Evaluation of Masticatory Stimulation Effect on the Maxillary Transversal Growth in Ectodermal Dysplasia Children.

Science.gov (United States)

Sfeir, Elia; Nahass, Mona G; Mourad, Ayman

2017-01-01

Severe oligodontia is one of the most important symptoms in children with hypohidrotic ectodermal dysplasia (HED). The growth of the maxilla is a key consideration in restoring their mouth. The aim of this study was to evaluate the transversal maxillary sutural growth, after passive masticatory stimulation, in HED children. We also thought to assess the efficiency and functional outcome of the proposed propriocep-tive passive expansion (PPE) prosthetic device. We studied 13 children (age 6-11 years) suffering from HED with severe oligodontia. Their maxilla was restored by a PPE device formed from two parts and joined by a passive slide system. Distance between the two parts was noted at the anterior and posterior regions at each control visit over an average of 23 months. We also conducted and filled a satisfaction questionnaire over the same period. We tested the hypothesis that the posterior expansion is greater than the anterior expansion (one-tailed Student's t-test with p-value Ectodermal Dysplasia Children. Int J Clin Pediatr Dent 2017;10(1):55-61.

Measurement of maxillary sinus volume using Computed Tomography

International Nuclear Information System (INIS)

Park, Chang Hee; Kim, Kee Deog; Park, Chang Seo

2000-01-01

To propose a standard value for the maxillary sinus volume of a normal Korean adult by measuring the width and height of the sinus and analyzing their correlation and the difference of the sinus size respectively between sexes, and on the right and left sides. Fifty-two (95 maxillary sinuses) out of 20 years or over aged patients who had taken CT in the Department of Dental Radiology, Yonsei University, Dental Hospital, between February 1997 and July 1999 who were no specific symptom, prominent bony septa, pathosis, clinical asymmetry and history of surgery in the maxillary sinus were retrospectively analyzed. The mean transverse width, antero-posterior width, height and volume of the normal Korean adult's maxillary sinuses were 28.33 mm, 39.69 mm, 46.60 mm and 21.90 cm 3 , respectively. There was a significant sex difference in the sinus volume (p<0.05). In the mean antero-posterior width, height and volume of the sinus, no significant difference was observed between both sides. All four measurements showed a significant correlation between both sides (p<0.0001). The widths and height of the sinus all showed a significant correlation with the sinus volume (p<0.0001). In the Korean normal adult's maxillary sinus, males tended to be larger than females. Except for the transverse width, all of the measurements showed no significant difference between the right and left side, but significant correlations in the four measurements between both sides were observed. Thus, the overgrowth or undergrowth in the unilateral maxillary sinus may suggest a certain pathosis or developmental abnormalities in the maxillary sinus.

Transverse posterior element fractures associated with torsion

International Nuclear Information System (INIS)

Abel, M.S.

1989-01-01

Six examples of a previously undescribed class of transverse vertebral element fractures are presented. These fractures differ from Chance and Smith fractures and their variants in the following respects: (1) the etiology is torsion and not flexion; (2) there is neither distraction of posterior ring fragments nor posterior ligament tears; (3) in contrast to Chance and Smith fractures, extension of the fracture into the vertebral body is absent or minimal; (4) the transverse process of the lumbar vertebra is avulsed at its base with a vertical fracture, not split horizontally. These fractures occur in cervical, lumbar, and sacral vertebrae in normal or compromised areas of the spine. (orig.)

Three-dimensional analysis of maxillary stability after Le Fort I osteotomy using hydroxyapatite/poly-L-lactide plate.

Science.gov (United States)

Park, Jung-Hyun; Kim, Minkyu; Kim, Sang Yoon; Jung, Hwi-Dong; Jung, Young-Soo

2016-04-01

To evaluate three-dimensional change in maxillary position using biodegradable plates. A total of 53 patients who underwent orthognathic surgery using biodegradable plates were analyzed retrospectively. The position of maxilla was measured three-dimensionally using cone beam computed tomography data at preoperative (T0), 1-month postoperative (T1), and 1-year postoperative (T2) time points. Changes in the maxilla 1 year after the operation (T2-T1) were analyzed to demonstrate postoperative stability. The correlation between postoperative relapse (T2-T1) and surgical movement (T1-T0) of the maxilla was investigated. At 1-year postoperatively, no significant changes in maxillary position were noted in the antero-posterior and transverse dimensions. The anterior maxillary position in the vertical dimension also showed no significant changes, but the posterior maxillary position (posterior nasal spine, greater palatine foramen) showed a 0- to 2.98-mm relapse at 1-year postoperatively. The posterior maxilla tended to relapse inferiorly when the amount of surgical upward movement was greater than 3-3.5 mm and to relapse superiorly when the amount of surgical upward movement was less than 3-3.5 mm. For all patients, no postoperative complications in the osteofixated maxilla were observed during the follow-up period. Maxilla fixed with biodegradable plates was stable in the antero-posterior and transverse and the vertical (anterior maxilla) dimensions. Posterior maxillary vertical relapse was clinically acceptable, but relapse patterns that relate to the amount of surgical upward movement should be considered for surgical treatment planning. Copyright © 2016. Published by Elsevier Ltd.

Transpalatal distraction--state of the art for the individual management of transverse maxillary deficiency--a review of 50 consecutive cases.

Science.gov (United States)

Adolphs, Nicolai; Ernst, Nicole; Menneking, Horst; Hoffmeister, Bodo

2014-12-01

Transpalatal distraction has been established as a technique for surgical assisted rapid palatal/maxillary expansion (SARPE/SARME) in order to correct transverse maxillary deficiency. From 2007 until 2013 bone borne transpalatal distraction devices have been inserted in 50 patients affected by transverse maxillary deficiency and transpalatal distraction has been performed by the same surgical team. Patient records were retrospectively evaluated after ending of the active distraction phase with respect to indication, achieved expansion, additional procedures and side effects. In all cases the existing transverse maxillary deficiency was corrected by means of transpalatal distraction according to the individual needs. No complications were observed that interfered with that therapeutic aim. Evaluation of the records showed a wide variance of parameters which impedes evidence based statements. According to that series transpalatal distraction is a safe, powerful and reliable procedure and can be recommended as a state of the art procedure for the individually adapted correction of transverse maxillary deficiency if well known parameters of distraction are respected. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Manual rotation to decrease operative delivery in posterior or transverse positions.

Science.gov (United States)

Le Ray, Camille; Deneux-Tharaux, Catherine; Khireddine, Imane; Dreyfus, Michel; Vardon, Delphine; Goffinet, François

2013-09-01

To assess the effect of a policy of manual rotation on the mode of delivery of fetuses in posterior or transverse positions at full dilatation. This was a prospective study to compare two policies of management for posterior and transverse positions in two different hospitals (Hospital 1: no manual rotation and Hospital 2: manual rotation). We used univariable and multivariable analyses to study the association between the management policy for posterior and transverse positions at full dilatation in these hospitals and maternal and neonatal outcomes. The principal end point was operative delivery (ie, cesarean or instrumental vaginal delivery). All factors associated with the risk of operative delivery in the univariable analysis (Pmanual rotation was independently associated with a reduction in operative deliveries. The rate of posterior or transverse positions at full dilatation was 15.9% (n=111) in Hospital 1 and 15.3% (n=220) in Hospital 2 (P=.75). Of the 172 attempts of manual rotation in Hospital 2, 155 (90.1%) were successful. The rate of operative delivery was significantly lower in Hospital 2, which performed manual rotations (23.2% compared with 38.7% in Hospital 1, adjusted odds ratio [OR] 0.52, 95% confidence interval [CI] 0.28-0.95). After multivariable analysis, manual rotation remained significantly associated with a reduction in the risk of operative delivery (adjusted OR 0.45, 95% CI 0.25-0.85). Five-minute Apgar score and arterial pH at birth were similar in the two hospitals. For fetuses in posterior or transverse positions at full dilatation, a strategy of manual rotation is associated with a reduction in the rate of operative delivery. III.

Vertical growth control during maxillary expansion using a bonded Hyrax appliance

Directory of Open Access Journals (Sweden)

Francisco Marcelo Paranhos Pinto

2012-02-01

Full Text Available INTRODUCTION: Rapid maxillary expansion (RME for the treatment of maxillary deficiency and posterior crossbite may induce changes in the vertical dimension. Expanders with occlusal splints have been developed to minimize unwanted vertical effects. OBJECTIVE: This preliminary study used cephalometri radiographs to evaluate the vertical effects of RME using a Hyrax appliance in children with maxillary deficiency. METHOD: Twenty-six patients (11 boys; mean age = 8 years and 5 months with maxillary deficiency and posterior crossbite were treated using a Hyrax appliance with an acrylic occlusal splint. Radiographs and cephalometric studies were performed before the beginning of the treatment (T1 and after RME active time (T2, at a mean interval of 7 months. Results were compared with normative values. RESULTS AND CONCLUSIONS: At the end of treatment, there were no statistically significant changes, and measurements were similar to the normative values. Data showed that there were no significant effects on vertical growth, which suggests that appliances with occlusal splints may be used to correct transverse deficiencies regardless of the patient's growth pattern.

Rapid palatal expansion effects on mandibular transverse dimensions in unilateral posterior crossbite patients: a three-dimensional digital imaging study

Directory of Open Access Journals (Sweden)

Alessandro Ugolini

2016-01-01

Full Text Available Abstract Background The purpose of this controlled study was to investigate indirect effects on mandibular arch dimensions, 1 year after rapid palatal expansion (RPE therapy. Methods Thirty-three patients in mixed dentition (mean age 8.8 years showing unilateral posterior crossbite and maxillary deficiency were treated with a RPE (Haas type cemented on the first permanent molars. Treatment protocol consisted of two turns per day until slight overcorrection of the molar transverse relationship occurred. The Haas expander was kept on the teeth as a passive retainer for an average of 6 months. Study models were taken prior (T1 and 15 months on average (T2 after expansion. A control group of 15 untreated subjects with maxillary deficiency (mean age 8.3 years was also recorded with a 12-month interval. Stone casts were digitized with a 3D scanner (3Shape, DK. Results In the treated group, both mandibular intermolar distance (+1.9 mm and mandibular molar angulation (+9° increased. Mandibular incisor angulation showed an increase of 1.9°. There was little effect on intercanine distance and canine angulation. Controls showed a reduction in transverse arch dimension and a decrease in molar and canine angulation values. Conclusions RPE protocol has indirect widening effects on the mandibular incisors and first molars.

Retention period after treatment of posterior crossbite with maxillary expansion: a systematic review

Directory of Open Access Journals (Sweden)

Julia Garcia Costa

Full Text Available ABSTRACT OBJECTIVE: The aim of this systematic review was to evaluate the duration of the retention period in growing patients undergoing maxillary expansion and its relation with posterior crossbite stability. METHODS: Search strategies were executed for electronic databases Cochrane Library, Web of Science, PubMed and Scopus, which were completed on January 15, 2016. The inclusion criteria included randomized, prospective or retrospective controlled trials in growing subjects with posterior crossbite; treated with maxillary expanders; retention phase after expansion; post-retention phase of at least 6 months. The exclusion criteria were anterior crossbite, craniofacial anomalies, surgery or another orthodontic intervention; case reports; author’s opinions articles, thesis, literature reviews and systematic reviews. The risk of bias of selected articles was assessed with Cochrane risk of bias tool for RCTs and Downs and Black checklist for non-RCTs. RESULTS: A total of 156 titles/abstracts was retrieved, 44 full-texts were examined, and 6 articles were selected and assessed for their methodological quality. The retention period after maxillary expansion ranged between 4 weeks and 16 months. Fixed (acrylic plate, Haas, Hyrax and quad-helix or removable (Hawley and Hawley expander appliances were used for retention. CONCLUSIONS: Six months of retention with either fixed or removable appliances seem to be enough to avoid relapse or to guarantee minimal changes in a short-term follow-up.

One-step transversal palatal distraction and maxillary repositioning: technical considerations, advantages, and long-term stability.

Science.gov (United States)

Cortese, Antonio; Savastano, Mauro; Savastano, Germano; Claudio, Pier Paolo

2011-09-01

Transversal maxillary hypoplasia in adolescence is a frequently seen pathology, which can be treated with a combination of surgery and orthodontic treatment to widen the maxilla in skeletally matured patients.We evaluated the advantages of a new surgical technique: Le Fort I distraction osteogenesis using a bone-borne device. Because relapse is one of the main problems in surgical maxillary expansion, long-term stability of this new technique was evaluated. Data from 4 adult patients with maxillary restriction, class III malocclusion, or maxillary malposition were collected preoperatively, 4 months after distraction, and 5 years after distraction. Measurements were recorded on dental models to detect palatal expansion at dental level; cephalograms by lateral and posteroanterior plane were analyzed to detect maxillary movements. Maxillary measurements were substantially stable 5 years after distractions. Only minor dental movements occurred at the dental analysis after 5 years related to a lack of orthodontic contention without any compromise of the dental result (no crossbite relapse and class I stability). Le Fort I with down-fracture for expansion and repositioning by bone-borne distractor device can [corrected] be used to simultaneously widen, advance, and vertically reposition the maxilla without causing healing problems, particularly using a rigid distraction device. Long-term stability can be achieved; however, further studies with a larger number of patients will be necessary for better evaluation.

A Comparison of Equivalent Doses of Lidocaine and Articaine in Maxillary Posterior Tooth Extractions: Case Series

Directory of Open Access Journals (Sweden)

Christopher C. Friedl

2012-06-01

Full Text Available Objectives: Local anaesthesia is the standard of care during dental extractions. With the advent of newer local anesthetic agents, it is often difficult for the clinician to decide which agent would be most efficacious in a given clinical scenario. This study assessed the efficacy of equal-milligram doses of lidocaine and articaine in achieving surgical anaesthesia of maxillary posterior teeth diagnosed with irreversible pulpitis. Material and Methods: This case-series evaluated a total of 41 patients diagnosed with irreversible pulpitis in a maxillary posterior tooth. Patients randomly received an infiltration of either 3.6 mL (72 mg 2% lidocaine with 1:100,000 epinephrine or 1.8 mL (72 mg 4% articaine with 1:100,000 epinephrine in the buccal fold and palatal soft tissue adjacent to the tooth. After 10 minutes, initial anaesthesia of the tooth was assessed by introducing a sterile 27-gauge needle into the gingival tissue adjacent to the tooth, followed by relief of the gingival cuff. Successful treatment was considered to have occurred when the tooth was extracted with no reported pain. Data was analyzed with the Fisher’s exact test, unpaired t-test and normality test. Results: Twenty-one patients received lidocaine and 20 received articaine. Forty of the 41 patients achieved initial anaesthesia 10 minutes after injection: 21 after lidocaine and 19 after articaine (P = 0.488. Pain-free extraction was accomplished in 33 patients: 19 after lidocaine and 14 after articaine buccal and palatal infiltrations (P = 0.226. Conclusions: There was no significant difference in efficacy between equivalent doses of lidocaine and articaine in the anaesthesia of maxillary posterior teeth with irreversible pulpitis.

Ipsilateral Traumatic Posterior Hip Dislocation, Posterior Wall and Transverse Acetabular Fracture with Trochanteric Fracture in an adult: Report of First Case

Directory of Open Access Journals (Sweden)

Skand Sinha

2013-10-01

Full Text Available Introduction: Posterior dislocation of the hip joint with associated acetabular and intertrochanteric fracture is a complex injury. Early recognition, prompt and stable reduction is needed of successful outcome. Case Report: 45 year old male patient presented with posterior dislocation of the hip with transverse fracture with posterior wall fracture of acetabulam and intertrochanteric fracture on the ipsilateral side. The complex fracture geometry was confirmed by CT scan. The patient was successfully managed by open reduction and internal fixation of intertrochanteric fracture was achieved with dynamic hip screw (DHS plate fixation followed by fixation of acetabular fracture with reconstruction plate. Conclusion: Hip dislocation combined with acetabular fracture is an uncommon injury; this article presents a unique case of posterior wall and transverse fractures of ipsilateral acetabulum with intertrochanteric fracture in a patient who sustained traumatic posterior hip dislocation. Early surgical intervention is important for satisfactory outcomes of such complex fracture-dislocation injuries. Keywords: Hip dislocation; acetabular fractures; intertrochanteric fracture; operative treatment.

Avaliação transversal e vertical da maxila, após expansão rápida, utilizando um método de padronização das radiografias póstero-anteriores Transversal and vertical maxillary evaluation, after rapid expansion, using a standardization method for posteroanterior radiographs

Directory of Open Access Journals (Sweden)

Gustavo Mattos Barreto

2005-12-01

Full Text Available OBJETIVO: na presente pesquisa utilizou-se o aparelho Hyrax tendo como objetivo avaliar as alterações transversais e verticais da maxila. Foram selecionados 20 pacientes de ambos os gêneros, entre 7 e 11 anos de idade, que apresentavam mordida cruzada posterior uni ou bilateral. METODOLOGIA: foram realizadas telerradiografias em norma frontal (PA antes e após a expansão. A fim de evitar que a falta de padronização dessas radiografias pudesse influenciar nos resultados, idealizou-se um método de padronização para tais radiografias. RESULTADOS E CONCLUSÕES: os resultados mostraram que a correção da mordida cruzada posterior com o aparelho Hyrax, que ocorreu em todos os casos, foi em função tanto da abertura da sutura palatina mediana como também da inclinação dos molares. A medida JgE-JgD relacionada com a expansão maxilar aumentou significantemente em todos os casos tratados. Nas avaliações dentárias, as medidas verticais não apresentaram diferenças significantes, ao contrário das medidas transversais (FTE-FTD; FBE-FBD; LO.BTE; LO.BTD; BTE.BTD. A largura da cavidade nasal também aumentou significantemente (CNE-CND. O método de padronização proposto permite, portanto, utilizar as medidas que avaliam a expansão rápida da maxila, através das radiografias póstero-anteriores, com segurança, também no sentido vertical.AIM: in the atresia maxillary cases, the most indicated treatment is rapid maxillary expansion that can be achieved by different therapies. In the present research the Hyrax appliance was used in order to evaluate the transverse and vertical outcomes in maxillary base. METHODS: twenty patients of both gender, from 7 to 11 years old, presenting uni or bilateral posterior crossbite were selected. Posteroanterior radiographs were performed before and after expansion. These radiographs were standardized in order to avoid that problems with lack of standardization influence the results. RESULTS AND CONCLUSION

Maxillary overdentures supported by anteriorly or posteriorly placed implants opposed by a natural dentition in the mandible: a 1-year prospective case series study.

Science.gov (United States)

Slot, Wim; Raghoebar, Gerry M; Vissink, Arjan; Meijer, Henny J A

2014-02-01

For maxillary overdenture therapy, treatment guidelines are missing. There is a need for longitudinal studies. The purpose of this 1-year prospective case series study was to assess the treatment outcome of maxillary overdentures supported by six dental implants opposed by natural antagonistic teeth in the mandible. Fifty patients were treated with a maxillary overdenture supported by six dental implants, either placed in the anterior region (n = 25 patients) or in the posterior region (n = 25 patients). Items of evaluation were the following: survival of implants, condition of hard and soft peri-implant tissues, and patients' satisfaction. One-year implant survival rate was 98% in the anterior group and 99.3% in the posterior group. Mean radiographic bone loss in the anterior and posterior groups after 1 year of loading was 0.22 and 0.50 mm, respectively. Mean scores for plaque, calculus, gingiva, bleeding, and pocket probing depth were low, and patients' satisfaction was high, with no differences between the groups. Six dental implants placed in either the anterior region or the posterior region of the edentulous maxilla, connected with a bar, and opposed by antagonistic teeth in the mandible supply a proper base for the support of an overdenture. © 2012 Wiley Periodicals, Inc.

Maxillary sinus augmentation

Directory of Open Access Journals (Sweden)

A B Tarun Kumar

2015-01-01

Full Text Available Placing dental implants in the maxillary posterior region can be both challenging and un-nerving for a regular implant dentist who is not well versed with advanced surgical procedures. It is vital for a general dentist to understand the fundamentals of bone grafting the maxillary sinus if he/she is really committed to providing the best health care for their patients. The dental practice is seeing an increasing group of patients who are living longer, and this group of older baby boomers often has an edentulous posterior maxilla either unilateral or bilateral. When edentulous, the posterior maxilla more likely has diminished bone height, which does not allow for the placement of dental implants without creating additional bone. Through grafting the maxillary sinus, bone of ideal quality can be created (allowing for placement of dental implants, which offer many advantages over other tooth replacement modalities. The sinus graft offers the dental patient a predictable procedure of regenerating lost osseous structure in the posterior maxilla. This offers the patient many advantages for long-term success. If dentists understand these concepts, they can better educate their patients and guide them to have the procedure performed. This article outlines bone grafting of the maxillary sinus for the purpose of placing dental implants. This review will help the readers to understand the intricacies of sinus augmentation. They can relate their patient's condition with the available literature and chalk out the best treatment plan for the patient, especially by using indirect sinus augmentation procedures which are less invasive and highly successful if done using prescribed technique.

Asymmetric rapid maxillary expansion in true unilateral crossbite malocclusion: a prospective controlled clinical study.

Science.gov (United States)

Ileri, Zehra; Basciftci, Faruk Ayhan

2015-03-01

To investigate the short-term effects of the asymmetric rapid maxillary (ARME) appliance on the vertical, sagittal, and transverse planes in patients with true unilateral posterior crossbite. Subjects were divided into two groups. The treatment group was comprised of 21 patients with unilateral posterior crossbite (mean age  =  13.3 ± 2.1 years). Members of this group were treated with the ARME appliance. The control group was comprised of 17 patients with Angle Class I who were kept under observation (mean age  =  12.3 ± 0.8 years). Lateral and frontal cephalograms were taken before the expansion (T1), immediately after expansion (T2), and at postexpansion retention (T3) in the treatment group and at preobservation (T1) and postobservation (T2) in the control group. A total of 34 measurements were assessed on cephalograms. For statistical analysis, the Wilcoxon test and analysis of covariance were used. The ARME appliance produced significant increases in nasal, maxillary base, upper arch, and lower arch dimensions (P ARME appliance created asymmetric increments in the transversal dimensions of the nose, maxilla, and upper arch in the short term. Asymmetric expansion therapy for subjects with unilateral maxillary deficiency may provide satisfactory outcomes in adolescents, with the exception of mandibular arch expansion. The triangular pattern of expansion caused clockwise rotation of the mandible and the occlusal plane and produced significant alterations in the vertical facial dimensions, whereas it created no displacement in maxilla in the sagittal plane.

Análise morfológica do arco superior de portadores de fissura labiopalatal submetidos a diferentes protocolos de expansão rápida maxilar: avaliação das alterações maxilares Morphological analysis of the maxillary arch in patients with cleft lip and palate submitted to different protocols of rapid maxillary expansion: maxillary alterations evaluation

Directory of Open Access Journals (Sweden)

Maíra Massuia de Souza

2009-10-01

Full Text Available INTRODUÇÃO: em portadores de malformações labiopalatais, a boa conformação do arco superior constitui um dos principais requisitos para a obtenção de uma oclusão adequada e para o aperfeiçoamento estético e funcional. Para tanto, a expansão ortopédica da maxila é frequentemente necessária, uma vez que é alta a incidência de colapso dos segmentos. OBJETIVOS: analisar, por meio de modelos de gesso, as dimensões do arco superior de 15 portadores de fissura transforame incisivo unilateral, com deficiências transversal e anteroposterior da maxila, submetidos à expansão com dois diferentes protocolos de ativação. MÉTODOS: um grupo foi submetido à Expansão Rápida da Maxila (ERM com protocolo de ativação convencional (Grupo 1, enquanto no outro grupo foi utilizado o protocolo de ativação preconizado por Liou e Tsai em 2005, com expansões e contrações alternadas (Grupo 2, sendo ambos submetidos posteriormente à protração maxilar com máscara de tração reversa. Os modelos foram obtidos em dois momentos: antes da cimentação do disjuntor do tipo Haas modificado (T1 e após 24 semanas de tratamento (T2. As distâncias transversais entre os primeiros pré-molares superiores (região anterior e a distância entre os primeiros molares superiores (região posterior foram registradas com um paquímetro digital. Os dados obtidos foram submetidos ao teste t de Student. RESULTADOS E CONCLUSÕES: os dois protocolos de ativação mostraram-se igualmente efetivos na expansão maxilar, não havendo diferença entre os grupos em relação ao aumento transversal obtido.INTRODUCTION: Harmonious conformation of the maxillary arch in patients with cleft lip and palate is one of the main requirements for achievement of adequate occlusion and for esthetic and functional improvement. For this purpose, orthopedic maxillary expansion is often required due to the high frequency of the segments collapse. AIM: This study aimed to evaluate the

Long-term stability of soft tissue changes in anterior open bite adults treated with zygomatic miniplate-anchored maxillary posterior intrusion.

Science.gov (United States)

Marzouk, Eiman S; Kassem, Hassan E

2018-03-01

To evaluate soft tissue changes and their long-term stability in skeletal anterior open bite adults treated by maxillary posterior teeth intrusion using zygomatic miniplates and premolar extractions. Lateral cephalograms of 26 patients were taken at pretreatment (T1), posttreatment (T2), 1 year posttreatment (T3), and 4 years posttreatment (T4). At the end of treatment, the soft tissue facial height and profile convexity were reduced. The lips increased in length and thickness, with backward movement of the upper lip and forward movement of the lower lip. The total relapse rate ranged from 20.2% to 31.1%. At 4 years posttreatment, 68.9% to 79.8% of the soft tissue treatment effects were stable. The changes in the first year posttreatment accounted for approximately 70% of the total relapse. Soft tissue changes following maxillary posterior teeth intrusion with zygomatic miniplates and premolar extractions appear to be stable 4 years after treatment.

Maxillary tridimensional changes after slow expansion with leaf expander in a sample of growing patients: a pilot study.

Science.gov (United States)

Lanteri, V; Gianolio, A; Gualandi, G; Beretta, M

2018-03-01

The aim of this study is to evaluate the dento-alveolar effects of slow maxillary expansion using the Leaf Expander in a sample of growing patients with maxillary transverse deficiency, unilateral cross bite and mandibular shift. The study included 10 patients, 3 male and 7 female (mean age 7.5 + 7 months), treated with Leaf Expander anchored on the upper deciduous teeth. Digital models were obtained by a lab scan of the pvs impressions at the beginning of the therapy (T1) and at the removal of the palatal expander (T2). Five parameters were measured: 1) the distance between the first upper permanent molars; 2) the distance between the upper second deciduous molars; 3) the distance between the upper canine cusps 4) the distance between the first lower permanent molars; 5) the distance of the lower canine cusps. In all patients complete correction of posterior crossbite was achieved on average in 4 months, with a spontaneous expansion of the upper first permanent molars. Significant increases in the dento-alveolar transversal diameters were obtained. Increases were also observed in the anterior mandibular arch diameter (+ 1 mm). These findings suggest that slow maxillary expansion using Leaf Expander appliance could be a reasonable alternative to conventional maxillary expansion therapy in the early mixed dentition.

Conventional bone-anchored palatal distractor using an orthodontic palatal expander for the transverse maxillary distraction osteogenesis: technical note.

Science.gov (United States)

Iida, Seiji; Haraguchi, Seiji; Aikawa, Tomonao; Yashiro, Kohtaro; Okura, Masaya; Kogo, Mikihiko

2008-02-01

Surgical-assisted rapid palatal expansion includes various treatment procedures for solving transverse maxillary deficiencies, especially in cases with a matured palatal suture. Recent introduction of the concept of distraction osteogenesis has contributed to generalize this useful treatment and to develop some bone-borne devices that will not cause the problems found in cases treated by tooth-supported palatal expander. This report shows a conventional bone-borne distractor using commercially available orthodontic palatal expansion screws. The distractor consists of 2 parts: one is a commercially available orthodontic palatal expansion screw (Hyrax type, Fan style) and another is a screw-ring, which is one of the attached parts of the mandibular distraction system. The bone screws are inserted transmucosally to the palatal bone via the screw-rings. The palatal distractor can be applied to varied palatal shapes and can expand the palate without any trouble. This conventional palatal distractor may contribute to generalize the transpalatal maxillary distraction osteogenesis for cases with maxillary teeth problems.

Transverse maxillary distraction with a bone-anchored appliance: dento-periodontal effects and clinical and radiological results.

Science.gov (United States)

Ramieri, G A; Spada, M C; Austa, M; Bianchi, S D; Berrone, S

2005-06-01

In 29 adult patients presenting with maxillary deficiency, a bone-anchored palatal distractor (Surgi-Tec NV, Brugge, Belgium) was applied after osteotomy of the anterolateral walls of the maxillary sinuses, midpalatal suture, and, eventually, separation of the pterygomaxillary sutures. Expansion proceeded at a rate of 0.33-0.66 mm per day and the device was retained for 4-6 months for consolidation. Active orthodontic therapy was started after 8-10 weeks. The increment of arch width and the perimeter were evaluated using dental casts. Tooth thermal sensitivity and the periodontal side effects of treatment were monitored clinically after distraction, at device removal, and after 1 year. Bone healing was also investigated during the procedure using conventional radiological techniques. This experience confirms that transverse maxillary distraction is an effective technique in adult patients, leading to the formation of new bone. There were no noticeable intraoperative complications, but postsurgical periodontal side effects were documented. The procedure offers advantages over traditional teeth-borne appliances in terms of rapidity of treatment and the absence of mechanical forces acting on the teeth. Further evaluation is required to assess the long-term stability and periodontal consequences of this technique.

Ligation of the internal maxillary artery for intractable epistaxis. 3D imaging of internal maxillary artery using helical CT scan

International Nuclear Information System (INIS)

Handa, Toru; Yazin, Koji; Hirakawa, Katsuhiro; Fukushima, Noriyuki; Takumida, Masaya; Hirata, Shitau; Iguchi, Tetsuhiko; Amano, Yoshiharu

2001-01-01

Sever posterior epistaxis is one of the serious clinical problems. Nasal bleeding usually occurs in the anterior septal region, where it can be seen easily and controlled with topical cautery or localized packing. When the bleeding occurs in the posterior nose, it becomes a more serious problem. Many methods have been used to control posterior epistaxis. Some of these are electrocautery, posterior nasal packing, vascular ligation and therapeutic percutaneous embolization. Between 1997 and 2000, nineteen patients were admitted to our hospital because of intractable epistaxis. There were 16 male and 3 female patients whose average age was 55 years. Ten of 19 patients were hypertensive, and none of these had undergoing treatment. Five of 19 patients received maxillary artery ligation. Clinical applications of 3D imaging of the internal maxillary artery using helical CT scan were done for 5 patients. These images were helpful for planning of ligation of the internal maxillary artery. (author)

Ligation of the internal maxillary artery for intractable epistaxis. 3D imaging of internal maxillary artery using helical CT scan

Energy Technology Data Exchange (ETDEWEB)

Handa, Toru [Akitsu Prefectual Hospital, Hiroshima (Japan); Yazin, Koji; Hirakawa, Katsuhiro; Fukushima, Noriyuki; Takumida, Masaya; Hirata, Shitau; Iguchi, Tetsuhiko; Amano, Yoshiharu

2001-03-01

Sever posterior epistaxis is one of the serious clinical problems. Nasal bleeding usually occurs in the anterior septal region, where it can be seen easily and controlled with topical cautery or localized packing. When the bleeding occurs in the posterior nose, it becomes a more serious problem. Many methods have been used to control posterior epistaxis. Some of these are electrocautery, posterior nasal packing, vascular ligation and therapeutic percutaneous embolization. Between 1997 and 2000, nineteen patients were admitted to our hospital because of intractable epistaxis. There were 16 male and 3 female patients whose average age was 55 years. Ten of 19 patients were hypertensive, and none of these had undergoing treatment. Five of 19 patients received maxillary artery ligation. Clinical applications of 3D imaging of the internal maxillary artery using helical CT scan were done for 5 patients. These images were helpful for planning of ligation of the internal maxillary artery. (author)

Prediction of changes due to mandibular autorotation following miniplate-anchored intrusion of maxillary posterior teeth in open bite cases.

Science.gov (United States)

Kassem, Hassan E; Marzouk, Eiman S

2018-05-14

Prediction of the treatment outcome of various orthodontic procedures is an essential part of treatment planning. Using skeletal anchorage for intrusion of posterior teeth is a relatively novel procedure for the treatment of anterior open bite in long-faced subjects. Data were analyzed from lateral cephalometric radiographs of a cohort of 28 open bite adult subjects treated with intrusion of the maxillary posterior segment with zygomatic miniplate anchorage. Mean ratios and regression equations were calculated for selected variables before and after intrusion. Relative to molar intrusion, there was approximately 100% vertical change of the hard and soft tissue mention and 80% horizontal change of the hard and soft tissue pogonion. The overbite deepened two folds with 60% increase in overjet. The lower lip moved forward about 80% of the molar intrusion. Hard tissue pogonion and mention showed the strongest correlations with molar intrusion. There was a general agreement between regression equations and mean ratios at 3 mm molar intrusion. This study attempted to provide the clinician with a tool to predict the changes in key treatment variables following skeletally anchored maxillary molar intrusion and autorotation of the mandible.

Truncal anaesthesia of the maxillary nerve for outpatient surgically assisted rapid maxillary expansion.

Science.gov (United States)

Robiony, M; Demitri, V; Costa, F; Politi, M; Cugini, U

1998-10-01

We present our experience of transcutaneous truncal anaesthesia of the maxillary nerve in association with transmucosal anaesthesia of the sphenopalatine ganglion in surgically assisted rapid maxillary expansion. Twelve patients with a skeletal transverse discrepancy of the maxilla were treated in our department from 1994 to 1995. Maxillary transcutaneous nerve block was done with a Quincke 8 cm spinal needle together with transmucosal anaesthesia of the sphenopalatine ganglion. Mepivacaine without adrenaline and sodium bicarbonate 1/10 was used for truncal anaesthesia and lidocaine-prilocaine cream for transmucosal anaesthesia. A Le Fort I osteotomy, lateral nasal wall osteotomy, pterygomaxillary osteotomy, and a palatal osteotomy were done for all patients before the maxillary expansion. Total anaesthesia of the maxillary area facilitated the operations and appreciably reduced the amount of postoperative pain. The ease of achieving effective anaesthesia before and after operation and the absence of side-effects make this form of anaesthetic particularly useful in surgically assisted rapid maxillary expansion.

Distances from the root apices of posterior teeth to the maxillary sinus and mandibular canal in patients with skeletal open bite: A cone-beam computed tomography study

Energy Technology Data Exchange (ETDEWEB)

Kosumarl, Werinpimol [Dental Division, Suan Phueng Hospital, Ratchaburi (Thailand); Patanaporn, Virush; Jotikasthira, Dhirawat; Janhom, Apirum [Faculty of Dentistry, Chiang Mai University, Chiang Mai (Thailand)

2017-09-15

This study determined and compared the distances from the maxillary root apices of posterior teeth to the floor of the maxillary sinus, or maxillary sinus distances (MSDs), and the distances from the mandibular root apices of the posterior teeth to the mandibular canal, or mandibular canal distances (MCDs), in Thai subjects with skeletal open bite and skeletal normal bite. Pretreatment cone-beam computed tomography (CBCT) images were obtained from 30 Thai orthodontic patients (15 patients with skeletal normal bite and 15 with skeletal open bite) whose ages ranged from 14 to 28 years. The CBCT images of the patients were processed and measured using the Romexis Viewer program. The MSDs and MCDs from the root apices of the maxillary and mandibular second premolar, first molar, and second molar to the maxillary sinus floor or the mandibular canal were measured perpendicularly to the occlusal plane. The Student t test was used for comparisons between the 2 groups. The greatest mean MSDs were from the root apex of the second premolars in both groups, whereas the least mean MSDs were from the mesiobuccal root apex of the second molars. The greatest mean MCDs were from the mesial root apex of the first molars, whereas the least mean MCDs were from the distal root apex of the second molars. There were no differences in the mean MSDs or the mean MCDs between the skeletal normal bite group and the skeletal open bite group.

Distances from the root apices of posterior teeth to the maxillary sinus and mandibular canal in patients with skeletal open bite: A cone-beam computed tomography study

International Nuclear Information System (INIS)

Kosumarl, Werinpimol; Patanaporn, Virush; Jotikasthira, Dhirawat; Janhom, Apirum

2017-01-01

This study determined and compared the distances from the maxillary root apices of posterior teeth to the floor of the maxillary sinus, or maxillary sinus distances (MSDs), and the distances from the mandibular root apices of the posterior teeth to the mandibular canal, or mandibular canal distances (MCDs), in Thai subjects with skeletal open bite and skeletal normal bite. Pretreatment cone-beam computed tomography (CBCT) images were obtained from 30 Thai orthodontic patients (15 patients with skeletal normal bite and 15 with skeletal open bite) whose ages ranged from 14 to 28 years. The CBCT images of the patients were processed and measured using the Romexis Viewer program. The MSDs and MCDs from the root apices of the maxillary and mandibular second premolar, first molar, and second molar to the maxillary sinus floor or the mandibular canal were measured perpendicularly to the occlusal plane. The Student t test was used for comparisons between the 2 groups. The greatest mean MSDs were from the root apex of the second premolars in both groups, whereas the least mean MSDs were from the mesiobuccal root apex of the second molars. The greatest mean MCDs were from the mesial root apex of the first molars, whereas the least mean MCDs were from the distal root apex of the second molars. There were no differences in the mean MSDs or the mean MCDs between the skeletal normal bite group and the skeletal open bite group

The biomechanical effect of transverse connectors use in a pre- and postlaminectomy model of the posterior cervical spine: an in vitro cadaveric study.

Science.gov (United States)

Majid, Kamran; Gudipally, Manasa; Hussain, Mir; Moldavsky, Mark; Khalil, Saif

2011-12-15

An in vitro biomechanical study investigating the effect of transverse connectors on posterior cervical stabilization system in a laminectomy model. To evaluate the optimal design, number, and location of the transverse connectors in stabilizing long segment posterior instrumentation in the cervical spine. In the cervical spine, lateral mass screw (LMS) fixation is used for providing stability after decompression. Transverse connectors have been used to augment segmental posterior instrumentation. However, in the cervical region the optimal design, number, and the location of transverse connectors is not known. Seven fresh human cervicothoracic cadaveric spines (C2-T1) were tested by applying ±1.5 Nm moments in flexion (F), extension (E), lateral bending (LB), and axial rotation (AR). After testing the intact condition, LMS/rods were placed and then were tested with two different transverse connectors (top-loading connector [TL] and the head-to-head [HH] connector) in multiple levels, pre- and postlaminectomy (PL). LMS significantly reduced segmental motion by 77.2% in F, 75.6% in E, 86.6% in LB, and 86.1% in AR prelaminectomy and by 75.4% in F, 76% in E, 80.6% in LB, and 76.4% in AR postlaminectomy compared to intact (P transverse connectors is significant in AR, when using two connectors at the proximal and distal ends, compared to one connector. In a clinical setting, this data may guide surgeons on transverse connector configurations to consider during posterior cervical instrumentation.

Skeletal response to maxillary protraction with and without maxillary expansion: a finite element study.

Science.gov (United States)

Gautam, Pawan; Valiathan, Ashima; Adhikari, Raviraj

2009-06-01

The purpose of this finite element study was to evaluate biomechanically 2 treatment modalities-maxillary protraction alone and in combination with maxillary expansion-by comparing the displacement of various craniofacial structures. Two 3-dimensional analytical models were developed from sequential computed tomography scan images taken at 2.5-mm intervals of a dry young skull. AutoCAD software (2004 version, Autodesk, San Rafael, Calif) and ANSYS software (version 10, Belcan Engineering Group, Cincinnati, Ohio) were used. The model consisted of 108,799 solid 10 node 92 elements, 193,633 nodes, and 580,899 degrees of freedom. In the first model, maxillary protraction forces were simulated by applying 1 kg of anterior force 30 degrees downward to the palatal plane. In the second model, a 4-mm midpalatal suture opening and maxillary protraction were simulated. Forward displacement of the nasomaxillary complex with upward and forward rotation was observed with maxillary protraction alone. No rotational tendency was noted when protraction was carried out with 4 mm of transverse expansion. A tendency for anterior maxillary constriction after maxillary protraction was evident. The amounts of displacement in the frontal, vertical, and lateral directions with midpalatal suture opening were greater compared with no opening of the midpalatal suture. The forward and downward displacements of the nasomaxillary complex with maxillary protraction and maxillary expansion more closely approximated the natural growth direction of the maxilla. Displacements of craniofacial structures were more favorable for the treatment of skeletal Class III maxillary retrognathia when maxillary protraction was used with maxillary expansion. Hence, biomechanically, maxillary protraction combined with maxillary expansion appears to be a superior treatment modality for the treatment of maxillary retrognathia than maxillary protraction alone.

Pharyngeal airway changes associated with maxillary distraction osteogenesis in adult cleft lip and palate patients.

Science.gov (United States)

Aksu, Muge; Taner, Tülin; Sahin-Veske, Pınar; Kocadereli, Ilken; Konas, Ersoy; Mavili, Mehmet Emin

2012-02-01

To investigate 1) the changes in pharyngeal airway sizes associated with maxillary distraction osteogenesis and 2) the correlations between maxillary skeletal variables and the pharyngeal airway in adult patients with cleft lip and palate. The study was carried out in 14 adult subjects with cleft lip and palate. Predistraction records were taken at a mean age of 22.7 ± 4.6 years. All patients had placement of a rigid external distraction device (RED I; KLS Martin, Tuttlingen, Germany) after Le Fort I osteotomy. Lateral cephalograms were assessed before surgery and at short-term follow-up (8.0 ± 6.4 months). The cephalometric skeletal and pharyngeal airway variables were statistically evaluated by use of the Wilcoxon signed-rank test. Spearman ρ correlation was performed to check the correlations between maxillary skeletal and pharyngeal variables. The maxillary movement was 8.7 mm (P maxillary depth angle (+7.9°) and effective maxillary length (9.4 mm) increased significantly (P distraction, whereas the palatal plane angle remained unchanged. Anterior nasal spine (8.2 mm) and Posterior nasal spine (6.9 mm) moved anteriorly. The overjet increased (9.5 mm) significantly (P maxillary movement. PNS changes showed the highest correlation with posterior airway changes. The significant anterior movement of the maxilla resulted in significant increases in posterior, superoposterior, and middle airway spaces. The posterior airway space showed the highest significant positive correlation with the movement of PNS. The posterior and superoposterior airway spaces also showed significant positive correlations with the maxillary skeletal variables. Copyright © 2012 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Classe II divisão 1 associada à deficiência transversal maxilar. Tratamento com disjuntor tipo Hyrax e aparelho de Herbst: relato de caso clínico Class II division 1 associated with maxillary transverse deficiency treated by Hyrax expander and Herbst appliance: clinical case report

Directory of Open Access Journals (Sweden)

Camila Leite Quaglio

2009-10-01

Full Text Available A má oclusão de Classe II divisão 1 de Angle é, frequentemente, acompanhada da atresia maxilar. Esse problema transversal da maxila deve ser corrigido, sempre que possível, antes da correção anteroposterior, sendo que os aparelhos de expansão rápida são os mais utilizados para isso. Para a correção da Classe II, atualmente, os aparelhos funcionais fixos são os mais estudados e empregados, por serem aparelhos intrabucais e necessitarem de menor colaboração do paciente. O objetivo deste estudo é demonstrar a estabilidade dos resultados obtidos após seis anos de tratamento com expansor tipo Hyrax, seguido do aparelho funcional fixo de Herbst e aparelho fixo. Após uma revisão da literatura, será apresentado um caso clínico, com atresia maxilar e má oclusão de Classe II divisão 1, tratado com essa terapia. O tratamento foi realizado em um curto período de tempo, com resultados funcionais e estéticos satisfatórios e mantidos ao longo dos anos.The Angle Class II division 1 malocclusion is often accompanied by maxillary transverse deficiency. When ever is possible, this maxillary transverse problem must be corrected before the anteroposterior correction. The rapid maxillary expanders is the appliance more used to correct the transverse deficiency. For the Class II malocclusion correction the fixed functional appliances are more studied and used. They are a kind of intraoral appliance that almost don't need patient's collaboration. The aim of this study is to show the results' stability after six years of the orthodontic treatment with Hyrax expander, followed by Herbst and straight wire appliances. After a literature review, a clinical case with maxillary transverse deficiency and Class II division 1 malocclusion treated with this therapy is reported. The treatment duration was very brief and the results were functionally and esthetically satisfactory with a long-term stability.

Surgical management of cross-bites in orthognathic surgery: Surgically assisted rapid maxillary expansion (SARME) versus two-piece maxilla.

Science.gov (United States)

Seeberger, Robin; Gander, Evelyn; Hoffmann, Jürgen; Engel, Michael

2015-09-01

The surgical treatment of cross-bites includes surgically-assisted maxillary expansion (SARME) or maxillary-bipartition during bimaxillary surgery. This study evaluates and compares the changes in the teeth and lower nasal passage, as well as the stability of the expansion. The measurements were performed on the cone-beam computed tomography (CBCT) scans of 32 patients with transverse (width) deficiencies of the maxilla. To expand the maxilla, 12 patients underwent the two-piece maxilla method, while 20 patients received SARME. The mean distraction width for SARME was 6.8 mm (SD 3.7), while that for the two-piece maxilla was 4.1 mm (SD 1.6). The expansion with SARME was over the entire length of the maxilla, from anterior to posterior, whereas the expansion of the two-piece patient group was only in the posterior part of the maxilla. The segments of the maxilla opened nearly parallel in SARME, while they were reverse V-shaped in the two-piece maxilla, from anterior to posterior. A key point in the planning of combined orthodontic-orthognathic therapy with surgical correction of a cross-bite is the precise determination of the area where the width needs to be increased, and the amount of correction needed to treat the patient using minimal surgical procedures. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Adjustable selective maxillary expansion combined with maxillomandibular surgery: A case report.

Science.gov (United States)

Leyder, Patrick; Altounian, Gérard; Chardain, Jacques; Quilichini, Julien

2015-09-01

Surgically assisted rapid maxillary expansion (SARME) is usually considered the gold standard for maxillary transverse expansion in adults. However, a second surgical procedure is needed in cases of associated sagittal or vertical discrepancies. We describe the use of two new innovative devices for the correction of discrepancies in all dimensions during a single surgical procedure, thus reducing treatment duration. We report the case of a 21-year-old female patient, referred to our department for skeletal Class III malocclusion associated with right-side laterognathism and transverse maxillary deficiency. The patient underwent one-stage surgery, using sliding osteosynthesis plates and an adjustable bone-borne distractor. Pre-surgical orthodontics consisted in leveling and aligning the mandibular arch; maxillary leveling was initiated 3 months before surgery. Postoperative palatal distraction combined with orthodontic finishing enabled complete correction of dental and bony discrepancies after 3 months. In our experience, treatment of transverse, sagittal and vertical discrepancies has been possible in a single surgical procedure, using two innovative techniques: sliding osteosynthesis and an adjustable bone distractor. Two years post-surgery, the correction is stable in all dimensions. Copyright © 2015. Published by Elsevier Masson SAS.

Bilateral iatrogenic maxillary fractures after dental treatment in two aged horses

OpenAIRE

Widmer, A; Fürst, A; Bettschart-Wolfensberger, R; Makara, M; Geyer, H; Kummer, M

2010-01-01

This clinical report describes two horses with bilateral maxillary fractures following dental treatment. The fractures occurred during dental treatment by a veterinarian, and both had rostral, transverse, and complete bilateral maxillary fractures with instability and minimal displacement. The fractures were repaired using bilateral intraoral wiring with the patients under general anesthesia. The postoperative period was without complications and the fractures healed as expected. Maxillary fr...

Maxillary unicystic ameloblastoma: a case report.

Science.gov (United States)

Agani, Zana; Hamiti-Krasniqi, Vjosa; Recica, Jehona; Loxha, Mergime Prekazi; Kurshumliu, Fisnik; Rexhepi, Aida

2016-10-18

Ameloblastoma is a benign epithelial odontogenic tumor. It is often aggressive and destructive, with the capacity to attain great size, erode bone and invade adjacent structures. Unicystic ameloblastoma is a rare odontogenic lesion, with clinical, radiographic and gross features of jaw cysts. The lesion histologically shows typical ameloblastomatous epithelium lining part of the cyst cavity with or without and/or mural tumor growth. Unicystic ameloblastoma usually presents in posterior mandibular ramus region, while it is rare and atypical in posterior maxillary region. . We report a case of 16 year old Kosovar male, Albanian ethnicity, who presented with a swelling located in right maxillary region. Clinical examination revealed a painless swelling extending from the maxillary right central incisor to the maxillary right first molar tooth. Panoramic radiograph disclosed a well corticated unilocular radiolucent lesion approximately 5 × 5 cm in diameter which was in contact with the roots of the teeth present inferiorly and with the maxillary sinus superiorly. Maxillary right canine impaction was noted and unerupted lateral incisor tooth was present inside the radiolucency. Preoperative diagnosis of the lesion was made as dentigerous cyst based on the age of the patient, location of the swelling, clinical and radiographic findings, but the unicystic ameloblastoma was also taken into consideration. The patient was treated by surgical enucleation of the lesion and extraction of lateral incisor tooth which was present inside the lesion. The histopathological examination of the lesion revealed confirmed finding for unicystic ameloblastoma mural form. No recurrence was observed in 1 year follow-up. Maxillary region is considered a rare and atypical location for unicystic ameloblastoma. We emphasize the importance of differential diagnosis of an odontogenic lesion with common clinical and radiological features that will impact the treatment planning and follow up

An alternative clinical approach to achieve greater anterior than posterior maxillary expansion in cleft lip and palate patients.

Science.gov (United States)

Oliveira, Dauro Douglas; Bartolomeo, Flávia Uchôa Costa; Cardinal, Lucas; Figueiredo, Daniel Santos Fonseca; Palomo, Juan Martin; Andrade, Ildeu

2014-11-01

Cleft lip and palate patients commonly present maxillary constriction, particularly in the anterior region. The aim of this case report was to describe an alternative clinical approach that used a smaller Hyrax screw unconventionally positioned to achieve greater anterior than posterior expansion in patients with complete unilateral cleft lip and palate. The idea presented here is to take advantage of a reduced dimension screw to position it anteriorly. When only anterior expansion was needed (patient 1), the appliance was soldered to the first premolar bands and associated to a transpalatal arch cemented to the first molars. However, when overall expansion was required (patient 2), the screw was positioned anteriorly, but soldered to the first molar bands. Intercanine, premolar, and first molar widths were measured on dental casts with a digital caliper. Pre-expansion and postexpansion radiographs and tomographies were also evaluated. A significant anterior expansion and no intermolar width increase were registered in the first patient. Although patient 2 also presented a greater anterior than posterior expansion, a noteworthy expansion occurred at the molar region. The alternative approach to expand the maxilla in cleft patients reported here caused greater anterior than posterior expansion when the Mini-Hyrax was associated to a transpalatal arch, and its reduced dimension also minimized discomfort and facilitated hygiene.

Maxillary sinus floor extension and posterior tooth inclination in adolescent patients with Class II Division 1 malocclusion treated with maxillary first molar extractions

NARCIS (Netherlands)

Livas, Christos; Halazonetis, Demetrios J.; Booij, Johan Willem; Pandis, Nikolaos; Tu, Yu-Kang; Katsaros, Christos

Introduction: Our objective was to investigate potential associations between maxillary sinus floor extension and inclination of maxillary second premolars and second molars in patients with Class II Division 1 malocclusion whose orthodontic treatment included maxillary first molar extractions.

Maxillary sinus floor extension and posterior tooth inclination in adolescent patients with Class II Division 1 malocclusion treated with maxillary first molar extractions

NARCIS (Netherlands)

Livas, C.; Halazonetis, D.J.; Booij, J.W.; Pandis, N.; Tu, Y.K.; Katsaros, C.

2013-01-01

INTRODUCTION: Our objective was to investigate potential associations between maxillary sinus floor extension and inclination of maxillary second premolars and second molars in patients with Class II Division 1 malocclusion whose orthodontic treatment included maxillary first molar extractions.

Orthopantomographic study of the maxillary sinus

Energy Technology Data Exchange (ETDEWEB)

Kim, Hyun Joo; Yu, Dong Su [School of Dentistry, Seoul National University, Seoul (Korea, Republic of)

1971-11-15

The author has observed the orthopantomograms of the maxillary sinus which were taken by special exposure method to study mesiodistal dimension, shape, symmetrical relationship, bony septum of the maxillary sinus and relationship between upper lst molar and the maxillary sinus, that were selected 56 cases of 23 to 27 years old male, who have good systemic conditions and no missing teeth on upper posterior molar in normal occlusion, and obtained following conclusions: 1. Mesiodistal dimensions of the maxillary sinus are shown as follows; The mean of left dimension is 50.94 {+-} 8.34 mm and of right dimension is 49.50 {+-} 9.87 mm. 2. To the shape of the maxillary sinus, V or U shape are 33 cases(29.5%) and W shape are 77 cases (70.5%). 3. In the ralationship between upper lst molar and floor of the maxllary sinus, superimposition are 62 cases (55.36%) a nd approach are 50 cases (44.64%). 4. In the right and left symmetrical relationship of the maxillary sinus, symmetry are 37 cases (66.07%) and asymmetry are 19 cases (33.93%). 5. The bony septums in the maxillary sinuses revealed that presence of bony septums are 29 cases (25.8%) and absence ar e 83 cases (74.11%).

Incisive papilla and positions of maxillary anterior teeth among ...

African Journals Online (AJOL)

Results: One hundred and twelve maxillary casts generated from participants aged 18-35 years (mean age 22.39±2.00 years), with well aligned arches were studied. The maxillary central incisor exhibited a mean of 14.93±1.52mm from the posterior limit of the incisive papilla while the inter-canine line scored a mean of ...

Measurement of Blood Flow in an Intracranial Artery Bypass From the Internal Maxillary Artery by Intraoperative Duplex Sonography.

Science.gov (United States)

Yu, Zaitao; Shi, Xiang'en; Brohi, Shams Raza; Qian, Hai; Liu, Fangjun; Yang, Yang

2017-02-01

This study explored the hemodynamic characteristics of a subcranial-intracranial bypass from the internal maxillary artery by measuring blood flow on intraoperative duplex sonography. The hemodynamic parameters of the internal maxillary artery (n = 20), radial artery (n = 20), internal maxillary artery-middle cerebral artery bypass (n = 42), and internal maxillary artery-posterior cerebral artery bypass (n = 9) were measured by intraoperative duplex sonography. There was no significant difference in the internal diameters of the internal maxillary and radial arteries (mean ± SD, 2.51 ± 0.34 versus 2.56 ± 0.22 mm; P = .648). The mean radial artery graft length for subcranial-intracranial bypasses was 88.5 ± 12.78 mm (95% confidence interval [CI], 80.8-90.2 mm). Internal maxillary artery-middle cerebral artery bypasses required a shorter radial artery graft than internal maxillary artery-posterior cerebral artery bypasses (77.8 ± 2.47 versus 104.8 ± 4.77 mm; P = .001). The mean flow volumes were 85.3 ± 18.5 mL/min (95% CI, 76.6-93.9 mL/min) for the internal maxillary artery, 72.6 ± 26.4 mL/min (95% CI, 64.3-80.9 mL/min) for internal maxillary artery-middle cerebral artery bypasses, and 45.4 ± 6.7 mL/min (95% CI, 40.7-50.0 mL/min) for internal maxillary artery-posterior cerebral artery bypasses. All grafts were opened after the success of the salvage procedures had been established, and the early patency rates (1 month after the operation) were 95% for internal maxillary artery-middle cerebral artery bypasses and 100% the internal maxillary artery-posterior cerebral artery bypasses. Measurement of blood flow by intraoperative sonography can be helpful in decision making and predicting graft patency and success after neurosurgical bypass procedures. © 2016 by the American Institute of Ultrasound in Medicine.

Evaluation of stress patterns on maxillary posterior segment when intruded with mini implant anchorage: A three-dimensional finite element study

Directory of Open Access Journals (Sweden)

Nikhita Pekhale

2016-01-01

Full Text Available Introduction: The aim of this study is to evaluate stress and displacement effects of maxillary posterior intrusion mechanics with mini-implant anchorage by using finite element method. Materials and Methods: A computer stimulation of three-dimensional model maxilla with all teeth, PDL, bone, mini-implants, brackets, arch wire, force element, and transpalatal arch was constructed on the basis of average anatomic morphology. Finite element analysis was done to evaluate the amount of stress and its distribution during orthodontic intrusive force. Results: Increased Von Mises stress values were observed in mesio-cervical region of first molar. The middle third of second premolar and second molar and regions adjacent to force application sites also showed relatively high stress values. Minimum stress values were observed in apical region of first premolar as it is away from force application. Conclusion: Using three mini-implant and transpalatal arches, this study demonstrates that significant amount of true intrusion of maxillary molars could be obtained with lesser concentration of stresses in the apical area recorded.

A radiographic study of the experimental lesions in the maxillary sinus

International Nuclear Information System (INIS)

Lee, Joo Hyun; Hwang, Eui Hwan; Lee, Sang Rae

1994-01-01

The purpose of this study was to examine the differences in representation of a globular radiopaque mass on the pantomograms and Waters' views and to compare the efficacy of periapical radiograms, pantomograms and Waters' views in detection of defects on the internal walls of the maxillary sinus. This study was performed with dried human skull. For the study of difference of radiopaque mass shadow in the two views, rubber ball with a diameter of 10mm was used as the experimental lesion. It was placed successively on the internal wall of the anterior, posterior, medial, lateral walls and floor of the maxillary sinus. To examine the detectability of defects for radiographic techniques, defects were formed in the anterior, posterior, medial, lateral walls, and floor of the maxillary sinus. They were formed with 0.5 mm, 0.75 mm, 1.0 mm, 2.0 mm and 3.0 mm sized steel round burs with a slow speed dental handpiece. By subsequently plugging the holes with zinc oxide eugenol paste, radiopaque defects were produced. After that the periapical radiograms, the pantomograms and the Waters' views were taken each and every defect. The obtained results were as follows: 1. Rubber balls placed on each internal wall of maxillary sinus were correctly depicted on the posterior wall and the floor in case of the pantomogram, and on the anterior wall and the medial wall in case of the Waters' view. 2. On the detectability of defects for each radiographic technique, radiolucent defects were detected in different places of each technique. Periapical radiogram could detect 1.0 mm defect on the floor of the maxillary sinus, pantomogram could detect 2.0 mm defect on every internal wall of the maxillary sinus, and Waters' view could detect 3.0 mm defect on the anterior wall of the maxillary sinus. 3. On the detectability of defects for each radiographic technique, radiopaque defects were detected in different places for each technique. Periapical radiogram could clearly detect 0.5 mm defect on

Dentoskeletal outcomes of a rapid maxillary expander with differential opening in patients with bilateral cleft lip and palate: A prospective clinical trial

Science.gov (United States)

Garib, Daniela; De Cássia Moura Carvalho Lauris, Rita; Calil, Louise Resti; De Medeiros Alves, Arthur César; Janson, Guilherme; De Almeida, Araci Malagodi; Cevidanes, Lúcia Helena Soares; Lauris, José Roberto Pereira

2017-01-01

Introduction The purpose of this 2-arm parallel study was to evaluate the dentoskeletal effects of rapid maxillary expansion with differential opening (EDO) compared with the hyrax expander in patients with complete bilateral cleft lip and palate. Methods A sample of patients with complete bilateral cleft lip and palate was prospectively and consecutively recruited. Eligibility criteria included participants in the mixed dentition with lip and palate repair performed during early childhood and maxillary arch constriction with a need for maxillary expansion before the alveolar bone graft procedure. The participants were consecutively divided into 2 study groups. The experimental and control groups comprised patients treated with rapid maxillary expansion using EDO and the hyrax expander, respectively. Cone-beam computed tomography examinations and digital dental models of the maxillary dental arches were obtained before expansion and 6 months postexpansion. Standardized cone-beam computed tomography coronal sections were used for measuring maxillary transverse dimensions and posterior tooth inclinations. Digital dental models were used for assessing maxillary dental arch widths, arch perimeters, arch lengths, palatal depths, and posterior tooth inclinations. Blinding was used only during outcome assessment. The chi-square test was used to compare the sex ratios between groups (P <0.05). Intergroup comparisons were performed using independent t tests with the Bonferroni correction for multiple tests. Results Fifty patients were recruited and analyzed in their respective groups. The experimental group comprised 25 patients (mean age, 8.8 years), and the control group comprised 25 patients (mean age, 8.6 years). No intergroup significant differences were found for age, sex ratio, and dentoskeletal variables before expansion. No significant differences were found between the EDO and the hyrax expander groups regarding skeletal changes. The EDO promoted significantly

Perpendicular serial maxillary distraction osteogenesis in cleft lip and palate patients.

Science.gov (United States)

Ylikontiola, Leena P; Sándor, George K; Harila, Virpi

2015-01-01

Cleft lip and palate patients often have a retruded maxilla with a severely narrowed deficient maxillary arch. This report aims to describe the management of severe maxillary retrusion and constriction in cleft lip and palate patients using distraction osteogenesis applied in serial sequence in two directions perpendicular to each other. Two adult male cleft lip and palate patients were treated with maxillary distraction osteogenesis in two stages. In the first stage, surgically assisted rapid palatal expansion with a tooth-borne device was performed to significantly expand the maxillary arch in the transverse dimension. After the teeth were orthodontically aligned, the horizontal distraction of the maxilla was made by two internal maxillary distraction devices. In the first patient, the maxilla was initially widened by 11 mm and then distracted forward by 20 mm. Despite the breakage of the shaft of one of the two distractors at the end of distraction, a satisfactory occlusion was found at the time of distractor device removal. The maxillary position has remained stable through 8 years of follow-up. In the second patient, the palate was widened by 14 mm and the maxilla was distracted forward by 22 mm. The maxillary position has remained stable through 3 years of follow-up. Sequential serial distraction of maxilla in two planes perpendicular to each other is a safe and stable approach for the treatment of cleft lip and palate patients with severe transverse and anteroposterior discrepancies.

Terminal Posterior Tilted Implants Planned as a Sinus Graft Alternative for Fixed Full-Arch Implant-Supported Maxillary Restoration: A Case Series with 10- to 19-Year Results on 44 Consecutive Patients Presenting for Routine Maintenance.

Science.gov (United States)

Fortin, Yvan; Sullivan, Richard M

2017-02-01

Posterior maxillary tilted implants are gaining prevalence as an alternative to sinus grafts supporting fixed maxillary restorations. This paper reports long-term results after loading using this technique. Consecutive patients presenting for either routine hygiene maintenance or unplanned emergency care who had received tilted implants as a sinus graft alternative to support fixed fully implant-supported restoration of an edentulous maxilla and were followed for a minimum of 10 years from initial implant placement were included in this evaluation. Forty-four patients were identified: 40 with bilateral tilted implants and 4 with one tilted and one axial posterior implant. Eight patients received one-piece fixed porcelain-to-gold screw-retained restorations, and thirty-six patients received a fully implant-supported patient-removable Marius Bridge. Seventy-nine out of 84 originally loaded posterior tilted implants survived a minimum of 10 years loading; one tilted implant was lost at 10 years. Eight additional posterior implants were placed for either these lost tilted posterior implants or as proactive supplemental support; one of these replacement tilted implants survived for at least 10 years and is included in the data. All patients have maintained continuous fixed function throughout the follow-up period. Forty-one out of 44 patients continue with the original restoration, 33 without modification or removal of the fixed restoration or implant-connecting bar. One porcelain-to-gold and seven Marius Bridges had framework modifications to accommodate additional implants; 3 Marius Bridge restorations were replaced with a newer generation. Within the limits of this retrospective study, the results show that continuous fixed function of fully implant-supported maxillary restorations using posterior tilted implants in terminal positions of support as a sinus graft alternative combined with axial anterior implants is possible over a prolonged period. Loss of a posterior

Impact of beta thalassemia on maxillary sinuses and sino-nasal passages: A case control study.

Science.gov (United States)

Ragab, Ahmed; Ragab, Seham Mohammed; Shawki, Mohammed

2015-12-01

Skeletal changes among beta (β) thalassemia children are well documented, but without available data regarding sino-nasal passages alterations. The authors investigated the maxillary sinuses and sino-nasal passages changes in β-thalassemia children and correlated such changes with the amount of transfused red cells and the erythroid marrow activity. Clinical analyses including otorhinolaryngical examination (ORL) were obtained in twenty β-thalassemia children and 20 matched healthy controls. Hemoglobin (Hb), serum ferritin, soluble transferrin receptor (sTfR) levels and bone mineral density of the lumbar spine (BMD ls) were assayed. The two groups were analyzed for the CT image parameters: bone thickness, anterior and posterior choanae diameters, extramedullary hematopoiesis and chronic rhinosinusitis (CRS) RESULTS: Nasal congestion/obstruction was identified in 14 (70%) children. Eight patients (40%) had criteria of chronic rhinosinusitis. In comparison with the normal controls, the increase in the roof, floor, medial, anterior, lateral and posterior maxillary bony walls thickness was significantly higher (1.26, 2.46, 2.6, 2.9, 3.23 and 5.34-folds, respectively). The mean posterior choanae horizontal, vertical diameters and their surface area were significantly reduced in the patients compared to the controls. The mean anterior maxillary wall bone thickness directly correlated with sTfR (P=0.047) while that of the posterior wall correlated inversely with Hb level (P=0.013). The mean vertical posterior choanae diameter had positive correlation with the amount of transfused red cells (P=0.001) and negative correlation with sTfR (P=0.001). The Hounsfield unit of maxillary sinus wall had direct relation with BMDls (P=0.003) CONCLUSIONS: Thalassemia children are at risk of different folds increase of maxillary sinuses walls thicknesses utmost at posterior and lateral walls. Other sino-nasal morbidities include diminished posterior choanal diameter, nasal obstruction

Breakage of internal maxillary distractor: considerable complication of maxillary distraction osteogenesis.

