing aids. Speech understanding in noise was assessed using the Hearing in Noise Test, and acceptance of background noise was assessed using the Acceptable Noise Level procedure. Speech was presented from 0° while noise was presented from 180° azimuth. The results revealed that speech understanding in noise improved when using asymmetric directional microphones compared to binaural omnidirectional microphone fittings and was not significantly hindered compared to binaural directional microphone fittings. The results also revealed that listeners accepted more background noise when fitted with asymmetric directional microphones as compared to binaural omnidirectional microphones. Lastly, the results revealed that the acceptance of noise was further increased for the binaural directional microphones when compared to the asymmetric directional microphones, maximizing listeners' willingness to accept background noise in the presence of noise. Clinical implications will be discussed.

  19. 42 CFR 137.138 - Once the Indian Tribe's final offer has been accepted or deemed accepted by operation of law...

    Science.gov (United States)

    2010-10-01

    ... accepted or deemed accepted by operation of law, what is the next step? 137.138 Section 137.138 Public... final offer has been accepted or deemed accepted by operation of law, what is the next step? After the... the acceptance or the deemed acceptance. Rejection of Final Offers ...

  20. DYN1: a 66 MHz front end analog memory chip with first level trigger capture for use in future high luminosity particle physics experiments

    International Nuclear Information System (INIS)

    Anghinolfi, F.; Aspell, P.; Bonino, R.; Campbell, D.; Campbell, M.; Clark, A.G.; Heijne, E.H.M.; Jarron, P.; Santiard, J.C.; Verweij, H.

    1994-01-01

    DYN1 is a 32 channel, 128 cell analog memory with continuous write and read access. The chip amplifies the detector signals and integrates the signal currents onto capacitors within the memory during each bunch crossing interval. Dense dynamic logic circuitry accepts multiple first level triggers, freezes the corresponding analog data and stores their addresses in an external FIFO. The triggered data can then be read out at leisure whilst simultaneously sampling and storing new triggered events. A first level trigger latency of up to 2 μs is accepted at the maximum LHC clock frequency of 66 MHz. The chip shows an overall gain of 48.2 mV/25 000 e - . The mean channel noise is 4.5 mV and the pedestal variation from cell to cell within one channel is 1.9 mV. The total dynamic range has been measured at 4.6 V giving a resolution of 11 bits (0.05%) for the memory itself. (orig.)

  1. Tools for determining critical levels of atmospheric ammonia under the influence of multiple disturbances

    International Nuclear Information System (INIS)

    Pinho, P.; Llop, E.; Ribeiro, M.C.; Cruz, C.; Soares, A.; Pereira, M.J.; Branquinho, C.

    2014-01-01

    Critical levels (CLEs) of atmospheric ammonia based on biodiversity changes have been mostly calculated using small-scale single-source approaches, to avoid interference by other factors, which also influence biodiversity. Thus, it is questionable whether these CLEs are valid at larger spatial scales, in a multi- disturbances context. To test so, we sampled lichen diversity and ammonia at 80 sites across a region with a complex land-cover including industrial and urban areas. At a regional scale, confounding factors such as industrial pollutants prevailed, masking the CLEs. We propose and use a new tool to calculate CLEs by stratifying ammonia concentrations into classes, and focusing on the highest diversity values. Based on the significant correlations between ammonia and biodiversity, we found the CLE of ammonia for Mediterranean evergreen woodlands to be 0.69 μg m −3 , below the previously accepted value of 1.9 μg m −3 , and below the currently accepted pan-European CLE of 1.0 μg m −3 . - Highlights: • Biodiversity responds to multiple disturbances. • This prevents calculation regional critical levels of atmospheric ammonia. • We propose a tool to overcome that, based on the maximum biodiversity observed. • Critical level for Mediterranean evergreen woodlands was revised down to 0.69 μg m −3 . - Critical levels of atmospheric ammonia have not been calculated at a regional scale. Using a new method, we revised down the current Mediterranean evergreen woodlands critical level to 0.69 μg m −3

  2. Technology, Demographic Characteristics and E-Learning Acceptance: A Conceptual Model Based on Extended Technology Acceptance Model

    Science.gov (United States)

    Tarhini, Ali; Elyas, Tariq; Akour, Mohammad Ali; Al-Salti, Zahran

    2016-01-01

    The main aim of this paper is to develop an amalgamated conceptual model of technology acceptance that explains how individual, social, cultural and organizational factors affect the students' acceptance and usage behaviour of the Web-based learning systems. More specifically, the proposed model extends the Technology Acceptance Model (TAM) to…

  3. Investigating Students' Acceptance of a Statistics Learning Platform Using Technology Acceptance Model

    Science.gov (United States)