Science.gov (United States)

Aikawa, Tomonao; Iida, Seiji; Isomura, Emiko T; Namikawa, Mari; Matsuoka, Yudai; Yamada, Chiaki; Yamamoto, Taku; Takigawa, Yoko

2008-07-01

Maxillary distraction osteogenesis using intraoral distractors is now one of the standard treatments of maxillary retrusion. This report shows 2 cases of breakage of this internal maxillary distractor in patients with cleft lip and palate; one was observed during the distraction period and the other was during the retention period. The first case required a rotational movement of the distraction segment, and this movement caused the laterally dislocation of the posterior part of the distractor, where the distractor suffered some mechanical forces by mouth opening. In the latter case, breakage of distractor was observed on the radiographs taken 3 months after distraction and this complication may have been caused by mechanical force by occlusion and mastication. Both breakages were found at the joint of the anchorage plate and the extension rod, which has some flexibility for adjusting the plate to the bone surface. Therefore, surgeons should pay special attention for this mechanical weak area in this distractor not only during the advancement period, but also during the retention period and should avoid unnecessary frequent bending for adopting the bone surface, which directly weakens the joint.

Corticotomy-assisted orthodontic camouflage in a class III adult patient with a severe transverse discrepancy.

Science.gov (United States)

Gracco, Antonio; Finotti, Marco; Bruno, Giovanni; de Stefani, Alberto

2018-04-06

A 25-year-old man presented with a maxillary transverse discrepancy, posterior cross bite, anterior open bite, molar and canine class III. Treatment included a corticotomy in the upper lateral and posterior teeth, a palatal expansor and a sectional archwire to assist the expansion. The following treatment phase included bonding with Incognito System lingual appliance, interproximal reduction to solve the crowding and bite blocks to control the verticality. Two months after the bonding intermaxillary class III elastics were used to solve the sagittal discrepancy and eight months after the bonding vertical elastics were used in order to solve the anterior open bite until the end of the treatment. A Boston splint was applied for the upper arch, an essix splint was applied for the lower arch. The patient compliance was an essential aspect in the success of the orthodontic treatment. Copyright © 2018. Published by Elsevier Masson SAS.

Three-dimensional prospective evaluation of tooth-borne and bone-borne surgically assisted rapid maxillary expansion

NARCIS (Netherlands)

Nada, R.M.; Fudalej, P.S.; Maal, T.J.J.; Berge, S.J.; Mostafa, Y.A.; Kuijpers-Jagtman, A.M.

2012-01-01

AIM: To three-dimensionally (3D) assess the long-term effects of tooth-borne and bone-borne surgically assisted rapid maxillary expansion (SARME). SUBJECTS AND METHODS: This prospective cohort study comprised 45 consecutive skeletally mature non-syndromic patients with transverse maxillary

Biomechanical analysis of the fixation systems for anterior column and posterior hemi-transverse acetabular fractures.

Science.gov (United States)

Lei, Jianyin; Dong, Pengfei; Li, Zhiqiang; Zhu, Feng; Wang, Zhihua; Cai, Xianhua

2017-05-01

The aim of this study was to evaluate the biomechanical properties of common fixation systems for complex acetabular fractures. A finite element (FE) pelvic model with anterior column and posterior hemi-transverse acetabular fractures was created. Three common fixation systems were used to fix the posterior wall acetabular fractures: 1. Anterior column plate combined with posterior column screws (group I), 2. Anterior column plate combined with quadrilateral area screws (group II) and 3. Double-column plates (group III). And 600 N, representing the body weight, was loaded on the upper surface of the sacrum to simulate the double-limb stance. The amounts of total and relative displacements were compared between the groups. The total amount of displacement was 2.76 mm in group II, 2.81 mm in group III, and 2.83 mm in group I. The amount of relative displacement was 0.0078 mm in group II, 0.0093 mm in group III and 0.014 mm in group I. Our results suggested that all fixation systems enhance biomechanical stability significantly. Anterior column plate combined with quadrilateral area screws has quite comparable results to double column plates, they were superior to anterior column plate combined with posterior screws. Copyright © 2017 Turkish Association of Orthopaedics and Traumatology. Production and hosting by Elsevier B.V. All rights reserved.

Dentofacial transverse development in Koreans according to skeletal maturation: A cross-sectional study.

Science.gov (United States)

Hwang, Soonshin; Noh, Yoonjeong; Choi, Yoon Jeong; Chung, Chooryung; Lee, Hye Sun; Kim, Kyung-Ho

2018-01-01

The aim of this study was to establish the normative data of dentofacial transverse dimensions according to the skeletal maturation stage in Korean adolescents with good occlusion, assess gender differences and determine correlations between transverse variables. A total of 577 Korean subjects between ages 7 to 19 years and exhibiting skeletal Class I occlusion were categorized by skeletal maturation index (SMI) of Fishman using hand-wrist radiographs. Dentofacial transverse dimensions were assessed using posteroanterior cephalograms. Independent two-sample t -tests were used to analyze differences between genders. Pearson correlation coefficient was used to determine the correlation between transverse measurements. Dentofacial transverse norms relevant to skeletal maturation stages were established. The average maxillomandibular width difference and ratio at growth completion was 22.16 mm and 77.01% for males; 23.70 mm and 74.06% for females, respectively. Males had greater facial, maxillary and mandibular widths compared to females at every SMI stage. The maxillary and mandibular intermolar widths showed the strongest correlation for both sexes (r = 0.826 for males, r = 0.725 for females). Dentofacial transverse norms of Korean adolescents were established according to developmental stage. All dentofacial widths were greater in males at growth completion. Maxillary and mandibular intermolar widths were strongly correlated. This study may serve as a guideline for the assessment of dentofacial transverse growth according to skeletal maturation stage in Korean adolescents with good occlusion.

Transverse development of the human jaws between the ages of 8.5 and 15.5 years, studied longitudinally with use of implants.

Science.gov (United States)

Korn, E L; Baumrind, S

1990-06-01

We report longitudinal data on the transverse widening of the maxilla and mandible from a sample of normal subjects (11 males and 20 females) with metallic implants of the Bjork type. Data were from measurements on lateral and frontal (posterior-anterior) cephalograms generated at annual intervals between the ages of 8.5 and 15.5 years (although data were not available for all subjects at all time points). The maxillary data were, in general, similar to those reported by Bjork and Skieller (1974, 1977) for a smaller sample of slightly younger boys. During the age interval studied, transverse widening was greater in the more posterior part of the palate. [The mean annual rate of change in the posterior-most (zygomatic) region was 0.43 mm, sd = 0.18 mm; p less than 0.001.] Although the rate of palatal widening was not large in absolute terms, widening appeared to continue throughout the age interval under study, and there was no evidence to support the conventionally accepted idea that palatal growth in the transverse dimension tapers off substantially or even ceases during the age interval under observation. Evidence of statistically significant widening of the mandibular arch by means of transverse rotation of the osseous matrix was noted in nine of the 29 subjects for whom three-dimensional mandibular information was available. For these nine subjects, the estimated annual increase in mandibular arch angle ranged from 0.52 degrees to 1.40 degrees. As far as we are aware, this is the first report of mandibular matrix rotation in the transverse direction from a sample of subjects with metallic implants. The finding that spontaneous changes in this dimension are relatively common raises the possibility that classical attitudes concerning the immutability of osseous relationships in the symphyseal region during growth may be inappropriate.

Evaluation of mandibular condyles in children with unilateral posterior crossbite.

Science.gov (United States)

Illipronti-Filho, Edson; Fantini, Solange Mongelli de; Chilvarquer, Israel

2015-01-01

The relationship of mandibular condyle dimensions and its association with unilateral posterior crossbite (UPXB) has been suggested in the literature. The purpose of this prospective study was to evaluate mandibular condyles on the left and right sides and between crossed and non-crossed sides in the sagittal and coronal planes, using cone-beam computed tomography (CBCT). Twenty CBCT images of 40 temporo mandibular joints (TMJs) in individuals in mixed dentition phase, which included 9 males (mean 7.9 years) and 11 females (mean 8.2 years), with unilateral posterior crossbite without premature contacts and functional mandibular shifts and with transverse maxillary deficiency. The criteria for sample exclusion included the presence of painful symptoms, facial trauma history, systemic diseases such as juvenile rheumatoid arthritis, mouth opening limitation (anomalies, and skeletal asymmetries that may result in TMJ disorders. Dimensional measurements of the condyles between the right and left sides and crossed and non-crossed sides in sagittal and coronal view were made. There was no significant difference between the measurements of the crossed and non-crossed sides in both sagittal and coronal view. These findings suggest that the presence of unilateral posterior crossbite in children with UPXB did not result in changes between the mandibular condyles in the right and left sides or between the crossed and non-crossed sides in the coronal or sagittal plane.

Volumetric changes of the nose and nasal airway 2 years after tooth-borne and bone-borne surgically assisted rapid maxillary expansion

NARCIS (Netherlands)

Nada, R.M.; Loon, B. van; Schols, J.G.J.H.; Maal, T.J.J.; Koning, M.J.J. de; Mostafa, Y.A.; Kuijpers-Jagtman, A.M.

2013-01-01

This study aimed to assess the effects of bone-borne and tooth-borne surgically assisted rapid maxillary expansion on the volumes of the nose and nasal airway 2 yr after maxillary expansion. This prospective cohort study included 32 patients with transverse maxillary hypoplasia. Expansion was

Uncontrolled Epistaxis Secondary to Traumatic Pseudoaneurysm of the Maxillary Artery

Directory of Open Access Journals (Sweden)

Eelam Adil

2011-01-01

Full Text Available We describe a rare case of traumatic pseudoaneurysm of the maxillary artery following a fall. The patient presented with epistaxis that could not be controlled with anterior and posterior nasal packing. She was urgently taken to the angiography suite for evaluation and ultimately underwent embolization of a left maxillary artery pseudoaneurysm with 500–700 micron Contour PVA followed by coiling with two 3 mm Tornado coils. Bleeding subsided after embolization, and the patient suffered no neurologic sequelae.

Mandibular Flexure in Anterior-Posterior and Transverse Plane on Edentulous Patients in Mashhad Faculty of Dentistry

Directory of Open Access Journals (Sweden)

Azam Sadat Madani

2013-01-01

Full Text Available Introduction: Angle and internal position of lateral pterygoid muscle leads to contraction over two half of the mandible in maximum opening and protrusion position so it can affects impression prosthetic procedures. The aim of this study was to evaluate the mandibular flexure in two transverse and antro-posterior dimensions. Methods: Seventy edentulous patients at Mashhad Faculty of Dentistry as the main group and 50 dentulous patients as the control group were selected. In these patients, transverse dimensions between second molar areas and also canine eminence from one side to another side, and longitudinal dimensions based on the distance between canine to second molar area at centric occlusion and maximum mouth opening were measured. Dimensional differences as the mandibular flexure were measured. Results: The mandibular dimensions in maximum opening and closed mouth were different. Average reduction in transverse dimension on second molar region at maximum mouth opening and closing position were almost equal to -0.0787 mm for target group and 0.7512 mm for control group. On anterior side, averages of these changes were equal to 0.3069 mm for target group and were 0.2254 mm for control group. Conclusion: Transverse dimensions in anterior region at maximum opening position are smaller than the same dimension at closed mouth in edentulous and dentulous patients.

Preoperative Cleft Lip Measurements and Maxillary Growth in Patients With Unilateral Cleft Lip and Palate.

Science.gov (United States)

Antonarakis, Gregory S; Tompson, Bryan D; Fisher, David M

2016-11-01

Maxillary growth in patients with cleft lip and palate is highly variable. The authors' aim was to investigate associations between preoperative cleft lip measurements and maxillary growth determined cephalometrically in patients with complete unilateral cleft lip and palate (cUCLP). Retrospective cross-sectional study. Children with cUCLP. Preoperative cleft lip measurements were made at the time of primary cheiloplasty and available for each patient. Maxillary growth was evaluated on lateral cephalometric radiographs taken prior to any orthodontic treatment and alveolar bone grafting (8.5 ± 0.7 years). The presence of associations between preoperative cleft lip measurements and cephalometric measures of maxillary growth was determined using regression analyses. In the 58 patients included in the study, the cleft lateral lip element was deficient in height in 90% and in transverse width in 81% of patients. There was an inverse correlation between cleft lateral lip height and transverse width with a β coefficient of -0.382 (P = .003). Patients with a more deficient cleft lateral lip height displayed a shorter maxillary length (β coefficient = 0.336; P = .010), a less protruded maxilla (β coefficient = .334; P = .008), and a shorter anterior maxillary height (β coefficient = 0.306; P = .020) than those with a less deficient cleft lateral lip height. Patients with cUCLP present with varying degrees of lateral lip hypoplasia. Preoperative measures of lateral lip deficiency are related to later observed deficiencies of maxillary length, protrusion, and height.

Retrospective radiographic study of marginal bone changes of 88 implants placed with split crest technique in the maxillary latero-posterior area

Directory of Open Access Journals (Sweden)

S. Longoni

2016-04-01

Full Text Available Aim This article presents a retrospective study on the behavior of implants placed with split crest technique in lateroposterior maxillary class IV atrophy. Materials and Methods Subjects who underwent implant placement following split crest technique in the maxillary latero-posterior area were enrolled in the present retrospective study. After a mean period of 6.2 years of function implant survival and success rates were assessed. Moreover, radiographic examination was made on digital periapical radiographs and by means of a specific software. Bone level changes were measured as the difference between the peri-implants crestal bone level and the implants shoulder during the last patient’s visit recall examination. Results A total of 30 patients satisfied the inclusion criteria and were included in the study; the subjects were treated with 88 implants (64 transmucosal and 24 submerged. The observation period for all patients treated with split crest technique varied between 4 and 8 years (mean 6.2 years. The implants survival rate was 96.6% and the prostheses survival rate was 100%. Bone resorption ranged between 2.3 mm and 2.7 mm. Conclusion Implants inserted in conjunction with split crest technique seems to be a promising therapy with similar results as conventional implant surgery.

Canal pattern in mesiobuccal root of maxillary molars of Nigerians ...

African Journals Online (AJOL)

planed maxillary first and second molars respectively were sectioned transversely at three different points corresponding to the cemento-enamel junction, the peak of the external outline of the furcation and the margin of the middle and apical thirds ...

Relationship between conductive hearing loss and maxillary constriction.

Science.gov (United States)

Peyvandi, A A; Jamilian, A; Moradi, E

2014-09-01

To evaluate the relationship between conductive hearing loss and maxillary constriction. A total of 120 people, aged from 7 to 40 years, who were referred to an audiologist when taking out health insurance or for school pre-registration check-up, were selected for this study. A total of 60 participants who had hearing threshold levels greater than 15 dB in both ears were chosen as the conductive hearing loss group. The remaining 60, with normal hearing thresholds of less than 15 dB, were used as the control group. All participants were referred to an orthodontic clinic. Participants who had a posterior crossbite and high palatal vault were considered to suffer from maxillary constriction. There were no significant differences between the sex ratios and mean ages of the groups. However, participants with conductive hearing loss were 3.5 times more likely than controls to suffer from maxillary constriction. Patients who suffer from conductive hearing loss are likely to show a maxillary abnormality when examined by an orthodontist.

Rapid maxillary expansion in contemporary orthodontic literature

Directory of Open Access Journals (Sweden)

Sabrina Mutinelli

2016-01-01

Full Text Available We have reviewed our retrospective research about rapid maxillary expansion performed in the early mixed dentition to summarize the results of different studies regarding maxillary dental arch width variation and crowding improvement in light of contemporary literature. The aim is to define the effects of treatments followed until the end of dental arch growth. In all studies, a Haas expander anchored to the deciduous dentition was used. The samples consisted of treated patients with and without a lateral crossbite and homogeneous untreated individuals as controls. Two additional control groups of adolescents and adults in dental Class 1 were also compared. As a result of the analysis, rapid maxillary expansion with anchorage to the deciduous dentition was found to be effective in increasing transverse width in intermolar and intercanine areas, and the change was preserved until the full permanent dentition stage. When performed before maxillary lateral incisors have fully erupted, this procedure allows for a rapid increase in the arch length in the anterior area and consequently, in the space available for permanent incisors with a stable reduction in crowding over time.

Maxillary Tuberosity Reconstruction with Transport Distraction Osteogenesis

Directory of Open Access Journals (Sweden)

F. Ugurlu

2012-01-01

Full Text Available Severe bone loss due to pathology in the maxillary tuberosity region is a challenging problem both surgically and prosthetically. Large bone grafts have a poor survival rate due to the delicate bony architecture in this area and presence of the maxillary sinus. Our case presentation describes a new technique for reconstructing severe bony defect in the maxillary tuberosity with horizontal distraction osteogenesis in a 45-year-old man. A 4×6×3cm cyst was discovered in the left maxillary molar region and enucleated. Three months postoperatively, the area had a severe bone defect extending to the zygomatic buttress superiorly and hamular notch posteriorly. Three months later, a bone segment including the right upper second premolar was osteotomised and distracted horizontally. The bone segment was distracted 15 mm distally. After consolidation, implants were placed when the distractor was removed. A fixed denture was loaded over the implants after 3 months. Complete alveolar bone loss extending to the cranial base can be reconstructed with transport distraction osteogenesis. Distalisation of the alveolar bone segment adjacent to the bony defect is an easy method for reconstructing such severe defects.

Case report: Management of severe posterior open bite due to primary failure of eruption.

LENUS (Irish Health Repository)

Mc Cafferty, J

2010-06-01

Primary failure of tooth eruption (PFE) is a rare condition affecting any or all posterior quadrants. Unilateral involvement of maxillary and mandibular quadrants causes a dramatic posterior open bite that requires complex management strategies.

Impact of rapid maxillary expansion on nasomaxillary complex volume in mouth-breathers

Directory of Open Access Journals (Sweden)

Mario Cappellette Jr.

Full Text Available ABSTRACT Objective: To assess the volumetric changes that occur in the nasomaxillary complex of mouth-breathing patients with transverse maxillary deficiency subjected to rapid maxillary expansion (RME. Methods: This was a controlled, prospective intervention study involving 38 mouth-breathing patients presenting with transverse maxillary deficiency, regardless of malocclusion type or race. Twenty-three of them comprised the experimental group, which was composed of 11 (47.8% boys, and 12 (52.2% girls, with a mean age of 9.6 years, ranging from 6.4 to 14.2 years and standard deviation of 2.3 years; and 15 of them comprised the control group, composed of 9 (60% boys and 6 (40% girls with an mean age of 10.5 years, ranging from 8.0 to 13.6 years, and standard deviation of 1.9 years. All patients were scanned (CT according to a standard protocol: Initial CT (T1, and CT three months thereafter (T2, and the patients in the experimental group were treated with RME using a Hyrax expander for the correction of maxillary deficiency during the T1-T2 interval. The CT scans were manipulated using Dolphin® Imaging version 11.7 software for total and partial volumetric assessment of the nasomaxillary complex. Results: The results revealed that in the experimental group there was a significant increase in the size of the structures of interest compared to the control group, both in general aspect and in specific regions. Conclusions: Rapid maxillary expansion (RME provided a significant expansion in all the structures of the nasomaxillary complex (nasal cavity, oropharynx, right and left maxillary sinuses.

CT scan for the diagnosis of maxillary sinus carcinoma

International Nuclear Information System (INIS)

Kimura, Yo; Kato, Isao; Aoyagi, Masaru; Kikuchi, Akira; Koike, Yoshio; Suzuki, Hachiro.

1984-01-01

A comparative study between the conventional radiological examination and the computed tomographical examination for the diagnosis of maxillary sinus carcinoma was done. CT scan has been more appreciated to detect the tumor invasion in the pterygopalatine fossa, orbit, posterior ethmoid sinus and skull base than the conventional examination. CT scan was most usefull for the determination of size and location of the tumor. The prognosis by the stage-grouping was significantly separated by the new classification with CT scan. Therefore, new TNM classification of maxillary sinus carcinoma with CT scan should be taken into account. (author)

Evaluation of mandibular condyles in children with unilateral posterior crossbite

Directory of Open Access Journals (Sweden)

Edson ILLIPRONTI-FILHO

2015-01-01

Full Text Available The relationship of mandibular condyle dimensions and its association with unilateral posterior crossbite (UPXB has been suggested in the literature. The purpose of this prospective study was to evaluate mandibular condyles on the left and right sides and between crossed and non-crossed sides in the sagittal and coronal planes, using cone-beam computed tomography (CBCT. Twenty CBCT images of 40 temporo mandibular joints (TMJs in individuals in mixed dentition phase, which included 9 males (mean 7.9 years and 11 females (mean 8.2 years, with unilateral posterior crossbite without premature contacts and functional mandibular shifts and with transverse maxillary deficiency. The criteria for sample exclusion included the presence of painful symptoms, facial trauma history, systemic diseases such as juvenile rheumatoid arthritis, mouth opening limitation (< 40 mm, congenital or genetic anomalies, and skeletal asymmetries that may result in TMJ disorders. Dimensional measurements of the condyles between the right and left sides and crossed and non-crossed sides in sagittal and coronal view were made. There was no significant difference between the measurements of the crossed and non-crossed sides in both sagittal and coronal view. These findings suggest that the presence of unilateral posterior crossbite in children with UPXB did not result in changes between the mandibular condyles in the right and left sides or between the crossed and non-crossed sides in the coronal or sagittal plane.

Calcifying epithelial odontogenic tumor of the posterior maxilla

Directory of Open Access Journals (Sweden)

Vidya Ajila

2016-01-01

Full Text Available Calcifying epithelial odontogenic tumor (CEOT is a rare odontogenic neoplasm comprising <1% of all odontogenic tumors. It is commonly seen in the third to fifth decades of life without any gender predilection. It usually occurs in the mandibular posterior region. A painless, slow growing swelling with bone expansion is the most common clinical feature of CEOT. Radiographically, it presents as a mixed lesion with or without an associated impacted tooth. Confirmation of the diagnosis is by histopathological examination. We describe an unusual case of CEOT occurring in the maxillary posterior region and involving the maxillary sinus. The associated impacted third molar was displaced to the lateral wall of the nose and root resorption was seen in all the teeth associated with the lesion. There was no evidence of calcification in conventional as well as computed tomography images.

Posterior atlantoaxial dislocation without odontoid fracture

International Nuclear Information System (INIS)

Chaudhary, Reema; Raut, Abhijit; Chaudhary, Kshitij; Metkar, Umesh; Rathod, Ashok; Sanghvi, Darshana

2008-01-01

We report a case of posterior atlantoaxial dislocation without a fracture of the odontoid in a 35-year-old woman. There have been nine reported cases of similar injury in the English literature. The integrity of the transverse ligament following posterior atlantoaxial dislocations has not been well documented in these reports. In the present case, MRI revealed an intact transverse ligament, which probably contributed to the stability of the C1-C2 complex following closed reduction. (orig.)

Long-term space changes after premature loss of a primary maxillary first molar

Directory of Open Access Journals (Sweden)

Yng-Tzer J. Lin

2017-03-01

Conclusion: The anterior and posterior arch dimensions significantly increased 81 months after premature loss of a primary maxillary first molar, which suggested that space maintainers were not needed in these cases.

Treatment of Severe Maxillary Hypoplasia With Combined Orthodontics and Distraction Osteogenesis.

Science.gov (United States)

Lucchese, Alessandra; Albertini, Paolo; Asperio, Paolo; Manuelli, Maurizio; Gastaldi, Giorgio

2018-01-05

Distraction osteogenesis (DO) is a technique that allows the generation of new bone in a gap between 2 vascularized bone surfaces in response to the application of graduated tensile stress across the bone gap.Distraction osteogenesis has become a routine treatment of choice to correct skeletal deformities and severe bone defects in the craniofacial complex over the past decade. Distraction osteogenesis has been successfully chosen in lengthening the maxilla and the mandible; in the maxilla and recently in the mandible, the jawbones have been distracted and widened transversely to relieve severe anterior dental crowding and transverse discrepancies between the dental arches.Distraction osteogenesis for maxillary advancement started in 1993 and is now widely used, especially in patients with skeletal Class III malocclusion caused by maxillary hypoplasia.The aim of this study was to present the efficiency of combined orthodontic and DO in the severe maxillary hypoplasia.A 35-year-old Italian man presented to our clinical practice with the chief complaint of esthetic and functionally problems because of skeletal Class III malocclusion with anterior crossbite.Considering that the severity of the skeletal discrepancy is remarkable but compensated by the DO potential, the combined orthodontic and DO treatment was considered adequate, like less invasive and equally effective.It was obtained a good alignment with the upper and lower arch dental alveolar maxillary advancement that allowed to correct the sagittal relationships.The patient was satisfied for the treatment results and had considerable improvement in his self-esteem.

Distraction Osteogenesis Maxillary Expansion (DOME) for Adult Obstructive Sleep Apnea Patients with High Arched Palate.

Science.gov (United States)

Liu, Stanley Yung-Chuan; Guilleminault, Christian; Huon, Leh-Kiong; Yoon, Audrey

2017-08-01

A narrow maxilla with high arched palate characterizes a phenotype of obstructive sleep apnea (OSA) patients that is associated with increased nasal resistance and posterior tongue displacement. Current maxillary expansion techniques for adults are designed to correct dentofacial deformity. We describe distraction osteogenesis maxillary expansion (DOME) tailored to adult patients with OSA with narrow nasal floor and high arched palate without soft tissue redundancy. DOME is performed with placement of maxillary expanders secured by mini-implants along the midpalatal suture. This minimizes the maxillary osteotomies necessary to re-create sutural separation for reliable expansion at the nasal floor and palatal vault. We report the safety and efficacy profile of the first 20 patients at Stanford who underwent DOME.

Unilateral maxillary molar distalization with zygoma-gear appliance.

Science.gov (United States)

Kilkis, Dogan; Bayram, Mehmet; Celikoglu, Mevlut; Nur, Metin

2012-08-01

The aim of this study was to present the orthodontic treatment of a 15-year-old boy with a unilateral maxillary molar distalization system, called the zygoma-gear appliance. It consisted of a zygomatic anchorage miniplate, an inner bow, and a Sentalloy closed coil spring (GAC International, Bohemia, NY). A distalizing force of 350 g was used during the distalization period. The unilateral Class II malocclusion was corrected in 5 months with the zygoma-gear appliance. The maxillary left first molar showed distalization of 4 mm with an inclination of 3°. The maxillary premolars moved distally with the help of the transseptal fibers. In addition, there were slight decreases in overjet (-0.5 mm) and maxillary incisor inclination (-1°), indicating no anchorage loss from the zygoma-gear appliance. Preadjusted fixed appliances (0.022 × 0.028-in, MBT system; 3M Unitek, Monrovia, Calif) were placed in both arches to achieve leveling and alignment. After 14 months of unilateral distalization with the zygoma-gear appliance and fixed appliances, Class I molar and canine relationships were established with satisfactory interdigitation of the posterior teeth. Acceptable overjet and overbite were also achieved. This article shows that this new system, the zygoma-gear appliance, can be used for unilateral maxillary molar distalization without anchorage loss. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

eRME - Rapid Maxillary Expansion in the economic way

Directory of Open Access Journals (Sweden)

Sonali Mahadevia

2011-01-01

Full Text Available Aim and Objectives: Rapid Maxillary Expansion constitutes a routine clinical procedure in orthodontics, involving separation of mid-palatine suture which is usually done with help of the Hyrax screw. However, because of its high cost, the use has been limited, especially in institutions. So, the purpose of this study was to construct an economical device which can expand the maxillary arch in growing patients. Materials and Methods: Six patients having constricted maxilla and posterior skeletal crossbite were randomly selected from the Department of Orthodontics. A unique, easy and simple alternative device for expanding the maxillary arch called economic Rapid Maxillary Expander (eRME has been fabricated at about one-tenth the cost of the conventional Hyrax. Pre- and post-treatment effects were statistically tested by using paired t-test at 0.05 level of significance. Results and Conclusion: The study results showed an average expansion in canine, premolar and molar regions of 4.4 mm, 6.8 mm and 9.4 mm, respectively, having significant difference pre-and post-treatment. Thus, it shows that maxillary expansion is efficiently possible with the application of this newly constructed device named eRME. This appliance also acts as a fixed retainer to avoid relapse, hence negating the need for a separate retainer.

A cone-beam computed tomography evaluation of buccal bone thickness following maxillary expansion

Energy Technology Data Exchange (ETDEWEB)

Akyalcin, Sercan; Englih, Jeryl D.; Stephens, Claude R.; Winkelmann, Sam [Dept. of Orthodontics, School of Dentistry, University of Texas Health Science Center at Houston, Houston (United States); Schaefer, Jeffrey S. [Todd Hughes Orthodontics, Houston (United States)

2013-06-15

This study was performed to determine the buccal alveolar bone thickness following rapid maxillary expansion (RME) using cone-beam computed tomography (CBCT). Twenty-four individuals (15 females, 9 males; 13.9 years) that underwent RME therapy were included. Each patient had CBCT images available before (T1), after (T2), and 2 to 3 years after (T3) maxillary expansion therapy. Coronal multiplanar reconstruction images were used to measure the linear transverse dimensions, inclinations of teeth, and thickness of the buccal alveolar bone. One-way ANOVA analysis was used to compare the changes between the three times of imaging. Pairwise comparisons were made with the Bonferroni method. The level of significance was established at p<0.05. The mean changes between the points in time yielded significant differences for both molar and premolar transverse measurements between T1 and T2 (p<0.05) and between T1 and T3 (p<0.05). When evaluating the effect of maxillary expansion on the amount of buccal alveolar bone, a decrease between T1 and T2 and an increase between T2 and T3 were found in the buccal bone thickness of both the maxillary first premolars and maxillary first molars. However, these changes were not significant. Similar changes were observed for the angular measurements. RME resulted in non-significant reduction of buccal bone between T1 and T2. These changes were reversible in the long-term with no evident deleterious effects on the alveolar buccal bone.

Effects of the functional regulator III on transversal changes: a postero-anterior cephalometric and model study.

Science.gov (United States)

Kilic, Nihat; Celikoglu, Mevlüt; Oktay, Hüsamettin

2011-12-01

Studies assessing the transversal treatment changes caused by the functional regulator III (FR-3) are limited in number. This clinical study was planned to analyse the transversal effects of the FR-3 appliance therapy. The treatment group consisted of 17 patients (8 males and 9 females) with Class III malocclusion, who were treated with the FR-3 appliance. The control group consisted of 17 subjects (7 males and 10 females) with a normal occlusion. Mean ages of the subjects were 10.73 and 10.66 years in the treatment and control groups, respectively. Postero-anterior radiographs and stone casts were obtained before (T1) and after (T2) treatment/observation. The results of the Student's t-test comparing initial values showed that maxillary dentoalveolar and skeletal widths are significantly larger in the control group than those in the treatment group. At the end of the treatment, significant transverse increments occurred only at the dentoalveolar level of the maxilla. The transversal changes in the mandible were not statistically significant. Buccal shields of FR-3 did not stimulate the growth of maxillary apical base but caused an enhanced and supplementary widening of maxillary dental and alveolar structures.

DIRECT USAGE OF MINISCREW ANCHORAGE TO INTRUDE OVERERUPTED MAXILLARY POSTERIOR TEETH BEFORE PROSTHODONTIC PREPARATION:A CASE REPORT

Directory of Open Access Journals (Sweden)

Yasemin Bahar Acar

2016-01-01

Full Text Available Overeruption of maxillary molars due loss of opposing teeth creates occlusal and functional interferences. Before reconstruction can be initiated, intrusion of overerupted molars becomes essential. This report illustrates treatment of overerupted maxillary premolar and molar via direct use of miniscrew anchorage. A 24-year old female had lost first and second left mandibular molars due to pulpal necrotizing agents, resulting with a large alveolar bone defect and overerupted maxillary premolar and molar. She had a history of unsuccessful alveolar distraction of mandibular left premolars to increase the alveolar bone height prior to implant placement. Patient was satisfied with her smile and refused comprehensive orthodontic treatment. Maxillary premolar and molar were intruded segmentally for 4mm in 8 months, using a combination of a mini-implant and partialfixed edgewise appliances. Biological responses of teeth and surrounding bony structures to intrusion appeared normal and acceptable in radiographic and clinical examination.

Evaluation of the rapid and slow maxillary expansion using cone-beam computed tomography: a randomized clinical trial

Directory of Open Access Journals (Sweden)

Juliana da S. Pereira

Full Text Available ABSTRACT OBJECTIVE: The aim of this randomized clinical trial was to evaluate the dental, dentoalveolar, and skeletal changes occurring right after the rapid maxillary expansion (RME and slow maxillary expansion (SME treatment using Haas-type expander. METHODS: All subjects performed cone-beam computed tomography (CBCT before installation of expanders (T1 and right after screw stabilization (T2. Patients who did not follow the research parameters were excluded. The final sample resulted in 21 patients in RME group (mean age of 8.43 years and 16 patients in SME group (mean age of 8.70 years. Based on the skewness and kurtosis statistics, the variables were judged to be normally distributed and paired t-test and student t-test were performed at significance level of 5%. RESULTS: Intermolar angle changed significantly due to treatment and RME showed greater buccal tipping than SME. RME showed significant changes in other four measurements due to treatment: maxilla moved forward and mandible showed backward rotation and, at transversal level both skeletal and dentoalveolar showed significant changes due to maxillary expansion. SME showed significant dentoalveolar changes due to maxillary expansion. CONCLUSIONS: Only intermolar angle showed significant difference between the two modalities of maxillary expansion with greater buccal tipping for RME. Also, RME produced skeletal maxillary expansion and SME did not. Both maxillary expansion modalities were efficient to promote transversal gain at dentoalveolar level. Sagittal and vertical measurements did not show differences between groups, but RME promoted a forward movement of the maxilla and backward rotation of the mandible.

Does Andrews facial analysis predict esthetic sagittal maxillary position?

Science.gov (United States)

Resnick, Cory M; Daniels, Kimberly M; Vlahos, Maryann

2018-04-01

Cephalometric analyses have limited utility in planning maxillary sagittal position for orthognathic surgery. In Six Elements of Orofacial Harmony, Andrews quantified maxillary position relative to forehead projection and angulation and proposed an ideal relationship. The purpose of this study was to investigate the ability of this technique to predict esthetic sagittal maxillary position. Survey study including a male and female with straight facial profiles, normal maxillary incisor angulations, and Angle's Class I. Maxillary position was modified on lateral photographs to create 5 images for each participant with incisor-goal anterior limit line (GALL) distances of -4, -2, 0, +2, and +4 mm. A series of health care professionals and laypeople were asked to rate each photo in order of attractiveness. A total of 100 complete responses were received. Incisor-GALL distances of +4 mm (41%) and +2 mm (40%) were most commonly considered "most esthetic" for the female volunteer (P < .001). For the male volunteer, there were 2 peak "most esthetic" responses: incisor-GALL distances of 0 mm (37%) and -4 mm (32%) (P < .001). Respondents considered maxillary incisor position 2 to 4 mm anterior to GALL most attractive in a woman and 0 to 4 mm posterior to GALL most esthetic in a man. Using these modified target distances, this analysis may be useful for orthognathic surgery planning. Copyright © 2018 Elsevier Inc. All rights reserved.

Relationship of maxillary 3-dimensional posterior occlusal plane to mandibular spatial position and morphology.

Science.gov (United States)

Coro, Jorge C; Velasquez, Roberto L; Coro, Ivette M; Wheeler, Timothy T; McGorray, Susan P; Sato, Sadao

2016-07-01

The purpose of this study was to examine the relationship of the 3-dimensional (3D) posterior occlusal plane (POP) and the mandibular 3D spatial position. The relationship of the POP to mandibular morphology was also investigated. Retrospective data from a convenience sample of pretreatment diagnostic cone-beam computed tomography scans were rendered using InVivo software (Anatomage, San Jose, Calif). The sample consisted of 111 subjects (51 male, 60 female) and included growing and nongrowing subjects of different races and ethnicities. The 3D maxillary POP was defined by selecting the cusp tips of the second premolars and the second molars on the rendered images of the subjects. The angles made by this plane, in reference to the Frankfort horizontal plane, were measured against variables that described the mandibular position in the coronal, sagittal, and axial views. The POP was also compared with bilateral variables that described mandibular morphology. There were significant differences of the POP among the different skeletal malocclusions (P <0.0001). The POP showed significant correlations with mandibular position in the sagittal (P <0.0001), coronal (P <0.05), and axial (P <0.05) planes. The POP also showed a significant correlation with mandibular morphology (P <0.0001). These findings suggest that there is a distinct and significant relationship between the 3D POP and the mandibular spatial position and its morphology. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Dimensions of Velopharyngeal Space following Maxillary Advancement with Le Fort I Osteotomy Compared to Zisser Segmental Osteotomy: A Cephalometric Study

Directory of Open Access Journals (Sweden)

Furkan Erol Karabekmez

2015-01-01

Full Text Available The objectives of this study are to assess the velopharyngeal dimensions using cephalometric variables of the nasopharynx and oropharynx as well as to compare the Le Fort I osteotomy technique to Zisser’s anterior maxillary osteotomy technique based on patients’ outcomes within early and late postoperative follow-ups. 15 patients with severe maxillary deficiency treated with Le Fort I osteotomy and maxillary segmental osteotomy were assessed. Preoperative, early postoperative, and late postoperative follow-up lateral cephalograms, patient histories, and operative reports are reviewed with a focus on defined cephalometric landmarks for assessing velopharyngeal space dimension and maxillary movement (measured for three different tracing points. A significant change was found between preoperative and postoperative lateral cephalometric measurements regarding the distance between the posterior nasal spine and the posterior pharyngeal wall in Le Fort I osteotomy cases. However, no significant difference was found between preoperative and postoperative measurements in maxillary segmental osteotomy cases regarding the same measurements. The velopharyngeal area calculated for the Le Fort I osteotomy group showed a significant difference between the preoperative and postoperative measurements. Le Fort I osteotomy for advancement of upper jaw increases velopharyngeal space. On the other hand, Zisser’s anterior maxillary segmental osteotomy does not alter the dimension of the velopharyngeal space significantly.

Correction of complete maxillary crossbite with severe crowding using Hyrax expansion and fixed appliance.

Science.gov (United States)

Wangsrimongkol, Tasanee; Manosudprasit, Montian; Pisek, Poonsak; Leelasinjaroen, Pornnapha

2013-09-01

An 18-year-old Thai man who presented with a secondary cleft palate, maxillary hypoplasia and severe crowding was treated by rapid maxillary expansion and fixed orthodontic appliances. Initial assessment found skeletal Class III malrelationship and dental Class II malocclusion with anterior and bilateral posterior crossbites. Camouflage orthodontic treatment was planned using a rapid maxillary expansion appliance and correcting crowding with extraction all four premolar teeth. A Hyrax appliance and vertical loop arch wire were placed for maxillary arch expansion of 9.5 mms at first molars and canines, and 5.5 mms at the premolars and obtained positive overjet. Both acceptable skeletal and soft tissue relationships and satisfactory occlusion were produced. After 14 months of postoperative follow-up, the occlusal result was stable and no skeletal reversals could be detected.

Rapid maxillary expansion effects: An alternative assessment method by means of cone-beam tomography

Directory of Open Access Journals (Sweden)

Camilo Aquino Melgaço

2014-10-01

Full Text Available INTRODUCTION: This study aims to develop a method to assess the changes in palatal and lingual cross-sectional areas in patients submitted to rapid maxillary expansion (RME. METHODS: The sample comprised 31 Class I malocclusion individuals submitted to RME and divided into two groups treated with Haas (17 patients and Hyrax (14 patients expanders. Cone-beam computed tomography scans were acquired at T0 (before expansion and T1 (six months after screw stabilization. Maxillary and mandibular cross-sectional areas were assessed at first permanent molars and first premolars regions and compared at T0 and T1. Mandibular occlusal area was also analyzed. RESULTS: Maxillary cross-sectional areas increased in 56.18 mm2 and 44.32 mm2 for the posterior and anterior regions. These values were smaller for the mandible, representing augmentation of 40.32 mm2 and 39.91 mm2 for posterior and anterior sections. No differences were found when comparing both expanders. Mandibular occlusal area increased 43.99mm2 and mandibular incisors proclined. Increments of 1.74 mm and 1.7 mm occurred in mandibular intermolar and interpremolar distances. These same distances presented increments of 5.5 mm and 5.57 mm for the maxillary arch. CONCLUSION: Occlusal and cross-sectional areas increased significantly after RME. The method described seems to be reliable and precise to assess intraoral area changes.

Avaliação da expansão rápida da maxila por meio da tomografia computadorizada: relato de um caso Computed tomography evaluation of rapid maxillary expansion: a case report

Directory of Open Access Journals (Sweden)

Daniela Gamba Garib

2005-08-01

sections with 1-mm thickness were performed parallel to the palatal plane, comprising dentoalveolar and basal areas of maxilla, up to the inferior third of the nasal cavity. Multiplanar reconstruction was employed for achievement of the following measurements by means of the computerized method: maxillary transverse dimensions, posterior teeth inclination, buccal and lingual bone plates thickness, and buccal alveolar crest level. The rapid maxillary expansion yielded a significant transverse increase in all areas measured, of decreasing magnitude from dental arch to basal bone. Posterior teeth were moved in buccal direction, which was associated to both inclination and translation. This orthodontic effect produced a buccal bone plate thickness redution and a lingual bone plate thickness increase. After expansion, bone dehiscences were observed on supporting teeth buccal aspect.

Rehabilitation of Posterior Maxilla with Obturator Supported by Zygomatic Implants

Directory of Open Access Journals (Sweden)

Sankalp Mittal

2018-01-01

Full Text Available Prosthetic rehabilitation of atrophic maxilla and large maxillary defects can be done successfully by zygomatic implant-supported prosthesis. Zygomatic implants are an avant-garde to complex and invasive-free vascularised osteocutaneous flaps, distraction osteogenesis, and the solution to flap failures. A treated case of tuberculous osteomyelitis, with a class II (Aramany’s classification maxillary defect, reported to oral maxillofacial department, Government Dental College (RUHS-CODS. The defect in this group was unilateral, retaining the anterior teeth. The patient was previously rehabilitated with a removable maxillary obturator. Inadequate retention affected essential functions like speaking, mastication, swallowing, esthetics, and so on due to lack of sufficient supporting tissues. A fixed prosthetic rehabilitation of posterior maxillary defect was done with obturator supported with two single-piece zygomatic implants. At 1-year follow-up, the patient was comfortable with the prosthesis, and no further complaints were recorded.

Position and stability of the mandibular incisors after rapid maxillary expansion

Directory of Open Access Journals (Sweden)

Darcy Flávio Nouer

Full Text Available Objective: To make a cephalometric evaluation of the position and stability of the mandibular incisors immediately after rapid maxillaryexpansion and after a containment period of five months. Methods: The sample consisted of 21 schoolchildren, aged between 6 years and 11 months and 11 years, with mixed dentition, posterior reverse articulation (posterior cross bite, and erupted permanent first molars. The children were randomly divided into two groups: Group1 (composed of eleven children, in whom the encapsulated rapid maxilla expander was used, and Group 2 (composed of ten children, inwhom the conventional Hyrax expander was used. Three lateral teleradiographs of each individual were taken: before treatment, after rapid maxillary expansion, and after a containment period of five months. The cephalometric measurements used for analyzing the incisors were: /1.NB, /1-NB, /1-Line I, IMPA and /1-Jr. The data were submitted to the Dalhberg test, to calculate the error of repeatability, and to ANOVA (p<0.05. Results: The result showed significant difference between the adopted mechanics, but showed no difference between the initial measures, those after rapid expansion of the maxilla and final measures for all the distances, except for /1-Jr. Conclusion: Rapid maxillary expansion, using the encapsulated appliance or Hyrax, caused no significant alteration in the distances: /1.NB, /1-NB, /1-Line I, IMPA; before, after rapid maxillary expansion and after containment.

Relapse and stability of surgically assisted rapid maxillary expansion, an anatomical biomechanical study

NARCIS (Netherlands)

Koudstaal, M.J.; Smeets, J.B.J.; Kleinrensink, G.J.; Schulten, A.J.M.; van der Wal, K.G.H.

2009-01-01

Purpose: This anatomic biomechanical study was undertaken to gain insight into the underlining mechanism of tipping of the maxillary segments during transverse expansion using tooth-borne and bone-borne distraction devices. Materials and Methods: An anatomic biomechanical study was performed on 10

Thin-plate spline analysis of the short- and long-term effects of rapid maxillary expansion.

Science.gov (United States)

Franchi, Lorenzo; Baccetti, Tiziano; Cameron, Christopher G; Kutcipal, Elizabeth A; McNamara, James A

2002-04-01

The aim of this study was to investigate the short- and long-term effects induced by rapid maxillary expansion (RME) on the shape of the maxillary and circummaxillary structures by means of thin-plate spline (TPS) analysis. The sample consisted of 42 patients who were compared with a control sample of 20 subjects. The treated subjects underwent Haas-type RME, followed by fixed appliance therapy. Postero-anterior (PA) cephalograms were analysed for each treated subject at T1 (pre-treatment), T2 (immediate post-expansion), and T3 (long-term observation), and were available at T1 and T3 for the control group (CG). The mean age at T1 was 11 years and 10 months for both groups. The mean chronological ages at T3 were 20 years, 6 months for the treated group (TG) and 17 years, 8 months for the control group. The study focused on shape changes in the maxillary, nasal, zygomatic, and orbital regions. TPS analysis revealed significant shape changes in the TG. They consisted of an upward and lateral displacement of the two halves of the naso-maxillary complex as a result of active expansion in the short-term, and normalization of maxillary shape in the transverse dimension in the long-term (the initial transverse deficiency of the maxilla in the treated group was eliminated by RME therapy both in the short- and long-term). At the end of the observation period, the nasal cavities were larger when compared with both their pre-expansion configuration and the final configuration in the controls. RME with the Haas appliance appears to be an efficient therapeutic means to induce permanent favourable changes in the shape of the naso-maxillary complex.

Does hyrax expansion therapy affect maxillary sinus volume? A cone-beam computed tomography report

International Nuclear Information System (INIS)

Darsey, Drew M.; English, Jeryl D.; Ellis, Randy K.; Akyalcin, Sercan; Kau, Chung H

2012-01-01

The aim of this study was to investigate the initial effects of maxillary expansion therapy with Hyrax appliance and to evaluate the related changes in maxillary sinus volume. Thirty patients (20 females, 10 males; 13.8 years) requiring maxillary expansion therapy, as part of their comprehensive orthodontic treatment, were examined. Each patient had cone-beam computed tomography (CBCT) images taken before (T1) and after (T2) maxillary expansion therapy with a banded Hyrax appliance. Multiplanar slices were used to measure linear dimensions and palatal vault angle. Volumetric analysis was used to measure maxillary sinus volumes. Student t tests were used to compare the pre- and post-treatment measurements. Additionally, differences between two age groups were compared with Mann-Whitney U test. The level of significance was set at p=0.05. Comparison of pre-treatment to post-treatment variables revealed significant changes in the transverse dimension related to both maxillary skeletal and dental structures and palatal vault angle, resulting in a widened palatal vault (p<0.05). Hard palate showed no significant movement in the vertical and anteroposterior planes. Nasal cavity width increased on a mean value of 0.93 mm(SD=0.23, p<0.05). Maxillary sinus volume remained virtually stable. No significant age differences were observed in the sample. Hyrax expansion therapy did not have a significant impact on maxillary sinus volume.

Does hyrax expansion therapy affect maxillary sinus volume? A cone-beam computed tomography report

Energy Technology Data Exchange (ETDEWEB)

Darsey, Drew M.; English, Jeryl D.; Ellis, Randy K.; Akyalcin, Sercan [School of Dentistry, University of Texas Health Science Center at Houston, Houston (United States); Kau, Chung H [School of Dentistry, University of Alabama at Birmingham, Birmingham (United States)

2012-06-15

The aim of this study was to investigate the initial effects of maxillary expansion therapy with Hyrax appliance and to evaluate the related changes in maxillary sinus volume. Thirty patients (20 females, 10 males; 13.8 years) requiring maxillary expansion therapy, as part of their comprehensive orthodontic treatment, were examined. Each patient had cone-beam computed tomography (CBCT) images taken before (T1) and after (T2) maxillary expansion therapy with a banded Hyrax appliance. Multiplanar slices were used to measure linear dimensions and palatal vault angle. Volumetric analysis was used to measure maxillary sinus volumes. Student t tests were used to compare the pre- and post-treatment measurements. Additionally, differences between two age groups were compared with Mann-Whitney U test. The level of significance was set at p=0.05. Comparison of pre-treatment to post-treatment variables revealed significant changes in the transverse dimension related to both maxillary skeletal and dental structures and palatal vault angle, resulting in a widened palatal vault (p<0.05). Hard palate showed no significant movement in the vertical and anteroposterior planes. Nasal cavity width increased on a mean value of 0.93 mm(SD=0.23, p<0.05). Maxillary sinus volume remained virtually stable. No significant age differences were observed in the sample. Hyrax expansion therapy did not have a significant impact on maxillary sinus volume.

Interceptive treatment of palatal impaction of maxillary canines with rapid maxillary expansion: a randomized clinical trial.

Science.gov (United States)

Baccetti, Tiziano; Mucedero, Manuela; Leonardi, Maria; Cozza, Paola

2009-11-01

Our aim in this prospective randomized clinical study was to assess the prevalence rate of eruption of palatally displaced canines, diagnosed at an early developmental stage with posteroanterior radiographs and consequently treated by rapid maxillary expansion. A sample of 60 subjects in the early mixed dentition with palatally displaced canines diagnosed on posteroanterior radiographs was enrolled in the trial. Their age range at the first observation (T1) was 7.6 to 9.6 years, with a prepubertal stage of skeletal maturity (CS1 or CS2). The 60 subjects were randomly allocated to the treatment group (TG, 35 subjects) or the no-treatment group (NTG, 25 subjects). The TG was treated with a banded rapid maxillary expander; after expansion, all patients were retained with the expander in place for 6 months. Thereafter, the expander was removed, and the patients wore a retention plate at night for a year. The NTG received no treatment. All subjects were reevaluated in the early permanent dentition (T2) (postpubertal CS4). The number of dropouts was recorded. The main outcome recorded at T2 was successful or unsuccessful eruption of the maxillary permanent canines. The starting forms at T1 for measurements on posteroanterior and panoramic films were compared in the 2 groups with the Mann-Whitney U test (P <0.05). The prevalence rates of successful and unsuccessful treatments in the TG were compared with those in NTG with chi-square tests (P <0.05). From T1 to T2, there were 3 dropouts in each group. The final sample comprised 32 subjects in the TG and 22 subjects in the NTG. No statistically significant differences were found for any variable at T1. The prevalence rates of successful eruption of the maxillary canines were 65.7% (21 subjects) in the TG and 13.6% (3 subjects) in the NTG. The comparison was statistically significant (chi-square = 12.4; P <0.001). Subjects with palatally displaced canines in the early mixed dentition do not have transverse deficiency of the

Narrow- (3.0 mm) Versus Standard-Diameter (4.0 and 4.5 mm) Implants for Splinted Partial Fixed Restoration of Posterior Mandibular and Maxillary Jaws: A 5-Year Retrospective Cohort Study.

Science.gov (United States)

Pieri, Francesco; Forlivesi, Caterina; Caselli, Ernesto; Corinaldesi, Giuseppe

2017-04-01

Evidence concerning predictability of narrow-diameter implants (NDIs) (3.0 mm) and standard-diameter implants (SDIs) (4.0 to 4.5 mm) supporting fixed partial dentures (FPDs) in posterior mandibular and maxillary jaws. All patients treated with at least two adjacent NDIs or SDIs according to available bone thickness and with a minimum follow-up of 5 years after placement were invited to undergo a clinical and radiologic examination. Outcome measures were implant and FPD failures, biologic and prosthetic complications, and marginal bone loss. A total of 107 out of 127 patients attended the examination: 49 (113 implants) of the NDI group, and 58 (126 implants) of the SDI group. Two NDIs failed in one patient versus four SDIs in four patients (P = 0.37). One FPD failed in the NDI group versus two FPDs in the SDI group (P >0.99). Nine biologic complications occurred in the NDI group and twelve in the SDI group (P = 0.81). Twelve prosthetic complications occurred in the NDI group and only two in the SDI group (P = 0.001). Peri-implant marginal bone loss at 5 years was 0.95 ± 0.84 mm for the NDI group and 1.2 ± 0.86 mm for the SDI group (P = 0.06). Five-year data indicate that FPD treatment in posterior mandibular and maxillary jaws with NDIs was as reliable as with SDIs, although NDIs showed a higher risk of prosthetic complications.

Prevalence rate and dentoskeletal features associated with buccally displaced maxillary canines.

Science.gov (United States)

Mucedero, Manuela; Ricchiuti, Maria Rosaria; Cozza, Paola; Baccetti, Tiziano

2013-06-01

The aim of the study was to analyse the prevalence and distribution of buccally displaced canines (BDCs) in subjects scheduled for orthodontic treatment and to investigate the association between BDC and sagittal, vertical, and transverse dentoskeletal relationships. A study sample of 1852 subjects was examined, and it was divided randomly into two groups. A first group of 252 subjects served as control group: the 'reference' prevalence rates for the examined parameters were calculated in this group. The remaining 1600 subjects comprised the sample from which the experimental BDC group was derived. Presence of unilateral or bilateral maxillary BDC, ANB, and SN GOGn angles for sagittal and vertical skeletal relationships, intercanine and intermolar distances, and tooth crowding at the maxillary arch were recorded for each subject. The statistical significance of differences between the BDC and the control groups in transverse relations and tooth crowding at the upper arch was tested by means of independent sample t-tests. Chi-square tests were performed to compare the prevalence rates of BDC and also sagittal and vertical skeletal features in the two groups. The prevalence rate of BDC was 3.06 per cent with a male-to-female ratio of 1:1. BDC subjects exhibited a significant association with hyperdivergent skeletal relationships (38.8%), reduced maxillary intercanine width, and crowding in the upper arch. The presence of specific dentoskeletal characteristics can be considered as a risk indicator for developing a buccal displacement of upper permanent canines.

Evaluation of maxillary arch morphology in children with unilaterally impacted incisors via three-dimensional analysis of digital dental casts: a controlled study.

Science.gov (United States)

Pavoni, Chiara; Franchi, Lorenzo; Buongiorno, Marco; Cozza, Paola

2016-01-01

The purpose of this work was to analyze variations in maxillary arch dimensions in subjects presenting unilaterally impacted maxillary permanent central incisors compared with a control group of subjects without eruption anomalies. A group of 23 Caucasian children [8 females and 15 males, mean age 9.7 years, standard deviation (SD) 1.6 years] displaying unilaterally impacted maxillary permanent central incisors (impacted incisor group: IIG) were compared with a control group (CG) of 23 subjects (9 females; 14 males, mean age 8.8 years, SD 1.9 years) presenting no eruption disorders. Pretreatment dental casts were taken from each subject and the upper arch was scanned using a three-dimensional scanner. Linear measurements were taken on each digital model to analyze maxillary arch dimensions. Significant between-group differences were tested with the Student's t test (p < 0.05). The transverse and sagittal upper-arch measurements were significantly smaller in the IIG than in the CG. In particular, the anterior arch was 1.35 mm shorter in the IIG, while intercanine width was decreased by 2.51 mm on the impacted side. Children revealing unilaterally impacted maxillary central incisors demonstrated a significantly constricted maxillary transverse width and shorter arch on the impacted side compared with subjects with no eruption disorders.

Comparison of panoramic radiograph with cone-beam computed tomography in assessment of maxillary sinus floor and nasal floor

Directory of Open Access Journals (Sweden)

Vijay Kumar Bokkasam

2015-01-01

Full Text Available Introduction: Panoramic radiograph is frequently prescribed by dentists for implant planning and, hence, accurate assessment of anatomical structures in panoramic radiograph is of utmost importance. Aims: The aim of the present study is to know the accuracy of panoramic radiograph in assessment of relationship between maxillary sinus floor and posterior teeth roots, and the distance from alveolar crest to nasal floor by comparing it with that of cone-beam computed tomographic (CBCT image. Materials and Methods: Panoramic and CBCT images of 30 patients were analyzed. The topographic relationship of each root of posterior teeth to the maxillary sinus floor was evaluated and classified into three classes. The distance from the peak point on maxillary alveolar crest to nasal floor was measured in panoramic radiograph as well as in CBCT image. All the measurements were made by built-in measurement tools. Results: Class 1 roots in panoramic radiograph showed high agreement (86% with CBCT image, followed by class 0 (76%. There was a significant difference in the measurements of alveolar bone height (ABH in the nasal floor region with a P value of 0.018. Conclusion: Panoramic radiograph is reliable in assessment of nasal floor and maxillary sinus, provided position of the patient, distortion, and the inherent magnification factor are taken into consideration.

Effects of pre-surgical nasoalveolar moulding on maxillary arch and nasal form in unilateral cleft lip and palate before lip surgery.

Science.gov (United States)

Fuchigami, T; Kimura, N; Kibe, T; Tezuka, M; Amir, M S; Suga, H; Takemoto, Y; Hashiguchi, M; Maeda-Iino, A; Nakamura, N

2017-11-01

To investigate the effects of pre-surgical nasoalveolar moulding (PNAM) on the maxillary arch and nasal form in patients with unilateral cleft lip and palate (UCLP). This is a retrospective case series study. The subjects were infants with complete UCLP who were treated with PNAM (n = 18) at Kagoshima University Medical and Dental Hospital (Japan) between 2006 and 2013. Maxillary dental casts and facial photographs were taken at the time of the first visit and immediately prior to lip surgery to evaluate the maxillary arch and nasal form changes. The dental casts were scanned with a laser scanner, and changes in the 3-Dimensional coordinates of anatomical landmarks and alveolar cleft width were analysed. Moreover, we investigated the correlation between the changes in the maxillary alveolar arch and nasal form. Regarding the maxillary alveolar arch form, the anterior points of the major segment had moved significantly to the cleft side just prior to the time of lip repair, and the alveolar cleft width was significantly decreased. For nasal form, the inclination and displacement of the columella were significantly improved. The improvement of columella inclination was moderately correlated with the posterior movement of the anterior points of the major segment. These findings indicate that PNAM for infants with UCLP enhanced symmetry in the maxillary alveolar arch and nasolabial form. In addition, the posterior movement of the anterior points of the maxillary alveolar arch was correlated with the improvement of columella deformation. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Alternativas a la elevación de seno maxilar: rehabilitación del sector posterior del maxilar atrófico mediante implantes pterigoideos Alternatives to maxillary sinus lift: posterior area of the atrophic maxilla rehabilitation by means pterigoideal implants

Directory of Open Access Journals (Sweden)

X. Rodríguez-Ciurana

2008-12-01

Full Text Available El primer y segundo molar son los dientes que se pierden más a menudo debido a la enfermedad periodontal y al exceso de fuerzas oclusales. A pesar de la frecuencia del edentulismo parcial del sector posterior raramente se ubican los implantes más allá de los premolares debido al aumento del índice de fallos. El escaso volumen óseo y la pobre mineralización del sector posterior del maxilar comprometen la viabilidad de las rehabilitaciones con implantes a largo plazo. Además, la cresta ósea a nivel del seno maxilar, en el maxilar atrófico, no suele permitir el anclaje de implantes de 10 mm. Se han propuesto varias técnicas para rehabilitar el sector posterior del maxilar atrófico: implantes cortos, extensiones protésicas, injerto sinusal, implante cigomático. El implante pterigoideo es otro de los posibles tratamientos para rehabilitar el sector posterior del maxilar atrófico. Anclado en el hueso cortical de la apófisis del esfenoides el implante pterigoideo evita la necesidad de injertar o utilizar extensiones protésicas. El objetivo de este artículo es analizar las indicaciones, la técnica, complicaciones y supervivencia del implante pterigoideo en el sector posterior del maxilar atrófico.The first and second molar are the teeth most commonly lost in the maxilla, mainly due to periodontal disease and excessive occlusal force. 1 Although partial edentulism of the posterior maxilla is common, implants are seldom placed distal to the premolars because failure rates in the posterior maxilla have historically been high. Poor volume and low density of bone are the worst conditions for long-term anchorage in the maxilla. 7 Moreover, bone under the maxillary sinus, in the atrophic maxilla, is usually insufficient to enable placement of 10 mm implants. Several techniques have been proposed to restore the atrophic posterior maxilla: short implants, prosthetic cantilevers, sinus bone graft, zigomatic fixtures. Pterygoid implants are

A radiographic study on the mucosal cyst of the maxillary sinus

Energy Technology Data Exchange (ETDEWEB)

Park, Eun Chun; Kim, Jae Duck [Dept. of Oral Radiology, College of Dentistry, Chosun University, Kwangju (Korea, Republic of)

1993-08-15

This study was performed to evaluate the role Waters' view and panoramic view for the interpretation of mucosal cyst of the maxillary sinus and to determine the radiographic features of that according to the sites and sizes. For this study, clinically 25 cases of mucosal cyst of the maxillary sinus were used, and experimentally with who dry skulls, rubber ball of 15 mm in diameter for marked radiopacity, and two jelly balls of 8 and 20 mm in diameter for the similar radiopacity to cyst were used. The 25 cases with 25 panoramic views and 15 Waters' views were first analyzed, and secondly, the radiographic features of artificial lesions attached to the each wall of the antrum on Waters' view and panoramic view were analyzed. The obtained results were as follows: At clinical analysis, 1. 4 cases of 13-14 mm, 4 cases of 15-19 mm, 14 cases of 20-25 mm, 3 cases of over 30 mm in diameter were found on panoramic views. And 24 cases of 25 cases showed no relationship with teeth, and only 1 case was associated with advanced periodontal disease. 2. The majority of mucosal cysts appeared to arise the posterior portion of the floor of the sinus and were superimposed with the inominate line of zygoma and the horizontally linear image of hard palate on panoramic view. 3. Only 2 cases of 15 cases were identified on both films.At experimental analysis, 4. On Waters' view, the images of the artificial lesion of the anterior portion and midportion of the floor of the sinus were lessened in diameter compared with the real size. On panoramic views, the images of the lesion were more radiolucent with lessened diameter than images on Waters' view. 5. The images of the lesion of the posterior wall and the posterior portion of the floor of sinus on panoramic view were well detected by the preedjucated group but not or poorly detected by the non-preeducated observer group. 6. On Waters' view, both observer groups recognized that the cystic images of the

Dental arch changes associated with rapid maxillary expansion: A retrospective model analysis study

Directory of Open Access Journals (Sweden)

Ivor M D′Souza

2015-01-01

Full Text Available Introduction: Transverse deficiency of the maxilla is a common clinical problem in orthodontics and dentofacial orthopedics. Transverse maxillary deficiency, isolated or associated with other dentofacial deformities, results in esthetic and functional impairment giving rise to several clinical manifestations such as asymmetrical facial growth, positional and functional mandibular deviations, altered dentofacial esthetics, adverse periodontal responses, unstable dental tipping, and other functional problems. Orthopedic maxillary expansion is the preferred treatment approach to increase the maxillary transverse dimension in young patients by splitting of the mid palatal suture. This orthopedic procedure has lately been subject of renewed interest in orthodontic treatment mechanics because of its potential for increasing arch perimeter to alleviate crowding in the maxillary arch without adversely affecting facial profile. Hence, the present investigation was conducted to establish a correlation between transverse expansion and changes in the arch perimeter, arch width and arch length. Methods: For this purpose, 10 subjects (five males, five females were selected who had been treated by rapid maxillary expansion (RME using hyrax rapid palatal expander followed by fixed mechanotherapy (PEA. Pretreatment (T1, postexpansion (T2, and posttreatment (T3 dental models were compared for dental changes brought about by RME treatment and its stability at the end of fixed mechanotherapy. After model measurements were made, the changes between T1-T2, T2-T3 and T1-T3 were determined for each patient. The mean difference between T1-T2, T2-T3 and T1-T3 were compared to assess the effects of RME on dental arch measurements. Results are expressed as mean ± standard deviation and are compared by repeated measures analysis of variance followed by a post-hoc test. Arch perimeter changes are correlated with changes in arch widths at the canine, premolar and molar

The Posterior Bundle's Effect on Posteromedial Elbow Instability After a Transverse Coronoid Fracture: A Biomechanical Study.

Science.gov (United States)

Shukla, Dave R; Golan, Elan; Weiser, Mitch C; Nasser, Philip; Choueka, Jack; Hausman, Michael

2018-04-01

There has been increased interest in the role of the posterior bundle of the medial collateral ligament (pMUCL) in the elbow, particularly its effects on posteromedial rotatory stability. The ligament's effect in the context of an unfixable coronoid fracture has not been the focus of any study. The purposes of this biomechanical study were to evaluate the stabilizing effect of the pMUCL with a transverse coronoid fracture and to assess the effect of graft reconstruction of the ligament. We simulated a varus and internal rotatory subluxation in 7 cadaveric elbows at 30°, 60°, and 90° elbow flexion. The amount of ulnar rotation and medial ulnohumeral joint gapping were assessed in the intact elbow after we created a transverse coronoid injury, after we divided the pMUCL, and finally, after we performed a graft reconstruction of the pMUCL. At all angles tested, some stability was lost after cutting the pMUCL once the coronoid had been injured, because mean proximal ulnohumeral joint gapping increased afterward by 2.1, 2.2, and 1.3 mm at 90°, 60°, and 30°, respectively. Ulnar internal rotation significantly increased after pMUCL transection at 90°. At 60° and 30° elbow flexion, ulnar rotation increased after resection of the coronoid but not after pMUCL resection. An uninjured pMUCL stabilizes against varus internal rotatory instability in the setting of a transverse coronoid fracture at higher flexion angles. Further research is needed to optimize graft reconstruction of the pMUCL. The pMUCL is an important secondary stabilizer against posteromedial instability in the coronoid-deficient elbow. In the setting of an unfixable coronoid fracture, the surgeon should examine for posteromedial instability and consider addressing the pMUCL surgically. Copyright © 2018 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Maxillary canine impactions related to impacted central incisors: two case reports.

Science.gov (United States)

Bayram, Mehmet; Ozer, Mete; Sener, Ismail

2007-09-01

The purpose of this case report is to describe the combined surgical and orthodontic treatment of two cases with an impacted maxillary central incisor and canine in the same quadrant and to discuss the causal relationship between them. The most common causes of canine impactions are usually the result of one or more factors such as a long path of eruption, tooth size-arch length discrepancies, abnormal position of the tooth bud, prolonged retention or early loss of the deciduous canine, trauma, the presence of an alveolar cleft, ankylosis, cystic or neoplastic formation, dilaceration of the root, supernumerary teeth, and odontomas. Although impaction of the maxillary central incisor is almost as prevalent as impacted canines its etiology is different. The principal factors involved in causing the anomaly are supernumerary teeth, odontomas, and trauma. Case #1: A 10.5-year-old girl in the early mixed dentition stage presented with a chief complaint of the appearance of her anterior teeth. She had a Class I skeletal pattern and a history of trauma to the maxillary central incisors at age five with premature exfoliation. Radiographs revealed an impacted upper right central incisor in the region of the nasal floor, delayed eruption of the maxillary permanent central incisor, and the adjacent lateral incisor was inclined toward the edentulous space. Treatment was done in two stages consisting of surgical exposure and traction of the impacted central incisor and fixed orthodontic treatment. Case #2: An 11.5-year-old girl presented for orthodontic treatment with the chief complaint of an unerupted tooth and the appearance of her upper anterior teeth. She was in the late mixed dentition period with a Class III skeletal pattern along with an anterior cross-bite with some maxillary transverse deficiency. The maxillary right canine and central incisor were absent, but the maxillary right deciduous canine was still present. Treatment included arch expansion followed by

Morphological study of maxillary canine region based on CT

International Nuclear Information System (INIS)

Yamada, Maiko; Takamori, Hitoshi; Ide, Yoshiaki; Yosue, Takashi

2010-01-01

The maxilla is generally known as a site where anatomical limitations make it difficult to obtain sufficient bone volume. A large amount of bone exists in the canine region between the anterior margin of the maxillary sinus and the piriform aperture margin. Although this region is crucial for implant treatments, there have not been any reports on morphological studies of the region. In this study, we investigated the morphology of the canine region based on CT, and also the morphology and position of the maxillary sinus located posterior to the canine region. The results were as follows: In the area above the anterior nasal spine, the higher the level, the smaller the mesio-distal length and the bucco-lingual width tended to become. In the area above the anterior nasal spine, the mesio-distal length and the bucco-lingual width tended to be smaller in female patients than in male patients. In the area above the anterior nasal spine, no significant differences in mesio-distal length and bucco-lingual width were observed between dentulous and edentulous jaws. The morphology of the maxillary sinus was mainly of an inverse-trapezoidal, circular, or triangular form. The position of the anterior wall of the maxillary sinus was most frequently found at the site corresponding to the second premolar. Through this study, we have reconfirmed that the canine region is vital for implant treatments in the maxilla. (author)

En-masse retraction with a preformed nickel-titanium and stainless steel archwire assembly and temporary skeletal anchorage devices without posterior bonding.

Science.gov (United States)

Jee, Jeong-Hyun; Ahn, Hyo-Won; Seo, Kyung-Won; Kim, Seong-Hun; Kook, Yoon-Ah; Chung, Kyu-Rhim; Nelson, Gerald

2014-09-01

To evaluate the therapeutic effects of a preformed assembly of nickel-titanium (NiTi) and stainless steel (SS) archwires (preformed C-wire) combined with temporary skeletal anchorage devices (TSADs) as the sole source of anchorage and to compare these effects with those of a SS version of C-wire (conventional C-wire) for en-masse retraction. Thirty-one adult female patients with skeletal Class I or II dentoalveolar protrusion, mild-to-moderate anterior crowding (3.0-6.0 mm), and stable Class I posterior occlusion were divided into conventional (n = 15) and preformed (n = 16) C-wire groups. All subjects underwent first premolar extractions and en-masse retraction with pre-adjusted edgewise anterior brackets, the assigned C-wire, and maxillary C-tubes or C-implants; bonded mesh-tube appliances were used in the mandibular dentition. Differences in pretreatment and post-retraction measurements of skeletal, dental, and soft-tissue cephalometric variables were statistically analyzed. Both groups showed full retraction of the maxillary anterior teeth by controlled tipping and space closure without altered posterior occlusion. However, the preformed C-wire group had a shorter retraction period (by 3.2 months). Furthermore, the maxillary molars in this group showed no significant mesialization, mesial tipping, or extrusion; some mesialization and mesial tipping occurred in the conventional C-wire group. Preformed C-wires combined with maxillary TSADs enable simultaneous leveling and space closure from the beginning of the treatment without maxillary posterior bonding. This allows for faster treatment of dentoalveolar protrusion without unwanted side effects, when compared with conventional C-wire, evidencing its clinical expediency.

Three-year treatment outcomes with three brands of implants placed in the posterior maxilla and mandible of partially edentulous patients

NARCIS (Netherlands)

Ozkan, Yasar; Ozcan, Mutlu; Akoglu, Burcin; Ucankale, Mert; Kulak-Ozkan, Yasemin

Statement of problem. Survival rates of implants in posterior regions vary among clinical studies. Problems occur more often in the posterior segment of the maxilla due to proximity of the maxillary sinus and reduced quality or quantity of alveolar bone. Purpose. This clinical study evaluated the

The Efficacy of Buccal Infiltration of 4% Articaine and PSA Injection of 2% Lidocaine on Anesthesia of Maxillary Second Molars

OpenAIRE

Maljaei, Ensiyeh; Pourkazemi, Maryam; Ghanizadeh, Milad; Ranjbar, Rana

2017-01-01

Introduction: During the early mixed dentition period, the location of the deciduous maxillary second molar results in ineffectiveness of the infiltration technique in this area. In such cases, administration of posterior superior alveolar (PSA) nerve block is recommended; however, such a technique has some complications. The present study was undertaken to compare the effects of buccal infiltration of 4% Articaine and PSA technique with 2% Lidocaine on the success of anesthesia of maxillary ...

A case report of incidental finding of fungus ball on CBCT of maxillary sinus in treatment planning of dental implant

International Nuclear Information System (INIS)

Lee, Byung Do

2010-01-01

This report was to show the radiographic appearances of the fungus ball in a paranasal sinus and to emphasize the scan area of cone beam computed tomography (CBCT) to detect the calcification in the paranasal sinus. A seventy four-year-old woman visited our department for the implant rehabilitation at both maxillary posterior edentulous region. Pre-operative radiographic examinations including the panoramic, CBCT, and multidector CT images were taken. An opacification in the right maxillary sinus was observed on the multiplanar image of CBCT, however the pre-determined scan area of CBCT in this report hardly showed the calcifications at the central portion of the maxillary sinus. The opacification in the maxillary sinus could be misdiagnosed as chronic maxillary sinusitis if the calcification of fungus ball was not simultaneously detected. The scan area of pre-operative CBCT needs to be enough to scan the paranasal sinus from top to bottom.

Effect of different curing temperatures on the distortion at the posterior peripheral seal: An in vitro study

Directory of Open Access Journals (Sweden)

Nirmala Pasam

2012-01-01

Conclusion: This study verified the observation that maxillary complete denture base show the greatest discrepancy at the central portion of the posterior palatal seal region as the processing temperature increases.

Myxoid Type of Malignant Fibrous Histiocytoma of the Maxillary Sinus: A Case Report

Directory of Open Access Journals (Sweden)

Amir Hossein Jafarian

2011-04-01

Full Text Available Introduction: Myxofibrosarcoma was originally described as the myxoid variant of Malignant Fibrous Histiocytoma (MFH, a high-grade and aggressive sarcoma, which is very uncommon in the head and neck region, with about 100 cases reported up to now. MFH occurring in the maxillary sinus is so rare that only 23 cases have been reported. We hereby report a case of myxofibrosarcoma in the maxillary sinus. Case Report: The case was a 54-year-old male with symptoms of toothache in the right posterior maxillary teeth, a swelling adjacent to maxillary molar region and symptoms of chronic maxillary sinusitis. In clinical examination, the teeth were sensitive to percussion and palpation, but no caries and restoration was detected on his molar teeth. He was suffering from local pain and tenderness over his midface and mild fever, fatigue and some nonspecific vague pain. CT scan showed a mass lesion involving right nasal cavity, maxillary and ethmoidal sinuses. A low-grade malignancy arising from the right maxillary sinus was highly suspected. A surgery was done to remove the mass. The histological and immunohistochemical studies proved the diagnosis of myxoid variant of Malignant Fibrous Histiocytoma. Therefore radiotherapy and chemotherapy was started for the patient but six months later the symptoms returned and CT scan showed a right maxillary and ethmoidal mass that extended to base of the skull. Maxillectomy and ethmoidectomy were performed for the patient, but 2 months later he died because of the extension of the tumor, which confirmed the necessity of early diagnosis. Conclusion: Amplified radical surgery is the first choice of treatment. The second surgery has special value to the recurrent patients. Radiotherapy alone or chemotherapy alone is not effective to MFH of head and neck region

Inclination of the infraorbital canal studied on dry skulls expresses the maxillary growth pattern: a new contribution to the understanding of change in inclination of ectopic canines during puberty

DEFF Research Database (Denmark)

Caspersen, Louise M; Christensen, Ib J; Kjær, Inger

2009-01-01

Objective. The purpose of this study was to analyze the correlation between direction of the infraorbital canal and maxillary width on frontal radiographs of dry human skulls. Material and methods. Forty-two symmetrical, dry human skulls (late adolescence and adult) with no dental or skeletal...... anomalies. Frontal radiographs were taken of each skull placed in the Frankfort horizontal plane, with a radiopaque marker in the infraorbital canal. The maxillary transversal growth pattern was expressed as the infraorbital transversal angle (IOt) formed between a line through the contour of the bilateral...

The use of maxillary sinus dimensions in gender determination: a thin-slice multidetector computed tomography assisted morphometric study.

Science.gov (United States)

Ekizoglu, Oguzhan; Inci, Ercan; Hocaoglu, Elif; Sayin, Ibrahim; Kayhan, Fatma Tulin; Can, Ismail Ozgur

2014-05-01

Gender determination is an important step in identification. For gender determination, anthropometric evaluation is one of the main forensic evaluations. In the present study, morphometric analysis of maxillary sinuses was performed to determine gender. For morphometric analysis, coronal and axial paranasal sinus computed tomography (CT) scan with 1-mm slice thickness was used. For this study, 140 subjects (70 women and 70 men) were enrolled (age ranged between 18 and 63). The size of each subject's maxillary sinuses was measured in anteroposterior, transverse, cephalocaudal, and volume directions. In each measurement, the size of the maxillary sinus is significantly small in female gender (P discrimination analysis was performed, the accuracy rate was detected as 80% for women and 74.3% for men with an overall rate of 77.15%. With the use of 1-mm slice thickness CT, morphometric analysis of maxillary sinuses will be helpful for gender determination.

Long-term follow-up after maxillary distraction osteogenesis in growing children with cleft lip and palate.

Science.gov (United States)

Huang, Chiung-Shing; Harikrishnan, Pandurangan; Liao, Yu-Fang; Ko, Ellen W C; Liou, Eric J W; Chen, Philip K T

2007-05-01

To evaluate the changes in maxillary position after maxillary distraction osteogenesis in six growing children with cleft lip and palate. Retrospective, longitudinal study on maxillary changes at A point, anterior nasal spine, posterior nasal spine, central incisor, and first molar. The University Hospital Craniofacial Center. Cephalometric radiographs were used to measure the maxillary position immediately after distraction, at 6 months, and more than 1 year after distraction. After maxillary distraction with a rigid external distraction device, the maxilla (A point) on average moved forward 9.7 mm and downward 3.5 mm immediately after distraction, moved backward 0.9 mm and upward 2.0 mm after 6 months postoperatively, and then moved further backward 2.3 mm and downward 6.8 mm after more than 1 year from the predistraction position. In most cases, maxilla moved forward at distraction and started to move backward until 1 year after distraction, but remained forward, as compared with predistraction position. Maxilla also moved downward during distraction and upward in 6 months, but started descending in 1 year. There also was no further forward growth of the maxilla after distraction in growing children with clefts.

One-stage tooth-borne distraction versus two stage bone-borne distraction in surgically assisted maxillary expansion (SARME).

Science.gov (United States)

Seeberger, Robin; Abe-Nickler, Dorothee; Hoffmann, Jürgen; Kunzmann, Kevin; Zingler, Sebastian

2015-12-01

To evaluate and compare the effects of tooth-borne and bone-borne distraction devices in surgically assisted maxillary expansion (SARME) on dental and skeletal structures. A sample of 33 skeletally mature patients with transverse maxillary deficiencies was examined with cone beam computed tomography (CBCT) before and 3 months after surgery. Fourteen patients were treated with tooth-borne devices and 19 patients with bone-borne devices. Dental crown expansion in the first premolars did not differ significantly between the two groups, and median expansion was 5.55 mm (interquartile range [IQR] 5.23) in the tooth-borne device group and 4.6 mm (IQR 3.4) in the bone-borne device group. In the first molars, crown expansion and lateral tipping were significantly greater in the tooth-borne device group (P ≤ .02). The median skeletal nasal isthmus increase was significantly more in the bone-borne device group at 3.0 mm than in the tooth-borne device group at 0.98 mm (P ≤ .02). Both tooth-borne and bone-borne devices are effective treatment modalities to correct maxillary transverse deficiencies. Bone-borne devices produced greater widening of the skeletal nasal floor and fewer dental side effects in the first molars. Copyright © 2015 Elsevier Inc. All rights reserved.

En-masse retraction with a preformed nickel-titanium and stainless steel archwire assembly and temporary skeletal anchorage devices without posterior bonding

Science.gov (United States)

Jee, Jeong-Hyun; Ahn, Hyo-Won; Seo, Kyung-Won; Kook, Yoon-Ah; Chung, Kyu-Rhim; Nelson, Gerald

2014-01-01

Objective To evaluate the therapeutic effects of a preformed assembly of nickel-titanium (NiTi) and stainless steel (SS) archwires (preformed C-wire) combined with temporary skeletal anchorage devices (TSADs) as the sole source of anchorage and to compare these effects with those of a SS version of C-wire (conventional C-wire) for en-masse retraction. Methods Thirty-one adult female patients with skeletal Class I or II dentoalveolar protrusion, mild-to-moderate anterior crowding (3.0-6.0 mm), and stable Class I posterior occlusion were divided into conventional (n = 15) and preformed (n = 16) C-wire groups. All subjects underwent first premolar extractions and en-masse retraction with pre-adjusted edgewise anterior brackets, the assigned C-wire, and maxillary C-tubes or C-implants; bonded mesh-tube appliances were used in the mandibular dentition. Differences in pretreatment and post-retraction measurements of skeletal, dental, and soft-tissue cephalometric variables were statistically analyzed. Results Both groups showed full retraction of the maxillary anterior teeth by controlled tipping and space closure without altered posterior occlusion. However, the preformed C-wire group had a shorter retraction period (by 3.2 months). Furthermore, the maxillary molars in this group showed no significant mesialization, mesial tipping, or extrusion; some mesialization and mesial tipping occurred in the conventional C-wire group. Conclusions Preformed C-wires combined with maxillary TSADs enable simultaneous leveling and space closure from the beginning of the treatment without maxillary posterior bonding. This allows for faster treatment of dentoalveolar protrusion without unwanted side effects, when compared with conventional C-wire, evidencing its clinical expediency. PMID:25309863

Effects of maxillary sinus floor elevation surgery on maxillary sinus physiology

NARCIS (Netherlands)

Timmenga, NM; Raghoebar, GM; Liem, RSB; van Weissenbruch, R; Manson, WL; Vissink, A

In a prospective study, the effects of elevation surgery of the maxillary sinus floor on maxillary sinus physiology were assessed. Seventeen consecutive patients without preoperative anamnestic, clinical and radiological signs of maxillary sinusitis underwent sinus floor elevation surgery with iliac

A radiographic study on the morphology of the maxillary sinus in adolescents and adults

International Nuclear Information System (INIS)

Ko, Kang Joon; Lee, Sang Rae

1984-01-01

The purpose of this study was radiographic analysis of the morphology of maxillary sinus in adolescents and adults. In order to analyze the morphology of maxillary sinus in view point of anteroposterior width of medial wall, vertical distance between antral floor and nasal floor level, anterior extension, distance between antral floor and maxillary 1st molar apex, and types of lower border of maxillary sinus, specialized maxillary projection and periapical view with paralleling technique was taken. The author examined orthopantomograms and intraoral standard views taken from 400 adolescents and adults ranged 15-65 years-old. The obtained results were as follows: 1. The antero-posterior width of medial wall of maxillary sinus was 32.80 mm in 15-19 year-old group, 33.86 mm in 20-24 year-old group, 34.09 mm in 25-29 year-old group, and 33.67 mm in 30-65 year-old group, and left maxillary sinus was somewhat smaller than the right. 2. The vertical distance between antral floor and nasal floor level was 8.49 mm in 15-19 year-old group, 9.05 mm i n 20-24 year-old group, 8.95 mm in 25-29 year-old group, and 8.32 mm in 30-65 year-old group. 3. The order of anterior extension of maxillary sinus were distal half of canine, mesial half of canine, mesial half of 1st premolar, and distal half of 1st premolar. 4. The distance between antral floor and maxillary 1st molar were 4.36 mm in 15-19 year-old group, 4.77 mm in 20-24 yea r-old group, 3.58 mm in 25-29 year-old group, and 2.33 mm in 30-65 year-old group. 5. The order of the types of lower border of maxillary sinus were entire downward type, close type, partially downward type, waving type, separating type, and indistinct. In the types of antral floor, there was a tendency to increase the separating type with age.

Orthodontic management of an impacted maxillary incisor due to odontoma

Directory of Open Access Journals (Sweden)

Rahul S Baldawa

2011-01-01

Full Text Available Odontomas are a heterogeneous group of jaw bone lesions, classified as odontogenic tumors which usually include well-diversified dental tissues. Odontomas are the most common type of odontogenic tumors and generally they are asymptomatic. Two types of odontomas are described: compound and complex based on either the appearance of well-organized tooth-like structures (compound odontomas or on a mass of disorganized odontogenic tissues (complex odontomas. Compound odontomas have a predilection for the anterior maxilla, whereas complex odontomas have a predilection for the posterior mandible. Odontomas frequently interfere with eruption of teeth leading to their impaction. This is a case report of a 14-year-old girl with an unerupted maxillary right central incisor due to a complex composite odontoma a rare occurrence in anterior maxilla. Surgical excision of the odontoma and orthodontic treatment to get the impacted maxillary right central incisor into alignment is discussed.

Immediate impact of rapid maxillary expansion on upper airway dimensions and on the quality of life of mouth breathers

Directory of Open Access Journals (Sweden)

Edna Namiko Izuka

2015-06-01

Full Text Available OBJECTIVE: To assess short-term tomographic changes in the upper airway dimensions and quality of life of mouth breathers after rapid maxillary expansion (RME. METHODS: A total of 25 mouth breathers with maxillary atresia and a mean age of 10.5 years old were assessed by means of cone-beam computed tomography (CBCT and a standardized quality of life questionnaire answered by patients' parents/legal guardians before and immediately after rapid maxillary expansion. RESULTS: Rapid maxillary expansion resulted in similar and significant expansion in the width of anterior (2.8 mm, p < 0.001 and posterior nasal floor (2.8 mm, p < 0.001. Although nasopharynx and nasal cavities airway volumes significantly increased (+1646.1 mm3, p < 0.001, oropharynx volume increase was not statistically significant (+1450.6 mm3, p = 0.066. The results of the quality of life questionnaire indicated that soon after rapid maxillary expansion, patients' respiratory symptoms significantly decreased in relation to their initial respiratory conditions. CONCLUSIONS: It is suggested that RME produces significant dimensional increase in the nasal cavity and nasopharynx. Additionally, it also positively impacts the quality of life of mouth-breathing patients with maxillary atresia.

Maxillary implant-supported overdentures opposed by (partial) natural dentitions: a 5-year prospective case series study.

Science.gov (United States)

Boven, G C; Slot, J W A; Raghoebar, G M; Vissink, A; Meijer, H J A

2017-12-01

The aim of this study was to assess the 5-year treatment outcome of maxillary implant-retained overdentures opposed by natural antagonistic teeth. Fifty consecutive patients received maxillary overdentures supported by six dental implants. Implants were placed in the anterior region, if enough bone was present (n = 25 patients) Implant were placed in the posterior region if implant placement in the anterior region was not possible (n = 25 patients). Variables assessed included survival of implants, condition of hard and soft peri-implant tissues and patients' satisfaction. The five-year implant survival rate was 97·0% and 99·3%, and mean radiographic bone loss was 0·23 and 0·69 mm in the anterior and posterior group, respectively. Median scores for plaque, calculus, gingiva, bleeding and mean scores for pocket probing depth were low and stayed low. Patients' satisfaction after treatment was high in both groups. Within the limits of this 5-year study, it is concluded that six dental implants (placed in the anterior or posterior region) connected with a bar and opposed to natural antagonistic teeth result in acceptable results for clinical parameters and good outcomes for marginal bone level changes and patient satisfaction. © 2017 John Wiley & Sons Ltd.

Angulated Dental Implants in Posterior Maxilla FEA and Experimental Verification

Directory of Open Access Journals (Sweden)

Hamed A. Hamed

2018-02-01

Full Text Available AIM: This study aimed to evaluate the effect of different implant angulations in posterior maxilla on stress distribution by finite element analysis and verify its results experimentally. METHODS: Two simplified models were prepared for an implant placed vertically and tilted 25° piercing the maxillary sinus. Geometric models' components were prepared by Autodesk Inventor then assembled in ANSYS for finite element analysis. The results of finite element analysis were verified against experimental trials results which were statistically analysed using student t-test (level of significance p < 0.05. RESULTS: Implant - abutment complex absorbed the load energy in case of vertical implant better than the case of angulated one. That was reflected on cortical bone stress, while both cases showed stress levels within the physiological limits. Comparing results between FEA and experiment trials showed full agreement. CONCLUSION: It was found that the tilted implant by 25° can be utilised in the posterior region maxilla for replacing maxillary first molar avoiding sinus penetration. The implant-bone interface and peri-implant bones received the highest Von Mises stress. Implant - bone interface with angulated implant received about 66% more stresses than the straight one.

Angulated Dental Implants in Posterior Maxilla FEA and Experimental Verification.

Science.gov (United States)

Hamed, Hamed A; Marzook, Hamdy A; Ghoneem, Nahed E; El-Anwar, Mohamed I

2018-02-15

This study aimed to evaluate the effect of different implant angulations in posterior maxilla on stress distribution by finite element analysis and verify its results experimentally. Two simplified models were prepared for an implant placed vertically and tilted 25° piercing the maxillary sinus. Geometric models' components were prepared by Autodesk Inventor then assembled in ANSYS for finite element analysis. The results of finite element analysis were verified against experimental trials results which were statistically analysed using student t-test (level of significance p < 0.05). Implant - abutment complex absorbed the load energy in case of vertical implant better than the case of angulated one. That was reflected on cortical bone stress, while both cases showed stress levels within the physiological limits. Comparing results between FEA and experiment trials showed full agreement. It was found that the tilted implant by 25° can be utilised in the posterior region maxilla for replacing maxillary first molar avoiding sinus penetration. The implant-bone interface and peri-implant bones received the highest Von Mises stress. Implant - bone interface with angulated implant received about 66% more stresses than the straight one.

Rehabilitation of large maxillary defect with two-piece maxillary obturators

Directory of Open Access Journals (Sweden)

Kanchan P Dholam

2015-01-01

Full Text Available The insertion and removal of an obturator in large maxillary defects with or without trismus is difficult. Fabrication of a two-piece obturator in such cases overcomes this problem. This article describes rehabilitation of large maxillary defects with two piece maxillary obturator of three types. All these obturators have a maxillary plate and a bulb component, which are approximated together by various techniques namely, silicone cover, embedded magnets, and press studs. Prosthetic rehabilitation of large maxillary defects with two-piece obturators offers the possibility of adequate oral rehabilitation by fabricating light weight prosthesis, which is easy to use. The bulb covers the undercut areas of the defect enhancing the facial contour and retention. It facilitates easy examination of underlying tissues, recreation of the anatomic barrier between the oral and nasal cavities and restoration of the function and esthetics. Thus, it adds to the quality of life.

[Piezosurgery for surgically assisted rapid maxillary expansion under local anesthesia].

Science.gov (United States)

Sun, Hao; Li, Biao; Sun, Hao; Liu, Zhixu; Wang, Xudong

2014-08-01

This study evaluates piezosurgery for surgically assisted rapid maxillary expansion (SARME) under local anesthesia. SARME was performed on adults with maxillary transverse deficiency under local anesthesia with a piezosurgical device. Fourteen patients (six males and eight females) underwent lateral maxillary osteotomies, midpalatal osteotomies, and bilateral pterygomaxillary disjunction. The feelings of patients during the operation were determined through questionnaires. All patients underwent SARME in the out-patient operating room. The surgical procedures were completed under local anesthesia. All patients exhibited satisfactory tolerance. Ultrasonic bone-cutting surgery was recently introduced as a feasible alternative to the conventional tools of cranio-maxillofacial surgery for its technical characteristics of precision and safety. The device used was unique in that cutting action occurred when the tool was employed on mineralized tissues, but stoped on soft tissues. The results of the questionnaires showed that eight (57.14%) patients felt a mild sensation of ultrasonic vibration, tweleve (85.7 1%) felt mild tolerable pain and tooth soreness during surgery, and eleven (78.57%) felt little fear and hardly heard the ultrasonic sound. Preoperative and postoperative six months later measurements showed an evident effect of expansion. Piezosurgery enabled patients to undergo all the steps of SARME under local anesthesia, but more cases and longer follow-up are needed to verif ' the results.

Maxillary advancement for mandibular prognathism: indications and rationale.

Science.gov (United States)

Rosen, H M

1991-05-01

The surgical correction of mandibular prognathism has traditionally involved posterior repositioning of the mandibular body. This treatment approach corrects the skeletal disproportion at the expense of reducing facial skeletal volume and can unpredictably result in inadequately supported soft tissues with loss of skeletal definition. In an effort to avoid these sequelae of mandibular reduction, 18 patients diagnosed as having mandibular prognathism were treated with maxillary advancement surgery at the Le Fort I level. Mean patient SNB angle was 85.2 degrees, as compared with a normal 79 +/- 3 degrees. Maxillae were documented to be in normal position relative to both cranial base and Frankfort horizontal. The mean maxillary advancement was 6.9 mm, with a range of 4.5 to 8.8 mm. All patients required genioplasty to reduce vertical chin height and/or to laterally shift the chin. At the time of follow-up (mean 16.2 months), all patients retained cephalometric data suggestive of enlarged mandibles and excessive anterior facial divergence. However, maxillomandibular harmony and facial convexity had been restored without sacrificing skeletal volume. Treatment results demonstrated these faces to be skeletally well proportioned despite lower face protrusion that was beyond "normal." Postoperative appearances were characterized by a well-supported soft-tissue envelope and a highlighted skeletal foundation, creating angular, well-defined lower faces. These findings support the credibility of maxillary advancement as the procedure of choice in selected individuals with mandibular prognathism. Indications and an aesthetic rationale for this surgical approach are presented.

"Converting a bi-jaw surgery to a single-jaw surgery:" Posterior maxillary dentoalveolar intrusion with microimplants to avoid the need of a maxillary surgery in the surgical management of skeletal Class III vertical malocclusion

Directory of Open Access Journals (Sweden)

Abhisek Ghosh

2016-01-01

Full Text Available The management of a vertical skeletal Class III malocclusion with mandibular prognathism revolves around the protocol of bi-jaw surgery (maxillary LeFort I impaction and mandibular bilateral sagittal split osteotomy with setback. The maxillary surgery not only provides increased stability to the ultimate surgical outcome but also increases the amount by which the mandibular set back can be done, therefore aiding in greater profile improvement. With the need of maxillary surgery almost inevitable in treating such situations, the complexity and the increased discomfort associated with such surgery can never be ignored. Is it at all possible to convert a bi-jaw surgery into a single-jaw surgery with the aid of microimplants? With increasing number of patients being treated with microimplants for anterior openbite and gummy smiles, our idea was to incorporate this novel protocol in treating Class III vertical situations and therefore avoid the need of a maxillary surgery in treating such a situation, together with achieving optimum treatment outcome.

Maxillary Hypoplasia With Congenital Oligodontia Treated by Maxillary Distraction Osteogenesis.

Science.gov (United States)

Mishima, Sayaka; Yamaguchi, Takako; Watanabe, Takuma; Komatani, Toru; Nakao, Kazumasa; Takahashi, Katsu; Bessho, Kazuhisa

2018-02-27

It is known that congenitally missing teeth can often cause differences in craniofacial morphology; however, there are few reported cases of orthognathic surgical treatment for these patients. Herein, the authors report a rare case of maxillary hypoplasia with congenital oligodontia treated by maxillary distraction osteogenesis with internal device. A 17-year-old male presenting with multiple tooth agenesis and maxillary recession was referred to our hospital for orthognathic surgical treatment. Preoperative simulation surgery was performed using Full-Color 3-dimensional salt model. After surgery, improvement in maxillary recession and occlusal stability was observed. This report demonstrates the advantages of the method used herein, which includes reduction in operating time with increase in the safety of the procedure.

Managing the severely proclined maxillary anteriors by extracting traumatized right maxillary central incisor

Directory of Open Access Journals (Sweden)

Mahesh Jain

2014-01-01

Full Text Available A 14-year-old girl reported with severely proclined maxillary anterior teeth with fractured and discolored right maxillary central incisor with questionable prognosis. Autotransplantation of premolar to replace central incisor was considered a risky option as patient was 14-year-old with presence of advanced root development of premolar. The immediate placement of the prosthetic implant was also not possible because of patient′s age. Therefore, it was decided to use the space obtained by extracting questionable maxillary right central incisor for orthodontic purpose and also sacrificing the healthy premolar is invariably an excessive biological cost for a modest functional and aesthetic gain. Hence, the treatment plan for this case includes extraction of right maxillary central incisor and left maxillary first premolar, movement of right maxillary lateral incisor mesially, achieving normal axial inclination of maxillary anteriors with normal overjet and overbite. Mandibular arch was treated nonextraction due to congenitally missing central incisors with presence of normally inclined lower anteriors thereby maintaining Angles class I occlusion. Tipping, usually, seen in Begg mechanotherapy was used for our advantage to correct severely proclined maxillary anteriors with simultaneous bite opening mechanics. Case was completed in 19 months and posttreatment records including photographs, radiographs and study models were made. Begg wrap around the retainer was placed in the maxillary arch allowing natural settling of occlusion.

Clinical and radiographic evaluation of maxillary central incisors exposure in patients undergoing maxillary advancement

Directory of Open Access Journals (Sweden)

Guilherme dos Santos Trento

2015-12-01

Full Text Available Abstract Introduction: Patients with dentofacial deformities may undergo orthodontic or orthodontic-surgical treatment. Both modalities can affect esthetics. Objective: This study aims to evaluate clinical and radiographic changes in exposure of maxillary central incisors occurring after orthognathic surgery for maxillary advancement. Methods: A total of 17 patients who underwent orthognathic surgery for maxillary advancement between September, 2010 and July, 2011 were selected. Exposure of maxillary central incisors was evaluated clinically and by lateral cephalograms. Measurements were taken one week before and three months after surgery. Data were paired in terms of sex, age, nasolabial angle, height and thickness of the upper lip, the amount of maxillary advancement, clinical exposure and inclination of maxillary central incisor by statistical tests (CI 95%. Results: After maxillary advancement, incisor clinical exposure had increased even with relaxed lips and under forced smile. Moreover, there was a mean increase of 23.33% revealed by lateral cephalograms. There was an inverse correlation between upper lip thickness and incisors postsurgical exposure revealed by radiographic images (p = 0.002. Conclusions: Significant changes in the exposure of maxillary central incisors occur after maxillary advancement, under the influence of some factors, especially lip thickness.

Maxillary Four Implant-retained Overdentures via Locator® Attachment: Intermediate-term Results from a Retrospective Study.

Science.gov (United States)

Wang, Feng; Monje, Alberto; Huang, Wei; Zhang, Zhiyong; Wang, Guomin; Wu, Yiqun

2016-06-01

Maxillary overdentures have been utilized to restore oral function in scenarios where limited bone structure represents a drawback for financial issues and for cases where oral hygiene is uncertain. The aim of this study was to evaluate the intermediate-term clinical outcome of four locator attachment retaining maxillary overdentures and to test their reliability. A retrospective study was conducted from January 2007 to October 2013. After the placement of four maxillary dental implants and a healing period of approximately 3 months, all the implants were restored with locator-retained overdentures with partial palatal coverage. Subjects and implant characteristics, implant position (anterior vs posterior maxilla), bone quality, and opposing dentition were recorded. Peri-implant clinical parameters and marginal bone loss (MBL) were evaluated after delivery of the final prosthesis and annually thereafter. The performance of locator components and the prosthetic restoration were also recorded at follow-up. A total of 104 implants were placed in 26 subjects (11 women, 15 men; mean age, 64 years; age range, 55-76 years). One implant failed before loading. One subject dropped out of the study during a mean follow-up period of 46 months (range: 7-73 months), achieving an overall survival rate of 95.2%. Clinical parameters revealed healthy tissues around most of the implants, with low scores of plaque and bleeding indices. At the last follow-up evaluation, the mean MBL was 1.7 ± 1.1 mm (0.4-2.6 mm). Regression model analysis indicated that MBL for implants in the posterior maxilla was significantly higher than that for implants in the anterior maxilla (p = .0487). Overall, 26 technical and prosthetic complications were reported. Within the limitations of this study, maxillary four implant-retained overdentures via Locator attachment seem to be a predictable alternative for oral rehabilitation. © 2015 Wiley Periodicals, Inc.

Non-surgical Management of Skeletal Class III Malocclusion with Bilateral Posterior Crossbite: A Case Report.

Science.gov (United States)

Kumari, Lalima; Nayan, Kamal

2016-12-01

A 16-year-old female patient with skeletal Class III malocclusion and bilateral posterior cross bite complaining of difficulty in chewing was treated orthodontically without surgery (camouflage treatment). The treatment comprised of fixed orthodontic treatment with MBT prescription (0.022˝×0.028˝ slot) using quad helix appliance for bilateral expansion of maxillary arch and Class III elastics for occlusal correction. Post-treatment records showed normal overbite and overjet with acceptable occlusion. So with this treatment strategy of expanding the maxillary arch using a quad helix appliance and use of Class III elastics, we achieved a good result with optimal occlusion.

Control of anterior segment using an antero-posterior lingual sliding retraction system: a preliminary cone-beam CT study

Directory of Open Access Journals (Sweden)

Min Hwang

2018-01-01

Full Text Available Abstract Background This study was performed to evaluate the treatment effects of the antero-posterior lingual retractor (APLR, focusing on the 3-dimensional (3D tooth movement of the maxillary anterior teeth and their alveolar bone levels. Methods En masse retraction was performed using either the C-lingual retractor (CLR, C-group, n = 9 or the antero-posterior lingual retractor (APLR, AP-group, n = 8. We evaluated 3D movement of the maxillary anterior teeth and alveolar bone levels, root length of the central incisors, long axes of the maxillary canines, and occlusal plane changes from CBCT images. Results After retraction, the central incisors were more significantly intruded and their root apex was more retracted in the AP-group. The long axis of the canine was well maintained in the AP-group. There were no differences in the steepness of occlusal plane and the incidence of alveolar bone loss or of root resorption during en masse retraction with the two retractors. Conclusions The clockwise bowing effect of the anterior segment was less with the APLR, which prevented unwanted canine movement.

Bone-anchored maxillary expansion and bilateral interoral mandibular distraction osteogenesis in adult with severe obstructive sleep apnea syndrome.

Science.gov (United States)

Nie, Ping; Zhu, Min; Lu, Xiao-Feng; Fang, Bing

2013-05-01

Severe obstructive sleep apnea syndrome (OSAS) threatens patients' lives. To solve ventilation problem, snoring, and avoid another orthognathic surgery for mandibular advancement, bone-anchored rapid maxillary expansion and bilateral interoral mandibular distraction osteogenesis were tried on a 20-year-old Chinese male patient with severe skeletal class II malocclusion and OSAS.The patient had polysomnography (apnea-hypopnea index 54.2), body mass index measurement (19.7 kg/m), and cephalometry before the treatment. Bone-anchored rapid maxillary expansion was performed for the correction of maxillary transverse and minor sagittal deficiency and the improvement of nasal airflow by decreasing nasal resistance. Bilateral interoral mandibular distraction osteogenesis was operated to lengthen the small, retruded mandible by 15 mm. Orthodontic treatment after the maxillary expansion and mandibular distraction osteogenesis can help obtain stable occlusion.The Epworth Sleepiness Scale, a questionnaire for temporomandibular joint, cephalometric analysis, polysomnography, acoustic rhinometry, and multislice spiral computed tomography were performed to evaluate changes from the treatment. All the results showed that the patient had a significantly alleviated OSAS. In addition, an acceptable occlusion was also obtained.

MAXILLARY GROWTH PATTERNS IN ROMANIAN CHILDREN WITH CLEFT PALATE DURING THE FIRST 6 YEARS OF LIFE

Directory of Open Access Journals (Sweden)

Liliana-Gabriela Halitchi

2012-12-01

Full Text Available In order to visualize, evaluate and measure the maxillary growth in patients with cleft palate and to identify the reactive morphological pattern that could be identified from the dimensional changes produced along the first six years of life, maxillary impressions were made in two groups of study, by means of standard trays and silicone impression materials. The maxillary casts resulted had been 3D scanned at Multinr, in Sf. Gheorghe. The study was carried on a number of 34 patients with cleft palate, 16 boys and 18 girls, with ages between 2 months and 6 years, operated by the same surgical team in “St. Mary” University Children Hospital of Iaşi, as well as on 60 normal children. Bivariate Student’s t test established statistically significant negative differences between the mean values of the anterior and posterior width of the maxillary alveolar arch, positive non significant differences for the length and positive differences for the depth of the dehiscent palate in the experimental group, comparatively with normal children. Cleft palate patients have narrowed and shorter maxillary alveolar arch and flattened palate. At least therapeutically, the cleft palate group, operated at different ages, from 2 to 4 years, could not react like other groups of study from important European Cleft Centers and benefit from a good residual growth.

Maxillary hematocele

International Nuclear Information System (INIS)

Inaba, Tsuyoshi; Fujimura, Takeyuki; Udaka, Tsuyoshi; Siomori, Teruo; Kadokawa, Yohei; Suzuki, Hideaki

2007-01-01

Hematocele is a benign hemorrhagic pseudotumor that preferably arises in the sinonasal tract, particularly in the maxillary sinus. The occurrence of maxillary hematocele has sporadically been documented, but its nature is not dearly understood. We herein report four cases of maxillary hematocele. The patients were 3 men and one woman, 30-62 years of age with an average of 49.8 years. Major symptoms were nasal obstruction (2 cases), nasal bleeding (2 cases), and toothache (1 case). Computed tomography demonstrated well-defined expansive soft tissue shadows with bone erosion. The lesions showed intermingled high/intermediate/low intensity in both T1- and T2-weighted magnetic resonance imaging. Endoscopic sinus surgery was performed in 3 cases, and the other patient underwent Caldwell-Luc procedure. Surgical specimens microscopically exhibited inflammatory changes with hematoma and fibrin deposition. The postoperative clinical course was uneventful in all cases, and all the patients are currently free from disease 4-25 months after surgery. Clinical, histopathological and radiological characteristics of maxillary hematocele are reviewed. (author)

Stress and displacement patterns in the craniofacial skeleton with rapid maxillary expansion—a finite element method study

Directory of Open Access Journals (Sweden)

J. Priyadarshini

2017-07-01

Full Text Available Abstract Background Rapid maxillary expansion (RME, indicated in the treatment of maxillary deficiency directs high forces to maxillary basal bone and to other adjacent skeletal bones. The aim of this study is to (i evaluate stress distribution along craniofacial sutures and (ii study the displacement of various craniofacial structures with rapid maxillary expansion therapy by using a Finite Element model. Methods An analytical model was developed from a dried human skull of a 12 year old male. CT scan images of the skull were taken in axial direction parallel to the F-H plane at 1 mm interval, processed using Mimics software, required portion of the skull was exported into stereo-lithography model. ANSYS software was used to solve the mathematical equation. Contour plots of the displacement and stresses were obtained from the results of the analysis performed. Results At Node 47005, maximum X-displacement was 5.073 mm corresponding to the incisal edge of the upper central incisor. At Node 3971, maximum negative Y-displacement was -0.86 mm which corresponds to the anterior zygomatic arch, indicating posterior movement of craniofacial complex. At Node 32324, maximum negative Z-displacement was -0.92 mm representing the anterior and deepest convex portion of the nasal septum; indicating downward displacement of structures medial to the area of force application. Conclusions Pyramidal displacement of maxilla was evident. Apex of pyramid faced the nasal bone and base was located on the oral side. Posterosuperior part of nasal cavity moved minimally in lateral direction and width of nasal cavity at the floor of the nose increased, there was downward and forward movement of maxilla with a tendency toward posterior rotation. Maximum von Mises stresses were found along midpalatal, pterygomaxillary, nasomaxillary and frontomaxillary sutures.

Evaluation of the maxillary sinus and adjacent structures on the orthopantomograph to the head positions

International Nuclear Information System (INIS)

Lee, Jin Kyung; Kim, Jae Duck

1992-01-01

The purpose of this study was to evaluate the utilization of the orthopantomogrph as a diagnostic aid to observe maxillary sinus and adjacent structures. For achieving this goal, the lead plates were attached to the five walls of the maxillary sinus of a human dry skull. The dry skull was placed in fourteen different positions ; standard, 20 mm forward, 20 mm backward, 10 degree upward, 10 degree downward, 20 mm lateral, forward and upward, forward and lateral, backward and upward, backward and downward, backward and lateral, upward and lateral, downward and lateral position. The obtained results were as follows: 1. The image of the medial wall was observed very differently according to the head positions. 2. The image of the anterior wall was observed at medial third to half of the maxillary sinus in each head position. 3. The image of the posterior wall was always observed at lateral third of the maxillary sinus in all head positions and more obviously in the downward-lateral position. 4. The image of the superior wall was observed at the inferior third to half of the orbit in each head position. 5. The image of the inferior wall was always observed at the inferior third of maxillary sinus in all head positions and observed more obviously in the standard and downward-lateral positions. 6. The image of the zygomatic process, zygomatic arch and zygomaticotemporal suture were observed very well in the downward-lateral position.

Finite element analysis of maxillary bone stress caused by Aramany Class IV obturator prostheses.

Science.gov (United States)

Miyashita, Elcio Ricardo; Mattos, Beatriz Silva Câmara; Noritomi, Pedro Yoshito; Navarro, Hamilton

2012-05-01

The retention of an Aramany Class IV removable partial dental prosthesis can be compromised by a lack of support. The biomechanics of this obturator prosthesis result in an unusual stress distribution on the residual maxillary bone. This study evaluated the biomechanics of an Aramany Class IV obturator prosthesis with finite element analysis and a digital 3-dimensional (3-D) model developed from a computed tomography scan; bone stress was evaluated according to the load placed on the prosthesis. A 3-D model of an Aramany Class IV maxillary resection and prosthesis was constructed. This model was used to develop a finite element mesh. A 120 N load was applied to the occlusal and incisal platforms corresponding to the prosthetic teeth. Qualitative analysis was based on the scale of maximum principal stress; values obtained through quantitative analysis were expressed in MPa. Under posterior load, tensile and compressive stresses were observed; the tensile stress was greater than the compressive stress, regardless of the bone region, and the greatest compressive stress was observed on the anterior palate near the midline. Under an anterior load, tensile stress was observed in all of the evaluated bone regions; the tensile stress was greater than the compressive stress, regardless of the bone region. The Aramany Class IV obturator prosthesis tended to rotate toward the surgical resection when subjected to posterior or anterior loads. The amount of tensile and compressive stress caused by the Aramany Class IV obturator prosthesis did not exceed the physiological limits of the maxillary bone tissue. (J Prosthet Dent 2012;107:336-342). Copyright © 2012 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Parascapular mass revealing primary tuberculosis of the posterior arch

Science.gov (United States)

Arbault, Anais; Ornetti, Paul; Chevallier, Olivier; Avril, Julien; Pottecher, Pierre

2016-01-01

We report the case of a parascapular abscess revealing primary tuberculosis of the posterior arch in a 31-year-old man. Sectional imaging is essential in order to detect the different lesions of this atypical spinal tuberculosis as osteolysis of the posterior arch extendible to vertebral body, osteocondensation, epidural extension which is common in this location, and high specificity of a zygapophysial, costo-vertebral or transverse arthritis. PMID:27709081

Maxillary Implant-Supported Fixed Prosthesis: A Survey of Reviews and Key Variables for Treatment Planning.

Science.gov (United States)

Gallucci, German O; Avrampou, Marianna; Taylor, James C; Elpers, Julie; Thalji, Ghadeer; Cooper, Lyndon F

2016-01-01

This review was conducted to provide information to support the establishment of clinical guidelines for the treatment of maxillary edentulism using implant-supported fixed dental prostheses. Initial efforts were directed toward a systematic review with a defined PICO question: "For maxillary edentulous patients with dental implants treated using a fixed prosthesis, what is the impact of prosthesis design on prosthesis survival and complications?" Following a title search of more than 3,000 titles identified by electronic search of PubMed, 180 articles were identified that addressed the clinical evaluation of maxillary dental implant prostheses. The broad methodologic heterogeneity and clinical variation among reports precluded this approach for a systematic review. The information was extracted using a standardized extraction table by two pairs of investigators, and the reported outcomes were then summarized according to reported outcomes for implant prostheses supported by four, six, or eight implants using unitary or segmented prostheses. This review indicated that high prosthetic survival is observed using all approaches. The advantages of using fewer implants and a unitary prosthesis are revealed in the surgical phases, and complications commonly involve the fracture or detachment of acrylic teeth and reduced access for proper oral hygiene and related biologic complications. Using six implants typically involved grafting of posterior regions with advantages of reduced cantilevers and redundancy of implant support. Reduced prosthesis survival in these cases was associated with poor implant distribution. Segmented prostheses supported by six or more implants offered greater prosthetic survival, perhaps due to posterior implant placement. Advantages of a segmented prosthesis included pragmatic issues of accommodating divergent implants, attaining passive fit, combining prosthetic materials, and relative simplicity of repair. The existing literature demonstrated

Adaptation and micro-structure of Co-Cr alloy maxillary complete denture base plates fabricated by selective laser melting technique.

Science.gov (United States)

Ye, Ye; Jiao, Ting; Zhu, Jiarui; Sun, Jian

2018-01-24

The purpose of the study was to evaluate the adaptation and micro-structure of Co-Cr alloy maxillary complete denture base plates fabricated by the selective laser melting (SLM) technique. Twenty pairs of edentulous casts were randomly and evenly divided into two groups, and manufacturing of the Co-Cr alloy maxillary complete denture base was conducted either by the SLM technique or by the conventional method. The base-cast sets were transversally sectioned into three sections at the distal canines, mesial of the first molars and the posterior palatal zone. The gap between the metal base and cast was measured in these three sections with a stereoscopic microscope, and the data were analysed using t tests. A total of five specimens of 5 mm diameter were fabricated with the Co-Cr alloy by SLM and the traditional casting technology. A scanning electron microscope (SEM) was used to evaluate the differences in microstructure between these specimens. There was no statistical difference between the three sections in all four groups (P > 0.05). At the region of the canines, the clearance value for the SLM Co-Cr alloy group was larger than that of the conventional method group (P  0.05). The SLM Co-Cr alloy has a denser microstructure behaviour and less casting defect than the cast Co-Cr alloy. The SLM technique showed initial feasibility for the manufacture of dental bases of complete dentures, but large sample studies are needed to prove its reliability in clinical applications. The mechanical properties and microstructure of the denture frameworks prepared by selective laser melting indicate that these dentures are appropriate for clinical use.

Maxillary Overdentures Supported by Anteriorly or Posteriorly Placed Implants Opposed by a Natural Dentition in the Mandible : A 1-Year Prospective Case Series Study

NARCIS (Netherlands)

Slot, Jan; Raghoebar, Gerry M.; Vissink, Arjan; Meijer, Henny J. A.

Background: For maxillary overdenture therapy, treatment guidelines are missing. There is a need for longitudinal studies. Purpose: The purpose of this 1-year prospective case series study was to assess the treatment outcome of maxillary overdentures supported by six dental implants opposed by

Cone-beam computed tomography evaluation of dentoskeletal changes after asymmetric rapid maxillary expansion.

Science.gov (United States)

Baka, Zeliha Muge; Akin, Mehmet; Ucar, Faruk Izzet; Ileri, Zehra

2015-01-01

The aims of this study were to quantitatively evaluate the changes in arch widths and buccolingual inclinations of the posterior teeth after asymmetric rapid maxillary expansion (ARME) and to compare the measurements between the crossbite and the noncrossbite sides with cone-beam computed tomography (CBCT). From our clinic archives, we selected the CBCT records of 30 patients with unilateral skeletal crossbite (13 boys, 14.2 ± 1.3 years old; 17 girls, 13.8 ± 1.3 years old) who underwent ARME treatment. A modified acrylic bonded rapid maxillary expansion appliance including an occlusal locking mechanism was used in all patients. CBCT records had been taken before ARME treatment and after a 3-month retention period. Fourteen angular and 80 linear measurements were taken for the maxilla and the mandible. Frontally clipped CBCT images were used for the evaluation. Paired sample and independent sample t tests were used for statistical comparisons. Comparisons of the before-treatment and after-retention measurements showed that the arch widths and buccolingual inclinations of the posterior teeth increased significantly on the crossbite side of the maxilla and on the noncrossbite side of the mandible (P ARME treatment, the crossbite side of the maxilla and the noncrossbite side of the mandible were more affected than were the opposite sides. Copyright © 2015. Published by Elsevier Inc.

Two cases of congenital defects within transverse processes of lumbar spine

International Nuclear Information System (INIS)

Malawski, S.; Sokolski, B.

1993-01-01

Two cases of congenital defects of transverse processes of lumbar spine causing lumbalgia are described. The first one was produced by direct contact of the elongated processes with subsequent pseudoarthrosis. Hypertrophied processes caused stenosis around intervertebral foramen and irritated posterior neural branch in the second case. Surgical resection of the hypertrophied transverse processes has brought the cure. (author)

Sinus lifting before Le Fort I maxillary osteotomy: a suitable method for oral rehabilitation of edentulous patients with skelettal class-III conditions: review of the literature and report of a case

Directory of Open Access Journals (Sweden)

Meyer Ulrich

2007-01-01

Full Text Available Abstract Background Functional rehabilitation of patients afflicted with severe mandibular and maxillary alveolar atrophy might be challenging especially in malformed patients. Methods Treatment planning using sinus lifting and implant placement before Le Fort I maxillary osteotomy in a patient with severe mandibular and posterior maxillary alveolar atrophy and skelettal class-III conditions due to cleft palate are described. Results A full functional and esthetic rehabilitation of the patient was achieved by a stepwise surgical approach performed through sinus lifting as the primary approach followed by implant placement and subsequent Le Fort I maxillary osteotomy to correct the maxillo-mandibular relation. Conclusion Stabilisation of the maxillary complex by a sinus lifting procedure in combination with computer aided implant placement as preorthodontic planning procedure before Le Fort I maxillary osteotomy seems to be suitable in order to allow ideal oral rehabilitation especially in malformed patients.

Periodontal and dental effects of surgically assisted rapid maxillary expansion, assessed by using digital study models

Science.gov (United States)

Siqueira, Danilo Furquim; Cardoso, Mauricio de Almeida; Capelozza, Leopoldino; Goldenberg, Dov Charles; Fernandes, Mariana dos Santos

2015-01-01

OBJECTIVE: The present study assessed the maxillary dental arch changes produced by surgically assisted rapid maxillary expansion (SARME). METHODS: Dental casts from 18 patients (mean age of 23.3 years) were obtained at treatment onset (T1), three months after SARME (T2) and 6 months after expansion (T3). The casts were scanned in a 3D scanner (D-250, 3Shape, Copenhagen, Denmark). Maxillary dental arch width, dental crown tipping and height were measured and assessed by ANOVA and Tukey's test. RESULTS: Increased transversal widths from T1 and T2 and the maintenance of these values from T2 and T3 were observed. Buccal teeth tipping also showed statistically significant differences, with an increase in all teeth from T1 to T2 and a decrease from T2 to T3. No statistically significant difference was found for dental crown height, except for left first and second molars, although clinically irrelevant. CONCLUSION: SARME proved to be an effective and stable procedure, with minimum periodontal hazards. PMID:26154457

Management of Cleft Maxillary Hypoplasia with Anterior Maxillary Distraction: Our Experience.

Science.gov (United States)

Chacko, Tojan; Vinod, Sankar; Mani, Varghese; George, Arun; Sivaprasad, K K

2014-12-01

Maxillary hypoplasia is a common developmental problem in cleft lip and palate deformities. Since 1970s these deformities have traditionally been corrected by means of orthognathic surgery. Management of skeletal deformities in the maxillofacial region has been an important challenge for maxillofacial surgeons and orthodontists. Distraction osteogenesis is a surgical technique that uses body's own repairing mechanisms for optimal reconstruction of the tissues. We present four cases of anterior maxillary distraction osteogenesis with tooth borne distraction device-Hyrax, which were analyzed retrospectively for the efficacy of the tooth borne device-Hyrax and skeletal stability of distracted anterior maxillary segment.

A case of myofibroblastic sarcoma in the maxillary region suspected to be radiation-induced

International Nuclear Information System (INIS)

Sato, Hisashi; Kobayashi, Wataru; Kurita, Takayuki; Narita, Kenji; Fukui, Roh; Kimura, Hiroto

2004-01-01

Myofibroblastic sarcoma is an extremely rare malignant tumor in the oral and maxillofacial region. We report a case of myofibroblastic sarcoma probably induced by irradiation for maxillary sinus cancer. The patient was a 61-year-old man whose present history was as follows. In October 1989, he presented with pain in the left maxillary molar region. A squamous cell carcinoma of the left maxillary sinus was diagnosed, and he was treated with external irradiation of 50 Gy combined with chemotherapy. Left maxillectomy was done in February 1990. The postoperative course was satisfactory. However, in June 1998, he presented again with a tumor arising in the posterior region of the defect on the left side of the maxilla. Although histopathological examination of a biopsy specimen revealed granulation tissue with inflammatory changes, the tumor grew rapidly. The tumor was therefore suspected to be malignant and was resected under general anesthesia. Histopathological examination revealed atypical and spindle tumor cells with immunohistochemically positive staining for α-smooth muscle actin, desmin, vimentin, and muscle specific actin, but negative staining for h-caldesmon. On the basis of these histopathological and clinical findings, a final diagnosis of a myofibroblastic sarcoma of the maxillary region was made. The lesion was strongly suspected to be a radiation-induced tumor. The patient was followed up for 4 years 5 months after operation. The subsequent course was satisfactory, with no signs of recurrence or distant metastasis. (author)

Positional relationship between the maxillary sinus floor and the apex of the maxillary first molar using cone beam computed tomograph

International Nuclear Information System (INIS)

Kim, Kyung Hwa; Koh, Kwang Joon

2008-01-01

To assess the positional relationship between the maxillary sinus floor and the apex of the maxillary first molar using cone beam computed tomograph (CBCT). CBCTs from 127 subjects were analysed. A total of 134 maxillary first molars were classified according to their vertical and horizontal positional relationship to the maxillary sinus floor and measured according to the distance between the maxillary sinus floor and the maxillary first molar. Type III (The root projected laterally on the sinus cavity but its apex is outside the sinus boundaries) was dominated between 10 and 19 years and type I (The root apex was not in contact with the cortical borders of the sinus) was dominated (P<0.05) between 20 and 72 years on the vertical relationship between the maxillary sinus floor and the apex of the maxillary first molar. The maxillary sinus floor was located more at the apex (78.2%) than at the furcation (21.3%) for the palatal root. The distance from the root apex to the maxillary sinus floor confined to type I was increased according to the ages (P<0.05). Type M (The maxillary sinus floor was located between the buccal and the palatal root) was most common (72.4%) on the horizontal relationship between the maxillary sinus floor and the apex of the maxillary first molar. CBCT can provide highly qualified images for the maxillary sinus floor and the root apex of the maxillary first molar.

Van der Woude syndrome: Management in the mixed dentition

Directory of Open Access Journals (Sweden)

Sonahita Agarwal

2013-01-01

Full Text Available This article presents the case of a patient with Van der Woude syndrome treated with orthodontic and orthopedic intervention in the mixed dentition stage. The patient had a bilateral cleft of the lip and alveolus accompanied by lip pits on the lower lip. Intra-orally, there was bilateral anterior and posterior cross-bite with a collapsed maxilla. The maxillary transverse deficiency was managed with orthopedic expansion and the second phase of treatment involved secondary alveolar bone grafting followed by retention with functional regulator-3. The mild maxillary retrognathia and deficient lip support was managed with dental compensation.

Van der Woude syndrome: Management in the mixed dentition.

Science.gov (United States)

Agarwal, Sonahita; Dinesh, M R; Dharma, R M; Amarnath, B C

2013-01-01

This article presents the case of a patient with Van der Woude syndrome treated with orthodontic and orthopedic intervention in the mixed dentition stage. The patient had a bilateral cleft of the lip and alveolus accompanied by lip pits on the lower lip. Intra-orally, there was bilateral anterior and posterior cross-bite with a collapsed maxilla. The maxillary transverse deficiency was managed with orthopedic expansion and the second phase of treatment involved secondary alveolar bone grafting followed by retention with functional regulator-3. The mild maxillary retrognathia and deficient lip support was managed with dental compensation.

Maxillary Sinus Floor Augmentation

DEFF Research Database (Denmark)

Starch-Jensen, Thomas; Jensen, Janek Dalsgaard

2017-01-01

, radiological and histomorphometric outcome as well as complications are presented after maxillary sinus floor augmentation applying the lateral window technique with a graft material, maxillary sinus membrane elevation without a graft material and osteotome-mediated sinus floor elevation with or without...

Má oclusão Classe III, com mordida cruzada posterior unilateral e assimetria facial Class III malocclusion with unilateral posterior crossbite and facial asymmetry

Directory of Open Access Journals (Sweden)

Silvio Rosan de Oliveira

2010-10-01

Full Text Available Este artigo relata o tratamento ortodôntico realizado em uma paciente adulta, com 36 anos de idade, portadora de um padrão esquelético e dentário de Classe III, com mordida cruzada posterior unilateral esquerda e assimetria mandibular, além de uma diferença relativamente grande entre máxima intercuspidação habitual (MIH e relação cêntrica (RC. O tratamento foi realizado com expansão dentária superior, contração dentária inferior e descruzamento anterior, eliminando a diferença entre MIH e RC. O resultado obtido foi pautado sobre um diagnóstico criterioso e um planejamento de compensação ortodôntica, sem intervenção cirúrgica nos maxilares, por solicitação da paciente. Este caso foi apresentado à Diretoria do Board Brasileiro de Ortodontia e Ortopedia Facial (BBO, representando a categoria 5, ou seja, má oclusão com problema transverso, apresentando pelo menos um quadrante em cruzamento, como parte dos requisitos para obtenção do título de Diplomado pelo BBO.This article reports on the orthodontic treatment performed on a 36-year-old female patient with skeletal and dental Class III pattern, presenting with a left unilateral posterior crossbite and mandibular asymmetry, and a relatively significant difference between maximum intercuspation (MIC and centric relation (CR. The treatment was performed with maxillary dental expansion, mandibular dental contraction and anterior crossbite correction, eliminating the difference between MIC and CR. Results were based on careful diagnosis and planning of orthodontic compensation without surgical intervention in the maxilla, at the request of the patient. This case was presented to the Brazilian Board of Orthodontics and Facial Orthopedics (BBO as representative of Category 5, i.e., malocclusion with a transverse problem, presenting with a crossbite in at least one of the quadrants, as part of the requirements for obtaining the BBO Certificate.

Alteration of maxillary and mandibular growth of adult patients with unoperated isolated cleft palate.

Science.gov (United States)

Yang, Yunqiang; Wu, Yeke; Gu, Yifei; Yang, Qijian; Shi, Bing; Zheng, Qian; Wang, Yan

2013-07-01

The objective of this study was to investigate the effects of cleft palate itself on the growth of maxilla and mandible. Fifty-two adult female patients with unoperated isolated cleft palate and 52 adult female individuals with normal occlusion were included in our study. Computer software was used for lateral cephalometry measurement. Manual measurement was performed for dental cast measurements, and sample t test analysis was applied to analyze the differences between the 2 groups using SPSS 17.0. The sella-nasion-subspinale point angle, subspinale-nasion-supramentale point angle, and maxillary arch length of the cleft group were significantly smaller than those of the control group (P cleft group were significantly larger compared with the control group (P palate height, and palate shelf inclination did not differ between the 2 groups. The measurements did not differ between the submucosal cleft and the overt cleft patients. Cleft palate itself has adverse effects on the maxilla growth with shorter maxillary arch length and wider posterior dental arch width.

Maxillary "All-On-Four" treatment using zygomatic implants. A mechanical analysis.

Science.gov (United States)

de Moraes, P H; Olate, S; Nóbilo, M de Arruda; Asprino, L; de Moraes, M; Barbosa, J de Albergaría

2016-04-01

Zygomatic implants may be used for dental rehabilitation in atrophic maxillae. The aim of this study was to establish experimentally the areas of stress distribution using 2 kinds of "All-On-Four" maxillary procedures. The best position to insert the implants was selected using polyurethane craniomaxillary models and surgical guides were made. Group 1 was designed with two posterior zygomatic implants and two conventional anterior implants, and group 2 with two posterior zygomatic implants and two anterior zygomatic implants. A titanium bar was built to link the 4 implants in both groups. Photoelastic replicas of these models were made and the implants were inserted using the surgical guides. An Instrom 4411 testing machine was used to perform a unilateral compressive loading at the level of the right first molar until 2mm of displacement was obtained. Group 1 showed a high strain concentration in the right lateral orbital region at the level of the apex of the zygomatic implant. Less strain was noticed at the apical levels of the conventional implants in the anterior sector and of the contralateral zygomatic implant. Group 2 showed high strains in the lateral inferior orbital area. The load was low in the alveolar bone sector. Zygomatic bone and paranasal structures are loaded at high levels when zygomatic implants are used to stabilize a full maxillary prosthodontic rehabilitation on 4 implants. The use of 4 zygomatic implants loads the alveolar bone to a lower extent and seems better suited from a mechanical point of view than the use of 2 zygomatic implants. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Vector alignment in maxillary distraction osteogenesis.

Science.gov (United States)

Uckan, Sina; Arman, Ayca; Bayram, Burak; Celik, Erkan

2006-09-01

Maxillary distraction osteogenesis is an alternative treatment of cleft patients with severe maxillary hypoplasia. The aim of this paper is to present the combined surgical/orthodontic treatment of a cleft lip and palate patient and to evaluate the maxillary distraction procedure and the distraction vector in high Le Fort I osteotomy.

A multidisciplinary treatment of congenitally missing maxillary lateral incisors: a 14-year follow-up case report

Directory of Open Access Journals (Sweden)

Renato Rodrigues de ALMEIDA

2014-10-01

Full Text Available Absence of the maxillary lateral incisor creates an aesthetic problem which can be managed in various ways. The condition requires careful treatment planning and consideration of the options and outcomes following either space closure or prosthetic replacement. Recent developments in restorative dentistry have warranted a re-evaluation of the approach to this clinical situation. Factors relating both to the patient and the teeth, including the presentation of malocclusion and the effect on the occlusion must be considered. The objective of this study was to describe the etiology, prevalence and alternative treatment modalities for dental agenesis and to present a clinical case of agenesis of the maxillary lateral incisors treated by the closure of excessive spaces and canine re-anatomization. A clinical case is presented to illustrate the interdisciplinary approach between orthodontics and restorative dentistry for improved esthetic results. In this report, the treatment of a girl with a Class II malocclusion of molars and canines with missing maxillary lateral incisors and convex facial profile is shown. Treatment was successfully achieved and included the space closure of the areas corresponding to the missing upper lateral incisors, through movement of the canines and the posterior teeth to mesial by fixed appliances as well as the canines transformation in the maxillary lateral incisors. This is a 14-year follow-up case report involving orthodontics and restorative dentistry in which pretreatment, posttreatment, and long-term follow-up records for the patient are presented.

A multidisciplinary treatment of congenitally missing maxillary lateral incisors: a 14-year follow-up case report

Science.gov (United States)

de ALMEIDA, Renato Rodrigues; MORANDINI, Ana Carolina Faria; de ALMEIDA-PEDRIN, Renata Rodrigues; de ALMEIDA, Marcio Rodrigues; CASTRO, Renata Cristina Faria Ribeiro; INSABRALDE, Natalia Martins

2014-01-01

Absence of the maxillary lateral incisor creates an aesthetic problem which can be managed in various ways. The condition requires careful treatment planning and consideration of the options and outcomes following either space closure or prosthetic replacement. Recent developments in restorative dentistry have warranted a re-evaluation of the approach to this clinical situation. Factors relating both to the patient and the teeth, including the presentation of malocclusion and the effect on the occlusion must be considered. The objective of this study was to describe the etiology, prevalence and alternative treatment modalities for dental agenesis and to present a clinical case of agenesis of the maxillary lateral incisors treated by the closure of excessive spaces and canine re-anatomization. A clinical case is presented to illustrate the interdisciplinary approach between orthodontics and restorative dentistry for improved esthetic results. In this report, the treatment of a girl with a Class II malocclusion of molars and canines with missing maxillary lateral incisors and convex facial profile is shown. Treatment was successfully achieved and included the space closure of the areas corresponding to the missing upper lateral incisors, through movement of the canines and the posterior teeth to mesial by fixed appliances as well as the canines transformation in the maxillary lateral incisors. This is a 14-year follow-up case report involving orthodontics and restorative dentistry in which pretreatment, post-treatment, and long-term follow-up records for the patient are presented. PMID:25466480

Avaliação clínica dos procedimentos de expansão cirurgicamente assistida da maxila (ECAM Clinical evaluation of surgically assisted maxillary expansion (SAME

Directory of Open Access Journals (Sweden)

Paulo Domingos Ribeiro Jr.

2006-02-01

Full Text Available OBJETIVO: avaliação clínica dos procedimentos de expansão cirurgicamente assistida da maxila. METODOLOGIA: foram avaliados 10 pacientes tratados através da expansão ortopédica com auxílio cirúrgico, conhecida como expansão cirurgicamente assistida da maxila (ECAM. Avaliou-se a efetividade deste procedimento cirúrgico no auxílio à expansão transversal da maxila proporcionada através de aparelho do tipo Hyrax, a estabilidade desta expansão, as ocorrências pós-operatórias, a quantidade e qualidade da expansão conseguida e alterações estéticas deste procedimento. RESULTADOS E CONCLUSÕES: concluiu-se, com um acompanhamento a longo prazo, que a ECAM trata-se de um procedimento eficiente, estável, que proporciona mudanças funcionais e pouca alteração estética facial.AIM: clinical evaluation of surgically assisted maxillary expansion. METHODS: the present study evaluated 10 patients who underwent surgically assisted maxillary expansion. The efficacy of the surgical procedure helping transverse maxillary expansion given by the Hyrax, expansion stability, post-operatory discomfort during the activation of the device, the quantity and quality of the expansion achieved, the age of the patients, nasal base alteration, and nasal breathing were analyzed. RESULTS AND CONCLUSIONS: from the results, it was possible to observe that surgically assisted maxillary expansion is an efficient and stable treatment, which offers functional changes and minimal aesthetic alterations.