    Song, Yanjie; Kong, Siu-Cheung

    2017-01-01

    The study aims at investigating university students' acceptance of a statistics learning platform to support the learning of statistics in a blended learning context. Three kinds of digital resources, which are simulations, online videos, and online quizzes, were provided on the platform. Premised on the technology acceptance model, we adopted a…

  4. Design Criteria for Achieving Acceptable Indoor Radon Concentration

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    2016-01-01

    Design criteria for achieving an acceptable indoor radon concentration are presented in this paper. The paper suggests three design criteria. These criteria have to be considered at the early stage of the building design phase to meet the latest recommendations from the World Health Organization...... in most countries. The three design criteria are; first, establishing a radon barrier facing the ground; second, lowering the air pressure in the lower zone of the slab on ground facing downwards; third, diluting the indoor air with outdoor air. The first two criteria can prevent radon from infiltrating...... from the ground, and the third criteria can dilute the indoor air. By combining these three criteria, the indoor radon concentration can be lowered achieving an acceptable level. In addition, a cheap and reliable method for measuring the radon concentration in the indoor air is described. The provision...

  5. American acceptance of nuclear power

    International Nuclear Information System (INIS)

    Barrett, W.

    1980-01-01

    The characteristic adventurous spirit that built American technology will eventually lead to American acceptance of nuclear power unless an overpowering loss of nerve causes us to reject both nuclear technology and world leadership. The acceptance of new technology by society has always been accompanied by activist opposition to industralization. To resolve the debate between environmental and exploitive extremists, we must accept with humility the basic premise that human accomplishment is a finite part of nature

  6. Tacit acceptance of the succession

    Directory of Open Access Journals (Sweden)

    Ioana NICOLAE

    2012-01-01

    Full Text Available This paper examines some essential and contradictory aspects regarding the issue of tacit acceptance of succession in terms of distinction between documents valuing tacit acceptance of succession and other acts that would not justify such a solution. The documents expressly indicated by the legislator as having tacit acceptance value as well as those which do not have such value are presented and their most important legal effects are examined and discussed.

  7. Approaches to acceptable risk

    International Nuclear Information System (INIS)

    Whipple, C.

    1997-01-01

    Several alternative approaches to address the question open-quotes How safe is safe enough?close quotes are reviewed and an attempt is made to apply the reasoning behind these approaches to the issue of acceptability of radiation exposures received in space. The approaches to the issue of the acceptability of technological risk described here are primarily analytical, and are drawn from examples in the management of environmental health risks. These include risk-based approaches, in which specific quantitative risk targets determine the acceptability of an activity, and cost-benefit and decision analysis, which generally focus on the estimation and evaluation of risks, benefits and costs, in a framework that balances these factors against each other. These analytical methods tend by their quantitative nature to emphasize the magnitude of risks, costs and alternatives, and to downplay other factors, especially those that are not easily expressed in quantitative terms, that affect acceptance or rejection of risk. Such other factors include the issues of risk perceptions and how and by whom risk decisions are made

  8. ENRAF Series 854 Advanced Technology Gauge (ATG) Acceptance Test Procedure

    International Nuclear Information System (INIS)

    HUBER, J.H.

    1999-01-01

    This procedure provides acceptance testing for Enraf Series 854 level gauges used to monitor levels in Hanford Waste Storage Tanks. The test will verify that the gauge functions according to the manufacturer's instructions and specifications and is properly setup prior to being delivered to the tank farm area. This ATP does not set up the gauge for any specific tank, but is generalized to permit testing the gauge prior to installation package preparation

  9. Maximum neutron flux in thermal reactors

    International Nuclear Information System (INIS)

    Strugar, P.V.

    1968-12-01

    Direct approach to the problem is to calculate spatial distribution of fuel concentration if the reactor core directly using the condition of maximum neutron flux and comply with thermal limitations. This paper proved that the problem can be solved by applying the variational calculus, i.e. by using the maximum principle of Pontryagin. Mathematical model of reactor core is based on the two-group neutron diffusion theory with some simplifications which make it appropriate from maximum principle point of view. Here applied theory of maximum principle are suitable for application. The solution of optimum distribution of fuel concentration in the reactor core is obtained in explicit analytical form. The reactor critical dimensions are roots of a system of nonlinear equations and verification of optimum conditions can be done only for specific examples

  10. Maximum power tracking in WECS (Wind energy conversion systems) via numerical and stochastic approaches

    International Nuclear Information System (INIS)

    Elnaggar, M.; Abdel Fattah, H.A.; Elshafei, A.L.