Keratocystic odontogenic tumor with impacted maxillary third molar involving the right maxillary antrum:An unusual case report

Directory of Open Access Journals (Sweden)

Abhishek Gupta

2011-01-01

Full Text Available The odontogenic keratocyst (OKC, first described by Phillipsen in 1956, has metamorphosized as a keratocystic odontogenic tumor (KCOT as reported in WHO classification of head and neck tumors in 2005. KCOT is a benign intraosseous neoplasm of the jaw and its occurrence in maxilla is unusual and its appearance in maxillary antrum along with maxillary impacted third molar is very uncommon. This article reports a case of KCOT associated with impacted maxillary third molar in right maxillary antrum and describes its rare site of occurrence.

A prospective randomized controlled trial of the two-window technique without membrane versus the solo-window technique with membrane over the osteotomy window for maxillary sinus augmentation.

Science.gov (United States)

Yu, Huajie; He, Danqing; Qiu, Lixin

2017-12-01

Maturation of the grafted volume after lateral sinus elevation is crucial for the long-term survival of dental implants. To compare endo-sinus histomorphometric bone formation between the solo- and two-window maxillary sinus augmentation techniques with or without membrane coverage for the rehabilitation of multiple missing posterior teeth. Patients with severely atrophic posterior maxillae were randomized to receive lateral sinus floor elevation via the solo-window technique with membrane coverage (Control Group) or the two-window technique without coverage (Test Group). Six months after surgery, bone core specimens harvested from the lateral aspect were histomorphometrically analyzed. Ten patients in each group underwent 21 maxillary sinus augmentations. Histomorphometric analysis revealed mean newly formed bone values of 26.08 ± 16.23% and 27.14 ± 18.11%, mean connective tissue values of 59.34 ± 12.42% and 50.03 ± 17.13%, and mean residual graft material values of 14.6 ± 14.56% and 22.78 ± 10.83% in the Test and Control Groups, respectively, with no significant differences. The two-window technique obtained comparative maturation of the grafted volume even without membrane coverage, and is a viable alternative for the rehabilitation of severely atrophic posterior maxillae with multiple missing posterior teeth. © 2017 Wiley Periodicals, Inc.

Maxillary advancement using distraction osteogenesis with intraoral device.

Science.gov (United States)

Takigawa, Yoko; Uematsu, Setsuko; Takada, Kenji

2010-11-01

This article describes the surgical orthodontic treatment of maxillary hypoplasia in a patient with cleft lip and palate using maxillary distraction osteogenesis with internal maxillary distractors. Maxillary advancement was performed to correct the retrusive maxillary facial profile and Class III malocclusion. Rotational movement of the distraction segment was made to correct the upper dental midline. Although maxillary advancement was insufficient because of unexpected breakage of the intraoral distractor after completion of the distraction, skeletal traction with a face mask compensated for the shortage. Successful esthetic improvement and posttreatment occlusal stability were achieved with no discernible relapse after 2 years of retention.

Maxillary sinus floor elevation surgery with BioOss (R) mixed with a bone marrow concentrate or autogenous bone : test of principle on implant survival and clinical performance

NARCIS (Netherlands)

Rickert, D.; Vissink, A.; Slot, Jan; Sauerbier, S.; Meijer, H. J. A.; Raghoebar, G. M.

The purpose of this study was to assess implant survival and 1-year clinical performance of implants placed in the posterior maxilla that had been subjected to maxillary sinus floor elevation surgery with bovine bone mineral (BioOss (R)) mixed with autogenous bone marrow concentrate or autogenous

Stress and displacement pattern evaluation using two different palatal expanders in unilateral cleft lip and palate: a three-dimensional finite element analysis.

Science.gov (United States)

Mathew, Anoop; Nagachandran, K S; Vijayalakshmi, Devaki

2016-12-01

In this finite element (FE) study, the stress distribution and displacement pattern was evaluated in the mid-palatal area and around circum-maxillary sutures exerted by bone-borne palatal expander (BBPE) in comparison with conventional HYRAX rapid palatal expander in unilateral cleft lip and palate. Computed tomography scan images of a patient with unilateral cleft palate was used to create a FE model of the maxillary bone along with circum-maxillary sutures. A three-dimensional model of the conventional HYRAX (Hygienic Rapid Expander) expander and custom-made BBPE was created by laser scanning and programmed into the FE model. With the BBPE, the maximum stress was observed at the implant insertion site, whereas with the conventional HYRAX expander, it was at the dentition level. Among the circum-maxillary sutures, the zygomaticomaxillary suture experienced maximum stress followed by the zygomaticotemporal and nasomaxillary sutures. Displacement in the X-axis (transverse) was highest on the cleft side, and in the Y-axis (antero-posterior), it was highest in the posterior region in the BBPE. The total displacement was observed maximum in the mid-palatal cleft area in the BBPE, and it produced true skeletal expansion at the alveolar level without any dental tipping when compared with the conventional HYRAX expander.

Stress and displacement pattern evaluation using two different palatal expanders in unilateral cleft lip and palate: a three-dimensional finite element analysis

Directory of Open Access Journals (Sweden)

Anoop Mathew

2016-11-01

Full Text Available Abstract Background In this finite element (FE study, the stress distribution and displacement pattern was evaluated in the mid-palatal area and around circum-maxillary sutures exerted by bone-borne palatal expander (BBPE in comparison with conventional HYRAX rapid palatal expander in unilateral cleft lip and palate. Methods Computed tomography scan images of a patient with unilateral cleft palate was used to create a FE model of the maxillary bone along with circum-maxillary sutures. A three-dimensional model of the conventional HYRAX (Hygienic Rapid Expander expander and custom-made BBPE was created by laser scanning and programmed into the FE model. Results With the BBPE, the maximum stress was observed at the implant insertion site, whereas with the conventional HYRAX expander, it was at the dentition level. Among the circum-maxillary sutures, the zygomaticomaxillary suture experienced maximum stress followed by the zygomaticotemporal and nasomaxillary sutures. Displacement in the X-axis (transverse was highest on the cleft side, and in the Y-axis (antero-posterior, it was highest in the posterior region in the BBPE. Conclusions The total displacement was observed maximum in the mid-palatal cleft area in the BBPE, and it produced true skeletal expansion at the alveolar level without any dental tipping when compared with the conventional HYRAX expander.

Maxillary Anterior Segmental Distraction Osteogenesis to Correct Maxillary Deficiencies in a Patient With Cleft Lip and Palate.

Science.gov (United States)

Kageyama-Iwata, Asuka; Haraguchi, Seiji; Iida, Seiji; Aikawa, Tomonao; Yamashiro, Takashi

2017-07-01

This report describes a case of successful orthodontic treatment using maxillary anterior segmental distraction osteogenesis with an internal maxillary distractor and bilateral sagittal split ramus osteotomy in a girl with cleft lip and palate. A 16-year-old girl with unilateral cleft lip and palate exhibited midface retrusion because of growth inhibition of the maxillary complex and mandibular excess. After the presurgical orthodontic treatment, 6.0-mm advancement of the maxillary anterior segment and 4.0-mm set back of the mandible were performed. After a retention period, the patient's midface convexity was greatly improved and the velopharyngeal competence was preserved without relapse.

Reconstruction of maxillary cemento-ossifying fibroma defect with buccal pad of fat.

Science.gov (United States)

Sivaraj, Subramonian; Jeevadhas, Pratheep

2013-07-01

A cemento-ossifying fibroma (COF) is a rare benign neoplasm of maxilla when compared with mandible (World Health Organization, 1992). COF of maxilla may be quite large and locally very aggressive lesion. These tumor mass was peeled out by en-bloc excision using gentle blunt dissection. This paper presents 35-year-old male patient who had a gradually expanding lobular mass in the left maxillary posterior region for past 1 year. He has been treated successfully by surgical en-bloc resection. Various techniques were used to reconstruction the defect. Buccal pad of fat is a simple technique having advantages like good vascularity, adaptability, good closure of the defect with favorable prognosis.

Benign neurilemmoma in the infratemporal fossa involving maxillary sinus and pterygopalatine fossa

Energy Technology Data Exchange (ETDEWEB)

Choi, Jin Woo; Heo, Min Suk; Lee, Jin Koo; Yi, Won Jin; Lee, Sam Sun; Choi, Soon Chul [Seoul National University College of Medicine, Seoul (Korea, Republic of); An, Chang Hyeon [Kyungpook National University College of Medicine, Daegu (Korea, Republic of)

2004-12-15

Neurilemmoma is a benign tumor of the nerve sheath that arises on cranial and spinal nerve roots as well as along the course of peripheral nerves. A case of a neurilemmoma that arose in the left infratemporal fossa of a 29- year-old male was presented. Plain radiographs, enhanced computed tomography scan, and magnetic resonance imaging demonstrated a large, well-circumscribed, heterogeneously enhanced mass with extension into the pterygopalatine fossa. Displaced by the large mass, bowing-in of the posterior maxillary antral wall was noted and a provisional diagnosis of a benign soft tissue tumor was made. The mass was completely excised and a diagnosis of neurilemmoma was confirmed.

A Radiologic Study of the Relationship of the Maxillary Sinus Floor and Apex of the Maxillary Molar

International Nuclear Information System (INIS)

Yoon, Hae Rym; Park, Chang Seo

1998-01-01

In this study, radiographic evaluation was made using panoramic radiography and cross-sectional tomography of SCANORA in male and female adults in their 20 s on the relationship between the maxillary sinus floor and the apex of the maxillary molar, to test the accuracy and effectiveness of the cross-sectional tomography, and to use this information in the assessment of preop, and postop, root canal treatment, apical surgery, extraction and implantology. Forty-one adults with an average age of 24.4 years were studied panoramic radiography and cross-sectional tomography. In panoramic view and cross-sectional view, the position of the apices of maxillary molars were classified as separated, contacted, or protruded type; the general shape of the maxillary sinus floor was evaluated horizontally and vertically from cross-sectional tomography. The accuracy of each radiography was tested using maxilla from 5 fresh cadavers from the Anatomy Lab at Yonsei University Dental College, and panoramic view and cross-sectional tomography were taken in the same condition as with the patients. The results were as follows ; 1. Panoramic view and cross-sectional view were taken in the maxilla specimen, and the actual distance between the maxillary sinus floor and the tooth apices were measured in the specimen; the median values of the distance from the tooth apices to the maxillary sinus floor in the panoramic view, cross-sectional view and in the accrual maxilla specimen were 2.83 mm, 4.51 mm, and 4.15 mm, respectively. In the cross-sectional view, the measured distance was close to the actual distance but in the panoramic view, the measured distance was far from the actual distance. 2. When the results of the panoramic view and cross-sectional view were compared, 40.5% of the results agreed with each other in the two radiographic methods and buccal roots of the 2nd molar were the closest to the maxillary sinus floor in the cross-sectional tomography.3. In cross-sectional view, when

Alveolar bone changes after rapid maxillary expansion with tooth-born appliances: a systematic review.

Science.gov (United States)

Lo Giudice, Antonino; Barbato, Ersilia; Cosentino, Leandro; Ferraro, Claudia Maria; Leonardi, Rosalia

2017-08-10

During rapid maxillary expansion (RME), heavy forces are transmitted to the maxilla by the anchored teeth causing buccal inclination and buccal bone loss of posterior teeth. To systematically review the literature in order to investigate whether RME causes periodontal sequelae, assessed by cone-beam computed tomography (CBCT). Fifteen electronic databases and reference lists of studies were searched up to March 2017. To be included in the systematic review, articles must be human studies on growing subjects, with transversal maxillary deficiency treated with RME and with assessment of buccal bone loss by CBCT images. Only randomized and non-randomized trials were included. Two authors independently performed study selection, data extraction, and risk of bias assessment. Study characteristics (study design, sample size, age, sex, skeletal maturity, type of appliance, daily activation, evaluated linear measurements, observation period, CBCT settings), and study outcomes (loss of buccal bone thickness and marginal bone) were reported according to the PRISMA statement. On the basis of the applied inclusion criteria, only six articles, three randomized clinical trials and three controlled clinical trials were included. An individual analysis of the selected articles was undertaken. The risks of bias of the six trials were scored as medium to low. The results of the present systematic review are based on a limited number of studies and only one study included a control group. In all considered studies, significant loss of buccal bone thickness and marginal bone level were observed in anchored teeth, following RME. Further prospective studies correlating the radiological data of bone loss to the periodontal soft tissues reaction after RME are required. A preliminary evaluation of the patient-related risk factors for RR may be advisable when considering to administering RME. This systematic review was registered in the National Institute of Health Research database with an

Crecimiento maxilar según severidad de hendidura labial, alveolar y palatina unilateral Maxillary growth according to the severity of unilateral cleft lip and palate

Directory of Open Access Journals (Sweden)

M.C. Navas-Aparicio

2012-12-01

ón de crecimiento anterior del maxilar. Como conclusión, la asimetría transversal del arco maxilar fue el hallazgo más importante en este estudio. Se debe realizar un nueva investigación con respecto a la dimensión transversal del maxilar en niños con labio y paladar hendido, ya que existe una alteración de la misma. La posición anterior del maxilar y la longitud del maxilar no estuvieron influenciadas por la severidad de la hendidura. Es importante considerar que el crecimiento maxilar puede estar afectado por factores individuales, tales como el patrón facial genético. De igual manera, deberá efectuarse también un nueva medición hasta que el crecimiento de la cara haya finalizado.The inhibition of the growth and development resulting of a surgical treatment in patients with cleft lip and palate is a widely discussed topic in the world. According to literature, tissue deficiency, probably due to the cleft width and position of the alveolar segments, is a considerable variable that affects the growth of the maxilla, which is also influenced by the surgical correction of the lip, the nose and the palate by scarring, types of surgical treatment, time of the surgery, surgeon skills and pre-surgical orthopedics. The purpose of this study was to determine the possible associations between the severity of cleft and maxillary growth in patients with non-syndromic unilateral cleft lip and palate, who were born in 2001 and treated at the Hospital Nacional de Niños "Dr. Carlos Sáenz Herrera", Caja Costarricense de Seguro Social, San José, Costa Rica. The study was retrospective and descriptive, based on data obtained from medical records, initial maxillary study casts of the newborn child, cephalometric radiograph and the present study casts of the child at the age of 5 years. The study sample comprised of 13 patients. The maxillary transverse arch of 12 cases was asymmetric, indicating an alteration of growth in this direction. There is a statistically

Changes in speech following maxillary distraction osteogenesis.

Science.gov (United States)

Guyette, T W; Polley, J W; Figueroa, A; Smith, B E

2001-05-01

The purpose of this study was to describe changes in articulation and velopharyngeal function following maxillary distraction osteogenesis. This is a descriptive, post hoc clinical report comparing the performance of patients before and after maxillary distraction. The independent variable was maxillary distraction while the dependent variables were resonance, articulation errors, and velopharyngeal function. The data were collected at a tertiary health care center in Chicago. The data from pre- and postoperative evaluations of 18 maxillary distraction patients were used. The outcome measures were severity of hypernasality and hyponasality, velopharyngeal orifice size as estimated using the pressure-flow technique, and number and type of articulation errors. At the long-term follow-up, 16.7% exhibited a significant increase in hypernasality. Seventy-five percent of patients with preoperative hyponasality experienced improved nasal resonance. Articulation improved in 67% of patients by the 1-year follow-up. In a predominately cleft palate population, the risk for velopharyngeal insufficiency following maxillary distraction is similar to the risk observed in Le Fort I maxillary advancement. Patients being considered for maxillary distraction surgery should receive pre- and postoperative speech evaluations and be counseled about risks for changes in their speech.

Blood-flow change and recovery of sensibility in the maxillary dental pulp during and after maxillary distraction: a pilot study.

Science.gov (United States)

Harada, Kiyoshi; Sato, Masaru; Omura, Ken

2004-11-01

To examine the change in blood flow and recovery of sensibility in the maxillary dental pulp during and after maxillary distraction. The subjects included 5 patients undergoing high Le Fort I osteotomy and maxillary distraction (D-group) and a reference group of 14 patients who underwent a common single-segment Le Fort I osteotomy, 1-stage maxillary advancement, and mandibular setback surgery (C-group). Eleven (D-group) and 54 (C-group) maxillary incisors were assessed preoperatively and at 1-7 days, 14 days, and 3 months postoperatively. Pulpal blood flow (PBF) was measured by laser Doppler flowmetry, and pulpal sensibility (PS) was investigated by electrodiagnostics. From postoperative days 1 to 5 (the latency period), the PBF tended to be higher in the D-group than in the C-group. From day 6 to 3 months postoperatively (during and after maxillary distraction), the PBF values of the 2 groups were similar. The PS remained negative up to 14 days postoperatively in both groups. However, at 3 months after the operation, a higher proportion (90.9%) of teeth in the D-group was positive for PS. These results suggest that maxillary distraction is a favorable technique for maintenance of PBF and recovery of PS in the maxillary teeth after surgery.

CT-MPR invaluable in diagnosing odontogenic maxillary sinusitis

International Nuclear Information System (INIS)

Aoki, Hideaki; Shimazu, Kaoru; Kamada, Morito; Shiroyama, Akihiro; Mouri, Daisuke; Yamashita, Masashi; Kawasaki, Yasunori; Koseki, Takakazu; Mouri, Manabu

2001-01-01

In everyday examination, it is usual to encounter odontogenic maxillary sinusitis patients. Odontogenic maxillary sinusitis is generally best diagnosed by dental X-ray imaging. Many medical facilities not having a dental X-ray unit use coronal computed tomography (CT) images to diagnose odontogenic maxillary sinusitis. Coronal CT imaging causes artifacts, however due to dental prosthesises. Computed tomography-Multiplanar reformation (CT-MPR) imaging has proved useful in evaluating the paranasal sinus because it is not influenced by dental prosthesises. We evaluated the usefulness of CT-MPR for diagnosing odontogenic maxillary sinusitis by retrospectively analyzing 16 patients, with the following results. We couldn't diagnose all cases of odontogenic maxillary sinusitis in posteroanterior and Waters projection images. Panoramic radiography is needed to diagnose odontogenic maxillary sinusitis. Dental X-ray imaging missed some cases, but all cases were diagnosed by CT-MPR imaging, giving a 100% diagnosestic rate. CT-MPR imaging is thus at least as valuable or better than dental X-ray imaging in diagnosing odontogenic maxillary sinusitis. (author)

The influence of resilient liner and clip attachments for bar-implant-retained mandibular overdentures on opposing maxillary ridge. A 5-year randomised clinical trial.

Science.gov (United States)

Elsyad, M A; Ashmawy, T M; Faramawy, A G

2014-01-01

This study aimed to compare the influence of resilient liner and clip attachments for bar-implant-retained mandibular overdentures on opposing maxillary ridge after 5 years of denture wearing. Thirty edentulous male patients (mean age 62·5 years) received two implants in the anterior mandible after being allocated into two equal groups using balanced randomisation. After 3 months, implants were connected with resilient bars. New maxillary complete dentures were then constructed, and mandibular overdentures were retained to the bars with either clips (group I, GI) or silicone resilient liners (group II, GII). The prosthetic and soft tissue complications of the maxillary dentures were recorded 6 months (T6 m ), 1 year (T1), 3 years (T3) and 5 years (T5) after overdenture insertion. Traced rotational tomograms were used for measurements of maxillary alveolar bone loss. The proportional value between bone areas and areas of reference not subject to resorption was expressed as a ratio (R). Change in R immediately before (T0) and after 5 years (T5) of overdenture insertion was calculated. Maxillary denture relining times and frequency of flabby anterior maxillary ridge occurred significantly more often in GI compared with GII. The change of R in anterior part of maxilla was significantly higher than change of R in posterior part in both groups. GI showed significant resorption of anterior residual ridge compared with GII. Relining times and frequencies of flabby ridge were significantly correlated with change in R. Within the limitations of this study, resilient liner attachments for bar-implant-retained mandibular overdentures are associated with decreased resorption and flabbiness of maxillary anterior residual ridge and fewer maxillary denture relining times when compared with clip attachments. © 2013 John Wiley & Sons Ltd.

A new palatal distractor device for bodily movement of maxillary bones by rigid self-locking miniplates and screws system.

Science.gov (United States)

Cortese, Antonio; Savastano, Mauro; Cantone, Antonio; Claudio, Pier Paolo

2013-07-01

A new palatal distractor device for bodily movement of the maxillary bones after complete segmented Le Fort I osteotomy for 1-stage transversal distraction and tridimensional repositioning on 1 patient is presented. The new distractor has an intrinsic tridimensional rigidity also in the fixation system by self-locking miniplates and screws for better control of the 2 maxillary fragments during distraction. Le Fort I distraction and repositioning procedure in association with a bilateral sagittal split osteotomy were performed on 1 patient with complete solution of the cross-bite and class III malocclusion. Results of dental and cephalometric analysis performed before surgery (T1), after surgery and distraction time (T2), and 18 months after surgery and orthodontic appliance removal (T3) are reported. No complications were encountered using the new distractor device. Advantages of this device and technique are presented including improved rigidity of both distraction (jackscrew) and fixation (4 self-locking miniplates and screws) systems resulting in complete control of the position of the 2 maxillary fragments during distraction and surgery. In addition, this new device allows resuming palatal distraction in the event of cross-bite relapse without causing dental-related problems or the risks of screw slackening.

Morphological evaluation of changes in velopharyngeal function following maxillary distraction in patients with repaired cleft palate during mixed dentition.

Science.gov (United States)

Satoh, Koichi; Nagata, Junko; Shomura, Kenji; Wada, Takeshi; Tachimura, Takashi; Fukuda, Jinichi; Shiba, Ryosuke

2004-07-01

To describe the morphological changes of nasopharyngeal components after maxillary distraction and clarify whether the morphological characteristics are related to velopharyngeal function (VPF). Perceptual judgments of hypernasality and nasendoscopy were performed before and after treatment. Lateral cephalograms were obtained to describe the morphological changes. Department of Oral and Maxillofacial Surgery, Miyazaki Medical College, Miyazaki, Japan. Nine patients with repaired cleft palate in the mixed dentition stage underwent maxillary distraction using a face mask and an intraoral fixed appliance system. The severity of hypernasality, velopharyngeal insufficiency, and measurements such as pharyngeal depth, velar length, and the rotation of the palatal plane were evaluated. Increase in pharyngeal depth was not always proportional to the amount of advancement. It depended on the posture of the posterior pharyngeal wall and the rotation of palatal plane. Cephalometric measurements of the nasopharynx before and after surgery confirmed subsequent changes in VPF. These were suggested to be useful in predicting future VPF. When performing maxillary distraction in patients with cleft palate in the mixed dentition stage, and when velopharyngeal closure is found to occur by velar contact against the hypertrophied adenoid, patients should be counseled about risks of subsequent deterioration in their speech before surgery.

[Radiologic picture of maxillary sinus aspergilloma].

Science.gov (United States)

Kaczmarek, I; Bilska, J; Osmola, K; Nowaczyk, M T

2010-06-01

Mycotic infection of paranasal sinus could be the etiological factor of chronic sinusitis. The increase in number of fungal sinusitis cases have been reported recently among nonimmunocompromised patient after endodontic treatment of maxillary teeth. Nonspecific clinical signs and incorrect radiologic pictures interpretation as well as loss of therapeutic standards seems to be the cause of false negative diagnosis and difficulties in treatment of fungal sinusitis. Clinical and radiological picture of maxillary sinus aspergillosis was described in this paper. In the period of 2006-2009 in the Department of Maxillo-Facial Surgery 19 patient with fungal maxillary sinusitis was treated. The endodontic treatment of maxillary teeth of the related side was performed previously in 80% examined cases. In 2 cases there were immunocompromised patients with immunosuppressive treatment. In 16 cases patients were referred to our Department due to metallic foreign body of the maxillary sinus. Routine diagnostic radiological imaging was performed in each case: paranasal sinus view--Water's view and panoramic radiograph (orthopantomograph). In 4 cases imaging was extended with computer tomography (CT) visualization. The surgical treatment was performed in each case. The final diagnosis was puted on histopathological examination and fungal culture. In 16 cases of analysed group histopathological examination and fungal culture revealed aspergilosis. In 2 cases fungal culture was negative, but histopathology slices confirm presence of hyphae of Aspergillus. In 1 case the root canal sealer was found in the maxillary sinus. In none case invasive form of aspergillosis was confirmed. In all cases Water's view of paranasal sinuses and ortopantomograph showed partially or totally clouded sinus with well-defined, single or multifocal radiopaque object similar to metallic foreign body. Characteristic finding in CT imaging was well-defined radiodence concretions that have been attributed to

Anterior maxillary segmental distraction for correction of maxillary hypoplasia and dental crowding in cleft palate patients: a preliminary report.

Science.gov (United States)

Wang, X-X; Wang, X; Li, Z-L; Yi, B; Liang, C; Jia, Y-L; Zou, B-S

2009-12-01

To evaluate the feasibility of anterior maxillary segmental distraction (AMSD) to correct maxillary hypoplasia and severe dental crowding in cleft lip and palate (CLP) patients, 7 patients (average age 16.4 years) with maxillary hypoplasia, shortened maxillary dental arch length and severe anterior dental crowding secondary to CLP were selected for this study. After anterior maxillary segmental osteotomy, 3 patients were treated using bilateral internal distraction devices, and 4 patients were treated using rigid external distraction devices. Photographs and radiographs were taken to review the improvement in facial profile and occlusion after distraction. An average 10.25 mm anterior maxillary advancement was obtained in all patients after 10-23 days of distraction and 9-16 weeks of consolidation. The sella-nasion-point A (SNA) angle increased from 69.5 degrees to 79.6 degrees. Midface convexity was greatly improved and velopharyngeal competence was preserved. The maxillary dental arch length was greatly increased by 10.1 mm (P<0.01). Dental crowding and malocclusion were corrected by orthodontic treatment. These results show that AMSD can effectively correct the hypoplastic maxilla and severe dental crowding associated with CLP by increasing the midface convexity and dental arch length while preserving velopharyngeal function, and dental crowding can be corrected without requiring tooth extraction.

Alveolar bone changes after asymmetric rapid maxillary expansion.

Science.gov (United States)

Akin, Mehmet; Baka, Zeliha Muge; Ileri, Zehra; Basciftci, Faruk Ayhan

2015-09-01

To quantitatively evaluate the effects of asymmetric rapid maxillary expansion (ARME) on cortical bone thickness and buccal alveolar bone height (BABH), and to determine the formation of dehiscence and fenestration in the alveolar bone surrounding the posterior teeth, using cone-beam computed tomography (CBCT). The CBCT records of 23 patients with true unilateral posterior skeletal crossbite (10 boys, 14.06 ± 1.08 years old, and 13 girls, 13.64 ± 1.32 years old) who had undergone ARME were selected from our clinic archives. The bonded acrylic ARME appliance, including an occlusal stopper, was used on all patients. CBCT records had been taken before ARME (T1) and after the 3-month retention period (T2). Axial slices of the CBCT images at 3 vertical levels were used to evaluate the buccal and palatal aspects of the canines, first and second premolars, and first molars. Paired samples and independent sample t-tests were used for statistical comparison. The results suggest that buccal cortical bone thickness of the affected side was significantly more affected by the expansion than was the unaffected side (P ARME significantly reduced the BABH of the canines (P ARME also increased the incidence of dehiscence and fenestration on the affected side. ARME may quantitatively decrease buccal cortical bone thickness and height on the affected side.

Impact of Platform Switching on Peri-Implant Bone Remodeling around Short Implants in the Posterior Region, 1-Year Results from a Split-Mouth Clinical Trial

NARCIS (Netherlands)

Telleman, Gerdien; Raghoebar, Gerry M.; Vissink, Arjan; Meijer, Henny J. A.

Aim: To assess the effect of platform switching on peri-implant bone remodeling around short implants (8.5mm) placed in the resorbed posterior mandibular and maxillary region of partially edentulous patients. Materials and Methods: Seventeen patients with one or more missing teeth at both sides in

Central cemento-ossifying fibroma of posterior maxilla

Directory of Open Access Journals (Sweden)

Uday Shankar Yaga

2015-01-01

Full Text Available Cemento-ossifying fibromas (COFs are relatively rare, benign lesions affecting the jaws and other craniofacial bones and are included in the group of mesodermal odontogenic tumors by Gorlin. They have a predilection for females between the third and fourth decades of life, and about 60% of the lesions are seen most often in the mandibular arch, predominantly occurring in the premolar/molar region of the mandible. This report describes a case of central COF in a 49-year-old male involving the maxillary posterior region. The current case is reported because of the rarity of such lesions and the paucity of information concerning them in the dental literature. We believe that this case illustrates many of the clinical, radiographic, and histologic features associated with cemento-ossifying tumors.

Radiodiagnostics of maxillary osteomyelitis

International Nuclear Information System (INIS)

Klemova, J.; Jenca, A.; Hanusinova, V.; Danko, J.; Ondrasovicova, J.

2006-01-01

Osteomyelitis is defined as an inflammation or infection in bone tissues - cancellous bone, bone marrow, bone compacta and periosteum due to invasion of infection from surrounding tissues. Maxillary osteomyelitis is less common disease than osteomyelitis of mandible. This can be explained by anatomical structure of maxilla which is mainly composed of sinuses and thin bone lamellae. Such a structure allows rapid propagation of the infection to the surface. There have been examined and treated 70 patients with osteomyelitis of facial bones within past 15 years at Department of stomatology and maxillo-facial surgery of P.J. Safarik University in Kosice. Only four cases were diagnosed as maxillary osteomyelitis. The aim of this study was to mention the differences in anatomy and symptoms of acute and chronic stage of maxillary osteomyelitis and to give a detailed radiographic picture of this affliction. (authors)

Predicted Versus Attained Surgical Correction of Maxillary Advancement Surgery Using Cone Beam Computed Tomography

Science.gov (United States)

2016-07-01

little one and support our Navy life and my desire to complete this residency. Thank you for all those dinners you brought us and for loving my co...be considered in the antero-posterior, transverse, and vertical planes. Tooth-to- lip relationships in repose as well as animation are also critical

Postoperative Maxillary Cyst: A Case Report

Directory of Open Access Journals (Sweden)

Asiye Şafak Bulut

2010-01-01

Full Text Available Postoperative maxillary cyst is a quite rare delayed complication of surgical intervention associated with maxillary sinuses. It occurs many years after surgery. This paper describes a 54-year-old woman presenting with swelling of left cheek for seven-years duration. The orthopantomograph revealed a unilocular cystic radiolucency with well-defined margins in left maxillary sinus. In the computerized tomography, the cyst had a sclerotic wall with bony condensations. Aspiration cytology revealed many neutrophil leukocytes. Cyst was drained and enucleated. Histopathologically, it had a fibrous wall with inflammation and focal reactive bone formation and lined by a respiratory-type epithelium. In the clinical history, it is learned that she had a maxillary sinus surgery 8 years ago and the diagnosis was made considering the clinical and histopathological findings.

Changes in anteroposterior position and inclination of the maxillary incisors after surgical-orthodontic treatment of skeletal class III malocclusions.

Science.gov (United States)

Zou, Bingshuang; Zhou, Yang; Lowe, Alan A; Li, Huiqi; Pliska, Benjamin

2015-12-01

The purpose of this study was to evaluate and compare the anteroposterior (AP) position and inclination of the maxillary incisors in subjects with class I normal occlusion and a harmonious profile with patients with skeletal class III malocclusions, and to investigate the changes in maxillary incisor inclination and AP position after surgical-orthodontic treatment in class III patients. Sixty-five subjects (35 female and 30 male; mean age: 21.8 ± 3.89 years) with normal profiles and class I skeletal and dental patterns were selected as a control sample. Sixty-seven patients (38 female and 29 male; mean age: 21.3 ± 3.31 years) with skeletal and dental class III malocclusions who sought surgical-orthodontic treatment were used as the study sample. Subjects were asked to smile and profile photographs were taken with the head in a natural position and the maxillary central incisors and the forehead in full view; cephalograms were taken and superimposed on the profile pictures according to the outline of the forehead and nose. Forehead inclination, maxillary incisor facial inclination and the AP position of the maxillary central incisor relative to the forehead (FAFFA) were measured on the integrated images and statistical analyses were performed. In both groups, there were no significant male/female differences in either the maxillary central incisor inclination or AP position. Female subjects had a significantly steeper forehead inclination compared with males (P 0.05). In the control group, 84.6% had the facial axial point (FA) of their maxillary central incisors positioned between lines through the forehead facial axis (FFA) point and the glabella. In the study group, however, 79.1% had the maxillary central incisors positioned posterior to the line through the FFA point and the difference with the control group was statistically significant (P 0.05). With the integrated radiograph-photograph method, the lateral cephalogram was reoriented, which makes it possible

Transverse effect of Haas and Hyrax appliances on the upper dental arch in patients with unilateral complete cleft lip and palate: A comparative study

Science.gov (United States)

Façanha, Anna Júlia de Oliveira; Lara, Tulio Silva; Garib, Daniela Gamba; da Silva Filho, Omar Gabriel

2014-01-01

Objective The aim of the present study was to evaluate the transverse effect of rapid maxillary expansion in patients with unilateral complete cleft lip and palate while comparing the Haas and Hyrax appliances. Methods The sample consisted of 48 patients divided into two groups: Group I - 25 patients treated with modified Haas appliance (mean age: 10 years 8 months); and Group II - 23 patients treated with Hyrax appliance (mean age: 10 years 6 months). Casts were taken during pre-expansion and after removal of the appliance at the end of the retention period. The models were scanned with the aid of the 3 Shape R700 3D scanner. Initial and final transverse distances were measured at cusp tips and cervical-palatal points of maxillary teeth by using the Ortho AnalyzerTM 3D software. Results The mean expansion obtained between cusp tips and cervical-palatal points for inter-canine width was 4.80 mm and 4.35 mm with the Haas appliance and 5.91 mm and 5.91 mm with the Hyrax appliance. As for first premolars or first deciduous molars, the values obtained were 6.46 mm and 5.90 mm in the Haas group and 7.11 mm and 6.65 mm in the Hyrax group. With regard to first molars, values were 6.11 mm and 5.24 mm in the Haas group and 7.55 mm and 6.31 mm in the Hyrax group. Conclusion Rapid maxillary expansion significantly increased the transverse dimensions of the upper dental arch in patients with cleft palate, with no significant differences between the Hass and Hyrax expanders. PMID:24945513

Transverse effect of Haas and Hyrax appliances on the upper dental arch in patients with unilateral complete cleft lip and palate: A comparative study

Directory of Open Access Journals (Sweden)

Anna Júlia de Oliveira Façanha

2014-04-01

Full Text Available Objective: The aim of the present study was to evaluate the transverse effect of rapid maxillary expansion in patients with unilateral complete cleft lip and palate while comparing the Haas and Hyrax appliances. Methods: The sample consisted of 48 patients divided into two groups: Group I - 25 patients treated with modified Haas appliance (mean age: 10 years 8 months; and Group II - 23 patients treated with Hyrax appliance (mean age: 10 years 6 months. Casts were taken during pre-expansion and after removal of the appliance at the end of the retention period. The models were scanned with the aid of the 3 Shape R700 3D scanner. Initial and final transverse distances were measured at cusp tips and cervical-palatal points of maxillary teeth by using the Ortho Analyzer(tm 3D software. Results: The mean expansion obtained between cusp tips and cervical-palatal points for inter-canine width was 4.80 mm and 4.35 mm with the Haas appliance and 5.91 mm and 5.91 mm with the Hyrax appliance. As for first premolars or first deciduous molars, the values obtained were 6.46 mm and 5.90 mm in the Haas group and 7.11 mm and 6.65 mm in the Hyrax group. With regard to first molars, values were 6.11 mm and 5.24 mm in the Haas group and 7.55 mm and 6.31 mm in the Hyrax group. Conclusion: Rapid maxillary expansion significantly increased the transverse dimensions of the upper dental arch in patients with cleft palate, with no significant differences between the Hass and Hyrax expanders.

[Stimulation and evaluation on maxillary distraction osteogenesis using CASSOS 2001].

Science.gov (United States)

Zhu, Min; Qiu, Wei-liu; Tang, You-sheng; Li, Qing-yun

2002-09-01

To simulate maxillary distraction osteogenesis and evaluate the change of soft and hard tissue before and after treatment, using Computer-Assisted Simulation System for Orthognathic Surgery( CASSOS 2001). A fourteen-year-old boy with severe maxillary hypoplasia, due to unilateral cleft lip and palate, was analysed by cephalometric analysis. The simulations of maxillary distraction osteogenesis (Le Fort I osteotomy and Le Fort II osteotomy) were re-analysed. After the treatment, cephalometric analysis was preformed again. The data were compared. The maxillary hypoplasia was well treated using maxillary distraction osteogenesis; Compared with Le fort I osteotomy, more satisfactory results can be obtained by Le fort I distraction osteogenesis. Maxillary distraction osteogenesis is a better way to treat severe maxillary hypoplasia with operated CLP than maxillary osteotomy. CASSOS 2001 can help surgeons and patients on simulation and evaluation of maxillary distraction osteogenesis, and on decision of treatment plan.

Impact of platform switching on inter-proximal bone levels around 8.5 mm implants in the posterior region; 5-year results from a randomized clinical trial

NARCIS (Netherlands)

Telleman, Gerdien; Raghoebar, Gerry M.; Vissink, Arjan; Meijer, Henny J. A.

Aim: To assess the medium- term results of 8.5 mm implants supplied with a conventional platform- matched implant- abutment connection or a platform- switched design. Materials and Methods: Eighty patients with one or more missing teeth in the maxillary or mandibular posterior zone were randomly

Aspergillus in endodontic infection near the maxillary sinus

Directory of Open Access Journals (Sweden)

Cinthya Cristina Gomes

2015-10-01

Full Text Available ABSTRACT INTRODUCTION: Diseases of the maxillary sinus have been associated with dental roots near the maxillary sinus that have undergone endodontic treatment. OBJECTIVE: To investigate the presence of filamentous fungi in patients with dental roots near the maxillary sinus who had apical periodontitis treated endodontically, and to alert practitioners that this could be a possible avenue of contamination of the sinus in patients who develop maxillary sinus infection. METHODS: Cross-sectional study in 60 palatal roots of the first maxillary molars near the maxillary sinus, that underwent endodontic treatment for apical periodontitis. After removal of the filling material, dentin shavings were collected and placed in test tubes containing Sabouraud dextrose agar and chloramphenicol. The phenotype was determined by macroscopic and microscopic examination of the colonies. For polymerase chain reaction, the primers ITS-5 and ITS-4 were used. The sequences obtained were compared with those deposited at GenBank using the Basic Local Alignment Search Tool program. RESULTS: Filamentous fungi were isolated from 6 of 60 canals (10%:Aspergillus niger (6.7%, Aspergillus versicolor (1.6%, and Aspergillus fumigatus(1.6%. CONCLUSION: Root canals near the maxillary sinus with endodontic treatment and apical periodontitis may exhibit positive cultures for filamentous fungi. Interested professionals should be alert, because these microorganisms have pathogenic characteristics that can cause disease of odontogenic origin in the maxillary sinus.

Feasibility of Shape-Memory Ni/Ti Alloy Wire Containing Tube Elevators for Transcrestal Detaching Maxillary Sinus Mucosa: Ex Vivo Study

Directory of Open Access Journals (Sweden)

Yanfeng Li

2016-12-01

Full Text Available Background: Osteotome sinus floor elevation is a less invasive approach to augment an insufficient alveolar bone at the posterior maxilla for dental implantation. However, this approach has some limitations due to the lack of sinus lift tools available for clinical use and the small transcrestal access to the maxillary sinus floor. We recently invented shape-memory Ni/Ti alloy wire containing tube elevators for transcrestal detaching maxillary sinus mucosa, and developed goat ex vivo models for direct visualizing the effectiveness of detaching sinus mucosa in real time during transcrestal maxillary sinus floor elevation. Methods: We evaluated our invented elevators, namely elevator 012 and elevator 014, for their effectiveness for transcrestal detaching maxillary sinus mucosa using the goat ex vivo models. We measured the length of sinus mucosa detached in mesial and distal directions or buccal and palatal directions, and the space volume created by detaching maxillary sinus mucosa in mesial, distal, buccal and palatal directions using the invented elevators. Results: Elevator 012 had a shape-memory Ni/Ti alloy wire with a diameter of 0.012 inch, while elevator 014 had its shape-memory Ni/Ti alloy wire with a diameter of 0.014 inch. Elevator 012 could detach the goat maxillary sinus mucosa in the mesial or distal direction for 12.1±4.3 mm, while in the buccal or palatal direction for 12.5±6.7 mm. The elevator 014 could detach the goat maxillary sinus mucosa for 23.0±4.9 mm in the mesial or distal direction, and for 19.0±8.1 mm in the buccal or palatal direction. An average space volume of 1.7936±0.2079 ml was created after detaching the goat maxillay sinus mucosa in both mesial/distal direction and buccal/palatal direction using elevator 012; while the average space volume created using elevator 014 was 1.8764±0.2366 ml. Conclusion: Both two newly invented tube elevators could effectively detach the maxillary sinus mucosa on the goat ex

Feasibility of Shape-Memory Ni/Ti Alloy Wire Containing Tube Elevators for Transcrestal Detaching Maxillary Sinus Mucosa: Ex Vivo Study.

Science.gov (United States)

Li, Yanfeng; Wang, Fuli; Hu, Pin; Fan, Jiadong; Han, Yishi; Liu, Bin; Liu, Tao; Yang, Chunhao; Gu, Xiangmin

2016-01-01

Osteotome sinus floor elevation is a less invasive approach to augment an insufficient alveolar bone at the posterior maxilla for dental implantation. However, this approach has some limitations due to the lack of sinus lift tools available for clinical use and the small transcrestal access to the maxillary sinus floor. We recently invented shape-memory Ni/Ti alloy wire containing tube elevators for transcrestal detaching maxillary sinus mucosa, and developed goat ex vivo models for direct visualizing the effectiveness of detaching sinus mucosa in real time during transcrestal maxillary sinus floor elevation. We evaluated our invented elevators, namely elevator 012 and elevator 014, for their effectiveness for transcrestal detaching maxillary sinus mucosa using the goat ex vivo models. We measured the length of sinus mucosa detached in mesial and distal directions or buccal and palatal directions, and the space volume created by detaching maxillary sinus mucosa in mesial, distal, buccal and palatal directions using the invented elevators. Elevator 012 had a shape-memory Ni/Ti alloy wire with a diameter of 0.012 inch, while elevator 014 had its shape-memory Ni/Ti alloy wire with a diameter of 0.014 inch. Elevator 012 could detach the goat maxillary sinus mucosa in the mesial or distal direction for 12.1±4.3 mm, while in the buccal or palatal direction for 12.5±6.7 mm. The elevator 014 could detach the goat maxillary sinus mucosa for 23.0±4.9 mm in the mesial or distal direction, and for 19.0±8.1 mm in the buccal or palatal direction. An average space volume of 1.7936±0.2079 ml was created after detaching the goat maxillay sinus mucosa in both mesial/distal direction and buccal/palatal direction using elevator 012; while the average space volume created using elevator 014 was 1.8764±0.2366 ml. Both two newly invented tube elevators could effectively detach the maxillary sinus mucosa on the goat ex vivo sinus models. Moreover, elevator 014 has advantages over

Comparison of two protocols for maxillary protraction: bone anchors versus face mask with rapid maxillary expansion

Science.gov (United States)

Cevidanes, Lucia; Baccetti, Tiziano; Franchi, Lorenzo; McNamara, James A.; De Clerck, Hugo

2010-01-01

Objective To test the hypothesis that there is no difference in the active treatment effects for maxillary advancement induced by bone-anchored maxillary protraction (BAMP) and the active treatment effects for face mask in association with rapid maxillary expansion (RME/FM). Materials and Methods This is a study on consecutively treated patients. The changes in dentoskeletal cephalometric variables from start of treatment (T1) to end of active treatment (T2) with an average T1–T2 interval of about 1 year were contrasted in a BAMP sample of 21 subjects with a RME/FM sample of 34 patients. All subjects were prepubertal at T1. Statistical comparison was performed with t-tests for independent samples. Results The BAMP protocol produced significantly larger maxillary advancement than the RME/FM therapy (with a difference of 2 mm to 3 mm). Mandibular sagittal changes were similar, while vertical changes were better controlled with BAMP. The sagittal intermaxillary relationships improved 2.5 mm more in the BAMP patients. Additional favorable outcomes of BAMP treatment were the lack of clockwise rotation of the mandible as well as a lack of retroclination of the lower incisors. Conclusions The hypothesis is rejected. The BAMP protocol produced significantly larger maxillary advancement than the RME/FM therapy. PMID:20578848

Endoscopic Cauterization of the Sphenopalatine Artery to Control Severe and Recurrent Posterior Epistaxis

Directory of Open Access Journals (Sweden)

Behrooz Gandomi

2013-06-01

Full Text Available Introduction: Epistaxis is one of the most common medical emergencies, making the management of posterior epistaxis a challenging problem for the ear, nose, and throat (ENT surgeon. In the cases of conservative management failure, ligation of the major arteries or percutaneous embolization of the maxillary artery is performed routinely in most units, but rates of failure and complications are high.The objective of this study was to assess the effectiveness of endoscopic sphenopalatine artery (SPA cauterization in patients with refractory posterior epistaxis.   Materials and Methods: Between April 2011 and January 2012, 27 patients (15 males and 12 females with refractory posterior epistaxis underwent endoscopic SPA cauterization in two tertiary referral hospitals in Shiraz. Three patients underwent bilateral cauterization.   Results: Four patients (from 30 arteries had new epistaxis after surgery, three experienced subsequent epistaxis requiring medical treatment, and one patient had a minor epistaxis not needing treatment.   Conclusion:  The SPA electrocoagulation technique seems to be safe, simple, fast, and effective with low rates of morbidity and complications for the management of refractory posterior epistaxis. Endoscopic SPA cauterization should be considered as an immediate second-line management when conservative treatment as first-line management fails. 

Correlation of clinical predictions and surgical results in maxillary superior repositioning.

Science.gov (United States)

Tabrizi, Reza; Zamiri, Barbad; Kazemi, Hamidreza

2014-05-01

This is a prospective study to evaluate the accuracy of clinical predictions related to surgical results in subjects who underwent maxillary superior repositioning without anterior-posterior movement. Surgeons' predictions according to clinical (tooth show at rest and at the maximum smile) and cephalometric evaluation were documented for the amount of maxillary superior repositioning. Overcorrection or undercorrection was documented for every subject 1 year after the operations. Receiver operating characteristic curve test was used to find a cutoff point in prediction errors and to determine positive predictive value (PPV) and negative predictive value. Forty subjects (14 males and 26 females) were studied. Results showed a significant difference between changes in the tooth show at rest and at the maximum smile line before and after surgery. Analysis of the data demonstrated no correlation between the predictive data and the surgical results. The incidence of undercorrection (25%) was more common than overcorrection (7.5%). The cutoff point for errors in predictions was 5 mm for tooth show at rest and 15 mm at the maximum smile. When the amount of the presurgical tooth show at rest was more than 5 mm, 50.5% of clinical predictions did not match the clinical results (PPV), and 75% of clinical predictions showed the same results when the tooth show was less than 5 mm (negative predictive value). When the amount of presurgical tooth shown in the maximum smile line was more than 15 mm, 75% of clinical predictions did not match with clinical results (PPV), and 25% of the predictions had the same results because the tooth show at the maximum smile was lower than 15 mm. Clinical predictions according to the tooth show at rest and at the maximum smile have a poor correlation with clinical results in maxillary superior repositioning for vertical maxillary excess. The risk of errors in predictions increased when the amount of superior repositioning of the maxilla increased

Surgically assisted rapid maxillary expansion in adults.

Science.gov (United States)

Pogrel, M A; Kaban, L B; Vargervik, K; Baumrind, S

1992-01-01

Twelve adults with maxillary width discrepancy of greater than 5 mm were treated by surgically assisted rapid maxillary expansion. The procedure consisted of bilateral zygomatic buttress and midpalatal osteotomies combined with the use of a tooth-borne orthopedic device postoperatively. Mean palatal expansion of 7.5 mm (range of 6 to 13 mm), measured in the first molar region, was achieved within 3 weeks in all patients. Expansion remained stable during the 12-month study period, with a mean relapse for the entire group of 0.88 +/- 0.48 mm. Morbidity was limited to mild postoperative discomfort. The results of this preliminary study indicated that surgically assisted rapid maxillary expansion is a safe, simple, and reliable procedure for achieving a permanent increase in skeletal maxillary width in adults. Further study is necessary to document the three-dimensional movements of the maxillary segments and long-term stability of the skeletal and dental changes.

A case report of mucoid retention cyst in maxillary sinus

Energy Technology Data Exchange (ETDEWEB)

Kim, Han Pyoung [College of Dentistry, Seoul National University, Seoul (Korea, Republic of)

1973-11-15

The author have observed mucoid retention cyst in the right maxillary sinus of the patient, 41 year old woman, complained discharging of purulent exudate on the right maxillary molar area, and obtained the following conclusions; 1. The mucoid retention cyst in maxillary sinus casts a faint dome shaped shadow into the radiolucent image of maxillary sinus. 2. The mucoid retention cyst in maxillary sinus may occurred without the history of trauma. 3. Intraoral standard films are also valuable for the interpretation of the lesions in maxillary sinus but only extraoral roentgenograms.

Asymmetrical distalization of maxillary molars with zygomatic anchorage, improved superelastic nickel-titanium alloy wires, and open-coil springs.

Science.gov (United States)

Ishida, Takayoshi; Yoon, Hyung Sik; Ono, Takashi

2013-10-01

In nongrowing patients with skeletal Class II malocclusion, premolar extraction or maxillary distalization can be used as camouflage treatment. Zygomatic anchorage enables distalization in uncooperative or noncompliant patients. We describe 1 such procedure in a 24-year-old woman. We used novel improved superelastic nickel-titanium archwires combined with nickel-titanium open-coil springs to provide a constant and continuous low force to the dentition. We were able to successfully eliminate the protrusive profile and correct the Class II molar relationship using this system of zygomatic anchorage. The posterior occlusal relationships were improved to achieve Class I canine and molar relationships on both sides, and ideal overbite and overjet relationships were established. Facial esthetics was improved with decreased protrusion of the upper and lower lips. The method used here is a promising alternative to traditional distalization techniques and might offer an effective and simple means of distalizing maxillary molars in uncooperative patients. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Aspergillus in endodontic infection near the maxillary sinus.

Science.gov (United States)

Gomes, Cinthya Cristina; Pinto, Larissa Christina Costa; Victor, Fernanda Loretti; Silva, Erlange Andrade Borges da; Ribeiro, Apoena de Aguiar; Sarquis, Maria Inês de Moura; Camões, Isabel Coelho Gomes

2015-01-01

Diseases of the maxillary sinus have been associated with dental roots near the maxillary sinus that have undergone endodontic treatment. To investigate the presence of filamentous fungi in patients with dental roots near the maxillary sinus who had apical periodontitis treated endodontically, and to alert practitioners that this could be a possible avenue of contamination of the sinus in patients who develop maxillary sinus infection. Cross-sectional study in 60 palatal roots of the first maxillary molars near the maxillary sinus, that underwent endodontic treatment for apical periodontitis. After removal of the filling material, dentin shavings were collected and placed in test tubes containing Sabouraud dextrose agar and chloramphenicol. The phenotype was determined by macroscopic and microscopic examination of the colonies. For polymerase chain reaction, the primers ITS-5 and ITS-4 were used. The sequences obtained were compared with those deposited at GenBank using the Basic Local Alignment Search Tool program. Filamentous fungi were isolated from 6 of 60 canals (10%): Aspergillus niger (6.7%), Aspergillus versicolor (1.6%), and Aspergillus fumigatus (1.6%). Root canals near the maxillary sinus with endodontic treatment and apical periodontitis may exhibit positive cultures for filamentous fungi. Interested professionals should be alert, because these microorganisms have pathogenic characteristics that can cause disease of odontogenic origin in the maxillary sinus. Copyright © 2015 Associação Brasileira de Otorrinolaringologia e Cirurgia Cérvico-Facial. Published by Elsevier Editora Ltda. All rights reserved.

Strategic camouflage treatment of skeletal Class III malocclusion (mandibular prognathism) using bone-borne rapid maxillary expansion and mandibular anterior subapical osteotomy.

Science.gov (United States)

Seo, Yu-Jin; Lin, Lu; Kim, Seong-Hun; Chung, Kyu-Rhim; Nelson, Gerald

2016-01-01

This case report presents the camouflage treatment that successfully improved the facial profile of a patient with a skeletal Class III malocclusion using bone-borne rapid maxillary expansion and mandibular anterior subapical osteotomy. The patient was an 18-year-old woman with chief complaints of crooked teeth and a protruded jaw. Camouflage treatment was chosen because she rejected orthognathic surgery under general anesthesia. A hybrid type of bone-borne rapid maxillary expander with palatal mini-implants was used to correct the transverse discrepancy, and a mandibular anterior subapical osteotomy was conducted to achieve proper overjet with normal incisal inclination and to improve her lip and chin profile. As a result, a Class I occlusion with a favorable inclination of the anterior teeth and a good esthetic profile was achieved with no adverse effects. Therefore, the hybrid type of bone-borne rapid maxillary expander and a mandibular anterior subapical osteotomy can be considered effective camouflage treatment of a skeletal Class III malocclusion, providing improved inclination of the dentition and lip profile. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Volumetric measurement of the maxillary sinus by coronal CT scan

International Nuclear Information System (INIS)

Ikeda, Atsuko

1996-01-01

The volume of the maxillary sinus was estimated by coronal CT scan. The purpose of this study was to compare the estimated volume of the normal maxillary sinus with that of the inflamed maxillary sinus. Patients were classified following evaluation by CT scan of the paranasal sinuses into 3 categories. Group A (n=12): Patients suffered from headache, facial pain and epistaxis, but CT scans of their nasal cavity and paranasal sinus were within normal limits without inflammatory change. Group B (n=69): Patients with bilateral chronic maxillary sinusitis, CT scans of whom showed inflammatory changes in both maxillary sinuses. All of the patients in this group underwent sinus surgery after coronal CT scans. Group C (n=14): Patients with unilateral chronic maxillary sinusitis, CT scans of whom showed inflammatory change in unilateral maxillary sinuses. CT scans of these patients were measured by Plannimeter to take the area of each image of the maxillary sinus. Consecutively imaged areas were summated by integral calculus to obtain an estimate of the sinus volume. The mean maxillary sinus volume in the affected sinuses was significantly smaller than those in the contralateral normal sinuses (p<0.05, Wilcoxon-test). The various volumes of the maxillary sinuses and the developmental cause were discussed. Comparison of groups A with B suggested three distinct patterns; the maxillary sinus volume has decreased due to inflammatory changes in the bone. The small sinuses have a tendency to develop chronic inflammatory change. The aeration in the maxillary sinus may be decreased when anatomic variations that may obstruct the ethmoid infundibulum exist. (K.H.)

Volumetric measurement of the maxillary sinus by coronal CT scan

Energy Technology Data Exchange (ETDEWEB)

Ikeda, Atsuko [Tokyo Medical and Dental Univ. (Japan). School of Medicine

1996-08-01

The volume of the maxillary sinus was estimated by coronal CT scan. The purpose of this study was to compare the estimated volume of the normal maxillary sinus with that of the inflamed maxillary sinus. Patients were classified following evaluation by CT scan of the paranasal sinuses into 3 categories. Group A (n=12): Patients suffered from headache, facial pain and epistaxis, but CT scans of their nasal cavity and paranasal sinus were within normal limits without inflammatory change. Group B (n=69): Patients with bilateral chronic maxillary sinusitis, CT scans of whom showed inflammatory changes in both maxillary sinuses. All of the patients in this group underwent sinus surgery after coronal CT scans. Group C (n=14): Patients with unilateral chronic maxillary sinusitis, CT scans of whom showed inflammatory change in unilateral maxillary sinuses. CT scans of these patients were measured by Plannimeter to take the area of each image of the maxillary sinus. Consecutively imaged areas were summated by integral calculus to obtain an estimate of the sinus volume. The mean maxillary sinus volume in the affected sinuses was significantly smaller than those in the contralateral normal sinuses (p<0.05, Wilcoxon-test). The various volumes of the maxillary sinuses and the developmental cause were discussed. Comparison of groups A with B suggested three distinct patterns; the maxillary sinus volume has decreased due to inflammatory changes in the bone. The small sinuses have a tendency to develop chronic inflammatory change. The aeration in the maxillary sinus may be decreased when anatomic variations that may obstruct the ethmoid infundibulum exist. (K.H.)

endodontic treatment of unusually long discolored maxillary central ...

African Journals Online (AJOL)

a few cases of dual–rooted maxillary central incisor have been reported in literature1-5. Maxillary central incisors vary in root ... The following case report describes the endodontic management of a patient with an unusually long maxillary central incisor in our environment. CASE PROFILE. A 31 year-old male was referred ...

[Posterior partial trochanteric osteotomy for the treatment of the roof involved acetabular fractures].

Science.gov (United States)

Wang, Pan-Feng; Xu, Shuo-Gui; Zhang, Chun-Cai; Fu, Qing-Ge; Zhang, Yun-Tong; Liu, Xin-Wei; Niu, Yun-Fei; Tang, Yang

2013-11-01

To introduce a new trochanteric osteotomy,and evaluate the outcome of the procedure combined a posterior lateral approach in treating acetabular fractures which involving the roof. Between March 2007 and Novmber 2010,30 patients with displaced acetabular fractures involving the dome need trochanteric osteotomy were retrospectively reviewed. There were 21 males and 9 females,ranging in age from 18 to 70 years with an average of 35.2 years at the time of injury. According to Letournel-Judet classification, there were 10 posterior wall fractures,7 posterior column fractures,5 transverse fractures, 2 T-shape fractures, 1 transverse associated with posterior wall fracture, 3 posterior column and wall fractures and 2 bicolumn fractures. The standards of Matta,the modified Merle d'Aubigne-Postel, Medical Research Council were respectively used to evaluate the reduction result, function of hip joint and the strength of hip abduction. All patients were followed up with an average time of 25 months (18 to 40) and all osteotomy sites obtained bone union with an average time of 8.4 weeks (6 to 12). No bone non-union, bone block displaceing, internal fixation looseing and breaking,infection of deep part were found. Seventeen patients got anatomic reduction, 12 got satisfied reduction, and 1 got unsatisfied result according to the criteria of Matta. At final follow-up, function of hip joint obtained excellent results in 11 cases, good in 15, fair in 3 and poor in 1. The strength of the abductors of 3 patients were grade 4 and 27 patients were grade 5. Posterior partial great trochanteric osteotomy can enhance the exposure and provide a more accurate reduction and degrade the difficulty of acetabular fracture fixation without increasing the risk of complications. The method provide a new way for the treatment of the roof involved acetabular fractures.

Evaluation of the anterior and posterior ethmoidal canal by computed tomography

International Nuclear Information System (INIS)

Cankal, F.; Apaydin, N.; Acar, H.I.; Elhan, A.; Tekdemir, I.; Yurdakul, M.; Kaya, M.; Esmer, A.F.

2004-01-01

AIM: To examine the anatomy, length and angulation of the anterior and posterior ethmoidal canals (AECs and PECs) using computed tomography (CT), and to determine the anatomical landmarks in which the canals are expected to be seen in transverse and coronal planes. MATERIALS AND METHODS: CT images of 150 patients were analysed. One, 2, and 3 mm thick sections were obtained separately in axial and coronal images. The frequency of visualization of the AECs and PECs, and if present, a third canal, was noted. The course and the angulation of the AEC and the PEC in transverse and coronal planes were recorded. On axial sections the distance between the AEC and PEC and the previously defined landmarks were measured. On coronal images, the distances were calculated from the thickness of the cross-section and the number of sections between the various structures. RESULTS: The AEC was identified as a separate canal in 84% of patients, and was embedded in the ethmoid roof in 16%. The PEC was seen as a separate canal in 8% and was present in the ethmoid roof in 92%. On the 1 mm thick coronal and transverse sections, a third canal was identified at the junction of the middle and posterior third of the AEC-PEC distance in both of the images. The average lengths of these canals were 4-12 mm (mean 8.2 mm) for the AEC, and 2-13 mm (mean 7.6 mm) for the PEC. CONCLUSIONS: To avoid the complications that can develop during endoscopic sinus surgery; the course, length and the angulations of the anterior and posterior ethmoidal arteries and their canals can be identified by CT in standard positions if a sufficiently thin section thickness is used. The present study has shown the exact CT localization of the AECs and PECS, which are frequently overlooked when evaluating para-nasal sinuses

Radiographic Comparison of Bovine Bone Substitute Alone versus Bovine Bone Substitute and Simvastatin for Human Maxillary Sinus Augmentation

Directory of Open Access Journals (Sweden)

Amir Ali Reza Rasouli Ghahroudi

2018-01-01

Full Text Available Objectives: The aim of this study was to compare the efficacy of bovine bone substitute (Compact Bone B. ® alone versus bovine bone substitute and simvastatin for human maxillary sinus augmentation.Materials and Methods: This study was conducted on 16 sinuses in eight patients. Radiographic assessments were done preoperatively (T0, immediately (T1 and at nine months after sinus grafting (T2. Alveolar bone height and density were assessed on cone beam computed tomography (CBCT scans using Planmeca Romexis™ Imaging Software 2.2.Results: The change in alveolar bone height and density between T0, T1 and T2 was significant in both groups. Alveolar bone height (h0, h1, h2 and vertical height of the grafted bone (g1, g2 in three lines (anterior, middle and posterior were not significantly different between groups. The grafted bone height shrinkage (% in the anterior, middle and posterior limits of the augmented area were not significantly different between groups. The existing alveolar and grafted bone density increased significantly in both groups between T1 and T2, except for the existing alveolar bone density in the control group. There were no statistically significant differences between the alveolar bone density values obtained in TI and T2 between groups, except for the existing alveolar bone density at T1.Conclusions: This study did not show any significant positive effect for simvastatin in maxillary sinus augmentation based on radiographic examination.

Evaluation of surgically assisted rapid maxillary expansion with piezosurgery versus oscillating saw and chisel osteotomy - a randomized prospective trial.

Science.gov (United States)

Rana, Majeed; Gellrich, Nils-Claudius; Rana, Madiha; Piffkó, Jozsef; Kater, Wolfgang

2013-02-17

Ultrasonic bone-cutting surgery has been introduced as a feasible alternative to the conventional sharp instruments used in craniomaxillofacial surgery because of its precision and safety. The piezosurgery medical device allows the efficient cutting of mineralized tissues with minimal trauma to soft tissues. Piezoelectric osteotome has found its role in surgically assisted rapid maxillary expansion (SARME), a procedure well established to correct transverse maxillary discrepancies. The advantages include minimal risk to critical anatomic structures. The purpose of this clinical comparative study (CIS 2007-237-M) was to present the advantages of the piezoelectric cut as a minimally invasive device in surgically assisted, rapid maxillary expansion by protecting the maxillary sinus mucosal lining. Thirty patients (18 females and 12 males) at the age of 18 to 54 underwent a surgically assisted palatal expansion of the maxilla with a combined orthodontic and surgical approach. The patients were randomly divided into two separate treatment groups. While Group 1 received conventional surgery using an oscillating saw, Group 2 was treated with piezosurgery. The following parameters were examined: blood pressure, blood values, required medication, bleeding level in the maxillary sinus, duration of inpatient stay, duration of surgery and height of body temperature. The results displayed no statistically significant differences between the two groups regarding laboratory blood values and inpatient stay. The duration of surgery revealed a significant discrepancy. Deploying piezosurgery took the surgeon an average of 10 minutes longer than working with a conventional-saw technique. However, the observation of the bleeding level in the paranasal sinus presented a major and statistically significant advantage of piezosurgery: on average the bleeding level was one category above the one of the remaining patients. This method of piezoelectric surgery with all its advantages is going

Maxillary sagittal growth evaluated on dry skulls from children and adolescents

DEFF Research Database (Denmark)

Damgaard, Christian; Caspersen, Louise Miltenburg; Kjær, Inger

2011-01-01

Abstract Objective. The hypothesis of the present study is that the inter-relationship between the greater palatine foramen (stable structure) and the first maxillary molar, which is located in the growing and forward-moving maxilla, expresses the longitudinal growth of the maxilla. Materials...... foramina and another connecting the lingual interlobal incisions in the first permanent molars. The perpendicular distance (T) between these two lines expressed the distance between the foramen and the first molar. Results. The T-distance increased markedly between the stages where the first, second....... Conclusion. This study shows that the greater palatine foramen is located close to the most posterior located and erupted permanent molar in normally developed dentitions without agenesis. This information may be valuable for dentists when applying local anesthetics. Furthermore, the study revealed a growth...

The use of internal maxillary distraction for maxillary hypoplasia: a preliminary report.

Science.gov (United States)

Van Sickels, Joseph E; Madsen, Mathew J; Cunningham, Larry L; Bird, Douglas

2006-12-01

Distraction osteogenesis is a useful alternative to advance the maxilla in complicated cases of maxillary hypoplasia. The purpose of this article is to review the workup, experience, and preliminary results with the use of internal distraction osteogenesis for maxillary hypoplasia at one teaching institution. Over a 5-year period, more than 300 patients with craniofacial and dentofacial defects have undergone oral and maxillofacial surgery at our center to correct their skeletal discrepancies. Of these, 10 have had maxillary distraction osteogenesis done with internal distractors. Follow-up of 6 months or more was available for 8 patients. Stereolithographic models were used to bend distractors prior to surgery in 6 patients. Latency prior to the start of distraction was 3 to 7 days and varied with the age of the patient. Distraction occurred at approximately 1 mm per day with an average distraction length of 8.5 mm (range, 6-10 mm). Excellent occlusal results were obtained in 5 patients. Major complications including nonunion and failure to achieve acceptable occlusal results were observed in 3 patients. Minor complications including pain and loosening of the distracter devices were observed in 2 patients, but did not appear to affect the esthetic and functional results. Distraction osteogenesis is a useful alternative to traditional orthognathic surgery to treat maxillary hypoplasia. Internal distractions are attractive to patients, but are more difficult to place and can cause discomfort to patients when trying to achieve an ideal primary vector of distraction. Stereolithographic models can help with placement of the device. Changes in design of distractors may help with patient discomfort.

Van der Woude syndrome: Management in the mixed dentition

OpenAIRE

Sonahita Agarwal; M R Dinesh; R M Dharma; B C Amarnath

2013-01-01

This article presents the case of a patient with Van der Woude syndrome treated with orthodontic and orthopedic intervention in the mixed dentition stage. The patient had a bilateral cleft of the lip and alveolus accompanied by lip pits on the lower lip. Intra-orally, there was bilateral anterior and posterior cross-bite with a collapsed maxilla. The maxillary transverse deficiency was managed with orthopedic expansion and the second phase of treatment involved secondary alveolar bone graftin...

Aspergilloma of the maxillary sinus: report of a case

International Nuclear Information System (INIS)

Kang, Ju Han; Kim, Gyu Tae; Choi, Yong Suk; Hwang, Eui Hwan; Yu, Jae Jung

2010-01-01

Aspergilloma of the paranasal sinus is a non-invasive form of aspergillosis, most often in the maxillary sinus. This case presents an 86-year-old female with aspergilloma of the left maxillary sinus. The patient's chief complaint was intermittent pain on the left maxillary first premolar area. A radiopacification of the left maxillary sinus was observed on the panoramic radiograph. Cone-beam computed tomography revealed complete radiopacification of the left maxillary sinus and scattered multiple radiopaque mass inside the lesion. Biopsy was performed under local anesthesia. On microscopic examination, numerous fungal hyphae, which branch at acute angle, were observed. The diagnosis was made as an aspergilloma based on the histopathologic examination.

Onset of Tlx-3 expression in the chick cerebellar cortex correlates with the morphological development of fissures and delineates a posterior transverse boundary.

Science.gov (United States)

Logan, Cairine; Millar, Cassie; Bharadia, Vinay; Rouleau, Katherine

2002-06-24

Recent studies have shown that the mammalian cerebellar cortex can be subdivided into a reproducible array of zones and stripes. In particular, discontinuous patterns of gene expression together with mutational analysis suggest that there are at least four distinct transverse zones along the rostrocaudal axis in mouse: the anterior zone (lobules I-V), the central zone (lobules VI and VII), the posterior zone (lobules VIII and IX), and the nodular zone (lobule X). Here we show that the divergent homeobox-containing transcription factor, Tlx- 3 (also known as Hox11L2 or Rnx) is transiently expressed in external granule cells in a distinct transverse domain of the developing chick cerebellar cortex. Expression is first detected at Hamburger and Hamilton (HH) stage 35. Interestingly, Tlx-3 mRNA expression is initially confined to, and coincident with, the morphological development of fissures. Slightly later, at HH stage 38, expression extends throughout the developing external granular layer (EGL) of lobules I-IXab. Notably, no Tlx-3 expression was detected in lobules IXc and X at any developmental time point examined. Expression is noticeably stronger in nonproliferating cells located in the deep layer of the EGL. Tlx-3 expression is downregulated as granule cells migrate inward to form the internal granule layer and is undetectable shortly after birth. These results suggest that Tlx-3 is expressed as granule cells become postmitotic and suggest that Tlx-3 may play a role in the differentiation of distinct neuronal populations in the cerebellum. Copyright 2002 Wiley-Liss, Inc.

Displacement of a dental implant into the maxillary sinus after internal sinus floor elevation: report of a case and review of literature.

Science.gov (United States)

Ding, Xiaojun; Wang, Qing; Guo, Xuehua; Yu, Youcheng

2015-01-01

Dental implant placement in the posterior maxilla may be complicated by implant migration into the maxillary sinus. To report the clinical and radiological characteristics of a patient who experienced dental implant displacement into the maxillary sinus following sinus floor elevation, and to compare our findings with those of other published reports of the displacement of dental implants. Implant placement and maxillary sinus elevation were performed simultaneously. The location of the displaced implant was monitored for 8 years, until the ectopic implant was surgically removed using the lateral window approach. The contributing factors, treatment modality, and clinical outcome for our patient were compared with those of patients reported in the literature. The clinical characteristics of our case were similar to those of patients with displaced implants who were also asymptomatic for long periods. The clinical outcome of our case was consistent with that of patients who underwent similar surgeries. Transnasal endoscopic removal of an ectopic implant may be suitable in cases in which the ectopic implant is accessible. Transoral direct approaches are adequate in most cases in which endoscopic approaches may be confounded. The bony-window transoral technique may allow the removal of large implants.

Management of bimaxillary transverse discrepancy with vertical excess

Directory of Open Access Journals (Sweden)

Dinesh C Chaudhary

2015-01-01

Full Text Available A 14-year-old boy reported with a complaint of severe irregularity of lower teeth and forwardly placed upper teeth. History revealed snoring as an occasional complaint. The case was diagnosed as mild class II skeletally with increased lower anterior face height, bimaxillary transverse discrepancy leading to severe crowding in the lower arch, V-shaped upper arch with increased overjet and deep bite. Three phase treatment was planned. In the first phase, bimaxillary expansion with mid-symphyseal distraction osteogenesis and rapid maxillary expansion was carried out. After this phase of treatment, the episodes of snoring vanished. The second phase was 1 year of orthodontics to produce symmetric well-aligned arches in good function and aesthetics. Third, the treatment concluded with reduction-advancement genioplasty for correction of vertical excess and surgical camouflage.

Aspergilloma of the maxillary sinus: report of a case

Energy Technology Data Exchange (ETDEWEB)

Kang, Ju Han; Kim, Gyu Tae; Choi, Yong Suk; Hwang, Eui Hwan [School of Dentistry, Kung Hee University, Seoul (Korea, Republic of); Yu, Jae Jung [Kangdong Scared Heart Hospital, Hallym Medical Center, Seoul (Korea, Republic of)

2010-12-15

Aspergilloma of the paranasal sinus is a non-invasive form of aspergillosis, most often in the maxillary sinus. This case presents an 86-year-old female with aspergilloma of the left maxillary sinus. The patient's chief complaint was intermittent pain on the left maxillary first premolar area. A radiopacification of the left maxillary sinus was observed on the panoramic radiograph. Cone-beam computed tomography revealed complete radiopacification of the left maxillary sinus and scattered multiple radiopaque mass inside the lesion. Biopsy was performed under local anesthesia. On microscopic examination, numerous fungal hyphae, which branch at acute angle, were observed. The diagnosis was made as an aspergilloma based on the histopathologic examination.

Comparison of maxillary stability after Le Fort I osteotomy for occlusal cant correction surgery and maxillary advanced surgery.

Science.gov (United States)

Ueki, Koichiro; Hashiba, Yukari; Marukawa, Kohei; Yoshida, Kan; Shimizu, Chika; Nakagawa, Kiyomasa; Yamamoto, Etsuhide

2007-07-01

To compare postoperative maxillary stability following Le Fort I osteotomy for the correction of occlusal cant as compared with conventional Le Fort I osteotomy for maxillary advancement. The subjects were 40 Japanese adults with jaw deformities. Of these, 20 underwent a Le Fort I osteotomy and intraoral vertical ramus osteotomy (IVRO) to correct asymmetric skeletal morphology and inclined occlusal cant. The other 20 patients underwent a Le Fort I osteotomy and sagittal split ramus osteotomy (SSRO) to advance the maxilla. Lateral and posteroanterior cephalograms were taken postoperatively and assessed statistically. Thereafter, the 2 groups were followed for time-course changes. There was no significant difference between the 2 groups with regard to time-course changes during the immediate postoperative period. This suggests that maxillary stability after Le Fort I osteotomy for cant correction does not differ from that after Le Fort I osteotomy for maxillary advancement.

Maxillary palp glomeruli and ipsilateral projections in the antennal ...

Indian Academy of Sciences (India)

Maxillary palp glomeruli and ipsilateral projections in the antennal lobe of Drosophila melanogaster. K P Rajashekhar V R ... The number of glomeruli receiving the maxillary palp sensory projections tallies with the number of Drosophila olfactory receptors (seven) reported to be expressed exclusively in the maxillary palp.

Reliability of Rehabilitative Ultrasonography to Measure Transverse Abdominis and Multifidus Muscle Dimensions

International Nuclear Information System (INIS)

Nabavi, Narjes; Mosallanezhad, Zahra; Haghighatkhah, Hamid Reza; Mohseni Bandpeid, Mohammad Ali

2014-01-01

Lumbar paraspinal muscles play an important role in providing both mobility and stability during dynamic tasks. Among paraspinal muscles, transverse abdominis and lumbar multifidus have been of particular interest as active stabilizers of the lumbar spine. These muscles may become dysfunctional in chronic low back pain (CLBP). Low back injury can result in muscle inhibition and control loss that cannot recover spontaneously, and specific exercises are required to stimulate their recovery. The purpose of this study was to test the reliability of ultrasonography to measure muscle dimensions and to present a reliable method for measuring transverse abdominis and lumbar multifidus as stabilizing muscles of the lumbar spine. Fifteen healthy participants (18-55 year olds) were evaluated by a radiologist using ultrasonography (ES500) with two probes (50mm linear 7.5 MHZ and 70 mm curvilinear 3.5 MHz). The muscle thickness of transverse abdominis and the anterior-posterior diameter and cross sectional area of the LMF were measured. To determine within and between days reliabilities, second and third measurements were repeated with half an hour and one week intervals, respectively. Intraclass correlation coefficient for left and right showed good to high reliability for the cross sectional area of lumbar multifidi (0.74 and 0.88, respectively) as well as the anterior-posterior dimensions of lumbar multifidi (0.89 and 0.91, respectively) and transverse abdomini thickness (0.73 and 0.85, respectively). Rehabilitative ultrasonography is a reliable and non-invasive instrument to measure muscle thickness. The method used in this study is a reliable way to measure lumbar stabilizing muscles

[Percutaneous maxillary nerve block anesthesia in maxillofacial surgery].

Science.gov (United States)

Robiony, M; Demitri, V; Costa, F; Politi, M

1999-01-01

Personal experience in percutaneous maxillary nerve block anesthesia in association with transmucosal anesthesia of the sphenopalatine ganglion in oral and maxillofacial surgery, is presented. Six Caldwell-Luc, 9 anthrotomies and biopsies of maxillary sinus, 8 removals of extensive odontogenic cysts and 12 surgical maxillary expansions were performed from 1994 to 1996 at our Department. Maxillary transcutaneous nerve block in association with transmucosal anesthesia of the sphenopalatine ganglion were performed. Carbocaine without adrenaline in association with NaCO3 1/10 for maxillary nerve block anesthesia and lidocaineoprilocaine cream (EMLA) for transmucosal anesthesia were employed. Intra- and post-operative pain were evaluated by visual analogue scale in all the patients. Anesthesiological procedures revealed to be effective in all surgical interventions and postoperative analgesia allowed easier pain control. The simplicity of execution, the effective pre- and postoperative anesthesia and the absence of side effects make this procedure particularly indicated in oral and maxillofacial surgery.

Root Length and Anatomy of Impacted Maxillary Canines in Patients with Unilateral Maxillary Canine Impaction

OpenAIRE

Mostfa Shahabi; Maryam Omidkhoda; Seyedeh Haniyeh Omidi; Seyed Hosein Hoseini Zarch

2017-01-01

Introduction: Canine impaction is a common occurrence. In this study, we sought to investigate the root anatomy and length of impacted canines and lateral incisor adjacent to impacted maxillary canine. Materials and Methods: In this retrospective study, three-dimensional tomographic imaging was performed on 26 patients with unilateral maxillary canine impaction. In this study, we evaluated root length and anatomy of impacted canines, in terms of resorption intensity and curvature, with Planme...

Maxillary distraction complications in cleft patients.

Science.gov (United States)

Jeblaoui, Y; Morand, B; Brix, M; Lebeau, J; Bettega, G

2010-06-01

Cleft lip and palate (CLP) patients often present with a class III malocclusion in connection with a three dimensional maxillary hypoplasia. Twenty-five to 60% of these patients need maxillary advancement. Two solutions are possible: orthognathic surgery and maxillary distraction. The purpose of this study was to evaluate the complications of maxillary distraction in CLP patients. Data was collected from the records of patients treated in our surgery unit between 2000 and 2007. Among the eight patients (four male and four female), five presented with a bilateral CLP, two with a unilateral CLP, and one with a unilateral cleft lip associated to a soft palate cleft. The average age at surgery was 17 years. All underwent a Le Fort I osteotomy with a pterygomaxillary disjunction. An external distractor was used for the first two patients and an internal distractor for the six following patients. After a seven-day latency, activation was implemented at a rate of 1mm twice a day. The average period of consolidation was four months. Maxillary advancement ranged between 7 and 19mm, with an average of 12.6mm. The average follow-up was four years. Complications were noted in seven patients: one intra-operative hemorrhage, one avulsion of a tooth anchored at the pterygoid process during osteotomy, three cases of device dysfunction, two cases of significant pain during activation, one loosening of the orthodontic arch in an external system, two cases of labial ulceration, and one maxillary sinusitis due to migration of a wisdom tooth. Complications of maxillary distraction in CLP patients were very frequent. Most were related to the device and did not interfere with the final result. This must be taken into account when indicating distraction and choosing the device. Two types of complications can occur during distraction: those related to the osteotomy and those related to the device. The complications related to the osteotomy are linked to the cicatricial ground of previous

[Maxillary distraction complications in cleft patients].

Science.gov (United States)

Jeblaoui, Y; Morand, B; Brix, M; Lebeau, J; Bettega, G

2008-09-01

Cleft lip and palate (CLP) patients often present with a class III malocclusion in connection with a three dimensional maxillary hypoplasia. Twenty-five to 60% of these patients require a maxillary advancement. Two solutions are possible: orthognathic surgery and maxillary distraction. The purpose of this study was to evaluate the complications of the maxillary distraction in CLP patients. Data was collected from the records of patients treated at our Surgery Unit between 2000 and 2007. Among the eight patients (four male and four female), five presented a bilateral CLP, two a unilateral CLP and one a unilateral cleft lip associated to a soft palate cleft. The average age at surgery was 17 years old. All had a Le Fort I osteotomy with a pterygomaxillary disjunction. The first two patients had external distractors and the six following internal ones. After a seven-day latency, activation was led to the rate of 1mm per day twice. The period of consolidation was four months on average. The maxillary advancement varied between 7 and 19 mm with an average of 12.6mm. The average follow-up was four years. We encountered difficulties and/or complications in seven patients: one intraoperatively haemorrhage, one avulsion of a tooth fixed at the pterygoid process during the osteotomy, three device failures, two cases of significant pains during activation, one dissociation of the dental anchorage of an external system, two labial ulcerations and one maxillary sinusitis by migration of the 18. Difficulties of maxillary distraction in CLP patients are very frequent. The majority is related to the distractors and did not interfere with the final result. But this frequency must be taken into account in the indication and in the choice of the material. Two types of complications can occur during distraction: those related to the osteotomy and those related to the material. The complications related to the osteotomy are in connection with the cicatricial ground of the CLP. They are

Le Fort I Maxillary Advancement Using Distraction Osteogenesis

OpenAIRE

Combs, Patrick D.; Harshbarger, Raymond J.

2014-01-01

Treatment of maxillary hypoplasia has traditionally involved conventional Le Fort I osteotomies and advancement. Advancements of greater than 10 mm risk significant relapse. This risk is greater in the cleft lip and palate population, whose anatomy and soft tissue scarring from prior procedures contributes to instability of conventional maxillary advancement. Le Fort I advancement with distraction osteogenesis has emerged as viable, stable treatment modality correction of severe maxillary hyp...

Tooth-Borne Anterior Maxillary Distraction for Cleft Maxillary Hypoplasia: Our Experience With 147 Patients.

Science.gov (United States)

Richardson, Sunil; Selvaraj, Dhivakar; Khandeparker, Rakshit V; Seelan, Nikkie S; Richardson, Shweta

2016-12-01

To evaluate the results of anterior maxillary distraction for its efficacy and long-term stability in the management of cleft maxillary hypoplasia in a large series of patients with a long-term follow-up extending to 4 years. One hundred sixty-four patients at least 10 years old with cleft maxillary hypoplasia who presented to the authors' unit from January 2009 through October 2014 were evaluated retrospectively, irrespective of gender, type of cleft lip and palate, and amount of advancement needed. Anterior maxillary distraction using a tooth-borne distractor appliance was carried out in all patients and all patients were followed up to 4 years (range, 1 to 4 yr) to evaluate the stability of the procedure and to document any relapse using digitalized lateral cephalograms taken before distraction, immediately after distraction (T2), and at the last follow-up visit (T3; range, 1 to 4 yr). Seventeen patients were subsequently lost to follow-up; therefore, a complete set of records was available for 147 patients. In a subset of 50 patients, perceptual speech assessment was carried out preoperatively and 6 months postoperatively by 2 speech pathologists using the Perkins scoring system that allowed the evaluation of 5 parameters (velopharyngeal insufficiency, resonance, nasal air emission, articulation, and intelligibility). None of these patients underwent speech therapy during the course of evaluation. The development of complications intra- or postoperatively was noted. The data were tabulated and analyzed. An advancement ranging from 4.0 to 13.1 mm (mean, 9.42 mm) was achieved in all patients. One hundred forty patients (95.23%) showed stable results on lateral cephalograms and when T2 values were compared with T3 values. Seven patients (4.76%) exhibited skeletal relapse in various linear and angular measurements assessed on lateral cephalograms. At 6-month follow-up, improvements of 62% (n = 31), 64% (n = 32), 50% (n = 25), 68% (n = 34), and 70% (n

Le Fort I Maxillary Advancement Using Distraction Osteogenesis

Science.gov (United States)

Combs, Patrick D.; Harshbarger, Raymond J.

2014-01-01

Treatment of maxillary hypoplasia has traditionally involved conventional Le Fort I osteotomies and advancement. Advancements of greater than 10 mm risk significant relapse. This risk is greater in the cleft lip and palate population, whose anatomy and soft tissue scarring from prior procedures contributes to instability of conventional maxillary advancement. Le Fort I advancement with distraction osteogenesis has emerged as viable, stable treatment modality correction of severe maxillary hypoplasia in cleft, syndromic, and noncleft patients. In this article, the authors provide a review of current data and recommendations concerning Le Fort I advancement with distraction osteogenesis. In addition, they outline their technique for treating severe maxillary hypoplasia with distraction osteogenesis using internal devices. PMID:25383054

Simplified Model Surgery Technique for Segmental Maxillary Surgeries

Directory of Open Access Journals (Sweden)

Namit Nagar

2011-01-01

Full Text Available Model surgery is the dental cast version of cephalometric prediction of surgical results. Patients having vertical maxillary excess with prognathism invariably require Lefort I osteotomy with maxillary segmentation and maxillary first premolar extractions during surgery. Traditionally, model surgeries in these cases have been done by sawing the model through the first premolar interproximal area and removing that segment. This clinical innovation employed the use of X-ray film strips as separators in maxillary first premolar interproximal area. The method advocated is a time-saving procedure where no special clinical or laboratory tools, such as plaster saw (with accompanying plaster dust, were required and reusable separators were made from old and discarded X-ray films.

Bilateral supernumerary primary maxillary canines

Directory of Open Access Journals (Sweden)

Santanu Mukhopadhyay

2018-01-01

Full Text Available Supernumerary teeth are more common in the permanent than in primary dentition. In the primary dentition, the anomaly is most frequently observed in the maxillary lateral incisor region, followed by the maxillary midline where they are termed as mesiodens. Supernumerary teeth in the primary canine region are rare. This paper describes a rare case of nonsyndromic supernumerary primary maxillary canine distributed bilaterally in a 4-year-old boy. Both the supernumeraries resembled size and shape of normal primary canine. The right supplemental canine is high labially placed, whereas the left one is seen normally aligned in the dental arch distal to lateral incisor. One of the most significant sequelae of primary supernumerary teeth is their duplication in the permanent series. Radiographic examination of supernumerary primary canine did not indicate any such anomaly in the permanent dentition. The patient was kept under observation.

Factors affecting visualization of posterior rib fractures in abused infants

International Nuclear Information System (INIS)

Kleinman, P.K.; Adams, V.I.; Blackbourne, B.D.; Marks, S.C.

1987-01-01

Rib fractures in abused infants commonly occur in the posterior rib arcs. Fractures occurring near the costovertebral articulations are usually identified radiographically only once callus has formed. To assess the factors influencing the visibility of fractures near the costovertical articulations, the authors studied 103 posterior rib fractures occurring in 16 abused infants. Radiologic findings were correlated with CT findings and pathologic material from nine ribs in four patients. The limited visibility of fractures relates to (1) the frequent superimposition of the transverse process over the rib fracture site, (2) a fracture line that crosses at an obliquity to the x-ray beam, and (3) nondisplacement of rib fragments due to preservation of the posterior periosteum. Fresh rib fractures invisible on a frontal projection may be clearly defined on axial CT scans, or on postmortem radiographs. A knowledge of the factors influencing the visibility of these important injuries is useful in planning an appropriate diagnostic evaluation of suspected infant abuse

Isolated Transverse Clivus Fracture without Neurodeficit: Case Report and Review of Literature

International Nuclear Information System (INIS)

Akar, Ömer; Yaldiz, Can; Özdemir, Nail; Yaman, Onur; Dalbayrak, Sedat

2015-01-01

Clivus is a bony surface in the posterior cranial fossa, serving as the support of the brainstem and thus neighboring important structures because of its location. Skull base fractures that cannot be shown by conventional radiography can be clearly imaged by high-resolution bone window computed tomography. A 44 years-old male referred to the emergency department because of a traffic accident in the car. His only complaint was a severe neckache. His X-ray examination showed no pathology. The computed tomographic examination showed no parenchymal pathology, but a isolated transverse fracture in the clivus. The computed tomographic examination showed isolated transverse fracture in the clivus our case presented in this paper is the first case of transverse clivus fracture without additional cranial bone fracture and neurologic deficit in the literature

Photographic assessment of nasal morphology following rapid maxillary expansion in children

Science.gov (United States)

da SILVA FILHO, Omar Gabriel; LARA, Tulio Silva; AYUB, Priscila Vaz; OHASHI, Amanda Sayuri Cardoso; BERTOZ, Francisco Antônio

2011-01-01

Objective The aim of the present study was to use facial analysis to determine the effects of rapid maxillary expansion (RME) on nasal morphology in children in the stages of primary and mixed dentition, with posterior cross-bite. Material and Methods Facial photographs (front view and profile) of 60 patients in the pre-expansion period, immediate post-expansion period and one year following rapid maxillary expansion with a Haas appliance were evaluated on 2 occasions by 3 experienced orthodontists independently, with a 2-week interval between evaluations. The examiners were instructed to assess nasal morphology and had no knowledge regarding the content of the study. Intraexaminer and interexaminer agreement (assessed using the Kappa statistic) was acceptable. Results From the analysis of the mode of the examiners' findings, no alterations in nasal morphology occurred regarding the following aspects: dorsum of nose, alar base, nasal width of middle third and nasal base. Alterations were only detected in the nasolabial angle in 1.64% of the patients between the pre-expansion and immediate post-expansion photographs. In 4.92% of the patients between the immediate post-expansion period and 1 year following expansion; and in 6.56% of the patients between the pre-expansion period and one year following expansion. Conclusion RME performed on children in stages of primary and mixed dentition did not have any impact on nasal morphology, as assessed using facial analysis. PMID:21986660

Odontogenic maxillary sinusitis diagnosed using conebeam x-ray CT

International Nuclear Information System (INIS)

Sato, Kiminori

2007-01-01

We evaluated the usefulness of conebeam x-ray CT in the diagnosis of odontogenic maxillary sinusitis in 21 patients. Among teeth causing odontogenic maxillary sinusitis, 95% had apical lesions after root canal treatment. Most root canals were filled with filling materials incompletely. Apical lesions in inappropriately treated teeth thus caused odontogenic maxillary sinusitis. Conebeam CT involves 3-dimensional isotropic voxel image date in up to 512 frames for transaxial, coronal, and sagittal planes, so resolution in imaging on the body axis was especially high. Multiplanar reconstruction and volume rendering images at any optional plane could be obtained without interpolation. The relationship between causative teeth and the maxillary sinus could be observed and measured, and odontogenic maxillary sinusitis accurately diagnosed. In addition to the accurate diagnosis of apical lesions, maxilla, and maxillary sinus, periodontal ligament space, lamina dura, pulp cavity, root canal, canal-treated root, apical periodontitis, alveolar ostitis, marginal periodontitis of causative teeth could be observed. Metal artifacts were minimized, making conebeam CT useful in the diagnosis of periodontal tissue and causative teeth, including root-canal-treated and crown-restored teeth. (author)

Surgical-Orthodontic Treatment of Gummy Smile with Vertical Maxillary Excess

Directory of Open Access Journals (Sweden)

Sumit Kumar Yadav

2014-01-01

Full Text Available Vertical maxillary excess is a well-defined clinical entity with several treatment options available. Treatment of the condition requires extremely well-coordinated orthodontic and surgical treatment planning and execution. This case report describes a multidisciplinary approach in the successful management of a patient with severe vertical maxillary excess. Careful selection and good execution of a surgical-orthodontic treatment plan in the management of vertical maxillary excess provided the superior esthetic and functional results in this case. Maxillary Le Forte 1 procedure was performed for vertical maxillary impaction along with anterior segmental setback. The presented technique was unique as it shortened the treatment time and esthetic results in smile and vertical proportions were achieved.

The radiographic localization of unerupted maxillary incisors and supernumeraries

International Nuclear Information System (INIS)

Kim, Jae Duk; Lee, Chang Yul; You, Choong Hyun

2003-01-01

To evaluate the use of the vertical tube shift from a panoramic film and a periapical film to localize unerupted maxillary incisors and supernumeraries. The total of 103 displaced maxillary incisors or embedded supernumeraries were examined in this study. The vertical tube shift technique with panoramic and periapical radiography by normal projection taken and compared to localize the position of the embedded maxillary incisors or supernumeraries by a radiologist and 5 general dentists. The gold standard used for the radiographic comparisons was the true position of the embedded tooth as confirmed by horizontal tube shift technique using three periapical radiographs. The general dentist examiners were instructed on the use of the modified acronym 'SLDOBU' by the radiologist as it pertains to panoramic radiographs as the principle of vertical tube shift. All of the embedded maxillary incisors and supernumeraries were successfully located using the vertical tube shift from a panoramic and a maxillary anterior periapical radiograph by the radiologist and 5 general dentists. The use of a panoramic film with a periapical film combination for a vertical tube shift can be useful to localize unerupted maxillary incisors and supernumeraries.

Two cases of congenital defects within transverse processes of lumbar spine; Dwa przypadki wad wrodzonych wyrostkow poprzecznych ledzwiowego odcinka kregoslupa

Energy Technology Data Exchange (ETDEWEB)

Malawski, S.; Sokolski, B. [Klinika Ortopedii, Centrum Medyczne Ksztalcenia Podyplomowego, Otwock (Poland)

1993-12-31

Two cases of congenital defects of transverse processes of lumbar spine causing lumbalgia are described. The first one was produced by direct contact of the elongated processes with subsequent pseudoarthrosis. Hypertrophied processes caused stenosis around intervertebral foramen and irritated posterior neural branch in the second case. Surgical resection of the hypertrophied transverse processes has brought the cure. (author). 4 refs, 6 figs.

Finite element analysis and clinical complications in mandibular implant-overdentures opposing maxillary dentures.

Science.gov (United States)

Khuder, Tameem; Yunus, Norsiah; Sulaiman, Eshamsul; Dabbagh, Ali

2017-11-01

Denture fracture is a common clinical complication caused by improper material selection, design, or fabrication technique. This study aimed to investigate the effect of two attachment systems on fracture risk of the implant-overdentures (IOD) via finite element analysis (FEA), using the force distributions obtained from patients' occlusal analyses and to compare the obtained results with the clinical complications associated with these attachments. A three-dimensional jaw model comprised of the edentulous bones was constructed. Three types of mandibular prostheses including complete denture (CD) (model LCD), IOD with Locator attachment (model LID-L), and IOD with telescopic attachment (model LID-T), as well as a maxillary CD (model UCD) were assembled. The vertical occlusal forces at anterior and posterior quadrants were obtained from the patients wearing mandibular CDs or IODs. The FEA results were further compared with the mechanical failures of different prostheses observed at patient recalls. In overall, the fracture risk of mandibular prostheses was lower than the maxillary compartments. The UCD opposing LCD underwent higher strains than that opposing LID-L and LID-T, which was mostly concentrated at the anterior mid-palatal polished surface. On the other hand, LID-L showed the lowest strain, followed by LID-T, and LCD. The obtained results were consistent with the clinical complications observed in the patient recalls. Copyright © 2017 Elsevier Ltd. All rights reserved.

A comparative study of retention of complete denture base with different types of posterior palatal seals – an in vivo study

Directory of Open Access Journals (Sweden)

Chandu GS

2014-11-01

Full Text Available GS Chandu,1 BS Hema,2 Harsh Mahajan,1 Antriksh Azad,2 Ipsita Sharma,3 Anurag Azad4 1Department of Prosthodontics, Rishiraj College of Dental Sciences and Research Centre, Bhopal, Madhya Pradesh, India; 2Department of Conservative Dentistry, Rishiraj College of Dental Sciences and Research Centre, Bhopal, Madhya Pradesh, India; 3Department of Oral Pathology, RKDF Dental college and Research centre, Bhopal, Madhya Pradesh, India; 4Department of Oral and Maxillofacial Surgery, Bhabha College of Dental Sciences and Research Centre, Bhopal, Madhya Pradesh, India Aim: To evaluate retention of complete denture base with different types of posterior palatal seals. Material and methods: Ten male patients between the age group of 50 years to 60 years were selected for the study. After the primary and secondary impressions were taken, five casts were made including a cast without posterior palatal seal, a cast with single bead posterior palatal seal, a cast with double bead posterior palatal seal, a cast with butterfly shaped posterior palatal seal, and a cast with posterior palatal seal with low fusing compound by functional method. Results: It was observed that retention increased up to 108% in the posterior palatal seal with low fusing compound with functional method and the posterior palatal seal that was obtained by using functional method provided greater retention than a denture base without posterior palatal seal. Conclusion: It was concluded that the incorporation of a posterior palatal seal is important for obtaining optimum retention of the maxillary complete denture. Keywords: posterior palatal seal, denture base, complete denture, functional method

Assessment of the dental and skeletal effects of fan-type rapid maxillary expansion screw and Hyrax screw on craniofacial structures

Directory of Open Access Journals (Sweden)

Umarevathi Gopalakrishnan

2017-01-01

Full Text Available Aims and Objectives: The purpose of the study was to assess the skeletal and dental effects of fan-type rapid maxillary expansion (RME appliance and Hyrax RME appliance on the craniofacial structures. Materials and Methods: The sample of the study included 12 patients with constricted maxillary arches. Acrylic bonded type of attachment was used for both groups. Changes in sagittal, vertical, and transverse relationship were assessed with lateral and frontal cephalograms, respectively. Intercanine and intermolar widths were measured with stone models. Pre- and immediate post-treatment records were statistically analyzed with Wilcoxon signed-rank test. The differences between the groups were evaluated using Mann–Whitney U-test. Since the data pertaining to intercanine width and intermolar width were normally distributed, parametric test of signifi cance (unpaired t-test was used to compare them. Results: Results showed that Hyrax presented with signifi cantly greater increments for both nasal cavity width and maxillary width when compared to fan-type RME. Both groups had retroclination of incisors. The increase in the intercanine width was almost similar in both groups. Conclusion: Fan-type RME caused only minimal expansion of the intermolar width when compared to the Hyrax. The ratio between the intercanine and intermolar width expansion was nearly 4:1 in the fan-type RME and 0.75:1 in Hyrax.

Ectopic third molar in maxillary sinus: A rare case report

Directory of Open Access Journals (Sweden)

Abhishek Sinha

2017-01-01

Full Text Available Ectopic tooth eruption in a non-dental area is a rare entity, and is most common in oral cavity. There have been a few case reports of teeth erupting in mandibular condyle, chin, palate, coronoid process, and maxillary sinus. Ectopic tooth in the maxillary sinus are found incidentally on routine radiological examination, same time they can be symptomatic and associated with pathologies usually dentigerous cyst or odontogenic keratocyst. Facial pain, purulent rhinorrhoea, epistaxis, headache, swelling, and epiphora-related naso-lacrimal duct obstruction can also be seen. By Caldwell-Luc procedure the ectopic teeth within the maxillary sinus are often removed. In this study, a case of ectopic maxillary third molar tooth on right maxillary sinus is presented.

Agenesis of maxillary lateral incisors and associated dental anomalies.

Science.gov (United States)

Garib, Daniela Gamba; Alencar, Bárbara Maria; Lauris, José Roberto Pereira; Baccetti, Tiziano

2010-06-01

The objectives of this study were to evaluate the prevalence of dental anomalies in patients with agenesis of maxillary lateral incisors and to compare the findings with the prevalence of these anomalies in the general population. A sample of 126 patients, aged 7 to 35 years, with agenesis of at least 1 maxillary lateral incisor was selected. Panoramic and periapical radiographs and dental casts were used to analyze other associated dental anomalies, including agenesis of other permanent teeth, ectopia of unerupted permanent teeth, microdontia of maxillary lateral incisors, and supernumerary teeth. The occurrence of these anomalies was compared with prevalence data previously reported for the general population. Statistical testing was performed with the chi-square test (P <0.05) and the odds ratio. Patients with maxillary lateral incisor agenesis had a significantly increased prevalence rate of permanent tooth agenesis (18.2%), excluding the third molars. The occurrence of third-molar agenesis in a subgroup aged 14 years or older (n = 76) was 35.5%. The frequencies of maxillary second premolar agenesis (10.3%), mandibular second premolar agenesis (7.9%), microdontia of maxillary lateral incisors (38.8%), and distoangulation of mandibular second premolars (3.9%) were significantly increased in our sample compared with the general population. In a subgroup of patients aged 10 years or older (n = 115), the prevalence of palatally displaced canines was elevated (5.2%). The prevalences of mesioangulation of mandibular second molars and supernumerary teeth were not higher in the sample. Permanent tooth agenesis, maxillary lateral incisor microdontia, palatally displaced canines, and distoangulation of mandibular second premolars are frequently associated with maxillary lateral incisor agenesis, providing additional evidence of a genetic interrelationship in the causes of these dental anomalies. 2010 American Association of Orthodontists. Published by Mosby, Inc. All

[Dental-radical cysts, a rare aetiology of maxillary sinus opacity].

Science.gov (United States)

Bassou, D; Darbi, A; Elkharras, A; Elhaddad, A; Boumdin, H; Amil, T; Benameur, M; Chaouir, S

2007-12-01

To specify CT scan roll in diagnosis of radicullar cyst invading maxillary sinus. Two cases of 23 and 34-year-old men presented with facial injury and sinusitis was explored by CT scan. CT scan showed in both patients a cystic lesion, developing into the maxillary sinus around a tooth apex and limits by a double dense thin rim. CT scan permits diagnosis of radicular cyst invading maxillary sinus, in the event of obscured maxillary sinus, when double dense thin rim corresponding to the repulsed wall of the sinus is looking.

A prospective study of the short-term treatment effects of the acrylic-splint rapid maxillary expander combined with the lower Schwarz appliance.

Science.gov (United States)

Wendling, Lisa K; McNamara, James A; Franchi, Lorenzo; Baccetti, Tiziano

2005-01-01

This prospective clinical study evaluated the short-term treatment effects of acrylic-splint rapid maxillary expander in conjunction with lower Schwarz appliance (RME-Sz) therapy to the acrylic-splint rapid maxillary expansion alone (RME-only group). Pretreatment and posttreatment lateral cephalograms were analyzed for 25 RME patients and 19 RME-Sz patients. The average time between films ranged between nine and 12 months. Statistical comparisons of the treatment changes in the RME-only and RME-Sz groups were performed by means of independent sample t-tests (P < .05). The largest difference between the two groups was in lower anterior facial height (LAFH). The normally occurring increase in LAFH was not observed in the RME-only group during the treatment period, indicating that the acrylic-splint expander had a posterior "bite block effect" on the developing craniofacial complex. LAFH increased by 1.7 mm in the RME-Sz group, a value similar to that observed in untreated individuals. Slight forward displacement of the maxilla was observed when RME was used alone, and the sagittal position of the maxilla remained unchanged in the RME-Sz group. A significant amount of intrusion of the maxillary molars (-0.8 mm) was noted in the RME-only group, whereas the maxillary molars were prevented from erupting in the RME-Sz group. The lower dentition showed a significantly greater amount of extrusion in the RME-Sz group than in the RME-only group. Finally, the Sz appliance prevented the mesial movement of the lower molars during the treatment period.

Anterior maxillary segmental distraction in the treatment of severe maxillary hypoplasia secondary to cleft lip and palate.

Science.gov (United States)

Li, Hongliang; Dai, Jiewen; Si, Jiawen; Zhang, Jianfei; Wang, Minjiao; Shen, Steve Guofang; Yu, Hongbo

2015-01-01

Anterior maxillary segmental distraction (AMSD) is an effective surgical procedure in the treatment of maxillary hypoplasia secondary to cleft lip and palate. Its unique advantage of preserving velopharyngeal function makes this procedure widely applied. In this study, the application of AMSD was described and its long-term stability was explored. Eight patients with severe maxillary hypoplasia secondary to CLP were included in this study. They were treated with AMSD using rigid external distraction (RED) device. Cephalometric analysis was performed twice at three time points for evaluation: before surgery (T1), after distraction (T2), and 2 years after treatment (T3). One-way analysis of variance was used to assess the differences statistically. All the distractions completed smoothly, and maxilla was distracted efficiently. The value of SNA, NA-FH, Ptm-A, U1-PP, overjet and PP (ANS-PNS) increased significantly after the AMSD procedure (P 0.05). Changes of palatopharyngeal depth and soft palatal length were insignificant. AMSD with RED device provided an effective way to correct maxillary hypoplasia secondary to CLP, extended the palatal and arch length, avoided damage on velopharyngeal closure function and reduced the relapse rate. It is a promising and valuable technique in this potentially complicated procedure.

Human histologic evaluation of anorganic bovine bone mineral combined with recombinant human platelet-derived growth factor BB in maxillary sinus augmentation: case series study.

Science.gov (United States)

Nevins, Myron; Garber, David; Hanratty, James J; McAllister, Bradley S; Nevins, Marc L; Salama, Maurice; Schupbach, Peter; Wallace, Steven; Bernstein, Simon M; Kim, David M

2009-12-01

The objective of this proof-of-principle study was to examine the potential for improved bone regenerative outcomes in maxillary sinus augmentation procedures when recombinant human platelet-derived growth factor BB (0.3 mg/mL) is combined with particulate anorganic bovine bone mineral. The surgical outcomes in all treated sites were uneventful at 6 to 8 months, with sufficient regenerated bone present to allow successful placement of maxillary posterior implants. Large areas of dense, well-formed lamellar bone were seen throughout the intact core specimens in more than half of the grafted sites. Abundant numbers of osteoblasts were noted in concert with significant osteoid in all sites, indicating ongoing osteogenesis. A number of cores demonstrated efficient replacement of the normally slowly resorbing anorganic bovine bone mineral matrix particles with newly formed bone when the matrix was saturated with recombinant human platelet-derived growth factor BB.

Ecological and phylogenetic influences on maxillary dentition in snakes

Directory of Open Access Journals (Sweden)

Kate Jackson

2010-12-01

Full Text Available The maxillary dentition of snakes was used as a system with which to investigate the relative importance of the interacting forces of ecological selective pressures and phylogenetic constraints indetermining morphology. The maxillary morphology of three groups of snakes having different diets, with each group comprising two distinct lineages — boids and colubroids — was examined. Our results suggest that dietary selective pressures may be more significantthan phylogenetic history in shaping maxillary morphology.

Introduction of a new removable adjustable intraoral maxillary distraction system for correction of maxillary hypoplasia.

Science.gov (United States)

Figueroa, Alvaro A; Polley, John W; Figueroa, Alexander L

2009-09-01

Distraction osteogenesis has become a treatment alternative to treat severe craniofacial skeletal dysplasias. A rigid external distraction device has been successfully used to advance the maxilla as well as the maxillary, orbital, and forehead complex (monobloc) in children as young as 2 years, adolescents, and adults. For this severe group of patients, the technique has been found to be simpler and safer than traditional surgical methods. Maxillary and midfacial advancement through distraction has been found to be extremely stable in the patients in whom the technique was used.The authors introduce an intraoral distractor for those patients requiring a moderate maxillary advancement. The advantages of the device include ease of insertion, vector adjustability, reactivation capabilities, and no need for second procedure for its removal.The above approaches have provided predictable and stable results. A detailed description of the device, necessary orthodontic and surgical procedures, case reports, and cephalometric outcomes are presented. The techniques can be applied alone or as an adjunct to traditional orthognathic and craniofacial surgical procedures.

Maxillary Osteomyelitis: A Rare Entity

Directory of Open Access Journals (Sweden)

Ayaaz Habib

2016-01-01

Full Text Available Osteomyelitis of the maxilla is now a rare event with the advent of antibiotics. The two predominant causes are odontogenic infections and sinusitis. Immunocompromised states such as diabetes, HIV, and malnutrition increase the risk of osteomyelitis. It is important to recognize this early as it is a difficult entity to treat with potentially serious consequences. We report an unusual case of right sided maxillary osteomyelitis in a lady with poorly controlled diabetes in rural Lincolnshire. Biopsy of the right maxillary bone showed features of acute osteomyelitis. This responded well to a prolonged course of oral antibiotics.

Atypical presentation of bilateral supplemental maxillary central incisors with unusual talon cusp

Directory of Open Access Journals (Sweden)

Sivakumar Nuvvula

2011-01-01

Full Text Available Delayed eruption of maxillary permanent central incisors in a child poses a distressing esthetic quandary to parents, by virtue of its location in the dental architecture. Well-aligned anterior teeth add confidence to smile and have enhanced self-esteem, which is critical even in early life. Impaction of the maxillary central incisors compared to third molars or the canines is less reported; bilateral supplemental maxillary central incisors related to impacted permanent maxillary central incisors are rare and one of the supplemental central incisors showing unusual talon is still infrequent. A case of impacted maxillary permanent central incisors related to supplemental maxillary central incisors, with one of them showing an unusual talon cusp, is presented.

Maxillary sinus agenesis - report of two cases

International Nuclear Information System (INIS)

Pierre, Jorge Henrique Arraes de Alencar; Santana, Expedito Araujo

2000-01-01

Agenesis or aplasia of the maxillary sinuses is an extremely rare condition, and only eight cases have been reported in the world medical literature. These malformations may arise as a result of developmental defects. Two cases of unilateral agenesis of the maxillary sinus are presented and the radiological abnormalities and the embryology are discussed. The literature is also reviewed. (author)

Light weight hollow maxillary complete denture: A case series

Directory of Open Access Journals (Sweden)

Laxman Singh Kaira

2012-01-01

Full Text Available Retention, stability and support are the basic principles on which the success of a complete denture relies on. The skill lies in applying these principles efficiently in critical situations. Residual ridge resorption occurs at a three times faster rate in mandibular arch than in the maxillary arch. The severely resorbed maxillary and mandibular edentulous arches that are narrow and constricted with increased interarch space provide decreased support, retention and stability. The consequent weight of the processed complete denture only compromises them further. The severely resorbed jaw can have various treatment options. Extreme resorption of the maxillary denture-bearing area may lead to problems with prosthetic rehabilitation. The advantage of a hollow maxillary or mandibular denture is the reduction of excessive weight of acrylic resin, which normally replaces lost alveolar ridge in the interridge space of the denture wearer. This clinical report describes two case reports of edentulous patients with resorbed ridges where a simplified technique of fabricating a light weight hollow maxillary complete denture was used for the preservation of denture bearing areas.

Trans-sinusoidal maxillary distraction in three cleft patients.

NARCIS (Netherlands)

Wenghoefer, M.H.; Martini, M.; Nadjmi, N.; Schutyser, F.A.C.; Jagtman, A.K.; Bergé, S.J.

2006-01-01

The trans-sinusoidal maxillary distractor (TS-MD) was used to achieve maxillary advancement in three patients with repaired cleft lip and palate. After preoperative computer-aided planning of the distraction vectors, each TS-MD was bent on a stereolithographic model of the maxilla of the patient.

Treatment of severe maxillary cleft hypoplasia in a case with missing premaxilla with anterior maxillary distraction using tooth-borne hyrax appliance

Directory of Open Access Journals (Sweden)

Akshai Shetty

2015-01-01

Full Text Available Cleft orthodontics generally poses a challenge and a missing premaxilla adds to the difficulty in managing them. The lack of bone support and anterior teeth in a case with missing premaxilla accounts not only for difficulty in rehabilitation but also in increasing the maxillary hypoplasia. This article presents a case report where planned orthodontic and surgical management using distraction has helped treat a severe maxillary hypoplasia in a patient with missing premaxilla. The treatment plan and method can be used to treat severe maxillary hypoplasia and yield reasonably acceptable results for such patients.

Penetration of flomoxef into human maxillary and mandibular bones.

Science.gov (United States)

Igawa, H H; Sugihara, T; Yoshida, T; Kawashima, K; Ohura, T

1995-09-01

Penetration of flomoxef into the maxillary and mandibular bones was assayed clinically to provide data about its usefulness for the prevention of postoperative infection after maxillofacial surgery. Twenty-one patients undergoing maxillofacial surgery at our department were given flomoxef 2 g dissolved in 20 ml of physiological saline intravenously over 3 minutes during operation, and the serum, maxillary and mandibular concentrations were measured 1, 3, and 6 hours after injection by the band culture method using Escherichia coli 7437 as the indicator strain. The mean concentrations were 53.4, 16.1, and 2.6 micrograms/ml, respectively, in the serum, 17.6, 7.8, and 1.0 micrograms/g in maxillary bone, and 16.4, 4.2, and 0.9 micrograms/g in mandibular bone. The mean bone:serum ratios at 1, 3, and 6 hours were 33.0%, 48.2%, and 36.8%, respectively, for maxillary bone, and 30.7%, 26.2%, and 35.7% for mandibular bone. When compared with previously reported data on the bone:serum ratios in jaw of various other intravenous antibiotics, our results show that penetration of flomoxef into maxillary and mandibular bone is extremely high. As all the intramaxillary and intramandibular concentrations exceed its MIC80 values against clinical isolates of bacteria frequently isolated in cases of infection in the oral and maxillofacial region, it is apparent that one intravenous shot of flomoxef 2 g allows penetration of the drug into the maxillary and mandibular bones at effective concentrations. Flomoxef is therefore potentially useful for the prevention and treatment of infections in the oral and maxillofacial region, as it has excellent penetration into the maxillary and mandibular bones.

Transpalatal distraction for the management of maxillary constriction in pediatric patients.

Science.gov (United States)

Adolphs, Nicolai; Ernst, Nicole; Hoffmeister, Bodo; Raguse, Jan-Dirk

2015-01-01

The management of severe maxillary constriction can be challenging. For that purpose surgically assisted maxillary expansion by transpalatal distraction (TPD) can typically be recommended after skeletal maturity. However in selected cases bone borne transpalatal distraction devices can contribute to improve maxillary constriction considerably earlier already during mixed dentition. To assess the possibility of bone borne transpalatal distraction in pediatric patients. Clinical paper. Since 2010 TPD has been applied to six pediatric patients during mixed dentition when severe maxillary constriction was present and conventional orthodontic widening has already failed. Individually selected devices (Surgitec, Belgium) were inserted in general anaesthesia and distraction was performed according to well known parameters. Maxillary constriction could be improved in all six patients without any drawbacks by bone borne devices during mixed dentition. Skeletal conditions were obviously improved for subsequent orthodontic or orthognathic therapy without functional impairment. Follow-up is up to 36 months after device removal. Transpalatal Distraction is recommendable in selected pediatric patients if massive growth disturbance is present or has to be expected. TPD allows for individually adapted maxillary expansion by selection and positioning of appropriate devices in combination with intraoperative testing of maxillary movements and controlled bone removal.

Management of an impacted and transposed maxillary canine

Directory of Open Access Journals (Sweden)

Deepti A

2010-03-01

Full Text Available Maxillary canine-lateral incisor transposition is a relatively rare anomaly, with both dental and facial esthetic implications. This is a case report of a maxillary canine-lateral incisor transposition that was successfully treated by surgical-orthodontic treatment followed by esthetic reshaping of the involved teeth.

An unusual stress fracture: Bilateral posterior longitudinal stress fracture of tibia.

Science.gov (United States)

Malkoc, Melih; Korkmaz, Ozgur; Ormeci, Tugrul; Oltulu, Ismail; Isyar, Mehmet; Mahirogulları, Mahir

2014-01-01

Stress fractures (SF) occur when healthy bone is subjected to cyclic loading, which the normal carrying range capacity is exceeded. Usually, stress fractures occur at the metatarsal bones, calcaneus, proximal or distal tibia and tends to be unilateral. This article presents a 58-year-old male patient with bilateral posterior longitudinal tibial stress fractures. A 58 years old male suffering for persistent left calf pain and decreased walking distance for last one month and after imaging studies posterior longitudinal tibial stress fracture was detected on his left tibia. After six months the patient was admitted to our clinic with the same type of complaints in his right leg. All imaging modalities and blood counts were performed and as a result longitudinal posterior tibial stress fractures were detected on his right tibia. Treatment of tibial stress fracture includes rest and modified activity, followed by a graded return to activity commensurate with bony healing. We have applied the same treatment protocol and our results were acceptable but our follow up time short for this reason our study is restricted for separate stress fractures of the posterior tibia. Although the main localization of tibial stress fractures were unilateral, anterior and transverse pattern, rarely, like in our case, the unusual bilateral posterior localization and longitudinal pattern can be seen. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Mass in right maxillary

International Nuclear Information System (INIS)

Marins, J.L.C.

1988-01-01

A radiological study in a patient with increasing of the volume in the naso-maxillary region was done. The proposed diagnosis were carcinomas, lymphomas, sarcomas, teeth cyst, granulomas, mycoses and other. (L.M.J.)

Estimation of Absorbed Dose in Occlusal Radiography

International Nuclear Information System (INIS)

Yoo, Young Ah; Choi, Karp Shick; Lee, Sang Han

1990-01-01

The purpose of this study was to estimate absorbed dose of each important anatomic site of phantom (RT-210 Head and Neck Section R, Humanoid Systems Co., U.S.A.) head in occlusal radiography. X-radiation dosimetry at 12 anatomic sites in maxillary anterior topography, maxillary posterior topography, mandibular anterior cross-section, mandibular posterior cross-section, mandibular anterior topographic, mandibular posterior topographic occlusal projection was performed with calcium sulfate thermoluminescent dosimeters under 70 Kvp and 15 mA, 1/4 second (8 inch cone ) and 1 second (16 inch cone) exposure time. The results obtained were as follows: Skin surface produced highest absorbed dose ranged between 3264 mrad and 4073 mrad but there was little difference between projections. In maxillary anterior topographic occlusal radiography, eyeballs, maxillary sinuses, and pituitary gland sites produced higher absorbed doses than those of other sites. In maxillary posterior topographic occlusal radiography, exposed eyeball site and exposed maxillary sinus site produced high absorbed doses. In mandibular anterior cross-sectional occlusal radiography, all sites were produced relatively low absorbed dose except eyeball sites. In Mandibular posterior cross-sectional occlusal radiography, exposed eyeball site and exposed maxillary sinus site were produced relatively higher absorbed doses than other sites. In mandibular anterior topographic occlusal radiography, maxillary sinuses, submandibular glands, and thyroid gland sites produced high absorbed doses than other sites. In mandibular posterior topographic occlusal radiography, submandibular gland site of the exposed side produced high absorbed dose than other sites and eyeball site of the opposite side produced relatively high absorbed dose.

Modified hyrax splint for rapid maxillary expansion in esthetically concerned patients

Directory of Open Access Journals (Sweden)

Sarabjeet Singh Sandhu

2015-01-01

Full Text Available The orthodontic treatment of Class III malocclusion with a maxillary deficiency is often treated with maxillary protraction either with or without maxillary expansion. The routine procedure for rapid maxillary expansion includes banding on first premolars/first deciduous molars and the permanent first molars. However in some patients who are esthetically very conscious, banding of the first premolar would not be a good esthetic option. So for such circumstances we have designed a modified hyrax splint, which does not need the first premolars to be banded.

CASE REPORT - Maxillary Herpes Zoster with Corneal Involvement ...

African Journals Online (AJOL)

Corneal involvement in maxillary herpes zoster is very rare. This report presents the case of a 32 years old 7 months pregnant para2+1 female, who presented with vesiculopapular rashes with hyperpigmented crusts over the maxillary area of the face on the left side with periocular oedema, conjunctivitis and mild punctate ...

Bilateral postoperative maxillary cysts after orthognathic surgery: A case report

International Nuclear Information System (INIS)

Lee, Jung Hye; Huh, Kyung Hoe; Yi, Won Jin; Heo, Min Suk; Lee, Sam Sun; Choi, Soon Chul

2014-01-01

Postoperative maxillary cysts are locally aggressive lesions, usually developing as delayed complications many years after radical antral surgery. This report describes a case of bilateral postoperative maxillary cysts following orthognathic surgery performed approximately 21 years previously. The patient complained of stinging pain on her right cheek. Radiographic examination revealed low-attenuation lesions on both maxillary sinuses with discontinuously corticated margins without distinct expansion or bone destruction. The cysts were enucleated with the removal of metal plates and screws for pain relief. Histopathological examination confirmed the diagnosis of postoperative maxillary cysts lined by ciliated, pseudostratified columnar cells. The patient has remained asymptomatic thus far, and there was no evidence of local recurrence at 21 months of postoperative follow-up.

Bilateral postoperative maxillary cysts after orthognathic surgery: A case report

Energy Technology Data Exchange (ETDEWEB)

Lee, Jung Hye; Huh, Kyung Hoe; Yi, Won Jin; Heo, Min Suk; Lee, Sam Sun; Choi, Soon Chul [Dept. of Oral and Maxillofacial Radiology and Dental Research Institute, School of Dentistry, Seoul National University, Seoul (Korea, Republic of)

2014-12-15

Postoperative maxillary cysts are locally aggressive lesions, usually developing as delayed complications many years after radical antral surgery. This report describes a case of bilateral postoperative maxillary cysts following orthognathic surgery performed approximately 21 years previously. The patient complained of stinging pain on her right cheek. Radiographic examination revealed low-attenuation lesions on both maxillary sinuses with discontinuously corticated margins without distinct expansion or bone destruction. The cysts were enucleated with the removal of metal plates and screws for pain relief. Histopathological examination confirmed the diagnosis of postoperative maxillary cysts lined by ciliated, pseudostratified columnar cells. The patient has remained asymptomatic thus far, and there was no evidence of local recurrence at 21 months of postoperative follow-up.

Prevalence and location of the posterior superior alveolar artery using cone-beam computed tomography

Energy Technology Data Exchange (ETDEWEB)

Tehranchi, Maryam; Taleghani, Ferial; Shahab, Shahriar [Faculty of Dentistry, Shahed University, Tehran (Iran, Islamic Republic of); Nouri, Arash [Nouri' s Dental Clinic, Tehran (Iran, Islamic Republic of)

2017-03-15

Insufficient knowledge of the anatomy of the maxillary sinuses prior to sinus graft surgery may lead to perioperative or postoperative complications. This study sought to characterize the position of the posterior superior alveolar artery (PSAA) within the maxillary sinuses using cone-beam computed tomography (CBCT). A total of 300 patients with edentulous posterior maxillae, including 138 females and 162 males with an age range of 33-86 years, who presented to a radiology clinic between 2013 and 2015 were enrolled in this retrospective cross-sectional study. The distance from the inferior border of the PSAA to the alveolar crest according to the residual ridge classification by Lekholm and Zarb, the distance from the PSAA to the nasal septum and zygomatic arch, and the diameter and position of the PSAA were all assessed on patients' CBCT scans. The data were analyzed using the Mann-Whitney test and the t-test. The PSAA was detected on the CBCT scans of 87% of the patients; it was located beneath the sinus membrane in 47% of cases and was intraosseous in 47% of cases. The diameter of the artery was between 1 and 2 mm in most patients (72%). The mean diameter of the artery was 1.29±0.39 mm, and the mean distances from the PSAA to the zygomatic arch, nasal septum, and alveolar crest were 22.59±4.89 mm, 26.51±3.52 mm, and 16.7±3.96 mm, respectively. The likelihood of detecting the PSAA on CBCT scans is high; its location is intraosseous or beneath the sinus membrane in most patients. Determining the exact location of the PSAA on CBCT scans preoperatively can help prevent it from being damaged during surgery.

Maxillary incisors changes during space closure with conventional and skeletal anchorage methods: a systematic review.

Science.gov (United States)

Jayaratne, Yasas Shri Nalaka; Uribe, Flavio; Janakiraman, Nandakumar

2017-01-01

The objective of this systematic review was to compare the antero-posterior, vertical and angular changes of maxillary incisors with conventional anchorage control techniques and mini-implant based space closure methods. The electronic databases Pubmed, Scopus, ISI Web of knowledge, Cochrane Library and Open Grey were searched for potentially eligible studies using a set of predetermined keywords. Full texts meeting the inclusion criteria as well as their references were manually searched. The primary outcome data (linear, angular, and vertical maxillary incisor changes) and secondary outcome data (overbite changes, soft tissue changes, biomechanical factors, root resorption and treatment duration) were extracted from the selected articles and entered into spreadsheets based on the type of anchorage used. The methodological quality of each study was assessed. Six studies met the inclusion criteria. The amount of incisor retraction was greater with buccally placed mini-implants than conventional anchorage techniques. The incisor retraction with indirect anchorage from palatal mini-implants was less when compared with buccally placed mini-implants. Incisor intrusion occurred with buccal mini-implants, whereas extrusion was seen with conventional anchorage. Limited data on the biomechanical variables or adverse effects such as root resorption were reported in these studies. More RCT's that take in to account relevant biomechanical variables and employ three-dimensional quantification of tooth movements are required to provide information on incisor changes during space closure.

Effect of Relining Methods (Cold & Heat Cure On the Accuracy of Posterior

Directory of Open Access Journals (Sweden)

Nafiseh AsadzadehOghadaee

2013-01-01

Full Text Available Introduction: The posterior palatal area is the most important area for retention of maxillary dentures and must be considered carefully during and after the reline. The purpose of this in vitro study was to compare the posterior palatal seal in relined complete dentures with two different methods.Materials & Methods: An average size of edentulous maxillary acrylic arch without undercuts was selected in this in vitro study. The alginate impression was made of this model ten times and was poured with a type IV gypsum product, and the casts of control groups were prepared. Then 10 definitive bases were created for each cast. For the experimental groups, one relief wax layer with a thickness of 2mm was put in post-dam area for relining processes. Then, 20 alginate impressions were made of this model. On definitive base, clear heat-cured acrylic bases were fabricated. In experimental groups, bases were divided into 2 groups of 10: first group was relined with heat-cured acrylic resin and another one was relined with cold cured acrylic resin. All of the bases were put in distilled water for two weeks and then each of them was placed on the definitive base. One code was considered for each model. The gap in posterior area between acrylic bases and arch was measured in five points (a-b-c-d-e: mid line, two points in hamular notch, and two points between midline and hamular notch by two practicers in two different times (during two weeks with light B×60 microscope. The data were analyzed by Tukey and Kruskal Wallis tests.Results: The results of this study indicated that there was a statistically significant difference in the amount of gap at point A between control (bases without reline and experimental groups (P=0.047. At point D there was no significant difference between experimental groups, but a significant difference was detected between control group and bases relined with cold cure acryl (P<0.05.Conclusion: The results of this laboratory study

Avaliação cefalométrica das alterações verticais e anteroposteriores associadas ao uso do expansor maxilar com cobertura oclusal Cephalometric evaluation of vertical and anteroposterior changes associated with the use of bonded rapid maxillary expansion appliance

Directory of Open Access Journals (Sweden)

Moara De Rossi

2010-06-01

Full Text Available INTRODUÇÃO: os aparelhos expansores maxilares com cobertura oclusal têm sido sugeridos para controlar o aumento na dimensão vertical da face após a expansão rápida da maxila, porém ainda não há um consenso na literatura sobre seus reais efeitos. OBJETIVO: o objetivo deste trabalho foi avaliar as alterações cefalométricas verticais e anteroposteriores associadas à expansão da maxila realizada com o aparelho expansor com cobertura oclusal. MÉTODOS: a amostra foi composta por 25 crianças, de ambos os gêneros, com idades entre 6 e 10 anos, portadoras de mordida cruzada posterior esquelética. Após a expansão maxilar, o próprio aparelho expansor foi utilizado como contenção fixa. Foram analisadas telerradiografias em norma lateral tomadas antes do início do tratamento e após a remoção do aparelho expansor. CONCLUSÃO: com base nos resultados, pôde-se concluir que o uso do aparelho expansor com cobertura oclusal não alterou significativamente as medidas cefalométricas verticais e anteroposteriores das crianças.INTRODUCTION: Bonded rapid maxillary expansion appliances have been suggested to control increases in the vertical dimension of the face after rapid maxillary expansion but there is still no consensus in the literature concerning its actual effectiveness. OBJECTIVE: The purpose of this study was to evaluate the vertical and anteroposterior cephalometric changes associated with maxillary expansion performed using bonded rapid maxillary expansion appliances. METHODS: The sample consisted of 25 children of both genders, aged between 6 and 10 years old, with skeletal posterior crossbite. After maxillary expansion, the expansion appliance itself was used for fixed retention. Were analyzed lateral teleradiographs taken prior to treatment onset and after removal of the expansion appliance. CONCLUSION: Based on the results, it can be concluded that the use of bonded rapid maxillary expansion appliance did not significantly

Evaluation of the Transverse Craniofacial Morphology of Adolescents With Repaired Unilateral Cleft Lip and Palate Using Cone-Beam Computed Tomography.

Science.gov (United States)

Buyuk, Suleyman Kutalmiş; Celikoglu, Mevlut; Benkli, Yasin Atakan; Sekerci, Ahmet Ercan

2016-10-01

The aim of the study was to evaluate the transverse craniofacial morphology of the adolescent patients affected by unilateral cleft lip and palate (UCLP) and to compare the findings with age- and sex-matched control group without any cleft using their cone-beam computed tomography (CBCT) images. The study sample (n = 56 patients; mean age: 14.35 ± 3.06 years) consisted of 26 UCLP (n = 26 patients; 10 women and 16 men; mean age: 13.70 ± 2.94 years) and 30 control (n = 30 patients; 19 women and 11 men; mean age: 14.90 ± 3.10 years) subjects. Twenty-five conventional skeletal and dental tissue landmarks were identified. Twenty widely used frontal cephalometric variables (14 linear distances, 3 angles, and 3 ratios) were measured. The data were analyzed using the independent t-test between the groups. Patients affected by UCLP had statistically significantly smaller interorbital width (89.83 ± 4.16 mm), maxillary width (58.02 ± 5.77 mm), maxillary intermolar width (52.83 ± 4.83 mm), and upper face height (57.64 ± 4.57 mm) (P cleft width had significant effect on Cr-ANS (r = 0.446, P = 0.022) and the ANS-isf (r = 0.459, P = 0.018) measurements. The UCLP group showed statistically significantly smaller values for interorbital width, maxillary width, maxillary intermolar width, and upper face height than the noncleft controls.

Perceptual Speech Assessment After Anterior Maxillary Distraction in Patients With Cleft Maxillary Hypoplasia.

Science.gov (United States)

Richardson, Sunil; Seelan, Nikkie S; Selvaraj, Dhivakar; Khandeparker, Rakshit V; Gnanamony, Sangeetha

2016-06-01

To assess speech outcomes after anterior maxillary distraction (AMD) in patients with cleft-related maxillary hypoplasia. Fifty-eight patients at least 10 years old with cleft-related maxillary hypoplasia were included in this study irrespective of gender, type of cleft lip and palate, and amount of required advancement. AMD was carried out in all patients using a tooth-borne palatal distractor by a single oral and maxillofacial surgeon. Perceptual speech assessment was performed by 2 speech language pathologists preoperatively, before placement of the distractor device, and 6 months postoperatively using the scoring system of Perkins et al (Plast Reconstr Surg 116:72, 2005); the system evaluates velopharyngeal insufficiency (VPI), resonance, nasal air emission, articulation errors, and intelligibility. The data obtained were tabulated and subjected to statistical analysis using Wilcoxon signed rank test. A P value less than .05 was considered significant. Eight patients were lost to follow-up. At 6-month follow-up, improvements of 62% (n = 31), 64% (n = 32), 50% (n = 25), 68% (n = 34), and 70% (n = 35) in VPI, resonance, nasal air emission, articulation, and intelligibility, respectively, were observed, with worsening of all parameters in 1 patient (2%). The results for all tested parameters were highly significant (P ≤ .001). AMD offers a substantial improvement in speech for all 5 parameters of perceptual speech assessment. Copyright © 2016 The American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Maxillary distraction osteogenesis in cleft lip and palate patients with skeletal anchorage.

Science.gov (United States)

Minami, Katsuhiro; Mori, Yoshihide; Tae-Geon, Kwon; Shimizu, Hidetaka; Ohtani, Miyuki; Yura, Yoshiaki

2007-03-01

Maxillary distraction osteogenesis with the rigid external distraction (RED) system has been used to treat cleft lip and palate (CLP) patients with severe maxillary hypoplasia. We introduce maxillary distraction osteogenesis for CLP patients with skeletal anchorage adapted on a stereolithographic model. Six maxillary deficiency CLP patients treated according to our CLP treatment protocol had undergone maxillary distraction osteogenesis. In all patients, computed tomography (CT) images were recorded preoperatively, and the data were transferred to a workstation. Three-dimensional skeletal structures were reconstructed with CT data sets, and a stereolithographic model was produced. On the stereolithographic model, miniplates were adapted to the surface of maxilla beside aperture piriforms. The operation performed involved a high Le Fort I osteotomy with pterygomaxillary disjunction. Miniplates were fixed to the maxillary segment with three or four screws and used for anchorage of the RED system. Retraction of the maxillary segment was initiated after 1 week. The accuracy of the stereolithographic models was enough to adapt the miniplates so that there was no need to readjust the plates during surgery. Postoperative cephalometric analysis showed that the direction of the retraction was almost parallel to the palatal plane, and dental compensation did not occur. We performed maxillary distraction osteogenesis with skeletal anchorage adapted on the stereolithographic models. Excellent esthetic outcome and skeletal advancement were achieved without dentoalveolar compensations.