    2014-01-01

    This paper presents a complete design of a two-level control system to capture maximum power in wind energy conversion systems. The upper level of the proposed control system adopts a modified line search optimization algorithm to determine a setpoint for the wind turbine speed. The calculated speed setpoint corresponds to the maximum power point at given operating conditions. The speed setpoint is fed to a generalized predictive controller at the lower level of the control system. A different formulation, that treats the aerodynamic torque as a disturbance, is postulated to derive the control law. The objective is to accurately track the setpoint while keeping the control action free from unacceptably fast or frequent variations. Simulation results based on a realistic model of a 1.5 MW wind turbine confirm the superiority of the proposed control scheme to the conventional ones. - Highlights: • The structure of a MPPT (maximum power point tracking) scheme is presented. • The scheme is divided into the optimization algorithm and the tracking controller. • The optimization algorithm is based on an online line search numerical algorithm. • The tracking controller is treating the aerodynamics torque as a loop disturbance. • The control technique is simulated with stochastic wind speed by Simulink and FAST

  11. Verification of average daily maximum permissible concentration of styrene in the atmospheric air of settlements under the results of epidemiological studies of the children’s population

    Directory of Open Access Journals (Sweden)

    М.А. Zemlyanova

    2015-03-01

    Full Text Available We presented the materials on the verification of the average daily maximum permissible concentration of styrene in the atmospheric air of settlements performed under the results of own in-depth epidemiological studies of children’s population according to the principles of the international risk assessment practice. It was established that children in the age of 4–7 years when exposed to styrene at the level above 1.2 of threshold level value for continuous exposure develop the negative exposure effects in the form of disorders of hormonal regulation, pigmentary exchange, antioxidative activity, cytolysis, immune reactivity and cytogenetic disbalance which contribute to the increased morbidity of diseases of the central nervous system, endocrine system, respiratory organs, digestion and skin. Based on the proved cause-and-effect relationships between the biomarkers of negative effects and styrene concentration in blood it was demonstrated that the benchmark styrene concentration in blood is 0.002 mg/dm3. The justified value complies with and confirms the average daily styrene concentration in the air of settlements at the level of 0.002 mg/m3 accepted in Russia which provides the safety for the health of population (1 threshold level value for continuous exposure.

  12. Integrated Advanced Microwave Sounding Unit-A (AMSU-A). Engineering Test Report: AMSU-A2 METSAT Instrument (S/N 108) Acceptance Level Vibration Tests of Dec 1999/Jan 2000 (S/O 784077, OC-454)

    Science.gov (United States)

    Heffner, R.

    2000-01-01

    This is the Engineering Test Report, AMSU-A2 METSAT Instrument (S/N 108) Acceptance Level Vibration Test of Dec 1999/Jan 2000 (S/O 784077, OC-454), for the Integrated Advanced Microwave Sounding Unit-A (AMSU-A).

  13. Managing Menstruation: Moderating Role of Symptom Severity on Active Coping and Acceptance.

    Science.gov (United States)

    Kennett, Deborah J; O'Hagan, Fergal T; Meyerhoff, Tanya J

    2016-05-01

    Although research has examined women's thoughts toward menstruation, the role passive and active coping strategies play in the acceptance of menses and getting-on with daily activities remains relatively unexplored. In total, 217 undergraduate females having normal regular monthly menstrual periods completed inventories assessing severity of menstrual symptoms, cognitive and emotional representation of health state, general and specific coping strategies, and acceptance. It was found that women having a more emotionally focused representation of menstruation (passive coping style) had a heightened belief that menstruation is debilitating and bothersome and, regardless of symptom severity, scored lower in acceptance of menstruation. Conversely, women using more active strategies to cope with menstrual symptoms were observed to be more generally resourceful and to conjunctively use more palliative coping strategies. More importantly, for women experiencing high levels of menstrual discomfort, use of active coping was associated with better acceptance and getting-on with everyday activities. © The Author(s) 2015.

  14. The Northern Regional Programme for the acceptance testing of X-ray equipment

    International Nuclear Information System (INIS)

    Faulkner, K.; Harrison, R.M.; Kotre, C.J.; Smith, S.; Davies, M.; Barker, P.