Transpalatal distraction for the management of maxillary constriction in pediatric patients

OpenAIRE

Adolphs, Nicolai; Ernst, Nicole; Hoffmeister, Bodo; Raguse, Jan-Dirk

2015-01-01

Context: The management of severe maxillary constriction can be challenging. For that purpose surgically assisted maxillary expansion by transpalatal distraction (TPD) can typically be recommended after skeletal maturity. However in selected cases bone borne transpalatal distraction devices can contribute to improve maxillary constriction considerably earlier already during mixed dentition. Aims: To assess the possibility of bone borne transpalatal distraction in pediatric patients. Settings ...

Tissue tolerance under the combination treatment of maxillary cancer

Energy Technology Data Exchange (ETDEWEB)

Egawa, J [Teikyo Univ., Tokyo (Japan). Faculty of Medicine; Ono, I; Suzuki, K; Takeda, C; Ebihara, S

1977-06-01

The tissue tolerance doses of the maxillary sinus structures were estimated when they were subjected to treatment for maxillary cancer by the usual combination of surgery, radiotherapy, and regional arterial infusion of 5-fluorouracil. Equivalent single dose calculation was applied with irreversible tissue damage as an indicator. The retardation of epithelialization of the maxillary sinus operated upon appeared to be correlated with the dose delivered. The study indicated that 2,200 rad expressed by equivalent single dose is a safe dose level for sufficient epithelialization. The safety dose level for the bony structure, exposed by surgery, seemed to be at 1,800 rad.

Endoscopic anatomy of the orbital floor and maxillary sinus.

Science.gov (United States)

Moore, Corey C; Bromwich, Matthew; Roth, Kathy; Matic, Damir B

2008-01-01

Endoscopic repair of orbital blow-out fractures could become a predictable and efficient treatment alternative to traditional methods. However, maxillary sinus endoscopy provides a complex and disorienting view of the orbital floor. To be a useful and consistent technique for providing access to the orbital floor, specific knowledge of maxillary endoscopic anatomy is required. The purpose of the study was to provide an anatomic description of the orbital floor via the endoscopic approach. Objectives include defining consistent landmarks for use in endoscopic repair of orbital floor fractures. Using 0- and 30-degree rigid endoscopes, 6 fresh cadavers (12 maxillary sinuses) were examined via a standard Caldwell-Luc approach. Computed tomographic scans, plastic molds, and digital images were used to compare observable averages within bony anatomy. Potential bony landmarks were correlated with soft-tissue anatomy in fresh specimens. The maxillary ostium, orbital floor, and lateral ethmoid air cells were visualized, and their structures were described. Observations were made in relation to the anatomy of the orbital floor and maxillary sinus, including fracture pattern and force transmission pathways. An "orbitomaxillary" sinus bony thickening was identified and described for the first time. This study provides the basis for further refinement of surgical technique and opens the door for future clinical trials using endoscopic repair.

Predisposing factors in posterior circulation infarcts: a vascular morphological assessment

Energy Technology Data Exchange (ETDEWEB)

Coban, Goekcen; Cifci, Egemen; Yildirim, Erkan; Agildere, Ahmet Muhtesem [Baskent University Faculty of Medicine, Department of Radiology, Konya (Turkey)

2015-05-01

The aim of the study is to assess the effect of shape, diameter, elongation and deviation criteria of basilar artery (BA), convergence angle and diameter variations of vertebral arteries, and concurrent chronic diseases on posterior circulation infarcts. Between January 2010 and May 2013, 186 patients who underwent brain and diffusion magnetic resonance imaging (MRI) with suspected cerebrovascular accident and were diagnosed with posterior circulation infarct and 120 infarct negative control subjects were included in this case-control retrospective study. Vertebral artery (VA) and BA diameter, right (R) and left (L) VA angles at the level of bifurcation, and BA elongation-deviation, and shape of BA were assessed in a total of 306 subjects. Ischemic lesions in the posterior circulation were classified according to their anatomical location and vascular perfusion areas. No significant difference was noted between the control and patient groups with respect to BA diameter (p = 0.676). The most effective risk factors for posterior circulation infarcts were as follows: BA elongation of 2 or 3, BA transverse location of 2 or 3, increase in left VA angle, and history of hypertension, hypercholesterolemia, and diabetes mellitus. Our results suggest that prominent elongation and deviation, C and J shape of BA, and increased L VA angle may be the predictors of at-risk patients in posterior circulation infarcts. Reporting marked morphological BA and VA variations detected at routine brain MRI will aid in selection of patients. Timely detection and treatment of at-risk patients may be life-saving. (orig.)

Predisposing factors in posterior circulation infarcts: a vascular morphological assessment

International Nuclear Information System (INIS)

Coban, Goekcen; Cifci, Egemen; Yildirim, Erkan; Agildere, Ahmet Muhtesem

2015-01-01

The aim of the study is to assess the effect of shape, diameter, elongation and deviation criteria of basilar artery (BA), convergence angle and diameter variations of vertebral arteries, and concurrent chronic diseases on posterior circulation infarcts. Between January 2010 and May 2013, 186 patients who underwent brain and diffusion magnetic resonance imaging (MRI) with suspected cerebrovascular accident and were diagnosed with posterior circulation infarct and 120 infarct negative control subjects were included in this case-control retrospective study. Vertebral artery (VA) and BA diameter, right (R) and left (L) VA angles at the level of bifurcation, and BA elongation-deviation, and shape of BA were assessed in a total of 306 subjects. Ischemic lesions in the posterior circulation were classified according to their anatomical location and vascular perfusion areas. No significant difference was noted between the control and patient groups with respect to BA diameter (p = 0.676). The most effective risk factors for posterior circulation infarcts were as follows: BA elongation of 2 or 3, BA transverse location of 2 or 3, increase in left VA angle, and history of hypertension, hypercholesterolemia, and diabetes mellitus. Our results suggest that prominent elongation and deviation, C and J shape of BA, and increased L VA angle may be the predictors of at-risk patients in posterior circulation infarcts. Reporting marked morphological BA and VA variations detected at routine brain MRI will aid in selection of patients. Timely detection and treatment of at-risk patients may be life-saving. (orig.)

Predisposing factors in posterior circulation infarcts: a vascular morphological assessment.

Science.gov (United States)

Çoban, Gökçen; Çifçi, Egemen; Yildirim, Erkan; Ağıldere, Ahmet Muhteşem

2015-05-01

The aim of the study is to assess the effect of shape, diameter, elongation and deviation criteria of basilar artery (BA), convergence angle and diameter variations of vertebral arteries, and concurrent chronic diseases on posterior circulation infarcts. Between January 2010 and May 2013, 186 patients who underwent brain and diffusion magnetic resonance imaging (MRI) with suspected cerebrovascular accident and were diagnosed with posterior circulation infarct and 120 infarct negative control subjects were included in this case-control retrospective study. Vertebral artery (VA) and BA diameter, right (R) and left (L) VA angles at the level of bifurcation, and BA elongation-deviation, and shape of BA were assessed in a total of 306 subjects. Ischemic lesions in the posterior circulation were classified according to their anatomical location and vascular perfusion areas. No significant difference was noted between the control and patient groups with respect to BA diameter (p = 0.676). The most effective risk factors for posterior circulation infarcts were as follows: BA elongation of 2 or 3, BA transverse location of 2 or 3, increase in left VA angle, and history of hypertension, hypercholesterolemia, and diabetes mellitus. Our results suggest that prominent elongation and deviation, C and J shape of BA, and increased L VA angle may be the predictors of at-risk patients in posterior circulation infarcts. Reporting marked morphological BA and VA variations detected at routine brain MRI will aid in selection of patients. Timely detection and treatment of at-risk patients may be life-saving.

Bruxism in children and transverse plane of occlusion: is there a relationship or not?

Science.gov (United States)

Nahás-Scocate, Ana Carla Raphaelli; Coelho, Fernando Vusberg; de Almeida, Viviane Chaves

2014-01-01

To assess the occurrence of bruxism in deciduous dentition and a potential association between the habit and the presence or absence of posterior crossbite. A total of 940 patient files were assessed. They were gathered from the archives of University of São Paulo City--UNICID; however, 67 patient files were dismissed for not meeting the inclusion criteria. Therefore, 873 children, males and females, comprised the study sample. They were aged between 2-6 years old and came from six different public primary schools from the east of the city of São Paulo. Data were collected through questionnaires answered by parents/guardians and by clinical examinations carried out in the school environment in order to obtain the occlusal characteristics in the transverse direction. First, a descriptive statistical analysis of all variables was performed (age, sex, race, posterior crossbite, bruxism, headache and restless sleep); then, the samples were tested by means of chi-square test with significance level set at 0.05%. A logistic regression model was applied to identify the presence of bruxism. The prevalence of this parafunctional habit was of 28.8%, with 84.5% of patients showing no posterior crossbite. Regarding the association of bruxism with crossbite, significant results were not found. Children with restless sleep have 2.1 times more chances of developing bruxism, whereas children with headache have 1.5 more chances. Transverse plane of occlusion was not associated with the habit of bruxism.

Bruxism in children and transverse plane of occlusion: Is there a relationship or not?

Directory of Open Access Journals (Sweden)

Ana Carla Raphaelli Nahás-Scocate

2014-10-01

Full Text Available OBJECTIVE: To assess the occurrence of bruxism in deciduous dentition and a potential association between the habit and the presence or absence of posterior crossbite. METHODS: A total of 940 patient files were assessed. They were gathered from the archives of University of São Paulo City - UNICID; however, 67 patient files were dismissed for not meeting the inclusion criteria. Therefore, 873 children, males and females, comprised the study sample. They were aged between 2-6 years old and came from six different public primary schools from the east of the city of São Paulo. Data were collected through questionnaires answered by parents/guardians and by clinical examinations carried out in the school environment in order to obtain the occlusal characteristics in the transverse direction. First, a descriptive statistical analysis of all variables was performed (age, sex, race, posterior crossbite, bruxism, headache and restless sleep; then, the samples were tested by means of chi-square test with significance level set at 0.05%. A logistic regression model was applied to identify the presence of bruxism. RESULTS: The prevalence of this parafunctional habit was of 28.8%, with 84.5% of patients showing no posterior crossbite. Regarding the association of bruxism with crossbite, significant results were not found. Children with restless sleep have 2.1 times more chances of developing bruxism, whereas children with headache have 1.5 more chances. CONCLUSION: Transverse plane of occlusion was not associated with the habit of bruxism.

Unusual anatomy of maxillary central incisor with two roots

Directory of Open Access Journals (Sweden)

T S Ashwini Shivakumar

2012-01-01

Full Text Available Introduction: Knowledge of root canal morphology is essential for successful endodontic therapy. Failure to recognize unusual root canal anatomy may lead to unsuccessful endodontic treatment. Case Report: This case report describes the successful endodontic treatment of the maxillary central incisor with unusual anatomy of two roots and two root canals. A 23-year-old male patient was referred for dental consultation with discoloration of the maxillary right central incisor with periapical lesion, which revealed unusual anatomy of root on radiographic examination, and was confirmed upon exploration. Discussion: As described by Vertucci, the maxillary central incisor presents a single root and single root canal in 100% of the cases. However, few cases of maxillary central incisors with two canals were reported in the literature, most of which were associated with developmental anomalies like fusion, germination or dens invaginatus. Clinician should be aware of the unusual anatomical variations that should be detected by the different diagnostic resources available.

Long-term results of surgically-assisted maxillary protraction.

Science.gov (United States)

Nevzatoğlu, Sirin; Küçükkeleş, Nazan

2014-05-01

The long-term treatment results of surgically-assisted facemask therapy were assessed by a comparison of the immediate protraction effects with those seen at five years review. Nine patients treated with a corticotomy-assisted maxillary protraction protocol were recalled five years following protraction. Cephalometric films taken before treatment (T0), immediately after maxillary protraction (T1) and five years after treatment (T2) were compared. The short-term results of surgically-assisted facemask therapy showed significant skeletal and soft tissue changes. After five years, the profile and dental relationships were well maintained and a cephalometric analysis revealed a stable vertical increase but only partially maintained soft tissue changes with loss of sagittal advancement. There was significant upper incisor proclination providing dental camouflage. Patients who are treated with corticotomy-assisted maxillary advancement should be very carefully selected. Assessment criteria include a low mandibular plane angle Class III patients who have severe maxillary retrognathism unable to be treated by conventional orthopaedic correction alone; patients who have almost completed growth and missed the chance of earlier orthopaedic correction, as well as patients who are not willing to accept bimaxillary orthognathic surgery, may be successfully treated.

Prevalence of bony septa, antral pathology, and dimensions of the maxillary sinus from a sinus augmentation perspective: A retrospective cone-beam computed tomography study

Energy Technology Data Exchange (ETDEWEB)

Tadinada, Aditya; Jalali, Elnaz; Al Salman, Wesam; Jambhekar, Shantanu; Katechia, Bina [University of Connecticut, School of Dental Medicine, Farmington (United States); Almas, Khalid [Div. of Periodontology, University of Dammam, College of Dentistry, Dammam (Saudi Arabia)

2016-06-15

Sinus elevation procedures have become a routine and reliable way to gain bone volume in the edentulous maxilla for dental implant placement. Presence of bony septations and pathology in the maxillary sinus often cause complications leading to graft or implant failure or both. The aim of this study was to retrospectively evaluate the prevalence of pathology, direction of the septa, and sinus width measured at 2 mm, 5 mm, and 10 mm from the sinus floor in maxillary sinuses using cone-beam computed tomography (CBCT). Seventy-two sinuses from 36 random preoperative CBCT scans referred for implant therapy were retrospectively evaluated for the number, prevalence, and direction of bony septations and presence of pathology. Width of the sinus was also measured at 2 mm, 5 mm, and 10 mm from the sinus floor to account for the amount of bone available for implant placement. Maxillary sinus septa were found in 59.7%. Presence of a single septum was noted in 20 sinuses (27.7%), followed by two septa in 17 sinuses. The most common direction of the septum was the transverse direction. Retention pseudocyst and mucosal thickening were the most commonly seen abnormality/pathology. Based on the high prevalence of septa and sinus pathology in this sample, a preoperative CBCT scan might be helpful in minimizing complications during sinus augmentation procedures for dental implant therapy.

Prevalence of bony septa, antral pathology, and dimensions of the maxillary sinus from a sinus augmentation perspective: A retrospective cone-beam computed tomography study

International Nuclear Information System (INIS)

Tadinada, Aditya; Jalali, Elnaz; Al Salman, Wesam; Jambhekar, Shantanu; Katechia, Bina; Almas, Khalid

2016-01-01

Sinus elevation procedures have become a routine and reliable way to gain bone volume in the edentulous maxilla for dental implant placement. Presence of bony septations and pathology in the maxillary sinus often cause complications leading to graft or implant failure or both. The aim of this study was to retrospectively evaluate the prevalence of pathology, direction of the septa, and sinus width measured at 2 mm, 5 mm, and 10 mm from the sinus floor in maxillary sinuses using cone-beam computed tomography (CBCT). Seventy-two sinuses from 36 random preoperative CBCT scans referred for implant therapy were retrospectively evaluated for the number, prevalence, and direction of bony septations and presence of pathology. Width of the sinus was also measured at 2 mm, 5 mm, and 10 mm from the sinus floor to account for the amount of bone available for implant placement. Maxillary sinus septa were found in 59.7%. Presence of a single septum was noted in 20 sinuses (27.7%), followed by two septa in 17 sinuses. The most common direction of the septum was the transverse direction. Retention pseudocyst and mucosal thickening were the most commonly seen abnormality/pathology. Based on the high prevalence of septa and sinus pathology in this sample, a preoperative CBCT scan might be helpful in minimizing complications during sinus augmentation procedures for dental implant therapy

Maxillary obturator

Directory of Open Access Journals (Sweden)

Aruna Jawahirlal Bhandari

2017-01-01

Full Text Available Defects in the maxillary jaw can be congenital, developmental, acquired, traumatic or surgical involving the oral cavity and related anatomic structure. Absence or loss of some or all of the soft palate and / or hard palate results in insufficient structure or altered function of the remaining tissues. Defects can cause disruption of articulation and airflow during speech production and also nasal reflux during deglutition. Patients after surgical resection have altered anatomy due to scaring, tissue contracture, lack of bony support and tissue edema. These patients have problem of regurgitation of water and food through nose and difficulty in speech. These changes require the fabrication of prosthesis and also sometimes repeated prosthesis adjustments to confirm to the soft tissue changes. To prevent this and to help the patient in deglutition and speech defects must be restored with prosthesis. In such situation an obturator is designed to close the opening between the residual hard and / or soft palate and the pharynx. The prosthesis provided for these patients are called as obturators. An obturator is a prosthesis which is fabricated for the patients with the palatal defects in the form of cleft lip and palate, oroantral fistula or surgical resection after removable of pathology like tumor or cancer. This review article will highlight on the Prosthetic Rehabilitation of the maxillary defects and the types of obturators.

EPITHELIAL MYOEPITHELIAL CARCINOMA OF MAXILLARY SINUS —A DIAGNOSTIC DILEMMA

OpenAIRE

Rajeev Sen; Sumiti Gupta; Kanika Taneja; Nisha Marwah; Sonia Chhabra; Sonia Hasija

2015-01-01

Epithelial – Myoepithelial Carcinoma (EMC) is a rare malignant salivary gland neoplasm that most commonly occurs in the Parotid gland, but can also arise in the Minor Salivary Glands. EMC of the maxillary sinus extremely rare. We describe here a case of a 74-year-old patient who presented with maxillary swelling for 4months and nasal discharge for 3 months. Computed Tomography Scan revealed an expansile soft tissue mass in the left maxillary sinus eroding all its walls. In View of high sus...

Combination of straight and tilted implants for supporting screw-retained dental prostheses in atrophic posterior maxillae: A 2-year prospective study.

Science.gov (United States)

Casar-Espinosa, Juan-Carlos; Castillo-Oyagüe, Raquel; Serrera-Figallo, María Ángeles; Garrido-Serrano, Roberto; Lynch, Christopher D; Menéndez-Collar, Manuel; Torres-Lagares, Daniel; Gutiérrez-Pérez, José-Luis

2017-08-01

To evaluate the two-year survival rate (SR) and marginal bone loss (MBL) of fixed dental prostheses (FDPs) supported by straight (S) and tilted (T) implants under the influence of diverse study variables. A prospective investigation comprising 21 patients provided with a total of 27 maxillary screw-retained restorations fixed to 70 dental implants was developed. Two groups of implants were considered depending on their inclination with respect to the occlusal plane: Group 1 (S, n=37): straight/axial implants and Group 2 (T, n=33): tilted/angled fixations. Each FDP was supported by a combination of S and T implants. SR and MBL were assessed at the time of loading and two years after surgery. Patient-, surgical- and/or rehabilitation-related information was gathered. Data were statistically analysed at the α=0.05 significance level. After 24 months, a 100% SR was achieved and the MBL of S and T implants were statistically similar. T implants located in the molar region showed lower MBL than did those replacing premolars (p=0.031). Upright and angled fixations inserted at posterior maxillary areas resulted in comparable survival rates and peri-implant MBL after two years. The marginal bone resorption around tilted implants depended on their location. Screw-retained restorations fixed to straight and tilted implants seem to be a safe treatment option in posterior atrophic maxillae. Copyright © 2017 Elsevier Ltd. All rights reserved.

Modified custom made J-hook for maxillary protraction in a rapid maxillary expansion appliance

Directory of Open Access Journals (Sweden)

Jithesh Kumar Kodoth

2014-01-01

Full Text Available A simple yet innovative attaching the J-hook along with an rapid maxillary appliance for the protraction of maxilla is presented. The proposed method not only simplifies construction but also is equally effective.

Tissue tolerance under the combination treatment of maxillary cancer

International Nuclear Information System (INIS)

Egawa, Jun; Ono, Isamu; Suzuki, Kunio; Takeda, Chisato; Ebihara, Satoshi.

1977-01-01

The tissue tolerance doses of the maxillary sinus structures were estimated when they were subjected to treatment for maxillary cancer by the usual combination of surgery, radiotherapy and regional arterial infusion of 5-fluorouracil. Equivalent single dose calculation was applied with irreversible tissue damage as an indicator. The retardation of epithelialization of the maxillary sinus operated upon appeared to be correlated with the dose delivered. The study indicated that 2,200 rad expressed by equivalent single dose is a safe dose level for sufficient epithelialization. The safety dose level for the bony structure, exposed by surgery, seemed to be at 1,800 rad. (auth.)

“Maxillary lateral incisor partial anodontia sequence”: a clinical entity with epigenetic origin

Science.gov (United States)

Consolaro, Alberto; Cardoso, Maurício Almeida; Consolaro, Renata Bianco

2017-01-01

ABSTRACT The relationship between maxillary lateral incisor anodontia and the palatal displacement of unerupted maxillary canines cannot be considered as a multiple tooth abnormality with defined genetic etiology in order to be regarded as a “syndrome”. Neither were the involved genes identified and located in the human genome, nor was it presumed on which chromosome the responsible gene would be located. The palatal maxillary canine displacement in cases of partial anodontia of the maxillary lateral incisor is potentially associated with environmental changes caused by its absence in its place of formation and eruption, which would characterize an epigenetic etiology. The lack of the maxillary lateral incisor in the canine region means removing one of the reference guides for the eruptive trajectory of the maxillary canine, which would therefore, not erupt and /or impact on the palate. Consequently, and in sequence, it would lead to malocclusion, maxillary atresia, transposition, prolonged retention of the deciduous canine and resorption in the neighboring teeth. Thus, we can say that we are dealing with a set of anomalies and multiple sequential changes known as sequential development anomalies or, simply, sequence. Once the epigenetics and sequential condition is accepted for this clinical picture, it could be called “Maxillary Lateral Incisor Partial Anodontia Sequence.” PMID:29364376

“Maxillary lateral incisor partial anodontia sequence”: a clinical entity with epigenetic origin

Directory of Open Access Journals (Sweden)

Alberto Consolaro

Full Text Available ABSTRACT The relationship between maxillary lateral incisor anodontia and the palatal displacement of unerupted maxillary canines cannot be considered as a multiple tooth abnormality with defined genetic etiology in order to be regarded as a “syndrome”. Neither were the involved genes identified and located in the human genome, nor was it presumed on which chromosome the responsible gene would be located. The palatal maxillary canine displacement in cases of partial anodontia of the maxillary lateral incisor is potentially associated with environmental changes caused by its absence in its place of formation and eruption, which would characterize an epigenetic etiology. The lack of the maxillary lateral incisor in the canine region means removing one of the reference guides for the eruptive trajectory of the maxillary canine, which would therefore, not erupt and /or impact on the palate. Consequently, and in sequence, it would lead to malocclusion, maxillary atresia, transposition, prolonged retention of the deciduous canine and resorption in the neighboring teeth. Thus, we can say that we are dealing with a set of anomalies and multiple sequential changes known as sequential development anomalies or, simply, sequence. Once the epigenetics and sequential condition is accepted for this clinical picture, it could be called “Maxillary Lateral Incisor Partial Anodontia Sequence.”

Effect of maxillary distraction osteogenesis on velopharyngeal function: a pilot study.

Science.gov (United States)

Harada, Kiyoshi; Ishii, Yoshimasa; Ishii, Masatoshi; Imaizumi, Humiko; Mibu, Michiko; Omura, Ken

2002-05-01

The purpose of this study was to examine preoperative and postoperative changes of velopharyngeal function in cleft patients who underwent maxillary distraction osteogenesis using the Rigid External Distraction System. Six cleft patients followed for a minimum of 12 months after maxillary distraction were examined. Plain and contrast lateral-cephalograms were obtained preoperatively and postoperatively, and speech evaluation was performed by the same authorized speech therapist at the same time points. The mean distraction amount at the anterior nasal spine was 11.7 mm (range, 7.4 mm - 15.0 mm). Both the nasopharyngeal depth and velar length increased after maxillary distraction, but the need ratio (nasopharyngeal depth/velar length) also increased after distraction. Although scores for velopharyngeal closure dropped a few points after maxillary distraction, the rating for hypernasality remained unchanged in all patients but the patient whose distraction amount was 15.0 mm. These results suggest that maxillary distraction of less than 15 mm may not markedly affect velopharyngeal function in cleft patients.

Quantitation of maxillary remodeling. 1. A description of osseous changes relative to superimposition on metallic implants.

Science.gov (United States)

Baumrind, S; Korn, E L; Ben-Bassat, Y; West, E E

1987-01-01

Lateral skull radiographs for a set of 31 human subjects were examined using computer-aided methods in an attempt to quantify modal trends of maxillary remodeling during the mixed dentition and adolescent growth periods. Cumulative changes in position of anterior nasal spine (ANS), posterior nasal spine (PNS), and Point A are reported at annual intervals relative to superimposition on previously placed maxillary metallic implants. This in vivo longitudinal study confirms at a high level of confidence earlier findings by Enlow, Björk, Melsen, and others to the effect that the superior surface of the maxilla remodels downward during the period of growth and development being investigated. However, the inter-individual variability is relatively large, the mean magnitudes of change are relatively small, and the rate of change appears to diminish by 13.5 years. For the 19 subjects for whom data were available for the time interval from 8.5 to 15.5 years, mean downward remodeling at PNS was 2.50 mm with a standard deviation of 2.23 mm. At ANS, corresponding mean value was 1.56 mm with a standard deviation of 2.92 mm. Mean rotation of the ANS-PNS line relative to the implant line was 1.1 degree in the "forward" direction. However, this rotational change was particularly variable with a standard deviation of 4.6 degrees and a range of 11.3 degrees "forward" to 6.7 degrees "backward." The study provides strong evidence that the palate elongates anteroposteriorly mainly by the backward remodeling of structures located posterior to the region in which the implants were placed. There is also evidence that supports the idea of modal resorptive remodeling at ANS and PNS, but here the data are somewhat more equivocal. It appears likely, but not certain, that there are real differences in the modal patterns of remodeling between treated and untreated subjects. Because of problems associated with overfragmentation of the sample, sex differences were not investigated.

A case of unusual root morphology: Maxillary canine with two roots

Directory of Open Access Journals (Sweden)

Nagesh Bolla

2009-01-01

Full Text Available The case describes a 3 months follow-up of the treatment of a maxillary canine with two roots. Clinical examination revealed a maxillary canine with a large carious lesion and an exaggerated response to cold thermal tests. Radiographic examination revealed a large distal carious lesion that appeared to invade the pulp chamber. The radiograph also revealed what appeared to be an extra root in this permanent maxillary canine.

The Efficacy of Buccal Infiltration of 4% Articaine and PSA Injection of 2% Lidocaine on Anesthesia of Maxillary Second Molars.

Science.gov (United States)

Maljaei, Ensiyeh; Pourkazemi, Maryam; Ghanizadeh, Milad; Ranjbar, Rana

2017-01-01

During the early mixed dentition period, the location of the deciduous maxillary second molar results in ineffectiveness of the infiltration technique in this area. In such cases, administration of posterior superior alveolar (PSA) nerve block is recommended; however, such a technique has some complications. The present study was undertaken to compare the effects of buccal infiltration of 4% Articaine and PSA technique with 2% Lidocaine on the success of anesthesia of maxillary deciduous second molars in 6 to 9-year old children. In the present double-blind randomized clinical trial, 56 children aged 6-9 years requiring vital pulp therapy of deciduous maxillary second molar were included. In group 1, 4% Articaine was injected using a buccal infiltration technique. In group 2, 2% Lidocaine was injected using the PSA nerve block technique. After 10 min, the caries was removed and access cavity preparation was instituted. The patients were asked to report the presence or absence of pain during the procedure. Therefore, the existence of pain was measured by the patient's self-report. Data were analyzed with descriptive statistical methods and the chi -squared test. Pain was reported by 6 (21.4%) and 9 (32.1%) subjects in the Articaine and Lidocaine groups, respectively. Chi -squared test did not reveal any significant differences between the two groups ( P =0.54). Under the limitations of the present study, there was no significant differences between the results of Articaine buccal infiltration and Lidocaine PSA technique, so Articaine buccal infiltration can be used as a substitute for the PSA technique.

Orthodontic management of bilateral maxillary canine-first premolar transposition and bilateral agenesis of maxillary lateral incisors: a case report.

Science.gov (United States)

Di Palma, Elena; Di Giuseppe, Biagio; Tepedino, Michele; Chimenti, Claudio

2015-01-01

Maxillary canine-first premolar transposition (Mx.C.P1) is an uncommon dental positional anomaly that may create many orthodontic problems from both esthetic and functional points of view. In this report we show the orthodontic management of a case of Mx.C.P1 associated with bilateral maxillary lateral incisor agenesis and unilateral mandibular second premolar agenesis The patient was treated with a multibracket appliance and the extraction of the lower premolar. treatment was completed without the need for any prosthetic replacement.

Transnasal endoscopic medial maxillectomy in recurrent maxillary sinus inverted papilloma.

Science.gov (United States)

Kamel, Reda H; Abdel Fattah, Ahmed F; Awad, Ayman G

2014-12-01

Maxillary sinus inverted papilloma entails medial maxillectomy and is associated with high incidence of recurrence. To study the impact of prior surgery on recurrence rate after transnasal endoscopic medial maxillectomy. Eighteen patients with primary and 33 with recurrent maxillary sinus inverted papilloma underwent transnasal endoscopic medial maxillectomy. Caldwell-Luc operation was the primary surgery in 12 patients, transnasal endoscopic resection in 20, and midfacial degloving technique in one. The follow-up period ranged between 2 to 19.5 years with an average of 8.8 years. Recurrence was detected in 8/51 maxillary sinus inverted papilloma patients (15.7 %), 1/18 of primary cases (5.5 %), 7/33 of recurrent cases (21.2 %); 3/20 of the transnasal endoscopic resection group (15%) and 4/12 of the Caldwell-Luc group (33.3%). Redo transnasal endoscopic medial maxillectomy was followed by a single recurrence in the Caldwell-Luc group (25%), and no recurrence in the other groups. Recurrence is more common in recurrent maxillary sinus inverted papilloma than primary lesions. Recurrent maxillary sinus inverted papilloma after Caldwell-Luc operation has higher incidence of recurrence than after transnasal endoscopic resection.

Morphologic study of the maxillary molars. Part II: Internal anatomy.

Science.gov (United States)

Pécora, J D; Woelfel, J B; Sousa Neto, M D; Issa, E P

1992-01-01

The internal anatomy of three hundred and seventy (370) decalcified and cleared human maxillary molars was studied. Seventy-five percent of the first molars, 58% of the second molars and 68% of the third molars studied presented three (3) root canals and 25% of the first molars, 42% of the second molars and 32% of the third molars presented four (4) root canals. The authors observed that the incidence of two root canals in the mesiobuccal root was higher in second maxillary molars than in first maxillary molars.

Rare occurrence of the left maxillary horizontal third molar impaction ...

African Journals Online (AJOL)

Rare occurrence of the left maxillary horizontal third molar impaction, the right maxillary third molar vertical impaction and the left mandibular third molar vertical impaction with inferior alveolar nerve proximity in a 30 year old female: a case report.

Camouflage treatment of skeletal class III malocclusion with asymmetry using a bone-borne rapid maxillary expander.

Science.gov (United States)

Seo, Yu-Jin; Chung, Kyu-Rhim; Kim, Seong-Hun; Nelson, Gerald

2015-03-01

This case report presents the successful use of palatal mini-implants for rapid maxillary expansion and mandibular distalization in a skeletal Class III malocclusion. The patient was a 13-year-old girl with the chief complaint of facial asymmetry and a protruded chin. Camouflage orthodontic treatment was chosen, acknowledging the possibility of need for orthognathic surgery after completion of her growth. A bone-borne rapid expander (BBRME) was used to correct the transverse discrepancy and was then used as indirect anchorage for distalization of the lower dentition with Class III elastics. As a result, a Class I occlusion with favorable inclination of the upper teeth was achieved without any adverse effects. The total treatment period was 25 months. Therefore, BBRME can be considered an alternative treatment in skeletal Class III malocclusion.

Trans-sinusal maxillary distraction for correction of midfacial hypoplasia: long-term clinical results.

NARCIS (Netherlands)

Nadjmi, N.; Schutyser, F.A.C.; Erum, R. van

2006-01-01

Maxillary distraction osteogenesis is indicated in severe angle class III malocclusions, and severe maxillary hypoplasia among some cleft patients and other craniofacial deformities. Twenty patients, aged 8-48 years (mean 17.8+/-10.5 SD) with maxillary and midfacial hypoplasia were treated. The

Macrodontic maxillary incisor in alagille syndrome

Directory of Open Access Journals (Sweden)

Mauro Cozzani

2012-01-01

Full Text Available This case report describes the surgical-orthodontic guided-eruption of a deeply impacted macrodontic maxillary central incisor in a 10-year-old patient with Alagille syndrome (ALGS. In the first stage, orthodontic treatment with fixed appliance on deciduous teeth allowed to create enough space for the eruption of the maxillary right central incisor. The second stage included closed surgical exposure and vertical traction. After impacted tooth erupted in the proper position, accessory periodontal treatment and dental reshaping procedures may be indicated to camouflage macrodontic incisor with the adjacent teeth. This is the first report that presents a patient with ALGS undergoing orthodontic and surgical treatment.

Prevalence of anatomical variations in maxillary sinus using cone beam computed tomography

Directory of Open Access Journals (Sweden)

Deepjyoti K Mudgade

2018-01-01

Full Text Available Introduction: The maxillary sinuses (MS are of particular importance to dentist because of their close proximity to the teeth and their associated structures, so increased risk of maxillary sinusitis has been reported with periapical abscess, periodontal diseases, dental trauma, tooth extraction, and implant placement. Complications of MS are related to its anatomic and pathologic variations. Thus, study was conducted to assess the prevalence of anatomic variations in MS by using cone-beam computerized tomography (CBCT. Aims and Objectives: To determine different anatomical variations in MS by using CBCT. Materials and Methods: CBCT scans of 150 subjects were collected between the age group of 18 years to 70 years and were analyzed for MS anatomical variation. Statistical Analysis: The distribution of age, sex, reasons for CBCT, and dimensions of sinus calculated using descriptive statistics and distribution of other anatomic findings using Chi-square test. Results: Prevalence of obstructed ostium is 23.3% and septa is 66.7%. Average height, width, and antero-posterior (A-P dimensions for right MS are 34.13 mm, 26.09 mm, 37.39 mm and that of left MS are 33.24 mm, 26.11 mm, 37.72 mm respectively. Average distance between lower border of ostium to sinus floor in right MS is 32.17 mm and that of left is 32.69 mm. Average diameter of ostium in right MS is 1.88 mm and that of left is 1.67 mm. Conclusion: Study highlights the importance of accurate assessment of MS and its variations in order to properly differentiate the pathologic lesions from anatomic variations avoiding unnecessary surgical explorations.

Ausência de fluxo aéreo nasal e desenvolvimento dos seios maxilares Absence of nasal air flow and maxillary sinus development

Directory of Open Access Journals (Sweden)

Roberto Eustáquio dos Santos Guimarães

2007-04-01

Full Text Available Os mecanismos responsáveis pelo desenvolvimento dos seios paranasais ainda são pouco conhecidos, o fluxo aéreo nasal segundo uma das teorias propostas seria fundamental ao crescimento e desenvolvimento saudável dos seios paranasais. OBJETIVO: Estudar comparativamente o desenvolvimento dos seios maxilares e a presença de sinusopatia, em um mesmo modelo, na ausência e presença de fluxo aéreo nasal posterior. MATERIAL E MÉTODOS: Estudo retrospectivo transversal de uma série de casos; os exames tomográficos pré-operatórios de 7 pacientes com atresia coanal unilateral, idade média 16.28 anos (± 5,024. Este estudo realizado em um hospital terciário, com pacientes que passaram neste serviço entre os anos de 1994 e 2004. A área dos seios maxilares foi medida com auxílio do programa Auto-Cad. Utilizou-se o teste de Kruskal-Wallis para análise estatística. RESULTADOS: Nesse estudo observou-se seios maxilares simétricos e até mesmo maiores no lado da atresia coanal em 85,71% dos casos, não houve diferença estatística significativa entre os dois lados comparados. Não se observou sinais de tomográficos de sinusopatia neste grupo de pacientes. CONCLUSÃO: Os achados aqui apresentados contrariam a teoria difusamente aceita sobre o papel do fluxo aéreo nasal na saúde e no desenvolvimento das cavidades paranasais.Paranasal sinuses development mechanisms are not well known. Nasal air flow, according to one of the proposed theories, would be fundamental to the growth and healthy development of paranasal sinuses. AIM: The aim of this study was to evaluate the maxillary sinus growth and health in the presence and absence of postnasal air flow through a unique model. MATERIALS AND METHODS: Retrospective study of a series of cases; preoperative CT scans of 7 patients with unilateral choanal atresia, average age was 16.28 years (± 5.024. This study was done in a tertiary hospital, with patients treated between 1994 and 2004. The area of

Position and Eruption of Permanent Maxillary Canines in Cases of Maxillary Lateral Incisor Agenesis in Mixed Dentition.

Science.gov (United States)

Lamas, Cátia; Lavall, Asela; Pinho, Teresa

2018-01-01

Assess whether the permanent maxillary canine (MC) has a natural tendency to erupt mesially in children with maxillary lateral incisors agenesis (MLIA), compared to children without agenesis. This retrospective, observational, cross-sectional study consisted of children between 5 and 12 years old divided into three groups: the first group with unilateral MLIA, in which an intraindividual analysis was performed, the second group presented bilateral MLIA, and the third group with patients without agenesis. These last two groups were matched for comparison interindividual, being pared by sex and maturation of the MC. The canine position in the horizontal sector showed a clear mesial positioning of the MC on the agenesis side in individuals with unilateral MLIA (group 1) when compared with the counter lateral side; and in individuals with bilateral MLIA (Group 2) compared with control Individuals without agenesis (group 3). Even with the maintenance of this deciduous tooth in the dental arch, the MC keeps its tendency to mesial eruption. There is a greater tendency for mesial angulation of the maxillary canine in patients with MLIA, regardless of the presence or absence of deciduous lateral incisor.

Long-term follow-up of early cleft maxillary distraction.

Science.gov (United States)

Park, Young-Wook; Kwon, Kwang-Jun; Kim, Min-Keun

2016-12-01

Most of cleft lip and palate patients have the esthetic and functional problems of midfacial deficiencies due to innate developmental tendency and scar tissues from repeated operations. In these cases, maxillary protraction is required for the harmonious facial esthetics and functional occlusion. A 7-year old boy had been diagnosed as severe maxillary constriction due to unilateral complete cleft lip and palate. The author tried to correct the secondary deformity by early distraction osteogenesis with the aim of avoiding marked psychological impact from peers of elementary school. From 1999 to 2006, repeated treatments, which consisted of Le Fort I osteotomy and face mask distraction, and complementary maxillary protraction using miniplates were performed including orthodontics. But, final facial profile was not satisfactory, which needs compromising surgery. The result of this study suggests that if early distraction treatment is performed before facial skeletal growth is completed, an orthognathic surgery or additional distraction may be needed later. Maxillofacial plastic and reconstructive surgeons should notify this point when they plan early distraction treatment for cleft maxillary deformity.

Extraction of Maxillary Central Incisors: An Orthodontic-Restorative Treatment

Science.gov (United States)

Hedayati, Zohreh; Zare, Maryam; Bahramnia, Fateme

2014-01-01

Malformed central incisors with poor prognosis could be candidates for extraction especially in crowded dental arches. This case report refers to a 12-year-old boy who suffered from malformed upper central incisors associated with severe attrition. Upper lateral incisors were positioned palatally and canines were rotated and positioned in the high buccal area. The patient had class II malocclusion and space deficiency in both dental arches. Due to incisal wear and malformed short maxillary central incisors and the need for root canal therapy with a major crown build-up, these teeth were extracted. The maxillary lateral incisors were substituted. Thus the maxillary canines were substituted for lateral incisors and the first premolars were substituted for canines. In the lower dental arch the first bicuspids were extracted. Composite resin build-up was performed on the maxillary lateral incisors and canines. This allowed for the crowding and the malocclusion to be corrected. Subsequent gingivectomy improved the patient's gingival margins and smile esthetics one month after orthodontic therapy. PMID:25400954

Cone Beam Computed Tomography Analysis of Incidental Maxillary Sinus Pathologies in North Indian Population

Directory of Open Access Journals (Sweden)

Sangeeta S Malik

2017-01-01

Full Text Available Introduction: Maxillary sinus can be visualized in both two-dimensional and three-dimensional images. Computed tomography (CT is considered the gold standard method for the examination of maxillary sinus. Cone beam computed tomography (CBCT addresses the limitation of CT and provides many dental advantages. It can provide valuable knowledge about the pathology with limited exposure and low cost compared with other imaging used for diagnostic purposes. Aims and Objectives: The aim of the study is to analyze the prevalence of pathological changes in maxillary sinus of asymptomatic cases using CBCT for diagnostic purposes. Materials and Methods: This retrospective study evaluated 231 patients for incidental maxillary sinus pathologies. Pathological findings were categorized as mucosal thickening, polypoid mucosal thickening, radiopacification, and no pathological findings. Evaluation of pathological findings was done using factors of age and gender. Results: The present study showed 86 cases with maxillary sinus pathology and 145 cases with no pathological findings. Patients with maxillary sinus pathology were mostly diagnosed with mucosal thickening on both sides. In right maxillary sinus, 45 cases (52.3% showed mucosal thickening, and on the left side 36 cases (41.9% were diagnosed with mucosal thickening. Among 86 cases reported, 20 right maxillary sinus (23.3% and 25 left maxillary sinus (29.1% showed no signs of pathology. Conclusion: The incidental maxillary sinus pathologies are highly prevalent in asymptomatic patients. Therefore, oral radiologists should be aware of these incidental findings which will help in early diagnosis and treatment of disease.

A new species of Astyanax (Ostariophysi: Characidae from the headwaters of the arheic Río Sucuma, Catamarca, Northwestern Argentina

Directory of Open Access Journals (Sweden)

Guillermo E. Terán

2017-06-01

Full Text Available ABSTRACT A new species of Astyanax is described from the arheic system of Río Sucuma, in Catamarca, Northwestern Argentina. The new species is distinguished from its congeners by a combination of characters including the presence of a broad vertical humeral spot, absence of maxillary teeth, and absence of circuli in posterior field of scales. Furthermore, this species is distinguished by the orbital diameter, head length, branched anal-fin rays, perforated lateral-line scales, transverse scales, dentary teeth with abrupt decrease in size. This species is, to date, the single known fish endemic of Río Sucuma basin.

MAXILLARY INCISORS CHANGES DURING SPACE CLOSURE WITH CONVENTIONAL AND SKELETAL ANCHORAGE METHODS: A SYSTEMATIC REVIEW

Directory of Open Access Journals (Sweden)

Yasas Shri Nalaka JAYARATNE

2017-12-01

Full Text Available Purpose: The objective of this systematic review was to compare the antero-posterior, vertical and angular changes of maxillary incisors with conventional anchorage control techniques and mini-implant based space closure methods. Materials and Methods: The electronic databases Pubmed, Scopus, ISI Web of knowledge, Cochrane Library and Open Grey were searched for potentially eligible studies using a set of predetermined keywords. Full texts meeting the inclusion criteria as well as their references were manually searched. The primary outcome data (linear, angular, and vertical maxillary incisor changes and secondary outcome data (overbite changes, soft tissue changes, biomechanical factors, root resorption and treatment duration were extracted from the selected articles and entered into spreadsheets based on the type of anchorage used. The methodological quality of each study was assessed. Results: Six studies met the inclusion criteria. The amount of incisor retraction was greater with buccally placed mini-implants than conventional anchorage techniques. The incisor retraction with indirect anchorage from palatal mini-implants was less when compared with buccally placed mini-implants. Incisor intrusion occurred with buccal mini-implants, whereas extrusion was seen with conventional anchorage. Limited data on the biomechanical variables or adverse effects such as root resorption were reported in these studies. Conclusion: More RCT’s that take in to account relevant biomechanical variables and employ three-dimensional quantification of tooth movements are required to provide information on incisor changes during space closure.

Maxillary Transverse Comparison of Skeletal Class I and Class III Patient Populations Using Cone Beam Computed Tomography

Science.gov (United States)

2012-04-13

dental compensations 5. Have fully erupted canines (no...expansion. Compendium 1996;17:170-178. 2. Basaran G, Hamamci N, Hamamci O. Comparison of Dental Arch Widths in Different Types of Malocclusions . World... Dental and Alveolar Arch Widths in Normal Occlusion and Class III Malocclusion . Angle Orthod 2005; 75:809- 813.   36. Vanarsdall, Transverse dimension and long-term stability, Semin Orthod 1999;5:171–180.

Mandibular effects of maxillary distraction osteogenesis in cleft lip and palate.

Science.gov (United States)

Doucet, J-C; Herlin, C; Bigorre, M; Bäumler, C; Subsol, G; Captier, G

2014-06-01

Maxillary distraction osteogenesis (DO) is a reliable treatment for severe maxillary deficiency in cleft lip and palate (CLP). The objective was to analyze its long-term effects on the mandible. A retrospective study of 24 CLP treated with maxillary DO using the Polley and Figueroa technique was done; patients were followed for more than 4 years. Preoperative (T0), 6-12 months postoperative (T1), and ≥ 4 years postoperative (T2) cephalometric radiographs were evaluated. A classical cephalometric analysis was used to assess treatment stability, and a Procrustes superimposition method was used to assess local changes in the shape of the mandible. The mean age of patients at T0 was 15.4 ± 4.1 years. SNA increased at T1 and T2 (P Maxillary DO in CLP had no significant effect on the shape or rotation of the mandible. The maxillary advancement remained stable after 1 year. Copyright © 2014 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Maxillary sinusitis - a comparative study of different imaging diagnosis methods

International Nuclear Information System (INIS)

Hueb, Marcelo Miguel; Borges, Fabiano de Almeida; Pulcinelli, Emilte; Souza, Wandir Ferreira; Borges, Luiz Marcondes

1999-01-01

We conducted prospective study comparing different methods (plain X-rays, computed tomography and ultrasonography mode-A) for the initial diagnosis of maxillary sinusitis. Twenty patients (40 maxillary sinuses) with a clinical history suggestive of sinusitis included in this study. The results were classified as abnormal or normal, using computed tomography as gold standard. The sensitivity for ultrasonography and plain X-rays was 84.6% and 69.2%, respectively. The specificity of both methods was 92.6%. This study suggests that ultrasonography can be used as a good follow-up method for patients with maxillary. sinusitis. (author)

Imaging anatomy of the infraorbital ethmoid cells on multislice CT

International Nuclear Information System (INIS)

Pan Zhenyu; Qian Xiaojun; Gu Hua; Zhai Renyou

2008-01-01

Objective: To study the anatomic characteristics of the infraorbital ethmoid cells on multislice CT (MSCT) and explore the relationship between the infraobital ethmoid cells and mucosal swelling of sinuses. Methods: Two hundred sixty patients (520 sides) of consecutive axial scans by GE Hispeed VCT and the multiplanar reformation (MPR), virtual endoscopy(VE) reconstruction images by GE AW 4.2 workstation were reviewed retrospectively. The following CT features were assessed: (1) the anatomic characteristics of the infraobital ethmoid cells, including the frequency of identification, origin, classification, (2) presence of mucosal swelling of sinuses, (3) the maximal transversal diameter of the infraobital ethmoid cells in ostium of maxillary sinus (perpendicular to the uncinate process), and the diameter of the ostium of maxillary sinus, (4) presence of infraobital ethmoid cells inflammatory findings and a contact between the mucosal surface of the ostium of maxillary sinus. The results were analyzed by using Chi-square test and logistic regression analysis with the statistical software SPSS 11.5. Results: (1) Unilateral infraobital ethmoid cells were found in 68 patients (26.1%), and bilateral infraobital ethmoid cells were found in 81 patients (31.2%). Infraobital ethmoid cells were found in 230 sides on left side (120 sides) and right side(110 sides). (2)Infraobital ethmoid cells originated from the anterior ethmoid cells in 124 sides (53.9%) and from posterior ethmoidal cells in 62 sides (27%), originated from both the anterior ethmoidal cells and the posterior ethmoidal cells in 44 sides( 19. 1% ). (3)The classification of the infraobital ethmoid cells included three types. Infraobital ethmoid cells with different origination differed significantly in their types (X 2 =193.433, P 2 =1.824, P>0.05). The maximal transversal diameter of the infraobital ethmoid cells in ostium of maxillary sinus did not differ significantly between the cases with or without

Changes in root lengths of maxillary incisors during orthodontic retention period

Directory of Open Access Journals (Sweden)

Ravanmehr H

2006-01-01

Full Text Available Background and Aim: External apical root resorption is a common iatrogenic consequence of orthodontic treatment. Much controversy exists in the literature about changes in root lengths at post treatment periods. Although many practitioners believe that resorption becomes stable after active treatment, quantitative data are scarce. The purpose of this study was to determine quantitative changes in root lengths of maxillary incisors during fixed orthodontic post treatment period, and to assess if it is influenced by gender and factors related to active treatment. Materials and Methods: This was a case cross over study, performed on 80 patients (52 females and 28 males aged between 13 and 22 years. At debonding stage and beginning of retention phase of fixed orthodontic treatment, Hawley type retainer was fabricated for maxillary arch. Periapical radiographs of maxillary incisors using standard parallel technique were obtained immediately after debonding, and 3 and 7 months later. Crown and root lengths of maxillary incisors were measured using computer program. Changes in root lengths were calculated considering correction factors. Also associations between some factors and the change in root lengths during post treatment periods were assessed. These included gender, type of treatment plan (non extraction/extraction, technique (standard edgewise/straight-wire edgewise and duration of active treatment (less than 2 years/2 years and more. T-test and 4-way ANOVA were used for statistical analysis with P0.05 as the limit of significance. Results: No significant relation was found between apical root resorption of maxillary central incisors and time elapsed after treatment. Significant relation was observed between apical root resorption of maxillary lateral incisors and the length of post treatment period. No significant relation was found between root length changes of maxillary incisors during post treatment period and gender, type of treatment

Rapid maxillary distraction protocol utilizing the halo distraction system and rigid internal fixation.

Science.gov (United States)

Baker, Stephen B; Reid, Russell R; Burkey, Brooke; Bartlett, Scott P

2007-09-01

To shorten head frame wear time associated with external halo distraction (HD), we have adapted a protocol for maxillary distraction with the halo system that integrates plate fixation. All patients had a history of cleft lip and/or palate and maxillary retrusion > or = 8 mm. Five patients treated with this protocol and followed for at least 1 year were included in this study. The protocol included a 3-day latency period, variable maxillary distraction, and removal of the halo device with simultaneous rigid internal fixation. Two patients had a variable period of maxillomandibular fixation (MMF), which maintained the maxillary advancement and idealized intercuspal position while permitting further callus maturation. Cephalographs were obtained preoperatively, immediately following distractor removal, and 1 year after rigid internal fixation. The mean age at time of surgery was 18.7 years. The maxillary deficiency ranged from 8 to 15 mm (mean = 10.6 mm). All five patients demonstrated excellent occlusion. Cephalometric analysis 1-year post rigid internal fixation revealed minimal (maxillary distraction followed by MMF to maintain maxillary advancement may reduce halo device wear to 1 to 2 weeks. MMF optimizes occlusion by forcing the maxillary teeth into maximal intercuspal position. Rigid fixation is not only associated with less long-term relapse compared to nonrigid forms of fixation, but also minimizes the incidence of nonunion. This treatment protocol provides the advancement possible with distraction osteogenesis and the accuracy of orthognathic surgery, thereby minimizing external head frame wear.

Impact of the Distance of Maxillary Advancement on Horizontal Relapse After Orthognathic Surgery.

Science.gov (United States)

Fahradyan, Artur; Wolfswinkel, Erik M; Clarke, Noreen; Park, Stephen; Tsuha, Michaela; Urata, Mark M; Hammoudeh, Jeffrey A; Yamashita, Dennis-Duke R

2018-04-01

The maxillary horizontal relapse following Le Fort I advancement has been estimated to be 10% to 50%. This retrospective review examines the direct association between the amounts of maxillary advancement and relapse. We hypothesize that the greater the advancement, the greater the relapse amount. Patients with class III skeletal malocclusion underwent maxillary advancement with either a Le Fort I or a Le Fort I with simultaneous mandibular setback (bimaxillary surgery) from 2008 to 2015. Patients were assessed for a history of cleft lip or cleft palate. Patients with known syndromes were excluded. Cephalometric analysis was performed to compare surgical and postsurgical changes. Of 136 patients, 47.1% were males and 61.8% had a history of cleft. The mean surgery age was 18.9 (13.8-23) years and 53.7% underwent a bimaxillary procedure. A representative subgroup of 35 patients had preoperative, immediate postoperative, and an average of 1-year postoperative lateral cephalograms taken. The mean maxillary advancement was 6.3 mm and the horizontal relapse was 1.8 mm, indicating a 28.6% relapse. A history of cleft and amount of maxillary advancement were directly correlated, whereas bone grafting of the maxillary osteotomy sites was inversely correlated with the amount of relapse ( P < .05). Our data suggest positive correlation between amount of maxillary advancement and horizontal relapse as well as a positive correlation between history of cleft and horizontal relapse. Bone grafting of the maxillary osteotomy sites has a protective effect on the relapse.

Bilateral maxillary fused second and third molars: a rare occurrence.

Science.gov (United States)

Liang, Rui-Zhen; Wu, Jin-Tao; Wu, You-Nong; Smales, Roger J; Hu, Ming; Yu, Jin-Hua; Zhang, Guang-Dong

2012-12-01

This case report describes the diagnosis and endodontic therapy of maxillary fused second and third molars, using cone-beam computed tomography (CBCT). A 31-year-old Chinese male, with no contributory medical or family/social history, presented with throbbing pain in the maxillary right molar area following an unsuccessful attempted tooth extraction. Clinical examination revealed what appeared initially to be a damaged large extra cusp on the buccal aspect of the distobuccal cusp of the second molar. However, CBCT revealed that a third molar was fused to the second molar. Unexpectedly, the maxillary left third molar also was fused to the second molar, and the crown of an unerupted supernumerary fourth molar was possibly also fused to the apical root region of the second molar. Operative procedures should not be attempted without adequate radiographic investigation. CBCT allowed the precise location of the root canals of the right maxillary fused molar teeth to permit successful endodontic therapy, confirmed after 6 months.

Antrolith in the Maxillary Sinus; Report of a Case

Directory of Open Access Journals (Sweden)

A. Haraji

2006-06-01

Full Text Available A case of maxillary antrolith in a 14-year-old girl is presented. A radiopaque mass,thought to be a supernumerary tooth, was incidentally found on a panoramic radiograph obtained for orthodontic purposes. During surgical exploration the maxillary sinus was penetrated and 6 calcified masses were discovered. Histopathologic analysis revealed a calcium deposition around a necrotic mass.

Maxillary reconstruction: Current concepts and controversies

Directory of Open Access Journals (Sweden)

Subramania Iyer

2014-01-01

Full Text Available Maxillary reconstruction is still an evolving art when compared to the reconstruction of the mandible. The defects of maxilla apart from affecting the functions of the speech, swallowing and mastication also cause cosmetic disfigurement. Rehabilitation of the form and function in patients with maxillary defects is either by using an obturator prosthesis or by a surgical reconstruction. Literature is abundant with a variety of reconstructive methods. The classification systems are also varied, with no universal acceptance of any one of them. The oncologic safety of these procedures is still debated, and conclusive evidence in this regard has not emerged yet. Management of the orbit is also not yet addressed properly. Tissue engineering, that has been hyped to be one of the possible solutions for this vexing reconstructive problem, has not come out with reliable and reproducible results so far. This review article discusses the rationale and oncological safety of the reconstructing the maxillary defects, critically analyzes the classification systems, offers the different reconstructive methods and touches upon the controversies in this subject. The management of the retained and exenterated orbit associated with maxillectomy is reviewed. The surgical morbidity, complications and the recent advances in this field are also looked into. An algorithm, based on our experience, is presented.

Maxillary reconstruction: Current concepts and controversies

Science.gov (United States)

Iyer, Subramania; Thankappan, Krishnakumar

2014-01-01

Maxillary reconstruction is still an evolving art when compared to the reconstruction of the mandible. The defects of maxilla apart from affecting the functions of the speech, swallowing and mastication also cause cosmetic disfigurement. Rehabilitation of the form and function in patients with maxillary defects is either by using an obturator prosthesis or by a surgical reconstruction. Literature is abundant with a variety of reconstructive methods. The classification systems are also varied, with no universal acceptance of any one of them. The oncologic safety of these procedures is still debated, and conclusive evidence in this regard has not emerged yet. Management of the orbit is also not yet addressed properly. Tissue engineering, that has been hyped to be one of the possible solutions for this vexing reconstructive problem, has not come out with reliable and reproducible results so far. This review article discusses the rationale and oncological safety of the reconstructing the maxillary defects, critically analyzes the classification systems, offers the different reconstructive methods and touches upon the controversies in this subject. The management of the retained and exenterated orbit associated with maxillectomy is reviewed. The surgical morbidity, complications and the recent advances in this field are also looked into. An algorithm, based on our experience, is presented. PMID:24987199

Two-rooted maxillary first molars with two canals: a case series.

Science.gov (United States)

Shakouie, Sahar; Mokhtari, Hadi; Ghasemi, Negin; Gholizadeh, Seddigheh

2013-01-01

Thorough understanding of the anatomic and internal morphology of a root canal system is absolutely essential for the success of endodontic treatment. Since permanent maxillary first molars have shown variation in internal anatomy, morphology, this tooth has been reviewed extensively. Presence of two canals in a two-rooted maxillary first molar has rarely been reported in studies describing tooth and root canal anatomies. In this report, three cases are presented, which involve the root canal treatment of maxillary first molars with fusion of the two buccal roots.

Management of Cleft Maxillary Hypoplasia with Anterior Maxillary Distraction: Our Experience

OpenAIRE

Chacko, Tojan; Vinod, Sankar; Mani, Varghese; George, Arun; Sivaprasad, K. K.

2013-01-01

Maxillary hypoplasia is a common developmental problem in cleft lip and palate deformities. Since 1970s these deformities have traditionally been corrected by means of orthognathic surgery. Management of skeletal deformities in the maxillofacial region has been an important challenge for maxillofacial surgeons and orthodontists. Distraction osteogenesis is a surgical technique that uses body’s own repairing mechanisms for optimal reconstruction of the tissues. We present four cases of anterio...

Progressive immediate loading of a perforated maxillary sinus dental implant: a case report

Directory of Open Access Journals (Sweden)

Al-Juboori MJ

2015-01-01

Full Text Available Mohammed Jasim Al-Juboori Department of Oral Surgery, MAHSA University, Kuala Lumpur, Malaysia Abstract: The displacement of a dental implant into the maxillary sinus may lead to implant failure due to exposure of the apical third or the tip of the implant beyond the bone, resulting in soft tissue growth. This case report discusses dental implant placement in the upper first molar area with maxillary sinus involvement of approximately 2 mm. A new technique for progressive implant loading was used, involving immediately loaded implants with maxillary sinus perforation and low primary stability. Follow-up was performed with resonance frequency analysis and compared with an implant placed adjacent in the upper second premolar area using a conventional delayed loading protocol. Implants with maxillary sinus involvement showed increasing stability during the healing period. We found that progressive implant loading may be a safe technique for the placement of immediately loaded implants with maxillary sinus involvement. Keywords: progressive implant loading, resonance frequency analysis, implant stability, provisional crown, bone density, maxillary sinus

Maxillary First Molars with 2 Distobuccal Canals: A Case Series.

Science.gov (United States)

Fogel, Howard M; Cunha, Rodrigo Sanches

2017-11-01

An appreciation of the anatomic complexity of the root canal system is essential at every step of endodontic treatment. Endodontic treatment of teeth with unusual root canal anatomy presents a unique challenge. Eight patients underwent nonsurgical root canal treatment of 3-rooted maxillary first molars in a specialty endodontic private practice. Four cases of Weine type II and 4 cases of Weine type III canal configurations in the distobuccal root of maxillary first molars were presented.This article highlighted an uncommon anatomic variation of 2 canals in the distobuccal root of the maxillary first molar. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Maxillary sinus by-pass with tilted implants via tapered-screw bone expanders in low density bone: one year follow -up of a case series.

Science.gov (United States)

Andreasi Bassi, M; Andrisani, C; Lopez, M A; Gaudio, R M; Lombardo, L; Lauritano, D

2016-01-01

In the present paper the use of tapered-screw bone expanders (TSBEs) is proposed, in combination with the placement of tilted implants in close proximity to the anterior sinus wall, solving the problem of the reduced height of the alveolar bone in the sub-antral area. The Authors named the procedure: Tilted Implant Expansion Osteotomy (TIEO). Fifteen patients (10 females and 5 males, mean age 47.8±8.15 years) with distal edentulous maxillae were enrolled in this study. For each edentulous site 2 implants were placed, the anterior implant in the area of the most anterior missing tooth while, the posterior implant, immediately in front of the maxillary sinus, with an inclined position. Adopting the aforesaid procedure, 34 cylindrical two-piece implants were placed, 17 of which were placed in tilted position, in order to by-pass the maxillary sinus. After a healing period of 4-6 months, the second stage surgery was performed. The cases were finalized by metal-ceramic cementable restorations with a variable number of elements, from 2 to 4, without any cantilever element. The post finalization follow-up was at 12 months. Survival rate was 100% since no fixtures were lost. At the one-year follow-up the clinical and radiological appearance of the soft and hard tissues was optimal and no pathological signs were recorded. TIEO is a promising surgical procedure for oral rehabilitation of maxillary edentulous sites and represents a therapeutic alternative to sinus lift techniques.

Atypical Case of Three Dental Implants Displaced into the Maxillary Sinus

Directory of Open Access Journals (Sweden)

João Felipe Bonatto Bruniera

2015-01-01

Full Text Available Oral rehabilitation with dental implants has become a routine treatment in contemporary dentistry. The displacement of dental implants into the sinus membrane, a complication related to the maxillary sinus, is one of the most common accidents reported in the literature. The treatment for this complication is the surgical removal of the implant. A 60-year-old woman with three dental implants displaced into the maxillary sinus (one implant displaced into the left maxillary sinus and two implants displaced into the right maxillary sinus underwent surgery for removal of the implants. The surgery to remove the implants was performed under local anesthesia through the Caldwell-Luc technique. The patient was subsequently administered antibiotic, anti-inflammatory, and analgesic drugs. The patient returned 7 days after the surgery for suture removal and is being regularly monitored to determine whether future rehabilitation of the edentulous area is necessary. In conclusion, surgical removal of the dental implant displaced into the maxillary sinus is the treatment of choice. This technique is appropriate because it allows the use of local anesthesia and provides direct visualization for the removal of the implants.

Comparison of the Distances between the Maxillary Sinus Floor and Root-Tips of the First and Second Maxillary Molar Teeth Using Panoramic Radiography among Dolichocephalic and Brachycephalic and Mesocephalic Individuals

Directory of Open Access Journals (Sweden)

Hamidreza Arabion

2015-06-01

Full Text Available Introduction: Comparison of the relationships and distance between maxillary root tips and   the maxillary sinus floor using oral panoramic in the dolichocephalic and brachycephalic compared to mesocephalic individuals. Methods: Oral panoramic images from 300 individuals were analyzed and the relationships and distance between the maxillary root tips and the sinus floor was assessed by qualitative and quantitative variables. Results: The distance was significantly higher in the brachycephalic groups than that of the mesocephalic, and the mesocephalic group showed longer distance in comparison to dolichocephalic individuals. Qualitative comparison showed that type 1 relationship was the dominant position in the brachycephalic individuals while most of dolichocephalic individuals demonstrated type 2 and 3 relationships of the molar root tips and the maxillary sinus floor. Conclusion: Higher distances between the molar root tips and the maxillary sinus floor could be expected in the brachycephalic than mesocephalic and dolichocephalic individuals

Prevalence Of Maxillary Sinus Jaw Mucuous Cysts In University Dental Radiology Service

Directory of Open Access Journals (Sweden)

Joaquim Lira Saraiva Neto

2017-07-01

Full Text Available Background: Mucosal cyst of the maxillary sinus or antral pseudocyst is one of great importance injury, being the pathology that affects more the maxillary sinus. Their discovery, in most cases, it is for the interpretation of the images in routine panoramic radiography. Aims: The research aimed to evaluate the prevalence of mucous cyst in maxillary sinus in radiology clinic at Ceara Federal University. Material and Methods: To this study conduction, were analyzed 1996 panoramic radiographs from a digital file obtained between April 2011 to April 2013 Results:. Aspects as gender, affected side and teeth absence next to the cyst in the respective quadrant were evaluated.It was observed in the sample the occurrence of 45 patients with suggested images of mucous cysts in maxillary sinus,making a prevalence of 2,25%. From them, 26 (57,8%were female and 19 (42,2% were male. 48 maxillary sinuswere affected with the wound, from which28 (58,3% it was in the left side and 20 (41,7% in the right site. Three patients presented the wound in both sides, what represents 6,7% of the affected patients. From those 48 Mucous retention cyst, 40 (83,3% were not related to an edentulous area in ipsilateral quadrant and 8 (16,7% were shown next to an edentulous area. Conclusion: The conclusion was that the cyst of retention mucous in the maxillary sinus had prevalence in males and in the left side of the maxillary sinus. It was not found a relation between the cyst and the edentulous area.

Intensity-modulated radiotherapy (IMRT) for carcinoma of the maxillary sinus: A comparison of IMRT planning systems

International Nuclear Information System (INIS)

Ahmed, Raef S.; Ove, Roger; Duan, Jun; Popple, Richard; Cobb, Glenn

2006-01-01

The treatment of maxillary sinus carcinoma with forward planning can be technically difficult when the neck also requires radiotherapy. This difficulty arises because of the need to spare the contralateral face while treating the bilateral neck. There is considerable potential for error in clinical setup and treatment delivery. We evaluated intensity-modulated radiotherapy (IMRT) as an improvement on forward planning, and compared several inverse planning IMRT platforms. A composite dose-volume histogram (DVH) was generated from a complex forward planned case. We compared the results with those generated by sliding window fixed field dynamic multileaf collimator (MLC) IMRT, using sets of coplanar beams. All setups included an anterior posterior (AP) beam, and 3-, 5-, 7-, and 9-field configurations were evaluated. The dose prescription and objective function priorities were invariant. We also evaluated 2 commercial tomotherapy IMRT delivery platforms. DVH results from all of the IMRT approaches compared favorably with the forward plan. Results for the various inverse planning approaches varied considerably across platforms, despite an attempt to prescribe the therapy similarly. The improvement seen with the addition of beams in the fixed beam sliding window case was modest. IMRT is an effective means of delivering radiotherapy reliably in the complex setting of maxillary sinus carcinoma with neck irradiation. Differences in objective function definition and optimization algorithms can lead to unexpected differences in the final dose distribution, and our evaluation suggests that these factors are more significant than the beam arrangement or number of beams

Maxillary overdentures retained by splinted and unsplinted implants : A retrospective study

NARCIS (Netherlands)

Narhi, TO; Hevinga, M; Voorsmit, RACA; Kalk, W

2001-01-01

The purpose of this retrospective study was to evaluate the clinical performance of and patients' satisfaction with maxillary overdentures retained by splinted and unsplinted implants. Patients who had been treated with maxillary implant-retained overdentures because of functional problems with

Efficacy and feasibility of frontozygomatic angle approach for extra oral maxillary nerve block in oral surgery: a descriptive clinical trial.

Science.gov (United States)

Radder, Kiran; Shah, Ashwin; Fatima, Shereen; Kothari, Chaitanya; Zakaullah, Syed; Siddiqua, Aaisha

2014-09-01

and the infraorbital fossa respectively. Peak effect of anesthesia was noted in 66.7, 37.38 and 31.71 s (all values expressed as mean) in palate, infraorbital fossa and posterior superior alveolar areas respectively. Although with only dental extraction as the procedure of choice, the present study has favoured the frontozygomatic angle approach for the maxillary nerve block as simple, safe, efficacious and associated with minimum and clinically mild complications.

Augmented reality as an aid in maxillofacial surgery: validation of a wearable system allowing maxillary repositioning.

Science.gov (United States)

Badiali, Giovanni; Ferrari, Vincenzo; Cutolo, Fabrizio; Freschi, Cinzia; Caramella, Davide; Bianchi, Alberto; Marchetti, Claudio

2014-12-01

We present a newly designed, localiser-free, head-mounted system featuring augmented reality as an aid to maxillofacial bone surgery, and assess the potential utility of the device by conducting a feasibility study and validation. Our head-mounted wearable system facilitating augmented surgery was developed as a stand-alone, video-based, see-through device in which the visual features were adapted to facilitate maxillofacial bone surgery. We implement a strategy designed to present augmented reality information to the operating surgeon. LeFort1 osteotomy was chosen as the test procedure. The system is designed to exhibit virtual planning overlaying the details of a real patient. We implemented a method allowing performance of waferless, augmented-reality assisted bone repositioning. In vitro testing was conducted on a physical replica of a human skull, and the augmented reality system was used to perform LeFort1 maxillary repositioning. Surgical accuracy was measured with the aid of an optical navigation system that recorded the coordinates of three reference points (located in anterior, posterior right, and posterior left positions) on the repositioned maxilla. The outcomes were compared with those expected to be achievable in a three-dimensional environment. Data were derived using three levels of surgical planning, of increasing complexity, and for nine different operators with varying levels of surgical skill. The mean error was 1.70 ± 0.51 mm. The axial errors were 0.89 ± 0.54 mm on the sagittal axis, 0.60 ± 0.20 mm on the frontal axis, and 1.06 ± 0.40 mm on the craniocaudal axis. The simplest plan was associated with a slightly lower mean error (1.58 ± 0.37 mm) compared with the more complex plans (medium: 1.82 ± 0.71 mm; difficult: 1.70 ± 0.45 mm). The mean error for the anterior reference point was lower (1.33 ± 0.58 mm) than those for both the posterior right (1.72 ± 0.24 mm) and posterior left points (2.05 ± 0.47 mm). No significant difference

Accuracy of maxillary positioning after standard and inverted orthognathic sequencing.

Science.gov (United States)

Ritto, Fabio G; Ritto, Thiago G; Ribeiro, Danilo Passeado; Medeiros, Paulo José; de Moraes, Márcio

2014-05-01

This study aimed to compare the accuracy of maxillary positioning after bimaxillary orthognathic surgery, using 2 sequences. A total of 80 cephalograms (40 preoperative and 40 postoperative) from 40 patients were analyzed. Group 1 included radiographs of patients submitted to conventional sequence, whereas group 2 patients were submitted to inverted sequence. The final position of the maxillary central incisor was obtained after vertical and horizontal measurements of the tracings, and it was compared with what had been planned. The null hypothesis, which stated that there would be no difference between the groups, was tested. After applying the Welch t test for comparison of mean differences between maxillary desired and achieved position, considering a statistical significance of 5% and a 2-tailed test, the null hypothesis was not rejected (P > .05). Thus, there was no difference in the accuracy of maxillary positioning between groups. Conventional and inverted sequencing proved to be reliable in positioning the maxilla after LeFort I osteotomy in bimaxillary orthognathic surgeries. Copyright © 2014 Elsevier Inc. All rights reserved.

Management of unerupted maxillary deciduous central incisor: a case report.

Science.gov (United States)

Shakra, Karam Abu

2014-01-01

Failure of eruption of primary teeth can be considered rare, especially in maxillary anterior teeth. The problem can be either mechanical obstruction of eruption or a failure of the eruption mechanism. This case report presents failure of eruption of the maxillary right deciduous central incisor in a 4-year-old girl. The unerupted primary tooth was removed surgically. The histological finding revealed fibroma with reactive giant cells. Periodic follow-up visits were advised to monitor the developing dentition and to ensure enough space for the permanent incisor. How to cite this article: Shakra KA. Management of Unerupted Maxillary Deciduous Central Incisor: A Case Report. Int J Clin Pediatr Dent 2014;7(1):58-60.

The correction of maxillary defciency with internal distraction devices: a multidisciplinary approach.

Science.gov (United States)

Oz, A Alper; Ozer, Mete; Eroglu, Lütfi; Ozdemir, Oguz Suleyman

2013-09-01

The purpose of this case report is to present the orthodontic, surgical and restorative treatments in the case of an operated cleft lip and palate and severe maxillary defciency in a 14-year-old female patient. Only orthodontic treatment could be ineffcient for cleft lip and palate patients characterized with maxillary hypoplasia. Orthodontic and surgical treatment shows suffcient results, especially with severe skeletal defciency. A cleft lip and palate patient required complex multidisciplinary treatment to preserve health and restore esthetics. Dental leveling and alignment of the maxillary and mandibular teeth were provided before the surgery. Maxillary advancement and clockwise rotation of the maxillary-mandibular complex was applied by a Le Fort 1 osteotomy with two internal distraction devices. After the active treatment including orthodontic treatment and orthognathic surgery, upper full mouth ceramic restoration was applied. This report shows the efficiency of internal distraction devices in cleft lip palate patients and exemplifes the multidisciplinary care required for such diffcult cases. Clinical signifcance: Stable improved occlusion and skeletal relations were observed after a follow-up examination period of 12 months.

Incomplete mobilization of the maxilla resulting in failed maxillary distraction: a case report.

Science.gov (United States)

Alkan, Alper; Inal, Samet; Baş, Burcu; Ozer, Mete

2007-12-01

Maxillary distraction osteogenesis has become an accepted alternative method in the treatment of patients with severe maxillary hypoplasia in craniofacial syndromes and cleft-related deformities. Insufficient distraction, undesirable soft tissue changes, and occurrence of defective distraction vectors are among the potential complications of intraoral maxillary distraction osteogenesis. A 2-stage procedure combining maxillary advancement by distraction technique with genioplasty and mandibular setback surgery was planned to correct jaw deformities in a 22-year-old patient with severe maxillary retrusion, mandibular prognathism, and excessive lower facial height. In the first stage, osteotomies were performed and maxilla was lightly mobilized after down-fracture. Distractors were placed to the maxilla intraorally. During activation period, the maxilla rotated in a clockwise direction, producing a discrepancy between the planned and the actual vectors. Complete distraction was unsatisfactory and the complication was due to surgical technique. This case report presents the failure of maxillary distraction due to incomplete mobilization of the maxilla. Treatment of the case was achieved by the conventional osteotomy techniques at final operation. The maxilla was successfully advanced to the desired position producing good occlusion and an improved facial profile.

Maxillary sinus floor elevation surgery - A clinical, radiographic and endoscopic evaluation

NARCIS (Netherlands)

Timmenga, NM; Raghoebar, GM; van Weissenbruch, R; Vissink, A

Although augmentation of the maxillary sinus floor with autogenous bone grafts has become a well established preimplantology procedure, its effect on the function of the maxillary sinus has not been the subject of prospective human studies. In this prospective study the effects of sinus floor

Comparative study of different osteotomy modalities in maxillary distraction osteogenesis for cleft lip and palate.

Science.gov (United States)

Yu, Hongbo; Wang, Xudong; Fang, Bing; Shen, Steve Guofang

2012-11-01

Conventional maxillary distraction osteogenesis and anterior maxillary segmental distraction were applied in the treatment of severe maxillary hypoplasia secondary to cleft clip and palate. The aim of the present study was to compare the difference between these 2 osteotomy modalities used for rigid external distraction. Ten patients with severe maxillary hypoplasia secondary to CLP were enrolled in our study. They were randomly divided into 2 groups. Conventional maxillary distraction osteogenesis was performed in 5 patients and anterior maxillary segmental distraction in 5 patients. The preoperative and postoperative lateral cephalograms were compared, and cephalometric analysis was performed. The independent sample t test was used to evaluate the differences between the 2 groups. All patients healed uneventfully, and the maxillae moved forward satisfactorily. The sella-nasion-point A angles, nasion-point A-Frankfort horizontal plane angles, overjets, and 0-meridian to subnasale distances had increased significantly after distraction osteogenesis. Significant differences were found in the changes in palatal length between the 2 groups (P maxillary segmental distraction group. No significant difference in the changes in palatopharyngeal depth or soft palatal length was found. With the ability of increasing the palatal and arch length, avoiding changes in palatopharyngeal depth, and preserving palatopharyngeal closure function, anterior maxillary segmental distraction has great value in the treatment of maxillary hypoplasia secondary to CLP. It is a promising and valuable technique in this potentially complicated procedure. Copyright © 2012 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Cephalometric Analysis for Gender Determination Using Maxillary Sinus Index: A Novel Dimension in Personal Identification

Directory of Open Access Journals (Sweden)

Tanya Khaitan

2017-01-01

Full Text Available Purpose. Radiography is important in forensic odontology for the identification of humans. The maxillary sinus is the largest of the paranasal sinuses and first to develop. Sinus radiography has been used for identification of skeletal remains and determination of gender. Hence, the aim and objectives of the present study were to establish a new method for gender determination using maxillary sinus index from lateral cephalometric radiographs and to establish the reliability of maxillary sinus for gender determination. Methods. A total of 50 adult digital lateral cephalometric radiographs (25 males and 25 females were included in the study. The maxillary sinus analysis was performed on these radiographs using the height and width measurement tools of Sidexis XG software. Maxillary sinus index was calculated, discriminant function analysis performed, and discriminant equation derived for determination of gender. Results. The mean maxillary sinus height and width were found to be higher in males, whereas the maxillary sinus index was greater in females. The discriminant function analysis derived in the study was able to differentiate the sex groups with sensitivity of 68% and specificity of 76%. Conclusions. From the results of the present study, it may be concluded that morphometric analysis of maxillary sinus can be used as a reliable tool in gender determination.

A case report of an inverted papilloma infiltrating into maxillary sinus

International Nuclear Information System (INIS)

Ji, Yong Hwa; Choi, Bo Ram; Huh, Kyung Hoe; Lee, Sam Sun; An, Chang Hyeon

2009-01-01

The present study reports a case of inverted papilloma of the nasal cavity and infiltrating into the maxillary sinus. Inverted papilloma is an uncommon and locally aggressive benign tumor of the sinonasal region. The patient, 51-year-old male, presented with unilateral nasal obstruction and periodic swelling on the palate without pain. Enhanced CT scan revealed a heterogeneously enhancing solid mass in the nasal cavity and infiltrating into the right maxillary sinus, as well as an incidental, secondarily infected residual cyst in the periapical area of the right maxillary canine. The sinonasal mass was revealed as an inverted papilloma on histopathologic examination.

A case report of an inverted papilloma infiltrating into maxillary sinus

Energy Technology Data Exchange (ETDEWEB)

Ji, Yong Hwa; Choi, Bo Ram; Huh, Kyung Hoe; Lee, Sam Sun [School of Dentistry, Seoul National University, Seoul (Korea, Republic of); An, Chang Hyeon [Department of Oral and Maxillofacial Radiology, School of Dentistry, Kyungpook National University, Daegu (Korea, Republic of)

2009-06-15

The present study reports a case of inverted papilloma of the nasal cavity and infiltrating into the maxillary sinus. Inverted papilloma is an uncommon and locally aggressive benign tumor of the sinonasal region. The patient, 51-year-old male, presented with unilateral nasal obstruction and periodic swelling on the palate without pain. Enhanced CT scan revealed a heterogeneously enhancing solid mass in the nasal cavity and infiltrating into the right maxillary sinus, as well as an incidental, secondarily infected residual cyst in the periapical area of the right maxillary canine. The sinonasal mass was revealed as an inverted papilloma on histopathologic examination.

New fixation method for maxillary distraction osteogenesis using locking attachments.

Science.gov (United States)

Suzuki, Eduardo Yugo; Buranastidporn, Boonsiva; Ishii, Masatoshi

2006-10-01

The external traction hooks of the intraoral splint used in the rigid external distraction (RED) system for maxillary distraction osteogenesis interfere with the surgical procedures. The purpose of this study is to introduce an innovative splint fixation method for maxillary distraction osteogenesis with Locking Attachments and evaluate their advantages, such as reduction of operating time compared with the traditional intraoral splint method. Retrospective comparison of operative times of maxillary Le Fort I osteotomy procedures was carried out with the traditional protocol using the intraoral splint cemented to the maxillary dentition (n = 14), and a removable intraoral splint that is inserted postsurgically (n = 14). Operative procedure times were compared and analyzed statistically using the data extracted from the surgical records. There were no complications inserting the removable splint postsurgically, including pain, discomfort, or time-consuming procedure. Stable and secure splint fixation was obtained before the distraction procedure and the desired treatment goals were obtained in all patients. The total operative procedure times were significantly reduced in the Locking Attachments group by 24% to 41% (approximately 65 minutes) compared with earlier operations involving the conventional splints (P Maxillary distraction osteogenesis with the Locking Attachments is a highly effective fixation approach to manage severe hypoplastic maxilla, eliminating lip constraints resulting from scarring and allowing for easier, more deliberate and careful dissection. The use of the Locking Attachments is reliable in craniofacial surgery and has proved to be advantageous in the reduction of the operating time and surgical risks.

Fetal and neo-natal maxillary ontogeny in extant humans and the utility of prenatal maxillary morphology in predicting ancestral affiliation

Science.gov (United States)

Nicholas, Christina L.

2016-01-01

Objectives The midface of extant H. sapiens is known to undergo shape changes through fetal and neo-natal ontogeny; however, little work has been done to quantify these shape changes. Further, while midfacial traits which vary in frequency between populations of extant humans are presumed to develop prenatally, patterns of population-specific variation maxillary shape across ontogeny are not well documented. Only one study of fetal ontogeny which included specific discussion of the midface has taken a 3D geometric morphometric approach, and that study was limited to one population (Japanese). The present research project seeks to augment our understanding of fetal maxillary growth patterns, most especially in terms of intraspecific variation. Materials and Methods Three-dimensional coordinate landmark data were collected on the right maxillae of 102 fetal and neo-natal individuals from three groups (Euro-American, African-American, “Mixed Ancestry”). Results Shape changes were seen mainly in the lateral wall of the piriform aperture, the anterior nasal spine, and the subnasal alveolar region. The greatest difference across age groups (2nd Trimester, 3rd Trimester, Neonates) was between the second and third trimester. Euro-Americans and African-Americans clustered by population and differences in midfacial morphology related to ancestry could be discerned as early as the second trimester (p=0.002), indicating that population variation in maxillary morphology appears very early in ontogeny. Discussion The midface is a critical region of the skull for assessing ancestry and these results indicate that maxillary morphology may be useful for estimating ancestry for prenatal individuals as young as the second trimester. PMID:27412693

Unusual anatomy of maxillary central incisor with two roots

OpenAIRE

T S Ashwini Shivakumar; Saleem Makandar; Ajay Kadam

2012-01-01

Introduction: Knowledge of root canal morphology is essential for successful endodontic therapy. Failure to recognize unusual root canal anatomy may lead to unsuccessful endodontic treatment. Case Report: This case report describes the successful endodontic treatment of the maxillary central incisor with unusual anatomy of two roots and two root canals. A 23-year-old male patient was referred for dental consultation with discoloration of the maxillary right central incisor with periapical les...

Maxillary fractures: a review of 56 cases in a university affiliated hospital

Directory of Open Access Journals (Sweden)

Farahvash MR

2009-07-01

Full Text Available "n Normal 0 false false false EN-US X-NONE AR-SA MicrosoftInternetExplorer4 st1":*{behavior:url(#ieooui } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi;} Background: The aim of this study was to describe the prevalence of different types of maxillary fractures, concurrent fractures and accompanying signs and symptoms. Trauma is the second cause of mortality in Iran, after cardiovascular diseases. In traumatic patients, head, neck and facial bones fractures are common. The maxillary fractures are seen much less commonly than the fractures of the mandible, zygoma, or nose. Maxillary fractures include: (Le fort I, II, III fractures- alveolar process fracture and Sagittal fracture. The most common cause of maxillary fracture is motor vehicle accidents. "n"n Methods: This descriptive cross sectional study designed on 56 patients with maxillary fractures in a referral educational trauma center of Tehran. Sample size was the patients who referred to this hospital with maxillary fracture during past seven years. "n"nResults: Forty eight (86% patients were male and 8(14% were female. Male to female ratio was 6/1. Mean age of patients was 30 years. The most common type of maxillary fracture was infra orbital rim and floor fracture. Among Le fort fracture; Le fort type II was the most common. Paresthesia of infra orbital nerve and malocclusion were

Pediatric maxillary fractures.

Science.gov (United States)

Yu, Jack; Dinsmore, Robert; Mar, Philip; Bhatt, Kirit

2011-07-01

Pediatric craniofacial structures differ from those of adults in many ways. Because of these differences, management of pediatric craniofacial fractures is not the same as those in adults. The most important differences that have clinical relevance are the mechanical properties, craniofacial anatomy, healing capacity, and dental morphology. This article will review these key differences and the management of pediatric maxillary fractures. From the mechanical properties' perspective, pediatric bones are much more resilient than adult bones; as such, they undergo plastic deformation and ductile failure. From the gross anatomic perspective, the relative proportion of the cranial to facial structures is much larger for the pediatric patients and the sinuses are not yet developed. The differences related to dentition and dental development are more conical crowns, larger interdental spaces, and presence of permanent tooth buds in the pediatric population. The fracture pattern, as a result of all the above, does not follow the classic Le Fort types. The maxillomandibular fixation may require circum-mandibular wires, drop wires, or Ivy loops. Interfragmentary ligatures using absorbable sutures play a much greater role in these patients. The use of plates and screws should take into consideration the future development with respect to growth centers and the location of the permanent tooth buds. Pediatric maxillary fractures are not common, require different treatments, and enjoy better long-term outcomes.

The value of Waters' projection for assessing maxillary sinus inflammatory disease

NARCIS (Netherlands)

Timmenga, N; Stegenga, B; Raghoebar, G; van Hoogstraten, J; van Weissenbruch, R; Vissink, A

Objective. The significance of the Waters' projection for judging maxillary mucosal disease is, at the least, questionable. The aim of this study was to evaluate the diagnostic use of Waters' projection of the maxillary sinus with particular regard to sinus mucosal swelling as a consistent sign of

Posterior glenoid rim deficiency in recurrent (atraumatic) posterior shoulder instability

International Nuclear Information System (INIS)

Weishaupt, D.; Zanetti, M.; Hodler, J.; Nyffeler, R.W.; Gerber, C.

2000-01-01

Objective. To assess the shape of the posterior glenoid rim in patients with recurrent (atraumatic) posterior instability.Design and patients. CT examinations of 15 shoulders with recurrent (atraumatic) posterior instability were reviewed in masked fashion with regard to abnormalities of the glenoid shape, specifically of its posterior rim. The glenoid version was also assessed. The findings were compared with the findings in 15 shoulders with recurrent anterior shoulder instability and 15 shoulders without instability. For all patients, surgical correlation was available.Results. Fourteen of the 15 (93%) shoulders with recurrent (atraumatic) posterior shoulder instability had a deficiency of the posteroinferior glenoid rim. In patients with recurrent anterior instability or stable shoulders such deficiencies were less common (60% and 73%, respectively). The craniocaudal length of the deficiencies was largest in patients with posterior instability. When a posteroinferior deficiency with a craniocaudal length of 12 mm or more was defined as abnormal, sensitivity and specificity for diagnosing recurrent (atraumatic) posterior instability were 86.7% and 83.3%, respectively. There was a statistically significant difference in glenoid version between shoulders with posterior instability and stable shoulders (P=0.01).Conclusion. Recurrent (atraumatic) posterior shoulder instability should be considered in patients with a bony deficiency of the posteroinferior glenoid rim with a craniocaudal length of more than 12 mm. (orig.)

Avaliação das alterações dentárias na maxila em pacientes submetidos à expansão rápida da maxila assistida cirurgicamente sem o envolvimento da sutura pterigomaxilar Assessment of maxillary dental changes in patients submitted to surgically assisted rapid maxillary expansion with no involvement of pterygoid blade

Directory of Open Access Journals (Sweden)

Paulo Roberto Pelucio Camara

2009-12-01

appliance in patients who underwent surgically assisted rapid maxillary expansion (SARME, as well as the effectiveness of the surgical technique used. The sample was composed of 34 pairs of cast models, of 17 patients - 6 males and 11 females. METHODS: The measurements were performed on cast models, by measuring the changes on the vertical and transversal planes. The surgical procedure used was the lateral osteotomy on maxillary walls with no involvement of the pterygoid blade, osteotomy of nasal spine on dental midline (anterior central incisors, chisel separation of palatine suture, and separation of the nasal septum. The activation was initiated on the third postoperative day, consisting of two activations, one in the morning and another at night. RESULTS: There were statistically significant expansions in the regions of canines, first and second premolars, first molars, and second molars; respectively, 6.03 mm, 9.82 mm, 8.66 mm, 9.72 mm, and 5.67 mm. The evaluation of the behavior of the support teeth of the expansion appliance regarding the inclination of the dental crowns has shown that an asymmetric vestibularization had taken place, because the values found for the first molars were 6.89º (right and 9.56º (left; the values for the first premolars were 4.74º (left and 3.26º (right; this last value was not statistically significant. CONCLUSIONS: The surgical technique used in this research has been shown to be efficient to obtain maxillary transversal alterations, and there was dental-alveolar inclination of the support teeth of the expansion appliance.

Exophthalmos associated to orbital zygomatic mucocele and complex maxillary malformation in a puppy

Directory of Open Access Journals (Sweden)

Alessandro Cirla

2017-08-01

Full Text Available A case of exophthalmos due to zygomatic mucocele in a puppy with ipsilateral segmental maxillary atrophy is reported. A 7-month-old, mixed breed, male dog suffered the sudden-onset of unilateral painful exophthalmos and a gradual swelling of the right temporal region. A compressing, right retrobulbar mass was observed by ultrasound. Computed tomography revealed a large multiloculated cyst-like lesion of the right zygomatic gland projecting into the orbital space, thus displacing the eyeball. The ipsilateral molar part of the maxillary bone was underdeveloped, besides showing crowded, abnormal, multiple, unerupted maxillary molar teeth in the caudal maxillary region. Modified lateral orbitotomy and a selective caudal maxillary bone access were performed. The cyst-like lesion was removed and the zygomatic gland and the wall was collected for histology, which confirmed the mucocele. Clinical and imaging examinations six months after surgery showed neither recurrence of the mucocele nor ocular abnormalities. A possible common pathogenic mechanism involving these two conditions could be hypothesized.

Radiodense concretions in maxillary sinus aspergillosis: pathogenesis and the role of CT densitometry

International Nuclear Information System (INIS)

Lenglinger, F.X.; Krennmair, G.; Mueller-Schelken, H.; Artmann, W.

1996-01-01

The purpose of this study was to investigate by CT the origin of radiodense maxillary sinus concretions and whether CT densitometry is effective in the prediction of maxillary sinus aspergillosis and in the differentiation of the origin of these concretions. In a prospective study in 21 patients with radiodense maxillary sinus concretions detected by radiography, a preoperative CT study of the paranasal sinuses and the concretions was undertaken. Additional scans of the upper alveolar ridge were also performed. Radiological findings were compared with clinical symptoms and with CT findings, especially CT densitometry of the sinus concretions and dental root-filling material. All patients underwent a functional Caldwell-Luc operation; histological and microbiological examinations were performed. Fifteen of the 21 patients (71.4%) with radiodense concretions had a histological and microbiological diagnosis of sinus aspergillosis. The sinus concretions had CT densities higher than 2000 HU (Housfield units) in 15 patients and lower than 2000 HU in 6. Fourteen of 15 patients (93.3%) with concretions ahving CT densities higher than 2000 HU had a postoperative diagnosis of maxillary sinus aspergillosis. The mean CT density of the sinus concretions in patients with maxillary sinus aspergillosis was 2868 HU (range 1870-3070 HU), and in patients without aspergiollosis was 778 HU (range 228-2644 HU). The mean CT density of the dental root-filling material was 2866 HU (range 2156-3070 HU). Paranasal sinus CT with CT densitometry of a sinus concretion has a higher accuracy than standard radiogrpahy and clinical findings in the prediction of maxillary sinus aspergillosis (93.3% vs 71.4%). CT densitometry helps to confirm the dental origin of maxillary sinus concretions and to explain a possible dental pathogenesis of maxillary sinus aspergillosis. (orig.)

Relación entre los niveles de flexibilidad de la cadena muscular posterior y lesiones músculo tendinosas en jugadores de rugby

OpenAIRE

Alessio, Germán

2015-01-01

La práctica de rugby produce posturas hipertónicas que traen como consecuencia un acortamiento de los músculos de la cadena posterior, lo que lleva aparejado una reducción de la flexibilidad. Objetivo: Establecer la relación entre los niveles de flexibilidad de la cadena muscular posterior con la cantidad de lesiones músculo-tendinosas en jugadores de rugby. Material y Métodos: La investigación es no experimental, transversal y descriptiva. Se evalúo la flexibilidad a través de un cajón...

An Analysis of Maxillary Anterior Teeth Dimensions for the Existence of Golden Proportion: Clinical Study.

Science.gov (United States)

Sandeep, Nalla; Satwalekar, Parth; Srinivas, Siva; Reddy, Chandra Sekhar; Reddy, G Ramaswamy; Reddy, B Anantha

2015-09-01

Appearance of the face is a great concern to everyone, as it is a significant part of self-image. The study analyzed the clinical crown dimensions of the maxillary anterior teeth with respect to their apparent mesiodistal widths, width-to-height ratio to determine whether golden proportion existed among the South Indian population. A total of 240 dentulous subjects were chosen for the study (120 males and 120 females) age ranging between 18 and 28 years. Full face and anterior teeth images of the subjects were made on specially designed device resembling a face-bow, mounted onto the wall under a standard light source. The width and height of the maxillary central incisors were measured on the stone casts using a digital caliper. The mean perceived maxillary lateral incisor to central incisor width ratio was 0.67 in males and 0.703 in females. The mean perceived maxillary canine to lateral incisor width ratio was 0.744 in males and 0.714 in females. The mean width-to-height ratio of the maxillary central incisor was 79.49% in males and 79.197% in females. The golden proportion was not found between perceived mesiodistal widths of maxillary central and lateral incisors and nor between perceived mesiodistal widths of maxillary lateral incisors and canines. In the majority of subjects, the width-to-height ratio of maxillary central incisor was within 75-80%. There are no statistically significant differences in maxillary anterior teeth proportions between males and females. The results may serve as guidelines for treatment planning in restorative dentistry and periodontal surgery.

Quantitative CBCT evaluation of maxillary and mandibular cortical bone thickness and density variability for orthodontic miniplate placement.

Science.gov (United States)

Rossi, Margherita; Bruno, Giovanni; De Stefani, Alberto; Perri, Alessandro; Gracco, Antonio

2017-12-01

To assess whether cortical bone thickness and density vary in relation to age, sex and skeletal pattern at the maxillary and mandibular areas suitable for miniplates placement for orthodontic purposes. CBCT of 92 subjects (42 males and 50 females) with skeletal class I, II or III malocclusion, divided between adolescents and adults, were examined. InVivoDental ® software (Anatomage Inc, USA) was used to measure 34 maxillary areas and 40 mandibular areas per side. Values obtained were then compared between the groups of subjects. Statistical analysis was performed using the non-parametric Wilcoxon-Mann-Whitney rank-sum test for independent samples. No significant differences were found in the cortical bone thickness values between the three skeletal patterns, and according to sex and age. Both maxilla and mandible showed an increase in cortical bone thickness from the anterior towards the posterior regions, and from the alveolar boneto the basal bone. Cortical bone density significantly varied in relation to the subject's age, with adults always showing higher values. Slight clinically significant differences were found between the three skeletal patterns and sex. In terms of cortical bone thickness, age, sex and skeletal pattern do not represent valid decision criteria for the evaluation of the best insertion areas for miniplates, while in terms of cortical bone density, only age is useful as a decision criterion. Copyright © 2017 CEO. Published by Elsevier Masson SAS. All rights reserved.

[Effects of maxillary distraction osteogenesis on the velopharyngeal configuration of cleft palate patients].

Science.gov (United States)

Wang, Xiao-xia; Wang, Xing; Yi, Biao; Li, Zi-li; Liang, Cheng

2005-12-18

To study the effects of internal maxillary distraction osteogenesis(DO) on the velopharyngeal configuration of cleft palate patients. Ten patients with severe maxillary hypoplasia secondary to cleft lip and palate patients (7 males and 3 females, average age 20.1 years old) had undertaken high step LeFort I osteotomy, and internal maxillary distraction devices were applied to advance the maxilla. Before surgery, when DO was completed and 6 months after DO was completed, oriented lateral cephalograms at rest position of each patient were taken, and 6 measure indexes of velopharyngeal configuration were collected and analyzed. All patients had successfully accomplished maxillary DO and the maxilla had been averagely advanced 11.3 mm. PNS-PhW, C-PhW, UL and ANS-PNS-T had all significantly increased, and UD had significantly decreased when DO was completed and 6 months after DO was completed as compared with pre-surgery. No significant linear correlation was found between maxilla advancement distance and velopharyngeal configuration changes. Correction of maxillary hypoplasia secondary to cleft palate surgery by using internal maxillary DO can increase the velopharyngeal cavity depth, and may impair velopharyngeal competence, but the compensatory changes of velopharyngeal soft tissue can alleviate this impairment to certain extent.

Three dimensional analysis of CT image on naso-maxillary complex in cleft lip and palate patients

International Nuclear Information System (INIS)

Ma, Rong-Rong

1994-01-01

This study was designed to clarify the three dimensional features of naso-maxillary complex in cleft lip and palate (CLP) by using computed tomography (CT) and to examine its change following an upper dental arch expansion. Sequential CT images with 2mm-thickness were obtained for 11 unilateral CLP boys (UCLP), 6 bilateral CLP boys (BCLP) and 4 boys without cleft (non-cleft). Additionally, two serial sets of upper dental cast before and after dental arch expansion coupled with CT images in UCLP were used to evaluate the effect of dental arch expansion on the naso-maxillary complex. UCLP demonstrated a remarkable naso-maxillary deformity characterized by a decreased volume of maxillary sinus in comparison with the non-cleft patients. Both the volume and shape of nasal cavity were significantly different between the cleft and non cleft side. Naso-maxillary morphology of BCLP, however, was similar to that of the non cleft except for the decreased volume of alveolar arch. Comparative study of UCLP and BCLP showed a significant difference in naso-maxillary morphology. There were some significant correlations between the dental arch expansion and change of each naso-maxillary component, suggesting the effect of expansion stress on the naso-maxillary complex in UCLP. However, deformation caused by expansion stress varied, depending on each component of the naso-maxillary complex. (author) 61 refs

Three dimensional analysis of CT image on naso-maxillary complex in cleft lip and palate patients

Energy Technology Data Exchange (ETDEWEB)

Ma, Rong-Rong [Tokyo Medical and Dental Univ. (Japan). School of Dentistry

1994-12-01

This study was designed to clarify the three dimensional features of naso-maxillary complex in cleft lip and palate (CLP) by using computed tomography (CT) and to examine its change following an upper dental arch expansion. Sequential CT images with 2mm-thickness were obtained for 11 unilateral CLP boys (UCLP), 6 bilateral CLP boys (BCLP) and 4 boys without cleft (non-cleft). Additionally, two serial sets of upper dental cast before and after dental arch expansion coupled with CT images in UCLP were used to evaluate the effect of dental arch expansion on the naso-maxillary complex. UCLP demonstrated a remarkable naso-maxillary deformity characterized by a decreased volume of maxillary sinus in comparison with the non-cleft patients. Both the volume and shape of nasal cavity were significantly different between the cleft and non cleft side. Naso-maxillary morphology of BCLP, however, was similar to that of the non cleft except for the decreased volume of alveolar arch. Comparative study of UCLP and BCLP showed a significant difference in naso-maxillary morphology. There were some significant correlations between the dental arch expansion and change of each naso-maxillary component, suggesting the effect of expansion stress on the naso-maxillary complex in UCLP. However, deformation caused by expansion stress varied, depending on each component of the naso-maxillary complex. (author) 61 refs.

Unusal canal configuration in maxillary and mandibular second molars

Directory of Open Access Journals (Sweden)

Ramachandran Ragunathan

2016-01-01

Full Text Available This clinical article describes three different case reports of maxillary and mandibular second molars with the unusual anatomy of single root with a single canal and their endodontic management. An unusual case of bilateralism is observed in the first two cases in the form of single-rooted second mandibular molars in both the quadrant of the same patient. The presence of maxillary second molar with single root and single canal in the third case is unusual.

Five years experience with a new intraoral maxillary distraction device (RID).

Science.gov (United States)

Picard, Arnaud; Diner, Patrick A; Galliani, Eva; Tomat, Catherine; Vazquez, Ma rie Paule; Carls, Friedrich P

2011-10-01

Maxillary distraction osteogenesis is well established for the treatment of severe retromaxilla. We report our experience since 2004 of the treatment of 19 patients using a new intraoral maxillary distraction device. Maxillary advancement was successful in all patients with mean advancement of 9.6mm (range 4-17) measured at a point in lateral cephalograms. The new device limited surgical exposure and the amount of materials implanted, and improved control in every phase of the distraction. It was psychologically accepted by patients and was more comfortable than existing devices. Copyright © 2010 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Dental anomalies in an orthodontic patient population with maxillary lateral incisor agenesis.

Science.gov (United States)

Citak, Mehmet; Cakici, Elif Bahar; Benkli, Yasin Atakan; Cakici, Fatih; Bektas, Bircan; Buyuk, Suleyman Kutalmış

2016-01-01

The purpose of this study was to evaluate the prevalence of dental anomalies in a subpopulation of orthodontic patients with agenesis of maxillary lateral incisors (MLI). The material of the present study included the records of the 1964 orthodontic patients. Panoramic radiographs and dental casts were used to analyze other associated eight dental anomalies, including agenesis of other teeth, dens invaginatus, dens evaginatus, peg shaped MLI, taurodontism, pulp stone, root dilaceration and maxillary canine impaction. Out of the 1964 patients examined, 90 were found to have agenesis of MLI, representing a prevalence of 4.6%. The most commonly found associated-anomalies were agenesis of other teeth (23.3%), peg-shaped MLIs (15.6%), taurodontism (42.2%), and dilacerated teeth (18.9%). Permanent tooth agenesis, taurodontism, peg-shaped maxillary lateral incisor, and root dilacerations are frequently associated with maxillary lateral incisor agenesis.

The mean visible labial length of maxillary and mandibular anterior teeth at rest

International Nuclear Information System (INIS)

Khan, F.; Abbas, M.

2014-01-01

To determine the mean visible labial length of maxillary and mandibular anterior teeth at rest. Study Design: Cross-sectional study. Place and Duration of Study: Department of Prosthodontics, Dr. Ishrat-ul-Ebad Khan Institute of Oral Health Sciences, Karachi, from October 2012 to March 2013. Methodology: A total of 200 subjects were included. Measurements were carried out using digital caliper from the border of the lip to the incisal edges of incisor and to the cusp tip for the canines. The length of the upper lip was measured from subnasale to stomion. Statistical analyses were performed by Mann Whitney-U test and Kruskal Walli's test. Results: The age of the participant ranged between 20 and 65 years. At rest, females significantly displayed more of the maxillary central incisor (2.93 +- 1.57 mm; p=0.003), lateral incisor (1.87 +- 1.12 mm; p=0.005) and canine (0.59 +- 0.62 mm; p=0.031). With increasing age, the amount of maxillary anterior teeth visible at rest significantly decreased (p < 0.001), and increased for the mandibular teeth (p < 0.001). Subjects with shorter upper lips significantly displayed more maxillary anterior incisor structure than subjects with longer upper lip (p < 0.001). Conclusion: Females displayed significantly more labial length of the maxillary anterior teeth. The mean visible labial length of maxillary anterior teeth significantly decreased with increasing age and increased for the mandibular teeth. As the upper lip length increased, the mean visible labial length of maxillary anterior teeth significantly decreased. (author)

Maxillary complete denture outcome with two-implant supported mandibular overdentures. A systematic review.

Science.gov (United States)

Rutkunas, Vygandas; Mizutani, Hiroshi; Peciuliene, Vytaute; Bendinskaite, Ruta; Linkevicius, Tomas

2008-01-01

Research data regarding maxillary complete denture outcome with two-implant supported mandibular overdentures are not consistent. Considering multiple publications on implant supported mandibular overdentures, it was decided to summarize currently present evidence on the maxillary complete dentures opposed by implant-supported mandibular overdentures, and analyze factors that could potentially influence the outcomes. The articles from 1985 to 2007 related to the topic were identified in the online MEDLINE/Pubmed and other databases and manually. Primary articles were scanned, and irrelevant studies were excluded from the further review process. Potentially relevant titles and abstracts were provisionally included for consideration on the basis of full text articles. Full text articles were obtained from on-line and printed sources. The data from the studies were extracted and reviewed. The study has failed to identify any prospective satisfying inclusion/exclusion criteria RCT reporting on maxillary bone resorption. The number of maxillary complete denture relining incidences per patient was constantly increasing during the 10-year period. Maxillary complete denture remake incidences comprised 16-33 % of the number of patients followed during the 10-year period. Comparing patient satisfaction with upper dentures at the baseline and after two years, no decrease in satisfaction was noticed. There is no evidence that maxillary ridge resorption is accelerated with certain types of two-implant supported mandibular overdenture attachments. Most common complication for the maxilla - prosthetic maintenance. There is a risk of decreased patient satisfaction with bar-supported mandibular overdenture. Further studies are needed to provide evidence for the maxillary complete denture outcome with two-implant supported mandibular overdentures.

Anatomy and classification of the posterior tibial fragment in ankle fractures.

Science.gov (United States)

Bartoníček, Jan; Rammelt, Stefan; Kostlivý, Karel; Vaněček, Václav; Klika, Daniel; Trešl, Ivo

2015-04-01

The aim of this study was to analyze the pathoanatomy of the posterior fragment on the basis of a comprehensive CT examination, including 3D reconstructions, in a large patient cohort. One hundred and forty one consecutive individuals with an ankle fracture or fracture-dislocation of types Weber B or Weber C and evidence of a posterior tibial fragment in standard radiographs were included in the study. The mean patient age was 49 years (range 19-83 years). The exclusion criteria were patients below 18 years of age, inability to provide written consent, fractures of the tibial pilon, posttraumatic arthritis and pre-existing deformities. In all patients, post-injury radiographs were obtained in anteroposterior, mortise and lateral views. All patients underwent CT scanning in transverse, sagittal and frontal planes. 3D CT reconstruction was performed in 91 patients. We were able to classify 137 cases into one of the following four types with constant pathoanatomic features: type 1: extraincisural fragment with an intact fibular notch, type 2: posterolateral fragment extending into the fibular notch, type 3: posteromedial two-part fragment involving the medial malleolus, type 4: large posterolateral triangular fragment. In the 4 cases it was not possible to classify the type of the posterior tibial fragment. These were collectively termed type 5 (irregular, osteoporotic fragments). It is impossible to assess the shape and size of the posterior malleolar fragment, involvement of the fibular notch, or the medial malleolus, on the basis of plain radiographs. The system that we propose for classification of fractures of the posterior malleolus is based on CT examination and takes into account the size, shape and location of the fragment, stability of the tibio-talar joint and the integrity of the fibular notch. It may be a useful indication for surgery and defining the most useful approach to these injuries.

Maxillary anterior segmental distraction osteogenesis with 2 different types of distractors.

Science.gov (United States)

Choi, Hye-Young; Hwang, Chung-Ju; Kim, Hee-Jin; Yu, Hyung-Seog; Cha, Jung-Yul

2012-05-01

Maxillary anterior segmental distraction osteogenesis (DO) has been the alternative treatment option for patients with midfacial retrusion. To investigate a potentially more effective maxillary anterior segmental DO, a newly designed intraoral alveolar distractor was applied. The objectives of this study were to investigate the skeletal and dental effects of maxillary anterior segmental DO and the relapse pattern. The study was carried out for 8 patients with unilateral cleft lip and palate (mean age, 16 years 7 months). Four patients were treated with an intraoral appliance (IA), and the remaining with a rigid external distractor (RED). Dental and skeletal measurements were obtained for both groups. These measurements were compared for different time points including pre-DO (T1), post-DO (T2), postconsolidation (T3), and 1-year follow-up (T4). Horizontal change of A point was significantly larger after distraction period (T2) in the RED group (mean, 11.0 mm; median, 10.1 mm) than in the IA group (mean, 6.6 mm; median, 7.4 mm) (P distraction, showing a significant difference between groups (P Maxillary anterior segmental DO is effective for the treatment of patients with cleft lip and palate. The alveolar space is regained, and the facial profile is improved without velopharyngeal problems. Superior results are obtained using the RED appliance for maxillary anterior segmental DO relative to the use of the intraoral distractor appliance.

Role of Modified Endoscopic Medial Maxillectomy in Persistent Chronic Maxillary Sinusitis

Science.gov (United States)

Thulasidas, Ponnaiah; Vaidyanathan, Venkatraman

2014-01-01

Introduction Functional endoscopic sinus surgery has a long-term high rate of success for symptomatic improvement in patients with medically refractory chronic rhinosinusitis. As the popularity of the technique continues to grow, however, so does the population of patients with postsurgical persistent sinus disease, especially in those with a large window for ventilation and drainage. In addition, chronic infections of the sinuses especially fungal sinusitis have a higher incidence of recurrence even though a wide maxillary ostium had been performed earlier. This subset of patients often represents a challenge to the otorhinolaryngologist. Objectives To identify the patients with chronic recalcitrant maxillary sinusitis and devise treatment protocols for this subset of patients. Methods A retrospective review was done of all patients with persistent maxillary sinus disease who had undergone modified endoscopic medial maxillectomy between 2009 and 2012. We studied patient demographics, previous surgical history, and follow-up details and categorized the types of endoscopic medial maxillectomies performed in different disease situations. Results We performed modified endoscopic medial maxillectomies in 37 maxillary sinuses of 24 patients. The average age was 43.83 years. Average follow-up was 14.58 months. All patients had good disease control in postoperative visits with no clinical evidence of recurrences. Conclusion Modified endoscopic medial maxillectomy appears to be an effective surgery for treatment of chronic, recalcitrant maxillary sinusitis. PMID:25992084

Role of Modified Endoscopic Medial Maxillectomy in Persistent Chronic Maxillary Sinusitis

Directory of Open Access Journals (Sweden)

Thulasidas, Ponnaiah

2014-02-01

Full Text Available Introduction Functional endoscopic sinus surgery has a long-term high rate of success for symptomatic improvement in patients with medically refractory chronic rhinosinusitis. As the popularity of the technique continues to grow, however, so does the population of patients with postsurgical persistent sinus disease, especially in those with a large window for ventilation and drainage. In addition, chronic infections of the sinuses especially fungal sinusitis have a higher incidence of recurrence even though a wide maxillary ostium had been performed earlier. This subset of patients often represents a challenge to the otorhinolaryngologist. Objectives To identify the patients with chronic recalcitrant maxillary sinusitis and devise treatment protocols for this subset of patients. Methods A retrospective review was done of all patients with persistent maxillary sinus disease who had undergone modified endoscopic medial maxillectomy between 2009 and 2012. We studied patient demographics, previous surgical history, and follow-up details and categorized the types of endoscopic medial maxillectomies performed in different disease situations. Results We performed modified endoscopic medial maxillectomies in 37 maxillary sinuses of 24 patients. The average age was 43.83 years. Average follow-up was 14.58 months. All patients had good disease control in postoperative visits with no clinical evidence of recurrences. Conclusion Modified endoscopic medial maxillectomy appears to be an effective surgery for treatment of chronic, recalcitrant maxillary sinusitis.

Maxillary segmental distraction in children with unilateral clefts of lip, palate, and alveolus.

Science.gov (United States)

Zemann, Wolfgang; Pichelmayer, Margit

2011-06-01

Alveolar clefts are commonly closed by a bone grafting procedure. In cases of wide clefts the deficiency of soft tissue in the cleft area may lead to wound dehiscence and loss of the bony graft. Segmental maxillary bony transfer has been mentioned to be useful in such cases. Standard distraction devices allow unidirectional movement of the transported segment. Ideally the distraction should strictly follow the dental arch. The aim of this study was to analyze distraction devices that were adapted to the individual clinical situation of the patients. The goal was to achieve a distraction strictly parallel to the dental arch. Six children with unilateral clefts of lip, palate, and alveolus between 12 and 13 years of age were included in the study. The width of the cleft was between 7 and 19 mm. Dental cast models were used to manufacture individual distraction devices that should allow a segmental bony transport strictly parallel to the dental arch. Segmental osteotomy was performed under general anesthesia. Distraction was started 5 days after surgery. All distracters were tooth fixed but supported by palatal inserted orthodontic miniscrews. In all patients, a closure of the alveolar cleft was achieved. Two patients required additional bone grafting after the distraction procedure. The distraction was strictly parallel to the dental arch in all cases. In 1 case a slight cranial displacement of the transported maxillary segment could be noticed, leading to minor modifications of the following distractors. Distraction osteogenesis is a proper method to close wide alveolar clefts. Linear segmental transport is required in the posterior part of the dental arch, whereas in the frontal part the bony transport should run strictly parallel to the dental arch. An exact guided segmental transport may reduce the postoperative orthodontic complexity. Copyright © 2011 Mosby, Inc. All rights reserved.

Reliability of Baropodometry on the Evaluation of Plantar Load Distribution: A Transversal Study.

Science.gov (United States)

Baumfeld, Daniel; Baumfeld, Tiago; da Rocha, Romário Lopes; Macedo, Benjamim; Raduan, Fernando; Zambelli, Roberto; Alves Silva, Thiago Alexandre; Nery, Caio

2017-01-01

Introduction . Baropodometry is used to measure the load distribution on feet during rest and walking. The aim of this study was to evaluate changes in plantar foot pressures distribution due to period of working and due to stretching exercises of the posterior muscular chain. Methods . In this transversal study, all participants were submitted to baropodometric evaluation at two different times: before and after the working period and before and after stretching the muscles of the posterior chain. Results . We analyzed a total of 54 feet of 27 participants. After the working period, there was an average increase in the forefoot pressure of 0.16 Kgf/cm 2 and an average decrease in the hindfoot pressure of 0.17 Kgf/cm 2 . After stretching the posterior muscular chain, the average increase in the forefoot pressure was 0.56 Kgf/cm 2 and the hindfoot average pressure decrease was 0.56 Kgf/cm 2 . These changes were not statistically significant. Discussion . It was reported that the strength of the Achilles tendon generates greater forefoot load transferred from the hindfoot. In our study, no significant variation in the distribution of plantar pressure was observed. It can be inferred that baropodometry was a reliable instrument to determine the plantar pressure, regardless of the tension of the posterior chain muscles.

Evaluation the success of osseointegrated implants in maxillary sinus grafts

Directory of Open Access Journals (Sweden)

Rubens Eduardo Gigli

2008-01-01

Full Text Available Objective: To analyze implants placed in maxillary sinus grafts with biomaterial of bovine origin and platelet-rich plasma, observing bone neoformation and the clinical and histologic success rate presented.Methods: Analysis of the clinical findings was based on 36 maxillary sinus grafts with 101 implants placed in 30 patients with a mean age of 47 years, and the histologic analysis, based on nine samples of the 36 grafts performed, with a mean interval of 7.5 months time of the graft, the majority of patients being men with a mean age of 42 years. Results: Clinically, 91 implants placed were osseointegrated.Conclusion: Based on the results presented, it was concluded that when implants are placed in the maxillary sinus region grafted with biomaterial, they present a high success rate. ISRCTN24003246

Prevalence and distribution of dental anomalies: a comparison between maxillary and mandibular tooth agenesis.

Science.gov (United States)

Al-Abdallah, Mariam; AlHadidi, Abeer; Hammad, Mohammad; Al-Ahmad, Hazem; Saleh, Raja'

2015-11-01

The aim of this study was to compare the pattern and prevalence of associated dental anomalies between maxillary and mandibular tooth agenesis (hypodontia). A sample of 3315 dental patients, aged 8.6 to 25.4 years, was surveyed for tooth agenesis (excluding third molars): 106 subjects were diagnosed with maxillary hypodontia (group 1) and 70 with mandibular hypodontia (group 2). Both groups were examined for the following dental anomalies: retained deciduous molars, infraocclusion of deciduous molars, impaction, microdontia of maxillary lateral incisors, supernumerary teeth, transposition, transmigration, and ectopic eruption of the permanent molars. For statistical testing, the chi-square test (P anomalies among the groups. We found that 77.5% of the patients in the mandibular hypodontia group had at least 1 dental anomaly compared with 49.5% in the maxillary hypodontia group (P dental anomaly with a significantly increased prevalence in the maxillary hypodontia group compared with the mandibular hypodontia group was microdontia of the maxillary lateral incisors (groups 1, 46.7%; group 2, 12.9%; P dental development in both jaws. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

An unusual salvage technique for posterior tracheal membranous laceration associated with transhiatal esophagectomy: A transcervical–transsternal approach

Directory of Open Access Journals (Sweden)

Seyed Ziaeddin Rasihashemi

2017-09-01

Full Text Available Various surgical approaches may be employed for esophageal resection. Major airway injuries due to transhiatal esophagectomy include vertical tears in the membranous trachea. Tracheal injury is an uncommon but potentially fatal complication. This article describes the technique to repair the posterior membranous tracheal tear, extended just over the carina through a transcervical–transsternal approach, thereby avoiding a second thoracotomy. Six patients with posterior membranous tracheal injury underwent this procedure. The laceration ranged from 3 cm to 5 cm in length. Four patients had received neoadjuvant chemoradiation. The management of tracheal laceration added approximately 60 minutes to the total operation time. There was no mortality related to tracheal injury. Patients were followed up for 6 months after surgery, and both posterior tracheal wall and transverse tracheotomy remained intact without stenosis. The transcervical–transsternal approach decreases the need of thoracotomy and its complications in patients with tracheal laceration in any stage, even in cases of an extended tear down to the carina.

Group Distal Movement of Teeth using Micro-Screw-Implant Anchorage-A Case Report.

Science.gov (United States)

Kalarickal, Biju

2014-05-01

This case report describes a case of orthodontic tooth movement of a 29-year-old female patient utilizing maxillary posterior edentulous area. Micro-implants were placed at buccal edentulous spaces and inter-radicular space for retraction of entire maxillary dentition. An overjet reduction of 8mm and good posterior occlusion were achieved.

The transverse musculo-cutaneous gracilis flap for breast reconstruction: How to avoid complications.

Science.gov (United States)

Bodin, Frédéric; Dissaux, Caroline; Dupret-Bories, Agnes; Schohn, Thomas; Fiquet, Caroline; Bruant-Rodier, Catherine

2016-01-01

The transverse musculocutaneous gracilis (TMG) flap has become a common solution for breast reconstruction. However, the safe skin paddle limits are not yet understood. In this study, we attempted to address this issue based on our experiences with inferior and posterior skin paddle extension. Forty-four breast reconstructions with TMG flaps performed between November 2010 and January 2014 were analyzed retrospectively. For the first 20 cases, the flap skin paddle was extended 3 cm posteriorly to the middle thigh (group 1). For the next 20 flaps (group 2), the posterior tip was limited to this line, whereas more fat was recruited inferiorly. In the four cases of group 3, the skin flap was extended posteriorly with a second vascular pedicle from the profunda artery perforator (PAP) flap. The weights and the dimensions of the flaps, operating durations, and postoperative complications of the entire series were analyzed. Groups 1 and 2 were statistically compared. Flap complications were statistically more frequent in group 1 compared with group 2 (45 vs. 0%, P = 0.0012); 40% posterior flap tip necrosis was observed in group 1. Conversely, donor site complications were statistically more frequent in group 2 than in group 1 (40 vs. 5%, P = 0.019) with 35% inner thigh dehiscence. In the TMG with extended PAP flap group, the operating duration was 77 min longer compared with the rest of the series with no donor site complications. In one case, limited necrosis occurred at the anterior skin tip. Harvesting the posterior portion of the TMG up to the middle of the posterior thigh may lead to partial flap necrosis. Extending subcutaneous fat removal under the inferior skin incision may increase the risk of donor site complications. Adding a second vascular pedicle from the PAP flap may improve posterior TMG tip perfusion at the expense of a longer operation. © 2015 Wiley Periodicals, Inc.

Orthodontic Treatment of Maxillary Incisors with Severe Root Resorption Caused by Bilateral Canine Impaction in a Class II Division 1 Patient.

Science.gov (United States)

Chang, Na-Young; Park, Jae Hyun; Lee, Mi-Young; Cho, Jin-Woo; Cho, Jin-Hyoung; An, Ki-Yong; Chae, Jong-Moon

2016-01-01

This case report shows the successful alignment of bilateral impacted maxillary canines. A 12-year-old male with the chief complaint of the protrusion of his maxillary anterior teeth happened to have bilateral maxillary canine impaction on the labial side of his maxillary incisors. Four maxillary incisors showed severe root resorption because of the impacted canines. The patient was diagnosed as skeletal Class II malocclusion with proclined maxillary incisors. The impacted canine was carefully retracted using sectional buccal arch wires to avoid further root resorption of the maxillary incisors. To distalize the maxillary dentition, two palatal miniscrews were used. After 25 months of treatment, the maxillary canines were well aligned without any additional root resorption of the maxillary incisors.

Use of anterior maxillary distraction osteogenesis in two cleft lip and palate patients

Science.gov (United States)

Srivastava, Dhirendra; Ghassemi, Alireza; Ghassemi, Mehrangiz; Showkatbakhsh, Rahman; Jamilian, Abdolreza

2015-01-01

Distraction osteogenesis (DO) has become a mainstream surgical technique for patients with jaw deformities. The aim of this study was to report the effect of DO done by a hyrax screw incorporated in an acrylic plate in the treatment of two maxillary deficient cases with cleft lip and palate. Two patients, a 24-year-old female and a 29-year-old male who suffered from maxillary deficiency and cleft lip and palate, were treated by DO. After making vertical cuts between the premolars on both sides and horizontal cuts similar to Le Fort 1, a hyrax screw was mounted on an acrylic plate for the slow anteroposterior expansion of maxillary arch. The expansion was achieved by turning the hyrax screw 0.8 mm per day after the latency period. Treatment was discontinued after achieving satisfactory over jet and occlusion. This study showed that anterior maxillary distraction is a reliable technique for correction of midfacial deformity arising out of cleft lip and palate. Incidences of complications are negligible compared to total maxillary distraction. PMID:26668459

Use of anterior maxillary distraction osteogenesis in two cleft lip and palate patients.

Science.gov (United States)

Srivastava, Dhirendra; Ghassemi, Alireza; Ghassemi, Mehrangiz; Showkatbakhsh, Rahman; Jamilian, Abdolreza

2015-01-01

Distraction osteogenesis (DO) has become a mainstream surgical technique for patients with jaw deformities. The aim of this study was to report the effect of DO done by a hyrax screw incorporated in an acrylic plate in the treatment of two maxillary deficient cases with cleft lip and palate. Two patients, a 24-year-old female and a 29-year-old male who suffered from maxillary deficiency and cleft lip and palate, were treated by DO. After making vertical cuts between the premolars on both sides and horizontal cuts similar to Le Fort 1, a hyrax screw was mounted on an acrylic plate for the slow anteroposterior expansion of maxillary arch. The expansion was achieved by turning the hyrax screw 0.8 mm per day after the latency period. Treatment was discontinued after achieving satisfactory over jet and occlusion. This study showed that anterior maxillary distraction is a reliable technique for correction of midfacial deformity arising out of cleft lip and palate. Incidences of complications are negligible compared to total maxillary distraction.

C-shaped root canal in a maxillary first molar: a case report.

Science.gov (United States)

Yilmaz, Z; Tuncel, B; Serper, A; Calt, S

2006-02-01

This case report presents an unusual C-shaped root canal system in a maxillary first molar tooth. Although C-shaped root canals are most frequently seen in the mandibular second molar, they may also appear in maxillary molars. A literature search revealed only a few case reports of C-shaped root canal systems in maxillary molars. The present case describes a C-shaped canal in the buccal root of a maxillary first molar. The endodontic access cavity displayed two canal orifices, one leading to the canal system in the buccal root, the other into the palatal root canal system. In the buccal root, what appeared to be the mesial and distal canals joined to form a single C-shaped canal. --Careful examination of radiographs and the internal anatomy of teeth is essential.-- The location and morphology of root canals should be identified at high magnification under the microscope.

Root Canal Configuration of Maxillary First Permanent Molars in an Iranian Population

Directory of Open Access Journals (Sweden)

Saeed Rahimi

2007-06-01

Full Text Available

Background and aims. It is critical to have a proper knowledge of the normal anatomy of the pulp and its variations for the success of endodontic treatment. The purpose of this study was to investigate variations in the root canal system of maxillary first permanent molars in an Iranian population.

Materials and methods. In this study, 137 maxillary first molars were decalcified, dye-injected, cleared and studied.

Results. The results demonstrated that 37.96% of the maxillary first molars under study had three canals, 58.4% had four canals and 3.64% had five canals.

Conclusion. According to the results of this study and considering variations in the root canal systems of maxillary first molars, it seems that great care should be taken in the root canal treatment of these teeth.

Paradigm Shift in the Management of the Atrophic Posterior Maxilla

Directory of Open Access Journals (Sweden)

Rabah Nedir

2014-01-01

Full Text Available When the posterior maxilla is atrophic, the reference standard of care would be to perform sinus augmentation with an autologous bone graft through the lateral approach and delayed implant placement. However, placement of short implants with the osteotome sinus floor elevation technique and without graft can be proposed for an efficient treatment of clinical cases with a maxillary residual bone height of 4 to 8 mm. The use of grafting material is recommended only when the residual bone height is ≤4 mm. Indications of the lateral sinus floor elevation are limited to cases with a residual bone height ≤ 2 mm and fused corticals, uncompleted healing of the edentulous site, and absence of flat cortical bone crest or when the patient wishes to wear a removable prosthesis during the healing period. The presented case report illustrates osteotome sinus floor elevation with and without grafting and simultaneous implant placement in extreme conditions: atrophic maxilla, short implant placement, reduced healing time, and single crown rehabilitation. After 6 years, all placed implants were functional with an endosinus bone gain.

Dual odontogenic origins develop at the early stage of rat maxillary incisor development.

Science.gov (United States)

Kriangkrai, Rungarun; Iseki, Sachiko; Eto, Kazuhiro; Chareonvit, Suconta

2006-03-01

Developmental process of rat maxillary incisor has been studied through histological analysis and investigation of tooth-related gene expression patterns at initial tooth development. The tooth-related genes studied here are fibroblast growth factor-8 (Fgf-8), pituitary homeobox gene-2 (Pitx-2), sonic hedgehog (Shh), muscle segment homeobox-1 (Msx-1), paired box-9 (Pax-9) and bone morphogenetic protein-4 (Bmp-4). The genes are expressed in oral epithelium and/or ectomesenchyme at the stage of epithelial thickening to the early bud stage of tooth development. Both the histological observation and tooth-related gene expression patterns during early stage of maxillary incisor development demonstrate that dual odontogenic origins aligned medio-laterally in the medial nasal process develop, subsequently only single functional maxillary incisor dental placode forms. The cascade of tooth-related gene expression patterns in rat maxillary incisor studied here is quite similar to those of the previous studies in mouse mandibular molar, even though the origins of oral epithelium and ectomesenchyme involved in development of maxillary incisor and mandibular molar are different. Thus, we conclude that maxillary incisor and mandibular molar share a similar signaling control of Fgf-8, Pitx-2, Shh, Msx-1, Pax-9 and Bmp-4 genes at the stage of oral epithelial thickening to the early bud stage of tooth development.

Anatomical Variation of the Maxillary Sinus in Cone Beam Computed Tomography

Directory of Open Access Journals (Sweden)

Marcelo Lupion Poleti

2014-01-01

Full Text Available Purpose. The aim of this paper is to report a case in which the cone beam computed tomography (CBCT was important for the confirmation of the presence of maxillary sinus septum and, therefore, the absence of a suspected pathologic process. Case Description. A 27-year-old male patient was referred for the assessment of a panoramic radiograph displaying a radiolucent area with radiopaque border located in the apical region of the left upper premolars. The provisional diagnosis was either anatomical variation of the maxillary sinuses or a bony lesion. Conclusion. The CBCT was important for an accurate assessment and further confirmation of the presence of maxillary septum, avoiding unnecessary surgical explorations.

Comparison of prostate contours between conventional stepping transverse imaging and Twister-based sagittal imaging in permanent interstitial prostate brachytherapy.

Science.gov (United States)

Kawakami, Shogo; Ishiyama, Hiromichi; Satoh, Takefumi; Tsumura, Hideyasu; Sekiguchi, Akane; Takenaka, Kouji; Tabata, Ken-Ichi; Iwamura, Masatsugu; Hayakawa, Kazushige

2017-08-01

To compare prostate contours on conventional stepping transverse image acquisitions with those on twister-based sagittal image acquisitions. Twenty prostate cancer patients who were planned to have permanent interstitial prostate brachytherapy were prospectively accrued. A transrectal ultrasonography probe was inserted, with the patient in lithotomy position. Transverse images were obtained with stepping movement of the transverse transducer. In the same patient, sagittal images were also obtained through rotation of the sagittal transducer using the "Twister" mode. The differences of prostate size among the two types of image acquisitions were compared. The relationships among the difference of the two types of image acquisitions, dose-volume histogram (DVH) parameters on the post-implant computed tomography (CT) analysis, as well as other factors were analyzed. The sagittal image acquisitions showed a larger prostate size compared to the transverse image acquisitions especially in the anterior-posterior (AP) direction ( p transverse image acquisitions was correlated to DVH parameters such as D 90 ( R = 0.518, p = 0.019), and V 100 ( R = 0.598, p = 0.005). There were small but significant differences in the prostate contours between the transverse and the sagittal planning image acquisitions. Furthermore, our study suggested that the differences between the two types of image acquisitions might correlated to dosimetric results on CT analysis.

上颌窦气化与上颌第一磨牙的相关性分析%The correlation between maxillary sinus aeration and maxillary molars: A CT image analysis

Institute of Scientific and Technical Information of China (English)

周泉生; 胡志; 孙大明; 刘成蛟; 李兴花

2017-01-01

AIM:To investigate the relationship between the aeration of maxillary sinus and maxillary molars.METHODS:The CT images of 50 patients with normal sinus(n =100) were analyzed retrospectively.The volume of maxillary sinus,the length of the first maxillary molar and its corresponding alveolar bone height and width were measured.The molars were divided into embedded and non-embedded types.The conelations between the molar length,the volume of maxillary sinus and the mass of alveolar bone were statistically analyzed.RESULTS:The average volume of maxillary sinus was (13.56 ± 5.63) mL,alveolar bone height and width were (11.35 ± 4.09) mm and (14.83 ± 1.56) mm respectively,the first molar length was (18.88 ± 2.69) mm.There was no correlation between the length of maxillary molars and the volume of maxillary sinus and alveolar bone mass (P ＞ 0.05).No difference of the molar length was found between the embedded and non-embedded molars (P ＞ 0.05).The volume of maxillary sinus in the embedded group was greater than that in the non-embedded group (P ＜0.05) and the alveolar bone mass in embedded group was less than that in the non-embedded group (P ＜ 0.05).CONCLUSION:The maxillary molar has no significant correlation with the volume of maxillary sinus and the alveolar bone mass.But for maxillary sinus with obvious aeration,the probability of molar protrusion into the maxillary sinus increases.%目的:探讨上颌窦气化与上颌第一磨牙的关系.方法:回顾性分析50例(100个上颌第一磨牙)副鼻窦CT检查正常的患者影像资料,测量上颌窦容积、上颌第一磨牙长度以及对应牙槽骨的高度和宽度;并将第一磨牙分为嵌入型和非嵌入型,分析两组间差异以及上颌第一磨牙长度与上颌窦容积、牙槽骨骨量的相关性.结果:50例(100个)正常上颌窦平均容积(13.56 5.63) mL,牙槽骨高度(11.35±4.09) mm,牙槽骨宽度(14.83±1.56)mm,第一磨牙长度(18.88 ±2.69) mm

Chronic Maxillary Sinusitis Associated with an Unusual Foreign Body: A Case Report

Directory of Open Access Journals (Sweden)

Yunus Feyyat Şahin

2012-01-01

Full Text Available Foreign bodies in maxillary sinuses are unusual clinical conditions, and they can cause chronic sinusitis by mucosal irritation. Most cases of foreign bodies in maxillary sinus are related to iatrogenic dental manipulation and only a few cases with non-dental origin are reported. Oroantral fistulas secondary to dental procedures are the most common way of insertion. Treatment is surgical removal of the foreign body either endoscopically or with a combined approach, with Caldwell-Luc procedure if endoscopic approach is inadequate for visualisation. In this case, we present a 24-year-old male patient with unilateral chronic maxillary sinusitis due to a wooden toothpick in left maxillary sinus. The patient had a history of upper second premolar tooth extraction. CT scan revealed sinus opacification with presence of a foreign body in left maxillary sinus extending from the floor of the sinus to the orbital base. The foreign body, a wooden toothpick, was removed with Caldwell-Luc procedure since it was impossible to remove the toothpick endoscopically. There was no obvious oroantral fistula in the time of surgery, but the position of the toothpick made us to think that it was inserted through a previously healed fistula, willingly or accidentally.