    1989-01-01

    Since 1984 the Regional Medical Physics Department has participated in a regional acceptance testing programme for all X-ray equipment from mobile units to computed tomography scanners. The organizational and radiation physics aspects of the programme are described. Three levels of tests are performed by physicists: the first on installation, the second after 3 months, and the final visit just prior to the end of the manufacturer's warranty. The second test is only performed if any aspect of performance requires rechecking as a result of the first visit. Acceptance test protocols are based on those published by the Institute of Physical Sciences in Medicine. Details of the limiting values for the acceptance test measurements are given. The results of the programme are discussed. In some instances the testing has resulted in modifications to the design and construction of X-ray equipment. Acceptance testing is important in determining a baseline standard of performance against which routine quality assurance may be assessed. (author)

  15. Differentiated influences of risk perceptions on nuclear power acceptance according to acceptance targets: Evidence from Korea

    International Nuclear Information System (INIS)

    Roh, Seung Kook; Lee, Jin Won

    2017-01-01

    The determinants of the public's nuclear power acceptance have received considerable attention as decisive factors regarding nuclear power policy. However, the contingency of the relative importance of different determinants has been less explored. Building on the literature of psychological distance between the individual and the object, the present study demonstrates that the relative effects of different types of perceived risks regarding nuclear power generation differ across acceptance targets. Using a sample of Korea, our results show that, regarding national acceptance of nuclear power generation, perceived risk from nuclear power plants exerts a stronger negative effect than that from radioactive waste management; however, the latter exerts a stronger negative effect than the former on local acceptance of a nuclear power plant. This finding provides implications for efficient public communication strategy to raise nuclear power acceptance

  16. CTOD-based acceptance criteria for heat exchanger head staybolts

    International Nuclear Information System (INIS)

    Lam, P.S.; Sindelar, R.L.; Barnes, D.M.; Awadalla, N.G.

    1992-01-01

    The primary coolant piping system of the Savannah River Site (SRS) reactors contains twelve heat exchangers to remove the waste heat from the nuclear materials production. A large break at the inlet or outlet heads of the heat exchangers would occur if the restraint members of the heads become inactive. The heat exchanger head is attached to the tubesheet by 84 staybolts. The structural integrity of the heads is demonstrated by showing the redundant capacity of the staybolts to restrain the head at design conditions and under seismic loadings. The beat exchanger head is analyzed with a three- dimensional finite element model. The restraint provided by the staybolts is evaluated for several postulated cases of inactive or missing staybolts, that is, bolts that have a flaw exceeding the ultrasonic testing (UT) threshold depth of 25% of the bolt diameter. A limit of 6 inactive staybolts is reached with a fracture criterion based on the maximum allowable local displacement at the active staybolts which corresponds to the crack tip opening displacement (CTOD) of 0.032 inches. An acceptance criteria methodology has been developed to disposition flaws reported in the staybolt inspections while ensuring adequate restraint capacity of the staybolts to maintain integrity of the heat exchanger heads against collapse. The methodology includes an approach for the baseline and periodic inspections of the staybolts. A total of up to 6 staybolts, reported as containing flaws with depths at or exceeding 25% would be acceptable in the heat exchanger

  17. Older Adults' Acceptance of Information Technology

    Science.gov (United States)

    Wang, Lin; Rau, Pei-Luen Patrick; Salvendy, Gavriel

    2011-01-01

    This study investigated variables contributing to older adults' information technology acceptance through a survey, which was used to find factors explaining and predicting older adults' information technology acceptance behaviors. Four factors, including needs satisfaction, perceived usability, support availability, and public acceptance, were…

  18. 75 FR 43840 - Inflation Adjustment of the Ordinary Maximum and Aggravated Maximum Civil Monetary Penalties for...

    Science.gov (United States)

    2010-07-27

    ...-17530; Notice No. 2] RIN 2130-ZA03 Inflation Adjustment of the Ordinary Maximum and Aggravated Maximum... remains at $250. These adjustments are required by the Federal Civil Penalties Inflation Adjustment Act [email protected] . SUPPLEMENTARY INFORMATION: The Federal Civil Penalties Inflation Adjustment Act of 1990...

  19. Acceptance of feed streams for treatment at the LERF/ETF complex

    International Nuclear Information System (INIS)

    McDonald, F.N.

    1994-10-01

    This document establishes a waste acceptance process for the storage and treatment of low-level liquid wastes in the LERF and ETF. It also discusses the steps that will be followed when evaluating a waste for storage and treatment

  20. Half-width at half-maximum, full-width at half-maximum analysis

    Indian Academy of Sciences (India)

    addition to the well-defined parameter full-width at half-maximum (FWHM). The distribution of ... optical side-lobes in the diffraction pattern resulting in steep central maxima [6], reduc- tion of effects of ... and broad central peak. The idea of.

  1. [Knowledge of human papilloma virus (HPV) and acceptance of vaginal self-sampling among Mexican woman].