Maxillary distraction osteogenesis using Le Fort I osteotomy without intraoperative down-fracture.

Science.gov (United States)

Yamauchi, K; Mitsugi, M; Takahashi, T

2006-06-01

The aim of this study is to present a technique for maxillary distraction osteogenesis using Le Fort I osteotomy without down-fracture. Six cleft-related patients suffering from severe midfacial deficiency were treated with maxillary distraction osteogenesis. The RED II system was chosen as the extraoral device and the Leipzig retention plate system to anchor the maxillary segment. Maxillary distraction osteogenesis was successful in all cases. Cephalometric and clinical evaluation after an average follow-up period of 1 year showed stable results with respect to skeletal and dental relationships. The SNA angle increased from 72.3 degrees to 81.4 degrees and the ANB angle increased by 11.0 degrees immediately after removing the distraction device. After 1 year, the sagittal bone gain remained and the SNA angle had decreased by 0.8 degrees . This technique seems to minimize the risk of the surgical procedure and shorten the operation time. It may become an alternative method for the treatment of patients with severe midfacial hypoplasia.

Effective Maxillary Protraction with Tandem Traction Bow Appliance

Directory of Open Access Journals (Sweden)

Pravin Kumar S Marure

2014-01-01

Full Text Available Tandem traction bow appliance (TTBA promotes patient compliance, because it is more esthetic and comfortable than extraoral appliances. TTBA should be used only in case where maxillary deficiency and normal mandible is present. Advantages of it includes good oral hygiene, early treatment of any Class III malocclusion, optimal retention, distribution of the forces for protraction to all maxillary teeth, free mandibular movement. It can be used in conjunction with fixed appliances if necessary. This paper includes two case reports. The treatment results in both the cases demonstrated significant skeletal and dental response to TTBA therapy. Skeletal change was primarily a result of anterior movement of the maxilla.

Kinematic features of rear-foot motion using anterior and posterior ankle-foot orthoses in stroke patients with hemiplegic gait.

Science.gov (United States)

Chen, Chih-Chi; Hong, Wei-Hsien; Wang, Chin-Man; Chen, Chih-Kuang; Wu, Katie Pei-Hsuan; Kang, Chao-Fu; Tang, Simon F

2010-12-01

To evaluate the kinematic features of rear-foot motion during gait in hemiplegic stroke patients, using anterior ankle-foot orthoses (AFOs), posterior AFOs, and no orthotic assistance. Crossover design with randomization for the interventions. A rehabilitation center for adults with neurologic disorders. Patients with hemiplegia due to stroke (n=14) and able-bodied subjects (n=11). Subjects with hemiplegia were measured walking under 3 conditions with randomized sequences: (1) with an anterior AFO, (2) with a posterior AFO, and (3) without an AFO. Control subjects were measured walking without an AFO to provide a normative reference. Rear-foot kinematic change in the sagittal, coronal, and transverse planes. In the sagittal plane, compared with walking with an anterior AFO or without an AFO, the posterior AFO significantly decreased plantar flexion to neutral at initial heel contact (P=.001) and the swing phase (PRehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Maxillary sinus function after sinus lifts for the insertion of dental implants

NARCIS (Netherlands)

Timmenga, NM; Raghoebar, GM; Boering, G; VanWeissenbruch, R

Purpose: The influence of bone augmentation of the floor of the maxillary sinus for the insertion of denial implants on sinus function has not been well investigated, In this study, the influence of the sinus lift on the development of maxillary sinus pathology was evaluated using generally accepted

The microbiology of ethmoid and maxillary sinuses in patients with chronic sinusitis.

Science.gov (United States)

Aral, Murat; Keles, Erol; Kaygusuz, Irfan

2003-01-01

To investigate aerob-anaerob microorganisms growth in maxillary and ethmoid sinuses by evaluating aspiration materials from patients with chronic sinusitis. The study was performed prospectively, and there were 31 patients (23 men, 8 women; mean age, 31.4+/-14.15, between 18-65 years) who had endoscopic sinus surgery because of chronic sinusitis. During the operation, when the maxillary sinus ostium and ethmoid sinus were opened, readily aspirated materials from sinuses were evaluated regarding aerob and anaerob bacteria. Nose and throat swap samples were collected preoperatively to determine the upper respiratory tract flora and also to understand the relationship between the flora and the microorganisms aspirated from sinuses. Total aerob bacteria count, which was isolated from preoperative nasal swab cultures, was 36, and aerob-anaerob bacteria count that included cultures taken from maxillary and ethmoid sinuses during the functional endoscopic sinus surgery was 42. For each 2 samples, the most common isolated aerob bacteria were coagulase (-) staphylococci. Microorganisms were isolated in 87.0% of 27 patients, in which cultures taken from maxillary and ethmoid sinuses during the functional endoscopic sinus surgery were included. It is determined that the isolated aerob bacteria rate was 90.4%, and the isolated anaerob bacteria rate was 14.2%. All of the 6 samples in which anaerob bacteria isolated were all maxillary sinus aspiration materials. Microorganisms that isolated from the nose and the sinuses were similar with the rate of 25.8%, and microorganisms that isolated from the throat cultures and sinuses were similar with the rate of 22.5%. This study reveals the aerob and anaerob microbiology of the maxillary and ethmoid sinuses so the treatment of chronic sinusitis will be easier.

Three-dimensional space changes after premature loss of a maxillary primary first molar.

Science.gov (United States)

Park, Kitae; Jung, Da-Woon; Kim, Ji-Yeon

2009-11-01

A space maintainer is generally preferred when a primary first molar is lost before or during active eruption of the first permanent molars in order to prevent space loss. However, controversy prevails regarding the space loss after eruption of the permanent first molars. The purpose of this study was to examine spatial changes subsequent to premature loss of a maxillary primary first molar after the eruption of the permanent first molars. Thirteen children, five girls and eight boys, expecting premature extraction of a maxillary primary first molar because of caries and/or failed pulp therapy, were selected. Spatial changes were investigated using a three-dimensional laser scanner by comparing the primary molar space, arch width, arch length, and arch perimeter before and after the extraction of a maxillary primary first molar. Also, the inclination and angulation changes in the maxillary primary canines, primary second molars, and permanent first molars adjacent to the extraction site were investigated before and after the extraction of the maxillary primary first molar in order to examine the source of space loss. There was no statistically significant space loss on the extraction side compared to the control side (P = 0.33). No consistent findings were seen on the inclination and angulation changes on the extraction side. The premature loss of a maxillary primary first molar, in cases with class I molar relationship, has limited influence on the space in permanent dentition.

A Key to the Fishes of Mississippi Sound and Adjacent Waters,

Science.gov (United States)

1974-01-01

except in very young): no supplemental maxillary present . . . Oligoplites saurus Premaxillaries protractile: supplemental maxillary present... saurus ORDER ANGUILLIFORMES 1 Posterior nares on upper lip, below level of lower margin of eye ................. Ophichthidae (Page 7) Posterior nares...6, 7 Alilia egmontis, 8 LCarcharhinus lea cas. 3 Flops saurus . 7 Alectis crinitus, 20 Carcharhinus Iinbatus. 3 Fngraulidae. 8, 9 Alopias superciliosus

Trans-sinusal maxillary distraction for correction of midfacial hypoplasia: long-term clinical results.

Science.gov (United States)

Nadjmi, N; Schutyser, F; Van Erum, R

2006-10-01

Maxillary distraction osteogenesis is indicated in severe angle class III malocclusions, and severe maxillary hypoplasia among some cleft patients and other craniofacial deformities. Twenty patients, aged 8-48 years (mean 17.8+/-10.5 SD) with maxillary and midfacial hypoplasia were treated. The follow-up period was 13-65 months (mean 35+/-16.3 SD). A trans-sinusal maxillary distractor was placed intraorally at each side of the maxilla. The distraction vector was predicted using specialist software, and was transferred to the patients using stereolithographic models and individual templates. A (high) Le Fort I type osteotomy was performed. The amount of activation varied from 8 to 17.5 mm (mean 13.1+/-2.9 SD). Soft and hard tissue formation resulted in complete healing across the distraction gaps. The distractors are almost completely submerged, and can be left in place as long as necessary to avoid relapse. Wit's appraisal was used to measure the stability of the long-term distraction results. Results up to 5 years after distraction showed considerable maxillary advancement with long-term stability. Ongoing growth of the facial skeleton must be considered when distraction osteogenesis is chosen in growing patients.

Establishment of sexual dimorphism in north indian population by odontometric study of permanent maxillary canine teeth

Directory of Open Access Journals (Sweden)

Shalini Gupta

2014-01-01

Full Text Available Aim: To investigate whether sexual dimorphism can be established by odontometric study of permanent maxillary canine teeth as well as inter-canine width in north Indian population. Study Design: The study was carried out at department of oral and maxillofacial pathology, King George′s Medical University, Lucknow, India on students and patients reporting at OPD. Out of total 180 subjects examined 90 subjects were female and 90 were male. Impressions of the upper arch were made using alginate and casts poured in dental stone. The mesiodistal diameter (MD of the crown of permanent maxillary canine both on right and left sides and inter-canine width were measured. From these measurements, maxillary canine index was calculated. The percentage of sexual dimorphism (SD was assessed for all the parameters. Results: In the present study, the MD of maxillary canine for both right (P = 0.001 and left side (P = 0.005 was significantly higher among male subjects than females, Similar observation was found for inter-canine width too (P = 0.0001. However, the maxillary canine index for right and left was almost similar (P > 0.05 for both male and female subjects. The SD in right and left MDs of maxillary canine was 4.2% and 3.6% respectively. For, inter-canine width it was maximum (13.7%. However, SD in right and left canine index showed negative values (−2.1% and -0.9% respectively. Conclusion: There was SD in MD and inter-canine width of permanent maxillary canine teeth. SD was more on right permanent maxillary canine teeth than left permanent maxillary canine.

Bilateral maxillary fused second and third molars: a rare occurrence

OpenAIRE

Liang, Rui-Zhen; Wu, Jin-Tao; Wu, You-Nong; Smales, Roger J; Hu, Ming; Yu, Jin-Hua; Zhang, Guang-Dong

2012-01-01

This case report describes the diagnosis and endodontic therapy of maxillary fused second and third molars, using cone-beam computed tomography (CBCT). A 31-year-old Chinese male, with no contributory medical or family/social history, presented with throbbing pain in the maxillary right molar area following an unsuccessful attempted tooth extraction. Clinical examination revealed what appeared initially to be a damaged large extra cusp on the buccal aspect of the distobuccal cusp of the secon...

Radiodense concrements in sinus maxillaris-CT diagnosis of sinus aspergillosis

International Nuclear Information System (INIS)

Krennmair, G.; Lugmayr, H.; Lenglinger, F.

1993-01-01

11 patients with radiodense concrements in the sinus maxillaris underwent a preoperative computertomographic examination of the sinus maxillaris and the sinus concrements. 8 patients (72.7%) with the occurrence of radiodense concrements presented postoperative a histological and microbiological infection with aspergillus fumigatus. The CT-numbers of radiodense concrements in patients with aspergillus were 2802±302.4 HU (Hounsfield Unit). Concrements of patients without aspergillus infection (n=3) had lower density (368.6±149.1 HU; p [de

Pneumatisation of the maxillary sinus in normal and symptomatic children

International Nuclear Information System (INIS)

Odita, J.C.; Akamaguna, A.I.; Ugbodaga, C.I.; Ogisi, F.O.; Amu, O.D.

1986-01-01

The pattern of pneumatisation and normal width of the maxillary sinus in 191 Nigerian infants and children whose age range was 6 months to 14 years was determined. Fifty-four percent of children with no respiratory tract or sinus infection had opaque maxillary sinus. A figure of 44.5% was obtained amongst children with suspected bronchopneumonia. Only 41.5% of suspected cases of sinusitis, acute and chronic middle ear disease had opaque sinus. The highest rate of sinus opacity was seen in children under 2 years who were asymptomatic. The mean maximal width of normally aerated sinus was 8.74 mm for children under 2 years, 16.5 mm for 3-6 years, 21.5 mm for 7-11 years and 25 mm for children 12 years and above. We conclude that maxillary sinus opacity in our experience is an unreliable index for the diagnosis of sinusitis in children. (orig.)

Mucous retention cyst of the maxillary sinus.

Science.gov (United States)

Ruprecht, A; Batniji, S; el-Neweihi, E

1986-12-01

The mucous retention cyst is not a rare phenomenon. The incidence of dental patients was determined. Of 1685 patient radiographs reviewed, 44 (2.6%) had one or more mucous retention cysts in the maxillary sinuses.

Impacted maxillary central incisor: surgical exposure and orthodontic treatment.

Science.gov (United States)

Pinho, Teresa; Neves, Manuel; Alves, Célia

2011-08-01

This case report describes the treatment of a patient with a horizontally impacted maxillary central incisor, a canine in the same quadrant, and an inclusion tendency. Due to severe crowing in the maxilla and the Class II molar relationship on the impaction side, a 2-stage treatment plan was developed. In the first stage, the right first premolar and deciduous canine were extracted; this allowed enough space for the eruption of the maxillary right permanent canine. The second stage included surgical exposure and traction of the impacted central incisor with a fixed orthodontic appliance. An excisional uncovering technique was needed to expose the impacted incisor. After it erupted, an apically positioned partial-thickness flap was used to add keratinized attached gingiva in the area surrounding the crown, initially located in an area of unattached gingiva. The patient finished treatment with a normal and stable occlusion between the maxillary and mandibular arches and an adequate width of attached gingiva. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Transverse plane pelvic rotation increase (TPPRI following rotationally corrective instrumentation of adolescent idiopathic scoliosis double curves

Directory of Open Access Journals (Sweden)

Asher Marc A

2010-08-01

Full Text Available Abstract Background We have occasionally observed clinically noticeable postoperative transverse plane pelvic rotation increase (TPPRI in the direction of direct thoracolumbar/lumbar rotational corrective load applied during posterior instrumentation and arthrodesis for double (Lenke 3 and 6 adolescent idiopathic scoliosis (AIS curves. Our purposes were to document this occurrence; identify its frequency, associated variables, and natural history; and determine its effect upon patient outcome. Methods Transverse plane pelvic rotation (TPPR can be quantified using the left/right hemipelvis width ratio as measured on standing posterior-anterior scoliosis radiographs. Descriptive statistics were done to determine means and standard deviations. Non-parametric statistical tests were used due to the small sample size and non-normally distributed data. Significance was set at P Results Seventeen of 21 (81% consecutive patients with double curves (7 with Lenke 3 curves and 10 with Lenke 6 instrumented with lumbar pedicle screw anchors to achieve direct rotation had a complete sequence of measurable radiographs. While 10 of these 17 had no postoperative TPPRI, 7 did all in the direction of the rotationally corrective thoracolumbar instrumentation load. Two preoperative variables were associated with postoperative TPPRI: more tilt of the vertebra below the lower instrumented vertebra (-23° ± 3.1° vs. -29° ± 4.6°, P = 0.014 and concurrent anterior thoracolumbar discectomy and arthrodesis (5 of 10 vs. 7 of 7, P = 0.044. Patients with a larger thoracolumbar/lumbar angle of trunk inclination or larger lower instrumented vertebra plus one to sacrum fractional/hemicurve were more likely to have received additional anterior thoracolumbar discectomy and arthrodesis (c = 0.90 and c = 0.833, respectively. Postoperative TPPRI resolved in 5 of the 7 by intermediate follow-up at 12 months. Patient outcome was not adversely affected by postoperative TPPRI

The Maxillary Palp of Aedes aegypti, a Model of Multisensory Integration

Science.gov (United States)

2014-01-01

The maxillary palp of Aedes aegypti, a model of multisensory integration Jonathan D. Bohbot, Jackson T. Sparks, Joseph C. Dickens* United States...24 February 2014 Keywords: Aedes aegypti Olfaction Mosquito Maxillary palp Thermosensation Mechanosensation a b s t r a c t Female yellow-fever...mosquitoes, Aedes aegypti, are obligate blood-feeders and vectors of the pathogens that cause dengue fever, yellow fever and Chikungunya. This feeding

Eruption of the maxillary canines in relation to skeletal maturity.

Science.gov (United States)

Baccetti, Tiziano; Franchi, Lorenzo; De Lisa, Simona; Giuntini, Veronica

2008-05-01

Our aim in this study was to assess the relationship between the eruption of the permanent maxillary canines and skeletal maturity in subjects with different skeletal relationships in the sagittal and vertical planes. A sample of 152 subjects (63 boys, 89 girls) with erupting permanent maxillary canines was analyzed. On the lateral cephalograms, the stage of cervical vertebral maturation was assessed. Then the subjects were divided into prepeak (before the pubertal growth spurt, cervical stage [CS]1 and CS2), peak (during the pubertal growth spurt, CS3 and CS4), and postpeak (after the pubertal growth spurt, CS5 and CS6) groups. Skeletal relationships in the sagittal and vertical planes were evaluated, and relationships to timing of canine eruption were tested statistically. The prepeak group comprised 86 subjects, the peak group 66 subjects, and the postpeak group 0 subjects. The differences in prevalence rates between either the prepeak or peak groups and the postpeak group were statistically significant (P < 0.001). The prevalence rate for hyperdivergent subjects showing eruption of the permanent maxillary canine in the prepeak group (37.2%) was significantly higher than in the reference orthodontic population (21%). The eruption of the permanent maxillary canine can occur at any stage in skeletal maturation before the end the pubertal growth spurt (CS1-CS4), with hyperdivergent subjects more frequently having prepubertal canine eruption.

Palatal Surface Area of Maxillary Plaster Casts

DEFF Research Database (Denmark)

Darvann, Tron Andre; Hermann, Nuno V.; Ersbøll, Bjarne Kjær

2007-01-01

Objective: To investigate the relationship between corresponding two-dimensional and three-dimensional measurements on maxillary plaster casts taken from photographs and three-dimensional surface scans, respectively. Materials and Methods: Corresponding two-dimensional and three-dimensional measu...

Orbital wall fractures

International Nuclear Information System (INIS)

Iinuma, Toshitaka; Ishio, Ken-ichirou; Yoshinami, Hiroyoshi; Kuriyama, Jun-ichi; Hirota, Yoshiharu.

1993-01-01

A total of 59 cases of mild facial fractures (simple orbital wall fractures, 34 cases, other facial fractures, 25 cases) with the clinical suspects of orbital wall fractures were evaluated both by conventional views (Waters' and Caldwell views) and coronal CT scans. Conventional views were obtained, as an average, after 4 days and CT after 7 days of injuries. Both the medial wall and the floor were evaluated at two sites, i.e., anterior and posterior. The ethmoid-maxillary plate was also included in the study. The degree of fractures was classified as, no fractures, fractures of discontinuity, dislocation and fragmentation. The coronal CT images in bone window condition was used as reference and the findings were compared between conventional views and CT. The correct diagnosis was obtained as follows: orbital floor (anterior, 78%, posterior, 73%), medial orbital wall (anterior, 72%, posterior, 72%) and ethmoid-maxillary plate (64%). The false positive diagnosis was as follows: orbital floor (anterior only, 13%), medial orbital wall (anterior only, 7%) and ethmoid-maxillary plate (11%). The false negative diagnosis was as follows: orbital floor (anterior, 9%, posterior, 10%), medial orbital wall (anterior, 21%, posterior, 28%) and ethmoid-maxillary plate (21%). The results were compared with those of others in the past. (author)

The unerupted maxillary canine - a post-surgical review.

LENUS (Irish Health Repository)

O'Dowling, Ian

2009-10-01

The orthodontic records of 685 patients referred for surgical exposure of an unerupted impacted maxillary canine tooth were examined. The condition was more common among females than males, slightly less than 2:1. The impacted teeth had a palatal-labial ratio of 3:1. All of the teeth were exposed using the open surgical technique and in 98% of cases the tooth erupted and was orthodontically aligned. In 2% of cases ankylosis occurred and the teeth were subsequently extracted. The presence of peg-shaped lateral incisors associated with the impacted maxillary canine tooth was 3.4% of the total number of impacted teeth and congenital absence was found in 1.7% of impacted teeth.

Orthodontic-surgical treatment of bilateral maxillary canine impaction

Directory of Open Access Journals (Sweden)

Sumitra

2012-01-01

Full Text Available A 13-year-old female patient reported with the chief complaint of irregular front teeth. She had a skeletal Class III and Angle′s Class I malocclusion with hyperdivergent growth pattern and bilateral impaction of maxillary canines. Surgical exposure of the impacted teeth and orthodontic alignment was planned. The surgical exposure was done by a minimally invasive modified window technique. Orthodontic treatment of impacted canines without causing significant morbidity to the adjacent teeth and periodontium is a challenge. The bilaterally impacted maxillary canines were successfully aligned and leveled. The depth of the gingival sulcus and clinical crown heights of disimpacted teeth were normal post-treatment and after 1 year of retention.

The unerupted maxillary canine--a post-surgical review.

Science.gov (United States)

O'Dowling, Ian

2009-01-01

The orthodontic records of 685 patients referred for surgical exposure of an unerupted impacted maxillary canine tooth were examined. The condition was more common among females than males, slightly less than 2:1. The impacted teeth had a palatal-labial ratio of 3:1. All of the teeth were exposed using the open surgical technique and in 98% of cases the tooth erupted and was orthodontically aligned. In 2% of cases ankylosis occurred and the teeth were subsequently extracted. The presence of peg-shaped lateral incisors associated with the impacted maxillary canine tooth was 3.4% of the total number of impacted teeth and congenital absence was found in 1.7% of impacted teeth.

Neonatal maxillary orthopedics: past to present

NARCIS (Netherlands)

Kuijpers-Jagtman, A.M.; Prahl, C.; Berkowitz, S.

2013-01-01

Neonatal maxillary orthopedics was introduced in the treatment protocol for cleft lip and palate in the 1950s of the last century. A wide range of appliances has been designed with pin-retained active appliances at one end of the spectrum and passive appliances at the other. Although neonatal

Titanium versus zirconia implants supporting maxillary overdentures: three-dimensional finite element analysis.

Science.gov (United States)

Osman, Reham B; Elkhadem, Amr H; Ma, Sunyoung; Swain, Michael V

2013-01-01

The purpose of this study was to compare the stress and strain occurring in peri-implant bone and implants used to support maxillary overdentures. Three-dimensional finite element analysis (3D FEA) was used to compare one-piece zirconia and titanium implants. Two types of implants were simulated using a 3D FEA model: one-piece zirconia and titanium implants (diameter, 3.8 × 11.5 mm) with 2.25-mm diameter ball abutments. In each simulation four implants were placed bilaterally in the canine/premolar region of an edentulous maxillary model. Static loads were applied axially and 20 degrees buccolingually on the buccal slope of the lingual cusps of posterior teeth of the first quadrant. Von Mises stresses and equivalent strains generated in peri-implant bone and first principal stresses in the implants were calculated. Comparable stress and strain values were shown in the peri-implant bone for both types of implants. The maximum equivalent strain produced in the peri-implant region was mostly within the range for bone augmentation. Under oblique loading, maximum von Mises stresses and equivalent strain were more evident at the neck of the most distal implant on the loaded side. Under axial load, the stress and strain were transferred to the peri-implant bone around the apex of the implant. Maximum tensile stresses that developed for either material were well below their fracture strength. The highest stresses were mainly located at the distobuccal region of the neck for the two implant materials under both loading conditions. From a biomechanical point of view, ceramic implants made from yttrium-stabilized tetragonal polycrystalline zirconia may be a potential alternative to conventional titanium implants for the support of overdentures. This is particularly relevant for a select group of patients with a proven allergy to titanium. Prospective clinical studies are still required to confirm these in vitro results. Different simulations presenting various cortical bone

Patient satisfaction with maxillary 3-implant overdentures using different attachment systems opposing mandibular 2-implant overdentures.

Science.gov (United States)

Al-Zubeidi, Mohammed I; Alsabeeha, Nabeel H M; Thomson, W Murray; Payne, Alan G T

2012-05-01

Patient-based outcomes with maxillary overdentures on a minimum number of implants, opposing mandibular 2-implant overdentures are not evident in the literature. To evaluate patient's satisfaction with maxillary 3-implant overdentures, opposing mandibular 2-implant overdentures, using two different attachment systems over the first 2 years of service. Forty participants wearing mandibular 2-implant overdentures for 3 years were randomly allocated to one of two similar implant system groups to receive maxillary 3-implant overdentures. Twenty participants were allocated to splinted and unsplinted attachment system treatment groups for each system. Patient satisfaction with pre-treatment complete maxillary dentures, with maxillary 3-implant overdentures at baseline and annually for 2 years, was measured using visual analogue scale questionnaires and the oral health impact profiles. Palatal coverage of the maxillary overdentures was reduced at the first annual recall. Data showed significant improvement in pain reduction, comfort, stability, and function variables of the visual analogue scale after treatment. Analysis by prosthodontic design using visual analogue scale showed no significant difference. The total oral health impact profile-14 scores after treatment for all participants, regardless of prosthodontic design, were significantly lower (more satisfied). The overall oral health impact profile-20E score at baseline was significantly higher (more satisfied) compared with pre-treatment conventional maxillary dentures. No significant changes were observed in the first or second years compared with baseline results. Twenty-two participants (84.6%) preferred reduced palatal coverage, regardless of prosthodontic design, after 1 year. Twenty participants (76.9%) still preferred reduced palatal coverage at the end of the second year. The provision of maxillary 3-implant overdentures to oppose mandibular 2-implant overdentures significantly improve levels of patient

The Posterior Transpetrosal Approach in a Case of Large Retrochiasmatic Craniopharyngioma: Operative Video and Technical Nuances.

Science.gov (United States)

Labidi, Moujahed; Watanabe, Kentaro; Loit, Marie-Pier; Hanakita, Shunya; Froelich, Sébastien

2018-02-01

Objectives  To discuss the use of the posterior petrosal approach for the resection of a retrochiasmatic craniopharyngioma. Design  Operative video. Results  In this case video, the authors discuss the surgical management of a large craniopharyngioma, presenting with mass effect on the third ventricle and optic apparatus. A first surgical stage, through an endoscopic endonasal transtubercular approach, allowed satisfactory decompression of the optic chiasma and nerves in preparation for adjuvant therapy. However, accelerated growth of the tumor, with renewed visual deficits and mass effect on the hypothalamus and third ventricle, warranted a supplementary resection. A posterior transpetrosal 1 2 (also called "retrolabyrinthine transtentorial") was performed to obtain a better exposure of the tumor and the surrounding anatomy (floor and walls of the third ventricle, perforating vessels, optic nerves, etc.) 3 . Nuances of technique and surgical pearls related to the posterior transpetrosal are discussed and illustrated in this operative video, including the posterior mobilization of the transverse-sigmoid sinuses junction, preservation of the venous anatomy during the tentorial incision, identification and preservation of the floor of the third ventricle during tumor resection, and a careful multilayer closure. Conclusion  Retrochiasmatic craniopharyngiomas are difficult to reach tumors that often require skull base approaches, either endoscopic endonasal or transcranial. The posterior transpetrosal approach is an important part of the surgical armamentarium to safely resect these complex tumors. The link to the video can be found at: https://youtu.be/2MyGLJ_v1kI .

A New Anatomically Based Nomenclature for the Roots and Root Canals—Part 1: Maxillary Molars

Directory of Open Access Journals (Sweden)

Jojo Kottoor

2012-01-01

Full Text Available Numerous terminologies have been employed in the dental literature to describe the roots and root canal systems of maxillary molars. This multiplicity in naming of roots and canals makes the reader susceptible to misinterpretation and confusion. No consensus thus far has been arrived at for defining the names of roots and root canals in maxillary molars, including their various morphological aberrations. The anatomical relation of roots and their root canals were identified and were subsequently named based on definite sets of criteria. A new method for identification and naming of roots and root canal anatomy in maxillary molars, based on their root and canal relationship, was formulated and is presented in this paper. The nomenclature makes certain essential modifications to the traditional approach to accommodate naming of the various aberrations presented in the maxillary molars. A simple, yet extensive, nomenclature system has been proposed that appropriately names the internal and external morphology of maxillary molars.

A new anatomically based nomenclature for the roots and root canals-part 1: maxillary molars.

Science.gov (United States)

Kottoor, Jojo; Albuquerque, Denzil Valerian; Velmurugan, Natanasabapathy

2012-01-01

Numerous terminologies have been employed in the dental literature to describe the roots and root canal systems of maxillary molars. This multiplicity in naming of roots and canals makes the reader susceptible to misinterpretation and confusion. No consensus thus far has been arrived at for defining the names of roots and root canals in maxillary molars, including their various morphological aberrations. The anatomical relation of roots and their root canals were identified and were subsequently named based on definite sets of criteria. A new method for identification and naming of roots and root canal anatomy in maxillary molars, based on their root and canal relationship, was formulated and is presented in this paper. The nomenclature makes certain essential modifications to the traditional approach to accommodate naming of the various aberrations presented in the maxillary molars. A simple, yet extensive, nomenclature system has been proposed that appropriately names the internal and external morphology of maxillary molars.

Molecular fingerprinting of TGFbeta-treated embryonic maxillary mesenchymal cells.

Science.gov (United States)

Pisano, M M; Mukhopadhyay, P; Greene, R M

2003-11-01

The transforming growth factor-beta (TGF(beta)) family represents a class of signaling molecules that plays a central role in normal embryonic development, specifically in development of the craniofacial region. Members of this family are vital to development of the secondary palate where they regulate maxillary and palate mesenchymal cell proliferation and extracellular matrix synthesis. The function of this growth factor family is particularly critical in that perturbation of either process results in a cleft of the palate. While the cellular and phenotypic effects of TGF(beta) on embryonic craniofacial tissue have been extensively cataloged, the specific genes that function as downstream mediators of TGF(beta) in maxillary/palatal development are poorly defined. Gene expression arrays offer the ability to conduct a rapid, simultaneous assessment of hundreds to thousands of differentially expressed genes in a single study. Inasmuch as the downstream sequelae of TGF(beta) action are only partially defined, a complementary DNA (cDNA) expression array technology (Clontech's Atlas Mouse cDNA Expression Arrays), was utilized to delineate a profile of differentially expressed genes from TGF(beta)-treated primary cultures of murine embryonic maxillary mesenchymal cells. Hybridization of a membrane-based cDNA array (1178 genes) was performed with 32P-labeled cDNA probes synthesized from RNA isolated from either TGF(beta)-treated or vehicle-treated embryonic maxillary mesenchymal cells. Resultant phosphorimages were subject to AtlasImage analysis in order to determine differences in gene expression between control and TGF(beta)-treated maxillary mesenchymal cells. Of the 1178 arrayed genes, 552 (47%) demonstrated detectable levels of expression. Steady state levels of 22 genes were up-regulated, while those of 8 other genes were down-regulated, by a factor of twofold or greater in response to TGF(beta). Affected genes could be grouped into three general functional

The role of proper treatment of maxillary sinusitis in the healing of persistent oroantral fistula

Directory of Open Access Journals (Sweden)

David B. Kamadjaja

2008-09-01

Full Text Available Background: Oroantral communication (OAC is one of the possible complications after extraction of the upper teeth. If not identified and treated properly, a large OAC may develop into oroantral fistula (OAF which means that there is a permanent epithelium-lined communication between antrum and oral cavity. Such fistulas may cause ingress of microorganism from oral cavity into the antrum leading to maxillary sinusitis. Oroantral fistula usually persists if the infection in the maxillary antrum is not eliminated. Therefore, treatment of oroantral fistula should include management of maxillary sinusitis in which surgical closure of oroantral fistula should be done only when the sinusitis has been cured. Purpose: This case report emphasizes on the importance of proper management of maxillary sinusitis in the healing of oroantral fistula. Case: A case of an oroantral fistula following removal of upper left third molar is presented. As the maxillary sinusitis was not identified pre-operatively, two surgical procedures to close the fistula had ended up in dehiscence. Case management: The diagnosis of maxillary sinusitis was finally made and the sinusitis subsequently treated with combination of trans-alveolar sinus wash out, insertion of an acrylic splint, and two series of nasal and sinus physiotherapy procedures. The size of the defect decreased gradually during the treatment of the sinusitis and finally closed up without any further surgical intervention. Conclusion: This case report points out that it is important to detect intraoperatively an antral perforation after any surgery of the maxillary teeth and to close any oroantral communication as early as possible and that it is important to treat properly any pre-existing maxillary sinusitis before any surgical method is done to close the fistula.

Immediate and six-month space changes after premature loss of a primary maxillary first molar.

Science.gov (United States)

Lin, Yai-Tin; Lin, Wen-Hsien; Lin, Yng-Tzer J

2007-03-01

Premature loss of primary maxillary first molars has been associated with a number of consequences (such as tipping of the first permanent molar). The aim of the authors' study was to investigate dental-arch space problems arising as a result of premature loss of a primary maxillary first molar. This study was composed of 19 children who experienced unilateral premature loss of a primary maxillary first molar. The authors used each patient's intact contralateral arch segment as a control. The authors obtained maxillary dental study casts two or three days after the tooth was extracted, as well as six months later. The D + E space from the extraction side six months after removal of the tooth (mean +/- standard deviation, 15.62 +/- 1.13 millimeters) was significantly smaller than the space on the control side (16.88 +/- 1.12 mm) and the initial D + E space (16.70 +/- 0.69 mm). The authors found a significantly shorter arch length (25.47 +/- 1.58 mm) and larger intercanine width (31.29 +/- 2.49 mm) six months after the tooth was extracted compared with the initial arch length (25.66 +/- 1.64 mm) and intercanine width (30.42 +/- 2.64 mm). The early space changes to the maxillary arch subsequent to premature loss of a primary maxillary first molar are primarily distal drift of the primary canines toward the extraction space and palatal migration of the maxillary incisors. Although 1 mm of space was lost, which is statistically significant, this is not likely to be of sufficient clinical significance to warrant use of a space maintainer. If palatal movement appears to be needed, the dentist should consider use of a palatal arch rather than a band-and-loop maintainer. The effects of space maintainers need to be re-evaluated in cases of unilateral premature loss of a primary maxillary first molar.

Partial maxillary osteotomy following an unsuccessful forced eruption of an impacted maxillary canine: 10 year follow-up. Review and case report

Directory of Open Access Journals (Sweden)

Edela Puricelli

2012-12-01

Full Text Available The maxillary canines are amongst the most frequently impacted teeth, second only to the third molars. Several conservative orthodontic and surgical techniques are available to position the teeth properly in the dental arch, even in severe cases. However, when an extraction is necessary, it often leaves a critical alveolar defect of difficult management. The authors present the technique of Partial Maxillary Osteotomy, in which a dento-alveolar segment is moved mesially, hence closing the remaining space, allowing for the formation of healthy periodontium and resulting in an adequate functional and aesthetic outcome. A case report is presented with a 10 year follow-up, proving the technique's stability in the long term.

Maxillary Chronic Osteomyelitis Caused by Domestic Violence: A Diagnostic Challenge

Science.gov (United States)

Oliveira, Tamyris Inácio; de Carli, Marina Lara; Ribeiro Junior, Noé Vital; Pereira, Alessandro Antônio Costa; Tatakis, Dimitris N.; Hanemann, João Adolfo Costa

2014-01-01

Maxillary osteomyelitis is a rare condition defined as inflammation of the bone primarily caused by odontogenic bacteria, with trauma being the second leading cause. The present report documents a rare case of maxillary osteomyelitis in a 38-year-old female who was the victim of domestic violence approximately a year prior to presentation. Intraoral examination revealed a lesion appearing as exposed bony sequestrum, with significant destruction of gingiva and alveolar mucosa in the maxillary right quadrant, accompanied by significant pain, local edema, and continued purulence. Teeth numbers 11, 12, 13, 14, and 15 were mobile, not responsive to percussion, and nonvital. Treatment included antibiotic therapy for seven days followed by total enucleation of the necrotic bone tissue and extraction of the involved teeth. Microscopic findings confirmed the clinical diagnosis of chronic suppurative osteomyelitis. Six months postoperatively, the treated area presented complete healing and there was no sign of recurrence of the lesion. PMID:25610667

Maxillary Chronic Osteomyelitis Caused by Domestic Violence: A Diagnostic Challenge

Directory of Open Access Journals (Sweden)

Tamyris Inácio Oliveira

2014-01-01

Full Text Available Maxillary osteomyelitis is a rare condition defined as inflammation of the bone primarily caused by odontogenic bacteria, with trauma being the second leading cause. The present report documents a rare case of maxillary osteomyelitis in a 38-year-old female who was the victim of domestic violence approximately a year prior to presentation. Intraoral examination revealed a lesion appearing as exposed bony sequestrum, with significant destruction of gingiva and alveolar mucosa in the maxillary right quadrant, accompanied by significant pain, local edema, and continued purulence. Teeth numbers 11, 12, 13, 14, and 15 were mobile, not responsive to percussion, and nonvital. Treatment included antibiotic therapy for seven days followed by total enucleation of the necrotic bone tissue and extraction of the involved teeth. Microscopic findings confirmed the clinical diagnosis of chronic suppurative osteomyelitis. Six months postoperatively, the treated area presented complete healing and there was no sign of recurrence of the lesion.

Effectiveness of TAD-anchored maxillary protraction in late mixed dentition.

Science.gov (United States)

Feng, Xiaoxia; Li, Jianhua; Li, Yu; Zhao, Zhihe; Zhao, Sen; Wang, Jue

2012-11-01

To evaluate the effectiveness of temporary anchorage device (TAD)-anchored maxillary protraction (MP) in terms of the skeletal and dentoalveolar changes and to compare it with traditional tooth-anchored MP. A computerized literature search for relative randomized controlled trials and prospective controlled trials was performed in PubMed, MEDLINE, Cochrane Central Register of Controlled Trials, Embase, CNKI, and Google Scholar, complemented with manual search. Data extraction and quality assessment were carried out by two reviewers independently. Meta-analysis was followed when possible; otherwise, description was done. Forty articles were found, among which four trials were qualified for meta-analysis. The results showed that there was significant difference between TAD-anchored MP and untreated control in terms of maxillary advancement (weighted mean differences (WMD) 3.08 mm; 95% CI: 1.61 to approximately 4.56; P TAD-anchored MP might have a greater maxillary advancement effect and might reduce skeletal and dental side effects, compared with tooth-anchored MP.

The single-tooth implant treatment of congenitally missing maxillary lateral incisors using angled abutments: A clinical report

Directory of Open Access Journals (Sweden)

Suleyman Hakan Tuna

2009-01-01

Full Text Available The maxillary lateral incisor is the second most common congenitally absent tooth. There are several treatment options for replacing the missing maxillary lateral incisor, including canine substitution, tooth-supported restoration, or single-tooth implant. Dental implants are an appropriate treatment option for replacing missing maxillary lateral incisor teeth in adolescents when their dental and skeletal development is complete. This case report presents the treatment of a patient with congenitally missing maxillary lateral incisors using dental implants with angled abutments.

Radiation-induced maxillary cancer

International Nuclear Information System (INIS)

Haguma, Naoyuki; Shirane, Makoto; Hirakawa, Katsuhiro; Suzuki, Mamoru; Yajin, Kouji; Harada, Yasuo

1990-01-01

A maxillary cancer (T 2 N 0 M 0 ) recurred twice, five years and 18 years after the initial therapy. The first therapy was continuous intra-arterial infusion of 5-FU (5700 mg) and irradiation (50 Gy). The second therapy was intravenous infusion of 5-FU (4500 mg) and irradiation (46 Gy). The third therapy was partial maxillectomy and LASER cauterization. In this particular case local inflammation due to remaining food and repeated irradiation might have been responsible for the recurrences. (author)

Evaluation of sexual dimorphism using permanent maxillary first molar in Sri Ganganagar population

Directory of Open Access Journals (Sweden)

Sakshi Mehta

2017-01-01

Full Text Available Aim of Study: The aim is to evaluate existence of sexual dimorphism by variation in right and left permanent maxillary molars using buccolingual width (BLW and mesio-distal width (MDW measured intraorally and on study casts among Sri Ganganagar population. Materials and Methods: Fifty patients (25 males and 25 females with 17–25 years of age were selected. Impressions of maxillary arch were taken and the BLW and MDW were measured using digital Vernier calipers on study casts and intraorally. Results: Highly significant correlation was found between MDW and BLW of both the maxillary permanent first molars for both genders (P < 0.05 intraorally. The MDW and BLW on study cast of both sides in both gender were more on left side in males while on right side in females. Conclusion: Left maxillary permanent first molar showed minimum mean difference of measurements on study cast and introrally than right, thus better predictor for gender dimorphism in forensics.

Endoscopic partial medial maxillectomy with mucosal flap for maxillary sinus mucoceles.

Science.gov (United States)

Durr, Megan L; Goldberg, Andrew N

2014-01-01

To describe a technique of endoscopic medial maxillectomy with mucosal flap for postoperative maxillary sinus mucoceles and to present a case series of subjects who underwent this procedure. This case series includes four subjects with postoperative maxillary sinus mucoceles who underwent resection via endoscopic partial medial maxillectomy with a mucosal flap. We will discuss the clinical presentation, imaging characteristics, operative details, and outcomes. Four subjects are included in this study. The average age at the time of medial maxillectomy was 52 years (range 35-65 years). Three subjects (75%) were female. One subject (25%) had bilateral postoperative maxillary sinus mucoceles. Two subjects (50%) had unilateral right sided mucoceles, and the remaining subject had a unilateral left sided mucocele. All subjects had a history of multiple sinus procedures for chronic sinusitis including Caldwell-Luc procedures ipsilateral to the postoperative mucocele. All subjects underwent endoscopic medial maxillectomy without complication and were symptom free at the last follow up appointment, average 24 months (range 3-71 months) after medial maxillectomy. For postoperative maxillary sinus mucoceles in locations that are difficult to access via the middle meatus antrostomy, we recommend endoscopic medial maxillectomy with mucosal flap. Our preliminary experience with four subjects demonstrates complete resolution of symptoms after this procedure. Copyright © 2014 Elsevier Inc. All rights reserved.

Maxillary sinusitis and periapical abscess following periodontal therapy: a case report using three-dimensional evaluation.

Science.gov (United States)

Huang, Chih-Hao; Brunsvold, Michael A

2006-01-01

Maxillary sinusitis may develop from the extension of periodontal disease. In this case, reconstructed three-dimensional images from multidetector spiral computed tomographs were helpful in evaluating periodontal bony defects and their relationship with the maxillary sinus. A 42-year-old woman in good general health presented with a chronic deep periodontal pocket on the palatal and interproximal aspects of tooth #14. Probing depths of the tooth ranged from 2 to 9 mm, and it exhibited a Class 1 mobility. Radiographs revealed a close relationship between the root apex and the maxillary sinus. The patient's periodontal diagnosis was localized severe chronic periodontitis. Treatment of the tooth consisted of cause-related therapy, surgical exploration, and bone grafting. A very deep circumferential bony defect at the palatal root of tooth #14 was noted during surgery. After the operation, the wound healed without incidence, but 10 days later, a maxillary sinusitis and periapical abscess developed. To control the infection, an evaluation of sinus and alveolus using computed tomographs was performed, systemic antibiotics were prescribed, and endodontic treatment was initiated. Two weeks after surgical treatment, the infection was relieved with the help of antibiotics and endodontic treatment. Bilateral bony communications between the maxillary sinus and periodontal bony defect of maxillary first molars were shown on three-dimensional computed tomographs. The digitally reconstructed images added valuable information for evaluating the periodontal defects. Three-dimensional images from spiral computed tomographs (CT) aided in evaluating and treating the close relationship between maxillary sinus disease and adjacent periodontal defects.

Use of repeat anterior maxillary distraction to correct residual midface hypoplasia in cleft patients.

Science.gov (United States)

Richardson, Sunil; Krishna, Shreya; Bansal, Avi

2017-12-01

The study was designed to evaluate the efficacy of performing a second, repeat anterior maxillary distraction (AMD) to treat residual cleft maxillary hypoplasia. Five patients between the ages of 12 to 15 years with a history of AMD and with residual cleft maxillary hypoplasia were included in the study. Inclusion was irrespective of gender, type of cleft lip and palate, and the amount of advancement needed. Repeat AMD was executed in these patients 4 to 5 years after the primary AMD procedure to correct the cleft maxillary hypoplasia that had developed since the initial procedure. Orthopantomogram (OPG) and lateral cephalograms were taken for evaluation preoperatively, immediately after distraction, after consolidation, and one year postoperatively. The data obtained was tabulated and a Mann Whitney U-test was used for statistical comparisons. At the time of presentation, a residual maxillary hypoplasia was observed with a well maintained distraction gap on the OPG which ruled out the occurrence of a relapse. Favorable movement of the segments without any resistance was seen in all patients. Mean maxillary advancement of 10.56 mm was achieved at repeat AMD. Statistically significant increases in midfacial length, SNA angle, and nasion perpendicular to point A distance was achieved ( P =0.012, P =0.011, and P =0.012, respectively). Good profile was achieved for all patients. Minimal transient complications, for example anterior open bite and bleeding episodes, were managed. Addressing the problem of cleft maxillary hypoplasia at an early age (12-15 years) is beneficial for the child. Residual hypoplasia may develop in some patients, which may require additional corrective procedures. The results of our study show that AMD can be repeated when residual deformity develops with the previous procedure having no negative impact on the results of the repeat procedure.

Orthopedic treatment of Class III malocclusion with rapid maxillary expansion combined with a face mask: a cephalometric assessment of craniofacial growth patterns

Directory of Open Access Journals (Sweden)

Daniella Torres Tagawa

2012-06-01

Full Text Available OBJECTIVE: The aim of this prospective study was to assess potential changes in the cephalometric craniofacial growth pattern of 17 children presenting Angle Class III malocclusion treated with a Haas-type expander combined with a face mask. METHODS: Lateral cephalometric radiographs were taken at beginning (T1 and immediately after removal of the appliances (T2, average of 11 months of treatment. Linear and angular measurements were used to evaluate the cranial base, dentoskeletal changes and facial growth pattern. RESULTS: The length of the anterior cranial base experienced a reduction while the posterior cranial base assumed a more vertical position at T1. Some maxillary movement occurred, there was no rotation of the palatal plane, there was a slight clockwise rotation of the mandible, although not significant. The ANB angle increased, thereby improving the relationship between the jaws; dentoalveolar compensation was more evident in the lower incisors. Five out of 12 cases (29.41% showed the following changes: In one case the pattern became more horizontal and in four cases more vertical. CONCLUSIONS: It was concluded after a short-term assessment that treatment with rapid maxillary expansion (RME associated with a face mask was effective in the correction of Class III malocclusion despite the changes in facial growth pattern observed in a few cases.

Posterior fossa malformations: main features and limits in prenatal diagnosis

Energy Technology Data Exchange (ETDEWEB)

Garel, Catherine [Hopital d' Enfants Armand-Trousseau, Department of Radiology, Paris (France)

2010-06-15

Posterior fossa (PF) malformations are commonly observed during prenatal screening. Their understanding requires knowledge of the main steps of PF development and knowledge of normal patterns in US and MR imaging. The vast majority of PF malformations can be strongly suspected by acquiring a midline sagittal slice and a transverse slice and by systematically scrutinizing the elements of the PF: cerebellar vermis, hemispheres, brainstem, fourth ventricle, PF fluid spaces and tentorium. Analysis of cerebellar echogenicity and biometry is also useful. This review explains how to approach the diagnosis of the main PF malformations by performing these two slices and answering six key questions about the elements of the PF. The main imaging characteristics of PF malformations are also reviewed. (orig.)

Two-Rooted Maxillary First Molars with Two Canals: A Case Series

OpenAIRE

Shakouie, Sahar; Mokhtari, Hadi; Ghasemi, Negin; Gholizadeh, Seddigheh

2013-01-01

Thorough understanding of the anatomic and internal morphology of a root canal system is absolutely essential for the success of endodontic treatment. Since permanent maxillary first molars have shown variation in internal anatomy, morphology, this tooth has been reviewed extensively. Presence of two canals in a two-rooted maxillary first molar has rarely been reported in studies describing tooth and root canal anatomies. In this report, three cases are presented, which involve the root canal...

Effect of Rapid Maxillary Expansion on Glenoid Fossa and Condyle-Fossa Relationship in Growing Patients (MEGP): Study Protocol for a Controlled Clinical Trial

Science.gov (United States)

Ghoussoub, Mona Sayegh; Rifai, Khaldoun; Garcia, Robert; Sleilaty, Ghassan

2018-01-01

Aims and Objectives: Rapid maxillary expansion (RME) is an orthodontic nonsurgical procedure aiming at increasing the width of the maxilla by opening mainly the intermaxillary suture in patients presenting a transverse maxillary skeletal deficiency. The objectives of the current prospective controlled clinical and radiographic study are to evaluate the hypothesis that RME in growing patients will result in radiographic changes at the level of interglenoid fossa distance, condyle-fossa relationship, and nasal cavity widths compared to the group who received no treatment initially and served as untreated control. Materials and Methods: In this prospective controlled clinical and radiographic study, forty healthy growing patients selected from a school-based population following a large screening campaign, ranging in age between 8 and 13 years, presenting a maxillary constriction with bilateral crossbite, and candidates for RME are being recruited. The first group will include participants willing to undergo treatment (n = 25) and the other group will include those inclined to postpone (n = 15). Results: The primary outcome is to compare radiologically the interglenoid fossa distance and the condyle-fossa relationship; nasal cavity width will be a secondary outcome. A multivariable analysis of Covariance model will be used, with the assessment of the time by group interaction, using age as covariate. The project protocol was reviewed and approved by the Ethics Committee of the Lebanese University, National Institute in Lebanon (CUEMB process number 31/04/2015). The study is funded by the Lebanese University and Centre National de Recherche Scientifique, Lebanon (Number: 652 on 14/04/2016). Conclusion: This prospective controlled clinical trial will give information about the effect of RME on the glenoid fossa and condyle-fossa relationship and its impact on the nasal cavity width. Trial Registration: Retrospectively registered in BioMed Central (DOI10.1186/ISRCTN

The edentulous mandible opposing maxillary natural teeth: treatment considerations utilizing implant overdentures.

Science.gov (United States)

Winkler, S; Monasky, G E

1993-01-01

The restoration of the edentulous mandible opposing all or part of the maxillary natural dentition with implant overdentures is described. There are many situations in which the maxillary teeth opposing an edentulous mandible can and should be retained. Mandibular implant overdentures can be utilized as long as health considerations, morphologic features of the resorbed mandible, and maxillomandibular jaw relationships are satisfactory.

Treatment of maxillary cleft palate: Distraction osteogenesis vs. orthognathic surgery

Science.gov (United States)

Rachmiel, Adi; Even-Almos, Michal; Aizenbud, Dror

2012-01-01

Purpose: The purpose of this paper is to compare the treatment of hypoplastic, retruded maxillary cleft palate using distraction osteogenesis vs. orthognathic surgery in terms of stability and relapse, growth after distraction and soft tissue profile changes. Materials and Methods: The cleft patients showed anteroposterior maxillary hypoplasia with class III malocclusion and negative overjet resulting in a concave profile according to preoperative cephalometric measurements, dental relationship, and soft tissue analysis. The patients were divided in two groups of treatment : S0 eventeen were treated by orthognathic Le Fort I osteotomy fixed with four mini plates and 2 mm screws, and 19 were treated by maxillary distraction osteogenesis with rigid extraoral devices (RED) connected after a Le Fort I osteotomy. The rate of distraction was 1 mm per day to achieve Class I occlusion with slight overcorrection and to create facial profile convexity. Following a 10 week latency period the distraction devices were removed. Results: In the RED group the maxilla was advanced an average of 15.80 mm. The occlusion changed from class III to class I. The profile of the face changed from concave to convex. At a 1-year follow up the results were stable. The mean orthognathic movement was 8.4 mm. Conclusion: In mild maxillary deficiency a one stage orthognathic surgery is preferable. However, in patients requiring moderate to large advancements with significant structural deficiencies of the maxilla or in growing patients the distraction technique is preferred. PMID:23483803

Maxillary implant-retained partial overdenture with Dolder bar attachment: a clinical report.

Science.gov (United States)

Kim, Hyeongil; Buhite, Robert J; Monaco, Edward A

2015-03-01

This article describes a technique for maintaining a maxillary Kennedy III partial removable dental prosthesis design in a patient who had non-restorable failing abutments by replacing the abutments with dental implants. Two implants were placed immediately after extraction of the abutment teeth in the anterior maxilla. After the implants were fully integrated, a Dolder bar attachment was fitted onto the implants. A new maxillary partial removable dental prosthesis was fabricated using the implants and the remaining natural teeth as abutments to restore function and esthetics. With the aid of dental implants, this Kennedy III maxillary removable dental prosthesis design could provide additional retention and support by promoting cross-arch stability and tissue, implant and tooth support. The patient's satisfaction was significantly increased.

The effects of uncinectomy and natural ostial dilatation on maxillary sinus ventilation: a clinical experimental study.

Science.gov (United States)

Kutluhan, Ahmet; Şalvız, Mehti; Bozdemir, Kazım; Kanbak, Orhan; Ulu, Mustafa; Yalçıner, Gökhan; Bilgen, Akif Sinan

2011-04-01

The purpose of this study was to determine the effect of uncinectomy without sinusotomy and natural ostial dilatation on maxillary sinus ventilation in chronic rhinosinusitis. Twenty patients with chronic rhinosinusitis were included in this study. The patients were randomly divided into two groups. Group 1 consisted of patients with uncinectomy (n = 10), while group 2 was made up of patients treated with natural ostial dilatation (n = 10). The CO(2) tension and pressure levels of the maxillary sinus during inspiration and expiration phases were obtained and compared before and after the procedures within and between the groups. The mean CO(2) tension levels in both groups were significantly decreased after the procedures. The mean maxillary sinus pressure during inspiration was significantly decreased to a negative value after uncinectomy; however, no significant change was observed during expiration. There were no significant changes in maxillary sinus pressures after natural ostial dilatation procedure. Both uncinectomy and natural ostial dilatation seem to be equally effective in decreasing maxillary sinus pCO(2) levels. The effects of decreased maxillary sinus pressure during inspiration after uncinectomy on mucociliary clearance and development mechanisms of chronic rhinosinusitis seem to be worth investigating.

Maxillary first molar with an O-shaped root morphology:report of a case

Institute of Scientific and Technical Information of China (English)

Yooseok Shin; Yemi Kim; Byoung-Duck Roh

2013-01-01

This case report is to present a maxillary first molar with one O-shaped root, which is an extended C-shaped canal system. Patient with chronic apical periodontitis in maxillary left first molar underwent replantation because of difficulty in negotiating all canals. Periapical radiographs and cone-beam computed tomography (CBCT) were taken. All roots were connected and fused to one root, and all canals seemed to be connected to form an O-shape. The apical 3 mm of the root were resected and retrograde filled with resin-modified glass ionomer. Intentional replantation as an alternative treatment could be considered in a maxillary first molar having an unusual O-shaped root.

Maxillary first molar with an O-shaped root morphology: report of a case.

Science.gov (United States)

Shin, Yooseok; Kim, Yemi; Roh, Byoung-Duck

2013-12-01

This case report is to present a maxillary first molar with one O-shaped root, which is an extended C-shaped canal system. Patient with chronic apical periodontitis in maxillary left first molar underwent replantation because of difficulty in negotiating all canals. Periapical radiographs and cone-beam computed tomography (CBCT) were taken. All roots were connected and fused to one root, and all canals seemed to be connected to form an O-shape. The apical 3 mm of the root were resected and retrograde filled with resin-modified glass ionomer. Intentional replantation as an alternative treatment could be considered in a maxillary first molar having an unusual O-shaped root.

Arytenoid and posterior vocal fold surgery for bilateral vocal fold immobility.

Science.gov (United States)

Young, VyVy N; Rosen, Clark A

2011-12-01

Many procedures exist to address the airway restriction often seen with bilateral vocal fold immobility. We review the most recent studies involving arytenoid and/or posterior vocal fold surgery to provide an update on the issues related to these procedures. Specific focus is placed on selection of the surgical approach and operative side, use of adjunctive therapies, and outcome measures including decannulation rate, revision and complication rate, and postoperative results. Ten studies were identified between 2004 and 2011. Modifications to the orginal transverse cordotomy and medial arytenoidectomy techniques continue to be investigated to seek improvement in dyspnea symptoms with minimal decline in voice and/or swallowing function. Decannulation rates for these approaches are high. Postoperative dysphagia appears to be less commonly observed but requires continued study. The use of mitomycin-C in these procedures has been poorly studied to date. Both transverse cordotomy and medial arytenoidectomy procedures result in high success rates. However, many questions related to these procedures remain unanswered, particularly with respect to preoperative and postoperative evaluations of voice quality, swallowing function, and pulmonary status. There is need for rigorous prospective clinical studies to address these many issues further.

Comparison of digital surface displacements of maxillary dentures based on noninvasive anatomic landmarks.

Science.gov (United States)

Norvell, Nicholas G; Korioth, Tom V; Cagna, David R; Versluis, Antheunis

2018-02-08

used. Changing the number and the location of anatomic landmarks had a small effect on the precision of the surface fitting. Repeated scans yielded high precision levels. In contrast, intraobserver repeatability had a larger error. In general, injection-molded dentures showed less displacement after polymerization than did the compression-molded ones. These differences were more substantial at the denture tooth level than on the intaglio surfaces. Anatomic noninvasive fiducials chosen at distinct locations of maxillary edentulous areas seem to be reliable markers for the superposition of corresponding digital surface scans. Maxillary dentures processed with the injection molding technique have minimal deformation. Posterior denture teeth displace in 3 dimensions with the compression molding technique. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Endodontic Management of Maxillary Second Molar with Two Palatal Roots: A Report of Two Cases

OpenAIRE

Patel, Surbhi; Patel, Pawan

2012-01-01

Endodontic treatment may sometimes fail because morphological features of the tooth adversely affect the treatment protocol. Maxillary second molars are recognized as usually having a single palatal root with a single palatal canal. The incidence of second palatal root in the maxillary second molar is very rare. Two cases are presented in this paper describing the endodontic management of a four-rooted maxillary second molar with two distinct palatal roots and canals and two distinct buccal r...

Operative Method for Transverse Colon Carcinoma: Transverse Colectomy Versus Extended Colectomy.

Science.gov (United States)

Chong, Choon Seng; Huh, Jung Wook; Oh, Bo Young; Park, Yoon Ah; Cho, Yong Beom; Yun, Seong Hyeon; Kim, Hee Cheol; Lee, Woo Yong

2016-07-01

The type of surgery performed for primary transverse colon cancer varies based on tumor characteristics and surgeon perspective. The optimal oncological outcome following different surgical options has not been clearly established, and transverse colectomy has shown oncological equivalence only in small cohort studies. Our aim was to compare long-term oncological outcomes after transverse colectomy versus extended resection for transverse colon cancer. This study is a retrospective review of prospectively collected data. This study was conducted at a tertiary care hospital. All patients treated for transverse colon cancer at the Samsung Medical Center between 1995 and 2013 were included. Oncological outcomes were compared between 2 groups of patients: a transverse colectomy group and an extended colectomy group (which included extended right hemicolectomy and left hemicolectomy). A total of 1066 patients were included, of whom 750 (70.4%) underwent extended right hemicolectomy, 127 (11.9%) underwent transverse colectomy, and 189 (17.7%) underwent left hemicolectomy. According to univariate analysis, surgical approach, histological type, tumor morphology, cancer T and N stage, cancer size, and lymphovascular invasion were significant factors contributing to disease-free survival (DFS). However, as seen in multivariate analysis, only node-positive disease (HR = 2.035 (1.188-3.484)), tumors with ulcerative morphology (HR = 3.643 (1.132-11.725)), and the presence of vascular invasion (HR = 2.569 (1.455-4.538)) were significant factors for DFS. Further analysis with a propensity-matched cohort between the transverse and extended colectomy groups demonstrated no significant differences in DFS and overall survival. This study was limited because it was performed at a single institution and it was retrospective in nature. In terms of perioperative and oncological outcomes, transverse colectomy and extended colectomy did not differ despite a shorter specimen length and

Stability of rapid maxillary expansion and facemask therapy: a long-term controlled study.

Science.gov (United States)

Masucci, Caterina; Franchi, Lorenzo; Defraia, Efisio; Mucedero, Manuela; Cozza, Paola; Baccetti, Tiziano

2011-10-01

The aim of this prospective controlled study was to evaluate the long-term effects of rapid maxillary expansion and facemask therapy in Class III subjects. Twenty-two subjects (9 boys, 13 girls; mean age, 9.2 years ± 1.6) with Class III disharmony were treated consecutively with rapid maxillary expansion and facemask therapy followed by fixed appliances. The patients were reevaluated at the end of the 2-phase treatment (mean age, 14.5 years ± 1.9) and then recalled about 8.5 years after the end of rapid maxillary expansion and facemask treatment (mean age, 18.7 years ± 2.1). Two groups of controls with untreated Class III malocclusion were used for statistical comparisons of the short-term and long-term intervals. Statistical comparisons were performed with the Mann-Whitney U test. In the long term, no significant differences in maxillary changes were recorded, whereas the treatment group showed significantly smaller increases in mandibular protrusion. The sagittal maxillomandibular skeletal variables maintained significant improvements in the treatment group vs the control groups. In the long term, rapid maxillary expansion and facemask therapy led to successful outcomes in about 73% of the Class III patients. Favorable skeletal changes were mainly due to significant improvements in the sagittal position of the mandible. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Volumetric analysis of maxillary sinuses of Zulu and European crania by helical, multislice computed tomography.

Science.gov (United States)

Fernandes, C L

2004-11-01

The volumes of the maxillary sinuses are of interest to surgeons operating endoscopically as variation in maxillary sinus volume may mean variation in anatomical landmarks. Other surgical disciplines, such as dentistry, maxillo-facial surgery and plastic surgery, may benefit from this information. To compare the maxillary sinus volumes of dried crania from cadavers of European and Zulu descent, with respect to ethnic group and gender. Helical, multislice computed tomography (CT) was performed using 1-mm coronal slices. The area for each slice was obtained by tracing the outline of each slice. The CT machine calculated a volume by totalling the slices for each sinus. Ethnic and gender variations were found in the different groups. It was found that European crania had significantly larger antral volumes than Zulu crania and men had larger volumes than women. Race and gender interaction was also assessed, as was maxillary sinus side. A variation in maxillary sinus volume between different ethnic groups and genders exists, and surgeons operating in this region should be aware of this.

Nonsurgical, nonextraction management of impacted maxillary canine

Directory of Open Access Journals (Sweden)

Jasneet Singh

2018-01-01

Full Text Available NS, a 12 year 2 months old female patient, presented with the chief complaint of irregular teeth. Diagnosis revealed skeletal Class II jaw base relation, with average (toward vertical growth pattern, dentoalveolar angles Class I molar relationship with severe crowding in upper and moderate crowding in the lower arch, normally positioned maxillary incisors but proclined lower incisors, “V” shape constricted maxillary arch with first premolar in crossbite, overretained deciduous molar and a high placed buccoversion canine in the first quadrant and an impacted canine in the second quadrant, constricted mandibular arch with first premolar blocked out in the third quadrant. Treatment with a nonsurgical, nonextraction treatment plan by expansion of the upper arch and taking advantage of natural eruptive forces of the tooth was planned. The final outcome solved the patient's complaints and achieved an esthetically pleasing and functionally adequate occlusal result.

CT analyses of the location of the maxillary third molar in relation to panoramic radiographic appearance

International Nuclear Information System (INIS)

Obayashi, Naofumi; Ariji, Yoshiko; Goto, Masakazu; Izumi, Masahiro; Naitoh, Munetaka; Kurita, Kenichi; Shimozato, Kazuo; Ariji, Eiichiro

2009-01-01

We compared the relationship between anatomical structures analyzed by panoramic radiographs and CT images of uninfected impacted maxillary third molars and investigated the pathway of infection originating from pericoronitis of maxillary third molars. Patients (n=62) with uninfected impacted maxillary third molars and patients (n=8) with odontogenic infection originating from pericoronitis of the maxillary third molars were selected from an image database. CT and panoramic images were evaluated separately by an oral surgeon and a radiologist for the vertical position of the tooth, the presence of bone around the crown, proximity to the maxillary sinus, visibility of masticatory muscles, and mesiodistal and buccopalatal inclinations. In uninfected patients, a significant correlation was observed between the vertical positions evaluated by the two methods. Of the third molars, 79 (63.7%) were identified as vertical type on both panoramic and CT images. Regarding the maxillary sinus, of the 19 molars classified as the separate type on panoramic images, 2 (10.5%) were identified as the close type on CT. CT examination revealed the involvement of buccal cortical plates and the buccal space in the majority of infected patients. CT images revealed that 94 molars (75.8%) showed vertical type on the buccopalatal inclination and that 45 impacted molars (36.3%) showed bone defects in the buccal area. Infections originating from pericoronitis of the maxillary third molar showed involvement of the buccal cortical plates, the buccal space, and other spaces, which were clearly depicted on CT images. (author)

Maxillary Swing Approach for Removal of Palatal Carcinoma: A Modified Procedure

Directory of Open Access Journals (Sweden)

Tsutomu Nomura

2018-01-01

Full Text Available Introduction. We report a modification of the maxillary swing approach to remove a palatal tumor while preserving the anterior alveolar area. Methods. Case report using clinical records. Results. The patient was a 54-year-old male. TNM grade was T4bN0M0, and invasion to the base of the pterygoid process was seen. Two courses of induction chemotherapy were administered prior to the operation. Because there was no evidence of anterior maxillary invasion, the maxillary swing approach was chosen. The left anterior maxilla was cut and swung laterally, preserving the blood supply. After removal of the palatal tumor, the maxilla was repositioned and the defect was restored with an anterior lateral thigh flap. Postoperative course was typical, and facial appearance, speech, and masticatory function were satisfactory. Conclusions. This technique is particularly useful for preserving appearance as well as speech and mastication.