    Science.gov (United States)

    Hernández-Márquez, Clara I; Salinas-Urbina, Addis A; Cruz-Valdez, Aurelio; Hernández-Girón, Carlos

    2014-01-01

    To analyze the relationship between the level of knowledge about human papilloma virus and the acceptance of vaginal self-sampling as a cervical cancer diagnostic test among Mexican women who have already experienced vaginal self-sampling at home. A structured questionnaire consisting of 22 questions was applied to 690 women in the state of Morelos who had taken a vaginal self-sample at home. The aspects explored were the level of knowledge about transmission of the human papilloma virus, identification of the virus as a necessary cause of cervical cancer, and clinical manifestations of infection and treatment. A knowledge index was constructed, identifying the relationship between the index and the women's acceptance of self-sampling, and their degree of trust in the procedure. The statistical analysis included a logistic regression with estimates of measures of association and their respective 95% confidence intervals. The level of knowledge about human papillomavirus showed a positive association with the degree of acceptance of vaginal self-sampling (OR 2.9; 95% CI 1.0-5.01) and the women's level of confidence (OR 2.9; 95% CI 1.8-4.67). The level of knowledge increased with level of education and was higher in younger women. In order for women with an increased risk of cervical cancer to continue participating in vaginal self-sampling, they must be well informed about the virus. This is especially true for older women, those with lower levels of education, and those in lower socioeconomic levels.

  2. Acceptance of failed SNF [spent nuclear fuel] assemblies by the Federal Waste Management System

    International Nuclear Information System (INIS)

    1990-03-01

    This report is one of a series of eight prepared by E. R. Johnson Associates, Inc. (JAI) under ORNL's contract with DOE's OCRWM Systems Integration Program and in support of the Annual Capacity Report (ACR) Issue Resolution Process. The report topics relate specifically to the list of high priority technical waste acceptance issues developed jointly by DOE and a utility-working group. JAI performed various analyses and studies on each topic to serve as starting points for further discussion and analysis leading eventually to finalizing the process by which DOE will accept spent fuel and waste into its waste management system. The eight reports are concerned with the conditions under which spent fuel and high level waste will be accepted in the following categories: failed fuel; consolidated fuel and associated structural parts; non-fuel-assembly hardware; fuel in metal storage casks; fuel in multi-element sealed canisters; inspection and testing requirements for wastes; canister criteria; spent fuel selection for delivery; and defense and commercial high-level waste packages. This document discusses acceptance of failed spent fuel assemblies by the Federal Waste Management System. 18 refs., 7 figs., 25 tabs

  3. Monitoring device acceptance in implantable cardioverter defibrillator patients using the Florida Patient Acceptance Survey

    DEFF Research Database (Denmark)

    Versteeg, Henneke; Starrenburg, Annemieke; Denollet, Johan

    2012-01-01

    Patient device acceptance might be essential in identifying patients at risk for adverse patient-reported outcomes following implantation of an implantable cardioverter defibrillator (ICD). We examined the validity and reliability of the Florida Patient Acceptance Scale (FPAS) and identified corr...

  4. Maximum entropy technique in the doublet structure analysis

    International Nuclear Information System (INIS)

    Belashev, B.Z.; Panebrattsev, Yu.A.; Shakhaliev, Eh.I.; Soroko, L.M.

    1998-01-01

    The Maximum Entropy Technique (MENT) for solution of the inverse problems is explained. The effective computer program for resolution of the nonlinear equations system encountered in the MENT has been developed and tested. The possibilities of the MENT have been demonstrated on the example of the MENT in the doublet structure analysis of noisy experimental data. The comparison of the MENT results with results of the Fourier algorithm technique without regularization is presented. The tolerant noise level is equal to 30% for MENT and only 0.1% for the Fourier algorithm

  5. Wind power: basic challenge concerning social acceptance

    NARCIS (Netherlands)

    Wolsink, M.; Meyers, R.A.

    2012-01-01

    This reference article gives an overview of social acceptance (acceptance by all relevant actors in society) of all relevant aspects of implementation and diffusion of wind power. In social acceptance three dimensions of acceptance are distinguished (socio-political -; community -; market

  6. Hydraulic Limits on Maximum Plant Transpiration

    Science.gov (United States)

    Manzoni, S.; Vico, G.; Katul, G. G.; Palmroth, S.; Jackson, R. B.; Porporato, A. M.

    2011-12-01

    Photosynthesis occurs at the expense of water losses through transpiration. As a consequence of this basic carbon-water interaction at the leaf level, plant growth and ecosystem carbon exchanges are tightly coupled to transpiration. In this contribution, the hydraulic constraints that limit transpiration rates under well-watered conditions are examined across plant functional types and climates. The potential water flow through plants is proportional to both xylem hydraulic conductivity (which depends on plant carbon economy) and the difference in water potential between the soil and the atmosphere (the driving force that pulls water from the soil). Differently from previous works, we study how this potential flux changes with the amplitude of the driving force (i.e., we focus on xylem properties and not on stomatal regulation). Xylem hydraulic conductivity decreases as the driving force increases due to cavitation of the tissues. As a result of this negative feedback, more negative leaf (and xylem) water potentials would provide a stronger driving force for water transport, while at the same time limiting xylem hydraulic conductivity due to cavitation. Here, the leaf water potential value that allows an optimum balance between driving force and xylem conductivity is quantified, thus defining the maximum transpiration rate that can be sustained by the soil-to-leaf hydraulic system. To apply the proposed framework at the global scale, a novel database of xylem conductivity and cavitation vulnerability across plant types and biomes is developed. Conductivity and water potential at 50% cavitation are shown to be complementary (in particular between angiosperms and conifers), suggesting a tradeoff between transport efficiency and hydraulic safety. Plants from warmer and drier biomes tend to achieve larger maximum transpiration than plants growing in environments with lower atmospheric water demand. The predicted maximum transpiration and the corresponding leaf water

  7. Some statistical and sampling needs for detecting spills or migration at commercial low-level radioactive waste disposal sites

    International Nuclear Information System (INIS)

    Thomas, J.M.; Eberhardt, L.L.; Skalski, J.R.; Simmons, M.A.

    1984-05-01

    As part of a larger study funded by the US Nuclear Regulatory Commission we have been investigating field sampling strategies and compositing as a means of detecting spills or migration at commercial low-level radioactive waste disposal sites. The overall project is designed to produce information for developing guidance on implementing 10 CFR part 61. Compositing (pooling samples) for detection is discussed first, followed by our development of a statistical test to allow a decision as to whether any component of a composite exceeds a prescribed maximum acceptable level. The question of optimal field sampling designs and an Apple computer program designed to show the difficulties in constructing efficient field designs and using compositing schemes are considered. 6 references, 3 figures, 3 tables

  8. Two-dimensional maximum entropy image restoration

    International Nuclear Information System (INIS)

    Brolley, J.E.; Lazarus, R.B.; Suydam, B.R.; Trussell, H.J.

    1977-07-01

    An optical check problem was constructed to test P LOG P maximum entropy restoration of an extremely distorted image. Useful recovery of the original image was obtained. Comparison with maximum a posteriori restoration is made. 7 figures

  9. Online Support Service Quality, Online Learning Acceptance, and Student Satisfaction

    Science.gov (United States)

    Lee, Jung-Wan

    2010-01-01

    This paper examines potential differences between Korean and American students in terms of their perception levels regarding online education support service quality, online learning acceptance, and satisfaction. Eight hundred and seventy-two samples, which were collected from students in online classes in the United States and Korea, were…

  10. Maximum power point tracking

    International Nuclear Information System (INIS)

    Enslin, J.H.R.

    1990-01-01

    A well engineered renewable remote energy system, utilizing the principal of Maximum Power Point Tracking can be m ore cost effective, has a higher reliability and can improve the quality of life in remote areas. This paper reports that a high-efficient power electronic converter, for converting the output voltage of a solar panel, or wind generator, to the required DC battery bus voltage has been realized. The converter is controlled to track the maximum power point of the input source under varying input and output parameters. Maximum power point tracking for relative small systems is achieved by maximization of the output current in a battery charging regulator, using an optimized hill-climbing, inexpensive microprocessor based algorithm. Through practical field measurements it is shown that a minimum input source saving of 15% on 3-5 kWh/day systems can easily be achieved. A total cost saving of at least 10-15% on the capital cost of these systems are achievable for relative small rating Remote Area Power Supply systems. The advantages at larger temperature variations and larger power rated systems are much higher. Other advantages include optimal sizing and system monitor and control

  11. 7 CFR 3565.210 - Maximum interest rate.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Maximum interest rate. 3565.210 Section 3565.210... AGRICULTURE GUARANTEED RURAL RENTAL HOUSING PROGRAM Loan Requirements § 3565.210 Maximum interest rate. The interest rate for a guaranteed loan must not exceed the maximum allowable rate specified by the Agency in...

  12. Improved Reliability of Single-Phase PV Inverters by Limiting the Maximum Feed-in Power

    DEFF Research Database (Denmark)

    Yang, Yongheng; Wang, Huai; Blaabjerg, Frede

    2014-01-01

    Grid operation experiences have revealed the necessity to limit the maximum feed-in power from PV inverter systems under a high penetration scenario in order to avoid voltage and frequency instability issues. A Constant Power Generation (CPG) control method has been proposed at the inverter level...... devices, allowing a quantitative prediction of the power device lifetime. A study case on a 3 kW single-phase PV inverter has demonstrated the advantages of the CPG control in terms of improved reliability.......Grid operation experiences have revealed the necessity to limit the maximum feed-in power from PV inverter systems under a high penetration scenario in order to avoid voltage and frequency instability issues. A Constant Power Generation (CPG) control method has been proposed at the inverter level....... The CPG control strategy is activated only when the DC input power from PV panels exceeds a specific power limit. It enables to limit the maximum feed-in power to the electric grids and also to improve the utilization of PV inverters. As a further study, this paper investigates the reliability performance...

  13. Predetermining acceptable noise limits of EXAFS spectra in the limit of stochastic noise

    International Nuclear Information System (INIS)

    Hu, Yung-Jin; Booth, Corwin H

    2009-01-01

    The effect of stochastic noise on Extended X-ray Absorption Fine Structure (EXAFS) data measurement, analysis, and fitting is discussed. Stochastic noise reduces the ability to uniquely fit a calculated model to measured EXAFS data. Such noise can be reduced by common methods that increase the signal-to-noise ratio; however, these methods are not always practical. Therefore, predetermined, quantitative knowledge of the level of acceptable stochastic noise when fitting for a particular model system is essential in maximizing the chances of a successful EXAFS experiment and minimizing wasted beamtime. This paper outlines a method to estimate, through simulation, the acceptable level of stochastic noise in EXAFS spectra that still allows a successful test of a proposed model compound.

  14. Differentiated influences of risk perceptions on nuclear power acceptance according to acceptance targets: Evidence from Korea

    Directory of Open Access Journals (Sweden)

    Seungkook Roh

    2017-08-01

    Full Text Available The determinants of the public's nuclear power acceptance have received considerable attention as decisive factors regarding nuclear power policy. However, the contingency of the relative importance of different determinants has been less explored. Building on the literature of psychological distance between the individual and the object, the present study demonstrates that the relative effects of different types of perceived risks regarding nuclear power generation differ across acceptance targets. Using a sample of Korea, our results show that, regarding national acceptance of nuclear power generation, perceived risk from nuclear power plants exerts a stronger negative effect than that from radioactive waste management; however, the latter exerts a stronger negative effect than the former on local acceptance of a nuclear power plant. This finding provides implications for efficient public communication strategy to raise nuclear power acceptance.

  15. Differentiated influences of risk perceptions on nuclear power acceptance according to acceptance targets: Evidence from Korea

    Energy Technology Data Exchange (ETDEWEB)

    Roh, Seung Kook [Policy Research Center, Korea Atomic Energy Research Institute (KAERI), Daejeon (Korea, Republic of); Lee, Jin Won [School of Management, Xiamen University, Xiamen (China)

    2017-08-15

    The determinants of the public's nuclear power acceptance have received considerable attention as decisive factors regarding nuclear power policy. However, the contingency of the relative importance of different determinants has been less explored. Building on the literature of psychological distance between the individual and the object, the present study demonstrates that the relative effects of different types of perceived risks regarding nuclear power generation differ across acceptance targets. Using a sample of Korea, our results show that, regarding national acceptance of nuclear power generation, perceived risk from nuclear power plants exerts a stronger negative effect than that from radioactive waste management; however, the latter exerts a stronger negative effect than the former on local acceptance of a nuclear power plant. This finding provides implications for efficient public communication strategy to raise nuclear power acceptance.

  16. Comparisons of maximum deformation and failure forces at the implant–abutment interface of titanium implants between titanium-alloy and zirconia abutments with two levels of marginal bone loss

    Science.gov (United States)

    2013-01-01

    Background Zirconia materials are known for their optimal aesthetics, but they are brittle, and concerns remain about whether their mechanical properties are sufficient for withstanding the forces exerted in the oral cavity. Therefore, this study compared the maximum deformation and failure forces of titanium implants between titanium-alloy and zirconia abutments under oblique compressive forces in the presence of two levels of marginal bone loss. Methods Twenty implants were divided into Groups A and B, with simulated bone losses of 3.0 and 1.5 mm, respectively. Groups A and B were also each divided into two subgroups with five implants each: (1) titanium implants connected to titanium-alloy abutments and (2) titanium implants connected to zirconia abutments. The maximum deformation and failure forces of each sample was determined using a universal testing machine. The data were analyzed using the nonparametric Mann–Whitney test. Results The mean maximum deformation and failure forces obtained the subgroups were as follows: A1 (simulated bone loss of 3.0 mm, titanium-alloy abutment) = 540.6 N and 656.9 N, respectively; A2 (simulated bone loss of 3.0 mm, zirconia abutment) = 531.8 N and 852.7 N; B1 (simulated bone loss of 1.5 mm, titanium-alloy abutment) = 1070.9 N and 1260.2 N; and B2 (simulated bone loss of 1.5 mm, zirconia abutment) = 907.3 N and 1182.8 N. The maximum deformation force differed significantly between Groups B1 and B2 but not between Groups A1 and A2. The failure force did not differ between Groups A1 and A2 or between Groups B1 and B2. The maximum deformation and failure forces differed significantly between Groups A1 and B1 and between Groups A2 and B2. Conclusions Based on this experimental study, the maximum deformation and failure forces are lower for implants with a marginal bone loss of 3.0 mm than of 1.5 mm. Zirconia abutments can withstand physiological occlusal forces applied in the anterior region. PMID

  17. Last Glacial Maximum CO2 and d13C successfully reconciled

    NARCIS (Netherlands)

    Bouttes, N.; Paillard, D.; Roche, D.M.V.A.P.; Brovkin, V.; Bopp, L.

    2011-01-01

    During the Last Glacial Maximum (LGM, ∼21,000 years ago) the cold climate was strongly tied to low atmospheric CO2 concentration (∼190 ppm). Although it is generally assumed that this low CO2 was due to an expansion of the oceanic carbon reservoir, simulating the glacial level

  18. Maximum power point tracking for photovoltaic solar pump based on ANFIS tuning system

    Directory of Open Access Journals (Sweden)

    S. Shabaan

    2018-05-01

    Full Text Available Solar photovoltaic (PV systems are a clean and naturally replenished energy source. PV panels have a unique point which represents the maximum available power and this point depend on the environmental conditions such as temperature and irradiance. A maximum power point tracking (MPPT is therefore necessary for maximum efficiency. In this paper, a study of MPPT for PV water pumping system based on adaptive neuro-fuzzy inference system (ANFIS is discussed. A comparison between the performance of the system with and without MPPT is carried out under varying irradiation and temperature conditions. ANFIS based controller shows fast response with high efficiency at all irradiance and temperature levels making it a powerful technique for non-linear systems as PV modules. Keywords: MPPT, ANFIS, Boost converter, PMDC pump

  19. Impact of natural gas extraction on PAH levels in ambient air.

    Science.gov (United States)

    Paulik, L Blair; Donald, Carey E; Smith, Brian W; Tidwell, Lane G; Hobbie, Kevin A; Kincl, Laurel; Haynes, Erin N; Anderson, Kim A

    2015-04-21

    Natural gas extraction, often referred to as "fracking," has increased rapidly in the U.S. in recent years. To address potential health impacts, passive air samplers were deployed in a rural community heavily affected by the natural gas boom. Samplers were analyzed for 62 polycyclic aromatic hydrocarbons (PAHs). Results were grouped based on distance from each sampler to the nearest active well. PAH levels were highest when samplers were closest to active wells. Additionally, PAH levels closest to natural gas activity were an order of magnitude higher than levels previously reported in rural areas. Sourcing ratios indicate that PAHs were predominantly petrogenic, suggesting that elevated PAH levels were influenced by direct releases from the earth. Quantitative human health risk assessment estimated the excess lifetime cancer risks associated with exposure to the measured PAHs. Closest to active wells, the risk estimated for maximum residential exposure was 2.9 in 10 000, which is above the U.S. EPA's acceptable risk level. Overall, risk estimates decreased 30% when comparing results from samplers closest to active wells to those farthest. This work suggests that natural gas extraction may be contributing significantly to PAHs in air, at levels that are relevant to human health.

  20. Impact of natural gas extraction on Pah levels in ambient air

    Science.gov (United States)

    Paulik, L. Blair; Donald, Carey E.; Smith, Brian W.; Tidwell, Lane G.; Hobbie, Kevin A.; Kincl, Laurel; Haynes, Erin N.; Anderson, Kim A.

    2015-01-01

    Natural gas extraction, often referred to as “fracking,” has increased rapidly in the U.S. in recent years. To address potential health impacts, passive air samplers were deployed in a rural community heavily affected by the natural gas boom. Samplers were analyzed for 62 polycyclic aromatic hydrocarbons (PAHs). Results were grouped based on distance from each sampler to the nearest active well. PAH levels were highest when samplers were closest to active wells. Additionally, PAH levels closest to natural gas activity were an order of magnitude higher than levels previously reported in rural areas. Sourcing ratios indicate that PAHs were predominantly petrogenic, suggesting that elevated PAH levels were influenced by direct releases from the earth. Quantitative human health risk assessment estimated the excess lifetime cancer risks associated with exposure to the measured PAHs. Closest to active wells, the risk estimated for maximum residential exposure was 2.9 in 10,000, which is above the U.S. EPA's acceptable risk level. Overall, risk estimates decreased 30% when comparing results from samplers closest to active wells to those farthest. This work suggests that natural gas extraction may be contributing significantly to PAHs in air, at levels that are relevant to human health. PMID:25810398